Seizing Workplace Learning Affordances in High-Pressure Work Environments

ERIC Educational Resources Information Center

Gnaur, Dorina

2010-01-01

Work in call centres is often presented as a form of unskilled labour characterized by routinization, technological surveillance and tight management control aimed at reaching intensive performance targets. Beyond delivering business objectives, this control and efficiency strategy is often held to produce counterproductive effects with regard to…

LDR system concepts and technology

NASA Technical Reports Server (NTRS)

Pittman, B.

1985-01-01

The Large Deployable Reflector is a 20 meter diameter infrared/submillimeter telescope planned for the late 1990's. The Astronomy Survey Committee of the National Academy of Sciences (Field Committee) recommended LDR as one of the two space based observatories that should start development in the 80's. LDR's large aperture will give it unequaled resolution in the wavelength range from 30 to 1000 microns. To meet LDR performance goals will call for advances in several technology disciplines including: optics, controls, thermal control, detectors, cryogenic cooling, and large space structures.

The virtual environment display system

NASA Technical Reports Server (NTRS)

Mcgreevy, Michael W.

1991-01-01

Virtual environment technology is a display and control technology that can surround a person in an interactive computer generated or computer mediated virtual environment. It has evolved at NASA-Ames since 1984 to serve NASA's missions and goals. The exciting potential of this technology, sometimes called Virtual Reality, Artificial Reality, or Cyberspace, has been recognized recently by the popular media, industry, academia, and government organizations. Much research and development will be necessary to bring it to fruition.

Simulation of proportional control of hydraulic actuator using digital hydraulic valves

NASA Astrophysics Data System (ADS)

Raghuraman, D. R. S.; Senthil Kumar, S.; Kalaiarasan, G.

2017-11-01

Fluid power systems using oil hydraulics in earth moving and construction equipment have been using proportional and servo control valves for a long time to achieve precise and accurate position control backed by system performance. Such valves are having feedback control in them and exhibit good response, sensitivity and fine control of the actuators. Servo valves and proportional valves are possessing less hysteresis when compared to on-off type valves, but when the servo valve spools get stuck in one position, a high frequency called as jitter is employed to bring the spool back, whereas in on-off type valves it requires lesser technology to retract the spool. Hence on-off type valves are used in a technology known as digital valve technology, which caters to precise control on slow moving loads with fast switching times and with good flow and pressure control mimicking the performance of an equivalent “proportional valve” or “servo valve”.

Controlling urban air pollution caused by households: uncertainty, prices, and income.

PubMed

Chávez, Carlos A; Stranlund, John K; Gómez, Walter

2011-10-01

We examine the control of air pollution caused by households burning wood for heating and cooking in the developing world. Since the problem is one of controlling emissions from nonpoint sources, regulations are likely to be directed at household choices of wood consumption and combustion technologies. Moreover, these choices are subtractions from, or contributions to, the pure public good of air quality. Consequently, the efficient policy design is not independent of the distribution of household income. Since it is unrealistic to assume that environmental authorities can make lump sum income transfers part of control policies, efficient control of air pollution caused by wood consumption entails a higher tax on wood consumption and a higher subsidy for more efficient combustion technologies for higher income households. Among other difficulties, implementing a policy to promote the adoption of cleaner combustion technologies must overcome the seemingly paradoxical result that efficient control calls for higher technology subsidies for higher income households. Copyright © 2011 Elsevier Ltd. All rights reserved.

Technology innovations and experience curves for nitrogen oxides control technologies.

PubMed

Yeh, Sonia; Rubin, Edward S; Taylor, Margaret R; Hounshell, David A

2005-12-01

This paper reviews the regulatory history for nitrogen oxides (NOx) pollutant emissions from stationary sources, primarily in coal-fired power plants. Nitrogen dioxide (NO2) is one of the six criteria pollutants regulated by the 1970 Clean Air Act where National Ambient Air Quality Standards were established to protect public health and welfare. We use patent data to show that in the cases of Japan, Germany, and the United States, innovations in NOx control technologies did not occur until stringent government regulations were in place, thus "forcing" innovation. We also demonstrate that reductions in the capital and operation and maintenance (O&M) costs of new generations of high-efficiency NOx control technologies, selective catalytic reduction (SCR), are consistently associated with the increasing adoption of the control technology: the so-called learning-by-doing phenomena. The results show that as cumulative world coal-fired SCR capacity doubles, capital costs decline to approximately 86% and O&M costs to 58% of their original values. The observed changes in SCR technology reflect the impact of technological advance as well as other factors, such as market competition and economies of scale.

Program Formats, Vehicles, and Characters for Junior High School Audiences. Satellite Technology Demonstration, Technical Report No. 0509.

ERIC Educational Resources Information Center

Connolly, A. J.; Lonsdale, Helen C.

The "Time Out" series designed by the Satellite Technology Demonstration (STD) used a variety of formats, vehicles, and characters to explain career concepts to junior high school students. A science fiction set with a futuristic approach, called the Time Control Center (TCC) used vehicles to move forward and backward in time to access a…

Foam core shield (FCS) systems : a new dual - purpose technology for shielding against meteoroid strike damage and for thermal control of spacecrafts/satellite components

NASA Technical Reports Server (NTRS)

Adams, Marc A.; Zwissler, James G.; Hayes, Charles; Fabensky, Beth; Cornelison, Charles; Alexander, Lesley; Bishop, Karen

2005-01-01

A new technology is being developed that can protect spacecraft and satellite components against damage from meteoroid strikes and control the thermal environment of the protected components. This technology, called Foam Core Shield (FCS) systems, has the potential to replace the multi-layer insulation blankets (MLI) that have been used on spacecraft for decades. In order to be an attractive candidate for replacing MLI, FCS systems should not only provide superior protection against meteoroid strikes but also provide an equal or superior ability to control the temperature of the protected component. Properly designed FCS systems can provide these principal functions, meteoroid strike protection and thermal control, with lower system mass and a smaller system envelope than ML.

Verbal and Non-Verbal Communication and Coordination in Mission Control

NASA Technical Reports Server (NTRS)

Vinkhuyzen, Erik; Norvig, Peter (Technical Monitor)

1998-01-01

In this talk I will present some video-materials gathered in Mission Control during simulations. The focus of the presentation will be on verbal and non-verbal communication between the officers in the front and backroom, especially the practices that have evolved around a peculiar communications technology called voice loops.

U.S. Initiatives to Promote Global Internet Freedom: Issues, Policy, and Technology

DTIC Science & Technology

2010-03-17

video sharing sites, and other tools of today’s communications technology has proven to be an unprecedented and often disruptive force in some closed...using newer tools, such as blogs, social networks, video sharing sites, and other aspects of today’s communications technology to express their...Iranians sent VOA over 300 videos a day, along with thousands of still pictures, e-mails, and telephone calls to the agency.2 A variety of control

EPA's control technology approach to assisting states and regions with air toxics problems: Five case studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nolen, S.L.; Dimmick, W.F.

1990-10-01

The Environmental Protection Agency (EPA) announced in June 1985 a new strategy to reduce public exposure to toxic air pollutants in the ambient air. Over the next 5-8 years, the strategy called for State and Local authorities to take on more of the lead regulatory role, with the Agency providing technical and financial assistance to their efforts. The shift in emphasis and responsibility from the Federal level to State and Local air toxics programs and the need to transfer expertise from the Federal level to the appropriate State or Local level prompted EPA's Office of Research and Development (ORD) andmore » EPA's Office of Air Quality Planning and Standards (OAQPS) to develop and implement an innovative technical assistance program. This program is called the Control Technology Center (CTC). It has since been expanded to include technical assistance in the area of control of air toxics, particulate matter, and volatile organic compounds (VOCs); emission measurements; and other areas where expertise is available to ORD and OAQPS. During the CTC's first year of operation, operating guidelines were developed and three categories of technical assistance were established. These categories are telephone HOTLINE calls, direct engineering assistance, and technical guidance projects. The CTC HOTLINE is a special telephone number which State and Local Agencies can call for easy access to EPA personnel who can provide prompt assistance in a variety of ways including discussions, references to pertinent literature, and referrals to other EPA personnel. In some cases, a HOTLINE call will require more in-depth engineering analysis indicating a need for direct engineering assistance.« less

Perspectives of 30 English Patients on Call Light Technology, Eloquence Revisited.

PubMed

Montie, Mary; Shuman, Clayton; Galinato, Jose; Patak, Lance; Titler, Marita

2018-01-01

Call light technology is important because it serves as a direct link for patients to get their healthcare needs fulfilled by their healthcare providers. As primary users of call light technology, patient perspectives are important and warranted. Despite this fact, there is a lack of published literature regarding patient perspectives and call light technology. The present study examined a technologically advanced call light system (Eloquence) by incorporating 30 patient participants' perspectives regarding its usefulness, effectiveness, and appropriateness gathered from individual interviews. Using qualitative descriptive research methods, five major themes and multiple minor themes emerged from the data.

KSC-2011-3958

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex is a remote controlled or autonomous excavator, called a lunabot. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-3959

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex is a remote controlled or autonomous excavator, called a lunabot. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

An aeroelastician's perspective of wind tunnel and flight experiences with active control of structural response and stability

NASA Technical Reports Server (NTRS)

Hanson, P. W.

1984-01-01

Active controls technology is assessed based on a review of most of the wind-tunnel and flight tests and actual applications of active control concepts since the late sixties. The distinction is made between so-called ""rigid-body'' active control functions and those that involve significant modification of structural elastic response or stability. Both areas are reviewed although the focus is on the latter area. The basic goals and major results of the various studies or applications are summarized, and the anticipated use of active controls on current and near-future research and demonstration aircraft is discussed. Some of the ""holes'' remaining in the feasbility/benefits demonstration of active controls technology are examined.

Basics of Control: The Mechanical, Hydraulic, and Pneumatic Transfer of Power and Motion. Project Description, Teacher's Manual, and Student Manual.

ERIC Educational Resources Information Center

Collict, George

In 1990, the New Jersey Department of Education awarded the Randolph Township Board of Education a grant to evaluate the effectiveness of an existing technology learning activity called the "Magic Box", as part of the Teacher Developed Technology Education for the Nineties grant project. This document is comprised of three publications:…

LOW-CONCENTRATION NOX EMISSIONS MEASUREMENT

EPA Science Inventory

The paper gives results of a recent series of low-concentration nitrogen oxides (NOx) emission measurements, made by Midwest Research Institute (MRI) during U.S. EPA-sponsored Environmental Technology Verification (ETV) test of a NOx control system called Xonon (TM) Cool Combust...

Diversity and Control of Spoilage Fungi in Dairy Products: An Update

PubMed Central

Valence, Florence; Mounier, Jérôme

2017-01-01

Fungi are common contaminants of dairy products, which provide a favorable niche for their growth. They are responsible for visible or non-visible defects, such as off-odor and -flavor, and lead to significant food waste and losses as well as important economic losses. Control of fungal spoilage is a major concern for industrials and scientists that are looking for efficient solutions to prevent and/or limit fungal spoilage in dairy products. Several traditional methods also called traditional hurdle technologies are implemented and combined to prevent and control such contaminations. Prevention methods include good manufacturing and hygiene practices, air filtration, and decontamination systems, while control methods include inactivation treatments, temperature control, and modified atmosphere packaging. However, despite technology advances in existing preservation methods, fungal spoilage is still an issue for dairy manufacturers and in recent years, new (bio) preservation technologies are being developed such as the use of bioprotective cultures. This review summarizes our current knowledge on the diversity of spoilage fungi in dairy products and the traditional and (potentially) new hurdle technologies to control their occurrence in dairy foods. PMID:28788096

JPRS Report, Science & Technology, USSR: Science & Technology Policy.

DTIC Science & Technology

1987-07-15

called for by the specifications. We pointed this out, tut the suppliers were in no hurry to correct the situation," shop foreman S . Korenev ... S &T Progress ( S . Leznov; TEKHNIKA I NAUKA,No 9, Sep 86) 10 Work of ESSR S &T Societies on Intensifying Social Production (Vladimir...Moscow Automated Control System ( S . Ye. Serdyuk; TEKHNIKA I NAUKA, No 9, Sep 86) 41 INDUSTRIAL, COMMERCIAL APPLICATION Development of Methods

A call center primer.

PubMed

Durr, W

1998-01-01

Call centers are strategically and tactically important to many industries, including the healthcare industry. Call centers play a key role in acquiring and retaining customers. The ability to deliver high-quality and timely customer service without much expense is the basis for the proliferation and expansion of call centers. Call centers are unique blends of people and technology, where performance indicates combining appropriate technology tools with sound management practices built on key operational data. While the technology is fascinating, the people working in call centers and the skill of the management team ultimately make a difference to their companies.

A Review of Technology Choice for Teaching Language Skills and Areas in the CALL Literature

ERIC Educational Resources Information Center

Stockwell, Glenn

2007-01-01

The use of technology in language teaching and learning has been the focus of a number of recent research review studies, including developments in technology and CALL research (Zhao, 2003), CALL as an academic discipline (Debski, 2003), ICT effectiveness (Felix, 2005), and subject characteristics in CALL research (Hubbard, 2005), to name a few.…

New Technologies and Telephone Hotlines.

ERIC Educational Resources Information Center

Berman, Alan L., Ed.

1991-01-01

Identifies telephone technologies that may affect hotline services: Caller Identification, which displays number of in-coming call; Call Block, which prevents connection of calls from specified numbers; and Call Trace, which traces current or most recent call. Presents four cases highlighting issues created by availability and use of new telephone…

KSC-2011-4001

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare their remote controlled or autonomous excavator, called a lunabot, in a tent next to the "Lunarena" at the Kennedy Space Center Visitor Complex. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-4000

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare their remote controlled or autonomous excavator, called a lunabot, in a tent next to the "Lunarena" at the Kennedy Space Center Visitor Complex. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-3960

NASA Image and Video Library

2011-05-24

University students prepare their team's remote controlled or autonomous excavator, called a lunabot, to maneuver in about 60 tons of ultra-fine simulated lunar soil, called BP-1. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoiber, Marcus H.; Brown, James B.

This software implements the first base caller for nanopore data that calls bases directly from raw data. The basecRAWller algorithm has two major advantages over current nanopore base calling software: (1) streaming base calling and (2) base calling from information rich raw signal. The ability to perform truly streaming base calling as signal is received from the sequencer can be very powerful as this is one of the major advantages of this technology as compared to other sequencing technologies. As such enabling as much streaming potential as possible will be incredibly important as this technology continues to become more widelymore » applied in biosciences. All other base callers currently employ the Viterbi algorithm which requires the whole sequence to employ the complete base calling procedure and thus precludes a natural streaming base calling procedure. The other major advantage of the basecRAWller algorithm is the prediction of bases from raw signal which contains much richer information than the segmented chunks that current algorithms employ. This leads to the potential for much more accurate base calls which would make this technology much more valuable to all of the growing user base for this technology.« less

KSC-2011-4154

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- A remote controlled or autonomous excavator, called a lunabot, is on display outside of the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida where university students maneuver their remote controlled lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

QTCM Software Documentation. Volume 1. Programmers’s Manual

DTIC Science & Technology

1990-11-01

technologies are implemented. Since the PSNs are comprised of private companies, the OMNCS has little direct control over how they operate and the... control equipment at each node to prevent any congestion at the switches. Therefore, all call blocking is modeled to occur at the trunks rather than at the...main program is linked with separately compiled subroutines that can be grouped intoI seven distinct functional areas as follows: Control code File

Hypertext, Hypermedia, and Metacognition: Research and Instructional Implications for Disabled Readers.

ERIC Educational Resources Information Center

Balajthy, Ernest

1990-01-01

The article examines the potential impact of computer-based text technologies, called hypermedia, on disabled readers. Discussed are hypertext, the hypercard, and implications of metacognitive research (such as author versus user control over text manipulations), instructional implications, and instructional text engineering. (DB)

Communication technologies to improve HPV vaccination initiation and completion: A systematic review.

PubMed

Francis, Diane B; Cates, Joan R; Wagner, Kyla P Garrett; Zola, Tracey; Fitter, Jenny E; Coyne-Beasley, Tamera

2017-07-01

This systematic review examines the effectiveness of communication technology interventions on HPV vaccination initiation and completion. A comprehensive search strategy was used to identify existing randomized controlled trials testing the impact of computer-, mobile- or internet-based interventions on receipt of any dose of the HPV vaccine. Twelve relevant studies were identified with a total of 38,945 participants. The interventions were delivered using several different methods, including electronic health record (i.e. recall/reminder) prompts, text messaging, automated phone calls, interactive computer videos, and email. Vaccine initiation and completion was greater for technology-based studies relative to their control conditions. There is evidence that interventions utilizing communication technologies as their sole or primary mode for HPV vaccination intervention delivery may increase vaccination coverage. Communication technologies hold much promise for the future of HPV vaccination efforts, especially initiatives in practice-based settings. Copyright © 2017 Elsevier B.V. All rights reserved.

Case studies of technology for adults with multiple disabilities to make telephone calls independently.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Boccasini, Adele; La Martire, Maria L; Lang, Russell

2014-08-01

Recent literature has shown the possibility of enabling individuals with multiple disabilities to make telephone calls independently via computer-aided telephone technology. These two case studies assessed a modified version of such technology and a commercial alternative to it for a woman and a man with multiple disabilities, respectively. The modified version used in Study 1 (a) presented the names of the persons available for a call and (b) reminded the participant of the response she needed to perform (i.e., pressing a microswitch) if she wanted to call any of those names/persons. The commercial device used in Study 2 was a Galaxy S3 (Samsung) equipped with the S-voice module, which allowed the participant to activate phone calls by uttering the word "Call" followed by the name of the persons he wanted to call. The results of the studies showed that the participants learned to make phone calls independently using the technology/device available. Implications of the results are discussed.

KSC-2011-4145

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida, university students maneuver their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4157

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida, university students maneuver their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4161

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida, university students give their "thumbs up" after maneuvering their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4150

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students monitor their team's remote controlled or autonomous excavator, called a lunabot, as it is maneuvered in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4018

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor in Florida, university students maneuver their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

KSC-2011-4149

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students monitor their team's remote controlled or autonomous excavator, called a lunabot, as it is maneuvered in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4162

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students monitor their team's remote controlled or autonomous excavator, called a lunabot, as it is maneuvered in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4019

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- University students monitor their team's remote controlled or autonomous excavator, called a lunabot, as it is maneuvered in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

KSC-2011-4144

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida, university students maneuver their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4017

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- Inside the "Lunarena" at the Kennedy Space Center Visitor in Florida, university students maneuver their remote controlled or autonomous excavators, called lunabots, in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

Neural network for control of rearrangeable Clos networks.

PubMed

Park, Y K; Cherkassky, V

1994-09-01

Rapid evolution in the field of communication networks requires high speed switching technologies. This involves a high degree of parallelism in switching control and routing performed at the hardware level. The multistage crossbar networks have always been attractive to switch designers. In this paper a neural network approach to controlling a three-stage Clos network in real time is proposed. This controller provides optimal routing of communication traffic requests on a call-by-call basis by rearranging existing connections, with a minimum length of rearrangement sequence so that a new blocked call request can be accommodated. The proposed neural network controller uses Paull's rearrangement algorithm, along with the special (least used) switch selection rule in order to minimize the length of rearrangement sequences. The functional behavior of our model is verified by simulations and it is shown that the convergence time required for finding an optimal solution is constant, regardless of the switching network size. The performance is evaluated for random traffic with various traffic loads. Simulation results show that applying the least used switch selection rule increases the efficiency in switch rearrangements, reducing the network convergence time. The implementation aspects are also discussed to show the feasibility of the proposed approach.

Performance, Cognitive Load, and Behaviour of Technology-Assisted English Listening Learning: From CALL to MALL

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Warden, Clyde A.; Liang, Chaoyun; Chou, Pao-Nan

2018-01-01

This study examines differences in English listening comprehension, cognitive load, and learning behaviour between outdoor ubiquitous learning and indoor computer-assisted learning. An experimental design, employing a pretest-posttest control group is employed. Randomly assigned foreign language university majors joined either the experimental…

Summary of Research 1997, Department of Mechanical Engineering.

DTIC Science & Technology

1999-01-01

Maintenance for Diesel Engines 49 Control Architectures and Non-Linear Controllers for Unmanned Underwater Vehicles 38 Creep of Fiber Reinforced Metal...Technology Demonstration (ATD) 50 Development of Delphi Visual Performance Model 25 Diffraction Methods for the Accurate Measurement of Structure Factors...literature. If this could be done, a U.S. version of ORACLE (to be called DELPHI ) could be developed and used. The result has been the development of a

Recent Advancements towards Full-System Microfluidics

PubMed Central

Miled, Amine

2017-01-01

Microfluidics is quickly becoming a key technology in an expanding range of fields, such as medical sciences, biosensing, bioactuation, chemical synthesis, and more. This is helping its transformation from a promising R&D tool to commercially viable technology. Fuelling this expansion is the intensified focus on automation and enhanced functionality through integration of complex electrical control, mechanical properties, in situ sensing and flow control. Here we highlight recent contributions to the Sensors Special Issue series called “Microfluidics-Based Microsystem Integration Research” under the following categories: (i) Device fabrication to support complex functionality; (ii) New methods for flow control and mixing; (iii) Towards routine analysis and point of care applications; (iv) In situ characterization; and (v) Plug and play microfluidics. PMID:28757587

Research on The Construction of Flexible Multi-body Dynamics Model based on Virtual Components

NASA Astrophysics Data System (ADS)

Dong, Z. H.; Ye, X.; Yang, F.

2018-05-01

Focus on the harsh operation condition of space manipulator, which cannot afford relative large collision momentum, this paper proposes a new concept and technology, called soft-contact technology. In order to solve the problem of collision dynamics of flexible multi-body system caused by this technology, this paper also proposes the concepts of virtual components and virtual hinges, and constructs flexible dynamic model based on virtual components, and also studies on its solutions. On this basis, this paper uses NX to carry out model and comparison simulation for space manipulator in 3 different modes. The results show that using the model of multi-rigid body + flexible body hinge + controllable damping can make effective control on amplitude for the force and torque caused by target satellite collision.

Use of Mobile Phone Technology to Improve follow-up at a Community Mental Health Clinic: A Randomized Control Trial.

PubMed

Singh, Gaurav; Manjunatha, Narayana; Rao, Sabina; Shashidhara, H N; Moirangthem, Sydney; Madegowda, Rajendra K; Binukumar, B; Varghese, Mathew

2017-01-01

Mobile phone technology is being used worldwide to improve follow-ups in health care. Aim of the study is to evaluate whether the use of mobile technology will improve or not the follow-up of Indian patients from a community mental health center. Patients or caregivers having mobile phones and consenting for study were enrolled, and sociodemographic and clinical details of patients were taken. Participants were randomized into two groups (short message service [SMS] vs. non-SMS group). At first intervention level, a SMS was sent to SMS group (not in non-SMS group) 1 day before their appointment. At second-level intervention (voice call level), patients from both groups who missed their first appointment were given a voice call requesting them to come for follow-up, and the reasons for first missed appointments (MA) were also elicited. The effect of these two intervention levels (first SMS for SMS group and next voice calls for both groups) on follow-up was evaluated. A total of 214 patients were enrolled in the study. At first SMS intervention level of SMS group ( n = 106), 62.26% of participants reached appointment-on-time (RA), while in the non-SMS/as usual group ( n = 108), 45.37% of patients RA. The difference of these groups is statistically significant. At second-level intervention (voice call), 66 of 88 (another 15 were unable to contact) were came for follow-up consultation within 2 days of MA. Distance and diagnosis of alcohol dependence were significantly associated with MA. Social reasons were most common reasons for first MA. The use of mobile phone technology in an outpatient community psychiatric clinic improved follow-up significantly.

Control of free-flying space robot manipulator systems

NASA Technical Reports Server (NTRS)

Cannon, Robert H., Jr.

1988-01-01

The focus of the work is to develop and perform a set of research projects using laboratory models of satellite robots. These devices use air cushion technology to simulate in two dimensions the drag-free, zero-g conditions of space. Five research areas are examined: cooperative manipulation on a fixed base; cooperative manipulation on a free-floating base; global navigation and control of a free-floating robot; an alternative transport mode call Locomotion Enhancement via Arm Push-Off (LEAP), and adaptive control of LEAP.

78 FR 90 - National Medal of Technology and Innovation Call for 2013 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... Medal highlights the national importance of fostering technological innovation resulting in commercially...] National Medal of Technology and Innovation Call for 2013 Nominations AGENCY: United States Patent and... Medal of Technology and Innovation (NMTI). Since establishment by Congress in the Stevenson-Wydler...

UFC advisor: An AI-based system for the automatic test environment

NASA Technical Reports Server (NTRS)

Lincoln, David T.; Fink, Pamela K.

1990-01-01

The Air Logistics Command within the Air Force is responsible for maintaining a wide variety of aircraft fleets and weapon systems. To maintain these fleets and systems requires specialized test equipment that provides data concerning the behavior of a particular device. The test equipment is used to 'poke and prod' the device to determine its functionality. The data represent voltages, pressures, torques, temperatures, etc. and are called testpoints. These testpoints can be defined numerically as being in or out of limits/tolerance. Some test equipment is termed 'automatic' because it is computer-controlled. Due to the fact that effective maintenance in the test arena requires a significant amount of expertise, it is an ideal area for the application of knowledge-based system technology. Such a system would take testpoint data, identify values out-of-limits, and determine potential underlying problems based on what is out-of-limits and how far. This paper discusses the application of this technology to a device called the Unified Fuel Control (UFC) which is maintained in this manner.

A review of fault tolerant control strategies applied to proton exchange membrane fuel cell systems

NASA Astrophysics Data System (ADS)

Dijoux, Etienne; Steiner, Nadia Yousfi; Benne, Michel; Péra, Marie-Cécile; Pérez, Brigitte Grondin

2017-08-01

Fuel cells are powerful systems for power generation. They have a good efficiency and do not generate greenhouse gases. This technology involves a lot of scientific fields, which leads to the appearance of strongly inter-dependent parameters. This makes the system particularly hard to control and increases fault's occurrence frequency. These two issues call for the necessity to maintain the system performance at the expected level, even in faulty operating conditions. It is called "fault tolerant control" (FTC). The present paper aims to give the state of the art of FTC applied to the proton exchange membrane fuel cell (PEMFC). The FTC approach is composed of two parts. First, a diagnosis part allows the identification and the isolation of a fault; it requires a good a priori knowledge of all the possible faults. Then, a control part allows an optimal control strategy to find the best operating point to recover/mitigate the fault; it requires the knowledge of the degradation phenomena and their mitigation strategies.

Mobile phones improve case detection and management of malaria in rural Bangladesh

PubMed Central

2013-01-01

Background The recent introduction of mobile phones into the rural Bandarban district of Bangladesh provided a resource to improve case detection and treatment of patients with malaria. Methods During studies to define the epidemiology of malaria in villages in south-eastern Bangladesh, an area with hypoendemic malaria, the project recorded 986 mobile phone calls from families because of illness suspected to be malaria between June 2010 and June 2012. Results Based on phone calls, field workers visited the homes with ill persons, and collected blood samples for malaria on 1,046 people. 265 (25%) of the patients tested were positive for malaria. Of the 509 symptomatic malaria cases diagnosed during this study period, 265 (52%) were detected because of an initial mobile phone call. Conclusion Mobile phone technology was found to be an efficient and effective method for rapidly detecting and treating patients with malaria in this remote area. This technology, when combined with local knowledge and field support, may be applicable to other hard-to-reach areas to improve malaria control. PMID:23374585

From TPACK-in-Action Workshops to English Classrooms: CALL Competencies Developed and Adopted into Classroom Teaching

ERIC Educational Resources Information Center

Tai, Shu-Ju

2013-01-01

As researchers in the CALL teacher education field noted, teachers play the pivotal role in the language learning classrooms because they are the gate keepers who decide whether technology or CALL has a place in their teaching, and they select technology to support their teaching, which determines what CALL activities language learners are exposed…

KSC-2011-4148

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- While an event judge looks on, university students monitor their team's remote controlled or autonomous excavator, called a lunabot, as it is maneuvered in a "sand box" of ultra-fine simulated lunar soil during NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

Fire safety concerns in space operations

NASA Technical Reports Server (NTRS)

Friedman, Robert

1987-01-01

This paper reviews the state-of-the-art in fire control techniques and identifies important issues for continuing research, technology, and standards. For the future permanent orbiting facility, the space station, fire prevention and control calls for not only more stringent fire safety due to the long-term and complex missions, but also for simplified and flexible safety rules to accommodate the variety of users. Future research must address a better understanding of the microgravity space environment as it influences fire propagation and extinction and the application of the technology of fire detection, extinguishment, and material assessment. Spacecraft fire safety should also consider the adaptation of methods and concepts derived from aircraft and undersea experience.

Printing Insecurity? The Security Implications of 3D-Printing of Weapons.

PubMed

Walther, Gerald

2015-12-01

In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the U.S. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing technology and 3D guns. It argues that current arms control and transfer policies are adequate to cover 3D-printed guns as well. However, while this analysis may hold up currently, progress in printing technology needs to be monitored to deal with future dangers pre-emptively.

Voice Over Internet Protocol (VoIP) in a Control Center Environment

NASA Technical Reports Server (NTRS)

Pirani, Joseph; Calvelage, Steven

2010-01-01

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

CALL Essentials: Principles and Practice in CALL Classrooms

ERIC Educational Resources Information Center

Egbert, Joy

2005-01-01

Computers and the Internet offer innovative teachers exciting ways to enhance their pedagogy and capture their students' attention. These technologies have created a growing field of inquiry, computer-assisted language learning (CALL). As new technologies have emerged, teaching professionals have adapted them to support teachers and learners in…

KSC-2011-4166

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, Eric Reiners, manager with the Product Development and Global Technology Division of Caterpillar Inc., speaks to university students at the award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4015

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- Tana Utley, Caterpillar Company vice president and chief technology officer talks to university students gathered for the opening ceremony of NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

The Effects of Microblogging on Middle School Students' Engagement and Critical Thinking

ERIC Educational Resources Information Center

Singleton, Sondra Shively

2016-01-01

The purpose of this study was to examine the effect of microblogging as an authentic real-world technology in a middle school classroom in response to the 2010 Department of Education's call to provide students with more relevant digital experiences. The non-equivalent control group, pretest-posttest design study was used to determine if…

Innovative Science and Technology (IST) in Support of SDI (Strategic Defense Initiative) BM/C3 (Battle Management/Command, Control and Communications)

DTIC Science & Technology

1988-08-01

primitive model would be unthinkable. Similarly, while human operators once made plugboard connections to complete telephone circuits for long-distance...calls, the current volume of U.S. long-distance telephone traffic could not be serviced if the entire U.S. population sat before telephone plugboards

Developments in Science and Technology.

DTIC Science & Technology

1980-01-01

control. Sucessful completion of the testing and cer- a single unduplicated track file, thereby reducing tification of readiness represents a...Navy shipboard surveillance radar systems Service Corp., is called the single radar performance has been successfully designed, developed, and tested at...for Navy deteciion/disclosure ranges. The single radar per- shipboard surveillance radar systems are reduced by formance prediction system can be

EPA'S CONTROL TECHNOLOGY APPROACH TO ASSISTING STATES AND REGIONS WITH AIR TOXICS PROBLEMS: FIVE CASE STUDIES

EPA Science Inventory

The paper discusses a new U.S. strategy to reduce public exposure to toxic air pollutants in the ambient air. he strategy calls for state and local authorities to take on more of the lead regulatory role. he shift in emphasis and responsibility prompted EPA's Offices of Research ...

A call for randomized controlled cost-effectiveness analysis of percutaneous transluminal coronary angioplasty.

PubMed

Holly, N

1988-01-01

A rapidly evolving technology, percutaneous transluminal coronary angioplasty, is increasingly favored over bypass surgery for treating some types of coronary stenosis because of its less traumatic invasion, better recovery response, and lower initial cost. However, substantially higher failure rates in initial procedures offset PTCA's savings to an unknown extent and cloud analysis of its overall impact. Lack of randomized clinical data precludes valid cost-effectiveness comparison of the technologies at this time. Criteria for establishing valid data and evaluations of currently available data are described in this paper.

Ceramic insulation/multifoil composite for thermal protection of reentry spacecraft

NASA Technical Reports Server (NTRS)

Pitts, W. C.; Kourtides, D. A.

1989-01-01

A new type of insulation blanket called Composite Flexible Blanket Insulation is proposed for thermal protection of advanced spacecraft in regions where the maximum temperature is not excessive. The blanket is a composite of two proven insulation materials: ceramic insulation blankets from Space Shuttle technology and multilayer insulation blankets from spacecraft thermal control technology. A potential heatshield weight saving of up to 500 g/sq m is predicted. The concept is described; proof of concept experimental data are presented; and a spaceflight experiment to demonstrate its actual performance is discussed.

Supersonic Retropropulsion Technology Development in NASA's Entry, Descent, and Landing Project

NASA Technical Reports Server (NTRS)

Edquist, Karl T.; Berry, Scott A.; Rhode, Matthew N.; Kelb, Bil; Korzun, Ashley; Dyakonov, Artem A.; Zarchi, Kerry A.; Schauerhamer, Daniel G.; Post, Ethan A.

2012-01-01

NASA's Entry, Descent, and Landing (EDL) space technology roadmap calls for new technologies to achieve human exploration of Mars in the coming decades [1]. One of those technologies, termed Supersonic Retropropulsion (SRP), involves initiation of propulsive deceleration at supersonic Mach numbers. The potential benefits afforded by SRP to improve payload mass and landing precision make the technology attractive for future EDL missions. NASA's EDL project spent two years advancing the technological maturity of SRP for Mars exploration [2-15]. This paper summarizes the technical accomplishments from the project and highlights challenges and recommendations for future SRP technology development programs. These challenges include: developing sufficiently large SRP engines for use on human-scale entry systems; testing and computationally modelling complex and unsteady SRP fluid dynamics; understanding the effects of SRP on entry vehicle stability and controllability; and demonstrating sub-scale SRP entry systems in Earth's atmosphere.

The role of mobile devices in doctor-patient communication: A systematic review and meta-analysis.

PubMed

Kashgary, Abdullah; Alsolaimani, Roaa; Mosli, Mahmoud; Faraj, Samer

2017-09-01

Introduction In the last few years, the use of telecommunication and mobile technology has grown significantly. This has led to a notable increase in the utilization of this telecommunication in healthcare, namely phone calls and text messaging (SMS). However, evaluating its global impact on improving healthcare processes and outcomes demands a more comprehensive assessment. In this study, we focused on the role of mobile devices via phone calls and SMS in patient-doctor communication, and aimed to assess its impact on various health outcomes. Methods Major databases, including MEDLINE, EMBASE, PsycINFO, Global Health, and Cochrane CENTRAL, were searched for clinical trials that investigated mobile-device technology in any facet of doctor-patient communication published between 1990 and April 2015. A meta-analysis was performed where appropriate. Results Sixty-two articles met our inclusion criteria. Of those, 23 articles investigated mobile appointment reminder technologies, 19 investigated medication adherence, 20 investigated disease-control interventions, and two investigated test-result reporting. Patients who received an appointment reminder were 10% less likely to miss an appointment (relative risk [RR] = 1.11, 95% confidence interval [CI] 1.08-1.15). Mobile interventions increased medication adherence by 22% (RR = 1.22, 95% CI 1.09-1.36). Ten of 20 studies examining disease control reported statistically significant reductions in clinically meaningful endpoints. The use of mobile-device interventions improved forced expiratory volume in one second and hemoglobin A1c percentage in meta-analyses. Conclusion The use of mobile-device technologies exerted modest improvements in communication and health outcomes. Further research is needed to determine the true effect of these technologies on doctor-patient communication.

WTEC panel report on European nuclear instrumentation and controls

NASA Technical Reports Server (NTRS)

White, James D.; Lanning, David D.; Beltracchi, Leo; Best, Fred R.; Easter, James R.; Oakes, Lester C.; Sudduth, A. L.

1991-01-01

Control and instrumentation systems might be called the 'brain' and 'senses' of a nuclear power plant. As such they become the key elements in the integrated operation of these plants. Recent developments in digital equipment have allowed a dramatic change in the design of these instrument and control (I&C) systems. New designs are evolving with cathode ray tube (CRT)-based control rooms, more automation, and better logical information for the human operators. As these new advanced systems are developed, various decisions must be made about the degree of automation and the human-to-machine interface. Different stages of the development of control automation and of advanced digital systems can be found in various countries. The purpose of this technology assessment is to make a comparative evaluation of the control and instrumentation systems that are being used for commercial nuclear power plants in Europe and the United States. This study is limited to pressurized water reactors (PWR's). Part of the evaluation includes comparisons with a previous similar study assessing Japanese technology.

Applying Technology in the Work Environment.

ERIC Educational Resources Information Center

Greenwood, Reed, Ed.

A series of papers is presented from two symposia sponsored by the Work Environment and Technology Committee and offered at annual conferences of the President's Committee on Employment of People with Disabilities. The 1988 symposium was called "Applying Technology in the Work Environment" and the 1989 symposium was called "Reasonable…

Dead Zone Oscillator Control for Communication-Free Synchronization of Paralleled, Three-Phase, Current-Controlled Inverters

DTIC Science & Technology

2016-05-11

the phases of the system load and ground, so to size the voltage divider appropriately Vsys is set equal to the maximum phase-to-ground voltage. The...civilian and military systems is increasing due to technological improvements in power conversion and changing requirements in system loads. The development...of high-power pulsed loads on naval platforms, such as the Laser Weapon System (LaWS) and the electromagnetic railgun, calls for the ability to

Optical And Environmental Properties Of NCAP Glazing Products

NASA Astrophysics Data System (ADS)

van Konynenburg, Peter; Wipfler, Richard T.; Smith, Jerry L.

1989-07-01

The first large area, commercially available, electrically-controllable glazing products sold under the tradename VARILITETM are based on a new liquid crystal film technology called NCAP. The glazing products can be switched in milliseconds between a highly translucent state (for privacy and glare control) to a transparent state (for high visibility) with the application of an AC voltage. The optical and environmental properties are demonstrated to meet the general requirements for architectural glazing use. The first qualified indoor product is described in detail.

Computer control of a scanning electron microscope for digital image processing of thermal-wave images

NASA Technical Reports Server (NTRS)

Gilbert, Percy; Jones, Robert E.; Kramarchuk, Ihor; Williams, Wallace D.; Pouch, John J.

1987-01-01

Using a recently developed technology called thermal-wave microscopy, NASA Lewis Research Center has developed a computer controlled submicron thermal-wave microscope for the purpose of investigating III-V compound semiconductor devices and materials. This paper describes the system's design and configuration and discusses the hardware and software capabilities. Knowledge of the Concurrent 3200 series computers is needed for a complete understanding of the material presented. However, concepts and procedures are of general interest.

Enabling Spacecraft Formation Flying through Position Determination, Control and Enhanced Automation Technologies

NASA Technical Reports Server (NTRS)

Bristow, John; Bauer, Frank; Hartman, Kate; How, Jonathan

2000-01-01

Formation Flying is revolutionizing the way the space community conducts science missions around the Earth and in deep space. This technological revolution will provide new, innovative ways for the community to gather scientific information, share that information between space vehicles and the ground, and expedite the human exploration of space. Once fully matured, formation flying will result in numerous sciencecraft acting as virtual platforms and sensor webs, gathering significantly more and better science data than call be collected today. To achieve this goal, key technologies must be developed including those that address the following basic questions posed by the spacecraft: Where am I? Where is the rest of the fleet? Where do I need to be? What do I have to do (and what am I able to do) to get there? The answers to these questions and the means to implement those answers will depend oil the specific mission needs and formation configuration. However, certain critical technologies are common to most formations. These technologies include high-precision position and relative-position knowledge including Global Positioning System (GPS) mid celestial navigation; high degrees of spacecraft autonomy inter-spacecraft communication capabilities; targeting and control including distributed control algorithms, and high precision control thrusters and actuators. This paper provides an overview of a selection of the current activities NASA/DoD/Industry/Academia are working to develop Formation Flying technologies as quickly as possible, the hurdles that need to be overcome to achieve our formation flying vision, and the team's approach to transfer this technology to space. It will also describe several of the formation flying testbeds, such as Orion and University Nanosatellites, that are being developed to demonstrate and validate many of these innovative sensing and formation control technologies.

Perspectives of Nurses and Patients on Call Light Technology.

PubMed

Galinato, Jose; Montie, Mary; Patak, Lance; Titler, Marita

2015-08-01

Call lights are prevalent in inpatient healthcare facilities across the nation. While call light use directly influences the delivery of nursing care, there remain significant gaps both in research and technology that can affect the quality of care and patient satisfaction. This study examines nurse and patient perceptions of the use of a new call communication solution, Eloquence, in the acute care inpatient setting. Eighteen patients were recruited for the study and participated in individual semistructured interviews during their hospital stay. Eighteen nurses were recruited and participated in focus groups for this study. Qualitative descriptive methods were used to analyze the data. Results revealed themes of usability, improved communication, and suggestions for improvement to the alpha prototype design. After a demonstration of the use and capability of Eloquence, nurse and patient participants found Eloquence as a welcomed advancement in nurse call technology that has the potential to improve workflow and patient outcomes. In addition, the participants also proposed ideas on how to further develop the technology to improve its use.

The National Educational Technology Plan Doesn't Live up to Its Call for Revolutionary Transformation

ERIC Educational Resources Information Center

Rose, Raymond M.

2011-01-01

The National Educational Technology Plan (NETP) calls for the revolutionary transformation of the American educational system. The plan correctly points to the decisions of the late 1800s that still direct educational policy today, and correctly calls the school change efforts evolutionary tinkering. The author, a pioneer in online education…

A review on recent technologies for the manufacture of pulmonary drugs.

PubMed

Hadiwinoto, Gabriela Daisy; Lip Kwok, Philip Chi; Lakerveld, Richard

2018-01-01

This review discusses recent developments in the manufacture of inhalable dry powder formulations. Pulmonary drugs have distinct advantages compared with other drug administration routes. However, requirements of drugs properties complicate the manufacture. Control over crystallization to make particles with the desired properties in a single step is often infeasible, which calls for micronization techniques. Although spray drying produces particles in the desired size range, a stable solid state may not be attainable. Supercritical fluids may be used as a solvent or antisolvent, which significantly reduces solvent waste. Future directions include application areas such as biopharmaceuticals for dry powder inhalers and new processing strategies to improve the control over particle formation such as continuous manufacturing with in-line process analytical technologies.

Remote-area health care delivery through space technology - STARPAHC

NASA Technical Reports Server (NTRS)

Belasco, N.; Johnston, R. S.; Stonesifer, J. C.; Pool, S. L.

1977-01-01

A joint NASA/HEW project called Space Technology Applied to Rural Papage Advanced Health Care (STARPAHC) has been developed to deliver quality health care to inhabitants of remote geographical areas. The system consists of a hospital-based support control center, a fixed clinic, a mobile clinic, and a referral center with access to specialists via television links to the control center. A strategically located relay station routes television, voice, and data transmissions between system elements. A model system has been installed on the Papage Indian Reservation in Arizona, and is undergoing a 2-year evaluation. The system has been shown to be both effective and cost-efficient, and applications of the concept are planned for future manned spacecraft flights.

2015 Summary Report on Industrial and Regulatory Engagement Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Kenneth David

2015-09-01

The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies pathway of the Light Water Reactor Sustainability(LWRS) Program conducts a vigorous engagement strategy with the U.S. nuclear power industry, including the nuclear operating companies, major support organizations, the Nuclear Regulatory Commission (NRC), and suppliers. The goal of this engagement strategy is to develop a shared vision and common understanding across the nuclear industry of the need for II&C modernization, the performance improvement that can be obtained, and the opportunities for collaboration to enact this vision. The primary means of engaging the nuclear operating companies is through a Utility Working Group (UWG),more » composed of utility representatives that participate in formal meetings and bi-monthly phone calls to provide input on nuclear plant needs and priorities for II&C technologies. Two working groups were initiated during FY 2015 to provide a means for UWG members to focus on particular technologies of interest. The Outage Improvement Working Group consists of eight utilities that participate in periodic conference calls and have access to a share-point web page for acccess to project materials developed in the Advanced Outage Control Center pilot project. In the area of computer-based procedures and automated work packages, the II&C Pathway has worked with the Nuclear Information Technology Strategic Leadership (NITSL) to set up a monthly conference call with interested utility members to discuss various aspects of mobile worker technologies. Twenty one technical and project reports were delivered to the UWG during FY 2015, reflecting the work of the II&C Pathway pilot projects during the year. Distribution of these reports is one of the primary means of transferring to the nuclear industry the knowledge and experience gained during the development of advanced II&C technologies in support of LWR sustainability. Site visits to discuss pilot project activities and future plans were made to Arizona Public Service, Exelon, Duke Energy, Pacific Gas & Electric, SCANA, Southern Nuclear, South Texas Project, STARS Alliance, Tennessee Valley Authority, and Xcel. Discussions were also held on the pathway goals and activities with major industry support organizations during FY 2102, including the Institute of Nuclear Power Operations (INPO), the Nuclear Information Technology Strategic Leadership (NITSL), the Nuclear Energy Institute (NEI), and the Electric Power Research Institute. The Advanced II&C Pathway work was presented at five major industry conferences and Informal discussions were held with key NRC managers at industry conferences. In addition, discussions were held with NRC senior managers on digital regulatory issues through participation on the NEI Digital I&C Working Group. Meetings were held with major industry suppliers and consultants, to explore opportunities for collaboration and to provide a means of pilot project technology transfer. In the international area, discussions were held with Electricite’ de France (EdF) concerning possible collaboration in the area NPP configuration control using intelligent wireless devices.« less

Programmable ubiquitous telerobotic devices

NASA Astrophysics Data System (ADS)

Doherty, Michael; Greene, Matthew; Keaton, David; Och, Christian; Seidl, Matthew L.; Waite, William; Zorn, Benjamin G.

1997-12-01

We are investigating a field of research that we call ubiquitous telepresence, which involves the design and implementation of low-cost robotic devices that can be programmed and operated from anywhere on the Internet. These devices, which we call ubots, can be used for academic purposes (e.g., a biologist could remote conduct a population survey), commercial purposes (e.g., a house could be shown remotely by a real-estate agent), and for recreation and education (e.g., someone could tour a museum remotely). We anticipate that such devices will become increasingly common due to recent changes in hardware and software technology. In particular, current hardware technology enables such devices to be constructed very cheaply (less than $500), and current software and network technology allows highly portable code to be written and downloaded across the Internet. In this paper, we present our prototype system architecture, and the ubot implementation we have constructed based on it. The hardware technology we use is the handy board, a 6811-based controller board with digital and analog inputs and outputs. Our software includes a network layer based on TCP/IP and software layers written in Java. Our software enables users across the Internet to program the behavior of the vehicle and to receive image feedback from a camera mounted on it.

Advanced two-phase heat transfer systems

NASA Technical Reports Server (NTRS)

Swanson, Theodore D.

1992-01-01

Future large spacecraft, such as the Earth Observing System (EOS) platforms, will require a significantly more capable thermal control system than is possible with current 'passive' technology. Temperatures must be controlled much more tightly over a larger surface area. Numerous heat load sources will often be located inside the body of the spacecraft without a good view to space. Power levels and flux densities may be higher than can be accommodated with traditional technology. Integration and ground testing will almost certainly be much more difficult with such larger, more complex spacecraft. For these and similar reasons, the Goddard Space Flight Center (GSFC) has been developing a new, more capable thermal control technology called capillary pumped loops (CPL's). CPL's represent an evolutionary improvement over heat pipes; they can transport much greater quantities of heat over much longer distances and can serve numerous heat load sources. In addition, CPL's can be fabricated into large cold plates that can be held to tight thermal gradients. Development of this technology began in the early 1980's and is now reaching maturity. CPL's have recently been baselined for the EOS-AM platform (1997 launch) and the COMET spacecraft (1992 launch). This presentation describes this new technology and its applications. Most of the viewgraphs are self descriptive. For those that are less clear additional comments are provided.

Effective technologies for noninvasive remote monitoring in heart failure.

PubMed

Conway, Aaron; Inglis, Sally C; Clark, Robyn A

2014-06-01

Trials of new technologies to remotely monitor for signs and symptoms of worsening heart failure are continually emerging. The extent to which technological differences impact the effectiveness of noninvasive remote monitoring for heart failure management is unknown. This study examined the effect of specific technology used for noninvasive remote monitoring of people with heart failure on all-cause mortality and heart failure-related hospitalizations. A subanalysis of a large systematic review and meta-analysis was conducted. Studies were stratified according to the specific type of technology used, and separate meta-analyses were performed. Four different types of noninvasive remote monitoring technologies were identified, including structured telephone calls, videophone, interactive voice response devices, and telemonitoring. Only structured telephone calls and telemonitoring were effective in reducing the risk of all-cause mortality (relative risk [RR]=0.87; 95% confidence interval [CI], 0.75-1.01; p=0.06; and RR=0.62; 95% CI, 0.50-0.77; p<0.0001, respectively) and heart failure-related hospitalizations (RR=0.77; 95% CI, 0.68-0.87; p<0.001; and RR=0.75; 95% CI, 0.63-0.91; p=0.003, respectively). More research data are required for videophone and interactive voice response technologies. This subanalysis identified that only two of the four specific technologies used for noninvasive remote monitoring in heart failure improved outcomes. When results of studies that involved these disparate technologies were combined in previous meta-analyses, significant improvements in outcomes were identified. As such, this study has highlighted implications for future meta-analyses of randomized controlled trials focused on evaluating the effectiveness of remote monitoring in heart failure.

X-38 Experimental Controls Laws

NASA Technical Reports Server (NTRS)

Munday, Steve; Estes, Jay; Bordano, Aldo J.

2000-01-01

X-38 Experimental Control Laws X-38 is a NASA JSC/DFRC experimental flight test program developing a series of prototypes for an International Space Station (ISS) Crew Return Vehicle, often called an ISS "lifeboat." X- 38 Vehicle 132 Free Flight 3, currently scheduled for the end of this month, will be the first flight test of a modem FCS architecture called Multi-Application Control-Honeywell (MACH), originally developed by the Honeywell Technology Center. MACH wraps classical P&I outer attitude loops around a modem dynamic inversion attitude rate loop. The dynamic inversion process requires that the flight computer have an onboard aircraft model of expected vehicle dynamics based upon the aerodynamic database. Dynamic inversion is computationally intensive, so some timing modifications were made to implement MACH on the slower flight computers of the subsonic test vehicles. In addition to linear stability margin analyses and high fidelity 6-DOF simulation, hardware-in-the-loop testing is used to verify the implementation of MACH and its robustness to aerodynamic and environmental uncertainties and disturbances.

Management of Guidance, Navigation and Control Technologies for Spacecraft Formations under the NASA Cross-Enterprise Technology Development Program (CETDP)

NASA Technical Reports Server (NTRS)

Hartman, Kathy; Weidow, David; Hadaegh, Fred

1999-01-01

Breakthrough technology development is critical to securing the future of our space industry. The National Aeronautics and Space Administration (NASA) Cross-Enterprise Technology Development Program (CETDP) is developing critical space technologies that enable innovative and less costly missions, and spawn new mission opportunities through revolutionary, long-term, high-risk, high-payoff technology advances. The CETDP is a NASA-wide activity managed by the Advanced Technology and Mission Studies Division (AT&MS) at Headquarters Office of Space Science. Program management for CETDP is distributed across the multiple NASA Centers and draws on expertise throughout the Agency. The technology research activities are organized along Project-level divisions called thrust areas that are directly linked to the Agency's goals and objectives of the Enterprises: Earth Science, Space Science, Human Exploration and Development of Space; and the Office of the Chief Technologist's (OCT) strategic technology areas. Cross-Enterprise technology is defined as long-range strategic technologies that have broad potential to span the needs of more than one Enterprise. Technology needs are identified and prioritized by each of the primary customers. The thrust area manager (TAM) for each division is responsible for the ultimate success of technologies within their area, and can draw from industry, academia, other government agencies, other CETDP thrust areas, and other NASA Centers to accomplish the goals of the thrust area. An overview of the CETDP and description of the future directions of the thrust area called Distributed Spacecraft are presented in this paper. Revolutionary technologies developed within this thrust area will enable the implementation of a spatially distributed network of individual vehicles, or assets, collaborating as a single collective unit, and exhibiting a common system-wide capability to accomplish a shared objective. With such a capability, new Earth and space science measurement concepts become a reality.

Management of Guidance, Navigation, and Control Technologies for Spacecraft Formations Under the NASA Cross Enterprise Technology Development Program (CETDP)

NASA Technical Reports Server (NTRS)

Hartman, Kathy; Weidow, David; Hadaegh, Fred

1999-01-01

Breakthrough technology development is critical to securing the future of our space industry. The National Aeronautics and Space Administration (NASA) Cross-Enterprise Technology Development Program (CETDP) is developing critical space technologies that enable innovative and less costly missions, and spawn new mission opportunities through revolutionary, long-term, high-risk, high-payoff technology advances. The CETDP is a NASA-wide activity managed by the Advanced Technology and Mission Studies Division (AT&MS) at Headquarters Office of Space Science. Program management for CETDP is distributed across the multiple NASA Centers and draws on expertise throughout the Agency. The technology research activities are organized along Project-level divisions called thrust areas that are directly linked to the Agency's goals and objectives of the Enterprises: Earth Science, Space Science, Human Exploration and Development of Space; and the Office of the Chief Technologist's (OCT) strategic technology areas. Cross-Enterprise technology is defined as long-range strategic technologies that have broad potential to span the needs of more than one Enterprise. Technology needs are identified and prioritized by each of the primary customers. The thrust area manager (TAM) for each division is responsible for the ultimate success of technologies within their area, and can draw from industry, academia, other government agencies, other CETDP thrust areas, and other NASA Centers to accomplish the goals of the thrust area. An overview of the CETDP and description of the future directions of the thrust area called Distributed Spacecraft are presented in this paper. Revolutionary technologies developed within this thrust area will enable the implementation of a spatially distributed network of individual vehicles, or assets, collaborating as a single collective unit, and exhibiting a common system-wide capability to accomplish a shared objective. With such a capability, new Earth and space science measurement concepts become a reality.

Perspectives of Nurses and Patients on Call Light Technology

PubMed Central

Galinato, Jose; Montie, Mary; Patak, Lance; Titler, Marita

2015-01-01

Call lights are prevalent in inpatient healthcare facilities across the nation. While call light use directly influences the delivery of nursing care, there remain significant gaps both in research and technology that can impact the quality of care and patient satisfaction. This study examines the perception of nurses and patients on the use of a new call communication solution, Eloquence™, in the acute care inpatient setting. Eighteen patients were recruited for the study and participated in individual semi-structured interviews during their hospital stay. Eighteen nurses were recruited and participated in focus groups for this study. Qualitative descriptive methods were used to analyze the data. Results revealed themes of usability, improved communication, and suggestions for improvement to the alpha prototype design. After a demonstration of the use and capability of Eloquence™, nurse and patient participants found Eloquence™ as a welcomed advancement in nurse call technology that has the potential to improve workflow and patient outcomes. In addition, the participants also proposed ideas on how to further develop the technology to improve its use. PMID:26176639

TROTER's (Tiny Robotic Operation Team Experiment): A new concept of space robots

NASA Technical Reports Server (NTRS)

Su, Renjeng

1990-01-01

In view of the future need of automation and robotics in space and the existing approaches to the problem, we proposed a new concept of robots for space construction. The new concept is based on the basic idea of decentralization. Decentralization occurs, on the one hand, in using teams of many cooperative robots for construction tasks. Redundancy and modular design are explored to achieve high reliability for team robotic operations. Reliability requirement on individual robots is greatly reduced. Another area of decentralization is manifested by the proposed control hierarchy which eventually includes humans in the loop. The control strategy is constrained by various time delays and calls for different levels of abstraction of the task dynamics. Such technology is needed for remote control of robots in an uncertain environment. Thus, concerns of human safety around robots are relaxed. This presentation also introduces the required technologies behind the new robotic concept.

The Effect of Defense R&D Expenditures on Military Capability and Technological Spillover

DTIC Science & Technology

2013-03-01

ix List of Figures Page Figure 1. Decision Tree for Sectoring R&D Units...approach, often called sectoring , categorizes R&D activities by funding source, and the functional approach categorizes R&D activities by their objective...economic objectives (defense, and control and care of environment) (OECD, 2002). Figure 1 shows the decision tree for sectoring R&D units and

Development of Variable Camber Continuous Trailing Edge Flap for Performance Adaptive Aeroelastic Wing

NASA Technical Reports Server (NTRS)

Nguyen, Nhan; Kaul, Upender; Lebofsky, Sonia; Ting, Eric; Chaparro, Daniel; Urnes, James

2015-01-01

This paper summarizes the recent development of an adaptive aeroelastic wing shaping control technology called variable camber continuous trailing edge flap (VCCTEF). As wing flexibility increases, aeroelastic interactions with aerodynamic forces and moments become an increasingly important consideration in aircraft design and aerodynamic performance. Furthermore, aeroelastic interactions with flight dynamics can result in issues with vehicle stability and control. The initial VCCTEF concept was developed in 2010 by NASA under a NASA Innovation Fund study entitled "Elastically Shaped Future Air Vehicle Concept," which showed that highly flexible wing aerodynamic surfaces can be elastically shaped in-flight by active control of wing twist and bending deflection in order to optimize the spanwise lift distribution for drag reduction. A collaboration between NASA and Boeing Research & Technology was subsequently funded by NASA from 2012 to 2014 to further develop the VCCTEF concept. This paper summarizes some of the key research areas conducted by NASA during the collaboration with Boeing Research and Technology. These research areas include VCCTEF design concepts, aerodynamic analysis of VCCTEF camber shapes, aerodynamic optimization of lift distribution for drag minimization, wind tunnel test results for cruise and high-lift configurations, flutter analysis and suppression control of flexible wing aircraft, and multi-objective flight control for adaptive aeroelastic wing shaping control.

Delivering Unidata Technology via the Cloud

NASA Astrophysics Data System (ADS)

Fisher, Ward; Oxelson Ganter, Jennifer

2016-04-01

Over the last two years, Docker has emerged as the clear leader in open-source containerization. Containerization technology provides a means by which software can be pre-configured and packaged into a single unit, i.e. a container. This container can then be easily deployed either on local or remote systems. Containerization is particularly advantageous when moving software into the cloud, as it simplifies the process. Unidata is adopting containerization as part of our commitment to migrate our technologies to the cloud. We are using a two-pronged approach in this endeavor. In addition to migrating our data-portal services to a cloud environment, we are also exploring new and novel ways to use cloud-specific technology to serve our community. This effort has resulted in several new cloud/Docker-specific projects at Unidata: "CloudStream," "CloudIDV," and "CloudControl." CloudStream is a docker-based technology stack for bringing legacy desktop software to new computing environments, without the need to invest significant engineering/development resources. CloudStream helps make it easier to run existing software in a cloud environment via a technology called "Application Streaming." CloudIDV is a CloudStream-based implementation of the Unidata Integrated Data Viewer (IDV). CloudIDV serves as a practical example of application streaming, and demonstrates how traditional software can be easily accessed and controlled via a web browser. Finally, CloudControl is a web-based dashboard which provides administrative controls for running docker-based technologies in the cloud, as well as providing user management. In this work we will give an overview of these three open-source technologies and the value they offer to our community.

Science and technology issues in spacecraft fire safety

NASA Technical Reports Server (NTRS)

Friedman, Robert; Sacksteder, Kurt R.

1987-01-01

The space station, a permanently-inhabited orbiting laboratory, places new demands on spacecraft fire safety. Long-duration missions may call for more-constrained fire controls, but the accessibility of the space station to a variety of users may call for less-restrictive measures. This paper discusses fire safety issues through a review of the state of the art and a presentation of key findings from a recent NASA Lewis Research Center Workshop. The subjects covered are the fundamental science of low-gravity combustion and the technology advances in fire detection, extinguishment, materials assessment, and atmosphere selection. Key concerns are for the adoption of a fire-safe atmosphere and the substitution for the effective but toxic extinguishant, halon 1301. The fire safety studies and reviews provide several recommendations for further action. One is the expanded research in combustion, sensors, and materials in the low-gravity environment of space. Another is the development of generalized fire-safety standards for spacecraft through cooperative endeavors with aerospace and outside Government and industry sources.

76 FR 2712 - Sara Lee Corporation, Master Data, Cash Applications, Deductions, Collections, Call Center...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-14

... Center, Information Technology, Accounts Payable, General Accounts, Financial Accounting, Payroll, and... Corporation, Master Data, Cash Applications, Deductions, Collections, Call Center, Information Technology, Accounts Payable, General Accounts, Financial Accounts, Payroll, and Employee Master Data Departments...

NPSS on NASA's Information Power Grid: Using CORBA and Globus to Coordinate Multidisciplinary Aeroscience Applications

NASA Technical Reports Server (NTRS)

Lopez, Isaac; Follen, Gregory J.; Gutierrez, Richard; Foster, Ian; Ginsburg, Brian; Larsson, Olle; Martin, Stuart; Tuecke, Steven; Woodford, David

2000-01-01

This paper describes a project to evaluate the feasibility of combining Grid and Numerical Propulsion System Simulation (NPSS) technologies, with a view to leveraging the numerous advantages of commodity technologies in a high-performance Grid environment. A team from the NASA Glenn Research Center and Argonne National Laboratory has been studying three problems: a desktop-controlled parameter study using Excel (Microsoft Corporation); a multicomponent application using ADPAC, NPSS, and a controller program-, and an aviation safety application running about 100 jobs in near real time. The team has successfully demonstrated (1) a Common-Object- Request-Broker-Architecture- (CORBA-) to-Globus resource manager gateway that allows CORBA remote procedure calls to be used to control the submission and execution of programs on workstations and massively parallel computers, (2) a gateway from the CORBA Trader service to the Grid information service, and (3) a preliminary integration of CORBA and Grid security mechanisms. We have applied these technologies to two applications related to NPSS, namely a parameter study and a multicomponent simulation.

Particulate emission abatement for Krakow boiler houses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wysk, R.

1995-12-31

Among the many strategies for improving air quality in Krakow, one possible method is to adapt new and improved emission control technology. This project focuses on such a strategy. In order to reduce dust emissions from coal-fueled boilers, a new device called a Core Separator has been introduced in several boiler house applications. This advanced technology has been successfully demonstrated in Poland and several commercial units are now in operation. Particulate emissions from the Core Separator are typically 3 to 5 times lower than those from the best cyclone collectors. It can easily meet the new standard for dust emissionsmore » which will be in effect in Poland after 1997. The Core Separator is a completely inertial collector and is based on a unique recirculation method. It can effectively remove dust particles below 10 microns in diameter, the so-called PM-10 emissions. Its performance approaches that of fabric filters, but without the attendant cost and maintenance. It is well-suited to the industrial size boilers located in Krakow. Core Separators are now being marketed and sold by EcoInstal, one of the leading environmental firms in Poland, through a cooperative agreement with LSR Technologies.« less

Design of a dataway processor for a parallel image signal processing system

NASA Astrophysics Data System (ADS)

Nomura, Mitsuru; Fujii, Tetsuro; Ono, Sadayasu

1995-04-01

Recently, demands for high-speed signal processing have been increasing especially in the field of image data compression, computer graphics, and medical imaging. To achieve sufficient power for real-time image processing, we have been developing parallel signal-processing systems. This paper describes a communication processor called 'dataway processor' designed for a new scalable parallel signal-processing system. The processor has six high-speed communication links (Dataways), a data-packet routing controller, a RISC CORE, and a DMA controller. Each communication link operates at 8-bit parallel in a full duplex mode at 50 MHz. Moreover, data routing, DMA, and CORE operations are processed in parallel. Therefore, sufficient throughput is available for high-speed digital video signals. The processor is designed in a top- down fashion using a CAD system called 'PARTHENON.' The hardware is fabricated using 0.5-micrometers CMOS technology, and its hardware is about 200 K gates.

Investigating the Effectiveness of Computer-Assisted Language Learning (CALL) Using Google Documents in Enhancing Writing--A Study on Senior 1 Students in a Chinese Independent High School

ERIC Educational Resources Information Center

Ambrose, Regina Maria; Palpanathan, Shanthini

2017-01-01

Computer-assisted language learning (CALL) has evolved through various stages in both technology as well as the pedagogical use of technology (Warschauer & Healey, 1998). Studies show that the CALL trend has facilitated students in their English language writing with useful tools such as computer based activities and word processing. Students…

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Fieldbus technology has completed beta plant testing at Monsanto Co.`s Chocolate Bayou petrochemical complex at Alvin, Texas. The trial took place in a steam condensate recovery section of the Chocolate Bayou plant, which produces acrylonitrile, linear alkylbenzene, and a number of other petrochemical derivatives. Fieldbus is a plant communications network, or bus, that enables digital instruments to communicate with one another and with supervisory control systems. The fieldbus specification, written by the nonprofit organization Fieldbus Foundation, Austin, Texas, is called Foundation fieldbus. The beta tests at Chocolate Bayou successfully demonstrated fieldbus performance in a process control application.

Control Technology for Depainting Operations: Estimation of Life-Cycle Costs of Controlling Methylene Chloride in Aircraft-Depainting Operations Versus Alternative Processes

DTIC Science & Technology

1997-11-24

2343 Calle Del Mundo Santa Clara, CA 95054-1008 Tel.: (408)727-8282 POC: J. A. Gotterba Durr Industries Environmental Systems Division 40600...1) LESS THAN 1 IV. FIRE AND EXPLOSION DATA FLASH POINT (TEST METHOD) ABOVE 200*P AUTO IGNITION ABOVE TEMPERATURE iJfJO’P...IST METHOD, ?oo.._r T,CCT CxriNOUISHINO Mt 01A WATER AUTO IGNITION ABOVB I rLAM**BLt »•’•’"’• TEMPERATURE ^QQly | IN AIR

Vibration control with adaptive structures: MAVO FASPAS project review

NASA Astrophysics Data System (ADS)

Hanselka, Holger; Melz, Tobias; Drossel, Welf-Guntram; Sporn, Dieter; Schönecker, Andreas; Poigné, Axel

2006-03-01

The mission of the Fraunhofer Gesellschaft, one of the biggest research facilities in Germany, is to identify technologies with a high impact potential for commercial applications and to take all necessary steps to successfully promote them by performing cooperative industrial research activities. One of these technologies is called smart structures, also known as adaptive structures. Most recently, Fraunhofer decided to strategically extend its portfolio to include this technology and summarize its R&D activities in the FIT (Fraunhofer Innovation Topics) ADAPTRONIK. To improve Fraunhofer's competencies in adaptronics, especially with respect to system design and implementation, the Fraunhofer internal project MAVO FASPAS was launched in 2003. Now, after 3 years of work, the project comes to a close. This article discusses some major project results.

Potential for integrated optical circuits in advanced aircraft with fiber optic control and monitoring systems

NASA Astrophysics Data System (ADS)

Baumbick, Robert J.

1991-02-01

Fiber optic technology is expected to be used in future advanced weapons platforms as well as commercial aerospace applications. Fiber optic waveguides will be used to transmit noise free high speed data between a multitude of computers as well as audio and video information to the flight crew. Passive optical sensors connected to control computers with optical fiber interconnects will serve both control and monitoring functions. Implementation of fiber optic technology has already begun. Both the military and NASA have several programs in place. A cooperative program called FOCSI (Fiber Optic Control System Integration) between NASA Lewis and the NAVY to build environmentally test and flight demonstrate sensor systems for propul sion and flight control systems is currently underway. Integrated Optical Circuits (IOC''s) are also being given serious consideration for use in advanced aircraft sys tems. IOC''s will result in miniaturization and localization of components to gener ate detect optical signals and process them for use by the control computers. In some complex systems IOC''s may be required to perform calculations optically if the technology is ready replacing some of the electronic systems used today. IOC''s are attractive because they will result in rugged components capable of withstanding severe environments in advanced aerospace vehicles. Manufacturing technology devel oped for microelectronic integrated circuits applied to IOC''s will result in cost effective manufacturing. This paper reviews the current FOCSI program and describes the role of IOC''s in FOCSI applications.

Impact of new technologies on stress, attrition and well-being in emergency call centers: the NextGeneration 9-1-1 study protocol.

PubMed

Baseman, Janet; Revere, Debra; Painter, Ian; Stangenes, Scott; Lilly, Michelle; Beaton, Randal; Calhoun, Rebecca; Meischke, Hendrika

2018-05-04

Our public health emergency response system relies on the "first of the first responders"-the emergency call center workforce that handles the emergency needs of a public in distress. Call centers across the United States have been preparing for the "Next Generation 9-1-1" initiative, which will allow citizens to place 9-1-1 calls using a variety of digital technologies. The impacts of this initiative on a workforce that is already highly stressed is unknown. There is concern that these technology changes will increase stress, reduce job performance, contribute to maladaptive coping strategies, lower employee retention, or change morale in the workplace. Understanding these impacts to inform approaches for mitigating the health and performance risks associated with new technologies is crucial for ensuring the 911 system fulfills its mission of providing optimal emergency response to the public. Our project is an observational, prospective cohort study framed by the first new technology that will be implemented: text-to-911 calling. Emergency center call takers will be recruited nationwide. Data will be collected by online surveys distributed at each center before text-to-911 implementation; within the first month of implementation; and 6 months after implementation. Primary outcome measures are stress as measured by the Calgary Symptoms of Stress Index, use of sick leave, job performance, and job satisfaction. Primary analyses will use mixed effects regression models and mixed effects logistic regression models to estimate the change in outcome variables associated with text-to-911 implementation. Multiple secondary analyses will examine effects of stress on absenteeism; associations between technology attitudes and stress; effects of implementation on attitudes towards technology; and mitigating effects of job demands, job satisfaction, attitudes towards workplace technology and workplace support on change in stress. Our public health dependence on this workforce for our security and safety makes it imperative that the impact of technological changes such as text-to-911 are researched so appropriate intervention efforts to can be developed. Failing to protect our 9-1-1 call takers from predictable health risks would be similar to knowingly exposing field emergency responders to a toxic situation without following OSHA required training and practice standards assuring their protection.

Delegation control of multiple unmanned systems

NASA Astrophysics Data System (ADS)

Flaherty, Susan R.; Shively, Robert J.

2010-04-01

Maturing technologies and complex payloads coupled with a future objective to reduce the logistics burden of current unmanned aerial systems (UAS) operations require a change to the 2-crew employment paradigm. Increased automation and operator supervisory control of unmanned systems have been advocated to meet the objective of reducing the crew requirements, while managing future technologies. Specifically, a delegation control employment strategy has resulted in reduced workload and higher situation awareness for single operators controlling multiple unmanned systems in empirical studies1,2. Delegation control is characterized by the ability for an operator to call a single "play" that initiates prescribed default actions for each vehicle and associated sensor related to a common mission goal. Based upon the effectiveness of delegation control in simulation, the U.S. Army Aeroflightdynamics Directorate (AFDD) developed a Delegation Control (DelCon) operator interface with voice recognition implementation for play selection, real-time play modification, and play status with automation transparency to enable single operator control of multiple unmanned systems in flight. AFDD successfully demonstrated delegation control in a Troops-in-Contact mission scenario at Ft. Ord in 2009. This summary showcases the effort as a beneficial advance in single operator control of multiple UAS.

[Communication on health and safety risk control in contemporary society: an interdisciplinary approach].

PubMed

Rangel-S, Maria Ligia

2007-01-01

This paper discusses communication as a technology for risk control with health and safety protection and promotion, within the context of a "risk society". As a component of Risk Analysis, risk communication is a technology that appears in risk literature, with well defined objectives, principles and models. These aspects are described and the difficulties are stressed, taking into consideration the multiple rationales related to risks in the culture and the many different aspects of risk regulation and control in the so-called "late modernity". Consideration is also given to the complexity of the communications process, guided by theoretical and methodological discussions in the field. In order to understand the true value of the communications field for risk control with health and safety protection and promotion, this paper also offers an overview of communication theories that support discussions of this matter, proposing a critical approach to models that include the dimensions of power and culture in the context of a capitalist society.

Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rios, Orlando; Radhakrishnan, Balasubramaniam; Caravias, George

2015-03-11

Grid Logic Inc. is developing a method for sintering and melting fine metallic powders for additive manufacturing using spatially-compact, high-frequency magnetic fields called Micro-Induction Sintering (MIS). One of the challenges in advancing MIS technology for additive manufacturing is in understanding the power transfer to the particles in a powder bed. This knowledge is important to achieving efficient power transfer, control, and selective particle heating during the MIS process needed for commercialization of the technology. The project s work provided a rigorous physics-based model for induction heating of fine spherical particles as a function of frequency and particle size. This simulationmore » improved upon Grid Logic s earlier models and provides guidance that will make the MIS technology more effective. The project model will be incorporated into Grid Logic s power control circuit of the MIS 3D printer product and its diagnostics technology to optimize the sintering process for part quality and energy efficiency.« less

Control approaches for intelligent material systems -- What can we learn from nature?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertshaw, H.H.

1994-12-31

Three natural systems (human thermoregulation, enzyme-catalyzed biochemical reactions, and rivers) are examined with the intent of finding commonalties in control among these systems which may offer inspiration or guidance to the task of controlling the behavior of Intelligent Material Systems. It is observed that these natural systems act in ways not seen in technological control systems. The observations of a lack of (feedback) control, the predominance of regulation, the extremely local nature of the apparent goals, the storage of information in form (in structure), and non-numerical processing, produce a strong impression of coupled open-loop processes amidst seeming chaos almost passivelymore » producing what the author calls natural system control.« less

KSC-2011-4002

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- This tent called a "Lunarena" is a giant "sandbox," with about 60 tons of ultra-fine simulated lunar soil spread on the floor for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

Training Needs Analysis and Evaluation for New Technologies through the Use of Problem-Based Inquiry

ERIC Educational Resources Information Center

Casey, Matthew Scott; Doverspike, Dennis

2005-01-01

The analysis of calls to a help desk, in this case calls to a computer help desk, can serve as a rich source of information on the real world problems that individuals are having with the implementation of a new technology. Thus, we propose that an analysis of help desk calls, a form of problem-based inquiry, can serve as a fast and low cost means…

75 FR 67770 - Sara Lee Corporation Including On-Site Leased Workers From EDS, Hewitt Packard, Sapphire...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

..., Deductions, Collections, Call Center, Information Technology, Accounts Payable, General Accounts, Financial Accounts, Payroll, and Employee Master Data Departments Including On-Site Leased Workers From ADECCO..., Deductions, Collections, Call Center, Information Technology, Accounts Payable, General Accounts, Financial...

BMDO Technology and the Electric Utility Industry

DTIC Science & Technology

1997-01-01

use flue gas desulfurization systems, called scrubbers, to control the emissions of S02. In general, such systems allow combustion gases to pass...M) of flue gas desulfurization systems were about .0114 cents per kilowatt-hour. This small fraction of a penny translates to hundreds of millions...diluent gas , and opacity of units (the percentage of light that one can see through the flue gas ). According to requirements, CEM equipment must be

Very long baseline interferometry using a communication satellite

NASA Technical Reports Server (NTRS)

Swenson, G. W., Jr.

1975-01-01

A planned experiment is discussed in long-baseline interferometry, using the Communications Technology Satellite to transmit the base-band signal from one telescope to another for real-time correlation. A 20 megabit data rate is planned, calling for a delay-line of 10 MHz bandwidth and controllable delay up to 275 milliseconds. A number of sources will be studied on baselines from Ontario to West Virginia and California.

A Call for a Community of Practice to Assess the Impact of Emerging Technologies on Undergraduate Biology Education †

PubMed Central

Jensen, Jamie L.; Dario-Becker, Juville; Hughes, Lee E.; Amburn, D. Sue Katz; Shaw, Joyce A.

2012-01-01

Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies. PMID:23653777

A call for a community of practice to assess the impact of emerging technologies on undergraduate biology education.

PubMed

Jensen, Jamie L; Dario-Becker, Juville; Hughes, Lee E; Amburn, D Sue Katz; Shaw, Joyce A

2012-01-01

Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies.

Secure Control Systems for the Energy Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Rhett; Campbell, Jack; Hadley, Mark

2012-03-31

Schweitzer Engineering Laboratories (SEL) will conduct the Hallmark Project to address the need to reduce the risk of energy disruptions because of cyber incidents on control systems. The goals is to develop solutions that can be both applied to existing control systems and designed into new control systems to add the security measures needed to mitigate energy network vulnerabilities. The scope of the Hallmark Project contains four primary elements: 1. Technology transfer of the Secure Supervisory Control and Data Acquisition (SCADA) Communications Protocol (SSCP) from Pacific Northwest National Laboratories (PNNL) to Schweitzer Engineering Laboratories (SEL). The project shall use thismore » technology to develop a Federal Information Processing Standard (FIPS) 140-2 compliant original equipment manufacturer (OEM) module to be called a Cryptographic Daughter Card (CDC) with the ability to directly connect to any PC enabling that computer to securely communicate across serial to field devices. Validate the OEM capabilities with another vendor. 2. Development of a Link Authenticator Module (LAM) using the FIPS 140-2 validated Secure SCADA Communications Protocol (SSCP) CDC module with a central management software kit. 3. Validation of the CDC and Link Authenticator modules via laboratory and field tests. 4. Creation of documents that record the impact of the Link Authenticator to the operators of control systems and on the control system itself. The information in the documents can assist others with technology deployment and maintenance.« less

Cross Support Transfer Service (CSTS) Framework Library

NASA Technical Reports Server (NTRS)

Ray, Timothy

2014-01-01

Within the Consultative Committee for Space Data Systems (CCSDS), there is an effort to standardize data transfer between ground stations and control centers. CCSDS plans to publish a collection of transfer services that will each address the transfer of a particular type of data (e.g., tracking data). These services will be called Cross Support Transfer Services (CSTSs). All of these services will make use of a common foundation that is called the CSTS Framework. This library implements the User side of the CSTS Framework. "User side" means that the library performs the role that is typically expected of the control center. This library was developed in support of the Goddard Data Standards program. This technology could be applicable for control centers, and possibly for use in control center simulators needed to test ground station capabilities. The main advantages of this implementation are its flexibility and simplicity. It provides the framework capabilities, while allowing the library user to provide a wrapper that adapts the library to any particular environment. The main purpose of this implementation was to support the inter-operability testing required by CCSDS. In addition, it is likely that the implementation will be useful within the Goddard mission community (for use in control centers).

An approach to optimal semi-active control of vibration energy harvesting based on MEMS

NASA Astrophysics Data System (ADS)

Rojas, Rafael A.; Carcaterra, Antonio

2018-07-01

In this paper the energy harvesting problem involving typical MEMS technology is reduced to an optimal control problem, where the objective function is the absorption of the maximum amount of energy in a given time interval from a vibrating environment. The interest here is to identify a physical upper bound for this energy storage. The mathematical tool is a new optimal control called Krotov's method, that has not yet been applied to engineering problems, except in quantum dynamics. This approach leads to identify new maximum bounds to the energy harvesting performance. Novel MEMS-based device control configurations for vibration energy harvesting are proposed with particular emphasis to piezoelectric, electromagnetic and capacitive circuits.

Cognitive issues in autonomous spacecraft-control operations: An investigation of software-mediated decision making in a scaled environment

NASA Astrophysics Data System (ADS)

Murphy, Elizabeth Drummond

As advances in technology are applied in complex, semi-automated domains, human controllers are distanced from the controlled process. This physical and psychological distance may both facilitate and degrade human performance. To investigate cognitive issues in spacecraft ground-control operations, the present experimental research was undertaken. The primary issue concerned the ability of operations analysts who do not monitor operations to make timely, accurate decisions when autonomous software calls for human help. Another key issue involved the potential effects of spatial-visualization ability (SVA) in environments that present data in graphical formats. Hypotheses were derived largely from previous findings and predictions in the literature. Undergraduate psychology students were assigned at random to a monitoring condition or an on-call condition in a scaled environment. The experimental task required subjects to decide on the veracity of a problem diagnosis delivered by a software process on-board a simulated spacecraft. To support decision-making, tabular and graphical data displays presented information on system status. A level of software confidence in the problem diagnosis was displayed, and subjects reported their own level of confidence in their decisions. Contrary to expectations, the performance of on-call subjects did not differ significantly from that of continuous monitors. Analysis yielded a significant interaction of sex and condition: Females in the on-call condition had the lowest mean accuracy. Results included a preference for bar charts over line graphs and faster performance with tables than with line graphs. A significant correlation was found between subjective confidence and decision accuracy. SVA was found to be predictive of accuracy but not speed; and SVA was found to be a stronger predictor of performance for males than for females. Low-SVA subjects reported that they relied more on software confidence than did medium- or high-SVA subjects. These and other findings have implications for the design of user interfaces to support human decision-making in on-call situations and to accommodate low-SVA users.

77 FR 18798 - President's Council of Advisors on Science and Technology (PCAST)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... on Science and Technology (PCAST), and describes the functions of the Council. Notice of this meeting... purpose of this conference call is to discuss PCAST's Advanced Manufacturing Partnership report. DATES... the conference call, PCAST will discuss its Advanced Manufacturing Partnership report. Additional...

Exploring EFL Teachers' CALL Knowledge and Competencies: In-Service Program Perspectives

ERIC Educational Resources Information Center

Liu, Mei-Hui; Kleinsasser, Robert C.

2015-01-01

This article describes quantitative and qualitative data providing perspectives on how six English as a Foreign Language (EFL) vocational high school teachers perceived CALL knowledge and competencies in a yearlong technology-enriched professional development program. The teachers' developing technological pedagogical content knowledge (TPACK) and…

New operational technology of intrauterine ventilation the fetus lungs by breathing gas

NASA Astrophysics Data System (ADS)

Urakov, A. L.; Nikityuk, D. B.; Urakova, N. A.; Kasankin, A. A.; Chernova, L. V.; Dementiev, V. B.

2015-11-01

New operational technology for elimination intrauterine hypoxia and asphyxia of the fetus using endoscopic artificial ventilation lungs by respiratory gas was developed. For intrauterine ventilation of fetal lung it is proposed to enter into the uterus a special breathing mask and wear it on the head of the fetus using the original endoscopic technology. The breathing mask, developed by us is connected with external breathing apparatus with a hose. The device is called "intrauterine aqualung". Intrauterine aqualung includes a ventilator and breathing circuit with a special fold-out breathing mask that is put on inside the uterus on the head of fetus like a mesh hat. Controlled by ultrasound the technology of the introduction of the mask inside of the uterus through the natural opening in the cervix and technology of putting on the respiratory mask on the head of the fetus with its head previa were developed. The technology intrauterine ventilation of the fetus lungs by respiratory gas was developed.

The SILEX experiment system operations

NASA Technical Reports Server (NTRS)

Demelenne, B.

1994-01-01

The European Space Agency is going to conduct an inter orbit link experiment which will connect a low Earth orbiting satellite and a Geostationary satellite via optical terminals. This experiment has been called SILEX (Semiconductor Inter satellite Link EXperiment). Two payloads will be built. One called PASTEL (PASsager de TELecommunication) will be embarked on the French Earth observation satellite SPOT4. The future European experimental data relay satellite ARTEMIS (Advanced Relay and TEchnology MISsion) will carry the OPALE terminal (Optical PAyload Experiment). The principal characteristic of the mission is a 50 Megabits flow of data transmitted via the optical satellite link. The relay satellite will route the data via its feeder link thus permitting a real time reception in the European region of images taken by the observation satellite. The PASTEL terminal has been designed to cover up to 9 communication sessions per day with an average of 5. The number of daily contact opportunities with the low earth orbiting satellite will be increased and the duration will be much longer than the traditional passes over a ground station. The terminals have an autonomy of 24 hours with respect to ground control. Each terminal will contain its own orbit model and that of its counter terminal for orbit prediction and for precise computation of pointing direction. Due to the very narrow field of view of the communication laser beam, the orbit propagation calculation needs to be done with a very high accuracy. The European Space Agency is responsible for the operation of both terminals. A PASTEL Mission Control System (PMCS) is being developed to control the PASTEL terminal on board SPOT4. The PMCS will interface with the SPOT4 Control Centre for the execution of the PASTEL operations. The PMCS will also interface with the ARTEMIS Mission Control System for the planning and the coordination of the operation. It is the first time that laser technology will be used to support inter-satellite links in Europe. Due to the complexity and experimental character of this new optical technology, the SILEX experiment control facilities will be designed to allow as much operational flexibility as possible.

On the Edge: Intelligent CALL in the 1990s.

ERIC Educational Resources Information Center

Underwood, John

1989-01-01

Examines the possibilities of developing computer-assisted language learning (CALL) based on the best of modern technology, arguing that artificial intelligence (AI) strategies will radically improve the kinds of exercises that can be performed. Recommends combining AI technology with other tools for delivering instruction, such as simulation and…

Principles of Technology Curriculum Guide. Curriculum Development. Bulletin 1812.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document describes minimum competencies and suggested student activities for a seven-unit course called Principles of Technology. The instructional units are called Force, Work, Rate, Resistance, Energy, Power, and Force Transformers. The first section of the document contains information on how to use the guide, goals for industrial…

A Likelihood-Based Framework for Association Analysis of Allele-Specific Copy Numbers.

PubMed

Hu, Y J; Lin, D Y; Sun, W; Zeng, D

2014-10-01

Copy number variants (CNVs) and single nucleotide polymorphisms (SNPs) co-exist throughout the human genome and jointly contribute to phenotypic variations. Thus, it is desirable to consider both types of variants, as characterized by allele-specific copy numbers (ASCNs), in association studies of complex human diseases. Current SNP genotyping technologies capture the CNV and SNP information simultaneously via fluorescent intensity measurements. The common practice of calling ASCNs from the intensity measurements and then using the ASCN calls in downstream association analysis has important limitations. First, the association tests are prone to false-positive findings when differential measurement errors between cases and controls arise from differences in DNA quality or handling. Second, the uncertainties in the ASCN calls are ignored. We present a general framework for the integrated analysis of CNVs and SNPs, including the analysis of total copy numbers as a special case. Our approach combines the ASCN calling and the association analysis into a single step while allowing for differential measurement errors. We construct likelihood functions that properly account for case-control sampling and measurement errors. We establish the asymptotic properties of the maximum likelihood estimators and develop EM algorithms to implement the corresponding inference procedures. The advantages of the proposed methods over the existing ones are demonstrated through realistic simulation studies and an application to a genome-wide association study of schizophrenia. Extensions to next-generation sequencing data are discussed.

The Geek Perspective: Answering the Call for Advanced Technology in Research Inquiry Related to Pediatric Brain Injury and Motor Disability.

PubMed

Wininger, Michael; Pidcoe, Peter

2017-10-01

The Academy of Pediatric Physical Therapy Research Summit IV issued a Call to Action for community-wide intensification of a research enterprise in inquiries related to pediatric brain injury and motor disability by way of technological integration. But the barriers can seem high, and the pathways to integrative clinical research can seem poorly marked. Here, we answer the Call by providing framework to 3 objectives: (1) instrumentation, (2) biometrics and study design, and (3) data analytics. We identify emergent cases where this Call has been answered and advocate for others to echo the Call both in highly visible physical therapy venues and in forums where the audience is diverse.

KSC-2011-3939

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3941

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3946

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3944

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3940

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3947

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3943

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3945

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3942

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

KSC-2011-3948

NASA Image and Video Library

2011-05-23

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Cory Huston

Students Help a Teacher Called to Active Duty: What a Great Feeling to Have a Group of Students Who Are Excited and Want to Help a Teacher in Need so Many Miles from Home

ERIC Educational Resources Information Center

Yuill, Ron

2005-01-01

The author shares how his technology education students at Tecumseh Middle School help his former student from a Purdue class, Ryan Smith, who was called to active military duty. Ryan was teaching technology education at Lafayette Jefferson High School when he was called by the military in the fall of 2004 to report to active duty. Before…

Linking CALL and SLA: Using the IRIS Database to Locate Research Instruments

ERIC Educational Resources Information Center

Handley, Zöe; Marsden, Emma

2014-01-01

To establish an evidence base for future computer-assisted language learning (CALL) design, CALL research needs to move away from CALL versus non-CALL comparisons, and focus on investigating the differential impact of individual coding elements, that is, specific features of a technology which might have an impact on learning (Pederson, 1987).…

Active Vibration Control for Helicopter Interior Noise Reduction Using Power Minimization

NASA Technical Reports Server (NTRS)

Mendoza, J.; Chevva, K.; Sun, F.; Blanc, A.; Kim, S. B.

2014-01-01

This report describes work performed by United Technologies Research Center (UTRC) for NASA Langley Research Center (LaRC) under Contract NNL11AA06C. The objective of this program is to develop technology to reduce helicopter interior noise resulting from multiple gear meshing frequencies. A novel active vibration control approach called Minimum Actuation Power (MAP) is developed. MAP is an optimal control strategy that minimizes the total input power into a structure by monitoring and varying the input power of controlling sources. MAP control was implemented without explicit knowledge of the phasing and magnitude of the excitation sources by driving the real part of the input power from the controlling sources to zero. It is shown that this occurs when the total mechanical input power from the excitation and controlling sources is a minimum. MAP theory is developed for multiple excitation sources with arbitrary relative phasing for single or multiple discrete frequencies and controlled by a single or multiple controlling sources. Simulations and experimental results demonstrate the feasibility of MAP for structural vibration reduction of a realistic rotorcraft interior structure. MAP control resulted in significant average global vibration reduction of a single frequency and multiple frequency excitations with one controlling actuator. Simulations also demonstrate the potential effectiveness of the observed vibration reductions on interior radiated noise.

From Apollo to Cognac

NASA Technical Reports Server (NTRS)

1980-01-01

Shell Oil Company started oil and gas production from a new offshore platform called Cognac located in the Gulf of Mexico. It is the world's tallest oil platform, slightly taller than the Empire State Building. The highly complex job of installing Cognac's support "jacket" under water more than a thousand feet deep was directed from a barge-based control center. To enable crews to practice in advance difficult tasks never before accomplished, Honeywell, adapting NASA's Apollo technology, developed a system for simulating the various underwater operations. In training sessions, displays and controls reacted exactly as they would in real operation.

Faster Finances

NASA Technical Reports Server (NTRS)

1976-01-01

TRW has applied the Apollo checkout procedures to retail-store and bank-transaction systems, as well as to control systems for electric power transmission grids -- reducing the chance of power blackouts. Automatic checkout equipment for Apollo Spacecraft is one of the most complex computer systems in the world. Used to integrate extensive Apollo checkout procedures from manufacture to launch, it has spawned major advances in computer systems technology. Store and bank credit system has caused significant improvement in speed and accuracy of transactions, credit authorization, and inventory control. A similar computer service called "Validata" is used nationwide by airlines, airline ticket offices, car rental agencies, and hotels.

A machine learning model to determine the accuracy of variant calls in capture-based next generation sequencing.

PubMed

van den Akker, Jeroen; Mishne, Gilad; Zimmer, Anjali D; Zhou, Alicia Y

2018-04-17

Next generation sequencing (NGS) has become a common technology for clinical genetic tests. The quality of NGS calls varies widely and is influenced by features like reference sequence characteristics, read depth, and mapping accuracy. With recent advances in NGS technology and software tools, the majority of variants called using NGS alone are in fact accurate and reliable. However, a small subset of difficult-to-call variants that still do require orthogonal confirmation exist. For this reason, many clinical laboratories confirm NGS results using orthogonal technologies such as Sanger sequencing. Here, we report the development of a deterministic machine-learning-based model to differentiate between these two types of variant calls: those that do not require confirmation using an orthogonal technology (high confidence), and those that require additional quality testing (low confidence). This approach allows reliable NGS-based calling in a clinical setting by identifying the few important variant calls that require orthogonal confirmation. We developed and tested the model using a set of 7179 variants identified by a targeted NGS panel and re-tested by Sanger sequencing. The model incorporated several signals of sequence characteristics and call quality to determine if a variant was identified at high or low confidence. The model was tuned to eliminate false positives, defined as variants that were called by NGS but not confirmed by Sanger sequencing. The model achieved very high accuracy: 99.4% (95% confidence interval: +/- 0.03%). It categorized 92.2% (6622/7179) of the variants as high confidence, and 100% of these were confirmed to be present by Sanger sequencing. Among the variants that were categorized as low confidence, defined as NGS calls of low quality that are likely to be artifacts, 92.1% (513/557) were found to be not present by Sanger sequencing. This work shows that NGS data contains sufficient characteristics for a machine-learning-based model to differentiate low from high confidence variants. Additionally, it reveals the importance of incorporating site-specific features as well as variant call features in such a model.

Examination of wireless technology to improve nurse communication, response time to bed alarms, and patient safety.

PubMed

Guarascio-Howard, Linda

2011-01-01

A medical-surgical unit in a southwestern United States hospital examined the results of adding wireless communication technology to assist nurses in identifying patient bed status changes and enhancing team communication. Following the addition of wireless communication, response time to patient calls and the number of nurse-initiated communications were compared to pre-wireless calls and response time sampling period. In the baseline study, nurse-initiated communications and response time to patient calls were investigated for a team nursing model (Guarascio-Howard & Malloch, 2007). At this time, technology consisted of a nurse call system and telephones located at each decentralized nurse station and health unit coordinator (HUC) station. For this follow-up study, a wireless device was given to nurses and their team members following training on device use and privacy issues. Four registered nurses (RNs) were shadowed for 8 hours (32 hours total) before and after the introduction of the wireless devices. Data were collected regarding patient room visits, number of patient calls, bed status calls, response time to calls, and the initiator of the communication episodes. Follow-up study response time to calls significantly decreased (t-test p = .03). RNs and licensed practical nurses responded to bed status calls in less than 1 minute-62% of the 37 calls. Communication results indicated a significant shift (One Proportion Z Test) in RN-initiated communications, suggesting an enhanced ability to communicate with team members and to assist in monitoring patient status. Patient falls trended downward, although not significantly (p > .05), for a 6-month period of wireless technology use compared to the same period the previous year. The addition of a wireless device has advantages in team nursing, namely increasing communication with staff members and decreasing response time to patient and bed status calls. Limitations of the study included a change in caregiver team members and issues regarding wireless device and locator badge compliance. Administrative issues that arose during this field study included bed and cable maintenance, device battery charging, and the training of new and floating team members.

Mission-based Scenario Research: Experimental Design And Analysis

DTIC Science & Technology

2012-01-01

neurotechnologies called Brain-Computer Interaction Technologies. 15. SUBJECT TERMS neuroimaging, EEG, task loading, neurotechnologies , ground... neurotechnologies called Brain-Computer Interaction Technologies. INTRODUCTION Imagine a system that can identify operator fatigue during a long-term...BCIT), a class of neurotechnologies , that aim to improve task performance by incorporating measures of brain activity to optimize the interactions

Solar plus: Optimization of distributed solar PV through battery storage and dispatchable load in residential buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen

As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less

Solar plus: Optimization of distributed solar PV through battery storage and dispatchable load in residential buildings

DOE PAGES

O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen; ...

2018-01-11

As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less

Security Implications of OPC, OLE, DCOM, and RPC in Control Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2006-01-01

OPC is a collection of software programming standards and interfaces used in the process control industry. It is intended to provide open connectivity and vendor equipment interoperability. The use of OPC technology simplifies the development of control systems that integrate components from multiple vendors and support multiple control protocols. OPC-compliant products are available from most control system vendors, and are widely used in the process control industry. OPC was originally known as OLE for Process Control; the first standards for OPC were based on underlying services in the Microsoft Windows computing environment. These underlying services (OLE [Object Linking and Embedding],more » DCOM [Distributed Component Object Model], and RPC [Remote Procedure Call]) have been the source of many severe security vulnerabilities. It is not feasible to automatically apply vendor patches and service packs to mitigate these vulnerabilities in a control systems environment. Control systems using the original OPC data access technology can thus inherit the vulnerabilities associated with these services. Current OPC standardization efforts are moving away from the original focus on Microsoft protocols, with a distinct trend toward web-based protocols that are independent of any particular operating system. However, the installed base of OPC equipment consists mainly of legacy implementations of the OLE for Process Control protocols.« less

Centrifugal shot blasting. Innovative technology summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1999-07-01

At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer.

Maker Cultures and the Prospects for Technological Action.

PubMed

Nascimento, Susana; Pólvora, Alexandre

2018-06-01

Supported by easier and cheaper access to tools and expanding communities, maker cultures are pointing towards the ideas of (almost) everyone designing, creating, producing and distributing renewed, new and improved products, machines, things or artefacts. A careful analysis of the assumptions and challenges of maker cultures emphasizes the relevance of what may be called technological action, that is, active and critical interventions regarding the purposes and applications of technologies within ordinary lives, thus countering the deterministic trends of current directions of technology. In such transformative potential, we will explore a set of elements what is and could be technological action through snapshots of maker cultures based on the empirical research conducted in three particular contexts: the Fab Lab Network, Maker Media core outputs and initiatives such as Maker Faires, and the Open Source Hardware Association (OSHWA). Elements such as control and empowerment through material engagement, openness and sharing, and social, cultural, political and ethical values of the common good in topics such as diversity, sustainability and transparency, are critically analysed.

StegoWall: blind statistical detection of hidden data

NASA Astrophysics Data System (ADS)

Voloshynovskiy, Sviatoslav V.; Herrigel, Alexander; Rytsar, Yuri B.; Pun, Thierry

2002-04-01

Novel functional possibilities, provided by recent data hiding technologies, carry out the danger of uncontrolled (unauthorized) and unlimited information exchange that might be used by people with unfriendly interests. The multimedia industry as well as the research community recognize the urgent necessity for network security and copyright protection, or rather the lack of adequate law for digital multimedia protection. This paper advocates the need for detecting hidden data in digital and analog media as well as in electronic transmissions, and for attempting to identify the underlying hidden data. Solving this problem calls for the development of an architecture for blind stochastic hidden data detection in order to prevent unauthorized data exchange. The proposed architecture is called StegoWall; its key aspects are the solid investigation, the deep understanding, and the prediction of possible tendencies in the development of advanced data hiding technologies. The basic idea of our complex approach is to exploit all information about hidden data statistics to perform its detection based on a stochastic framework. The StegoWall system will be used for four main applications: robust watermarking, secret communications, integrity control and tamper proofing, and internet/network security.

PILOT: An intelligent distributed operations support system

NASA Technical Reports Server (NTRS)

Rasmussen, Arthur N.

1993-01-01

The Real-Time Data System (RTDS) project is exploring the application of advanced technologies to the real-time flight operations environment of the Mission Control Centers at NASA's Johnson Space Center. The system, based on a network of engineering workstations, provides services such as delivery of real time telemetry data to flight control applications. To automate the operation of this complex distributed environment, a facility called PILOT (Process Integrity Level and Operation Tracker) is being developed. PILOT comprises a set of distributed agents cooperating with a rule-based expert system; together they monitor process operation and data flows throughout the RTDS network. The goal of PILOT is to provide unattended management and automated operation under user control.

Project IMPACT Pilot Report: Feasibility of Implementing a Hospital-to-Home Transition Bundle.

PubMed

Mallory, Leah A; Osorio, Snezana Nena; Prato, B Stephen; DiPace, Jennifer; Schmutter, Lisa; Soung, Paula; Rogers, Amanda; Woodall, William J; Burley, Kayla; Gage, Sandra; Cooperberg, David

2017-03-01

To improve hospital to home transitions, a 4-element pediatric patient-centered transition bundle was developed, including: a transition readiness checklist; predischarge teach-back education; timely and complete written handoff to the primary care provider; and a postdischarge phone call. The objective of this study was to demonstrate the feasibility of bundle implementation and report initial outcomes at 4 pilot sites. Outcome measures included postdischarge caregiver ability to teach-back key home management information and 30-day reuse rates. A multisite, observational time series using multiple planned sequential interventions to implement bundle components with non-technology-supported and technology-supported patients. Data were collected via electronic health record reviews and during postdischarge phone calls. Statistical process control charts were used to assess outcomes. Four pilot sites implemented the bundle between January 2014 and May 2015 for 2601 patients, of whom 1394 had postdischarge telephone encounters. Improvement was noted in the implementation of all bundle elements with the transitions readiness checklist posing the greatest feasibility challenge. Phone contact connection rates were 69%. Caregiver ability to teach-back essential home management information postdischarge improved from 18% to 82%. No improvement was noted in reuse rates, which differed dramatically between technology-supported and non-technology-supported patients. A pediatric care transition bundle was successfully tested and implemented, as demonstrated by improvement in all process measures, as well as caregiver home management skills. Important considerations for successful implementation and evaluation of the discharge bundle include the role of local context, electronic health record integration, and subgroup analysis for technology-supported patients. Copyright © 2017 by the American Academy of Pediatrics.

Protocol: a multi-level intervention program to reduce stress in 9-1-1 telecommunicators.

PubMed

Meischke, Hendrika; Lilly, Michelle; Beaton, Randal; Calhoun, Rebecca; Tu, Ann; Stangenes, Scott; Painter, Ian; Revere, Debra; Baseman, Janet

2018-05-02

Nationwide, emergency response systems depend on 9-1-1 telecommunicators to prioritize, triage, and dispatch assistance to those in distress. 9-1-1 call center telecommunicators (TCs) are challenged by acute and chronic workplace stressors: tense interactions with citizen callers in crisis; overtime; shift-work; ever-changing technologies; and negative work culture, including co-worker conflict. This workforce is also subject to routine exposures to secondary traumatization while handling calls involving emergency situations and while making time urgent, high stake decisions over the phone. Our study aims to test the effectiveness of a multi-part intervention to reduce stress in 9-1-1 TCs through an online mindfulness training and a toolkit containing workplace stressor reduction resources. The study employs a randomized controlled trial design with three data collection points. The multi-part intervention includes an individual-level online mindfulness training and a call center-level organizational stress reduction toolkit. 160 TCs will be recruited from 9-1-1 call centers, complete a baseline survey at enrollment, and are randomly assigned to an intervention or a control group. Intervention group participants will start a 7-week online mindfulness training developed in-house and tailored to 9-1-1 TCs and their call center environment; control participants will be "waitlisted" and start the training after the study period ends. Following the intervention group's completion of the mindfulness training, all participants complete a second survey. Next, the online toolkit with call-center wide stress reduction resources is made available to managers of all participating call centers. After 3 months, a third survey will be completed by all participants. The primary outcome is 9-1-1 TCs' self-reported symptoms of stress at three time points as measured by the C-SOSI (Calgary Symptoms of Stress Inventory). Secondary outcomes will include: perceptions of social work environment (measured by metrics of social support and network conflict); mindfulness; and perceptions of social work environment and mindfulness as mediators of stress reduction. This study will evaluate the effectiveness of an online mindfulness training and call center-wide stress reduction toolkit in reducing self-reported stress in 9-1-1 TCs. The results of this study will add to the growing body of research on worksite stress reduction programs. ClinicalTrials.gov Registration Number: NCT02961621 Registered on November 7, 2016 (retrospectively registered).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shwehdi, M.H.; Khan, A.Z.

Building automation technology is rapidly developing towards more reliable communication systems, devices that control electronic equipments. These equipment if controlled leads to efficient energy management, and savings on the monthly electricity bill. Power Line communication (PLC) has been one of the dreams of the electronics industry for decades, especially for building automation. It is the purpose of this paper to demonstrate communication methods among electronic control devices through an AC power line carrier within the buildings for more efficient energy control. The paper outlines methods of communication over a powerline, namely the X-10 and CE bus. It also introduces themore » spread spectrum technology as to increase speed to 100--150 times faster than the X-10 system. The powerline carrier has tremendous applications in the field of building automation. The paper presents an attempt to realize a smart house concept, so called, in which all home electronic devices from a coffee maker to a water heater microwave to chaos robots will be utilized by an intelligent network whenever one wishes to do so. The designed system may be applied very profitably to help in energy management for both customer and utility.« less

DAQ application of PC oscilloscope for chaos fiber-optic fence system based on LabVIEW

NASA Astrophysics Data System (ADS)

Lu, Manman; Fang, Nian; Wang, Lutang; Huang, Zhaoming; Sun, Xiaofei

2011-12-01

In order to obtain simultaneously high sample rate and large buffer in data acquisition (DAQ) for a chaos fiber-optic fence system, we developed a double-channel high-speed DAQ application of a digital oscilloscope of PicoScope 5203 based on LabVIEW. We accomplished it by creating call library function (CLF) nodes to call the DAQ functions in the two dynamic link libraries (DLLs) of PS5000.dll and PS5000wrap.dll provided by Pico Technology Company. The maximum real-time sample rate of the DAQ application can reach 1GS/s. We can control the resolutions of the application at the sample time and data amplitudes by changing their units in the block diagram, and also control the start and end times of the sampling operations. The experimental results show that the application has enough high sample rate and large buffer to meet the demanding DAQ requirements of the chaos fiber-optic fence system.

Actualities and Development of Heavy-Duty CNC Machine Tool Thermal Error Monitoring Technology

NASA Astrophysics Data System (ADS)

Zhou, Zu-De; Gui, Lin; Tan, Yue-Gang; Liu, Ming-Yao; Liu, Yi; Li, Rui-Ya

2017-09-01

Thermal error monitoring technology is the key technological support to solve the thermal error problem of heavy-duty CNC (computer numerical control) machine tools. Currently, there are many review literatures introducing the thermal error research of CNC machine tools, but those mainly focus on the thermal issues in small and medium-sized CNC machine tools and seldom introduce thermal error monitoring technologies. This paper gives an overview of the research on the thermal error of CNC machine tools and emphasizes the study of thermal error of the heavy-duty CNC machine tool in three areas. These areas are the causes of thermal error of heavy-duty CNC machine tool and the issues with the temperature monitoring technology and thermal deformation monitoring technology. A new optical measurement technology called the "fiber Bragg grating (FBG) distributed sensing technology" for heavy-duty CNC machine tools is introduced in detail. This technology forms an intelligent sensing and monitoring system for heavy-duty CNC machine tools. This paper fills in the blank of this kind of review articles to guide the development of this industry field and opens up new areas of research on the heavy-duty CNC machine tool thermal error.

A Model Program in Science, Mathematics, and Technology. Final Report TP87-9.

ERIC Educational Resources Information Center

McDowell, Ceasar; And Others

Over the past 5 years parents, industry leaders, and policy makers have called repeatedly for the improvement of mathematics and science education in urban schools and for measures to insure that all students are "technologically literate." Various efforts at the national, state, and local levels have emerged in response to these calls, with…

Use of Web Technology to Access and Update College Plans

ERIC Educational Resources Information Center

Valeau, Edward J.; Luan, Jing

2007-01-01

In this study, the process and outcome of a web-based planning application, called Ports of Call, are discussed. The application allows college management to create, edit, and report out activities relating to college plans, all through a web browser. Its design was based on best practices in modern web technology and the application can be easily…

CALLing All Foreign Language Teachers: Computer-Assisted Language Learning in the Classroom

ERIC Educational Resources Information Center

Erben, Tony, Ed.; Sarieva, Iona, Ed.

2008-01-01

This book is a comprehensive guide to help foreign language teachers use technology in their classrooms. It offers the best ways to integrate technology into teaching for student-centered learning. CALL Activities include: Email; Building a Web site; Using search engines; Powerpoint; Desktop publishing; Creating sound files; iMovie; Internet chat;…

Science-Technology-Society (STS): A New Paradigm in Science Education

ERIC Educational Resources Information Center

Mansour, Nasser

2009-01-01

Changes in the past two decades of goals for science education in schools have induced new orientations in science education worldwide. One of the emerging complementary approaches was the science-technology-society (STS) movement. STS has been called the current megatrend in science education. Others have called it a paradigm shift for the field…

Students' and Instructors' Attitudes toward the Use of CALL in Foreign Language Teaching and Learning

ERIC Educational Resources Information Center

Wiebe, Grace; Kabata, Kaori

2010-01-01

This study examines the effects of educational technologies on the attitudes of both the instructors and the students. The results indicate that there is a discrepancy between the students' awareness of the instructors' goals for using new technologies and the importance instructors placed on computer assisted language learning (CALL). The data…

The Learning Preferences of Digital Learners in K-12 Schools in China

ERIC Educational Resources Information Center

Yang, Junfeng; Huang, Ronghuai; Kinshuk

2016-01-01

Students grown up with digital technology and Internet are called digital natives or net generation. All others, who grew up without so much immersion with digital technologies are called digital immigrants. Researchers held different ideas on whether a new generation of learners existed. One of the foci of the debate is on the appropriateness of…

Answering Damarin's Call: How iOS Apps Approach Diversity, Equity, and Multiculturalism

ERIC Educational Resources Information Center

Cherner, Todd; Fegely, Alex

2018-01-01

In 1998, Suzanne Damarin put forward a call for technologists and multicultural educators to work together to create technologies that promote inclusiveness and equity for students. As significant technological advancements have happened along with major changes in educational policy over the past 20 years, this study set out to examine if…

Cost-effective (gaming) motion and balance devices for functional assessment: Need or hype?

PubMed

Bonnechère, B; Jansen, B; Van Sint Jan, S

2016-09-06

In the last decade, technological advances in the gaming industry have allowed the marketing of hardware for motion and balance control that is based on technological concepts similar to scientific and clinical equipment. Such hardware is attractive to researchers and clinicians for specific applications. However, some questions concerning their scientific value and the range of future potential applications have yet to be answered. This article attempts to present an objective analysis about the pros and cons of using such hardware for scientific and clinical purposes and calls for a constructive discussion based on scientific facts and practical clinical requests that are emerging from application fields. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nanocharacterization Challenges in a Changing Microelectronics Landscape

NASA Astrophysics Data System (ADS)

Brilloüt, Michel

2011-11-01

As the microelectronics industry enters the "nano"-era new challenges emerge. Traditional scaling of the MOS transistor faces major obstacles in fulfilling "Moore's law". New features like strain and new materials (e.g. high k—metal gate stack) are introduced in order to sustain performance increases. For a better electrostatic control, devices will use the third dimension, e.g., in gate-all-around nanowire structures. Due to the escalating cost and complexity of sub-28 nm technologies fewer industrial players can afford the development and production of advanced CMOS processes and many companies acknowledge the fact that the value in products can also be obtained in using more diversified non-digital technologies (the so-called "More-than-Moore" domain). This evolving landscape brings new requirements—discussed in this paper—in terms of physical characterization of technologies and devices.

Space Age Spuds

NASA Technical Reports Server (NTRS)

2000-01-01

American Ag-Tech International, Ltd. developed a system called Quantum Tubers through the Wisconsin Center for Space Automation and Robotics (a NASA-sponsored Commercial Space Center). Using computerization and technologies originally intended for growing plants in space, the company developed a growth chamber that accelerates plant growth and is free of plant pathogens. The chamber is used to grow minitubers, which serve as nuclear seed stock for potatoes. Using lighting technology, temperature and humidity controls, and automation technology, the minituber can be generated in one closed facility with out much labor handling. This means they can be grown year round in extreme environments. The system eliminates the need for multiple generations of seed and eliminates exposure to pathogens, disease and pests. The Quantum Tubers system can produce 10-20 million tubers throughout the year, about equal to the world's supply of this generation seed stock.

Support and Assessment for Fall Emergency Referrals (SAFER) 2: a cluster randomised trial and systematic review of clinical effectiveness and cost-effectiveness of new protocols for emergency ambulance paramedics to assess older people following a fall with referral to community-based care when appropriate.

PubMed

Snooks, Helen A; Anthony, Rebecca; Chatters, Robin; Dale, Jeremy; Fothergill, Rachael; Gaze, Sarah; Halter, Mary; Humphreys, Ioan; Koniotou, Marina; Logan, Phillipa; Lyons, Ronan; Mason, Suzanne; Nicholl, Jon; Peconi, Julie; Phillips, Ceri; Phillips, Judith; Porter, Alison; Siriwardena, A Niroshan; Smith, Graham; Toghill, Alun; Wani, Mushtaq; Watkins, Alan; Whitfield, Richard; Wilson, Lynsey; Russell, Ian T

2017-03-01

Emergency calls are frequently made to ambulance services for older people who have fallen, but ambulance crews often leave patients at the scene without any ongoing care. We evaluated a new clinical protocol which allowed paramedics to assess older people who had fallen and, if appropriate, refer them to community-based falls services. To compare outcomes, processes and costs of care between intervention and control groups; and to understand factors which facilitate or hinder use. Cluster randomised controlled trial. Participating paramedics at three ambulance services in England and Wales were based at stations randomised to intervention or control arms. Participants were aged 65 years and over, attended by a study paramedic for a fall-related emergency service call, and resident in the trial catchment areas. Intervention paramedics received a clinical protocol with referral pathway, training and support to change practice. Control paramedics continued practice as normal. The primary outcome comprised subsequent emergency health-care contacts (emergency admissions, emergency department attendances, emergency service calls) or death at 1 month and 6 months. Secondary outcomes included pathway of care, ambulance service operational indicators, self-reported outcomes and costs of care. Those assessing outcomes remained blinded to group allocation. Across sites, 3073 eligible patients attended by 105 paramedics from 14 ambulance stations were randomly allocated to the intervention group, and 2841 eligible patients attended by 110 paramedics from 11 stations were randomly allocated to the control group. After excluding dissenting and unmatched patients, 2391 intervention group patients and 2264 control group patients were included in primary outcome analyses. We did not find an effect on our overall primary outcome at 1 month or 6 months. However, further emergency service calls were reduced at both 1 month and 6 months; a smaller proportion of patients had made further emergency service calls at 1 month (18.5% vs. 21.8%) and the rate per patient-day at risk at 6 months was lower in the intervention group (0.013 vs. 0.017). Rate of conveyance to emergency department at index incident was similar between groups. Eight per cent of trial eligible patients in the intervention arm were referred to falls services by attending paramedics, compared with 1% in the control arm. The proportion of patients left at scene without further care was lower in the intervention group than in the control group (22.6% vs. 30.3%). We found no differences in duration of episode of care or job cycle. No adverse events were reported. Mean cost of the intervention was £17.30 per patient. There were no significant differences in mean resource utilisation, utilities at 1 month or 6 months or quality-adjusted life-years. In total, 58 patients, 25 paramedics and 31 stakeholders participated in focus groups or interviews. Patients were very satisfied with assessments carried out by paramedics. Paramedics reported that the intervention had increased their confidence to leave patients at home, but barriers to referral included patients' social situations and autonomy. Findings indicate that this new pathway may be introduced by ambulance services at modest cost, without risk of harm and with some reductions in further emergency calls. However, we did not find evidence of improved health outcomes or reductions in overall NHS emergency workload. Further research is necessary to understand issues in implementation, the costs and benefits of e-trials and the performance of the modified Falls Efficacy Scale. Current Controlled Trials ISRCTN60481756 and PROSPERO CRD42013006418. This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment ; Vol. 21, No. 13. See the NIHR Journals Library website for further project information.

Voice over internet protocol with prepaid calling card solutions

NASA Astrophysics Data System (ADS)

Gunadi, Tri

2001-07-01

The VoIP technology is growing up rapidly, it has big network impact on PT Telkom Indonesia, the bigger telecommunication operator in Indonesia. Telkom has adopted VoIP and one other technology, Intelligent Network (IN). We develop those technologies together in one service product, called Internet Prepaid Calling Card (IPCC). IPCC is becoming new breakthrough for the Indonesia telecommunication services especially on VoIP and Prepaid Calling Card solutions. Network architecture of Indonesia telecommunication consists of three layer, Local, Tandem and Trunck Exchange layer. Network development researches for IPCC architecture are focus on network overlay hierarchy, Internet and PSTN. With this design hierarchy the goal of Interworking PSTN, VoIP and IN calling card, become reality. Overlay design for IPCC is not on Trunck Exchange, this is the new architecture, these overlay on Tandem and Local Exchange, to make the faster call processing. The nodes added: Gateway (GW) and Card Management Center (CMC) The GW do interfacing between PSTN and Internet Network used ISDN-PRA and Ethernet. The other functions are making bridge on circuit (PSTN) with packet (VoIP) based and real time billing process. The CMC used for data storage, pin validation, report activation, tariff system, directory number and all the administration transaction. With two nodes added the IPCC service offered to the market.

Randomized Trial of a Family-based, Automated, Conversational Obesity Treatment Program for Underserved Populations

PubMed Central

Wright, J. A.; Phillips, B.D.; Watson, B.L.; Newby, P.K.; Norman, G. J.; Adams, W.G.

2013-01-01

Objective To evaluate the acceptability and feasibility of a scalable obesity treatment program integrated with pediatric primary care and delivered using interactive voice technology (IVR) to families from underserved populations. Design and Methods Fifty parent-child dyads (child 9–12 yrs, BMI >95th percentile) were recruited from a pediatric primary care clinic and randomized to either an IVR or a wait-list control (WLC) group. The majority were lower-income, African-American (72%) families. Dyads received IVR calls for 12 weeks. Call content was informed by two evidenced-based interventions. Anthropometric and behavioral variables were assessed at baseline and 3 mo follow-up. Results Forty-three dyads completed the study. IVR parents ate 1 cup more fruit than WLC (p < .05). No other groups differences were found. Children classified as high users of the IVR decreased weight, BMI and BMI z-score compared to low users (p<.05). Mean number of calls for parents and children were 9.1 (5.2 SD) and 9.0 (5.7 SD), respectively. Of those who made calls, >75% agreed that the calls were useful, made for people like them, credible, and helped them eat healthy foods. Conclusion An obesity treatment program delivered via IVR may be an acceptable and feasible resource for families from underserved populations. PMID:23512915

NASA Turbulence Technologies In-Service Evaluation: Delta Air Lines Report-Out

NASA Technical Reports Server (NTRS)

Amaral, Christian; Dickson, Steve; Watts, Bill

2007-01-01

Concluding an in-service evaluation of two new turbulence detection technologies developed in the Turbulence Prediction and Warning Systems (TPAWS) element of the NASA Aviation Safety and Security Program's Weather Accident Prevention Project (WxAP), this report documents Delta's experience working with the technologies, feedback gained from pilots and dispatchers concerning current turbulence techniques and procedures, and Delta's recommendations regarding directions for further efforts by the research community. Technologies evaluated included an automatic airborne turbulence encounter reporting technology called the Turbulence Auto PIREP System (TAPS), and a significant enhancement to the ability of modern airborne weather radars to predict and display turbulence of operational significance, called E-Turb radar.

Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology.

PubMed

Han, Hau-Vei; Lin, Huang-Yu; Lin, Chien-Chung; Chong, Wing-Cheung; Li, Jie-Ru; Chen, Kuo-Ju; Yu, Peichen; Chen, Teng-Ming; Chen, Huang-Ming; Lau, Kei-May; Kuo, Hao-Chung

2015-12-14

Colloidal quantum dots which can emit red, green, and blue colors are incorporated with a micro-LED array to demonstrate a feasible choice for future display technology. The pitch of the micro-LED array is 40 μm, which is sufficient for high-resolution screen applications. The method that was used to spray the quantum dots in such tight space is called Aerosol Jet technology which uses atomizer and gas flow control to obtain uniform and controlled narrow spots. The ultra-violet LEDs are used in the array to excite the red, green and blue quantum dots on the top surface. To increase the utilization of the UV photons, a layer of distributed Bragg reflector was laid down on the device to reflect most of the leaked UV photons back to the quantum dot layers. With this mechanism, the enhanced luminous flux is 194% (blue), 173% (green) and 183% (red) more than that of the samples without the reflector. The luminous efficacy of radiation (LER) was measured under various currents and a value of 165 lm/Watt was recorded.

KSC-2011-4005

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-3956

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-3955

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4151

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-3954

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4006

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-4003

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-4016

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

KSC-2011-3957

NASA Image and Video Library

2011-05-24

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

On-call service of neurosurgeons in Germany: organization, use of communication services, and personal acceptance of modern technologies.

PubMed

Brenke, Christopher; Lassel, Elke A; Terris, Darcey; Kurt, Aysel; Schmieder, Kirsten; Schoenberg, Stefan O; Weisser, Gerald

2014-05-01

A significant proportion of acute care neurosurgical patients present to hospital outside regular working hours. The objective of our study was to evaluate the structure of neurosurgical on-call services in Germany, the use of modern communication devices and teleradiology services, and the personal acceptance of modern technologies by neurosurgeons. A nationwide survey of all 141 neurosurgical departments in Germany was performed. The questionnaire consisted of two parts: one for neurosurgical departments and one for individual neurosurgeons. The questionnaire, available online and mailed in paper form, included 21 questions about on-call service structure; the availability and use of communication devices, teleradiology services, and other information services; and neurosurgeons' personal acceptance of modern technologies. The questionnaire return rate from departments was 63.1% (89/141), whereas 187 individual neurosurgeons responded. For 57.3% of departments, teleradiology services were available and were frequently used by 62.2% of neurosurgeons. A further 23.6% of departments described using smartphone screenshots of computed tomography (CT) images transmitted by multimedia messaging service (MMS), and 8.6% of images were described as sent by unencrypted email. Although 47.0% of neurosurgeons reported owning a smartphone, only 1.1% used their phone for on-call image communication. Teleradiology services were observed to be widely used by on-call neurosurgeons in Germany. Nevertheless, a significant number of departments appear to use outdated techniques or techniques that leave patient data unprotected. On-call neurosurgeons in Germany report a willingness to adopt more modern approaches, utilizing readily available smartphones or tablet technology. Georg Thieme Verlag KG Stuttgart · New York.

Technology and Community Behavior in Online Environments

NASA Astrophysics Data System (ADS)

Blanchard, Anita L.; Markus, M. Lynne

The literature on virtual or online communities contains two largely disjoint bodies of scholarship. One, which we call the “communities” literature, is concerned primarily with the social and psychological processes observable within groups of people that interact regularly in online environments. The other, concerned primarily with the effects of technological environments on individual and group behavior, we call the “environments” literature.

Enterprise Architecture Tradespace Analysis

DTIC Science & Technology

2014-02-21

EXECUTIVE SUMMARY The Department of Defense (DoD)’s Science & Technology (S&T) priority for Engineered Resilient Systems (ERS) calls for...Science & Technology (S&T) priority for Engineered Resilient Systems (ERS) calls for adaptable designs with diverse systems models that can easily be...Department of Defense [Holland, 2012]. Some explicit goals are: • Establish baseline resiliency of current capabilities • More complete and robust

Evaluation of roadside emergency call box technology : a summary report : technical assistance report.

DOT National Transportation Integrated Search

2003-04-01

Introduction Motorist aid call boxes are used to provide motorist assistance, improve safety, and can serve as an incident detection tool. More recently, Intelligent Transportation Systems (ITS) applications have been added to call box systems to enh...

A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial.

PubMed

Pellegrini, Christine A; Duncan, Jennifer M; Moller, Arlen C; Buscemi, Joanna; Sularz, Alyson; DeMott, Andrew; Pictor, Alex; Pagoto, Sherry; Siddique, Juned; Spring, Bonnie

2012-11-30

Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Ninety-six obese adults (BMI 30-39.9 kg/m2) will be randomized to one of three treatment conditions: (1) standard behavioral weight loss (STND), (2) technology-supported behavioral weight loss (TECH); or (3) self-guided behavioral weight loss (SELF). All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD's and will not receive coaching calls. During months 1-6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer). STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. NCT01051713.

Incorporating tailored interactive patient solutions using interactive voice response technology to improve statin adherence: results of a randomized clinical trial in a managed care setting.

PubMed

Stacy, Jane N; Schwartz, Steven M; Ershoff, Daniel; Shreve, Marilyn Standifer

2009-10-01

The current study presents the impact of a behavior change program to increase statin adherence using interactive voice response (IVR) technology. Subjects were affiliated with a large health benefit company, were prescribed a statin (index) and had no lipid-lowering pharmacy claims in the previous 6 months, and were continuously enrolled in the plan for 12 months prior and 6 months post index statin. Potential subjects (1219) were contacted by the IVR system; 497 gave informed consent. Subjects were asked to respond to 15 questions from the IVR that were guided by several behavior change theories. At the conclusion of the questions, subjects were randomly assigned to either a control group (n = 244), who received generic feedback at the conclusion of the call and were then mailed a generic cholesterol guide, or an experimental group (n = 253), who received tailored feedback based on their cholesterol-related knowledge, attitudes, beliefs, and perceived barriers to medication adherence, and were mailed a tailored guide that reinforced similar themes. Subjects in the experimental group had the opportunity to participate in 2 additional tailored IVR support calls. The primary dependent variable was 6-month point prevalence, defined as claims evidence of a statin on days 121-180 post index statin. Subjects in the experimental group had a significantly higher 6-month point prevalence than the controls (70.4% vs. 60.7%, P < 0.05). Results of this study suggest that a behavioral support program using IVR technology can be a cost-effective modality to address the important public health problem of patient nonadherence with statin medication.

75 FR 3203 - National Medal of Technology and Innovation Call for 2010 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

... outstanding, lasting contribution to the economy through the promotion of technology or technological manpower... contributions to the promotion of technology or technological manpower for the improvement of the economic... highlights the national importance of fostering technological innovation based upon solid science, resulting...

75 FR 82378 - National Medal of Technology and Innovation Call for 2011 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... the promotion of technology or technological manpower, you may obtain a nomination form from: http... promotion of technology and technological manpower for the improvement of the economic, environmental or... national importance of fostering technological innovation based upon solid science, resulting in...

Senate passes clean air bill

NASA Astrophysics Data System (ADS)

In an 89 to 11 vote the Senate passed a clean air bill aimed at reducing pollution by the turn of the century by imposing tougher controls on American industry. The bill is the first revision of the Clean Air Act of 1970 in 13 years and calls for new limits on auto pollution to clean up smog in most U.S. cities, decreasing by half emissions by power plants that cause acid rain to protect the ecology, and increasing technological controls on factories to protect against cancer-causing and toxic substances. The bill will add about $20 billion per year to the estimated $33 billion cost of complying with current pollution laws.

Distributed data collection and supervision based on web sensor

NASA Astrophysics Data System (ADS)

He, Pengju; Dai, Guanzhong; Fu, Lei; Li, Xiangjun

2006-11-01

As a node in Internet/Intranet, web sensor has been promoted in recent years and wildly applied in remote manufactory, workshop measurement and control field. However, the conventional scheme can only support HTTP protocol, and the remote users supervise and control the collected data published by web in the standard browser because of the limited resource of the microprocessor in the sensor; moreover, only one node of data acquirement can be supervised and controlled in one instant therefore the requirement of centralized remote supervision, control and data process can not be satisfied in some fields. In this paper, the centralized remote supervision, control and data process by the web sensor are proposed and implemented by the principle of device driver program. The useless information of the every collected web page embedded in the sensor is filtered and the useful data is transmitted to the real-time database in the workstation, and different filter algorithms are designed for different sensors possessing independent web pages. Every sensor node has its own filter program of web, called "web data collection driver program", the collecting details are shielded, and the supervision, control and configuration software can be implemented by the call of web data collection driver program just like the use of the I/O driver program. The proposed technology can be applied in the data acquirement where relative low real-time is required.

The endpoint detection technique for deep submicrometer plasma etching

NASA Astrophysics Data System (ADS)

Wang, Wei; Du, Zhi-yun; Zeng, Yong; Lan, Zhong-went

2009-07-01

The availability of reliable optical sensor technology provides opportunities to better characterize and control plasma etching processes in real time, they could play a important role in endpoint detection, fault diagnostics and processes feedback control and so on. The optical emission spectroscopy (OES) method becomes deficient in the case of deep submicrometer gate etching. In the newly developed high density inductively coupled plasma (HD-ICP) etching system, Interferometry endpoint (IEP) is introduced to get the EPD. The IEP fringe count algorithm is investigated to predict the end point, and then its signal is used to control etching rate and to call end point with OES signal in over etching (OE) processes step. The experiment results show that IEP together with OES provide extra process control margin for advanced device with thinner gate oxide.

A Model for High Frequency Radar Auroral Clutter

DTIC Science & Technology

1980-03-01

PROGRAM ELEMENT PROJECT. TA9K Deputy for Electronic Technology (HADCEEP) AREA A WORK UNIT Hansco AF13 02Fl II CONTROLLING OFFICE NAME AND ADDRESS W...region is sometimes referred to as the "polar cavity." 16 I wf, 2. RKlIO PROPA(ArION CONSIDERATIONS An essential element in computing the incidence and...called liaselgrove equations. 8 This is :iccomplished nume’rically by use of a computer program originally developed by ,lTnes .11rd later modified

An Internet of Things Approach to Electrical Power Monitoring and Outage Reporting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koch, Daniel B

The so-called Internet of Things concept has captured much attention recently as ordinary devices are connected to the Internet for monitoring and control purposes. One enabling technology is the proliferation of low-cost, single board computers with built-in network interfaces. Some of these are capable of hosting full-fledged operating systems that provide rich programming environments. Taken together, these features enable inexpensive solutions for even traditional tasks such as the one presented here for electrical power monitoring and outage reporting.

Software Agents as Facilitators of Coherent Coalition Operations

DTIC Science & Technology

2001-06-01

In this regard, an important output from DARPA’s CoABS programme is the CoABS Grid - a middleware layer based on Java / Jini technology that provides...2 The C3I Group, Technical Panel 9. 6 developed between two countries who are fighting for control of Binni. To the north is Gao - which has...well developed and fundamentalist country. Gao has managed to annex an area of land, called it Binni and has put in its own puppet government. This

Group-based variant calling leveraging next-generation supercomputing for large-scale whole-genome sequencing studies.

PubMed

Standish, Kristopher A; Carland, Tristan M; Lockwood, Glenn K; Pfeiffer, Wayne; Tatineni, Mahidhar; Huang, C Chris; Lamberth, Sarah; Cherkas, Yauheniya; Brodmerkel, Carrie; Jaeger, Ed; Smith, Lance; Rajagopal, Gunaretnam; Curran, Mark E; Schork, Nicholas J

2015-09-22

Next-generation sequencing (NGS) technologies have become much more efficient, allowing whole human genomes to be sequenced faster and cheaper than ever before. However, processing the raw sequence reads associated with NGS technologies requires care and sophistication in order to draw compelling inferences about phenotypic consequences of variation in human genomes. It has been shown that different approaches to variant calling from NGS data can lead to different conclusions. Ensuring appropriate accuracy and quality in variant calling can come at a computational cost. We describe our experience implementing and evaluating a group-based approach to calling variants on large numbers of whole human genomes. We explore the influence of many factors that may impact the accuracy and efficiency of group-based variant calling, including group size, the biogeographical backgrounds of the individuals who have been sequenced, and the computing environment used. We make efficient use of the Gordon supercomputer cluster at the San Diego Supercomputer Center by incorporating job-packing and parallelization considerations into our workflow while calling variants on 437 whole human genomes generated as part of large association study. We ultimately find that our workflow resulted in high-quality variant calls in a computationally efficient manner. We argue that studies like ours should motivate further investigations combining hardware-oriented advances in computing systems with algorithmic developments to tackle emerging 'big data' problems in biomedical research brought on by the expansion of NGS technologies.

77 FR 2047 - National Medal of Technology and Innovation Call for 2012 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... through the promotion of technology or technological manpower, you may obtain a nomination form from: http... to the promotion of technology and technological manpower for the improvement of the economic... highlights the national importance of fostering technological innovation based upon solid science, resulting...

Dulce Wireless Tijuana: A Randomized Control Trial Evaluating the Impact of Project Dulce and Short-Term Mobile Technology on Glycemic Control in a Family Medicine Clinic in Northern Mexico.

PubMed

Anzaldo-Campos, María Cecilia; Contreras, Sonia; Vargas-Ojeda, Adriana; Menchaca-Díaz, Rufino; Fortmann, Addie; Philis-Tsimikas, Athena

2016-04-01

The global epidemic of diabetes calls for innovative interventions. This study evaluated the effectiveness of the Project Dulce model, with and without wireless technology, on glycemic control and other clinical and self-reported outcomes in patients with poorly controlled type 2 diabetes in Mexico. Adults with type 2 diabetes and a glycated hemoglobin A1c (HbA1c) level of ≥8% were recruited from Family Medical Unit #27 of the Instituto Mexicano del Seguro Social (IMSS) in Tijuana, México, and randomly assigned to one of three groups: Project Dulce-only (PD); Project Dulce technology-enhanced with mobile tools (PD-TE); or IMSS standard of care/control group (CG). Clinical and self-reported outcomes were assessed at baseline, Month 4, and Month 10. Time-by-group interactions and within-group changes were analyzed. HbA1c reductions from baseline to Month 10 were significantly greater in PD-TE (-3.0% [-33 mmol/mol]) and PD (-2.6% [-28.7 mmol/mol]) compared with CG (-1.3% [-14.2 mmol/mol]) (P = 0.009 and 0.001, respectively). PD-TE and PD also exhibited significant improvement in diabetes knowledge when compared with CG (P < 0.05 for both). No statistically significant differences were detected between PD and PD-TE on these indicators (P = 0.54 and 0.86, respectively). Several within-group improvements were observed on other clinical and self-report indicators but did not vary significantly across groups. Project Dulce with and without wireless technology substantially improved glycemic control and diabetes knowledge in high-risk patients with type 2 diabetes in a Mexican family medical unit, suggesting that integrating peer-led education, nurse coordination, and 3G wireless technology is an effective approach for improving diabetes outcomes in high-risk populations.

Fiber-channel audio video standard for military and commercial aircraft product lines

NASA Astrophysics Data System (ADS)

Keller, Jack E.

2002-08-01

Fibre channel is an emerging high-speed digital network technology that combines to make inroads into the avionics arena. The suitability of fibre channel for such applications is largely due to its flexibility in these key areas: Network topologies can be configured in point-to-point, arbitrated loop or switched fabric connections. The physical layer supports either copper or fiber optic implementations with a Bit Error Rate of less than 10-12. Multiple Classes of Service are available. Multiple Upper Level Protocols are supported. Multiple high speed data rates offer open ended growth paths providing speed negotiation within a single network. Current speeds supported by commercially available hardware are 1 and 2 Gbps providing effective data rates of 100 and 200 MBps respectively. Such networks lend themselves well to the transport of digital video and audio data. This paper summarizes an ANSI standard currently in the final approval cycle of the InterNational Committee for Information Technology Standardization (INCITS). This standard defines a flexible mechanism whereby digital video, audio and ancillary data are systematically packaged for transport over a fibre channel network. The basic mechanism, called a container, houses audio and video content functionally grouped as elements of the container called objects. Featured in this paper is a specific container mapping called Simple Parametric Digital Video (SPDV) developed particularly to address digital video in avionics systems. SPDV provides pixel-based video with associated ancillary data typically sourced by various sensors to be processed and/or distributed in the cockpit for presentation via high-resolution displays. Also highlighted in this paper is a streamlined Upper Level Protocol (ULP) called Frame Header Control Procedure (FHCP) targeted for avionics systems where the functionality of a more complex ULP is not required.

Modeling the Multi-Body System Dynamics of a Flexible Solar Sail Spacecraft

NASA Technical Reports Server (NTRS)

Kim, Young; Stough, Robert; Whorton, Mark

2005-01-01

Solar sail propulsion systems enable a wide range of space missions that are not feasible with current propulsion technology. Hardware concepts and analytical methods have matured through ground development to the point that a flight validation mission is now realizable. Much attention has been given to modeling the structural dynamics of the constituent elements, but to date an integrated system level dynamics analysis has been lacking. Using a multi-body dynamics and control analysis tool called TREETOPS, the coupled dynamics of the sailcraft bus, sail membranes, flexible booms, and control system sensors and actuators of a representative solar sail spacecraft are investigated to assess system level dynamics and control issues. With this tool, scaling issues and parametric trade studies can be performed to study achievable performance, control authority requirements, and control/structure interaction assessments.

Improvement in vehicle agility and stability by G-Vectoring control

NASA Astrophysics Data System (ADS)

Yamakado, Makoto; Takahashi, Jyunya; Saito, Shinjiro; Yokoyama, Atsushi; Abe, Masato

2010-12-01

We extracted a trade-off strategy between longitudinal traction/braking force and cornering force by using jerk information through observing an expert driver's voluntary braking and turning action. Using the expert driver's strategy, we developed a new control concept, called 'G-Vectoring control', which is an automatic longitudinal acceleration control (No DYC) in accordance with the vehicle's lateral jerk caused by the driver's steering manoeuvres. With the control, the direction of synthetic acceleration (G) changes seamlessly (i.e. vectoring). The improvements in vehicle agility and stability were evaluated by theoretical analysis and through computer simulation. We then introduced a 'G-Vectoring' equipped test vehicle realised by brake-by-wire technology and executed a detailed examination on a test track. We have confirmed that the vehicle motion in view of both handling and ride quality has improved dramatically.

Electronic Nose for Quality Control of Colombian Coffee through the Detection of Defects in “Cup Tests”

PubMed Central

Rodríguez, Juan; Durán, Cristhian; Reyes, Adriana

2010-01-01

Electronic noses (ENs), are used for many applications, but we must emphasize the importance of their application to foodstuffs like coffee. This paper presents a research study about the analysis of Colombian coffee samples for the detection and classification of defects (i.e., using “Cup Tests”), which was conducted at the Almacafé quality control laboratory in Cúcuta, Colombia. The results obtained show that the application of an electronic nose called “A-NOSE”, may be used in the coffee industry for the cupping tests. The results show that e-nose technology can be a useful tool for quality control to evaluate the excellence of the Colombian coffee produced by National Federation of Coffee Growers. PMID:22315525

Electronic nose for quality control of Colombian coffee through the detection of defects in "Cup Tests".

PubMed

Rodríguez, Juan; Durán, Cristhian; Reyes, Adriana

2010-01-01

Electronic noses (ENs), are used for many applications, but we must emphasize the importance of their application to foodstuffs like coffee. This paper presents a research study about the analysis of Colombian coffee samples for the detection and classification of defects (i.e., using "Cup Tests"), which was conducted at the Almacafé quality control laboratory in Cúcuta, Colombia. The results obtained show that the application of an electronic nose called "A-NOSE", may be used in the coffee industry for the cupping tests. The results show that e-nose technology can be a useful tool for quality control to evaluate the excellence of the Colombian coffee produced by National Federation of Coffee Growers.

Intelligent redundant actuation system requirements and preliminary system design

NASA Technical Reports Server (NTRS)

Defeo, P.; Geiger, L. J.; Harris, J.

1985-01-01

Several redundant actuation system configurations were designed and demonstrated to satisfy the stringent operational requirements of advanced flight control systems. However, this has been accomplished largely through brute force hardware redundancy, resulting in significantly increased computational requirements on the flight control computers which perform the failure analysis and reconfiguration management. Modern technology now provides powerful, low-cost microprocessors which are effective in performing failure isolation and configuration management at the local actuator level. One such concept, called an Intelligent Redundant Actuation System (IRAS), significantly reduces the flight control computer requirements and performs the local tasks more comprehensively than previously feasible. The requirements and preliminary design of an experimental laboratory system capable of demonstrating the concept and sufficiently flexible to explore a variety of configurations are discussed.

QuickAssist: Reading and Learning Vocabulary Independently with the Help of CALL and NLP Technologies

ERIC Educational Resources Information Center

Wood, Peter

2011-01-01

Independent learning is a buzz word that is often used in connection with computer technologies applied to the area of foreign language instruction. This chapter takes a critical look at some of the stereotypes that exist with regard to computer-assisted language learning (CALL) as a money saver and an easy way to create an "independent"…

Design and simulation of the surface shape control system for membrane mirror

NASA Astrophysics Data System (ADS)

Zhang, Gengsheng; Tang, Minxue

2009-11-01

The surface shape control is one of the key technologies for the manufacture of membrane mirror. This paper presents a design of membrane mirror's surface shape control system on the basis of fuzzy logic control. The system contains such function modules as surface shape design, surface shape control, surface shape analysis, and etc. The system functions are realized by using hybrid programming technology of Visual C# and MATLAB. The finite element method is adopted to simulate the surface shape control of membrane mirror. The finite element analysis model is established through ANSYS Parametric Design Language (APDL). ANSYS software kernel is called by the system in background running mode when doing the simulation. The controller is designed by means of controlling the sag of the mirror's central crosssection. The surface shape of the membrane mirror and its optical aberration are obtained by applying Zernike polynomial fitting. The analysis of surface shape control and the simulation of disturbance response are performed for a membrane mirror with 300mm aperture and F/2.7. The result of the simulation shows that by using the designed control system, the RMS wavefront error of the mirror can reach to 142λ (λ=632.8nm), which is consistent to the surface accuracy of the membrane mirror obtained by the large deformation theory of membrane under the same condition.

The Impact of CALL Instruction on English Language Teachers' Use of Technology in Language Teaching

ERIC Educational Resources Information Center

Kiliçkaya, Ferit; Seferoglu, Gölge

2013-01-01

This study investigates the impact of CALL training on in-service language teachers' use of CALL-based activities in their classrooms. The participants included 35 pre-service English as a Foreign Language (EFL) teachers who took an undergraduate-level elective CALL course (FLE318) offered during the 2008-2009 academic year in the Department of…

Establishment of cell surface engineering and its development.

PubMed

Ueda, Mitsuyoshi

2016-07-01

Cell surface display of proteins/peptides has been established based on mechanisms of localizing proteins to the cell surface. In contrast to conventional intracellular and extracellular (secretion) expression systems, this method, generally called an arming technology, is particularly effective when using yeasts as a host, because the control of protein folding that is often required for the preparation of proteins can be natural. This technology can be employed for basic and applied research purposes. In this review, I describe various strategies for the construction of engineered yeasts and provide an outline of the diverse applications of this technology to industrial processes such as the production of biofuels and chemicals, as well as bioremediation and health-related processes. Furthermore, this technology is suitable for novel protein engineering and directed evolution through high-throughput screening, because proteins/peptides displayed on the cell surface can be directly analyzed using intact cells without concentration and purification. Functional proteins/peptides with improved or novel functions can be created using this beneficial, powerful, and promising technique.

Humanity and Environment Co-influence in the Shadow of Technological Convergence

NASA Astrophysics Data System (ADS)

Ezdina, Natalya

2017-11-01

Today one of the most important issues is the search for controlled ways of sustainable development of civilization, society, and a human. Previously, the development of society was determined by natural and evolutionary factors based on the principle of natural selection of living organisms and populations. However, as social institutions are developing, the technological factors of development, determined by the ideas about this phenomenon - the special arrangement of productive forces and the need to protect or change the environment, began to appear. The end of the 20th century was marked by the realization of a new, universal form of economic and technological synthesis - convergence, which, in the process of developing science and improving technology, became so comprehensive and widespread that today it can be called the force that transforms the environment. In this regard, it is convergent technologies that become the focus and the basis for research of the processes uniting the main spheres of human activity - science, society and technology, which will lead to a new form of interaction with the environment, conditioned not only by scientific and technological changes and social factors, but also new organizational forms of their interaction.

[Information technology for the management of health care data: the EPIweb project].

PubMed

Vittorini, Pierpaolo; Necozione, Stefano; di Orio, Ferdinando

2005-01-01

In the US, the Center for Disease Control and Prevention has produced has increased the permeability of the computer science technologies, in order to achieve a better and more efficient management of health care data. In this context, the present paper proposes a discussion regarding a web-based information system, called EPIweb. This system allows researchers to select the centers for the data entry, collect and elaborate health care data, produce technical reports and discuss results. Such a system aims to be easy-to-use, totally configurable and particularly suitable for the management of multicenter studies. The paper shows the EPIweb features, proposes a sample system run, and concludes with a discussion regarding both the advantages and the possible improvements and extensions.

GridLAB-D: An Agent-Based Simulation Framework for Smart Grids

DOE PAGES

Chassin, David P.; Fuller, Jason C.; Djilali, Ned

2014-01-01

Simulation of smart grid technologies requires a fundamentally new approach to integrated modeling of power systems, energy markets, building technologies, and the plethora of other resources and assets that are becoming part of modern electricity production, delivery, and consumption systems. As a result, the US Department of Energy’s Office of Electricity commissioned the development of a new type of power system simulation tool called GridLAB-D that uses an agent-based approach to simulating smart grids. This paper presents the numerical methods and approach to time-series simulation used by GridLAB-D and reviews applications in power system studies, market design, building control systemmore » design, and integration of wind power in a smart grid.« less

Management of natural and bioterrorism induced pandemics.

PubMed

Tyshenko, Michael G

2007-09-01

A recent approach for bioterrorism risk management calls for stricter regulations over biotechnology as a way to control subversion of technology that may be used to create a man-made pandemic. This approach is largely unworkable given the increasing pervasiveness of molecular techniques and tools throughout society. Emerging technology has provided the tools to design much deadlier pathogens but concomitantly the ability to respond to emerging pandemics to reduce mortality has also improved significantly in recent decades. In its historical context determining just how 'risky' biological weapons is an important consideration for decision making and resource allocation. Management should attempt to increase capacity, share resources, provide accurate infectious disease reporting, deliver information transparency and improve communications to help mitigate the magnitude of future pandemics.

GridLAB-D: An Agent-Based Simulation Framework for Smart Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chassin, David P.; Fuller, Jason C.; Djilali, Ned

2014-06-23

Simulation of smart grid technologies requires a fundamentally new approach to integrated modeling of power systems, energy markets, building technologies, and the plethora of other resources and assets that are becoming part of modern electricity production, delivery, and consumption systems. As a result, the US Department of Energy’s Office of Electricity commissioned the development of a new type of power system simulation tool called GridLAB-D that uses an agent-based approach to simulating smart grids. This paper presents the numerical methods and approach to time-series simulation used by GridLAB-D and reviews applications in power system studies, market design, building control systemmore » design, and integration of wind power in a smart grid.« less

Fbis report. Science and technology: Economic review, September 19, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-19

;Partial Contents: Germany: Braunschweig University Tests Organic Semiconductors; France: Ariane-5 Tests Suspended; First Tests in Euro-Russian RECORD Rocket Engine Program; France: Renault`s Multi-Model Assembly Line Presented; Germany: New High Speed Trains Under Development; France: Matra Test Drone, Missile Systems; France: Experimental Project for Automobile Recycling; Germany: Survey of Flexible Manufacturing Developments; Germany: Heinrich Hertz Institute Produces Polymer-Based Circuit; French Firms Introduce Computerized Control Room for Nuclear Plants; German Machine Tool Industry Calls for Information Technology Projects; Germany: R&D Achievements in Digital HDTV Reported; Hungary: Secondary Telecommunications Networks Described; EU: Mergers in Pharmaceutical Industry Reported; SGS-Thomson Business Performance Analyzed; Germany`s Siemensmore » Invest Heavily in UK Semiconductor Plant.« less

A 30 GHz monolithic receive module technology assessment

NASA Technical Reports Server (NTRS)

Geddes, J.; Sokolov, V.; Bauhahn, P.; Contolatis, T.

1988-01-01

This report is a technology assessment relevant to the 30 GHz Monolithic Receive Module development. It is based on results obtained on the present NASA Contract (NAS3-23356) as well as on information gathered from literature and other industry sources. To date the on-going Honeywell program has concentrated on demonstrating the so-called interconnected receive module which consists of four monolithic chips - the low noise front-end amplifier (LNA), the five bit phase shifter (PS), the gain control amplifier (GC), and the RF to IF downconverter (RF/IF). Results on all four individual chips have been obtained and interconnection of the first three functions has been accomplished. Future work on this contract is aimed at a higher level of integration, i.e., integration of the first three functions (LNA + PS + GC) on a single GaAs chip. The report presents the status of this technology and projections of its future directions.

Review of Research into the Concept of the Microblowing Technique for Turbulent Skin Friction Reduction

NASA Technical Reports Server (NTRS)

2004-01-01

A new technology for reducing turbulent skin friction, called the Microblowing Technique (MBT), is presented. Results from proof-of-concept experiments show that this technology could potentially reduce turbulent skin friction by more than 50% of the skin friction of a solid flat plate for subsonic and supersonic flow conditions. The primary purpose of this review paper is to provide readers with information on the turbulent skin friction reduction obtained from many experiments using the MBT. Although the MBT has a penalty for obtaining the microblowing air associated with it, some combinations of the MBT with suction boundary layer control methods are an attractive alternative for a real application. Several computational simulations to understand the flow physics of the MBT are also included. More experiments and computational fluid dynamics (CFD) computations are needed for the understanding of the unsteady flow nature of the MBT and the optimization of this new technology.

Assistive Technologies and Issues Relating to Privacy, Ethics and Security

NASA Astrophysics Data System (ADS)

Martin, Suzanne; Bengtsson, Johan E.; Dröes, Rose-Marie

Emerging technologies provide the opportunity to develop innovative sustainable service models, capable of supporting adults with dementia at home. Devices range from simple stand-alone components that can generate a responsive alarm call to complex interoperable systems that even can be remotely controlled. From these complex systems the paradigm of the ubiquitous or ambient smart home has emerged, integrating technology, environmental design and traditional care provision. The service context is often complex, involving a variety of stakeholders and a range of interested agencies. Against this backdrop, as anecdotal evidence and government policies spawn further innovation it is critical that due consideration is given to the potential ethical ramifications at an individual, organisational and societal level. Well-grounded ethical thinking and proactive ethical responses to this innovation are required. Explicit policy and practice should therefore emerge which engenders confidence in existing supported living option schemes for adults with dementia and informs further innovation.

Integrated control of emission reductions, energy-saving, and cost-benefit using a multi-objective optimization technique in the pulp and paper industry.

PubMed

Wen, Zongguo; Xu, Chang; Zhang, Xueying

2015-03-17

Reduction of water pollutant emissions and energy consumption is regarded as a key environmental objective for the pulp and paper industry. The paper develops a bottom-up model called the Industrial Water Pollutant Control and Technology Policy (IWPCTP) based on an industrial technology simulation system and multiconstraint technological optimization. Five policy scenarios covering the business as usual (BAU) scenario, the structural adjustment (SA) scenario, the cleaner technology promotion (CT) scenario, the end-treatment of pollutants (EOP) scenario, and the coupling measures (CM) scenario have been set to describe future policy measures related to the development of the pulp and paper industry from 2010-2020. The outcome of this study indicates that the energy saving amount under the CT scenario is the largest, while that under the SA scenario is the smallest. Under the CT scenario, savings by 2020 include 70 kt/year of chemical oxygen demand (COD) emission reductions and savings of 7443 kt of standard coal, 539.7 ton/year of ammonia nitrogen (NH4-N) emission reductions, and savings of 7444 kt of standard coal. Taking emission reductions, energy savings, and cost-benefit into consideration, cleaner technologies like highly efficient pulp washing, dry and wet feedstock preparation, and horizontal continuous cooking, medium and high consistency pulping and wood dry feedstock preparation are recommended.

Integrating Computer-Assisted Language Learning in Saudi Schools: A Change Model

ERIC Educational Resources Information Center

Alresheed, Saleh; Leask, Marilyn; Raiker, Andrea

2015-01-01

Computer-assisted language learning (CALL) technology and pedagogy have gained recognition globally for their success in supporting second language acquisition (SLA). In Saudi Arabia, the government aims to provide most educational institutions with computers and networking for integrating CALL into classrooms. However, the recognition of CALL's…

Tele-autonomous systems: New methods for projecting and coordinating intelligent action at a distance

NASA Technical Reports Server (NTRS)

Conway, Lynn; Volz, Richard; Walker, Michael W.

1989-01-01

There is a growing need for humans to perform complex remote operations and to extend the intelligence and experience of experts to distant applications. It is asserted that a blending of human intelligence, modern information technology, remote control, and intelligent autonomous systems is required, and have coined the term tele-autonomous technology, or tele-automation, for methods producing intelligent action at a distance. Tele-automation goes beyond autonomous control by blending in human intelligence. It goes beyond tele-operation by incorporating as much autonomy as possible and/or reasonable. A new approach is discussed for solving one of the fundamental problems facing tele-autonomous systems: The need to overcome time delays due to telemetry and signal propagation. New concepts are introduced called time and position clutches, that allow the time and position frames between the local user control and the remote device being controlled, to be desynchronized respectively. The design and implementation of these mechanisms are described in detail. It is demonstrated that these mechanisms lead to substantial telemanipulation performance improvements, including the result of improvements even in the absence of time delays. The new controls also yield a simple protocol for control handoffs of manipulation tasks between local operators and remote systems.

Considerations in the Efficacy and Effectiveness of Virtual Reality Interventions for Stroke Rehabilitation: Moving the Field Forward

PubMed Central

Lange, Belinda

2015-01-01

In the past 2 decades, researchers have demonstrated the potential for virtual reality (VR) technologies to provide engaging and motivating environments for stroke rehabilitation interventions. Much of the research has been focused on the exploratory phase, and jumps to intervention efficacy trials and scale-up evaluation have been made with limited understanding of the active ingredients in a VR intervention for stroke. The rapid pace of technology development is an additional challenge for this emerging field, providing a moving target for researchers developing and evaluating potential VR technologies. Recent advances in customized games and cutting-edge technology used for VR are beginning to allow for researchers to understand and control aspects of the intervention related to motivation, engagement, and motor control and learning. This article argues for researchers to take a progressive, step-wise approach through the stages of intervention development using evidence-based principles, take advantage of the data that can be obtained, and utilize measurement tools to design effective VR interventions for stroke rehabilitation that can be assessed through carefully designed efficacy and effectiveness trials. This article is motivated by the recent calls in the field of rehabilitation clinical trials research for carefully structured clinical trials that have progressed through the phases of research. PMID:25343960

Considerations in the efficacy and effectiveness of virtual reality interventions for stroke rehabilitation: moving the field forward.

PubMed

Proffitt, Rachel; Lange, Belinda

2015-03-01

In the past 2 decades, researchers have demonstrated the potential for virtual reality (VR) technologies to provide engaging and motivating environments for stroke rehabilitation interventions. Much of the research has been focused on the exploratory phase, and jumps to intervention efficacy trials and scale-up evaluation have been made with limited understanding of the active ingredients in a VR intervention for stroke. The rapid pace of technology development is an additional challenge for this emerging field, providing a moving target for researchers developing and evaluating potential VR technologies. Recent advances in customized games and cutting-edge technology used for VR are beginning to allow for researchers to understand and control aspects of the intervention related to motivation, engagement, and motor control and learning. This article argues for researchers to take a progressive, step-wise approach through the stages of intervention development using evidence-based principles, take advantage of the data that can be obtained, and utilize measurement tools to design effective VR interventions for stroke rehabilitation that can be assessed through carefully designed efficacy and effectiveness trials. This article is motivated by the recent calls in the field of rehabilitation clinical trials research for carefully structured clinical trials that have progressed through the phases of research. © 2015 American Physical Therapy Association.

A timely reminder about stimulus display times and other presentation parameters on CRTs and newer technologies.

PubMed

Bauer, Ben

2015-09-01

Scientific experimentation requires specification and control of independent variables with accurate measurement of dependent variables. In Vision Sciences (here broadly including experimental psychology, cognitive neuroscience, psychophysics, and clinical vision), proper specification and control of stimulus rendering (already a thorny issue) may become more problematic as several newer display technologies replace cathode ray tubes (CRTs) in the lab. The present paper alerts researchers to spatiotemporal differences in display technologies and how these might affect various types of experiments. Parallels are drawn to similar challenges and solutions that arose during the change from cabinet-style tachistoscopes to computer driven CRT tachistoscopes. Technical papers outlining various strengths and limitations of several classes of display devices are introduced as a resource for the reader wanting to select appropriate displays for different presentation requirements. These papers emphasise the need to measure rather than assume display characteristics because manufacturers' specifications and software reports/settings may not correspond with actual performance. This is consistent with the call by several Vision Science and Psychological Science bodies to increase replications and increase detail in Method sections. Finally, several recent tachistoscope-based experiments, which focused on the same question but were implemented with different technologies, are compared for illustrative purposes. (c) 2015 APA, all rights reserved).

ISS Live!

NASA Technical Reports Server (NTRS)

Price, Jennifer; Harris, Philip; Hochstetler, Bruce; Guerra, Mark; Mendez, Israel; Healy, Matthew; Khan, Ahmed

2013-01-01

International Space Station Live! (ISSLive!) is a Web application that uses a proprietary commercial technology called Lightstreamer to push data across the Internet using the standard http port (port 80). ISSLive! uses the push technology to display real-time telemetry and mission timeline data from the space station in any common Web browser or Internet- enabled mobile device. ISSLive! is designed to fill a unique niche in the education and outreach areas by providing access to real-time space station data without a physical presence in the mission control center. The technology conforms to Internet standards, supports the throughput needed for real-time space station data, and is flexible enough to work on a large number of Internet-enabled devices. ISSLive! consists of two custom components: (1) a series of data adapters that resides server-side in the mission control center at Johnson Space Center, and (2) a set of public html that renders the data pushed from the data adapters. A third component, the Lightstreamer server, is commercially available from a third party and acts as an intermediary between custom components (1) and (2). Lightstreamer also provides proprietary software libraries that are required to use the custom components. At the time of this reporting, this is the first usage of Web-based, push streaming technology in the aerospace industry.

The Race Idea in Reproductive Technologies: Beyond Epistemic Scientism and Technological Mastery.

PubMed

Russell, Camisha

2015-12-01

This paper explores the limitations of epistemic scientism for understanding the role the concept of race plays in assisted reproductive technology (ART) practices. Two major limitations centre around the desire to use scientific knowledge to bring about social improvement. In the first case, undue focus is placed on debunking the scientific reality of racial categories and characteristics. The alternative to this approach is to focus instead on the way the race idea functions in ART practices. Doing so reveals how the race idea (1) helps to define the reproductive "problems" different groups of women are experiencing and to dictate when and how they should be "helped"; (2) helps to resolve tensions about who should be considered the real parents of children produced by reproductive technologies; and (3) is used to limit ART use where that use threatens to denaturalize the very sociopolitical landscape the race idea has created. In the second case, scientific knowledge regarding reproduction is thought to call for technological control over that reproduction. This leads to an overemphasis on personal responsibility and a depoliticization of racialized social inequalities.

KSC-2011-4155

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4152

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. hirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4141

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition held at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4160

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4004

NASA Image and Video Library

2011-05-25

CAPE CANAVERAL, Fla. -- University students prepare for NASA's second annual Lunabotics Mining Competition inside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Frankie Martin

KSC-2011-4158

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4159

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4153

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4171

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, participants applaud the winning team of the competition during the NASA's second annual Lunabotics Mining Competition award ceremony. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4164

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, university students take part in an award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4142

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition held at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4013

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- University students gather for the opening ceremony of NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

KSC-2011-4169

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, Kennedy Center Director Bob Cabana speaks to university students at the award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4146

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition held at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4143

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition held at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4163

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, university students take part in an award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4140

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- University students make final preparations for NASA's second annual Lunabotics Mining Competition held at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

Method for Evaluation of Outage Probability on Random Access Channel in Mobile Communication Systems

NASA Astrophysics Data System (ADS)

Kollár, Martin

2012-05-01

In order to access the cell in all mobile communication technologies a so called random-access procedure is used. For example in GSM this is represented by sending the CHANNEL REQUEST message from Mobile Station (MS) to Base Transceiver Station (BTS) which is consequently forwarded as an CHANNEL REQUIRED message to the Base Station Controller (BSC). If the BTS decodes some noise on the Random Access Channel (RACH) as random access by mistake (so- called ‘phantom RACH') then it is a question of pure coincidence which èstablishment cause’ the BTS thinks to have recognized. A typical invalid channel access request or phantom RACH is characterized by an IMMEDIATE ASSIGNMENT procedure (assignment of an SDCCH or TCH) which is not followed by sending an ESTABLISH INDICATION from MS to BTS. In this paper a mathematical model for evaluation of the Power RACH Busy Threshold (RACHBT) in order to guaranty in advance determined outage probability on RACH is described and discussed as well. It focuses on Global System for Mobile Communications (GSM) however the obtained results can be generalized on remaining mobile technologies (ie WCDMA and LTE).

Thermo-Mechanical Modeling of Laser-Mig Hybrid Welding (lmhw)

NASA Astrophysics Data System (ADS)

Kounde, Ludovic; Engel, Thierry; Bergheau, Jean-Michel; Boisselier, Didier

2011-01-01

Hybrid welding is a combination of two different technologies such as laser (Nd: YAG, CO2…) and electric arc welding (MIG, MAG / TIG …) developed to assemble thick metal sheets (over 3 mm) in order to reduce the required laser power. As a matter of fact, hybrid welding is a lso used in the welding of thin materials to benefit from process, deep penetration and gap limit. But the thermo-mechanical behaviour of thin parts assembled by LMHW technology for railway cars production is far from being controlled the modeling and simulation contribute to the assessment of the causes and effects of the thermo mechanical behaviour in the assembled parts. In order to reproduce the morphology of melted and heat-affected zones, two analytic functions were combined to model the heat source of LMHW. On one hand, we applied a so-called "diaboloïd" (DB) which is a modified hyperboloid, based on experimental parameters and the analysis of the macrographs of the welds. On the other hand, we used a so-called "double ellipsoïd" (DE) which takes the MIG only contribution including the bead into account. The comparison between experimental result and numerical result shows a good agreement.

A non-parametric peak calling algorithm for DamID-Seq.

PubMed

Li, Renhua; Hempel, Leonie U; Jiang, Tingbo

2015-01-01

Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS) of double sex (DSX)-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID) technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq). One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only). After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1) reads resampling; 2) reads scaling (normalization) and computing signal-to-noise fold changes; 3) filtering; 4) Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC). We also used irreproducible discovery rate (IDR) analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width.

HORIZONTAL CONFIGURATION OF THE LASAGNA (TM) TREATMENT TECHNOLOGY USER GUIDE

EPA Science Inventory

This report is a user's guide that discusses the technology and operations unique to the installation and operation of the horizontal configuration of the Lasagna? integrated soil remediation technology. This technology, called Lasagna? because of the layers of electrodes and tr...

Expert system technologies for Space Shuttle decision support: Two case studies

NASA Technical Reports Server (NTRS)

Ortiz, Christopher J.; Hasan, David A.

1994-01-01

This paper addresses the issue of integrating the C Language Integrated Production System (CLIPS) into distributed data acquisition environments. In particular, it presents preliminary results of some ongoing software development projects aimed at exploiting CLIPS technology in the new mission control center (MCC) being built at NASA Johnson Space Center. One interesting aspect of the control center is its distributed architecture; it consists of networked workstations which acquire and share data through the NASA/JSC-developed information sharing protocol (ISP). This paper outlines some approaches taken to integrate CLIPS and ISP in order to permit the development of intelligent data analysis applications which can be used in the MCC. Three approaches to CLIPS/IPS integration are discussed. The initial approach involves clearly separating CLIPS from ISP using user-defined functions for gathering and sending data to and from a local storage buffer. Memory and performance drawbacks of this design are summarized. The second approach involves taking full advantage of CLIPS and the CLIPS Object-Oriented Language (COOL) by using objects to directly transmit data and state changes from ISP to COOL. Any changes within the object slots eliminate the need for both a data structure and external function call thus taking advantage of the object matching capabilities within CLIPS 6.0. The final approach is to treat CLIPS and ISP as peer toolkits. Neither is embedded in the other; rather the application interweaves calls to each directly in the application source code.

Rapid Prototyping in Technology Education.

ERIC Educational Resources Information Center

Flowers, Jim; Moniz, Matt

2002-01-01

Describes how technology education majors are using a high-tech model builder, called a fused deposition modeling machine, to develop their models directly from computer-based designs without any machining. Gives examples of applications in technology education. (JOW)

Multidisciplinary Responses to the Sexual Victimization of Children: Use of Control Phone Calls.

PubMed

Canavan, J William; Borowski, Christine; Essex, Stacy; Perkowski, Stefan

2017-10-01

This descriptive study addresses the question of the value of one-party consent phone calls regarding the sexual victimization of children. The authors reviewed 4 years of experience with children between the ages of 3 and 18 years selected for the control phone calls after a forensic interview by the New York State Police forensic interviewer. The forensic interviewer identified appropriate cases for control phone calls considering New York State law, the child's capacity to make the call, the presence of another person to make the call and a supportive residence. The control phone call process has been extremely effective forensically. Offenders choose to avoid trial by taking a plea bargain thereby dramatically speeding up the criminal judicial and family court processes. An additional outcome of the control phone call is the alleged offender's own words saved the child from the trauma of testifying in court. The control phone call reduced the need for children to repeat their stories to various interviewers. A successful control phone call gives the child a sense of vindication. This technique is the only technique that preserves the actual communication pattern between the alleged victim and the alleged offender. This can be of great value to the mental health professionals working with both the child and the alleged offender. Cautions must be considered regarding potential serious adverse effects on the child. The multidisciplinary team members must work together in the control phone call. The descriptive nature of this study did not allow the authors adequate demographic data, a subject that should be addressed in future prospective study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wesnor, J.D.

Since passage of the Clean Air Act, Asea Brown Boveri (ABB) has been actively developing a knowledge base on the Title 3 hazardous air pollutants, more commonly called air toxics. As ABB is a multinational company, US operating companies are able to call upon work performed by European counterparts, who have faced similar legislation several years ago. In addition to the design experience and database acquired in Europe, ABB Inc. has been pursuing several other avenues to expand its air toxics knowledge. ABB Combustion Engineering (ABB CE) is presently studying the formation of organic pollutants within the combustion furnace andmore » partitioning of trace metals among the furnace outlet streams. ABB Environmental Systems (ABBES) has reviewed available and near-term control technologies and methods. Also, both ABB CE and ABBES have conducted source sampling and analysis at commercial installations for hazardous air pollutants to determine the emission rates and removal performance of various types of equipment. Several different plants hosted these activities, allowing for variation in fuel type and composition, boiler configuration, and air pollution control equipment. This paper discusses the results of these investigations.« less

New CALL-SLA Research Interfaces for the 21st Century: Towards Equitable Multilingualism

ERIC Educational Resources Information Center

Ortega, Lourdes

2017-01-01

The majority of the world is multilingual, but inequitably multilingual, and much of the world is also technologized, but inequitably so. Thus, researchers in the fields of computer-assisted language learning (CALL) and second language acquisition (SLA) would profit from considering multilingualism and social justice when envisioning new CALL-SLA…

Spoken Grammar Practice and Feedback in an ASR-Based CALL System

ERIC Educational Resources Information Center

de Vries, Bart Penning; Cucchiarini, Catia; Bodnar, Stephen; Strik, Helmer; van Hout, Roeland

2015-01-01

Speaking practice is important for learners of a second language. Computer assisted language learning (CALL) systems can provide attractive opportunities for speaking practice when combined with automatic speech recognition (ASR) technology. In this paper, we present a CALL system that offers spoken practice of word order, an important aspect of…

Formal and Informal CALL Preparation and Teacher Attitude toward Technology

ERIC Educational Resources Information Center

Kessler, Greg

2007-01-01

Recent research suggests that there is a general lack of a computer-assisted language learning (CALL) presence in teacher preparation programs. There is also evidence that teachers obtain a majority of their CALL knowledge from informal sources and personal experience rather than through formalized preparation. Further, graduates of these programs…

Enhancing Online CALL Design: The Case for Evaluation

ERIC Educational Resources Information Center

Hemard, Dominique

2004-01-01

Whilst the potential of online Computer Assisted Language Learning (CALL) in terms of access, immediacy and exposure is widely acknowledged, as yet remarkably little is known about its impact on the user population, be they language teachers or learners. Indeed, beyond its technological development, online CALL design is still affected by a dearth…

Evaluating the Motivational Impact of CALL Systems: Current Practices and Future Directions

ERIC Educational Resources Information Center

Bodnar, Stephen; Cucchiarini, Catia; Strik, Helmer; van Hout, Roeland

2016-01-01

A major aim of computer-assisted language learning (CALL) is to create computer environments that facilitate students' second language (L2) acquisition. To achieve this aim, CALL employs technological innovations to create novel types of language practice. Evaluations of the new practice types serve the important role of distinguishing effective…

Factors Affecting the Normalization of CALL in Chinese Senior High Schools

ERIC Educational Resources Information Center

He, Bi; Puakpong, Nattaya; Lian, Andrew

2015-01-01

With the development of Information Technology, increasing attention has been paid to Computer Assisted Language Learning (CALL). Meanwhile, increasing enthusiasm is seen for English learning and teaching in China. Yet, few research studies have focused on the normalization of CALL in ethnically diverse areas. In response to this research gap,…

English Language Teachers' Perceptions of Computer-Assisted Language Learning

ERIC Educational Resources Information Center

Feng, Yu Lin

2012-01-01

A growing number of studies have reported the potential use of computer-assisted language learning (CALL) and other types of technology for ESL and EFL students. So far, most studies on CALL have focused on CALL-classroom comparisons (Chenoweth & Murday, 2003; Chenoweth, Ushida, & Murday, 2007; Fitze, 2006; Neri, Mich, Gerosa, &…

Our Time: The Legacy of the Twentieth Century

ERIC Educational Resources Information Center

Humphries, Tom

2014-01-01

We are probably only at the beginning of our understanding of a period of time that gave us a new name for an old language, "ASL," a new consciousness called "Deaf culture," a national uprising called "DPN," and a science fiction-like new technology called "VP." The two halves of the twentieth century might…

Power in telephone-advice nursing.

PubMed

Leppänen, Vesa

2010-03-01

Power is a central aspect of nursing, especially in telephone-advice nursing, where nurses assess callers' medical problems and decide what measures that need to be taken. This article presents a framework for understanding how power operates in social interaction between nurses and callers in telephone-advice nursing in primary care in Sweden. Power is analysed as the result of nurses and callers being oriented to five social structures that are relevant to their actions in this context, namely the organization of telephone-advice nursing, the social stock of medical knowledge, the professional division of labour between nurses and doctors, structures of social interaction and structures of emotions. While structural constraints govern some actions to a high degree, calls take place in an organizational free room that give nurses more leeway for acting more creatively. The discussion focuses on the introduction of new technologies of control, for instance computerized decision support systems and audio recording of calls, and on how they reduce the free room. Empirical data consist of 276 audio-recorded telephone calls to 13 nurses at six primary-care centres and of qualitative interviews with 18 nurses.

Policy and science of FMD control: the stakeholders' contribution to decision making. A call for integrated animal disease management.

PubMed

Marshall, M; Roger, P

Effective control of foot-and-mouth disease (FMD)--prevention, surveillance and response--requires integrated animal disease management as a cooperative effort between stakeholders, scientists and decision makers, at all levels: local, national, regional and international. This paper suggests a process and outlines specific critical issues that need to be addressed in order to best use the science and technology that is available now and to develop new technologies that will lead to significant improvements. The overall objective is not to allow the disease or the disease control measures to damage, violate or destroy public health, the environment, or the economy, or to allow politics to drive disease control policies at the expense of the ethical relationship between man and animals. Critical issues of prevention, surveillance and response policies are examined, and specific recommendations are made to reduce the risk or effect of natural and deliberate introductions. For prevention: a) rapid portable diagnostics and provision of vaccines to control and eradicate the reservoirs of disease. b) alerts, leading to increased controls at borders, animal movement restrictions and biosecurity on farms. For surveillance: a) reporting of unusual symptoms, rapid diagnostics and identification of patterns. b) enhanced role of geographic information systems (GIS) linked to an IT system. c) collection, storage and sharing of disease information. For response policies: a) the role and implementation of stamping out and of vaccination. b) simulation exercises with stakeholder participation. For all aspects of FMD control, consideration should be given to: a) the composition, responsibilities and role of the balanced, permanently operational Expert Group in EU member states as specified in the EU FMD Directive. b) establishment of a balanced, permanently operational European Expert Group. c) establishment of both a European and an International FMD Task Force. Stakeholders need access to accurate, up-to-date, unbiased information about the science of disease control, how the technologies work and can be used, and an assurance that the technologies best fit for the required purpose will be used. Researchers need to work together to avoid duplications and gaps in their research and to recognise the benefit of new, and sometimes innovative, technologies. They also need feedback from stakeholders on the acceptability and best use of the technologies. A process to achieve these goals through an EU funded collaborative research project will be described.

Information Presentation and Control in a Modern Air Traffic Control Tower Simulator

NASA Technical Reports Server (NTRS)

Haines, Richard F.; Doubek, Sharon; Rabin, Boris; Harke, Stanton

1996-01-01

The proper presentation and management of information in America's largest and busiest (Level V) air traffic control towers calls for an in-depth understanding of many different human-computer considerations: user interface design for graphical, radar, and text; manual and automated data input hardware; information/display output technology; reconfigurable workstations; workload assessment; and many other related subjects. This paper discusses these subjects in the context of the Surface Development and Test Facility (SDTF) currently under construction at NASA's Ames Research Center, a full scale, multi-manned, air traffic control simulator which will provide the "look and feel" of an actual airport tower cab. Special emphasis will be given to the human-computer interfaces required for the different kinds of information displayed at the various controller and supervisory positions and to the computer-aided design (CAD) and other analytic, computer-based tools used to develop the facility.

Distributed dynamic simulations of networked control and building performance applications.

PubMed

Yahiaoui, Azzedine

2018-02-01

The use of computer-based automation and control systems for smart sustainable buildings, often so-called Automated Buildings (ABs), has become an effective way to automatically control, optimize, and supervise a wide range of building performance applications over a network while achieving the minimum energy consumption possible, and in doing so generally refers to Building Automation and Control Systems (BACS) architecture. Instead of costly and time-consuming experiments, this paper focuses on using distributed dynamic simulations to analyze the real-time performance of network-based building control systems in ABs and improve the functions of the BACS technology. The paper also presents the development and design of a distributed dynamic simulation environment with the capability of representing the BACS architecture in simulation by run-time coupling two or more different software tools over a network. The application and capability of this new dynamic simulation environment are demonstrated by an experimental design in this paper.

Distributed dynamic simulations of networked control and building performance applications

PubMed Central

Yahiaoui, Azzedine

2017-01-01

The use of computer-based automation and control systems for smart sustainable buildings, often so-called Automated Buildings (ABs), has become an effective way to automatically control, optimize, and supervise a wide range of building performance applications over a network while achieving the minimum energy consumption possible, and in doing so generally refers to Building Automation and Control Systems (BACS) architecture. Instead of costly and time-consuming experiments, this paper focuses on using distributed dynamic simulations to analyze the real-time performance of network-based building control systems in ABs and improve the functions of the BACS technology. The paper also presents the development and design of a distributed dynamic simulation environment with the capability of representing the BACS architecture in simulation by run-time coupling two or more different software tools over a network. The application and capability of this new dynamic simulation environment are demonstrated by an experimental design in this paper. PMID:29568135

Challenges and Security in Cloud Computing

NASA Astrophysics Data System (ADS)

Chang, Hyokyung; Choi, Euiin

People who live in this world want to solve any problems as they happen then. An IT technology called Ubiquitous computing should help the situations easier and we call a technology which makes it even better and powerful cloud computing. Cloud computing, however, is at the stage of the beginning to implement and use and it faces a lot of challenges in technical matters and security issues. This paper looks at the cloud computing security.

Power Controller

NASA Technical Reports Server (NTRS)

1982-01-01

The device called the Power Factor Controller (PFC) offers exceptional energy conservation potential by virtue of its ability to sense shifts in the relationship between voltage and current flow, and to match them with the motor's need. Originating from the solar heating/cooling program, the PFC senses a light load, it cuts the voltage level to the minimum needed which in turn reduces current flow and heat loss. Laboratory tests showed that the PFC could reduce power used by six to eight percent under normal motor loads, and as much as 65 percent when the motor was idling. Over 150 companies have been granted NASA licenses for commercial use of this technology. One system that utilizes this technology is the Vectrol Energy System, (VES) produced by Vectrol, Inc. a subsidiary of Westinghouse. The VES is being used at Woodward & Lothrop, on their escalators. Energy use is regulated according to how many people are on the escalator at any time. It is estimated that the energy savings are between 30 to 40 percent.

A new phosphate-selective sorbent for the Rem Nut process. Laboratory investigation and field experience at a medium size wastewater treatment plant.

PubMed

Petruzzelli, D; De Florio, L; Dell'Erba, A; Liberti, L; Notarnicola, M; Sengupta, A K

2003-01-01

P-control technologies for municipal wastewater are essentially based on "destructive" methods, that lead to formation of concentrated solid-phases (sludge), usually disposed-off in controlled landfills. Ion exchange, as a "non-destructive" technology, allows for selective removal and simultaneous recovery of pollutants, which can be recycled to the same and/or related productive lines. In this context, the REM NUT process removes nutrient species (HPO4 = , NH4+, K+) present in biologically oxidised municipal effluents and recovers them in the form of struvites (MgNH4PO4; MgKPO4), premium quality slow release fertilisers. The main limitation to the extensive application of this ion exchange based process is the non-availability of selective exchangers for specific removal of nutrient species. This paper illustrates laboratory investigation and pilot scale development of a so-called "P-driven" modified REM NUT scheme based on a new phosphate-selective sorbent developed at Lehigh University, PA, USA.

Life-finding detector development at NASA GSFC using a custom H4RG test bed

NASA Astrophysics Data System (ADS)

Mosby, Gregory; Rauscher, Bernard; Kutyrev, Alexander

2018-01-01

Chemical species associated with life, called biosignatures, should be visible in exoplanet atmospheres with larger space telescopes. These signals will be faint and require very low noise (~e-) detectors to robustly measure. At NASA Goddard we are developing a single detector H4RG test bed to characterize and identify potential technology developments needed for the next generation's large space telescopes. The vacuum and cryogenic test bed will include near infrared light sources from integrating spheres using a motorized shutter. The detector control and readout will be handled by a Leach controller. Detector cables have been manufactured and test planning has begun. Planned tests include testing minimum read noise capabilities, persistence mitigation strategies using long wavelength light, and measuring intrapixel variation which might affect science goals of future missions. In addition to providing a means to identify areas of improvement in detector technology, we hope to use this test bed to probe some fundamental physics of these infrared arrays.

Overview of the ATLAS Insertable B-Layer (IBL) Project

NASA Astrophysics Data System (ADS)

Kagan, M. A.

2014-06-01

The first upgrade for the Pixel Detector will be a new pixel layer which is currently under construction and will be installed during the first shutdown of the LHC machine, in 2013-14. The new detector, called the Insertable B-layer (IBL), will be installed between the existing Pixel Detector and a new, smaller radius beam-pipe. Two different silicon sensor technologies, planar n-in-n and 3D, will be used, connected with the new generation 130nm IBM CMOS FE-I4 readout chip via solder bump-bonds. A production quality control test bench was set up in the ATLAS inner detector assembly clean room to verify and rate the performance of the detector elements before integration around the beam-pipe. An overview of the IBL project, of the module design, the qualification for these sensor technologies, the integration quality control setups and recent results in the construction of this full scale new concept detector is discussed.

Analytical and statistical consideration on the use of the ISAG-ICAR-SNP bovine panel for parentage control, using the Illumina BeadChip technology: example on the German Holstein population.

PubMed

Schütz, Ekkehard; Brenig, Bertram

2015-02-05

Parentage control is moving from short tandem repeats- to single nucleotide polymorphism (SNP) systems. For SNP-based parentage control in cattle, the ISAG-ICAR Committee proposes a set of 100/200 SNPs but quality criteria are lacking. Regarding German Holstein-Friesian cattle with only a limited number of evaluated individuals, the exclusion probability is not well-defined. We propose a statistical procedure for excluding single SNPs from parentage control, based on case-by-case evaluation of the GenCall score, to minimize parentage exclusion, based on miscalled genotypes. Exclusion power of the ISAG-ICAR SNPs used for the German Holstein-Friesian population was adjusted based on the results of more than 25,000 individuals. Experimental data were derived from routine genomic selection analyses of the German Holstein-Friesian population using the Illumina BovineSNP50 v2 BeadChip (20,000 individuals) or the EuroG10K variant (7000 individuals). Averages and standard deviations of GenCall scores for the 200 SNPs of the ISAG-ICAR recommended panel were calculated and used to calculate the downward Z-value. Based on minor allelic frequencies in the Holstein-Friesian population, one minus exclusion probability was equal to 1.4×10⁻¹⁰ and 7.2×10⁻²⁶, with one and two parents, respectively. Two monomorphic SNPs from the 100-SNP ISAG-ICAR core-panel did not contribute. Simulation of 10,000 parentage control combinations, using the GenCall score data from both BeadChips, showed that with a Z-value greater than 3.66 only about 2.5% parentages were excluded, based on the ISAG-ICAR recommendations (core-panel: ≥ 90 SNPs for one, ≥ 85 SNPs for two parents). When applied to real data from 1750 single parentage assessments, the optimal threshold was determined to be Z = 5.0, with only 34 censored cases and reduction to four (0.2%) doubtful parentages. About 70 parentage exclusions due to weak genotype calls were avoided, whereas true exclusions (n = 34) were unaffected. Using SNPs for parentage evaluation provides a high exclusion power also for parent identification. SNPs with a low GenCall score show a high tendency towards intra-molecular secondary structures and substantially contribute to false exclusion of parentages. We propose a method that controls this error without excluding too many parent combinations from the evaluation.

Technology and Terrorism in the Movie Brazil

ERIC Educational Resources Information Center

Stivers, Richard

2006-01-01

The movie "Brazil" calls attention to the relationship between technology and terrorism. Terrorism appears to be a threat to the order that technology creates. But terrorism forces technology to adapt and change so that technology perfects itself as a system. In the movie, terrorism is equated with any form of bureaucratic deviance so that…

From Socialisation to Internalisation: Cultivating Technological Pedagogical Content Knowledge through Problem-Based Learning

ERIC Educational Resources Information Center

Tee, Meng Yew; Lee, Shuh Shing

2011-01-01

Recent studies on technology have shifted from the emphasis on technology skills alone to integrating pedagogy and content with technology--what Mishra and Koehler (2005) call technological pedagogical content knowledge (TPACK). Deeper understanding on how TPACK can be cultivated is needed. This design-based research explored how an improvised,…

Thinking about Pregnancy After Premature Birth

MedlinePlus

... Moms Need Blog News & Media News Videos Mission stories Ambassadors Spotlights Tools & Resources Frequently asked media questions ... a kind of fertility treatment called assisted reproductive technology (also called ART). Fertility treatment is medical treatment ...

17 CFR 21.01 - Special calls for information on controlled accounts from futures commission merchants, clearing...

Code of Federal Regulations, 2010 CFR

2010-04-01

... CALLS § 21.01 Special calls for information on controlled accounts from futures commission merchants... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Special calls for information on controlled accounts from futures commission merchants, clearing members and introducing brokers...

IMP: Using microsat technology to support engineering research inside of the International Space Station

NASA Astrophysics Data System (ADS)

Carroll, Kieran A.

2000-01-01

This paper describes an International Space Station (ISS) experiment-support facility being developed by Dynacon for the Canadian Space Agency (CSA), based on microsatellite technology. The facility is called the ``Intravehicular Maneuverable Platform,'' or IMP. The core of IMP is a small, free-floating platform (or ``bus'') deployed inside one of the pressurized crew modules of ISS. Exchangeable experimental payloads can then be mounted to the IMP bus, in order to carry out engineering development or demonstration tests, or microgravity science experiments: the bus provides these payloads with services typical of a standard satellite bus (power, attitude control, etc.). The IMP facility takes advantage of unique features of the ISS, such as the Shuttle-based logistics system and the continuous availability of crew members, to greatly reduce the expense of carrying out space engineering experiments. Further cost reduction has been made possible by incorporating technology that Dynacon has developed for use in a current microsatellite mission. Numerous potential payloads for IMP have been identified, and the first of these (a flexible satellite control experiment) is under development by Dynacon and the University of Toronto's Institute for Aerospace Studies, for the CSA. .

Enhanced Communication Network Solution for Positive Train Control Implementation

NASA Technical Reports Server (NTRS)

Fatehi, M. T.; Simon, J.; Chang, W.; Chow, E. T.; Burleigh, S. C.

2011-01-01

The commuter and freight railroad industry is required to implement Positive Train Control (PTC) by 2015 (2012 for Metrolink), a challenging network communications problem. This paper will discuss present technologies developed by the National Aeronautics and Space Administration (NASA) to overcome comparable communication challenges encountered in deep space mission operations. PTC will be based on a new cellular wireless packet Internet Protocol (IP) network. However, ensuring reliability in such a network is difficult due to the "dead zones" and transient disruptions we commonly experience when we lose calls in commercial cellular networks. These disruptions make it difficult to meet PTC s stringent reliability (99.999%) and safety requirements, deployment deadlines, and budget. This paper proposes innovative solutions based on space-proven technologies that would help meet these challenges: (1) Delay Tolerant Networking (DTN) technology, designed for use in resource-constrained, embedded systems and currently in use on the International Space Station, enables reliable communication over networks in which timely data acknowledgments might not be possible due to transient link outages. (2) Policy-Based Management (PBM) provides dynamic management capabilities, allowing vital data to be exchanged selectively (with priority) by utilizing alternative communication resources. The resulting network may help railroads implement PTC faster, cheaper, and more reliably.

Adapting Wireless Technology to Lighting Control and Environmental Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Teasdale; Francis Rubinstein; Dave Watson

The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wirelessmore » mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years.« less

The Central Control of Energy Expenditure: Exploiting Torpor for Medical Applications.

PubMed

Cerri, Matteo

2017-02-10

Autonomic thermoregulation is a recently acquired function, as it appears for the first time in mammals and provides the brain with the ability to control energy expenditure. The importance of such control can easily be highlighted by the ability of a heterogeneous group of mammals to actively reduce metabolic rate and enter a condition of regulated hypometabolism known as torpor. The central neural circuits of thermoregulatory cold defense have been recently unraveled and could in theory be exploited to reduce energy expenditure in species that do not normally use torpor, inducing a state called synthetic torpor. This approach may represent the first steps toward the development of a technology to induce a safe and reversible state of hypometabolism in humans, unlocking many applications ranging from new medical procedures to deep space travel.

Why the toxic substances control act needs an overhaul, and how to strengthen oversight of chemicals in the interim.

PubMed

Vogel, Sarah A; Roberts, Jody A

2011-05-01

The Toxic Substances Control Act gives the Environmental Protection Agency (EPA) the authority to regulate industrial chemicals not covered by other statutes. Today there are more than 83,000 such chemicals. However, the law is widely perceived as weak and outdated, and various stakeholders have called for its reform, citing the EPA's inability to regulate the use of asbestos, among other substances. We analyze the flaws in the act and suggest ways in which the EPA might better position itself to manage chemical risks and protect the public's health. In addition to the new tools and technologies it is adopting, the agency needs new allies-both inside and outside the government-in its efforts to identify and control hazardous chemicals.

Simulation system of arrhythmia using ActiveX control.

PubMed

Takeuchi, Akihiro; Hirose, Minoru; Hamada, Atsushi; Ikeda, Noriaki

2005-07-01

A simulation system for arrhythmias has been developed using Windows-based software technology, ActiveX control. The cardiac module consists of six cells, the sinus, atrium, AV node, ventricle, and ectopic foci. The physiological properties of the cells, the automaticity and conduction delay, were modelled, respectively, by the phase response curve and the excitability recovery curve. Cell functions were implemented in the ActiveX control and incorporated into the cardiac module. The system draws the ECG sequence as a ladder diagram in real time. The system interactively shows diverse arrhythmias for various user settings of the cell function and bidirectional conduction between the cells. Users are able to experiment virtually by setting up a so-called electrophysiological stimulation. This system is useful for learning and for teaching the interaction between the cells and arrhythmias.

The Evolution of Distance Learning: Technology-Mediated Interactive Learning.

ERIC Educational Resources Information Center

Dede, Christopher J.

1990-01-01

Summarizes a paper prepared for the Office of Technology Assessment (OTA) on the evolution of distance learning which begins by describing technological, the demographic, economic, political, and pedagogical forces involved. A new field is proposed called technology-mediated interactive learning (TMIL), which synthesizes distance learning,…

"The Most Poisonous Force in Technology"

ERIC Educational Resources Information Center

Carnevale, Dan

2007-01-01

Walt Mossberg, personal-technology columnist for "The Wall Street Journal," highlighted technology trends in his speech to a group of college presidents and other administrators. Mr. Mossberg touched a nerve when he called information-technology departments of large organizations, including colleges, "the most regressive and poisonous force in…

Technology and Reform-Based Science Education

ERIC Educational Resources Information Center

Dani, Danielle E.; Koenig, Kathleen M.

2008-01-01

Current reforms in science education call for the integration of digital technologies into science teaching, advocating that students learn science content and processes through technology. In this article, we provide practical examples, situated within the literature, of how digital technologies can be used to support the development and…

Systematic plan of building Web geographic information system based on ActiveX control

NASA Astrophysics Data System (ADS)

Zhang, Xia; Li, Deren; Zhu, Xinyan; Chen, Nengcheng

2003-03-01

A systematic plan of building Web Geographic Information System (WebGIS) using ActiveX technology is proposed in this paper. In the proposed plan, ActiveX control technology is adopted in building client-side application, and two different schemas are introduced to implement communication between controls in users¡ browser and middle application server. One is based on Distribute Component Object Model (DCOM), the other is based on socket. In the former schema, middle service application is developed as a DCOM object that communicates with ActiveX control through Object Remote Procedure Call (ORPC) and accesses data in GIS Data Server through Open Database Connectivity (ODBC). In the latter, middle service application is developed using Java language. It communicates with ActiveX control through socket based on TCP/IP and accesses data in GIS Data Server through Java Database Connectivity (JDBC). The first one is usually developed using C/C++, and it is difficult to develop and deploy. The second one is relatively easy to develop, but its performance of data transfer relies on Web bandwidth. A sample application is developed using the latter schema. It is proved that the performance of the sample application is better than that of some other WebGIS applications in some degree.

CALL FOR PAPERS: 13th International Conference on Force and Mass Measurement

NASA Astrophysics Data System (ADS)

1992-01-01

10 14 May 1993, Helsinki Fair Centre, Finland Scope of the Conference The Conference reports and reviews the state of the art and future trends in force and mass measurements in science and industry. Emphasis is on the applications of new methods, current problems in calibration and quality control, as well as on advancements in new sensor technologies and industrial application of force and mass measurements. Main Themes and Topics 1. The state of the art and development trends in force and mass measurements Development and stability of high level mass standards Mass comparators and force standard machine New research topics in mass and force 2. Calibration and quality control Calibration methods Estimation of uncertainties and classification of accuracies Relations between calibration, testing and quality control Requirements for quality control Verification of weighing instruments and their main devices 3. Application of force and mass measurements Automatic weighing Mass flow measurements Quality control in process industry Sensor technologies Practical applications Special applications in industry, trade, etc. Deadline for submission of abstracts: 30 June 1992. For further information please contact: Finnish Society of Automation, Asemapäällikönkatu 12C, SF-00520 HELSINKI, Finland Phone: Int. +3580 1461 644, Fax: Int. +3580 1461 650

Capability and Technology Performance Goals for the Next Step in Affordable Human Exploration of Space

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Sanders, Gerald B.; Taminger, Karen M.

2015-01-01

The capability for living off the land, commonly called in-situ resource utilization, is finally gaining traction in space exploration architectures. Production of oxygen from the Martian atmosphere is called an enabling technology for human return from Mars, and a flight demonstration to be flown on the Mars 2020 robotic lander is in development. However, many of the individual components still require technical improvements, and system-level trades will be required to identify the best combination of technology options. Based largely on work performed for two recent roadmap activities, this paper defines the capability and technology requirements that will need to be achieved before this game-changing capability can reach its full potential.

Technology Tips

ERIC Educational Resources Information Center

Santos-Trigo, Manuel

2004-01-01

A dynamic program for geometry called Cabri Geometry II is used to examine properties of figures like triangles and make connections with other mathematical ideas like ellipse. The technology tip includes directions for creating such a problem with technology and suggestions for exploring it.

Echolocation calls and communication calls are controlled differentially in the brainstem of the bat Phyllostomus discolor

PubMed Central

Fenzl, Thomas; Schuller, Gerd

2005-01-01

Background Echolocating bats emit vocalizations that can be classified either as echolocation calls or communication calls. Neural control of both types of calls must govern the same pool of motoneurons responsible for vocalizations. Electrical microstimulation in the periaqueductal gray matter (PAG) elicits both communication and echolocation calls, whereas stimulation of the paralemniscal area (PLA) induces only echolocation calls. In both the PAG and the PLA, the current thresholds for triggering natural vocalizations do not habituate to stimuli and remain low even for long stimulation periods, indicating that these structures have relative direct access to the final common pathway for vocalization. This study intended to clarify whether echolocation calls and communication calls are controlled differentially below the level of the PAG via separate vocal pathways before converging on the motoneurons used in vocalization. Results Both structures were probed simultaneously in a single experimental approach. Two stimulation electrodes were chronically implanted within the PAG in order to elicit either echolocation or communication calls. Blockade of the ipsilateral PLA site with iontophoretically application of the glutamate antagonist kynurenic acid did not impede either echolocation or communication calls elicited from the PAG. However, blockade of the contralateral PLA suppresses PAG-elicited echolocation calls but not communication calls. In both cases the blockade was reversible. Conclusion The neural control of echolocation and communication calls seems to be differentially organized below the level of the PAG. The PLA is an essential functional unit for echolocation call control before the descending pathways share again the final common pathway for vocalization. PMID:16053533

Cost Effectiveness Tradeoffs in Computer Standardization and Technology Insertion.

DTIC Science & Technology

1986-06-01

S MONITORING ORGANIZATION REPORT NUMBER(S) P-1931 6aNAME OF PERFORMING ORGANIZATION 16b OFFICE SYMBOL 7a NAME oF MONITORIG ORGANIZAIO0N Institute for...shown in the figure, is a circle with a symbolic V"valve" on top controlling a flow arrow that goes between a symbolic " cloud " (that also resembles a four...leaf clover) and the rectangle which represents the level. If the rate is an inflow, the arrow points to the level and the cloud is called a source

Japanese experiment module (JEM)

NASA Technical Reports Server (NTRS)

Kato, T.

1986-01-01

Japanese hardware elements studied during the definition phase of phase B are described. The hardware is called JEM (Japanese Experiment Module) and will be attached to the Space Station core. JEM consists of a pressurized module, an exposed facility, a scientific/equipment airlock, a local remote manipulator, and experimental logistic module. With all those hardware elements JEM will accommodate general scientific and technology development research (some of the elements are to utilize the advantage of the microgravity environment), and also accommodate control panels for the Space Station Mobile Remote Manipulator System and attached payloads.

Evaluation of the econo-mist device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Emission Control Technology Division (ECTD) was contacted by the General Services Administration (GSA) concerning a vapor injection device for use with automobile engines. The device is called the Econo-Mist and is a product of the FAP Corporation of Albuquerque, New Mexico. GSA had received information that the Econo-Mist reduced hydrocarbon and carbon monoxide emissions and increased fuel economy. At the request of GSA, ECTD agreed to test the device. A sample of the device was brought to the EPA laboratory in Ann Arbor, Michigan by FAP Corporation personnel on January 13, 1975.

Distrubtion Tolerant Network Technology Flight Validation Report: DINET

NASA Technical Reports Server (NTRS)

Jones, Ross M.

2009-01-01

In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

Distribution Tolerant Network Technology Flight Validation Report: DINET

NASA Technical Reports Server (NTRS)

Jones, Ross M.

2009-01-01

In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

DRIFTER Web App Development Support

NASA Technical Reports Server (NTRS)

Davis, Derrick D.; Armstrong, Curtis D.

2015-01-01

During my 2015 internship at Stennis Space Center (SSC) I supported the development of a web based tool to enable user interaction with a low-cost environmental monitoring buoy called the DRIFTER. DRIFTERs are designed by SSC's Applied Science and Technology Projects branch and are used to measure parameters such as water temperature and salinity. Data collected by the buoys help verify measurements by NASA satellites, which contributes to NASA's mission to advance understanding of the Earth by developing technologies to improve the quality of life on or home planet. My main objective during this internship was to support the development of the DRIFTER by writing web-based software that allows the public to view and access data collected by the buoys. In addition, this software would enable DRIFTER owners to configure and control the devices.

Building environment assessment and energy consumption estimation using smart phones

NASA Astrophysics Data System (ADS)

Li, Xiangli; Zhang, Li; Jia, Yingqi; Wang, Zihan; Jin, Xin; Zhao, Xuefeng

2017-04-01

In this paper, an APP for building indoor environment evaluation and energy consumption estimation based on Android platform is proposed and established. While using the APP, the smart phone built-in sensors are called for real-time monitoring of the building environmental information such as temperature, humidity and noise, etc. the built-in algorithm is developed to calculate the heat and power consumption, and questionnaires, grading and other methods are used to feed back to the space heating system. In addition, with the application of the technology of big data and cloud technology, the data collected by users will be uploaded to the cloud. After the statistics of the uploaded data, regional difference can be obtained, thus providing a more accurate basis for macro-control and research of energy, thermal comfort, greenhouse effect.

1:1 Technology and Computerized State Assessments

ERIC Educational Resources Information Center

Medlin, Shane A.

2016-01-01

American students in the 21st century are growing up with Internet accessible technology available at their fingertips. Considering this and the continued pressure to compete in a global society, The United States' Department of Education's National Education Technology Plan (NETP) (2010) calls for educators to leverage technology in order to…

Memex Meets Madonna: Multimedia at the Intersection of Information and Entertainment.

ERIC Educational Resources Information Center

Kinney, Thomas

1992-01-01

Proposes a personal information management technology called Memex-TV that might develop from advances in entertainment technology. Topics addressed include capabilities of the new system, system design, the scenario for development of Memex-TV as an entertainment technology spin-off, current entertainment technology trends, a typical evening with…

Self-Regulated Out-of-Class Language Learning with Technology

ERIC Educational Resources Information Center

Lai, Chun; Gu, Mingyue

2011-01-01

Current computer-assisted language learning (CALL) research has identified various potentials of technology for language learning. To realize and maximize these potentials, engaging students in self-initiated use of technology for language learning is a must. This study investigated Hong Kong university students' use of technology outside the…

The Effect of Design Teams on Preservice Teachers' Technology Integration

ERIC Educational Resources Information Center

Johnson, Laurene D.

2012-01-01

This study examined the effect of a specific instructional approach called design teams on preservice teachers' attitudes toward technology, their technology skills, and their Technological Pedagogical Content Knowledge (TPACK). In a design teams approach, participants work in collaborative teams to design solutions to solve real-world…

The Game Embedded CALL System to Facilitate English Vocabulary Acquisition and Pronunciation

ERIC Educational Resources Information Center

Young, Shelley Shwu-Ching; Wang, Yi-Hsuan

2014-01-01

The aim of this study is to make a new attempt to explore the potential of integrating game strategies with automatic speech recognition technologies to provide learners with individual opportunities for English pronunciation learning. The study developed the Game Embedded CALL (GeCALL) system with two activities for on-line speaking practice. For…

CALL in the Year 2000: A Look Back from 2016

ERIC Educational Resources Information Center

Chapelle, Carol A.

2016-01-01

This commentary offers a brief reflection on the state of CALL in 1997, when "Language Learning & Technology" was launched with my paper entitled "CALL in the year 2000: Still in search of research paradigms?" The point of my 1997 paper was to suggest the potential value of research on second language learning for the study…

How architecture wins technology wars.

PubMed

Morris, C R; Ferguson, C H

1993-01-01

Signs of revolutionary transformation in the global computer industry are everywhere. A roll call of the major industry players reads like a waiting list in the emergency room. The usual explanations for the industry's turmoil are at best inadequate. Scale, friendly government policies, manufacturing capabilities, a strong position in desktop markets, excellent software, top design skills--none of these is sufficient, either by itself or in combination, to ensure competitive success in information technology. A new paradigm is required to explain patterns of success and failure. Simply stated, success flows to the company that manages to establish proprietary architectural control over a broad, fast-moving, competitive space. Architectural strategies have become crucial to information technology because of the astonishing rate of improvement in microprocessors and other semiconductor components. Since no single vendor can keep pace with the outpouring of cheap, powerful, mass-produced components, customers insist on stitching together their own local systems solutions. Architectures impose order on the system and make the interconnections possible. The architectural controller is the company that controls the standard by which the entire information package is assembled. Microsoft's Windows is an excellent example of this. Because of the popularity of Windows, companies like Lotus must conform their software to its parameters in order to compete for market share. In the 1990s, proprietary architectural control is not only possible but indispensable to competitive success. What's more, it has broader implications for organizational structure: architectural competition is giving rise to a new form of business organization.

(abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

Accelerated Innovation Pilot

NASA Technical Reports Server (NTRS)

Davis, Jeffrey

2012-01-01

Opportunities: I. Engage NASA team (examples) a) Research and technology calls . provide suggestions to AES, HRP, OCT. b) Use NASA@Work to solicit other ideas; (possibly before R+D calls). II. Stimulate collaboration (examples) a) NHHPC. b) Wharton Mack Center for Technological Innovation (Feb 2013). c) International ] DLR ] :envihab (July 2013). d) Accelerated research models . NSF, Myelin Repair Foundation. III. Engage public Prizes (open platform: InnoCentive, yet2.com, NTL; Rice Business Plan, etc.) IV. Use same methods to engage STEM.

Marketing technology in macroeconomics.

PubMed

Tamegawa, Kenichi

2012-01-01

In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

Learning Practice and Technology: Extending the Structurational Practice Lens to Educational Technology Research

ERIC Educational Resources Information Center

Halperin, Ruth

2017-01-01

Scholars in the field of educational technology have been calling for robust use of social theory within learning technology research. In view of that, interest has been noted in applying Giddens' structuration theory to the understanding of human interaction with technology in learning settings. However, only few such attempts have been published…

KSC-2011-4156

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- University students wait their turn to compete in NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida taking place near the complex's Rocket Garden. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4014

NASA Image and Video Library

2011-05-26

CAPE CANAVERAL, Fla. -- Pat Simpkins, Kennedy Space Center engineering director talks to university students gathered for the opening ceremony of NASA's second annual Lunabotics Mining Competition at the Kennedy Space Center Visitor Complex in Florida. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jim Grossmann

KSC-2011-4147

NASA Image and Video Library

2011-05-27

CAPE CANAVERAL, Fla. -- Outside the "Lunarena" at the Kennedy Space Center Visitor Complex in Florida, NASA astronaut John McBride (center) discusses the day's events with event leaders during NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India will participate in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4170

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, the Laurentian University Team from Ontario, accepts a check for its "lunabot," which came in first place at NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4168

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, Bill Moore, Visitor Complex chief operating officer speaks to university students at the award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

KSC-2011-4165

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, Rob Mueller Kennedy's chief of the Surface Systems Office speaks to university students at the award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

Multimedia and Business Education.

ERIC Educational Resources Information Center

Klemin, V. Wayne

1993-01-01

Old technology (the computer) coupled with borrowed technology (television, film, and stereo) complemented by multimedia standards from IBM, Apple, and the MPC Council and linked by new software form a new technology called multimedia, being used in education and in business training. (Author/JOW)

78 FR 77024 - Telemarketing Sales Rule; Notice of Termination of Caller ID Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

..., data mining and anomaly detection, and call-blocking technology). \\19\\ AT&T Servs., Inc., No. 00040, at... technically feasible, by looking at the signaling data . . . to distinguish between a CPN [calling party...

Outsourcing an Effective Postdischarge Call Program

PubMed Central

Meek, Kevin L.; Williams, Paula; Unterschuetz, Caryn J.

2018-01-01

To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge. PMID:29494453

Role of information systems in controlling costs: the electronic medical record (EMR) and the high-performance computing and communications (HPCC) efforts

NASA Astrophysics Data System (ADS)

Kun, Luis G.

1994-12-01

On October 18, 1991, the IEEE-USA produced an entity statement which endorsed the vital importance of the High Performance Computer and Communications Act of 1991 (HPCC) and called for the rapid implementation of all its elements. Efforts are now underway to develop a Computer Based Patient Record (CBPR), the National Information Infrastructure (NII) as part of the HPCC, and the so-called `Patient Card'. Multiple legislative initiatives which address these and related information technology issues are pending in Congress. Clearly, a national information system will greatly affect the way health care delivery is provided to the United States public. Timely and reliable information represents a critical element in any initiative to reform the health care system as well as to protect and improve the health of every person. Appropriately used, information technologies offer a vital means of improving the quality of patient care, increasing access to universal care and lowering overall costs within a national health care program. Health care reform legislation should reflect increased budgetary support and a legal mandate for the creation of a national health care information system by: (1) constructing a National Information Infrastructure; (2) building a Computer Based Patient Record System; (3) bringing the collective resources of our National Laboratories to bear in developing and implementing the NII and CBPR, as well as a security system with which to safeguard the privacy rights of patients and the physician-patient privilege; and (4) utilizing Government (e.g. DOD, DOE) capabilities (technology and human resources) to maximize resource utilization, create new jobs and accelerate technology transfer to address health care issues.

Soft Robotics: from scientific challenges to technological applications

NASA Astrophysics Data System (ADS)

Laschi, C.

2016-05-01

Soft robotics is a recent and rapidly growing field of research, which aims at unveiling the principles for building robots that include soft materials and compliance in the interaction with the environment, so as to exploit so-called embodied intelligence and negotiate natural environment more effectively. Using soft materials for building robots poses new technological challenges: the technologies for actuating soft materials, for embedding sensors into soft robot parts, for controlling soft robots are among the main ones. This is stimulating research in many disciplines and many countries, such that a wide community is gathering around initiatives like the IEEE TAS TC on Soft Robotics and the RoboSoft CA - A Coordination Action for Soft Robotics, funded by the European Commission. Though still in its early stages of development, soft robotics is finding its way in a variety of applications, where safe contact is a main issue, in the biomedical field, as well as in exploration tasks and in the manufacturing industry. And though the development of the enabling technologies is still a priority, a fruitful loop is growing between basic research and application-oriented research in soft robotics.

Refrigerated fruit juices: quality and safety issues.

PubMed

Esteve, Maria Jose; Frígola, Ana

2007-01-01

Fruit juices are an important source of bioactive compounds, but techniques used for their processing and subsequent storage may cause alterations in their contents so they do not provide the benefits expected by the consumer. In recent years consumers have increasingly sought so-called "fresh" products (like fresh products), stored in refrigeration. This has led the food industry to develop alternative processing technologies to produce foods with a minimum of nutritional, physicochemical, or organoleptic changes induced by the technologies themselves. Attention has also focused on evaluating the microbiological or toxicological risks that may be involved in applying these processes, and their effect on food safety, in order to obtain safe products that do not present health risks. This concept of minimal processing is currently becoming a reality with conventional technologies (mild pasteurization) and nonthermal technologies, some recently introduced (pasteurization by high hydrostatic pressure) and some perhaps with a more important role in the future (pulsed electric fields). Nevertheless, processing is not the only factor that affects the quality of these products. It is also necessary to consider the conditions for refrigerated storage and to control time and temperature.

Screening Methodologies to Support Risk and Technology ...

EPA Pesticide Factsheets

The Clean Air Act establishes a two-stage regulatory process for addressing emissions of hazardous air pollutants (HAPs) from stationary sources. In the first stage, the Act requires the EPA to develop technology-based standards for categories of industrial sources. We have largely completed the required “Maximum Achievable Control Technology” (MACT) standards. In the second stage of the regulatory process, EPA must review each MACT standard at least every eight years and revise them as necessary, “taking into account developments in practices, processes and control technologies.” We call this requirement the “technology review.” EPA is also required to complete a one-time assessment of the health and environmental risks that remain after sources come into compliance with MACT. This residual risk review also must be done within 8 years of setting the initial MACT standard. If additional risk reductions are necessary to protect public health with an ample margin of safety or to prevent adverse environmental effects, EPA must develop standards to address these remaining risks. Because the risk review is an important component of the RTR process, EPA is seeking SAB input on the scientific credibility of specific enhancements made to our risk assessment methodologies, particularly with respect to screening methodologies, since the last SAB review was completed in 2010. These enhancements to our risk methodologies are outlined in the document title

Mathematics Teacher TPACK Standards and Development Model

ERIC Educational Resources Information Center

Niess, Margaret L.; Ronau, Robert N.; Shafer, Kathryn G.; Driskell, Shannon O.; Harper, Suzanne R.; Johnston, Christopher; Browning, Christine; Ozgun-Koca, S. Asli; Kersaint, Gladis

2009-01-01

What knowledge is needed to teach mathematics with digital technologies? The overarching construct, called technology, pedagogy, and content knowledge (TPACK), has been proposed as the interconnection and intersection of technology, pedagogy, and content knowledge. Mathematics Teacher TPACK Standards offer guidelines for thinking about this…

The Call to Duty: An Historic Overview of How Education Responds to Changes in the Economy

ERIC Educational Resources Information Center

Sky Lark, Taj'ullah

2011-01-01

An educated populace is vital to economic growth. Throughout the history of education in America, society has found it necessary to call upon education to address its economic challenges. During the twentieth century, the call for education to address technological advances, economic inequities, and to rescue free enterprise was dire. The U.S.…

Dulce Wireless Tijuana: A Randomized Control Trial Evaluating the Impact of Project Dulce and Short-Term Mobile Technology on Glycemic Control in a Family Medicine Clinic in Northern Mexico

PubMed Central

Contreras, Sonia; Vargas-Ojeda, Adriana; Menchaca-Díaz, Rufino; Fortmann, Addie; Philis-Tsimikas, Athena

2016-01-01

Abstract Background: The global epidemic of diabetes calls for innovative interventions. This study evaluated the effectiveness of the Project Dulce model, with and without wireless technology, on glycemic control and other clinical and self-reported outcomes in patients with poorly controlled type 2 diabetes in Mexico. Subjects and Methods: Adults with type 2 diabetes and a glycated hemoglobin A1c (HbA1c) level of ≥8% were recruited from Family Medical Unit #27 of the Instituto Mexicano del Seguro Social (IMSS) in Tijuana, México, and randomly assigned to one of three groups: Project Dulce–only (PD); Project Dulce technology-enhanced with mobile tools (PD-TE); or IMSS standard of care/control group (CG). Clinical and self-reported outcomes were assessed at baseline, Month 4, and Month 10. Time-by-group interactions and within-group changes were analyzed. Results: HbA1c reductions from baseline to Month 10 were significantly greater in PD-TE (−3.0% [−33 mmol/mol]) and PD (−2.6% [−28.7 mmol/mol]) compared with CG (−1.3% [−14.2 mmol/mol]) (P = 0.009 and 0.001, respectively). PD-TE and PD also exhibited significant improvement in diabetes knowledge when compared with CG (P < 0.05 for both). No statistically significant differences were detected between PD and PD-TE on these indicators (P = 0.54 and 0.86, respectively). Several within-group improvements were observed on other clinical and self-report indicators but did not vary significantly across groups. Conclusions: Project Dulce with and without wireless technology substantially improved glycemic control and diabetes knowledge in high-risk patients with type 2 diabetes in a Mexican family medical unit, suggesting that integrating peer-led education, nurse coordination, and 3G wireless technology is an effective approach for improving diabetes outcomes in high-risk populations. PMID:26914371

Bernard Stiegler's Philosophy of Technology: Invention, Decision, and Education in Times of Digitization

ERIC Educational Resources Information Center

Kouppanou, Anna

2015-01-01

Bernard Stiegler's concept of individuation suggests that the human being is co-constituted with technology. Technology precedes the individual in the respect that the latter is thrown in a technological world that always already contains externally inscribed memories--what he calls tertiary memories--that selectively form the individual and the…

Integration of e-Management, e-Development and e-Learning Technologies for Blended Course Delivery

ERIC Educational Resources Information Center

Johnson, Lynn E.; Tang, Michael

2005-01-01

This paper describes and assesses a pre-engineering curriculum development project called Foundations of Engineering, Science and Technology (FEST). FEST integrates web-based technologies into an inter-connected system to enable delivery of a blended program at multiple institutions. Tools and systems described include 1) technologies to deliver…

78 FR 78838 - National Medal of Technology and Innovation Call for 2014 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... development of technological manpower, you may obtain a nomination form from: http://www.uspto.gov/about/nmti... to the development of technological manpower, for the improvement of the economic, environmental or...'s technological manpower has had a profound and significant impact on our economy and way of life...

Transforming American Education: Learning Powered by Technology. National Education Technology Plan, 2010

ERIC Educational Resources Information Center

US Department of Education, 2010

2010-01-01

This report presents the Administration's National Education Technology Plan. This plan calls for applying the advanced technologies used in everyone's daily personal and professional lives to the entire education system to improve student learning, accelerate and scale up the adoption of effective practices, and use data and information for…

Does Online Technology Make Us More or Less Sociable? A Preliminary Review and Call for Research.

PubMed

Waytz, Adam; Gray, Kurt

2018-05-01

How does online technology affect sociability? Emerging evidence-much of it inconclusive-suggests a nuanced relationship between use of online technology (the Internet, social media, and virtual reality) and sociability (emotion recognition, empathy, perspective taking, and emotional intelligence). Although online technology can facilitate purely positive behavior (e.g., charitable giving) or purely negative behavior (e.g., cyberbullying), it appears to affect sociability in three ways, depending on whether it allows a deeper understanding of people's thoughts and feelings: (a) It benefits sociability when it complements already-deep offline engagement with others, (b) it impairs sociability when it supplants deeper offline engagement for superficial online engagement, and (c) it enhances sociability when deep offline engagement is otherwise difficult to attain. We suggest potential implications and moderators of technology's effects on sociability and call for additional causal research.

A comparison of calls subjected to a malpractice claim versus 'normal calls' within the Swedish healthcare direct: a case-control study.

PubMed

Ernesäter, Annica; Engström, Maria; Winblad, Ulrika; Holmström, Inger K

2014-10-03

The purpose of this study is to compare communication patterns in calls subjected to a malpractice claim with matched controls. In many countries, telephone advice nursing is patients' first contact with healthcare. Telenurses' assessment of callers' symptoms and needs are based on verbal communication only, and problems with over-triage and under-triage have been reported. A total sample of all reported medical errors (n=33) during the period 2003-2010 within Swedish Healthcare Direct was retrieved. Corresponding calls were thereafter identified and collected as sound files from the manager in charge at the respective call centres. For technical reasons, calls from four of the cases were not possible to retrieve. For the present study, matched control calls (n=26) based on the patient's age, gender and main symptom presented by the caller were collected. Male patients were in majority (n=16), and the most common reasons for calling were abdominal pain (n=10) and chest pain (n=5). There were statistically significant differences between the communication in the cases and controls: telenurses used fewer open-ended medical questions (p<0.001) in the cases compared to the control calls; callers provided telenurses with more medical information in the control calls compared to the cases (p=0.001); and telenurses used more facilitation and patient activation activities in the control calls (p=0.034), such as back-channel response (p=0.001), compared to the cases. The present study shows that telenurses in malpractice claimed calls used more closed-ended questioning compared to those in control calls, who used more open-ended questioning and back-channel response, which provided them with richer medical descriptions and more information from the caller. Hence, these communicative techniques are important in addition to solid medical and nursing competence and sound decision aid systems. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

National AIDS Hotline: HIV and AIDS information service through a toll-free telephone system.

PubMed Central

Waller, R R; Lisella, L W

1991-01-01

The National AIDS Hotline (NAH), a service of the Centers for Disease Control (CDC), is an information resource for the population of the United States, its Territories, and Puerto Rico concerning the human immunodeficiency virus (HIV) and acquired immunodeficiency syndrome (AIDS). Since its inception in 1983, NAH has grown to be the world's largest health-related hotline service. NAH has received an average of more than 1.4 million calls per year since October 1987. Services of NAH include responding to the public's questions about HIV and AIDS and providing referrals to State and local resources. All services, including HIV and AIDS publications, are provided free of charge. The public contacts NAH 24 hours a day, 7 days a week, through a toll-free telephone system. Services are available to English-speaking, Spanish-speaking, and deaf populations. Each service has its own telephone number--English-speaking, 1-800-342-2437; Spanish-speaking, 1-800-344-7432; TTY service for the deaf, 1-800-243-7889. NAH employs approximately 170 information specialists to answer calls. The facility uses modern telecommunications technology to effectively manage and direct calls to 43 work stations. Each work station is supported by a personal computer that allows access to CDC's National AIDS Clearinghouse data bases for referrals and publication ordering. NAH ensures that information provided to the public is current, accurate, and consistent with approved government policy. Quality assurance reviews address call management, delivery of information, and content of calls. PMID:1659708

78 FR 59013 - President's Council of Advisors on Science and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... Cyber-security report. DATES: The public conference call will be held on Monday, October 7, 2013, from 4.... to 4:30 p.m. (ET) During the conference call, PCAST will discuss its Cyber-security report...

Cancer risks related to low-level RF/MW exposures, including cell phones.

PubMed

Szmigielski, Stanislaw

2013-09-01

For years, radiofrequency (RF) and microwave (MW) radiations have been applied in the modern world. The rapidly increasing use of cellular phones called recent attention to the possible health risks of RF/MW exposures. In 2011, a group of international experts organized by IARC (International Agency for Research on Cancer in Lyon) concluded that RF/MW radiations should be listed as a possible carcinogen (group 2B) for humans. Three meta-analyses of case-control studies have concluded that using cell phones for more than ten years was associated with an increase in the overall risk of developing a brain tumor. The Interphone Study, the largest health-related case-control international study of use of cell phones and head and neck tumors, showed no statistically significant increases in brain cancers related to higher amounts of cell phone use, but excess risk in a small subgroup of more heavily exposed users associated with latency and laterality was reported. So far, the published studies do not show that mobile phones could for sure increase the risk of cancer. This conclusion is based on the lack of a solid biological mechanism, and the fact that brain cancer rates are not going up significantly. However, all of the studies so far have weaknesses, which make it impossible to entirely rule out a risk. Mobile phones are still a new technology and there is little evidence about effects of long-term use. For this reason, bioelectromagnetic experts advise application of a precautionary resources. It suggests that if people want to use a cell phone, they can choose to minimize their exposure by keeping calls short and preferably using hand-held sets. It also advises discouraging children from making non essential calls as well as also keeping their calls short.

Evaluation of the Texas Technology Immersion Pilot: Third-Year (2006-07) Traits of Higher Technology Immersion Schools and Teachers

ERIC Educational Resources Information Center

Shapley, Kelly; Maloney, Catherine; Caranikas-Walker, Fanny; Sheehan, Daniel

2008-01-01

The Technology Immersion Pilot (TIP), created by the Texas Legislature in 2003, called for the Texas Education Agency (TEA) to establish a pilot project to "immerse" schools in technology by providing a wireless mobile computing device for each teacher and student, technology-based learning resources, training for teachers to integrate…

Los Alamos Team Demonstrates Bottle Scanner Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Espy, Michelle; Schultz, Larry

2014-05-06

Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

Los Alamos Team Demonstrates Bottle Scanner Technology

ScienceCinema

Espy, Michelle; Schultz, Larry

2018-02-13

Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

Development of Test Rig for Robotization of Mining Technological Processes - Oversized Rock Breaking Process Case

NASA Astrophysics Data System (ADS)

Pawel, Stefaniak; Jacek, Wodecki; Jakubiak, Janusz; Zimroz, Radoslaw

2017-12-01

Production chain (PCh) in underground copper ore mine consists of several subprocesses. From our perspective implementation of so called ZEPA approach (Zero Entry Production Area) might be very interesting [16]. In practice, it leads to automation/robotization of subprocesses in production area. In this paper was investigated a specific part of PCh i.e. a place when cyclic transport by LHDs is replaced with continuous transport by conveying system. Such place is called dumping point. The objective of dumping points with screen is primary classification of the material (into coarse and fine material) and breaking oversized rocks with hydraulic hammer. Current challenges for the underground mining include e.g. safety improvement as well as production optimization related to bottlenecks, stoppages and operational efficiency of the machines. As a first step, remote control of the hydraulic hammer has been introduced, which not only transferred the operator to safe workplace, but also allowed for more comfortable work environment and control over multiple technical objects by a single person. Today literature analysis shows that current mining industry around the world is oriented to automation and robotization of mining processes and reveals technological readiness for 4th industrial revolution. The paper is focused on preliminary analysis of possibilities for the use of the robotic system to rock-breaking process. Prototype test rig has been proposed and experimental works have been carried out. Automatic algorithms for detection of oversized rocks, crushing them as well as sweeping and loosening of material have been formulated. Obviously many simplifications have been assumed. Some near future works have been proposed.

Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology.

PubMed

Freitas, Sergio; Merkle, Hans P; Gander, Bruno

2005-02-02

The therapeutic benefit of microencapsulated drugs and vaccines brought forth the need to prepare such particles in larger quantities and in sufficient quality suitable for clinical trials and commercialisation. Very commonly, microencapsulation processes are based on the principle of so-called "solvent extraction/evaporation". While initial lab-scale experiments are frequently performed in simple beaker/stirrer setups, clinical trials and market introduction require more sophisticated technologies, allowing for economic, robust, well-controllable and aseptic production of microspheres. To this aim, various technologies have been examined for microsphere preparation, among them are static mixing, extrusion through needles, membranes and microfabricated microchannel devices, dripping using electrostatic forces and ultrasonic jet excitation. This article reviews the current state of the art in solvent extraction/evaporation-based microencapsulation technologies. Its focus is on process-related aspects, as described in the scientific and patent literature. Our findings will be outlined according to the four major substeps of microsphere preparation by solvent extraction/evaporation, namely, (i) incorporation of the bioactive compound, (ii) formation of the microdroplets, (iii) solvent removal and (iv) harvesting and drying the particles. Both, well-established and more advanced technologies will be reviewed.

La conception, la modelisation et la simulation du systeme VSC-HVDC offshore

NASA Astrophysics Data System (ADS)

Benhalima, Seghir

Wind energy is recognized worldwide as a proven technology to meet the growing demands of green sustainable energy. To exploit this stochastic energy source and put together with the conventional energy sources without affecting the performance of existing electrical grids, several research projects have been achieved. In addition, at ocean level, wind energy has a great potential. It means that the production of this energy will increase in the world. The optimal extraction of this energy source needs to be connected to the grid via a voltage source converter which plays the role of interface. To minimise losses due to the transport of energy at very long distances, the technology called High Voltage Direct Current based on Voltage Source Converter (VSC-HVDC) is used. To achieve this goal, a new topology is designed with a new control algorithm based on control of power generated by the wind farm, the DC voltage regulation and the synchronization between wind farm and VSC-HVDC (based on NPC). The proposed topology and its control technique are validated using the "MATLAB/Simulink program". The results are promising, because the THD is less than 5% and the power factor is close to one.

Fly ash system technology improves opacity

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2007-06-15

Unit 3 of the Dave Johnston Power Plant east of Glenrock, WY, USA had problems staying at or below the opacity limits set by the state. The unit makes use of a Lodge Cottrell precipitator. When the plant changed to burning Power River Basin coal, ash buildup became a significant issue as the fly ash control system was unable to properly evacuate hoppers on the unit. To overcome the problem, the PLC on the unit was replaced with a software optimization package called SmartAsh for the precipitator fly ash control system, at a cost of $500,000. After the upgrade, theremore » have been no plugged hoppers and the opacity has been reduced from around 20% to 3-5%. 2 figs.« less

Environmental Control and Life Support Systems Test Facility at MSFC

NASA Technical Reports Server (NTRS)

2001-01-01

The Marshall Space Flight Center (MSFC) is responsible for designing and building the life support systems that will provide the crew of the International Space Station (ISS) a comfortable environment in which to live and work. Scientists and engineers at the MSFC are working together to provide the ISS with systems that are safe, efficient, and cost-effective. These compact and powerful systems are collectively called the Environmental Control and Life Support Systems, or simply, ECLSS. This photograph shows the development Water Processor located in two racks in the ECLSS test area at the Marshall Space Flight Center. Actual waste water, simulating Space Station waste, is generated and processed through the hardware to evaluate the performance of technologies in the flight Water Processor design.

Report on Higher Education Technology.

ERIC Educational Resources Information Center

New Jersey State Commission on Higher Education.

Recognizing the rapid development of telecommunications and networking technologies and their growing importance to higher education and New Jersey's overall economic competitiveness, New Jersey's Plan for Higher Education called for the Commission on Higher Education and the Presidents' Council to appoint a Higher Education Technology Task Force…

New Weapons in the Toad Toolkit: A Review of Methods to Control and Mitigate the Biodiversity Impacts of Invasive Cane Toads (Rhinella Marina).

PubMed

Tingley, Reid; Ward-Fear, Georgia; Schwarzkopf, Lin; Greenlees, Matthew J; Phillips, Benjamin L; Brown, Gregory; Clulow, Simon; Webb, Jonathan; Capon, Robert; Sheppard, Andy; Strive, Tanja; Tizard, Mark; Shine, Richard

2017-06-01

Our best hope of developing innovative methods to combat invasive species is likely to come from the study of high-profile invaders that have attracted intensive research not only into control, but also basic biology. Here we illustrate that point by reviewing current thinking about novel ways to control one of the world’s most well-studied invasions: that of the cane toad in Australia. Recently developed methods for population suppression include more effective traps based on the toad’s acoustic and pheromonal biology. New tools for containing spread include surveillance technologies (e.g., eDNA sampling and automated call detectors), as well as landscape-level barriers that exploit the toad’s vulnerability to desiccation—a strategy that could be significantly enhanced through the introduction of sedentary, range-core genotypes ahead of the invasion front. New methods to reduce the ecological impacts of toads include conditioned taste aversion in free-ranging predators, gene banking, and targeted gene flow. Lastly, recent advances in gene editing and gene drive technology hold the promise of modifying toad phenotypes in ways that may facilitate control or buffer impact. Synergies between these approaches hold great promise for novel and more effective means to combat the toad invasion and its consequent impacts on biodiversity.

XPAT: a toolkit to conduct cross-platform association studies with heterogeneous sequencing datasets.

PubMed

Yu, Yao; Hu, Hao; Bohlender, Ryan J; Hu, Fulan; Chen, Jiun-Sheng; Holt, Carson; Fowler, Jerry; Guthery, Stephen L; Scheet, Paul; Hildebrandt, Michelle A T; Yandell, Mark; Huff, Chad D

2018-04-06

High-throughput sequencing data are increasingly being made available to the research community for secondary analyses, providing new opportunities for large-scale association studies. However, heterogeneity in target capture and sequencing technologies often introduce strong technological stratification biases that overwhelm subtle signals of association in studies of complex traits. Here, we introduce the Cross-Platform Association Toolkit, XPAT, which provides a suite of tools designed to support and conduct large-scale association studies with heterogeneous sequencing datasets. XPAT includes tools to support cross-platform aware variant calling, quality control filtering, gene-based association testing and rare variant effect size estimation. To evaluate the performance of XPAT, we conducted case-control association studies for three diseases, including 783 breast cancer cases, 272 ovarian cancer cases, 205 Crohn disease cases and 3507 shared controls (including 1722 females) using sequencing data from multiple sources. XPAT greatly reduced Type I error inflation in the case-control analyses, while replicating many previously identified disease-gene associations. We also show that association tests conducted with XPAT using cross-platform data have comparable performance to tests using matched platform data. XPAT enables new association studies that combine existing sequencing datasets to identify genetic loci associated with common diseases and other complex traits.

Outsourcing an Effective Postdischarge Call Program: A Collaborative Approach.

PubMed

Meek, Kevin L; Williams, Paula; Unterschuetz, Caryn J

To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge.

Decades of CALL Development: A Retrospective of the Work of James Pusack and Sue Otto

ERIC Educational Resources Information Center

Otto, Sue E. K.

2010-01-01

In this article, the author describes a series of projects that James Pusack and the author engaged in together, a number of them to develop CALL authoring tools. With their shared love of technology and dedication to language teaching and learning, they embarked on a long and immensely enjoyable career in CALL during which each project evolved…

Examining the Teaching of Science, and Technology and Engineering Content and Practices: An Instrument Modification Study

ERIC Educational Resources Information Center

Love, Tyler S.; Wells, John G.; Parkes, Kelly A.

2017-01-01

A modified Reformed Teaching Observation Protocol (RTOP) (Piburn & Sawada, 2000) instrument was used to separately examine eight technology and engineering (T&E) educators' teaching of science, and T&E content and practices, as called for by the "Standards for Technological Literacy: Content for the Study of Technology"…

Evaluation of the Texas Technology Immersion Pilot: Outcomes for the Third Year (2006-07)

ERIC Educational Resources Information Center

Shapley, Kelly; Sheehan, Daniel; Maloney, Catherine; Caranikas-Walker, Fanny

2008-01-01

The Technology Immersion Pilot (TIP), created by the Texas Legislature in 2003, set forth a vision for technology immersion in public schools. Senate Bill 396 called for the Texas Education Agency (TEA) to establish a pilot project to "immerse" schools in technology by providing a wireless mobile computing device for each teacher and…

Exploring Adult Learners Usage of Information Communication Technology during a Virtual Peer Coaching Experience

ERIC Educational Resources Information Center

Ladyshewsky, Richard; Pettapiece, Ronald G.

2015-01-01

The purpose of this study was to explore how post-graduate students in a fully online business course used information communication technology during a virtual peer coaching experience. In this exploration of technology use it was found students required additional guidance in the use of technologies such as email, telephone calling, and more…

Constructivism as a Theoretical Foundation for the Use of Technology in Social Studies

ERIC Educational Resources Information Center

Doolittle, Peter E.; Hicks, David

2003-01-01

The National Council for the Social Studies has explicitly advocated technology integration into the social studies classroom to transform the teaching and learning of key social studies content and skills. While the call for technology integration into the social studies classroom is clear, the application of technology within the realm of social…

Educational Technology. Special Hearing before a Subcommittee of the Committee on Appropriations. United States Senate, One Hundred Fourth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Appropriations.

This document presents witness testimony and supplemental materials from a Congressional hearing called to assess the effectiveness of federally funded educational technology programs, particularly Technology for Education, Star Schools, Ready to Learn Television, and Mathline. Other educational technologies were introduced at the hearing as well,…

A New Role for Music Technology: Enhancing Literacy

ERIC Educational Resources Information Center

Nardo, Rachel

2009-01-01

General music teachers have a technology tool that not only helps students sing better, it helps them read better! Carry-a-Tune or Singing Coach--the technology that received a rave review from former "General Music Today" technology columnist Kirk Kassner in 2005--is now being offered in an enhanced version called TUNEin[TM] to READING.…

English Teachers' Cultural Models about Technology: A Microethnographic Perspective on Professional Development

ERIC Educational Resources Information Center

Curwood, Jen Scott

2014-01-01

Prompted by calls for research on technology-focused professional development, this ethnographic case study investigates how teachers' participation in learning communities may influence technology integration within the secondary English curriculum. In this article, I draw on educational psychology, cognitive anthropology, and sociolinguistics to…

Collaborative Professional Development in Higher Education: Developing Knowledge of Technology Enhanced Teaching

ERIC Educational Resources Information Center

Jaipal-Jamani, Kamini; Figg, Candace; Gallagher, Tiffany; Scott, Ruth McQuirter; Ciampa, Katia

2015-01-01

This paper describes a professional development initiative for teacher educators, called the "Digital Pedagogies Collaboration," in which the goal was to build faculty knowledge about technology enhanced teaching (TPACK knowledge), develop a collaborative learning and research community of faculty members around technology enhanced…

Rust in Peace: Finding Hope for the Future in the Graveyards of Technology.

ERIC Educational Resources Information Center

Jungk, Robert

1984-01-01

When a form of high technology becomes obsolete, many people acquire a fear and distrust of the future--a neurosis called the ruins complex. But humanity can respond positively to the ghosts of dead technology and invent a hopeful future. (Author/RM)

Information Technology and the Third Industrial Revolution.

ERIC Educational Resources Information Center

Fitzsimmons, Joe

1994-01-01

Discusses the so-called third industrial revolution, or the information revolution. Topics addressed include the progression of the revolution in the U.S. economy, in Europe, and in Third World countries; the empowering technologies, including digital switches, optical fiber, semiconductors, CD-ROM, networks, and combining technologies; and future…

Art and Technology.

ERIC Educational Resources Information Center

Lamal, Pauline Dove

Art has always adapted technological advances to its own uses. In the last 15 years, art has turned to color photocopiers, computers, mimeograph machines, and thermofax copiers. With this in mind, Central Piedmont Community College began offering a course in 1982 called "Art and Technology" which focused on the application of office…

Technology for Science: Overview of the Project.

ERIC Educational Resources Information Center

Crismond, David; And Others

Technology for Science is a National Science Foundation funded program that is developing and testing curriculum units for teacher materials built around a series of design-oriented science problems called "challenges," mainly for ninth-grade general and physical science classes. Technology for science challenges have a clear connection…

Design optimization for cost and quality: The robust design approach

NASA Technical Reports Server (NTRS)

Unal, Resit

1990-01-01

Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

Environmental Control and Life Support Systems Testing Facility at MSFC

NASA Technical Reports Server (NTRS)

2001-01-01

The Marshall Space Flight Center (MSFC) is responsible for designing and building the life support systems that will provide the crew of the International Space Station (ISS) a comfortable environment in which to live and work. Scientists and engineers at the MSFC are working together to provide the ISS with systems that are safe, efficient, and cost-effective. These compact and powerful systems are collectively called the Environmental Control and Life Support Systems, or simply, ECLSS. This photograph shows the fifth generation Urine Processor Development Hardware. The Urine Processor Assembly (UPA) is a part of the Water Recovery System (WRS) on the ISS. It uses a chase change process called vapor compression distillation technology to remove contaminants from urine. The UPA accepts and processes pretreated crewmember urine to allow it to be processed along with other wastewaters in the Water Processor Assembly (WPA). The WPA removes free gas, organic, and nonorganic constituents before the water goes through a series of multifiltration beds for further purification. Product water quality is monitored primarily through conductivity measurements. Unacceptable water is sent back through the WPA for reprocessing. Clean water is sent to a storage tank.

Applying Metabolomics to differentiate amphibian responses ...

EPA Pesticide Factsheets

Introduction/Objectives/Methods One of the biggest challenges in ecological risk assessment is determining the impact of multiple stressors on individual organisms and populations in ‘real world’ scenarios. Emerging ‘omic technologies, notably, metabolomics, provides an opportunity to address the uncertainties surrounding ecological risk assessment of multiple stressors. The objective of this study was to use a metabolomics biomarker approach to investigate the effect of multiple stressors on amphibian metamorphs. To this end, metamorphs of Rana pipiens (northern leopard frogs) were exposed to the insecticide Carbaryl (0.32 μg/L), a conspecific predator alarm call (Lithobates catesbeianus), Carbaryl and the predator alarm call, and a control with no stressor. In addition to metabolomic fingerprinting, we measured corticosterone levels in each treatment to assess general stress response. We analyzed relative abundances of endogenous metabolites collected in liver tissue with gas chromatography coupled with mass spectrometry. Support vector machine (SVM) methods with recursive feature elimination (RFE) were applied to rank the metabolomic profiles produced. Results/Conclusions SVM-RFE of the acquired metabolomic spectra demonstrated 85-96% classification accuracy among control and all treatment groups when using the top 75 ranked retention time bins. Biochemical fluxes observed in the groups exposed to carbaryl, predation threat, and the combined treatmen

An artificial reality environment for remote factory control and monitoring

NASA Technical Reports Server (NTRS)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

Work has begun on the merger of two well known systems, VEOS (HITLab) and CLIPS (NASA). In the recent past, the University of Massachusetts Lowell developed a parallel version of NASA CLIPS, called P-CLIPS. This modification allows users to create smaller expert systems which are able to communicate with each other to jointly solve problems. With the merger of a VEOS message system, PCLIPS-V can now act as a group of entities working within VEOS. To display the 3D virtual world we have been using a graphics package called HOOPS, from Ithaca Software. The artificial reality environment we have set up contains actors and objects as found in our Lincoln Logs Factory of the Future project. The environment allows us to view and control the objects within the virtual world. All communication between the separate CLIPS expert systems is done through VEOS. A graphical renderer generates camera views on X-Windows devices; Head Mounted Devices are not required. This allows more people to make use of this technology. We are experimenting with different types of virtual vehicles to give the user a sense that he or she is actually moving around inside the factory looking ahead through windows and virtual monitors.

Calls to Florida Poison Control Centers about mercury: Trends over 2003-2013.

PubMed

Gribble, Matthew O; Deshpande, Aniruddha; Stephan, Wendy B; Hunter, Candis M; Weisman, Richard S

2017-11-01

The aim of this analysis was to contrast trends in exposure-report calls and informational queries (a measure of public interest) about mercury to the Florida Poison Control Centers over 2003-2013. Poison-control specialists coded calls to Florida Poison Control Centers by substance of concern, caller demographics, and whether the call pertained to an exposure event or was an informational query. For the present study, call records regarding mercury were de-identified and provided along with daily total number of calls for statistical analysis. We fit Poisson models using generalized estimating equations to summarize changes across years in counts of daily calls to Florida Poison Control Centers, adjusting for month. In a second stage of analysis, we further adjusted for the total number of calls each day. We also conducted analyses stratified by age of the exposed. There was an overall decrease over 2003-2013 in the number of total calls about mercury [Ratio per year: 0.89, 95% CI: (0.88, 0.90)], and calls about mercury exposure [Ratio per year: 0.84, 95% CI: (0.83, 0.85)], but the number of informational queries about mercury increased over this time [Ratio per year: 1.15 (95% CI: 1.12, 1.18)]. After adjusting for the number of calls of that type each day (e.g., call volume), the associations remained similar: a ratio of 0.88 (95% CI: 0.87, 0.89) per year for total calls, 0.85 (0.83, 0.86) for exposure-related calls, and 1.17 (1.14, 1.21) for informational queries. Although, the number of exposure-related calls decreased, informational queries increased over 2003-2013. This might suggest an increased public interest in mercury health risks despite a decrease in reported exposures over this time period. Copyright © 2017 Elsevier Inc. All rights reserved.

Bearer channel control protocol for the dynamic VB5.2 interface in ATM access networks

NASA Astrophysics Data System (ADS)

Fragoulopoulos, Stratos K.; Mavrommatis, K. I.; Venieris, Iakovos S.

1996-12-01

In the multi-vendor systems, a customer connected to an Access network (AN) must be capable of selecting a specific Service Node (SN) according to the services the SN provides. The multiplicity of technologically varying AN calls for the definition of a standard reference point between the AN and the SN widely known as the VB interface. Two versions are currently offered. The VB5.1 is simpler to implement but is not as flexible as the VB5.2, which supports switched connections. The VB5.2 functionality is closely coupled to the Broadband Bearer Channel Connection Protocol (B-BCCP). The B-BCCP is used for conveying the necessary information for dynamic resource allocation, traffic policing and routing in the AN as well as for information exchange concerning the status of the AN before a new call is established by the SN. By relying on such a protocol for the exchange of information instead of intercepting and interpreting signalling messages in the AN, the architecture of the AN is simplified because the functionality related to processing is not duplicated. In this paper a prominent B- BCCP candidate is defined, called the Service node Access network Interaction Protocol.

The FDA's Experience with Emerging Genomics Technologies-Past, Present, and Future.

PubMed

Xu, Joshua; Thakkar, Shraddha; Gong, Binsheng; Tong, Weida

2016-07-01

The rapid advancement of emerging genomics technologies and their application for assessing safety and efficacy of FDA-regulated products require a high standard of reliability and robustness supporting regulatory decision-making in the FDA. To facilitate the regulatory application, the FDA implemented a novel data submission program, Voluntary Genomics Data Submission (VGDS), and also to engage the stakeholders. As part of the endeavor, for the past 10 years, the FDA has led an international consortium of regulatory agencies, academia, pharmaceutical companies, and genomics platform providers, which was named MicroArray Quality Control Consortium (MAQC), to address issues such as reproducibility, precision, specificity/sensitivity, and data interpretation. Three projects have been completed so far assessing these genomics technologies: gene expression microarrays, whole genome genotyping arrays, and whole transcriptome sequencing (i.e., RNA-seq). The resultant studies provide the basic parameters for fit-for-purpose application of these new data streams in regulatory environments, and the solutions have been made available to the public through peer-reviewed publications. The latest MAQC project is also called the SEquencing Quality Control (SEQC) project focused on next-generation sequencing. Using reference samples with built-in controls, SEQC studies have demonstrated that relative gene expression can be measured accurately and reliably across laboratories and RNA-seq platforms. Besides prediction performance comparable to microarrays in clinical settings and safety assessments, RNA-seq is shown to have better sensitivity for low expression and reveal novel transcriptomic features. Future effort of MAQC will be focused on quality control of whole genome sequencing and targeted sequencing.

Theory-Guided Technology in Computer Science.

ERIC Educational Resources Information Center

Ben-Ari, Mordechai

2001-01-01

Examines the history of major achievements in computer science as portrayed by winners of the prestigious Turing award and identifies a possibly unique activity called Theory-Guided Technology (TGT). Researchers develop TGT by using theoretical results to create practical technology. Discusses reasons why TGT is practical in computer science and…

Solar Photovoltaic Technology Basics | NREL

Science.gov Websites

For more information about solar photovoltaic energy, visit the following resources: Solar PV Photovoltaic Technology Basics Solar Photovoltaic Technology Basics Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the

Technological Pedagogical Content Knowledge of Secondary Mathematics Teachers

ERIC Educational Resources Information Center

Handal, Boris; Campbell, Chris; Cavanagh, Michael; Petocz, Peter; Kelly, Nick

2013-01-01

The integration of technology, pedagogy, and content in the teaching of secondary mathematics was explored among 280 secondary mathematics teachers in the State of New South Wales, Australia. The study adopted the technological pedagogical content knowledge (TPCK) model through the administration of a 30-item instrument called TPCK-M. The…

Capability Building in Educational Technology for Teachers in China

ERIC Educational Resources Information Center

Jun, Han; Zhuzhu, Wang

2010-01-01

This paper gives a brief introduction to the project called Education Technology Capacity Building Plan for All Primary and Secondary Teachers now being implemented in China. Because information and communication technology skills training cannot match the demand of teachers' professional development, the Chinese Ministry of Education established…

Moving a Step Further from "Integrative CALL". What's to Come?

ERIC Educational Resources Information Center

Gimeno-Sanz, Ana

2016-01-01

This paper reflects upon the evolution of technology-enhanced language learning throughout the past two decades based on the author's own experience and how Information and Communications Technologies have played a prominent role on how language teaching pedagogies have evolved alongside the technologies themselves. Reference is made to the…

Educational Perspectives on Digital Communications Technologies

ERIC Educational Resources Information Center

Brett, Clare

2009-01-01

This article examines key issues in how new technologies are impacting upon how we teach, learn and collaborate, and uses an educational research project called GRAIL (Graduate Researcher's Academic Identity Online) under development to illustrate some fundamental issues in adopting new technologies. A significant challenge to the effective use of…

Fulldome Video: An Emerging Technology for Education

ERIC Educational Resources Information Center

Law, Linda E.

2006-01-01

This article talks about fulldome video, a new technology which has been adopted fairly extensively by the larger, well-funded planetariums. Fulldome video, also called immersive projection, can help teach subjects ranging from geology to history to chemistry. The rapidly advancing progress of projection technology has provided high-resolution…

Zebra finch mates use their forebrain song system in unlearned call communication.

PubMed

Ter Maat, Andries; Trost, Lisa; Sagunsky, Hannes; Seltmann, Susanne; Gahr, Manfred

2014-01-01

Unlearned calls are produced by all birds whereas learned songs are only found in three avian taxa, most notably in songbirds. The neural basis for song learning and production is formed by interconnected song nuclei: the song control system. In addition to song, zebra finches produce large numbers of soft, unlearned calls, among which "stack" calls are uttered frequently. To determine unequivocally the calls produced by each member of a group, we mounted miniature wireless microphones on each zebra finch. We find that group living paired males and females communicate using bilateral stack calling. To investigate the role of the song control system in call-based male female communication, we recorded the electrical activity in a premotor nucleus of the song control system in freely behaving male birds. The unique combination of acoustic monitoring together with wireless brain recording of individual zebra finches in groups shows that the neuronal activity of the song system correlates with the production of unlearned stack calls. The results suggest that the song system evolved from a brain circuit controlling simple unlearned calls to a system capable of producing acoustically rich, learned vocalizations.

Zebra Finch Mates Use Their Forebrain Song System in Unlearned Call Communication

PubMed Central

Ter Maat, Andries; Trost, Lisa; Sagunsky, Hannes; Seltmann, Susanne; Gahr, Manfred

2014-01-01

Unlearned calls are produced by all birds whereas learned songs are only found in three avian taxa, most notably in songbirds. The neural basis for song learning and production is formed by interconnected song nuclei: the song control system. In addition to song, zebra finches produce large numbers of soft, unlearned calls, among which “stack” calls are uttered frequently. To determine unequivocally the calls produced by each member of a group, we mounted miniature wireless microphones on each zebra finch. We find that group living paired males and females communicate using bilateral stack calling. To investigate the role of the song control system in call-based male female communication, we recorded the electrical activity in a premotor nucleus of the song control system in freely behaving male birds. The unique combination of acoustic monitoring together with wireless brain recording of individual zebra finches in groups shows that the neuronal activity of the song system correlates with the production of unlearned stack calls. The results suggest that the song system evolved from a brain circuit controlling simple unlearned calls to a system capable of producing acoustically rich, learned vocalizations. PMID:25313846

Descriptive epidemiology of indoor odor complaints at a large teaching institution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boswell, R.T.; DiBerardinis, L.; Ducatman, A.

1994-04-01

Investigation of indoor odor complaints consumes a substantial portion of the time and resources of many industrial hygiene offices, yet very little information has been published on the subject. We examined 3 years of data on indoor odor complaints at the Massachusetts Institute of Technology in Cambridge, Massachusetts in order to identify factors that may trigger complaints of odors. Plumbing and maintenance accounted for the majority of activities responsible for the identified sources (35% of calls), while research and teaching activities accounted for only 11 percent of calls. A larger number of calls were received during the winter months whenmore » windows are closed and school is in session. There was generally good correlation between the description of an odor by a complainant and the actual source. Offices/secretarial areas/office support rooms accounted for almost half of the calls, while laboratory facilities accounted for 19 percent of the calls. Despite the fact that the chemistry department was responsible for the most number of calls, the odor sources from these complaints were related primarily to plumbing (dried sink and floor drains) and not the chemicals used for research and teaching. Four types of abatement measures were used when odor sources could be identified: natural dissipation of the odor (23%), advice for prevention of future odors (11%), controlling an odor source (16%), and correction of the odor source (33%). We conclude that the majority of sources of indoor odors which trigger complaints are related to the maintenance of the physical plant, and that complaints are likely to be generated by unfamiliarity with certain odors. Recommendations are given to help reduce indoor odors and the time-consuming investigations into complaints from these odors. 10 refs., 4 figs.« less

An Industrial Technology Called Tribiology--the UK Experience and Its Implications

DTIC Science & Technology

1976-08-27

0 OF ONR LOFmlaN OF tNRL R-7-76 ,xl OFFICE Of N A Al INDUSTRIAL TECHNOLOGY CALLED TRIBOLOGY--DES E ARCH THE UK EXPERIENCE AND ITS IMPLICATIONS At...a number of studies on the thermal and elastic efects which predominate in the operation of large hydrodynamic bearings. These effects give rise to...Durham, 10 years after the Jost Report (from 30 " arch to I April 197b), the convention titled "Tribology 1976," devoted ,A *,J d, a1 .4 tiri to . ,i

EC86-33385-002

NASA Image and Video Library

1986-02-27

This photograph shows a modified General Dynamics AFTI/F-111A Aardvark in flight with supercritical mission adaptive wings (MAW) installed. With the phasing out of the TACT program came a renewed effort by the Air Force Flight Dynamics Laboratory to extend supercritical wing technology to a higher level of performance. In the early 1980s the supercritical wing on the F-111A aircraft was replaced with a wing built by Boeing Aircraft Company System called a “mission adaptive wing” (MAW), and a joint NASA and Air Force program called Advanced Fighter Technology Integration (AFTI) was born.

Interactive Classification Technology

NASA Technical Reports Server (NTRS)

deBessonet, Cary

2000-01-01

The investigators upgraded a knowledge representation language called SL (Symbolic Language) and an automated reasoning system called SMS (Symbolic Manipulation System) to enable the more effective use of the technologies in automated reasoning and interactive classification systems. The overall goals of the project were: 1) the enhancement of the representation language SL to accommodate a wider range of meaning; 2) the development of a default inference scheme to operate over SL notation as it is encoded; and 3) the development of an interpreter for SL that would handle representations of some basic cognitive acts and perspectives.

Adapting Wireless Technology to Lighting Control and Environmental Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Teasdale; Francis Rubinstein; David S. Watson

Although advanced lighting control systems offer significant energy savings, the high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor,more » and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output, in addition to 0-24 Volt and 0-10 Volt inputs. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multisensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including open and closed-loop daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 20% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years. At 30% market penetration saturation, a cumulative 695 Billion kWh of energy could be saved through 2025, a cost savings of $52 Billion.« less

In vitro spatially organizing the differentiation in individual multicellular stem cell aggregates.

PubMed

Qi, Hao; Huang, Guoyou; Han, Yu Long; Lin, Wang; Li, Xiujun; Wang, Shuqi; Lu, Tian Jian; Xu, Feng

2016-01-01

With significant potential as a robust source to produce specific somatic cells for regenerative medicine, stem cells have attracted increasing attention from both academia and government. In vivo, stem cell differentiation is a process under complicated regulations to precisely build tissue with unique spatial structures. Since multicellular spheroidal aggregates of stem cells, commonly called as embryoid bodies (EBs), are considered to be capable of recapitulating the events in early stage of embryonic development, a variety of methods have been developed to form EBs in vitro for studying differentiation of embryonic stem cells. The regulation of stem cell differentiation is crucial in directing stem cells to build tissue with the correct spatial architecture for specific functions. However, stem cells within the three-dimensional multicellular aggregates undergo differentiation in a less unpredictable and spatially controlled manner in vitro than in vivo. Recently, various microengineering technologies have been developed to manipulate stem cells in vitro in a spatially controlled manner. Herein, we take the spotlight on these technologies and researches that bring us the new potential for manipulation of stem cells for specific purposes.

The impact of hybrid and electric powertrains on vehicle dynamics, control systems and energy regeneration

NASA Astrophysics Data System (ADS)

Crolla, David A.; Cao, Dongpu

2012-01-01

The background to the development of so-called green or low-carbon vehicles continues to be relentlessly reviewed throughout the literature. Research and development (R&D) on novel powertrains - often based on electric or hybrid technology - has been dominating automotive engineering around the world for the first two decades of the twenty-first century. Inevitably, most of the R&D has focused on powertrain technology and energy management challenges. However, as new powertrains have started to become commercially available, their effects on other aspects of vehicle performance have become increasingly important. This article focuses on the review of the integration of new electrified powertrains with the vehicle dynamics and control systems. The integration effects can be discussed in terms of three generic aspects of vehicle motions, namely roll-plane, pitch-plane and yaw-plane, which however are strongly coupled. The topic on regenerative suspension is further discussed. It quickly becomes clear that this integration poses some interesting future engineering challenges to maintain currently accepted levels of ride, handling and stability performance.

More features, greater connectivity.

PubMed

Hunt, Sarah

2015-09-01

Changes in our political infrastructure, the continuing frailties of our economy, and a stark growth in population, have greatly impacted upon the perceived stability of the NHS. Healthcare teams have had to adapt to these changes, and so too have the technologies upon which they rely to deliver first-class patient care. Here Sarah Hunt, marketing co-ordinator at Aid Call, assesses how the changing healthcare environment has affected one of its fundamental technologies - the nurse call system, argues the case for wireless such systems in terms of what the company claims is greater adaptability to changing needs, and considers the ever-wider range of features and functions available from today's nurse call equipment, particularly via connectivity with both mobile devices, and ancillaries ranging from enuresis sensors to staff attack alert 'badges'.

Creativity and Collaboration: Using CALL to Facilitate International Collaboration for Online Journalism at a Model United Nations Event

ERIC Educational Resources Information Center

Sheehan, Mark D.; Thorpe, Todd; Dunn, Robert

2015-01-01

Much has been gained over the years in various educational fields that have taken advantage of CALL. In many cases, CALL has facilitated learning and provided teachers and students access to materials and tools that would have remained out of reach were it not for technology. Nonetheless, there are still cases where a lack of funding or access to…

78 FR 44622 - Agency Information Collection; Activity Under OMB Review; Confidential Close Call Reporting System

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-24

... (OMB) for approval for renewal of information collection supporting a multi-year research study that... DEPARTMENT OF TRANSPORTATION Research and Innovative Technology Administration Agency Information Collection; Activity Under OMB Review; Confidential Close Call Reporting System AGENCY: Research & Innovative...

Application of a smartphone nurse call system for nursing care.

PubMed

Chuang, Shu-Ting; Liu, Yi-Fang; Fu, Zi-Xuan; Liu, Kuang-Chung; Chien, Sou-Hsin; Lin, Chin-Lon; Lin, Pi-Yu

2015-02-01

Traditionally, a patient presses the nurse call button and alerts the central nursing station. This system cannot reach the primary care nurse directly. The aim of this study was to apply a new smartphone system through the cloud system and information technology that linked a smartphone and a mobile nursing station for nursing care service. A smartphone and mobile nursing station were integrated into a smartphone nurse call system through the cloud and information technology for better nursing care. Waiting time for a patient to contact the most responsible nurse was reduced from 3.8 min to 6 s. The average time for pharmacists to locate the nurse for medication problem was reduced from 4.2 min to 1.8 min by the new system. After implementation of the smartphone nurse call system, patients received a more rapid response. This improved patients' satisfaction and reduced the number of complaints about longer waiting time due to the shortage of nurses.

Technology transfer: the key to fusion commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burnett, S.C.

1981-01-01

The paper brings to light some of the reasons why technology transfer is difficult in fusion, examines some of the impediments to the process, and finally looks at a successful example of technology transfer. The paper considers some subjective features of fusion - one might call them the sociology of fusion - that are none the less real and that serve as impediments to technology transfer.

Call of the North. NECC '96: Proceedings of the Annual National Educational Computing Conference (17th, Minneapolis, Minnesota, June 11-13, 1996).

ERIC Educational Resources Information Center

Ingham, Donella, Ed.

These conference proceedings address the current trends, practices, and research in the field of educational technology. Papers and project descriptions are included on the following topics: the use of technology to encourage learning of special needs students; distance education; integrating technology into the curriculum; technology in…

DIVWAG Model Documentation. Volume II. Programmer/Analyst Manual. Part 3. Chapter 9 Through 12.

DTIC Science & Technology

1976-07-01

entered through a routine, NAM2, that calls the segment controlling routine NBARAS. (4) Segment 3, controlled by the routine NFIRE , simulates round...nuclear fire, NAM calls in sequence the routines NFIRE (segment 3), ASUNIT (segment 2), SASSMT (segment 4), and NFIRE (segment 3). These calls simulate...this is a call to NFIRE (ISEG equals one or two), control goes to block L2. (2) Block 2. If this is to assess a unit passing through a nuclear barrier

Pyrogen tests of infusions, blood anticoagulant solutions, plastic materials and rubber products.

PubMed

Pintér, J; Zsdánszky, C; Györffy, G

1977-01-01

The methods of the pyrogen test in rabbit as adopted by the authors are presented. The test includes positive and negative controls. The conditions of using the same rabbits on two consecutive days are discussed. Methods of sampling of sterile infusions and the preparation for pyrogen test of anticoagulant solutions containing citrate, phosphate and/or edetate ions are presented. The necessity of pyrogen control of distilled water is stressed. Attention is called on the importance of testing for pyrogenicity of the plastic materials and the rubber-wares to be applied during the production of anticoagulant solutions and infusions. A pyrogen test highly sensitive for detecting traces of detergent is applied for washed glassware. It is emphasized that sensitive pyrogen tests are indispensable not only when new derivatives are being introduced, but also during routine control, because occasional changes in the manufacturer's technology may sometimes be demonstrable in this way.

The drive for Aircraft Energy Efficiency

NASA Technical Reports Server (NTRS)

James, R. L., Jr.; Maddalon, D. V.

1984-01-01

NASA's Aircraft Energy Efficiency (ACEE) program, which began in 1976, has mounted a development effort in four major transport aircraft technology fields: laminar flow systems, advanced aerodynamics, flight controls, and composite structures. ACEE has explored two basic methods for achieving drag-reducing boundary layer laminarization: the use of suction through the wing structure (via slots or perforations) to remove boundary layer turbulence, and the encouragement of natural laminar flow maintenance through refined design practices. Wind tunnel tests have been conducted for wide bodied aircraft equipped with high aspect ratio supercritical wings and winglets. Maneuver load control and pitch-active stability augmentation control systems reduce fuel consumption by reducing the drag associated with high aircraft stability margins. Composite structures yield lighter airframes that in turn call for smaller wing and empennage areas, reducing induced drag for a given payload. In combination, all four areas of development are expected to yield a fuel consumption reduction of 40 percent.

Designing Security-Hardened Microkernels For Field Devices

NASA Astrophysics Data System (ADS)

Hieb, Jeffrey; Graham, James

Distributed control systems (DCSs) play an essential role in the operation of critical infrastructures. Perimeter field devices are important DCS components that measure physical process parameters and perform control actions. Modern field devices are vulnerable to cyber attacks due to their increased adoption of commodity technologies and that fact that control networks are no longer isolated. This paper describes an approach for creating security-hardened field devices using operating system microkernels that isolate vital field device operations from untrusted network-accessible applications. The approach, which is influenced by the MILS and Nizza architectures, is implemented in a prototype field device. Whereas, previous microkernel-based implementations have been plagued by poor inter-process communication (IPC) performance, the prototype exhibits an average IPC overhead for protected device calls of 64.59 μs. The overall performance of field devices is influenced by several factors; nevertheless, the observed IPC overhead is low enough to encourage the continued development of the prototype.

Hearing Loss in Children: Treatment and Intervention Services

MedlinePlus

... coordinator to find available services in your state. Technology Many people who are deaf or hard-of- ... of-hearing person has is called “residual hearing”. Technology does not “cure” hearing loss, but may help ...

Saving Space and Time: The Tractor That Einstein Built

NASA Technical Reports Server (NTRS)

2006-01-01

In 1984, NASA initiated the Gravity Probe B (GP-B) program to test two unverified predictions of Albert Einstein s theory of general relativity, hypotheses about the ways space, time, light, and gravity relate to each other. To test these predictions, the Space Agency and researchers at Stanford University developed an experiment that would check, with extreme precision, tiny changes in the spin direction of four gyroscopes contained in an Earth satellite orbiting at a 400-mile altitude directly over the Earth s poles. When the program first began, the researchers assessed using Global Positioning System (GPS) technology to control the attitude of the GP-B spacecraft accurately. At that time, the best GPS receivers could only provide accuracy to nearly 1 meter, but the GP-B spacecraft required a system 100 times more accurate. To address this concern, researchers at Stanford designed high-performance, attitude-determining hardware that used GPS signals, perfecting a high-precision form of GPS called Carrier-Phase Differential GPS that could provide continuous real-time position, velocity, time, and attitude sensor information for all axes of a vehicle. The researchers came to the realization that controlling the GP-B spacecraft with this new system was essentially no different than controlling an airplane. Their thinking took a new direction: If this technology proved successful, the airlines and the Federal Aviation Administration (FAA) were ready commercial markets. They set out to test the new technology, the "Integrity Beacon Landing System," using it to automatically land a commercial Boeing 737 over 100 times successfully through Real-Time Kinematic (RTK) GPS technology. The thinking of the researchers shifted again, from automatically landing aircraft, to automating precision farming and construction equipment.

Low-Noise Potential of Advanced Fan Stage Stator Vane Designs Verified in NASA Lewis Wind Tunnel Test

NASA Technical Reports Server (NTRS)

Hughes, Christopher E.

1999-01-01

With the advent of new, more stringent noise regulations in the next century, aircraft engine manufacturers are investigating new technologies to make the current generation of aircraft engines as well as the next generation of advanced engines quieter without sacrificing operating performance. A current NASA initiative called the Advanced Subsonic Technology (AST) Program has set as a goal a 6-EPNdB (effective perceived noise) reduction in aircraft engine noise relative to 1992 technology levels by the year 2000. As part of this noise program, and in cooperation with the Allison Engine Company, an advanced, low-noise, high-bypass-ratio fan stage design and several advanced technology stator vane designs were recently tested in NASA Lewis Research Center's 9- by 15-Foot Low-Speed Wind Tunnel (an anechoic facility). The project was called the NASA/Allison Low Noise Fan.

An optimized resistor pattern for temperature gradient control in microfluidics

NASA Astrophysics Data System (ADS)

Selva, Bertrand; Marchalot, Julien; Jullien, Marie-Caroline

2009-06-01

In this paper, we demonstrate the possibility of generating high-temperature gradients with a linear temperature profile when heating is provided in situ. Thanks to improved optimization algorithms, the shape of resistors, which constitute the heating source, is optimized by applying the genetic algorithm NSGA-II (acronym for the non-dominated sorting genetic algorithm) (Deb et al 2002 IEEE Trans. Evol. Comput. 6 2). Experimental validation of the linear temperature profile within the cavity is carried out using a thermally sensitive fluorophore, called Rhodamine B (Ross et al 2001 Anal. Chem. 73 4117-23, Erickson et al 2003 Lab Chip 3 141-9). The high level of agreement obtained between experimental and numerical results serves to validate the accuracy of this method for generating highly controlled temperature profiles. In the field of actuation, such a device is of potential interest since it allows for controlling bubbles or droplets moving by means of thermocapillary effects (Baroud et al 2007 Phys. Rev. E 75 046302). Digital microfluidics is a critical area in the field of microfluidics (Dreyfus et al 2003 Phys. Rev. Lett. 90 14) as well as in the so-called lab-on-a-chip technology. Through an example, the large application potential of such a technique is demonstrated, which entails handling a single bubble driven along a cavity using simple and tunable embedded resistors.

Calling it what it is. Thesauri in the Flanders Heritage Agency: History, Importance, Use and Technological Advances

NASA Astrophysics Data System (ADS)

Mortier, S.; Van Daele, K.; Meganck, L.

2017-08-01

Heritage organizations in Flanders started using thesauri fairly recently compared to other countries. This paper starts with examining the historical use of thesauri and controlled vocabularies in computer systems by the Flemish Government dealing with immovable cultural heritage. Their evolution from simple, flat, controlled lists to actual thesauri with scope notes, hierarchical and equivalence relations and links to other thesauri will be discussed. An explanation will be provided for the evolution in our approach to controlled vocabularies, and how they radically changed querying and the way data is indexed in our systems. Technical challenges inherent to complex thesauri and how to overcome them will be outlined. These issues being solved, thesauri have become an essential feature of the Flanders Heritage inventory management system. The number of vocabularies rose over the years and became an essential tool for integrating heritage from different disciplines. As a final improvement, thesauri went from being a core part of one application (the inventory management system) to forming an essential part of a new general resource oriented system architecture for Flanders Heritage influenced by Linked Data. For this purpose, a generic SKOS based editor was created. Due to the SKOS model being generic enough to be used outside of Flanders Heritage, the decision was made early on to develop this editor as an open source project called Atramhasis and share it with the larger heritage world.

Development of in-situ control diagnostics for application of epitaxial superconductor and buffer layers

DOE Office of Scientific and Technical Information (OSTI.GOV)

B.C. Winkleman; T.V. Giel; Jason Cunningham

1999-07-30

The recent achievements of critical currents in excess of 1 x 10{sup 6} amp/cm{sup 2} at 77 K in YBCO deposited over suitably textured buffer/substrate composites have stimulated interest in the potential fabrication of these coated conductors as wire. Numerous approaches and manufacturing schemes for producing coated conductor wire are currently being developed. Recently, under the US DOE's sponsorship, the University of Tennessee Space Institute performed an extensive evaluation of leading coated conductor processing options. In general, it is their feeling that the science and chemistry that are being developed in the coated conductor wire program now need proper engineeringmore » evaluation to define the most viable options for a commercial fabrication process. All fabrication processes will need process control measurements. This report provides a specific review of the needs and available technologies for process control for many of the coated conductor processing options. This report also addresses generic process monitoring areas in which additional research and development is needed. The concentration is on the two different approaches for obtaining the textured substrates that have been identified as viable candidates. These are the Los Alamos National Laboratory's ion-beam assisted deposition, called IBAD, to obtain a highly textured yttria-stabilized zirconia (YSZ) buffer on nickel alloy strips, and Oak Ridge National Laboratory's rolling assisted, bi-axially textured substrate option called RABiTS{trademark}.« less

Solving the nanostructure problem: exemplified on metallic alloy nanoparticles

NASA Astrophysics Data System (ADS)

Petkov, Valeri; Prasai, Binay; Ren, Yang; Shan, Shiyao; Luo, Jin; Joseph, Pharrah; Zhong, Chuan-Jian

2014-08-01

With current technology moving rapidly toward smaller scales nanometer-size materials, hereafter called nanometer-size particles (NPs), are being produced in increasing numbers and explored for various useful applications ranging from photonics and catalysis to detoxification of wastewater and cancer therapy. Nature also is a prolific producer of useful NPs. Evidence can be found in ores on the ocean floor, minerals and soils on land and in the human body that, when water is excluded, is mostly made of proteins that are 6-10 nm in size and globular in shape. Precise knowledge of the 3D atomic-scale structure, that is how atoms are arranged in space, is a crucial prerequisite for understanding and so gaining more control over the properties of any material, including NPs. In the case of bulk materials such knowledge is fairly easy to obtain by Bragg diffraction experiments. Determining the 3D atomic-scale structure of NPs is, however, still problematic spelling trouble for science and technology at the nanoscale. Here we explore this so-called ``nanostructure problem'' from a practical point of view arguing that it can be solved when its technical, that is the inapplicability of Bragg diffraction to NPs, and fundamental, that is the incompatibility of traditional crystallography with NPs, aspects are both addressed properly. As evidence we present a successful and broadly applicable, 6-step approach to determining the 3D atomic-scale structure of NPs based on a suitable combination of a few experimental and computational techniques. This approach is exemplified on 5 nm sized PdxNi100-x particles (x = 26, 56 and 88) explored for catalytic applications. Furthermore, we show how once an NP atomic structure is determined precisely, a strategy for improving NP structure-dependent properties of particular interest to science and technology can be designed rationally and not subjectively as frequently done now.With current technology moving rapidly toward smaller scales nanometer-size materials, hereafter called nanometer-size particles (NPs), are being produced in increasing numbers and explored for various useful applications ranging from photonics and catalysis to detoxification of wastewater and cancer therapy. Nature also is a prolific producer of useful NPs. Evidence can be found in ores on the ocean floor, minerals and soils on land and in the human body that, when water is excluded, is mostly made of proteins that are 6-10 nm in size and globular in shape. Precise knowledge of the 3D atomic-scale structure, that is how atoms are arranged in space, is a crucial prerequisite for understanding and so gaining more control over the properties of any material, including NPs. In the case of bulk materials such knowledge is fairly easy to obtain by Bragg diffraction experiments. Determining the 3D atomic-scale structure of NPs is, however, still problematic spelling trouble for science and technology at the nanoscale. Here we explore this so-called ``nanostructure problem'' from a practical point of view arguing that it can be solved when its technical, that is the inapplicability of Bragg diffraction to NPs, and fundamental, that is the incompatibility of traditional crystallography with NPs, aspects are both addressed properly. As evidence we present a successful and broadly applicable, 6-step approach to determining the 3D atomic-scale structure of NPs based on a suitable combination of a few experimental and computational techniques. This approach is exemplified on 5 nm sized PdxNi100-x particles (x = 26, 56 and 88) explored for catalytic applications. Furthermore, we show how once an NP atomic structure is determined precisely, a strategy for improving NP structure-dependent properties of particular interest to science and technology can be designed rationally and not subjectively as frequently done now. Electronic supplementary information (ESI) available: XRD patterns, TEM and 3D structure modeling results. See DOI: 10.1039/c4nr01633e

Wringing out the costs. Preferred provider organizations are using technology to get the job done.

PubMed

McCormack, J

1999-04-01

The thin margins in the PPO business mean that these managed care plans must make sure they are deploying information technology in ways that improve efficiency. Information technology professionals at PPOs also are being called upon to develop initiatives that will give their organizations a competitive edge.

Dalcroze Meets Technology: Integrating Music, Movement and Visuals with the Music Paint Machine

ERIC Educational Resources Information Center

Nijs, Luc

2018-01-01

New interactive music educational technologies are often seen as a 'force of change', introducing new approaches that address the shortcomings (e.g. score-based, teacher-centred and disembodied) of the so-called traditional teaching approaches. And yet, despite the growing belief in their educational potential, these new technologies have been…

Short Cuts and Extended Techniques: Rethinking Relations between Technology and Educational Theory

ERIC Educational Resources Information Center

Thumlert, Kurt; de Castell, Suzanne; Jenson, Jennifer

2015-01-01

Building upon a recent call to renew actor-network theory (ANT) for educational research, this article reconsiders relations between technology and educational theory. Taking cues from actor-network theorists, this discussion considers the technologically-mediated networks in which learning actors are situated, acted upon, and acting, and traces…

An Emancipation Framework for Technology Education Teachers: An Action Research Study

ERIC Educational Resources Information Center

Mapotse, Tomé Awshar

2015-01-01

This article reports on how action research (AR) was influential in designing an educational instrument to contribute to emancipating teachers with no formal training to teach technology as a subject in secondary schools. The subject technology is referred to using different names in different countries. Some call it "science and…

Mobile Assisted Language Learning: Review of the Recent Applications of Emerging Mobile Technologies

ERIC Educational Resources Information Center

Yang, Jaeseok

2013-01-01

As mobile computing technologies have been more powerful and inclusive in people's daily life, the issue of mobile assisted language learning (MALL) has also been widely explored in CALL research. Many researches on MALL consider the emerging mobile technologies have considerable potentials for the effective language learning. This review study…

Using Data to Individualize a Multicomponent, Technology-Based Self-Monitoring Intervention

ERIC Educational Resources Information Center

Bruhn, Allison Leigh; Vogelgesang, Kari; Fernando, Josephine; Lugo, Wilbeth

2016-01-01

Technology in schools is abundant as is the call for evidence-based interventions for students who need additional support to be successful. One promising use of technology is for self-monitoring interventions aimed at improving classroom behavior. In this study, two middle school students with disabilities used a multicomponent, self-monitoring…

10 Trends to Watch in Campus Technology

ERIC Educational Resources Information Center

Martin, James; Samels, James E.

2007-01-01

College and university presidents are increasingly called upon to make informed choices about technology. The rapidly shifting landscape makes it tough to keep up with change and innovation, let alone stay ahead of the curve. In this article, the authors discuss 10 trends to watch in campus technology. These trends are the following: (1) increased…

Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

ERIC Educational Resources Information Center

OECD Publishing, 2016

2016-01-01

OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

Using Information and Communication Technologies in School Improvement

ERIC Educational Resources Information Center

Tosun, Nilgun; Baris, M. Fatih

2011-01-01

Advances in information and communication technologies, shortly called as ICT, require educators to present a more efficient and modern education by using these technologies. Therefore; the role of ICT in the development of education has been a popular research subject nowadays. Even not only education content but it has started to be dwelt on how…

Building the Technology Toolkit of Marketing Students: The Emerging Technologies in Marketing Initiative

ERIC Educational Resources Information Center

Miller, Fred L.; Mangold, W. Glynn; Roach, Joy; Holmes, Terry

2013-01-01

New information technologies are transforming marketing practice, leading to calls for marketing academics to focus their research and teaching more tightly on areas relevant to practitioners. Developments in e-commerce, business geographic information systems (GIS), and social media offer powerful marketing tools to nontechnical users. This paper…

Teachers as Learners: What Makes Technology-Focused Professional Development Effective?

ERIC Educational Resources Information Center

Curwood, Jen Scott

2011-01-01

Prompted by calls for research on technology-focused professional development, this article investigates how learning communities influence secondary English teachers' use of digital tools. Findings from this year-long study in the United States indicate that the ways in which technology is integrated within the English curriculum are still very…

Professional Learning Community (PLC): Technology Integration at a Title I Elementary School

ERIC Educational Resources Information Center

Cheng, Pamela L.

2017-01-01

Calls for educational technology integration over more than thirty years have taken on new urgency in an era of computerized assessments for accountability. As Internet Communication Technology (ICT) becomes more widely available, the digital divide is evolving into a digital use divide, characterized by differences between students' productive…

Radial Flow Fludized Filter Finds Niche as a Pretreatment System for Surface Water in Small Communities

EPA Science Inventory

An emerging technology called radial flow fluidized filter (R3f) has been developed as a low cost simplistic filtration technology for small communities of less than 10,000 people. Fouling is a major impediment to the sustainability of membrane technology particularly for small ...

Project Probase: Engaging Technology for 11th and 12th Grade Students

ERIC Educational Resources Information Center

Wyse-Fisher, Dustin J.; Daugherty, Michael K.; Satchwell, Richard E.; Custer, Rodney L.

2005-01-01

Journal manuscripts and national reports published during the last 20 years (Bensen, 1993; DeVries, 1996; AAAS, 1989; National Academy of Engineering, 2002; ITEA, 1996; Zuga, 1989) presented a defensible rationale for the technology education profession and focused on the delivery of technological literacy for the nation's youth. This call for…

77 FR 20014 - President's Council of Advisors on Science and Technology (PCAST): Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-03

... DEPARTMENT OF ENERGY President's Council of Advisors on Science and Technology (PCAST): Correction... call for the President's Council of Advisors on Science and Technology (PCAST). The notice is being corrected to change the time and to add an additional purpose. Correction In the Federal Register of March...

The Foundations of Technology Course: Teachers Like It!

ERIC Educational Resources Information Center

Moye, Johnny J.

2009-01-01

Over the past several decades there has been a call to raise student technological literacy. To take such an abstract concept and produce a program that will increase student science, technology, engineering, and mathematics (STEM) literacy was not an easy task. However, it was accomplished. During the past two years many United States school…

Impact of Science-Technology Learning Environment Characteristics on Learning Outcomes: Pupils' Perceptions and Gender Differences

ERIC Educational Resources Information Center

Doppelt, Yaron

2004-01-01

Science and technology are connected to each other and are mutually inspiring. The science-technology curriculum for junior-high school in Israel suggests that teachers integrate these subjects. In addition, this curriculum calls for infusing thinking competencies into the learning subjects and for implementing alternatives in assessment methods…

Implementing neural nets with programmable logic

NASA Technical Reports Server (NTRS)

Vidal, Jacques J.

1988-01-01

Networks of Boolean programmable logic modules are presented as one purely digital class of artificial neural nets. The approach contrasts with the continuous analog framework usually suggested. Programmable logic networks are capable of handling many neural-net applications. They avoid some of the limitations of threshold logic networks and present distinct opportunities. The network nodes are called dynamically programmable logic modules. They can be implemented with digitally controlled demultiplexers. Each node performs a Boolean function of its inputs which can be dynamically assigned. The overall network is therefore a combinational circuit and its outputs are Boolean global functions of the network's input variables. The approach offers definite advantages for VLSI implementation, namely, a regular architecture with limited connectivity, simplicity of the control machinery, natural modularity, and the support of a mature technology.

A force-controllable macro-micro manipulator and its application to medical robots

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Uecker, Darrin R.; Wang, Yulun

1994-01-01

This paper describes an 8-degrees-of-freedom macro-micro robot. This robot is capable of performing tasks that require accurate force control, such as polishing, finishing, grinding, deburring, and cleaning. The design of the macro-micro mechanism, the control algorithms, and the hardware/software implementation of the algorithms are described in this paper. Initial experimental results are reported. In addition, this paper includes a discussion of medical surgery and the role that force control may play. We introduce a new class of robotic systems collectively called Robotic Enhancement Technology (RET). RET systems introduce the combination of robotic manipulation with human control to perform manipulation tasks beyond the individual capability of either human or machine. The RET class of robotic systems offers new challenges in mechanism design, control-law development, and man/machine interface design. We believe force-controllable mechanisms such as the macro-micro structure we have developed are a necessary part of RET. Work in progress in the area of RET systems and their application to minimally invasive surgery is presented, along with future research directions.

New Technology for Oil/Water Emulsion Treatment: Phases I and II

DTIC Science & Technology

1998-05-15

m.(Aŕ) Emulsions have long been of practical interest because of their extensive everyday applications. Emulsions are used in foods ( milk and...separating cream from milk . Valve-discharge centrifuges periodically discharge accumulated solids. Split-bowl centrifuges have a bowl that allows...fresh air. Call a physician. RVF CONTACT: Flush with water for 15 minutes. Call a physician. Wash thSroSghly with soap and rinse with water. Call

Conventional armed forces in Europe: Technology scenario development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houser, G.M.

1990-07-01

In January 1986, the Soviet Union's Mikhail Gorbachev proposed elimination of all nuclear weapons by the year 2000. In April of that year, Mr. Gorbachev proposed substantial reductions of conventional weapons in Europe, from the Atlantic Ocean to the Ural Mountains, including reductions in operational-tactical nuclear weapons. In May 1986, the North Atlantic Treaty Organization (NATO) responded with the Brussels Declaration on Conventional Arms Control,'' which indicated readiness to open East/West discussions on establishing a mandate for negotiating conventional arms control throughout Europe. The Group of 23,'' which met in Vienna beginning in February 1987, concluded the meeting in Januarymore » 1989 with a mandate for the Conventional Armed Forced in Europe (CFE) negotiations. On 6 March 1989, CFE talks began, and these talks have continued through six rounds (as of April 1990). Although US President George Bush, on 30 May 1989, called for agreement within six months to a year, and the Malta meeting of December 1989 called for completion of a CFE agreement by the end of 1990, much remains to be negotiated. This report provides three types of information. First, treaty provisions brought to the table by both sides are compared. Second, on the basis of these provisions, problem areas for each of the provision elements are postulated and possible scenarios for resolving these problem areas are developed. Third, the scenarios are used as requirements for tasks assigned program elements for possible US implementation of a CFE treaty. As progress is achieved during the negotiations, this report could be updated, as necessary, in each of the areas to provide a continuing systematic basis for program implementation and technology development. 8 refs.« less

Debunking Technical Competency as the Sole Source of Innovation

DTIC Science & Technology

2015-01-01

51 Sustaining vs. Disruptive Technologies Advocates for increasing the number of STEM-credentialed graduates often link U.S. innovation to economic...successful companies are led by talented managers who focus on developing sustaining technologies rather than on what he calls disruptive technologies . Sustaining...simpler, smaller, and frequently more convenient to use.53 Disruptive technologies will eventually overtake or match the performance of the

Extending green technology innovations to enable greener fabs

NASA Astrophysics Data System (ADS)

Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

2015-03-01

Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

Education, Cyberspace, and Change [Serial Article Online].

ERIC Educational Resources Information Center

Lemke, J. L.

1993-01-01

This article was originally written on the internet in Australia to provide a starting point for discussions of new perspectives on education made possible by advanced technologies. Ecosocial changes in the practices and institutions called education are discussed in the context of changes in the practices and institutions called information…

Integrating Collaborative and Decentralized Models to Support Ubiquitous Learning

ERIC Educational Resources Information Center

Barbosa, Jorge Luis Victória; Barbosa, Débora Nice Ferrari; Rigo, Sandro José; de Oliveira, Jezer Machado; Rabello, Solon Andrade, Jr.

2014-01-01

The application of ubiquitous technologies in the improvement of education strategies is called Ubiquitous Learning. This article proposes the integration between two models dedicated to support ubiquitous learning environments, called Global and CoolEdu. CoolEdu is a generic collaboration model for decentralized environments. Global is an…

77 FR 32639 - HIT Standards Committee and HIT Policy Committee; Call for Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... with the implementation of the Federal Health IT Strategic Plan, and in accordance with policies... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee and HIT Policy Committee; Call for... Health Information Technology Policy Committee (HITPC). Name of Committees: HIT Standards Committee and...

Prospective Technology Assessment of Synthetic Biology: Fundamental and Propaedeutic Reflections in Order to Enable an Early Assessment.

PubMed

Schmidt, Jan Cornelius

2016-08-01

Synthetic biology is regarded as one of the key technosciences of the future. The goal of this paper is to present some fundamental considerations to enable procedures of a technology assessment (TA) of synthetic biology. To accomplish such an early "upstream" assessment of a not yet fully developed technology, a special type of TA will be considered: Prospective TA (ProTA). At the center of ProTA are the analysis and the framing of "synthetic biology," including a characterization and assessment of the technological core. The thesis is that if there is any differentia specifica giving substance to the umbrella term "synthetic biology," it is the idea of harnessing self-organization for engineering purposes. To underline that we are likely experiencing an epochal break in the ontology of technoscientific systems, this new type of technology is called "late-modern technology." -I start this paper by analyzing the three most common visions of synthetic biology. Then I argue that one particular vision deserves more attention because it underlies the others: the vision of self-organization. I discuss the inherent limits of this new type of late-modern technology in the attempt to control and monitor possible risk issues. I refer to Hans Jonas' ethics and his early anticipation of the risks of a novel type of technology. I end by drawing conclusions for the approach of ProTA towards an early societal shaping of synthetic biology.

Two innovative healthcare technologies at the intersection of serious games, alternative realities, and play therapy.

PubMed

Brahnam, Sheryl; Brooks, Anthony L

2014-01-01

Using game technologies and digital media for improving physical and mental health and for the therapeutic benefit and well-being of a wide range of people is an area of study that is rapidly expanding. Much research in this emerging field is centered at the intersection of serious games, alternative realities, and play therapy. In this paper the authors describe their transdisciplinary work at this intersection: i) an integrative system of psychotherapy technologies called MyPsySpace currently being prototyped in Second Life with the aim of offering new and virtual translations of traditional expressive therapies (virtual sandplay, virtual drama therapy, digital expressive therapy, and virtual safe spaces) and ii) a mature body of research entitled SoundScapes that is exploring the use of interactive video games and abstract creative expression (making music, digital painting, and robotic device control) as a supplement to traditional physical rehabilitation intervention. Aside from introducing our work to a broader audience, our goal is to encourage peers to investigate ideas that reach across disciplines-to both risk and reap the benefits of combining technologies, theories, and methods stemming from multiple disciplines.

Design of a SIP device cooperation system on OSGi service platforms

NASA Astrophysics Data System (ADS)

Takayama, Youji; Koita, Takahiro; Sato, Kenya

2007-12-01

Home networks feature such various technologies as protocols, specifications, and middleware, including HTTP, UPnP, and Jini. A service platform is required to handle such technologies to enable them to cooperate with different devices. The OSGi service platform, which meets the requirements based on service-oriented architecture, is designed and standardized by OSGi Alliance and consists of two parts: one OSGi Framework and bundles. On the OSGi service platform, APIs are defined as services that can handle these technologies and are implemented in the bundle. By using the OSGi Framework with bundles, various technologies can cooperate with each other. On the other hand, in IP networks, Session Initiation Protocol (SIP) is often used in device cooperation services to resolve an IP address, control a session between two or more devices, and easily exchange the statuses of devices. However, since many existing devices do not correspond to SIP, it cannot be used for device cooperation services. A device that does not correspond to SIP is called an unSIP device. This paper proposes and implements a prototype system that enables unSIP devices to correspond to SIP. For unSIP devices, the proposed system provides device cooperation services with SIP.

Improving Childhood Obesity Treatment Using New Technologies: The ETIOBE System

PubMed Central

Baños, Rosa. M; Cebolla, Ausias; Botella, Cristina; García-Palacios, Azucena; Oliver, Elia; Zaragoza, Irene; Alcaniz, Mariano

2011-01-01

Childhood obesity is an increasing public health problem in western culture. Sedentary lifestyles and an “obesogenic environment” are the main influences on children leading to an increase in obesity. The objective of this paper is to describe an e-health platform for the treatment and prevention of childhood obesity called ETIOBE. This e-health platform is an e-therapy system for the treatment of obesity, aimed at improving treatment adherence and promoting the mechanisms of self-control in patients, to obtain weight loss maintenance and to prevent relapse by establishing healthy lifestyle habits. ETIOBE is composed of three different applications, the Clinician Support System (CSS), the Home Support System (HSS) and the Mobile Support System (MSS). The use of new Information and Communication (ICT) technologies can help clinicians to improve the effectiveness of weight loss treatments, especially in the case of children, and to achieve designated treatment goals. PMID:21559232

[Distance learning using internet in the field of bioengineering].

PubMed

Ciobanu, O

2003-01-01

The Leonardo da Vinci training programme supports innovative transnational initiatives for promoting the knowledge, aptitudes and skills necessary for successful integration into working life. Biomedical engineering is an emerging interdisciplinary field that contributes to understand, define and solve problems in biomedical technology within industrial and health service contexts. Paper presents a Leonardo da Vinci pilot-project called Web-based learning and training in the field of biomedical and design engineering (WEBD). This project has started on 2001. The WEBD project proposes to use advanced learning technologies to provide education in the www. Project uses interactive 3D graphics and virtual reality tools. The WEBD distance training permits users to experience and interact with a life-like model or environment, in safety and at convenient times, while providing a degree of control over the simulation that is usually not possible in the real-life situation.

Pervasive assistive technology for people with dementia: a UCD case

PubMed Central

Rønn-Andersen, Kristoffer V.H.; Bień, Paulina; Özkil, Ali Gürcan; Forchhammer, Birgitte Hysse; Maier, Anja M.

2016-01-01

Smart mobile and wearable technology offers exciting opportunities to support people with dementia (PwD). Its ubiquity and popularity could even benefit user adoption – a great challenge for assistive technology (AT) for PwD that calls for user-centred design (UCD) methods. This study describes a user-centred approach to developing and testing AT based on off-the-shelf pervasive technologies. A prototype is created by combining a smartphone, smartwatch and various applications to offer six support features. This is tested among five end-users (PwD) and their caregivers. Controlled usability testing was followed by field testing in a real-world context. Data is gathered from video recordings, interaction logs, system usability scale questionnaires, logbooks, application usage logs and interviews structured on the unified theory of acceptance and use of technology model. The data is analysed to evaluate usability, usefulness and user acceptance. Results show some promise for user adoption, but highlight challenges to be overcome, emphasising personalisation and familiarity as key considerations. The complete findings regarding usability issues, usefulness of support features and four identified adoption profiles are used to provide a set of recommendations for practitioners and further research. These contribute toward UCD practices for improved smart, pervasive AT for dementia. PMID:28008366

Effects of communication media choice on the quality and efficacy of emergency calls assisted by a mobile nursing protocol tool.

PubMed

Castro, Luis A; Favela, Jesus; Garcia-Peña, Carmen

2014-11-01

The transition from paper to electronic-based records in the healthcare industry has posed several challenges to conventional medical practices. The introduction of technology in day-to-day medical and nursing practices deserves careful consideration. In this work, we report the results of a controlled experiment to compare nurses' consultation in emergency calls in six different conditions. We studied the effect that the type of communication media (face-to-face, telephone, videoconference) and type of nursing protocol media (paper-based, electronic-based) can have on consultation time, mistakes made, pauses during consultation, eye contact, and efficacy of the consultation. We found that the type of communication media has an effect on consultation time; on average, fewer mistakes were made during telephone-based consultations; for eye contact, there were significantly fewer eye contacts during face-to-face than during videoconference consultations; finally, the type of communication media or protocol media did not have any effect in the efficacy of the consultation.

KSC-2011-4167

NASA Image and Video Library

2011-05-28

CAPE CANAVERAL, Fla. -- At NASA Kennedy Space Center's Apollo/Saturn V Center, Jerry Hartman, Education Lead with the Exploration Systems Mission Directorate at NASA Headquarters and Susan Sawyer, Lunabotics Project Coordinator with ReDe/Critique, display the trophy the winning team will receive at the award ceremony for NASA's second annual Lunabotics Mining Competition. Thirty-six teams of undergraduate and graduate students from the United States, Bangladesh, Canada, Colombia and India participated in NASA's Lunabotics Mining Competition May 26 - 28 at the agency's Kennedy Space Center in Florida. The competition is designed to engage and retain students in science, technology, engineering and mathematics (STEM). Teams will maneuver their remote controlled or autonomous excavators, called lunabots, in about 60 tons of ultra-fine simulated lunar soil, called BP-1. The competition is an Exploration Systems Mission Directorate project managed by Kennedy's Education Division. The event also provides a competitive environment that could result in innovative ideas and solutions for NASA's future excavation of the moon. Photo credit: NASA/Jack Pfaller

MEART: The Semi-Living Artist

PubMed Central

Bakkum, Douglas J.; Gamblen, Philip M.; Ben-Ary, Guy; Chao, Zenas C.; Potter, Steve M.

2007-01-01

Here, we and others describe an unusual neurorobotic project, a merging of art and science called MEART, the semi-living artist. We built a pneumatically actuated robotic arm to create drawings, as controlled by a living network of neurons from rat cortex grown on a multi-electrode array (MEA). Such embodied cultured networks formed a real-time closed-loop system which could now behave and receive electrical stimulation as feedback on its behavior. We used MEART and simulated embodiments, or animats, to study the network mechanisms that produce adaptive, goal-directed behavior. This approach to neural interfacing will help instruct the design of other hybrid neural-robotic systems we call hybrots. The interfacing technologies and algorithms developed have potential applications in responsive deep brain stimulation systems and for motor prosthetics using sensory components. In a broader context, MEART educates the public about neuroscience, neural interfaces, and robotics. It has paved the way for critical discussions on the future of bio-art and of biotechnology. PMID:18958276

GSM-Railway as part of the European Rail Traffic Management System

NASA Astrophysics Data System (ADS)

Bibac, Ionut

2007-05-01

GSM-R is a vital component inside the ERTMS which is also an essential element of European Community rail projects; investment in equipping and the rolling stock with ERTMS could reach 5 billion eurodollars in the period 2007-2016. GSM-R is the result of over ten years of collaboration between the various European railway companies, the railway communication industry and the different standardization bodies. GSM-R provides a secure platform for voice and data communication between the operational staff of the railway companies including drivers, dispatchers, shunting team members, train engineers, and station controllers. It delivers advanced features such as group calls, voice broadcast, location based connections, and call pre-emption in case of an emergency, which significantly improves communication, collaboration, and security management across operational staff members. Taking into account the above mentioned, the paper will permit to audience to discover the GSM-R network architecture, services and applications proposed by this technology together with the future development and market situation due to the market liberalization.

DARMA v. Beta 0.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollman, David; Lifflander, Jonathon; Wilke, Jeremiah

2017-03-14

DARMA is a portability layer for asynchronous many-task (AMT) runtime systems. AMT runtime systems show promise to mitigate challenges imposed by next generation high performance computing architectures. However, current runtime system technologies are not production-ready. DARMA is a portability layer that seeks to insulate application developers from idiosyncrasies of individual runtime systems, thereby facilitating application-developer use of these technologies. DARMA comprises a frontend application programming interface (API) for application developers, a backend API for runtime system developers, and a translation that translates frontend API calls into backend API calls. Application developers use C++ abstractions to annotate both data and tasksmore » in their code. The DARMA translation layer uses C++ template metaprogramming to capture data-task dependencies, and provides this information to a potential backend runtime system via a series of backend API calls.« less

Precision Departure Release Capability (PDRC) Technology Description

NASA Technical Reports Server (NTRS)

Engelland, Shawn A.; Capps, Richard; Day, Kevin; Robinson, Corissia; Null, Jody R.

2013-01-01

After takeoff, aircraft must merge into en route (Center) airspace traffic flows which may be subject to constraints that create localized demand-capacity imbalances. When demand exceeds capacity, Traffic Management Coordinators (TMCs) often use tactical departure scheduling to manage the flow of departures into the constrained Center traffic flow. Tactical departure scheduling usually involves use of a Call for Release (CFR) procedure wherein the Tower must call the Center TMC to coordinate a release time prior to allowing the flight to depart. In present-day operations release times are computed by the Center Traffic Management Advisor (TMA) decision support tool based upon manual estimates of aircraft ready time verbally communicated from the Tower to the Center. The TMA-computed release is verbally communicated from the Center back to the Tower where it is relayed to the Local controller as a release window that is typically three minutes wide. The Local controller will manage the departure to meet the coordinated release time window. Manual ready time prediction and verbal release time coordination are labor intensive and prone to inaccuracy. Also, use of release time windows adds uncertainty to the tactical departure process. Analysis of more than one million flights from January 2011 indicates that a significant number of tactically scheduled aircraft missed their en route slot due to ready time prediction uncertainty. Uncertainty in ready time estimates may result in missed opportunities to merge into constrained en route flows and lead to lost throughput. Next Generation Air Transportation System (NextGen) plans call for development of Tower automation systems capable of computing surface trajectory-based ready time estimates. NASA has developed the Precision Departure Release Capability (PDRC) concept that uses this technology to improve tactical departure scheduling by automatically communicating surface trajectory-based ready time predictions to the Center scheduling tool. The PDRC concept also incorporates earlier NASA and FAA research into automation-assisted CFR coordination. The PDRC concept helps reduce uncertainty by automatically communicating coordinated release times with seconds-level precision enabling TMCs to work with target times rather than windows. NASA has developed a PDRC prototype system that integrates the Center's TMA system with a research prototype Tower decision support tool. A two-phase field evaluation was conducted at NASA's North Texas Research Station (NTX) in Dallas-Fort Worth. The field evaluation validated the PDRC concept and demonstrated reduced release time uncertainty while being used for tactical departure scheduling of more than 230 operational flights over 29 weeks of operations. This paper presents the Technology Description. Companion papers include the Final Report and a Concept of Operations.

Determinants of mobile phone output power in a multinational study: implications for exposure assessment.

PubMed

Vrijheid, M; Mann, S; Vecchia, P; Wiart, J; Taki, M; Ardoino, L; Armstrong, B K; Auvinen, A; Bédard, D; Berg-Beckhoff, G; Brown, J; Chetrit, A; Collatz-Christensen, H; Combalot, E; Cook, A; Deltour, I; Feychting, M; Giles, G G; Hepworth, S J; Hours, M; Iavarone, I; Johansen, C; Krewski, D; Kurttio, P; Lagorio, S; Lönn, S; McBride, M; Montestrucq, L; Parslow, R C; Sadetzki, S; Schüz, J; Tynes, T; Woodward, A; Cardis, E

2009-10-01

The output power of a mobile phone is directly related to its radiofrequency (RF) electromagnetic field strength, and may theoretically vary substantially in different networks and phone use circumstances due to power control technologies. To improve indices of RF exposure for epidemiological studies, we assessed determinants of mobile phone output power in a multinational study. More than 500 volunteers in 12 countries used Global System for Mobile communications software-modified phones (GSM SMPs) for approximately 1 month each. The SMPs recorded date, time, and duration of each call, and the frequency band and output power at fixed sampling intervals throughout each call. Questionnaires provided information on the typical circumstances of an individual's phone use. Linear regression models were used to analyse the influence of possible explanatory variables on the average output power and the percentage call time at maximum power for each call. Measurements of over 60,000 phone calls showed that the average output power was approximately 50% of the maximum, and that output power varied by a factor of up to 2 to 3 between study centres and network operators. Maximum power was used during a considerable proportion of call time (39% on average). Output power decreased with increasing call duration, but showed little variation in relation to reported frequency of use while in a moving vehicle or inside buildings. Higher output powers for rural compared with urban use of the SMP were observed principally in Sweden where the study covered very sparsely populated areas. Average power levels are substantially higher than the minimum levels theoretically achievable in GSM networks. Exposure indices could be improved by accounting for average power levels of different telecommunications systems. There appears to be little value in gathering information on circumstances of phone use other than use in very sparsely populated regions.

Generic Modeling of a Life Support System for Process Technology Comparison

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

Advanced Data Acquisition System Implementation for the ITER Neutron Diagnostic Use Case Using EPICS and FlexRIO Technology on a PXIe Platform

NASA Astrophysics Data System (ADS)

Sanz, D.; Ruiz, M.; Castro, R.; Vega, J.; Afif, M.; Monroe, M.; Simrock, S.; Debelle, T.; Marawar, R.; Glass, B.

2016-04-01

To aid in assessing the functional performance of ITER, Fission Chambers (FC) based on the neutron diagnostic use case deliver timestamped measurements of neutron source strength and fusion power. To demonstrate the Plant System Instrumentation & Control (I&C) required for such a system, ITER Organization (IO) has developed a neutron diagnostics use case that fully complies with guidelines presented in the Plant Control Design Handbook (PCDH). The implementation presented in this paper has been developed on the PXI Express (PXIe) platform using products from the ITER catalog of standard I&C hardware for fast controllers. Using FlexRIO technology, detector signals are acquired at 125 MS/s, while filtering, decimation, and three methods of neutron counting are performed in real-time via the onboard Field Programmable Gate Array (FPGA). Measurement results are reported every 1 ms through Experimental Physics and Industrial Control System (EPICS) Channel Access (CA), with real-time timestamps derived from the ITER Timing Communication Network (TCN) based on IEEE 1588-2008. Furthermore, in accordance with ITER specifications for CODAC Core System (CCS) application development, the software responsible for the management, configuration, and monitoring of system devices has been developed in compliance with a new EPICS module called Nominal Device Support (NDS) and RIO/FlexRIO design methodology.

Volvo drivers' experiences with advanced crash avoidance and related technologies.

PubMed

Eichelberger, Angela H; McCartt, Anne T

2014-01-01

Crash avoidance technologies can potentially prevent or mitigate many crashes, but their success depends in part on driver acceptance. Owners of 2010-2012 model Volvo vehicles with several technologies were interviewed about their experiences. Interviews were conducted in summer 2012 with 155 owners of vehicles with City Safety as a standard feature; 145 owners with an optional technology package that included adaptive cruise control, distance alert, collision warning with full auto brake (and pedestrian detection on certain models), driver alert control, and lane departure warning; and 172 owners with both City Safety and the technology package. The survey response rates were 21 percent for owners with City Safety, 30 percent for owners with the technology package, and 27 percent for owners with both. Ten percent of owners opted out before the telephone survey began, and 18 percent declined to participate when called. Despite some annoyance, most respondents always leave the systems on, although fewer do so for lane departure warning (59%). For each of the systems, at least 80 percent of respondents with the system would want it on their next vehicle. Many respondents reported safer driving habits with the systems (e.g., following less closely with adaptive cruise control, using turn signals more often with lane departure warning). Fewer respondents reported potentially unsafe behavior, such as allowing the vehicle to brake for them at least some of the time. About one third of respondents experienced autonomous braking when they believed they were at risk of crashing, and about one fifth of respondents thought it had prevented a crash. About one fifth of respondents with the technology package reported that they were confused or misunderstood which safety system had activated in their vehicle. Consistent with the results for early adopters in the previous survey of Volvo and Infiniti owners, the present survey found that driver acceptance of the technologies remains high, although less so for lane departure warning. This study is the first to report drivers' experiences with City Safety, a collision avoidance system provided as standard equipment on certain Volvo 2010-2012 models, and driver acceptance of this system was high, although not to the same extent as the optional forward collision avoidance system. Future research should continue to monitor drivers' experiences with these technologies as they become available in more vehicles.

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE PAGES

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; ...

2017-04-26

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States.

PubMed

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; Heath, Garvin

2017-06-06

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain major source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called "major" or "minor") has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.

Rapid prototyping and stereolithography in dentistry

PubMed Central

Nayar, Sanjna; Bhuminathan, S.; Bhat, Wasim Manzoor

2015-01-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena. PMID:26015715

Development of a High-Fidelity Simulation Environment for Shadow-Mode Assessments of Air Traffic Concepts

NASA Technical Reports Server (NTRS)

Lee, Alan G.; Robinson, John E.; Lai, Chok Fung

2017-01-01

This paper will describe the purpose, architecture, and implementation of a gate-to-gate, high-fidelity air traffic simulation environment called the Shadow Mode Assessment using Realistic Technologies for the National Airspace System (SMART-NAS) Test Bed.The overarching purpose of the SMART-NAS Test Bed (SNTB) is to conduct high-fidelity, real-time, human-in-the-loop and automation-in-the-loop simulations of current and proposed future air traffic concepts for the Next Generation Air Transportation System of the United States, called NextGen. SNTB is intended to enable simulations that are currently impractical or impossible for three major areas of NextGen research and development: Concepts across multiple operational domains such as the gate-to-gate trajectory-based operations concept; Concepts related to revolutionary operations such as the seamless and widespread integration of large and small Unmanned Aerial System (UAS) vehicles throughout U.S. airspace; Real-time system-wide safety assurance technologies to allow safe, increasingly autonomous aviation operations. SNTB is primarily accessed through a web browser. A set of secure support services are provided to simplify all aspects of real-time, human-in-the-loop and automation-in-the-loop simulations from design (i.e., prior to execution) through analysis (i.e., after execution). These services include simulation architecture and asset configuration; scenario generation; command, control and monitoring; and analysis support.

Rapid prototyping and stereolithography in dentistry.

PubMed

Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

2015-04-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

A randomized controlled study about the use of eHealth in the home health care of premature infants.

PubMed

Gund, Anna; Sjöqvist, Bengt Arne; Wigert, Helena; Hentz, Elisabet; Lindecrantz, Kaj; Bry, Kristina

2013-02-09

One area where the use of information and communication technology (ICT), or eHealth, could be developed is the home health care of premature infants. The aim of this randomized controlled study was to investigate whether the use of video conferencing or a web application improves parents' satisfaction in taking care of a premature infant at home and decreases the need of home visits. In addition, nurses' attitudes regarding the use of these tools were examined. Thirty-four families were randomized to one of three groups before their premature infant was discharged from the hospital to home health care: a control group receiving standard home health care (13 families); a web group receiving home health care supplemented with the use of a web application (12 families); a video group with home health care supplemented with video conferencing using Skype (9 families). Families and nursing staff answered questionnaires about the usefulness of ICT. In addition, semi-structured interviews were conducted with 16 families. All the parents in the web group found the web application easy to use. 83% of the families thought it was good to have access to their child's data through the application. All the families in the video group found Skype easy to use and were satisfied with the video calls. 88% of the families thought that video calls were better than ordinary phone calls. 33% of the families in the web group and 75% of those in the video group thought the need for home visits was decreased by the web application or Skype. 50% of the families in the web group and 100% of those in the video group thought the web application or the video calls had helped them feel more confident in caring for their child. Most of the nurses were motivated to use ICT but some were reluctant and avoided using the web application and video conferencing. The families were satisfied with both the web application and video conferencing. The families readily embraced the use of ICT, whereas motivating some of the nurses to accept and use ICT was a major challenge.

A randomized controlled study about the use of eHealth in the home health care of premature infants

PubMed Central

2013-01-01

Background One area where the use of information and communication technology (ICT), or eHealth, could be developed is the home health care of premature infants. The aim of this randomized controlled study was to investigate whether the use of video conferencing or a web application improves parents’ satisfaction in taking care of a premature infant at home and decreases the need of home visits. In addition, nurses’ attitudes regarding the use of these tools were examined. Method Thirty-four families were randomized to one of three groups before their premature infant was discharged from the hospital to home health care: a control group receiving standard home health care (13 families); a web group receiving home health care supplemented with the use of a web application (12 families); a video group with home health care supplemented with video conferencing using Skype (9 families). Families and nursing staff answered questionnaires about the usefulness of ICT. In addition, semi-structured interviews were conducted with 16 families. Results All the parents in the web group found the web application easy to use. 83% of the families thought it was good to have access to their child’s data through the application. All the families in the video group found Skype easy to use and were satisfied with the video calls. 88% of the families thought that video calls were better than ordinary phone calls. 33% of the families in the web group and 75% of those in the video group thought the need for home visits was decreased by the web application or Skype. 50% of the families in the web group and 100% of those in the video group thought the web application or the video calls had helped them feel more confident in caring for their child. Most of the nurses were motivated to use ICT but some were reluctant and avoided using the web application and video conferencing. Conclusion The families were satisfied with both the web application and video conferencing. The families readily embraced the use of ICT, whereas motivating some of the nurses to accept and use ICT was a major challenge. PMID:23394465

Horizon: A Proposal for Large Aperture, Active Optics in Geosynchronous Orbit

NASA Technical Reports Server (NTRS)

Chesters, Dennis; Jenstrom, Del

2000-01-01

In 1999, NASA's New Millennium Program called for proposals to validate new technology in high-earth orbit for the Earth Observing-3 (NMP EO3) mission to fly in 2003. In response, we proposed to test a large aperture, active optics telescope in geosynchronous orbit. This would flight-qualify new technologies for both Earth and Space science: 1) a future instrument with LANDSAT image resolution and radiometric quality watching continuously from geosynchronous station, and 2) the Next Generation Space Telescope (NGST) for deep space imaging. Six enabling technologies were to be flight-qualified: 1) a 3-meter, lightweight segmented primary mirror, 2) mirror actuators and mechanisms, 3) a deformable mirror, 4) coarse phasing techniques, 5) phase retrieval for wavefront control during stellar viewing, and 6) phase diversity for wavefront control during Earth viewing. Three enhancing technologies were to be flight- validated: 1) mirror deployment and latching mechanisms, 2) an advanced microcontroller, and 3) GPS at GEO. In particular, two wavefront sensing algorithms, phase retrieval by JPL and phase diversity by ERIM International, were to sense optical system alignment and focus errors, and to correct them using high-precision mirror mechanisms. Active corrections based on Earth scenes are challenging because phase diversity images must be collected from extended, dynamically changing scenes. In addition, an Earth-facing telescope in GEO orbit is subject to a powerful diurnal thermal and radiometric cycle not experienced by deep-space astronomy. The Horizon proposal was a bare-bones design for a lightweight large-aperture, active optical system that is a practical blend of science requirements, emerging technologies, budget constraints, launch vehicle considerations, orbital mechanics, optical hardware, phase-determination algorithms, communication strategy, computational burdens, and first-rate cooperation among earth and space scientists, engineers and managers. This manuscript presents excerpts from the Horizon proposal's sections that describe the Earth science requirements, the structural -thermal-optical design, the wavefront sensing and control, and the on-orbit validation.

The optimal blood glucose level for critically ill adult patients.

PubMed

Lv, Shaoning; Ross, Paul; Tori, Kathleen

2017-09-01

Glycaemic control is recognized as one of the important aspects in managing critically ill patients. Both hyperglycaemia and hypoglycaemia independently increase the risk of patient mortality. Hence, the identification of optimal glycaemic control is of paramount importance in the management of critically ill patients. The aim of this literature review is to examine the current status of glycaemic control in critically ill adult patients. This literature review will focus on randomized controlled trials comparing intensive insulin therapy to conventional insulin therapy, with an objective to identify optimal blood glucose level targets for critically ill adult patients. A literature review was conducted to identify large randomized controlled trials for the optimal targeted blood glucose level for critically ill adult patients published since 2000. A total of eight studies fulfilled the selection criteria of this review. With current human and technology resources, the results of the studies support commencing glycaemic control once the blood glucose level of critically ill patients reaches 10 mmol/L and maintaining this level between 8 mmol/L and 10 mmol/L. This literature review provides a recommendation for targeting the optimal blood glucose level for critically ill patients within moderate blood glucose level target range (8-10 mmol/L). The need for uniformed glucometrics for unbiased reporting and further research for optimal blood glucose target is required, especially in light of new technological advancements in closed-loop insulin delivery and monitoring devices. This literature review has revealed a need to call for consensus in the measurement and reporting of glycaemic control using standardized glucometrics. © 2017 British Association of Critical Care Nurses.

The new holism: P4 systems medicine and the medicalization of health and life itself.

PubMed

Vogt, Henrik; Hofmann, Bjørn; Getz, Linn

2016-06-01

The emerging concept of systems medicine (or 'P4 medicine'-predictive, preventive, personalized and participatory) is at the vanguard of the post-genomic movement towards 'precision medicine'. It is the medical application of systems biology, the biological study of wholes. Of particular interest, P4 systems medicine is currently promised as a revolutionary new biomedical approach that is holistic rather than reductionist. This article analyzes its concept of holism, both with regard to methods and conceptualization of health and disease. Rather than representing a medical holism associated with basic humanistic ideas, we find a technoscientific holism resulting from altered technological and theoretical circumstances in biology. We argue that this holism, which is aimed at disease prevention and health optimization, points towards an expanded form of medicalization, which we call 'holistic medicalization': Each person's whole life process is defined in biomedical, technoscientific terms as quantifiable and controllable and underlain a regime of medical control that is holistic in that it is all-encompassing. It is directed at all levels of functioning, from the molecular to the social, continual throughout life and aimed at managing the whole continuum from cure of disease to optimization of health. We argue that this medicalization is a very concrete materialization of a broader trend in medicine and society, which we call 'the medicalization of health and life itself'. We explicate this holistic medicalization, discuss potential harms and conclude by calling for preventive measures aimed at avoiding eventual harmful effects of overmedicalization in systems medicine (quaternary prevention).

Tapping Technology's Potential: Shrinking Budgets, Looming Standards, and a Dizzying Array of Innovations Are Changing the Professional Learning Landscape

ERIC Educational Resources Information Center

Killion, Joellen

2013-01-01

As the call for professional learning that incorporates ongoing feedback and support increases and resources to address that need decline, more states, districts, schools, and individuals are turning to technology. Technology creates significant opportunities for more focused professional learning, especially when it is effectively integrated into…

The Impact of Technological Change; The American Experience. Studies in Employment and Unemployment.

ERIC Educational Resources Information Center

Haber, William; And Others

Technological change is a complex term involving many more factors than "changes in machinery or automation." Six changes which affect jobs and influence skills in our industrial systems that could logically be called technological change have been identified: (1) scientific management, or time and motion studies, (2) mergers and consolidations,…

Teaching the English Language Arts with Technology: A Critical Approach and Pedagogical Framework

ERIC Educational Resources Information Center

Young, Carl A.; Bush, Jonathan

2004-01-01

In order to cultivate the kind of technology literacy in our students called for by leaders in the field, it must simultaneously be cultivated in our teachers. While the literature in the field of English education demonstrates the efficacy of computer technology in writing instruction and addresses its impact on the evolving definition of…

The Effect of Automatic Speech Recognition Eyespeak Software on Iraqi Students' English Pronunciation: A Pilot Study

ERIC Educational Resources Information Center

Sidgi, Lina Fathi Sidig; Shaari, Ahmad Jelani

2017-01-01

The use of technology, such as computer-assisted language learning (CALL), is used in teaching and learning in the foreign language classrooms where it is most needed. One promising emerging technology that supports language learning is automatic speech recognition (ASR). Integrating such technology, especially in the instruction of pronunciation…

How Technology Transforms Journalism Business through Citizen-Reporters in Nigeria

ERIC Educational Resources Information Center

Aborisade, Olubunmi P.

2010-01-01

The use of technology and media modalities in digital technologies in today's media has created a new form of journalism. While some call it citizen-reporting, some dub it we media, or participatory news reporting. The new press evolves with the engagement of ordinary citizens in news gathering and distribution. Apart from helping to enhance the…

Do Professors Dream of Electronic Students? Faculty Anxiety and the New Information Technologies.

ERIC Educational Resources Information Center

Novek, Eleanor M.

This survey of faculty attitudes toward technology calls for more critical dialogue on the uses, effects and hidden costs of information technology in the classroom and the national political economy. A survey was administered to 250 faculty members (135 were returned) at a northeastern university. The comments of respondents fell into two main…

A Smart Partnership: Integrating Educational Technology for Underserved Children in India

ERIC Educational Resources Information Center

Charania, Amina; Davis, Niki

2016-01-01

This paper explores the evolution of a large multi-stakeholder partnership that has grown since 2011 to scale deep engagement with learning through technology and decrease the digital divide for thousands of underserved school children in India. Using as its basis a case study of an initiative called integrated approach to technology in education…

An Innovative Dialogue about College Drinking: Developing an Immediate Response Technology Model for Health Promotion

ERIC Educational Resources Information Center

LeGreco, Marianne; Hess, Aaron; Lederman, Linda C.; Schuwerk, Tara; LaValley, Angela G.

2010-01-01

New communication technologies, including personal response "clickers," have become increasingly popular across college campuses as a way to promote a wide range of practices. This paper calls attention to the need for communication models that account for the usefulness of these new technologies, especially as they relate to health promotion,…

Technology in Our Schools: A Call for a Cost/Benefit Analysis

ERIC Educational Resources Information Center

Wilhelm, Jeffrey D.

2010-01-01

Wilhelm is a vocal advocate for the substantive integration of technology into language arts classes in ways that support the "critical" use of technologies and the learning of new concepts and procedures for reading and composing. He makes the case that no one can be considered fully literate without a familiarity with and appreciation for our…

77 FR 48157 - Office of the National Coordinator for Health Information Technology; Announcement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... on YouTube.com or Vimeo.com (the Video should be no longer than 2 minutes); A text description of... open call for the public to create short, inspiring videos sharing how you use technology to manage... Challenge invites you to create short, inspiring videos sharing how you use technology to manage your...

Progress Report on Coordinating Federal Science, Technology, Engineering, and Mathematics (STEM) Education

ERIC Educational Resources Information Center

Executive Office of the President, 2016

2016-01-01

As called for in the America COMPETES Reauthorization Act of 2010, the National Science and Technology Council's (NSTC) Committee on STEM Education (CoSTEM) released, in May of 2013, the Federal Science, Technology, Engineering, and Mathematics (STEM) Education 5- Year Strategic Plan (Strategic Plan). As required by the Act, this report includes…

Trends in the Development of Technology and Engineering Education in Emerging Economies

ERIC Educational Resources Information Center

Adegbuyi, P. A. O.; Uhomoibhi, J. O.

2008-01-01

Purpose: The purpose of this paper is to report on the nature of technology and engineering education provision in developing economies, focusing on Nigeria. Design/methodology/approach: The paper draws on recent developments in the shake up and implementation of new measures to call for quality technology and engineering education in the country,…

Versatile synchronized real-time MEG hardware controller for large-scale fast data acquisition.

PubMed

Sun, Limin; Han, Menglai; Pratt, Kevin; Paulson, Douglas; Dinh, Christoph; Esch, Lorenz; Okada, Yoshio; Hämäläinen, Matti

2017-05-01

Versatile controllers for accurate, fast, and real-time synchronized acquisition of large-scale data are useful in many areas of science, engineering, and technology. Here, we describe the development of a controller software based on a technique called queued state machine for controlling the data acquisition (DAQ) hardware, continuously acquiring a large amount of data synchronized across a large number of channels (>400) at a fast rate (up to 20 kHz/channel) in real time, and interfacing with applications for real-time data analysis and display of electrophysiological data. This DAQ controller was developed specifically for a 384-channel pediatric whole-head magnetoencephalography (MEG) system, but its architecture is useful for wide applications. This controller running in a LabVIEW environment interfaces with microprocessors in the MEG sensor electronics to control their real-time operation. It also interfaces with a real-time MEG analysis software via transmission control protocol/internet protocol, to control the synchronous acquisition and transfer of the data in real time from >400 channels to acquisition and analysis workstations. The successful implementation of this controller for an MEG system with a large number of channels demonstrates the feasibility of employing the present architecture in several other applications.

Versatile synchronized real-time MEG hardware controller for large-scale fast data acquisition

NASA Astrophysics Data System (ADS)

Sun, Limin; Han, Menglai; Pratt, Kevin; Paulson, Douglas; Dinh, Christoph; Esch, Lorenz; Okada, Yoshio; Hämäläinen, Matti

2017-05-01

Versatile controllers for accurate, fast, and real-time synchronized acquisition of large-scale data are useful in many areas of science, engineering, and technology. Here, we describe the development of a controller software based on a technique called queued state machine for controlling the data acquisition (DAQ) hardware, continuously acquiring a large amount of data synchronized across a large number of channels (>400) at a fast rate (up to 20 kHz/channel) in real time, and interfacing with applications for real-time data analysis and display of electrophysiological data. This DAQ controller was developed specifically for a 384-channel pediatric whole-head magnetoencephalography (MEG) system, but its architecture is useful for wide applications. This controller running in a LabVIEW environment interfaces with microprocessors in the MEG sensor electronics to control their real-time operation. It also interfaces with a real-time MEG analysis software via transmission control protocol/internet protocol, to control the synchronous acquisition and transfer of the data in real time from >400 channels to acquisition and analysis workstations. The successful implementation of this controller for an MEG system with a large number of channels demonstrates the feasibility of employing the present architecture in several other applications.

Implementation of an Adaptive Controller System from Concept to Flight Test

NASA Technical Reports Server (NTRS)

Larson, Richard R.; Burken, John J.; Butler, Bradley S.; Yokum, Steve

2009-01-01

The National Aeronautics and Space Administration Dryden Flight Research Center (Edwards, California) is conducting ongoing flight research using adaptive controller algorithms. A highly modified McDonnell-Douglas NF-15B airplane called the F-15 Intelligent Flight Control System (IFCS) is used to test and develop these algorithms. Modifications to this airplane include adding canards and changing the flight control systems to interface a single-string research controller processor for neural network algorithms. Research goals include demonstration of revolutionary control approaches that can efficiently optimize aircraft performance in both normal and failure conditions and advancement of neural-network-based flight control technology for new aerospace system designs. This report presents an overview of the processes utilized to develop adaptive controller algorithms during a flight-test program, including a description of initial adaptive controller concepts and a discussion of modeling formulation and performance testing. Design finalization led to integration with the system interfaces, verification of the software, validation of the hardware to the requirements, design of failure detection, development of safety limiters to minimize the effect of erroneous neural network commands, and creation of flight test control room displays to maximize human situational awareness; these are also discussed.

Promoting transportation applications in defense conversion and other advanced technologies : summary of proceedings January 1994

DOT National Transportation Integrated Search

1994-01-01

From September-November 1993, U.S. Department of Transportation (DOT) Secretary Federico Pena sponsored a series of meetings, called "Promoting Transportation Applications in Defense Conversion and Other Advanced Technologies," to advance President B...

System Operations Studies for Automated Guideway Transit Systems : Discrete Event Simulation Model Programmer's Manual

DOT National Transportation Integrated Search

1982-07-01

In order to examine specific automated guideway transit (AGT) developments and concepts, UMTA undertook a program of studies and technology investigations called Automated Guideway Transit Technology (AGTT) Program. The objectives of one segment of t...

Systems Operations Studies for Automated Guideway Transit Systems : System Availability Model Programmer's Manual

DOT National Transportation Integrated Search

1981-07-01

In order to examine specific automated guideway transit (AGT) developments and concepts, UMTA undertook a program of studies and technology investigations called Automated Guideway Transit Technology (AGTT) Program. The objectives of one segment of t...

Innovative Technology in Engineering Education.

ERIC Educational Resources Information Center

Fishwick, Wilfred

1991-01-01

Discusses the impact that computer-assisted technologies, including applications to software, video recordings, and satellite broadcasts, have had upon the conventions and procedures within engineering education. Calls for the complete utilization of such devices through their appropriate integration into updated education activities effectively…

Waste-to-Energy Decision Support Method for Forward Deployed Forces

DTIC Science & Technology

2014-03-27

15 Gasification ...stable electrical source to generate the plasma. Thermal WTE technology includes three subtypes called incineration, gasification , and pyrolysis...unfavorable public perception associated with the emissions produced by the technology. Gasification Gasification is a thermal process in which

Track and track-side video survey technology development.

DOT National Transportation Integrated Search

2015-05-01

Researchers at HiDef/Createc have completed prototype development and testing of a novel track video surveying technology : called Track and Track-Side Video Survey (TTVS). TTVS is designed to capture clear video images of the track and track side : ...

NASA Tech House

NASA Technical Reports Server (NTRS)

1977-01-01

The NASA Technology Utilization House, called Tech House, was designed and constructed at NASA's Langley Research Center in Hampton, Virginia, to demonstrate new technology that is available or will be available in the next several years and how the application of aerospace technology could help advance the homebuilding industry. Solar energy use, energy and water conservation, safety, security, and cost were major considerations in adapting the aerospace technology to the construction of Tech House.

Vocal parameters that indicate threat level correlate with FOS immunolabeling in social and vocal control brain regions.

PubMed

Ellis, Jesse M S; Riters, Lauren V

2012-01-01

Transmitting information via communicative signals is integral to interacting with conspecifics, and some species achieve this task by varying vocalizations to reflect context. Although signal variation is critical to social interactions, the underlying neural control has not been studied. In response to a predator, black-capped chickadees (Poecile atricapilla) produce mobbing calls (chick-a-dee calls) with various parameters, some of which convey information about the threat stimulus. We predicted that vocal parameters indicative of threat would be associated with distinct patterns of neuronal activity within brain areas involved in social behavior and those involved in the sensorimotor control of vocal production. To test this prediction, we measured the syntax and structural aspects of chick-a-dee call production in response to a hawk model and assessed the protein product of the immediate early gene FOS in brain regions implicated in context-specific vocal and social behavior. These regions include the medial preoptic area (POM) and lateral septum (LS), as well as regions involved in vocal motor control, including the dorsomedial nucleus of the intercollicular complex and the HVC. We found correlations linking call rate (previously demonstrated to reflect threat) to labeling in the POM and LS. Labeling in the HVC correlated with the number of D notes per call, which may also signal threat level. Labeling in the call control region dorsomedial nucleus was associated with the structure of D notes and the overall number of notes, but not call rate or type of notes produced. These results suggest that the POM and LS may influence attributes of vocalizations produced in response to predators and that the brain region implicated in song control, the HVC, also influences call production. Because variation in chick-a-dee call rate indicates predator threat, we speculate that these areas could integrate with motor control regions to imbue mobbing signals with additional information about threat level. Copyright © 2011 S. Karger AG, Basel.

77 FR 70211 - Agency Information Collection Activities (Call Center Satisfaction Survey) Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0744] Agency Information Collection Activities (Call Center Satisfaction Survey) Under OMB Review AGENCY: Veterans Benefits Administration...: VBA Call Center Satisfaction Survey. OMB Control Number: 2900-0744. Type of Review: Extension of a...

Transport infrastructure surveillance and monitoring by electromagnetic sensing: the ISTIMES project.

PubMed

Proto, Monica; Bavusi, Massimo; Bernini, Romeo; Bigagli, Lorenzo; Bost, Marie; Bourquin, Frédrèric; Cottineau, Louis-Marie; Cuomo, Vincenzo; Della Vecchia, Pietro; Dolce, Mauro; Dumoulin, Jean; Eppelbaum, Lev; Fornaro, Gianfranco; Gustafsson, Mats; Hugenschmidt, Johannes; Kaspersen, Peter; Kim, Hyunwook; Lapenna, Vincenzo; Leggio, Mario; Loperte, Antonio; Mazzetti, Paolo; Moroni, Claudio; Nativi, Stefano; Nordebo, Sven; Pacini, Fabrizio; Palombo, Angelo; Pascucci, Simone; Perrone, Angela; Pignatti, Stefano; Ponzo, Felice Carlo; Rizzo, Enzo; Soldovieri, Francesco; Taillade, Fédrèric

2010-01-01

The ISTIMES project, funded by the European Commission in the frame of a joint Call "ICT and Security" of the Seventh Framework Programme, is presented and preliminary research results are discussed. The main objective of the ISTIMES project is to design, assess and promote an Information and Communication Technologies (ICT)-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring of critical transport infrastructures. The integration of electromagnetic technologies with new ICT information and telecommunications systems enables remotely controlled monitoring and surveillance and real time data imaging of the critical transport infrastructures. The project exploits different non-invasive imaging technologies based on electromagnetic sensing (optic fiber sensors, Synthetic Aperture Radar satellite platform based, hyperspectral spectroscopy, Infrared thermography, Ground Penetrating Radar-, low-frequency geophysical techniques, Ground based systems for displacement monitoring). In this paper, we show the preliminary results arising from the GPR and infrared thermographic measurements carried out on the Musmeci bridge in Potenza, located in a highly seismic area of the Apennine chain (Southern Italy) and representing one of the test beds of the project.

Intelligent buildings.

PubMed

Williams, W E

1987-01-01

The maturing of technologies in computer capabilities, particularly direct digital signals, has provided an exciting variety of new communication and facility control opportunities. These include telecommunications, energy management systems, security systems, office automation systems, local area networks, and video conferencing. New applications are developing continuously. The so-called "intelligent" or "smart" building concept evolves from the development of this advanced technology in building environments. Automation has had a dramatic effect on facility planning. For decades, communications were limited to the telephone, the typewritten message, and copy machines. The office itself and its functions had been essentially unchanged for decades. Office automation systems began to surface during the energy crisis and, although their newer technology was timely, they were, for the most part, designed separately from other new building systems. For example, most mainframe computer systems were originally stand-alone, as were word processing installations. In the last five years, the advances in distributive systems, networking, and personal computer capabilities have provided opportunities to make such dramatic improvements in productivity that the Selectric typewriter has gone from being the most advanced piece of office equipment to nearly total obsolescence.

Introduction to the HL-LHC Project

NASA Astrophysics Data System (ADS)

Rossi, L.; Brüning, O.

The Large Hadron Collider (LHC) is one of largest scientific instruments ever built. It has been exploring the new energy frontier since 2010, gathering a global user community of 7,000 scientists. To extend its discovery potential, the LHC will need a major upgrade in the 2020s to increase its luminosity (rate of collisions) by a factor of five beyond its design value and the integrated luminosity by a factor of ten. As a highly complex and optimized machine, such an upgrade of the LHC must be carefully studied and requires about ten years to implement. The novel machine configuration, called High Luminosity LHC (HL-LHC), will rely on a number of key innovative technologies, representing exceptional technological challenges, such as cutting-edge 11-12 tesla superconducting magnets, very compact superconducting cavities for beam rotation with ultra-precise phase control, new technology for beam collimation and 300-meter-long high-power superconducting links with negligible energy dissipation. HL-LHC federates efforts and R&D of a large community in Europe, in the US and in Japan, which will facilitate the implementation of the construction phase as a global project.

Social Autonomy and Heteronomy in the Age of ICT: The Digital Pharmakon and the (Dis)Empowerment of the General Intellect.

PubMed

Lemmens, Pieter

2017-01-01

'The art of living with ICTs (information and communication technologies)' today not only means finding new ways to cope, interact and create new lifestyles on the basis of the new digital (network) technologies individually , as 'consumer-citizens'. It also means inventing new modes of living, producing and, not in the least place, struggling collectively , as workers and producers. As the so-called digital revolution unfolds in the context of a neoliberal cognitive and consumerist capitalism, its 'innovations' are predominantly employed to modulate and control both production processes and consumer behavior in view of the overall goal of extracting surplus value. Today, the digital networks overwhelmingly destroy social autonomy, instead engendering increasing social heteronomy and proletarianization. Yet it is these very networks themselves, as technical pharmaka in the sense of French 'technophilosopher' Bernard Stiegler, that can be employed as no other to struggle against this tendency. This paper briefly explores this possibility by reflecting upon current diagnoses of our 'technological situation' by some exemplary post-operaist Marxists from a Stieglerian, pharmacological perspective.

Transport Infrastructure Surveillance and Monitoring by Electromagnetic Sensing: The ISTIMES Project

PubMed Central

Proto, Monica; Bavusi, Massimo; Bernini, Romeo; Bigagli, Lorenzo; Bost, Marie; Bourquin, Frédrèric.; Cottineau, Louis-Marie; Cuomo, Vincenzo; Vecchia, Pietro Della; Dolce, Mauro; Dumoulin, Jean; Eppelbaum, Lev; Fornaro, Gianfranco; Gustafsson, Mats; Hugenschmidt, Johannes; Kaspersen, Peter; Kim, Hyunwook; Lapenna, Vincenzo; Leggio, Mario; Loperte, Antonio; Mazzetti, Paolo; Moroni, Claudio; Nativi, Stefano; Nordebo, Sven; Pacini, Fabrizio; Palombo, Angelo; Pascucci, Simone; Perrone, Angela; Pignatti, Stefano; Ponzo, Felice Carlo; Rizzo, Enzo; Soldovieri, Francesco; Taillade, Fédrèric

2010-01-01

The ISTIMES project, funded by the European Commission in the frame of a joint Call “ICT and Security” of the Seventh Framework Programme, is presented and preliminary research results are discussed. The main objective of the ISTIMES project is to design, assess and promote an Information and Communication Technologies (ICT)-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring of critical transport infrastructures. The integration of electromagnetic technologies with new ICT information and telecommunications systems enables remotely controlled monitoring and surveillance and real time data imaging of the critical transport infrastructures. The project exploits different non-invasive imaging technologies based on electromagnetic sensing (optic fiber sensors, Synthetic Aperture Radar satellite platform based, hyperspectral spectroscopy, Infrared thermography, Ground Penetrating Radar-, low-frequency geophysical techniques, Ground based systems for displacement monitoring). In this paper, we show the preliminary results arising from the GPR and infrared thermographic measurements carried out on the Musmeci bridge in Potenza, located in a highly seismic area of the Apennine chain (Southern Italy) and representing one of the test beds of the project. PMID:22163489

Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology

NASA Astrophysics Data System (ADS)

Musalek, Radek; Medricky, Jan; Tesar, Tomas; Kotlan, Jiri; Pala, Zdenek; Lukac, Frantisek; Chraska, Tomas; Curry, Nicholas

2017-01-01

Technology of water-stabilized plasma torch was recently substantially updated through introduction of a so-called hybrid concept that combines benefits of water stabilization and gas stabilization principles. The high-enthalpy plasma provided by the WSP-H ("hybrid") torch may be used for thermal spraying of powders as well as liquid feedstocks with high feed rates. In this study, results from three selected experiments with suspension plasma spraying with WSP-H technology are presented. Possibility of deposition of coatings with controlled microstructures was demonstrated for three different ceramics (YSZ—yttria-stabilized zirconia, YAG—yttrium aluminum garnet and Al2O3) introduced into ethanol-based suspensions. Shadowgraphy was used for optimization of suspension injection and visualization of the liquid fragmentation in the plasma jet. Coatings were deposited onto substrates attached to the rotating carousel with integrated temperature monitoring and air cooling, which provided an excellent reproducibility of the deposition process. Deposition of columnar-like YSZ and dense YAG and Al2O3 coatings was successfully achieved. Deposition efficiency reached more than 50%, as evaluated according to EN ISO 17 836 standard.

Classification of unconscious like/dislike decisions: First results towards a novel application for BCI technology.

PubMed

Wriessnegger, S C; Hackhofer, D; Muller-Putz, G R

2015-01-01

More and more applications for BCI technology emerge that are not restricted to communication or control, like gaming, rehabilitation, Neuro-IS research, neuro-economics or security. In this context a so called passive BCI, a system that derives its outputs from arbitrary brain activity for enriching a human-machine interaction with implicit information on the actual user state will be used. Concretely EEG-based BCI technology enables the use of signals related to attention, intentions and mental state, without relying on indirect measures based on overt behavior or other physiological signals which is an important point e.g. in Neuromarketing research. The scope of this pilot EEG-study was to detect like/dislike decisions on car stimuli just by means of ERP analysis. Concretely to define user preferences concerning different car designs by implementing an offline BCI based on shrinkage LDA classification. Although classification failed in the majority of participants the elicited early (sub) conscious ERP components reflect user preferences for cars. In a broader sense this study should pave the way towards a "product design BCI" suitable for neuromarketing research.

The Golden Canopies (Infant Radiant Warmer)

NASA Technical Reports Server (NTRS)

1978-01-01

The cradle warmer is based on technology in heated transparent materials developed by Sierracin Corporation, Sylmar, California he original application was in heated faceplates for the pressure suit heated faceplates worn by pilots of an Air Force/NASA reconnaissance and weather research plane. Later, Sierracin advanced the technology for other applications, among them the cockpit windows of the NASA X-15 supersonic research vehicle and the helmet faceplates of Apollo astronauts. Adapting the technology to hospital needs, Sierracin teamed with Cavitron Corporation, Anaheim, California, which produces the cradle warmer and two other systems employing Sierracin's electrically-heated transparencies. Working to combat the infant mortality rate, hospitals are continually upgrading delivery room and nursery care techniques. Many have special procedures and equipment to protect infants during the "period of apprehension," the critical six to 12 hours after delivery. One such item of equipment is an aerospace spinoff called the Infant Radiant Warmer, a "golden canopy" which provides uniform, controlled warmth to the infant's cradle. Warmth is vitally important to all newborns, particularly premature babies; they lose heat more rapidly than adults because they have greater surface area in comparison with body mass.

Local and Remote Cooperation With Virtual and Robotic Agents: A P300 BCI Study in Healthy and People Living With Spinal Cord Injury.

PubMed

Tidoni, Emmanuele; Abu-Alqumsan, Mohammad; Leonardis, Daniele; Kapeller, Christoph; Fusco, Gabriele; Guger, Cristoph; Hintermuller, Cristoph; Peer, Angelika; Frisoli, Antonio; Tecchia, Franco; Bergamasco, Massimo; Aglioti, Salvatore Maria

2017-09-01

The development of technological applications that allow people to control and embody external devices within social interaction settings represents a major goal for current and future brain-computer interface (BCI) systems. Prior research has suggested that embodied systems may ameliorate BCI end-user's experience and accuracy in controlling external devices. Along these lines, we developed an immersive P300-based BCI application with a head-mounted display for virtual-local and robotic-remote social interactions and explored in a group of healthy participants the role of proprioceptive feedback in the control of a virtual surrogate (Study 1). Moreover, we compared the performance of a small group of people with spinal cord injury (SCI) to a control group of healthy subjects during virtual and robotic social interactions (Study 2), where both groups received a proprioceptive stimulation. Our attempt to combine immersive environments, BCI technologies and neuroscience of body ownership suggests that providing realistic multisensory feedback still represents a challenge. Results have shown that healthy and people living with SCI used the BCI within the immersive scenarios with good levels of performance (as indexed by task accuracy, optimizations calls and Information Transfer Rate) and perceived control of the surrogates. Proprioceptive feedback did not contribute to alter performance measures and body ownership sensations. Further studies are necessary to test whether sensorimotor experience represents an opportunity to improve the use of future embodied BCI applications.

"I wz wondering-uhm could 'Raid' uhm 'e'ffect the brain permanently d'y know?": Some Observations on the Intersection of Speaking and Writing in Calls to a Poison Control Center.

ERIC Educational Resources Information Center

Frankel, Richard M.

1989-01-01

Focuses on how written records are created during calls to a Poison Control Center. Describes the relationship between writing and speaking in this bureaucratic context. Finds that keeping written records extends the length of call processing time, representing a barrier to handling new calls promptly. (MS)

A compact 500 MHz 4 kW Solid-State Power Amplifier for accelerator applications

NASA Astrophysics Data System (ADS)

Gaspar, M.; Pedrozzi, M.; Ferreira, L. F. R.; Garvey, T.

2011-05-01

We present the development of a compact narrow-band Solid-State Power Amplifier (SSPA). We foresee a promising application of solid-state amplifiers specifically in accelerators for new generation synchrotron light sources. Such a new technology has reached a competitive price/performance ratio and expected lifetime in comparison with klystron and IOT amplifiers. The increasing number of synchrotron light sources using 500 MHz as base frequency justifies the effort in the development of the proposed amplifier. Two different techniques are also proposed to improve the control and performance of these new distributed amplification systems which we call, respectively, complete distributed system and forced compression.