Nuclear reactor control

DOEpatents

Cawley, William E.; Warnick, Robert F.

1982-01-01

1. In a nuclear reactor incorporating a plurality of columns of tubular fuel elements disposed in horizontal tubes in a mass of graphite wherein water flows through the tubes to cool the fuel elements, the improvement comprising at least one control column disposed in a horizontal tube including fewer fuel elements than in a normal column of fuel elements and tubular control elements disposed at both ends of said control column, and means for varying the horizontal displacement of the control column comprising a winch at the upstream end of the control column and a cable extending through the fuel and control elements and attached to the element at the downstream end of the column.

Guided earth boring tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mc Donald, W.J.; Pittard, G.T.; Maurer, W.C.

A controllable tool for drilling holes in the earth is described comprising a hollow elongated rigid supporting drill pipe having a forward end for entering the earth, means supporting the drill pipe for earth boring or piercing movement, including means for moving the drill pipe longitudinally for penetrating the earth, the drill pipe moving means being constructed to permit addition and removal of supporting drill pipe during earth penetrating operation, a boring mole supported on the forward end of the hollow low drill pipe comprising a cylindrical housing supported on and open to the forward end of the drill pipe,more » a first means on the front end for applying a boring force to the soil comprising an anvil having a striking surface inside the housing and a boring surface outside the housing, a second means comprising a reciprocally movable hammer positioned in the housing to apply a percussive force to the anvil striking surface for transmitting a percussive force to the boring force applying means, and means permitting introduction of air pressure supplied through the hollow pipe into the housing for operating the hammer and for discharging spent air from the housing to the hole being bored, and the tool being operable to penetrate the earth upon longitudinal movement of the drill rod by the longitudinal rod moving means and operation of the mole by reciprocal movement of the hammer.« less

Smart tunnel: Docking mechanism

NASA Technical Reports Server (NTRS)

Schliesing, John A. (Inventor); Edenborough, Kevin L. (Inventor)

1989-01-01

A docking mechanism is presented for the docking of a space vehicle to a space station comprising a flexible tunnel frame structure which is deployable from the space station. The tunnel structure comprises a plurality of series connected frame sections, one end section of which is attached to the space station and the other end attached to a docking module of a configuration adapted for docking in the payload bay of the space vehicle. The docking module is provided with trunnions, adapted for latching engagement with latches installed in the vehicle payload bay and with hatch means connectable to a hatch of the crew cabin of the space vehicle. Each frame section comprises a pair of spaced ring members, interconnected by actuator-attenuator devices which are individually controllable by an automatic control means to impart relative movement of one ring member to the other in six degrees of freedom of motion. The control means includes computer logic responsive to sensor signals of range and attitude information, capture latch condition, structural loads, and actuator stroke for generating commands to the onboard flight control system and the individual actuator-attenuators to deploy the tunnel to effect a coupling with the space vehicle and space station after coupling. A tubular fluid-impervious liner, preferably fabric, is disposed through the frame sections of a size sufficient to accommodate the passage of personnel and cargo.

Automatic coolant flow control device for a nuclear reactor assembly

DOEpatents

Hutter, E.

1984-01-27

A device which controls coolant flow through a nuclear reactor assembly comprises a baffle means at the exit end of said assembly having a plurality of orifices, and a bimetallic member in operative relation to the baffle means such that at increased temperatures said bimetallic member deforms to unblock some of said orifices and allow increased coolant flow therethrough.

Automatic coolant flow control device for a nuclear reactor assembly

DOEpatents

Hutter, Ernest

1986-01-01

A device which controls coolant flow through a nuclear reactor assembly comprises a baffle means at the exit end of said assembly having a plurality of orifices, and a bimetallic member in operative relation to the baffle means such that at increased temperatures said bimetallic member deforms to unblock some of said orifices and allow increased coolant flow therethrough.

Apparatus for automated testing of biological specimens

DOEpatents

Layne, Scott P.; Beugelsdijk, Tony J.

1999-01-01

An apparatus for performing automated testing of infections biological specimens is disclosed. The apparatus comprise a process controller for translating user commands into test instrument suite commands, and a test instrument suite comprising a means to treat the specimen to manifest an observable result, and a detector for measuring the observable result to generate specimen test results.

42 CFR 421.404 - Assignment of providers and suppliers to MACs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... section— Chain provider means a group of two or more providers under common ownership or control. Common..., prosthetics, orthotics, and supplies (DMEPOS) means the types of services specified in § 421.210(b). Eligible....202 of this chapter. Qualified chain provider means a chain provider comprised of— (1) 10 or more...

42 CFR 421.404 - Assignment of providers and suppliers to MACs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... section— Chain provider means a group of two or more providers under common ownership or control. Common..., prosthetics, orthotics, and supplies (DMEPOS) means the types of services specified in § 421.210(b). Eligible....202 of this chapter. Qualified chain provider means a chain provider comprised of— (1) 10 or more...

42 CFR 421.404 - Assignment of providers and suppliers to MACs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... section— Chain provider means a group of two or more providers under common ownership or control. Common..., prosthetics, orthotics, and supplies (DMEPOS) means the types of services specified in § 421.210(b). Eligible....202 of this chapter. Qualified chain provider means a chain provider comprised of— (1) 10 or more...

Vct system having closed loop control employing spool valve actuated by a stepper motor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quin, S.B. Jr.; Siemon, E.C.

1993-06-15

An internal combustion engine is described comprising: a crankshaft, the crankshaft being rotable about an axis; a cam shaft, the cam shaft being rotatable about a second axis, the second axis being parallel to the axis, the cam shaft being subject to torque reversals during the rotation thereof; a vane, the vane having at least one lobe, the vane being attached to the cam shaft, being rotatable with the cam shaft and being non-oscillatable with respect to the cam shaft; a housing, the housing being rotatable with the cam shaft and being oscillatable with respect to the cam shaft, themore » housing having at least one recess, the recess receiving the lobe, the lobe being oscillatable within the recess; rotary movement transmitting means for transmitting rotary movement from the crankshaft to the housing; actuating means for varying the position of the housing relative to the cam shaft in reaction to torque reversals in the cam shaft, the actuating means comprising a stepper motor, a lead screw and a proportional spool valve, the position of the spool valve being controlled by the position of the lead screw driven by the stepper motor, the actuating means also delivering hydraulic fluid to the vane; and processing means for controlling the position of the actuating means.« less

Idling speed control system of an internal combustion engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyazaki, M.; Ishii, M.; Kako, H.

1986-09-16

This patent describes an idling speed control system of an internal combustion engine comprising: a valve device which controls the amount of intake air for the engine; an actuator which includes an electric motor for variably controlling the opening of the value device; rotation speed detector means for detecting the rotation speed of the engine; idling condition detector means for detecting the idling condition of the engine; feedback control means responsive to the detected output of the idling condition detector means for generating feedback control pulses to intermittently drive the electric motor so that the detected rotation speed of themore » engine under the idling condition may converge into a target idling rotation speed; and control means responsive to the output of detector means that detects an abnormally low rotation speed of the engine detected by the rotation speed detector means for generating control pulses that do not overlap the feedback control pulses to drive the electric motor in a predetermined direction.« less

Unity power factor switching regulator

NASA Technical Reports Server (NTRS)

Rippel, Wally E. (Inventor)

1983-01-01

A single or multiphase boost chopper regulator operating with unity power factor, for use such as to charge a battery is comprised of a power section for converting single or multiphase line energy into recharge energy including a rectifier (10), one inductor (L.sub.1) and one chopper (Q.sub.1) for each chopper phase for presenting a load (battery) with a current output, and duty cycle control means (16) for each chopper to control the average inductor current over each period of the chopper, and a sensing and control section including means (20) for sensing at least one load parameter, means (22) for producing a current command signal as a function of said parameter, means (26) for producing a feedback signal as a function of said current command signal and the average rectifier voltage output over each period of the chopper, means (28) for sensing current through said inductor, means (18) for comparing said feedback signal with said sensed current to produce, in response to a difference, a control signal applied to the duty cycle control means, whereby the average inductor current is proportionate to the average rectifier voltage output over each period of the chopper, and instantaneous line current is thereby maintained proportionate to the instantaneous line voltage, thus achieving a unity power factor. The boost chopper is comprised of a plurality of converters connected in parallel and operated in staggered phase. For optimal harmonic suppression, the duty cycles of the switching converters are evenly spaced, and by negative coupling between pairs 180.degree. out-of-phase, peak currents through the switches can be reduced while reducing the inductor size and mass.

CONTROL FOR NEUTRONIC REACTOR

DOEpatents

Lichtenberger, H.V.; Cameron, R.A.

1959-03-31

S>A control rod operating device in a nuclear reactor of the type in which the control rod is gradually withdrawn from the reactor to a position desired during stable operation is described. The apparatus is comprised essentially of a stop member movable in the direction of withdrawal of the control rod, a follower on the control rod engageable with the stop and means urging the follower against the stop in the direction of withdrawal. A means responsive to disengagement of the follower from the stop is provided for actuating the control rod to return to the reactor shut-down position.

Gas-controlled dynamic vacuum insulation with gas gate

DOEpatents

Benson, David K.; Potter, Thomas F.

1994-06-07

Disclosed is a dynamic vacuum insulation comprising sidewalls enclosing an evacuated chamber and gas control means for releasing hydrogen gas into a chamber to increase gas molecule conduction of heat across the chamber and retrieving hydrogen gas from the chamber. The gas control means includes a metal hydride that absorbs and retains hydrogen gas at cooler temperatures and releases hydrogen gas at hotter temperatures; a hydride heating means for selectively heating the metal hydride to temperatures high enough to release hydrogen gas from the metal hydride; and gate means positioned between the metal hydride and the chamber for selectively allowing hydrogen to flow or not to flow between said metal hydride and said chamber.

Gas-controlled dynamic vacuum insulation with gas gate

DOEpatents

Benson, D.K.; Potter, T.F.

1994-06-07

Disclosed is a dynamic vacuum insulation comprising sidewalls enclosing an evacuated chamber and gas control means for releasing hydrogen gas into a chamber to increase gas molecule conduction of heat across the chamber and retrieving hydrogen gas from the chamber. The gas control means includes a metal hydride that absorbs and retains hydrogen gas at cooler temperatures and releases hydrogen gas at hotter temperatures; a hydride heating means for selectively heating the metal hydride to temperatures high enough to release hydrogen gas from the metal hydride; and gate means positioned between the metal hydride and the chamber for selectively allowing hydrogen to flow or not to flow between said metal hydride and said chamber. 25 figs.

Team Electronic Gameplay Combining Different Means of Control

NASA Technical Reports Server (NTRS)

Palsson, Olafur S. (Inventor); Pope, Alan T. (Inventor)

2014-01-01

Disclosed are methods and apparatuses provided for modifying the effect of an operator controlled input device on an interactive device to encourage the self-regulation of at least one physiological activity by a person different than the operator. The interactive device comprises a display area which depicts images and apparatus for receiving at least one input from the operator controlled input device to thus permit the operator to control and interact with at least some of the depicted images. One effect modification comprises measurement of the physiological activity of a person different from the operator, while modifying the ability of the operator to control and interact with at least some of the depicted images by modifying the input from the operator controlled input device in response to changes in the measured physiological signal.

Associations Among Meaning in Life, Body Image, Psychopathology, and Suicide Ideation in Spanish Participants With Eating Disorders.

PubMed

Marco, José H; Cañabate, Montserrat; Pérez, Sandra; Llorca, Ginés

2017-12-01

The aims of this study were to (a) analyze whether participants with eating disorders have lower meaning in life than the nonclinical population; (b) discover whether participants with eating disorders with low meaning in life have more body image disturbances, more psychopathology, and higher suicide ideation than participants with high meaning in life; (c) analyze whether meaning in life is associated with eating disorder psychopathology; and (d) analyze whether meaning in life is able to predict eating disorder psychopathology and suicide ideation, when body image is controlled. The clinical sample comprised 247 Spanish participants diagnosed with eating disorders, and the nonclinical sample comprised Spanish 227 participants. Participants with eating disorders had lower meaning in life than the nonclinical population. Patients with low meaning in life had higher psychopathology and suicide ideation than participants with high meaning in life. Meaning in life was a significant predictor of the eating disorder psychopathology and suicide ideation. Low meaning in life is associated with eating disorder psychopathology in a Spanish sample with eating disorders. © 2017 Wiley Periodicals, Inc.

Low zinc levels may contribute to gynecomastia in puberty.

PubMed

Erkekoglu, Pinar; Durmaz, Erdem; Kızılgün, Murat; Özmert, Elif N; Derman, Orhan; Yurdakök, Kadriye; Kocer-Gumusel, Belma

2017-12-01

This study aimed to determine whether there were any differences in trace element levels between adolescent boys with gynecomastia and control boys and to determine the correlations between the levels of trace elements and body mass index (BMI) and sex hormones. The pubertal gynecomastia group comprised of 41 patients (mean age=13.2 ±0.9 years), who were admitted to Hacettepe University İhsan Doğramacı Children's Hospital in Ankara. Control group comprised of 21 healthy male children. Analyses of trace element levels were performed atomic absorption spectrometry. The mean zinc level of control group was 101.33±16.87μg/dL and the mean zinc level of gynecomastia group was 81.36±17,43μg/dL (20% lower in gynecomastia patients, p=0.0001). However, the mean copper and manganese levels of gynecomastia patients were not statistically different than the control group. There were significant positive correlations between plasma zinc and total testosterone levels in gynecomastia group (r=0.592; p<0.05). There was a significant negative correlation between plasma zinc levels and BMI (r=-0.311; p<0.05). These results indicate that zinc deficiency might be one of the underlying factors of gynecomastia, the importance of which needs to be further elucidated. Copyright © 2017 Elsevier GmbH. All rights reserved.

Method and apparatus for controlling the solenoid current of a solenoid valve which controls the amount of suction of air in an internal combustion engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiuchi, T.; Yasuoka, A.

1988-09-13

This patent describes apparatus for controlling the solenoid current of a selenoid valve which controls the amount of suction air in an internal combustion engine, the apparatus comprising: (a) engine rotational speed detector means for detecting engine rotational speed; (b) aimed idle speed setting means for generating a signal corresponding to a predetermined idling speed; (c) first calculating means coupled to the engine rotational speed detector means and the aimed idle speed setting means for calculating a feedback control term Ifb(n) as a function of an integration term (Iai), a proportion term (Ip), and a differentiation term (Id); (d) firstmore » determining and storing means coupled to the first calculating means, for determining an integration term (Iai(n)) of the feedback control term (Ifb(n)) and for determining a determined value (Ixref) in accordance therewith; (e) changeover means coupled to the first calculating means and the first determining and storing means for selecting the output of one of the first calculating means or the first determining and storing means; (f) first signal generating means coupled to the changeover means for generating a solenoid current control value (Icmd) as a function of the output of the changeover.« less

No Evidence of Reaction Time Slowing in Autism Spectrum Disorder

ERIC Educational Resources Information Center

Ferraro, F. Richard

2016-01-01

A total of 32 studies comprising 238 simple reaction time and choice reaction time conditions were examined in individuals with autism spectrum disorder (n?=?964) and controls (n?=?1032). A Brinley plot/multiple regression analysis was performed on mean reaction times, regressing autism spectrum disorder performance onto the control performance as…

Consanguineous Marriage as a Risk Factor for Developing Keratoconus

PubMed Central

JAMALI, Hossein; BEIGI, Vahid; SADEGHI-SARVESTANI, Ali

2018-01-01

Heredity plays an important role in keratoconus (KC). Consanguineous marriage (CM) can affect the transmission of recessively inherited conditions. We aimed to investigate the role of consanguineous marriage in the development of KC. This study included two groups: the first group comprised 415 patients who underwent surgery for KC for the first time at Khalili University Hospital (Shiraz, Iran), between 2010 and 2014; the second group comprised 415 healthy individuals who served as age- and sex-matched controls for the patient group. All study subjects were from the Fars province in Iran. CM type was evaluated by a standard checklist in both groups. The mean inbreeding coefficient (α) was evaluated and compared between the two groups. The percentage of parental first-cousin marriages was 35.4% in the patient group and 18.3% in the control group. The mean inbreeding coefficient (α) was 0.0291 in the patient group and 0.0135 in the control group. Patients with KC had a significantly higher mean inbreeding coefficient (α) than controls (T = 8, df = 828, P < 0.001). Our study suggests that CM can play a role in the pathogenesis of KC. As this disease is among the most frequent ocular disorders in our country, CM should be considered by health care systems within their screening programs. PMID:29644240

Therapy radiation apparatus for veterinary medicine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parris, D.M.

1987-03-03

A radiation device is described for use in veterinary medicine, for treating exterior and interior portions of animal bodies, comprising: (a) power supply means providing selected voltages; (b) high frequency oscillator means; (c) frequency divider means responsive to the oscillator means, and adapted to control switch means for modulating a voltage supply for at least one non-laser broad band infrared radiation diode providing an expanding beam of radiation; and (d) means for applying at least one one-laser broad band infrared radiation diode to a dermal surface of an animal.

Laser based analysis using a passively Q-switched laser employing analysis electronics and a means for detecting atomic optical emission of the laser media

DOEpatents

Woodruff, Steven D.; Mcintyre, Dustin L.

2016-03-29

A device for Laser based Analysis using a Passively Q-Switched Laser comprising an optical pumping source optically connected to a laser media. The laser media and a Q-switch are positioned between and optically connected to a high reflectivity mirror (HR) and an output coupler (OC) along an optical axis. The output coupler (OC) is optically connected to the output lens along the optical axis. A means for detecting atomic optical emission comprises a filter and a light detector. The optical filter is optically connected to the laser media and the optical detector. A control system is connected to the optical detector and the analysis electronics. The analysis electronics are optically connected to the output lens. The detection of the large scale laser output production triggers the control system to initiate the precise timing and data collection from the detector and analysis.

Air conditioning system and component therefore distributing air flow from opposite directions

NASA Technical Reports Server (NTRS)

Obler, H. D.; Bauer, H. B. (Inventor)

1974-01-01

The air conditioning system comprises a plurality of separate air conditioning units coupled to a common supply duct such that air may be introduced into the supply duct in two opposite flow directions. A plurality of outlets such as registers or auxiliary or branch ducts communicate with the supply duct and valve means are disposed in the supply duct at at least some of the outlets for automatically channelling a controllable amount of air from the supply duct to the associated outlet regardless of the direction of air flow within the supply duct. The valve means comprises an automatic air volume control apparatus for distribution within the air supply duct into which air may be introduced from two opposite directions. The apparatus incorporates a freely swinging movable vane in the supply duct to automatically channel into the associated outlet only the deflected air flow which has the higher relative pressure.

Method and apparatus for injecting a substance into the bloodstream of a subject

DOEpatents

Lambrecht, Richard M.; Bennett, Gerald W.; Duncan, Charles C.; Ducote, Louis W.

1983-10-18

An apparatus and method for injecting a substance, such as a radiopharmaceutical, into the bloodstream of a subject. The apparatus comprises an injection means, such as a servo controlled syringe, a means for measuring the concentration of that substance in the subject's bloodstream, and means for controlling the injection in response to the measurement so that the concentration of the substance follows a predetermined function of time. The apparatus of the subject invention functions to inject a substance into a subject's bloodstream at a rate controlled by an error signal proportional to the difference between the concentration of the substance in the subject's bloodstream and the predetermined function.

Method and apparatus for injecting a substance into the bloodstream of a subject

DOEpatents

Lambrecht, R.M.; Bennett, G.W.; Duncan, C.C.; Ducote, L.W.

1983-10-18

An apparatus and method is disclosed for injecting a substance, such as a radiopharmaceutical, into the bloodstream of a subject. The apparatus comprises an injection means, such as a servo controlled syringe, a means for measuring the concentration of that substance in the subject's bloodstream, and means for controlling the injection in response to the measurement so that the concentration of the substance follows a predetermined function of time. The apparatus of the subject invention functions to inject a substance into a subject's bloodstream at a rate controlled by an error signal proportional to the difference between the concentration of the substance in the subject's bloodstream and the predetermined function. 2 figs.

Global meaning in people with stroke: Content and changes

PubMed Central

Littooij, Elsbeth; Dekker, Joost; Vloothuis, Judith; Leget, Carlo JW; Widdershoven, Guy AM

2016-01-01

After a traumatic event like a stroke, people need to find meaning and control again. This study enhances knowledge on one of the driving principles behind meaning-making processes: global meaning. Global meaning refers to individuals’ general orienting systems, comprising fundamental beliefs and life goals. Little is known about global meaning in people with stroke and whether global meaning changes after stroke. In this qualitative study, five aspects of global meaning were found: core values, relationships, worldview, identity and inner posture. Continuity in all aspects was reported, but worldview, identity and inner posture were also subjected to change. PMID:28815054

Global meaning in people with stroke: Content and changes.

PubMed

Littooij, Elsbeth; Dekker, Joost; Vloothuis, Judith; Leget, Carlo Jw; Widdershoven, Guy Am

2016-07-01

After a traumatic event like a stroke, people need to find meaning and control again. This study enhances knowledge on one of the driving principles behind meaning-making processes: global meaning. Global meaning refers to individuals' general orienting systems, comprising fundamental beliefs and life goals. Little is known about global meaning in people with stroke and whether global meaning changes after stroke. In this qualitative study, five aspects of global meaning were found: core values, relationships, worldview, identity and inner posture. Continuity in all aspects was reported, but worldview, identity and inner posture were also subjected to change.

Low heat transfer, high strength window materials

DOEpatents

Berlad, Abraham L.; Salzano, Francis J.; Batey, John E.

1978-01-01

A multi-pane window with improved insulating qualities; comprising a plurality of transparent or translucent panes held in an essentially parallel, spaced-apart relationship by a frame. Between at least one pair of panes is a convection defeating means comprising an array of parallel slats or cells so designed as to prevent convection currents from developing in the space between the two panes. The convection defeating structures may have reflective surfaces so as to improve the collection and transmittance of the incident radiant energy. These same means may be used to control (increase or decrease) the transmittance of solar energy as well as to decouple the radiative transfer between the interior surfaces of the transparent panes.

NEUTRONIC REACTOR

DOEpatents

Wade, E.J.

1958-09-16

This patent relates to a reflector means for a neutronic reactor. A reflector comprised of a plurality of vertically movable beryllium control members is provided surrounding the sides of the reactor core. An absorber of fast neutrons comprised of natural uramum surrounds the reflector. An absorber of slow neutrons surrounds the absorber of fast neutrons and is formed of a plurality of beryllium blocks having natural uranium members distributcd therethrough. in addition, a movable body is positioned directly below the core and is comprised of a beryllium reflector and an absorbing member attached to the botiom thereof, the absorbing member containing a substance selected from the goup consisting of natural urantum and Th/sup 232/.

Heat recovery system employing a temperature controlled variable speed fan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, W.T.

1986-05-20

A heat recovery system is described for use in recovering heat from an industrial process producing a heated fluid comprising: a source of inlet air; a housing coupled to the source and including a heat exchanger; means for passing the heated fluid through the heat exchanger; the housing including means for moving a variable volume of air adjustable over a continuous range from the source through the heat exchanger; air discharge means communicating with the housing for discharging air which has passed through the heat exchanger; a control system including first temperature sensing means for sensing the discharge temperature ofmore » the discharge air moving through the discharge means and a control circuit coupled to the first temperature sensing means and to the moving means for varying the volume of air moved in response to the sensed discharge temperature to control the temperature of discharge air passing through the discharge means at a first predetermined value; and the control system including second temperature sensing means for sensing the temperature of the source of inlet air and valve means coupled to and controlled by the control circuit to cause liquid to bypass the heat exchanger when the inlet air temperature rises above a second predetermined value.« less

Diesel engine exhaust oxidizer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kammel, R.A.

1992-06-16

This patent describes a diesel engine exhaust oxidizing device. It comprises: an enclosure having an inlet for receiving diesel engine exhaust, a main flow path through the enclosure to an outlet of the enclosure, a by-ass through the enclosure, and a microprocessor control means.

Travel guidance system for vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takanabe, K.; Yamamoto, M.; Ito, K.

1987-02-24

A travel guidance system is described for vehicles including: a heading sensor for detecting a direction of movement of a vehicle; a distance sensor for detecting a distance traveled by the vehicle; a map data storage medium preliminarily storing map data; a control unit for receiving a heading signal from the heading sensor and a distance signal from the distance sensor to successively compute a present position of the vehicle and for generating video signals corresponding to display data including map data from the map data storage medium and data of the present position; and a display having first andmore » second display portions and responsive to the video signals from the control unit to display on the first display portion a map and a present portion mark, in which: the map data storage medium comprises means for preliminarily storing administrative division name data and landmark data; and the control unit comprises: landmark display means for: (1) determining a landmark closest to the present position, (2) causing a position of the landmark to be displayed on the map and (3) retrieving a landmark massage concerning the landmark from the storage medium to cause the display to display the landmark message on the second display portion; division name display means for retrieving the name of an administrative division to which the present position belongs from the storage medium and causing the display to display a division name message on the second display portion; and selection means for selectively actuating at least one of the landmark display means and the division name display means.« less

Illumination control apparatus for compensating solar light

NASA Technical Reports Server (NTRS)

Owens, L. J. (Inventor)

1978-01-01

An illumination control apparatus is presented for supplementing light from solar radiation with light from an artificial light source to compensate for periods of insufficient levels of solar light. The apparatus maintains a desired illumination level within an interior space comprising an artificial light source connected to an electrical power source with a switch means for selectively energizing said light source. An actuator means for controlling the on-off operation of the switch means is connected to a light sensor which responses to the illumination level of the interior space. A limit switch carried adjacent to the actuator limits the movement of the actuator within a predetermined range so as to prevent further movement thereof during detection of erroneous illumination conditions.

Development of a Space Station Operations Management System

NASA Technical Reports Server (NTRS)

Brandli, A. E.; Mccandless, W. T.

1988-01-01

To enhance the productivity of operations aboard the Space Station, a means must be provided to augment, and frequently to supplant, human effort in support of mission operations and management, both on the ground and onboard. The Operations Management System (OMS), under development at the Johnson Space Center, is one such means. OMS comprises the tools and procedures to facilitate automation of station monitoring, control, and mission planning tasks. OMS mechanizes, and hence rationalizes, execution of tasks traditionally performed by mission planners, the mission control center team, onboard System Management software, and the flight crew.

Development of a Space Station Operations Management System

NASA Astrophysics Data System (ADS)

Brandli, A. E.; McCandless, W. T.

To enhance the productivity of operations aboard the Space Station, a means must be provided to augment, and frequently to supplant, human effort in support of mission operations and management, both on the ground and onboard. The Operations Management System (OMS), under development at the Johnson Space Center, is one such means. OMS comprises the tools and procedures to facilitate automation of station monitoring, control, and mission planning tasks. OMS mechanizes, and hence rationalizes, execution of tasks traditionally performed by mission planners, the mission control center team, onboard System Management software, and the flight crew.

CONTROL LIMITER DEVICE

DOEpatents

DeShong, J.A.

1960-03-01

A control-limiting device for monltoring a control system is described. The system comprises a conditionsensing device, a condition-varying device exerting a control over the condition, and a control means to actuate the condition-varying device. A control-limiting device integrates the total movement or other change of the condition-varying device over any interval of time during a continuum of overlapping periods of time, and if the tothl movement or change of the condition-varying device exceeds a preset value, the control- limiting device will switch the control of the operated apparatus from automatic to manual control.

Continuous magnetic separator and process

DOEpatents

Oder, Robin R.; Jamison, Russell E.

2008-04-22

A continuous magnetic separator and process for separating a slurry comprising magnetic particles into a clarified stream and a thickened stream. The separator has a container with a slurry inlet, an overflow outlet for the discharge of the clarified slurry stream, and an underflow outlet for the discharge of a thickened slurry stream. Magnetic particles in the slurry are attracted to, and slide down, magnetic rods within the container. The slurry is thus separated into magnetic concentrate and clarified slurry. Flow control means can be used to control the ratio of the rate of magnetic concentrate to the rate of clarified slurry. Feed control means can be used to control the rate of slurry feed to the slurry inlet.

Femtosecond Chirp-Free Transient Absorption Method And Apparatus

DOEpatents

McBranch, Duncan W.; Klimov, Victor I.

2001-02-20

A method and apparatus for femtosecond transient absorption comprising phase-sensitive detection, spectral scanning and simultaneous controlling of a translation stage to obtain TA spectra information having at least a sensitivity two orders of magnitude higher than that for single-shot methods, with direct, simultaneous compensation for chirp as the data is acquired. The present invention includes a amplified delay translation stage which generates a splittable frequency-doubled laser signal at a predetermined frequency f, a controllable means for synchronously modulating one of the laser signals at a repetition rate of f/2, applying the laser signals to a material to be sample, and acquiring data from the excited sample while simultaneously controlling the controllable means for synchronously modulating.

Fuel supply device for supplying fuel to an engine combustor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindsay, M.H.; Kerr, W.B.

1990-05-29

This patent describes a variable flow rate fuel supply device for supplying fuel to an engine combustor. It comprises: fuel metering means having a fuel valve means for controlling the flow rate of fuel to the combustor; piston means for dividing a first cooling fluid chamber from a second cooling fluid chamber; coupling means for coupling the piston means to the fuel valve means; and cooling fluid supply means in communication with the first and second cooling fluid chamber for producing a first pressure differential across the piston means for actuating the fuel valve means in a first direction, andmore » for producing a second pressure differential across the piston means for actuating the valve means in a second direction opposite the first direction, to control the flow rate of the fuel through the fuel metering means and into the engine combustor; and means for positioning the fuel metering means within the second cooling air chamber enabling the cooling air supply means to both cool the fuel metering means and control the fuel supply rate of fuel supplied by the fuel metering means to the combustor.« less

Engine restart aid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fedewa, Andrew

A system is disclosed comprising an engine having coolant passages defined therethrough, a first coolant pump, and a first radiator. The system additionally comprises a second coolant pump, a second radiator, and a liquid-to-air heat exchanger configured to condition the temperature of intake air to the engine. The system further includes a coolant valve means. For a first configuration of the coolant valve means the first coolant pump is configured to urge coolant through the coolant passages in the engine and through the first radiator, and the second coolant pump is configured to urge coolant through the liquid-to-air heat exchangermore » and through the second radiator. For a second configuration of the coolant valve means the second coolant pump is configured to urge coolant through the coolant passages in the engine and through the liquid-to-air heat exchanger. A method for controlling the system is also disclosed.« less

Dermatoglyphics: a genetic marker of early childhood caries.

PubMed

Anitha, C; Konde, Sapna; Raj, N Sunil; Kumar, N C; Peethamber, Preetha

2014-01-01

It is an accepted fact that genetics plays an important role in determination of palmar dermatoglyphic patterns. Since caries is a multifactorial disease with the influence of genetic pattern, this study was undertaken to explore the possibility of dermatoglyphics as a noninvasive and early predictor of dental caries in children, so as to initiate preventive oral health measures at an early age. The study group comprised of 200 children aged between 4 and 5 years. The dmfs score was evaluated. The experimental group (Group 1), comprised of 100 children with early childhood caries (ECC) with dmfs >5. The control group (Group 2) comprised of 100 children with dmfs score of 0. An increased frequency of ulnar loops in caries-free children and whorls in children with ECC was observed. Low mean atd angle and low mean. Total ridge count was observed in the ECC group. There is definite variation in dermatoglyphics between the ECC and caries-free group, indicating that dermatoglyphic patterns can be used as a predictive tool for children with ECC.

Position feedback control system

DOEpatents

Bieg, Lothar F.; Jokiel, Jr., Bernhard; Ensz, Mark T.; Watson, Robert D.

2003-01-01

Disclosed is a system and method for independently evaluating the spatial positional performance of a machine having a movable member, comprising an articulated coordinate measuring machine comprising: a first revolute joint; a probe arm, having a proximal end rigidly attached to the first joint, and having a distal end with a probe tip attached thereto, wherein the probe tip is pivotally mounted to the movable machine member; a second revolute joint; a first support arm serially connecting the first joint to the second joint; and coordinate processing means, operatively connected to the first and second revolute joints, for calculating the spatial coordinates of the probe tip; means for kinematically constraining the articulated coordinate measuring machine to a working surface; and comparator means, in operative association with the coordinate processing means and with the movable machine, for comparing the true position of the movable machine member, as measured by the true position of the probe tip, with the desired position of the movable machine member.

Correlation of Salivary pH, Incidence of Dental Caries and Periodontal Status in Diabetes Mellitus Patients: A Cross-sectional Study.

PubMed

Seethalakshmi, C; Reddy, R C Jagat; Asifa, Nisha; Prabhu, S

2016-03-01

Diabetes mellitus is a chronic disease affecting many parts of the body. A number of oral diseases have been associated with diabetes mellitus with an increased risk of dental caries and periodontal disease. The aim of the study was to evaluate the salivary pH and incidence of dental caries and periodontal status in diabetes mellitus compared to that of the normal subjects. The study population consisted of 40 patients divided into 2 groups with group I comprising of 20 known diabetes mellitus patients and group II comprising of 20 non diabetic subjects as control group. The pH of the saliva was determined using a digital pH meter. Dental caries and periodontal status were assessed by DMFT and PDI indices respectively. There was a decrease in the mean salivary pH of 6.51 in the study group, compared to the normal mean salivary pH of 7.88 in the control group. The mean DMFT index was higher in the study group (8.10) when compared to that of control group (1.15). The mean PDI score was also higher in the study group (4.0) as compared to that of the control group (0.45). The results of the present study concluded that there was a significant relationship between the diabetes mellitus and increased incidence of dental caries and periodontitis and there was also a significant reduction in the salivary pH in diabetes mellitus patients, compared to that of non diabetic subjects.

Correlation of Salivary pH, Incidence of Dental Caries and Periodontal Status in Diabetes Mellitus Patients: A Cross-sectional Study

PubMed Central

Reddy, R.C. Jagat; Asifa, Nisha; Prabhu, S.

2016-01-01

Introduction Diabetes mellitus is a chronic disease affecting many parts of the body. A number of oral diseases have been associated with diabetes mellitus with an increased risk of dental caries and periodontal disease. Aim The aim of the study was to evaluate the salivary pH and incidence of dental caries and periodontal status in diabetes mellitus compared to that of the normal subjects. Materials and Methods The study population consisted of 40 patients divided into 2 groups with group I comprising of 20 known diabetes mellitus patients and group II comprising of 20 non diabetic subjects as control group. The pH of the saliva was determined using a digital pH meter. Dental caries and periodontal status were assessed by DMFT and PDI indices respectively. Results There was a decrease in the mean salivary pH of 6.51 in the study group, compared to the normal mean salivary pH of 7.88 in the control group. The mean DMFT index was higher in the study group (8.10) when compared to that of control group (1.15). The mean PDI score was also higher in the study group (4.0) as compared to that of the control group (0.45). Conclusion The results of the present study concluded that there was a significant relationship between the diabetes mellitus and increased incidence of dental caries and periodontitis and there was also a significant reduction in the salivary pH in diabetes mellitus patients, compared to that of non diabetic subjects. PMID:27134992

An Exploration of the Relationship between Perception of Control, Physical Disability, Optimism, Self-Efficacy and Hopelessness in Multiple Sclerosis

ERIC Educational Resources Information Center

Sinnakaruppan, Indrani; Macdonald, Kirsty; McCafferty, Aileen; Mattison, Paul

2010-01-01

The objective of this study was to explore the relationship between the Perception of Control Scale (PCS) and other measures that incorporate physical disability, optimism, self-efficacy and hopelessness components in a Multiple Sclerosis (MS) sample. One hundred and fifteen participants comprising 44 males and 71 females with a mean age of 45.65…

High-field double-pancake superconducting coils and a method of winding

DOEpatents

Materna, P.A.

1984-01-31

A double-pancake coil having first and second pancakes may comprise a plurality of conductor means, each conductor means having a different grade and having one or more conductors, wherein each pancake of said double-pancake coil is comprised of inner and outer turns; wherein said inner turns are comprised of at least one of said conductor means wound about an axis and nested within one another; wherein said outer turns are comprised of said inner conductor means and at least one other conductor means co-wound about said inner turns and nested within one another; wherein each of said conductor means is wound along said axis from said first pancake to said second pancake at a different turn.

High-field double-pancake superconducting coils and a method of winding

DOEpatents

Materna, Peter A.

1985-01-01

A double-pancake coil having first and second pancakes may comprise a plurality of conductor means, each conductor means having a different grade and having one or more conductors, wherein each pancake of said double-pancake coil is comprised of inner and outer turns; wherein said inner turns are comprised of at least one of said conductor means wound about an axis and nested within one another; wherein said outer turns are comprised of said inner conductor means and at least one other conductor means co-wound about said inner turns and nested within one another; wherein each of said conductor means is wound along said axis from said first pancake to said second pancake at a different turn.

Lock-up control system for an automatic transmission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Higashi, H.; Yashiki, S.; Waki, K.

A lock-up control system is described for an automatic transmission including a torque converter coupled with the output portion on an engine, and a power transmitting gear arrangement coupled with the output portion of the torque converter and controlled to vary the transmitting gear ratio therein by gear ratio control means in accordance with a shifting up or down command supplied to the latter. A lock-up clutch is provided for locking up the output portion of the torque converter to the output portion of the engine. The lock-up control system comprises: lock-up operation control means for controlling the lock-up clutchmore » to be in its operative state and in its inoperative state selectively, and for causing the lock-up clutch to be in the inoperative state thereof when the gear ratio control means performs the control with the shifting up or down command, and lock-up command means for preventing the lock-up operation control means from causing the lock-up clutch to be in the inoperative state thereof until a predetermined reductive variation in the speed of the output portion of the torque converter arises after the shifting up command is supplied to the gear ratio control means under the condition in which the lock-up clutch is in operation to hold a lock-up state.« less

Spark ignition timing control system for internal combustion engine with feature of suppression of jerking during engine acceleration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomisawa, N.

1989-07-04

This patent describes a spark ignition timing control system for an internal combustion engine, it comprises: sensor means monitoring preselected parameters for producing a sensor signal; first means for deriving a spark ignition timing on the basis of data contained in the sensor signal; second means for detecting an engine acceleration demand for producing an accelerating condition indicative signal; and third means, responsive to the accelerating condition indicative signal, for modifying the spark ignition timing derived by the first means after expiration of a first predetermined period of time of occurence of the accelerating condition indicative signal, in such amore » manner that the spark ignition timing is advanced and retarded for suppressing cycle-to-cycle fluctuation of engine speed and for smoothly increasing engine speed.« less

Control of bed height in a fluidized bed gasification system

DOEpatents

Mehta, Gautam I.; Rogers, Lynn M.

1983-12-20

In a fluidized bed apparatus a method for controlling the height of the fdized bed, taking into account variations in the density of the bed. The method comprises taking simultaneous differential pressure measurements at different vertical elevations within the vessel, averaging the differential pressures, determining an average fluidized bed density, then periodically calculating a weighting factor. The weighting factor is used in the determination of the actual bed height which is used in controlling the fluidizing means.

Apparatus to position a microelectromechanical platform

DOEpatents

Miller, Samuel Lee; Rodgers, Murray Steven

2003-09-23

The present invention comprises a microelectromechanical positioner to achieve substantially translational positioning of a platform without rotational motion, thereby maintaining a constant angular orientation of the platform during movement. A linkage mechanism of the positioner can comprise parallelogram linkages to constrain the rotational motion of the platform. Such linkages further can comprise flexural hinges or other turning joints at the linkage pivots to eliminate the need for rubbing surfaces. A plurality of the linkage mechanisms can be used to enable translational motion of the platform with two degrees of freedom. A variety of means can be used to actuate the positioner. Independent actuation of the anchor links of the linkage mechanisms with rotary electrostatic actuators can be used to provide controlled translational movement of the platform.

Device for balancing parallel strings

DOEpatents

Mashikian, Matthew S.

1985-01-01

A battery plant is described which features magnetic circuit means in association with each of the battery strings in the battery plant for balancing the electrical current flow through the battery strings by equalizing the voltage across each of the battery strings. Each of the magnetic circuit means generally comprises means for sensing the electrical current flow through one of the battery strings, and a saturable reactor having a main winding connected electrically in series with the battery string, a bias winding connected to a source of alternating current and a control winding connected to a variable source of direct current controlled by the sensing means. Each of the battery strings is formed by a plurality of batteries connected electrically in series, and these battery strings are connected electrically in parallel across common bus conductors.

26 CFR 1.892-2T - Foreign government defined (temporary regulations).

Code of Federal Regulations, 2010 CFR

2010-04-01

... income from its intended use by the exertion of influence or control through means explicitly or... that perform or performed governmental or social services; (ii) The funds that comprise the trust are... or social services. (2) Illustrations. The following examples illustrate the application of paragraph...

26 CFR 1.892-2T - Foreign government defined (temporary regulations).

Code of Federal Regulations, 2011 CFR

2011-04-01

... income from its intended use by the exertion of influence or control through means explicitly or... that perform or performed governmental or social services; (ii) The funds that comprise the trust are... or social services. (2) Illustrations. The following examples illustrate the application of paragraph...

Apparatus for monitoring crystal growth

DOEpatents

Sachs, Emanual M.

1981-01-01

A system and method are disclosed for monitoring the growth of a crystalline body from a liquid meniscus in a furnace. The system provides an improved human/machine interface so as to reduce operator stress, strain and fatigue while improving the conditions for observation and control of the growing process. The system comprises suitable optics for forming an image of the meniscus and body wherein the image is anamorphic so that the entire meniscus can be viewed with good resolution in both the width and height dimensions. The system also comprises a video display for displaying the anamorphic image. The video display includes means for enhancing the contrast between any two contrasting points in the image. The video display also comprises a signal averager for averaging the intensity of at least one preselected portions of the image. The value of the average intensity, can in turn be utilized to control the growth of the body. The system and method are also capable of observing and monitoring multiple processes.

Method of monitoring crystal growth

DOEpatents

Sachs, Emanual M.

1982-01-01

A system and method are disclosed for monitoring the growth of a crystalline body from a liquid meniscus in a furnace. The system provides an improved human/machine interface so as to reduce operator stress, strain and fatigue while improving the conditions for observation and control of the growing process. The system comprises suitable optics for forming an image of the meniscus and body wherein the image is anamorphic so that the entire meniscus can be viewed with good resolution in both the width and height dimensions. The system also comprises a video display for displaying the anamorphic image. The video display includes means for enhancing the contrast between any two contrasting points in the image. The video display also comprises a signal averager for averaging the intensity of at least one preselected portions of the image. The value of the average intensity, can in turn be utilized to control the growth of the body. The system and method are also capable of observing and monitoring multiple processes.

APPARATUS FOR MINIMIZING ENERGY LOSSES FROM MAGNETICALLY CONFINED VOLUMES OF HOT PLASMA

DOEpatents

Post, R.F.

1961-10-01

An apparatus is described for controlling electron temperature in plasma confined in a Pyrotron magnetic containment field. Basically the device comprises means for directing low temperature electrons to the plasma in controlled quantities to maintain a predetermined optimum equilibrium electron temperature whereat minimum losses of plasma ions due to ambipolar effects and energy damping of the ions due to dynamical friction with the electrons occur. (AEC)

Reconfigurable pipelined processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saccardi, R.J.

1989-09-19

This patent describes a reconfigurable pipelined processor for processing data. It comprises: a plurality of memory devices for storing bits of data; a plurality of arithmetic units for performing arithmetic functions with the data; cross bar means for connecting the memory devices with the arithmetic units for transferring data therebetween; at least one counter connected with the cross bar means for providing a source of addresses to the memory devices; at least one variable tick delay device connected with each of the memory devices and arithmetic units; and means for providing control bits to the variable tick delay device formore » variably controlling the input and output operations thereof to selectively delay the memory devices and arithmetic units to align the data for processing in a selected sequence.« less

RANDOM PULSE GENERATOR PRODUCING FIDUCIAL MARKS

DOEpatents

Nielsen, W.F.

1960-02-01

The apparatus for automatically applying a fiducial marking, having a nonrepetitive pattern, to a plurality of simultaneously made records comprises, in series, a bypass filter, a trigger circuit, and a pulse generator, with printing means connected to and controlled by the pulse generator for simultaneously making the visible fiducial marks on a plurality of simultaneously produced records.

A new experimental model of cigarette smoke-induced emphysema in Wistar rats*, **

PubMed Central

Kozma, Rodrigo de las Heras; Alves, Edson Marcelino; Barbosa-de-Oliveira, Valter Abraão; Lopes, Fernanda Degobbi Tenorio Quirino dos Santos; Guardia, Renan Cenize; Buzo, Henrique Vivi; de Faria, Carolina Arruda; Yamashita, Camila; Cavazzana, Manzelio; Frei, Fernando; Ribeiro-Paes, Maria José de Oliveira; Ribeiro-Paes, João Tadeu

2014-01-01

OBJECTIVE: To describe a new murine model of cigarette smoke-induced emphysema. METHODS: Twenty-four male Wistar rats were divided into two groups: the cigarette smoke group, comprising 12 rats exposed to smoke from 12 commercial filter cigarettes three times a day (a total of 36 cigarettes per day) every day for 30 weeks; and the control group, comprising 12 rats exposed to room air three times a day every day for 30 weeks. Lung function was assessed by mechanical ventilation, and emphysema was morphometrically assessed by measurement of the mean linear intercept (Lm). RESULTS: The mean weight gain was significantly (approximately ten times) lower in the cigarette smoke group than in the control group. The Lm was 25.0% higher in the cigarette smoke group. There was a trend toward worsening of lung function parameters in the cigarette smoke group. CONCLUSIONS: The new murine model of cigarette smoke-induced emphysema and the methodology employed in the present study are effective and reproducible, representing a promising and economically viable option for use in studies investigating the pathophysiology of and therapeutic approaches to COPD. PMID:24626269

TIMING APPARATUS

DOEpatents

Bennett, A.E.; Geisow, J.C.H.

1956-04-17

The timing device comprises an escapement wheel and pallet, a spring drive to rotate the escapement wheel to a zero position, means to wind the pretensioned spring proportional to the desired signal time, and a cam mechanism to control an electrical signal switch by energizing the switch when the spring has been wound to the desired position, and deenergizing it when it reaches the zero position. This device produces an accurately timed signal variably witain the control of the operator.

HYDRAULIC SERVO CONTROL MECHANISM

DOEpatents

Hussey, R.B.; Gottsche, M.J. Jr.

1963-09-17

A hydraulic servo control mechanism of compact construction and low fluid requirements is described. The mechanism consists of a main hydraulic piston, comprising the drive output, which is connected mechanically for feedback purposes to a servo control piston. A control sleeve having control slots for the system encloses the servo piston, which acts to cover or uncover the slots as a means of controlling the operation of the system. This operation permits only a small amount of fluid to regulate the operation of the mechanism, which, as a result, is compact and relatively light. This mechanism is particuiarly adaptable to the drive and control of control rods in nuclear reactors. (auth)

Comparison of cytokines and prooxidants/antioxidants markers among adults with refractory versus well-controlled epilepsy: A cross-sectional study.

PubMed

Ethemoglu, Ozlem; Ay, Halil; Koyuncu, Ismail; Gönel, Ataman

2018-06-15

This study aims to investigate the serum adiponectin, interleukin (IL)-6 and oxidative stress in epilepsy patients who are refractory or non-refractory to treatments. The study comprised 31 refractory epilepsy, 29 well-controlled epilepsy patients and control group including 29 healthy individuals. The serum adiponectin, IL-6, total antioxidant status (TAS), total oxidant status levels (TOS) and oxidative stress index (OSİ) were determined. The mean serum adiponectin and TAS levels were significantly lower in the refractory epilepsy patients than in the healty controls, and mean IL-6, TOS and OSİ levels were significantly higher. The serum adiponectin, IL-6, TAS, TOS and OSI levels were not significantly different between the well-controlled epilepsy patients and the healthy controls. The mean serum IL-6 and oxidative stress levels in refractory epilepsy patients were higher and the serum adiponectin level was lower than the healthy control group. These findings may be associated with an increased risk of seizures, atherosclerosis and cardiovascular disease in refractory epilepsy patients. Copyright © 2018 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

[Damage control in trauma patients with hemodynamic instability].

PubMed

Müller, Thorben; Doll, Dietrich; Kliebe, Frank; Ruchholtz, Steffen; Kühne, Christian

2010-10-01

The term "Damage-control" is borrowed from naval terminology. It means the initial control of a damaged ship. Because of the lethal triad in multiple injured patients the classical concept of definitive surgically therapy in the acute phase of the injury has a high rate of complications such as exsanguination, sepsis, heart failure and multiple organ failure. The core idea of the damage control concept was to minimize the additional trauma by surgical operations in these critical patients in the first phase. This means temporary control of a hemorrhage and measures for stopping abdominal contamination. After 24 - 48 hours in the intensive care unit and correction of physiological disturbances further interventions are performed for definitively treatment of the injuries. Summarized, the damage control strategy comprises an abbreviated operation, intensive care unit resuscitation, and a return to the operating room for the definitive operation after hemodynamic stabilisation of the patient. © Georg Thieme Verlag Stuttgart · New York.

Nanoscale mass conveyors

DOEpatents

Regan, Brian C [Oakland, CA; Aloni, Shaul [Albany, CA; Zettl, Alexander K [Kensington, CA

2008-03-11

A mass transport method and device for individually delivering chargeable atoms or molecules from source particles is disclosed. It comprises a channel; at least one source particle of chargeable material fixed to the surface of the channel at a position along its length; a means of heating the channel; and a means for applying an controllable electric field along the channel, whereby the device transports the atoms or molecules along the channel in response to applied electric field. In a preferred embodiment, the mass transport device will comprise a multiwalled carbon nanotube (MWNT), although other one dimensional structures may also be used. The MWNT or other structure acts as a channel for individual or small collections of atoms due to the atomic smoothness of the material. Also preferred is a source particle of a metal such as indium. The particles move by dissociation into small units, in some cases, individual atoms. The particles are preferably less than 100 nm in size.

Control methods and valve arrangement for start-up and shutdown of pressurized combustion and gasification systems integrated with a gas turbine

DOEpatents

Provol, Steve J.; Russell, David B.; Isaksson, Matti J.

1994-01-01

A power plant having a system for converting coal to power in a gas turbine comprises a coal fed pressurized circulating bed for converting coal to pressurized gases, a gas turbine having a compressor for pressurizing air for the pressurized circulating bed and expander for receiving and expanding hot combustion gases for powering a generator, a first fast acting valve for controlling the pressurized air, a second fast acting valve means for controlling pressurized gas from the compressor to the expander.

ELECTRONIC MULTIPLIER CIRCUIT

DOEpatents

Thomas, R.E.

1959-08-25

An electronic multiplier circuit is described in which an output voltage having an amplitude proportional to the product or quotient of the input signals is accomplished in a novel manner which facilitates simplicity of circuit construction and a high degree of accuracy in accomplishing the multiplying and dividing function. The circuit broadly comprises a multiplier tube in which the plate current is proportional to the voltage applied to a first control grid multiplied by the difference between voltage applied to a second control grid and the voltage applied to the first control grid. Means are provided to apply a first signal to be multiplied to the first control grid together with means for applying the sum of the first signal to be multiplied and a second signal to be multiplied to the second control grid whereby the plate current of the multiplier tube is proportional to the product of the first and second signals to be multiplied.

Ground potential rise monitor

DOEpatents

Allen, Zachery Warren; Zevenbergen, Gary Allen

2012-07-17

A device and method for detecting ground potential rise (GPR) comprising a first electrode, a second electrode, and a voltage attenuator. The first electrode and the second electrode are both electrically connected to the voltage attenuator. A means for determining the presence of a dangerous ground potential is connected to the voltage attenuator. The device and method further comprises a means for enabling one or more alarms upon the detection of the dangerous ground potential. Preferably, a first transmitter/receiver is connected to the means for enabling one or more alarms. Preferably, a second transmitter/receiver, comprising a button, is electromagnetically connected to the first transmitter/receiver. Preferably, the means for determining the presence of a dangerous ground potential comprises a means for determining the true RMS voltage at the output of the voltage attenuator, a transient detector connected to the output of the voltage attenuator, or a combination thereof.

Fiber fed x-ray/gamma ray imaging apparatus

DOEpatents

Hailey, C.J.; Ziock, K.P.

1992-06-02

X-ray/gamma ray imaging apparatus is disclosed for detecting the position, energy, and intensity of x-ray/gamma ray radiation comprising scintillation means disposed in the path of such radiation and capable of generating photons in response to such radiation; first photodetection means optically bonded to the scintillation means and capable of generating an electrical signal indicative of the intensity, and energy of the radiation detected by the scintillation means; second photodetection means capable of generating an electrical signal indicative of the position of the radiation in the radiation pattern; and means for optically coupling the scintillation means to the second photodetection means. The photodetection means are electrically connected to control and storage means which may also be used to screen out noise by rejecting a signal from one photodetection means not synchronized to a signal from the other photodetection means; and also to screen out signals from scattered radiation. 6 figs.

Random pulse generator

NASA Technical Reports Server (NTRS)

Lindsey, R. S., Jr. (Inventor)

1975-01-01

An exemplary embodiment of the present invention provides a source of random width and random spaced rectangular voltage pulses whose mean or average frequency of operation is controllable within prescribed limits of about 10 hertz to 1 megahertz. A pair of thin-film metal resistors are used to provide a differential white noise voltage pulse source. Pulse shaping and amplification circuitry provide relatively short duration pulses of constant amplitude which are applied to anti-bounce logic circuitry to prevent ringing effects. The pulse outputs from the anti-bounce circuits are then used to control two one-shot multivibrators whose output comprises the random length and random spaced rectangular pulses. Means are provided for monitoring, calibrating and evaluating the relative randomness of the generator.

Rim inertial measuring system

NASA Technical Reports Server (NTRS)

Groom, N. J.; Anderson, W. W.; Phillips, W. H. (Inventor)

1981-01-01

The invention includes an angular momentum control device (AMCD) having a rim and several magnetic bearing stations. The AMCD is in a strapped down position on a spacecraft. Each magnetic bearing station comprises means, including an axial position sensor, for controlling the position of the rim in the axial direction; and means, including a radial position sensor, for controlling the position of the rim in the radial direction. A first computer receives the signals from all the axial position sensors and computes the angular rates about first and second mutually perpendicular axes in the plane of the rim and computes the linear acceleration along a third axis perpendicular to the first and second axes. A second computer receives the signals from all the radial position sensors and computes the linear accelerations along the first and second axes.

Method for controlling gas metal arc welding

DOEpatents

Smartt, Herschel B.; Einerson, Carolyn J.; Watkins, Arthur D.

1989-01-01

The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections.

Inactive lifestyles and sedentary behavior in persons with chronic aneurysmal subarachnoid hemorrhage: evidence from accelerometer-based activity monitoring.

PubMed

Harmsen, Wouter J; Ribbers, Gerard M; Heijenbrok-Kal, Majanka H; Bussmann, Johannes B J; Sneekes, Emiel M; Khajeh, Ladbon; van Kooten, Fop; Neggers, Sebastian J C M M; van den Berg-Emons, Rita J

2017-11-23

Aneurysmal subarachnoid hemorrhage (a-SAH) is a potential life-threatening stroke. Because survivors may be at increased risk for inactive and sedentary lifestyles, this study evaluates physical activity (PA) and sedentary behavior (SB) in the chronic phase after a-SAH. PA and SB were objectively measured at six months post a-SAH with an accelerometer-based activity monitor, with the aim to cover three consecutive weekdays. Total time spent in PA (comprising walking, cycling, running and non-cyclic movement) and SB (comprising sitting and lying) was determined. Also, in-depth analyses were performed to determine the accumulation and distribution of PA and SB throughout the day. Binary time series were created to determine the mean bout length and the fragmentation index. Measures of PA and SB in persons with a-SAH were compared to those in sex- and age-matched healthy controls. The 51 participants comprised 33 persons with a-SAH and 18 controls. None of the participants had signs of paresis or spasticity. Persons with a-SAH spent 105 min/24 h being physically active, which was 35 min/24 h less than healthy controls (p = 0.005). For PA, compared with healthy controls, the mean bout length was shorter in those with a-SAH (12.0 vs. 13.5 s, p = 0.006) and the fragmentation index was higher (0.053 vs. 0.041, p < 0.001). Total sedentary time during waking hours showed no significant difference between groups (514 min vs. 474 min, p = 0.291). For SB, the mean bout length was longer in persons with a-SAH (122.3 vs. 80.5 s, p = 0.024), whereas there was no difference in fragmentation index between groups (0.0032 vs 0.0036, p = 0.396). Persons with a-SAH are less physically active, they break PA time into shorter periods, and SB periods last longer compared to healthy controls. Since inactive lifestyles and prolonged uninterrupted periods of SB are independent risk factors for poor cardiovascular health, interventions seem necessary and should target both PA and SB. Dutch registry number: NTR 2085.

Evaluation of tensile strength and surface topography of orthodontic wires after infection control procedures: An in vitro study

PubMed Central

Brindha, M.; Kumaran, N. Kurunji; Rajasigamani, K.

2014-01-01

Aim: The aim of this study is to evaluate, the influence of four types of sterilization/disinfection procedures (autoclave, hot air oven, glutaraldehyde, and ultraviolet [UV] light) on the tensile strength and surface topography of three orthodontic wires (stainless steel (SS), titanium - molybdenum alloy [TMA], and cobalt chromium (CoCr)). Materials and Methods: Sample comprised of three types of 8 inches straight length segments of orthodontic wires. They were divided into three groups according to wire composition comprising of 50 samples each. Totally 50 samples of each group were then equally divided into five subgroups according to sterilization method. After sterilization and disinfection of the experimental group, surface topography was examined with scanning electron microscope (SEM) and tensile strength was tested using universal testing machine. Result: The results of this study show that the mean ultimate tensile strength (UTS) of SS wire after four sterilization procedures were similar to the control group (1845.815 ± 142.29 MPa). The mean UTS of TMA wire increases after four sterilization procedures when compared with the control group (874.107 ± 275.939 MPa). The mean UTS of CoCr wire remains same after UV light disinfection, but increases after other three sterilization procedures when compared with the control group (1449.759 ± 156.586 MPa). SEM photographs of the present study shows gross increase in pitting roughness of the surface topography of all the three types of wires after four types of sterilization. Conclusion: Orthodontists who want to offer maximum safety for their patients can sterilize orthodontic wires before placement, as it does not deteriorate the tensile strength and surface roughness of the alloys. PMID:25210383

Evaluation of tensile strength and surface topography of orthodontic wires after infection control procedures: An in vitro study.

PubMed

Brindha, M; Kumaran, N Kurunji; Rajasigamani, K

2014-07-01

The aim of this study is to evaluate, the influence of four types of sterilization/disinfection procedures (autoclave, hot air oven, glutaraldehyde, and ultraviolet [UV] light) on the tensile strength and surface topography of three orthodontic wires (stainless steel (SS), titanium - molybdenum alloy [TMA], and cobalt chromium (CoCr)). Sample comprised of three types of 8 inches straight length segments of orthodontic wires. They were divided into three groups according to wire composition comprising of 50 samples each. Totally 50 samples of each group were then equally divided into five subgroups according to sterilization method. After sterilization and disinfection of the experimental group, surface topography was examined with scanning electron microscope (SEM) and tensile strength was tested using universal testing machine. The results of this study show that the mean ultimate tensile strength (UTS) of SS wire after four sterilization procedures were similar to the control group (1845.815 ± 142.29 MPa). The mean UTS of TMA wire increases after four sterilization procedures when compared with the control group (874.107 ± 275.939 MPa). The mean UTS of CoCr wire remains same after UV light disinfection, but increases after other three sterilization procedures when compared with the control group (1449.759 ± 156.586 MPa). SEM photographs of the present study shows gross increase in pitting roughness of the surface topography of all the three types of wires after four types of sterilization. Orthodontists who want to offer maximum safety for their patients can sterilize orthodontic wires before placement, as it does not deteriorate the tensile strength and surface roughness of the alloys.

Early hyperbaric oxygen treatment for nonarteritic central retinal artery obstruction.

PubMed

Menzel-Severing, Johannes; Siekmann, Ullrich; Weinberger, Andreas; Roessler, Gernot; Walter, Peter; Mazinani, Babac

2012-03-01

To compare hyperbaric oxygen treatment combined with hemodilution with hemodilution only in central retinal artery obstruction. Retrospective, nonrandomized case series. We reviewed records of all our patients diagnosed with central retinal artery obstruction between 1997 and 2010. In these patients, hyperbaric oxygen and hemodilution therapy had been administered routinely (oxygen group). Where hyperbaric oxygenation could not be performed, patients were underwent hemodilution only (control group). Patients with presenting visual acuity (VA) of up to 20/200 within 12 hours of onset were included in our analysis. Exclusion criteria included cilioretinal vessels or arteritic occlusion. The oxygen group comprised 51 patients, and the control group comprised 29 patients. Mean baseline VA was counting fingers (oxygen group) and 20/1000 (control group; P = .1). Most other potential confounders, including duration of symptoms, also did not differ significantly at baseline. In the oxygen group, mean VA improvement was 3 lines (P < .0001). This was sustained over a follow-up of 3 months (P = .01). In the control group, mean improvement was 1 line (P = .23 at discharge, P = .17 at follow-up). Differences between both groups were not significant (P = .07 at discharge, P = .26 at follow-up). The number of patients gaining 3 lines or more was 38.0% versus 17.9% at discharge (P = .06) and 35.7% versus 30.8% at follow-up (P = .76). We saw significant VA improvement after the combined treatment, but not when using hemodilution only. Confirming superiority of the combination treatment requires a randomized, prospective trial. A high number of nonresponders highlights the need to improve our understanding and treatment of hypoxia-related metabolic insults after central retinal artery obstruction. Copyright © 2012 Elsevier Inc. All rights reserved.

Using Video Modeling to Teach Complex Social Sequences to Children with Autism

ERIC Educational Resources Information Center

Nikopoulos, Christos K.; Keenan, Mickey

2007-01-01

This study comprised of two experiments was designed to teach complex social sequences to children with autism. Experimental control was achieved by collecting data using means of within-system design methodology. Across a number of conditions children were taken to a room to view one of the four short videos of two people engaging in a simple…

Sleep Disturbances, Behavioural Problems and Adaptive Skills in Children with Down's Syndrome

ERIC Educational Resources Information Center

Kelmanson, Igor A.

2017-01-01

The study was performed in St. Petersburg in 2015 and comprised 34 children with diagnosed Down's syndrome (DS) aged 9-15 (mean 11) years (17 boys, 17 girls) who attended special schools. Control group was made up of 34 clinically healthy normal intelligence schoolchildren matched for age, sex and geographical distribution. The mothers were…

Self-pumping impurity control

DOEpatents

Brooks, Jeffrey N.; Mattas, Richard F.

1991-01-01

Apparatus for removing the helium ash from a fusion reactor having a D-T plasma comprises a helium trapping site within the reactor plasma confinement device, said trapping site being formed of a trapping material having negligible helium solubility and relatively high hydrogen solubility; and means for depositing said trapping material on said site at a rate sufficient to prevent saturation of helium trapping.

NEUTRONIC REACTOR CONTROL

DOEpatents

Hurwitz, H. Jr.

1960-04-01

An apparatus is described for indicating the approach to prompt criticality of a neutronic reactor and comprises means for oscillating an absorber in the reactor, a detector for measuring neutron flux in the reactor, two channels into which the output of the detector can be directed, one of which includes a narrow band filter with band pass frequency equal to that of the oscillator, and means for indicating the ratio of the signal produced by the channel with the filter to the signal produced by the other channel, which constitutes an indication of the approach to prompt criticality.

Does adenosine deaminase activity play a role in the early diagnosis of ectopic pregnancy?

PubMed

Turkmen, G G; Karçaaltıncaba, D; Isık, H; Fidancı, V; Kaayalp, D; Tımur, H; Batıoglu, S

2016-01-01

Early diagnosis of ectopic pregnancy (EP) is important due to life-threatening consequences in the first trimester of pregnancy. In this study we aimed to investigate the role of adenosine deaminase (ADA) activity in the prediction of EP. Forty-one patients with unruptured ectopic pregnancy comprised the case group and forty-two first trimester pregnant women with shown foetal heart beating in ultrasound comprised the control group. The mean ADA level in EP (10.9 ± 3.0 IU/L) was higher than that in control group (9.2 ± 3.6 IU/L) (p = 0.018). Receiver operating characteristics or ROC curve identified ADA value of 10.95 IU/L as optimal threshold for the prediction of EP with 56% sensitivity and 67% specificity. High ADA levels are valuable in the early diagnosis of EP. However more comprehensive studies are required.

Active terahertz metamaterial devices

DOEpatents

Chen, Houtong; Padilla, Willie John; Averitt, Richard Douglas; O'Hara, John F.; Lee, Mark

2010-11-02

Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Each element within an array of metamaterial (MM) elements comprises multiple loops and at least one gap. The MM elements may comprise resonators with conductive loops and insulated gaps, or the inverse in which insulated loops are present with conductive gaps; each providing useful transmissive control properties. The metamaterial elements are fabricated on a semiconducting substrate configured with a means of enhancing or depleting electrons from near the gaps of the MM elements. An on to off transmissivity ratio of about 0.5 is achieved with this approach. Embodiments are described in which the MM elements incorporated within a Quantum Cascade Laser (QCL) to provide surface emitting (SE) properties.

Droplet actuator analyzer with cartridge

NASA Technical Reports Server (NTRS)

Sturmer, Ryan A. (Inventor); Paik, Philip Y. (Inventor); Srinivasan, Vijay (Inventor); Brafford, Keith R. (Inventor); West, Richard M. (Inventor); Smith, Gregory F. (Inventor); Pollack, Michael G. (Inventor); Pamula, Vamsee K. (Inventor)

2011-01-01

A droplet actuator with cartridge is provided. According to one embodiment, a sample analyzer is provided and includes an analyzer unit comprising electronic or optical receiving means, a cartridge comprising self-contained droplet handling capabilities, and a wherein the cartridge is coupled to the analyzer unit by a means which aligns electronic and/or optical outputs from the cartridge with electronic or optical receiving means on the analyzer unit. According to another embodiment, a sample analyzer is provided and includes a sample analyzer comprising a cartridge coupled thereto and a means of electrical interface and/or optical interface between the cartridge and the analyzer, whereby electrical signals and/or optical signals may be transmitted from the cartridge to the analyzer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Michael D.; Dater, Manasi; Whitaker, Ross

In this study, statistical shape modeling (SSM) was used to quantify three-dimensional (3D) variation and morphologic differences between femurs with and without cam femoroacetabular impingement (FAI). 3D surfaces were generated from CT scans of femurs from 41 controls and 30 cam FAI patients. SSM correspondence particles were optimally positioned on each surface using a gradient descent energy function. Mean shapes for control and patient groups were defined from the resulting particle configurations. Morphological differences between group mean shapes and between the control mean and individual patients were calculated. Principal component analysis was used to describe anatomical variation present in bothmore » groups. The first 6 modes (or principal components) captured statistically significant shape variations, which comprised 84% of cumulative variation among the femurs. Shape variation was greatest in femoral offset, greater trochanter height, and the head-neck junction. The mean cam femur shape protruded above the control mean by a maximum of 3.3 mm with sustained protrusions of 2.5-3.0 mm along the anterolateral head-neck junction and distally along the anterior neck, corresponding well with reported cam lesion locations and soft-tissue damage. This study provides initial evidence that SSM can describe variations in femoral morphology in both controls and cam FAI patients and may be useful for developing new measurements of pathological anatomy. SSM may also be applied to characterize cam FAI severity and provide templates to guide patient-specific surgical resection of bone.« less

Method for controlling gas metal arc welding

DOEpatents

Smartt, H.B.; Einerson, C.J.; Watkins, A.D.

1987-08-10

The heat input and mass input in a Gas Metal Arc welding process are controlled by a method that comprises calculating appropriate values for weld speed, filler wire feed rate and an expected value for the welding current by algorithmic function means, applying such values for weld speed and filler wire feed rate to the welding process, measuring the welding current, comparing the measured current to the calculated current, using said comparison to calculate corrections for the weld speed and filler wire feed rate, and applying corrections. 3 figs., 1 tab.

Universal collisional activation ion trap mass spectrometry

DOEpatents

McLuckey, S.A.; Goeringer, D.E.; Glish, G.L.

1993-04-27

A universal collisional activation ion trap comprises an ion trapping means containing a bath gas and having connected thereto a noise signal generator. A method of operating a universal collisional activation ion trap comprises the steps of: providing an ion trapping means; introducing into the ion trapping means a bath gas; and, generating a noise signal within the ion trapping means; introducing into the ion trapping means a substance that, when acted upon by the noise signal, undergoes collisional activation to form product ions.

Universal collisional activation ion trap mass spectrometry

DOEpatents

McLuckey, Scott A.; Goeringer, Douglas E.; Glish, Gary L.

1993-01-01

A universal collisional activation ion trap comprises an ion trapping means containing a bath gas and having connected thereto a noise signal generator. A method of operating a universal collisional activation ion trap comprises the steps of: providing an ion trapping means; introducing into the ion trapping means a bath gas; and, generating a noise signal within the ion trapping means; introducing into the ion trapping means a substance that, when acted upon by the noise signal, undergoes collisional activation to form product ions.

Automatic calibration and control system for a combined oxygen and combustibles analyzer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woolbert, G.D.; Jewett, S.Y.; Robertson, J.W. Jr.

1989-08-01

This patent describes an automatic, periodically calibrating system for continuous output of calibrated signals from a combined oxygen and combustibles analyzer. It comprises: a combined oxygen and combustibles analyzer for sensing a level of oxygen and a level of combustibles in a volatile atmosphere and for producing a first sample signal indicative of the oxygen level and a second sample signal indicative of the combustibles level; means for introducing zero and span calibration test gases into the analyzer; means for periodically calibrating the analyzer. This including: a data control unit; a timer unit; a mechanical unit, means for calculating zeromore » and span values for oxygen and combustibles, means for comparing the calculated zero and span values for oxygen and combustibles to the preset alarm limits for oxygen and combustibles, means for activating an operator alarm, means for calculating oxygen and combustibles drift adjustments, a memory unit; and means for applying the oxygen and combustibles drift adjustments concurrently to the first and second sample signals, according to predetermined mathematical relationship, to obtain calibrated output signals indicative of the oxygen and combustibles level in the volatile atmosphere.« less

Combustion products generating and metering device

NASA Technical Reports Server (NTRS)

Wiberg, R. E.; Klisch, J. A. (Inventor)

1971-01-01

An apparatus for generating combustion products at a predetermined fixed rate, mixing the combustion products with air to achieve a given concentration, and distributing the resultant mixture to an area or device to be tested is described. The apparatus is comprised of blowers, a holder for the combustion product generating materials (which burn at a predictable and controlled rate), a mixing plenum chamber, and a means for distributing the air combustion product mixture.

Skylab

NASA Image and Video Library

1972-09-01

The Multiple Docking Adapter (MDA), designed and constructed under the direction of the Marshall Space Flight Center, was one of four principal sections comprising Skylab. The MDA provided the means by which the Command and Service Modules attached to the Skylab, enabling the crews to enter and work in it. Also included in the MDA was a control and display console for the Apollo Telescope Mount. This image shows an interior view of the MDA.

Status of Homocysteine in Polycystic Ovary Syndrome (PCOS).

PubMed

Maleedhu, Priyanka; M, Vijayabhaskar; S S B, Sharma; Kodumuri, Praveen K; Devi D, Vasundhara

2014-02-01

Polycystic ovary syndrome (PCOS) is the most common endocrine disease in women of reproductive age and is estimated to affect 5-10 % of the population. Women with PCOS have a clustering of cardiovascular risk factors, such as obesity, dyslipidemia, impaired glucose tolerance and hypertension. Homocysteine has been recognized recently as a risk factor for cardiovascular diseases. Preliminary investigations suggest that high sensitivity C-reactive protein, homocysteine and adiponectin are abnormal in women with PCOS. The possible determinants of elevated homocysteine concentration are still debated among authors who found significant correlations between homocysteine and insulin resistance or hyperandrogenism. The purpose of this study is to evaluate homocysteine levels in the PCOS population compared with controls. Study group comprised of 142 women with PCOS and 65 healthy non-PCOS controls. Body mass index (BMI), Waist circumference and serum homocysteine were measured in PCOS subjects and age matched controls. Statastical Analysis: All values are expressed as mean α SD. The results obtained are analysed statistically using the unpaired student t-test to evaluate the significance of differences between the mean values. The mean BMI, Waist circumference and serum homocysteine values are significantly increased in PCOS subjects when compared with non PCOS controls. The present study has demonstrated increase in mean serum homocysteine concentrations in women with PCOS.

Reconfigurable data path processor

NASA Technical Reports Server (NTRS)

Donohoe, Gregory (Inventor)

2005-01-01

A reconfigurable data path processor comprises a plurality of independent processing elements. Each of the processing elements advantageously comprising an identical architecture. Each processing element comprises a plurality of data processing means for generating a potential output. Each processor is also capable of through-putting an input as a potential output with little or no processing. Each processing element comprises a conditional multiplexer having a first conditional multiplexer input, a second conditional multiplexer input and a conditional multiplexer output. A first potential output value is transmitted to the first conditional multiplexer input, and a second potential output value is transmitted to the second conditional multiplexer output. The conditional multiplexer couples either the first conditional multiplexer input or the second conditional multiplexer input to the conditional multiplexer output, according to an output control command. The output control command is generated by processing a set of arithmetic status-bits through a logical mask. The conditional multiplexer output is coupled to a first processing element output. A first set of arithmetic bits are generated according to the processing of the first processable value. A second set of arithmetic bits may be generated from a second processing operation. The selection of the arithmetic status-bits is performed by an arithmetic-status bit multiplexer selects the desired set of arithmetic status bits from among the first and second set of arithmetic status bits. The conditional multiplexer evaluates the select arithmetic status bits according to logical mask defining an algorithm for evaluating the arithmetic status bits.

Transitional Study of Patient-Controlled Analgesia Morphine With Ketorolac to Patient-Controlled Analgesia Morphine With Parecoxib Among Donors in Adult Living Donor Liver Transplantation: A Single-Center Experience.

PubMed

Lim, K-I; Liu, C-K; Chen, C-L; Wang, C-H; Huang, C-J; Cheng, K-W; Wu, S-C; Shih, T-H; Yang, S-C; Lee, Y-E; Jawan, B; Juang, S-E

2016-05-01

In this study, as our center transitions from using patient-controlled analgesia (PCA) morphine with intravenous (IV) ketorolac to PCA morphine with IV parecoxib, the two regimens are compared in terms of quality of pain control. Post-operative pain management sheets were collected retrospectively among the living donors of liver transplantation during this transitional period. Group parecoxib was given plain PCA morphine. A single dose of IV parecoxib 40 mg was given 30 minutes before the end of surgery. Group ketorolac was given PCA morphine pre-mixed ketorolac with a concentration of 1.87 mg/mL. Daily and total morphine consumption, Visual Analog Score (VAS), and number of rescue attempts made up to 3 post-operative days, together with satisfaction score and incidence of side effects of PCA usage, were analyzed and compared by means of the Mann-Whitney U test; a value of P < .05 was regarded as significant, and data are given as mean ± SD. Fifty patients were analyzed; group 1 comprised 21 patients and group 2 comprised 29 patients. There was no difference between group 1 and group 2 in terms of daily VAS. PCA morphine requirements were significantly lower at day 2 and day 3 in group 1. However, the total overall morphine usage and satisfactory score was not statistically different (P = .863, P = .052). A single dose of IV parecoxib 40 mg can provide satisfactory pain control when paired with PCA morphine for donors undergoing living donor liver transplantation. The use of parecoxib in the multimodal analgesia regimen has similar efficacy, with possibly less morphine consumption, when compared with ketorolac. Copyright © 2016 Elsevier Inc. All rights reserved.

Real-time combustion controls and diagnostics sensors (CCADS)

DOEpatents

Thornton, Jimmy D.; Richards, George A.; Dodrill, Keith A.; Nutter, Jr., Roy S.; Straub, Douglas

2005-05-03

The present invention is directed to an apparatus for the monitoring of the combustion process within a combustion system. The apparatus comprises; a combustion system, a means for supplying fuel and an oxidizer, a device for igniting the fuel and oxidizer in order to initiate combustion, and a sensor for determining the current conducted by the combustion process. The combustion system comprises a fuel nozzle and an outer shell attached to the combustion nozzle. The outer shell defines a combustion chamber. Preferably the nozzle is a lean premix fuel nozzle (LPN). Fuel and an oxidizer are provided to the fuel nozzle at separate rates. The fuel and oxidizer are ignited. A sensor positioned within the combustion system comprising at least two electrodes in spaced-apart relationship from one another. At least a portion of the combustion process or flame is between the first and second electrodes. A voltage is applied between the first and second electrodes and the magnitude of resulting current between the first and second electrodes is determined.

Controlled method of reducing electrophoretic mobility of macromolecules, particles, or cells

NASA Technical Reports Server (NTRS)

Vanalstine, James M. (Inventor)

1992-01-01

A method of reducing electrophoretic mobility of macromolecules, particles, cells, and other substances is provided which comprises interacting in a conventional electrophoretic separating procedure, the substances with a polymer-linked affinity compound comprised of a hydrophilic neutral polymer such as polyethylene glycol bound to a second component such as a hydrophobic compound, an immunocompound such as an antibody or antibody active fragment, or a ligand such as a hormone, drug, antigen, or a hapten. The reduction of electrophoretic mobility achieved is directly proportional to the concentration of the polymer-linked affinity compound employed, and such reduction can comprise up to 100 percent for particular particles and cells. The present invention is advantageous in that electrophoretic separation can now be achieved for substances whose native surface charge structure had prevented them from being separated by normal electrophoretic means. Depending on the affinity component utilized, separation can be achieved on the basis of the specific/irreversible, specific/reversible, semi-specific/reversible, relatively nonspecific/reversible, or relatively nonspecific/irreversible ligand-substance interactions.

Planar solid oxide fuel cell with staged indirect-internal air and fuel preheating and reformation

DOEpatents

Geisbrecht, Rodney A; Williams, Mark C

2003-10-21

A solid oxide fuel cell arrangement and method of use that provides internal preheating of both fuel and air in order to maintain the optimum operating temperature for the production of energy. The internal preheat passes are created by the addition of two plates, one on either side of the bipolar plate, such that these plates create additional passes through the fuel cell. This internal preheat fuel cell configuration and method reduce the requirements for external heat exchanger units and air compressors. Air or fuel may be added to the fuel cell as required to maintain the optimum operating temperature through a cathode control valve or an anode control valve, respectively. A control loop comprises a temperature sensing means within the preheat air and fuel passes, a means to compare the measured temperature to a set point temperature and a determination based on the comparison as to whether the control valves should allow additional air or fuel into the preheat or bypass manifolds of the fuel cell.

Preventing Child Sexual Abuse: Body Safety Training for Young Children in Turkey.

PubMed

Citak Tunc, Gulseren; Gorak, Gulay; Ozyazicioglu, Nurcan; Ak, Bedriye; Isil, Ozlem; Vural, Pinar

2018-01-01

The "Body Safety Training Program" is an education program aimed at ensuring children are informed about their body and acquire self-protection skills. In this study, a total of 83 preschoolers were divided into experimental and control groups; based on a power analysis, 40 children comprised the experimental group, while 43 children comprised the control group. The "Body Safety Training Programme" was translated into Turkish and content validity was determined regarding the language and cultural appropriateness. The "What If Situations Test" (WIST) was administered to both groups before and after the training. Mann-Whitney U Test, Kruskal-Wallis Variance Analysis, and the Wilcoxon Signed Ranks Test were used to compare between the groups and the Spearman correlation analysis was used to determine the strength of the relationship between the dependent and independent variable. The differences between the pretest and posttest scores for the subscales (appropriate recognition, inappropriate recognition, say, do, tell, and reporting skills), and the personal safety questionnaire (PSQ) score means for the children in the experimental group were found to be statistically significant (p < .001). The posttest-pretest difference score means of the experimental group children for WIST saying, doing, telling and reporting, total skills, and PSQ were found to be statistically significant as compared to that of the control group (p < .05). The "Body Safety Training programme" is effective in increasing the child sexual abuse prevention and self-protection skills in Turkish young children.

Real-time simulation clock

NASA Technical Reports Server (NTRS)

Bennington, Donald R. (Inventor); Crawford, Daniel J. (Inventor)

1990-01-01

The invention is a clock for synchronizing operations within a high-speed, distributed data processing network. The clock is actually a distributed system comprising a central clock and multiple site clock interface units (SCIUs) which are connected by means of a fiber optic star network and which operate under control of separate clock software. The presently preferred embodiment is a part of the flight simulation system now in current use at the NASA Langley Research Center.

Multipulsed dynamic moire interferometer

DOEpatents

Deason, Vance A.

1991-01-01

An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

Multiple acousto-optic q-switch

DOEpatents

Deason, Vance A.

1993-01-01

An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

Multiple acousto-optic q-switch

DOEpatents

Deason, Vance A.

1993-12-07

An improved dynamic moire interferometer comprised of a lasing medium providing a plurality of beams of coherent light, a multiple q-switch producing multiple trains of 100,000 or more pulses per second, a combining means collimating multiple trains of pulses into substantially a single train and directing beams to specimen gratings affixed to a test material, and a controller, triggering and sequencing the emission of the pulses with the occurrence and recording of a dynamic loading event.

High-resolution radiography by means of a hodoscope

DOEpatents

De Volpi, Alexander

1978-01-01

The fast neutron hodoscope, a device that produces neutron radiographs with coarse space resolution in a short time, is modified to produce neutron or gamma radiographs of relatively thick samples and with high space resolution. The modification comprises motorizing a neutron and gamma collimator to permit a controlled scanning pattern, simultaneous collection of data in a number of hodoscope channels over a period of time, and computerized image reconstruction of the data thus gathered.

Wireline tool cable head overload apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roessler, D.E.

1990-05-29

This patent describes a cable head adapted to support a sonde in a well borehole. It comprises: an upper end assembly adapted for connection with a cable extending into a well borehole; a lower end assembly adapted for connection to a sonde to be supported by the cable in the well borehole; yieldable means joining the upper and lower assemblies together in a fixed but yieldable relationship wherein a controllable and variable load is imparted to the cable there above during movement and variations in load on the cable are maintained within specified limits; the yieldable means further including deadmore » weight adjustable means notwithstanding variations in the dead weight of the load, and the yieldable means includes resilient means permitting movements within a desired range dependent on the adjustment thereof and bracketing a selected relative position of the upper and lower end assemblies; and an electrical contact.« less

Rapid road repair vehicle

DOEpatents

Mara, Leo M.

1999-01-01

Disclosed are improvments to a rapid road repair vehicle comprising an improved cleaning device arrangement, two dispensing arrays for filling defects more rapidly and efficiently, an array of pre-heaters to heat the road way surface in order to help the repair material better bond to the repaired surface, a means for detecting, measuring, and computing the number, location and volume of each of the detected surface imperfection, and a computer means schema for controlling the operation of the plurality of vehicle subsystems. The improved vehicle is, therefore, better able to perform its intended function of filling surface imperfections while moving over those surfaces at near normal traffic speeds.

Compact reaction cell for homogenizing and down-blending highly enriched uranium metal

DOEpatents

McLean, W. II; Miller, P.E.; Horton, J.A.

1995-05-02

The invention is a specialized reaction cell for converting uranium metal to uranium oxide. In a preferred form, the reaction cell comprises a reaction chamber with increasing diameter along its length (e.g. a cylindrical chamber having a diameter of about 2 inches in a lower portion and having a diameter of from about 4 to about 12 inches in an upper portion). Such dimensions are important to achieve the necessary conversion while at the same time affording criticality control and transportability of the cell and product. The reaction chamber further comprises an upper port and a lower port, the lower port allowing for the entry of reactant gases into the reaction chamber, the upper port allowing for the exit of gases from the reaction chamber. A diffuser plate is attached to the lower port of the reaction chamber and serves to shape the flow of gas into the reaction chamber. The reaction cell further comprises means for introducing gases into the reaction chamber and a heating means capable of heating the contents of the reaction chamber. The present invention also relates to a method for converting uranium metal to uranium oxide in the reaction cell of the present invention. The invention is useful for down-blending highly enriched uranium metal by the simultaneous conversion of highly enriched uranium metal and natural or depleted uranium metal to uranium oxide within the reaction cell. 4 figs.

Compact reaction cell for homogenizing and down-blanding highly enriched uranium metal

DOEpatents

McLean, II, William; Miller, Philip E.; Horton, James A.

1995-01-01

The invention is a specialized reaction cell for converting uranium metal to uranium oxide. In a preferred form, the reaction cell comprises a reaction chamber with increasing diameter along its length (e.g. a cylindrical chamber having a diameter of about 2 inches in a lower portion and having a diameter of from about 4 to about 12 inches in an upper portion). Such dimensions are important to achieve the necessary conversion while at the same time affording criticality control and transportability of the cell and product. The reaction chamber further comprises an upper port and a lower port, the lower port allowing for the entry of reactant gasses into the reaction chamber, the upper port allowing for the exit of gasses from the reaction chamber. A diffuser plate is attached to the lower port of the reaction chamber and serves to shape the flow of gas into the reaction chamber. The reaction cell further comprises means for introducing gasses into the reaction chamber and a heating means capable of heating the contents of the reaction chamber. The present invention also relates to a method for converting uranium metal to uranium oxide in the reaction cell of the present invention. The invention is useful for down-blending highly enriched uranium metal by the simultaneous conversion of highly enriched uranium metal and natural or depleted uranium metal to uranium oxide within the reaction cell.

Theobromine for the treatment of persistent cough: a randomised, multicentre, double-blind, placebo-controlled clinical trial

PubMed Central

McGarvey, Lorcan; Pavord, Ian D.; Higgins, Bernard; Chung, Kian Fan; Birring, Surinder S.

2017-01-01

Background To investigate the effect of BC1036 on health-related quality of life (QOL) in subjects with persistent cough. The secondary objective was to investigate the effect of BC1036 on subjective cough severity. Methods This was a randomised, multicentre, double-blind, placebo-controlled, parallel-group study in 289 subjects with persistent cough. Subjects received BC1036 or placebo twice daily for 14 days. The primary endpoint comprised cough-related QOL assessed using the validated Leicester Cough Questionnaire (LCQ) at Day 14. Secondary endpoints comprised the LCQ scores at Day 7 and Day 28, cough severity VAS scores at each visit and pulmonary function tests. Results At baseline, mean total LCQ score in the BC1036 group was lower (i.e., worse QOL) than placebo (P<0.001), indicating significant between-group heterogeneity. Mean baseline-adjusted change in LCQ score at Day 14 was greater for BC1036 [mean (SD) 2.4±3.5] compared to placebo [mean (SD) score 2.2±3.0], but did not reach statistical significance (P=0.60). Mean cough severity VAS score decreased to a greater extent in the BC1036 group compared to placebo, but again the results were not statistically significant (−12.2±23.28 in BC1036 group and −11.0±21.34 in placebo group at Day 14, P=0.688). There was no significant change in pulmonary function measurements. The adverse event (AE) profile was similar in both groups. Conclusions This study showed that BC1036 was well tolerated and, although the primary endpoint did not achieve statistical significance, the magnitude of improvement was greater with BC1036 compared to placebo with respect to improving QOL and reducing cough severity. Clinical trial registration ClinicalTrials.gov: NCT01656668. PMID:28839984

REGULATOR FOR CALUTRON ION SOURCE

DOEpatents

Miller, B.F.

1958-09-01

Improvements are described in electric discharge devices and circuits for a calutron and, more specifically, presents an arc discharge regulator circuit for the ion source of the calatron. In general, the source comprises a filament which bombards a cathode with electrons, a griid control electrode between the filament and the cathode, and an anode electrode. The control electrode has a DC potential which is varied in response to changes in the anode current flow by means of a saturable reactor installed in its power supply energizing line having the anode current flowing through its control winding. In this manner the bombardment current to the cathode may be decreased when the anode current increases beyond a predetermined level.

System for loading executable code into volatile memory in a downhole tool

DOEpatents

Hall, David R.; Bartholomew, David B.; Johnson, Monte L.

2007-09-25

A system for loading an executable code into volatile memory in a downhole tool string component comprises a surface control unit comprising executable code. An integrated downhole network comprises data transmission elements in communication with the surface control unit and the volatile memory. The executable code, stored in the surface control unit, is not permanently stored in the downhole tool string component. In a preferred embodiment of the present invention, the downhole tool string component comprises boot memory. In another embodiment, the executable code is an operating system executable code. Preferably, the volatile memory comprises random access memory (RAM). A method for loading executable code to volatile memory in a downhole tool string component comprises sending the code from the surface control unit to a processor in the downhole tool string component over the network. A central processing unit writes the executable code in the volatile memory.

Efficacy of Topical Alpha Ointment (Containing Natural Henna) Compared to Topical Hydrocortisone (1%) in the Healing of Radiation-Induced Dermatitis in Patients with Breast Cancer: A Randomized Controlled Clinical Trial

PubMed Central

Ansari, Mansour; Dehsara, Farzin; Mosalaei, Ahmad; Omidvari, Shapour; Ahmadloo, Niloofar; Mohammadianpanah, Mohammad

2013-01-01

Background: This two-arm, randomized clinical study aimed to compare efficacy between topical Alpha ointment and topical hydrocortisone cream (1%) in the healing of radiation-induced dermatitis in breast cancer patients. Methods: The inclusion criteria comprised newly pathologically proven, locally advanced breast cancer (treated with modified radical mastectomy followed by sequential adjuvant treatments, including chest wall radiotherapy [45-50.4 Gy]) and grade 2 and/or 3 chest wall dermatitis. The exclusion criteria were comprised of any underlying disease or medications interfering with the wound healing process, previous history of chest wall radiotherapy, and concurrent use of chemotherapy. Sixty eligible patients were randomly assigned to use either topical Alpha ointment (study arm, n=30) or topical hydrocortisone cream (1%) (control arm, n=30) immediately after receiving a total dose of 45-50 Gy chest wall radiotherapy. Results: The mean radiation dose was 49.1 Gy in the control arm and 48.8 Gy in the study arm. The mean dermatitis area was 13.54 cm2 in the control arm and 17.02 cm2 in the study arm. Topical Alpha ointment was more effective on the healing of radiation-induced dermatitis than was topical hydrocortisone cream (1%) (P=0.001). This effect was significant in the second week (P=0.007). In addition, Alpha ointment decreased the patients’ complaints such as pain (P<0.001), pruritus (P=0.009), and discharge (P=0.010) effectively and meaningfully. Conclusion: Topical Alpha ointment was more effective on the healing of radiation-induced dermatitis than was topical hydrocortisone cream (1%) in our patients with breast cancer. Trial Registration Numbers: IRCT201206099979N1, ACTRN12612000837820 PMID:24293782

Efficacy of topical alpha ointment (containing natural henna) compared to topical hydrocortisone (1%) in the healing of radiation-induced dermatitis in patients with breast cancer: a randomized controlled clinical trial.

PubMed

Ansari, Mansour; Farzin, Dehsara; Mosalaei, Ahmad; Omidvari, Shapour; Ahmadloo, Niloofar; Mohammadianpanah, Mohammad

2013-12-01

This two-arm, randomized clinical study aimed to compare efficacy between topical Alpha ointment and topical hydrocortisone cream (1%) in the healing of radiation-induced dermatitis in breast cancer patients. The inclusion criteria comprised newly pathologically proven, locally advanced breast cancer (treated with modified radical mastectomy followed by sequential adjuvant treatments, including chest wall radiotherapy [45-50.4 Gy]) and grade 2 and/or 3 chest wall dermatitis. The exclusion criteria were comprised of any underlying disease or medications interfering with the wound healing process, previous history of chest wall radiotherapy, and concurrent use of chemotherapy. Sixty eligible patients were randomly assigned to use either topical Alpha ointment (study arm, n=30) or topical hydrocortisone cream (1%) (control arm, n=30) immediately after receiving a total dose of 45-50 Gy chest wall radiotherapy. The mean radiation dose was 49.1 Gy in the control arm and 48.8 Gy in the study arm. The mean dermatitis area was 13.54 cm(2) in the control arm and 17.02 cm(2) in the study arm. Topical Alpha ointment was more effective on the healing of radiation-induced dermatitis than was topical hydrocortisone cream (1%) (P=0.001). This effect was significant in the second week (P=0.007). In addition, Alpha ointment decreased the patients' complaints such as pain (P<0.001), pruritus (P=0.009), and discharge (P=0.010) effectively and meaningfully. Topical Alpha ointment was more effective on the healing of radiation-induced dermatitis than was topical hydrocortisone cream (1%) in our patients with breast cancer. IRCT201206099979N1, ACTRN12612000837820.

Detrimental effects of west to east transmeridian flight on jump performance.

PubMed

Chapman, Dale W; Bullock, Nicola; Ross, Angus; Rosemond, Doug; Martin, David T

2012-05-01

It is perceived that long haul travel, comprising of rapid movement across several time zones is detrimental to performance in elite athletes. However, available data is equivocal on the impact of long haul travel on maximal explosive movements. The aim of this study was to quantify the impact of long haul travel on lower body muscle performance. Five elite Australian skeleton athletes (1 M, 4 F) undertook long haul flight from Australia to Canada (LH(travel)), while seven national team Canadian skeleton athletes (1 M, 6 F) acted as controls (NO(travel)). Lower body power assessments were performed once per day between 09:30 and 11:00 h local time for 11 days. Lower body power tests comprised of box drop jumps, squat jump (SJ) and countermovement jumps (CMJ). The LH(travel) significantly decreased peak and mean SJ velocity but not CMJ velocity in the days following long haul flight. CMJ height but not SJ height decreased significantly in the LH(travel) group. The peak velocity, mean velocity and jump power eccentric utilisation ratio for the LH(travel) group all significantly increased 48 h after long haul flight. Anecdotally athletes perceived themselves as 'jet-lagged' and this corresponded with disturbances observed in 'one-off' daily jumping ability between 09:30 and 11:00 h after eastward long haul travel from Australia to North America when compared to non-travel and baseline controls.

Autogenic-feedback training improves pilot performance during emergency flying conditions

NASA Technical Reports Server (NTRS)

Kellar, Michael A.; Folen, Raymond A.; Cowings, Patricia S.; Toscano, William B.; Hisert, Glen L.

1994-01-01

Studies have shown that autonomous mode behavior is one cause of aircraft fatalities due to pilot error. In such cases, the pilot is in a high state of psychological and physiological arousal and tends to focus on one problem, while ignoring more critical information. This study examined the effect of training in physiological self-recognition and regulation, as a means of improving crew cockpit performance. Seventeen pilots were assigned to the treatment and control groups matched for accumulated flight hours. The treatment group comprised three pilots of HC-130 Hercules aircraft and four HH-65 Dolphin helicopter pilots; the control group comprised three pilots of HC-130's and six Dolphin helicopter pilots. During an initial flight, physiological data were recorded for each crew member and individual crew performance was rated by an instructor pilot. Eight crewmembers were then taught to regulate their own physiological response levels using Autogenic-Feedback Training (AFT). The remaining subjects received no training. During a second flight, treatment subjects showed significant improvement in performance, while controls did not improve. The results indicate that AFT management of high states of physiological arousal may improve pilot performance during emergency flying conditions.

Autogenic-feedback training improves pilot performance during emergency flying conditions

NASA Technical Reports Server (NTRS)

Kellar, Michael A.; Folen, Raymond A.; Cowings, Patricia S.; Toscano, William B.; Hisert, Glen L.

1993-01-01

Studies have shown that autonomous mode behavior is one cause of aircraft fatalities due to pilot error. In such cases, the pilot is in a high state of psychological and physiological arousal and tends to focus on one problem, while ignoring more critical information. The effect of training in physiological self-recognition and regulation, as a means of improving crew cockpit performance was examined. Seventeen pilots were assigned to the treatment and control groups matched for accumulated flight hours. The treatment group comprised four pilots of HC-130 Hercules aircraft and four HH-65 Dolphin helicopter pilots; the control group comprised three pilots of HC-130's and six Dolphin helicopter pilots. During an initial flight physiological data were recorded for each crewmember and individual crew performance and rated by an instructor pilot. Eight crewmembers were then taught to regulate their own physiological response levels using Autogenic-Feedback Training (AFT). The remaining subjects received no training. During a second flight, treatment subjects showed significant improvement in performance, while controls did not improve. The results indicate that AFT management of high states of physiological arousal may improve pilot performance during emergency flying conditions.

Lack of genotoxicity in medical oncology nurses handling antineoplastic drugs: effect of work environment and protective equipment.

PubMed

Gulten, Tuna; Evke, Elif; Ercan, Ilker; Evrensel, Turkkan; Kurt, Ender; Manavoglu, Osman

2011-01-01

In this study we aimed to investigate the genotoxic effects of antineoplastic agents in occupationally exposed oncology nurses. Genotoxic effects mean the disruptive effects in the integrity of DNA and they are associated with cancer development. Biomonitoring of health care workers handling antineoplastic agents is helpful for the evaluation of exposure to cytostatics. The study included an exposed and two control groups. The exposed group (n=9) was comprised of oncology nurses. The first (n=9) and second (n=10) control groups were comprised of subjects who did not come into contact with antineoplastic drugs working respectively in the same department with oncology nurses and in different departments. Genotoxicity evaluation was performed using SCE analysis. After applying culture, harvest and chromosome staining procedures, a total of 25 metaphases were analyzed per person. Kruskal Wallis test was used to perform statistical analysis. A statistically significant difference of sister chromatid exchange frequencies was not observed between the exposed and control groups. Lack of genotoxicity in medical oncology nurses might be due to good working conditions with high standards of technical equipment and improved personal protection.

Intellectual Profiles in KBG-Syndrome: A Wechsler Based Case-Control Study

PubMed Central

van Dongen, Linde C. M.; Wingbermühle, Ellen; Oomens, Wouter; Bos-Roubos, Anja G.; Ockeloen, Charlotte W.; Kleefstra, Tjitske; Egger, Jos I. M.

2017-01-01

KBG syndrome is a neurodevelopmental disorder (NDD) caused by loss-of-function of the ANKRD11 gene. The core phenotype comprises developmental delay (DD)/ intellectual disability (ID) and several specific facial dysmorphisms. In addition, both ADHD- and ASD-related symptoms have been mentioned. For the correct understanding of these developmental and behavioral characteristics however, it is of great importance to apply objective measures, which seldom has been done in patients with KBG syndrome. In this study, intelligence profiles of patients with KBG syndrome (n = 18) were compared with a control group comprising patients with NDD caused by various other genetic defects (n = 17), by means of the Wechsler scales. These scales were also used to measure speed of information processing, working memory, verbal comprehension and perceptual reasoning. No significant differences were found in the global level of intelligence of patients with KBG syndrome as compared to the patient genetic control group. The same was true for Wechsler subtest results. Hence, behavioral problems associated with KBG syndrome cannot directly be related to or explained by a specific intelligence profile. Instead, specific assessment of neurocognitive functions should be performed to clarify the putative behavioral problems as observed in this syndrome. PMID:29311865

Transparent selective illumination means suitable for use in optically activated electrical switches and optically activated electrical switches constructed using same

DOEpatents

Wilcox, R.B.

1991-09-10

A planar transparent light conducting means and an improved optically activated electrical switch made using the novel light conducting means are disclosed. The light conducting means further comprise light scattering means on one or more opposite planar surfaces thereof to transmit light from the light conducting means into adjacent media and reflective means on other surfaces of the light conducting means not containing the light scattering means. The optically activated electrical switch comprises at least two stacked photoconductive wafers, each having electrodes formed on both surfaces thereof, and separated by the planar transparent light conducting means. The light scattering means on the light conducting means face surfaces of the wafers not covered by the electrodes to transmit light from the light conducting means into the photoconductive wafers to uniformly illuminate and activate the switch. 11 figures.

Transparent selective illumination means suitable for use in optically activated electrical switches and optically activated electrical switches constructed using same

DOEpatents

Wilcox, Russell B.

1991-01-01

A planar transparent light conducting means and an improved optically activated electrical switch made using the novel light conducting means are disclosed. The light conducting means further comprise light scattering means on one or more opposite planar surfaces thereof to transmit light from the light conducting means into adjacent media and reflective means on other surfaces of the light conducting means not containing the light scattering means. The optically activated electrical switch comprises at least two stacked photoconductive wafers, each having electrodes formed on both surfaces thereof, and separated by the planar transparent light conducting means. The light scattering means on the light conducting means face surfaces of the wafers not covered by the electrodes to transmit light from the light conducting means into the photoconductive wafers to uniformly illuminate and activate the switch.

Method and apparatus for detection of chemical vapors

DOEpatents

Mahurin, Shannon Mark [Knoxville, TN; Dai, Sheng [Knoxville, TN; Caja, Josip [Knoxville, TN

2007-05-15

The present invention is a gas detector and method for using the gas detector for detecting and identifying volatile organic and/or volatile inorganic substances present in unknown vapors in an environment. The gas detector comprises a sensing means and a detecting means for detecting electrical capacitance variance of the sensing means and for further identifying the volatile organic and volatile inorganic substances. The sensing means comprises at least one sensing unit and a sensing material allocated therein the sensing unit. The sensing material is an ionic liquid which is exposed to the environment and is capable of dissolving a quantity of said volatile substance upon exposure thereto. The sensing means constitutes an electrochemical capacitor and the detecting means is in electrical communication with the sensing means.

Ion-beam apparatus and method for analyzing and controlling integrated circuits

DOEpatents

Campbell, A.N.; Soden, J.M.

1998-12-01

An ion-beam apparatus and method for analyzing and controlling integrated circuits are disclosed. The ion-beam apparatus comprises a stage for holding one or more integrated circuits (ICs); a source means for producing a focused ion beam; and a beam-directing means for directing the focused ion beam to irradiate a predetermined portion of the IC for sufficient time to provide an ion-beam-generated electrical input signal to a predetermined element of the IC. The apparatus and method have applications to failure analysis and developmental analysis of ICs and permit an alteration, control, or programming of logic states or device parameters within the IC either separate from or in combination with applied electrical stimulus to the IC for analysis thereof. Preferred embodiments of the present invention including a secondary particle detector and an electron floodgun further permit imaging of the IC by secondary ions or electrons, and allow at least a partial removal or erasure of the ion-beam-generated electrical input signal. 4 figs.

Ion-beam apparatus and method for analyzing and controlling integrated circuits

DOEpatents

Campbell, Ann N.; Soden, Jerry M.

1998-01-01

An ion-beam apparatus and method for analyzing and controlling integrated circuits. The ion-beam apparatus comprises a stage for holding one or more integrated circuits (ICs); a source means for producing a focused ion beam; and a beam-directing means for directing the focused ion beam to irradiate a predetermined portion of the IC for sufficient time to provide an ion-beam-generated electrical input signal to a predetermined element of the IC. The apparatus and method have applications to failure analysis and developmental analysis of ICs and permit an alteration, control, or programming of logic states or device parameters within the IC either separate from or in combination with applied electrical stimulus to the IC for analysis thereof. Preferred embodiments of the present invention including a secondary particle detector and an electron floodgun further permit imaging of the IC by secondary ions or electrons, and allow at least a partial removal or erasure of the ion-beam-generated electrical input signal.

Asymmetric rapid maxillary expansion in true unilateral crossbite malocclusion: a prospective controlled clinical study.

PubMed

Ileri, Zehra; Basciftci, Faruk Ayhan

2015-03-01

To investigate the short-term effects of the asymmetric rapid maxillary (ARME) appliance on the vertical, sagittal, and transverse planes in patients with true unilateral posterior crossbite. Subjects were divided into two groups. The treatment group was comprised of 21 patients with unilateral posterior crossbite (mean age  =  13.3 ± 2.1 years). Members of this group were treated with the ARME appliance. The control group was comprised of 17 patients with Angle Class I who were kept under observation (mean age  =  12.3 ± 0.8 years). Lateral and frontal cephalograms were taken before the expansion (T1), immediately after expansion (T2), and at postexpansion retention (T3) in the treatment group and at preobservation (T1) and postobservation (T2) in the control group. A total of 34 measurements were assessed on cephalograms. For statistical analysis, the Wilcoxon test and analysis of covariance were used. The ARME appliance produced significant increases in nasal, maxillary base, upper arch, and lower arch dimensions (P < .01) and a clockwise rotation of the occlusal plane (P  =  .001). The ARME appliance created asymmetric increments in the transversal dimensions of the nose, maxilla, and upper arch in the short term. Asymmetric expansion therapy for subjects with unilateral maxillary deficiency may provide satisfactory outcomes in adolescents, with the exception of mandibular arch expansion. The triangular pattern of expansion caused clockwise rotation of the mandible and the occlusal plane and produced significant alterations in the vertical facial dimensions, whereas it created no displacement in maxilla in the sagittal plane.

Cognitive distortions among older adult gamblers in an Asian context.

PubMed

Subramaniam, Mythily; Chong, Siow Ann; Browning, Colette; Thomas, Shane

2017-01-01

The study aims to describe the construct of cognitive distortions based on the narratives of older adult gamblers (aged 60 years and above) in Singapore. Singapore residents (citizens or permanent residents) aged 60 years and above, who were current or past regular gamblers were included in the study. Participants were recruited using a combination of venue based approach, referrals from service providers as well as by snowball sampling. In all, 25 in-depth interviews were conducted with older adult gamblers. The six-step thematic network analysis methodology was adopted for data analysis. The mean age of the participants was 66.2 years. The majority were male (n = 18), of Chinese ethnicity (n = 16), with a mean age of gambling initiation at 24.5 years. Among older adult gamblers, cognitive distortions emerged as a significant global theme comprising three organizing themes-illusion of control, probability control and interpretive control. The organizing themes comprised nine basic themes: perception of gambling as a skill, near miss, concept of luck, superstitious beliefs, entrapment, gambler's fallacy, chasing wins, chasing losses, and beliefs that wins are more than losses. Cognitive distortions were endorsed by all gamblers in the current study and were shown to play a role in both maintaining and escalating the gambling behaviour. While the surface characteristics of the distortions had a culture-specific appearance, the deeper characteristics of the distortions may in fact be more universal than previously thought. Future research must include longitudinal studies to understand causal relationships between cognitive distortions and gambling as well as the role of culture-specific distortions both in the maintenance and treatment of the disorder.

A novel school-based intervention to improve nutrition knowledge in children: cluster randomised controlled trial

PubMed Central

2010-01-01

Background Improving nutrition knowledge among children may help them to make healthier food choices. The aim of this study was to assess the effectiveness and acceptability of a novel educational intervention to increase nutrition knowledge among primary school children. Methods We developed a card game 'Top Grub' and a 'healthy eating' curriculum for use in primary schools. Thirty-eight state primary schools comprising 2519 children in years 5 and 6 (aged 9-11 years) were recruited in a pragmatic cluster randomised controlled trial. The main outcome measures were change in nutrition knowledge scores, attitudes to healthy eating and acceptability of the intervention by children and teachers. Results Twelve intervention and 13 control schools (comprising 1133 children) completed the trial. The main reason for non-completion was time pressure of the school curriculum. Mean total nutrition knowledge score increased by 1.1 in intervention (baseline to follow-up: 28.3 to 29.2) and 0.3 in control schools (27.3 to 27.6). Total nutrition knowledge score at follow-up, adjusted for baseline score, deprivation, and school size, was higher in intervention than in control schools (mean difference = 1.1; 95% CI: 0.05 to 2.16; p = 0.042). At follow-up, more children in the intervention schools said they 'are currently eating a healthy diet' (39.6%) or 'would try to eat a healthy diet' (35.7%) than in control schools (34.4% and 31.7% respectively; chi-square test p < 0.001). Most children (75.5%) enjoyed playing the game and teachers considered it a useful resource. Conclusions The 'Top Grub' card game facilitated the enjoyable delivery of nutrition education in a sample of UK primary school age children. Further studies should determine whether improvements in nutrition knowledge are sustained and lead to changes in dietary behaviour. PMID:20219104

Aternating current photovoltaic building block

DOEpatents

Bower, Ward Issac; Thomas, Michael G.; Ruby, Douglas S.

2004-06-15

A modular apparatus for and method of alternating current photovoltaic power generation comprising via a photovoltaic module, generating power in the form of direct current; and converting direct current to alternating current and exporting power via one or more power conversion and transfer units attached to the module, each unit comprising a unitary housing extending a length or width of the module, which housing comprises: contact means for receiving direct current from the module; one or more direct current-to-alternating current inverters; an alternating current bus; and contact means for receiving alternating current from the one or more inverters.

Somatotypic characteristic of schizophrenic patients.

PubMed

Sivkov, Stefan; Akabaliev, Valentin; Nikolova, Yulia

2005-01-01

Introduction of quantitative metric methods of somatotype assessment in schizophrenic patients to make clinical diagnosis more objective, the diagnosis being otherwise based exclusively on the clinical interview and assessment of the mental status of patients and thus involving certain subjectivity. The study included 67 schizophrenic inpatients (38 men, 29 women) consecutively admitted to the Clinic of Psychiatry in Plovdiv. Their mean age was 31.47 years (SD = 9.43, range 16-56), mean duration of illness 6.86 (SD = 6.09, range 1-27), mean number of hospitalizations 4.22 (SD = 4.08, range 1-19). The patients satisfied DSM-IV criteria for a diagnosis of schizophrenia (American Psychiatric Association, 1994). The control group comprised 69 subjects (36 men, 33 women) with a mean age 39.24 years (SD = 10.18, range 22-68) and socioeconomic background matching that of the patients. The data showed statistically significant differences in the three somatotype component and in almost all somatotypological variables between male schizophrenic patients and control subjects. The somatotype categories were more extensively presented in the schizophrenic patients. There was a tendency to higher frequency of the ectomorphic categories (ectomorphic mesomorph, mesomorphic ectomorph and endomorph-ectomorph). No statistically significant differences were found in the somatotype components and somatotypological variables between the female schizophrenic patients and control subjects. The data of the examination of the somatotype of schizophrenic patients and control subjects evince a definite sexually related body constitution characteristic that differentiates the groups. Schizophrenic patients and control subjects are clearly determined somatotypically only in the group of males.

Position determination systems. [using orbital antenna scan of celestial bodies

NASA Technical Reports Server (NTRS)

Shores, P. W. (Inventor)

1976-01-01

A system for an orbital antenna, operated at a synchronous altitude, to scan an area of a celestial body is disclosed. The antenna means comprises modules which are operated by a steering signal in a repetitive function for providing a scanning beam over the area. The scanning covers the entire area in a pattern and the azimuth of the scanning beam is transmitted to a control station on the celestial body simultaneous with signals from an activated ground beacon on the celestial body. The azimuth of the control station relative to the antenna is known and the location of the ground beacon is readily determined from the azimuth determinations.

Electric circuit breaker comprising a plurality of vacuum interrupters simultaneously operated by a common operator

DOEpatents

Barkan, Philip; Imam, Imdad

1980-01-01

This circuit breaker comprises a plurality of a vacuum-type circuit interrupters, each having a movable contact rod. A common operating device for the interrupters comprises a linearly-movable operating member. The interrupters are mounted at one side of the operating member with their movable contact rods extending in a direction generally toward the operating member. Means is provided for mechanically coupling the operating member to the contact rods, and this means comprises a plurality of insulating operating rods, each connected at one end to the operating member and at its opposite end to one of the movable contact rods. The operating rods are of substantially equal length and have longitudinal axes that converge and intersect at substantially a common point.

Control System for Bearingless Motor-generator

NASA Technical Reports Server (NTRS)

Kascak, Peter E. (Inventor); Jansen, Ralph H. (Inventor); Dever, Timothy P. (Inventor)

2008-01-01

A control system for an electromagnetic rotary drive for bearingless motor-generators comprises a winding configuration comprising a plurality of individual pole pairs through which phase current flows, each phase current producing both a lateral force and a torque. A motor-generator comprises a stator, a rotor supported for movement relative to the stator, and a control system. The motor-generator comprises a winding configuration supported by the stator. The winding configuration comprises at least three pole pairs through which phase current flows resulting in three three-phase systems. Each phase system has a first rotor reference frame axis current that produces a levitating force with no average torque and a second rotor reference frame axis current that produces torque.

Control system for bearingless motor-generator

NASA Technical Reports Server (NTRS)

Jansen, Ralph H. (Inventor); Dever, Timothy P. (Inventor); Kascak, Peter E. (Inventor)

2010-01-01

A control system for an electromagnetic rotary drive for bearingless motor-generators comprises a winding configuration comprising a plurality of individual pole pairs through which phase current flows, each phase current producing both a lateral force and a torque. A motor-generator comprises a stator, a rotor supported for movement relative to the stator, and a control system. The motor-generator comprises a winding configuration supported by the stator. The winding configuration comprises at least three pole pairs through which phase current flows resulting in three three-phase systems. Each phase system has a first rotor reference frame axis current that produces a levitating force with no average torque and a second rotor reference frame axis current that produces torque.

Human factors in aviation operations: The hearback problem

NASA Technical Reports Server (NTRS)

Monan, William P.

1988-01-01

This report covers a study of ASRS reports wherein ATC controllers failed to monitor adequately (hearback) incorrect readbacks of ATC clearances. A total of 417 reports received over a period of 29 months from April 1981 through July 1983 comprised the study data set. Factors examined were: the reasons for a flight crew's getting clearances incorrectly, the operating factors that caused controllers to mishear or not hear the correct readbacks, and consequences of the various types of hearback misses. The principle conclusion of the study takes the form of a precaution to flight crews that a controller's not challenging a readback does not necessariliy mean the readback is correct and that flight crews must explicitly question any doubtful or unusual aspects of clearances rather than depending on controllers to detect readback errors.

Method for crystal growth control

DOEpatents

Yates, Douglas A.; Hatch, Arthur E.; Goldsmith, Jeff M.

1981-01-01

The growth of a crystalline body of a selected material is controlled so that the body has a selected cross-sectional shape. The apparatus is of the type which includes the structure normally employed in known capillary die devices as well as means for observing at least the portion of the surfaces of the growing crystalline body and the meniscus (of melt material from which the body is being pulled) including the solid/liquid/vapor junction in a direction substantially perpendicular to the meniscus surface formed at the junction when the growth of the crystalline body is under steady state conditions. The cross-sectional size of the growing crystalline body can be controlled by determining which points exhibit a sharp change in the amount of reflected radiation of a preselected wavelength and controlling the speed at which the body is being pulled or the temperature of the growth pool of melt so as to maintain those points exhibiting a sharp change at a preselected spatial position relative to a predetermined reference position. The improvement comprises reference object means positioned near the solid/liquid/vapor junction and capable of being observed by the means for observing so as to define said reference position so that the problems associated with convection current jitter are overcome.

Apparatus for consolidating a pre-impregnated, filament-reinforced polymeric prepreg material

NASA Technical Reports Server (NTRS)

Sandusky, Donald A. (Inventor)

1995-01-01

An apparatus and method were developed for providing a uniform, consolidated, unidirectional, continuous, fiber-reinforced polymeric material. The apparatus comprises a supply means, a forming means, a shaping means, and a take-up means. The forming means further comprises a pre-melting chamber and a stationary bar assembly. The shaping means is a loaded cooled nip-roller apparatus. Forming takes place by heating a polymeric prepreg material to a temperature where the polymer becomes viscous and applying pressure gradients at separate locations along the prepreg material. Upon exiting the forming means, the polymeric prepreg material is malleable, consolidated, and flattened. Shaping takes place by passing the malleable, consolidated, flattened prepreg material through a shaped, matched groove in a loaded, cooled nip-roller apparatus to provide the final solid product.

MEDICATION DISPOSAL AS A SOURCE FOR DRUGS AS ...

EPA Pesticide Factsheets

The major routes by which pharmaceuticals enter the environment are excretion, bathing, anddisposal of leftover, unwanted medications. Pharmaceuticals designed for humans and animalsoften remain unused. Leftover, accumulated drugs represent potentially environmentallyunsound disposal and suboptimal delivery of health care. They also can pose acute exposurerisks for humans and wildlife. Active pharmaceutical ingredients (APIs) directly enter theenvironment primarily via sewage. Among the three routes of entry, the relative contributions ofeach are poorly understood. In contrast to excretion, which as a source comprises continual lowlevelcontributions from multitudes of people, drug disposal comprises acute but transient andepisodic contributions from fewer people. The only route that is subject most easily to pollutionprevention or source control measures is disposal.A major unknown with respect to drugs as pollutants is what fractions of drug residues occurringin the ambient environment result from discarding leftover drugs. No studies exist that provideobjective data from well-defined populations to support any type of conclusion. Given theimportance of environmental stewardship to sustainability, a means for assessing the relativecontributions of APIs resulting from disposal would be useful in justifying the resources thatmight be devoted to controlling this source - - for example, by way of consumer

Detection of small interfering RNA (siRNA) by mass spectrometry procedures in doping controls.

PubMed

Thomas, Andreas; Walpurgis, Katja; Delahaut, Philippe; Kohler, Maxie; Schänzer, Wilhelm; Thevis, Mario

2013-01-01

Uncovering manipulation of athletic performance via small interfering (si)RNA is an emerging field in sports drug testing. Due to the potential to principally knock down every target gene in the organism by means of the RNA interference pathway, this facet of gene doping has become a realistic scenario. In the present study, two distinct model siRNAs comprising 21 nucleotides were designed as double strands which were perfect counterparts to a sequence of the respective messenger RNA coding the muscle regulator myostatin of Rattus norvegicus. Several modified nucleotides were introduced in both the sense and the antisense strand comprising phosphothioates, 2'-O-methylation, 2'-fluoro-nucleotides, locked nucleic acids and a cholesterol tag at the 3'-end. The model siRNAs were applied to rats at 1 mg/kg (i.v.) and blood as well as urine samples were collected. After isolation of the RNA by means of a RNA purification kit, the target analytes were detected by liquid chromatography - high resolution/high accuracy mass spectrometry (LC-HRMS). Analytes were detected as modified nucleotides after alkaline hydrolysis, as intact oligonucleotide strands (top-down) and by means of denaturing SDS-PAGE analysis. The gel-separated siRNA was further subjected to in-gel hydrolysis with different RNases and subsequent identification of the fragments by untargeted LC-HRMS analysis (bottom-up, 'experimental RNomics'). Combining the results of all approaches, the identification of several 3'-truncated urinary metabolites was accomplished and target analytes were detected up to 24 h after a single administration. Simultaneously collected blood samples yielded no promising results. The methods were validated and found fit-for-purpose for doping controls. Copyright © 2013 John Wiley & Sons, Ltd.

Method for treating a nuclear process off-gas stream

DOEpatents

Pence, Dallas T.; Chou, Chun-Chao

1984-01-01

Disclosed is a method for selectively removing and recovering the noble gas and other gaseous components typically emitted during nuclear process operations. The method is adaptable and useful for treating dissolver off-gas effluents released during reprocessing of spent nuclear fuels whereby to permit radioactive contaminant recovery prior to releasing the remaining off-gases to the atmosphere. Briefly, the method sequentially comprises treating the off-gas stream to preliminarily remove NO.sub.x, hydrogen and carbon-containing organic compounds, and semivolatile fission product metal oxide components therefrom; adsorbing iodine components on silver-exchanged mordenite; removing water vapor carried by said stream by means of a molecular sieve; selectively removing the carbon dioxide components of said off-gas stream by means of a molecular sieve; selectively removing xenon in gas phase by passing said stream through a molecular sieve comprising silver-exchanged mordenite; selectively separating krypton from oxygen by means of a molecular sieve comprising silver-exchanged mordenite; selectively separating krypton from the bulk nitrogen stream using a molecular sieve comprising silver-exchanged mordenite cooled to about -140.degree. to -160.degree. C.; concentrating the desorbed krypton upon a molecular sieve comprising silver-exchange mordenite cooled to about -140.degree. to -160.degree. C.; and further cryogenically concentrating, and the recovering for storage, the desorbed krypton.

Method for coating ultrafine particles, system for coating ultrafine particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jie; Liu, Yung

The invention provides a method for dispersing particles within a reaction field, the method comprising confining the particles to the reaction field using a standing wave. The invention also provides a system for coating particles, the system comprising a reaction zone; a means for producing fluidized particles within the reaction zone; a fluid to produce a standing wave within the reaction zone; and a means for introducing coating moieties to the reaction zone. The invention also provides a method for coating particles, the method comprising fluidizing the particles, subjecting the particles to a standing wave; and contacting the subjected particlesmore » with a coating moiety.« less

Method for fluidizing and coating ultrafine particles, device for fluidizing and coating ultrafine particles

DOEpatents

Li, Jie; Liu, Yung Y

2015-01-20

The invention provides a method for dispersing particles within a reaction field, the method comprising confining the particles to the reaction field using a standing wave. The invention also provides a system for coating particles, the system comprising a reaction zone; a means for producing fluidized particles within the reaction zone; a fluid to produce a standing wave within the reaction zone; and a means for introducing coating moieties to the reaction zone. The invention also provides a method for coating particles, the method comprising fluidizing the particles, subjecting the particles to a standing wave; and contacting the subjected particles with a coating moiety.

Fluorescent lamp unit with magnetic field generating means

DOEpatents

Grossman, Mark W.; George, William A.

1989-01-01

A fluorescent lamp unit having a magnetic field generating means for improving the performance of the fluorescent lamp is disclosed. In a preferred embodiment the fluorescent lamp comprises four longitudinally extending leg portions disposed in substantially quadrangular columnar array and joined by three generally U-shaped portions disposed in different planes. In another embodiment of the invention the magnetic field generating means comprises a plurality of permanent magnets secured together to form a single columnar structure disposed within a centrally located region defined by the shape of lamp envelope.

Fluorescent lamp unit with magnetic field generating means

DOEpatents

Grossman, M.W.; George, W.A.

1989-08-08

A fluorescent lamp unit having a magnetic field generating means for improving the performance of the fluorescent lamp is disclosed. In a preferred embodiment the fluorescent lamp comprises four longitudinally extending leg portions disposed in substantially quadrangular columnar array and joined by three generally U-shaped portions disposed in different planes. In another embodiment of the invention the magnetic field generating means comprises a plurality of permanent magnets secured together to form a single columnar structure disposed within a centrally located region defined by the shape of lamp envelope. 4 figs.

Bent shaft motor

DOEpatents

Benavides, Gilbert L.

1998-01-01

A nonelectromagnetic motor comprising a base, a bent shaft which is rotable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor.

Bent shaft motor

DOEpatents

Benavides, G.L.

1998-05-05

A nonelectromagnetic motor comprising a base, a bent shaft which is rotatable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor. 11 figs.

Solar receiver heliostat reflector having a linear drive and position information system

DOEpatents

Horton, Richard H.

1980-01-01

A heliostat for a solar receiver system comprises an improved drive and control system for the heliostat reflector assembly. The heliostat reflector assembly is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e., heat receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The improved drive system includes linear stepping motors which comprise low weight, low cost, electronic pulse driven components. One embodiment comprises linear stepping motors controlled by a programmed, electronic microprocessor. Another embodiment comprises a tape driven system controlled by a position control magnetic tape.

Method of producing molybdenum-99

DOEpatents

Pitcher, Eric John

2013-05-28

Method of producing molybdenum-99, comprising accelerating ions by means of an accelerator; directing the ions onto a metal target so as to generate neutrons having an energy of greater than 10 MeV; directing the neutrons through a converter material comprising techentium-99 to produce a mixture comprising molybdenum-99; and, chemically extracting the molybdenum-99 from the mixture.

Electrochemical energy storage device based on carbon dioxide as electroactive species

DOEpatents

Nemeth, Karoly; van Veenendaal, Michel Antonius; Srajer, George

2013-03-05

An electrochemical energy storage device comprising a primary positive electrode, a negative electrode, and one or more ionic conductors. The ionic conductors ionically connect the primary positive electrode with the negative electrode. The primary positive electrode comprises carbon dioxide (CO.sub.2) and a means for electrochemically reducing the CO.sub.2. This means for electrochemically reducing the CO.sub.2 comprises a conductive primary current collector, contacting the CO.sub.2, whereby the CO.sub.2 is reduced upon the primary current collector during discharge. The primary current collector comprises a material to which CO.sub.2 and the ionic conductors are essentially non-corrosive. The electrochemical energy storage device uses CO.sub.2 as an electroactive species in that the CO.sub.2 is electrochemically reduced during discharge to enable the release of electrical energy from the device.

Air lifted and propelled vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, T.E.; Johnson, R.A.

1987-02-17

This patent describes a vehicle which rides on air cushion and which is propelled by air, comprising: upper deck means, having a bottom edge which defines the periphery of an area; a thin, flexible sheet located below the upper deck means, extending beneath the bottom edge and secured beneath the bottom edge for defining a plenum that is defined by and closed off by the upper deck means and the sheet. The deck means is shaped within the area defined by its bottom edge for causing the plenum to always be an open space and the upper deck means ismore » rigid enough to maintain that open condition of the plenum; the sheet being secured in a manner permitting the sheet to pillow when air is pressurized in the plenum; and the sheet being perforated below the upper deck means for permitting exit of air from the plenum at a controllable rate through the perforations; the sheet having a large plurality of the perforations dispersed over most of its area below the upper deck means; each of the perforations being a hole.« less

Open apex shaped charge-type explosive device having special disc means with slide surface thereon to influence movement of open apex shaped charge liner during collapse of same during detonation

DOEpatents

Murphy, Michael J.

1993-01-01

An open apex shape charge explosive device is disclosed having an inner liner defining a truncated cone, an explosive charge surrounding the truncated inner liner, a primer charge, and a disc located between the inner liner and the primer charge for directing the detonation of the primer charge around the end edge of the disc means to the explosive materials surrounding the inner liner. The disc comprises a material having one or more of: a higher compressive strength, a higher hardness, and/or a higher density than the material comprising the inner liner, thereby enabling the disc to resist deformation until the liner collapses. The disc has a slide surface thereon on which the end edge of the inner liner slides inwardly toward the vertical axis of the device during detonation of the main explosive surrounding the inner liner, to thereby facilitate the inward collapse of the inner liner. In a preferred embodiment, the geometry of the slide surface is adjusted to further control the collapse or .beta. angle of the inner liner.

Open apex shaped charge-type explosive device having special disc means with slide surface thereon to influence movement of open apex shaped charge liner during collapse of same during detonation

DOEpatents

Murphy, M.J.

1993-10-12

An open apex shape charge explosive device is disclosed having an inner liner defining a truncated cone, an explosive charge surrounding the truncated inner liner, a primer charge, and a disc located between the inner liner and the primer charge for directing the detonation of the primer charge around the end edge of the disc means to the explosive materials surrounding the inner liner. The disc comprises a material having one or more of: a higher compressive strength, a higher hardness, and/or a higher density than the material comprising the inner liner, thereby enabling the disc to resist deformation until the liner collapses. The disc has a slide surface thereon on which the end edge of the inner liner slides inwardly toward the vertical axis of the device during detonation of the main explosive surrounding the inner liner, to thereby facilitate the inward collapse of the inner liner. In a preferred embodiment, the geometry of the slide surface is adjusted to further control the collapse or [beta] angle of the inner liner. 12 figures.

Cooling system for radiator and condenser of vehicles with an air conditioner and method of operating the same

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shimada, Y.; Obata, Y.; Takeoka, T.

1987-04-21

A cooling system is described for radiator and condenser of vehicles with an air conditioner having a first blower and a second blower for cooling the radiator and the condenser so as to cool the engine cooling water and so as to condense the coolant, and a cooling cycle operation switch which comprises: (a) engine cooling water temperature switch (SW1) connected between a power supply and the first blower and turned on and off in accordance with high and low temperature conditions of the engine cooling water; (b) relay switching means for controlling the first and second blowers in accordancemore » with the on-off conditions of the cooling cycle operation switch; and (c) a control circuit having an on-off switch and a solenoid and connected between the relay switching means and either the first blower or the second blower, the solenoid of the control circuit being connected to switches (SW3, SW4 and SW5) for electrical equipment such as headlights, wipers; whereby, when any one of the switches for the electrical equipment of the vehicle is turned off, the first and second blowers are operated at normal speed through the relay switching means and the control circuit, upon the operation of the cooling cycle operation switch, while when any one of the switches for the electrical equipment is turned on, the first blower is on-off controlled through the engine cooling water temperature switch (SW1) and the second blower remains operated through the relay switching means.« less

Thin films of mixed metal compounds

DOEpatents

Mickelsen, R.A.; Chen, W.S.

1985-06-11

Disclosed is a thin film heterojunction solar cell, said heterojunction comprising a p-type I-III-IV[sub 2] chalcopyrite substrate and an overlying layer of an n-type ternary mixed metal compound wherein said ternary mixed metal compound is applied to said substrate by introducing the vapor of a first metal compound to a vessel containing said substrate from a first vapor source while simultaneously introducing a vapor of a second metal compound from a second vapor source of said vessel, said first and second metals comprising the metal components of said mixed metal compound; independently controlling the vaporization rate of said first and second vapor sources; reducing the mean free path between vapor particles in said vessel, said gas being present in an amount sufficient to induce homogeneity of said vapor mixture; and depositing said mixed metal compound on said substrate in the form of a uniform composition polycrystalline mixed metal compound. 5 figs.

Maternal caregiving and girls’ depressive symptoms and antisocial behavior trajectories: An examination among high-risk youth

PubMed Central

Harold, Gordon T.; Leve, Leslie D.; Kim, Hyoun K.; Mahedy, Liam; Gaysina, Darya; Thapar, Anita; Collishaw, Stephan

2014-01-01

Past research has identified parental depression and family-of-origin maltreatment as precursors to adolescent depression and antisocial behavior. Caregiving experiences have also been identified as a factor that may ameliorate or accentuate adolescent psychopathology trajectories. Using the unique attributes of two geographically diverse, yet complementary longitudinal research designs, the present study examined the role of maternal caregiver involvement as a factor that promotes resilience-based trajectories related to depressive symptom and antisocial behaviors among adolescent girls. The first sample comprises a group of US-based adolescent girls in foster care (n = 100; mean age = 11.50 years), all of whom have had a history of childhood maltreatment and removal from the home of their biological parent(s). The second sample comprises a group of UK-based adolescent girls at high familial risk for depression (n = 145; mean age = 11.70 years), with all girls having a biological mother who has experienced recurrent depression. Study analyses examined the role of maternal caregiving on girls’ trajectories of depression and antisocial behavior, while controlling for levels of co-occurring psychopathology at each time point across the study period. Results suggest increasing trajectories of depressive symptoms, controlling for antisocial behavior, for girls at familial risk for depression, but decreasing trajectories for girls in foster care. A similar pattern of results was noted for antisocial behavior trajectories, controlling for depressive symptoms. Maternal caregiver involvement was differentially related to intercept and slope parameters in both samples. Results are discussed with respect to the identification of family level promotive factors aimed at reducing negative developmental trajectories among high-risk youth. PMID:25422973

The prevalence of glaucoma in patients undergoing surgery for eyelid entropion or ectropion

PubMed Central

Golan, Shani; Rabina, Gilad; Kurtz, Shimon; Leibovitch, Igal

2016-01-01

Purpose and design The aim of this study was to establish the prevalence of known glaucoma in patients undergoing ectropion or entropion surgical repair. In this study, retrospective review of case series was performed. Participants All patients who underwent ectropion or entropion surgery in a tertiary medical center between 2007 and 2014 were included. The etiology of eyelid malpositioning was involutional or cicatricial. Methods The medical files of the study participants were reviewed for the presence and type of glaucoma, medical treatment, duration of treatment, and the amount of drops per day. These data were compared to a matched control group of 101 patients who underwent blepharoplasty for dermatochalasis in the same department during the same period. Main outcome measure In this study, the prevalence of glaucoma in individuals with ectropion or entropion was the main outcome measure. Results A total of 227 patients (57% men, mean age: 79.2 years) who underwent ectropion or entropion surgery comprised the study group and 101 patients who underwent upper blepharoplasty for dermatochalasis comprised the control group. Compared to four patients in the control group (4%, P=0.01), 30 of the study patients (13.2%) had coexisting glaucoma. Of 30 glaucomatous patients, 25 had primary open-angle glaucoma for a mean duration of 10.3 years. The glaucomatous patients were treated with an average of 2.7 antiglaucoma medications. Conclusion An increased prevalence of known glaucoma in patients undergoing ectropion or entropion repair surgery was found. This observation may indicate that the chronic usage of topical anti-glaucoma eyedrops may lead to an increased risk of developing eyelid malpositions, especially in elderly patients. PMID:27785003

Cognitive distortions among older adult gamblers in an Asian context

PubMed Central

Subramaniam, Mythily; Chong, Siow Ann; Browning, Colette; Thomas, Shane

2017-01-01

Aims The study aims to describe the construct of cognitive distortions based on the narratives of older adult gamblers (aged 60 years and above) in Singapore. Methods Singapore residents (citizens or permanent residents) aged 60 years and above, who were current or past regular gamblers were included in the study. Participants were recruited using a combination of venue based approach, referrals from service providers as well as by snowball sampling. In all, 25 in-depth interviews were conducted with older adult gamblers. The six-step thematic network analysis methodology was adopted for data analysis. Results The mean age of the participants was 66.2 years. The majority were male (n = 18), of Chinese ethnicity (n = 16), with a mean age of gambling initiation at 24.5 years. Among older adult gamblers, cognitive distortions emerged as a significant global theme comprising three organizing themes–illusion of control, probability control and interpretive control. The organizing themes comprised nine basic themes: perception of gambling as a skill, near miss, concept of luck, superstitious beliefs, entrapment, gambler’s fallacy, chasing wins, chasing losses, and beliefs that wins are more than losses. Conclusions Cognitive distortions were endorsed by all gamblers in the current study and were shown to play a role in both maintaining and escalating the gambling behaviour. While the surface characteristics of the distortions had a culture-specific appearance, the deeper characteristics of the distortions may in fact be more universal than previously thought. Future research must include longitudinal studies to understand causal relationships between cognitive distortions and gambling as well as the role of culture-specific distortions both in the maintenance and treatment of the disorder. PMID:28542389

Control groups in recent septic shock trials: a systematic review.

PubMed

Pettilä, Ville; Hjortrup, Peter Buhl; Jakob, Stephan M; Wilkman, Erika; Perner, Anders; Takala, Jukka

2016-12-01

The interpretation of septic shock trial data is profoundly affected by patients, control intervention, co-interventions and selected outcome measures. We evaluated the reporting of control groups in recent septic shock trials. We searched for original articles presenting randomized clinical trials (RCTs) in adult septic shock patients from 2006 to 2016. We included RCTs focusing on septic shock patients with at least two parallel groups and at least 50 patients in the control group. We selected and evaluated data items regarding patients, control group characteristics, and mortality outcomes, and calculated a data completeness score to provide an overall view of quality of reporting. A total of 24 RCTs were included (mean n = 287 patients and 71 % of eligible patients were randomized). Of the 24 studies, 14 (58 %) presented baseline data on vasopressors and 58 % the proportion of patients with elevated lactate values. Five studies (21 %) provided data to estimate the proportion of septic shock patients fulfilling the Sepsis-3 definition. The mean data completeness score was 19 out of 36 (range 8-32). Of 18 predefined control group characteristics, a mean of 8 (range 2-17) were reported. Only 2 (8 %) trials provided adequate data to confirm that their control group treatment represented usual care. Recent trials in septic shock provide inadequate data on the control group treatment and hemodynamic values. We propose a standardized trial dataset to be created and validated, comprising characteristics of patient population, interventions administered, hemodynamic values achieved, surrogate organ dysfunction, and mortality outcomes, to allow better analysis and interpretation of future trial results.

An investigation into the kinematics of 2 cervical manipulation techniques.

PubMed

Williams, Jonathan M; Cuesta-Vargas, Antonio I

2013-01-01

The purpose of this study was to quantify the kinematics of the premanipulative position, the angular displacement, and velocity of thrust of 2 commonly used cervical spine manipulative procedures using inertial sensor technology. Thirteen asymptomatic subjects (7 females; mean age, 25.3 years; mean height, 170.9 cm; mean weight, 65.3 kg) received a right-handed and left-handed downslope and upslope manipulation, aimed at C4/5 while cervical kinematics were measured using an inertial sensor mounted on the forehead of the subject. One therapist used the upslope, and another therapist, the downslope, as was their preferred method. t tests were used to compare techniques and handiness. The results demonstrated differences in the kinematics between the 2 techniques. The downslope manipulation was associated with a mean premanipulative position of 24.8° side bending and 2.7° rotation, thrust displacement magnitude comprising of 4.5° side bending and 5.4° rotation with thrust velocity comprising, on average, of 57.5°/s side bending and 74.8°/s rotation. Upslope premanipulation was on average comprised of 30.1° side bending and 8.4° rotation, thrust displacement comprised of 4.5° side bending and 12.7° rotation with thrust velocity comprising of 75.9°/s side bending and 194.7°/s rotation. The results of this study demonstrate that there are different kinematic patterns for these 2 manipulative techniques. Copyright © 2013 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

Refrigeration system oil measurement and sampling device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, J.A.

1989-09-19

This patent describes a sampling device for use with a refrigeration system having a refrigerant and oil entrained therein. It comprises: an elongated reservoir having a stepped bore therein for receiving refrigerant and oil carried thereby. The reservoir comprising a large bore diameter upper section having an index marking the fill level of the reservoir and a small bore diameter lower section having graduation marks for oil level measurement. The upper and lower sections comprising transparent material to allow observation of the contents, first valve means for coupling the reservoir to the refrigeration system to admit liquid refrigerant to themore » reservoir, second valve means for selectively coupling the reservoir to the low pressure side of the refrigeration system or to a vacuum line to evacuate vaporized refrigerant from the reservoir, and means for supplying heat to the refrigerant in the bore to facilitate vaporization of the refrigerant.« less

Outcomes of Arthroscopic Rotator Cuff Repair in Patients Who Are 70 Years of Age or Older Versus Under 70 Years of Age: A Sex- and Tear Size-Matched Case-Control Study.

PubMed

Gwark, Ji-Yong; Sung, Chang-Meen; Na, Jae-Boem; Park, Hyung Bin

2018-05-19

To compare the structural and clinical outcomes after arthroscopic rotator cuff repair (ARCR) of a case group aged 70 and above with those of a control group younger than 70, with the 2 groups matched for sex and tear size. The case group, comprising 53 patients 70 or older, and the control group, comprising 159 patients younger than 70, all received ARCR to 1 shoulder with symptomatic full-thickness rotator cuff tear. The case and the control subjects, who were matched for sex and tear size to minimize bias related to tendon healing, received ARCR during the same period. The mean age was 71.8 ± 2.6 years in the case group and 59.3 ± 7.1 years in the control group. The minimum follow-up period was 1 year in both groups. Cuff integrity was evaluated using ultrasonography. Structural and clinical outcomes of the 2 groups were compared. Regarding structural outcomes, the complete healing, partial-thickness retear, and full-thickness retear rates were 66% (35/53), 15% (8/53), and 19% (10/53) in the case group, and 68% (108/159), 19% (30/159), and 13% (21/159), respectively, in the control group. The 2 groups had no significantly different retear rates (P = .52). Regarding clinical outcomes, the mean improvements in range of motion, pain, muscle strength, and age- and sex-matched Constant scores were not significantly different between the 2 groups (P > .37). The preoperative tear size was significantly associated with retear in both studied groups (P = .02). The clinical and structural outcomes of ARCR in patients 70 or older with symptomatic full-thickness rotator cuff tear are comparable with those in patients younger than 70 with at least 1-year follow-up. Preoperative tear size, a biological factor, is a strong predictor for retear. Level III, a retrospective comparative (case-control) study. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Supplemental heating of deposition tooling shields

DOEpatents

Ohlhausen, James A.; Peebles, Diane E.; Hunter, John A.; Eckelmeyer, Kenneth H.

2000-01-01

A method of reducing particle generation from the thin coating deposited on the internal surfaces of a deposition chamber which undergoes temperature variation greater than 100.degree. C. comprising maintaining the temperature variation of the internal surfaces low enough during the process cycle to keep thermal expansion stresses between the coating and the surfaces under 500 MPa. For titanium nitride deposited on stainless steel, this means keeping temperature variations under approximately 70.degree. C. in a chamber that may be heated to over 350.degree. C. during a typical processing operation. Preferably, a supplemental heater is mounted behind the upper shield and controlled by a temperature sensitive element which provides feedback control based on the temperature of the upper shield.

NUCLEAR REACTOR

DOEpatents

Miller, H.I.; Smith, R.C.

1958-01-21

This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

New approach to control the methanogenic reactor of a two-phase anaerobic digestion system.

PubMed

von Sachs, Jürgen; Meyer, Ulrich; Rys, Paul; Feitkenhauer, Heiko

2003-03-01

A new control strategy for the methanogenic reactor of a two-phase anaerobic digestion system has been developed and successfully tested on the laboratory scale. The control strategy serves the purpose to detect inhibitory effects and to achieve good conversion. The concept is based on the idea that volatile fatty acids (VFA) can be measured in the influent of the methanogenic reactor by means of titration. Thus, information on the output (methane production) and input of the methanogenic reactor is available, and a (carbon) mass balance can be obtained. The control algorithm comprises a proportional/integral structure with the ratio of (a) the methane production rate measured online and (b) a maximum methane production rate expected (derived from the stoichiometry) as a control variable. The manipulated variable is the volumetric feed rate. Results are shown for an experiment with VFA (feed) concentration ramps and for experiments with sodium chloride as inhibitor.

Electric field controlled emulsion phase contactor

DOEpatents

Scott, Timothy C.

1995-01-01

A system for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity.

Method of using an electric field controlled emulsion phase contactor

DOEpatents

Scott, Timothy C.

1993-01-01

A system for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity.

Electric field controlled emulsion phase contactor

DOEpatents

Scott, T.C.

1995-01-31

A system is described for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity. 5 figs.

Fluidics platform and method for sample preparation

DOEpatents

Benner, Henry W.; Dzenitis, John M.

2016-06-21

Provided herein are fluidics platforms and related methods for performing integrated sample collection and solid-phase extraction of a target component of the sample all in one tube. The fluidics platform comprises a pump, particles for solid-phase extraction and a particle-holding means. The method comprises contacting the sample with one or more reagents in a pump, coupling a particle-holding means to the pump and expelling the waste out of the pump while the particle-holding means retains the particles inside the pump. The fluidics platform and methods herein described allow solid-phase extraction without pipetting and centrifugation.

Post-traumatic stress disorder in the context of terrorism and other civil conflict in Northern Ireland: randomised controlled trial

PubMed Central

Gillespie, Kate; Clark, David M

2007-01-01

Objective To evaluate the effectiveness of cognitive therapy for post-traumatic stress disorder related to terrorism and other civil conflict in Northern Ireland. Design Randomised controlled trial. Setting Community treatment centre, Northern Ireland. Participants 58 consecutive patients with chronic post-traumatic stress disorder (median 5.2 years, range 3 months to 32 years) mostly resulting from multiple traumas linked to terrorism and other civil conflict. Interventions Immediate cognitive therapy compared with a waiting list control condition for 12 weeks followed by treatment. Treatment comprised a mean of 5.9 sessions during 12 weeks and 2.0 sessions thereafter. Main outcome measures Primary outcome measures were patients' scores for post-traumatic stress disorder (post-traumatic stress diagnostic scale) and depression (Beck depression inventory). The secondary outcome measure was scores for occupational and social functioning (work related disability, social disability, and family related disability) on the Sheehan disability scale. Results At 12 weeks after randomisation, immediate cognitive therapy was associated with significantly greater improvement than the waiting list control group in the symptoms of post-traumatic stress disorder (mean difference 9.6, 95% confidence interval 3.6 to 15.6), depression (mean difference 10.1, 4.8 to 15.3), and self reported occupational and social functioning (mean difference 1.3, 0.3 to 2.5). Effect sizes from before to after treatment were large: post-traumatic stress disorder 1.25, depression 1.05, and occupational and social functioning 1.17. No change was observed in the control group. Conclusion Cognitive therapy is an effective treatment for post-traumatic stress disorder related to terrorism and other civil conflict. Trial registration Current Controlled Trials ISRCTN16228473. PMID:17495988

Method and apparatus for in-system redundant array repair on integrated circuits

DOEpatents

Bright, Arthur A [Croton-on-Hudson, NY; Crumley, Paul G [Yorktown Heights, NY; Dombrowa, Marc B [Bronx, NY; Douskey, Steven M [Rochester, MN; Haring, Rudolf A [Cortlandt Manor, NY; Oakland, Steven F [Colchester, VT; Ouellette, Michael R [Westford, VT; Strissel, Scott A [Byron, MN

2008-07-29

Disclosed is a method of repairing an integrated circuit of the type comprising of a multitude of memory arrays and a fuse box holding control data for controlling redundancy logic of the arrays. The method comprises the steps of providing the integrated circuit with a control data selector for passing the control data from the fuse box to the memory arrays; providing a source of alternate control data, external of the integrated circuit; and connecting the source of alternate control data to the control data selector. The method comprises the further step of, at a given time, passing the alternate control data from the source thereof, through the control data selector and to the memory arrays to control the redundancy logic of the memory arrays.

Method and apparatus for in-system redundant array repair on integrated circuits

DOEpatents

Bright, Arthur A [Croton-on-Hudson, NY; Crumley, Paul G [Yorktown Heights, NY; Dombrowa, Marc B [Bronx, NY; Douskey, Steven M [Rochester, MN; Haring, Rudolf A [Cortlandt Manor, NY; Oakland, Steven F [Colchester, VT; Ouellette, Michael R [Westford, VT; Strissel, Scott A [Byron, MN

2008-07-08

Disclosed is a method of repairing an integrated circuit of the type comprising of a multitude of memory arrays and a fuse box holding control data for controlling redundancy logic of the arrays. The method comprises the steps of providing the integrated circuit with a control data selector for passing the control data from the fuse box to the memory arrays; providing a source of alternate control data, external of the integrated circuit; and connecting the source of alternate control data to the control data selector. The method comprises the further step of, at a given time, passing the alternate control data from the source thereof, through the control data selector and to the memory arrays to control the redundancy logic of the memory arrays.

Method and apparatus for in-system redundant array repair on integrated circuits

DOEpatents

Bright, Arthur A.; Crumley, Paul G.; Dombrowa, Marc B.; Douskey, Steven M.; Haring, Rudolf A.; Oakland, Steven F.; Ouellette, Michael R.; Strissel, Scott A.

2007-12-18

Disclosed is a method of repairing an integrated circuit of the type comprising of a multitude of memory arrays and a fuse box holding control data for controlling redundancy logic of the arrays. The method comprises the steps of providing the integrated circuit with a control data selector for passing the control data from the fuse box to the memory arrays; providing a source of alternate control data, external of the integrated circuit; and connecting the source of alternate control data to the control data selector. The method comprises the further step of, at a given time, passing the alternate control data from the source thereof, through the control data selector and to the memory arrays to control the redundancy logic of the memory arrays.

Valve for controlling solids flow

DOEpatents

Staiger, M.D.

1982-09-29

A valve for controlling the flow of solids comprises a vessel having an overflow point, an inlet line for discharging solids into the vessel positioned within the vessel such that the inlet line's discharge point is lower than the vessel's overflow point, and means for introducing a fluidizing fluid into the vessel. The fluidizing fluid fluidizes the solids within the vessel so that they overflow at the vessel's overflow point. For the removal of nuclear waste product the vessel may be placed within a sealed container having a bottom connected transport line for transporting the solids to storage or other sites. The rate of solids flow is controlled by the flow rate of the fluidizing fluid and by V-notch weirs of different sizes spaced about the top of the vessel.

Investigation of Space Interferometer Control Using Imaging Sensor Output Feedback

NASA Technical Reports Server (NTRS)

Leitner, Jesse A.; Cheng, Victor H. L.

2003-01-01

Numerous space interferometry missions are planned for the next decade to verify different enabling technologies towards very-long-baseline interferometry to achieve high-resolution imaging and high-precision measurements. These objectives will require coordinated formations of spacecraft separately carrying optical elements comprising the interferometer. High-precision sensing and control of the spacecraft and the interferometer-component payloads are necessary to deliver sub-wavelength accuracy to achieve the scientific objectives. For these missions, the primary scientific product of interferometer measurements may be the only source of data available at the precision required to maintain the spacecraft and interferometer-component formation. A concept is studied for detecting the interferometer's optical configuration errors based on information extracted from the interferometer sensor output. It enables precision control of the optical components, and, in cases of space interferometers requiring formation flight of spacecraft that comprise the elements of a distributed instrument, it enables the control of the formation-flying vehicles because independent navigation or ranging sensors cannot deliver the high-precision metrology over the entire required geometry. Since the concept can act on the quality of the interferometer output directly, it can detect errors outside the capability of traditional metrology instruments, and provide the means needed to augment the traditional instrumentation to enable enhanced performance. Specific analyses performed in this study include the application of signal-processing and image-processing techniques to solve the problems of interferometer aperture baseline control, interferometer pointing, and orientation of multiple interferometer aperture pairs.

User-friendly cognitive training for the elderly: a technical report.

PubMed

Boquete, Luciano; Rodríguez-Ascariz, José Manuel; Amo-Usanos, Carlos; Martínez-Arribas, Alejandro; Amo-Usanos, Javier; Otón, Salvador

2011-01-01

This article presents a system that implements a cognitive training program in users' homes. The system comprises various applications designed to create a daily brain-fitness regime. The proposed mental training system uses television and a remote control specially designed for the elderly. This system integrates Java applications to promote brain-fitness training in three areas: arithmetic, memory, and idea association. The system comprises the following: Standard television set, simplified wireless remote control, black box (system's core hardware and software), brain-fitness games (language Java), and Wi-Fi-enabled Internet-connected router. All data from the user training sessions are monitored through a control center. This control center analyzes the evolution of the user and the proper performance of the system during the test. The implemented system has been tested by six healthy volunteers. The results for this user group demonstrated the accessibility and usability of the system in a controlled real environment. The impressions of the users were very favorable, and they reported high adaptability to the system. The mean score for usability and accessibility assigned by the users was 3.56 out of 5 points. The operation stress test (over 200 h) was successful. The proposed system was used to implement a cognitive training program in users' homes, which was developed to be a low-cost tool with a high degree of user interactivity. The results of this preliminary study indicate that this user-friendly system could be adopted as a form of cognitive training for the elderly.

HIV and TB co-infection in Indian context.

PubMed

Mahyoub, E M; Garg, Suneela; Singh, M M; Agarwal, Paras; Gupta, V K; Gupta, Naresh

2013-01-01

This study was carried out in a Anti-Retroviral Therapy Clinic and TB center of a tertiary level hospital to find out socio-demographic correlates of HIV/TB individuals and risk factors of HIV/TB co-infection in Indian context. It is a case-control study comprising 420 subjects, 3 groups of 140 each. For a case group of HIV-TB co-infected subjects, two control groups, one comprising HIV patients (not having TB), and the other TB patients (not having HIV). Majority 267 (63.6%) males, 100 (71.4%) in case group (HIV/ TB), 74 (52.9%) in control group 1 (TB) and 93 (66.4%) in control group 2 (HIV). Mean (+/-SD) age of case-group was 34.91 (+/- 8.57) years. New TB cases were 213 (76.1%), more among control-group 1, compared to case-group. Multivariate analysis showed that risk of co-infection was 1.94 times higher among individuals aged >35 years. Difference statistically significant amongst those who were not on ART than who were on ART (p < 0.001). Those with CD4 counts <200 had 1.85 times risk of TB. Smokers had 1.92 times risk of TB. Co-infection higher in males, in age group 35-44 years, urban area, lower educational status and lower socioeconomic class. Current history of smoking significantly associated with co-infection. HIV status during TB infection was detected in 1/4th of study subjects. History of TB symptoms in family significantly associated with co-infection.

Histamine and epidermal growth factor in women with fibrocystic changes of the breast.

PubMed

Sieja, K; Stanosz, S; Glowińska, N

2003-04-01

In this study, the blood serum concentrations of histamine (HA) and epidermal growth factor (EGF) of women with fibrocystic changes (FCCs) of the breast were estimated. The control group comprised 32 women (mean age 44.9+/-4.4 years) without any pathologic changes in their breasts. The study group was made up of 81 women (mean age 44.5+/-3.5 years) with FCCs. The changes were divided into three subtypes: fibrous, cystic, and fibrocystic. In women with FCCs the concentrations of HA (P<0.01) and EGF (P<0.01) were significantly higher than in women without any changes in their breasts (control group). The concentration of EGF in blood serum was significantly higher in women with the fibrocystic subtype of FCC (P<0.001) than in healthy women. No correlations between the blood serum concentrations of HA and of EGF were found in either the control group or the study group. The significantly higher blood serum concentrations of HA and EGF women with FCCs than in healthy women suggest that HA and EGF have a role in the development of this disease.

Power transmission device for four wheel drive vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iwatsuki, T.; Kawamoto, M.; Kano, T.

This patent describes a power transmission device with an improved differential motion limiting mechanism for a four wheel drive vehicle having automatic transmission means, front wheel differential gear means, differential motion limiting means and transfer unit means including center differential gear means, comprising: a first gear mount casing having a gear adapted to mesh with an output of a transmission; a differential motion limiting device arranged together with a front wheel differential gear in the first gear mount casing. The front wheel differential gear having a first diff-carrier and the differential motion limiting device comprising a hydraulic friction clutch formore » engaging and disengaging the first gear mount casing with the first diff-carrier of the front wheel differential gear; a second gear mount casing disposed coaxially with respect to the first gear mount casing; and a transfer unit including a center differential gear arranged in the second gear mount casing, the center differential gear comprising a second diff-carrier coupled with the first gear mount casing, a first side gear coupled with the first diff-carrier of the front wheel differential gear, and a second side gear coupled with the second gear mount casing for transmitting power to the rear wheels.« less

Boiler using combustible fluid

DOEpatents

Baumgartner, H.; Meier, J.G.

1974-07-03

A fluid fuel boiler is described comprising a combustion chamber, a cover on the combustion chamber having an opening for introducing a combustion-supporting gaseous fluid through said openings, means to impart rotation to the gaseous fluid about an axis of the combustion chamber, a burner for introducing a fluid fuel into the chamber mixed with the gaseous fluid for combustion thereof, the cover having a generally frustro-conical configuration diverging from the opening toward the interior of the chamber at an angle of between 15/sup 0/ and 55/sup 0/; means defining said combustion chamber having means defining a plurality of axial hot gas flow paths from a downstream portion of the combustion chamber to flow hot gases into an upstream portion of the combustion chamber, and means for diverting some of the hot gas flow along paths in a direction circumferentially of the combustion chamber, with the latter paths being immersed in the water flow path thereby to improve heat transfer and terminating in a gas outlet, the combustion chamber comprising at least one modular element, joined axially to the frustro-conical cover and coaxial therewith. The modular element comprises an inner ring and means of defining the circumferential, radial, and spiral flow paths of the hot gases.

Long-term effects of good handling practices during the pre-weaning period of crossbred dairy heifer calves.

PubMed

Silva, Luciana Pontes; Sant'Anna, Aline Cristina; Silva, Lívia Carolina Magalhães; Paranhos da Costa, Mateus José Rodrigues

2017-01-01

The aim of this study was to determine whether applying good practices of handling during the pre-weaning period have long-term effects on behavioral and physiological indicators, health status, and average daily gain (ADG) of crossbred Bos taurus × Bos indicus heifer calves. During the pre-weaning period, 98 crossbred of Holstein × Gir heifer calves were allotted into three treatments: (1) good practices of handling + brushing (GPB; n = 25), (2) good practices of handling (GP; n = 25), and (3) control (n = 48). Every 2 months, four evaluation periods (EV 1 to EV 4 ) were conducted to record data. Behavioral indicators comprised time to drive (TD), flight speed (FS), flight distance (FD), and composite reactivity score (CRS). Physiological indicators of acute stress during handling comprised respiratory and heart rates. Health status comprised data regarding occurrence of most common diseases (i.e., pneumonia and anaplasmosis). Collected data were analyzed by using a linear mixed model for repeated measures, Tukey's test, and chi-squared procedures. Treatment influenced (P < 0.05) TD, FS, and FD but not CRS (P = 0.78). From EV 1 to EV 3 , the control calves had the lowest TD. The GPB group had lower FS than the control but did not differ from GP. The GPB group had lower FD means than the other two groups in EV 2 , EV 3 , and EV 4 . No differences (P > 0.05) due to treatment were observed on heart and respiratory rates, ADG, or occurrence of pneumonia and anaplasmosis. It was concluded that adoption of good practices of handling during pre-weaning period may lead to long-term positive effects.

Effect of D-ribose-L-cysteine on aluminum induced testicular damage in male Sprague-Dawley rats.

PubMed

Falana, Benedict; Adeleke, Opeyemi; Orenolu, Mulikat; Osinubi, Abraham; Oyewopo, Adeoye

2017-06-01

This study investigated the effects of D-ribose and L-cysteine on aluminum-induced testicular damage in male Sprague-Dawley rats. A total number of thirty-five (35) adult male Sprague-Dawley rats were divided into four groups (AD). Group A (comprised five (5) rats) was designated the Control Group that received Physiological Saline; while groups B, C, and D (comprised ten (10) rats) were given 75 mg/kg, 150 mg/kg and 300 mg/kg of body weight of aluminum chloride respectively for 39 days. At day 40, the aluminum-treated groups were subdivided into sub-groups (B1, C1, D1) comprising of five (5) rats each, and 30 mg/kg body weight of Riboceine were administered for twenty (20) days. Groups B, C and D remained on the normal dosage of aluminum chloride for three more weeks (59 days). Andrological parameters (Sperm count, motility, morphology and testosterone) in the aluminum-treated Groups B and C showed no significant difference in their mean values when compared with their control counterparts, whereas there was a significant reduction in the andrological parameters in Group D rats when compared with the Control animals. Histoarchitecture of the testes "stain with H&E" of Group A, B and C rats appeared normal while Group D rats showed testicular damages with several abnormal seminiferous tubules with incomplete maturation of germinal cell layers and absence of spermatozoa in their lumen; Leydig cells appear hyperplastic. Group B1, C1 and D1 andrological and histological parameters appeared normal. Riboceine treatment significantly attenuates aluminum-induced testicular toxicity in male Sprague-Dawley in rats.

French Modular Impoundment: Final Cost and Performance Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drown, Peter; French, Bill

This report comprises the Final Cost and Performance Report for the Department of Energy Award # EE0007244, the French Modular Impoundment (aka the “French Dam”.) The French Dam is a system of applying precast modular construction to water control structures. The “French Dam” is a term used to cover the construction means/methods used to construct or rehabilitate dams, diversion structures, powerhouses, and other hydraulic structures which impound water and are covered under FDE’s existing IP (Patents # US8414223B2; US9103084B2.)

Linking water quality guidelines to the natural characteristics of catchments in order to support distinct aquatic ecosystems: Water quality guidelines for suspended particulate matter

NASA Astrophysics Data System (ADS)

Bilotta, G. S.; Grove, M. K.; Harrison, C.; Joyce, C. B.; Peacock, C.

2012-12-01

The natural characteristics of a catchment provide a template that controls the background rates of geomorphological processes operating within that catchment, which in-turn determines the background physico-chemical and hydro-morphological characteristics of the catchment's surface waters. Large differences in the natural characteristics of catchments (e.g. geology, topography, climate), lead to unique physico-chemical and hydro-morphological conditions that support unique freshwater communities. However, this uniqueness is not always recognised in international water quality guidelines, which often attempt to apply blanket water-quality guidelines to 'protect' a wide range of ecosystems. In this paper we investigate the natural characteristics that control background concentrations of suspended particulate matter (SPM - including nano-scale particles to sand-sized sediments), which is a well-known cause of ecological degradation. At present, the management of SPM is hampered by a lack of understanding of the SPM conditions that water quality managers should aim to achieve in contrasting environments in order to support good ecological status. To address this, in this paper we examine the SPM preferences of contrasting biological communities that are in reference condition (minimal anthropogenic disturbance and high ecological status). We analyse historical SPM data collected on a monthly basis from a wide range of reference-condition temperate environments (638 stream/river sites comprising 42 different biological community-types). This analysis reveals that there are statistically significant differences (One-way ANOVA p < 0.001) between the background SPM concentrations observed in contrasting communities that are in reference condition. Mean background SPM concentrations for contrasting communities ranged from 1.7 to 26.2 mg L-1 (i.e. more than a 15-fold difference). We propose a model for predicting environment-specific water quality guidelines for SPM. In order to develop this model, the 638 reference-condition sites were first classified into one of five mean background SPM ranges (0.00-5.99, 6.00-11.99, 12.00-17.99, 18.00-23.99 and >24.00 mg L-1). Stepwise Multiple Discriminant Analysis (MDA) of these ranges showed that a site's SPM range can be predicted as a function of: mean annual air temperature, mean annual precipitation, mean altitude of upstream catchment, distance from source, slope to source, channel width and depth, the percentage of catchment area comprised of clay, chalk, and hard rock solid geology, and the percentage of the catchment area comprised of blown sand/landslide material as the surface (drift) material. Although the model is still being improved and developed, this research highlights the need to link water quality guidelines to the natural characteristics of catchments and the physico-chemical preferences of the biological communities that would naturally inhabit them.

Snowmelt hydrograph interpretation: Revealing watershed scale hydrologic characteristics of the Yellowstone volcanic plateau

USGS Publications Warehouse

Payton, Gardner W.; Susong, D.D.; Kip, Solomon D.; Heasler, H.

2010-01-01

Snowmelt hydrograph analysis and groundwater age dates of cool water springs on the Yellowstone volcanic plateau provide evidence of high volumes of groundwater circulation in watersheds comprised of quaternary Yellowstone volcanics. Ratios of maximum to minimum mean daily discharge and average recession indices are calculated for watersheds within and surrounding the Yellowstone volcanic plateau. A model for snowmelt recession is used to separate groundwater discharge from overland runoff, and compare groundwater systems. Hydrograph signal interpretation is corroborated with chlorofluorocarbon (CFC) and tritium concentrations in cool water springs on the Yellowstone volcanic plateau. Hydrograph parameters show a spatial pattern correlated with watershed geology. Watersheds comprised dominantly of quaternary Yellowstone volcanics are characterized by slow streamflow recession, low maximum to minimum flow ratios. Cool springs sampled within the Park contain CFC's and tritium and have apparent CFC age dates that range from about 50 years to modern. Watersheds comprised of quaternary Yellowstone volcanics have a large volume of active groundwater circulation. A large, advecting groundwater field would be the dominant mechanism for mass and energy transport in the shallow crust of the Yellowstone volcanic plateau, and thus control the Yellowstone hydrothermal system. ?? 2009 Elsevier B.V.

Three-dimensional evaluation of upper airway following rapid maxillary expansion: a CBCT study.

PubMed

El, Hakan; Palomo, Juan Martin

2014-03-01

To evaluate, by using cone beam computed tomography, the skeletal, dental, oropharyngeal (OP) airway volume, and nasal passage (NP) volume changes that occur after rapid maxillary expansion (RME). Two groups were selected, each with 35 patients (15 males, 20 females), an RME group (mean age, 14.02 ± 1.46 years) and a control group (mean age, 14.10 ± 1.44 years). The RME group consisted of patients with maxillary constriction who were treated with Hyrax palatal expanders, and the control group comprised age- and sex-matched patients who underwent comprehensive orthodontic treatment without the use of a rapid maxillary expander. All of the transverse skeletal (medial orbital width, lateral nasal width, maxillary width, and mandibular width) and interdental (intermolar, interpremolar, and intercanine) parameters were significantly enlarged in the RME group. A statistically significant increase in airway variables was seen in both groups between pretreatment (T0) and final records (T1). The mean increase of NP airway volume for the RME group (1719.9 ± 1510.7 mm(3)) was twofold compared with the control group (813.6 ± 1006.7 mm(3)), and no intergroup significant difference was found for the OP volume. Rapid maxillary expansion creates a significant increase in nasal passage airway volume but no significant change in the oropharyngeal airway volume.

Stable isotope and chemical compositions of European and Australasian ciders as a guide to authenticity.

PubMed

Carter, James F; Yates, Hans S A; Tinggi, Ujang

2015-01-28

This paper presents a data set derived from the analysis of bottled and canned ciders that may be used for comparison with suspected counterfeit or substitute products. Isotopic analysis of the solid residues from ciders (predominantly sugar) provided a means to determine the addition of C4 plant sugars. The added sugars were found to comprise cane sugar, high-fructose corn syrup, glucose, or combinations. The majority of ciders from Australia and New Zealand were found to contain significant amounts of added sugar, which provided a limited means to distinguish these ciders from European ciders. The hydrogen and oxygen isotopic compositions of the whole ciders (predominantly water) were shown to be controlled by two factors, the water available to the parent plant and evaporation. Analysis of data derived from both isotopic and chemical analysis of ciders provided a means to discriminate between regions and countries of manufacture.

Controlled sound field with a dual layer loudspeaker array

NASA Astrophysics Data System (ADS)

Shin, Mincheol; Fazi, Filippo M.; Nelson, Philip A.; Hirono, Fabio C.

2014-08-01

Controlled sound interference has been extensively investigated using a prototype dual layer loudspeaker array comprised of 16 loudspeakers. Results are presented for measures of array performance such as input signal power, directivity of sound radiation and accuracy of sound reproduction resulting from the application of conventional control methods such as minimization of error in mean squared pressure, maximization of energy difference and minimization of weighted pressure error and energy. Procedures for selecting the tuning parameters have also been introduced. With these conventional concepts aimed at the production of acoustically bright and dark zones, all the control methods used require a trade-off between radiation directivity and reproduction accuracy in the bright zone. An alternative solution is proposed which can achieve better performance based on the measures presented simultaneously by inserting a low priority zone named as the “gray” zone. This involves the weighted minimization of mean-squared errors in both bright and dark zones together with the gray zone in which the minimization error is given less importance. This results in the production of directional bright zone in which the accuracy of sound reproduction is maintained with less required input power. The results of simulations and experiments are shown to be in excellent agreement.

Position sensor for a fuel injection element in an internal combustion engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulkerson, D.E.; Geske, M.L.

1987-08-18

This patent describes an electronic circuit for dynamically sensing and processing signals representative of changes in a magnet field, the circuit comprising: means for sensing a change in a magnetic field external to the circuit and providing an output representative of the change; circuit means electronically coupled with the output of the sensing means for providing an output indicating the presence of the magnetic field change; and a nulling circuit coupled with the output of the sensing means and across the indicating circuit means for nulling the electronic circuit responsive to the sensing means output, to thereby avoid ambient magneticmore » fields temperature and process variations, and wherein the nulling circuit comprises a capacitor coupled to the output of the nulling circuit, means for charging and discharging the capacitor responsive to any imbalance in the input to the nulling circuit, and circuit means coupling the capacitor with the output of the sensing means for nulling any imbalance during the charging or discharging of the capacitor.« less

Evaluation of Nosocomial Infection Control Programs in health services 1

PubMed Central

Menegueti, Mayra Gonçalves; Canini, Silvia Rita Marin da Silva; Bellissimo-Rodrigues, Fernando; Laus, Ana Maria

2015-01-01

OBJECTIVES: to evaluate the Nosocomial Infection Control Programs in hospital institutions regarding structure and process indicators. METHOD: this is a descriptive, exploratory and quantitative study conducted in 2013. The study population comprised 13 Nosocomial Infection Control Programs of health services in a Brazilian city of the state of São Paulo. Public domain instruments available in the Manual of Evaluation Indicators of Nosocomial Infection Control Practices were used. RESULTS: The indicators with the highest average compliance were "Evaluation of the Structure of the Nosocomial Infection Control Programs" (75%) and "Evaluation of the Epidemiological Surveillance System of Nosocomial Infection" (82%) and those with the lowest mean compliance scores were "Evaluation of Operational Guidelines" (58.97%) and "Evaluation of Activities of Control and Prevention of Nosocomial Infection" (60.29%). CONCLUSION: The use of indicators identified that, despite having produced knowledge about prevention and control of nosocomial infections, there is still a large gap between the practice and the recommendations. PMID:25806637

Production of MHD fluid

DOEpatents

Lacey, James J.; Kurtzrock, Roy C.; Bienstock, Daniel

1976-08-24

A hot gaseous fluid of low ash content, suitable for use in open-cycle MHD (magnetohydrodynamic) power generation, is produced by means of a three-stage process comprising (1) partial combustion of a fossil fuel to produce a hot gaseous product comprising CO.sub.2 CO, and H.sub.2 O, (2) reformation of the gaseous product from stage (1) by means of a fluidized char bed, whereby CO.sub.2 and H.sub.2 O are converted to CO and H.sub.2, and (3) combustion of CO and H.sub.2 from stage (2) to produce a low ash-content fluid (flue gas) comprising CO.sub.2 and H.sub.2 O and having a temperature of about 4000.degree. to 5000.degree.F.

Separator for electrochemical cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffin, R.A.

1988-12-27

An electrochemical cell is described comprising a sealed casing; an anode, a cathode, a separator positioned between the anode and the cathode, and a non-aqueous electrolyte sealed in the casing; a pair of electrical terminals on the casing; means for electrically isolating the electrical terminals from each other; and means for electrically connecting the anode to one terminal and the cathode to the other terminal; wherein the anode is comprised of lithium foil, the cathode is comprised of manganese dioxide, and the separator consists essentially of a microporous polypropylene film having a thickness of about 1.5 mils and internal voidsmore » of about 60% by volume; wherein the anode, cathode, and separator are spirally wound together in a jelly roll configuration.« less

Loss of corticospinal tract integrity in early MS disease stages

PubMed Central

Neumann, Jens; Kaufmann, Jörn; Heidel, Jan; Stadler, Erhard; Sweeney-Reed, Catherine; Sailer, Michael; Schreiber, Stefanie

2017-01-01

Objective: We investigated corticospinal tract (CST) integrity in the absence of white matter (WM) lesions using diffusion tensor imaging (DTI) in early MS disease stages. Methods: Our study comprised 19 patients with clinically isolated syndrome (CIS), 11 patients with relapsing-remitting MS (RRMS), and 32 age- and sex-matched healthy controls, for whom MRI measures of CST integrity (fractional anisotropy [FA], mean diffusivity [MD]), T1- and T2-based lesion load, and brain volumes were available. The mean (SD) disease duration was 3.5 (2.1) months, and disability score was low (median Expanded Disability Status Scale 1.5) at the time of the study. Results: Patients with CIS and RRMS had significantly lower CST FA and higher CST MD values compared with controls. These findings were present, irrespective of whether WM lesions affected the CST. However, no group differences in the overall gray or WM volume were identified. Conclusions: In early MS disease stages, CST integrity is already affected in the absence of WM lesions or brain atrophy. PMID:28959706

Scanning Mechanism of the FY-3 Microwave Humidity Sounder

NASA Technical Reports Server (NTRS)

Schmid, Manfred; Jing, Li; Hehr, Christian

2010-01-01

Astrium GmbH Germany, developed the scanning equipment for the instrument package of the MicroWave Humidity Sounder (MWHS) flying on the FY-3 meteorological satellite (FY means Feng Yun, Wind and Cloud) in a sun-synchronized orbit of 850-km altitude and at an inclination of 98.8 . The scanning mechanism rotates at variable velocity comprising several acceleration / deceleration phases during each revolution. The Scanning Mechanism contains two output shafts, each rotating a parabolic offset Antenna Reflector. The mechanism is operated in closed loop by means of redundant control electronics. MWHS is a sounding radiometer for measurement of global atmospheric water vapour profiles. An Engineering Qualification Model was developed and qualified and a first Flight Model was launched early 2008. The system is now working for more than two years successful in orbit. A second Flight Model of the Antenna Scanning Mechanism and of its associated control electronics was built and delivered to the customer for application on the follow-on spacecraft that will be launched by the end of 2010.

Reprogrammable read only variable threshold transistor memory with isolated addressing buffer

DOEpatents

Lodi, Robert J.

1976-01-01

A monolithic integrated circuit, fully decoded memory comprises a rectangular array of variable threshold field effect transistors organized into a plurality of multi-bit words. Binary address inputs to the memory are decoded by a field effect transistor decoder into a plurality of word selection lines each of which activates an address buffer circuit. Each address buffer circuit, in turn, drives a word line of the memory array. In accordance with the word line selected by the decoder the activated buffer circuit directs reading or writing voltages to the transistors comprising the memory words. All of the buffer circuits additionally are connected to a common terminal for clearing all of the memory transistors to a predetermined state by the application to the common terminal of a large magnitude voltage of a predetermined polarity. The address decoder, the buffer and the memory array, as well as control and input/output control and buffer field effect transistor circuits, are fabricated on a common substrate with means provided to isolate the substrate of the address buffer transistors from the remainder of the substrate so that the bulk clearing function of simultaneously placing all of the memory transistors into a predetermined state can be performed.

Laser-Based Acousto-Optic Uplink Communications Technique

DTIC Science & Technology

2003-08-18

An apparatus for enabling acousto - optic communication comprising an in-water platform comprising means for emitting an acoustic signal to an acousto ...portion of the first interrogation beam and a second laser beam formed from the reflection of the first interrogation beam off of the acousto - optic interaction... optic interaction zone, an in-air platform comprising the ability for transmitting a first optical interrogation beam, the ability for receiving a

Fluidizing a mixture of particulate coal and char

DOEpatents

Green, Norman W.

1979-08-07

Method of mixing particulate materials comprising contacting a primary source and a secondary source thereof whereby resulting mixture ensues; preferably at least one of the two sources has enough motion to insure good mixing and the particulate materials may be heat treated if desired. Apparatus for such mixing comprising an inlet for a primary source, a reactor communicating therewith, a feeding means for supplying a secondary source to the reactor, and an inlet for the secondary source. Feeding means is preferably adapted to supply fluidized materials.

Mixing method and apparatus

DOEpatents

Green, Norman W.

1982-06-15

Method of mixing particulate materials comprising contacting a primary source and a secondary source thereof whereby resulting mixture ensues; preferably at least one of the two sources has enough motion to insure good mixing and the particulate materials may be heat treated if desired. Apparatus for such mixing comprising an inlet for a primary source, a reactor communicating therewith, a feeding means for supplying a secondary source to the reactor, and an inlet for the secondary source. Feeding means is preferably adapted to supply fluidized materials.

Container for reprocessing and permanent storage of spent nuclear fuel assemblies

DOEpatents

Forsberg, Charles W.

1992-01-01

A single canister process container for reprocessing and permanent storage of spent nuclear fuel assemblies comprising zirconium-based cladding and fuel, which process container comprises a collapsible container, having side walls that are made of a high temperature alloy and an array of collapsible support means wherein the container is capable of withstanding temperature necessary to oxidize the zirconium-based cladding and having sufficient ductility to maintain integrity when collapsed under pressure. The support means is also capable of maintaining their integrity at temperature necessary to oxide the zirconium-based cladding. The process container also has means to introduce and remove fluids to and from the container.

Development of an Intelligent Monitoring and Control System for a Heterogeneous Numerical Propulsion System Simulation

NASA Technical Reports Server (NTRS)

Reed, John A.; Afjeh, Abdollah A.; Lewandowski, Henry; Homer, Patrick T.; Schlichting, Richard D.

1996-01-01

The NASA Numerical Propulsion System Simulation (NPSS) project is exploring the use of computer simulation to facilitate the design of new jet engines. Several key issues raised in this research are being examined in an NPSS-related research project: zooming, monitoring and control, and support for heterogeneity. The design of a simulation executive that addresses each of these issues is described. In this work, the strategy of zooming, which allows codes that model at different levels of fidelity to be integrated within a single simulation, is applied to the fan component of a turbofan propulsion system. A prototype monitoring and control system has been designed for this simulation to support experimentation with expert system techniques for active control of the simulation. An interconnection system provides a transparent means of connecting the heterogeneous systems that comprise the prototype.

Condition sensor system and method

NASA Technical Reports Server (NTRS)

Polhemus, J. T.; Morgan, J. E.; Mandell, A. (Inventor)

1978-01-01

The condition sensor system comprises a condition detector which produces a pulse when a parameter of the monitored condition exceeds a desired threshold. A resettable condition counter counts each pulse. A resettable timer is preset to produce a particular time frame. The counter produces a condition signal when the accumulated number of pulses within the time frame is equal to or greater than a preset count. Control means responsive to the incoming pulses and to the condition signal produce control signals that control utilization devices. After a suitable delay, the last detected pulse simultaneously resets the pulse counter and the timer, and prepares them for sensing another condition occurrence within the time frame. The invention has particular utility in the process of detecting rocking motions of blind people. A controlled, audible, bio-feedback signal is provided which constitutes a warning to the blind person that he is rocking.

The impact of primary open-angle glaucoma: Quality of life in Indian patients.

PubMed

Kumar, Suresh; Ichhpujani, Parul; Singh, Roopali; Thakur, Sahil; Sharma, Madhu; Nagpal, Nimisha

2018-03-01

Glaucoma significantly affects the quality of life (QoL) of a patient. Despite the huge number of glaucoma patients in India, not many, QoL studies have been carried out. The purpose of the present study was to evaluate the QoL in Indian patients with varying severity of glaucoma. This was a hospital-based, cross-sectional, analytical study of 180 patients. The QoL was assessed using orally administered QoL instruments comprising of two glaucoma-specific instruments; Glaucoma Quality of Life-15 (GQL-15) and Viswanathan 10 instrument, and 1 vision-specific instrument; National Eye Institute Visual Function Questionnaire-25 (NEIVFQ25). Using NEIVFQ25, the difference between mean QoL scores among cases (88.34 ± 4.53) and controls (95.32 ± 5.76) was statistically significant. In GQL-15, there was a statistically significant difference between mean scores of cases (22.58 ± 5.23) and controls (16.52 ± 1.24). The difference in mean scores with Viswanathan 10 instrument in cases (7.92 ± 0.54) and controls (9.475 ± 0.505) was also statistically significant. QoL scores also showed moderate correlation with mean deviation, pattern standard deviation, and vertical cup-disc ratio. In our study, all the three instruments showed decrease in QoL in glaucoma patients compared to controls. With the increase in severity of glaucoma, corresponding decrease in QoL was observed. It is important for ophthalmologists to understand about the QoL in glaucoma patients so as to have a more holistic approach to patients and for effective delivery of treatment.

An Adaptive Supervisory Sliding Fuzzy Cerebellar Model Articulation Controller for Sensorless Vector-Controlled Induction Motor Drive Systems

PubMed Central

Wang, Shun-Yuan; Tseng, Chwan-Lu; Lin, Shou-Chuang; Chiu, Chun-Jung; Chou, Jen-Hsiang

2015-01-01

This paper presents the implementation of an adaptive supervisory sliding fuzzy cerebellar model articulation controller (FCMAC) in the speed sensorless vector control of an induction motor (IM) drive system. The proposed adaptive supervisory sliding FCMAC comprised a supervisory controller, integral sliding surface, and an adaptive FCMAC. The integral sliding surface was employed to eliminate steady-state errors and enhance the responsiveness of the system. The adaptive FCMAC incorporated an FCMAC with a compensating controller to perform a desired control action. The proposed controller was derived using the Lyapunov approach, which guarantees learning-error convergence. The implementation of three intelligent control schemes—the adaptive supervisory sliding FCMAC, adaptive sliding FCMAC, and adaptive sliding CMAC—were experimentally investigated under various conditions in a realistic sensorless vector-controlled IM drive system. The root mean square error (RMSE) was used as a performance index to evaluate the experimental results of each control scheme. The analysis results indicated that the proposed adaptive supervisory sliding FCMAC substantially improved the system performance compared with the other control schemes. PMID:25815450

An adaptive supervisory sliding fuzzy cerebellar model articulation controller for sensorless vector-controlled induction motor drive systems.

PubMed

Wang, Shun-Yuan; Tseng, Chwan-Lu; Lin, Shou-Chuang; Chiu, Chun-Jung; Chou, Jen-Hsiang

2015-03-25

This paper presents the implementation of an adaptive supervisory sliding fuzzy cerebellar model articulation controller (FCMAC) in the speed sensorless vector control of an induction motor (IM) drive system. The proposed adaptive supervisory sliding FCMAC comprised a supervisory controller, integral sliding surface, and an adaptive FCMAC. The integral sliding surface was employed to eliminate steady-state errors and enhance the responsiveness of the system. The adaptive FCMAC incorporated an FCMAC with a compensating controller to perform a desired control action. The proposed controller was derived using the Lyapunov approach, which guarantees learning-error convergence. The implementation of three intelligent control schemes--the adaptive supervisory sliding FCMAC, adaptive sliding FCMAC, and adaptive sliding CMAC--were experimentally investigated under various conditions in a realistic sensorless vector-controlled IM drive system. The root mean square error (RMSE) was used as a performance index to evaluate the experimental results of each control scheme. The analysis results indicated that the proposed adaptive supervisory sliding FCMAC substantially improved the system performance compared with the other control schemes.

System for measuring radioactivity of labelled biopolymers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gross, V.

1980-07-08

A system is described for measuring radioactivity of labelled biopolymers, comprising: a set of containers adapted for receiving aqueous solutions of biological samples containing biopolymers which are subsequently precipitated in said containers on particles of diatomite in the presence of a coprecipitator, then filtered, dissolved, and mixed with a scintillator; radioactivity measuring means including a detection chamber to which is fed the mixture produced in said set of containers; an electric drive for moving said set of containers in a stepwise manner; means for proportional feeding of said coprecipitator and a suspension of diatomite in an acid solution to saidmore » containers which contain the biological sample for forming an acid precipitation of biopolymers; means for the removal of precipitated samples from said containers; precipitated biopolymer filtering means for successively filtering the precipitate, suspending the precipitate, dissolving the biopolymers mixed with said scintillator for feeding of the mixture to said detection chamber; a system of pipelines interconnecting said above-recited means; and said means for measuring radioactivity of labelled biopolymers including, a measuring cell arranged in a detection chamber and communicating with said means for filtering precipitated biopolymers through one pipeline of said system of pipelines; a program unit electrically connected to said electric drive, said means for acid precipatation of biopolymers, said means for the removal of precipitated samples from said containers, said filtering means, and said radioactivity measuring device; said program unit adapted to periodically switch on and off the above-recited means and check the sequence of the radioactivity measuring operations; and a control unit for controlling the initiation of the system and for selecting programs.« less

Dental caries experience and periodontal treatment needs of children with autistic spectrum disorder.

PubMed

Fakroon, S; Arheiam, A; Omar, S

2015-04-01

To assess dental caries experience and periodontal treatment needs among Libyan children diagnosed with autistic spectrum disorder (ASD). A cross-sectional, comparative case-control study was used, in which dental caries experience of 50 children with ASD was compared with that of 50 controls. The children with ASD were recruited from Benghazi Centre of Children with ASD, Libya. Controls were recruited from school children and matched for age, gender and socioeconomic status. DMFT, dmft for dental caries experience and CPITN for periodontal treatment needs were calculated according to WHO criteria by a calibrated examiner. Scores for DMFT as well as CPITN indices were compared using bivariate analysis. The data analysed for this study comprised observations from a group of children (cases = 50) diagnosed with ASD matched with healthy children (controls = 50). Consequently, each group consisted of 40 males and 10 females aged between 3 and 14 years (mean 7.29 ± 3.11). The ASD children showed significantly lower means for DMFT and dmft teeth as well as higher periodontal treatment needs (p > 0.05). Children with ASD were found to be more likely caries-free and have lower DMFT scores and higher unmet periodontal treatment needs than did the unaffected control children.

Flow-mediated dilation in athletes: influence of aging.

PubMed

Montero, David; Padilla, Jaume; Diaz-Cañestro, Candela; Muris, Dennis M J; Pyke, Kyra E; Obert, Philippe; Walther, Guillaume

2014-11-01

Controversy exists on whether endothelial function is enhanced in athletes. We sought to systematically review the literature and determine whether endothelial function, as assessed by flow-mediated dilation (FMD), is greater in athletes across all ages relative to that in their age-matched counterparts. We conducted a systematic search on MEDLINE, Cochrane, Scopus, and Web of Science since their inceptions until July 2013 for articles evaluating FMD in athletes. A meta-analysis was performed to compare the standardized mean difference (SMD) in FMD of the brachial artery between athletes and age-matched control subjects. Subgroup analyses and meta-regression were used to identify sources of heterogeneity. Twenty-one articles were included in this analysis, comprising 530 athletes (452 endurance trained, 49 strength trained, and 29 endurance and strength trained) and 376 control subjects. After data pooling, FMD was higher in athletes than that in control groups (SMD, 0.48; P = 0.008). In subgroup analyses, young athletes (<40 yr) presented increased baseline brachial artery diameter (mean difference, 0.40 mm; P < 0.00001) and similar FMD (SMD, 0.27; P = 0.22) compared with those in controls. In contrast, master athletes (>;50 yr) showed similar baseline brachial artery diameter (mean difference, 0.04 mm; P = 0.69) and increased FMD (SMD, 0.99; P = 0.0005) compared with those in controls. The current meta-analysis provides evidence that master athletes but not young athletes exhibit greater FMD compared with that in age-matched healthy controls, thus suggesting that the association between high levels of exercise training and increased FMD is age dependent.

The effectiveness of assertiveness training for school-aged children on bullying and assertiveness level.

PubMed

Avşar, Fatma; Ayaz Alkaya, Sultan

The aim of this study was to determine the effectiveness of an assertive training for school-aged children on peer bullying and assertiveness. A quasi-experimental design using pre- and post-testing was conducted. Data were collected using a demographic questionnaire, an assertiveness scale, and the peer victimization scale. The training program was comprised of eight sessions which were implemented to intervention group. Descriptive characteristics were not statistically different between the groups (p>0.05). The peer victimization victim dimension results show that post-test mean scores of the students in the intervention group were lower than the pre-test mean scores (p<0.05). For the control group, no significant change was found in the pre-test and post-test mean scores (p>0.05). A comparison of the mean pre-test/post-test scores of peer-victimization bully dimension of the students' intervention and control groups revealed that the mean post-test scores of the students in the each group decreased (p>0.05). An assertiveness training program increased the assertiveness level and reduced the state of being victims, but did not affect the state of being bullies. The results of this study can help children acquire assertive behaviors instead of negative behaviors such as aggression and shyness, and help them to build effective social communication. Copyright © 2017 Elsevier Inc. All rights reserved.

Disordered eating behaviour in young adults with type 1 diabetes mellitus.

PubMed

Keane, S; Clarke, M; Murphy, M; McGrath, D; Smith, D; Farrelly, N; MacHale, S

2018-01-01

The combination of eating disorders and diabetes is associated with increased risk of morbidity and mortality. The aim of this study is to compare the prevalence of disordered eating behaviour (DEB) in young adults with type 1 diabetes mellitus to a sample of non-diabetic controls, and to examine the relationship of DEB to glycaemic control. The Eating Disorder Examination Questionnaire (EDE-Q) was administered to 51 individuals aged 18-30 years attending an outpatient diabetic clinic in a large university teaching hospital. Glycaemic control was assessed by the glycosylated haemoglobin (HbA1c). The control group comprised a consecutive sample of 236 male and female students aged 18-30 years attending a university primary health care service. The mean global EDE-Q score for the diabetes group was 0.82 ± 1.1 (mean ± SD) and the mean for the control group was 1.4 ± 1.3 (mean ± SD). The diabetes group was significantly more likely to have a lower global EDE-Q score compared to the control group. There was no association between the global EDE-Q score of the diabetes group and HbA1c level. We did not find increased levels of disordered eating behavior (DEB) in young adults with type 1 diabetes mellitus compared to a non-diabetic control sample.

Semiconductor laser having a non-absorbing passive region with beam guiding

NASA Technical Reports Server (NTRS)

Botez, Dan (Inventor)

1986-01-01

A laser comprises a semiconductor body having a pair of end faces and including an active region comprising adjacent active and guide layers which is spaced a distance from the end face and a passive region comprising adjacent non-absorbing guide and mode control layers which extends between the active region and the end face. The combination of the guide and mode control layers provides a weak positive index waveguide in the lateral direction thereby providing lateral mode control in the passive region between the active region and the end face.

Superconductor magnetic reading and writing heads

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnes, F.S.; Dugas, M.P.

1990-11-20

This paper describes a head for interfacing with a magnetic recording media. It comprises: a member of magnetic material forming at least a portion of a magnetic flux circuit ending with a pole face surface in interfacing relation to the media for establishing a main pole in proximity to the media in the magnetic flux circuit, magnetically responsive means in magnetically coupled relation to the magnetic flux circuit, means encasing at least a portion of the external surfaces of the member with superconductive material except for the media interfacing portion of the pole face surface. The encasing means including superconductingmore » material substantially surrounding the magnetic flux circuit in proximity to the pole face surface, and means establishing an environment for the superconductive material at a temperature for maintaining the superconductive material in its superconductive state, whereby magnetic flux in the magnetic flux circuit associated with the encasing means is concentrated within the magnetic flux circuit while placement of the pole face surface in proximity to the recording media permits sensitive magnetic flux controlled information exchanges between the media and the head.« less

Method of using an electric field controlled emulsion phase contactor

DOEpatents

Scott, T.C.

1993-11-16

A system is described for contacting liquid phases comprising a column for transporting a liquid phase contacting system, the column having upper and lower regions. The upper region has a nozzle for introducing a dispersed phase and means for applying thereto a vertically oriented high intensity pulsed electric field. This electric field allows improved flow rates while shattering the dispersed phase into many micro-droplets upon exiting the nozzle to form a dispersion within a continuous phase. The lower region employs means for applying to the dispersed phase a horizontally oriented high intensity pulsed electric field so that the dispersed phase undergoes continuous coalescence and redispersion while being urged from side to side as it progresses through the system, increasing greatly the mass transfer opportunity. 5 figures.

Control of edge effects of oxidant electrode

DOEpatents

Carr, Peter; Chi, Chen H.

1981-09-08

Described is an electrode assembly comprising; a. a porous electrode having a first and second exterior face with a cavity formed in the interior between said exterior faces thereby having first and second interior faces positioned opposite the first and second exterior faces; b. a counter electrode positioned facing each of the first and second exterior faces of the porous electrode; c. means for passing an oxidant through said porous electrode; and d. screening means for blocking the interior face of the porous electrode a greater amount than the blocking of the respective exterior face of the porous electrode, thereby maintaining a differential of oxidant electrode surface between the interior face and the exterior face. The electrode assembly is useful in a metal, halogen, halogen hydrate electrical energy storage device.

Method for control of edge effects of oxidant electrode

DOEpatents

Carr, Peter; Chi, Chen H.

1980-12-23

Described is an electrode assembly comprising; a. a porous electrode having a first and second exterior face with a cavity formed in the interior between said exterior faces thereby having first and second interior faces positioned opposite the first and second exterior faces; b. a counter electrode positioned facing each of the first and second exterior faces of the porous electrode; c. means for passing an oxidant through said porous electrode; and d. screening means for blocking the interior face of the porous electrode a greater amount than the blocking of the respective exterior face of the porous electrode, thereby maintaining a differential of oxidant electrode surface between the interior face and the exterior face. The electrode assembly is useful in a metal, halogen, halogen hydrate electrical energy storage device.

Crank angle detecting system for engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuzawa, H.; Nishiyama, M.; Nakamura, K.

1988-05-31

An ignition system for a multi-cylinder internal combustion engine is described comprising: (a) engine cylinders in which spark plugs are installed respectively, (b) indicating means disposed so as to synchronize with an engine crankshaft and formed with a large number of slits and a small number of slits, the large number of slits being provided for indicating crankshaft angular positions and the small number of slits being provided for indicating predetermined piston strokes and wherein the small number of slits have mutually different widths from each other to distinguish between piston strokes of at least the groups of cylinders; (c)more » sensing means for sensing crankshaft angular positions in cooperation with the large number of slits of the indicating means and outputting a crank angle signal representing the crankshaft angular position and for sensing the predetermined piston strokes in cooperation with the small number of slits and outputting different width piston stroke signals corresponding to the different width slits; (d) discriminating means for identifying each cylinder group and outputting cylinder group identification signals on the basis of the different width stroke signals derived from the sensing means; (e) ignition timing determining means for generating an ignition timing signal on the basis of the crank angle signal; (f) ignition coil controlling means for generating ignition coil current signals corresponding to the cylinder group identification signals; and (g) ignition timing controlling means for generating cylinder group ignition signals in response to the ignition coil current signals and ignition timing signal so that the spark plugs of each cylinder group are ignited at a proper time.« less

Control valve and control valve system for controlling solids flow, methods of manufacture thereof and articles comprising the same

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jukkola, Glen D.; Teigen, Bard C.

Disclosed herein is a solids flow control valve comprising a standpipe; a shoe; and a transport pipe; wherein the standpipe is in operative communication with the shoe and lies upstream of the shoe; the standpipe comprising a first end and a second end, where the first end is in contact with a source that contains disposable solids and the second end is in fluid contact with the shoe; the shoe being operative to restrict the flow of the disposable solids; the transport pipe being disposed downstream of the shoe to receive and transport the solids from the shoe.

Hyperserotonemia in adults with autistic disorder.

PubMed

Hranilovic, Dubravka; Bujas-Petkovic, Zorana; Vragovic, Renata; Vuk, Tomislav; Hock, Karlo; Jernej, Branimir

2007-11-01

Hyperserotonemia is the most consistent serotonin-related finding in autism. The basis of this phenomenon, and its relationship to the central serotonergic dysfunction remains unclear. Platelet serotonin level (PSL) in 53 autistic adults and 45 healthy controls was measured. Mean PSL in autistic group (75.7 +/- 37.4 ng/microL) was significantly higher than the control sample (59.2 +/- 16.2 ng/microL) due to a presence of hyperserotonemic subjects which comprised 32% of the patients. PSL of autistic subjects did not correlate with the severity of symptoms, as measured by total CARS score, or the degree of mental retardation. However, significant negative relationship was observed between PSL and speech development, indicating the relationship between the peripheral 5HT concentrations and verbal abilities in autistic subjects.

Stereoscopic optical viewing system

DOEpatents

Tallman, C.S.

1986-05-02

An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

Dynamic frequency tuning of electric and magnetic metamaterial response

DOEpatents

O'Hara, John F; Averitt, Richard; Padilla, Willie; Chen, Hou-Tong

2014-09-16

A geometrically modifiable resonator is comprised of a resonator disposed on a substrate, and a means for geometrically modifying the resonator. The geometrically modifiable resonator can achieve active optical and/or electronic control of the frequency response in metamaterials and/or frequency selective surfaces, potentially with sub-picosecond response times. Additionally, the methods taught here can be applied to discrete geometrically modifiable circuit components such as inductors and capacitors. Principally, controlled conductivity regions, using either reversible photodoping or voltage induced depletion activation, are used to modify the geometries of circuit components, thus allowing frequency tuning of resonators without otherwise affecting the bulk substrate electrical properties. The concept is valid over any frequency range in which metamaterials are designed to operate.

Stereoscopic optical viewing system

DOEpatents

Tallman, Clifford S.

1987-01-01

An improved optical system which provides the operator a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

High incidence of zinc deficiency among Filipino children with compensated and decompensated liver disease.

PubMed

Umusig-Quitain, Perlina; Gregorio, Germana V

2010-02-01

The role of zinc in the nutrition and growth of children with chronic liver disease is poorly defined. The present study determined the serum zinc levels of children with compensated liver disease (CLD) and decompensated liver disease (DLD) and compared this with healthy children. Zinc levels were also correlated with the severity of liver disease as measured by Child-Pugh scores. The study comprised of 60 children 0-10 years of age with chronic liver disease, defined as CLD (n = 30) if the Child-Pugh score was < 6, and DLD (n = 30) if the Child-Pugh score was > or = 6. Thirty healthy children 0-10 years served as controls. Serum zinc levels were measured by atomic absorption spectrometry. The 90 patients included 30 with CLD (mean age: 4.54 years: 21 boys; mean Child-Pugh score: 5.83), 30 with DLD (mean age: 1.39 years; 17 boys; mean Child-Pugh score: 9.53) and 30 healthy children (mean age: 4.6; 16 boys). Zinc levels of patients with CLD were significantly lower compared with the healthy controls (Mean [standard deviation]: 68.07 [31.55]vs 89.9 [25.9]microg/dL, P = 0.000), but significantly higher compared to the patients with DLD (48.8 [26.8]microg/dL). Correlation studies showed that the higher the Child-Pugh score, the lower the zinc levels (r = -0.460) Children with chronic liver disease, whether in a compensated or decompensated state, had lower serum zinc levels compared with the healthy controls. As the severity of liver disease worsened, the zinc levels decreased. The study suggests that zinc supplementation should constitute part of the micronutrient intake of children with chronic liver disease.

Photomultiplier circuit including means for rapidly reducing the sensitivity thereof. [and protection from radiation damage

NASA Technical Reports Server (NTRS)

Mcclenahan, J. O. (Inventor)

1974-01-01

A simple, reliable and inexpensive control circuit is described for rapidly reducing the bias voltage across one or more of the dynode stages of a photomultiplier, to substantially decrease its sensitivity to incoming light at those times where excess light intensity might damage the tube. The control circuit comprises a switching device, such as a silicon controlled rectifier (SCR), coupled between a pair of the electrodes in the tube, preferably the cathode and first dynode, or the first and second dynodes, the switching device operating in response to a trigger pulse applied to its gate to short circuit the two electrodes. To insure the desired reduction in sensitivity, two switching stages, the devices be employed between two of the electrode stages, the devices being operated simultaneously to short circuit both stages.

Control and acquisition system of a space instrument for cosmic ray measurement

NASA Astrophysics Data System (ADS)

Prieto, M.; Martín, C.; Quesada, M.; Meziat, D.; Medina, J.; Sánchez, S.; Rodríguez-Frías, M. D.

2000-04-01

The PESCA Instrument Control and Acquisition System (PICAS) design, building and tests are presented. The purpose of the PESCA instrument is the study of the Solar Energetic Particles and the Anomalous Cosmic Rays. It is, therefore, a satellite on-board instrument. The PICAS is basically a computer, composed of a microprocessor with a memory block and a set of interfaces for the communication with the rest of the instrument and the satellite. The PICAS manages all the comunication processes with the satellite, that comprises the order reception from the ground station, and the telemetry sending, that includes scientific data and housekeeping data. By means of telecommands, the PICAS is completely controllable from the ground. The PICAS is also a reliable data acquisition system that guarantees the correct reception of the Cosmic Rays data collected in the ground.

Compact illumination optic with three freeform surfaces for improved beam control.

PubMed

Sorgato, Simone; Mohedano, Rubén; Chaves, Julio; Hernández, Maikel; Blen, José; Grabovičkić, Dejan; Benítez, Pablo; Miñano, Juan Carlos; Thienpont, Hugo; Duerr, Fabian

2017-11-27

Multi-chip and large size LEDs dominate the lighting market in developed countries these days. Nevertheless, a general optical design method to create prescribed intensity patterns for this type of extended sources does not exist. We present a design strategy in which the source and the target pattern are described by means of "edge wavefronts" of the system. The goal is then finding an optic coupling these wavefronts, which in the current work is a monolithic part comprising up to three freeform surfaces calculated with the simultaneous multiple surface (SMS) method. The resulting optic fully controls, for the first time, three freeform wavefronts, one more than previous SMS designs. Simulations with extended LEDs demonstrate improved intensity tailoring capabilities, confirming the effectiveness of our method and suggesting that enhanced performance features can be achieved by controlling additional wavefronts.

Evaluation of a multidisciplinary rehabilitation programme for elderly patients with hip fracture: A prospective cohort study.

PubMed

Cheung, Wing-Hoi; Shen, Wan-Yiu; Dai, David Lok-Kwan; Lee, Kin Bong; Zhu, Tracy Y; Wong, Ronald Man-Yeung; Leung, Kwok-Sui

2018-02-28

To investigate the effectiveness and cost of an 18-month multi-disciplinary Comprehensive Fragility Fracture Management Program (CFFMP) for fragility hip fracture patients. Prospective cohort study. Elderly patients with hip fracture were recruited at their first postoperative follow-up in 2 district hospitals. The intervention group comprised patients from the hospital undergoing CFFMP, and the control group comprised patients from another hospital undergoing conventional care. CFFMP provided geri-orthopaedic co-management, physician consultations, group-exercise and vibration-therapy. Timed-up-and-go test (TUG), Elderly Mobility Scale (EMS), Berg Balance Scale (BBS) and fall risk screening (FS) were used to assess functional performance. Incidences of falls and secondary fractures, the cost of the programme and related healthcare resources were recorded. A total of 76 patients were included in the intervention group (mean age 77.9 years ((standard deviation; SD) 6.1) ) and 77 in the control group (79.9 (SD 7.2)), respectively. The re-fracture rate in the control group (10.39%) was significantly higher than in the intervention group (1.32%) (p = 0.034). The intervention group improved significantly in TUG, EMS and FS after a 1-year programme. The overall healthcare costs per patient in the intervention and control groups were US$22,450 and US$25,313, respectively. Multi-disciplinary CFFMP is effective, with reduced overall cost, reduced length of hospital stay and reduced secondary fracture rate. The rehabilitation community service favours rehabilitation and improved quality of life of hip fracture patients.

Controller for controlling operation of at least one electrical load operating on an AC supply, and a method thereof

DOEpatents

Cantin, Luc; Deschenes, Mario; D'Amours, Mario

1995-08-15

A controller is provided for controlling operation of at least one electrical load operating on an AC supply having a typical frequency, the AC supply being provided via power transformers by an electrical power distribution grid. The controller is associated with the load and comprises an input interface for coupling the controller to the grid, a frequency detector for detecting the frequency of the AC supply and producing a signal indicative of the frequency, memory modules for storing preprogrammed commands, a frequency monitor for reading the signal indicative of the frequency and producing frequency data derived thereof, a selector for selecting at least one of the preprogrammed commands with respect to the frequency data, a control unit for producing at least one command signal representative of the selected preprogrammed commands, and an output interface including a device responsive to the command signal for controlling the load. Therefore, the load can be controlled by means of the controller depending on the frequency of the AC supply.

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

Vitamin D levels among pregnant and lactating women.

PubMed

Sharif, Saima; Farasat, Tasnim; Shoaib, Hamna; Saqib, Muhammad; Fazal, Sabiha

2013-12-01

To assess the serum level of vitamin D in pregnant and lactating women. Case-control study. Gynaecological Unit 1 of Jinnah Hospital, Lahore, from December 2010 to May 2011. A total of 100 women comprised of three groups: pregnant (n = 40), lactating (n = 40) and control (n = 20) groups. The information regarding age, educational level, socioeconomic status, exposure to sunlight and dietary vitamin D intake were collected through self-structured questionnaire. Serum concentration of vitamin D was measured by ELISA and serum calcium and phosphate levels were measured by chemistry analyzer. Statistical analysis was done using SPSS (version 13). The values were considered significant at 0.05 level of significance. The mean serum vitamin D level in the pregnant and lactating mothers was 26.5 ± 17.1 nmol/L and 21.4 ± 16.3 nmol/L respectively and in control group was 33.8 ± 21.1 nmol/L. The mean calcium level in the pregnant, lactating and control group was 10.3 ± 1.2 mg/dL, 9.7 ± 1.3 mg/dL and 9.7 ± 1.3 mg/dL respectively. The mean phosphate in pregnant was 3.2 ± 0.76 mg/dl, in lactating was 3.3 ± 0.76 mg/dl and in control was 3.5 ± 0.92 mg/dl. Significant difference (p = 0.041 and p = 0.037 respectively) in the serum levels of vitamin D and calcium was observed among the pregnant and lactating women as compared to control group. Low serum vitamin D concentration was observed in lactating women and pregnant women as compared to control group.

Muscular adaptations in low- versus high-load resistance training: A meta-analysis.

PubMed

Schoenfeld, Brad J; Wilson, Jacob M; Lowery, Ryan P; Krieger, James W

2016-01-01

There has been much debate as to optimal loading strategies for maximising the adaptive response to resistance exercise. The purpose of this paper therefore was to conduct a meta-analysis of randomised controlled trials to compare the effects of low-load (≤60% 1 repetition maximum [RM]) versus high-load (≥65% 1 RM) training in enhancing post-exercise muscular adaptations. The strength analysis comprised 251 subjects and 32 effect sizes (ESs), nested within 20 treatment groups and 9 studies. The hypertrophy analysis comprised 191 subjects and 34 ESs, nested with 17 treatment groups and 8 studies. There was a trend for strength outcomes to be greater with high loads compared to low loads (difference = 1.07 ± 0.60; CI: -0.18, 2.32; p = 0.09). The mean ES for low loads was 1.23 ± 0.43 (CI: 0.32, 2.13). The mean ES for high loads was 2.30 ± 0.43 (CI: 1.41, 3.19). There was a trend for hypertrophy outcomes to be greater with high loads compared to low loads (difference = 0.43 ± 0.24; CI: -0.05, 0.92; p = 0.076). The mean ES for low loads was 0.39 ± 0.17 (CI: 0.05, 0.73). The mean ES for high loads was 0.82 ± 0.17 (CI: 0.49, 1.16). In conclusion, training with loads ≤50% 1 RM was found to promote substantial increases in muscle strength and hypertrophy in untrained individuals, but a trend was noted for superiority of heavy loading with respect to these outcome measures with null findings likely attributed to a relatively small number of studies on the topic.

Lenticular astigmatism in tilted disc syndrome.

PubMed

Gündüz, Abuzer; Evereklioglu, Cem; Er, Hamdi; Hepşen, Ibrahim F

2002-10-01

To evaluate whether an abnormal optic disc shape in patients with tilted disc syndrome (TDS) is associated with an abnormal configuration of the crystalline lens measured as lenticular astigmatism. Department of Ophthalmology, Inönü University Medical Faculty, Turgut Ozal Medical Center, Malatya, Turkey. This cross-sectional masked case-control study comprised 32 eyes of 32 patients with established TDS (13 men, 19 women; mean age 21.31 years +/- 7.05 [SD]) and 20 age- and sex-matched healthy control subjects (8 men, 12 women; mean age 22.65 +/- 7.11 years) with a comparable amount of myopic astigmatism (spherical equivalent) without TDS. The optic disc was morphometrically analyzed by planimetric evaluation of optic disc photographs. The total refractive and keratometric corneal astigmatism was obtained, and lenticular astigmatism was calculated by vector analysis. The Mann-Whitney U test was used for statistical analysis; 1 eye of each patient was evaluated in both groups. A P value less than 0.05 was considered statistically significant. The mean spherical equivalent refraction was comparable in TDS patients (-4.73 +/- 1.12 diopters [D]) and controls (-4.28 +/- 1.29 D) (P =.210). The mean total astigmatism was higher in TDS patients (-2.96 +/- 1.04 D) than in the controls (-2.51 +/- 1.09 D), but the difference was not significant (P =.151). The mean corneal astigmatism was comparable in TDS patients (-2.07 +/- 0.83 D) and controls (-2.28 +/- 0.87 D) (P =.454), but the calculated mean lenticular astigmatism was significantly higher in TDS patients (-1.31 +/- 0.98 D and -0.20 +/- 0.35 D, respectively) (P <.001). Twenty-nine of 32 TDS patients (90.6%) had lenticular astigmatism; in 16 (50%), it was greater than -1.00 D. Lenticular astigmatism was present in 7 controls (35%); in 2 (10%), it was greater than -1.00 D. The mean keratometry was significantly higher in TDS patients (43.84 +/- 1.06 D) than in the controls (42.75 +/- 1.45 D) (P =.011). Clinically significant lenticular astigmatism was present in TDS patients. If an abnormal optic disc shape is found on ophthalmoscopy, lenticular astigmatism as well as corneal astigmatism should be carefully evaluated to prevent an unsatisfactory refractive outcome, especially in refractive surgery candidates.

Neural network based automatic limit prediction and avoidance system and method

NASA Technical Reports Server (NTRS)

Calise, Anthony J. (Inventor); Prasad, Jonnalagadda V. R. (Inventor); Horn, Joseph F. (Inventor)

2001-01-01

A method for performance envelope boundary cueing for a vehicle control system comprises the steps of formulating a prediction system for a neural network and training the neural network to predict values of limited parameters as a function of current control positions and current vehicle operating conditions. The method further comprises the steps of applying the neural network to the control system of the vehicle, where the vehicle has capability for measuring current control positions and current vehicle operating conditions. The neural network generates a map of current control positions and vehicle operating conditions versus the limited parameters in a pre-determined vehicle operating condition. The method estimates critical control deflections from the current control positions required to drive the vehicle to a performance envelope boundary. Finally, the method comprises the steps of communicating the critical control deflection to the vehicle control system; and driving the vehicle control system to provide a tactile cue to an operator of the vehicle as the control positions approach the critical control deflections.

Effect of HCV on fasting glucose, fasting insulin and peripheral insulin resistance in first 5 years of infection.

PubMed

Ahmed, Naeema; Rashid, Amir; Naveed, Abdul Khaliq; Bashir, Qudsia

2016-02-01

To assess the effects of hepatitis C virus infection in the first 5 years on fasting glucose, fasting insulin and peripheral insulin resistance. The case-control study was conducted at the Army Medical College, Rawalpindi, from December 2011 to November 2012, and comprised subjects recruited from a government hospital in Rawalpindi. The subjects included known cases of hepatitis C virus infection for at least 5 years, and normal healthy controls. Fasting blood samples of all the subjects were collected and analysed for serum fasting insulin and serum fasting glucose levels. Homeostatic model assessment-Insulin resistance was calculated SPSS 11 was used for statistical analysis. Of the 30 subjects, 20(66.6%) were cases, while 10(33.3%) were controls. Serum fasting glucose mean level in cases was 89.55±9.53 compared to 84.40±9.80 in the controls (p=0.188). The mean serum fasting insulin in controls was 7.52±3.23 and 6.79±3.30 in cases (p=0.567). Homeostatic model assessment-Insulin resistance level in controls was 1.60±0.76 and In the cases it was 1.49±0.74 (p=0.695). Peripheral insulin resistance and development of type 2 diabetes as a complication of hepatitis C virus infection was not likely at least within the first five years of infection.

Container for reprocessing and permanent storage of spent nuclear fuel assemblies

DOEpatents

Forsberg, C.W.

1992-03-24

A single canister process container is described for reprocessing and permanent storage of spent nuclear fuel assemblies comprising zirconium-based cladding and fuel, which process container comprises a collapsible container, having side walls that are made of a high temperature alloy and an array of collapsible support means wherein the container is capable of withstanding temperature necessary to oxidize the zirconium-based cladding and having sufficient ductility to maintain integrity when collapsed under pressure. The support means is also capable of maintaining its integrity at a temperature necessary to oxidize the zirconium-based cladding. The process container also has means to introduce and remove fluids to and from the container. 10 figs.

Fuel cell generator

DOEpatents

Makiel, Joseph M.

1985-01-01

A high temperature solid electrolyte fuel cell generator comprising a housing means defining a plurality of chambers including a generator chamber and a combustion products chamber, a porous barrier separating the generator and combustion product chambers, a plurality of elongated annular fuel cells each having a closed end and an open end with the open ends disposed within the combustion product chamber, the cells extending from the open end through the porous barrier and into the generator chamber, a conduit for each cell, each conduit extending into a portion of each cell disposed within the generator chamber, each conduit having means for discharging a first gaseous reactant within each fuel cell, exhaust means for exhausting the combustion product chamber, manifolding means for supplying the first gaseous reactant to the conduits with the manifolding means disposed within the combustion product chamber between the porous barrier and the exhaust means and the manifolding means further comprising support and bypass means for providing support of the manifolding means within the housing while allowing combustion products from the first and a second gaseous reactant to flow past the manifolding means to the exhaust means, and means for flowing the second gaseous reactant into the generator chamber.

The effects of concept and vee mappings under three learning modes on Jamaican eighth graders' knowledge of nutrition and plant reproduction

NASA Astrophysics Data System (ADS)

Ugwu, Okechukwu; Soyibo, Kola

2004-01-01

The first objective of this study was to investigate if the experimental students' post-test knowledge of nutrition and plant reproduction would be improved more significantly than that of their control group counterparts based on their treatment, attitudes to science, self-esteem, gender and socio-economic background. Treatment involved teaching the experimental students under three learning modes--pure cooperative, cooperative-competitive and individualistic whole class interpersonal competitive condition--using concept and vee mappings and the lecture method. The control groups received the same treatment but were not exposed to concept and vee mappings. This study's second objective was to determine which of the three learning modes would produce the highest post-test mean gain in the subjects' knowledge of the two biology concepts. The study's sample comprised 932 eighth graders (12-13-year-olds) in 14 co-educational comprehensive high schools randomly selected from two Jamaican parishes. An integrated science performance test, an attitudes to science questionnaire and a self-esteem questionnaire were used to collect data. The results indicated that the experimental students (a) under the three learning modes, (b) with high, moderate, and low attitudes to science, and (c) with high, moderate, and low self-esteem, performed significantly better than their control group counterparts. The individualist whole class learning mode engendered the highest mean gain on the experimental students' knowledge, while the cooperative-competitive learning mode generated the highest mean gain for the control group students.

Change Blindness as a Means of Studying Expertise in Physics

ERIC Educational Resources Information Center

Feil, Adam; Mestre, Jose P.

2010-01-01

Previous studies examining expertise have used a wide range of methods. Beyond characterizing expert and novice behavior in different contexts and circumstances, many studies have examined the processes that comprise the behavior itself and, more recently, processes that comprise training and practice that develop expertise. Other studies, dating…

Comparison of tissue Doppler echocardiography parameters in patients with end-stage renal disease and renal transplant recipients.

PubMed

Pirat, B; Bozbas, H; Demirtas, S; Simsek, V; Sayin, B; Colak, T; Sade, E; Ulucam, M; Muderrisoglu, H; Haberal, M

2008-01-01

Tissue Doppler echocardiography has been introduced as a useful tool to assess systolic myocardial function. In this study we sought to compare patients with end-stage renal disease (ESRD), with renal transplantations and control subjects with regard to tissue Doppler parameters. Thirty recipients with functional grafts of overall mean age 36 +/- 7 years included 24 men. An equal number of patients with ESRD of overall mean age 35 +/- 7 years included 20 men. A third cohort was comprised of 20 age- and gender matched control subjects. Tissue Doppler imaging from the septal and lateral mitral annulus of the left ventricle and free wall of the right ventricle was performed from a 4-chamber view. Mean systolic and diastolic blood pressures were similar among the groups during imaging. Peak systolic velocity (S wave) at the septal annulus was similar in control subjects and recipients. S waves were significantly lower among ESRD patients compared with recipients (10.3 +/- 2.1 vs 12.0 +/- 2.5 cm/s, P = .04, respectively). Isovolumic contraction velocity of the septum and the right ventricular wall were significantly lower in ESRD patients than recipients or controls: 10.2 +/- 2.6 vs 12.5 +/- 2.8 vs 11.4 +/- 1.8 cm/s for septal wall (P = .008) and 13.9 +/- 3.6 vs 17.9 +/- 5.1 vs 16.8 +/- 5.8, for right ventricle (P = .01). Systolic indices of tissue Doppler echocardiography in recipients demonstrated similar values as control subjects and increased values compared with ESRD patients. These results suggested improvement in systolic myocardial function following renal transplantation.

Population-based study of Hodgkin's lymphoma in Kuwait.

PubMed

Alshemmari, S; Sajnani, K P; Refaat, S; Albassami, A

2011-01-01

Hodgkin lymphoma (HL) comprises about 25% of all malignant nodal lymphomas worldwide. Incidence of HL has been increasing in many countries around the world, in the western countries in particular. Cancer incidence variations in different ethnic groups in the same country can lead to some important information about the search of etiological factors. Some researchers found an association between ethnicity and increased risk of HL. In this study, we evaluated the epidemiologic and clinical characteristics of patients with HL and the HL subtypes in Kuwait who were diagnosed between 1998 and 2006 and we analyzed the changes in the incidence of HL over time based on age, sex, and ethnicity. The Kuwait Cancer Control Center is a tertiary referral hospital and the only cancer hospital in the entire state of Kuwait. We identified 293 patients who were newly diagnosed with HL by histopathology between January 1, 1998, and December 31, 2006, at the Kuwait Cancer Control Center. Incidence data were crossvalidated with the population-based Cancer Registry of Kuwait. Clinical data were obtained by reviewing the patients' medical records. The median age at diagnosis was 39 years (range, 10-85 years) for patients with cHL and 36 years (range, 14-51 years) for patients with NLPHL. The age-adjusted incidence rate was 2.1 cases (range, 1.2-2.9) per 100,000 people per year in the period between 1998 and 2006. NLPHL and cHL were predominant in men with a male to female ratio of 2:1. However, the mean annual percentage change in HL incidence among Kuwaiti patients and non-Kuwaiti patients per year showed unexplained higher percentage in females both Kuwaiti and non-Kuwaiti. cHL comprised 92.5% of all HL cases and NLPHL comprised 7.5%. Nodular sclerosis was the predominant histologic subtype of cHL (58.9%), whereas mixed cellularity was the second most frequent histologic subtype of cHL, (25.9%). Although the incidence of HL was slightly lower in Kuwait than the worldwide incidence; it was similar to Asian descent population. Incidence of HL varied in the same country among different ethnic subgroups. The mean annual percentage change increased in Kuwaiti and non-Kuwaiti females.

Systems and methods for detection of blowout precursors in combustors

DOEpatents

Lieuwen, Tim C.; Nair, Suraj

2006-08-15

The present invention comprises systems and methods for detecting flame blowout precursors in combustors. The blowout precursor detection system comprises a combustor, a pressure measuring device, and blowout precursor detection unit. A combustion controller may also be used to control combustor parameters. The methods of the present invention comprise receiving pressure data measured by an acoustic pressure measuring device, performing one or a combination of spectral analysis, statistical analysis, and wavelet analysis on received pressure data, and determining the existence of a blowout precursor based on such analyses. The spectral analysis, statistical analysis, and wavelet analysis further comprise their respective sub-methods to determine the existence of blowout precursors.

Cold-Drawn Bioabsorbable Ferrous and Ferrous Composite Wires: An Evaluation of Mechanical Strength and Fatigue Durability

NASA Astrophysics Data System (ADS)

Schaffer, Jeremy E.; Nauman, Eric A.; Stanciu, Lia A.

2012-08-01

Yield strengths exceeding 1 GPa with elastic strains exceeding 1 pct were measured in novel bioabsorbable wire materials comprising high-purity iron (Fe), manganese (Mn), magnesium (Mn), and zinc (Zn), which may enable the development of self-expandable, bioabsorbable, wire-based endovascular stents. The high strength of these materials is attributed to the fine microstructure and fiber textures achieved through cold drawing techniques. Bioabsorbable vascular stents comprising nutrient metal compositions may provide a means to overcome the limitations of polymer-based bioabsorbable stents such as excessive strut thickness and poor degradation rate control. Thin, 125- μm wires comprising combinations of ferrous alloys surrounding a relatively anodic nonferrous core were manufactured and tested using monotonic and cyclic techniques. The strength and durability properties are tested in air and in body temperature phosphate-buffered saline, and then they were compared with cold-drawn 316L stainless steel wire. The antiferromagnetic Fe35Mn-Mg composite wire exhibited more than 7 pct greater elasticity (1.12 pct vs 1.04 pct engineering strain), similar fatigue strength in air, an ultimate strength of more than 1.4 GPa, and a toughness exceeding 35 mJ/mm3 compared with 30 mJ/mm3 for 316L.

Control and protection system for an installation for the combined production of electrical and thermal energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agazzone, U.; Ausiello, F.P.

1981-06-23

A power-generating installation comprises a plurality of modular power plants each comprised of an internal combustion engine connected to an electric machine. The electric machine is used to start the engine and thereafter operates as a generator supplying power to an electrical network common to all the modular plants. The installation has a control and protection system comprising a plurality of control modules each associated with a respective plant, and a central unit passing control signals to the modules to control starting and stopping of the individual power plants. Upon the detection of abnormal operation or failure of its associatedmore » power plant, each control module transmits an alarm signal back to the central unit which thereupon stops, or prevents the starting, of the corresponding power plant. Parameters monitored by each control module include generated current and inter-winding leakage current of the electric machine.« less

Sick leave and disability pension before and after diagnosis of multiple sclerosis.

PubMed

Landfeldt, Erik; Castelo-Branco, Anna; Svedbom, Axel; Löfroth, Emil; Kavaliunas, Andrius; Hillert, Jan

2016-12-01

Multiple sclerosis (MS) is associated with considerable morbidity and serious disability, but little is known of the long-term impact of the disease on work ability. To assess sick leave (short-term absence) and disability pension (long-term absence) before and after diagnosis of MS. Patients with MS in Sweden were identified in a nationwide disease-specific register and matched with general population controls. Sick leave and disability pension were measured before and after index (i.e. the MS diagnosis date). The final sample comprised 6092 patients and 60,345 controls (mean age 39 years; 70% female). The mean annual prevalence of sick leave ranged from 12% the first year after index to 23% after 11 years among patients and from 13% to 13% among controls. Corresponding estimates for disability pension were 12% and 55% for patients and 7% and 9% for controls. Significant differences in sick leave were observed up to 15 years before index and 3 years for disability pension. Patients with MS in Sweden have elevated levels of sick leave and disability pension up to 15 years before disease diagnosis. Our results highlight the burden of disease on affected patients and society and underscore the substantial unmet medical need. © The Author(s), 2016.

40 CFR 205.51 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with combat or tactical vehicles. (13) Exhaust System means the system comprised of a combination of...) Gross Combination Weight Rating (GCWR) means the value specified by the manufacturer as the loaded weight of a combination vehicle. (15) Gross Vehicle Weight Rating (GVWR) means the value specified by the...

40 CFR 205.51 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with combat or tactical vehicles. (13) Exhaust System means the system comprised of a combination of...) Gross Combination Weight Rating (GCWR) means the value specified by the manufacturer as the loaded weight of a combination vehicle. (15) Gross Vehicle Weight Rating (GVWR) means the value specified by the...

40 CFR 205.51 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with combat or tactical vehicles. (13) Exhaust System means the system comprised of a combination of...) Gross Combination Weight Rating (GCWR) means the value specified by the manufacturer as the loaded weight of a combination vehicle. (15) Gross Vehicle Weight Rating (GVWR) means the value specified by the...

40 CFR 205.51 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... with combat or tactical vehicles. (13) Exhaust System means the system comprised of a combination of...) Gross Combination Weight Rating (GCWR) means the value specified by the manufacturer as the loaded weight of a combination vehicle. (15) Gross Vehicle Weight Rating (GVWR) means the value specified by the...

The impact of primary open-angle glaucoma: Quality of life in Indian patients

PubMed Central

Kumar, Suresh; Ichhpujani, Parul; Singh, Roopali; Thakur, Sahil; Sharma, Madhu; Nagpal, Nimisha

2018-01-01

Purpose: Glaucoma significantly affects the quality of life (QoL) of a patient. Despite the huge number of glaucoma patients in India, not many, QoL studies have been carried out. The purpose of the present study was to evaluate the QoL in Indian patients with varying severity of glaucoma. Methods: This was a hospital-based, cross-sectional, analytical study of 180 patients. The QoL was assessed using orally administered QoL instruments comprising of two glaucoma-specific instruments; Glaucoma Quality of Life-15 (GQL-15) and Viswanathan 10 instrument, and 1 vision-specific instrument; National Eye Institute Visual Function Questionnaire-25 (NEIVFQ25). Results: Using NEIVFQ25, the difference between mean QoL scores among cases (88.34 ± 4.53) and controls (95.32 ± 5.76) was statistically significant. In GQL-15, there was a statistically significant difference between mean scores of cases (22.58 ± 5.23) and controls (16.52 ± 1.24). The difference in mean scores with Viswanathan 10 instrument in cases (7.92 ± 0.54) and controls (9.475 ± 0.505) was also statistically significant. QoL scores also showed moderate correlation with mean deviation, pattern standard deviation, and vertical cup-disc ratio. Conclusion: In our study, all the three instruments showed decrease in QoL in glaucoma patients compared to controls. With the increase in severity of glaucoma, corresponding decrease in QoL was observed. It is important for ophthalmologists to understand about the QoL in glaucoma patients so as to have a more holistic approach to patients and for effective delivery of treatment. PMID:29480254

Controllable magneto-rheological fluid-based dampers for drilling

DOEpatents

Raymond, David W [Edgewood, NM; Elsayed, Mostafa Ahmed [Youngsville, LA

2006-05-02

A damping apparatus and method for a drillstring comprising a bit comprising providing to the drillstring a damping mechanism comprising magnetorheological fluid and generating an electromagnetic field affecting the magnetorheological fluid in response to changing ambient conditions encountered by the bit.

Patents -- Georges Charpak (1981-1988)

Science.gov Websites

to the sheet and means to measure the charges induced on this probe. In addition, by means of charges induced on said probe. This electronic circuit comprises an operational transimpedance amplifier

Advanced surface-enhanced Raman gene probe systems and methods thereof

DOEpatents

Vo-Dinh, Tuan

2001-01-01

The subject invention is a series of methods and systems for using the Surface-Enhanced Raman (SER)-labeled Gene Probe for hybridization, detection and identification of SER-labeled hybridized target oligonucleotide material comprising the steps of immobilizing SER-labeled hybridized target oligonucleotide material on a support means, wherein the SER-labeled hybridized target oligonucleotide material comprise a SER label attached either to a target oligonucleotide of unknown sequence or to a gene probe of known sequence complementary to the target oligonucleotide sequence, the SER label is unique for the target oligonucleotide strands of a particular sequence wherein the SER-labeled oligonucleotide is hybridized to its complementary oligonucleotide strand, then the support means having the SER-labeled hybridized target oligonucleotide material adsorbed thereon is SERS activated with a SERS activating means, then the support means is analyzed.

Fatigue, anxiety and depression overrule the role of oncological treatment in predicting self-reported health complaints in women with breast cancer compared to healthy controls.

PubMed

Hagen, Kari Britt; Aas, Turid; Kvaløy, Jan Terje; Eriksen, Hege R; Søiland, Håvard; Lind, Ragna

2016-08-01

Women with breast cancer often attribute their health problems as side effects caused by oncological treatments. The aim of the study was to examine and compare self-reported health complaints (SHC) in postmenopausal patients with breast cancer to healthy controls. Women with breast cancer (N = 196) filled in 5 questionnaires 1-2 years after surgery; SHC Inventory, Functional Assessment of Cancer Therapy-Endocrine Subscale (FACT-ES), Fatigue - Functional Assessment of Cancer Therapy-Fatigue subscale (FACIT-F), Fatigue Visual Analog Scale (Fatigue VAS), and Hospital Anxiety and Depression Scale (HADS). Controls comprised 101 blood donors who reported on the questionnaires except for HADS. Bonferroni adjustment and p < 0.0017 was considered statistically significant for SHC Inventory, p < 0.05 for the remaining questionnaires. The patients, mean age 58.0 (SD 9.5), reported significantly more self-reported health complaints, whereof 6 of 29 complaints were significantly elevated compared to the controls, mean age 57.0 (SD 5.8) (p < 0.001). HADS scores in patients fell into normal range, mean 6.3 (SD 5.7). A subgroup of 48 patients experienced more frequent and severe symptoms in all the questionnaires compared to the remaining 148 patients, and the 101 controls. Among the patients, fatigue, anxiety and depression explained 49% of the total variance in self-reported health complaints (p ≤ 0.001). Most women with breast cancer (76%) reported health complaints equal to the healthy controls. Fatigue, anxiety and depression, not oncological treatments, were significant predictors for the complaints. Copyright © 2016 Elsevier Ltd. All rights reserved.

Variable frequency microprocessor clock generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branson, C.N.

A microprocessor-based system is described comprising: a digital central microprocessor provided with a clock input and having a rate of operation determined by the frequency of a clock signal input thereto; memory means operably coupled to the central microprocessor for storing programs respectively including a plurality of instructions and addressable by the central microprocessor; peripheral device operably connected to the central microprocessor, the first peripheral device being addressable by the central microprocessor for control thereby; a system clock generator for generating a digital reference clock signal having a reference frequency rate; and frequency rate reduction circuit means connected between themore » clock generator and the clock input of the central microprocessor for selectively dividing the reference clock signal to generate a microprocessor clock signal as an input to the central microprocessor for clocking the central microprocessor.« less

Dry Eye Syndrome in Non-Exophthalmic Graves' Disease.

PubMed

Bruscolini, A; Abbouda, A; Locuratolo, N; Restivo, L; Trimboli, P; Romanelli, F

2015-01-01

The present study aims to assess qualitative and quantitative characteristics of tear film and corneal related impairment and to evaluate the quality of life in a cohort of non-exophthalmic Graves' disease (GD) patients. The series comprised 50 eyes from 25 newly diagnosed GD patients with no proptosis. As control group, 56 eyes of 28 thyroid disease-free subjects were enrolled. The results of Schirmer I and II, break-up time, and Oxford scheme showed a significant difference between GD and controls. By ocular surface disease index (OSDI) questionnaire, eleven (44%) GD patients had normal ocular surface, while two (8%) had mild, four (16%) had moderate, and eight (32%) had severe dry eye. The mean score of the OSDI in the GD group was significantly (p < 0.001) higher with respect to the control group. This study shows that the tear film and cornea are damaged in newly non-exophthalmic GD subjects.

Erosion resistant elbow for solids conveyance

DOEpatents

Everett, J.W.

1984-10-23

An elbow and process for fabrication for use in particulate material conveyancing comprises a curved outer pipe, a curved inner pipe having the same radius of curvature as the outer pipe, concentric with and internal to the outer pipe, comprising an outer layer comprised of a first material and an inner layer comprised of a second material wherein said first material is characterized by high erosion resistance when impinged by particulate material and wherein said second material is characterized by high tensile strength and flexibility, and an inner pipe supporting means for providing support to said inner pipe, disposed between said inner pipe and said outer pipe. 4 figs.

Erosion resistant elbow for solids conveyance

DOEpatents

Everett, James W.

1984-10-23

An elbow and process for fabrication for use in particulate material conveyancing comprising a curved outer pipe, a curved inner pipe having the same radius of curvature as the outer pipe, concentric with and internal to the outer pipe, comprising an outer layer comprised of a first material and an inner layer comprised of a second material wherein said first material is characterized by high erosion resistance when impinged by particulate material and wherein said second material is characterized by high tensile strength and flexibility, and an inner pipe supporting means for providing support to said inner pipe, disposed between said inner pipe and said outer pipe.

Ultra-low field nuclear magnetic resonance and magnetic resonance imaging to discriminate and identify materials

DOEpatents

Matlashov, Andrei Nikolaevich; Urbaitis, Algis V.; Savukov, Igor Mykhaylovich; Espy, Michelle A.; Volegov, Petr Lvovich; Kraus, Jr., Robert Henry

2013-03-05

Method comprising obtaining an NMR measurement from a sample wherein an ultra-low field NMR system probes the sample and produces the NMR measurement and wherein a sampling temperature, prepolarizing field, and measurement field are known; detecting the NMR measurement by means of inductive coils; analyzing the NMR measurement to obtain at least one measurement feature wherein the measurement feature comprises T1, T2, T1.rho., or the frequency dependence thereof; and, searching for the at least one measurement feature within a database comprising NMR reference data for at least one material to determine if the sample comprises a material of interest.

Erosion resistant elbow for solids conveyance

DOEpatents

Not Available

An elvow and process for fabrication for use in particulate material conveying comprising a curved outer pipe, a curved inner pipe having the same radius of curvature as the outer pipe, concentric with and internal to the outer pipe, comprising an outer layer comprised of a first material and an inner layer comprised of a second material wherein said first material is characterized by high erosion resistance when impinged by particulate material and wherein said second material is characterized by high tensile strength and flexibility, and an inner pipe supporting means for providing support to said inner pipe, disposed between said inner pipe and said outer pipe. 4 figures.

Effect of Royal Jelly on premenstrual syndrome among Iranian medical sciences students: a randomized, triple-blind, placebo-controlled study.

PubMed

Taavoni, Simin; Barkhordari, Fatemeh; Goushegir, Ashrafeddin; Haghani, Hamid

2014-08-01

Premenstrual syndrome (PMS) may have negative effects on women's health and sometimes need therapeutic non-pharmacological management. To determine the effect of oral consumption of 1000 mg Royal Jelly capsule on premenstrual syndrome. This is a randomized, triple-blind, placebo-controlled clinical trial, which was conducted in Tehran University of Medical Sciences female dormitories between December 2011 and October 2012. The study population comprised 110 medical sciences student with PMS, whom were randomly assigned to an intervention or a control group. Each participant in the intervention group took one Royal jelly capsule orally per day, starting on the first day of menstruation and continued the same treatment daily throughout two consecutive menstrual cycles, while participants in the intervention group took placebo capsules as same method. The outcome measure in this study was PMS score as obtained through the Premenstrual Profile 2005. The mean of personal characteristics and baseline level of the premenstrual score before intervention did not differ between groups. After two consecutive months consumption of Royal Jelly, PMS score had decreased from 23.17 ± 17.43 to 11.42 ± 14.58 (mean change: 11.75; 95% confidence interval [CI]: 8.31-15.19) and in Placebo, PMS score changed from 21.48 ± 16.39 to 20.27 ± 15.76 (mean change: 1.20; 95% CI: -1.69 to 4.10). Also difference between mean changes was significant (mean difference: 10.54; 95% CI: 6.10-14.98). The results of the study have demonstrated that 2 months consumption of Royal Jelly was effective in reducing PMS. Copyright © 2014. Published by Elsevier Ltd.

Positive effect of protein-supplemented hospital food on protein intake in patients at nutritional risk: a randomised controlled trial.

PubMed

Munk, T; Beck, A M; Holst, M; Rosenbom, E; Rasmussen, H H; Nielsen, M A; Thomsen, T

2014-04-01

New evidence indicates that increased dietary protein ingestion promotes health and recovery from illness, and also maintains functionality in older adults. The present study aimed to investigate whether a novel food service concept with protein-supplementation would increase protein and energy intake in hospitalised patients at nutritional risk. A single-blinded randomised controlled trial was conducted. Eighty-four participants at nutritional risk, recruited from the departments of Oncology, Orthopaedics and Urology, were included. The intervention group (IG) received the protein-supplemented food service concept. The control group (CG) received the standard hospital menu. Primary outcome comprised the number of patients achieving ≥75% of energy and protein requirements. Secondary outcomes comprised mean energy and protein intake, body weight, handgrip strength and length of hospital stay. In IG, 76% versus 70% CG patients reached ≥75% of their energy requirements (P = 0.57); 66% IG versus 30% CG patients reached ≥75% of their protein requirements (P = 0.001). The risk ratio for achieving ≥75% of protein requirements: 2.2 (95% confidence interval = 1.3-3.7); number needed to treat = 3 (95% confidence interval = 2-6). IG had a higher mean intake of energy and protein when adjusted for body weight (CG: 82 kJ kg(-1) versus IG: 103 kJ kg(-1) , P = 0.013; CG: 0.7 g protein kg(-1) versus 0.9 g protein kg(-1) , P = 0.003). Body weight, handgrip strength and length of hospital stay did not differ between groups. The novel food service concept had a significant positive impact on overall protein intake and on weight-adjusted energy intake in hospitalised patients at nutritional risk. © 2014 The British Dietetic Association Ltd.

Nanoparticles in Polymers: Assembly, Rheology and Properties

NASA Astrophysics Data System (ADS)

Rao, Yuanqiao

Inorganic nanoparticles have the potential of providing functionalities that are difficult to realize using organic materials; and nanocomposites is an effective mean to impart processibility and construct bulk materials with breakthrough properties. The dispersion and assembly of nanoparticles are critical to both processibility and properties of the resulting product. In this talk, we will discuss several methods to control the hierarchical structure of nanoparticles in polymers and resulting rheological, mechanical and optical properties. In one example, polymer-particle interaction and secondary microstructure were designed to provide a low viscosity composition comprising exfoliated high aspect ratio clay nanoparticles; in another example, the microstructure control through templates was shown to enable unique thermal mechanical and optical properties. Jeff Munro, Stephanie Potisek, Phillip Hustad; all of the Dow Chemical Company are co-authors.

Power tong torque control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buck, D.A.; James, R.N.

1987-10-20

Torque controlled powered pipe tongs, are described the apparatus comprises: (a) a power tong powered by a fluid motor; (b) a fluid power source connected to the motor; (c) a force conducting element attached to the power tong, situated to oppose reaction torque from the tongs when torque is applied to pipe; (d) force sensing means operatively associated with the force conducting element situated to sense at least part of the force experienced by the force conducting element, arranged to produce a pressure signal proportional to force sensed; and (e) a fluid by-pass valve, adjustably biased toward a closed position,more » responsive to the signal to tend to move toward an open position, the by-pass valve connected between the fluid power source and the motor.« less

Method of measuring cross-flow vortices by use of an array of hot-film sensors

NASA Technical Reports Server (NTRS)

Agarwal, Aval K. (Inventor); Maddalon, Dal V. (Inventor); Mangalam, Siva M. (Inventor)

1993-01-01

The invention is a method for measuring the wavelength of cross-flow vortices of air flow having streamlines of flow traveling across a swept airfoil. The method comprises providing a plurality of hot-film sensors. Each hot-film sensor provides a signal which can be processed, and each hot-film sensor is spaced in a straight-line array such that the distance between successive hot-film sensors is less than the wavelength of the cross-flow vortices being measured. The method further comprises determining the direction of travel of the streamlines across the airfoil and positioning the straight-line array of hot film sensors perpendicular to the direction of travel of the streamlines, such that each sensor has a spanwise location. The method further comprises processing the signals provided by the sensors to provide root-mean-square values for each signal, plotting each root-mean-square value as a function of its spanwise location, and determining the wavelength of the cross-flow vortices by noting the distance between two maxima or two minima of root-mean-square values.

Creating Avenues for Parent Partnership (CAPP): an intervention for parents of children with epilepsy and learning problems.

PubMed

Buelow, Janice M; Johnson, Cynthia S; Perkins, Susan M; Austin, Joan K; Dunn, David W

2013-04-01

Caregivers of children with both epilepsy and learning problems need assistance to manage their child's complex medical and mental health problems. We tested the cognitive behavioral intervention "Creating Avenues for Parent Partnership" (CAPP) which was designed to help caregivers develop knowledge as well as the confidence and skills to manage their child's condition. The CAPP intervention consisted of a one-day cognitive behavioral program and three follow-up group sessions. The sample comprised 31 primary caregivers. Caregivers reported that the program was useful (mean = 3.66 on a 4-point scale), acceptable (mean = 4.28 on a 5-point scale), and "pretty easy" (mean = 1.97 on a 4-point scale). Effect sizes were small to medium in paired t tests (comparison of intervention to control) and paired analysis of key variables in the pre- and post-tests. The CAPP program shows promise in helping caregivers build skills to manage their child's condition. Copyright © 2013 Elsevier Inc. All rights reserved.

Anodal tDCS targeting the right orbitofrontal cortex enhances facial expression recognition

PubMed Central

Murphy, Jillian M.; Ridley, Nicole J.; Vercammen, Ans

2015-01-01

The orbitofrontal cortex (OFC) has been implicated in the capacity to accurately recognise facial expressions. The aim of the current study was to determine if anodal transcranial direct current stimulation (tDCS) targeting the right OFC in healthy adults would enhance facial expression recognition, compared with a sham condition. Across two counterbalanced sessions of tDCS (i.e. anodal and sham), 20 undergraduate participants (18 female) completed a facial expression labelling task comprising angry, disgusted, fearful, happy, sad and neutral expressions, and a control (social judgement) task comprising the same expressions. Responses on the labelling task were scored for accuracy, median reaction time and overall efficiency (i.e. combined accuracy and reaction time). Anodal tDCS targeting the right OFC enhanced facial expression recognition, reflected in greater efficiency and speed of recognition across emotions, relative to the sham condition. In contrast, there was no effect of tDCS to responses on the control task. This is the first study to demonstrate that anodal tDCS targeting the right OFC boosts facial expression recognition. This finding provides a solid foundation for future research to examine the efficacy of this technique as a means to treat facial expression recognition deficits, particularly in individuals with OFC damage or dysfunction. PMID:25971602

Linguistic and perceptual-motor contributions to the kinematic properties of the braille reading finger.

PubMed

Hughes, Barry; Van Gemmert, Arend W A; Stelmach, George E

2011-08-01

Recordings of the dominant finger during the reading of braille sentences by experienced readers reveal that the velocity of the finger changes frequently during the traverse of a line of text. These changes, not previously reported, involve a multitude of accelerations and decelerations, as well as reversals of direction. We investigated the origin of these velocity intermittencies (as well as movement reversals) by asking readers to twice read out-loud or silently sentences comprising high- or low-frequency words which combined to make grammatical sentences that were either meaningful or nonmeaningful. In a control condition we asked braille readers to smoothly scan lines of braille comprised of meaningless cell combinations. Word frequency and re-reading each contribute to the kinematics of finger movements, but neither sentence meaning nor the mode of reading do so. The velocity intermittencies were so pervasive that they are not easily attributable either to linguistic processing, text familiarity, mode of reading, or to sensory-motor interactions with the textured patterns of braille, but seem integral to all braille finger movements except reversals. While language-related processing can affect the finger movements, the effects are superimposed on a highly intermittent velocity profile whose origin appears to lie in the motor control of slow movements. Copyright © 2010 Elsevier B.V. All rights reserved.

Apparatus for the pulverization and burning of solid fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sayler, W.H.; White, J.C.

1988-06-07

This patent describes an apparatus for pulverizing coarsely-divided, solid fuel, such as coal, and for feeding the pulverized fuel to a burner. It comprises an upstanding housing having side, bottom and top walls; an upstanding shaft axially mounted for rotation within the housing; means for rotating the shaft; a slinger having an annular opening therethrough concentric with and closely encircling the shaft; fan means secured to the shaft immediately below the top wall of the housing; air-turbulating means comprising a pair of spiders; air-inlet means in the housing below the slinger so that air will flow upwardly through the annularmore » opening as well as peripherally of the slinger, entraining fine solid fuel particles during passage through the housing interior for further pulverization by size attrition between the spiders; outlet means provided through the side of the housing adjacent to the fan means; and outlet means being adapted for connection with the burner; and solid fuel input mans leading into the housing and positioned to feed coarsely-divided solid fuel onto the slinger.« less

Variable temperature seat climate control system

DOEpatents

Karunasiri, Tissa R.; Gallup, David F.; Noles, David R.; Gregory, Christian T.

1997-05-06

A temperature climate control system comprises a variable temperature seat, at least one heat pump, at least one heat pump temperature sensor, and a controller. Each heat pump comprises a number of Peltier thermoelectric modules for temperature conditioning the air in a main heat exchanger and a main exchanger fan for passing the conditioned air from the main exchanger to the variable temperature seat. The Peltier modules and each main fan may be manually adjusted via a control switch or a control signal. Additionally, the temperature climate control system may comprise a number of additional temperature sensors to monitor the temperature of the ambient air surrounding the occupant as well as the temperature of the conditioned air directed to the occupant. The controller is configured to automatically regulate the operation of the Peltier modules and/or each main fan according to a temperature climate control logic designed both to maximize occupant comfort during normal operation, and minimize possible equipment damage, occupant discomfort, or occupant injury in the event of a heat pump malfunction.

Nanopipette Apparatus for Manipulating Cells

NASA Technical Reports Server (NTRS)

Vilozny, Boaz (Inventor); Seger, R. Adam (Inventor); Actis, Paolo (Inventor); Pourmand, Nader (Inventor)

2017-01-01

Disclosed herein are methods and systems for controlled ejection of desired material onto surfaces including in single cells using nanopipettes, as well as ejection onto and into cells. Some embodiments are directed to a method and system comprising nanopipettes combined with an xyz controller for depositing a user defined pattern on an arbitrary substrate for the purpose of controlled cell adhesion and growth. Alternate embodiments are directed to a method and system comprising nanopipettes combined with an xyz controller and electronic control of a voltage differential in a bore of the nanopipette electroosmotically injecting material into a cell in a high-throughput manner and with minimal damage to the cell. Yet other embodiments are directed to method and system comprising functionalized nanopipettes combined with scanning ion conductance microscopy for studying molecular interactions and detection of biomolecules inside a single living cell.

Selection and deposition of nanoparticles using CO.sub.2-expanded liquids

DOEpatents

Roberts, Christopher B [Auburn, AL; McLeod, Marshall Chandler [Hillsboro, OR; Anand, Madhu [Auburn, AL

2008-06-10

A method for size selection of nanostructures comprising utilizing a gas-expanded liquids (GEL) and controlled pressure to precipitate desired size populations of nanostructures, e.g., monodisperse. The GEL can comprise CO.sub.2 antisolvent and an organic solvent. The method can be carried out in an apparatus comprising a first open vessel configured to allow movement of a liquid/particle solution to specific desired locations within the vessel, a second pressure vessel, a location controller for controlling location of the particles and solution within the first vessel, a inlet for addition of antisolvent to the first vessel, and a device for measuring the amount of antisolvent added. Also disclosed is a method for forming nanoparticle thin films comprising utilizing a GEL containing a substrate, pressurizing the solution to precipitate and deposit nanoparticles onto the substrate, removing the solvent thereby leaving a thin nanoparticle film, removing the solvent and antisolvent, and drying the film.

Selection of nanoparticles using CO.sub.2-expanded liquids

DOEpatents

Roberts, Christopher B; McLeod, Marshall Chandler; Anand, Madhu

2013-02-19

A method for size selection of nanostructures comprising utilizing a gas-expanded liquids (GEL) and controlled pressure to precipitate desired size populations of nanostructures, e.g., monodisperse. The GEL can comprise CO.sub.2 antisolvent and an organic solvent. The method can be carried out in an apparatus comprising a first open vessel configured to allow movement of a liquid/particle solution to specific desired locations within the vessel, a second pressure vessel, a location controller for controlling location of the particles and solution within the first vessel, a inlet for addition of antisolvent to the first vessel, and a device for measuring the amount of antisolvent added. Also disclosed is a method for forming nanoparticle thin films comprising utilizing a GEL containing a substrate, pressurizing the solution to precipitate and deposit nanoparticles onto the substrate, removing the solvent thereby leaving a thin nanoparticle film, removing the solvent and antisolvent, and drying the film.

Effectiveness of working memory training among children with dyscalculia: evidence for transfer effects on mathematical achievement-a pilot study.

PubMed

Layes, Smail; Lalonde, Robert; Bouakkaz, Yamina; Rebai, Mohamed

2017-12-22

We examined whether the working memory (WM) capacity of developmentally dyscalculic children can be improved by a WM training program and whether outcomes relate to mathematical performance. The experimental design comprised two groups with developmental dyslexia with grade 4 schooling: an experimental group (n = 14; mean age = 129.74 months) and a control group (n = 14; mean age = 126.9 months). All participants were assessed on measures of WM, mathematic attainment, and nonverbal mental ability (Raven test) before and after training. The WM training program focused on manipulating and maintaining arithmetic information. The results show that both WM and mathematical performances improved significantly after intervention, indicating a strong relationship between these two constructs. The control group improved slightly in Raven's progressive matrices and a reading number task. These findings are discussed in terms of near and far transfer toward trained and untrained skills and stress the positive impact of WM training on learning mathematics in children with dyscalculia.

Tube support for moisture separator reheater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabatino, R.A.

1987-08-11

In combination with a moisture separator reheater for a nuclear steam generating power plant, a reheater is described comprising: a sealed elongated substantially horizontal tubular shell member, a cycle fluid inlet passing through the shell member in predetermined position, mositure separator means positioned within the shell member proximate the bottom portion thereof, heat exchanger means comprising a plurality of elongated metallic U-shaped members disposed substantially within the shell member, a tube sheet member supporing the U-shaped tube members at one end thereof. The improvement consists of: the tube support member means proximate the U-bend portion of the U-shaped tube membersmore » each comprising an upper movable tube support member and a lower immovable tube support member, the remainder of the tube support means being immovable, the upper movable tube support member spacing and supporting the top leg portions of the U-shaped tube members, the lower immovable tube support member spacing and supporting the bottom leg portions of the U-shaped tube members, whereby the top leg portions of the U-shaped tube members proximate the U-bend are permitted to move to compensate for any increase in radius in the U-bend portion of the U-shaped tube member due to thermal expansion.« less

Electrical condition monitoring method for polymers

DOEpatents

Watkins, Jr. Kenneth S.; Morris, Shelby J.; Masakowski, Daniel D.; Wong, Ching Ping; Luo, Shijian

2010-02-16

An electrical condition monitoring method utilizes measurement of electrical resistivity of a conductive composite degradation sensor to monitor environmentally induced degradation of a polymeric product such as insulated wire and cable. The degradation sensor comprises a polymeric matrix and conductive filler. The polymeric matrix may be a polymer used in the product, or it may be a polymer with degradation properties similar to that of a polymer used in the product. The method comprises a means for communicating the resistivity to a measuring instrument and a means to correlate resistivity of the degradation sensor with environmentally induced degradation of the product.

32 CFR 179.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... remedial action is required. Munitions response area (MRA) means any area on a defense site that is known... MRA comprises one or more munitions response sites. Munitions response site (MRS) means a discrete location within an MRA that is known to require a munitions response. Operational range means a range that...

32 CFR 179.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... remedial action is required. Munitions response area (MRA) means any area on a defense site that is known... MRA comprises one or more munitions response sites. Munitions response site (MRS) means a discrete location within an MRA that is known to require a munitions response. Operational range means a range that...

32 CFR 179.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... remedial action is required. Munitions response area (MRA) means any area on a defense site that is known... MRA comprises one or more munitions response sites. Munitions response site (MRS) means a discrete location within an MRA that is known to require a munitions response. Operational range means a range that...

SOCIETAL COSTS ASSOCIATED WITH NEOVASCULAR AGE-RELATED MACULAR DEGENERATION IN THE UNITED STATES.

PubMed

Brown, Melissa M; Brown, Gary C; Lieske, Heidi B; Tran, Irwin; Turpcu, Adam; Colman, Shoshana

2016-02-01

The purpose of this study was to use a cross-sectional prevalence-based health care economic survey to ascertain the annual, incremental, societal ophthalmic costs associated with neovascular age-related macular degeneration. Consecutive patients (n = 200) with neovascular age-related macular degeneration were studied. A Control Cohort included patients with good (20/20-20/25) vision, while Study Cohort vision levels included Subcohort 1: 20/30 to 20/50, Subcohort 2: 20/60 to 20/100, Subcohort 3: 20/200 to 20/400, and Subcohort 4: 20/800 to no light perception. An interviewer-administered, standardized, written survey assessed 1) direct ophthalmic medical, 2) direct nonophthalmic medical, 3) direct nonmedical, and 4) indirect medical costs accrued due solely to neovascular age-related macular degeneration. The mean annual societal cost for the Control Cohort was $6,116 and for the Study Cohort averaged $39,910 (P < 0.001). Study Subcohort 1 costs averaged $20,339, while Subcohort 4 costs averaged $82,984. Direct ophthalmic medical costs comprised 17.9% of Study Cohort societal ophthalmic costs, versus 74.1% of Control Cohort societal ophthalmic costs (P < 0.001) and 10.4% of 20/800 to no light perception subcohort costs. Direct nonmedical costs, primarily caregiver, comprised 67.1% of Study Cohort societal ophthalmic costs, versus 21.3% ($1,302/$6,116) of Control Cohort costs (P < 0.001) and 74.1% of 20/800 to no light perception subcohort costs. Total societal ophthalmic costs associated with neovascular age-related macular degeneration dramatically increase as vision in the better-seeing eye decreases.

Quench monitoring and control system and method of operating same

DOEpatents

Ryan, David Thomas; Laskaris, Evangelos Trifon; Huang, Xianrui

2006-05-30

A rotating machine comprising a superconductive coil and a temperature sensor operable to provide a signal representative of superconductive coil temperature. The rotating machine may comprise a control system communicatively coupled to the temperature sensor. The control system may be operable to reduce electric current in the superconductive coil when a signal representative of a defined superconducting coil temperature is received from the temperature sensor.

Modular bioreactor for the remediation of liquid streams and methods for using the same

DOEpatents

Noah, Karl S.; Sayer, Raymond L.; Thompson, David N.

1998-01-01

The present invention is directed to a bioreactor system for the remediation of contaminated liquid streams. The bioreactor system is composed of at least one and often a series of sub-units referred to as bioreactor modules. The modular nature of the system allows bioreactor systems be subdivided into smaller units and transported to waste sites where they are combined to form bioreactor systems of any size. The bioreactor modules further comprises reactor fill materials in the bioreactor module that remove the contaminants from the contaminated stream. To ensure that the stream thoroughly contacts the reactor fill materials, each bioreactor module comprises means for directing the flow of the stream in a vertical direction and means for directing the flow of the stream in a horizontal direction. In a preferred embodiment, the reactor fill comprises a sulfate reducing bacteria which is particularly useful for precipitating metals from acid mine streams.

Modular bioreactor for the remediation of liquid streams and methods for using the same

DOEpatents

Noah, K.S.; Sayer, R.L.; Thompson, D.N.

1998-06-30

The present invention is directed to a bioreactor system for the remediation of contaminated liquid streams. The bioreactor system is composed of at least one and often a series of sub-units referred to as bioreactor modules. The modular nature of the system allows bioreactor systems be subdivided into smaller units and transported to waste sites where they are combined to form bioreactor systems of any size. The bioreactor modules further comprises reactor fill materials in the bioreactor module that remove the contaminants from the contaminated stream. To ensure that the stream thoroughly contacts the reactor fill materials, each bioreactor module comprises means for directing the flow of the stream in a vertical direction and means for directing the flow of the stream in a horizontal direction. In a preferred embodiment, the reactor fill comprises a sulfate reducing bacteria which is particularly useful for precipitating metals from acid mine streams. 6 figs.

No evidence of reaction time slowing in autism spectrum disorder.

PubMed

Ferraro, F Richard

2016-01-01

A total of 32 studies comprising 238 simple reaction time and choice reaction time conditions were examined in individuals with autism spectrum disorder (n = 964) and controls (n = 1032). A Brinley plot/multiple regression analysis was performed on mean reaction times, regressing autism spectrum disorder performance onto the control performance as a way to examine any generalized simple reaction time/choice reaction time slowing exhibited by the autism spectrum disorder group. The resulting regression equation was Y (autism spectrum disorder) = 0.99 × (control) + 87.93, which accounted for 92.3% of the variance. These results suggest that there are little if any simple reaction time/choice reaction time slowing in this sample of individual with autism spectrum disorder, in comparison with controls. While many cognitive and information processing domains are compromised in autism spectrum disorder, it appears that simple reaction time/choice reaction time remain relatively unaffected in autism spectrum disorder. © The Author(s) 2014.

Comparing twice- versus four-times daily insulin in mothers with gestational diabetes in Pakistan and its implications.

PubMed

Saleem, Nazish; Godman, Brian; Hussain, Shahzad

2016-08-01

Gestational diabetes mellitus is a common medical problem associated with maternal and fetal complications. Good glycemic control is the cornerstone of treatment. Compare outcomes between four times (q.i.d) and twice daily (b.i.d) regimens. The morning dose of the b.i.d regimen contained two-thirds of the total insulin, comprising a third human regular insulin and two-thirds human intermediate insulin; equal amounts in the evening. 480 women at >30 weeks with gestational diabetes mellitus with failure to control blood glucose were randomly assigned to either regimen. Mean time to the control of blood glucose was significantly less and glycemic control significantly increased with the q.i.d regimen. Operative deliveries, extent of neonatal hypoglycemia, babies with low Agpar scores and those with hyperbilirubinemia were significantly higher with the b.i.d daily regimen. The q.i.d daily regime was associated with improved fetal and maternal outcomes. Consequently should increasingly be used in Pakistan, assisted by lower acquisition costs.

Fuel cell sub-assembly

DOEpatents

Chi, Chang V.

1983-01-01

A fuel cell sub-assembly comprising a plurality of fuel cells, a first section of a cooling means disposed at an end of the assembly and means for connecting the fuel cells and first section together to form a unitary structure.

Steering mechanism for a subsoil boring apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinnan, F.R.

This paper describes a subsoil boring apparatus. It comprises: a rotatable, steerable boring assembly; motor means for producing rotary motion; pipe string means coupled to the motor means and the boring assembly to import rotation thereto; and impacting means coupled to the motor means to apply impact forces to the pipe string means to improve the steerability of the boring assembly wherein only on of the motor means and the impact means can be applied to the k pipe string means at one time.

The relationship between personality and attainment in 16-19-year-old students in a sixth form college: II: Self-perception, gender and attainment.

PubMed

Summerfield, M; Youngman, M

1999-06-01

A related paper (Summerfield & Youngman, 1999) has described the development of a scale, the Student Self-Perception Scale (SSPS) designed to explore the relationship between academic self-concept, attainment and personality in sixth form college students. The study aimed to identify groups of students exhibiting varying patterns of relationship using a range of measures including the SSPS. Issues of gender and also examined. The samples comprised a pilot sample of 152 students (aged 16-17 years from two sixth form colleges) and a main sample of 364 students (mean age, 16 yrs 10 mths range 16:0 to 18:6 years, from one sixth form college). The main sample included similar numbers of male and female students (46% male, 54% female) and ethnic minority students comprised 14% of this sample. Data comprised responses to two personality measures (the SSPS, Summerfield, 1995, and the Nowicki-Strickland Locus of Control Scale, Nowicki & Strickland, 1973), various student and tutor estimates of success, and performance data from college records. Students were classified using relocation cluster analysis and cluster differences verified using discriminant function analysis. Thirty outcome models were tested using covariance regression analysis. Eight distinct and interpretable groups, consistent with other research, were identified but the hypothesis of a positive, linear relationship between mastery and academic attainment was not sustained without qualification. Previous attainment was the major determinant of final performance. Gender variations were detected on the personality measures, particularly Confidence of outcomes, Prediction discrepancy, Passivity, Mastery, Dependency and Locus of control, and these were implicated in the cluster characteristics. The results suggest that a non-linear methodology may be required to isolate relationships between self-concept, personality and attainment, especially where gender effects may exist.

Computing an operating parameter of a unified power flow controller

DOEpatents

Wilson, David G.; Robinett, III, Rush D.

2017-12-26

A Unified Power Flow Controller described herein comprises a sensor that outputs at least one sensed condition, a processor that receives the at least one sensed condition, a memory that comprises control logic that is executable by the processor; and power electronics that comprise power storage, wherein the processor causes the power electronics to selectively cause the power storage to act as one of a power generator or a load based at least in part upon the at least one sensed condition output by the sensor and the control logic, and wherein at least one operating parameter of the power electronics is designed to facilitate maximal transmittal of electrical power generated at a variable power generation system to a grid system while meeting power constraints set forth by the electrical power grid.

Computing an operating parameter of a unified power flow controller

DOEpatents

Wilson, David G; Robinett, III, Rush D

2015-01-06

A Unified Power Flow Controller described herein comprises a sensor that outputs at least one sensed condition, a processor that receives the at least one sensed condition, a memory that comprises control logic that is executable by the processor; and power electronics that comprise power storage, wherein the processor causes the power electronics to selectively cause the power storage to act as one of a power generator or a load based at least in part upon the at least one sensed condition output by the sensor and the control logic, and wherein at least one operating parameter of the power electronics is designed to facilitate maximal transmittal of electrical power generated at a variable power generation system to a grid system while meeting power constraints set forth by the electrical power grid.

Dyslipidaemia in woman with polycystic ovarian syndrome: a case control study in tertiary care hospital of Karachi.

PubMed

Hussain, Amna; Alam, Junaid Mahmood

2014-09-01

To compare lipid profile in lean and obese women with polycystic ovary syndrome with normal weight and obese controls. The case-control study was conducted at the Department of Chemical Pathology, Liaquat National Hospital, Karachi, from March 2006 to April 2007. It comprised 50 cases of polycystic ovary syndrome along with 50 healthy controls matching for age, gender and weight. SPSS 14 was used for statistical analysis. The mean fasting levels of triglyceride and Low density lipoprotein cholesterol were considerably higher in women with polycystic ovary syndrome than those in the control group (p < 0.05), while high-density lipoprotein cholesterolwas significantly low in patients than the controls (p <0.001). Obese patients had high triglyceride value (p < 0.05). There was significant interaction between polycystic ovary syndrome, obesity and triglyceride levels (p < 0.05). Polycystic ovary syndrome is associated with a more pronounced atherogenic lipid profile. Lipid parameters were adversely affected in a subgroup that was obese. As such, women with polycystic ovary syndrome are at high risk of developing cardiovascular disease due to the presence of dyslipidaemia.

Tunnel junction multiple wavelength light-emitting diodes

DOEpatents

Olson, Jerry M.; Kurtz, Sarah R.

1992-01-01

A multiple wavelength LED having a monolithic cascade cell structure comprising at least two p-n junctions, wherein each of said at least two p-n junctions have substantially different band gaps, and electrical connector means by which said at least two p-n junctions may be collectively energized; and wherein said diode comprises a tunnel junction or interconnect.

Compact imaging spectrometer utilizing immersed gratings

DOEpatents

Lerner, Scott A.

2005-12-20

A compact imaging spectrometer comprising an entrance slit for directing light, lens means for receiving the light, refracting the light, and focusing the light; an immersed diffraction grating that receives the light from the lens means and defracts the light, the immersed diffraction grating directing the detracted light back to the lens means; and a detector that receives the light from the lens means.

SPARK GAP SWITCH

DOEpatents

Neal, R.B.

1957-12-17

An improved triggered spark gap switch is described, capable of precisely controllable firing time while switching very large amounts of power. The invention in general comprises three electrodes adjustably spaced and adapted to have a large potential impressed between the outer electrodes. The central electrode includes two separate elements electrically connected togetaer and spaced apart to define a pair of spark gaps between the end electrodes. Means are provided to cause the gas flow in the switch to pass towards the central electrode, through a passage in each separate element, and out an exit disposed between the two separate central electrode elements in order to withdraw ions from the spark gap.

High-Selectivity Electrochemical Conversion of CO 2 to Ethanol using a Copper Nanoparticle/N-Doped Graphene Electrode

DOE PAGES

Song, Yang; Peng, Rui; Hensley, Dale K.; ...

2016-09-28

Carbon dioxide is a pollutant, but also a potential carbon source provided an efficient means to convert it to useful products. Herein we report a nanostructured catalyst for the direct electrochemical reduction of dissolved CO 2 to ethanol with high Faradaic efficiency (63%) and high selectivity (84%). The catalyst is comprised of Cu nanoparticle on a highly textured, N-doped graphene film. Detailed electrochemical analysis and complementary DFT calculations indicate a novel mechanism in which multiple active sites, working sequentially, control the coupling of carbon monoxide radicals and mediate the subsequent electrochemical reduction to alcohol.

Activated carbon fiber composite material and method of making

DOEpatents

Burchell, Timothy D.; Weaver, Charles E.; Chilcoat, Bill R.; Derbyshire, Frank; Jagtoyen, Marit

2000-01-01

An activated carbon fiber composite for separation and purification, or catalytic processing of fluids is described. The activated composite comprises carbon fibers rigidly bonded to form an open, permeable, rigid monolith capable of being formed to near-net-shape. Separation and purification of gases are effected by means of a controlled pore structure that is developed in the carbon fibers contained in the composite. The open, permeable structure allows the free flow of gases through the monolith accompanied by high rates of adsorption. By modification of the pore structure and bulk density the composite can be rendered suitable for applications such as gas storage, catalysis, and liquid phase processing.

Activated carbon fiber composite material and method of making

DOEpatents

Burchell, Timothy D.; Weaver, Charles E.; Chilcoat, Bill R.; Derbyshire, Frank; Jagtoyen, Marit

2001-01-01

An activated carbon fiber composite for separation and purification, or catalytic processing of fluids is described. The activated composite comprises carbon fibers rigidly bonded to form an open, permeable, rigid monolith capable of being formed to near-net-shape. Separation and purification of gases are effected by means of a controlled pore structure that is developed in the carbon fibers contained in the composite. The open, permeable structure allows the free flow of gases through the monolith accompanied by high rates of adsorption. By modification of the pore structure and bulk density the composite can be rendered suitable for applications such as gas storage, catalysis, and liquid phase processing.

High throughput chemical munitions treatment system

DOEpatents

Haroldsen, Brent L [Manteca, CA; Stofleth, Jerome H [Albuquerque, NM; Didlake, Jr., John E.; Wu, Benjamin C-P [San Ramon, CA

2011-11-01

A new High-Throughput Explosive Destruction System is disclosed. The new system is comprised of two side-by-side detonation containment vessels each comprising first and second halves that feed into a single agent treatment vessel. Both detonation containment vessels further comprise a surrounding ventilation facility. Moreover, the detonation containment vessels are designed to separate into two half-shells, wherein one shell can be moved axially away from the fixed, second half for ease of access and loading. The vessels are closed by means of a surrounding, clam-shell type locking seal mechanisms.

Acute and chronic hypothyroidism are associated with similar left ventricular diastolic dysfunction relative to the euthyroid state: results of doppler echocardiographic comparisons.

PubMed

Gauna, A; Messuti, H; Papadopulos, G; Benchuga, G; Viale, F; Marlowe, R J; Silva Croome, M C

2011-10-01

How the duration of hypothyroidism affects left ventricular diastolic function is not well-characterized. We sought to compare left ventricular diastolic function in acutely vs chronically hypothyroid patients vs euthyroid controls, and within individuals while on vs off T4. We prospectively performed such comparisons measuring pulsed-wave and color M-mode Doppler echocardiographic variables: early or late mitral peak velocities (E wave or A wave, respectively), E wave/A wave ratio, E wave deceleration time, isovolumic relaxation time (IVRT), mitral flow propagation velocity (Vp), E wave/Vp ratio. Subjects comprised the acute HYPO group, 10 patients undergoing T4 withdrawal ≥ 6 months post-primary treatment for differentiated thyroid cancer (DTC); the chronic HYPO group, 23 treatment-naïve Hashimoto thyroiditis patients; and 21 healthy euthyroid controls. Subjects were adults aged ≤ 60 yr, predominantly female, with sinus rhythm; exclusion criteria were cardiovascular or thyroid disorder besides DTC (Hashimoto thyroiditis) in acute (chronic) HYPO patients or medication (besides thyroid hormone) affecting cardiac or thyroid function. Mean IVRT was significantly delayed and mean Vp, significantly slowed in both HYPO groups vs controls (p<0.0005), but did not differ between HYPO groups. These variables also were significantly impaired (p<0.05) within individuals when off vs on T4 (no.=8 acute, 10 chronic HYPO patients). Both HYPO groups had elevated mean E wave/Vp ratios vs controls, but the elevation reached significance (p<0.05) only in the larger chronic HYPO group. Left ventricular diastolic dysfunction is largely similar in acutely or chronically hypothyroid patients off T4 vs healthy controls or the same patients on T4.

[Evaluation of visual functions in elderly patients with femoral neck fracture].

PubMed

Oner, Mithat; Oner, Ayşe; Güney, Ahmet; Halici, Mehmet; Arda, Hatice; Bilal, Okkeş

2009-01-01

We aimed at assessing the visual functions in elderly patients with femoral neck fracture and to compare the results with age-matched controls in this three-year prospective study. Seventy-one patients with a history of fall related hip fracture (39 females, 32 males; mean age 76.3+/-9.7 years; range 64 to 90 years) and who were diagnosed with femoral neck fracture after direct graphy were treated by means of bipolar partial prosthesis and they were contacted postoperatively or prior to discharge to participate in the study. Visual acuity, depth perception, the presence of cataract in the red reflex were evaluated. A dilated fundus and slit-lamp examination were performed if possible. On completion of the examination, the ophthalmologist documented the causes of any visual impairment found. Control group was comprised of age-matched 40 subjects (22 females, 18 males; mean age 73.2+/-7.6 years; range 62 to 90 years) who applied to ophtalmology clinic for routine examination. The visual acuity was significantly decreased in the patient group as was stereopsis (p<0.05). We found no difference between the study group and the controls when we evaluate the distribution of self reported eye disease and eye disease found on ocular examination. The rate of cases who reported not usually wearing glasses was 35% while it was 5% in the control group. When we evaluate the time since last examination, 38% of cases had not had an eye examination for over four years, as compared with 22.5% of controls. This study shows that elderly people should have their eyes tested at least once every two years, refractive errors should be corrected and eye diseases should be treated to decrease the risk of fall-related femoral neck fractures.

12 CFR 219.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to a customer's relationship with the financial institution. Government authority means any agency or... this subpart, the following definitions shall apply: Customer means any person or authorized.... Customer does not include corporations or partnerships comprised of more than five persons. Financial...

40 CFR 63.1402 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... properties may vary with time. For a unit operation operated in a batch mode (i.e., batch unit operation... means a unit operation operated in a batch mode. Block means the time period that comprises a single batch cycle. Combustion device burner means a device designed to mix and ignite fuel and air to provide...

40 CFR 63.1402 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... properties may vary with time. For a unit operation operated in a batch mode (i.e., batch unit operation... means a unit operation operated in a batch mode. Block means the time period that comprises a single batch cycle. Combustion device burner means a device designed to mix and ignite fuel and air to provide...

40 CFR 63.1402 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... properties may vary with time. For a unit operation operated in a batch mode (i.e., batch unit operation... means a unit operation operated in a batch mode. Block means the time period that comprises a single batch cycle. Combustion device burner means a device designed to mix and ignite fuel and air to provide...

40 CFR 63.1402 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... properties may vary with time. For a unit operation operated in a batch mode (i.e., batch unit operation... means a unit operation operated in a batch mode. Block means the time period that comprises a single batch cycle. Combustion device burner means a device designed to mix and ignite fuel and air to provide...

40 CFR 63.1402 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... properties may vary with time. For a unit operation operated in a batch mode (i.e., batch unit operation... means a unit operation operated in a batch mode. Block means the time period that comprises a single batch cycle. Combustion device burner means a device designed to mix and ignite fuel and air to provide...

Direct condensation refrigerant recovery and restoration system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant, D.C.H.

1992-03-10

This patent describes a refrigerant recovery and purification system for removing gaseous refrigerant from a disabled refrigeration unit, cleaning the refrigerant of contaminants, and converting the gaseous refrigerant to a liquid state for storage. It comprises a low pressure inlet section; a high pressure storage section; the low pressure inlet section comprising: an oil and refrigerant gas separator, including a separated oil removal means, first conduit means for connecting an inlet of the separator to the disabled refrigerant unit, a slack-sided accumulator, second conduit means connecting the separator to the slack-sided accumulator, a reclaim condenser, third conduit means connecting themore » separator and the reclaim condenser in series, an evaporator coil in the reclaim condenser connectable to a conventional operating refrigeration system for receiving a liquid refrigerant under pressure for expansion therein, the evaporator coil forming a condensing surface for condensing the refrigerant gas at near atmospheric pressure in the condenser, a liquid receiver, a reclaimed refrigerant storage tank, fourth conduit means further connecting the liquid receiver in series with the reclaim condenser, downstream thereof, means between the reclaim condenser and the liquid receiver.« less

Preamble

NASA Astrophysics Data System (ADS)

Schmid, Hans

2015-03-01

What does the word "multiferroic" mean? When coining the term in 1994, this was done without ulterior motives, simply by enjoying the beauty of symmetries, permitting the cohabitation of two or all three primary ferroic properties, ferroelectric, ferromagnetic, and ferroelastic in the same phase, all forming domains and hysteresis loops, heralding intricate coupling properties. In this definition, the very cradle of "multiferroics" lies in Kêitsiro Aizu's colossal work of 1970, in which he gave all the 773 high-temperature (prototypic) phase/low-temperature (ferroic) phase point group pairs ("species") occurring due to phase transitions, with indication of the number of domain states, comprising all possible single-phase multiferroic combinations, including implicitly also antiferromagnetic and co-elastic ferroic phases. The original meaning of the word "multiferroic" has undergone a tacit, more realistic mutation. In its current usage, it designates all kinds of magnetic ferroelectrics, including hetero-phase systems, but with a mainstream trend in electric-field control of ferromagnetism and in all sorts of magnetoelectric interactions.

Method for the determination of lignin content of a sample by flash pyrolysis in an atmosphere of hydrogen or helium and method therefor

NASA Technical Reports Server (NTRS)

Shakkottai, Parthasarathy (Inventor); Kwack, Eug Y. (Inventor); Lawson, Daniel D. (Inventor)

1991-01-01

The lignin content of wood, paper pulp or other material containing lignin (such as filter paper soaked in black liquor) is more readily determined by flash pyrolysis of the sample at approximately 550.degree. C. in a reducing atmosphere of hydrogen or in an inert atmosphere of helium followed by a rapid analysis of the product gas by a mass spectrometer. The heated pyrolysis unit as fabricated comprises a small platinum cup welded to an electrically-heated stainless steel ribbon with control means for programmed short duration (1.5 sec, approximately) heating and means for continuous flow of hydrogen or helium. The pyrolysis products enter an electron-ionization mode mass spectrometer for spectral evaluation. Lignin content is obtained from certain ratios of integrated ion currents of many mass spectral lines, the ratios being linearly related to the Kappa number of Klason lignin.

Legislative coalitions with incomplete information

PubMed Central

Dragu, Tiberiu; Laver, Michael

2017-01-01

In most parliamentary democracies, proportional representation electoral rules mean that no single party controls a majority of seats in the legislature. This in turn means that the formation of majority legislative coalitions in such settings is of critical political importance. Conventional approaches to modeling the formation of such legislative coalitions typically make the “common knowledge” assumption that the preferences of all politicians are public information. In this paper, we develop a theoretical framework to investigate which legislative coalitions form when politicians’ policy preferences are private information, not known with certainty by the other politicians with whom they are negotiating over what policies to implement. The model we develop has distinctive implications. It suggests that legislative coalitions should typically be either of the center left or the center right. In other words our model, distinctively, predicts only center-left or center-right policy coalitions, not coalitions comprising the median party plus parties both to its left and to its right. PMID:28242675

Legislative coalitions with incomplete information.

PubMed

Dragu, Tiberiu; Laver, Michael

2017-03-14

In most parliamentary democracies, proportional representation electoral rules mean that no single party controls a majority of seats in the legislature. This in turn means that the formation of majority legislative coalitions in such settings is of critical political importance. Conventional approaches to modeling the formation of such legislative coalitions typically make the "common knowledge" assumption that the preferences of all politicians are public information. In this paper, we develop a theoretical framework to investigate which legislative coalitions form when politicians' policy preferences are private information, not known with certainty by the other politicians with whom they are negotiating over what policies to implement. The model we develop has distinctive implications. It suggests that legislative coalitions should typically be either of the center left or the center right. In other words our model, distinctively, predicts only center-left or center-right policy coalitions, not coalitions comprising the median party plus parties both to its left and to its right.

Subcutaneous morphine infusion by syringe driver for terminally ill patients.

PubMed

Cools, H J; Berkhout, A M; De Bock, G H

1996-05-01

The study aimed to find whether subcutaneous morphine administration by syringe driver for terminally ill patients in a Dutch nursing home led to higher morphine doses and earlier death than routine morphine administration. The data comprised the files of all patients dying over a 2 year period in a 355-bed nursing home in Delft in the Netherlands. Thirty-eight per cent of the patients had been given morphine, 29% by continuous subcutaneous syringe driver. In comparing the patients given morphine with and without a syringe driver no differences emerged in mean age, sex, length of admission, type of ward, diagnosis, duration of morphine administration and mean dose. The data indicate that subcutaneous morphine administration by syringe driver decreases dose frequency problems and improves the control of pain and other symptoms in the last week before death. There was no evidence that administration of morphine in this way shortens survival.

'Kiss, cuddle, squeeze': the experiences and meaning of touch among parents of children with autism attending a Touch Therapy Programme.

PubMed

Cullen, Lesley; Barlow, Julie

2002-09-01

The aim of this qualitative study was to explore the experiences and meaning of touch between parents and children with autism before and after attending a Touch Therapy Programme. The sample comprised 12 parents (1 father and 11 mothers) of children (1 female and 11 male) with autism. Parents were interviewed before and immediately after the 8-week programme. Pre-programme results suggested that children were controlling the experience of touch. Parents felt 'hurt' in response to the 'aloof nature of autism, and natural parenting instincts (e.g. spontaneous cuddles) were restricted. Post-programme results suggested that children appeared to tolerate touch. Parents reported that routine tasks (e.g. dressing) were accomplished more easily and that children appeared generally more relaxed. Parents reported feeling 'closer' to their children and felt that the touch therapy had opened a communication channel between themselves and their children.

Process Control for Precipitation Prevention in Space Water Recovery Systems

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam; Callahan, Michael R.; Muirhead, Dean

2015-01-01

The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, rotary distillation systems have been actively pursued by NASA as one of the technologies for water recovery from wastewater primarily comprised of human urine. A specific area of interest is the prevention of the formation of solids that could clog fluid lines and damage rotating equipment. To mitigate the formation of solids, operational constraints are in place that limits such that the concentration of key precipitating ions in the wastewater brine are below the theoretical threshold. This control in effected by limiting the amount of water recovered such that the risk of reaching the precipitation threshold is within acceptable limits. The water recovery limit is based on an empirically derived worst case wastewater composition. During the batch process, water recovery is estimated by monitoring the throughput of the system. NASA Johnson Space Center is working on means of enhancing the process controls to increase water recovery. Options include more precise prediction of the precipitation threshold. To this end, JSC is developing a means of more accurately measuring the constituent of the brine and/or wastewater. Another means would be to more accurately monitor the throughput of the system. In spring of 2015, testing will be performed to test strategies for optimizing water recovery without increasing the risk of solids formation in the brine.

Electrically heated particulate filter with reduced stress

DOEpatents

Gonze, Eugene V.

2013-03-05

A system comprises a particulate matter (PM) filter comprising an inlet for receiving exhaust gas. A zoned heater is arranged in the inlet and comprises a resistive heater comprising N zones, where N is an integer greater than one. Each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates others of the N zones.

Experimental investigation of high-incidence delta-wing flow control

NASA Astrophysics Data System (ADS)

Buzica, Andrei; Bartasevicius, Julius; Breitsamter, Christian

2017-09-01

The possibility of extending the flight envelope for configurations with slender delta-shaped wings is investigated in this study by means of active flow control through pulsating jets from slot pairs distributed along the leading edge. The experiments comprise stereoscopic particle image velocimetry as well as force and moment measurements on a half-delta wing model. The analysis focuses on three high-incidence regimes: pre-stall, stall, and post-stall. This study also compares different perturbation methods: blowing with spatially constant and variable parameters, frequency and phase. At an incidence of 45°, the unison pulsed blowing facilitates the most significant flow transformation. Here, the separated shear layer reattaches on the wing's suction side, thus increasing the lift. Phase-averaged flow field measurements describe, in this particular case, the underlying physics of the flow-disturbance interaction.

Sailing Uncharted Waters: Adolescent Personality Development and Social Relationship Experiences During a Year Abroad.

PubMed

Greischel, Henriette; Noack, Peter; Neyer, Franz J

2016-11-01

How does spending a year abroad influence the personality and relationship development of adolescents? This question was studied using a prospective control group design comprising 457 sojourners (high school exchange students) and 284 control participants (German adolescents; 73.3 % female; mean age = 15.63, SD = 0.78), all of whom were assessed three times across one academic year. Sojourners demonstrated higher pre-departure levels of Extraversion and Agreeableness as well as lower levels of Neuroticism. Longitudinal results indicated a steeper increase in Openness and Agreeableness trajectories, as well as a buffered increase in Neuroticism for exchange students. As expected, sojourners' social relationships showed high fluctuation, which partially mediated sojourn effects on personality development. The role of international youth mobility for personal and social development in adolescence is discussed.

NEUTRONIC REACTOR

DOEpatents

Hurwitz, H. Jr.; Brooks, H.; Mannal, C.; Payne, J.H.; Luebke, E.A.

1959-03-24

A reactor of the heterogeneous, liquid cooled type is described. This reactor is comprised of a central region of a plurality of vertically disposed elongated tubes surrounded by a region of moderator material. The central region is comprised of a central core surrounded by a reflector region which is surrounded by a fast neutron absorber region, which in turn is surrounded by a slow neutron absorber region. Liquid sodium is used as the primary coolant and circulates through the core which contains the fuel elements. Control of the reactor is accomplished by varying the ability of the reflector region to reflect neutrons back into the core of the reactor. For this purpose the reflector is comprised of moderator and control elements having varying effects on reactivity, the control elements being arranged and actuated by groups to give regulation, shim, and safety control.

Microfabricated field calibration assembly for analytical instruments

DOEpatents

Robinson, Alex L [Albuquerque, NM; Manginell, Ronald P [Albuquerque, NM; Moorman, Matthew W [Albuquerque, NM; Rodacy, Philip J [Albuquerque, NM; Simonson, Robert J [Cedar Crest, NM

2011-03-29

A microfabricated field calibration assembly for use in calibrating analytical instruments and sensor systems. The assembly comprises a circuit board comprising one or more resistively heatable microbridge elements, an interface device that enables addressable heating of the microbridge elements, and, in some embodiments, a means for positioning the circuit board within an inlet structure of an analytical instrument or sensor system.

Tunnel junction multiple wavelength light-emitting diodes

DOEpatents

Olson, J.M.; Kurtz, S.R.

1992-11-24

A multiple wavelength LED having a monolithic cascade cell structure comprising at least two p-n junctions, wherein each of said at least two p-n junctions have substantially different band gaps, and electrical connector means by which said at least two p-n junctions may be collectively energized; and wherein said diode comprises a tunnel junction or interconnect. 5 figs.

Five-week sensory motor training program improves functional performance and postural control in young male soccer players - A blind randomized clinical trial.

PubMed

Heleno, Lucas Rafael; da Silva, Rubens A; Shigaki, Leonardo; Araújo, Cynthia Gobbi Alves; Coelho Candido, Cristiane Regina; Okazaki, Victor Hugo Alves; Frisseli, Ariobaldo; Macedo, Christiane de S Guerino

2016-11-01

Sensory motor training programs are used in the rehabilitation and prevention of injuries among soccer players. Inconsistencies are found in the literature regarding the duration of the protocols and the exercises and equipment used. To evaluate the benefits of a five-week sensory motor training program on the functional performance and postural control of young soccer players. The study sample comprised 22 young male soccer players who were evaluated using: the Figure-of-Eight Test (F8), Side Hop Test (SHT), Star Excursion Balance Test (SEBT), and a force platform. The players were randomly divided into a control group (N = 10), who continued their soccer practice sessions and an intervention group (N = 12), who continued their soccer practice sessions and were also enrolled in a supervised five-week sensory motor training program. After the five-week training program, the intervention group obtained significant results in the F8, SHT and SEBT, as well as in the following parameters: area of pressure of sway center (COP), mean velocity and mean frequency of COP. The five-week sensory motor training program, carried out with easily available and low cost equipment, was effective at improving functional performance and postural control in young soccer players. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reliable fuzzy H∞ control for active suspension of in-wheel motor driven electric vehicles with dynamic damping

NASA Astrophysics Data System (ADS)

Shao, Xinxin; Naghdy, Fazel; Du, Haiping

2017-03-01

A fault-tolerant fuzzy H∞ control design approach for active suspension of in-wheel motor driven electric vehicles in the presence of sprung mass variation, actuator faults and control input constraints is proposed. The controller is designed based on the quarter-car active suspension model with a dynamic-damping-in-wheel-motor-driven-system, in which the suspended motor is operated as a dynamic absorber. The Takagi-Sugeno (T-S) fuzzy model is used to model this suspension with possible sprung mass variation. The parallel-distributed compensation (PDC) scheme is deployed to derive a fault-tolerant fuzzy controller for the T-S fuzzy suspension model. In order to reduce the motor wear caused by the dynamic force transmitted to the in-wheel motor, the dynamic force is taken as an additional controlled output besides the traditional optimization objectives such as sprung mass acceleration, suspension deflection and actuator saturation. The H∞ performance of the proposed controller is derived as linear matrix inequalities (LMIs) comprising three equality constraints which are solved efficiently by means of MATLAB LMI Toolbox. The proposed controller is applied to an electric vehicle suspension and its effectiveness is demonstrated through computer simulation.

Controls on streamflow intermittence in the Colorado Front Range

NASA Astrophysics Data System (ADS)

Kampf, S. K.; Puntenney, K.; Martin, C.; Weber, R.; Gerlich, J.; Hammond, J. C.; Lefsky, M. A.

2017-12-01

Intermittent streams comprise more than 60% of the channel length in semiarid northern Colorado, yet little is known about their flow magnitude and timing. We used field surveys, stream sensors, and remote sensing to quantify spatial and temporal patterns of streamflow intermittence in the Cache la Poudre basin in 2016-2017. To evaluate potential controls on streamflow intermittence, we delineated the drainage area to each monitored point and quantified the catchment's mean precipitation, temperature, snow persistence, slope, aspect, vegetation type, soil type, and bedrock geology. During the period of study, most streams below 2500 m elevation and <550 mm mean annual precipitation were intermittent, with flow only during the early spring and summer. In these drier low elevation areas, flow duration generally increased with precipitation and snow persistence. Locally, the type of bedrock geology and location of streams relative to faults affected flow duration. Above 2500 m, nearly all streams with drainage areas >1 km2 had perennial flow, whereas nearly all streams with drainage areas <1 km2 had intermittent flow. For the high elevation intermittent streams, stream locations often differed substantially from the locations mapped in standard GIS data products. Initial analyses have identified no clearly quantifiable controls on flow duration of high elevation streams, but field observations indicate subsurface flow paths are important contributors to surface streams.

Air intake side secondary air supply system for an internal combustion engine with a duty ratio control operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawanabe, T.; Asakura, M.; Shina, T.

1987-09-01

An air intake side secondary air supply system is described for an internal combustion engine having an air intake passage with a carburetor and an exhaust passage, comprising: an air intake side secondary air supply passage communicating with the air intake passage on the downstream side of the carburetor; an open/close valve disposed in the air intake side secondary air supply passage; an oxygen concentration sensor disposed in the exhaust passage; and detection and control means for detecting whether an air-fuel ratio of mixture to be supplied to the engine is leaner or richer with respect to a target air-fuelmore » ratio through a level of an output signal of the oxygen concentration sensor and for periodically actuating the open/close valve, the detection and control means decreasing a valve open period of the open/close valve within each cyclic period by a first predetermined amount when a detected air-fuel ratio of mixture is leaner than the target air-fuel ratio and increasing the valve open period by a second predetermined amount when the detected air-fuel ratio of mixture is richer than the target air-fuel ratio. The second predetermined amount is different from the first predetermined amount.« less

Cognitive Outcomes for Extremely Preterm/Extremely Low Birth Weight Children in Kindergarten

PubMed Central

Orchinik, Leah J.; Taylor, H. Gerry; Espy, Kimberly Andrews; Minich, Nori; Klein, Nancy; Sheffield, Tiffany; Hack, Maureen

2012-01-01

Our objectives were to examine cognitive outcomes for extremely preterm/extremely low birth weight (EPT/ELBW, gestational age <28 weeks and/or birth weight <1000 g) children in kindergarten and the associations of these outcomes with neonatal factors, early childhood neurodevelopmental impairment, and socioeconomic status (SES). The sample comprised a hospital-based 2001-2003 birth cohort of 148 EPT/ELBW children (mean birth weight 818 g; mean gestational age 26 weeks) and a comparison group of 111 term-born normal birth weight (NBW) classmate controls. Controlling for background factors, the EPT/ELBW group had pervasive deficits relative to the NBW group on a comprehensive test battery, with rates of cognitive deficits that were 3 to 6 times higher in the EPT/ELBW group. Deficits on a measure of response inhibition were found in 48% versus 10%, OR (95% CI) = 7.32 (3.32, 16.16), p <.001. Deficits on measures of executive function and motor and perceptual-motor abilities were found even when controlling for acquired verbal knowledge. Neonatal risk factors, early neurodevelopmental impairment, and lower SES were associated with higher rates of deficits within the EPT/ELBW group. The findings document both global and selective cognitive deficits in EPT/ELBW children at school entry and justify efforts at early identification and intervention. PMID:21923973

High serum serotonin in sudden infant death syndrome.

PubMed

Haynes, Robin L; Frelinger, Andrew L; Giles, Emma K; Goldstein, Richard D; Tran, Hoa; Kozakewich, Harry P; Haas, Elisabeth A; Gerrits, Anja J; Mena, Othon J; Trachtenberg, Felicia L; Paterson, David S; Berry, Gerard T; Adeli, Khosrow; Kinney, Hannah C; Michelson, Alan D

2017-07-18

Sudden infant death syndrome (SIDS), the leading cause of postneonatal infant mortality, likely comprises heterogeneous disorders with the common phenotype of sudden death without explanation upon postmortem investigation. Previously, we reported that ∼40% of SIDS deaths are associated with abnormalities in serotonin (5-hydroxytryptamine, 5-HT) in regions of the brainstem critical in homeostatic regulation. Here we tested the hypothesis that SIDS is associated with an alteration in serum 5-HT levels. Serum 5-HT, adjusted for postconceptional age, was significantly elevated (95%) in SIDS infants ( n = 61) compared with autopsied controls ( n = 15) [SIDS, 177.2 ± 15.1 (mean ± SE) ng/mL versus controls, 91.1 ± 30.6 ng/mL] ( P = 0.014), as determined by ELISA. This increase was validated using high-performance liquid chromatography. Thirty-one percent (19/61) of SIDS cases had 5-HT levels greater than 2 SDs above the mean of the controls, thus defining a subset of SIDS cases with elevated 5-HT. There was no association between genotypes of the serotonin transporter promoter region polymorphism and serum 5-HT level. This study demonstrates that SIDS is associated with peripheral abnormalities in the 5-HT pathway. High serum 5-HT may serve as a potential forensic biomarker in autopsied infants with SIDS with serotonergic defects.

Tempo in electronic gaming machines affects behavior among at-risk gamblers.

PubMed

Mentzoni, Rune A; Laberg, Jon Christian; Brunborg, Geir Scott; Molde, Helge; Pallesen, Ståle

2012-09-01

Background and aims Electronic gaming machines (EGM) may be a particularly addictive form of gambling, and gambling speed is believed to contribute to the addictive potential of such machines. The aim of the current study was to generate more knowledge concerning speed as a structural characteristic in gambling, by comparing the effects of three different bet-to-outcome intervals (BOI) on gamblers bet-sizes, game evaluations and illusion of control during gambling on a computer simulated slot machine. Furthermore, we investigated whether problem gambling moderates effects of BOI on gambling behavior and cognitions. Methods 62 participants played a computerized slot machine with either fast (400 ms), medium (1700 ms) or slow (3000 ms) BOI. SOGS-R was used to measure pre-existing gambling problems. Mean bet size, game evaluations and illusion of control comprised the dependent variables. Results Gambling speed had no overall effect on either mean bet size, game evaluations or illusion of control, but in the 400 ms condition, at-risk gamblers (SOGS-R score > 0) employed higher bet sizes compared to no-risk (SOGS-R score = 0) gamblers. Conclusions The findings corroborate and elaborate on previous studies and indicate that restrictions on gambling speed may serve as a harm reducing effort for at-risk gamblers.

Compact Refractive Imaging Spectrometer Designs Utilizing Immersed Gratings

DOEpatents

Lerner, Scott A.; Bennett, Charles L.; Bixler, Jay V.; Kuzmenko, Paul J.; Lewis, Isabella T.

2005-07-26

A compact imaging spectrometer comprising an entrance slit for directing light, a first means for receiving the light and focusing the light, an immersed diffraction grating that receives the light from the first means and defracts the light, a second means for receiving the light from the immersed diffraction grating and focusing the light, and an image plane that receives the light from the second means

Investigation of Injector Slot Geometry on Curved-Diffuser Aerodynamic Performance

NASA Technical Reports Server (NTRS)

Silva, Odlanier

2004-01-01

The Compressor Branch vision is to be recognized as world-class leaders in research for fluid mechanics of compressors. Its mission is to conduct research and develop technology to advance the state of the art of compressors and transfer new technology to U.S. industries. Maintain partnerships with U.S. industries, universities, and other government organizations. Maintain a balance between customers focused and long range research. Flow control comprises enabling technologies to meet compression system performance requirements driven by emissions and fuel reduction goals (e.g., in UEET), missions (e.g., access-to-space), aerodynamically aggressive vehicle configurations (e.g., UAV and future blended wing body configurations with highly distorted inlets), and cost goals (e.g., in VAATE). The compression system requirements include increased efficiency, power-to-weight, and adaptability (i.e., robustness in terms of wide operability, distortion tolerance, and engine system health and reliability). The compressor flow control task comprises efforts to develop, demonstrate, and transfer adaptive flow control technology to industry to increase aerodynamic loading at current blade row loss levels, to enable adaptive1 y wide operability, and to develop plant models for adaptive compression systems. In this context, flow control is the controlled modification of a flow field by a deliberate means beyond the natural (uncontrolled) shaping of the solid surfaces that define the principal flow path. The objective of the compressor flow control task is to develop and apply techniques that control circulation, aerodynamic blockage, and entropy production in order to enhance the performance and operability of compression systems for advanced aero-propulsion applications. This summer I would be working with a curved-diffuser because it simulates what happens with flow in the stator blades in the compressor. With this experiment I will be doing some data analysis and parametric study of the injector slot geometries to get the best aerodynamic performance of it. This includes some data reduction, redesign and fast prototyping of the injector nozzle.

Control system and method for payload control in mobile platform cranes

DOEpatents

Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

2002-01-01

A crane control system and method provides a way to generate crane commands responsive to a desired payload motion to achieve substantially pendulation-free actual payload motion. The control system and method apply a motion compensator to maintain a payload in a defined payload configuration relative to an inertial coordinate frame. The control system and method can further comprise a pendulation damper controller to reduce an amount of pendulation between a sensed payload configuration and the defined payload configuration. The control system and method can further comprise a command shaping filter to filter out a residual payload pendulation frequency from the desired payload motion.

Radio controlled release apparatus for animal data acquisition devices

DOEpatents

Stamps, James Frederick

2000-01-01

A novel apparatus for reliably and selectively releasing a data acquisition package from an animal for recovery. The data package comprises two parts: 1) an animal data acquisition device and 2) a co-located release apparatus. One embodiment, which is useful for land animals, the release apparatus includes two major components: 1) an electronics package, comprising a receiver; a decoder comparator, having at plurality of individually selectable codes; and an actuator circuit and 2) a release device, which can be a mechanical device, which acts to release the data package from the animal. To release a data package from a particular animal, a radio transmitter sends a coded signal which is decoded to determine if the code is valid for that animal data package. Having received a valid code, the release device is activated to release the data package from the animal for subsequent recovery. A second embodiment includes floatation means and is useful for releasing animal data acquisition devices attached to sea animals. This embodiment further provides for releasing a data package underwater by employing an acoustic signal.

General purpose architecture for intelligent computer-aided training

NASA Technical Reports Server (NTRS)

Loftin, R. Bowen (Inventor); Wang, Lui (Inventor); Baffes, Paul T. (Inventor); Hua, Grace C. (Inventor)

1994-01-01

An intelligent computer-aided training system having a general modular architecture is provided for use in a wide variety of training tasks and environments. It is comprised of a user interface which permits the trainee to access the same information available in the task environment and serves as a means for the trainee to assert actions to the system; a domain expert which is sufficiently intelligent to use the same information available to the trainee and carry out the task assigned to the trainee; a training session manager for examining the assertions made by the domain expert and by the trainee for evaluating such trainee assertions and providing guidance to the trainee which are appropriate to his acquired skill level; a trainee model which contains a history of the trainee interactions with the system together with summary evaluative data; an intelligent training scenario generator for designing increasingly complex training exercises based on the current skill level contained in the trainee model and on any weaknesses or deficiencies that the trainee has exhibited in previous interactions; and a blackboard that provides a common fact base for communication between the other components of the system. Preferably, the domain expert contains a list of 'mal-rules' which typifies errors that are usually made by novice trainees. Also preferably, the training session manager comprises an intelligent error detection means and an intelligent error handling means. The present invention utilizes a rule-based language having a control structure whereby a specific message passing protocol is utilized with respect to tasks which are procedural or step-by-step in structure. The rules can be activated by the trainee in any order to reach the solution by any valid or correct path.

Electromagnetic fields produced by incubators influence heart rate variability in newborns.

PubMed

Bellieni, C V; Acampa, M; Maffei, M; Maffei, S; Perrone, S; Pinto, I; Stacchini, N; Buonocore, G

2008-07-01

Incubators are largely used to preserve preterm and sick babies from postnatal stressors, but their motors produce high electromagnetic fields (EMFs). Newborns are chronically exposed to these EMFs, but no studies about their effects on the fragile developing neonatal structure exist. To verify whether the exposure to incubator motor electric power may alter autonomous nervous system activity in newborns. Heart rate variability (HRV) of 43 newborns in incubators was studied. The study group comprised 27 newborns whose HRV was studied throughout three 5-minute periods: with incubator motor on, off, and on again, respectively. Mean HRV values obtained during each period were compared. The control group comprised 16 newborns with constantly unrecordable EMF and exposed to changes in background noise, similar to those provoked by the incubator motor. Mean (SD) total power and the high-frequency (HF) component of HRV increased significantly (from 87.1 (76.2) ms2 to 183.6 (168.5) ms2) and the mean low-frequency (LF)/HF ratio decreased significantly (from 2.0 (0.5) to 1.5 (0.6)) when the incubator motor was turned off. Basal values (HF = 107.1 (118.1) ms2 and LF/HF = 1.9 (0.6)) were restored when incubators were turned on again. The LF spectral component of HRV showed a statistically significant change only in the second phase of the experiment. Changes in background noise did not provoke any significant change in HRV. EMFs produced by incubators influence newborns' HRV, showing an influence on their autonomous nervous system. More research is needed to assess possible long-term consequences, since premature newborns may be exposed to these high EMFs for months.

System for simultaneously loading program to master computer memory devices and corresponding slave computer memory devices

NASA Technical Reports Server (NTRS)

Hall, William A. (Inventor)

1993-01-01

A bus programmable slave module card for use in a computer control system is disclosed which comprises a master computer and one or more slave computer modules interfacing by means of a bus. Each slave module includes its own microprocessor, memory, and control program for acting as a single loop controller. The slave card includes a plurality of memory means (S1, S2...) corresponding to a like plurality of memory devices (C1, C2...) in the master computer, for each slave memory means its own communication lines connectable through the bus with memory communication lines of an associated memory device in the master computer, and a one-way electronic door which is switchable to either a closed condition or a one-way open condition. With the door closed, communication lines between master computer memory (C1, C2...) and slave memory (S1, S2...) are blocked. In the one-way open condition invention, the memory communication lines or each slave memory means (S1, S2...) connect with the memory communication lines of its associated memory device (C1, C2...) in the master computer, and the memory devices (C1, C2...) of the master computer and slave card are electrically parallel such that information seen by the master's memory is also seen by the slave's memory. The slave card is also connectable to a switch for electronically removing the slave microprocessor from the system. With the master computer and the slave card in programming mode relationship, and the slave microprocessor electronically removed from the system, loading a program in the memory devices (C1, C2...) of the master accomplishes a parallel loading into the memory devices (S1, S2...) of the slave.

EEG-tomographic studies with LORETA on vigilance differences between narcolepsy patients and controls and subsequent double-blind, placebo-controlled studies with modafinil.

PubMed

Saletu, M; Anderer, P; Saletu-Zyhlarz, G M; Mandl, M; Arnold, O; Zeitlhofer, J; Saletu, B

2004-11-01

The aim of the present study was to identify brain regions associated with vigilance in untreated and modafinil-treated narcoleptic patients by means of low-resolution brain electromagnetic tomography (LORETA). 16 drug-free narcoleptics and 16 normal controls were included in the baseline investigation. Subsequently patients participated in a double-blind, placebo-controlled crossover study receiving a three-week fixed titration of modafinil (200, 300, 400 mg) and placebo. Measurements comprised LORETA, the Multiple Sleep Latency Test (MSLT) and the Epworth Sleepiness Scale (ESS) obtained before and after three weeks' therapy. Statistical overall analysis by means of the omnibus significance test demonstrated significant inter-group differences in the resting (R-EEG), but not in the vigilance-controlled recordings (V-EEG). Subsequent univariate analysis revealed a decrease in alpha-2 and beta 1-3 power in prefrontal, temporal and parietal cortices, with the right hemisphere slightly more involved in this vigilance decrement. Modafinil 400 mg/d as compared with placebo induced changes opposite to the aforementioned baseline differences (key-lock principle) with a preponderance in the left hemisphere. This increase in vigilance resulted in an improvement in the MSLT and the ESS. LORETA provided evidence of a functional deterioration of the fronto-temporo-parietal network of the right-hemispheric vigilance system in narcolepsy and a therapeutic effect of modafinil on the left hemisphere, which is less affected by the disease.

Idiom Comprehension Deficits in High-Functioning Autism Spectrum Disorder Using a Korean Autism Social Language Task.

PubMed

Lee, Seul Bee; Song, Seung Ha; Ham, Ju Hyun; Song, Dong Ho; Cheon, Keun-Ah

2015-11-01

High-functioning autism spectrum disorder (ASD) involves pragmatic impairment of language skills. Among numerous tasks for assessing pragmatic linguistic skills, idioms are important to evaluating high-functioning ASD. Nevertheless, no assessment tool has been developed with specific consideration of Korean culture. Therefore, we designed the Korean Autism Social Language Task (KASLAT) to test idiom comprehension in ASD. The aim of the current study was to introduce this novel psychological tool and evaluate idiom comprehension deficits in high-functioning ASD. The participants included 42 children, ages 6-11 years, who visited our child psychiatric clinic between April 2014 and May 2015. The ASD group comprised 16 children; the attention deficit hyperactivity disorder (ADHD) group consisted of 16 children. An additional 10 normal control children who had not been diagnosed with either disorder participated in this study. Idiom comprehension ability was assessed in these three groups using the KASLAT. Both ASD and ADHD groups had significantly lower scores on the matched and mismatched tasks, compared to the normal control children (matched tasks mean score: ASD 11.56, ADHD 11.56, normal control 14.30; mismatched tasks mean score: ASD 6.50, ADHD 4.31, normal control 11.30). However, no significant differences were found in scores of KASLAT between the ADHD and ASD groups. These findings suggest that children with ASD exhibit greater impairment in idiom comprehension, compared to normal control children. The KASLAT may be useful in evaluating idiom comprehension ability.

48 CFR 52.227-14 - Rights in Data-General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. Computer software—(1) Means (i) Computer programs that comprise a series of instructions, rules... or computer software documentation. Computer software documentation means owner's manuals, user's... medium, that explain the capabilities of the computer software or provide instructions for using the...

Method for producing smooth inner surfaces

DOEpatents

Cooper, Charles A.

2016-05-17

The invention provides a method for preparing superconducting cavities, the method comprising causing polishing media to tumble by centrifugal barrel polishing within the cavities for a time sufficient to attain a surface smoothness of less than 15 nm root mean square roughness over approximately a 1 mm.sup.2 scan area. The method also provides for a method for preparing superconducting cavities, the method comprising causing polishing media bound to a carrier to tumble within the cavities. The method also provides for a method for preparing superconducting cavities, the method comprising causing polishing media in a slurry to tumble within the cavities.

Multiple-frequency acoustic wave devices for chemical sensing and materials characterization in both gas and liquid phase

DOEpatents

Martin, S.J.; Ricco, A.J.

1993-08-10

A chemical or intrinsic physical property sensor is described comprising: (a) a substrate; (b) an interaction region of said substrate where the presence of a chemical or physical stimulus causes a detectable change in the velocity and/or an attenuation of an acoustic wave traversing said region; and (c) a plurality of paired input and output interdigitated electrodes patterned on the surface of said substrate where each of said paired electrodes has a distinct periodicity, where each of said paired electrodes is comprised of an input and an output electrode; (d) an input signal generation means for transmitting an input signal having a distinct frequency to a specified input interdigitated electrode of said plurality so that each input electrode receives a unique input signal, whereby said electrode responds to said input signal by generating an acoustic wave of a specified frequency, thus, said plurality responds by generating a plurality of acoustic waves of different frequencies; (e) an output signal receiving means for determining an acoustic wave velocity and an amplitude of said acoustic waves at several frequencies after said waves transverses said interaction region and comparing these values to an input acoustic wave velocity and an input acoustic wave amplitude to produce values for perturbations in acoustic wave velocities and for acoustic wave attenuation as a function of frequency, where said output receiving means is individually coupled to each of said output interdigitated electrode; (f) a computer means for analyzing a data stream comprising information from said output receiving means and from said input signal generation means to differentiate a specified response due to a perturbation from a subsequent specified response due to a subsequent perturbation to determine the chemical or intrinsic physical properties desired.

Bleeding and pneumonia in intensive care patients given ranitidine and sucralfate for prevention of stress ulcer: meta-analysis of randomised controlled trials

PubMed Central

Messori, A; Trippoli, S; Vaiani, M; Gorini, M; Corrado, A

2000-01-01

Objectives To determine the effectiveness of ranitidine and sucralfate in the prevention of stress ulcer in critical patients and to assess if these treatments affect the risk of nosocomial pneumonia. Design Published studies retrieved through Medline and other databases. Five meta-analyses evaluated effectiveness in terms of bleeding rates (A: ranitidine v placebo; B: sucralfate v placebo) and infectious complications in terms of incidence of nosocomial pneumonia (C: ranitidine v placebo; D: sucralfate v placebo; E: ranitidine v sucralfate). Trial quality was determined with an empirical ad hoc procedure. Main outcome measures Rates of clinically important gastrointestinal bleeding and nosocomial pneumonia (compared between the two study arms and expressed with odds ratios specific for individual studies and meta-analytic summary odds ratios). Results Meta-analysis A (five studies) comprised 398 patients; meta-analysis C (three studies) comprised 311 patients; meta-analysis D (two studies) comprised 226 patients: and meta-analysis E (eight studies) comprised 1825 patients. Meta-analysis B was not carried out as the literature search selected only one clinical trial. In meta-analysis A ranitidine was found to have the same effectiveness as placebo (odds ratio of bleeding 0.72, 95% confidence interval 0.30 to 1.70, P=0.46). In placebo controlled studies (meta-analyses C and D) ranitidine and sucralfate had no influence on the incidence of nosocomial pneumonia. In comparison with sucralfate, ranitidine significantly increased the incidence of nosocomial pneumonia (meta-analysis E: 1.35, 1.07 to 1.70, P=0.012). The mean quality score in the four analyses (on a 0 to 10 scale) ranged from 5.6 in meta-analysis E to 6.6 in meta-analysis A. Conclusions Ranitidine is ineffective in the prevention of gastrointestinal bleeding in patients in intensive care and might increase the risk of pneumonia. Studies on sucralfate do not provide conclusive results. These findings are based on small numbers of patients, and firm conclusions cannot presently be proposed. PMID:11061729

Orifice plate for controlling solids flow, methods of use thereof and articles comprising the same

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jukkola, Glen D.; Teigen, Bard C.

Disclosed herein is an orifice plate comprising one or more plates having orifices disposed therein; the orifices being operative to permit the flow of solids from a moving bed heat exchanger to a solids flow control system; where the orifice plate is downstream of a tube bundle of the moving bed heat exchanger and upstream of the solids flow control system and wherein the orifice plate is operative to evenly distribute the flow of solids in the solids flow control system.

Association of Lead Levels and Cerebral Palsy

PubMed Central

Bansal, Neha; Aggarwal, Anju; Faridi, M. M. A.; Sharma, Tusha; Baneerjee, B. D.

2017-01-01

Background: Cerebral palsy is a common motor disability in childhood. Raised lead levels affect cognition. Children with cerebral palsy may have raised lead levels, further impairing their residual cognitive motor and behavioral abilities. Environmental exposure and abnormal eating habits may lead to increased lead levels. Aims and Objectives: To measure blood lead levels in children with cerebral palsy and compare them with healthy neurologically normal children. To correlate blood lead levels with environmental factors. Material and Methods: Design: Prospective case-control study. Setting: Tertiary care hospital. Participants: Cases comprised 34 children with cerebral palsy, and controls comprised 34 neurologically normal, age- and sex-matched children. Methods: Clinical and demographic details were recorded as per proforma. Detailed environmental history was recorded to know the source of exposure to lead. These children were investigated and treated as per protocol. Venous blood was collected in ethylenediaminetetraacetic acid vials for analysis of blood lead levels. Lead levels were estimated by Schimadzu Flame AA-6800 (atomic absorption spectrophotometer). Data were analyzed using SPSS version 17. P < .05 was taken as significant. Results: Mean blood lead levels were 9.20 ± 8.31 µg/dL in cerebral palsy cases and 2.89 ± 3.04 µg/dL in their controls (P < .001). Among children with cerebral palsy, 19 (55.88%) children had blood lead levels ≥5 µg/dL. Lead levels in children with pica were 12.33 ± 10.02 µg/dL in comparison to children with no history of pica, 6.70 ± 4.60 µg/dL (P = .029). No correlation was found between hemoglobin and blood lead levels in cases and controls. Conclusion: In our study, blood lead levels are raised in children with cerebral palsy. However, further studies are required to show effects of raised levels in these children. PMID:28491920

Higher DEFB4 genomic copy number in SLE and ANCA-associated small vasculitis.

PubMed

Zhou, Xu-Jie; Cheng, Fa-Juan; Lv, Ji-Cheng; Luo, Huan; Yu, Feng; Chen, Min; Zhao, Ming-Hui; Zhang, Hong

2012-06-01

Evidence shows that defensins are involved in the pathogenesis of SLE and ANCA-associated small vasculitis (AASV). The copy number variation of DEFB4 has been proposed to be susceptible to inflammatory disorders. This study aims to investigate whether the DEFB4 genomic copy number variations associate with the susceptibility to these two autoimmune diseases. A total of 1178 Chinese people were enrolled, including panel 1 comprising 240 SLE patients and 275 matched controls, panel 2 comprising 303 SLE patients and 248 matched controls and panel 3 with 112 AASV patients. The DEFB4 copy number was typed by a paralogue ratio test (PRT), and all the subjects in panel 1 were also typed using the restriction enzyme digest variant ratio (REDVR) for validation. The results from PRT and REDVR were highly concordant (R = 0.911, P = 3.85 × 10(-199)) and allowed copy numbers to be assigned into integer classes with high confidence. Comparison of mean DEFB4 copy number revealed a small increase in cases with SLE both in Panel 1 (P = 0.063) and Panel 2 (P = 0.017). When pooling panels 1 and 2 together, the association was reinforced (P = 0.002) in SLE. Such association was also observed in AASV (P = 0.009). We found that a higher DEFB4 gene copy number was associated with both SLE and AASV.

System comprising interchangeable electronic controllers and corresponding methods

NASA Technical Reports Server (NTRS)

Steele, Glen F. (Inventor); Salazar, George A. (Inventor)

2009-01-01

A system comprising an interchangeable electronic controller is provided with programming that allows the controller to adapt a behavior that is dependent upon the particular type of function performed by a system or subsystem component. The system reconfigures the controller when the controller is moved from one group of subsystem components to another. A plurality of application programs are provided by a server from which the application program for a particular electronic controller is selected. The selection is based on criteria such as a subsystem component group identifier that identifies the particular type of function associated with the system or subsystem group of components.

Method and apparatus for measuring stress

DOEpatents

Thompson, R.B.

1983-07-28

A method and apparatus for determining stress in a material independent of micro-structural variations and anisotropies. The method comprises comparing the velocities of two horizontally polarized and horizontally propagating ultrasonic shear waves with interchanged directions of propagation and polarization. The apparatus for carrying out the method comprises periodic permanent magnet-electromagnetic acoustic transducers for generating and detecting the shear waves and means for determining the wave velocities.

Method and apparatus for measuring stress

DOEpatents

Thompson, R. Bruce

1985-06-11

A method and apparatus for determining stress in a material independent of micro-structural variations and anisotropies. The method comprises comparing the velocities of two horizontally polarized and horizontally propagating ultrasonic shear waves with interchanged directions of propagation and polarization. The apparatus for carrying out the method comprises periodic permanent magnet-electromagnetic acoustic transducers for generating and detecting the shear waves and means for determining the wave velocities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alderfer, R.R.; Futa, P.W.

This patent describes a fuel system for an engine having a filter through which fuel from a pump passes to a regulator in response to an operator input. The regulator controls the flow of fuel presented to a combustion chamber in the engine, the regulator having a feedback apparatus to provide an operator with a signal indicative of the fuel supplied to the combustion chamber. It comprises: bypass means having a housing with a chamber therein, the chamber having an entrance port connected to the pump and an exit port connected to the regulator; piston means located in the chambermore » for separating the entrance port from the exit port, the piston having a face with a projection extending therefrom; stop means located in the chamber; resilient means located is the chamber for urging the piston means toward the stop means to prevent the flow of fuel from the pump through the housing to the regulator; and indicator means having a body retained in the housing with a first end which extends through the housing into the from a full-open position at which the closed circuit is fully opened to a full-closed position at which the closed circuit is fully blocked; ratio detecting means which detects the speed reduction ratio to find if the speed reduction ratio becomes substantially 1; and valve position detecting means which detects position of the direct clutch valve to find if the direct clutch valve is moved to a slight-open position at which the closed circuit is slightly opened.« less

Substrate comprising a nanometer-scale projection array

DOEpatents

Cui, Yi; Zhu, Jia; Hsu, Ching-Mei; Connor, Stephen T; Yu, Zongfu; Fan, Shanhui; Burkhard, George

2012-11-27

A method for forming a substrate comprising nanometer-scale pillars or cones that project from the surface of the substrate is disclosed. The method enables control over physical characteristics of the projections including diameter, sidewall angle, and tip shape. The method further enables control over the arrangement of the projections including characteristics such as center-to-center spacing and separation distance.

Modular robot

DOEpatents

Ferrante, Todd A.

1997-01-01

A modular robot may comprise a main body having a structure defined by a plurality of stackable modules. The stackable modules may comprise a manifold, a valve module, and a control module. The manifold may comprise a top surface and a bottom surface having a plurality of fluid passages contained therein, at least one of the plurality of fluid passages terminating in a valve port located on the bottom surface of the manifold. The valve module is removably connected to the manifold and selectively fluidically connects the plurality of fluid passages contained in the manifold to a supply of pressurized fluid and to a vent. The control module is removably connected to the valve module and actuates the valve module to selectively control a flow of pressurized fluid through different ones of the plurality of fluid passages in the manifold. The manifold, valve module, and control module are mounted together in a sandwich-like manner and comprise a main body. A plurality of leg assemblies are removably connected to the main body and are removably fluidically connected to the fluid passages in the manifold so that each of the leg assemblies can be selectively actuated by the flow of pressurized fluid in different ones of the plurality of fluid passages in the manifold.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herber, S.; Otto, G.; Schneider, J.

The aim of this retrospective study was to determine the safety and efficacy of chemoembolization (TACE) as palliative treatment for patients with unresectable intrahepatic cholangiocarcinoma (CCA) and to compare the results with those in the literature. Fifteen patients with histology-proven CCA (5 men, 10 women) had received palliative treatment with TACE over a 6-year period. The treatment protocol comprised repeated TACE at a minimum of 8-week intervals. TACE was performed with a mixture of 10 ml Lipiodol and 10 mg mitomycin C injected into the tumor-supplying vessels. Follow-up investigations after 8-10 weeks comprised contrast-enhanced multislice spiral CT and laboratory control.more » Statistical evaluation included survival analysis using the Kaplan-Meier method. During the investigation period 58 TACEs (3.9 {+-} 3.8; 1-15) were performed in 15 patients. Mean tumor size was 10.8 {+-} 4.6 cm (range, 2.0-18.0 cm). Unifocal tumor disease was diagnosed in eight patients, and multifocal disease in seven. Mean survival was 21.1 months (95% CI, 9.4-32.5 months). At the end of the investigation period 3 patients are still alive, and 12 patients have died. The 1-, 2-, and 3-year survival rate was 51.3%, 27.5%, and 27.5% respectively. According to RECIST criteria interim best response to therapy was stable disease in 9 of 15 patients, a partial response in 1 of 15 patients, and tumor progression in 4 of 15 patients. No deaths and no acute liver failure occurred under TACE therapy. Major complications were observed in two patients, comprising anaphylactic shock owing to contrast medium administration in one and gastric ulceration due to lipiodol displacement in the second patient. These results demonstrate that TACE is a safe procedure with a moderate number of complications for patients suffering from inoperable CCA. According to recently published data on i.v. chemotherapy we suggest that TACE might be able to prolong survival in selected patients who would succumb under other palliative treatment modalities.« less

Liquid-film electron stripper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gavin, B.F.

1986-12-02

This patent describes an improved liquid-film electron stripper for high intensity heavy ion beams comprising: at least one rotatable disc mounted in a housing, means for rotating the disc, a liquid reservoir operatively connected to the housing, means for directing liquid from the reservoir onto the rotatable disc for forming a film of liquid as liquid is spun from the disc, the disc being configured to define a sharp edge located at one side of the periphery of the disc, and configured to include a flat, smooth radially outer section located adjacent the sharp edge, the liquid being directed ontomore » the flat, smooth section of the disc, the means for directing liquid onto the disc including a nozzle positioned with respect to the disc so that liquid from the nozzle impinges at about a 90/sup 0/ angle with respect to the flat, smooth surface of the disc, and liquid film terminator means located in spaced relation to the disc and approximately perpendicular to a formed liquid film, the terminator means comprising at least one ribbon of material secured to the housing.« less

Splice assembly tool and method of splicing

DOEpatents

Silva, Frank A.

1980-01-01

A splice assembly tool for assembling component parts of an electrical conductor while producing a splice connection between electrical cables therewith, comprises a first structural member adaptable for supporting force applying means thereon, said force applying means enabling a rotary force applied manually thereto to be converted to a longitudinal force for subsequent application against a first component part of said electrical connection, a second structural member adaptable for engaging a second component part in a manner to assist said first structural member in assembling the component parts relative to one another and transmission means for conveying said longitudinal force between said first and said second structural members, said first and said second structural members being coupled to one another by said transmission means, wherein at least one of said component parts comprises a tubular elastomeric sleeve and said force applying means provides a relatively high mechanical advantage when said rotary force is applied thereto so as to facilitate assembly of said at least one tubular elastomeric sleeve about said other component part in an interference fit manner.

PULSE AMPLITUDE ANALYZER

DOEpatents

Gray, G.W.; Jensen, A.S.

1957-10-22

A pulse-height analyzer system of improved design for sorting and counting a series of pulses, such as provided by a scintillation detector in nuclear radiation measurements, is described. The analyzer comprises a main transmission line, a cathode-ray tube for each section of the line with its deflection plates acting as the line capacitance; means to bias the respective cathode ray tubes so that the beam strikes a target only when a prearranged pulse amplitude is applied, with each tube progressively biased to respond to smaller amplitudes; pulse generating and counting means associated with each tube to respond when the beam is deflected; a control transmission line having the same time constant as the first line per section with pulse generating means for each tube for initiating a pulse on the second transmission line when a pulse triggers the tube of corresponding amplitude response, the former pulse acting to prevent successive tubes from responding to the pulse under test. This arrangement permits greater deflection sensitivity in the cathode ray tube and overcomes many of the disadvantages of prior art pulse-height analyzer circuits.

Selective ion source

DOEpatents

Leung, K.N.

1996-05-14

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

Selective ion source

DOEpatents

Leung, Ka-Ngo

1996-01-01

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

Spontaneous resolution of macular edema after panretinal photocoagulation in florid proliferative diabetic retinopathy.

PubMed

Gaucher, David; Fortunato, Pina; LeCleire-Collet, Amélie; Bourcier, Tristan; Speeg-Schatz, Claude; Tadayoni, Ramin; Massin, Pascale

2009-10-01

To report the evolution of diabetic macular edema (DME) after extensive panretinal photocoagulation in patients with Type 1 diabetes exhibiting florid proliferative diabetic retinopathy (FPDR). This retrospective observational case series comprised 17 eyes of 10 consecutive patients (8 women and 2 men). All patients exhibited FPDR combined with severe DME, and all underwent panretinal photocoagulation. The evolution of visual acuity and progression of FPDR were evaluated. The evolution of DME during follow-up was assessed by fluorescein angiography and repeated optical coherence tomography examinations. At baseline, all eyes had diffuse DME. Mean logMAR visual acuity was 0.402 +/- 0.46. Mean central macular thickness was 468.23 +/- 113.63 microm. After panretinal photocoagulation, DME regressed spontaneously in all eyes after a mean follow-up of 7.1 +/- 2.68 months. Mean central macular thickness decreased to 268.12 +/-54.67 microm (t-test, P < 0.0001). Mean visual acuity improved significantly to 0.184 +/- 0.12 (t-test, P = 0.048). Diabetic macular edema only recurred in two eyes. In DME combined with FPDR, extensive panretinal photocoagulation and glycemic control seem effective in reducing DME and improving vision. In FPDR, DME may be caused by excessive production of vascular endothelial growth factor by the unperfused retina.

Manual and automatic control of surface effect ships. [operator steering servomechanisms analysis

NASA Technical Reports Server (NTRS)

Clement, W. F.; Shanahan, J. J.; Allen, R. W.

1975-01-01

A recent investigation of crew performance in the motion environment of a large generic high speed surface effect ship by means of a motion base simulation addressed some of the helmsman's control task with an external forward visual field of the seascape and navigation and steering displays in the pilot house. In addition to the primary steering control task, a subcritical speed tracking task provided a secondary surrogate for trimming the water speed of the craft. The results of helsmen's steering describing function measurements are presented, and some suggestions for their interpretation are offered. The likely steering loop closures comprise heading and lateral displacement for the course keeping task investigated. Also discussed is the manner in which these loop closures were implemented for automatic steering of the surface effect ship. Regardless of the influence of workload, steering technique, water speed and sea state, the helmsmen apparently adopted a disturbance regulation bandwidth of about 0.2 rad/sec for lateral displacement.

NEUTRONIC REACTOR SYSTEM

DOEpatents

Treshow, M.

1959-02-10

A reactor system incorporating a reactor of the heterogeneous boiling water type is described. The reactor is comprised essentially of a core submerged adwater in the lower half of a pressure vessel and two distribution rings connected to a source of water are disposed within the pressure vessel above the reactor core, the lower distribution ring being submerged adjacent to the uppcr end of the reactor core and the other distribution ring being located adjacent to the top of the pressure vessel. A feed-water control valve, responsive to the steam demand of the load, is provided in the feedwater line to the distribution rings and regulates the amount of feed water flowing to each distribution ring, the proportion of water flowing to the submerged distribution ring being proportional to the steam demand of the load. This invention provides an automatic means exterior to the reactor to control the reactivity of the reactor over relatively long periods of time without relying upon movement of control rods or of other moving parts within the reactor structure.

Piezo activated mode tracking system for widely tunable mode-hop-free external cavity mid-IR semiconductor lasers

NASA Technical Reports Server (NTRS)

Tittel, Frank K. (Inventor); Curl, Robert F. (Inventor); Wysocki, Gerard (Inventor)

2010-01-01

A widely tunable, mode-hop-free semiconductor laser operating in the mid-IR comprises a QCL laser chip having an effective QCL cavity length, a diffraction grating defining a grating angle and an external cavity length with respect to said chip, and means for controlling the QCL cavity length, the external cavity length, and the grating angle. The laser of claim 1 wherein said chip may be tuned over a range of frequencies even in the absence of an anti-reflective coating. The diffraction grating is controllably pivotable and translatable relative to said chip and the effective QCL cavity length can be adjusted by varying the injection current to the chip. The laser can be used for high resolution spectroscopic applications and multi species trace-gas detection. Mode-hopping is avoided by controlling the effective QCL cavity length, the external cavity length, and the grating angle so as to replicate a virtual pivot point.

Behavioral problems in children with epilepsy in rural Kenya

PubMed Central

Kariuki, Symon M.; Abubakar, Amina; Holding, Penny A.; Mung'ala-Odera, Victor; Chengo, Eddie; Kihara, Michael; Neville, Brian G.; Newton, Charles R.J.C.

2012-01-01

The aims of this study were to record behavioral problems in children with epilepsy (CWE), compare the prevalence with that reported among healthy children without epilepsy, and investigate the risk factors. A child behavioral questionnaire for parents comprising 15 items was administered to the main caregiver of 108 CWE and 108 controls matched for age in Kilifi, Kenya. CWE had a higher mean score for reported behavioral problems than controls (6.9 vs 4.9, t = 4.7, P < 0.001). CWE with active epilepsy also recorded more behavioral problems than those with inactive epilepsy (8.2 vs 6.2, t = − 2.9, P = 0.005). A significantly greater proportion of CWE (49% vs 26% of controls) were reported to have behavioral problems. Active epilepsy, cognitive impairment, and focal seizures were the most significant independent covariates of behavioral problems. Behavioral problems in African CWE are common and need to be taken into consideration in planning comprehensive clinical services in this region. PMID:22119107

Effects of a short-term parental education program on childhood atopic dermatitis: a randomized controlled trial.

PubMed

Futamura, Masaki; Masuko, Ikuyo; Hayashi, Keiichi; Ohya, Yukihiro; Ito, Komei

2013-01-01

Parental education is important in managing childhood atopic dermatitis (AD). We evaluated the long-term effects of a 2-day parental education program (PEP) on childhood AD. In an investigator-blinded, randomized controlled trial, 59 children age 6 months to 6 years with moderate to severe AD and their mothers were recruited in Japan. Participants were given a booklet about AD and received conventional treatment alone or in combination with a 2-day PEP comprising three lectures, three practical sessions, and a group discussion. The primary outcome was evaluation of eczema severity using SCORing Atopic Dermatitis (SCORAD) at 6 months. Secondary outcomes included changes in symptom scores, amount of corticosteroid used, parental quality of life as determined according to the Dermatitis Family Impact questionnaire, and change in parental anxiety regarding the use of corticosteroids in their children. Participants in the PEP group had a significantly lower SCORAD score than those in the control group at 6 months (mean difference 10.0, 95% confidence interval [CI] = 2.3-17.7, p = 0.01) and objective SCORAD score (mean difference 7.1, 95% CI = 0.8-13.5, p = 0.03). The sleeplessness symptom score (mean difference 1.6, 95% CI = 0.0-3.1, p = 0.048) and corticosteroid anxiety score (p = 0.02) in the PEP group were significantly better than in the control group at 6 months. There was no significant difference between groups in the amount of corticosteroid used or quality of life. The PEP had positive long-term effects on eczema severity and parental anxiety about corticosteroid usage. © 2013 Wiley Periodicals, Inc.

Effects of probiotics on body weight, body mass index, fat mass and fat percentage in subjects with overweight or obesity: a systematic review and meta-analysis of randomized controlled trials.

PubMed

Borgeraas, H; Johnson, L K; Skattebu, J; Hertel, J K; Hjelmesaeth, J

2018-02-01

A systematic review and meta-analysis of randomized controlled trials was conducted to examine the effects of probiotic supplementation on body weight, body mass index (BMI), fat mass and fat percentage in subjects with overweight (BMI 25-29.9 kg m -2 ) or obesity (BMI ≥30 kg m -2 ). MEDLINE, EMBASE and the Cochrane Central Register of Controlled Trials were searched for studies published between 1946 and September 2016. A meta-analysis, using a random effects model, was performed to calculate the weighted mean difference between the intervention and control groups. Of 800 studies identified through the literature search, 15 were finally included. The studies comprised a total of 957 subjects (63% women), with the mean BMI being 27.6 kg m -2 and the duration of the interventions ranging from 3 to 12 weeks. Administration of probiotics resulted in a significantly larger reduction in body weight (weighted mean difference [95% confidence interval]; -0.60 [-1.19, -0.01] kg, I 2  = 49%), BMI (-0.27 [-0.45, -0.08] kg m -2 , I 2  = 57%) and fat percentage (-0.60 [-1.20, -0.01] %, I 2  = 19%), compared with placebo; however, the effect sizes were small. The effect of probiotics on fat mass was non-significant (-0.42 [-1.08, 0.23] kg, I 2  = 84%). © 2017 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of World Obesity Federation.

Effects of first-line anti-retroviral therapy on blood coagulation parameters of HIV-infected patients attending a tertiary hospital at Abuja, Nigeria.

PubMed

Nasir, I A; Owolagba, A; Ahmad, A E; Barma, M M; Musa Po, P O; Bakare, M; Ibrahim, Y; Amadu, D O

2016-08-01

Blood coagulation abnormalities are common in persons infected with the human immunodeficiency virus (HIV). However, few studies showed the association of these abnormalities with anti-retroviral therapy (ART). This cross-sectional study investigated the effects of ART on blood coagulation parameters of patients infected with HIV attending HIV special clinics of the University of Abuja Teaching Hospital (UATH), Gwagwalada, Abuja, Nigeria. A total of 191 patients comprising 128 HIV subjects on ART (test subjects) and 63 other HIV patients not on ART (control subjects) were included in the study. CD4+ lymphocyte counts, platelet counts, prothrombin time (PT) and partial thromboplastin time with kaolin (PTTK) of subjects were determined using flow cytometry, automated hematology analyser and Quick one-stage methods respectively. Of the total test subjects, 21 (16.4%) were CD4 lymphopaenic, and the mean CD4+ cell count for the test subjects was statistically higher than that of the control subjects (578 versus 322 cells/ mm(3)) (p = 0.014). Eight (6.3%) of test subjects had prolong PTTK, and the mean values of PT and PTTK were statistically not significant between test subjects and control subjects (p = 0.358 and p= 0.141 respectively). Eight (6.3%) of test subjects had thrombocytopaenia, the mean platelet count was significantly lower than that of the control subjects (238 versus 278.6 x 10(9)/L, p = 0.001), and also varied significantly with the duration of ART (p = 0.0086). Findings from this study revealed ART decreased platelet counts of HIV-infected individuals, but did not affect the PT and PTTK results.

Comparison of hemostatic matrix and standard hemostasis in patients undergoing primary TKA.

PubMed

Comadoll, James L; Comadoll, Shea; Hutchcraft, Audrey; Krishnan, Sangeeta; Farrell, Kelly; Kreuwel, Huub T C; Bechter, Mark

2012-06-01

Bleeding after total knee arthroplasty increases the risk of pain, delayed rehabilitation, blood transfusion, and transfusion-associated complications. The authors compared pre- and postoperative decreases in hemoglobin as a surrogate for blood loss in consecutive patients treated at a single institution by the same surgeon (J.L.C.) using conventional hemostatic methods (electrocautery, suturing, or manual compression) or a gelatin and thrombin-based hemostatic matrix during total knee arthroplasty. Data were collected retrospectively by chart review. The population comprised 165 controls and 184 patients treated with hemostatic matrix. Median age was 66 years (range, 28-89 years); 66% were women. The arithmetic mean ± SD for the maximal postoperative decrease in hemoglobin was 3.18 ± 0.94 g/dL for controls and 2.19 ± 0.83 g/dL for the hemostatic matrix group. Least squares means estimates of the group difference (controls-hemostatic matrix) in the maximal decrease in hemoglobin was 0.96 g/dL (95% confidence interval, 0.77-1.14 mg/dL; P<.0001). Statistically significant covariate effects were observed for preoperative hemoglobin level (P<.0001) and body mass index (P=.0029). Transfusions were infrequent in both groups. The frequency of acceptable range of motion was high (control, 88%; hemostatic matrix, 84%). In both groups, overall mean tourniquet time was approximately 1 hour, and the most common length of stay was 3 to 5 days. No serious complications related to the hemostatic agent were observed. These data demonstrate that the use of a flowable hemostatic matrix results in less reduction in hemoglobin than the use of conventional hemostatic methods in patient undergoing total knee arthroplasty. Copyright 2012, SLACK Incorporated.

Heart rate variability (HRV) analysis in radio and TV broadcasting stations workers.

PubMed

Bortkiewicz, Alicja; Gadzicka, Elżbieta; Szymczak, Wiesław; Zmyślony, Marek

2012-09-01

The aim of the study was to assess the mechanism of cardiovascular impairments in workers exposed to UHF-VHF radio frequency electromagnetic fields (EMF). Heart rate variability (HRV) was analysed using 512 normal heart beats registered at rest. The analysis concerned time-domain (STD R-R) and frequency-domain (VLF, LF, HF) parameters of HRV. Fifty nine workers (group I) with low-level and 12 workers (group II) with high-level exposure were examined. The mean age of the subjects was 47 ± 9 years and 41 ± 14 years, and mean exposure duration 19.1 ± 8.8 years and 13 ± 4 years, in groups I and II, respectively. The groups were divided according to: E(max), E(dose), E(mean) for frequencies UHF, VHF and UHF+VHF: The control group consisted of 42 non-exposed subjects, aged 49 ± 8 years. Statistical analysis comprised one-way analysis of variance, covariance analysis and logistic regression models. In the exposed groups, the heart rate was higher than in the control one. Standard deviation of R-R intervals (STD R-R) was found to be significantly (p = 0.0285) lower in group I (42.5 ± 24.7 ms) compared to the control group (62.9 ± 53.5 ms). The risk of lowered STD R-R was significantly increased (OR = 2.37, p = 0.023) in group II. Both exposed groups presented significantly higher VLF and LF values than the control group (p = 0.005 and p = 0.0025, respectively). The EMF-exposed groups were characterised by the dominance of the sympathetic system (LF/HF 1.3 ± 0.35). The results indicate that exposure to radiofrequency EMF may affect the neurovegetative regulation.

Hepatobiliary Ultrasonographic Abnormalities in Adult Patients with Sickle Cell Anaemia in Steady State in Ile-Ife, Nigeria.

PubMed

Oguntoye, Oluwatosin O; Ndububa, Dennis A; Yusuf, Musah; Bolarinwa, Rahman A; Ayoola, Oluwagbemiga O

2017-01-01

Sickle cell anaemia (SCA) is associated with structural manifestations in the hepatobiliary axis. This study aimed to investigate the hepatobiliary ultrasonographic abnormalities in adult patients with sickle cell anaemia in steady state attending the Haematology clinic of a federal tertiary health institution in Ile-Ife, Nigeria. Basic demographic data as well as right upper abdominal quadrant ultrasonography of 50 consecutive sickle cell anaemia patients were compared with those of 50 age- and sex-matched subjects with HbAA as controls. Each of the study groups (patients and controls) comprised of 21 (42%) males and 29 (58%) females. The age range of the patients was 18-45 years with a mean (±SD) of 27.6±7.607 years, while that of the controls was 21-43 years with a mean (±SD) of 28.0±5.079 years (p=0.746). Amongst the patients, 32 (64%) had hepatomegaly, 15 (30%) cholelithiasis and 3 (6%) biliary sludge. Fourteen (28%) of the patients had normal hepatobiliary ultrasound findings. In the control group, one (2%) person had cholelithiasis, one (2%) biliary sludge, one (2%) fatty liver and none hepatomegaly. Forty-seven (94%) of the controls had normal hepatobiliary ultrasound findings. There was a statistically significant difference in the prevalence of hepatomegaly and cholelithiasis between the patients and controls (p value <0.001 for both comparisons). In this study, hepatomegaly, cholelithiasis and biliary sludge were the most common hepatobiliary ultrasound findings in patients with sickle cell anaemia. Ultrasonography is a useful tool for assessing hepatobiliary abnormalities in patients with sickle cell anaemia.

PRESSURE SENSING DEVICE

DOEpatents

Pope, K.E.

1959-12-15

This device is primarily useful as a switch which is selectively operable to actuate in response to either absolute or differential predetermined pressures. The device generally comprises a pressure-tight housing divided by a movable impermeable diaphragm into two chambers, a reference pressure chamber and a bulb chamber containing the switching means and otherwise filled with an incompressible non-conducting fluid. The switch means comprises a normally collapsed bulb having an electrically conductive outer surface and a vent tube leading to the housing exterior. The normally collapsed bulb is disposed such that upon its inflation, respensive to air inflow from the vent, two contacts fixed within the bulb chamber are adapted to be electrically shorted by the conducting outer surface of the bulb.

Patient-related barriers to hypertension control in a Nigerian population

PubMed Central

Okwuonu, Chimezie Godswill; Ojimadu, Nnamdi Ezekiel; Okaka, Enajite Ibiene; Akemokwe, Fatai Momodu

2014-01-01

Background Hypertension control is a challenge globally. Barriers to optimal control exist at the patient, physician, and health system levels. Patient-related barriers in our environment are not clear. The aim of this study was to identify patient-related barriers to control of hypertension among adults with hypertension in a semiurban community in South-East Nigeria. Methods This was a cross-sectional descriptive study of patients with a diagnosis of hypertension and on antihypertensive medication. Results A total of 252 participants were included in the survey, and comprised 143 males (56.7%) and 109 females (43.3%). The mean age of the participants was 56.6±12.7 years, with a diagnosis of hypertension for a mean duration of 6.1±3.3 years. Among these patients, 32.9% had controlled blood pressure, while 39.3% and 27.8%, respectively, had stage 1 and stage 2 hypertension according to the Seventh Report of the Joint National Committee on Prevention, Detection and Evaluation of High Blood Pressure. Only 23.4% knew the consequences of poor blood pressure control and 64% were expecting a cure from treatment even when the cause of hypertension was not known. Furthermore, 68.7% showed low adherence to medication, the reported reasons for which included forgetfulness (61.2%), financial constraints (56.6%), high pill burden (22.5%), side effects of medication (17.3%), and low measured blood pressure (12.1%). Finally, knowledge and practice of the lifestyle modifications necessary for blood pressure control was inadequate among the participants. Conclusion Poor knowledge regarding hypertension, unrealistic expectations of treatment, poor adherence with medication, unawareness of lifestyle modification, and failure to apply these were identified as patient-related barriers to blood pressure control in this study. PMID:25061335

NMR logging apparatus

DOEpatents

Walsh, David O; Turner, Peter

2014-05-27

Technologies including NMR logging apparatus and methods are disclosed. Example NMR logging apparatus may include surface instrumentation and one or more downhole probes configured to fit within an earth borehole. The surface instrumentation may comprise a power amplifier, which may be coupled to the downhole probes via one or more transmission lines, and a controller configured to cause the power amplifier to generate a NMR activating pulse or sequence of pulses. Impedance matching means may be configured to match an output impedance of the power amplifier through a transmission line to a load impedance of a downhole probe. Methods may include deploying the various elements of disclosed NMR logging apparatus and using the apparatus to perform NMR measurements.

APPARATUS FOR CONDENSATION AND SUBLIMATION

DOEpatents

Schmidt, R.J.; Fuis, F. Jr.

1958-10-01

An apparatus is presented for the sublimation and condensation of uranium compounds in order to obtain an improved crystalline structure of this material. The apparatus comprises a vaporizing chamber and condensing structure connected thereto. There condenser is fitted with a removable liner having a demountable baffle attached to the liner by means of brackets and a removable pin. The baffle is of spiral cross-section and is provided with cooling coils disposed between the surfaces of the baffle for circulation of a temperature controlling liquid within the baffle. The cooling coll provides for controlllng the temperature of the baffle to insure formatlon of a satisfactory condensate, and the removable liner facilitates the removal of condensate formed during tbe sublimation process.

Tunable thermal link

DOEpatents

Chang, Chih-Wei; Majumdar, Arunava; Zettl, Alexander K.

2014-07-15

Disclosed is a device whereby the thermal conductance of a multiwalled nanostructure such as a multiwalled carbon nanotube (MWCNT) can be controllably and reversibly tuned by sliding one or more outer shells with respect to the inner core. As one example, the thermal conductance of an MWCNT dropped to 15% of the original value after extending the length of the MWCNT by 190 nm. The thermal conductivity returned when the tube was contracted. The device may comprise numbers of multiwalled nanotubes or other graphitic layers connected to a heat source and a heat drain and various means for tuning the overall thermal conductance for applications in structure heat management, heat flow in nanoscale or microscale devices and thermal logic devices.

FLUID CONTACTOR APPARATUS

DOEpatents

Spence, R.; Streeton, R.J.W.

1956-04-17

The fluid contactor apparatus comprises a cylindrical column mounted co- axially and adapted to rotate within a cylindrical vessel, for the purpose of extracting a solute from am aqueous solution by means of an organic solvent. The column is particularly designed to control the vortex pattern so as to reduce the height of the vortices while, at the same time, the width of the annular radius in the radial direction between the vessel and column is less than half the radius of the column. A plurality of thin annular fins are spaced apart along the rotor approximately twice the radial dimension of the column such that two contrarotating substantially circular vortices are contained within each pair of fins as the column is rotated.

Ultra-accelerated natural sunlight exposure testing facilities

DOEpatents

Lewandowski, Allan A.; Jorgensen, Gary J.

2003-08-12

A multi-faceted concentrator apparatus for providing ultra-accelerated natural sunlight exposure testing for sample materials under controlled weathering conditions comprising: facets that receive incident natural sunlight, transmits VIS/NIR and reflects UV/VIS to deliver a uniform flux of UV/VIS onto a sample exposure plane located near a center of a facet array in chamber means that provide concurrent levels of temperature and/or relative humidity at high levels of up to 100.times. of natural sunlight that allow sample materials to be subjected to accelerated irradiance exposure factors for a significant period of time of about 3 to 10 days to provide a corresponding time of about at least a years worth representative weathering of sample materials.

Biocentrifuge system capable of exchanging specimen cages while in operational mode

NASA Technical Reports Server (NTRS)

Belew, R. R. (Inventor)

1981-01-01

The centrifuge comprises a generally circular, rotatably mounted frame carrying a plurality of removable and replaceable cages for the animal specimens. Pairs of opposing cages may be removed from the frame while it is rotating by means of a cage exchanger which rotates concentrically within the centrifuge and the speed of which is controlled independently of the frame speed. An image rotator is provided for selective observation of the rotating animals. The system further includes a waste conveyor system, a food supply system, and a water supply system for each cage for creating a life sustaining environment so that the animals can live in the rotating centrifuge for extended periods.

The Relationship Between Emotional Intelligence and Leader Performance

DTIC Science & Technology

2002-03-01

independence, and self-actualization), (2) Interpersonal EQ (comprising empathy, social responsibility, and interpersonal relationships), (3) Stress ...management EQ (comprising stress tolerance and impulse control), (4) Adaptability EQ (comprising reality testing, flexibility, and problem solving), and (5...explain the significance of the model or its particular sub- scales or categories. Thus, mixed models, and the claims associated with them have been

Noise screen for attitude control system

NASA Technical Reports Server (NTRS)

Rodden, John J. (Inventor); Stevens, Homer D. (Inventor); Hong, David P. (Inventor); Hirschberg, Philip C. (Inventor)

2002-01-01

An attitude control system comprising a controller and a noise screen device coupled to the controller. The controller is adapted to control an attitude of a vehicle carrying an actuator system that is adapted to pulse in metered bursts in order to generate a control torque to control the attitude of the vehicle in response to a control pulse. The noise screen device is adapted to generate a noise screen signal in response to the control pulse that is generated when an input attitude error signal exceeds a predetermined deadband attitude level. The noise screen signal comprises a decaying offset signal that when combined with the attitude error input signal results in a net attitude error input signal away from the predetermined deadband level to reduce further control pulse generation.

High-speed electromechanical chutter for imaging spectrographs

NASA Technical Reports Server (NTRS)

Nguyen, Quang-Viet (Inventor)

2005-01-01

The present invention presents a high-speed electromechanical shutter which has at least two rotary beam choppers that are synchronized using a phase-locked loop electronic control to reduce the duty cycle. These choppers have blade means that can comprise discs or drums, each having about 60 (+/- 15) slots which are from about 0.3 to about 0.8 mm wide and about 5 to about 20 nun long (radially) which are evenly distributed through out 360 deg, and a third rotary chopper which is optically aligned has a small number of slots, such as for example, 1 to 10 slots which are about 1 to about 2 mm wide and about 5 to about 20 mm long (radially). Further the blade means include phase slots that allow the blade means to be phase locked using a closed loop control circuit. In addition, in a preferred embodiment, the system also has a leaf shutter. Thus the invention preferably achieves a gate width of less than about 100 microseconds, using motors that operate at 3000 to 10,OOO rpm, and with a phase jitter of less than about 1.5 microseconds, and further using an aperture with more than about 75% optical transmission with a clear aperture of about 0.8 -10 nun. The system can be synchronized to external sources at 0 6 kHz lasers, data acquisition systems, and cameras.

High-speed electromechanical shutter for imaging spectrographs

NASA Technical Reports Server (NTRS)

Nguyen, Quang-Viet (Inventor)

2005-01-01

The present invention presents a high-speed electromechanical shutter which has at least two rotary beam choppers that are synchronized using a phase-locked loop electronic control to reduce the duty cycle. These choppers have blade means that can comprise discs or drums, each having about 60 (+/-15) slots which are from about 0.3 to about 0.8 mm wide and about 5 to about 20 mm long (radially) which are evenly distributed through out 360?, and a third rotary chopper which is optically aligned has a small number of slots, such as for example, 1 to 10 slots which are about 1 to about 2 mm wide and about 5 to about 20 mm long (radially). Further the blade means include phase slots that allow the blade means to be phase locked using a closed loop control circuit. In addition, in a preferred embodiment, the system also has a leaf shutter. Thus the invention preferably achieves a gate width of less than about 100 microseconds, using motors that operate at 3000 to 10,000 rpm, and with a phase jitter of less than about 1.5 microseconds, and further using an aperture with more than about 75% optical transmission with a clear aperture of about 0.8 mm?10 mm. The system can be synchronized to external sources at 0 6 kHz lasers, data acquisition systems, and cameras.

Screening for social phobia in medical in- and outpatients with the German version of the Social Phobia Inventory (SPIN).

PubMed

Sosic, Z; Gieler, U; Stangier, U

2008-06-01

To evaluate the German version of the Social Phobia Inventory (SPIN) as a screening device and to report corresponding cut-off scores for different populations. In Study 1, 2043 subjects from a representative sample completed the SPIN. Cut-off values were established on the basis of means and standard deviations. In Study 2, different aspects of validity were examined in a clinical sample comprising 164 subjects, including social phobic individuals, individuals with other anxiety disorders and depression, and non-clinical control subjects. Internal consistency was evaluated. Convergent and divergent validity were explored using several established measures. Finally, the sensitivity and specificity of the German SPIN with regard to social anxiety classification were investigated by means of receiver operating characteristics (ROC) analyses. In Study 1, mean scores and standard deviations were used to determine cut-off scores for the German SPIN. In Study 2, excellent internal consistency and good convergent and divergent validity were obtained. ROC analyses revealed that the German SPIN performed well in discriminating between social phobic individuals on the one hand and psychiatric and non-psychiatric controls on the other. A cut-off score of 25 represented the best balance between sensitivity and specificity. Comparable to the original version, the German SPIN demonstrates solid psychometric properties and shows promise as an economic, reliable, and valid screening device.

Hitting Is Contagious in Baseball: Evidence from Long Hitting Streaks

PubMed Central

Bock, Joel R.; Maewal, Akhilesh; Gough, David A.

2012-01-01

Data analysis is used to test the hypothesis that “hitting is contagious”. A statistical model is described to study the effect of a hot hitter upon his teammates’ batting during a consecutive game hitting streak. Box score data for entire seasons comprising streaks of length games, including a total observations were compiled. Treatment and control sample groups () were constructed from core lineups of players on the streaking batter’s team. The percentile method bootstrap was used to calculate confidence intervals for statistics representing differences in the mean distributions of two batting statistics between groups. Batters in the treatment group (hot streak active) showed statistically significant improvements in hitting performance, as compared against the control. Mean for the treatment group was found to be to percentage points higher during hot streaks (mean difference increased points), while the batting heat index introduced here was observed to increase by points. For each performance statistic, the null hypothesis was rejected at the significance level. We conclude that the evidence suggests the potential existence of a “statistical contagion effect”. Psychological mechanisms essential to the empirical results are suggested, as several studies from the scientific literature lend credence to contagious phenomena in sports. Causal inference from these results is difficult, but we suggest and discuss several latent variables that may contribute to the observed results, and offer possible directions for future research. PMID:23251507

40 CFR 205.151 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... classification unit of a manufacturer's product line and is comprised of all vehicle designs, models or series... surface. (3) Competition motorcycle means any motorcycle designed and marketed solely for use in closed.... (7) Acoustical Assurance Period (AAP) means a specified period of time or miles driven after sale to...

40 CFR 205.151 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... classification unit of a manufacturer's product line and is comprised of all vehicle designs, models or series... surface. (3) Competition motorcycle means any motorcycle designed and marketed solely for use in closed.... (7) Acoustical Assurance Period (AAP) means a specified period of time or miles driven after sale to...

40 CFR 205.151 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... classification unit of a manufacturer's product line and is comprised of all vehicle designs, models or series... surface. (3) Competition motorcycle means any motorcycle designed and marketed solely for use in closed.... (7) Acoustical Assurance Period (AAP) means a specified period of time or miles driven after sale to...

7 CFR 58.1 - Meaning of words.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 Regulations... official tests in accordance with this part. Approved plant means one or more adjacent buildings, or parts thereof, comprising a single plant at one location in which the facilities and methods of operation...

7 CFR 58.1 - Meaning of words.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 Regulations... official tests in accordance with this part. Approved plant means one or more adjacent buildings, or parts thereof, comprising a single plant at one location in which the facilities and methods of operation...

7 CFR 58.1 - Meaning of words.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 Regulations... official tests in accordance with this part. Approved plant means one or more adjacent buildings, or parts thereof, comprising a single plant at one location in which the facilities and methods of operation...

Electrokinetic electrode system for extraction of soil contaminants from unsaturated soils

DOEpatents

Lindgren, Eric R.; Mattson, Earl D.

1995-01-01

There is presented an electrokinetic electrode assembly for use in extraction of soil contaminants from unsaturated soil in situ. The assembly includes a housing for retaining a liquid comprising an electrolyte solution, pure water, and soil water, the housing being in part of porous material capable of holding a vacuum. An electrode is mounted in the housing. The housing is provided with a vacuum orifice for effecting a vacuum within the housing selectively to control flow of soil water through the housing into the chamber and to control outflow of the liquid from the chamber. The assembly further includes conduit means for removing the liquid from the housing and returning the electrolyte solution to the housing, and a conduit for admitting pure water to the housing. There is further presented an electrode system and method for extraction of soil contaminants, the system and method utilizing at least two electrode assemblies as described above.

Electrokinetic electrode system for extraction of soil contaminants from unsaturated soils

DOEpatents

Lindgren, E.R.; Mattson, E.D.

1995-07-25

An electrokinetic electrode assembly is described for use in extraction of soil contaminants from unsaturated soil in situ. The assembly includes a housing for retaining a liquid comprising an electrolyte solution, pure water, and soil water, the housing being in part of porous material capable of holding a vacuum. An electrode is mounted in the housing. The housing is provided with a vacuum orifice for effecting a vacuum within the housing selectively to control flow of soil water through the housing into the chamber and to control outflow of the liquid from the chamber. The assembly further includes conduit means for removing the liquid from the housing and returning the electrolyte solution to the housing, and a conduit for admitting pure water to the housing. An electrode system and method are also revealed for extraction of soil contaminants. The system and method utilize at least two electrode assemblies as described above. 5 figs.

A study of the diffusional behavior of a two-phase metal matrix composite exposed to a high temperature environment

NASA Technical Reports Server (NTRS)

Tenney, D. R.

1974-01-01

The progress of diffusion-controlled filament-matrix interaction in a metal matrix composite where the filaments and matrix comprise a two-phase binary alloy system was studied by mathematically modeling compositional changes resulting from prolonged elevated temperature exposure. The analysis treats a finite, diffusion-controlled, two-phase moving-interface problem by means of a variable-grid finite-difference technique. The Ni-W system was selected as an example system. Modeling was carried out for the 1000 to 1200 C temperature range for unidirectional composites containing from 6 to 40 volume percent tungsten filaments in a Ni matrix. The results are displayed to show both the change in filament diameter and matrix composition as a function of exposure time. Compositional profiles produced between first and second nearest neighbor filaments were calculated by superposition of finite-difference solutions of the diffusion equations.

Compressed gas fuel storage system

DOEpatents

Wozniak, John J.; Tiller, Dale B.; Wienhold, Paul D.; Hildebrand, Richard J.

2001-01-01

A compressed gas vehicle fuel storage system comprised of a plurality of compressed gas pressure cells supported by shock-absorbing foam positioned within a shape-conforming container. The container is dimensioned relative to the compressed gas pressure cells whereby a radial air gap surrounds each compressed gas pressure cell. The radial air gap allows pressure-induced expansion of the pressure cells without resulting in the application of pressure to adjacent pressure cells or physical pressure to the container. The pressure cells are interconnected by a gas control assembly including a thermally activated pressure relief device, a manual safety shut-off valve, and means for connecting the fuel storage system to a vehicle power source and a refueling adapter. The gas control assembly is enclosed by a protective cover attached to the container. The system is attached to the vehicle with straps to enable the chassis to deform as intended in a high-speed collision.

Structural Acoustic Response of a Shape Memory Alloy Hybrid Composite Panel (Lessons Learned)

NASA Technical Reports Server (NTRS)

Turner, Travis L.

2002-01-01

This study presents results from an effort to fabricate a shape memory alloy hybrid composite (SMAHC) panel specimen and test the structure for dynamic response and noise transmission characteristics under the action of thermal and random acoustic loads. A method for fabricating a SMAHC laminate with bi-directional SMA reinforcement is described. Glass-epoxy unidirectional prepreg tape and Nitinol ribbon comprise the material system. Thermal activation of the Nitinol actuators was achieved through resistive heating. The experimental hardware required for mechanical support of the panel/actuators and for establishing convenient electrical connectivity to the actuators is presented. Other experimental apparatus necessary for controlling the panel temperature and acquiring structural acoustic data are also described. Deficiency in the thermal control system was discovered in the process of performing the elevated temperature tests. Discussion of the experimental results focuses on determining the causes for the deficiency and establishing means for rectifying the problem.

Structural acoustic response of a shape memory alloy hybrid composite panel (lessons learned)

NASA Astrophysics Data System (ADS)

Turner, Travis L.

2002-07-01

This study presents results from an effort to fabricate a shape memory alloy hybrid composite (SMAHC) panel specimen and test the structure for dynamic response and noise transmission characteristics under the action of thermal and random acoustic loads. A method for fabricating a SMAHC laminate with bi-directional SMA reinforcement is described. Glass-epoxy unidirectional prepreg tape and Nitinol ribbon comprise the material system. Thermal activation of the Nitinol actuators was achieved through resistive heating. The experimental hardware required for mechanical support of the panel/actuators and for establishing convenient electrical connectivity to the actuators is presented. Other experimental apparatus necessary for controlling the panel temperature and acquiring structural acoustic data are also described. Deficiency in the thermal control system was discovered in the process of performing the elevated temperature tests. Discussion of the experimental results focuses on determining the causes for the deficiency and establishing means for rectifying the problem.

Stimulant Paste Preparation and Bark Streak Tapping Technique for Pine Oleoresin Extraction.

PubMed

Füller, Thanise Nogueira; de Lima, Júlio César; de Costa, Fernanda; Rodrigues-Corrêa, Kelly C S; Fett-Neto, Arthur G

2016-01-01

Tapping technique comprises the extraction of pine oleoresin, a non-wood forest product consisting of a complex mixture of mono, sesqui, and diterpenes biosynthesized and exuded as a defense response to wounding. Oleoresin is used to produce gum rosin, turpentine, and their multiple derivatives. Oleoresin yield and quality are objects of interest in pine tree biotechnology, both in terms of environmental and genetic control. Monitoring these parameters in individual trees grown in the field provides a means to examine the control of terpene production in resin canals, as well as the identification of genetic-based differences in resinosis. A typical method of tapping involves the removal of bark and application of a chemical stimulant on the wounded area. Here we describe the methods for preparing the resin-stimulant paste with different adjuvants, as well as the bark streaking process in adult pine trees.

Feasibility of satellite interferometry for surveillance, navigation, and traffic control

NASA Technical Reports Server (NTRS)

Gopalapillai, S.; Ruck, G. T.; Mourad, A. G.

1976-01-01

The feasibility of using a satellite borne interferometry system for surveillance, navigation, and traffic control applications was investigated. The evaluation was comprised of: (1) a two part systems analysis (software and hardware); (2) a survey of competitive navigation systems (both experimental and planned); (3) a comparison of their characteristics and capabilities with those of an interferometry system; and (4) a limited survey of potential users to determine the variety of possible applications for the interferometry system and the requirements which it would have to meet. Five candidate or "strawman" interferometry systems for various applications with various capabilities were configured (on a preliminary basis) and were evaluated. It is concluded that interferometry in conjunction with a geostationary satellite has an inherent ability to provide both a means for navigation/position location and communication. It offers a very high potential for meeting a large number of user applications and requirements for navigation and related functions.

Impulse-control disorders in a college sample: results from the self-administered Minnesota Impulse Disorders Interview (MIDI).

PubMed

Odlaug, Brian L; Grant, Jon E

2010-01-01

This study sought to examine the prevalence rates of and gender differences among impulse-control disorders in a college sample. During the fall semester of 2006, 791 college students from 2 private colleges in the Midwest completed a self-administered, modified version of the Minnesota Impulse Disorders Interview to assess lifetime rates of DSM-IV-TR-diagnosed impulse-control disorders. Participation was voluntary and anonymous. The mean age of the sample was 20.0 +/- 1.25 years, with females comprising 67.9% of the respondents. Of the individuals, 10.4% (n = 82) met criteria for at least 1 lifetime impulse-control disorder. The most common disorders were trichotillomania (3.91%) and compulsive sexual behavior (3.66%). Kleptomania was the least common (0.38%). Males were significantly more likely to screen positive for pathological gambling (P = .003) and compulsive sexual behavior (P = .002). Females were more likely to have compulsive buying (P = .033). Impulse-control disorders appear to be common among college students. The high rates indicate that these disorders may be incipient during late adolescence and early adulthood and should be addressed prior to onset of clinical versions of the impulse-control disorder.

Means for the focusing and acceleration of parallel beams of charged particles. [Patent application

DOEpatents

Maschke, A.W.

1980-09-23

Apparatus for focusing beams of charged particles comprising planar arrays of electrostatic quadrupoles. The array may be assembled from a single component which comprises a support plate containing uniform rows of poles. Each pole is separated by a hole through the plate designed to pass a beam. Two such plates may be positioned with their poles intermeshed to form a plurality of quadrupoles.

Highly accurate articulated coordinate measuring machine

DOEpatents

Bieg, Lothar F.; Jokiel, Jr., Bernhard; Ensz, Mark T.; Watson, Robert D.

2003-12-30

Disclosed is a highly accurate articulated coordinate measuring machine, comprising a revolute joint, comprising a circular encoder wheel, having an axis of rotation; a plurality of marks disposed around at least a portion of the circumference of the encoder wheel; bearing means for supporting the encoder wheel, while permitting free rotation of the encoder wheel about the wheel's axis of rotation; and a sensor, rigidly attached to the bearing means, for detecting the motion of at least some of the marks as the encoder wheel rotates; a probe arm, having a proximal end rigidly attached to the encoder wheel, and having a distal end with a probe tip attached thereto; and coordinate processing means, operatively connected to the sensor, for converting the output of the sensor into a set of cylindrical coordinates representing the position of the probe tip relative to a reference cylindrical coordinate system.

Fuel cell system

DOEpatents

Early, Jack; Kaufman, Arthur; Stawsky, Alfred

1982-01-01

A fuel cell system is comprised of a fuel cell module including sub-stacks of series-connected fuel cells, the sub-stacks being held together in a stacked arrangement with cold plates of a cooling means located between the sub-stacks to function as electrical terminals. The anode and cathode terminals of the sub-stacks are connected in parallel by means of the coolant manifolds which electrically connect selected cold plates. The system may comprise a plurality of the fuel cell modules connected in series. The sub-stacks are designed to provide a voltage output equivalent to the desired voltage demand of a low voltage, high current DC load such as an electrolytic cell to be driven by the fuel cell system. This arrangement in conjunction with switching means can be used to drive a DC electrical load with a total voltage output selected to match that of the load being driven. This arrangement eliminates the need for expensive voltage regulation equipment.

A prospective study of a caries prevention program in pregnant women and their children five and six years of age.

PubMed

Gomez, S S; Weber, A A; Emilson, C G

2001-01-01

A preventive dental program (PDP) instituted in pregnant women and comprising an educational and a preventive part was evaluated when their children were five and six years of age. Dental caries was examined in sixty-seven mother-child pairs belonging to the program and in sixty-nine control mother-child pairs. In the five-year-old children 87 percent of the PDP group were caries free compared with the 50 percent in the control group. Comparable figures for six-year-old children were 89 percent and 62 percent in the PDP and control group, respectively. The mean dft of the PDP children five and six years of age was 0.4 and 0.2, respectively, versus 1.3 and 1.4 for the control children. The differences in caries-free status and caries prevalence were statistically significant. In conclusion, the preventive dental program which started in pregnant women and continued in the mothers and their children were highly effective for a long-term reduction of dental caries.

Innovative Magnetic Resonance Imaging Markers of Hereditary Cerebral Amyloid Angiopathy at 7 Tesla.

PubMed

Koemans, Emma A; van Etten, Ellis S; van Opstal, Anna M; Labadie, Gerda; Terwindt, Gisela M; Wermer, Marieke J H; Webb, Andrew G; Gurol, Edip M; Greenberg, Steven M; van Buchem, Mark A; van der Grond, Jeroen; van Rooden, Sanneke

2018-06-01

The aim of the present study is to explore whether using 7 Tesla magnetic resonance imaging, additional brain changes can be observed in hereditary cerebral hemorrhage with amyloidosis-Dutch type (HCHWA-D) patients as compared with the established magnetic resonance imaging features of sporadic cerebral amyloid angiopathy. The local institutional review board approved this prospective cohort study. In all cases, informed consent was obtained. This prospective parallel cohort study was conducted between 2012 and 2014. We performed T 2 *-weighted magnetic resonance imaging performed at 7 Tesla in presymptomatic mutation carriers (n=11, mean age 35±12 years), symptomatic HCHWA-D patients (n=15, mean age 45±14 years), and in control subjects (n=29, mean age 45±14 years). Images were analyzed for the presence of changes that have not been reported before in sporadic cerebral amyloid angiopathy and HCHWA-D. Innovative observations comprised intragyral hemorrhaging and cortical changes. The presence of these changes was systematically assessed in all participants of the study. Symptomatic HCHWA-D-patients had a higher incidence of intragyral hemorrhage (47% [7/15], controls 0% [0/29], P <0.001), and a higher incidence of specific cortical changes (40% [6/15] versus 0% [0/29], P <0.005). In presymptomatic HCHWA-D-mutation carriers, the prevalence of none of these markers was increased compared with control subjects. The presence of cortical changes and intragyral hemorrhage are imaging features of HCHWA-D that may help recognizing sporadic cerebral amyloid angiopathy in living patients. © 2018 American Heart Association, Inc.

Natural variation in 210Po and 210Pb activity concentrations in the urine of Finnish population groups.

PubMed

Muikku, Maarit; Heikkinen, Tarja; Solatie, Dina; Vesterbacka, Pia

2011-11-01

A study to determine activity concentrations of (210)Pb and (210)Po in the urine of certain Finnish population groups was conducted, to investigate the variation in natural background level of urinary excretion. The study participants were divided into three groups mainly based on their diet. The first group comprised recreational fishermen and the second group represented people consuming more reindeer meat than an average Finn, while people using drinking water with very high activity concentrations of (210)Po were selected for the third group. The fourth group was a control group. The mean urinary excretion of (210)Po in groups 1 and 2 was 73 and 100 mBq d(-1), respectively. These values were higher than the value of the control group (20 mBq d(-1)) and the mean values reported in the literature. The mean daily urinary excretion of (210)Pb in groups 1 and 2, 70 and 52 mBq d(-1), was also slightly higher than that in the control group (32 mBq d(-1)). In contrast, the excretion rates of both (210)Po and (210)Pb for the members of group 3 were one to two orders of magnitude higher than those reported in the literature. This was clearly due to the elevated levels of natural radionuclides in their drinking water. The present study demonstrates the importance of possessing good knowledge of the background levels, in order to allow the determination of the additional exposure due, for example, to the malevolent use of radiation.

Means and method for the focusing and acceleration of parallel beams of charged particles

DOEpatents

Maschke, Alfred W.

1983-07-05

A novel apparatus and method for focussing beams of charged particles comprising planar arrays of electrostatic quadrupoles. The quadrupole arrays may comprise electrodes which are shared by two or more quadrupoles. Such quadrupole arrays are particularly adapted to providing strong focussing forces for high current, high brightness, beams of charged particles, said beams further comprising a plurality of parallel beams, or beamlets, each such beamlet being focussed by one quadrupole of the array. Such arrays may be incorporated in various devices wherein beams of charged particles are accelerated or transported, such as linear accelerators, klystron tubes, beam transport lines, etc.

The Meaning of General Education: The Emergence of a Curriculum Paradigm.

ERIC Educational Resources Information Center

Miller, Gary E.

An historical and conceptual analysis of general education in the United States is presented, comprising the following chapters: (1) transformation and the search for meaning (including a discussion of the concept of general education); (2) the classical curriculum confronts democracy (democratic pressures on the classical curriculum; the Yale…

Device for self-verifying temperature measurement and control

DOEpatents

Watkins, Arthur D.; Cannon, Collins P.; Tolle, Charles R.

2004-08-03

A measuring instrument includes a first temperature sensor, a second temperature sensor and circuitry. The first and second temperature sensors each generate a signal indicative of the temperature of a medium being detected. The circuitry is configured to activate verification of temperature being sensed with the first sensor. According to one construction, the first temperature sensor comprises at least one thermocouple temperature sensor and the second temperature sensor comprises an optical temperature sensor, each sensor measuring temperature over the same range of temperature, but using a different physical phenomena. Also according to one construction, the circuitry comprises a computer configured to detect failure of one of the thermocouples by comparing temperature of the optical temperature sensor with each of the thermocouple temperature sensors. Even further, an output control signal is generated via a fuzzy inference machine and control apparatus.

Device and method for self-verifying temperature measurement and control

DOEpatents

Watkins, Arthur D.; Cannon, Collins P.; Tolle, Charles R.

2002-10-29

A measuring instrument includes a first temperature sensor, a second temperature sensor and circuitry. The first and second temperature sensors each generate a signal indicative of the temperature of a medium being detected. The circuitry is configured to activate verification of temperature being sensed with the first sensor. According to one construction, the first temperature sensor comprises at least one thermocouple temperature sensor and the second temperature sensor comprises an optical temperature sensor, each sensor measuring temperature over the same range of temperature, but using a different physical phenomena. Also according to one construction, the circuitry comprises a computer configured to detect failure of one of the thermocouples by comparing temperature of the optical temperature sensor with each of the thermocouple temperature sensors. Even further, an output control signal is generated via a fuzzy inference machine and control apparatus.

Slow-release fertilizer

NASA Technical Reports Server (NTRS)

Golden, Dadigamuwage C. (Inventor); Ming, Douglas W. (Inventor)

1995-01-01

A synthetic apatite containing agronutrients and a method for making the apatite are disclosed. The apatite comprises crystalline calcium phosphate having agronutrients dispersed in the crystalline structure. The agronutrients can comprise potassium, magnesium, sulfur, iron, manganese, molybdenum, chlorine, boron, copper and zinc in amounts suited for plant growth. The apatite can optionally comprise a carbonate and/or silicon solubility control agent. The agronutrients are released slowly as the apatite dissolves.

Slow-release fertilizer

NASA Technical Reports Server (NTRS)

Ming, Douglas W. (Inventor); Golden, D. C. (Inventor)

1992-01-01

A synthetic apatite containing agronutrients and a method for making the apatite are disclosed. The apatite comprises crystalline calcium phosphate having agronutrients dispersed in the crystalline structure. The agronutrients can comprise potassium, magnesium, sulfur, iron, manganese, molybdenum, chlorine, boron, copper and zinc in amounts suited for plant growth. The apatite can optionally comprise a carbonate and/or silicon solubility control agent. The agronutrients are released slowly as the apatite dissolves.

Slow-release fertilizer

NASA Astrophysics Data System (ADS)

Ming, Douglas W.; Golden, D. C.

1992-10-01

A synthetic apatite containing agronutrients and a method for making the apatite are disclosed. The apatite comprises crystalline calcium phosphate having agronutrients dispersed in the crystalline structure. The agronutrients can comprise potassium, magnesium, sulfur, iron, manganese, molybdenum, chlorine, boron, copper and zinc in amounts suited for plant growth. The apatite can optionally comprise a carbonate and/or silicon solubility control agent. The agronutrients are released slowly as the apatite dissolves.

Temperature actuated automatic safety rod release

DOEpatents

Hutter, E.; Pardini, J.A.; Walker, D.E.

1984-03-13

A temperature-actuated apparatus is disclosed for releasably supporting a safety rod in a nuclear reactor, comprising a safety rod upper adapter having a retention means, a drive shaft which houses the upper adapter, and a bimetallic means supported within the drive shaft and having at least one ledge which engages a retention means of the safety rod upper adapter. A pre-determined increase in temperature causes the bimetallic means to deform so that the ledge disengages from the retention means, whereby the bimetallic means releases the safety rod into the core of the reactor.

Temperature actuated automatic safety rod release

DOEpatents

Hutter, Ernest; Pardini, John A.; Walker, David E.

1987-01-01

A temperature-actuated apparatus is disclosed for releasably supporting a safety rod in a nuclear reactor, comprising a safety rod upper adapter having a retention means, a drive shaft which houses the upper adapter, and a bimetallic means supported within the drive shaft and having at least one ledge which engages a retention means of the safety rod upper adapter. A pre-determined increase in temperature causes the bimetallic means to deform so that the ledge disengages from the retention means, whereby the bimetallic means releases the safety rod into the core of the reactor.

Mesoporous metal oxides and processes for preparation thereof

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suib, Steven L.; Poyraz, Altug Suleyman

A process for preparing a mesoporous metal oxide, i.e., transition metal oxide. Lanthanide metal oxide, a post-transition metal oxide and metalloid oxide. The process comprises providing an acidic mixture comprising a metal precursor, an interface modifier, a hydrotropic ion precursor, and a surfactant; and heating the acidic mixture at a temperature and for a period of time sufficient to form the mesoporous metal oxide. A mesoporous metal oxide prepared by the above process. A method of controlling nano-sized wall crystallinity and mesoporosity in mesoporous metal oxides. The method comprises providing an acidic mixture comprising a metal precursor, an interface modifier,more » a hydrotropic ion precursor, and a surfactant; and heating the acidic mixture at a temperature and for a period of time sufficient to control nano-sized wall crystallinity and mesoporosity in the mesoporous metal oxides. Mesoporous metal oxides and a method of tuning structural properties of mesoporous metal oxides.« less

Application of microturbines to control emissions from associated gas

DOEpatents

Schmidt, Darren D.

2013-04-16

A system for controlling the emission of associated gas produced from a reservoir. In an embodiment, the system comprises a gas compressor including a gas inlet in fluid communication with an associated gas source and a gas outlet. The gas compressor adjusts the pressure of the associated gas to produce a pressure-regulated associated gas. In addition, the system comprises a gas cleaner including a gas inlet in fluid communication with the outlet of the gas compressor, a fuel gas outlet, and a waste product outlet. The gas cleaner separates at least a portion of the sulfur and the water from the associated gas to produce a fuel gas. Further, the system comprises a gas turbine including a fuel gas inlet in fluid communication with the fuel gas outlet of the gas cleaner and an air inlet. Still further, the system comprises a choke in fluid communication with the air inlet.

Digitally controlled distributed phase shifter

DOEpatents

Hietala, V.M.; Kravitz, S.H.; Vawter, G.A.

1993-08-17

A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one or two discrete bias voltages. The application of the discrete bias voltages changes the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

Digitally controlled distributed phase shifter

DOEpatents

Hietala, Vincent M.; Kravitz, Stanley H.; Vawter, Gregory A.

1993-01-01

A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one or two discrete bias voltages. The application of the discrete bias voltages changes the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

Antidepressant exposure may protect against decrement in frontal gray matter volumes in geriatric depression.

PubMed

Lavretsky, Helen; Roybal, Donna J; Ballmaier, Martina; Toga, Arthur W; Kumar, Anand

2005-08-01

Depressed elderly patients with and without antidepressant exposure were compared to normal controls to examine the effects of prior antidepressant exposure on regional brain gray matter volumes using magnetic resonance imaging (MRI). The study was conducted from October 1999 to January 2003. Patients and controls were closely matched by age and education. They underwent comprehensive neuropsychiatric and physical examinations. Measures of the total frontal lobe and the frontal gray and white matter volumes corrected by the intracranial volume were obtained using MRI, together with clinical measures of medical burden. Historical information about prior exposure to antidepressant drugs was collected using multiple information sources. The groups were compared using multivariate analyses of covariance, controlling for age, sex, and medical burden. The study sample comprised 41 patients who met the DSM-IV criteria for major depressive disorder (32 women; 11 antidepressant exposure and 30 drug-naive; mean age 70.5 years) and 41 controls (20 women; mean age 72.2 years). In the multivariate analysis, the depressed group had smaller corrected orbitofrontal cortex (OFC) total and gray matter volumes compared to the controls (p < .01). However, depressed patients with prior antidepressant exposure had larger OFC gray matter volumes compared to drug-naive depressed patients, but smaller than those in normal controls (p = .005). This effect was not explained by the group differences in sex ratio, age at onset of depression, or the number or duration of depressive episodes. We observed larger OFC regional volumes in depressed patients exposed to antidepressants compared to the drug-naive depressed subjects, but smaller than those in age-matched controls. Antidepressant exposure may protect against gray matter loss in geriatric depression.

Electrochemical sensor/detector system and method

DOEpatents

Glass, Robert S.; Perone, Sam P.; Ciarlo, Dino R.; Kimmons, James F.

1992-01-01

An electrochemical detection system is described comprising in combination: (a) a multielement, microelectrode array detector containing means for acquiring a plurality of signals; (b) electronic means for receiving said signals and converting said signals into a readout or display providing information with respect to the nature and concentration of elements present in a solution being tested. Also described is the means of making the above described microelectrode detector.

Electrochemical sensor/detector system and method

DOEpatents

Glass, Robert S.; Perone, Sam P.; Ciarlo, Dino R.; Kimmons, James F.

1994-01-01

An electrochemical detection system is described comprising in combination: (a) a multielement, microelectrode array detector containing means for acquiring a plurality of signals; (b) electronic means for receiving said signals and converting said signals into a readout or display providing information with respect to the nature and concentration of elements present in a solution being tested. Also described is the means of making the above described microelectrode detector.

Efficiency of adalimumab, etanercept and infliximab in rheumatoid arthritis patients: dosing patterns and effectiveness in daily clinical practice.

PubMed

Ramírez-Herráiz, Esther; Escudero-Vilaplana, Vicente; Alañón-Plaza, Estefanía; Trovato-López, Nicolás; Herranz-Alonso, Ana; Morell-Baladrón, Alberto; Sanjurjo-Sáez, María

2013-01-01

This retrospective, multicentre, observational study aimed to assess the mean annual doses and associated costs of three anti-tumour necrosis factor agents in daily clinical practice in rheumatoid arthritis patients, correlating these costs with disease activity. Adult rheumatoid arthritis patients were treated and followed at the Rheumatology departments of two Spanish hospitals for at least 6 months, with adalimumab, etanercept or infliximab over a 4-year period. ANOVA and multivariate statistical analyses of dosing patterns, disease activity and annualised costs were carried out. A total of 198 patients, comprising 215 cases, met the inclusion criteria (73 on adalimumab, 81 etanercept and 61 infliximab). Compared to recommended doses, mean doses of adalimumab and etanercept decreased by 7% and 19%, respectively, while the mean dose of infliximab increased by 36%. There were no statistical differences between treatments in terms of clinical effectiveness. The hazard of dose escalation was significantly higher for either adalimumab (4.4-fold) or infliximab (11.8-fold) compared to etanercept (p<0.05). Clinical control was achieved and maintained in more than half of the patients treated with reduced doses of etanercept. Associated mean patient-year costs were significantly higher in adalimumab patients (€11.962.58) (etanercept €9.594.73; infliximab €10.094.53; [p<0.05]). In rheumatoid arthritis patients, it is possible to reduce doses and associated costs of biological therapies while controlling disease activity. Mean doses used in our clinical practice were significantly lower with etanercept than with the anti-TNF monoclonal antibodies, adalimumab and infliximab. Dose differences impact directly on associated patient-year costs, and thus on treatment efficiency.

Effect of activity-based mirror therapy on lower limb motor-recovery and gait in stroke: A randomised controlled trial.

PubMed

Arya, Kamal Narayan; Pandian, Shanta; Kumar, Vikas

2017-09-26

To determine the effect of activity-based mirror therapy (MT) on motor recovery and gait in chronic poststroke hemiparetic subjects. A randomised, controlled, assessor-blinded trial. Rehabilitation institute. Thirty-six chronic poststroke (15.89 ± 9.01 months) hemiparetic subjects (age: 46.44 ± 7.89 years, 30 men and functional ambulation classification of median level 3). Activity-based MT comprised movements such as ball-rolling, rocker-board, and pedalling. The activities were provided on the less-affected side in front of the mirror while hiding the affected limb. The movement of the less-affected lower limb was projected as over the affected limb. Conventional motor therapy based on neurophysiological approaches was also provided to the experimental group. The control group received only conventional management. Brunnstrom recovery stages (BRS), Fugl-Meyer assessment lower extremity (FMA-LE), Rivermead visual gait assessment (RVGA), and 10-metre walk test (10-MWT). Postintervention, the experimental group exhibited significant and favourable changes for FMA-LE (mean difference = 3.29, 95% CI = 1.23-5.35, p = .003) and RVGA (mean difference = 5.41, 95% CI = 1.12-9.71, p = .015) in comparison to the control group. No considerable changes were observed on 10-MWT. Activity-based MT facilitates motor recovery of the lower limb as well as reduces gait deviations among chronic poststroke hemiparetic subjects.

[Effect of ambulatory supervised cardiac training on arterial hypertension in patients with coronary artery disease and arterial hypertension].

PubMed

Kałka, Dariusz; Sobieszczańska, Małgorzata; Marciniak, Wojciech; Popielewicz-Kautz, Aleksandra; Markuszewski, Leszek; Chorebała, Arkadiusz; Korzeniowska, Joanna; Janczak, Jacek; Adamus, Jerzy

2007-01-01

Arterial hypertension is one of the most common health problems occurring in highly developed countries. It was proved that long-term and regular physical activity results in hypotensive effect. A goal of the present study was to assess an influence of six-month ambulatory cardiac rehabilitation on arterial pressure level in patients with coronary artery disease and hypertension as well as analysis of correlation between pressure values alterations and intensity of cardiac training. A study group comprised 103 patients (mean age: 61.2 +/- 0.8 years) manifesting coronary artery disease accompanied by arterial hypertension. A control group constituted 39 normotensive patients with coronary artery disease (mean age: 59.4 +/- 1.3 years). The both observed groups differ from each other only with values of left ventricle mass index and drug regimen established at least three months prior to the follow-up onset. During the rehabilitation cycle, no treatment corrections were made and no new preparations were added. The all patients were enrolled to the six-month cardiac rehabilitation program. The program comprised 45-minute training with cycle ergometer, three times a week, and generally improving gym exercises, two times a week. The analyses concerned systolic and diastolic pressure values, measured just before each training (resting pressure) and just after peak exercise interval (peak pressure), at the beginning and at the end of the rehabilitation cycle. At the initial stage, the patient group with hypertension demonstrated the higher pressure values (resting and peak), as compared with the control group. Cardiac rehabilitation performed in the examined patients caused a statistically significant reduction of the mean resting pressure, both systolic (p < 0.01) and diastolic (p < 0.01). As to the mean peak pressure in this group, systolic diminished slightly (NS), but diastolic was reduced significantly (p < 0.01). In the control group, after six-month rehabilitation the values appeared to be lowered insignificantly in relation to systolic and diastolic resting pressure, likewise diastolic peak pressure, and contrarily systolic peak pressure increased slightly. Assessing an interrelation between the final outcome of the rehabilitation program, expressed as delta of arterial pressure, and terminal training workload and delta of training workload, only for delta of systolic pressure and final training workload, a positive correlation of statistical significance was found out, which is considered an implication of physiological reaction against an increase of training workload. Long-term and regular cardiac training induced the larger alterations of pressure values in the patients with hypertension, as compared with the normotensive patients. A positive effect of cardiac rehabilitation on arterial pressure level in the hypertensive patients was found to be independent of the training intensity.

Modular robot

DOEpatents

Ferrante, T.A.

1997-11-11

A modular robot may comprise a main body having a structure defined by a plurality of stackable modules. The stackable modules may comprise a manifold, a valve module, and a control module. The manifold may comprise a top surface and a bottom surface having a plurality of fluid passages contained therein, at least one of the plurality of fluid passages terminating in a valve port located on the bottom surface of the manifold. The valve module is removably connected to the manifold and selectively fluidically connects the plurality of fluid passages contained in the manifold to a supply of pressurized fluid and to a vent. The control module is removably connected to the valve module and actuates the valve module to selectively control a flow of pressurized fluid through different ones of the plurality of fluid passages in the manifold. The manifold, valve module, and control module are mounted together in a sandwich-like manner and comprise a main body. A plurality of leg assemblies are removably connected to the main body and are removably fluidically connected to the fluid passages in the manifold so that each of the leg assemblies can be selectively actuated by the flow of pressurized fluid in different ones of the plurality of fluid passages in the manifold. 12 figs.

Enhancement of Customary Dermoscopy Education With Spaced Education e-Learning: A Prospective Controlled Trial.

PubMed

Boespflug, Amélie; Guerra, José; Dalle, Stéphane; Thomas, Luc

2015-08-01

Dermoscopy permits the detection of early-stage melanomas but is difficult to learn. It is important to develop effective teaching methods. Spaced education is a methodology within the field of adaptive learning that uses online tools to reinforce long-term retention. To determine whether a spaced education dermoscopy module improved dermoscopy skills in the continuing medical education setting and to evaluate participant satisfaction. We designed a prospective controlled study with 2 sequential cohorts of participants enrolled between September 2010 and September 2013, in the continuing medical education dermoscopy program of the Claude Bernard-Lyon 1 University in Lyon, France. Participants enrolled in this program were either certified dermatologists or senior dermatology residents. The control group (n = 95) comprised all participants enrolled during the 2 first years of the study (49 participants in the class of 2010, 46 in the class of 2011). The intervention group (n = 96) comprised all participants enrolled during the third and fourth years of the study (46 in the class of 2012; 50 in the class of 2013). All participants attended a 3-day lecture followed by small-group tutorials 4 months later. Each participant also attended a day of consultation with a dermoscopy specialist. In addition, participants in the intervention group were enrolled in an e-learning spaced education dermoscopy program. The main outcome measure was mean participant scores at the posttest evaluation, which was conducted 4 months after course enrollment. The intervention group had better results at the posttest, with a mean (SD) score (out of a possible 160.0 points) of 148.1 (5.8) (n = 82 participants) vs 145.7 (7.7) (n = 90 participants) in the control group (P = .02). Ninety-two percent of the participants (80 of 87) were extremely or very satisfied with the e-learning module. Participant engagement was high, with an average of 85% of participants (80 of 94) "on track" at any given time of the year. Our study shows that, in the context of continuing medical education, a spaced education Internet dermoscopy module combined with in-class training increases participant performances in dermoscopy. It is easy to use and adaptable to professional working schedules.

Hardware-in-the-Loop emulator for a hydrokinetic turbine

NASA Astrophysics Data System (ADS)

Rat, C. L.; Prostean, O.; Filip, I.

2018-01-01

Hydroelectric power has proven to be an efficient and reliable form of renewable energy, but its impact on the environment has long been a source of concern. Hydrokinetic turbines are an emerging class of renewable energy technology designed for deployment in small rivers and streams with minimal environmental impact on the local ecosystem. Hydrokinetic technology represents a truly clean source of energy, having the potential to become a highly efficient method of harvesting renewable energy. However, in order to achieve this goal, extensive research is necessary. This paper presents a Hardware-in-the-Loop emulator for a run-of-the-river type hydrokinetic turbine. The HIL system uses an ABB ACS800 drive to control an induction machine as a significant means of replicating the behavior of the real turbine. The induction machine is coupled to a permanent magnet synchronous generator and the corresponding load. The ACS800 drive is controlled through the software system, which comprises of the hydrokinetic turbine real-time simulation through mathematical modeling in the LabVIEW programming environment running on a NI CompactRIO (cRIO) platform. The advantages of this method are that it can provide a means for testing many control configurations without requiring the presence of the real turbine. This paper contains the basic principles of a hydrokinetic turbine, particularly the run-of-the-river configurations along with the experimental results obtained from the HIL system.

Age-related changes and sex differences in postural control adaptability in children during periodic floor oscillation with eyes closed.

PubMed

Fujiwara, Katsuo; Kiyota, Takeo; Mammadova, Aida; Yaguchi, Chie

2011-01-01

We investigated age-related changes and sex differences in adaptability of anticipatory postural control in children. Subjects comprised 449 children (4-12 years old) and 109 young adults (18-29 years old). Subjects stood with eyes closed on a force-platform fixed to a floor oscillator. We conducted five trials of 1-minute oscillation (0.5 Hz frequency, 2.5 cm amplitude) in the anteroposterior direction. Postural steadiness was quantified as the mean speed of the center of pressure in the anteroposterior direction (CoPy). In young adults, CoPy speed decreased rapidly until the third trial for both sexes. Adaptability was evaluated by changes in steadiness. The adaptability of children was categorized as "good," "moderate," and "poor," compared with a standard variation of the mean CoPy speed regression line between the first and fifth trials in young adults. Results were as follows: (1) anticipatory postural control adaptability starts to develop from age 6 in boys and 5 in girls, and greatly improves at age 7-8 in boys and 6 in girls; (2) the adaptability of children at age 11-12 (74% of boys and 63% of girls were categorized as "good") has not yet reached the same level as for young adults; (3) the adaptability at age 11-12 for girls is temporarily disturbed due to early puberty.

Androgynous, Reconfigurable Closed Loop Feedback Controlled Low Impact Docking System With Load Sensing Electromagnetic Capture Ring

NASA Technical Reports Server (NTRS)

Lewis, James L. (Inventor); Carroll, Monty B. (Inventor); Morales, Ray H. (Inventor); Le, Thang D. (Inventor)

2002-01-01

The present invention relates to a fully androgynous, reconfigurable closed loop feedback controlled low impact docking system with load sensing electromagnetic capture ring. The docking system of the present invention preferably comprises two Docking- assemblies, each docking assembly comprising a load sensing ring having an outer face, one of more electromagnets, one or more load cells coupled to said load sensing ring. The docking assembly further comprises a plurality of actuator arms coupled to said load sensing ring and capable of dynamically adjusting the orientation of said load sensing ring and a reconfigurable closed loop control system capable of analyzing signals originating from said plurality of load cells and of outputting real time control for each of the actuators. The docking assembly of the present invention incorporates an active load sensing system to automatically dynamically adjust the load sensing ring during capture instead of requiring significant force to push and realign the ring.

10 CFR 63.141 - Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... its structures, systems, or components will perform satisfactorily in service. Quality assurance includes quality control, which comprises those quality assurance actions related to the physical..., NEVADA Quality Assurance § 63.141 Scope. As used in this part, quality assurance comprises all those...

Method for measuring dose-equivalent in a neutron flux with an unknown energy spectra and means for carrying out that method

DOEpatents

Distenfeld, Carl H.

1978-01-01

A method for measuring the dose-equivalent for exposure to an unknown and/or time varing neutron flux which comprises simultaneously exposing a plurality of neutron detecting elements of different types to a neutron flux and combining the measured responses of the various detecting elements by means of a function, whose value is an approximate measure of the dose-equivalent, which is substantially independent of the energy spectra of the flux. Also, a personnel neutron dosimeter, which is useful in carrying out the above method, comprising a plurality of various neutron detecting elements in a single housing suitable for personnel to wear while working in a radiation area.

Bipolar membranes with fluid distribution passages

NASA Technical Reports Server (NTRS)

Hitchens, G. Duncan (Inventor); Archer, Shivaun (Inventor); Tennakoon, Charles L. (Inventor); Gonzalez-Martin, Anuncia (Inventor); Cisar, Alan J. (Inventor)

1999-01-01

The present invention provides a bipolar membrane and methods for making and using the membrane. The bipolar membrane comprises a cation-selective region, an anion-selective region, an interfacial region between the anion-selective region and the cation-selective region, and means for delivering fluid directly into the interfacial region. The means for delivering fluid includes passages that may comprise a fluid-permeable material, a wicking material, an open passage disposed within the membrane or some combination thereof. The passages may be provided in many shapes, sizes and configurations, but preferably deliver fluid directly to the interfacial region so that the rate of electrodialysis is no longer limited by the diffusion of fluid through the cation- or anion-selective regions to the interfacial region.

Apparatus for proton radiography

DOEpatents

Martin, Ronald L.

1976-01-01

An apparatus for effecting diagnostic proton radiography of patients in hospitals comprises a source of negative hydrogen ions, a synchrotron for accelerating the negative hydrogen ions to a predetermined energy, a plurality of stations for stripping extraction of a radiography beam of protons, means for sweeping the extracted beam to cover a target, and means for measuring the residual range, residual energy, or percentage transmission of protons that pass through the target. The combination of information identifying the position of the beam with information about particles traversing the subject and the back absorber is performed with the aid of a computer to provide a proton radiograph of the subject. In an alternate embodiment of the invention, a back absorber comprises a plurality of scintillators which are coupled to detectors.

Idiom Comprehension Deficits in High-Functioning Autism Spectrum Disorder Using a Korean Autism Social Language Task

PubMed Central

Lee, Seul Bee; Song, Seung Ha; Ham, Ju Hyun; Song, Dong Ho

2015-01-01

Purpose High-functioning autism spectrum disorder (ASD) involves pragmatic impairment of language skills. Among numerous tasks for assessing pragmatic linguistic skills, idioms are important to evaluating high-functioning ASD. Nevertheless, no assessment tool has been developed with specific consideration of Korean culture. Therefore, we designed the Korean Autism Social Language Task (KASLAT) to test idiom comprehension in ASD. The aim of the current study was to introduce this novel psychological tool and evaluate idiom comprehension deficits in high-functioning ASD. Materials and Methods The participants included 42 children, ages 6-11 years, who visited our child psychiatric clinic between April 2014 and May 2015. The ASD group comprised 16 children; the attention deficit hyperactivity disorder (ADHD) group consisted of 16 children. An additional 10 normal control children who had not been diagnosed with either disorder participated in this study. Idiom comprehension ability was assessed in these three groups using the KASLAT. Results Both ASD and ADHD groups had significantly lower scores on the matched and mismatched tasks, compared to the normal control children (matched tasks mean score: ASD 11.56, ADHD 11.56, normal control 14.30; mismatched tasks mean score: ASD 6.50, ADHD 4.31, normal control 11.30). However, no significant differences were found in scores of KASLAT between the ADHD and ASD groups. Conclusion These findings suggest that children with ASD exhibit greater impairment in idiom comprehension, compared to normal control children. The KASLAT may be useful in evaluating idiom comprehension ability. PMID:26446644

Higher order aberrations and relative risk of symptoms after LASIK.

PubMed

Sharma, Munish; Wachler, Brian S Boxer; Chan, Colin C K

2007-03-01

To understand what level of higher order aberrations increases the relative risk of visual symptoms in patients after myopic LASIK. This study was a retrospective comparative analysis of 103 eyes of 62 patients divided in two groups, matched for age, gender, pupil size, and spherical equivalent refraction. The symptomatic group comprised 36 eyes of 24 patients after conventional LASIK with different laser systems evaluated in our referral clinic and the asymptomatic control group consisted of 67 eyes of 38 patients following LADARVision CustomCornea wavefront LASIK. Comparative analysis was performed for uncorrected visual acuity (UCVA), best spectacle-corrected visual acuity (BSCVA), contrast sensitivity, refractive cylinder, and higher order aberrations. Wavefront analysis was performed with the LADARWave aberrometer at 6.5-mm analysis for all eyes. Blurring of vision was the most common symptom (41.6%) followed by double image (19.4%), halo (16.7%), and fluctuation in vision (13.9%) in symptomatic patients. A statistically significant difference was noted in UCVA (P = .001), BSCVA (P = .001), contrast sensitivity (P < .001), and manifest cylinder (P = .001) in the two groups. The percentage difference between the symptomatic and control group mean root-mean-square (RMS) values ranged from 157% to 206% or 1.57 to 2.06 times greater. Patients with visual symptoms after LASIK have significantly lower visual acuity and contrast sensitivity and higher mean RMS values for higher order aberrations than patients without symptoms. Root-mean-square values of greater than two times the normal after-LASIK population for any given laser platform may increase the relative risk of symptoms.

Systems and methods to control multiple peripherals with a single-peripheral application code

DOEpatents

Ransom, Ray M.

2013-06-11

Methods and apparatus are provided for enhancing the BIOS of a hardware peripheral device to manage multiple peripheral devices simultaneously without modifying the application software of the peripheral device. The apparatus comprises a logic control unit and a memory in communication with the logic control unit. The memory is partitioned into a plurality of ranges, each range comprising one or more blocks of memory, one range being associated with each instance of the peripheral application and one range being reserved for storage of a data pointer related to each peripheral application of the plurality. The logic control unit is configured to operate multiple instances of the control application by duplicating one instance of the peripheral application for each peripheral device of the plurality and partitioning a memory device into partitions comprising one or more blocks of memory, one partition being associated with each instance of the peripheral application. The method then reserves a range of memory addresses for storage of a data pointer related to each peripheral device of the plurality, and initializes each of the plurality of peripheral devices.

Racial and ethnic differences in the risk of postpartum venous thromboembolism: a population-based, case-control study.

PubMed

Blondon, M; Harrington, L B; Righini, M; Boehlen, F; Bounameaux, H; Smith, N L

2014-12-01

Venous thromboembolism (VTE) is a major contributor of maternal morbidity and mortality. Whether maternal race/ethnicity is associated with the risk of postpartum VTE remains unclear. We conducted a population-based, case-control study in Washington State, from 1987 through 2011. Cases comprised all women with selected International Classification of Diseases, Ninth Edition, Clinical Modification codes for hospitalized VTE within 3 months post-delivery. Controls were randomly selected postpartum women who did not experience a VTE. Characteristics of women and their deliveries were abstracted from birth certificates. Using logistic regression models, we compared the risk of postpartum VTE in black, Asian, and Hispanic women with that in non-Hispanic white women, after adjustment for maternal characteristics (age, body mass index, parity, education), pregnancy complications, and delivery methods. Our study comprised 688 cases and 10 246 controls. Among controls, the mean age and body mass index were 27.5 years and 26.3 kg m(-2) , respectively. Compared with white women, black and Asian women had a greater and lower risk of postpartum VTE (adjusted odds ratio [OR] 1.50, 95% confidence interval [CI] 1.10-2.04 and OR 0.67, 95%CI 0.48-0.94, respectively). A lower risk was present in Hispanic women (adjusted OR 0.80, 95% CI 0.61-1.06) but was not statistically significant. In subgroup analyses, we observed an increased risk for black compared with white women among women who delivered via cesarean section (OR 2.03, 95% CI 1.34-3.07) but not among vaginal deliveries (OR 1.03, 95% CI 0.61-1.74). Maternal race/ethnicity is associated with the risk of postpartum VTE, independently of other risk factors, and should be considered when assessing the use of thromboprophylaxis after delivery. © 2014 International Society on Thrombosis and Haemostasis.

Nuclear propulsion apparatus with alternate reactor segments

DOEpatents

Szekely, Thomas

1979-04-03

1. Nuclear propulsion apparatus comprising: A. means for compressing incoming air; B. nuclear fission reactor means for heating said air; C. means for expanding a portion of the heated air to drive said compressing means; D. said nuclear fission reactor means being divided into a plurality of radially extending segments; E. means for directing a portion of the compressed air for heating through alternate segments of said reactor means and another portion of the compressed air for heating through the remaining segments of said reactor means; and F. means for further expanding the heated air from said drive means and the remaining heated air from said reactor means through nozzle means to effect reactive thrust on said apparatus.

Growth and physiological responses to surgical and gastric radio transmitter implantation techniques in subyearling chinook salmon (Oncorhynchus tshawytscha)

USGS Publications Warehouse

Martinelli, Theresa L.; Hansel, H.C.; Shively, R.S.

1998-01-01

We examined the effects of surgical and gastric transmitter implantation techniques on the growth, general physiology and behavior of 230 subyearling chinook salmon (Oncorhynchus tshawytscha, Walbaum) (100 mm-154 mm fork length). The transmitter weighed 1.3 g in air (0.9 g in water) and comprised, on average, 6% of the body weight of the fish (in air). Individuals were randomly assigned to an experimental group (control, surgical or gastric) and a sampling period (day 5 or day 21). Relative growth rate was expressed as% body weight gained/day. General condition was assessed by necropsy. Physiological response variables included hematocrit, leucocrit and plasma protein concentration. The mean relative growth rates of control, surgical and gastric fish were not significantly different at day 5. By day 21, the gastric group had a significantly lower relative growth rate (1.3%) as compared to the surgical group (1.8%) and the control group (1.9%) (P = 0.0001). Mean hematocrit values were significantly lower in the surgical (41.8%) and gastric (42.2%) groups as compared to controls (47.3%) at day 5 (P = 0.01), but all were within normal range for salmonids. No significant differences in hematocrit values were detected at day 21. Leucocrit values for all groups were ??? 1% in 99% of the fish. Both tagged groups had significantly lower mean plasma protein levels as compared to controls at day 5 (P = 0.001) and day 21 (P = 0.0001). At day 21 the gastric group (64.4 g 100 m1-1) had significantly lower mean plasma protein levels than the surgical group (68.8 g 100 ml-1) (P = 0.0001). Necropsies showed decreasing condition of gastrically tagged fish over time, and increasing condition of surgical fish. Paired releases of surgically and gastrically implanted yearling chinook salmon in the lower Columbia River in spring, 1996 revealed few significant differences in migration behavior through two reservoirs. We conclude that gastrically implanted fish show decreased growth and condition over a 21 d period. We recommend a surgical implantation method for long-term studies of juvenile salmonids, however, gastric implantation may be suitable for short-term studies.

Apparatus for tensile testing plate-type ceramic specimens

DOEpatents

Liu, K.C.

1993-08-24

Apparatus is described for gripping a plate-type tensile specimen having generally T-shaped end regions in a dynamic tension fatigue testing apparatus comprising an annular housing having an open-ended elongated cavity therein, a plurality of hydraulic piston means supported by the housing in a spaced array about the cavity, and a specimen-supporting plate means overlying the piston means at one end of the elongated cavity and displaceable by said piston means in a longitudinal direction with respect to the longitudinal axis of the cavity, said apparatus for gripping a flat plate-type tensile specimen comprising: a pair of elongated pull rods each having oppositely disposed first and second end regions; a pair of mounting means carried by said plate means with each mounting means for pivotally attaching the first end region of each of said pull rods in a central region of said plate means for supporting said pair of elongated pull rods in a side-by-side relationship along a common longitudinal centerline within said cavity; recess means in the second end region of each of said pull rods in adjacently disposed surface regions thereof with said recess means facing one another and each adapted to receive one side of one of the generally T-shaped end regions of the plate-type tensile specimen; and load-bearing means positionable in each of said recess means and adapted to bear against a shoulder on each side of the generally T-shaped end region of the plate-type tensile specimen when a tensile loading is applied thereon.

Formation Flying of Components of a Large Space Telescope

NASA Technical Reports Server (NTRS)

Mettler, Edward; Quadrelli, Marco; Breckenridge, William

2009-01-01

A conceptual space telescope having an aperture tens of meters wide and a focal length of hundreds of meters would be implemented as a group of six separate optical modules flying in formation: a primary-membrane-mirror module, a relay-mirror module, a focal-plane-assembly module containing a fast steering mirror and secondary and tertiary optics, a primary-mirror-figure-sensing module, a scanning-electron-beam module for controlling the shape of the primary mirror, and a sunshade module. Formation flying would make it unnecessary to maintain the required precise alignments among the modules by means of an impractically massive rigid structure. Instead, a control system operating in conjunction with a metrology system comprising optical and radio subsystems would control the firing of small thrusters on the separate modules to maintain the formation, thereby acting as a virtual rigid structure. The control system would utilize a combination of centralized- and decentralized-control methods according to a leader-follower approach. The feasibility of the concept was demonstrated in computational simulations that showed that relative positions could be maintained to within a fraction of a millimeter and orientations to within several microradians.

P300 component of event-related potentials in persons with asperger disorder.

PubMed

Iwanami, Akira; Okajima, Yuka; Ota, Haruhisa; Tani, Masayuki; Yamada, Takashi; Yamagata, Bun; Hashimoto, Ryuichiro; Kanai, Chieko; Takashio, Osamu; Inamoto, Atsuko; Ono, Taisei; Takayama, Yukiko; Kato, Nobumasa

2014-10-01

In the present study, we investigated auditory event-related potentials in adults with Asperger disorder and normal controls using an auditory oddball task and a novelty oddball task. Task performance and the latencies of P300 evoked by both target and novel stimuli in the two tasks did not differ between the two groups. Analysis of variance revealed that there was a significant interaction effect between group and electrode site on the mean amplitude of the P300 evoked by novel stimuli, which indicated that there was an altered distribution of the P300 in persons with Asperger disorder. In contrast, there was no significant interaction effect on the mean P300 amplitude elicited by target stimuli. Considering that P300 comprises two main subcomponents, frontal-central-dominant P3a and parietal-dominant P3b, our results suggested that persons with Asperger disorder have enhanced amplitude of P3a, which indicated activated prefrontal function in this task.

Reading, the Arts, and the Creation of Meaning.

ERIC Educational Resources Information Center

Eisner, Elliot W., Ed.

The seven papers that comprise this book were presented at the 1977 National Art Education Association Conference on Reading, the Arts, and the Creation of Meaning held to bring together people in the arts and the fields of reading, psychology, and philosophy to explore the relationships that exist between these fields of study. Topics discussed…

Apparatus and method for aerodynamic levitation

NASA Technical Reports Server (NTRS)

Williamson, John W. (Inventor); al-Darwish, Mohamad M. (Inventor); Cashen, Grant E. (Inventor)

1993-01-01

An apparatus for the levitation of a liquid drop by a fluid flow comprising a profile generator, a fluid flow supply means operatively connected to the profile generator. The profile generator includes an elongate cylindrical shell in which is contained a profiling means for configuring the velocity profile of the fluid flow exiting the profile generator.

The Semiotic Structure of Geometry Diagrams: How Textbook Diagrams Convey Meaning

ERIC Educational Resources Information Center

Dimmel, Justin K.; Herbst, Patricio G.

2015-01-01

Geometry diagrams use the visual features of specific drawn objects to convey meaning about generic mathematical entities. We examine the semiotic structure of these visual features in two parts. One, we conduct a semiotic inquiry to conceptualize geometry diagrams as mathematical texts that comprise choices from different semiotic systems. Two,…

Discovering the Meaning of Unity of Purpose: A Case Study of Fourteen Accelerated Schools.

ERIC Educational Resources Information Center

Davidson, Betty M.; Dell, Geralyn L.

This paper presents findings of a study that examined how teachers restructuring schools came to understand the meaning of the term "unity of purpose." Fourteen Louisiana schools, comprised primarily of high-risk student populations, implemented the accelerated-schools model of restructuring. The accelerated school model is based on…

Hermatically sealed motor blower unit with stator inside hollow armature

DOEpatents

Donelian, Khatchik O.

1976-01-20

13. A hermetically sealed motor blower unit comprising, in combination, a sealed housing having a thrust plate mounted therein and having a re-entrant wall forming a central cavity in said housing, a rotor within said housing, said rotor comprising an impeller, a hollow shaft embracing said cavity and a thrust collar adapted to cooperate with said thrust plate to support the axial thrust of said shaft, one or more journal bearings within said housing for supporting the radial load of said shaft and electric motor means for rotating said rotor, said motor means comprising a motor-stator located within said cavity and adapted to cooperate through a portion of said re-entrant wall with a motor-rotor mounted within said hollow shaft, the portion of said re-entrant wall located between said motor-stator and said motor-rotor being made relatively thin to reduce electrical losses, the bearing surfaces of said thrust plate, thrust collar and journal bearings being in communication with the discharge of said impeller, whereby fluid pumped by said impeller can flow directly to said bearing surfaces to lubricate them.

Self-regulating control of parasitic loads in a fuel cell power system

NASA Technical Reports Server (NTRS)

Vasquez, Arturo (Inventor)

2011-01-01

A fuel cell power system comprises an internal or self-regulating control of a system or device requiring a parasitic load. The internal or self-regulating control utilizes certain components and an interconnection scheme to produce a desirable, variable voltage potential (i.e., power) to a system or device requiring parasitic load in response to varying operating conditions or requirements of an external load that is connected to a primary fuel cell stack of the system. Other embodiments comprise a method of designing such a self-regulated control scheme and a method of operating such a fuel cell power system.

Density controlled carbon nanotube array electrodes

DOEpatents

Ren, Zhifeng F [Newton, MA; Tu, Yi [Belmont, MA

2008-12-16

CNT materials comprising aligned carbon nanotubes (CNTs) with pre-determined site densities, catalyst substrate materials for obtaining them and methods for forming aligned CNTs with controllable densities on such catalyst substrate materials are described. The fabrication of films comprising site-density controlled vertically aligned CNT arrays of the invention with variable field emission characteristics, whereby the field emission properties of the films are controlled by independently varying the length of CNTs in the aligned array within the film or by independently varying inter-tubule spacing of the CNTs within the array (site density) are disclosed. The fabrication of microelectrode arrays (MEAs) formed utilizing the carbon nanotube material of the invention is also described.

POSITIONING DEVICE

DOEpatents

Wall, R.R.; Peterson, D.L.

1959-09-15

A positioner is described for a vertical reactor-control rod. The positioner comprises four grooved friction rotatable members that engage the control rod on all sides and shift it longitudinally. The four friction members are drivingly interconnected for conjoint rotation and comprise two pairs of coaxial members. The members of each pair are urged toward one another by hydraulic or pneumatic pressure and thus grip the control rod so as to hold it in any position or adjust it. Release of the by-draulic or pneumatic pressure permits springs between the friction members of each pair to force them apart, whereby the control rod moves quickly by gravity into the reactor.

Tuning stochastic transition rates in a bistable genetic network.

NASA Astrophysics Data System (ADS)

Chickarmane, Vijay; Peterson, Carsten

2009-03-01

We investigate the stochastic dynamics of a simple genetic network, a toggle switch, in which the system makes transitions between the two alternative states. Our interest is in exploring whether such stochastic transitions, which occur due to the intrinsic noise such as transcriptional and degradation events, can be slowed down/speeded up, without changing the mean expression levels of the two genes, which comprise the toggle network. Such tuning is achieved by linking a signaling network to the toggle switch. The signaling network comprises of a protein, which can exist either in an active (phosphorylated) or inactive (dephosphorylated) form, and where its state is determined by one of the genetic network components. The active form of the protein in turn feeds back on the dynamics of the genetic network. We find that the rate of stochastic transitions from one state to the other, is determined essentially by the speed of phosphorylation, and hence the rate can be modulated by varying the phosphatase levels. We hypothesize that such a network architecture can be implemented as a general mechanism for controlling transition rates and discuss applications in population studies of two differentiated cell lineages, ex: the myeloid/erythroid lineage in hematopoiesis.

Robotic application of a dynamic resultant force vector using real-time load-control: simulation of an ideal follower load on Cadaveric L4-L5 segments.

PubMed

Bennett, Charles R; Kelly, Brian P

2013-08-09

Standard in-vitro spine testing methods have focused on application of isolated and/or constant load components while the in-vivo spine is subject to multiple components that can be resolved into resultant dynamic load vectors. To advance towards more in-vivo like simulations the objective of the current study was to develop a methodology to apply robotically-controlled, non-zero, real-time dynamic resultant forces during flexion-extension on human lumbar motion segment units (MSU) with initial application towards simulation of an ideal follower load (FL) force vector. A proportional-integral-derivative (PID) controller with custom algorithms coordinated the motion of a Cartesian serial manipulator comprised of six axes each capable of position- or load-control. Six lumbar MSUs (L4-L5) were tested with continuously increasing sagittal plane bending to 8 Nm while force components were dynamically programmed to deliver a resultant 400 N FL that remained normal to the moving midline of the intervertebral disc. Mean absolute load-control tracking errors between commanded and experimental loads were computed. Global spinal ranges of motion and sagittal plane inter-body translations were compared to previously published values for non-robotic applications. Mean TEs for zero-commanded force and moment axes were 0.7 ± 0.4N and 0.03 ± 0.02 Nm, respectively. For non-zero force axes mean TEs were 0.8 ± 0.8 N, 1.3 ± 1.6 Nm, and 1.3 ± 1.6N for Fx, Fz, and the resolved ideal follower load vector FL(R), respectively. Mean extension and flexion ranges of motion were 2.6° ± 1.2° and 5.0° ± 1.7°, respectively. Relative vertebral body translations and rotations were very comparable to data collected with non-robotic systems in the literature. The robotically coordinated Cartesian load controlled testing system demonstrated robust real-time load-control that permitted application of a real-time dynamic non-zero load vector during flexion-extension. For single MSU investigations the methodology has potential to overcome conventional follower load limitations, most notably via application outside the sagittal plane. This methodology holds promise for future work aimed at reducing the gap between current in-vitro testing and in-vivo circumstances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Retina and Nerve Fiber Layer Thickness in Eyes with Thyroid-Associated Ophthalmopathy.

PubMed

Blum Meirovitch, Sharon; Leibovitch, Igal; Kesler, Anat; Varssano, David; Rosenblatt, Amir; Neudorfer, Meira

2017-05-01

Thyroid-associated ophthalmopathy (TAO) is an inflammatory disease that affects the thyroid gland and the eye orbit. Of patients with TAO, 3%-5% have severe sight-threatening disease due to optic neuropathy Optical coherence tomography (OCT), the non-invasive imaging technology that yields high-resolution cross-sectional images of the retina, provides qualitative and quantitative data on the retina. To apply this technique to quantitatively assess retinal nerve fiber layer (RNFL) and macular ring thicknesses in healthy subjects and in patients with TAO to determine their relationship to the severity of the orbital disease. All patients in the ophthalmology clinic who were diagnosed with TAO and underwent OCT imaging as part of their ocular examination comprised the study group, and healthy patients who volunteered to undergo OCT examination served as controls. Results of the complete ophthalmologic examination and OCT findings were collected from medical files, including the thickness of the RNFL and the macula. The study comprised 21 patients and 41 healthy controls. TAO patients exhibited RNFL thickening and inner macula thinning compared to healthy subjects. Mean RNFL thickness was correlated with the severity of the orbital disease. The OCT findings suggest that the retina is involved in TAO, probably as early as the subclinical stage. This highlights the ability of OCT to identify retinal changes earlier and far more accurately than is detected today, enabling earlier diagnosis and more timely treatment to prevent severe visual sequelae.

Method and apparatus for chemical and topographical microanalysis

NASA Technical Reports Server (NTRS)

Kossakovski, Dmitri A. (Inventor); Baldeschwieler, John D. (Inventor); Beauchamp, Jesse L. (Inventor)

2002-01-01

A scanning probe microscope is combined with a laser induced breakdown spectrometer to provide spatially resolved chemical analysis of the surface correlated with the surface topography. Topographical analysis is achieved by scanning a sharp probe across the sample at constant distance from the surface. Chemical analysis is achieved by the means of laser induced breakdown spectroscopy by delivering pulsed laser radiation to the sample surface through the same sharp probe, and consequent collection and analysis of emission spectra from plasma generated on the sample by the laser radiation. The method comprises performing microtopographical analysis of the sample with a scanning probe, selecting a scanned topological site on the sample, generating a plasma plume at the selected scanned topological site, and measuring a spectrum of optical emission from the plasma at the selected scanned topological site. The apparatus comprises a scanning probe, a pulsed laser optically coupled to the probe, an optical spectrometer, and a controller coupled to the scanner, laser and spectrometer for controlling the operation of the scanner, laser and spectrometer. The probe and scanner are used for topographical profiling the sample. The probe is also used for laser radiation delivery to the sample for generating a plasma plume from the sample. Optical emission from the plasma plume is collected and delivered to the optical spectrometer so that analysis of emission spectrum by the optical spectrometer allows for identification of chemical composition of the sample at user selected sites.

Southern Alaska as an Example of the Long-Term Consequences of Mountain Building Under the Influence of Glaciers

NASA Technical Reports Server (NTRS)

Meigs, Andrew; Sauber, Jeanne

2000-01-01

Southern Alaska is a continent-scale region of ongoing crustal deformation within the Pacific-North American plate boundary zone. Glaciers and glacial erosion have dictated patterns of denudation in the orogen over the last approx. 5 My. The orogen comprises three discrete topographic domains from south to north, respectively: (1) the Chugach/St. Elias Range; (2) the Wrangell Mountains; and (3) the eastern Alaska Range. Although present deformation is distributed across the orogen, much of the shortening and uplift are concentrated in the Chugach/St. Elias Range. A systematic increase in topographic wavelength of the range from east to west reflects east-to-west increases in the width of a shallowly-dipping segment of the plate interface, separation of major upper plate structures, and a decrease in the obliquity of plate motion relative to the plate boundary. Mean elevation decays exponentially from approx. 2500 m to approx. 1100 m from east to west, respectively. Topographic control on the present and past distribution of glaciers is indicated by close correspondence along the range between mean elevation and the modern equilibrium line altitude of glaciers (ELA) and differences in the modern ELA, mean annual precipitation and temperature across the range between the windward, southern and leeward, northern flanks. Net, range- scale erosion is the sum of: (1) primary bedrock erosion by glaciers and (2) erosion in areas of the landscape that are ice-marginal and are deglaciated at glacial minima. Oscillations between glacial and interglacial climates controls ice height and distribution, which, in turn, modulates the locus and mode of erosion in the landscape. Mean topography and the mean position of the ELA are coupled because of the competition between rock uplift, which tends to raise the ELA, and enhanced orographic precipitation accompanying mountain building, which tends to lower the ELA. Mean topography is controlled both by the 60 deg latitude and maritime setting of active deformation and by the feedback between shortening and uplift, glacial erosion, and orographic effects on climate accompanying mountain building.

Elevated blood harmane (1-methyl-9H-pyrido[3,4-b]indole) concentrations in essential tremor.

PubMed

Louis, Elan D; Jiang, Wendy; Pellegrino, Kathryn M; Rios, Eileen; Factor-Litvak, Pam; Henchcliffe, Claire; Zheng, Wei

2008-03-01

Essential tremor (ET) is a widespread late-life neurological disease. Genetic and environmental factors likely play an etiological role. Harmane (1-methyl-9H-pyrido[3,4-b]indole) is a potent tremor-producing neurotoxin. In 2002, we demonstrated elevated blood harmane concentrations in an initial sample of 100 ET cases compared to 100 controls. Between 2002 and 2007, we assembled a new and larger sample of ET cases and controls. We now attempt to replicate our previous findings. Cases and controls were frequency-matched on age, gender, and race. Blood harmane concentrations were quantified by high-performance liquid chromatography. Subjects comprised 150 ET cases and 135 controls (mean age 65.3+/-15.5 vs. 65.5+/-14.2 years, p=0.94). Mean log blood harmane concentration was approximately 50% higher in cases than controls (0.50+/-0.54g(-10)/ml vs. 0.35+/-0.62g(-10)/ml, p=0.038). In a logistic regression analysis, log blood harmane concentration was associated with ET (OR(adjusted) 1.56, 95% CI 1.01-2.42, p=0.04), and odds of ET was 1.90 (95% CI 1.07-3.39, p=0.029) in the highest versus lowest log blood harmane tertile. Log blood harmane was highest in ET cases with familial ET (0.53+/-0.57g(-10)/ml), intermediate in cases with sporadic ET (0.43+/-0.45g(-10)/ml) and lowest in controls (0.35+/-0.62g(-10)/ml) (test for trend, p=0.026). Blood harmane appears to be elevated in ET. The higher concentrations in familial ET suggests that the mechanism may involve genetic factors.

ELEVATED BLOOD HARMANE (1-METHYL-9H-PYRIDO[3,4-B]INDOLE) CONCENTRATIONS IN ESSENTIAL TREMOR

PubMed Central

Louis, Elan D.; Jiang, Wendy; Pellegrino, Kathryn M.; Rios, Eileen; Factor-Litvak, Pam; Henchcliffe, Claire; Zheng, Wei

2008-01-01

Essential tremor (ET) is a widespread late-life neurological disease. Genetic and environmental factors likely play an etiological role. Harmane (1-methyl-9H-pyrido[3,4-b]indole) is a potent tremor-producing neurotoxin. In 2002, we demonstrated elevated blood harmane concentrations in an initial sample of 100 ET cases compared to 100 controls. Between 2002 and 2007, we assembled a new and larger sample of ET cases and controls. We now attempt to replicate our previous findings. Cases and controls were frequency-matched on age, gender, and race. Blood harmane concentrations were quantified by high performance liquid chromatography. Subjects comprised 150 ET cases and 135 controls (mean age 65.3 ± 15.5 vs. 65.5 ± 14.2 years, p = 0.94). Mean log blood harmane concentration was ∼50% higher in cases than controls (0.50 ± 0.54 g -10/ml vs. 0.35 ± 0.62 g-10/ml, p = 0.038). In a logistic regression analysis, log blood harmane concentration was associated with ET (ORadjusted 1.56, 95% CI 1.01 - 2.42, p = 0.04), and odds of ET was 1.90 (95% CI 1.07 - 3.39, p = 0.029) in the highest vs. lowest log blood harmane tertile. Log blood harmane was highest in ET cases with familial ET (0.53 ± 0.57 g -10/ml), intermediate in cases with sporadic ET (0.43 ± 0.45 g -10/ml) and lowest in controls (0.35 ± 0.62 g-10/ml) (test for trend, p = 0.026). Blood harmane appears to be elevated in ET. The higher concentrations in familial ET suggests that the mechanism may involve genetic factors. PMID:18242711

Hepatobiliary Ultrasonographic Abnormalities in Adult Patients with Sickle Cell Anaemia in Steady State in Ile-Ife, Nigeria

PubMed Central

Oguntoye, Oluwatosin O.; Ndububa, Dennis A.; Yusuf, Musah; Bolarinwa, Rahman A.; Ayoola, Oluwagbemiga O.

2017-01-01

Summary Background Sickle cell anaemia (SCA) is associated with structural manifestations in the hepatobiliary axis. This study aimed to investigate the hepatobiliary ultrasonographic abnormalities in adult patients with sickle cell anaemia in steady state attending the Haematology clinic of a federal tertiary health institution in Ile-Ife, Nigeria. Material/Methods Basic demographic data as well as right upper abdominal quadrant ultrasonography of 50 consecutive sickle cell anaemia patients were compared with those of 50 age- and sex-matched subjects with HbAA as controls. Results Each of the study groups (patients and controls) comprised of 21 (42%) males and 29 (58%) females. The age range of the patients was 18–45 years with a mean (±SD) of 27.6±7.607 years, while that of the controls was 21–43 years with a mean (±SD) of 28.0±5.079 years (p=0.746). Amongst the patients, 32 (64%) had hepatomegaly, 15 (30%) cholelithiasis and 3 (6%) biliary sludge. Fourteen (28%) of the patients had normal hepatobiliary ultrasound findings. In the control group, one (2%) person had cholelithiasis, one (2%) biliary sludge, one (2%) fatty liver and none hepatomegaly. Forty-seven (94%) of the controls had normal hepatobiliary ultrasound findings. There was a statistically significant difference in the prevalence of hepatomegaly and cholelithiasis between the patients and controls (p value <0.001 for both comparisons). Conclusions In this study, hepatomegaly, cholelithiasis and biliary sludge were the most common hepatobiliary ultrasound findings in patients with sickle cell anaemia. Ultrasonography is a useful tool for assessing hepatobiliary abnormalities in patients with sickle cell anaemia. PMID:28105246

Clinical evaluation of satisfaction in patients rehabilitated with an immediately loaded implant-supported prosthesis: a controlled prospective study.

PubMed

Scala, Rudy; Cucchi, Alessandro; Ghensi, Paolo; Vartolo, Francesco

2012-01-01

The purpose of this controlled prospective study was to compare the satisfaction of patients rehabilitated with an immediately loaded implant-supported prosthesis and patients rehabilitated with a conventional denture in the mandible. Selected mandibular partially or totally edentulous patients were included in this prospective study. Patients' mandibles were completely rehabilitated with immediately loaded implants supporting a screw-retained full-arch prosthesis (test group) or with a conventional denture (control group). The Satisfaction Profile (SAT-P), which investigates a number of psychologic aspects related to the function and esthetics of the stomatognathic apparatus, was administered to each patient 1 month before and 3 months after provisional prosthetic rehabilitation. The questionnaire comprised four different SAT-P items: quality of eating, eating behavior, mood, and self-confidence. A visual analog scale was used to elicit patient responses. SAT-P item scores were analyzed statistically by means of the Student t test and the chi-square test (or the Mann-Whitney nonparametric test), with P < .05 considered significant. Forty-one patients were consecutively treated with 205 immediately loaded implants supporting a screw-retained full-arch prosthesis (test group); 38 patients were consecutively treated with a conventional denture (control group). Statistically significant differences were observed between the test and control groups for all four SAT-P items. The test group reported greater satisfaction for all items versus the control group. In both groups, the differences between pre- and postrehabilitation values were statistically significant. Each patient was satisfied with their treatment outcomes, but patients who received an implant-supported prosthesis were more satisfied than the patients who received a conventional denture. The results suggest that a screw-retained full-arch prosthesis on immediately loaded implants is a predictable means of enhancing patient satisfaction.

Nonvolatile semiconductor memory having three dimension charge confinement

DOEpatents

Dawson, L. Ralph; Osbourn, Gordon C.; Peercy, Paul S.; Weaver, Harry T.; Zipperian, Thomas E.

1991-01-01

A layered semiconductor device with a nonvolatile three dimensional memory comprises a storage channel which stores charge carriers. Charge carriers flow laterally through the storage channel from a source to a drain. Isolation material, either a Schottky barrier or a heterojunction, located in a trench of an upper layer controllably retains the charge within the a storage portion determined by the confining means. The charge is retained for a time determined by the isolation materials' nonvolatile characteristics or until a change of voltage on the isolation material and the source and drain permit a read operation. Flow of charge through an underlying sense channel is affected by the presence of charge within the storage channel, thus the presences of charge in the memory can be easily detected.

A clinicopathological study of surgically resected lung cancer in patients with usual interstitial pneumonia.

PubMed

Watanabe, Yasutaka; Kawabata, Yoshinori; Koyama, Nobuyuki; Ikeya, Tomohiko; Hoshi, Eishin; Takayanagi, Noboru; Koyama, Shinichiro

2017-08-01

The clinicopathological characteristics of lung cancer with concomitant usual interstitial pneumonia (UIP) are insufficiently understood. This study aimed to elucidate a characteristic pathological feature of lung cancer that develops in patients with UIP, with a focus on the location of its onset. We reviewed surgically obtained specimens, including 547 tumors from 526 patients who underwent lobectomy for lung cancer. Surveyed patients were classified into three groups: patients with UIP (UIP group), patients with lung pathology other than UIP (non-UIP group), and patients without any associated lung pathology (normal group). The histology as well as the lobe and location of the onset of lung cancer were compared among these groups. The peripheral location was subdivided into subpleural, inner and tumor involved centrally secondary to extension. The UIP group comprised 82 patients (male, 71 [87%]; mean age, 71 years; smoking rate, 94%), the non-UIP group comprised 334 patients (male, 267 [80%]; mean age, 69 years; smoking rate, 81%), and the normal group comprised 110 patients (male, 33 [30%]; mean age, 63; smoking rate, 29%). No statistical differences were noted in sex, mean age, or smoking index between the UIP and non-UIP groups. Compared with the non-UIP group, the frequency of squamous cell carcinoma (63% vs. 32%), lower lobe origin (76% vs. 32%), and subpleural location (24% vs. 5%) were significantly higher in the UIP group. Lung cancers in patients with UIP show a predilection for the subpleural region, where UIP is also thought to originate. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fiber optic sensor employing successively destroyed coupled points or reflectors for detecting shock wave speed and damage location

DOEpatents

Weiss, Jonathan D.

1995-01-01

A shock velocity and damage location sensor providing a means of measuring shock speed and damage location. The sensor consists of a long series of time-of-arrival "points" constructed with fiber optics. The fiber optic sensor apparatus measures shock velocity as the fiber sensor is progressively crushed as a shock wave proceeds in a direction along the fiber. The light received by a receiving means changes as time-of-arrival points are destroyed as the sensor is disturbed by the shock. The sensor may comprise a transmitting fiber bent into a series of loops and fused to a receiving fiber at various places, time-of-arrival points, along the receiving fibers length. At the "points" of contact, where a portion of the light leaves the transmitting fiber and enters the receiving fiber, the loops would be required to allow the light to travel backwards through the receiving fiber toward a receiving means. The sensor may also comprise a single optical fiber wherein the time-of-arrival points are comprised of reflection planes distributed along the fibers length. In this configuration, as the shock front proceeds along the fiber it destroys one reflector after another. The output received by a receiving means from this sensor may be a series of downward steps produced as the shock wave destroys one time-of-arrival point after another, or a nonsequential pattern of steps in the event time-of-arrival points are destroyed at any point along the sensor.

Fiber optic sensor employing successively destroyed coupled points or reflectors for detecting shock wave speed and damage location

DOEpatents

Weiss, J.D.

1995-08-29

A shock velocity and damage location sensor providing a means of measuring shock speed and damage location is disclosed. The sensor consists of a long series of time-of-arrival ``points`` constructed with fiber optics. The fiber optic sensor apparatus measures shock velocity as the fiber sensor is progressively crushed as a shock wave proceeds in a direction along the fiber. The light received by a receiving means changes as time-of-arrival points are destroyed as the sensor is disturbed by the shock. The sensor may comprise a transmitting fiber bent into a series of loops and fused to a receiving fiber at various places, time-of-arrival points, along the receiving fibers length. At the ``points`` of contact, where a portion of the light leaves the transmitting fiber and enters the receiving fiber, the loops would be required to allow the light to travel backwards through the receiving fiber toward a receiving means. The sensor may also comprise a single optical fiber wherein the time-of-arrival points are comprised of reflection planes distributed along the fibers length. In this configuration, as the shock front proceeds along the fiber it destroys one reflector after another. The output received by a receiving means from this sensor may be a series of downward steps produced as the shock wave destroys one time-of-arrival point after another, or a nonsequential pattern of steps in the event time-of-arrival points are destroyed at any point along the sensor. 6 figs.

Flux control and one-hundred and eighty degree core systems

DOEpatents

Hsu, John S

2012-11-27

A two-phase or four-phase electric machine includes a first stator part and a second stator part disposed about ninety electrical degrees apart. Stator pole parts are positioned near the first stator part and the second stator part. An injector injects a third-harmonic frequency current that is separate from and not produced by the fundamental current driving the first stator part and the second stator part. The electric angular speed of the third-harmonic rotating field comprises .theta. ##EQU00001## where p comprises the number of pole pairs, .theta. comprises a mechanical angle and t comprise time in seconds.

Electro-optic crystal mosaics for the generation of terahertz radiation

DOEpatents

Carrig, Timothy J.; Taylor, Antoinette J.; Stewart, Kevin R.

1996-01-01

Apparatus for the generation of high energy terahertz radiation is presented and comprises laser means effective to produce subpicosecond optical pulses and a mosaic comprising a plurality of planar electro-optic crystals fastened together edge to edge in the form of a grid. The electro-optic crystals are in optical communication with the subpicosecond optical pulses, and behave as a single large electro-optic crystal, producing high energy terahertz radiation by way of optical rectification.

Electro-optic crystal mosaics for the generation of terahertz radiation

DOEpatents

Carrig, T.J.; Taylor, A.J.; Stewart, K.R.

1996-08-06

Apparatus for the generation of high energy terahertz radiation is presented and comprises laser means effective to produce subpicosecond optical pulses and a mosaic comprising a plurality of planar electro-optic crystals fastened together edge to edge in the form of a grid. The electro-optic crystals are in optical communication with the subpicosecond optical pulses, and behave as a single large electro-optic crystal, producing high energy terahertz radiation by way of optical rectification. 5 figs.

Method of analyzing multiple sample simultaneously by detecting absorption and systems for use in such a method

DOEpatents

Yeung, Edward S.; Gong, Xiaoyi

2004-09-07

The present invention provides a method of analyzing multiple samples simultaneously by absorption detection. The method comprises: (i) providing a planar array of multiple containers, each of which contains a sample comprising at least one absorbing species, (ii) irradiating the planar array of multiple containers with a light source and (iii) detecting absorption of light with a detetion means that is in line with the light source at a distance of at leaat about 10 times a cross-sectional distance of a container in the planar array of multiple containers. The absorption of light by a sample indicates the presence of an absorbing species in it. The method can further comprise: (iv) measuring the amount of absorption of light detected in (iii) indicating the amount of the absorbing species in the sample. Also provided by the present invention is a system for use in the abov metho.The system comprises; (i) a light source comrnpising or consisting essentially of at leaat one wavelength of light, the absorption of which is to be detected, (ii) a planar array of multiple containers, and (iii) a detection means that is in line with the light source and is positioned in line with and parallel to the planar array of multiple contiainers at a distance of at least about 10 times a cross-sectional distance of a container.

Thin film application device and method for coating small aperture vacuum vessels

DOEpatents

Walters, Dean R; Este, Grantley O

2015-01-27

A device and method for coating an inside surface of a vessel is provided. In one embodiment, a coating device comprises a power supply and a diode in electrical communication with the power supply, wherein electrodes comprising the diode reside completely within the vessel. The method comprises reversibly sealing electrodes in a vessel, sputtering elemental metal or metal compound on the surface while maintaining the surface in a controlled atmosphere.

Metabolic and physiologic effects from consuming a hunter-gatherer (Paleolithic)-type diet in type 2 diabetes.

PubMed

Masharani, U; Sherchan, P; Schloetter, M; Stratford, S; Xiao, A; Sebastian, A; Nolte Kennedy, M; Frassetto, L

2015-08-01

The contemporary American diet figures centrally in the pathogenesis of numerous chronic diseases--'diseases of civilization'--such as obesity and diabetes. We investigated in type 2 diabetes whether a diet similar to that consumed by our pre-agricultural hunter-gatherer ancestors ('Paleolithic' type diet) confers health benefits. We performed an outpatient, metabolically controlled diet study in type 2 diabetes patients. We compared the findings in 14 participants consuming a Paleo diet comprising lean meat, fruits, vegetables and nuts, and excluding added salt, and non-Paleolithic-type foods comprising cereal grains, dairy or legumes, with 10 participants on a diet based on recommendations by the American Diabetes Association (ADA) containing moderate salt intake, low-fat dairy, whole grains and legumes. There were three ramp-up diets for 7 days, then 14 days of the test diet. Outcomes included the following: mean arterial blood pressure; 24-h urine electrolytes; hemoglobin A1c and fructosamine levels; insulin resistance by euglycemic hyperinsulinemic clamp and lipid levels. Both groups had improvements in metabolic measures, but the Paleo diet group had greater benefits on glucose control and lipid profiles. Also, on the Paleo diet, the most insulin-resistant subjects had a significant improvement in insulin sensitivity (r = 0.40, P = 0.02), but no such effect was seen in the most insulin-resistant subjects on the ADA diet (r = 0.39, P = 0.3). Even short-term consumption of a Paleolithic-type diet improved glucose control and lipid profiles in people with type 2 diabetes compared with a conventional diet containing moderate salt intake, low-fat dairy, whole grains and legumes.

Versatile spin-polarized electron source

DOEpatents

Jozwiak, Chris; Park, Cheol -Hwan; Gotlieb, Kenneth; Louie, Steven G.; Hussain, Zahid; Lanzara, Alessandra

2015-09-22

One or more embodiments relate generally to the field of photoelectron spin and, more specifically, to a method and system for creating a controllable spin-polarized electron source. One preferred embodiment of the invention generally comprises: method for creating a controllable spin-polarized electron source comprising the following steps: providing one or more materials, the one or more materials having at least one surface and a material layer adjacent to said surface, wherein said surface comprises highly spin-polarized surface electrons, wherein the direction and spin of the surface electrons are locked together; providing at least one incident light capable of stimulating photoemission of said surface electrons; wherein the photon polarization of said incident light is tunable; and inducing photoemission of the surface electron states.

Hydraulically-actuated operating system for an electric circuit breaker

DOEpatents

Barkan, Philip; Imam, Imdad

1978-01-01

This hydraulically-actuated operating system comprises a cylinder, a piston movable therein in an opening direction to open a circuit breaker, and an accumulator for supplying pressurized liquid to a piston-actuating space within the cylinder. A normally-closed valve between the accumulator and the actuating space is openable to allow pressurized liquid from the accumulator to flow through the valve into the actuating space to drive the piston in an opening direction. A vent is located hydraulically between the actuating space and the valve for affording communication between said actuating space and a low pressure region. Flow control means is provided for restricting leakage through said vent to a rate that prevents said leakage from substantially detracting from the development of pressure within said actuatng space during the period from initial opening of the valve to the time when said piston has moved through most of its opening stroke. Following such period and while the valve is still open, said flow control means allows effective leakage through said vent. The accumulator has a limited capacity that results in the pressure within said actuating space decaying promptly to a low value as a result of effective leakage through said vent after the piston has moved through a circuit-breaker opening stroke and while the valve is in its open state. Means is provided for resetting the valve to its closed state in response to said pressure decay in the actuating space.

Eddy current inspection tool. [Patent application

DOEpatents

Petrini, R.R.; Van Lue, D.F.

1980-10-29

A miniaturized inspection tool, for testing and inspection of metal objects in locations with difficult accessibility, which comprises eddy current sensing equipment with a probe coil, and associated coaxial coil cable, oil energizing means, and circuit means responsive to impedance changes in the coil as effected by induced eddy currents in a test object to produce a data output signal proportional to such changes. The coil and cable are slideably received in the utility channel of the flexible insertion tube of a fiberoptic scope. The scope is provided with light transmitting and receiving fiberoptics for viewing through the flexible tube, and articulation means for articulating the distal end of the tube and permitting close control of coil placement relative to a test object. The eddy current sensing equipment includes a tone generator for generating audible signals responsive to the data output signal. In one selected mode of operation, the tone generator responsive to the output signal above a selected level generates a constant single frequency tone for signalling detection of a discontinuity and, in a second selected mode, generates a tone whose frequency is proportional to the difference between the output signal and a predetermined selected threshold level.

Air actuated clutch for four wheel drive vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clohessy, K.E.

1986-12-09

A control system is described for selectively engaging and disengaging a vehicle wheel and a vehicle drive mechanism comprising; a spindle having inside and outside rotative support surfaces, the spindle adapted to be mounted to a vehicle frame, an axle portion rotatably supported on the inside support surface, and drive means for selectively and rotatively driving the axle portion relative to the spindle; a wheel hub assembly adapted to carry a vehicle wheel, the hub assembly rotatively supported on the outside support surface of the spindle; a sealed expansion chamber defined in part by the spindle, the axle portion, themore » hub assembly and a movable wall carried by the hub assembly, venting means venting the outer side of the movable wall to atmospheric pressure, the clutch ring engaged by the movable wall for movement of the clutch ring with movement of the movable wall as induced by a pressure difference generated within the chamber, and pressurizing means for selectively pressurizing and depressurizing the expansion chamber to thereby selectively shift the clutch ring between the positions of interlocking the axle portion and hub assembly and unlocking the axle portion and hub assembly.« less

Linear electronic field time-of-flight ion mass spectrometers

DOEpatents

Funsten, Herbert O.

2010-08-24

Time-of-flight mass spectrometer comprising a first drift region and a second drift region enclosed within an evacuation chamber; a means of introducing an analyte of interest into the first drift region; a pulsed ionization source which produces molecular ions from said analyte of interest; a first foil positioned between the first drift region and the second drift region, which dissociates said molecular ions into constituent atomic ions and emits secondary electrons; an electrode which produces secondary electrons upon contact with a constituent atomic ion in second drift region; a stop detector comprising a first ion detection region and a second ion detection region; and a timing means connected to the pulsed ionization source, to the first ion detection region, and to the second ion detection region.

Frequency mixing crystal

DOEpatents

Ebbers, Christopher A.; Davis, Laura E.; Webb, Mark

1992-01-01

In a laser system for converting infrared laser light waves to visible light comprising a source of infrared laser light waves and means of harmoic generation associated therewith for production of light waves at integral multiples of the frequency of the original wave, the improvement of said means of harmonic generation comprising a crystal having the chemical formula X.sub.2 Y(NO.sub.3).sub.5 .multidot.2 nZ.sub.2 o wherein X is selected from the group consisting of Li, Na, K, Rb, Cs, and Tl; Y is selected from the group consisting of Sc, Y, La, Ce, Nd, Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Al, Ga, and In; Z is selected from the group consisting of H and D; and n ranges from 0 to 4.

Erythropoetin treatment can increase 2,3-diphosphoglycerate levels in red blood cells.

PubMed

Birgegård, G; Sandhagen, B

2001-01-01

Some patients experience an improved well-being during treatment with recombinant human erythropoietin even with an unchanged Hb level. We have hypothesized that this may not be only a placebo effect. 2,3-diphosphoglycerate (2,3-DPG) in red blood cells increases in response to anaemia/hypoxia and causes a shift of the oxygen dissociation curve, allowing a more effective oxygen delivery. We have investigated red cell 2,3-DPG concentrations during erythropoietin treatment in healthy volunteers as a mediator of a possible physiological explanation. Thirteen healthy subjects with no iron deficiency were recruited and randomly assigned to a treatment group comprising five males and three females and a control group including three males and two females. The treatment group was treated with erythropoietin (Recormon), 20 IE/kg subcutaneously three times/week for 4 weeks. Blood samples were collected at each injection day and 10 days after the last injection and at corresponding times in the control group. B-Hb, red cell 2,3-DPG and P50 were measured by standard techniques and oxygen-releasing capacity was calculated. due to the sampling (26 ml each time, three times/week) the mean Hb level was lowered from 140.5 +/- 5.9 to 128.6 +/- 10.4 g/L in the control group whereas the erythropoietin treatment group maintained a mean Hb level of about 142 g/L (p<0.002). The 2,3-DPG mean level curve as well as that for oxygen releasing capacity also differed significantly between the two groups (p < 0.002), the treatment group showing higher levels. treatment with erythropoietin causes an increase in red cell 2,3-DPG levels.

Cognitive performance of patients with chronic heart failure on sacubitril/valsartan : A retrospective cohort study.

PubMed

De Vecchis, R; Ariano, C; Di Biase, G; Noutsias, M

2018-02-15

Sacubitril, a neprilysin inhibitor in the combination molecule sacubitril/valsartan, slows down degradation of endogenous natriuretic peptides, thereby enhancing their beneficial cardiovascular effects. However, sacubitril might also promote neuronal dysfunction and cognitive impairment in patients with chronic heart failure (CHF) treated with sacubitril/valsartan, due to possible neprilysin inhibition at the level of Central Nervous System. A retrospective cohort study was undertaken to detect the effects exerted by sacubitril/valsartan on cognitive function in CHF patients. The patients' clinical data were examined for information provided in the Mini-Mental State Examination (MMSE), which was routinely administered during clinical visits at two centers from 15 March to 31 October 2017. Patients in the sacubitril/valsartan group had a clinical history of at least 3 months of continuous sacubitril/valsartan administration. The control group comprised CHF patients on conventional therapy not taking sacubitril/valsartan. In the between-group comparison, patients were matched for mean age, educational level, sex, NYHA class, and comorbidities. In the present retrospective study only patients in NYHA class II-III were enrolled. The mean MMSE score was 22.72 ± 2.68 (mean ± standard deviation [SD]) in the sacubitril/valsartan group (n = 51 patients) vs. 21.96 ± 2.73 (mean ± SD) in the control group (n = 51; p = 0.1572, independent samples t-test). Thus, a similar mild-to-moderate impairment in cognitive performance was found in the comparison between the two groups. In our study, we did not find any evidence of the alleged harmful influence of sacubitril/valsartan on cognitive function. Patients taking sacubitril/valsartan for at least 3 months had similar mean MMSE scores to control subjects.

The High Direct Medical Costs of Prader-Willi Syndrome.

PubMed

Shoffstall, Andrew J; Gaebler, Julia A; Kreher, Nerissa C; Niecko, Timothy; Douglas, Diah; Strong, Theresa V; Miller, Jennifer L; Stafford, Diane E; Butler, Merlin G

2016-08-01

To assess medical resource utilization associated with Prader-Willi syndrome (PWS) in the US, hypothesized to be greater relative to a matched control group without PWS. We used a retrospective case-matched control design and longitudinal US administrative claims data (MarketScan) during a 5-year enrollment period (2009-2014). Patients with PWS were identified by Classification of Diseases, Ninth Revision, Clinical Modification diagnosis code 759.81. Controls were matched on age, sex, and payer type. Outcomes included total, outpatient, inpatient and prescription costs. After matching and application of inclusion/exclusion criteria, we identified 2030 patients with PWS (1161 commercial, 38 Medicare supplemental, and 831 Medicaid). Commercially insured patients with PWS (median age 10 years) had 8.8-times greater total annual direct medical costs than their counterparts without PWS (median age 10 years: median costs $14 907 vs $819; P < .0001; mean costs: $28 712 vs $3246). Outpatient care comprised the largest portion of medical resource utilization for enrollees with and without PWS (median $5605 vs $675; P < .0001; mean $11 032 vs $1804), followed by mean annual inpatient and medication costs, which were $10 879 vs $1015 (P < .001) and $6801 vs $428 (P < .001), respectively. Total annual direct medical costs were ∼42% greater for Medicaid-insured patients with PWS than their commercially insured counterparts, an increase partly explained by claims for Medicaid Waiver day and residential habilitation. Direct medical resource utilization was considerably greater among patients with PWS than members without the condition. This study provides a first step toward quantifying the financial burden of PWS posed to individuals, families, and society. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Discrete wavelength-locked external cavity laser

NASA Technical Reports Server (NTRS)

Pilgrim, Jeffrey S. (Inventor); Silver, Joel A. (Inventor)

2005-01-01

An external cavity laser (and method of generating laser light) comprising: a laser light source; means for collimating light output by the laser light source; a diffraction grating receiving collimated light; a cavity feedback mirror reflecting light received from the diffraction grating back to the diffraction grating; and means for reliably tuning the external cavity laser to discrete wavelengths.

CONDENSATION CAN

DOEpatents

Booth, E.T. Jr.; Pontius, R.B.; Jacobsohn, B.A.; Slade, C.B.

1962-03-01

An apparatus is designed for condensing a vapor to a solid at relatively low back pressures. The apparatus comprises a closed condensing chamber, a vapor inlet tube extending to the central region of the chamber, a co-axial tubular shield surrounding the inlet tube, means for heating the inlet tube at a point outside the condensing chamber, and means for refrigeratirg the said chamber. (AEC)

Solar converter system with thermal overload protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popovich, J.M.; Thornbury, T.R.

1979-10-02

A solar energy conversion system comprises: (a) a solar converter in which liquid absorbs solar radiation, the liquid being solar energy absorptive; (b) first means to circulate said liquid for flow through the converter; and (c) means to effect removal of liquid from the converter in response to an undesirable operation condition in said system. 12 claims.

NEUTRONIC REACTOR

DOEpatents

Fermi, E.; Zinn, W.H.; Anderson, H.L.

1958-09-16

Means are presenied for increasing the reproduction ratio of a gaphite- moderated neutronic reactor by diminishing the neutron loss due to absorption or capture by gaseous impurities within the reactor. This means comprised of a fluid-tight casing or envelope completely enclosing the reactor and provided with a valve through which the casing, and thereby the reactor, may be evacuated of atmospheric air.

Rotating superconductor magnet for producing rotating lobed magnetic field lines

DOEpatents

Hilal, Sadek K.; Sampson, William B.; Leonard, Edward F.

1978-01-01

This invention provides a rotating superconductor magnet for producing a rotating lobed magnetic field, comprising a cryostat; a superconducting magnet in the cryostat having a collar for producing a lobed magnetic field having oppositely directed adjacent field lines; rotatable support means for selectively rotating the superconductor magnet; and means for energizing the superconductor magnet.

Somatotype characteristics of female patients with type 2 diabetes mellitus.

PubMed

Baltadjiev, Atanas G

2013-01-01

The AIM of the present study was to determine the somatotype of females patients with type 2 diabetes mellitus. Two-hundreds and twelve female patients with type 2 diabetes mellitus were measured. The patients were of Bulgarian ethnicity and were divided into two age groups: Group 1: 40-60 years of age and Group 2: 61-80 years of age. The control group comprised healthy females of Bulgarian ethnicity without any metabolic, neoplastic, or other disease divided into age matched groups. Measurements obtained directly were height, body weight, biepicondylar width of humerus, biepicondylar width of femur, arm circumference in relaxed state, arm circumference in contracted state, and calf circumference. Skin folds: subscapular, suprailiac, over triceps and calf. Parameters calculated: the components of the Heath-Carter anthrpometric somatotype. The mean somatotype of 40-60-year-old female diabetics was mesomorph endomorph, (meso 6.09; endo 6.59; ecto 1.57). The mean somatotype of 40-60-year-old female controls was mesomorphic endomorph (meso 5.65; endo 6.82; ecto 2.75). The mean somatotype of 61-80-year-old diabetic females was endomorphic mesomorph (endo-mesomorph), (meso 9.41; endo 5.39; ecto 1.55). The mean somatotype of 61-80-year-old female controls was mesomorph-endomorph (meso 6.70; endo 6.66; ecto 2.95). Between-age comparison of female diabetics: the endomorph component dominated in the group of 40-60-year-old patients, and the mesomorph component dominated in the group of 61-80-year-old patients. In both groups ectomorphy markedly lagged behind. The mean somatotype of diabetic females aged 40-60 years is mesomoph-endomorph; it differs from the mesomorphic mesomorph somatotype of the control subjects, Endomorphy and mesomorphy dominate clearly, and ectomorphy significantly lags behind. This was the reason we get a distorted somatoplot with a sharp shift to endomorphy and mesomorhpy. The mean somatotype of diabetic women aged 60-80 years was endomorphic mesomorphy with the mesomorphy component leading. It differed from the somatotype of the controls, where mesomorphy and endomorphy scored equally (mesomorph-endomorph). The somatotype of female diabetics suggests that they have a relatively massive skeleton with well-developed muscles and greater body weight relative to height. Unlike the results of studies in other countries presenting with markedly dominating endomorphy, in our study the Bulgarian diabetic females presented with dominating mesomorphy. This can be regarded as a peculiarity of the Bulgarian diabetic patients. The somatotype of the Bulgarian diabetic females is more favorable on the risk, course and prognosis of the disease.

On-board processing satellite network architecture and control study

NASA Technical Reports Server (NTRS)

Campanella, S. Joseph; Pontano, Benjamin A.; Chalmers, Harvey

1987-01-01

The market for telecommunications services needs to be segmented into user classes having similar transmission requirements and hence similar network architectures. Use of the following transmission architecture was considered: satellite switched TDMA; TDMA up, TDM down; scanning (hopping) beam TDMA; FDMA up, TDM down; satellite switched MF/TDMA; and switching Hub earth stations with double hop transmission. A candidate network architecture will be selected that: comprises multiple access subnetworks optimized for each user; interconnects the subnetworks by means of a baseband processor; and optimizes the marriage of interconnection and access techniques. An overall network control architecture will be provided that will serve the needs of the baseband and satellite switched RF interconnected subnetworks. The results of the studies shall be used to identify elements of network architecture and control that require the greatest degree of technology development to realize an operational system. This will be specified in terms of: requirements of the enabling technology; difference from the current available technology; and estimate of the development requirements needed to achieve an operational system. The results obtained for each of these tasks are presented.

Control logic for exhaust gas driven turbocharger

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adeff, G.A.

1991-12-31

This patent describes a method of controlling an exhaust gas driven turbocharger supplying charge air for an internal combustion engine powering vehicle, the turbocharger being adjustable from a normal mode to a power mode in which the charge air available to the engine during vehicle acceleration is increased over that available when the turbocharger is in the normal mode, the vehicle including engine power control means switchable by the vehicle operator from a normal mode to a power mode so that the vehicle operator may selectively elect either the normal mode or the power mode, comprising the steps of measuringmore » the speed of the vehicle, permitting the vehicle operator to elect either the power mode or the normal mode for a subsequent vehicle acceleration, and then adjusting the turbocharger to the power mode when the speed of the vehicle is less than a predetermined reference speed and the vehicle operator has elected to power mode to increase the charge air available to the engine and thereby increasing engine power on a subsequent acceleration of the vehicle.« less

A two DoF finger for a biomechatronic artificial hand.

PubMed

Carrozza, M C; Massa, B; Dario, P; Zecca, M; Micera, S; Pastacaldi, P

2002-01-01

Current prosthetic hands are basically simple grippers with one or two degrees of freedom, which barely restore the capability of the thumb-index pinch. Although most amputees consider this performance as acceptable for usual tasks, there is ample room for improvement by exploiting recent progresses in mechatronics design and technology. We are developing a novel prosthetic hand featured by multiple degrees of freedom, tactile sensing capabilities, and distributed control. Our main goal is to pursue an integrated design approach in order to fulfill critical requirements such as cosmetics, controllability, low weight, low energy consumption and noiselessness. This approach can be synthesized by the definition "biomechatronic design", which means developing mechatronic systems inspired by living beings and able to work harmoniously with them. This paper describes the first implementation of one single finger of a future biomechatronic hand. The finger has a modular design, which allows to obtain hands with different degrees of freedom and grasping capabilities. Current developments include the implementation of a hand comprising three fingers (opposing thumb, index and middle) and an embedded controller.