Digital electronic engine control F-15 overview

NASA Technical Reports Server (NTRS)

Kock, B.

1984-01-01

A flight test evaluation of the digital elctronic engine control (DEEC) system was conducted. An overview of the flight program is presented. The roles of the participating parties, the system, and the flight program objectives are described. The test program approach is discussed, and the engine performance benefits are summarized. A description of the follow-on programs is included.

Solar power satellite system definition study, phase 2. Volume 2: Reference system description

NASA Technical Reports Server (NTRS)

1979-01-01

System descriptions and cost estimates for the reference system of the solar power satellite program are presented. The reference system is divided into five principal elements: the solar power satellites; space construction and support; space and ground transportation; ground receiving stations; and operations control. The program scenario and non-recurring costs are briefly described.

Sigma 2 Graphic Display Software Program Description

NASA Technical Reports Server (NTRS)

Johnson, B. T.

1973-01-01

A general purpose, user oriented graphic support package was implemented. A comprehensive description of the two software components comprising this package is given: Display Librarian and Display Controller. These programs have been implemented in FORTRAN on the XDS Sigma 2 Computer Facility. This facility consists of an XDS Sigma 2 general purpose computer coupled to a Computek Display Terminal.

A user's guide to the Flexible Spacecraft Dynamics and Control Program

NASA Technical Reports Server (NTRS)

Fedor, J. V.

1984-01-01

A guide to the use of the Flexible Spacecraft Dynamics Program (FSD) is presented covering input requirements, control words, orbit generation, spacecraft description and simulation options, and output definition. The program can be used in dynamics and control analysis as well as in orbit support of deployment and control of spacecraft. The program is applicable to inertially oriented spinning, Earth oriented or gravity gradient stabilized spacecraft. Internal and external environmental effects can be simulated.

Slave finite element for non-linear analysis of engine structures. Volume 2: Programmer's manual and user's manual

NASA Technical Reports Server (NTRS)

Witkop, D. L.; Dale, B. J.; Gellin, S.

1991-01-01

The programming aspects of SFENES are described in the User's Manual. The information presented is provided for the installation programmer. It is sufficient to fully describe the general program logic and required peripheral storage. All element generated data is stored externally to reduce required memory allocation. A separate section is devoted to the description of these files thereby permitting the optimization of Input/Output (I/O) time through efficient buffer descriptions. Individual subroutine descriptions are presented along with the complete Fortran source listings. A short description of the major control, computation, and I/O phases is included to aid in obtaining an overall familiarity with the program's components. Finally, a discussion of the suggested overlay structure which allows the program to execute with a reasonable amount of memory allocation is presented.

Design of conveyor type machine with numerical control for manufacturing of extrusion thermoplastic thread

NASA Astrophysics Data System (ADS)

Gorbunova, T. N.; Koltunov, I. I.; Tumanova, M. B.

2018-05-01

The article is devoted to the development of a model and control program for a 3D printer working based on extrusion technology. The article contains descriptions of all components of the machine and blocks of the interface of the control program.

40 CFR 65.164 - Performance test and flare compliance determination notifications and reports.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Closed Vent Systems, Control Devices, and Routing to a Fuel Gas System or a Process § 65.164 Performance test and flare... complete test report shall include a brief process description, sampling site description, description of...

System For Research On Multiple-Arm Robots

NASA Technical Reports Server (NTRS)

Backes, Paul G.; Hayati, Samad; Tso, Kam S.; Hayward, Vincent

1991-01-01

Kali system of computer programs and equipment provides environment for research on distributed programming and distributed control of coordinated-multiple-arm robots. Suitable for telerobotics research involving sensing and execution of low level tasks. Software and configuration of hardware designed flexible so system modified easily to test various concepts in control and programming of robots, including multiple-arm control, redundant-arm control, shared control, traded control, force control, force/position hybrid control, design and integration of sensors, teleoperation, task-space description and control, methods of adaptive control, control of flexible arms, and human factors.

Digital program for solving the linear stochastic optimal control and estimation problem

NASA Technical Reports Server (NTRS)

Geyser, L. C.; Lehtinen, B.

1975-01-01

A computer program is described which solves the linear stochastic optimal control and estimation (LSOCE) problem by using a time-domain formulation. The LSOCE problem is defined as that of designing controls for a linear time-invariant system which is disturbed by white noise in such a way as to minimize a performance index which is quadratic in state and control variables. The LSOCE problem and solution are outlined; brief descriptions are given of the solution algorithms, and complete descriptions of each subroutine, including usage information and digital listings, are provided. A test case is included, as well as information on the IBM 7090-7094 DCS time and storage requirements.

Controls-Structures Interaction (CSI) technology program summary. Earth orbiting platforms program area of the space platforms technology program

NASA Technical Reports Server (NTRS)

Newsom, Jerry R.

1991-01-01

Control-Structures Interaction (CSI) technology embraces the understanding of the interaction between the spacecraft structure and the control system, and the creation and validation of concepts, techniques, and tools, for enabling the interdisciplinary design of an integrated structure and control system, rather than the integration of a structural design and a control system design. The goal of this program is to develop validated CSI technology for integrated design/analysis and qualification of large flexible space systems and precision space structures. A description of the CSI technology program is presented.

19 CFR 192.11 - Description of the AES.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Description of the AES. 192.11 Section 192.11... TREASURY (CONTINUED) EXPORT CONTROL Filing of Export Information Through the Automated Export System (AES) § 192.11 Description of the AES. AES is a voluntary program that allows all exporters required to report...

19 CFR 192.11 - Description of the AES.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Description of the AES. 192.11 Section 192.11... TREASURY (CONTINUED) EXPORT CONTROL Filing of Export Information Through the Automated Export System (AES) § 192.11 Description of the AES. AES is a voluntary program that allows all exporters required to report...

19 CFR 192.11 - Description of the AES.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Description of the AES. 192.11 Section 192.11... TREASURY (CONTINUED) EXPORT CONTROL Filing of Export Information Through the Automated Export System (AES) § 192.11 Description of the AES. AES is a voluntary program that allows all exporters required to report...

19 CFR 192.11 - Description of the AES.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Description of the AES. 192.11 Section 192.11... TREASURY (CONTINUED) EXPORT CONTROL Filing of Export Information Through the Automated Export System (AES) § 192.11 Description of the AES. AES is a voluntary program that allows all exporters required to report...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

77 FR 43353 - Renewal of Agency Information Collection for Tribal Self-Governance Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-24

... collection of information for Tribal Self-Governance Program authorized by OMB Control Number 1076-0143. This... Number: 1076-0143. Title: Tribal Self-Governance program, 25 CFR 1000. Brief Description of Collection...

Preparing Native American Counselors for the Chemically Dependent Native American.

ERIC Educational Resources Information Center

Tamminen, Armas W.; And Others

1980-01-01

Describes a training program for counselors of alcoholics, presenting factors contributing to program effectiveness, a description of program classes, and outcome data regarding completion and employment. Involvement in and control by local tribal government are the key to a successful program. (Author/NRB)

PWR PRELIMINARY DESIGN FOR PL-3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphries, G. E.

1962-02-28

The pressurized water reactor preliminary design, the preferred design developed under Phase I of the PL-3 contract, is presented. Plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentatlon description, shielding description, auxiliary systems, power plant equipment, waste dispusal, buildings and tunnels, services, operation and maintenance, logistics, erection, cost information, and a training program outline are given. (auth)

77 FR 62515 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-15

... Disease Control and Prevention (CDC). Background and Brief Description Cardiovascular disease (CVD), which... program is at reducing the burden of cardiovascular disease risk factors among women who utilize program... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [60Day-13-0612...

75 FR 8365 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... respondents respondent (in hours) Diabetes Prevention and Control Programs Annual Report 53 1 51 Semi-Annual... Project Automated Management Information System (MIS) for Diabetes Prevention and Control Programs (OMB No... Description Diabetes is the seventh leading cause of death in the United States. To reduce the burden of this...

A description of a system of programs for mathematically processing on unified series (YeS) computers photographic images of the Earth taken from spacecraft

NASA Technical Reports Server (NTRS)

Zolotukhin, V. G.; Kolosov, B. I.; Usikov, D. A.; Borisenko, V. I.; Mosin, S. T.; Gorokhov, V. N.

1980-01-01

A description of a batch of programs for the YeS-1040 computer combined into an automated system for processing photo (and video) images of the Earth's surface, taken from spacecraft, is presented. Individual programs with the detailed discussion of the algorithmic and programmatic facilities needed by the user are presented. The basic principles for assembling the system, and the control programs are included. The exchange format within whose framework the cataloging of any programs recommended for the system of processing will be activated in the future is displayed.

ATLAS, an integrated structural analysis and design system. Volume 2: System design document

NASA Technical Reports Server (NTRS)

Erickson, W. J. (Editor)

1979-01-01

ATLAS is a structural analysis and design system, operational on the Control Data Corporation 6600/CYBER computers. The overall system design, the design of the individual program modules, and the routines in the ATLAS system library are described. The overall design is discussed in terms of system architecture, executive function, data base structure, user program interfaces and operational procedures. The program module sections include detailed code description, common block usage and random access file usage. The description of the ATLAS program library includes all information needed to use these general purpose routines.

Control of small phased-array antennas

NASA Technical Reports Server (NTRS)

Doland, G. D.

1978-01-01

Series of reports, patent descriptions, calculator programs, and other literature describes antenna control and steering apparatus for seven-element phased array. Though series contains information specific to particular system, it illustrates methods that can be applied to antennas with greater or fewer numbers of elements. Included are programs for calculating beam parameters and design functions and information to interfacing digital controller to beam-steering apparatus.

Elements of an Asbestos Operations and Maintenance (O&M) Program

EPA Pesticide Factsheets

Links to descriptions of Elements of an Operations and Maintenance (O&M) Program: Training, Occupant Notification, Monitoring ACM, Job-Site Controls for Work Involving ACM, Safe Work Practices, Recordkeeping, Worker Protection.

Drafting Lab Management Guide.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Instructional Materials Lab.

This manual was developed to guide drafting instructors and vocational supervisors in sequencing laboratory instruction and controlling the flow of work for a 2-year machine trades training program. The first part of the guide provides information on program management (program description, safety concerns, academic issues, implementation…

Integrated Electronic Warfare System Advanced Development Model (ADM); Appendix 1 - Functional Requirement Specification.

DTIC Science & Technology

1977-10-01

APPROVED DATE FUNCTION APPROVED jDATE WRITER J . K-olanek 2/6/76 REVISIONS CHK DESCRIPTION REV CHK DESCRIPTION IREV REVISION jJ ~ ~ ~~~ _ II SHEET NO...DOCUMENT (CDBDD) 45 5.5 COMPUTER PROGRAM PACKAGE (CPP)- j 45 5.6 COMPUTER PROGRAM OPERATOR’S MANUAL (CPOM) 45 5.7 COMPUTER PROGRAM TEST PLAN (CPTPL) 45...I LIST OF FIGURES Number Page 1 JEWS Simplified Block Diagram 4 2 System Controller Architecture 5 SIZE CODE IDENT NO DRAWING NO. A 49956 SCALE REV J

75 FR 3966 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-25

...: Terrorism Risk Insurance Program Rebuttal of Controlling Influence Submission. Description: 31 CFR 50.8... regulatory presumption of ``controlling influence'' over another insurer under the Terrorism Risk Insurance...

The planning and control of NASA programs and resources

NASA Technical Reports Server (NTRS)

1983-01-01

The major management systems used to plan and control NASA programs and resources are described as well as their integration to form the agency's general management approach in carrying out its mission. Documents containing more detailed descriptions of the processes and techniques involved in the agency's major management systems are listed.

Machine Trades Lab Management Guide.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Instructional Materials Lab.

This manual was developed to guide machine trades instructors and vocational supervisors in sequencing laboratory instruction and controlling the flow of work for a 2-year machine trades training program. The first part of the guide provides information on program management (program description, safety concerns, academic issues, implementation…

A real-time digital computer program for the simulation of automatic spacecraft reentries

NASA Technical Reports Server (NTRS)

Kaylor, J. T.; Powell, L. F.; Powell, R. W.

1977-01-01

The automatic reentry flight dynamics simulator, a nonlinear, six-degree-of-freedom simulation, digital computer program, has been developed. The program includes a rotating, oblate earth model for accurate navigation calculations and contains adjustable gains on the aerodynamic stability and control parameters. This program uses a real-time simulation system and is designed to examine entries of vehicles which have constant mass properties whose attitudes are controlled by both aerodynamic surfaces and reaction control thrusters, and which have automatic guidance and control systems. The program has been used to study the space shuttle orbiter entry. This report includes descriptions of the equations of motion used, the control and guidance schemes that were implemented, the program flow and operation, and the hardware involved.

FASTER 3: A generalized-geometry Monte Carlo computer program for the transport of neutrons and gamma rays. Volume 2: Users manual

NASA Technical Reports Server (NTRS)

Jordan, T. M.

1970-01-01

A description of the FASTER-III program for Monte Carlo Carlo calculation of photon and neutron transport in complex geometries is presented. Major revisions include the capability of calculating minimum weight shield configurations for primary and secondary radiation and optimal importance sampling parameters. The program description includes a users manual describing the preparation of input data cards, the printout from a sample problem including the data card images, definitions of Fortran variables, the program logic, and the control cards required to run on the IBM 7094, IBM 360, UNIVAC 1108 and CDC 6600 computers.

INTEGRATED PROTECTIVE FABRIC SYSTEM (IPFS) PHASE III PROGRAM: AEROSOL PROTECTION REPORT

DTIC Science & Technology

2017-08-16

one layer control. It was observed that aerosol swatch measurements showed no correlation to aerosol system test performance for the materials and...the BRHA model employed. It was observed that aerosol swatch measurements showed no correlation to aerosol system test performance for the...Testing” (McVeety et al., 2015). This report includes a description of the materials and material controls, a description of the IPFS configurations

Command/response protocols and concurrent software

NASA Technical Reports Server (NTRS)

Bynum, W. L.

1987-01-01

A version of the program to control the parallel jaw gripper is documented. The parallel jaw end-effector hardware and the Intel 8031 processor that is used to control the end-effector are briefly described. A general overview of the controller program is given and a complete description of the program's structure and design are contained. There are three appendices: a memory map of the on-chip RAM, a cross-reference listing of the self-scheduling routines, and a summary of the top-level and monitor commands.

KALI - An environment for the programming and control of cooperative manipulators

NASA Technical Reports Server (NTRS)

Hayward, Vincent; Hayati, Samad

1988-01-01

A design description is given of a controller for cooperative robots. The background and motivation for multiple arm control are discussed. A set of programming primitives which permit a programmer to specify cooperative tasks are described. Motion primitives specify asynchronous motions, master/slave motions, and cooperative motions. In the context of cooperative robots, trajectory generation issues are discussed and the authors' implementation briefly described. The relations between programming and control in the case of multiple robots are examined. The allocation of various tasks among a multiprocessor computer is described.

77 FR 30305 - Notice of Proposed Information Collection; Comment Request Housing Counseling Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... Information Collection; Comment Request Housing Counseling Program AGENCY: Office of the Assistant Secretary... information: Title of Proposal: Housing Counseling Program. OMB Control Number, if applicable: 2502-0261. Description of the need for the information and proposed use: Nonprofit Housing Counseling organizations...

77 FR 71016 - Renewal of Agency Information Collection for Tribal Self-Governance Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... authorized by OMB Control Number 1076-0143, which expires November 30, 2012. DATE: Interested persons are... Number: 1076-0143. Title: Tribal Self-Governance program, 25 CFR 1000. Brief Description of Collection...

HYTESS 2: A Hypothetical Turbofan Engine Simplified Simulation with multivariable control and sensor analytical redundancy

NASA Technical Reports Server (NTRS)

Merrill, W. C.

1986-01-01

A hypothetical turbofan engine simplified simulation with a multivariable control and sensor failure detection, isolation, and accommodation logic (HYTESS II) is presented. The digital program, written in FORTRAN, is self-contained, efficient, realistic and easily used. Simulated engine dynamics were developed from linearized operating point models. However, essential nonlinear effects are retained. The simulation is representative of the hypothetical, low bypass ratio turbofan engine with an advanced control and failure detection logic. Included is a description of the engine dynamics, the control algorithm, and the sensor failure detection logic. Details of the simulation including block diagrams, variable descriptions, common block definitions, subroutine descriptions, and input requirements are given. Example simulation results are also presented.

Quality control education in the community college

NASA Technical Reports Server (NTRS)

Greene, J. Griffen; Wilson, Steve

1966-01-01

This paper describes the Quality Control Program at Daytona Beach Junior College, including course descriptions. The program in quality control required communication between the college and the American Society for Quality Control (ASQC). The college has machinery established for certification of the learning process, and the society has the source of teachers who are competent in the technical field and who are the employers of the educational products. The associate degree for quality control does not have a fixed program, which can serve all needs, any more than all engineering degrees have identical programs. The main ideas which would be common to all quality control programs are the concept of economic control of a repetitive process and the concept of developing individual potentialities into individuals who are needed and productive.

42 CFR 456.712 - Annual report.

Code of Federal Regulations, 2013 CFR

2013-10-01

... program. (2) A description of how pharmacies performing prospective DUR without computers are expected to...) A description of the steps taken by the State Agency to monitor compliance by pharmacies with the... entities such as the Medicaid Fraud Control Unit and State Board of Pharmacy. The annual report also must...

42 CFR 456.712 - Annual report.

Code of Federal Regulations, 2014 CFR

2014-10-01

... program. (2) A description of how pharmacies performing prospective DUR without computers are expected to...) A description of the steps taken by the State Agency to monitor compliance by pharmacies with the... entities such as the Medicaid Fraud Control Unit and State Board of Pharmacy. The annual report also must...

42 CFR 456.712 - Annual report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... program. (2) A description of how pharmacies performing prospective DUR without computers are expected to...) A description of the steps taken by the State Agency to monitor compliance by pharmacies with the... entities such as the Medicaid Fraud Control Unit and State Board of Pharmacy. The annual report also must...

42 CFR 456.712 - Annual report.

Code of Federal Regulations, 2011 CFR

2011-10-01

... program. (2) A description of how pharmacies performing prospective DUR without computers are expected to...) A description of the steps taken by the State Agency to monitor compliance by pharmacies with the... entities such as the Medicaid Fraud Control Unit and State Board of Pharmacy. The annual report also must...

42 CFR 456.712 - Annual report.

Code of Federal Regulations, 2012 CFR

2012-10-01

... program. (2) A description of how pharmacies performing prospective DUR without computers are expected to...) A description of the steps taken by the State Agency to monitor compliance by pharmacies with the... entities such as the Medicaid Fraud Control Unit and State Board of Pharmacy. The annual report also must...

DYGABCD: A program for calculating linear A, B, C, and D matrices from a nonlinear dynamic engine simulation

NASA Technical Reports Server (NTRS)

Geyser, L. C.

1978-01-01

A digital computer program, DYGABCD, was developed that generates linearized, dynamic models of simulated turbofan and turbojet engines. DYGABCD is based on an earlier computer program, DYNGEN, that is capable of calculating simulated nonlinear steady-state and transient performance of one- and two-spool turbojet engines or two- and three-spool turbofan engines. Most control design techniques require linear system descriptions. For multiple-input/multiple-output systems such as turbine engines, state space matrix descriptions of the system are often desirable. DYGABCD computes the state space matrices commonly referred to as the A, B, C, and D matrices required for a linear system description. The report discusses the analytical approach and provides a users manual, FORTRAN listings, and a sample case.

76 FR 12983 - Notice of Proposed Information Collection: Comment Request; Tenant Resource Network Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5484-N-06] Notice of Proposed Information Collection: Comment Request; Tenant Resource Network Program AGENCY: Office of the Assistant...: Tenant Resource Network Program. OMB Control Number, if applicable: 2502-new-65pTRNP. Description of the...

Program Description | Cancer Prevention Fellowship Program

Cancer.gov

Preventing cancer is one of the most important scientific and public health aims for the 21st Century. To achieve that goal, the Nation needs leaders: scientists and health professionals trained in the principles and practice of cancer prevention and control.

Apollo experience report: Mission planning for Apollo entry

NASA Technical Reports Server (NTRS)

Graves, C. A.; Harpold, J. C.

1972-01-01

The problems encountered and the experience gained in the entry mission plans, flight software, trajectory-monitoring procedures, and backup trajectory-control techniques of the Apollo Program should provide a foundation upon which future spacecraft programs can be developed. Descriptions of these entry activities are presented. Also, to provide additional background information needed for discussion of the Apollo entry experience, descriptions of the entry targeting for the Apollo 11 mission and the postflight analysis of the Apollo 10 mission are presented.

Comparison of mosquito control programs in seven urban sites in Africa, the Middle East, and the Americas.

PubMed

Impoinvil, Daniel E; Ahmad, Sajjad; Troyo, Adriana; Keating, Joseph; Githeko, Andrew K; Mbogo, Charles M; Kibe, Lydiah; Githure, John I; Gad, Adel M; Hassan, Ali N; Orshan, Laor; Warburg, Alon; Calderón-Arguedas, Olger; Sánchez-Loría, Victoria M; Velit-Suarez, Rosanna; Chadee, Dave D; Novak, Robert J; Beier, John C

2007-10-01

Mosquito control programs at seven urban sites in Kenya, Egypt, Israel, Costa Rica, and Trinidad are described and compared. Site-specific urban and disease characteristics, organizational diagrams, and strengths, weaknesses, obstacles and threats (SWOT) analysis tools are used to provide a descriptive assessment of each mosquito control program, and provide a comparison of the factors affecting mosquito abatement. The information for SWOT analysis is collected from surveys, focus-group discussions, and personal communication. SWOT analysis identified various issues affecting the efficiency and sustainability of mosquito control operations. The main outcome of our work was the description and comparison of mosquito control operations within the context of each study site's biological, social, political, management, and economic conditions. The issues identified in this study ranged from lack of inter-sector collaboration to operational issues of mosquito control efforts. A lack of sustainable funding for mosquito control was a common problem for most sites. Many unique problems were also identified, which included lack of mosquito surveillance, lack of law enforcement, and negative consequences of human behavior. Identifying common virtues and shortcomings of mosquito control operations is useful in identifying "best practices" for mosquito control operations, thus leading to better control of mosquito biting and mosquito-borne disease transmission.

Comparison of mosquito control programs in seven urban sites in Africa, the Middle East, and the Americas

PubMed Central

Impoinvil, Daniel E.; Ahmad, Sajjad; Troyo, Adriana; Keating, Joseph; Githeko, Andrew K.; Mbogo, Charles M; Kibe, Lydiah; Githure, John I.; Gad, Adel M.; Hassan, Ali N.; Orshan, Laor; Warburg, Alon; Calderón-Arguedas, Olger; Sánchez-Loría, Victoria M.; Velit-Suarez, Rosanna; Chadee, Dave D.; Novak, Robert J.; Beier, John C.

2007-01-01

Mosquito control programs at seven urban sites in Kenya, Egypt, Israel, Costa Rica, and Trinidad are described and compared. Site-specific urban and disease characteristics, organizational diagrams, and strengths, weaknesses, obstacles and threats (SWOT) analysis tools are used to provide a descriptive assessment of each mosquito control program, and provide a comparison of the factors affecting mosquito abatement. The information for SWOT analysis is collected from surveys, focus group discussions, and personal communication. SWOT analysis identified various issues affecting the efficiency and sustainability of mosquito control operations. The main outcome of our work was the description and comparison of mosquito control operations within the context of each study site’s biological, social, political, management, and economic conditions. The issues identified in this study ranged from lack of inter-sector collaboration to operational issues of mosquito control efforts. A lack of sustainable funding for mosquito control was a common problem for most sites. Many unique problems were also identified, which included lack of mosquito surveillance, lack of law enforcement, and negative consequences of human behavior. Identifying common virtues and shortcomings of mosquito control operations is useful in identifying “best practices” for mosquito control operations, thus leading to better control of mosquito biting and mosquito-borne disease transmission. PMID:17316882

An adaptive maneuvering logic computer program for the simulation of one-on-one air-to-air combat. Volume 1: General description

NASA Technical Reports Server (NTRS)

Burgin, G. H.; Fogel, L. J.; Phelps, J. P.

1975-01-01

A technique for computer simulation of air combat is described. Volume 1 decribes the computer program and its development in general terms. Two versions of the program exist. Both incorporate a logic for selecting and executing air combat maneuvers with performance models of specific fighter aircraft. In the batch processing version the flight paths of two aircraft engaged in interactive aerial combat and controlled by the same logic are computed. The realtime version permits human pilots to fly air-to-air combat against the adaptive maneuvering logic (AML) in Langley Differential Maneuvering Simulator (DMS). Volume 2 consists of a detailed description of the computer programs.

Effects of a Wilderness Program on Self-Esteem and Locus of Control Orientations of Young Adults. Summary of Thesis.

ERIC Educational Resources Information Center

Bertolami, Cheryl

Quantitative data and descriptive data (written self-evaluation and journal entries) were collected from young adults participating in a standard 26-day Outward Bound course during a quasi-experimental control group design experiment to determine the degree to which participation in a high risk wilderness program leads to self-discovery,…

Integration of a mechanical forebody vortex control system into the F-15

NASA Technical Reports Server (NTRS)

Boalbey, Richard E.; Citurs, Kevin D.; Ely, Wayne L.; Harbaugh, Stephen P.; Hollingsworth, William B.; Phillips, Ronald L.

1994-01-01

The goal of the F-15 Forebody Vortex Control (FVC) program is to develop a production FVC system for the F-15. The system may consist of either a mechanically actuated device such as the strakes developed for the HARV program, or a pneumatic device such as the port blowing system being tested on the X-29. Both types of systems are being evaluated under this program. Background information on the F-15 and a description and overview of forebody vortex controls (FVC) will be presented.

Strategic Control Algorithm Development : Volume 4A. Computer Program Report.

DOT National Transportation Integrated Search

1974-08-01

A description of the strategic algorithm evaluation model is presented, both at the user and programmer levels. The model representation of an airport configuration, environmental considerations, the strategic control algorithm logic, and the airplan...

Strategic Control Algorithm Development : Volume 4B. Computer Program Report (Concluded)

DOT National Transportation Integrated Search

1974-08-01

A description of the strategic algorithm evaluation model is presented, both at the user and programmer levels. The model representation of an airport configuration, environmental considerations, the strategic control algorithm logic, and the airplan...

75 FR 75693 - Rehabilitation Mortgage Insurance Underwriting Program Section 203(k); Notice of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

... Insurance Underwriting Program Section 203(k); Notice of Proposed Information Collection: Comment Request... Underwriting Program Section 203(k). OMB Control Number, if applicable: 2502-0527. Description of the need for... borrower defaults on single-family mortgages. Specifically, under Section 203(k) of the Act, the Secretary...

Synthesis of Feedback Controller for Chaotic Systems by Means of Evolutionary Techniques

NASA Astrophysics Data System (ADS)

Senkerik, Roman; Oplatkova, Zuzana; Zelinka, Ivan; Davendra, Donald; Jasek, Roman

2011-06-01

This research deals with a synthesis of control law for three selected discrete chaotic systems by means of analytic programming. The novality of the approach is that a tool for symbolic regression—analytic programming—is used for such kind of difficult problem. The paper consists of the descriptions of analytic programming as well as chaotic systems and used cost function. For experimentation, Self-Organizing Migrating Algorithm (SOMA) with analytic programming was used.

An Infrared Spectral Radiance Code for the Auroral Thermosphere (AARC)

DTIC Science & Technology

1987-11-24

Program Description and Usage 136 3,1 Main Modules 136 3.2 Input, Output, and Program Communication 138 3.2.1 Input of User-Defined Program Control ...a test date set with which to compare the model predic- tions. Secondly, a number of theoretical papers are available describing some of the basic...necessary since secondary electrons aro a very important source of molecular nitrogen in vibrationally excited states [N2(v)), and the N2 (v) controls

A description of the verbal behavior of students during two reading instruction methods

PubMed Central

Daly, Patricia M.

1987-01-01

The responses of students during two reading methods, the language experience approach and two Mastery Learning programs, were analyzed using verbal operants. A description of student responding was generated for these methods. The purpose of the study was to answer the questions: What are the major controlling variables determining student reading behavior during the language experience approach and two Mastery Learning programs, and how do these controlling variables change across story reading sessions and across stories in the first method? Student responses by verbal operant were compared for both reading methods. Findings indicated higher frequencies of textual operants occurred in responses during the Mastery Learning programs. A greater reliance on intraverbal control was evident in responses during the language experience approach. It is suggested that students who can generate strong intraverbal responses and who may have visual discrimination problems during early reading instruction may benefit from use of the language experience approach at this stage. ImagesFigure 2Figure 3 PMID:22477535

IPCS implications for future supersonic transport aircraft

NASA Technical Reports Server (NTRS)

Billig, L. O.; Kniat, J.; Schmidt, R. D.

1976-01-01

The Integrated Propulsion Control System (IPCS) demonstrates control of an entire supersonic propulsion module - inlet, engine afterburner, and nozzle - with an HDC 601 digital computer. The program encompasses the design, build, qualification, and flight testing of control modes, software, and hardware. The flight test vehicle is an F-111E airplane. The L.H. inlet and engine will be operated under control of a digital computer mounted in the weapons bay. A general description and the current status of the IPCS program are given.

76 FR 52677 - Notice of Proposed Information Collection: Comment Request; Application for Energy Innovation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... Information Collection: Comment Request; Application for Energy Innovation Fund--Multifamily Pilot Program... Deputy Assistant Secretary for Affordable Housing Preservation, Multifamily Housing Division, Department... Fund-- Multifamily Pilot Program. OMB Control Number, if applicable: 2502-0599. Description of the need...

Caesy: A software tool for computer-aided engineering

NASA Technical Reports Server (NTRS)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

A Digital Program for Calculating the Interaction Between Flexible Structures, Unsteady Aerodynamics and Active Controls

NASA Technical Reports Server (NTRS)

Peele, E. L.; Adams, W. M., Jr.

1979-01-01

A computer program, ISAC, is described which calculates the stability and response of a flexible airplane equipped with active controls. The equations of motion relative to a fixed inertial coordinate system are formulated in terms of the airplane's rigid body motion and its unrestrained normal vibration modes. Unsteady aerodynamic forces are derived from a doublet lattice lifting surface theory. The theoretical basis for the program is briefly explained together with a description of input data and output results.

40 CFR 86.1844-01 - Information requirements: Application for certification and submittal of information upon request.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (10) For vehicles with non-integrated refueling emission control systems, a description of the... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF... Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks, and Complete Otto...

40 CFR 86.1844-01 - Information requirements: Application for certification and submittal of information upon request.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (10) For vehicles with non-integrated refueling emission control systems, a description of the... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF... Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks, and Complete Otto...

40 CFR 86.1844-01 - Information requirements: Application for certification and submittal of information upon request.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (10) For vehicles with non-integrated refueling emission control systems, a description of the... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF... Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks, and Complete Otto...

40 CFR 86.1844-01 - Information requirements: Application for certification and submittal of information upon request.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (10) For vehicles with non-integrated refueling emission control systems, a description of the... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF... Control of Air Pollution From New and In-Use Light-Duty Vehicles, Light-Duty Trucks, and Complete Otto...

Professional Equipment for a University Environmental Health Program

ERIC Educational Resources Information Center

Iglar, Albert F.; Morgan, Monroe T.

1972-01-01

A rather thorough description of the professional equipment utilized in the Environmental Health Program at East Tennessee State University. Describes equipment and apparatus employed in the General Environmental, Occupational Health and Safety, and the Air and Water Pollution Control Areas. Table of recommended basic professional equipment…

Building Program Models Incrementally from Informal Descriptions.

DTIC Science & Technology

1979-10-01

specified at each step. Since the user controls the interaction, the user may determine the order in which information flows into PMB. Information is received...until only ten years ago the term aautomatic programming" referred to the development of the assemblers, macro expanders, and compilers for these

NASA Information Sciences and Human Factors Program

NASA Technical Reports Server (NTRS)

Holcomb, Lee B.; Mciver, Duncan E.; Dibattista, John D.; Larsen, Ronald L.; Montemerlo, Melvin D.; Wallgren, Ken; Sokoloski, Marty; Wasicko, Dick

1985-01-01

This report contains FY 1984/85 descriptions and accomplishments in six sections: Computer Science and Automation, Controls and Guidance, Data Systems, Human Factors, Sensor Technology, and Communications.

AOIPS 3 user's guide. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

1990-01-01

The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

Debris control design achievements of the booster separation motors

NASA Technical Reports Server (NTRS)

Smith, G. W.; Chase, C. A.

1985-01-01

The stringent debris control requirements imposed on the design of the Space Shuttle booster separation motor are described along with the verification program implemented to ensure compliance with debris control objectives. The principal areas emphasized in the design and development of the Booster Separation Motor (BSM) relative to debris control were the propellant formulation and nozzle closures which protect the motors from aerodynamic heating and moisture. A description of the motor design requirements, the propellant formulation and verification program, and the nozzle closures design and verification are presented.

75 FR 52545 - Notice of Proposed Information Collection: Comment Request, State Community Development Block...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR 5377-N-02] Notice of Proposed Information Collection: Comment Request, State Community Development Block (CDBG) Program AGENCY: Office of... Block Grant (CDBG) Program. OMB Control Number, if applicable: 2506-0085. Description of the need for...

40 CFR 745.324 - Authorization of State or Tribal programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... administer and enforce a lead-based paint program. (4) After submitting an application, the Agency will..., the State or Tribal application must include a description of the State or Tribal lead-based paint...

40 CFR 745.324 - Authorization of State or Tribal programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... administer and enforce a lead-based paint program. (4) After submitting an application, the Agency will..., the State or Tribal application must include a description of the State or Tribal lead-based paint...

40 CFR 745.324 - Authorization of State or Tribal programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... administer and enforce a lead-based paint program. (4) After submitting an application, the Agency will..., the State or Tribal application must include a description of the State or Tribal lead-based paint...

40 CFR 745.324 - Authorization of State or Tribal programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... administer and enforce a lead-based paint program. (4) After submitting an application, the Agency will..., the State or Tribal application must include a description of the State or Tribal lead-based paint...

40 CFR 745.324 - Authorization of State or Tribal programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES... administer and enforce a lead-based paint program. (4) After submitting an application, the Agency will..., the State or Tribal application must include a description of the State or Tribal lead-based paint...

78 FR 30385 - Approval of Noise Compatibility Program for Tweed-New Haven Regional Airport

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... use of flight procedures can be implemented within the period covered by the program without... maps, descriptions, and other documentation produced during the noise compatibility planning study... 180 days (other than the use of new flight procedures for noise control). Failure to approve or...

NASA Information Sciences and Human Factors Program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Jenkins, James; Smith, Paul; Dibattista, John; Depaula, Ramon; Hunter, Paul

1990-01-01

Fiscal year 1989 descriptions of technical accomplishments in seven sections are presented: automation and robotics; communications; computer sciences; controls and guidance; data systems; human factors; and sensor technology.

NASA information sciences and human factors program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Jenkins, James; Smith, Paul; Dibattista, John; Depaula, Ramon; Hunter, Paul; Lavery, David

1991-01-01

The FY-90 descriptions of technical accomplishments are contained in seven sections: Automation and Robotics, Communications, Computer Sciences, Controls and Guidance, Data Systems, Human Factors, and Sensor Technology.

Treatment of Speech Anxiety by Cue-Controlled Relaxation and Desensitization with Professional and Paraprofessional Counselors

ERIC Educational Resources Information Center

Russell, Richard K.; Wise, Fred

1976-01-01

This investigation compared the relative effectiveness of group-administered cue-controlled relaxation and group systematic desensitization in the treatment of speech anxiety. Also examined was the role of professional versus paraprofessional counselors in implementing the treatment program. A description of the cue-controlled relaxation technique…

NASA Information Sciences and Human Factors Program

NASA Technical Reports Server (NTRS)

Holcomb, Lee (Editor); Hood, Ray (Editor); Montemerlo, Melvin (Editor); Sokoloski, Martin M. (Editor); Jenkins, James P. (Editor); Smith, Paul H. (Editor); Dibattista, John D. (Editor)

1988-01-01

The FY 1987 descriptions of technical accomplishments are contained for seven areas: automation and robotics, communications systems, computer sciences, controls and guidance, data systems, human factors, and sensor technology.

NASA information sciences and human factors program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Sokoloski, Martin; Jenkins, James; Smith, Paul; Dibattista, John

1989-01-01

The FY 1988 descriptions of technical accomplishments is presented in seven sections: Automation and Robotics, Communications Systems, Computer Sciences, Controls and Guidance, Data Systems, Human Factors, and Sensor Technology.

Design description of a microprocessor based Engine Monitoring and Control unit (EMAC) for small turboshaft

NASA Technical Reports Server (NTRS)

Baez, A. N.

1985-01-01

Research programs have demonstrated that digital electronic controls are more suitable for advanced aircraft/rotorcraft turbine engine systems than hydromechanical controls. Commercially available microprocessors are believed to have the speed and computational capability required for implementing advanced digital control algorithms. Thus, it is desirable to demonstrate that off-the-shelf microprocessors are indeed capable of performing real time control of advanced gas turbine engines. The engine monitoring and control (EMAC) unit was designed and fabricated specifically to meet the requirements of an advanced gas turbine engine control system. The EMAC unit is fully operational in the Army/NASA small turboshaft engine digital research program.

Gaps in the existing public health informatics training programs: a challenge to the development of a skilled global workforce.

PubMed

Joshi, Ashish; Perin, Douglas Marcel Puricelli

2012-01-01

The objective of this study was to explore public health informatics (PHI) training programs that currently exist to meet the growing demand for a trained global workforce. We used several search engines, scientific databases, and the websites of informatics organizations; sources included PubMed, Google, the American Medical Informatics Organization, and the International Medical Informatics Organization. The search was conducted from May to July 2011 and from January to February 2012 using key words such as informatics, public health informatics, or biomedical informatics along with academic programs, training, certificate, graduate programs, or postgraduate programs. Course titles and catalog descriptions were gathered from the program or institution websites. Variables included PHI program categories, location and mode of delivery, program credits, and costs. Each course was then categorized based on its title and description as available on the Internet. Finally, we matched course titles and descriptions with the competencies for PHIs determined by Centers for Disease Control and Prevention (CDC). Descriptive analysis was performed to report means and frequency distributions for continuous and categorical variables. Stratified analysis was performed to explore average credits and cost per credit among both the public and private institutions. Fifteen PHI programs were identified across 13 different institutions, the majority of which were US-based. The average number of credits and the associated costs required to obtain PHI training were much higher in private as compared to public institutions. The study results suggest that a need for online contextual and cost-effective PHI training programs exists to address the growing needs of professionals worldwide who are using technology to improve public health in their respective countries.

Plotting program for aerodynamic lifting surface theory. [user manual for FORTRAN computer program

NASA Technical Reports Server (NTRS)

Medan, R. T.; Ray, K. S.

1973-01-01

A description of and users manual for a USA FORTRAN IV computer program which plots the planform and control points of a wing are presented. The program also plots some of the configuration data such as the aspect ratio. The planform data is stored on a disc file which is created by a geometry program. This program, the geometry program, and several other programs are used together in the analysis of lifting, thin wings in steady, subsonic flow according to a kernel function lifting surface theory.

42 CFR 403.300 - Basis and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS SPECIAL PROGRAMS AND PROJECTS Recognition of State Reimbursement Control Systems § 403.300 Basis... control system must meet in order to be approved by CMS; (2) A description of CMS's review and evaluation...

CDC 2004 Programs in Brief.

ERIC Educational Resources Information Center

US Department of Health and Human Services, 2004

2004-01-01

Grouped in 16 categories, the 2004 Programs in Brief illustrates the scope of Centers for Disease Control and Prevention (CDC) and the Agency for Toxic Substances and Disease Registry (ATSDR) activities, as well as their shared goals of safer, healthier people here and around the world. Each description includes a statement of the public health…

Feasibility model of a high reliability five-year tape transport. Volume 3: Appendices. [detailed drawing and analytical tools used in analyses

NASA Technical Reports Server (NTRS)

Meyers, A. P.; Davidson, W. A.; Gortowski, R. C.

1973-01-01

Detailed drawings of the five year tape transport are presented. Analytical tools used in the various analyses are described. These analyses include: tape guidance, tape stress over crowned rollers, tape pack stress program, response (computer) program, and control system electronics description.

40 CFR 49.160 - Registration program for minor sources in Indian country.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Implementation Plan Provisions Federal Minor New Source Review Program in Indian Country § 49.160 Registration...) Identification and description of any existing air pollution control equipment and compliance monitoring devices.... (ii) If your true minor source is not an oil and natural gas source and you commence construction...

77 FR 70151 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or Quantities of.... The sensitivity is primarily in the software programs that instruct the system how to operate in the... Only Memory (ROM) maps, which do not provide the software program itself. The overall hardware is...

A description of the thruster attitude control simulation and its application to the HEAO-C study

NASA Technical Reports Server (NTRS)

Brandon, L. B.

1971-01-01

During the design and evaluation of a reaction control system (RCS), it is desirable to have a digital computer program simulating vehicle dynamics, disturbance torques, control torques, and RCS logic. The thruster attitude control simulation (TACS) is just such a computer program. The TACS is a relatively sophisticated digital computer program that includes all the major parameters involved in the attitude control of a vehicle using an RCS for control. It includes the effects of gravity gradient torques and HEAO-C aerodynamic torques so that realistic runs can be made in the areas of fuel consumption and engine actuation rates. Also, the program is general enough that any engine configuration and logic scheme can be implemented in a reasonable amount of time. The results of the application of the TACS in the HEAO-C study are included.

CIRCAL-2 - General-purpose on-line circuit design.

NASA Technical Reports Server (NTRS)

Dertouzos, M. L.; Jessel, G. P.; Stinger, J. R.

1972-01-01

CIRCAL-2 is a second-generation general-purpose on-line circuit-design program with the following main features: (1) multiple-analysis capability; (2) uniform and general data structures for handling text editing, network representations, and output results, regardless of analysis; (3) special techniques and structures for minimizing and controlling user-program interaction; (4) use of functionals for the description of hysteresis and heat effects; and (5) ability to define optimization procedures that 'replace' the user. The paper discusses the organization of CIRCAL-2, the aforementioned main features, and their consequences, such as a set of network elements and models general enough for most analyses and a set of functions tailored to circuit-design requirements. The presentation is descriptive, concentrating on conceptual rather than on program implementation details.

40 CFR 122.26 - Storm water discharges (applicable to State NPDES programs, see § 123.25).

Code of Federal Regulations, 2013 CFR

2013-07-01

... controls are not needed based on a TMDL or, for non-impaired waters that do not require a TMDL, an... applied; the location and a description of existing structural and non-structural control measures to... controls would be those suitable to the site conditions and consistent with generally accepted engineering...

Apollo experience report. Guidance and control systems: Command and service module stabilization and control system

NASA Technical Reports Server (NTRS)

Littleton, O. P.

1974-01-01

The concepts, design, development, testing, and flight results of the command and service module stabilization and control system are discussed. The period of time covered was from November 1961 to December 1972. Also included are a functional description of the system, a discussion of the major problems, and recommendations for future programs.

On-orbit flight control algorithm description

NASA Technical Reports Server (NTRS)

1975-01-01

Algorithms are presented for rotational and translational control of the space shuttle orbiter in the orbital mission phases, which are external tank separation, orbit insertion, on-orbit and de-orbit. The program provides a versatile control system structure while maintaining uniform communications with other programs, sensors, and control effectors by using an executive routine/functional subroutine format. Software functional requirements are described using block diagrams where feasible, and input--output tables, and the software implementation of each function is presented in equations and structured flow charts. Included are a glossary of all symbols used to define the requirements, and an appendix of supportive material.

Multi-community command and control systems in law enforcement: An introductory planning guide

NASA Technical Reports Server (NTRS)

Sohn, R. L.; Garcia, E. A.; Kennedy, R. D.

1976-01-01

A set of planning guidelines for multi-community command and control systems in law enforcement is presented. Essential characteristics and applications of these systems are outlined. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Program management techniques and joint powers agreements for multicommunity programs are discussed in detail. A description of a typical multi-community computer-aided dispatch system is appended.

77 FR 19015 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-29

... Disease Control and Prevention (CDC). Background and Brief Description Colorectal Cancer (CRC) is the second leading cause of cancer- related deaths in the United States, following lung cancer. Based on... days of this notice. Proposed Project Colorectal Cancer Control Program Indirect/Non-Medical Cost Study...

The Role of Perceived Injunctive Alcohol Norms in Adolescent Drinking Behavior

PubMed Central

Pedersen, Eric R.; Osilla, Karen Chan; Miles, Jeremy N.V.; Tucker, Joan S.; Ewing, Brett A.; Shih, Regina A.; D’Amico, Elizabeth J.

2016-01-01

Peers have a major influence on youth during adolescence, and perceptions about peer alcohol use (perceived norms) are often associated with personal drinking behavior among youth. Most of the research on perceived norms among adolescents focuses on perceived descriptive norms only, or perceptions about peers’ behavior, and correcting these perceptions are a major focus of many prevention programs with adolescents. In contrast, perceived injunctive norms, which are personal perceptions about peers’ attitudes regarding the acceptability of behaviors, have been minimally examined in the adolescent drinking literature. Yet correcting perceptions about these perceived peer attitudes may be an important component to include in prevention programs with youth. Using a sample of 2,493 high school-aged youth (mean age = 17.3), we assessed drinking behavior (past year use; past month frequency, quantity, and peak drinks), drinking consequences, and perceived descriptive and injunctive norms to examine the relationships of perceived injunctive and descriptive norms on adolescent drinking behavior. Findings indicated that although perceived descriptive norms were associated with some drinking outcomes (past year use; past month frequency; past month quantity; peak drinks), perceived injunctive norms were associated with all drinking outcomes, including outcomes of consequences, even after controlling for perceived descriptive norms. Findings suggest that consideration of perceived injunctive norms may be important in models of adolescent drinking. Prevention programs that do not include injunctive norms feedback may miss an important opportunity to enhance effectiveness of such prevention programs targeting adolescent alcohol use. PMID:27978424

Radio astronomy Explorer-B in-flight mission control system development effort

NASA Technical Reports Server (NTRS)

Lutsky, D. A.; Bjorkman, W. S.; Uphoff, C.

1973-01-01

A description is given of the development for the Mission Analysis Evaluation and Space Trajectory Operations (MAESTRO) program to be used for the in-flight decision making process during the translunar and lunar orbit adjustment phases of the flight of the Radio Astronomy Explorer-B. THe program serves two functions: performance and evaluation of preflight mission analysis, and in-flight support for the midcourse and lunar insertion command decisions that must be made by the flight director. The topics discussed include: analysis of program and midcourse guidance capabilities; methods for on-line control; printed displays of the MAESTRO program; and in-flight operational logistics and testing.

Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

NASA Technical Reports Server (NTRS)

Isenberg, J. M.; Southall, J. W.

1979-01-01

The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

Arc program documentation

NASA Technical Reports Server (NTRS)

Mcmillan, J. D.

1976-01-01

A description of the input and output files and the data control cards for the altimeter residual computation (ARC) computer program is given. The program acts as the final altimeter preprocessor before the data is reformatted for external users. It calculates all parameters necessary for the computation of the altimeter observation residuals and the sea surface height. Mathematical models used for calculating tropospheric refraction, geoid height, tide height, ephemeris, and orbit geometry are described.

Reducing cyberbullying: A theory of reasoned action-based video prevention program for college students.

PubMed

Doane, Ashley N; Kelley, Michelle L; Pearson, Matthew R

2016-01-01

Few studies have evaluated the effectiveness of cyberbullying prevention/intervention programs. The goals of the present study were to develop a Theory of Reasoned Action (TRA)-based video program to increase cyberbullying knowledge (1) and empathy toward cyberbullying victims (2), reduce favorable attitudes toward cyberbullying (3), decrease positive injunctive (4) and descriptive norms about cyberbullying (5), and reduce cyberbullying intentions (6) and cyberbullying behavior (7). One hundred sixty-seven college students were randomly assigned to an online video cyberbullying prevention program or an assessment-only control group. Immediately following the program, attitudes and injunctive norms for all four types of cyberbullying behavior (i.e., unwanted contact, malice, deception, and public humiliation), descriptive norms for malice and public humiliation, empathy toward victims of malice and deception, and cyberbullying knowledge significantly improved in the experimental group. At one-month follow-up, malice and public humiliation behavior, favorable attitudes toward unwanted contact, deception, and public humiliation, and injunctive norms for public humiliation were significantly lower in the experimental than the control group. Cyberbullying knowledge was significantly higher in the experimental than the control group. These findings demonstrate a brief cyberbullying video is capable of improving, at one-month follow-up, cyberbullying knowledge, cyberbullying perpetration behavior, and TRA constructs known to predict cyberbullying perpetration. Considering the low cost and ease with which a video-based prevention/intervention program can be delivered, this type of approach should be considered to reduce cyberbullying. © 2015 Wiley Periodicals, Inc.

Small Interactive Image Processing System (SMIPS) system description

NASA Technical Reports Server (NTRS)

Moik, J. G.

1973-01-01

The Small Interactive Image Processing System (SMIPS) operates under control of the IBM-OS/MVT operating system and uses an IBM-2250 model 1 display unit as interactive graphic device. The input language in the form of character strings or attentions from keys and light pen is interpreted and causes processing of built-in image processing functions as well as execution of a variable number of application programs kept on a private disk file. A description of design considerations is given and characteristics, structure and logic flow of SMIPS are summarized. Data management and graphic programming techniques used for the interactive manipulation and display of digital pictures are also discussed.

Alouette-ISIS program summary

NASA Technical Reports Server (NTRS)

Jackson, John E.

1986-01-01

The Alouette-ISIS program was a joint undertaking between Canada and the United States. Canada provided the Alouette and ISIS spacecraft, data acquisition, and satellite control. The USA provided launch capability, satellite tracking, and data acquisition. Brief descriptions of the six spacecraft and of the investigations on each spacecraft are given. The Alouette-ISIS bibliography, order alphabetically by first author's name, is contained.

Users manual for the Variable dimension Automatic Synthesis Program (VASP)

NASA Technical Reports Server (NTRS)

White, J. S.; Lee, H. Q.

1971-01-01

A dictionary and some problems for the Variable Automatic Synthesis Program VASP are submitted. The dictionary contains a description of each subroutine and instructions on its use. The example problems give the user a better perspective on the use of VASP for solving problems in modern control theory. These example problems include dynamic response, optimal control gain, solution of the sampled data matrix Ricatti equation, matrix decomposition, and pseudo inverse of a matrix. Listings of all subroutines are also included. The VASP program has been adapted to run in the conversational mode on the Ames 360/67 computer.

Description and comparison of pharmacy technician training programs in the United States.

PubMed

Anderson, Douglas C; Draime, Juanita A; Anderson, Timothy S

2016-01-01

To describe pharmacy technician training programs in the United States and to compare pharmacy technician program characteristics between programs with and without a pharmacist on faculty and between programs with different accreditation status. Descriptive, cross-sectional study. Not applicable. United States pharmacy technician programs. Not applicable. Student class size, faculty credentials, coursework components, program length, tuition rates, and admission criteria. Currently, there are more than 698 pharmacy technician programs across 1114 campuses, with complete data available for 216 programs. Programs varied widely in terms of class sizes, faculty credentials, and admission criteria. Programs with pharmacists on faculty were significantly less expensive than were those without pharmacists (P = 0.009). Accreditation had no impact on tuition prices. This is the first study of its kind to describe and characterize pharmacy technician training programs. There is relatively little control of technician training by the profession of pharmacy. The quality of these programs in terms of student outcomes is unknown, and it should be explored. Rigorous debate and discussion is needed regarding the future of pharmacy technician roles and the training required for those roles. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Manipulator control and mechanization: A telerobot subsystem

NASA Technical Reports Server (NTRS)

Hayati, S.; Wilcox, B.

1987-01-01

The short- and long-term autonomous robot control activities in the Robotics and Teleoperators Research Group at the Jet Propulsion Laboratory (JPL) are described. This group is one of several involved in robotics and is an integral part of a new NASA robotics initiative called Telerobot program. A description of the architecture, hardware and software, and the research direction in manipulator control is given.

Utilization of a CRT display light pen in the design of feedback control systems

NASA Technical Reports Server (NTRS)

Thompson, J. G.; Young, K. R.

1972-01-01

A hierarchical structure of the interlinked programs was developed to provide a flexible computer-aided design tool. A graphical input technique and a data structure are considered which provide the capability of entering the control system model description into the computer in block diagram form. An information storage and retrieval system was developed to keep track of the system description, and analysis and simulation results, and to provide them to the correct routines for further manipulation or display. Error analysis and diagnostic capabilities are discussed, and a technique was developed to reduce a transfer function to a set of nested integrals suitable for digital simulation. A general, automated block diagram reduction procedure was set up to prepare the system description for the analysis routines.

40 CFR 86.1844-01 - Information requirements: Application for certification and submittal of information upon request.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES General Compliance Provisions for Control of Air... description of the durability group in accordance with the criteria listed in § 86.1820-01, or as otherwise...

Decision support system for nursing management control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ernst, C.J.

A knowledge representation approach for expert systems supporting decision processes in business is proposed. A description of a knowledge representation schema using a logic programming metalanguage is described, then the role of such a schema in a management expert system is demonstrated through the problem of nursing management control in hospitals. 18 references.

Evaluation of Nosocomial Infection Control Programs in health services 1

PubMed Central

Menegueti, Mayra Gonçalves; Canini, Silvia Rita Marin da Silva; Bellissimo-Rodrigues, Fernando; Laus, Ana Maria

2015-01-01

OBJECTIVES: to evaluate the Nosocomial Infection Control Programs in hospital institutions regarding structure and process indicators. METHOD: this is a descriptive, exploratory and quantitative study conducted in 2013. The study population comprised 13 Nosocomial Infection Control Programs of health services in a Brazilian city of the state of São Paulo. Public domain instruments available in the Manual of Evaluation Indicators of Nosocomial Infection Control Practices were used. RESULTS: The indicators with the highest average compliance were "Evaluation of the Structure of the Nosocomial Infection Control Programs" (75%) and "Evaluation of the Epidemiological Surveillance System of Nosocomial Infection" (82%) and those with the lowest mean compliance scores were "Evaluation of Operational Guidelines" (58.97%) and "Evaluation of Activities of Control and Prevention of Nosocomial Infection" (60.29%). CONCLUSION: The use of indicators identified that, despite having produced knowledge about prevention and control of nosocomial infections, there is still a large gap between the practice and the recommendations. PMID:25806637

Review of the Fiscal Year 2014 (FY14) Defense Environmental International Cooperation (DEIC) Program

DTIC Science & Technology

2015-05-01

spell out) originating request, including DoD action officer, email address, and commercial and DSN phone number ; 3. Description...does not display a currently valid OMB control number . 1. REPORT DATE MAY 2015 2. REPORT TYPE 3. DATES COVERED 4. TITLE AND SUBTITLE Review...of the Fiscal Year 2014 (FY14) Defense Environmental International Cooperation (DEIC) Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

76 FR 41813 - Renewal of Agency Information Collection for Higher Education Grant Program Application; Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

... Application. The information collection is currently authorized by OMB Control Number 1076-0101, which expires... Number: 1076-0101. Title: Higher Education Grant Application, 25 CFR part 40. Brief Description of...

The effectiveness of the COPE healthy lifestyles TEEN program: a school-based intervention in middle school adolescents with 12-month follow-up.

PubMed

Ardic, Aysun; Erdogan, Semra

2017-06-01

The goal of this study is to assess the applicability and long-term effectiveness of the T-COPE Healthy TEEN program on adolescent health. Obesity and mental health disorders are major public health problems in adolescents. In this context, including long-term and multiple behavioural obesity prevention programs are becoming increasingly important. A quasi-experimental design with pre-test/post-test control group and repeated measurements. Eighty-seven (45 in intervention group, 42 in control group) adolescents were included from two different middle schools in the intervention program. The data were analysed by using descriptive statistics, Pearson chi-square, Fisher's exact test, Student-t test, repeated measures of variance analysis and Cohen's d effect size. No significant difference was found between the intervention and control groups in terms of descriptive characteristics, behavioural and cognitive variables of the adolescents. Following the intervention, the adolescents in intervention groups showed improvements in nutritional behaviour, physical activity and stress management. These improvements concerned increased physical walking measured in the number of physical steps per week daily fruit and vegetable consumption and the daily quantity of water ingested. While their nutrition/physical activity knowledge significantly increased, their weight and anxiety symptoms significantly decreased. The effect of the program on body mass index, depression and health beliefs of the adolescents were not significant compared with the control group. The applicability of the T-COPE Healthy TEEN program on Turkish adolescents and its effectiveness on their health behaviours, nutrition and physical activity knowledge and stress management were revealed in this study. © 2016 John Wiley & Sons Ltd.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

The NASA Commercial Crew Program (CCP) Mission Assurance Process

NASA Technical Reports Server (NTRS)

Canfield, Amy

2016-01-01

In 2010, NASA established the Commercial Crew Program in order to provide human access to the International Space Station and low earth orbit via the commercial (non-governmental) sector. A particular challenge to NASA has been how to determine the commercial providers transportation system complies with Programmatic safety requirements. The process used in this determination is the Safety Technical Review Board which reviews and approves provider submitted Hazard Reports. One significant product of the review is a set of hazard control verifications. In past NASA programs, 100 percent of these safety critical verifications were typically confirmed by NASA. The traditional Safety and Mission Assurance (SMA) model does not support the nature of the Commercial Crew Program. To that end, NASA SMA is implementing a Risk Based Assurance (RBA) process to determine which hazard control verifications require NASA authentication. Additionally, a Shared Assurance Model is also being developed to efficiently use the available resources to execute the verifications. This paper will describe the evolution of the CCP Mission Assurance process from the beginning of the Program to its current incarnation. Topics to be covered include a short history of the CCP; the development of the Programmatic mission assurance requirements; the current safety review process; a description of the RBA process and its products and ending with a description of the Shared Assurance Model.

Perception of young adults with sickle cell disease or sickle cell trait about participation in the CHOICES randomized controlled trial.

PubMed

Hershberger, Patricia E; Gallo, Agatha M; Molokie, Robert; Thompson, Alexis A; Suarez, Marie L; Yao, Yingwei; Wilkie, Diana J

2016-06-01

To gain an in-depth understanding of the perceptions of young adults with sickle cell disease and sickle cell trait about parenthood and participating in the CHOICES randomized controlled trial that used computer-based, educational programmes. In the USA, there is insufficient education to assure that all young adults with sickle cell disease or sickle cell trait understand genetic inheritance risks and reproductive options to make informed reproductive decisions. To address this educational need, we developed a computer-based, multimedia program (CHOICES) and reformatted usual care into a computer-based (e-Book) program. We then conducted a two-year randomized controlled trial that included a qualitative component that would deepen understanding of young adults' perceptions of parenthood and use of computer-based, educational programmes. A qualitative descriptive approach completed after a randomized controlled trial. Sixty-eight men and women of childbearing age participated in semi-structured interviews at the completion of the randomized controlled trial from 2012-2013. Thematic content analysis guided the qualitative description. Three main themes were identified: (1) increasing knowledge and new ways of thinking and behaving; (2) rethinking parenting plans; and (3) appraising the program design and delivery. Most participants reported increased knowledge and rethinking of their parenting plans and were supportive of computer-based learning. Some participants expressed difficulty in determining individual transmission risks. Participants perceived the computer programs as beneficial to their learning. Future development of an Internet-based educational programme is warranted, with emphasis on providing tailored education or memory boosters about individual transmission risks. © 2015 John Wiley & Sons Ltd.

Fully probabilistic control design in an adaptive critic framework.

PubMed

Herzallah, Randa; Kárný, Miroslav

2011-12-01

Optimal stochastic controller pushes the closed-loop behavior as close as possible to the desired one. The fully probabilistic design (FPD) uses probabilistic description of the desired closed loop and minimizes Kullback-Leibler divergence of the closed-loop description to the desired one. Practical exploitation of the fully probabilistic design control theory continues to be hindered by the computational complexities involved in numerically solving the associated stochastic dynamic programming problem; in particular, very hard multivariate integration and an approximate interpolation of the involved multivariate functions. This paper proposes a new fully probabilistic control algorithm that uses the adaptive critic methods to circumvent the need for explicitly evaluating the optimal value function, thereby dramatically reducing computational requirements. This is a main contribution of this paper. Copyright © 2011 Elsevier Ltd. All rights reserved.

42 CFR 457.1 - Program description.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs and Outreach Strategies § 457.1 Program description. Title XXI... 42 Public Health 4 2010-10-01 2010-10-01 false Program description. 457.1 Section 457.1 Public...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2011 CFR

2011-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2010 CFR

2010-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

Visualization design and verification of Ada tasking using timing diagrams

NASA Technical Reports Server (NTRS)

Vidale, R. F.; Szulewski, P. A.; Weiss, J. B.

1986-01-01

The use of timing diagrams is recommended in the design and testing of multi-task Ada programs. By displaying the task states vs. time, timing diagrams can portray the simultaneous threads of data flow and control which characterize tasking programs. This description of the system's dynamic behavior from conception to testing is a necessary adjunct to other graphical techniques, such as structure charts, which essentially give a static view of the system. A series of steps is recommended which incorporates timing diagrams into the design process. Finally, a description is provided of a prototype Ada Execution Analyzer (AEA) which automates the production of timing diagrams from VAX/Ada debugger output.

Work Planning and Control - Activity-Based Work Authorization

Science.gov Websites

Good Activity Description Training & Resources WPC Feedback or Help Request DOE and UC Seals DOE UC Home Training FAQ Contact Home Welcome! The purpose of this site is to keep everyone at LBNL connected in the(Training section). Work Planning and Control (WPC) is a program focused on implementing

Saturn Apollo Program

NASA Image and Video Library

2004-04-15

This undated chart provides a description of the Saturn IB and Saturn V's Instrument Unit (IU) and its major components. Designed by NASA at the Marshall Space Flight Center (MSFC), the Instrument Unit, sandwiched between the S-IVB stage and the Apollo spacecraft, served as the Saturn's "nerve center" providing guidance and control, command and sequence of vehicle functions, telemetry, and environmental control.

A computer program to generate two-dimensional grids about airfoils and other shapes by the use of Poisson's equation

NASA Technical Reports Server (NTRS)

Sorenson, R. L.

1980-01-01

A method for generating two dimensional finite difference grids about airfoils and other shapes by the use of the Poisson differential equation is developed. The inhomogeneous terms are automatically chosen such that two important effects are imposed on the grid at both the inner and outer boundaries. The first effect is control of the spacing between mesh points along mesh lines intersecting the boundaries. The second effect is control of the angles with which mesh lines intersect the boundaries. A FORTRAN computer program has been written to use this method. A description of the program, a discussion of the control parameters, and a set of sample cases are included.

Configuration Analysis Tool (CAT). System Description and users guide (revision 1)

NASA Technical Reports Server (NTRS)

Decker, W.; Taylor, W.; Mcgarry, F. E.; Merwarth, P.

1982-01-01

A system description of, and user's guide for, the Configuration Analysis Tool (CAT) are presented. As a configuration management tool, CAT enhances the control of large software systems by providing a repository for information describing the current status of a project. CAT provides an editing capability to update the information and a reporting capability to present the information. CAT is an interactive program available in versions for the PDP-11/70 and VAX-11/780 computers.

41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

Code of Federal Regulations, 2010 CFR

2010-07-01

... standardization program developed under authority of the Federal Property and Administrative Services Act of 1949..., Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101...-Definitions § 101-29.221 Federal Specifications, Standards and Commercial Item Description Program (Federal...

41 CFR 101-29.221 - Federal Specifications, Standards and Commercial Item Description Program (Federal...

Code of Federal Regulations, 2011 CFR

2011-07-01

... standardization program developed under authority of the Federal Property and Administrative Services Act of 1949..., Standards and Commercial Item Description Program (Federal Standardization Program). 101-29.221 Section 101...-Definitions § 101-29.221 Federal Specifications, Standards and Commercial Item Description Program (Federal...

Transformational derivation of programs using the Focus system

NASA Technical Reports Server (NTRS)

Reddy, Uday S.

1988-01-01

A program derivation support system called Focus is being constructed. It will formally derive programs using the paradigm of program transformation. The following issues are discussed: (1) the integration of validation and program derivation activities in the Focus system; (2) its tree-based user interface; (3) the control of search spaces in program derivation; and (4) the structure and organization of program derivation records. The inference procedures of the system are based on the integration of functional and logic programming principles. This brings about a synthesis of paradigms that were heretofore considered far apart, such as logical and executable specifications and constructive and transformational approaches to program derivation. A great emphasis has been placed, in the design of Focus, on achieving small search spaces during program derivation. The program manipulation operations such as expansion, simplification and rewriting were designed with this objective. The role of operations that are expensive in search spaces, such as folding, has been reduced. Program derivations are documented in Focus in a way that the high level descriptions of derivations are expressed only using program level information. All the meta-level information, together with dependencies between derivations of program components, is automatically recorded by the system at a lower level of description for its own use in replay.

Automatic Generation of Supervisory Control System Software Using Graph Composition

NASA Astrophysics Data System (ADS)

Nakata, Hideo; Sano, Tatsuro; Kojima, Taizo; Seo, Kazuo; Uchida, Tomoyuki; Nakamura, Yasuaki

This paper describes the automatic generation of system descriptions for SCADA (Supervisory Control And Data Acquisition) systems. The proposed method produces various types of data and programs for SCADA systems from equipment definitions using conversion rules. At first, this method makes directed graphs, which represent connections between the equipment, from equipment definitions. System descriptions are generated using the conversion rules, by analyzing these directed graphs, and finding the groups of equipment that involve similar operations. This method can make the conversion rules multi levels by using the composition of graphs, and can reduce the number of rules. The developer can define and manage these rules efficiently.

Integration of Bilingual Emphasis Program into University Curriculum. Multiple Subjects Credential Program: Hupa, Yurok, Karuk, or Tolowa Emphasis.

ERIC Educational Resources Information Center

Bennett, Ruth

A description of the American Indian Bilingual Teacher Credential Program offered by Humboldt State University (California) provides background information on the linguistic groups served by the program. Accompanying the program descriptions are lists of lower and upper division requirements, descriptions of competency exam, program schedule,…

Archive data base and handling system for the Orbiter flying qualities experiment program

NASA Technical Reports Server (NTRS)

Myers, T. T.; Dimarco, R.; Magdaleno, R. E.; Aponso, B. L.

1986-01-01

The OFQ archives data base and handling system assembled as part of the Orbiter Flying Qualities (OFQ) research of the Orbiter Experiments Program (EOX) are described. The purpose of the OFQ archives is to preserve and document shuttle flight data relevant to vehicle dynamics, flight control, and flying qualities in a form that permits maximum use for qualified users. In their complete form, the OFQ archives contain descriptive text (general information about the flight, signal descriptions and units) as well as numerical time history data. Since the shuttle program is so complex, the official data base contains thousands of signals and very complex entries are required to obtain data. The OFQ archives are intended to provide flight phase oriented data subsets with relevant signals which are easily identified for flying qualities research.

On-line analysis capabilities developed to support the AFW wind-tunnel tests

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Hoadley, Sherwood T.; Mcgraw, Sandra M.

1992-01-01

A variety of on-line analysis tools were developed to support two active flexible wing (AFW) wind-tunnel tests. These tools were developed to verify control law execution, to satisfy analysis requirements of the control law designers, to provide measures of system stability in a real-time environment, and to provide project managers with a quantitative measure of controller performance. Descriptions and purposes of the developed capabilities are presented along with examples. Procedures for saving and transferring data for near real-time analysis, and descriptions of the corresponding data interface programs are also presented. The on-line analysis tools worked well before, during, and after the wind tunnel test and proved to be a vital and important part of the entire test effort.

Target Acquisition Performance of a Satellite Based Multiple Access Surveillance System

DOT National Transportation Integrated Search

1975-03-01

A quantitative description of the detection performance of a satellite-based surveillance system is presented. This system is one which has been proposed for CONUS coverage in an advanced air traffic control system. In addition, the computer program ...

SD-4060OCPLT4 program, user's guide

NASA Technical Reports Server (NTRS)

Glazer, J.

1973-01-01

A brief description of the Orbit Comparison Plot (OCPLT4) program is presented, along with user information and a source program listing. In addition to correcting several errors that existed in the original program, this program incorporates the following new features: (1) For any satellite whose observations are processed by the Definitive Orbit Determination System (DODS), the orbital uncertainty estimates (OUE) can be obtained via appropriate card input with no major modification to the program. (2) All satellite-related information (e.g., plotter scales, cutoff limits, plotting frequencies) is user controlled via card input. (3) Not all components of OUE must be obtained. The user has the option of obtaining only the radial component if there is no need for the other two components. (4) The altitude and time graph formats are controlled by the user and are not stored for specific satellites.

Overview of the Altair Lunar Lander Thermal Control System Design

NASA Technical Reports Server (NTRS)

Stephan, Ryan A.

2010-01-01

NASA's Constellation Program has been developed to successfully return humans to the Lunar surface by 2020. The Constellation Program includes several different project offices including Altair, which is the next generation Lunar Lander. The planned Altair missions are very different than the Lunar missions accomplished during the Apollo era. These differences have resulted in a significantly different thermal control system architecture. The current paper will summarize the Altair mission architecture and the various operational phases. In addition, the derived thermal requirements will be presented. The paper will conclude with a brief description of the thermal control system designed to meet these unique and challenging thermal requirements.

Markets for Clean Air

NASA Astrophysics Data System (ADS)

Ellerman, A. Denny; Joskow, Paul L.; Schmalensee, Richard; Montero, Juan-Pablo; Bailey, Elizabeth M.

2000-06-01

Markets for Clean Air provides a comprehensive, in-depth description and evaluation of the first three years' experience with the U.S. Acid Rain Program. This environmental control program is the world's first large-scale use of a tradable emission permit system for achieving environmental goals. The book analyzes the behavior and performance of the market for emissions permits, called allowances in the Acid Rain Program, and quantifies emission reductions, compliance costs, and cost savings associated with the trading program. The book also includes chapters on the historical context in which this pioneering program developed and the political economy of allowance allocations.

Halon Replacement Program for Aviation, Aircraft Engine Nacelle Application Phase II - Operational Comparison of Selected Extinguishants

DTIC Science & Technology

1997-05-01

Control Butterfly Hi-Pressure High Flow Control Butterfly Ejector Primary Clycol Control Valve Scrubber Fan Pressure Control Butterfly 8" Venturi ...the scrubber . 20 ■ SCRUBBER FAN BLOWER INLET VALVE VP-2 VP-3 VP-4 VP-5 VP-6 VP-7 VP-8 VP-9 VP-10 SV-1 SV-2 DESCRIPTION Atmospheric...Blower Bypass Butterfly 24" Venturi Control Butterfly 24" Test Section Exit Butterfly Ejector 10’ Secondary Inlet-Butterfly Hi-pressure Low Flow

10 CFR Appendix A to Part 605 - The Energy Research Program Office Descriptions

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false The Energy Research Program Office Descriptions A Appendix... RESEARCH FINANCIAL ASSISTANCE PROGRAM Pt. 605, App. A Appendix A to Part 605—The Energy Research Program Office Descriptions 1. Basic Energy Sciences This program supports basic science research efforts in a...

10 CFR Appendix A to Part 605 - The Energy Research Program Office Descriptions

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false The Energy Research Program Office Descriptions A Appendix... RESEARCH FINANCIAL ASSISTANCE PROGRAM Pt. 605, App. A Appendix A to Part 605—The Energy Research Program Office Descriptions 1. Basic Energy Sciences This program supports basic science research efforts in a...

10 CFR Appendix A to Part 605 - The Energy Research Program Office Descriptions

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false The Energy Research Program Office Descriptions A Appendix... RESEARCH FINANCIAL ASSISTANCE PROGRAM Pt. 605, App. A Appendix A to Part 605—The Energy Research Program Office Descriptions 1. Basic Energy Sciences This program supports basic science research efforts in a...

10 CFR Appendix A to Part 605 - The Energy Research Program Office Descriptions

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false The Energy Research Program Office Descriptions A Appendix... RESEARCH FINANCIAL ASSISTANCE PROGRAM Pt. 605, App. A Appendix A to Part 605—The Energy Research Program Office Descriptions 1. Basic Energy Sciences This program supports basic science research efforts in a...

WOLF; automatic typing program

USGS Publications Warehouse

Evenden, G.I.

1982-01-01

A FORTRAN IV program for the Hewlett-Packard 1000 series computer provides for automatic typing operations and can, when employed with manufacturer's text editor, provide a system to greatly facilitate preparation of reports, letters and other text. The input text and imbedded control data can perform nearly all of the functions of a typist. A few of the features available are centering, titles, footnotes, indentation, page numbering (including Roman numerals), automatic paragraphing, and two forms of tab operations. This documentation contains both user and technical description of the program.

Department of the Navy Supporting Data for FY1991 Budget Estimates Descriptive Summaries

DTIC Science & Technology

1990-01-01

deployments of the F/A-18 aircraft. f. (U) Engineering and technical support for AAS-38 tracker and F/A-18 C/D WSSA. g. (U) Provided support to ATARS program...for preliminary testing of RECCE/ ATARS common nose and associated air data computer (ADC) algorithms. h. (U) Initiated integration of full HARPOON and...to ATARS program for testing of flight control computer software. 28 UNCLASSIFIED 0]PgLa .e 2 4136N Budget Activity: 4 Program Elemhk* Title: F/A-18

Emergence of telerobotic control enhancement from research in machine autonomy

NASA Astrophysics Data System (ADS)

Haddad, Albert G., Sr.; Adams, John C.; Berardo, Peter A.; Ohlund, Kent O.; Van Vactor, David L.

1992-03-01

This paper provides a description of the Robotic Research Program being conducted at the Lockheed Research and Development Division Laboratories. It details the approach taken to fuse autonomy with teleoperative control. The component/enabling technologies are defined and the status of the development of those technologies is reported. CASE tools used in an accelerated development environment are identified and discussed.

Cargo Movement Operations System (CMOS) Preliminary Software Test Description, Increment II

DTIC Science & Technology

1991-06-26

occurred within this shall statement. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS...COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED ( ] ORIGINATOR CONTROL NUMBER: STD1-0004 PROGRAM OFFICE CONTROL NUMBER...ERCI ACCEPTS COMMENT: YES [ ] NO ( ] COMMENT DISPOSITION: COMMENT STATUS: OPEN ( ] CLOSED [ ] SYSTEM ENVIRONMENT STD The following comment is related

Bioresearch module design definition and space shuttle vehicle integration. Volume 3: Management and funding plan

NASA Technical Reports Server (NTRS)

1971-01-01

A description is given of the proposed project organization, documentation and reports, project planning, direction and control, related experience and facilities, and cost estimate data and options for the implementation of the bioresearch module development program.

40 CFR 91.121 - Certification procedure-recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... description of the origin and buildup of the engine, steps taken to insure that it is representative of... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Emission Standards and Certification Provisions § 91.121 Certification procedure—recordkeeping. (a) The engine manufacturer must...

40 CFR 90.121 - Certification procedure-recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the engine, steps taken to insure that it is representative of production engines, description of... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19 KILOWATTS... engine manufacturer must maintain the following adequately organized records: (1) Copies of all...

Idea Bank.

ERIC Educational Resources Information Center

Science Teacher, 1986

1986-01-01

Provides descriptions of activities and programs that have been successful with secondary science students. Includes ideas related to repairing radio-controlled cars, cooperative science-library center, observation exercises, recordkeeping skills and peer grading, DC power supply, chemistry of poison ivy, spore science, and a tic-tac-toe review…

Apollo 7 - Press Kit

NASA Technical Reports Server (NTRS)

1968-01-01

Contents include the following: General release. Mission objectives. Mission description. Flight plan. Alternate missions. Experiments. Abort model. Spacecraft structure system. The Saturn 1B launch vehicle. Flight sequence. Launch preparations. Mission control center-Houston. Manned space flight network. Photographic equipment. Apollo 7 crew. Apollo 7 test program.

Adaption of a corrector module to the IMP dynamics program

NASA Technical Reports Server (NTRS)

1972-01-01

The corrector module of the RAEIOS program and the IMP dynamics computer program were combined to achieve a date-fitting capability with the more general spacecraft dynamics models of the IMP program. The IMP dynamics program presents models of spacecraft dynamics for satellites with long, flexible booms. The properties of the corrector are discussed and a description is presented of the performance criteria and search logic for parameter estimation. A description is also given of the modifications made to add the corrector to the IMP program. This includes subroutine descriptions, common definitions, definition of input, and a description of output.

A simulation model for wind energy storage systems. Volume 3: Program descriptions

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

Interim reliability-evaluation program: analysis of the Browns Ferry, Unit 1, nuclear plant. Appendix B - system descriptions and fault trees

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mays, S.E.; Poloski, J.P.; Sullivan, W.H.

1982-07-01

This report describes a risk study of the Browns Ferry, Unit 1, nuclear plant. The study is one of four such studies sponsored by the NRC Office of Research, Division of Risk Assessment, as part of its Interim Reliability Evaluation Program (IREP), Phase II. This report is contained in four volumes: a main report and three appendixes. Appendix B provides a description of Browns Ferry, Unit 1, plant systems and the failure evaluation of those systems as they apply to accidents at Browns Ferry. Information is presented concerning front-line system fault analysis; support system fault analysis; human error models andmore » probabilities; and generic control circuit analyses.« less

STRCMACS: An extensive set of Macros for structured programming in OS/360 assembly language

NASA Technical Reports Server (NTRS)

Barth, C. W.

1974-01-01

Two techniques are discussed that have been most often referred to as structured programming. One is that of programming with high level control structures (such as the if and while) replacing the branch instruction (goto-less programming); the other is the process of developing a program by progressively refining descriptions of components in terms of more primitive components (called stepwise refinement or top-down programming). In addition to discussing what these techniques are, it is shown why their use is advised and how both can be implemented in OS assembly language by the use of a special macro instruction package.

User's guide to the Fault Inferring Nonlinear Detection System (FINDS) computer program

NASA Technical Reports Server (NTRS)

Caglayan, A. K.; Godiwala, P. M.; Satz, H. S.

1988-01-01

Described are the operation and internal structure of the computer program FINDS (Fault Inferring Nonlinear Detection System). The FINDS algorithm is designed to provide reliable estimates for aircraft position, velocity, attitude, and horizontal winds to be used for guidance and control laws in the presence of possible failures in the avionics sensors. The FINDS algorithm was developed with the use of a digital simulation of a commercial transport aircraft and tested with flight recorded data. The algorithm was then modified to meet the size constraints and real-time execution requirements on a flight computer. For the real-time operation, a multi-rate implementation of the FINDS algorithm has been partitioned to execute on a dual parallel processor configuration: one based on the translational dynamics and the other on the rotational kinematics. The report presents an overview of the FINDS algorithm, the implemented equations, the flow charts for the key subprograms, the input and output files, program variable indexing convention, subprogram descriptions, and the common block descriptions used in the program.

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

1983-01-01

The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

Evaluation of Hypertension Prevention and Control Programs in Lima, Peru.

PubMed

Chung, Bonhee; Kim, Dohyeong; Nam, Eun Woo

2018-01-01

The Korea International Cooperation Agency (KOICA) established 4 health centers to provide hypertension screening and a health support program in a deprived urban area of Lima, Peru. This case report provides a mid-term evaluation of the KOICA's hypertension prevention and control programs. A follow up study was performed on 663 residents who were diagnosed with prehypertension or hypertension (Stage 1 and 2) in the 4 KOICA health centers. Patients participated in programs designed to prevent and control hypertension through education sessions over the course of 6 months. Using simple descriptive statistics and computer simulations, we evaluated the effect of hypertension prevention and control programs on the participants. The KOICA health programs appeared to significantly contribute to lowering the blood pressure (BP) of the participants. The total number of participants with normal BP increased from none to 109. Overall, the female and younger patients responded better to the KOICA programs than the male and older participants. In addition, the average systolic BP, diastolic BP, and body mass index of all participants was significantly reduced. The KOICA programs were effective at lowering blood pressure, particularly amongst the prehypertension group than the Stage 1 and 2 hypertension groups. This suggests that providing an extensive screening service for adults with prehypertension will help control hypertension in the early stages.

Program Solicitation Number 86.1, Small Business Innovation Research Program.

DTIC Science & Technology

1986-01-31

Temperature Heat Pipe Technology DESCRIPTION: Heat pipes have been shown to provide superior growth conditions for the growth of bulk semiconductor crystals... Heat pipes allow for the establishment of isothermal conditions over large areas. This thermal property controls the distribution of impurities, and...reliable high temperature heat pipes to operate at 1325 degrees C with inert overpressures of 60 atmospheres is required for the processing of III-V

Description and Flight Test Results of the NASA F-8 Digital Fly-by-Wire Control System

NASA Technical Reports Server (NTRS)

1975-01-01

A NASA program to develop digital fly-by-wire (DFBW) technology for aircraft applications is discussed. Phase I of the program demonstrated the feasibility of using a digital fly-by-wire system for aircraft control through developing and flight testing a single channel system, which used Apollo hardware, in an F-8C airplane. The objective of Phase II of the program is to establish a technology base for designing practical DFBW systems. It will involve developing and flight testing a triplex digital fly-by-wire system using state-of-the-art airborne computers, system hardware, software, and redundancy concepts. The papers included in this report describe the Phase I system and its development and present results from the flight program. Man-rated flight software and the effects of lightning on digital flight control systems are also discussed.

Real-time data collection in Linux: a case study.

PubMed

Finney, S A

2001-05-01

Multiuser UNIX-like operating systems such as Linux are often considered unsuitable for real-time data collection because of the potential for indeterminate timing latencies resulting from preemptive scheduling. In this paper, Linux is shown to be fully adequate for precisely controlled programming with millisecond resolution or better. The Linux system calls that subserve such timing control are described and tested and then utilized in a MIDI-based program for tapping and music performance experiments. The timing of this program, including data input and output, is shown to be accurate at the millisecond level. This demonstrates that Linux, with proper programming, is suitable for real-time experiment software. In addition, the detailed description and test of both the operating system facilities and the application program itself may serve as a model for publicly documenting programming methods and software performance on other operating systems.

Defence R&D Canada's autonomous intelligent systems program

NASA Astrophysics Data System (ADS)

Digney, Bruce L.; Hubbard, Paul; Gagnon, Eric; Lauzon, Marc; Rabbath, Camille; Beckman, Blake; Collier, Jack A.; Penzes, Steven G.; Broten, Gregory S.; Monckton, Simon P.; Trentini, Michael; Kim, Bumsoo; Farell, Philip; Hopkin, Dave

2004-09-01

The Defence Research and Development Canada's (DRDC has been given strategic direction to pursue research to increase the independence and effectiveness of military vehicles and systems. This has led to the creation of the Autonomous Intelligent Systems (AIS) prgram and is notionally divide into air, land and marine vehicle systems as well as command, control and decision support systems. This paper presents an overarching description of AIS research issues, challenges and directions as well as a nominal path that vehicle intelligence will take. The AIS program requires a very close coordination between research and implementation on real vehicles. This paper briefly discusses the symbiotic relationship between intelligence algorithms and implementation mechanisms. Also presented are representative work from two vehicle specific research program programs. Work from the Autonomous Air Systems program discusses the development of effective cooperate control for multiple air vehicle. The Autonomous Land Systems program discusses its developments in platform and ground vehicle intelligence.

Space Station Program Description Document. Books 1-7

NASA Technical Reports Server (NTRS)

1984-01-01

The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.

Thermal APU/hydraulics analysis program. User's guide and programmer's manual

NASA Technical Reports Server (NTRS)

Deluna, T. A.

1976-01-01

The User's Guide information plus program description necessary to run and have a general understanding of the Thermal APU/Hydraulics Analysis Program (TAHAP) is described. This information consists of general descriptions of the APU/hydraulic system and the TAHAP model, input and output data descriptions, and specific subroutine requirements. Deck setups and input data formats are included and other necessary and/or helpful information for using TAHAP is given. The math model descriptions for the driver program and each of its supporting subroutines are outlined.

Development and Testing of a High Stability Engine Control (HISTEC) System

NASA Technical Reports Server (NTRS)

Orme, John S.; DeLaat, John C.; Southwick, Robert D.; Gallops, George W.; Doane, Paul M.

1998-01-01

Flight tests were recently completed to demonstrate an inlet-distortion-tolerant engine control system. These flight tests were part of NASA's High Stability Engine Control (HISTEC) program. The objective of the HISTEC program was to design, develop, and flight demonstrate an advanced integrated engine control system that uses measurement-based, real-time estimates of inlet airflow distortion to enhance engine stability. With improved stability and tolerance of inlet airflow distortion, future engine designs may benefit from a reduction in design stall-margin requirements and enhanced reliability, with a corresponding increase in performance and decrease in fuel consumption. This paper describes the HISTEC methodology, presents an aircraft test bed description (including HISTEC-specific modifications) and verification and validation ground tests. Additionally, flight test safety considerations, test plan and technique design and approach, and flight operations are addressed. Some illustrative results are presented to demonstrate the type of analysis and results produced from the flight test program.

Pesticide Applicator Training Manual, Category 7B: Termites and Other Wood Destroying Pests. A Training Program for the Certification of Commercial Pesticide Applicators, and Study Questions.

ERIC Educational Resources Information Center

Schmitt, John B.

This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in the termite and wood destroying pest control category. The text discusses the importance, description, biology, and control of termites, powderpost beetles, house and warf borers, carpenter ants, and…

Space station common module power system network topology and hardware development

NASA Technical Reports Server (NTRS)

Landis, D. M.

1985-01-01

Candidate power system newtork topologies for the space station common module are defined and developed and the necessary hardware for test and evaluation is provided. Martin Marietta's approach to performing the proposed program is presented. Performance of the tasks described will assure systematic development and evaluation of program results, and will provide the necessary management tools, visibility, and control techniques for performance assessment. The plan is submitted in accordance with the data requirements given and includes a comprehensive task logic flow diagram, time phased manpower requirements, a program milestone schedule, and detailed descriptions of each program task.

Development of Constellation's Launch Control System

NASA Technical Reports Server (NTRS)

Lougheed, Kirk D.; Peaden, Cary J.

2010-01-01

The paper focuses on the National Aeronautics and Space Administration (NASA) Constellation Program's Launch Control System (LCS) development effort at Kennedy Space Center (KSC). It provides a brief history of some preceding efforts to provide launch control and ground processing systems for other NASA programs, and some lessons learned from those experiences. It then provides high level descriptions of the LCS mission, objectives, organization, architecture, and progress. It discusses some of our development tenets, including our use of standards based design and use of off-the-shelf products whenever possible, incremental development cycles, and highly reliable, available, and supportable enterprise class system servers. It concludes with some new lessons learned and our plans for the future.

75 FR 32936 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

.... Applicants: New York Independent System Operator, Inc. Description: NYISO filing its Semi-Annual Reports on Demand Side Management programs and new generation projects in the New York Control Area. Filed Date: 06... Applicant. In reference to filings initiating a new proceeding, interventions or protests submitted on or...

10 CFR 60.51 - License amendment for permanent closure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... description of the program for post-permanent closure monitoring of the geologic repository. (2) A detailed... postclosure controlled area and geologic repository operations area by monuments that have been designed... tests, experiments, and any other analyses relating to backfill of excavated areas, shaft sealing, waste...

10 CFR 60.51 - License amendment for permanent closure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... description of the program for post-permanent closure monitoring of the geologic repository. (2) A detailed... postclosure controlled area and geologic repository operations area by monuments that have been designed... tests, experiments, and any other analyses relating to backfill of excavated areas, shaft sealing, waste...

10 CFR 60.51 - License amendment for permanent closure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... description of the program for post-permanent closure monitoring of the geologic repository. (2) A detailed... postclosure controlled area and geologic repository operations area by monuments that have been designed... tests, experiments, and any other analyses relating to backfill of excavated areas, shaft sealing, waste...

10 CFR 60.51 - License amendment for permanent closure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... description of the program for post-permanent closure monitoring of the geologic repository. (2) A detailed... postclosure controlled area and geologic repository operations area by monuments that have been designed... tests, experiments, and any other analyses relating to backfill of excavated areas, shaft sealing, waste...

10 CFR 60.51 - License amendment for permanent closure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... description of the program for post-permanent closure monitoring of the geologic repository. (2) A detailed... postclosure controlled area and geologic repository operations area by monuments that have been designed... tests, experiments, and any other analyses relating to backfill of excavated areas, shaft sealing, waste...

34 CFR 682.401 - Basic program agreement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or converting the records relating to its existing guaranty portfolio to an information or computer... that owns or controls the agency's existing information or computer system. If the agency is soliciting... must include a concise description of the agency's conversion project and the actual or estimated cost...

34 CFR 682.401 - Basic program agreement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... or converting the records relating to its existing guaranty portfolio to an information or computer... that owns or controls the agency's existing information or computer system. If the agency is soliciting... must include a concise description of the agency's conversion project and the actual or estimated cost...

Corrosion Engineering.

ERIC Educational Resources Information Center

White, Charles V.

A description is provided for a Corrosion and Corrosion Control course offered in the Continuing Engineering Education Program at the General Motors Institute (GMI). GMI is a small cooperative engineering school of approximately 2,000 students who alternate between six-week periods of academic study and six weeks of related work experience in…

40 CFR 92.509 - Maintenance of records; submittal of information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... information. 92.509 Section 92.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Manufacturer and... organized and indexed records: (1) General records. A description of all equipment used to test engines in...

40 CFR 92.509 - Maintenance of records; submittal of information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... information. 92.509 Section 92.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Manufacturer and... organized and indexed records: (1) General records. A description of all equipment used to test engines in...

40 CFR 92.509 - Maintenance of records; submittal of information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... information. 92.509 Section 92.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Manufacturer and... organized and indexed records: (1) General records. A description of all equipment used to test engines in...

40 CFR 92.509 - Maintenance of records; submittal of information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... information. 92.509 Section 92.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Manufacturer and... organized and indexed records: (1) General records. A description of all equipment used to test engines in...

40 CFR 92.509 - Maintenance of records; submittal of information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... information. 92.509 Section 92.509 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Manufacturer and... organized and indexed records: (1) General records. A description of all equipment used to test engines in...

40 CFR 89.124 - Record retention, maintenance, and submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... construction, including a general description of the origin and buildup of the engine, steps taken to ensure... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Emission... manufacturer of any nonroad compression-ignition engine must maintain the following adequately organized...

34 CFR 682.401 - Basic program agreement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or converting the records relating to its existing guaranty portfolio to an information or computer... that owns or controls the agency's existing information or computer system. If the agency is soliciting... must include a concise description of the agency's conversion project and the actual or estimated cost...

34 CFR 682.401 - Basic program agreement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or converting the records relating to its existing guaranty portfolio to an information or computer... that owns or controls the agency's existing information or computer system. If the agency is soliciting... must include a concise description of the agency's conversion project and the actual or estimated cost...

NIH Minority Programs.

ERIC Educational Resources Information Center

National Institutes of Health (DHHS), Bethesda, MD.

This publication contains brief descriptions of National Institutes of Health programs for underrepresented minorities, including fellowships, programs for high school students, graduate research assistantships, postdoctoral training, and programs for college students. The publication provides a description of each program, eligibility…

Nontraditional Training and Employment Progams Serving Women Directory.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

This document provides short descriptions of 125 programs providing job training and preemployment skills training for women in nontraditional occupations (primarily skilled trades and crafts). Eighteen exemplary programs in all regions of the country are described. These descriptions are followed by descriptions of other training programs,…

42 CFR 430.0 - Program description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Program description. 430.0 Section 430.0 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Provisions § 430.0 Program description. Title XIX of the Social Security Act, enacted in 1965, authorizes...

42 CFR 430.0 - Program description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Program description. 430.0 Section 430.0 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Provisions § 430.0 Program description. Title XIX of the Social Security Act, enacted in 1965, authorizes...

Force Management Methods. Task 1 Report. Current Methods

DTIC Science & Technology

1978-12-01

information about the F/FB-III MCR system is presented in USAF T.O. IF-IlIA-2-1-2 ("F-Ill Service Usage Recorder Program -- Data Collection and Reporting ...34) and T.O. 1F-Ill(B) -2-1-2 ("FB-III Service Usage Program -- Data Collection and Reporting "). The former covers application of the MCR system in F-IIIA...Control Program" NOR 71 -109 "Structural Description Report " NOR 71 -214 "Structural Fatigue Criteria" NOR 76-70 "Structural Fatigue Criteria for Saudi

X-29 flight-research program

NASA Technical Reports Server (NTRS)

Putnam, T. W.

1984-01-01

The X-29A aircraft is the first manned, experimental high-performance aircraft to be fabricated and flown in many years. The approach for expanding the X-29 flight envelope and collecting research data is described including the methods for monitoring wind divergence, flutter, and aeroservoelastic coupling of the aerodynamic forces with the structure and the flight-control system. Examples of the type of flight data to be acquired are presented along with types of aircraft maneuvers that will be flown. A brief description of the program management structure is also presented and the program schedule is discussed.

Preliminary Design Program: Vapor Compression Distillation Flight Experiment Program

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Boyda, R. B.

1995-01-01

This document provides a description of the results of a program to prepare a preliminary design of a flight experiment to demonstrate the function of a Vapor Compression Distillation (VCD) Wastewater Processor (WWP) in microgravity. This report describes the test sequence to be performed and the hardware, control/monitor instrumentation and software designs prepared to perform the defined tests. the purpose of the flight experiment is to significantly reduce the technical and programmatic risks associated with implementing a VCD-based WWP on board the International Space Station Alpha.

User's Manual for Computer Program ROTOR. [to calculate tilt-rotor aircraft dynamic characteristics

NASA Technical Reports Server (NTRS)

Yasue, M.

1974-01-01

A detailed description of a computer program to calculate tilt-rotor aircraft dynamic characteristics is presented. This program consists of two parts: (1) the natural frequencies and corresponding mode shapes of the rotor blade and wing are developed from structural data (mass distribution and stiffness distribution); and (2) the frequency response (to gust and blade pitch control inputs) and eigenvalues of the tilt-rotor dynamic system, based on the natural frequencies and mode shapes, are derived. Sample problems are included to assist the user.

LACIE performance predictor final operational capability program description, volume 3

NASA Technical Reports Server (NTRS)

1976-01-01

The requirements and processing logic for the LACIE Error Model program (LEM) are described. This program is an integral part of the Large Area Crop Inventory Experiment (LACIE) system. LEM is that portion of the LPP (LACIE Performance Predictor) which simulates the sample segment classification, strata yield estimation, and production aggregation. LEM controls repetitive Monte Carlo trials based on input error distributions to obtain statistical estimates of the wheat area, yield, and production at different levels of aggregation. LEM interfaces with the rest of the LPP through a set of data files.

Flow induced vibrations in the SSME injector heads

NASA Technical Reports Server (NTRS)

Lepore, Frank A.

1991-01-01

A description is given of the flowfield in the Space Shuttle Main Engine (SSME) powerhead, the mechanisms which control flow-induced vibrations, and previous experimental work. An in-depth description is given of the development phase of the program , which includes the analysis, design, and fabrication of liquid oxygen (LOX) posts models used in the experimental phase, as well as test facilities, equipment, and procedures used. Also covered is the experimental data analysis, which includes overall steady state powerhead flowfield as well as the high frequency response of the LOX posts.

Format( )MEDIC( )Input

NASA Astrophysics Data System (ADS)

Foster, K.

1994-09-01

This document is a description of a computer program called Format( )MEDIC( )Input. The purpose of this program is to allow the user to quickly reformat wind velocity data in the Model Evaluation Database (MEDb) into a reasonable 'first cut' set of MEDIC input files (MEDIC.nml, StnLoc.Met, and Observ.Met). The user is cautioned that these resulting input files must be reviewed for correctness and completeness. This program will not format MEDb data into a Problem Station Library or Problem Metdata File. A description of how the program reformats the data is provided, along with a description of the required and optional user input and a description of the resulting output files. A description of the MEDb is not provided here but can be found in the RAS Division Model Evaluation Database Description document.

Lights, Cameras, Pencils! Using Descriptive Video to Enhance Writing

ERIC Educational Resources Information Center

Hoffner, Helen; Baker, Eileen; Quinn, Kathleen Benson

2008-01-01

Students of various ages and abilities can increase their comprehension and build vocabulary with the help of a new technology, Descriptive Video. Descriptive Video (also known as described programming) was developed to give individuals with visual impairments access to visual media such as television programs and films. Described programs,…

8 CFR 245a.30 - Description of program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Description of program. 245a.30 Section 245a.30 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program...

8 CFR 245a.30 - Description of program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Description of program. 245a.30 Section 245a.30 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program...

8 CFR 245a.30 - Description of program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Description of program. 245a.30 Section 245a.30 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF... IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30 Description of program...

[Effects of a Facial Muscle Exercise Program including Facial Massage for Patients with Facial Palsy].

PubMed

Choi, Hyoung Ju; Shin, Sung Hee

2016-08-01

The purpose of this study was to examine the effects of a facial muscle exercise program including facial massage on the facial muscle function, subjective symptoms related to paralysis and depression in patients with facial palsy. This study was a quasi-experimental research with a non-equivalent control group non-synchronized design. Participants were 70 patients with facial palsy (experimental group 35, control group 35). For the experimental group, the facial muscular exercise program including facial massage was performed 20 minutes a day, 3 times a week for two weeks. Data were analyzed using descriptive statistics, χ²-test, Fisher's exact test and independent sample t-test with the SPSS 18.0 program. Facial muscular function of the experimental group improved significantly compared to the control group. There was no significant difference in symptoms related to paralysis between the experimental group and control group. The level of depression in the experimental group was significantly lower than the control group. Results suggest that a facial muscle exercise program including facial massage is an effective nursing intervention to improve facial muscle function and decrease depression in patients with facial palsy.

A program for mass spectrometer control and data processing analyses in isotope geology; written in BASIC for an 8K Nova 1120 computer

USGS Publications Warehouse

Stacey, J.S.; Hope, J.

1975-01-01

A system is described which uses a minicomputer to control a surface ionization mass spectrometer in the peak switching mode, with the object of computing isotopic abundance ratios of elements of geologic interest. The program uses the BASIC language and is sufficiently flexible to be used for multiblock analyses of any spectrum containing from two to five peaks. In the case of strontium analyses, ratios are corrected for rubidium content and normalized for mass spectrometer fractionation. Although almost any minicomputer would be suitable, the model used was the Data General Nova 1210 with 8K memory. Assembly language driver program and interface hardware-descriptions for the Nova 1210 are included.

Star adaptation for two-algorithms used on serial computers

NASA Technical Reports Server (NTRS)

Howser, L. M.; Lambiotte, J. J., Jr.

1974-01-01

Two representative algorithms used on a serial computer and presently executed on the Control Data Corporation 6000 computer were adapted to execute efficiently on the Control Data STAR-100 computer. Gaussian elimination for the solution of simultaneous linear equations and the Gauss-Legendre quadrature formula for the approximation of an integral are the two algorithms discussed. A description is given of how the programs were adapted for STAR and why these adaptations were necessary to obtain an efficient STAR program. Some points to consider when adapting an algorithm for STAR are discussed. Program listings of the 6000 version coded in 6000 FORTRAN, the adapted STAR version coded in 6000 FORTRAN, and the STAR version coded in STAR FORTRAN are presented in the appendices.

The standard calibration instrument automation system for the atomic absorption spectrophotometer. Part 3: Program documentation

NASA Astrophysics Data System (ADS)

Ryan, D. P.; Roth, G. S.

1982-04-01

Complete documentation of the 15 programs and 11 data files of the EPA Atomic Absorption Instrument Automation System is presented. The system incorporates the following major features: (1) multipoint calibration using first, second, or third degree regression or linear interpolation, (2) timely quality control assessments for spiked samples, duplicates, laboratory control standards, reagent blanks, and instrument check standards, (3) reagent blank subtraction, and (4) plotting of calibration curves and raw data peaks. The programs of this system are written in Data General Extended BASIC, Revision 4.3, as enhanced for multi-user, real-time data acquisition. They run in a Data General Nova 840 minicomputer under the operating system RDOS, Revision 6.2. There is a functional description, a symbol definitions table, a functional flowchart, a program listing, and a symbol cross reference table for each program. The structure of every data file is also detailed.

RoMPS concept review automatic control of space robot

NASA Technical Reports Server (NTRS)

1991-01-01

The Robot operated Material Processing in Space (RoMPS) experiment is being performed to explore the marriage of two emerging space commercialization technologies: materials processing in microgravity and robotics. This concept review presents engineering drawings and limited technical descriptions of the RoMPS programs' electrical and software systems.

75 FR 5086 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

...), Centers for Disease Control and Prevention (CDC). Background and Brief Description Colorectal Cancer (CRC) is the second leading cause of cancer- related deaths in the United States, following lung cancer... Cancer Screening Program (OMB Number 0920-0745, exp. 7/ 31/2010)--Revision--Division of Cancer Prevention...

75 FR 17921 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-08

...), Centers for Disease Control and Prevention (CDC). Background and Brief Description Colorectal Cancer (CRC) is the second leading cause of cancer- related deaths in the United States, following lung cancer... Project Colorectal Cancer Screening Program (OMB No. 0920-0745 7/31/2010)-- Revision--Division of Cancer...

76 FR 54472 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

...-Evaluation Assessments of Nutrition, Physical Activity and Obesity Programs and Policies--New--National... Prevention (CDC). Background and Brief Description The causes of obesity in the United States are complex and... nature of obesity, the Centers for Disease Control and Prevention (CDC) encourages states to adopt public...

77 FR 65011 - Notice of Proposed Information Collection: Comment Request; FHA-Insured Mortgage Loan Servicing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

... Information Collection: Comment Request; FHA- Insured Mortgage Loan Servicing Involving the Loss Mitigation... other forms of information technology, e.g., permitting electronic submission of responses. This Notice... the Loss Mitigation Programs. OMB Control Number, if applicable: 2502-0589. Description of the need...

The Status of Child Nutrition Programs in Colorado.

ERIC Educational Resources Information Center

McMillan, Daniel C.; Vigil, Herminia J.

This report provides descriptive and statistical data on the status of child nutrition programs in Colorado. The report contains descriptions of the National School Lunch Program, school breakfast programs, the Special Milk Program, the Summer Food Service Program, the Nutrition Education and Training Program, state dietary guidelines, Colorado…

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2012 CFR

2012-10-01

... programming distributor. (8) Children's Programming. Television programming directed at children 16 years of... provide 50 hours of video description per calendar quarter, either during prime time or on children's... calendar quarter, either during prime time or on children's programming, on each programming stream on...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2013 CFR

2013-10-01

... programming distributor. (8) Children's Programming. Television programming directed at children 16 years of... provide 50 hours of video description per calendar quarter, either during prime time or on children's... calendar quarter, either during prime time or on children's programming, on each programming stream on...

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Test act system description

NASA Technical Reports Server (NTRS)

1983-01-01

The engineering and fabrication of the test ACT system, produced in the third program element of the IAAC Project is documented. The system incorporates pitch-augmented stability and wing-load alleviation, plus full authority fly-by-wire control of the elevators. The pitch-augmented stability is designed to have reliability sufficient to allow flight with neutral or negative inherent longitudinal stability.

46 CFR 71.50-15 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an alternative to a drydock examination by allowing...

46 CFR 176.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... Hull and Tailshaft Examinations § 176.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative Hull Examination (AHE) Program provides you with an...

Advanced space system analysis software. Technical, user, and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Zimbelman, H. F.

1981-01-01

The LASS computer program provides a tool for interactive preliminary and conceptual design of LSS. Eight program modules were developed, including four automated model geometry generators, an associated mass properties module, an appendage synthesizer module, an rf analysis module, and an orbital transfer analysis module. The existing rigid body controls analysis module was modified to permit analysis of effects of solar pressure on orbital performance. A description of each module, user instructions, and programmer information are included.

Production Support Flight Control Computers: Research Capability for F/A-18 Aircraft at Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Carter, John F.

1997-01-01

NASA Dryden Flight Research Center (DFRC) is working with the United States Navy to complete ground testing and initiate flight testing of a modified set of F/A-18 flight control computers. The Production Support Flight Control Computers (PSFCC) can give any fleet F/A-18 airplane an in-flight, pilot-selectable research control law capability. NASA DFRC can efficiently flight test the PSFCC for the following four reasons: (1) Six F/A-18 chase aircraft are available which could be used with the PSFCC; (2) An F/A-18 processor-in-the-loop simulation exists for validation testing; (3) The expertise has been developed in programming the research processor in the PSFCC; and (4) A well-defined process has been established for clearing flight control research projects for flight. This report presents a functional description of the PSFCC. Descriptions of the NASA DFRC facilities, PSFCC verification and validation process, and planned PSFCC projects are also provided.

The Total In-Flight Simulator (TIFS) aerodynamics and systems: Description and analysis. [maneuver control and gust alleviators

NASA Technical Reports Server (NTRS)

Andrisani, D., II; Daughaday, H.; Dittenhauser, J.; Rynaski, E.

1978-01-01

The aerodynamics, control system, instrumentation complement and recording system of the USAF Total In/Flight Simulator (TIFS) airplane are described. A control system that would allow the ailerons to be operated collectively, as well as, differentially to entrance the ability of the vehicle to perform the dual function of maneuver load control and gust alleviation is emphasized. Mathematical prediction of the rigid body and the flexible equations of longitudinal motion using the level 2.01 FLEXSTAB program are included along with a definition of the vehicle geometry, the mass and stiffness distribution, the calculated mode frequencies and mode shapes, and the resulting aerodynamic equations of motion of the flexible vehicle. A complete description of the control and instrumentation system of the aircraft is presented, including analysis, ground test and flight data comparisons of the performance and bandwidth of the aerodynamic surface servos. Proposed modification for improved performance of the servos are also presented.

AIDPRF/PRFAID user's manual

NASA Technical Reports Server (NTRS)

Buck, C. H.

1975-01-01

The program documentation for the PRF ARTWORK/AIDS conversion program, which serves as the interface between the outputs of the PRF ARTWORK and AIDS programs, was presented. The document has a two-fold purpose, the first of which is a description of the software design including flowcharts of the design at the functional level. The second purpose is to provide the user with a detailed description of the input parameters and formats necessary to execute the program and a description of the output produced when the program is executed.

Clean Coal Technology Demonstration Program: Program Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Research of TREETOPS Structural Dynamics Controls Simulation Upgrade

NASA Technical Reports Server (NTRS)

Yates, Rose M.

1996-01-01

Under the provisions of contract number NAS8-40194, which was entitled 'TREETOPS Structural Dynamics and Controls Simulation System Upgrade', Oakwood College contracted to produce an upgrade to the existing TREETOPS suite of analysis tools. This suite includes the main simulation program, TREETOPS, two interactive preprocessors, TREESET and TREEFLX, an interactive post processor, TREEPLOT, and an adjunct program, TREESEL. A 'Software Design Document', which provides descriptions of the argument lists and internal variables for each subroutine in the TREETOPS suite, was established. Additionally, installation guides for both DOS and UNIX platforms were developed. Finally, updated User's Manuals, as well as a Theory Manual, were generated.

A Mathematical Model for Vertical Attitude Takeoff and Landing (VATOL) Aircraft Simulation. Volume 1; Model Description Application

NASA Technical Reports Server (NTRS)

Fortenbaugh, R. L.

1980-01-01

A mathematical model of a high performance airplane capable of vertical attitude takeoff and landing (VATOL) was developed. An off line digital simulation program incorporating this model was developed to provide trim conditions and dynamic check runs for the piloted simulation studies and support dynamic analyses of proposed VATOL configuration and flight control concepts. Development details for the various simulation component models and the application of the off line simulation program, Vertical Attitude Take-Off and Landing Simulation (VATLAS), to develop a baseline control system for the Vought SF-121 VATOL airplane concept are described.

Investigation of High-alpha Lateral-directional Control Power Requirements for High-performance Aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high-angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high-angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes ground-based piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Controlling Cocaine. Supply Versus Demand Programs

DTIC Science & Technology

1994-01-01

System Description of the Cocaine Trade, MR-236-A/AF/DPRC, Santa Monica, CA. RAND. * Kennedy, Michael, Peter Reuter, and Kevin Jack Riley (1994), A Simple...Peter Reuter, and Kevin Riley, and reviews by Richard Harwood, James Hodges, and Michael Kennedy deepened and improved this analysis. Helpful...relative to rean-ltaonprice Priefti 1.000 Actual heavy- waer treatment cost ($ mn~lons) TreatCost 9M.0 Total control budget ($ naions) Sofludgat.TrSdgate’o

The Federal Aviation Administration Plan for Research, Engineering and Development. Volume 2. Project Descriptions

DTIC Science & Technology

1989-01-01

managerial areas , including: management and control of the operational requirements of the NAS F& E Plan; preparation, management, and control of the annual... areas (capacity, safety, security, and efficiency), highlights of key programs, and a discussion of the relationships of the RE&D Plan to the NAS F& E ...release of SUA , such as restricted airspace and military operations areas , are currently limited by several factors, including manual interagency

Magnetic bearing reaction wheel. [for spacecraft attitude control

NASA Technical Reports Server (NTRS)

Sabnis, A.; Schmitt, F.; Smith, L.

1976-01-01

The results of a program for the development, fabrication and functional test of an engineering model magnetically suspended reaction wheel are described. The reaction wheel develops an angular momentum of + or - 0.5 foot-pound-second and is intended for eventual application in the attitude control of long-life interplanetary and orbiting spacecraft. A description of the wheel design and its major performance characteristics is presented. Recommendations for flight prototype development are made.

Epidemiologic programs for computers and calculators. A microcomputer program for multiple logistic regression by unconditional and conditional maximum likelihood methods.

PubMed

Campos-Filho, N; Franco, E L

1989-02-01

A frequent procedure in matched case-control studies is to report results from the multivariate unmatched analyses if they do not differ substantially from the ones obtained after conditioning on the matching variables. Although conceptually simple, this rule requires that an extensive series of logistic regression models be evaluated by both the conditional and unconditional maximum likelihood methods. Most computer programs for logistic regression employ only one maximum likelihood method, which requires that the analyses be performed in separate steps. This paper describes a Pascal microcomputer (IBM PC) program that performs multiple logistic regression by both maximum likelihood estimation methods, which obviates the need for switching between programs to obtain relative risk estimates from both matched and unmatched analyses. The program calculates most standard statistics and allows factoring of categorical or continuous variables by two distinct methods of contrast. A built-in, descriptive statistics option allows the user to inspect the distribution of cases and controls across categories of any given variable.

Compendium of Programs to Assist the Transition

DTIC Science & Technology

1993-02-01

Program Description The Interagency Placement Assistance Program (IPAP) offices maintain computerized listings of data on employees faced with...possible reduction in force (RIF) separations. Program Objective To provide placement assistance to employees faced with possible RIF separations by making... employees . 23 2/93 TRANSITION ASSISTANCE PROGRAM Short Name of Program TAP Program Description Begun in 1991, TAP is a joint program of

Inorganic Analysis in Water Quality Control Programs. Instructor's Guide.

ERIC Educational Resources Information Center

Kroner, Audrey

This two-part instructor's guide was designed for a five-day course for chemists and technicians with little or no experience in inorganic analyses. Part I provides information on course planning and management including course description, staff responsibilities, suggested course plan and agenda, timeline for planning and conducting the course,…

78 FR 22850 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... million * As defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or... software continues to be modified via a pre-planned product improvement (P3I) program in order to improve its counter- countermeasure capabilities. No software source code or algorithms will be released. The...

Control of Information. Notebook Number Three.

ERIC Educational Resources Information Center

The Network Project Notebook, 1973

1973-01-01

The common description of television as an "image" is appropriate, because everything that appears on the screen reflects the image which government and big business want to present of our society. Thus, advertisers will not buy programs which have downbeat content, and the view their advertisements present is of people who are basically happy or…

A unified teleoperated-autonomous dual-arm robotic system

NASA Technical Reports Server (NTRS)

Hayati, Samad; Lee, Thomas S.; Tso, Kam Sing; Backes, Paul G.; Lloyd, John

1991-01-01

A description is given of complete robot control facility built as part of a NASA telerobotics program to develop a state-of-the-art robot control environment for performing experiments in the repair and assembly of spacelike hardware to gain practical knowledge of such work and to improve the associated technology. The basic architecture of the manipulator control subsystem is presented. The multiarm Robot Control C Library (RCCL), a key software component of the system, is described, along with its implementation on a Sun-4 computer. The system's simulation capability is also described, and the teleoperation and shared control features are explained.

High-speed assembly language (80386/80387) programming for laser spectra scan control and data acquisition providing improved resolution water vapor spectroscopy

NASA Technical Reports Server (NTRS)

Allen, Robert J.

1988-01-01

An assembly language program using the Intel 80386 CPU and 80387 math co-processor chips was written to increase the speed of data gathering and processing, and provide control of a scanning CW ring dye laser system. This laser system is used in high resolution (better than 0.001 cm-1) water vapor spectroscopy experiments. Laser beam power is sensed at the input and output of white cells and the output of a Fabry-Perot. The assembly language subroutine is called from Basic, acquires the data and performs various calculations at rates greater than 150 faster than could be performed by the higher level language. The width of output control pulses generated in assembly language are 3 to 4 microsecs as compared to 2 to 3.7 millisecs for those generated in Basic (about 500 to 1000 times faster). Included are a block diagram and brief description of the spectroscopy experiment, a flow diagram of the Basic and assembly language programs, listing of the programs, scope photographs of the computer generated 5-volt pulses used for control and timing analysis, and representative water spectrum curves obtained using these programs.

Thermal/structural Tailoring of Engine Blades (T/STAEBL) User's Manual

NASA Technical Reports Server (NTRS)

Brown, K. W.; Clevenger, W. B.; Arel, J. D.

1994-01-01

The Thermal/Structural Tailoring of Engine Blades (T/STAEBL) system is a family of computer programs executed by a control program. The T/STAEBL system performs design optimizations of cooled, hollow turbine blades and vanes. This manual contains an overview of the system, fundamentals of the data block structure, and detailed descriptions of the inputs required by the optimizer. Additionally, the thermal analysis input requirements are described as well as the inputs required to perform a finite element blade vibrations analysis.

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

Automation of reliability evaluation procedures through CARE - The computer-aided reliability estimation program.

NASA Technical Reports Server (NTRS)

Mathur, F. P.

1972-01-01

Description of an on-line interactive computer program called CARE (Computer-Aided Reliability Estimation) which can model self-repair and fault-tolerant organizations and perform certain other functions. Essentially CARE consists of a repository of mathematical equations defining the various basic redundancy schemes. These equations, under program control, are then interrelated to generate the desired mathematical model to fit the architecture of the system under evaluation. The mathematical model is then supplied with ground instances of its variables and is then evaluated to generate values for the reliability-theoretic functions applied to the model.

Availability and characteristics of cardiac rehabilitation programs in one Brazilian state: a cross-sectional study.

PubMed

Sérvio, Thaianne Cavalcante; Ghisi, Gabriela Lima de Melo; Silva, Lilian Pinto da; Silva, Luciana Duarte Novais; Lima, Marcia Maria Oliveira; Pereira, Danielle Aparecida Gomes; Grace, Sherry L; Britto, Raquel Rodrigues

2018-03-22

Cardiac rehabilitation (CR) is a recommended model of care for cardiovascular diseases; however, is not widely available and is underutilized, especially in low- and middle-income countries. To identify the CR programs available in one Brazilian state (Minas Gerais; MG) and describe their characteristics by funding type. In this multi-center descriptive study, CR programs were identified in four MG regions and 41 CR coordinators were sent a survey to report the characteristics of their programs, including CR components described in guidelines and barriers to patients' participation. Descriptive and comparative analysis between public and private programs were carried out. Forty-one CR programs were identified, only 21.9% public. Nineteen completed the survey. The majority of CR programs offered initial assessment and physical training. Components of comprehensive CR programs that were rarely offered included treatment of tobacco dependence, psychological support and lipid control. Physical therapists were present in all CR programs. The six-minute walk test was used in most programs to assess functional capacity. Programs were located intra-hospital only in public hospitals. Phase 2 (initial outpatient) and phase 4 (maintenance) were offered significantly more in private programs when compared to public ones. The main barrier for CR participation was the lack of referral. The availability of CR programs in MG state is low, especially public programs. Most programs do not offer all core components of CR. Copyright © 2018 Associação Brasileira de Pesquisa e Pós-Graduação em Fisioterapia. Publicado por Elsevier Editora Ltda. All rights reserved.

University Urban Programs. 1991 Edition.

ERIC Educational Resources Information Center

Motschall, Melissa M., Ed.; Lobsiger, Amy J., Ed.

This directory provides detailed information on 64 university urban programs across the nation and Canada. The descriptions are organized according to state, and each includes information on the following topics: (1) general program information (program head, establishment date, organization description, current funding source, and distribution of…

Typical Toddlers' Participation in “Just-in-Time” Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study

PubMed Central

Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-01-01

Purpose Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary “just in time” on an AAC application with minimized demands. Method A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10–22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. Results All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Conclusions Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age. PMID:28586825

Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

PubMed

Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

2017-08-15

Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

A systematic review of evaluated suicide prevention programs targeting indigenous youth.

PubMed

Harlow, Alyssa F; Bohanna, India; Clough, Alan

2014-01-01

Indigenous young people have significantly higher suicide rates than their non-indigenous counterparts. There is a need for culturally appropriate and effective suicide prevention programs for this demographic. This review assesses suicide prevention programs that have been evaluated for indigenous youth in Australia, Canada, New Zealand, and the United States. The databases MEDLINE and PsycINFO were searched for publications on suicide prevention programs targeting indigenous youth that include reports on evaluations and outcomes. Program content, indigenous involvement, evaluation design, program implementation, and outcomes were assessed for each article. The search yielded 229 articles; 90 abstracts were assessed, and 11 articles describing nine programs were reviewed. Two Australian programs and seven American programs were included. Programs were culturally tailored, flexible, and incorporated multiple-levels of prevention. No randomized controlled trials were found, and many programs employed ad hoc evaluations, poor program description, and no process evaluation. Despite culturally appropriate content, the results of the review indicate that more controlled study designs using planned evaluations and valid outcome measures are needed in research on indigenous youth suicide prevention. Such changes may positively influence the future of research on indigenous youth suicide prevention as the outcomes and efficacy will be more reliable.

Innovative Power Wheelchair Control Interface: A Proof-of-Concept Study

PubMed Central

Romero, Sergio; Prather, Emily; Ramroop, Marisa; Slaibe, Emmy; Christensen, Matthew

2016-01-01

Some people without independent mobility are candidates for powered mobility but are unable to use a traditional power wheelchair joystick. This proof-of-concept study tested and further developed an innovative method of driving power wheelchairs for people whose impairments prevent them from operating commercial wheelchair controls. Our concept, Self-referenced Personal Orthotic Omni-purpose Control Interface (SPOOCI), is distinguished by referencing the control sensor not to the wheelchair frame but instead to the adjacent proximal lower-extremity segment via a custom-formed orthosis. Using a descriptive case-series design, we compared the pre–post functional power wheelchair driving skill data of 4 participants, measured by the Power Mobility Program, using descriptive analyses. The intervention consisted of standard-care power wheelchair training during 12 outpatient occupational or physical therapy sessions. All 4 participants who completed the 12-wk intervention improved their functional power wheelchair driving skills using SPOOCI, but only 3 were deemed safe to continue with power wheelchair driving. PMID:26943118

Space Ultrareliable Modular Computer (SUMC) instruction simulator

NASA Technical Reports Server (NTRS)

Curran, R. T.

1972-01-01

The design principles, description, functional operation, and recommended expansion and enhancements are presented for the Space Ultrareliable Modular Computer interpretive simulator. Included as appendices are the user's manual, program module descriptions, target instruction descriptions, simulator source program listing, and a sample program printout. In discussing the design and operation of the simulator, the key problems involving host computer independence and target computer architectural scope are brought into focus.

User's Guide for ERB 7 Matrix. Volume 1: Experiment Description and Quality Control Report for Year 1

NASA Technical Reports Server (NTRS)

Tighe, R. J.; Shen, M. Y. H.

1984-01-01

The Nimbus 7 ERB MATRIX Tape is a computer program in which radiances and irradiances are converted into fluxes which are used to compute the basic scientific output parameters, emitted flux, albedo, and net radiation. They are spatially averaged and presented as time averages over one-day, six-day, and monthly periods. MATRIX data for the period November 16, 1978 through October 31, 1979 are presented. Described are the Earth Radiation Budget experiment, the Science Quality Control Report, Items checked by the MATRIX Science Quality Control Program, and Science Quality Control Data Analysis Report. Additional material from the detailed scientific quality control of the tapes which may be very useful to a user of the MATRIX tapes is included. Known errors and data problems and some suggestions on how to use the data for further climatologic and atmospheric physics studies are also discussed.

Short description of mathematical support programs for space experiments in the Interkosmos program

NASA Technical Reports Server (NTRS)

Elyasberg, P. Y.

1979-01-01

A synopsis of programs of mathematical support designed at the Institute for Cosmic Research of the USSR Academy of Sciences for cosmic experiments being conducted in the Interkosmos Program is presented. A short description of the appropriate algorithm is given.

Clinical decision-making among new graduate nurses attending residency programs in Saudi Arabia.

PubMed

Al-Dossary, Reem Nassar; Kitsantas, Panagiota; Maddox, P J

2016-02-01

This study examined the impact of residency programs on clinical decision-making of new Saudi graduate nurses who completed a residency program compared to new Saudi graduate nurses who did not participate in residency programs. This descriptive study employed a convenience sample (N=98) of new graduate nurses from three hospitals in Saudi Arabia. A self-administered questionnaire was used to collect data. Clinical decision-making skills were measured using the Clinical Decision Making in Nursing Scale. Descriptive statistics, independent t-tests, and multiple linear regression analysis were utilized to examine the effect of residency programs on new graduate nurses' clinical decision-making skills. On average, resident nurses had significantly higher levels of clinical decision-making skills than non-residents (t=23.25, p=0.000). Enrollment in a residency program explained 86.9% of the variance in total clinical decision making controlling for age and overall grade point average. The findings of this study support evidence in the nursing literature conducted primarily in the US and Europe that residency programs have a positive influence on new graduate nurses' clinical decision-making skills. This is the first study to examine the impact of residency programs on clinical decision-making among new Saudi graduate nurses who completed a residency program. The findings of this study underscore the need for the development and implementation of residency programs for all new nurses. Copyright © 2015 Elsevier Inc. All rights reserved.

Program of Studies: Trade and Industrial: Grades 9-12.

ERIC Educational Resources Information Center

Fairfax County Schools, VA.

Part 1 of the trade and industrial education curriculum guide for grades 9-12 contains a brief program overview and Vocational Industrial Clubs of America (VICA) description, more detailed descriptions of in-school and out-of-school programs and program classification methods, a list of references, and charts of various programs and training…

Shuttle program. MCC Level C formulation requirements: Entry guidance and entry autopilot

NASA Technical Reports Server (NTRS)

Harpold, J. C.; Hill, O.

1980-01-01

A set of preliminary entry guidance and autopilot software formulations is presented for use in the Mission Control Center (MCC) entry processor. These software formulations meet all level B requirements. Revision 2 incorporates the modifications required to functionally simulate optimal TAEM targeting capability (OTT). Implementation of this logic in the MCC must be coordinated with flight software OTT implementation and MCC TAEM guidance OTT. The entry guidance logic is based on the Orbiter avionics entry guidance software. This MCC requirements document contains a definition of coordinate systems, a list of parameter definitions for the software formulations, a description of the entry guidance detailed formulation requirements, a description of the detailed autopilot formulation requirements, a description of the targeting routine, and a set of formulation flow charts.

Toward virtual anatomy: a stereoscopic 3-D interactive multimedia computer program for cranial osteology.

PubMed

Trelease, R B

1996-01-01

Advances in computer visualization and user interface technologies have enabled development of "virtual reality" programs that allow users to perceive and to interact with objects in artificial three-dimensional environments. Such technologies were used to create an image database and program for studying the human skull, a specimen that has become increasingly expensive and scarce. Stereoscopic image pairs of a museum-quality skull were digitized from multiple views. For each view, the stereo pairs were interlaced into a single, field-sequential stereoscopic picture using an image processing program. The resulting interlaced image files are organized in an interactive multimedia program. At run-time, gray-scale 3-D images are displayed on a large-screen computer monitor and observed through liquid-crystal shutter goggles. Users can then control the program and change views with a mouse and cursor to point-and-click on screen-level control words ("buttons"). For each view of the skull, an ID control button can be used to overlay pointers and captions for important structures. Pointing and clicking on "hidden buttons" overlying certain structures triggers digitized audio spoken word descriptions or mini lectures.

24 CFR 92.61 - Program description.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Development HOME INVESTMENT PARTNERSHIPS PROGRAM Allocation Formula Insular Areas Program § 92.61 Program... occupied) and, for tenant assistance, number of households to be assisted; (3) A timetable for the... use other forms of investment not described in § 92.205(b), a description of the other forms of...

24 CFR 92.61 - Program description.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Development HOME INVESTMENT PARTNERSHIPS PROGRAM Allocation Formula Insular Areas Program § 92.61 Program... occupied) and, for tenant assistance, number of households to be assisted; (3) A timetable for the... use other forms of investment not described in § 92.205(b), a description of the other forms of...

34 CFR 675.44 - Program description.

Code of Federal Regulations, 2010 CFR

2010-07-01

... provide flexibility in strengthening the self-help-through-work element in financial aid packaging..., DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.44 Program description. (a) An institution that satisfies the definition of “work-college” in § 675.41(a) and wishes to...

Material development for laminar flow control wing panels

NASA Technical Reports Server (NTRS)

Meade, L. E.

1977-01-01

The absence of suitable porous materials or techniques for the economic perforation of surface materials has previously restricted the design of laminar flow control (LFC) wing panels to a consideration of mechanically slotted LFC surfaces. A description is presented of a program which has been conducted to exploit recent advances in materials and manufacturing technology for the fabrication of reliable porous or perforated LFC surface panels compatible with the requirements of subsonic transport aircraft. Attention is given to LFC design criteria, surface materials, surface concepts, the use of microporous composites, perforated composites, and perforated metal. The described program was successful in that fabrication processes were developed for producing predictable perforated panels both of composite and of metal.

Control/structure interaction design methodology

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.; Layman, William E.

1989-01-01

The Control Structure Interaction Program is a technology development program for spacecraft that exhibit interactions between the control system and structural dynamics. The program objectives include development and verification of new design concepts (such as active structure) and new tools (such as a combined structure and control optimization algorithm) and their verification in ground and possibly flight test. The new CSI design methodology is centered around interdisciplinary engineers using new tools that closely integrate structures and controls. Verification is an important CSI theme and analysts will be closely integrated to the CSI Test Bed laboratory. Components, concepts, tools and algorithms will be developed and tested in the lab and in future Shuttle-based flight experiments. The design methodology is summarized in block diagrams depicting the evolution of a spacecraft design and descriptions of analytical capabilities used in the process. The multiyear JPL CSI implementation plan is described along with the essentials of several new tools. A distributed network of computation servers and workstations was designed that will provide a state-of-the-art development base for the CSI technologies.

An overview of the active flexible wing program

NASA Technical Reports Server (NTRS)

Cole, Stanley R.; Perry, Boyd, III; Miller, Gerald D.

1991-01-01

An outline of the Active Flexible Wing (AFW) project that was meant to serve as an introduction to an entire session of the Computational Control Workshop is presented. Following background information on the project is a description of the AFW wind tunnel model and results from the initial wind tunnel test of the AFW model under the current project. Emphasis is on major project accomplishments. The AFW project is an effort to demonstrate aeroelastic control through the application of digital controls technology. Active flutter suppression and active control of maneuver loads during high speed rolling maneuvers are examined.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geiger, K.; Longacre, R.; Srivastava, D.K.

VNI is a general-purpose Monte-Carlo event-generator, which includes the simulation of lepton-lepton, lepton-hadron, lepton-nucleus, hadron-hadron, hadron-nucleus, and nucleus-nucleus collisions. It uses the real-time evolution of parton cascades in conjunction with a self-consistent hadronization scheme, as well as the development of hadron cascades after hadronization. The causal evolution from a specific initial state (determined by the colliding beam particles) is followed by the time-development of the phase-space densities of partons, pre-hadronic parton clusters, and final-state hadrons, in position-space, momentum-space and color-space. The parton-evolution is described in terms of a space-time generalization of the familiar momentum-space description of multiple (semi)hard interactions inmore » QCD, involving 2 {r_arrow} 2 parton collisions, 2 {r_arrow} 1 parton fusion processes, and 1 {r_arrow} 2 radiation processes. The formation of color-singlet pre-hadronic clusters and their decays into hadrons, on the other hand, is treated by using a spatial criterion motivated by confinement and a non-perturbative model for hadronization. Finally, the cascading of produced prehadronic clusters and of hadrons includes a multitude of 2 {r_arrow} n processes, and is modeled in parallel to the parton cascade description. This paper gives a brief review of the physics underlying VNI, as well as a detailed description of the program itself. The latter program description emphasizes easy-to-use pragmatism and explains how to use the program (including simple examples), annotates input and control parameters, and discusses output data provided by it.« less

Development and testing of the data automation subsystem for the Mariner Mars 1971 spacecraft

NASA Technical Reports Server (NTRS)

1971-01-01

The data automation subsystem designed and built as part of the Mariner Mars 1971 program, sequences and controls the science instruments and formats all science data. A description of the subsystem with emphasis on major changes relative to Mariner Mars 1969 is presented. In addition, the complete test phase is described.

A Review of the Efficacy of the Picture Exchange Communication System Intervention

ERIC Educational Resources Information Center

Preston, Deborah; Carter, Mark

2009-01-01

The Picture Exchange Communication System (PECS) is a communication program that has become widely used, especially with children with autism. This paper reports the results of a review of the empirical literature on PECS. A descriptive review is provided of the 27 studies identified, which included randomized controlled trials (RCTs), other group…

Automated landing, rollout, and turnoff using MLS and magnetic cable sensors

NASA Technical Reports Server (NTRS)

Pines, S.; Schmidt, S. F.; Mann, F. I.

1977-01-01

A description of the simulation program used to study the landing approach, rollout and turnoff of the B737-100 aircraft utilizing MLS and a buried magnetic leader cable as navigation aids is presented. Simulation results are given and show the concept to be both feasible and practical for commercial type aircraft terminal area control.

77 FR 33464 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... days of this notice. Proposed Project BioSense 2.0 (OMB No. 0920-0824, exp. 10/31/2012)--Revision...). Background and Brief Description: The BioSense Program was created by congressional mandate as part of the... Centers for Disease Control and Prevention (CDC) in 2003. BioSense is a near real-time surveillance system...

Risk management in fly-by-wire systems

NASA Technical Reports Server (NTRS)

Knoll, Karyn T.

1993-01-01

A general description of various types of fly-by-wire systems is provided. The risks inherent in digital flight control systems, like those used in the Space Shuttle, are identified. The results of a literature survey examining risk management methods in use throughout the aerospace industry are presented. The applicability of these methods to the Space Shuttle program is discussed.

Digital Troposcatter Performance Model

DTIC Science & Technology

1983-12-01

Dist Speia DIIBUTON STATEMR AO Approved tot public relemg ** - DistributionUnlimited __________ Communications. Control and Information Systems ...for digital troposcatter communication system design is described. Propagation and modem performance *are modeled. These include Path Loss and RSL...designing digital troposcatter systems . A User’s Manual Report discusses the use of the computer program TROPO. The description of the structure and logical

Creation of a competency-based professional development program for infection preventionists guided by the APIC Competency Model: steps in the process.

PubMed

Bernard, Heather; Hackbarth, Diana; Olmsted, Russell N; Murphy, Denise

2018-06-07

Infection Preventionists have varying levels of educational preparation. Many have no prior experience in IP. The diversity makes design of professional development programs challenging. Recent surveys suggest that only about half of practicing IPs are board certified. There is an urgent need to employ competent IP's to drive improvement in patient outcomes. This is a project that utilized the APIC Competency Model to create a professional development program characterizing three career stages. Methods included a review of literature on professional development; a survey of IP competence; an assessment of job descriptions and performance evaluations; and a crosswalk of IP competencies. The professional development program includes competency - based IP job descriptions and performance evaluations for each career stage; a professional portfolio; and a toolkit for supervisors. Participants agreed that application of the model resulted in tools which are more closely aligned with current roles for IPs; and increased satisfaction and motivation with the new program. Competent and knowledgeable IP's are crucial to optimizing efficacy of IPC programs. A professional development program has the potential to guide staff orientation, improve satisfaction and retention, improve patient outcomes and promote a positive trajectory in advancing practice. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Ohio Entrepreneurship Education Grant Winners Showcase (Columbus, Ohio, May 11, 1988).

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This publication contains over 80 descriptions of grant-winning entrepreneurship education programs offered in Ohio public schools. Each program description contains information on some or all of the following: sponsoring school(s), project title, purpose, target population, program format and content, site and time of program offering, project…

[Synthesis of 107 Workplace Literacy Programs.

ERIC Educational Resources Information Center

Bussert, Kathy M.

A study examined information from 107 workplace literacy program descriptions from the United States and drew conclusions about joint partnerships, funding, and flexibility. Most of the program descriptions were found in an extensive search using the ERIC database. The programs described were from 1989 and 1990. Some of the findings were the…

MECDAS: A distributed data acquisition system for experiments at MAMI

NASA Astrophysics Data System (ADS)

Krygier, K. W.; Merle, K.

1994-02-01

For the coincidence experiments with the three spectrometer setup at MAMI an experiment control and data acquisition system has been built and was put successfully into final operation in 1992. MECDAS is designed as a distributed system using communication via Ethernet and optical links. As the front end, VME bus systems are used for real time purposes and direct hardware access via CAMAC, Fastbus or VMEbus. RISC workstations running UNIX are used for monitoring, data archiving and online and offline analysis of the experiment. MECDAS consists of several fixed programs and libraries, but large parts of readout and analysis can be configured by the user. Experiment specific configuration files are used to generate efficient and powerful code well adapted to special problems without additional programming. The experiment description is added to the raw collection of partially analyzed data to get self-descriptive data files.

Educational Services Directory, 2000-2001.

ERIC Educational Resources Information Center

Louisiana Public Broadcasting, Baton Rouge.

Louisiana Public Broadcasting's (LPB's) Educational Services Directory presents an alphabetical listing of instructional television (ITV) program descriptions, a program schedule, and other educational services information. Sections in this Directory include: ITV Series Descriptions; ITV Broadcast Schedule; Program Content matrix; Going the…

A system for aerodynamic design and analysis of supersonic aircraft. Part 3: Computer program description

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1980-01-01

The computer program documentation for the design and analysis of supersonic configurations is presented. Schematics and block diagrams of the major program structure, together with subroutine descriptions for each module are included.

78 FR 40421 - Inquiry Regarding Video Description in Video Programming Distributed on Television and on the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... the status, benefits, and costs of video description on television and Internet- provided video... operational issues, costs, and benefits of providing video descriptions for video programming that is... document, the Federal Communications Commission (Commission) solicits public comment on issues related to...

76 FR 24820 - Supplemental Nutrition Assistance Program: Review of Major Changes in Program Design and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... estimated. The proposed rule will require that State agencies provide descriptive information regarding the... Burden on Respondents Section 272.12(3) requires that States provide both descriptive and analytic... analysis in the normal course of their own planning and decisionmaking. The descriptive information should...

10 CFR 34.13 - Specific license for industrial radiography.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicant submits a description of a program for inspections of the job performance of each radiographer and... description of its initial training and examination program for radiographers in the subjects outlined in § 34... submits a description of the applicant's overall organizational structure as it applies to the radiation...

Curriculum Designs for Tech Prep Clusters. PACE '94.

ERIC Educational Resources Information Center

Schoon, Kenneth J., Ed.; Wiles, Clyde A., Ed.

This booklet contains descriptions of various Tech Prep programs developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each entry includes general program descriptions, curriculum outlines, and course descriptions. The clusters and their specialty areas described in the booklet are:…

Development of a multi-media crew-training program for the Terminal Configured Vehicle Mission Simulator

NASA Technical Reports Server (NTRS)

Houck, J. A.; Markos, A. T.

1980-01-01

This paper describes the work being done at the National Aeronautics and Space Administration's (NASA) Langley Research Center on the development of a multi-media crew-training program for the Terminal Configured Vehicle (TCV) Mission Simulator. Brief descriptions of the goals and objectives of the TCV Program and of the TCV Mission Simulator are presented. A detailed description of the training program is provided along with a description of the performance of the first group of four commercial pilots to be qualified in the TCV Mission Simulator.

Development of a multi-media crew-training program for the terminal configured vehicle mission simulator

NASA Technical Reports Server (NTRS)

Rhouck, J. A.; Markos, A. T.

1980-01-01

This paper describes the work being done at the National Aeronautics and Space Administration's (NASA) Langley Research Center on the development of a multi-media crew-training program for the Terminal Configured Vehicle (TCV) Mission Simulator. Brief descriptions of the goals and objectives of the TCV Program and of the TCV Mission Simulator are presented. A detailed description of the training program is provided along with a description of the performance of the first group of four commercial pilots to be qualified in the TCV Mission Simulator.

Learning class descriptions from a data base of spectral reflectance of soil samples

NASA Technical Reports Server (NTRS)

Kimes, D. S.; Irons, J. R.; Levine, E. R.; Horning, N. A.

1993-01-01

Consideration is given to a program developed to learn class descriptions from positive and negative training examples of spectral reflectance data of bare soils. It is a combination of 'learning by example' and the generate-and-test paradigm and is designed to provide a robust learning environment that can handle error-prone data. The program was tested by having it learn class descriptions of various categories of organic carbon content, iron oxide content, and particle size distribution in soils. These class descriptions were then used to classify an array of targets. The program found the sequence of relationships between bands that contained the most important information to distinguish the classes. Physical explanations for the class descriptions obtained are presented.

The calibration and flight test performance of the space shuttle orbiter air data system

NASA Technical Reports Server (NTRS)

Dean, A. S.; Mena, A. L.

1983-01-01

The Space Shuttle air data system (ADS) is used by the guidance, navigation and control system (GN&C) to guide the vehicle to a safe landing. In addition, postflight aerodynamic analysis requires a precise knowledge of flight conditions. Since the orbiter is essentially an unpowered vehicle, the conventional methods of obtaining the ADS calibration were not available; therefore, the calibration was derived using a unique and extensive wind tunnel test program. This test program included subsonic tests with a 0.36-scale orbiter model, transonic and supersonic tests with a smaller 0.2-scale model, and numerous ADS probe-alone tests. The wind tunnel calibration was further refined with subsonic results from the approach and landing test (ALT) program, thus producing the ADS calibration for the orbital flight test (OFT) program. The calibration of the Space Shuttle ADS and its performance during flight are discussed in this paper. A brief description of the system is followed by a discussion of the calibration methodology, and then by a review of the wind tunnel and flight test programs. Finally, the flight results are presented, including an evaluation of the system performance for on-board systems use and a description of the calibration refinements developed to provide the best possible air data for postflight analysis work.

Satellite Power System (SPS) financial/management scenarios

NASA Technical Reports Server (NTRS)

Vajk, J. P.

1978-01-01

The possible benefits of a Satellite Power System (SPS) program, both domestically and internationally, justify detailed and imaginative investigation of the issues involved in financing and managing such a large-scale program. In this study, ten possible methods of financing a SPS program are identified ranging from pure government agency to private corporations. The following were analyzed and evaluated: (1) capital requirements for SPS; (2) ownership and control; (3) management principles; (4) organizational forms for SPS; (5) criteria for evaluation; (6) detailed description and preliminary evaluation of alternatives; (7) phased approaches; and (8) comparative evaluation. Key issues and observations and recommendations for further study are also presented.

How to Succeed with Academically Underprepared Students: A Catalog of Successful Practices.

ERIC Educational Resources Information Center

Noel, Lee, Ed.; Levitz, Randi, Ed.

Program descriptions, articles, an annotated bibliography, and a survey report on programs and services for students who are underprepared for college work as freshmen are presented. The survey report considers program design and delivery strategies at about 300 colleges, and the program descriptions concern: advising, basic skills instruction and…

Using the Wilderness to Facilitate Adjustment to College: An Updated Description of Wilderness Orientation Programs.

ERIC Educational Resources Information Center

Davis-Berman, Jennifer; Berman, Dene

1996-01-01

Updated description of 38 wilderness orientation programs currently affiliated with U.S. colleges and universities includes program enrollment, length, cost, types of leaders, training, and sponsorship. Discusses program philosophies, goals, reasons for using the wilderness, and critical and emerging issues. Compares data to previous research.…

Descriptive Analysis of Secondary Special Education and Transition Services Model Programs.

ERIC Educational Resources Information Center

Rusch, Frank R.; And Others

This monograph provides a descriptive analysis of five grant programs funded by the Office of Special Education and Rehabilitative Services (OSERS) in 1984. The programs were designed to stimulate the improvement and development of programs for secondary special education and to strengthen and coordinate education, training, and related services…

World Perspective Case Descriptions on Educational Programs for Adults: Portugal.

ERIC Educational Resources Information Center

Soares de Melo, Alvaro; Cristovao, Artur F. A. C.

The case descriptions of two adult education programs in Portual contained in this document are part of a set that reflects a cooperative effort by adult educators to increase international understanding of various educational programs for adults in their societal context. A face sheet for each program provides this information: name,…

Advanced detection, isolation and accommodation of sensor failures: Real-time evaluation

NASA Technical Reports Server (NTRS)

Merrill, Walter C.; Delaat, John C.; Bruton, William M.

1987-01-01

The objective of the Advanced Detection, Isolation, and Accommodation (ADIA) Program is to improve the overall demonstrated reliability of digital electronic control systems for turbine engines by using analytical redundacy to detect sensor failures. The results of a real time hybrid computer evaluation of the ADIA algorithm are presented. Minimum detectable levels of sensor failures for an F100 engine control system are determined. Also included are details about the microprocessor implementation of the algorithm as well as a description of the algorithm itself.

The Physician's Workstation: Recording a Physical Examination Using a Controlled Vocabulary

PubMed Central

Cimino, James J.; Barnett, G. Octo

1987-01-01

A system has been developed which runs on MS-DOS personal computers and serves as an experimental model of a physician's workstation. The program provides an interface to a controlled vocabulary which allows rapid selection of appropriate terms and modifiers for entry of clinical information. Because it captures patient descriptions, it has the ability to serve as an intermediary between the physician and computer-based medical knowledge resources. At present, the vocabulary permits rapid, reliable representation of cardiac physical examination findings.

A randomized controlled trial to evaluate self-determination theory for exercise adherence and weight control: rationale and intervention description

PubMed Central

Silva, Marlene N; Markland, David; Minderico, Cláudia S; Vieira, Paulo N; Castro, Margarida M; Coutinho, Sílvia R; Santos, Teresa C; Matos, Margarida G; Sardinha, Luís B; Teixeira, Pedro J

2008-01-01

Background Research on the motivational model proposed by Self-Determination Theory (SDT) provides theoretically sound insights into reasons why people adopt and maintain exercise and other health behaviors, and allows for a meaningful analysis of the motivational processes involved in behavioral self-regulation. Although obesity is notoriously difficult to reverse and its recidivism is high, adopting and maintaining a physically active lifestyle is arguably the most effective strategy to counteract it in the long-term. The purposes of this study are twofold: i) to describe a 3-year randomized controlled trial (RCT) aimed at testing a novel obesity treatment program based on SDT, and ii) to present the rationale behind SDT's utility in facilitating and explaining health behavior change, especially physical activity/exercise, during obesity treatment. Methods Study design, recruitment, inclusion criteria, measurements, and a detailed description of the intervention (general format, goals for the participants, intervention curriculum, and main SDT strategies) are presented. The intervention consists of a 1-year group behavioral program for overweight and moderately obese women, aged 25 to 50 (and pre-menopausal), recruited from the community at large through media advertisement. Participants in the intervention group meet weekly or bi-weekly with a multidisciplinary intervention team (30 2 h sessions in total), and go through a program covering most topics considered critical for successful weight control. These topics and especially their delivery were adapted to comply with SDT and Motivational Interviewing guidelines. Comparison group receive a general health education curriculum. After the program, all subjects are follow-up for a period of 2 years. Discussion Results from this RCT will contribute to a better understanding of how motivational characteristics, particularly those related to physical activity/exercise behavioral self-regulation, influence treatment success, while exploring the utility of Self-Determination Theory for promoting health behavior change in the context of obesity. Trial Registration Clinical Trials Gov. Identifier NCT00513084 PMID:18613959

Development and testing of the infrared radiometer for the Mariner Venus/Mercury 1973 spacecraft

NASA Technical Reports Server (NTRS)

Clarke, T. C.

1975-01-01

The science objectives, development history, functional description, and testing of the Mariner Venus/Mercury 1973 infrared radiometer are discussed. Included in the functional description section is a thorough discussion of the IRR optical system, electronic operation, and thermal control. Signal development and its conversion to engineering units is traced, starting with the radiant space object, passing through the IRR optics and electronics, and culminating with data number development and interpretation. The test program section includes discussion of IRR calibration and alignment verification. Finally, the problems and failures encountered by the IRR during the period of its development and testing are reviewed.

Study of aerodynamic technology for VSTOL fighter attack aircraft

NASA Technical Reports Server (NTRS)

Burhans, W., Jr.; Crafta, V. J., Jr.; Dannenhoffer, N.; Dellamura, F. A.; Krepski, R. E.

1978-01-01

Vertical short takeoff aircraft capability, supersonic dash capability, and transonic agility were investigated for the development of Fighter/attack aircraft to be accommodated on ships smaller than present aircraft carriers. Topics covered include: (1) description of viable V/STOL fighter/attack configuration (a high wing, close-coupled canard, twin-engine, control configured aircraft) which meets or exceeds specified levels of vehicle performance; (2) estimates of vehicle aerodynamic characteristics and the methodology utilized to generate them; (3) description of propulsion system characteristics and vehicle mass properties; (4) identification of areas of aerodynamic uncertainty; and (5) a test program to investigate the areas of aerodynamic uncertainty in the conventional flight mode.

User's manual for generalized ILSGLD-ILS glide slope performance prediction : multipath scattering

DOT National Transportation Integrated Search

1976-11-01

This manual presents the computer program package for the generalized ILSGLD scattering model. The text includes a complete description of the program itself as well as 3 brief descriptions : of the ILS system and antenna patterns. The program listin...

HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3

EPA Science Inventory

This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...

GERTS GQ User's Manual.

ERIC Educational Resources Information Center

Akiba, Y.; And Others

This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

Aerospace Resources for Science and Technology Education.

ERIC Educational Resources Information Center

Maley, Donald, Ed.; Smith, Kenneth L., Ed.

This publication on Aerospace Programs is a special edition of "Technology Education" featuring descriptions of 15 select aerospace education programs from diverse localities spanning the full range of instructional levels. Following introductory material, the monograph contains the following largely unedited program descriptions: (1)…

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

Correlation signatures of wet soils and snows. [algorithm development and computer programming

NASA Technical Reports Server (NTRS)

Phillips, M. R.

1972-01-01

Interpretation, analysis, and development of algorithms have provided the necessary computational programming tools for soil data processing, data handling and analysis. Algorithms that have been developed thus far, are adequate and have been proven successful for several preliminary and fundamental applications such as software interfacing capabilities, probability distributions, grey level print plotting, contour plotting, isometric data displays, joint probability distributions, boundary mapping, channel registration and ground scene classification. A description of an Earth Resources Flight Data Processor, (ERFDP), which handles and processes earth resources data under a users control is provided.

Aeroelastic analysis for helicopter rotors with blade appended pendulum vibration absorbers. Mathematical derivations and program user's manual

NASA Technical Reports Server (NTRS)

Bielawa, R. L.

1982-01-01

Mathematical development is presented for the expanded capabilities of the United Technologies Research Center (UTRC) G400 Rotor Aeroelastic Analysis. This expanded analysis, G400PA, simulates the dynamics of teetered rotors, blade pendulum vibration absorbers and the higher harmonic excitations resulting from prescribed vibratory hub motions and higher harmonic blade pitch control. Formulations are also presented for calculating the rotor impedance matrix appropriate to these higher harmonic blade excitations. This impedance matrix and the associated vibratory hub loads are intended as the rotor blade characteristics elements for use in the Simplified Coupled Rotor/Fuselage Vibration Analysis (SIMVIB). Sections are included presenting updates to the development of the original G400 theory, and material appropriate to the user of the G400PA computer program. This material includes: (1) a general descriptionof the tructuring of the G400PA FORTRAN coding, (2) a detaild description of the required input data and other useful information for successfully running the program, and (3) a detailed description of the output results.

Promoting weight control at the worksite: a pilot program of self-motivation using payroll-based incentives.

PubMed

Jeffery, R W; Forster, J L; Snell, M K

1985-03-01

Thirty-six individuals participated in a worksite weight-loss program in which the central component was a self-motivation program of biweekly payroll deductions refunded contingent on meeting self-selected weight-loss goals. Half were assigned to early treatment and the remainder to a delayed treatment control group. Nine additional individuals also enrolled at the time of delayed treatment and were included in descriptive analyses of factors associated with weight loss. Results showed low program attrition over 6 months (6%) and mean weight losses (12.3 lb) that are competitive with those obtained in clinical settings. Although not different at baseline, participants in the delayed treatment group lost more than twice as much weight as those in the early treatment condition. This difference was interpreted as either a strong seasonal effect or a critical mass effect related to the proportion of employees at the worksite participating in the program. We conclude that self-motivation programs for health behavior change using the payroll system as an organization framework offer a promising new methodology for promoting healthful behaviors in work settings.

SRM Manual, Selected Resource Materials: Description and Evaluation.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Special Educational Services Branch.

Provided in the manual is descriptive and evaluative information on 67 instructional materials or programs frequently used with exceptional children in Alberta schools. A flow chart describes the three methods of using the manual: l) to obtain descriptive and evaluative information of an instruction program in the manual 2) to classify and record…

46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CODING: DESCRIPTIVE QUESTIONNAIRE (UA-D-6.0)

EPA Science Inventory

This purpose of this SOP is to define the coding strategy for the Descriptive Questionnaire. This questionnaire was developed for use in the Arizona NHEXAS project and the Border study. Keywords: data; coding; descriptive questionnaire.

The U.S.-Mexico Border Program is sponso...

VASP- VARIABLE DIMENSION AUTOMATIC SYNTHESIS PROGRAM

NASA Technical Reports Server (NTRS)

White, J. S.

1994-01-01

VASP is a variable dimension Fortran version of the Automatic Synthesis Program, ASP. The program is used to implement Kalman filtering and control theory. Basically, it consists of 31 subprograms for solving most modern control problems in linear, time-variant (or time-invariant) control systems. These subprograms include operations of matrix algebra, computation of the exponential of a matrix and its convolution integral, and the solution of the matrix Riccati equation. The user calls these subprograms by means of a FORTRAN main program, and so can easily obtain solutions to most general problems of extremization of a quadratic functional of the state of the linear dynamical system. Particularly, these problems include the synthesis of the Kalman filter gains and the optimal feedback gains for minimization of a quadratic performance index. VASP, as an outgrowth of the Automatic Synthesis Program, has the following improvements: more versatile programming language; more convenient input/output format; some new subprograms which consolidate certain groups of statements that are often repeated; and variable dimensioning. The pertinent difference between the two programs is that VASP has variable dimensioning and more efficient storage. The documentation for the VASP program contains a VASP dictionary and example problems. The dictionary contains a description of each subroutine and instructions on its use. The example problems include dynamic response, optimal control gain, solution of the sampled data matrix Riccati equation, matrix decomposition, and a pseudo-inverse of a matrix. This program is written in FORTRAN IV and has been implemented on the IBM 360. The VASP program was developed in 1971.

A social marketing theory-based diet-education program for women ages 54 to 83 years improved dietary status.

PubMed

Francis, Sarah L; Taylor, Martha L

2009-12-01

Social Marketing Theory is a comprehensive approach of program development encompassing the needs and preferences of the intended audience. It was hypothesized a Social Marketing Theory-based, registered dietitian-led, in-home, cardiovascular disease-targeted diet-education program would improve the dietary status of community-residing older women. Using a randomized control group design, this 90-day program in two North Carolina counties included 58 women (30 control; 28 intervention) ages 54 to 83 years. Data were collected using the Mini Nutritional Assessment, three 3-day food records, and program evaluations. The intervention group received two individual registered dietitian-led in-home education sessions and the control group received education material mailings (Visits 2 and 3). Pretested education materials were used. Visits/mailings were scheduled 28 to 30 days apart. Variables measured included cardiovascular disease-related dietary practices and dietary status (Mini Nutritional Assessment). Data were analyzed using descriptive statistics, paired sample t tests, multivariant analyses, and independent t tests. Intervention and control Mini Nutritional Assessment scores improved (P=0.0001). Intervention subjects consumed more fiber than control (P=0.013) and reduced sodium intake (P=0.02). Controls reduced energy (P=0.01) and cholesterol intakes (P=0.029), likely because of the decreased food intake. The majority (n=51, 87.9%) rated the program as good to excellent and almost all (n=55, 94.8%) would recommend the program to a friend. The most popular features of the program were the individualized sessions (n=20, 34.5%) and diet analyses (n=11, 19%). These results suggest that cardiovascular disease diet-education materials utilizing Social Marketing Theory principles can lead to improved dietary status among community-residing older women.

Atmospheric Science Program. Summaries of research in FY 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This report provides descriptions for all projects funded by ESD under annual contracts in FY 1994. Each description contains the project`s title; three-year funding history (in thousands of dollars); the contract period over which the funding applies; the name(s) of the principal investigator(s); the institution(s) conducting the projects; and the project`s objectives, products, approach, and results to date (for most projects older than one year). Project descriptions are categorized within the report according to program areas: atmospheric chemistry, atmospheric dynamics, and support operations. Within these categories, the descriptions are ordered alphabetically by principal investigator. Each program area is preceded bymore » a brief text that defines the program area, states it goals and objectives, lists principal research questions, and identifies program managers. Appendixes provide the addresses and telephone numbers of the principal investigators and define the acronyms used.« less

A descriptive study of past experiences with weight-loss treatment.

PubMed

Burke, Lora E; Steenkiste, Ann; Music, Edvin; Styn, Mindi A

2008-04-01

Overweight and obesity affect more than 60% of the adult population in the United States. Most adults who are overweight have a history of previous weight-loss treatment. Exploring individuals' past experiences with weight-loss treatment may allow improvements to the current approach to treatment. To examine individuals' prior experiences with weight-loss treatment, their treatment preferences, and what they found to be most and least satisfying. Cross-sectional descriptive study. Individuals (N=155) who had registered for a weight-loss study wait list and met standard criteria for a weight-loss program (aged 18 to 55 years and body mass index between 25 and 42). Questionnaire packets were mailed to participants. Descriptive analyses of the participants' past history with weight-loss treatment, treatment preference, self-efficacy, therapeutic efficacy, barriers to adherence to weight-loss treatment, barriers to healthy eating, and experiences associated with following a low-fat diet. One hundred ten participants (71%) returned completed questionnaire packets. The sample (82% white, 84% female, aged 42.6+/-8.5 years, and body mass index 33.5+/-5.3) was representative of those who seek weight-loss treatment in research settings. Participants were, on average, aged 21.1+/-8.9 years when they first tried a weight-loss program; 96.3% had tried to lose weight since that first time. The two most frequently tried programs were doing it on their own (93.5%) and commercial programs (70.8%). Barriers included having trouble controlling what I eat when hungry (71.3%), difficulty motivating myself to eat appropriately (66.2%), and using food as a reward (59.3%). Preferred weight-loss regimens were doing it on their own (30.6%) and a research program (22.4%). Participants were not seeking their preferred treatment. These data can be used to improve weight-loss programs by tailoring programs to meet the needs and preferences of participants.

Core Engine Noise Control Program. Volume III. Prediction Methods

DTIC Science & Technology

1974-08-01

turbofan engines , and Method (C) is based on an analytical description of viscous wake interaction between adjoining blade rows. Turbine Tone/ Jet ...levels for turbojet , turboshaft and turbofan engines . The turbojet data correlate highest and the turbofan data correlate lowest. Turbine Noise Noise...different engines were examined for combustor, jet and fan noise. Tnree turbojet , two turboshaft and two turbofan

Configuration Manual Polarized Proton Collider at RHIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alekseev, I.; Allgower, C.; Bai, M.

2006-01-01

In this report we present our design to accelerate and store polarized protons in RHIC, with the level of polarization, luminosity, and control of systematic errors required by the approved RHIC spin physics program. We provide an overview of the physics to be studied using RHIC with polarized proton beams, and a brief description of the accelerator systems required for the project.

Benefits of Career and Technical Student Organizations' on Female and Racial Minority Students' Psychosocial and Achievement Outcomes

ERIC Educational Resources Information Center

Aragon, Steven R.; Alfeld, Corinne; Hansen, David M.

2013-01-01

The purpose of this study was to determine to what extent do CTSOs affect student psychosocial and achievement outcomes (above and beyond stand-alone CTE programs) when controlling for gender and race. Using a cross-sectional descriptive research design, a total of 5,677 students from 10 states were surveyed regarding their high school…

Advanced control technology and airworthiness flying qualities requirements

NASA Technical Reports Server (NTRS)

Snyder, C. T.

1976-01-01

Flying quality requirements are specified in terms of the complete pilot-airframe-systems loop, the task, and the environment. Results from a study of flying qualities are reported. A review of the treatment of failure cases in various flying quality requirements is presented along with a description of the methods used and relevant lessons learned from recent Autoland certification programs.

The Apollo spacecraft: A chronology. Volume 2: 8 November 1962 - 30 September 1964

NASA Technical Reports Server (NTRS)

Morse, M. L.; Bays, J. K.

1973-01-01

A chronology of the Apollo spacecraft development and production program is presented. The subjects discussed are: (1) defining contractural relations, (2) developing hardware distinctions, and (3) developing software ground rules. Illustrations, drawings, and photographs are used extensively to supplement the technical writing. Descriptions of life support systems, communication equipment, propulsion systems, control devices, and spacecraft components are provided.

Training of Personnel to Work with Young Children in India.

ERIC Educational Resources Information Center

Kahalakdina, M.

1984-01-01

Describes recruitment procedures for child care workers in India. Includes a description of training programs, training needs and approaches, and curriculum and training procedures. Monitoring and evaluation of child welfare programs are discussed. Appendices include descriptions of and norms for training programs. (AS)

76 FR 57989 - Video Programming and Accessibility Advisory Committee; Announcement of Date of Next Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... FEDERAL COMMUNICATIONS COMMISSION [DA 11-1527] Video Programming and Accessibility Advisory.... SUMMARY: This document announces the next meeting of the Video Programming Accessibility Advisory... Commission regarding video description, and the delivery of video description, access to emergency...

44 CFR 59.2 - Description of program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program GENERAL PROVISIONS General § 59.2 Description of program. (a) The National Flood Insurance Act of 1968 was enacted by title... previously unavailable flood insurance protection to property owners in flood-prone areas. Mudslide (as...

44 CFR 59.2 - Description of program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program GENERAL PROVISIONS General § 59.2 Description of program. (a) The National Flood Insurance Act of 1968 was enacted by title... previously unavailable flood insurance protection to property owners in flood-prone areas. Mudslide (as...

44 CFR 59.2 - Description of program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program GENERAL PROVISIONS General § 59.2 Description of program. (a) The National Flood Insurance Act of 1968 was enacted by title... previously unavailable flood insurance protection to property owners in flood-prone areas. Mudslide (as...

44 CFR 59.2 - Description of program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION National Flood Insurance Program GENERAL PROVISIONS General § 59.2 Description of program. (a) The National Flood Insurance Act of 1968 was enacted by title... previously unavailable flood insurance protection to property owners in flood-prone areas. Mudslide (as...

Facilitating central line-associated bloodstream infection prevention: a qualitative study comparing perspectives of infection control professionals and frontline staff.

PubMed

McAlearney, Ann Scheck; Hefner, Jennifer L

2014-10-01

Infection control professionals (ICPs) play a critical role in implementing and managing healthcare-associated infection reduction interventions, whereas frontline staff are responsible for delivering direct and ongoing patient care. The objective of our study was to determine if ICPs and frontline staff have different perspectives about the facilitators and challenges of central line-associated bloodstream infection (CLABSI) prevention program success. We conducted key informant interviews at 8 hospitals that participated in the Agency for Healthcare Research and Quality CLABSI prevention initiative called "On the CUSP: Stop BSI." We analyzed interview data from 50 frontline nurses and 26 ICPs to identify common themes related to program facilitators and challenges. We identified 4 facilitators of CLABSI program success: education, leadership, data, and consistency. We also identified 3 common challenges: lack of resources, competing priorities, and physician resistance. However, the perspective of ICPs and frontline nurses differed. Whereas ICPs tended to focus on general descriptions, frontline staff noted program specifics and often discussed concrete examples. Our results suggest that ICPs need to take into account the perspectives of staff nurses when implementing infection control and broader quality improvement initiatives. Further, the deliberate inclusion of frontline staff in the implementation of these programs may be critical to program success. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Contracts and Management Services FY 1996 Site Support Program Plan: WBS 6.10.14. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knoll, J.M. Jr.

1995-09-01

This is the Contracts and Management Services site support program plan for the US DOE Hanford site. The topics addressed in the program plan include a mission statement, program objectives, planning assumptions, program constraints, work breakdown structure, milestone list, milestone description sheets, and activity detail including cost accounting narrative summary, approved funding budget, and activity detailed description.

Parents Plus Systemic, Solution-Focused Parent Training Programs: Description, Review of the Evidence Base, and Meta-Analysis.

PubMed

Carr, Alan; Hartnett, Dan; Brosnan, Eileen; Sharry, John

2017-09-01

Parents Plus (PP) programs are systemic, solution-focused, group-based interventions. They are designed for delivery in clinical and community settings as treatment programs for families with child-focused problems, such as behavioral difficulties, disruptive behavior disorders, and emotional disorders in young people with and without developmental disabilities. PP programs have been developed for families of preschoolers, preadolescent children, and teenagers, as well as for separated or divorced families. Seventeen evaluation studies involving over 1,000 families have shown that PP programs have a significant impact on child behavior problems, goal attainment, and parental satisfaction and stress. The effect size of 0.57 (p < .001) from a meta-analysis of 10 controlled studies for child behavior problems compares favorably with those of meta-analyses of other well-established parent training programs with large evidence bases. In controlled studies, PP programs yielded significant (p < .001) effect sizes for goal attainment (d = 1.51), parental satisfaction (d = 0.78), and parental stress reduction (d = 0.54). PP programs may be facilitated by trained front-line mental health and educational professionals. © 2016 Family Process Institute.

Investigation of medium and high temperature phase change materials

NASA Technical Reports Server (NTRS)

Heine, D.; Kraehling, H.

1979-01-01

A detailed description of the programs for acquisition and analysis of the test results is given. Basically it concerns three programs. The TEST program controls the recording of the test data. With the THELLI program it is possible to follow the temperature curve recorded for each individual thermoelement during the test. With the AUSW program the test data can be analyzed, to determine, for example, the melting point and the start of melting. The first results of the service life tests are discussed. From these it is attempted to draw inferences for the subsequent tests. An attempt is made to focus on the determination of the area-related mass loss, the reduction in thickness and the corrosion rate as well as optical and scanning electron microscope evaluation.

Experience with Ada on the F-18 High Alpha Research Vehicle Flight Test Program

NASA Technical Reports Server (NTRS)

Regenie, Victoria A.; Earls, Michael; Le, Jeanette; Thomson, Michael

1992-01-01

Considerable experience was acquired with Ada at the NASA Dryden Flight Research Facility during the on-going High Alpha Technology Program. In this program, an F-18 aircraft was highly modified by the addition of thrust-vectoring vanes to the airframe. In addition, substantial alteration was made in the original quadruplex flight control system. The result is the High Alpha Research Vehicle. An additional research flight control computer was incorporated in each of the four channels. Software for the research flight control computer was written in Ada. To date, six releases of this software have been flown. This paper provides a detailed description of the modifications to the research flight control system. Efficient ground-testing of the software was accomplished by using simulations that used the Ada for portions of their software. These simulations are also described. Modifying and transferring the Ada for flight software to the software simulation configuration has allowed evaluation of this language. This paper also discusses such significant issues in using Ada as portability, modifiability, and testability as well as documentation requirements.

Experience with Ada on the F-18 High Alpha Research Vehicle flight test program

NASA Technical Reports Server (NTRS)

Regenie, Victoria A.; Earls, Michael; Le, Jeanette; Thomson, Michael

1994-01-01

Considerable experience has been acquired with Ada at the NASA Dryden Flight Research Facility during the on-going High Alpha Technology Program. In this program, an F-18 aircraft has been highly modified by the addition of thrust-vectoring vanes to the airframe. In addition, substantial alteration was made in the original quadruplex flight control system. The result is the High Alpha Research Vehicle. An additional research flight control computer was incorporated in each of the four channels. Software for the research flight control computer was written Ada. To date, six releases of this software have been flown. This paper provides a detailed description of the modifications to the research flight control system. Efficient ground-testing of the software was accomplished by using simulations that used the Ada for portions of their software. These simulations are also described. Modifying and transferring the Ada flight software to the software simulation configuration has allowed evaluation of this language. This paper also discusses such significant issues in using Ada as portability, modifiability, and testability as well as documentation requirements.

Applying Standard Interfaces to a Process-Control Language

NASA Technical Reports Server (NTRS)

Berthold, Richard T.

2005-01-01

A method of applying open-operating-system standard interfaces to the NASA User Interface Language (UIL) has been devised. UIL is a computing language that can be used in monitoring and controlling automated processes: for example, the Timeliner computer program, written in UIL, is a general-purpose software system for monitoring and controlling sequences of automated tasks in a target system. In providing the major elements of connectivity between UIL and the target system, the present method offers advantages over the prior method. Most notably, unlike in the prior method, the software description of the target system can be made independent of the applicable compiler software and need not be linked to the applicable executable compiler image. Also unlike in the prior method, it is not necessary to recompile the source code and relink the source code to a new executable compiler image. Abstraction of the description of the target system to a data file can be defined easily, with intuitive syntax, and knowledge of the source-code language is not needed for the definition.

Space Research and Technology Program: Program and specific objectives, document approval

NASA Technical Reports Server (NTRS)

1982-01-01

A detailed view of the Space Research and Technology program work breakdown structure is provided down to the specific objective level. Goals or objectives at each of these levels are set forth. The specific objective narratives are structured into several parts. First, a short paragraph statement of the specific objective is given. This is followed by a list of subobjectives. A list of targets is then provided for those areas of the specific objective that are amenable to a quantitative description of technical accomplishment and schedule. Fluid and thermal physics, materials and structures, computer science and electronics, space energy conversion, multidisciplinary research, controls and human factors, chemical propulsion, spacecraft systems, transportation systems, platform systems, and spacecraft systems technology comprise the principal research programs.

Parent Involvement Handbook.

ERIC Educational Resources Information Center

Caplan, Arna

This handbook on parent involvement, designed to be used with preschool programs, was developed by the Jefferson County Public Schools in Lakewood, Colorado. Included are: (1) a general statement about parent involvement in an early childhood program, (2) a description of the Jefferson County Early Childhood Program, (3) a description of the…

Agriscience Education for the Middle School.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

This curriculum guide, which is intended for middle school agriculture teachers in Virginia, outlines a three-course competency-based agriscience program to give middle school students an understanding of basic science concepts through agriculture. The guide begins with a program description that includes descriptions of the program's three…

The Best of the Network 1993.

ERIC Educational Resources Information Center

Middle Grades Reading Network, Evansville, IN.

This booklet presents descriptions of 19 reading programs that encourage Indiana middle-grade students to read. The programs described in the booklet were part of the Middle Grades Reading Network and were funded with competitive $5000 "minigrants." Essays (descriptions of the reading programs) in the booklet are: "Building a…

Honors: Getting Started.

ERIC Educational Resources Information Center

Etheridge, Sandra Y.

This paper provides a description of the development of an honors program at Gulf Coast Community College (GCCC). The description is organized around three flow charts corresponding to different stages in the program's development, and which are followed by more detailed explanations. The first flow chart deals with program planning and…

77 FR 48102 - Closed Captioning and Video Description of Video Programming

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... Captioning and Video Description of Video Programming AGENCY: Federal Communications Commission. [[Page 48103..., enacted by the Twenty-First Century Communications and Video Accessibility Act of 2010 (CVAA), which...) establishing requirements for closed captioning on video programming to ensure access by persons with hearing...

Report on the Analysis of Some Process-Oriented Curricula. An Annotated Listing. Program Report R101.

ERIC Educational Resources Information Center

Bernstein, Susan; And Others

This report contains 20 summary-descriptions of curriculum programs and materials selected by the Institute for possible inclusion in its synthesis and validation of a K-6 process-promoting curriculum. Each description includes information on the developer and publisher plus a list of references (mostly published descriptions and critiques).…

CDC/1000: a Control Data Corporation remote batch terminal emulator for Hewlett-Packard minicomputers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, D.E.

1981-02-01

The Control Data Corporation Type 200 User Terminal utilizes a unique communications protocol to provide users with batch mode remote terminal access to Control Data computers. CDC/1000 is a software subsystem that implements this protocol on Hewlett-Packard minicomputers running the Real Time Executive III, IV, or IVB operating systems. This report provides brief descriptions of the various software modules comprising CDC/1000, and contains detailed instructions for integrating CDC/1000 into the Hewlett Packard operating system and for operating UTERM, the user interface program for CDC/1000. 6 figures.

An adaptive maneuvering logic computer program for the simulation of one-to-one air-to-air combat. Volume 2: Program description

NASA Technical Reports Server (NTRS)

Burgin, G. H.; Owens, A. J.

1975-01-01

A detailed description is presented of the computer programs in order to provide an understanding of the mathematical and geometrical relationships as implemented in the programs. The individual sbbroutines and their underlying mathematical relationships are described, and the required input data and the output provided by the program are explained. The relationship of the adaptive maneuvering logic program with the program to drive the differential maneuvering simulator is discussed.

Process description language: an experiment in robust programming for manufacturing systems

NASA Astrophysics Data System (ADS)

Spooner, Natalie R.; Creak, G. Alan

1998-10-01

Maintaining stable, robust, and consistent software is difficult in face of the increasing rate of change of customers' preferences, materials, manufacturing techniques, computer equipment, and other characteristic features of manufacturing systems. It is argued that software is commonly difficult to keep up to date because many of the implications of these changing features on software details are obscure. A possible solution is to use a software generation system in which the transformation of system properties into system software is made explicit. The proposed generation system stores the system properties, such as machine properties, product properties and information on manufacturing techniques, in databases. As a result this information, on which system control is based, can also be made available to other programs. In particular, artificial intelligence programs such as fault diagnosis programs, can benefit from using the same information as the control system, rather than a separate database which must be developed and maintained separately to ensure consistency. Experience in developing a simplified model of such a system is presented.

Long wavelength propagation capacity, version 1.1 (computer diskette)

NASA Astrophysics Data System (ADS)

1994-05-01

File Characteristics: software and data file. (72 files); ASCII character set. Physical Description: 2 computer diskettes; 3 1/2 in.; high density; 1.44 MB. System Requirements: PC compatible; Digital Equipment Corp. VMS; PKZIP (included on diskette). This report describes a revision of the Naval Command, Control and Ocean Surveillance Center RDT&E Division's Long Wavelength Propagation Capability (LWPC). The first version of this capability was a collection of separate FORTRAN programs linked together in operation by a command procedure written in an operating system unique to the Digital Equipment Corporation (Ferguson & Snyder, 1989a, b). A FORTRAN computer program named Long Wavelength Propagation Model (LWPM) was developed to replace the VMS control system (Ferguson & Snyder, 1990; Ferguson, 1990). This was designated version 1 (LWPC-1). This program implemented all the features of the original VMS plus a number of auxiliary programs that provided summaries of the files and graphical displays of the output files. This report describes a revision of the LWPC, designated version 1.1 (LWPC-1.1)

40 CFR 233.11 - Program description.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Program description. 233.11 Section 233.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE... moving mining equipment. ...

40 CFR 233.11 - Program description.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Program description. 233.11 Section 233.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE... moving mining equipment. ...

40 CFR 233.11 - Program description.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Program description. 233.11 Section 233.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE... moving mining equipment. ...

40 CFR 233.11 - Program description.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Program description. 233.11 Section 233.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE... moving mining equipment. ...

40 CFR 233.11 - Program description.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Program description. 233.11 Section 233.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE... moving mining equipment. ...

A Descriptive and Evaluative Analysis of Program Planning Literature, 1950-1983.

ERIC Educational Resources Information Center

Sork, Thomas J.; Buskey, John H.

1986-01-01

Literature that presents a complete program planning model was described and analyzed using explicitly defined and uniformly applied descriptive and evaluative dimensions. Several observations about the current state of the program planning literature are made, and recommendations designed to strengthen the literature are offered. (Author/CT)

Adopt-a-Grandchild Program: Volunteer Handbook.

ERIC Educational Resources Information Center

Gulf Coast Jewish Family Services, Inc., Clearwater, FL.

Developed by the Gulf Coast Jewish Family Service, this handbook describes the Adopt-a-Grandchild Program, which matches older volunteers with children in need of adult guidance. The handbook is divided into the following sections: (1) program description; (2) guidelines for professional volunteers; (3) a job description for volunteers; (4)…

The Counseling Program at the University of Zulia: An International Program

ERIC Educational Resources Information Center

Vera, George Davy

2011-01-01

A personal description of the international counselor education program at the University of Zulia in Venezuela is presented including educational objectives of the counseling degree, various services counselors are trained to provide, and a sample curriculum. This description serves as an example of one international counselor education program…

13 CFR 108.10 - Description of the New Markets Venture Capital Program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equity capital investments in smaller enterprises located in low-income geographic areas. SBA also awards... Venture Capital Program. 108.10 Section 108.10 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Introduction to Part 108 § 108.10 Description of the...

Community College Exemplary Instructional Programs, 1988-1989.

ERIC Educational Resources Information Center

Fideler, Elizabeth F., Ed.; Bazer, Gerald, Ed.

Second in an annual series, this volume presents brief descriptions of a number of outstanding community college instructional programs identified by the National Council of Instructional Administrators (NCIA). Each description includes the address and telephone number of the college in which the program operates, and the names of the college…

Community College Exemplary Instructional Programs, Volume III.

ERIC Educational Resources Information Center

Fideler, Elizabeth F., Ed.; Bazer, Gerald, Ed.

Third in an annual series, this volume presents brief descriptions of a number of outstanding community college instructional programs identified by the National Council of Instructional Administrators (NCIA). Each description includes the address and telephone number of the college in which the program operates, and the names of the college…

Exemplary Academic Programs at the Community College. Volume I.

ERIC Educational Resources Information Center

Bazer, Gerald, Ed.

Brief descriptions are provided of 54 community college programs identified as outstanding by the National Council of Instructional Administrators. Organized alphabetically by program title, the descriptions include the name of the college president, the name of a contact person, and the name, address, and telephone number of the college. The…

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

ERIC Educational Resources Information Center

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

40 CFR 282.71 - Massachusetts State-Administered Program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Environmental Protection, 1 Winter Street, Boston, MA 02108 or Massachusetts Department of Fire Services, P.O. Box 1025, State Road, Stowe, MA 01775. The elements are listed below: (1) State statutes and.... (4) Program description. The Program Description (PD) and any other material submitted as part of the...

40 CFR 282.71 - Massachusetts State-Administered Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Environmental Protection, 1 Winter Street, Boston, MA 02108 or Massachusetts Department of Fire Services, P.O. Box 1025, State Road, Stowe, MA 01775. The elements are listed below: (1) State statutes and.... (4) Program description. The Program Description (PD) and any other material submitted as part of the...

40 CFR 282.71 - Massachusetts State-Administered Program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Environmental Protection, 1 Winter Street, Boston, MA 02108 or Massachusetts Department of Fire Services, P.O. Box 1025, State Road, Stowe, MA 01775. The elements are listed below: (1) State statutes and.... (4) Program description. The Program Description (PD) and any other material submitted as part of the...

40 CFR 282.71 - Massachusetts State-Administered Program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Environmental Protection, 1 Winter Street, Boston, MA 02108 or Massachusetts Department of Fire Services, P.O. Box 1025, State Road, Stowe, MA 01775. The elements are listed below: (1) State statutes and.... (4) Program description. The Program Description (PD) and any other material submitted as part of the...

Practical Considerations in Evaluating Patient/Consumer Health Education Programs.

ERIC Educational Resources Information Center

Bryant, Nancy H.

This report contains brief descriptions of seven evaluative efforts and outcomes of health education programs, some considerations of problems encountered in evaluating the programs, and detailed descriptions of two case studies: (1) a process evaluation of preoperative teaching and (2) a retrospective study of visiting nurse association use by…

Art Partners: Art and the Artist/the Person and the Medium [and] Art Partners: Curriculum Guide.

ERIC Educational Resources Information Center

Cranford Board of Education, NJ.

The program description and curriculum for Art Partners, a Cranford, New Jersey, after-school program to meet the needs of artistically talented children in grades 3-6, are provided. The program description includes information on: a suggested sequence of activities for 38 sessions, program organization, the artist-in-residence component, area art…

Data Science Programs in U.S. Higher Education: An Exploratory Content Analysis of Program Description, Curriculum Structure, and Course Focus

ERIC Educational Resources Information Center

Tang, Rong; Sae-Lim, Watinee

2016-01-01

In this study, an exploratory content analysis of 30 randomly selected Data Science (DS) programs from eight disciplines revealed significant gaps in current DS education in the United States. The analysis centers on linguistic patterns of program descriptions, curriculum requirements, and DS course focus as pertaining to key skills and domain…

A three-dimensional, compressible, laminar boundary-layer method for general fuselages. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Wie, Yong-Sun

1990-01-01

This user's manual contains a complete description of the computer programs developed to calculate three-dimensional, compressible, laminar boundary layers for perfect gas flow on general fuselage shapes. These programs include the 3-D boundary layer program (3DBLC), the body-oriented coordinate program (BCC), and the streamline coordinate program (SCC). Subroutine description, input, output and sample case are discussed. The complete FORTRAN listings of the computer programs are given.

Aerospace Flywheel Technology Development for IPACS Applications

NASA Technical Reports Server (NTRS)

McLallin, Kerry L.; Jansen, Ralph H.; Fausz, Jerry; Bauer, Robert D.

2001-01-01

The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) are cooperating under a space act agreement to sponsor the research and development of aerospace flywheel technologies to address mutual future mission needs. Flywheel technology offers significantly enhanced capability or is an enabling technology. Generally these missions are for energy storage and/or integrated power and attitude control systems (IPACS) for mid-to-large satellites in low earth orbit. These missions require significant energy storage as well as a CMG or reaction wheel function for attitude control. A summary description of the NASA and AFRL flywheel technology development programs is provided, followed by specific descriptions of the development plans for integrated flywheel system tests for IPACS applications utilizing both fixed and actuated flywheel units. These flywheel system development tests will be conducted at facilities at AFRL and NASA Glenn Research Center and include participation by industry participants Honeywell and Lockheed Martin.

A distributed computing model for telemetry data processing

NASA Astrophysics Data System (ADS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-05-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

A distributed computing model for telemetry data processing

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Scott, Kevin L.; Weismuller, Steven P.

1994-01-01

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

Computer programs for generation and evaluation of near-optimum vertical flight profiles

NASA Technical Reports Server (NTRS)

Sorensen, J. A.; Waters, M. H.; Patmore, L. C.

1983-01-01

Two extensive computer programs were developed. The first, called OPTIM, generates a reference near-optimum vertical profile, and it contains control options so that the effects of various flight constraints on cost performance can be examined. The second, called TRAGEN, is used to simulate an aircraft flying along an optimum or any other vertical reference profile. TRAGEN is used to verify OPTIM's output, examine the effects of uncertainty in the values of parameters (such as prevailing wind) which govern the optimum profile, or compare the cost performance of profiles generated by different techniques. A general description of these programs, the efforts to add special features to them, and sample results of their usage are presented.

Performance Analysis and Design Synthesis (PADS) computer program. Volume 2: Program description, part 2

NASA Technical Reports Server (NTRS)

1972-01-01

The QL module of the Performance Analysis and Design Synthesis (PADS) computer program is described. Execution of this module is initiated when and if subroutine PADSI calls subroutine GROPE. Subroutine GROPE controls the high level logical flow of the QL module. The purpose of the module is to determine a trajectory that satisfies the necessary variational conditions for optimal performance. The module achieves this by solving a nonlinear multi-point boundary value problem. The numerical method employed is described. It is an iterative technique that converges quadratically when it does converge. The three basic steps of the module are: (1) initialization, (2) iteration, and (3) culmination. For Volume 1 see N73-13199.

Training and Personnel Systems Technology R and D Program Description FY 93

DTIC Science & Technology

1992-07-24

instructional strategies provide the best training in ICAT applications, and (c) demonstration of microcomputer authoring techniques for rapid development...learning strategies for language training, (b) develop a behavioral taxonomy to evaluate Military Intelligence (MI) performance and to characterize the...training requirements for collective tasks. In FY93, plans are to: (a) develop training strategies for sustaining command and control skills, and (b

BETA: Behavioral testability analyzer and its application to high-level test generation and synthesis for testability. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Chen, Chung-Hsing

1992-01-01

In this thesis, a behavioral-level testability analysis approach is presented. This approach is based on analyzing the circuit behavioral description (similar to a C program) to estimate its testability by identifying controllable and observable circuit nodes. This information can be used by a test generator to gain better access to internal circuit nodes and to reduce its search space. The results of the testability analyzer can also be used to select test points or partial scan flip-flops in the early design phase. Based on selection criteria, a novel Synthesis for Testability approach call Test Statement Insertion (TSI) is proposed, which modifies the circuit behavioral description directly. Test Statement Insertion can also be used to modify circuit structural description to improve its testability. As a result, Synthesis for Testability methodology can be combined with an existing behavioral synthesis tool to produce more testable circuits.

Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

NASA Technical Reports Server (NTRS)

1976-01-01

The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

Motion Cueing Algorithm Development: New Motion Cueing Program Implementation and Tuning

NASA Technical Reports Server (NTRS)

Houck, Jacob A. (Technical Monitor); Telban, Robert J.; Cardullo, Frank M.; Kelly, Lon C.

2005-01-01

A computer program has been developed for the purpose of driving the NASA Langley Research Center Visual Motion Simulator (VMS). This program includes two new motion cueing algorithms, the optimal algorithm and the nonlinear algorithm. A general description of the program is given along with a description and flowcharts for each cueing algorithm, and also descriptions and flowcharts for subroutines used with the algorithms. Common block variable listings and a program listing are also provided. The new cueing algorithms have a nonlinear gain algorithm implemented that scales each aircraft degree-of-freedom input with a third-order polynomial. A description of the nonlinear gain algorithm is given along with past tuning experience and procedures for tuning the gain coefficient sets for each degree-of-freedom to produce the desired piloted performance. This algorithm tuning will be needed when the nonlinear motion cueing algorithm is implemented on a new motion system in the Cockpit Motion Facility (CMF) at the NASA Langley Research Center.

Leadership Styles at Middle- and Early-College Programs: A Quantitative Descriptive Correlational Study

ERIC Educational Resources Information Center

Berksteiner, Earl J.

2013-01-01

The purpose of this quantitative descriptive correlational study was to determine if associations existed between middle- and early-college (MEC) principals' leadership styles, teacher motivation, and teacher satisfaction. MEC programs were programs designed to assist high school students who were not served well in a traditional setting (Middle…

The Software Line-up: What Reviewers Look for When Evaluating Software.

ERIC Educational Resources Information Center

ELECTRONIC Learning, 1982

1982-01-01

Contains a check list to aid teachers in evaluating software used in computer-assisted instruction on microcomputers. The evaluation form contains three sections: program description, program evaluation, and overall evaluation. A brief description of a software evaluation program in use at the Granite School District in Utah is included. (JJD)

Masters Curricula in Educational Communications and Technology: A Descriptive Directory. Third Edition.

ERIC Educational Resources Information Center

Johnson, Jenny K., Ed.

This directory of educational communications and technology masters programs contains descriptions of programs in both the United States and foreign countries. The U.S. listings are categorized by state. Data for each institution include an address and contact person; a listing of courses; information on prerequisites for entering the program;…

A debugger-interpreter with setup facilities for assembly programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dolinskii, I.S.; Zisel`man, I.M.; Belotskii, S.L.

1995-11-01

In this paper a software program allowing one to introduce and debug the descriptions of the von Nuemann architecture processors and their assemblers, efficiently debug assembly programs, and investigate the instruction sets of the described processors is considered. For a description of the processor sematics and assembler syntax, a metassembly language is suggested.

Innovations in Continuing Education. 1981 Award-Winning New Programs.

ERIC Educational Resources Information Center

National Univ. Continuing Education Association, Washington, DC.

Descriptions are provided of the six programs selected as award-winning innovations on the basis of universal application and potential for greatest impact for the improvement of continuing education. Each description contains this information: program name, name of principal person, name and institution to whom award would be made, source of…

Fund for the Improvement of Postsecondary Education Project Descriptions.

ERIC Educational Resources Information Center

Fund for the Improvement of Postsecondary Education (ED), Washington, DC.

Descriptions of 155 programs supported by the Fund for the Improvement of Postsecondary Education are provided. In addition to a brief statement of the scope of each program, the project director, address, and phone number are identified. Topics addressed by the programs include: ensuring adequate math preparation for college work through…

Critical Competitors. Evaluation of the Bay Area Writing Project. Technical Report.

ERIC Educational Resources Information Center

Thomas, Susan; Watson, Patti

Prepared as part of the evaluation of the Bay Area Writing Project (BAWP), this report compares BAWP to its "critical competitors" (other inservice teacher programs and programs for improving student writing). The BAWP model and ten other program descriptions are presented in identical descriptive formats. Three types of competitors are…

Fiscal Year 1999 At-a-Glance. Office of Justice Programs.

ERIC Educational Resources Information Center

Department of Justice, Washington, DC. Office of Justice Programs.

This publication provides brief descriptions of all the funding opportunities of the bureaus and offices of the Office of Justice Programs. Each description lists the amount of funding available, tells who can apply, and gives the status of program regulations, guidelines, reports, and application kits. The citations also contain the name of the…

Validation of a proposal for evaluating hospital infection control programs.

PubMed

Silva, Cristiane Pavanello Rodrigues; Lacerda, Rúbia Aparecida

2011-02-01

To validate the construct and discriminant properties of a hospital infection prevention and control program. The program consisted of four indicators: technical-operational structure; operational prevention and control guidelines; epidemiological surveillance system; and prevention and control activities. These indicators, with previously validated content, were applied to 50 healthcare institutions in the city of São Paulo, Southeastern Brazil, in 2009. Descriptive statistics were used to characterize the hospitals and indicator scores, and Cronbach's α coefficient was used to evaluate the internal consistency. The discriminant validity was analyzed by comparing indicator scores between groups of hospitals: with versus without quality certification. The construct validity analysis was based on exploratory factor analysis with a tetrachoric correlation matrix. The indicators for the technical-operational structure and epidemiological surveillance presented almost 100% conformity in the whole sample. The indicators for the operational prevention and control guidelines and the prevention and control activities presented internal consistency ranging from 0.67 to 0.80. The discriminant validity of these indicators indicated higher and statistically significant mean conformity scores among the group of institutions with healthcare certification or accreditation processes. In the construct validation, two dimensions were identified for the operational prevention and control guidelines: recommendations for preventing hospital infection and recommendations for standardizing prophylaxis procedures, with good correlation between the analysis units that formed the guidelines. The same was found for the prevention and control activities: interfaces with treatment units and support units were identified. Validation of the measurement properties of the hospital infection prevention and control program indicators made it possible to develop a tool for evaluating these programs in an ethical and scientific manner in order to obtain a quality diagnosis in this field.

AMPS data management requirements study. [user manuals (computer programs)/display devices - computerized simulation/experimentation/ionosphere

NASA Technical Reports Server (NTRS)

1975-01-01

A data simulation is presented for instruments and associated control and display functions required to perform controlled active experiments of the atmosphere. A comprehensive user's guide is given for the data requirements and software developed for the following experiments: (1) electromagnetic wave transmission; (2) passive observation of ambient plasmas; (3) ionospheric measurements with a subsatellite; (4) electron accelerator beam measurements; and (5) measurement of acoustic gravity waves in the sodium layer using lasers. A complete description of each experiment is given.

Skylab thruster attitude control system

NASA Technical Reports Server (NTRS)

Wilmer, G. E., Jr.

1974-01-01

Preflight activities and the Skylab mission support effort for the thruster attitude control system (TACS) are documented. The preflight activities include a description of problems and their solutions encountered in the development, qualification, and flight checkout test programs. Mission support effort is presented as it relates to system performance assessment, real-time problem solving, flight anomalies, and the daily system evaluation. Finally, the detailed flight evaluation is presented for each phase of the mission using system telemetry data. Data assert that the TACS met or exceeded design requirements and fulfilled its assigned mission objectives.

A computer-controlled instrumentation system for third octave analysis

NASA Technical Reports Server (NTRS)

Faulcon, N. D.; Monteith, J. H.

1978-01-01

An instrumentation system is described which employs a minicomputer, a one-third octave band analyzer, and a time code/tape search unit for the automatic control and analysis of third-octave data. With this system the information necessary for data adjustment is formatted in such a way as to eliminate much operator interface, thereby substantially reducing the probability for error. A description of a program for the calculation of effective perceived noise level from aircraft noise data is included as an example of how this system can be used.

The M68HC11 gripper controller software. Thesis

NASA Technical Reports Server (NTRS)

Tsai, Jodi Wei-Duk

1991-01-01

This thesis discusses the development of firmware for the 68HC11 gripper controller. A general description of the software and hardware interfaces is given. The C library interface for the gripper is then described and followed by a detailed discussion of the software architecture of the firmware. A procedure to assemble and download 68HC11 programs is presented in the form of a tutorial. The tools used to implement this environment are then described. Finally, the implementation of the configuration management scheme used to manage all CIRSSE software is presented.

GEMPAK: An arbitrary aircraft geometry generator

NASA Technical Reports Server (NTRS)

Stack, S. H.; Edwards, C. L. W.; Small, W. J.

1977-01-01

A computer program, GEMPAK, has been developed to aid in the generation of detailed configuration geometry. The program was written to allow the user as much flexibility as possible in his choices of configurations and the detail of description desired and at the same time keep input requirements and program turnaround and cost to a minimum. The program consists of routines that generate fuselage and planar-surface (winglike) geometry and a routine that will determine the true intersection of all components with the fuselage. This paper describes the methods by which the various geometries are generated and provides input description with sample input and output. Also included are descriptions of the primary program variables and functions performed by the various routines. The FORTRAN program GEMPAK has been used extensively in conjunction with interfaces to several aerodynamic and plotting computer programs and has proven to be an effective aid in the preliminary design phase of aircraft configurations.

POLLUX: a program for simulated cloning, mutagenesis and database searching of DNA constructs.

PubMed

Dayringer, H E; Sammons, S A

1991-04-01

Computer support for research in biotechnology has developed rapidly and has provided several tools to aid the researcher. This report describes the capabilities of new computer software developed in this laboratory to aid in the documentation and planning of experiments in molecular biology. The program, POLLUX, provides a graphical medium for the entry, edit and manipulation of DNA constructs and a textual format for display and edit of construct descriptive data. Program operation and procedures are designed to mimic the actual laboratory experiments with respect to capability and the order in which they are performed. Flexible control over the content of the computer-generated displays and program facilities is provided by a mouse-driven menu interface. Programmed facilities for mutagenesis, simulated cloning and searching of the database from networked workstations are described.

Recent progress and future direction of cancer epidemiological research in Japan.

PubMed

Sobue, Tomotaka

2015-06-01

In 2006, the Cancer Control Act was approved and a Basic Plan, to Promote the Cancer Control Program at the national level, was developed in 2007. Cancer research is recognized as a fundamental component to provide evidence in cancer control program. Cancer epidemiology plays central role in connecting research and policy, since it directly deals with data from humans. Research for cancer epidemiology in Japan made substantial progress, in the field of descriptive studies, cohort studies, intervention studies and activities for summarizing evidences. In future, promoting high-quality large-scale intervention studies, individual-level linkage studies, simulation models and studies for elderly population will be of great importance, but at the same time research should be promoted in well-balanced fashion not placing too much emphasis on one particular research field. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

An interactive modular design for computerized photometry in spectrochemical analysis

NASA Technical Reports Server (NTRS)

Bair, V. L.

1980-01-01

A general functional description of totally automatic photometry of emission spectra is not available for an operating environment in which the sample compositions and analysis procedures are low-volume and non-routine. The advantages of using an interactive approach to computer control in such an operating environment are demonstrated. This approach includes modular subroutines selected at multiple-option, menu-style decision points. This style of programming is used to trace elemental determinations, including the automated reading of spectrographic plates produced by a 3.4 m Ebert mount spectrograph using a dc-arc in an argon atmosphere. The simplified control logic and modular subroutine approach facilitates innovative research and program development, yet is easily adapted to routine tasks. Operator confidence and control are increased by the built-in options including degree of automation, amount of intermediate data printed out, amount of user prompting, and multidirectional decision points.

Development of a standardized control module for dc-to-dc converters

NASA Technical Reports Server (NTRS)

Yu, Y.; Iwens, R. I.; Lee, F. C.; Inouye, L. Y.

1977-01-01

The electrical performance of a power processor depends on the quality of its control system. Most of the existing control circuits suffer one or more of the following imperfections that tend to restrict their respective utility: (1) inability to perform different modes of duty cycle control; (2) lack of immunity to output filter parameter changes, and (3) lack of capability to provide power component stress limiting on an instantaneous basis. The three lagging aspects of existing control circuits have been used to define the major objectives of the current Standardized Control Module (SCM) Program. Detailed information on the SCM functional block diagram, its universality, and performance features, circuit description, test results, and modeling and analysis efforts are presented.

User's guide and description of the streamline divergence computer program. [turbulent convective heat transfer

NASA Technical Reports Server (NTRS)

Sulyma, P. R.; Mcanally, J. V.

1975-01-01

The streamline divergence program was developed to demonstrate the capability to trace inviscid surface streamlines and to calculate outflow-corrected laminar and turbulent convective heating rates on surfaces subjected to exhaust plume impingement. The analytical techniques used in formulating this program are discussed. A brief description of the streamline divergence program is given along with a user's guide. The program input and output for a sample case are also presented.

X: a case study of a Swedish neo-Nzi and his reintegration into Swedish society.

PubMed

Stern, Jessica Eve

2014-01-01

This article provides a case study of a Swedish neo-Nazi and the reintegration program being provided to him. During an extensive interview that took place over two days, he told a researcher that he was interested in having a violent adventure, and that he was drawn to Nazi symbols and history more than their creed. In comparison with ordinary crime, terrorist crime is quite rare, and access to detailed case studies is rarer still, making the development of a prospective risk-assessment instrument extremely difficult. Researchers' "thick descriptions" of their encounters with terrorists can help us to develop putative risk factors which can then be tested against controls. The article concludes by arguing that just as there is no single pathway into or out of terrorism, there can be no single reintegration program. A series of thick descriptions is a first step toward understanding what leads individuals into and out of terrorism. Copyright © 2014 John Wiley & Sons, Ltd.

Preparation of the Professional Athletic Trainer: A Descriptive Study of Undergraduate and Graduate Degree Programs.

PubMed

Cavallario, Julie M; Van Lunen, Bonnie L

2015-07-01

The examination of the appropriate professional degree for preparation as an athletic trainer is of interest to the profession. Descriptive information concerning universal outcomes is needed to understand the effect of a degree change. To obtain and compare descriptive information related to professional athletic training programs and a potential degree change and to determine if any of these factors contribute to success on existing universal outcome measures. Cross-sectional study. Web-based survey. We contacted 364 program directors; 178 (48.9%; 163 undergraduate, 15 postbaccalaureate) responded. The survey consisted of 46 questions: 45 questions that dealt with 5 themes (institutional demographics [n = 13], program admissions [n = 6], program outcomes [n = 10], program design [n = 9], faculty and staff [n = 7]) and 1 optional question. Descriptive statistics for all programs were calculated. We compared undergraduate and postbaccalaureate programs by examining universal outcome variables. Descriptive statistics demonstrated that 33 programs could not support postbaccalaureate degrees, and a substantial loss of faculty could occur if the degree requirement changed (553 graduate assistants, 642 potentially underqualified instructors). Postbaccalaureate professional programs had higher 2011-2012 first-time Board of Certification (BOC) passing rates (U = 464.5, P = .001), 3-year aggregate first-time BOC passing rates (U = 451.5, P = .001), and employment rates for 2011-2012 graduates employed within athletic training (U = 614.0, P = .01). Linear multiple-regression models demonstrated that program and institution type contributed to the variance of the first-time BOC passing rates and the 3-year aggregate first-time BOC passing rates (P < .05). Students in postbaccalaureate athletic training programs performed better in universal outcome measures. Our data supported the concerns that this transition could result in the loss of some programs and an additional immediate strain on current staff due to potential staffing changes and the loss of graduate assistant positions.

A descriptive evaluation of CDC's LEAN Works! Leading employees to activity and nutrition--a Web-based employer tool for workplace obesity management.

PubMed

Roemer, Enid C; Liss-Levinson, Rivka C; Samoly, Daniel K; Guy, Gery P; Tabrizi, Maryam J; Beckowski, Meghan S; Pei, Xiaofei; Goetzel, Ron Z

2013-01-01

The study aim was to determine the utility of and satisfaction with a Centers for Disease Control and Prevention (CDC) Web-based employer tool, CDC's LEAN Works!, which provides evidence-based recommendations and promising practices for obesity prevention and control at worksites. This study examined employers' natural usage (i.e., without any study parameters on how, when, or how much to use the Web site and its resources) and impressions of the Web site. Employers of varying sizes, industry types, and levels of maturity in offering obesity management programs and from both private and public sectors were recruited to participate in the study. A convenience sample of 29 employers enrolled to participate. Participants were followed over a 12-month period. First impressions, bimonthly use of the Web site, and final assessments were collected using self-report surveys and individual interviews. Descriptive analyses were conducted. Almost all (96%) of participants reported a positive experience with the Web site, noting it provided a wealth of information. Most reported they planned to continue to use the Web site to develop (77%), implement (92%), and evaluate (85%) their obesity management programs. Aspects of the Web site that employers found valuable included a step-by-step implementation process, templates and toolkits, specific recommendations, and promising practices. CDC's LEAN Works! is a useful resource for employers wishing to develop and implement evidence-based workplace obesity prevention programs.

Effects of supervised exercise on motivational outcomes in breast cancer survivors at 5-year follow-up.

PubMed

Trinh, Linda; Mutrie, Nanette; Campbell, Anna M; Crawford, Jennifer J; Courneya, Kerry S

2014-12-01

Short-term physical activity (PA) has beneficial effects on symptom management and quality of life, however, longer-term adherence is likely needed for improved disease outcomes in breast cancer survivors (BCS). This study examined the effects of a supervised group exercise program on motivational outcomes and PA among BCS at 5-year follow-up. The original study was a two-armed, randomized controlled trial comparing a 12-week supervised group exercise program to usual care among 203 BCS. BCS for this follow-up study were contacted at 60 months postintervention and asked to complete assessments of motivational outcomes from the Theory of Planned Behavior and PA behavior using the Scottish Physical Activity Questionnaire. Overall, 87 participants provided 5-year follow-up data with no differences in participation by group. Analyses of covariance (ANCOVAs) revealed that supervised exercise had a significant positive effect on descriptive norm at 5-year follow-up (mean = +0.6; 95% CI = +0.1 to +1.1; d = +0.48; p = 0.021). Small positive effects were also noted for perceived behavioral control (d = +0.18), instrumental attitude (d = +0.26), and injunctive norm (d = +0.35), although they were not statistically significant. Moreover, BCS who were more active at 5-year follow-up also reported more favorable perceived behavioral control (d = +0.16), instrumental attitude (d = +0.28), injunctive norm (d = +0.24), and descriptive norm (d = +0.31), although these differences were not statistically significant. This trial provides suggestive evidence that a supervised exercise program has positive effects on motivational outcomes even after 5 years. Additional intervention strategies during follow-up may further improve long-term adherence and health outcomes in BCS. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Roadmap for Aircraft Engine Life Extending Control

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei

2001-01-01

The concept of Aircraft Engine Life Extending Control is introduced. A brief description of the tradeoffs between performance and engine life are first explained. The overall goal of the life extending controller is to reduce the engine operating cost by extending the on-wing engine life while improving operational safety. The research results for NASA's Rocket Engine life extending control program are also briefly described. Major building blocks of the Engine Life Extending Control architecture are examined. These blocks include: life prediction models, engine operation models, stress and thermal analysis tools, control schemes, and intelligent control systems. The technology areas that would likely impact the successful implementation of an aircraft engine life extending control are also briefly described. Near, intermediate, and long term goals of NASA's activities are also presented.

An Incentive Program for Nurse Aides Implementation Report: Description and Evaluation. Illinois Long Term Care Research and Demonstration Projects Series. Final Report.

ERIC Educational Resources Information Center

Sinke, Mary

This study examined a nursing aide recognition program in a nursing home with 50 nurses and 200 nurse aides. Before the program was implemented, baseline data on job satisfaction were gathered with a questionnaire. A one-page description of the program and an evaluation tool were distributed to the nurse aides at their information sessions. Nurse…

Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

NASA Technical Reports Server (NTRS)

McBride, Bonnie J.; Gordon, Sanford

1996-01-01

This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

Multi-kw dc power distribution system study program

NASA Technical Reports Server (NTRS)

Berkery, E. A.; Krausz, A.

1974-01-01

The first phase of the Multi-kw dc Power Distribution Technology Program is reported and involves the test and evaluation of a technology breadboard in a specifically designed test facility according to design concepts developed in a previous study on space vehicle electrical power processing, distribution, and control. The static and dynamic performance, fault isolation, reliability, electromagnetic interference characterisitics, and operability factors of high distribution systems were studied in order to gain a technology base for the use of high voltage dc systems in future aerospace vehicles. Detailed technical descriptions are presented and include data for the following: (1) dynamic interactions due to operation of solid state and electromechanical switchgear; (2) multiplexed and computer controlled supervision and checkout methods; (3) pulse width modulator design; and (4) cable design factors.

The Efficacy of Multicultural Education Training in Teacher-Credentialing Programs: A Descriptive Case Study

ERIC Educational Resources Information Center

Delk, Tricia

2017-01-01

The purpose of the qualitative descriptive embedded single case study research was to explore how multicultural curriculum and instruction in a teacher-credentialing program prepared pre-service teachers to work with diverse students. The problem was the inadequacy on the part of teacher-credentialing programs to train pre-service teachers to make…

A Descriptive Study of Head Start Families: FACES Technical Report I.

ERIC Educational Resources Information Center

O'Brien, Robert W.; D'Elio, Mary Ann; Vaden-Kiernan, Michael; Magee, Candice; Younoszai, Tina; Keane, Michael J.; Connell, David C.; Hailey, Linda

Recognizing that families have played an essential role in the Head Start philosophy since the program's inception, the Head Start Family and Child Experiences Survey (FACES) is an effort to develop a descriptive profile of families participating in the Head Start program and services, as well as to develop, test, and refine Program Performance…

World Perspective Case Descriptions on Educational Programs for Adults: Chile.

ERIC Educational Resources Information Center

Donoso, Patricio; Gajardo, Marcela

This document contains two case studies of adult education programs in Chile. Both case studies begin with a "face sheet" on which is recorded basic information about the program and the description. The first case study, prepared by Patricio Donoso, reports on Centro El Canelo de Nos, an inservice center for educators who work with…

Program of Studies: Industrial Arts: Grades 7-12.

ERIC Educational Resources Information Center

Fairfax County Schools, VA.

The first part of the industrial arts curriculum guide provides brief descriptions of the program and course goals for grades K-12 and a one-page chart of program courses. Part 2 contains unit plans for grades 7-12 which provide unit descriptions, credit values, minimum class times, maximum students per class, prerequisites, and various unit…

AESOP: An interactive computer program for the design of linear quadratic regulators and Kalman filters

NASA Technical Reports Server (NTRS)

Lehtinen, B.; Geyser, L. C.

1984-01-01

AESOP is a computer program for use in designing feedback controls and state estimators for linear multivariable systems. AESOP is meant to be used in an interactive manner. Each design task that the program performs is assigned a "function" number. The user accesses these functions either (1) by inputting a list of desired function numbers or (2) by inputting a single function number. In the latter case the choice of the function will in general depend on the results obtained by the previously executed function. The most important of the AESOP functions are those that design,linear quadratic regulators and Kalman filters. The user interacts with the program when using these design functions by inputting design weighting parameters and by viewing graphic displays of designed system responses. Supporting functions are provided that obtain system transient and frequency responses, transfer functions, and covariance matrices. The program can also compute open-loop system information such as stability (eigenvalues), eigenvectors, controllability, and observability. The program is written in ANSI-66 FORTRAN for use on an IBM 3033 using TSS 370. Descriptions of all subroutines and results of two test cases are included in the appendixes.

DYAD: A Computer Program for the Analysis of Interpersonal Communication

ERIC Educational Resources Information Center

Fogel, Daniel S.

1978-01-01

A computer program which generates descriptions of conversational patterns of dyads based on sound-silence data is described. Input consists of talk/no-talk designations; output consists of descriptive matrices, histograms, and individual talk parameters. (Author/JKS)

Integrated propulsion technology demonstrator. Program plan

NASA Technical Reports Server (NTRS)

1994-01-01

NASA and Rockwell have embarked on a cooperative agreement to define, develop, fabricate, and operate an integrated propulsion technology demonstrator (IPTD) for the purpose of validating design, process, and technology improvements of launch vehicle propulsion systems. This program, a result of NRA8-11, Task Area 1 A, is jointly funded by both NASA and Rockwell and is sponsored by the Reusable Launch Vehicle office at NASA Marshall Space flight Center. This program plan provides to the joint NASA/Rockwell integrated propulsion technology demonstrator (IPTD) team a description of the activities within tasks / sub tasks and associated schedules required to successfully achieve program objectives. This document also defines the cost elements and manpower allocations for each sub task for purpose of program control. This plan is updated periodically by developing greater depth of direction for outyear tasks as the program matures. Updating is accomplished by adding revisions to existing pages or attaching page revisions to this plan. In either case, revisions will be identified by appropriate highlighting of the change, or specifying a revision page through the use of footnotes on the bottom right of each change page. Authorization for the change is provided by the principal investigators to maintain control of this program plan document and IPTD program activities.

A community-based health education analysis of an infectous disease control program in Nigeria.

PubMed

Adeyanju, O M

1987-01-01

This descriptive study utilized the strategy of primary health care in program development-especially a community-based health education intervention approach-in the control of guinea-worm in rural communities of Nigeria. Two closely related rural communities in two states served as target groups. Committee system approach, nominal group process, interview methods, audio-visual aids, and health care volunteer trainingship were the educational strategies employed in a control and experimental set up. The PRECEDE model was applied in the analysis. Results show a significant control action on guinea-worm infestation in the experimental community and a tremendous achievement in preventive health education interventions through organized community participation/involvement and ultimate self-reliance and individual responsibility. A positive increase in health knowledge and attitude examined through interview method, and observable changes in health behavior were noticed. Wells were provided, drinking water treated, while personal and community health promotion strategies were encouraged by all. The study has shown the effectiveness/efficacy of a community-based effort facilitated by a health educator.

Flowcharting with D-charts

NASA Technical Reports Server (NTRS)

Meyer, D.

1985-01-01

A D-Chart is a style of flowchart using control symbols highly appropriate to modern structured programming languages. The intent of a D-Chart is to provide a clear and concise one-for-one mapping of control symbols to high-level language constructs for purposes of design and documentation. The notation lends itself to both high-level and code-level algorithmic description. The various issues that may arise when representing, in D-Chart style, algorithms expressed in the more popular high-level languages are addressed. In particular, the peculiarities of mapping control constructs for Ada, PASCAL, FORTRAN 77, C, PL/I, Jovial J73, HAL/S, and Algol are discussed.

Flowcharting with D-charts

NASA Technical Reports Server (NTRS)

Meyer, D. D.

1985-01-01

A D-Chart is a style of flowchart using control symbols highly appropriate to modern structured programming languages. The intent of a D-Chart is to provide a clear and concise one-for-one mapping of control symbols to high-level language constructs for purposes of design and documentation. The notation lends itself to both high-level and code-level algorithmic description. The various issues that may arise when representing, in D-Chart style, algorithms expressed in the more popular high-level languages are addressed. In particular, the peculiarities of mapping control constructs for Ada, PASCAL, FORTRAN 77, C, PL/I, Joviai J73, HAL/S, and Algol are discussed.

Apollo experience report: Systems and flight procedures development

NASA Technical Reports Server (NTRS)

Kramer, P. C.

1973-01-01

This report describes the process of crew procedures development used in the Apollo Program. The two major categories, Systems Procedures and Flight Procedures, are defined, as are the forms of documentation required. A description is provided of the operation of the procedures change control process, which includes the roles of man-in-the-loop simulations and the Crew Procedures Change Board. Brief discussions of significant aspects of the attitude control, computer, electrical power, environmental control, and propulsion subsystems procedures development are presented. Flight procedures are subdivided by mission phase: launch and translunar injection, rendezvous, lunar descent and ascent, and entry. Procedures used for each mission phase are summarized.

Department of the Navy Acquisition and Capabilities Guidebook

DTIC Science & Technology

2012-05-01

Cost Estimates/Service Cost Position..................................... 5-1 5.1.2 Cost Analysis Requirements Description ( CARD ) 5-2 5.1.3...Description ( CARD ). 7. Satisfactory review of program health. 8. Concurrence with draft TDS, TES, and SEP. 9. Approval of full funding...Description ( CARD ) SECNAV M-5000.2 May 2012 5-3 Enclosure (1) A sound cost estimate is based on a well-defined program. The CARD is used

JPL control/structure interaction test bed real-time control computer architecture

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

1989-01-01

The Control/Structure Interaction Program is a technology development program for spacecraft that exhibit interactions between the control system and structural dynamics. The program objectives include development and verification of new design concepts - such as active structure - and new tools - such as combined structure and control optimization algorithm - and their verification in ground and possibly flight test. A focus mission spacecraft was designed based upon a space interferometer and is the basis for design of the ground test article. The ground test bed objectives include verification of the spacecraft design concepts, the active structure elements and certain design tools such as the new combined structures and controls optimization tool. In anticipation of CSI technology flight experiments, the test bed control electronics must emulate the computation capacity and control architectures of space qualifiable systems as well as the command and control networks that will be used to connect investigators with the flight experiment hardware. The Test Bed facility electronics were functionally partitioned into three units: a laboratory data acquisition system for structural parameter identification and performance verification; an experiment supervisory computer to oversee the experiment, monitor the environmental parameters and perform data logging; and a multilevel real-time control computing system. The design of the Test Bed electronics is presented along with hardware and software component descriptions. The system should break new ground in experimental control electronics and is of interest to anyone working in the verification of control concepts for large structures.

Manufacturing process applications team (MATEAM). [technology transfer in the areas of machine tools and robots

NASA Technical Reports Server (NTRS)

1979-01-01

The transfer of NASA technology to the industrial sector is reported. Presentations to the machine tool and robot industries and direct technology transfers of the Adams Manipulator arm, a-c motor control, and the bolt tension monitor are discussed. A listing of proposed RTOP programs with strong potential is included. A detailed description of the rotor technology available to industry is given.

Investigation of the Constitutive Model Used in Nonlinear, Incremental Structural Analyses.

DTIC Science & Technology

1998-06-01

package, ABAQUS , was chosen for performing NISA studies in part because user supplied subroutines could be used for constitutive relationships. After a...loading and the shrinkage and thermally induced strains determined from control specimens. The majority of creep tests are uniaxial compressive tests...Kennedy, and Perry (1970). Description of FE Model The tests were simulated using the finite element (FE) program ABAQUS and the aging viscoelastic

Insecticide Resistance Management

DTIC Science & Technology

2013-01-01

been a side effect of insect vector control programs since 1914, and insect disease vectors in over 45 countries are resistant to at least one...the CDC and WHO bioassays can be performed on various insects , the remainder of the guide will focus specifically on how to detect resistance in...mosquito vector populations. For a description of how to develop a bioassay for resistance testing in other groups of insects , refer to the following

Final system instrumentation design package for Decade 80 solar house

NASA Technical Reports Server (NTRS)

1978-01-01

The final configuration of the Decade 80 solar house to monitor and collect system performance data is presented. A review demonstrated by actual operation that the system and the data acquisition subsystem operated satisfactorily and installation of instrumentation was in accordance with the design. This design package is made up of (1) site and system description, (2) operating and control modes, and (3) instrumentation program (including sensor schematic).

Office of Workers’ Compensation Programs (OWCP). Data Codebook. Version 1.0

DTIC Science & Technology

1993-12-01

Section 4. OWCP Data Codebook 4.1 Codebook Description ........................... 5 4.2 Codebook Column WHading Defnitions ............... 5 4.3 Data...OWCP (EARLY-REF) First character: variable. It was originally used T = Test group case between 1987 and 1990 in a C = Control group case study done...Nondestructive testing 4255 Fuel distribution system mechanic 3707 Metalizing 4301 Miscellaneous pliable materials work 3708 Metal process working 4351

MIDAS, prototype Multivariate Interactive Digital Analysis System for large area earth resources surveys. Volume 1: System description

NASA Technical Reports Server (NTRS)

Christenson, D.; Gordon, M.; Kistler, R.; Kriegler, F.; Lampert, S.; Marshall, R.; Mclaughlin, R.

1977-01-01

A third-generation, fast, low cost, multispectral recognition system (MIDAS) able to keep pace with the large quantity and high rates of data acquisition from large regions with present and projected sensots is described. The program can process a complete ERTS frame in forty seconds and provide a color map of sixteen constituent categories in a few minutes. A principle objective of the MIDAS program is to provide a system well interfaced with the human operator and thus to obtain large overall reductions in turn-around time and significant gains in throughput. The hardware and software generated in the overall program is described. The system contains a midi-computer to control the various high speed processing elements in the data path, a preprocessor to condition data, and a classifier which implements an all digital prototype multivariate Gaussian maximum likelihood or a Bayesian decision algorithm. Sufficient software was developed to perform signature extraction, control the preprocessor, compute classifier coefficients, control the classifier operation, operate the color display and printer, and diagnose operation.

24 CFR 582.100 - Program component descriptions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES SHELTER PLUS CARE Assistance Provided § 582.100 Program component descriptions. (a) Tenant-based rental assistance (TRA). Tenant-based rental assistance provides...

Puerto Rico water resources planning model program description

USGS Publications Warehouse

Moody, D.W.; Maddock, Thomas; Karlinger, M.R.; Lloyd, J.J.

1973-01-01

Because the use of the Mathematical Programming System -Extended (MPSX) to solve large linear and mixed integer programs requires the preparation of many input data cards, a matrix generator program to produce the MPSX input data from a much more limited set of data may expedite the use of the mixed integer programming optimization technique. The Model Definition and Control Program (MODCQP) is intended to assist a planner in preparing MPSX input data for the Puerto Rico Water Resources Planning Model. The model utilizes a mixed-integer mathematical program to identify a minimum present cost set of water resources projects (diversions, reservoirs, ground-water fields, desalinization plants, water treatment plants, and inter-basin transfers of water) which will meet a set of future water demands and to determine their sequence of construction. While MODCOP was specifically written to generate MPSX input data for the planning model described in this report, the program can be easily modified to reflect changes in the model's mathematical structure.

Parent-child development center follow-up project: child behavior problem results.

PubMed

Johnson, Dale L

2006-07-01

The long-term effectiveness of the Parent-Child Development Centers (PCDCs) as programs to prevent behavior problems in children was examined with follow-up data collected 6-13 years after program completion. Data were collected for 581 children who had been in the programs with their mothers (Ns: Birmingham, 151; New Orleans, 186; Houston, 244). Mothers and teachers were interviewed. There were few significant differences between program and control groups. Only the early cohorts of the Houston program showed significant differences between groups on the Child Behavior Checklist (CBCL). EDITORS' STRATEGIC IMPLICATIONS: This is a rare example of long-term longitudinal evaluation of a cross-site prevention program with a large sample size. Practitioners and program designers will be interested in the author's descriptions of cohort and site implementation differences. The absence of major effects at follow-up (despite significant short-term effects) in this well-designed study must caution us against thinking of early prevention programs as inoculations.

NASA Ames potential flow analysis (POTFAN) geometry program (POTGEM), version 1

NASA Technical Reports Server (NTRS)

Medan, R. T.; Bullock, R. B.

1976-01-01

A computer program known as POTGEM is reported which has been developed as an independent segment of a three-dimensional linearized, potential flow analysis system and which is used to generate a panel point description of arbitrary, three-dimensional bodies from convenient engineering descriptions consisting of equations and/or tables. Due to the independent, modular nature of the program, it may be used to generate corner points for other computer programs.

The effect of a music therapy intergenerational program on children and older adults' intergenerational interactions, cross-age attitudes, and older adults' psychosocial well-being.

PubMed

Belgrave, Melita

2011-01-01

The purpose of this study was to examine the effect of participation in a music-based intergenerational music program on cross-age interactions and cross-age attitudes of elementary-age children and older adults, and older adults' psychosocial well-being. Twenty-one children in the 4th grade volunteered to participate in the experimental (n = 12) or control (n = 9) group. Twenty-six older adults from a retirement living facility also volunteered to participate in the experimental (n = 14) or control (n = 12) group. Ten 30-min music sessions occurred in which participants engaged in singing, structured conversation, moving to music, and instrument playing interventions. Data analysis of cross-age interactions revealed that the interventions "structured conversation" and "moving to music" were more effective in eliciting interaction behaviors than the interventions "singing" and "instrument playing." Standardized measures revealed that children's attitudes towards older adults improved, though not significantly so, after participation in the intergenerational program. Results of biweekly post-session questionnaires revealed a decrease in negative descriptions of older adults and an increase in positive descriptions of older adults--suggesting a more positive view towards aging. Results revealed that older adults' attitudes towards children improved significantly after their participation in the intergenerational program. While standardized measures revealed that older adults did not perceive a significant improvement in their psychosocial well-being, their bi-weekly post-session questionnaires showed they perceived increased feelings of usefulness and other personal benefits from the intergenerational interactions. Suggestions for future research, the utility of varied measurement instruments, and implications for practice are discussed.

Alternative Programs in Public Secondary Schools in Greater Cleveland: A Descriptive Study. [Summary Report; Detailed Study, Sections 1-9].

ERIC Educational Resources Information Center

Wertheim, Sally H.; And Others

The puposes of the study are: (1) to provide a description of alternative programs within public high schools, (2) to compile a written history of these programs, (3) to provide information necessary to compare innovations in alternative schools within and without public school systems, and (4) to collect and disseminate information about…

DMM: A MULTIGROUP, MULTIREGION ONE-SPACE-DIMENSIONAL COMPUTER PROGRAM USING NEUTRON DIFFUSION THEORY. PART II. DMM PROGRAM DESCRIPTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kavanagh, D.L.; Antchagno, M.J.; Egawa, E.K.

1960-12-31

Operating instructions are presented for DMM, a Remington Rand 1103A program using one-space-dimensional multigroup diffusion theory to calculate the reactivity or critical conditions and flux distribution of a multiregion reactor. Complete descriptions of the routines and problem input and output specifications are also included. (D.L.C.)

Environmental Justice Small Grants Program Project Descriptions for 2009

EPA Pesticide Factsheets

Project Descriptions for the 2009 award recipients of the Environmental Justice Small Grants Program which is designed to assist recipients in building collaborative partnerships that will help them understand and address the environmental and/or public health issues in their communities.

Program of Studies: Business Education: Grades 9-12.

ERIC Educational Resources Information Center

Fairfax County Schools, VA.

The first section of the business education curriculum guide for grades 9-12 provides brief statements concerning program descriptions, goals, course offerings, and objectives. Section 2 provides detailed descriptions and objectives for the following courses: accounting, advanced typewriting, bookkeeping, business economics, business information…

Environmental Justice Small Grants Program Project Descriptions for 2007

EPA Pesticide Factsheets

Project Descriptions for the 2007 award recipients of the Environmental Justice Small Grants Program which is designed to assist recipients in building collaborative partnerships that will help them understand and address the environmental and/or public health issues in their communities.

A thermal control approach for a solar electric propulsion thrust subsystem

NASA Technical Reports Server (NTRS)

Maloy, J. E.; Oglebay, J. C.

1979-01-01

A thrust subsystem thermal control design is defined for a Solar Electric Propulsion System (SEPS) proposed for the comet Halley Flyby/comet Tempel 2 rendezvous mission. A 114 node analytic model, developed and coded on the systems improved numerical differencing analyzer program, was employed. A description of the resulting thrust subsystem thermal design is presented as well as a description of the analytic model and comparisons of the predicted temperature profiles for various SEPS thermal configurations that were generated using this model. It was concluded that: (1) a BIMOD engine system thermal design can be autonomous; (2) an independent thrust subsystem thermal design is feasible; (3) the interface module electronics temperatures can be controlled by a passive radiator and supplementary heaters; (4) maintaining heat pipes above the freezing point would require an additional 322 watts of supplementary heating power for the situation where no thrusters are operating; (5) insulation is required around the power processors, and between the interface module and the avionics module, as well as in those areas which may be subjected to solar heating; and (6) insulation behind the heat pipe radiators is not necessary.

Standard Current Descriptions of State and Federal Student Financial Assistance Programs for Use by Postsecondary Institutions in Complying with Part 53 of the Regulations of the Commissioner of Education.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Office of Postsecondary Research, Information Systems, and Institutional Aid.

Descriptions of New York State and federal student financial aid programs as of November 1981 are presented for use by postsecondary institutions in compliance with part 53 of the Regulations of the Commissioner of Education. These descriptions may be used in the preparation of catalogs or bulletins and include information of application…

Needs and Problems of Posbindu Program: Community Health Volunteers Perspective

NASA Astrophysics Data System (ADS)

Putri, S. T.; Andriyani, S.

2018-01-01

Posbindu is a form of public participation to conduct early detection and monitoring of risk factors for non-communicable diseases(NCD), and where it was carried out in as an integrated manner, routine and periodic event. This paper aims to investigates the needs and problems on Posbindu Program based on community health volunteers(CHVs) perspective. This study used descriptive qualitative method by open ended questions. Content analysis using to explicating the result. There are 3 theme finding about elderly needs in Posbindu; medical care, support group community, and health education. We found four theme problems which in Posbindu program: low motivation from elderly, Inadequate of facilities, physical disability, failed communication. To be effective in Posbindu program, all the stakeholders have reached consensus on the Posbindu program as elderly need. CHVs need given wide knowledge about early detection, daily care, control disease continuously so that the elderly keep feeling the advantages of coming to the Posbindu.

Office of Adolescent Health medical accuracy review process--helping ensure the medical accuracy of Teen Pregnancy Prevention Program materials.

PubMed

Jensen, Jo Anne G; Moreno, Elizabeth L; Rice, Tara M

2014-03-01

The Office of Adolescent Health (OAH) developed a systematic approach to review for medical accuracy the educational materials proposed for use in Teen Pregnancy Prevention (TPP) programs. This process is also used by the Administration on Children, Youth, and Families (ACYF) for review of materials used in the Personal Responsibility Education Innovative Strategies (PREIS) Program. This article describes the review process, explaining the methodology, the team implementing the reviews, and the process for distributing review findings and implementing changes. Provided also is the definition of "medically accurate and complete" as used in the programs, and a description of what constitutes "complete" information when discussing sexually transmitted infections and birth control methods. The article is of interest to program providers, curriculum developers and purveyors, and those who are interested in providing medically accurate and complete information to adolescents. Published by Elsevier Inc.

A computer program to predict rotor rotational noise of a stationary rotor from blade loading coefficient

NASA Technical Reports Server (NTRS)

Ramakrishnan, R.; Randall, D.; Hosier, R. N.

1976-01-01

The programing language used is FORTRAN IV. A description of all main and subprograms is provided so that any user possessing a FORTRAN compiler and random access capability can adapt the program to his facility. Rotor blade surface-pressure spectra can be used by the program to calculate: (1) blade station loading spectra, (2) chordwise and/or spanwise integrated blade-loading spectra, and (3) far-field rotational noise spectra. Any of five standard inline functions describing the chordwise distribution of the blade loading can be chosen in order to study parametrically the acoustic predictions. The program output consists of both printed and graphic descriptions of the blade-loading coefficient spectra and far-field acoustic spectrum. The results may also be written on binary file for future processing. Examples of the application of the program along with a description of the rotational noise prediction theory on which the program is based are also provided.

Casualty Risk Assessment Controlled Re-Entry of EPS - Ariane 5ES - ATV Mission

NASA Astrophysics Data System (ADS)

Arnal, M.-H.; Laine, N.; Aussilhou, C.

2012-01-01

To fulfil its mission of compliance check to the French Space Operations Act, CNES has developed ELECTRA© tool in order to estimate casualty risk induced by a space activity (like rocket launch, controlled or un-controlled re-entry on Earth of a space object). This article describes the application of such a tool for the EPS controlled re-entry during the second Ariane 5E/S flight (Johannes Kepler mission has been launched in February 2011). EPS is the Ariane 5E/S upper composite which is de-orbited from a 260 km circular orbit after its main mission (release of the Automated Transfer Vehicle - ATV). After a brief description of the launcher, the ATV-mission and a description of all the failure cases taken into account in the mission design (which leads to "back-up scenarios" into the flight software program), the article will describe the steps which lead to the casualty risk assessment (in case of failure) with ELECTRA©. In particular, the presence on board of two propulsive means of de-orbiting (main engine of EPS, and 4 ACS longitudinal nozzles in case of main engine failure or exhaustion) leads to a low remaining casualty risk.

Staffing and structure of infection prevention and control programs.

PubMed

Stone, Patricia W; Dick, Andrew; Pogorzelska, Monika; Horan, Teresa C; Furuya, E Yoko; Larson, Elaine

2009-06-01

The nature of infection prevention and control is changing; however, little is known about current staffing and structure of infection prevention and control programs. Our objectives were to provide a snapshot of the staffing and structure of hospital-based infection prevention and control programs in the United States. A Web-based survey was sent to 441 hospitals that participate in the National Healthcare Safety Network. The response rate was 66% (n = 289); data were examined on 821 professionals. Infection preventionist (IP) staffing was significantly negatively related to bed size, with higher staffing in smaller hospitals (P < .001). Median staffing was 1 IP per 167 beds. Forty-seven percent of IPs were certified, and 24 percent had less than 2 years of experience. Most directors or hospital epidemiologists were reported to have authority to close beds for outbreaks always or most of the time (n = 225, 78%). Only 32% (n = 92) reported using an electronic surveillance system to track infections. This study is the first to provide a comprehensive description of current infection prevention and control staffing, organization, and support in a select group of hospitals across the nation. Further research is needed to identify effective staffing levels for various hospital types as well as examine how the IP role is changing over time.

Staffing and structure of infection prevention and control programs

PubMed Central

Stone, Patricia W.; Dick, Andrew; Pogorzelska, Monika; Horan, Teresa C.; Furuya, E. Yoko; Larson, Elaine

2009-01-01

Background The nature of infection prevention and control is changing; however, little is known about current staffing and structure of infection prevention and control programs. Methods Our objectives were to provide a snapshot of the staffing and structure of hospital-based infection prevention and control programs in the United States. A Web-based survey was sent to 441 hospitals that participate in the National Healthcare Safety Network. Results The response rate was 66% (n = 289); data were examined on 821 professionals. Infection preventionist (IP) staffing was significantly negatively related to bed size, with higher staffing in smaller hospitals (P < .001). Median staffing was 1 IP per 167 beds. Forty-seven percent of IPs were certified, and 24 percent had less than 2 years of experience. Most directors or hospital epidemiologists were reported to have authority to close beds for outbreaks always or most of the time (n = 225, 78%). Only 32% (n = 92) reported using an electronic surveillance system to track infections. Conclusion This study is the first to provide a comprehensive description of current infection prevention and control staffing, organization, and support in a select group of hospitals across the nation. Further research is needed to identify effective staffing levels for various hospital types as well as examine how the IP role is changing over time. PMID:19201510

Automated subsystems control development. [for life support systems of space station

NASA Technical Reports Server (NTRS)

Block, R. F.; Heppner, D. B.; Samonski, F. H., Jr.; Lance, N., Jr.

1985-01-01

NASA has the objective to launch a Space Station in the 1990s. It has been found that the success of the Space Station engineering development, the achievement of initial operational capability (IOC), and the operation of a productive Space Station will depend heavily on the implementation of an effective automation and control approach. For the development of technology needed to implement the required automation and control function, a contract entitled 'Automated Subsystems Control for Life Support Systems' (ASCLSS) was awarded to two American companies. The present paper provides a description of the ASCLSS program. Attention is given to an automation and control architecture study, a generic automation and control approach for hardware demonstration, a standard software approach, application of Air Revitalization Group (ARG) process simulators, and a generic man-machine interface.

National Center for Family Literacy, 1994.

ERIC Educational Resources Information Center

NCFL Newsletter, 1994

1994-01-01

These four newsletter issues provide information on family literacy and literacy education programs. Each 16-page issue includes several feature articles; descriptions of literacy conferences and seminars; updates on the National Family Literacy Project; descriptions of successful family literacy programs; coming events; a list of National Center…

Elementary Keyboarding Software Product Reports.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This report provides detailed product descriptions of 45 software programs designed to teach or improve the keyboarding skills of elementary school students that were identified by the MicroSIFT (Microcomputer Information and Software for Teachers) staff. The descriptions include program titles, producer names, costs, grade levels, hardware,…

1 CFR 20.4 - Description of program activities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS § 20.4...

Colleges or Universities with L.D. Programs.

ERIC Educational Resources Information Center

Association for Children and Adults with Learning Disabilities, Pittsburgh, PA.

The listing describes approximately 50 colleges and universities with programs for learning disabled (LD) students. Descriptions are arranged alphabetically by state and include the college's name, address, telephone number, name of contact person, and brief description. Among services listed are textbooks on cassette; academic, career, and…

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

PubMed

Colantonio, A

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subjects, setting, type of intervention, format), (b) evaluation design (research design, variables measured, operational methods), and (c) program outcomes. Results indicate numerous methodological and conceptual weaknesses and issues. These weaknesses included lack of controlled research designs and short time lags between pre- and post-test measures. Other problems identified are missing information regarding subjects, type of intervention, how variables are measured (operational methods), and reliability and validity of evaluation instruments. Due to the aforementioned weaknesses, positive outcomes could not be supported. Recommendations are made for future EAP evaluations.

Assessing the effects of employee assistance programs: a review of employee assistance program evaluations.

PubMed Central

Colantonio, A.

1989-01-01

Employee assistance programs have grown at a dramatic rate, yet the effectiveness of these programs has been called into question. The purpose of this paper was to assess the effectiveness of employee assistance programs (EAPs) by reviewing recently published EAP evaluations. All studies evaluating EAPs published since 1975 from peer-reviewed journals in the English language were included in this analysis. Each of the articles was assessed in the following areas: (a) program description (subjects, setting, type of intervention, format), (b) evaluation design (research design, variables measured, operational methods), and (c) program outcomes. Results indicate numerous methodological and conceptual weaknesses and issues. These weaknesses included lack of controlled research designs and short time lags between pre- and post-test measures. Other problems identified are missing information regarding subjects, type of intervention, how variables are measured (operational methods), and reliability and validity of evaluation instruments. Due to the aforementioned weaknesses, positive outcomes could not be supported. Recommendations are made for future EAP evaluations. PMID:2728498

STC-SAB program users manual for the turbulent boundary layer and turbulent separation prediction methods employed in the NASA Langley streamtube curvature computer program

NASA Technical Reports Server (NTRS)

Ferguson, D. R.

1972-01-01

The streamtube curvature program (STC) has been developed to predict the inviscid flow field and the pressure distribution about nacelles at transonic speeds. The effects of boundary layer are to displace the inviscid flow and effectively change the body shape. Thus, the body shape must be corrected by the displacement thickness in order to calculate the correct pressure distribution. This report describes the coupling of the Stratford and Beavers boundary layer solution with the inviscid STC analysis so that all nacelle pressure forces, friction drag, and incipient separation may be predicted. The usage of the coupled STC-SAB computer program is outlined and the program input and output are defined. Included in this manual are descriptions of the principal boundary layer tables and other revisions to the STC program. The use of the viscous option is controlled by the engineer during program input definition.

Computer program for plotting and fairing wind-tunnel data

NASA Technical Reports Server (NTRS)

Morgan, H. L., Jr.

1983-01-01

A detailed description of the Langley computer program PLOTWD which plots and fairs experimental wind-tunnel data is presented. The program was written for use primarily on the Langley CDC computer and CALCOMP plotters. The fundamental operating features of the program are that the input data are read and written to a random-access file for use during program execution, that the data for a selected run can be sorted and edited to delete duplicate points, and that the data can be plotted and faired using tension splines, least-squares polynomial, or least-squares cubic-spline curves. The most noteworthy feature of the program is the simplicity of the user-supplied input requirements. Several subroutines are also included that can be used to draw grid lines, zero lines, axis scale values and lables, and legends. A detailed description of the program operational features and each sub-program are presented. The general application of the program is also discussed together with the input and output for two typical plot types. A listing of the program code, user-guide, and output description are presented in appendices. The program has been in use at Langley for several years and has proven to be both easy to use and versatile.

Design of Training Systems, Phase II Report, Volume III; Model Program Descriptions and Operating Procedures. TAEG Report No. 12-2.

ERIC Educational Resources Information Center

Naval Training Equipment Center, Orlando, FL. Training Analysis and Evaluation Group.

The Design of Training Systems (DOTS) project was initiated by the Department of Defense (DOD) to develop tools for the effective management of military training organizations. Volume 3 contains the model and data base program descriptions and operating procedures designed for phase 2 of the project. Flow charts and program listings for the…

A program for the investigation of the Multibody Modeling, Verification, and Control Laboratory

NASA Technical Reports Server (NTRS)

Tobbe, Patrick A.; Christian, Paul M.; Rakoczy, John M.; Bulter, Marlon L.

1993-01-01

The Multibody Modeling, Verification, and Control (MMVC) Laboratory is under development at NASA MSFC in Huntsville, Alabama. The laboratory will provide a facility in which dynamic tests and analyses of multibody flexible structures representative of future space systems can be conducted. The purpose of the tests are to acquire dynamic measurements of the flexible structures undergoing large angle motions and use the data to validate the multibody modeling code, TREETOPS, developed under sponsorship of NASA. Advanced control systems design and system identification methodologies will also be implemented in the MMVC laboratory. This paper describes the ground test facility, the real-time control system, and the experiments. A top-level description of the TREETOPS code is also included along with the validation plan for the MMVC program. Dynamic test results from component testing are also presented and discussed. A detailed discussion of the test articles, which manifest the properties of large flexible space structures, is included along with a discussion of the various candidate control methodologies to be applied in the laboratory.

NASA Project Planning and Control Handbook

NASA Technical Reports Server (NTRS)

Moreland, Robert; Claunch, Cathy L.

2016-01-01

This handbook provides an overview of the fundamental principles and explains the functions and products that go into project planning and control. The 2010 Interim Results of the NASA Program Planning and Control (PPC) Study identified seven categories of activities for PPC, and those provide the basis for the seven functions described in this handbook. This handbook maps out the interfaces and interactions between PPC functions, as well as their external interfaces. This integration of information and products within and between functions is necessary to form the whole picture of how a project is progressing. The handbook descriptions are meant to facilitate consistent, common, and comprehensive approaches for providing valued analysis, assessment, and evaluation focused on the project level at NASA. The handbook also describes activities in terms of function rather than the job title or the specific person or organization responsible for the activity, which could differ by Center or size of a project. This handbook is primarily guidance for project planning and control: however, the same principles apply to programs and generally apply to institutional planning and control.

Optical Closed-Loop Propulsion Control System Development

NASA Technical Reports Server (NTRS)

Poppel, Gary L.

1998-01-01

The overall objective of this program was to design and fabricate the components required for optical closed-loop control of a F404-400 turbofan engine, by building on the experience of the NASA Fiber Optic Control System Integration (FOCSI) program. Evaluating the performance of fiber optic technology at the component and system levels will result in helping to validate its use on aircraft engines. This report includes descriptions of three test plans. The EOI Acceptance Test is designed to demonstrate satisfactory functionality of the EOI, primarily fail-safe throughput of the F404 sensor signals in the normal mode, and validation, switching, and output of the five analog sensor signals as generated from validated optical sensor inputs, in the optical mode. The EOI System Test is designed to demonstrate acceptable F404 ECU functionality as interfaced with the EOI, making use of a production ECU test stand. The Optical Control Engine Test Request describes planned hardware installation, optical signal calibrations, data system coordination, test procedures, and data signal comparisons for an engine test demonstration of the optical closed-loop control.

Crew appliance computer program manual, volume 1

NASA Technical Reports Server (NTRS)

Russell, D. J.

1975-01-01

Trade studies of numerous appliance concepts for advanced spacecraft galley, personal hygiene, housekeeping, and other areas were made to determine which best satisfy the space shuttle orbiter and modular space station mission requirements. Analytical models of selected appliance concepts not currently included in the G-189A Generalized Environmental/Thermal Control and Life Support Systems (ETCLSS) Computer Program subroutine library were developed. The new appliance subroutines are given along with complete analytical model descriptions, solution methods, user's input instructions, and validation run results. The appliance components modeled were integrated with G-189A ETCLSS models for shuttle orbiter and modular space station, and results from computer runs of these systems are presented.

GSFC Systems Test and Operation Language (STOL) functional requirements and language description

NASA Technical Reports Server (NTRS)

Desjardins, R.; Hall, G.; Mcguire, J.; Merwarth, P.; Mocarsky, W.; Truszkowski, W.; Villasenor, A.; Brosi, F.; Burch, P.; Carey, D.

1978-01-01

The Systems Tests and Operation Language (STOL) provides the means for user communication with payloads, applications programs, and other ground system elements. It is a systems operation language that enables an operator or user to communicate a command to a computer system. The system interprets each high level language directive from the user and performs the indicated action, such as executing a program, printing out a snapshot, or sending a payload command. This document presents the following: (1) required language features and implementation considerations; (2) basic capabilities; (3) telemetry, command, and input/output directives; (4) procedure definition and control; (5) listing, extension, and STOL nucleus capabilities.

The Effects of a Web-Based Nursing Process Documentation Program on Stress and Anxiety of Nursing Students in South Korea.

PubMed

Lee, Eunjoo; Noh, Hyun Kyung

2016-01-01

To examine the effects of a web-based nursing process documentation system on the stress and anxiety of nursing students during their clinical practice. A quasi-experimental design was employed. The experimental group (n = 110) used a web-based nursing process documentation program for their case reports as part of assignments for a clinical practicum, whereas the control group (n = 106) used traditional paper-based case reports. Stress and anxiety levels were measured with a numeric rating scale before, 2 weeks after, and 4 weeks after using the web-based nursing process documentation program during a clinical practicum. The data were analyzed using descriptive statistics, t tests, chi-square tests, and repeated-measures analyses of variance. Nursing students who used the web-based nursing process documentation program showed significant lower levels of stress and anxiety than the control group. A web-based nursing process documentation program could be used to reduce the stress and anxiety of nursing students during clinical practicum, which ultimately would benefit nursing students by increasing satisfaction with and effectiveness of clinical practicum. © 2015 NANDA International, Inc.

Space Shuttle

NASA Technical Reports Server (NTRS)

1975-01-01

A general description of the space shuttle program is presented, with emphasis on its application to the use of space for commercial, scientific, and defense needs. The following aspects of the program are discussed: description of the flight system (orbiter, external tank, solid rocket boosters) and mission profile, direct benefits related to life on earth (both present and expected), description of the space shuttle vehicle and its associated supporting systems, economic impacts (including indirect benefits such as lower inflation rates), listing of participating organizations.

Assuring reliability program effectiveness.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1973-01-01

An attempt is made to provide simple identification and description of techniques that have proved to be most useful either in developing a new product or in improving reliability of an established product. The first reliability task is obtaining and organizing parts failure rate data. Other tasks are parts screening, tabulation of general failure rates, preventive maintenance, prediction of new product reliability, and statistical demonstration of achieved reliability. Five principal tasks for improving reliability involve the physics of failure research, derating of internal stresses, control of external stresses, functional redundancy, and failure effects control. A final task is the training and motivation of reliability specialist engineers.

Astrobee: Space Station Robotic Free Flyer

NASA Technical Reports Server (NTRS)

Provencher, Chris; Bualat, Maria G.; Barlow, Jonathan; Fong, Terrence W.; Smith, Marion F.; Smith, Ernest E.; Sanchez, Hugo S.

2016-01-01

Astrobee is a free flying robot that will fly inside the International Space Station and primarily serve as a research platform for robotics in zero gravity. Astrobee will also provide mobile camera views to ISS flight and payload controllers, and collect various sensor data within the ISS environment for the ISS Program. Astrobee consists of two free flying robots, a dock, and ground data system. This presentation provides an overview, high level design description, and project status.

Math Description Engine Software Development Kit

NASA Technical Reports Server (NTRS)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Creativity; Quality Education Program Study. Booklet 7 (Description).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Seven of the Quality Education Program (regarding creativity) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

Career Education. Career Preparation and Career Development. K-12.

ERIC Educational Resources Information Center

Danbury Public Schools, CT.

The document presents information pertaining to the program in career education at the Danbury (Connecticut) public schools. The system's organizational chart and policy statement precede descriptions of the elementary, junior high, and senior high programs. Also included are descriptions of inservice teacher training activities, specialized…

Financial Analysis of the Northeast Corridor Development Project : Volume 2. Appendixes E Through I.

DOT National Transportation Integrated Search

1976-11-01

This appendix consists of two parts. The first part, Program Capability, contains a description of the capability of the program and is intended to bridge the gap between the descriptive material contained in Appendix D and the explanation of procedu...

Users' Manual for ILSS (Revised ILSLOC) : Simulation for Derogation Effects on the Instrument Landing System

DOT National Transportation Integrated Search

1976-12-01

The manual presents the complete ILSLOC computer program package. In addition to including a thorough description of the program itself and a commented listing, the manual contains a brief description of the ILS system and antenna patterns. To illust...

7 CFR 226.23 - Free and reduced-price meals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... other descriptive material distributed to such persons, shall contain only the family-size income levels... to these levels are eligible for free or reduced price meals. Such forms and descriptive materials... evaluate, fund, or determine benefits for their programs; auditors for program reviews; and law enforcement...

Minnesota Department of Education Agricultural Education Program Descriptions 01.0000-01.9095

ERIC Educational Resources Information Center

Minnesota Department of Education, 2004

2004-01-01

This document provides a brief compilation of descriptions of agricultural education programs linked to Career and Technical Education (CTE) initiative in Minnesota. Agriculture Exploration courses focus on the animal sciences, plant sciences, natural resource sciences, agricultural business and marketing, and leadership development. Agribusiness…

47 CFR 79.106 - Video description and emergency information accessibility requirements for recording devices.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Video description and emergency information... COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CLOSED CAPTIONING AND VIDEO DESCRIPTION OF VIDEO PROGRAMMING § 79.106 Video description and emergency information accessibility requirements for recording devices...

Streamlined design and self reliant hardware for active control of precision space structures

NASA Technical Reports Server (NTRS)

Hyland, David C.; King, James A.; Phillips, Douglas J.

1994-01-01

Precision space structures may require active vibration control to satisfy critical performance requirements relating to line-of-sight pointing accuracy and the maintenance of precise, internal alignments. In order for vibration control concepts to become operational, it is necessary that their benefits be practically demonstrated in large scale ground-based experiments. A unique opportunity to carry out such demonstrations on a wide variety of experimental testbeds was provided by the NASA Control-Structure Integration (CSI) Guest Investigator (GI) Program. This report surveys the experimental results achieved by the Harris Corporation GI team on both Phases 1 and 2 of the program and provides a detailed description of Phase 2 activities. The Phase 1 results illustrated the effectiveness of active vibration control for space structures and demonstrated a systematic methodology for control design, implementation test. In Phase 2, this methodology was significantly streamlined to yield an on-site, single session design/test capability. Moreover, the Phase 2 research on adaptive neural control techniques made significant progress toward fully automated, self-reliant space structure control systems. As a further thrust toward productized, self-contained vibration control systems, the Harris Phase II activity concluded with experimental demonstration of new vibration isolation hardware suitable for a wide range of space-flight and ground-based commercial applications.The CSI GI Program Phase 1 activity was conducted under contract NASA1-18872, and the Phase 2 activity was conducted under NASA1-19372.

The Tracking Study: Description of a randomized controlled trial of variations on weight tracking frequency in a behavioral weight loss program

PubMed Central

Linde, Jennifer A.; Jeffery, Robert W.; Crow, Scott J.; Brelje, Kerrin L.; Pacanowski, Carly R.; Gavin, Kara L.; Smolenski, Derek J.

2014-01-01

Observational evidence from behavioral weight control trials and community studies suggests that greater frequency of weighing oneself, or tracking weight, is associated with better weight outcomes. Conversely, it has also been suggested that frequent weight tracking may have a negative impact on mental health and outcomes during weight loss, but there are minimal experimental data that address this concern in the context of an active weight loss program. To achieve the long-term goal of strengthening behavioral weight loss programs, the purpose of this randomized controlled trial (the Tracking Study) is to test variations on frequency of self-weighing during a behavioral weight loss program, and to examine psychosocial and mental health correlates of weight tracking and weight loss outcomes. Three hundred thirty-nine overweight and obese adults were recruited and randomized to one of three variations on weight tracking frequency during a 12-month weight loss program with a 12-month follow-up: daily weight tracking, weekly weight tracking, or no weight tracking. The primary outcome is weight in kilograms at 24 months. The weight loss program integrates each weight tracking instruction with standard behavioral weight loss techniques (goal setting, self-monitoring, stimulus control, dietary and physical activity enhancements, lifestyle modifications); participants in weight tracking conditions were provided with wireless Internet technology (Wi-Fi-enabled digital scales and touchscreen personal devices) to facilitate weight tracking during the study. This paper describes the study design, intervention features, recruitment, and baseline characteristics of participants enrolled in the Tracking Study. PMID:25533727

Cellular automata with object-oriented features for parallel molecular network modeling.

PubMed

Zhu, Hao; Wu, Yinghui; Huang, Sui; Sun, Yan; Dhar, Pawan

2005-06-01

Cellular automata are an important modeling paradigm for studying the dynamics of large, parallel systems composed of multiple, interacting components. However, to model biological systems, cellular automata need to be extended beyond the large-scale parallelism and intensive communication in order to capture two fundamental properties characteristic of complex biological systems: hierarchy and heterogeneity. This paper proposes extensions to a cellular automata language, Cellang, to meet this purpose. The extended language, with object-oriented features, can be used to describe the structure and activity of parallel molecular networks within cells. Capabilities of this new programming language include object structure to define molecular programs within a cell, floating-point data type and mathematical functions to perform quantitative computation, message passing capability to describe molecular interactions, as well as new operators, statements, and built-in functions. We discuss relevant programming issues of these features, including the object-oriented description of molecular interactions with molecule encapsulation, message passing, and the description of heterogeneity and anisotropy at the cell and molecule levels. By enabling the integration of modeling at the molecular level with system behavior at cell, tissue, organ, or even organism levels, the program will help improve our understanding of how complex and dynamic biological activities are generated and controlled by parallel functioning of molecular networks. Index Terms-Cellular automata, modeling, molecular network, object-oriented.

[Development and effectiveness of a drug dosage calculation training program using cognitive loading theory based on smartphone application].

PubMed

Kim, Myoung Soo; Park, Jung Ha; Park, Kyung Yeon

2012-10-01

This study was done to develop and evaluate a drug dosage calculation training program using cognitive loading theory based on a smartphone application. Calculation ability, dosage calculation related self-efficacy and anxiety were measured. A nonequivalent control group design was used. Smartphone application and a handout for self-study were developed and administered to the experimental group and only a handout was provided for control group. Intervention period was 4 weeks. Data were analyzed using descriptive analysis, χ²-test, t-test, and ANCOVA with the SPSS 18.0. The experimental group showed more 'self-efficacy for drug dosage calculation' than the control group (t=3.82, p<.001). Experimental group students had higher ability to perform drug dosage calculations than control group students (t=3.98, p<.001), with regard to 'metric conversion' (t=2.25, p=.027), 'table dosage calculation' (t=2.20, p=.031) and 'drop rate calculation' (t=4.60, p<.001). There was no difference in improvement in 'anxiety for drug dosage calculation'. Mean satisfaction score for the program was 86.1. These results indicate that this drug dosage calculation training program using smartphone application is effective in improving dosage calculation related self-efficacy and calculation ability. Further study should be done to develop additional interventions for reducing anxiety.

A review of pediatric dentistry program websites: what are applicants learning about our programs?

PubMed

Lin, Jenn-Yih; Lee, Jung; Davidson, Bo; Farquharson, Kara; Shaul, Cheryl; Kim, Sara

2010-06-01

The purpose of this study was twofold: 1) to examine website content provided by U.S. and Canadian pediatric dentistry residency programs, and 2) to understand aspects of program websites that dental students report to be related to their interests. Sixty-eight program websites were reviewed by five interprofessional evaluators. A thirty-six-item evaluation form was organized into 1) program descriptive items listed on the American Academy of Pediatric Dentistry (AAPD) website (n=21); 2) additional program descriptive items not listed on the AAPD website but of interest (n=9); and 3) items related to website interface design (n=5). We also surveyed fifty-four dental students regarding their interest in various aspects of program descriptions. The results of this study suggest that pediatric dentistry residency programs in general tend to provide identical or less information than what is listed on the AAPD website. The majority of respondents (76 percent) reported that residency program websites would be their first source of information about advanced programs. The greatest gap between the available website information and students' interests exists in these areas: stipend and tuition information, state licensure, and program strengths. Pediatric dentistry residency programs underutilize websites as a marketing and recruitment tool and should incorporate more information in areas of students' priority interests.

Variational Trajectory Optimization Tool Set: Technical description and user's manual

NASA Technical Reports Server (NTRS)

Bless, Robert R.; Queen, Eric M.; Cavanaugh, Michael D.; Wetzel, Todd A.; Moerder, Daniel D.

1993-01-01

The algorithms that comprise the Variational Trajectory Optimization Tool Set (VTOTS) package are briefly described. The VTOTS is a software package for solving nonlinear constrained optimal control problems from a wide range of engineering and scientific disciplines. The VTOTS package was specifically designed to minimize the amount of user programming; in fact, for problems that may be expressed in terms of analytical functions, the user needs only to define the problem in terms of symbolic variables. This version of the VTOTS does not support tabular data; thus, problems must be expressed in terms of analytical functions. The VTOTS package consists of two methods for solving nonlinear optimal control problems: a time-domain finite-element algorithm and a multiple shooting algorithm. These two algorithms, under the VTOTS package, may be run independently or jointly. The finite-element algorithm generates approximate solutions, whereas the shooting algorithm provides a more accurate solution to the optimization problem. A user's manual, some examples with results, and a brief description of the individual subroutines are included.

A spaceborne receiver for measuring electromagnetic field intensity

NASA Technical Reports Server (NTRS)

Reich, B. W.; Van Dusen, M. R.; Habib, E. J.

1973-01-01

Description of a very accurately controlled receiver for monitoring the electromagnetic radiations in both existing and projected space communication bands. Based on analysis of the existing and projected space communication bands, 108 to 174 MHz, 240 to 478 MHz, and 1535 to 1665 MHz were covered. The receiver achieves accurate control via a digitally tuned synthesizer and a wide range of digital control including frequency band coverage and gain control selection. Digital memory was provided to store 16 separate digital command instructions which can be programmed via a command data link. The receiver provides for transmission to the ground of both a predetection signal and signals in digital format, which in turn, were provided by sampling and analog-to-digital conversions.

47 CFR 79.105 - Video description and emergency information accessibility requirements for all apparatus.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Video description and emergency information... COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CLOSED CAPTIONING AND VIDEO DESCRIPTION OF VIDEO PROGRAMMING § 79.105 Video description and emergency information accessibility requirements for all apparatus. (a...

Computer Program (HEVSIM) for Heavy Duty Vehicle Fuel Economy and Performance Simulation. Volume I: Description and Analysis

DOT National Transportation Integrated Search

1981-09-01

This report presents a description of a vehicle simulation program, which can determine the fuel economy and performance of a specified motor vehicle over a defined route as it executes a given driving schedule. Vehicle input accommodated by HEVSIM i...

Vocational Development: Quality Education Program Study. Booklet 8 (Description).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Eight of the Quality Education Program (regarding vocational development) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

The International Approach: Learning English through Content Area Study.

ERIC Educational Resources Information Center

LaGuardia Community Coll., Long Island City, NY. International High School.

Descriptive material about LaGuardia Community College International High School's program teaching English to limited-English-speaking students through content area instruction includes descriptions of individual program elements and courses. Two courses in the integrated learning center--a course on orientation to school and society, and a…

Blade loss transient dynamics analysis. Volume 3: User's manual for TETRA program

NASA Technical Reports Server (NTRS)

Black, G. R.; Gallardo, V. C.; Storace, A. S.; Sagendorph, F.

1981-01-01

The users manual for TETRA contains program logic, flow charts, error messages, input sheets, modeling instructions, option descriptions, input variable descriptions, and demonstration problems. The process of obtaining a NASTRAN 17.5 generated modal input file for TETRA is also described with a worked sample.

User's manual for ILSLOC : simulation for derogation effects on the localizer portion of the Instrument Landing System

DOT National Transportation Integrated Search

1973-08-01

The manual presents the complete ILSLOC computer program package. In addition to including a thorough description of the program itself and a commented listing, the manual contains a brief description of the ILS system and antenna patterns. To illust...

Center for Early Adolescence Studies Adolescent Literacy.

ERIC Educational Resources Information Center

Koppenhave, David; Jacoby, Monica, Ed.

1986-01-01

The extent and impact of adolescent illiteracy, brief descriptions of several successful programs designed to combat adolescent illiteracy, and a more detailed description of one of those programs are included in this collection of articles. The first article argues that while experts may disagree about the numbers of illiterate adolescents and…

8 CFR 245a.30 - Description of program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Description of program. 245a.30 Section 245a.30 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF... OF THE IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30...

8 CFR 245a.30 - Description of program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Description of program. 245a.30 Section 245a.30 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS ADJUSTMENT OF... OF THE IMMIGRATION AND NATIONALITY ACT LIFE Act Amendments Family Unity Provisions § 245a.30...

A computer program (VEHSIM) for vehicle fuel economy and performance simulation (automobiles and light trucks). Volume 1. Description and analysis

DOT National Transportation Integrated Search

1981-01-01

This report presents an updated description of a vehicle simulation program, VEHSIM, which can determine the fuel economy and performance of a specified vehicle over a defined route as it executes a given driving schedule. Vehicle input accommodated ...

A computer program (HEVSIM) for heavy duty vehicle fuel economy and performance simulation : Volume 1: Description and Analysis

DOT National Transportation Integrated Search

1981-09-01

This report presents a description of a vehicle simulation program, which can determine the fuel economy and performance of a specified motor vehicle over a defined route as it executes a given driving schedule. Vehicle input accommodated by HEVSIM i...

Computer Program (VEHSIM) for Vehicle Fuel Economy and Performance Simulation (Automobiles and Light Trucks) : Vol. I: Description and Analysis

DOT National Transportation Integrated Search

1981-10-01

This report presents an updated description of a vehicle simulation program, VEHSIM, which can determine the fuel economy and performance of a specified vehicle over a defined route as it executes a given driving schedule. Vehicle input accommodated ...

47 CFR 79.105 - Video description and emergency information accessibility requirements for all apparatus.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Video description and emergency information... COMMISSION (CONTINUED) BROADCAST RADIO SERVICES ACCESSIBILITY OF VIDEO PROGRAMMING Apparatus § 79.105 Video..., all apparatus that is designed to receive or play back video programming transmitted simultaneously...

47 CFR 79.106 - Video description and emergency information accessibility requirements for recording devices.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Video description and emergency information... COMMISSION (CONTINUED) BROADCAST RADIO SERVICES ACCESSIBILITY OF VIDEO PROGRAMMING Apparatus § 79.106 Video..., 2015, all apparatus that is designed to record video programming transmitted simultaneously with sound...

Functional Description of Air Traffic Control

DOT National Transportation Integrated Search

1971-04-01

The document contains a description of air traffic control in terms of generic operational functions. The functions are grouped by flight phase and by major system function (navigation, surveillance, control and communication). More detailed descript...

DIVWAG Model Documentation. Volume II. Programmer/Analyst Manual. Part 4.

DTIC Science & Technology

1976-07-01

Model Constant Data Deck Structure . .. .... IV-13-A-40 Appendix B. Movement Model Program Descriptions . .. .. . .IV-13-B-1 1. Introduction...Data ................ IV-15-A-17 11. Airmobile Constant Data Deck Structure .. ...... .. IV-15-A-30 Appendix B. Airmobile Model Program Descriptions...Make no changes. 12. AIRMOBILE CONSTANT DATA DECK STRUCTURE . The deck structure required by the Airmobile Model constant data load program and the data