ITC/USA/'90; Proceedings of the International Telemetering Conference, Las Vegas, NV, Oct. 29-Nov. 2, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

This conference presents papers in the fields of airborne telemetry, measurement technology, video instrumentation and monitoring, tracking and receiving systems, and real-time processing in telemetry. Topics presented include packet telemetry ground station simulation, a predictable performance wideband noise generator, an improved drone tracking control system transponder, the application of neural networks to drone control, and an integrated real-time turbine engine flight test system.

FORUM ON INNOVATIVE HAZARDOUS WASTE TREATMENT TECHNOLOGIES DOMESTIC AND INTERNATIONAL - 2nd Philadelphia, Pennsylania, MAY 14-16, 1990 - Technical Papers (EPA/540/2-90/010)

EPA Science Inventory

As a result of the high level of interest in innovative hazardous waste control technologies, U.S. EPA's Office of Solid Waste and Emergency Response (OSWER) and Risk Reduction Engineering Laboratory (RREL) jointly conducted this conference. The conference consisted of presenta...

Corps of Engineers Structural Engineering Conference Held in St. Johns County, Florida on 8-12 July 1991. Volume 2

DTIC Science & Technology

1992-12-01

problems. Leadership forums were conducted for chiefs of structural design from each office for both military and civil works areas. (Continued) 14...Photographs ....................................... 7 Maintaining Design Quality in the Corps of Engineers .................... II Expedited Design and...25 Portugues Dam Monolith Layout and Survey Control ...................... 33 Cofferdam Design Problems, Point Marion Lock

PREFACE: International Conference on Applied Sciences (ICAS2014)

NASA Astrophysics Data System (ADS)

Lemle, Ludovic Dan; Jiang, Yiwen

2015-06-01

The International Conference on Applied Sciences (ICAS2014) took place in Hunedoara, Romania from 2-4 October 2014 at the Engineering Faculty of Hunedoara. The conference takes place alternately in Romania and in P.R. China and is organized by "Politehnica" University of Timisoara, Romania, and Military Economics Academy of Wuhan, P.R. China, with the aim to serve as a platform for exchange of information between various areas of applied sciences and to promote the communication between scientists of different nations, countries and continents. The topics of the conference covered a comprehensive spectrum of issues: 1. Economical Sciences 2. Engineering Sciences 3. Fundamental Sciences 4. Medical Sciences The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has the potential for application in economics, defense, medicine, etc. There were nearly 100 registered participants from six countries, and four invited and 56 oral talks were delivered during the two days of the conference. Based on the work presented at the conference, selected papers are included in this volume of IOP Conference Series: Materials Science and Engineering. These papers present new research in the various fields of Materials Engineering, Mechanical Engineering, Computer Engineering, and Mathematical Engineering. It is our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering to the scientific community to promote further research in these areas. We sincerely hope that the papers published in this volume will contribute to the advancement of knowledge in their respective fields.

FOREWORD: 9th Curtin University of Technology Science and Engineering International Conference 2014 (CUTSE2014)

NASA Astrophysics Data System (ADS)

Chieng Chen, Vincent Lee

2015-04-01

A very warm welcome to all participants of the 9th Curtin University Technology, Science and Engineering (CUTSE) Conference 2014. This annual conference dates back to 2006 when the first Curtin University of Technology Science and Engineering (CUTSE) Conference was held in Curtin University, Miri Sarawak. CUTSE Conference was initially intended for Curtin's undergraduates such that they are able to experience the presentation of their work in a conference environment. As time passes and following the urge of knowledge dissemination, CUTSE Conference is hence open to public. This year the Department of Mechanical Engineering has been given the honour to organize the 9th CUTSE Conference. It has been a pleasure to watch CUTSE grow from strength to strength over the years. This year, our theme is "Discovering, Innovating and Engineering". We hope that it is in this spirit that CUTSE participants may align their respective work, such that we all aim for a greater and better implementation of "Discovering, Innovating and Engineering". The 9th CUTSE Conference 2014 is an excellent avenue for researchers, engineers, scientists, academicians, professionals from industry and students to share their research findings and initiate further collaborations in their respective fields. Parallel sessions in Mechanical, Electrical, Computer, Civil and Chemical engineering as well as the sciences will be hosted over a period of two days. Each year, the conference attracts participation from a number of countries in addition to Malaysia and Australia. In addition, student participants will get the opportunity to present their research projects and gain valuable feedback from industry professionals. This year the Conference will be organised by the Department of Mechanical Engineering of Curtin Sarawak's School of Engineering and Science in collaboration with The Institute of Engineers Malaysia, Miri Branch. On behalf of the organizing committee, I would like to thank this year's sponsors and supporters. We appreciate your support for CUTSE 2014 and in research and development, and your foresight in nurturing cutting edge research into industrial applications. CUTSE 2014 would not be possible without the dedicated work and efforts of the organizing committee, who worked tirelessly in all aspects of the conference organization. I thank you for your hard work and commitment towards making CUTSE 2014 a success. Selamat Datai (Welcome) and enjoy the conference. Dr Vincent Lee Chieng Chen Organizing Chairperson, 9th CUTSE Conference 2014

Noise control in aeroacoustics; Proceedings of the 1993 National Conference on Noise Control Engineering, NOISE-CON 93, Williamsburg, VA, May 2-5, 1993

NASA Technical Reports Server (NTRS)

Hubbard, Harvey H. (Editor)

1993-01-01

In the conference over 100 papers were presented in eight sessions: (1) Emission: Noise Sources; (2) Physical Phenomena; (3) Noise ControlElements; (4) Vibration and Shock: Generation, Transmission, Isolation, and Reduction; (5) Immission: Physical Aspects of Environmental Noise; (6) Immission: Effects of Noise; (7) Analysis; and (8) Requirements. In addition, the distinguished lecture series included presentations on the High Speed Civil Transport and on research from the United Kingdom on aircraft noise effects.

Applied Nonlinear Dynamics and Stochastic Systems Near The Millenium. Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kadtke, J.B.; Bulsara, A.

These proceedings represent papers presented at the Applied Nonlinear Dynamics and Stochastic Systems conference held in San Diego, California in July 1997. The conference emphasized the applications of nonlinear dynamical systems theory in fields as diverse as neuroscience and biomedical engineering, fluid dynamics, chaos control, nonlinear signal/image processing, stochastic resonance, devices and nonlinear dynamics in socio{minus}economic systems. There were 56 papers presented at the conference and 5 have been abstracted for the Energy Science and Technology database.(AIP)

Proceedings of the NASA Conference on Space Telerobotics, volume 3

NASA Technical Reports Server (NTRS)

Rodriguez, Guillermo (Editor); Seraji, Homayoun (Editor)

1989-01-01

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research.

Women in engineering conference: capitalizing on today`s challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metz, S.S.; Martins, S.M.

This document contains the conference proceedings of the Women in Engineering Conference: Capitalizing on Today`s Challenges, held June 1-4, 1996 in Denver, Colorado. Topics included engineering and science education, career paths, workplace issues, and affirmative action.

The Pre-Engineering Curriculum Proceedings of the Annual CSU Conference on Innovation in Engineering Education. (1st, San Jose, California, April 26, 1991).

ERIC Educational Resources Information Center

California State Univ., Engineering Council for Teaching and Learning.

This document provides the keynote address and papers delivered at the 1991 California State University Conference on Innovation in Engineering Education which focused on the pre-engineering curriculum. The conference was convened as a collaborative effort by faculty to address the following issues in engineering education: (1) the attraction and…

Annual Conference Abstracts

ERIC Educational Resources Information Center

Journal of Engineering Education, 1972

1972-01-01

Includes abstracts of papers presented at the 80th Annual Conference of the American Society for Engineering Education. The broad areas include aerospace, affiliate and associate member council, agricultural engineering, biomedical engineering, continuing engineering studies, chemical engineering, civil engineering, computers, cooperative…

Proceedings of the NASA Conference on Space Telerobotics, volume 2

NASA Technical Reports Server (NTRS)

Rodriguez, Guillermo (Editor); Seraji, Homayoun (Editor)

1989-01-01

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research.

International conference on Recent Advances in Aerospace Engineering (ICRAAE-2017)

NASA Astrophysics Data System (ADS)

2017-10-01

Introduction The First International conference on Recent Advances in Aerospace Engineering (ICRAAE-2017) will be conducted by the Department of Aerospace Engineering at Karunya University, Coimbatore, Tamilnadu, India, on 3rd and 4th March, 2017. The conference aims to bring together students, academicians, leading scientists, researchers and industrialists working in diverse fields of Aerospace Engineering. This conference provides an inter-disciplinary platform for the educators, researchers and practitioners to present, share and discuss the recent trends, innovations, concerns and solutions in the cutting edge technologies of Aerospace Engineering for mutual benefit and the growth of the nation. Objectives The conference is devoted to benefit the participants who will have the opportunity to gain insight into state-of-the-art technologies in the field of Aerospace Engineering by the expert lectures of scientists and pioneering researchers from India and abroad. In addition, the two-day conference will enable knowledge sharing by personnel involved in active research working on the recent developments in this diverse field. List of International Deep Drawing Research Group, Conference Topics, Facts and Statistics, Achknowledgement, Keynote Speakers, Scientific Committee, Editors all are available in this PDF.

IEEE Conference on Software Engineering Education and Training (CSEE&T 2012) Proceedings (25th, Nanjing, Jiangsu, China, April 17-19, 2012)

ERIC Educational Resources Information Center

IEEE Conference on Software Engineering Education and Training, Proceedings (MS), 2012

2012-01-01

The Conference on Software Engineering Education and Training (CSEE&T) is the premier international peer-reviewed conference, sponsored by the Institute of Electrical and Electronics Engineers, Inc. (IEEE) Computer Society, which addresses all major areas related to software engineering education, training, and professionalism. This year, as…

International Conference on Bio-Medical Instrumentation and related Engineering and Physical Sciences (BIOMEP 2015)

NASA Astrophysics Data System (ADS)

2015-09-01

The International Conference on Bio-Medical Instrumentation and related Engineering and Physical Sciences (BIOMEP 2015) took place in the Technological Educational Institute (TEI) of Athens, Greece on June 18-20, 2015 and was organized by the Department of Biomedical Engineering. The scope of the conference was to provide a forum on the latest developments in Biomedical Instrumentation and related principles of Physical and Engineering sciences. Scientists and engineers from academic, industrial and health disciplines were invited to participate in the Conference and to contribute both in the promotion and dissemination of the scientific knowledge.

PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

NASA Astrophysics Data System (ADS)

Abu Bakar, Rosli

2012-09-01

The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our thanks to the expert reviewers who have spared their time reviewing the papers. We also highly appreciate the assistance offered by many volunteers in the preparation of the conference proceedings. All papers in ICMER 2011 have the opportunity to be published in IOP Conference Series: Materials Science and Engineering, (indexed by Scopus, Ei Compendex, Inspec), International Journal of Automotive and Mechanical Engineering (IJAME) and Journal of Mechanical Engineering and Sciences (JMES). Professor Dr Hj Rosli Abu Bakar Chairman ICMER 2011

NASA/University Conference on Aeronautics

NASA Technical Reports Server (NTRS)

1975-01-01

The proceedings of a conference on the future of aeronautics are presented. The subjects discussed include the following: (1) aeronautics and the education of the engineer, (2) technical trends in aeronautics, and (3) the role of the university in aeronautics. The technical trends in aeronautics are concerned with aircraft noise control, the effect of the aircraft on the environment, airborne electronics for automated flight, and trends in aircraft design.

Noise control in aeroacoustics; Proceedings of the 1993 National Conference on Noise Control Engineering, NOISE-CON 93, Williamsburg, VA, May 2-5, 1993

NASA Astrophysics Data System (ADS)

Hubbard, Harvey H.

In the conference over 100 papers were presented in eight sessions: (1) Emission: Noise Sources; (2) Physical Phenomena; (3) Noise ControlElements; (4) Vibration and Shock: Generation, Transmission, Isolation, and Reduction; (5) Immission: Physical Aspects of Environmental Noise; (6) Immission: Effects of Noise; (7) Analysis; and (8) Requirements. In addition, the distinguished lecture series included presentations on the High Speed Civil Transport and on research from the United Kingdom on aircraft noise effects. For individual titles, see A95-90089 through A95-90141.

New frontiers in biomedical science and engineering during 2014-2015.

PubMed

Liu, Feng; Lee, Dong-Hoon; Lagoa, Ricardo; Kumar, Sandeep

2015-01-01

The International Conference on Biomedical Engineering and Biotechnology (ICBEB) is an international meeting held once a year. This, the fourth International Conference on Biomedical Engineering and Biotechnology (ICBEB2015), will be held in Shanghai, China, during August 18th-21st, 2015. This annual conference intends to provide an opportunity for researchers and practitioners at home and abroad to present the most recent frontiers and future challenges in the fields of biomedical science, biomedical engineering, biomaterials, bioinformatics and computational biology, biomedical imaging and signal processing, biomechanical engineering and biotechnology, etc. The papers published in this issue are selected from this Conference, which witness the advances in biomedical engineering and biotechnology during 2014-2015.

Expedition 27 Docking

NASA Image and Video Library

2011-04-06

Top officials from the Russian Federal Space Agency and NASA hold a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Thursday, April 7, 2011. The Soyuz TMA-21 docked to the International Space Station carrying Expedition 27 Soyuz Commander Alexander Samokutyaev, NASA Flight Engineer Ron Garan and Russian Flight Engineer Andrey Borisenko. Photo Credit: (NASA/Carla Cioffi)

The International Congress of Mechanical Engineering and Agricultural Sciences - CIIMCA 2013

NASA Astrophysics Data System (ADS)

Remolina-Millán, Aduljay; Hernández-Arroyo, Emil

2014-06-01

The organizing committee of The International Congress of Mechanical Engineering and Agricultural Sciences - CIIMCA 2013 - are pleased to present CIIMCA-2013: the first international conference focused on subjects of materials science, mechanical engineering and renewable energy organized by Mechanical Engineering Faculty of the ''Universidad Pontificia Bolivariana'' in Bucaramanga, Colombia. This conference aims to be a place to produce discussions on whole topics of the congress, between the scientists of Colombia and the world. We strongly believe that knowledge is fundamental to the development of our countries. For that reason this multidisciplinary conference is looking forward to integrate engineering, agricultural science and nanoscience and nanotechnology to produce a synergy of this area of knowledge and to achieve scientific and technological developments. Agriculture is a very important topic for our conference; in Colombia, agricultural science needs more attention from the scientific community and the government. In the Faculty of Mechanical Engineering we are beginning to work on these issues to produce knowledge and improve the conditions in our country. The CIIMCA conference is a great opportunity to create interpersonal relationships and networks between scientists around the world. The interaction between scientists is very important in the process of the construction of knowledge. The general chairman encourages and invites you to make friends, relationships and participate strongly in the symposia and all program activities. PhD Aduljay Remolina-Millán Principal Chairman, International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA Msc Emil Hernández-Arroyo Principal Chairman, International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA Conference photograph Conference photograph 'Universidad Pontificia Bolivariana seccional Bucaramanga' host of the first International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA 2013 - Floridablanaca, Colombia. Conference photograph Closure of CIIMCA 2013. Details of the editorial committee and acknowledgements are available in the PDF.

Caribbean Engineer and Environmental Conference (CSL Issue Paper, Volume 14-08, November 2008)

DTIC Science & Technology

2008-11-01

Leadership, conducted a successful four day Engineer and Environment Conference between 2 and 5 September 2008 in San Jose , Puerto Rico. The purpose of...ANSI Std Z39-18 CONFERENCE SCHEDULE The Caribbean Engineer and Environmental Conference was conducted at the El San Juan Hotel in San Juan, Puerto...i.e. tsunamis, earthquakes, and volcanoes • Officials must develop ways to overcome communication problems between civil and military assets• Overall

PREFACE: Selected papers from the Fourth Topical Conference on Nanoscale Science and Engineering of the American Institute of Chemical Engineers

NASA Astrophysics Data System (ADS)

Wong, Michael S.; Lee, Gil U.

2005-07-01

This special issue of Nanotechnology contains research papers contributed by the participants of the Fourth Topical Conference on Nanoscale Science and Engineering at the Annual Meeting of the American Institute of Chemical Engineers (AIChE), which was held in Austin, Texas, USA, 7-12 November, 2004. This conference saw 284 oral presentations from institutions around the world, which is the highest number for this topical conference series to date. These presentations were organized into 64 sessions, covering the range of nanotechnology subject areas in which chemical engineers are currently engaged. These sessions included the following areas. • Fundamentals: thermodynamics at the nanoscale; applications of nanostructured fluids; transport properties in nanophase and nanoscale systems; molecular modelling methods; self and directed assembly at the nanoscale; nanofabrication and nanoscale processing; manipulation of nanophases by external fields; nanoscale systems; adsorption and transport in carbon nanotubes; nanotribology; making the transition from materials and phenomena to new technologies; operation of micro-and nano-systems. • Materials: nanoparticle synthesis and stabilization; nanoscale structure in polymers; nanotemplating of polymers; synthesis of carbon nanotubes and nanotube-based materials; nanowires; nanoparticle assemblies and superlattices; nanoelectronic materials; self-assembly of templated inorganic materials; nanostructured hybrid organic/inorganic materials; gas phase synthesis of nanoparticles; multicomponent structured particles; nano energetic materials; liquid-phase synthesis of nanoparticles. • Energy: synthesis and characterization of nanostructured catalytic materials; nanomaterials and devices for energy applications. • Biotechnology: nanobiotechnology; nanotechnology for the biotechnology and pharmaceuticals industries; nanotechnology and nanobiotechnology for sensors; advances in biomaterials, bionanotechnology, biomimetic systems and tissue engineering; nanotechnology for drug delivery and imaging; bionanotechnology in cancer and cardiovascular disease; nanostructured biomaterials; nanotechnology in bioengineering; nanofabrication of biosensing devices. We are pleased to present a selection of research papers in this special issue of Nanotechnology on behalf of the Nanoscale Science and Engineering Forum (NSEF). NSEF was established in 2001 as a new division of AIChE to promote nanotechnology efforts in chemical engineering. The chemical engineering discipline deals with the production and processing of chemicals and materials, and does so through a fundamental understanding of the core issues of transport, thermodynamics, and kinetics that exist at multiple length scales. Thus, it should come as no surprise that chemical engineers have been pursuing nanotechnology research for the last fifty years. For example, fuel production has benefited immensely from improved catalysts in which their pore structure is controlled with nanoscale precision, and polymer properties have been improved by controlling the polymer supramolecular structure at the nanometre scale. Chemical engineering will continue to make important contributions to nanotechnology, and will play a critical role in the transition from basic science and engineering research to commercial applications. We would like to thank all of the authors who contributed to this special issue; the three NSEF poster presentation award winners for their papers (Sureshkumar, Sunkara, and Rinaldi groups); Dr Nina Couzin, Publisher of Nanotechnology, for her support and enthusiasm for this project; Drs Sharon Glotzer and Dan Coy who chaired the topical conference; and Drs Meyya Meyyappan and Brett Cruden (NASA Ames Research Center) for their assistance in the initial planning stages. We also take this opportunity to thank the many people and organizations who have supported the 2004 topical conference along the way, which include all the session chairs, Hyperion Catalysis International, Inc., Nanophase Technologies, Inc., and the executive board of the NSEF.

Fifth National Seismic Conference on Bridges & Highways : innovations in earthquake engineering for highway structures

DOT National Transportation Integrated Search

2007-02-01

This document is the conference program of the 5th National Seismic Conference on Bridges and Highways. The conference was held in San Francisco on September 18-20, 2006 and attracted over 300 engineers, academician, and students from around the worl...

Space Shuttle Technical Conference, part 1

NASA Technical Reports Server (NTRS)

Chaffee, N. (Compiler)

1985-01-01

Articles providing a retrospective presentation and documentation of the key scientific and engineering achievements of the Space Shuttle Program are compiled. Topics areas include: (1) integrated avionics; (2) guidance, navigation, and control; (3) aerodynamics; (4) structures; (5) life support; environmental control; and crew station; and (6) ground operations.

Inter-noise 89 - Engineering for environmental noise control; Proceedings of the International Conference on Noise Control Engineering, Newport Beach, CA, Dec. 4-6, 1989. Vols. 1 & 2

NASA Astrophysics Data System (ADS)

Maling, George C., Jr.

Recent advances in noise analysis and control theory and technology are discussed in reviews and reports. Topics addressed include noise generation; sound-wave propagation; noise control by external treatments; vibration and shock generation, transmission, isolation, and reduction; multiple sources and paths of environmental noise; noise perception and the physiological and psychological effects of noise; instrumentation, signal processing, and analysis techniques; and noise standards and legal aspects. Diagrams, drawings, graphs, photographs, and tables of numerical data are provided.

Expedition 23 Docking

NASA Image and Video Library

2010-04-03

Kirk Shireman, NASA's deputy ISS program manager, answers reporter’s questions during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Sunday, April 4, 2010. The Soyuz TMA-18 docked to the International Space Station carrying Expedition 23 Soyuz Commander Alexander Skvortsov, Flight Engineer Mikhail Kornienko and NASA Flight Engineer Tracy Caldwell Dyson. Photo Credit: (NASA/Carla Cioffi)

Expedition 23 Docking

NASA Image and Video Library

2010-04-03

Alexei Krasnov, Director of Manned Space Programs Department, Roscosmos, listens to reporter’s questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Sunday, April 4, 2010. The Soyuz TMA-18 docked to the International Space Station carrying Expedition 23 Soyuz Commander Alexander Skvortsov, Flight Engineer Mikhail Kornienko and NASA Flight Engineer Tracy Caldwell Dyson. Photo Credit: (NASA/Carla Cioffi)

Expedition 23 Docking

NASA Image and Video Library

2010-04-03

Kirk Shireman, right, NASA's deputy ISS program manager, answers reporter’s questions during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Sunday, April 4, 2010. The Soyuz TMA-18 docked to the International Space Station carrying Expedition 23 Soyuz Commander Alexander Skvortsov, Flight Engineer Mikhail Kornienko and NASA Flight Engineer Tracy Caldwell Dyson. Photo Credit: (NASA/Carla Cioffi)

24th Annual Logistics Conference and Exhibition

DTIC Science & Technology

2008-03-13

Mission / Financial • Beliefs • Organizational Cultures Management and Control Systems • Agency Mission Statements • Process Metrics/Key Performance... Juan Arcocha, USA, Deputy Director for Logistics and Engineering, USNORTHCOM MG John Basilica, Jr., ARNG, Director of Logistics, J4, National Guard...Bureau Panelists:  COL Juan Arcocha, USA, Deputy Director for Logistics and Engineering, USNORTHCOM  MG John Basilica, Jr., ARNG, Director of

Helicopter Acoustics, part 2. [conferences

NASA Technical Reports Server (NTRS)

1978-01-01

Exterior and interior helicopter noise problems are addressed from the physics and engineering as well as the human factors point of view. Noise regulation concepts, human factors and criteria, rotor noise generation and control, design, operations and testing for noise control, helicopter noise prediction, and research tools and measurements are covered.

Metabolic Engineering X Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flach, Evan

The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

Hedberg Research Conference on Fundamental Controls on Flow in Carbonates: Request for Travel Support for Post-Doctoral Fellows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pyrak-Nolte, Laura J.

Carbonate reservoirs pose a scientific and engineering challenge to geophysical prediction and monitoring of fluid flow in the subsurface. Difficulties in interpreting hydrological, reservoir and other exploration data arise because carbonates are composed of a hierarchy of geological structures, constituents and processes that span a wide spectrum of length and time scales. What makes this problem particularly challenging is that length scales associated with physical structure and processes are often not discrete, but overlap, preventing the definition of discrete elements at one scale to become the building blocks of the next scale. This is particularly true for carbonates where complicatedmore » depositional environments, subsequent post-deposition diagenesis and geochemical interactions result in pores that vary in scale from submicron to centimeters to fractures, variation in fabric composition with fossils, minerals and cement, as well as variations in structural features (e.g., oriented inter- and intra layered - interlaced bedding and/or discontinuous rock units). In addition, this complexity is altered by natural and anthropogenic processes such as changes in stress, fluid content, reactive fluid flow, etc. Thus an accurate geophysical assessment of the flow behavior of carbonate reservoirs requires a fundamental understanding of the interplay of textural and structural features subjected to physical processes that affect and occur on various length and time scales. To address this complexity related to carbonates, a Hedberg conference on “Fundamental Controls on Flow in Carbonates” was held July 8 to 13, 2012, to bring together industry and academic scientists to stimulate innovative ideas that can accelerate research advances related to flow prediction and recovery in carbonate reservoirs. Participants included scientist and engineers from multiple disciplines (such as hydrology, structural geology, geochemistry, reservoir engineering, geophysics, geomechanics, numerical modeling, physical experiments, sedimentology, well-testing, statistics, mathematics, visualization, etc.) who encompass experience as well as the latest advances in these multi-faceted fields. One of the goals was to include early career scientists and engineers (post-doctoral fellows, assistant professors, etc.). With this grant 10 early career scientists and engineers were supported to attend the conference. This reports contains a brief overview of the conference and the list of support participants supported by this grant. Full details of the outcomes of the conference are given in the publication found in the Attachment section of this report.« less

Soaring to New Heights in Engineering Education. Frontiers in Education (FIE) Conference Proceedings (42nd, Seattle, Washington, October 3-6, 2012)

ERIC Educational Resources Information Center

Frontiers in Education Conference (MS), 2012

2012-01-01

The lifetime of Frontiers in Education (FIE), 42 years and counting, has been a time of many innovations in engineering and computing education. The FIE Conference has become the premiere conference for presentation and discussion of excellent educational research and innovative curricula in engineering education. This accomplishment would not…

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Second SIAM Conference on Computational Science and Engineering was held in San Diego from February 10-12, 2003. Total conference attendance was 553. This is a 23% increase in attendance over the first conference. The focus of this conference was to draw attention to the tremendous range of major computational efforts on large problems in science and engineering, to promote the interdisciplinary culture required to meet these large-scale challenges, and to encourage the training of the next generation of computational scientists. Computational Science & Engineering (CS&E) is now widely accepted, along with theory and experiment, as a crucial third modemore » of scientific investigation and engineering design. Aerospace, automotive, biological, chemical, semiconductor, and other industrial sectors now rely on simulation for technical decision support. For federal agencies also, CS&E has become an essential support for decisions on resources, transportation, and defense. CS&E is, by nature, interdisciplinary. It grows out of physical applications and it depends on computer architecture, but at its heart are powerful numerical algorithms and sophisticated computer science techniques. From an applied mathematics perspective, much of CS&E has involved analysis, but the future surely includes optimization and design, especially in the presence of uncertainty. Another mathematical frontier is the assimilation of very large data sets through such techniques as adaptive multi-resolution, automated feature search, and low-dimensional parameterization. The themes of the 2003 conference included, but were not limited to: Advanced Discretization Methods; Computational Biology and Bioinformatics; Computational Chemistry and Chemical Engineering; Computational Earth and Atmospheric Sciences; Computational Electromagnetics; Computational Fluid Dynamics; Computational Medicine and Bioengineering; Computational Physics and Astrophysics; Computational Solid Mechanics and Materials; CS&E Education; Meshing and Adaptivity; Multiscale and Multiphysics Problems; Numerical Algorithms for CS&E; Discrete and Combinatorial Algorithms for CS&E; Inverse Problems; Optimal Design, Optimal Control, and Inverse Problems; Parallel and Distributed Computing; Problem-Solving Environments; Software and Wddleware Systems; Uncertainty Estimation and Sensitivity Analysis; and Visualization and Computer Graphics.« less

Proceedings of the American Power Conference. Volume 60-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

McBride, A.E.

1998-12-01

The American Power Conference, 60th annual meeting, 1998, addressed reliability and economy as related to technology for competition and globalization. The topics of the papers included needs and advances in power engineering education, global climate change, distributed generation, the critical role of the nations largest coal, nuclear and hydropower stations, advances in generation technology, financing electric power projects, successful deregulation, year 2000 outlook for equipment conflict with information and control, system planning, asset management, relay and communication, particulate and SO{sub x} control, environmental protection compliance strategies, fuel cells, gas turbines, renewable energy, steam turbines, and cost reduction strategies.

Proceedings of the American Power Conference. Volume 60-2

DOE Office of Scientific and Technical Information (OSTI.GOV)

McBride, A.E.

1998-12-01

The American Power Conference, 60th annual meeting, 1998, addressed reliability and economy as related to technology for competition and globalization. The topics of the papers included needs and advances in power engineering education, global climate change, distributed generation, the critical role of the nations largest coal, nuclear and hydropower stations, advances in generation technology, financing electric power projects, successful deregulation, year 2000 outlook for equipment conflict with information and control, system planning, asset management, relay and communication, particulate and SO{sub x} control, environmental protection compliance strategies, fuel cells, gas turbines, renewable energy, steam turbines, and cost reduction strategies.

Expedition 27 Docking

NASA Image and Video Library

2011-04-06

Russian Federal Space Agency Director of Human Space Flight, Alexey Krasnov, third from right, answers reporter’s questions during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Thursday, April 7, 2011. The Soyuz TMA-21 docked to the International Space Station carrying Expedition 27 Soyuz Commander Alexander Samokutyaev, NASA Flight Engineer Ron Garan and Russian Flight Engineer Andrey Borisenko. Photo Credit: (NASA/Carla Cioffi)

Expedition 26 Docking

NASA Image and Video Library

2010-12-18

Vitaly Davyidov, second from right, Deputy Head of the Russian Federal Space Agency, answers reporter’s questions during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Saturday, Dec. 18, 2010. The Soyuz TMA-20 docked to the International Space Station carrying Expedition 26 Soyuz Commander Dmitry Kondratyev, Flight Engineer Catherine Coleman and European Space Agency Flight Engineer Paolo Nespoli. Photo Credit: (NASA/Carla Cioffi)

Expedition 28 Docking

NASA Image and Video Library

2011-06-10

Top officials from the Russian Federal Space Agency and NASA hold a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Friday, June 10, 2011. The Soyuz TMA-02M docked to the International Space Station carrying Expedition 28 Soyuz Commander Sergei Volkov, NASA Flight Engineer Mike Fossum and JAXA (Japanase Aerospace Exploration Agency) Flight Engineer Satoshi Furukawa. Photo Credit: (NASA/Carla Cioffi)

Performance, Life, and Operability Trade-Offs in VCE Control Logic Design.

DTIC Science & Technology

1981-08-01

primarily USAF Actuarial Reports), including all engine returns to the intermediate or depot shop - scheduled and unscheduled - engine and non-engine...Length (Min) Training * Air to Air (ATA) 30 576 87 e Air to Ground (ATG) 30 363 128 Combat e Air Superiority ( ASM ) 13 75 228 e Intercept 2 31 94... ASME , 16th Joint Propulsion Conference, Paper No. ALAA-80-1115, June 30 - July 2, 1980. 2. Akimov, V.M., Starik, D.E., et al., The Economic Efficiency

Highlights From the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care

PubMed Central

Kamath, Janine R. A.; Osborn, John B.; Roger, Véronique L.; Rohleder, Thomas R.

2011-01-01

In August 2010, the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care was held. The continuing mission of the conference is to gather a multidisciplinary group of systems engineers, clinicians, administrators, and academic professors to discuss the translation of systems engineering methods to more effective health care delivery. Education, research, and practice were enhanced via a mix of formal presentations, tutorials, and informal gatherings of participants with diverse backgrounds. Although the conference promotes a diversity of perspectives and methods, participants are united in their desire to find ways in which systems engineering can transform health care, especially in the context of health care reform and other significant changes affecting the delivery of health care. PMID:21803959

Advances in biomedical engineering and biotechnology during 2013-2014.

PubMed

Liu, Feng; Wang, Ying; Burkhart, Timothy A; González Penedo, Manuel Francisco; Ma, Shaodong

2014-01-01

The 3rd International Conference on Biomedical Engineering and Biotechnology (iCBEB 2014), held in Beijing from the 25th to the 28th of September 2014, is an annual conference that intends to provide an opportunity for researchers and practitioners around the world to present the most recent advances and future challenges in the fields of biomedical engineering, biomaterials, bioinformatics and computational biology, biomedical imaging and signal processing, biomechanical engineering and biotechnology, amongst others. The papers published in this issue are selected from this conference, which witnesses the advances in biomedical engineering and biotechnology during 2013-2014.

Transgenic strategies to confer resistance against viruses in rice plants

PubMed Central

Sasaya, Takahide; Nakazono-Nagaoka, Eiko; Saika, Hiroaki; Aoki, Hideyuki; Hiraguri, Akihiro; Netsu, Osamu; Uehara-Ichiki, Tamaki; Onuki, Masatoshi; Toki, Seichi; Saito, Koji; Yatou, Osamu

2014-01-01

Rice (Oryza sativa L.) is cultivated in more than 100 countries and supports nearly half of the world’s population. Developing efficient methods to control rice viruses is thus an urgent necessity because viruses cause serious losses in rice yield. Most rice viruses are transmitted by insect vectors, notably planthoppers and leafhoppers. Viruliferous insect vectors can disperse their viruses over relatively long distances, and eradication of the viruses is very difficult once they become widespread. Exploitation of natural genetic sources of resistance is one of the most effective approaches to protect crops from virus infection; however, only a few naturally occurring rice genes confer resistance against rice viruses. Many investigators are using genetic engineering of rice plants as a potential strategy to control viral diseases. Using viral genes to confer pathogen-derived resistance against crops is a well-established procedure, and the expression of various viral gene products has proved to be effective in preventing or reducing infection by various plant viruses since the 1990s. RNA interference (RNAi), also known as RNA silencing, is one of the most efficient methods to confer resistance against plant viruses on their respective crops. In this article, we review the recent progress, mainly conducted by our research group, in transgenic strategies to confer resistance against tenuiviruses and reoviruses in rice plants. Our findings also illustrate that not all RNAi constructs against viral RNAs are equally effective in preventing virus infection and that it is important to identify the viral “Achilles’ heel” gene to target for RNAi attack when engineering plants. PMID:24454308

Frontiers in biomedical engineering and biotechnology.

PubMed

Liu, Feng; Goodarzi, Ali; Wang, Haifeng; Stasiak, Joanna; Sun, Jianbo; Zhou, Yu

2014-01-01

The 2nd International Conference on Biomedical Engineering and Biotechnology (iCBEB 2013), held in Wuhan on 11–13 October 2013, is an annual conference that aims at providing an opportunity for international and national researchers and practitioners to present the most recent advances and future challenges in the fields of Biomedical Information, Biomedical Engineering and Biotechnology. The papers published by this issue are selected from this conference, which witnesses the frontier in the field of Biomedical Engineering and Biotechnology, which particularly has helped improving the level of clinical diagnosis in medical work.

PREFACE: 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013)

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Rizwan Hussain, Raja; Pandiangan, Tumpal; Desai, Amit

2013-06-01

Banner The 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013), was held at the Grand Royal Panghegar Hotel, Bandung, Indonesia, from 9-10 March 2013. The MOIME 2013 conference brought together researchers, engineers and scientists in the field from around the world. MOIME 2013 aimed to promote interaction between the theoretical, experimental, and applied communities, so that a high level exchange was achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that related to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 103 papers and after rigorous review, 45 papers were accepted. The participants came from 16 countries. There were six Plenary and Invited Speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the conference sponsors for the financial support that contributed to the success of MOIME 2013. The Editors of the MOIME 2013 Dr Ford Lumban Gaol Dr Raja Rizwan Hussain Tumpal Pandiangan Dr Amit Desai The PDF contains the abstracts from the plenary and invited articles and the workshop.

2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Webb, Jeff; Ding, Jun

2014-06-01

The 2nd International Conference on Manufacturing, Optimization, Industrial and Material Engineering 2014 (MOIME 2014), was held at the Grand Mercure Harmoni, Opal Room 3rd Floor, Jakarta, Indonesia, during 29-30 March 2014. The MOIME 2014 conference is designed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 97 papers and after rigorous review, 24 papers were accepted. The participants come from 7 countries. There are 4 (four) parallel session and 2 Invited Speakers and one workshop. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2014. The Editors of the MOIME 2014 Proceedings Editors Dr Ford Lumban Gaol Jeff Webb, PhD Professor Jun Ding, PhD

PREFACE: 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015)

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Webb, Jeff; Ding, Jun

2015-05-01

The 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015) was held at the Sheraton Kuta, Bali, Indonesia, from 28 - 29 March 2015. The MOIME 2015 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program, as well as the invited and plenary speakers. This year, we received 99 papers and after rigorous review, 24 papers were accepted. The participants come from eight countries. There were four parallel sessions and two invited speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2015. The Editors of the MOIME 2015 Proceedings Dr. Ford Lumban Gaol Jeff Webb, Ph.D Prof. Jun DING, Ph.D

PREFACE: 13th International Conference on Metrology and Properties of Engineering Surfaces

NASA Astrophysics Data System (ADS)

Leach, Richard

2011-08-01

The 13th International Conference on Metrology and Properties of Engineering Surfaces focused on the progress in surface metrology, surface characterisation instrumentation and properties of engineering surfaces. The conference provided an international forum for academics, industrialists and engineers from different disciplines to meet and exchange their ideas, results and latest research. The conference was held at Twickenham Stadium, situated approximately six miles from Heathrow Airport and approximately three miles from the National Physical Laboratory (NPL). This was the thirteenth in the very successful series of conferences, which have firmly established surface topography as a new and exciting interdisciplinary field of scientific and technological studies. Scientific Themes: Surface, Micro and Nano Metrology Measurement and Instrumentation Metrology for MST Devices Freeform Surface Measurement and Characterisation Uncertainty, Traceability and Calibration AFM/SPM Metrology Tribology and Wear Phenomena Functional Applications Stylus and Optical Instruments

International Conference on Applied Sciences (ICAS2013)

NASA Astrophysics Data System (ADS)

Lemle, Ludovic Dan; Jiang, Yiwen

2014-03-01

The International Conference on Applied Sciences (ICAS2013) took place in Wuhan, P R China from 26-27 October 2013 at the Military Economics Academy. The conference is regularly organized, alternately in Romania and in P R China, by ''Politehnica'' University of Timişoara, Romania, and Military Economics Academy of Wuhan, P R China, with the aim to serve as a platform for the exchange of information between various areas of applied sciences, and to promote the communication between the scientists of different nations, countries and continents. The conference has been organized for the first time in 15-16 June 2012 at the Engineering Faculty of Hunedoara, Romania. The topics of the conference covered a comprehensive spectrum of issues: Economical sciences Engineering sciences Fundamental sciences Medical sciences The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has applicability potential in economics, defense, medicine, etc. The number of registered participants was nearly 90 from 5 countries. During the two days of the conference 4 invited and 36 oral talks were delivered. A few of the speakers deserve a special mention: Mircea Octavian Popoviciu, Academy of Romanian Scientist — Timişoara Branch, Correlations between mechanical properties and cavitation erosion resistance for stainless steels with 12% chromium and variable contents of nickel; Carmen Eleonora Hărău, ''Politehnica'' University of Timişoara, SWOT analysis of Romania's integration in EU; Ding Hui, Military Economics Academy of Wuhan, Design and engineering analysis of material procurement mobile operation platform; Serban Rosu, University of Medicine and Pharmacy ''Victor Babeş'' Timişoara, Cervical and facial infections — a real life threat, among others. Based on the work presented at the conference, 14 selected papers are included in this volume of IOP Conference Series: Materials Science and Engineering. These papers present new researches in the various fields of materials engineering, mechanical engineering, computers engineering, mathematical engineering and clinical engineering. It's our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering to the scientific community to promote further researches in these areas. We sincerely hope that the papers published in this volume will contribute to the advancement of knowledge in the respective fields. All papers published in this volume of IOP Conference Series: Materials Science and Engineering (MSE) have been peer reviewed through processes administered by the editors of the ICAS2013 proceedings, Ludovic Dan Lemle and Yiwen Jiang. Special thanks should be directed to the organizing committee for their tremendous efforts in organizing the conference: General Chair Zhou Laixin, Military Economics Academy of Wuhan Co-chairs Du Qifa, Military Economics Academy of Wuhan Serban Viorel-Aurel, ''Politehnica'' University of Timişoara Fen Youmei, Wuhan University Lin Pinghua, Huazhong University of Science and Technology Members Lin Darong, Military Economics Academy of Wuhan Guo Zhonghou, Military Economics Academy of Wuhan Sun Honghong, Military Economics Academy of Wuhan Liu Dong, Military Economics Academy of Wuhan We thank the authors for their contributions and we would also like to express our gratitude everyone who contributed to this conference, especially for the generous support of the sponsor: micromega S C Micro-Mega HD S A Ludovic Dan Lemle and Yiwen Jiang Coordinators of the Scientific Committee of ICAS2013 Deatails of organizers and members of the scientific commmittee are available in the PDF

Expedition 28 Docking

NASA Image and Video Library

2011-06-10

Vladimir Popovkin, Head of the Russian Federal Space Agency (ROSCOSMOS) answers a reporter’s question during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Friday, June 10, 2011. The Soyuz TMA-02M docked to the International Space Station carrying Expedition 28 Soyuz Commander Sergei Volkov, NASA Flight Engineer Mike Fossum and JAXA (Japanase Aerospace Exploration Agency) Flight Engineer Satoshi Furukawa. Photo Credit: (NASA/Carla Cioffi)

Expedition 28 Docking

NASA Image and Video Library

2011-06-10

William Gerstenmaier, Associate Administrator for Space Operations, is interviewed by Russian Federal Space Agency (ROSCOSMOS) TV following a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Friday, June 10, 2011. The Soyuz TMA-02M docked to the International Space Station carrying Expedition 28 Soyuz Commander Sergei Volkov, NASA Flight Engineer Mike Fossum and JAXA (Japanase Aerospace Exploration Agency) Flight Engineer Satoshi Furukawa. Photo Credit: (NASA/Carla Cioffi)

Synthetic Biology: Engineering, Evolution and Design (SEED) Conference 2015

DTIC Science & Technology

2015-12-01

to promote optimal health. One such recommendation is the consumption of two fish meals per week, preferably fatty fish . This recommendation is prob...Soy oil can provide health benefits of 17 Oral Presentation Abstracts fish consumption , while decreasing dependence on marine sources of omega-3...metabolite feed-back inhibition. For example, the effect of oxygen availability on metabolically engineered E. coli systems was found to be a controlling

15th Railroad Engineering Conference Proceedings, Railroad R&D Challenges of the 80's : Opportunities & Obstacles

DOT National Transportation Integrated Search

1980-06-01

This report constitutes the proceedings of the 15th Railroad Engineering Conference held at TSC on October 21-23, 1979. Conference papers were delivered by various industry and Government officials and centered on three topic areas: The Status of the...

Networks Technology Conference

NASA Technical Reports Server (NTRS)

Tasaki, Keiji K. (Editor)

1993-01-01

The papers included in these proceedings represent the most interesting and current topics being pursued by personnel at GSFC's Networks Division and supporting contractors involved in Space, Ground, and Deep Space Network (DSN) technical work. Although 29 papers are represented in the proceedings, only 12 were presented at the conference because of space and time limitations. The proceedings are organized according to five principal technical areas of interest to the Networks Division: Project Management; Network Operations; Network Control, Scheduling, and Monitoring; Modeling and Simulation; and Telecommunications Engineering.

Proceedings of Industry/Space Division/NASA Conference and Workshops on Mission Assurance Held at Los Angeles, California on 28 April - 2 May 1980.

DTIC Science & Technology

1980-05-02

642 .. . . . OBJECTIVES S PROJECT In April 1978, a Mission Assurance Conference was sponsored jointly by the Air Force Space...equipment or services from a corporation. 4 The corporation in turn probably consists controls manager, and project engineers? of thousands of people and a...once the project effective? Were we motivating them by is assigned, it is run in the military rewarding them in some manner for good department by a

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

Women in Engineering Program Advocates Network (WEPAN): Evaluation of the seventh annual conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brainard, S.G.

1996-08-01

The primary goals of the 1996 WEPAN Conference were to: (1) Conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women in engineering programs; (2) Provide assistance in fundraising and grant writing; (3) Profile women in engineering programs of excellence; (4) Sponsor inspiring, knowledgeable and motivational keynote speakers; and, (5) Offer a series of workshops focused on topics such as: establishing partnerships with industry, current research findings, retention strategies, issues affecting special populations, and early intervention techniques. In an effort to provide greater access for women to engineering careers, women in engineering program directors at Purduemore » University, Stevens Institute of Technology and the University of Washington joined together in 1990 to establish WEPAN, a national network of individuals interested in the recruitment, admission, retention, and graduation of women engineering students. This is the seventh year of operation. Success of this effort has been reflected in numerous ways: increased membership in the organization; increased number of women in engineering programs; increased number of women graduating in engineering; and grants from the U.S. Department of Energy, the National Science Foundation, the Alfred P. Sloan Foundation, the AT&T Foundation, and many other corporations to carry out the goals of WEPAN. The Seventh Annual Women in Engineering Conference entitled, Capitalizing on Today`s Challenges, was held in Denver, Colorado on June 1-4, 1996 at the Hyatt Regency. The conference brought together representatives from academia, government, and industry and examined current issues and initiatives for women in technology, science, and education. Building on the successes of the previous conferences, the seventh conference offered a new variety of speakers and topics.« less

THE DRINKING WATER TREATABILITY DATABASE (Conference Paper)

EPA Science Inventory

The Drinking Water Treatability Database (TDB) assembles referenced data on the control of contaminants in drinking water, housed on an interactive, publicly-available, USEPA web site (www.epa.gov/tdb). The TDB is of use to drinking water utilities, treatment process design engin...

Aircraft Safety and Operating Problems. [conference

NASA Technical Reports Server (NTRS)

1976-01-01

Results of NASA research in the field of aircraft safety and operating problems are discussed. Topics include: (1) terminal area operations, (2) flight dynamics and control; (3) ground operations; (4) atmospheric environment; (5) structures and materials; (6) powerplants; (7) noise; and (8) human factors engineering.

Water and fire safety issues addressed.

PubMed

Arrowsmith, Mike

2014-11-01

One of the four conference streams at last month's Healthcare Estates 2014 event focused on some of the key engineering challenges and opportunities facing healthcare estates managers and healthcare engineers. Mike Arrowsmith, HEJ's technical editor, provides an overview of the engineering sessions at this year's IHEEM conference.

Proceedings of the Undergraduate Mathematics Teaching Conference (Birmingham, England, September 3-6, 2001).

ERIC Educational Resources Information Center

Egerton, Patricia, Ed.

The 27th Undergraduate Mathematics Teaching Conference took place in September of 2001 at the University of Birmingham. Major topics of the conference included preparing a teaching portfolio, engineering mathematics should be taught by engineers, issues in teaching discrete mathematics, action research, study skills, and issues for web-delivered…

PREFACE: 3rd International Conference of Mechanical Engineering Research (ICMER 2015)

NASA Astrophysics Data System (ADS)

Mamat, Riazalman; Rahman, Mustafizur; Mohd. Zuki Nik Mohamed, Nik; Che Ghani, Saiful Anwar; Harun, Wan Sharuzi Wan

2015-12-01

The 3rd ICMER2015 is the continuity of the NCMER2010. The year 2010 represents a significant milestone in the history for Faculty of Mechanical Engineering, Universiti Malaysia Pahang (UMP) Malaysia with the organization of the first and second national level conferences (1st and 2nd NCMER) at UMP on May 26-27 and Dec 3-4 2010. The Faculty then changed the name from National Conference on Mechanical Engineering Research (NCMER) to International Conference on Mechanical Engineering Research (ICMER) in 2011 and this year, 2015 is our 3rd ICMER. These proceedings contain the selected scientific manuscripts submitted to the conference. It is with great pleasure to welcome you to the "International Conference on Mechanical Engineering Research (ICMER2015)" that is held at Zenith Hotel, Kuantan, Malaysia. The call for papers attracted submissions of over two hundred abstracts from twelve different countries including Japan, Iran, China, Kuwait, Indonesia, Norway, Philippines, Morocco, Germany, UAE and more. The scientific papers published in these proceedings have been revised and approved by the technical committee of the 3rd ICMER2015. All of the papers exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, combustion, metallurgy, materials science as well as in manufacturing and biomechanics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors clearly state the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. In this edition of ICMER representatives attending are from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and disseminate research in all fields of mechanical engineering. Topics cover synthesis, applications, and fundamental studies of the topics related to mechanical engineering. In addition, booths for industries to showcase their state-of-the-art products are also provided. The organizing committee of the conference thanks all the participants for their fruitful work and personal contribution to the development of these conference proceedings.

PREFACE: International Scientific and Technical Conference ''Innovative Mechanical Engineering Technologies, Equipment and Materials-2014''

NASA Astrophysics Data System (ADS)

Nail, K.

2015-06-01

In the period from 3 to 5 December 2014 the city of Kazan hosted the International Scientific Conference ''Innovative mechanical engineering technologies, equipment and materials - 2014'' (ISC ''vIMETEM - 2014''). The event was followed by the 14th International specialized exhibition ''Engineering. Metalworking. Kazan'' The main objective of the annual conference was for participants to discuss scientific and technical achievements in the design and manufacture of engineering products, the expansion of cooperation between scientific organizations and enterprises of machine-building complex and the definition of perspective ways of creation and development of new techniques, technologies and materials. The conference ''IMETEM'' was devoted to the 90th anniversary of Fayzrahman Salahovich Yunusov, who made a great contribution in the field of aviation technology. Kashapov Nail, D.Sc., professor (Kazan Federal University)

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

Proceedings of the Conference Arctic '85; Civil Engineering in the Artic offshore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, F.L.; Machemehl, J.L.

1985-01-01

Topics of the 1985 Conference included: Arctic construction, Arctic foundation, Arctic structures, and ocean effects. Arctic terminals and coastal offshore bases, protecting the Arctic environment, and probabilistic methods in Arctic offshore engineering were also discussed. Ice mechanics, marine pipelines in the Arctic, and the role of universities in training civil engineers for Arctic offshore development were highlighted. Sessions on remote sensing, surveying, and mapping were included, and offshore installations in the Bering Sea were discussed. Another topic of discussion was research in Civil Engineering for development of the Arctic offshore. The overall thrust of the conference was the application ofmore » Arctic offshore engineering principles and research in the field of oil and gas exploration and exploitation activity.« less

41 CFR 50-204.50 - Gases, vapors, fumes, dusts, and mists.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Contaminants for 1968” of the American Conference of Governmental Industrial Hygienists, except for the ANSI... this section, feasible administrative or engineering controls must first be determined and implemented... competent industrial hygienist or other technically qualified source. Table II—Mineral Dusts Substance Mppcf...

41 CFR 50-204.50 - Gases, vapors, fumes, dusts, and mists.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Contaminants for 1968” of the American Conference of Governmental Industrial Hygienists, except for the ANSI... this section, feasible administrative or engineering controls must first be determined and implemented... competent industrial hygienist or other technically qualified source. Table II—Mineral Dusts Substance Mppcf...

41 CFR 50-204.50 - Gases, vapors, fumes, dusts, and mists.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Contaminants for 1968” of the American Conference of Governmental Industrial Hygienists, except for the ANSI... this section, feasible administrative or engineering controls must first be determined and implemented... competent industrial hygienist or other technically qualified source. Table II—Mineral Dusts Substance Mppcf...

41 CFR 50-204.50 - Gases, vapors, fumes, dusts, and mists.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Contaminants for 1968” of the American Conference of Governmental Industrial Hygienists, except for the ANSI... this section, feasible administrative or engineering controls must first be determined and implemented... competent industrial hygienist or other technically qualified source. Table II—Mineral Dusts Substance Mppcf...

41 CFR 50-204.50 - Gases, vapors, fumes, dusts, and mists.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Contaminants for 1968” of the American Conference of Governmental Industrial Hygienists, except for the ANSI... this section, feasible administrative or engineering controls must first be determined and implemented... competent industrial hygienist or other technically qualified source. Table II—Mineral Dusts Substance Mppcf...

PREFACE: 6th EEIGM International Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Horwat, David; Ayadi, Zoubir; Jamart, Brigitte

2012-02-01

The 6th EEIGM Conference on Advanced Materials Research (AMR 2011) was held at the European School of Materials Engineering (EEIGM) on the 7-8 November 2011 in Nancy, France. This biennial conference organized by the EEIGM is a wonderful opportunity for all scientists involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE), to present their research in the various fields of Materials Science and Engineering. This conference is also open to other universities who have strong links with the EEIGM and provides a forum for the exchange of ideas, co-operation and future orientations by means of regular presentations, posters and a round-table discussion. This edition of the conference included a round-table discussion on composite materials within the Interreg IVA project '+Composite'. Following the publication of the proceedings of AMR 2009 in Volume 5 of this journal, it is with great pleasure that we present this selection of articles to the readers of IOP Conference Series: Materials Science and Engineering. Once again it represents the interdisciplinary nature of Materials Science and Engineering, covering basic and applicative research on organic and composite materials, metallic materials and ceramics, and characterization methods. The editors are indebted to all the reviewers for reviewing the papers at very short notice. Special thanks are offered to the sponsors of the conference including EEIGM-Université de Lorraine, AMASE, DocMASE, Grand Nancy, Ville de Nancy, Region Lorraine, Fédération Jacques Villermaux, Conseil Général de Meurthe et Moselle, Casden and '+Composite'. Zoubir Ayadi, David Horwat and Brigitte Jamart

Manufacturing Methods and Technology (MANTECH) Program. Quality Control and Nondestructive Evaluation Techniques for Composites. Part VI. Acoustic Emission - A State-of-the-Art Review.

DTIC Science & Technology

1983-05-01

SALPE Technical Conference Series, Volume 4. Society for the Advancement of Material and Process Engineering, Azusa, California. 1972. conference held...dispersion of the stress waves, and scattering from "obstacles" encountered in the line of travel of the wave. Geometric spreading is the loss in signal...amplitude due to the fact that, as the wave travels away from the point AE source in a two- I or three-dimensional medium, the total area of material

Cumulative reports and publications through December 31, 1991

NASA Technical Reports Server (NTRS)

1992-01-01

A reports and publications list is given from the Institute for Computer Applications in Science and Engineering (ICASE) through December 31, 1991. The major categories of the current ICASE research program are; numerical methods, control and parameter identification problems, computational problems in engineering and the physical sciences, and computer systems and software. Since ICASE reports are intended to be preprints of articles that will appear in journals or conference proceedings, the published reference is included when available.

3rd International Conference on Energy Equipment Science and Engineering (ICEESE 2017)

NASA Astrophysics Data System (ADS)

2018-03-01

PREFACE On behalf of the organizing committee of the 2017 3rd International Conference on Energy Equipment Science and Engineering (ICEESE 2017), I would like to express a warm “Thank You” to all the participants, for their important contribution they brought to the Conference! I strongly appreciate the contribution of the authors, who submitted valuable papers and agreed to do successive revisions of their papers, following the recommendations received from the reviewers. ICEESE 2017 was held in Beijing, China during December28-31, 2017, which was organized by Wuhan University and Guizhou Minzu University. The conference provides a useful and wide platform both for display the latest research and for exchange of research results and thoughts in Energy Equipment Science and Engineering. The participants of the conference were from almost every part of the world, with background of either academia or industry, even well-known enterprise. The success and prosperity of the conference is reflected high level of the papers received. List of Committees available in this pdf.

Annual Conference Abstracts

ERIC Educational Resources Information Center

Engineering Education, 1976

1976-01-01

Presents the abstracts of 158 papers presented at the American Society for Engineering Education's annual conference at Knoxville, Tennessee, June 14-17, 1976. Included are engineering topics covering education, aerospace, agriculture, biomedicine, chemistry, computers, electricity, acoustics, environment, mechanics, and women. (SL)

Erosion Control of Scour during Construction. Report 8. Summary Report.

DTIC Science & Technology

1985-01-01

the breakwaters. Experiments were conducted by Hotta and Marui (1976) to investigate characteristics of the local scour; and it was found that local... Marui , N. 1976. "Local Scour and Current Around a Porous Breakwater," Proceedings, Fifteenth Conference on Coastal Engineering, Honolulu, Hawaii, Vol II

Proceedings of the NASA/Florida Institute of Technology Environmental Engineering Conference on Nitrogen Tetroxide. [with emphasis on space shuttle

NASA Technical Reports Server (NTRS)

Rhodes, E. L.

1978-01-01

Methods of reducing the user hazards of nitrogen tetroxide, a hypergolic oxidizer are discussed. Kennedy Space Center developments in N2O4 control for the space shuttle are featured. Other areas covered are life support equipment and transportation.

Sugar beet cell wall protein confers fungal and pest resistance in genetically engineered plants

USDA-ARS?s Scientific Manuscript database

Sugar beet biomass and sugar yield are reduced by diseases caused by microbial pathogens and insect pest infestations. Since disease and pest control measures continue to rely on harmful chemical fungicides and insecticides, biotechnological approaches offer an alternate approach for disease and pe...

PREFACE: 7th International Conference on Applied Electrostatics (ICAES-2012)

NASA Astrophysics Data System (ADS)

Li, Jie

2013-03-01

ICAES is an important conference organized every four years by the Committee on Electrostatics of the Chinese Physical Society, which serves as a forum for scientists, educators and engineers interested in the fundamentals, applications, disasters and safety of electrostatics, etc. In recent years, new techniques, applications and fundamental theories on electrostatics have developed considerably. ICAES-7, held in Dalian, China, from 17-19 September 2012, aimed to provide a forum for all scholars to report the newest developments in electrostatics, to probe the questions that scholars faced and to discuss fresh ideas related to electrostatics. ICAES-7 was co-organized and hosted by Dalian University of Technology, and was sponsored by the Ministry of Education of China, the National Natural Science Foundation of China, Dalian University of Technology, Nanjing Suman Electronics Co. Ltd (Suman, China), Shekonic (Yangzhou Shuanghong, China) Electric/Mechanical Co. Ltd, and Suzhou TA&A Ultra Clean Technology Co. Ltd. (China). On behalf of the organizing committee of ICAES-7, I express my great appreciation for their support of the conference. Over 160 scholars and engineers from many countries including Croatia, The Czech Republic, D.P.R. Korea, Germany, Japan, Malaysia, Poland, Russia, the United States of America, China attended ICAES-7, and the conference collected and selected 149 papers for publication. The subjects of those papers cover the fundamentals of electrostatics, electrostatic disaster and safety, and electrostatic application (e.g. precipitation, pollutant control, biological treatment, mixture separation and food processing, etc). I cordially thank all authors and attendees for their support, and my appreciation is also given to the conference honorary chair, the organizing committee and advisory committee, and the conference secretaries for their hard work. ICAES-7 is dedicated to the memory of Professor Jen-Shih Chang (professor emeritus in the Faculty of Engineering, McMaster University, Canada), Haitian Scholar of Dalian University of Technology (China), who passed away on 27 February 2011. Professor Chang was active in research fields including the applications of electrostatics, electromagnetic hydrodynamics, plasma environmental pollution control technologies, etc and he contributed much to the development of these fields. Professor Chang was the visiting professor at some Key Universities in China and was the friend of Chinese scholars engaged in electrostatics. Professor Chang was also active in joining and supporting the previous ICAES. We will cherish the memory of Professor Jen-Shih Chang forever. Professor Jie Li Proceedings Editor Dalian, September 2012 Conference photograph

A Report of the Nuclear Engineering Division Sessions at the 1971 ASEE Annual Conference

ERIC Educational Resources Information Center

Eckley, Wayne; Nelson, George W.

1972-01-01

Summarizes the discussions at the conference under the topics, Objective Criteria for the Future" and Teaching Concepts Basic to Nuclear Engineering." Includes comments from personnel representing universities, industries, and government laboratories. (TS)

PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

NASA Astrophysics Data System (ADS)

Ručevskis, Sandris

2015-11-01

The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana Bajare, Laura Sele, Liga Radina and Jana Galilejeva for their major contribution to organizing the conference and to the literary editor Tatjana Smirnova and technical editor Daira Erdmane for their hard work on the conference proceedings.

PREFACE: Nanoscale Devices and System Integration Conference (NDSI-2004)

NASA Astrophysics Data System (ADS)

Khizroev, Sakhrat; Litvinov, Dmitri

2004-10-01

The inaugural conference on Nanoscale Devices and System Integration (NDSI-2004) was held in Miami, Florida, 15-19 February, 2004. The focus of the conference was `real-life' devices and systems that have recently emerged as a result of various nanotechnology initiatives in chemistry and chemical engineering, physics, electrical engineering, materials science and engineering, biomedical engineering, computer science, robotics, and environmental science. The conference had a single session all-invited speaker format, with the presenters making the `Who's Who in Nanotechnology' list. Contributed work was showcased at a special poster session. The conference, sponsored by the Institute of Electrical and Electronics Engineers (IEEE) and the US Air Force, and endorsed by Materials Research Society (MRS), drew more than 160 participants from fourteen countries. To strengthen the connection between fundamental research and `real-life' applications, the conference featured a large number of presenters from both academia and industry. Among the participating companies were NEC, IBM, Toshiba, AMD, Samsung, Seagate, and Veeco. Nanotechnology has triggered a new wave of research collaborations between researchers from academia and industry with a broad range of specializations. Such a global approach has resulted in a number of breakthrough accomplishments. One of the main goals of this conference was to identify these accomplishments and put the novel technology initiatives and the emerging research teams on the map. Among the key nanotechnology applications demonstrated at NDSI-2004 were carbon-nanotube-based transistors, quantum computing systems, nanophotonic devices, single-molecule electronic devices and biological magnetic sources. Due to the unprecedented success of the conference, the organizing committee of NDSI has unanimously chosen to turn NDSI into an annual international nanotechnology event. The next NDSI is scheduled for 4-6 April, 2005, in Houston, Texas. Details can be found on the conference web site at http://www.nanointernational.org. This special issue of Nanotechnology features selected papers from NDSI-2004.

Metabolic Engineering VII Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Korpics

The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniquesmore » important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.« less

Project SQUID. Conference on Wave Engines and Pulse Jets, held at Princeton, New Jersey on November 9-10, 1954

DTIC Science & Technology

1954-11-01

small Pelton air turbine in Fig. U supplies this power and provides a speed control for the rotor. The engine consists of a rotor which runs betwen...inherent in existing gas turbine power plants are circumvented by using intermittent flow in which the components are either alternately exposed to...investigators, wave processes while imperfectly understood, seemed very attractiveo The first successful heat machine which used waves was the gas turbine

Technology 2000, volume 1

NASA Technical Reports Server (NTRS)

1991-01-01

The purpose of the conference was to increase awareness of existing NASA developed technologies that are available for immediate use in the development of new products and processes, and to lay the groundwork for the effective utilization of emerging technologies. There were sessions on the following: Computer technology and software engineering; Human factors engineering and life sciences; Information and data management; Material sciences; Manufacturing and fabrication technology; Power, energy, and control systems; Robotics; Sensors and measurement technology; Artificial intelligence; Environmental technology; Optics and communications; and Superconductivity.

Expanding girls' horizons in physics and other sciences: A successful strategy since 1976

NASA Astrophysics Data System (ADS)

Spencer, Cherrill M.

2015-12-01

To start on the path to a career in science, technology, engineering, or mathematics (STEM), girls must take appropriate prerequisite-to-college mathematics and science courses when they are 15 to 18 years old. The Expanding Your Horizons in Science, Engineering, and Mathematics (EYH) conferences are one-day conferences for girls aged 12 to 18, designed to encourage girls towards a STEM career. These conferences engage schoolgirls in enjoyable hands-on STEM activities, created and led by women STEM professionals. This paper describes the history of EYH conferences, what happens at one, the impact of an EYH conference on the girls, and how to start one.

NIH-IEEE 2015 Strategic Conference on Healthcare Innovations and Point-of-Care Technologies for Prec

Cancer.gov

NIH and the Institute for Electrical and Electronics Engineering, Engineering in Medicine and Biology Society (IEEE/EMBS) hosted the third iteration of the Healthcare Innovations and Point-of-Care Technologies Conference last week.

EDITORIAL: Precision Measurement Technology at the 56th International Scientific Colloquium in Ilmenau Precision Measurement Technology at the 56th International Scientific Colloquium in Ilmenau

NASA Astrophysics Data System (ADS)

Manske, E.; Froehlich, T.

2012-07-01

The 56th International Scientific Colloquium was held from 12th to 16th September 2011 at the Ilmenau University of Technology in Germany. This event was organized by the Faculty of Mechanical Engineering under the title: 'Innovation in Mechanical Engineering—Shaping the Future' and was intended to reflect the entire scope of modern mechanical engineering. In three main topics many research areas, all involving innovative mechanical engineering, were addressed, especially in the fields of Precision Engineering and Precision Measurement Technology, Mechatronics and Ambient-Assisted Living and Systems Technology. The participants were scientists from 21 countries, and 166 presentations were given. This special issue of Measurement Science and Technology presents selected contributions on 'Precision Engineering and Precision Measurement Technology'. Over three days the conference participants discussed novel scientific results in two sessions. The main topics of these sessions were: Measurement and Sensor Technology Process measurement Laser measurement Force measurement Weighing technology Temperature measurement Measurement dynamics and Nanopositioning and Nanomeasuring Technology Nanopositioning and nanomeasuring machines Nanometrology Probes and tools Mechanical design Signal processing Control and visualization in NPM devices Significant research results from the Collaborative Research Centre SFB 622 'Nanopositioning and Nanomeasuring Machines' funded by the German Research Foundation (DFG) were presented as part of this topic. As the Chairmen, our special thanks are due to the International Programme Committee, the Organization Committee and the conference speakers as well as colleagues from the Institute of Process Measurement and Sensor Technology who helped make the conference a success. We would like to thank all the authors for their contributions, the referees for their time spent reviewing the contributions and their valuable comments, and the whole Editorial Board of Measurement Science and Technology for their support.

The Shock and Vibration Digest, Volume 4, Number 5, May 1972.

DTIC Science & Technology

1972-05-01

capability to solve real-time on aircraft noise, its generation instrumentation problems found effects and control will be sur- In manufacturing plants...annoyance. Noise measurements indicate that the same manufacturing plantisto machine the the respondents, in general, properly identify modified... Manufacturing 1W San Diego, Calif. A. J. Favrata, SAE iiq. Meeting, SAE Internaional Conference on Noise Control Engineering, INCE 4-6 Wanington, D. C. Mi. .f

2018 Ground Robotics Capabilities Conference and Exhibiton

DTIC Science & Technology

2018-04-11

Transportable Robot System (MTRS) Inc 1 Non -standard Equipment (approved) Explosive Ordnance Disposal Common Robotic System-Heavy (CRS-H) Inc 1 AROC: 3-Star...and engineering • AI risk mitigation methodologies and techniques are at best immature – E.g., V&V; Probabilistic software analytics; code level...controller to minimize potential UxS mishaps and unauthorized Command and Control (C2). • PSP-10 – Ensure that software systems which exhibit non

6th international conference on case histories in geotechnical engineering August 2008conference report.

DOT National Transportation Integrated Search

2009-01-01

Due to uncertainty in the nature of soils, a systematic study of the performance of geotechnical structures and its match with predictions is extremely important. Therefore, considerable research effort is being devoted to geotechnical engineering th...

Erosion Control of Scour during Construction; Report 2. Literature Survey of Theoretical, Experimental, and Prototype Investigations.

DTIC Science & Technology

1980-08-01

induced currents around the breakwaters. Experiments were conducted by Hotta and Marui (1976) to investigate characteristics of the local scour; and it...on Oscillatory Boundary Layer Flow," Proceedings, Eleventh Conference on Coastal Engineering, London, England, Vol I, pp 467-486. Hotta, S., and Marui

Broadening of the I2P1/2 P3/2 Transition Lineshape by Unsteady Vortex Motion (Postprint)

DTIC Science & Technology

2008-06-24

vortex core identification functions of Sujudi and Haimes14 implemented in the Tecplot visualization software from Amtec Engineering. The red vortex core...sensors for COIL devices,” Proceedings of SPIE Conference on Gas, Chemical, and Electrical Lasers and Intense Beam Control and Applications, 3931, pp

Third International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES-3)

NASA Technical Reports Server (NTRS)

Dulikravich, George S. (Editor)

1991-01-01

Papers from the Third International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDES) are presented. The papers discuss current research in the general field of inverse, semi-inverse, and direct design and optimization in engineering sciences. The rapid growth of this relatively new field is due to the availability of faster and larger computing machines.

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

Expedition 23 Flight Engineer Mikhail Kornienko answers a reporters' question during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan on Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Mikhail Kornienko, Soyuz Commander Alexander Skvortsov and Flight Engineer Tracy Caldwell Dyson is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

Women in Engineering--Beyond Recruitment. Proceedings of the Conference (Cornell University, Ithaca, New York, June 22-25, 1975).

ERIC Educational Resources Information Center

Ott, Mary Diederich, Ed.; Reese, Nancy A., Ed.

This report contains invited papers and comments from a conference on the status and problems of women in engineering. First, a discussion of research reveals that most women choose engineering as a field for college study late in their secondary education, depend heavily on external sources of support, and have attitudes and experiences different…

PREFACE: International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014)

NASA Astrophysics Data System (ADS)

Kopanitsa, Natalia O.

2015-01-01

In October 15-17, 2014 International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014) took place at Tomsk State University of Architecture and Building (Tomsk, Russia). The Conference became a discussion platform for researchers in the fields of studying structure and properties of advanced building materials and included open lectures of leading scientists and oral presentations of master, postgraduate and doctoral students. A special session was devoted to reports of school children who further plan on starting a research career. The Conference included an industrial exhibition where companies displayed the products and services they supply. The companies also gave presentations of their products within the Conference sessions.

75 FR 12740 - Wyoming Interstate Company, Inc.; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... additional technical, engineering, and operational support for its proposed gas quality allocation procedures... should be prepared to support its position with adequate technical, engineering, and operational information. FERC conferences are accessible under section 508 of the Rehabilitation Act of 1973. For...

Nuclear Rocket Technology Conference

NASA Technical Reports Server (NTRS)

1966-01-01

The Lewis Research Center has a strong interest in nuclear rocket propulsion and provides active support of the graphite reactor program in such nonnuclear areas as cryogenics, two-phase flow, propellant heating, fluid systems, heat transfer, nozzle cooling, nozzle design, pumps, turbines, and startup and control problems. A parallel effort has also been expended to evaluate the engineering feasibility of a nuclear rocket reactor using tungsten-matrix fuel elements and water as the moderator. Both of these efforts have resulted in significant contributions to nuclear rocket technology. Many successful static firings of nuclear rockets have been made with graphite-core reactors. Sufficient information has also been accumulated to permit a reasonable Judgment as to the feasibility of the tungsten water-moderated reactor concept. We therefore consider that this technoIogy conference on the nuclear rocket work that has been sponsored by the Lewis Research Center is timely. The conference has been prepared by NASA personnel, but the information presented includes substantial contributions from both NASA and AEC contractors. The conference excludes from consideration the many possible mission requirements for nuclear rockets. Also excluded is the direct comparison of nuclear rocket types with each other or with other modes of propulsion. The graphite reactor support work presented on the first day of the conference was partly inspired through a close cooperative effort between the Cleveland extension of the Space Nuclear Propulsion Office (headed by Robert W. Schroeder) and the Lewis Research Center. Much of this effort was supervised by Mr. John C. Sanders, chairman for the first day of the conference, and by Mr. Hugh M. Henneberry. The tungsten water-moderated reactor concept was initiated at Lewis by Mr. Frank E. Rom and his coworkers. The supervision of the recent engineering studies has been shared by Mr. Samuel J. Kaufman, chairman for the second day of the conference, and Mr. Roy V. Humble. Dr. John C. Eward served as general chairman for the conference.

PREFACE: 7th EEIGM International Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Joffe, Roberts

2013-12-01

The 7th EEIGM Conference on Advanced Materials Research (AMR 2013) was held at Luleå University of Technology on the 21-22 March 2013 in Luleå, SWEDEN. This conference is intended as a meeting place for researchers involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE). This is great opportunity to present their on-going research in the various fields of Materials Science and Engineering, exchange ideas, strengthen co-operation as well as establish new contacts. More than 60 participants representing six countries attended the meeting, in total 26 oral talks and 19 posters were presented during two days. This issue of IOP Conference Series: Materials Science and Engineering presents a selection of articles from EEIGM-7 conference. Following tradition from previous EEIGM conferences, it represents the interdisciplinary nature of Materials Science and Engineering. The papers presented in this issue deal not only with basic research but also with applied problems of materials science. The presented topics include theoretical and experimental investigations on polymer composite materials (synthetic and bio-based), metallic materials and ceramics, as well as nano-materials of different kind. Special thanks should be directed to the senior staff of Division of Materials Science at LTU who agreed to review submitted papers and thus ensured high scientific level of content of this collection of papers. The following colleagues participated in the review process: Professor Lennart Walström, Professor Roberts Joffe, Professor Janis Varna, Associate Professor Marta-Lena Antti, Dr Esa Vuorinen, Professor Aji Mathew, Professor Alexander Soldatov, Dr Andrejs Purpurs, Dr Yvonne Aitomäki, Dr Robert Pederson. Roberts Joffe October 2013, Luleå Conference photograph EEIGM7 conference participants, 22 March 2013 The PDF contains the book of abstracts.

Innovative Approach to Validation of Ultraviolet (UV) Reactors for Disinfection in Drinking Water Systems

EPA Science Inventory

Slide presentation at Conference: ASCE 7th Civil Engineering Conference in the Asian Region. USEPA in partnership with the Cadmus Group, Carollo Engineers, and other State & Industry collaborators, are evaluating new approaches for validating UV reactors to meet groundwater & sur...

NASA/Howard University Large Space Structures Institute

NASA Technical Reports Server (NTRS)

Broome, T. H., Jr.

1984-01-01

Basic research on the engineering behavior of large space structures is presented. Methods of structural analysis, control, and optimization of large flexible systems are examined. Topics of investigation include the Load Correction Method (LCM) modeling technique, stabilization of flexible bodies by feedback control, mathematical refinement of analysis equations, optimization of the design of structural components, deployment dynamics, and the use of microprocessors in attitude and shape control of large space structures. Information on key personnel, budgeting, support plans and conferences is included.

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

Expedition 23 Flight Engineer Tracy Caldwell Dyson answers a reporters' question during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan on Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Tracy Caldwell Dyson, Soyuz Commander Alexander Skvortsov and Flight Engineer Mikhail Kornienko is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

10th International Conference of Computational Methods in Sciences and Engineering

DTIC Science & Technology

2014-12-22

Density Modulation ", in the 10th International Conference of Computational Methods in Sciences and Engineering (ICCMSE 2014), April 4-7, 2014, Athens...ENGINEERING We organized the symposium, “Electronic Transport Properties in the Presence of Density Modulation ,” in the 10th International...Superlattices by Coplanar Waveguide Dr. Endo reported his recent experimental work on thermoelectric power of two-dimensional electron gases in the quantum

11th Annual Systems Engineering Conference

DTIC Science & Technology

2008-10-23

effectiveness for force structure architecture studies – Problem of interest was Layered Intelligence, Surveillance and Reconnaissance ( LISR ) with Integrated...Cleared for Public Release, Control No. 08-110, dtd. 10-1-0811 LISR CET Typical Products 1 Satellite_A; 1 Satellite_B; 3 VehA; 1 VehB (50%) 2 VehA; 3...the means to support LISR force structure architecture studies: Stand-alone and as a lead-in to detailed work Cleared for Public Release, Control No

Expedition 21 Prelaunch Press Conference

NASA Image and Video Library

2009-09-28

Spaceflight Participant Guy Laliberté, left, Expedition 21 Flight Engineer Maxim Suraev, center, and Expedition 21 Flight Engineer Jeffrey N. Williams wave hello and point to members of their families at the start of the press conference, Tuesday, Sept. 29, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

The 50th Anniversary of the First International Conference on Permafrost

NASA Astrophysics Data System (ADS)

Brown, J.

2013-12-01

This year marks the 50th anniversary of the First International Conference on Permafrost (ICOP) that was held at Purdue University on 11-15 November 1963. The conference was a historic event in that it brought together for the first time the leading researchers and practitioners from North America and other countries that had diverse interests and activities in the study and applications of perennially frozen ground, cold regions engineering and related laboratory investigations. The 285 registered participants represented engineers, researchers, manufacturers and builders from the USA (231), Canada (42), the USSR (5), Sweden (3) and Argentina, Austria, Great Britain, Japan, Norway, Poland, Switzerland, and West Germany. The conference was organized by the Building Research Advisory Board of the U.S. National Academy of Sciences-National Research Council (NAS-NRC). The carefully edited volume, published in 1966 by the NAS, is considered to be the first multi-national, English-language collection of papers devoted entirely to permafrost topics. The 100 published papers followed closely the actual conference venue and panel discussions: soils and vegetation (9), massive ground ice (10), geomorphology (16), phase equilibrium and transition (8), thermal aspects (8), physico-mechanical properties (7), exploration and site selection (11), sanitary and hydraulic engineering (14), and earthwork and foundations (17). This 1963 Purdue conference essentially broke the 'ice' between East and West permafrost researchers and set the stage for the Second ICOP that was held in 1973 in Yakutsk, Siberia, and represented the first large international conference held in the restricted area of Siberia. All subsequent conferences maintained the interdisciplinary principles set forth at Purdue: two more in the United States (Fairbanks 1983, 2008), two in Canada (Edmonton 1978, Yellowknife 1998), and one in Trondheim, Norway (1988), Beijing, China (1993), and Zurich, Switzerland (2003), one more in Russia (Salekhard 2012). Throughout the 50-year history of the International Conferences on Permafrost, publication of Proceedings has been the major legacy of each conference. Over the course of the 50 years more than 2000 papers in English were published in the ICOP Proceedings with the assistance of many hundreds of international reviewers. Starting in 2003 (8th ICOP), a second form of publication was initiated that involved Extended Abstracts. Following the formation of the International Permafrost Association (IPA) at the 1983 ICOP, subsequent conferences were under the auspices of the IPA. Starting with the 2008 conference, the Permafrost Young Researchers Network (PYRN) participated in conference activities. The IPA remains the lead organization that represents collectively both the international permafrost science and engineering communities. This first Conference, 50 years ago, provided the foundation for the development of an international community of scientists and engineers committed to the advancement of permafrost research and related cold regions design and performance.

IEEE Nuclear and Space Radiation Effects Conference: Notes on the Early Conferences

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.; Galloway, Kenneth F.

2013-01-01

This paper gathers the remembrances of several key contributors who participated in the earliest Institute of Electrical and Electronics Engineers (IEEE) Nuclear and Space Radiation Effects Conferences (NSREC).

PREFACE: VI International Scientific Practical Conference on Innovative Technologies and Economics in Engineering

NASA Astrophysics Data System (ADS)

Chinakhov, Dmitry A.

2015-09-01

In these conference proceedings we present papers from the 6th International Scientific Practical Conference on Innovation Technology and Economics in Engineering held at the Yurga Institute of Technology branch of the National Research Tomsk Polytechnic University from 21st - 23rd May 2015. The proceedings contain the selected scientific reports submitted to the conference. Having started in 1996, the scientific conference at the Yurga Institute of Technology branch of the National Research Tomsk Polytechnic University acquired international status in 2010. This year, scholars from Russia, Kazakhstan, Belarus, Ukraine, Azerbaijan, China, Germany and Poland have submitted their papers to the conference. The scientific reports published in these proceedings have been revised and approved by the editorial team of the conference. All of the reports exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, welding, metallurgy, materials science as well as in computer-aided manufacturing and economics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors state clearly the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. The organizing committee of the conference thanks all the participants for their fruitful work and personal contribution to the development of these conference proceedings.

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Russian Orthodox Priest, Vladyka Feofan speaks during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

Proceedings of the 2013 MidSouth Computational Biology and Bioinformatics Society (MCBIOS) Conference.

PubMed

Wren, Jonathan D; Dozmorov, Mikhail G; Burian, Dennis; Kaundal, Rakesh; Perkins, Andy; Perkins, Ed; Kupfer, Doris M; Springer, Gordon K

2013-01-01

The tenth annual conference of the MidSouth Computational Biology and Bioinformatics Society (MCBIOS 2013), "The 10th Anniversary in a Decade of Change: Discovery in a Sea of Data", took place at the Stoney Creek Inn & Conference Center in Columbia, Missouri on April 5-6, 2013. This year's Conference Chairs were Gordon Springer and Chi-Ren Shyu from the University of Missouri and Edward Perkins from the US Army Corps of Engineers Engineering Research and Development Center, who is also the current MCBIOS President (2012-3). There were 151 registrants and a total of 111 abstracts (51 oral presentations and 60 poster session abstracts).

The international emergency management and engineering conference 1995: Proceedings. Globalization of emergency management and engineering: National and international issues concerning research and applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, J.D.; Wybo, J.L.; Buisson, L.

1995-12-31

This conference was held May 9--12, 1995 in Nice, France. The purpose of this conference was to provide a forum for exchange of state-of-the-art information to cope more effectively with emergencies. Attention is focused on advance technology from both a managerial and a scientific viewpoint. Interests include computers and communication systems as well as the social science and management aspects involved in emergency management and engineering. The major sections are: Management and Social Sciences; Training; Natural Disasters; Nuclear Hazards; Chemical Hazards; Research; and Applications. Individual papers have been processed separately for inclusion in the appropriate data bases.

PCaPAC 2006 Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavel Chevtsov; Matthew Bickley

2007-03-30

The 6-th international PCaPAC (Personal Computers and Particle Accelerator Controls) workshop was held at Jefferson Lab, Newport News, Virginia, from October 24-27, 2006. The main objectives of the conference were to discuss the most important issues of the use of PCs and modern IT technologies for controls of accelerators and to give scientists, engineers, and technicians a forum to exchange the ideas on control problems and their solutions. The workshop consisted of plenary sessions and poster sessions. No parallel sessions were held.Totally, more than seventy oral and poster presentations as well as tutorials were made during the conference, on themore » basis of which about fifty papers were submitted by the authors and included in this publication. This printed version of the PCaPAC 2006 Proceedings is published at Jefferson Lab according to the decision of the PCaPAC International Program Committee of October 26, 2006.« less

20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014)

NASA Astrophysics Data System (ADS)

2014-10-01

The active involvement of young researchers in scientific processes and the acquisition of scientific experience by gifted youth currently have a great value for the development of science. One of the research activities of National Research Tomsk Polytechnic University, aimed at the preparing and formation of the next generation of scientists, is the International Conference of Students and Young Scientists ''Modern Techniques and Technologies'', which was held in 2014 for the twentieth time. Great experience in the organization of scientific events has been acquired through years of carrying the conference. There are all the necessary resources for this: a team of organizers - employees of Tomsk Polytechnic University, premises provided with modern office equipment and equipment for demonstration, and leading scientists - professors of TPU, as well as the status of the university as a leading research university in Russia. This way the conference is able to attract world leading scientists for the collaboration. For the previous years the conference proved itself as a major scientific event at international level, which attracts more than 600 students and young scientists from Russia, CIS and other countries. The conference provides oral plenary and section reports. The conference is organized around lectures, where leading Russian and foreign scientists deliver plenary presentations to young audiences. An important indicator of this scientific event is the magnitude of the coverage of scientific fields: energy, heat and power, instrument making, engineering, systems and devices for medical purposes, electromechanics, material science, computer science and control in technical systems, nanotechnologies and nanomaterials, physical methods in science and technology, control and quality management, design and technology of artistic materials processing. The main issues considered by young researchers at the conference were related to the analysis of contemporary problems using new techniques and application of new technologies.

Improving the Latin American Engineering Student's Experience in the U.S. University.

ERIC Educational Resources Information Center

Rogers, Kenneth A.

This report resulted from a conference convened to discuss the special needs of Latin American students in the US and the relationship between academic courses offered and educational needs and career opportunities at home. The conference focused on business administration and engineering, fields attracting the largest number of Latin American…

Technical Papers Presented at the 1971 NAB Engineering Conference. First Edition.

ERIC Educational Resources Information Center

1971

This collection of 25 papers and panels presented at the 1971 Engineering Conference of the National Association of Broadcasters surveys recent technical developments in the field. At least four of these papers are relevant to education. "Everything You Wanted to Know About Cartridge Machines--But Were Afraid to Ask" describes improvements in…

Conference Proceedings of the Productivity Program Implementation Conference Held in Jacksonville, Florida on 20-22 May 1981.

DTIC Science & Technology

1981-05-01

first Quality Circle was registered with the Japanese Union of Scientists and Engineers (JUSE) in 1962. The concept was conceived by Dr. Kaoru ... Ishikawa , a professor of engineering at Tokyo University, and developed under the sponsorship of . JUSE. Quality Circles fuse the quality sciences

Super and parallel computers and their impact on civil engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamat, M.P.

1986-01-01

This book presents the papers given at a conference on the use of supercomputers in civil engineering. Topics considered at the conference included solving nonlinear equations on a hypercube, a custom architectured parallel processing system, distributed data processing, algorithms, computer architecture, parallel processing, vector processing, computerized simulation, and cost benefit analysis.

Chemical Sciences and Engineering - US China Electric Vehicle and Battery

Science.gov Websites

Technology Workshop Argonne National Laboratory Chemical Sciences & Engineering DOE Logo Photo Gallery Hotels Maps Bus Schedule Contact Us TCS Building and Conference Center, Argonne National Lab TCS Building and Conference Center United States Flag China flag 2011 U.S.-China Electric Vehicle

PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

NASA Astrophysics Data System (ADS)

Shuja Syed, Ahmed

2013-12-01

The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want to thank the Organizing Committee, the Institutions and Sponsors supporting the Conference, especially 'Centre for Emerging Sciences, Engineering & Technology (CESET), Islamabad', the IOP Publishers and everyone who contributed to the organization of this meeting, for their invaluable efforts to make this event a great success. Professor Dr Ahmed Shuja Syed Chief Editor The PDF also contains lists of the boards, committees and sponsors.

EDITORIAL: Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010) Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010)

NASA Astrophysics Data System (ADS)

Brei, Diann

2011-09-01

The third annual meeting of the AMSE/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) took place in the heart of historic Philadelphia's cultural district, and included a pioneer banquet in the National Constitutional Center. The applications emphasis of the 2010 conference was reflected in keynote talks by Dr Alan Taub, vice president of General Motors global research and development, 'Smart materials in the automotive industry'; Dr Charles R Farrar, engineering institute leader at Los Alamos National Laboratory, 'Future directions for structural health monitoring of civil engineering infrastructure'; and Professor Christopher S Lynch of the University of California Los Angeles, 'Ferroelectric materials and their applications'. The SMASIS conference was divided into six technical symposia each of which included basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. The six symposia were: SYMP 1 Multifunctional Materials; SYMP 2 Active Materials, Mechanics and Behavior; SYMP 3 Modeling, Simulation and Control; SYMP 4 Enabling Technologies and Integrated System Design; SYMP 5 Structural Health Monitoring/NDE; and SYMP 6 Bio-inspired Smart Materials and Structures. In addition, the conference introduced a new student and young professional development symposium. Authors of papers in the materials areas (symposia 1, 2 and 6) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart Materials and Structures. This set of papers demonstrates the exceptional quality and originality of the conference presentations. We are appreciative of their efforts in producing this collection of highly relevant articles on smart materials.

FOREWORD: 6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF2013)

NASA Astrophysics Data System (ADS)

Wu, Yulin; Wang, Zhengwei; Yuan, Shouqi; Shi, Weidong; Liu, Shuhong; Luo, Xingqi; Wang, Fujun

2013-12-01

The 6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF 2013) was held in Beijing, China, 19-22 September 2013, which was jointly organized by Tsinghua University and Jiangsu University. The co-organizers were Zhejiang University, Zhejiang Sci-Tech University, The State Key Laboratory of Hydroscience and Engineering, The State Key Laboratory of Automotive Safety and Energy and Beijing International Science and Technology Cooperation Base for CO2 Utilization and Reduction. The sponsor of the conference was Concepts NREC. The First International Conference on Pumps and Systems (May 1992), the Second International Conference on Pumps and Fans (October 1995), the Third International Conference on Pumps and Fans (October 1998), and the Fourth International Conference on Pumps and Fans (26-29 August 2002) were all held in Beijing and were organized by the late famous Chinese professor on fluid machinery and engineering, Professor Zuyan Mei of Tsinghua University. The conference was interrupted by the death of Professor Mei in 2003. In order to commemorate Professor Mei, the organizing committee of ICPF decided to continue organizing the conference series. The Fifth Conference on Pumps and Systems (2010 ICPF) took place in Hangzhou, Zhejiang Province, China, 18-21 October 2010, and it was jointly organized by Zhejiang University and Tsinghua University. With the development of renewable energy and new energy in China and in the world, some small types of compressor and some types of pump, as well as wind turbines are developing very fast; therefore the ICPF2013 conference included compressors and wind turbines. The theme of the conference was the application of renewable energy of pumps, compressors, fans and blowers. The content of the conference was the basic study, design and experimental study of compressors, fans, blowers and pumps; the CFD application on pumps and fans, their transient behavior, unsteady flows and multi-phase flow; other fluid machinery and devices, such as, wind turbines, turbochargers and reversible pump-turbines, clearance and sealing, jets, filters and mixers; and their engineering application and their system behavior, especially, the application of the renewable energy of pumps, compressors, fans and blowers. The objective of the conference was to provide an opportunity for researchers, engineers and students to report on the latest developments in the fields of pumps, compressors, fans and turbochargers, as well as systems. The participants were encouraged to present their work in progress with a short lead time, and the conference promoted discussion of the problems encountered. The ICPF2013 brought together 191 scientists and researchers from 14 countries, affiliated with universities, technology centers and industrial firms to debate topics related to advanced technologies for pumps and fans, which would enhance the sustainable development of fluid machinery and fluid engineering. The Scientific Committee selected 166 technical papers on the following topics: (i) Principles of Fluid Machinery, (ii) Pumps, (iii) Compressors, Fans and Turbochargers, (iv) Turbines, (v) Cavitation and Multiphase Flow, (vi) Systems and Other Fluid Machinery, and 10 invited plenary and invited session lectures, which were presented at the conference, to be included in the proceedings. All the papers of ICPF2013, which were published in this volume of IOP Conference Series: Materials Science and Engineering, have been peer reviewed through processes administered by the editors of the ICPF2013, those are Yulin Wu, Zhengwei Wang, Shouqi Yuan, Weidong Shi, Shuhong Liu, Xingqi Luo and Fujun Wang. We sincerely hope that the 6th International Conference on Pumps and Fans with Compressors and Wind Turbines is a significant step forward in the worldwide efforts to address the present challenges facing modern fluid machines. Professor Yulin Wu Chairman of the Local Organizing Committee 6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF2013) October 2013 The PDF contains a list of organizers, sponsors and committees.

Expedition 33 Press Conference

NASA Image and Video Library

2012-10-22

Expedition 33 Flight Engineer Evgeny Tarelkin waves hello as he is introduced at the start of a press conference held at the Cosmonaut Hotel, on Monday, October 22, 2012, in Baikonur, Kazakhstan. Launch of the Soyuz rocket is scheduled for October 23 and will send Expedition 33/34 Flight Engineer Kevin Ford of NASA, Soyuz Commander Oleg Novitskiy and Flight Engineer Evgeny Tarelkin of ROSCOSMOS on a five-month mission aboard the International Space Station. Photo Credit: (NASA/Bill Ingalls)

PREFACE: 4th Global Conference on Materials Science and Engineering (CMSE 2015)

NASA Astrophysics Data System (ADS)

Ruda, H. E.; Khotsianovsky, A.

2015-12-01

IOP Conference Series: Materials Science and Engineering is publishing a volume of conference proceedings that contains a selection of papers presented at the 4th Global Conference on Materials Science and Engineering (CMSE 2015), which is an annual event that started in 2012. CMSE 2015, technically supported by the Institute of Applied Physics and Materials Engineering of University of Macau, organized by Wuhan Advance Materials Society, was successfully held at the University of Macau-new campus located on Hengqin Island from August 3rd-6th, 2015. It aims to bring together leading academic scientists, researchers and scholars to exchange and share their experience and research results on all aspects of Materials Science and Engineering, and to discuss the practical challenges encountered and the solutions adopted. Macau, one of the two special administrative regions of the People's Republic of China, where East meets West, turned out to be an ideal meeting place for domestic and overseas participants of this annual international conference. The conference program included keynote presentations, special sessions, oral and poster contributions. From several hundred submissions, 52 of the most promising and mainstream, IOP-relevant, contributions were included in this volume. The submissions present original ideas or results of general significance, supported by clear reasoning, compelling evidence and methods, theories and practices relevant to the research. The authors state clearly the problems and the significance of their research to theory and practice. Being a successful conference, this event gathered more than 200 qualified and high-level researchers and experts from over 40 countries, including 10 keynote speakers from 6 countries, which created a good platform for worldwide researchers and engineers to enjoy the academic communication. Taking advantage of this opportunity, we would like to thank all participants of this conference, and particularly the authors of all accepted papers for their high quality and fruitful contributions. Special thanks are due to all reviewers for their careful critical reading of the manuscripts and useful comments and suggestions. We do hope that this volume will be beneficial for readers to their future research endeavours and careers. We also gratefully acknowledge tremendous efforts and dedication of many individuals, especially CMSE Conference Secretary Ms. Liu Qin, Editor Anete Ashton and all the Editorial Board members in IOP Publishing for their support in producing the proceedings of this event. Guest Editors: Prof. Harry E. Ruda University of Toronto, Canada Dr. Alexander Khotsianovsky Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine, Ukraine

Self-Assembly of Reconfigurable By-Design Optical Materials with Molecular-Level Control

DTIC Science & Technology

2014-09-21

International Conference on Metamaterials, Photonic Crystals and Plasmonics, Singapore, May 20 - 23, 2014. Zhang, W. “Design, Synthesis, and Applications of...metal  nanoparticles  positioned  in  3D   crystal   lattices...materials such as photonic crystal and metamaterial hold high promise of providing a path to by-design optical materials with engineered optical

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Vladimir Solovyov, Chief Flight Director, MCC-M, answers reporters questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Vitaly Lopota, President, General Designer, RSC-Energia, answers reporters questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Alexei Krasnov, Director of Manned Space Programs Department, Roscosmos, answers reporters questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Managers from NASA, Roscosmos, RSC-Energia and other related agencies answer reporters questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

American power conference: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-01-01

The first volume of this conference contains papers on the following topics: (1) Controls, monitoring, and expert systems (Harnessing microprocessor revolution for a more competitive power industry; Plant control--Upgrades; Neural network applications); (2) Diversification and globalization (Electric utility diversification/globalization--Panel; Private power in developing countries); (3) Environment and clean air (Clean Air compliance costs; Site selection for power stations and related facilities; Electric utility trace substance emissions; Solid waste disposal and commercial use; Precipitators/fabric filters; and Effect of flow modifications on fisheries and water quality); (4) Generation--Fuel options equipment (Alternate fuels; Advances in fuel cells for electric power applications; Secondary containmentmore » and seismic requirements for petrochemical facilities; Clean coal technology demonstration; Advanced energy systems; Hydropower); (5) Nuclear operations options (Radioactive waste management and disposal; Off normal conditions; Advanced light water reactors--15 years after TMI; Structural dynamic analyses for nuclear power plants); (6) Retrofit, betterment, repowering maintenance (Project management; Improving competitiveness through process re-engineering; Central stations; Water and wastewater treatment); (7) System planning, operation demand maintenance (Transmission system access; Stability; Systems planning); (8) Transmission and distribution (Transformers; Relaying for system protection; Managing EMF effects); and (9) Education (Power engineering). 155 papers have been processed separately for inclusion on the data base.« less

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014)

NASA Astrophysics Data System (ADS)

2014-04-01

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014), was held at the Media Hotel, Jakarta, Indonesia, on 13-14 January 2014. The ScieTech 2014 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. ScieTech 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Mathematics, Chemistry and Physics. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 187 papers and after rigorous review, 50 papers were accepted. The participants come from 16 countries. There are 5 (Five) Paralell Sessions and Four Keynote Speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2014. The Editors of the Scietech 2014 Proceedings: Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. P.N. Gajjar

Surrogate species selection for assessing potential adverse environmental impacts of genetically engineered insect-resistant plants on non-target organisms.

PubMed

Carstens, Keri; Cayabyab, Bonifacio; De Schrijver, Adinda; Gadaleta, Patricia G; Hellmich, Richard L; Romeis, Jörg; Storer, Nicholas; Valicente, Fernando H; Wach, Michael

2014-01-01

Most regulatory authorities require that developers of genetically engineered insect-resistant (GEIR) crops evaluate the potential for these crops to have adverse impacts on valued non-target organisms (NTOs), i.e., organisms not intended to be controlled by the trait. In many cases, impacts to NTOs are assessed using surrogate species, and it is critical that the data derived from surrogates accurately predict any adverse impacts likely to be observed from the use of the crop in the agricultural context. The key is to select surrogate species that best represent the valued NTOs in the location where the crop is going to be introduced, but this selection process poses numerous challenges for the developers of GE crops who will perform the tests, as well as for the ecologists and regulators who will interpret the test results. These issues were the subject of a conference "Surrogate Species Selection for Assessing Potential Adverse Environmental Impacts of Genetically Engineered Plants on Non-Target Organisms" convened by the Center for Environmental Risk Assessment, ILSI Research Foundation. This report summarizes the proceedings of the conference, including the presentations, discussions and the points of consensus agreed to by the participants.

Strekalov performing maintenance on Core module control panel

NASA Image and Video Library

1995-07-01

NM18-302-025 (March-July 1995) --- Onboard Mir's base block module cosmonaut Gennadiy M. Strekalov, flight engineer, prepares to check the air quality control and the propulsion system of the station. Strekalov told reporters at a July 18 press conference in Houston that even though he tried not to awaken astronaut Norman E. Thagard, who was asleep nearby, he was unable to keep from disturbing the cosmonaut researcher. He went on to point out that Thagard was always very cooperative and tolerant of such interruptions.

Evaluation of the 1997 Joint National Conference, Women in Engineering Program Advocates Network (WEPAN) and National Association of Minority Engineering Program Administrators (NAMEPA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brainard, Suzanne G.

1997-07-01

The primary goal of the 1997 Joint National Conference was to unite NAMEPA and WEPAN in a unique collaborative effort to further the cause of increasing the participation of women and minorities in science and engineering. The specific objectives were to: (1) conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women and minorities in engineering program; (2) provide assistance in fundraising and grant writing; (3) profile women in engineering programs of excellence; (4) sponsor inspiring knowledgeable and motivational keynote speakers; and (5) offer a series of workshops focused on a multitude of topics.

Developments in x-ray tomography I - IX

NASA Astrophysics Data System (ADS)

Stock, S. R.

2016-10-01

Nine Developments in X-ray Tomography conferences have been held previously, and this paper summarizes data from these conference proceedings. The Developments conference provides snapshots of the x-ray tomography field which spans clinical and biological applications, engineering and industrial studies and physical sciences.

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 Soyuz Commander Mikhail Tyurin of Roscosmos, center, talks as Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, left, and, Flight Engineer Rick Mastracchio of NASA listen, while quarantine behind glass, during the final press conference held a day ahead of their launch to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

AUTHENTIC INVOLVEMENT IN INTERDISCIPLINARY DESIGN, PROCEEDINGS OF CONFERENCE ON ENGINEERING DESIGN EDUCATION (3D, CARNEGIE INSTITUTE OF TECHNOLOGY, JULY 12-13, 1965).

ERIC Educational Resources Information Center

BULKELEY, PETER Z.

REPORTED ARE THE PROCEEDINGS OF THE THIRD CONFERENCE ON ENGINEERING DESIGN EDUCATION. ITS CONCERNS WERE THE CRITICISM AND DISSEMINATION OF RESULTS OF DESIGN LABORATORY WORKSHOPS HELD EARLIER AT EACH OF THE PARTICIPATING INSTITUTIONS. WORKSHOPS WERE CONCERNED WITH FACULTY DEVELOPMENT TO DETERMINE WHETHER TEACHERS, MANY OF WHOM WERE EXPERIENCED IN…

2011 Quantum Control of Light & Matter Gordon Research Conference (July 31-August 5, 2011, Mount Holyoke College, South Hadley, MA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas Weinacht

2011-08-05

Quantum control of light and matter is the quest to steer a physical process to a desirable outcome, employing constructive and destructive interference. Three basic questions address feasibility of quantum control: (1) The problem of controllability, does a control field exist for a preset initial and target state; (2) Synthesis, constructively finding the field that leads to the target; and (3) Optimal Control Theory - optimizing the field that carries out this task. These continue to be the fundamental theoretical questions to be addressed in the conference. How to realize control fields in the laboratory is an ongoing challenge. Thismore » task is very diverse viewing the emergence of control scenarios ranging from attoseconds to microseconds. How do the experimental observations reflect on the theoretical framework? The typical arena of quantum control is an open environment where much of the control is indirect. How are control scenarios realized in dissipative open systems? Can new control opportunities emerge? Can one null decoherence effects? An ideal setting for control is ultracold matter. The initial and final state can be defined more precisely. Coherent control unifies many fields of physical science. A lesson learned in one field can reflect on another. Currently quantum information processing has emerged as a primary target of control where the key issue is controlling quantum gate operation. Modern nonlinear spectroscopy has emerged as another primary field. The challenge is to unravel the dynamics of molecular systems undergoing strong interactions with the environment. Quantum optics where non-classical fields are to be generated and employed. Finally, coherent control is the basis for quantum engineering. These issues will be under the limelight of the Gordon conference on Quantum Control of Light and Matter.« less

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Managers from NASA, Roscosmos, RSC-Energia, TsNIIMash and other related agencies answer reporters questions during a Soyuz post-docking press conference at the Russian mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

Taking the initiative: A leadership conference for women in science and engineering

NASA Technical Reports Server (NTRS)

1994-01-01

The conference sprang from discussions on the current climate that women face in science, mathematics, engineering, and technology. The conference (and this document) is a beginning, not a culmination, of women's learning leadership skills. Conferees were active, articulate, energetic, and ready to learn leadership qualities, some of which seem universal, others that appear to require skills in specific fields. After the introduction, the workshops and presentations are arranged under vision and direction, barriers, alignment and communication, and motivation and inspiration. Some statistics are presented on women degrees and employment in various fields.

FIBER-TEX 1991: The Fifth Conference on Advanced Engineering Fibers and Textile Structures for Composites

NASA Technical Reports Server (NTRS)

Buckley, John D. (Editor)

1992-01-01

This document is a compilation of papers presented at a joint NASA/North Carolina State University/DoD/Clemson University/Drexel University conference on Fibers, Textile Technology, and Composites Structures held at the College of Textiles Building on Centennial Campus of North Carolina State University, Raleigh, North Carolina on October 15-17, 1991. Conference papers presented information on advanced engineering fibers, textile processes and structures, structural fabric production, mechanics and characteristics of woven composites, pultruded composites, and the latest requirements for the use of textiles in the production of composite materials and structures.

Taking the initiative. A leadership conference for women in science and engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1994-01-01

The conference sprang from discussions on the current climate that women face in science, mathematics, engineering, and technology. The conference (and this document) is a beginning, not a culmination, of women`s learning leadership skills. Conferees were active, articulate, energetic, and ready to learn leadership qualities, some of which seem universal, others that appear to require skills in specific fields. After the introduction, the workshops and presentations are arranged under vision and direction, barriers, alignment and communication, and motivation and inspiration. Some statistics are presented on women degrees and employment in various fields.

Proceedings of Naval Facilities Engineering Command Ocean Engineering Conference Held at Washington DC on 23-25 September 1969

DTIC Science & Technology

1969-09-01

use a "plucking" process rather than a pruning " process with our established projects. In this way, the im- portant projects will be accomplished in...Enger, CEC, USN, Commander, NAVFAC 1000-1015 "Ocean Engineering Capt. W.A. Walls Policies" 1015-1030 Coffee Break 1030-1045 Conference Objectives Dr...of Structures a. SEALAB b. TEKTITE Dr. J.D. Stachiw, NCEL c. Concrete Structures D. Potter, NAVFAC d. Penetrations 0945-1000 Coffee Break 1000-1100 e

History of the Fluids Engineering Division

DOE PAGES

Cooper, Paul; Martin, C. Samuel; O'Hern, Timothy J.

2016-08-03

The 90th Anniversary of the Fluids Engineering Division (FED) of ASME will be celebrated on July 10–14, 2016 in Washington, DC. The venue is ASME's Summer Heat Transfer Conference (SHTC), Fluids Engineering Division Summer Meeting (FEDSM), and International Conference on Nanochannels and Microchannels (ICNMM). The occasion is an opportune time to celebrate and reflect on the origin of FED and its predecessor—the Hydraulic Division (HYD), which existed from 1926–1963. Furthermore, the FED Executive Committee decided that it would be appropriate to publish concurrently a history of the HYD/FED.

History of the Fluids Engineering Division

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Paul; Martin, C. Samuel; O'Hern, Timothy J.

The 90th Anniversary of the Fluids Engineering Division (FED) of ASME will be celebrated on July 10–14, 2016 in Washington, DC. The venue is ASME's Summer Heat Transfer Conference (SHTC), Fluids Engineering Division Summer Meeting (FEDSM), and International Conference on Nanochannels and Microchannels (ICNMM). The occasion is an opportune time to celebrate and reflect on the origin of FED and its predecessor—the Hydraulic Division (HYD), which existed from 1926–1963. Furthermore, the FED Executive Committee decided that it would be appropriate to publish concurrently a history of the HYD/FED.

NACA Conference on Turbojet-Engine Thrust Augmentation Research: A Compilation of the Papers Presented by NACA Staff Members

NASA Technical Reports Server (NTRS)

1948-01-01

The conference on Turbojet-Engine Thrust-Augmentation Research was organized by the NACA to present in summarized form the results of the latest experimental and analytical investigations conducted at the Lewis Flight Propulsion Laboratory on methods of augmenting the thrust of turbojet engines. The technical discussions are reproduced herewith in the same form in which they were presented. The original presentation in this record are considered as complementary to, rather than substitutes for, the committee's system of complete and formal reports.

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 Flight Engineer Rick Mastracchio of NASA talks, while in quarantine behind glass, during the final press conference held a day ahead of his launch with fellow crew mates, Soyuz Commander Mikhail Tyurin of Roscosmos, and, Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 Soyuz Commander Yuri Malenchenko answers reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. The launch of the Soyuz spacecraft with Malenchenko, NASA Flight Engineer Sunita Williams and JAXA Flight Engineer Akihiko Hoshide is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency is seen in quarantine, behind glass, during the final press conference held a day ahead of his launch with fellow crew mates, Expedition 38 Soyuz Commander Mikhail Tyurin of Roscosmos, and, Flight Engineer Rick Mastracchio of NASA, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 Soyuz Commander Mikhail Tyurin of Roscosmos is seen in quarantine behind glass during the final press conference held a day ahead of his launch with fellow crew mates, Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, and, Flight Engineer Rick Mastracchio of NASA, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 Soyuz Commander Mikhail Tyurin of Roscosmos, right, talks as Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, listens, from quarantine behind glass, during the final press conference held a day ahead of their launch with fellow crew mate, Flight Engineer Rick Mastracchio of NASA, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 54 Press Conference

NASA Image and Video Library

2017-12-16

Expedition 54 flight engineer Scott Tingle is seen in quarantine, behind glass, during a press conference, Saturday, Dec. 16, 2017 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Tingle, Soyuz Commander Anton Shkaplerov of Roscosmos, and flight engineer Norishige Kanai of the Japan Aerospace Exploration Agency (JAXA) are scheduled to launch to the International Space Station aboard the Soyuz spacecraft from the Baikonur Cosmodrome on December 17. Photo Credit: (NASA/Joel Kowsky)

Expedition 55 Press Conference

NASA Image and Video Library

2018-03-20

Expedition 55 flight engineer Ricky Arnold is seen in quarantine, behind glass, during a press conference, Tuesday, March 20, 2018 a the Cosmonaut Hotel in Baikonur, Kazakhstan. Arnold and his fellow Expedition 55 crew members Oleg Artemyev of Roscosmos and flight engineer Drew Feustel of NASA are scheduled to launch to the International Space Station aboard the Soyuz MS-08 spacecraft on Wednesday, March, 21. Photo Credit: (NASA/Joel Kowsky)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 flight engineer Steve Swanson of NASA, Soyuz commander Aleksander Skvortsov of the Russian Federal Space Agency, Roscosmos, and flight engineer Oleg Artemyev of Roscosmos are seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 NASA Flight Engineer Sunita Williams is presented with a traditional Kazakh whip during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. The launch of the Soyuz spacecraft with Williams, Soyuz Commander Yuri Malenchenko and JAXA Flight Engineer Akihiko Hoshide is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Technology Utilization, the Key to Independence. Proceedings of the Annual Conference on Rehabilitation Engineering (5th, Houston, Texas, August 22-26, 1982). Volume 2.

ERIC Educational Resources Information Center

O'Leary, James P., Ed.; O'Reagan, James R., Ed.

This document contains abstracts of all papers presented at the conference. The papers demonstrate how the results of rehabilitation engineering activities have increased the independence of handicapped people and enabled them to more easily integrate their lives into the mainstream of society. The 136 abstracts are organized into the following…

The Rotary Combustion Engine: a Candidate for General Aviation. [conferences

NASA Technical Reports Server (NTRS)

1978-01-01

The state of development of the rotary combustion engine is discussed. The nonturbine engine research programs for general aviation and future requirements for general aviation powerplants are emphasized.

(Tribology conferences and forums)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yust, C.S.

The principal meeting attended during this trip was the Japan International Tribology Conference Nagoya 1990. The conference encompassed a wide range of topics, including the tribology of ceramics, the tribology in high-performance automobiles, and many aspects of lubrication technology. Associated forums were also held on the tribology of advanced ceramics, on solid lubrication, and on automotive lubricants. Presentations made during the latter forum discussed anticipated trends in engine development and anticipated improvements in lubricants required for the next generation of engines. In addition to meetings, site visits were made to five industrial organizations to discuss ceramic tribology. Nippon Steel Corporationmore » and Toshiba Corporation are both very active in the ceramic area, Nippon Steel from their interest in research on new materials and Toshiba from both an interest in new materials and in support of their work in electronic devices. Two engine manufacturers were also visited, Toyota Motor Corporation, and Nissan Motor Co., Ltd. These companies were somewhat reserved in their discussion of progress in the utilization of ceramics in automobile engines.« less

The Boundary Integral Equation Method for Porous Media Flow

NASA Astrophysics Data System (ADS)

Anderson, Mary P.

Just as groundwater hydrologists are breathing sighs of relief after the exertions of learning the finite element method, a new technique has reared its nodes—the boundary integral equation method (BIEM) or the boundary equation method (BEM), as it is sometimes called. As Liggett and Liu put it in the preface to The Boundary Integral Equation Method for Porous Media Flow, “Lately, the Boundary Integral Equation Method (BIEM) has emerged as a contender in the computation Derby.” In fact, in July 1984, the 6th International Conference on Boundary Element Methods in Engineering will be held aboard the Queen Elizabeth II, en route from Southampton to New York. These conferences are sponsored by the Department of Civil Engineering at Southampton College (UK), whose members are proponents of BIEM. The conferences have featured papers on applications of BIEM to all aspects of engineering, including flow through porous media. Published proceedings are available, as are textbooks on application of BIEM to engineering problems. There is even a 10-minute film on the subject.

2010 MULTIPHOTON PROCESSES GORDON RESEARCH CONFERENCE, JUNE 6-11, 2010, TILTON, NH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mette Gaarde

2010-06-11

The Gordon Research Conference on Multiphoton Processes will be held for the 15th time in 2010. The meeting continues to evolve as it embraces both the rapid technological and intellectual growth in the field as well as the multi-disciplinary expertise of the participants. This time the sessions will focus on: (1) Ultrafast coherent control; (2) Free-electron laser experiments and theory; (3) Generation of harmonics and attosecond pulses; (4) Ultrafast imaging; (5) Applications of very high intensity laser fields; (6) Strong-field processes in molecules and solids; (7) Attosecond science; and (8) Controlling light. The scientific program will blur traditional disciplinary boundariesmore » as the presenters and discussion leaders involve chemists, physicists, and optical engineers, representing both experiment and theory. The broad range of expertise and different perspectives of attendees should provide a stimulating and unique environment for solving problems and developing new ideas in this rapidly evolving field.« less

IBC’s 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics International Conferences and the 2012 Annual Meeting of The Antibody Society

PubMed Central

Klöhn, Peter-Christian; Wuellner, Ulrich; Zizlsperger, Nora; Zhou, Yu; Tavares, Daniel; Berger, Sven; Zettlitz, Kirstin A.; Proetzel, Gabriele; Yong, May; Begent, Richard H.J.; Reichert, Janice M

2013-01-01

The 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences, and the 2012 Annual Meeting of The Antibody Society, organized by IBC Life Sciences with contributions from The Antibody Society and two Scientific Advisory Boards, were held December 3–6, 2012 in San Diego, CA. The meeting drew over 800 participants who attended sessions on a wide variety of topics relevant to antibody research and development. As a prelude to the main events, a pre-conference workshop held on December 2, 2012 focused on intellectual property issues that impact antibody engineering. The Antibody Engineering Conference was composed of six sessions held December 3–5, 2012: (1) From Receptor Biology to Therapy; (2) Antibodies in a Complex Environment; (3) Antibody Targeted CNS Therapy: Beyond the Blood Brain Barrier; (4) Deep Sequencing in B Cell Biology and Antibody Libraries; (5) Systems Medicine in the Development of Antibody Therapies/Systematic Validation of Novel Antibody Targets; and (6) Antibody Activity and Animal Models. The Antibody Therapeutics conference comprised four sessions held December 4–5, 2012: (1) Clinical and Preclinical Updates of Antibody-Drug Conjugates; (2) Multifunctional Antibodies and Antibody Combinations: Clinical Focus; (3) Development Status of Immunomodulatory Therapeutic Antibodies; and (4) Modulating the Half-Life of Antibody Therapeutics. The Antibody Society’s special session on applications for recording and sharing data based on GIATE was held on December 5, 2012, and the conferences concluded with two combined sessions on December 5–6, 2012: (1) Development Status of Early Stage Therapeutic Antibodies; and (2) Immunomodulatory Antibodies for Cancer Therapy. PMID:23575266

IBC's 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences and the 2012 Annual Meeting of The Antibody Society: December 3-6, 2012, San Diego, CA.

PubMed

Klöhn, Peter-Christian; Wuellner, Ulrich; Zizlsperger, Nora; Zhou, Yu; Tavares, Daniel; Berger, Sven; Zettlitz, Kirstin A; Proetzel, Gabriele; Yong, May; Begent, Richard H J; Reichert, Janice M

2013-01-01

The 23rd Annual Antibody Engineering, 10th Annual Antibody Therapeutics international conferences, and the 2012 Annual Meeting of The Antibody Society, organized by IBC Life Sciences with contributions from The Antibody Society and two Scientific Advisory Boards, were held December 3-6, 2012 in San Diego, CA. The meeting drew over 800 participants who attended sessions on a wide variety of topics relevant to antibody research and development. As a prelude to the main events, a pre-conference workshop held on December 2, 2012 focused on intellectual property issues that impact antibody engineering. The Antibody Engineering Conference was composed of six sessions held December 3-5, 2012: (1) From Receptor Biology to Therapy; (2) Antibodies in a Complex Environment; (3) Antibody Targeted CNS Therapy: Beyond the Blood Brain Barrier; (4) Deep Sequencing in B Cell Biology and Antibody Libraries; (5) Systems Medicine in the Development of Antibody Therapies/Systematic Validation of Novel Antibody Targets; and (6) Antibody Activity and Animal Models. The Antibody Therapeutics conference comprised four sessions held December 4-5, 2012: (1) Clinical and Preclinical Updates of Antibody-Drug Conjugates; (2) Multifunctional Antibodies and Antibody Combinations: Clinical Focus; (3) Development Status of Immunomodulatory Therapeutic Antibodies; and (4) Modulating the Half-Life of Antibody Therapeutics. The Antibody Society's special session on applications for recording and sharing data based on GIATE was held on December 5, 2012, and the conferences concluded with two combined sessions on December 5-6, 2012: (1) Development Status of Early Stage Therapeutic Antibodies; and (2) Immunomodulatory Antibodies for Cancer Therapy.

Distance Learning Conference Proceedings (Ruidoso, New Mexico, October 1989).

ERIC Educational Resources Information Center

Alexander, John B., Comp.; And Others

The declining emphasis on science, mathematics, and engineering education in the United States together with the necessity of the nation to ensure a continuous supply of trained practitioners in those fields was the consideration that prompted the conference reported in this document. The conference participants--who were representatives of the…

Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

NASA Astrophysics Data System (ADS)

2016-02-01

The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional Properties Synthesized through Top Down Approach”, which was warmly welcomed by an eager and highly motivated audience. The second keynote speaker was Prof. Ir. Dradjad Irianto (ITB, Indonesia) on “Collaborative Manufacturing for Small-medium Enterprises”. The organizers are very grateful to them for supporting the conference and sharing their latest research results with the conference participants. The conference organizers would like to express our sincere gratitude and thanks to the honorary chairman Prof. Dato, Dr. Daing Nasir Ibrahim and Prof. Dr. Wan Azhar Wan Yusoff and organizing committee members of iMEC2015, Assoc. Prof. Dr. A.K. Prasada Rao (chairman), Dr. Ing. Mohd Azmir Mohd Azhari (co-chairman), and all committee members Assoc. Prof. Dr. Ahmad Razlan Yusoff, Assoc. Prof. Dr. Ismed Iskandar, Dr Noraini Mohd Razali, Dr Muhammed Nafis Osman Zahid, Dr Noor Mazni Ismail, Dr Izwan Ismail, Dr Zamzuri Hamedon, Dr Faiz Mohd Turan, Ms Suraya Sulaiman and secretariat Miss Zuryaty, Mrs Wan Norshihah, Mr. Mohd Khairulnazri and Mr Rafilah and also a million thanks to the steering committee from APCOMS Prof. Dr. Kadarsyah Suryadi, Prof. Dr. Bermawi, P. Iskandar, Prof. Dr. Abdul Hakim Halim, Prof. Dr. Dradjad Irianto, Dr. TMA Ari Samadhi, Ir. I Made Dana Tangkas and APCOMS organizing committee Prof. Dr. Abdul Hakim Halim (chair), Dr. Rachmawati Wangsaputra (co-chair) and other committee members Dr. Iwan Inrawan Wiratmadja, Dr. Anas Ma'ruf, Dr. Sukoyo and Dr. Wisnu Aribowo. The editorial board are indebted to all of the reviewers who were willing to spend their precious time in reviewing the papers. Thanks also to all who contributed direct or indirectly in making this conference a success, especially Mr. Mohd Khairulnazri in helping the editors complete the proceedings. Dr. Zamzuri Hamedon Editor in-chief iMEC & APCOMS 2015 Associate Editors 1. Assoc. Prof. Dr. A.K. Prasada Rao 2. Assoc. Prof. Dr. Ahmad Razlan Yusoff 3. Dr. Ing. Mohd Azmir Mohd Azhari 4. Dr. Muhammed Nafis Osman Zahid 5. Dr. Faiz Mohd Turan

Chemical Engineering Division Activities

ERIC Educational Resources Information Center

Chemical Engineering Education, 1978

1978-01-01

The 1978 ASEE Chemical Engineering Division Lecturer was Theodore Vermeulen of the University of California at Berkeley. Other chemical engineers who received awards or special recognition at a recent ASEE annual conference are mentioned. (BB)

Special Sessions: International Conference on Rehabilitation Engineering (2nd, Ottawa, Canada, June 17-22, 1984). Combined with RESNA 7th Annual Conference = Seances speciales: conference internationale sur la technologie de reeducation fonctionnelle (2nd, Ottawa, Canada, Juin 17-22, 1984). Tenue parallelement a la RESNA 7e conference annuelle.

ERIC Educational Resources Information Center

Rehabilitation Engineering Society of North America, Washington, DC.

These proceedings of the conference's Special Sessions contain 85 papers organized into the following sections: "Implant Materials and Devices,""Communication Aids,""Neural Prosthetics for the Disabled,""Current Concepts in Spinal Cord Rehabilitation,""New Models in…

The 1991 International Aerospace and Ground Conference on Lightning and Static Electricity, volume 2

NASA Technical Reports Server (NTRS)

1991-01-01

The proceedings of the conference are reported. The conference focussed on lightning protection, detection, and forecasting. The conference was divided into 26 sessions based on research in lightning, static electricity, modeling, and mapping. These sessions spanned the spectrum from basic science to engineering, concentrating on lightning prediction and detection and on safety for ground facilities, aircraft, and aerospace vehicles.

PREFACE: The Science of Making Torque from Wind

NASA Astrophysics Data System (ADS)

Sørensen, Jens N.; Hansen, Martin O. L.; Hansen, Kurt S.

2007-06-01

Wind energy has for many years been the fastest developing energy source. This is most easily demonstrated by some numbers. In 2006 a total of about 7.6 GW of new wind energy capacity was installed in Europe, an increase of more than 20% over the year before. Europe's cumulative wind power capacity has now reached more than 50 GW. At the beginning of 2007, the European Commission published its new energy strategy, which recommends a 20% target for the share of renewable energy in the EU by 2020. New initiatives have also been launched in the U.S. and Asia to comply with the need for a reduction in the emissions of CO2 and to create a cleaner environment based on renewable energy. Since 1980 the average size of wind turbines has grown by a factor of 100 from 50 kW to today's 5 MW machines. This enormous increase in size would not have been possible without the involvement of well-educated engineers and scientists. Research institutions and universities have contributed significantly to this development by providing basic knowledge as well as sophisticated software and measuring campaigns. In order to comply with the fast development in wind turbine technology there is a growing need for both well-educated scientists and for a further development of sophisticated predictive tools. For many years progress in technology development was presented at the European Wind Energy Conference (EWEC) conference organized by the European Wind Energy Association (EWEA). Because of the maturity of the industry and the many important topics involved in the continued development of wind power, the relative share of the technical and scientific sessions at EWEC has decreased dramatically. Hence it was desirable to find an alternative forum for the exchange of ideas and techniques within more specialized topics. As a consequence the European Academy of Wind Energy (EAWE) was created in 2003 in order to support education and research. It is the intention of this special topics conference to bring together scientists and engineers working in the fields of aerodynamics, aeroelasticity, aeroacoustics, aeroelastic control, wind conditions and wind farms. The first conference entitled `The Science of making Torque from Wind' was organized by DUWIND and held at Delft University, 19-21 April 2004. Owing to the great success of this conference where more than 60 papers were presented, we decided to follow it with a similar conference at the Technical University of Denmark (DTU) in Lyngby. It is our hope that others will take up the idea and continue this series of conferences. An explicit objective of the conference is to meet the high standards applied in several other branches of science and technology. The EAWE has the responsibility for the scientific quality of the content. All papers presented at the conference have had an abstract review as well as a full paper review by at least two reviewers. Out of the approximately 120 submitted abstracts, 86 papers were finally approved to be presented at the conference. It is expected that many of the papers will subsequently be published in scientific journals. Toward that end, the editors of Wind Energy and Journal of Solar Energy Engineering have expressed their interest in letting the most promising papers be subjected to a second review, for the purpose of having them published as journal papers. The EWEA staff is thanked for organizing the PR on the conference and the EAWE board members for valuable help in the reviewing process and for delivering session chairmen. Staff members at the Department of Mechanical Engineering at DTU and Risø were responsible for the organization. Special thanks go to DTU for providing lecture and meeting rooms, and to LM Glasfiber, Vestas Wind Systems and Siemens Wind Power for financial support. Jens Nørkær Sørensen, Conference Chairman 21 June 2007

Macroscale delivery systems for molecular and cellular payloads

NASA Astrophysics Data System (ADS)

Kearney, Cathal J.; Mooney, David J.

2013-11-01

Macroscale drug delivery (MDD) devices are engineered to exert spatiotemporal control over the presentation of a wide range of bioactive agents, including small molecules, proteins and cells. In contrast to systemically delivered drugs, MDD systems act as a depot of drug localized to the treatment site, which can increase drug effectiveness while reducing side effects and confer protection to labile drugs. In this Review, we highlight the key advantages of MDD systems, describe their mechanisms of spatiotemporal control and provide guidelines for the selection of carrier materials. We also discuss the combination of MDD technologies with classic medical devices to create multifunctional MDD devices that improve integration with host tissue, and the use of MDD technology in tissue-engineering strategies to direct cell behaviour. As our ever-expanding knowledge of human biology and disease provides new therapeutic targets that require precise control over their application, the importance of MDD devices in medicine is expected to increase.

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 JAXA (Japan Aerospace Exploration Agency) Flight Engineer Akihiko Hoshide answers reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. The launch of the Soyuz spacecraft with Hoshide, Soyuz Commander Yuri Malenchenko, and NASA Flight Engineer Sunita Williams is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 Flight Engineer Sunita Williams, right, answers reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. Seated next to her is Soyuz Commander Yuri Malenchenko. The launch of the Soyuz spacecraft with Williams, Malenchenko, and JAXA Flight Engineer Akihiko Hoshide is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 primary crew flight engineer Steve Swanson of NASA, Soyuz commander Aleksander Skvortsov of the Russian Federal Space Agency, Roscosmos, flight engineer Oleg Artemyev of Roscosmos are seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Expedition 55 Press Conference

NASA Image and Video Library

2018-03-20

Expedition 55 flight engineer Ricky Arnold of NASA, left, Soyuz Commander Oleg Artemyev of Roscosmos, center, and flight engineer Drew Feustel of NASA, right, are seen in quarantine, behind glass, during a press conference, Tuesday, March 20, 2018 a the Cosmonaut Hotel in Baikonur, Kazakhstan. Arnold, Artemyev, and Feustel are scheduled to launch to the International Space Station aboard the Soyuz MS-08 spacecraft on Wednesday, March, 21. Photo Credit: (NASA/Joel Kowsky)

Expedition 55 Press Conference

NASA Image and Video Library

2018-03-20

Expedition 55 backup crew member Nick Hague of NASA is seen in quarantine, behind glass, during a press conference, Tuesday, March 20, 2018 a the Cosmonaut Hotel in Baikonur, Kazakhstan. Expedition 55 Soyuz Commander Oleg Artemyev of Roscosmos, flight engineer Ricky Arnold and flight engineer Drew Feustel of NASA are scheduled to launch to the International Space Station aboard the Soyuz MS-08 spacecraft on Wednesday, March, 21. Photo Credit: (NASA/Joel Kowsky)

expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 primary crew flight engineer Steve Swanson of NASA, Soyuz commander Aleksander Skvortsov of the Russian Federal Space Agency, Roscosmos, flight engineer Oleg Artemyev of Roscosmos are seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Expedition 54 Press Conference

NASA Image and Video Library

2017-12-16

Expedition 54 Soyuz Commander Anton Shkaplerov of Roscosmos is seen in quarantine, behind glass, during a press conference, Saturday, Dec. 16, 2017 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Shkaplerov, flight engineer Scott Tingle of NASA, and flight engineer Norishige Kanai of the Japan Aerospace Exploration Agency (JAXA) are scheduled to launch to the International Space Station aboard the Soyuz spacecraft from the Baikonur Cosmodrome on December 17. Photo Credit: (NASA/Joel Kowsky)

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 Soyuz Commander Yuri Malenchenko, right, answers reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. Seated next to him is JAXA Flight Engineer Akihiko Hoshide. The launch of the Soyuz spacecraft with Malenchenko, NASA Flight Engineer Sunita Williams and Hoshide is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 backup crew member Barry Wilmore of NASA is seen in quarantine, behind glass, during the final press conference held ahead of the launch of Expedition 39 prime crew members; Soyuz Commander Alexander Skvortsov of the Russian Federal Space Agency, Flight Engineer Steve Swanson of NASA, and Flight Engineer Oleg Artemyev of Roscosmos, to the International Space Station, Monday, March 24, 2014 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Joel Kowsky)

Proceedings of the Conference on Graduate Student Research in Engineering and Technology Education (Minneapolis, Minnesota, May 22, 2008)

ERIC Educational Resources Information Center

National Center for Engineering and Technology Education, 2008

2008-01-01

As part of the usual end of year meeting that has been a feature of the National Center for Engineering and Technology Education (NCETE) project, a conference intending to provide a forum for young voices in an outside of the Center was organized. The basic model for the gathering was borrowed from track and field. This was to be an intellectual…

Expedition 37 Press Conference

NASA Image and Video Library

2013-09-24

Expedition 37 NASA Flight Engineer Michael Hopkins, left, and Soyuz Commander Oleg Kotov share a laugh at a press conference held at the Cosmonaut Hotel, on Tuesday, Sept. 24, 2013, in Baikonur, Kazakhstan. Launch of the Soyuz rocket is scheduled for September 26 and will send Hopkins, Kotov and Russian Flight Engineer Sergei Ryazansky on a five and a half-month mission aboard the International Space Station. Photo Credit: (NASA/Carla Cioffi)

Expedition 37 Press Conference

NASA Image and Video Library

2013-09-24

Expedition 37 Soyuz Commander Oleg Kotov, left, and Russian Flight Engineer Sergey Ryazanskiy share a laugh at a press conference held at the Cosmonaut Hotel, on Tuesday, Sept. 24, 2013, in Baikonur, Kazakhstan. Launch of the Soyuz rocket is scheduled for September 26 and will send Kotov, Ryazanski and NASA Flight Engineer Michael Hopkins on a five and a half-month mission aboard the International Space Station. Photo Credit: (NASA/Carla Cioffi)

Education for Highway Engineering and Highway Transport. Report of the Regional Conference Held at University of Pittsburgh, Friday, November 26, 1920. Bulletin, 1921, No. 47

ERIC Educational Resources Information Center

Johnson, Pyke; John, Walton C.

1921-01-01

This bulletin provides information on the proceedings of the regional conference on education for highway engineering and highway transport that was held at the University of Pittsburgh on November 26, 1920, under the direction of the highway and highway transport education committee. The purpose of this report is: (1) To stimulate greater…

Conference Offers Girls Opportunity to Expand Career Horizons

Science.gov Websites

math, science, technology and non-traditional occupations. The conference will take place Saturday of computers, math, engineering, natural sciences, medical sciences, public service and the

Expedition 19 Press Conference

NASA Image and Video Library

2009-03-24

Expedition 19 Flight Engineer Michael R. Barratt answers questions from behind glass during a press conference on Wednesday, March 25, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 19 Docks to ISS

NASA Image and Video Library

2009-03-27

Mike Hawes, NASA's Acting Associate Administrator, left, looks on as Kirk Shireman, NASA's deputy ISS program manager, answers reporters questions during a Soyuz post-docking press conference at the Russian Mission Control Center in Korolev, Russia on Saturday March 28, 2009. The Soyuz TMA-14 docked to the International Space Station carrying Expedition 19 Commander Gennady I. Padalka, Flight Engineer Michael R. Barratt and Spaceflight Participant Charles Simonyi. Photo Credit: (NASA/Bill Ingalls)

NASA University Research Centers Technical Advances in Education, Aeronautics, Space, Autonomy, Earth and Environment

NASA Technical Reports Server (NTRS)

Jamshidi, M. (Editor); Lumia, R. (Editor); Tunstel, E., Jr. (Editor); White, B. (Editor); Malone, J. (Editor); Sakimoto, P. (Editor)

1997-01-01

This first volume of the Autonomous Control Engineering (ACE) Center Press Series on NASA University Research Center's (URC's) Advanced Technologies on Space Exploration and National Service constitute a report on the research papers and presentations delivered by NASA Installations and industry and Report of the NASA's fourteen URC's held at the First National Conference in Albuquerque, New Mexico from February 16-19, 1997.

The Institute of Biological Engineering 2013 Annual Conference

DTIC Science & Technology

2014-10-30

of Bioengineering University of Washington Presentation: Peptide-Based materials for Drug Delivery Dr. Ya-Ping Sun (Supported by the Grant) Frank...Professor of Biomedical Engineering and Mechanical Engineering and Materials Science Duke University Presentation: Acoustic Microfluidics and New...Triangle Materials Research Science and Engineering Center, Department of Biomedical Engineering, Duke University, Department of Mechanical Engineering

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Berard, Edward V.

1988-01-01

The following topics are discussed in the context of software engineering: early use of the term; the 1968 NATO conference; Barry Boehm's definition; four requirements fo software engineering; and additional criteria for software engineering. Additionally, the four major requirements for software engineering--computer science, mathematics, engineering disciplines, and excellent communication skills--are discussed. The presentation is given in vugraph form.

Cumulative reports and publications through December 31, 1989

NASA Technical Reports Server (NTRS)

1990-01-01

A complete list of reports from the Institute for Computer Applications in Science and Engineering (ICASE) is presented. The major categories of the current ICASE research program are: numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; control and parameter identification problems, with emphasis on effectual numerical methods; computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, structural analysis, and chemistry; computer systems and software, especially vector and parallel computers, microcomputers, and data management. Since ICASE reports are intended to be preprints of articles that will appear in journals or conference proceedings, the published reference is included when it is available.

Electron Technology - ELTE 2013

NASA Astrophysics Data System (ADS)

Szczepański, Paweł; Kisiel, Ryszard; Romaniuk, Ryszard S.

2013-07-01

The paper presents a digest of chosen research and technical work results shown by researchers from technical universities, governmental institutes and research firms during the XIth Scientific Conference on Electron Technology ELTE 2013. ELTE Conference has been held every three years since more than three decades. The ELTE 2013 conference was held in Ryn Castle (Poland) on 16-20 April 2013 and gathered around 270 scientists, theoreticians, technologists and engineers from such areas as material engineering, chemistry, sensors, integrated circuits, electronics engineering, laser industry, photonics, etc. The conference featured the following major four topical sessions - Micro and Nano, Photonics, Materials and Technologies, and Microsystems; two dedicated sessions - a keynote plenary session on hot topics in electron technology, as well as a session on large research projects and grants realized by the relevant community. Oral topical sessions were accompanied by poster sessions. The paper is a succinct topical introduction to the volume of ELTE 2013 proceedings. Over 100 papers, gathered in the volume, present a very relevant cross section and state-of-the-art of this branch of science and technology in Poland with involved international co-operation.

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. The UTM Reno Press Conference on Oct. 19, 2016. (Left to Right) Parimal Kopardekar, NASA Ames Senior Engineer for Air Transportation Systems gave an overview of UTM; Maril Mora, President / CEO of the Reno -Tahoe Airport Authority welcomes NASA and Partners; Tom Wilczek, Aerospace and Defence industry representative and Nevada Governor's Office of Economic Development; Mark Baker, Director of Business Development, Nevada Institute of Autonomous Systems; Manos Maragakis, Dean of the College of Engineering, University of Nevada, Reno.

FIBER-TEX 1992: The Sixth Conference on Advanced Engineering Fibers and Textile Structures for Composites

NASA Technical Reports Server (NTRS)

Buckley, John D. (Editor)

1993-01-01

The FIBER-TEX 1992 proceedings contain the papers presented at the conference held on 27-29 Oct. 1992 at Drexel University. The conference was held to create a forum to encourage an interrelationship of the various disciplines involved in the fabrication of materials, the types of equipment, and the processes used in the production of advanced composite structures. Topics discussed were advanced engineering fibers, textile processes and structures, structural fabric production, mechanics and characteristics of woven composites, and the latest requirements for the use of textiles in the production of composite materials and structures as related to global activities focused on textile structural composites.

1998 IEEE Aerospace Conference. Proceedings.

NASA Astrophysics Data System (ADS)

The following topics were covered: science frontiers and aerospace; flight systems technologies; spacecraft attitude determination and control; space power systems; smart structures and dynamics; military avionics; electronic packaging; MEMS; hyperspectral remote sensing for GVP; space laser technology; pointing, control, tracking and stabilization technologies; payload support technologies; protection technologies; 21st century space mission management and design; aircraft flight testing; aerospace test and evaluation; small satellites and enabling technologies; systems design optimisation; advanced launch vehicles; GPS applications and technologies; antennas and radar; software and systems engineering; scalable systems; communications; target tracking applications; remote sensing; advanced sensors; and optoelectronics.

1st International Nuclear Science and Technology Conference 2014 (INST2014)

NASA Astrophysics Data System (ADS)

2015-04-01

Nuclear technology has played an important role in many aspects of our lives, including agriculture, energy, materials, medicine, environment, forensics, healthcare, and frontier research. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics, and students to share knowledge and experiences about all aspects of nuclear sciences. INST has evolved from a series of national conferences in Thailand called Nuclear Science and Technology (NST) Conference, which has been held for 11 times, the first being in 1986. INST2014 was held in August 2014 and hosted by Thailand Institute of Nuclear Technology (TINT). The theme was "Driving the future with nuclear technology". The conference working language was English. The proceedings were peer reviewed and considered for publication. The topics covered in the conference were: • Agricultural and food applications [AGR] • Environmental applications [ENV] • Radiation processing and industrial applications [IND] • Medical and nutritional applications [MED] • Nuclear physics and engineering [PHY] • Nuclear and radiation safety [SAF] • Other related topics [OTH] • Device and instrument presentation [DEV] Awards for outstanding oral and poster presentations will be given to qualified students who present their work during the conference.

Surrogate species selection for assessing potential adverse environmental impacts of genetically engineered insect-resistant plants on non-target organisms

PubMed Central

Carstens, Keri; Cayabyab, Bonifacio; De Schrijver, Adinda; Gadaleta, Patricia G; Hellmich, Richard L; Romeis, Jörg; Storer, Nicholas; Valicente, Fernando H; Wach, Michael

2014-01-01

Most regulatory authorities require that developers of genetically engineered insect-resistant (GEIR) crops evaluate the potential for these crops to have adverse impacts on valued non-target organisms (NTOs), i.e., organisms not intended to be controlled by the trait. In many cases, impacts to NTOs are assessed using surrogate species, and it is critical that the data derived from surrogates accurately predict any adverse impacts likely to be observed from the use of the crop in the agricultural context. The key is to select surrogate species that best represent the valued NTOs in the location where the crop is going to be introduced, but this selection process poses numerous challenges for the developers of GE crops who will perform the tests, as well as for the ecologists and regulators who will interpret the test results. These issues were the subject of a conference “Surrogate Species Selection for Assessing Potential Adverse Environmental Impacts of Genetically Engineered Plants on Non-Target Organisms” convened by the Center for Environmental Risk Assessment, ILSI Research Foundation. This report summarizes the proceedings of the conference, including the presentations, discussions and the points of consensus agreed to by the participants. PMID:24637519

Discovering Hidden Resources: Partners and Volunteers--Assistive Technology Reuse Programs. Conference Proceedings (Decatur, Georgia, May 1-2, 2000).

ERIC Educational Resources Information Center

RESNA: Association for the Advancement of Rehabilitation Technology, Arlington, VA.

This brief paper summarizes proceedings of a May 2000 conference, Discovering Hidden Resources: Partners and Volunteers--Assistive Technology Reuse Programs, hosted by the Rehabilitation Engineering and Assistive Technology Society of North America. The conference focused on different approaches for involving corporate and private partners in…

ICASE semiannual report, April 1 - September 30, 1989

NASA Technical Reports Server (NTRS)

1990-01-01

The Institute conducts unclassified basic research in applied mathematics, numerical analysis, and computer science in order to extend and improve problem-solving capabilities in science and engineering, particularly in aeronautics and space. The major categories of the current Institute for Computer Applications in Science and Engineering (ICASE) research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification problems, with emphasis on effective numerical methods; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers. ICASE reports are considered to be primarily preprints of manuscripts that have been submitted to appropriate research journals or that are to appear in conference proceedings.

SB6.0: The 6th International meeting on Synthetic Biology, July 9-11, 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kahl, Linda J.

The Synthetic Biology conference series (SBx.0) is the preeminent academic meeting in synthetic biology. Organized by the BioBricks Foundation, the SBx.0 conference series brings together leading researchers, students, industry executives, and policy makers from around the world to share, consider, debate, and plan efforts to make biology easier to engineer. Historically held every two years, the SBx.0 conferences are held in alternating locations in the United States, Europe, and Asia to encourage global participation and collaboration so that the ramifications of synthetic biology research and development are most likely to be safe ethical, and beneficial. On 9-11 July 2013, themore » 6th installment of the synthetic biology conference series (SB6.0) was held on the campus of Imperial College London (http://sb6.biobricks.org). The SB6.0 conference was attended by over 700 people, and many more were able to participate via video digital conference (http://sb6.biobricks.org/digital-conference/). Over the course of three days, the SB6.0 conference agenda included plenary sessions, workshops, and poster presentations covering topics ranging from the infrastructure needs arising when “Systematic Engineering Meets Biological Complexity” and design-led considerations for “Connecting People and Technologies” to discussions on “Engineering Biology for New Materials,” “Assessing Risk and Managing Biocontainment,” and “New Directions for Energy and Sustainability.” The $10,150 grant awarded by the U.S. Department of Energy (DE-SC0010233) to the BioBricks Foundation was used to provide partial reimbursement for the travel expenses of leading researchers from the United States to speak at the SB6.0 conference. A total of $9,450 was used to reimburse U.S. speakers for actual expenses related to the SB6.0 conference, including airfare (economy or coach only), ground transportation, hotel, and registration fees. In addition, $700 of the grant was used to offset direct administrative costs associated with selecting speakers (preparing announcements, evaluating abstract submissions) and handling travel arrangements. Leading U.S. researchers selected to speak at the SB6.0 conference included: Adam Arkin, Ph.D. Division Director of the Physical Biosciences Division at the Lawrence Berkeley National Laboratory and Professor in the Department of Bioengineering at UC Berkeley Jay Keasling, Ph.D. Professor in the Department of Bioengineering at Berkeley, Senior Faculty Scientist and Associate Laboratory Director of the Lawrence Berkeley National Laboratory, and Chief Executive Officer of the Joint BioEnergy Institute. Debra Mathews, Ph.D. Assistant Director for Science Programs for the Johns Hopkins Berman Institute of Bioethics, Assistant Professor in the Department of Pediatrics, and Affiliate Faculty in the McKusick-Nathans Institute of Genetic Medicine, Johns Hopkins School of Medicine. Richard Murray, Ph.D. Thomas E. and Doris Everhart Professor of Control & Dynamical Systems and Bioengineering at Caltech. Sarah Richardson, Ph.D. Distinguished Postdoctoral Fellow in Genomics at the Lawrence Berkeley National Laboratory and the Department of Energy Joint Genome Institute. and others (for a complete listing of speakers presenting at the SB6.0 conference see http://sb6.biobricks.org/speakers/) The SB6.0 conference was the largest synthetic biology conference to date, and highlights of the SB6.0 conference have been published in a special issue of ACS Synthetic Biology (http://pubs.acs.org/toc/asbcd6/3/3). The BioBricks Foundation appreciates the support of the U.S. Department of Energy in helping to make this most influential and important conference in the field of synthetic biology a success.« less

Integrated urban drainage, status and perspectives.

PubMed

Harremoës, P

2002-01-01

This paper summarises the status of urban storm drainage as an integrated professional discipline, including the management-policy interface, by which the goals of society are implemented. The paper assesses the development of the discipline since the INTERURBA conference in 1992 and includes aspects of the papers presented at the INTERURBA-II conference in 2001 and the discussions during the conference. Tools for integrated analysis have been developed, but there is less implementation than could be expected. That is due to lack of adequate knowledge about important mechanisms, coupled with a significant conservatism in the business. However, significant integrated analyses have been reported. Most of them deal with the sewer system and the treatment plant, while few incorporate the receiving water as anything but the object of the loads to be minimised by engineering measures up-stream. Important measures are local infiltration, source control, storage basins, local treatment and real time control. New paradigms have been introduced: risk of pollution due to system failure, technology for water reuse, sustainability, new architecture and greener up-stream solutions as opposed to down-stream concrete solutions. The challenge is to combine the inherited approaches with the new approaches by flexibility and adaptability.

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 backup crew member Reid Wiseman of NASA is seen in quarantine, behind glass, during the final press conference held a day ahead of the launch of Expedition 38 prime crew members; Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, Soyuz Commander Mikhail Tyurin of Roscosmos, and, Flight Engineer Rick Mastracchio of NASA, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 32 Press Conference

NASA Image and Video Library

2012-07-13

Quarantined Expedition 32 JAXA (Japan Aerospace Exploration Agency) Flight Engineer Akihiko Hoshide, left, answers reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Friday, July 13, 2012 in Baikonur, Kazakhstan. Seated next to him is Soyuz Commander Yuri Malenchenko. The launch of the Soyuz spacecraft with Hoshide, Malenchenko, and NASA Flight Engineer Sunita Williams is scheduled for 8:40 a.m. local time on Sunday, July 15. Photo Credit (NASA/Carla Cioffi)

Expedition 31 Crew Press Conference

NASA Image and Video Library

2012-05-14

Quarantined Expedition 31 prime crew members, from left, NASA Flight Engineer Joe Acaba, Russian Soyuz Commander Gennady Padalka, and Russian Flight Engineer Sergei Revin pose for a group photograph during a prelaunch press conference held at the Cosmonaut Hotel on Monday, May 14, 2012 in Baikonur, Kazakhstan. The launch of the Soyuz spacecraft with the crew of three is scheduled for 9:01 a.m. local time on Tuesday, May 15. Photo Credit (NASA/Bill Ingalls)

Expedition 31 Crew Press Conference

NASA Image and Video Library

2012-05-14

Quarantined Expedition 31 prime crew members, from left, NASA Flight Engineer Joe Acaba, Russian Soyuz Commander Gennady Padalka, and Russian Flight Engineer Sergei Revin answer reporters questions from behind glass during a prelaunch press conference held at the Cosmonaut Hotel on Monday, May 14, 2012 in Baikonur, Kazakhstan. The launch of the Soyuz spacecraft with the crew of three is scheduled for 9:01 a.m. local time on Tuesday, May 15. Photo Credit (NASA/Bill Ingalls)

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

NASA's Tracy Caldwell Dyson, left, looks on as Expedition 23 Soyuz Commander Alexander Skvortsov answers a reporters' question during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan on Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Tracy Caldwell Dyson, Soyuz Commander Alexander Skvortsov and Flight Engineer Mikhail Kornienko is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

NASA Technical Reports Server (NTRS)

Hyde, Patricia R.; Loftin, R. Bowen

1993-01-01

The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

Expedition 19 Press Conference

NASA Image and Video Library

2009-03-24

Expedition 19 Flight Engineer Michael R. Barratt smiles at his family from a quarantined glass room after a press conference on Wednesday, March 25, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Preface - 'NANOSMAT-Paris 2017'

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2018-07-01

The "International Conference on Surfaces, Coatings and Nano-Structured Materials" (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of "nano". The 12th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT) was held at the Pierre & Marie Curie University in Paris, France. This conference is in the NANOSMAT conference series. The first two NANOSMAT conferences were held in Portugal (2005, 2007), whereas, the subsequent NANOSMAT meetings were held in Barcelona (Spain), Rome (Italy), Reims (France), Krakow (Poland), Prague (Czech Republic), Granada (Spain), Dublin (Ireland), Manchester (UK) and Aveiro (Portugal).

GE STEM Teacher's Conference

NASA Image and Video Library

2017-07-13

Teachers participate in the Rocketry Engineering Design Challenge during the 2017 GE Foundation High School STEM Integration Conference at the Center for Space Education at NASA's Kennedy Space Center. High school teachers from across the country took part in the week-long conference, which is designed to explore effective ways for teachers, schools and districts from across the country to integrate STEM throughout the curriculum. The conference is a partnership between GE Foundation and the National Science Teachers Association.

2005 Tri-Service Infrastructure Systems Conference and Exhibition

DTIC Science & Technology

2005-08-04

Reclamation Irrigation/Flood Control Reservoirs • Bonny • Swanson • Enders • Harry Strunk • Hugh Butler • Keith Sebelius • Lovewell US Army Corps of...Water Quality – Mentor, Topeka, DeSoto • Irrigation – Waconda, Harlan County, Lovewell • Navigation Support – Milford, Tuttle Creek, Perry • Endangered...1977 LOVL ( Lovewell Reservoir): January 1, 1980 MILD (Milford Lake) August 24, 1964 Kansas City District US Army Corps of Engineers PRECIPATATION GAGES

7th international conference on case histories in geotechnical engineering.

DOT National Transportation Integrated Search

2013-08-01

Funding used to enhance objectives of conference and to present successful case histories of varied project, orally, in posters and in : proceedings. This will become a storehouse of knowledge for future reference.

Expedition 19 Press Conference

NASA Image and Video Library

2009-03-24

Expedition 19 Commander Gennady I. Padalka, left, and Flight Engineer Michael R. Barratt answer questions from behind glass during a press conference on Wednesday, March 25, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Second Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Dollman, Thomas (Compiler)

1988-01-01

The proceedings of the conference are presented. This second conference on Artificial Intelligence for Space Applications brings together a diversity of scientific and engineering work and is intended to provide an opportunity for those who employ AI methods in space applications to identify common goals and to discuss issues of general interest in the AI community.

Welcoming speech from Dean Faculty of Mechanical Engineering, UMP

NASA Astrophysics Data System (ADS)

Taha, Zahari

2012-09-01

In the Name of Allah, the Most Beneficent, the Most Merciful. It is with great pleasure that I welcome the participants of the International Conference of Mechanical Engineering Research 2011. The Prophet Muhammad (peace be upon him) said 'Acquire knowledge and impart it to the people.' (Al Tirmidhi). The quest for knowledge has been from the beginning of time but knowledge only becomes valuable when it is disseminated and applied to benefit humankind. It is hoped that ICMER 2011 will be a platform to gather and disseminate the latest knowledge in mechanical engineering. Academicians, Scientist, Researchers and practitioners of mechanical engineering will be able to share and discuss new findings and applications of mechanical engineering. It is envisaged that the intellectual discourse will result in future collaborations between universities, research institutions and industry both locally and internationally. In particular it is expected that focus will be given to issues on environmental and energy sustainability. Researchers in the mechanical engineering faculty at UMP have a keen interest in technology to harness energy from the ocean. Lowering vehicle emissions has been a primary goal of researchers in the mechanical engineering faculty and the automotive engineering centre as well including developing vehicles using alternative fuels such as biodiesel and renewable sources such as solar driven electric vehicles. Finally I would like to congratulate the organizing committee for their tremendous efforts in organizing the conference. As I wrote this in the Holy Land of Makkah, I pray to Allah swt that the conference will be a success. Prof. Dr. Zahari Taha CEng, MIED, FASc Dean, Faculty of Mechanical Engineering Universiti Malaysia Pahang

Expedition 54 Press Conference

NASA Image and Video Library

2017-12-16

Expedition 54 backup crew member Sergey Prokopev is seen in quarantine, behind glass, during a press conference, Saturday, Dec. 16, 2017 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Expedition 54 prime crew members Soyuz Commander Anton Shkaplerov of Roscosmos, flight engineer Scott Tingle of NASA, and flight engineer Norishige Kanai of the Japan Aerospace Exploration Agency (JAXA) are scheduled to launch to the International Space Station aboard the Soyuz spacecraft from the Baikonur Cosmodrome on December 17. Photo Credit: (NASA/Joel Kowsky)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 backup crew member Elena Serova of the Russian Federal Space Agency, Roscosmos, is seen in quarantine, behind glass, during the final press conference held ahead of the launch of Expedition 39 prime crew members; Soyuz Commander Alexander Skvortsov of the Russian Federal Space Agency, Flight Engineer Steve Swanson of NASA, and Flight Engineer Oleg Artemyev of Roscosmos, to the International Space Station, Monday, March 24, 2014 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 54 Press Conference

NASA Image and Video Library

2017-12-16

Expedition 54 prime crew members flight engineer Norishige Kanai of the Japan Aerospace Exploration Agency (JAXA), left, Soyuz Commander Anton Shkaplerov of Roscosmos, center, and flight engineer Scott Tingle of NASA, left, are seen in quarantine, behind glass, during a press conference, Saturday, Dec. 16, 2017 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Kanai, Shkaplerov, and Tingle are scheduled to launch to the International Space Station aboard the Soyuz spacecraft from the Baikonur Cosmodrome on December 17. Photo Credit: (NASA/Joel Kowsky)

Expedition 38 Press Conference

NASA Image and Video Library

2013-11-06

Expedition 38 backup crew member Alexander Gerst of the European Space Agency is seen in quarantine, behind glass, during the final press conference held a day ahead of the launch of Expedition 38 prime crew members; Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, Soyuz Commander Mikhail Tyurin of Roscosmos, and, Flight Engineer Rick Mastracchio of NASA, to the International Space Station, Wednesday, Nov. 6, 2013 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 backup crew member Aleksandr Samokutyaev of the Russian Federal Space Agency, Roscosmos, is seen in quarantine, behind glass, during the final press conference held ahead of the launch of Expedition 39 prime crew members; Soyuz Commander Alexander Skvortsov of the Russian Federal Space Agency, Flight Engineer Steve Swanson of NASA, and Flight Engineer Oleg Artemyev of Roscosmos, to the International Space Station, Monday, March 24, 2014 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

Expedition 23 crew members NASA’s Tracy Caldwell Dyson (second from left), Russian Alexander Skvortsov and Russian Mikhail Kornienko (right) pose for photographers during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan, Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Tracy Caldwell Dyson, Soyuz Commander Alexander Skvortsov and Flight Engineer Mikhail Kornienko is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

Expedition 23 crew members, from left, NASA’s Tracy Caldwell Dyson, Russian Alexander Skvortsov and Russian Mikhail Kornienko pose for photographers during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan, Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Tracy Caldwell Dyson, Soyuz Commander Alexander Skvortsov and Flight Engineer Mikhail Kornienko is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

Expedition 23 Prelaunch Press Conference

NASA Image and Video Library

2010-03-31

Expedition 23 crew members, from left, NASA’s Tracy Caldwell Dyson, Russian Alexander Skvortsov and Russian Mikhail Kornienko are seen during a press conference held at the Cosmonaut Hotel in Baikonur, Kazakhstan, Thursday, April 1, 2010. The launch of the Soyuz spacecraft with Expedition 23 NASA Flight Engineer Tracy Caldwell Dyson, Soyuz Commander Alexander Skvortsov and Flight Engineer Mikhail Kornienko is scheduled for Friday, April 2, 2010 at 10:04 a.m. Kazakhstan time. Photo Credit: (NASA/Bill Ingalls)

The Effects of Student Narration in College Engineering Classes

DTIC Science & Technology

2015-01-01

93(3), 223-231. 2004. 6. Norman, G., and Schmidt, H., “Effectiveness of Problem-Based Learning Curricula: Theory, Practice and Paper Darts ...conference papers . Dr. Richard Buckley is Lt Col in the U.S. Air Force and an Assistant Professor and Senior Military Faculty at the US Air Force...journal and conference papers . Dr. Dan Jensen is a Professor of Engineering Mechanics at the U.S. Air Force Academy where he has been since 1997. He

Expedition 33 Press Conference

NASA Image and Video Library

2012-10-22

Expedition 33 Soyuz Commander Oleg Novitskiy waves hello as he is introduced at the start of a press conference held at the Cosmonaut Hotel, on Monday, October 22, 2012, in Baikonur, Kazakhstan. Launch of the Soyuz rocket is scheduled for October 23 and will send Expedition 33/34 Flight Engineer Kevin Ford of NASA, Soyuz Commander Oleg Novitskiy and Flight Engineer Evgeny Tarelkin of ROSCOSMOS on a five-month mission aboard the International Space Station. Photo Credit: (NASA/Bill Ingalls)

Expedition 21 Prelaunch Press Conference

NASA Image and Video Library

2009-09-28

Spaceflight Participant Guy Laliberté, left, Expedition 21 Flight Engineer Maxim Suraev, center, and Expedition 21 Flight Engineer Jeffrey N. Williams reveal t-shirts showing their faces superimposed on characters from the Russian movie "White Sun of the Desert" at the end of the press conference, Tuesday, Sept. 29, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. It is tradition for all crews flying on the Soyuz to watch this movie several days before they launch. Photo Credit: (NASA/Bill Ingalls)

PREFACE: XVII International Scientific Conference ''RESHETNEV READINGS''

NASA Astrophysics Data System (ADS)

2015-01-01

The International Scientific Conference ''RESHETNEV READINGS'' is dedicated to the memory of Mikhail Reshetnev, an outstanding scientist, chief-constructor of space-rocket systems and communication satellites. The current volume represents selected proceedings of the main conference materials which were published by XVII International Scientific Conference ''RESHETNEV READINGS'' held on November 12 - 14, 2013. Plenary sessions, round tables and forums will be attended by famous scientists, developers and designers representing the space technology sector, as well as professionals and experts in the IT industry. A number of outstanding academic figures expressed their interest in an event of such a level including Jaures Alferov, Vice-president of the Russian Academy of Sciences (RAS), Academician of RAS, Nobel laureate, Dirk Bochar, General Secretary of the European Federation of National Engineering Associates (FEANI), Prof. Yuri Gulyaev, Academician of RAS, Member of the Presidium of RAS, President of the International Union of Scientific and Engineering Associations, Director of the Institute of Radio Engineering and Electronics of RAS, as well as rectors of the largest universities in Russia, chief executives of well-known research enterprises and representatives of big businesses. We would like to thank our main sponsors such as JSC ''Reshetnev Information Satellite Systems'', JSC ''Krasnoyarsk Engineering Plant'', Central Design Bureau ''Geophysics'', Krasnoyarsk Region Authorities. These enterprises and companies are leading ones in the aerospace branch. It is a great pleasure to cooperate and train specialists for them.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, John T

This is the keynote presentation on the Co-Optimization of Fuels and Engines (Co-Optima) Initiative delivered at SAE International's ICE 2017 - 13th International Conference on Engines & Vehicles held in Capri, Italy.

Graduate Engineering Education Today

ERIC Educational Resources Information Center

Pettit, Joseph M.; Gere, James M.

1969-01-01

Describes rapid growth of graduate education in engineering between 1900 and 1969. Points out need for graduate curricula in engineering that are both practical and research-oriented. Adapted from paper presented at International Conference on the Trends in the Teaching and Training of Engineers, Paris, France, December 9-13, 1968, and at Second…

Expedition 19 Press Conference

NASA Image and Video Library

2009-03-24

Expedition 19 Flight Engineer Michael R. Barratt, left, and backup commander Jeffrey Williams are seen in quarantine behind glass during a press conference on Wednesday, March 25, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Annual Quality Assurance Conference Abstracts by Barbara Marshik

EPA Pesticide Factsheets

25th Annual Quality Assurance Conference. Abstracts: Material and Process Conditions for Successful Use of Extractive Sampling Techniques and Certification Methods Errors in the Analysis of NMHC and VOCs in CNG-Based Engine Emissions by Barbara Marshik

Second annual Transportation Infrastructure Engineering Conference.

DOT National Transportation Integrated Search

2013-10-01

The conference will highlight a few of the current projects that have been sponsored by the Center for Transportation : Infrastructure and Safety (CTIS), a national University Transportation Center at S&T. In operation since 1998, the CTIS supports :...

ASIME 2016 White Paper: Answers to Questions from the Asteroid Miners

NASA Astrophysics Data System (ADS)

Galache, Jl; Graps, A. L.; Asime 2016 Contributors, 30

2017-09-01

The aim of the Asteroid Science Intersections with In-Space Mine Engineering (ASIME) 2016 conference on September 21-22, 2016 in Luxembourg City was to provide an environment for the detailed discussion of the specific properties of asteroids, with the engineering needs of space missions that utilise asteroids. The ASIME 2016 Conference produced a layered record of discussions from the asteroid scientists and the asteroid miners to understand each other's key concerns and to address key scientific questions from the asteroid mining companies: Planetary Resources, Deep Space Industries and TransAstra. These Questions were the focus of the two-day conference, were addressed by scientists inside and outside of the ASIME 2016 Conference and were the focus of this White Paper. The answers in this White Paper point to the Science Knowledge Gaps (SKGs) for advancing the asteroid in-space resource utilisation domain.

Annual Fuze Conference (44th)

DTIC Science & Technology

2000-04-11

Untitled Document 44th Fuze Conference.html[6/8/ 2017 10:33:34 AM] Files are in Adobe Acrobat 3.0 format. 44th Annual Fuze Conference 11-12 April...United Kingdom Wednesday, April 12, 2000 Untitled Document 44th Fuze Conference.html[6/8/ 2017 10:33:34 AM] Rockwell Collins’ Artillery GPS Engine...cooperation with U.S experts Mitch Stone Texarkana , Texas Day & Zimmermann, Inc. - Lone Star Division We do what we say! þ History and Evolution þ

Modular protein domains: an engineering approach toward functional biomaterials.

PubMed

Lin, Charng-Yu; Liu, Julie C

2016-08-01

Protein domains and peptide sequences are a powerful tool for conferring specific functions to engineered biomaterials. Protein sequences with a wide variety of functionalities, including structure, bioactivity, protein-protein interactions, and stimuli responsiveness, have been identified, and advances in molecular biology continue to pinpoint new sequences. Protein domains can be combined to make recombinant proteins with multiple functionalities. The high fidelity of the protein translation machinery results in exquisite control over the sequence of recombinant proteins and the resulting properties of protein-based materials. In this review, we discuss protein domains and peptide sequences in the context of functional protein-based materials, composite materials, and their biological applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Improvement in the control aspect of laser frequency stabilization for SUNLITE project

NASA Technical Reports Server (NTRS)

Zia, Omar

1992-01-01

Flight Electronics Division of Langley Research Center is developing a spaceflight experiment called the Stanford University and NASA Laser In-Space Technology (SUNLITE). The objective of the project is to explore the fundamental limits on frequency stability using an FM laser locking technique on a Nd:YAG non-planar ring (free-running linewidth of 5 KHz) oscillator in the vibration free, microgravity environment of space. Compact and automated actively stabilized terahertz laser oscillators will operate in space with an expected linewidth of less than 3 Hz. To implement and verify this experiment, NASA engineers have designed and built a state of the art, space qualified high speed data acquisition system for measuring the linewidth and stability limits of a laser oscillator. In order to achieve greater stability and better performance, an active frequency control scheme requiring the use of a feedback control loop has been applied. In the summer of 1991, the application of control theory in active frequency control as a frequency stabilization technique was investigated. The results and findings were presented in 1992 at the American Control Conference in Chicago, and have been published in Conference Proceedings. The main focus was to seek further improvement in the overall performance of the system by replacing the analogue controller by a digital algorithm.

The fourth International Conference on Information Science and Cloud Computing

NASA Astrophysics Data System (ADS)

This book comprises the papers accepted by the fourth International Conference on Information Science and Cloud Computing (ISCC), which was held from 18-19 December, 2015 in Guangzhou, China. It has 70 papers divided into four parts. The first part focuses on Information Theory with 20 papers; the second part emphasizes Machine Learning also containing 21 papers; in the third part, there are 21 papers as well in the area of Control Science; and the last part with 8 papers is dedicated to Cloud Science. Each part can be used as an excellent reference by engineers, researchers and students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by the ISCC conference. Special thanks go to Professor Deyu Qi, General Chair of ISCC 2015, for his leadership in supervising the organization of the entire conference; Professor Tinghuai Ma, Program Chair, and members of program committee for evaluating all the submissions and ensuring the selection of only the highest quality papers; and the authors for sharing their ideas, results and insights. We sincerely hope that you enjoy reading papers included in this book.

Expedition 40 Press Conference

NASA Image and Video Library

2014-05-27

A reflection of the audience can been seen in the quarantine glass as Expedition 40 Flight Engineer Alexander Gerst of the European Space Agency, ESA, left, Soyuz Commander Maxim Suraev of the Russian Federal Space Agency, Roscosmos, center, and Flight Engineer Reid Wiseman of NASA, right, pose for a group picture at the conclusion of a press conference, Tuesday, May 27, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch May 29 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Special Section dedicated to the 11th International Conference on Vibration Problems (ICOVP-2013)

NASA Astrophysics Data System (ADS)

Dimitrovová, Zuzana; Gonçalves, Rodrigo

2015-01-01

This section contains the first set of selected papers from the 11th edition of the biennial International Conference series on Vibration Problems (ICOVP-2013), which was held at the Instituto Superior Técnico in Lisbon, Portugal, on 9-12 September 2013, and was jointly organized by the Civil Engineering Department of the Universidade Nova de Lisboa and the Institute of Mechanical Engineering at the Instituto Superior Técnico. A second set of papers will be included in a forthcoming issue.

Krakow conference on low emissions sources: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierce, B.L.; Butcher, T.A.

1995-12-31

The Krakow Conference on Low Emission Sources presented the information produced and analytical tools developed in the first phase of the Krakow Clean Fossil Fuels and Energy Efficiency Program. This phase included: field testing to provide quantitative data on missions and efficiencies as well as on opportunities for building energy conservation; engineering analysis to determine the costs of implementing pollution control; and incentives analysis to identify actions required to create a market for equipment, fuels, and services needed to reduce pollution. Collectively, these Proceedings contain reports that summarize the above phase one information, present the status of energy system managementmore » in Krakow, provide information on financing pollution control projects in Krakow and elsewhere, and highlight the capabilities and technologies of Polish and American companies that are working to reduce pollution from low emission sources. It is intended that the US reader will find in these Proceedings useful results and plans for control of pollution from low emission sources that are representative of heating systems in central and Eastern Europe. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less

Effect ofHydrogen Use on Diesel Engine Performance

NASA Astrophysics Data System (ADS)

Ceraat, A.; Pana, C.; Negurescu, N.; Nutu, C.; Mirica, I.; Fuiorescu, D.

2016-11-01

Necessity of pollutant emissions decreasing, a great interest aspect discussed at 2015 Paris Climate Conference, highlights the necessity of alternative fuels use at diesel engines. Hydrogen is considered a future fuel for the automotive industry due to its properties which define it as the cleanest fuel and due to the production unlimited sources. The use of hydrogen as fuel for diesel engines has a higher degree of complexity because of some hydrogen particularities which lead to specific issues of the hydrogen use at diesel engine: tendency of uncontrolled ignition with inlet backfire, in-cylinder combustion with higher heat release rates and with high NOx level, storage difficulties. Because hydrogen storing on vehicle board implies important difficulties in terms of safety and automotive range, the partial substitution of diesel fuel by hydrogen injected into the inlet manifold represents the most efficient method. The paper presents the results of the experimental researches carried on a truck diesel engine fuelled with diesel fuel and hydrogen, in-cylinder phenomena's study showing the influence of some parameters on combustion, engine performance and pollutant emissions. The paper novelty is defined by the hydrogen fuelling method applied to diesel engine and the efficient control of the engine running.

Advances in engineering science, volume 1

NASA Technical Reports Server (NTRS)

1976-01-01

Proceedings from a conference on engineering advances are presented, including materials science, fracture mechanics, and impact and vibration testing. The tensile strength and moisture transport of laminates are also discussed.

Women in biomedical engineering and health informatics and its impact on gender representation for accepted publications at IEEE EMBC 2007.

PubMed

McGregor, Carolyn; Smith, Kathleen P; Percival, Jennifer

2008-01-01

The study of women within the professions of Engineering and Computer Science has consistently been found to demonstrate women as a minority within these professions. However none of that previous work has assessed publication behaviours based on gender. This paper presents research findings on gender distribution of authors of accepted papers for the IEEE Engineering and Medicine Society annual conference for 2007 (EMBC '07) held in Lyon, France. This information is used to present a position statement of the current state of gender representation for conference publication within the domain of biomedical engineering and health informatics. Issues in data preparation resulting from the lack of inclusion of gender in information gathered from accepted authors are presented and discussed.

United States Air Force Graduate Student Research Program for 1990. Program Technical Report. Volume 1

DTIC Science & Technology

1991-06-05

functions on the excavator. 28-6 m0 E Figure 1: Conceptual User Interface for the Rapid Runway Repair (RRR) Remote Control System IV. COMMUNICATION SYSTEM...Vehicle Systems Conference, Dayton, OH. Mariani, D., 1988, "Robotic Vehicle Communications Interoperability," RD& E Center Technical Report, US Army Tank...D.g e : BS Va;,derbilt University Specialty: Computer Engineering Electrical Eng. Dept. Absigned: Arnold Er-gineering Nashville, TN 37240 Developmer

Proceedings of the Annual Conference on Manual Control (10th) held at Wright-Patterson AFB, Ohio on 9-11 April 1974

DTIC Science & Technology

1974-04-01

A Jh .*H-M,fcflTlt FUTURE TERMINAL AIR TRAFFIC MANAGEMENT CONCEPTS John G. Kreifeldt Department of Engineering Design Tufts University,Medford...wright-patterson afb,ohio Hair force institute of technology > air force flight dynamics laboratory 1 V& t \\ jfr£ Approved for public release...report should not be returned unless return is required by security considerationsi contractual obligations, or notice on a specific document. AIR

Chemical Engineering Curricula for the Future: Synopsis of Proceedings of a U.S.-India Conference, January, 1988.

ERIC Educational Resources Information Center

Ramkrishna, D.; And Others

1989-01-01

This is a summary of a seminar for changing the undergraduate chemical engineering curriculum in India. Identifies and describes biotechnology, materials for structural and microelectronic catalysis, and new separation processes as emerging areas. Evaluates the current curriculum, including basic science, engineering lore, chemical engineering,…

GE STEM Teacher's Conference

NASA Image and Video Library

2017-07-13

Teachers prepare to demonstrate the projects they built for the Rocketry Engineering Design Challenge during the 2017 GE Foundation High School STEM Integration Conference at the Center for Space Education at NASA's Kennedy Space Center. High school teachers from across the country took part in the week-long conference, which is designed to explore effective ways for teachers, schools and districts from across the country to integrate STEM throughout the curriculum. The conference is a partnership between GE Foundation and the National Science Teachers Association.

27th International Conference on CADCAM, Robotics and Factories of the Future 2014

NASA Astrophysics Data System (ADS)

Karamanoglu, Mehmet; Yang, Xin-She; Zivanovic, Aleksandar; Smith, Martin; Loureiro, Rui

2014-07-01

It is a great pleasure to welcome you to the 27th International Conference on CADCAM, Robotics and Factories of the Future, sponsored by the International Society for Productivity Enhancement, Middlesex University, Festo Limited GB, National Instruments UK & Ireland, the Sector Skills Council for Science, Engineering and Manufacturing Technologies and our proceedings publisher Institute of Physics Publications. This is the second time Middlesex University has played host to this longstanding international conference, last time being the 12th edition in 1996. The subject content of the conference remains current, focusing on cutting edge developments in research. The conference themes this year are divided into seven themes, Product Development and Sustainability, Modelling and Simulation, Automation, Robotics and Handling Systems, Advanced Quality Systems Tools and Quality Management, Human Aspects in Engineering Activities, Emerging Scenarios in Engineering Education and Training, and Emerging Technologies in Factories of the Future. The conference is organised into seven sessions running in parallel over three days, providing a platform to speakers from 16 different countries. The programme also features four eminent keynote speakers and a hands-on workshop organised by National Instruments. Organising an event such as this would not be possible without the help of many colleagues. I am grateful to the members of the Organising Committee, the International Scientific Committee, our sponsors and all those colleagues who helped in the review of many abstracts and consequently full papers. This required meticulous attention to detail and strict adherence to very tight deadlines. However large or small a conference is, the effort required to make the local arrangements work for all is not insignificant. The conference organisers acknowledge the particular efforts of Miss Mita Vaghi in providing her expertise in event management and her diligent support and Anete Ashton of IoP Publications for her guidance and help in producing the conference proceedings and online listing. The organisers also recognise the support provided by our sponsors and in particular to Richard Roberts and David Baker from National Instruments, Babak Jahanbani and Phil Holmes from Festo Ltd. Their continued support over the course of the planning period and also during the event itself is very much appreciated. We are also indebted to all the contributors to the conference, particularly the researchers, and practitioners. Professor Mehmet Karamanoglu Conference Chair Further details, including keynote speakers and committees, are available in the PDF

10 CFR 851.27 - Reference sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

....nfpa.org. (v) American Conference of Governmental Industrial Hygienist (ACGIH), 1330 Kemper Meadow...) American Society of Mechanical Engineers (ASME), P.O. Box 2300 Fairfield, NJ 07007. Telephone: 800-843-2763...) American Conference of Governmental Industrial Hygienists, “Threshold Limit Values for Chemical Substances...

Expedition 6 Press Conference

NASA Image and Video Library

2003-05-05

Expedition 6 Flight Engineer Nikolai Budarin, left, Commander Ken Bowersox and International Space Station Science Officer Don Pettit, right, pose for photos at a press conference at the Gagarin Cosmonaut Training Center in Star City, Russia, Thursday, May 6, 2003. Photo Credit: (NASA/Bill Ingalls)

Expedition 6 Press Conference

NASA Image and Video Library

2003-05-05

Expedition 6 Flight Engineer Nikolai Budarin, left, Commander Ken Bowersox and NASA International Space Station Science Officer Don Pettit, right, answer questions during a press conference at the Gagarin Cosmonaut Training Center in Star City, Russia, Thursday, May 6, 2003. Photo Credit: (NASA/Bill Ingalls)

Expedition 19 Press Conference

NASA Image and Video Library

2009-03-24

Spaceflight Participant Charles Simonyi, left, Expedition 19 Commander Gennady I. Padalka, center, and Flight Engineer Michael R. Barratt answer questions from behind glass during a press conference on Wednesday, March 25, 2009 at the Cosmonaut Hotel in Baikonur, Kazakhstan. Photo Credit: (NASA/Bill Ingalls)

Continuing Engineering Studies Series; Monograph No. 3.

ERIC Educational Resources Information Center

American Society for Engineering Education, Washington, DC.

Interest in continuing engineering studies has been growing within the American Society for Engineering Education as well as among educational institutions, industrial organizations, professional association, and governmental agencies. Feeling a national need for uniformity, in 1968 the National Planning Conference authorized a National Task Force…

IECON '87: Industrial applications of control and simulation; Proceedings of the 1987 International Conference on Industrial Electronics, Control, and Instrumentation, Cambridge, MA, Nov. 3, 4, 1987

NASA Technical Reports Server (NTRS)

Hartley, Tom T. (Editor)

1987-01-01

Recent advances in control-system design and simulation are discussed in reviews and reports. Among the topics considered are fast algorithms for generating near-optimal binary decision programs, trajectory control of robot manipulators with compensation of load effects via a six-axis force sensor, matrix integrators for real-time simulation, a high-level control language for an autonomous land vehicle, and a practical engineering design method for stable model-reference adaptive systems. Also addressed are the identification and control of flexible-limb robots with unknown loads, adaptive control and robust adaptive control for manipulators with feedforward compensation, adaptive pole-placement controllers with predictive action, variable-structure strategies for motion control, and digital signal-processor-based variable-structure controls.

Advances in cryogenic engineering. Volume 27 - Proceedings of the Cryogenic Engineering Conference, San Diego, CA, August 11-14, 1981

NASA Technical Reports Server (NTRS)

Fast, R. W. (Editor)

1982-01-01

Applications of superconductivity are considered, taking into account MHD and fusion, generators, transformers, transmission lines, magnets for physics, cryogenic techniques, electrtronics, and aspects of magnet stability. Advances related to heat transfer in He I are discussed along with subjects related to theat transfer in He II, refrigeration of superconducting systems, refrigeration and liquefaction, dilution and magnetic refrigerators, refrigerators for space applications, mass transfer and flow phenomena, and the properties of fluids. Developments related to cryogenic applications are also explored, giving attention to bulk storage and transfer of cryogenic fluids, liquefied natural gas operations, space science and technology, and cryopumping. Topics related to cryogenic instrumentation and controls include the production and use of high grade silicon diode temperature sensors, the choice of strain gages for use in a large superconducting alternator, microprocessor control of cryogenic pressure, and instrumentation, data acquisition and reduction for a large spaceborne helium dewar.

KSC-2009-1800

NASA Image and Video Library

2009-02-20

CAPE CANAVERAL, Fla. – Mike Curie (far left), with NASA Public Affairs, moderates the flight readiness review news conference for space shuttle Discovery's STS-119 mission. On the panel are (from left) Associate Administrator for Space Operations Bill Gerstenmaier, Space Shuttle Program Manager John Shannon and Space Shuttle Launch Director Mike Leinbach. During a thorough review of Discovery's readiness for flight, NASA managers decided Feb. 20 more data and possible testing are required before proceeding to launch. Engineering teams have been working to identify what caused damage to a flow control valve on shuttle Endeavour during its November 2008 flight. A new launch date has not been determined. NASA managers decided Feb. 20 more data and possible testing are required before proceeding to launch. Engineering teams have been working to identify what caused damage to a flow control valve on shuttle Endeavour during its November 2008 flight. A new launch date has not been determined. Photo credit: NASA/Glenn Benson

From expert data collectors to interventionists: changing the focus for infection control professionals.

PubMed

Murphy, Denise M

2002-04-01

The current economic and political environments challenge health care organizations in the United States to provide affordable, accessible, and comprehensive health services. However, changes in reimbursement to health care providers can affect their ability to offer access to cutting-edge services while reducing costs. Consequently, organizations are restructuring, re-engineering, right-sizing, downsizing, and redesigning, all in an effort to save money while also hoping to maintain a reputation for quality and customer service. Dr Vicky Fraser, in her keynote address at the APIC conference in 2000, reminded us that ICHE programs are cost centers rather than revenue generators, and are often targets for budget cuts. Although Haley's Study on the Efficacy of Nosocomial Infection Control (SENIC), published in 1985, was a landmark event demonstrating the importance of our profession's mission, it is becoming dated. Infection control professionals (ICPs) must continue Haley's work, finding innovative ways to market or demonstrate the value of ICHE programs to health care executives. Closing the 1999 APIC conference with a symposium entitled "Breaking Out of the Box," Jackson and Massanari challenged ICPs to educate themselves about the changing health care environment, to be proactive, and constructively help organizations "re-engineer" more efficiently, rather than feel victimized and helplessly await being re-engineered out of existence. The threat of downsizing prompted ICPs at BJC HealthCare to realize that the time had come to change their own culture and attitudes and to focus on the business of infection control. This change required challenging the traditional roles of solo practitioner, data collector, and keeper of infection control data and knowledge. The goals now include leading intervention teams committed to reducing health care-associated infections, partnering rather than accepting sole responsibility for lowering infection rates, and learning to influence without authority. Staying focused on quality and cost-effectiveness and demonstrating improvements in clinical outcomes became a commitment. This article discusses BJC HealthCare's journey through change so that it may provide useful information and tools for ICPs in any setting looking for the necessary change strategies that might keep them in business.

Selected Papers and Presentations Presented at MODSIM World 2010 Conference and Expo. Part 1

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E. (Editor)

2011-01-01

MODSIM World 2010 was held in Hampton, Virginia, October 13-15, 2010. The theme of the 2010 conference & expo was "21st Century Decision-Making: The Art of Modeling& Simulation". The conference program consisted of seven technical tracks - Defense, Engineering and Science, Health & Medicine, Homeland Security & First Responders, The Human Dimension, K-20 STEM Education, and Serious Games & Virtual Worlds. Selected papers and presentations from MODSIM World 2010 Conference & Expo are contained in this NASA Conference Publication (CP). Section 8.0 of this CP contains papers from MODSIM World 2009 Conference & Expo that were unavailable at the time of publication of NASA/CP-2010-216205 Selected Papers Presented at MODSIM World 2009 Conference and Expo, March 2010.

Selected Papers and Presentations Presented at MODSIM World 2010 Conference Expo. Part 2

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E. (Editor)

2011-01-01

MODSIM World 2010 was held in Hampton, Virginia, October 13-15, 2010. The theme of the 2010 conference & expo was "21st Century Decision-Making: The Art of Modeling& Simulation". The conference program consisted of seven technical tracks - Defense, Engineering and Science, Health & Medicine, Homeland Security & First Responders, The Human Dimension, K-20 STEM Education, and Serious Games & Virtual Worlds. Selected papers and presentations from MODSIM World 2010 Conference & Expo are contained in this NASA Conference Publication (CP). Section 8.0 of this CP contains papers from MODSIM World 2009 Conference & Expo that were unavailable at the time of publication of NASA/CP-2010-216205 Selected Papers Presented at MODSIM World 2009 Conference and Expo, March 2010.

IEEE Conference Publications in Libraries.

ERIC Educational Resources Information Center

Johnson, Karl E.

1984-01-01

Conclusions of surveys (63 libraries, OCLC database, University of Rhode Island users) assessing handling of Institute of Electrical and Electronics Engineers (IEEE) conference publications indicate that most libraries fully catalog these publications using LC cataloging, and library patrons frequently require series access to publications. Eight…

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Parimal Kopardekar, NASA Ames Senior Engineer for Ait Transportation Systems gave an overview of UTM (Left).

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Parimal Kopardekar, NASA Ames Senior Engineer for Ait Transportation Systems gave an overview of UTM.

5 CFR 2640.203 - Miscellaneous exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... his position as a tenured Professor of Engineering at the University of California (UC) at Berkeley... professor in the School of Engineering at one campus of a State university. The SGE may participate in... him to attend a conference sponsored by the Engineering Institute of America. However, the employee...

Fibre Concrete 2017

NASA Astrophysics Data System (ADS)

2017-09-01

9th international conference on fibre reinforced concretes (FRC), textile reinforced concretes (TRC) and ultra-high performance concretes (UHPC) Preface The Fibre Concrete Conference series is held biennially to provide a platform to share knowledge on fibre reinforced concretes, textile concretes and ultra-high performance concretes regarding material properties and behaviour, technology procedures, topics of long-term behaviour, creep, durability; sustainable aspects of concrete including utilisation of waste materials in concrete production and recycling of concrete. The tradition of Fibre Concrete Conferences started in eighties of the last century. Nowadays the conference is organized by the Department of Concrete and Masonry Structures of the Czech Technical University in Prague, Faculty of Civil Engineering. The 9th International Conference Fibre Concrete 2017 had 109 participants from 27 countries all over the world. 55 papers were presented including keynote lectures of Professor Bažant, Professor Bartoš and Dr. Broukalová. The conference program covered wide range of topics from scientific research to practical applications. The presented contributions related to performance and behaviour of cement based composites, their long-term behaviour and durability, sustainable aspects, advanced analyses of structures from these composites and successful applications. This conference was organized also to honour Professor Zděnek P. Bažant on the occasion of his jubilee and to appreciate his merits and discoveries in the field of fibre reinforced composites, structural mechanics and engineering.

The IMPELA TM 10 MeV, 50 kW electron linac: launching an industrial accelerator product

NASA Astrophysics Data System (ADS)

Stirling, Andrew J.

1991-05-01

In the previous conferences there has been no shortage of ideas, experiments and prototypes for industrial accelerators. Indeed, physicists propose new ideas at a rate faster than industry can get irradiators to the market. Certainly, the basic physics design must be sound, but this is a far from sufficient condition for an accelerator to succeed. Good physics design is needed to provide a good combination of electrical efficiency and useable power within the scan width. It may, however, be counterproductive if high performance compromises inherent reliability. From the engineering discipline is required an engineered control interface, an engineered product control and dosimetry system and traceable quality assurance. Just as important, the industrial client seeks an irradiator that is built quickly, and will be supported over a long service life (10-20 years). It is also necessary to assist the client in facility design, licencing and process verification. Providing these additional functions is a challenge for the business champions which equals what the technical champions face in obtaining full beam power.

Missile Manufacturing Technology Conference Held at Hilton Head Island, South Carolina on 22-26 September 1975. Panel Presentations. Test Equipment

DTIC Science & Technology

1975-01-01

in the computer in 16 bit parallel computer DIO transfers at the max- imum computer I/O speed. it then transmits this data in a bit- serial echo...maximum DIO rate under computer interrupt control. The LCI also provides station interrupt information for transfer to the computer under computer...been in daily operation since 1973. The SAM-D Missile system is currently in the Engineering De - velopment phase which precedes the Production and

AAAIC '88 - Aerospace Applications of Artificial Intelligence; Proceedings of the Fourth Annual Conference, Dayton, OH, Oct. 25-27, 1988. Volumes 1 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J.R.; Netrologic, Inc., San Diego, CA)

1988-01-01

Topics presented include integrating neural networks and expert systems, neural networks and signal processing, machine learning, cognition and avionics applications, artificial intelligence and man-machine interface issues, real time expert systems, artificial intelligence, and engineering applications. Also considered are advanced problem solving techniques, combinational optimization for scheduling and resource control, data fusion/sensor fusion, back propagation with momentum, shared weights and recurrency, automatic target recognition, cybernetics, optical neural networks.

Advances in Tissue Regeneration

DTIC Science & Technology

2010-01-01

Conference Hand Transplants Face transplants Skin Graft Stretching 33 www.afirm.mil Josh Maloney 1st AFIRM Hand Transplant 2010 MHS Conference...34www.afirm.mil Cell spraying in place of skin grafting for burn AFIRM: clinical trials scheduled for FY 10 2010 MHS Conference Before After patients...ReCell) Using Extracellular matrix to regrow lost muscle tissue. Weeks 6 & 7 Week 9 Week 8 Week 10 Week 11 Autologous engineered skin grafts Not

Operational Resiliency Management: An Introduction to the Resiliency Engineering Framework

DTIC Science & Technology

2006-09-20

Maturity Model Integration (CMMI) . 5 © 2006 Carnegie Mellon University y FRB Bus Con Conference 2006 Managing Today’s Operational Risk Challenges ...Bus Con Conference 2006 A model is needed to. . . Identify and prioritize risk exposures Define a process improvement roadmap Measure and facilitate...University y FRB Bus Con Conference 2006 Why use a “model” approach? Provides an operational risk roadmap Vendor-neutral, standardized, unbiased

4th International Plant Biomechanics Conference Proceedings (Abstracts)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frank W. Telewski; Lothar H. Koehler; Frank W. Ewers

2003-07-20

The 4th International Plant Biomechanics Conference facilitated an interdisciplinary exchange between scientists, engineers, and educators addressing the major questions encountered in the field of Plant Biomechanics. Subjects covered by the conference include: Evolution; Ecology; Mechanoreception; Cell Walls; Genetic Modification; Applied Biomechanics of Whole Plants, Plant Products, Fibers & Composites; Fluid Dynamics; Wood & Trees; Fracture Mechanics; Xylem Pressure & Water Transport; Modeling; and Introducing Plant Biomechanics in Secondary School Education.

Proceedings of the 2013 International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering - M and C 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2013-07-01

The Mathematics and Computation Division of the American Nuclear (ANS) and the Idaho Section of the ANS hosted the 2013 International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M and C 2013). This proceedings contains over 250 full papers with topics ranging from reactor physics; radiation transport; materials science; nuclear fuels; core performance and optimization; reactor systems and safety; fluid dynamics; medical applications; analytical and numerical methods; algorithms for advanced architectures; and validation verification, and uncertainty quantification.

Expedition 40 Press Conference

NASA Image and Video Library

2014-05-27

Expedition 40 Soyuz Commander Maxim Suraev of the Russian Federal Space Agency, Roscosmos, center, takes a picture with his cell phone during a press conference, Tuesday, May 27, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. Expedition 40 Soyuz Commander Maxim Suraev of the Russian Federal Space Agency, Roscosmos, Flight Engineer Alexander Gerst of the European Space Agency, ESA, and Flight Engineer Reid Wiseman of NASA will launch aboard their Soyuz TMA-13M spacecraft on their mission to the International Space Station in the early hours of May 29. Photo Credit: (NASA/Joel Kowsky)

Nomenclature for Aeronautics

NASA Technical Reports Server (NTRS)

1927-01-01

This nomenclature for aeronautics was prepared by a Special Conference on Aeronautical Nomenclature by the executive committee of the National Advisory Committee for Aeronautics at a meeting held on August 19, 1924, at which meeting Dr. Joseph S. Ames was appointed chairman of the conference. The conference was composed of representatives of the National Advisory Committee for Aeronautics and specially appointed representatives officially designated by the Army Air Service, the Bureau of Aeronautics of the Navy Department, the Bureau of Standards, the American Society of Mechanical Engineers, the Society of Automotive Engineers, and the Aeronautical Chamber of Commerce. The purpose of the committee in the preparation and publication of this report is to secure uniformity in the official documents of the government and, as far as possible, in technical and other commercial publications

Physics and Process Modeling (PPM) and Other Propulsion R and T. Volume 1; Materials Processing, Characterization, and Modeling; Lifting Models

NASA Technical Reports Server (NTRS)

1997-01-01

This CP contains the extended abstracts and presentation figures of 36 papers presented at the PPM and Other Propulsion R&T Conference. The focus of the research described in these presentations is on materials and structures technologies that are parts of the various projects within the NASA Aeronautics Propulsion Systems Research and Technology Base Program. These projects include Physics and Process Modeling; Smart, Green Engine; Fast, Quiet Engine; High Temperature Engine Materials Program; and Hybrid Hyperspeed Propulsion. Also presented were research results from the Rotorcraft Systems Program and work supported by the NASA Lewis Director's Discretionary Fund. Authors from NASA Lewis Research Center, industry, and universities conducted research in the following areas: material processing, material characterization, modeling, life, applied life models, design techniques, vibration control, mechanical components, and tribology. Key issues, research accomplishments, and future directions are summarized in this publication.

Engineered elastomeric proteins with dual elasticity can be controlled by a molecular regulator.

PubMed

Cao, Yi; Li, Hongbin

2008-08-01

Elastomeric proteins are molecular springs that confer excellent mechanical properties to many biological tissues and biomaterials. Depending on the role performed by the tissue or biomaterial, elastomeric proteins can behave as molecular springs or shock absorbers. Here we combine single-molecule atomic force microscopy and protein engineering techniques to create elastomeric proteins that can switch between two distinct types of mechanical behaviour in response to the binding of a molecular regulator. The proteins are mechanically labile by design and behave as entropic springs with an elasticity that is governed by their configurational entropy. However, when a molecular regulator binds to the protein, it switches into a mechanically stable state and can act as a shock absorber. These engineered proteins effectively mimic and combine the two extreme forms of elastic behaviour found in natural elastomeric proteins, and thus represent a new type of smart nanomaterial that will find potential applications in nanomechanics and material sciences.

Electronic Warfare / Electronic Protection (EW/EP) S&T Priority Steering Council

DTIC Science & Technology

2011-11-08

Office Office of the Assistant Secretary of Defense (Research and Engineering) NDIA 8th Annual Disruptive Technologies Conference 8 November 2011...the NDIA Disruptive Technologies Conference, November 8, 2011 Washington, DC 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17

76 FR 66735 - Announcement of Requirements and Registration for the NIBIB DEsign by Biomedical Undergraduate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

...., implants, biomaterials, surgical tools, tissue engineering, drug and gene delivery; (c) Technology to Aid... health information, and other programs with respect to biomedical imaging and engineering and associated... ceremony: October 2012, Biomedical Engineering Society Conference (exact date to be determined). FOR...

78 FR 5469 - Announcement of Requirements and Registration for the 2013 NIBIB DEsign by Biomedical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... tools, tissue engineering, drug and gene delivery (c) Technology to Aid Underserved Populations and... and engineering and associated technologies and modalities with biomedical applications; and (3) to...: September 2013, Biomedical Engineering Society Conference (exact date to be announced at http://debut2013...

Current Trends in Aerospace Engineering Education on Taiwan.

ERIC Educational Resources Information Center

Hsieh, Sheng-Jii

A proposal for current trends in Aerospace Engineering Education on Taiwan has been drawn from the suggestions made after a national conference of "Workshop on Aerospace Engineering Education Reform." This workshop was held in January 18-20, 1998, at the Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan,…

Science and Engineering Programs: On Target for Women?

ERIC Educational Resources Information Center

Matyas, Marsha Lakes, Ed.; Dix, Linda Skidmore, Ed.

To increase women's participation in science and engineering, many barriers must be overcome. This book, an outcome of a conference held by the National Research Council's Committee on Women in Science and Engineering, summarizes presentations of many experts and presents information on specific strategies for increasing the participation of women…

Biotechnology Conference: Protein Engineering Held in Oxford, United Kingdom on 5-8 April 1987.

DTIC Science & Technology

1987-07-27

engineered by protein engineering was reported by J. new variants which are now being checked. Brange (Novo Research Institute, Bags- Studies of a cassette...to Brange . Therefore, multidomain protein consisting of five Brange and his group applied protein en- putative domains: the fribonectin finger

2017 The 7th International Conference on Computer Engineering and Networks

NASA Astrophysics Data System (ADS)

This conference proceeding is a collection of the papers accepted by the CENet 2017 - the 7th International Conference on Computer Engineering and Networks held on Shanghai from 22-23 July, 2017. This proceeding contains the five parts: Part I focuses on Machine learning (21 papers); Part II Wireless communication (21 papers); Part III Information theory (21 papers), Part IV Cloud science (14 papers) and Part V Data analysis (21 papers). Each part can be used as an excellent reference by industry practitioners, university faculty, and undergraduate as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity Thanks go to the authors for their hard work and dedication as well as the reviewers for ensuring the selection of only the highest quality papers; their efforts made this proceedings possible.

International Conference on Rehabilitation Engineering: Proceedings (2nd, Ottawa, Canada, June 17-22, 1984). Combined with RESNA 7th Annual Conference. Volume 4 = Conference internationale sur la technologie de reeducation fonctionnelle: compet rendu (2nd, Ottawa, Canada, Juin 17-22, 1984). Tenue parallelement a la RESNA 7e conference annuelle.

ERIC Educational Resources Information Center

Rehabilitation Engineering Society of North America, Washington, DC.

These proceedings contain 271 papers in English and 15 in French, representing research and development efforts in 19 countries. On the topic of wheelchairs, 28 papers address their design, performance, evaluation, and fabrication. The field of prosthetics and orthotics is represented by 33 papers discussing devices for upper extremities, lower…

PREFACE: IX International Conference on Modern Techniques of Plasma Diagnostics and their Application

NASA Astrophysics Data System (ADS)

Savjolov, A. S.; Dodulad, E. I.

2016-01-01

The IX Conference on ''Modern Techniques of Plasma Diagnosis and their Application'' was held on 5 - 7 November, 2014 at National Research Nuclear University MEPhI (NRNU MEPhI). The goal of the conference was an exchange of information on both high-temperature and low-temperature plasma diagnostics as well as deliberation and analysis of various diagnostic techniques and their applicability in science, industry, ecology, medicine and other fields. The Conference also provided young scientists from scientific centres and universities engaged in plasma diagnostics with an opportunity to attend the lectures given by the leading specialists in this field as well as present their own results and findings. The first workshop titled ''Modern problems of plasma diagnostics and their application for control of chemicals and the environment'' took place at Moscow Engineering and Physics Institute (MEPhI) in June 1998 with the support of the Section on Diagnostics of the Council of Russian Academic of Science on Plasma Physics and since then these forums have been held at MEPhI every two years. In 2008 the workshop was assigned a conference status. More than 150 specialists on plasma diagnostics and students took part in the last conference. They represented leading Russian scientific centres (such as Troitsk Institute of Innovative and Thermonuclear Research, National Research Centre ''Kurchatov Institute'', Russian Federal Nuclear Centre - All-Russian Scientific Research Institute of Experimental Physics and others) and universities from Belarus, Ukraine, Germany, USA, Belgium and Sweden. About 30 reports were made by young researchers, students and post-graduate students. All presentations during the conference were broadcasted online over the internet with viewers in Moscow, Prague, St. Petersburgh and other cities. The Conference was held within the framework of the Centre of Plasma, Laser Research and Technology supported by MEPhI Academic Excellence Project (Russian Ministry of Education and Science contract 02.•03.21.0005 of August 27th 2013). Papers selected by the Program Committee for publishing were reviewed under control of invited editors Prof. Andrey Kukushkin, Dr. Sci. Alexander Kukushkin, Dr. Sci. Elena Baronova, Dr. Emil Dodulad. We would like to thank heartily all of the speakers, participants and organizing committee members for their contribution to the conference

PREFACE: International Conference on Fundamentals and Applications of HIPIMS

NASA Astrophysics Data System (ADS)

Ehiasarian, Arutiun; Bandorf, Ralf

2012-09-01

Thin film technology and surface engineering are nowadays key components for numerous innovative products like efficient windows, flat screens, sensors or hard coatings used in tool coating and automotive applications, as well as products for everyday life. In line with the demands of surface technology, coating technology is also evolving and improving. The latest major technology jump was the introduction of pulse technology in physical vapor deposition. High power impulse magnetron sputtering is the most recent development of pulse sputtering. After approximately a decade of intense academic investigation and development we observe today a transfer of this new technology towards industrial processes. As well as several international activities the international conference on fundamentals and applications of HIPIMS continues the success story of the HIPIMS days, initiated in 2004 at Sheffield Hallam University, UK. Becoming the only international conference especially dedicated to HIPIMS the HIPIMS conference is a venue for industrial and academic exchange on the latest developments in this fast evolving new technology. As a joint undertaking of Sheffield Hallam University SHU, Network of Competence for Industrial Plasma Surface Technology INPLAS and Fraunhofer Institute for Surface Engineering and Thin Films IST the HIPIMS conference was launched in 2010 in Sheffield, UK. With 120 delegates the impact of the new conference was underlined. The growing importance of HIPIMS technology was connected with a growth by nearly 35% to 160 participants in 2011 at the second HIPIMS conference in Braunschweig, DE. The participants were made up of equal numbers from research and development (university and research institutes) and industry. Being a global conference representatives from 25 different countries from all continents attended. The HIPIMS conference is also in joint collaboration with the COST Action MP0804 Highly Ionized Pulse Plasma Processes (www.hipp-cost.eu). COST (European Cooperation in Science and Technology) is one of the longest-running European frameworks supporting cooperation among scientists and researchers across Europe (www.cost.eu). The COST Action MP0804 HIPP processes focuses on the fundamentals and the industrial implementation of highly ionized pulse plasmas, where HIPIMS is the most prominent and most mature technology, today. Over 50 high level contributions, divided in 37 oral and 14 poster presentations were highly appreciated by the professional audience. The message from 2011 was that HIPIMS technology has now reached industry. In the opening session of the conference representatives from different companies reported on the latest developments in industrialization. Using HIPIMS technology, the lifetime of mills using a state of the art coating can be extended by 50%. Comparable deposition rates for coating cutting inserts on the different faces are reported. The ice-free window for automotive application is one solution just becoming available by HIPIMS technology. The talks from international experts covered a range from fundamental physics, experimental investigations, theoretically modeling to several applications and made the international conference on fundamentals and applications a success story to be continued in the following years. Arutiun Ehiasarian and Ralf Bandorf (Conference Chairmen of HIPIMS 2010 and 2011, respectively) Organising Committee (2010 and 2011) - Affiliations Professor Dr Papken Hovsepian (Sheffield Hallam University, Nanotechnology Center for PVD Research, UK) Professor Dr Günter Bräuer (Fraunhofer Institute for Surface Engineering and Thin Films IST/ Network of Competence INPLAS, Braunschweig, DE) Professor Dr Arutiun P. Ehiasarian (Sheffield Hallam University, Materials Research Institute, UK) Dr Ralf Bandorf (Fraunhofer Institute for Surface Engineering and Thin Films IST, Braunschweig, DE) Main Sponsor Society of Vacuum Coaters SVC Albuquerque, New Mexico, USA Sponsors Ionbond Netherlands BV Venlo, NL Hauzer Techno Coating BV Venlo, NL Hüttinger Elektronik GmbH + Co. KG Freiburg, DE Conference Photos Conference photograph Attendees HIPIMS Conference 2010, Sheffield, UK Conference photograph Attendees HIPIMS Conference 2011, Braunschweig, Germany

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 flight engineer Oleg Artemyev is seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

FASTSim Publications | Transportation Research | NREL

Science.gov Websites

Applications Authors: K. Genikomsakis and G. Mitrentsis Journal: Transportation Research Part D: Transport and Vehicles for Better Greenhouse Gas Reduction Authors: K. Hamza and K. Laberteaux Conference: ASME Design Engineering Technical Conference (August 2016) Optimal Design and Techno-Economic Analysis of a Hybrid Solar

Analysis of a STEM Education Professional Development Conference for Pre-Service Educators

ERIC Educational Resources Information Center

Hardrict-Ewing, Gloria

2017-01-01

Science, technology, engineering, and mathematics (STEM) disciplines are attracting increased attention in education. The iSTEM 2017 conference was a professional development program designed to acquaint pre-service teachers with interdisciplinary, research-based STEM instructional strategies that can transform traditional classroom instruction…

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Joseph Rios, NASA Ames Aerospace Engineer and UTM Technical Lead, describes the purpose of the test and flight scenarios.

PREFACE: 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Ayadi, Zoubir; Czerwiec, Thierry; Horwat, David; Jamart, Brigitte

2009-07-01

This issue of IOP Conference Series: Materials Science and Engineering, contains manuscripts of talks that will be presented at the 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research that will be held at the Ecole Européenne d'Ingénieurs en Génie des Matériaux - European School of Materials Science and Engineering (EEIGM) in Nancy on November 4-5 2009. The conference will be organized by the EEIGM. The aim of the conference is to bring together scientists from the six European universities involved in the EEIGM and in the ''Erasmus Mundus'' AMASE Master (Advanced Materials Science and Engineering) programmes and in the Tempus FORGEMAT European project: Nancy-Université - EEIGM/INPL (Nancy, France), Universität des Saarlandes (Saarbrücken, Germany), Universitat Politècnica de Catalunya - ETSEIB (Barcelona, Spain), Luleå Tekniska Universitet (Luleå, Sweden), Universidad Politecnica de Valencia - ETSII (Valencia, Spain) and AGH University of Science and Technology, (Kralow, Poland). This conference is also open to other universities who have strong links with the EEIGM and it will provide a forum for exchange of ideas, cooperation and future directions by means of regular presentations, posters and a round-table discussion. After careful refereeing of all manuscripts, equally shared between the four editors, 26 papers have been selected for publication in this issue. The papers are grouped together into different subject categories: polymers, metallurgy, ceramics, composites and nanocomposites, simulation and characterization. The editors would like to take this opportunity to thank all the participants who submitted their manuscripts during the conference and responded in time to the editors' request at every stage from reviewing to final acceptance. The editors are indebted to all the reviewers for painstakingly reviewing the papers at very short notice. Special thanks are called for the sponsors of the conference including EEIGM-INPL, Grand Nancy, Ville de Nancy, Region Lorraine, Université Franco-Allemande and Institut Jean Lamour. Proceedings Editors: Zoubir Ayadi, Thierry Czerwiec, David Horwat and Brigitte Jamart

(Limiting the greenhouse effect)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rayner, S.

1991-01-07

Traveler attended the Dahlem Research Conference organized by the Freien Universitat, Berlin. The subject of the conference was Limiting the Greenhouse Effect: Options for Controlling Atmospheric CO{sub 2} Accumulation. Like all Dahlem workshops, this was a meeting of scientific experts, although the disciplines represented were broader than usual, ranging across anthropology, economics, international relations, forestry, engineering, and atmospheric chemistry. Participation by scientists from developing countries was limited. The conference was divided into four multidisciplinary working groups. Traveler acted as moderator for Group 3 which examined the question What knowledge is required to tackle the principal social and institutional barriers tomore » reducing CO{sub 2} emissions'' The working rapporteur was Jesse Ausubel of Rockefeller University. Other working groups examined the economic costs, benefits, and technical feasibility of options to reduce emissions per unit of energy service; the options for reducing energy use per unit of GNP; and the significant of linkage between strategies to reduce CO{sub 2} emissions and other goals. Draft reports of the working groups are appended. Overall, the conference identified a number of important research needs in all four areas. It may prove particularly important in bringing the social and institutional research needs relevant to climate change closer to the forefront of the scientific and policy communities than hitherto.« less

NREL: SMARTS - SMARTS References

Science.gov Websites

Improve Concentrating Photovoltaic System Design & Performance Evaluation." Proceedings of the 29th Institute of Electrical and Electronics Engineers Photovoltaic Specialists Conference. New Orleans Irradiance Reference Standards for Photovoltaic Performance." Journal of Solar Energy Engineering (126

UPEC `94 review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, T.J.

1995-02-01

The twenty-ninth Universities Power Engineering Conference (UPEC `94), held September 14--16, 1994, at University College, Galway, Ireland, surpassed all previous meetings in respect of number and quality of technical content of the papers and number of delegates attending. As in the past, it had a broad theme, covering all aspects of electrical power engineering, and was attended by academics, research workers, and members of the power service and manufacturing organizations. During the sessions, 265 papers from more than 30 countries were debated. There were 27 technical sessions, 3 poster sessions, and an opening and a closing session, 160 papers beingmore » presented orally in four groups of parallel sessions, the remainder being presented in poster sessions. The high standard of the papers, presentations, and technical discussions was particularly gratifying. The Universities Power Engineering Conference, held annually, provides a forum for the exchange of ideas among practicing engineers from the universities, consultants, and in the manufacturing and supply industries.« less

Building Careers, Transforming Institutions: Underrepresented Women and Minorities, Leadership Opportunities, and Interinstitutional Networking

NASA Astrophysics Data System (ADS)

Niemeier, D. A.; Smith, Vicki

Transforming universities does not occur exclusively as a result of the actions of current university leaders but additionally requires the collective efforts of women who are interested in mobility and opportunity for women across the board, and who are committed to changing the broad work environment for women in the academy. In engineering, the representation of women in mid-career and senior-level faculty positions remains very low, with even fewer women assuming leadership positions such as department chair or research center director. In this article, we examine outcomes of the National Science Foundation sponsored 1st Women in Engineering Leadership Conference in the fall of 2000. The conference was designed to enable women engineers to develop the types of network that can facilitate transition to leadership positions. With an analysis of data gathered from surveys at three points in time, we track the issues that were salient to women who were considering leadership roles (both obstacles to and aspirations for); identify the benefits accrued from participation in the conference and from subsequent networking activities; and propose future interventions that may enhance and promote interinstitutional networking.

2011 Superconductivity Centennial Conference - EUCAS-ISEC-ICMC

NASA Astrophysics Data System (ADS)

Rogalla, Horst

2012-11-01

In 2011 a Centennial Conference was organized in the "World Forum" Conference Center in Den Haag, the Netherlands, celebrating the discovery of Superconductivity by Heike Kamerlingh Onnes and his group 100 years ago in Leiden in the Netherlands. They found superconductivity in pure mercury after successfully liquefying helium for which Kamerlingh Onnes received a Nobel Prize in 1913. Since then superconductivity has been in the vivid focus of fundamental solid state physics, applied sciences and engineering in a very active community which already in 2005 came forward with the request to organize a Centennial Conference. Horst Rogalla and Dick Veldhuis from the University of Twente and Peter Kes from the University of Leiden took over the task to organize this conference in cooperation with three international conferences, the European Conference on Applied Superconductivity (EUCAS), the International Superconducting Electronics Conference (ISEC) and the International Cryogenic Materials Conference (ICMC). All three are biannual conferences with quite a long history in superconductivity, its applications and its materials.

Google Moon Press Conference

NASA Image and Video Library

2009-07-19

Brian McLendon, VP of Engineering, Google, Inc., speaks during a press conference, Monday, July 20, 2009, announcing the launch of Moon in Google Earth, an immersive 3D atlas of the Moon, accessible within Google Earth 5.0, Monday, July 20, 2009, at the Newseum in Washington. Photo Credit: (NASA/Bill Ingalls)

Google Moon Press Conference

NASA Image and Video Library

2009-07-19

Alan Eustace, Senior VP of Engineering and Research, Google, Inc., speaks during a press conference, Monday, July 20, 2009, announcing the launch of Moon in Google Earth, an immersive 3D atlas of the Moon, accessible within Google Earth 5.0, Monday, July 20, 2009, at the Newseum in Washington. Photo Credit: (NASA/Bill Ingalls)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 flight engineer Steve Swanson of NASA is seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Bill Ingalls)

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 flight engineer Steve Swanson of NASA is seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Retrodirective Radar Calibration Nanosatellite

DTIC Science & Technology

2013-07-01

Martin (Student Program Manager); Nicholas G. Fisher (Student Systems Engineer) University of Hawaii JULY 2013 Final Report...Cost-Effective, Rapid Design of a Student-Built Radar Calibration Nanosatellite Larry K. Martin , Nicholas G. Fisher, Toy Lim, John...University of Hawaii Reinventing Space Conference AIAA-RS-2012-3001 Martin 1 AIAA Reinventing Space Conference 2012

Show & Tell. Proceedings of the Ontario Universities' Conference (1st, Guelph, Canada, May 1987).

ERIC Educational Resources Information Center

Herrmann, Thom, Ed.

Twenty-three conference papers focus on the use of information technology in Ontario's technical colleges and universities: "The Analytic Criticism Module--Authorial Structures & Design" (P. Beam); "Computing by Design" (R. D. Brown & J. D. Milliken); "Engineers and Computers" (P. S. Chisholm, M. Iwaniw, and…

Expedition 28 Press Conference

NASA Image and Video Library

2011-06-06

Expedition 28 NASA Flight Engineer Mike Fossum, left, and Soyuz Commander Sergei Volkov of Russia share a laugh during a press conference, Monday, June 6, 2011, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission is set to launch on Tuesday, June 8, from the Baikonur Cosmodrome. Photo Credit: (NASA/Carla Cioffi)

RESNA Conference Explores New Horizons in Assistive Technology.

ERIC Educational Resources Information Center

Beck, Susan Gilbert

1996-01-01

In June 1996, the Rehabilitation Engineering and Assistive Technology Society of North America, whose mission is to help people with disabilities achieve their life goals with technology, met in Salt Lake City (Utah). This article provides an overview of the conference, describing product exhibits, courses, meetings, and particularly research…

Using Student Technical Conferences to Build Multidisciplinary Teamwork Skills

ERIC Educational Resources Information Center

Silverstein, David L.

2007-01-01

An open-ended student conference project involving sophomore, junior, and senior chemical engineering students is described. The project is designed to address outcomes in each of the courses in which those students are enrolled, as well as broader "soft skills" including multidisciplinary teamwork, communications, lifelong learning, and…

FORUM ON INNOVATIVE HAZARDOUS WASTE TREATMENT TECHNOLOGIES: DOMESTIC AND INTERNATIONAL. Third, Dallas, Texas, June 11-13, 1991 - TECHNICAL PAPERS

EPA Science Inventory

On June 11 -13,1991, the U.S. Environmental Protection Agency's Technology Innovation Office and Risk Reduction Engineering Laboratory hosted an international conference in Dallas, TX, to exchange solutions to hazardous waste treatment problems. This conference, the Third Forum...

Partial Bibliography of Work on Expert Systems,

DTIC Science & Technology

1982-12-01

Bibliography: AAAI American Association for Artificial Intelligence ACM Association for Computing Machinery AFIPS American Federation of Information...Processing Societies ECAI European Conference on Artificial Intelligence IEEE Institute for Electrical and Electronic Engineers IFIPS International...Federation of Information Processing Societies IJCAI International Joint Conferences on Artificial Intelligence SIGPLAN ACM Special Interest Group on

Expedition 11 Press Conference

NASA Image and Video Library

2005-04-13

Expedition 11 Flight Engineer and NASA Science Officer John Phillips is seen during a press conference, Thursday, April 14, 2005, in Baikonur, Kazakhstan. Phillips, Expedition 11 Commander Sergei Krikalev and, European Space Agency astronaut Roberto Vittori, of Italy, are scheduled to launch aboard a Soyuz TMA-6 spacecraft April 15. Krikalev and Phillips will spend six months on the station, replacing Expedition 10 Commander Leroy Chiao and Flight Engineer Salizhan Sharipov, while Vittori will spend eight days on the station under a commerical contract between ESA and the Russian Federal Space Agency, returning to Earth with Chiao and Sharipov on April 25. Photo Credit: (NASA/Bill Ingalls)

Taking the Plunge: Next Steps in Engaged Learning: Project Kaleidoscope-Connecticut Conference of Independent Colleges Conference for Science Educators.

PubMed

Frederick, Jennifer

2010-09-01

College and university science educators from across Connecticut gathered at Yale's West Campus in April 2010 for a Project Kaleidoscope (PKAL) program entitled "Taking the Plunge: Next Steps in Engaged Learning." Funded by the National Science Foundation (NSF) and co-sponsored by the Connecticut Conference of Independent Colleges (CCIC) and Yale's McDougal Graduate Teaching Center, the event was the latest in a PKAL series of one-day conferences aimed at equipping science, technology, engineering, and math (STEM) instructors with effective approaches to engaging students and training future scientists.

GE STEM Teacher's Conference

NASA Image and Video Library

2017-07-13

Education Specialists Lynn Dotson, left, of the NASA Public Engagement Center, and Lester Morales, right, of Texas State University's NASA STEM Educator Professional Development Collaborative, explain the Rocketry Engineering Design Challenge to teachers participating in the 2017 GE Foundation High School STEM Integration Conference at the Center for Space Education at NASA's Kennedy Space Center. High school teachers from across the country took part in the week-long conference, which is designed to explore effective ways for teachers, schools and districts from across the country to integrate STEM throughout the curriculum. The conference is a partnership between GE Foundation and the National Science Teachers Association.

Engineer: The Professional Bulletin of Army Engineers. Volume 38, PB 5-08-3/4, July-December 2008

DTIC Science & Technology

2008-12-01

50 The Battle of Shiloh By Captain John T. Shelton 54 Pioneering Nondoctrinal Bridging Operations: The “Roller Skate ” Repair By First...for Army Lessons Learned (CALL) to conduct an Engineer and Base Camp Collection and Analysis Team (CAAT). As a result of this trip, we collected a...provided an outbrief at the 20th Engineer Brigade Lessons Learned Conference in December. Many thanks to the 20th Engineer Brigade, 926th Engineer

Establishing the Research Agenda for Increasing the Representation of Women in Engineering and Computing

PubMed Central

Buse, Kathleen; Hill, Catherine; Benson, Kathleen

2017-01-01

While there is an extensive body of research on gender equity in engineering and computing, there have been few efforts to glean insight from a dialog among experts. To encourage collaboration and to develop a shared vision of the future research agenda, a 2 day workshop of 50 scholars who work on the topic of gender in engineering and computing was held at a rural conference center. The structure of the conference and the location allowed for time to reflect, dialog, and to craft an innovative research agenda aimed at increasing the representation of women in engineering and computing. This paper has been written by the conference organizers and details the ideas and recommendations from the scholars. The result is an innovative, collaborative approach to future research that focuses on identifying effective interventions. The new approach includes the creation of partnerships with stakeholders including businesses, government agencies, non-profits and academic institutions to allow a broader voice in setting research priorities. Researchers recommend incorporating multiple disciplines and methodologies, while expanding the use of data analytics, merging and mining existing databases and creating new datasets. The future research agenda is detailed and includes studies focused on socio-cultural interventions particularly on career choice, within undergraduate and graduate programs, and for women in professional careers. The outcome is a vision for future research that can be shared with researchers, practitioners and other stakeholders that will lead to gender equity in the engineering and computing professions. PMID:28469591

Establishing the Research Agenda for Increasing the Representation of Women in Engineering and Computing.

PubMed

Buse, Kathleen; Hill, Catherine; Benson, Kathleen

2017-01-01

While there is an extensive body of research on gender equity in engineering and computing, there have been few efforts to glean insight from a dialog among experts. To encourage collaboration and to develop a shared vision of the future research agenda, a 2 day workshop of 50 scholars who work on the topic of gender in engineering and computing was held at a rural conference center. The structure of the conference and the location allowed for time to reflect, dialog, and to craft an innovative research agenda aimed at increasing the representation of women in engineering and computing. This paper has been written by the conference organizers and details the ideas and recommendations from the scholars. The result is an innovative, collaborative approach to future research that focuses on identifying effective interventions. The new approach includes the creation of partnerships with stakeholders including businesses, government agencies, non-profits and academic institutions to allow a broader voice in setting research priorities. Researchers recommend incorporating multiple disciplines and methodologies, while expanding the use of data analytics, merging and mining existing databases and creating new datasets. The future research agenda is detailed and includes studies focused on socio-cultural interventions particularly on career choice, within undergraduate and graduate programs, and for women in professional careers. The outcome is a vision for future research that can be shared with researchers, practitioners and other stakeholders that will lead to gender equity in the engineering and computing professions.

Proceedings of the Seventh Annual Summer Conference. NASA/USRA: University Advanced Design Program

NASA Technical Reports Server (NTRS)

1991-01-01

The Advanced Design Program (ADP) is a unique program that brings together students and faculty from U.S. engineering schools with engineers from the NASA centers through integration of current and future NASA space and aeronautics projects into university engineering design curriculum. The Advanced Space Design Program study topics cover a broad range of projects that could be undertaken during a 20-30 year period beginning with the deployment of the Space Station Freedom. The Advanced Aeronautics Design Program study topics typically focus on nearer-term projects of interest to NASA, covering from small, slow-speed vehicles through large, supersonic passenger transports and on through hypersonic research vehicles. Student work accomplished during the 1990-91 academic year and reported at the 7th Annual Summer Conference is presented.

Editorial Conference Comments by the General Chair

NASA Astrophysics Data System (ADS)

Reed, Robert A.

2017-01-01

The 53rd IEEE Nuclear and Space Radiation Effects Conference (NSREC) was held July 11-15, 2016, at the Oregon Convention Center in Portland; the conference hotel was the Portland Doubletree. The NSREC is recognized as one of the premier international conferences on radiation effects in electronic materials, devices, and systems. The 2016 conference continued this tradition with a strong technical program, a one-day tutorial short course, radiation effects data workshop, industrial exhibit, and meetings for the IEEE Women in Engineering and Young Professionals organizations. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society (NPSS), and supported by Atmel, BAE Systems, Boeing, Cobham Semiconductor Solutions, Freebird Semiconductor, Honeywell, International Rectifier, Intersil Corporation, Jet Propulsion Laboratory, Northrop Grumman, Southwest Research Institute, and VPT Rad.

Computer modeling and design of diagnostic workstations and radiology reading rooms

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Amato, Carlos L.; Balbona, Joseph A.; Boots, Kevin; Valentino, Daniel J.

2000-05-01

We used 3D modeling techniques to design and evaluate the ergonomics of diagnostic workstation and radiology reading room in the planning phase of building a new hospital at UCLA. Given serious space limitations, the challenge was to provide more optimal working environment for radiologists in a crowded and busy environment. A particular attention was given to flexibility, lighting condition and noise reduction in rooms shared by multiple users performing diagnostic tasks as well as regular clinical conferences. Re-engineering workspace ergonomics rely on the integration of new technologies, custom designed cabinets, indirect lighting, sound-absorbent partitioning and geometric arrangement of workstations to allow better privacy while optimizing space occupation. Innovations included adjustable flat monitors, integration of videoconferencing and voice recognition, control monitor and retractable keyboard for optimal space utilization. An overhead compartment protecting the monitors from ambient light is also used as accessory lightbox and rear-view projection screen for conferences.

Protecting intellectual property in space; Proceedings of the Aerospace Computer Security Conference, McLean, VA, March 20, 1985

NASA Technical Reports Server (NTRS)

1985-01-01

The primary purpose of the Aerospace Computer Security Conference was to bring together people and organizations which have a common interest in protecting intellectual property generated in space. Operational concerns are discussed, taking into account security implications of the space station information system, Space Shuttle security policies and programs, potential uses of probabilistic risk assessment techniques for space station development, key considerations in contingency planning for secure space flight ground control centers, a systematic method for evaluating security requirements compliance, and security engineering of secure ground stations. Subjects related to security technologies are also explored, giving attention to processing requirements of secure C3/I and battle management systems and the development of the Gemini trusted multiple microcomputer base, the Restricted Access Processor system as a security guard designed to protect classified information, and observations on local area network security.

Early Training Estimation System

DTIC Science & Technology

1984-06-01

Cybernetics and Society, 1980, pp. 1067-1974. J. David , J. Price, Successful communication in full scale engineering development statements of work. Air Force...Technical Memorandum 24-80, 1980, US Army Engineering Laboratory. S. Shrier , Algorithms for system design. Proceedings of the international conference on

Preface - BraMat 2017

NASA Astrophysics Data System (ADS)

Munteanu, Daniel

2018-04-01

The main goal of the BraMat 2017 Conference was, as for the previous editions, to stimulate an international exchange of information in the field of materials science and engineering and to establish future research directions. The main topics of this edition included: ​Metallic materials (Section I), Biomaterials (Section II), Ceramics, polymers and composite materials (Section III), Surface engineering (Section IV), Nanomaterials (Section V), Welding engineering (Section VI), Safety engineering (Section VII), and Magnesium science and engineering (Section VIII).

Experimental investigations of the hydrogen addition effects on diesel engine performance

NASA Astrophysics Data System (ADS)

Mirica, I.; Pana, C.; Negurescu, N.; Cernat, A.; Nutu, C.

2016-08-01

In the global content regarding the impact on the environmental of the gases emissions resulted from the fossil fuels combustion, an interest aspect discussed on the 21st Session of the Conference of the Parties from the 2015 Paris Climate Conference and the gradual diminution of the worldwide oil reserves contribute to the necessity of searching of alternative energy from durable and renewable resources. At the use of hydrogen as addition in air to diesel engine, the level of CO, HC and smoke from the exhaust gases will decrease due to the improvement of the combustion process. At low and medium partial loads and low hydrogen energetic ratios used the NOX emission level can decrease comparative to classic diesel engine. The hydrogen use as fuel for diesel engine leads to the improving of the energetic and emissions performance of the engine due to combustion improvement and reduction of carbon content. The paper presents, in a comparative way, results of the experimental researches carried on a truck compression ignition engine fuelled with diesel fuel and with hydrogen diesel fuel and hydrogen as addition in air at different engine operation regimes. The results obtained during experimental investigations show better energetic and pollution performance of the engine fuelled with hydrogen as addition in air comparative to classic engine. The influences of hydrogen addition on engine operation are shown.

Modeling and simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanham, R.; Vogt, W.G.; Mickle, M.H.

1986-01-01

This book presents the papers given at a conference on computerized simulation. Topics considered at the conference included expert systems, modeling in electric power systems, power systems operating strategies, energy analysis, a linear programming approach to optimum load shedding in transmission systems, econometrics, simulation in natural gas engineering, solar energy studies, artificial intelligence, vision systems, hydrology, multiprocessors, and flow models.

Multimedia in Education. Proceedings of an Invitational Conference on Multimedia in Education (Cupertino, California, June 19-20, 1986).

ERIC Educational Resources Information Center

Ambron, Sueann, Ed.; Hooper, Kristina, Ed.

1987-01-01

This collection of articles exploring multimedia in education was compiled from presentations at an invitational conference on Multimedia in Education. Following an introduction by Sueann Ambron ("New Visions of Reality: Multimedia and Education"), articles are grouped under six headings: (1) Computer Science and Engineering: "The…

Home | Society of Women Engineers

Science.gov Websites

virtual instruction by industry experts and are accessible to members. Find a Learning Activity Explore on ways to engage and promote an inclusive culture. Learn More... Experience WE17 Virtual Access> ;> Check out what you missed with Virtual Conference Access Purchase the Virtual Conference on SWE's

Online World Conference and Expo: A Zillion Things at Once.

ERIC Educational Resources Information Center

Chuck, Lysbeth B.

1997-01-01

Presents the keynote speakers of the Online World 1997 conference, as well as HotBot and other search engines, the CyberClinic tracks (Practical Searching, Resource Management, Trends and Technology, Corporate Electronic Publishing, Content Reviews, and Roundtable Discussions), Web-based communities, and an exhibited database of over 12,000…

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Parimal Kopardekar, NASA Ames Senior Engineer for Ait Transportation Systems gave an overview of UTM (Left). Huy Tran, NASA Ames Aeronautics Director, presents NASA UTM Project Overview.

Report on the Conference on Transposition and Genome Engineering 2015 (TGE 2015): advancing cutting-edge genomics technology in the ancient city of Nara.

PubMed

Woltjen, Knut; Yamamoto, Takashi; Kokubu, Chikara; Takeda, Junji

2016-05-01

From November 17 to 20 in 2015, the Conference on Transposition and Genome Engineering 2015 (TGE 2015) was held at Nara Kasugano International Forum-IRAKA-in Nara, Japan, located at the center of Nara Park. All of the presentations were carried out at Nohgaku hall in Nara Kasugano International Forum-IRAKA. Participation totaled 148 persons (30 international, 118 domestic), who were able to engage in lively scientific discussions over the 4-day period. The guest speaker list consisted of many top-notch international researchers, an achievement for which the conference received praise from the attendees. There were 36 oral presentations including the keynote lecture (22 presentations from guest speakers, complemented with 14 selected from abstract submissions). Additionally, there were 46 poster presentations. The conference uniquely combined research mainly from two different genomics approaches: (i) transposon technology allowing random genomic integration followed by gene discovery-related phenotypes and (ii) genome editing technology with designer nuclease allowing precise modification of a gene-of-interest. © 2016 Molecular Biology Society of Japan and John Wiley & Sons Australia, Ltd.

PREFACE: 7th International Conference on Modern Practice in Stress and Vibration Analysis

NASA Astrophysics Data System (ADS)

Barton, J.

2009-07-01

The proceedings contain the papers presented at the 7th International Conference on Modern Practice in Stress and Vibration Analysis. The collection of papers represents the range of activities that are carried out to understand the functionality of engineering systems and structures through stress/strain based evaluation and dynamic response. The scope is broad and covers theoretical studies, modelling and experimental evaluations. Many of the papers cover integration techniques and approaches to better understanding of system performance and failure. All of the papers have been peer reviewed by at least two experts and represent the state of the art of research in this area. The conference is the seventh in the series, following on from previous conferences in Bath, Glasgow, Nottingham, Dublin, Sheffield and Liverpool. Although based in the British Isles the conference has a truly international flavour with offerings from 22 countries. The conference is organised by the Institute of Physics Applied Mechanics Group (formerly the Stress and Vibration Group). It incorporates activities associated with the British Society for Strain Measurement including the Measurements Lecture, the EMex Exhibition and the Young Stress Analyst Competition. The organising committee is grateful for the support of all of the authors, the scientific committee and keynote speakers who played a significant role in the review process, to John Edwards who was instrumental in managing the paper review and submission process, Dawn Stewart and Claire Garland of the Institute of Physics for organising the conference, social programme and registration and Biana Gale of the British Society for Strain Measurement for organising the Exhibition. The organising committee is also grateful to the sponsors of the conference for their kind support and to the co-sponsors for distributing information on the conference. Professor Janice Barton Professor of Experimental Mechanics University of Southampton School of Engineering Sciences Conference Chairman The PDF contains lists of the organising committee, scientific committee, sponsors and co-sponsors.

PREFACE: 7th International Conference on Modern Practice in Stress and Vibration Analysis

NASA Astrophysics Data System (ADS)

Dulieu-Barton, J. M.

2009-07-01

The proceedings contain the papers presented at the 7th International Conference on Modern Practice in Stress and Vibration Analysis. The collection of papers represents the range of activities that are carried out to understand the functionality of engineering systems and structures through stress/strain based evaluation and dynamic response. The scope is broad and covers theoretical studies, modelling and experimental evaluations. Many of the papers cover integration techniques and approaches to better understanding of system performance and failure. All of the papers have been peer reviewed by at least two experts and represent the state of the art of research in this area. The conference is the seventh in the series, following on from previous conferences in Bath, Glasgow, Nottingham, Dublin, Sheffield and Liverpool. Although based in the British Isles the conference has a truly international flavour with offerings from 22 countries. The conference is organised by the Institute of Physics Applied Mechanics Group (formerly the Stress and Vibration Group). It incorporates activities associated with the British Society for Strain Measurement including the Measurements Lecture, the EMex Exhibition and the Young Stress Analyst Competition. The organising committee is grateful for the support of all of the authors, the scientific committee and keynote speakers who played a significant role in the review process, to John Edwards who was instrumental in managing the paper review and submission process, Dawn Stewart and Claire Garland of the Institute of Physics for organising the conference, social programme and registration and Biana Gale of the British Society for Strain Measurement for organising the Exhibition. The organising committee is also grateful to the sponsors of the conference for their kind support and to the co-sponsors for distributing information on the conference. Professor Janice M Dulieu-Barton Professor of Experimental Mechanics University of Southampton School of Engineering Sciences Conference Chairman The PDF contains lists of the organising committee, scientific committee, sponsors and co-sponsors.

PREFACE: The Irago Conference 2012

NASA Astrophysics Data System (ADS)

Sandhu, Adarsh; Okada, Hiroshi

2013-04-01

The Irago Conference 2012 - 360 degree outlook on critical scientific and technological challenges for a sustainable society Organized by the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology, the Irago Conference, held recently (15-16 November) in Aichi, Japan, aimed to enhance mutual understanding between scientists, engineers and policymakers. Over 180 participants tackled topics ranging from energy and natural resources to public health and disaster prevention. The 360-degree outlook of the conference impressed speakers and guests. ''This conference has been extremely informative,'' noted Robert Gellar from the University of Tokyo. ''A unique conference with experts from a range of backgrounds,'' agreed Uracha Ruktanonchai from the National Nanotechnology Center (NANOTEC) in Thailand. Similarly, G P Li, professor of electrical engineering and computer science at the University of California Irvine commented that he had been ''able to think the unthinkable'' as a range of topics came together. The conference was streamed live on Ustream to ensure that researchers from across the world could benefit from thought-provoking presentations examining global issues such as energy, disaster mitigation and nanotechnology. ''This was wonderful,'' said Oussama Khatib from Stanford University, ''A good recipe of speakers from such a range of backgrounds.'' Manuscripts submitted to the organizers were peer-reviewed, and the papers in this proceedings were accepted for Journal of Physics: Conference Series. In addition to the formal speaker programme, graduate-student sessions provided a platform for graduate students to describe their latest findings as oral presentations. A series of excursions to relevant locations, such as the Tahara megasolar region under construction and a local car-manufacturing factory, gave participants the opportunity to further consider practical applications of their research in industry. Irago Conference 2013 is scheduled to be held in October 2013 as a platform for participants from a wide range of backgrounds and specialities to interact and discuss solutions to increasingly important environmental, social, and technological challenges people of the 21st century. Conference photograph

Substrate Sorting by a Supercharged Nanoreactor

PubMed Central

2017-01-01

Compartmentalization of proteases enables spatially and temporally controlled protein degradation in cells. Here we show that an engineered lumazine synthase protein cage, which possesses a negatively supercharged lumen, can exploit electrostatic effects to sort substrates for an encapsulated protease. This proteasome-like nanoreactor preferentially cleaves positively charged polypeptides over both anionic and zwitterionic substrates, inverting the inherent substrate specificity of the guest enzyme approximately 480 fold. Our results suggest that supercharged nanochambers could provide a simple and potentially general means of conferring substrate specificity to diverse encapsulated catalysts. PMID:29278496

Proceedings of the 1986 IEEE international conference on systems, man and cybernetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1986-01-01

This book presents the papers given at a conference on man-machine systems. Topics considered at the conference included neural model-based cognitive theory and engineering, user interfaces, adaptive and learning systems, human interaction with robotics, decision making, the testing and evaluation of expert systems, software development, international conflict resolution, intelligent interfaces, automation in man-machine system design aiding, knowledge acquisition in expert systems, advanced architectures for artificial intelligence, pattern recognition, knowledge bases, and machine vision.

US and Cuban Scientists Forge Collaboration on Arbovirus Research.

PubMed

Pérez-Ávila, Jorge; Guzmán-Tirado, Maria G; Fraga-Nodarse, Jorge; Handley, Gray; Meegan, James; Pelegrino-Martínez de la Cotera, Jose L; Fauci, Anthony S

2018-04-01

After December 17, 2014, when the US and Cuban governments announced their intent to restore relations, the two countries participated in various exchange activities in an effort to encourage cooperation in public health, health research and biomedical sciences. The conference entitled Exploring Opportunities for Arbovirus Research Collaboration, hosted at Havana's Hotel Nacional, was part of these efforts and was the first major US-Cuban scientific conference in over 50 years. Its purpose was to share information about current arbovirus research and recent findings, and to explore opportunities for future joint research. The nearly 100 participants included leading arbovirus and vector transmission experts from ten US academic institutions, NIH, CDC, FDA and the US Department of Defense. Cuban participants included researchers, clinicians and students from Cuba's Ministry of Public Health, Pedro Kourí Tropical Medicine Institute, Center for Genetic Engineering and Biotechnology, Center for State Control of Medicines and Medical Devices and other health research and regulatory organizations. Topics highlighted at the three-day meeting included surveillance, research and epidemiology; pathogenesis, immunology and virology; treatment and diagnosis; vector biology and control; vaccine development and clinical trials; and regulatory matters. Concurrent breakout discussions focused on novel vector control, nonvector transmission, community engagement, Zika in pregnancy, and workforce development. Following the conference, the Pedro Kourí Tropical Medicine Institute and the US National Institute of Allergic and Infectious Diseases have continued to explore ways to encourage and support scientists in Cuba and the USA who wish to pursue arbovirus research cooperation to advance scientific discovery to improve disease prevention and control. KEYWORDS Arboviruses, flavivirus, Zika virus, chikungunya virus, dengue virus, research, disease vectors, Cuba, USA.

Advances in cryogenic engineering. Volume 27 - Proceedings of the Cryogenic Engineering Conference, San Diego, CA, August 11-14, 1981

NASA Astrophysics Data System (ADS)

Fast, R. W.

Applications of superconductivity are considered, taking into account MHD and fusion, generators, transformers, transmission lines, magnets for physics, cryogenic techniques, electrtronics, and aspects of magnet stability. Advances related to heat transfer in He I are discussed along with subjects related to theat transfer in He II, refrigeration of superconducting systems, refrigeration and liquefaction, dilution and magnetic refrigerators, refrigerators for space applications, mass transfer and flow phenomena, and the properties of fluids. Developments related to cryogenic applications are also explored, giving attention to bulk storage and transfer of cryogenic fluids, liquefied natural gas operations, space science and technology, and cryopumping. Topics related to cryogenic instrumentation and controls include the production and use of high grade silicon diode temperature sensors, the choice of strain gages for use in a large superconducting alternator, microprocessor control of cryogenic pressure, and instrumentation, data acquisition and reduction for a large spaceborne helium dewar. For individual items see A83-43221 to A83-43250

NANOTR9: 9th Nanoscience and Nanotechnology Conference

NASA Astrophysics Data System (ADS)

2014-11-01

The conference series NanoTR is the major conference on nanoscience and nanotechnology in Turkey. It brings together leading scientists and engineers in nanotechnology to exchange information on their latest research progress. An exhibition of the companies working in the related field is also organized as a part of the event. With intensive international participation, NanoTR conference series has spread outside the national border and has become an international event in this field. Among international contributions, a wide interest from the countries around Turkey should be emphasized. 9th in the series was organized by Atatürk University in Erzurum-Turkey on June 24-28, 2013 with more than 900 scientists, researchers, private sector representatives from around the world. Conference program included 6 plenary speakers, 35 invited speakers (18 of them were from outside the country), 116 oral presentations, and 340 poster presentations. In addition to 6 plenary sessions, 17 oral and 4 poster sessions created very lively discussion forums covering a vast range of current and emerging sciences from nano-materials, nanoscience, nanofabrication, nano-engineering, nano-electronics, nano-biotechnology, to ethical and social issues of nanoscience and nanotechnology. Also, panel discussions about industrial applications, tutorial sessions have been organized for students, new-comers and company employees.

PREFACE: MRS International Materials Research Conference (IMRC-2008)

NASA Astrophysics Data System (ADS)

Wang, Zhanguo; Qiu, Yong; Li, Yongxiang

2009-03-01

This volume contains selected papers presented at the MRS International Materials Research Conference (IMRC-2008) held in Chongqing, China, 9-12 June 2008. IMRC-2008 included 9 symposia of A. Eco/Environmental Materials, B. Sustainable Energy Materials, C. Electronic Packaging Materials, D. Electronic Materials, E. Materials and Processes for Flat-panel Displays, F. Functional Ceramics, G. Transportation Materials, H. Magnesium and I. Biomaterials for Medical Applications. Nearly 1200 participants from 33 countries attended the conference, and the conference organizers received more than 700 papers. After the peer review processes, 555 papers were selected to be published in 9 Journals or proceedings, including J. of Materials Research (JMR), Rare Metal Materials and Engineering, J. of Univ. Science and Technology Beijing, Biomedical Materials: Materials for Tissue Engineering and Regenerative Medicine, Chinese Journal of Aeronautics, Materials Science Forum, and Journal of Physics: Conference Series. Among the 555 selected papers, 91 papers are published in this volume, and the topics mainly cover electronic matrials, processes for flat-panel displays and functional ceramics. The editors would like to give special thanks to the graduate students Liwu Jiang, Ming Li and Di He from Beihang University for their hard work compiling and typesetting each paper in this volume. Zhanguo Wang, Yong Qiu and Yongxiang Li Editors

FOURTH FORUM ON INNOVATIVE HAZARDOUS WASTE TREATMENT TECHNOLOGIES: DOMESTIC AND INTERNATIONAL - TECHNICAL PAPERS

EPA Science Inventory

On November 17-19, 1992, the U.S. Environmental Protection Agency's Technology Innovation Office and Risk Reduction Engineering Laboratory, Department of Energy, Corps of Engineers, and California Environmental Preotection Agency, hosted an International conference in San Francis...

Using Model-Based System Engineering to Provide Artifacts for NASA Project Life-Cycle and Technical Reviews Presentation

NASA Technical Reports Server (NTRS)

Parrott, Edith L.; Weiland, Karen J.

2017-01-01

This is the presentation for the AIAA Space conference in September 2017. It highlights key information from Using Model-Based Systems Engineering to Provide Artifacts for NASA Project Life-cycle and Technical Reviews paper.

PREFACE: 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures

NASA Astrophysics Data System (ADS)

2014-09-01

Dear Colleagues, 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures was held on March 25 - 27, 2014 at St. Petersburg Academic University - Nanotechnology Research and Education Centre of the Russian Academy of Sciences. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were: Mikhail Glazov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir Dubrovskii (Saint Petersburg Academic University RAS, Russia) Alexey Kavokin (University of Southampton, United Kingdom and St. Petersburg State University, Russia) Vladimir Korenev (Ioffe Physico-Technical Institute RAS, Russia) Sergey Kukushkin (Institute of Problems of Mechanical Engineering RAS, Russia) Nikita Pikhtin (Ioffe Physico-Technical Institute RAS, Russia and "Elfolum" Ltd., Russia) Dmitry Firsov (Saint Petersburg State Polytechnical University, Russia) During the poster session all undergraduate and graduate students attending the conference presented their works. Sufficiently large number of participants with more than 160 student attendees from all over the world allowed the Conference to provide a fertile ground for the fruitful discussions between the young scientists as well as to become a perfect platform for the valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year's School and Conference is supported by SPIE (The International Society for Optics and Photonics), OSA (The Optical Society), St. Petersburg State Polytechnical University and by Skolkovo Foundation. It is a continuation of the annual schools and seminars for youth on topical problems of physics and technology that is organized by the Academic University since 2009. We invite all the students and young scientists to attend "Saint Petersburg OPEN" in 2015! Please, find details at http://spbopen2015.spbau.com/ With best wishes, Editorial Board, Program and Organizing Committees

XXIV International Conference on Integrable Systems and Quantum symmetries (ISQS-24)

NASA Astrophysics Data System (ADS)

Burdík, Čestmír; Navrátil, Ondřej; Posta, Severin

2017-01-01

The XXIV International Conference on Integrable Systems and Quantum Symmetries (ISQS-24), organized by the Department of Mathematics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University Prague and the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research, belongs to the successful series of conferences held at the Czech Technical University which began in 1992 and is devoted to problems of mathematical physics related to the theory of integrable systems, quantum groups and quantum symmetries. During the last 5 years, each of the conferences gathered around 110 scientists from all over the world. 43 papers of plenary lectures and contributions presented at ISQS-24 are published in the present issue of Journal of Physics: Conference Series.

Dopantless Diodes for Efficient Mid/deep UV LEDs and Lasers - Topic 4.2 Optoelectronics

DTIC Science & Technology

2017-09-12

Week, Santa Barbara, CA, “Polarization hole engineering in deep- ultraviolet nanowire LEDs”, ATM Sarwar, Santino Carnevale, Thomas Kent, Brelon May...Electronic Materials Conference, Santa Barbara, California, “ Engineering the polarization hole doping of graded nanowire ultraviolet LEDs integrated on...Nanostructures for Optoelectronic and Magnetic Functionalities: Growth, Characterization and Engineering Publication Type: Thesis or Dissertation

Software And Systems Engineering Risk Management

DTIC Science & Technology

2010-04-01

RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

Engineered Resilient Systems: A DoD Perspective

DTIC Science & Technology

2014-01-01

Selection and peer-review under responsibility of the University of Southern California. doi: 10.1016/j.procs.2014.03.103 ScienceDirect Conference...Selection and peer-review under responsibility of the University of Southern California. Keywords:rResilience, decision analysis, ERS, Engineered...Michael Sievers, Jet Propulsion Laboratory; Marilee Wheaton, The Aerospace Corporation Redondo Beach, CA, March 21-22, 2014 Engineered Resilient

Analyzing Citation and Research Collaboration Characteristics of Faculty in Aerospace, Civil and Environmental, Electrical and Computer, and Mechanical Engineering

ERIC Educational Resources Information Center

Zhang, Li

2018-01-01

This article investigates citation and research collaboration habits of faculty in four engineering departments. The analysis focuses on similarities and differences among the engineering disciplines. Main differences exist in the use of conference papers and technical reports. The age of cited materials varies by discipline and by format.…

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR MEZZANINE: LUNCH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR MEZZANINE: LUNCH AND CONFERENCE ROOM, STORAGE AREA, OFFICES FOR FOREMEN, STENOS, ENGINEERS, DISPATCHER, WOMEN'S RESTROOM. HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-12, 2/1958. INL INDEX NO. 532-0653-00-381-102837, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Not so global: a bibliometric look at engineering education research

NASA Astrophysics Data System (ADS)

Williams, Bill; Wankat, Phillip C.; Neto, Pedro

2018-03-01

It has been suggested that Engineering Education Research (EER) is going global. If this were the case we would assume that the research of EER scholars in different parts of the globe would be informed by literature describing prior work within and beyond their home country/region. The authors set out to test this hypothesis by applying citation analysis to research presented in four publication venues: the annual conferences organised by ASEE (American Society of Engineering Education) and SEFI (European Society of Engineering Education) and two archival journals published by these two societies: Journal of Engineering Education (JEE) and European Journal of Engineering Education (EJEE). Our findings from the analysis of 4321 publications show that citations in ASEE conferences are dominated by sources with US affiliations, whereas the SEFI data show that while US sources are frequently cited, European and other authors are also well represented. With regard to the journals JEE and EJEE, a similar pattern is observed. These results suggest that, in citation terms, European EER is relatively global but US EER is not. The authors conclude by suggesting that if the EER community is to aspire to quality scholarship, there needs to be debate around how such issues can be tackled.

PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

NASA Astrophysics Data System (ADS)

Gaol, F. L.

2015-06-01

The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19 countries, and there were six paralell sessions and four keynote speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2015.

NACA Conference on Turbojet Engines for Supersonic Propulsion. A Compilation of Technical Material Presented

DTIC Science & Technology

1953-10-01

turbojet Pngine with a turbine cooled by compressor air involves several design pruilems that do not e~ist in an uncooled turbo - jet engine . Careful...facilitate testing the sheet-metal blades in the turbojet engine , bases were formed by removing the solid airfoil portion from the standard turbine blade ...OF TURBINE BLADES by J. C. Freche 6. APPLICATION AND OPERATION OF AIR-COOLED TURBINES IN TURBOJET ENGINES

Expedition 11 Press Conference

NASA Image and Video Library

2005-04-13

Expedition 11 Flight Engineer and NASA Science Officer John Phillips, left, crew Commander Sergei Krikalev and European Space Agency Astronaut Roberto Vittori, of Italy, join together at a press conference, Thursday, April 14, 2005, prior to their April 15 launch aboard the Soyuz TMA-6 spacecraft from the Baikonur Cosmodrome in Kazakhstan. Krikalev and Phillips will spend six months on the station, replacing Expedition 10 Commander Leroy Chiao and Flight Engineer Salizhan Sharipov, while Vittori will spend eight days on the Station under a commerical contract between ESA and the Russian Federal Space Agency, returning to Earth with Chiao and Sharipov on April 25. Photo Credit: (NASA/Bill Ingalls)

Expedition 18 Press Conference

NASA Image and Video Library

2008-10-10

The quarantined crew, from left, American spaceflight participant Richard Garriott, Expedition 18 Commander Michael Fincke, Flight Engineer Yuri V. Lonchakov, back up Expedition 18 Commander Gennady Padalka, Flight Engineer Mike Barratt and spaceflight participant Nik Halik answer reporters questions during a press conference at the Cosmonaut Hotel, Saturday, Oct. 11, 2008, in Baikonur, Kazakhstan. Fincke, Lonchakov and Garriott are scheduled to launch Oct. 12 and dock with the International Space Station on Oct. 14. Fincke and Lonchakov will spend six months on the station, while Garriott will return to Earth Oct. 24 with two of the Expedition 17 crew members currently on the International Space Station. Photo Credit: (NASA/Bill Ingalls)

Preface

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2016-09-01

The ;International Conference on Surfaces, Coatings and Nano-Structured Materials; (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of ;nano;. Since 2005, it has been very successfully organised in several European countries, including Portugal, Spain, Italy, France, Poland, Czech Republic, Ireland and also in USA, and in Asia, including Turkey and China.

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Parimal Kopardekar, NASA Ames Senior Engineer for Ait Transportation Systems gave an overview of UTM (Left). Tom Wilczek, Aerospace and Defence industry representative and Nevada Govenor's Office of Economic Development (Right).

Preface

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2017-11-01

The ;International Conference on Surfaces, Coatings and Nano-Structured Materials; (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of ;nano;. Since 2005, it has been very successfully organised in several European countries, including Portugal, Spain, Italy, France, Poland, Czech Republic, Ireland, United Kingdom and also in USA, and in Asia, including Turkey and China.

Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 1

NASA Technical Reports Server (NTRS)

1991-01-01

Papers from the technical sessions of the Technology 2001 Conference and Exposition are presented. The technical sessions featured discussions of advanced manufacturing, artificial intelligence, biotechnology, computer graphics and simulation, communications, data and information management, electronics, electro-optics, environmental technology, life sciences, materials science, medical advances, robotics, software engineering, and test and measurement.

NASA Public Affairs and NUANCE Lab News Conference at Reno-Stead Airport.

NASA Image and Video Library

2016-10-19

News Conference following the test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. Parimal Kopardekar, NASA Ames Senior Engineer for Ait Transportation Systems gave an overview of UTM (Left). Maril Mora (Podium), President / CEO of the Reno -Tahoe Airport Authority welcomes NASA and Partners.

PREFACE: International Conference on Structural Nano Composites (NANOSTRUC 2012)

NASA Astrophysics Data System (ADS)

Njuguna, James

2012-09-01

Dear Colleagues It is a great pleasure to welcome you to NanoStruc2012 at Cranfield University. The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and discussion of future directions. NanoStruc brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas. The conference is split in 7 panel sessions, Metallic Nanocomposites and Coatings, Silica based Nanocomposites, safty of Nanomaterials, Carboin based Nanocomposites, Multscale Modelling, Bio materials and Application of Nanomaterials. All accepted Papers will be published in the IOP Conference Series: Materials Science and Engineering (MSE), and included in the NanoStruc online digital library. The abstracts will be indexed in Scopus, Compedex, Inspec, INIS (International Nuclear Information System), Chemical Abstracts, NASA Astrophysics Data System and Polymer Library. Before ending this message, I would like to acknowledge the hard work, professional skills and efficiency of the team which ensured the general organisation. As a conclusion, I would like to Welcome you to the Nanostruc2012 and wish you a stimulating Conference and a wonderful time. On behalf of the scientific committee, Signature James Njuguna Conference Chair The PDF of this preface also contains committee listings and associates logos.

PREFACE: 5th Baltic Conference on Silicate Materials

NASA Astrophysics Data System (ADS)

Mezinskis, G.; Bragina, L.; Colombo, P.; Frischat, G. H.; Grabis, J.; Greil, P.; Deja, J.; Kaminskas, R.; Kliava, J.; Medvids, A.; Nowak, I.; Siauciunas, R.; Valancius, Z.; Zalite, I.

2011-12-01

Logo This Volume of IOP Conference Series: Materials Science and Engineering presents a selection of the contributions to the 5th Baltic Conference on Silicate Materials (BaltSilica2011) held at Riga Technical University, Riga, Latvia from 23-25 May 2011. The conference was organized by Riga Technical University (Latvia) and Kaunas University of Technology (Lithuania). The series of Baltic conferences on silicate materials was started since 2004: the first conference was held in Riga, Latvia, 2004; the second conference was held in Kaunas, Lithuania 2005; the third was held again in Riga, Latvia, 2007, and the fourth was held in Kaunas, Lithuania 2009. BaltSilica 2011 was attended by around 50 participants from Latvia, Lithuania, Estonia, Germany, Poland, Italy, France, Ukraine and Russia. In comparison with previous silicate materials conferences, the broadening of participating countries is an indication of the interest of scientists, engineers and students to exchange research ideas, latest results, and to find new research topics for cooperation in the fields of silicate, high temperature materials, and inorganic nanomaterials. The scientific programme included 8 invited plenary lectures 23 oral presentations and 25 posters [1]. Scientific themes covered in the conference and in this special issue: Natural and Artificial Stone Materials; Traditional and New Ceramic and Glass-Like Materials; Nanoparticles and Nanomaterials. This volume consists of 23 selected proceeding papers. The Editor of this special issue is grateful to all the contributors to BaltSilica 2011. I am also very grateful to the scientific committee, the local organizing committee, the session chairs, the referees who refereed the submitted articles to this issue, and to students from the Department of Silicate, High Temperature and Inorganic Nanomaterials Technology of the Riga Technical University who ensured the smooth running of the conference. Particular thanks goes to eight plenary speakers who provided interesting findings and thoughtful overviews in the scientific themes of the conference. Special thanks go to Prof., Dr.rer.nat. Günther Heinz Frischat (Germany) who encouraged and supported the organization of these scientific meetings from the very first BaltSilica conferences. With warm regards and best wishes for the next BaltSilica conference. The Conference Chairman Gundars Mezinskis Reference [1] Baltic Conference on Silicate Materials. Book of abstracts of the 5th Baltic Conference on Silicate Materials BaltSilica 2011 : 23-25 May 2011, Riga, Latvia ed G Mezinskis, G Sedmale, J Setina, I Sperberga, L Krage, I Pavlovska, D Andersone (Riga: RTU Publishing House) p 94

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

NASA Technical Reports Server (NTRS)

Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

2005-01-01

This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC Workshop, CFD practitioners were invited to compute a two-dimensional benchmark problem for which geometry, flow conditions, grids, and experimental data were available before the workshop. The purpose was to accumulate a database of simulations for a single problem using a range of CFD codes, turbulence models, and grid strategies so as to expand knowledge of model performance/requirements and guide simulation of practical CC configurations.

7 CFR 1737.30 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Studies-Area Coverage Survey and Loan Design § 1737.30 General. In support of a loan application, the... Coverage Survey) and (b) engineering studies to determine the system design that provides service most efficiently (the Loan Design). The RUS field representative confers with the borrower and its engineer to...

7 CFR 1737.30 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Studies-Area Coverage Survey and Loan Design § 1737.30 General. In support of a loan application, the... Coverage Survey) and (b) engineering studies to determine the system design that provides service most efficiently (the Loan Design). The RUS field representative confers with the borrower and its engineer to...

7 CFR 1737.30 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Studies-Area Coverage Survey and Loan Design § 1737.30 General. In support of a loan application, the... Coverage Survey) and (b) engineering studies to determine the system design that provides service most efficiently (the Loan Design). The RUS field representative confers with the borrower and its engineer to...

7 CFR 1737.30 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Studies-Area Coverage Survey and Loan Design § 1737.30 General. In support of a loan application, the... Coverage Survey) and (b) engineering studies to determine the system design that provides service most efficiently (the Loan Design). The RUS field representative confers with the borrower and its engineer to...

7 CFR 1737.30 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Studies-Area Coverage Survey and Loan Design § 1737.30 General. In support of a loan application, the... Coverage Survey) and (b) engineering studies to determine the system design that provides service most efficiently (the Loan Design). The RUS field representative confers with the borrower and its engineer to...

Development of Imaging Fourier-Transform Spectroscopy for the Characterization of Turbulent Jet Flames

DTIC Science & Technology

2014-09-18

Spatially resolved infrared spectra of jet exhaust from an F109 turbofan engine...Appendix E contains a conference proceeding in its entirety [32]. This proceeding summarizes analysis of a turbofan engine exhaust via the Hyper-Cam and...demonstrated in a separate experiment. Recently, exhaust from an F109 turbofan engine was imaged with the IFTS[32]. Examination of the time-averaged

7th Annual CMMI Technology Conference Volume 3 Thursday Presentations

DTIC Science & Technology

2007-11-15

Inc. - US Corporate Research Effective Systems Engineering: What’s the Payoff for Program Performance?, NDIA Systems EngineeringsEffectiveness What’s...Inc. - US Corporate Research CMMI, Configuration Management, and Baseball – How to Score, Ms. Julie Schmarje, Raytheon Company Automated Systems for...Dr. Aldo Dagnino, ABB, Inc. US Corporate Research Systems Assurance – Practices Make Perfect – How Your Engineering and Management Practices Can Help

Foreword

NASA Astrophysics Data System (ADS)

Labarta, Amilcar; Vazquez, Manuel; Fontcuberta, Josep; Schuller, Ivan; Rivas, José; Givord, Dominique

2016-02-01

The International Conference on Magnetism (ICM), organized under the auspices of the International Union of Pure and Applied Physics (IUPAP), takes place every three years. It gathers scientists and engineers involved in magnetism research, from the most fundamental aspects to the most applied ones. ICM 2015, the 20th conference in the series, took place in Barcelona, from 5th to 10th July 2015, organized by a broadly international magnetics community with special commitment from the Spanish community. Almost 2200 delegates took part to ICM 2015, placing this conference amongst those with highest attendance in the series (see Table 1).

Featured collection introduction: contaminants of emerging concern II

USGS Publications Warehouse

Battaglin, William A.; Kolok, Alan; Battaglin, William; Kolok, Alan

2014-01-01

This collection of 13 articles focuses on CECs, and each of the articles highlights a specific aspect of this broad topic. The articles were solicited from researchers who participated in the second summer specialty conference on this topic, organized by the American Water Resources Association. The title of the conference was “CECs in Water Resources II: Research, Engineering and Community Action,” and the conference, as well as the articles in this featured collection, focus on a better and more comprehensive understanding of these contaminants. The conference was held in Denver, Colorado, on June 25-27, 2012, and approximately 125 conference attendees participated in an interdisciplinary forum of more than 75 presentations including keynote or plenary presentations by Dana Kolpin, Jorg Drewes, Heiko Schoenfuss, Chris Metcalfe, Vicki Blazer, and Tyrone Hayes. The first conference was held in 2007 and also produced a featured collection of articles (Battaglin and Kolpin, 2009).

Proceedings of: 2005 Particle Acceleration Confence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Stuart

2006-01-01

The 21st Particle Accelerator Conference, PAC05, took place at the Knoxville Convention Center (KCC) from Monday through Friday, May 16-20, 2005. Sponsored by the American Physical Society (APS), the Institute of Electrics and Electronics Engineers (IEEE) with its subdivision of Nuclear and Plasma Sciences Society (NPSS), the conference was hosted by the Oak Ridge National Laboratory (ORNL) Spallation Neutron Source (SNS) Project and Thomas Jefferson National Accelerator Facility (JLab). The conference was chaired by Norbert Holtkamp, and the Local Organizing Committee was made up of staff from the ORNL SNS Project under the chairmanship of Stuart Henderson. The conference welcomedmore » over 1400 delegates from the United States, Europe, Asia, the Middle East, South America and from as far away as Australia. Almost 1400 papers where processed during the conference and will be published on the Joint Accelerator Conferences Website (JACoW) page.« less

Developing Technologies for Space Resource Utilization: Concept for a Planetary Engineering Research Institute

NASA Astrophysics Data System (ADS)

Blacic, J. D.; Dreesen, D.; Mockler, T.

2000-01-01

There are two principal factors that control the economics and ultimate utilization of space resources: 1) space transportation, and 2) space resource utilization technologies. Development of space transportation technology is driven by major government (military and civilian) programs and, to a lesser degree, private industry-funded research. Communication within the propulsion and spacecraft engineering community is aided by an effective independent professional organization, the American Institute of Aeronautics and Astronautics (AIAA). The many aerospace engineering programs in major university engineering schools sustain professional-level education in these fields. NASA does an excellent job of public education in space science and engineering at all levels. Planetary science, a precursor and supporting discipline for space resource utilization, has benefited from the establishment of the Lunar and Planetary Institute (LPI) which has served, since the early post-Apollo days, as a focus for both professional and educational development in the geosciences of the Moon and other planets. The closest thing the nonaerospace engineering disciplines have had to this kind of professional nexus is the sponsorship by the American Society of Civil Engineers of a series of space engineering conferences that have had a predominantly space resource orientation. However, many of us with long-standing interests in space resource development have felt that an LPI-like, independent institute was needed to focus and facilitate both research and education on the specific engineering disciplines needed to develop space resource utilization technologies on an on-going basis.

Expedition 39 Press Conference

NASA Image and Video Library

2014-03-24

Expedition 39 flight engineer Steve Swanson of NASA and Soyuz commander Aleksander Skvortsov of the Russian Federal Space Agency, Roscosmos are seen in quarantine, behind glass, during the final press conference be Monday, March 24, 2014, at the Cosmonaut Hotel in Baikonur, Kazakhstan. The mission to the International Space Station is set to launch March 26 from the Baikonur Cosmodrome. Photo Credit: (NASA/Joel Kowsky)

Proceedings of the RESNA '98 Annual Conference: The State of the Arts and Science (Minneapolis, Minnesota, June 26-30, 1998). Volume 18.

ERIC Educational Resources Information Center

Springle, Stephen, Ed.

This text contains papers presented at the 1998 conference of the Rehabilitation Engineering and Assistive Technology Society of North America held on June 26-30, 1998, in Minneapolis, Minnesota. Papers are divided into the following sections: (1) service delivery and public policy, including papers addressing independent literacy, integrating…

The Science of Enhanced Student Engagement and Employability: Introducing the Psychology Stream of the Inaugural HEA STEM Conference

ERIC Educational Resources Information Center

Hulme, Julie; Taylor, Jacqui; Davies, Mark N. O.; Banister, Peter

2012-01-01

The Higher Education Academy (HEA) is committed to enhancing the quality of learning and teaching for all university students in the UK, and the inaugural conference for the Science, Technology, Engineering and Mathematics (STEM) subjects, held in April 2012 at Imperial College, London, aimed to showcase research and evidence-based educational…

Expedition 37 Press Conference

NASA Image and Video Library

2013-09-24

NASA backup crewmember Steve Swanson waves hello at a press conference held at the Cosmonaut Hotel, on Tuesday, Sept. 24, 2013, in Baikonur, Kazakhstan. Launch of the Soyuz rocket is scheduled for September 26 and will send Hopkins, Soyuz Commander Oleg Kotov and Russian Flight Engineer Sergei Ryazansky on a five and a half-month mission aboard the International Space Station. Photo Credit: (NASA/Carla Cioffi)

ENGINEERING SYSTEMS FOR EDUCATION AND TRAINING, PROCEEDINGS OF THE DOD - OE - NSIA CONFERENCE (ARLINGTON, VIRGINIA, JUNE 14-15, 1966).

ERIC Educational Resources Information Center

DAVENPORT, ROY K.; AND OTHERS

A JOINT CONFERENCE OF PERSONNEL CONCERNED WITH EDUCATION AND TRAINING OF MANPOWER IN THE DEPARTMENT OF DEFENSE (DOD), OFFICE OF EDUCATION, AND THE NATIONAL SECURITY INDUSTRIAL ASSOCIATION, WAS CALLED BY THE DOD TO CONSIDER HOW THE THREE ORGANIZATIONS COULD COLLABORATE. THE DOD PROPOSED USING THE ENORMOUS POWER OF ITS PROCUREMENT SYSTEM TO…

Engineered Resilient Systems (ERS) S&T Priority Description and Roadmap

DTIC Science & Technology

2011-11-08

ERS PSC, NDIA Disruptive Technologies 8 November 2011 Page-1 Distribution Statement A: Approved for public release; distribution is unlimited...ODASD SE NDIA 8th Annual Disruptive Technologies Conference 8 November 2011 Report Documentation Page Form ApprovedOMB No. 0704-0188...release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the NDIA Disruptive Technologies Conference, November 8,-9, 2011 Washington, DC 14

Development Problems With Component Construction. Proceedings of Conference of the Building Research Institute, Division of Engineering and Industrial Research (Fall 1959).

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC.

Publication of conference papers includes--(1) an overview of the ceiling system complex by a lighting manufacturer, (2) review of problems influencing the development of roofing systems, (3) description of cooperative research within the cement industry, and (4) description of joint research development of structural ceramic panels. Included…

Proceedings of the International Conference on Physics Education. (Nanjing, The People's Republic of China, August 31-September 5, 1986).

ERIC Educational Resources Information Center

International Union of Pure and Applied Physics.

This document contains 65 papers presented at the International Conference on Physics Education. Included are papers dealing with: (1) physics education in China; (2) the evaluation of physics courses in engineering colleges; (3) climate and weather; (4) the implications of physics education research for the classroom; (5) university physics…

Proceedings of the RESNA 2000 Annual Conference: Technology for the New Millennium (Orlando, Florida, June 28-July 2, 2000). Volume 20.

ERIC Educational Resources Information Center

Winters, Jack, Ed.

This text contains papers presented at the annual conference of the Rehabilitation Engineering and Assistive Technology Society of North America (RESNA) held on June 28-July 2, 2000, in Orlando, Florida. Papers are divided into the following sections: (1) technology for special populations, which includes papers that discuss using…

Insulated Masonry Cavity Walls. Proceedings of the Research Correlation Conference by the Building Research Institute, Division of Engineering and Industrial Research. (April 1960).

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC.

Publication of conference paper texts include --(1) history and development of masonry cavity walls, (2) recent research related to determination of thermal and moisture resistance, (3) wall design and detailing, (4) design for crack prevention, (5) mortar specification characteristics, (6) performance experience with low-rise buildings, (7)…

Creating Future Scientists and Engineers. 2013 Keynote Speech

ERIC Educational Resources Information Center

Hicks, Stephen

2013-01-01

This article presents a summary of the keynote speech presented at the ITEEA Conference in Columbus, OH, March 4, 2013, by Steven Hicks. Hicks is former Director, Research & Development, Flavor & Fragrance Development Global Capability, for the Procter & Gamble Company. Educated as a chemical engineer, his outside interests include…

Searchers Net Treasure in Monterey.

ERIC Educational Resources Information Center

McDermott, Irene E.

1999-01-01

Reports on Web keyword searching, metadata, Dublin Core, Extensible Markup Language (XML), metasearch engines (metasearch engines search several Web indexes and/or directories and/or Usenet and/or specific Web sites), and the Year 2000 (Y2K) dilemma, all topics discussed at the second annual Internet Librarian Conference sponsored by Information…

Engineering Education in Research-Intensive Universities

ERIC Educational Resources Information Center

Alpay, E.; Jones, M. E.

2012-01-01

The strengths and weaknesses of engineering education in research-intensive institutions are reported and key areas for developmental focus identified. The work is based on a questionnaire and session summaries used during a two-day international conference held at Imperial College London. The findings highlight several common concerns, such as…

The Lice, Turkey, earthquake of September 6, 1975; a preliminary engineering investigation

USGS Publications Warehouse

Yanev, P. I.

1976-01-01

The Fifth European Conference on Earthquake Engineering was held on September 22 through 25 in Istanbul, Turkey. The opening speech by the Honorable H. E. Nurettin Ok, Minister of Reconstruction and Resettlement of Turkey, introduced the several hundred delegates to the realities of earthquake hazards in Turkey:

Computational Methods for Predictive Simulation of Stochastic Turbulence Systems

DTIC Science & Technology

2015-11-05

Science and Engineering, Venice , Italy, May 18-20, 2015, pp. 1261-1272. [21] Yong Li and P.D. Williams Analysis of the RAW Filter in Composite-Tendency...leapfrog scheme, Proceedings of the VI Conference on Computational Methods for Coupled Problems in Science and Engineering, Venice , Italy, May 18-20

Road safety and simulation conferences: an interdisciplinary network for safer roads.

PubMed

Benedetto, Andrea; Calvi, Alessandro

2014-06-01

From 23rd to 25th October 2013 more than 300 researchers attended the 4th International Conference on Road Safety and Simulation (RSS 2013) in Rome, Italy, hosted by the Inter Universities Research Centre for Road Safety (CRISS) at the Department of Engineering of Roma Tre University. The aim of the Conference was to create a common interdisciplinary arena for researchers and professionals involved in road safety, facilitate the exchange of know-how and progress in the last advanced techniques, methods and tools and their applications to safety analysis. This special issue highlights some of the research presented at the Conference. Copyright © 2014 Elsevier B.V. All rights reserved.

Message from the Conference Chairs

NASA Astrophysics Data System (ADS)

Krishna, Sanjay; Perera, Unil

2015-05-01

We were very excited to host the 8th International Workshop on Quantum Structure Infrared Photodetectors (QSIP 2014), in picturesque Santa Fe, New Mexico from June 29th-July 3rd, 2014. This followed successful QSIP conferences at Dana Point (2000), Torino (2002), Kananaskis (2004), Kandy (2006), Yosimite (2009), Istanbul (2010) and Corsica (2012). The QSIP workshop is a high level scientific conference that aims to bring together scientists, engineers, industrial organizations, students and users in order to discuss recent advances, and to share the "State of the Art" in this field. QSIP conferences provide an international forum for attendees to present and discuss progress in infrared device physics and modeling, materials growth and processing issues, focal plane array development and characterization.

NASA/DOD Control/Structures Interaction Technology, 1986

NASA Technical Reports Server (NTRS)

Wright, Robert L. (Compiler)

1987-01-01

Papers presented at the CSI Technology Conference are given. The conference was jointly sponsored by the NASA Office of Aeronautics and Space Technology and the Department of Defense. The conference is the beginning of a series of annual conferences whose purpose is to report to industry, academia, and government agencies the current status of Control/Structures Interaction technology. The conference program was divided into five sessions: (1) Future spacecraft requirements; Technology issues and impact; (2) DOD special topics; (3) Large space systems technology; (4) Control of flexible structures, and (5) Selected NASA research in control structures interaction.

Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

NASA Technical Reports Server (NTRS)

Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

2010-01-01

Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

2nd Radio and Antenna Days of the Indian Ocean (RADIO 2014)

NASA Astrophysics Data System (ADS)

2014-10-01

It was an honor and a great pleasure for all those involved in its organization to welcome the participants to the ''Radio and Antenna Days of the Indian Ocean'' (RADIO 2014) international conference that was held from 7th to 10th April 2014 at the Sugar Beach Resort, Wolmar, Flic-en-Flac, Mauritius. RADIO 2014 is the second of a series of conferences organized in the Indian Ocean region. The aim of the conference is to discuss recent developments, theories and practical applications covering the whole scope of radio-frequency engineering, including radio waves, antennas, propagation, and electromagnetic compatibility. The RADIO international conference emerged following discussions with engineers and scientists from the countries of the Indian Ocean as well as from other parts of the world and a need was felt for the organization of such an event in this region. Following numerous requests, the Island of Mauritius, worldwide known for its white sandy beaches and pleasant tropical atmosphere, was again chosen for the organization of the 2nd RADIO international conference. The conference was organized by the Radio Society, Mauritius and the Local Organizing Committee consisted of scientists from SUPELEC, France, the University of Mauritius, and the University of Technology, Mauritius. We would like to take the opportunity to thank all people, institutions and companies that made the event such a success. We are grateful to our gold sponsors CST and FEKO as well as URSI for their generous support which enabled us to partially support one PhD student and two scientists to attend the conference. We would also like to thank IEEE-APS and URSI for providing technical co-sponsorship. More than hundred and thirty abstracts were submitted to the conference. They were peer-reviewed by an international scientific committee and, based on the reviews, either accepted, eventually after revision, or rejected. RADIO 2014 brought together participants from twenty countries spanning five continents: Australia, Botswana, Brazil, Canada, China, Denmark, France, India, Italy, Mauritius, Poland, Reunion Island, Russia, South Africa, South Korea, Spain, Switzerland, The Netherlands, United Kingdom, and USA. The conference featured eleven oral sessions and one poster session on state-of-the-art research themes. Three internationally recognized scientists delivered keynote speeches during the conference. Prizes for the first and second Best Student Papers were awarded during the closing ceremony. Following the call for the extended contributions for publication as a volume in the IOP Conference Series: Materials Science and Engineering (MSE), both on-line and in print, we received thirty-two full papers. All submitted contributions were then peer-reviewed, revised whenever necessary, and accepted or rejected based on the recommendations of the reviewers of the editorial board. At the end of the procedure, twenty-five of them have been accepted for publication in this volume.

PREFACE: International Conference on Control and Synchronization of Dynamical Systems (CSDS-2005)

NASA Astrophysics Data System (ADS)

Pisarchik, Alexander N.

2005-01-01

This volume of Journal of Physics: Conference Series contains selected articles by the participants at the International Conference on Control and Synchronization of Dynamical Systems (CSDS-2005) organized by Centro de Investigaciones en Optica (CIO) in cooperation with the Society for Industrial and Applied Mathematics (SIAM), which was held in Leon, Guanajuato, Mexico on 4-7 October 2005. CSDS-2005 featured the latest research in nonlinear dynamics concentrating on the theory of control and synchronization of complex systems and its applications in different areas of science and engineering, including optics, electronics, mechanics, chemistry, medicine, economy, communication, etc. The conference brought together leading researchers, both theoreticians and experimentalists, from different fields of science and provided an excellent opportunity for sharing ideas and problems among specialists in controlling dynamical systems and synchronization. The meeting served a dual purpose: to expose the scientific community to the cutting edge of forefront research done by leaders in this area from as many as 25 countries and to attract the attention of Mexican researchers to this field of science. These proceedings are intended to be a record of this conference and to serve as a reference for future research which the conference hopes to have initiated. After the pioneering work on controlling chaos of E Ott, C Grebogi and J Yorke appeared in Physical Review Letters in 1990, the number of works on this topic grew tremendously. Our extensive bibliographic search among 110 peer reviewed journals yielded more than 1500 papers on controlling chaos and more than 2500 on synchronization of chaotic systems published during the last decade. The numbers of publications are still at their peaks that began to saturate, in 1998 and 2003, respectively. It is my pleasure to acknowledge the contribution of the program and organizing committees, the funding agencies and cooperating organizations, and the staff of CIO in organizing CSDS-2005. I am very grateful to all plenary and invited speakers for their acceptance of our invitation. Their contributions enhanced significantly the prestige of our conference. I would like to express my special thanks to Prof. Jürgen Kurths for his agreement to give a tutorial course on synchronization after the meeting. My sincere thanks are also due to Dr Fernando Mendoza-Santoyo, the General Director of CIO, and to Dr Ramón Rodriguez-Vera, the Research Director, for facilitating the use of institutional infrastructure, as well as for their interest and help in organization of the conference. I record my special thanks to Annette Torres for her invaluable secretarial work, to Bernardo Ruiz-Olvera for his help in visa processing, and to Carolina Arriola for designing the conference website and printed materials. I would also like to thank all my students for their assistance in holding the meeting. In the publication of the conference proceedings, I am grateful to our referees (V Aboites, V Afraimovich, F T Arecchi, A D'Anjou, C Grebogi, V Erofeyev, Hongjie Yu, L Kalyakin, A Karami, S K Dana, A K Das, J Kurths, A Loskutov, G Luna, R Meucci, C R Mirasso, C L Pando, P Parmananda, Qinhua Hu, R Rechtman, P K Roy, R Roy, N Rulkov, E A Sataev, A Shil'nikov, S Sinha, V M Somsikov, N N Verichev, U E Vincent, A Volkovskii, J Zebrowski) for their knowledgeable and careful comments, and to Dr Rider Jaimes-Reátegui and Dr Hugo Garcia-Lopez for helping me with the editorial process. Finally, I thank the Institute of Physics Editorial team for publishing these proceedings very rapidly and efficiently. International Program Committee V Afraimovich (Universidad de San Luis Potosi, Mexico) T F Arecchi (University of Firenze, Italy) C Grebogi (Universidad de Sao Paulo, Brazil) J Haus (University of Dayton, USA) (OSA representative) J Kurths (University of Potsdam, Germany) F Mendoza-Santoyo (Centro de Investigaciones en Optica, Mexico) (General Director) A N Pisarchik (Centro de Investigaciones en Optica, Mexico) (Chair) R Roy (University of Maryland, USA) (SIAM representative) S Sinha (Institute of Mathematical Sciences, India) Local Organizing Committee V Aboites (Centro de Investigaciones en Optica, Mexico) R Espinosa-Luna (Centro de Investigaciones en Optica, Mexico) J H García-López (Universidad de Guadalajara, Mexico) R Jaimes-Reátegui (Universidad de Guadalajara, Mexico) A V Kir'yanov (Centro de Investigaciones en Optica, Mexico) E Kourmychev (Centro de Investigaciones en Optica, Mexico) V J Pinto-Robledo (Centro de Investigaciones en Optica, Mexico) R Rodriguez-Vera (Centro de Investigaciones en Optica, Mexico) (Research Director) G V Vazquéz-García (Centro de Investigaciones en Optica, Mexico) Funding Agencies Consejo de Ciencia y Tecnología de Estado Guanajuato, Mexico Abdus Salam International Centre for Theoretical Physics, Trieste, Italy International Mathematical Union, USA Centro Latinoamericano de Física, Brazil Academia Mexicana de Ciencias, Mexico Fundación México—Estados Unidos para la Ciencia, Mexico Cooperating Organizations International Society for Optical Engineering American Physical Society Optical Society of America Institute of Physics

KSC-02pd0663

NASA Image and Video Library

2002-05-14

KENNEDY SPACE CENTER, FLA. -- A presentation by Franklin W. Olin College of Engineering is on display at the KSC Visitor Complex for this year's NASA MarsPort Engineering Design Student Competition 2002 conference. Participants are presenting papers on engineering trade studies to design optimal configurations for a MarsPort Deployable Greenhouse for operation on the surface of Mars. Judges in the competition were from KSC, Dynamac Corporation and Florida Institute of Technology. The winning team's innovative ideas will be used by NASA to evaluate and study other engineering trade concepts

Proceedingsof the International Conference on Inverse Design Concepts and Optimization in Engineering Sciences (3rd) ICIDES-III Held in Washington, DC 23-25 October 1991

DTIC Science & Technology

1991-09-01

jet engine (even rocket engine ) rotating components. Examples have been presented for compressor and turbine profile designs. Both methods are...used for experimental studies on plasmatrons and gasdynamic stands in which the gas jets are created by special aviation and rocket engines . Similar... Aviation Institute, Bd. Pacli 220, 77538 Bucharest, ROMANIA 45 --’, Inverse Airfoil Design Procedure .Uging a Mliitigrid Navier-Stokes ,Method) J.B

Cabin air filtration: helping to protect occupants from infectious diseases.

PubMed

Bull, Karen

2008-05-01

Presentation made at the Aviation Health Conference, London, November 2006. In modern aircraft, the air in the cabin is provided by the environmental control system (ECS) and consists of approximately 50% outside air (engine 'bleed air') mixed with approximately 50% filtered, recirculated air. This paper describes how modern aircraft cabin air filters are effective at removing airborne particulate contamination (such as bacteria and viruses) from the recirculated air system. It also describes one of the technological solutions that is currently available to treat any odours or volatile organic compounds (VOCs) that may be present in the aircraft ECS.

Mother, Earth, Father Sky Symposium

NASA Technical Reports Server (NTRS)

Bowman, B.

1977-01-01

A conference was held in which minority aerospace scientists and engineers interacted with the minority community, particularly at the junior high, high school, and college levels. There were two presentations in the biological sciences, two in the physical and environmental sciences, seven in engineering and computer sciences, and nine in aerospace science and engineering. Aerospace technology careers and aerospace activities were discussed as to how they are relevant to minorities and women.

A tethering mechanism controls the processivity and kinetochore-microtubule plus-end enrichment of the kinesin-8 Kif18A

PubMed Central

Stumpff, Jason; Du, Yaqing; English, Chauca A.; Maliga, Zoltan; Wagenbach, Michael; Asbury, Charles L.; Wordeman, Linda; Ohi, Ryoma

2011-01-01

Summary Metaphase chromosome positioning depends on Kif18A, a kinesin-8 that accumulates at and suppresses the dynamics of K-MT plus ends. By engineering Kif18A mutants that suppress MT dynamics but fail to concentrate at K-MT plus-ends, we identify a mechanism that allows Kif18A to accumulate at K-MT plus ends to a level required to suppress chromosome movements. Enrichment of Kif18A at K-MT plus-ends depends on its C-terminal tail domain, while the ability of Kif18A to suppress MT growth is conferred by the N-terminal motor domain. The Kif18A tail contains a second MT-binding domain that diffuses along the MT lattice, suggesting that it tethers the motor to the MT track. Consistently, the tail enhances Kif18A processivity and is crucial for it to accumulate at K-MT plus-ends. The heightened processivity of Kif18A, conferred by its tail domain, thus promotes concentration of Kif18A at K-MT plus-ends, where it suppresses their dynamics to control chromosome movements. PMID:21884977

PREFACE: 33rd UIT (Italian Union of Thermo-fluid dynamics) Heat Transfer Conference

NASA Astrophysics Data System (ADS)

Paoletti, Domenica; Ambrosini, Dario; Sfarra, Stefano

2015-11-01

The 33rd UIT (Italian Union of Thermo-Fluid Dynamics) Heat Transfer Conference was organized by the Dept. of Industrial and Information Engineering and Economics, University of L'Aquila (Italy) and was held at the Engineering Campus of Monteluco di Roio, L'Aquila, June 22-24, 2015. The annual UIT conference, which has grown over time, came back to L'Aquila after 21 years. The scope of the conference covers a range of major topics in theoretical, numerical and experimental heat transfer and related areas, ranging from energy efficiency to nuclear plants. This year, there was an emphasis on IR thermography, which is growing in importance both in scientific research and industrial applications. 2015 is also the International Year of Light. The Organizing Committee honored this event by introducing a new section, Technical Seminars, which in this edition was mainly devoted to optical flow visualization (also the subject of three different national workshops organized in L'Aquila by UIT in 2003, 2005 and 2008). The conference was held in the recently repaired Engineering buildings, six years after the 2009 earthquake and 50 years after the beginning of the Engineering courses in L'Aquila. Despite some logistical difficulties, 92 papers were submitted by about 270 authors, on eight different topics: heat transfer and efficiency in energy systems, environmental technologies and buildings (32 papers); micro and nano scale thermo-fluid dynamics (5 papers); multi-phase fluid dynamics, heat transfer and interface phenomena (16 papers); computational fluid dynamics and heat transfer (15 papers); heat transfer in nuclear plants (6 papers); natural, forced and mixed convection (6 papers); IR thermography (4 papers); conduction and radiation (3 papers). The conference program scheduled plenary, oral and poster sessions. The three invited plenary Keynote Lectures were given by Prof. Antonio Barletta (University of Bologna, Italy), Prof. Jean-Christophe Batsale (Arts et Metiers Paris Tech, Talence, France) and Prof. Walter Grassi (University of Pisa, Italy). The two invited Technical Seminars were given by Dr. Maurizio Santini (University of Bergamo, Italy) and Prof. Giovanni Tanda (University of Genova, Italy). There were also 13 oral sessions and three poster sessions. This special issue collects the five papers presented in the plenary sessions (keynote lectures and technical seminars) plus 60 papers selected from those presented and discussed during the congress. The UIT 2015 conference has been a useful occasion to stimulate discussion, further the understanding of heat transfer and related phenomena, present the state-of-the-art of some topics, discuss emerging trends and promote collaborations. We hope this issue will maintain and extend some of these features. A special thank you is due to the Organizing and Scientific Committees, to the sponsors and to all the participants.

CRISPR/Cas13a targeting of RNA virus in plants.

PubMed

Chaudhary, Kulbhushan

2018-05-19

This approach is quite promising to control plant viral diseases and create synthetic networks to better understand the structure/function relationship in RNA and proteins. Plant viruses are obligate intracellular parasites which causes enormous losses in crop yield worldwide. These viruses replicate into infected cells by highjacking host cellular machinery. Over the last two decades, diverse approaches such as conventional breeding, transgenic approach and gene silencing strategies have been used to control RNA viruses, but escaped due to high rate of mutation. Recently, a novel CRISPR enzyme, called Cas13a, has been used engineered to confer RNA viruses resistance in plants. Here, we summarize the recent breakthrough of CRISPR/Cas13a and its applications in RNA biology.

1985 Particle Accelerator Conference: Accelerator Engineering and Technology, 11th, Vancouver, Canada, May 13-16, 1985, Proceedings

NASA Astrophysics Data System (ADS)

Strathdee, A.

1985-10-01

The topics discussed are related to high-energy accelerators and colliders, particle sources and electrostatic accelerators, controls, instrumentation and feedback, beam dynamics, low- and intermediate-energy circular accelerators and rings, RF and other acceleration systems, beam injection, extraction and transport, operations and safety, linear accelerators, applications of accelerators, radiation sources, superconducting supercolliders, new acceleration techniques, superconducting components, cryogenics, and vacuum. Accelerator and storage ring control systems are considered along with linear and nonlinear orbit theory, transverse and longitudinal instabilities and cures, beam cooling, injection and extraction orbit theory, high current dynamics, general beam dynamics, and medical and radioisotope applications. Attention is given to superconducting RF structures, magnet technology, superconducting magnets, and physics opportunities with relativistic heavy ion accelerators.

Metabolic pathway engineering based on metabolomics confers acetic and formic acid tolerance to a recombinant xylose-fermenting strain of Saccharomyces cerevisiae

PubMed Central

2011-01-01

Background The development of novel yeast strains with increased tolerance toward inhibitors in lignocellulosic hydrolysates is highly desirable for the production of bio-ethanol. Weak organic acids such as acetic and formic acids are necessarily released during the pretreatment (i.e. solubilization and hydrolysis) of lignocelluloses, which negatively affect microbial growth and ethanol production. However, since the mode of toxicity is complicated, genetic engineering strategies addressing yeast tolerance to weak organic acids have been rare. Thus, enhanced basic research is expected to identify target genes for improved weak acid tolerance. Results In this study, the effect of acetic acid on xylose fermentation was analyzed by examining metabolite profiles in a recombinant xylose-fermenting strain of Saccharomyces cerevisiae. Metabolome analysis revealed that metabolites involved in the non-oxidative pentose phosphate pathway (PPP) [e.g. sedoheptulose-7-phosphate, ribulose-5-phosphate, ribose-5-phosphate and erythrose-4-phosphate] were significantly accumulated by the addition of acetate, indicating the possibility that acetic acid slows down the flux of the pathway. Accordingly, a gene encoding a PPP-related enzyme, transaldolase or transketolase, was overexpressed in the xylose-fermenting yeast, which successfully conferred increased ethanol productivity in the presence of acetic and formic acid. Conclusions Our metabolomic approach revealed one of the molecular events underlying the response to acetic acid and focuses attention on the non-oxidative PPP as a target for metabolic engineering. An important challenge for metabolic engineering is identification of gene targets that have material importance. This study has demonstrated that metabolomics is a powerful tool to develop rational strategies to confer tolerance to stress through genetic engineering. PMID:21219616

The Current Status of Modular Coordination. A Research Correlation Conference of Building Research Institute, Division of Engineering and Industrial Research (Fall 1959).

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC.

Publication of conference presentations include--(1) a brief review of current modular standard development, (2) the statistical status of modular practice, (3) availability of modular products, and (4) educational programs on modular coordination. Included are--(1) explanatory diagrams, (2) text of an open panel discussion, and (3) a list of…

Frontiers in Learning. The Association of Higher Education Facilities Officers Educational Conference and Annual Meeting Proceedings (83rd, Salt Lake City, Utah, July 21-23, 1996).

ERIC Educational Resources Information Center

APPA: Association of Higher Education Facilities Officers, Alexandria, VA.

These 25 papers from a conference of higher education facilities offices are grouped into 5 categories: business management; energy and environment; human resources; operations and maintenance; and planning, design and construction. Papers are: (1) "Provider of Choice" (Jerry C. Black); (2) "Re-Engineering--'Inside-Inside' or Outside-Inside': A…

Beyond access to transformations: A cross-national analysis of women in science and engineering education, 1970--2000

NASA Astrophysics Data System (ADS)

Wotipka, Christine Min

2001-12-01

Over the years, attention to the issue of women in science has tended to focus on individual and organizational efforts to encourage women's greater participation in science and engineering fields of study and occupations. With more intense globalization processes that increasingly shape and are shaped by science, national- and global-level understandings of the situation of women in science and engineering as well as methods to boost their greater and more equal participation in these fields are necessary. This study is a cross-national and longitudinal study of women's participation in science and engineering fields of study at the higher education level. In order to explain the growth in women's participation in these fields of study between 1972--1992, I use a world society theoretical perspective to argue that national linkages to global models regarding women's educational equality and women in science may positively influence their participation in these fields. In multivariate statistical analyses, women's participation in higher education, measured as female enrollment in non-science and non-engineering fields of study, exerted a positive effect on women in science and engineering as did male enrollment in science and engineering higher education. The fact that linkage variables and those measuring women's status and other national-level factors were not found to be influential suggests that world-level factors may be contributing to women's greater participation in these fields. To better understand processes at this level, I use feminist critiques of science to examine the efforts made by the United Nations Educational, Scientific, and Cultural Organization (UNESCO), the United Nations Children's Fund (UNICEF), and the World Bank to address women in science and engineering education over a thirty year time period. My examination of their publications as well as conference declarations and platforms of action from ten international conferences finds a reliance on liberal feminist suggestions such as access and equal opportunities for women in science. More recently, UNESCO publications have included some transformative perspectives that entail possibilities for the inclusion of women's needs and interests into the existing male-dominated scientific curricula and structures. The same is true of some of the most recent international conferences.

Engineering of vault nanocapsules with enzymatic and fluorescent properties

PubMed Central

Kickhoefer, Valerie A.; Garcia, Yvette; Mikyas, Yeshi; Johansson, Erik; Zhou, Jing C.; Raval-Fernandes, Sujna; Minoofar, Payam; Zink, Jeffrey I.; Dunn, Bruce; Stewart, Phoebe L.; Rome, Leonard H.

2005-01-01

One of the central issues facing the emerging field of nanotechnology is cellular compatibility. Nanoparticles have been proposed for diagnostic and therapeutic applications, including drug delivery, gene therapy, biological sensors, and controlled catalysis. Viruses, liposomes, peptides, and synthetic and natural polymers have been engineered for these applications, yet significant limitations continue to prevent their use. Avoidance of the body's natural immune system, lack of targeting specificity, and the inability to control packaging and release are remaining obstacles. We have explored the use of a naturally occurring cellular nanoparticle known as the vault, which is named for its morphology with multiple arches reminiscent of cathedral ceilings. Vaults are 13-MDa ribonucleoprotein particles with an internal cavity large enough to sequester hundreds of proteins. Here, we report a strategy to target and sequester biologically active materials within the vault cavity. Attachment of a vault-targeting peptide to two proteins, luciferase and a variant of GFP, resulted in their sequestration within the vault cavity. The targeted proteins confer enzymatic and fluorescent properties on the recombinant vaults, both of which can be detected by their emission of light. The modified vaults are compatible with living cells. The ability to engineer vault particles with designed properties and functionalities represents an important step toward development of a biocompatible nanocapsule. PMID:15753293

Engineering of vault nanocapsules with enzymatic and fluorescent properties.

PubMed

Kickhoefer, Valerie A; Garcia, Yvette; Mikyas, Yeshi; Johansson, Erik; Zhou, Jing C; Raval-Fernandes, Sujna; Minoofar, Payam; Zink, Jeffrey I; Dunn, Bruce; Stewart, Phoebe L; Rome, Leonard H

2005-03-22

One of the central issues facing the emerging field of nanotechnology is cellular compatibility. Nanoparticles have been proposed for diagnostic and therapeutic applications, including drug delivery, gene therapy, biological sensors, and controlled catalysis. Viruses, liposomes, peptides, and synthetic and natural polymers have been engineered for these applications, yet significant limitations continue to prevent their use. Avoidance of the body's natural immune system, lack of targeting specificity, and the inability to control packaging and release are remaining obstacles. We have explored the use of a naturally occurring cellular nanoparticle known as the vault, which is named for its morphology with multiple arches reminiscent of cathedral ceilings. Vaults are 13-MDa ribonucleoprotein particles with an internal cavity large enough to sequester hundreds of proteins. Here, we report a strategy to target and sequester biologically active materials within the vault cavity. Attachment of a vault-targeting peptide to two proteins, luciferase and a variant of GFP, resulted in their sequestration within the vault cavity. The targeted proteins confer enzymatic and fluorescent properties on the recombinant vaults, both of which can be detected by their emission of light. The modified vaults are compatible with living cells. The ability to engineer vault particles with designed properties and functionalities represents an important step toward development of a biocompatible nanocapsule.

EMERITUS: An Engineer-Manager’s Evaluation, Review Improvement Tool

DTIC Science & Technology

1990-05-01

Donald L., "Excerpts from - Management Time: who’s Got The Monkey?," Harvard Business Review (March - April, 1987), p. 25. Peters, Thomas J., and...Management Conference, from AT to JZ, (24-26 October 1988), p. 116-119. 59 The Samuel Neaman Institute--Technion Report, "Engineering Education 2001

Projecting potential adoption of genetically engineered freeze-tolerant Eucalyptus in the United States

Treesearch

David N. Wear; Ernest Dixon IV; Robert C. Abt; Navinder Singh

2015-01-01

Development of commercial Eucalyptus plantations has been limited in the United States because of the species’ sensitivity to freezing temperatures. Recently developed genetically engineered clones of a Eucalyptus hybrid, which confer freeze tolerance, could expand the range of commercial plantations. This study explores how...

Field Work Proposal: PUBLIC OUTREACH EVENT FOR ACCELERATOR STEWARDSHIP TEST FACILITY PILOT PROGRAM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutton, Andrew; Areti, Hari

2015-03-05

Jefferson Lab’s outreach efforts towards the goals of Accelerator Stewardship Test Facility Pilot Program consist of the lab’s efforts in three venues. The first venue, at the end of March is to meet with the members of Virginia Tech Corporate Research Center (VTCRC) (http://www.vtcrc.com/tenant-directory/) in Blacksburg, Virginia. Of the nearly 160 members, we expect that many engineering companies (including mechanical, electrical, bio, software) will be present. To this group, we will describe the capabilities of Jefferson Lab’s accelerator infrastructure. The description will include not only the facilities but also the intellectual expertise. No funding is requested for this effort. Themore » second venue is to reach the industrial exhibitors at the 6th International Particle Accelerator Conference (IPAC’15). Jefferson Lab will host a booth at the conference to reach out to the >75 industrial exhibitors (https://www.jlab.org/conferences/ipac2015/SponsorsExhibitors.php) who represent a wide range of technologies. A number of these industries could benefit if they can access Jefferson Lab’s accelerator infrastructure. In addition to the booth, where written material will be available, we plan to arrange a session A/V presentation to the industry exhibitors. The booth will be hosted by Jefferson Lab’s Public Relations staff, assisted on a rotating basis by the lab’s scientists and engineers. The budget with IPAC’15 designations represents the request for funds for this effort. The third venue is the gathering of Southeastern Universities Research Association (SURA) university presidents. Here we plan to reach the research departments of the universities who can benefit by availing themselves to the infrastructure (material sciences, engineering, medical schools, material sciences, to name a few). Funding is requested to allow for attendance at the SURA Board Meeting. We are coordinating with DOE regarding these costs to raise the projected conference management cost ceiling in the Conference Management Tool.« less

International Materials Research Meeting in the Greater Region: “Current Trends in the Characterisation of Materials and Surface Modification”

NASA Astrophysics Data System (ADS)

2017-10-01

Preface Dear ladies and gentlemen, On 6th and 7th of April 2017 took place the “International Materials Research Meeting in the Greater Region” at the Saarland University, Saarbrücken, Germany. This meeting corresponded to the 9th EEIGM International Conference on Advanced Materials Research and it was intended as a meeting place for researchers of the Greater Region as well as their partners of the different cooperation activities, like the EEIGM program, the ‘Erasmus Mundus’ Advanced Materials Science and Engineering Master program (AMASE), the ‘Erasmus Mundus’ Doctoral Program in Materials Science and Engineering (DocMASE) and the CREATe-Network. On this meeting, 72 participants from 15 countries and 24 institutions discussed and exchanged ideas on the latest trends in the characterization of materials and surface modifications. Different aspects of the material research of metals, ceramics, polymers and biomaterials were presented. As a conclusion of the meeting, the new astronaut of the European Space Agency Dr. Matthias Maurer, who is an alumni of the Saarland University and the EEIGM, held an exciting presentation about his activities. Following the publication of selected papers of the 2009 meeting in Volume 5 and 2012 meeting in Volume 31 of this journal, it is a great pleasure to present this selection of 9 articles to the readers of the IOP Conference Series: Materials Science and Engineering. The editors are thankful to all of the reviewers for reviewing the papers. Special praise is also given to the sponsors of the conference: European Commission within the program Erasmus Mundus (AMASE and DocMASE), Erasmus+ (AMASE), and Horizon2020 (CREATe-Network, Grant agreement No 644013): the DAAD (Alumni Program), and the German-French University (PhD-Track). List of Author signatures, Conference topics, Organization, Conference impressions and list of the participants are available in this PDF.

Foreword

NASA Astrophysics Data System (ADS)

Couque, Hervé

2012-08-01

The DYMAT International Conference is a "compelling scientific event" for engineers and scientists working in the dynamic behaviour of materials field. Since 1983, DYMAT has been organizing a five days single sessions of oral presentations and poster exhibitions with proceedings available at the beginning of the conferences. Well-known for its scientific interest, the triennially DYMAT International Conferences are the platform to present the most recent scientific achievements on dynamic behaviour of materials relevant to crashworthiness in all types of transports; terminal ballistics related to defence and shielding of satellites, of turbine; blast effects due to industrial explosions, terrorist attacks; material processing such as high speed machining.

Proceedings of the 1995 Particle Accelerator Conference and international Conference on High-Energy Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1996-01-01

Papers from the sixteenth biennial Particle Accelerator Conference, an international forum on accelerator science and technology held May 1–5, 1995, in Dallas, Texas, organized by Los Alamos National Laboratory (LANL) and Stanford Linear Accelerator Center (SLAC), jointly sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Nuclear and Plasma Sciences Society (NPSS), the American Physical Society (APS) Division of Particles and Beams (DPB), and the International Union of Pure and Applied Physics (IUPAP), and conducted with support from the US Department of Energy, the National Science Foundation, and the Office of Naval Research.

Fourier-Mukai, 34 years on

NASA Astrophysics Data System (ADS)

Bruzzo, Ugo; Maciocia, Antony

2017-12-01

This special issue celebrates the 34 years since the discovery of the Fourier-Mukai Transform by Shigeru Mukai. It mostly contains papers presented at the conference held in the Mathematics Research Centre of the University of Warwick, 15th to 19th June 2015 as part of a year long Warwick symposium on Derived categories and applications. The conference was also the annual conference of the Vector Bundles on Algebraic Curves series led by Peter Newstead. The symposium was principally supported by the Engineering and Physical Sciences Research Council of the UK and there was further funding from the London Mathematical Society and the Foundation Compositio.

NASA's Suborbital Missions Teach Engineering and Technology: Goddard Space Flight Center's Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Winterton, Joyce L.

2016-01-01

A 50 minute-workshop based on NASA publicly available information will be conducted at the International Technology and Engineering Educator Association annual conference. Attendees will include middle and high school teachers and university teacher educators. Engineering and technology are essential to NASA's suborbital missions including sounding rockets, scientific balloon and airborne science. The attendees will learn how to include NASA information on these missions in their teaching.

Geminiviruses and Plant Hosts: A Closer Examination of the Molecular Arms Race.

PubMed

Ramesh, Shunmugiah V; Sahu, Pranav P; Prasad, Manoj; Praveen, Shelly; Pappu, Hanu R

2017-09-15

Geminiviruses are plant-infecting viruses characterized by a single-stranded DNA (ssDNA) genome. Geminivirus-derived proteins are multifunctional and effective regulators in modulating the host cellular processes resulting in successful infection. Virus-host interactions result in changes in host gene expression patterns, reprogram plant signaling controls, disrupt central cellular metabolic pathways, impair plant's defense system, and effectively evade RNA silencing response leading to host susceptibility. This review summarizes what is known about the cellular processes in the continuing tug of war between geminiviruses and their plant hosts at the molecular level. In addition, implications for engineered resistance to geminivirus infection in the context of a greater understanding of the molecular processes are also discussed. Finally, the prospect of employing geminivirus-based vectors in plant genome engineering and the emergence of powerful genome editing tools to confer geminivirus resistance are highlighted to complete the perspective on geminivirus-plant molecular interactions.

Geminiviruses and Plant Hosts: A Closer Examination of the Molecular Arms Race

PubMed Central

Ramesh, Shunmugiah V.; Sahu, Pranav P.; Prasad, Manoj; Praveen, Shelly; Pappu, Hanu R.

2017-01-01

Geminiviruses are plant-infecting viruses characterized by a single-stranded DNA (ssDNA) genome. Geminivirus-derived proteins are multifunctional and effective regulators in modulating the host cellular processes resulting in successful infection. Virus-host interactions result in changes in host gene expression patterns, reprogram plant signaling controls, disrupt central cellular metabolic pathways, impair plant’s defense system, and effectively evade RNA silencing response leading to host susceptibility. This review summarizes what is known about the cellular processes in the continuing tug of war between geminiviruses and their plant hosts at the molecular level. In addition, implications for engineered resistance to geminivirus infection in the context of a greater understanding of the molecular processes are also discussed. Finally, the prospect of employing geminivirus-based vectors in plant genome engineering and the emergence of powerful genome editing tools to confer geminivirus resistance are highlighted to complete the perspective on geminivirus-plant molecular interactions. PMID:28914771

Engineering NK Cells Modified With an EGFRvIII-specific Chimeric Antigen Receptor to Overexpress CXCR4 Improves Immunotherapy of CXCL12/SDF-1α-secreting Glioblastoma.

PubMed

Müller, Nadja; Michen, Susanne; Tietze, Stefanie; Töpfer, Katrin; Schulte, Alexander; Lamszus, Katrin; Schmitz, Marc; Schackert, Gabriele; Pastan, Ira; Temme, Achim

2015-06-01

Natural killer (NK) cells are promising effector cells for adjuvant immunotherapy of cancer. So far, several preclinical studies have shown the feasibility of gene-engineered NK cells, which upon expression of chimeric antigen receptors (CARs) are redirected to otherwise NK cell-resistant tumors. Yet, we reasoned that the efficiency of an immunotherapy using CAR-modified NK cells critically relies on efficient migration to the tumor site and might be improved by the engraftment of a receptor specific for a chemokine released by the tumor. On the basis of the DNAX-activation protein 12 (DAP12), a signaling adapter molecule involved in signal transduction of activating NK cell receptors, we constructed an epidermal growth factor variant III (EGFRvIII)-CAR, designated MR1.1-DAP12 which confers specific cytotoxicity of NK cell towards EGFRvIII glioblastoma cells in vitro and to established subcutaneous U87-MG tumor xenografts. So far, infusion of NK cells with expression of MR1.1-DAP12 caused a moderate but significantly delayed tumor growth and increased median survival time when compared with NK cells transduced with an ITAM-defective CAR. Notably, the further genetic engineering of these EGFRvIII-specific NK cells with the chemokine receptor CXCR4 conferred a specific chemotaxis to CXCL12/SDF-1α secreting U87-MG glioblastoma cells. Moreover, the administration of such NK cells resulted in complete tumor remission in a number of mice and a significantly increased survival when compared with the treatment of xenografts with NK cells expressing only the EGFRvIII-specific CAR or mock control. We conclude that chemokine receptor-engineered NK cells with concomitant expression of a tumor-specific CAR are a promising tool to improve adoptive tumor immunotherapy.

Proceedings of the 1987 Aircraft/Engine Structural Integrity Program (ASIP/ENSIP) Conference Held in the Hilton Palacio del Rio Hotel, San Antonio, Texas 1-3 December 1987

DTIC Science & Technology

1988-06-01

upgrading of the depot’s FPI inspection facility, In the forme- case, a realistic projection based while augmenting it with enhanced inspection systems...number of models, powers the twin engined F-15 and the single engined F-16 fighter aircraft. It is an augmented turbofan engine in the 25,000 pound...move from an idea in 1972 to reality today for military gas turbine engines. Special acknowledgement is accorded to the Materials Laboratory of the Air

jsc2013e080223

NASA Image and Video Library

2013-09-06

At the Gagarin Cosmonaut Training Center in Star City, Russia, Expedition 37/38 Soyuz Commander Oleg Kotov (second from left) holds a toy cat mascot during a pre-launch news conference Sept. 6 as his crewmates, Flight Engineer Michael Hopkins of NASA (far left) and Flight Engineer Sergey Ryazanskiy (second from the right) look on. Also participating in the news conference was the head of the Cosmonaut Training Center, Sergei Krikalev (far right). The mascot will be mounted inside the crew’s Soyuz TMA-10M spacecraft over Kotov’s head as a “zero-g indicator” once the crew launches. Their launch to the International Space Station is set for Sept. 26, Kazakh time, from the Baikonur Cosmodrome in Kazakhstan. NASA/Stephanie Stoll

Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 2

NASA Technical Reports Server (NTRS)

1991-01-01

Proceedings of the workshop are presented. The mission of the conference was to transfer advanced technologies developed by the Federal government, its contractors, and other high-tech organizations to U.S. industries for their use in developing new or improved products and processes. Volume two presents papers on the following topics: materials science, robotics, test and measurement, advanced manufacturing, artificial intelligence, biotechnology, electronics, and software engineering.

Year of the Oceans: Science of Information Handling. [Proceedings of the] Annual Conference of the International Association of Marine Science Libraries and Information Centers (10th, Woods Hole, Massachusetts, October 2-5, 1984).

ERIC Educational Resources Information Center

Grundy, R. L., Ed.; Ford, R. T., Ed.

International Association of Marine Science Libraries and Information Centers (IAMSLIC) conferences provide a format for libraries and information specialists to discuss common interests and concerns so that services and information can be made available to scientists, administrators, engineers, educators and students in the discipline of marine…

Nucleic acid molecules conferring enhanced ethanol tolerance and microorganisms having enhanced tolerance to ethanol

DOEpatents

Brown, Steven; Guss, Adam; Yang, Shihui; Karpinets, Tatiana; Lynd, Lee; Shao, Xiongjun

2014-01-14

The present invention provides isolated nucleic acid molecules which encode a mutant acetaldehyde-CoA/alcohol dehydrogenase or mutant alcohol dehydrogenase and confer enhanced tolerance to ethanol. The invention also provides related expression vectors, genetically engineered microorganisms having enhanced tolerance to ethanol, as well as methods of making and using such genetically modified microorganisms for production of biofuels based on fermentation of biomass materials.

List of ARI Conference Papers, Journal Articles, Books, and Book Chapters: 1982-1991

DTIC Science & Technology

1992-10-01

and Engineering Applications of Artificial Intelligence and Expert Systems, Tullahoma, TN. Goehring, D.J., & Hart, R.J. (1985, October). Automated...systems: Computkr-based authoring. Proceedings of the 30th annual meeting of the Artificial Intelligence Society, Dayton, OH. Knapp, D.J., & Pliske, R.M...Moses, F.L. (1984-85) Intelligence vehicle integrated displays. Paper presented at the Conference on Applied Artificial Intelligence , the Data Processing

The 2017 Academic Emergency Medicine Consensus Conference: Catalyzing System Change Through Healthcare Simulation: Systems, Competency, and Outcomes.

PubMed

Bond, William F; Hui, Joshua; Fernandez, Rosemarie

2018-02-01

Over the past decade, emergency medicine (EM) took a lead role in healthcare simulation in part due to its demands for successful interprofessional and multidisciplinary collaboration, along with educational needs in a diverse array of cognitive and procedural skills. Simulation-based methodologies have the capacity to support training and research platforms that model micro-, meso-, and macrosystems of healthcare. To fully capitalize on the potential of simulation-based research to improve emergency healthcare delivery will require the application of rigorous methods from engineering, social science, and basic science disciplines. The Academic Emergency Medicine (AEM) Consensus Conference "Catalyzing System Change Through Healthcare Simulation: Systems, Competency, and Outcome" was conceived to foster discussion among experts in EM, engineering, and social sciences, focusing on key barriers and opportunities in simulation-based research. This executive summary describes the overall rationale for the conference, conference planning, and consensus-building approaches and outlines the focus of the eight breakout sessions. The consensus outcomes from each breakout session are summarized in proceedings papers published in this issue of Academic Emergency Medicine. Each paper provides an overview of methodologic and knowledge gaps in simulation research and identifies future research targets aimed at improving the safety and quality of healthcare. © 2017 by the Society for Academic Emergency Medicine.

Student Support for EIPBN 2012 Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrow, Reginald C

2013-01-29

The 56th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication (EIPBN), 2012, was held at the Hilton Waikoloa Resort in Waikoloa, Hawaii, May 29 - June 2, 2012. The EIPBN Conference is recognized as the foremost international meeting dedicated to lithographic science and technology and its application to micro and nanofabrication techniques. The conference brought together 483 engineers and scientists from industries and universities from all over the world to discuss recent progress and future trends. Among the emerging technologies that are within the scope of EIPBN is Nanofabrication for Energy Sources along with nanofabrication for themore » realization of low power integrated circuits. Every year, EIPBN provides financial support for students to attend the conference. The students gave oral and poster presentations of their research and many published peer reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences partially supported 41 students from US universities with a $5,000.« less

PREFACE: 7th International Conference on Quantum Theory and Symmetries (QTS7)

NASA Astrophysics Data System (ADS)

Burdík, Čestmír; Navrátil, Ondřej; Pošta, Severin; Schnabl, Martin; Šnobl, Libor

2012-02-01

The Seventh International Conference Quantum Theory and Symmetries (QTS7), organized by the Departments of Mathematics and Physics, Faculty of Nuclear Sciences and Physical Engineering at the Czech Technical University in Prague, the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research and the Institute of Physics at the Academy of Sciences of the Czech Republic, belongs to a successful series of conferences which began at Goslar, Germany in 1999. More recent QTS conferences were held in Poland, Bulgaria, USA and Spain. QTS7 gathered around 300 scientists from all over the world. 136 of the plenary lectures and contributions presented at QTS7 are published in this issue of Journal of Physics: Conference Series. We acknowledge support from the Commission for co-operation with JINR Dubna and grant LA-08002 from the Ministry of Education of the Czech Republic. Čestmír Burdík Chairman Local Organizing Committee

A Multi-Mode Blade Damping Control using Shunted Piezoelectric Transducers with Active Feedback Structure

NASA Technical Reports Server (NTRS)

Choi, Benjamin; Morrison, Carlos; Min, James

2009-01-01

The Structural Dynamics and. Mechanics branch (RXS) is developing smart adaptive structures to improve fan blade damping at resonances using piezoelectric (PE) transducers. In this presentation, only one shunted PE transducer was used to demonstrate active control of multi-mode blade resonance damping on a titanium alloy (Ti-6A1-4V) flat plate model, regardless of bending, torsion, and 2-stripe modes. This work would have a significant impact on the conventional passive shunt damping world because the standard feedback control design tools can now be used to design and implement electric shunt for vibration control. In other words, the passive shunt circuit components using massive inductors and. resistors for multi-mode resonance control can be replaced with digital codes. Furthermore, this active approach with multi patches can simultaneously control several modes in the engine operating range. Dr. Benjamin Choi presented the analytical and experimental results from this work at the Propulsion-Safety and. Affordable Readiness (P-SAR) Conference in March, 2009.

Introduction

NASA Technical Reports Server (NTRS)

Arnold, Steven M.; Wong, Terry T.

2011-01-01

It would be hard to argue against the fact that Integrated Computational Materials Engineering (ICME) is a fast growing discipline within material science and engineering. A quick scan of the proceedings from conferences such as Aeromat, Material Science and Technology, and the TMS Annual Meeting clearly shows it. What began a few years ago as one symposium has grown into multiple ICME related symposia at each of these conferences. As encouraging as the number of symposia being offered is the attendance at the symposia. For example, one of the ICME symposia at MS&T 10, the symposium in which this book is based, had five sessions which culminated in a panel discussion that was standing room only. In addition to the large, annual materials science and engineering conferences, smaller 1 to 2-day conferences/workshops sponsored by government agencies (e.g. AFRL and NIST) on specific aspects of ICME and by universities promoting their ICME work are regularly offered. And arguably the most significant news with regards to ICME and conferences is the July 2011 First World Congress on ICME. This five day TMS sponsored conference, specifically focused on ICME with an international advisory board of ICME leaders, shows how far ICME has spread across the globe. Evidence for the growth of ICME can also be found in Academia. The University Materials Council (UMC) is composed of department heads for material science and engineering from major U.S. and Canadian universities. Meeting twice a year to share best practices in order to strengthen both the engineering content [1] and the educational process, the UMC s agenda for their Spring 2010 meeting was dedicated to ICME [2]. This meeting was held in response to the growing awareness that the universities play a major role in the success of ICME and therefore need to develop ICME curriculum in order to meet that need. To aid educators in the development of ICME courses, NSF is funding a "Summer School" on ICME to be held at the University of Michigan in 2011 [3]. Northwestern University recently announced a MS Certificate Program in ICME [4]. Course work for this certificate begins in the Fall of 2011. Other signs that ICME is growing comes from the formation of ICME initiatives from work that did not start off with ICME in mind. One of the committees in ASM International is the Materials Properties Database Committee (MPDC). In the 2010 meeting of the MPDC, based on a study by ASM, the committee decided that it would create an ICME sub-committee in order to determine how ASM can meet the growing needs of the ICME community [5]. In 1999, the Air Force Research Laboratory (AFRL) created a consortium, the Metals Affordability Initiative (MAI), with members from both industry and government with a goal of reducing the cost and time to market of producing metal parts for aerospace applications [6].

Completion Report on the Corps of Engineers Structural Engineering Conference Held in Portland, Oregon on 23-28 June 1985.

DTIC Science & Technology

1986-03-01

The domes are fabricated from extruded 6061-T6 aluminum, 6 in. deep, wide flange struts, approximately 8 ft long, forming triangular structural...Ice Breaker - snack lines laid out poorly and bar dismantled too quickly. Not a lot of nearby food choices on evening and weekends. 12. Wednesday

WaterlooClarke: TREC 2015 Clinical Decision Support Track

DTIC Science & Technology

2015-11-20

questions (diagnosis, test and treatment articles). The two different full-text search engines we adopted in order to search over the collection of articles...two different search engines using reciprocal rank fusion. The evaluation of the submitted runs using partially marked results of Text Retrieval Conference (TREC) from the previous year shows that the methodologies are promising.

Jobs for Women in Science. A Discussion for the Conference for Educating Women for Science: A Continuous Spectrum.

ERIC Educational Resources Information Center

Hanson, Marlys C.

Opportunities for scientists in the near future will be very good in the fields of energy research and development, both for degreed scientists and for technicians. Geologists, geophysicists, mining engineers, rock mechanics, hydrologists, applied physicists, applied chemists, and nuclear engineers are among the types of personnel needed. These…

NASA Propulsion Engineering Research Center, Volume 2

NASA Technical Reports Server (NTRS)

1994-01-01

This is the second volume in the 1994 annual report for the NASA Propulsion Engineering Research Center's Sixth Annual Symposium. This conference covered: (1) Combustors and Nozzles; (2) Turbomachinery Aero- and Hydro-dynamics; (3) On-board Propulsion systems; (4) Advanced Propulsion Applications; (5) Vaporization and Combustion; (6) Heat Transfer and Fluid Mechanics; and (7) Atomization and Sprays.

PREFACE: 15th International Conference on Thin Films (ICTF-15)

NASA Astrophysics Data System (ADS)

Takai, Osamu; Saito, Nagahiro; Zettsu, Nobuyuki; Cho, Sung-Pyo; Terashima, Chiaki; Ueno, Tomonaga; Sakai, Osamu; Miyazaki, Seiichi; Yoshimura, Kazuki; Akamatsu, Kensuke; Ito, Takahiro; Yogo, Toshinobu; Inoue, Yasushi; Ohtake, Naoto; Yoshida, Tsukasa; Tosa, Masahiro; Takai, Madoka; Fujiwara, Yasufumi; Matsuda, Naoki; Teshima, Katsuya; Seki, Takahiro; Matsunaga, Katsuyuki; Fujita, Daisuke

2013-03-01

The International Conference on Thin Films is the most established conference for all researchers and persons interested in thin films and coatings. It is one of the tri-annual conference series endorsed and co-organized by the Thin Film Division of the International Union for Vacuum Science, Technique and Applications (IUVSTA), a union of national member societies whose role is to stimulate international collaboration in the fields of vacuum science, techniques and applications and related multi-disciplinary topics including solid-vacuum and other interfaces. The 15th International Conference on Thin Films (ICTF-15) is organized by The Vacuum Society of Japan (VSJ) and held at Kyoto TERRSA in Kyoto, Japan on 8-11 November 2011, following the 14th International Conference on Thin Films (ICTF-14), which was held in Ghent, Belgium in 2008. Thin films and coatings are daily becoming increasingly important in the fields of various industries. This International Conference provides a multi-disciplinary forum for recent advances in basic research, development and applications of thin films and coatings. This conference will present a unique opportunity for researchers, engineers and managers to acquire new knowledge of thin films and coatings. We hope that our understanding on thin films and coatings will be deepened through this conference. The conference site, 'Kyoto TERRSA' is located in the historical heart of the old capital Kyoto. Kyoto is an ancient city with a 1200-year history. It was established as Japan's capital under the name 'Heian-kyo' in the year 794. Although many transformations have taken place over the years, Kyoto has always embraced the most advanced standards of the times. It has greatly contributed to the nation's industrial, economic and cultural development. The dauntless spirit of leadership of Kyoto's past as a capital city is still felt here today. Kyoto also preserves the beloved examples of its culture as testimonials of time. This is shown in the ancient temples and shrines, as well as private houses, which are built in styles unique to Kyoto. Furthermore, many festivals, ceremonies and traditional activities reveal the will of this city to convey and develop its 1200-year-old culture. Participants of the conference will also be able to see many world heritage sites in the city. Moreover, November is the best time of year to visit Kyoto. We hope you will enjoy Kyoto very much. We would like to offer our thanks for all the contributions from the members of the International Advisory Committee and Organizing Committee, Symposium Chairs, the Secretary General, the Thin Film Division of IUVSTA (chair: Professor Dr Alberto Tagliaferro), IUVSTA, VSJ and other cooperating societies, and to all of the supporting organizations and enterprises. We would also like to express our thanks to all of the participants, secretariat members and members of the supporting staff. I am very pleased to welcome you to ICTF-15 and Kyoto! Director Professor Dr Osamu Takai Chairperson of ICTF-15 EcoTopia Science Institute, and Department of Materials, Physics and Energy Engineering Graduate School of Engineering Nagoya University Japan

Grand challenges for biological engineering

PubMed Central

Yoon, Jeong-Yeol; Riley, Mark R

2009-01-01

Biological engineering will play a significant role in solving many of the world's problems in medicine, agriculture, and the environment. Recently the U.S. National Academy of Engineering (NAE) released a document "Grand Challenges in Engineering," covering broad realms of human concern from sustainability, health, vulnerability and the joy of living. Biological engineers, having tools and techniques at the interface between living and non-living entities, will play a prominent role in forging a better future. The 2010 Institute of Biological Engineering (IBE) conference in Cambridge, MA, USA will address, in part, the roles of biological engineering in solving the challenges presented by the NAE. This letter presents a brief outline of how biological engineers are working to solve these large scale and integrated problems of our society. PMID:19772647

KSC-02pd0665

NASA Image and Video Library

2002-05-14

KENNEDY SPACE CENTER, FLA. -- During this year's NASA MarsPort Engineering Design Student Competition 2002 conference, the University of Colorado at Boulder presents this display. Participants are presenting papers on engineering trade studies to design optimal configurations for a MarsPort Deployable Greenhouse for operation on the surface of Mars. Judges in the competition were from KSC, Dynamac Corporation and Florida Institute of Technology. The winning team's innovative ideas will be used by NASA to evaluate and study other engineering trade concepts.

Proceedings: 1995 SO{sub 2} control symposium. Volume 1, Sessions 1, 2, 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

Proceedings: 1995 SO{sub 2} control symposium. Volume 4, Sessions Ba, 8b

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

Microbial enhancement of oil recovery: Recent advances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Premuzic, E.T.; Woodhead, A.D.; Vivirito, K.J.

1992-01-01

During recent years, systematic, scientific, and engineering effort by researchers in the United States and abroad, has established the scientific basis for Microbial Enhanced Oil Recovery (MEOR) technology. The successful application of MEOR technology as an oil recovery process is a goal of the Department of Energy (DOE). Research efforts involving aspects of MEOR in the microbiological, biochemical, and engineering fields led DOE to sponsor an International Conference at Brookhaven National Laboratory in 1992, to facilitate the exchange of information and a discussion of ideas for the future research emphasis. At this, the Fourth International MEOR Conference, where international attendeesmore » from 12 countries presented a total of 35 papers, participants saw an equal distribution between research'' and field applications.'' In addition, several modeling and state-of-the-art'' presentations summed up the present status of MEOR science and engineering. Individual papers in this proceedings have been process separately for inclusion in the Energy Science and Technology Database.« less

Microbial enhancement of oil recovery: Recent advances. Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Premuzic, E.T.; Woodhead, A.D.; Vivirito, K.J.

1992-12-31

During recent years, systematic, scientific, and engineering effort by researchers in the United States and abroad, has established the scientific basis for Microbial Enhanced Oil Recovery (MEOR) technology. The successful application of MEOR technology as an oil recovery process is a goal of the Department of Energy (DOE). Research efforts involving aspects of MEOR in the microbiological, biochemical, and engineering fields led DOE to sponsor an International Conference at Brookhaven National Laboratory in 1992, to facilitate the exchange of information and a discussion of ideas for the future research emphasis. At this, the Fourth International MEOR Conference, where international attendeesmore » from 12 countries presented a total of 35 papers, participants saw an equal distribution between ``research`` and ``field applications.`` In addition, several modeling and ``state-of-the-art`` presentations summed up the present status of MEOR science and engineering. Individual papers in this proceedings have been process separately for inclusion in the Energy Science and Technology Database.« less

TULIPs: tunable, light-controlled interacting protein tags for cell biology.

PubMed

Strickland, Devin; Lin, Yuan; Wagner, Elizabeth; Hope, C Matthew; Zayner, Josiah; Antoniou, Chloe; Sosnick, Tobin R; Weiss, Eric L; Glotzer, Michael

2012-03-04

Naturally photoswitchable proteins offer a means of directly manipulating the formation of protein complexes that drive a diversity of cellular processes. We developed tunable light-inducible dimerization tags (TULIPs) based on a synthetic interaction between the LOV2 domain of Avena sativa phototropin 1 (AsLOV2) and an engineered PDZ domain (ePDZ). TULIPs can recruit proteins to diverse structures in living yeast and mammalian cells, either globally or with precise spatial control using a steerable laser. The equilibrium binding and kinetic parameters of the interaction are tunable by mutation, making TULIPs readily adaptable to signaling pathways with varying sensitivities and response times. We demonstrate the utility of TULIPs by conferring light sensitivity to functionally distinct components of the yeast mating pathway and by directing the site of cell polarization.

EDITORIAL: Focus on the neural interface Focus on the neural interface

NASA Astrophysics Data System (ADS)

Durand, Dominique M.

2009-10-01

The possibility of an effective connection between neural tissue and computers has inspired scientists and engineers to develop new ways of controlling and obtaining information from the nervous system. These applications range from `brain hacking' to neural control of artificial limbs with brain signals. Notwithstanding the significant advances in neural prosthetics in the last few decades and the success of some stimulation devices such as cochlear prosthesis, neurotechnology remains below its potential for restoring neural function in patients with nervous system disorders. One of the reasons for this limited impact can be found at the neural interface and close attention to the integration between electrodes and tissue should improve the possibility of successful outcomes. The neural interfaces research community consists of investigators working in areas such as deep brain stimulation, functional neuromuscular/electrical stimulation, auditory prostheses, cortical prostheses, neuromodulation, microelectrode array technology, brain-computer/machine interfaces. Following the success of previous neuroprostheses and neural interfaces workshops, funding (from NIH) was obtained to establish a biennial conference in the area of neural interfaces. The first Neural Interfaces Conference took place in Cleveland, OH in 2008 and several topics from this conference have been selected for publication in this special section of the Journal of Neural Engineering. Three `perspectives' review the areas of neural regeneration (Corredor and Goldberg), cochlear implants (O'Leary et al) and neural prostheses (Anderson). Seven articles focus on various aspects of neural interfacing. One of the most popular of these areas is the field of brain-computer interfaces. Fraser et al, report on a method to generate robust control with simple signal processing algorithms of signals obtained with electrodes implanted in the brain. One problem with implanted electrode arrays, however, is that they can fail to record reliably neural signals for long periods of time. McConnell et al show that by measuring the impedance of the tissue, one can evaluate the extent of the tissue response to the presence of the electrode. Another problem with the neural interface is the mismatch of the mechanical properties between electrode and tissue. Basinger et al use finite element modeling to analyze this mismatch in retinal prostheses and guide the design of new implantable devices. Electrical stimulation has been the method of choice to activate externally the nervous system. However, Zhang et al show that a novel dual hybrid device integrating electrical and optical stimulation can provide an effective interface for simultaneous recording and stimulation. By interfacing an EMG recording system and a movement detection system, Johnson and Fuglevand develop a model capable of predicting muscle activity during movement that could be important for the development of motor prostheses. Sensory restoration is another unsolved problem in neural prostheses. By developing a novel interface between the dorsal root ganglia and electrodes arrays, Gaunt et al show that it is possible to recruit afferent fibers for sensory substitution. Finally, by interfacing directly with muscles, Jung and colleagues show that stimulation of muscles involved in locomotion following spinal cord damage in rats can provide an effective treatment modality for incomplete spinal cord injury. This series of articles clearly shows that the interface is indeed one of the keys to successful therapeutic neural devices. The next Neural Interfaces Conference will take place in Los Angeles, CA in June 2010 and one can expect to see new developments in neural engineering obtained by focusing on the neural interface.

PREFACE: 4th National Conference on Processing and Characterization of Materials (NCPCM 2014)

NASA Astrophysics Data System (ADS)

2015-02-01

This volume contains selected full length technical papers amongst forty oral presentations made in the 4th National Conference on Processing and Characterization of Materials (NCPCM 2014), NIT Rourkela, Rourkela, Odisha, India, December 5 - 6, 2014. The first conference of the NCPCM series was held at the same place in December 2011. Seeing the enthusiasm of the participants, it was decided to organize such conference in Rourkela every year. The basic idea was to establish a periodical national forum for multi-scale approaches in processing and characterization of materials in the eastern part of India. The conference NCPCM 2014 has successfully carried the tradition of previous conferences; more than fifty participants from twenty different organizations across India have registered. The conference was consisted of six technical sessions of about fifty contributory talks along with three keynote lectures. A metallography contest was also organized during the event. Out of these, thirty four best peer-reviewed contributions are published in this volume of IOP Conference Series: Materials Science and Engineering. We would like to thank all the contributors, members of the organizing committee, session chairs as well as colleagues and students who helped with the preparation of the conference and, particularly, with the preparation of this volume. We convey our heartiest gratitude to the sponsors and advertisers for their contribution.

03pd1540

NASA Image and Video Library

2003-05-06

May 6, 2003. Star City, Russia. Expedition Six Flight Engineer Nikolai Budarin speaks during a Press Conference at the Gagarin Cosmonaut Training Center in Star City, Russia. Photo Credit: "NASA/Bill Ingalls"

Bibliography of Research Reports and Publications Issued by the Human Engineering Division, January 1987 - December 1993

DTIC Science & Technology

1994-03-01

cues in an aircraft simulator. AMAA Flight Simulation Technologies Conference, 63- 70. Marasco , P. L., & Dereniak, E. L. (1993). Uncooled infrared...Space Center, TX: National Aeronautics and Space Administration. Task, H. L., Hartman, R. T., Marasco , P. L., & Zobel, A. R. (1993). Methods for...Aerospace VIIJ Conference, 2, 623-644. Marasco , P. L., & Dereniak, E. L. (1993). Uncooled infrared sensor performance. In B. F. Andresen, & F. D

Interwell exciton dispersion engineering, coherent phonons generation and optical detectionof exciton condensate

NASA Astrophysics Data System (ADS)

Hildebrandt, Stefan

2004-01-01

Conference Reports are meant to offer an authoritative view on a recently held scientific meeting rather than a comprehensive list of the conference presentations. Authors are invited to describe what they feel were the most interesting contributions.Changing the culture of science and publication was the tenor at the IUPAP Workshop on Scientific Misconduct and the Role of Physics Journals in its Investigation and Prevention, recently held in London.

The Freshman Year in Science and Engineering: Old Problems, New Perspectives for Research Universities. Report of a Conference (Ann Arbor, Michigan, April 6-7, 1990).

ERIC Educational Resources Information Center

Wineke, William R.; Certain, Phillip

The goal of the conference reported in this document was to initiate major revitalization of freshman science by bringing together individuals who have been working to improve introductory courses with research faculty who may or may not have been actively involved in the teaching of these courses. This report tries to capture the spirit and the…

Gordon Research Conference on Composites (1984) Held at Santa Barbara, California on January 16-20, 1984.

DTIC Science & Technology

1984-12-01

AUTNoON(e) 4. CONTRACT OR GRANT NUMEER(s) Richard J. Farris DAAG29-83-M-O415 Ln S. oEIroOMING ORGANIZATION NAME ANO ADORESS 10. PROGRAM ELEMENT... Richard J. Farris, Professor Polymer Science and Engineering Department University of Massachusetts, Amherst Chairman 1984 Gordon Research Conference...Hotel, Santa Barbara, California Richard J. Farris, Chairperson 1. Edmund Fitzgerald, Vice-Chairperson Monday Morning, Januaty 16 Discussion Leader

Expedition_55_Education_In-flight_NSTA_Conference-Atlanta_075_0940_628903

NASA Image and Video Library

2018-03-16

SPACE STATION CREWMEMBER DISCUSSES LIFE IN SPACE WITH THE NATION’S SCIENCE TEACHERS------------------------------------------ Aboard the International Space Station, Expedition 55 Flight Engineer Scott Tingle of NASA discussed life and research on the orbital outpost during an in-flight event March 16 with educators gathered in Atlanta at the National Science Teachers Association conference. Tingle is in the midst of a five-and-a-half month mission on the orbital outpost.

Genetically engineered livestock for biomedical models.

PubMed

Rogers, Christopher S

2016-06-01

To commemorate Transgenic Animal Research Conference X, this review summarizes the recent progress in developing genetically engineered livestock species as biomedical models. The first of these conferences was held in 1997, which turned out to be a watershed year for the field, with two significant events occurring. One was the publication of the first transgenic livestock animal disease model, a pig with retinitis pigmentosa. Before that, the use of livestock species in biomedical research had been limited to wild-type animals or disease models that had been induced or were naturally occurring. The second event was the report of Dolly, a cloned sheep produced by somatic cell nuclear transfer. Cloning subsequently became an essential part of the process for most of the models developed in the last 18 years and is stilled used prominently today. This review is intended to highlight the biomedical modeling achievements that followed those key events, many of which were first reported at one of the previous nine Transgenic Animal Research Conferences. Also discussed are the practical challenges of utilizing livestock disease models now that the technical hurdles of model development have been largely overcome.

Proceedings of Synthetic Biology: Engineering, Evolution and Design (SEED) Conference 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silver, Pamela; Flach, Evan

Synthetic Biology is an emerging discipline that seeks to accelerate the process of engineering biology. As such, the tools are broadly applicable to application areas, including chemicals and biofuels, materials, medicine and agriculture. A characteristic of the field is to look holistically at cellular design, from sensing and genetic circuitry to the manipulation of cellular processes and actuators, to controlling metabolism, to programming multicellular behaviors. Further, the types of cells that are manipulated are broad, from in vitro systems to microbes and fungi to mammalian and plant cells and living animals. Many of the projects in synthetic biology seek tomore » move biochemical functions across organisms. The field is highly interdisciplinary with faculty and students spread across departments that focus on engineering (biological, chemical, electrical, mechanical, civil, computer science) and basic science (biology and systems biology, chemistry, physics). While there have been many one-off workshops and meeting on synthetic biology, the 2014 Synthetic Biology: Engineering, Evolution and Design (SEED) was the first of an annual conference series that serves as a reliable place to pull together the involved disciplines in order to organize and exchange advances in the science and technology in the field. Further, the SEED conferences have a strong focus on industry, with many companies represented and actively participating. A number of these companies have started major efforts in synthetic biology including large companies (e.g., Pfizer, Novartis, Dow, Dupont, BP, Total), smaller companies have recently gone public (e.g., Amyris, Gevo, Intrexon), and many start-ups (e.g., Teslagen, Refactored Materials, Pivot, Genomatica). There are a number of loosely affiliated Synthetic Biology Centers, including ones at MIT, Boston University, UCSD, UCSF, UC-Berkeley, Imperial College, Oxford, and ETH. SEED 2015 will serve as the primary meeting at which international synthetic biology centers and related infrastructure (synthesis/software/foundries) meet to discuss technology, standards, and education. SEED2015 will be the second in an annual series of meeting held to bring researchers from industry and academia in the area of Synthetic Biology. The first SEED conference was highly successful, attracting 285 attendees with varying backgrounds from academia, industry and government. The SEED series provides leadership in the development of the field of synthetic biology and serves to broaden the participants in the field by appealing to broad sectors in industry and providing a means for young investigators and those outside of the field to participate. Further, the series closely integrates with groups such as the SBCC to provide a means by which the synthetic biology community can communicate with policy makers. Further, we will pursue making the meeting the center for the exchange of educational materials as centers for synthetic biology emerge globally. Proceedings will be published each year in the journal ACS Synthetic Biology. After each SEED meeting, surveys are distributed to assess the success of the conference and to help guide changes year-to-year. The diverse application areas further extend the expertise needed from people in areas such as plant biology, agriculture and soil science, environmental science, medicine, and the chemical industry. These areas could have a widespread impact on society in a number of ways. For example, the CRISPR/Cas9 system that serves to immunize bacteria from phage has provided the fundamental chemistry that is used to edit the genomes of diverse organisms, including human stem cells, crop plants, and livestock animals.« less

Environmental engineering: A profession in transition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mackay, D.

1996-11-01

This 50th Industrial Waste Conference at Purdue gives one an opportunity and excuse to reflect on progress in Environmental Engineering and speculate on future changes. The author suggests that during this 50-year period Environmental Engineering has emerged as a discrete and creditable body of knowledge, practice, and academic study. In this review he presents a personal view of the evolution of Environmental Engineering and its present status. He also suggests some future directions and principles which may prove useful, especially in the academic world. The paper discusses the sphere of the environmental engineer, the social incentive, the academic curriculum, environmentalmore » engineers and society, the chlorine controversy, research, and the electronic revolution.« less

The role of engineering in the flight equipment purchasing process

NASA Technical Reports Server (NTRS)

1977-01-01

The role of the airline engineering department in the flight equipment acquisition process is examined. The data for the study was collected from six airlines. The principal findings of the study include: (1) engineering activities permeate, but do not dominate the airline flight equipment decision process. (2) The principal criterion for the flight equipment acquisition decision is return on investment. (3) The principal sources of information for the airline engineering departments in the monitoring process are the manufacturers of equipment. Subsidiary information sources include NASA publications and conferences, among others and (4) The engineering department is the principal communication channel for technical information.

75 FR 8999 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

.... Methodological findings may be presented externally in technical papers at conferences, published in the... represent several methodological improvement projects. \\2\\ This number refers to the science, engineering...

Signaling threat: how situational cues affect women in math, science, and engineering settings.

PubMed

Murphy, Mary C; Steele, Claude M; Gross, James J

2007-10-01

This study examined the cues hypothesis, which holds that situational cues, such as a setting's features and organization, can make potential targets vulnerable to social identity threat. Objective and subjective measures of identity threat were collected from male and female math, science, and engineering (MSE) majors who watched an MSE conference video depicting either an unbalanced ratio of men to women or a balanced ratio. Women who viewed the unbalanced video exhibited more cognitive and physiological vigilance, and reported a lower sense of belonging and less desire to participate in the conference, than did women who viewed the gender-balanced video. Men were unaffected by this situational cue. The implications for understanding vulnerability to social identity threat, particularly among women in MSE settings, are discussed.

Antibody engineering and therapeutics conference. The annual meeting of the antibody society, Huntington Beach, CA, December 7-11, 2014.

PubMed

Larrick, James W; Parren, Paul W H I; Huston, James S; Plückthun, Andreas; Bradbury, Andrew; Tomlinson, Ian M; Chester, Kerry A; Burton, Dennis R; Adams, Gregory P; Weiner, Louis M; Scott, Jamie K; Alfenito, Mark R; Veldman, Trudi; Reichert, Janice M

2014-01-01

The 25th anniversary of the Antibody Engineering & Therapeutics Conference, the Annual Meeting of The Antibody Society, will be held in Huntington Beach, CA, December 7-11, 2014. Organized by IBC Life Sciences, the event will celebrate past successes, educate participants on current activities and offer a vision of future progress in the field. Keynote addresses will be given by academic and industry experts Douglas Lauffenburger (Massachusetts Institute of Technology), Ira Pastan (National Cancer Institute), James Wells (University of California, San Francisco), Ian Tomlinson (GlaxoSmithKline) and Anthony Rees (Rees Consulting AB and Emeritus Professor, University of Bath). These speakers will provide updates of their work, placed in the context of the substantial growth of the industry over the past 25 years.

Literature Use in Engineering and Computer Science Research: An Analysis of Works Cited in Dissertations and Theses

ERIC Educational Resources Information Center

Fransen, Janet

2012-01-01

Any engineering librarian will tell you that their researchers' literature needs differ from researchers in other disciplines: Books are used less, and conference papers more, than in humanities disciplines. This study analyzes literature cited in theses and dissertations submitted over a three-year period by students in three departments of the…

75 FR 28820 - Notice of Public Meeting by Teleconference Concerning Heavy Duty Diesel Engine Consent Decrees

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... DEPARTMENT OF JUSTICE Notice of Public Meeting by Teleconference Concerning Heavy Duty Diesel Engine Consent Decrees The Department of Justice and the Environmental Protection Agency will hold a public meeting on June 14, 2010 at 3 p.m. by telephone conference. The subject of the meeting will be implementation of the provisions of the seven...

12th Annual Science and Engineering Technology Conference/DoD TECH Exposition

DTIC Science & Technology

2011-06-23

compound when planning horizons grow: long design - test - build-field-adapt lead-times exacerbate uncertain futures problems, overload designs , and...ERS Environment ERS: Tools and Technologies to Facilitate Adaptability & Trustability 4. Tying design , physical and computational testing 6...science, engineering concepts, processes, and design tools to: • Continuously coordinate design , testing , and production with warfighter review to

Bio-Nanotechnology Infrastructure and Technology Oriented Research

DTIC Science & Technology

2008-07-17

4) dissemination of the accomplishments through filing patents, publishing refereed papers and presenting at international conferences and meetings...NUMBER 6. AUTHOR(S) Kinzy Jones 5d. PROJECT NUMBER Florida International University ADVANCED MATERIALS ENGINEERING RESERACH INSTITUTE 5e...University ADVANCED MATERIALS ENGINEERING RESERACH INSTITUTE 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES

Early Training Estimation System

DTIC Science & Technology

1980-08-01

first year efforts in CTES development were Cecil Wakelin, Gavin Livingstone, Ray Walsh« Peter Weddle, David Herlihy, Laurel Brown, Drs. Paul Ronco...and Society, 1980, pp. 1067-1974. David , J., Price, J. Successful communication in full scale engineering development statements of work. Air Force...1980, U.S. Army Engineering Laboratory. Shrier , S. Algorithms for system design. Proceedings of the International Conference on Cybernetics and

13th Annual Systems Engineering Conference: Tues- Wed

DTIC Science & Technology

2010-10-28

greater understanding/documentation of lessons learned – Promotes SE within the organization • Justification for continued funding of SE Infrastructure...educational process – Addresses the development of innovative learning tools, strategies, and teacher training • Research and Development – Promotes ...technology, and mathematics • More commitment to engaging young students in science, engineering, technology and mathematics • More rigor in defining

PREFACE: International Conference on Solid Films and Surfaces (ICSFS 2014)

NASA Astrophysics Data System (ADS)

Achete, C. A.; Almeida, C. M.; Cremona, M.; Rocca, M.; Stavale, F.

2015-03-01

Foreword The 17th ICSFS took place at the wonderful city of Rio de Janeiro, Brazil from the 8th to the 11th of September, 2014. The conference focused on recent advances in controlling and characterizing the physical and chemical properties of films and surfaces, with a particular emphasis on materials for electronic, photonic and spintronic applications. In addition, themes of bio-functionalized structures and devices were strongly discussed in the ICSFS, covering interdisciplinary nano and nano-bio science and technology. The conference has promoted, in various sub-fields of materials surfaces and thin films, an excellent forum for exchange of ideas, presentation of technical achievements and discussion of future directions in the field. In this volume of the IOP Conference Series: Materials Science and Engineering we are glad to present 11 peer-reviewed ICSFS contributing papers. The cross-disciplinary nature of conference topics is clearly reflected in these Proceedings' contents. The themes discussed ranged from those close to more traditional condensed matter physics, such as semiconductor surfaces to physical chemistry related issues. The Proceedings were organized in accordance with contributions presented at the Conference. We were glad with the presence of over 160 participants, including 24 invited and plenary talks and over 50 oral contributions. We strongly believe that these Proceedings will be useful for a wide audience of those interested in basic and applied surfaces and thin solid interfaces. Acknowledgment We would like to acknowledge the hard work, professional skills and efficiency of the team which oversaw the general organization, particularly of Dicom (Social Communication Division) from the National Institute of Metrology, Quality and Technology, Inmetro (Brazil). We also would like to thank all the invited speakers and session chairs for making the meeting such a great success. The Conference was supported and sponsored by Academia Brasileira de Ciências, CNPq, CAPES, Inmetro, FEI Company and Carl-Zeiss Company. We are grateful for the commercial exhibition of several leading instrument companies that provided great financial support. We thank Altmann, Bruker, CAMECA, Edwards, Horiba, M&M Vácuo, Oxford Instruments, Renishaw, RHK Technology, and SPECS.

System Theory and Physiological Processes.

PubMed

Jones, R W

1963-05-03

Engineers and physiologists working together in experimental and theoretical studies predict that the application of system analysis to biological processes will increase understanding of these processes and broaden the base of system theory. Richard W. Jones, professor of electrical engineering at Northwestern University, Evanston, Illinois, and John S. Gray, professor of physiology at Northwestern's Medical School, discuss these developments. Their articles are adapted from addresses delivered in Chicago in November 1962 at the 15th Annual Conference on Engineering in Medicine and Biology.

S.E.E.ing the Future: Science, Engineering and Education. Commentary from the Scientific Grassroots. A White Paper on the Issues and Need for Public Funding of Basic Science and Engineering Research.

ERIC Educational Resources Information Center

Jemison, Mae C., Ed.

This document reports on the results of an ad hoc workshop called "S.E.E.ing the Future: Science Engineering and Education" Held at Dartmouth College in November of 2000 and sponsored by Dartmouth, the National Science Foundation, the Dow Chemical Company, and Science Service of Washington, DC. This transdisciplinary conference was one of a series…

Corps of Engineers Structural Engineering Conference Held in St. Johns County, Florida on 8-12 July 1991. Volume 1

DTIC Science & Technology

1992-12-01

ville, surveying personnel and surveyors at fects from the concrete heat of hydration, the Engineering Technology Laboratory and solar radiation, and...CESEC91 Schuitz 317 LA-J 4 zz C.I.A 4 -r Lfl- ST. PEER ST 0’ Uz M 0; ~ w z d L 0l Fra lwý CLu V)C,0 W V) -j V- u0) 318r Bctjt CEE9 A304MC. PANAlS - ELE

Joint Conference on Marine Safety and Environment/Ship Production (1st), held 1-5 June 1992

DTIC Science & Technology

1992-06-05

have to face fresh challenges in the future. But as long as we regard these challenges as opportunities, we will remain masters of our own destiny ...has recently published for discussion an “ Embryo Code of Practice” (1991) entitled “Engineers and Risk Issues”. Thii draft Code is intended to...Department of Energy5 Her Majesty’s Stationery Office. Cm.1310. The Engineering Counci1 (1991) Engineers and Risk Issues : An Embryo Code of Practice. London

PREFACE: First International Meeting on Applied Physics (APHYS-2003)

NASA Astrophysics Data System (ADS)

Méndez-Vilas, A.; Chacón, R.

2005-01-01

This special issue of Physica Scripta contains papers presented at the 1st International Meeting on Applied Physics (APHYS-2003), held in Badajoz (Spain), from 13th to 18th October 2003, and more specifically, selected papers presented during the conference sessions mainly on Applied Optics, Laser Physics, Ultrafast Phenomena, Optical Materials, Semiconductor Materials and Devices, Optoelectronics, Quantum Electronics and Applied Solid State Physics-Chemistry. APHYS-2003 was born as an attempt to create a new international forum on Applied Physics in Europe. Since Applied Physics is not really a branch of Physics, but the application of all the branches of Physics to the broad realms of practical problems in Science, Engineering and Industry, this conference was a truly multi and inter-disciplinary event. The organizers called for papers relating Physics with other sciences such as Biology, Chemistry, Information Science, Medicine, etc, or relating different Physics areas, and aimed at solving practical problems. In other words, the Conference was specifically interested in reports applying the techniques, the training, and the culture of Physics to research areas usually associated with other scientific and engineering disciplines. It was extremely rewarding that over 800 researchers, from over 65 countries, attended the conference, where more than 1000 research papers were presented. We feel really proud of this excellent response obtained (in number and quality), for this first edition of the conference. We are very grateful to all the members of the Organizing Committee, for the hard work done for the preparation of the Conference (which began one year before the conference start), and to the members of the International Advisory Committee, for the valuable contribution to the evaluation of submitted works. Also thank to the referees for the excellent work done in the revision of submitted papers. Finally, we would like to thank the Department of Physics of the University of Extremadura, for their support, and the Regional Government (Junta de Extremadura/Consejería de Educación, Ciencia y Tecnología), as well as INNOVA Instrumentación, for sponsoring the Conference.

PREFACE: Astronomy at High Angular Resolution 2011: The central kiloparsec in galactic nuclei

NASA Astrophysics Data System (ADS)

Iserlohe, Christof; Karas, Vladimir; Krips, Melanie; Eckart, Andreas; Britzen, Silke; Fischer, Sebastian

2012-07-01

We are pleased to present the proceedings from the Astronomy at High Angular Resolution 2011: The central kiloparsec in galactic nuclei conference. The conference took place in the Physikzentrum of the Deutsche Physikalische Gesellschaft (DPG), Bad Honnef, Germany, from 28 August to 2 September 2011. It was the second conference of this kind, following the Astronomy at High Angular Resolution conference held in Bad Honnef, three years earlier in 2008. The main objective of the conference was to frame the discussion of the broad range of physical processes that occur in the central 100pc of galactic nuclei. In most cases, this domain is difficult to probe through observations. This is mainly because of the lack of angular resolution, the brightness of the central engine and possible obscurations through dust and gas, which play together in the central regions of host galaxies of galactic nuclei within a broad range of activity. The presence of large amounts of molecular and atomic (both neutral and ionized) gas, dust and central engines with outflows and jets implies that the conditions for star formation in these regions are very special, and probably different from those in the disks of host galaxies. Numerous presentations covering a broad range of topics, both theoretical and experimental, those related to research on Active Galactic Nuclei and on a wide range of observed wavelengths were submitted to the Scientific Organizing Committee. Presentations have been grouped into six sessions: The nuclei of active galaxies The Galactic Center The immediate environment of Super Massive Black Holes The physics of nuclear jets and the interaction of the interstellar medium The central 100pc of the nuclear environment Star formation in that region The editors thank all participants of the AHAR 2011 conference for their enthusiasm and their numerous and vivid contributions to this conference. We would especially like to thank John Hugh Seiradakis from the Aristotle University of Thessaloniki in Greece for giving the dinner talk on the most astounding ancient Antikythera mechanism. We would also like to thank Victor Gomer and the staff of the Physikzentrum of the Deutsche Physikalische Gesellschaft in Bad Honnef where the conference took place. Last but not least we would like to thank all unnamed helpers, without whom the organisation of this conference would not have been possible. Financial support for this conference was granted by the Deutsche Forschungsgemeinschaft (DFG) Sonderforschungsbereich project number SFB 956. We also acknowledge support from the European Community Framework Programme 7, Advanced Radio Astronomy in Europe, grant agreement no. 227290. Christof Iserlohe, Vladimir Karas, Melanie Krips, Andreas Eckart, Silke Britzen and Sebastian Fischer The Editors Conference photograph Conference Group Photo, 1 September 2011 The PDF also contains additional photographs from the conference and the Contents of the Proceedings.

PREFACE: Processing, Microstructure and Performance of Materials

NASA Astrophysics Data System (ADS)

Chiu, Yu Lung; Chen, John J. J.; Hodgson, Michael A.; Thambyah, Ashvin

2009-07-01

A workshop on Processing, Microstructure and Performance of Materials was held at the University of Auckland, School of Engineering, on 8-9 April 2009. Organised by the Department of Chemical and Materials Engineering, University of Auckland, this meeting consisted of international participants and aimed at addressing the state-of-the-art research activities in processing, microstructure characterization and performance integrity investigation of materials. This two-day conference brought together scientists and engineers from New Zealand, Australia, Hong Kong, France, and the United Kingdom. Undoubtedly, this diverse group of participants brought a very international flair to the proceedings which also featured original research papers on areas such as Materials processing; Microstructure characterisation and microanalysis; Mechanical response at different length scales, Biomaterials and Material Structural integrity. There were a total of 10 invited speakers, 16 paper presentations, and 14 poster presentations. Consequently, the presentations were carefully considered by the scientific committee and participants were invited to submit full papers for this volume. All the invited paper submissions for this volume have been peer reviewed by experts in the various fields represented in this conference, this in accordance to the expected standards of the journal's Peer review policy for IOP Conference Series: Materials Science and Engineering. The works in this publication consists of new and original research as well as several expert reviews of current state-of-the art technologies and scientific developments. Knowing some of the real constraints on hard-copy publishing of high quality, high resolution images, the editors are grateful to IOP Publishing for this opportunity to have the papers from this conference published on the online open-access platform. Listed in this volume are papers on a range of topics on materials research, including Ferguson's high strain rate deformation studies of wood, Nebosky et al's manufacturing methods of tantalum metal implant material, Tan et al's self-healing materials, Gabbitas et al's work on titanium alloys and others. Also among the review papers, topics include that on small-scale plasticity by Ng and Ngan showing how distinct plasticity between micro- and macro-specimens can be interpreted by size-dependent dislocation activities; and the latest advancements in electron microscopy, with a special emphasis on its application to materials engineering. Niche areas such as cartilage, dental and biomineralisation research are also included in several of the papers, as a recognition of the rapidly growing interest in biological materials research and its clinical relevance. Decidedly a resounding success, the conference and this volume owes much to all the individuals, organising committee, helpers and participants, who have taken time out to put in the effort of organising the meeting, preparing the presentations and writing the papers.

PREFACE: Advances in Cryogenic Engineering: Proceedings of the Cryogenic Engineering Conference (CEC) 2015

NASA Astrophysics Data System (ADS)

Kittel, Peter; Sumption, Michael

2015-12-01

The 2015 joint Cryogenic Engineering and International Cryogenic Materials Conferences were held from June 28 through July 2 at the JW Marriott Starr Pass Resort & Spa in Tucson, Arizona. As at past conferences, the international scope of these meetings was strongly maintained with 26 countries being represented by 561 attendees who gathered to enjoy the joint technical programs, industrial exhibits, special events, and natural beauty of the surrounding Sonoran Desert. The program for the joint conferences included a total of 363 presentations in the plenary, oral, and poster sessions. Four plenary talks gave in-depth discussions of the readiness of bulk superconductors for applications, the role of cryogenics in the development of the hydrogen bomb and vice versa, superconducting turboelectric aircraft propulsion and UPS's uses and plans for LNG fuel. Contributed papers covered a wide range of topics including large-scale and small-scale cryogenics, advances in superconductors and their applications. In total, 234 papers were submitted for publication of which 224 are published in these proceedings. The CEC/ICMC Cryo Industrial Expo displayed the products and services of 38 industrial exhibitors and provided a congenial venue for a reception and refreshments throughout the week as well as the conference poster sessions. Spectacular panoramic views of Saguaro National Park, the Sonoran Desert and the night time lights of Tucson set the stage for a memorable week in the American Southwest. Conference participants enjoyed scenic hikes and bike rides, exploring Old Town Tucson, hot and spicy southwestern cuisine, a nighttime lightning display and a hailstorm. Conference Chairs for 2015 were Peter Kittel, Consultant, for CEC and Michael Sumption from The Ohio State University, Materials Science Department for ICMC. Program Chairs were Jonathan Demko from the LeTourneau University for CEC and Timothy Haugan from AFRL/RQQM for ICMC, assisted by the CEC Program Vice Chair, Jennifer Marquardt from Ball Aerospace & Technologies Corp. The Exhibit chair was Richard Dausman of Cryomech, Inc. who also served as Publicity Chair. Finally, Awards Chairs were Ray Radebaugh from the National Institute of Standards and Technology for CEC and David Cardwell from the University of Cambridge, United Kingdom, for ICMC. On June 28, the Cryogenic Society of America presented three short courses: Cryocooler Fundamentals and Space Applications, a full day course given by Dr. Ray Radebaugh and Dr. Ron Ross, Superconducting Radio Frequency Systems, a half-day course by Dr. Rong-Li Geng; and Practical Thermometry and Instrumentation, a half-day course by Dr. Scott Courts. The courses were well attended and catered to both seasoned professionals and newcomers to cryogenics. The able leadership of Paula Pair with the hardworking staff from Centennial Conferences provided outstanding conference management and operations. Thank you Paula and staff for a truly outstanding and memorable conference experience! Finally, to the attendees, authors, editors, and reviewers whose combined efforts have contributed to these proceedings, thanks very much to you all. We look forward to the next CEC/ICMC in Madison, Wisconsin, July 9 - 13, 2017.

Creating to understand - developmental biology meets engineering in Paris.

PubMed

Kicheva, Anna; Rivron, Nicolas C

2017-03-01

In November 2016, developmental biologists, synthetic biologists and engineers gathered in Paris for a meeting called 'Engineering the embryo'. The participants shared an interest in exploring how synthetic systems can reveal new principles of embryonic development, and how the in vitro manipulation and modeling of development using stem cells can be used to integrate ideas and expertise from physics, developmental biology and tissue engineering. As we review here, the conference pinpointed some of the challenges arising at the intersection of these fields, along with great enthusiasm for finding new approaches and collaborations. © 2017. Published by The Company of Biologists Ltd.

Multimodal nonlinear nanophotonics (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kivshar, Yuri S.

2017-05-01

Nonlinear nanophotonics is a rapidly developing field of research with many potential applications for the design of nonlinear nanoantennas, light sources, nanolasers, and ultrafast miniature metadevices. A tight confinement of the local electromagnetic fields in resonant photonic nanostructures can boost nonlinear optical effects, thus offering versatile opportunities for the subwavelength control of light. To achieve the desired functionalities, it is essential to gain flexible control over the near- and far-field properties of nanostructures. To engineer nonlinear scattering from resonant nanoscale elements, both modal and multipolar control of the nonlinear response are widely exploited for enhancing the near-field interaction and optimizing the radiation directionality. Motivated by the recent progress of all-dielectric nanophotonics, where the electric and magnetic multipolar contributions may become comparable, here we review the advances in the recently emerged field of multipolar nonlinear nanophotonics, starting from earlier relevant studies of metallic and metal-dielectric structures supporting localized plasmonic resonances to then discussing the latest results for all-dielectric nanostructures driven by Mie-type multipolar resonances and optically induced magnetic response. These recent developments suggest intriguing opportunities for a design of nonlinear subwavelength light sources with reconfigurable radiation characteristics and engineering large effective optical nonlinearities at the nanoscale, which could have important implications for novel nonlinear photonic devices operating beyond the diffraction limit.

National Conference on Mining-Influenced Waters: Approaches for Characterization, Source Control and Treatment

EPA Science Inventory

The conference goal was to provide a forum for the exchange of scientific information on current and emerging approaches to assessing characterization, monitoring, source control, treatment and/or remediation on mining-influenced waters. The conference was aimed at mining remedi...

Conference on Fire Resistant Materials: A compilation of presentations and papers

NASA Technical Reports Server (NTRS)

Kourtides, D. A. (Editor); Johnson, G. A. (Editor)

1979-01-01

The proceedings of the NASA IRE Resistant Materials Engineering (FIREMEN) Program held at Boeing Commercial Airplane Company, Seattle, Washington, on March 1-2, 1979 are reported. The conference was to discuss the results of research by the National Aeronautics and Space Administration in the field of aircraft fire safety and fire-resistant materials. The program topics include the following: (1) large-scale testing; (2) fire toxicology; (3) polymeric materials; and (4) fire modeling.

Conference on Fire Resistant Materials (FIREMEN): A compilation of presentations and papers

NASA Technical Reports Server (NTRS)

Kourtides, D. A. (Editor)

1978-01-01

The proceedings of the NASA Fire Resistant Materials Engineering (FIREMEN) Program held at Ames Research Center on April, 13, 14, 1978 are reported. The purpose of the conference was to discuss the results of NASA in the field of aircraft fire safety and fire resistant materials. The program components include the following: (1) large-scale testing; (2) fire toxicology; (3) polymeric materials; and (4) bibliography related and/or generated from the program.

Redefining the issues: Action and research agendas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cota-Robles, E.

The January conference involved approximately 45 key researchers, practitioners and policymakers who together addressed the critical themes outlined in the commissioned papers presented at the meeting. In addition to the papers presented in this session, others covered the middle years and adolescent years, and the experience of minority math, science and engineering students as they entered graduate school or the workplace. This paper presents the research and policy agendas arising from the conference, and invites comments from the AAAS audience.

2005 9th Annual Army Small Business Conference

DTIC Science & Technology

2005-11-03

field commanders who conduct acquisitions. All the Army’s major commands located in the United States will be represented. The conference...Engineer Squad Vehicle i r i l Mobile Gun System il yst Medical Evacuation Vehicle i l v ti i l Reconnaissance Vehicle iss i l Mortar Carrier rt r rri r...Manned Systems Unmanned Air Vehicles Class I ARV-A (L) Small (Manpackable) UGV Non-Line of Sight Cannon Non-Line of Sight Mortar Medical Treatment and

Bangalore India Bio 2010.

PubMed

Thammanabhatla, Pratibha; Pailla, Mamatha

2010-08-01

The Bangalore India Bio 2010 conference, held in Bangalore, India, included topics covering new developments in the biopharma industry. This conference report highlights selected presentations on novel therapeutics for the treatment of cancer, including identification of novel benzimidazole, N-subsituted isatin and azetidine derivatives, and an Wnt antagonist. In addition, presentations from several biopharma companies and universities are highlighted, including Proteomics International Pty Ltd, Oxford BioMedica plc, AnaptysBio Inc, SIOGEN Biotech, RV College of Engineering and Indian Institute of Science.

Spacecraft Dynamics as Related to Laboratory Experiments in Space. [conference

NASA Technical Reports Server (NTRS)

Fichtl, G. H. (Editor); Antar, B. N. (Editor); Collins, F. G. (Editor)

1981-01-01

Proceedings are presented of a conference sponsored by the Physics and Chemistry Experiments in Space Working Group to discuss the scientific and engineering aspects involved in the design and performance of reduced to zero gravity experiments affected by spacecraft environments and dynamics. The dynamics of drops, geophysical fluids, and superfluid helium are considered as well as two phase flow, combustion, and heat transfer. Interactions between spacecraft motions and the atmospheric cloud physics laboratory experiments are also examined.

Mechanism of imidazolium ionic liquids toxicity in Saccharomyces cerevisiae and rational engineering of a tolerant, xylose-fermenting strain

DOE PAGES

Dickinson, Quinn; Bottoms, Scott; Hinchman, Li; ...

2016-01-20

In this study, imidazolium ionic liquids (IILs) underpin promising technologies that generate fermentable sugars from lignocellulose for future biorefineries. However, residual IILs are toxic to fermentative microbes such as Saccharomyces cerevisiae, making IIL-tolerance a key property for strain engineering. To enable rational engineering, we used chemical genomic profiling to understand the effects of IILs on S. cerevisiae. As a result, we found that IILs likely target mitochondria as their chemical genomic profiles closely resembled that of the mitochondrial membrane disrupting agent valinomycin. Further, several deletions of genes encoding mitochondrial proteins exhibited increased sensitivity to IIL. High-throughput chemical proteomics confirmed effectsmore » of IILs on mitochondrial protein levels. IILs induced abnormal mitochondrial morphology, as well as altered polarization of mitochondrial membrane potential similar to valinomycin. Deletion of the putative serine/threonine kinase PTK2 thought to activate the plasma-membrane proton efflux pump Pma1p conferred a significant IIL-fitness advantage. Conversely, overexpression of PMA1 conferred sensitivity to IILs, suggesting that hydrogen ion efflux may be coupled to influx of the toxic imidazolium cation. PTK2 deletion conferred resistance to multiple IILs, including [EMIM]Cl, [BMIM]Cl, and [EMIM]Ac. An engineered, xylose-converting ptk2Δ S. cerevisiae (Y133-IIL) strain consumed glucose and xylose faster and produced more ethanol in the presence of 1 % [BMIM]Cl than the wild-type PTK2 strain. We propose a model of IIL toxicity and resistance. In conclusion, this work demonstrates the utility of chemical genomics-guided biodesign for development of superior microbial biocatalysts for the ever-changing landscape of fermentation inhibitors.« less

Perspectives of women of color in science-based education and careers. Summary of the conference on diversity in science

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

Research on inequality or stratification in science and engineering tends to concentrate on black/white or male/female difference; very few studies have discussions of both race and gender. Consequently, very little is known about the exact course that women of color take in science-based education and employment or about the course that steers them out of science-based careers. Questions abound: What are the environmental factors that affect the choices in education and science-based careers of women of color? What has influenced women of color who currently are in science-based careers? Is critical mass important and, if so, what are the keysmore » to increasing it? What recommendations can be made to colleges and universities, faculty members, employers, the federal government, women of color themselves, and to improve the conditions and numbers of women of color in science-based careers? These questions prompted the National Research Council`s Committee on Women in Science and Engineering (CWSE) to convene a conference on Diversity in Science: Perspectives on the Retention of Minority Women in Science, Engineering, and Health-Care Professions, held on October 21--23, 1995. Confronting the problem of the lack of knowledge about the journey of women of color in science-based education and career, the conference offered opportunities for these women to describe the paths that they have taken and to identify strategies for success. Their perspectives ground this report. For purposes of this document, women of color include women in the following racial or ethnic groups: Hispanics, African-Americans, Asian and Pacific Islanders, and American Indians and Alaskan Natives. Science-based careers include those in the physical sciences and mathematics, life sciences, social sciences, and engineering.« less

Integration of Wind Energy Systems into Power Engineering Education Program at UW-Madison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Venkataramanan, Giri; Lesieutre, Bernard; Jahns, Thomas

This project has developed an integrated curriculum focused on the power engineering aspects of wind energy systems that builds upon a well-established graduate educational program at UW- Madison. Five new courses have been developed and delivered to students. Some of the courses have been offered on multiple occasions. The courses include: Control of electric drives for Wind Power applications, Utility Applications of Power Electronics (Wind Power), Practicum in Small Wind Turbines, Utility Integration of Wind Power, and Wind and Weather for Scientists and Engineers. Utility Applications of Power Electronics (Wind Power) has been provided for distance education as well asmore » on-campus education. Several industrial internships for students have been organized. Numerous campus seminars that provide discussion on emerging issues related to wind power development have been delivered in conjunction with other campus events. Annual student conferences have been initiated, that extend beyond wind power to include sustainable energy topics to draw a large group of stakeholders. Energy policy electives for engineering students have been identified for students to participate through a certificate program. Wind turbines build by students have been installed at a UW-Madison facility, as a test-bed. A Master of Engineering program in Sustainable Systems Engineering has been initiated that incorporates specializations that include in wind energy curricula. The project has enabled UW-Madison to establish leadership at graduate level higher education in the field of wind power integration with the electric grid.« less

PREFACE: 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012)

NASA Astrophysics Data System (ADS)

Unal, Halil Ibrahim

2013-02-01

Conference photograph The 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012) was held in Ankara, Turkey at Gazi University in the Architect Kemaleddin historical hall on 2-6 July 2012. The first International Conference on Electrorheological Fluids and Magnetorheological Suspensions took place nearly 25 years ago and this conference continued the same tradition by providing an arena for researchers around the world to present their new research findings in these fields, and gave them the opportunity to learn about the latest research and technology and to renew their acquaintances. The meeting brought together scientists and engineers in multidisciplinary areas such as chemical engineering, mechanical engineering, materials science and engineering, physics, chemistry and polymer science and technology, to explore the state-of-art technology, identify key areas to be focused on and discuss their problems/issues. All oral presentations were held in a single session to enhance the interactions between the scientists and engineers. The ERMR2012 Conference included plenary lectures given by prominent leaders in their respective fields. About 130 participants from more than 50 organizations attended the conference and 15 plenary speeches, 64 oral presentations and 57 poster presentations took place in the following areas: (i) synthesis, characterization and processing of novel ER/MR materials, (ii) dynamics, chain and structure formation of ER/MR materials, (iii) ER/MR elastomers, ferrogels and their characterizations, (iv) rheological techniques and measurements of ER/MR materials, (v) modeling and simulations of ER/MR materials, (vi) device development and control techniques and (vii) applications of ER/MR materials. The ERMR2012 International Conference began with Turkish classical music performed by the musicians of the Ministry of Culture and Tourism. Rector Professor Dr R Ayhan welcomed the participants and the conference chair Professor H I Unal delivered an opening talk before the plenary lectures. Magnetorheological (MR) materials and their applications featured prominently at the ERMR2012 Conference. C A Evrensel from the University of Nevada, USA, opened the first session with a plenary speech on 'Magnetorheological Fluids for Cancer Therapy'. In the field of magnetorheological elastomers (MRE), S Odenbach from TU Dresden, Germany highlighted new developments in data management which enable single particle analysis and statistical analysis of the structures in an MRE in his plenary lecture. Another plenary lecture in the MRE field was given by F Gordaninejad (University of Nevada, USA) on new developments for integrated systems with thick MREs. D Barber (LORD Corporation, USA) gave details of the latest developments of LORD® MR fluids at extremes in his plenary speech. R Hidalgo Alvarez from the University of Granada, Spain, focused on particle shape effects in MR fluids in his plenary talk. D J Klingenberg (University of Wisconsin, USA) illustrated how the increased extent of layer formation increases the yield stress by increasing the stresses transmitted by both the magnetizable and nonmagnetizable spheres in his plenary lecture. S Smoukov from Cambridge University, UK, demonstrated magnetically responsive bi-stable hierarchical materials with novel functionality, which can be effectively used to design sustainable and energy-responsive systems. J de Vicente from the University of Granada, Spain, highlighted true yield stress in magnetorheology with the aid of simulations and experimental techniques for a wide range of MR fluids, inverse ferrofluids and ionic liquids-based MR fluids in his plenary speech. H Böse (Fraunhofer Institute, Germany) gave his plenary speech on magnetorheological torque transmission devices with permanent magnets. W Li (University of Wollongong, Australia), M Nakano (Tohoku University, Japan) and S Xuan (University of Science and Technology of China) gave plenary talks on novel MR shear thickening fluids, MR rubber composites and MR plastomers, respectively. H J Choi (INHA University, Korea), X Zhao (Northwestern Polytechnical University, China) and R Tao (Temple University, USA) delivered plenary lectures on issues relating to the area of electrorheological (ER) fluids. In their talks, Choi and Zhao covered novel ER materials with core-shell structured microspheres and micro/nano hierarchical structured titania particles, respectively, and Tao focused on the reduction of the viscosity of liquid suspensions for energy applications in transporting crude oil via pipelines. Attendance of the presentations was exceptionally high. Poster presentations were divided into two sessions and held in the afternoons after the close of the sessions, which were filled with stimulating discussions. The award for the best student research in the area of electrorheological fluids, sponsored by the Winslow family, was given to Y D Liu of INHA University, Korea on research entitled 'Copolyaniline coated monodisperse polystyrene microparticles and their electrorheological response'. The award for the best student research on magnetorheological suspensions, sponsored by the LORD Corporation, was given to S Kaneko of Keio University, Japan on research entitled 'Effect of a magnetic field on sloshing pressure in a magnetic fluid'. Besides the purely scientific program during the five days, some special events were also organized. A guided tour of the old city and some important landmarks of the capital city of Ankara were organized before the Gala Dinner. Special samples of Turkish classical music and folk dancing were performed by a group from the Republic of Turkey Ministry of Culture and Tourism to exhibit Turkish culture to the delegates at Gala Night, which was truly appreciated. Following the conclusion of this successful meeting, the next conference is expected to be organized at the University of Granada, Spain by Professor F Gonzalez-Caballero in 2014. It is expected that during the next conference, the interaction between polymer chemists synthesizing the new ER/MR materials, experimentalists from the rheological side characterizing their rheological properties, theoretical physicists describing the electric field and magnetic field dependent phenomena in ER/MR fluids rheology, and mechanical engineers conducting vibration damping tests will give rise to a deeper understanding of the ER/MR phenomena and will result in new findings in this field. The conference was sponsored by Gazi University, Anton-Paar GmbH, Kurimoto Ltd., Anamed Analitik Grup, TA Instruments, LORD Corporation, Turkish Powder Metallurgy Association (TTMD), LiKrom Ltd, Atomika Ltd., Turkish Patent Institute (TPI), Berkecan Ltd., Kurukahveci Mehmed Efendi Mahdumlari and Turkish Science-Research Foundation (TUBAV). The organizing committee truly appreciates the support from these organizations. Special appreciation is also due to my students O Erol and H C Gullu. I would also like to thank members of the Local Organizing Committee and International Advisory Board. Guest Editor H Ibrahim Unal Gazi University Science Faculty Chemistry Department 06500 Ankara/Turkey E-mail: hiunal@gazi.edu.tr

Electromagnetic and light scattering by nonspherical particles XVI

NASA Astrophysics Data System (ADS)

Berg, Matthew J.; Eversole, Jay D.; Kolokolova, Ludmilla; Mishchenko, Michael I.; Videen, Gorden

2017-11-01

The 16th Electromagnetic and Light Scattering Conference (ELS-XVI) was held in College Park, MD from 19-25 March 2017 (Fig. 1). This conference built on the success of the previous meetings held in Amsterdam (1995) [1], Helsinki (1997) [2], New York (1998) [3], Vigo (1999), Halifax (2000) [4], Gainesville (2002) [5], Bremen (2003) [6], Salobreña (2005) [7], St. Petersburg (2006) [8], Bodrum (2007) [9], Hatfield (2008) [10], Helsinki (2010) [11], Taormina (2011) [12], Lille (2013) [13], and Leipzig (2015) [14], as well as of three related workshops held in Bremen (1996, 1998) and Moscow (1997). As before, the main objective of this conference was to assemble scientists, engineers, and PhD students researching various aspects of electromagnetic scattering by particles and particle groups and to provide a stimulating atmosphere for in-depth discussions of theory, measurements, and applications. The conference featured 143 presentations by 132 registered participants from 18 countries. The program and the abstracts of conference presentations are available at the official conference web site https://www.giss.nasa.gov/staff/mmishchenko/ELS-XVI.

Nuclear instrumentation and measurement: a review based on the ANIMMA conferences

NASA Astrophysics Data System (ADS)

Giot, Michel; Vermeeren, Ludo; Lyoussi, Abdallah; Reynard-Carette, Christelle; Lhuillier, Christian; Mégret, Patrice; Deconinck, Frank; Gonçalves, Bruno Soares

2017-12-01

The ANIMMA conferences offer a unique opportunity to discover research carried out in all fields of nuclear measurements and instrumentation with applications extending from fundamental physics to fission and fusion reactors, medical imaging, environmental protection and homeland security. After four successful editions of the Conference, it was decided to prepare a review based to a large extent but not exclusively on the papers presented during the first four editions of the conference. This review is organized according to the measurement methodologies: neutronic, photonic, thermal, acoustic and optical measurements, as well as medical imaging and specific challenges linked to data acquisition and electronic hardening. The paper describes the main challenges justifying research in these different areas, and summarizes the recent progress reported. It offers researchers and engineers a way to quickly and efficiently access knowledge in highly specialized areas.