Comparative Evaluation of Energy Measurement Models for Transit Systems

DOT National Transportation Integrated Search

1984-02-01

Recent advances in solid state control technology have led to chopper-controlled propulsion systems in urban rail transit applications. Such systems offer the potential for superior train performance through increased train propulsion efficiency and ...

Description of the Large Gap Magnetic Suspension System (LGMSS) ground-based experiment

NASA Technical Reports Server (NTRS)

Groom, Nelson J.

1991-01-01

A description of the Large Gap Magnetic Suspension System (LGMSS) ground-based experiment is presented. The LGMSS provides five degrees of freedom control of a cylindrical suspended element which is levitated above a floor-mounted array of air core electromagnets. The uncontrolled degree of freedom is rotation about the long axis of the cylinder (roll). Levitation and control forces are produced on a permanent magnet core which is embedded in the cylinder. The cylinder also contains light emitting diodes (LEDs), assorted electrons, and a power supply. The LEDs provide active targets for an optical position measurement system which is being developed in-house at the Langley Research Center. The optical position measurement system will provide six degrees of freedom position information for the LGMSS control system.

The LED and fiber based calibration system for the photomultiplier array of SNO+

NASA Astrophysics Data System (ADS)

Seabra, L.; Alves, R.; Andringa, S.; Bradbury, S.; Carvalho, J.; Clark, K.; Coulter, I.; Descamps, F.; Falk, L.; Gurriana, L.; Kraus, C.; Lefeuvre, G.; Maio, A.; Maneira, J.; Mottram, M.; Peeters, S.; Rose, J.; Sinclair, J.; Skensved, P.; Waterfield, J.; White, R.; Wilson, J.; SNO+ Collaboration

2015-02-01

A new external LED/fiber light injection calibration system was designed for the calibration and monitoring of the photomultiplier array of the SNO+ experiment at SNOLAB. The goal of the calibration system is to allow an accurate and regular measurement of the photomultiplier array's performance, while minimizing the risk of radioactivity ingress. The choice in SNO+ was to use a set of optical fiber cables to convey into the detector the light pulses produced by external LEDs. The quality control was carried out using a modified test bench that was used in QC of optical fibers for TileCal/ATLAS. The optical fibers were characterized for transmission, timing and angular dispersions. This article describes the setups used for the characterization and quality control of the system based on LEDs and optical fibers and their results.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thurmond, Kyle; Loparo, Zachary; Partridge, Jr., William P.

Here, a sensor was developed for simultaneous measurements of carbon monoxide (CO) and carbon dioxide (CO 2) fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact light-emitting diodes (LEDs) that emit in the 3–5 µm wavelength range. An affordable, fast response sensor that can measure these gases has a broad application that can lead to more efficient, fuel-flexible engines and regulation of harmful emissions. Light emission from LEDs is spectrally broader and more spatially divergent when compared to that of lasers, which presented many design challenges. Optical design studies addressed some of the non-ideal characteristics ofmore » the LED emissions. Measurements of CO and CO 2 were conducted using their fundamental absorption bands centered at 4.7 µm and 4.3 µm, respectively, while a 3.6 µm reference LED was used to account for scattering losses (due to soot, window deposits, etc.) common to the three measurement LEDs. Instrument validation and calibration was performed using a laboratory flow cell and bottled-gas mixtures. The sensor was able to detect CO 2 and CO concentration changes as small as 30 ppm and 400 ppm, respectively. Because of the many control and monitor species with infra-red absorption features, which can be measured using the strategy described, this work demonstrates proof of concept for a wider range of fast (250 Hz) and low-cost sensors for gas measurement and process monitoring.« less

Active ocular vergence improves postural control in elderly as close viewing distance with or without a single cognitive task.

PubMed

Matheron, Eric; Yang, Qing; Delpit-Baraut, Vincent; Dailly, Olivier; Kapoula, Zoï

2016-01-01

Performance of the vestibular, visual, and somatosensory systems decreases with age, reducing the capacity of postural control, and increasing the risk of falling. The purpose of this study is to measure the effects of vision, active vergence eye movements, viewing distance/vergence angle and a simple cognitive task on postural control during an upright stance, in completely autonomous elderly individuals. Participated in the study, 23 elderly subjects (73.4 ± 6.8 years) who were enrolled in a center dedicated to the prevention of falling. Their body oscillations were measured with the DynaPort(®) device, with three accelerometers, placed at the lumbosacral level, near the center of mass. The conditions were the following: eyes open fixating on LED at 20 cm or 150 cm (vergence angle 17.0° and 2.3° respectively) with or without additional cognitive tasks (counting down from one hundred), performing active vergence by alternating the fixation between the far and the near LED (convergence and divergence), eyes closed after having fixated the far LED. The results showed that the postural stability significantly decreased when fixating on the LED at a far distance (weak convergence angle) with or without cognitive tasks; active convergence-divergence between the LEDs improved the postural stability while eye closure decreased it. The privilege of proximity (with increased convergence at near), previously established with foot posturography, is shown here to be valid for accelerometry with the center of mass in elderly. Another major result is the beneficial contribution of active vergence eye movements to better postural stability. The results bring new perspectives for the role of eye movement training to preserve postural control and autonomy in elderly. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

LED lamp power management system and method

DOEpatents

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

2013-03-19

An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

Erosion control for highway applications : phase I, review and synthesis of literature.

DOT National Transportation Integrated Search

2002-05-01

The project described herein has led to a convenient, computer-based expert system for : identifying and evaluating potentially effective erosion- and sedimentation-control : measures for use in roadway construction throughout Iowa and elsewhere in t...

A Light-Emitting Diode- (LED-) Based Absorption Sensor for Simultaneous Detection of Carbon Monoxide and Carbon Dioxide.

PubMed

Thurmond, Kyle; Loparo, Zachary; Partridge, William; Vasu, Subith S

2016-06-01

A sensor was developed for simultaneous measurements of carbon monoxide (CO) and carbon dioxide (CO2) fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact light-emitting diodes (LEDs) that emit in the 3-5 µm wavelength range. An affordable, fast response sensor that can measure these gases has a broad application that can lead to more efficient, fuel-flexible engines and regulation of harmful emissions. Light emission from LEDs is spectrally broader and more spatially divergent when compared to that of lasers, which presented many design challenges. Optical design studies addressed some of the non-ideal characteristics of the LED emissions. Measurements of CO and CO2 were conducted using their fundamental absorption bands centered at 4.7 µm and 4.3 µm, respectively, while a 3.6 µm reference LED was used to account for scattering losses (due to soot, window deposits, etc.) common to the three measurement LEDs. Instrument validation and calibration was performed using a laboratory flow cell and bottled-gas mixtures. The sensor was able to detect CO2 and CO concentration changes as small as 30 ppm and 400 ppm, respectively. Because of the many control and monitor species with infra-red absorption features, which can be measured using the strategy described, this work demonstrates proof of concept for a wider range of fast (250 Hz) and low-cost sensors for gas measurement and process monitoring. © The Author(s) 2016.

A new method of field MRTD test

NASA Astrophysics Data System (ADS)

Chen, Zhibin; Song, Yan; Liu, Xianhong; Xiao, Wenjian

2014-09-01

MRTD is an important indicator to measure the imaging performance of infrared camera. In the traditional laboratory test, blackbody is used as simulated heat source which is not only expensive and bulky but also difficult to meet field testing requirements of online automatic infrared camera MRTD. To solve this problem, this paper introduces a new detection device for MRTD, which uses LED as a simulation heat source and branded plated zinc sulfide glass carved four-bar target as a simulation target. By using high temperature adaptability cassegrain collimation system, the target is simulated to be distance-infinite so that it can be observed by the human eyes to complete the subjective test, or collected to complete objective measurement by image processing. This method will use LED to replace blackbody. The color temperature of LED is calibrated by thermal imager, thereby, the relation curve between the LED temperature controlling current and the blackbody simulation temperature difference is established, accurately achieved the temperature control of the infrared target. Experimental results show that the accuracy of the device in field testing of thermal imager MRTD can be limited within 0.1K, which greatly reduces the cost to meet the project requirements with a wide application value.

LED-based endoscopic light source for spectral imaging

NASA Astrophysics Data System (ADS)

Browning, Craig M.; Mayes, Samuel; Favreau, Peter; Rich, Thomas C.; Leavesley, Silas J.

2016-03-01

Colorectal cancer is the United States 3rd leading cancer in death rates.1 The current screening for colorectal cancer is an endoscopic procedure using white light endoscopy (WLE). There are multiple new methods testing to replace WLE, for example narrow band imaging and autofluorescence imaging.2 However, these methods do not meet the need for a higher specificity or sensitivity. The goal for this project is to modify the presently used endoscope light source to house 16 narrow wavelength LEDs for spectral imaging in real time while increasing sensitivity and specificity. The process to do such was to take an Olympus CLK-4 light source, replace the light and electronics with 16 LEDs and new circuitry. This allows control of the power and intensity of the LEDs. This required a larger enclosure to house a bracket system for the solid light guide (lightpipe), three new circuit boards, a power source and National Instruments hardware/software for computer control. The results were a successfully designed retrofit with all the new features. The LED testing resulted in the ability to control each wavelength's intensity. The measured intensity over the voltage range will provide the information needed to couple the camera for imaging. Overall the project was successful; the modifications to the light source added the controllable LEDs. This brings the research one step closer to the main goal of spectral imaging for early detection of colorectal cancer. Future goals will be to connect the camera and test the imaging process.

Spectral and Power Stability Tests of Deep UV LEDs for AC Charge Management

NASA Astrophysics Data System (ADS)

Sun, Ke-Xun; Higuchi, Sei; Goh, Allex; Allard, Brett; Gill, Dale; Buchman, Saps; Byer, Robert

2006-11-01

Deep ultraviolet (UV) LEDs have recently been used in AC charge management experiments to support gravitational reference sensors for future space missions. The UV LED based charge management system offers compact size, light weight, and low power consumption compared to plasma sources. The AC charge management technique, which is enabled by easy modulation of UV LED output, achieves higher dynamic range for charge control. Further, the high modulation frequency, which is out of the gravitational wave detection band, reduces disturbances to the proof mass. However, there is a need to test and possibly improve the lifetime of UV LEDs, which were developed only a year ago. We have initiated a series of spectral and power stability tests for UV LEDs and designed experiments according to the requirements of AC charge management. We operate UV LEDs with a modulated current drive and maintain the operating temperature at 22 °C,28 similar to the LISA spacecraft working condition. The testing procedures involve measuring the baseline spectral shape and output power level prior to the beginning of the tests and then re-measuring the same quantities periodically. As of the date of submission (August 28th, 2006), we have operated a UV LED for more than 2,700 hours.

Light Emitting Diodes and Astronomical Environments: Results from in situ Field Measurements

NASA Astrophysics Data System (ADS)

Craine, Brian L.; Craine, Eric R.

2015-05-01

Light emitting diode (LED) light fixtures are rapidly becoming industry standards for outdoor lighting. They are promoted on the strength of long lifetimes (hence economic efficiencies), low power requirements, directability, active brightness controls, and energy efficiency. They also tend to produce spectral shifts that are undesirable in astronomical settings, but which can be moderated by filters. LED lighting for continuous roadway and parking lot lighting is particularly popular, and many communities are in the process of retrofitting Low Pressure Sodium (LPS) and other lights by tens of thousands of new LED fixtures at a time. What is the impact of this process on astronomical observatories and on dark skies upon which amateur astronomers rely? We bypass modeling and predictions to make actual measurements of these lights in the field. We report on original ground, airborne, and satellite observations of LED lights and discuss their light budgets, zenith angle functions, and impacts on observatory environs.

UV LED charge control of an electrically isolated proof mass in a Gravitational Reference Sensor configuration at 255 nm

NASA Astrophysics Data System (ADS)

Balakrishnan, Karthik; Sun, Ke-Xun

2012-07-01

Precise control over the potential of an electrically isolated proof mass is necessary for the operation of devices such as a Gravitational Reference Sensor (GRS) and satellite missions such as LISA. We show that AlGaN UV LEDs operating at 255 nm are an effective substitute for Mercury vapor lamps used in previous missions because of their ability to withstand space qualification levels of vibration and thermal cycling. After 27 thermal and thermal vacuum cycles and 9 minutes of 14.07 g RMS vibration, there is less than 3% change in current draw, less than 15% change in optical power, and no change in spectral peak or FWHM (full width at half maximum). We also demonstrate UV LED stimulated photoemission from a wide variety of thin film carbide proof mass coating candidates (SiC, Mo2C, TaC, TiC, ZrC) that were applied using electron beam evaporation on an Aluminum 6061-T6 substrate. All tested carbide films have measured quantum efficiencies of 3.8-6.8*10^-7 and reflectivities of 0.11-0.15, which compare favorably with the properties of previously used gold films. We demonstrate the ability to control proof mass potential on an 89 mm diameter spherical proof mass over a 20 mm gap in a GRS-like configuration. Proof mass potential was measured via a non-contact DC probe, which would allow control without introducing dynamic forcing of the spacecraft. Finally we provide a look ahead to an upcoming technology demonstration mission of UV LEDs and future applications toward charge control of electrically isolated proof masses.

Acute effects of pea protein and hull fibre alone and combined on blood glucose, appetite, and food intake in healthy young men--a randomized crossover trial.

PubMed

Mollard, Rebecca C; Luhovyy, Bohdan L; Smith, Christopher; Anderson, G Harvey

2014-12-01

Whether pulse components can be used as value-added ingredients in foods formulated for blood glucose (BG) and food intake (FI) control requires investigation. The objective of this study was to examine of the effects of pea components on FI at an ad libitum meal, as well as appetite and BG responses before and after the meal. In a repeated-measures crossover trial, men (n = 15) randomly consumed (i) pea hull fibre (7 g), (ii) pea protein (10 g), (iii) pea protein (10 g) plus hull fibre (7 g), (iv) yellow peas (406 g), and (v) control. Pea hull fibre and protein were served with tomato sauce and noodles, while yellow peas were served with tomato sauce. Control was noodles and tomato sauce. FI was measured at a pizza meal (135 min). Appetite and BG were measured pre-pizza (0-135 min) and post-pizza (155-215 min). Protein plus fibre and yellow peas led to lower pre-pizza BG area under the curve compared with fibre and control. At 30 min, BG was lower after protein plus fibre and yellow peas compared with fibre and control, whereas at 45 and 75 min, protein plus fibre and yellow peas led to lower BG compared with fibre (p < 0.05). Following the pizza meal (155 min), yellow peas led to lower BG compared with fibre (p < 0.05). No differences were observed in FI or appetite. This trial supports the use of pea components as value-added ingredients in foods designed to improve glycemic control.

Effect of spinning workouts on affect.

PubMed

Szabo, Attila; Gáspár, Zoltán; Kiss, Nikolett; Radványi, Alexandra

2015-06-01

Numerous physical exercises trigger positive changes in affect after relatively short workouts. Spinning, also known as indoor-cycling, is a very popular form of exercise, especially among women, but its impact on affect have not been examined to date. The purpose of the current work was to investigate the possible benefits of spinning on affect in self-controlled and in instructor-led exercise sessions. Using baseline measures and pre- to post-exercise design with a psychometrically validated questionnaire, the net effects of spinning (without music) on positive- and negative-affect were measured in two exercise conditions: (1) self-controlled workout (i.e. without an instructor) and (2) instructor-led workout. After both conditions, 18 women rated the extent which they enjoyed the exercise session on a 10-point Likert scale. The findings revealed that positive affect increased while negative affect decreased after both workouts. Exerted effort, measured through the heart rate, did not differ between the two conditions. However, participants enjoyed more the instructor-led exercise session than the self-regulated workout (effect size, Cohen's d = 0.93). This research reveals that spinning improves post-exercise affect, even without music and regardless of instructor's presence. Therefore, it demonstrates the net benefits of this popular exercise on affect.

Structured nurse-led follow-up for patients after discharge from the intensive care unit: Prospective quasi-experimental study.

PubMed

Jónasdóttir, Rannveig J; Jones, Christina; Sigurdsson, Gisli H; Jónsdóttir, Helga

2018-03-01

The aim of this study was to describe a structured 3-month nurse-led follow-up of patients after discharge from intensive care and measure its effects on health status. Patients requiring intensive care stay frequently have lengthy and incomplete recovery suggesting need for additional support. The effects of intensive care nurse-led follow-up have not been sufficiently elucidated. A prospective, quasi-experimental study of patients who received structured nurse-led follow-up from intensive care nurses after discharge from intensive care until 3 months afterwards. The control group received usual care. Of 574 patients assessed for eligibility, from November 2012 - May 2015, 168 were assigned to the experimental group (N = 73) and the control group (N = 75). Primary outcome was health status, measured with eight scales of Short Form-36v2, before the intensive care admission and at four time points until 12 months after intensive care. A mixed effect model tested differences between the groups over time. Criteria for Reporting Development and Evaluation of Complex Interventions 2 guideline, guided the reporting of the intervention. The structured nurse-led follow-up did not improve patients' health status compared with usual care (mixed effect model, p = .078-.937). The structured nurse-led follow-up did not reveal an effect on the intensive care patients studied. Further examination of intensive care nurse-led follow-up is needed, taking into account the heterogeneity of the patient population, variations in length of ward stay, patients' health care needs during the first week at home after discharge from general ward and health status before intensive care admission. © 2017 John Wiley & Sons Ltd.

Position Paper: NO equals x Measurement

ERIC Educational Resources Information Center

Hauser, Thomas R.; Shy, Carl M.

1972-01-01

Doubts about the accuracy of measured concentrations of nitrogen dioxide (NO 2) in ambient air have led the Environmental Protection Agency to reassess both the analytical technique and the extent to which nitrogen oxides (NO equals x) control will need to satisfy federal laws. (BL)

Operation of controls on consumer products by physically impaired users.

PubMed

Kanis, H

1993-06-01

The self-reliance of the physically impaired can be seriously jeopardized by their inability to operate everyday products, especially if both upper extremities are impaired. To determine the difficulties impaired users encounter in operating consumer product controls, on-site video recordings were made of subjects suffering from arthritis or a muscular disease. Subjects' force exertion was compared with that of a group of nonimpaired users. The resulting inventory allowed the analysis of the manipulation problems faced by impaired subjects and the development of design recommendations. In this study the force exerted by the subjects and that required to operate the controls were measured. A comparison of the results of these force measurements led to a number of conclusions. This study led to the following design recommendations: the amount of force required to operate controls should be kept as low as possible; the user should not be required to make two manipulations at the same time, such as simultaneously pushing and rotating a control device; pushing is preferable to rotating; and there should be a great degree of freedom to manipulate controls.

Ground testing and flight demonstration of charge management of insulated test masses using UV-LED electron photoemission

NASA Astrophysics Data System (ADS)

Saraf, Shailendhar; Buchman, Sasha; Balakrishnan, Karthik; Lui, Chin Yang; Soulage, Michael; Faied, Dohy; Hanson, John; Ling, Kuok; Jaroux, Belgacem; Suwaidan, Badr Al; AlRashed, Abdullah; Al-Nassban, Badr; Alaqeel, Faisal; Harbi, Mohammed Al; Salamah, Badr Bin; Othman, Mohammed Bin; Qasim, Bandar Bin; Alfauwaz, Abdulrahman; Al-Majed, Mohammed; DeBra, Daniel; Byer, Robert

2016-12-01

The UV-LED mission demonstrates the precise control of the potential of electrically isolated test masses. Test mass charge control is essential for the operation of space accelerometers and drag-free sensors which are at the core of geodesy, aeronomy and precision navigation missions as well as gravitational wave experiments and observatories. Charge management using photoelectrons generated by the 254 nm UV line of Hg was first demonstrated on Gravity Probe B and is presently part of the LISA Pathfinder technology demonstration. The UV-LED mission and prior ground testing demonstrates that AlGaN UVLEDs operating at 255 nm are superior to Hg lamps because of their smaller size, lower power draw, higher dynamic range, and higher control authority. We show laboratory data demonstrating the effectiveness and survivability of the UV-LED devices and performance of the charge management system. We also show flight data from a small satellite experiment that was one of the payloads on KACST’s SaudiSat-4 mission that demonstrates ‘AC charge control’ (UV-LEDs and bias are AC modulated with adjustable relative phase) between a spherical test mass and its housing. The result of the mission brings the UV-LED device Technology Readiness Level (TRL) to TRL-9 and the charge management system to TRL-7. We demonstrate the ability to control the test mass potential on an 89 mm diameter spherical test mass over a 20 mm gap in a drag-free system configuration, with potential measured using an ultra-high impedance contact probe. Finally, the key electrical and optical characteristics of the UV-LEDs showed less than 7.5% change in performance after 12 months in orbit.

Effectiveness of nurse-led cardiac clinics in adult patients with a diagnosis of coronary heart disease.

PubMed

Page, Tamara; Lockwood, Craig; Conroy-Hiller, Tiffany

2005-02-01

Background  Coronary heart disease is the major cause of illness and death in Western countries and this is likely to increase as the average age of the population rises. Consumers with established coronary heart disease are at the highest risk of experiencing further coronary events. Lifestyle measures can contribute significantly to a reduction in cardiovascular mortality in established coronary heart disease. Improved management of cardiac risk factors by providing education and referrals as required has been suggested as one way of maintaining quality care in patients with established coronary heart disease. There is a need to ascertain whether or not nurse-led clinics would be an effective adjunct for patients with coronary heart disease to supplement general practitioner advice and care. Objectives  The objective of this review was to present the best available evidence related to nurse-led cardiac clinics. Inclusion criteria  This review considered any randomised controlled trials that evaluated cardiac nurse-led clinics. In the absence of randomised controlled trials, other research designs such as non-randomised controlled trials and before and after studies were considered for inclusion. Participants were adults (18 years and older) with new or existing coronary heart disease. The interventions of interest to the review included education, assessment, consultation, referral and administrative structures. Outcomes measured included adverse event rates, readmissions, admissions, clinical and cost effectiveness, consumer satisfaction and compliance with therapy. Results  Based on the search terms used, 80 papers were initially identified and reviewed for inclusion; full reports of 24 of these papers were retrieved. There were no papers included that addressed cost effectiveness or adverse events; and none addressed the outcome of referrals. A critical appraisal of the 24 remaining papers identified a total of six randomised controlled trials that met the inclusion criteria. Two studies addressed nurse-led clinics for patients diagnosed with angina, one looked at medication administration and the other looked at educational plans. A further four studies compared secondary preventative care with a nurse-led clinic and general practitioner clinic. One specifically compared usual care versus shared care introduced by nurses for patients awaiting coronary artery bypass grafting. Of the remaining three studies, two have been combined in the results section, as they are an interim report and a final report of the same study. Because of inconsistencies in reporting styles and outcome measurements, meta-analysis could not be performed on all outcomes. However, a narrative summary of each study and comparisons of specific outcomes assessed from within each study has been developed. Although not all outcomes obtained statistical significance, nurse-led clinics were at least as effective as general practitioner clinics for most outcomes. Recommendations  The following recommendations are made: • The use of nurse-led clinics is recommended for patients with coronary heart disease (Level II). • Utilise nurse-led clinics to increase clinic attendance and follow-up rates (Level II). • Nurse-led clinics are recommended for patients who require lifestyle changes to decrease their risk of adverse outcomes associated with coronary heart disease (Level II).

Clinical and economic outcomes of nurse-led services in the ambulatory care setting: A systematic review.

PubMed

Chan, Raymond J; Marx, Wolfgang; Bradford, Natalie; Gordon, Louisa; Bonner, Ann; Douglas, Clint; Schmalkuche, Diana; Yates, Patsy

2018-05-01

With the increasing burden of chronic and age-related diseases, and the rapidly increasing number of patients receiving ambulatory or outpatient-based care, nurse-led services have been suggested as one solution to manage increasing demand on the health system as they aim to reduce waiting times, resources, and costs while maintaining patient safety and enhancing satisfaction. The aims of this review were to assess the clinical effectiveness, economic outcomes and key implementation characteristics of nurse-led services in the ambulatory care setting. A systematic review was conducted using the standard Cochrane Collaboration methodology and was prepared in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) on The Cochrane Library, MEDLINE EBSCO, CINAHL EBSCO, and PsycINFO Ovid (from inception to April 2016). Data were extracted and appraisal undertaken. We included randomised controlled trials; quasi-randomised controlled trials; controlled and non-controlled before-and-after studies that compared the effects of nurse-led services in the ambulatory or community care setting with an alternative model of care or standard care. Twenty-five studies of 180,308 participants were included in this review. Of the 16 studies that measured and reported on health-related quality of life outcomes, the majority of studies (n = 13) reported equivocal outcomes; with three studies demonstrating superior outcomes and one demonstrating inferior outcomes in comparison with physician-led and standard care. Nurse-led care demonstrated either equivalent or better outcomes for a number of outcomes including symptom burden, self-management and behavioural outcomes, disease-specific indicators, satisfaction and perception of quality of life, and health service use. Benefits of nurse-led services remain inconclusive in terms of economic outcomes. Nurse-led care is a safe and feasible model of care for consideration across a number of ambulatory care settings. With appropriate training and support provided, nurse-led care is able to produce at least equivocal outcomes or at times better outcomes in terms of health-related quality of life compared to physician-led care or standard care for managing chronic conditions. There is a lack of high quality economic evaluations for nurse-led services, which is essential for guiding the decision making of health policy makers. Key factors such as education and qualification of the nurse; self-management support; resources available for the nurse; prescribing capabilities; and evaluation using appropriate outcome should be carefully considered for future planning of nurse-led services. Copyright © 2018 Elsevier Ltd. All rights reserved.

Direct Observation of the Biaxial Stress Effect on Efficiency Droop in GaN-based Light-emitting Diode under Electrical Injection.

PubMed

Zheng, Jinjian; Li, Shuiqing; Chou, Chilun; Lin, Wei; Xun, Feilin; Guo, Fei; Zheng, Tongchang; Li, Shuping; Kang, Junyong

2015-12-04

Light-emitting diode (LED) efficiency has attracted considerable interest because of the extended use of solid-state lighting. Owing to lack of direct measurement, identification of the reasons for efficiency droop has been restricted. A direct measurement technique is developed in this work for characterization of biaxial stress in GaN-based blue LEDs under electrical injection. The Raman shift of the GaN E2 mode evidently decreases by 4.4 cm(-1) as the driving current on GaN-based LEDs increases to 700 mA. Biaxial compressive stress is released initially and biaxial tensile stress builds up as the current increases with respect to the value of stress-free GaN. First-principles calculations reveal that electron accumulation is responsible for the stress variation in InxGa1-xN/GaN quantum wells, and then reduces the transition probability among quantum levels. This behavior is consistent with the measured current-dependent external quantum efficiency. The rule of biaxial stress-dependent efficiency is further validated by controlling the biaxial stress of GaN-based LEDs with different sapphire substrate thicknesses. This work provides a method for direct observation of the biaxial stress effect on efficiency droop in LEDs under electrical injection.

Direct Observation of the Biaxial Stress Effect on Efficiency Droop in GaN-based Light-emitting Diode under Electrical Injection

PubMed Central

Zheng, Jinjian; Li, Shuiqing; Chou, Chilun; Lin, Wei; Xun, Feilin; Guo, Fei; Zheng, Tongchang; Li, Shuping; Kang, Junyong

2015-01-01

Light-emitting diode (LED) efficiency has attracted considerable interest because of the extended use of solid-state lighting. Owing to lack of direct measurement, identification of the reasons for efficiency droop has been restricted. A direct measurement technique is developed in this work for characterization of biaxial stress in GaN-based blue LEDs under electrical injection. The Raman shift of the GaN E2 mode evidently decreases by 4.4 cm−1 as the driving current on GaN-based LEDs increases to 700 mA. Biaxial compressive stress is released initially and biaxial tensile stress builds up as the current increases with respect to the value of stress-free GaN. First-principles calculations reveal that electron accumulation is responsible for the stress variation in InxGa1−xN/GaN quantum wells, and then reduces the transition probability among quantum levels. This behavior is consistent with the measured current-dependent external quantum efficiency. The rule of biaxial stress-dependent efficiency is further validated by controlling the biaxial stress of GaN-based LEDs with different sapphire substrate thicknesses. This work provides a method for direct observation of the biaxial stress effect on efficiency droop in LEDs under electrical injection. PMID:26634816

Meeting the challenges of chronic illness: a nurse-led collaborative community care program in Thailand.

PubMed

Sindhu, Siriorn; Pholpet, Chennet; Puttapitukpol, Somjai

2010-01-01

Chronic illness is of concern to health care systems globally. Although a significant evidence base supports the concept of nurse-led interventions, less data is available to address unique features of health care systems in the developing world. The purpose of this study aimed to undertake preliminary testing of an intervention of nurse-led community care program, the Network Collaborative Action Plan (N-CAP), to assess the impact on disease severity and patient satisfaction. A quasi-experimental study, using historical controls, evaluated a collaborative nurse-led intervention to promote coordination and continuity of care for patients with chronic illness. Participants, diagnosed with chronic obstructive lung disease (COPD), coronary heart disease (CHD) and chronic heart failure (CHF) were recruited. Prospective consecutive patient meeting the study criteria (n=47) were assigned into the control group and following development and implementation of the intervention eligible consenting patients were enrolled in the experimental group (n=44). Participants in the experimental group had significantly tower scores on severity of disease measurements during the third week (F = 4.61, p = 0.035) and the eighth week hospital (F = 4.30, p = .041) following hospital discharge than those in the control group. Participants in the experimental group expressed significantly higher scores on satisfaction with community care than those in the control group. A nurse-led, collaboratively developed program has potential to improve satisfaction and decrease symptom development in people with chronic illnesses in Thailand.

The Effectiveness of a Nurse-Led Cognitive-Behavioral Therapy on the Quality of Life, Self-Esteem and Mood Among Filipino Patients Living With Heart Failure: a Randomized Controlled Trial.

PubMed

Cajanding, Ruff Joseph Macale

2016-08-01

The diagnosis and complications associated with heart failure (HF) have been very well established to adversely impact an individual's physical and psychosocial well-being, and interventions such as cognitive-behavioral techniques have demonstrated potential positive benefits among patients with HF. However, the effects of such interventions among Filipino HF patients have not been studied. This study aimed to determine the effectiveness of a nurse-led cognitive-behavioral intervention program on the quality of life, self-esteem and mood among Filipino patients with HF. A randomized control two-group design with repeated measures and collected data before and after the intervention was used in this study. Participants were assigned to either the control (n=48) or the intervention group (n=52). Control group participants received traditional care. Intervention participants underwent a 12-week nurse-led cognitive-behavioral intervention program focusing on patient education, self-monitoring, skills training, cognitive restructuring and spiritual development. Measures of quality of life, self-esteem and mood were obtained at baseline and after the intervention. At baseline, participants in both groups have poor quality of life, low self-esteem, and moderate depressive symptom scores. After the 12-week intervention period, participants in the intervention group had significant improvement in their quality of life, self-esteem and mood scores compared with those who received only standard care. Nurse-led cognitive-behavioral intervention is an effective strategy in improving the quality of life, self-esteem and mood among Filipino patients living with HF. It is recommended that this intervention be incorporated in the optimal care of patients with this cardiac condition. Copyright © 2015 Elsevier Inc. All rights reserved.

Seed Cotton Mass Flow Measurement in the Gin

USDA-ARS?s Scientific Manuscript database

Seed cotton mass flow measurement is necessary for the development of improved gin process control systems that can increase gin efficiency and improve fiber quality. Previous studies led to the development of a seed cotton mass flow rate sensor based on the static pressure drop across the blowbox, ...

Design of transient light signal simulator based on FPGA

NASA Astrophysics Data System (ADS)

Kang, Jing; Chen, Rong-li; Wang, Hong

2014-11-01

A design scheme of transient light signal simulator based on Field Programmable gate Array (FPGA) was proposed in this paper. Based on the characteristics of transient light signals and measured feature points of optical intensity signals, a fitted curve was created in MATLAB. And then the wave data was stored in a programmed memory chip AT29C1024 by using SUPERPRO programmer. The control logic was realized inside one EP3C16 FPGA chip. Data readout, data stream cache and a constant current buck regulator for powering high-brightness LEDs were all controlled by FPGA. A 12-Bit multiplying CMOS digital-to-analog converter (DAC) DAC7545 and an amplifier OPA277 were used to convert digital signals to voltage signals. A voltage-controlled current source constituted by a NPN transistor and an operational amplifier controlled LED array diming to achieve simulation of transient light signal. LM3405A, 1A Constant Current Buck Regulator for Powering LEDs, was used to simulate strong background signal in space. Experimental results showed that the scheme as a transient light signal simulator can satisfy the requests of the design stably.

Haemostasis in Oral Surgery with Blue-Violet Light.

PubMed

Veleska-Stevkoska, Daniela; Koneski, Filip

2018-04-15

The invasive dental procedures usually result in wounds accompanied by physiological bleeding. Even though the bleeding is easily manageable, it is still one of the major concerns of the patients and a reason for their subjective discomfort. Recently, a novel approach with light-emitting diode (LED) was introduced to control the bleeding. This study aims to examine the effectiveness of the irradiation with blue-violet light LEDs on the haemostasis. The study included 40 patients with an indication for tooth extraction, divided into two groups: examination group (n = 30) and a control group (n = 10). The site of the extraction socket in the examination group was irradiated with LED (410 nm) until the bleeding stopped. The patients from the control group were treated by conventional gauze pressure to stop the bleeding (control group). The duration of irradiation and gauze pressure was measured and compared. The statistical analysis was performed with Student T-test. The examination group showed the shorter duration of bleeding compared to the control group for 13.67 seconds and 156 seconds, respectively. The most of the cases in the examination group were irradiated in 10 seconds (70%), followed by irradiation of 20 seconds (23.3%) and 30 seconds (6.6%). In the control group, the average time to stop the bleeding by the conventional method was 156 second. The blue-violet LED light shortens the bleeding time from the extraction socket after tooth extraction and may be a promising method for achieving haemostasis.

New developments in electronic reference controls for frequency domain optical sensing

NASA Astrophysics Data System (ADS)

Chatni, M. R.; Li, G.; Porterfield, D. M.

2009-05-01

The reference optical path is essential for optical systems which function on the basis of light interference. In the case of frequency domain (FD) fluorescence life-time optrodes, a reference LED is used as a standard for calculating the phase angle. The reference LED is configured so that radiation travels the same length to the detector as that of the fluorescence signal being analyzed. The phase shift, which provides details of fluorescence lifetime, is measured between these two signals - the fluorescence signal and reference LED signal, using a photodetector. We have designed, developed and implemented a FD optrode system without a reference LED. The key requirement of such a system is that phase shifts due to optics at wavelength of fluorescence and electronics have to be calibrated. In the reference-free system, the reference signal comes from the lock-in-amplifier which also drives the excitation LED. The lock-in-amplifier measures the phase shift between the excitation signal and the fluorescence emission signal from the photodetector and is locked at the frequency of modulation of the excitation signal. This insures higher signal to noise ratio and low-noise measurements. The reference-free optrode system removes some constraints on the coupling optics, which help improve the overall performance of the system. After development of electronics, and optimization of coupling optics, the system was calibrated in different oxygen concentration solutions to measure fluorescence intensity and lifetime of the oxygen sensitive dye platinum tetrakis (pentafluorophenyl) porphine (PtTFPP).

Fabrication of selective-area growth InGaN LED by mixed-source hydride vapor-phase epitaxy

NASA Astrophysics Data System (ADS)

Bae, Sung Geun; Jeon, Injun; Jeon, Hunsoo; Kim, Kyoung Hwa; Yang, Min; Yi, Sam Nyung; Lee, Jae Hak; Ahn, Hyung Soo; Yu, Young Moon; Sawaki, Nobuhiko; Kim, Suck-Whan

2018-01-01

We prepared InGaN light-emitting diodes (LEDs) with the active layers grown from a mixed source of Ga-In-N materials on an n-type GaN substrate by a selective-area growth method and three fabrication steps: photolithography, epitaxial layer growth, and metallization. The preparation followed a previously developed experimental process using apparatus for mixed-source hydride vapor-phase epitaxy (HVPE), which consisted of a multi-graphite boat, for insulating against the high temperature and to control the growth rate of epilayers, filled with the mixed source on the inside and a radio-frequency (RF) heating coil for heating to a high temperature (T > 900 °C) and for easy control of temperature outside the source zone. Two types of LEDs were prepared, with In compositions of 11.0 and 6.0% in the InGaN active layer, and room-temperature electroluminescence measurements exhibited a main peak corresponding to the In composition at either 420 or 390 nm. The consecutive growth of InGaN LEDs by the mixed-source HVPE method provides a technique for the production of LEDs with a wide range of In compositions in the active layer.

Effect of short LED lamp exposure on wear resistance, residual monomer and degree of conversion for Filtek Z250 and Tetric EvoCeram composites.

PubMed

Kopperud, Hilde M; Johnsen, Gaute F; Lamolle, Sébastien; Kleven, Inger S; Wellendorf, Hanne; Haugen, Håvard J

2013-08-01

The latest LED dental curing devices claim sufficient curing of restorative materials with short curing times. This study evaluates mechanical and chemical properties as a function of curing time of two commercial composite filling materials cured with three different LED lamps. The composites were Filtek Z250 (3M ESPE) and Tetric EvoCeram (Ivoclar Vivadent) and the LED curing devices were bluephase 16i (Ivoclar Vivadent), L.E.Demetron II (Kerr) and Mini L.E.D. (Satelec). Control samples were cured with a QTH-lamp (VCL 400, Kerr). The wear resistance after simulated tooth brushing, degree of conversion, curing depth, and amounts of residual monomers were measured after different curing times. The results of this study show that short curing time with high-intensity LEDs may influence the bulk properties of the materials, resulting in lower curing depth and increased residual monomer content. The measured surface properties of the materials, degree of conversion and wear resistance, were not affected by short curing times to the same extent. This study demonstrates that reduced exposure time with high intensity LEDs can result in composite restorations with inferior curing depth and increased leaching of monomers. Dentists are recommended to use sufficient curing times even with high intensity LEDs to ensure adequate curing and minimize the risk of monomer leaching. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

An LED Approach for Measuring the Photocatalytic Breakdown of Crystal Violet Dye

NASA Technical Reports Server (NTRS)

Ryan, Robert E.; Underwood, Lauren W.; ONeal, Duane; Pagnutti, Mary; Davis, Bruce A.

2009-01-01

A simple technique to assess the reactivity of photocatalytic coatings sprayed onto transmissive glass surfaces was developed. This new method uses ultraviolet (UV) gallium nitride (GaN) light-emitting diodes (LEDs) to drive a photocatalytic reaction (the photocatalytic breakdown of a UV-resistant dye applied to a surface coated with the semiconductor titanium dioxide); and then a combination of a stabilized white light LED and a spectrometer to track the dye degradation as a function of time. Simple, standardized evaluation techniques that assess photocatalytic materials over a variety of environmental conditions, including illumination level, are not generally available and are greatly needed prior to in situ application of photocatalytic technologies. To date, much research pertaining to this aspect of photocatalysis has been limited and has focused primarily on laboratory experiments using mercury lamps. Mercury lamp illumination levels are difficult to control over large ranges and are temporally modulated by line power, limiting their use in helping to understand and predict how photocatalytic materials will behave in natural environmental settings and conditions. The methodology described here, using steady-state LEDs and time series spectroradiometric techniques, is a novel approach to explore the effect of UV light on the photocatalytic degradation of a UV resistant dye (crystal violet). GaN UV LED arrays, centered around 365 nm with an adjustable DC power supply, are used to create a small, spatially uniform light field where the steady state light level can be varied over three to four orders of magnitude. For this study, a set of glass microscope slides was custom coated with a thinly sprayed layer of photocatalytic titanium dioxide. Crystal violet was then applied to these titanium-dioxide coated slides and to uncoated control slides. The slides were then illuminated at various light levels from the dye side of the slide by the UV LED array. To monitor dye degradation on the slides over time, a temperature-stabilized white light LED was used to illuminate the opposite side of the slides. As the dye degraded, the amount of light from the white light LED transmitted through the slide was monitored with a spectrometer and subsequently analyzed to determine and compare the rate of dye degradation for photocatalytically coated versus uncoated slide surfaces. The long-term stability of the spectrometer/white light LED combination, which required only a single reference spectra to be taken for a time series sequence of several hours, enabled accurate measurements of transmitted light over time. Time series transmission curves were generated and results demonstrated that over time the transmission increased much more rapidly on the coated slides than on the control slides. This experimental configuration and methodology for photocatalytic activity measurement minimizes many external variable effects and allows low light level studies to be performed. This study also compares the advantages of this novel LED light source design to traditional mercury lamp systems and non-LED lamp approaches that have conventionally been used. The methodology and experimental design research summarized in this abstract is partly funded by the Department of Homeland Security, Science and Technology Directorate, and by the NASA Stennis Space Center Innovative Partnerships Program.

Influence of Emotion on the Control of Low-Level Force Production

ERIC Educational Resources Information Center

Naugle, Kelly M.; Coombes, Stephen A.; Cauraugh, James H.; Janelle, Christopher M.

2012-01-01

The accuracy and variability of a sustained low-level force contraction (2% of maximum voluntary contraction) was measured while participants viewed unpleasant, pleasant, and neutral images during a feedback occluded force control task. Exposure to pleasant and unpleasant images led to a relative increase in force production but did not alter the…

Involving fathers in teaching youth about farm tractor seatbelt safety--a randomized control study.

PubMed

Jinnah, Hamida Amirali; Stoneman, Zolinda; Rains, Glen

2014-03-01

Farm youth continue to experience high rates of injury and deaths as a result of agricultural activities. Farm machinery, especially tractors, is the most common cause of casualties to youth. A Roll-Over Protection Structure (ROPS) along with a fastened seatbelt can prevent almost all injuries and fatalities from tractor overturns. Despite this knowledge, the use of seatbelts by farmers on ROPS tractors remains low. This study treats farm safety as a family issue and builds on the central role of parents as teachers and role models of farm safety for youth. This research study used a longitudinal, repeated-measures, randomized-control design in which youth 10-19 years of age were randomly assigned to either of two intervention groups (parent-led group and staff-led group) or the control group. Fathers in the parent-led group were less likely to operate ROPS tractors without a seatbelt compared with other groups. They were more likely to have communicated with youth about the importance of wearing seatbelts on ROPS tractors. Consequently, youth in the parent-led group were less likely to operate a ROPS tractor without a seatbelt than the control group at post-test. This randomized control trial supports the effectiveness of a home-based, father-led farm safety intervention as a promising strategy for reducing youth as well as father-unsafe behaviors (related to tractor seatbelts) on the farm. This intervention appealed to fathers' strong motivation to practice tractor safety for the sake of their youth. Involving fathers helped change both father as well as youth unsafe tractor-seatbelt behaviors. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Effects of a prevention program for internet addiction among middle school students in South Korea.

PubMed

Yang, Sun-Yi; Kim, Hee-Soon

2018-05-01

This study explored the effects of a self-regulatory efficacy improvement program on self-control, self-efficacy, internet addiction, and time spent on the internet among middle school students in South Korea. The program was led by school nurses, and it is integrated self-efficacy and self-regulation promotion strategies based on Bandura's social cognitive theory. A quasi-experimental, nonequivalent, control group, pre-posttest design was used. The participants were 79 middle school students. Measurements included the Self-Control Scale, Self-Efficacy Scale, Internet Addiction Proneness Scale, and an assessment of internet addiction. Self-control and self-efficacy significantly increased and internet addiction and time spent on the internet significantly decreased in the intervention group compared with the control group. A program led by school nurses that integrated and applied self-efficacy and self-regulation intervention strategies proved effective for prevention of students' internet addiction. © 2018 Wiley Periodicals, Inc.

High-Fluence Light-Emitting Diode-Generated Red Light Modulates the Transforming Growth Factor-Beta Pathway in Human Skin Fibroblasts.

PubMed

Mamalis, Andrew; Jagdeo, Jared

2018-05-24

Skin fibrosis is a significant medical problem with limited available treatment modalities. The key cellular characteristics include increased fibroblast proliferation, collagen production, and transforming growth factor-beta (TGF-B)/SMAD pathway signaling. The authors have previously shown that high-fluence light-emitting diode red light (HF-LED-RL) decreases cellular proliferation and collagen production. Herein, the authors investigate the ability of HF-LED-RL to modulate the TGF-B/SMAD pathway. Normal human dermal fibroblasts were cultured and irradiated with a commercially available hand-held LED array. After irradiation, cell lysates were collected and levels of pSMAD2, TGF-Beta 1, and TGF-Beta I receptor were measured using Western blot. High-fluence light-emitting diode red light decreased TGF-Beta 1 ligand (TGF-B1) levels after irradiation. 320 J/cm HF-LED-RL resulted in 59% TGF-B1 and 640 J/cm HF-LED-RL resulted in 54% TGF-B1, relative to controls. 640 J/cm HF-LED-RL resulted in 62% pSMAD2 0 hours after irradiation, 65% pSMAD2 2 hours after irradiation, and 95% 4 hours after irradiation, compared with matched controls. High-fluence light-emitting diode red light resulted in no significant difference in transforming growth factor-beta receptor I levels compared with matched controls. Skin fibrosis is a significant medical problem with limited available treatment modalities. Light-emitting diode-generated red light is a safe, economic, and noninvasive modality that has a body of in vitro evidence supporting the reduction of key cellular characteristics associated with skin fibrosis.

Vision Based Navigation for Autonomous Cooperative Docking of CubeSats

NASA Astrophysics Data System (ADS)

Pirat, Camille; Ankersen, Finn; Walker, Roger; Gass, Volker

2018-05-01

A realistic rendezvous and docking navigation solution applicable to CubeSats is investigated. The scalability analysis of the ESA Autonomous Transfer Vehicle Guidance, Navigation & Control (GNC) performances and the Russian docking system, shows that the docking of two CubeSats would require a lateral control performance of the order of 1 cm. Line of sight constraints and multipath effects affecting Global Navigation Satellite System (GNSS) measurements in close proximity prevent the use of this sensor for the final approach. This consideration and the high control accuracy requirement led to the use of vision sensors for the final 10 m of the rendezvous and docking sequence. A single monocular camera on the chaser satellite and various sets of Light-Emitting Diodes (LEDs) on the target vehicle ensure the observability of the system throughout the approach trajectory. The simple and novel formulation of the measurement equations allows differentiating unambiguously rotations from translations between the target and chaser docking port and allows a navigation performance better than 1 mm at docking. Furthermore, the non-linear measurement equations can be solved in order to provide an analytic navigation solution. This solution can be used to monitor the navigation filter solution and ensure its stability, adding an extra layer of robustness for autonomous rendezvous and docking. The navigation filter initialization is addressed in detail. The proposed method is able to differentiate LEDs signals from Sun reflections as demonstrated by experimental data. The navigation filter uses a comprehensive linearised coupled rotation/translation dynamics, describing the chaser to target docking port motion. The handover, between GNSS and vision sensor measurements, is assessed. The performances of the navigation function along the approach trajectory is discussed.

Broadband radiometric LED measurements

NASA Astrophysics Data System (ADS)

Eppeldauer, G. P.; Cooksey, C. C.; Yoon, H. W.; Hanssen, L. M.; Podobedov, V. B.; Vest, R. E.; Arp, U.; Miller, C. C.

2016-09-01

At present, broadband radiometric LED measurements with uniform and low-uncertainty results are not available. Currently, either complicated and expensive spectral radiometric measurements or broadband photometric LED measurements are used. The broadband photometric measurements are based on the CIE standardized V(λ) function, which cannot be used in the UV range and leads to large errors when blue or red LEDs are measured in its wings, where the realization is always poor. Reference irradiance meters with spectrally constant response and high-intensity LED irradiance sources were developed here to implement the previously suggested broadband radiometric LED measurement procedure [1, 2]. Using a detector with spectrally constant response, the broadband radiometric quantities of any LEDs or LED groups can be simply measured with low uncertainty without using any source standard. The spectral flatness of filtered-Si detectors and low-noise pyroelectric radiometers are compared. Examples are given for integrated irradiance measurement of UV and blue LED sources using the here introduced reference (standard) pyroelectric irradiance meters. For validation, the broadband measured integrated irradiance of several LED-365 sources were compared with the spectrally determined integrated irradiance derived from an FEL spectral irradiance lamp-standard. Integrated responsivity transfer from the reference irradiance meter to transfer standard and field UV irradiance meters is discussed.

Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology.

PubMed

Han, Hau-Vei; Lin, Huang-Yu; Lin, Chien-Chung; Chong, Wing-Cheung; Li, Jie-Ru; Chen, Kuo-Ju; Yu, Peichen; Chen, Teng-Ming; Chen, Huang-Ming; Lau, Kei-May; Kuo, Hao-Chung

2015-12-14

Colloidal quantum dots which can emit red, green, and blue colors are incorporated with a micro-LED array to demonstrate a feasible choice for future display technology. The pitch of the micro-LED array is 40 μm, which is sufficient for high-resolution screen applications. The method that was used to spray the quantum dots in such tight space is called Aerosol Jet technology which uses atomizer and gas flow control to obtain uniform and controlled narrow spots. The ultra-violet LEDs are used in the array to excite the red, green and blue quantum dots on the top surface. To increase the utilization of the UV photons, a layer of distributed Bragg reflector was laid down on the device to reflect most of the leaked UV photons back to the quantum dot layers. With this mechanism, the enhanced luminous flux is 194% (blue), 173% (green) and 183% (red) more than that of the samples without the reflector. The luminous efficacy of radiation (LER) was measured under various currents and a value of 165 lm/Watt was recorded.

The role of work habits in the motivation of food safety behaviors.

PubMed

Hinsz, Verlin B; Nickell, Gary S; Park, Ernest S

2007-06-01

The authors considered work habits within an integrated framework of motivated behavior. A distinction made between automatic and controlled action led to 2 measures of work habits: a habit strength measure reflecting the 4 characteristics of automaticity and a measure of work routines under conscious control. Workers at a turkey processing plant (N = 162) responded to an extensive survey of these work habits measures with regard to food safety. Results indicated that attitudes and subjective norms predicted food safety intentions. These intentions, along with perceived behavior control and work habits, predicted reports of food safety behaviors. A mediation analysis indicated that the work routines measure accounted for the variance in self-reported behavior and mediated any effect of the habit strength measure. ((c) 2007 APA, all rights reserved).

Modification in oxidative processes in muscle tissues exposed to laser- and light-emitting diode radiation.

PubMed

Monich, Victor A; Bavrina, Anna P; Malinovskaya, Svetlana L

2018-01-01

Exposure of living tissues to high-intensity red or near-infrared light can produce the oxidative stress effects both in the target zone and adjacent ones. The protein oxidative modification (POM) products can be used as reliable and early markers of oxidative stress. The contents of modified proteins in the investigated specimens can be evaluated by the 2,4-dinitrophenylhydrazine assay (the DNPH assay). Low-intensity red light is able to decrease the activity of oxidative processes and the DNPH assay data about the POM products in the biological tissues could show both an oxidative stress level and an efficiency of physical agent protection against the oxidative processes. Two control groups of white rats were irradiated by laser light, the first control group by red light and the second one by near-infrared radiation (NIR).Two experimental groups were consequently treated with laser and red low-level light-emitting diode radiation (LED). One of them was exposed to red laser light + LED and the other to NIR + LED. The fifth group was intact. Each group included ten animals. The effect of laser light was studied by methods of protein oxidative modifications. We measured levels of both induced and spontaneous POM products by the DNPH assay. The dramatic increase in levels of POM products in the control group samples when compared with the intact group data as well as the sharp decrease in the POM products in the experimental groups treated with LED low-level light were statistically significant (p ≤ 0.05). Exposure of skeletal muscles to high-intensity red and near-infrared laser light causes oxidative stress that continues not less than 3 days. The method of measurement of POM product contents by the DNPH assay is a reliable test of an oxidative process rate. Red low-intensity LED radiation can provide rehabilitation of skeletal muscle tissues treated with high-intensity laser light.

Impact of peer-led group education on the quality of life in patients with ankylosing spondylitis.

PubMed

Kaya, Taciser; Goksel Karatepe, Altinay; Atici Ozturk, Pinar; Gunaydin, Rezzan

2016-02-01

To determine the effect of peer-led group education on the quality of life and depression in patients with ankylosing spondylitis (AS). Eighty patients with definite AS were allocated randomly to either the education or control group. The education group (n = 40) was subjected to a peer-led group education program about disease and was given an educational booklet, while the control group (n = 40) was given the educational booklet only. Levels of quality of life and depression were measured at baseline, immediately after education (fourth week) and at 6 months in both groups. The results are based on 56 (n = 27, education group; n = 29, control group) patients. The level of quality of life and depressive symptoms were not changed except for a deterioration in the social functioning subgroup of Short From (SF)-36 in both groups. When the groups were compared, there were no significant differences between changes in social functioning scores. Peer-led education did not alter quality of life levels and depression scores. However, because of the maintainance of quality of life levels, this type of intervention may be considered as a supplementary intervention to the standard medical care for management of AS. © 2013 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Modular, Microprocessor-Controlled Flash Lighting System

NASA Technical Reports Server (NTRS)

Kiefer, Dwayne; Gray, Elizabeth; Skupinski, Robert; Stachowicz, Arthur; Birchenough, William

2006-01-01

A microprocessor-controlled lighting system generates brief, precisely timed, high-intensity flashes of light for scientific imaging at frame rates up to about 1 kHz. The system includes an array of light-emitting diodes (LEDs) that are driven in synchronism with an externally generated timing signal (for example, a timing signal generated by a video camera). The light output can be varied in peak intensity, pulse duration, pulse delay, and pulse rate, all depending on the timing signal and associated externally generated control signals. The array of LEDs comprises as many as 16 LED panels that can be attached together. Each LED panel is a module consisting of a rectangular subarray of 10 by 20 LEDs of advanced design on a printed-circuit board in a mounting frame with a power/control connector. The LED panels are controlled by an LED control module that contains an AC-to-DC power supply, a control board, and 8 LED-panel driver boards. In prior LED panels, the LEDs are packaged at less than maximum areal densities in bulky metal housings that reduce effective active areas. In contrast, in the present LED panels, the LEDs are packed at maximum areal density so as to afford 100-percent active area and so that when panels are joined side by side to form the array, there are no visible seams between them and the proportion of active area is still 100 percent. Each panel produces an illuminance of .5 x 10( exp 4) lux at a distance of 5.8 in. (approx.1.6 cm). The LEDs are driven according to a pulse-width-modulation control scheme that makes it safe to drive the LEDs beyond their rated steady-state currents in order to generate additional light during short periods. The drive current and the pulse-width modulation for each LED panel can be controlled independently of those of the other 15 panels. The maximum allowable duration of each pulse of drive current is a function of the amount of overdrive, the total time to be spent in overdrive operation, and the limitations of the LEDs. The system is configured to limit the overdrive according to values specific to each type of LED in the array. These values are coded into firmware to prevent inadvertent damage to the LED panels.

Enhancement of external quantum efficiency and quality of heterojunction white LEDs by varying the size of ZnO nanorods.

PubMed

Bano, N; Hussain, I; Sawaf, S; Alshammari, Abeer; Saleemi, F

2017-06-16

The size of ZnO nanorods (NRs) plays an important role in tuning the external quantum efficiency (EQE) and quality of light generated by white light emitting diodes (LEDs). In this work, we report on the enhancement of EQE and the quality of ZnO NR-based hetrojunction white LEDs fabricated on a p-GaN substrate using a low temperature solution method. Cathodoluminescence spectra demonstrate that ultraviolet (UV) emission decreases and visible deep band emission increases with an increase in the length of the ZnO NRs. The UV emission could be internally reabsorbed by the ZnO NR excitation, thus enhancing the emission intensity of the visible deep band. Photocurrent measurements validated the fact that the EQE depends on the size of ZnO NRs, increasing by 87% with an increase in the length of the ZnO NRs. Furthermore, the quality of white light was measured and clearly indicated an increase in the color rendering indices of the LEDs with an increase in the length of the ZnO NRs, confirming that the quality of light generated by LEDs can be tuned by varying the length of the ZnO NRs. These results suggest that the EQE and visible deep band emission from n-ZnONRs/p-GaN heterojunction LEDs can be effectively controlled by adjusting the length of the ZnO NRs, which can be useful for realizing tunable white LEDs.

Enhancement of external quantum efficiency and quality of heterojunction white LEDs by varying the size of ZnO nanorods

NASA Astrophysics Data System (ADS)

Bano, N.; Hussain, I.; Sawaf, S.; Alshammari, Abeer; Saleemi, F.

2017-06-01

The size of ZnO nanorods (NRs) plays an important role in tuning the external quantum efficiency (EQE) and quality of light generated by white light emitting diodes (LEDs). In this work, we report on the enhancement of EQE and the quality of ZnO NR-based hetrojunction white LEDs fabricated on a p-GaN substrate using a low temperature solution method. Cathodoluminescence spectra demonstrate that ultraviolet (UV) emission decreases and visible deep band emission increases with an increase in the length of the ZnO NRs. The UV emission could be internally reabsorbed by the ZnO NR excitation, thus enhancing the emission intensity of the visible deep band. Photocurrent measurements validated the fact that the EQE depends on the size of ZnO NRs, increasing by 87% with an increase in the length of the ZnO NRs. Furthermore, the quality of white light was measured and clearly indicated an increase in the color rendering indices of the LEDs with an increase in the length of the ZnO NRs, confirming that the quality of light generated by LEDs can be tuned by varying the length of the ZnO NRs. These results suggest that the EQE and visible deep band emission from n-ZnONRs/p-GaN heterojunction LEDs can be effectively controlled by adjusting the length of the ZnO NRs, which can be useful for realizing tunable white LEDs.

Promoting action control and coping planning to improve hand hygiene.

PubMed

Reyes Fernández, Benjamín; Lippke, Sonia; Knoll, Nina; Blanca Moya, Emanuel; Schwarzer, Ralf

2015-09-25

We examined a brief educational intervention addressing hand hygiene self-regulatory mechanisms, and evaluated which psychological mechanisms may lead to hand hygiene behaviours. Two hundred forty two students (mean age = 21 years, SD = 3.9) received either an experimental (n = 149) or a control condition on action control and planning (n = 93). Hand hygiene, coping planning, and action control were measured at baseline and six weeks later. By applying repeated measures ANOVA, we compared the experimental condition addressing planning to perform hand hygiene with a control condition. Additionally, working mechanisms were evaluated by means of mediation analysis. The intervention had an effect on action control, as reflected by a time by treatment interaction. The direct effect of the intervention on behaviour was, however, non-significant. Changes in action control led to changes in coping planning. These social-cognitive changes mediated the effect of intervention on behaviour, after controlling for gender, baseline behaviour, and classroom membership. In spite of the associations between the intervention and self-regulatory strategies, no direct effect was found of the intervention on behaviour. Further research on how to increase hand sanitizing, involving enviromental characteristics, is required. The intervention led only indirectly to an improvement of hand hygiene via changes in self-regulatory factors. Results indicate the importance of promoting action control and coping planning to initiate changes in hand hygienic behaviours.

Broadband Radiometric LED Measurements

PubMed Central

Eppeldauer, G. P.; Cooksey, C. C.; Yoon, H. W.; Hanssen, L. M.; Podobedov, V. B.; Vest, R. E.; Arp, U.; Miller, C. C.

2017-01-01

At present, broadband radiometric measurements of LEDs with uniform and low-uncertainty results are not available. Currently, either complicated and expensive spectral radiometric measurements or broadband photometric LED measurements are used. The broadband photometric measurements are based on the CIE standardized V(λ) function, which cannot be used in the UV range and leads to large errors when blue or red LEDs are measured in its wings, where the realization is always poor. Reference irradiance meters with spectrally constant response and high-intensity LED irradiance sources were developed here to implement the previously suggested broadband radiometric LED measurement procedure [1, 2]. Using a detector with spectrally constant response, the broadband radiometric quantities of any LEDs or LED groups can be simply measured with low uncertainty without using any source standard. The spectral flatness of filtered-Si detectors and low-noise pyroelectric radiometers are compared. Examples are given for integrated irradiance measurement of UV and blue LED sources using the here introduced reference (standard) pyroelectric irradiance meters. For validation, the broadband measured integrated irradiance of several LED-365 sources were compared with the spectrally determined integrated irradiance derived from an FEL spectral irradiance lamp-standard. Integrated responsivity transfer from the reference irradiance meter to transfer standard and field UV irradiance meters is discussed. PMID:28649167

Broadband Radiometric LED Measurements.

PubMed

Eppeldauer, G P; Cooksey, C C; Yoon, H W; Hanssen, L M; Podobedov, V B; Vest, R E; Arp, U; Miller, C C

2016-01-01

At present, broadband radiometric measurements of LEDs with uniform and low-uncertainty results are not available. Currently, either complicated and expensive spectral radiometric measurements or broadband photometric LED measurements are used. The broadband photometric measurements are based on the CIE standardized V(λ) function, which cannot be used in the UV range and leads to large errors when blue or red LEDs are measured in its wings, where the realization is always poor. Reference irradiance meters with spectrally constant response and high-intensity LED irradiance sources were developed here to implement the previously suggested broadband radiometric LED measurement procedure [1, 2]. Using a detector with spectrally constant response, the broadband radiometric quantities of any LEDs or LED groups can be simply measured with low uncertainty without using any source standard. The spectral flatness of filtered-Si detectors and low-noise pyroelectric radiometers are compared. Examples are given for integrated irradiance measurement of UV and blue LED sources using the here introduced reference (standard) pyroelectric irradiance meters. For validation, the broadband measured integrated irradiance of several LED-365 sources were compared with the spectrally determined integrated irradiance derived from an FEL spectral irradiance lamp-standard. Integrated responsivity transfer from the reference irradiance meter to transfer standard and field UV irradiance meters is discussed.

Advanced illumination control algorithm for medical endoscopy applications

NASA Astrophysics Data System (ADS)

Sousa, Ricardo M.; Wäny, Martin; Santos, Pedro; Morgado-Dias, F.

2015-05-01

CMOS image sensor manufacturer, AWAIBA, is providing the world's smallest digital camera modules to the world market for minimally invasive surgery and one time use endoscopic equipment. Based on the world's smallest digital camera head and the evaluation board provided to it, the aim of this paper is to demonstrate an advanced fast response dynamic control algorithm of the illumination LED source coupled to the camera head, over the LED drivers embedded on the evaluation board. Cost efficient and small size endoscopic camera modules nowadays embed minimal size image sensors capable of not only adjusting gain and exposure time but also LED illumination with adjustable illumination power. The LED illumination power has to be dynamically adjusted while navigating the endoscope over changing illumination conditions of several orders of magnitude within fractions of the second to guarantee a smooth viewing experience. The algorithm is centered on the pixel analysis of selected ROIs enabling it to dynamically adjust the illumination intensity based on the measured pixel saturation level. The control core was developed in VHDL and tested in a laboratory environment over changing light conditions. The obtained results show that it is capable of achieving correction speeds under 1 s while maintaining a static error below 3% relative to the total number of pixels on the image. The result of this work will allow the integration of millimeter sized high brightness LED sources on minimal form factor cameras enabling its use in endoscopic surgical robotic or micro invasive surgery.

High-Achieving High School Students and Not so High-Achieving College Students: A Look at Lack of Self-Control, Academic Ability, and Performance in College

ERIC Educational Resources Information Center

Honken, Nora B.; Ralston, Patricia A. S.

2013-01-01

This study investigated the relationship among lack of self-control, academic ability, and academic performance for a cohort of freshman engineering students who were, with a few exceptions, extremely high achievers in high school. Structural equation modeling analysis led to the conclusion that lack of self-control in high school, as measured by…

Three consecutive days of application of LED therapy is necessary to inhibit experimentally induced root resorption in rats: a microtomographic study.

PubMed

Higashi, Dayla Thyeme; Andrello, Avacir Casanova; Tondelli, Pedro Marcelo; de Oliveira Toginho Filho, Dari; de Paula Ramos, Solange

2017-01-01

Previous studies have suggested that phototherapy may modulate orthodontic tooth movement and the incidence of root resorption. We aimed to identify a minimal dose-response relationship to LED therapy with regard to orthodontic tooth movement (OTM) and root resorption in rats. Forty-eight male Wistar rats were divided into six groups with equal and random distribution: control (C) no intervention; three daily LED irradiation (CLED); submitted only to OTM (RR); OTM and LED irradiation on the first day (LED1); OTM and two LED irradiation on the first and second days (LED2); and OTM and three LED irradiation on the first, second, and third days (LED3). Orthodontic appliance was installed in groups RR, LED1, LED2, and LED3 to promote OTM. Animals from groups CLED, LED1, LED2, and LED3 received LED therapy (940 nm, 4 J, 4 J/cm2) according to each group of treatment. After 7 days, all the animals were sacrificed. The jaws were fixed and scanned with microtomography (micro-CT). The micro-CT images were reconstructed on 2D and 3D models. These models were used to identify and measure root resorption number and dimensions (diameter, depth, and volume). The distance between the first and second molars was used to verify tooth displacement. The results showed that LED3 group had significantly lower number of root resorption. The root resorption dimensions (diameter and depth) had no significant differences among the experimental groups. LED3 group had significant tooth displacement in relation to C and CLED groups. In conclusion, three daily LED therapy doses are required to inhibit root resorption after appliance of orthodontic forces.

Teacher Professionalism: Subverting the Society of Control

ERIC Educational Resources Information Center

Wood, Phil

2014-01-01

The past 30 years have seen a series of major shifts in English education. Central to these changes has been the growth of data systems which now measure and control the work of teachers to a huge degree. This form of data-led surveillance was predicted in the work of Gilles Deleuze, a totalising process where data become more important than the…

Solid-state lighting life prediction using extended Kalman filter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lall, Pradeep; Wei, Junchao; Davis, Lynn

2013-07-16

Solid-state lighting (SSL) luminaires containing light emitting diodes (LEDs) have the potential of seeing excessive temperatures when being transported across country or being stored in non-climate controlled warehouses. They are also being used in outdoor applications in desert environments that see little or no humidity but will experience extremely high temperatures during the day. This makes it important to increase our understanding of what effects high temperature exposure for a prolonged period of time will have on the usability and survivability of these devices. The U.S. Department of Energy has made a long term commitment to advance the efficiency, understandingmore » and development of solid-state lighting (SSL) and is making a strong push for the acceptance and use of SSL products to reduce overall energy consumption attributable to lighting. Traditional light sources “burn out” at end-of-life. For an incandescent bulb, the lamp life is defined by B50 life. However, the LEDs have no filament to “burn”. The LEDs continually degrade and the light output decreases eventually below useful levels causing failure. Presently, the TM-21 test standard is used to predict the L70 life of SSL Luminaires from LM-80 test data. The TM-21 model uses an Arrhenius Equation with an Activation Energy, Pre-decay factor and Decay Rates. Several failure mechanisms may be active in a luminaire at a single time causing lumen depreciation. The underlying TM-21 Arrhenius Model may not capture the failure physics in presence of multiple failure mechanisms. Correlation of lumen maintenance with underlying physics of degradation at system-level is needed. In this paper, a Kalman Filter and Extended Kalman Filters have been used to develop a 70% Lumen Maintenance Life Prediction Model for a LEDs used in SSL luminaires. This model can be used to calculate acceleration factors, evaluate failure-probability and identify ALT methodologies for reducing test time. Ten-thousand hour LM-80 test data for various LEDs have been used for model development. System state has been described in state space form using the measurement of the feature vector, velocity of feature vector change and the acceleration of the feature vector change. System state at each future time has been computed based on the state space at preceding time step, system dynamics matrix, control vector, control matrix, measurement matrix, measured vector, process noise and measurement noise. The future state of the lumen depreciation has been estimated based on a second order Kalman Filter model and a Bayesian Framework. The measured state variable has been related to the underlying damage using physics-based models. Life prediction of L70 life for the LEDs used in SSL luminaires from KF and EKF based models have been compared with the TM-21 model predictions and experimental data.« less

Effectiveness of facilitated introduction of a standard operating procedure into routine processes in the operating theatre: a controlled interrupted time series.

PubMed

Morgan, Lauren; New, Steve; Robertson, Eleanor; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; Pickering, Sharon P; Hadi, Mohammed; Griffin, Damian; McCulloch, Peter

2015-02-01

Standard operating procedures (SOPs) should improve safety in the operating theatre, but controlled studies evaluating the effect of staff-led implementation are needed. In a controlled interrupted time series, we evaluated three team process measures (compliance with WHO surgical safety checklist, non-technical skills and technical performance) and three clinical outcome measures (length of hospital stay, complications and readmissions) before and after a 3-month staff-led development of SOPs. Process measures were evaluated by direct observation, using Oxford Non-Technical Skills II for non-technical skills and the 'glitch count' for technical performance. All staff in two orthopaedic operating theatres were trained in the principles of SOPs and then assisted to develop standardised procedures. Staff in a control operating theatre underwent the same observations but received no training. The change in difference between active and control groups was compared before and after the intervention using repeated measures analysis of variance. We observed 50 operations before and 55 after the intervention and analysed clinical data on 1022 and 861 operations, respectively. The staff chose to structure their efforts around revising the 'whiteboard' which documented and prompted tasks, rather than directly addressing specific task problems. Although staff preferred and sustained the new system, we found no significant differences in process or outcome measures before/after intervention in the active versus the control group. There was a secular trend towards worse outcomes in the postintervention period, seen in both active and control theatres. SOPs when developed and introduced by frontline staff do not necessarily improve operative processes or outcomes. The inherent tension in improvement work between giving staff ownership of improvement and maintaining control of direction needs to be managed, to ensure staff are engaged but invest energy in appropriate change. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Light-Emitting Diodes (LED) for Primary Animal Habitat Lighting in Highly Controlled Environments

NASA Technical Reports Server (NTRS)

Winget, C. M.; Syrkin, N.; Heeke, D.; Mele, G.; Holley, D. C.; Dalton, Bonnie P. (Technical Monitor)

1996-01-01

Significant alterations in Biological Clock responses have been reported following sidereal time changes (e.g., Jet-lag), and exposure to microgravity (e.g., daytime sleepiness). Additionally, light reduces circulating melatonin (spectral specificity greatest between 450-500 nm). It was hypothesized that LEDs can replace the current light sources used in zero gravity and terrestrial research laboratories because of their small size, low mass, low energy consumption and long functional life. This report evaluates the capacity of LEDs to entrain the circadian system of rats as judged by measurement of overt behavioral circadian rhythms (activity, feeding, drinking). These data were collected in highly controlled environments similar to the shuttle Animal Enclosure Modules. Two groups were compared: control - animals exposed to standard cool-white fluorescent lights, and test - animals exposed to LEDs with a spectral power distribution matching the fluorescent lights. Gross locomotor activity, feeding and drinking frequencies were continuously monitored and stored at 10 minute intervals. Animals were exposed to the following photoperiods: 28 days of 12L:12D, 19 days of 24L:0D and 16 days of 12L:12D. Light intensities tested varied between 0.1 to 100 lux. Rats received food and water ad libitum, and temperature and humidity were controlled throughout the study. The general health status of all rats was acceptable for each day of this study. No incidents of aggressive behavior were observed. Growth, locomotor activity, food and water consumption were comparable for all groups of animals, i.e, the circadian characteristics of the animals under these conditions were comparable. These results indicate that LED arrays are as effective in maintaining circadian rhythm stability as the commonly used cool-white fluorescent light sources. LEDs with their flexible spectrum, low energy requirements and minimal heat production have advantages for some chronopharmacology studies and for microgravity animal habitats.

Randomized controlled trial of peer-led recovery education using Building Recovery of Individual Dreams and Goals through Education and Support (BRIDGES).

PubMed

Cook, Judith A; Steigman, Pamela; Pickett, Sue; Diehl, Sita; Fox, Anthony; Shipley, Patricia; MacFarlane, Rachel; Grey, Dennis D; Burke-Miller, Jane K

2012-04-01

The purpose of this study was to test the efficacy of a peer-led, mental illness education intervention called Building Recovery of Individual Dreams and Goals through Education and Support (BRIDGES). Subjects were recruited from outpatient community mental health settings in eight Tennessee communities. Using a single-blind, randomized controlled trial design, 428 individuals with serious mental illness (SMI) were interviewed at baseline and assigned to BRIDGES or to a services as usual wait list control condition. Two-and-one-half hour classes were taught once a week for 8 weeks by peers who were certified BRIDGES instructors. Subjects were followed-up at immediate post-intervention and 6-months later. The primary outcome was self-perceived recovery, measured by the Recovery Assessment Scale (RAS). A secondary outcome was hopefulness as assessed by the State Hope Scale (SHS). An exploratory hypothesis examined the impact of depressive symptoms on both recovery outcomes. Eighty six percent of participants were followed up. On average, participants attended five sessions. Intent-to-treat analysis using mixed-effects random regression found that, compared to controls, intervention participants reported: 1) significantly greater improvement in total RAS scores as well as subscales measuring personal confidence and tolerable symptoms; and 2) significantly greater improvement in hopefulness as assessed by the agency subscale of the SHS. While study subjects with high levels of depressive symptoms had significantly poorer outcomes, outcomes were superior for BRIDGES participants regardless of depressive symptoms. Peer-led mental illness education improves participants' self-perceived recovery and hopefulness over time, even controlling for severity of depressive symptoms. Copyright © 2011 Elsevier B.V. All rights reserved.

Anti-proliferation effect of blue light-emitting diodes against antibiotic-resistant Helicobacter pylori.

PubMed

Ma, Jianwei; Hiratsuka, Takahiro; Etoh, Tsuyoshi; Akada, Junko; Fujishima, Hajime; Shiraishi, Norio; Yamaoka, Yoshio; Inomata, Masafumi

2017-12-07

Infection by Helicobacter pylori is implicated in a wide range of upper gastrointestinal diseases. Owing to the rapid emergence of antibiotic-resistant strains of H. pylori, the development of novel treatment modalities for antibiotic-resistant H. pylori infection is a key priority. Blue light-emitting diodes (LED) may represent a unique option owing to their antimicrobial effect. In this study, we aimed to evaluate the anti-proliferative effect of blue LED against antibiotic-resistant H. pylori. Ten antibiotic-resistant strains and one sensitive H. pylori strain were used in this study. After irradiation by blue LED along time course, the viability of H. pylori was evaluated by enumerating colony forming units. Morphological changes in H. pylori were observed using a scanning electron microscope. Reductase activity was measured as an indicator of bacterial cellular activity. Total reactive oxygen species was monitored using fluorescence intensity and fluorescence microscope imaging. After irradiation by blue LED, the numbers of H. pylori in all the strains were significantly reduced compared with control group. The H. pylori exhibited a short rod-shaped morphology after irradiation; no such change was observed in H. pylori not exposed to blue LED. Re-irradiation of surviving strain after the initial irradiation also exhibited the same anti-proliferation effect. After blue LED irradiation, bacterial cellular activity was lower, and total reactive oxygen species production was significantly higher in blue LED group, compared with that in control. Blue LED could be a new treatment to eradicate infection with antibiotic-resistant H. pylori. © 2017 Journal of Gastroenterology and Hepatology Foundation and John Wiley & Sons Australia, Ltd.

Pocket change: a simple educational intervention increases hospitalist documentation of comorbidities and improves hospital quality performance measures.

PubMed

Sparks, Rachel; Salskov, Alex H; Chang, Anita S; Wentworth, Kelly L; Gupta, Pritha P; Staiger, Thomas O; Anawalt, Bradley D

2015-01-01

Complete documentation of patient comorbidities in the medical record is important for clinical care, hospital reimbursement, and quality performance measures. We designed a pocket card reminder and brief educational intervention aimed at hospitalists with the goal of improving documentation of 6 common comorbidities present on admission: coagulation abnormalities, metastatic cancer, anemia, fluid and electrolyte abnormalities, malnutrition, and obesity. Two internal medicine inpatient teams led by 10 hospitalist physicians at an academic medical center received the educational intervention and pocket card reminder (n = 520 admissions). Two internal medicine teams led by nonhospitalist physicians served as a control group (n = 590 admissions). Levels of documentation of 6 common comorbidities, expected length of stay, and expected mortality were measured at baseline and during the 9-month study period. The intervention was associated with increased documentation of anemia, fluid and electrolyte abnormalities, malnutrition, and obesity in the intervention group, both compared to baseline and compared to the control group during the study period. The expected length of stay increased in the intervention group during the study period. A simple educational intervention and pocket card reminder were associated with improved documentation and hospital quality measures at an academic medical center.

Adaptive control with self-tuning for non-invasive beat-by-beat blood pressure measurement.

PubMed

Nogawa, Masamichi; Ogawa, Mitsuhiro; Yamakoshi, Takehiro; Tanaka, Shinobu; Yamakoshi, Ken-ichi

2011-01-01

Up to now, we have successfully carried out the non-invasive beat-by-beat measurement of blood pressure (BP) in the root of finger, superficial temporal and radial artery based on the volume-compensation technique with reasonable accuracy. The present study concerns with improvement of control method for this beat-by-beat BP measurement. The measurement system mainly consists of a partial pressurization cuff with a pair of LED and photo-diode for the detection of arterial blood volume, and a digital self-tuning control method. Using healthy subjects, the performance and accuracy of this system were evaluated through comparison experiments with the system using a conventional empirically tuned PID controller. The significant differences of BP measured in finger artery were not showed in systolic (SBP), p=0.52, and diastolic BP (DBP), p=0.35. With the advantage of the adaptive control with self-tuning method, which can tune the control parameters without disturbing the control system, the application area of the non-invasive beat-by-beat measurement method will be broadened.

Application of the light emitting diodes (LEDs) in optical measurements

NASA Astrophysics Data System (ADS)

Sabinin, Vladimir E.; Savelyev, Sergey K.; Solk, Sergey V.

2003-06-01

At current moment the Light Emitting Diodes (LED) have found a great amount of applications in different areas -- for location and communication systems, optical information systems, in architecture light decoration and advertising, traffic signals, etc. In current work we are making attempt to analyze some new possible fields of LED application. Among these may be build in systems of photometry control. Many different optic and optoelectronic systems are in need of such devices, able to operate for a long time in an autonomous regime. LED's and especially optocouples on their base can provide required time stability and spectral characteristics. The main drawback of such elements is the particularity of the emission diagram. In many case it has unpredictable form, but high reliability and very simple design may compensate many of LED's drawbacks. Below are analyzed the optical schemes enabling transformation of the semiconductor crystal in visible and IR ranges into the beams with angular divergence of 2 degrees. From one crystal, having diameter less than 1 mm was gained the axial light power exceeding 1000 cd and it is possible to form the light sources providing light power up to 50 - 100 W/str. If to take into account that LED have narrow spectral band and high stability of this spectral band, their small dimensions, rather high efficiency, a possibility of intensity modulation by supply current it is very promising to apply these devices for system of buid in control. Such possibility was not realized in full up till now.

Enhanced Automated Guidance System for Horizontal Auger Boring Based on Image Processing

PubMed Central

Wu, Lingling; Wen, Guojun; Wang, Yudan; Huang, Lei; Zhou, Jiang

2018-01-01

Horizontal auger boring (HAB) is a widely used trenchless technology for the high-accuracy installation of gravity or pressure pipelines on line and grade. Differing from other pipeline installations, HAB requires a more precise and automated guidance system for use in a practical project. This paper proposes an economic and enhanced automated optical guidance system, based on optimization research of light-emitting diode (LED) light target and five automated image processing bore-path deviation algorithms. An LED target was optimized for many qualities, including light color, filter plate color, luminous intensity, and LED layout. The image preprocessing algorithm, feature extraction algorithm, angle measurement algorithm, deflection detection algorithm, and auto-focus algorithm, compiled in MATLAB, are used to automate image processing for deflection computing and judging. After multiple indoor experiments, this guidance system is applied in a project of hot water pipeline installation, with accuracy controlled within 2 mm in 48-m distance, providing accurate line and grade controls and verifying the feasibility and reliability of the guidance system. PMID:29462855

Enhanced Automated Guidance System for Horizontal Auger Boring Based on Image Processing.

PubMed

Wu, Lingling; Wen, Guojun; Wang, Yudan; Huang, Lei; Zhou, Jiang

2018-02-15

Horizontal auger boring (HAB) is a widely used trenchless technology for the high-accuracy installation of gravity or pressure pipelines on line and grade. Differing from other pipeline installations, HAB requires a more precise and automated guidance system for use in a practical project. This paper proposes an economic and enhanced automated optical guidance system, based on optimization research of light-emitting diode (LED) light target and five automated image processing bore-path deviation algorithms. An LED light target was optimized for many qualities, including light color, filter plate color, luminous intensity, and LED layout. The image preprocessing algorithm, direction location algorithm, angle measurement algorithm, deflection detection algorithm, and auto-focus algorithm, compiled in MATLAB, are used to automate image processing for deflection computing and judging. After multiple indoor experiments, this guidance system is applied in a project of hot water pipeline installation, with accuracy controlled within 2 mm in 48-m distance, providing accurate line and grade controls and verifying the feasibility and reliability of the guidance system.

Searching for the self: an identity control theory approach to triggers of occupational exploration.

PubMed

Anderson, Katherine L; Mounts, Nina S

2012-01-01

Identity control theory researchers have found evidence for two processes of identity development (identity defense and identity change) and have theorized a third process (identity exploration). College students (N = 123) self-rated as high or low in occupational identity certainty and importance received self-discrepant feedback to induce identity disturbance, and dependent measures of identity defense, identity change, and identity exploration were obtained. As predicted, high certainty about identity standards led to identity defense, while low certainty led to identity change. Although an interaction between certainty and importance was hypothesized to predict identity exploration, results showed that the two operated independently. Low certainty predicted exploration of additional occupational areas, whereas high importance predicted exploration of self, environment, and additional occupational areas.

Multicolour LEDs in educational demonstrations of physics and optometry

NASA Astrophysics Data System (ADS)

Paulins, Paulis; Ozolinsh, Maris

2014-07-01

LED light sources are used to design experimental setup for university courses teaching human color vision. The setup allows to demonstrate various vision characteristics and to apply for student practical exercises to study eye spectral sensitivity in different spectral range using heterochromatic flicker photometry. Technique can be used in laboratory works for students to acquire knowledge in visual perception, basics of electronics and measuring, or it can be applied as fully computer control experiment. Besides studies of the eye spectral sensitivity students can practice in trichromatic color matching and other visual perception tasks

GATEWAY Demonstrations: Tuning Hospital Lighting: Evaluating Tunable LED Lighting at the Swedish Hospital Behavioral Health Unit in Seattle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkerson, Andrea; Davis, Robert G.; Clark, Edward

The GATEWAY program evaluated a tunable LED lighting system installed in the new Swedish Medical Behavioral Health Unit in Seattle that incorporates color-tunable luminaires in common areas, and uses advanced controls for dimming and color tuning, with the goal of providing a better environment for staff and patients. The report reviews the design of the tunable lighting system, summarizes two sets of measurements, and discusses the circadian, energy, and commissioning implications as well as lessons learned from the project.

GATEWAY Report Brief: Evaluating Tunable LED Lighting in the Swedish Medical Behavioral Health Unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

Summary of a GATEWAY report evaluation of a tunable LED lighting system installed in the new Swedish Medical Behavioral Health Unit in Seattle that incorporates color-tunable luminaires in common areas, and uses advanced controls for dimming and color tuning, with the goal of providing a better environment for staff and patients. The report reviews the design of the tunable lighting system, summarizes two sets of measurements, and discusses the circadian, energy, and commissioning implications as well as lessons learned from the project.

Bone Analyzer

NASA Technical Reports Server (NTRS)

1985-01-01

The danger of disuse osteoporosis under weightless condition in space led to extensive research into measurements of bone stiffness and mass by the Biomedical Research Division of Ames and Stanford University. Through its Technology Utilization Program, NASA funded an advanced SOBSA, a microprocessor-controlled bone probe system. SOBSA determines bone stiffness by measuring responses to an electromagnetic shaker. With this information, a physician can identify bone disease, measure deterioration and prescribe necessary therapy. The system is now undergoing further testing.

Community-based peer-led diabetes self-management: a randomized trial.

PubMed

Lorig, Kate; Ritter, Philip L; Villa, Frank J; Armas, Jean

2009-01-01

The purpose of this study is to determine the effectiveness of a community-based diabetes self-management program comparing treatment participants to a randomized usual-care control group at 6 months. A total of 345 adults with type 2 diabetes but no criteria for high A1C were randomized to a usual-care control group or 6-week community-based, peer-led diabetes self-management program (DSMP). Randomized participants were compared at 6 months. The DSMP intervention participants were followed for an additional 6 months (12 months total). A1C and body mass index were measured at baseline, 6 months, and 12 months. All other data were collected by self-administered questionnaires. At 6 months, DSMP participants did not demonstrate improvements in A1C as compared with controls. Baseline A1C was much lower than in similar trials. Participants did have significant improvements in depression, symptoms of hypoglycemia, communication with physicians, healthy eating, and reading food labels (P < .01). They also had significant improvements in patient activation and self-efficacy. At 12 months, DSMP intervention participants continued to demonstrate improvements in depression, communication with physicians, healthy eating, patient activation, and self-efficacy (P < .01). There were no significant changes in utilization measures. These findings suggest that people with diabetes without elevated A1C can benefit from a community-based, peer-led diabetes program. Given the large number of people with diabetes and lack of low-cost diabetes education, the DSMP deserves consideration for implementation.

An optrode for photometric detection of ammonia in air

NASA Astrophysics Data System (ADS)

Buzanovskii, V. A.

2017-10-01

A scheme of constructing an LED optrode for photometric detection of ammonia in air is considered. The components of the device are (1) a glass plate coated with a film of polydimethylsiloxane with an ion-coupled cation of brilliant-green dye, (2) an LED emitting at a wavelength of 655 nm, and (3) a metal housing. The nominal static conversion function, sensitivity, and relative measurement error of the device are analyzed on the basis of mathematical modeling. The obtained results allow one to design an LED optrode capable of carrying out control for automated technological processes, solving problems in the area of security, etc. The device provides the ability to create photometric gas analyzers of ammonia with small overall dimensions, power consumption, and cost.

The total spectral radiant flux calibration using a spherical spectrometer at National Institute of Metrology China

NASA Astrophysics Data System (ADS)

Zhao, Weiqiang; Liu, Hui; Liu, Jian

2016-11-01

At present day, in the field of lighting the incandescent lamps are phasing out. The solid state lighting products, i.e. LED, and the related market are developing very fast in China for its promising application, due to the energy-saving and the colorful features. For the quality control and the commercial trade purpose, it is highly necessary to measure the optical parameters of LED light sources with a fast, easy and affordable facility. Therefore, more test labs use the spherical spectrometer to measure LED. The quasi- monochrome of LED and the V(lambda) of silicon photodetector mismatch problem is reduced or avoided, because the total spectral radiant flux (TSRF) is measured, and all the optical parameters are calculate from the TSRF. In such a way, the spherical spectrometer calibration requires TSRF standard lamps instead of the traditional total flux standard lamps. National Institute of Metrology China (NIM) has studied and developed the facilities for TSRF measurement and provides related calibration services. This paper shows the TSRF standard lamp calibration procedure using a spherical spectrometer in every-day calibration and its traceable link to the primary SI unit at NIM. The sphere is of 1.5 m diameter, and installed with a spectrometer and a silicon photodetector. It also shows the detail of data process, such as the spectral absorption correction method and the calculation of the result derived from the spectral readings. The TSRF calibration covers the spectra range of 350 nm to 1050 nm, with a measurement uncertainty of 3.6% 1.8% (k=2).

Peer-led prenatal breast-feeding education: a viable alternative to nurse-led education.

PubMed

Rempel, Lynn A; Moore, Katrina C J

2012-02-01

To evaluate a prenatal breast-feeding class developed and facilitated by peer Breast-feeding Buddies. Non-equivalent control group quasi-experimental study comparing participants of the peer-led class (PLC) to those attending an established hospital-based breast-feeding nurse-led class (NLC). A brief questionnaire was completed immediately prior to the class, and telephone interviews were conducted approximately one week following the class, and one and six months post partum. 54 expectant mothers who registered for the community PLC and 55 expectant mothers who registered for the NLC. Breast-feeding intentions were measured at all time-points. Class evaluations, breast-feeding experiences, and breast-feeding support were measured at all post-class interviews. Both classes were considered worthwhile, but the PLC class was rated as more helpful and participants appreciated learning from the peers' personal experiences. Mothers taught by peers were more likely to access peer breast-feeding support. PLC participants initially decreased their prenatal breast-feeding duration intentions but had significantly stronger intentions to continue breast feeding at six months than did NLC mothers. A peer-led prenatal breast-feeding class is as effective as a traditional model of breast-feeding education and is a valuable tool to promote and support successful breast feeding. RECOMMENDATIONS FOR PRACTICE: Peer-led breast-feeding classes should be provided to enhance the accessibility of breast-feeding education and support for expectant mothers. Copyright © 2010 Elsevier Ltd. All rights reserved.

Getting the balance right: a randomised controlled trial of physiotherapy and Exercise Interventions for ambulatory people with multiple sclerosis.

PubMed

Coote, Susan; Garrett, Maria; Hogan, Neasa; Larkin, Aidan; Saunders, Jean

2009-07-16

People with Multiple Sclerosis have a life long need for physiotherapy and exercise interventions due to the progressive nature of the disease and their greater risk of the complications of inactivity. The Multiple Sclerosis Society of Ireland run physiotherapy, yoga and exercise classes for their members, however there is little evidence to suggest which form of physical activity optimises outcome for people with the many and varied impairments associated with MS. This is a multi-centre, single blind, block randomised, controlled trial. Participants will be recruited via the ten regional offices of MS Ireland. Telephone screening will establish eligibility and stratification according to the mobility section of the Guys Neurological Disability Scale. Once a block of people of the same strand in the same geographical region have given consent, participants will be randomised. Strand A will concern individuals with MS who walk independently or use one stick to walk outside. Participants will be randomised to yoga, physiotherapy led exercise class, fitness instructor led exercise class or to a control group who don't change their exercise habits.Strand B will concern individuals with MS who walk with bilateral support or a rollator, they may use a wheelchair for longer distance outdoors. Participants will be randomised to 1:1 Physiotherapist led intervention, group intervention led by Physiotherapist, group yoga intervention or a control group who don't change their exercise habits. Participants will be assessed by physiotherapist who is blind to the group allocation at week 1, week 12 (following 10 weeks intervention or control), and at 12 week follow up. The primary outcome measure for both strands is the Multiple Sclerosis Impact Scale. Secondary outcomes are Modified Fatigue Impact Scale, 6 Minute Walk test, and muscle strength measured with hand held dynamometry. Strand B will also use Berg Balance Test and the Modified Ashworth Scale. Confounding variables such as sensation, coordination, proprioception, range of motion and other impairments will be recorded at initial assessment. Data analysis will analyse change in each group, and the differences between groups. Sub group analysis may be performed if sufficient numbers are recruited. ISRCTN77610415.

A dual-wavelength light-emitting diode based detector for flow-injection analysis process analysers.

PubMed

Huang, J; Liu, H; Tan, A; Xu, J; Zhao, X

1992-06-01

In this paper, a small dual-wavelength light-emitting diode (LED) based detector for FIA process analysers is designed. The detector's optical parts include a flow cell, a dual-wavelength LED and a photodiode. Neither mirrors nor lenses are used. The optical paths for the different light beams are almost the same, distinguishing it from previously reported LED based detectors. The detector's electronic components, including a signal amplifier, an A/D and D/A converter, and an Intel 8031 single-chip microcomputer, are integrated on one small board. In order to obtain response signals of approximate intensity for the two colours, the D/A converter and a multiplexer are used to adjust the emission intensity of the two colours respectively. Under microcomputer control, light beams are rapidly electronically modulated. Therefore, dark current and intensity of the light beams are measured almost simultaneously; as a result, the effect of drift is negligible. While a solution of absorbance 0.875 was measured repeatedly, an RSD (relative standard deviation) of 0.24% could be reached. Furthermore, such a detector with a red/yellow LED has been coupled with the FIA technique for the determination of 10(-6)M levels of cobalt.

Growth response of dominant and co-dominant loblolly pines to organic matter removal, soil compaction, and competition control

Treesearch

Robert Eaton; William Smith; Kim Ludovici

2010-01-01

The Long Term Soil Productivity (LTSP) experiment is a U.S. Forest Service led effort to test the effects that organic matter removal, soil compaction, and competition control have forest soil productivity, as measured by tree growth. A replicated experiment was installed on the Croatan National Forest, NC, in winter 1991 and loblolly pine (Pinus taeda...

Designing low cost LED display for the billboard

NASA Astrophysics Data System (ADS)

Hong, Yi-Jian; Uang, Chii-Maw; Wang, Ping-Chieh; Ho, Zu-Sheng

2011-10-01

With quickly advance of the computer, microelectronics and photonics technologies, LED display panel becomes a new electronic advertising media. It can be used to show any information whatever characters or graphics. Most LED display panels are built of many Light-Emitting Diodes arranged in a matrix form. The display has many advantages such as low power, low cost, long life and high definition. Because the display panel is asked to show rich color, the LED display panel's driving system becomes very complex. The design methodology of LED display panel's driver becomes more and more important to meet the market requirements. Cost is always the most important issue in public market domain. In this paper, we report a design methodology of LED display panel's driver based on the microprocessor control unit (MCU) system and LED display controller IC, HT1632C, to control three colors, RGB, color LED display panel and the modular panel size is 24*16 in matrix form. The HT1632C is a memory mapping LED display controller, it can be used on many applications, such as digital clock, thermometer, counter, voltmeter or other instrumentation readouts. Three pieces of HT1632C are used to drive a 24*16 RGB LED display panel, in our design case. Each HT163C chip is used to control one of the R, G and B color. As the drive mode is driven in DC mode, the RGB display panel can create and totally of seven colors under the control of MCU. The MCU generates the control signal to drive HT1632C. In this study, the software design methodology is adopted with dynamic display principle. When the scan frequency is 60Hz, LED display panel will get the clear picture and be able to display seven colors.

Retail lighting and packaging influence consumer acceptance of fluid milk.

PubMed

Potts, H L; Amin, K N; Duncan, S E

2017-01-01

Little is known about the effect of retail light-emitting diode (LED) exposure on consumer acceptance of milk. The study objective was to determine effects of fluorescent and LED lighting under retail storage conditions on consumer acceptance of milk. Consumer acceptance of milk stored under retail conditions was determined through sensory evaluation (2 studies; n=150+ each) and analytical measures (dissolved oxygen, secondary oxidation products, riboflavin retention). Study 1 evaluated milk stored in high-density polyethylene (HDPE) packages for 4h under LED light (960 lx). Commercially available HDPE package treatments included translucent HDPE (most commonly used), white HDPE [low concentration (1.3%) TiO 2 ], and yellow HDPE; in addition, HDPE with a higher TiO 2 concentration (high white; 4.9% TiO 2 ) and a foil-wrapped translucent HDPE (control) were tested. Translucent and control packages also were tested under fluorescent light. Study 2 evaluated polyethylene terephthalate (PET) packages for 4h under fluorescent and LED light (1,460 lx). The PET packaging included 2 treatments (medium, 4.0% TiO 2 ; high, 6.6% TiO 2 ) as well as translucent HDPE (exposed to fluorescent), clear PET (fluorescent and LED), and light-protected control. Overall mean acceptability of milk ranged from "like slightly" to "like moderately" with significantly lower acceptability for milk exposed to fluorescent light. Milk in HDPE and PET packages had comparable overall acceptability scores when exposed to LED light. Only the fluorescent light condition (both PET and HDPE) diminished overall acceptability. Fluorescent light exposure negatively influenced flavor with significant penalty (2.0-2.5 integers) to overall acceptability of milk in translucent HDPE and clear PET. The LED also diminished aftertaste of milk packaged in translucent HDPE. Changes in dissolved oxygen content, as an indication of oxidation, supported the observed differences in consumer acceptance of milk stored under fluorescent and LED light. Consumers like the flavor of fresh milk, which can be protected by selecting appropriate packaging that blocks detrimental light wavelengths. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Measuring the Photocatalytic Breakdown of Crystal Violet Dye using a Light Emitting Diode Approach

NASA Technical Reports Server (NTRS)

Ryan, Robert E.; Underwood, Lauren W.; O'Neal, Duane; Pagnutti, Mary; Davis, Bruce A.

2009-01-01

A simple method to estimate the photocatalytic reactivity performance of spray-on titanium dioxide coatings for transmissive glass surfaces was developed. This novel technique provides a standardized method to evaluate the efficiency of photocatalytic material systems over a variety of illumination levels. To date, photocatalysis assessments have generally been conducted using mercury black light lamps. Illumination levels for these types of lamps are difficult to vary, consequently limiting their use for assessing material performance under a diverse range of simulated environmental conditions. This new technique uses an ultraviolet (UV) gallium nitride (GaN) light emitting diode (LED) array instead of a traditional black light to initiate and sustain photocatalytic breakdown. This method was tested with a UV-resistant dye (crystal violet) applied to a titanium dioxide coated glass slide. Experimental control is accomplished by applying crystal violet to both titanium dioxide coated slides and uncoated control slides. A slide is illuminated by the UV LED array, at various light levels representative of outdoor and indoor conditions, from the dye side of the slide. To monitor degradation of the dye over time, a temperature-stabilized white light LED, whose emission spectrum overlaps with the dye absorption spectrum, is used to illuminate the opposite side of the slide. Using a spectrometer, the amount of light from the white light LED transmitted through the slide as the dye degrades is monitored as a function of wavelength and time and is subsequently analyzed. In this way, the rate of degradation for photocatalytically coated versus uncoated slide surfaces can be compared. Results demonstrate that the dye absorption decreased much more rapidly on the photocatalytically coated slides than on the control uncoated slides, and that dye degradation is dependent on illumination level. For photocatalytic activity assessment purposes, this experimental configuration and methodology minimizes many external variable effects and enables small changes in absorption to be measured. This research also compares the advantages of this innovative LED light source design over traditional mercury black light systems and non- LED lamp approaches. This novel technology begins to address the growing need for a standard method that can assess the performance of photocatalytic materials before deployment for large scale, real world use.

Protocol for a multi-centre randomised controlled trial comparing arthroscopic hip surgery to physiotherapy-led care for femoroacetabular impingement (FAI): the Australian FASHIoN trial.

PubMed

Murphy, Nicholas J; Eyles, Jillian; Bennell, Kim L; Bohensky, Megan; Burns, Alexander; Callaghan, Fraser M; Dickenson, Edward; Fary, Camdon; Grieve, Stuart M; Griffin, Damian R; Hall, Michelle; Hobson, Rachel; Kim, Young Jo; Linklater, James M; Lloyd, David G; Molnar, Robert; O'Connell, Rachel L; O'Donnell, John; O'Sullivan, Michael; Randhawa, Sunny; Reichenbach, Stephan; Saxby, David J; Singh, Parminder; Spiers, Libby; Tran, Phong; Wrigley, Tim V; Hunter, David J

2017-09-26

Femoroacetabular impingement syndrome (FAI), a hip disorder affecting active young adults, is believed to be a leading cause of hip osteoarthritis (OA). Current management approaches for FAI include arthroscopic hip surgery and physiotherapy-led non-surgical care; however, there is a paucity of clinical trial evidence comparing these approaches. In particular, it is unknown whether these management approaches modify the future risk of developing hip OA. The primary objective of this randomised controlled trial is to determine if participants with FAI who undergo hip arthroscopy have greater improvements in hip cartilage health, as demonstrated by changes in delayed gadolinium-enhanced magnetic resonance imaging (MRI) of cartilage (dGEMRIC) index between baseline and 12 months, compared to those who undergo physiotherapy-led non-surgical management. This is a pragmatic, multi-centre, two-arm superiority randomised controlled trial comparing hip arthroscopy to physiotherapy-led management for FAI. A total of 140 participants with FAI will be recruited from the clinics of participating orthopaedic surgeons, and randomly allocated to receive either surgery or physiotherapy-led non-surgical care. The surgical intervention involves arthroscopic FAI surgery from one of eight orthopaedic surgeons specialising in this field, located in three different Australian cities. The physiotherapy-led non-surgical management is an individualised physiotherapy program, named Personalised Hip Therapy (PHT), developed by a panel to represent the best non-operative care for FAI. It entails at least six individual physiotherapy sessions over 12 weeks, and up to ten sessions over six months, provided by experienced musculoskeletal physiotherapists trained to deliver the PHT program. The primary outcome measure is the change in dGEMRIC score of a ROI containing both acetabular and femoral head cartilages at the chondrolabral transitional zone of the mid-sagittal plane between baseline and 12 months. Secondary outcomes include patient-reported outcomes and several structural and biomechanical measures relevant to the pathogenesis of FAI and development of hip OA. Interventions will be compared by intention-to-treat analysis. The findings will help determine whether hip arthroscopy or an individualised physiotherapy program is superior for the management of FAI, including for the prevention of hip OA. Australia New Zealand Clinical Trials Registry reference: ACTRN12615001177549 . Trial registered 2/11/2015 (retrospectively registered).

Community health workers improve disease control and medication adherence among patients with diabetes and/or hypertension in Chiapas, Mexico: an observational stepped-wedge study

PubMed Central

Franke, Molly F; Arrieta, Jafet; Carrasco, Hector; Elliott, Patrick; Flores, Hugo; Friedman, Alexandra; Graham, Sophia; Martinez, Luis; Palazuelos, Lindsay; Savage, Kevin; Tymeson, Hayley; Palazuelos, Daniel

2018-01-01

Background Non-communicable diseases (NCDs) contribute greatly to morbidity and mortality in low-income and middle-income countries (LMICs). Community health workers (CHWs) may improve disease control and medication adherence among patients with NCDs in LMICs, but data are lacking. We assessed the impact of a CHW-led intervention on disease control and adherence among patients with diabetes and/or hypertension in Chiapas, Mexico. Methods We conducted a prospective observational study among adult patients with diabetes and/or hypertension, in the context of a stepped-wedge roll-out of a CHW-led intervention. We measured self-reported adherence to medications, blood pressure and haemoglobin A1c at baseline and every 3 months, timed just prior to expansion of the intervention to a new community. We conducted individual-level mixed effects analyses of study data, adjusting for time and clustering by patient and community. Findings We analysed 108 patients. The CHW-led intervention was associated with a twofold increase in the odds of disease control (OR 2.04, 95% CI 1.15 to 3.62). It was also associated with optimal adherence assessed by 30-day recall (OR 1.86; 95% CI 1.15 to 3.02) and a positive self-assessment of adherence behaviour (OR 2.29; 95% CI 1.26 to 4.15), but not by 5-day recall. Interpretation A CHW-led adherence intervention was associated with disease control and adherence among adults with diabetes and/or hypertension. This study supports a role of CHWs in supplementing comprehensive primary care for patients with NCDs in LMICs. Trial registration number NCT02549495. PMID:29527344

The long-term effects of a peer-led sex education programme (RIPPLE): a cluster randomised trial in schools in England.

PubMed

Stephenson, Judith; Strange, Vicki; Allen, Elizabeth; Copas, Andrew; Johnson, Anne; Bonell, Chris; Babiker, Abdel; Oakley, Ann

2008-11-25

Peer-led sex education is widely believed to be an effective approach to reducing unsafe sex among young people, but reliable evidence from long-term studies is lacking. To assess the effectiveness of one form of school-based peer-led sex education in reducing unintended teenage pregnancy, we did a cluster (school) randomised trial with 7 y of follow-up. Twenty-seven representative schools in England, with over 9,000 pupils aged 13-14 y at baseline, took part in the trial. Schools were randomised to either peer-led sex education (intervention) or to continue their usual teacher-led sex education (control). Peer educators, aged 16-17 y, were trained to deliver three 1-h classroom sessions of sex education to 13- to 14-y-old pupils from the same schools. The sessions used participatory learning methods designed to improve the younger pupils' skills in sexual communication and condom use and their knowledge about pregnancy, sexually transmitted infections (STIs), contraception, and local sexual health services. Main outcome measures were abortion and live births by age 20 y, determined by anonymised linkage of girls to routine (statutory) data. Assessment of these outcomes was blind to sex education allocation. The proportion of girls who had one or more abortions before age 20 y was the same in each arm (intervention, 5.0% [95% confidence interval (CI) 4.0%-6.3%]; control, 5.0% [95% CI 4.0%-6.4%]). The odds ratio (OR) adjusted for randomisation strata was 1.07 (95% CI 0.80-1.42, p = 0.64, intervention versus control). The proportion of girls with one or more live births by 20.5 y was 7.5% (95% CI 5.9%-9.6%) in the intervention arm and 10.6% (95% CI 6.8%-16.1%) in the control arm, adjusted OR 0.77 (0.51-1.15). Fewer girls in the peer-led arm self-reported a pregnancy by age 18 y (7.2% intervention versus 11.2% control, adjusted OR 0.62 [95% CI 0.42-0.91], weighted for non-response; response rate 61% intervention, 45% control). There were no significant differences for girls or boys in self-reported unprotected first sex, regretted or pressured sex, quality of current sexual relationship, diagnosed sexually transmitted diseases, or ability to identify local sexual health services. Compared with conventional school sex education at age 13-14 y, this form of peer-led sex education was not associated with change in teenage abortions, but may have led to fewer teenage births and was popular with pupils. It merits consideration within broader teenage pregnancy prevention strategies.

Effects of a Peer-Led Pain Management Program for Nursing Home Residents with Chronic Pain: A Pilot Study.

PubMed

Tse, Mimi Mun Yee; Yeung, Suey Shuk Yu; Lee, Paul Hong; Ng, Shamay Sheung Mei

2016-09-01

OBJECTIVES : To examine the feasibility of a peer-led pain management program among nursing home residents. DESIGN : A quasi-experimental design. SETTING : Two nursing homes. SUBJECTS : Fifty nursing home residents. METHODS : The experimental group (n = 32) was given a 12-week group-based peer-led pain management program. There were two 1-hour sessions per week. Education in pain and demonstrations of nonpharmacological pain management strategies were provided. The research team and 12 trained peers led the sessions. The control group (n = 18) received one 1-hour session of pain management program each week over 12 weeks from the research team only. Outcome measures for the participants were collected at baseline (P1) and at week 12 (P2). Data from peer volunteers were collected prior to training (V1) and at week 12 (V2). T-tests were used to compare the differences in outcome measures collected at two time points. RESULTS : There was a significant reduction in pain intensity from 5.8 ± 2.6 (P1) to 3.4 ± 2.5 (P2) for the experimental group (p = 0.003) and from 6.3 ± 3.0 (P1) to 3.1 ± 2.4 (P2) for the control group (p = 0.001). Activities of daily living significantly improved for both the experimental group (p = 0.008) and the control group (p = 0.014). There was an enhancement in happiness level for the experimental group (p < 0.001), while the loneliness level dropped significantly for the experimental group (p < 0.001) and the control group (p = 0.031). The peer volunteers showed a significant increase in self-rated pain management knowledge (2.9 ± 2.6 to 8.1 ± 1.2, p < 0.001) and self-efficacy in volunteering (5.8 ± 2.9 to 8.3 ± 1.5, p = 0.032). CONCLUSION : The peer-led pain management program was feasible and has potential in relieving chronic pain and enhancing the physical and psychological health of nursing home residents. © 2016 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Resveratrol Prevents High Fluence Red Light-Emitting Diode Reactive Oxygen Species-Mediated Photoinhibition of Human Skin Fibroblast Migration.

PubMed

Mamalis, Andrew; Koo, Eugene; Isseroff, R Rivkah; Murphy, William; Jagdeo, Jared

2015-01-01

Skin fibrosis is a significant medical problem that leads to a functional, aesthetic, and psychosocial impact on quality-of-life. Light-emitting diode-generated 633-nm red light (LED-RL) is part of the visible light spectrum that is not known to cause DNA damage and is considered a safe, non-invasive, inexpensive, and portable potential alternative to ultraviolet phototherapy that may change the treatment paradigm of fibrotic skin disease. The goal of our study was to investigate the how reactive oxygen species (ROS) free radicals generated by high fluence LED-RL inhibit the migration of skin fibroblasts, the main cell type involved in skin fibrosis. Fibroblast migration speed is increased in skin fibrosis, and we studied cellular migration speed of cultured human skin fibroblasts as a surrogate measure of high fluence LED-RL effect on fibroblast function. To ascertain the inhibitory role of LED-RL generated ROS on migration speed, we hypothesized that resveratrol, a potent antioxidant, could prevent the photoinhibitory effects of high fluence LED-RL on fibroblast migration speed. High fluence LED-RL generated ROS were measured by flow cytometry analysis using dihydrorhodamine (DHR). For purposes of comparison, we assessed the effects of ROS generated by hydrogen peroxide (H2O2) on fibroblast migration speed and the ability of resveratrol, a well known antioxidant, to prevent LED-RL and H2O2 generated ROS-associated changes in fibroblast migration speed. To determine whether resveratrol could prevent the high fluence LED-RL ROS-mediated photoinhibition of human skin fibroblast migration, treated cells were incubated with resveratrol at concentrations of 0.0001% and 0.001% for 24 hours, irradiated with high fluences LED-RL of 480, 640, and 800 J/cm2. High fluence LED-RL increases intracellular fibroblast ROS and decreases fibroblast migration speed. LED-RL at 480, 640 and 800 J/cm2 increased ROS levels to 132.8%, 151.0%, and 158.4% relative to matched controls, respectively. These LED-RL associated increases in ROS were prevented by pretreating cells with 0.0001% or 0.001% resveratrol. Next, we quantified the effect of hydrogen peroxide (H2O2)-associated ROS on fibroblast migration speed, and found that while H2O2-associated ROS significantly decreased relative fibroblast migration speed, pretreatment with 0.0001% or 0.001% resveratrol significantly prevented the decreases in migration speed. Furthermore, we found that LED-RL at 480, 640 and 800 J/cm2 decreased fibroblast migration speed to 83.0%, 74.4%, and 68.6% relative to matched controls, respectively. We hypothesized that these decreases in fibroblast migration speed were due to associated increases in ROS generation. Pretreatment with 0.0001% and 0.001% resveratrol prevented the LED-RL associated decreases in migration speed. High fluence LED-RL increases ROS and is associated with decreased fibroblast migration speed. We provide mechanistic support that the decreased migration speed associated with high fluence LED-RL is mediated by ROS, by demonstrating that resveratrol prevents high fluence LED-RL associated migration speed change. These data lend support to an increasing scientific body of evidence that high fluence LED-RL has anti-fibrotic properties. We hypothesize that our findings may result in a greater understanding of the fundamental mechanisms underlying visible light interaction with skin and we anticipate clinicians and other researchers may utilize these pathways for patient benefit.

Dual LED/incandescent security fixture

DOEpatents

Gauna, Kevin Wayne

2005-06-21

A dual LED and incandescent security lighting system uses a hybrid approach to LED illumination. It combines an ambient LED illuminator with a standard incandescent lamp on a motion control sensor. The LED illuminator will activate with the onset of darkness (daylight control) and typically remain on during the course of the night ("always on"). The LED illumination, typically amber, is sufficient to provide low to moderate level lighting coverage to the wall and ground area adjacent to and under the fixture. The incandescent lamp is integrated with a motion control circuit and sensor. When movement in the field of view is detected (after darkness), the incandescent lamp is switched on, providing an increased level of illumination to the area. Instead of an "always on" LED illuminator, the LEDs may also be switched off when the incandescent lamp is switched on.

Accurate chromatic control and color rendering optimization in LED lighting systems using junction temperature feedback

NASA Astrophysics Data System (ADS)

Sisto, Marco Michele; Gauvin, Jonny

2014-09-01

Accurate color control of LED lighting systems is a challenging task: noticeable chromaticity shifts are commonly observed in mixed-color and phosphor converted LEDs due to intensity dimming. Furthermore, the emitted color varies with the LED temperature. We present a novel color control method for tri-chromatic and tetra-chromatic LEDs, which enable to set and maintain the LED emission at a target color, or combination of correlated color temperature (CCT) and intensity. The LED color point is maintained over variations in the LED junctions' temperatures and intensity dimming levels. The method does not require color feedback sensors, so to minimize system complexity and cost, but relies on estimation of the LED junctions' temperatures from the junction voltages. If operated with tetra-chromatic LEDs, the method allows meeting an additional optimization criterion: for example, the maximization of a color rendering metric like the Color Rendering Index (CRI) or the Color Quality Scale (CQS), thus providing a high quality and clarity of colors on the surface illuminated by the LED. We demonstrate the control of a RGBW LED at target D65 white point with CIELAB color difference metric triangle;a,bE < 1 for simultaneous variations of flux from approximately 30 lm to 100 lm and LED heat sink temperature from 25°C to 58°C. In the same conditions, we demonstrate a CCT error <1%. Furthermore, the method allows varying the LED CCT from 5500K to 8000K while maintaining luminance within 1% of target. Further work is ongoing to evaluate the stability of the method over LED aging.

Energy-Saving Tunnel Illumination System Based on LED's Intelligent Control

NASA Astrophysics Data System (ADS)

Guo, Shanshan; Gu, Hanting; Wu, Lan; Jiang, Shuixiu

2011-02-01

At present there is a lot of electric energy wastage in tunnel illumination, whose design is based on the maximum brightness outside and the maximum vehicle speed all year round. LED's energy consumption is low, and the control of its brightness is simple and effective. It can be quickly adjusted between 0-100% of its maximum brightness, and will not affect the service life. Therefore, using LED as tunnel's illumination source, we can achieve a good energy saving effect. According to real-time data acquisition of vehicle speed, traffic flow and brightness outside the tunnel, the auto real-time control of tunnel illumination can be achieved. And the system regulated the LED luminance by means of combination of LED power module and intelligent control module. The tunnel information was detected by inspection equipments, which included luminometer, vehicle detector, and received by RTU(Remote Terminal Unit), then synchronously transmitted to PC. After data processing, RTU emitted the dimming signal to the LED driver to adjust the brightness of LED. Despite the relatively high cost of high-power LED lights, the enormous energy-saving effect and the well-behaved controllability is beyond compare to other lighting devices.

Effects of post-discharge nurse-led telephone supportive care for patients with chronic kidney disease undergoing peritoneal dialysis in China: a randomized controlled trial.

PubMed

Li, Juan; Wang, Huizhen; Xie, Hongzhen; Mei, Guiping; Cai, Wenzhi; Ye, Junsheng; Zhang, Jianlin; Ye, Guirong; Zhai, Huimin

2014-05-01

Patients with end-stage renal failure (ESRF) need integrated health care to maintain a desirable quality of life. Studies suggest that post-discharge nurseled telephone support has a positive effect for patients suffering from chronic diseases. But the post-discharge care is under-developed in mainland China and the effects of post-discharge care on patients with peritoneal dialysis have not been conclusive. The purpose of this study is to test the effectiveness of postdischarge nurse-led telephone support on patients with peritoneal dialysis in mainland China. A randomized controlled trial was conducted in the medical department of a regional hospital in Guangzhou. 135 patients were recruited, 69 in the study group and 66 in the control group. The control group received routine hospital discharge care. The study group received post-discharge nurse-led telephone support. The quality of life (Kidney Disease Quality of Life Short Form, KDQOL-SF), blood chemistry, complication control, readmission and clinic visit rates were observed at three time intervals: baseline before discharge (T1), 6 (T2) and 12 (T3) weeks after discharge. Statistically significant effects were found for symptom/problem, work status, staff encouragement, patient satisfaction and energy/fatigue in KDQOL-SF and 84-day (12-week) clinic visit rates between the two groups. The study group had more significant improvement than the control group for sleep, staff encouragement at both T2 and T3, and pain at T2 and patient satisfaction at T3. No significant differences were observed between the two groups for the baseline measures, other dimensions in KDQOL-SF, blood chemistry, complication control, readmission rates at all time intervals and clinic visit rates at the first two time intervals. Post-discharge nurse-led telephone support for patients undergoing peritoneal dialysis is effective to enhance patients' well-being in the transition from hospital to home in mainland China. Copyright © 2014 International Society for Peritoneal Dialysis.

A Novel Solid State Non-Dispersive Infrared CO2 Gas Sensor Compatible with Wireless and Portable Deployment

PubMed Central

Gibson, Desmond; MacGregor, Calum

2013-01-01

This paper describes development of a novel mid-infrared light emitting diode (LED) and photodiode (PD) light source/detector combination and use within a non-dispersive infrared (NDIR) carbon dioxide gas sensor. The LED/PD based NDIR sensor provides fast stabilisation time (time required to turn on the sensor from cold, warm up, take and report a measurement, and power down again ≈1 second), longevity (>15 years), low power consumption and low cost. Described performance is compatible with “fit and forget” wireless deployed sensors in applications such as indoor air quality monitoring/control & energy conservation in buildings, transport systems, horticultural greenhouses and portable deployment for safety, industrial and medical applications. Fast stabilisation time, low intrinsic power consumption and cycled operation offer typical energy consumption per measurement of mJ's, providing extended operation using battery and/or energy harvesting strategies (measurement interval of ≈ 2 minutes provides >10 years operation from one AA battery). Specific performance data is provided in relation to measurement accuracy and noise, temperature performance, cross sensitivity, measurement range (two pathlength variants are described covering ambient through to 100% gas concentration), comparison with NDIR utilizing thermal source/pyroelectric light source/detector combination and compatibility with energy harvesting. Semiconductor based LED/PD processing together with injection moulded reflective optics and simple assembly provide a route to low cost high volume manufacturing. PMID:23760090

A novel solid state non-dispersive infrared CO2 gas sensor compatible with wireless and portable deployment.

PubMed

Gibson, Desmond; MacGregor, Calum

2013-05-29

This paper describes development of a novel mid-infrared light emitting diode (LED) and photodiode (PD) light source/detector combination and use within a non-dispersive infrared (NDIR) carbon dioxide gas sensor. The LED/PD based NDIR sensor provides fast stabilisation time (time required to turn on the sensor from cold, warm up, take and report a measurement, and power down again ≈1 second), longevity (>15 years), low power consumption and low cost. Described performance is compatible with "fit and forget" wireless deployed sensors in applications such as indoor air quality monitoring/control & energy conservation in buildings, transport systems, horticultural greenhouses and portable deployment for safety, industrial and medical applications. Fast stabilisation time, low intrinsic power consumption and cycled operation offer typical energy consumption per measurement of mJ's, providing extended operation using battery and/or energy harvesting strategies (measurement interval of ≈ 2 minutes provides >10 years operation from one AA battery). Specific performance data is provided in relation to measurement accuracy and noise, temperature performance, cross sensitivity, measurement range (two pathlength variants are described covering ambient through to 100% gas concentration), comparison with NDIR utilizing thermal source/pyroelectric light source/detector combination and compatibility with energy harvesting. Semiconductor based LED/PD processing together with injection moulded reflective optics and simple assembly provide a route to low cost high volume manufacturing.

winderosionnetwork.org – Portal to the National Wind Erosion Research Network

USDA-ARS?s Scientific Manuscript database

The National Wind Erosion Research Network was established in 2014 as a collaborative effort led by the USDA Agricultural Research Service and Natural Resources Conservation Service, and USDI Bureau of Land Management, to address the need for standardized measurements of wind erosion and its control...

Toward Objectivity in Diagnosing Learning Disabilities: Refinement of Established Procedures.

ERIC Educational Resources Information Center

Goodman, Marvin; Mina, Elias

Variability in diagnostic procedures and a lack of valid and reliable measures led to the development of a comprehensive battery, which incorporated an operational definition of learning disabilities. The battery consisted of forms for observing these functions: intelligence, academic achievement, gross and fine motor control, visual perception,…

Superior characteristics of microscale light emitting diodes through tightly lateral oxide-confined scheme

NASA Astrophysics Data System (ADS)

Huang, Shen-Che; Li, Heng; Zhang, Zhe-Han; Chen, Hsiang; Wang, Shing-Chung; Lu, Tien-Chang

2017-01-01

We report on the design of the geometry and chip size-controlled structures of microscale light-emitting diodes (micro-LEDs) with a shallow-etched oxide-refilled current aperture and their performance. The proposed structure, which combines an indium-tin-oxide layer and an oxide-confined aperture, exhibited not only uniform current distribution but also remarkably tight current confinement. An extremely high injection level of more than 90 kA/cm2 was achieved in the micro-LED with a 5-μm aperture. Current spreading and the droop mechanism in the investigated devices were characterized through electroluminescence measurements, optical microscopy, and beam-view imaging. Furthermore, we utilized the β-model and S-model to elucidate current crowding and the efficiency droop phenomenon in the investigated micro-LEDs. The luminescence results evidenced the highly favorable performance of the fabricated micro-LEDs, which is a result of their more uniform current spreading and lower junction temperature relative to conventional LEDs. Moreover, the maximum endured current density could be further increased by reducing the aperture size of the micro-LEDs. The proposed design, which is expected to be beneficial for the development of high-performance array-based micro-LEDs, is practicable through current state-of-the-art processing techniques.

A 1024-channel 6 mW/mm2 optical stimulator for in-vitro neuroscience experiments.

PubMed

Cai, Lei; Wang, Baitong; Huang, Xiuxiang; Yang, Zhi

2014-01-01

Recent optical stimulation technologies allow improved selectivity and have been widely used in neuroscience research. This paper presents an optical stimulator based on high power LEDs. It has 1024 channels and can produce flexible stimulation patterns in each frame, refreshed at above 20 Hz. To increase the light intensity, each LED has an optical package that directs the light into a small angle. To ensure the light of each LED can reach the lens, the LEDs have been specially placed and oriented to the lens. With these efforts, the achieved power efficiency (defined as the mount of LED light power passing through the lens divided by the LED total power consumption) is 5 × 10(-5). In our current prototype, an individual LED unit can source 60 mW electrical power, where the induced irradiance on neural tissues is 6 mW/mm(2) integrating from 460 nm to 480 nm. The light spot is tunable in size from 18 μm to 40 μm with an extra 5-10 μm separation for isolating two adjacent spots. Through both bench-top measurement and finite element simulation, we found the cross channel interference is below 10%. A customized software interface has been developed to control and program the stimulator operation.

A multi-channel photometric detector for multi-component analysis in flow injection analysis

PubMed Central

Tan, Aimin; Huang, Jialin; Geng, Liudi; Xu, Jinhua; Zhao, Xinna

1994-01-01

The detector, a multi-channel photometric detector, described in this paper was developed using multi-wavelength LEDs (light emitting diode) and phototransistors for absorbance measurement controlled by an Intel 8031 8-bit single chip microcomputer. Up to four flow cells can be attached to the detector. The LEDs and phototransistors are both inexpensive, and reliable. The results given by the detector for simultaneous determination of trace amounts of cobalt and cadmium in zinc sulphate electrolyte are reported. Because of the newly developed detector, this approach employs much less hardware apparatus than by employing conventional photometric detectors. PMID:18924688

A multi-channel photometric detector for multi-component analysis in flow injection analysis.

PubMed

Tan, A; Huang, J; Geng, L; Xu, J; Zhao, X

1994-01-01

The detector, a multi-channel photometric detector, described in this paper was developed using multi-wavelength LEDs (light emitting diode) and phototransistors for absorbance measurement controlled by an Intel 8031 8-bit single chip microcomputer. Up to four flow cells can be attached to the detector. The LEDs and phototransistors are both inexpensive, and reliable. The results given by the detector for simultaneous determination of trace amounts of cobalt and cadmium in zinc sulphate electrolyte are reported. Because of the newly developed detector, this approach employs much less hardware apparatus than by employing conventional photometric detectors.

Design of the control system for full-color LED display based on MSP430 MCU

NASA Astrophysics Data System (ADS)

Li, Xue; Xu, Hui-juan; Qin, Ling-ling; Zheng, Long-jiang

2013-08-01

The LED display incorporate the micro electronic technique, computer technology and information processing as a whole, it becomes the most preponderant of a new generation of display media with the advantages of bright in color, high dynamic range, high brightness and long operating life, etc. The LED display has been widely used in the bank, securities trading, highway signs, airport and advertising, etc. According to the display color, the LED display screen is divided into monochrome screen, double color display and full color display. With the diversification of the LED display's color and the ceaseless rise of the display demands, the LED display's drive circuit and control technology also get the corresponding progress and development. The earliest monochrome screen just displaying Chinese characters, simple character or digital, so the requirements of the controller are relatively low. With the widely used of the double color LED display, the performance of its controller will also increase. In recent years, the full color LED display with three primary colors of red, green, blue and grayscale display effect has been highly attention with its rich and colorful display effect. Every true color pixel includes three son pixels of red, green, blue, using the space colour mixture to realize the multicolor. The dynamic scanning control system of LED full-color display is designed based on MSP430 microcontroller technology of the low power consumption. The gray control technology of this system used the new method of pulse width modulation (PWM) and 19 games show principle are combining. This method in meet 256 level grayscale display conditions, improves the efficiency of the LED light device, and enhances the administrative levels feels of the image. Drive circuit used 1/8 scanning constant current drive mode, and make full use of the single chip microcomputer I/O mouth resources to complete the control. The system supports text, pictures display of 256 grayscale full-color LED screen.

High-power LED light sources for optical measurement systems operated in continuous and overdriven pulsed modes

NASA Astrophysics Data System (ADS)

Stasicki, Bolesław; Schröder, Andreas; Boden, Fritz; Ludwikowski, Krzysztof

2017-06-01

The rapid progress of light emitting diode (LED) technology has recently resulted in the availability of high power devices with unprecedented light emission intensities comparable to those of visible laser light sources. On this basis two versatile devices have been developed, constructed and tested. The first one is a high-power, single-LED illuminator equipped with exchangeable projection lenses providing a homogenous light spot of defined diameter. The second device is a multi-LED illuminator array consisting of a number of high-power LEDs, each integrated with a separate collimating lens. These devices can emit R, G, CG, B, UV or white light and can be operated in pulsed or continuous wave (CW) mode. Using an external trigger signal they can be easily synchronized with cameras or other devices. The mode of operation and all parameters can be controlled by software. Various experiments have shown that these devices have become a versatile and competitive alternative to laser and xenon lamp based light sources. The principle, design, achieved performances and application examples are given in this paper.

Measurements of Carbon Monoxide with the MOPITT Instrument 1999-2009

NASA Astrophysics Data System (ADS)

Drummond, J. R.; Gille, J. C.; Edwards, D. P.; Deeter, M. N.; Zou, J.; Nichitiu, F.

2009-12-01

The Measurements Of Pollution In The Troposphere (MOPITT) instrument on the Terra spacecraft is completing ten years of operation measuring carbon monoxide (CO) over the planet. These measurements have demonstrated the changes of CO in both space and time and shown a planet with very large variations in concentrations depending upon events and circumstances. This talk will review the MOPITT dataset and discuss how experience with the MOPITT instrument and with data processing have led to significant improvements in our understanding of the nature of the measurements and their strengths and limitations. These studies have led to improvements in our ability to understand the sensitivity of the measurements to boundary-layer CO (to cite a single example). This presentation leads naturally into a discussion of the future improvements of both of MOPITT instrument datasets and future instruments using similar techniques. MOPITT was provided to the Terra spacecraft by the Canadian Space Agency and was built by COMDEV of Cambridge, Ontario. Data processing is performed by the MOPITT team at the National Center for Atmospheric Research, Boulder, CO. Instrument control is by the team at the University of Toronto.

Pulp chamber temperature rise during curing of resin-based composites with different light-curing units.

PubMed

Durey, Kathryn; Santini, Ario; Miletic, Vesna

2008-01-01

The purpose of the present study was to measure the intrapulpal temperature rise occurring during polymerisation of different shades of resin-based composites (RBCs), and two light-emitting diode (LED) units. Seventy non-carious permanent molars, that had been extracted for orthodontic purposes and stored in 2% thymol for not more than four months, were selected. Patient age range was 11-18 years. Standard cavity preparation with standardised remaining dentine thickness and placement of thermocouples (TCs) was prepared using a novel split-tooth technique. Cavities were filled with one of two shades of RBC (A2 and C4, Filtek Z250, 3M ESPE, Seefeld, Germany), and cured with two LED high-intensity units (Elipar Freelight2, 3M ESPE, Seefeld, Germany; Bluephase, Ivoclar Vivadent, Schaan, Liechtenstein) and a conventional halogen light-curing unit (LCU) (Prismetics Lite 2, Dentsply, Weybridge, Surrey, UK) as a control. Pulp temperature rises during bonding [A2 results: H;2.67/0.48:E;5.24/1.32;B;5.99/1.61] were always greater than during RBC curing [A2 results: 2.44/0.63;E3.34/0.70;B3.38/0.60], and these were significant for both LED lights but not for the halogen control, irrespective of shade (Mann-Whitney test: 95% confidence limits). Temperature rises were at times in excess of the values normally quoted as causing irreversible pulp damage. Pulp temperature rises during bonding were higher with the LED lights than with the halogen control. There was no significant difference in temperature rise between the two LED lights when bonding but there was a significant difference between the two LED lights and the halogen control LCUs (Kruskal-Wallis Test: 95% confidence limits). The results support the view that there is a potential risk for heat-induced pulpal injury when light-curing RBCs. The risk is greater during bonding and with high energy, as compared to low-energy output systems. As the extent of tolerable thermal trauma by the pulp tissues is unknown, care and consideration should be given to the choice of LCU and the exposure time when curing RBCs, and especially during bonding.

Reflow dynamics of thin patterned viscous films

NASA Astrophysics Data System (ADS)

Leveder, T.; Landis, S.; Davoust, L.

2008-01-01

This letter presents a study of viscous smoothening dynamics of a nanopatterned thin film. Ultrathin film manufacturing processes appearing to be a key point of nanotechnology engineering and numerous studies have been recently led in order to exhibit driving parameters of this transient surface motion, focusing on time scale accuracy method. Based on nanomechanical analysis, this letter shows that controlled shape measurements provided much more detailed information about reflow mechanism. Control of reflow process of any complex surface shape, or measurement of material parameter as thin film viscosity, free surface energy, or even Hamaker constant are therefore possible.

Global systematic review of Indigenous community-led legal interventions to control alcohol

PubMed Central

Muhunthan, Janani; Angell, Blake; Hackett, Maree L; Wilson, Andrew; Latimer, Jane; Eades, Anne-Marie; Jan, Stephen

2017-01-01

Objectives The national and subnational governments of most developed nations have adopted cost-effective regulatory and legislative controls over alcohol supply and consumption with great success. However, there has been a lack of scrutiny of the effectiveness and appropriateness of these laws in shaping the health-related behaviours of Indigenous communities, who disproportionately experience alcohol-related harm. Further, such controls imposed unilaterally without Indigenous consultation have often been discriminatory and harmful in practice. Setting, participants and outcome measures In this systematic review of quantitative evaluations of Indigenous-led alcohol controls, we aim to investigate how regulatory responses have been developed and implemented by Indigenous communities worldwide, and evaluate their effectiveness in improving health and social outcomes. We included articles from electronic databases MEDLINE, EMBASE, CINAHL, PsycINFO and Web of Science from inception to December 2015. Results Our search yielded 1489 articles from which 18 met the inclusion criteria. Controls were implemented in rural and remote populations of high-income nations. Communities employed a range of regulatory options including alcohol rationing, prohibition of sale, importation or possession, restrictions on liquor sold, times of sale or mode of sale, Indigenous-controlled liquor licensing, sin tax and traditional forms of control. 11 studies reported interventions that were effective in reducing crime, injury deaths, injury, hospitalisations or lowering per capita consumption. In six studies interventions were found to be ineffective or harmful. The results were inconclusive in one. Conclusions Indigenous-led policies that are developed or implemented by communities can be effective in improving health and social outcomes. PMID:28348189

Evaluating Options for Measurement of Neighborhood Socioeconomic Context: Evidence from a Myocardial Infarction Case-Control Study

PubMed Central

Lovasi, Gina S.; Moudon, Anne Vernez; Smith, Nicholas L.; Lumley, Thomas; Larson, Eric B.; Sohn, Dong W; Siscovick, David S; Psaty, Bruce M

2008-01-01

We hypothesized that neighborhood socioeconomic context would be most stronly associated with risk of myocardial infarction (MI) for smaller “neighborhood” definitions. We used data on 487 non-fatal, incident MI cases and 1,873 controls from a case-control study in Washington State. Census data on income, home ownership, and education were used to estimate socioeconomic context across four neighborhood definitions: one-kilometer buffer, block group, census tract, and ZIP code. No neighborhood definition led to consistently stronger associations with MI. Although we confirmed the association between neighborhood socioeconomic measures and risk of MI, we did not find these associations sensitive to neighborhood definition. PMID:17950024

Psychological recovery after intensive care: Outcomes of a long-term quasi-experimental study of structured nurse-led follow-up.

PubMed

Jónasdóttir, Rannveig J; Jónsdóttir, Helga; Gudmundsdottir, Berglind; Sigurdsson, Gisli H

2018-02-01

To compare psychological recovery of patients receiving structured nurse-led follow-up and patients receiving usual care after intensive care discharge. Quasi-experimental study. Single centre, university hospital, mixed intensive care patient population. Symptoms of post-traumatic stress disorder, anxiety and depression measured three and four times over 12 months after intensive care discharge. Disturbing memories of the intensive care stay and psychological reactions (that one's life was in danger, threat to physical integrity, intense fear, helplessness, horror) three months after intensive care. A mixed effect model tested differences between the groups over time and regression model predicted post-traumatic stress at three months. The experimental group had significantly more symptoms of post-traumatic stress and anxiety than the control group over the 12 months. Patients from both groups had severe symptoms of post-traumatic stress. Patients with post-traumatic stress at three months had disturbing memories and psychological reactions. The structured nurse-led follow-up did not improve patients' measured outcomes of psychological recovery after intensive care. Patients with severe symptoms of post-traumatic stress are of concern. Emphasis needs to be placed on disturbing memories of the intensive care stay and psychological reactions when constructing intensive care nurse-led follow-up. Copyright © 2017 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Case study describes how the Byron G. Rogers Federal Building replaced existing T12 and T8 luminaires with LED dedicated troffers with advanced controls. Together these measures cut lighting energy use by nearly 60% in the 18-story, 791,000-square-foot facility. The new lighting control system provides automated dimming of lights down to 0% output when daylight provides adequate light levels. The project earned GSA an award for exemplary performance from the Interior Lighting Campaign in 2016.

The effect of ambient lighting on Laser Doppler Imaging of a standardized cutaneous injury model.

PubMed

Pham, Alan Chuong Q; Hei, Erik La; Harvey, John G; Holland, Andrew Ja

2017-01-01

The aim of this study was to investigate the potential confounding effects of four different types of ambient lighting on the results of Laser Doppler Imaging (LDI) of a standardized cutaneous injury model. After applying a mechanical stimulus to the anterior forearm of a healthy volunteer and inducing a wheal and arteriolar flare (the Triple response), we used a Laser Doppler Line Scanner (LDLS) to image the forearm under four different types of ambient lighting: light-emitting-diode (LED), compact fluorescent lighting (CFL), halogen, daylight, and darkness as a control. A spectrometer was used to measure the intensity of light energy at 785 nm, the wavelength used by the scanner for measurement under each type of ambient lighting. Neither the LED nor CFL bulbs emitted detectable light energy at a wavelength of 785 nm. The color-based representation of arbitrary perfusion unit (APU) values of the Triple response measured by the scanner was similar between darkness, LED, and CFL light. Daylight emitted 2 mW at 785 nm, with a slight variation tending more towards lower APU values compared to darkness. Halogen lighting emitted 6 mW of light energy at 785 nm rendering the color-based representation impossible to interpret. Halogen lighting and daylight have the potential to confound results of LDI of cutaneous injuries whereas LED and CFL lighting did not. Any potential sources of daylight should be reduced and halogen lighting completely covered or turned off prior to wound imaging.

Design and development of LED-based irregular leather area measuring machine

NASA Astrophysics Data System (ADS)

Adil, Rehan; Khan, Sarah Jamal

2012-01-01

Using optical sensor array, a precision motion control system in a conveyer follows the irregular shaped leather sheet to measure its surface area. In operation, irregular shaped leather sheet passes on conveyer belt and optical sensor array detects the leather sheet edge. In this way outside curvature of the leather sheet is detected and is then feed to the controller to measure its approximate area. Such system can measure irregular shapes, by neglecting rounded corners, ellipses etc. To minimize the error in calculating surface area of irregular curve to the above mentioned system, the motion control system only requires the footprint of the optical sensor to be small and the distance between the sensors is to be minimized. In the proposed technique surface area measurement of irregular shaped leather sheet is done by defining velocity and detecting position of the move. The motion controller takes the information and creates the necessary edge profile on point-to-point bases. As a result irregular shape of leather sheet is mapped and is then feed to the controller to calculate surface area.

A study of GaN-based LED structure etching using inductively coupled plasma

NASA Astrophysics Data System (ADS)

Wang, Pei; Cao, Bin; Gan, Zhiyin; Liu, Sheng

2011-02-01

GaN as a wide band gap semiconductor has been employed to fabricate optoelectronic devices such as light-emitting diodes (LEDs) and laser diodes (LDs). Recently several different dry etching techniques for GaN-based materials have been developed. ICP etching is attractive because of its superior plasma uniformity and strong controllability. Most previous reports emphasized on the ICP etching characteristics of single GaN film. In this study dry etching of GaN-based LED structure was performed by inductively coupled plasmas (ICP) etching with Cl2 as the base gas and BCl3 as the additive gas. The effects of the key process parameters such as etching gases flow rate, ICP power, RF power and chamber pressure on the etching properties of GaN-based LED structure including etching rate, selectivity, etched surface morphology and sidewall was investigated. Etch depths were measured using a depth profilometer and used to calculate the etch rates. The etch profiles were observed with a scanning electron microscope (SEM).

Effect of Palliative Care–Led Meetings for Families of Patients With Chronic Critical Illness

PubMed Central

Carson, Shannon S.; Cox, Christopher E.; Wallenstein, Sylvan; Hanson, Laura C.; Danis, Marion; Tulsky, James A; Chai, Emily; Nelson, Judith E.

2016-01-01

IMPORTANCE Family caregivers of patients with chronic critical illness experience significant psychological distress. OBJECTIVE To determine whether family informational and emotional support meetings led by palliative care clinicians improve family anxiety and depression. DESIGN, SETTING, AND PARTICIPANTS A multicenter randomized clinical trial conducted from October 2010 through November 2014 in 4 medical intensive care units (ICUs). Adult patients (aged ≥21 years) requiring 7 days of mechanical ventilation were randomized and their family surrogate decision makers were enrolled in the study. Observers were blinded to group allocation for the measurement of the primary outcomes. INTERVENTIONS At least 2 structured family meetings led by palliative care specialists and provision of an informational brochure (intervention) compared with provision of an informational brochure and routine family meetings conducted by ICU teams (control). There were 130 patients with 184 family surrogate decision makers in the intervention group and 126 patients with 181 family surrogate decision makers in the control group. MAIN OUTCOMES AND MEASURES The primary outcome was Hospital Anxiety and Depression Scale symptom score (HADS; score range, 0 [best] to 42 [worst]; minimal clinically important difference, 1.5) obtained during 3-month follow-up interviews with the surrogate decision makers. Secondary outcomes included posttraumatic stress disorder experienced by the family and measured by the Impact of Events Scale-Revised (IES-R; total score range, 0 [best] to 88 [worst]), discussion of patient preferences, hospital length of stay, and 90-day survival. RESULTS Among 365 family surrogate decision makers (mean age, 51 years; 71% female), 312 completed the study. At 3 months, there was no significant difference in anxiety and depression symptoms between surrogate decision makers in the intervention group and the control group (adjusted mean HADS score, 12.2 vs 11.4, respectively; between-group difference, 0.8 [95% CI, −0.9 to 2.6]; P = .34). Posttraumatic stress disorder symptoms were higher in the intervention group (adjusted mean IES-R score, 25.9) compared with the control group (adjusted mean IES-R score, 21.3) (between-group difference, 4.60 [95% CI, 0.01 to 9.10]; P = .0495). There was no difference between groups regarding the discussion of patient preferences (intervention, 75% control, 83% odds ratio, 0.63 [95% CI, 0.34 to 1.16; P = .14]). The median number of hospital days for patients in the intervention vs the control group (19 days vs 23 days, respectively; between-group difference, −4 days [95% CI, −6 to 3 days]; P = .51) and 90-day survival (hazard ratio,0.95 [95% CI, 0.65 to 1.38], P = .96) were not significantly different. CONCLUSIONS AND RELEVANCE Among families of patients with chronic critical illness, the use of palliative care–led informational and emotional support meetings compared with usual care did not reduce anxiety or depression symptoms and may have increased posttraumatic stress disorder symptoms. These findings do not support routine or mandatory palliative care–led discussion of goals of care for all families of patients with chronic critical illness. TRIAL REGISTRATION clinicaltrials.gov Identifier: NCT01230099 PMID:27380343

The Long-Term Effects of a Peer-Led Sex Education Programme (RIPPLE): A Cluster Randomised Trial in Schools in England

PubMed Central

Stephenson, Judith; Strange, Vicki; Allen, Elizabeth; Copas, Andrew; Johnson, Anne; Bonell, Chris; Babiker, Abdel; Oakley, Ann

2008-01-01

Background Peer-led sex education is widely believed to be an effective approach to reducing unsafe sex among young people, but reliable evidence from long-term studies is lacking. To assess the effectiveness of one form of school-based peer-led sex education in reducing unintended teenage pregnancy, we did a cluster (school) randomised trial with 7 y of follow-up. Methods and Findings Twenty-seven representative schools in England, with over 9,000 pupils aged 13–14 y at baseline, took part in the trial. Schools were randomised to either peer-led sex education (intervention) or to continue their usual teacher-led sex education (control). Peer educators, aged 16–17 y, were trained to deliver three 1-h classroom sessions of sex education to 13- to 14-y-old pupils from the same schools. The sessions used participatory learning methods designed to improve the younger pupils' skills in sexual communication and condom use and their knowledge about pregnancy, sexually transmitted infections (STIs), contraception, and local sexual health services. Main outcome measures were abortion and live births by age 20 y, determined by anonymised linkage of girls to routine (statutory) data. Assessment of these outcomes was blind to sex education allocation. The proportion of girls who had one or more abortions before age 20 y was the same in each arm (intervention, 5.0% [95% confidence interval (CI) 4.0%–6.3%]; control, 5.0% [95% CI 4.0%–6.4%]). The odds ratio (OR) adjusted for randomisation strata was 1.07 (95% CI 0.80–1.42, p = 0.64, intervention versus control). The proportion of girls with one or more live births by 20.5 y was 7.5% (95% CI 5.9%–9.6%) in the intervention arm and 10.6% (95% CI 6.8%–16.1%) in the control arm, adjusted OR 0.77 (0.51–1.15). Fewer girls in the peer-led arm self-reported a pregnancy by age 18 y (7.2% intervention versus 11.2% control, adjusted OR 0.62 [95% CI 0.42–0.91], weighted for non-response; response rate 61% intervention, 45% control). There were no significant differences for girls or boys in self-reported unprotected first sex, regretted or pressured sex, quality of current sexual relationship, diagnosed sexually transmitted diseases, or ability to identify local sexual health services. Conclusion Compared with conventional school sex education at age 13–14 y, this form of peer-led sex education was not associated with change in teenage abortions, but may have led to fewer teenage births and was popular with pupils. It merits consideration within broader teenage pregnancy prevention strategies. Trial registration: ISRCTN (ISRCTN94255362). PMID:19067478

Dimming-discrete-multi-tone (DMT) for simultaneous color control and high speed visible light communication.

PubMed

Sung, Jiun-Yu; Chow, Chi-Wai; Yeh, Chien-Hung

2014-04-07

Visible light communication (VLC) using LEDs has attracted significant attention recently for the future secure, license-free and electromagnetic-interference (EMI)-free optical wireless communication. Dimming technique in LED lamp is advantageous for energy efficiency. Color control can be performed in the red-green-blue (RGB) LEDs by using dimming technique. It is highly desirable to employ dimming technique to provide simultaneous color and dimming control and high speed VLC. Here, we proposed and demonstrated a LED dimming control using dimming-discrete-multi-tone (DMT) modulation. High speed DMT-based VLC with simultaneous color and dimming control is demonstrated for the first time to the best of our knowledge. Demonstration and analyses for several modulation conditions and transmission distances are performed, for instance, demonstrating the data rate of 103.5 Mb/s (using RGB LED) with fast Fourier transform (FFT) size of 512.

The effectiveness and safety of topical PhotoActif phosphatidylcholine-based anti-cellulite gel and LED (red and near-infrared) light on Grade II-III thigh cellulite: a randomized, double-blinded study.

PubMed

Sasaki, Gordon H; Oberg, Kerby; Tucker, Barbara; Gaston, Margaret

2007-06-01

Cellulite of the upper lateral and posterior thighs and lower buttocks represents a common, physiological and unwanted condition whose etiologies and effective management are subjects of continued debate. The purpose of this controlled, double-blinded study is to evaluate the efficacy and safety of a novel phosphatidylcholine-based, cosmeceutical anti-cellulite gel combined with a light-emitting diode (LED) array at the wavelengths of red (660 nm) and near-infrared (950 nm), designed to counter the possible mechanisms that purportedly accentuate the presence of thigh cellulite. Nine healthy female volunteers with Grade II-III thigh cellulite were randomly treated twice daily with an active gel on one thigh and a placebo gel on the control thigh for 3 months. Twice weekly, each thigh was exposed for a 15-minute treatment with LED light for a total of 24 treatments. At 0, 6, and 12 weeks of the study the following clinical determinants were obtained: standardized digital photography, height and weight measurements, standardized thigh circumference tape measurements, pinch testing, body mass index (kg/m2), body fat analysis (Futrex-5500/XL near-infrared analyzer), and digital high-resolution ultrasound imaging of the dermal-adiposal border. In selected patients, full-thickness biopsies of the placebo and active-treated sites were obtained. At 18 months, repeat standardized digital photography, height and weight measurements, and body mass index measurements were obtained. At the end of 3 months, eight of nine thighs treated with the phosphatidylcholine-based, anti-cellulite gel and LED treatments were downgraded to a lower cellulite grade by clinical examination, digital photography, and pinch test assessment. Digital ultrasound at the dermal-adiposal interface demonstrated not only a statistically significant reduction of immediate hypodermal depth, but also less echo-like intrusions into the dermal layer. Three of six biopsies from thighs treated for 3 months with the active gel and LED treatments demonstrated less intrusion of subcutaneous fat into the papillary and reticular dermis. In nine placebo and LED-treated thighs and one of the actively treated thighs, minimal clinical changes were observed or measured by the clinical determinants throughout the 3-month study. At the month-18 evaluation period for the eight responsive thighs, five thighs reverted back to their original cellulite grading, while three thighs continued to maintain their improved status. Patients experienced minimal and transient side effects that included puritus, erythema and swelling. The results of this small but well-documented, randomized, double-blinded study affirms that eight of nine thighs with Grade II-III cellulite responded positively to a novel, combined 3-month treatment program of a phosphatidylcholine-based, anti-cellulite gel and LED exposure, as determined by the clinical determinants obtained. Patients experienced minimal and transient side effects. At the month-18 evaluation period (15 months after treatment), five responsive thighs reverted back to their original cellulite grading, indicating a need for maintenance treatment. Future studies are needed to verify these tentative positive observations.

Getting the Balance Right: A randomised controlled trial of physiotherapy and Exercise Interventions for ambulatory people with multiple sclerosis

PubMed Central

Coote, Susan; Garrett, Maria; Hogan, Neasa; Larkin, Aidan; Saunders, Jean

2009-01-01

Background People with Multiple Sclerosis have a life long need for physiotherapy and exercise interventions due to the progressive nature of the disease and their greater risk of the complications of inactivity. The Multiple Sclerosis Society of Ireland run physiotherapy, yoga and exercise classes for their members, however there is little evidence to suggest which form of physical activity optimises outcome for people with the many and varied impairments associated with MS. Methods and design This is a multi-centre, single blind, block randomised, controlled trial. Participants will be recruited via the ten regional offices of MS Ireland. Telephone screening will establish eligibility and stratification according to the mobility section of the Guys Neurological Disability Scale. Once a block of people of the same strand in the same geographical region have given consent, participants will be randomised. Strand A will concern individuals with MS who walk independently or use one stick to walk outside. Participants will be randomised to yoga, physiotherapy led exercise class, fitness instructor led exercise class or to a control group who don't change their exercise habits. Strand B will concern individuals with MS who walk with bilateral support or a rollator, they may use a wheelchair for longer distance outdoors. Participants will be randomised to 1:1 Physiotherapist led intervention, group intervention led by Physiotherapist, group yoga intervention or a control group who don't change their exercise habits. Participants will be assessed by physiotherapist who is blind to the group allocation at week 1, week 12 (following 10 weeks intervention or control), and at 12 week follow up. The primary outcome measure for both strands is the Multiple Sclerosis Impact Scale. Secondary outcomes are Modified Fatigue Impact Scale, 6 Minute Walk test, and muscle strength measured with hand held dynamometry. Strand B will also use Berg Balance Test and the Modified Ashworth Scale. Confounding variables such as sensation, coordination, proprioception, range of motion and other impairments will be recorded at initial assessment. Discussion Data analysis will analyse change in each group, and the differences between groups. Sub group analysis may be performed if sufficient numbers are recruited. Trial registration ISRCTN77610415 PMID:19607666

Cluster randomised controlled trial of a peer-led lifestyle intervention program: study protocol for the Kerala diabetes prevention program.

PubMed

Sathish, Thirunavukkarasu; Williams, Emily D; Pasricha, Naanki; Absetz, Pilvikki; Lorgelly, Paula; Wolfe, Rory; Mathews, Elezebeth; Aziz, Zahra; Thankappan, Kavumpurathu Raman; Zimmet, Paul; Fisher, Edwin; Tapp, Robyn; Hollingsworth, Bruce; Mahal, Ajay; Shaw, Jonathan; Jolley, Damien; Daivadanam, Meena; Oldenburg, Brian

2013-11-04

India currently has more than 60 million people with Type 2 Diabetes Mellitus (T2DM) and this is predicted to increase by nearly two-thirds by 2030. While management of those with T2DM is important, preventing or delaying the onset of the disease, especially in those individuals at 'high risk' of developing T2DM, is urgently needed, particularly in resource-constrained settings. This paper describes the protocol for a cluster randomised controlled trial of a peer-led lifestyle intervention program to prevent diabetes in Kerala, India. A total of 60 polling booths are randomised to the intervention arm or control arm in rural Kerala, India. Data collection is conducted in two steps. Step 1 (Home screening): Participants aged 30-60 years are administered a screening questionnaire. Those having no history of T2DM and other chronic illnesses with an Indian Diabetes Risk Score value of ≥60 are invited to attend a mobile clinic (Step 2). At the mobile clinic, participants complete questionnaires, undergo physical measurements, and provide blood samples for biochemical analysis. Participants identified with T2DM at Step 2 are excluded from further study participation. Participants in the control arm are provided with a health education booklet containing information on symptoms, complications, and risk factors of T2DM with the recommended levels for primary prevention. Participants in the intervention arm receive: (1) eleven peer-led small group sessions to motivate, guide and support in planning, initiation and maintenance of lifestyle changes; (2) two diabetes prevention education sessions led by experts to raise awareness on T2DM risk factors, prevention and management; (3) a participant handbook containing information primarily on peer support and its role in assisting with lifestyle modification; (4) a participant workbook to guide self-monitoring of lifestyle behaviours, goal setting and goal review; (5) the health education booklet that is given to the control arm. Follow-up assessments are conducted at 12 and 24 months. The primary outcome is incidence of T2DM. Secondary outcomes include behavioural, psychosocial, clinical, and biochemical measures. An economic evaluation is planned. Results from this trial will contribute to improved policy and practice regarding lifestyle intervention programs to prevent diabetes in India and other resource-constrained settings. Australia and New Zealand Clinical Trials Registry: ACTRN12611000262909.

A randomized controlled trial undertaken to test a nurse-led weight management and exercise intervention designed for people with serious mental illness who take second generation antipsychotics.

PubMed

Usher, Kim; Park, Tanya; Foster, Kim; Buettner, Petra

2013-07-01

To test the effect of a nurse-led intervention on weight gain in people with serious mental illness prescribed and taking second generation antipsychotic medication. Weight gain and obesity has reached epidemic proportions in the general population with the prevalence of Metabolic Syndrome reaching 20-25% of the global population. People with serious mental illness are at even higher risk, particularly those taking second generation antipsychotic medication. An experimental randomized controlled trial was undertaken. The control group received a 12-week healthy lifestyle booklet. In addition to the booklet, the intervention group received weekly nutrition and exercise education, exercise sessions, and nurse support. Participants (n = 101) were assessed at baseline and 12 weeks. Data were collected between March 2008-December 2010. Seven outcome measures were used: body measurements included girth (cm), weight (kg), height (cm), and body mass index (kg/m(2) ); questionnaires included the medication compliance questionnaire, the Drug Attitude Inventory, the Liverpool University Neuroleptic Side Effect Rating Scale, and the Medical Outcomes Study Short Form 36. Differences in primary outcome measures between baseline and 12 weeks follow-up were compared between intervention and control groups using standard bi-variate statistical tests. The study was conducted between 2008-2010. The analysis of outcome measures for the control group (n = 50) and intervention group (n = 51) was not statistically significant. There was a mean weight change of -0·74 kg at 12 weeks for the intervention group (n = 51), while the control group (n = 50) had a mean weight change of -0·17 kg at 12 weeks. The results were not statistically significant. © 2012 Blackwell Publishing Ltd.

Systematic Review of Interventions to Prevent Spread of Sexually Transmitted Infections, Including HIV, Among Young People in Europe

PubMed Central

Lazarus, Jeffrey V.; Sihvonen-Riemenschneider, Henna; Laukamm-Josten, Ulrich; Wong, Fiona; Liljestrand, Jerker

2010-01-01

Aim To examine the effectiveness of interventions seeking to prevent the spread of sexually transmitted infections (STI), including HIV, among young people in the European Union. Methods For this systematic review, we examined interventions that aimed at STI risk reduction and health promotion conducted in schools, clinics, and in the community for reported effectiveness (in changing sexual behavior and/or knowledge) between 1995 and 2005. We also reviewed study design and intervention methodology to discover how these factors affected the results, and we compiled a list of characteristics associated with successful and unsuccessful programs. Studies were eligible if they employed a randomized control design or intervention-only design that examined change over time and measured behavioral, biologic, or certain psychosocial outcomes. Results Of the 19 studies that satisfied our review criteria, 11 reported improvements in the sexual health knowledge and/or attitudes of young people. Ten of the 19 studies aimed to change sexual risk behavior and 3 studies reported a significant reduction in a specific aspect of sexual risk behavior. Two of the interventions that led to behavioral change were peer-led and the other was teacher-led. Only 1 of the 8 randomized controlled trials reported any statistically significant change in sexual behavior, and then only for young females. Conclusion The young people studied were more accepting of peer-led than teacher-led interventions. Peer-led interventions were also more successful in improving sexual knowledge, though there was no clear difference in their effectiveness in changing behavior. The improvement in sexual health knowledge does not necessarily lead to behavioral change. While knowledge may help improve health-seeking behavior, additional interventions are needed to reduce STIs among young people. PMID:20162748

Nighttime Supplemental LED Inter-lighting Improves Growth and Yield of Single-Truss Tomatoes by Enhancing Photosynthesis in Both Winter and Summer.

PubMed

Tewolde, Fasil T; Lu, Na; Shiina, Kouta; Maruo, Toru; Takagaki, Michiko; Kozai, Toyoki; Yamori, Wataru

2016-01-01

Greenhouses with sophisticated environmental control systems, or so-called plant factories with solar light, enable growers to achieve high yields of produce with desirable qualities. In a greenhouse crop with high planting density, low photosynthetic photon flux density (PPFD) at the lower leaves tends to limit plant growth, especially in the winter when the solar altitude and PPFD at the canopy are low and day length is shorter than in summer. Therefore, providing supplemental lighting to the lower canopy can increase year-round productivity. However, supplemental lighting can be expensive. In some places, the cost of electricity is lower at night, but the effect of using supplemental light at night has not yet been examined. In this study, we examined the effects of supplemental LED inter-lighting (LED inter-lighting hereafter) during the daytime or nighttime on photosynthesis, growth, and yield of single-truss tomato plants both in winter and summer. We used LED inter-lighting modules with combined red and blue light to illuminate lower leaves right after the first anthesis. The PPFD of this light was 165 μmol m(-2) s(-1) measured at 10 cm from the LED module. LED inter-lighting was provided from 4:00 am to 4:00 pm for the daytime treatments and from 10:00 pm to 10:00 am for the nighttime treatments. Plants exposed only to solar light were used as controls. Daytime LED inter-lighting increased the photosynthetic capacity of middle and lower canopy leaves, which significantly increased yield by 27% in winter; however, photosynthetic capacity and yield were not significantly increased during summer. Nighttime LED inter-lighting increased photosynthetic capacity in both winter and summer, and yield increased by 24% in winter and 12% in summer. In addition, nighttime LED inter-lighting in winter significantly increased the total soluble solids and ascorbic acid content of the tomato fruits, by 20 and 25%, respectively. Use of nighttime LED inter-lighting was also more cost-effective than daytime inter-lighting. Thus, nighttime LED inter-lighting can effectively improve tomato plant growth and yield with lower energy cost compared with daytime both in summer and winter.

Nighttime Supplemental LED Inter-lighting Improves Growth and Yield of Single-Truss Tomatoes by Enhancing Photosynthesis in Both Winter and Summer

PubMed Central

Tewolde, Fasil T.; Lu, Na; Shiina, Kouta; Maruo, Toru; Takagaki, Michiko; Kozai, Toyoki; Yamori, Wataru

2016-01-01

Greenhouses with sophisticated environmental control systems, or so-called plant factories with solar light, enable growers to achieve high yields of produce with desirable qualities. In a greenhouse crop with high planting density, low photosynthetic photon flux density (PPFD) at the lower leaves tends to limit plant growth, especially in the winter when the solar altitude and PPFD at the canopy are low and day length is shorter than in summer. Therefore, providing supplemental lighting to the lower canopy can increase year-round productivity. However, supplemental lighting can be expensive. In some places, the cost of electricity is lower at night, but the effect of using supplemental light at night has not yet been examined. In this study, we examined the effects of supplemental LED inter-lighting (LED inter-lighting hereafter) during the daytime or nighttime on photosynthesis, growth, and yield of single-truss tomato plants both in winter and summer. We used LED inter-lighting modules with combined red and blue light to illuminate lower leaves right after the first anthesis. The PPFD of this light was 165 μmol m-2 s-1 measured at 10 cm from the LED module. LED inter-lighting was provided from 4:00 am to 4:00 pm for the daytime treatments and from 10:00 pm to 10:00 am for the nighttime treatments. Plants exposed only to solar light were used as controls. Daytime LED inter-lighting increased the photosynthetic capacity of middle and lower canopy leaves, which significantly increased yield by 27% in winter; however, photosynthetic capacity and yield were not significantly increased during summer. Nighttime LED inter-lighting increased photosynthetic capacity in both winter and summer, and yield increased by 24% in winter and 12% in summer. In addition, nighttime LED inter-lighting in winter significantly increased the total soluble solids and ascorbic acid content of the tomato fruits, by 20 and 25%, respectively. Use of nighttime LED inter-lighting was also more cost-effective than daytime inter-lighting. Thus, nighttime LED inter-lighting can effectively improve tomato plant growth and yield with lower energy cost compared with daytime both in summer and winter. PMID:27092163

A Programmable System for Motion Control

NASA Technical Reports Server (NTRS)

Nowlin, Brent C.

2003-01-01

The need for improved flow measurements in the flow path of aeronautics testing facilities has led the NASA Glenn Research Center to develop a new motion control system. The new system is programmable, offering a flexibility unheard of in previous systems. The motion control system is PLC-based, which leads to highly accurate positioning ability, as well as reliability. The user interface is a software-based HMI package, which also adds flexibility to the overall system. The system also has the ability to create and execute motion profiles. This paper discusses the system's operation, control implementation, and experiences.

A new approach to preparation of standard LEDs for luminous intensity and flux measurement of LEDs

NASA Astrophysics Data System (ADS)

Park, Seung-Nam; Park, Seongchong; Lee, Dong-Hoon

2006-09-01

This work presents an alternative approach for preparing photometric standard LEDs, which is based on a novel functional seasoning method. The main idea of our seasoning method is simultaneously monitoring the light output and the junction voltage to obtain quantitative information on the temperature dependence and the aging effect of the LED emission. We suggested a general model describing the seasoning process by taking junction temperature variation and aging effect into account and implemented a fully automated seasoning facility, which is capable of seasoning 12 LEDs at the same time. By independent measurements of the temperature dependence, we confirmed the discrepancy of the theoretical model to be less than 0.5 % and evaluate the uncertainty contribution of the functional seasoning to be less than 0.5 % for all the seasoned samples. To demonstrate assigning the reference value to a standard LED, the CIE averaged LED intensity (ALI) of the seasoned LEDs was measured with a spectroradiometer-based instrument and the measurement uncertainty was analyzed. The expanded uncertainty of the standard LED prepared by the new approach amounts to be 4 % ~ 5 % (k=2) depending on color without correction of spectral stray light in the spectroradiometer.

Surface developmental dyslexia is as prevalent as phonological dyslexia when appropriate control groups are employed.

PubMed

Wybrow, Dean P; Hanley, J Richard

2015-01-01

Previous investigations of the incidence of developmental surface and phonological dyslexia using reading-age-matched control groups have identified many more phonological dyslexics (poor nonword reading relative to irregular-word reading) than surface dyslexics (poor irregular-word reading relative to nonword reading). However, because the measures that have been used to estimate reading age include irregular-word reading ability, they appear inappropriate for assessing the incidence of surface dyslexia. The current study used a novel method for generating control groups whose reading ability was matched to that of the dyslexic sample. The incidence of surface dyslexia was assessed by comparing dyslexic performance with that of a control group who were matched with the dyslexics on a test of nonword reading. The incidence of phonological dyslexia was assessed with reference to a control group who were matched with the dyslexics at irregular-word reading. These control groups led to the identification of an approximately equal number of children with surface and phonological dyslexia. It appeared that selecting control participants who were matched with dyslexics for reading age led to the recruitment of individuals with relatively high nonword reading scores relative to their irregular-word reading scores compared with other types of control group. The theoretical implications of these findings are discussed.

Are self-directed parenting interventions sufficient for externalising behaviour problems in childhood? A systematic review and meta-analysis.

PubMed

Tarver, Joanne; Daley, David; Lockwood, Joanna; Sayal, Kapil

2014-12-01

Externalising behaviour in childhood is a prevalent problem in the field of child and adolescent mental health. Parenting interventions are widely accepted as efficacious treatment options for reducing externalising behaviour, yet practical and psychological barriers limit their accessibility. This review aims to establish the evidence base of self-directed (SD) parenting interventions for externalising behaviour problems. Electronic searches of PubMed, Web of Knowledge, Psychinfo, Embase and CENTRAL databases and manual searches of reference lists of relevant reviews identified randomised controlled trials and cluster randomised controlled trials examining the efficacy of SD interventions compared to no-treatment or active control groups. A random-effect meta-analysis estimated pooled standard mean difference (SMD) for SD interventions on measures of externalising child behaviour. Secondary analyses examined their effect on measures of parenting behaviour, parental stress and mood and parenting efficacy. Eleven eligible trials were included in the analyses. SD interventions had a large effect on parent report of externalising child behaviour (SMD = 1.01, 95 % CI: 0.77-1.24); although this effect was not upheld by analyses of observed child behaviour. Secondary analyses revealed effects of small to moderate magnitude on measures of parenting behaviour, parental mood and stress and parenting efficacy. An analysis comparing SD interventions with therapist-led parenting interventions revealed no significant difference on parent-reported measures of externalising child behaviour. SD interventions are associated with improvements in parental perception of externalising child behaviour and parental behaviour and well-being. Future research should further investigate the relative efficacy and cost-effectiveness of SD interventions compared to therapist-led interventions.

The effects of actomyosin disruptors on the mechanical integrity of the avian crystalline lens

PubMed Central

Won, Gah-Jone; Fudge, Douglas S.

2015-01-01

Purpose: Actin and myosin within the crystalline lens maintain the structural integrity of lens fiber cells and form a hexagonal lattice cradling the posterior surface of the lens. The actomyosin network was pharmacologically disrupted to examine the effects on lenticular biomechanics and optical quality. Methods: One lens of 7-day-old White Leghorn chickens was treated with 10 µM of a disruptor and the other with 0.01% dimethyl sulfoxide (vehicle). Actin, myosin, and myosin light chain kinase (MLCK) disruptors were used. The stiffness and the optical quality of the control and treated lenses were measured. Western blotting and confocal imaging were used to confirm that treatment led to a disruption of the actomyosin network. The times for the lenses to recover stiffness to match the control values were also measured. Results: Disruptor-treated lenses were significantly less stiff than their controls (p≤0.0274 for all disruptors). The disruptors led to changes in the relative protein amounts as well as the distributions of proteins within the lattice. However, the disruptors did not affect the clarity of the lenses (p≥0.4696 for all disruptors), nor did they affect spherical aberration (p = 0.02245). The effects of all three disruptors were reversible, with lenses recovering from treatment with actin, myosin, and MLCK disruptors after 4 h, 1 h, and 8 min, respectively. Conclusions: Cytoskeletal protein disruptors led to a decreased stiffness of the lens, and the effects were reversible. Optical quality was mostly unaffected, but the long-term consequences remain unclear. Our results raise the possibility that the mechanical properties of the avian lens may be actively regulated in vivo via adjustments to the actomyosin lattice. PMID:25684975

The effects of actomyosin disruptors on the mechanical integrity of the avian crystalline lens.

PubMed

Won, Gah-Jone; Fudge, Douglas S; Choh, Vivian

2015-01-01

Actin and myosin within the crystalline lens maintain the structural integrity of lens fiber cells and form a hexagonal lattice cradling the posterior surface of the lens. The actomyosin network was pharmacologically disrupted to examine the effects on lenticular biomechanics and optical quality. One lens of 7-day-old White Leghorn chickens was treated with 10 µM of a disruptor and the other with 0.01% dimethyl sulfoxide (vehicle). Actin, myosin, and myosin light chain kinase (MLCK) disruptors were used. The stiffness and the optical quality of the control and treated lenses were measured. Western blotting and confocal imaging were used to confirm that treatment led to a disruption of the actomyosin network. The times for the lenses to recover stiffness to match the control values were also measured. Disruptor-treated lenses were significantly less stiff than their controls (p≤0.0274 for all disruptors). The disruptors led to changes in the relative protein amounts as well as the distributions of proteins within the lattice. However, the disruptors did not affect the clarity of the lenses (p≥0.4696 for all disruptors), nor did they affect spherical aberration (p = 0.02245). The effects of all three disruptors were reversible, with lenses recovering from treatment with actin, myosin, and MLCK disruptors after 4 h, 1 h, and 8 min, respectively. Cytoskeletal protein disruptors led to a decreased stiffness of the lens, and the effects were reversible. Optical quality was mostly unaffected, but the long-term consequences remain unclear. Our results raise the possibility that the mechanical properties of the avian lens may be actively regulated in vivo via adjustments to the actomyosin lattice.

Adaptation to nonlinear frequency compression in normal-hearing adults: a comparison of training approaches.

PubMed

Dickinson, Ann-Marie; Baker, Richard; Siciliano, Catherine; Munro, Kevin J

2014-10-01

To identify which training approach, if any, is most effective for improving perception of frequency-compressed speech. A between-subject design using repeated measures. Forty young adults with normal hearing were randomly allocated to one of four groups: a training group (sentence or consonant) or a control group (passive exposure or test-only). Test and training material differed in terms of material and speaker. On average, sentence training and passive exposure led to significantly improved sentence recognition (11.0% and 11.7%, respectively) compared with the consonant training group (2.5%) and test-only group (0.4%), whilst, consonant training led to significantly improved consonant recognition (8.8%) compared with the sentence training group (1.9%), passive exposure group (2.8%), and test-only group (0.8%). Sentence training led to improved sentence recognition, whilst consonant training led to improved consonant recognition. This suggests learning transferred between speakers and material but not stimuli. Passive exposure to sentence material led to an improvement in sentence recognition that was equivalent to gains from active training. This suggests that it may be possible to adapt passively to frequency-compressed speech.

Peer-led versus teacher-led AIDS education for female high-school students in Yazd, Islamic Republic of Iran.

PubMed

Baghianimoghadam, M H; Forghani, H; Zolghadr, R; Rahaei, Z; Khani, P

2012-04-01

Peer-led programmes on AIDS prevention have shown a good level of effectiveness when tested among high-risk populations. This study compared peer-led and teacher-led methods of education about HIV/AIDS among female high-school students in Yazd city, Islamic Republic of Iran. In 2009 students in 3 high schools were trained by their classmates (peer-led), by the research team (teacher-led) or had no education (controls); 180 students completed a specially designed questionnaire based on the health belief model, before and after the intervention. Post-intervention mean knowledge scores increased 2-fold in the peer-led group, and this was significantly higher than the increase in the teacher-led group scores (1.5-fold). Control group scores were unchanged. In the peer-led programme all of the components of the model were significantly improved whereas in the teacher-led programme, only perceived severity and perceived barriers scored significantly higher after the intervention.

The effect of ambient lighting on Laser Doppler Imaging of a standardized cutaneous injury model

PubMed Central

Pham, Alan Chuong Q; Hei, Erik La; Harvey, John G; Holland, Andrew JA

2017-01-01

Objective: The aim of this study was to investigate the potential confounding effects of four different types of ambient lighting on the results of Laser Doppler Imaging (LDI) of a standardized cutaneous injury model. Methods: After applying a mechanical stimulus to the anterior forearm of a healthy volunteer and inducing a wheal and arteriolar flare (the Triple response), we used a Laser Doppler Line Scanner (LDLS) to image the forearm under four different types of ambient lighting: light-emitting-diode (LED), compact fluorescent lighting (CFL), halogen, daylight, and darkness as a control. A spectrometer was used to measure the intensity of light energy at 785 nm, the wavelength used by the scanner for measurement under each type of ambient lighting. Results: Neither the LED nor CFL bulbs emitted detectable light energy at a wavelength of 785 nm. The color-based representation of arbitrary perfusion unit (APU) values of the Triple response measured by the scanner was similar between darkness, LED, and CFL light. Daylight emitted 2 mW at 785 nm, with a slight variation tending more towards lower APU values compared to darkness. Halogen lighting emitted 6 mW of light energy at 785 nm rendering the color-based representation impossible to interpret. Conclusions: Halogen lighting and daylight have the potential to confound results of LDI of cutaneous injuries whereas LED and CFL lighting did not. Any potential sources of daylight should be reduced and halogen lighting completely covered or turned off prior to wound imaging. PMID:29348978

Lamp of adjustable spectrum for photographic usage

NASA Astrophysics Data System (ADS)

Mazikowski, Adam; Feldzensztajn, Mateusz

2017-08-01

Photography is a unique rapidly growing interdisciplinary field encompassing aspects of science, art and technology. Expectations of photographers are steadily increasing with the development of technology. One of the areas playing a crucial role in photography is lighting. Consequently, several types of light sources for photographic use have been developed. The ongoing research in this field concentrates on lamps with tunable CCT (Correlated Color Temperature). In this paper, we present a lamp, which emission spectrum can be tailored without affecting the output luminous ux. Intended for photographic uses, the lamp is based on an integrating sphere and a selection of LEDs. As the LED drivers, DC-DC converters controlled by a Raspberry PI were applied. Design process, including the selection of LED wavelengths, is presented. Output characteristics of the lamp were measured using the setup containing the spectrometer. The results of these experiments show good agreement with the spectrum set on the microcomputer.

Precise Temperature Mapping of GaN-Based LEDs by Quantitative Infrared Micro-Thermography

PubMed Central

Chang, Ki Soo; Yang, Sun Choel; Kim, Jae-Young; Kook, Myung Ho; Ryu, Seon Young; Choi, Hae Young; Kim, Geon Hee

2012-01-01

A method of measuring the precise temperature distribution of GaN-based light-emitting diodes (LEDs) by quantitative infrared micro-thermography is reported. To reduce the calibration error, the same measuring conditions were used for both calibration and thermal imaging; calibration was conducted on a highly emissive black-painted area on a dummy sapphire wafer loaded near the LED wafer on a thermoelectric cooler mount. We used infrared thermal radiation images of the black-painted area on the dummy wafer and an unbiased LED wafer at two different temperatures to determine the factors that degrade the accuracy of temperature measurement, i.e., the non-uniform response of the instrument, superimposed offset radiation, reflected radiation, and emissivity map of the LED surface. By correcting these factors from the measured infrared thermal radiation images of biased LEDs, we determined a precise absolute temperature image. Consequently, we could observe from where the local self-heat emerges and how it distributes on the emitting area of the LEDs. The experimental results demonstrated that highly localized self-heating and a remarkable temperature gradient, which are detrimental to LED performance and reliability, arise near the p-contact edge of the LED surface at high injection levels owing to the current crowding effect. PMID:22666050

LED Context Lighting System in Residential Areas

PubMed Central

Im, Kyoung-Mi

2014-01-01

As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context. PMID:25101325

Positive affect and physical activity: Testing effects on goal setting, activation, prioritisation, and attainment.

PubMed

Cameron, David S; Bertenshaw, Emma J; Sheeran, Paschal

2018-02-01

The present research tested whether incidental positive affect promotes pursuit of physical activity goals. Four key features of goal pursuit were examined - setting physical activity goals (Study 1), goal activation (Study 2), and goal prioritization and goal attainment (Study 3). Participants (N s = 80, 81, and 59, in Studies 1-3, respectively) were randomized to positive affect (joy, hope) or neutral affect (control) conditions in each study. Questionnaire measures of goal level, goal commitment, and means selection (Study 1); a lexical decision task indexed goal activation (Study 2), a choice task captured goal prioritization and MET minutes quantified goal attainment (Study 3). Study 1 showed that positive affect led to a greater number of intended physical activities, and that joy engendered greater willingness to try activities. In Study 2, a positive affect induction led to heightened activation of the physical activity goal compared to the control condition. The joy induction in Study 3 led to greater physical activity, and a trend towards greater goal prioritization. These findings suggest that positive affect enhances the pursuit of physical activity goals. Implications for health behavior theories and interventions are outlined.

830 nm light-emitting diode (led) phototherapy significantly reduced return-to-play in injured university athletes: a pilot study.

PubMed

Foley, John; Vasily, David B; Bradle, Jeanna; Rudio, Catharine; Calderhead, R Glen

2016-03-31

For any committed athlete, getting back to conditioning and participation post-injury (return to play [RTP]) needs to be as swift as possible. The effects of near-infrared light-emitting diode (LED) therapy on pain control, blood flow enhancement and relaxation of muscle spasm (all aspects in the treatment of musculoskeletal injury) have attracted attention. The present pilot study was undertaken to assess the role of 830 nm LED phototherapy in safely accelerating RTP in injured university athletes. Over a 15-month period, a total of 395 injuries including sprains, strains, ligament damage, tendonitis and contusions were treated with 1,669 sessions of 830 nm LED phototherapy (mean of 4.3 treatments per injury, range 2 - 6). Efficacy was measured with pain attenuation on a visual analog scale (VAS) and the RTP period compared with historically-based anticipated RTP with conventional therapeutic intervention. A full set of treatment sessions and follow-up data was able to be recorded in 65 informed and consenting subjects who achieved pain relief on the VAS of up to 6 points in from 2-6 sessions. The average LED-mediated RTP in the 65 subjects was significantly shorter at 9.6 days, compared with the mean anticipated RTP of 19.23 days (p = 0.0066, paired two-tailed Student's t-test). A subjective satisfaction survey was carried out among the 112 students with injuries incurred from January to May, 2015. Eighty-eight (78.5%) were either very satisfied or satisfied, and only 8 (7.2%) were dissatisfied. For any motivated athlete, RTP may be the most important factor postinjury based on the resolution of pain and inflammation and repair to tissue trauma. 830 nm LED phototherapy significantly and safely reduced the RTP in dedicated university athletes over a wide range of injuries with no adverse events. One limitation of the present study was the subjective nature of the assessments, and the lack of any control groups. However, further controlled studies are warranted to enable confirmation and generalization of the very good results in the present study.

830 nm light-emitting diode (led) phototherapy significantly reduced return-to-play in injured university athletes: a pilot study

PubMed Central

Vasily, David B; Bradle, Jeanna; Rudio, Catharine; Calderhead, R Glen

2016-01-01

Background and Aims: For any committed athlete, getting back to conditioning and participation post-injury (return to play [RTP]) needs to be as swift as possible. The effects of near-infrared light-emitting diode (LED) therapy on pain control, blood flow enhancement and relaxation of muscle spasm (all aspects in the treatment of musculoskeletal injury) have attracted attention. The present pilot study was undertaken to assess the role of 830 nm LED phototherapy in safely accelerating RTP in injured university athletes. Subjects and Methods: Over a 15-month period, a total of 395 injuries including sprains, strains, ligament damage, tendonitis and contusions were treated with 1,669 sessions of 830 nm LED phototherapy (mean of 4.3 treatments per injury, range 2 – 6). Efficacy was measured with pain attenuation on a visual analog scale (VAS) and the RTP period compared with historically-based anticipated RTP with conventional therapeutic intervention. Results: A full set of treatment sessions and follow-up data was able to be recorded in 65 informed and consenting subjects who achieved pain relief on the VAS of up to 6 points in from 2–6 sessions. The average LED-mediated RTP in the 65 subjects was significantly shorter at 9.6 days, compared with the mean anticipated RTP of 19.23 days (p = 0.0066, paired two-tailed Student's t-test). A subjective satisfaction survey was carried out among the 112 students with injuries incurred from January to May, 2015. Eighty-eight (78.5%) were either very satisfied or satisfied, and only 8 (7.2%) were dissatisfied. Conclusions: For any motivated athlete, RTP may be the most important factor postinjury based on the resolution of pain and inflammation and repair to tissue trauma. 830 nm LED phototherapy significantly and safely reduced the RTP in dedicated university athletes over a wide range of injuries with no adverse events. One limitation of the present study was the subjective nature of the assessments, and the lack of any control groups. However, further controlled studies are warranted to enable confirmation and generalization of the very good results in the present study. PMID:27141153

Working memory load and distraction: dissociable effects of visual maintenance and cognitive control.

PubMed

Konstantinou, Nikos; Beal, Eleanor; King, Jean-Remi; Lavie, Nilli

2014-10-01

We establish a new dissociation between the roles of working memory (WM) cognitive control and visual maintenance in selective attention as measured by the efficiency of distractor rejection. The extent to which focused selective attention can prevent distraction has been shown to critically depend on the level and type of load involved in the task. High perceptual load that consumes perceptual capacity leads to reduced distractor processing, whereas high WM load that reduces WM ability to exert priority-based executive cognitive control over the task results in increased distractor processing (e.g., Lavie, Trends in Cognitive Sciences, 9(2), 75-82, 2005). WM also serves to maintain task-relevant visual representations, and such visual maintenance is known to recruit the same sensory cortices as those involved in perception (e.g., Pasternak & Greenlee, Nature Reviews Neuroscience, 6(2), 97-107, 2005). These findings led us to hypothesize that loading WM with visual maintenance would reduce visual capacity involved in perception, thus resulting in reduced distractor processing-similar to perceptual load and opposite to WM cognitive control load. Distractor processing was assessed in a response competition task, presented during the memory interval (or during encoding; Experiment 1a) of a WM task. Loading visual maintenance or encoding by increased set size for a memory sample of shapes, colors, and locations led to reduced distractor response competition effects. In contrast, loading WM cognitive control with verbal rehearsal of a random letter set led to increased distractor effects. These findings confirm load theory predictions and provide a novel functional distinction between the roles of WM maintenance and cognitive control in selective attention.

Apparatus and method for measuring single cell and sub-cellular photosynthetic efficiency

DOEpatents

Davis, Ryan Wesley; Singh, Seema; Wu, Huawen

2013-07-09

Devices for measuring single cell changes in photosynthetic efficiency in algal aquaculture are disclosed that include a combination of modulated LED trans-illumination of different intensities with synchronized through objective laser illumination and confocal detection. Synchronization and intensity modulation of a dual illumination scheme were provided using a custom microcontroller for a laser beam block and constant current LED driver. Therefore, single whole cell photosynthetic efficiency, and subcellular (diffraction limited) photosynthetic efficiency measurement modes are permitted. Wide field rapid light scanning actinic illumination is provided for both by an intensity modulated 470 nm LED. For the whole cell photosynthetic efficiency measurement, the same LED provides saturating pulses for generating photosynthetic induction curves. For the subcellular photosynthetic efficiency measurement, a switched through objective 488 nm laser provides saturating pulses for generating photosynthetic induction curves. A second near IR LED is employed to generate dark adapted states in the system under study.

Smart LED lighting for major reductions in power and energy use for plant lighting in space

NASA Astrophysics Data System (ADS)

Poulet, Lucie

Launching or resupplying food, oxygen, and water into space for long-duration, crewed missions to distant destinations, such as Mars, is currently impossible. Bioregenerative life-support systems under development worldwide involving photoautotrophic organisms offer a solution to the food dilemma. However, using traditional Earth-based lighting methods, growth of food crops consumes copious energy, and since sunlight will not always be available at different space destinations, efficient electric lighting solutions are badly needed to reduce the Equivalent System Mass (ESM) of life-support infrastructure to be launched and transported to future space destinations with sustainable human habitats. The scope of the present study was to demonstrate that using LEDs coupled to plant detection, and optimizing spectral and irradiance parameters of LED light, the model crop lettuce (Lactuca sativa L. cv. Waldmann's Green) can be grown with significantly lower electrical energy for plant lighting than using traditional lighting sources. Initial experiments aimed at adapting and troubleshooting a first-generation "smart" plant-detection system coupled to LED arrays resulted in optimizing the detection process for plant position and size to the limits of its current design. Lettuce crops were grown hydroponically in a growth chamber, where temperature, relative humidity, and CO2 level are controlled. Optimal irradiance and red/blue ratio of LED lighting were determined for plant growth during both lag and exponential phases of crop growth. Under optimizing conditions, the efficiency of the automatic detection system was integrated with LED switching and compared to a system in which all LEDs were energized throughout a crop-production cycle. At the end of each cropping cycle, plant fresh and dry weights and leaf area were measured and correlated with the amount of electrical energy (kWh) consumed. Preliminary results indicated that lettuce plants grown under optimizing conditions with red and blue LED lighting required 12 times less energy than with a traditional high-intensity discharge lighting system. This study paves the way for refinement of the smart lighting system and further, major reductions in ESM for space life-support systems and for ground-based controlled-environment agriculture. Project supported by NASA grant number NNX09AL99G.

Noncontact conductivity and dielectric measurement for high throughput roll-to-roll nanomanufacturing

NASA Astrophysics Data System (ADS)

Orloff, Nathan D.; Long, Christian J.; Obrzut, Jan; Maillaud, Laurent; Mirri, Francesca; Kole, Thomas P.; McMichael, Robert D.; Pasquali, Matteo; Stranick, Stephan J.; Alexander Liddle, J.

2015-11-01

Advances in roll-to-roll processing of graphene and carbon nanotubes have at last led to the continuous production of high-quality coatings and filaments, ushering in a wave of applications for flexible and wearable electronics, woven fabrics, and wires. These applications often require specific electrical properties, and hence precise control over material micro- and nanostructure. While such control can be achieved, in principle, by closed-loop processing methods, there are relatively few noncontact and nondestructive options for quantifying the electrical properties of materials on a moving web at the speed required in modern nanomanufacturing. Here, we demonstrate a noncontact microwave method for measuring the dielectric constant and conductivity (or geometry for samples of known dielectric properties) of materials in a millisecond. Such measurement times are compatible with current and future industrial needs, enabling real-time materials characterization and in-line control of processing variables without disrupting production.

Noncontact conductivity and dielectric measurement for high throughput roll-to-roll nanomanufacturing

PubMed Central

Orloff, Nathan D.; Long, Christian J.; Obrzut, Jan; Maillaud, Laurent; Mirri, Francesca; Kole, Thomas P.; McMichael, Robert D.; Pasquali, Matteo; Stranick, Stephan J.; Alexander Liddle, J.

2015-01-01

Advances in roll-to-roll processing of graphene and carbon nanotubes have at last led to the continuous production of high-quality coatings and filaments, ushering in a wave of applications for flexible and wearable electronics, woven fabrics, and wires. These applications often require specific electrical properties, and hence precise control over material micro- and nanostructure. While such control can be achieved, in principle, by closed-loop processing methods, there are relatively few noncontact and nondestructive options for quantifying the electrical properties of materials on a moving web at the speed required in modern nanomanufacturing. Here, we demonstrate a noncontact microwave method for measuring the dielectric constant and conductivity (or geometry for samples of known dielectric properties) of materials in a millisecond. Such measurement times are compatible with current and future industrial needs, enabling real-time materials characterization and in-line control of processing variables without disrupting production. PMID:26592441

Light curing through glass ceramics with a second- and a third-generation LED curing unit: effect of curing mode on the degree of conversion of dual-curing resin cements.

PubMed

Flury, Simon; Lussi, Adrian; Hickel, Reinhard; Ilie, Nicoleta

2013-12-01

The aim of this study was to measure the degree of conversion (DC) of five dual-curing resin cements after different curing modes with a second- and a third-generation light-emitting diode (LED) curing unit. Additionally, irradiance of both light curing units was measured at increasing distances and through discs of two glass ceramics for computer-aided design/manufacturing (CAD/CAM). Irradiance and spectra of the Elipar FreeLight 2 (Standard Mode (SM)) and of the VALO light curing unit (High Power Mode (HPM) and Xtra Power Mode (XPM)) were measured with a MARC radiometer. Irradiance was measured at increasing distances (control) and through discs (1.5 to 6 mm thickness) of IPS Empress CAD and IPS e.max CAD. DC of Panavia F2.0, RelyX Unicem 2 Automix, SpeedCEM, BisCem, and BeautiCem SA was measured with an attenuated total reflectance-Fourier transform infrared spectrometer when self-cured (negative control) or light cured in SM for 40 s, HPM for 32 s, or XPM for 18 s. Light curing was performed directly (positive control) or through discs of either 1.5- or 3-mm thickness of IPS Empress CAD or IPS e.max CAD. DC was analysed with Kruskal-Wallis tests followed by pairwise Wilcoxon rank sum tests (α = 0.05). Maximum irradiances were 1,545 mW/cm(2) (SM), 2,179 mW/cm(2) (HPM), and 4,156 mW/cm(2) (XPM), and all irradiances decreased by >80 % through discs of 1.5 mm, ≥95 % through 3 mm, and up to >99 % through 6 mm. Generally, self-curing resulted in the lowest DC. For some cements, direct light curing did not result in higher DC compared to when light cured through ceramic discs. For other cements, light curing through ceramic discs of 3 mm generally reduced DC. Light curing was favourable for dual-curing cements. Some cements were more susceptible to variations in curing mode than others. When light curing a given cement, the higher irradiances of the third-generation LED curing unit resulted in similar DC compared to the second-generation one, though at shorter light curing times.

Effect of a nurse-led psychoeducational intervention on healthcare service utilization among adults with advanced cancer

PubMed Central

Martinez, Kathryn A.; Friese, Christopher; Kershaw, Trace; Given, Charles W.; Fendrick, A. Mark; Northouse, Laurel

2015-01-01

Purpose/Objectives To examine differences in healthcare service utilization among patients with advanced cancer participating in a nurse-led psychoeducational intervention. Design Secondary analysis of trial data. Setting Four Michigan cancer centers. Sample 484 patients with advanced cancer. Methods Patients were randomized to three groups: brief intervention, extensive intervention, or control. Medical chart review took place at baseline, three months, and six months to measure patients’ healthcare service utilization, defined as emergency department (ED) visits or inpatient hospitalizations. Multivariable logistic regression was used to examine the odds, by study arm, of visiting the ED and being hospitalized, controlling for patient sociodemographic and health status factors, as well as baseline health-related quality of life (QOL). Main Research Variables Study arm (brief, extensive, or control), ED visitation (one or more times versus none), inpatient hospitalizations (one or more times versus none), and covariates. Findings No significant differences in ED visits or inpatient hospitalizations were observed among study arms. ED visits were more frequent for patients with lung or colorectal cancer, more comorbidities, and lower baseline QOL. Baseline QOL was associated with inpatient hospitalizations in the adjusted analysis. Conclusions The psychoeducational intervention, either in brief or extensive format, is unlikely to increase healthcare service utilization. Implications for Nursing Efficacious nurse-led psychoeducational interventions to improve QOL do not place undue burdens on the healthcare system and may improve care. PMID:26148327

Microcomputer control soft tube measuring-testing instrument

NASA Astrophysics Data System (ADS)

Zhou, Yanzhou; Jiang, Xiu-Zhen; Wang, Wen-Yi

1993-09-01

Soft tube are key and easily spoiled parts used by the vehicles in the transportation with large numbers. Measuring and testing of the tubes were made by hands for a long time. Cooperating with Harbin Railway Bureau recently we have developed a new kind of automatical measuring and testing instrument In the paper the instrument structure property and measuring principle are presented in details. Centre of the system is a singlechip processor INTEL 80C31 . It can collect deal with data and display the results on LED. Furthermore it brings electromagnetic valves and motors under control. Five soft tubes are measured and tested in the same time all the process is finished automatically. On the hardware and software counter-electromagnetic disturbance methods is adopted efficiently so the performance of the instrument is improved significantly. In the long run the instrument is reliable and practical It solves a quite difficult problem in the railway transportation.

Enhancing health-care workers' understanding and thinking about people living with co-occurring mental health and substance use issues through consumer-led training.

PubMed

Roussy, Véronique; Thomacos, Nikos; Rudd, Annette; Crockett, Belinda

2015-10-01

Stigma and judgemental assumptions by health workers have been identified as key barriers to accessing health care for people living with co-occurring mental health and substance use issues (dual diagnosis). To evaluate the effectiveness of consumer-led training by people with dual diagnosis in improving the knowledge, understanding and role adequacy of community health staff to work with this consumer group. A controlled before-and-after study design with four waves of quantitative data collection was used. Qualitative data were collected to explore participants' views about training. Participants were staff from two community health services from Victoria, Australia. Recruitment occurred across various work areas: reception, oral health, allied health, counselling and health promotion. At baseline, all participants attended a 4-h clinician-led training session. The intervention consisted of a 3-h consumer-led training session, developed and delivered by seven individuals living with dual diagnosis. Outcome measures included understanding of dual diagnosis, participants' feelings of role adequacy and role legitimacy, personal views, and training outcomes and relevance. Consumer-led training was associated with a significant increase in understanding. The combination of clinician-led and consumer-led training was associated with a positive change in role adequacy. Consumer-led training is a promising approach to enhance primary health-care workers' understanding of the issues faced by dual-diagnosis consumers, with such positive effects persisting over time. Used alongside other organizational capacity building strategies, consumer-led training has the potential to help address stigma and judgemental attitudes by health workers and improve access to services for this consumer group. © 2013 John Wiley & Sons Ltd.

Applications of Light Emitting Diodes in Health Care.

PubMed

Dong, Jianfei; Xiong, Daxi

2017-11-01

Light emitting diodes (LEDs) have become the main light sources for general lighting, due to their high lumen efficiency and long life time. Moreover, their high bandwidth and the availability of diverse wavelength contents ranging from ultraviolet to infrared empower them with great controllability in tuning brightness, pulse durations and spectra. These parameters are the essential ingredients of the applications in medical imaging and therapies. Despite the fast advances in both LED technologies and their applications, few reviews have been seen to link the controllable emission properties of LEDs to these applications. The objective of this paper is to bridge this gap by reviewing the main control techniques of LEDs that enable creating enhanced lighting patterns for imaging and generating effective photon doses for photobiomodulation. This paper also provides the basic mechanisms behind the effective LED therapies in treating cutaneous and neurological diseases. The emerging field of optogenetics is also discussed with a focus on the application of LEDs. The multidisciplinary topics reviewed in this paper can help the researchers in LEDs, imaging, light therapy and optogenetics better understand the basic principles in each other's field; and hence to stimulate the application of LEDs in health care.

Psychometric Study of the Aberrant Behavior Checklist in Fragile X Syndrome and Implications for Targeted Treatment

ERIC Educational Resources Information Center

Sansone, Stephanie M.; Widaman, Keith F.; Hall, Scott S.; Reiss, Allan L.; Lightbody, Amy; Kaufmann, Walter E.; Berry-Kravis, Elizabeth; Lachiewicz, Ave; Brown, Elaine C.; Hessl, David

2012-01-01

Animal studies elucidating the neurobiology of fragile X syndrome (FXS) have led to multiple controlled trials in humans, with the Aberrant Behavior Checklist-Community (ABC-C) commonly adopted as a primary outcome measure. A multi-site collaboration examined the psychometric properties of the ABC-C in 630 individuals (ages 3-25) with FXS using…

The Influence of Internationalisation and National Identity on Teaching and Assessments in Higher Education

ERIC Educational Resources Information Center

Vinther, Jane; Slethaug, Gordon

2013-01-01

Recent and current changes in higher education have been both top-down and bottom-up, i.e. regulation and control measures from authorities on one hand and increasing numbers of international students on the other. This has led to a dilemma between unification and diversification. There is a marked pressure towards more testing, more streamlining…

Polymerization of a dual-cured cement through ceramic: LED curing light vs halogen lamp.

PubMed

Lopes, Lawrence Gonzaga; Franco, Eduardo Batista; Name Neto, Abrão; Herrera, Francyle S; Kurachi, Cristina; Castañeda-Espinosa, Juan C; Lauris, José Roberto Pereira

2004-12-01

The aim of this study was to investigate the influence of light source, LED unit and halogen lamp (HL), on the effectiveness of Enforce dual-cured cement cured under a ceramic disc. Three exposure times (60, 80 and 120 s) were also evaluated. Two experimental groups, in which the polymerization of the dual-cured cement was performed through a ceramic disc, and two control groups, in which the polymerization of the dual-cured cement was performed directly without presence of ceramic disc were subdivided into three subgroups (three different exposure times), with five specimens each: G1A- HL 60s; G1B- HL 80s; G1C- HL 120s; G2A- LED 60s; G2B- LED 80s; G2C- LED 120s; and control groups: G3A- HL 60s; G3B- HL 80s; G3C- HL 120s; G4A- LED 60s; G4B- LED 80s and G4C- LED 120s. Cement was applied in a steel matrix (4mm diameter, 1.2mm thickness). In the experimental groups, a ceramic disc was placed on top. The cement was light-cured through the ceramic by a HL and LED, however, the control groups were cured without the ceramic disc. The specimens were stored in a light-proof container at 37ºC for 24 hours, then Vickers hardness was determined. A four-way ANOVA and Tukey test (p£ 0.05) were performed. All specimens cured by LED for 60s showed inferior values compared with the halogen groups. In general, light-curing by LED for 80s and 120s was comparable to halogen groups (60s and 80s) and their control groups. LED technology can be viable for light-curing through conventional ceramic indirect restorations, when curing time is increased in relation to HL curing time.

Standardization of UV LED measurements

NASA Astrophysics Data System (ADS)

Eppeldauer, G. P.; Larason, T. C.; Yoon, H. W.

2015-09-01

Traditionally used source spectral-distribution or detector spectral-response based standards cannot be applied for accurate UV LED measurements. Since the CIE standardized rectangular-shape spectral response function for UV measurements cannot be realized with small spectral mismatch when using filtered detectors, the UV measurement errors can be several times ten percent or larger. The UV LEDs produce broadband radiation and both their peaks or spectral bandwidths can change significantly. The detectors used for the measurement of these LEDs also have different spectral bandwidths. In the discussed example, where LEDs with 365 nm peak are applied for fluorescent crack-recognition using liquid penetrant (non-destructive) inspection, the broadband radiometric LED (signal) measurement procedure is standardized. A UV LED irradiance-source was calibrated against an FEL lamp standard to determine its spectral irradiance. The spectral irradiance responsivity of a reference UV meter was also calibrated. The output signal of the reference UV meter was calculated from the spectral irradiance of the UV source and the spectral irradiance responsivity of the reference UV meter. From the output signal, both the integrated irradiance (in the reference plane of the reference meter) and the integrated responsivity of the reference meter were determined. Test UV meters calibrated for integrated responsivity against the reference UV meter, can be used to determine the integrated irradiance from a field UV source. The obtained 5 % (k=2) measurement uncertainty can be decreased when meters with spectral response close to a constant value are selected.

Digital LED Pixels: Instructions for use and a characterization of their properties.

PubMed

Jones, Pete R; Garcia, Sara E; Nardini, Marko

2016-12-01

This article details how to control light emitting diodes (LEDs) using an ordinary desktop computer. By combining digitally addressable LEDs with an off-the-shelf microcontroller (Arduino), multiple LEDs can be controlled independently and with a high degree of temporal, chromatic, and luminance precision. The proposed solution is safe (can be powered by a 5-V battery), tested (has been used in published research), inexpensive (∼ $60 + $2 per LED), highly interoperable (can be controlled by any type of computer/operating system via a USB or Bluetooth connection), requires no prior knowledge of electrical engineering (components simply require plugging together), and uses widely available components for which established help forums already exist. Matlab code is provided, including a 'minimal working example' of use suitable for use by beginners. Properties of the recommended LEDs are also characterized, including their response time, luminance profile, and color gamut. Based on these, it is shown that the LEDs are highly stable in terms of both luminance and chromaticity, and do not suffer from issues of warm-up, chromatic shift, and slow response times associated with traditional CRT and LCD monitor technology.

Changes in Physical Activity Behaviour and Health Risk Factors Following a Randomised Controlled Pilot Workplace Exercise Intervention

PubMed Central

Burn, Naomi; Norton, Lynda Heather; Drummond, Claire; Ian Norton, Kevin

2017-01-01

Background Declining physical activity (PA) and associated health risk factors are well established. Workplace strategies to increase PA may be beneficial to ameliorate extensive sedentary behavior. This study assessed the effectiveness of two PA interventions in workplace settings. Methods Interventions were conducted over 40 days targeting insufficiently active (<150 min/wk PA) and/or obese (BMI ≥ 30 kg/m2) adults; participants were randomly allocated to instructor-led exercise sessions either after-work (n = 25) or in-work (n = 23) with a 60 minPA/day common goal, or a wait-listed control group (n = 23). The programme commenced with low-moderate physical activities and progressed to high intensity game style activities by week six. Adherence and compliance were determined using both objective measures of daily PA time from HR monitors and self-report responses to PA questionnaires. Cardiovascular and metabolic risk factors were measured pre- and post-intervention. Changes across the study were analysed using Chi square and repeat-measures ANOVA. Results Adherence rates (completed pre and post-testing) were not different between groups (76.0 vs 65.2%). Compliance for the instructor-led sessions was higher for the after-work group (70.4% vs 26.4%, respectively). Increased total PA and aerobic fitness, and decreased weight in both intervention groups were found relative to controls. The after-work group undertook more vigorous PA, and had greater weight loss and fasting blood glucose improvement, relative to in-work participants and controls. Conclusions These workplace interventions resulted in rapid and dramatic increases in PA behaviour and important health benefits. Short, in-work PA sessions were less efficacious than longer after-work sessions. PMID:29546212

Changes in Physical Activity Behaviour and Health Risk Factors Following a Randomised Controlled Pilot Workplace Exercise Intervention.

PubMed

Burn, Naomi; Norton, Lynda Heather; Drummond, Claire; Ian Norton, Kevin

2017-01-01

Declining physical activity (PA) and associated health risk factors are well established. Workplace strategies to increase PA may be beneficial to ameliorate extensive sedentary behavior. This study assessed the effectiveness of two PA interventions in workplace settings. Interventions were conducted over 40 days targeting insufficiently active (<150 min/wk PA) and/or obese (BMI ≥ 30 kg/m 2 ) adults; participants were randomly allocated to instructor-led exercise sessions either after-work (n = 25) or in-work (n = 23) with a 60 minPA/day common goal, or a wait-listed control group (n = 23). The programme commenced with low-moderate physical activities and progressed to high intensity game style activities by week six. Adherence and compliance were determined using both objective measures of daily PA time from HR monitors and self-report responses to PA questionnaires. Cardiovascular and metabolic risk factors were measured pre- and post-intervention. Changes across the study were analysed using Chi square and repeat-measures ANOVA. Adherence rates (completed pre and post-testing) were not different between groups (76.0 vs 65.2%). Compliance for the instructor-led sessions was higher for the after-work group (70.4% vs 26.4%, respectively). Increased total PA and aerobic fitness, and decreased weight in both intervention groups were found relative to controls. The after-work group undertook more vigorous PA, and had greater weight loss and fasting blood glucose improvement, relative to in-work participants and controls. These workplace interventions resulted in rapid and dramatic increases in PA behaviour and important health benefits. Short, in-work PA sessions were less efficacious than longer after-work sessions.

Can patient-reported measurements of pain be used to improve cancer pain management? A systematic review and meta-analysis.

PubMed

Adam, Rosalind; Burton, Christopher D; Bond, Christine M; de Bruin, Marijn; Murchie, Peter

2017-12-01

Cancer pain is a distressing and complex experience. It is feasible that the systematic collection and feedback of patient-reported outcome measurements (PROMs) relating to pain could enhance cancer pain management. We aimed to conduct a systematic review of interventions in which patient-reported pain data were collected and fed back to patients and/or professionals in order to improve cancer pain control. MEDLINE, EMBASE and CINAHL databases were searched for randomised and non-randomised controlled trials in which patient-reported data were collected and fed back with the intention of improving pain management by adult patients or professionals. We conducted a narrative synthesis. We also conducted a meta-analysis of studies reporting pain intensity. 29 reports from 22 trials of 20 interventions were included. PROM measures were used to alert physicians to poorly controlled pain, to target pain education and to link treatment to management algorithms. Few interventions were underpinned by explicit behavioural theories. Interventions were inconsistently applied or infrequently led to changes in treatment. Narrative synthesis suggested that feedback of PROM data tended to increase discussions between patients and professionals about pain and/or symptoms overall. Meta-analysis of 12 studies showed a reduction in average pain intensity in intervention group participants compared with controls (mean difference=-0.59 (95% CI -0.87 to -0.30)). Interventions that assess and feedback cancer pain data to patients and/or professionals have so far led to modest reductions in cancer pain intensity. Suggestions are given to inform and enhance future PROM feedback interventions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Improving infection control in general practice.

PubMed

Farrow, S C; Zeuner, D; Hall, C

1999-03-01

Infection control measures in the health care setting should protect patients and staff from cross-infection. The prevention of harm is an essential part of good medical practice and failure might result in professional misconduct proceedings by the General Medical Council (GMC) and prosecution under the Health and Safety at Work legislation, as well as civil liability. For a health authority, overall responsibility for public health includes arrangements for the control of communicable diseases and infection in hospital and the community (NHS Management Executive, 1993), a function usually led by the Consultant in Communicable Disease Control (CCDC). This paper describes one district's collaborative approach between public health and GPs to assess and improve local infection control standards.

Evaluation of an LED Retrofit Project at Princeton University's Carl Icahn Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Robert; Murphy, Arthur; Perrin, Tess

At Princeton University’s Carl Icahn Laboratory, DOE’s Commercial Buildings Integration Program documented the implementation of LED retrofit products for recessed troffers, linear cove lighting, and downlights – as part of Princeton’s first building-wide interior LED project. The conversion to LED enables more extensive use of lighting controls to tailor the lighting to the task and limit the operating hours based on occupancy, and the estimated energy savings including controls is 62% compared to the incumbent system.

Token reinforcement, choice, and self-control in pigeons.

PubMed Central

Jackson, K; Hackenberg, T D

1996-01-01

Pigeons were exposed to self-control procedures that involved illumination of light-emitting diodes (LEDs) as a form of token reinforcement. In a discrete-trials arrangement, subjects chose between one and three LEDs; each LED was exchangeable for 2-s access to food during distinct posttrial exchange periods. In Experiment 1, subjects generally preferred the immediate presentation of a single LED over the delayed presentation of three LEDs, but differences in the delay to the exchange period between the two options prevented a clear assessment of the relative influence of LED delay and exchange-period delay as determinants of choice. In Experiment 2, in which delays to the exchange period from either alternative were equal in most conditions, all subjects preferred the delayed three LEDs more often than in Experiment-1. In Experiment 3, subjects preferred the option that resulted in a greater amount of food more often if the choices also produced LEDs than if they did not. In Experiment 4, preference for the delayed three LEDs was obtained when delays to the exchange period were equal, but reversed in favor of an immediate single LED when the latter choice also resulted in quicker access to exchange periods. The overall pattern of results suggests that (a) delay to the exchange period is a more critical determinant of choice than is delay to token presentation; (b) tokens may function as conditioned reinforcers, although their discriminative properties may be responsible for the self-control that occurs under token reinforcer arrangements; and (c) previously reported differences in the self-control choices of humans and pigeons may have resulted at least in part from the procedural conventions of using token reinforcers with human subjects and food reinforcers with pigeon subjects. PMID:8755699

The effects of a peer-led training program on female students’ self-esteem in public secondary schools in Shiraz

PubMed Central

KAVEH, MOHAMMAD HOSSEIN; HESAMPOUR, MARYAM; GHAHREMANI, LEILA; TABATABAEE, HAMID REZA

2014-01-01

Introduction: Low self-esteem in adolescence is one of the risk factors for negative outcomes in important domains of adulthood life. Due to the lack of trials based on modern methods of teaching in the field of self-esteem, this study aimed to investigate the effects of a peer-led training program on female second graders’ self-esteem in public secondary schools in Shiraz. Methods: The present study is an educational controlled trial. 223 public school female students in the second grade were selected with the Multi-stage random cluster sampling method. The selected Schools were assigned randomly to experimental and control groups. The data were collected before, one and six weeks after an intervention in the control and experimental group, using Pope's 5-scale test of self-esteem with Cronbach's alpha reliability of 0.85. The educational intervention in the experimental group was a peer-led approach, using discussion techniques in small groups (the group work, role play and group play) and a 5-volume training manual. The data were analyzed through SPSS, version 14, using Mann-Whitney test, Chi-square test, Wilcoxon and repeated measure Analysis of Variance (ANOVA). Results: The results showed that the mean of total self-esteem scores and the sub-scales (except for family self-esteem) in the experimental groups compared to that in the control groups, one and six weeks after the peer-led based approach intervention was significantly different (p<0.001). Before the intervention, the mean for self-esteem in the experimental groups was 51.80±13.91 but in the first post-test and second post-test the mean increased to 73.72±12.94, and 69.48±12.63, respectively. Before the educational intervention, the frequency distribution of females’ self-esteem in the experimental and control groups did not differ significantly from each other (p=0.337). But during one and six weeks after the intervention, a significant increase was observed between the two groups (p<0.001). Conclusion: The results of this study suggest that peer education is an effective way to promote self-esteem in adolescents. Providing opportunities such as a peer-led approach can help adolescents to acquire practical ways to increase their self-esteem. PMID:25512922

The effects of a peer-led training program on female students' self-esteem in public secondary schools in Shiraz.

PubMed

Kaveh, Mohammad Hossein; Hesampour, Maryam; Ghahremani, Leila; Tabatabaee, Hamid Reza

2014-04-01

Low self-esteem in adolescence is one of the risk factors for negative outcomes in important domains of adulthood life. Due to the lack of trials based on modern methods of teaching in the field of self-esteem, this study aimed to investigate the effects of a peer-led training program on female second graders' self-esteem in public secondary schools in Shiraz. The present study is an educational controlled trial. 223 public school female students in the second grade were selected with the Multi-stage random cluster sampling method. The selected Schools were assigned randomly to experimental and control groups. The data were collected before, one and six weeks after an intervention in the control and experimental group, using Pope's 5-scale test of self-esteem with Cronbach's alpha reliability of 0.85. The educational intervention in the experimental group was a peer-led approach, using discussion techniques in small groups (the group work, role play and group play) and a 5-volume training manual. The data were analyzed through SPSS, version 14, using Mann-Whitney test, Chi-square test, Wilcoxon and repeated measure Analysis of Variance (ANOVA). The results showed that the mean of total self-esteem scores and the sub-scales (except for family self-esteem) in the experimental groups compared to that in the control groups, one and six weeks after the peer-led based approach intervention was significantly different (p<0.001). Before the intervention, the mean for self-esteem in the experimental groups was 51.80±13.91 but in the first post-test and second post-test the mean increased to 73.72±12.94, and 69.48±12.63, respectively. Before the educational intervention, the frequency distribution of females' self-esteem in the experimental and control groups did not differ significantly from each other (p=0.337). But during one and six weeks after the intervention, a significant increase was observed between the two groups (p<0.001). The results of this study suggest that peer education is an effective way to promote self-esteem in adolescents. Providing opportunities such as a peer-led approach can help adolescents to acquire practical ways to increase their self-esteem.

Methods and apparatus for controlling respective load currents of multiple series-connected loads

DOEpatents

Datta, Michael; Lys, Ihor

2014-05-27

A lighting apparatus (100) includes one or more first LEDs (202) for generating a first spectrum of radiation (503), and one or more second LEDs (204) for generating a second different spectrum radiation (505). The first and second LEDs are electrically connected in series between a first node (516A) and a second node (516B), between which a series current (550) flows with the application of an operating voltage (516) across the nodes. A controllable current path (518) is connected in parallel with one or both of the first and second LEDs so as to at least partially divert the series current, such that a first current (552) through the first LED(s) and a second current (554) through the second LED(s) are different. Such current diversion techniques may be employed to compensate for shifts in color or color temperature of generated light during thermal transients, due to different temperature-dependent current-to-flux relationships for different types of LEDs.

Effects of a Structured Discharge Planning Program on Perceived Functional Status, Cardiac Self-efficacy, Patient Satisfaction, and Unexpected Hospital Revisits Among Filipino Cardiac Patients: A Randomized Controlled Study.

PubMed

Cajanding, Ruff Joseph

Cardiovascular diseases remain the leading cause of morbidity and mortality among Filipinos and are responsible for a very large number of hospital readmissions. Comprehensive discharge planning programs have demonstrated positive benefits among various populations of patients with cardiovascular disease, but the clinical and psychosocial effects of such intervention among Filipino patients with acute myocardial infarction (AMI) have not been studied. In this study we aimed to determine the effectiveness of a nurse-led structured discharge planning program on perceived functional status, cardiac self-efficacy, patient satisfaction, and unexpected hospital revisits among Filipino patients with AMI. A true experimental (randomized control) 2-group design with repeated measures and data collected before and after intervention and at 1-month follow-up was used in this study. Participants were assigned to either the control (n = 68) or the intervention group (n = 75). Intervention participants underwent a 3-day structured discharge planning program implemented by a cardiovascular nurse practitioner, which is comprised of a series of individualized lecture-discussion, provision of feedback, integrative problem solving, goal setting, and action planning. Control participants received standard routine care. Measures of functional status, cardiac self-efficacy, and patient satisfaction were measured at baseline; cardiac self-efficacy and patient satisfaction scores were measured prior to discharge, and perceived functional status and number of revisits were measured 1 month after discharge. Participants in the intervention group had significant improvement in functional status, cardiac self-efficacy, and patient satisfaction scores at baseline and at follow-up compared with the control participants. Furthermore, participants in the intervention group had significantly fewer hospital revisits compared with those who received only standard care. The results demonstrate that a nurse-led structured discharge planning program is an effective intervention in improving perceived functional health status, cardiac self-efficacy, and patient satisfaction, while reducing the number of unexpected hospital revisits, among Filipino patients with AMI. It is recommended that this intervention be incorporated in the optimal care of patients being discharged with an AMI.

Cluster randomised controlled trial of a peer-led lifestyle intervention program: study protocol for the Kerala diabetes prevention program

PubMed Central

2013-01-01

Background India currently has more than 60 million people with Type 2 Diabetes Mellitus (T2DM) and this is predicted to increase by nearly two-thirds by 2030. While management of those with T2DM is important, preventing or delaying the onset of the disease, especially in those individuals at ‘high risk’ of developing T2DM, is urgently needed, particularly in resource-constrained settings. This paper describes the protocol for a cluster randomised controlled trial of a peer-led lifestyle intervention program to prevent diabetes in Kerala, India. Methods/design A total of 60 polling booths are randomised to the intervention arm or control arm in rural Kerala, India. Data collection is conducted in two steps. Step 1 (Home screening): Participants aged 30–60 years are administered a screening questionnaire. Those having no history of T2DM and other chronic illnesses with an Indian Diabetes Risk Score value of ≥60 are invited to attend a mobile clinic (Step 2). At the mobile clinic, participants complete questionnaires, undergo physical measurements, and provide blood samples for biochemical analysis. Participants identified with T2DM at Step 2 are excluded from further study participation. Participants in the control arm are provided with a health education booklet containing information on symptoms, complications, and risk factors of T2DM with the recommended levels for primary prevention. Participants in the intervention arm receive: (1) eleven peer-led small group sessions to motivate, guide and support in planning, initiation and maintenance of lifestyle changes; (2) two diabetes prevention education sessions led by experts to raise awareness on T2DM risk factors, prevention and management; (3) a participant handbook containing information primarily on peer support and its role in assisting with lifestyle modification; (4) a participant workbook to guide self-monitoring of lifestyle behaviours, goal setting and goal review; (5) the health education booklet that is given to the control arm. Follow-up assessments are conducted at 12 and 24 months. The primary outcome is incidence of T2DM. Secondary outcomes include behavioural, psychosocial, clinical, and biochemical measures. An economic evaluation is planned. Discussion Results from this trial will contribute to improved policy and practice regarding lifestyle intervention programs to prevent diabetes in India and other resource-constrained settings. Trial registration Australia and New Zealand Clinical Trials Registry: ACTRN12611000262909. PMID:24180316

Plant experiments with light-emitting diode module in Svet space greenhouse

NASA Astrophysics Data System (ADS)

Ilieva, Iliana; Ivanova, Tania; Naydenov, Yordan; Dandolov, Ivan; Stefanov, Detelin

2010-10-01

Light is necessary for photosynthesis and shoot orientation in the space plant growth facilities. Light modules (LM) must provide sufficient photosynthetic photon flux for optimal efficiency of photosynthetic processes and also meet the constraints for power, volume and mass. A new LM for Svet space greenhouse using Cree® XLamp® 7090 XR light-emitting diodes (LEDs) was developed. Monochromic LEDs emitting in the red, green, and blue regions of the spectrum were used. The LED-LM contains 36 LED spots - 30 LED spots with one red, green and blue LED and 6 LED spots with three red LEDs. Digital Multiplex Control Unit controls the LED spots and can set 231 levels of light intensity thus achieving Photosynthetic Photon Flux Density (PPFD) in the range 0-400 μmol m -2 s -1 and different percentages of the red, green and blue light, depending on the experimental objectives. Two one-month experiments with plants - lettuce and radicchio were carried out at 400 μmol m -2 s -1 PPFD (high light - HL) and 220 μmol m -2 s -1 PPFD (low light - LL) and 70% red, 20% green and 10% blue light composition. To evaluate the efficiency of photosynthesis, in vivo modulated chlorophyll fluorescence was measured by Pulse Amplitude Modulation (PAM) fluorometer on leaf discs and the following parameters: effective quantum yield of Photosystem II ( ΦPSII) and non-photochemical quenching (NPQ) were calculated. Both lettuce and radicchio plants grown at LL express higher photochemical activity of Photosystem II (PSII) than HL grown plants, evaluated by ΦPSII. Accelerated rise in NPQ in both LL grown plants was observed, while steady state NPQ values were higher in LL grown lettuce plants and did not differ in LL and HL grown radicchio plants. The extent of photoinhibition process in both plants was evaluated by changes in malonedialdehyde (MDA) concentration, peroxidase (POX) activity and hydrogen peroxide (H 2O 2) content. Accumulation of high levels of MDA and increased POX activity correlating with decreased H 2O 2 content were observed in both HL grown plants. These biochemical indicators revealed higher sensitivity to photodamage in HL grown lettuce and radicchio plants. LL conditions resulted in more effective functioning of PSII than HL when lettuce and radicchio plants were grown at 70% red, 20% green and 10% blue light composition.

(11-22) semipolar InGaN emitters from green to amber on overgrown GaN on micro-rod templates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bai, J., E-mail: j.bai@sheffield.ac.uk; Xu, B.; Guzman, F. G.

2015-12-28

We demonstrate semipolar InGaN single-quantum-well light emitting diodes (LEDs) in the green, yellow-green, yellow and amber spectral region. The LEDs are grown on our overgrown semipolar (11-22) GaN on micro-rod array templates, which are fabricated on (11-22) GaN grown on m-plane sapphire. Electroluminescence measurements on the (11-22) green LED show a reduced blue-shift in the emission wavelength with increasing driving current, compared to a reference commercial c-plane LED. The blue-shifts for the yellow-green and yellow LEDs are also significantly reduced. All these suggest an effective suppression in quantum confined Stark effect in our (11-22) LEDs. On-wafer measurements yield a linearmore » increase in the light output with the current, and external quantum efficiency demonstrates a significant improvement in the efficiency-droop compared to a commercial c-plane LED. Electro-luminescence polarization measurements show a polarization ratio of about 25% in our semipolar LEDs.« less

Treatment of chemotherapy-induced oral mucositis with light-emitting diode.

PubMed

Corti, Luigi; Chiarion-Sileni, Vanna; Aversa, Savina; Ponzoni, Alberto; D'Arcais, Raimondo; Pagnutti, Stefano; Fiore, Davide; Sotti, Guido

2006-04-01

The aim of this study was to assess the clinical effectiveness of phototherapy with noncoherent light in the alleviation of chemotherapy-induced mucositis in patients with metastatic cancer. Mucositis occurs in more than 40% of chemotherapy-treated patients, significantly reducing the quality of their lives. Many different interventions have been evaluated to reduce oral mucositis. Recently, good results have been achieved by phototherapy with photoradiation, a technique which has virtually no side effects. Some clinical results seem to indicate that also phototherapy through noncoherent light emissions which can be produced by less expensive light sources such as light-emitting diodes (LEDs) may be effective. However, until now, no studies have been available on this subject. Twelve patients, aged from 34 to 82, selected on the basis of a diagnosis of chemotherapy-induced oral mucositis, were treated intra-orally through a noncoherent LED emission, wavelength 645 +/- 15 nm, 7.8 mW, fluence 0.99 J/cm(2), three times a day for 1 week. Mucositis was scored daily using the Daily Mucositis Index (DMI), a scale that evaluates the disease evolution through 16 different items. The primary end-point assessed was the time to recovery, from the start of LED treatment, compared to a nonrandomized control group of 12 patients with comparable stomatitis. The median healing time, expressed as the DMI decrease, was 1.7 (range 1-2.8) and, in seven LED-treated patients, was shorter than in the control group. The healing rate (measured as the ratio of the DMIs) increased from 117% to 164%. This pilot study shows that LED treatment is safe and capable of reducing the duration of chemotherapy-induced mucositis. This result needs to be confirmed in an adequate phase III study.

Effectiveness of structured, hospital-based, nurse-led atrial fibrillation clinics: a comparison between a real-world population and a clinical trial population.

PubMed

Qvist, Ina; Hendriks, Jeroen M L; Møller, Dorthe S; Albertsen, Andi E; Mogensen, Helle M; Oddershede, Gitte D; Odgaard, Annette; Mortensen, Leif Spange; Johnsen, Søren Paaske; Frost, Lars

2016-01-01

A previous randomised trial showed that structured, nurse-led atrial fibrillation (AF) care is superior to conventional AF care, although further research is needed to determine the outcomes of such care in a real-world setting. We compared the outcomes of patients in real-world, nurse-led, structured hospital AF clinics with the outcomes of a randomised trial of the efficacy of a nurse-led AF clinic, with respect to a composite outcome of cardiovascular-related hospitalisation and death. All patients were referred to the AF nurse specialist by cardiologists. The AF nurse specialist provided patient education, risk-factor control and stimulated empowerment and compliance. During follow-up, treatment was adjusted according to clinical guidelines. Patient education was repeated, and compliance with medical treatment was controlled. The study size was powered as a non-inferiority study. Outcome measures were adjudicated by the same principles in both cohorts. A total of 596 patients from the real world and 356 patients from a clinical trial were included in this study. No significant difference between groups with respect to age, type of AF or CHA2DS2VASc score was found. The composite primary end point occurred with an incidence rate of 8.0 (95% CI 6.1 to 10.4) per 100 person-years in the real-world population and 8.3 (95% CI 6.3 to 10.9) per 100 person-years in the clinical trial, with a crude HR of 0.83 (95% CI 0.56 to 1.23). Structured, nurse-led, hospital-based AF care appears to be effective, and patient outcomes in an actual, hospital-based, structured AF care are as least as good as those in trial settings.

UV-LED-based charge control for LISA

NASA Astrophysics Data System (ADS)

Olatunde, Taiwo; Shelley, Ryan; Chilton, Andrew; Ciani, Giacomo; Mueller, Guido; Conklin, John

2014-03-01

The test masses inside the LISA gravitational reference sensors (GRS) must maintain almost pure geodesic motion for gravitational waves to be successfully detected. The residual accelerations have to stay below 3fm/s2/rtHz at all frequencies between 0.1 and 3 mHz. One of the well known noise sources is associated with the charges on the test masses which couple to stray electrical potentials and external electro-magnetic fields. The LISA pathfinder (LPF) will use Hg-discharge lamps emitting mostly around 253 nm to discharge the test masses via photoemission in its 2015/16 flight. A future LISA mission launched around 2030 will likely replace the lamps with newer UV-LEDs. UV-LEDs have a lower mass, a better power efficiency, and are smaller than their Hg counterparts. Furthermore, the latest generation produces light at 240 nm, with energy well above the work function of pure gold. I will describe a preliminary design for effective charge control through photoelectric effect by using these LEDs. The effectiveness of this method is verified by taking Quantum Efficiency (QE) measurements which relate the number of electrons emitted to the number of photons incident on the Au test mass surface. This presentation addresses our initial results and future plans which includes implementation and testing in the UF torsion pendulum and space-qualification in a small satellite mission which will launch in the summer of 2014, through a collaboration with Stanford, KACST, and NASA Ames Research Center.

Position-controlled MOVPE growth and electro-optical characterization of core-shell InGaN/GaN microrod LEDs

NASA Astrophysics Data System (ADS)

Schimpke, Tilman; Lugauer, H.-J.; Avramescu, A.; Varghese, T.; Koller, A.; Hartmann, J.; Ledig, J.; Waag, A.; Strassburg, M.

2016-03-01

Today's InGaN-based white LEDs still suffer from a significant efficiency reduction at elevated current densities, the so-called "Droop". Core-shell microrods, with quantum wells (QWs) covering their entire surface, enable a tremendous increase in active area scaling with the rod's aspect ratio. Enlarging the active area on a given footprint area is a viable and cost effective route to mitigate the droop by effectively reducing the local current density. Microrods were grown in a large volume metal-organic vapor phase epitaxy (MOVPE) reactor on GaN-on-sapphire substrates with a thin, patterned SiO2 mask for position control. Out of the mask openings, pencil-shaped n-doped GaN microrod cores were grown under conditions favoring 3D growth. In a second growth step, these cores are covered with a shell containing a quantum well and a p-n junction to form LED structures. The emission from the QWs on the different facets was studied using resonant temperature-dependent photoluminescence (PL) and cathodoluminescence (CL) measurements. The crystal quality of the structures was investigated by transmission electron microscopy (TEM) showing the absence of extended defects like threading dislocations in the 3D core. In order to fabricate LED chips, dedicated processes were developed to accommodate for the special requirements of the 3D geometry. The electrical and optical properties of ensembles of tens of thousands microrods connected in parallel are discussed.

An inexpensive and stable LED Sun photometer for measuring the water vapor column over South Texas from 1990 to 2001

NASA Astrophysics Data System (ADS)

Mims, Forrest M.

2002-07-01

A Sun photometer that uses near-infrared light-emitting diodes (LEDs) as spectrally-selective photodetectors has measured total column water vapor in South Texas since February 1990. The 12 years of solar noon observations to date are correlated with upper air soundings at Del Rio, Texas (r2 = 0.75), and highly correlated with measurements by a Microtops II filter Sun photometer (r2 = 0.94). LEDs are inexpensive and have far better long term stability than the interference filters in conventional Sun photometers. The LED Sun photometer therefore provides an inexpensive, stable and portable means for measuring column water vapor.

Demonstration of AC and DC charge control for the LISA test masses

NASA Astrophysics Data System (ADS)

Olatunde, Taiwo Janet

2018-01-01

Taiwo Olatunde, Stephen Apple, Andrew Chilton, Samantha Parry, Peter Wass, Guido Mueller, John W. Conklin The residual test mass acceleration in LISA must be below 3 fm/s2/√Hz at all frequencies between 0.1 and 3 mHz. Test mass charge coupled with stray electrical potentials and external electromagnetic fields is a well-known source of acceleration noise. LISA Pathfinder uses Hg lamps emitting mostly around 254 nm to discharge the test masses via photoemission, but a future LISA mission launched around 2030 will likely replace the lamps with newer UV LEDs with lower mass, better power efficiency, smaller size and higher bandwidth. This presentation will discuss charge control demonstrated on the torsion pendulum in AC and DC modes at the University of Florida using latest generation UV LEDs producing light at 240 nm with energy above the work function of pure Au. Initial results of Au quantum efficiency measurements (number of emitted electrons per incident photons) which is critical for bi-polar charge control will also be presented.

Power bases and attribution in three cultures.

PubMed

Alanazi, Falah M; Rodrigues, Aroldo

2003-06-01

The authors used a Saudi context to verify the cross-cultural generality of findings (A. Rodrigues & K. L. Lloyd, 1998) reported for U.S. and Brazilian samples in which compliant behavior caused by reward, informational, and referent influences was perceived as more controllable and more internal than compliant behavior resulting from legitimate, expert, and coercive influences. This differential attribution led, in turn, to different affective and behavioral responses. In the present study, cognitive and affective reactions of Saudi students were measured with regard to compliant behavior (leading to a good outcome or a bad outcome) caused by each of the 6 bases of power described by B. H. Raven (1965). As expected, power bases had significant effects. However, when the outcome of the compliant behavior was bad, compliant behavior caused by a coercive influence led to the perception of more internality and controllability. Also--and not found in previous studies--the perception of less internality and controllability of compliant behavior was caused by an informational influence. Findings are discussed in the light of related research and Saudi cultural characteristics.

Cost-effectiveness of nurse-led disease management for heart failure in an ethnically diverse urban community.

PubMed

Hebert, Paul L; Sisk, Jane E; Wang, Jason J; Tuzzio, Leah; Casabianca, Jodi M; Chassin, Mark R; Horowitz, Carol; McLaughlin, Mary Ann

2008-10-21

Randomized, controlled trials have shown that nurse-led disease management for patients with heart failure can reduce hospitalizations. Less is known about the cost-effectiveness of these interventions. To estimate the cost-effectiveness of a nurse-led disease management intervention over 12 months, implemented in a randomized, controlled effectiveness trial. Cost-effectiveness analysis conducted alongside a randomized trial. Medical costs from administrative records, and self-reported quality of life and nonmedical costs from patient surveys. Patients with systolic dysfunction recruited from ambulatory clinics in Harlem, New York. 12 months. Societal and payer. 12-month program that involved 1 face-to-face encounter with a nurse and regular telephone follow-up. Quality of life as measured by the Health Utilities Index Mark 3 and EuroQol-5D and cost-effectiveness as measured by the incremental cost-effectiveness ratio (ICER). Costs and quality of life were higher in the nurse-managed group than the usual care group. The ICERs over 12 months were $17,543 per EuroQol-5D-based quality-adjusted life-year (QALY) and $15,169 per Health Utilities Index Mark 3-based QALY (in 2001 U.S. dollars). From a payer perspective, the ICER ranged from $3673 to $4495 per QALY. Applying national prices in place of New York City prices yielded a societal ICER of $13,460 to $15,556 per QALY. Cost-effectiveness acceptability curves suggest that the intervention was most likely cost-effective for patients with less severe (New York Heart Association classes I to II) heart failure. The trial was conducted in an ethnically diverse, inner-city neighborhood; thus, results may not be generalizable to other communities. Over 12 months, the nurse-led disease management program was a reasonably cost-effective way to reduce the burden of heart failure in this community.

Effects of smartphone use with and without blue light at night in healthy adults: A randomized, double-blind, cross-over, placebo-controlled comparison.

PubMed

Heo, Jung-Yoon; Kim, Kiwon; Fava, Maurizio; Mischoulon, David; Papakostas, George I; Kim, Min-Ji; Kim, Dong Jun; Chang, Kyung-Ah Judy; Oh, Yunhye; Yu, Bum-Hee; Jeon, Hong Jin

2017-04-01

Smartphones deliver light to users through Light Emitting Diode (LED) displays. Blue light is the most potent wavelength for sleep and mood. This study investigated the immediate effects of smartphone blue light LED on humans at night. We investigated changes in serum melatonin levels, cortisol levels, body temperature, and psychiatric measures with a randomized, double-blind, cross-over, placebo-controlled design of two 3-day admissions. Each subject played smartphone games with either conventional LED or suppressed blue light from 7:30 to 10:00PM (150 min). Then, they were readmitted and conducted the same procedure with the other type of smartphone. Serum melatonin levels were measured in 60-min intervals before, during and after use of the smartphones. Serum cortisol levels and body temperature were monitored every 120 min. The Profile of Mood States (POMS), Epworth Sleepiness Scale (ESS), Fatigue Severity Scale (FSS), and auditory and visual Continuous Performance Tests (CPTs) were administered. Among the 22 participants who were each admitted twice, use of blue light smartphones was associated with significantly decreased sleepiness (Cohen's d = 0.49, Z = 43.50, p = 0.04) and confusion-bewilderment (Cohen's d = 0.53, Z = 39.00, p = 0.02), and increased commission error (Cohen's d = -0.59, t = -2.64, p = 0.02). Also, users of blue light smartphones experienced a longer time to reach dim light melatonin onset 50% (2.94 vs. 2.70 h) and had increases in body temperature, serum melatonin levels, and cortisol levels, although these changes were not statistically significant. Use of blue light LED smartphones at night may negatively influence sleep and commission errors, while it may not be enough to lead to significant changes in serum melatonin and cortisol levels. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cardiovascular risk outcome and program evaluation of a cluster randomised controlled trial of a community-based, lay peer led program for people with diabetes.

PubMed

Riddell, M A; Dunbar, J A; Absetz, P; Wolfe, R; Li, H; Brand, M; Aziz, Z; Oldenburg, B

2016-08-24

The 2013 Global Burden of Disease Study demonstrated the increasing burden of diabetes and the challenge it poses to the health systems of all countries. The chronic and complex nature of diabetes requires active self-management by patients in addition to clinical management in order to achieve optimal glycaemic control and appropriate use of available clinical services. This study is an evaluation of a "real world" peer support program aimed at improving the control and management of type 2 diabetes (T2DM) in Australia. The trial used a randomised cluster design with a peer support intervention and routine care control arms and 12-month follow up. Participants in both arms received a standardised session of self-management education at baseline. The intervention program comprised monthly community-based group meetings over 12 months led by trained peer supporters and active encouragement to use primary health care and other community resources and supports related to diabetes. Clinical, behavioural and other measures were collected at baseline, 6 and 12 months. The primary outcome was the predicted 5 year cardiovascular disease risk using the United Kingdom Prospective Diabetes Study (UKPDS) Risk Equation at 12 months. Secondary outcomes included clinical measures, quality of life, measures of support, psychosocial functioning and lifestyle measures. Eleven of 12 planned groups were successfully implemented in the intervention arm. Both the usual care and the intervention arms demonstrated a small reduction in 5 year UKPDS risk and the mean values for biochemical and anthropometric outcomes were close to target at 12 months. There were some small positive changes in self-management behaviours. The positive changes in self-management behaviours among intervention participants were not sufficient to reduce cardiovascular risk, possibly because approximately half of the study participants already had quite well controlled T2DM at baseline. Future research needs to address how to enhance community based programs so that they reach and benefit those most in need of resources and supports to improve metabolic control and associated clinical outcomes. Australian New Zealand Clinical Trials Registry (ANZCTR) ACTRN12609000469213 . Registered 16 June 2009.

The spacecraft control laboratory experiment optical attitude measurement system

NASA Technical Reports Server (NTRS)

Welch, Sharon S.; Montgomery, Raymond C.; Barsky, Michael F.

1991-01-01

A stereo camera tracking system was developed to provide a near real-time measure of the position and attitude of the Spacecraft COntrol Laboratory Experiment (SCOLE). The SCOLE is a mockup of the shuttle-like vehicle with an attached flexible mast and (simulated) antenna, and was designed to provide a laboratory environment for the verification and testing of control laws for large flexible spacecraft. Actuators and sensors located on the shuttle and antenna sense the states of the spacecraft and allow the position and attitude to be controlled. The stereo camera tracking system which was developed consists of two position sensitive detector cameras which sense the locations of small infrared LEDs attached to the surface of the shuttle. Information on shuttle position and attitude is provided in six degrees-of-freedom. The design of this optical system, calibration, and tracking algorithm are described. The performance of the system is evaluated for yaw only.

Colorectal surgery and surgical site infection: is a change of attitude necessary?

PubMed

Elia-Guedea, Manuela; Cordoba-Diaz de Laspra, Elena; Echazarreta-Gallego, Estibaliz; Valero-Lazaro, María Isabel; Ramirez-Rodriguez, Jose Manuel; Aguilella-Diago, Vicente

2017-07-01

Surgical site infection (SSI) can be as high as 30% in patients undergoing colorectal surgery and is associated with an increase in morbidity and mortality. The aim of this study is to evaluate the impact of a set of simple preventive measures that have resulted in a reduction in surgical site infection in colorectal surgery. Prospective study with two groups of patients treated in the colorectal unit of the "Clinico Universitario Lozano Blesa" hospital in Zaragoza. One group was subject to our measures from February to May 2015. The control group was given conventional treatment within a time period of 3 months before the set of measures were implemented. One hundred forty-nine patients underwent a major colorectal surgical procedure. Seventy (47%) belonged to the control group and were compared to the remaining 79 patients (53% of the total), who were subject to our treatment bundle in the period tested. Comparing the two groups revealed that our set of measures led to a general reduction in SSI (31.4 vs. 13.6%, p = 0.010) and in superficial site infection (17.1 vs. 2.5%, p = 0.002). As a consequence, the postoperative hospital stay was shortened (10.0 vs. 8.0 days, p = 0.048). However, it did not, the number of readmissions nor the re-operation rate. SSI was clearly related to open surgery. The preventive set of measures applied in colorectal surgery led to a significant reduction of the SSI and of the length of hospital stay.

The Efficacy of a Nurse-Led Disease Management Program in Improving the Quality of Life for Patients with Chronic Kidney Disease: A Meta-Analysis.

PubMed

Chen, Chong-Cheng; Chen, Yi; Liu, Xia; Wen, Yue; Ma, Deng-Yan; Huang, Yue-Yang; Pu, Li; Diao, Yong-Shu; Yang, Kun

2016-01-01

The impacts of nurse-led disease management programs on the quality of life for patients with chronic kidney disease have not been extensively studied. Furthermore, results of the existing related studies are inconsistent. The focus of the proposed meta-analysis is to evaluate the efficacy of nurse-led disease management programs in improving the quality of life for patients with chronic kidney disease. Literature survey was performed to identify the eligible studies from PubMed, Current Nursing and Allied Health Literature, and Cochrane Central Register of Controlled Trials with predefined terms. The outcome measured was quality of life. This meta-analysis was conducted in line with recommendations from the preferred reporting items for systematic reviews and meta-analyses. Eight studies comprising a total of 1520 patients were included in this meta-analysis, with 766 patients assigned to the nurse-led disease management program. Nurse-led disease management improved the quality of life in terms of symptoms, sleep, staff encouragement, pain, general health perception, energy/fatigue, overall health and mental component summary when evaluated 6 weeks after the beginning of intervention. When evaluated 12 weeks later, the quality of life in terms of symptoms, sleep, staff encouragement, energy/fatigue, and physical component summary was improved. Stratified by the modalities of dialysis, similar results of pooled analyses were observed for patients with peritoneal dialysis or hemodialysis, compared with the overall analyses. The results of sensitivity analyses were the same as the primary analyses. The symmetric funnel plot suggested that the possibility of potential publication bias was relatively low. Nurse-led disease management program seems effective to improve some parameters of quality of life for patients with chronic kidney disease. However, the seemingly promising results should be cautiously interpreted and generalized and still need to be confirmed through well-designed large-scale prospective randomized controlled trials.

Assessment of contamination and misclassification biases in a randomized controlled trial of a social network peer education intervention to reduce HIV risk behaviors among drug users and risk partners in Philadelphia, PA and Chiang Mai, Thailand.

PubMed

Simmons, Nicole; Donnell, Deborah; Ou, San-San; Celentano, David D; Aramrattana, Apinun; Davis-Vogel, Annet; Metzger, David; Latkin, Carl

2015-10-01

Controlled trials of HIV prevention and care interventions are susceptible to contamination. In a randomized controlled trial of a social network peer education intervention among people who inject drugs and their risk partners in Philadelphia, PA and Chiang Mai, Thailand, we tested a contamination measure based on recall of intervention terms. We assessed the recall of test, negative and positive control terms among intervention and control arm participants and compared the relative odds of recall of test versus negative control terms between study arms. The contamination measures showed good discriminant ability among participants in Chiang Mai. In Philadelphia there was no evidence of contamination and little evidence of diffusion. In Chiang Mai there was strong evidence of diffusion and contamination. Network structure and peer education in Chiang Mai likely led to contamination. Recall of intervention materials can be a useful method to detect contamination in experimental interventions.

LED-based UV source for monitoring spectroradiometer properties

NASA Astrophysics Data System (ADS)

Sildoja, Meelis-Mait; Nevas, Saulius; Kouremeti, Natalia; Gröbner, Julian; Pape, Sven; Pendsa, Stefan; Sperfeld, Peter; Kemus, Fabian

2018-06-01

A compact and stable UV monitoring source based on state-of-the-art commercially available ultraviolet light emitting diodes (UV-LEDs) has been developed. It is designed to trace the radiometric stability—both responsivity and wavelength scale—of array spectroradiometers measuring direct solar irradiance in the wavelength range between 300 nm and 400 nm. The spectral irradiance stability of the UV-LED-based light source observed in the laboratory after seasoning (burning-in) the individual LEDs was better than 0.3% over a 12 h period of continuous operation. The integral irradiance measurements of the source over a period of several months, where the UV-LED source was not operated continuously between the measurements, showed stability within 0.3%. In-field measurements of the source with an array spectroradiometer indicated the stability of the source to be within the standard uncertainty of the spectroradiometer calibration, which was within 1% to 2%.

Cost-effectiveness of a disease management programme for secondary prevention of coronary heart disease and heart failure in primary care.

PubMed

Turner, D A; Paul, S; Stone, M A; Juarez-Garcia, A; Squire, I; Khunti, K

2008-12-01

To determine if a disease management programme for patients with coronary heart disease and heart failure represents an efficient use of health services resources. We carried out an economic evaluation alongside a cluster randomised control trial of 1163 patients with coronary heart disease and chronic heart failure in 20 primary care practices in the United Kingdom. Practices were randomised to either a control group, where patients received standard general practice care, or an intervention group where patients had access to a specialist nurse-led disease management programme. We estimated costs in both groups for coronary heart disease-related resource use. The main outcome measure used in the economic evaluation was quality adjusted life years (QALY) measured using the EuroQol. The disease management programme was associated with an increase in the QALY measured of 0.03 per year and an increase in the total NHS costs of 425 pounds (540 euros), of this only 83 pounds was directly associated with the provision of the nurse clinics. The clinics generated additional QALY at an incremental cost of 13 pounds 158 per QALY compared to the control group. The use of a nurse-led disease management programme is associated with increased costs in other coronary heart disease-related services as well as for the costs of the clinics. They are also associated with improvements in health. Even in the short term these disease management programmes may represent a cost-effective service, as additional QALY are generated at an acceptable extra cost.

The effect of peer-led education on the life quality of mastectomy patients referred to breast cancer-clinics in Shiraz, Iran 2009.

PubMed

Sharif, Farkhondeh; Abshorshori, Narjes; Tahmasebi, Sedigheh; Hazrati, Maryam; Zare, Najaf; Masoumi, Sarah

2010-07-23

Breast cancer among women is a relatively common with a more favorable expected survival rates than other forms of cancers. This study aimed to determine the improved quality of life for post-mastectomy women through peer education. Using pre and post test follow up and control design approach, 99 women with stage I and II of breast cancer diagnosis were followed one year after modified radical mastectomy. To measure the quality of life an instrument designed by the European organization for research and treatment of cancer, known as the Quality of Life Question (QLQ-30) and its breast cancer supplementary measure (QLQ-BR23) at three points in time (before, immediately and two months after intervention) for both groups were used. The participant selection was a convenient sampling method and women were randomly assigned into two experimental and control groups. The experimental group was randomly assigned to five groups and peer educators conducted weekly educational programs for one month. Tabulated data were analyzed using chi square, t test, and repeated measurement multivariate to compare the quality of life differences over time. For the experimental group, the results showed statistically significant improvement in all performance aspects of life quality and symptom reduction (P < 0.001), while the control group had no significant differences in all aspects of life quality. The findings of this study suggest that peer led education is a useful intervention for post-mastectomy women to improve their quality of life.

Relaxation Training and Written Emotional Disclosure for Tension or Migraine Headaches: A Randomized, Controlled Trial

PubMed Central

D’Souza, Pamela J.; Lumley, Mark A.; Kraft, Christina A.; Dooley, John A.

2010-01-01

Background and Purpose Behavioral medicine interventions that directly reduce arousal and negative emotions, such as relaxation training (RT), are conceptually different from interventions that temporarily increase negative emotions, such as written emotional disclosure (WED), but no studies have directly compared their efficacy. We compared the effects of RT and WED on people with tension or migraine headaches. Methods College students with either tension (n = 51) or migraine (n = 90) headaches were randomized to 1 of 3 groups: RT, WED, or a neutral writing control condition; 4 sessions were held over 2 weeks. Mood was measured before and after each session, and outcomes (headache frequency, severity, disability, and general physical symptoms) were assessed at baseline and at 1-month and 3-month follow-ups. Results As expected, RT led to an immediate increase in calmness, whereas WED led to an immediate increase in negative mood, for both headache samples. Intent-to-treat analyses showed that for the tension headache sample, RT led to improved headache frequency and disability compared to both WED and the control group, but WED had no effect. For migraine headaches, RT improved pain severity relative to the control group, but WED again had no effect. Conclusions A brief RT protocol was effective for tension headaches, but WED had no effect on health status for either tension or migraine headaches. Modifications to WED, such as targeting people with unresolved stress, providing guidance to enhance the potency of the writing, or including additional at-home writing and exposure exercises, may improve its efficacy for people with headaches and other health problems. PMID:18696172

Promoting gross motor skills and physical activity in childcare: A translational randomized controlled trial.

PubMed

Jones, Rachel A; Okely, Anthony D; Hinkley, Trina; Batterham, Marijka; Burke, Claire

2016-09-01

Educator-led programs for physical activity and motor skill development show potential but few have been implemented and evaluated using a randomized controlled design. Furthermore, few educator-led programs have evaluated both gross motor skills and physical activity. Therefore, the aim of this study was to evaluate a gross motor skill and physical activity program for preschool children which was facilitated solely by childcare educators. A six-month 2-arm randomized controlled trial was implemented between April and September 2012 in four early childhood centers in Tasmania, Australia. Educators participated in ongoing professional development sessions and children participated in structured physical activity lessons and unstructured physical activity sessions. In total, 150 children were recruited from four centers which were randomized to intervention or wait-list control group. Six early childhood educators from the intervention centers were trained to deliver the intervention. Gross motor skills were assessed using the Test of Gross Motor Development (2nd edition) and physical activity was measured objectively using GT3X+ Actigraph accelerometers. No statistically significant differences were identified. However, small to medium effect sizes, in favor of the intervention group, were evident for four of the five gross motor skills and the total gross motor skill score and small to medium effect sizes were reported for all physical activity outcomes. This study highlights the potential of educator-led physical activity interventions and supports the need for further translational trials within the early childhood sector. Copyright © 2015 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

A transparent look at the measurement and application of colour rendering in the use of LED light sources

NASA Astrophysics Data System (ADS)

Leuschner, F. W.; Van Der Westhuyzen, J. G. J.

2014-06-01

The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

Self-control, future orientation, smoking, and the impact of Dutch tobacco control measures.

PubMed

Daly, Michael; Delaney, Liam; Baumeister, Roy F

2015-06-01

The pronounced discrepancy between smokers' intentions to quit and their smoking behavior has led researchers to suggest that many smokers are time inconsistent, have self-control problems, and may benefit from external efforts to constrain their consumption. This study aims to test whether self-control and future orientation predict smoking levels and to identify if these traits modify how cigarette consumption responds to the introduction of tobacco control measures. A sample of Dutch adults (N = 1585) completed a measure of self-control and the Consideration of Future Consequences Scale (CFCS) in 2001 and indicated their tobacco consumption each year from 2001 to 2007. In 2004, a workplace smoking ban and substantial tax increase on tobacco was introduced in the Netherlands. To identify the potential impact of these tobacco control measures we examined whether participants smoked or were heavy smokers (20 + cigarettes per day) each year from 2001 to 2007. Participants with high self-control and CFCS scores showed lower rates of smoking across the seven year period of the study. The 2004 smoking restrictions were linked with a subsequent decline in heavy smoking. This decline was moderated by self-control levels. Those with low self-control showed a large reduction in heavy smoking whereas those with high self-control did not. The effects were, however, temporary: many people with low self-control resumed heavy smoking 2-3 years after the introduction of the tobacco restrictions. The immediate costs which national tobacco control measures impose on smokers may assist smokers with poor self-control in reducing their cigarette consumption.

Toward eradication: the effect of Mycobacterium bovis infection in wildlife on the evolution and future direction of bovine tuberculosis management in New Zealand

PubMed Central

Livingstone, PG; Hancox, N; Nugent, G; de Lisle, GW

2015-01-01

Abstract New Zealand's bovine tuberculosis (TB) control programme has greatly reduced the burden of tuberculosis on the farming industry, from 11% of mature cattle found with TB at slaughter in 1905 to <0.003% in 2012/13. New Zealand implemented TB control measures in cattle from the mid-twentieth century, and later in farmed deer. Control was based on established methods of tuberculin testing of herds, slaughter of suspect cases, and livestock movement control. Unexplained regional control failures and serious disease outbreaks were eventually linked to wildlife-vectored infection from the introduced Australian brushtail possum (Trichosurus vulpecula), which also triggered a wildlife disease complex involving a range of introduced species. This paper reviews the progressive elucidation of the epidemiology of Mycobacterium bovis in New Zealand's wildlife and farmed livestock, and the parallel development of research-led, multi-faceted TB control strategies required to protect New Zealand's livestock industries from damaging infection levels. The adoption of coordinated national pest management strategies, with increasingly ambitious objectives agreed between government and industry funders, has driven a costly but very successful management regime targeted at controlling TB in the possum maintenance host. This success has led to initiation of a strategy designed to eradicate TB from New Zealand's livestock and wildlife, which is considered a realistic long-term prospect. PMID:25273888

Toward eradication: the effect of Mycobacterium bovis infection in wildlife on the evolution and future direction of bovine tuberculosis management in New Zealand.

PubMed

Livingstone, P G; Hancox, N; Nugent, G; de Lisle, G W

2015-06-01

New Zealand's bovine tuberculosis (TB) control programme has greatly reduced the burden of tuberculosis on the farming industry, from 11% of mature cattle found with TB at slaughter in 1905 to <0.003% in 2012/13. New Zealand implemented TB control measures in cattle from the mid-twentieth century, and later in farmed deer. Control was based on established methods of tuberculin testing of herds, slaughter of suspect cases, and livestock movement control. Unexplained regional control failures and serious disease outbreaks were eventually linked to wildlife-vectored infection from the introduced Australian brushtail possum (Trichosurus vulpecula), which also triggered a wildlife disease complex involving a range of introduced species. This paper reviews the progressive elucidation of the epidemiology of Mycobacterium bovis in New Zealand's wildlife and farmed livestock, and the parallel development of research-led, multi-faceted TB control strategies required to protect New Zealand's livestock industries from damaging infection levels. The adoption of coordinated national pest management strategies, with increasingly ambitious objectives agreed between government and industry funders, has driven a costly but very successful management regime targeted at controlling TB in the possum maintenance host. This success has led to initiation of a strategy designed to eradicate TB from New Zealand's livestock and wildlife, which is considered a realistic long-term prospect.

Dimming LEDs with Phase-Cut Dimmers. The Specifier's Process for Maximizing Success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, N. J.; Poplawski, M. E.

2013-10-01

DOE GATEWAY program report reviewing how phase-cut dimmers work, how LEDs differ from the incandescent lamps these dimmers were originally designed to control, and how those differences can lead to complications when attempting to dim LEDs. Providing both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects—as well as real-world examples of how to use those procedures—the report aims to reduce the chance of experiencing compatibility-related problems and, if possible, ensure good dimming performance.

RGB LED with smart control in the backlight and lighting

NASA Astrophysics Data System (ADS)

Ku, Johnson C. S.; Lee, C. J.

2008-02-01

To improve the LED (Light Emitting Diode) efficacy is the major consideration when the backlight and lighting system are implemented. An important source of poor efficacy come from the chip process or heat dissipation. White LED used blue chip with phosphor is the current solution and inadequate for the tunable color temperature system. The use of RGB (Red, Green and Blue) LED with smart control is presented in this study. The resulting coupled optical and thermal shows the better performance when it is synthesized in conjunction with a degree of color mixing technology.

Neural nets for aligning optical components in harsh environments: Beam smoothing spatial filter as an example

NASA Technical Reports Server (NTRS)

Decker, Arthur J.; Krasowski, Michael J.

1991-01-01

The goal is to develop an approach to automating the alignment and adjustment of optical measurement, visualization, inspection, and control systems. Classical controls, expert systems, and neural networks are three approaches to automating the alignment of an optical system. Neural networks were chosen for this project and the judgements that led to this decision are presented. Neural networks were used to automate the alignment of the ubiquitous laser-beam-smoothing spatial filter. The results and future plans of the project are presented.

Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs.

PubMed

Kumar, Baskaran Ganesh; Sadeghi, Sadra; Melikov, Rustamzhon; Aria, Mohammad Mohammadi; Jalali, Houman Bahmani; Ow-Yang, Cleva W; Nizamoglu, Sedat

2018-08-24

Herein, we demonstrate that the structural and optical control of InP-based quantum dots (QDs) can lead to high-performance light-emitting diodes (LEDs). Zinc sulphide (ZnS) shells passivate the InP QD core and increase the quantum yield in green-emitting QDs by 13-fold and red-emitting QDs by 8-fold. The optimised QDs are integrated in the liquid state to eliminate aggregation-induced emission quenching and we fabricated white LEDs with a warm, neutral and cool-white appearance by the down-conversion mechanism. The QD-functionalized white LEDs achieve luminous efficiency (LE) up to 14.7 lm W -1 and colour-rendering index up to 80. The structural and optical control of InP/ZnS core/shell QDs enable 23-fold enhancement in LE of white LEDs compared to ones containing only QDs of InP core.

Anti-inflammatory effect of low-level laser and light-emitting diode in zymosan-induced arthritis.

PubMed

de Morais, Núbia Cristina Rodrigues; Barbosa, Ana Maria; Vale, Mariana Lima; Villaverde, Antonio Balbin; de Lima, Carlos José; Cogo, José Carlos; Zamuner, Stella Regina

2010-04-01

The aim of this work was to investigate the effect of low-level laser therapy (LLLT) and light-emitting diode (LED) on formation of edema, increase in vascular permeability, and articular joint hyperalgesia in zymosan-induced arthritis. It has been suggested that low-level laser and LED irradiation can modulate inflammatory processes. Arthritis was induced in male Wistar rats (250-280 g) by intra-articular injection of zymosan (1 mg in 50 microL of a sterile saline solution) into one rear knee joint. Animals were irradiated immediately, 1 h, and 2 h after zymosan administration with a semiconductor laser (685 nm and 830 nm) and an LED at 628 nm, with the same dose (2.5 J/cm(2)) for laser and LED. In the positive control group, animals were injected with the anti-inflammatory drug dexamethasone 1 h prior to the zymosan administration. Edema was measured by the wet/dry weight difference of the articular tissue, the increase in vascular permeability was assessed by the extravasation of Evans blue dye, and joint hyperalgesia was measured using the rat knee-joint articular incapacitation test. Irradiation with 685 nm and 830 nm laser wavelengths significantly inhibited edema formation, vascular permeability, and hyperalgesia. Laser irradiation, averaged over the two wavelengths, reduced the vascular permeability by 24%, edema formation by 23%, and articular incapacitation by 59%. Treatment with LED (628 nm), with the same fluence as the laser, had no effect in zymosan-induced arthritis. LLLT reduces inflammatory signs more effectively than LED irradiation with similar irradiation times (100 sec), average outputs (20 mW), and energy doses (2 J) in an animal model of zymosan-induced arthritis. The anti-inflammatory effects of LLLT appear to be a class effect, which is not wavelength specific in the red and infrared parts of the optical spectrum.

Growth and photomorphogenesis of pepper plants under red light-emitting diodes with supplemental blue or far-red lighting

NASA Technical Reports Server (NTRS)

Brown, C. S.; Schuerger, A. C.; Sager, J. C.

1995-01-01

Light-emitting diodes (LEDs) are a potential irradiation source for intensive plant culture systems and photobiological research. They have small size, low mass, a long functional life, and narrow spectral output. In this study, we measured the growth and dry matter partitioning of 'Hungarian Wax' pepper (Capsicum annuum L.) plants grown under red LEDs compared with similar plants grown under red LEDs with supplemental blue or far-red radiation or under broad spectrum metal halide (MH) lamps. Additionally, we describe the thermal and spectral characteristics of these sources. The LEDs used in this study had a narrow bandwidth at half peak height (25 nm) and a focused maximum spectral output at 660 nm for the red and 735 nm for the far-red. Near infrared radiation (800 to 3000 nm) was below detection and thermal infrared radiation (3000 to 50,000 nm) was lower in the LEDs compared to the MH source. Although the red to far-red ratio varied considerably, the calculated phytochrome photostationary state (phi) was only slightly different between the radiation sources. Plant biomass was reduced when peppers were grown under red LEDs in the absence of blue wavelengths compared to plants grown under supplemental blue fluorescent lamps or MH lamps. The addition of far-red radiation resulted in taller plants with greater stem mass than red LEDs alone. There were fewer leaves under red or red plus far-red radiation than with lamps producing blue wavelengths. These results indicate that red LEDs may be suitable, in proper combination with other wavelengths of light, for the culture of plants in tightly controlled environments such as space-based plant culture systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebert, Jon Llyod

This Small Business Innovative Research (SBIR) Phase I project will demonstrate the feasibility of an innovative temperature control technology for Metal-Organic Chemical Vapor Deposition (MOCVD) process used in the fabrication of Multi-Quantum Well (MQW) LEDs. The proposed control technology has the strong potential to improve both throughput and performance quality of the manufactured LED. The color of the light emitted by an LED is a strong function of the substrate temperature during the deposition process. Hence, accurate temperature control of the MOCVD process is essential for ensuring that the LED performance matches the design specification. The Gallium Nitride (GaN) epitaxymore » process involves depositing multiple layers at different temperatures. Much of the recipe time is spent ramping from one process temperature to another, adding significant overhead to the production time. To increase throughput, the process temperature must transition over a range of several hundred degrees Centigrade many times with as little overshoot and undershoot as possible, in the face of several sources of process disturbance such as changing emissivities. Any throughput increase achieved by faster ramping must also satisfy the constraint of strict temperature uniformity across the carrier so that yield is not affected. SC Solutions is a leading supplier of embedded real-time temperature control technology for MOCVD systems used in LED manufacturing. SC’s Multiple Input Multiple Output (MIMO) temperature controllers use physics-based models to achieve the performance demanded by our customers. However, to meet DOE’s ambitious goals of cost reduction of LED products, a new generation of temperature controllers has to be developed. SC believes that the proposed control technology will be made feasible by the confluence of mathematical formulation as a convex optimization problem, new efficient and scalable algorithms, and the increase in computational power available for real-time control.« less

Enhanced Phycocyanin Production from Spirulina platensis using Light Emitting Diode

NASA Astrophysics Data System (ADS)

Bachchhav, Manisha Bhanudas; Kulkarni, Mohan Vinayak; Ingale, Arun G.

2017-06-01

This work investigates the performance of different cultivation conditions using Light Emitting Diode (LED) as a light source for the production of phycocyanin from Spirulina platensis. With LEDs under autotrophic conditions, red LED produced maximum amount of biomass (8.95 g/l). As compared to autotrophic cultivation with fluorescent lamp (control), cultivations using LEDs under autotrophic and mixotrophic mode significantly enhanced the phycocyanin content. For autotrophic conditions (with LED) phycocyanin content was in the range of 103-242 mg/g of dry biomass, whereas for mixotrophic conditions (0.1% glucose and LED) it was in the range of 254-380 mg/g of dry biomass. Spirulina cultivated with yellow LED under mixotrophic conditions had 5.4-fold more phycocyanin (380 mg/g of dry biomass) than control (70 mg/g of dry biomass). The present study demonstrates that the LEDs under mixotrophic conditions gave sixfold (2497 mg/l) higher yields of phycocyanin as compared to autotrophic condition under white light (415 mg/l).

A Simple Photometer to Study Skylight

ERIC Educational Resources Information Center

McIntosh Gordon

2006-01-01

A simple photometer constructed from an LED and an op amp can be used to measure light in a number of physical situations. A variety of LEDs exist to investigate different wavelength ranges. Combined with an inexpensive transit, the LED photometer can be used to carry out skylight studies and atmospheric optical depth measurements. The activities…

Relationships between junction temperature, electroluminescence spectrum and ageing of light-emitting diodes

NASA Astrophysics Data System (ADS)

Vaskuri, Anna; Kärhä, Petri; Baumgartner, Hans; Kantamaa, Olli; Pulli, Tomi; Poikonen, Tuomas; Ikonen, Erkki

2018-04-01

We have developed spectral models describing the electroluminescence spectra of AlGaInP and InGaN light-emitting diodes (LEDs) consisting of the Maxwell-Boltzmann distribution and the effective joint density of states. One spectrum at a known temperature for one LED specimen is needed for calibrating the model parameters of each LED type. Then, the model can be used for determining the junction temperature optically from the spectral measurement, because the junction temperature is one of the free parameters. We validated the models using, in total, 53 spectra of three red AlGaInP LED specimens and 72 spectra of three blue InGaN LED specimens measured at various current levels and temperatures between 303 K and 398 K. For all the spectra of red LEDs, the standard deviation between the modelled and measured junction temperatures was only 2.4 K. InGaN LEDs have a more complex effective joint density of states. For the blue LEDs, the corresponding standard deviation was 11.2 K, but it decreased to 3.5 K when each LED specimen was calibrated separately. The method of determining junction temperature was further tested on white InGaN LEDs with luminophore coating and LED lamps. The average standard deviation was 8 K for white InGaN LED types. We have six years of ageing data available for a set of LED lamps and we estimated the junction temperatures of these lamps with respect to their ageing times. It was found that the LEDs operating at higher junction temperatures were frequently more damaged.

Significant reduction in energy for plant-growth lighting in space using targeted LED lighting and spectral manipulation

NASA Astrophysics Data System (ADS)

Poulet, L.; Massa, G. D.; Morrow, R. C.; Bourget, C. M.; Wheeler, R. M.; Mitchell, C. A.

2014-07-01

Bioregenerative life-support systems involving photoautotrophic organisms will be necessary to sustain long-duration crewed missions at distant space destinations. Since sufficient sunlight will not always be available for plant growth at many space destinations, efficient electric-lighting solutions are greatly needed. The present study demonstrated that targeted plant lighting with light-emitting diodes (LEDs) and optimizing spectral parameters for close-canopy overhead LED lighting allowed the model crop leaf lettuce (Lactuca sativa L. cv. 'Waldmann's Green') to be grown using significantly less electrical energy than using traditional electric-lighting sources. Lettuce stands were grown hydroponically in a growth chamber controlling temperature, relative humidity, and CO2 level. Several red:blue ratios were tested for growth rate during the lag phase of lettuce growth. In addition, start of the exponential growth phase was evaluated. Following establishment of a 95% red + 5% blue spectral balance giving the best growth response, the energy efficiency of a targeted lighting system was compared with that of two total coverage (untargeted) LED lighting systems throughout a crop-production cycle, one using the same proportion of red and blue LEDs and the other using white LEDs. At the end of each cropping cycle, whole-plant fresh and dry mass and leaf area were measured and correlated with the amount of electrical energy (kWh) consumed for crop lighting. Lettuce crops grown with targeted red + blue LED lighting used 50% less energy per unit dry biomass accumulated, and the total coverage white LEDs used 32% less energy per unit dry biomass accumulated than did the total coverage red + blue LEDs. An energy-conversion efficiency of less than 1 kWh/g dry biomass is possible using targeted close-canopy LED lighting with spectral optimization. This project was supported by NASA grant NNX09AL99G.

Photobiomodulation in human muscle tissue: an advantage in sports performance?

PubMed Central

Ferraresi, Cleber; Huang, Ying-Ying; Hamblin, Michael R.

2016-01-01

Photobiomodulation (PBM) describes the use of red or near-infrared (NIR) light to vstimulate, heal, and regenerate damaged tissue. Both pre-conditioning (light delivered to muscles before exercise) and PBM applied after exercise can increase sports performance in athletes. This review covers the effects of PBM on human muscle tissue in clinical trials in volunteers related to sports performance and in athletes. The parameters used were categorized into those with positive effects or no effects on muscle performance and recovery. Randomized controlled trials and case-control studies in both healthy trained and untrained participants, and elite athletes were retrieved from MEDLINE up to 2016. Performance metrics included fatigue, number of repetitions, torque, hypertrophy; measures of muscle damage and recovery such as creatine kinase and delayed onset muscle soreness. Searches retrieved 533 studies, of which 46 were included in the review (n=1045 participants). Studies used single laser probes, cluster of laser-diodes, LED-clusters, mixed clusters (lasers and LEDs), and flexible LED arrays. Both red, NIR, and red/NIR mixtures were used. PBM can increase muscle mass gained after training, and decrease inflammation and oxidative stress in muscle biopsies. We raise the question of whether PBM should be permitted in athletic competition by international regulatory authorities. PMID:27874264

Legislation for smoking control in Western Australia.

PubMed Central

Musk, A W; Shean, R; Woodward, S

1985-01-01

This historical analysis of public issues relating to smoking control in Western Australia examines relevant Western Australian state and Australian federal laws, their introduction, and their consequences. Public and political support and opinion led by the health professions resulted in two attempts to legislate against all forms of cigarette advertising in 1982 and 1983. Both attempts failed, and public support for such measures has been seen to be affected by the campaigns mounted in opposition by the tobacco and advertising industries. Other smoking control measures which have been successfully introduced in 1983 and 1984 are higher tobacco taxes and a comprehensive coordinated public education and information programme. The activities associated with the legislative initiatives resulted in a greatly increased level of community awareness of the dangers of smoking and acceptance of the need for some action on this major health problem. PMID:3924165

Evaluation of the Potential Optical Radiation Hazards with Led Lamps Intended for Home Use.

PubMed

James, Robert H; Landry, Robert J; Walker, Bennett N; Ilev, Ilko K

2017-01-01

The authors evaluated the potential for ocular damage from optical radiation emitted by Light Emitting Diode (LED) based lamps used for general illumination. Ten LED lamps were randomly selected off the shelf from a local home improvement store. The LEDs were behind diffusers in half of these lamps, while in the other half, the LEDs were clearly visible. In addition, a battery powered LED lantern having a LED source behind a diffuser was measured. The optical radiation emissions from two common incandescent lamps were also measured to compare the relative hazards of LED and incandescent lamps. All lamp samples were evaluated in accordance with procedures specified in the American National Standards Institute/Illuminating Engineering Society of North America (ANSI/IESNA) Standard RP-27.3. For comparison purposes, the lantern and 100 W incandescent lamps were also evaluated according to ANSI RP-27.1. These measurements indicate that no lamp evaluated poses any photobiological hazard, and therefore, all lamps fall in the RP-27.3 category of Exempt Group. However, when evaluated in accordance with RP-27.1, the 100 W incandescent lamp would be classified in Risk Group 1 (low risk), while the LED lantern would be classified in Risk Group 2 (moderate risk).

Effects of light-emitting diode supplementary lighting on the winter growth of greenhouse plants in the Yangtze River Delta of China.

PubMed

Li, Xue; Lu, Wei; Hu, Guyue; Wang, Xiao Chan; Zhang, Yu; Sun, Guo Xiang; Fang, Zhichao

2016-12-01

The winter in the Yangtze River Delta area of China involves more than 1 month of continuous low temperature and poor light (CLTL) weather conditions, which impacts horticultural production in an unheated greenhouse; however, few greenhouses in this area are currently equipped with a heating device. The low-cost and long-living light-emitting diode (LED) was used as an artificial light source to explore the effects of supplementary lighting during the dark period in CLTL winter on the vegetative characteristics, early yield, and physiology of flowering for pepper plants grown in a greenhouse without heating. Two LED lighting sets were employed with different light source to provide 65 μmol m -2  s -1 at night: (1) LED-A: red LEDs (R, peak wavelength 660 nm) and blue LEDs (B, peak wavelength 460 nm) with an R:B ratio of 6:3; and (2) LED-B: R and B LEDs at an R:B ratio of 8:1. Plants growth parameters and chlorophyll fluorescence characteristics were compared between lighting treatments and the control group. Plants' yield and photosynthesis ability were improved by LED-A. Pepper grown under the LED-A1 strategy showed a 303.3 % greater fresh weight of fruits and a 501.3 % greater dry mass compared with the control group. Plant leaves under LED-A1 showed maximum efficiency of the light quantum yield of PSII, electron transfer rate, and the proportion of the open fraction of PSII centers, with values 113.70, 114.34, and 211.65 % higher than those of the control group, respectively, and showed the lowest rate constant of thermal energy dissipation of all groups. LED-B was beneficial to the plant height and stems diameter of the pepper plants more than LED-A. These results can serve as a guide for environment control and for realizing low energy consumption for products grown in a greenhouse in the winter in Southern China.

Microprocessor controlled portable TLD system

NASA Technical Reports Server (NTRS)

Apathy, I.; Deme, S.; Feher, I.

1996-01-01

An up-to-date microprocessor controlled thermoluminescence dosemeter (TLD) system for environmental and space dose measurements has been developed. The earlier version of the portable TLD system, Pille, was successfully used on Soviet orbital stations as well as on the US Space Shuttle, and for environmental monitoring. The new portable TLD system, Pille'95, consists of a reader and TL bulb dosemeters, and each dosemeter is provided with an EEPROM chip for automatic identification. The glow curve data are digitised and analysed by the program of the reader. The measured data and the identification number appear on the LED display of the reader. Up to several thousand measured data together with the glow curves can be stored on a removable flash memory card. The whole system is supplied either from built-in rechargeable batteries or from the mains of the space station.

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments.

PubMed

Bras, Wim; Koizumi, Satoshi; Terrill, Nicholas J

2014-11-01

Small- and wide-angle X-ray scattering (SAXS, WAXS) are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments.

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments

PubMed Central

Bras, Wim; Koizumi, Satoshi; Terrill, Nicholas J

2014-01-01

Small- and wide-angle X-ray scattering (SAXS, WAXS) are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments. PMID:25485128

Data Acquisition Systems

NASA Technical Reports Server (NTRS)

1994-01-01

In the mid-1980s, Kinetic Systems and Langley Research Center determined that high speed CAMAC (Computer Automated Measurement and Control) data acquisition systems could significantly improve Langley's ARTS (Advanced Real Time Simulation) system. The ARTS system supports flight simulation R&D, and the CAMAC equipment allowed 32 high performance simulators to be controlled by centrally located host computers. This technology broadened Kinetic Systems' capabilities and led to several commercial applications. One of them is General Atomics' fusion research program. Kinetic Systems equipment allows tokamak data to be acquired four to 15 times more rapidly. Ford Motor company uses the same technology to control and monitor transmission testing facilities.

Book Review: The end of time: the next revolution in our understanding of the universe. Julian Barbour, Weidenfeld and Nicholson, London, 384 pp., 16.95, ISBN 0195145925

NASA Astrophysics Data System (ADS)

Ellis, G. F. R.

In the early part of this century, physicists, led notably by Albert Einstein and the pioneers of quantum theory-in particular Neils Bohr, Werner Heisenberg, and Paul Dirac-discovered that the underlying nature of physical reality is stranger than anyone had ever imagined. A series of brilliant insights led to the realisation, on the one hand, of the relative nature of space and time measurements, and hence of our basic concepts of space and time (ultimately leading to the discovery of nuclear energy), and on the other hand, of the quantum nature of matter, with its associated quantum statistics and uncertainty of prediction (leading to transistors and lasers). Combining these views ultimately led to a realisation of the necessity of the existence of anti-matter, and of the dynamic nature of the vacuum. Further developments led to an understanding of the existence of symmetries characterising the various families of elementary particles, and of the unified nature of the fundamental interactions when described as gauge theories with forces mediated by exchange of gauge bosons. These properties have all been confirmed by carefully controlled experiments.

Study on the structural, optical, and electrical properties of the yellow light-emitting diode grown on free-standing (0001) GaN substrate

NASA Astrophysics Data System (ADS)

Deng, Gaoqiang; Zhang, Yuantao; Yu, Ye; Yan, Long; Li, Pengchong; Han, Xu; Chen, Liang; Zhao, Degang; Du, Guotong

2018-04-01

In this paper, GaN-based yellow light-emitting diodes (LEDs) were homoepitaxially grown on free-standing (0001) GaN substrates by metal-organic chemical vapor deposition. X-ray diffraction (XRD), photoluminescence (PL), and electroluminescence (EL) measurements were conducted to investigate the structural, optical, and electrical properties of the yellow LED. The XRD measurement results showed that the InGaN/GaN multiple quantum wells (MQWs) in the LED structure have good periodicity because the distinct MQWs related higher order satellite peaks can be clearly observed from the profile of 2θ-ω XRD scan. The low temperature (10 K) and room temperature PL measurement results yield an internal quantum efficiency of 16% for the yellow LED. The EL spectra of the yellow LED present well Gaussian distribution with relatively low linewidth (47-55 nm), indicating the homogeneous In-content in the InGaN quantum well layers in the yellow LED structure. It is believed that this work will aid in the future development of GaN on GaN LEDs with long emission wavelength.

Peer Led Team Learning in Introductory Biology: Effects on Peer Leader Critical Thinking Skills

PubMed Central

Snyder, Julia J.; Wiles, Jason R.

2015-01-01

This study evaluated hypothesized effects of the Peer-Led Team Learning (PLTL) instructional model on undergraduate peer leaders’ critical thinking skills. This investigation also explored peer leaders’ perceptions of their critical thinking skills. A quasi-experimental pre-test/post-test with control group design was used to determine critical thinking gains in PLTL/non-PLTL groups. Critical thinking was assessed using the California Critical Thinking Skills Test (CCTST) among participants who had previously completed and been successful in a mixed-majors introductory biology course at a large, private research university in the American Northeast. Qualitative data from open-ended questionnaires confirmed that factors thought to improve critical thinking skills such as interaction with peers, problem solving, and discussion were perceived by participants to have an impact on critical thinking gains. However, no significant quantitative differences in peer leaders’ critical thinking skills were found between pre- and post-experience CCTST measurements or between experimental and control groups. PMID:25629311

Practice and play as determinants of self-determined motivation in youth soccer players.

PubMed

Hendry, David T; Crocker, Peter R E; Hodges, Nicola J

2014-01-01

Based upon predictions derived from the Developmental Model of Sports Participation, we tested whether hours in domain-specific play (self-led activities) and practice (coach-led activities) during childhood (~5-12 year) in an elite group of youth soccer players from the UK (N = 144) were related to motivation. Independent analysis of three different age groups (Under 13, 15 and 17 year) did not show relations between play and practice activities during childhood and global measures of motivation. However, secondary analysis showed that when controlling for years in soccer, years in the UK Academy system were negatively related to global indices of self-determined motivation (SDI) and positively related to controlled motivation for the oldest players. Despite predictions, there was no evidence that play during childhood was positively related to more SDI. Prospective research is recommended to enable more robust conclusions about the role of early developmental practice activities, especially early specialisation in a high-performance system, on both skill and psychosocial development.

Peer led team learning in introductory biology: effects on peer leader critical thinking skills.

PubMed

Snyder, Julia J; Wiles, Jason R

2015-01-01

This study evaluated hypothesized effects of the Peer-Led Team Learning (PLTL) instructional model on undergraduate peer leaders' critical thinking skills. This investigation also explored peer leaders' perceptions of their critical thinking skills. A quasi-experimental pre-test/post-test with control group design was used to determine critical thinking gains in PLTL/non-PLTL groups. Critical thinking was assessed using the California Critical Thinking Skills Test (CCTST) among participants who had previously completed and been successful in a mixed-majors introductory biology course at a large, private research university in the American Northeast. Qualitative data from open-ended questionnaires confirmed that factors thought to improve critical thinking skills such as interaction with peers, problem solving, and discussion were perceived by participants to have an impact on critical thinking gains. However, no significant quantitative differences in peer leaders' critical thinking skills were found between pre- and post-experience CCTST measurements or between experimental and control groups.

Non-Ideal Properties of Gallium Nitride Based Light-Emitting Diodes

NASA Astrophysics Data System (ADS)

Shan, Qifeng

The spectacular development of gallium nitride (GaN) based light-emitting diodes (LEDs) in recent years foreshadows a new era for lighting. There are still several non-ideal properties of GaN based LEDs that hinder their widespread applications. This dissertation studies these non-ideal properties including the large reverse leakage current, large subthreshold forward leakage current, an undesired parasitic cyan luminescence and high-concentration deep levels in GaInN blue LEDs. This dissertation also studies the thermal properties of GaInN LEDs. Chapter 1 gives a brief introduction of non-ideal properties of GaN based LEDs. The leakage current of GaN based LEDs, defects in epitaxially grown GaN devices, and doping problems of p-type GaN materials are discussed. The transient junction temperature measurement technique for GaN based LEDs is introduced. The leakage current of an LED includes the subthreshold forward leakage current and the reverse leakage current. The leakage current of GaN based LEDs affects the reliability, electrostatic discharge resilience, and sub-threshold power consumption. In Chapter 2, the reverse leakage current of a GaInN LED is analyzed by temperaturedependent current-voltage measurements. At low temperature, the reverse leakage current is attributed to the variable-range-hopping conduction. At high temperature, the reverse leakage current is attributed to a thermally-assisted multi-step tunneling. The thermal activation energies (95 meV ~ 162 meV), extracted from the Arrhenius plot for the reverse current in the high-temperature range, indicate a thermally activated tunneling process. Additional room-temperature capacitance-voltage (C-V) measurements are performed to obtain information on the depletion width and doping concentration of the LED. The average internal electric field is estimated by the C-V measurements. The strong internal electric field enhances the thermal emission of electrons in the thermally-assisted multi-step tunneling process. Another problem of GaInN blue LEDs is the undesired parasitic cyan emission band. The undesired parasitic emission band strongly influence the electrical and optical properties of GaInN blue LEDs including the subthreshold forward leakage current and the color purity of the emission. In Chapter 3 , GaInN blue LEDs emitting at 445 nm with a parasitic cyan (blue-green) emission band (480 nm), which dominates the emission spectrum at low injection current, are analyzed. Photoluminescence using resonant optical excitation shows that the cyan emission originates from the active region of the LED. The current- and excitation-density-dependent blue-to-cyan intensity ratio reveals that the cyan emission is due to a transition from the conduction band to a Mg acceptor having diffused into the last-grown quantum well of the active region. The Mg in the active region provides an additional carrier-transport path, and therefore can explain the high subthreshold forward leakage current that is measured in these LEDs. Deep levels in GaN-based materials strongly affect the electrical and optical properties of GaN-based LEDs. Chapter 4 describes the basic principle and the setup of a deep-level transient spectroscopy (DLTS) measurement system. This DLTS system is used to determine the concentration and thermal activation energy of deep levels in the depletion region of the GaInN LED. Two types of hole traps in the n-type side of the depletion region are observed in the DLTS measurement. The thermal activation energies of these two types of hole traps are compared with the results reported in literature. The hole trap associated with the major DLTS peak with a thermal activation energy of 0.80 eV is presumably related to the “yellow luminescence band”. Self-heating of LEDs is an important issue that affects the efficiency and reliability. In Chapter 5, the thermal properties, including thermal time constants, of GaN LEDs are analyzed. The transient-junction-temperature behavior of unpackaged LED chips is described by a single time constant, which is the product of a thermal resistance Rth and a thermal capacitance Cth. Furthermore, a multistage RthCth thermal model for packaged LEDs is developed. The transient response of the junction temperature of LEDs after the power is switched on or switched off can be described by a multi-exponential function. Each time constant of this function is approximately the product of a thermal resistance, Rth, and a thermal capacitance, Cth. The transient junction temperature after the power is switched off is measured for a high-power flip-chip LED by the forward-voltage method. A two-stage RthCth model is used to analyze the thermal properties of the packaged LED. Two time constants, 2.72 ms and 18.7 ms are extracted from the junction temperature decay measurement and attributed to the thermal time constant of the LED GaN / sapphire chip and LED Si submount, respectively.

Controllable light beam shaper in LED lamp

NASA Astrophysics Data System (ADS)

Nessemon, K. D.; Popov, I. V.; Belyaev, V. V.; Belyaev, A. A.; Velichko, V. K.

2018-03-01

A design of an LED lamp with controllable shape and intensity of the light beam formed is described. The effect is achieved by dividing the light irradiating area for four section and their special fixation and fastening.

Network Randomization and Dynamic Defense for Critical Infrastructure Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chavez, Adrian R.; Martin, Mitchell Tyler; Hamlet, Jason

2015-04-01

Critical Infrastructure control systems continue to foster predictable communication paths, static configurations, and unpatched systems that allow easy access to our nation's most critical assets. This makes them attractive targets for cyber intrusion. We seek to address these attack vectors by automatically randomizing network settings, randomizing applications on the end devices themselves, and dynamically defending these systems against active attacks. Applying these protective measures will convert control systems into moving targets that proactively defend themselves against attack. Sandia National Laboratories has led this effort by gathering operational and technical requirements from Tennessee Valley Authority (TVA) and performing research and developmentmore » to create a proof-of-concept solution. Our proof-of-concept has been tested in a laboratory environment with over 300 nodes. The vision of this project is to enhance control system security by converting existing control systems into moving targets and building these security measures into future systems while meeting the unique constraints that control systems face.« less

Randomized Trial of a Peer-Led, Telephone-Based Empowerment Intervention for Persons With Chronic Spinal Cord Injury Improves Health Self-Management.

PubMed

Houlihan, Bethlyn Vergo; Brody, Miriam; Everhart-Skeels, Sarah; Pernigotti, Diana; Burnett, Sam; Zazula, Judi; Green, Christa; Hasiotis, Stathis; Belliveau, Timothy; Seetharama, Subramani; Rosenblum, David; Jette, Alan

2017-06-01

To evaluate the impact of "My Care My Call" (MCMC), a peer-led, telephone-based health self-management intervention in adults with chronic spinal cord injury (SCI). Single-blinded randomized controlled trial. General community. Convenience sample of adults with SCI (N=84; mean time post-SCI, 9.9y; mean age, 46y; 73.8% men; 44% with paraplegia; 58% white). Trained peer health coaches applied the person-centered health self-management intervention with 42 experimental subjects over 6 months on a tapered call schedule. The 42 control subjects received usual care. Both groups received the MCMC Resource Guide. Primary outcome-health self-management as measured by the Patient Activation Measure (PAM). Secondary outcomes-global ratings of service/resource use, health-related quality of life, and quality of primary care. Intervention participants averaged 12 calls over 6 months (averaging 21.8min each), with distinct variation. At 6 months, intervention participants reported a significantly greater change in PAM scores (6mo: estimate, 7.029; 95% confidence interval, .1018-13.956; P=.0468) compared with controls, with a trend toward significance at 4 months. At 6 months, intervention participants reported a significantly greater decrease in social/role activity limitations (estimate, -.443; P=.0389), greater life satisfaction (estimate, 1.0091; P=.0522), greater services/resources awareness (estimate, 1.678; P=.0253), greater overall service use (estimate, 1.069; P=.0240), and a greater number of services used (estimate, 1.542; P=.0077). Subgroups most impacted by MCMC on PAM change scores included the following: high social support, white persons, men, 1 to 6 years postinjury, and tetraplegic. This trial demonstrates that the MCMC peer-led, health self-management intervention achieved a positive impact on self-management to prevent secondary conditions in adults with SCI. These results warrant a larger, multisite trial of its efficacy and cost-effectiveness. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Linear CCD attitude measurement system based on the identification of the auxiliary array CCD

NASA Astrophysics Data System (ADS)

Hu, Yinghui; Yuan, Feng; Li, Kai; Wang, Yan

2015-10-01

Object to the high precision flying target attitude measurement issues of a large space and large field of view, comparing existing measurement methods, the idea is proposed of using two array CCD to assist in identifying the three linear CCD with multi-cooperative target attitude measurement system, and to address the existing nonlinear system errors and calibration parameters and more problems with nine linear CCD spectroscopic test system of too complicated constraints among camera position caused by excessive. The mathematical model of binocular vision and three linear CCD test system are established, co-spot composition triangle utilize three red LED position light, three points' coordinates are given in advance by Cooperate Measuring Machine, the red LED in the composition of the three sides of a triangle adds three blue LED light points as an auxiliary, so that array CCD is easier to identify three red LED light points, and linear CCD camera is installed of a red filter to filter out the blue LED light points while reducing stray light. Using array CCD to measure the spot, identifying and calculating the spatial coordinates solutions of red LED light points, while utilizing linear CCD to measure three red LED spot for solving linear CCD test system, which can be drawn from 27 solution. Measured with array CCD coordinates auxiliary linear CCD has achieved spot identification, and has solved the difficult problems of multi-objective linear CCD identification. Unique combination of linear CCD imaging features, linear CCD special cylindrical lens system is developed using telecentric optical design, the energy center of the spot position in the depth range of convergence in the direction is perpendicular to the optical axis of the small changes ensuring highprecision image quality, and the entire test system improves spatial object attitude measurement speed and precision.

SMAP Instrument Mechanical System Engineering

NASA Technical Reports Server (NTRS)

Slimko, Eric; French, Richard; Riggs, Benjamin

2013-01-01

The Soil Moisture Active Passive (SMAP) mission, scheduled for launch by the end of 2014, is being developed to measure the soil moisture and soil freeze/thaw state on a global scale over a three-year period. The accuracy, resolution, and global coverage of SMAP measurements are invaluable across many science and applications disciplines including hydrology, climate, carbon cycle, and the meteorological, environment, and ecology applications communities. The SMAP observatory is composed of a despun bus and a spinning instrument platform that includes both a deployable 6 meter aperture low structural frequency Astromesh reflector and a spin control system. The instrument section has engendered challenging mechanical system issues associated with the antenna deployment, flexible antenna pointing in the context of a multitude of disturbances, spun section mass properties, spin control system development, and overall integration with the flight system on both mechanical and control system levels. Moreover, the multitude of organizations involved, including two major vendors providing the spin subsystem and reflector boom assembly plus the flight system mechanical and guidance, navigation, and control teams, has led to several unique system engineering challenges. Capturing the key physics associated with the function of the flight system has been challenging due to the many different domains that are applicable. Key interfaces and operational concepts have led to complex negotiations because of the large number of organizations that integrate with the instrument mechanical system. Additionally, the verification and validation concerns associated with the mechanical system have had required far-reaching involvement from both the flight system and other subsystems. The SMAP instrument mechanical systems engineering issues and their solutions are described in this paper.

Temporal information processing in short- and long-term memory of patients with schizophrenia.

PubMed

Landgraf, Steffen; Steingen, Joerg; Eppert, Yvonne; Niedermeyer, Ulrich; van der Meer, Elke; Krueger, Frank

2011-01-01

Cognitive deficits of patients with schizophrenia have been largely recognized as core symptoms of the disorder. One neglected factor that contributes to these deficits is the comprehension of time. In the present study, we assessed temporal information processing and manipulation from short- and long-term memory in 34 patients with chronic schizophrenia and 34 matched healthy controls. On the short-term memory temporal-order reconstruction task, an incidental or intentional learning strategy was deployed. Patients showed worse overall performance than healthy controls. The intentional learning strategy led to dissociable performance improvement in both groups. Whereas healthy controls improved on a performance measure (serial organization), patients improved on an error measure (inappropriate semantic clustering) when using the intentional instead of the incidental learning strategy. On the long-term memory script-generation task, routine and non-routine events of everyday activities (e.g., buying groceries) had to be generated in either chronological or inverted temporal order. Patients were slower than controls at generating events in the chronological routine condition only. They also committed more sequencing and boundary errors in the inverted conditions. The number of irrelevant events was higher in patients in the chronological, non-routine condition. These results suggest that patients with schizophrenia imprecisely access temporal information from short- and long-term memory. In short-term memory, processing of temporal information led to a reduction in errors rather than, as was the case in healthy controls, to an improvement in temporal-order recall. When accessing temporal information from long-term memory, patients were slower and committed more sequencing, boundary, and intrusion errors. Together, these results suggest that time information can be accessed and processed only imprecisely by patients who provide evidence for impaired time comprehension. This could contribute to symptomatic cognitive deficits and strategic inefficiency in schizophrenia.

Effect of threading defects on InGaN /GaN multiple quantum well light emitting diodes

NASA Astrophysics Data System (ADS)

Ferdous, M. S.; Wang, X.; Fairchild, M. N.; Hersee, S. D.

2007-12-01

Photoelectrochemical etching was used to measure the threading defect (TD) density in InGaN multiple quantum well light-emitting diodes (LEDs) fabricated from commercial quality epitaxial wafers. The TD density was measured in the LED active region and then correlated with the previously measured characteristics of these LEDs. It was found that the reverse leakage current increased exponentially with TD density. The temperature dependence of this dislocation-related leakage current was consistent with a hopping mechanism at low reverse-bias voltage and Poole-Frenkel emission at higher reverse-bias voltage. The peak intensity and spectral width of the LED electroluminescence were found to be only weakly dependent on TD density for the measured TD range of 1×107-2×108cm-2.

The implementation of computerized cognitive behavioural therapies in a service user-led, third sector self help clinic.

PubMed

Cavanagh, Kate; Seccombe, Nick; Lidbetter, Nicky

2011-07-01

The efficacy and effectiveness of a computerized cognitive behavioural therapy (CCBT) package, Beating the Blues, has been demonstrated in a large randomized controlled trial and several pragmatic studies in the National Health Service (NHS). The current study tests the generalizability of this finding to the implementation of CCBT in a service user-led, third sector Self Help Clinic. 510 referrals for the Beating the Blues program were received over a 16 month period in routine care. The Patient Health Questionnaire Depression (PHQ-9) and Anxiety (GAD-7) Scales were administered pre-treatment and during each treatment session. The 10-item Clinical Outcomes in Routine Evaluation-Outcome Measure (CORE-OM), Work and Social Adjustment Scale and Patient Experience Questionnaire were also administered pre-treatment and immediately on completing treatment. More than two-thirds of referrals were suitable for treatment and completed a baseline assessment; 84% of these started the Beating the Blues program. Two-hundred and twenty-six people meeting caseness criteria at baseline completed at least two sessions of CCBT. Of these, 50% met recovery criteria at their final point of measurement. Completer and intention-to-treat analysis also demonstrated statistically and clinically significant improvements on key outcome measures. CCBT can be effectively implemented in a service user-led, third sector Self Help Clinic, increasing access to psychological therapies to meet local needs for tier two interventions for depression and anxiety.

Material Testing Device

NASA Technical Reports Server (NTRS)

1993-01-01

Small Business Innovation Research (SBIR) contracts led to two commercial instruments and a new subsidiary for Physical Sciences, Inc. (PSI). The FAST system, originally developed for testing the effect of space environment on materials, is now sold commercially for use in aging certification of materials intended for orbital operation. The Optical Temperature Monitor was designed for precise measurement of high temperatures on certain materials to be manufactured in space. The original research was extended to the development of a commercial instrument that measures and controls fuel gas temperatures in industrial boilers. PSI created PSI Environmental Instruments to market the system. The company also offers an Aerospace Measurement Service that has evolved from other SBIR contracts.

Rapid determination of lead for industrial hygiene surveys

NASA Astrophysics Data System (ADS)

Schneider, E. W.; Hill, R. F.

1982-02-01

Emphasis on the continued reduction of personnel exposure to airborne lead has led to the development and evaluation of portable instrumentation for the rapid determination of microgram quantities of lead collected on air filter samples. The instrumentation is based on radioisotope-induced X-ray fluorescence; a cadmium-109 radioisotope source is used for sample excitation, and the characteristic lead X-rays emitted are measured by a proportional detector. The effects of excitation source geometry, particle size, and interferences from other elements were investigated. This type of portable instrumentation appears ideally suited for in-plant measurements intended to monitor lead and evaluate new control measures.

Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Naomi J.; Poplawski, Michael E.

2013-10-01

This report reviews how phase-cut dimmers work, how LEDs differ from the incandescent lamps that the dimmers were historically designed to control, and how these differences can lead to complications when trying to dim LEDs. Compatibility between a specific LED source and a specific phase-cut dimmer is often unknown and difficult to assess, and ensuring compatibility adds complexity to the design, specification, bidding, and construction observation phases for new buildings and major remodel projects. To maximize project success, this report provides both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects, as wellmore » as real-world examples of how to use those procedures.« less

Dynamic control of supplemental lighting for greenhouse

NASA Astrophysics Data System (ADS)

Wang, Yuanxv; Wei, Ruihua; Xu, Lihong

2018-04-01

The development of light-emitting diodes (LED) technology to a large extent reduce the energy consumption of greenhouse, however, the light control methods to realize the energy saving still have great potential. The aim of this paper is to develop a more efficient control method of dynamic control of the LED top-lighting (TL) intensity and the LED inter-lighting (IL) intensity for the greatest economic benefits. A dynamic lighting control algorithm (DLC) based on model is proposed, which defines the economic benefit performance criterion of the supplemental lighting control. The optimal light intensity of TL and IL is calculated in real time according to the algorithm. The simulation shows that economic benefit can be increased by up to 107.35% compared to TL on-off control. It is concluded that DLC is a feasible supplemental light control method, especially under low natural light conditions.

Rebuilding from Resilience: Research Framework for a Randomized Controlled Trial of Community-led Interventions to Prevent Domestic Violence in Aboriginal Communities1

PubMed Central

Andersson, Neil; Shea, Beverley; Amaratunga, Carol; McGuire, Patricia; Sioui, Georges

2010-01-01

This research framework, which competed successfully in the 2008 CIHR open operating grants competition, focuses on protocols to measure the impact of community-led interventions to reduce domestic violence in Aboriginal communities. The project develops and tests tools and procedures for a randomized controlled trial of prevention of family violence. Women’s shelters mainly deal with victims of domestic violence, and the framework also addresses other types of domestic violence (male and female children, elderly, and disabled). The partner shelters are in Aboriginal communities across Canada, on and off reserve, in most provinces and territories. The baseline study applies a questionnaire developed by the shelters. Testing the stepped wedge design in an Aboriginal context, shelters randomized themselves to two waves of intervention, half the shelters receiving the resources for the first wave. A repeat survey after two years will measure the difference between first wave and second wave, after which the resources will shift to the second wave. At least two Aboriginal researchers will complete their doctoral studies in the project. The steering committee of 12 shelter directors guides the project and ensures ethical standards related to their populations. Each participating community and the University of Ottawa reviewed and passed the proposal. PMID:20975853

Increasing low-energy-dense foods and decreasing high-energy-dense foods differently influence weight loss trial outcomes

PubMed Central

Vadiveloo, M; Parker, H; Raynor, H

2018-01-01

BACKGROUND/OBJECTIVE Although reducing energy density (ED) enhances weight loss, it is unclear whether all dietary strategies that reduce ED are comparable, hindering effective ED guidelines for obesity treatment. This study examined how changes in number of low-energy-dense (LED) (<4.186 kJ/1.0 kcal g−1) and high-energy-dense (HED) (>12.56 kJ/3.0 kcal g−1) foods consumed affected dietary ED and weight loss within an 18-month weight loss trial. METHODS This secondary analysis examined data from participants randomized to an energy-restricted lifestyle intervention or lifestyle intervention plus limited non-nutrient dense, energy-dense food variety (n = 183). Number of daily LED and HED foods consumed was calculated from three, 24-h dietary recalls and anthropometrics were measured at 0, 6 and 18 months. Multivariable-adjusted generalized linear models and repeated-measures mixed linear models examined associations between 6-month changes in number of LED and HED foods and changes in ED, body mass index (BMI), and percent weight loss at 6 and 18 months. RESULTS Among mostly female (58%), White (92%) participants aged 51.9 years following an energy-restricted diet, increasing number of LED foods or decreasing number of HED foods consumed was associated with 6- and 18-month reductions in ED (β = − 0.25 to − 0.38 kJ g−1 (−0.06 to − 0.09 kcal g−1), P<0.001). Only increasing number of LED foods consumed was associated with 6- and 18-month reductions in BMI (β = − 0.16 to − 0.2 kg m−2, P<0.05) and 6-month reductions in percent weight loss (β = − 0.5%, P<0.05). Participants consuming ≤2 HED foods per day and ≥6.6 LED foods per day experienced better weight loss outcomes at 6- and 18-month than participants only consuming ≤2 HED foods per day. CONCLUSION Despite similar reductions in ED from reducing number of HED foods or increasing number of LED foods consumed, only increasing number of LED foods related to weight loss. This provides preliminary evidence that methods used to reduce dietary ED may differentially influence weight loss trajectories. Randomized controlled trials are needed to inform ED recommendations for weight loss. PMID:29406521

Effect of a Community Health Worker-Led Multicomponent Intervention on Blood Pressure Control in Low-income Patients in Argentina: A Randomized Clinical Trial

PubMed Central

He, Jiang; Irazola, Vilma; Mills, Katherine T.; Poggio, Rosana; Beratarrechea, Andrea; Dolan, Jacquelyn; Chen, Chung-Shiuan; Gibbons, Luz; Krousel-Wood, Marie; Bazzano, Lydia A.; Nejamis, Analia; Gulayin, Pablo; Santero, Marilina; Augustovski, Federico; Chen, Jing; Rubinstein, Adolfo

2017-01-01

Importance Despite extensive knowledge of hypertension treatment, the prevalence of uncontrolled hypertension is high and increasing in low- and middle-income countries. Objective To test whether a community health worker (CHW)-led multicomponent intervention would improve blood pressure (BP) control among low-income patients with hypertension. Design, Setting, and Participants A cluster randomized trial was conducted in 18 centers for primary healthcare within a national public system providing free medications and healthcare to uninsured patients in Argentina. A total of 1,432 low-income adult patients with uncontrolled hypertension were recruited between June 2013 and April 2015 and followed to October 2016. Intervention Nine centers (743 patients) were randomized to the multicomponent intervention, which included a CHW-led home intervention (health coaching, home BP monitoring, and BP audit and feedback), a physician intervention, and a text-messaging intervention over 18 months. Nine centers (689 patients) were randomized to usual care without study intervention. Main Outcomes and Measures The co-primary outcomes were the differences between the intervention and control groups in systolic and diastolic BP changes from baseline to end of follow-up in patients with hypertension. Secondary outcomes included the proportion of patients with controlled hypertension (BP<140/90 mmHg). Three BP measurements were obtained at each of two baseline and two termination visits using a standard protocol, and the means were used for analyses. Results Among 1,432 participants (mean age, 55.8 years; 772 [53.0%] women), 1,357 (94.8%) completed the trial. Baseline mean BP was 151.7 and 149.8 mmHg for systolic, and 92.2 and 90.1 mmHg for diastolic in the intervention and control groups, respectively. Systolic BP reduction from baseline to month 18 was 19.3 mmHg (95% confidence interval [CI]: 17.9, 20.8) in the intervention group and 12.7 mmHg (95% CI: 11.3, 14.2) in the control group; difference in the reduction was 6.6 mmHg (95% CI: 4.6, 8.6; p<0.001). Diastolic BP decreased by 12.2 mmHg (95% CI: 11.2, 13.2) in the intervention group and 6.9 mmHg (95% CI: 5.9, 7.8) in the control group; difference in the reduction was 5.4 mmHg (95% CI: 4.0, 6.8; p<0.001). The proportion of controlled hypertension increased from 17.0% at baseline to 72.9% at 18 months in the intervention group and from 17.6% to 52.2% in the control group; difference in the increase was 20.6% (95% CI: 15.4, 25.9%; p<0.001). No adverse events were reported. Conclusion and Relevance Among low-income patients with uncontrolled hypertension in Argentina, a CHW-led multicomponent intervention compared with usual care resulted in a greater decrease in systolic and diastolic BP over 18 months. Further research is needed to assess generalizability and cost-effectiveness of this intervention, and to understand which components may have contributed most to the outcome. Trial Registration clinicaltrials.gov Identifier: NCT01834131 PMID:28975305

Evaluation of the impact of a school gardening intervention on children's fruit and vegetable intake: a randomised controlled trial.

PubMed

Christian, Meaghan S; Evans, Charlotte El; Nykjaer, Camilla; Hancock, Neil; Cade, Janet E

2014-08-16

Current academic literature suggests that school gardening programmes can provide an interactive environment with the potential to change children's fruit and vegetable intake. This is the first cluster randomised controlled trial (RCT) designed to evaluate whether a school gardening programme can have an effect on children's fruit and vegetable intake. The trial included children from 23 schools; these schools were randomised into two groups, one to receive the Royal Horticultural Society (RHS)-led intervention and the other to receive the less involved Teacher-led intervention. A 24-hour food diary (CADET) was used to collect baseline and follow-up dietary intake 18 months apart. Questionnaires were also administered to evaluate the intervention implementation. A total of 641 children completed the trial with a mean age of 8.1 years (95% CI: 8.0, 8.4). The unadjusted results from multilevel regression analysis revealed that for combined daily fruit and vegetable intake the Teacher-led group had a higher daily mean change of 8 g (95% CI: -19, 36) compared to the RHS-led group -32 g (95% CI: -60, -3). However, after adjusting for possible confounders this difference was not significant (intervention effect: -40 g, 95% CI: -88, 1; p = 0.06). The adjusted analysis of process measures identified that if schools improved their gardening score by 3 levels (a measure of school gardening involvement - the scale has 6 levels from 0 'no garden' to 5 'community involvement'), irrespective of group allocation, children had, on average, a daily increase of 81 g of fruit and vegetable intake (95% CI: 0, 163; p = 0.05) compared to schools that had no change in gardening score. This study is the first cluster randomised controlled trial designed to evaluate a school gardening intervention. The results have found very little evidence to support the claims that school gardening alone can improve children's daily fruit and vegetable intake. However, when a gardening intervention is implemented at a high level within the school it may improve children's daily fruit and vegetable intake by a portion. Improving children's fruit and vegetable intake remains a challenging task. ISRCTN11396528.

830 nm light-emitting diode low level light therapy (LED-LLLT) enhances wound healing: a preliminary study.

PubMed

Min, Pok Kee; Goo, Boncheol Leo

2013-01-01

The application of light-emitting diodes in a number of clinical fields is expanding rapidly since the development in the late 1990s of the NASA LED. Wound healing is one field where low level light therapy with LEDs (LED-LLLT) has attracted attention for both accelerating wound healing and controlling sequelae. The present study evaluated LED-LLLT in 5 wounds of various etiologies. There were 5 patients with ages ranging from 7 to 54 years, comprising 2 males and 3 females. The study followed 5 wounds, namely 2 acute excoriation wounds; 1 acute/subacute dog bite with infection; 1 subacute post-filler ulcerated wound with necrotic ischemic tissue and secondary infection; and 1 subacute case of edema and infection of the lips with herpes simplex involvement after an illegal cosmetic tattoo operation. All patients were in varying degrees of pain. All wounds were treated with multiple sessions (daily, every other day or twice weekly) using an LED-LLLT system (830 nm, CW, irradiance of 100 mW/cm(2) and fluence of 60 J/cm(2)) till improvement was achieved. Full wound healing and control of infection and discomfort were achieved in all patients, with wound condition-mediated treatment periods ranging from 1 to 8 weeks. No recurrence of the herpes simplex case was seen in a 4-month follow-up. 830 nm LED-LLLT successfully brought about accelerated healing in wounds of different etiologies and at different stages, and successfully controlled secondary infection. LED-LLLT was easy and pain-free to apply, and was well-tolerated by all patients. The good results warrant the design of controlled studies with a larger patient population.

830 nm light-emitting diode low level light therapy (LED-LLLT) enhances wound healing: a preliminary study

PubMed Central

Min, Pok Kee; Goo, Boncheol Leo

2013-01-01

Background and aims: The application of light-emitting diodes in a number of clinical fields is expanding rapidly since the development in the late 1990s of the NASA LED. Wound healing is one field where low level light therapy with LEDs (LED-LLLT) has attracted attention for both accelerating wound healing and controlling sequelae. The present study evaluated LED-LLLT in 5 wounds of various etiologies. Subjects and methods: There were 5 patients with ages ranging from 7 to 54 years, comprising 2 males and 3 females. The study followed 5 wounds, namely 2 acute excoriation wounds; 1 acute/subacute dog bite with infection; 1 subacute post-filler ulcerated wound with necrotic ischemic tissue and secondary infection; and 1 subacute case of edema and infection of the lips with herpes simplex involvement after an illegal cosmetic tattoo operation. All patients were in varying degrees of pain. All wounds were treated with multiple sessions (daily, every other day or twice weekly) using an LED-LLLT system (830 nm, CW, irradiance of 100 mW/cm2 and fluence of 60 J/cm2) till improvement was achieved. Results: Full wound healing and control of infection and discomfort were achieved in all patients, with wound condition-mediated treatment periods ranging from 1 to 8 weeks. No recurrence of the herpes simplex case was seen in a 4-month follow-up. Conclusions: 830 nm LED-LLLT successfully brought about accelerated healing in wounds of different etiologies and at different stages, and successfully controlled secondary infection. LED-LLLT was easy and pain-free to apply, and was well-tolerated by all patients. The good results warrant the design of controlled studies with a larger patient population. PMID:24155549

Color adjustable LED driver design based on PWM

NASA Astrophysics Data System (ADS)

Du, Yiying; Yu, Caideng; Que, Longcheng; Zhou, Yun; Lv, Jian

2012-10-01

Light-emitting diode (LED) is a liquid cold source light source that rapidly develops in recent years. The merits of high brightness efficiency, long duration, high credibility and no pollution make it satisfy our demands for consumption and natural life, and gradually replace the traditional lamp-house-incandescent light and fluorescent light. However, because of the high cost and unstable drive circuit, the application range is restricted. To popularize the applications of the LED, we focus on improving the LED driver circuit to change this phenomenon. Basing on the traditional LED drive circuit, we adopt pre-setup constant current model and introduce pulse width modulation (PWM) control method to realize adjustable 256 level-grays display. In this paper, basing on human visual characteristics and the traditional PWM control method, we propose a new PWM control timing clock to alter the duty cycle of PWM signal to realize the simple gamma correction. Consequently, the brightness can accord with our visual characteristics.

A New Individually Addressable Micro-LED Array for Photogenetic Neural Stimulation.

PubMed

McGovern, B; Berlinguer Palmini, R; Grossman, N; Drakakis, E; Poher, V; Neil, M A A; Degenaar, P

2010-12-01

Here, we demonstrate the use of a micro light emitting diode (LED) array as a powerful tool for complex spatiotemporal control of photosensitized neurons. The array can generate arbitrary, 2-D, excitation patterns with millisecond and micrometer resolution. In particular, we describe an active matrix control address system to allow simultaneous control of 256 individual micro LEDs. We present the system optically integrated into a microscope environment and patch clamp electrophysiology. The results show that the emitters have sufficient radiance at the required wavelength to stimulate neurons expressing channelrhodopsin-2 (ChR2).

Effects of botanicals and combined hormone therapy on cognition in postmenopausal women.

PubMed

Maki, Pauline M; Rubin, Leah H; Fornelli, Deanne; Drogos, Lauren; Banuvar, Suzanne; Shulman, Lee P; Geller, Stacie E

2009-01-01

The aim of this study was to characterize the effects of red clover, black cohosh, and combined hormone therapy on cognitive function in comparison to placebo in women with moderate to severe vasomotor symptoms. In a phase II randomized, double-blind, placebo-controlled study, 66 midlife women (of 89 from a parent study; mean age, 53 y) with 35 or more weekly hot flashes were randomized to receive red clover (120 mg), black cohosh (128 mg), 0.625 mg conjugated equine estrogens plus 2.5 mg medroxyprogesterone acetate (CEE/MPA), or placebo. Participants completed measures of verbal memory (primary outcome) and other cognitive measures (secondary outcomes) before and during the 12th treatment month. A subset of 19 women completed objective, physiological measures of hot flashes using ambulatory skin conductance monitors. Neither of the botanical treatments had an impact on any cognitive measure. Compared with placebo, CEE/MPA led to a greater decline in verbal learning (one of five verbal memory measures). This effect just missed statistical significance (P = 0.057) in unadjusted analyses but reached significance (P = 0.02) after adjusting for vasomotor symptoms. Neither of the botanical treatment groups showed a change in verbal memory that differed from the placebo group (Ps > 0.28), even after controlling for improvements in hot flashes. In secondary outcomes, CEE/MPA led to a decrease in immediate digit recall and an improvement in letter fluency. Only CEE/MPA significantly reduced objective hot flashes. Results indicate that a red clover (phytoestrogen) supplement or black cohosh has no effects on cognitive function. CEE/MPA reduces objective hot flashes but worsens some aspects of verbal memory.

Effects of Botanicals and Combined Hormone Therapy on Cognition in Postmenopausal Women

PubMed Central

Maki, Pauline M.; Rubin, Leah H.; Fornelli, Deanne; Drogos, Lauren; Banuvar, Suzanne; Shulman, Lee P.; Geller, Stacie E.

2009-01-01

Objective To characterize the effects of red clover, black cohosh, and combined hormone therapy on cognitive function in comparison to placebo in women with moderate to severe vasomotor symptoms. Design In a Phase II randomized, double-blind, placebo-controlled study, 66 midlife women (out of 89 from a parent study; mean age=53 y) with ≥ 35 weekly hot flashes were randomized to receive red clover (120 mg), black cohosh (128 mg), CEE/MPA (0.625 mg conjugated equine estrogens plus 2.5 mg medroxyprogesterone acetate), or placebo. Participants completed measures of verbal memory (primary outcome) and other cognitive measures (secondary outcomes) before and during the 12th treatment month. A subset of 19 women completed objective, physiological measures of hot flashes using ambulatory skin conductance monitors. Results There was no impact of either of the botanical treatments on any cognitive measure. Compared to placebo, CEE/MPA led to greater decline in verbal learning (one of five verbal memory measures). This effect just missed statistical significance (p=0.057) in unadjusted analyses, but reached significance (p=.02) after adjusting for vasomotor symptoms. Neither botanical treatment group showed a change in verbal memory that differed from the placebo group (ps>0.28), even after controlling for improvements in hot flashes. In secondary outcomes, CEE/MPA led to a decrease in immediate digit recall and an improvement in letter fluency. Only CEE/MPA significantly reduced objective hot flashes. Conclusions Results indicate no effects of a red clover (phytoestrogen) supplement or black cohosh on cognitive function. CEE/MPA reduces objective hot flashes but worsens some aspects of verbal memory. PMID:19590458

A new integrating sphere design for spectral radiant flux determination of light-emitting diodes

NASA Astrophysics Data System (ADS)

Hanselaer, P.; Keppens, A.; Forment, S.; Ryckaert, W. R.; Deconinck, G.

2009-09-01

Light-emitting diode (LED) technology is developing very quickly and may be considered an alternative for traditional light sources. However, at this moment, manufacturers and end users of LEDs are facing a rather basic but major problem. The lack of standardization regarding optical and electrical characterization of LEDs appears to compromise a successful implementation. In particular, numbers quoted for the luminous flux, and consequently for the efficacy of LEDs, are very sensitive data because they are used to impress and push the LED market. In this paper, the most was made of the typical hemispherical radiation of high-power LEDs to increase the accuracy of the flux determination using a custom-made integrating sphere. Recently developed measurement techniques such as the use of an external spectral irradiance standard and an optimized spectral irradiance detection head are combined with a very particular port geometry and a minimized baffle area. This results in a uniform spatial response distribution function (SRDF), which guarantees an accurate radiant and luminous flux determination, irrespective of the spatial intensity distribution of the LED package or luminaire. The effect of the directional response of the detector head on the SRDF has been explored. Measurements on LED devices with and without external optics are presented, illustrating the possibilities of the measurement setup.

A randomised controlled trial of peer-adult-led intervention on improvement of knowledge, attitudes and behaviour of university students regarding HIV/AIDS in Malaysia.

PubMed

Jahanfar, S; Lye, M S; Rampal, L

2009-02-01

The aim of this study was to investigate the knowledge, attitudes and behaviour of university students regarding acquired immunodeficiency syndrome (AIDS) and the human immunodeficiency virus (HIV). A randomised controlled trial of 530 university students was done using peer-adult facilitators. Participants completed a questionnaire before and after the intervention, which was a four-hour group session. A prevention programme was developed by local experts, health educators and peer facilitators. The peer-adult-led programme was designed to provide a conceptual model of HIV risk reduction through information, motivational and behavioural skills, a harm reduction module and health promotion theme. The main outcome measured was the level of knowledge, attitudes and behaviour scores. The results suggest that relative to the control group, participants in the intervention group had higher levels of knowledge (30.37 vs. 25.40; p-value is 0.001) and a better attitude (12.27 vs. 10.84; p-value is 0.001). However, there was no difference in the behavioural score (9.47 vs. 9.41; p-value is 0.530). The correlation between the level of knowledge and age and the level of education was found in the intervention group, but not in the control group (p-value is 0.01). Attitude and gender were found to be correlated in the intervention group only (p-value is 0.01). Our programme was successful in increasing knowledge and improving attitudes towards AIDS and HIV. However, it did not improve risk-taking behaviour. Peer-adult-led educational programmes for youth using various interactional activities, such as small group discussions, poster activity and empathy exercises, can be successful in changing the prevailing youth perceptions of AIDS and HIV.

Implementation and evaluation of a pharmacist-led hypertension management service in primary care: outcomes and methodological challenges.

PubMed

Bajorek, Beata; Lemay, Kate S; Magin, Parker; Roberts, Christopher; Krass, Ines; Armour, Carol L

2016-01-01

Suboptimal utilisation of pharmacotherapy, non-adherence to prescribed treatment, and a lack of monitoring all contribute to poor blood (BP) pressure control in patients with hypertension. The objective of this study was to evaluate the implementation of a pharmacist-led hypertension management service in terms of processes, outcomes, and methodological challenges. A prospective, controlled study was undertaken within the Australian primary care setting. Community pharmacists were recruited to one of three study groups: Group A (Control - usual care), Group B (Intervention), or Group C (Short Intervention). Pharmacists in Groups B and C delivered a service comprising screening and monitoring of BP, as well as addressing poor BP control through therapeutic adjustment and adherence strategies. Pharmacists in Group C delivered the shortened version of the service. Significant changes to key outcome measures were observed in Group C: reduction in systolic and diastolic BPs at the 3-month visit (P<0.01 and P<0.01, respectively), improvement in medication adherence scores (P=0.01), and a slight improvement in quality of life (EQ-5D-3L Index) scores (P=0.91). There were no significant changes in Group B (the full intervention), and no differences in comparison to Group A (usual care). Pharmacists fed-back that patient recruitment was a key barrier to service implementation, highlighting the methodological implications of screening. A collaborative, pharmacist-led hypertension management service can help monitor BP, improve medication adherence, and optimise therapy in a step-wise approach. However, blood pressure screening can effect behaviour change in patients, presenting methodological challenges in the evaluation of services in this context.

Implementation and evaluation of a pharmacist-led hypertension management service in primary care: outcomes and methodological challenges

PubMed Central

2016-01-01

Background: Suboptimal utilisation of pharmacotherapy, non-adherence to prescribed treatment, and a lack of monitoring all contribute to poor blood (BP) pressure control in patients with hypertension. Objective: The objective of this study was to evaluate the implementation of a pharmacist-led hypertension management service in terms of processes, outcomes, and methodological challenges. Method: A prospective, controlled study was undertaken within the Australian primary care setting. Community pharmacists were recruited to one of three study groups: Group A (Control – usual care), Group B (Intervention), or Group C (Short Intervention). Pharmacists in Groups B and C delivered a service comprising screening and monitoring of BP, as well as addressing poor BP control through therapeutic adjustment and adherence strategies. Pharmacists in Group C delivered the shortened version of the service. Results: Significant changes to key outcome measures were observed in Group C: reduction in systolic and diastolic BPs at the 3-month visit (P<0.01 and P<0.01, respectively), improvement in medication adherence scores (P=0.01), and a slight improvement in quality of life (EQ-5D-3L Index) scores (P=0.91). There were no significant changes in Group B (the full intervention), and no differences in comparison to Group A (usual care). Pharmacists fed-back that patient recruitment was a key barrier to service implementation, highlighting the methodological implications of screening. Conclusion: A collaborative, pharmacist-led hypertension management service can help monitor BP, improve medication adherence, and optimise therapy in a step-wise approach. However, blood pressure screening can effect behaviour change in patients, presenting methodological challenges in the evaluation of services in this context. PMID:27382427

Characteristics of white LED transmission through a smoke screen

NASA Astrophysics Data System (ADS)

Zheng, Yunfei; Yang, Aiying; Feng, Lihui; Guo, Peng

2018-01-01

The characteristics of white LED transmission through a smoke screen is critical for visible light communication through a smoke screen. Based on the Mie scattering theory, the Monte Carlo transmission model is established. Based on the probability density function, the white LED sampling model is established according to the measured spectrum of a white LED and the distribution angle of the lambert model. The sampling model of smoke screen particle diameter is also established according to its distribution. We simulate numerically the influence the smoke thickness, the smoke concentration and the angle of irradiance of white LED on transmittance of the white LED. We construct a white LED smoke transmission experiment system. The measured result on the light transmittance and the smoke concentration agreed with the simulated result, and demonstrated the validity of simulation model for visible light transmission channel through a smoke screen.

A new visual analog scale to measure distinctive well-being effects of LED photobiomodulation

NASA Astrophysics Data System (ADS)

Michel, François; Barolet, Daniel

2016-03-01

LED photobiomodulation is known mostly for its restorative effects on skin and joints. While providing LED photobiomodulation aesthetic treatments of the face, not only the skin condition was improved, but a subjective well-being effect was observed, obvious both in photographs of the treated areas and in patient behaviour. This has been supported by studies showing the beneficial effects of transcranial lasers and LEDs on neurological and psychological conditions, providing great insight. LED therapy can now be used as a standalone procedure to regulate neuronal function. To measure such neurological outcomes in humans, we developed a visual analog scale questionnaire with the purpose of having a convenient tool for the assessment of quality of life following facial LED photobiomodulation.We also gauged patients' emotional state regarding overall aesthetic improvement.

Relative impact of short-term emissions controls on gas and particle-phase oxidative potential during the 2015 China Victory Day Parade in Beijing, China

NASA Astrophysics Data System (ADS)

Huang, Wei; Fang, Dongqing; Shang, Jing; Li, Zhengqiang; Zhang, Yang; Huo, Peng; Liu, Zhaoying; Schauer, James J.; Zhang, Yuanxun

2018-06-01

A field observation focusing on reactive oxygen species (ROS) was conducted before, during, and after the 2015 China Victory Day Parade to understand the influence of short-term emissions controls on atmospheric oxidative activity. The hourly average concentrations of PM2.5, SO2, NO, NO2, CO, O3, as well as gas and particle-phase ROS, were measured using a series of online instruments. PM2.5 concentrations during control days were significantly lower than non-control days, which directly lead to the "Parade Blue", yet reductions of most gaseous pollutants except SO2 were not so obvious as PM. Similarly, the control measures also led to a great loss of particle-phase ROS throughout the control period, while the reduction of ROS in gas phase was not obvious until the more stringent measures implemented since September 1. Furthermore, only weak positive correlations were observed among ROS and some other measured species, indicating ROS concentrations were affected by a number of comprehensive factors that single marker could not capture. Meanwhile, meteorological condition and regional transportation were also shown to be the minor factors affecting atmospheric oxidizing capacity. The results of this observation mainly revealed the control measures were conducive to reducing particle-related ROS. However, the reduction of gas-phase ROS activity was less effective given the menu of controls employed for the 2015 China Victory Day Parade. Therefore, short-term emissions controls only aimed to PM reduction and visibility improvement will produce the blue sky but will not equivalently reduce the gas-phase ROS. Supplemental control measures will be needed to further reduce gas-phase ROS concentrations.

Light-Emitting Diode (LED) Traps Improve the Light-Trapping of Anopheline Mosquitoes.

PubMed

Costa-Neta, B M; da Silva, A A; Brito, J M; Moraes, J L P; Rebêlo, J M M; Silva, F S

2017-11-07

Numerous advantages over the standard incandescent lamp favor the use of light-emitting diodes (LEDs) as an alternative and inexpensive light source for sampling medically important insects in surveillance studies. Previously published studies examined the response of mosquitoes to different wavelengths, but data on anopheline mosquito LED attraction are limited. Center for Disease Control and Prevention-type light traps were modified by replacing the standard incandescent lamp with 5-mm LEDs, one emitting at 520 nm (green) and the other at 470 nm (blue). To test the influence of moon luminosity on LED catches, the experiments were conducted during the four lunar phases during each month of the study period. A total of 1,845 specimens representing eight anopheline species were collected. Anopheles (Nyssorhynchus) evansae (35.2%) was the most frequently collected, followed by An. (Nys.) triannulatus (21.9%), An. (Nys.) goeldii (12.9%), and An. (Nys.) argyritarsis (11.5%). The green LED was the most attractive light source, accounting for 43.3% of the individuals collected, followed by the blue (31.8%) and control (24.9%) lights. The LED traps were significantly more attractive than the control, independent of the lunar phase. Light trapping of anopheline mosquitoes was more efficient when the standard incandescent lamp was replaced with LEDs, regardless of the moon phase. The efficiency of LEDs improves light trapping results, and it is suggested that the use of LEDs as an attractant for anopheline mosquitoes should be taken into consideration when sampling anopheline mosquitoes. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Comparative performance analysis of shunt and series passive filter for LED lamp

NASA Astrophysics Data System (ADS)

Sarwono, Edi; Facta, Mochammad; Handoko, Susatyo

2018-03-01

Light Emitting Diode lamp or LED lamp nowadays is widely used by consumers as a new innovation in the lighting technologies due to its energy saving for low power consumption lamps for brighter light intensity. How ever, the LED lamp produce an electric pollutant known as harmonics. The harmonics is generated by rectifier as part of LED lamp circuit. The present of harmonics in current or voltage has made the source waveform from the grid is distorted. This distortion may cause inacurrate measurement, mall function, and excessive heating for any element at the grid. This paper present an analysis work of shunt and series filters to suppress the harmonics generated by the LED lamp circuit. The work was initiated by conducting several tests to investigate the harmonic content of voltage and currents. The measurements in this work were carried out by using HIOKI Power Quality Analyzer 3197. The measurement results showed that the harmonics current of tested LED lamps were above the limit of IEEE standard 519-2014. Based on the measurement results shunt and series filters were constructed as low pass filters. The bode analysis were appled during construction and prediction of the filters performance. Based on experimental results, the application of shunt filter at input side of LED lamp has reduced THD current up to 88%. On the other hand, the series filter has significantly reduced THD current up to 92%.

Defect-Reduction Mechanism for Improving Radiative Efficiency in InGaN/GaN Light-Emitting Diodes using InGaN Underlayers

DOE PAGES

Armstrong, Andrew M.; Bryant, Benjamin N.; Crawford, Mary H.; ...

2015-04-01

The influence of a dilute In xGa 1-xN (x~0.03) underlayer (UL) grown below a single In 0.16Ga 0.84N quantum well (SQW), within a light-emitting diode(LED), on the radiative efficiency and deep level defect properties was studied using differential carrier lifetime (DCL) measurements and deep level optical spectroscopy (DLOS). DCL measurements found that inclusion of the UL significantly improved LED radiative efficiency. At low current densities, the non-radiative recombination rate of the LED with an UL was found to be 3.9 times lower than theLED without an UL, while the radiative recombination rates were nearly identical. This, then, suggests that themore » improved radiative efficiency resulted from reduced non-radiative defect concentration within the SQW. DLOS measurement found the same type of defects in the InGaN SQWs with and without ULs. However, lighted capacitance-voltage measurements of the LEDs revealed a 3.4 times reduction in a SQW-related near-mid-gap defect state for the LED with an UL. Furthermore, quantitative agreement in the reduction of both the non-radiative recombination rate (3.9×) and deep level density (3.4×) upon insertion of an UL corroborates deep level defect reduction as the mechanism for improved LED efficiency.« less

A LED-based phosphorimeter for measurement of microcirculatory oxygen pressure.

PubMed

Guerci, Philippe; Ince, Yasin; Heeman, Paul; Faber, Dirk; Ergin, Bulent; Ince, Can

2017-02-01

Quantitative measurements of microcirculatory and tissue oxygenation are of prime importance in experimental research. The noninvasive phosphorescence quenching method has given further insight into the fundamental mechanisms of oxygen transport to healthy tissues and in models of disease. Phosphorimeters are devices dedicated to the study of phosphorescence quenching. The experimental applications of phosphorimeters range from measuring a specific oxygen partial pressure (Po 2 ) in cellular organelles such as mitochondria, finding values of Po 2 distributed over an organ or capillaries, to measuring microcirculatory Po 2 changes simultaneously in several organ systems. Most of the current phosphorimeters use flash lamps as a light excitation source. However, a major drawback of flash lamps is their inherent plasma glow that persists for tens of microseconds after the primary discharge. This complex distributed excitation pattern generated by the flash lamp can lead to inaccurate Po 2 readings unless a deconvolution analysis is performed. Using light-emitting diode (LED), a rectangular shaped light pulse can be generated that provides a more uniformly distributed excitation signal. This study presents the design and calibration process of an LED-based phosphorimeter (LED-P). The in vitro calibration of the LED-P using palladium(II)-meso-tetra(4-carboxyphenyl)-porphyrin (Pd-TCCP) as a phosphorescent dye is presented. The pH and temperature were altered to assess whether the decay times of the Pd-TCCP measured by the LED-P were significantly influenced. An in vivo validation experiment was undertaken to measure renal cortical Po 2 in a rat subjected to hypoxic ventilation conditions and ischemia/reperfusion. The benefits of using LEDs as a light excitation source are presented. Copyright © 2017 the American Physiological Society.

Light-emitting diodes for analytical chemistry.

PubMed

Macka, Mirek; Piasecki, Tomasz; Dasgupta, Purnendu K

2014-01-01

Light-emitting diodes (LEDs) are playing increasingly important roles in analytical chemistry, from the final analysis stage to photoreactors for analyte conversion to actual fabrication of and incorporation in microdevices for analytical use. The extremely fast turn-on/off rates of LEDs have made possible simple approaches to fluorescence lifetime measurement. Although they are increasingly being used as detectors, their wavelength selectivity as detectors has rarely been exploited. From their first proposed use for absorbance measurement in 1970, LEDs have been used in analytical chemistry in too many ways to make a comprehensive review possible. Hence, we critically review here the more recent literature on their use in optical detection and measurement systems. Cloudy as our crystal ball may be, we express our views on the future applications of LEDs in analytical chemistry: The horizon will certainly become wider as LEDs in the deep UV with sufficient intensity become available.

A Randomized Trial of Peer-Delivered Self-Management Support for Hypertension

PubMed Central

Schapira, Marilyn M.; Fletcher, Kathlyn E.; Hayes, Avery; Morzinski, Jeffrey; Laud, Purushottam; Eastwood, Dan; Ertl, Kristyn; Patterson, Leslie; Mosack, Katie E.

2014-01-01

BACKGROUND Peer-led interventions to improve chronic disease self-management can improve health outcomes but are not widely used. Therefore, we tested a peer-led hypertension self-management intervention delivered at regular meetings of community veterans’ organizations. METHODS We randomized 58 organizational units (“posts”) of veterans’ organizations in southeast Wisconsin to peer-led vs. professionally delivered self-management education. Volunteer peer leaders at peer-led posts delivered monthly presentations regarding hypertension self-management during regular post meetings. Volunteer post representatives at seminar posts encouraged post members to attend 3 didactic seminars delivered by health professionals at a time separate from the post meeting. Volunteers in both groups encouraged members to self-monitor using blood pressure cuffs, weight scales, and pedometers. Our primary outcome was change in systolic blood pressure (SBP) at 12 months. RESULTS We measured SBP in 404 participants at baseline and in 379 participants at 12 months. SBP decreased significantly (4.4mm Hg; P < 0.0001) overall; the decrease was similar in peer-led and seminar posts (3.5mm Hg vs. 5.4mm Hg; P = 0.24). Among participants with uncontrolled BP at baseline, SBP decreased by 10.1mm Hg from baseline to 12 months but was again similar in the 2 groups. This pattern was also seen at 6 months and with diastolic blood pressure. CONCLUSIONS Our peer-led educational intervention was not more effective than didactic seminars for SBP control. Although peer-led educational programs have had important impacts in a number of studies, we did not find our intervention superior to a similar intervention delivered by healthcare professionals. Clinical trial registration ClinicalTrials.gov NCT00571038. PMID:24755206

Assessment of the effects of laser or LED photobiomodulation on hypothyroid rats of cutaneous wound healing: A morphometric study.

NASA Astrophysics Data System (ADS)

De Castro, Isabele Cardoso Vieira; Paraguassú, Gardênia Matos; dod Reis Júnior, João Alves; Xavier, Flávia Caló Aquino; Rodriguez, Tânia Tavares; Ramalho, Maria José Pedreira; Pinheiro, Antônio L. B.; Ramalho, Luciana Maria Pedreira

2012-09-01

Hypothyroid has been associated to a disruption of the body's metabolism, including the healing process. Laser and LED have been shown to be effective on improving healing in many situations, but their benefit in the improvement of healing on hypothyroidism remains unknown. The aim of this study was to assess, morphometrically, the influence of Laser (λ660nm, 24 J/cm2, 40mW, CW, spot output= 4mm2;) and LED (λ630nm ± 20, 24 J/cm2, 150mW, CW, spot output= 0.5 cm2) on the wound healing of rats with Hypothyroid. Under general anesthesia, a standard surgical wound (1cm2) was created on the dorsum of 72 male Wistar rats divided into 6 groups of 12 animals each: G1: Euthyroid; G2: Euthyroid + Laser; G3: Euthyroid + LED; G4: Hypothyroid; G5: Hypothyroid + Laser and G6: Hypothyroid + LED. Hypothyroidism was induced in rats with propylthiouracil (0.05g/100mL) administered orally for 4 weeks and maintained until the end of the experiment. Rats were irradiated after surgery each 48h then killed after 7 and 14 days. Statistical analysis was performed using ANOVA and Tukey's test. Hypothyroid rats with phototherapy laser or LED showed significant less wound contraction than euthyroid's rats at the 7th day (p<0.05). At the 14th day, the longitudinal measurement was significantly higher in euthyroids (control and irradiated with laser) when compared to the hypothyroid group (p <0.05). This study has shown that hypothyroidism delays wound healing and Laser and LED photobiomodulation using 24 J/cm2 per session improved cutaneous wound healing in hypothyroid rats.

Control of zoonotic cutaneous leishmaniasis vector, Phlebotomus papatasi, using attractive toxic sugar baits (ATSB).

PubMed

Saghafipour, Abedin; Vatandoost, Hassan; Zahraei-Ramazani, Ali Reza; Yaghoobi-Ershadi, Mohammad Reza; Rassi, Yavar; Karami Jooshin, Moharram; Shirzadi, Mohammad Reza; Akhavan, Amir Ahmad

2017-01-01

Attractive Toxic Sugar Baits (ATSB) is a new vector control method that meets Integrated Vector Management (IVM) goals. In an experimental design, this study aimed to determine effects of ATSB on control of Phlebotomus papatasi, as a main vector of Zoonotic Cutaneous Leishmaniasis (ZCL), in Qom Province, center of Iran. In a cross-sectional design, boric acid was mixed with brown sugar solution and tested as toxic baits for P. papatasi. Two methods were utilized to use the baits: (a) spraying ATSB on vegetation, bushes, and shrubs; and (b) setting ATSB-treated barrier fences in front of colonies at 500 m distance from the houses in outskirts of villages. In order to examine the residual efficacy rate of ATSB-treated barrier fences, the bioassay test was used. Density of P. papatasi sandflies was measured using sticky and light traps biweekly. For data analysis, Mann-Whitney U Test and Kruskal-Wallis were used. Results ATSB-treated barrier fences led to 3 times reduction in P. papatasi population. Besides that, ATSB spraying on plants led to more than 5 times reduction in P. papatasi population. Comparing the incidence of leishmaniasis in treated villages before and after the study showed that the incidence was statistically reduced. Therefore, ATSB is an effective method to control vectors and prevent leishmaniasis.

Head-mounted LED for optogenetic experiments of freely-behaving animal

NASA Astrophysics Data System (ADS)

Kwon, Ki Yong; Gnade, Andrew G.; Rush, Alexander D.; Patten, Craig D.

2016-03-01

Recent developments in optogenetics have demonstrated the ability to target specific types of neurons with sub-millisecond temporal precision via direct optical stimulation of genetically modified neurons in the brain. In most applications, the beam of a laser is coupled to an optical fiber, which guides and delivers the optical power to the region of interest. Light emitting diodes (LEDs) are an alternative light source for optogenetics and they provide many advantages over a laser based system including cost, size, illumination stability, and fast modulation. Their compact size and low power consumption make LEDs suitable light sources for a wireless optogenetic stimulation system. However, the coupling efficiency of an LED's output light into an optical fiber is lower than a laser due to its noncollimated output light. In typical chronic optogenetic experiment, the output of the light source is transmitted to the brain through a patch cable and a fiber stub implant, and this configuration requires two fiber-to-fiber couplings. Attenuation within the patch cable is potential source of optical power loss. In this study, we report and characterize a recently developed light delivery method for freely-behaving animal experiments. We have developed a head-mounted light source that maximizes the coupling efficiency of an LED light source by eliminating the need for a fiber optic cable. This miniaturized LED is designed to couple directly to the fiber stub implant. Depending on the desired optical power output, the head-mounted LED can be controlled by either a tethered (high power) or battery-powered wireless (moderate power) controller. In the tethered system, the LED is controlled through 40 gauge micro coaxial cable which is thinner, more flexible, and more durable than a fiber optic cable. The battery-powered wireless system uses either infrared or radio frequency transmission to achieve real-time control. Optical, electrical, mechanical, and thermal characteristics of the head-mounted LED were evaluated.

Comparison between whole-body vibration, light-emitting diode, and cycling warm-up on high-intensity physical performance during sprint bicycle exercise.

PubMed

Teles, Maria C; Fonseca, Ivana A T; Martins, Jeanne B; de Carvalho, Marielle M; Xavier, Murilo; Costa, Sidney J; de Avelar, Núbia C P; Ribeiro, Vanessa G C; Salvador, Fabiano S; Augusto, Leonardo; Mendonça, Vanessa A; Lacerda, Ana C R

2015-06-01

The purpose of this study was to compare the effects of light-emitting diode (LED) irradiation and whole-body vibration (WBV) delivered either in isolation or combination (LED + WBV), warm-up (WU), and a control (C) treatment on performance during a sprint bicycle exercise. Ten cyclists performed a 30-second sprint cycle test under these conditions. The LED light was applied at 4 points bilaterally. Whole-body vibration consisted of 5 minutes of squats associated with WBV. LED + WBV consisted of WBV followed by LED therapy. Warm-up consisted of 17 minutes of moderate-intensity bicycle exercise. Control consisted of 10 minutes at rest. Blood lactate (BL) and ammonia (BA) levels and skin temperature (ST) were determined. Peak power (842 ± 117 vs. 800 ± 106 vs. 809 ± 128 W [p = 0.02 and p = 0.01]), relative power (12.1 ± 1.0 vs. 11.5 ± 0.9 vs. 11.6 ± 1.0 W·kg [p = 0.02 and p = 0.02]), and relative work (277 ± 23 vs. 263 ± 24 vs. 260 ± 23 J·kg [p = 0.02 and p = 0.003]) were higher in the WU group compared with the control and LED groups. In the LED + WBV group, peak (833 ± 115 vs. 800 ± 106 W [p = 0.02]) and relative (11.9 ± 0.9 vs. 11.5 ± 0.9 W·kg [p = 0.02]) power were higher than those in the control group, and relative work (272 ± 22 vs. 260 ± 23 J·kg [p = 0.02]) were improved compared with the LED group. There were no differences for BL, BA, and ST. The findings of this study confirmed the effectiveness of a warm-up as a preparatory activity and demonstrated that LED + WBV and WBV were as effective as WU in improving cyclist performance during a sprint bicycle exercise.

Conceptual design of wearpack with physiology detector feature based on wearable instrumentation

NASA Astrophysics Data System (ADS)

Sukirman, Melani; Laksono, Pringgo Widyo; Priadythama, Ilham; Susmartini, Susy; Suhardi, Bambang

2017-11-01

Every company in Indonesia is responsible for their worker health and safety condition as mentioned in UU No I year 1970. In manufacturing industries, there are many manual tasks dealing with high work load and risk, so that they require excellent concentration and physical condition. There is no ideal way to guarantee worker safety without a real time physiological monitoring. This paper reports our ongoing study in conceptual design development of worker's clothing which is equipped with a wearable instrumentation system. The system is designed to detect and measure body temperature and pulse in real time. Some electrical components such as, LCD (liquid crystal display), LEDs (light emitting diode), batteries, and physiological sensors were assembled. All components are controlled by a wearable on board controller. LEDs is used as alert which can indicate abnormal physical conditions. The LCD was added to provide more detail information. TMP 36 and XD-58C were selected as the physiological sensors. Finally, an Arduino Lilypad was chosen for the controller. This instrumentation system was verified by accurately detected and inform physiological condition of 3 subjects. Further we are going to attach the system to a worker's clothing which was specifically designed to simplify and comfortable usage.

Determination of Cd, Cr, Pb and Ni contents among Parkinson's disease individuals: a case-control study.

PubMed

Gupta, Vineeta; Ansari, Nasreen Ghazi; Garg, Ravindra Kumar; Khattri, Sanjay

2017-09-01

Various uses of metals in industries, including the domestic sphere, agriculture, medicine and technology, have led to their wide distribution in the environment. These result in raising concerns over their potential effects on human health and the environment. Because of their high degree of toxicity, Cd, Cr and Pb are some of the priority metals that are of public health significance. The levels of Cd, Cr, Pb and Ni were measured in Parkinson's disease (PD) patients. Blood samples were collected from 40 patients and 40 healthy controls, and stored at -80 °C until assayed. Atomic absorption spectrophotometry was used to determine the levels of metals. The level of Pb was significantly decreased in patients than in controls. However, the difference in the level of Ni between patients and controls failed to reach significance. Cr was not detectable in patients, but it was measurable in 12 controls (controls = 0.056-2.397 µg/ml). Similarly, Cd was not detectable in patients, but it was measurable in all the controls (controls = 0.004-1.268 µg/ml). Pb was the only metal that was found in all study participants (PD = 0.012-2.758 µg/ml and controls = 0.779-9.840 µg/ml). Ni could be measured only in six patients and in all the controls (PD = 0.154-0.754 µg/ml and controls = 0.034-1.691 µg/ml). Patients exhibited significantly decreased levels of Pb than in controls. However, Cd, Cr and Ni were too low to be measured among the patients. This indicates that these metals might play a probable role in PD.

Management of fluid mud in estuaries, bays, and lakes. II: Measurement, modeling, and management

USGS Publications Warehouse

McAnally, W.H.; Teeter, A.; Schoellhamer, David H.; Friedrichs, C.; Hamilton, D.; Hayter, E.; Shrestha, P.; Rodriguez, H.; Sheremet, A.; Kirby, R.

2007-01-01

Techniques for measurement, modeling, and management of fluid mud are available, but research is needed to improve them. Fluid mud can be difficult to detect, measure, or sample, which has led to new instruments and new ways of using existing instruments. Multifrequency acoustic fathometers sense neither density nor viscosity and are, therefore, unreliable in measuring fluid mud. Nuclear density probes, towed sleds, seismic, and drop probes equipped with density meters offer the potential for accurate measurements. Numerical modeling of fluid mud requires solving governing equations for flow velocity, density, pressure, salinity, water surface, plus sediment submodels. A number of such models exist in one-, two-, and three-dimensional form, but they rely on empirical relationships that require substantial site-specific validation to observations. Management of fluid mud techniques can be classified as those that accomplish: Source control, formation control, and removal. Nautical depth, a fourth category, defines the channel bottom as a specific fluid mud density or alternative parameter as safe for navigation. Source control includes watershed management measures to keep fine sediment out of waterways and in-water measures such as structures and traps. Formation control methods include streamlined channels and structures plus other measures to reduce flocculation and structures that train currents. Removal methods include the traditional dredging and transport of dredged material plus agitation that contributes to formation control and/or nautical depth. Conditioning of fluid mud by dredging and aerating offers the possibility of improved navigability. Two examples—the Atchafalaya Bar Channel and Savannah Harbor—illustrate the use of measurements and management of fluid mud.

Assessment of contamination and misclassification biases in a randomized controlled trial of a social network peer education intervention to reduce HIV risk behaviors among drug users and risk partners in Philadelphia, PA and Chiang Mai, Thailand

PubMed Central

Simmons, Nicole; Donnell, Deborah; Ou, San-san; Celentano, David D.; Aramrattana, Apinun; Davis-Vogel, Annet; Metzger, David; Latkin, Carl

2015-01-01

Context Controlled trials of educational interventions are susceptible to contamination. Objectives To test a contamination measure based on recall of terms. Main study A randomized controlled trial of a social network peer education intervention among 1,123 injection drug users and risk partners in Philadelphia, PA and Chiang Mai, Thailand. Methods We assessed the recall of test, negative and positive control terms by intervention and control arm participants and compared the relative odds (OR) of recall of test vs. negative control terms between study arms. Results The contamination measure showed good discriminant ability only among participants from Chiang Mai. In Philadelphia there was no evidence of contamination and little evidence of diffusion. In Chiang Mai there was evidence of diffusion and contamination of 4 of 5 terms tested. Conclusions Network structure and peer education in Chiang Mai likely led to contamination. Recall of intervention materials can be a useful method to detect contamination in trials of educational interventions. PMID:25935214

Compact light-emitting-diode sun photometer for atmospheric optical depth measurements.

PubMed

Acharya, Y B; Jayaraman, A; Ramachandran, S; Subbaraya, B H

1995-03-01

A new compact light-emitting diode (LED) sun photometer, in which a LED is used as a spectrally selective photodetector as well as a nonlinear feedback element in the operational amplifier, has been developed. The output voltage that is proportional to the logarithm of the incident solar intensity permits the direct measurement of atmospheric optical depths in selected spectral bands. Measurements made over Ahmedabad, India, show good agreement, within a few percent, of optical depths derived with a LED as a photodetector in a linear mode and with a LED as both a photodetector and a feedback element in an operational amplifier in log mode. The optical depths are also found to compare well with those obtained simultaneously with a conventional filter photometer.

Wafer bonding process for building MEMS devices

NASA Astrophysics Data System (ADS)

Pabo, Eric F.; Meiler, Josef; Matthias, Thorsten

2014-06-01

The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

Separating Automatic and Intentional Inhibitory Mechanisms of Attention in Adults with Attention-Deficit/Hyperactivity Disorder

PubMed Central

Roberts, Walter; Fillmore, Mark T.; Milich, Richard

2011-01-01

Researchers in the cognitive sciences recognize a fundamental distinction between automatic and intentional mechanisms of inhibitory control. The use of eye-tracking tasks to assess selective attention has led to a better understanding of this distinction in specific populations such as children with attention-deficit/hyperactivity disorder (ADHD). This study examined automatic and intentional inhibitory control mechanisms in adults with ADHD using a saccadic interference (SI) task and a delayed ocular response (DOR) task. Thirty adults with ADHD were compared to 27 comparison adults on measures of inhibitory control. The DOR task showed that adults with ADHD were less able than comparison adults to inhibit a reflexive saccade towards the sudden appearance of a stimulus in the periphery. However, SI task performance showed that the ADHD group did not differ significantly from the comparison group on a measure of automatic inhibitory control. These findings suggest a dissociation between automatic and intentional inhibitory deficits in adults with ADHD. PMID:21058752

D-camphor-crataegus berry extract combination increases blood pressure and cognitive functioning in the elderly - a randomized, placebo controlled double blind study.

PubMed

Werner, Natalie S; Duschek, Stefan; Schandry, Rainer

2009-12-01

The present study investigated whether the D-camphor-crataegus berry extract combination Korodin elevates blood pressure and enhances cognitive performance in the elderly population. Eighty women aged between 50 and 80 years were examined based on a randomized, placebo controlled double blind design. Blood pressure was measured sphygmomanometrically and through continuous noninvasive recording. Cognitive performance was assessed by means of two tests measuring general information processing capacity and visuomotor speed. The administration of the drug led to a short term increase in blood pressure as well as in cognitive performance as compared to placebo. Potential physiological mechanisms of action mediating this effect, including hemodynamic alterations, sympathetic stimulation as well as improvement of cerebral metabolism are discussed.

BioSentinel: Developing a Space Radiation Biosensor

NASA Technical Reports Server (NTRS)

Santa Maria, Sergio R.

2015-01-01

BioSentinel is an autonomous fully self-contained science mission that will conduct the first study of the biological response to space radiation outside low Earth orbit (LEO) in over 40 years. The 4-unit (4U) BioSentinel biosensor system, is housed within a 6-Unit (6U) spacecraft, and uses yeast cells in multiple independent microfluidic cards to detect and measure DNA damage that occurs in response to ambient space radiation. Cell growth and metabolic activity will be measured using a 3-color LED detection system and a metabolic indicator dye with a dedicated thermal control system per fluidic card.

Feasibility of utilizing an all-volunteer workforce as a disruptive innovation for the US obesity epidemic

PubMed Central

Kraschnewski, Jennifer L.; Hwang, Kevin O.; George, Daniel R.; Lehman, Erik B.; Sciamanna, Christopher N.

2014-01-01

Objectives As the prevalence of obesity in US adults continues to increase, addressing weight control will require an effective, lower-cost intervention. A model for delivering free peer-to-peer counseling has the potential to create a paradigm shift in the way weight and other chronic illnesses are addressed in the US. The objective of this study is to understand the potential for utilizing successful peer volunteers as counselors in weight control programs and as a possible intervention strategy to address the global obesity epidemic in a cost-effective manner. Study Design This cross-sectional study surveyed a nationwide panel of US adults (n=806) in 2010. Methods We created survey items to identify participant interest in three specific types of weight control programs; a free program led by successful peers, a paid program led by successful peers and a program led by trained paid professionals. Statistical analysis was conducted in 2011. Logistic regression was used to adjust for the effect of potential confounders on participant interest in different weight control programs and willingness to volunteer. Results More than three times as many subjects (27.4% v. 8.3%) were interested in the free peer-led program versus the expert-led paid option. Of participants who had ever had successful weight loss, 15% were interested in volunteering to help others lose weight. Conclusions Individuals appear to be willing to both attend and conduct peer volunteer-led weight control groups. Further research is necessary to develop and test interventions to assess the effectiveness of such interventions. PMID:25263838

A Review on Experimental Measurements for Understanding Efficiency Droop in InGaN-Based Light-Emitting Diodes

PubMed Central

Jin, Jie; Mi, Chenziyi; Hao, Zhibiao; Luo, Yi; Sun, Changzheng; Han, Yanjun; Xiong, Bing; Wang, Jian; Li, Hongtao

2017-01-01

Efficiency droop in GaN-based light emitting diodes (LEDs) under high injection current density perplexes the development of high-power solid-state lighting. Although the relevant study has lasted for about 10 years, its mechanism is still not thoroughly clear, and consequently its solution is also unsatisfactory up to now. Some emerging applications, e.g., high-speed visible light communication, requiring LED working under extremely high current density, makes the influence of efficiency droop become more serious. This paper reviews the experimental measurements on LED to explain the origins of droop in recent years, especially some new results reported after 2013. Particularly, the carrier lifetime of LED is analyzed intensively and its effects on LED droop behaviors are uncovered. Finally, possible solutions to overcome LED droop are discussed. PMID:29072611

Data Acquisition Systems

NASA Technical Reports Server (NTRS)

1989-01-01

Technology developed during a joint research program with Langley and Kinetic Systems Corporation led to Kinetic Systems' production of a high speed Computer Automated Measurement and Control (CAMAC) data acquisition system. The study, which involved the use of CAMAC equipment applied to flight simulation, significantly improved the company's technical capability and produced new applications. With Digital Equipment Corporation, Kinetic Systems is marketing the system to government and private companies for flight simulation, fusion research, turbine testing, steelmaking, etc.

Temperature rise induced by some light emitting diode and quartz-tungsten-halogen curing units.

PubMed

Asmussen, Erik; Peutzfeldt, Anne

2005-02-01

Because of the risk of thermal damage to the pulp, the temperature rise induced by light-curing units should not be too high. LED (light emitting diode) curing units have the main part of their irradiation in the blue range and have been reported to generate less heat than QTH (quartz-tungsten-halogen) curing units. This study had two aims: first, to measure the temperature rise induced by ten LED and three QTH curing units; and, second, to relate the measured temperature rise to the power density of the curing units. The light-induced temperature rise was measured by means of a thermocouple embedded in a small cylinder of resin composite. The power density was measured by using a dental radiometer. For LED units, the temperature rise increased with increasing power density, in a statistically significant manner. Two of the three QTH curing units investigated resulted in a higher temperature rise than LED curing units of the same power density. Previous findings, that LED curing units induce less temperature rise than QTH units, does not hold true in general.

Illumination-parameter adjustable and illumination-distribution visible LED helmet for low-level light therapy on brain injury

NASA Astrophysics Data System (ADS)

Wang, Pengbo; Gao, Yuan; Chen, Xiao; Li, Ting

2016-03-01

Low-level light therapy (LLLT) has been clinically applied. Recently, more and more cases are reported with positive therapeutic effect by using transcranial light emitting diodes (LEDs) illumination. Here, we developed a LLLT helmet for treating brain injuries based on LED arrays. We designed the LED arrays in circle shape and assembled them in multilayered 3D printed helmet with water-cooling module. The LED arrays can be adjust to touch the head of subjects. A control circuit was developed to drive and control the illumination of the LLLT helmet. The software portion provides the control of on and off of each LED arrays, the setup of illumination parameters, and 3D distribution of LLLT light dose in human subject according to the illumination setups. This LLLT light dose distribution was computed by a Monte Carlo model for voxelized media and the Visible Chinese Human head dataset and displayed in 3D view at the background of head anatomical structure. The performance of the whole system was fully tested. One stroke patient was recruited in the preliminary LLLT experiment and the following neuropsychological testing showed obvious improvement in memory and executive functioning. This clinical case suggested the potential of this Illumination-parameter adjustable and illuminationdistribution visible LED helmet as a reliable, noninvasive, and effective tool in treating brain injuries.

Portable microcontroller-based instrument for near-infrared spectroscopy

NASA Astrophysics Data System (ADS)

Giardini, Mario E.; Corti, Mario; Lago, Paolo; Gelmetti, Andrea

2000-05-01

Near IR Spectroscopy (NIRS) can be employed to noninvasively and continuously measure in-vivo local changes in haemodynamics and oxygenation of human tissues. In particular, the technique can be particularly useful for muscular functional monitoring. We present a portable NIRS research-grade acquisition system prototype, strictly dedicate to low-noise measurements during muscular exercise. The prototype is able to control four LED sources and a detector. Such a number of sources allows for multipoint measurements or for multi-wavelength spectroscopy of tissue constituents other than oxygen, such as cytochrome aa3 oxidation. The LEDs and the detector are mounted on separate probes, which carry also the relevant drivers and preamplifiers. By employing surface-mount technologies, probe size and weight are kept to a minimum. A single-chip mixed-signal RISC microcontroller performs source-to- detector multiplexing with a digital correlation technique. The acquired data are stored on an on-board 64 K EEPROM bank, and can be subsequently uploaded to a personal computer via serial port for further analysis. The resulting instrument is compact and lightweight. Preliminary test of the prototype on oxygen consumption during tourniquet- induced forearm ischaemia show adequate detectivity and time response.

The endurance of the effects of the penalty point system in Spain three years after. Main influencing factors.

PubMed

Izquierdo, F Aparicio; Ramírez, B Arenas; McWilliams, J M Mira; Ayuso, J Páez

2011-05-01

In this work we have used ARIMA time series models to analyse the contribution of the penalty point system, the most important legislative measure for driving licences, in reducing the number of fatalities over 24h on the roads in Spain during the study period (January 1995 to June 2009). In addition, because of this long period of analysis, other control variables were introduced to model the enactment of the Reform of the Penal Code in December 2007, together with other more specific effects needed to fit the model correctly. The ARIMA intervention models methodology combines the basic features of specific times series models: it controls the trend and seasonal variation in data that is present when modelling the structure through autoregressive and moving average parameters and allows for inserting step or impulse input variables for checking and evaluating the effects of deterministic measures, such as legislative changes which are the object of study in this work. This paper analyses the surveillance and control measures introduced in the periods before and after the implementation of the penalty point system and helps to partly explain its apparent endurance over time. The results show that the introduction of the penalty point system in Spain had a very positive effect in reducing the number of fatalities (over 24h) on the road, and that this effect has endured up to the present time. This success may be due to the continuing increase in surveillance measures and fines as well the significantly growing interest shown by the news media in road safety since the measures were introduced. All this has led to positive changes in driver behaviour. It is, therefore, a combination of three factors: the penalty point system, the gradual stepping up of surveillance measures and sanctions, and the publicity given to road safety issues in the mass media would appear to be the key to success. The absence of any of these three factors would have predictably led to a far less positive evolution of the accident rate on Spanish roads. Copyright © 2010 Elsevier Ltd. All rights reserved.

The impact of the carer support needs assessment tool (CSNAT) in community palliative care using a stepped wedge cluster trial.

PubMed

Aoun, Samar M; Grande, Gunn; Howting, Denise; Deas, Kathleen; Toye, Chris; Troeung, Lakkhina; Stajduhar, Kelli; Ewing, Gail

2015-01-01

Family caregiving towards the end-of-life entails considerable emotional, social, financial and physical costs for caregivers. Evidence suggests that good support can improve caregiver psychological outcomes. The primary aim of this study was to investigate the impact of using the carer support needs assessment tool (CSNAT), as an intervention to identify and address support needs in end of life home care, on family caregiver outcomes. A stepped wedge design was used to trial the CSNAT intervention in three bases of Silver Chain Hospice Care in Western Australia, 2012-14. The intervention consisted of at least two visits from nurses (2-3 weeks apart) to identify, review and address caregivers' needs. The outcome measures for the intervention and control groups were caregiver strain and distress as measured by the Family Appraisal of Caregiving Questionnaire (FACQ-PC), caregiver mental and physical health as measured by SF-12v2, and caregiver workload as measured by extent of caregiver assistance with activities of daily living, at baseline and follow up. Total recruitment was 620. There was 45% attrition for each group between baseline and follow-up mainly due to patient deaths resulting in 322 caregivers completing the study (233 in the intervention group and 89 in the control group). At follow-up, the intervention group showed significant reduction in caregiver strain relative to controls, p=0.018, d=0.348 (95% CI 0.25 to 0.41). Priority support needs identified by caregivers included knowing what to expect in the future, having time for yourself in the day and dealing with your feelings and worries. Despite the challenges at the clinician, organisational and trial levels, the CSNAT intervention led to an improvement in caregiver strain. Effective implementation of an evidence-informed and caregiver-led tool represents a necessary step towards helping palliative care providers better assess and address caregiver needs, ensuring adequate family caregiver support and reduction in caregiver strain.

A high-resolution line sensor-based photostereometric system for measuring jaw movements in 6 degrees of freedom.

PubMed

Hayashi, T; Kurokawa, M; Miyakawa, M; Aizawa, T; Kanaki, A; Saitoh, A; Ishioka, K

1994-01-01

Photostereometry has widely been applied to the measurement of mandibular movements in 6 degrees of freedom. In order to improve the accuracy of this measurement, we developed a system utilizing small LEDs mounted on the jaws in redundant numbers and a 5000 pixel linear charge-coupled device (CCD) as a photo-sensor. A total of eight LEDs are mounted on the jaws, in two sets of four, by means of connecting facebows, each weighing approximately 55 g. The position of the LEDs are detected in three-dimensions by two sets of three CCD cameras, located bilaterally. The position and orientation of the mandible are estimated from the positions of all LEDs measured in the sense of least-squares, thereby effectively reducing the measurement errors. The static overall accuracy at all tooth and condylar points was considered to lie within 0.19 and 0.34 mm, respectively, from various accuracy verification tests.

Effects of integrated treatment with LED and microcurrent on muscle tone and stiffness in the calf muscle during moderate aerobic exercise.

PubMed

Han, Sang-Wan; Lee, Jeong-Woo

2018-06-01

[Purpose] This study aimed to investigate the effects of the therapeutic device combined with LED and microcurrent (MC) on muscle tone and stiffness in the calf muscle after its application during moderate aerobic exercise. [Subjects and Methods] Twenty healthy adult subjects were randomized to either the test group of the therapeutic device combined with LED and MC or the control group, and they walked on a 10%-sloped treadmill with a 5 km/hr speed for 30 minutes. Each of the subjects in the test group performed treadmill exercise with the therapeutic device attached to the edge of his or her calf muscle. After the exercise, the muscle tone and stiffness at the edge of the calf muscle were measured. [Results] With respect to the muscle tone, a statistically significant difference was found between the two groups only 5 minutes after the exercise. Concerning muscle stiffness, significant differences were shown between the two groups right after the exercise and 5 minutes after the exercise. [Conclusion] Integrated treatment with LED and MC on is considered helpful for lowering the muscle tone 5 minutes after the exercise, and for lowering the muscle stiffness right after the exercise and 5 minutes after the exercise.

A randomised controlled trial of clinics in secondary schools for adolescents with asthma.

PubMed Central

Salisbury, Chris; Francis, Caia; Rogers, Chris; Parry, Kate; Thomas, Huw; Chadwick, Stephanie; Turton, Pat

2002-01-01

AIM: To compare a nurse-led clinic in schools versus care in general practice for adolescents with asthma. DESIGN OF STUDY: Randomised controlled trial in four schools; parallel observational study in two schools. SETTING: Six comprehensive schools. METHOD: In the randomised trial, pupils were invited to attend asthma review at a nurse-led clinic either in school, or in general practice. The parallel observational study compared pupils invited to practice care within and outside the randomised trial. Primary outcome measures were attendance for asthma review, symptom control, and quality of life. Secondary outcomes were knowledge, attitudes, inhaler technique, use of steroids, school absence, peak flow rate, preference for future care, health service utilisation, and costs. RESULTS: School clinic pupils were more likely to attend an asthma review than those randomised to practice care (90.8% versus 51.0% overall [P < 0.001, not consistent across schools]). No differences were observed in symptom control (P = 0.42) or quality of life (P = 0.63). Pupils attending school clinics had greater knowledge of asthma (difference = +0.38, 95% CI = 0.19 to 0.56), more positive attitudes (difference = +0.21, 95% CI = 0.05 to 0.36), and better inhaler technique (P < 0.001, not consistent across all schools). No differences were observed in school absence or peak flow rate. A majority (63%) of those who had received care at school preferred this model in future. Median costs of providing care at school and at the practice were 32.10 Pounds and 19.80 Pounds, respectively. No differences were observed between the groups in the observational comparison on any outcome. CONCLUSIONS: The schools asthma clinic increased uptake of asthma reviews. There were improvements in various process measures, but not in clinical outcomes. PMID:12528584

Comparison between tocotrienol and omeprazole on gastric growth factors in stress-exposed rats.

PubMed

Nur Azlina, Mohd Fahami; Qodriyah, Hj Mohd Saad; Chua, Kien Hui; Kamisah, Yusof

2017-08-28

To investigate and compare the effects of tocotrienol and omeprazole on gastric growth factors in rats exposed to water-immersion restraint stress (WIRS). Twenty-eight male Wistar rats were randomly assigned to four groups of seven rats. The two control groups were administered vitamin-free palm oil (vehicle) and the two treatment groups were given omeprazole (20 mg/kg) or tocotrienol (60 mg/kg) by oral gavage. After 28 d of treatment, rats from one control group and both treated groups were subjected to WIRS one time for 3.5 h. Gastric lesions were measured and gastric tissues were obtained to measure vascular endothelial growth factor (VEGF), epidermal growth factor (EGF), basic fibroblast growth factor (bFGF), and transforming growth factor-alpha (TGF-α) mRNA expression. Rats exposed to WIRS for 3.5 h demonstrated the presence of considerable ulcers in the form of gastric erosion. The lesion index in the stressed control (S) group was increased ( P < 0.001) compared to the tocotrienol treated and omeprazole treated groups. Stress led to a decrease in gastric VEGF ( P < 0.001), bFGF ( P < 0.001) and TGF-α ( P < 0.001) mRNA levels and caused an increase in EGF mRNA ( P < 0.001) that was statistically significant compared to the non-stressed control group. Although both treatment agents exerted similar ulcer reducing ability, only treatment with tocotrienol led to increased expression of VEGF ( P = 0.008), bFGF ( P = 0.001) and TGF-α ( P = 0.002) mRNA. Tocotrienol provides gastroprotective effects in WIRS-induced ulcers. Compared to omeprazole, tocotrienol exerts a similar protective effect, albeit through multiple mechanisms of protection, particularly through up-regulation of growth factors that assist in repair of gastric tissue injuries.

Add-on treatment with teneligliptin ameliorates glucose fluctuations and improves glycemic control index in Japanese patients with type 2 diabetes on insulin therapy.

PubMed

Tanaka, Seiichi; Suzuki, Kunihiro; Aoki, Chie; Niitani, Mai; Kato, Kanako; Tomotsune, Takanori; Aso, Yoshimasa

2014-12-01

This study investigated whether teneligliptin, a novel dipeptidyl peptidase-4 inhibitor, ameliorated glucose fluctuations in hospitalized Japanese patients with type 2 diabetes receiving insulin therapy, with or without other antidiabetes drugs, and using continuous glucose monitoring (CGM). Twenty-six patients with type 2 diabetes were admitted for glycemic control. After admission, patients continued to be treated with optimal dietary therapy plus insulin therapy, with or without other antidiabetes drugs, until they achieved stable glycemic control. CGM measurements were made for 7 consecutive days. On Days 1-3, patients received insulin with or without other antidiabetes drugs, and on Days 4-7, teneligliptin 20 mg once daily at breakfast was added to ongoing therapy. Doses of insulin were fixed during the study. Levels of serum glycated albumin (GA), 1,5-anhydro-d-glucitol (1,5-AG), and high-sensitivity C-reactive protein (hsCRP) were measured. Add-on treatment with teneligliptin led to significant improvements in 24-h mean glucose levels, the proportion of time in normoglycemia, mean amplitude of glycemic excursions, and total area under the curve within 2 h after each meal. The proportion of time in hypoglycemia and hsCRP levels did not increase significantly compared with before teneligliptin. Values of 1,5-AG and GA were significantly improved by treatment with teneligliptin. Addition of teneligliptin to insulin therapy led to a significant improvement in diurnal glycemic control and significant reductions in glucose fluctuations in 24-h periods without increasing hypoglycemia in Japanese patients with type 2 diabetes on insulin therapy, with or without other antidiabetes agents.

A Novel Infrared Gas Monitor

NASA Astrophysics Data System (ADS)

Wang, Yingding; Zhong, Hongjie

2000-03-01

In the paper a novel non-dispersive infrared(IR) gas monitor is described.It is based on the principle that certain gases absorb IR radiation at specific(and often unique) wavelengths.Conventional devices typically include several primary components:a broadband source, usually an incandescent filament,a rotating chopper shutter,a narrow-band filter,a sample tube and a detector. We have developed a number of IR light emitting diodes(LED) having narrow optical bandwidths and which can be intensity modulated by electrical means,for example InAsSbP(4.2 micron)LED.The IR LED can thus replace the thermal source,narrow-band filter and chopper assembly of the conventional IR gas monitor,yielding a solid state,low- powered,compact and almost maintenance-free instrument with high sensitivity and stability and which free of the effects of mechanical vibration too. The detector used in the IR gas monitor is the solid-state detector,such as PbS,PbSe, InSb,HgCdTe,TGS,LT and PZT detector etc. The different configuration of the IR gas monitor is designed.For example,two-path version for measuring methane concentration by monitoring the 3.31 micron absorption band,it can eliminate the interference effects,such as to compensate for LED intensity changes caused by power and temperature variations,and for signal fluctuations due to changes in detector bias. we also have designed portable single-beam version without the sample tube.Its most primary advantage is very cheap(about cost USD 30 ).It measures carbon dioxide concentration by monitoring the 4.25 micron absorption band.Thought its precisions is low,it is used to control carbon dioxide concentration in the air in the green houses and plastic houses(there are about twenty millon one in the China).Because more carbon dioxide will increase the quanity of vegetable and flower production to a greatextent. It also is used in medical,sanitary and antiepidemic applications,such as hospital, store,hotel,cabin and ballroom etc. Key words:infrared gas monitor LED

Plant experiments with light-emitting diode module in Svet space greenhouse

NASA Astrophysics Data System (ADS)

Ilieva, Iliyana; Ivanova, Tania; Naydenov, Yordan; Dandolov, Ivan; Stefanov, Detelin

Light is necessary for photosynthesis and shoot orientation in the space plant growth facilities. Light modules (LM) must provide sufficient photosynthetic photon flux for optimal efficiency of photosynthetic processes and also meet the constraints for power, volume and mass. A new LM for SVET Space Greenhouse using Cree R XLamp R 7090 XR light-emitting diodes (LEDs) is developed. Three types of monochromic LEDs emitting in the red, green, and blue region of the spectrum are used. The new LM contains 36 LED spots - 30 LED spots with one red, green and blue LED and 6 LED spots with three red LEDs. DMX programming device controls the LED spots and can set 231 levels of light intensity thus achieving Photosynthetic Photon Flux Density (PPFD) in the range 0-400 µmol.m-2 .s-1 and different percentages of the red, green and blue light, depending on the experimental objectives. Two one-month experiments with "salad-type" plants - lettuce and chicory were carried at 400 µmol.m-2 .s-1 PPFD (high light - HL) and 220 µmol.m-2 .s-1 PPFD (low light - LL) and composition 70% red, 20% green and 10% blue light. In vivo modulated chlorophyll fluorescence was measured by a PAM fluorometer on leaf discs and the following parameters: effective quantum yield of Photosystem II (ΦP SII ) and non-photochemical quenching (NPQ) were calculated. Both lettuce and chicory plants grown at LL express higher photochemical activity of Photosystem II (PSII) than HL grown plants, evaluated by the actual PSII quantum yield, ΦP SII . The calculated steady state NPQ values did not differ significantly in lettuce and chicory. The rapid phase of the NPQ increase was accelerated in all studied LL leaves. In conclusion low light conditions ensured more effective functioning of PSII than HL when lettuce and chicory plants were grown at 70% red, 20% green and 10% blue light composition.

Comparative clinical study using laser and LED-therapy for orofacial pain relief: dentin hypersensitivity and cervicogenic headache

NASA Astrophysics Data System (ADS)

Lizarelli, Rosane F. Z.; Pizzo, Renata C. A.; Florez, Fernando L. E.; Grecco, Clovis; Speciali, Jose G.; Bagnato, Vanderlei S.

2015-06-01

Considering several clinical situations, low intensity laser therapy has been widely applied in pain relief or analgesia mechanism. With the advent of new LED-based (light emitting diode) light sources, the need of further clinical experiments aiming to compare the effectiveness among them is paramount. The LED system therapeutic use can be denominated as LEDT - Light Emitting Diode Therapy. This study proposed two clinical evaluations of pain relief effect: to dentin hypersensitivity and to cervicogenic headache using different sources of lasers (low and high intensity) and light emitting diodes (LEDs), one emitting at the spectral band of red (630+/- 5nm) and the other one at infrared band (880+/- 5nm). Two different clinical studies were performed and presented interesting results. Considering dentin hypersensitivity, red and infrared led were so effective than the control group (high intensity laser system); by the other side, considering cervicogenic headache, control group (infrared laser) was the best treatment in comparison to red and infrared led system.

Bridgeless SEPIC PFC Converter for Multistring LED Driver

NASA Astrophysics Data System (ADS)

Jha, Aman; Singh, Bhim

2018-05-01

This paper deals with Power Factor Correction (PFC) in Low Voltage High Current (LVHC) multi-string light emitting diode (LED) using a bridgeless (BL) single ended primary inductance converter (SEPIC). This application is designed for large area LED lighting with illumination control. A multi-mode LED dimming technique is used for the lighting control. The BL-SEPIC PFC converter is used as a load emulator for high power factor. The regulated low voltage from flyback converter is a source power to the synchronous buck converters for multi-string LED driver and forced cooling system for LED junction. The BL-SEPIC PFC converter inductor design is based on Discontinuous Inductor Current Modes (DICM) which provides good PFC at low cost. Test results are found quite satisfactory for universal input AC (90-265 V). There is significant improvement in the power factor and input current Total Harmonic Distortion (THD) with good margin of harmonic limits for lighting IEC 61000-3-2 Class C.

A randomized controlled trial of an online, modular, active learning training program for behavioral activation for depression.

PubMed

Puspitasari, Ajeng J; Kanter, Jonathan W; Busch, Andrew M; Leonard, Rachel; Dunsiger, Shira; Cahill, Shawn; Martell, Christopher; Koerner, Kelly

2017-08-01

This randomized-controlled trial assessed the efficacy of a trainer-led, active-learning, modular, online behavioral activation (BA) training program compared with a self-paced online BA training with the same modular content. Seventy-seven graduate students (M = 30.3 years, SD = 6.09; 76.6% female) in mental health training programs were randomly assigned to receive either the trainer-led or self-paced BA training. Both trainings consisted of 4 weekly sessions covering 4 core BA strategies. Primary outcomes were changes in BA skills as measured by an objective role-play assessment and self-reported use of BA strategies. Assessments were conducted at pre-, post-, and 6-weeks after training. A series of longitudinal mixed effect models assessed changes in BA skills and a longitudinal model implemented with generalized estimating equations assessed BA use over time. Significantly greater increases in total BA skills were found in the trainer-led training condition. The trainer-led training condition also showed greater increases in all core BA skills either at posttraining, follow-up, or both. Reported use of BA strategies with actual clients increased significantly from pre- to posttraining and maintained at follow-up in both training conditions. This trial adds to the literature on the efficacy of online training as a method to disseminate BA. Online training with an active learning, modular approach may be a promising and accessible implementation strategy. Additional strategies may need to be paired with the online BA training to assure the long-term implementation and sustainability of BA in clinical practice. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

A new spatial integration method for luminous flux determination of light-emitting diodes

NASA Astrophysics Data System (ADS)

Zhou, Xiaoli; Zhu, Shaolong; Shen, Haiping; Liu, Muqing

2010-10-01

Spatial integrated measurement using an integrating sphere is usually used for the luminous flux determination of light sources. Devices using an integrating sphere are bulky for use on a production assembly line. This paper proposes an alternative spatial integration method for accurately measuring the total luminous flux of light-emitting diodes (LEDs) having no backward emission. A compound parabolic concentrator is introduced to collect the light from an LED in conjunction with a detector which in turn measures the luminous flux. The study reported here combines both modeling and experiment to show the applicability of this novel method. The uncertainty in the measurements is then evaluated for the total luminous flux measurement from an LED.

Reverse leakage current characteristics of InGaN/GaN multiple quantum well ultraviolet/blue/green light-emitting diodes

NASA Astrophysics Data System (ADS)

Zhou, Shengjun; Lv, Jiajiang; Wu, Yini; Zhang, Yuan; Zheng, Chenju; Liu, Sheng

2018-05-01

We investigated the reverse leakage current characteristics of InGaN/GaN multiple quantum well (MQW) near-ultraviolet (NUV)/blue/green light-emitting diodes (LEDs). Experimental results showed that the NUV LED has the smallest reverse leakage current whereas the green LED has the largest. The reason is that the number of defects increases with increasing nominal indium content in InGaN/GaN MQWs. The mechanism of the reverse leakage current was analyzed by temperature-dependent current–voltage measurement and capacitance–voltage measurement. The reverse leakage currents of NUV/blue/green LEDs show similar conduction mechanisms: at low temperatures, the reverse leakage current of these LEDs is attributed to variable-range hopping (VRH) conduction; at high temperatures, the reverse leakage current of these LEDs is attributed to nearest-neighbor hopping (NNH) conduction, which is enhanced by the Poole–Frenkel effect.

Effect of red and blue light emitting diodes "CRB-LED" on in vitro organogenesis of date palm (Phoenix dactylifera L.) cv. Alshakr.

PubMed

Al-Mayahi, Ahmed Madi Waheed

2016-10-01

The objective of the present study is to determine the effect of light source on enhancement of shoot multiplication, phytochemicals, as well as, antioxidant enzyme activities of in vitro cultures of date palm cv. Alshakr. In vitro-grown buds were cultured on Murashige and Skoog (MS) medium and incubated under a conventional white fluorescent light (control), and combinations of red + blue light emitting diode (18:2) (CRB-LED). Results revealed that the treatment of CRB-LED showed a significant increase in the number of shoots compared with the white florescent light. Total soluble carbohydrate "TSCH" (7.10 mg g(-1) DW.), starch (1.63 mg g(-1) DW.) and free amino acids (2.90 mg g(-1) DW.) were significantly higher in CRB-LED (p < 0.05). Additionally, CRB-LED induced a higher peroxidase activity (25.50 U ml(-1)) compared with the white fluorescent light treatment (19.74 U ml(-1)) as control treatment. Potassium, magnesium and sodium contents in (3.62, 13.99 and 2.76 mg g(-1) DW.) were increased in in vitro shoots under CRB-LED treatment in comparison with fluorescent light (p < 0.05). Protein profile showed the appearance of newly bands with the molecular weight of 38 and 60 kDa at the treatment CRB-LED compared with control treatment. Our results demonstrate the positive effects of CRB-LED light during the course of date palm tissue cultures.

Independent variations of applied voltage and injection current for controlling the quantum-confined Stark effect in an InGaN/GaN quantum-well light-emitting diode.

PubMed

Chen, Horng-Shyang; Liu, Zhan Hui; Shih, Pei-Ying; Su, Chia-Ying; Chen, Chih-Yen; Lin, Chun-Han; Yao, Yu-Feng; Kiang, Yean-Woei; Yang, C C

2014-04-07

A reverse-biased voltage is applied to either device in the vertical configuration of two light-emitting diodes (LEDs) grown on patterned and flat Si (110) substrates with weak and strong quantum-confined Stark effects (QCSEs), respectively, in the InGaN/GaN quantum wells for independently controlling the applied voltage across and the injection current into the p-i-n junction in the lateral configuration of LED operation. The results show that more carrier supply is needed in the LED of weaker QCSE to produce a carrier screening effect for balancing the potential tilt in increasing the forward-biased voltage, when compared with the LED of stronger QCSE. The small spectral shift range in increasing injection current in the LED of weaker QCSE is attributed not only to the weaker QCSE, but also to its smaller device resistance such that a given increment of applied voltage leads to a larger increment of injection current. From a viewpoint of practical application in LED operation, by applying a reverse-biased voltage in the vertical configuration, the applied voltage and injection current in the lateral configuration can be independently controlled by adjusting the vertical voltage for keeping the emission spectral peak fixed.

Improving outcomes in adults with epilepsy and intellectual disability (EpAID) using a nurse-led intervention: study protocol for a cluster randomised controlled trial.

PubMed

Ring, Howard; Gilbert, Nakita; Hook, Roxanne; Platt, Adam; Smith, Christopher; Irvine, Fiona; Donaldson, Cam; Jones, Elizabeth; Kelly, Joanna; Mander, Adrian; Murphy, Caroline; Pennington, Mark; Pullen, Angela; Redley, Marcus; Rowe, Simon; Wason, James

2016-06-24

In adults with intellectual disability (ID) and epilepsy there are suggestions that improvements in management may follow introduction of epilepsy nurse-led care. However, this has not been tested in a definitive clinical trial and results cannot be generalised from general population studies as epilepsy tends to be more severe and to involve additional clinical comorbidities in adults with ID. This trial investigates whether nurses with expertise in epilepsy and ID, working proactively to a clinically defined role, can improve clinical and quality of life outcomes in the management of epilepsy within this population, compared to treatment as usual. The trial also aims to establish whether any perceived benefits represent good value for money. The EpAID clinical trial is a two-arm cluster randomised controlled trial of nurse-led epilepsy management versus treatment as usual. This trial aims to obtain follow-up data from 320 participants with ID and drug-resistant epilepsy. Participants are randomly assigned either to a 'treatment as usual' control or a 'defined epilepsy nurse role' active arm, according to the cluster site at which they are treated. The active intervention utilises the recently developed Learning Disability Epilepsy Specialist Nurse Competency Framework for adults with ID. Participants undergo 4 weeks of baseline data collection, followed by a minimum of 20 weeks intervention (novel treatment or treatment as usual), followed by 4 weeks of follow-up data collection. The primary outcome is seizure severity, including associated injuries and the level of distress manifest by the patient in the preceding 4 weeks. Secondary outcomes include cost-utility analysis, carer strain, seizure frequency and side effects. Descriptive measures include demographic and clinical descriptors of participants and clinical services in which they receive their epilepsy management. Qualitative study of clinical interactions and semi-structured interviews with clinicians and participants' carers are also undertaken. The EpAID clinical trial is the first cluster randomised controlled trial to test possible benefits of a nurse-led intervention in adults with epilepsy and ID. This research will have important implications for ID and epilepsy services. The challenges of undertaking such a trial in this population, and the approaches to meeting these are discussed. International Standard Randomised Controlled Trial Number: ISRCTN96895428 version 1.1. Registered on 26 March 2013.

Orbital experiment ``Gravisensor'': phototropic reactions of the moss Physcomitrella patens to different types of LED lighting.

NASA Astrophysics Data System (ADS)

Nikitin, Vladimir; Berkovich, Yuliy A.; Skripnikov, Alexander; Zyablova, Natalya; Mukhoyan, Makar; Emelianov, Grigory

The experiment was conducted on Russian Biological Satelite Bion-M #1 19.04-19.05 2013. Five transparent plastic cultural flasks were placed in five light isolated sections of Biocont-B2 cylindrical container with inner diameter of 120 mm and height of 230 mm. In four sections the flasks could be illuminated by top or side LED with wavelength of 458 nm, 630 nm, 730 nm, and white (color temperature 5000° K, peaks 453, 559 nm). Photon flux in each variant was 15 umol/(m2c). In the fifth section the flask with the shoots was in conditions of constant dark. Each section was equipped with its own video camera module. Cameras, video recorder and lighting were managed by micro controller. 12 days before launch, 5 tips of the moss shoots were explanted at each of the five flasks on the agar medium with nutrient components and were cultivated under white fluorescent lamps at 12 hour photo period till the launch. After entering the orbit and during next 14 days of flight top LEDs were turned on above the flasks. Then for the following 14 days of flight the side LEDs of similar wavelength were turned on. The moss gametophores were cultivated at 12-h photoperiod. During the experiment on an hourly basis a video recording of the moss was performed. Similar equipment was used for ground control. After the experiment video files were used to produce separate time-lapse films for each flask using AviSynth program. In flight the shoots demonstrated the maximum growth speed with far red lighting and slower speed with white lighting. With blue and red lighting after switching to side light stimuli the growth of shoots almost stopped. In the dark the shoots continued to grow until the 13 day after launch of the satellite, then their growth stopped. In ground control the relation of growth rate with various LEDs remained basically the same, with the exception of side blue lighting, where the shoots demonstrated considerable vertical growth. In flight the angle of inclination towards the light source was maximal (about 90º) with white lighting, and somewhat smaller with 730 nm. Under red and blue light the angle of phototropic inclination was difficult to measure due to poor growth of the shoots.In ground control the growth rate under blue light was several times higher, than in flight and final degree of inclination of the shoot tip came to about 10º. In ground control under side red lighting the growth was weak, while demonstrating a pronounced phototropic bend of 90º. In ground control in the dark a vertical growth of one shoot was observed with the rate somewhat larger, than in flight variant. Data on the dynamics of inclination of experimental and control plants are presented. The acquired data will be used to analyse the mechanisms of phototropic growth changes of moss shoots.

Modular Gravitational Reference Sensor (MGRS) For Astrophysics and Astronomy

NASA Astrophysics Data System (ADS)

Sun, Ke-Xun; Buchman, S.; Byer, R. L.; DeBra, D.; Goebel, J.; Allen, G.; Conklin, J.; Gerardi, D.; Higuchi, S.; Leindecker, N.; Lu, P.; Swank, A.; Torres, E.; Trillter, M.; Zoellner, A.

2009-01-01

The study of space-time for gravitational wave detection and cosmology beyond Einstein will be an important theme for astrophysics and astronomy in decades to come. Laser Interferometric Space Antenna (LISA) is designed for detecting gravitational wave in space. The Modular Gravitational Reference Sensor (MGRS) is developed as the next generation core instrument for space-time research, including gravitational wave detection beyond LISA, and an array of precision experiments in space. The MGRS provide a stable gravitational cardinal point in space-time by using a test sphere, which eliminates the need for orientation control, minimizing disturbances. The MGRS measures the space-time variation via a two step process: measurement between test mass and housing, and between housings of two spacecraft. Our Stanford group is conducting systematic research and development on the MGRS. Our initial objectives are to gain a system perspective of the MGRS, to develop component technologies, and to establish test platforms. We will review our recent progress in system technologies, optical displacement and angle sensing, diffractive optics, proof mass characterization, UV LED charge management system and space qualification, thermal control and sensor development. Some highlights of our recent results are: Demonstration of the extreme radiation hardness of UV LED which sustained 2 trillion protons per square centimeter; measurement of mass center offset down to 300 nm, and measurement of small angle 0.2 nrad per root hertz using a compact grating angular sensor. The Stanford MGRS program has made exceptional contribution to education of next generation scientists and engineers. We have undergraduate and graduate students in aeronautical and astronautic engineering, applied physics, cybernetics, electrical engineering, mechanical engineering, and physics. We have also housed a number of high school students in our labs for education and public outreach.

Nurse versus physician-led care for the management of asthma.

PubMed

Kuethe, Maarten C; Vaessen-Verberne, Anja A P H; Elbers, Roy G; Van Aalderen, Wim M C

2013-02-28

Asthma is the most common chronic disease in childhood and prevalence is also high in adulthood, thereby placing a considerable burden on healthcare resources. Therefore, effective asthma management is important to reduce morbidity and to optimise utilisation of healthcare facilities. To review the effectiveness of nurse-led asthma care provided by a specialised asthma nurse, a nurse practitioner, a physician assistant or an otherwise specifically trained nursing professional, working relatively independently from a physician, compared to traditional care provided by a physician. Our scope included all outpatient care for asthma, both in primary care and in hospital settings. We carried out a comprehensive search of databases including The Cochrane Library, MEDLINE and EMBASE to identify trials up to August 2012. Bibliographies of relevant papers were searched, and handsearching of relevant publications was undertaken to identify additional trials. Randomised controlled trials comparing nurse-led care versus physician-led care in asthma for the same aspect of asthma care. We used standard methodological procedures expected by The Cochrane Collaboration. Five studies on 588 adults and children were included concerning nurse-led care versus physician-led care. One study included 154 patients with uncontrolled asthma, while the other four studies including 434 patients with controlled or partly controlled asthma. The studies were of good methodological quality (although it is not possible to blind people giving or receiving the intervention to which group they are in). There was no statistically significant difference in the number of asthma exacerbations and asthma severity after treatment (duration of follow-up from six months to two years). Only one study had healthcare costs as an outcome parameter, no statistical differences were found. Although not a primary outcome, quality of life is a patient-important outcome and in the three trials on 380 subjects that reported on this outcome, there was no statistically significant difference (standardised mean difference (SMD) -0.03; 95% confidence interval (CI) -0.23 to 0.17). We found no significant difference between nurse-led care for patients with asthma compared to physician-led care for the outcomes assessed. Based on the relatively small number of studies in this review, nurse-led care may be appropriate in patients with well-controlled asthma. More studies in varied settings and among people with varying levels of asthma control are needed with data on adverse events and health-care costs.

Feasibility of utilising an all-volunteer workforce as a disruptive innovation for the US obesity epidemic.

PubMed

Kraschnewski, Jennifer L; Hwang, Kevin O; George, Daniel R; Lehman, Erik B; Sciamanna, Christopher N

2014-01-01

As the prevalence of obesity in US adults continues to increase, addressing weight control will require an effective, lower-cost intervention. A model for delivering free peer-to-peer counselling has the potential to create a paradigm shift in the way weight and other chronic illnesses are addressed in the US. The objective of this study is to understand the potential for utilising successful peer volunteers as counsellors in weight control programmes and as a possible intervention strategy to address the global obesity epidemic in a cost-effective manner. This cross-sectional study surveyed a nationwide panel of US adults (n=806) in 2010. We created survey items to identify participant interest in three specific types of weight control programmes: a free programme led by successful peers, a paid programme led by successful peers and a programme led by trained paid professionals. Statistical analysis was conducted in 2011. Logistic regression was used to adjust for the effect of potential confounders on participant interest in different weight control programmes and willingness to volunteer. More than three times as many subjects (27.4% vs. 8.3%) were interested in the free peer-led programme versus the expert-led paid option. Of participants who had ever had successful weight loss, 15% were interested in volunteering to help others lose weight. Individuals appear to be willing to both attend and conduct peer volunteer-led weight control groups. Further research is necessary to develop and test interventions to assess the effectiveness of such interventions. Copyright © 2014 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Exploring the costs and outcomes of sexually transmitted infection (STI) screening interventions targeting men in football club settings: preliminary cost-consequence analysis of the SPORTSMART pilot randomised controlled trial

PubMed Central

Jackson, Louise J; Roberts, Tracy E; Fuller, Sebastian S; Sutcliffe, Lorna J; Saunders, John M; Copas, Andrew J; Mercer, Catherine H; Cassell, Jackie A; Estcourt, Claudia S

2015-01-01

Background The objective of this study was to compare the costs and outcomes of two sexually transmitted infection (STI) screening interventions targeted at men in football club settings in England, including screening promoted by team captains. Methods A comparison of costs and outcomes was undertaken alongside a pilot cluster randomised control trial involving three trial arms: (1) captain-led and poster STI screening promotion; (2) sexual health advisor-led and poster STI screening promotion and (3) poster-only STI screening promotion (control/comparator). For all study arms, resource use and cost data were collected prospectively. Results There was considerable variation in uptake rates between clubs, but results were broadly comparable across study arms with 50% of men accepting the screening offer in the captain-led arm, 67% in the sexual health advisor-led arm and 61% in the poster-only control arm. The overall costs associated with the intervention arms were similar. The average cost per player tested was comparable, with the average cost per player tested for the captain-led promotion estimated to be £88.99 compared with £88.33 for the sexual health advisor-led promotion and £81.87 for the poster-only (control) arm. Conclusions Costs and outcomes were similar across intervention arms. The target sample size was not achieved, and we found a greater than anticipated variability between clubs in the acceptability of screening, which limited our ability to estimate acceptability for intervention arms. Further evidence is needed about the public health benefits associated with screening interventions in non-clinical settings so that their cost-effectiveness can be fully evaluated. PMID:25512670

Effect of different wavelengths of light on the antioxidant and immunity status of juvenile rock bream, Oplegnathus fasciatus, exposed to thermal stress

NASA Astrophysics Data System (ADS)

Choe, Jong Ryeol; Shin, Yoon Sub; Choi, Ji Yong; Kim, Tae Hwan; Jung, Min-Min; Choi, Cheol Young

2017-12-01

We investigated the effect of light wavelengths on antioxidant and immunity parameters in juvenile rock bream, Oplegnathus fasciatus, exposed to thermal stress (25 and 30°C). We exposed the fish to light emitting diodes (LEDs) emitting green (520 nm) and red light (630 nm) of 0.25 and 0.5 W/m2 intensity, and measured the activity, and mRNA and protein expression levels of the antioxidant enzymes, superoxide dismutase, catalase, and glutathione peroxidase. We also determined the levels of plasma hydrogen peroxide (H2O2), melatonin, and lysozyme. Furthermore, the mRNA and protein levels of caspase-3 were measured and terminal transferase dUTP nick end labeling (TUNEL) assays were performed. We observed that mRNA expression and activities of antioxidant enzymes and plasma H2O2 levels were significantly higher after exposure to high temperatures. However, increases in these parameters were significantly lower after exposure to green LED light. The plasma melatonin and lysozyme levels were significantly lower in the different groups after exposure to high temperatures; however, in groups exposed to green LED light, their levels were significantly higher than those in the control group. The expression pattern of caspase-3 mRNA was similar to that of H2O2. The TUNEL assay showed that apoptosis was markedly higher at higher water temperatures than that at 20°C. These results indicate that high water temperatures induce oxidative stress and decrease the immunity in juvenile rock bream but green LED light inhibits the rise in oxidative stress and combats the decrease in immunity and should, thus, be useful in the culture of rock bream.

Entomological aspects of filariasis control in Sri Lanka

PubMed Central

Lambrecht, F. L.

1974-01-01

Historical events and suitable environmental conditions in the southwestern coastal areas of Sri Lanka have led to the establishment of a zone of endemic filariasis caused by Wuchereria bancrofti and transmitted by Culex pipiens fatigans. The previous Brugia malayi foci, scattered over widely dispersed areas of the island, were apparently completely eliminated as a result of control of the Mansonia vectors by the destruction of the larval host plants in their swamp habitats. Control measures by the Anti-Filariasis Campaign against W. bancrofti and C. p. fatigans have greatly reduced the human infection rates in the endemic coastal belt and have kept the rate in the dense population to less than 1% over the last several years. This paper assesses the entomological aspects of the control programme during the years 1970-72. PMID:4619057

Interface control of bulk ferroelectric polarization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, P; Luo, Weidong; Yi, D.

2012-01-01

The control of material interfaces at the atomic level has led to no- vel interfacial properties and functionalities. In particular, the study of polar discontinuities at interfaces between complex oxides lies at the frontier of modern condensed matter research. Here we em- ploy a combination of experimental measurements and theoretical calculations to demonstrate the control of a bulk property, namely ferroelectric polarization, of a heteroepitaxial bilayer by precise atomic-scale interface engineering. More specifically, the control is achieved by exploiting the interfacial valence mismatch to influence the electrostatic potential step across the interface, which manifests itself as the biased-voltage in ferroelectricmore » hysteresis loops and determines the ferroelectric state. A broad study of diverse systems comprising different ferroelectrics and conducting perovskite un- derlayers extends the generality of this phenomenon.« less

Nurse-led hypnotherapy: an innovative approach to Irritable Bowel Syndrome.

PubMed

Bremner, Helen

2013-08-01

Irritable Bowel Syndrome (IBS) is a common, chronic functional illness, which can greatly reduce patients' quality of life, and consumes healthcare resources. Standard treatments include dietary changes and medication, though these are often ineffective. Clinical studies of hypnotherapy demonstrate improvement in symptoms and quality of life in over 80% of subjects with intractable IBS. Our experience of a nurse-led hypnotherapy service for IBS in a community setting provides evidence of comparable efficacy for symptom control, improved quality of life, reduced dependence on medication and improved general health measures. We address the challenges of setting up and maintaining the service in a changing healthcare environment. This model of care could act as a template for providers of gastroenterology and functional disease services wishing to provide IBS care. Copyright © 2013 Elsevier Ltd. All rights reserved.

Catchment-scale stormwater management via economic incentives – An overview and lessons-learned

USGS Publications Warehouse

Schuster, W.; Garmestani, A.S.; Green, O.O.; Rhea, l.K.; Roy, Allison; Thurston, H.W.; Myers, Baden Robert; Beecham, Simon; Lucke, Terry; Boogaard, Floris

2013-01-01

Long-term field studies of the effectiveness and sustainability of decentralized stormwater management are rare. From 2005-2011, we tested an incentive-based approach to citizen participation in stormwater management in the Shepherd Creek catchment, located in Cincinnati, OH, USA. Hydrologic, biological, and water quality data were characterized in a baseline monitoring effort 2005- 2007. Reverse auctions held successively in 2007 and 2008 engaged citizens to voluntarily bid on stormwater control measures (SCMs); and successful bids led to implementation of SCMs, which led to an enhancement of catchment detention capacity. We tested for attributes of sustainability (coconsideration of social, economic, and environmental (hydrologic, soils, aquatic biology) aspects), and summarize lessons-learned. Our results and outcomes provide a basis for planning future field studies that more fully determine the effectiveness of stormwater management in terms of sustainability.

Operating scheme for the light-emitting diode array of a volumetric display that exhibits multiple full-color dynamic images

NASA Astrophysics Data System (ADS)

Hirayama, Ryuji; Shiraki, Atsushi; Nakayama, Hirotaka; Kakue, Takashi; Shimobaba, Tomoyoshi; Ito, Tomoyoshi

2017-07-01

We designed and developed a control circuit for a three-dimensional (3-D) light-emitting diode (LED) array to be used in volumetric displays exhibiting full-color dynamic 3-D images. The circuit was implemented on a field-programmable gate array; therefore, pulse-width modulation, which requires high-speed processing, could be operated in real time. We experimentally evaluated the developed system by measuring the luminance of an LED with varying input and confirmed that the system works appropriately. In addition, we demonstrated that the volumetric display exhibits different full-color dynamic two-dimensional images in two orthogonal directions. Each of the exhibited images could be obtained only from the prescribed viewpoint. Such directional characteristics of the system are beneficial for applications, including digital signage, security systems, art, and amusement.

The White-test helps to reduce biliary leakage in liver resection: a systematic review and meta-analysis.

PubMed

Linke, Richard; Ulrich, Frank; Bechstein, Wolf O; Schnitzbauer, Andreas A

2015-01-01

Bile leakage testing may help to detect and reduce the incidence of biliary leakage after hepatic resection. This review was performed to investigate the value of the White-test in identifying intraoperative biliary leakage and avoiding postoperative leakage. A systematic review and meta-analysis was performed. Two researchers performed literature research. Primary outcome measure was the incidence of post-hepatectomy biliary leakage; secondary outcome measure was the ability of detecting intraoperative biliary leakage with the help of the White-test. A total of 4 publications (including original data from our center) were included in the analysis. Evidence levels of the included studies had medium quality of 2b (individual cohort studies including low quality randomized controlled trials). Use of the White-test led to a significant reduction of post-operative biliary leakage [OR: 0.3 (95% CI: 0.14, 0.63), p = 0.002] and led to a significant higher intraoperative detection of biliary leakages [OR: 0.03 (95%CI: 0.02, 0.07), p < 0.00001]. Existing evidence implicates the use of the White-test after hepatic resection to identify bile leaks intraoperatively and thus reduce incidence of post-operative biliary leakage. Nonetheless, there is a requirement for a high-quality randomized controlled trial with adequately powered sample-size to confirm findings from the above described studies and further increase evidence in this field.

A UV LED-based Charge Management System for LISA

NASA Astrophysics Data System (ADS)

Conklin, John W.; Chilton, Andrew; Olatunde, Taiwo Janet; Apple, Stephen; Parry, Samantha; Ciani, Giacomo; Wass, Peter; Mueller, Guido

2018-01-01

The Laser Interferometer Space Antenna (LISA) will be the first space instrument to observe gravitational waves in the millihertz frequency band. LISA consists of three Sun-orbiting spacecraft that form an equilateral triangle, with each side measuring 2.5 million kilometers in length. Each spacecraft houses two free-floating test masses, which are protected from all disturbing forces so that they follow pure geodesics in spacetime. A drag-free control system commands micronewton thrusters to force the spacecraft to fly in formation with the test masses and laser interferometers measure the minute variations in the distance, or light travel time, between these free-falling test masses caused by gravitational waves. The LISA observatory, with a planned launch in the early 2030s, is led by the European Space Agency with significant contributions from NASA. Recently, NASA has initiated strategic investments in key LISA technologies that will likely become U.S. flight hardware contributions to this ground-breaking mission. One of these payload elements is the Charge Management System (CMS), which controls the electric potential of the test masses relative to their housings to reduce spurious force noise acting on the test masses to below the required level. This talk, presented by University of Florida team that leads the CMS development, will describe this vital U.S. contribution to the LISA mission in the context of the envisioned LISA payload architecture and its in-flight sensitivity to gravitational waves.

White light emission of monolithic InGaN/GaN grown on morphology-controlled, nanostructured GaN templates.

PubMed

Song, Keun Man; Kim, Do-Hyun; Kim, Jong-Min; Cho, Chu-Young; Choi, Jehyuk; Kim, Kahee; Park, Jinsup; Kim, Hogyoug

2017-06-02

We demonstrated an InGaN/GaN-based, monolithic, white light-emitting diode (LED) without phosphors by using morphology-controlled active layers formed on multi-facet GaN templates containing polar and semipolar surfaces. The nanostructured surface morphology was controlled by changing the growth time, and distinct multiple photoluminescence peaks were observed at 360, 460, and 560 nm; these features were caused by InGaN/GaN-based multiple quantum wells (MQWs) on the nanostructured facets. The origin of each multi-peak was related to the different indium (In) compositions in the different planes of the quantum wells grown on the nanostructured GaN. The emitting units of MQWs in the LED structures were continuously connected, which is different from other GaN-based nanorod or nanowire LEDs. Therefore, the suggested structure had a larger active area. From the electroluminescence spectrum of the fabricated LED, monolithic white light emission with CIE color coordinates of x = 0.306 and y = 0.333 was achieved via multi-facet control combined with morphology control of the metal organic chemical vapor deposition-selective area growth of InGaN/GaN MQWs.

White light emission of monolithic InGaN/GaN grown on morphology-controlled, nanostructured GaN templates

NASA Astrophysics Data System (ADS)

Song, Keun Man; Kim, Do-Hyun; Kim, Jong-Min; Cho, Chu-Young; Choi, Jehyuk; Kim, Kahee; Park, Jinsup; Kim, Hogyoug

2017-06-01

We demonstrated an InGaN/GaN-based, monolithic, white light-emitting diode (LED) without phosphors by using morphology-controlled active layers formed on multi-facet GaN templates containing polar and semipolar surfaces. The nanostructured surface morphology was controlled by changing the growth time, and distinct multiple photoluminescence peaks were observed at 360, 460, and 560 nm; these features were caused by InGaN/GaN-based multiple quantum wells (MQWs) on the nanostructured facets. The origin of each multi-peak was related to the different indium (In) compositions in the different planes of the quantum wells grown on the nanostructured GaN. The emitting units of MQWs in the LED structures were continuously connected, which is different from other GaN-based nanorod or nanowire LEDs. Therefore, the suggested structure had a larger active area. From the electroluminescence spectrum of the fabricated LED, monolithic white light emission with CIE color coordinates of x = 0.306 and y = 0.333 was achieved via multi-facet control combined with morphology control of the metal organic chemical vapor deposition-selective area growth of InGaN/GaN MQWs.

Combined experimental-numerical identification of radiative transfer coefficients in white LED phosphor layers

NASA Astrophysics Data System (ADS)

Akolkar, A.; Petrasch, J.; Finck, S.; Rahmatian, N.

2018-02-01

An inverse analysis of the phosphor layer of a commercially available, conformally coated, white LED is done based on tomographic and spectrometric measurements. The aim is to determine the radiative transfer coefficients of the phosphor layer from the measurements of the finished device, with minimal assumptions regarding the composition of the phosphor layer. These results can be used for subsequent opto-thermal modelling and optimization of the device. For this purpose, multiple integrating sphere and gonioradiometric measurements are done to obtain statistical bounds on spectral radiometric values and angular color distributions for ten LEDs belonging to the same color bin of the product series. Tomographic measurements of the LED package are used to generate a tetrahedral grid of the 3D LED geometry. A radiative transfer model using Monte Carlo Ray Tracing in the tetrahedral grid is developed. Using a two-wavelength model consisting of a blue emission wavelength and a yellow, Stokes-shifted re-emission wavelength, the angular color distribution of the LED is simulated over wide ranges of the absorption and scattering coefficients of the phosphor layer, for the blue and yellow wavelengths. Using a two-step, iterative space search, combinations of the radiative transfer coefficients are obtained for which the simulations are consistent with the integrating sphere and gonioradiometric measurements. The results show an inverse relationship between the scattering and absorption coefficients of the phosphor layer for blue light. Scattering of yellow light acts as a distribution and loss mechanism for yellow light and affects the shape of the angular color distribution significantly, especially at larger viewing angles. The spread of feasible coefficients indicates that measured optical behavior of the LEDs may be reproduced using a range of combinations of radiative coefficients. Given that coefficients predicted by the Mie theory usually must be corrected in order to reproduce experimental results, these results indicate that a more complete model of radiative transfer in phosphor layers is required.

Optical CAD Utilization for the Design and Testing of a LED Streetlamp.

PubMed

Jafrancesco, David; Mercatelli, Luca; Fontani, Daniela; Sansoni, Paola

2017-08-24

The design and testing of LED lamps are vital steps toward broader use of LED lighting for outdoor illumination and traffic signalling. The characteristics of LED sources, in combination with the need to limit light pollution and power consumption, require a precise optical design. In particular, in every step of the process, it is important to closely compare theoretical or simulated results with measured data (obtained from a prototype). This work examines the various possibilities for using an optical CAD (Lambda Research TracePro ) to design and check a LED lamp for outdoor use. This analysis includes the simulations and testing on a prototype as an example; data acquired by measurement are inserted into the same simulation software, making it easy to compare theoretical and actual results.

Improved LED backlight with unique color and intensity control and NVIS capability

NASA Astrophysics Data System (ADS)

Herman, Robert; Zagar, Pete; Ulijasz, Ted; Hansen, Hans C.; Ellner, Fred

2006-05-01

Currently deployed conventional flat panel AMLCD displays employ fluorescent lamp backlights to achieve the required lighting levels for cockpits in high performance aircraft. Advances have been made in backlighting technology by replacing fluorescent lamps with high performance LEDs. However, these new LED-based backlights are lacking in control of color and luminance intensity especially when related to NVIS requirements in a cockpit. This paper describes a unique integration of LED, electronic, and optical components to meet the requirements of high performance aircraft over their extreme range of operating environments. The LED-based backlight utilizes state-of-art components to enable daylight, night, and NVIS requirements to be implemented in a simple cost-effective package. The performance results presented highlight the advantages of this new design when compared to currently available backlighting designs. Techniques as described in section 2 of this paper are covered under patent application to the US and International Patent Offices.

Home-based diabetes self-management coaching delivered by paraprofessionals: A randomized controlled trial.

PubMed

Pauley, Tim; Gargaro, Judith; Chenard, Glen; Cavanagh, Helen; McKay, Sandra M

2016-01-01

This study evaluated paraprofessional-led diabetes self-management coaching (DSMC) among 94 clients with type 2 diabetes recruited from a Community Care Access Centre in Ontario, Canada. Subjects were randomized to standard care or standard care plus coaching. Measures included the Diabetes Self-Efficacy Scale (DSES), Insulin Management Diabetes Self-Efficacy Scale (IMDSES), and Hospital Anxiety and Depression Scale (HADS). Both groups showed improvement in DSES (6.6 + 1.5 vs. 7.2 + 1.5, p < .001) and IMDSES (113.5 + 20.6 vs. 125.7 + 22.3, p < .001); there were no between-groups differences. There were no between-groups differences in anxiety (p > .05 for all) or depression scores (p > .05 for all), or anxiety (p > .05 for all) or depression (p > .05 for all) categories at baseline, postintervention, or follow-up. While all subjects demonstrated significant improvements in self-efficacy measures, there is no evidence to support paraprofessional-led DSMC as an intervention which conveys additional benefits over standard care.

Use of group quarantine in Ebola control - Nigeria, 2014.

PubMed

Grigg, Cheri; Waziri, Ndadilnasiya E; Olayinka, Adebola T; Vertefeuille, John F

2015-02-13

On July 20, 2014, the first known case of Ebola virus disease (Ebola) in Nigeria, in a traveler from Liberia, led to an outbreak that was successfully curtailed with infection control, contact tracing, isolation, and quarantine measures coordinated through an incident management system. During this outbreak, most contacts underwent home monitoring, which included instructions to stay home or to avoid crowded areas if staying home was not possible. However, for five contacts with high-risk exposures, group quarantine in an observation unit was preferred because the five had crowded home environments or occupations that could have resulted in a large number of community exposures if they developed Ebola.

Failure Analysis of Fractured Poppet from Space Shuttle Orbiter Flow Control Valve

NASA Technical Reports Server (NTRS)

Russell, Richard

2010-01-01

This slide presentation reviews the failure analysis of a fractured poppet from a flow control valve (FCV) used on the space shuttle. This presentation has focused on the laboratory analysis of the failed hardware. The use of Scanning electron fractography during the investigation led to the conclusion that the poppet failed due to fatigue cracking that, most likely, occurred under changing loading conditions. The initial investigation led to a more thorough test of poppets that had been retired, this testing led to the conclusion that the thumbnail cracks in the flight hardware had existed for the life of the shuttle program. This led to a program to develop an eddy current technique that was capable of detecting small very tight cracks.

Nurse-led cognitive-behavioral group therapy for recovery of self-esteem in patients with mental disorders: A pilot study.

PubMed

Kunikata, Hiroko; Yoshinaga, Naoki; Shiraishi, Yuko; Okada, Yoshie

2016-07-01

To design a program targeting recovery of self-esteem in patients with mental disorders, and to clarify the changes after the program to determine its effectiveness. This study employed a one group pre- and post design, which comprised baseline, post-intervention, and 3 month follow-up phases, and recruited 41 Japanese patients with mental disorders living in the community. The authors administered the nurse-led group cognitive-behavioral therapy program for the recovery of self-esteem, which comprised 12 sessions, to the participants. The follow-up investigations were conducted immediately and 3 months after the program. The present authors used the Rosenberg Self-Esteem Scale (RSES), Profile of Mood States (POMS), Subjective Well-Being Inventory (SUBI), and Test to Determine the Characteristics of Ideas as subjective measures and the Brief Psychiatric Rating Scale (BPRS) as an objective measure. After controlling for the factors of medication and use of social services, improvement was observed in all measures of evaluation. The authors identified improvement at post-intervention and follow up. The scores for the RSES, BPRS, confidence in coping, and inadequate mental mastery at post-intervention and follow up were significantly higher than those at baseline, and these beneficial effects were maintained 3 months after the program. The program may aid in recovering and maintaining self-esteem of patients suffering from mental disorders. However, it is necessary to conduct a randomized controlled clinical trial to confirm these findings. © 2016 Japan Academy of Nursing Science.

The price of a drink: the potential of alcohol minimum unit pricing as a public health measure in the UK.

PubMed

Rice, Peter; Drummond, Colin

2012-09-01

The UK has seen a dramatic increase in alcohol consumption and alcohol-related harm over the past 30 years. Alcohol taxation has long been considered a key method of controlling alcohol-related harm but a combination of factors has recently led to consideration of methods which affect the price of the cheapest alcohol as a means of improved targeting of alcohol control measures to curb the consumption of the heaviest drinkers. Although much of the evidence in favour of setting a minimum price of a unit of alcohol is based on complex econometric models rather than empirical data, all jurisdictions within the UK now intend to make selling alcohol below a set price illegal, which will provide a naturalistic experiment allowing assessment of the impact of minimum pricing.

LED-CE-DOAS measurements of NO2: intercomparison with CaRDS

NASA Astrophysics Data System (ADS)

Thalman, R. M.; Washenfelder, R.; Brown, S. S.; Volkamer, R.

2009-04-01

The combination of cavity enhanced absorption spectroscopy (CEAS) with Light Emitting Diode (LED) light sources lends itself to the application of the well established Differential Optical Absorption Spectroscopy (DOAS) technique (LED-CE-DOAS). In contrast to other broad band CEAS (BB-CEAS) techniques, CE-DOAS relies only on the measurement of relative intensity changes, i.e., does not require knowledge of the light intensity in the absence of trace gases (I0). With CE-DOAS there is no necessity for sampling lines to supply air samples into a cavity, or filters to remove aerosols from the airstream, as measurements are possible in a cavity that can be open to the atmosphere. A novel LED-CE-DOAS instrument was built at CU Boulder for the sensitive and selective detection of nitrogen dioxide (NO2), glyoxal (CHOCHO), iodine oxide (IO), water, and oxygen dimers (O4). CU Boulder's LED-CE-DOAS instrument was collocated to NOAA's NO2 Cavity Ring Down (CaRDS) instrument to test different CE-DOAS data retrieval algorithms for NO2 and O4. Both instruments were collocated to sample known NO2 concentrations from the same gas manifold, and to sample atmospheric air in a parking lot. This contribution focuses on the instrument components, challenges and means to retrieve quantitative concentrations of NO2 by LED-CE-DOAS, i.e., the distortion of NO2 and O4 absorption features due to different effective path lengths induced by (1) changes in the mirror reflectivity with wavelength, and (2) changes in light extinction across the absorption bands due to differential trace gas absorption features. We demonstrate that simultaneous measurements of O4 and NO2 enable to characterize the effective pathlength in the absence and presence of NO2 and perform absolute measurements based only on relative intensity measurements. To our knowledge these are the first CEAS measurements that rely solely on relative intensity measurements.

Phototherapy with blue and green mixed-light is as effective against unconjugated jaundice as blue light and reduces oxidative stress in the Gunn rat model.

PubMed

Uchida, Yumiko; Morimoto, Yukihiro; Uchiike, Takao; Kamamoto, Tomoyuki; Hayashi, Tamaki; Arai, Ikuyo; Nishikubo, Toshiya; Takahashi, Yukihiro

2015-07-01

Phototherapy using blue light-emitting diodes (LED) is effective against neonatal jaundice. However, green light phototherapy also reduces unconjugated jaundice. We aimed to determine whether mixed blue and green light can relieve jaundice with minimal oxidative stress as effectively as either blue or green light alone in a rat model. Gunn rats were exposed to phototherapy with blue (420-520 nm), filtered blue (FB; 440-520 nm without<440-nm wavelengths, FB50 (half the irradiance of filtered blue), mixed (filtered 50% blue and 50% green), and green (490-590 nm) LED irradiation for 24h. The effects of phototherapy are expressed as ratios of serum total (TB) and unbound (UB) bilirubin before and after exposure to each LED. Urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG) was measured by HPLC before and after exposure to each LED to determine photo-oxidative stress. Values < 1.00 indicate effective phototherapy. The ratios of TB and UB were decreased to 0.85, 0.89, 1.07, 0.90, and 1.04, and 0.85, 0.94, 0.93, 0.89, and 1.09 after exposure to blue, filtered blue, FB50, and filtered blue mixed with green LED, respectively. In contrast, urinary 8-OHdG increased to 2.03, 1.25, 0.96, 1.36, 1.31, and 1.23 after exposure to blue, filtered blue, FB50, mixed, green LED, and control, indicating side-effects (> 1.00), respectively. Blue plus green phototherapy is as effective as blue phototherapy and it attenuates irradiation-induced oxidative stress. Combined blue and green spectra might be effective against neonatal hyperbilirubinemia. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

ED08-0016-20

NASA Image and Video Library

2008-01-17

NASA engineer Larry Hudson and Ikhana ground crew member James Smith work on a ground validation test with new fiber optic sensors that led to validation flights on the Ikhana aircraft. NASA Dryden Flight Research Center is evaluating an advanced fiber optic-based sensing technology installed on the wings of NASA's Ikhana aircraft. The fiber optic system measures and displays the shape of the aircraft's wings in flight. There are other potential safety applications for the technology, such as vehicle structural health monitoring. If an aircraft structure can be monitored with sensors and a computer can manipulate flight control surfaces to compensate for stresses on the wings, structural control can be established to prevent situations that might otherwise result in a loss of control.

Control of zoonotic cutaneous leishmaniasis vector, Phlebotomus papatasi, using attractive toxic sugar baits (ATSB)

PubMed Central

Saghafipour, Abedin; Vatandoost, Hassan; Zahraei-Ramazani, Ali Reza; Yaghoobi-Ershadi, Mohammad Reza; Rassi, Yavar; Karami Jooshin, Moharram; Shirzadi, Mohammad Reza; Akhavan, Amir Ahmad

2017-01-01

Introduction Attractive Toxic Sugar Baits (ATSB) is a new vector control method that meets Integrated Vector Management (IVM) goals. In an experimental design, this study aimed to determine effects of ATSB on control of Phlebotomus papatasi, as a main vector of Zoonotic Cutaneous Leishmaniasis (ZCL), in Qom Province, center of Iran. Methods In a cross-sectional design, boric acid was mixed with brown sugar solution and tested as toxic baits for P. papatasi. Two methods were utilized to use the baits: (a) spraying ATSB on vegetation, bushes, and shrubs; and (b) setting ATSB-treated barrier fences in front of colonies at 500 m distance from the houses in outskirts of villages. In order to examine the residual efficacy rate of ATSB-treated barrier fences, the bioassay test was used. Density of P. papatasi sandflies was measured using sticky and light traps biweekly. For data analysis, Mann-Whitney U Test and Kruskal-Wallis were used. Results ATSB-treated barrier fences led to 3 times reduction in P. papatasi population. Besides that, ATSB spraying on plants led to more than 5 times reduction in P. papatasi population. Conclusions Comparing the incidence of leishmaniasis in treated villages before and after the study showed that the incidence was statistically reduced. Therefore, ATSB is an effective method to control vectors and prevent leishmaniasis. PMID:28426679

Physiological and genetic characterization of plant growth and gravitropism in LED light sources

NASA Technical Reports Server (NTRS)

Deitzer, Gerald F.

1994-01-01

Among the many problems of growing plants in completely controlled environments, such as those anticipated for the space station and the CELSS program, is the need to provide light that is both adequate for photosynthesis and of proper quality for normal growth and development. NASA scientists and engineers have recently become interested in the possibility of utilizing densely packed, solid state, light emitting diodes (LED's) as a source for this light. Unlike more conventional incandescent or electrical discharge lamps, these sources are highly monochromatic and lack energy in spectral regions thought to be important for normal plant development. In addition, a recent observation by NASA scientist has suggested that infra-red LED's, that are routinely used as photographic safelights for plants grown in darkness, may interact with the ability of plants to detect gravity. In order to establish how plants respond to light from these LED light sources we carried out a series of experiments with known pigment mutants of the model mustard plant, Arabidopsis thaliana, growing in either a gravity field or on a clinostat to simulate a micro-gravity environment. Results indicate that only red light from the 665 nm LED's disrupts the ability of normal wildtype seedlings to detect a gravity stimulus. There was no consistent effect found for the far-red (735 nm) LED's or either of the infrared (880 nm or 935 nm) LED sources but both showed some effect in one or more of the genotypes tested. Of these five members of the phytochrome multigene family in Arabidopsis, only the phytochrome B pigment mutant (hy3) lacked the ability to detect gravity under all conditions. There was no effect of either micro-gravity (clinostat) or the infra-red LED's on the light induced inhibition of hypocotyl elongation. Measurements of the pigment phytochrome in oats also showed no photoconversion by 15 min irradiations with the infra-red LED's. We conclude that phytochrome B is required for the perception of gravity and that only red light is able to disrupt this perception. The infra-red LED's also do not appear to interact with gravity perception in Arabidopsis, but caution should be exercised if infra-red LED's are to be used as photographic safelights for these types of experiments.

Interactive effect of light colours and temporal synergism of circadian neural oscillations in reproductive regulation of Japanese quail.

PubMed

Yadav, Suneeta; Chaturvedi, Chandra Mohini

2016-09-01

Avian literature reports the modulation of 'photoperiodic gonadal responses' by the temporal phase relation of serotonergic and dopaminergic oscillations in Japanese quail. But, the modulation of 'light colour responses' by the temporal synergism of neural oscillations is not yet known. Hence the present study was designed to investigate the interaction of the light colour (blue, red) and the phase relation of neural oscillations in the reproductive regulation of Japanese quail. Three week old male Japanese quail were divided into two groups and maintained under a long day length condition (16L:8D) and were exposed to a 30 lux intensity of blue LED (light emitting diode) (B LED) and a red LED light (R LED). At the age of 15.5weeks, quail of one subgroup of B LED were injected with serotonin precursor (5-HTP) and dopamine precursor (l-DOPA) 12hrs apart (B LED+12-hr) and those of the R LED group were injected with the same drugs (5mg/100g body weight over a period of thirteen days) but 8hrs apart (R LED+8-hr). The remaining subgroups of both the light colour groups (B LED & R LED) received normal saline twice daily and served as controls. Cloacal gland volume was recorded weekly until 35.5weeks of age when the study was terminated and reproductive parameters (testicular volume, GSI, seminiferous tubule diameter and plasma testosterone) were assessed. Results indicate that the 8-hr temporal phase relation of neural oscillations suppresses reproductive activity even during the photosensitive phase of the red light exposed quail (R LED+8-hr) compare to the R LED controls. On the other hand, the 12-hr temporal phase relation stimulates the gonadal development of the B LED+12-hr quail compared to the B LED controls which after completing one cycle entered into a regressive phase and remained sexually quiescent. These experiments suggest that the temporal phase relations of circadian neural oscillations, in addition to modulating the classical photoperiodic responses, may also modulate the gonadal responses to blue (suppressive) and red (stimulatory) light. These studies led us to conclude that the temporal phase relation of serotonergic and dopaminergic oscillations is not only an important regulator of avian reproduction but may also override the classical effects of light colours in Japanese quail. Copyright © 2016 Elsevier B.V. All rights reserved.

Improved breakdown characteristics of monolithically integrated III-nitride HEMT-LED devices using carbon doping

NASA Astrophysics Data System (ADS)

Liu, Chao; Liu, Zhaojun; Huang, Tongde; Ma, Jun; May Lau, Kei

2015-03-01

We report selective growth of AlGaN/GaN high electron mobility transistors (HEMTs) on InGaN/GaN light emitting diodes (LEDs) for monolithic integration of III-nitride HEMT and LED devices (HEMT-LED). To improve the breakdown characteristics of the integrated HEMT-LED devices, carbon doping was introduced in the HEMT buffer by controlling the growth pressure and V/III ratio. The breakdown voltage of the fabricated HEMTs grown on LEDs was enhanced, without degradation of the HEMT DC performance. The improved breakdown characteristics can be attributed to better isolation of the HEMT from the underlying conductive p-GaN layer of the LED structure.

Interventions aimed at increasing research use in nursing: a systematic review

PubMed Central

Thompson, David S; Estabrooks, Carole A; Scott-Findlay, Shannon; Moore, Katherine; Wallin, Lars

2007-01-01

Background There has been considerable interest recently in developing and evaluating interventions to increase research use by clinicians. However, most work has focused on medical practices; and nursing is not well represented in existing systematic reviews. The purpose of this article is to report findings from a systematic review of interventions aimed at increasing research use in nursing. Objective To assess the evidence on interventions aimed at increasing research use in nursing. Methods A systematic review of research use in nursing was conducted using databases (Medline, CINAHL, Healthstar, ERIC, Cochrane Central Register of Controlled Trials, and Psychinfo), grey literature, ancestry searching (Cochrane Database of Systematic Reviews), key informants, and manual searching of journals. Randomized controlled trials and controlled before- and after-studies were included if they included nurses, if the intervention was explicitly aimed at increasing research use or evidence-based practice, and if there was an explicit outcome to research use. Methodological quality was assessed using pre-existing tools. Data on interventions and outcomes were extracted and categorized using a pre-established taxonomy. Results Over 8,000 titles were screened. Three randomized controlled trials and one controlled before- and after-study met the inclusion criteria. The methodological quality of included studies was generally low. Three investigators evaluated single interventions. The most common intervention was education. Investigators measured research use using a combination of surveys (three studies) and compliance with guidelines (one study). Researcher-led educational meetings were ineffective in two studies. Educational meetings led by a local opinion leader (one study) and the formation of multidisciplinary committees (one study) were both effective at increasing research use. Conclusion Little is known about how to increase research use in nursing, and the evidence to support or refute specific interventions is inconclusive. To advance the field, we recommend that investigators: (1) use theoretically informed interventions to increase research use, (2) measure research use longitudinally using theoretically informed and psychometrically sound measures of research use, as well as, measuring patient outcomes relevant to the intervention, and (3) use more robust and methodologically sound study designs to evaluate interventions. If investigators aim to establish a link between using research and improved patient outcomes they must first identify those interventions that are effective at increasing research use. PMID:17498301

Dome diagnostics system of optical parameters and characteristics of LEDs

NASA Astrophysics Data System (ADS)

Peretyagin, Vladimir S.; Pavlenko, Nikita A.

2017-09-01

Scientific and technological progress of recent years in the production of the light emitting diodes (LEDs) has led to the expansion of areas of their application from the simplest systems to high precision lighting devices used in various fields of human activity. However, development and production (especially mass production) of LED lighting devices are impossible without a thorough analysis of its parameters and characteristics. There are many ways and devices for analysis the spatial, energy and colorimetric parameters of LEDs. The most methods are intended for definition only one parameter (for example, luminous flux) or one characteristic (for example, the angular distribution of energy or the spectral characteristics). Besides, devices used these methods are intended for measuring parameters in only one point or plane. This problem can be solved by using a dome diagnostics system of optical parameters and characteristics of LEDs, developed by specialists of the department OEDS chair of ITMO University in Russia. The paper presents the theoretical aspects of the analysis of LED's spatial (angular), energy and color parameters by using mentioned of diagnostics system. The article also presents the results of spatial), energy and color parameters measurements of some LEDs brands.

[A new non-contact method based on relative spectral intensity for determining junction temperature of LED].

PubMed

Qiu, Xi-Zhen; Zhang, Fang-Hui

2013-01-01

The high-power white LED was prepared based on the high thermal conductivity aluminum, blue chips and YAG phosphor. By studying the spectral of different junction temperature, we found that the radiation spectrum of white LED has a minimum at 485 nm. The radiation intensity at this wavelength and the junction temperature show a good linear relationship. The LED junction temperature was measured based on the formula of relative spectral intensity and junction temperature. The result measured by radiation intensity method was compared with the forward voltage method and spectral method. The experiment results reveal that the junction temperature measured by this method was no more than 2 degrees C compared with the forward voltage method. It maintains the accuracy of the forward voltage method and overcomes the small spectral shift of spectral method, which brings the shortcoming on the results. It also had the advantages of practical, efficient and intuitive, noncontact measurement, and non-destruction to the lamp structure.

Outcomes using exhaled nitric oxide measurements as an adjunct to primary care asthma management.

PubMed

Hewitt, Richard S; Modrich, Catherine M; Cowan, Jan O; Herbison, G Peter; Taylor, D Robin

2009-12-01

Exhaled nitric oxide (FENO) measurements may help to highlight when inhaled corticosteroid (ICS) therapy should or should not be adjusted in asthma. This is often difficult to judge. Our aim was to evaluate a decision-support algorithm incorporating FENO measurements in a nurse-led asthma clinic. Asthma management was guided by an algorithm based on high (>45ppb), intermediate (30-45ppb), or low (<30ppb) FENO levels and asthma control status. This provided for one of eight possible treatment options, including diagnosis review and ICS dose adjustment. Well controlled asthma increased from 41% at visit 1 to 68% at visit 5 (p=0.001). The mean fluticasone dose decreased from 312 mcg/day at visit 2 to 211mcg/day at visit 5 (p=0.022). There was a high level of protocol deviations (25%), often related to concerns about reducing the ICS dose. The % fall in FENO associated with a change in asthma status from poor control to good control was 35%. An FENO-based algorithm provided for a reduction in ICS doses without compromising asthma control. However, the results may have been influenced by the education and support which patients received. Reluctance to reduce ICS dose was an issue which may have influenced the overall results. Australian Clinical Trials Registry # 012605000354684.

Pupil-led sex education in England (RIPPLE study): cluster-randomised intervention trial.

PubMed

Stephenson, J M; Strange, V; Forrest, S; Oakley, A; Copas, A; Allen, E; Babiker, A; Black, S; Ali, M; Monteiro, H; Johnson, A M

Improvement of sex education in schools is a key part of the UK government's strategy to reduce teenage pregnancy in England. We examined the effectiveness of one form of peer-led sex education in a school-based randomised trial of over 8000 pupils. 29 schools were randomised to either peer-led sex education (intervention) or to continue their usual teacher-led sex education (control). In intervention schools, peer educators aged 16-17 years delivered three sessions of sex education to 13-14 year-old pupils from the same schools. Primary outcome was unprotected (without condom) first heterosexual intercourse by age 16 years. Analysis was by intention to treat. By age 16 years, significantly fewer girls reported intercourse in the peer-led arm than in the control arm, but proportions were similar for boys. The proportions of pupils reporting unprotected first sex did not differ for girls (8.4% intervention vs 8.3% control) or for boys (6.2% vs 4.7%). Stratified estimates of the difference between arms were -0.4% (95% CI -3.7% to 2.8%, p=0.79) for girls and -1.4% (-4.4% to 1.6%, p=0.36) for boys. At follow-up (mean age 16.0 years [SD 0.32]), girls in the intervention arm reported fewer unintended pregnancies, although the difference was borderline (2.3% vs 3.3%, p=0.07). Girls and boys were more satisfied with peer-led than teacher-led sex education, but 57% of girls and 32% of boys wanted sex education in single-sex groups. Peer-led sex education was effective in some ways, but broader strategies are needed to improve young people's sexual health. The role of single-sex sessions should be investigated further.

The effect of two phototherapy protocols on pain control in orthodontic procedure--a preliminary clinical study.

PubMed

Esper, Maria Angela Lacerda Rangel; Nicolau, Renata Amadei; Arisawa, Emília Angela Lo Schiavo

2011-09-01

Phototherapy with low-level coherent light (laser) has been reported as an analgesic and anti-inflammatory as well as having a positive effect in tissue repair in orthodontics. However, there are few clinical studies using low-level LED therapy (non-coherent light). The aim of the present study was to analyze the pain symptoms after orthodontic tooth movement associated with and not associated with coherent and non-coherent phototherapy. Fifty-five volunteers (mean age = 24.1 ± 8.1 years) were randomly divided into four groups: G1 (control), G2 (placebo), G3 (protocol 1: laser, InGaAlP, 660 nm, 4 J/cm(2), 0.03 W, 25 s), G4 (protocol 2: LED, GaAlAs, 640 nm with 40 nm full-bandwidth at half-maximum, 4 J/cm(2), 0.10 W, 70 s). Separators were used to induce orthodontic pain and the volunteers pain levels were scored with the visual analog scale (VAS) after the separator placement, after the therapy (placebo, laser, or LED), and after 2, 24, 48, 72, 96, and 120 h. The laser group did not have statistically significant results in the reduction of pain level compared to the LED group. The LED group had a significant reduction in pain levels between 2 and 120 h compared to the control and the laser groups. The LED therapy showed a significant reduction in pain sensitivity (an average of 56%), after the orthodontic tooth movement when compared to the control group.

Booster-to-AGS Multiwires and an Evolution of the Application Profile Display

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahrens,L.

2008-07-01

Follow up on BtA multiwire beam measurements taken during the 2008 polarized proton run has led to a number of better understandings (for the author) associated with the beam instrumentation involved. This history will be reviewed--some 'beam-based' results noted--and the present state of the application for these monitors described. The BtA multiwire system seems to be fundamentally an excellent diagnostic for allowing us to get the BtA line well under control in a defendable way. When beam is available in BtA, carrying out some systematic measurements with the system can get us there.

Smart lighting using a liquid crystal modulator

NASA Astrophysics Data System (ADS)

Baril, Alexandre; Thibault, Simon; Galstian, Tigran

2017-08-01

Now that LEDs have massively invaded the illumination market, a clear trend has emerged for more efficient and targeted lighting. The project described here is at the leading edge of the trend and aims at developing an evaluation board to test smart lighting applications. This is made possible thanks to a new liquid crystal light modulator recently developed for broadening LED light beams. The modulator is controlled by electrical signals and is characterized by a linear working zone. This feature allows the implementation of a closed loop control with a sensor feedback. This project shows that the use of computer vision is a promising opportunity for cheap closed loop control. The developed evaluation board integrates the liquid crystal modulator, a webcam, a LED light source and all the required electronics to implement a closed loop control with a computer vision algorithm.

Method of Reproduction of the Luminous Flux of the LED Light Sources by a Spherical Photometer

NASA Astrophysics Data System (ADS)

Huriev, M.; Neyezhmakov, P.

2018-02-01

In connection with transition to energy-efficient temporally stable light-emitting diodes (LEDs) lighting, a problem of ensuring the traceability of results of measurement of characteristics of light sources arises. The problem is related to existing measurement standards of luminous flux based on spherical photometers optimized for the reference incandescent lamps with a relative spectral characteristic different from the spectrum of the LEDs. We propose a method for reproduction of the luminous flux, which solves this problem.

A Youth-Led, Social Marketing Intervention Run by Adolescents to Encourage Healthy Lifestyles among Younger School Peers (EYTO-Kids Project): A Protocol for Pilot Cluster Randomized Controlled Trial (Spain)

PubMed Central

Aceves-Martins, Magaly; Papell-Garcia, Ignasi; Arola, Lluís; Giralt, Montse; Solà, Rosa

2017-01-01

Introduction: The EYTO-kids (European Youth Tackling Obesity in Adolescents and Children) study aims to increase fruit and/or vegetable consumption and physical activity, decrease sedentary lifestyles, and reduce the intake of sugary drinks and fast food using an innovative methodology based on social marketing and youth involvement. Methods: This study is a pilot school-based cluster randomized controlled 10-month intervention spanning two academic years (2015–2016 and 2016–2017), with eight primary schools and three high schools randomized into and designated the control group and eight primary schools and four high schools designated the intervention group in Reus, Spain. At least 301 younger school peers per group should be included. At the intervention high schools, the adolescent creators (ACs) receive an initial 16-h training session. In total, 26–32 high school ACs (12–14 years) from the four high schools will design and implement four health-promotion activities (1 h/each) for their younger (8–10 years), primary school peers. The control group will not receive any intervention. The outcomes (fruit, vegetable, fast food and sugary drink consumption; physical activity; and sedentary behaviors) of the control and intervention groups will be measured pre- and post-intervention. Conclusion: This study describes a protocol for pilot, peer-led, social marketing and youth-involved intervention, where adolescents design and implement activities for their younger peers to promote healthy lifestyles.

Evidence-Based Recommendations for Optimizing Light in Day-to-Day Spaceflight Operations

NASA Technical Reports Server (NTRS)

Whitmire, Alexandra; Leveton, Lauren; Barger, Laura; Clark, Toni; Bollweg, Laura; Ohnesorge, Kristine; Brainard, George

2015-01-01

NASA Behavioral Health and Performance Element (BHP) personnel have previously reported on efforts to transition evidence-based recommendations for a flexible lighting system on the International Space Station (ISS). Based on these recommendations, beginning in 2016 the ISS will replace the current fluorescent-based lights with an LED-based system to optimize visual performance, facilitate circadian alignment, promote sleep, and hasten schedule shifting. Additional efforts related to lighting countermeasures in spaceflight operations have also been underway. As an example, a recent BHP research study led by investigators at Harvard Medical School and Brigham and Women's Hospital, evaluated the acceptability, feasibility, and effectiveness of blue-enriched light exposure during exercise breaks for flight controllers working the overnight shift in the Mission Control Center (MCC) at NASA Johnson Space Center. This effort, along with published laboratory studies that have demonstrated the effectiveness of appropriately timed light for promoting alertness, served as an impetus for new light options, and educational protocols for flight controllers. In addition, a separate set of guidelines related to the light emitted from electronic devices, were provided to the Astronaut Office this past year. These guidelines were based on an assessment led by NASA's Lighting Environment Test Facility that included measuring the spectral power distribution, irradiance, and radiance of light emitted from ISS-grade laptops and I-Pads, as well as Android devices. Evaluations were conducted with and without the use of off-the-shelf screen filters as well as a software application that touts minimizing the short-wave length of the visible light spectrum. This presentation will focus on the transition for operations process related to lighting countermeasures in the MCC, as well as the evidence to support recommendations for optimal use of laptops, I-Pads, and Android devices during all phases of spaceflight operations.

Pharmacist-led, primary care-based disease management improves hemoglobin A1c in high-risk patients with diabetes.

PubMed

Rothman, Russell; Malone, Robb; Bryant, Betsy; Horlen, Cheryl; Pignone, Michael

2003-01-01

We developed and evaluated a comprehensive pharmacist-led, primary care-based diabetes disease management program for patients with Type 2 diabetes and poor glucose control at our academic general internal medicine practice. The primary goal of this program was to improve glucose control, as measured by hemoglobin A1c (HbA1c). Clinic-based pharmacists offered support to patients with diabetes through direct teaching about diabetes, frequent phone follow-up, medication algorithms, and use of a database that tracked patient outcomes and actively identified opportunities to improve care. From September 1999, to May 2000, 159 subjects were enrolled, and complete follow-up data were available for 138 (87%) patients. Baseline HbA1c averaged 10.8%, and after an average of 6 months of intervention, the mean reduction in HbA1c was 1.9 percentage points (95% confidence interval, 1.5-2.3). In predictive regression modeling, baseline HbA1c and new onset diabetes were associated with significant improvements in HbA1c. Age, race, gender, educational level, and provider status were not significant predictors of improvement. In conclusion, a pharmacist-based diabetes care program integrated into primary care practice significantly reduced HbA1c among patients with diabetes and poor glucose control.

Energy-saving approaches to solid state street lighting

NASA Astrophysics Data System (ADS)

Vitta, Pranciškus; Stanikūnas, Rytis; Tuzikas, Arūnas; Reklaitis, Ignas; Stonkus, Andrius; Petrulis, Andrius; Vaitkevičius, Henrikas; Žukauskas, Artūras

2011-10-01

We consider the energy-saving potential of solid-state street lighting due to improved visual performance, weather sensitive luminance control and tracking of pedestrians and vehicles. A psychophysical experiment on the measurement of reaction time with a decision making task was performed under mesopic levels of illumination provided by a highpressure sodium (HPS) lamp and different solid-state light sources, such as daylight and warm-white phosphor converted light-emitting diodes (LEDs) and red-green-blue LED clusters. The results of the experiment imply that photopic luminances of road surface provided by solid-state light sources with an optimized spectral power distribution might be up to twice as low as those provided by the HPS lamp. Dynamical correction of road luminance against road surface conditions typical of Lithuanian climate was estimated to save about 20% of energy in comparison with constant-level illumination. The estimated energy savings due to the tracking of pedestrians and vehicles amount at least 25% with the cumulative effect of intelligent control of at least 40%. A solid-state street lighting system with intelligent control was demonstrated using a 300 m long test ground consisting of 10 solid-state street luminaires, a meteorological station and microwave motion sensor network operated via power line communication.

The carry-over effects of school gardens on fruit and vegetable availability at home: A randomized controlled trial with low-income elementary schools.

PubMed

Wells, Nancy M; Meyers, Beth M; Todd, Lauren E; Henderson, Charles R; Barale, Karen; Gaolach, Brad; Ferenz, Gretchen; Aitken, Martha; Tse, Caroline C; Pattison, Karen Ostlie; Hendrix, Laura; Carson, Janet B; Taylor, Cayla; Franz, Nancy K

2018-07-01

This group-randomized controlled trial examines the effects of a school garden intervention on availability of fruits and vegetables (FV) in elementary school children's homes. Within each region, low income U.S. schools in Arkansas, Iowa, New York, and Washington State were randomly assigned to intervention group (n = 24) or waitlist control group (n = 22). Children were in grades 2, 4, and 5 at baseline (n = 2768). The garden intervention consisted of both raised-bed garden kits and a series of grade-appropriate lessons. FV availability at home was measured with a modified version of the GEMS FJV Availability Questionnaire. The instrument was administered at baseline (Fall 2011) and throughout the intervention (Spring 2012, Fall 2012, Spring 2013). Analyses were completed using general linear mixed models. The garden intervention led to an overall increase in availability of low-fat vegetables at home. Among younger children (2nd grade at baseline), the garden intervention led to greater home availability of vegetables, especially, low-fat vegetables. Moreover, for the younger group, garden intervention fidelity (GIF) or robustness predicted home availability of fruit, vegetables, and low-fat vegetables. School gardens have potential to affect FV availability in the home environment. Copyright © 2018 Elsevier Inc. All rights reserved.

NASA Ames UV-LED Poster Overview

NASA Technical Reports Server (NTRS)

Jaroux, Belgacem Amar

2015-01-01

UV-LED is a small satellite technology demonstration payload being flown on the Saudisat-4 spacecraft that is demonstrating non-contacting charge control of an isolated or floating mass using new solid-state ultra-violet light emitting diodes (UV-LEDs). Integrated to the rest of the spacecraft and launched on a Dnepr in June 19, 2014, the project is a collaboration between the NASA Ames Research Center (ARC), Stanford University, and King Abdulaziz City for Science and Technology (KACST). Beginning with its commissioning in December, 2015, the data collected by UV-LED have validated a novel method of charge control that will improve the performance of drag-free spacecraft allowing for concurrent science collection during charge management operations as well as reduce the mass, power and volume required while increasing lifetime and reliability of a charge management subsystem. UV-LED continues to operate, exploring new concepts in non-contacting charge control and collecting data crucial to understanding the lifetime of ultra-violet light emitting diodes in space. These improvements are crucial to the success of ground breaking missions such as LISA and BBO, and demonstrates the ability of low cost small satellite missions to provide technological advances that far exceed mission costs.

Real-time time-division color electroholography using a single GPU and a USB module for synchronizing reference light.

PubMed

Araki, Hiromitsu; Takada, Naoki; Niwase, Hiroaki; Ikawa, Shohei; Fujiwara, Masato; Nakayama, Hirotaka; Kakue, Takashi; Shimobaba, Tomoyoshi; Ito, Tomoyoshi

2015-12-01

We propose real-time time-division color electroholography using a single graphics processing unit (GPU) and a simple synchronization system of reference light. To facilitate real-time time-division color electroholography, we developed a light emitting diode (LED) controller with a universal serial bus (USB) module and the drive circuit for reference light. A one-chip RGB LED connected to a personal computer via an LED controller was used as the reference light. A single GPU calculates three computer-generated holograms (CGHs) suitable for red, green, and blue colors in each frame of a three-dimensional (3D) movie. After CGH calculation using a single GPU, the CPU can synchronize the CGH display with the color switching of the one-chip RGB LED via the LED controller. Consequently, we succeeded in real-time time-division color electroholography for a 3D object consisting of around 1000 points per color when an NVIDIA GeForce GTX TITAN was used as the GPU. Furthermore, we implemented the proposed method in various GPUs. The experimental results showed that the proposed method was effective for various GPUs.

Electronic trigger for capacitive touchscreen and extension of ISO 15781 standard time lag measurements to smartphones

NASA Astrophysics Data System (ADS)

Bucher, François-Xavier; Cao, Frédéric; Viard, Clément; Guichard, Frédéric

2014-03-01

We present in this paper a novel capacitive device that stimulates the touchscreen interface of a smartphone (or of any imaging device equipped with a capacitive touchscreen) and synchronizes triggering with the DxO LED Universal Timer to measure shooting time lag and shutter lag according to ISO 15781:2013. The device and protocol extend the time lag measurement beyond the standard by including negative shutter lag, a phenomenon that is more and more commonly found in smartphones. The device is computer-controlled, and this feature, combined with measurement algorithms, makes it possible to automatize a large series of captures so as to provide more refined statistical analyses when, for example, the shutter lag of "zero shutter lag" devices is limited by the frame time as our measurements confirm.

Steady-state photoluminescent excitation characterization of semiconductor carrier recombination.

PubMed

Bhosale, J S; Moore, J E; Wang, X; Bermel, P; Lundstrom, M S

2016-01-01

Photoluminescence excitation spectroscopy is a contactless characterization technique that can provide valuable information about the surface and bulk recombination parameters of a semiconductor device, distinct from other sorts of photoluminescent measurements. For this technique, a temperature-tuned light emitting diode (LED) has several advantages over other light sources. The large radiation density offered by LEDs from near-infrared to ultraviolet region at a low cost enables efficient and fast photoluminescence measurements. A simple and inexpensive LED-based setup facilitates measurement of surface recombination velocity and bulk Shockley-Read-Hall lifetime, which are key parameters to assess device performance. Under the right conditions, this technique can also provide a contactless way to measure the external quantum efficiency of a solar cell.

Steady-state photoluminescent excitation characterization of semiconductor carrier recombination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhosale, J. S.; Department of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907; Moore, J. E.

2016-01-15

Photoluminescence excitation spectroscopy is a contactless characterization technique that can provide valuable information about the surface and bulk recombination parameters of a semiconductor device, distinct from other sorts of photoluminescent measurements. For this technique, a temperature-tuned light emitting diode (LED) has several advantages over other light sources. The large radiation density offered by LEDs from near-infrared to ultraviolet region at a low cost enables efficient and fast photoluminescence measurements. A simple and inexpensive LED-based setup facilitates measurement of surface recombination velocity and bulk Shockley-Read-Hall lifetime, which are key parameters to assess device performance. Under the right conditions, this technique canmore » also provide a contactless way to measure the external quantum efficiency of a solar cell.« less

Potential sources of bias in the use of Escherichia coli to measure waterborne diarrhoea risk in low-income settings.

PubMed

Ercumen, Ayse; Arnold, Benjamin F; Naser, Abu Mohd; Unicomb, Leanne; Colford, John M; Luby, Stephen P

2017-01-01

Escherichia coli is the standard water quality indicator for diarrhoea risk. Yet, the association between E. coli and diarrhoea is inconsistent across studies without a systematic assessment of methodological differences behind this variation. Most studies measure water quality cross-sectionally with diarrhoea, risking exposure misclassification and reverse causation. Studies use different recall windows for self-reported diarrhoea; longer periods increase potential outcome misclassification through misrecall. Control of confounding is inconsistent across studies. Additionally, diarrhoea measured in unblinded intervention trials can present courtesy bias. We utilised measurements from a randomised trial of water interventions in Bangladesh to assess how these factors affect the E. coli-diarrhoea association. We compared cross-sectional versus prospective measurements of water quality and diarrhoea, 2-versus 7-day symptom recall periods, estimates with and without controlling for confounding and using measurements from control versus intervention arms of the trial. In the control arm, 2-day diarrhoea prevalence, measured prospectively 1 month after water quality, significantly increased with log 10 E. coli (PR = 1.50, 1.02-2.20). This association weakened when we used 7-day recall (PR = 1.18, 0.88-1.57), cross-sectional measurements of E. coli and diarrhoea (PR = 1.11, 0.79-1.56) or did not control for confounding (PR = 1.20, 0.88-1.62). Including data from intervention arms led to less interpretable associations, potentially due to courtesy bias, effect modification and/or reverse causation. By systematically addressing potential sources of bias, our analysis demonstrates a clear relationship between E. coli in drinking water and diarrhoea, suggesting that the continued use of E. coli as an indicator of waterborne diarrhoea risk is justified. © 2016 John Wiley & Sons Ltd.

Business-led efforts to control costs.

PubMed

Kenkel, P J

1991-07-29

Business-led initiatives to compare medical quality and prices are becoming commonplace as employers seek ways to cap medical expenses. But employers are meeting with varying degrees of cooperation from hospitals. The tale of two cities' efforts to pry open the secrets of controlling costs provides a vivid contrast in the way purchasers have tried to solve the cost-containment puzzle.

Children's postoperative symptoms at home through nurse-led telephone counseling and its effects on parents' anxiety: A randomized controlled trial.

PubMed

Özalp Gerçeker, Gülçin; Karayağız Muslu, Gonca; Yardimci, Figen

2016-10-01

The objective of this study was to evaluate children's postoperative symptoms at home after outpatient surgery through nurse-led telephone counseling and the effects of the nurse-led telephone counseling on parents' state-trait anxiety scores. In this prospective randomized controlled study, nurse-led telephone counseling was provided every day to parents in the intervention group until they came for the follow-up visit. Parents of children (n = 54) ages 3-17 years who had undergone outpatient surgery for appendicitis, cholecystectomy, or ovarian cysts were eligible to participate in the study. On the first postoperative day and at the follow-up visit, the Spielberger State-Trait-Anxiety Inventory (STAI) was administered to parents who were randomly allocated to the intervention (n = 24) and control groups (n = 30). The parents reported on postoperative symptoms such as pain, activity levels, excretion, sleep, nutrition, and wound infection. While there was no difference in STAI scores for parents between the groups at the first postoperative day, there was a significant decrease in STAI scores in the intervention group versus the control group, with parents in the intervention group reporting lower anxiety scores. Our results suggest that nurse-led telephone counseling is effective at reducing anxiety in parents of children after outpatient surgery. © 2016, Wiley Periodicals, Inc.

Controlled electroluminescence of n-ZnMgO/p-GaN light-emitting diodes

NASA Astrophysics Data System (ADS)

Goh, E. S. M.; Yang, H. Y.; Han, Z. J.; Chen, T. P.; Ostrikov, K.

2012-12-01

Effective control of room-temperature electroluminescence of n-ZnMgO/p-GaN light-emitting diodes (LEDs) over both emission intensity and wavelength is demonstrated. With varied Mg concentration, the intensity of LEDs in the near-ultraviolet region is increased due to the effective radiative recombination in the ZnMgO layer. Furthermore, the emission wavelength is shifted to the green/yellow spectral region by employing an indium-tin-oxide thin film as the dopant source, where thermally activated indium diffusion creates extra deep defect levels for carrier recombination. These results clearly demonstrate the effectiveness of controlled metal incorporation in achieving high energy efficiency and spectral tunability of the n-ZnMgO/p-GaN LED devices.

A portable time-domain LED fluorimeter for nanosecond fluorescence lifetime measurements

NASA Astrophysics Data System (ADS)

Wang, Hongtao; Qi, Ying; Mountziaris, T. J.; Salthouse, Christopher D.

2014-05-01

Fluorescence lifetime measurements are becoming increasingly important in chemical and biological research. Time-domain lifetime measurements offer fluorescence multiplexing and improved handling of interferers compared with the frequency-domain technique. In this paper, an all solid-state, filterless, and highly portable light-emitting-diode based time-domain fluorimeter (LED TDF) is reported for the measurement of nanosecond fluorescence lifetimes. LED based excitation provides more wavelengths options compared to laser diode based excitation, but the excitation is less effective due to the uncollimated beam, less optical power, and longer latency in state transition. Pulse triggering and pre-bias techniques were implemented in our LED TDF to improve the peak optical power to over 100 mW. The proposed pulsing circuit achieved an excitation light fall time of less than 2 ns. Electrical resetting technique realized a time-gated photo-detector to remove the interference of the excitation light with fluorescence. These techniques allow the LED fluorimeter to accurately measure the fluorescence lifetime of fluorescein down to concentration of 0.5 μM. In addition, all filters required in traditional instruments are eliminated for the non-attenuated excitation/emission light power. These achievements make the reported device attractive to biochemical laboratories seeking for highly portable lifetime detection devices for developing sensors based on fluorescence lifetime changes. The device was initially validated by measuring the lifetimes of three commercial fluorophores and comparing them with reported lifetime data. It was subsequently used to characterize a ZnSe quantum dot based DNA sensor.

Stereotype threat can both enhance and impair older adults' memory.

PubMed

Barber, Sarah J; Mather, Mara

2013-12-01

Negative stereotypes about aging can impair older adults' memory via stereotype threat; however, the mechanisms underlying this phenomenon are unclear. In two experiments, we tested competing predictions derived from two theoretical accounts of stereotype threat: executive-control interference and regulatory fit. Older adults completed a working memory test either under stereotype threat about age-related memory declines or not under such threat. Monetary incentives were manipulated such that recall led to gains or forgetting led to losses. The executive-control-interference account predicts that stereotype threat decreases the availability of executive-control resources and hence should impair working memory performance. The regulatory-fit account predicts that threat induces a prevention focus, which should impair performance when gains are emphasized but improve performance when losses are emphasized. Results were consistent only with the regulatory-fit account. Although stereotype threat significantly impaired older adults' working memory performance when remembering led to gains, it significantly improved performance when forgetting led to losses.

Polyethylene nano crystalsomes formed at a curved liquid/liquid interface.

PubMed

Wang, Wenda; Staub, Mark C; Zhou, Tian; Smith, Derrick M; Qi, Hao; Laird, Eric D; Cheng, Shan; Li, Christopher Y

2017-12-21

Crystallization is incommensurate with nanoscale curved space due to the lack of three dimensional translational symmetry of the latter. Herein, we report the formation of single-crystal-like, nanosized polyethylene (PE) capsules using a miniemulsion solution crystallization method. The miniemulsion was formed at elevated temperatures using PE organic solution as the oil phase and sodium dodecyl sulfate as the surfactant. Subsequently, cooling the system stepwisely for controlled crystallization led to the formation of hollow, nanosized PE crystalline capsules, which are named as crystalsomes since they mimic the classical self-assembled structures such as liposome, polymersome and colloidosome. We show that the formation of the nanosized PE crystalsomes is driven by controlled crystallization at the curved liquid/liquid interface of the miniemulson droplet. The morphology, structure and mechanical properties of the PE crystalsomes were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and atomic force spectroscopy. Electron diffraction showed the single-crystal-like nature of the crystalsomes. The incommensurateness between the nanocurved interface and the crystalline packing led to reduced crystallinity and crystallite size of the PE crystalsome, as observed from the X-ray diffraction measurements. Moreover, directly quenching the emulsion below the spinodal line led to the formation of hierarchical porous PE crystalsomes due to the coupling of the PE crystallization and liquid/liquid phase separation. We anticipate that this unique crystalsome represents a new type of nanostructure that might be used as nanodrug carriers and ultrasound contrast agents.

A new lifetime estimation model for a quicker LED reliability prediction

NASA Astrophysics Data System (ADS)

Hamon, B. H.; Mendizabal, L.; Feuillet, G.; Gasse, A.; Bataillou, B.

2014-09-01

LED reliability and lifetime prediction is a key point for Solid State Lighting adoption. For this purpose, one hundred and fifty LEDs have been aged for a reliability analysis. LEDs have been grouped following nine current-temperature stress conditions. Stress driving current was fixed between 350mA and 1A and ambient temperature between 85C and 120°C. Using integrating sphere and I(V) measurements, a cross study of the evolution of electrical and optical characteristics has been done. Results show two main failure mechanisms regarding lumen maintenance. The first one is the typically observed lumen depreciation and the second one is a much more quicker depreciation related to an increase of the leakage and non radiative currents. Models of the typical lumen depreciation and leakage resistance depreciation have been made using electrical and optical measurements during the aging tests. The combination of those models allows a new method toward a quicker LED lifetime prediction. These two models have been used for lifetime predictions for LEDs.

Solid State pH Sensor Based on Light Emitting Diodes (LED) As Detector Platform

PubMed Central

Lau, King Tong; Shepherd, R.; Diamond, Danny; Diamond, Dermot

2006-01-01

A low-power, high sensitivity, very low-cost light emitting diode (LED)-based device developed for low-cost sensor networks was modified with bromocresol green membrane to work as a solid-state pH sensor. In this approach, a reverse-biased LED functioning as a photodiode is coupled with a second LED configured in conventional emission mode. A simple timer circuit measures how long (in microsecond) it takes for the photocurrent generated on the detector LED to discharge its capacitance from logic 1 (+5 V) to logic 0 (+1.7 V). The entire instrument provides an inherently digital output of light intensity measurements for a few cents. A light dependent resistor (LDR) modified with similar sensor membrane was also used as a comparison method. Both the LED sensor and the LDR sensor responded to various pH buffer solutions in a similar way to obtain sigmoidal curves expected of the dye. The pKa value obtained for the sensors was found to agree with the literature value.

Home blood pressure monitoring with nurse-led telephone support among patients with hypertension and a history of stroke: a community-based randomized controlled trial

PubMed Central

Kerry, Sally M.; Markus, Hugh S.; Khong, Teck K.; Cloud, Geoffrey C.; Tulloch, Jenny; Coster, Denise; Ibison, Judith; Oakeshott, Pippa

2013-01-01

Background: Adequate control of blood pressure reduces the risk of recurrent stroke. We conducted a randomized controlled study to determine whether home blood pressure monitoring with nurse-led telephone support would reduce blood pressure in patients with hypertension and a history of stroke. Methods: We recruited 381 participants (mean age 72 years) from outpatient and inpatient stroke clinics between Mar. 1, 2007, and Aug. 31, 2009. Nearly half (45%, 170) of the participants had some disability due to stroke. Participants were visited at home for a baseline assessment and randomly allocated to home blood pressure monitoring (n = 187) or usual care (n = 194). Those in the intervention group were given a monitor, brief training and telephone support. Participants who had home blood pressure readings consistently over target (target < 130/80 mm Hg) were advised to consult their family physician. The main outcome measure was a fall in systolic blood pressure after 12 months, measured by an independent researcher unaware of group allocation. Results: Despite more patients in the intervention group than in the control group having changes to antihypertensive treatment during the trial period (60.1% [98/163] v. 47.6% [78/164], p = 0.02), the fall in systolic blood pressure from baseline did not differ significantly between the groups (adjusted mean difference 0.3 mm Hg, 95% confidence interval –3.6 to 4.2 mm Hg). Subgroup analysis showed significant interaction with disability due to stroke (p = 0.03 at 6 months) and baseline blood pressure (p = 0.03 at 12 months). Interpretation: Overall, home monitoring did not improve blood pressure control in patients with hypertension and a history of stroke. It was associated with a fall in systolic pressure in patients who had uncontrolled blood pressure at baseline and those without disability due to stroke. Trial registration: ClinicalTrials.gov registration NCT00514800 PMID:23128283

Protocol for the PINCER trial: a cluster randomised trial comparing the effectiveness of a pharmacist-led IT-based intervention with simple feedback in reducing rates of clinically important errors in medicines management in general practices

PubMed Central

Avery, Anthony J; Rodgers, Sarah; Cantrill, Judith A; Armstrong, Sarah; Elliott, Rachel; Howard, Rachel; Kendrick, Denise; Morris, Caroline J; Murray, Scott A; Prescott, Robin J; Cresswell, Kathrin; Sheikh, Aziz

2009-01-01

Background Medication errors are an important cause of morbidity and mortality in primary care. The aims of this study are to determine the effectiveness, cost effectiveness and acceptability of a pharmacist-led information-technology-based complex intervention compared with simple feedback in reducing proportions of patients at risk from potentially hazardous prescribing and medicines management in general (family) practice. Methods Research subject group: "At-risk" patients registered with computerised general practices in two geographical regions in England. Design: Parallel group pragmatic cluster randomised trial. Interventions: Practices will be randomised to either: (i) Computer-generated feedback; or (ii) Pharmacist-led intervention comprising of computer-generated feedback, educational outreach and dedicated support. Primary outcome measures: The proportion of patients in each practice at six and 12 months post intervention: - with a computer-recorded history of peptic ulcer being prescribed non-selective non-steroidal anti-inflammatory drugs - with a computer-recorded diagnosis of asthma being prescribed beta-blockers - aged 75 years and older receiving long-term prescriptions for angiotensin converting enzyme inhibitors or loop diuretics without a recorded assessment of renal function and electrolytes in the preceding 15 months. Secondary outcome measures; These relate to a number of other examples of potentially hazardous prescribing and medicines management. Economic analysis: An economic evaluation will be done of the cost per error avoided, from the perspective of the UK National Health Service (NHS), comparing the pharmacist-led intervention with simple feedback. Qualitative analysis: A qualitative study will be conducted to explore the views and experiences of health care professionals and NHS managers concerning the interventions, and investigate possible reasons why the interventions prove effective, or conversely prove ineffective. Sample size: 34 practices in each of the two treatment arms would provide at least 80% power (two-tailed alpha of 0.05) to demonstrate a 50% reduction in error rates for each of the three primary outcome measures in the pharmacist-led intervention arm compared with a 11% reduction in the simple feedback arm. Discussion At the time of submission of this article, 72 general practices have been recruited (36 in each arm of the trial) and the interventions have been delivered. Analysis has not yet been undertaken. Trial registration Current controlled trials ISRCTN21785299 PMID:19409095

A nurse-led education and cognitive behaviour therapy-based intervention among adults with uncontrolled type 2 diabetes: A randomised controlled trial.

PubMed

Whitehead, Lisa C; Crowe, Marie T; Carter, Janet D; Maskill, Virginia R; Carlyle, Dave; Bugge, Carol; Frampton, Chris M A

2017-08-01

Diabetes mellitus is associated with significant morbidity, mortality, and escalating health care costs. Research has consistently demonstrated the importance of glycaemic control in delaying the onset, and decreasing the incidence, of both the short-term and long-term complications of diabetes. Although glycaemic control is difficult to achieve and challenging to maintain, it is key to reducing negative disease outcomes. The aim of this study was to determine whether a nurse-led educational intervention alone or a nurse-led intervention using education and acceptance and commitment therapy (ACT) was effective in reducing hemoglobin A 1c (HbA 1c ) in people living with uncontrolled type 2 diabetes compared to usual care. Adults over the age of 18 years, with a confirmed diagnosis of type 2 diabetes and HbA 1c outside of the recommended range (4%-7%, 20-53 mmol/mol) for 12 months or more, were eligible to participate. Participants were randomised to either a nurse-led education intervention, a nurse-led education plus ACT intervention, or a usual care. One hundred and eighteen participants completed baseline data collection (N = 34 education group, N = 39 education plus ACT, N = 45 control group). An intention to treat analysis was used. A statistically significant reduction in HbA 1c in the education intervention group was found (P = .011 [7.48, 8.14]). At 6 months, HbA 1c was reduced in both intervention groups (education group -0.21 and education and ACT group -0.04) and increased in the control group (+0.32). A positive change in HbA 1c (HbA 1c reduced) was noted in 50 participants overall. Twice as many participants in the intervention groups demonstrated an improvement as compared to the control group (56% of the education group, 51% education plus ACT, and 24% control group. At 6 months post intervention, HbA 1c was reduced in both intervention groups with a greater reduction noted in the nurse-led education intervention. © 2017 John Wiley & Sons, Ltd.

A randomized trial of peer-delivered self-management support for hypertension.

PubMed

Whittle, Jeff; Schapira, Marilyn M; Fletcher, Kathlyn E; Hayes, Avery; Morzinski, Jeffrey; Laud, Purushottam; Eastwood, Dan; Ertl, Kristyn; Patterson, Leslie; Mosack, Katie E

2014-11-01

Peer-led interventions to improve chronic disease self-management can improve health outcomes but are not widely used. Therefore, we tested a peer-led hypertension self-management intervention delivered at regular meetings of community veterans' organizations. We randomized 58 organizational units ("posts") of veterans' organizations in southeast Wisconsin to peer-led vs. professionally delivered self-management education. Volunteer peer leaders at peer-led posts delivered monthly presentations regarding hypertension self-management during regular post meetings. Volunteer post representatives at seminar posts encouraged post members to attend 3 didactic seminars delivered by health professionals at a time separate from the post meeting. Volunteers in both groups encouraged members to self-monitor using blood pressure cuffs, weight scales, and pedometers. Our primary outcome was change in systolic blood pressure (SBP) at 12 months. We measured SBP in 404 participants at baseline and in 379 participants at 12 months. SBP decreased significantly (4.4mm Hg; P < 0.0001) overall; the decrease was similar in peer-led and seminar posts (3.5mm Hg vs. 5.4mm Hg; P = 0.24). Among participants with uncontrolled BP at baseline, SBP decreased by 10.1mm Hg from baseline to 12 months but was again similar in the 2 groups. This pattern was also seen at 6 months and with diastolic blood pressure. Our peer-led educational intervention was not more effective than didactic seminars for SBP control. Although peer-led educational programs have had important impacts in a number of studies, we did not find our intervention superior to a similar intervention delivered by healthcare professionals. ClinicalTrials.gov NCT00571038. © Published by Oxford University Press on behalf of American Journal of Hypertension Ltd 2014. This work is written by (a) US Government employees(s) and is in the public domain in the US.

The Effectiveness and Sustainability of a Universal School-Based Programme for Preventing Depression in Chinese Adolescents: A Follow-Up Study Using Quasi-Experimental Design

PubMed Central

Lai, Eliza S. Y.; Kwok, Chi-Leung; Wong, Paul W. C.; Fu, King-Wa; Law, Yik-Wa; Yip, Paul S. F.

2016-01-01

Background A pilot study about the effectiveness of a universal school-based programme, “The Little Prince is Depressed”, for preventing depression in Chinese adolescents in Hong Kong was conducted and reported previously. This study used a larger sample to examine the effectiveness and sustainability of the programme. Methods This study used quasi-experimental design. Twelve schools enrolled in “The Little Prince is Depressed” programme either as an intervention or a control condition. The intervention schools carried out the 12-session programme in two phases: the professional-led first phase and the teacher-led second phase. All participants were required to complete a questionnaire at three time points measuring their (1) depressive, anxiety, and stress levels; (2) knowledge of mental health; (3) attitudes towards mental illness; (4) perceived social support; and (5) help-seeking behaviours. Results A total of 3,391 students participated in the study. The level of depressive symptoms did not reduce significantly at post-intervention; however, a delayed effect was observed at follow-up assessment for the participants of the teacher-led group in reducing anxiety and stress levels. Also, the knowledge of mental health and attitudes towards mental illness of the intervention-group participants significantly improved at post-test, and the outcomes were maintained at 4 to 5 months after the intervention in both the professional-led and the teacher-led conditions (p<.05). A preference among schoolchildren for whom to seek help from was identified. Conclusions The universal depression prevention programme was effective in enhancing knowledge of mental health and promoting a more positive attitude towards mental illness among adolescents in Hong Kong. In particular, the teacher-led group showed better outcomes than the professional-led group in reducing students’ anxiety and stress at follow-up period. The programme can achieve sustainability in schools if teachers are provided with adequate support. PMID:26921275

The Effectiveness and Sustainability of a Universal School-Based Programme for Preventing Depression in Chinese Adolescents: A Follow-Up Study Using Quasi-Experimental Design.

PubMed

Lai, Eliza S Y; Kwok, Chi-Leung; Wong, Paul W C; Fu, King-Wa; Law, Yik-Wa; Yip, Paul S F

2016-01-01

A pilot study about the effectiveness of a universal school-based programme, "The Little Prince is Depressed", for preventing depression in Chinese adolescents in Hong Kong was conducted and reported previously. This study used a larger sample to examine the effectiveness and sustainability of the programme. This study used quasi-experimental design. Twelve schools enrolled in "The Little Prince is Depressed" programme either as an intervention or a control condition. The intervention schools carried out the 12-session programme in two phases: the professional-led first phase and the teacher-led second phase. All participants were required to complete a questionnaire at three time points measuring their (1) depressive, anxiety, and stress levels; (2) knowledge of mental health; (3) attitudes towards mental illness; (4) perceived social support; and (5) help-seeking behaviours. A total of 3,391 students participated in the study. The level of depressive symptoms did not reduce significantly at post-intervention; however, a delayed effect was observed at follow-up assessment for the participants of the teacher-led group in reducing anxiety and stress levels. Also, the knowledge of mental health and attitudes towards mental illness of the intervention-group participants significantly improved at post-test, and the outcomes were maintained at 4 to 5 months after the intervention in both the professional-led and the teacher-led conditions (p<.05). A preference among schoolchildren for whom to seek help from was identified. The universal depression prevention programme was effective in enhancing knowledge of mental health and promoting a more positive attitude towards mental illness among adolescents in Hong Kong. In particular, the teacher-led group showed better outcomes than the professional-led group in reducing students' anxiety and stress at follow-up period. The programme can achieve sustainability in schools if teachers are provided with adequate support.

Cost-effectiveness of a stepped-care intervention to prevent major depression in patients with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression: design of a cluster-randomized controlled trial.

PubMed

van Dijk, Susan E M; Pols, Alide D; Adriaanse, Marcel C; Bosmans, Judith E; Elders, Petra J M; van Marwijk, Harm W J; van Tulder, Maurits W

2013-05-07

Co-morbid major depression is a significant problem among patients with type 2 diabetes mellitus and/or coronary heart disease and this negatively impacts quality of life. Subthreshold depression is the most important risk factor for the development of major depression. Given the highly significant association between depression and adverse health outcomes and the limited capacity for depression treatment in primary care, there is an urgent need for interventions that successfully prevent the transition from subthreshold depression into a major depressive disorder. Nurse led stepped-care is a promising way to accomplish this. The aim of this study is to evaluate the cost-effectiveness of a nurse-led indicated stepped-care program to prevent major depression among patients with type 2 diabetes mellitus and/or coronary heart disease in primary care who also have subthreshold depressive symptoms. An economic evaluation will be conducted alongside a cluster-randomized controlled trial in approximately thirty general practices in the Netherlands. Randomization takes place at the level of participating practice nurses. We aim to include 236 participants who will either receive a nurse-led indicated stepped-care program for depressive symptoms or care as usual. The stepped-care program consists of four sequential but flexible treatment steps: 1) watchful waiting, 2) guided self-help treatment, 3) problem solving treatment and 4) referral to the general practitioner. The primary clinical outcome measure is the cumulative incidence of major depressive disorder as measured with the Mini International Neuropsychiatric Interview. Secondary outcomes include severity of depressive symptoms, quality of life, anxiety and physical outcomes. Costs will be measured from a societal perspective and include health care utilization, medication and lost productivity costs. Measurements will be performed at baseline and 3, 6, 9 and 12 months. The intervention being investigated is expected to prevent new cases of depression among people with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression, with subsequent beneficial effects on quality of life, clinical outcomes and health care costs. When proven cost-effective, the program provides a viable treatment option in the Dutch primary care system. Dutch Trial Register NTR3715.

Measurements of UGR of LED light by a DSLR colorimeter

NASA Astrophysics Data System (ADS)

Hsu, Shau-Wei; Chen, Cheng-Hsien; Jiaan, Yuh-Der

2012-10-01

We have developed an image-based measurement method on UGR (unified glare rating) of interior lighting environment. A calibrated DSLR (digital single-lens reflex camera) with an ultra wide-angle lens was used to measure the luminance distribution, by which the corresponding parameters can be automatically calculated. A LED lighting was placed in a room and measured at various positions and directions to study the properties of UGR. The testing results are fitted with visual experiences and UGR principles. To further examine the results, a spectroradiometer and an illuminance meter were respectively used to measure the luminance and illuminance at the same position and orientation of the DSLR. The calculation of UGR by this image-based method may solve the problem of non-uniform luminance-distribution of LED lighting, and was studied on segmentation of the luminance graph for the calculations.

Structure–property relationships in atomic-scale junctions: Histograms and beyond

DOE PAGES

Mark S. Hybertsen; Venkataraman, Latha

2016-03-03

Over the past 10 years, there has been tremendous progress in the measurement, modeling and understanding of structure–function relationships in single molecule junctions. Numerous research groups have addressed significant scientific questions, directed both to conductance phenomena at the single molecule level and to the fundamental chemistry that controls junction functionality. Many different functionalities have been demonstrated, including single-molecule diodes, optically and mechanically activated switches, and, significantly, physical phenomena with no classical analogues, such as those based on quantum interference effects. Experimental techniques for reliable and reproducible single molecule junction formation and characterization have led to this progress. In particular, themore » scanning tunneling microscope based break-junction (STM-BJ) technique has enabled rapid, sequential measurement of large numbers of nanoscale junctions allowing a statistical analysis to readily distinguish reproducible characteristics. Furthermore, harnessing fundamental link chemistry has provided the necessary chemical control over junction formation, enabling measurements that revealed clear relationships between molecular structure and conductance characteristics.« less

Structure–property relationships in atomic-scale junctions: Histograms and beyond

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mark S. Hybertsen; Venkataraman, Latha

Over the past 10 years, there has been tremendous progress in the measurement, modeling and understanding of structure–function relationships in single molecule junctions. Numerous research groups have addressed significant scientific questions, directed both to conductance phenomena at the single molecule level and to the fundamental chemistry that controls junction functionality. Many different functionalities have been demonstrated, including single-molecule diodes, optically and mechanically activated switches, and, significantly, physical phenomena with no classical analogues, such as those based on quantum interference effects. Experimental techniques for reliable and reproducible single molecule junction formation and characterization have led to this progress. In particular, themore » scanning tunneling microscope based break-junction (STM-BJ) technique has enabled rapid, sequential measurement of large numbers of nanoscale junctions allowing a statistical analysis to readily distinguish reproducible characteristics. Furthermore, harnessing fundamental link chemistry has provided the necessary chemical control over junction formation, enabling measurements that revealed clear relationships between molecular structure and conductance characteristics.« less

Participation of HNO3 CIMS Instrument in the Sage III Ozone Loss and Validation Experiment (SOLVE)

NASA Technical Reports Server (NTRS)

Eisele, F. L.

2001-01-01

This project was part of a larger SOLVE project led by Paul Wennberg at California Institute of Technology. The work completed on this project included participating in the installation and preflight testing of a new chemical ionization mass spectrometer for measuring gas and particle phase nitric acid on the ER-2. The investigators subsequently participated in SOLVE where additional instrument improvements were made and a substantial data set was generated. The two Georgia Tech investigators that participated in this work (Fred Eisele and Dave Tanner) had previously been responsible for much of the design and construction of the ion source and mass spectrometer which would be used to measure HNO3 in SOLVE, with Caltech focusing on inlets, calibration, gas supplies/pumping computer control, and overall integration. Thus, a similar focus remained during the SOLVE measurements though all investigators worked on most if not all aspects of the instrument at some point in the mission. Some of the more interesting results from the study included measurements of nitric acid on what are thought to be 5-20 microns diameter individual particles which could supply a local mechanism for HNO3 removal, Nitric acid measurements on SOLVE were completed as a collaborative effort with a great deal of overlap between this project and the larger parent project led by Paul Wennberg. As such, the instrumentation used, its operation, and the resulting measurements are far more fully discussed in the attached report (appendix A) which describes the joint SOLVE nitric acid measurement effort.

Illumination design for semiconductor backlight inspection and application extensions

NASA Astrophysics Data System (ADS)

Zhou, Wei; Rutherford, Todd; Hart, Darcy

2013-09-01

High speed strobe based illumination scheme is one of the most critical factors for high throughput semiconductor defect inspection applications. HB LEDs are always the first and best options for such applications due to numerous unique advantages such as excellent spatial and temporal stability, fast responding time, large and linear intensity dynamic range and no heat issue for the extremely low duty cycle applications. For some applications where a large area is required to be illuminated simultaneously, it remains a great challenge to efficiently package a large amount of HB-LEDs in a highly confined 3D space, to generate a seamless illuminated area with high luminance efficiency and spatial uniformity. A novel 3D structured collimation lens is presented in this paper. The non-circular edge shape reduces the intensity drop at the channel boundaries, while the secondary curvatures on the top of the collimator lens efficiently guides the light into desired angular space. The number of the edges and the radius of the top surface curvature are control parameters for the system level performance and the manufacture cost trade-off. The proposed 3D structured LED collimation lens also maintains the benefits of traditional LED collimation lens such as coupling efficiency and mold manufacture capability. The applications can be extended into other non-illumination area like parallelism measurement and solar panel concentrator etc.

Surveying for "artifacts": the susceptibility of the OCB-performance evaluation relationship to common rater, item, and measurement context effects.

PubMed

Podsakoff, Nathan P; Whiting, Steven W; Welsh, David T; Mai, Ke Michael

2013-09-01

Despite the increased attention paid to biases attributable to common method variance (CMV) over the past 50 years, researchers have only recently begun to systematically examine the effect of specific sources of CMV in previously published empirical studies. Our study contributes to this research by examining the extent to which common rater, item, and measurement context characteristics bias the relationships between organizational citizenship behaviors and performance evaluations using a mixed-effects analytic technique. Results from 173 correlations reported in 81 empirical studies (N = 31,146) indicate that even after controlling for study-level factors, common rater and anchor point number similarity substantially biased the focal correlations. Indeed, these sources of CMV (a) led to estimates that were between 60% and 96% larger when comparing measures obtained from a common rater, versus different raters; (b) led to 39% larger estimates when a common source rated the scales using the same number, versus a different number, of anchor points; and (c) when taken together with other study-level predictors, accounted for over half of the between-study variance in the focal correlations. We discuss the implications for researchers and practitioners and provide recommendations for future research. PsycINFO Database Record (c) 2013 APA, all rights reserved

Solution of multi-element LED light sources development automation problem

NASA Astrophysics Data System (ADS)

Chertov, Aleksandr N.; Gorbunova, Elena V.; Korotaev, Valery V.; Peretyagin, Vladimir S.

2014-09-01

The intensive development of LED technologies resulted in the creation of multicomponent light sources in the form of controlled illumination devices based on usage of mentioned LED technologies. These light sources are used in different areas of production (for example, in the food industry for sorting products or in the textile industry for quality control, etc.). The use of LED lighting products in the devices used in specialized lighting, became possible due to wide range of colors of light, LED structures (which determines the direction of radiation, the spatial distribution and intensity of the radiation, electrical, heat, power and other characteristics), and of course, the possibility of obtaining any shade in a wide dynamic range of brightness values. LED-based lighting devices are notable for the diversity of parameters and characteristics, such as color radiation, location and number of emitters, etc. Although LED technologies have several advantages, however, they require more attention if you need to ensure a certain character of illumination distribution and/or distribution of the color picture at a predetermined distance (for example, at flat surface, work zone, area of analysis or observation). This paper presents software designed for the development of the multicomponent LED light sources. The possibility of obtaining the desired color and energy distribution at the zone of analysis by specifying the spatial parameters of the created multicomponent light source and using of real power, spectral and color parameters and characteristics of the LEDs is shown as well.

Is light-emitting diode phototherapy (LED-LLLT) really effective?

PubMed Central

Kim, Won-Serk; Calderhead, R Glen

2011-01-01

Background: Low level light therapy (LLLT) has attracted attention in many clinical fields with a new generation of light-emitting diodes (LEDs) which can irradiate large targets. To pain control, the first main application of LLLT, have been added LED-LLLT in the accelerated healing of wounds, both traumatic and iatrogenic, inflammatory acne and the patient-driven application of skin rejuvenation. Rationale and Applications: The rationale behind LED-LLLT is underpinned by the reported efficacy of LED-LLLT at a cellular and subcellular level, particularly for the 633 nm and 830 nm wavelengths, and evidence for this is presented. Improved blood flow and neovascularization are associated with 830 nm. A large variety of cytokines, chemokines and macromolecules can be induced by LED phototherapy. Among the clinical applications, non-healing wounds can be healed through restoring the collagenesis/collagenase imbalance in such examples, and ‘normal’ wounds heal faster and better. Pain, including postoperative pain, postoperative edema and many types of inflammation can be significantly reduced. Experimental and clinical evidence: Some personal examples of evidence are offered by the first author, including controlled animal models demonstrating the systemic effect of 830 nm LED-LLLT on wound healing and on induced inflammation. Human patients are presented to illustrate the efficacy of LED phototherapy on treatment-resistant inflammatory disorders. Conclusions: Provided an LED phototherapy system has the correct wavelength for the target cells, delivers an appropriate power density and an adequate energy density, then it will be at least partly, if not significantly, effective. The use of LED-LLLT as an adjunct to conventional surgical or nonsurgical indications is an even more exciting prospect. LED-LLLT is here to stay. PMID:24155530

Comparison of corneal power, astigmatism, and wavefront aberration measurements obtained by a point-source color light-emitting diode-based topographer, a Placido-disk topographer, and a combined Placido and dual Scheimpflug device.

PubMed

Ventura, Bruna V; Wang, Li; Ali, Shazia F; Koch, Douglas D; Weikert, Mitchell P

2015-08-01

To evaluate and compare the performance of a point-source color light-emitting diode (LED)-based topographer (color-LED) in measuring anterior corneal power and aberrations with that of a Placido-disk topographer and a combined Placido and dual Scheimpflug device. Cullen Eye Institute, Baylor College of Medicine, Houston, Texas USA. Retrospective observational case series. Normal eyes and post-refractive-surgery eyes were consecutively measured using color-LED, Placido, and dual-Scheimpflug devices. The main outcome measures were anterior corneal power, astigmatism, and higher-order aberrations (HOAs) (6.0 mm pupil), which were compared using the t test. There were no statistically significant differences in corneal power measurements in normal and post-refractive surgery eyes and in astigmatism magnitude in post-refractive surgery eyes between the color-LED device and Placido or dual Scheimpflug devices (all P > .05). In normal eyes, there were no statistically significant differences in 3rd-order coma and 4th-order spherical aberration between the color-LED and Placido devices and in HOA root mean square, 3rd-order coma, 3rd-order trefoil, 4th-order spherical aberration, and 4th-order secondary astigmatism between the color-LED and dual Scheimpflug devices (all P > .05). In post-refractive surgery eyes, the color-LED device agreed with the Placido and dual-Scheimpflug devices regarding 3rd-order coma and 4th-order spherical aberration (all P > .05). In normal and post-refractive surgery eyes, all 3 devices were comparable with respect to corneal power. The agreement in corneal aberrations varied. Drs. Wang, Koch, and Weikert are consultants to Ziemer Ophthalmic Systems AG. Dr. Koch is a consultant to Abbott Medical Optics, Inc., Alcon Surgical, Inc., and i-Optics Corp. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Side illuminated optical fiber as a multiplexing element for spectroscopic systems

NASA Astrophysics Data System (ADS)

Egalon, Claudio O.; Matta, Michael P.; Lavezzari, Delbert C.; Insley, Robert Y.; Jaring, Carolyn C.; Quiday, Marie F.

2013-09-01

A new type of colorimeter with multiple channels was demonstrated using a side illuminated optical fiber. When different spots of a properly modified fiber are side illuminated, multiple signals are generated and guided by the waveguide: the essence of multiplexing. This configuration is simple, low cost, does not require a sensitive coating and can analyze several samples along the fiber with a single detector: the most expensive component. Since regular colorimeters use one detector per sample, our new configuration considerably lowers the cost of analyzing multiple samples. This system consists of a fiber mounted over a support, three LEDs, an LED driver, a photo diode and a read-out: to increase the signal, the fiber was tapered. For calibration purposes, six solutions of different concentrations of food dye were prepared, placed inside cuvettes along the fiber length and illuminated by the LEDs. This light passes through the solution, strikes the fiber and is guided to the detector: the darker the solution the lower the signal intensity. Several calibration curves were obtained using different light intensities: it was found that the greater the intensity, the higher the colorimeter sensitivity. This simple capability can be used to easily control the device's sensitivity and its resolution. Although built for three samples only, this device can be modified to accommodate more. With cuvettes measuring 1 cm, it is possible to accommodate one sample per cm of fiber. Also, with minor modifications, this colorimeter can be used for fluorescence, scattering and index of refraction measurements.

Reducing self-objectification: are dissonance-based methods a possible approach?

PubMed

Becker, Carolyn Black; Hill, Kaitlin; Greif, Rebecca; Han, Hongmei; Stewart, Tiffany

2013-01-01

Previous research has documented that self-objectification is associated with numerous negative outcomes including body shame, eating disorder (ED) pathology, and negative affect. This exploratory open study investigated whether or not an evidence-based body image improvement program that targets thin-ideal internalization in university women also reduces self-objectification. A second aim of the study was to determine if previous findings showing that body shame mediated the relationship between self-objectification and eating disorder pathology at a single time point (consistent with self-objectification theory) but did not mediate longitudinally (inconsistent with self-objectification theory) would be replicated in a new sample under novel conditions. Ninety-six university women completed a peer-led dissonance-based intervention, along with assessment measures at pre-, post-intervention, 8-week and 8-month follow-up. To address the open trial nature of this study, a planned manipulation check was included to make sure that peer-led dissonance decreased thin-ideal internalization, body dissatisfaction, eating disorder pathology, and negative affect with effect sizes being similar to past randomized controlled trials. We hypothesized that all three subscales of the Objectified Body Consciousness Scale (i.e., self-surveillance, body shame, and appearance control beliefs) would be reduced. In addition, we hypothesized that body shame would mediate the relationship between self-objectification (i.e., self-surveillance) and eating disorder pathology at a both at a single time point and longitudinally. The planned manipulation check supported the interpretation that peer-led dissonance in this study largely yielded comparable changes to past controlled trials. In terms of changes in dependent variables, results supported all hypotheses with the exception of body shame, which remained unchanged. With regards to the mediation analyses, our first (cross-sectional) hypothesis but not our second (longitudinal) was supported. Findings provide preliminary support for the use of dissonance interventions in reducing self-surveillance and body control beliefs. Results for body shame and the mediation analyses suggest that greater scrutiny of the body shame construct is warranted.

The responses of light interception, photosynthesis and fruit yield of cucumber to LED-lighting within the canopy.

PubMed

Trouwborst, Govert; Oosterkamp, Joke; Hogewoning, Sander W; Harbinson, Jeremy; van Ieperen, Wim

2010-03-01

Mathematical models of light attenuation and canopy photosynthesis suggest that crop photosynthesis increases by more uniform vertical irradiance within crops. This would result when a larger proportion of total irradiance is applied within canopies (interlighting) instead of from above (top lighting). These irradiance profiles can be generated by Light Emitting Diodes (LEDs). We investigated the effects of interlighting with LEDs on light interception, on vertical gradients of leaf photosynthetic characteristics and on crop production and development of a greenhouse-grown Cucumis sativus'Samona' crop and analysed the interaction between them. Plants were grown in a greenhouse under low natural irradiance (winter) with supplemental irradiance of 221 micromol photosynthetic photon flux m(-2) s(-1) (20 h per day). In the interlighting treatment, LEDs (80% Red, 20% Blue) supplied 38% of the supplemental irradiance within the canopy with 62% as top lighting by High-Pressure Sodium (HPS)-lamps. The control was 100% top lighting (HPS lamps). We measured horizontal and vertical light extinction as well as leaf photosynthetic characteristics at different leaf layers, and determined total plant production. Leaf mass per area and dry mass allocation to leaves were significantly greater but leaf appearance rate and plant length were smaller in the interlighting treatment. Although leaf photosynthetic characteristics were significantly increased in the lower leaf layers, interlighting did not increase total biomass or fruit production, partly because of a significantly reduced vertical and horizontal light interception caused by extreme leaf curling, likely because of the LED-light spectrum used, and partly because of the relatively low irradiances from above.

Physical Activity Measurements: Lessons Learned from the Pathways Study

PubMed Central

Going, Scott B.

2015-01-01

High obesity rates in American Indian children led to Pathways, a randomized school and community-based childhood prevention study. Seven tribes, five universities, the NIH/NHLBI, and four elementary schools partnered. Increasing physical activity (PA) was an important intervention target. PA assessment was based on study objectives, feasibility, and tribal acceptance. A time-segmented analysis was also desired. Two methods were developed during pilot testing, a new PA questionnaire and accelerometry. Together, the methods provided qualitative and quantitative information and showed 3 of 4 sites were able to increase average daily PA, although overall the control versus intervention difference was not significant. The main limitation was inability to distinguish PA among individuals. Accelerometer size and some community concerns led to a protocol based on a single day of wearing time. Newer model triaxial accelerometers which are much smaller and allow sampling of multiple days of activity are recommended for future studies. PMID:20689391

Methods of total spectral radiant flux realization at VNIIOFI

NASA Astrophysics Data System (ADS)

Ivashin, Evgeniy; Lalek, Jan; Rybczyński, Andrzej; Ogarev, Sergey; Khlevnoy, Boris; Dobroserdov, Dmitry; Sapritsky, Victor

2018-02-01

VNIIOFI carries out works on realization of independent methods for realization of the total spectral radiant flux (TSRF) of incoherent optical radiation sources - reference high-temperature blackbodies (BB), halogen lamps, and LED with quasi-Lambert spatial distribution of radiance. The paper describes three schemes for measuring facilities using photometers, spectroradiometers and computer-controlled high class goniometer. The paper describes different approaches for TSRF realization at the VNIIOFI National radiometric standard on the basis of high-temperature BB and LED sources, and gonio-spectroradiometer. Further, they are planned to be compared, and the use of fixed-point cells (in particular, based on the high-temperature δ(MoC)-C metal-carbon eutectic with a phase transition temperature of 2583 °C corresponding to the metrological optical “source-A”) as an option instead of the BB is considered in order to enhance calibration accuracy.

The effectiveness of a primary care nursing-led dietary intervention for prediabetes: a mixed methods pilot study.

PubMed

Coppell, Kirsten J; Abel, Sally L; Freer, Trish; Gray, Andrew; Sharp, Kiri; Norton, Joanna K; Spedding, Terrie; Ward, Lillian; Whitehead, Lisa C

2017-12-21

Primary care nurse-led prediabetes interventions are seldom reported. We examined the implementation and feasibility of a 6-month multilevel primary care nurse-led prediabetes lifestyle intervention compared with current practice in patients with prediabetes, with weight and glycated haemoglobin (HbA1c) as outcomes. This study used a convergent mixed methods design involving a 6-month pragmatic non-randomised pilot study with a qualitative process evaluation, and was conducted in two neighbouring provincial cities in New Zealand, with indigenous Māori populations comprising 18.2% and 23.0%, respectively. Participants were non-pregnant adults aged ≤ 70 years with newly diagnosed prediabetes (HbA1c 41-49 mmol/mol), body mass index (BMI) ≥ 25 kg/m 2 and not prescribed Metformin. A structured dietary intervention tool delivered by primary care nurses with visits at baseline, 2-3 weeks, 3 months and 6 months was implemented in four intervention practices. Four control practices continued to provide usual care. Primary quantitative outcome measures were weight and HbA1c. Linear and quantile regression models were used to compare each outcome between the two groups at follow-up. Qualitative data included: observations of nurse training sessions and steering group meetings; document review; semi-structured interviews with a purposive sample of key informants (n = 17) and intervention patients (n = 20). Thematic analysis was used. One hundred fifty-seven patients with prediabetes enrolled (85 intervention, 72 control), 47.8% female and 31.2% Māori. Co-morbidities were common, particularly hypertension (49.7%), dyslipidaemia (40.1%) and gout (15.9%). Baseline and 6 month measures were available for 91% control and 79% intervention participants. After adjustment, the intervention group lost a mean 1.3 kg more than the control group (p < 0.001). Mean HbA1c, BMI and waist circumference decreased in the intervention group and increased in the control group, but differences were not statistically significant. Implementation fidelity was high, and it was feasible to implement the intervention in busy general practice settings. The intervention was highly acceptable to both patients and key stakeholders, especially primary care nurses. Study findings confirm the feasibility and acceptability of primary care nurses providing structured dietary advice to patients with prediabetes in busy general practice settings. The small but potentially beneficial mean weight loss among the intervention group supports further investigation. ANZCTR ACTRN12615000806561 . Registered 3 August 2015 (Retrospectively registered).

Short-term changes in general and memory-specific control beliefs and their relationship to cognition in younger and older adults.

PubMed

Bielak, Allison A M; Hultsch, David F; Levy-Ajzenkopf, Judi; MacDonald, Stuart W S; Hunter, Michael A; Strauss, Esther

2007-01-01

We examined short-term changes in younger and older adults' control beliefs. Participants completed measures of general and memory-specific competence and locus of control on 10 bi-monthly occasions. At each occasion, participants rated their control beliefs prior to and following completion of a battery of cognitive tasks. Exposure to the set of cognitively demanding tasks led to declines in older adults' ratings of both general and memory-specific competence compared to little change or increases in younger adults' ratings. Older adults were also more inconsistent in their reported locus of control beliefs across the 10 occasions. Analyses examining the relationship between control beliefs and actual cognitive performance revealed few significant effects, suggesting that short-term changes in perceived control are not driven by monitoring changes in actual performance. The results suggest the importance of assessing short-term as well as long-term changes in perceived control to obtain a complete picture of aging-related changes.

Pulsed characterization of a UV LED for pulsed power applications on a silicon carbide photoconductive semiconductor switch

NASA Astrophysics Data System (ADS)

Wilson, Nicholas; Mauch, Daniel; Meyers, Vincent; Feathers, Shannon; Dickens, James; Neuber, Andreas

2017-08-01

The electrical and optical characteristics of a high-power UV light emitting diode (LED) (365 nm wavelength) were evaluated under pulsed operating conditions at current amplitudes several orders of magnitude beyond the LED's manufacturer specifications. Geared towards triggering of photoconductive semiconductor switches (PCSSs) for pulsed power applications, measurements were made over varying pulse widths (25 ns-100 μs), current (0 A-250 A), and repetition rates (single shot-5 MHz). The LED forward voltage was observed to increase linearly with increasing current (˜3.5 V-53 V) and decrease with increasing pulse widths. The peak optical power observed was >30 W, and a maximum system efficiency of 23% was achieved. The evaluated LED and auxiliary hardware were successfully used as the optical trigger source for a 4H-SiC PCSS. The lowest measured on-resistance of SiC was approximately 67 kΩ.

Pulsed characterization of a UV LED for pulsed power applications on a silicon carbide photoconductive semiconductor switch.

PubMed

Wilson, Nicholas; Mauch, Daniel; Meyers, Vincent; Feathers, Shannon; Dickens, James; Neuber, Andreas

2017-08-01

The electrical and optical characteristics of a high-power UV light emitting diode (LED) (365 nm wavelength) were evaluated under pulsed operating conditions at current amplitudes several orders of magnitude beyond the LED's manufacturer specifications. Geared towards triggering of photoconductive semiconductor switches (PCSSs) for pulsed power applications, measurements were made over varying pulse widths (25 ns-100 μs), current (0 A-250 A), and repetition rates (single shot-5 MHz). The LED forward voltage was observed to increase linearly with increasing current (∼3.5 V-53 V) and decrease with increasing pulse widths. The peak optical power observed was >30 W, and a maximum system efficiency of 23% was achieved. The evaluated LED and auxiliary hardware were successfully used as the optical trigger source for a 4H-SiC PCSS. The lowest measured on-resistance of SiC was approximately 67 kΩ.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standardmore » LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.« less

A three-channel LED driver with single line transportation technique

NASA Astrophysics Data System (ADS)

Yu, Caideng; Du, Yiying; Jiang, Qiao; Zhou, Yun; Lv, Jian

2012-10-01

Designed a three-channel LED driver, realized the single-wire transmission of cascade signal between the drive IC of LED. Including the MCU digital interface, date register, clock synchronization, PWM grayscale adjustment circuit, as well as high voltage driver circuit for LED, etc… The driver control LED displaying 256 gray. Chip will generate synchronous sampling clock signals according to the received serial signals, when 24 bits dates have been received, the output pin begins to transport the dates followed-up which are automotive shaped to the input of the next chip. When the date receiving becomes low level that represent RESET, the red, green and blue channels will export different signals based on different input dates. Through the external MCU, it is realized the Separate luminance, and by connecting chips in series it achieved the control of outdoor big screen' colorful display. The automatic shaping forward technique makes the number of chips cascading immune to the limitations of signal transmission, but only limited by the refresh speed.

Size-controlled InGaN/GaN nanorod LEDs with an ITO/graphene transparent layer

NASA Astrophysics Data System (ADS)

Shim, Jae-Phil; Seong, Won-Seok; Min, Jung-Hong; Kong, Duk-Jo; Seo, Dong-Ju; Kim, Hyung-jun; Lee, Dong-Seon

2016-11-01

We introduce ITO on graphene as a current-spreading layer for separated InGaN/GaN nanorod LEDs for the purpose of passivation-free and high light-extraction efficiency. Transferred graphene on InGaN/GaN nanorods effectively blocks the diffusion of ITO atoms to nanorods, facilitating the production of transparent ITO/graphene contact on parallel-nanorod LEDs, without filling the air gaps, like a bridge structure. The ITO/graphene layer sufficiently spreads current in a lateral direction, resulting in uniform and reliable light emission observed from the whole area of the top surface. Using KOH treatment, we reduce series resistance and reverse leakage current in nanorod LEDs by recovering the plasma-damaged region. We also control the size of the nanorods by varying the KOH treatment time and observe strain relaxation via blueshift in electroluminescence. As a result, bridge-structured LEDs with 8 min of KOH treatment show 15 times higher light-emitting efficiency than with 2 min of KOH treatment.

Improved retention rates with low-cost interventions in hypertension and diabetes management in a rural African environment of nurse-led care: a cluster-randomised trial.

PubMed

Labhardt, Niklaus D; Balo, Jean-Richard; Ndam, Mama; Manga, Engelbert; Stoll, Beat

2011-10-01

To compare the effects of low-level facility-based interventions on patient retention rates for cardiovascular (CV) disease in an environment of task shifting and nurse-led care in rural health districts in Central Cameroon. This study is an open-label, three-arm, cluster-randomised trial in nurse-led facilities. All three groups implemented a treatment contract. The control group (group 1) had no additional intervention, group 2 received the incentive of 1 month of free treatment every forth month of regularly respected visits, and group 3 received reminder letters in case of a missed follow-up visit. The primary outcome was patient retention at 1 year. Secondary outcomes were adherence to follow-up visit schemes and changes in blood pressure (BP) and blood glucose levels. Patients' monthly spending for drugs and transport was calculated retrospectively. A total of 33 centres and 221 patients were included. After 1 year, 109 patients (49.3%) remained in the programme. Retention rates in groups 2 and 3 were 60% and 65%, respectively, against 29% in the control group. The differences between the intervention groups and the control group were significant (P < 0.001), but differences between the two intervention groups were not (P = 0.719). There were no significant differences in BP or fasting plasma glucose trends between retained patients in the study groups. Average monthly cost to patients for antihypertensive medication was € 1.1 ± 0.9 and for diabetics €1.2 ± 1.1. Transport costs to the centres were on average €1.1 ± 1.0 for hypertensive patients and €1.1 ± 1.6 for patients with diabetes. Low-cost interventions suited to an environment of task shifting and nurse-led care and needing minimal additional resources can significantly improve retention rates in CV disease management in rural Africa. The combination of a treatment contract and reminder letters in case of missed appointments was an effective measure to retain patients in care. © 2011 Blackwell Publishing Ltd.

Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Royer, Michael P.; Poplawski, Michael E.; Brown, Charles C.

2014-12-01

To date, all three reports in the retail lamps series have focused on basic performance parameters, such as lumen output, efficacy, and color quality. This report goes a step further, examining the photoelectric characteristics (i.e., dimming and flicker) of a subset of lamps from CALiPER Retails Lamps Study 3. Specifically, this report focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers. The results demonstrate notable variation across the various lamps, but little variation between the four dimmers. Overall, the LED lamps: ~tended to have higher relative light outputmore » compared to the incandescent and halogen benchmark at the same dimmer output signal (RMS voltage). The lamps’ dimming curves (i.e., the relationship between control signal and relative light output) ranged from linear to very similar to the square-law curve typical of an incandescent lamp. ~generally exhibited symmetrical behavior—the same dimming curve—when measured proceeding from maximum to minimum or minimum to maximum control signal. ~mostly dimmed below 10% of full light output, with some exceptions for specific lamp and dimmer combinations ~exhibited a range of flicker characteristics, with many comparing favorably to the level typical of a magnetically-ballasted fluorescent lamp through at least a majority of the dimming range. ~ always exceeded the relative (normalized) efficacy over the dimming range of the benchmark lamps, which rapidly decline in efficacy when they are dimmed. This report generally does not attempt to rank the performance of one product compared to another, but instead focuses on the collective performance of the group versus conventional incandescent or halogen lamps, the performance of which is likely to be the baseline for a majority of consumers. Undoubtedly, some LED lamps perform better—or more similar to conventional lamps—than others. Some perform desirably for one characteristic, but not others. Consumers (and specifiers) may have a hard time distinguishing better-performing lamps from one another; at this time, physical experimentation is likely the best evaluation tool.« less

Development of a LED based standard for luminous flux

NASA Astrophysics Data System (ADS)

Sardinha, André; Ázara, Ivo; Torres, Miguel; Menegotto, Thiago; Grieneisen, Hans Peter; Borghi, Giovanna; Couceiro, Iakyra; Zim, Alexandre; Muller, Filipe

2018-03-01

Incandescent lamps, simple artifacts with radiation spectrum very similar to a black-body emitter, are traditional standards in photometry. Nowadays LEDs are broadly used in lighting, with great variety of spectra, and it is convenient to use standards for photometry with spectral distribution similar to that of the measured artifact. Research and development of such standards occur in several National Metrology Institutes. In Brazil, Inmetro is working on a practical solution for providing a LED based standard to be used for luminous flux measurements in the field of general lighting. This paper shows the measurements made for the developing of a prototype, that in sequence will be characterized in photometric quantities.

A community health worker-led lifestyle behavior intervention for Latina (Hispanic) women: feasibility and outcomes of a randomized controlled trial.

PubMed

Koniak-Griffin, Deborah; Brecht, Mary-Lynn; Takayanagi, Sumiko; Villegas, Juan; Melendrez, Marylee; Balcázar, Héctor

2015-01-01

Low-income Latinas (Hispanics) face risk for cardiovascular disease due to high rates of overweight/obesity, sedentary lifestyle, and other factors. Limited access to health care and language barriers may prevent delivery of health promotion messages. Targeted approaches, including the integration of community health workers, may be required to promote healthy lifestyle and prevent chronic disease in underserved ethnic minority groups. The term commonly used to refer to female community health workers in Latino communities is "promotora(s)." This study evaluates the outcomes and feasibility of a promotora-led lifestyle behavior intervention for overweight, immigrant Latinas. A community prevention model was employed in planning and implementing this study. A randomized controlled trial design was used. A Community Advisory Board provided expertise in evaluating feasibility of study implementation in the community and other important guidance. The sample was comprised of 223 women aged 35-64 years, predominantly with low income and ≤8th grade education. The culturally tailored Lifestyle Behavior Intervention included group education (8 classes based upon Su Corazon, Su Vida), followed by 4 months of individual teaching and coaching (home visits and telephone calls). The control group received a comparable length educational program and follow-up contacts. Evaluations were conducted at baseline and at 6 and 9 months using a dietary habits questionnaire, accelerometer readings of physical activity, and clinical measures (body mass index, weight, waist circumference, blood pressure, lipids, blood glucose). Data were collected between January 2010 and August 2012. Women in the intervention group improved significantly in dietary habits, waist circumference, and physical activity in comparison to those in the control group. A treatment dosage effect was observed for weight and waist circumference. Knowledge about heart disease increased. High attendance at classes and participation in the individual teaching and counseling sessions and high retention rates support the feasibility and acceptability of the promotora-led lifestyle behavior intervention. Our findings demonstrate that lifestyle behaviors and other risk factors of overweight Latina women may be improved through a promotora-led lifestyle behavior intervention. Feasibility of implementing this intervention in community settings and engaging promotoras as facilitators is supported. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effect of LED light stimulation on sleep latency in night shift people

NASA Astrophysics Data System (ADS)

Wu, Jih-Huah; Chang, Yang-Chyuan; Chiu, Hui-Ling; Fang, Wei; Shan, Yi-Chia; Chen, Ming-Jie; Chang, Yu-Ting

2014-05-01

Sleep problems are getting worse and worse in modern world. They have a severe impact on psychological and physical health, as well as social performances. From our previous study, the brainwave α rhythm, θ wave and β wave were affected by radiating the palm of the subjects with low-level laser array. In addition, from other study, the LED array stimulator (LEDAS) also has the similar effects. In the present study, LED light was used to radiate the left palm of the subjects too, and the effects were assessed with the multiple sleep latency test (MSLT) and heart-rate variability (HRV) analysis. The results revealed that it doesn't have significant meaning between these two groups. However, the tendency of the sleep latency (SL) in the LED group was shorter than that in the control group. In addition, the autonomic nervous system (ANS) analysis showed that the sympathetic nervous system was getting larger in the LED group than that in the control group, and total ANS activity were mainly getting larger in the LED group. We infer that this LED stimulation could reduce SL and balance ANS activity of the night-shift people. In the future, the further study will be conducted on normal subjects.

Advances in quantifying air-sea gas exchange and environmental forcing.

PubMed

Wanninkhof, Rik; Asher, William E; Ho, David T; Sweeney, Colm; McGillis, Wade R

2009-01-01

The past decade has seen a substantial amount of research on air-sea gas exchange and its environmental controls. These studies have significantly advanced the understanding of processes that control gas transfer, led to higher quality field measurements, and improved estimates of the flux of climate-relevant gases between the ocean and atmosphere. This review discusses the fundamental principles of air-sea gas transfer and recent developments in gas transfer theory, parameterizations, and measurement techniques in the context of the exchange of carbon dioxide. However, much of this discussion is applicable to any sparingly soluble, non-reactive gas. We show how the use of global variables of environmental forcing that have recently become available and gas exchange relationships that incorporate the main forcing factors will lead to improved estimates of global and regional air-sea gas fluxes based on better fundamental physical, chemical, and biological foundations.

The cinema LED lighting system design based on SCM

NASA Astrophysics Data System (ADS)

En, De; Wang, Xiaobin

2010-11-01

A LED lighting system in the modern theater and the corresponding control program is introduced. Studies show that moderate and mutative brightness in the space would attract audiences' attention on the screen easily. SCM controls LED dynamically by outputting PWM pulse in different duty cycle. That cinema dome lights' intensity can vary with the plot changed, make people get a better view of experience. This article expounds the architecture of hardware system in the schedule and the control flow of the host of the solution. Besides, it introduces the design of software as well. At last, the system which is proved energy-saving, reliable, good visual effect and having using value by means of producing a small-scale model, which reproduce the whole system and achieves the desired result.

LED Curing Lights and Temperature Changes in Different Tooth Sites

PubMed Central

Armellin, E.; Bovesecchi, G.; Coppa, P.; Pasquantonio, G.; Cerroni, L.

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ 2. After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure. PMID:27195282

LED Curing Lights and Temperature Changes in Different Tooth Sites.

PubMed

Armellin, E; Bovesecchi, G; Coppa, P; Pasquantonio, G; Cerroni, L

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ (2). After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure.

CALiPER Report 20.2: Dimming, Flicker, and Power Quality Characteristics of LED PAR38 Lamps

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-03-31

This report focuses on the flicker and power quality performance of the Series 20 lamps at full output and various dimmed levels. All of the Series 20 PAR38 lamps that manufacturers claimed to be dimmable (including all halogen lamps) were evaluated individually (one lamp at a time) both on a switch and under the control of a phase-cut dimmer designed for use with "all classes of bulbs." Measurements of luminous flux, flicker, and power quality were taken at 10 target dimmed settings and compared with operation on a switch. Because only a single unit of each product was evaluated onmore » a single dimmer that may or may not have been recommended by its manufacturer, this report focuses on the performance of the products relative to each other, rather than the best-case performance of each lamp or variation in performance delivered from each lamp. Despite these limitations, the results suggest that LED performance is improving, and performance trends are beginning to emerge, perhaps due in part to the identification of preferred LED driver strategies for lamp products.« less

Statistical analysis plan for the family-led rehabilitation after stroke in India (ATTEND) trial: A multicenter randomized controlled trial of a new model of stroke rehabilitation compared to usual care.

PubMed

Billot, Laurent; Lindley, Richard I; Harvey, Lisa A; Maulik, Pallab K; Hackett, Maree L; Murthy, Gudlavalleti Vs; Anderson, Craig S; Shamanna, Bindiganavale R; Jan, Stephen; Walker, Marion; Forster, Anne; Langhorne, Peter; Verma, Shweta J; Felix, Cynthia; Alim, Mohammed; Gandhi, Dorcas Bc; Pandian, Jeyaraj Durai

2017-02-01

Background In low- and middle-income countries, few patients receive organized rehabilitation after stroke, yet the burden of chronic diseases such as stroke is increasing in these countries. Affordable models of effective rehabilitation could have a major impact. The ATTEND trial is evaluating a family-led caregiver delivered rehabilitation program after stroke. Objective To publish the detailed statistical analysis plan for the ATTEND trial prior to trial unblinding. Methods Based upon the published registration and protocol, the blinded steering committee and management team, led by the trial statistician, have developed a statistical analysis plan. The plan has been informed by the chosen outcome measures, the data collection forms and knowledge of key baseline data. Results The resulting statistical analysis plan is consistent with best practice and will allow open and transparent reporting. Conclusions Publication of the trial statistical analysis plan reduces potential bias in trial reporting, and clearly outlines pre-specified analyses. Clinical Trial Registrations India CTRI/2013/04/003557; Australian New Zealand Clinical Trials Registry ACTRN1261000078752; Universal Trial Number U1111-1138-6707.

Adaptive 84.44-190 Mbit/s phosphor-LED wireless communication utilizing no blue filter at practical transmission distance.

PubMed

Yeh, C H; Chow, C W; Chen, H Y; Chen, J; Liu, Y L

2014-04-21

We propose and experimentally demonstrate a white-light phosphor-LED visible light communication (VLC) system with an adaptive 84.44 to 190 Mbit/s 16 quadrature-amplitude-modulation (QAM) orthogonal-frequency-division-multiplexing (OFDM) signal utilizing bit-loading method. Here, the optimal analogy pre-equalization design is performed at LED transmitter (Tx) side and no blue filter is used at the Rx side. Hence, the ~1 MHz modulation bandwidth of phosphor-LED could be extended to 30 MHz. In addition, the measured bit error rates (BERs) of < 3.8 × 10(-3) [forward error correction (FEC) threshold] at different measured data rates can be achieved at practical transmission distances of 0.75 to 2 m.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ton, My K.; Richman, Eric E.; Gilbride, Theresa L.

In August 2008 the Pacific Northwest National Laboratory (PNNL) conducted a light emitting diode (LED) residential lighting demonstration project for the U.S. Department of Energy (DOE), Office of Building Technologies, as part of DOE’s Solid State Lighting (SSL) Technology Demonstration Gateway Program. Two lighting technologies, an LED replacement for downlight lamps (bulbs) and an LED undercabinet lighting fixture, were tested in the demonstration which was conducted in two homes built for the 2008 Tour of Homes in Eugene, Oregon. The homes were built by the Lane County Home Builders Association (HBA), and Future B Homes. The Energy Trust of Oregonmore » (ETO) also participated in the demonstration project. The LED downlight product, the LR6, made by Cree LED Lighting Solutions acts as a screw-in replacement for incandescent and halogen bulbs in recessed can downlights. The second product tested is Phillips/Color Kinetics’ eW® Profile Powercore undercabinet fixture designed to mount under kitchen cabinets to illuminate the countertop and backsplash surfaces. Quantitative and qualitative measurements of light performance and electrical power usage were taken at each site before and after initially installed halogen and incandescent lamps were replaced with the LED products. Energy savings and simple paybacks were also calculated and builders who toured the homes were surveyed for their responses to the LED products. The LED downlight product drew 12 Watts of power, cutting energy use by 82% compared to the 65W incandescent lamp and by 84% compared to the 75W halogen lamp. The LED undercabinet fixture drew 10 watts, cutting energy use by 83% to 90% compared to the halogen product, which was tested at two power settings: a low power 60W setting and a high power 105W setting. The LED downlight consistently provided more light than the halogen and incandescent lamps in horizontal measurements at counter height and floor level. It also outperformed in vertical illuminance measurements taken on the walls, indicating better lateral dispersion of the light. The undercabinet fixture’s light output was midway between the low and high power halogen undercabinet fixture light outputs (35.8 foot candle versus 13.4 fc and 53.4 fc) but it produced a more uniform light (max/min ratio of 7.0 versus 10.8). The color correlated temperature (CCT, the blue or yellowness) of the LED light correlated well with the halogen and incandescent lights (2675 K vs 2700 K). The color rendering of the LED downlight also correlated well at 92 CRI compared to 100 CRI for the halogen and incandescent lamps. The LED undercabinet fixture had measures of 2880 K CCT and 71 CRI compared to the 2700 K and 100 CRI scores for the halogen undercabinet fixture. Builders who toured the homes were surveyed; they gave the LED downlight high marks for brightness, said the undercabinet improved shadows and glare and said both products improved overall visibility, home appearance, and home value. Paybacks on the LED downlight ranged from 7.6 years (assuming electricity cost of 11 c/kWh) to 13.5 years (at 5C/kWh). Paybacks on the LED undercabinet fixture in a new home ranged from 4.4 years (11c/kWh electricity) to 7.6 years (5c/kWh) based on product costs of $95 per LED downlight and $140 per LED undercabinet fixture at 3 hrs per day of usage for the downlight and 2 hrs per day for the undercabinet lighting.« less

Evaluation of Primary Dendrite Arm Spacings from Aluminum-7wt% Silicon alloys Directionally Solidified aboard the International Space Station - Comparison with Theory

NASA Technical Reports Server (NTRS)

Angart, Samuel; Lauer, Mark; Poirier, David; Tewari, Surendra; Rajamure, Ravi; Grugel, Richard

2015-01-01

Aluminum – 7wt% silicon alloys were directionally solidified in the microgravity environment aboard the International Space Station as part of the “MIcrostructure Formation in CASTing of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions” (MICAST) European led program. Cross-sections of the sample during periods of steady-state growth were metallographically prepared from which the primary dendrite arm spacing (lambda 1) was measured. These spacings were found to be in reasonable agreement with the Hunt-Lu model which assumes a diffusion-controlled, convectionless, environment during controlled solidification. Deviation from the model was found and is attributed to gravity-independent thermocapillary convection where, over short distances, the liquid appears to have separated from the crucible wall.

Persuasive Communications to Change Actions: An Analysis of Behavioral and Cognitive Impact in HIV Prevention

PubMed Central

Albarracín, Dolores; McNatt, Penny S.; Klein, Cynthia T. F.; Ho, Ringo M.; Mitchell, Amy L.; Kumkale, G. Tarcan

2016-01-01

This meta-analysis examined the validity of various theoretical assumptions about cognitive and behavioral change following a communication recommending condom use. The synthesis comprised 82 treatment and 29 control groups included in 46 longitudinal reports with measures of perceived severity and susceptibility, attitudes and expectancies, norms, perceptions of control, intentions, knowledge, behavioral skills, or condom use. Results indicated that across the sample of studies, communications taught recipients about facts related to HIV and also induced favorable attitudes and expectancies, greater control perceptions, and stronger intentions to use condoms in the future. Moreover, messages that presented attitudinal information and modeled behavioral skills led to increased condom use. Results are discussed in the context of theories of human behavior and change and in reference to HIV-prevention interventions. PMID:12683737

A portable time-domain LED fluorimeter for nanosecond fluorescence lifetime measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hongtao; Salthouse, Christopher D., E-mail: salthouse@ecs.umass.edu; Center for Personalized Health Monitoring, University of Massachusetts, Amherst, Massachusetts 01003

2014-05-15

Fluorescence lifetime measurements are becoming increasingly important in chemical and biological research. Time-domain lifetime measurements offer fluorescence multiplexing and improved handling of interferers compared with the frequency-domain technique. In this paper, an all solid-state, filterless, and highly portable light-emitting-diode based time-domain fluorimeter (LED TDF) is reported for the measurement of nanosecond fluorescence lifetimes. LED based excitation provides more wavelengths options compared to laser diode based excitation, but the excitation is less effective due to the uncollimated beam, less optical power, and longer latency in state transition. Pulse triggering and pre-bias techniques were implemented in our LED TDF to improve themore » peak optical power to over 100 mW. The proposed pulsing circuit achieved an excitation light fall time of less than 2 ns. Electrical resetting technique realized a time-gated photo-detector to remove the interference of the excitation light with fluorescence. These techniques allow the LED fluorimeter to accurately measure the fluorescence lifetime of fluorescein down to concentration of 0.5 μM. In addition, all filters required in traditional instruments are eliminated for the non-attenuated excitation/emission light power. These achievements make the reported device attractive to biochemical laboratories seeking for highly portable lifetime detection devices for developing sensors based on fluorescence lifetime changes. The device was initially validated by measuring the lifetimes of three commercial fluorophores and comparing them with reported lifetime data. It was subsequently used to characterize a ZnSe quantum dot based DNA sensor.« less

Community-based peer support significantly improves metabolic control in people with Type 2 diabetes in Yaoundé, Cameroon.

PubMed

Assah, F K; Atanga, E N; Enoru, S; Sobngwi, E; Mbanya, J C

2015-07-01

To examine the effectiveness of a community-based multilevel peer support intervention in addition to usual diabetes care on improving glycaemic levels, blood pressure and lipids in patients with Type 2 diabetes in Yaoundé, Cameroon. A total of 96 subjects with poorly controlled Type 2 diabetes (intervention group) and 96 age- and sex-matched controls were recruited and followed up over 6 months. The intervention subjects underwent a peer support intervention through peer-led group meetings, personal encounters and telephone calls. Both intervention subjects and controls continued their usual clinical care. HbA1c , blood pressure, blood lipids and self-care behaviours were measured at 0 and 6 months. There was significant reduction in HbA1c in the intervention group [-33 mmol/mol (-3.0%)] compared with controls [-14 mmol/mol (-1.3%)]; P < 0.001. Peer support also led to significant reductions in fasting blood sugar (-0.83 g/l P < 0.001), cholesterol (-0.54 g/l P < 0.001), HDL (-0.09 g/l, P < 0.001), BMI (-2.71 kg/m² P < 0.001) and diastolic pressure (-6.77 mmHg, P < 0.001) over the 6-month period. Also, diabetes self-care behaviours in the intervention group improved significantly over the 6 months of peer support. Community-based peer support, in addition to usual care, significantly improved metabolic control in patients with uncontrolled Type 2 diabetes in Yaoundé, Cameroon. This could provide a model for optimizing diabetes care and control in other settings with limited healthcare and financial resources. © 2015 The Authors. Diabetic Medicine © 2015 Diabetes UK.

Evaluation of a nurse-led management program to complement the treatment of adolescent acute lymphoblastic leukemia patients.

PubMed

Lin, Hailong; Zhou, Shiyan; Zhang, Dongxiu; Huang, Leting

2016-11-01

To evaluate a nurse-led management model of adolescent acute lymphoblastic leukemia (ALL) patients and improve their psychological care and quality of life. Seventy-three adolescent ALL patients participated in an open, controlled clinical trial and were randomized into a nurse-led management model group (n=36) and a doctor-led management model group (n=37). Two assessment questionnaires were administered to assess and compare the 2 models during a 1.5-year follow-up period: the hospital anxiety and depression scale (HADS) questionnaire was administered at 6 different time points, and the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Questionnaire Core 30 (QLQ-C30) at 3 different time points. There were no differences in anxiety and depression between the groups according to the first-administered questionnaire (the mean anxiety and depression scores of the nurse-led group were 14.2±4.1 and 10.8±2.7, respectively; those of the doctor-led group were 13.8±3.8 and 10.6±2.2, respectively). However, repeated measures analysis of variance detected differences in subsequent HADS-based scores as a function of time between the 2 groups (p<0.05). Moreover, the Holm-Sidak's multiple comparisons tests showed that patients of the nurse-led group had significantly decreased mean anxiety scores compared to those in the doctor-led group at the third and subsequent sessions, as well as in mean depression scores from the second session onwards (all p<0.05). According to the last-administered EORTC QLQ-C30 questionnaire, there were statistical differences in cognitive, emotional, social, and quality of life scales between the 2 groups (all p<0.05), but not in role and physical scales (all p>0.05). It is necessary to offer unique cognitive, psychological, and behavioral management models to adolescent ALL patients that are tailored toward their age group. Strengthening such management is more conducive to alleviating or even reversing psychological problems, and to improving patients' quality of life while ensuring complication-free follow-up periods. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

[Forefoot relief with shoe inserts : Effects of different construction strategies].

PubMed

Baur, H; Merz, N; Muster, A; Flückiger, G; Hirschmüller, A

2018-04-01

Shoe inserts and shoe modifications are used to reduce plantar peak pressure. The effects of different shoe inserts and shoe construction strategies for relief of the forefoot have not yet been sufficiently evaluated. The aim of this study was to analyze the effects of shoe inserts and shoe construction strategies (e.g. metatarsal pad, forefoot cushioning and control) and shoe modifications (e.g. flexible or stiff) on the peak plantar pressure in the forefoot region. In this study 15 healthy subjects were recruited. Plantar pressure distribution was measured using an in-shoe system during walking (3.5km∙h -1 ) on a treadmill and the average plantar peak pressure (kPa) in the forefoot was calculated. The statistics for testing the hypothesis were carried out using 2‑factorial ANOVA with repeat measurements (factors: shoe, insert; α = 0.05). The metatarsal pad and forefoot cushioning led to a reduction of peak pressure, which was statistically significant compared to the control condition (p = 0.009). No differences were observed between both shoe inserts (p > 0.05). A comparison between stiff and flexible shoes revealed a statistically significant pressure reduction in favor of stiff shoes (p = 0.0001). The metatarsal pad led to a peak pressure increase in the midfoot of 12% and by 21% compared to control and forefoot cushioning, respectively. A peak pressure reduction in the forefoot can be achieved with a metatarsal pad or with cushioning; however, the metatarsal pad resulted in a subsequent increase in midfoot pressure. Moreover, shoe construction is crucial because a stiff shoe contributes to a better peak pressure reduction compared to a flexible shoe. Prospective clinical studies should be carried out to prove whether this results in beneficial effects for patients with metatarsalgia.

Evaluation of a nurse-led dementia education and knowledge translation programme in primary care: A cluster randomized controlled trial.

PubMed

Wang, Yao; Xiao, Lily Dongxia; Ullah, Shahid; He, Guo-Ping; De Bellis, Anita

2017-02-01

The lack of dementia education programmes for health professionals in primary care is one of the major factors contributing to the unmet demand for dementia care services. To determine the effectiveness of a nurse-led dementia education and knowledge translation programme for health professionals in primary care; participants' satisfaction with the programme; and to understand participants' perceptions of and experiences in the programme. A cluster randomized controlled trial was used as the main methodology to evaluate health professionals' knowledge, attitudes and care approach. Focus groups were used at the end of the project to understand health professionals' perceptions of and experiences in the programme. Fourteen community health service centres in a province in China participated in the study. Seven centres were randomly assigned to the intervention or control group respectively and 85 health professionals in each group completed the programme. A train-the-trainer model was used to implement a dementia education and knowledge translation programme. Outcome variables were measured at baseline, on the completion of the programme and at 3-month follow-up. A mixed effect linear regression model was applied to compare the significant differences of outcome measures over time between the two groups. Focus groups were guided by four semi-structured questions and analysed using content analysis. Findings revealed significant effects of the education and knowledge translation programme on participants' knowledge, attitudes and a person-centred care approach. Focus groups confirmed that the programme had a positive impact on dementia care practice. A dementia education and knowledge translation programme for health professionals in primary care has positive effects on their knowledge, attitudes, care approach and care practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reducing sedentary time in adults at risk of type 2 diabetes: process evaluation of the STAND (Sedentary Time ANd Diabetes) RCT.

PubMed

Biddle, Stuart J H; Edwardson, Charlotte L; Gorely, Trish; Wilmot, Emma G; Yates, Thomas; Nimmo, Myra A; Khunti, Kamlesh; Davies, Melanie J

2017-01-14

Reducing sedentary behaviour may have important health implications. This study evaluated the potential enablers and barriers for outcomes of a randomised controlled trial (RCT) designed to evaluate a pragmatic education based intervention designed to reduce sedentary (sitting) behaviour in young adults at high risk of type 2 diabetes. Data were collected from participants in the intervention group immediately after an educational workshop addressing sedentary time and diabetes risk (n = 71), through phone interviews 6 weeks (n = 45) after the workshop, and at the conclusion of the 12-month trial (n = 10). The two education session facilitators were also interviewed about the intervention. The RCT showed no difference in sedentary time at 12 months between intervention and control arms. The lack of behaviour change appeared not to be attributed to the workshops, which were well led and very favourably received according to feedback. However, factors contributing to this lack of behaviour change include lack of perceived health risk from baseline measures feedback; the preference to adopt physically active behaviours rather than to sit less; certain barriers to sitting less; motivational drift after the 3-month follow-up measurements where participants had no contact for a further 9 months; and, for some, unreliability of the self-monitoring tool. The workshop was well led and well received by the attendees but future interventions need to consider more contact with participants, discuss any specific benefits around simply standing to reduce sitting time, address the barriers to sitting less, and provide a more user-friendly and reliable self-monitoring tool. Current controlled trials ISRCTN08434554 , MRC project 91409. Registered retrospectively on 22 February 2011.

Workspace definition for navigated control functional endoscopic sinus surgery

NASA Astrophysics Data System (ADS)

Gessat, Michael; Hofer, Mathias; Audette, Michael; Dietz, Andreas; Meixensberger, Jürgen; Stauß, Gero; Burgert, Oliver

2007-03-01

For the pre-operative definition of a surgical workspace for Navigated Control ® Functional Endoscopic Sinus Surgery (FESS), we developed a semi-automatic image processing system. Based on observations of surgeons using a manual system, we implemented a workflow-based engineering process that led us to the development of a system reducing time and workload spent during the workspace definition. The system uses a feature based on local curvature to align vertices of a polygonal outline along the bone structures defining the cavities of the inner nose. An anisotropic morphologic operator was developed solve problems arising from artifacts from noise and partial volume effects. We used time measurements and NASA's TLX questionnaire to evaluate our system.

Size-controllable nanopyramids photonic crystal selectively grown on p-GaN for enhanced light-extraction of light-emitting diodes.

PubMed

Du, Chengxiao; Wei, Tongbo; Zheng, Haiyang; Wang, Liancheng; Geng, Chong; Yan, Qingfeng; Wang, Junxi; Li, Jinmin

2013-10-21

Size-controllable p-GaN hexagonal nanopyramids (HnPs)-photonic crystal (PhC) structures were selectively grown on flat p-GaN layer for the elimination of total internal reflection of light-emitting diodes (LEDs). The LEDs with HnPs-PhC of 46.3% bottom fill factor (PhC lattice constant is 730 nm) showed an improved light output power by 99.9% at forward current of 350 mA compared to the reference LEDs with flat p-GaN layer. We confirmed the effect of HnPs-PhC with different bottom fill factors and the effect of nanopyramid-shaped and nanocolumn-shaped PhC on the light-extraction of LEDs was also investigated by using three-dimensional finite-difference time-domain simulations.

Spot fat reduction by red and near infrared LED phototherapy

NASA Astrophysics Data System (ADS)

Lim, Sungkyoo; Park, Eal-Whan

2018-02-01

Low level light therapy (LLLT) using light from red and near infrared LEDs or Lasers have been reported effective as noninvasive methods for reducing spot fat. A total of 55 subjects were randomly divided into test groups and control groups for abdominal fat reduction clinical trial using red and near infrared LED phototherapy devices. Red and near infrared light with irradiance of 10 mW/cm2 were irradiated over the abdominal area to the test group for 30 minutes followed by 30 minutes of aerobic exercise, 3 times a week for 4 weeks. Control group used sham devices for 30 minutes and followed by 30 minutes of aerobic exercise. It is expected that red and near infrared LED phototherapy combined with aerobic exercise would be effective and safe for abdominal fat reduction without any side effects.

TESTING HIGH-DIMENSIONAL COVARIANCE MATRICES, WITH APPLICATION TO DETECTING SCHIZOPHRENIA RISK GENES

PubMed Central

Zhu, Lingxue; Lei, Jing; Devlin, Bernie; Roeder, Kathryn

2017-01-01

Scientists routinely compare gene expression levels in cases versus controls in part to determine genes associated with a disease. Similarly, detecting case-control differences in co-expression among genes can be critical to understanding complex human diseases; however statistical methods have been limited by the high dimensional nature of this problem. In this paper, we construct a sparse-Leading-Eigenvalue-Driven (sLED) test for comparing two high-dimensional covariance matrices. By focusing on the spectrum of the differential matrix, sLED provides a novel perspective that accommodates what we assume to be common, namely sparse and weak signals in gene expression data, and it is closely related with Sparse Principal Component Analysis. We prove that sLED achieves full power asymptotically under mild assumptions, and simulation studies verify that it outperforms other existing procedures under many biologically plausible scenarios. Applying sLED to the largest gene-expression dataset obtained from post-mortem brain tissue from Schizophrenia patients and controls, we provide a novel list of genes implicated in Schizophrenia and reveal intriguing patterns in gene co-expression change for Schizophrenia subjects. We also illustrate that sLED can be generalized to compare other gene-gene “relationship” matrices that are of practical interest, such as the weighted adjacency matrices. PMID:29081874

TESTING HIGH-DIMENSIONAL COVARIANCE MATRICES, WITH APPLICATION TO DETECTING SCHIZOPHRENIA RISK GENES.

PubMed

Zhu, Lingxue; Lei, Jing; Devlin, Bernie; Roeder, Kathryn

2017-09-01

Scientists routinely compare gene expression levels in cases versus controls in part to determine genes associated with a disease. Similarly, detecting case-control differences in co-expression among genes can be critical to understanding complex human diseases; however statistical methods have been limited by the high dimensional nature of this problem. In this paper, we construct a sparse-Leading-Eigenvalue-Driven (sLED) test for comparing two high-dimensional covariance matrices. By focusing on the spectrum of the differential matrix, sLED provides a novel perspective that accommodates what we assume to be common, namely sparse and weak signals in gene expression data, and it is closely related with Sparse Principal Component Analysis. We prove that sLED achieves full power asymptotically under mild assumptions, and simulation studies verify that it outperforms other existing procedures under many biologically plausible scenarios. Applying sLED to the largest gene-expression dataset obtained from post-mortem brain tissue from Schizophrenia patients and controls, we provide a novel list of genes implicated in Schizophrenia and reveal intriguing patterns in gene co-expression change for Schizophrenia subjects. We also illustrate that sLED can be generalized to compare other gene-gene "relationship" matrices that are of practical interest, such as the weighted adjacency matrices.

Thermoresponsive scattering coating for smart white LEDs.

PubMed

Bauer, Jurica; Verbunt, Paul P C; Lin, Wan-Yu; Han, Yang; Van, My-Phung; Cornelissen, Hugo J; Yu, Joan J H; Bastiaansen, Cees W M; Broer, Dirk J

2014-12-15

White light emitting diode (LED) systems, capable of lowering the color temperature of emitted light on dimming, have been reported in the literature. These systems all use multiple color LEDs and complex control circuitry. Here we present a novel responsive lighting system based on a single white light emitting LED and a thermoresponsive scattering coating. The coated LED automatically emits light of lower correlated color temperature (CCT) when the power is reduced. We also present results on the use of multiple phosphors in the white light LED allowing for the emission of warm white light in the range between 2900 K and 4150 K, and with a chromaticity complying with the ANSI standards (C78.377). This responsive warm white light LED-system with close-to-ideal emission characteristics is highly interesting for the lighting industry.

ZnO-nanorods: A possible white LED phosphor

NASA Astrophysics Data System (ADS)

Sarangi, Sachindra Nath; T., Arun; Ray, Dinseh K.; Sahoo, Pratap Kumar; Nozaki, Shinji; Sugiyama, Noriyuki; Uchida, Kazuo

2017-05-01

The white light-emitting diodes (LEDs) have drawn much attention to replace conventional lighting sources because of low energy consumption, high light efficiency and long lifetime. Although the most common approach to produce white light is to combine a blue LED chip and a yellow phosphor, such a white LED cannot be used for a general lighting application, which requires a broad luminescence spectrum in the visible wavelength range. We have successfully chemically synthesized the ZnO nanorods showing intense broad luminescence in the visible wavelength range and made a white LED using the ZnO nanorods as phosphor excited with a blue LED. Their lengths and diameters were 2 - 10 μm and 200 - 800 nm, respectively. The wurtzite structure was confirmed by the x-ray diffraction measurement. The PL spectrum obtained by exciting the ZnO nanorods with the He-Cd laser has two peaks, one associated with the near band-edge recombination and the other with recombination via defects. The peak intensity of the near band-edge luminescence at 388 nm is much weaker than that of the defect-related luminescence. The latter luminescence peak ranges from 450 to 850 nm and broad enough to be used as a phosphor for a white LED. A white LED has been fabricated using a blue LED with 450 nm emission and ZnO nanorod powders. The LED performances show a white light emission and the electroluminescence measurement shows a stiff increase in white light intensity with increasing blue LED current. The Commission International de1'Eclairage (CIE) chromaticity colour coordinates of 450 nm LED pumped white emission shows a coordinate of (0.31, 0.32) for white LED at 350 mA. These results indicate that ZnO nanorods provides an alternate and effective approach to achieve high-performance white LEDs and also other optoelectronic devices.

An Integrated Multilevel Converter with Sigma Delta Control for LED Lighting

NASA Astrophysics Data System (ADS)

Gerber, Daniel L.

High brightness LEDs have become a mainstream lighting technology due to their efficiency, life span, and environmental benefits. As such, the lighting industry values LED drivers with low cost, small form factor, and long life span. Additional specifications that define a high quality LED driver are high efficiency, high power factor, wide-range dimming, minimal flicker, and a galvanically isolated output. The flyback LED driver is a popular topology that satisfies all these specifications, but it requires a bulky and costly flyback transformer. In addition, its passive methods for cancelling AC power ripple require electrolytic capacitors, which have been known to have life span issues. This dissertation details the design, construction, and verification of a novel LED driver that satisfies all the specifications. In addition, it does not require a flyback transformer or electrolytic capacitors, thus marking an improvement over the flyback driver on size, cost, and life span. This dissertation presents an integrated circuit (IC) LED driver, which features a pair of generalized multilevel converters that are controlled via sigma-delta modulation. The first is a multilevel rectifier responsible for power factor correction (PFC) and dimming. The PFC rectifier employs a second order sigma-delta loop to precisely control the input current harmonics and amplitude. The second is a bidirectional multilevel inverter used to cancel AC power ripple from the DC bus. This ripple-cancellation module transfers energy to and from a storage capacitor. It uses a first order sigma-delta loop with a preprogrammed waveform to swing the storage capacitor voltage. The system also contains an output stage that powers the LEDs with DC and provides for galvanic isolation. The output stage consists of an H-bridge stack that connects to the output through a small toroid transformer. The IC LED driver was simulated and prototyped on an ABCD silicon test chip. Testing and verification indicates functional performance for all the modules in the LED driver. The driver exhibits moderate efficiency at half voltage. Although the part was only testable to half voltage, loss models predict that its efficiency would be much higher at full voltage. The driver also meets specifications on the line current harmonics and ripple cancellation. This dissertation introduces multilevel circuit techniques to the IC and LED research space. The prototype's functional performance indicates that integrated multilevel converters are a viable topology for lighting and other similar applications.

Retinopathy of prematurity and induced changes in arterial oxygen saturation with near infrared spectrophotometry: a retrospective cohort study

NASA Astrophysics Data System (ADS)

von Siebenthal, K.; Keel, M.; Dietz, V.; Fauchere, J. C.; Martin, X.; Wolf, Martin; Duc, G.; Bucher, H. U.

1996-10-01

Near-infrared spectrophotometry (NIRS) is a noninvasive method for measuring oxygenated and deoxygenated hemoglobin in the neonatal brain. Using oxygen as a tracer, it is possible to calculate cerebral blood flow (cbf) and hemoglobin concentration (cHbc), which corresponds to cerebral blood volume, by inducing small changes in arterial oxygen saturation. Variability of tcpO2 is considered to be associated with severe retinopathy of prematurity (ROP). A preliminary analysis without control found a 51 percent incidence of ROP in infants subjected to NIRS measurements whereas among infants who were not exposed to oxygen changes, only 29 percent developed ROP. A controlled study with matched pairs was performed. Thirty-nine premature newborns who had received NIRS recordings were matched with 39 out of 172 infants who had not received NIRS. Using this controlled study design there was no difference in the incidence and severity of ROP between the two groups. The conclusions are that: 1) small changes in oxygen saturation of 3 to 10 percent to measure cbf and cHbc did not increase the incidence or the degree of severity of ROP. 2) A controlled study design is important. Analyses of uncontrolled data would have led to the conclusion that oxygen changes as used with NIRS increase the risk of ROP.

A retrospective study of anthrax on the Ghaap Plateau, Northern Cape province of South Africa, with special reference to the 2007-2008 outbreaks.

PubMed

Hassim, Ayesha; Dekker, Edgar H; Byaruhanga, Charles; Reardon, Tommy; Van Heerden, Henriette

2017-09-28

Anthrax is a zoonotic disease caused by the gram-positive, endospore-forming and soil-borne bacterium Bacillus anthracis. When in spore form, the organism can survive in dormancy in the environment for decades. It is a controlled disease of livestock and wild ungulates in South Africa. In South Africa, the two enzootic regions are the Kruger National Park and the Ghaap Plateau in the Northern Cape province. Farms on the Plateau span thousands of hectares comprising of wildlife - livestock mixed use farming. In 2007-2008, anthrax outbreaks in the province led to government officials intervening to aid farmers with control measures aimed at preventing further losses. Because of the ability of the organism to persist in the environment for prolonged periods, an environmental risk or isolation survey was carried out in 2012 to determine the efficacy of control measures employed during the 2007-2008, anthrax outbreaks. No B. anthracis could be isolated from the old carcass sites, even when bone fragments from the carcasses were still clearly evident. This is an indication that the control measures and protocols were apparently successful in stemming the continuity of spore deposits at previously positive carcass sites.

Bandwidth correction for LED chromaticity based on Levenberg-Marquardt algorithm

NASA Astrophysics Data System (ADS)

Huang, Chan; Jin, Shiqun; Xia, Guo

2017-10-01

Light emitting diode (LED) is widely employed in industrial applications and scientific researches. With a spectrometer, the chromaticity of LED can be measured. However, chromaticity shift will occur due to the broadening effects of the spectrometer. In this paper, an approach is put forward to bandwidth correction for LED chromaticity based on Levenberg-Marquardt algorithm. We compare chromaticity of simulated LED spectra by using the proposed method and differential operator method to bandwidth correction. The experimental results show that the proposed approach achieves an excellent performance in bandwidth correction which proves the effectiveness of the approach. The method has also been tested on true blue LED spectra.

Design and development of a LabVIEW-based LED-induced fluorescence spectroscopy system with applications in non-destructive quality assessment of agricultural products

NASA Astrophysics Data System (ADS)

Abbasi, Hamed; Nazeri, Majid; Mireei, Seyed Ahmad

2016-01-01

Over the past several years, the demand for high quality agricultural products has been remarkably increased. Thus, it is important to use non-destructive methods for product quality monitoring. LED-induced fluorescence spectroscopy has proved its potential for nondestructive detection of some defects in agricultural products, such as tissue browning and bruising. Due to such defects, changes in the polyphenol and chlorophyll contents occur which can be considered as the visible marks of decreasing fruit quality. In the present work, a fluorescence spectrometer (spectrofluorometer) controlled by LabVIEW software was designed and developed. In this spectrometer, a consumer-grade webcam was used as an imaging sensor. The spectrometer was able to measure the fluorescence spectra directly from the fruit and vegetable surface in the desired regions. To do so, the spectrometer was equipped with a suitable fiber-optic probe. The hardware solution was based on data acquisition working on the USB platform and controlled by the application running on the PC. In this system, light emitting diodes with different wavelengths were used as the excitation sources for inducing fluorescence spectra of some famous fruits and vegetables.

Comparison of Light Emitting Diodes (LED) and Fluorescent Light on Suppression of Pineal Melatonin in the Rat

NASA Technical Reports Server (NTRS)

Winget, Charles M.; Heeke, D. S.; Holley, D. C.; Mele, G.; Brainard, G. C.; Hanifin, J. P.; Rollag, M. D.; Savage, Paul D. (Technical Monitor)

1997-01-01

To validate a novel LED array for use in animal habitat lighting by comparing its effectiveness to cool-white fluorescent (CWF) lighting in suppressing pineal gland melatonin. Male Sprague-Dawley rats, 175-200 g, were maintained under control conditions for 2 weeks (food and water ad lib, 12L: 12D CWF, 18 uW/square cm). Dark adapted animals (animals before lights on) were exposed to 5 min of LED or CWF light of similar spectral power distribution. Two groups of rats (LED vs. CWF) were compared at 5 light intensities (100, 40, 1, 1.0, and 0. 1 lux). A control group was placed into the exposure apparatus but not exposed to light. After exposure, pineal glands were rapidly removed and assayed for melatonin by RIA. Results. The dark-exposed control groups matched with the 5 intensity groups (100, 40, 10, 1.0, and 0.1 lux) showed mean + SEM pineal melatonin values of 1167 +/- 136, 1569 +/- 126, 353 +/- 34, 650 +/- 124, and 464 +/- 85, pg/ml respectively. The corresponding CWF exposure data were 393 1 41, 365 +34, 257 +/- 13, 218 +/- 42, and 239 +/- 71 pg/ml, respectively. Corresponding LED exposure data were 439 +/- 25, 462 +/- 50, 231 +/- 6, 164 +/- 12, and 158 +/- 12 pg/ml, respectively. Rats exposed to both experimental light conditions at all illuminances studied showed significant melatonin suppression (p less than 0.01, ANOVA). In no case was the melatonin suppression induced by LED illuminance significantly different from the melatonin suppression elicited by the same intensity of CWF light. The results show that a novel LED light source can suppress pineal melatonin equal to that of a conventional CWF light source.

Evaluation of the impact of school gardening interventions on children's knowledge of and attitudes towards fruit and vegetables. A cluster randomised controlled trial.

PubMed

Hutchinson, Jayne; Christian, Meaghan Sarah; Evans, Charlotte Elizabeth Louise; Nykjaer, Camilla; Hancock, Neil; Cade, Janet Elizabeth

2015-08-01

Involvement of children in gardening has the potential to increase liking of fruit and vegetables (FV) and consequently, intake, but research results are mixed. School gardening led by external specialists such as the Royal Horticultural Society (RHS) could have more impact than teacher-led gardening on children's knowledge of, and attitudes towards, FV. Data from a cluster randomised controlled trial were used to compare a RHS-led school gardening intervention with a teacher-led gardening intervention amongst 7-10 year olds in 21 London schools. A short questionnaire was developed and used to identify children's knowledge and attitudes towards FV consumption before the garden intervention and 18 months afterwards. Results from multilevel regression models, both unadjusted and adjusted for baseline responses and socio-demographic factors, were reported. Attitudes to FV intake were compared between groups. Change in FV knowledge was used to predict change in FV consumption assessed using 24-hour food diaries. In comparison with the RHS-led group (n = 373), teacher-led children (n = 404) were more likely to agree they ate lots of fruit (p < 0.009) and tried new fruits (p = 0.045), but RHS-led gardening was associated with a greater increase in the total number of vegetables recognised (p = 0.031). No other differences in improvements in attitudes, or associations between change in FV recognition and intake were found. In relation to improvements in children's recognition and attitudes towards eating FV, this trial produced limited evidence that gardening activity packages led by external specialists (RHS-led) provide additional benefits over those led by teachers trained by the RHS. Indeed, the latter were potentially more effective. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of near-infrared LED therapy on experimental tooth replantation in rats.

PubMed

Pigatto Mitihiro, Débora; de Paula Ramos, Solange; Corazza Montero, Janaína; Alves Campos, Aline; de Oliveira Toginho Filho, Dari; Dezan Garbelini, Cassia Cilene

2017-02-01

Dental avulsion damages periodontal tissues and may induce dentoalveolar ankylosis and root resorption after replantation. The aim of this work was to evaluate the effects of light-emitting diode (LED) therapy after tooth replantation. The upper right incisors of 36 male Wistar rats were extracted and replanted after 15 min. The control group (Co, n = 18) was submitted to replantation and the LED group (n = 18) was submitted to replantation and LED therapy (940 nm, 4 J cm -2 ) for three consecutive days (0, 24, and 48 h). Six animals from each group were euthanized at 7, 14, and 21 days for histological analysis. The upper left incisors were used as a negative control. Data were compared using the Fisher exact test, considering P < 0.05. After 7 days, the Co (73.3%) and LED (72.2%) groups presented areas of periodontal ligament necrosis. However, periodontal ligament necrosis was more frequent in the LED group at 14 (70%, P < 0.05) and 21 days (43.2%, P < 0.05) in relation to the Co group (33 and 21.6%). Inflammatory cell infiltration was more frequent in the Co group at 7 days (100%) than the LED group (24.4%, P < 0.05), but increased in the LED group after 21 days (83.3%, P < 0.05). Bone necrosis was more frequent in the LED group after 14 (79%, P < 0.05) and 21 days (60%, P < 0.005) than in the Co group (45% and 20%). Bone repair was evident in the Co group at 14 days. All of the replanted teeth had pulp necrosis. The results suggest that the application of LED therapy up to 48 h after tooth replantation may delay periodontal ligament repair. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Light colour and intensity alters reproductive/seasonal responses in Japanese quail.

PubMed

Yadav, Suneeta; Chaturvedi, Chandra Mohini

2015-08-01

An extensive literature is available on the photoperiodic responses of avian species but studies on light colour and wavelength from light emitting diode (LED) sources on reproduction are limited. Hence, an experiment was designed to study the effect of different colours and intensities of light on the reproductive responses of Japanese quail. Three-week old quail were exposed to five different light conditions with a long photoperiod (LD 16:8): WT (white fluorescent light 100 lux as control), W LED (white light emitting diode, 30 lux), B LED (blue LED, 30 lux), G LED (green LED, 30 lux) and R-LED (red LED, 30 lux). The cloacal gland size, an indicator of androgenic activity, was monitored weekly. The results indicated an early initiation of gonadal growth in WT quail which continued and maintained a plateau throughout the period of study. On the other hand, in general low intensity light, there was a decreased amplitude of the reproductive cycle and the quail exposed to different colour lights (green, red and blue lights) used different incubation times to initiate their gonadal growth and exhibited a gonadal cycle of a different duration up to 15.5 weeks. Thereafter, the gonad of quail of all the LED groups started developing again (including the blue LED exposed quail which remained undeveloped until this age) and attained the increased degree of growth until 26.5 weeks of age. During the second cycle, gonads of green and red light exposed quail continued to increase and maintained a plateau of development similar to WT exposed control while white and blue LED exposed quail exhibited spontaneous regression and attained complete sexual quiescence. Based on our study, it is suggested that long term exposure to blue LED light of low intensity may induce gonadal regression even under long-day conditions (LD 16:8), while exposure to green and red lights appears to maintain a constant photosensitivity after one complete gonadal cycle. Copyright © 2015 Elsevier Inc. All rights reserved.

Photodynamic antimicrobial chemotherapy on Streptococcus mutans using curcumin and toluidine blue activated by a novel LED device.

PubMed

Paschoal, Marco Aurelio; Lin, Meng; Santos-Pinto, Lourdes; Duarte, Simone

2015-02-01

Photodynamic antimicrobial chemotherapy (PACT) is an antimicrobial approach that uses photosensitizers (PS) in combination with light sources at specific wavelengths aiming the production of reactive oxygen species. The long illumination time necessary to active PS is a challenge in PACT. Thus, this study investigated the antimicrobial effect of a novel single source of light-emitting diode (LED) light that covers the entire spectrum of visible light beyond interchangeable probes at high power intensity. Blue and red LED probes were used into different exposure times to active different concentrations of curcumin (C) and toluidine blue (T) on planktonic suspensions of Streptococcus mutans UA 159 (S. mutans). S. mutans were standardized and submitted to (1) PACT treatment at three concentrations of C and T exposure at three radiant exposures of a blue LED (BL) (C+BL+) and a red LED (RL) (T+RL+), (2) C (C+BL-) or T alone (T+RL-), (3) both LED lights (C-BL+ and T-RL+), and (4) neither PS nor LED illumination (control group: C-BL- and T-RL-). Aliquots of the suspensions were diluted and cultured on blood agar plates. The number of colony-forming units was calculated after 48 h. The groups submitted to PACT presented a lethal photokilling rate to all PS concentrations at tested dosimetries. The comparison to control group when PS and LED lights used alone demonstrated no decrease in the number of viable bacterial counts. The novel LED device in combination with curcumin and toluidine blue promoted an effective photoinactivation of S. mutans suspensions at ultrashort light illumination times.

White light emitting diode as potential replacement of tungsten-halogen lamp for visible spectroscopy system: a case study in the measurement of mango qualities

NASA Astrophysics Data System (ADS)

Chiong, W. L.; Omar, A. F.

2017-07-01

Non-destructive technique based on visible (VIS) spectroscopy using light emitting diode (LED) as lighting was used for evaluation of the internal quality of mango fruit. The objective of this study was to investigate feasibility of white LED as lighting in spectroscopic instrumentation to predict the acidity and soluble solids content of intact Sala Mango. The reflectance spectra of the mango samples were obtained and measured in the visible range (400-700 nm) using VIS spectroscopy illuminated under different white LEDs and tungsten-halogen lamp (pro lamp). Regression models were developed by multiple linear regression to establish the relationship between spectra and internal quality. Direct calibration transfer procedure was then applied between master and slave lighting to check on the acidity prediction results after transfer. Determination of mango acidity under white LED lighting was successfully performed through VIS spectroscopy using multiple linear regression but otherwise for soluble solids content. Satisfactory results were obtained for calibration transfer between LEDs with different correlated colour temperature indicated this technique was successfully used in spectroscopy measurement between two similar light sources in prediction of internal quality of mango.

Properties of a CdZnO/ZnO multiple quantum-well light-emitting diode

NASA Astrophysics Data System (ADS)

Liu, Zhan-Hui; Zhang, Li-Li; Li, Qing-Fang; Zhang, Rong; Xie, Zi-Li; Xiu, Xiang-Qian; Liu, Bin

2016-10-01

A CdZnO/ZnO multiple quantum-well light-emitting diode (LED) structure was successfully grown by using plasma-assisted molecular beam epitaxy on a p-GaN template that had been grown by using metal-organic chemical-vapor deposition on a c-sapphire substrate. The properties of the sample were characterized by using high-resolution X-ray diffraction, transmission electron microscopy, and temperature-dependent photoluminescence measurements. The light output performance of the CdZnO/ZnO QW LED device was also investigated in detail by using I-V and electroluminescence spectral measurements. The characterization showed that our CdZnO/ZnO QW LED structure had good crystalline quality and weaker carrier localization. Owing to the heterojunction structure, the I-V curve indicated that the LED device had a higher turn-on voltage and series resistance. The EL measurement demonstrated that for our LED device's optoelectronic characteristic, the carrier-screening effect played the dominant role in the emission-energy blue-shift mechanism, and the broadening of the emission energy width was mainly ascribed to the band-filling effect. Without a special heat sinking, the L-I curve exhibited slight efficiency droop after 30 mA.

Hybrid daylight/light-emitting diode illumination system for indoor lighting.

PubMed

Ge, Aiming; Qiu, Peng; Cai, Jinlin; Wang, Wei; Wang, Junwei

2014-03-20

A hybrid illumination method using both daylight and light-emitting diodes (LEDs) for indoor lighting is presented in this study. The daylight can be introduced into the indoor space by a panel-integration system. The daylight part and LEDs are combined within a specific luminaire that can provide uniform illumination. The LEDs can be turned on and dimmed through closed-loop control when the daylight illuminance is inadequate. We simulated the illumination and calculated the indoor lighting efficiency of our hybrid daylight and LED lighting system, and compared this with that of LED and fluorescent lighting systems. Simulation results show that the efficiency of the hybrid daylight/LED illumination method is better than that of LED and traditional lighting systems, under the same lighting conditions and lighting time; the method has hybrid lighting average energy savings of T5 66.28%, and that of the LEDs is 41.62%.

Containing air pollution and traffic congestion: Transport policy and the environment in Singapore

NASA Astrophysics Data System (ADS)

Chin, Anthony T. H.

Land transportation remains one of the main contributors of noise and air pollution in urban areas. This is in addition to traffic congestion and accidents which result in the loss of productive activity. While there is a close relationship between traffic volumes and levels of noise and air pollution, transport authorities often assume that solving traffic congestion would reduce noise and air pollutant levels. Tight control over automobile ownership and use in Singapore has contributed in improving traffic flows, travel speeds and air quality. The adoption of internationally accepted standards on automobile emissions and gasoline have been effective in reducing air pollution from motor vehicles. Demand management measures have largely focused on controlling the source of traffic congestion, i.e. private automobile ownership and its use especially within the Central Business District during the day. This paper reviews and analyzes the effectiveness of two measures which are instrumental in controlling congestion and automobile ownership, i.e. road pricing and the vehicle quota scheme (VQS). While these measures have been successful in achieving desired objectives, it has also led to the spreading of traffic externalities to other roads in the network, loss in consumer welfare and rent seeking by automobile traders.

An Integrated Circuit for Simultaneous Extracellular Electrophysiology Recording and Optogenetic Neural Manipulation.

PubMed

Chen, Chang Hao; McCullagh, Elizabeth A; Pun, Sio Hang; Mak, Peng Un; Vai, Mang I; Mak, Pui In; Klug, Achim; Lei, Tim C

2017-03-01

The ability to record and to control action potential firing in neuronal circuits is critical to understand how the brain functions. The objective of this study is to develop a monolithic integrated circuit (IC) to record action potentials and simultaneously control action potential firing using optogenetics. A low-noise and high input impedance (or low input capacitance) neural recording amplifier is combined with a high current laser/light-emitting diode (LED) driver in a single IC. The low input capacitance of the amplifier (9.7 pF) was achieved by adding a dedicated unity gain stage optimized for high impedance metal electrodes. The input referred noise of the amplifier is [Formula: see text], which is lower than the estimated thermal noise of the metal electrode. Thus, the action potentials originating from a single neuron can be recorded with a signal-to-noise ratio of at least 6.6. The LED/laser current driver delivers a maximum current of 330 mA, which is adequate for optogenetic control. The functionality of the IC was tested with an anesthetized Mongolian gerbil and auditory stimulated action potentials were recorded from the inferior colliculus. Spontaneous firings of fifth (trigeminal) nerve fibers were also inhibited using the optogenetic protein Halorhodopsin. Moreover, a noise model of the system was derived to guide the design. A single IC to measure and control action potentials using optogenetic proteins is realized so that more complicated behavioral neuroscience research and the translational neural disorder treatments become possible in the future.

Thermal energy effects on articular cartilage: a multidisciplinary evaluation

NASA Astrophysics Data System (ADS)

Kaplan, Lee D.; Ernsthausen, John; Ionescu, Dan S.; Studer, Rebecca K.; Bradley, James P.; Chu, Constance R.; Fu, Freddie H.; Farkas, Daniel L.

2002-05-01

Partial thickness articular cartilage lesions are commonly encountered in orthopedic surgery. These lesions do not have the ability to heal by themselves, due to lack of vascular supply. Several types of treatment have addressed this problem, including mechanical debridement and thermal chondroplasty. The goal of these treatments is to provide a smooth cartilage surface and prevent propagation of the lesions. Early thermal chondroplasty was performed using lasers, and yielded very mixed results, including severe damage to the cartilage, due to poor control of the induced thermal effects. This led to the development (including commercial) of probes using radiofrequency to generate the thermal effects desired for chondroplasty. Similar concerns over the quantitative aspects and control ability of the induced thermal effects in these treatments led us to test the whole range of complex issues and parameters involved. Our investigations are designed to simultaneously evaluate clinical conditions, instrument variables for existing radiofrequency probes (pressure, speed, distance, dose) as well as the associated basic science issues such as damage temperature and controllability (down to the subcellular level), damage geometry, and effects of surrounding conditions (medium, temperature, flow, pressure). The overall goals of this work are (1) to establish whether thermal chondroplasty can be used in a safe and efficacious manner, and (2) provide a prescription for multi-variable optimization of the way treatments are delivered, based on quantitative analysis. The methods used form an interdisciplinary set, to include precise mechanical actuation, high accuracy temperature and temperature gradient control and measurement, advanced imaging approaches and mathematical modeling.

Comparison of instructor-led versus peer-led debriefing in nursing students.

PubMed

Roh, Young Sook; Kelly, Michelle; Ha, Eun Ho

2016-06-01

Despite its widespread support, the most effective simulation-based debriefing method has little evidence to support its efficacy. In this study, we compared the effect of peer-led and instructor-led debriefing among nursing students. The study was conducted with a non-equivalent control group using a pretest-post-test design. A convenience sample of third-year nursing students was used for the study, where 65 students enrolled in a 2-week clinical placement rotation were randomly assigned to the instructor-led group or peer-led group. The quality of cardiopulmonary resuscitation skills, satisfaction with simulation, and quality of debriefing in the peer-led group were compared to those in the instructor-led group. Group differences at each testing interval were analyzed using independent t-test. Nursing students in the instructor-led debriefing group showed better subsequent cardiopulmonary resuscitation performance, more satisfaction with simulation experience, and higher debriefing scores compared to the peer-led group. From our study, instructor-led debriefing is an effective method in improving skills performance, inducing favorable satisfaction, and providing better quality of debriefing among nursing students. © 2016 John Wiley & Sons Australia, Ltd.

3D shape measurements with a single interferometric sensor for in-situ lathe monitoring

NASA Astrophysics Data System (ADS)

Kuschmierz, R.; Huang, Y.; Czarske, J.; Metschke, S.; Löffler, F.; Fischer, A.

2015-05-01

Temperature drifts, tool deterioration, unknown vibrations as well as spindle play are major effects which decrease the achievable precision of computerized numerically controlled (CNC) lathes and lead to shape deviations between the processed work pieces. Since currently no measurement system exist for fast, precise and in-situ 3d shape monitoring with keyhole access, much effort has to be made to simulate and compensate these effects. Therefore we introduce an optical interferometric sensor for absolute 3d shape measurements, which was integrated into a working lathe. According to the spindle rotational speed, a measurement rate of 2,500 Hz was achieved. In-situ absolute shape, surface profile and vibration measurements are presented. While thermal drifts of the sensor led to errors of several mµm for the absolute shape, reference measurements with a coordinate machine show, that the surface profile could be measured with an uncertainty below one micron. Additionally, the spindle play of 0.8 µm was measured with the sensor.

Demonstration Assessment of Light Emitting Diode (LED) Commercial Garage Lights In the Providence Portland Medical Center, Portland, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ton, My K.; Richman, Eric E.; Gilbride, Theresa L.

2008-11-11

This U.S. Department of Energy GATEWAY Demonstration project studied the applicability of light-emitting diode (LED) luminaires for commercial parking garage applications. High-pressure sodium (HPS) area luminaires were replaced with new LED area luminaires. The project was supported under the U.S. Department of Energy (DOE) Solid State Lighting Program. Other participants in the demonstration project included Providence Portland Medical Center in Portland, Oregon, the Energy Trust of Oregon, and Lighting Sciences Group (LSG) Inc. Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. PNNL manages GATEWAY demonstrations for DOE and represents their perspective in the conduct ofmore » the work. Quantitative and qualitative measurements of light and electrical power were taken at the site for both HPS and LED light sources. Economic costs were estimated and garage users’ responses to the new light sources were gauged with a survey. Six LED luminaires were installed in the below-ground parking level A, replacing six existing 150W HPS lamps spread out over two rows of parking spaces. Illuminance measurements were taken at floor level approximately every 4 ft on a 60-ft x 40-ft grid to measure light output of these LED luminaires which were termed the “Version 1” luminaires. PNNL conducted power measurements of the circuit in the garage to which the 6 luminaires were connected and determined that they drew an average of 82 W per lamp. An improved LED luminaire, Version 2, was installed in Level B of the parking garage. Illuminance measurements were not made of this second luminaire on site due to higher traffic conditions, but photometric measurements of this lamp and Version 1 were made in an independent testing laboratory and power usage for Version 2 was also measured. Version 1 was found to produce 3600 lumens and Version 2 was found to produce 4700 lumens of light and to consume 78 Watts. Maximum and minimum light levels were measured for the HPS and LED Version 1 luminaires and projected for the Version 2 luminaires. Maximum light levels were 23.51 foot candles, 20.54 fc, and 26.7 fc respectively and minimum light levels were 1.49 fc, 1.45 fc, and 1.88 fc. These results indicate very similar or even slightly higher light levels produced by the LED lamps, despite the higher lumen output of the HPS lamp. The LED lamps provide higher luminaire efficacy because all of the light is directed down and out. None of it is “lost” in the fixture. Also the HPS luminaire had poorly designed optics and a plastic covering that tended to get dirty and cracked, further decreasing the realized light output.[is this an accurate way to say this?] Consumer perceptions of the Version 2 LED were collected via a written survey form given to maintenance and security personnel. More than half felt the LED luminaires provided more light than the HPS lamps and a majority expressed a preference for the new lamps when viewing the relamped area through a security camera. Respondents commented that the LED luminaires were less glary, created less shadows, had a positive impact on visibility, and improved the overall appearance of the area. PNNL conducted an economic analysis and found that the Version 1 lamp produced annual energy savings of 955 kWh and energy cost savings of $76.39 per lamp at electricity rates of 6.5 cents per kWh and $105.03 at 11 cents per kWh. PNNL found that the Version 2 lamp produced annual energy savings of 991 kWh and energy cost savings of $79.26 per lamp at electricity rates of 6.5 cents per kWh and $108.98 at 11 cents per kWh. PNNL also calculated simple payback and found that Version 1 showed paybacks of 5.4 yrs at 6.5c/kWh and 4.1 yrs at 11c/kWh while Version 2 showed paybacks of 5.2 yrs at 6.5c/kWh and 3.9 yrs at 11c/kWh.« less

Figure of Merit Characteristics Compared to Engineering Parameters

NASA Technical Reports Server (NTRS)

Rickman, D.L.; Schrader, C.M.

2010-01-01

A workshop held in 2005 defined a large number of parameters of interest for users of lunar simulants. The need for formal requirements and standards in the manufacture and use of simulants necessitates certain features of measurements. They must be definable, measureable, useful, and primary rather than derived. There are also certain features that must be avoided. Analysis of the total parameter list led to the realization that almost all of the parameters could be tightly constrained, though not predicted, if only four properties were measured: Particle composition, particle size distribution, particle shape distribution, and bulk density. These four are collectively referred to as figures of merit (FoMs). An evaluation of how each of the parameters identified in 2005 is controlled by the four FoMs is given.

The effect of myofascial release (MFR) on an adult with idiopathic scoliosis.

PubMed

LeBauer, Aaron; Brtalik, Robert; Stowe, Katherine

2008-10-01

The lack of evidence of conservative treatment has led to an interest in exploring myofascial release (MFR) as an effective means of controlling spinal curvature progression in adolescents with idiopathic scoliosis. The purpose of this case study is to measure the effects of MFR as a manual therapy technique in the treatment of idiopathic scoliosis. One 18-year-old female subject underwent 6 weeks of MFR treatment consisting of two sessions each week for 60min. Pain, pulmonary function, and quality of life were measured. Six goniometric measurements were taken encompassing trunk flexion, extension, and rotation. The subject improved with pain levels, trunk rotation, posture, quality of life, and pulmonary function. The results suggest further investigation is needed using MFR, as an effective manual therapy treatment for idiopathic scoliosis.

LED-driven backlights for automotive displays

NASA Astrophysics Data System (ADS)

Strauch, Frank

2007-09-01

As a light source the LED has some advantage over the traditionally used fluorescence tube such as longer life or lower space consumption. Consequently customers are asking for the LED lighting design in their products. We introduced in a company owned backlight the white LED technology. This step opens the possibility to have access to the components in the display market. Instead of having a finalized display product which needs to be integrated in the head unit of a car we assemble the backlight, the glass, own electronics and the housing. A major advantage of this concept is the better control of the heat flow generated by the LEDs to the outer side because only a common housing is used for all the components. Also the requirement for slim products can be fulfilled. As always a new technology doesn't come with advantages only. An LED represents a point source compared to the well-known tube thus requiring a mixing zone for the multiple point sources when they enter a light guide. This zone can't be used in displays because of the lack of homogeneity. It's a design goal to minimize this zone which can be helped by the right choice of the LED in terms of slimness. A step ahead is the implementation of RGB LEDs because of their higher color rendering abilities. This allows for the control of the chromaticity point under temperature change but as a drawback needs a larger mixing zone.

Visual color matching system based on RGB LED light source

NASA Astrophysics Data System (ADS)

Sun, Lei; Huang, Qingmei; Feng, Chen; Li, Wei; Wang, Chaofeng

2018-01-01

In order to study the property and performance of LED as RGB primary color light sources on color mixture in visual psychophysical experiments, and to find out the difference between LED light source and traditional light source, a visual color matching experiment system based on LED light sources as RGB primary colors has been built. By simulating traditional experiment of metameric color matching in CIE 1931 RGB color system, it can be used for visual color matching experiments to obtain a set of the spectral tristimulus values which we often call color-matching functions (CMFs). This system consists of three parts: a monochromatic light part using blazed grating, a light mixing part where the summation of 3 LED illuminations are to be visually matched with a monochromatic illumination, and a visual observation part. The three narrow band LEDs used have dominant wavelengths of 640 nm (red), 522 nm (green) and 458 nm (blue) respectively and their intensities can be controlled independently. After the calibration of wavelength and luminance of LED sources with a spectrophotometer, a series of visual color matching experiments have been carried out by 5 observers. The results are compared with those from CIE 1931 RGB color system, and have been used to compute an average locus for the spectral colors in the color triangle, with white at the center. It has been shown that the use of LED is feasible and has the advantages of easy control, good stability and low cost.

Use of a control film piece in radiochromic film dosimetry.

PubMed

Aldelaijan, Saad; Alzorkany, Faisal; Moftah, Belal; Buzurovic, Ivan; Seuntjens, Jan; Tomic, Nada; Devic, Slobodan

2016-01-01

Radiochromic films change their color upon irradiation due to polymerization of the sensitive component embedded within the sensitive layer. However, agents, other than monitored radiation, can lead to a change in the color of the sensitive layer (temperature, humidity, UV light) that can be considered as a background signal and can be removed from the actual measurement by using a control film piece. In this work, we investigate the impact of the use of control film pieces on both accuracy and uncertainty of dose measured using radiochromic film based reference dosimetry protocol. We irradiated "control" film pieces (EBT3 GafChromic(TM) film model) to known doses in a range of 0.05-1 Gy, and five film pieces of the same size to 2, 5, 10, 15 and 20 Gy, considered to be "unknown" doses. Depending on a dose range, two approaches to incorporating control film piece were investigated: signal and dose corrected method. For dose values greater than 10 Gy, the increase in accuracy of 3% led to uncertainty loss of 5% by using dose corrected approach. At lower doses and signals of the order of 5%, we observed an increase in accuracy of 10% with a loss of uncertainty lower than 1% by using the corrected signal approach. Incorporation of the signal registered by the control film piece into dose measurement analysis should be a judgment call of the user based on a tradeoff between deemed accuracy and acceptable uncertainty for a given dose measurement. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Changing a dangerous rural cultural tradition: a randomized control study of youth as extra riders on tractors.

PubMed

Stoneman, Zolinda; Jinnah, Hamida Amirali; Rains, Glen C

2014-01-01

This study used a randomized control design to evaluate the effectiveness of AgTeen, an in-home, family-based farm safety intervention, in decreasing extra riding on tractors by youth. Having children as extra riders on tractors has deep roots in farm culture, but it can result in serious injury or death. The study randomized 151 families into 3 groups: parent-led intervention (fathers taught their families about farm safety), staff-led intervention (staff members who were peer farmers taught families), and a no-treatment control. Mothers, fathers, and all children aged 10-19 participated in the lessons. At study entry, 93% of youth reported that they had been an extra rider on a tractor in the past year. Although they were aware of the injury risk, fathers frequently gave tractor rides to their children. After the intervention, fathers in both AgTeen groups were less likely than control fathers to give youth tractor rides. Intervention youth were less likely than control youth to be extra riders. The intervention positively affected the extra-riding attitudes and injury risk perceptions of mothers and fathers. The parent-led and staff-led groups did not significantly differ across study outcomes. Findings confirm the effectiveness of a family-based intervention in decreasing extra riding on tractors by youth. © 2014 National Rural Health Association.

Effects of Blue Light Emitting Diode Irradiation On the Proliferation, Apoptosis and Differentiation of Bone Marrow-Derived Mesenchymal Stem Cells.

PubMed

Yuan, Ye; Yan, Gege; Gong, Rui; Zhang, Lai; Liu, Tianyi; Feng, Chao; Du, Weijie; Wang, Ying; Yang, Fan; Li, Yuan; Guo, Shuyuan; Ding, Fengzhi; Ma, Wenya; Idiiatullina, Elina; Pavlov, Valentin; Han, Zhenbo; Cai, Benzhi; Yang, Lei

2017-01-01

Blue light emitting diodes (LEDs) have been proven to affect the growth of several types of cells. The effects of blue LEDs have not been tested on bone marrow-derived mesenchymal stem cells (BMSCs), which are important for cell-based therapy in various medical fields. Therefore, the aim of this study was to determine the effects of blue LED on the proliferation, apoptosis and osteogenic differentiation of BMSCs. BMSCs were irradiated with a blue LED light at 470 nm for 1 min, 5 min, 10 min, 30 min and 60 min or not irradiated. Cell proliferation was measured by performing cell counting and EdU staining assays. Cell apoptosis was detected by TUNEL staining. Osteogenic differentiation was evaluated by ALP and ARS staining. DCFH-DA staining and γ-H2A.X immunostaining were used to measure intracellular levels of ROS production and DNA damage. Both cell counting and EdU staining assays showed that cell proliferation of BMSCs was significantly reduced upon blue LED irradiation. Furthermore, treatment of BMSCs with LED irradiation was followed by a remarkable increase in apoptosis, indicating that blue LED light induced toxic effects on BMSCs. Likewise, BMSC osteogenic differentiation was inhibited after exposure to blue LED irradiation. Further, blue LED irradiation was followed by the accumulation of ROS production and DNA damage. Taken together, our study demonstrated that blue LED light inhibited cell proliferation, inhibited osteogenic differentiation, and induced apoptosis in BMSCs, which are associated with increased ROS production and DNA damage. These findings may provide important insights for the application of LEDs in future BMSC-based therapies. © 2017 The Author(s). Published by S. Karger AG, Basel.

White Light–Emitting Diodes (LEDs) at Domestic Lighting Levels and Retinal Injury in a Rat Model

PubMed Central

Shang, Yu-Man; Wang, Gen-Shuh; Sliney, David; Lee, Li-Ling

2013-01-01

Background: Light-emitting diodes (LEDs) deliver higher levels of blue light to the retina than do conventional domestic light sources. Chronic exposure to high-intensity light (2,000–10,000 lux) has previously been found to result in light-induced retinal injury, but chronic exposure to relatively low-intensity (750 lux) light has not been previously assessed with LEDs in a rodent model. Objective: We examined LED-induced retinal neuronal cell damage in the Sprague-Dawley rat using functional, histological, and biochemical measurements. Methods: We used blue LEDs (460 nm) and full-spectrum white LEDs, coupled with matching compact fluorescent lights, for exposures. Pathological examinations included electroretinogram, hematoxylin and eosin (H&E) staining, immunohistochemistry (IHC), and transmission electron microscopy (TEM). We also measured free radical production in the retina to determine the oxidative stress level. Results: H&E staining and TEM revealed apoptosis and necrosis of photoreceptors, which indicated blue-light induced photochemical injury of the retina. Free radical production in the retina was increased in LED-exposed groups. IHC staining demonstrated that oxidative stress was associated with retinal injury. Although we found serious retinal light injury in LED groups, the compact fluorescent lamp (CFL) groups showed moderate to mild injury. Conclusion: Our results raise questions about adverse effects on the retina from chronic exposure to LED light compared with other light sources that have less blue light. Thus, we suggest a precautionary approach with regard to the use of blue-rich “white” LEDs for general lighting. Citation: Shang YM, Wang GS, Sliney D, Yang CH, Lee LL. 2014. White light–emitting diodes (LEDs) at domestic lighting levels and retinal injury in a rat model. Environ Health Perspect 122:269–276; http://dx.doi.org/10.1289/ehp.1307294 PMID:24362357

An exercise in nostalgia: Nostalgia promotes health optimism and physical activity.

PubMed

Kersten, Mike; Cox, Cathy R; Van Enkevort, Erin A

2016-10-01

Previous research has shown that nostalgia, a sentimental longing for the past, leads to greater feelings of optimism, with other work demonstrating that optimistic thinking (general & health-orientated) is associated with better physical and psychological health. Integrating these two lines of research, the current studies examined whether nostalgia-induced health optimism promotes attitudes and behaviours associated with better physical well-being. Participants, in three experiments, were randomly assigned to write about either a nostalgic or ordinary event. Following this, everyone completed a measure of health optimism (Studies 1-3), measures of health attitudes (Study 2) and had their physical activity monitored over the course of 2 weeks (Study 3). The results revealed that, in comparison to control conditions, nostalgic reverie led to greater health optimism (Studies 1-3). Further, heightened health optimism following nostalgic reflection led to more positive health attitudes (Study 2), and increased physical activity over a two-week period (i.e. Fitbit activity trackers; Study 3). These findings highlight the importance of nostalgia on health attitudes and behaviours. Specifically, this work suggests that nostalgia can be used as a mechanism to increase the importance, perceived efficacy and behaviour associated with better physical health.

Protocol for Determining Ultraviolet Light Emitting Diode (UV-LED) Fluence for Microbial Inactivation Studies.

PubMed

Kheyrandish, Ataollah; Mohseni, Madjid; Taghipour, Fariborz

2018-06-15

Determining fluence is essential to derive the inactivation kinetics of microorganisms and to design ultraviolet (UV) reactors for water disinfection. UV light emitting diodes (UV-LEDs) are emerging UV sources with various advantages compared to conventional UV lamps. Unlike conventional mercury lamps, no standard method is available to determine the average fluence of the UV-LEDs, and conventional methods used to determine the fluence for UV mercury lamps are not applicable to UV-LEDs due to the relatively low power output, polychromatic wavelength, and specific radiation profile of UV-LEDs. In this study, a method was developed to determine the average fluence inside a water suspension in a UV-LED experimental setup. In this method, the average fluence was estimated by measuring the irradiance at a few points for a collimated and uniform radiation on a Petri dish surface. New correction parameters were defined and proposed, and several of the existing parameters for determining the fluence of the UV mercury lamp apparatus were revised to measure and quantify the collimation and uniformity of the radiation. To study the effect of polychromatic output and radiation profile of the UV-LEDs, two UV-LEDs with peak wavelengths of 262 and 275 nm and different radiation profiles were selected as the representatives of typical UV-LEDs applied to microbial inactivation. The proper setup configuration for microorganism inactivation studies was also determined based on the defined correction factors.

A Nurse-Led Smoking Cessation Clinic--Quit Rate Results and Views of Participants

ERIC Educational Resources Information Center

Thompson, K. A.; Parahoo, A. K.; Blair, N.

2007-01-01

This study evaluated the success of a community nurse-led smoking cessation clinic, based in one trust in Northern Ireland. The clinic operated a group therapy approach. The study employed quantitative and qualitative methods of data collection to measure smoking behaviour and to gain the views of participants. Smoking behaviour was measured by…

The performance of quantum dots-based white light-emitting diodes

NASA Astrophysics Data System (ADS)

Chen, Kuan-Lin; Chung, Shu-Ru

2017-08-01

Recently, the investigation of quantum dots (QDs) as a color converter for white light-emitting diodes (WLEDs) application has attracted a great deal of attention. Because the narrow emission wavelength of QDs can be controlled by their particle sizes and compositions, which is facilitated to improve the color gamut of display as well as color rendering index (CRI) and the correlated color temperature (CCT) of WLEDs. In a typical commercially available LCD display, the color gamut is approximately to 75 % which is defined by the National Television System Committee (NTSC). In order to enhance NTSC, the full width at half-maximum (FWHM) of color converter should be less than 30 nm. Therefore, the QDs are the best choice for display application due to the FWHM of QDs is meet the demand of display application. In this study, the hot injection method with one-pot process is used to synthesis of colloidal ternary ZnCdSe green (G-) and red-emission (R-) QDs with a narrow emission wavelength around 537 and 610 nm. By controlling the complex reagents-stearic acid (SA) and lauric acid (LA), high performance of G- and R-QDs can be prepared. The quantum yields (QYs), particle sizes and FWHM for G- and R-QDs are 70, 30 %, 3.2 +/- 0.5, 4.1 +/- 0.5 nm and 25, 26 nm, respectively. In order to explore the performance of QDs-based WLEDs, mixing ratios effect between G-QD and R-QD are studied and the WLED is packed as conformal-type. Different ratios of R-QD and G-QD (1:10, 1:20 and 1:30) are mixed and fill up the 3020 SMD blue-InGaN LED, and named as LED-10, LED-20 and LED-30. After that, UV curable gel is deposited on the top of QD layer to form WLED and named as LED-10*, LED-20* and LED-30*. The results show that the Commission International d'Eclairage (CIE) chromaticity coordinates, color rendering index (CRI), luminous efficacy of LED-10*, LED-20* and LED-30* are (0.27, 0.21), 53, 1.9 lm/W, (0.29, 0.30), 72, 3.3 lm/W and (0.25, 0.34), 45, 6.8 lm/W, respectively. We can find that the positions of CIE can be controlled simply by adjusting the ratios of G- and R-QDs. Besides, the LED-10 and LED-20* device shows the high CRI, implying that it has great potential for application on backlight of display technology and solid-state lighting.

Uniformity of LED light illumination in application to direct imaging lithography

NASA Astrophysics Data System (ADS)

Huang, Ting-Ming; Chang, Shenq-Tsong; Tsay, Ho-Lin; Hsu, Ming-Ying; Chen, Fong-Zhi

2016-09-01

Direct imaging has widely applied in lithography for a long time because of its simplicity and easy-maintenance. Although this method has limitation of lithography resolution, it is still adopted in industries. Uniformity of UV irradiance for a designed area is an important requirement. While mercury lamps were used as the light source in the early stage, LEDs have drawn a lot of attention for consideration from several aspects. Although LED has better and better performance, arrays of LEDs are required to obtain desired irradiance because of limitation of brightness for a single LED. Several effects are considered that affect the uniformity of UV irradiance such as alignment of optics, temperature of each LED, performance of each LED due to production uniformity, and pointing of LED module. Effects of these factors are considered to study the uniformity of LED Light Illumination. Numerical analysis is performed by assuming a serious of control factors to have a better understanding of each factor.

Fertility Effects of Abortion and Birth Control Pill Access for Minors

PubMed Central

GULDI, MELANIE

2008-01-01

This article empirically assesses whether age-restricted access to abortion and the birth control pill influence minors’ fertility in the United States. There is not a strong consensus in previous literature regarding the relationship between laws restricting minors’ access to abortion and minors’ birthrates. This is the first study to recognize that state laws in place prior to the 1973 Roe v. Wade decision enabled minors to legally consent to surgical treatment—including abortion—in some states but not in others, and to construct abortion access variables reflecting this. In this article, age-specific policy variables measure either a minor’s legal ability to obtain an abortion or to obtain the birth control pill without parental involvement. I find fairly strong evidence that young women’s birthrates dropped as a result of abortion access as well as evidence that birth control pill access led to a drop in birthrates among whites. PMID:19110899

Fertility effects of abortion and birth control pill access for minors.

PubMed

Guldi, Melanie

2008-11-01

This article empirically assesses whether age-restricted access to abortion and the birth control pill influence minors' fertility in the United States. There is not a strong consensus in previous literature regarding the relationship between laws restricting minors' access to abortion and minors' birth rates. This is the first study to recognize that state laws in place prior to the 1973 Roe v. Wade decision enabled minors to legally consent to surgical treatment-including abortion-in some states but not in others, and to construct abortion access variables reflecting this. In this article, age-specific policy variables measure either a minor's legal ability to obtain an abortion or to obtain the birth control pill without parental involvement. I find fairly strong evidence that young women's birth rates dropped as a result of abortion access as well as evidence that birth control pill access led to a drop in birth rates among whites.

Key strategies for reducing spread of avian influenza among commercial poultry holdings: lessons for transmission to humans

PubMed Central

Le Menach, Arnaud; Vergu, Elisabeta; Grais, Rebecca F; Smith, David L; Flahault, Antoine

2006-01-01

Recent avian flu epidemics (A/H5N1) in Southeast Asia and case reports from around the world have led to fears of a human pandemic. Control of these outbreaks in birds would probably lead to reduced transmission of the avian virus to humans. This study presents a mathematical model based on stochastic farm-to-farm transmission that incorporates flock size and spatial contacts to evaluate the impact of control strategies. Fit to data from the recent epidemic in the Netherlands, we evaluate the efficacy of control strategies and forecast avian influenza dynamics. Our results identify high-risk areas of spread by mapping of the farm level reproductive number. Results suggest that an immediate depopulation of infected flocks following an accurate and quick diagnosis would have a greater impact than simply depopulating surrounding flocks. Understanding the relative importance of different control measures is essential for response planning. PMID:16959637

The effect of a nurse led telephone supportive care programme on patients' quality of life, received information and health care contacts after oesophageal cancer surgery-A six month RCT-follow-up study.

PubMed

Malmström, Marlene; Ivarsson, Bodil; Klefsgård, Rosemarie; Persson, Kerstin; Jakobsson, Ulf; Johansson, Jan

2016-12-01

Following oesophagectomy, a major surgical procedure, it is known that patients suffer from severely reduced quality of life and have an unmet need for postoperative support. Still, there is a lack of research testing interventions aiming to enhance the patients' life situation after this surgical procedure. The aim of the study was to evaluate the effect of a nurse led telephone supportive care programme on quality of life (QOL), received information and the number of healthcare contacts compared to conventional care following oesophageal resection for cancer. The study was designed as a randomized controlled trial (RCT) aiming to test the effect of a nurse led telephone supportive care program compared to conventional care. Patient assessments were conducted at discharge, 2 weeks, 2, 4 and 6 months after discharge and comprised evaluation of QOL, received information and the number of health care contacts. Statistical testing were conducted with repeated measurements analysis of variance to test if there were differences between the groups during follow-up. The results show that the intervention group was significantly more satisfied with received information for items concerning the information they received about things to do to help yourself, written information and for the global information score. The control group scored significantly higher on the item regarding wishing to receive more information and wish to receive less information. No effect of the intervention was shown on QOL or number of health care contacts. Proactive nurse-led telephone follow-up has a significant positive impact on the patients' experience of received information. This is likely to have a positive effect on their ability to cope with a life that may include remaining side effects and adverse symptoms for a long time after surgery. Copyright © 2016 Elsevier Ltd. All rights reserved.

An overview of LED applications for general illumination

NASA Astrophysics Data System (ADS)

Pelka, David G.; Patel, Kavita

2003-11-01

This paper begins by reviewing the current state of development of LEDs, their existing markets as well as their potential for energy conservation and their potential for gaining market share in the general illumination market. It discusses LED metrics such as chip size, lumens per watt, thermal resistance, and the recommended maximum current rating. The paper then goes on to consider the importance of non-imaging optics for both optically efficient and extremely compact LED lighting systems. Finally, microstructures useful for controlling the fields-of-view of LED lighting systems are considered and described in some detail. An extremely efficient and cost effective microstructure, called kinoform diffusers, is shown to have very unique properties that make this technology almost ideal for shaping the output beams of LED lighting systems. It concludes by illustrating some general illumination LED lighting systems

Healthy and adverse effects of plant-derived functional metabolites: the need of revealing their content and bioactivity in a complex food matrix.

PubMed

Lavecchia, Teresa; Rea, Giuseppina; Antonacci, Amina; Giardi, Maria T

2013-01-01

In recent years, both food quality and its effect on human health have become a fundamental issue all over the world. As a consequence of this new and increased awareness, American, European, and Asian policymakers have strongly encouraged the research programs on food quality and safety thematic. Attempts to improve human health and to satisfy people's desire for healthcare without intake of pharmaceuticals, has led the food industry to focus attention on functional or nutraceutical food. For a long time, compounds with nutraceutical activity have been produced chemically, but the new demands for a sustainable life have gradually led the food industry to move towards natural compounds, mainly those derived from plants. Many phytochemicals are known to promote good health, but, sometimes, undesirable effects are also reported. Furthermore, several products present on the market show few benefits and sometimes even the reverse - unhealthy effects; the evidence of efficacy is often unconvincing and epidemiological studies are necessary to prove the truth of their claims. Therefore, there is a need for reliable analytical control systems to measure the bioactivity, content, and quality of these additives in the complex food matrix. This review describes the most widespread nutraceutics and an analytical control of the same using recently developed biosensors which are promising candidates for routine control of functional foods.

Internet-based instructor-led mindfulness for work-related rumination, fatigue, and sleep: Assessing facets of mindfulness as mechanisms of change. A randomized waitlist control trial.

PubMed

Querstret, Dawn; Cropley, Mark; Fife-Schaw, Chris

2017-04-01

This study aimed to extend our theoretical understanding of how mindfulness-based interventions exert their positive influence on measures of occupational health. Employing a randomized waitlist control study design, we sought to (a) assess an Internet-based instructor-led mindfulness intervention for its effect on key factors associated with "recovery from work," specifically, work-related rumination, fatigue, and sleep quality; (b) assess different facets of mindfulness (acting with awareness, describing, nonjudging, and nonreacting) as mechanisms of change; and (c) assess whether the effect of the intervention was maintained over time by following up our participants after 3 and 6 months. Participants who completed the mindfulness intervention (n = 60) reported significantly lower levels of work-related rumination and fatigue, and significantly higher levels of sleep quality, when compared with waitlist control participants (n = 58). Effects of the intervention were maintained at 3- and 6-month follow-up with medium to large effect sizes. The effect of the intervention was primarily explained by increased levels of only 1 facet of mindfulness (acting with awareness). This study provides support for online mindfulness interventions to aid recovery from work and furthers our understanding with regard to how mindfulness interventions exert their positive effects. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Preliminary evaluation of Community-Led Total Sanitation for the control of Taenia solium cysticercosis in Katete District of Zambia.

PubMed

Bulaya, Carol; Mwape, Kabemba E; Michelo, Charles; Sikasunge, Chummy S; Makungu, Chitwambi; Gabriel, Sarah; Dorny, Pierre; Phiri, Isaac K

2015-01-30

Taenia solium taeniasis/cysticercosis is a zoonotic disease endemic in sub-Saharan Africa. It is associated with poor sanitary practices, free-range pig husbandry and lack of disease awareness in endemic communities. A comparative research was conducted with pre and post-intervention assessments in nine villages to evaluate Community-Led Total Sanitation (CLTS) as an intervention measure for the control of porcine cysticercosis in Katete District in the Eastern Province of Zambia. Blood samples were collected from pigs for circulating antigen detection and a questionnaire focused on the household was administered to a total of 153 respondents whose pigs were examined (64 pre-intervention, 89 post-intervention), in order to obtain information on general demographic characteristics, pig husbandry practices, sanitation practices and associated knowledge and awareness of T. solium infections. The first sampling was conducted prior to the implementation of the CLTS and second sampling eight months after triggering of CLTS in the selected villages. A total of 379 pig serum samples were examined using the B158/B60 Ag-ELISA to detect T. solium cysticercosis, 104 pre-intervention and 275 post-intervention, of which 14 (13.5%) and 45 (16.4%) were positive, respectively. Wald test p-values were computed to assess significant differences in the variables of interest mentioned above for the pre and post CLTS. The research revealed that CLTS as a control measure did not significantly improve T. solium infections in pigs. The research also revealed that the sanitation practices and awareness of cysticercosis did not change. It is recommended that a longer term evaluation be undertaken when the villages have been declared open defaecation free. In addition, the research recommends that health education, mass drug treatment and pig vaccination be incorporated, as an essential component of prevention and control programmes for T. solium infections. Copyright © 2014 Elsevier B.V. All rights reserved.

Engaging Direct Care Providers in Improving Infection Prevention and Control Practices Using Participatory Visual Methods.

PubMed

Backman, Chantal; Bruce, Natalie; Marck, Patricia; Vanderloo, Saskia

2016-01-01

The purpose of this quality improvement project was to determine the feasibility of using provider-led participatory visual methods to scrutinize 4 hospital units' infection prevention and control practices. Methods included provider-led photo walkabouts, photo elicitation sessions, and postimprovement photo walkabouts. Nurses readily engaged in using the methods to examine and improve their units' practices and reorganize their work environment.

Smooth light extraction in lighting optical fibre

NASA Astrophysics Data System (ADS)

Fernandez-Balbuena, A. A.; Vazquez-Molini, D.; Garcia-Botella, A.; Martinez-Anton, J. C.; Bernabeu, E.

2011-10-01

Recent advances in LED technology have relegated the use of optical fibre for general lighting, but there are several applications where it can be used as scanners lighting systems, daylight, cultural heritage lighting, sensors, explosion risky spaces, etc. Nowadays the use of high intensity LED to inject light in optical fibre increases the possibility of conjugate fibre + LED for lighting applications. New optical fibres of plastic materials, high core diameter up to 12.6 mm transmit light with little attenuation in the visible spectrum but there is no an efficient and controlled way to extract the light during the fibre path. Side extracting fibres extracts all the light on 2π angle so is not well suited for controlled lighting. In this paper we present an extraction system for mono-filament optical fibre which provides efficient and controlled light distribution. These lighting parameters can be controlled with an algorithm that set the position, depth and shape of the optical extraction system. The extraction system works by total internal reflection in the core of the fibre with high efficiency and low cost. A 10 m length prototype is made with 45° sectional cuts in the fibre core as extraction system. The system is tested with a 1W white LED illuminator in one side.

Lay-led and peer support interventions for adolescents with asthma.

PubMed

Kew, Kayleigh M; Carr, Robin; Crossingham, Iain

2017-04-19

Adolescents with asthma are at high risk of poor adherence with treatment. This may be compounded by activities that worsen asthma, in particular smoking. Additional support above and beyond routine care has the potential to encourage good self-management. We wanted to find out whether sessions led by their peers or by lay leaders help to reduce these risks and improve asthma outcomes among adolescents. To assess the safety and efficacy of lay-led and peer support interventions for adolescents with asthma. We identified trials from the Cochrane Airways Trials Register, which contains reports of randomised trials obtained from multiple electronic and handsearched sources, and we searched trial registries and reference lists of primary studies. We conducted the most recent searches on 25 November 2016. Eligible studies randomised adolescents with asthma to an intervention led by lay people or peers or to a control. We included parallel randomised controlled trials with individual or cluster designs. We included studies reported as full text, those published as abstract only and unpublished data. Two review authors screened the searches, extracted numerical data and study characteristics and assessed each included study for risk of bias. Primary outcomes were asthma-related quality of life and exacerbations requiring at least a course of oral steroids. We graded the analyses and presented evidence in a 'Summary of findings' table.We analysed dichotomous data as odds ratios, and continuous data as mean differences (MD) or standardised mean differences, all with a random-effects model. We assessed clinical, methodological and statistical heterogeneity when performing meta-analyses, and we described skewed data narratively. Five studies including a total of 1146 participants met the inclusion criteria for this review. As ever with systematic reviews of complex interventions, studies varied by design (cluster and individually randomised), duration (2.5 to 9 months), setting (school, day camp, primary care) and intervention content. Most risk of bias concerns were related to blinding and incomplete reporting, which limited the meta-analyses that could be performed. Studies generally controlled well for selection and attrition biases.All participants were between 11 and 17 years of age. Asthma diagnosis and severity varied, as did smoking prevalence. Three studies used the Triple A programme; one of these studies tested the addition of a smoke-free pledge; another delivered peer support group sessions and mp3 messaging to encourage adherence; and the third compared a peer-led asthma day camp with an equivalent camp led by healthcare practitioners.We had low confidence in all findings owing to risk of bias, inconsistency and imprecision. Results from an analysis of asthma-related quality of life based on the prespecified random-effects model were imprecise and showed no differences (MD 0.40, 95% confidence interval (CI) -0.02 to 0.81); a sensitivity analysis based on a fixed-effect model and a responder analysis suggested small benefit may be derived for this outcome. Most other results were summarised narratively and did not show an important benefit of the intervention; studies provided no analysable data on asthma exacerbations or unscheduled visits (data were skewed), and one study measuring adherence reported a drop in both groups. Effects on asthma control favoured the intervention but findings were not statistically significant. Results from two studies with high levels of baseline smoking showed some promise for self-efficacy to stop smoking, but overall nicotine dependence and smoking-related knowledge were not significantly better in the intervention group. Investigators did not report adverse events. Although weak evidence suggests that lay-led and peer support interventions could lead to a small improvement in asthma-related quality of life for adolescents, benefits for asthma control, exacerbations and medication adherence remain unproven. Current evidence is insufficient to reveal whether routine use of lay-led or peer support programmes is beneficial for adolescents receiving asthma care.Ongoing and future research may help to identify target populations for lay-led and peer support interventions, along with attributes that constitute a successful programme.

Storage flux uncertainty impact on eddy covariance net ecosystem exchange measurements

NASA Astrophysics Data System (ADS)

Nicolini, Giacomo; Aubinet, Marc; Feigenwinter, Christian; Heinesch, Bernard; Lindroth, Anders; Mamadou, Ossénatou; Moderow, Uta; Mölder, Meelis; Montagnani, Leonardo; Rebmann, Corinna; Papale, Dario

2017-04-01

Complying with several assumption and simplifications, most of the carbon budget studies based on eddy covariance (EC) measurements, quantify the net ecosystem exchange (NEE) by summing the flux obtained by EC (Fc) and the storage flux (Sc). Sc is the rate of change of CO2, within the so called control volume below the EC measurement level, given by the difference in the instantaneous profiles of concentration at the beginning and end of the EC averaging period, divided by the averaging period. While cumulating over time led to a nullification of Sc, it can be significant at short time periods. The approaches used to estimate Sc fluxes largely vary, from measurements based only on a single sampling point (usually located at the EC measurement height) to measurements based on several sampling profiles distributed within the control volume. Furthermore, the number of sampling points within each profile vary, according to their height and the ecosystem typology. It follows that measurement accuracy increases with the sampling intensity within the control volume. In this work we use the experimental dataset collected during the ADVEX campaign in which Sc flux has been measured in three similar forest sites by the use of 5 sampling profiles (towers). Our main objective is to quantify the impact of Sc measurement uncertainty on NEE estimates. Results show that different methods may produce substantially different Sc flux estimates, with problematic consequences in case high frequency (half-hourly) data are needed for the analysis. However, the uncertainty on long-term estimates may be tolerate.

A social marketing theory-based diet-education program for women ages 54 to 83 years improved dietary status.

PubMed

Francis, Sarah L; Taylor, Martha L

2009-12-01

Social Marketing Theory is a comprehensive approach of program development encompassing the needs and preferences of the intended audience. It was hypothesized a Social Marketing Theory-based, registered dietitian-led, in-home, cardiovascular disease-targeted diet-education program would improve the dietary status of community-residing older women. Using a randomized control group design, this 90-day program in two North Carolina counties included 58 women (30 control; 28 intervention) ages 54 to 83 years. Data were collected using the Mini Nutritional Assessment, three 3-day food records, and program evaluations. The intervention group received two individual registered dietitian-led in-home education sessions and the control group received education material mailings (Visits 2 and 3). Pretested education materials were used. Visits/mailings were scheduled 28 to 30 days apart. Variables measured included cardiovascular disease-related dietary practices and dietary status (Mini Nutritional Assessment). Data were analyzed using descriptive statistics, paired sample t tests, multivariant analyses, and independent t tests. Intervention and control Mini Nutritional Assessment scores improved (P=0.0001). Intervention subjects consumed more fiber than control (P=0.013) and reduced sodium intake (P=0.02). Controls reduced energy (P=0.01) and cholesterol intakes (P=0.029), likely because of the decreased food intake. The majority (n=51, 87.9%) rated the program as good to excellent and almost all (n=55, 94.8%) would recommend the program to a friend. The most popular features of the program were the individualized sessions (n=20, 34.5%) and diet analyses (n=11, 19%). These results suggest that cardiovascular disease diet-education materials utilizing Social Marketing Theory principles can lead to improved dietary status among community-residing older women.

Effect of a multi-layer infection control barrier on the micro-hardness of a composite resin

PubMed Central

HWANG, In-Nam; HONG, Sung-Ok; LEE, Bin-Na; HWANG, Yun-Chan; OH, Won-Mann; CHANG, Hoon-Sang

2012-01-01

Objective The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. Material and Methods One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LED) light curing unit (LCU) and a low-power halogen LCU. The composite specimens were photopolymerized with the LCUs and the barriers, and the micro-hardness of the upper and lower surfaces was measured (n=10). The hardness ratio was calculated by dividing the bottom surface hardness of the experimental groups by the irradiated surface hardness of the control groups. The data was analyzed by two-way ANOVA and Tukey's HSD test. Results The micro-hardness of the composite specimens photopolymerized with the LED LCU decreased significantly in the four- and eight-layer groups of the upper surface and in the two-, four-, and eight-layer groups of the lower surface. The hardness ratio of the composite specimens was <80% in the eight-layer group. The micro-hardness of the composite specimens photopolymerized with the halogen LCU decreased significantly in the eight-layer group of the upper surface and in the two-, four-, and eight-layer groups of the lower surface. However, the hardness ratios of all the composite specimens photopolymerized with barriers were <80%. Conclusions The two-layer infection control barrier could be used on high-power LCUs without decreasing the surface hardness of the composite resin. However, when using an infection control barrier on the low-power LCUs, attention should be paid so as not to sacrifice the polymerization efficiency. PMID:23138746

Design of the Lifestyle Improvement through Food and Exercise (LIFE) study: a randomized controlled trial of self-management of type 2 diabetes among African American patients from safety net health centers.

PubMed

Lynch, Elizabeth B; Liebman, Rebecca; Ventrelle, Jennifer; Keim, Kathryn; Appelhans, Bradley M; Avery, Elizabeth F; Tahsin, Bettina; Li, Hong; Shapera, Merle; Fogelfeld, Leon

2014-11-01

The Lifestyle Improvement through Food and Exercise (LIFE) study is a community-based randomized-controlled trial to measure the effectiveness of a lifestyle intervention to improve glycemic control among African Americans with type 2 diabetes attending safety net clinics. The study enrolled African American adults with a diagnosis of type 2 diabetes and HbA1c ≥ 7.0 who had attended specific safety net community clinics in the prior year. 210 patients will be enrolled and randomized to either the LIFE intervention or a standard of care control group, which consists of two dietitian-led diabetes self-management classes. The LIFE intervention was delivered in 28 group sessions over 12 months and focused on improving diet through dietitian-led culturally-tailored nutrition education, increasing physical activity through self-monitoring using an accelerometer, increasing ability to manage blood sugar through modifications to lifestyle, and providing social support for behavior change. In addition to the group sessions, peer supporters made regular telephone calls to participants to monitor progress toward behavioral goals and provide social support. The 12-month intervention phase was followed by a six-month maintenance phase consisting of two group sessions. The primary outcome of the study is change in A1C from baseline to 12 months, and an additional follow-up will occur at 18 months. The hypothesis of the study is that the participants in the LIFE intervention will show a greater improvement in glycemic control over 12 months than participants in the control group. Copyright © 2014 Elsevier Inc. All rights reserved.

Surface photonic crystal structures for LED emission modification

NASA Astrophysics Data System (ADS)

Uherek, Frantisek; Škriniarová, Jaroslava; Kuzma, Anton; Šušlik, Łuboš; Lettrichova, Ivana; Wang, Dong; Schaaf, Peter

2017-12-01

Application of photonic crystal structures (PhC) can be attractive for overall and local enhancement of light from patterned areas of the light emitting diode (LED) surface. We used interference and near-field scanning optical microscope lithography for patterning of the surface of GaAs/AlGaAs based LEDs emitted at 840 nm. Also new approach with patterned polydimethylsiloxane (PDMS) membrane applied directly on the surface of red emitting LED was investigated. The overall emission properties of prepared LED with patterned structure show enhanced light extraction efficiency, what was documented from near- and far-field measurements.

Effects of Daytime Exposure to Light from Blue-Enriched Light-Emitting Diodes on the Nighttime Melatonin Amplitude and Circadian Regulation of Rodent Metabolism and Physiology.

PubMed

Dauchy, Robert T; Wren-Dail, Melissa A; Hoffman, Aaron E; Hanifin, John P; Warfield, Benjamin; Brainard, George C; Hill, Steven M; Belancio, Victoria P; Dauchy, Erin M; Blask, David E

2016-01-01

Regular cycles of exposure to light and dark control pineal melatonin production and temporally coordinate circadian rhythms of metabolism and physiology in mammals. Previously we demonstrated that the peak circadian amplitude of nocturnal blood melatonin levels of rats were more than 6-fold higher after exposure to cool white fluorescent (CWF) light through blue-tinted (compared with clear) rodent cages. Here, we evaluated the effects of light-phase exposure of rats to white light-emitting diodes (LED), which emit light rich in the blue-appearing portion of the visible spectrum (465-485 nm), compared with standard broadspectrum CWF light, on melatonin levels during the subsequent dark phase and on plasma measures of metabolism and physiology. Compared with those in male rats under a 12:12-h light:dark cycle in CWF light, peak plasma melatonin levels at the middark phase (time, 2400) in rats under daytime LED light were over 7-fold higher, whereas midlight phase levels (1200) were low in both groups. Food and water intakes, body growth rate, and total fatty acid content of major metabolic tissues were markedly lower, whereas protein content was higher, in the LED group compared with CWF group. Circadian rhythms of arterial plasma levels of total fatty acids, glucose, lactic acid, pO 2 , pCO 2 , insulin, leptin, and corticosterone were generally lower in LED-exposed rats. Therefore, daytime exposure of rats to LED light with high blue emissions has a marked positive effect on the circadian regulation of neuroendocrine, metabolic, and physiologic parameters associated with the promotion of animal health and wellbeing and thus may influence scientific outcomes.

Healthcare provider-led interventions to support medication adherence following ACS: a meta-analysis.

PubMed

Crawshaw, Jacob; Auyeung, Vivian; Ashworth, Lucy; Norton, Sam; Weinman, John

2017-01-01

We conducted a systematic review and meta-analysis to determine the effectiveness of healthcare provider-led (HCPs) interventions to support medication adherence in patients with acute coronary syndrome (ACS). A systematic search of Cochrane Library, Medline, EMBASE, PsycINFO, Web of Science, IPA, CINAHL, ASSIA, OpenGrey, EthOS, WorldCat and PQDT was undertaken. Interventions were deemed eligible if they included adult ACS patients, were HCP-led, measured medication adherence and randomised participants to parallel groups. Intervention content was coded using the Behaviour Change Technique (BCT) Taxonomy and data were pooled for analysis using random-effects models. Our search identified 8870 records, of which 27 were eligible (23 primary studies). A meta-analysis (n=9735) revealed HCP-led interventions increased the odds of medication adherence by 54% compared to control interventions (k=23, OR 1.54, 95% CI 1.26 to 1.88, I 2 =57.5%). After removing outliers, there was a 41% increase in the odds of medication adherence with moderate heterogeneity (k=21, OR 1.41, 95% CI 1.21 to 1.65, I 2 =35.3%). Interventions that included phone contact yielded (k=12, OR 1.63, 95% CI 1.25 to 2.12, I 2 =32.0%) a larger effect compared to those delivered exclusively in person. A total of 32/93 BCTs were identified across interventions (mean=4.7, SD=2.2) with 'information about health consequences' (BCT 5.1) (19/23) the most common. HCP-led interventions for ACS patients appear to have a small positive impact on medication adherence. While we were able to identify BCTs among interventions, data were insufficient to determine the impact of particular BCTs on study effectiveness. CRD42016037706.

Healthcare provider-led interventions to support medication adherence following ACS: a meta-analysis

PubMed Central

Auyeung, Vivian; Ashworth, Lucy; Norton, Sam; Weinman, John

2017-01-01

We conducted a systematic review and meta-analysis to determine the effectiveness of healthcare provider-led (HCPs) interventions to support medication adherence in patients with acute coronary syndrome (ACS). A systematic search of Cochrane Library, Medline, EMBASE, PsycINFO, Web of Science, IPA, CINAHL, ASSIA, OpenGrey, EthOS, WorldCat and PQDT was undertaken. Interventions were deemed eligible if they included adult ACS patients, were HCP-led, measured medication adherence and randomised participants to parallel groups. Intervention content was coded using the Behaviour Change Technique (BCT) Taxonomy and data were pooled for analysis using random-effects models. Our search identified 8870 records, of which 27 were eligible (23 primary studies). A meta-analysis (n=9735) revealed HCP-led interventions increased the odds of medication adherence by 54% compared to control interventions (k=23, OR 1.54, 95% CI 1.26 to 1.88, I2=57.5%). After removing outliers, there was a 41% increase in the odds of medication adherence with moderate heterogeneity (k=21, OR 1.41, 95% CI 1.21 to 1.65, I2=35.3%). Interventions that included phone contact yielded (k=12, OR 1.63, 95% CI 1.25 to 2.12, I2=32.0%) a larger effect compared to those delivered exclusively in person. A total of 32/93 BCTs were identified across interventions (mean=4.7, SD=2.2) with ‘information about health consequences’ (BCT 5.1) (19/23) the most common. HCP-led interventions for ACS patients appear to have a small positive impact on medication adherence. While we were able to identify BCTs among interventions, data were insufficient to determine the impact of particular BCTs on study effectiveness. PROSPERO registration number CRD42016037706. PMID:29344366

Effects of Daytime Exposure to Light from Blue-Enriched Light-Emitting Diodes on the Nighttime Melatonin Amplitude and Circadian Regulation of Rodent Metabolism and Physiology

PubMed Central

Dauchy, Robert T; Wren-Dail, Melissa A; Hoffman, Aaron E; Hanifin, John P; Warfield, Benjamin; Brainard, George C; Hill, Steven M; Belancio, Victoria P; Dauchy, Erin M; Blask, David E

2016-01-01

Regular cycles of exposure to light and dark control pineal melatonin production and temporally coordinate circadian rhythms of metabolism and physiology in mammals. Previously we demonstrated that the peak circadian amplitude of nocturnal blood melatonin levels of rats were more than 6-fold higher after exposure to cool white fluorescent (CWF) light through blue-tinted (compared with clear) rodent cages. Here, we evaluated the effects of light-phase exposure of rats to white light-emitting diodes (LED), which emit light rich in the blue-appearing portion of the visible spectrum (465–485 nm), compared with standard broad-spectrum CWF light, on melatonin levels during the subsequent dark phase and on plasma measures of metabolism and physiology. Compared with those in male rats under a 12:12-h light:dark cycle in CWF light, peak plasma melatonin levels at the middark phase (time, 2400) in rats under daytime LED light were over 7-fold higher, whereas midlight phase levels (1200) were low in both groups. Food and water intakes, body growth rate, and total fatty acid content of major metabolic tissues were markedly lower, whereas protein content was higher, in the LED group compared with CWF group. Circadian rhythms of arterial plasma levels of total fatty acids, glucose, lactic acid, pO2, pCO2, insulin, leptin, and corticosterone were generally lower in LED-exposed rats. Therefore, daytime exposure of rats to LED light with high blue emissions has a marked positive effect on the circadian regulation of neuroendocrine, metabolic, and physiologic parameters associated with the promotion of animal health and wellbeing and thus may influence scientific outcomes. PMID:27780004

Photobiomodulation with light-emitting diodes improves sperm motility in men with asthenozoospermia.

PubMed

Ban Frangez, Helena; Frangez, Igor; Verdenik, Ivan; Jansa, Vid; Virant Klun, Irma

2015-01-01

Sperm motility is an important parameter of male fertility and depends on energy consumption. Photobiomodulation with light-emitting diode (LED) is known to stimulate respiratory chain in mitochondria of different mammalian cells. The aim of this research was to evaluate the effect of photobiomodulation with LED on sperm motility in infertile men with impaired sperm motility-asthenozoospermia. Thirty consecutive men with asthenozoospermia and normal sperm count who visited the infertility clinic of University Medial Centre Ljubljana between September 2011 and February 2012 were included in the study. Semen sample of each man was divided into five parts: one served as a non-treated (native) control and four parts were irradiated with LED of different wavelengths: (1) 850 nm, (2) 625, 660 and 850 nm, (3) 470 nm and (4) 625, 660 and 470 nm. The percentage of motile sperm and kinematic parameters were measured using a Sperm Class Analyser system following the WHO recommendations. In the non-treated semen samples, the average ratio of rapidly progressive sperms was 12% and of immotile sperm 73%. Treating with LED significantly increased the proportion of rapidly progressive sperm (mean differences were as follows: 2.83 (1.39-4.28), 3.33 (1.61-5.05), 4.50 (3.00-5.99) and 3.83 (2.31-5.36) for groups 1-4, respectively) and significantly decreased the ratio of immotile sperm (the mean differences and 95% CI were as follows: 3.50 (1.30-5.70), 4.33 (2.15-6.51), 5.83 (3.81-7.86) and 5.50 (2.98-8.02) for groups 1-4, respectively). All differences were highly statistically significant. This finding confirmed that photobiomodulation using LED improved the sperm motility in asthenozoospermia regardless of the wavelength.

Monolithic LED arrays, next generation smart lighting sources

NASA Astrophysics Data System (ADS)

Lagrange, Alexandre; Bono, Hubert; Templier, François

2016-03-01

LED have become the main light sources of the future as they open the path for intelligent use of light in time, intensity and color. In many usages, strong energy economy is done by adjusting these properties. The smart lighting has three dimensions, energy efficiency brought by GaN blue emitting LEDs, integration of electronics, sensors, microprocessors in the lighting system and development of new functionalities and services provided by the light. Monolithic LED arrays allow two major innovations, the spatial control of light emission and the adjustment of the electrical properties of the source.

Experimental investigation on densification behavior and surface roughness of AlSi10Mg powders produced by selective laser melting

NASA Astrophysics Data System (ADS)

Wang, Lin-zhi; Wang, Sen; Wu, Jiao-jiao

2017-11-01

Effects of laser energy density (LED) on densities and surface roughness of AlSi10Mg samples processed by selective laser melting were studied. The densification behaviors of the SLM manufactured AlSi10Mg samples at different LEDs were characterized by a solid densitometer, an industrial X-ray and CT detection system. A field emission scanning electron microscope, an automatic optical measuring system, and a surface profiler were used for measurements of surface roughness. The results show that relatively high density can be obtained with the point distance of 80-105 μm and the exposure time of 140-160 μs. The LED has an important influence on the surface morphology of the forming part, too high LED may lead to balling effect, while too low LED tends to produce defects, such as porosity and microcrack, and then affect surface roughness and porosities of the parts finally.

Programmable wireless light-emitting diode stimulator for chronic stimulation of optogenetic molecules in freely moving mice

PubMed Central

Hashimoto, Mitsuhiro; Hata, Akihiro; Miyata, Takaki; Hirase, Hajime

2014-01-01

Abstract. We produced a miniaturized, multicode, multiband, and programmable light-emitting diode (LED) stimulator for wireless control of optogenetic experiments. The LED stimulator is capable of driving three independent LEDs upon reception of an infrared (IR) signal generated by a custom-made IR transmitter. Individual LED photopulse patterns are assigned to different codes of the IR signals (up to 256 codes). The photopulse patterns can be programmed in the on-board microcontroller by specifying the parameters of duration (>1  ms), frequency (<500  Hz), and pulse width (>1  ms). The IR signals were modulated at multiple carrier frequencies to establish multiband IR transmission. Using these devices, we could remotely control the moving direction of a Thy1-ChR2-YFP transgenic mouse by transcranially illuminating the corresponding hemisphere of the primary motor cortex. IR transmitter and LED stimulator will be particularly useful in experiments where free movement or patterned concurrent stimulation is desired, such as testing social communication of rodents. PMID:26157963

A wirelessly controlled implantable LED system for deep brain optogenetic stimulation

PubMed Central

Rossi, Mark A.; Go, Vinson; Murphy, Tracy; Fu, Quanhai; Morizio, James; Yin, Henry H.

2015-01-01

In recent years optogenetics has rapidly become an essential technique in neuroscience. Its temporal and spatial specificity, combined with efficacy in manipulating neuronal activity, are especially useful in studying the behavior of awake behaving animals. Conventional optogenetics, however, requires the use of lasers and optic fibers, which can place considerable restrictions on behavior. Here we combined a wirelessly controlled interface and small implantable light-emitting diode (LED) that allows flexible and precise placement of light source to illuminate any brain area. We tested this wireless LED system in vivo, in transgenic mice expressing channelrhodopsin-2 in striatonigral neurons expressing D1-like dopamine receptors. In all mice tested, we were able to elicit movements reliably. The frequency of twitches induced by high power stimulation is proportional to the frequency of stimulation. At lower power, contraversive turning was observed. Moreover, the implanted LED remains effective over 50 days after surgery, demonstrating the long-term stability of the light source. Our results show that the wireless LED system can be used to manipulate neural activity chronically in behaving mice without impeding natural movements. PMID:25713516

Measuring and improving the quality of postoperative epidural analgesia for major abdominal surgery using statistical process control charts.

PubMed

Duncan, Fiona; Haigh, Carol

2013-10-01

To explore and improve the quality of continuous epidural analgesia for pain relief using Statistical Process Control tools. Measuring the quality of pain management interventions is complex. Intermittent audits do not accurately capture the results of quality improvement initiatives. The failure rate for one intervention, epidural analgesia, is approximately 30% in everyday practice, so it is an important area for improvement. Continuous measurement and analysis are required to understand the multiple factors involved in providing effective pain relief. Process control and quality improvement Routine prospectively acquired data collection started in 2006. Patients were asked about their pain and side effects of treatment. Statistical Process Control methods were applied for continuous data analysis. A multidisciplinary group worked together to identify reasons for variation in the data and instigated ideas for improvement. The key measure for improvement was a reduction in the percentage of patients with an epidural in severe pain. The baseline control charts illustrated the recorded variation in the rate of several processes and outcomes for 293 surgical patients. The mean visual analogue pain score (VNRS) was four. There was no special cause variation when data were stratified by surgeons, clinical area or patients who had experienced pain before surgery. Fifty-seven per cent of patients were hypotensive on the first day after surgery. We were able to demonstrate a significant improvement in the failure rate of epidurals as the project continued with quality improvement interventions. Statistical Process Control is a useful tool for measuring and improving the quality of pain management. The applications of Statistical Process Control methods offer the potential to learn more about the process of change and outcomes in an Acute Pain Service both locally and nationally. We have been able to develop measures for improvement and benchmarking in routine care that has led to the establishment of a national pain registry. © 2013 Blackwell Publishing Ltd.

Dual emissive manganese and copper Co-doped Zn-In-S quantum dots as a single color-converter for high color rendering white-light-emitting diodes.

PubMed

Yuan, Xi; Ma, Ruixin; Zhang, Wenjin; Hua, Jie; Meng, Xiangdong; Zhong, Xinhua; Zhang, Jiahua; Zhao, Jialong; Li, Haibo

2015-04-29

Novel white light emitting diodes (LEDs) with environmentally friendly dual emissive quantum dots (QDs) as single color-converters are one of the most promising high-quality solid-state lighting sources for meeting the growing global demand for resource sustainability. A facile method was developed for the synthesis of the bright green-red-emitting Mn and Cu codoped Zn-In-S QDs with an absorption bangdgap of 2.56 eV (485 nm), a large Stokes shift of 150 nm, and high emission quantum yield up to 75%, which were suitable for warm white LEDs based on blue GaN chips. The wide photoluminescence (PL) spectra composed of Cu-related green and Mn-related red emissions in the codoped QDs could be controlled by varying the doping concentrations of Mn and Cu ions. The energy transfer processes in Mn and Cu codoped QDs were proposed on the basis of the changes in PL intensity and lifetime measured by means of steady-state and time-resolved PL spectra. By integrating these bicolor QDs with commercial GaN-based blue LEDs, the as-fabricated tricolor white LEDs showed bright natural white light with a color rendering index of 95, luminous efficacy of 73.2 lm/W, and color temperature of 5092 K. These results indicated that (Mn,Cu):Zn-In-S/ZnS QDs could be used as a single color-converting material for the next generation of solid-state lighting.

Metabolic effects of green tea and of phases of weight loss.

PubMed

Diepvens, K; Kovacs, E M R; Vogels, N; Westerterp-Plantenga, M S

2006-01-30

The effect of ingestion of green tea (GT) extract along with a low-energy diet (LED) on health-related blood parameters, and the relationships among changes in metabolic parameters and phases of weight loss were assessed. A double-blind, placebo-controlled, parallel design was used. 46 female subjects (BMI 27.7+/-1.8 kg/m(2)) were fed in energy balance from days 1 to 3, followed by a LED with GT (n=23) or placebo (PLAC, n=23) from days 4 to 87. The LED-period consisted of a phase 1 of 4 weeks (days 4-32) followed by a phase 2 of 8 weeks (days 32-87). Body composition and fasting blood samples were determined on days 4, 32 and 87. No significant differences were observed between the blood parameters of the PLAC and GT group. In phase 1 compared to phase 2 the rate of weight loss was 0.09+/-0.05 kg/day vs. 0.03+/-0.03 kg/day (p<0.001); Fat free mass (FFM) was 21% of weight loss in phase 1 vs. 7% in phase 2 (ns). Surprisingly, favourable changes in free fatty acids, triacylglycerol, beta-hydroxybutyrate, glucose and total cholesterol in phase 1 were reversed in phase 2 (p<0.01). Taken together, GT supplementation during a LED had no effect on health-related blood parameters. Initial improvements in several blood measures at day 32 were reversed by day 87, despite continued weight loss. Modest weight loss improved HDL cholesterol and blood pressure.

Atmospheric Transmission and Particle Size Measurements, Proceedings of Workshop: 23-25 October 1979, Dayton Ohio

DTIC Science & Technology

1980-05-01

102 17. A Feasibility Study: Application of Lidar Transmission Measurement in the Slant Visual Range Problem - Ronald H. Kohl 108 18. Multiwavelength ...discrete filters gives greater spectral resolution over the whole band. The success of the Model 14-703 System led to the development of a more advanced...REQUIREMENTS Success in a wide range of atmospheric transmission measurement applications has led to the reqi,-st for more advanced capabilities which are listed

Evaluation of a nurse-led disease management programme for chronic kidney disease: a randomized controlled trial.

PubMed

Wong, Frances Kam Yuet; Chow, Susan Ka Yee; Chan, Tony Moon Fai

2010-03-01

Patients with end stage renal failure require dialysis and strict adherence to treatment plans to sustain life. However, non-adherence is a common and serious problem among patients with chronic kidney disease. There is a scarcity of studies in examining the effects of disease management programmes on patients with chronic kidney disease. This paper examines whether the study group receiving the disease management programme have better improvement than the control group, comparing outcomes at baseline (O1), at 7 weeks at the completion of the programme (O2) and at 13 weeks (O3). This is a randomized controlled trial. The outcome measures were non-adherence in diet, fluid, dialysis and medication, quality of life, satisfaction, symptom control, complication control and health service utilisation. There was no significant difference between the control and study group for the baseline measures, except for sleep. Significant differences (p<0.05) were found between the control and study group at O2 in the outcome measures of diet degree non-adherence, sleep, symptom, staff encouragement, overall health and satisfaction. Sustained effects at O3 were noted in the outcome measures of continuous ambulatory peritoneal dialysis (CAPD) non-adherence degree, sleep, symptom, and effect of kidney disease. Many studies exploring chronic disease management have neglected the group with end stage renal failure and this study fills this gap. This study has employed an innovative model of skill mix using specialist and general nurses and demonstrated patient improvement in diet non-adherence, CAPD non-adherence, aspects of quality of life and satisfaction with care. Redesigning chronic disease management programmes helps to optimize the use of different levels of skills and resources to bring about positive outcomes. Copyright 2009 Elsevier Ltd. All rights reserved.

Implementation-effectiveness trial of an ecological intervention for physical activity in ethnically diverse low income senior centers.

PubMed

Rich, Porchia; Aarons, Gregory A; Takemoto, Michelle; Cardenas, Veronica; Crist, Katie; Bolling, Khalisa; Lewars, Brittany; Sweet, Cynthia Castro; Natarajan, Loki; Shi, Yuyan; Full, Kelsie M; Johnson, Eileen; Rosenberg, Dori E; Whitt-Glover, Melicia; Marcus, Bess; Kerr, Jacqueline

2017-07-18

As the US population ages, there is an increasing need for evidence based, peer-led physical activity programs, particularly in ethnically diverse, low income senior centers where access is limited. The Peer Empowerment Program 4 Physical Activity' (PEP4PA) is a hybrid Type II implementation-effectiveness trial that is a peer-led physical activity (PA) intervention based on the ecological model of behavior change. The initial phase is a cluster randomized control trial randomized to either a peer-led PA intervention or usual center programming. After 18 months, the intervention sites are further randomized to continued support or no support for another 6 months. This study will be conducted at twelve senior centers in San Diego County in low income, diverse communities. In the intervention sites, 24 peer health coaches and 408 adults, aged 50 years and older, are invited to participate. Peer health coaches receive training and support and utilize a tablet computer for delivery and tracking. There are several levels of intervention. Individual components include pedometers, step goals, counseling, and feedback charts. Interpersonal components include group walks, group sharing and health tips, and monthly celebrations. Community components include review of PA resources, walkability audit, sustainability plan, and streetscape improvements. The primary outcome of interest is intensity and location of PA minutes per day, measured every 6 months by wrist and hip accelerometers and GPS devices. Secondary outcomes include blood pressure, physical, cognitive, and emotional functioning. Implementation measures include appropriateness & acceptability (perceived and actual fit), adoption & penetration (reach), fidelity (quantity & quality of intervention delivered), acceptability (satisfaction), costs, and sustainability. Using a peer led implementation strategy to deliver a multi-level community based PA program can enhance program adoption, implementation, and sustainment. ClinicalTrials.gov, USA ( NCT02405325 ). Date of registration, March 20, 2015. This website also contains all items from the World Health Organization Trial Registration Data Set.

Fiber-array based optogenetic prosthetic system for stimulation therapy

NASA Astrophysics Data System (ADS)

Gu, Ling; Cote, Chris; Tejeda, Hector; Mohanty, Samarendra

2012-02-01

Recent advent of optogenetics has enabled activation of genetically-targeted neuronal cells using low intensity blue light with high temporal precision. Since blue light is attenuated rapidly due to scattering and absorption in neural tissue, optogenetic treatment of neurological disorders may require stimulation of specific cell types in multiple regions of the brain. Further, restoration of certain neural functions (vision, and auditory etc) requires accurate spatio-temporal stimulation patterns rather than just precise temporal stimulation. In order to activate multiple regions of the central nervous system in 3D, here, we report development of an optogenetic prosthetic comprising of array of fibers coupled to independently-controllable LEDs. This design avoids direct contact of LEDs with the brain tissue and thus does not require electrical and heat isolation, which can non-specifically stimulate and damage the local brain regions. The intensity, frequency, and duty cycle of light pulses from each fiber in the array was controlled independently using an inhouse developed LabView based program interfaced with a microcontroller driving the individual LEDs. While the temporal profile of the light pulses was controlled by varying the current driving the LED, the beam profile emanating from each fiber tip could be sculpted by microfabrication of the fiber tip. The fiber array was used to stimulate neurons, expressing channelrhodopsin-2, in different locations within the brain or retina. Control of neural activity in the mice cortex, using the fiber-array based prosthetic, is evaluated from recordings made with multi-electrode array (MEA). We also report construction of a μLED array based prosthetic for spatio-temporal stimulation of cortex.

A clinical nurse specialist-led intervention to enhance medication adherence using the plan-do-check-act cycle for continuous self-improvement.

PubMed

Russell, Cynthia L

2010-01-01

A clinical nurse specialist-led intervention to improve medication adherence in chronically ill adults using renal transplant recipients as an exemplar population is proposed. Meta-analyses and systematic reviews of chronically ill and transplant patients indicate that patient-specific characteristics not only are poor and inconsistent predictors for medication nonadherence but also are not amenable to intervention. Adherence has not meaningfully improved, despite meta-analyses and systematic narrative reviews of randomized controlled trials (RCTs) dealing with medication nonadherence in acutely and chronically ill persons and RCTs dealing with transplant patients. Interventions with a superior potential to enhance medication adherence must be developed. Use of a clinical nurse specialist-led continuous self-improvement intervention with adult renal transplant recipients is proposed. Continuous self-improvement focuses on improving personal systems thinking and behavior using the plan-do-check-act process. Electronic medication monitoring reports, one of several objective measures of medication adherence, are used by the clinician to provide patient feedback during the check process on medication-taking patterns. Continuous self-improvement as an intervention holds promise in supporting patient self-management and diminishing the blame that clinicians place on patients for medication nonadherence. Using an objective measure of medication adherence such as an electronic monitoring report fosters collaborative patient-clinician discussions of daily medication-taking patterns. Through collaboration, ideas for improving medication taking can be explored. Changes can be followed and evaluated for effectiveness through the continuous self-improvement process. Future studies should include RCTs comparing educational and/or behavioral interventions to improve medication adherence.

Technical Testing of Deep-UV Solid-State Sources for Fluorescence Lifetime Measurements in the Frequency Domain

DTIC Science & Technology

2007-02-01

fluxes at wavelengths short enough for excitation of fluorescence in basic biological fluorophores and bacterial agents. In particular, deep- UV LEDs ...can be used for excitation of aromatic amino acids, whereas near- UV LEDs are suitable for excitation of autofluorescent coenzymes. The SUVOS AlGaN... LEDs as well as commercial InGaN near- UV LEDs were tested for spectral purity and the possibility of high-frequency modulation up to 200 MHz and

Hidden action or hidden strategy: China's control of its national oil companies

NASA Astrophysics Data System (ADS)

Humphrey, Charles

China's rapid economic growth has been accompanied by parallel growth in energy demand, particularly in demand for oil. Due to political and economic constraints on domestic reform, the CPC has focused on the international dimension through the creation of vertically integrated national oil companies. The foreign investments of these companies have become increasingly controversial due to the high levels of political and financial support afforded them by the CPC. I measure control by employing a model of institutional constraints on state-owned enterprises in conjunction with a managerial variant of Principal Agent theory well suited to political analyses. I conclude that the combination of institutional overlap, the process which led to the formation of the CNOCs as they currently exist and the current overseas activities of the CNOCs all demonstrate that the CPC is in control of the CNOCs.

Low-cost chlorophyll meter (LCCM): portable measuring device for leaf chlorophyll

NASA Astrophysics Data System (ADS)

Hutomo E. P., Evan; Adibawa, Marcelinus Alfasisurya S.; Prilianti, Kestrilia R.; Heriyanto, Heriyanto; Brotosudarmo, Tatas H. P.

2016-11-01

Portable leaf chlorophyll meter, named low-cost chlorophyll meter (LCCM), has been created. This device was created to help farmer determining the health condition of plant based on the greenness level of leaf surface. According to previous studies, leaf greenness with a certain amount of chlorophyll level has a direct correlation with the amount of nitrogen in the leaf that indicates health of the plant and this fact needed to provide an estimate of further measures to keep the plants healthy. Device that enables to measure the leaf color change is soil plant analysis development (SPAD) meter 502 from Konica Minolta but it is relatively expensive. To answer the need of low-cost chlorophyll scanner device, this research conducted experiment using light reflectance as the base mechanism. Reflectance system from LCCM consists of near-infrared light emitting diode (LED) and red LED as light resources and photodiode. The output from both of light resources calculated using normalized difference vegetation index (NDVI) formula as the results fetched and displayed on the smartphone application using Bluetooth communication protocol. Finally, the scanner has been made as well as the Android application named NDVI Reader. The LCCM system which has been tested on 20 sample of cassava leaf with SPAD meter as a variable control showed coefficient of determination 0.9681 and root-mean-square error (RMSE) 0.014.

Explosively Generated Plasmas: Measurement and Models of Shock Generation and Material Interactions

NASA Astrophysics Data System (ADS)

Emery, Samuel; Elert, Mark; Giannuzzi, Paul; Le, Ryan; McCarthy, Daniel; Schweigert, Igor

2017-06-01

Explosively generated plasmas (EGPs) are created by the focusing of a shock produced from an explosive driver via a conical waveguide. In the waveguide, the gases from the explosive along with the trapped air are accelerated and compressed (via Mach stemming) to such extent that plasma is produced. These EGPs have been measured in controlled experiments to achieve temperatures on the order of 1 eV and velocities as high as 25 km/s. We have conducted a combined modeling and measurement effort to increase the understanding for design purposes of the shock generation of EGPs and the interaction of EGP with explosive materials. Such efforts have led to improved measures of pressure and temperature, spatial structure of the plasma, and the decomposition/deflagration behavior of RDX upon exposure to an EGP. Funding provided by the Environmental Security Technology Certification Program (ESTCP) Munitions Response program area.

Pilot Study for UVA-LED Disinfection of Escherichia coli in Water for Space and Earth Applications

NASA Technical Reports Server (NTRS)

Ragolta, Carolina

2010-01-01

To test the efficacy of UVA-LED disinfection, a solution of Escherichia coli was pumped through a modified drip flow reactor at a flow rate of 1 ml/min. The experiment was conducted in a controlled environment chamber to ensure that temperature did not cause disinfection. The reactor featured three wells with different treatments: UVA-LED irradiation, UVA-LEDs with Ti02, and UVA-LEDs with nanosilver. Samples from each well were taken throughout a 340 hour period, inactivated, assayed, and analyzed for E. coli disinfection. Results of the duplicate experiments indicated longer exposure times are needed for UVA-LED disinfection of E. coli in water. Further research would consider a longer sampling period and different test conditions, such as increased contact area and various flow rates.

Shock Location Dominated Transonic Flight Loads on the Active Aeroelastic Wing

NASA Technical Reports Server (NTRS)

Lokos, William A.; Lizotte, Andrew; Lindsley, Ned J.; Stauf, Rick

2005-01-01

During several Active Aeroelastic Wing research flights, the shadow of the over-wing shock could be observed because of natural lighting conditions. As the plane accelerated, the shock location moved aft, and as the shadow passed the aileron and trailing-edge flap hinge lines, their associated hinge moments were substantially affected. The observation of the dominant effect of shock location on aft control surface hinge moments led to this investigation. This report investigates the effect of over-wing shock location on wing loads through flight-measured data and analytical predictions. Wing-root and wing-fold bending moment and torque and leading- and trailing-edge hinge moments have been measured in flight using calibrated strain gages. These same loads have been predicted using a computational fluid dynamics code called the Euler Navier-Stokes Three Dimensional Aeroelastic Code. The computational fluid dynamics study was based on the elastically deformed shape estimated by a twist model, which in turn was derived from in-flight-measured wing deflections provided by a flight deflection measurement system. During level transonic flight, the shock location dominated the wing trailing-edge control surface hinge moments. The computational fluid dynamics analysis based on the shape provided by the flight deflection measurement system produced very similar results and substantially correlated with the measured loads data.

Birth setting, transfer and maternal sense of control: results from the DELIVER study

PubMed Central

2014-01-01

Background In the Netherlands, low risk women receive midwife-led care and can choose to give birth at home or in hospital. There is concern that transfer of care during labour from midwife-led care to an obstetrician-led unit leads to negative birth experiences, in particular among those with planned home birth. In this study we compared sense of control, which is a major attribute of the childbirth experience, for women planning home compared to women planning hospital birth under midwife-led care. In particular, we studied sense of control among women who were transferred to obstetric-led care during labour according to planned place of birth: home versus hospital. Methods We used data from the prospective multicentre DELIVER (Data EersteLIjns VERloskunde) cohort-study, conducted in 2009 and 2010 in the Netherlands. Sense of control during labour was assessed 6 weeks after birth, using the short version of the Labour Agentry Scale (LAS-11). A higher LAS-11 score indicates a higher feeling of control. We considered a difference of a minimum of 5.5 points as clinically relevant. Results Nulliparous- and parous women who planned a home birth had a 2.6 (95% CI 1.0, 4.3) and a 3.0 (1.6, 4.4) higher LAS score during first stage of labour respectively and during second stage a higher score of 2.8 (0.9, 4.7) and 2.3 (0.6, 4.0), compared with women who planned a hospital birth. Overall, women who were transferred experienced a lower sense of control than women who were not transferred. Parous women who planned a home birth and who were transferred had a 4.3 (0.2, 8.4) higher LAS score in 2nd stage, compared to those who planned a hospital birth and who were transferred. Conclusion We found no clinically relevant differences in feelings of control among women who planned a home or hospital birth. Transfer of care during labour lowered feelings of control, but feelings of control were similar for transferred women who planned a home or hospital birth. As far as their expected sense of control is concerned, low risk women should be encouraged to give birth at the location of their preference. PMID:24438469

Optogenetic activation of neocortical neurons in vivo with a sapphire-based micro-scale LED probe.

PubMed

McAlinden, Niall; Gu, Erdan; Dawson, Martin D; Sakata, Shuzo; Mathieson, Keith

2015-01-01

Optogenetics has proven to be a revolutionary technology in neuroscience and has advanced continuously over the past decade. However, optical stimulation technologies for in vivo need to be developed to match the advances in genetics and biochemistry that have driven this field. In particular, conventional approaches for in vivo optical illumination have a limitation on the achievable spatio-temporal resolution. Here we utilize a sapphire-based microscale gallium nitride light-emitting diode (μLED) probe to activate neocortical neurons in vivo. The probes were designed to contain independently controllable multiple μLEDs, emitting at 450 nm wavelength with an irradiance of up to 2 W/mm(2). Monte-Carlo stimulations predicted that optical stimulation using a μLED can modulate neural activity within a localized region. To validate this prediction, we tested this probe in the mouse neocortex that expressed channelrhodopsin-2 (ChR2) and compared the results with optical stimulation through a fiber at the cortical surface. We confirmed that both approaches reliably induced action potentials in cortical neurons and that the μLED probe evoked strong responses in deep neurons. Due to the possibility to integrate many optical stimulation sites onto a single shank, the μLED probe is thus a promising approach to control neurons locally in vivo.

Bridging the "green gap" of LEDs: giant light output enhancement and directional control of LEDs via embedded nano-void photonic crystals.

PubMed

Tsai, Yu-Lin; Liu, Che-Yu; Krishnan, Chirenjeevi; Lin, Da-Wei; Chu, You-Chen; Chen, Tzu-Pei; Shen, Tien-Lin; Kao, Tsung-Sheng; Charlton, Martin D B; Yu, Peichen; Lin, Chien-Chung; Kuo, Hao-Chung; He, Jr-Hau

2016-01-14

Green LEDs do not show the same level of performance as their blue and red cousins, greatly hindering the solid-state lighting development, which is the so-called "green gap". In this work, nano-void photonic crystals (NVPCs) were fabricated to embed within the GaN/InGaN green LEDs by using epitaxial lateral overgrowth (ELO) and nano-sphere lithography techniques. The NVPCs act as an efficient scattering back-reflector to outcouple the guided and downward photons, which not only boost the light extraction efficiency of LEDs with an enhancement of 78% but also collimate the view angle of LEDs from 131.5° to 114.0°. This could be because of the highly scattering nature of NVPCs which reduce the interference giving rise to Fabry-Perot resonance. Moreover, due to the threading dislocation suppression and strain relief by the NVPCs, the internal quantum efficiency was increased by 25% and droop behavior was reduced from 37.4% to 25.9%. The enhancement of light output power can be achieved as high as 151% at a driving current of 350 mA. Giant light output enhancement and directional control via NVPCs point the way towards a promising avenue of solid-state lighting.

Multiple transfer standard for calibration and characterization of test setups for LED lamps and luminaires in industry

NASA Astrophysics Data System (ADS)

Sperling, A.; Meyer, M.; Pendsa, S.; Jordan, W.; Revtova, E.; Poikonen, T.; Renoux, D.; Blattner, P.

2018-04-01

Proper characterization of test setups used in industry for testing and traceable measurement of lighting devices by the substitution method is an important task. According to new standards for testing LED lamps, luminaires and modules, uncertainty budgets are requested because in many cases the properties of the device under test differ from the transfer standard used, which may cause significant errors, for example if a LED-based lamp is tested or calibrated in an integrating sphere which was calibrated with a tungsten lamp. This paper introduces a multiple transfer standard, which was designed not only to transfer a single calibration value (e.g. luminous flux) but also to characterize test setups used for LED measurements with additional provided and calibrated output features to enable the application of the new standards.

Testing a high-power LED based light source for hyperspectral imaging microscopy

NASA Astrophysics Data System (ADS)

Klomkaew, Phiwat; Mayes, Sam A.; Rich, Thomas C.; Leavesley, Silas J.

2017-02-01

Our lab has worked to develop high-speed hyperspectral imaging systems that scan the fluorescence excitation spectrum for biomedical imaging applications. Hyperspectral imaging can be used in remote sensing, medical imaging, reaction analysis, and other applications. Here, we describe the development of a hyperspectral imaging system that comprised an inverted Nikon Eclipse microscope, sCMOS camera, and a custom light source that utilized a series of high-power LEDs. LED selection was performed to achieve wavelengths of 350-590 nm. To reduce scattering, LEDs with low viewing angles were selected. LEDs were surface-mount soldered and powered by an RCD. We utilized 3D printed mounting brackets to assemble all circuit components. Spectraradiometric calibration was performed using a spectrometer (QE65000, Ocean Optics) and integrating sphere (FOIS-1, Ocean Optics). Optical output and LED driving current were measured over a range of illumination intensities. A normalization algorithm was used to calibrate and optimize the intensity of the light source. The highest illumination power was at 375 nm (3300 mW/cm2), while the lowest illumination power was at 515, 525, and 590 nm (5200 mW/cm2). Comparing the intensities supplied by each LED to the intensities measured at the microscope stage, we found there was a great loss in power output. Future work will focus on using two of the same LEDs to double the power and finding more LED and/or laser diodes and chips around the range. This custom hyperspectral imaging system could be used for the detection of cancer and the identification of biomolecules.

Safety assessment of near infrared light emitting diodes for diffuse optical measurements

PubMed Central

Bozkurt, Alper; Onaral, Banu

2004-01-01

Background Near infrared (NIR) light has been used widely to monitor important hemodynamic parameters in tissue non-invasively. Pulse oximetry, near infrared spectroscopy, and diffuse optical tomography are examples of such NIR light-based applications. These and other similar applications employ either lasers or light emitting diodes (LED) as the source of the NIR light. Although the hazards of laser sources have been addressed in regulations, the risk of LED sources in such applications is still unknown. Methods Temperature increase of the human skin caused by near infrared LED has been measured by means of in-vivo and in-vitro experiments. Effects of the conducted and radiated heat in the temperature increase have been analyzed separately. Results Elevations in skin temperature up to 10°C have been observed. The effect of radiated heat due to NIR absorption is low – less than 0.5°C – since emitted light power is comparable to the NIR part of sunlight. The conducted heat due to semiconductor junction of the LED can cause temperature increases up to 9°C. It has been shown that adjusting operational parameters by amplitude modulating or time multiplexing the LED decreases the temperature increase of the skin significantly. Conclusion In this study, we demonstrate that the major risk source of the LED in direct contact with skin is the conducted heat of the LED semiconductor junction, which may cause serious skin burns. Adjusting operational parameters by amplitude modulating or time multiplexing the LED can keep the LED within safe temperature ranges. PMID:15035670

Consideration of online rainfall measurement and nowcasting for RTC of the combined sewage system.

PubMed

Rouault, P; Schroeder, K; Pawlowsky-Reusing, E; Reimer, E

2008-01-01

In Berlin, Germany, the demand for enhanced protection of the environment and the growing economic pressure have led to an increased application of control concepts within the sewage system. A global control strategy to regulate the pumpage of the combined sewage system to the treatment plant was developed and evaluated in a theoretical study. The objective was to reduce CSO. In this paper an extension of the existing control algorithm by information from online rainfall measurement and radar nowcasting is described. The rainfall information is taken into account by two additive terms describing the predicted volume from rainfall runoff. On the basis of numerical simulation the potential of these two complementary forecast terms in the global control algorithm to further reduce CSO is evaluated. The investigations are based on long-time simulations that are conducted with the dynamic flow routing model InfoWorks for three subcatchments of the Berlin drainage system. The results show that at the current Berlin system a CSO reduction of only 0.8% is possible. The effect of the forecast terms is limited by operational constraints. Limits are set to both, the delivery from each individual pump station and the total pumpage to the treatment plant.

A Wirelessly Powered and Controlled Device for Optical Neural Control of Freely-Behaving Animals

PubMed Central

Wentz, Christian T.; Bernstein, Jacob G.; Monahan, Patrick; Guerra, Alexander; Rodriguez, Alex; Boyden, Edward S.

2011-01-01

Optogenetics, the ability to use light to activate and silence specific neuron types within neural networks in vivo and in vitro, is revolutionizing neuroscientists’ capacity to understand how defined neural circuit elements contribute to normal and pathological brain functions. Typically awake behaving experiments are conducted by inserting an optical fiber into the brain, tethered to a remote laser, or by utilizing an implanted LED, tethered to a remote power source. A fully wireless system would enable chronic or longitudinal experiments where long duration tethering is impractical, and would also support high-throughput experimentation. However, the high power requirements of light sources (LEDs, lasers), especially in the context of the high-frequency pulse trains often desired in experiments, precludes battery-powered approaches from being widely applicable. We have developed a headborne device weighing 2 grams capable of wirelessly receiving power using a resonant RF power link and storing the energy in an adaptive supercapacitor circuit, which can algorithmically control one or more headborne LEDs via a microcontroller. The device can deliver approximately 2W of power to the LEDs in steady state, and 4.3W in bursts. We also present an optional radio transceiver module (1 gram) which, when added to the base headborne device, enables real-time updating of light delivery protocols; dozens of devices can be simultaneously controlled from one computer. We demonstrate use of the technology to wirelessly drive cortical control of movement in mice. These devices may serve as prototypes for clinical ultra-precise neural prosthetics that use light as the modality of biological control. PMID:21701058

Parental overprotection and interpersonal behavior in generalized social phobia.

PubMed

Taylor, Charles T; Alden, Lynn E

2006-03-01

Forty-one people with generalized social phobia (GSP) and 42 community controls completed a measure of social developmental experiences and then participated in a social interaction with an experimental assistant whose behavior was either friendly or ambiguous. Following the interaction, confederates rated participants' behavior and their desire to interact with their partner again. In people with social phobia, but not controls, perceptions of parental overprotection were associated with less responsiveness to partner behavior. Moreover, failure to reciprocate the friendly partner's behavior led to social rejection. The results support the value of incorporating social developmental concepts into cognitive-behavioral models of social phobia and highlight the contribution of social learning experiences to the development of maladaptive interpersonal behavior in these individuals.

Retinal endoilluminator toxicity of xenon and light-emitting diode (LED) light source: rabbit model.

PubMed

Aydin, Bahri; Dinç, Erdem; Yilmaz, S Necat; Altiparmak, U Emrah; Yülek, Fatma; Ertekin, Sevda; Yilmaz, Mustafa; Yakın, Mehmet

2014-09-01

This study evaluates retinal toxicity due to endoillumination with the light-emitting diode (LED) light source in comparison to endoillumination with xenon light source. Twenty-five eyes of 14 New Zealand pigmented rabbits were used in the study. The LED light (Omesis Medical Systems, Turkey) group was composed of 7 right eyes, while the other 7 right eyes constituted the xenon group (420 nm filter, 357mW/cm(2)) (Bright Star; DORC, Zuidland, Netherlands). Eleven untreated left eyes composed the control group. Twenty gauge pars plana incision 1.5 mm behind the limbus was performed in the right eyes. Twenty gauge bullet type fiberoptic endoilluminator was inserted into the eye from the incision without any pars plana vitrectomy. Fiberoptic endoilluminator was placed in such a way that it was directed toward visual streak of the rabbit retina with a 5 mm distance to retinal surface. Endoillumination was then applied for 20 min with a maximum light intensity for LED and xenon light. In left control eyes, no surgical procedure and no endoillumination were performed. One week after the endoillumination procedure, both eyes of the rabbits were enucleated following electroretinography. Sections stained with hematoxylin and eosin to evaluate morphologic changes. Retina tissues were assessed by active caspase-3 staining. There was no difference in the shape of the waveforms recorded in the eyes endoilluminated with LED light and xenon light sources compared to control eyes both before and after endoillumination application (p > 0.05). Microscopic evaluation of the retinas with hematoxylin and eosin staining demonstrated that all study groups have normal histologic properties similar to control group. No apoptosis positive cells were found within all sections in all groups. When the LED light source is used with maximum power and limited duration for endoillumination in rabbit eyes it does not produce phototoxic effects that may be detectable by electrophysiology and histology similar to xenon light.

Noniterative algorithm for improving the accuracy of a multicolor-light-emitting-diode-based colorimeter.

PubMed

Yang, Pao-Keng

2012-05-01

We present a noniterative algorithm to reliably reconstruct the spectral reflectance from discrete reflectance values measured by using multicolor light emitting diodes (LEDs) as probing light sources. The proposed algorithm estimates the spectral reflectance by a linear combination of product functions of the detector's responsivity function and the LEDs' line-shape functions. After introducing suitable correction, the resulting spectral reflectance was found to be free from the spectral-broadening effect due to the finite bandwidth of LED. We analyzed the data for a real sample and found that spectral reflectance with enhanced resolution gives a more accurate prediction in the color measurement.

Noniterative algorithm for improving the accuracy of a multicolor-light-emitting-diode-based colorimeter

NASA Astrophysics Data System (ADS)

Yang, Pao-Keng

2012-05-01

We present a noniterative algorithm to reliably reconstruct the spectral reflectance from discrete reflectance values measured by using multicolor light emitting diodes (LEDs) as probing light sources. The proposed algorithm estimates the spectral reflectance by a linear combination of product functions of the detector's responsivity function and the LEDs' line-shape functions. After introducing suitable correction, the resulting spectral reflectance was found to be free from the spectral-broadening effect due to the finite bandwidth of LED. We analyzed the data for a real sample and found that spectral reflectance with enhanced resolution gives a more accurate prediction in the color measurement.

Anterior Glenohumeral Laxity and Stiffness After a Shoulder-Strengthening Program in Collegiate Cheerleaders

PubMed Central

Laudner, Kevin G; Metz, Betsy; Thomas, David Q

2013-01-01

Context Approximately 62% of all cheerleaders sustain some type of orthopaedic injury during their cheerleading careers. Furthermore, the occurrence of such injuries has led to inquiry regarding optimal prevention techniques. One possible cause of these injuries may be related to inadequate conditioning in cheerleaders. Objective To determine whether a strength and conditioning program produces quantifiable improvements in anterior glenohumeral (GH) laxity and stiffness. Design Descriptive laboratory study. Setting University laboratory. Patients or Other Participants A sample of 41 collegiate cheerleaders (24 experimental and 17 control participants) volunteered. No participants had a recent history (in the past 6 months) of upper extremity injury or any history of upper extremity surgery. Intervention(s) The experimental group completed a 6-week strength and conditioning program between the pretest and posttest measurements; the control group did not perform any strength training between tests. Main Outcome Measure(s) We measured anterior GH laxity and stiffness with an instrumented arthrometer. We conducted a group × time analysis of variance with repeated measures on time (P < .05) to determine differences between groups. Results A significant interaction was demonstrated, with the control group having more anterior GH laxity at the posttest session than the strengthening group (P = .03, partial η2 = 0.11). However, no main effect for time (P = .92) or group (P = .97) was observed. In another significant interaction, the control group had less anterior GH stiffness at the posttest session than the strengthening group (P = .03, partial η2 = 0.12). Main effects for time (P = .02) and group (P = .004) were also significant. Conclusions Cheerleaders who participate in a shoulder-strengthening program developed less anterior GH laxity and more stiffness than cheerleaders in the control group. PMID:23672322

A Novel Methodology for Measurements of an LED's Heat Dissipation Factor

NASA Astrophysics Data System (ADS)

Jou, R.-Y.; Haung, J.-H.

2015-12-01

Heat generation is an inevitable byproduct with high-power light-emitting diode (LED) lighting. The increase in junction temperature that accompanies the heat generation sharply degrades the optical output of the LED and has a significant negative influence on the reliability and durability of the LED. For these reasons, the heat dissipation factor, Kh, is an important factor in modeling and thermal design of LED installations. In this study, a methodology is proposed and experiments are conducted to determine LED heat dissipation factors. Experiments are conducted for two different brands of LED. The average heat dissipation factor of the Edixeon LED is 0.69, and is 0.60 for the OSRAM LED. By using the developed test method and comparing the results to the calculated luminous fluxes using theoretical equations, the interdependence of optical, electrical, and thermal powers can be predicted with a reasonable accuracy. The difference between the theoretical and experimental values is less than 9 %.

Automated platform for determination of LEDs spatial radiation pattern

NASA Astrophysics Data System (ADS)

Vladescu, Marian; Vuza, Dan Tudor

2015-02-01

Nowadays technologies lead to remarkable properties of the light-emitting diodes (LEDs), making them attractive for more and more applications, such as: interior and exterior lighting, outdoor LED panels, traffic signals, automotive (tail and brake lights, backlighting in dashboard and switches), backlighting of display panels, LCD displays, symbols on switches, keyboards, graphic boards and measuring scales. Usually, LEDs are small light sources consisting of a chip placed into a package, which may bring additional optics to this encapsulated ensemble, resulting in a less or more complex spatial distribution of the light intensity, with particular radiation patterns. This paper presents an automated platform designed to allow a quick and accurate determination of the spatial radiation patterns of LEDs encapsulated in various packages. Keywords: LED, luminous

Electronic constant current and current pulse signal generator for nuclear instrumentation testing

DOEpatents

Brown, R.A.

1994-04-19

Circuitry is described for testing the ability of an intermediate range nuclear instrument to detect and measure a constant current and a periodic current pulse. The invention simulates the resistance and capacitance of the signal connection of a nuclear instrument ion chamber detector and interconnecting cable. An LED flasher/oscillator illuminates an LED at a periodic rate established by a timing capacitor and circuitry internal to the flasher/oscillator. When the LED is on, a periodic current pulse is applied to the instrument. When the LED is off, a constant current is applied. An inductor opposes battery current flow when the LED is on. 1 figures.

Electronic constant current and current pulse signal generator for nuclear instrumentation testing

DOEpatents

Brown, Roger A.

1994-01-01

Circuitry for testing the ability of an intermediate range nuclear instrut to detect and measure a constant current and a periodic current pulse. The invention simulates the resistance and capacitance of the signal connection of a nuclear instrument ion chamber detector and interconnecting cable. An LED flasher/oscillator illuminates an LED at a periodic rate established by a timing capacitor and circuitry internal to the flasher/oscillator. When the LED is on, a periodic current pulse is applied to the instrument. When the LED is off, a constant current is applied. An inductor opposes battery current flow when the LED is on.