Dust control technology usage patterns in the drywall finishing industry.

PubMed

Young-Corbett, Deborah E; Nussbaum, Maury A

2009-06-01

A telephone survey was conducted to quantify drywall finishing industry usage rates of dust control technology, identify barriers to technology adoption, and explore firm owner perception of risk. Industry use of the following technologies was described: wet methods, respiratory protection, pole sanders, ventilated sanders, and low-dust joint compound. A survey instrument composed of both Likert-type scaled items and open-ended items was developed and administered by telephone to the census population of the owners of member firms of trade associations: Finishing Contractors Association and Association of the Wall and Ceiling Industries. Of 857 firms, 264 interviews were completed. Along with descriptive statistics, results were analyzed to examine effects of firm size and union affiliation on responses. Responses to open-ended items were analyzed using content analysis procedures. Firm owners rated the risk of dust to productivity and customer satisfaction as low-moderate. Half rated the dust as having some impact on worker health, with higher impacts indicated by owners of small firms. Among the available control technologies, respiratory protection was used most frequently. Several barriers to implementation of the more effective control technologies were identified. Barriers associated with technology usability, productivity, and cost, as well as misperceptions of risk, should be addressed to improve dust control in the drywall finishing industry.

A study of mass data storage technology for rocket engine data

NASA Technical Reports Server (NTRS)

Ready, John F.; Benser, Earl T.; Fritz, Bernard S.; Nelson, Scott A.; Stauffer, Donald R.; Volna, William M.

1990-01-01

The results of a nine month study program on mass data storage technology for rocket engine (especially the Space Shuttle Main Engine) health monitoring and control are summarized. The program had the objective of recommending a candidate mass data storage technology development for rocket engine health monitoring and control and of formulating a project plan and specification for that technology development. The work was divided into three major technical tasks: (1) development of requirements; (2) survey of mass data storage technologies; and (3) definition of a project plan and specification for technology development. The first of these tasks reviewed current data storage technology and developed a prioritized set of requirements for the health monitoring and control applications. The second task included a survey of state-of-the-art and newly developing technologies and a matrix-based ranking of the technologies. It culminated in a recommendation of optical disk technology as the best candidate for technology development. The final task defined a proof-of-concept demonstration, including tasks required to develop, test, analyze, and demonstrate the technology advancement, plus an estimate of the level of effort required. The recommended demonstration emphasizes development of an optical disk system which incorporates an order-of-magnitude increase in writing speed above the current state of the art.

Toyota drivers' experiences with Dynamic Radar Cruise Control, Pre-Collision System, and Lane-Keeping Assist.

PubMed

Eichelberger, Angela H; McCartt, Anne T

2016-02-01

Advanced crash avoidance and driver assistance technologies potentially can prevent or mitigate many crashes. Previous surveys with drivers have found favorable opinions for many advanced technologies; however, these surveys are not necessarily representative of all drivers or all systems. As the technologies spread throughout the vehicle fleet, it is important to continue studying driver acceptance and use of them. This study focused on 2010-2013 Toyota Sienna and Prius models that were equipped with adaptive cruise control, forward collision avoidance, and lane departure warning and prevention (Prius models only). Telephone interviews were conducted in summer 2013 with 183 owners of vehicles with these technologies. About 9 in 10 respondents wanted adaptive cruise control and forward collision avoidance on their next vehicle, and 71% wanted lane departure warning/prevention again. Males and females reported some differences in their experiences with the systems; for example, males were more likely to have turned on lane departure warning/prevention than females, and when using this system, males reported more frequent warnings than did females. Relative to older drivers, drivers age 40 and younger were more likely to have seen or heard a forward collision warning. Consistent with the results in previous surveys of owners of luxury vehicles, the present survey found that driver acceptance of the technologies was high, although less so for lane departure warning/prevention. Experiences with the Toyota systems differed by driver age and gender to a greater degree than in previous surveys, suggesting that the responses of drivers may begin to differ as crash avoidance technology becomes available on a wider variety of vehicles. Crash avoidance technologies potentially can prevent or mitigate many crashes, but their success depends in part on driver acceptance. These systems will be effective only to the extent that drivers use them. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

75 FR 9277 - Proposed Information Collection (Nation-Wide Customer Satisfaction Surveys) Activity: Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0712] Proposed Information Collection (Nation-Wide Customer Satisfaction Surveys) Activity: Comment Request AGENCY: Veterans Health Administration... use of other forms of information technology. Title: Nation-wide Customer Satisfaction Surveys, VA...

A Survey of Intelligent Control and Health Management Technologies for Aircraft Propulsion Systems

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Simon, Donald L.; Garg, Sanjay; Guo, Ten-Heui; Mercer, Carolyn; Behbahani, Alireza; Bajwa, Anupa; Jensen, Daniel T.

2005-01-01

Intelligent Control and Health Management technology for aircraft propulsion systems is much more developed in the laboratory than in practice. With a renewed emphasis on reducing engine life cycle costs, improving fuel efficiency, increasing durability and life, etc., driven by various government programs, there is a strong push to move these technologies out of the laboratory and onto the engine. This paper describes the existing state of engine control and on-board health management, and surveys some specific technologies under development that will enable an aircraft propulsion system to operate in an intelligent way--defined as self-diagnostic, self-prognostic, self-optimizing, and mission adaptable. These technologies offer the potential for creating extremely safe, highly reliable systems. The technologies will help to enable a level of performance that far exceeds that of today s propulsion systems in terms of reduction of harmful emissions, maximization of fuel efficiency, and minimization of noise, while improving system affordability and safety. Technologies that are discussed include various aspects of propulsion control, diagnostics, prognostics, and their integration. The paper focuses on the improvements that can be achieved through innovative software and algorithms. It concentrates on those areas that do not require significant advances in sensors and actuators to make them achievable, while acknowledging the additional benefit that can be realized when those technologies become available. The paper also discusses issues associated with the introduction of some of the technologies.

AUV technology heads for new depths[Autonomous Underwater Vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, D.

2000-04-01

High-tech unmanned submarine technologies initially developed by the US Navy are being adapted for a new role to assist the oil and gas industry's shift into deeper waters. To address the problem of costly data acquisition and inaccurate survey data, C and C Technologies of Lafayette, La., has hired Kongsberg Simrad to construct the Hugin 3000 deepwater autonomous underwater vehicle (AUV). As the technology is applied to energy exploration and production advances to meet the deepwater challenges beyond the continental shelf, AUVs will be increasingly employed, it is believed. The paper describes the Hugin project, unexpected situations, the vehicle positionmore » tracking system, vehicle operation and real-time data quality control, real-time data monitoring and control, Hugin field experience, and pipe route surveying.« less

77 FR 56710 - Proposed Information Collection (Call Center Satisfaction Survey): Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0744] Proposed Information Collection (Call Center Satisfaction Survey): Comment Request AGENCY: Veterans Benefits Administration, Department of... techniques or the use of other forms of information technology. Title: VBA Call Center Satisfaction Survey...

75 FR 39541 - Agency Information Collection Activities; Proposed Collection; Comment Request; “The Dairy...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

...'s Role in Residue Avoidance Survey'' AGENCY: Food and Drug Administration, HHS. ACTION: Notice... solicits comments on FDA's ``The Dairy Practitioner's Role in Residue Avoidance Survey.'' DATES: Submit... of information technology. ``The Dairy Practitioner's Role in Residue Avoidance Survey'' (OMB Control...

75 FR 9279 - Proposed Information Collection (Survey of Satisfaction With the Disability Evaluation System...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-New (DES)] Proposed Information Collection (Survey of Satisfaction With the Disability Evaluation System (DES)) Activity: Comment Request AGENCY... use of other forms of information technology. Title: Survey of Satisfaction with the Disability...

75 FR 62636 - Proposed Information Collection (Veterans Health Benefits Handbook Satisfaction Survey) Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-New (VA Form 10-0507)] Proposed Information Collection (Veterans Health Benefits Handbook Satisfaction Survey) Activity: Comment Request AGENCY: Veterans... information technology. Title: Veterans Health Benefits Handbook Satisfaction Survey, VA Form 10-0507. OMB...

Motion control of multi-actuator hydraulic systems for mobile machineries: Recent advancements and future trends

NASA Astrophysics Data System (ADS)

Xu, Bing; Cheng, Min

2018-06-01

This paper presents a survey of recent advancements and upcoming trends in motion control technologies employed in designing multi-actuator hydraulic systems for mobile machineries. Hydraulic systems have been extensively used in mobile machineries due to their superior power density and robustness. However, motion control technologies of multi-actuator hydraulic systems have faced increasing challenges due to stringent emission regulations. In this study, an overview of the evolution of existing throttling control technologies is presented, including open-center and load sensing controls. Recent advancements in energy-saving hydraulic technologies, such as individual metering, displacement, and hybrid controls, are briefly summarized. The impact of energy-saving hydraulic technologies on dynamic performance and control solutions are also discussed. Then, the advanced operation methods of multi-actuator mobile machineries are reviewed, including coordinated and haptic controls. Finally, challenges and opportunities of advanced motion control technologies are presented by providing an overall consideration of energy efficiency, controllability, cost, reliability, and other aspects.

Techniques Use by Science, Technology and Mathematics (STM) Teachers for Controlling Undesirable Classroom Behaviours in Anambra State Secondary Schools

ERIC Educational Resources Information Center

Chinelo, Okigbo Ebele; Nwanneka, Okoli Josephine

2016-01-01

This study investigated the techniques used by secondary school Science Technology and Mathematics (STM) teachers in controlling undesirable behaviours in their classrooms. It adopted descriptive survey design in which 178 Anambra State teachers teaching STM subjects in senior secondary were involved in the research. Two sections of questionnaire…

Potential of Diesel Engine, Emission Technology

DOT National Transportation Integrated Search

1980-03-01

This report surveys diesel engine emission technologies applicable to passenger cars and light trucks. The general design and operating features are presented and discussed. Current and state-of-the-art concepts are reviewed with the focus on control...

Clutter Identification Using Electromagnetic Survey Data

DTIC Science & Technology

2013-07-01

for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2013 2 . REPORT... 2 2.0 Technology... 2 2.1 Technology Description .................................................................................................. 2 2.2

A Brief Survey of Media Access Control, Data Link Layer, and Protocol Technologies for Lunar Surface Communications

NASA Technical Reports Server (NTRS)

Wallett, Thomas M.

2009-01-01

This paper surveys and describes some of the existing media access control and data link layer technologies for possible application in lunar surface communications and the advanced wideband Direct Sequence Code Division Multiple Access (DSCDMA) conceptual systems utilizing phased-array technology that will evolve in the next decade. Time Domain Multiple Access (TDMA) and Code Division Multiple Access (CDMA) are standard Media Access Control (MAC) techniques that can be incorporated into lunar surface communications architectures. Another novel hybrid technique that is recently being developed for use with smart antenna technology combines the advantages of CDMA with those of TDMA. The relatively new and sundry wireless LAN data link layer protocols that are continually under development offer distinct advantages for lunar surface applications over the legacy protocols which are not wireless. Also several communication transport and routing protocols can be chosen with characteristics commensurate with smart antenna systems to provide spacecraft communications for links exhibiting high capacity on the surface of the Moon. The proper choices depend on the specific communication requirements.

Emerging Technologies in the Workplace.

ERIC Educational Resources Information Center

Ammon, Adelaide; Robertson, Lyle

1985-01-01

Presents survey responses of 100 Michigan firms regarding the use of advanced technologies, employment growth projections in skilled occupations, and views about community college education. Examines the impact of the introduction of office automation, telecommunications, computer-aided design, laser, quality control, materials management, and…

BIOMONITORING TO ACHIEVE CONTROL OF TOXIC EFFLUENTS

EPA Science Inventory

This 48 - page Technology Transfer Report provides a case study of how water quality-based toxicity control procedures can be combined with chemical analyses and biological stream surveys to achieve more effective water pollution control. t describes how regulatory agencies used ...

77 FR 2349 - Proposed Information Collection (Nation-wide Customer Satisfaction Surveys) Activity: Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-17

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0712] Proposed Information Collection (Nation-wide Customer Satisfaction Surveys) Activity: Comment Request AGENCY: Veterans Health Administration... techniques or the use of other forms of information technology. Title: Nation-wide Customer Satisfaction...

NASA Extreme Environments Mission Operations 10 - Evaluation of Robotic and Sensor Technologies for Surgery in Extreme Environments

DTIC Science & Technology

2006-11-01

ExPOC), LinkQUest, and working w/ ExPOC, go to the known locations identified in the site survey exercise. 1. Does the direction a diver is...map/ survey an area MD-5 7 April 06 08:30 & 14:20 hrs MD-9 08:15 Prior to EVA surface exploration, robotic rovers could potentially identify...What ROV tasks can be controlled from the ground and what have to be controlled from w/in the habitat SITE SURVEY ROV Objectives (all on

Advanced optical sensing and processing technologies for the distributed control of large flexible spacecraft

NASA Technical Reports Server (NTRS)

Williams, G. M.; Fraser, J. C.

1991-01-01

The objective was to examine state-of-the-art optical sensing and processing technology applied to control the motion of flexible spacecraft. Proposed large flexible space systems, such an optical telescopes and antennas, will require control over vast surfaces. Most likely distributed control will be necessary involving many sensors to accurately measure the surface. A similarly large number of actuators must act upon the system. The used technical approach included reviewing proposed NASA missions to assess system needs and requirements. A candidate mission was chosen as a baseline study spacecraft for comparison of conventional and optical control components. Control system requirements of the baseline system were used for designing both a control system containing current off-the-shelf components and a system utilizing electro-optical devices for sensing and processing. State-of-the-art surveys of conventional sensor, actuator, and processor technologies were performed. A technology development plan is presented that presents a logical, effective way to develop and integrate advancing technologies.

Volvo drivers' experiences with advanced crash avoidance and related technologies.

PubMed

Eichelberger, Angela H; McCartt, Anne T

2014-01-01

Crash avoidance technologies can potentially prevent or mitigate many crashes, but their success depends in part on driver acceptance. Owners of 2010-2012 model Volvo vehicles with several technologies were interviewed about their experiences. Interviews were conducted in summer 2012 with 155 owners of vehicles with City Safety as a standard feature; 145 owners with an optional technology package that included adaptive cruise control, distance alert, collision warning with full auto brake (and pedestrian detection on certain models), driver alert control, and lane departure warning; and 172 owners with both City Safety and the technology package. The survey response rates were 21 percent for owners with City Safety, 30 percent for owners with the technology package, and 27 percent for owners with both. Ten percent of owners opted out before the telephone survey began, and 18 percent declined to participate when called. Despite some annoyance, most respondents always leave the systems on, although fewer do so for lane departure warning (59%). For each of the systems, at least 80 percent of respondents with the system would want it on their next vehicle. Many respondents reported safer driving habits with the systems (e.g., following less closely with adaptive cruise control, using turn signals more often with lane departure warning). Fewer respondents reported potentially unsafe behavior, such as allowing the vehicle to brake for them at least some of the time. About one third of respondents experienced autonomous braking when they believed they were at risk of crashing, and about one fifth of respondents thought it had prevented a crash. About one fifth of respondents with the technology package reported that they were confused or misunderstood which safety system had activated in their vehicle. Consistent with the results for early adopters in the previous survey of Volvo and Infiniti owners, the present survey found that driver acceptance of the technologies remains high, although less so for lane departure warning. This study is the first to report drivers' experiences with City Safety, a collision avoidance system provided as standard equipment on certain Volvo 2010-2012 models, and driver acceptance of this system was high, although not to the same extent as the optional forward collision avoidance system. Future research should continue to monitor drivers' experiences with these technologies as they become available in more vehicles.

76 FR 70827 - Proposed Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Proposed Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey Card) Activity; Comment Request AGENCY... information technology. Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey Card, VA...

Airborne Laser/GPS Mapping of Assateague National Seashore Beach

NASA Technical Reports Server (NTRS)

Kradill, W. B.; Wright, C. W.; Brock, John C.; Swift, R. N.; Frederick, E. B.; Manizade, S. S.; Yungel, J. K.; Martin, C. F.; Sonntag, J. G.; Duffy, Mark;

Operational efficiency subpanel advanced mission control

NASA Technical Reports Server (NTRS)

Friedland, Peter

1990-01-01

Herein, the term mission control will be taken quite broadly to include both ground and space based operations as well as the information infrastructure necessary to support such operations. Three major technology areas related to advanced mission control are examined: (1) Intelligent Assistance for Ground-Based Mission Controllers and Space-Based Crews; (2) Autonomous Onboard Monitoring, Control and Fault Detection Isolation and Reconfiguration; and (3) Dynamic Corporate Memory Acquired, Maintained, and Utilized During the Entire Vehicle Life Cycle. The current state of the art space operations are surveyed both within NASA and externally for each of the three technology areas and major objectives are discussed from a user point of view for technology development. Ongoing NASA and other governmental programs are described. An analysis of major research issues and current holes in the program are provided. Several recommendations are presented for enhancing the technology development and insertion process to create advanced mission control environments.

UAVs Being Used for Environmental Surveying

ScienceCinema

Chung, Sandra

2017-12-09

UAVs, are much more sophisticated than your typical remote-controlled plane. INL robotics and remote sensing experts have added state-of-the-art imaging and wireless technology to the UAVs to create intelligent remote surveillance craft that can rapidly survey a wide area for damage and track down security threats.

MICROARRAY QUALITY CONTROL PROJECT: A COMPREHENSIVE GENE EXPRESSION TECHNOLOGY SURVEY DEMONSTRATES MEASURABLE CONSISTENCY AND CONCORDANT RESULTS BETWEEN PLATFORMS

EPA Science Inventory

Over the last decade, the introduction of microarray technology has had a profound impact on gene expression research. The publication of studies with dissimilar or altogether contradictory results, obtained using different microarray platforms to analyze identical RNA samples, h...

Potential Means of Cost Reduction in Grade Crossing Motorist-Warning Control Equipment : Volume 1. Overview, Technology Survey and Relay Alternatives

DOT National Transportation Integrated Search

1977-12-01

The results of a recent study of railroad-highway grade crossing warning system technology are presented. Emphasis in the investigation was placed on the determination of the potential for significant reduction in equipment, installation and maintena...

News focus: Report on state and local air toxics regulatory strategies published by STAPPA/ALAPCO (State and Territorial Air Pollution Program Administrators/Association of Local Air Pollution Control Officials)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-12-01

The report is entitled Toxic Air Pollutants: State and Local Regulatory Strategies - 1989. The 364-page report is the result of a survey of state and local air pollution control agencies, which solicited information on their programs to control air toxics. According to the survey, every state currently has a program to address emissions of air toxics. Additionally, 27 of the 40 local agencies that responded to the survey have, or are developing, air toxics programs. The strategies employed by state and local agencies vary widely, including control technology requirements, risk assessment, acceptable ambient guidelines, or a combination of thesemore » approaches. This is a report summarizing the air toxics control programs currently implemented (or under development) by state and local air pollution control agencies throughout the US. The report is based upon a survey of all 50 states and 220 local air pollution control agencies conducted by the State and Territorial Air Pollution Program Administrators (STAPPA) and the Association of Local Air Pollution Control Officials (ALAPCO). This survey updates one published five years earlier.« less

Control technology assessment of hazardous waste disposal operations in chemicals manufacturing: walk-through survey report of E. I. Du Pont de Nemours and Company, Chambers Works, Deepwater, New Jersey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anastas, M.

1984-01-01

A walk through survey was conducted to assess control technology for hazardous wastes disposal operations at du Pont de Nemours and Company (SIC-2800), Deepwater, New Jersey in November 1981. Hazardous wastes generated at the facility were disposed of by incineration, wastewater and thermal treatment, and landfilling. Engineering controls for the incineration process and at the landfill were noted. At the landfill, water from a tank trailer was sprayed periodically to suppress dust generation. Vapor control devices, such as spot scrubbers, were used during transfer of organic wastes from trailers and drums to storage prior to incineration. Wastes were also recirculatedmore » to prevent build up of grit in the strainers. The company conducted area monitoring for nitrobenzene (98953) and amines at the landfill and personal monitoring for chloramines at the incinerator. Half mask dust respirators were worn by landfill operators. Operators who unloaded and emptied drums at the incinerator were required to wear face masks, rubber gloves, and boots. The author concludes that disposal of hazardous wastes at the facility is state of the art. An in depth survey is recommended.« less

The effects of collaborative video production on the attitudes and science knowledge of sixth graders

NASA Astrophysics Data System (ADS)

Gaston, Joseph Pickett

This quantitative study examined the effects of collaborative video production (CVP) on the attitudes and conceptual understanding of sixth-grade science students at a public middle school in the Southeastern United States. This study followed the nonequivalent control group design, as described by Campbell and Stanley (1963). The study involved four classes of sixth-grade students. The two control classes were taught the science concept by the cooperating teacher through direct instruction, and the two experimental classes learned the science concept through the CVP project. Pre- and posttests were administered to all students, as well as two pre- and post-surveys measuring student attitudes towards science and technology. Analysis of covariance (ANCOVA) with the pretest scores as the covariate (Xc) was conducted with the posttest and post-survey data to determine if a significant difference existed in scores between the two groups. In each case, no significant difference was found. The results of this study suggest that CVP was as effective at conveying conceptual understanding to sixth-grade science students as direct instruction. Although not significant, the study also showed that mean scores of students' attitudes towards science and technology increased from pre-surveys to post-surveys for those who participated in the CVP activity. These findings suggest that the treatment contributed to an increase in participants' attitudes and towards technology and the academic subject. No such increase in mean post-survey scores existed for students receiving direct instruction.

Space station thermal control surfaces. Volume 1: Interim report

NASA Technical Reports Server (NTRS)

Maag, C. R.; Millard, J. M.

1978-01-01

The U.S. space program goals for long-duration manned missions place particular demands on thermal-control systems. The objective of this program is to develop plans which are based on the present thermal-control technology, and which will keep pace with the other space program elements. The program tasks are as follows: (1) requirements analysis, with the objectives to define the thermal-control-surface requirements for both space station and 25 kW power module, to analyze the missions, and to determine the thermal-control-surface technology needed to satisfy both sets of requirements; (2) technology assessment, with the objectives to perform a literature/industry survey on thermal-control surfaces, to compare current technology with the requirements developed in the first task, and to determine what technology advancements are required for both the space station and the 25 kW power module; and (3) program planning that defines new initiative and/or program augmentation for development and testing areas required to provide the proper environment control for the space station and the 25 kW power module.

Control-Structure-Interaction (CSI) technologies and trends to future NASA missions

NASA Technical Reports Server (NTRS)

1990-01-01

Control-structure-interaction (CSI) issues which are relevant for future NASA missions are reviewed. This goal was achieved by: (1) reviewing large space structures (LSS) technologies to provide a background and survey of the current state of the art (SOA); (2) analytically studying a focus mission to identify opportunities where CSI technology may be applied to enhance or enable future NASA spacecraft; and (3) expanding a portion of the focus mission, the large antenna, to provide in-depth trade studies, scaling laws, and methodologies which may be applied to other NASA missions. Several sections are presented. Section 1 defines CSI issues and presents an overview of the relevant modeling and control issues for LLS. Section 2 presents the results of the three phases of the CSI study. Section 2.1 gives the results of a CSI study conducted with the Geostationary Platform (Geoplat) as the focus mission. Section 2.2 contains an overview of the CSI control design methodology available in the technical community. Included is a survey of the CSI ground-based experiments which were conducted to verify theoretical performance predictions. Section 2.3 presents and demonstrates a new CSI scaling law methodology for assessing potential CSI with large antenna systems.

User Acceptability of Physiological and Other Measures of Hazardous States of Awareness

NASA Technical Reports Server (NTRS)

Dickinson, Terry L.; Milkulka, Peter J.; Kwan, Doris; Fitzgibbons, Amy A.; Jinadu, Florence R.; Freeman, Frederick G.; Scerbo, Mark W.; Pope, A. T. (Technical Monitor)

2001-01-01

Two studies explored user acceptance of devices that measure hazardous states of awareness. In the first study, critical incident data were collected in two workshops from 11 operators working as air traffic controllers or commercial pilots. These critical incident data were used to develop a survey of the acceptability of awareness measures. In the second study, the survey was administered to 100 people also working as air traffic controllers or commercial pilots. Results show that operators are open to the inclusion of technology to measure HSAs even if that technology is somewhat invasive as long as feedback about the HSAs is considered to be useful and helpful. Nonetheless, a major concern is the legal complications associated with being recorded, particularly for older and more experienced operators. Air traffic controllers emphasized the importance of sharing technology information with supervisors in order to receive backup or assistance under conditions of task overload, whereas pilots emphasized the influence of work schedules on problems with awareness. Recommendations are offered concerning the implementation of devices to measure hazardous states of awareness.

Potential of Diesel Engine, Diesel Engine Design Concepts, Control Strategy and Implementation

DOT National Transportation Integrated Search

1980-03-01

Diesel engine design concepts and control system strategies are surveyed with application to passenger cars and light trucks. The objective of the study is to indicate the fuel economy potential of the technologies investigated. The engine design par...

The attitudes of science policy, environmental, and utility leaders on US energy issues and fusion

NASA Astrophysics Data System (ADS)

Miller, J. D.

1986-11-01

One example of basic and applied research at LLNL that has produced major, highly visible scientific and engineering advances has been the research related to controlled fusion energy. Continuing experimentation at LLNL and elsewhere is likely to demonstrate that fusion is a viable, inexhaustible alternative source of energy. Having conducted major fusion energy experiments for over 30 years at LLNL, it scientists and engineers recognized the enormous challenges that lay ahead in this important endeavor. To be successful, it was clear that collaborative efforts with universities, private industry, and other national laboratories would need to be greatly expanded. Along with invention and scientific discovery would come the challenge of transferring the myriad of new technologies from the laboratories to the private sector for commercialization of the fusion energy process and the application of related technologies to yet unimagined new industries and products. Therefore, using fusion energy research as the focus, the Laboratory's Technology Transfer Initiatives Program contracted with the Public Opinion Laboratory to conduct a survey designed to promote a better understanding of effective technology transfer. As one of the recognized authorities on scientific surveys, Dr. Jon Miller of the POL worked with Laboratory scientists to understand the objectives of the survey. He then formulated the questions, designed the survey, and derived his survey sample from a qualified list developed at the POL, which has formed the basis for other survey panels. This report, prepared by Dr. Miller, describes the basis and methodology of this survey process and then presents the survey findings and some conclusions.

Survey of Applications of Active Control Technology for Gust Alleviation and New Challenges for Lighter-weight Aircraft

NASA Technical Reports Server (NTRS)

Regan, Christopher D.; Jutte, Christine V.

2012-01-01

This report provides a historical survey and assessment of the state of the art in the modeling and application of active control to aircraft encountering atmospheric disturbances in flight. Particular emphasis is placed on applications of active control technologies that enable weight reduction in aircraft by mitigating the effects of atmospheric disturbances. Based on what has been learned to date, recommendations are made for addressing gust alleviation on as the trend for more structurally efficient aircraft yields both lighter and more flexible aircraft. These lighter more flexible aircraft face two significant challenges reduced separation between rigid body and flexible modes, and increased sensitivity to gust encounters due to increased wing loading and improved lift to drag ratios. The primary audience of this paper is engineering professionals new to the area of gust load alleviation and interested in tackling the multifaceted challenges that lie ahead for lighter-weight aircraft.

Middeck Active Control Experiment (MACE), phase A

NASA Technical Reports Server (NTRS)

Crawley, Edward F.; Deluis, Javier; Miller, David W.

1989-01-01

A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed.

The future of the provision process for mobility assistive technology: a survey of providers.

PubMed

Dicianno, Brad E; Joseph, James; Eckstein, Stacy; Zigler, Christina K; Quinby, Eleanor J; Schmeler, Mark R; Schein, Richard M; Pearlman, Jon; Cooper, Rory A

2018-03-20

The purpose of this study was to evaluate the opinions of providers of mobility assistive technologies to help inform a research agenda and set priorities. This survey study was anonymous and gathered opinions of individuals who participate in the process to provide wheelchairs and other assistive technologies to clients. Participants were asked to rank the importance of developing various technologies and rank items against each other in terms of order of importance. Participants were also asked to respond to several open-ended questions or statements. A total of 161 providers from 35 states within the USA consented to participation and completed the survey. This survey revealed themes of advanced wheelchair design, assistive robotics and intelligent systems, human machine interfaces and smart device applications. It also outlined priorities for researchers to provide continuing education to clients and providers. These themes will be used to develop research and development priorities. Implications for Rehabilitation • Research in advanced wheelchair design is needed to facilitate travel and environmental access with wheelchairs and to develop alternative power sources for wheelchairs.• New assistive robotics and intelligent systems are needed to help wheelchairs overcome obstacles or self-adjust, assist wheelchair navigation in the community, assist caregivers and transfers, and aid ambulation.• Innovations in human machine interfaces may help advance the control of mobility devices and robots with the brain, eye movements, facial gesture recognition or other systems.• Development of new smart devices is needed for better control of the environment, monitoring activity and promoting healthy behaviours.

A cross-sectional investigation of acceptance of health information technology: A nationwide survey of community pharmacists in Turkey.

PubMed

Sezgin, Emre; Özkan-Yıldırım, Sevgi

Health information technologies have become vital to health care services. In that regard, successful use of information technologies in pharmaceutical services is important to manage, control and maintain pharmaceutical transactions, which increase the quality of health care delivery. This study aimed to identify influencing factors on pharmacists' acceptance of pharmaceutical service systems. A cross-sectional study was conducted employing a research model based on technology acceptance theories. A parsimonious model was developed, and a self-reported questionnaire was distributed online. Community pharmacists participated voluntarily via the website of Turkish Pharmacists' Association. The data was analyzed employing Structural Equation Modeling. From 77 out of 81 cities of Turkey, 2169 community pharmacists participated to the survey with 43% response rate. Perceived usefulness, perceived ease of use, system factors and perceived behavioral control explained 47% of total variance in pharmacists' intention to use the pharmaceutical technology. The findings of the research provided insight about relations of influencing factors and practical implications regarding perceived behaviors and system use. Future researchers would benefit from the study design and findings. The study is also valuable for being the first nationwide study conducted on pharmacists about user attitudes toward a technology. Copyright © 2015 Elsevier Inc. All rights reserved.

Photovoltaic battery & charge controller market & applications survey. An evaluation of the photovoltaic system market for 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammond, R.L.; Turpin, J.F.; Corey, G.P.

1996-12-01

Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Battery Analysis and Evaluation Department and the Photovoltaic System Assistance Center of Sandia National Laboratories (SNL) initiated a U.S. industry-wide PV Energy Storage System Survey. Arizona State University (ASU) was contracted by SNL in June 1995 to conduct the survey. The survey included three separate segments tailored to: (a) PV system integrators, (b) battery manufacturers, and (c) PV charge controller manufacturers. The overall purpose of the survey was to: (a) quantify the market for batteries shipped with (or for) PV systems in 1995, (b) quantify the PVmore » market segments by battery type and application for PV batteries, (c) characterize and quantify the charge controllers used in PV systems, (d) characterize the operating environment for energy storage components in PV systems, and (e) estimate the PV battery market for the year 2000. All three segments of the survey were mailed in January 1996. This report discusses the purpose, methodology, results, and conclusions of the survey.« less

Survey of current and emerging technologies for biological contamination control

NASA Astrophysics Data System (ADS)

Frick, Andreas; Mogul, Rakesh

2012-07-01

This study will survey current and emerging technologies for biological contamination control within the context of planetary protection. Using a systems analysis approach, our objective is to compare various implementation variables across tasks ranging from surface cleaning to full-system sterilization for spacecraft and spacecraft components. Methods reviewed include vapor-phase hydrogen peroxide, plasma-phase sterilants such as oxygen and hydrogen peroxide, dry heat, laser-based techniques, supercritical carbon dioxide-based methods, and advanced bio-barriers. These methods will be evaluated in relation to relevant mission architectures and will address aspects of sample return missions. Results from this study, therefore, will offer new insights into the present-day engineering capabilities and future developmental concerns for missions targeting icy satellites, Mars, and other locations of astrochemical and astrobiological significance.

Evaluation of technology-enhanced flagger devices : focus group and survey studies in Kansas.

DOT National Transportation Integrated Search

2009-04-01

Flagger-controlled work zones, by their very nature tend to utilize fewer traffic control measures than other work zones. Often these work zones are in place for only a short duration of time, so adding signing or positive protection beyond the minim...

U.S.A.B.I.L.I.T.Y. Framework for Older Adults.

PubMed

Caboral-Stevens, Meriam; Whetsell, Martha V; Evangelista, Lorraine S; Cypress, Brigitte; Nickitas, Donna

2015-01-01

The purpose of the current study was to present a framework to determine potential usability of health websites by older adults. Review of the literature showed paucity of nursing theory related to the use of technology and usability, particularly in older adults. The Roy Adaptation Model, a widely used nursing theory, was chosen to provide framework for the new model. Technology constructs from the Technology Acceptance Model and United Theory of Acceptance and Use of Technology and behavioral control construct from the Theory of Planned Behavior were integrated into the construction of the derived model. The Use of Technology for Adaptation by Older Adults and/or Those With Limited Literacy (U.S.A.B.I.L.I.T.Y.) Model was constructed from the integration of diverse theoretical/conceptual perspectives. The four determinants of usability in the conceptual model include (a) efficiency, (b) learnability, (c) perceived user experience, and (d) perceived control. Because of the lack of well-validated survey questionnaires to measure these determinants, a U.S.A.B.I.L.I.T.Y. Survey was developed. A panel of experts evaluated face and content validity of the new instrument. Internal consistency of the new instrument was 0.96. Usability is key to accepting technology. The derived U.S.A.B.I.L.I.T.Y. framework could serve as a guide for nurses in formative evaluation of technology. Copyright 2015, SLACK Incorporated.

LDR system concepts and technology

NASA Technical Reports Server (NTRS)

Pittman, B.

1985-01-01

The Large Deployable Reflector is a 20 meter diameter infrared/submillimeter telescope planned for the late 1990's. The Astronomy Survey Committee of the National Academy of Sciences (Field Committee) recommended LDR as one of the two space based observatories that should start development in the 80's. LDR's large aperture will give it unequaled resolution in the wavelength range from 30 to 1000 microns. To meet LDR performance goals will call for advances in several technology disciplines including: optics, controls, thermal control, detectors, cryogenic cooling, and large space structures.

Remote control spill reduction technology : a survey and analysis of applications for liquid pipeline systems

DOT National Transportation Integrated Search

1995-01-01

Given the 1988 directive, the OPS conducted a study on the potential for EFRDs : to minimize the volume of pipeline spills. They concluded that Remote Controlled Valves : (RCVs) and check valves are the only EFRDs that are effective on hazardous liqu...

Control technology for integrated circuit fabrication at Micro-Circuit Engineering, Incorporated, West Palm Beach, Florida

NASA Astrophysics Data System (ADS)

Mihlan, G. I.; Mitchell, R. I.; Smith, R. K.

1984-07-01

A survey to assess control technology for integrated circuit fabrication was conducted. Engineering controls included local and general exhaust ventilation, shielding, and personal protective equipment. Devices or work stations that contained toxic materials that were potentially dangerous were controlled by local exhaust ventilation. Less hazardous areas were controlled by general exhaust ventilation. Process isolation was used in the plasma etching, low pressure chemical vapor deposition, and metallization operations. Shielding was used in ion implantation units to control X-ray emissions, in contact mask alignes to limit ultraviolet (UV) emissions, and in plasma etching units to control radiofrequency and UV emissions. Most operations were automated. Use of personal protective equipment varied by job function.

Remote sensing of channels and riparian zones with a narrow-beam aquatic-terrestrial LIDAR

Treesearch

Jim McKean; Dave Nagel; Daniele Tonina; Philip Bailey; Charles Wayne Wright; Carolyn Bohn; Amar Nayegandhi

2009-01-01

The high-resolution Experimental Advanced Airborne Research LIDAR (EAARL) is a new technology for cross-environment surveys of channels and floodplains. EAARL measurements of basic channel geometry, such as wetted cross-sectional area, are within a few percent of those from control field surveys. The largest channel mapping errors are along stream banks. The LIDAR data...

Computer Science and Technology: A Survey of Eleven Government-Developed Data Element Dictionary/Directory Systems.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Computer Sciences and Technology.

This report presents the current state of the art of government developed Data Element Dictionary/Directory (DED/D) systems. DED/D's are software tools used for managing and controlling information and data. The introduction of the report includes a list of the government agency systems surveyed and a summary matrix presenting each system's…

Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

NASA Technical Reports Server (NTRS)

Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

2010-01-01

Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

Sensor failure detection for jet engines

NASA Technical Reports Server (NTRS)

Merrill, Walter C.

1988-01-01

The use of analytical redundancy to improve gas turbine engine control system reliability through sensor failure detection, isolation, and accommodation is surveyed. Both the theoretical and application papers that form the technology base of turbine engine analytical redundancy research are discussed. Also, several important application efforts are reviewed. An assessment of the state-of-the-art in analytical redundancy technology is given.

Science, Technology and the Nuclear Arms Race

NASA Astrophysics Data System (ADS)

Schroeer, Dietrich

1984-09-01

A comprehensive survey of the nuclear arms race from a technological point of view, which will appeal to the scientist and non-scientist alike. Provides information for the layman on this current topic and is designed for undergraduate courses in political science, history, international studies, as well as physics courses on the subject. Explores the motivation behind the development of various nuclear arms technologies and their deployment and examines the effects these technologies have on military, political and social strategies. Discusses the nature of deterrence and alternatives to it, arms control, and disarmament.

Control technology assessment of hazardous waste disposal operations in chemicals manufacturing: walk-through survey report of Olin Chemicals Group, Charleston, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crandall, M.S.

1983-08-01

A walk through survey was conducted to assess control technology for hazardous wastes disposal operations at Olin Chemicals Group (SIC-2800, SIC-2812, SIC-2819), Charleston, Tennessee in May 1982. Hazardous wastes generated at the facility included brine sludge, thick mercury (7439954) (Hg) butter, and calcium-hypochlorite (7778543). An estimated 8500 tons of waste were disposed of annually. The Hg waste underwent a retorting process that recycled the Hg. The final detoxified waste was land filled. Brine sludge and calcium-hypochlorite were also land filled. No controls beyond those normally used at such sites were found at the landfills. Periodic monitoring of Hg vapor concentrationsmore » was conducted by the company. Medical monitoring of urine for Hg exposure was conducted. Specific limits were set for urinary Hg concentrations. When these limits were exceeded the workers were removed from exposure. Personal protective equipment consisted of hard hats, safety glasses, and spirators specially designed for Hg exposure. The author concludes that the hazardous waste disposal and treatment operations at the facility are well controlled.« less

A survey of current solid state star tracker technology

NASA Astrophysics Data System (ADS)

Armstrong, R. W.; Staley, D. A.

1985-12-01

This paper is a survey of the current state of the art in design of star trackers for spacecraft attitude determination systems. Specific areas discussed are sensor technology, including the current state-of-the-art solid state sensors and techniques of mounting and cooling the sensor, analog image preprocessing electronics performance, and digital processing hardware and software. Three examples of area array solid state star tracker development are presented - ASTROS, developed by the Jet Propulsion Laboratory, the Retroreflector Field Tracker (RFT) by Ball Aerospace, and TRW's MADAN. Finally, a discussion of solid state line arrays explores the possibilities for one-dimensional imagers which offer simplified scan control electronics.

The Development of Micromachined Gyroscope Structure and Circuitry Technology

PubMed Central

Xia, Dunzhu; Yu, Cheng; Kong, Lun

2014-01-01

This review surveys micromachined gyroscope structure and circuitry technology. The principle of micromachined gyroscopes is first introduced. Then, different kinds of MEMS gyroscope structures, materials and fabrication technologies are illustrated. Micromachined gyroscopes are mainly categorized into micromachined vibrating gyroscopes (MVGs), piezoelectric vibrating gyroscopes (PVGs), surface acoustic wave (SAW) gyroscopes, bulk acoustic wave (BAW) gyroscopes, micromachined electrostatically suspended gyroscopes (MESGs), magnetically suspended gyroscopes (MSGs), micro fiber optic gyroscopes (MFOGs), micro fluid gyroscopes (MFGs), micro atom gyroscopes (MAGs), and special micromachined gyroscopes. Next, the control electronics of micromachined gyroscopes are analyzed. The control circuits are categorized into typical circuitry and special circuitry technologies. The typical circuitry technologies include typical analog circuitry and digital circuitry, while the special circuitry consists of sigma delta, mode matching, temperature/quadrature compensation and novel special technologies. Finally, the characteristics of various typical gyroscopes and their development tendency are discussed and investigated in detail. PMID:24424468

Adaptive Critic Nonlinear Robust Control: A Survey.

PubMed

Wang, Ding; He, Haibo; Liu, Derong

2017-10-01

Adaptive dynamic programming (ADP) and reinforcement learning are quite relevant to each other when performing intelligent optimization. They are both regarded as promising methods involving important components of evaluation and improvement, at the background of information technology, such as artificial intelligence, big data, and deep learning. Although great progresses have been achieved and surveyed when addressing nonlinear optimal control problems, the research on robustness of ADP-based control strategies under uncertain environment has not been fully summarized. Hence, this survey reviews the recent main results of adaptive-critic-based robust control design of continuous-time nonlinear systems. The ADP-based nonlinear optimal regulation is reviewed, followed by robust stabilization of nonlinear systems with matched uncertainties, guaranteed cost control design of unmatched plants, and decentralized stabilization of interconnected systems. Additionally, further comprehensive discussions are presented, including event-based robust control design, improvement of the critic learning rule, nonlinear H ∞ control design, and several notes on future perspectives. By applying the ADP-based optimal and robust control methods to a practical power system and an overhead crane plant, two typical examples are provided to verify the effectiveness of theoretical results. Overall, this survey is beneficial to promote the development of adaptive critic control methods with robustness guarantee and the construction of higher level intelligent systems.

Fiber optic control system integration

NASA Technical Reports Server (NTRS)

Poppel, G. L.; Glasheen, W. M.; Russell, J. C.

1987-01-01

A total fiber optic, integrated propulsion/flight control system concept for advanced fighter aircraft is presented. Fiber optic technology pertaining to this system is identified and evaluated for application readiness. A fiber optic sensor vendor survey was completed, and the results are reported. The advantages of centralized/direct architecture are reviewed, and the concept of the protocol branch is explained. Preliminary protocol branch selections are made based on the F-18/F404 application. Concepts for new optical tools are described. Development plans for the optical technology and the described system are included.

Investigating preferences for mosquito-control technologies in Mozambique with latent class analysis.

PubMed

Smith, Rachel A; Barclay, Victoria C; Findeis, Jill L

2011-07-21

It is common practice to seek the opinions of future end-users during the development of innovations. Thus, the aim of this study is to investigate latent classes of users in Mozambique based on their preferences for mosquito-control technology attributes and covariates of these classes, as well as to explore which current technologies meet these preferences. Surveys were administered in five rural villages in Mozambique. The data were analysed with latent class analysis. This study showed that users' preferences for malaria technologies varied, and people could be categorized into four latent classes based on shared preferences. The largest class, constituting almost half of the respondents, would not avoid a mosquito-control technology because of its cost, heat, odour, potential to make other health issues worse, ease of keeping clean, or inadequate mosquito control. The other three groups are characterized by the attributes which would make them avoid a technology; these groups are labelled as the bites class, by-products class, and multiple-concerns class. Statistically significant covariates included literacy, self-efficacy, willingness to try new technologies, and perceived seriousness of malaria for the household. To become widely diffused, best practices suggest that end-users should be included in product development to ensure that preferred attributes or traits are considered. This study demonstrates that end-user preferences can be very different and that one malaria control technology will not satisfy everyone.

FIRST Robotics as a model for experiential problem-based learning: A comparison of student attitudes and interests in science, mathematics, engineering, and technology

NASA Astrophysics Data System (ADS)

Griffith, Donald Sanford, Jr.

2005-07-01

This research study was undertaken to examine potential relationships between high school students' attitudes and interests in science, mathematics, engineering, and technology, and their participation in the FIRST Robotics Competition six-week challenge to design, and build a robot. High school students' gender and race, in relationship to students' interest in the aforementioned topics was also examined in this study. A convenience sample of 727 South Carolina public high school students agreed to participate in the study. Data were collected using pre-and post-survey questionnaires. Student participants completed pre-survey questionnaires at the onset of the 2005 FIRST Robotics Competition Kick-off, concurrent with the beginning of the second semester of the 2004--2005 school year. Participants completed post-survey questionnaires after six-weeks, the period of time allocated for teams to design, build, and ship their 2005 FIRST Robotics Competition robot. Data analyzed was collected from the group of students participating in FIRST Robotics (treatment), the experimental group, and the group of students who are not participating in FIRST Robotics (control). Findings reported that the pre- and post-survey questionnaire responses regarding attitudinal change were not significantly different in either the experimental or control group. High pre-survey dependent variable scores provided by students in the FIRST group did not allow for significant gain in each of the seven-attitudinal categories. Findings also indicated that there were significant attitudinal differences between students in the experimental group (FIRST), and students the control group (SMET) pre- and post-survey responses. Students in the FIRST group had statistically significant higher attitude means than students in the SMET group on both pre- and post-surveys in the seven-attitudinal categories. The frequency for responses to each question in the three interest categories on the pre- and post-survey was calculated for the experimental and control group to evaluate differences. The results expressed in percentages indicated that there were significant differences in respondent scores for the pre-survey versus the post-survey in the FIRST group. The null hypothesis concerning interest differences of high school students that participate in the FIRST Robotics six-week challenge as compared to students that do not participate in the program was rejected.

Manned maneuvering unit technology survey

NASA Technical Reports Server (NTRS)

Cook, G. V. O. (Editor)

1975-01-01

The preliminary design of the manned maneuvering unit (MMU) for the shuttle is investigated, and the current state of the art in certain technology areas that may find application on the operational EVA shuttle MMU is examined. Three broad areas of technology, namely: (1) mechanical energy storage - i.e., the practicality of utilizing the energy storage capability of either a reaction wheel or a control moment gyro, (2) numerical and alphanumerical displays, and (3) recent electronics developments such as microprocessors and integrated injection logic, were covered.

Updated Classrooms for Updated Curriculum.

ERIC Educational Resources Information Center

Phillips, Joanne B.

1986-01-01

Based on an unspecified number of teachers surveyed and onsite visits, agreement exists about some features of optimum facilities for secondary classes in electronic technology. All involved wanted more security, adequate wiring, protection for the equipment, and environmental control. (MLF)

Outline of the survey on the development of earth observation satellites

NASA Technical Reports Server (NTRS)

1977-01-01

An independent earth observation system with land and sea satellites to be developed by Japan is described. Visible and infrared radiometers, microwave radiometers, microwave scattermeters, synthetic aperture radar, and laser sensors are among the instrumentation discussed. Triaxial attitude control, basic technology common to sea and land observation satellites as well as land data analytical technology developed for U.S. LANDSAT data are reviewed.

Force Modeling, Identification, and Feedback Control of Robot-Assisted Needle Insertion: A Survey of the Literature

PubMed Central

Xie, Yu; Liu, Shuang; Sun, Dong

2018-01-01

Robot-assisted surgery is of growing interest in the surgical and engineering communities. The use of robots allows surgery to be performed with precision using smaller instruments and incisions, resulting in shorter healing times. However, using current technology, an operator cannot directly feel the operation because the surgeon-instrument and instrument-tissue interaction force feedbacks are lost during needle insertion. Advancements in force feedback and control not only help reduce tissue deformation and needle deflection but also provide the surgeon with better control over the surgical instruments. The goal of this review is to summarize the key components surrounding the force feedback and control during robot-assisted needle insertion. The literature search was conducted during the middle months of 2017 using mainstream academic search engines with a combination of keywords relevant to the field. In total, 166 articles with valuable contents were analyzed and grouped into five related topics. This survey systemically summarizes the state-of-the-art force control technologies for robot-assisted needle insertion, such as force modeling, measurement, the factors that influence the interaction force, parameter identification, and force control algorithms. All studies show force control is still at its initial stage. The influence factors, needle deflection or planning remain open for investigation in future. PMID:29439539

Force Modeling, Identification, and Feedback Control of Robot-Assisted Needle Insertion: A Survey of the Literature.

PubMed

Yang, Chongjun; Xie, Yu; Liu, Shuang; Sun, Dong

2018-02-12

Robot-assisted surgery is of growing interest in the surgical and engineering communities. The use of robots allows surgery to be performed with precision using smaller instruments and incisions, resulting in shorter healing times. However, using current technology, an operator cannot directly feel the operation because the surgeon-instrument and instrument-tissue interaction force feedbacks are lost during needle insertion. Advancements in force feedback and control not only help reduce tissue deformation and needle deflection but also provide the surgeon with better control over the surgical instruments. The goal of this review is to summarize the key components surrounding the force feedback and control during robot-assisted needle insertion. The literature search was conducted during the middle months of 2017 using mainstream academic search engines with a combination of keywords relevant to the field. In total, 166 articles with valuable contents were analyzed and grouped into five related topics. This survey systemically summarizes the state-of-the-art force control technologies for robot-assisted needle insertion, such as force modeling, measurement, the factors that influence the interaction force, parameter identification, and force control algorithms. All studies show force control is still at its initial stage. The influence factors, needle deflection or planning remain open for investigation in future.

A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

PubMed Central

Kramer, Randall A.; Mboera, Leonard E. G.; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H.; Paul, Christopher J.; Miranda, Marie Lynn

2014-01-01

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials. PMID:24840349

A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

PubMed

Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

2014-05-16

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

A survey of adaptive control technology in robotics

NASA Technical Reports Server (NTRS)

Tosunoglu, S.; Tesar, D.

1987-01-01

Previous work on the adaptive control of robotic systems is reviewed. Although the field is relatively new and does not yet represent a mature discipline, considerable attention has been given to the design of sophisticated robot controllers. Here, adaptive control methods are divided into model reference adaptive systems and self-tuning regulators with further definition of various approaches given in each class. The similarity and distinct features of the designed controllers are delineated and tabulated to enhance comparative review.

Aladin Lite: Lightweight sky atlas for browsers

NASA Astrophysics Data System (ADS)

Boch, Thomas

2014-02-01

Aladin Lite is a lightweight version of the Aladin tool, running in the browser and geared towards simple visualization of a sky region. It allows visualization of image surveys (JPEG multi-resolution HEALPix all-sky surveys) and permits superimposing tabular (VOTable) and footprints (STC-S) data. Aladin Lite is powered by HTML5 canvas technology and is easily embeddable on any web page and can also be controlled through a Javacript API.

Active Noise and Vibration Control Literature Survey: Controller Technologies

DTIC Science & Technology

1999-11-01

5.4 Schematic Flowchart of System Identification [Soderstrom, 1989] ................. 5. 7 Measurement System (open-loop...approaches: measurement systems and transfer functions identification [Norton, 1986]. The following figure illustrates the general flowchart ...data SCI Figure 5.3. Schematic flowchart of system identification [Soderstrom, 1989] 5.7 The first type of identification {see Figure 5.4) uses open

Technology Maturity for the Habitable-zone Exoplanet Imaging Mission (HabEx) Concept

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Warfield, Keith R.; Stahl, H. Philip; Mennesson, Bertrand; Nikzad, Shouleh; nissen, joel; Balasubramanian, Kunjithapatham; Krist, John; Mawet, Dimitri; Stapelfeldt, Karl; warwick, Steve

2018-01-01

HabEx Architecture A is a 4m unobscured telescope optimized for direct imaging and spectroscopy of potentially habitable exoplanets, and also enables a wide range of general astrophysics science. The exoplanet detection and characterization drives the enabling core technologies. A hybrid starlight suppression approach of a starshade and coronagraph diversifies technology maturation risk. In this poster we assess these exoplanet-driven technologies, including elements of coronagraphs, starshades, mirrors, jitter mitigation, wavefront control, and detectors. By utilizing high technology readiness solutions where feasible, and identifying required technology development that can begin early, HabEx will be well positioned for assessment by the community in 2020 Astrophysics Decadal Survey.

NASA technology transfer network communications and information system: TUNS user survey

NASA Technical Reports Server (NTRS)

1992-01-01

Applied Expertise surveyed the users of the deployed Technology Utilization Network System (TUNS) and surveyed prospective new users in order to gather background information for developing the Concept Document of the system that will upgrade and replace TUNS. Survey participants broadly agree that automated mechanisms for acquiring, managing, and disseminating new technology and spinoff benefits information can and should play an important role in meeting NASA technology utilization goals. However, TUNS does not meet this need for most users. The survey describes a number of systematic improvements that will make it easier to use the technology transfer mechanism, and thus expedite the collection and dissemination of technology information. The survey identified 26 suggestions for enhancing the technology transfer system and related processes.

A Study of Students' Learning Styles, Discipline Attitudes and Knowledge Acquisition in Technology-Enhanced Probability and Statistics Education.

PubMed

Christou, Nicolas; Dinov, Ivo D

2010-09-01

Many modern technological advances have direct impact on the format, style and efficacy of delivery and consumption of educational content. For example, various novel communication and information technology tools and resources enable efficient, timely, interactive and graphical demonstrations of diverse scientific concepts. In this manuscript, we report on a meta-study of 3 controlled experiments of using the Statistics Online Computational Resources in probability and statistics courses. Web-accessible SOCR applets, demonstrations, simulations and virtual experiments were used in different courses as treatment and compared to matched control classes utilizing traditional pedagogical approaches. Qualitative and quantitative data we collected for all courses included Felder-Silverman-Soloman index of learning styles, background assessment, pre and post surveys of attitude towards the subject, end-point satisfaction survey, and varieties of quiz, laboratory and test scores. Our findings indicate that students' learning styles and attitudes towards a discipline may be important confounds of their final quantitative performance. The observed positive effects of integrating information technology with established pedagogical techniques may be valid across disciplines within the broader spectrum courses in the science education curriculum. The two critical components of improving science education via blended instruction include instructor training, and development of appropriate activities, simulations and interactive resources.

A Study of Students' Learning Styles, Discipline Attitudes and Knowledge Acquisition in Technology-Enhanced Probability and Statistics Education

PubMed Central

Christou, Nicolas; Dinov, Ivo D.

2011-01-01

Many modern technological advances have direct impact on the format, style and efficacy of delivery and consumption of educational content. For example, various novel communication and information technology tools and resources enable efficient, timely, interactive and graphical demonstrations of diverse scientific concepts. In this manuscript, we report on a meta-study of 3 controlled experiments of using the Statistics Online Computational Resources in probability and statistics courses. Web-accessible SOCR applets, demonstrations, simulations and virtual experiments were used in different courses as treatment and compared to matched control classes utilizing traditional pedagogical approaches. Qualitative and quantitative data we collected for all courses included Felder-Silverman-Soloman index of learning styles, background assessment, pre and post surveys of attitude towards the subject, end-point satisfaction survey, and varieties of quiz, laboratory and test scores. Our findings indicate that students' learning styles and attitudes towards a discipline may be important confounds of their final quantitative performance. The observed positive effects of integrating information technology with established pedagogical techniques may be valid across disciplines within the broader spectrum courses in the science education curriculum. The two critical components of improving science education via blended instruction include instructor training, and development of appropriate activities, simulations and interactive resources. PMID:21603097

Advance of Hazardous Operation Robot and its Application in Special Equipment Accident Rescue

NASA Astrophysics Data System (ADS)

Zeng, Qin-Da; Zhou, Wei; Zheng, Geng-Feng

A survey of hazardous operation robot is given out in this article. Firstly, the latest researches such as nuclear industry robot, fire-fighting robot and explosive-handling robot are shown. Secondly, existing key technologies and their shortcomings are summarized, including moving mechanism, control system, perceptive technology and power technology. Thirdly, the trend of hazardous operation robot is predicted according to current situation. Finally, characteristics and hazards of special equipment accident, as well as feasibility of hazardous operation robot in the area of special equipment accident rescue are analyzed.

Mobile 3D laser scanning technology application in the surveying of urban underground rail transit

NASA Astrophysics Data System (ADS)

Han, Youmei; Yang, Bogang; Zhen, Yinan

2016-11-01

Mobile 3D laser scanning technology is one hot kind of digital earth technology. 3D completion surveying is relative new concept in surveying and mapping. A kind of mobile 3D laser scanning system was developed for the urban underground rail 3D completion surveying. According to the characteristics of underground rail environment and the characters of the mobile laser scanning system, it designed a suitable test scheme to improving the accuracy of this kind of mobile laser scanning system when it worked under no GPS signal environment. Then it completed the application of this technology in the No.15 rail 3D completion surveying. Meanwhile a set of production process was made for the 3D completion surveying based on this kind of mobile 3D laser scanning technology. These products were also proved the efficiency of the new technology in the rail 3D completion surveying. Using mobile 3D laser scanning technology to complete underground rail completion surveying has been the first time in China until now. It can provide a reference for 3D measurement of rail completion surveying or the 3D completion surveying of other areas.

How we used two social media tools to enhance aspects of active learning during lectures.

PubMed

George, Daniel R; Dreibelbis, Tomi D; Aumiller, Betsy

2013-12-01

Medical education is evolving to include active learning approaches, yet some courses will remain lecture-based. Social media tools used by students may foster collaborative learning during lectures. We present preliminary results from a pilot study that integrated two 'social' technologies, Google Docs and SurveyMonkey, into 22 hour-long lectures for a course called "Social Influences on Health" attended by 154 students. At the conclusion of the semester, we reviewed student usage patterns with both technologies and collected data from students via course evaluations that included a standard Likert Scale. We used thematic analysis to identify emergent themes from evaluations. On average, students contributed 6 comments/questions to the Google Doc in each lecture, and 35 students participated in SurveyMonkey. Engagement with both technologies increased throughout the semester and no unprofessional incidents were observed. The mean student rating for integration of Google Docs and SurveyMonkey was 3.4 or "above average" (SD = 1.17). Thematic analysis identified perceived strengths of this approach as well as areas for improvement. Social media such as Google Docs and SurveyMonkey can facilitate interaction and provide students with control over content and flow of lecture-based courses, but educators must be mindful of practical and conceptual limitations.

Rechargeable lithium battery technology - A survey

NASA Technical Reports Server (NTRS)

Halpert, Gerald; Surampudi, Subbarao

1990-01-01

The technology of the rechargeable lithium battery is discussed with special attention given to the types of rechargeable lithium cells and to their expected performance and advantages. Consideration is also given to the organic-electrolyte and polymeric-electrolyte cells and to molten salt lithium cells, as well as to technical issues, such as the cycle life, charge control, rate capability, cell size, and safety. The role of the rechargeable lithium cell in future NASA applications is discussed.

Burnishing Systems: a Short Survey of the State-of-the-art

NASA Astrophysics Data System (ADS)

Bobrovskij, I. N.

2018-01-01

The modern technological solutions allowing to implement a new technology of surface plastic deformation are considered. The technological device allowing to implement the technology of hyper productive surface plastic deformation or wide burnishing (machining time is up to 2-3 revolutions of workpiece) is presented. The device provides the constant force of instruments regardless the beating, non-roundness and other surface shape defects; usable and easily controlled force adjustment; precise installation of instruments and holders toward the along the worpieces axis; automation of the supply and retraction of instruments. Also the device allowing to implement the technology of nanostructuring burnishing is presented. The design of the device allows to eliminate the effect of auto-oscillations.

Comparison of Communication Architectures for Spacecraft Modular Avionics Systems

NASA Technical Reports Server (NTRS)

Gwaltney, D. A.; Briscoe, J. M.

2006-01-01

This document is a survey of publicly available information concerning serial communication architectures used, or proposed to be used, in aeronautic and aerospace applications. It focuses on serial communication architectures that are suitable for low-latency or real-time communication between physically distributed nodes in a system. Candidates for the study have either extensive deployment in the field, or appear to be viable for near-term deployment. Eleven different serial communication architectures are considered, and a brief description of each is given with the salient features summarized in a table in appendix A. This survey is a product of the Propulsion High Impact Avionics Technology (PHIAT) Project at NASA Marshall Space Flight Center (MSFC). PHIAT was originally funded under the Next Generation Launch Technology (NGLT) Program to develop avionics technologies for control of next generation reusable rocket engines. After the announcement of the Space Exploration Initiative, the scope of the project was expanded to include vehicle systems control for human and robotics missions. As such, a section is included presenting the rationale used for selection of a time-triggered architecture for implementation of the avionics demonstration hardware developed by the project team

AIPS technology survey report

NASA Technical Reports Server (NTRS)

Ogletree, Glenn (Editor)

1984-01-01

The results of a technology survey conducted for the NASA/JSC by the CSDL during Phase 1 of the NASA Advanced Information Processing System (AIPS) program at the CSDL are discussed. The purpose of the survey was to ensure that all technology relevant to the configuration, design, development, verification, implementation, and validation of an advanced information processing system, whether existing or under development and soon to be available, would be duly considered in the development of the AIPS. The emphasis in the survey was on technology items which were clearly relevant to the AIPS. Requirements were developed which guided the planning of contacts with the outside sources to be surveyed, and established practical limits on the scope and content of the Technology Survey. Subjects surveyed included architecture, software, hardware, methods for evaluation of reliability and performance, and methods for the verification of the AIPS design and the validation of the AIPS implementation. Survey requirements and survey results in each of these areas are presented, including analyses of the potential effects on the AIPS development process of using or not using the surveyed technology items. Another output of the survey was the identification of technology areas of particular relevance to the AIPS and for which further development, in some cases by the CSDL and in some cases by the NASA, would be fruitful. Appendices are provided in which are presented: (1) reports of some of the actual survey interactions with industrial and other outside information sources; (2) the literature list from the comprehensive literature survey which was conducted; (3) reduced-scale images of an excerpt ('Technology Survey' viewgraphs) from the set of viewgraphs used at the 14 April 1983 Preliminary Requirements Review by the CSDL for the NASA; and (4) reduced-scale images of the set of viewgraphs used in the AIPS Technology Survey Review presentation to the NASA monitors by the CSDL at the NASA Langley Research Center on 28 Sep. 1983.

Survey of Thermoelectric and Solar Technologies as Alternative Energy Solutions

DTIC Science & Technology

2012-02-01

Survey of Thermoelectric and Solar Technologies as Alternative Energy Solutions by Kendall Bianchi, Jay R. Maddux, Kimberly Sablon-Ramsey...Research Laboratory Adelphi, MD 20783-1197 ARL-TR-5920 February 2012 Survey of Thermoelectric and Solar Technologies as Alternative Energy...Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Survey of Thermoelectric and Solar Technologies as Alternative Energy Solutions 5a

Thin film resonator technology.

PubMed

Lakin, Kenneth M

2005-05-01

Advances in wireless systems have placed increased demands on high performance frequency control devices for operation into the microwave range. With spectrum crowding, high bandwidth requirements, miniaturization, and low cost requirements as a background, the thin film resonator technology has evolved into the mainstream of applications. This technology has been under development for over 40 years in one form or another, but it required significant advances in integrated circuit processing to reach microwave frequencies and practical manufacturing for high-volume applications. This paper will survey the development of the thin film resonator technology and describe the core elements that give rise to resonators and filters for today's high performance wireless applications.

76 FR 5328 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

...' Inputs. OMB Control Number: 0518-NEW. Summary of Collection: The Agricultural Research Service's (ARS.... ARS will conduct a farmer survey to collect information needed to streamline the diffusion of new farming systems technology developed by ARS scientists. The authority to collect this information is...

State-of-the-art of turbofan engine noise control

NASA Technical Reports Server (NTRS)

Jones, W. L.; Groeneweg, J. F.

1977-01-01

The technology of turbofan engine noise reduction is surveyed. Specific topics discussed include: (1) new fans for low noise; (2) fan and core noise suppression; (3) turbomachinery noise sources; and (4) a new program for improving static noise testing of fans and engines.

A simplified close range photogrammetric technique for soil erosion assessment

USDA-ARS?s Scientific Manuscript database

Surface reconstruction using digital photogrammetry offers a great advantage for soil erosion research. The technology can be cumbersome for field application as it relies on the accurate measurement of control points often using a survey grade instruments. Also, even though digital photogrammetry h...

Acoustic detection of Melolonthine larvae in Australian sugarcane

USDA-ARS?s Scientific Manuscript database

Decision support systems have been developed for risk analysis and control of root-feeding white grub pests in Queensland sugarcane, based partly on manual inspection of cane soil samples. Acoustic technology was considered as a potential alternative to this laborious procedure. Field surveys were...

A survey of active controls benefits to supersonic transports

NASA Technical Reports Server (NTRS)

Pratt, K. G.

1976-01-01

Results are drawn from studies of the impact of advanced technologies on the design of an arrow-wing configuration. Information presented includes estimated benefits, effects of combinations of active control concepts, and constraints. Emphasis is placed on characteristics that are uniquely related to a large airframe featuring a slender body with a fixed wing of low aspect ratio, high sweep, and small thickness ratio.

Online devices and measuring systems for the automatic control of newspaper printing

NASA Astrophysics Data System (ADS)

Marszalec, Elzbieta A.; Heikkila, Ismo; Juhola, Helene; Lehtonen, Tapio

1999-09-01

The paper reviews the state-of-the-art color measuring systems used for the control of newspaper printing. The printing process requirements are specified and different off-line and on-line color quality control systems, commercially available and under development, are evaluated. Recent market trends in newspaper printing are discussed based on the survey. The study was made on information derived from: conference proceedings (TAGA, IARIGAI, SPIE and IS&T), journals (American Printer, Applied Optics), discussions with experts (GMI, QTI, HONEYWELL, TOBIAS, GretagMacbeth), IFRA Expo'98/Quality Measuring Technologies, commercial brochures, and the Internet. On the background of this review, three different measuring principles, currently, under investigation at VTT Information Technology, are described and their applicability to newspaper printing is evaluated.

Technology development of the Space Transportation System mission and terrestrial applications of satellite technology

NASA Technical Reports Server (NTRS)

1981-01-01

The Space Transportation System (STS) is discussed, including the launch processing system, the thermal protection subsystem, meteorological research, sound supression water system, rotating service structure, improved hypergol or removal systems, fiber optics research, precision positioning, remote controlled solid rocket booster nozzle plugs, ground operations for Centaur orbital transfer vehicle, parachute drying, STS hazardous waste disposal and recycle, toxic waste technology and control concepts, fast analytical densitometry study, shuttle inventory management system, operational intercommunications system improvement, and protective garment ensemble. Terrestrial applications are also covered, including LANDSAT applications to water resources, satellite freeze forecast system, application of ground penetrating radar to soil survey, turtle tracking, evaluating computer drawn ground cover maps, sparkless load pulsar, and coupling a microcomputer and computing integrator with a gas chromatograph.

75 FR 52508 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... conduct the 2010 through 2012 Information and Communication Technology Survey (ICTS). The annual survey... payments) for four types of information and communication technology equipment and software (computers and... through the use of automated collection techniques or other forms of information technology. Comments...

Compressed television transmission: A market survey

NASA Technical Reports Server (NTRS)

Lizak, R. M.; Cagan, L. Q.

1981-01-01

NASA's compressed television transmission technology is described, and its potential market is considered; a market that encompasses teleconferencing, remote medical diagnosis, patient monitoring, transit station surveillance, as well as traffic management and control. In addition, current and potential television transmission systems and their costs and potential manufacturers are considered.

Geomorphological mapping of shallow landslides using UAVs

NASA Astrophysics Data System (ADS)

Fiorucci, Federica; Giordan, Daniele; Dutto, Furio; Rossi, Mauro; Guzzetti, Fausto

2015-04-01

The mapping of event shallow landslides is a critical activity, due to the large number of phenomena, mostly with small dimension, affecting extensive areas. This is commonly done through aerial photo-interpretation or through field surveys. Nowadays, landslide maps can be realized exploiting other methods/technologies: (i) airborne LiDARs, (ii) stereoscopic satellite images, and (iii) unmanned aerial vehicles (UAVs). In addition to the landslide maps, these methods/technologies allow the generation of updated Digital Terrain Models (DTM). In December 2013, in the Collazzone area (Umbria, Central Italy), an intense rainfall event triggered a large number of shallow landslides. To map the landslides occurred in the area, we exploited data and images obtained through (A) an airborne LiDAR survey, (B) a remote controlled optocopter (equipped with a Canon EOS M) survey, and (C) a stereoscopic satellite WorldView II MS. To evaluate the mapping accuracy of these methods, we select two landslides and we mapped them using a GPS RTK instrumentation. We consider the GPS survey as the benchmark being the most accurate system. The results of the comparison allow to highlight pros and cons of the methods/technologies used. LiDAR can be considered the most accurate system and in addition it allows the extraction and the classification of the digital surface models from the surveyed point cloud. Conversely, LiDAR requires additional time for the flight planning, and specific data analysis user capabilities. The analysis of the satellite WorldView II MS images facilitates the landslide mapping over large areas, but at the expenses of a minor resolution to detect the smaller landslides and their boundaries. UAVs can be considered the cheapest and fastest solution for the acquisition of high resolution ortho-photographs on limited areas, and the best solution for a multi-temporal analysis of specific landslide phenomena. Limitations are due to (i) the needs of optimal climatic conditions during the acquisition, (ii) the needs of ground control points to be acquired simultaneously with the UAV surveys, and (iii) the restrictive laws existing in different countries that could limit the use of these systems.

Executive control systems in the engineering design environment. M.S. Thesis

NASA Technical Reports Server (NTRS)

Hurst, P. W.

1985-01-01

An executive control system (ECS) is a software structure for unifying various applications codes into a comprehensive system. It provides a library of applications, a uniform access method through a cental user interface, and a data management facility. A survey of twenty-four executive control systems designed to unify various CAD/CAE applications for use in diverse engineering design environments within government and industry was conducted. The goals of this research were to establish system requirements to survey state-of-the-art architectural design approaches, and to provide an overview of the historical evolution of these systems. Foundations for design are presented and include environmental settings, system requirements, major architectural components, and a system classification scheme based on knowledge of the supported engineering domain(s). An overview of the design approaches used in developing the major architectural components of an ECS is presented with examples taken from the surveyed systems. Attention is drawn to four major areas of ECS development: interdisciplinary usage; standardization; knowledge utilization; and computer science technology transfer.

2017 Emerging Technology Domains Risk Survey

DTIC Science & Technology

2017-10-01

REV-03.18.2016.0 2017 Emerging Technology Domains Risk Survey Daniel Klinedinst Joel Land Kyle O’Meara October 2017 TECHNICAL REPORT CMU/SEI...to the CERT/CC 2016 Emerging Technol- ogy Domains Risk Survey [King 2016]. This list does not supersede previous reports. Many of the previously... Survey [King 2016]. Table 1: New and Emerging Technologies Gartner’s 2015 List of New Technology CERT’s List of Emerging Domains Trust Boundary

Human-building interaction at work: Findings from an interdisciplinary cross-country survey in Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

D'Oca, Simona; Pisello, Anna Laura; De Simone, Marilena

This study presents results from an interdisciplinary survey assessing contextual and behavioral factors driving occupants’ interaction with building and systems in offices located across three different Mediterranean climates in Turin (Northern), Perugia (Central), and Rende (Southern) Italy. The survey instrument is grounded in an interdisciplinary framework that bridges the gap between building physics and social science environments on the energy- and comfort-related human-building interaction in the workspace. Outcomes of the survey questionnaire provide insights into four key learning objectives: (1) individual occupant's motivational drivers regarding interaction with shared building environmental controls (such as adjustable thermostats, operable windows, blinds and shades,more » and artificial lighting), (2) group dynamics such as perceived social norms, attitudes, and intention to share controls, (3) occupant perception of the ease of use and knowledge of how to operate control systems, and (4) occupant-perceived comfort, satisfaction, and productivity. The study attempts to identify climatic, cultural, and socio-demographic influencing factors, as well as to establish the validity of the survey instrument and robustness of outcomes for future studies. Also, the paper aims at illustrating why and how social science insights can bring innovative knowledge into the adoption of building technologies in shared contexts, thus enhancing perceived environmental satisfaction and effectiveness of personal indoor climate control in office settings and impacting office workers’ productivity and reduced operational energy costs.« less

Human-building interaction at work: Findings from an interdisciplinary cross-country survey in Italy

DOE PAGES

D'Oca, Simona; Pisello, Anna Laura; De Simone, Marilena; ...

2018-01-31

This study presents results from an interdisciplinary survey assessing contextual and behavioral factors driving occupants’ interaction with building and systems in offices located across three different Mediterranean climates in Turin (Northern), Perugia (Central), and Rende (Southern) Italy. The survey instrument is grounded in an interdisciplinary framework that bridges the gap between building physics and social science environments on the energy- and comfort-related human-building interaction in the workspace. Outcomes of the survey questionnaire provide insights into four key learning objectives: (1) individual occupant's motivational drivers regarding interaction with shared building environmental controls (such as adjustable thermostats, operable windows, blinds and shades,more » and artificial lighting), (2) group dynamics such as perceived social norms, attitudes, and intention to share controls, (3) occupant perception of the ease of use and knowledge of how to operate control systems, and (4) occupant-perceived comfort, satisfaction, and productivity. The study attempts to identify climatic, cultural, and socio-demographic influencing factors, as well as to establish the validity of the survey instrument and robustness of outcomes for future studies. Also, the paper aims at illustrating why and how social science insights can bring innovative knowledge into the adoption of building technologies in shared contexts, thus enhancing perceived environmental satisfaction and effectiveness of personal indoor climate control in office settings and impacting office workers’ productivity and reduced operational energy costs.« less

Control technology for Richard Klinger, Inc. , Sidney, Ohio. Indepth survey report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitbrink, W.A.

1984-06-25

Environmental and breathing zone samples were analyzed for asbestos (1332214) at Richard Klinger Incorporated (SIC-3069), Sidney, Ohio in August 1983 as part of an in depth study of dust control during bag opening, dumping, and disposal. Asbestos control technology was inspected. Control of asbestos at the facility was achieved by using an automatic cleaner to clean spills and routinely remove settled and spilled asbestos from the floor. During periods of peak exposure, workers wore NIOSH approved respirators and disposable coveralls. Air sampling was used to identify any asbestos control problems. Closed bales of asbestos were torn. The author concludes thatmore » operation of the bag slitter does not increase asbestos concentrations. Closed bales of asbestos may be an emission source. Improving the quality of the wrapping around the bales and handling techniques during shipment are recommended.« less

Electrical features of new DNC, CNC system viewed

NASA Astrophysics Data System (ADS)

Fritzsch, W.; Kochan, D.; Schaller, J.; Zander, H. J.

1985-03-01

Control structures capable of solving the problems of a flexible minial-labor manufacturing process are analyzed. The present state of development of equipment technology is described, and possible ways of modeling control processes are surveyed. Concepts which are frequently differently interpreted in various specialized disciplines are systematized, with a view toward creating the prerequisites for interdisciplinary cooperation. Problems and information flow during the preparatory and performance phases of manufacturing are examined with respect to coupling CAD/CAM functions. Mathematical modeling for direct numerical control is explored.

Automobile Engine Development, Task Force Assessment, Preliminary Report.

ERIC Educational Resources Information Center

Caretto, L. S.; And Others

This report presents a comprehensive survey of current knowledge and ongoing research and development projects in the area of vehicular emissions and control. Information provided attempts to answer the questions: how can proposed standards be met with existing technology and what additional research would be required to obtain desired control…

The National Shipbuilding Research Program. Survey of Air and Water Quality Pollution Prevention and Control Technology Used in Shipyards and Similar Industries

DTIC Science & Technology

1998-01-09

vehicle washing 3. TSP and citric acid for bilge cleaning 1. no capture and filtration of weld fumes 8 1. black beauty abrasives 2...treatment 1. not treated N/A 12 N/A 1. treated on-site. with gravity oil water separator, acid cracking of the emulsion layer and parallel...less energy-intensive treatment technologies such as constructed wetlands for sewage treatment and anoxic limestone drains for acid mine drainage

An overview of platforms for cloud based development.

PubMed

Fylaktopoulos, G; Goumas, G; Skolarikis, M; Sotiropoulos, A; Maglogiannis, I

2016-01-01

This paper provides an overview of the state of the art technologies for software development in cloud environments. The surveyed systems cover the whole spectrum of cloud-based development including integrated programming environments, code repositories, software modeling, composition and documentation tools, and application management and orchestration. In this work we evaluate the existing cloud development ecosystem based on a wide number of characteristics like applicability (e.g. programming and database technologies supported), productivity enhancement (e.g. editor capabilities, debugging tools), support for collaboration (e.g. repository functionality, version control) and post-development application hosting and we compare the surveyed systems. The conducted survey proves that software engineering in the cloud era has made its initial steps showing potential to provide concrete implementation and execution environments for cloud-based applications. However, a number of important challenges need to be addressed for this approach to be viable. These challenges are discussed in the article, while a conclusion is drawn that although several steps have been made, a compact and reliable solution does not yet exist.

Experiences of model year 2011 Dodge and Jeep owners with collision avoidance and related technologies.

PubMed

Cicchino, Jessica B; McCartt, Anne T

2015-01-01

Crash avoidance technologies have the potential to prevent or mitigate many crashes, but their effectiveness depends on drivers' acceptance and proper use. Owners of 2011 Dodge Charger, Dodge Durango, and Jeep Grand Cherokee vehicles were interviewed about their experiences with their vehicles' technologies. Interviews were conducted in April 2013 with 215 owners of Dodge and Jeep vehicles with adaptive cruise control and forward collision warning and 215 owners with blind spot monitoring and rear cross-path detection. Most owners said that they always keep each collision avoidance technology turned on, and more than 90% of owners with each system would want the technology again on their next vehicle. The majority believed that the systems had helped prevent a collision; this ranged from 54% of drivers with forward collision warning to more than three-quarters with blind spot monitoring and rear cross-path detection. Some owners reported behavioral changes with the systems, but over-reliance on them is not prevalent. Reported use of the systems varied by the age and gender of the driver and duration of vehicle ownership to a greater degree than in previous surveys of luxury Volvo and Infiniti vehicles with collision avoidance technologies. Notably, drivers aged 40 and younger were most likely to report that forward collision warning had alerted them multiple times and that it had prevented a collision and that they follow the vehicle ahead less closely with adaptive cruise control. Reports of waiting for the alert from forward collision warning before braking were infrequent but increased with duration of ownership. However, these reports could reflect confusion of the system with adaptive cruise control, which alerts drivers when braking is necessary to maintain a preset speed or following distance but a crash is not imminent. Consistent with previous surveys of luxury vehicle owners with collision avoidance technologies, acceptance and use remains high among owners of more mainstream vehicles. Varying experiences with the technologies by driver age and gender suggest that safety benefits are not uniform for all drivers, and differential benefits may become increasingly apparent as collision avoidance technologies become available to a more heterogeneous population of drivers. The potential for over-reliance on the technologies should continue to be monitored, especially as drivers gain more experience with them.

Thrust Vector Control for Nuclear Thermal Rockets

NASA Technical Reports Server (NTRS)

Ensworth, Clinton B. F.

2013-01-01

Future space missions may use Nuclear Thermal Rocket (NTR) stages for human and cargo missions to Mars and other destinations. The vehicles are likely to require engine thrust vector control (TVC) to maintain desired flight trajectories. This paper explores requirements and concepts for TVC systems for representative NTR missions. Requirements for TVC systems were derived using 6 degree-of-freedom models of NTR vehicles. Various flight scenarios were evaluated to determine vehicle attitude control needs and to determine the applicability of TVC. Outputs from the models yielded key characteristics including engine gimbal angles, gimbal rates and gimbal actuator power. Additional factors such as engine thrust variability and engine thrust alignment errors were examined for impacts to gimbal requirements. Various technologies are surveyed for TVC systems for the NTR applications. A key factor in technology selection is the unique radiation environment present in NTR stages. Other considerations including mission duration and thermal environments influence the selection of optimal TVC technologies. Candidate technologies are compared to see which technologies, or combinations of technologies best fit the requirements for selected NTR missions. Representative TVC systems are proposed and key properties such as mass and power requirements are defined. The outputs from this effort can be used to refine NTR system sizing models, providing higher fidelity definition for TVC systems for future studies.

Towards A Taxonomy Of Attacks Against Energy Control Systems

NASA Astrophysics Data System (ADS)

Fleury, Terry; Khurana, Himanshu; Welch, Von

Control systems in the energy sector (e.g., supervisory control and data acquisition (SCADA) systems) involve a hierarchy of sensing, monitoring and control devices connected to centralized control stations or centers. The incorporation of commercial off-the-shelf technologies in energy control systems makes them vulnerable to cyber attacks. A taxonomy of cyber attacks against control systems can assist the energy sector in managing the cyber threat. This paper takes the first step towards a taxonomy by presenting a comprehensive model of attacks, vulnerabilities and damage related to control systems. The model is populated based on a survey of the technical literature from industry, academia and national laboratories.

Recent trends in assistive technology for mobility

PubMed Central

2012-01-01

Loss of physical mobility makes maximal participation in desired activities more difficult and in the worst case fully prevents participation. This paper surveys recent work in assistive technology to improve mobility for persons with a disability, drawing on examples observed during a tour of academic and industrial research sites in Europe. The underlying theme of this recent work is a more seamless integration of the capabilities of the user and the assistive technology. This improved integration spans diverse technologies, including powered wheelchairs, prosthetic limbs, functional electrical stimulation, and wearable exoskeletons. Improved integration is being accomplished in three ways: 1) improving the assistive technology mechanics; 2) improving the user-technology physical interface; and 3) sharing of control between the user and the technology. We provide an overview of these improvements in user-technology integration and discuss whether such improvements have the potential to be transformative for people with mobility impairments. PMID:22520500

Monitoring Fine-Grained Sediment in the Colorado River Ecosystem, Arizona - Control Network and Conventional Survey Techniques

USGS Publications Warehouse

Hazel, Joseph E.; Kaplinski, Matt; Parnell, Roderic A.; Kohl, Keith; Schmidt, John C.

2008-01-01

In 2002, fine-grained sediment (sand, silt, and clay) monitoring in the Colorado River downstream from Glen Canyon Dam was initiated to survey channel topography at scales previously unobtainable in this canyon setting. This report presents the methods used to establish the high-resolution global positioning system (GPS) control network required for this effort as well as the conventional surveying techniques used in the study. Using simultaneous, dual-frequency GPS vector-based methods, the network points were determined to have positioning accuracies of less than 0.03 meters (m) and ellipsoidal height accuracies of between 0.01 and 0.10 m at a 95-percent degree of confidence. We also assessed network point quality with repeated, electronic (optical) total-station observations at 39 points for a total of 362 measurements; the mean range was 0.022 m in horizontal and 0.13 in vertical at a 95-percent confidence interval. These results indicate that the control network is of sufficient spatial and vertical accuracy for collection of airborne and subaerial remote-sensing technologies and integration of these data in a geographic information system on a repeatable basis without anomalies. The monitoring methods were employed in up to 11 discrete reaches over various time intervals. The reaches varied from 1.3 to 6.4 kilometers in length. Field results from surveys in 2000, 2002, and 2004 are described, during which conventional surveying was used to collect more than 3000 points per day. Ground points were used as checkpoints and to supplement areas just below or above the water surface, where remote-sensing data are not collected or are subject to greater error. An accuracy of +or- 0.05 m was identified as the minimum precision of individual ground points. These results are important for assessing digital elevation model (DEM) quality and identifying detection limits of significant change among surfaces generated from remote-sensing technologies.

Social media technologies for HIV prevention study retention among minority men who have sex with men (MSM).

PubMed

Young, Sean D

2014-09-01

This brief report describes results on study retention among minority men who have sex with men (MSM) from a 12-week, social networking-based, HIV prevention trial with 1-year follow-up. Participants, primarily minority MSM, were recruited using online and offline methods and randomly assigned to a Facebook (intervention or control) group. Participants completed a baseline survey and were asked to complete two follow-up surveys (12-week follow-up and 1-year post-intervention). 94 % of participants completed the first two surveys and over 82 % completed the baseline and both post-intervention surveys. Participants who spent a greater frequency of time online had almost twice the odds of completing all surveys. HIV negative participants, compared to those who were HIV positive, had over 25 times the odds of completing all surveys. HIV prevention studies on social networking sites can yield high participant retention rates.

CHASE Survey of Technology Needs

DTIC Science & Technology

2017-03-01

CHASE Survey of Technology Needs Shahed Enamul Quadir ECE Department University of Connecticut Storrs, CT, USA Daniel DiMase Honeywell, Inc...based on a survey conducted in late 2015. Counterfeits and Hardware Trojans have been identified as areas needing continued research and focus... survey of its advisory board and industry professionals to determine the technology needs in the area of IC counterfeits, hardware assurance

Surveying and monitoring for vulnerability assessment of an ancient building.

PubMed

Fregonese, Luigi; Barbieri, Gaia; Biolzi, Luigi; Bocciarelli, Massimiliano; Frigeri, Aronne; Taffurelli, Laura

2013-07-31

This paper examines how surveying and monitoring improve our knowledge about ancient buildings, allow the interpretation of their structural response and help in the search for the best solutions for their conservation. The case study of Palazzo del Capitano in Mantua (Italy) is analyzed. In particular, the attention is focused on the use of a Terrestrial Laser Scanner (TLS) for surveying and monitoring too, considering that the building structural control has been performed in combination with other traditional topographic techniques such as geometric leveling and topographic networks for 3D control based on measurements through total stations. The study of TLS monitoring has been tested only in the last decade and it is an innovative method for the detection of displacements of particular surfaces. Till now the research has focused only on the use of TLS monitoring to control large structures and in particular landscape situations; thus its use for a civil construction and historical buildings is a new field of investigation. Despite the fact technological development and new methodologies seem offer new future potential for the analysis of ancient buildings, currently there are still important limits for the application of the investigated surveying and monitoring techniques.

Surveying and Monitoring for Vulnerability Assessment of an Ancient Building

PubMed Central

Fregonese, Luigi; Barbieri, Gaia; Biolzi, Luigi; Bocciarelli, Massimiliano; Frigeri, Aronne; Taffurelli, Laura

2013-01-01

This paper examines how surveying and monitoring improve our knowledge about ancient buildings, allow the interpretation of their structural response and help in the search for the best solutions for their conservation. The case study of Palazzo del Capitano in Mantua (Italy) is analyzed. In particular, the attention is focused on the use of a Terrestrial Laser Scanner (TLS) for surveying and monitoring too, considering that the building structural control has been performed in combination with other traditional topographic techniques such as geometric leveling and topographic networks for 3D control based on measurements through total stations. The study of TLS monitoring has been tested only in the last decade and it is an innovative method for the detection of displacements of particular surfaces. Till now the research has focused only on the use of TLS monitoring to control large structures and in particular landscape situations; thus its use for a civil construction and historical buildings is a new field of investigation. Despite the fact technological development and new methodologies seem offer new future potential for the analysis of ancient buildings, currently there are still important limits for the application of the investigated surveying and monitoring techniques. PMID:23912425

An overview on development of neural network technology

NASA Technical Reports Server (NTRS)

Lin, Chun-Shin

1993-01-01

The study has been to obtain a bird's-eye view of the current neural network technology and the neural network research activities in NASA. The purpose was two fold. One was to provide a reference document for NASA researchers who want to apply neural network techniques to solve their problems. Another one was to report out survey results regarding NASA research activities and provide a view on what NASA is doing, what potential difficulty exists and what NASA can/should do. In a ten week study period, we interviewed ten neural network researchers in the Langley Research Center and sent out 36 survey forms to researchers at the Johnson Space Center, Lewis Research Center, Ames Research Center and Jet Propulsion Laboratory. We also sent out 60 similar forms to educators and corporation researchers to collect general opinions regarding this field. Twenty-eight survey forms, 11 from NASA researchers and 17 from outside, were returned. Survey results were reported in our final report. In the final report, we first provided an overview on the neural network technology. We reviewed ten neural network structures, discussed the applications in five major areas, and compared the analog, digital and hybrid electronic implementation of neural networks. In the second part, we summarized known NASA neural network research studies and reported the results of the questionnaire survey. Survey results show that most studies are still in the development and feasibility study stage. We compared the techniques, application areas, researchers' opinions on this technology, and many aspects between NASA and non-NASA groups. We also summarized their opinions on difficulties encountered. Applications are considered the top research priority by most researchers. Hardware development and learning algorithm improvement are the next. The lack of financial and management support is among the difficulties in research study. All researchers agree that the use of neural networks could result in cost saving. Fault tolerance has been claimed as one important feature of neural computing. However, the survey indicates that very few studies address this issue. Fault tolerance is important in space mission and aircraft control. We believe that it is worthy for NASA to devote more efforts into the utilization of this feature.

Surface Contamination Monitor and Survey Information Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-02-01

Shonka Research Associates, Inc.`s (SRA) Surface Contamination Monitor and Survey Information management System (SCM/SIMS) is designed to perform alpha and beta radiation surveys of floors and surfaces and document the measured data. The SRA-SCM/SIMS technology can be applied to routine operational surveys, characterization surveys, and free release and site closure surveys. Any large nuclear site can make use of this technology. This report describes a demonstration of the SRA-SCM/SIMS technology. This demonstration is part of the chicago Pile-5 (CP-5) Large-Scale Demonstration Project (LSDP) sponsored by the US Department of Energy (DOE), Office of Science and Technology (ST), Deactivation and Decommissioningmore » Focus Area (DDFA). The objective of the LSDP is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East`s (ANL) CP-5 Research Reactor Facility. The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies.« less

A Review of Noise and Vibration Control Technologies for Rotorcraft Transmissions

NASA Technical Reports Server (NTRS)

Scheidler, Justin J.; Asnani, Vivake M.

2016-01-01

An expanded commercial use of rotorcraft can alleviate runway congestion and improve the accessibility of routine air travel. To date, commercial use has been hindered by excessive cabin noise. The primary noise source is structure-borne vibration originating from the main rotor gearbox. Despite significant advancements in gear design, the gear mesh tones generated often exceed 100 dB. This paper summarizes the findings of a literature survey of vibration control technologies that serve to attenuate this vibration near the source, before it spreads into the airframe and produces noise. The scope is thus limited to vibration control treatments and modifications of the gears, driveline, housing structures, and the strut connections to the airframe. The findings of the literature are summarized and persistent and unresolved issues are identified. An emphasis is placed on components and systems that have been demonstrated in flight vehicles. Then, a discussion is presented of emerging technologies that have the potential to make significant advancements over the state of the art.

'We have the internet in our hands': Bangladeshi college students' use of ICTs for health information.

PubMed

Waldman, Linda; Ahmed, Tanvir; Scott, Nigel; Akter, Shahinoor; Standing, Hilary; Rasheed, Sabrina

2018-03-20

Information and Communications Technologies (ICTs) which enable people to access, use and promote health information through digital technology, promise important health systems innovations which can challenge gatekeepers' control of information, through processes of disintermediation. College students, in pursuit of sexual and reproductive health (SRH) information, are particularly affected by gatekeeping as strong social and cultural norms restrict their access to information and services. This paper examines mobile phone usage for obtaining health information in Mirzapur, Bangladesh. It contrasts college students' usage with that of the general population, asks whether students are using digital technologies for health information in innovative ways, and examines how gender affects this. This study relies on two surveys: a 2013-2014 General Survey that randomly sampled 854 households drawn from the general population and a 2015 Student Survey that randomly sampled 436 students from two Mirzapur colleges. Select focus group discussions and in-depth interviews were undertaken with students. Icddr,b's Ethical Review Board granted ethical clearance. The data show that Mirzapur's college students are economically relatively well positioned, more likely to own mobile and smart phones, and more aware of the internet than the general population. They are interested in health information and use phones and computers to access information. Moreover, they use digital technology to share previously-discreet information, adding value to that information and bypassing former gatekeepers. But access to health information is not entirely unfettered, affecting male and female students differently, and powerful gatekeepers, both old and new, can still control sources of information. Personal searches for SRH and the resultant online information shared through discrete, personal face-to-face discussions has some potential to challenge social norms. This is particularly so for women students, as sharing information may enable them to bypass gatekeepers and make decisions about reproduction. This suggests that digital health information seeking may be exercising a disruptive effect within the health sector. However, the extent of this disruption may depend, not on students' mobile phone usage, but on the degree to which powerful new gatekeepers are able to retain control over and market SRH information through students' peer-to-peer sharing.

ECLSS Integration Analysis: Advanced ECLSS Subsystem and Instrumentation Technology Study for the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

1990-01-01

In his July 1989 space policy speech, President Bush proposed a long range continuing commitment to space exploration and development. Included in his goals were the establishment of permanent lunar and Mars habitats and the development of extended duration space transportation. In both cases, a major issue is the availability of qualified sensor technologies for use in real-time monitoring and control of integrated physical/chemical/biological (p/c/b) Environmental Control and Life Support Systems (ECLSS). The purpose of this study is to determine the most promising instrumentation technologies for future ECLSS applications. The study approach is as follows: 1. Precursor ECLSS Subsystem Technology Trade Study - A database of existing and advanced Atmosphere Revitalization (AR) and Water Recovery and Management (WRM) ECLSS subsystem technologies was created. A trade study was performed to recommend AR and WRM subsystem technologies for future lunar and Mars mission scenarios. The purpose of this trade study was to begin defining future ECLSS instrumentation requirements as a precursor to determining the instrumentation technologies that will be applicable to future ECLS systems. 2. Instrumentation Survey - An instrumentation database of Chemical, Microbial, Conductivity, Humidity, Flowrate, Pressure, and Temperature sensors was created. Each page of the sensor database report contains information for one type of sensor, including a description of the operating principles, specifications, and the reference(s) from which the information was obtained. This section includes a cursory look at the history of instrumentation on U.S. spacecraft. 3. Results and Recommendations - Instrumentation technologies were recommended for further research and optimization based on a consideration of both of the above sections. A sensor or monitor technology was recommended based on its applicability to future ECLS systems, as defined by the ECLSS Trade Study (1), and on whether its characteristics were considered favorable relative to similar instrumentation technologies (competitors), as determined from the Instrumentation Survey (2). The instrumentation technologies recommended by this study show considerable potential for development and promise significant returns if research efforts are invested.

An Innovative Unmanned System for Advanced Environmental Monitoring: Design and Development

NASA Astrophysics Data System (ADS)

Marsella, Ennio; Giordano, Laura; Evangelista, Lorenza; Iengo, Antonio; di Filippo, Alessandro; Coppola, Aniello

2015-04-01

The paper summarizes the design and development of a new technology and tools for real-time coordination and control of unmanned vehicles for advanced environmental monitoring. A new Unmanned System has been developed at Institute for Coastal Marine Environmental - National Research Council (Italy), in the framework of two National Operational Programs (PON): Technological Platform for Geophysical and Environmental Marine Survey-PITAM and Integrated Systems and Technologies for Geophysical and Environmental Monitoring in coastal-marine areas-STIGEAC. In particular, the system includes one Unmanned Aerial Vehicle (UAV) and two Unmanned Marine Vehicles (UMV). Major innovations concern the implementation of a new architecture to control each drone and/or to allow the cooperation between heterogeneous vehicles, the integration of distributed sensing techniques and real-time image processing capabilities. Part of the research in these projects involves, therefore, an architecture, where the ground operator can communicate with the Unmanned Vehicles at various levels of abstraction using pointing devices and video viewing. In detail, a Ground Control Station (GCS) has been design and developed to allow the government in security of the drones within a distance up to twenty kilometers for air explorations and within ten nautical miles for marine activities. The Ground Control Station has the following features: 1. hardware / software system for the definition of the mission profiles; 3. autonomous and semi-autonomous control system by remote control (joystick or other) for the UAV and UMVs; 4. integrated control system with comprehensive visualization capabilities, monitoring and archiving of real-time data acquired from scientific payload; 5. open structure to future additions of systems, sensors and / or additional vehicles. In detail, the UAV architecture is a dual-rotor, with an endurance ranging from 55 to 200 minutes, depending on payload weight (maximum 26 kg) and wind conditions, and a capability to survey an area of up to 5x5 square kilometers. The UAV payload consists of three different types of sensors: a laser scanner, a thermal-camera and an integrated camera reflex with gimbal. The laser scanner has 10 mm survey-grade accuracy and a field of view up to 330°. The thermal-camera has a resolution 640x480 pixels and a thermal sensitivity <20 mK (at 30 °C), while the reflex is a 22.3 Megapixel full-frame sensor. In addition to the common applications, such as generating mapping, charting, and geodesy products, the system allows performing real-time survey and monitoring of different natural risk under dangerous condition. The system is, also, address to environmental risk monitoring and prevention, industrial activity and emergency interventions related to environmental crises (i.e. oil spills).

76 FR 8371 - Notice Correction; Generic Submission of Technology Transfer Center (TTC) External Customer...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) The Federal... project titled, ``Technology Transfer Center (TTC) External Customer Satisfaction Survey (NCI)'' was... will include multiple customer satisfaction surveys over the course of three years. At this time, only...

On-Orbit Autonomous Assembly from Nanosatellites

NASA Technical Reports Server (NTRS)

Murchison, Luke S.; Martinez, Andres; Petro, Andrew

2015-01-01

The On-Orbit Autonomous Assembly from Nanosatellites (OAAN) project will demonstrate autonomous control algorithms for rendezvous and docking maneuvers; low-power reconfigurable magnetic docking technology; and compact, lightweight and inexpensive precision relative navigation using carrier-phase differential (CD) GPS with a three-degree of freedom ground demonstration. CDGPS is a specific relative position determination method that measures the phase of the GPS carrier wave to yield relative position data accurate to.4 inch (1 centimeter). CDGPS is a technology commonly found in the surveying industry. The development and demonstration of these technologies will fill a current gap in the availability of proven autonomous rendezvous and docking systems for small satellites.

Sensor Acquisition for Water Utilities: Survey, Down Selection Process, and Technology List

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alai, M; Glascoe, L; Love, A

2005-06-29

The early detection of the biological and chemical contamination of water distribution systems is a necessary capability for securing the nation's water supply. Current and emerging early-detection technology capabilities and shortcomings need to be identified and assessed to provide government agencies and water utilities with an improved methodology for assessing the value of installing these technologies. The Department of Homeland Security (DHS) has tasked a multi-laboratory team to evaluate current and future needs to protect the nation's water distribution infrastructure by supporting an objective evaluation of current and new technologies. The LLNL deliverable from this Operational Technology Demonstration (OTD) wasmore » to assist the development of a technology acquisition process for a water distribution early warning system. The technology survey includes a review of previous sensor surveys and current test programs and a compiled database of relevant technologies. In the survey paper we discuss previous efforts by governmental agencies, research organizations, and private companies. We provide a survey of previous sensor studies with regard to the use of Early Warning Systems (EWS) that includes earlier surveys, testing programs, and response studies. The list of sensor technologies was ultimately developed to assist in the recommendation of candidate technologies for laboratory and field testing. A set of recommendations for future sensor selection efforts has been appended to this document, as has a down selection example for a hypothetical water utility.« less

Where in the World?: GPS Projects for the Technology Class

ERIC Educational Resources Information Center

Guccione, Sam

2005-01-01

Global positioning system (GPS) has many uses. They include navigation, location finding, vehicle tracking, surveying, autonomous control of highway construction equipment, scientific activities, asset location and entertainment. The GPS is a constellation of 24 satellites located in a 10,000-mile radius orbit in a way that allows for at least six…

A Survey and Analysis of Access Control Architectures for XML Data

DTIC Science & Technology

2006-03-01

13 4. XML Query Engines ...castle and the drawbridge over the moat. Extending beyond the visual analogy, there are many key components to the protection of information and...technology. While XML’s original intent was to enable large-scale electronic publishing over the internet, its functionality is firmly rooted in its

Abu Dhabi Basemap Update Using the LiDAR Mobile Mapping Technology

NASA Astrophysics Data System (ADS)

Alshaiba, Omar; Amparo Núñez-Andrés, M.; Lantada, Nieves

2016-04-01

Mobile LiDAR system provides a new technology which can be used to update geospatial information by direct and rapid data collection. This technology is faster than the traditional survey ways and has lower cost. Abu Dhabi Municipal System aims to update its geospatial system frequently as the government entities have invested heavily in GIS technology and geospatial data to meet the repaid growth in the infrastructure and construction projects in recent years. The Emirate of Abu Dhabi has witnessed a huge growth in infrastructure and construction projects in recent years. Therefore, it is necessary to develop and update its basemap system frequently to meet their own organizational needs. Currently, the traditional ways are used to update basemap system such as human surveyors, GPS receivers and controller (GPS assigned computer). Then the surveyed data are downloaded, edited and reviewed manually before it is merged to the basemap system. Traditional surveying ways may not be applicable in some conditions such as; bad weather, difficult topographic area and boundary area. This paper presents a proposed methodology which uses the Mobile LiDAR system to update basemap in Abu Dhabi by using daily transactions services. It aims to use and integrate the mobile LiDAR technology into the municipality's daily workflow such that it becomes the new standard cost efficiency operating procedure for updating the base-map in Abu Dhabi Municipal System. On another note, the paper will demonstrate the results of the innovated workflow for the base-map update using the mobile LiDAR point cloud and few processing algorithms.

Advanced life support study

NASA Technical Reports Server (NTRS)

1991-01-01

Summary reports on each of the eight tasks undertaken by this contract are given. Discussed here is an evaluation of a Closed Ecological Life Support System (CELSS), including modeling and analysis of Physical/Chemical Closed Loop Life Support (P/C CLLS); the Environmental Control and Life Support Systems (ECLSS) evolution - Intermodule Ventilation study; advanced technologies interface requirements relative to ECLSS; an ECLSS resupply analysis; the ECLSS module addition relocation systems engineering analysis; an ECLSS cost/benefit analysis to identify rack-level interface requirements of the alternate technologies evaluated in the ventilation study, with a comparison of these with the rack level interface requirements for the baseline technologies; advanced instrumentation - technology database enhancement; and a clean room survey and assessment of various ECLSS evaluation options for different growth scenarios.

The impact of information technology and organizational focus on the visibility of patient care errors.

PubMed

Walston, Stephen L; Mwachofi, Ari; Aldosari, Bakheet; Al-Omar, Badran A; Yousef, Asmaa Al; Sheikh, Asiya

2010-01-01

INVESTIGATED: The implementation of information systems and the creation of an open culture, characterized by emphasis on patient safety and problem solving, are 2 means suggested to improve health care quality. This study examines the effects of use of information technology and focus on patient safety and problem solving on the visibility of patient care errors. A survey of nurses in Saudi Arabia is analyzed by means of factor analysis and multiregression analysis to examine nurses' use of information technology and culture in controlling errors. Our research suggests that greater use of information technology to control patient care errors may reduce the prevalence of such errors while an increased focus on patient safety and problem solving facilitates an open environment where errors can be more openly discussed and addressed. The use of technology appears to have a role in decreasing errors. Yet, an organization that focuses on problem solving and patient safety can open lines of communication and create a culture in which errors can be discussed and resolved.

Non-mechanical beam control for entry, descent and landing laser radar (Conference Presentation)

NASA Astrophysics Data System (ADS)

Stockley, Jay E.; Kluttz, Kelly; Hosting, Lance; Serati, Steve; Bradley, Cullen P.; McManamon, Paul F.; Amzajerdian, Farzin

2017-05-01

Laser radar for entry, descent, and landing (EDL) applications as well as the space docking problem could benefit from a low size, weight, and power (SWaP) beam control system. Moreover, an inertia free approach employing non-mechanical beam control is also attractive for laser radar that is intended to be employed aboard space platforms. We are investigating a non-mechanical beam steering (NMBS) sub-system based on liquid crystal polarization grating (LCPG) technology with emphasis placed on improved throughput and significant weight reduction by combining components and drastically reducing substrate thicknesses. In addition to the advantages of non-mechanical, gimbal free beam control, and greatly improved SWaP, our approach also enables wide area scanning using a scalable architecture. An extraterrestrial application entails additional environmental constraints, consequently an environmental test plan tailored to an EDL mission will also be discussed. In addition, we will present advances in continuous fine steering technology which would complement the coarse steering LCPG technology. A low-SWaP, non-mechanical beam control system could be used in many laser radar remote sensing applications including meteorological studies and agricultural or environmental surveys in addition to the entry, descent, and landing application.

Digital Tablet PCs as New Technologies of Writing and Learning: A Survey of Perceptions of Digital Ink Technology

ERIC Educational Resources Information Center

Reins, Kevin

2007-01-01

The purpose of this study was to investigate effective uses of digital ink technology in an elementary mathematics methods course. A survey methodology was used in the study to examine the participants' perceptions toward this technology for teaching and learning. All of the items on the survey produced response means between 5.0 and 6.0, with a…

Integration of Laser Scanning and Three-dimensional Models in the Legal Process Following an Industrial Accident.

PubMed

Eyre, Matthew; Foster, Patrick; Speake, Georgina; Coggan, John

2017-09-01

In order to obtain a deeper understanding of an incident, it needs to be investigated to "peel back the layers" and examine both immediate and underlying failures that contributed to the event itself. One of the key elements of an effective accident investigation is recording the scene for future reference. In recent years, however, there have been major advances in survey technology, which have provided the ability to capture scenes in three dimension to an unprecedented level of detail, using laser scanners. A case study involving a fatal incident was surveyed using three-dimensional laser scanning, and subsequently recreated through virtual and physical models. The created models were then utilized in both accident investigation and legal process, to explore the technologies used in this setting. Benefits include explanation of the event and environment, incident reconstruction, preservation of evidence, reducing the need for site visits, and testing of theories. Drawbacks include limited technology within courtrooms, confusion caused by models, cost, and personal interpretation and acceptance in the data. Laser scanning surveys can be of considerable use in jury trials, for example, in case the location supports the use of a high-definition survey, or an object has to be altered after the accident and it has a specific influence on the case and needs to be recorded. However, consideration has to be made in its application and to ensure a fair trial, with emphasis being placed on the facts of the case and personal interpretation controlled.

NEWFIRM Software--System Integration Using OPC

NASA Astrophysics Data System (ADS)

Daly, P. N.

2004-07-01

The NOAO Extremely Wide-Field Infra-Red Mosaic (NEWFIRM) camera is being built to satisfy the survey science requirements on the KPNO Mayall and CTIO Blanco 4m telescopes in an era of 8m+ aperture telescopes. Rather than re-invent the wheel, the software system to control the instrument has taken existing software packages and re-used what is appropriate. The result is an end-to-end observation control system using technology components from DRAMA, ORAC, observing tools, GWC, existing in-house motor controllers and new developments like the MONSOON pixel server.

Asian Carp Survivability Experiments and Water Transport Surveys in the Illinois River. Volume 2

DTIC Science & Technology

2013-01-01

Reference 3)) have documented the egg and larval stages of grass, black, silver and bighead carps in the Yangtze River. This early paper also reported...rates at controlled tempera- tures to better understand the early egg and larval stages of silver and bighead carp. In the Yangtze River, after the...translated by Duane Chapman 2006, Gezhouba Water Control Project and four famous fishes in Yangtze River, Hubei Science and Technology Press, Wuhan

Unmet Communication and Information Needs for Patients with IBD: Implications for Mobile Health Technology.

PubMed

Khan, Sameer; Dasrath, Florence; Farghaly, Sara; Otobo, Emamuzo; Riaz, Muhammad Safwan; Rogers, Jason; Castillo, Anabella; Atreja, Ashish

2016-01-01

In order to develop an application that addresses the most significant challenges facing IBD patients, this qualitative study explored the major hurdles of living with IBD, the information needs of IBD patients, and how application technology may be used to improve quality of life. 15 IBD patients participated in two focus groups of 120 minutes each. Data collection was achieved by combining focus groups with surveys and direct observation of patients looking at a patient-engaged app (HealthPROMISE) screenshots. The survey elicited information on demographics, health literacy and quality of life through the Short IBD Questionnaire (SIBDQ). The needs of IBD patients center around communication as it relates to both patient information needs and navigating the social impacts of IBD on patients' lives: Communication Challenges regarding Information Needs: Patients cited a doctor-patient communication divide where there is a continued lack of goal setting when discussing treatments and a lack of objectivity in disease control. When objectively compared with the SIBDQ, nearly half of the patients in the focus groups wrongly estimated their IBD control.Communication Challenges regarding Social Impacts of IBD: Patients strongly felt that while IBD disrupts routines, adds significant stress, and contributes to a sense of isolation, the impact of these issues would be significantly alleviated through more conversation and better support.Implication for Mobile Health Solutions: Patients want a tool that improves tracking of symptoms, medication adherence and provides education. Physician feedback to patient input on an application is required for long-term sustainability. IBD patients need mobile health technologies that evaluate disease control and the goals of care. Patients feel an objective assessment of their disease control, goal setting and physician feedback will greatly enhance utilization of all mobile health applications.

A Survey of Hardware and Software Technologies for the Rapid Development of Multimedia Instructional Modules

ERIC Educational Resources Information Center

Ganesan, Nanda

2008-01-01

A survey of hardware and software technologies was conducted to identify suitable technologies for the development of instructional modules representing various instructional approaches. The approaches modeled were short PowerPoint presentations, chalk-and-talk type of lectures and software tutorials. The survey focused on identifying application…

U. S. GEOLOGICAL SURVEY'S NATIONAL REAL-TIME HYDROLOGIC INFORMATION SYSTEM USING GOES SATELLITE TECHNOLOGY.

USGS Publications Warehouse

Shope, William G.

1987-01-01

The U. S. Geological Survey maintains the basic hydrologic data collection system for the United States. The Survey is upgrading the collection system with electronic communications technologies that acquire, telemeter, process, and disseminate hydrologic data in near real-time. These technologies include satellite communications via the Geostationary Operational Environmental Satellite, Data Collection Platforms in operation at over 1400 Survey gaging stations, Direct-Readout Ground Stations at nine Survey District Offices and a network of powerful minicomputers that allows data to be processed and disseminate quickly.

A randomized controlled trial to evaluate the Make Safe Happen® app-a mobile technology-based safety behavior change intervention for increasing parents' safety knowledge and actions.

PubMed

McKenzie, Lara B; Roberts, Kristin J; Clark, Roxanne; McAdams, Rebecca; Abdel-Rasoul, Mahmoud; Klein, Elizabeth G; Keim, Sarah A; Kristel, Orie; Szymanski, Alison; Cotton, Christopher G; Shields, Wendy C

2018-03-12

Many unintentional injuries that occur in and around the home can be prevented through the use of safety equipment and by consistently following existing safety recommendations. Unfortunately, uptake of these safety behaviors is unacceptably low. This paper describes the design of the Make Safe Happen® smartphone application evaluation study, which aims to evaluate a mobile technology-based safety behavior change intervention on parents' safety knowledge and actions. Make Safe Happen® app evaluation study is a randomized controlled trial. Participants will be parents of children aged 0-12 years who are recruited from national consumer online survey panels. Parents will complete a pretest survey, and will be randomized to receive the Make Safe Happen® app or a non-injury-related app, and then complete a posttest follow-up survey after 1 week. Primary outcomes are: (1) safety knowledge; (2) safety behaviors; (3) safety device acquisition and use, and (4) behavioral intention to take safety actions. Anticipated study results are presented. Wide-reaching interventions, to reach substantial parent and caregiver audiences, to effectively reduce childhood injuries are needed. This study will contribute to the evidence-base about how to increase safety knowledge and actions to prevent home-related injuries in children. NCT02751203 ; Pre-results.

A survey of system architecture requirements for health care-based wireless sensor networks.

PubMed

Egbogah, Emeka E; Fapojuwo, Abraham O

2011-01-01

Wireless Sensor Networks (WSNs) have emerged as a viable technology for a vast number of applications, including health care applications. To best support these health care applications, WSN technology can be adopted for the design of practical Health Care WSNs (HCWSNs) that support the key system architecture requirements of reliable communication, node mobility support, multicast technology, energy efficiency, and the timely delivery of data. Work in the literature mostly focuses on the physical design of the HCWSNs (e.g., wearable sensors, in vivo embedded sensors, et cetera). However, work towards enhancing the communication layers (i.e., routing, medium access control, et cetera) to improve HCWSN performance is largely lacking. In this paper, the information gleaned from an extensive literature survey is shared in an effort to fortify the knowledge base for the communication aspect of HCWSNs. We highlight the major currently existing prototype HCWSNs and also provide the details of their routing protocol characteristics. We also explore the current state of the art in medium access control (MAC) protocols for WSNs, for the purpose of seeking an energy efficient solution that is robust to mobility and delivers data in a timely fashion. Furthermore, we review a number of reliable transport layer protocols, including a network coding based protocol from the literature, that are potentially suitable for delivering end-to-end reliability of data transmitted in HCWSNs. We identify the advantages and disadvantages of the reviewed MAC, routing, and transport layer protocols as they pertain to the design and implementation of a HCWSN. The findings from this literature survey will serve as a useful foundation for designing a reliable HCWSN and also contribute to the development and evaluation of protocols for improving the performance of future HCWSNs. Open issues that required further investigations are highlighted.

Survey of Wastewater Discharge, Eielson AFB, Alaska, EHL(K) 73-24

DTIC Science & Technology

1973-12-01

the Department of Defense. ii TABLE OF CONTENTS Section Page I. SUMMARY .................................................. 1 II. INTRODUCTION ...II. INTRODUCTION A. Purpose And Objectives The USAF Environmental Health Laboratories were requested to provide assistance in improving existing water...equivalent to best practicable control technology currently available as shall be defined for each industrial waste. 3. Proposed Performance Specifications

Classroom Technology in Business Schools: A Survey of Installations and Attitudes toward Teaching and Learning

ERIC Educational Resources Information Center

Parker, Betty; Burnie, David

2009-01-01

A survey of administrators and faculty of AACSB-accredited business schools provided insights into current classroom technology infrastructure, attitudes towards technology and learning, and the use of web course tools in business school classrooms. The results of the survey provided four major findings: business schools are utilizing high levels…

Social Touch Technology: A Survey of Haptic Technology for Social Touch.

PubMed

Huisman, Gijs

2017-01-01

This survey provides an overview of work on haptic technology for social touch. Social touch has been studied extensively in psychology and neuroscience. With the development of new technologies, it is now possible to engage in social touch at a distance or engage in social touch with artificial social agents. Social touch research has inspired research into technology mediated social touch, and this line of research has found effects similar to actual social touch. The importance of haptic stimulus qualities, multimodal cues, and contextual factors in technology mediated social touch is discussed. This survey is concluded by reflecting on the current state of research into social touch technology, and providing suggestions for future research and applications.

Advanced Metering Infrastructure based on Smart Meters

NASA Astrophysics Data System (ADS)

Suzuki, Hiroshi

By specifically designating penetrations rates of advanced meters and communication technologies, devices and systems, this paper introduces that the penetration of advanced metering is important for the future development of electric power system infrastructure. It examines the state of the technology and the economical benefits of advanced metering. One result of the survey is that advanced metering currently has a penetration of about six percent of total installed electric meters in the United States. Applications to the infrastructure differ by type of organization. Being integrated with emerging communication technologies, smart meters enable several kinds of features such as, not only automatic meter reading but also distribution management control, outage management, remote switching, etc.

Integrated control and health monitoring capacitive displacement sensor development task. Orbit transfer rocket engine technology program

NASA Technical Reports Server (NTRS)

Collamore, Frank N.

1989-01-01

The development of a miniature multifunction turbomachinery shaft displacement sensor using state-of-the-art non-contract capacitive sensing technology is described. Axial displacement, radial displacement, and speed are sensed using a single probe within the envelope normally required for a single function. A survey of displacement sensing technology is summarized including inductive, capacitive, optical and ultrasonic techniques. The design and operation of an experimental triple function sensor is described. Test results are included showing calibration tests and simultaneous dynamic testing of multiple functions. Recommendations for design changes are made to improve low temperature performance, reliability, and for design of a flight type signal conditioning unit.

An Attitude Survey Analysis of CONUS Air Force Jet Propulsion Technicians Towards the Warranted Tool Program.

DTIC Science & Technology

1983-09-01

Reyer’s research 12 . I -’. .. - n -l l--" (11:1), of "scrounging" from another worker’s tool box. As a consequence, control and accounting procedures...PPOGPAM $ELEMENT. PROJECT, TASK School of Systems and Logistics APEA A WORK UNIT NUMBERS Air Force Institute of Technology, WPAFBO1 II. CONTROLLING ...thesis analyzes those attitudes by evaluating the collected data from the AFLMC questionnaire and this research team’s telephone interviews. The

A survey of new technology for cockpit application to 1990's transport aircraft simulators

NASA Technical Reports Server (NTRS)

Holt, A. P., Jr.; Noneaker, D. O.; Walthour, L.

1980-01-01

Two problems were investigated: inter-equipment data transfer, both on board the aircraft and between air and ground; and crew equipment communication via the cockpit displays and controls. Inter-equipment data transfer is discussed in terms of data bus and data link requirements. Crew equipment communication is discussed regarding the availability of CRT display systems for use in research simulators to represent flat panel displays of the future, and of software controllable touch panels.

Airborne laser mapping of Assateague National Seashore Beach

USGS Publications Warehouse

Krabill, W.B.; Wright, C.W.; Swift, R.N.; Frederick, E.B.; Manizade, S.S.; Yungel, J.K.; Martin, C.F.; Sonntag, J.G.; Duffy, Mark; Hulslander, William; Brock, John C.

2000-01-01

Results are presented from topographic surveys of the Assateague Island National Seashore using an airborne scanning laser altimeter and kinematic Global Positioning System (GPS) technology. The instrument used was the Airborne Topographic Mapper (ATM), developed by the NASA Arctic Ice Mapping (AIM) group from the Goddard Space Flight Center's Wallops Flight Facility. In November, 1995, and again in May, 1996, these topographic surveys were flown as a functionality check prior to conducting missions to measure the elevation of extensive sections of the Greenland Ice Sheet as part of NASA's Global Climate Change program. Differences between overlapping portions of both surveys are compared for quality control. An independent assessment of the accuracy of the ATM survey is provided by comparison to surface surveys which were conducted using standard techniques. The goal of these projects is to make these measurements to an accuracy of ± 10 cm. Differences between the fall 1995 and 1996 surveys provides an assessment of net changes in the beach morphology over an annual cycle.

Study of the uses of Information and Communication Technologies by Pain Treatment Unit Physicians.

PubMed

Muriel Fernandez, Jorge; Sánchez Ledesma, María José; López Millan, Manuel; García Cenador, María Begoña

2017-05-01

Adequate use of Information and Communication Technologies (ICTs) in health has been shown to save the patient and caregiver time, improve access to the health system, improve diagnosis and control of disease or treatment. All this results in cost savings, and more importantly, they help improve the quality of service and the lives of patients. The purpose of this study is to analyse the differences in the uses of this ICTs between those physicians that belong to Pain Treatment Units (PU) and other physicians that work in pain not linked to these PUs. An online survey, generated by Netquest online survey tool, was sent to both groups of professionals and the data collected was statistical analysed through a logistic regression methodology which is the Logit binomial model. Our results show that those physicians that belong to PUs use ICTs more frequently and consider it more relevant to their clinical practice.

Exploring the association between social capital and depressive symptoms: results of a survey in German information and communication technology companies.

PubMed

Jung, Julia; Ernstmann, Nicole; Nitzsche, Anika; Driller, Elke; Kowalski, Christoph; Lehner, Birgit; Stieler-Lorenz, Brigitte; Friepörtner, Katharina; Schmidt, Anna; Pfaff, Holger

2012-01-01

This study examines the association between social capital at work and depressive symptoms in employees. Data for this cross-sectional study were collected through an online survey with the full population of employees from six companies in the German information and communication technology sector (response rate: 58.4%). A multivariate logistic regression analysis was performed. Results of data from a total of 328 employees suggest that, after controlling for sociodemographic factors, health awareness, and job strain, lower levels of perceived social capital at work are associated with the experience of depressive symptoms (OR = 0.76; 95% CI: 0.64-0.90). Our findings suggest that characteristics of high social capital at work, such as an established environment of trust and a sense of common values and convictions, could be an essential resource for preventing depressive disorders.

Information Technology: A Survey from the Perspective of Higher Education.

ERIC Educational Resources Information Center

Van Houweling, Douglas E.

1986-01-01

Survey of the history and current development of information technology covers hardware (economies of scale, communications technology, magnetic and optical forms of storage), and the evolution of systems software ("tool" software, applications software, and nonprocedural languages). The effect of new computer technologies on human…

Student Use of Communication Technologies--Parent/Guardian Survey Report. Survey Research Center Report 2010/8

ERIC Educational Resources Information Center

Julka, Ashley; Stehr, Grady; Parks, Denise; Trechter, David

2010-01-01

The purpose of this study was to gain a better understanding of how middle school students and their parents are using technologies and what programs citizens of Wisconsin might need with respect to these technologies. During the month of February 2010, staff from the Survey Research Center (SRC) at the University of Wisconsin-River Falls, Lori…

Design And Control Of Agricultural Robot For Tomato Plants Treatment And Harvesting

NASA Astrophysics Data System (ADS)

Sembiring, Arnes; Budiman, Arif; Lestari, Yuyun D.

2017-12-01

Although Indonesia is one of the biggest agricultural country in the world, implementation of robotic technology, otomation and efficiency enhancement in agriculture process hasn’t extensive yet. This research proposed a low cost agricultural robot architecture. The robot could help farmer to survey their farm area, treat the tomato plants and harvest the ripe tomatoes. Communication between farmer and robot was facilitated by wireless line using radio wave to reach wide area (120m radius). The radio wave was combinated with Bluetooth to simplify the communication between robot and farmer’s Android smartphone. The robot was equipped with a camera, so the farmers could survey the farm situation through 7 inch monitor display real time. The farmers controlled the robot and arm movement through an user interface in Android smartphone. The user interface contains control icons that allow farmers to control the robot movement (formard, reverse, turn right and turn left) and cut the spotty leaves or harvest the ripe tomatoes.

Using information and communications technology in a national population-based survey: the Kenya AIDS Indicator Survey 2012.

PubMed

Ojwang', James K; Lee, Veronica C; Waruru, Anthony; Ssempijja, Victor; Ng'ang'a, John G; Wakhutu, Brian E; Kandege, Nicholas O; Koske, Danson K; Kamiru, Samuel M; Omondi, Kenneth O; Kakinyi, Mutua; Kim, Andrea A; Oluoch, Tom

2014-05-01

With improvements in technology, electronic data capture (EDC) for large surveys is feasible. EDC offers benefits over traditional paper-based data collection, including more accurate data, greater completeness of data, and decreased data cleaning burden. The second Kenya AIDS Indicator Survey (KAIS 2012) was a population-based survey of persons aged 18 months to 64 years. A software application was designed to capture the interview, specimen collection, and home-based testing and counseling data. The application included: interview translations for local languages; options for single, multiple, and fill-in responses; and automated participant eligibility determination. Data quality checks were programmed to automate skip patterns and prohibit outlier responses. A data sharing architecture was developed to transmit the data in real-time from the field to a central server over a virtual private network. KAIS 2012 was conducted between October 2012 and February 2013. Overall, 68,202 records for the interviews, specimen collection, and home-based testing and counseling were entered into the application. Challenges arose during implementation, including poor connectivity and a systems malfunction that created duplicate records, which prevented timely data transmission to the central server. Data cleaning was minimal given the data quality control measures. KAIS 2012 demonstrated the feasibility of using EDC in a population-based survey. The benefits of EDC were apparent in data quality and minimal time needed for data cleaning. Several important lessons were learned, such as the time and monetary investment required before survey implementation, the importance of continuous application testing, and contingency plans for data transmission due to connectivity challenges.

Integrated control and health management. Orbit transfer rocket engine technology program

NASA Technical Reports Server (NTRS)

Holzmann, Wilfried A.; Hayden, Warren R.

1988-01-01

To insure controllability of the baseline design for a 7500 pound thrust, 10:1 throttleable, dual expanded cycle, Hydrogen-Oxygen, orbit transfer rocket engine, an Integrated Controls and Health Monitoring concept was developed. This included: (1) Dynamic engine simulations using a TUTSIM derived computer code; (2) analysis of various control methods; (3) Failure Modes Analysis to identify critical sensors; (4) Survey of applicable sensors technology; and, (5) Study of Health Monitoring philosophies. The engine design was found to be controllable over the full throttling range by using 13 valves, including an oxygen turbine bypass valve to control mixture ratio, and a hydrogen turbine bypass valve, used in conjunction with the oxygen bypass to control thrust. Classic feedback control methods are proposed along with specific requirements for valves, sensors, and the controller. Expanding on the control system, a Health Monitoring system is proposed including suggested computing methods and the following recommended sensors: (1) Fiber optic and silicon bearing deflectometers; (2) Capacitive shaft displacement sensors; and (3) Hot spot thermocouple arrays. Further work is needed to refine and verify the dynamic simulations and control algorithms, to advance sensor capabilities, and to develop the Health Monitoring computational methods.

Seismic fiber optic multiplexed sensors for exploration and reservoir management

NASA Astrophysics Data System (ADS)

Houston, Mark H.

2000-12-01

Reliable downhole communications, control and sensor networks will dramatically improve oil reservoir management practices and will enable the construction of intelligent or smart-well completions. Fiber optic technology will play a key role in the implementation of these communication, control and sensing systems because of inherent advantages of power, weight and reliability over more conventional electronic-based systems. Field test data, acquired using an array of fiber optic seismic hydrophones within a steam-flood, heavy oil- production filed, showed a significant improvement (10X in this specific case) in subsurface resolution as compared to conventional surface seismic acquisition. These results demonstrate the viability of using multiplexed fiber optic sensors for exploration and reservoir management in 3D vertical seismic profiling (VSP) surveys and in permanent sensor arrays for 4D surveys.

Applied technology center business plan and market survey

NASA Technical Reports Server (NTRS)

Hodgin, Robert F.; Marchesini, Roberto

1990-01-01

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

Users speak out on technology deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, Mark; Prochaska, Marty; Cromer, Paul

2001-02-25

This report summarizes user feedback data collected during a recent Accelerated Site Technology Deployment (ASTD) project: the Fluor Fernald ASTD Technology Deployment Project from May, 1999 through September, 2000. The main goal of the ASTD project was to use the ''Fernald approach'' to expedite the deployment of new or innovative technologies with superior safety, cost, and/or productivity benefits to Department of Energy (DOE) facilities. The Fernald approach targets technology end-users and their managers and directly involves them with hands-on demonstrations of new or innovative technologies during technology transfer sessions. The two technologies deployed through this project were the Personal Icemore » Cooling System (PICS) and the oxy-gasoline torch. Participants of technology transfer sessions were requested to complete feedback surveys. Surveys evaluated the effectiveness of the Fernald approach to technology deployment and assessed the responsiveness of employees to new technologies. This report presents the results of those surveys.« less

Synthesis of Survey Questions That Accurately Discriminate the Elements of the TPACK Framework

ERIC Educational Resources Information Center

Jaikaran-Doe, Seeta; Doe, Peter Edward

2015-01-01

A number of validated survey instruments for assessing technological pedagogical content knowledge (TPACK) do not accurately discriminate between the seven elements of the TPACK framework particularly technological content knowledge (TCK) and technological pedagogical knowledge (TPK). By posing simple questions that assess technological,…

The Use of Technology by Nonformal Environmental Educators

ERIC Educational Resources Information Center

Peffer, Tamara Elizabeth; Bodzin, Alec M.; Smith, Judith Duffield

2013-01-01

This study examined the use of instructional and learning technologies by nonformal environmental educators. A 40-question survey was developed to inquire about practitioner demographics, technology use in practice, and beliefs about technology. The survey consisted of multiple choice, open-ended questions, and a Likert-type scale component--the…

SLJ's 2011 Technology Survey: Things Are Changing. Fast

ERIC Educational Resources Information Center

Kenney, Brian

2011-01-01

Despite the funding challenges nearly all school libraries face, many media specialists are optimistic about the role of technology in the school library, according to "School Library Journal's" ("SLJ") 2011 Technology Survey. But in spite of the general optimism, others point to some significant obstacles: technological innovations are often…

Advanced cogeneration research study. Survey of cogeneration potential

NASA Technical Reports Server (NTRS)

Slonski, M. L.

1983-01-01

Fifty-five facilities that consumed substantial amounts of electricity, natural gas, or fuel oil were surveyed by telephone in 1983. The primary objective of the survey was to estimate the potential electricity that could be generated in the SCE service territory using cogeneration technology. An estimated 3667 MW sub e could potentially be generated using cogenerated technology. Of this total, current technology could provide 2569 MW sub p and advanced technology could provide 1098 MW sub e. Approximately 1611 MW sub t was considered not feasible to produce electricity with either current or advanced cogeneration technology.

A Study of Special Education Teachers' Knowledge of Assistive Technology for Children with Reading Difficulties

ERIC Educational Resources Information Center

Sydeski, Randal T.

2013-01-01

This study investigated high school special education teachers' knowledge of assistive technology (AT) for students with reading difficulties in Southwestern Pennsylvania. A survey was disseminated via e-mail using the "SurveyMonkey" online survey tool to 201 special education teachers. The survey asked questions pertaining to the…

Survey of Compressed Video Applications: Higher Education, K-12, and the Private Sector, 1993.

ERIC Educational Resources Information Center

Cochenour, John; And Others

This paper presents the results of three surveys about live, two-way interactive video (compressed video) and discusses some possible trends in its use, applications, and technological development. Surveys are an Association for Educational Communications and Technology (AECT) survey that has not been completed; one from the "International…

Student Campus Technology Trends: 2001 versus 2006

ERIC Educational Resources Information Center

Crews, Tena B.; Brown, Herbert F.; Bray, Sandra; Pringle, Ernest M.

2007-01-01

Since 1999, students who reside in campus housing at the University of South Carolina have completed an annual residence hall computer and technology survey. More than 2,800 students completed surveys during the fall 2001 semester, and approximately 1,800 completed the survey in 2006. The survey has changed over the years to include questions…

OAST system technology planning

NASA Technical Reports Server (NTRS)

Sadin, S. R.

1978-01-01

The NASA Office of Aeronautics and Space Technology developed a planning model for space technology consisting of a space systems technology model, technology forecasts and technology surveys. The technology model describes candidate space missions through the year 2000 and identifies their technology requirements. The technology surveys and technology forecasts provide, respectively, data on the current status and estimates of the projected status of relevant technologies. These tools are used to further the understanding of the activities and resources required to ensure the timely development of technological capabilities. Technology forecasting in the areas of information systems, spacecraft systems, transportation systems, and power systems are discussed.

Railroad Classification Yard Technology : A Survey and Assessment

DOT National Transportation Integrated Search

1977-01-01

This report documents a survey and assessment of the current state of the art in rail freight-car classification yard technology. The major objective was the identification of research and development necessary for technological improvements in railr...

Campus Computing, 1998. The Ninth National Survey of Desktop Computing and Information Technology in American Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.

This report presents findings of a June 1998 survey of computing officials at 1,623 two- and four-year U.S. colleges and universities concerning the use of computer technology. The survey found that computing and information technology (IT) are now core components of the campus environment and classroom experience. However, key aspects of IT…

Requirements and Sizing Investigation for the Constellation Space Suit Portable Life Support System Trace Contaminant Control

NASA Technical Reports Server (NTRS)

Jennings, Mallory A.; Paul, Heather L.; Waguespack, Glenn M.

2010-01-01

This presentation summarized the results of a trade study that evaluated whether trace contaminant control within the Constellation Spacesuit PLSS could be achieved without a Trace Contaminant Control System (TCCS) by relying on suit leakage, ullage loss from the carbon dioxide and humidity control system, and other factors. Mallory Jennings and Dr. Glenn Waguespack studied trace contaminant generation rates to verify that values reflected the latest designs for Constellation spacesuit system pressure garment materials and PLSS hardware. They also calculated TCCS sizing and conducted a literature survey to review the latest developments in trace contaminant technologies.

Successful use of tablet personal computers and wireless technologies for the 2011 Nepal Demographic and Health Survey.

PubMed

Paudel, Deepak; Ahmed, Marie; Pradhan, Anjushree; Lal Dangol, Rajendra

2013-08-01

Computer-Assisted Personal Interviewing (CAPI), coupled with the use of mobile and wireless technology, is growing as a data collection methodology. Nepal, a geographically diverse and resource-scarce country, implemented the 2011 Nepal Demographic and Health Survey, a nationwide survey of major health indicators, using tablet personal computers (tablet PCs) and wireless technology for the first time in the country. This paper synthesizes responses on the benefits and challenges of using new technology in such a challenging environment from the 89 interviewers who administered the survey. Overall, feedback from the interviewers indicate that the use of tablet PCs and wireless technology to administer the survey demonstrated potential to improve data quality and reduce data collection time-benefits that outweigh manageable challenges, such as storage and transport of the tablet PCs during fieldwork, limited options for confidential interview space due to screen readability issues under direct sunlight, and inconsistent electricity supply at times. The introduction of this technology holds great promise for improving data availability and quality, even in a context with limited infrastructure and extremely difficult terrain.

Driver trust in five driver assistance technologies following real-world use in four production vehicles.

PubMed

Kidd, David G; Cicchino, Jessica B; Reagan, Ian J; Kerfoot, Laura B

2017-05-29

Information about drivers' experiences with driver assistance technologies in real driving conditions is sparse. This study characterized driver interactions with forward collision warning, adaptive cruise control, active lane keeping, side-view assist, and lane departure warning systems following real-world use. Fifty-four Insurance Institute for Highway Safety employees participated and drove a 2016 Toyota Prius, 2016 Honda Civic, 2017 Audi Q7, or 2016 Infiniti QX60 for up to several weeks. Participants reported mileage and warnings from the technologies in an online daily-use survey. Participants reported their level of agreement with five statements regarding trust in an online post-use survey. Responses were averaged to create a composite measure of trust ranging from -2 (strongly disagree) to +2 (strongly agree) for each technology. Mixed-effect regression models were constructed to compare trust among technologies and separately among the study vehicles. Participants' free-response answers about what they liked least about each system were coded and examined. Participants reported driving 33,584 miles during 4 months of data collection. At least one forward collision warning was reported in 26% of the 354 daily reports. The proportion of daily reports indicating a forward collision warning was much larger for the Honda (70%) than for the Audi (18%), Infiniti (15%), and Toyota (10%). Trust was highest for side-view assist (0.98) and lowest for active lane keeping (0.20). Trust in side-view assist was significantly higher than trust in active lane keeping and lane departure warning (0.53). Trust in active lane keeping was significantly lower than trust in adaptive cruise control (0.67) and forward collision warning (0.71). Trust in adaptive cruise control was higher for the Audi (0.72) and Toyota (0.75) compared with the Honda (0.30), and significantly higher for the Infiniti (0.93). Trust in Infiniti's side-view assist (0.58) was significantly lower than trust in Audi (1.17) and Honda (1.23) systems. Coding of answers to free-response questions showed that more than 80% of complaints about Honda's adaptive cruise control were about the way it functioned and/or performed. Infiniti's side-view assist was the only one with complaints mentioning circumstances where it was used. Trust in forward collision warning, lane departure warning, and active lane keeping was not significantly different among vehicles. Driver trust varied among driver assistance technologies, and trust in adaptive cruise control and side-view assist differed among vehicles. Trust may affect real-world use of driver assistance technologies and limit the opportunity for the systems to provide their intended benefits.

Implementing Audio-CASI on Windows’ Platforms

PubMed Central

Cooley, Philip C.; Turner, Charles F.

2011-01-01

Audio computer-assisted self interviewing (Audio-CASI) technologies have recently been shown to provide important and sometimes dramatic improvements in the quality of survey measurements. This is particularly true for measurements requiring respondents to divulge highly sensitive information such as their sexual, drug use, or other sensitive behaviors. However, DOS-based Audio-CASI systems that were designed and adopted in the early 1990s have important limitations. Most salient is the poor control they provide for manipulating the video presentation of survey questions. This article reports our experiences adapting Audio-CASI to Microsoft Windows 3.1 and Windows 95 platforms. Overall, our Windows-based system provided the desired control over video presentation and afforded other advantages including compatibility with a much wider array of audio devices than our DOS-based Audio-CASI technologies. These advantages came at the cost of increased system requirements --including the need for both more RAM and larger hard disks. While these costs will be an issue for organizations converting large inventories of PCS to Windows Audio-CASI today, this will not be a serious constraint for organizations and individuals with small inventories of machines to upgrade or those purchasing new machines today. PMID:22081743

STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

NASA Astrophysics Data System (ADS)

Crenshaw, Mark VanBuren

This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

A preliminary study of current multimedia information technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, J.C.

1997-03-01

This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

#2) Sensor Technology-State of the Science

EPA Science Inventory

Establish market surveys of commercially-available air quality sensorsConduct an extensive literature survey describing the state of sensor technologiesInvestigate emerging technologies and their potential to meet future air quality monitoring needs for the Agency as well as othe...

Track and track-side video survey technology development.

DOT National Transportation Integrated Search

2015-05-01

Researchers at HiDef/Createc have completed prototype development and testing of a novel track video surveying technology : called Track and Track-Side Video Survey (TTVS). TTVS is designed to capture clear video images of the track and track side : ...

Solar Sail Roadmap Mission GN and C Challenges

NASA Technical Reports Server (NTRS)

Heaton, Andrew F.

2005-01-01

The NASA In-Space Propulsion program is funding development work for solar sails to enhance future scientific opportunities. Key to this effort are scientific solar sail roadmap missions identified by peer review. The two near-term missions of interest are L1 Diamond and Solar Polar Imager. Additionally, the New Millennium Program is sponsoring the Space Technology 9 (ST9) demonstration mission. Solar sails are one of five technologies competing for the ST9 flight demonstration. Two candidate solar sail missions have been identified for a potential ST9 flight. All the roadmap missions and candidate flight demonstration missions face various GN&C challenges. A variety of efforts are underway to address these challenges. These include control actuator design and testing, low thrust optimization studies, attitude control system design and modeling, control-structure interaction studies, trajectory control design, and solar radiation pressure model development. Here we survey the various efforts underway and identify a few of specific recent interest and focus.

Proceedings of the Workshop on Space Telerobotics, volume 1

NASA Technical Reports Server (NTRS)

Rodriguez, G. (Editor)

1987-01-01

These proceedings report the results of a workshop on space telerobotics, which was held at the Jet Propulsion Laboratory, January 20-22, 1987. Sponsored by the NASA Office of Aeronautics and Space Technology (OAST), the Workshop reflected NASA's interest in developing new telerobotics technology for automating the space systems planned for the 1990s and beyond. The workshop provided a window into NASA telerobotics research, allowing leading researchers in telerobotics to exchange ideas on manipulation, control, system architectures, artificial intelligence, and machine sensing. One of the objectives was to identify important unsolved problems of current interest. The workshop consisted of surveys, tutorials, and contributed papers of both theoretical and practical interest. Several sessions were held on the themes of sensing and perception, control execution, operator interface, planning and reasoning, and system architecture.

Teachers' Purposeful Design of Effective Technology Learning Activities

ERIC Educational Resources Information Center

Morgan, John Andrew Kerlin

2014-01-01

The goal of this study was to explore how exemplary teachers design learning activities that incorporate the use of technology. Teachers at three schools in a school district in Southern California were solicited for a survey regarding their use of technology in the classroom. Based on the surveys, high and low technology implementers were…

The Effect of Principals' Technological Leadership on Teachers' Technological Literacy and Teaching Effectiveness in Taiwanese Elementary Schools

ERIC Educational Resources Information Center

Chang, I-Hua

2012-01-01

The purpose of this study is to investigate the relationships among principals' technological leadership, teachers' technological literacy, and teaching effectiveness. The survey target population consists of 1,000 teachers randomly selected from Taiwanese elementary schools. The survey asked teachers to measure the effectiveness of principals'…

Skill-Biased Technological Change. Evidence from a Firm-Level Survey.

ERIC Educational Resources Information Center

Siegel, Donald S.

A study addressed the effects of technological change using a new, rich source of firm-level data on technology usage and labor force composition. The empirical investigation is based on a survey of Long Island manufacturers' usage of computer-integrated manufacturing systems (CIMS) or advanced manufacturing technologies (AMTs). The study also…

High Technology Technical Training Needs Assessment. Final Report 1983-84.

ERIC Educational Resources Information Center

Middlesex County Coll., Edison, NJ.

A project sought to produce adequate data on high technology training needs in New Jersey's Middlesex County College's service area. Of 168 individuals at high technology companies who were sent surveys, 52 returned usable surveys. Respondents supplied information on the impact of high technology on the company over the next five years, the…

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

PubMed

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

Preschool teachers' perception and use of hearing assistive technology in educational settings.

PubMed

Nelson, Lauri H; Poole, Bridget; Muñoz, Karen

2013-07-01

This study explored how often sound-field amplification and personal frequency-modulated (FM) systems are used in preschool classrooms, teacher perceptions of advantages and disadvantages of using hearing assistive technology, and teacher recommendations for hearing assistive technology use. The study used a cross-sectional survey design. Participants were professionals who provided services to preschool-age children who are deaf or hard of hearing in public or private schools. A total of 306 surveys were sent to 162 deaf education programs throughout the United States; 99 surveys were returned (32%). Simple statistics were used to describe the quantitative survey results; content analysis was completed on open-ended survey comments. Surveys were received from teachers working at listening and spoken language preschool programs (65%) and at bilingual-bicultural and total communication preschool programs (35%). Most respondents perceived that hearing assistive technology improved students' academic performance, speech and language development, behavior, and attention in the classroom. The majority of respondents also reported that they definitely would or probably would recommend a sound-field system (77%) or personal FM system (71%) to other educators. Hearing assistive technology is frequently used in preschool classrooms of children who are deaf or hard of hearing, with generally positive teacher perceptions of the benefits of using such technology.

Learning the Hard Way? Issues in the Adoption of New Technology in Small Technology Oriented Firms

ERIC Educational Resources Information Center

Chibelushi, Caroline

2008-01-01

Purpose: The purpose of this paper is to explore, through a survey and two short case studies, the issues smaller firms face with the adoption of new technologies. Design/methodology/approach: A survey of the pressures to adopt new technologies and the existence of specialist technology skills was conducted of small ICT oriented firms in the West…

Development and Implementation of Culturally Tailored Offline Mobile Health Surveys.

PubMed

McIntosh, Scott; Pérez-Ramos, José; Demment, Margaret M; Vélez Vega, Carmen; Avendaño, Esteban; Ossip, Deborah J; Dye, Timothy D

2016-06-02

In low and middle income countries (LMICs), and other areas with low resources and unreliable access to the Internet, understanding the emerging best practices for the implementation of new mobile health (mHealth) technologies is needed for efficient and secure data management and for informing public health researchers. Innovations in mHealth technology can improve on previous methods, and dissemination of project development details and lessons learned during implementation are needed to provide lessons learned to stakeholders in both the United States and LMIC settings. The aims of this paper are to share implementation strategies and lessons learned from the development and implementation stages of two survey research projects using offline mobile technology, and to inform and prepare public health researchers and practitioners to implement new mobile technologies in survey research projects in LMICs. In 2015, two survey research projects were developed and piloted in Puerto Rico and pre-tested in Costa Rica to collect face-to-face data, get formative evaluation feedback, and to test the feasibility of an offline mobile data collection process. Fieldwork in each setting involved survey development, back translation with cultural tailoring, ethical review and approvals, data collector training, and piloting survey implementation on mobile tablets. Critical processes and workflows for survey research projects in low resource settings were identified and implemented. This included developing a secure mobile data platform tailored to each survey, establishing user accessibility, and training and eliciting feedback from data collectors and on-site LMIC project partners. Formative and process evaluation strategies are necessary and useful for the development and implementation of survey research projects using emerging mHealth technologies in LMICs and other low resource settings. Lessons learned include: (1) plan institutional review board (IRB) approvals in multiple countries carefully to allow for development, implementation, and feedback, (2) in addition to testing the content of survey instruments, allow time and consideration for testing the use of novel mHealth technology (hardware and software), (3) incorporate training for and feedback from project staff, LMIC partner staff, and research participants, and (4) change methods accordingly, including content, as mHealth technology usage influences and is influenced by the content and structure of the survey instrument. Lessons learned from early phases of LMIC research projects using emerging mHealth technologies are critical for informing subsequent research methods and study designs.

Hospital adoption of medical technology: an empirical test of alternative models.

PubMed Central

Teplensky, J. D.; Pauly, M. V.; Kimberly, J. R.; Hillman, A. L.; Schwartz, J. S.

1995-01-01

OBJECTIVE. This study examines hospital motivations to acquire new medical technology, an issue of considerable policy relevance: in this case, whether, when, and why hospitals acquire a new capital-intensive medical technology, magnetic resonance imaging equipment (MRI). STUDY DESIGN. We review three common explanations for medical technology adoption: profit maximization, technological preeminence, and clinical excellence, and incorporate them into a composite model, controlling for regulatory differences, market structures, and organizational characteristics. All four models are then tested using Cox regressions. DATA SOURCES. The study is based on an initial sample of 637 hospitals in the continental United States that owned or leased an MRI unit as of 31 December 1988, plus nonadopters. Due to missing data the final sample consisted of 507 hospitals. The data, drawn from two telephone surveys, are supplemented by the AHA Survey, census data, and industry and academic sources. PRINCIPAL FINDING. Statistically, the three individual models account for roughly comparable amounts of variance in past adoption behavior. On the basis of explanatory power and parsimony, however, the technology model is "best." Although the composite model is statistically better than any of the individual models, it does not add much more explanatory power adjusting for the number of variables added. CONCLUSIONS. The composite model identified the importance a hospital attached to being a technological leader, its clinical requirements, and the change in revenues it associated with the adoption of MRI as the major determinants of adoption behavior. We conclude that a hospital's adoption behavior is strongly linked to its strategic orientation. PMID:7649751

Nanowire systems: technology and design

PubMed Central

Gaillardon, Pierre-Emmanuel; Amarù, Luca Gaetano; Bobba, Shashikanth; De Marchi, Michele; Sacchetto, Davide; De Micheli, Giovanni

2014-01-01

Nanosystems are large-scale integrated systems exploiting nanoelectronic devices. In this study, we consider double independent gate, vertically stacked nanowire field effect transistors (FETs) with gate-all-around structures and typical diameter of 20 nm. These devices, which we have successfully fabricated and evaluated, control the ambipolar behaviour of the nanostructure by selectively enabling one type of carriers. These transistors work as switches with electrically programmable polarity and thus realize an exclusive or operation. The intrinsic higher expressive power of these FETs, when compared with standard complementary metal oxide semiconductor technology, enables us to realize more efficient logic gates, which we organize as tiles to realize nanowire systems by regular arrays. This article surveys both the technology for double independent gate FETs as well as physical and logic design tools to realize digital systems with this fabrication technology. PMID:24567471

75 FR 80830 - Proposed Collection; Comment Request; Technology Transfer Center External Customer Satisfaction...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... Request; Technology Transfer Center External Customer Satisfaction Survey (NCI) SUMMARY: In compliance...: Technology Transfer Center External Customer Satisfaction Survey (NCI). Type of Information Collection...: Obtain information on the satisfaction of TTC's external customers with TTC customer services; collect...

Student Interest in Technology and Science (SITS) Survey: Development, Validation, and Use of a New Instrument

ERIC Educational Resources Information Center

Romine, William; Sadler, Troy D.; Presley, Morgan; Klosterman, Michelle L.

2014-01-01

This study presents the systematic development, validation, and use of a new instrument for measuring student interest in science and technology. The Student Interest in Technology and Science (SITS) survey is composed of 5 sub-sections assessing the following dimensions: interest in learning science, using technology to learn science, science…

The Development of Technology Enhanced Learning: Findings from a 2008 Survey of UK Higher Education Institutions

ERIC Educational Resources Information Center

Jenkins, Martin; Browne, Tom; Walker, Richard; Hewitt, Roger

2011-01-01

This article summarises the key findings from a UK survey of higher education institutions, focusing on the development of technology enhanced learning (TEL). TEL is defined as any online facility or system that directly supports learning and teaching. The 2008 survey builds upon previous UCISA surveys conducted in 2001, 2003 and 2005 and for…

Assessing the Impact and Effectiveness of the Advanced Technological Education (ATE) Program. 2004 Survey Results. Volume I: Evaluation of the ATE Program Design

ERIC Educational Resources Information Center

Hanssen, Carl E.; Gullickson, Arlen R.

2004-01-01

This report presents results from the fifth annual survey of Advanced Technological Education (ATE) projects, centers, and articulation partnerships. ATE has approximately 220 active awards. Of these, 163 ATE-funded projects, centers, and articulation partnerships were asked to participate in the 2004 survey. During the survey administration…

Walk-through survey report: Control technology for metal reclamation industries at Exide/General Battery Corporation, Reading, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, R.M.

1994-03-30

A walk through survey was made at Exide/General Battery Corporation, Reading, Pennsylvania to identify and evaluate control methods to reduce lead exposure. About 20,000 to 25,000 batteries a day were recycled, primarily automobile batteries. Lead and plastic from the batteries were reclaimed. The company used local exhaust ventilation, enclosed ventilated booths, partial enclosures, and automated operations throughout production areas of the site. Various occupational safety and health programs were in place including occupational and safety training, a respiratory protection program, various hygiene programs, and blood lead monitoring programs. These findings will be compared with those from other sites and themore » facility with the lowest lead exposure levels will be examined carefully so that others may be brought in line with the best of standards.« less

Using Information and Communications Technology in a National Population-Based Survey: The Kenya AIDS Indicator Survey 2012

PubMed Central

Ojwang’, James K.; Lee, Veronica C.; Waruru, Anthony; Ssempijja, Victor; Ng’ang’a, John G.; Wakhutu, Brian E.; Kandege, Nicholas O.; Koske, Danson K.; Kamiru, Samuel M.; Omondi, Kenneth O.; Kakinyi, Mutua; Kim, Andrea A.; Oluoch, Tom

2016-01-01

Background With improvements in technology, electronic data capture (EDC) for large surveys is feasible. EDC offers benefits over traditional paper-based data collection, including more accurate data, greater completeness of data, and decreased data cleaning burden. Methods The second Kenya AIDS Indicator Survey (KAIS 2012) was a population-based survey of persons aged 18 months to 64 years. A software application was designed to capture the interview, specimen collection, and home-based testing and counseling data. The application included: interview translations for local languages; options for single, multiple, and fill-in responses; and automated participant eligibility determination. Data quality checks were programmed to automate skip patterns and prohibit outlier responses. A data sharing architecture was developed to transmit the data in realtime from the field to a central server over a virtual private network. Results KAIS 2012 was conducted between October 2012 and February 2013. Overall, 68,202 records for the interviews, specimen collection, and home-based testing and counseling were entered into the application. Challenges arose during implementation, including poor connectivity and a systems malfunction that created duplicate records, which prevented timely data transmission to the central server. Data cleaning was minimal given the data quality control measures. Conclusions KAIS 2012 demonstrated the feasibility of using EDC in a population-based survey. The benefits of EDC were apparent in data quality and minimal time needed for data cleaning. Several important lessons were learned, such as the time and monetary investment required before survey implementation, the importance of continuous application testing, and contingency plans for data transmission due to connectivity challenges. PMID:24732816

Low aerial imagery - an assessment of georeferencing errors and the potential for use in environmental inventory

NASA Astrophysics Data System (ADS)

Smaczyński, Maciej; Medyńska-Gulij, Beata

2017-06-01

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth's surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

Technology Integration through Professional Learning Community

ERIC Educational Resources Information Center

Cifuentes, Lauren; Maxwell, Gerri; Bulu, Sanser

2011-01-01

We describe efforts to build a learning community to support technology integration in three rural school districts and the contributions of various program strategies toward teacher growth. The Stages of Adoption Inventory, classroom observations, the Questionnaire for Technology Integration, interviews, STAR evaluation surveys, a survey of…

Personal technology use by U.S. military service members and veterans: an update.

PubMed

Bush, Nigel E; Wheeler, William M

2015-04-01

Although personal electronic devices, such as mobile phones, computers, and tablets, increasingly are being leveraged as vehicles for health in the civilian world, almost nothing is known about personal technology use in the U.S. military. In 2012 we conducted a unique survey of personal technologies used by U.S. military service members. However, with the rapidly growing sophistication of personal technology and changes in consumer habits, that knowledge must be continuously updated to be useful. Accordingly, we recently surveyed new samples of active duty service members, National Guard and Reserve, and veterans. We collected data by online surveys in 2013 from 239 active, inactive, and former service members. Online surveys were completed in-person via laptop computers at a large military installation and remotely via Web-based surveys posted on the Army Knowledge Online Web site and on a Defense Center Facebook social media channel. We measured high rates of personal technology use by service members at home across popular electronic media. The most dramatic change since our earlier survey was the tremendous increase in mobile phone use at home for a wide variety of purposes. Participants also reported moderate non-work uses of computers and tablets while on recent deployment to Iraq and Afghanistan, but almost no mobile phone use, ostensibly because of military restrictions in the war zone. These latest results will enable researchers and technology developers target their efforts on the most promising and popular technologies for psychological health in the military.

Essential Power Systems Workshop - OEM Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Gouse

2001-12-12

In California, idling is largely done for climate control. This suggests that climate control devices alone could be used to reduce idling. Line-haul truck drivers surveyed require an average of 4-6 kW of power for a stereo, CB radio, light, refrigerator, and climate control found in the average truck. More power may likely be necessary for peak power demands. The amount of time line-haul trucks reported to have stopped is between 25 and 30 hours per week. It was not possible to accurately determine from the pilot survey the location, purpose, and duration of idling. Consulting driver logs or electronicallymore » monitoring trucks could yield more accurate data, including seasonal and geographic differences. Truck drivers were receptive to idling alternatives. Two-thirds of truck drivers surveyed support a program to reduce idling. Two-thirds of drivers reported they would purchase idling reduction technologies if the technology yielded a payback period of two years or less. Willingness to purchase auxiliary power units appears to be higher for owner-operators than for company drivers. With a 2-year payback period, 82% of owner- operators would be willing to buy an idle- reducing device, while 63% of company drivers thought their company would do the same. Contact with companies is necessary to discern whether this difference between owner- operators and companies is true or simply due to the perception of the company drivers. Truck stops appear to be a much more attractive option for electrification than rest areas by a 48% to 21% margin. Much of this discrepancy may be due to perceived safety problems with rest areas. This survey did not properly differentiate between using these areas for breaks or overnight. The next, full survey will quantify where the truck drivers are staying overnight, where they go for breaks, and the duration of time they spend at each place. The nationwide survey, which is in progress, will indicate how applicable the results are to the US in general. In addition to the survey, we believe data loggers and focus groups will be necessary to collect the idling duration and location data necessary to compare auxiliary power units to truck stop electrification. Focus groups are recommended to better understand the driver response to APUs and electrification. The appearance and perception of the new systems will need further clarification, which could be accomplished with a demonstration for truck drivers.« less

Aquatic Plant Control Research Program. Alligatorweed Survey of Ten Southern States

DTIC Science & Technology

1988-04-01

Environmental Labora- tory (EL), US Army Engineer Waterways Experiment Station (WES). The author extends appreciation to Dr. Dana Sanders and Messrs. Edwin A...the WES Information Technology Laboratory. This study was conducted under the direct supervision of Mr. Edwin A. Theriot and Dr. Hanley K. Smith, Chief...agents producing in your area? ................................................... 22 0 10 Site 2--Steenson Hollow (Wilson Lake, Colbert County

75 FR 41244 - Proposed Collection; Request for Comments on an Existing Information Collection: (OMB Control No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

... No. 3206-0032; RI 25-14), is used to survey survivor annuitants who are between the ages of 18 and 22... other forms of information technology. We estimate 14,000 RI 25-14s will be processed annually. We estimate it takes approximately 12 minutes to complete the form. The estimated annual burden is 2,800 hours...

Bioterrorism Preparedness for Infectious Disease

DTIC Science & Technology

2005-01-01

outbreak. The PDC was asked to use its Geographical Information System (GIS) and Global Positioning System (GPS) technology and capabilities to perform data...improvements in the health system . For example, on May 10, 2002, the Hawaii State Department of Health unveiled plans for its long-term dengue fever...management strategy. The plan included a long-term dengue surveillance system statewide, a statewide mosquito population survey, and ongoing vector control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edgar, Thomas W.; Hadley, Mark D.; Manz, David O.

This document provides the methods to secure routable control system communication in the electric sector. The approach of this document yields a long-term vision for a future of secure communication, while also providing near term steps and a roadmap. The requirements for the future secure control system environment were spelled out to provide a final target. Additionally a survey and evaluation of current protocols was used to determine if any existing technology could achieve this goal. In the end a four-step path was described that brought about increasing requirement completion and culminates in the realization of the long term vision.

A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

PubMed

Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

2008-01-01

The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

ERIC Educational Resources Information Center

Brewer, Sally; Milam, Peggy

2006-01-01

This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

Teaching about Science, Technology, and Society in the Social Studies.

ERIC Educational Resources Information Center

Piel, Joe

1979-01-01

Presents two elementary and two secondary teaching strategies related to food and energy as global issues. Includes making a survey on energy use, an exercise about food, society, and technology, an energy and a water survey, and discussion and experiments concerning food and technology. (CK)

Technology Expands in New York State Schools.

ERIC Educational Resources Information Center

Technology Applications Quarterly, 1990

1990-01-01

The results of two statewide surveys, the fall 1989 Basic Educational Data System (BEDS) survey and surveys of school district use of the services at the Board of Cooperative Educational Services (BOCES) Regional Information and Computer Centers, dramatically underscore the continued expansion and use of technology for instructional and management…

Development and Validation of the Educational Technologist Multimedia Competency Survey

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.; Martin, Florence

2014-01-01

The purpose of this research study was to identify the multimedia competencies of an educational technologist by creating a valid and reliable survey instrument to administer to educational technology professionals. The educational technology multimedia competency survey developed through this research is based on a conceptual framework that…

Advanced Technological Education Survey 2012 Fact Sheet

ERIC Educational Resources Information Center

Wingate, Lori; Smith, Corey; Westine, Carl; Gullickson, Arlen

2012-01-01

This fact sheet summarizes data gathered in the 2012 survey of National Science Foundation (NSF) Advanced Technological Education (ATE) grant recipients. Conducted by EvaluATE, the evaluation resource center for the ATE program located at The Evaluation Center at Western Michigan University, this was the thirteenth annual survey of ATE projects…

Advanced Technological Education Survey 2009 Fact Sheet

ERIC Educational Resources Information Center

Wingate, Lori; Gullickson, Arlen

2009-01-01

This fact sheet summarizes data gathered in the 2009 survey of National Science Foundation (NSF) Advanced Technological Education (ATE) grant recipients. Conducted by The Evaluation Center at Western Michigan University, this was the tenth annual survey of ATE projects and centers. Included here are statistics about the program's grantees and…

Advanced Technological Education Program 2008 Survey Fact Sheet

ERIC Educational Resources Information Center

Gullickson, Arlen R.; Wingate, Lori A.

2008-01-01

This fact sheet summarizes data gathered in the 2008 survey of National Science Foundation (NSF) Advanced Technological Education (ATE) grant recipients. Conducted by The Evaluation Center at Western Michigan University, this was the ninth annual survey of ATE projects and centers. Included here are statistics about the program's grantees and…

Advanced Technological Education Survey 2011 Fact Sheet

ERIC Educational Resources Information Center

Wingate, Lori; Westine, Carl; Gullickson, Arlen

2011-01-01

This fact sheet summarizes data gathered in the 2011 survey of National Science Foundation (NSF) Advanced Technological Education (ATE) grant recipients. Conducted by EvaluATE, the evaluation resource center for the ATE program located at The Evaluation Center at Western Michigan University, this was the twelfth annual survey of ATE projects and…

Advanced Technological Education Survey 2010 Fact Sheet

ERIC Educational Resources Information Center

Wingate, Lori; Westine, Carl; Gullickson, Arlen

2010-01-01

This fact sheet summarizes data gathered in the 2010 survey of National Science Foundation (NSF) Advanced Technological Education (ATE) grant recipients. Conducted by EvaluATE, the evaluation resource center for the ATE program located at The Evaluation Center at Western Michigan University, this was the eleventh annual survey of ATE projects and…

Sensor Acquisition for Water Utilities: A Survey and Technology List

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alai, M; Glascoe, L; Love, A

2005-03-07

The early detection of the deliberate biological and chemical contamination of water distribution systems is a necessary capability for securing the nation's water supply. Current and emerging early-detection technology capabilities and shortcomings need to be identified and assessed to provide government agencies and water utilities with an improved methodology for assessing the value of installing these technologies. The Department of Homeland Security (DHS) has tasked a multi-laboratory team to evaluate current and future needs to protect the nation's water distribution infrastructure by supporting an objective evaluation of current and new technologies. The primary deliverables from this Operational Technology Demonstration (OTD)more » are the following: (1) establishment of an advisory board for review and approval of testing protocols, technology acquisition processes and recommendations for technology test and evaluation in laboratory and field settings; (2) development of a technology acquisition process; (3) creation of laboratory and field testing and evaluation capability; and (4) testing of candidate technologies for insertion into a water early warning system. The initial phase of this study involves the development of two separate but complementary strategies to be reviewed by the advisory board: (1) a technology acquisition strategy, and (2) a technology evaluation strategy. Lawrence Livermore National Laboratory and Sandia National Laboratories are tasked with the first strategy, while Los Alamos, Pacific Northwest, and Oak Ridge National Laboratories are tasked with the second strategy. The first goal of the acquisition strategy is the development of a technology survey process that includes a review of previous sensor surveys and current test programs and then the development of a method to solicit and select existing and emerging sensor technologies for evaluation and testing. In this paper we discuss a survey of previous efforts by governmental agencies and private companies with the aim of facilitating a water sensor technology acquisition procedure. We provide a survey of previous sensor studies with regard to the use of Early Warning Systems (EWS) including earlier surveys, testing programs, and response studies. In the project we extend this earlier work by developing a list of important sensor specifications that are then used to help assemble a sensor selection criteria. A list of sensor technologies with their specifications is appended to this document. This list will assist the second goal of the project which is a recommendation of candidate technologies for laboratory and field testing.« less

Intelligent fault diagnosis and failure management of flight control actuation systems

NASA Technical Reports Server (NTRS)

Bonnice, William F.; Baker, Walter

1988-01-01

The real-time fault diagnosis and failure management (FDFM) of current operational and experimental dual tandem aircraft flight control system actuators was investigated. Dual tandem actuators were studied because of the active FDFM capability required to manage the redundancy of these actuators. The FDFM methods used on current dual tandem actuators were determined by examining six specific actuators. The FDFM capability on these six actuators was also evaluated. One approach for improving the FDFM capability on dual tandem actuators may be through the application of artificial intelligence (AI) technology. Existing AI approaches and applications of FDFM were examined and evaluated. Based on the general survey of AI FDFM approaches, the potential role of AI technology for real-time actuator FDFM was determined. Finally, FDFM and maintainability improvements for dual tandem actuators were recommended.

Academic integrity in the online learning environment for health sciences students.

PubMed

Azulay Chertok, Ilana R; Barnes, Emily R; Gilleland, Diana

2014-10-01

The online learning environment not only affords accessibility to education for health sciences students, but also poses challenges to academic integrity. Technological advances contribute to new modes of academic dishonesty, although there may be a lack of clarity regarding behaviors that constitute academic dishonesty in the online learning environment. To evaluate an educational intervention aimed at increasing knowledge and improving attitudes about academic integrity in the online learning environment among health sciences students. A quasi-experimental study was conducted using a survey of online learning knowledge and attitudes with strong reliability that was developed based on a modified version of a previously developed information technology attitudes rating tool with an added knowledge section based on the academic integrity statement. Blended-learning courses in a university health sciences center. 355 health sciences students from various disciplines, including nursing, pre-medical, and exercise physiology students, 161 in the control group and 194 in the intervention group. The survey of online learning knowledge and attitudes (SOLKA) was used in a pre-post test study to evaluate the differences in scores between the control group who received the standard course introduction and the intervention group who received an enhanced educational intervention about academic integrity during the course introduction. Post-intervention attitude scores were significantly improved compared to baseline scores for the control and intervention groups, indicating a positive relationship with exposure to the information, with a greater improvement among intervention group participants (p<0.001). There was a significant improvement in the mean post-intervention knowledge score of the intervention group compared to the control group (p=0.001). Recommendations are provided for instructors in promoting academic integrity in the online environment. Emphasis should be made about the importance of academic integrity in the online learning environment in preparation for professional behavior in the technologically advancing health sciences arena. Copyright © 2013 Elsevier Ltd. All rights reserved.

Benefits, Challenges, and Perceptions of the Multiple Article Dissertation Format in Instructional Technology

ERIC Educational Resources Information Center

Thomas, Rebecca Arlene; West, Richard E.; Rich, Peter

2016-01-01

This study used survey data to investigate the benefits, challenges, perceptions, and current practices of the multiple article dissertation format in instructional technology. Online surveys were sent to current students, alumni, faculty, and department representatives of instructional technology programs, and data were analysed using qualitative…

Sustainable Technology: Community Surveys of Requisite Skills, Spring 2000.

ERIC Educational Resources Information Center

Pezzoli, Jean A.; Ainsworth, Don

The goal of this study was to obtain feedback from relevant community businesses regarding skills needed by employees in Sustainable Technologies. Survey results will help design the innovative Sustainable Technologies curriculum, which is under development at the Maui Community College. In the fall 1999 semester, the Sustainable Technologies…

Maryland Community Colleges Technology Needs Assessment Survey. Final Technical Report.

ERIC Educational Resources Information Center

Clagett, Craig A.

In 1997, the Maryland Community Colleges Technology Council (MCCTC) undertook a survey of the state's 18 community colleges to assess the status of instructional and administrative technologies and their needs for improvement for the following 5 years. Fifteen-page questionnaires were sent to the colleges requesting information on instructional…

Food Safety Practices in the Egg Products Industry.

PubMed

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

Using residents' worries about technology as a way of resolving environmental remediation dilemmas.

PubMed

Prior, Jason; Hubbard, Phil; Rai, Tapan

2017-02-15

The choice of technologies used to remediate contaminated environments are increasingly made via engagement with affected local residents. Despite this, little is known about how residents perceive remediation technology applications. Building on the findings of broader technology worry research, and drawing on data from a telephone survey of 2009 residents living near thirteen contaminated sites in Australia, regression analysis of closed-ended survey questions and coding analysis of open-ended survey questions are combined to identify the main predictors of worries concerning particular remediation technologies, and how worry affects them. This suggests respondents are more worried about the application of chemical remediation technologies than the application of physical and thermal technologies, which in turn caused more worry than the application of biotechnology. The paper suggests that these worries can be reduced via direct engagement with residents about remediation technologies, suggesting that such engagement can provide knowledge that improves remediation technology decisions. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of Computer-Assisted Learning on Students' Dental Anatomy Waxing Performance.

PubMed

Kwon, So Ran; Hernández, Marcela; Blanchette, Derek R; Lam, Matthew T; Gratton, David G; Aquilino, Steven A

2015-09-01

The aim of this study was to evaluate the impact of computer-assisted learning on first-year dental students' waxing abilities and self-evaluation skills. Additionally, this study sought to determine how well digital evaluation software performed compared to faculty grading with respect to students' technical scores on a practical competency examination. First-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=19). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Five outcomes were measured: visual assessment score, self-evaluation score, and digital assessment scores at 0.25 mm, 0.30 mm, and 0.35 mm tolerance. The scores from visual assessment and self-evaluation were examined for differences among groups using the Kruskal-Wallis test. Correlation between the visual assessment and digital scores was measured using Pearson and Spearman rank correlation coefficients. At completion of the course, students were asked to complete a survey on the use of these digital technologies. All 79 students in the first-year class participated in the study, for a 100% response rate. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). Analysis of survey responses completed by students in the technology groups showed that profiles for the two groups were similar and not favorable towards digital technology. The study concluded that technology-assisted training did not affect these students' waxing performance or self-evaluation skills and that visual scores given by faculty and digital assessment scores correlated moderately.

Integrated synoptic surveys using an autonomous underwater vehicle and manned boats

USGS Publications Warehouse

Jackson, P. Ryan

2013-01-01

Traditional surface-water surveys are being combined with autonomous technology to produce integrated surveys of bathymetry, water quality, and velocity in inland lakes and reservoirs. This new technology provides valuable, high-resolution, integrated data that allow a systems-based approach to understanding common environmental problems. This fact sheet presents several example applications of integrated surveys within inland lakes and coastal Lake Michigan and Lake Erie.

[The historical meaning of serological surveys as a laboratory technology applied to the immunization campaigns. The case of poliomyelitis in Spain].

PubMed

Ballester, Rosa; Porras, María-Isabel

2009-01-01

The aim of the paper is to analyse the introduction, use and diffusion of the serological surveys, a public health technology on the borderline between epidemiology and laboratory, in connection with poliomyelitis in Spain during the Francoism period. Within the framework of the "new history" of medical technologies and innovations, the serological surveys played an important role both in the improvement of knowledge on socio-demographic distribution and the health politics arena.

Survey of cogeneration: Advanced cogeneration research study

NASA Technical Reports Server (NTRS)

Slonski, M. L.

1983-01-01

The consumption of electricity, natural gas, or fuel oil was surveyed. The potential electricity that could be generated in the SCE service territory using cogeneration technology was estimated. It was found that an estimated 3700 MWe could potentially be generated in Southern California using cogenerated technology. It is suggested that current technology could provide 2600 MWe and advanced technology could provide 1100 MWe. Approximately 1600 MWt is considered not feasible to produce electricity with either current or advanced cogeneration technology.

A survey of enabling technologies in synthetic biology

PubMed Central

2013-01-01

Background Realizing constructive applications of synthetic biology requires continued development of enabling technologies as well as policies and practices to ensure these technologies remain accessible for research. Broadly defined, enabling technologies for synthetic biology include any reagent or method that, alone or in combination with associated technologies, provides the means to generate any new research tool or application. Because applications of synthetic biology likely will embody multiple patented inventions, it will be important to create structures for managing intellectual property rights that best promote continued innovation. Monitoring the enabling technologies of synthetic biology will facilitate the systematic investigation of property rights coupled to these technologies and help shape policies and practices that impact the use, regulation, patenting, and licensing of these technologies. Results We conducted a survey among a self-identifying community of practitioners engaged in synthetic biology research to obtain their opinions and experiences with technologies that support the engineering of biological systems. Technologies widely used and considered enabling by survey participants included public and private registries of biological parts, standard methods for physical assembly of DNA constructs, genomic databases, software tools for search, alignment, analysis, and editing of DNA sequences, and commercial services for DNA synthesis and sequencing. Standards and methods supporting measurement, functional composition, and data exchange were less widely used though still considered enabling by a subset of survey participants. Conclusions The set of enabling technologies compiled from this survey provide insight into the many and varied technologies that support innovation in synthetic biology. Many of these technologies are widely accessible for use, either by virtue of being in the public domain or through legal tools such as non-exclusive licensing. Access to some patent protected technologies is less clear and use of these technologies may be subject to restrictions imposed by material transfer agreements or other contract terms. We expect the technologies considered enabling for synthetic biology to change as the field advances. By monitoring the enabling technologies of synthetic biology and addressing the policies and practices that impact their development and use, our hope is that the field will be better able to realize its full potential. PMID:23663447

Incorporating an audience response system into veterinary dermatology lectures: effect on student knowledge retention and satisfaction.

PubMed

Plant, Jon D

2007-01-01

Veterinary educators are charged with delivering large amounts of information to adult students, who benefit from a more interactive learning environment than is often achieved through didactic lectures. Audience response systems (ARS) with wireless keypad technology facilitate interactive learning and have been used successfully in the education of health professionals. The objectives of this pilot study were to determine the effect of an ARS on the knowledge retention of veterinary dermatology students and to survey student attitudes concerning its use. A cohort-controlled trial was conducted to evaluate the potential benefits of ARS for short-term and long-term knowledge retention. Students also participated in four hours of student-directed case simulations using ARS technology. Students were surveyed regarding opinions on the use of the ARS. The mean short-term knowledge-retention test scores of groups A (ARS+) and B (ARS-) were 81% and 78%, respectively. The mean long-term knowledge-retention test scores of groups A and B were 54% and 55%, respectively. The differences between groups were not significant for either time period (p = 0.32, p = 0.77). Although benefits to short-term and long-term knowledge retention were not detected in this pilot study, all students responding to the survey perceived a benefit and supported the use of ARS in the clinical veterinary curriculum. ARS technology provides a tool for lecturers to create an interactive learning environment well suited for teaching veterinary dermatology.

Liquid-propellant rocket engines health-monitoring—a survey

NASA Astrophysics Data System (ADS)

Wu, Jianjun

2005-02-01

This paper is intended to give a summary on the health-monitoring technology, which is one of the key technologies both for improving and enhancing the reliability and safety of current rocket engines and for developing new-generation high reliable reusable rocket engines. The implication of health-monitoring and the fundamental principle obeyed by the fault detection and diagnostics are elucidated. The main aspects of health-monitoring such as system frameworks, failure modes analysis, algorithms of fault detection and diagnosis, control means and advanced sensor techniques are illustrated in some detail. At last, the evolution trend of health-monitoring techniques of liquid-propellant rocket engines is set out.

The Pervasiveness and Impact of Electronic Communication Technologies in Organizations: A Survey of Major American Corporations.

ERIC Educational Resources Information Center

Hellweg, Susan A.; And Others

A survey of the Fortune 500 corporations was conducted to ascertain the pervasiveness and perceived impact of five electronic communication technologies (electronic mail, videotex, interactive computers, video teleconferencing, and word processing). Ninety-four corporations responded to a 53-item questionnaire and follow-up survey. Analysis of the…

Working Smarter: The Skill Bias of Computer Technologies. The Evolving Workplace Series

ERIC Educational Resources Information Center

Wannell, Ted; Ali, Jennifer

2002-01-01

This document provides data from the new Workplace and Employee Survey (WES) conducted by Statistics Canada with the support of Human Resources Development Canada. The survey consists of two components: (1) a workplace survey on the adoption of technologies, organizational change, training and other human resource practices, business strategies,…

A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

ERIC Educational Resources Information Center

Baker, Ross A.

2012-01-01

The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

ERIC Educational Resources Information Center

Shirk, Gary M.

1984-01-01

Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

The Asilomar Survey: Stakeholders' Opinions on Ethical Issues Related to Brain-Computer Interfacing.

PubMed

Nijboer, Femke; Clausen, Jens; Allison, Brendan Z; Haselager, Pim

2013-01-01

Brain-Computer Interface (BCI) research and (future) applications raise important ethical issues that need to be addressed to promote societal acceptance and adequate policies. Here we report on a survey we conducted among 145 BCI researchers at the 4 th International BCI conference, which took place in May-June 2010 in Asilomar, California. We assessed respondents' opinions about a number of topics. First, we investigated preferences for terminology and definitions relating to BCIs. Second, we assessed respondents' expectations on the marketability of different BCI applications (BCIs for healthy people, BCIs for assistive technology, BCIs-controlled neuroprostheses and BCIs as therapy tools). Third, we investigated opinions about ethical issues related to BCI research for the development of assistive technology: informed consent process with locked-in patients, risk-benefit analyses, team responsibility, consequences of BCI on patients' and families' lives, liability and personal identity and interaction with the media. Finally, we asked respondents which issues are urgent in BCI research.

Using 3D computer simulations to enhance ophthalmic training.

PubMed

Glittenberg, C; Binder, S

2006-01-01

To develop more effective methods of demonstrating and teaching complex topics in ophthalmology with the use of computer aided three-dimensional (3D) animation and interactive multimedia technologies. We created 3D animations and interactive computer programmes demonstrating the neuroophthalmological nature of the oculomotor system, including the anatomy, physiology and pathophysiology of the extra-ocular eye muscles and the oculomotor cranial nerves, as well as pupillary symptoms of neurological diseases. At the University of Vienna we compared their teaching effectiveness to conventional teaching methods in a comparative study involving 100 medical students, a multiple choice exam and a survey. The comparative study showed that our students achieved significantly better test results (80%) than the control group (63%) (diff. = 17 +/- 5%, p = 0.004). The survey showed a positive reaction to the software and a strong preference to have more subjects and techniques demonstrated in this fashion. Three-dimensional computer animation technology can significantly increase the quality and efficiency of the education and demonstration of complex topics in ophthalmology.

Pipe Crawler{reg_sign} internal piping characterization system - deactivation and decommissioning focus area. Innovative Technology Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-02-01

Pipe Crawler{reg_sign} is a pipe surveying system for performing radiological characterization and/or free release surveys of piping systems. The technology employs a family of manually advanced, wheeled platforms, or crawlers, fitted with one or more arrays of thin Geiger Mueller (GM) detectors operated from an external power supply and data processing unit. Survey readings are taken in a step-wise fashion. A video camera and tape recording system are used for video surveys of pipe interiors prior to and during radiological surveys. Pipe Crawler{reg_sign} has potential advantages over the baseline and other technologies in areas of cost, durability, waste minimization, andmore » intrusiveness. Advantages include potentially reduced cost, potential reuse of the pipe system, reduced waste volume, and the ability to manage pipes in place with minimal disturbance to facility operations. Advantages over competing technologies include potentially reduced costs and the ability to perform beta-gamma surveys that are capable of passing regulatory scrutiny for free release of piping systems.« less

Study on Practical Technologies of Aerial Triangulation for Real Scene 3d Moeling with Oblique Photography

NASA Astrophysics Data System (ADS)

Cai, Z.; Liu, W.; Luo, G.; Xiang, Z.

2018-04-01

The key technologies in the real scene 3D modeling of oblique photography mainly include the data acquisition of oblique photography, layout and surveying of photo control points, oblique camera calibration, aerial triangulation, dense matching of multi-angle image, building of triangulation irregular network (TIN) and TIN simplification and automatic texture mapping, among which aerial triangulation is the core and the results of aerial triangulation directly affect the later model effect and the corresponding data accuracy. Starting from this point of view, this paper aims to study the practical technologies of aerial triangulation for real scene 3D modeling with oblique photography and finally proposes a technical method of aerial triangulation with oblique photography which can be put into practice.

Singular Optimal Controls of Rocket Motion (Survey)

NASA Astrophysics Data System (ADS)

Kiforenko, B. N.

2017-05-01

Survey of modern state and discussion of problems of the perfection of methods of investigation of variational problems with a focus on mechanics of space flight are presented. The main attention is paid to the enhancement of the methods of solving of variational problems of rocket motion in the gravitational fields, including rocket motion in the atmosphere. These problems are directly connected with the permanently actual problem of the practical astronautics to increase the payload that is orbited by the carrier rockets in the circumplanetary orbits. An analysis of modern approaches to solving the problems of control of rockets and spacecraft motion on the trajectories with singular arcs that are optimal for the motion of the variable mass body in the medium with resistance is given. The presented results for some maneuvers can serve as an information source for decision making on designing promising rocket and space technology

Assessment of research and technology transfer needs for wood-frame housing

Treesearch

Kevin Powell; David Tilotta; Karen Martinson

2008-01-01

Improvements to housing will require both research and the transfer of that research to homebuilders, homebuyers, and others in need of technology. This report summarizes results of a national survey on research and technology transfer needs for housing and prioritizes those needs. Survey participants included academicians, builders, code officials, government...

A Comparison between Quantity Surveying and Information Technology Students on Web Application in Learning Process

ERIC Educational Resources Information Center

Keng, Tan Chin; Ching, Yeoh Kah

2015-01-01

The use of web applications has become a trend in many disciplines including education. In view of the influence of web application in education, this study examines web application technologies that could enhance undergraduates' learning experiences, with focus on Quantity Surveying (QS) and Information Technology (IT) undergraduates. The…

Technology Education in the United States: A National Survey.

ERIC Educational Resources Information Center

Alexander, N. Creighton; Allen, Michael; Nelson, Edward; Sisk, Phillip

1998-01-01

As a serious technology education shortage plagues the nation, a national survey with responses from 20 states shows some states are using creative methods to cultivate future educators and improve the state of technology literacy for all students. Trends include modularization, elementary programs, and a push for national and state standards.…

Trends in Technology Planning and Funding in Florida K-12 Public Schools

ERIC Educational Resources Information Center

Ritzhaupt, Albert Dieter; Hohlfeld, Tina N; Barron, Ann E.; Kemker, Kate

2008-01-01

This empirical research investigates trends in technology planning and funding in Florida's K-12 public schools between the 2003-04 and 2005-06 academic years. Survey items that focused on funding and planning issues on Florida's statewide school technology integration survey were analyzed using logistic models. Results indicate a significant…

Impact of Professional Development on Level of Technology Integration in the Elementary Classroom

ERIC Educational Resources Information Center

Miktuk, Darlynda

2012-01-01

The purpose of the quantitative study was to evaluate the impact of professional development on the level of technology integration within the elementary classroom using an online survey known as the LoTi (levels of teaching innovation) survey. Information about the history of computers, technology integration, andragogy, and effective…

Developing the online survey.

PubMed

Gordon, Jeffry S; McNew, Ryan

2008-12-01

Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

Emerging Technologies for Assembly of Microscale Hydrogels

PubMed Central

Kavaz, Doga; Demirel, Melik C.; Demirci, Utkan

2013-01-01

Assembly of cell encapsulating building blocks (i.e., microscale hydrogels) has significant applications in areas including regenerative medicine, tissue engineering, and cell-based in vitro assays for pharmaceutical research and drug discovery. Inspired by the repeating functional units observed in native tissues and biological systems (e.g., the lobule in liver, the nephron in kidney), assembly technologies aim to generate complex tissue structures by organizing microscale building blocks. Novel assembly technologies enable fabrication of engineered tissue constructs with controlled properties including tunable microarchitectural and predefined compositional features. Recent advances in micro- and nano-scale technologies have enabled engineering of microgel based three dimensional (3D) constructs. There is a need for high-throughput and scalable methods to assemble microscale units with a complex 3D micro-architecture. Emerging assembly methods include novel technologies based on microfluidics, acoustic and magnetic fields, nanotextured surfaces, and surface tension. In this review, we survey emerging microscale hydrogel assembly methods offering rapid, scalable microgel assembly in 3D, and provide future perspectives and discuss potential applications. PMID:23184717

Assessing the utility of TAM, TPB, and UTAUT for advanced driver assistance systems.

PubMed

Rahman, Md Mahmudur; Lesch, Mary F; Horrey, William J; Strawderman, Lesley

2017-11-01

Advanced Driver Assistance Systems (ADAS) are intended to enhance driver performance and improve transportation safety. The potential benefits of these technologies, such as reduction in number of crashes, enhancing driver comfort or convenience, decreasing environmental impact, etc., have been acknowledged by transportation safety researchers and federal transportation agencies. Although these systems afford safety advantages, they may also challenge the traditional role of drivers in operating vehicles. Driver acceptance, therefore, is essential for the implementation of these systems into the transportation system. Recognizing the need for research into the factors affecting driver acceptance, this study assessed the utility of the Technology Acceptance Model (TAM), the Theory of Planned Behavior (TPB), and the Unified Theory of Acceptance and Use of Technology (UTAUT) for modelling driver acceptance in terms of Behavioral Intention to use an ADAS. Each of these models propose a set of factors that influence acceptance of a technology. Data collection was done using two approaches: a driving simulator approach and an online survey approach. In both approaches, participants interacted with either a fatigue monitoring system or an adaptive cruise control system combined with a lane-keeping system. Based on their experience, participants responded to several survey questions to indicate their attitude toward using the ADAS and their perception of its usefulness, usability, etc. A sample of 430 surveys were collected for this study. Results found that all the models (TAM, TPB, and UTAUT) can explain driver acceptance with their proposed sets of factors, each explaining 71% or more of the variability in Behavioral Intention. Among the models, TAM was found to perform the best in modelling driver acceptance followed by TPB. The findings of this study confirm that these models can be applied to ADAS technologies and that they provide a basis for understanding driver acceptance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pennsylvania College of Technology Personal Assessment of the College Environment (PACE) Survey Report, 1999.

ERIC Educational Resources Information Center

Pennsylvania Coll. of Technology, Williamsport. Office of Strategic Planning and Research.

This report provides the results of the Personal Assessment of the College Environment (PACE) survey at the Pennsylvania College of Technology (Penn College). The instrument was designed by the National Initiative for Leadership and Institutional Effectiveness at North Carolina State University. The primary purpose of the survey is to assess the…

Information and Communication Technologies and Continuing Health Professional Education in Canada. A Survey of Providers Final Report.

ERIC Educational Resources Information Center

Memorial Univ., St. John's (Newfoundland).

The use of information and communication technologies (ICT) in continuing health professional education (CHPE) was examined in a national survey of Canadian CHPE providers. Of the 3,044 surveys distributed to schools of medicine, nursing, and pharmacy, national/provincial health professional associations, nonprofit health advocacy organizations,…

Use of Commonly Available Technologies for Diabetes Information and Self-Management Among Adolescents With Type 1 Diabetes and Their Parents: A Web-Based Survey Study.

PubMed

Vaala, Sarah E; Hood, Korey K; Laffel, Lori; Kumah-Crystal, Yaa A; Lybarger, Cindy K; Mulvaney, Shelagh A

2015-12-29

For individuals with Type 1 diabetes (T1D), following a complicated daily medical regimen is critical to maintaining optimal health. Adolescents in particular struggle with regimen adherence. Commonly available technologies (eg, diabetes websites, apps) can provide diabetes-related support, yet little is known about how many adolescents with T1D use them, why they are used, or relationships between use and self-management. This study examined adolescent and parent use of 5 commonly available technologies for diabetes, including proportions who use each technology, frequency of use, and number of different technologies used for diabetes. Analyses also investigated the reasons adolescents reported for using or not using technologies for diabetes, and factors correlated with adolescents' technology use. Finally, this study examined relationships between the type and number of technologies adolescents use for diabetes and their self-management and glycemic control. Adolescents (12-17 years) and their parents (N=174 pairs), recruited from a pediatric diabetes clinic (n=134) and the Children with Diabetes community website (n=40), participated in this Web-based survey study. Glycosylated hemoglobin (A1C) values were obtained from medical records for pediatric clinic patients. Adolescents reported their use of 5 commonly available technologies for diabetes (ie, social networking, diabetes websites, mobile diabetes apps, text messaging, and glucometer/insulin pump software), reasons for use, and self-management behavior (Self-Care Inventory-Revised, SCI-R). Most adolescents and parents used at least one of the 5 technologies for diabetes. Among adolescents, the most commonly used technology for diabetes was text messaging (53%), and the least commonly used was diabetes websites (25%). Most adolescents who used diabetes apps, text messaging, or pump/glucometer software did so more frequently (≥2 times per week), compared to social networking and website use (≤1 time per week). The demographic, clinical, and parent-technology use factors related to adolescents' technology use varied by technology. Adolescents who used social networking, websites, or pump/glucometer software for diabetes had better self-management behavior (SCI-R scores: beta=.18, P=.02; beta=.15, P=.046; beta=.15, P=.04, respectively), as did those who used several technologies for diabetes (beta=.23, P=.003). However, use of diabetes websites was related to poorer glycemic control (A1C: beta=.18, P=.01). Adolescents with T1D may be drawn to different technologies for different purposes, as individual technologies likely offer differing forms of support for diabetes self-management (eg, tracking blood glucose or aiding problem solving). Findings suggest that technologies that are especially useful for adolescents' diabetes problem solving may be particularly beneficial for their self-management. Additional research should examine relationships between the nature of technology use and adolescents' T1D self-management over time.

Use of Commonly Available Technologies for Diabetes Information and Self-Management Among Adolescents With Type 1 Diabetes and Their Parents: A Web-Based Survey Study

PubMed Central

Vaala, Sarah E; Hood, Korey K; Laffel, Lori; Kumah-Crystal, Yaa A; Lybarger, Cindy K

2015-01-01

Background For individuals with Type 1 diabetes (T1D), following a complicated daily medical regimen is critical to maintaining optimal health. Adolescents in particular struggle with regimen adherence. Commonly available technologies (eg, diabetes websites, apps) can provide diabetes-related support, yet little is known about how many adolescents with T1D use them, why they are used, or relationships between use and self-management. Objective This study examined adolescent and parent use of 5 commonly available technologies for diabetes, including proportions who use each technology, frequency of use, and number of different technologies used for diabetes. Analyses also investigated the reasons adolescents reported for using or not using technologies for diabetes, and factors correlated with adolescents’ technology use. Finally, this study examined relationships between the type and number of technologies adolescents use for diabetes and their self-management and glycemic control. Methods Adolescents (12-17 years) and their parents (N=174 pairs), recruited from a pediatric diabetes clinic (n=134) and the Children with Diabetes community website (n=40), participated in this Web-based survey study. Glycosylated hemoglobin (A1C) values were obtained from medical records for pediatric clinic patients. Adolescents reported their use of 5 commonly available technologies for diabetes (ie, social networking, diabetes websites, mobile diabetes apps, text messaging, and glucometer/insulin pump software), reasons for use, and self-management behavior (Self-Care Inventory-Revised, SCI-R). Results Most adolescents and parents used at least one of the 5 technologies for diabetes. Among adolescents, the most commonly used technology for diabetes was text messaging (53%), and the least commonly used was diabetes websites (25%). Most adolescents who used diabetes apps, text messaging, or pump/glucometer software did so more frequently (≥2 times per week), compared to social networking and website use (≤1 time per week). The demographic, clinical, and parent-technology use factors related to adolescents’ technology use varied by technology. Adolescents who used social networking, websites, or pump/glucometer software for diabetes had better self-management behavior (SCI-R scores: beta=.18, P=.02; beta=.15, P=.046; beta=.15, P=.04, respectively), as did those who used several technologies for diabetes (beta=.23, P=.003). However, use of diabetes websites was related to poorer glycemic control (A1C: beta=.18, P=.01). Conclusions Adolescents with T1D may be drawn to different technologies for different purposes, as individual technologies likely offer differing forms of support for diabetes self-management (eg, tracking blood glucose or aiding problem solving). Findings suggest that technologies that are especially useful for adolescents’ diabetes problem solving may be particularly beneficial for their self-management. Additional research should examine relationships between the nature of technology use and adolescents’ T1D self-management over time. PMID:26715191

[Characterization of the training and practice of human talent working in environmental health in Colombia].

PubMed

Agudelo-Calderón, Carlos A; García-Ubaque, Juan C; Robledo-Martínez, Rocío; García-Ubaque, Cesar A; Vaca, Martha L

2015-07-01

Objectives To characterize the peculiarities in the training, exercise, and performance of human talent working in environmental health in Colombia. Method Documentary and database reviews. Surveys and semi-structured interviews. Results Approximately 70 % of professionals in the area of environmental health work in health management, food engineering, environmental engineering, sanitary engineering, veterinary medicine, and pharmaceutical chemistry. 63 % of technologists belong to the field of sanitation technology. Only 20 % of surveyed educational institutions apply the competence approach to training to their students and the identification of occupational characteristics in the labor market is only used at the undergraduate level as a criterion of academic analysis and design. Only 20 % of educational institutions identify educational trends in Colombian and or international environmental health as a contribution to their programs. In prospective practices, the following topics to be strengthened were identified: risk factor identfication, measurement, and control; design and implementation of mechanisms for controlling environmental risks; forms of interdisciplinary work between the natural, social and health sciences; preventative and environmental protection measures and the concept of environment (natural, social, and cultural). Conclusion The human talent currently working in environmental health in the country is concentrated in primary care activities (inspection, monitoring and control) and a large spread exists in mission processes and competences, both professionally and technologically. A lack of coordination between the environmental sector and the education sector can be observed. A great diversity exists among the profiles offered by the different educational programs related to environmental health.

A Novel Electronic Data Collection System for Large-Scale Surveys of Neglected Tropical Diseases

PubMed Central

King, Jonathan D.; Buolamwini, Joy; Cromwell, Elizabeth A.; Panfel, Andrew; Teferi, Tesfaye; Zerihun, Mulat; Melak, Berhanu; Watson, Jessica; Tadesse, Zerihun; Vienneau, Danielle; Ngondi, Jeremiah; Utzinger, Jürg; Odermatt, Peter; Emerson, Paul M.

2013-01-01

Background Large cross-sectional household surveys are common for measuring indicators of neglected tropical disease control programs. As an alternative to standard paper-based data collection, we utilized novel paperless technology to collect data electronically from over 12,000 households in Ethiopia. Methodology We conducted a needs assessment to design an Android-based electronic data collection and management system. We then evaluated the system by reporting results of a pilot trial and from comparisons of two, large-scale surveys; one with traditional paper questionnaires and the other with tablet computers, including accuracy, person-time days, and costs incurred. Principle Findings The electronic data collection system met core functions in household surveys and overcame constraints identified in the needs assessment. Pilot data recorders took 264 (standard deviation (SD) 152 sec) and 260 sec (SD 122 sec) per person registered to complete household surveys using paper and tablets, respectively (P = 0.77). Data recorders felt a lack of connection with the interviewee during the first days using electronic devices, but preferred to collect data electronically in future surveys. Electronic data collection saved time by giving results immediately, obviating the need for double data entry and cross-correcting. The proportion of identified data entry errors in disease classification did not differ between the two data collection methods. Geographic coordinates collected using the tablets were more accurate than coordinates transcribed on a paper form. Costs of the equipment required for electronic data collection was approximately the same cost incurred for data entry of questionnaires, whereas repeated use of the electronic equipment may increase cost savings. Conclusions/Significance Conducting a needs assessment and pilot testing allowed the design to specifically match the functionality required for surveys. Electronic data collection using an Android-based technology was suitable for a large-scale health survey, saved time, provided more accurate geo-coordinates, and was preferred by recorders over standard paper-based questionnaires. PMID:24066147

A teleoperated system for remote site characterization

NASA Technical Reports Server (NTRS)

Sandness, Gerald A.; Richardson, Bradley S.; Pence, Jon

1994-01-01

The detection and characterization of buried objects and materials is an important step in the restoration of burial sites containing chemical and radioactive waste materials at Department of Energy (DOE) and Department of Defense (DOD) facilities. By performing these tasks with remotely controlled sensors, it is possible to obtain improved data quality and consistency as well as enhanced safety for on-site workers. Therefore, the DOE Office of Technology Development and the US Army Environmental Center have jointly supported the development of the Remote Characterization System (RCS). One of the main components of the RCS is a small remotely driven survey vehicle that can transport various combinations of geophysical and radiological sensors. Currently implemented sensors include ground-penetrating radar, magnetometers, an electromagnetic induction sensor, and a sodium iodide radiation detector. The survey vehicle was constructed predominantly of non-metallic materials to minimize its effect on the operation of its geophysical sensors. The system operator controls the vehicle from a remote, truck-mounted, base station. Video images are transmitted to the base station by a radio link to give the operator necessary visual information. Vehicle control commands, tracking information, and sensor data are transmitted between the survey vehicle and the base station by means of a radio ethernet link. Precise vehicle tracking coordinates are provided by a differential Global Positioning System (GPS).

78 FR 40728 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... surveys include: The benefits of using technology for learning; attitudes and interest in math and science... in DoDEA's currently in-process Technology Plan. The survey results will be used at all levels of the...

Survey and Restoration

NASA Astrophysics Data System (ADS)

Mileto, C.; Vegas, F.

2017-05-01

In addition to the technological evolution over the last two centuries, survey has experienced two main conceptual leaps: the introduction of photography as a tool for an indiscriminate register for reality, and the shift from autographic to allographic survey, phenomena which can generate a distancing effect within the restoration process. Besides, this text presents the relationship between survey in its numerous forms and technologies (manual and semi-manual to more complex ones like scanner-laser) and the restoration of the building, either for establishing a diagnosis, operating or valorizating, illustrating it with examples developed by the authors, as well as the criteria to be applied when documenting a building to be restored, irrespective of the means and technology available in each case.

Do Professors Dream of Electronic Students? Faculty Anxiety and the New Information Technologies.

ERIC Educational Resources Information Center

Novek, Eleanor M.

This survey of faculty attitudes toward technology calls for more critical dialogue on the uses, effects and hidden costs of information technology in the classroom and the national political economy. A survey was administered to 250 faculty members (135 were returned) at a northeastern university. The comments of respondents fell into two main…

National Survey: What Do Principals Believe? Technology Counts, 2018. Education Week. Volume 37, Issue 27

ERIC Educational Resources Information Center

Bushweller, Kevin C., Ed.

2018-01-01

The 2018 edition of "Technology Counts" is a nationally representative survey of 500 principals, assistant principals, and other school leaders to better understand what principals are thinking and doing about some of the technology issues in their schools today. Contents include: (1) Pressure Points for Principals (Kevin Bushweller);…

Literacy Teachers' Perceptions of Professional Development that Increases Integration of Technology into Literacy Instruction

ERIC Educational Resources Information Center

Hutchison, Amy

2012-01-01

A national survey of 1441 literacy teachers in the US was conducted to understand the integration of digital technology into instruction. This paper reports results from open-ended questions in the survey aimed at determining teachers' perceptions about how to improve professional development in the area of technology integration. Data were…

National Board Certified School Librarians' Leadership in Technology Integration: Results of a National Survey

ERIC Educational Resources Information Center

Everhart, Nancy; Mardis, Marcia A.; Johnston, Melissa

2011-01-01

In an effort to address the lack of empirical knowledge about the school librarians' role in technology, the Institute for Museum and Library Services funded Project Leadership-in-Action (LIA) to study leadership practices of school librarians. This current grant project includes a survey of the technology integration practices of school…

Urban-Rural Differences in the Availability of Hospital Information Technology Applications: A Survey of Georgia Hospitals

ERIC Educational Resources Information Center

Culler, Steven D.; Atherly, Adam; Walczak, Sandra; Davis, Anne; Hawley, Jonathan N.; Rask, Kimberly J.; Naylor, Vi; Thorpe, Kenneth E.

2006-01-01

Context: Information technology (IT) has been identified as a potential tool for improving the safety of health care delivery. Purpose: To determine if there are significant differences between urban and rural community hospitals in the availability of selected IT functional applications and technological devices. Methods: A mailed survey of…

Validity and Appropriate Uses of the Revised Technology Uses and Perceptions Survey (TUPS)

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.; Huggins-Manley, A. Corinne; Dawson, Kara; Agaçli-Dogan, Nihan; Dogan, Selcuk

2017-01-01

The purpose of this article is to explore validity evidence and appropriate uses of the revised Technology Uses and Perceptions Survey (TUPS) designed to measure in-service teacher perspectives about technology integration in K-12 schools and classrooms. The revised TUPS measures 10 domains, including Access and Support; Preparation of Technology…

Real-Time Assessment of Problem-Solving of Physics Students Using Computer-Based Technology

ERIC Educational Resources Information Center

Gok, Tolga

2012-01-01

The change in students' problem solving ability in upper-level course through the application of a technological interactive environment--Tablet PC running InkSurvey--was investigated in present study. Tablet PC/InkSurvey interactive technology allowing the instructor to receive real-time formative assessment as the class works through the problem…

Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1999-06-01

The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detectionmore » level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites.« less

Space Network Control Conference on Resource Allocation Concepts and Approaches

NASA Technical Reports Server (NTRS)

Moe, Karen L. (Editor)

1991-01-01

The results are presented of the Space Network Control (SNC) Conference. In the late 1990s, when the Advanced Tracking and Data Relay Satellite System is operational, Space Network communication services will be supported and controlled by the SNC. The goals of the conference were to survey existing resource allocation concepts and approaches, to identify solutions applicable to the Space Network, and to identify avenues of study in support of the SNC development. The conference was divided into three sessions: (1) Concepts for Space Network Allocation; (2) SNC and User Payload Operations Control Center (POCC) Human-Computer Interface Concepts; and (3) Resource Allocation Tools, Technology, and Algorithms. Key recommendations addressed approaches to achieving higher levels of automation in the scheduling process.

Requirements and Sizing Investigation for Constellation Space Suit Portable Life Support System Trace Contaminant Control

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.; Waguespack, Glenn

2010-01-01

The Trace Contaminant Control System (TCCS), located within the ventilation loop of the Constellation Space Suit Portable Life Support System (PLSS), is responsible for removing hazardous trace contaminants from the space suit ventilation flow. This paper summarizes the results of a trade study that evaluated if trace contaminant control could be accomplished without a TCCS, relying on suit leakage, ullage loss from the carbon dioxide and humidity control system, and other factors. Trace contaminant generation rates were revisited to verify that values reflect the latest designs for Constellation Space Suit System (CSSS) pressure garment materials and PLSS hardware. Additionally, TCCS sizing calculations were performed and a literature survey was conducted to review the latest developments in trace contaminant technologies.

Identification and assessment of professional competencies for implementation of nanotechnology in engineering education

NASA Astrophysics Data System (ADS)

Jean, Ming-Der; Jiang, Ji-Bin; Chien, Jia-Yi

2017-11-01

The purpose of this study was to construct the indicators of professional competencies of the nanotechnology-based sputtering system industry based on industry requirements and analyse the core competencies of the industry for promoting the human resource of physical vapour deposition technology. The document analysis, expert interview, and Delphi technique surveys were considered and the survey items with 32 items divided into 7 domains were selected according to consensus opinions of 10 experts by the Delphi survey technique. Through three questionnaire surveys' analysis, the professional competence scales for the K-S tests showed a good internal consistency. The findings of this study provide guidelines for professional competence for nanotechnology-based sputtering technology by applying surface heat-treatment industry. These guidelines can also reveal the practical competency requirements of nanotechnology-based sputtering technology to deal with any subsequent challenges, future developments, and invisible services for students in a technology institute programme.

Professional Development Needs of Science and Technology Librarians: Results of the 2012 SLA/PAM Professional Development Committee Survey

ERIC Educational Resources Information Center

Tchangalova, Nedelina; Lam, Margaret N.

2013-01-01

This article reports and analyzes the survey results on the continuing education needs of librarians with current job responsibilities in the science, technology, and engineering subject fields. The intended purpose of the survey results is to assist conference coordinators in the development of a continuing education program at future Special…

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

Teachers' Perceptions of Integrating Information and Communication Technologies into Literacy Instruction: A National Survey in the United States

ERIC Educational Resources Information Center

Hutchison, Amy; Reinking, David

2011-01-01

This research explores literacy teachers' perceptions of integrating information communication technologies (ICTs) into literacy instruction. To this end, a national survey of 1,441 literacy teachers in the United States was conducted. The survey provided data concerning the types and levels of reported availability and use of ICTs, beliefs about…

Involving children in the development of assistive technology devices.

PubMed

Allsop, M; Gallagher, J; Holt, R; Bhakta, B; Wilkie, R M

2011-01-01

To investigate the implementation of a web-based survey for involving children in the design of assistive technology devices within the primary school environment. Children were recruited within their normal school environment. They completed tasks within the survey that sought to gather their personal preferences about assistive technology devices. From six primary schools, 257 children (mean age = 9 years and 8 months, SD = 1.51; 123 males, 134 females) including children with cerebral palsy (N = 11), varying levels of deafness (N = 7), global developmental delay (N = 2) and Down's syndrome (N = 1) participated. Observations were taken whilst the children completed the survey tasks. All children were able to complete the tasks from the survey, although children with disabilities had higher completion times and most required a form of assistance from support assistants and/or sign language interpreters. The use of the web-based survey provided a novel means with which to involve children with and without disabilities in the design of assistive technology devices within a primary school environment. In order for the survey to be utilised more widely, issues that arose when involving children with disabilities need to be addressed.

A study of topics for distance education-A survey of U.S. Fish and Wildlife Service employees

USGS Publications Warehouse

Ratz, Joan M.; Schuster, Rudy M.; Marcy, Ann H.

2011-01-01

The purpose of this study was to identify training topics and distance education technologies preferred by U.S. Fish and Wildlife Service employees. This study was conducted on behalf of the National Conservation Training Center to support their distance education strategy planning and implementation. When selecting survey recipients, we focused on employees in positions involving conservation and environmental education and outreach programming. We conducted the study in two phases. First, we surveyed 72 employees to identify useful training topics. The response rate was 61 percent; respondents were from all regions and included supervisors and nonsupervisors. Five topics for training were identified: creating and maintaining partnerships (partnerships), technology, program planning and development (program planning), outreach methods to engage the community (outreach methods), and evaluation methods. In the second phase, we surveyed 1,488 employees to assess preferences for training among the five topics identified in the first survey and preferences among six distance education technologies: satellite television, video conferencing, audio conferencing, computer mediated training, written resources, and audio resources. Two types of instructor-led training were included on the survey to compare to the technology options. Respondents were asked what types of information, such as basic facts or problem solving skills, were needed for each of the five topics. The adjusted response rate was 64 percent; respondents were from all regions and included supervisors and nonsupervisors. The results indicated clear preferences among respondents for certain training topics and technologies. All five training topics were valued, but the topics of partnerships and technology were given equal value and were valued more than the other three topics. Respondents indicated a desire for training on the topics of partnerships, technology, program planning, and outreach methods. For the six distance education technologies, respondents indicated different levels of usability and access. Audio conferencing and written resources were reported to be most usable and accessible. The ratings of technology usability/access differed according to region; respondents in region 9 rated most technologies higher on usability/access. Respondents indicated they would take courses through either onsite or distance education approaches, but they prefer onsite training for most topics and most types of information.

Determinants of information technology outsourcing among health maintenance organizations.

PubMed

Wholey, D R; Padman, R; Hamer, R; Schwartz, S

2001-09-01

We analyze the determinants of HMO information technology outsourcing using two studies. Study 1 examines the effect of asset specificity on outsourcing for development and operation activities, using HMO specific fixed effects to control for differences between HMOs. Study 2 regresses the HMO specific fixed effects from Study 1, which measure an HMO's propensity to outsource, on HMO characteristics. The data comes from a 1995 InterStudy survey about information technology organization of HMOs. While HMOs split roughly equally in outsourcing information technology development activities, they are extremely unlikely to outsource the day-to-day operation of information systems. The greater an HMO's information technology capability and the complexity of information systems supported, the less likely is an HMO to outsource. While HMOs less than two years old, for-profit HMOs, local or Blue Cross-affiliated HMOs, and mixed HMOs are more likely to outsource, federally qualified HMOs are less likely to outsource. Policy and managerial implications for the adoption and diffusion of new ways of organizing information technology, such as application service providers (ASPs), are discussed.

Racial/ethnic disparities in the utilization of high-technology hospitals.

PubMed

Kim, Tae Hyun; Samson, Linda F; Lu, Ning

2010-09-01

Hospitals with high-technology services may have better outcomes. However, access to high-technology hospitals might not be uniform across racial/ethnic groups. This study examined if racial/ethnic minorities, compared to whites, are less likely to utilize hospitals that have the availability of technology services and infrastructure items such as computed tomography, positron emission tomography, magnetic resonance imaging, diagnostics radiation facility, and a level 1 trauma unit. Data were obtained from the 2003 Healthcare Cost & Utilization Project's Nationwide Inpatient Sample and the 2003 American Hospital Association's annual survey data. The sample consisted of 3381 324 patients admitted to and discharged from 368 hospitals in 18 states in the United States. Logistic regression results suggest that Hispanic patients are less likely than whites to utilize high-technology hospitals when controlling for other factors (odds ratio[OR], 0.47; 95% confidence interval [CI], 0.28-0.79). Our study adds empirical evidence that significant gaps persist in access to care between minorities and whites. Particularly, access to high-technology hospitals for Hispanics appears to be a major problem.

Evaluating a Speech-Language Pathology Technology

PubMed Central

Spinardi-Panes, Ana Carulina; Lopes-Herrera, Simone Aparecida; Maximino, Luciana Paula

2014-01-01

Abstract Background: The creation of new educational strategies based on technology is the essence of telehealth. This innovative learning is an alternative to promote integration and improve the professional practices in speech-language pathology (SLP). The objective of this study was to evaluate an SLP technology designed for distance learning. Materials and Methods: The survey selected fourth-year SLP students (n=60) from three public universities in the state of São Paulo, Brazil. The experimental group (EG) contained 10 students from each university (n=30), and the remaining students formed the control group (CG). Initially, both groups answered a preprotocol questionnaire, and the EG students received the technology, the recommendations, and the deadline to explore the material. In the second stage all students answered the postprotocol questionnaire in order to evaluate the validity and the learning of the technology contents. Results: The comparison between the CG students showed that their performance worsened in the majority in comparison with the EG students, who showed an improved performance. Conclusions: Therefore, this study concluded that the technology instrument actually responded to the population studied and is recommended to complement traditional teaching. PMID:24404815

The use of inexpensive computer-based scanning survey technology to perform medical practice satisfaction surveys.

PubMed

Shumaker, L; Fetterolf, D E; Suhrie, J

1998-01-01

The recent availability of inexpensive document scanners and optical character recognition technology has created the ability to process surveys in large numbers with a minimum of operator time. Programs, which allow computer entry of such scanned questionnaire results directly into PC based relational databases, have further made it possible to quickly collect and analyze significant amounts of information. We have created an internal capability to easily generate survey data and conduct surveillance across a number of medical practice sites within a managed care/practice management organization. Patient satisfaction surveys, referring physician surveys and a variety of other evidence gathering tools have been deployed.

Low Earth Orbit Satellite Tracking Telescope Network: Collaborative Optical Tracking for Enhanced Space Situational Awareness

DTIC Science & Technology

2015-03-27

i.e., temporarily focusing on one object instead of wide area survey) or SOI collection on high interest objects (e.g., unidentified objects ...The Air Force Institute of Technology has spent the last seven years conducting research on orbit identification and object characterization of space... objects through the use of commercial-off-the-shelf hardware systems controlled via custom software routines, referred to simply as TeleTrak. Year

A microelectronics approach for the ROSETTA surface science package

NASA Technical Reports Server (NTRS)

Sandau, Rainer (Editor); Alkalaj, Leon

1996-01-01

In relation to the Rosetta surface science package, the benefits of the application of advanced microelectronics packaging technologies and other output from the Mars environmental survey (MESUR) integrated microelectronics study are reported on. The surface science package will be designed to operate for tens of hours. Its limited mass and power consumption make necessary a highly integrated design with all the instruments and subunits operated from a centralized control and information management subsystem.

Results of the Navy Telework and Technology Survey

DTIC Science & Technology

2012-05-01

failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE...Background • In 2000, Public Law 106-346, §359, indicated that all executive agencies needed to introduce policies for telecommuting • Telework can be...indicated that all executive agencies had to introduce policies for telecommuting ; these policies have taken on additional importance in light of recent

A Fiber Optic Beam Controller for Phased Array Radars.

DTIC Science & Technology

1982-06-01

characteristics with limited discussion of the underlying physics . The components which will be surveyed are: ( 1 ) Optical Fibers, (2) Light Emitters, (3...effect rather than by a physical grating. The defining equation is An = 1 /2 n3 ps p = photo-elastic constant (21) s = the acoustic strain amplitude...RESULTS AND AN INTUITIVE MODEL OF NEAR TERM TECHNOLOGY CHANGES The experimental results are combined with other data and the conclusions drawn are: ( 1

China Report: Science and Technology, No. 209. China Addresses Environmental Issues -- 1/83

DTIC Science & Technology

1983-10-12

determines suc- cess or failure of a plan. The steps in planning can be divided into two stages , preparation and planning. The preparation stage ...Noise Control Legislation Requirements Surveyed (Wen Bobing; FAXUE YANJIU, No 6, 1982)........... 21 System of Two -Fines in...with constant improvement in economic results, it is necessary to adopt the two phase strategic plan of laying a good foundation in the first 10 years

A Survey of Terrain Modeling Technologies and Techniques

DTIC Science & Technology

2007-09-01

Washington , DC 20314-1000 ERDC/TEC TR-08-2 ii Abstract: Test planning, rehearsal, and distributed test events for Future Combat Systems (FCS) require...distance) for all five lines of control points. Blue circles are errors of DSM (original data), red squares are DTM (bare Earth, processed by Intermap...circles are DSM, red squares are DTM ........... 8 5 Distribution of errors for line No. 729. Blue circles are DSM, red squares are DTM

JPRS Report, Science & Technology, USSR: Space.

DTIC Science & Technology

1988-08-17

Half-life, years Specific Heat Release W/hr Plutonium-238 87.5 0.46 Curium-244 18.4 2.8 Curium-242 0.45 120 Polonium - 210 0.38 144 Polonium - 210 ...ASTRONOMICHESKIY ZHURNAL, Vol 14 No 3, Mar 88] 17 Relativistic Effects in Motion and Observations of Artificial Earth Satellites. I. Relativistic...Historical Survey of Biosatellites [V. B. Pishchik, ZEMLYA I VSELENNAYA, No 2, Mar-Apr 88] 35 Advances in Controlling Effects of Weightlessness on

Fall prevention intervention technologies: A conceptual framework and survey of the state of the art.

PubMed

Hamm, Julian; Money, Arthur G; Atwal, Anita; Paraskevopoulos, Ioannis

2016-02-01

In recent years, an ever increasing range of technology-based applications have been developed with the goal of assisting in the delivery of more effective and efficient fall prevention interventions. Whilst there have been a number of studies that have surveyed technologies for a particular sub-domain of fall prevention, there is no existing research which surveys the full spectrum of falls prevention interventions and characterises the range of technologies that have augmented this landscape. This study presents a conceptual framework and survey of the state of the art of technology-based fall prevention systems which is derived from a systematic template analysis of studies presented in contemporary research literature. The framework proposes four broad categories of fall prevention intervention system: Pre-fall prevention; Post-fall prevention; Fall injury prevention; Cross-fall prevention. Other categories include, Application type, Technology deployment platform, Information sources, Deployment environment, User interface type, and Collaborative function. After presenting the conceptual framework, a detailed survey of the state of the art is presented as a function of the proposed framework. A number of research challenges emerge as a result of surveying the research literature, which include a need for: new systems that focus on overcoming extrinsic falls risk factors; systems that support the environmental risk assessment process; systems that enable patients and practitioners to develop more collaborative relationships and engage in shared decision making during falls risk assessment and prevention activities. In response to these challenges, recommendations and future research directions are proposed to overcome each respective challenge. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

PubMed

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

In-Suit Doppler Technology Assessment

NASA Technical Reports Server (NTRS)

Schulze, Arthur E.; Greene, Ernest R.; Nadeau, John J.

1991-01-01

The objective of this program was to perform a technology assessment survey of non-invasive air embolism detection utilizing Doppler ultrasound methodologies. The primary application of this technology will be a continuous monitor for astronauts while performing extravehicular activities (EVA's). The technology assessment was to include: (1) development of a full understanding of all relevant background research; and (2) a survey of the medical ultrasound marketplace for expertise, information, and technical capability relevant to this development. Upon completion of the assessment, LSR was to provide an overview of technological approaches and R&D/manufacturing organizations.

INDEPENDENT VERIFICATION SURVEY REPORT FOR ZONE 1 OF THE EAST TENNESSEE TECHNOLOGY PARK IN OAK RIDGE, TENNESSEE

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, David A.

2012-08-16

Oak Ridge Associated Universities (ORAU) conducted in-process inspections and independent verification (IV) surveys in support of DOE's remedial efforts in Zone 1 of East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. Inspections concluded that the remediation contractor's soil removal and survey objectives were satisfied and the dynamic verification strategy (DVS) was implemented as designed. Independent verification (IV) activities included gamma walkover surveys and soil sample collection/analysis over multiple exposure units (EUs).

Natural language processing-based COTS software and related technologies survey.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stickland, Michael G.; Conrad, Gregory N.; Eaton, Shelley M.

Natural language processing-based knowledge management software, traditionally developed for security organizations, is now becoming commercially available. An informal survey was conducted to discover and examine current NLP and related technologies and potential applications for information retrieval, information extraction, summarization, categorization, terminology management, link analysis, and visualization for possible implementation at Sandia National Laboratories. This report documents our current understanding of the technologies, lists software vendors and their products, and identifies potential applications of these technologies.

The Use of Digital Technologies across the Adult Life Span in Distance Education

ERIC Educational Resources Information Center

Jelfs, Anne; Richardson, John T. E.

2013-01-01

In June 2010, a survey was carried out to explore access to digital technology, attitudes to digital technology and approaches to studying across the adult life span in students taking courses with the UK Open University. In total, 7000 people were surveyed, of whom more than 4000 responded. Nearly all these students had access to a computer and…

Educational Technology in Public School Districts: Fall 2008. First Look. NCES 2010-003

ERIC Educational Resources Information Center

Gray, Lucinda; Lewis, Laurie

2009-01-01

This report provides national data on the availability and use of educational technology in public school districts during fall 2008. The data are the results of a national district-level survey that is one of a set that includes district, school, and teacher surveys on educational technology. Every year between 1994 and 2005 (with the exception…

Educational Technology in U.S. Public Schools: Fall 2008. First Look. NCES 2010-034

ERIC Educational Resources Information Center

Gray, Lucinda; Thomas, Nina; Lewis, Laurie

2010-01-01

This report provides national data on the availability and use of educational technology in public elementary and secondary schools during fall 2008. The data are the results of a national school-level survey that is one of a set that includes district, school, and teacher surveys on educational technology. Every year between 1994 and 2005 (with…

Relating Use of Digital Technology by Pre-Service Teachers to Confidence: A Singapore Survey

ERIC Educational Resources Information Center

Yeung, Alexander Seeshing; Lim, Kam Ming; Tay, Eng Guan; Lam-Chiang, Audrey Cheausim; Hui, Chenri

2012-01-01

Teachers today are expected to be able to apply a wide range of digital technologies in the classroom. Initial teacher education programs should prepare teachers to apply them with confidence. Pre-service teachers in Singapore responded to a survey on use of technologies in their personal lives and in their teaching, and how confident they were in…

A Question of Assistive Technology and Services for Young Children with Physical Disabilities. Project TAARK.

ERIC Educational Resources Information Center

Parette, Howard P., Jr.

A statewide survey of the technology needs of 104 children with physical disabilities aged 0-5 years was conducted in Arkansas as a component of the grant application process of Public Law 100-407 (the Technology-Related Assistance for Individuals with Disabilities Act of 1988). The survey analyzed satisfaction with assistive devices technology…

Technology in Education, 2000: A Comprehensive Report on the State of Technology in the K-12 Market.

ERIC Educational Resources Information Center

Wujcik, Anne

This report presents the results of Market Data Retrieval's (MDR's) annual survey (conducted during the 1999-2000 school year) of the technology market in public education. Each year the MDR survey asks schools to respond to essentially the same questions about their access to and use of computers, CD-ROMs, networks, Internet, and other…

Improved Airborne Gravity Results Using New Relative Gravity Sensor Technology

NASA Astrophysics Data System (ADS)

Brady, N.

2013-12-01

Airborne gravity data has contributed greatly to our knowledge of subsurface geophysics particularly in rugged and otherwise inaccessible areas such as Antarctica. Reliable high quality GPS data has renewed interest in improving the accuracy of airborne gravity systems and recent improvements in the electronic control of the sensor have increased the accuracy and ability of the classic Lacoste and Romberg zero length spring gravity meters to operate in turbulent air conditions. Lacoste and Romberg type gravity meters provide increased sensitivity over other relative gravity meters by utilizing a mass attached to a horizontal beam which is balanced by a ';zero length spring'. This type of dynamic gravity sensor is capable of measuring gravity changes on the order of 0.05 milliGals in laboratory conditions but more commonly 0.7 to 1 milliGal in survey use. The sensor may have errors induced by the electronics used to read the beam position as well as noise induced by unwanted accelerations, commonly turbulence, which moves the beam away from its ideal balance position otherwise known as the reading line. The sensor relies on a measuring screw controlled by a computer which attempts to bring the beam back to the reading line position. The beam is also heavily damped so that it does not react to most unwanted high frequency accelerations. However this heavily damped system is slow to react, particularly in turns where there are very high Eotvos effects. New sensor technology utilizes magnetic damping of the beam coupled with an active feedback system which acts to effectively keep the beam locked at the reading line position. The feedback system operates over the entire range of the system so there is now no requirement for a measuring screw. The feedback system operates at very high speed so that even large turbulent events have minimal impact on data quality and very little, if any, survey line data is lost because of large beam displacement errors. Airborne testing along with results from ground based van testing and laboratory results have shown that the new sensor provides more consistent gravity data, as measured by repeated line surveys, as well as preserving the inherent sensitivity of the Lacoste and Romberg zero length spring design. The sensor also provides reliability during survey operation as there is no mechanical counter screw. Results will be presented which show the advantages of the new sensor system over the current technology in both data quality and survey productivity. Applications include high resolution geoid mapping, crustal structure investigations and resource mapping of minerals, oil and gas.

Structural and process factors affecting the implementation of antimicrobial resistance prevention and control strategies in U.S. hospitals.

PubMed

Chou, Ann F; Yano, Elizabeth M; McCoy, Kimberly D; Willis, Deanna R; Doebbeling, Bradley N

2008-01-01

To address increases in the incidence of infection with antimicrobial-resistant pathogens, the National Foundation for Infectious Diseases and Centers for Disease Control and Prevention proposed two sets of strategies to (a) optimize antibiotic use and (b) prevent the spread of antimicrobial resistance and control transmission. However, little is known about the implementation of these strategies. Our objective is to explore organizational structural and process factors that facilitate the implementation of National Foundation for Infectious Diseases/Centers for Disease Control and Prevention strategies in U.S. hospitals. We surveyed 448 infection control professionals from a national sample of hospitals. Clinically anchored in the Donabedian model that defines quality in terms of structural and process factors, with the structural domain further informed by a contingency approach, we modeled the degree to which National Foundation for Infectious Diseases and Centers for Disease Control and Prevention strategies were implemented as a function of formalization and standardization of protocols, centralization of decision-making hierarchy, information technology capabilities, culture, communication mechanisms, and interdepartmental coordination, controlling for hospital characteristics. Formalization, standardization, centralization, institutional culture, provider-management communication, and information technology use were associated with optimal antibiotic use and enhanced implementation of strategies that prevent and control antimicrobial resistance spread (all p < .001). However, interdepartmental coordination for patient care was inversely related with antibiotic use in contrast to antimicrobial resistance spread prevention and control (p < .0001). Formalization and standardization may eliminate staff role conflict, whereas centralized authority may minimize ambiguity. Culture and communication likely promote internal trust, whereas information technology use helps integrate and support these organizational processes. These findings suggest concrete strategies for evaluating current capabilities to implement effective practices and foster and sustain a culture of patient safety.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatmentmore » centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.« less

Selection and Evaluation of Priority Domains in Global Energy Internet Standard Development Based on Technology Foresight

NASA Astrophysics Data System (ADS)

Jin, Yang; Ciwei, Gao; Jing, Zhang; Min, Sun; Jie, Yu

2017-05-01

The selection and evaluation of priority domains in Global Energy Internet standard development will help to break through limits of national investment, thus priority will be given to standardizing technical areas with highest urgency and feasibility. Therefore, in this paper, the process of Delphi survey based on technology foresight is put forward, the evaluation index system of priority domains is established, and the index calculation method is determined. Afterwards, statistical method is used to evaluate the alternative domains. Finally the top four priority domains are determined as follows: Interconnected Network Planning and Simulation Analysis, Interconnected Network Safety Control and Protection, Intelligent Power Transmission and Transformation, and Internet of Things.

U.S. Dental School Deans’ Perceptions of the Rising Cost of Dental Education and Borrowing Pressures on Dental Students: Report of Survey Results.

PubMed

McAllister, Dora Elías; Garrison, Gwen E; Feldman, Cecile A; Anderson, Eugene L; Cook, Bryan J; Valachovic, Richard W

2015-06-01

This report presents findings from a survey of U.S. dental school deans designed to capture their perceptions regarding the rising cost of dental education and its impact on borrowing by dental students to finance their education. The survey included questions about factors influencing the cost of dental education, concerns about dental student borrowing, and financial awareness resources for students. The survey was distributed to the deans of all 63 U.S. dental schools in January 2013; 42 deans responded, for a 67% response rate. The results indicate that, according to the responding deans, new clinical technologies, technology costs, and central university taxes are the main factors that contribute to the increasing cost of dental education. Coupled with reduced state appropriations at public dental schools and declines in private giving at all dental schools, dental school deans face a perplexing set of financial management challenges. Tuition and fees are a primary source of revenue for all dental schools; however, many deans do not have total control over the cost of attending their schools since tuition and fees are often tied to mandates and policies from the parent university and the state legislature. The findings of this study indicate that U.S. dental school deans are aware of and concerned about the impact of increases in tuition and fees on dental student debt and that they are using a variety of strategies to address the growth in dental student borrowing.

The simulation of decontamination works in premises of the research reactor in NRC 'Kurchatov institute'

DOE Office of Scientific and Technical Information (OSTI.GOV)

Danilovich, Alexey; Ivanov, Oleg; Potapov, Victor

2013-07-01

Application of remote sensing methods using a spectrometric collimated system allows obtaining information about features of a formation of radiation fields in contaminated premises. This information helps in a preparation of a phased plan for dismantling of contaminated equipment. When the survey of technological premises of the research reactor at the Russian Research Centre 'Kurchatov institute' was conducted the remote controlled collimated spectrometric system was used. With its help the scanning of surveyed premises were carried out. As a result of this work, the distribution pattern of radionuclides activity was restored. The simulation of decontamination works was carried out andmore » maps of the distribution of activity and dose rate for surveyed premises were plotted and superimposed on its photo for situations before and after decontamination. The use of obtained results will allow significantly reduce radiation dose for staff at work on dismantling. (authors)« less

The Leadership Role of the Teacher Librarian in Technology Integration: Early Results of a Survey of Highly Certified Teacher Librarians in the United States

ERIC Educational Resources Information Center

Everhart, Nancy; Mardis, Marcia A.; Johnston, Melissa

2010-01-01

In 2008, the United States' Institute for Museum and Library Services funded Project Leadership-in-Action (LIA) that included surveys of the technology integration practices of teacher librarian leaders with National Board Certification. Preliminary 2009 survey results suggested that the 295 respondents worked in well-resourced libraries with…

Autonomous Agents on Expedition: Humans and Progenitor Ants and Planetary Exploration

NASA Astrophysics Data System (ADS)

Rilee, M. L.; Clark, P. E.; Curtis, S. A.; Truszkowski, W. F.

2002-01-01

The Autonomous Nano-Technology Swarm (ANTS) is an advanced mission architecture based on a social insect analog of many specialized spacecraft working together to achieve mission goals. The principal mission concept driving the ANTS architecture is a Main Belt Asteroid Survey in the 2020s that will involve a thousand or more nano-technology enabled, artificially intelligent, autonomous pico-spacecraft (< 1 kg). The objective of this survey is to construct a compendium of composition, shape, and other physical parameter observations of a significant fraction of asteroid belt objects. Such an atlas will be of primary scientific importance for the understanding of Solar System origins and evolution and will lay the foundation for future exploration and capitalization of space. As the capabilities enabling ANTS are developed over the next two decades, these capabilities will need to be proven. Natural milestones for this process include the deployment of progenitors to ANTS on human expeditions to space and remote missions with interfaces for human interaction and control. These progenitors can show up in a variety of forms ranging from spacecraft subsystems and advanced handheld sensors, through complete prototypical ANTS spacecraft. A critical capability to be demonstrated is reliable, long-term autonomous operations across the ANTS architecture. High level, mission-oriented behaviors are to be managed by a control / communications layer of the swarm, whereas common low level functions required of all spacecraft, e.g. attitude control and guidance and navigation, are handled autonomically on each spacecraft. At the higher levels of mission planning and social interaction deliberative techniques are to be used. For the asteroid survey, ANTS acts as a large community of cooperative agents while for precursor missions there arises the intriguing possibility of Progenitor ANTS and humans acting together as agents. For optimal efficiency and responsiveness for individual spacecraft at the lowest levels of control we have been studying control methods based on nonlinear dynamical systems. We describe the critically important autonomous control architecture of the ANTS mission concept and a sequence of partial implementations that feature increasingly autonomous behaviors. The scientific and engineering roles that these Progenitor ANTS could play in human missions or remote missions with near real time human interactions, particularly to the Moon and Mars, will be discussed.

[Social perception of biomedicine in Spain].

PubMed

Pérez Sedeño, Eulalia; Miranda Suárez, María José

2008-12-01

There is increasing concern that studies of public understanding of science, especially biomedicine, should be expected to bring shared frameworks to European and national policies. The present article aims to provide a critical overview of the most recent studies of public understanding of biomedicine in Spain. Specifically, this essay reviews the similarities and differences in the latest European and Spanish surveys. Throughout this article we compare the Third National Survey of Social Perception of Science and Technology produced by the Spanish National Science and Technology Foundation, focusing on issues related to biomedicine, and the Medical and Health Research. A special Eurobarometer Public Survey published by the European Commission. The two surveys were compared attending to the three main common items of science, technology and biomedicine: the level of interest, the level of information and political attitudes. Some discrepancies in the results of the two studies, such as public interest in these subjects, may partly be due to the different methodologies used in the survey designs. Further national studies exploring public understanding of science, technology and biomedicine at the national level, as well as the use of European standards, would be of great help in other cross-national studies and policies. Improving qualitative studies would also be useful to strengthen relations among science, technology and society.

Artificial pancreas (AP) clinical trial participants' acceptance of future AP technology.

PubMed

Bevier, Wendy C; Fuller, Serena M; Fuller, Ryan P; Rubin, Richard R; Dassau, Eyal; Doyle, Francis J; Jovanovič, Lois; Zisser, Howard C

2014-09-01

Artificial pancreas (AP) systems are currently an active field of diabetes research. This pilot study examined the attitudes of AP clinical trial participants toward future acceptance of the technology, having gained firsthand experience. After possible influencers of AP technology adoption were considered, a 34-question questionnaire was developed. The survey assessed current treatment satisfaction, dimensions of clinical trial participant motivation, and variables of the technology acceptance model (TAM). Forty-seven subjects were contacted to complete the survey. The reliability of the survey scales was tested using Cronbach's α. The relationship of the factors to the likelihood of AP technology adoption was explored using regression analysis. Thirty-six subjects (76.6%) completed the survey. Of the respondents, 86.1% were either highly likely or likely to adopt the technology once available. Reliability analysis of the survey dimensions revealed good internal consistency, with scores of >0.7 for current treatment satisfaction, convenience (motivation), personal health benefit (motivation), perceived ease of use (TAM), and perceived usefulness (TAM). Linear modeling showed that future acceptance of the AP was significantly associated with TAM and the motivation variables of convenience plus the individual item benefit to others (R(2)=0.26, P=0.05). When insulin pump and continuous glucose monitor use were added, the model significance improved (R(2)=0.37, P=0.02). This pilot study demonstrated that individuals with direct AP technology experience expressed high likelihood of future acceptance. Results support the factors of personal benefit, convenience, perceived usefulness, and perceived ease of use as reliable scales that suggest system adoption in this highly motivated patient population.

Interarea Oscillation Damping Control Using High Voltage DC Transmission: a Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elizondo, Marcelo Anibal; Fan, Rui; Kirkham, Harold

High-voltage, direct current (HVDC) transmission lines are increasingly being installed in power systems around the world, and this trend is expected to continue with advancements in power electronics technology. These advancements are also bringing multi-terminal direct current (MTDC) systems closer to practical application. In addition, the continued deployment of phasor measurement units (PMUs) makes dynamic information about a large power system readily available for highly controllable components, such as HVDC lines. All these trends have increased the appeal of modulating HVDC lines and MTDC systems to provide grid services in addition to bulk power transfers. This paper provides a literaturemore » survey of HVDC and MTDC damping controllers for interarea oscillations in large interconnected power systems. The literature shows a progression from theoretical research to practical applications. Finally, there are already practical implementations of HVDC modulation for lines in point-to-point configuration, although the modulation of MTDC systems is still in the research stage. As a conclusion, this paper identifies and summarizes open questions that remain to be tackled by researchers and engineers.« less

Interarea Oscillation Damping Control Using High Voltage DC Transmission: a Survey

DOE PAGES

Elizondo, Marcelo Anibal; Fan, Rui; Kirkham, Harold; ...

2018-05-02

High-voltage, direct current (HVDC) transmission lines are increasingly being installed in power systems around the world, and this trend is expected to continue with advancements in power electronics technology. These advancements are also bringing multi-terminal direct current (MTDC) systems closer to practical application. In addition, the continued deployment of phasor measurement units (PMUs) makes dynamic information about a large power system readily available for highly controllable components, such as HVDC lines. All these trends have increased the appeal of modulating HVDC lines and MTDC systems to provide grid services in addition to bulk power transfers. This paper provides a literaturemore » survey of HVDC and MTDC damping controllers for interarea oscillations in large interconnected power systems. The literature shows a progression from theoretical research to practical applications. Finally, there are already practical implementations of HVDC modulation for lines in point-to-point configuration, although the modulation of MTDC systems is still in the research stage. As a conclusion, this paper identifies and summarizes open questions that remain to be tackled by researchers and engineers.« less

Field Methods and Quality-Assurance Plan for Quality-of-Water Activities, U.S. Geological Survey, Idaho National Laboratory, Idaho

USGS Publications Warehouse

Knobel, LeRoy L.; Tucker, Betty J.; Rousseau, Joseph P.

2008-01-01

Water-quality activities conducted by the staff of the U.S. Geological Survey (USGS) Idaho National Laboratory (INL) Project Office coincide with the USGS mission of appraising the quantity and quality of the Nation's water resources. The activities are conducted in cooperation with the U.S. Department of Energy's (DOE) Idaho Operations Office. Results of the water-quality investigations are presented in various USGS publications or in refereed scientific journals. The results of the studies are highly regarded, and they are used with confidence by researchers, regulatory and managerial agencies, and interested civic groups. In its broadest sense, quality assurance refers to doing the job right the first time. It includes the functions of planning for products, review and acceptance of the products, and an audit designed to evaluate the system that produces the products. Quality control and quality assurance differ in that quality control ensures that things are done correctly given the 'state-of-the-art' technology, and quality assurance ensures that quality control is maintained within specified limits.

Technology transfer from NASA to targeted industries, volume 2

NASA Technical Reports Server (NTRS)

Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

1993-01-01

This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

Technology Integration: Do They or Don't They? A Self-Report Survey from PreK through 5th Grade Professional Educators

ERIC Educational Resources Information Center

Fletcher, Donna

2006-01-01

The practice of integrating technology into classroom instruction is mandated by the State of Texas (TEA, 2005, http://www.tea.state.tx.us/teks/index.html). Using a self-report survey, this study investigated technology integration practices on two elementary campuses in a suburban, small-town independent school district, which resides on the…

Teachers' Use of Educational Technology in U.S. Public Schools: 2009. First Look. NCES 2010-040

ERIC Educational Resources Information Center

Gray, Lucinda; Thomas, Nina; Lewis, Laurie

2010-01-01

This report provides national data on the availability and use of educational technology among teachers in public elementary and secondary schools during the winter and spring of 2009. The data are the results of a national teacher-level survey that is one of a set that includes district, school, and teacher surveys on educational technology.…

Learning and Living Technologies: A Longitudinal Study of First-Year Students' Frequency and Competence in the Use of ICT

ERIC Educational Resources Information Center

Hosein, Anesa; Ramanau, Ruslan; Jones, Chris

2010-01-01

This article presents results from a longitudinal survey of first-year students' time spent on living and learning technologies at university, their frequency of using specific learning technologies and their competence with these tools. Data were analysed from two similar surveys at the start and at the end of the academic year for students…

Computer Technologies for Postsecondary Students with Disabilities. Adaptech Project = Technologies Informatiques pour les Etudiants ayant des Incapacites au Postsecondaire. Project Adaptech.

ERIC Educational Resources Information Center

Fossey, Myrtis-Eirene; Fichten, Catherine S.; Barile, Maria; Asuncion, Jennison V.

In 1999, a survey was conducted of almost 800 university students with different disabilities across Canada to investigate what computer equipment students used and wanted, how they financed their computer technologies, and why they failed to take advantage of government subsidy programs. Results from the survey indicate many students did not know…

Technology Use and Acceptance in the Classroom: Results from an Exploratory Survey Study among Secondary Education Teachers in the USA

ERIC Educational Resources Information Center

Holden, Heather; Ozok, Ant; Rada, Roy

2008-01-01

Purpose: The purpose of this study is to explore the current usage and acceptance of classroom technologies by secondary math/science education teachers in one community. Design/methodology/approach: Forty-seven secondary education math and science teachers in one American city responded to a survey about their use and perceptions of technology in…

JPRS Report, Science & Technology, USSR: Science & Technology Policy

DTIC Science & Technology

1988-09-23

number of library personnel for preparing survey -analyt- ical references, but by equipping them with modern computer hardware for acquiring information...of manpower, material, technical, and financial resources and limits of capital investments and planning, surveying , and contractual work, which...USSR State Prize for the development and introduction of a technology of the production of shampoo from fish protein. During the period under review

Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benz, Jacob M.; Tanner, Jennifer E.; Smart, Heidi A.

2016-01-18

The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

Human Factors Engineering: Current and Emerging Dual-Use Applications

NASA Technical Reports Server (NTRS)

Chandlee, G. O.; Goldsberry, B. S.

1994-01-01

Human Factors Engineering is a multidisciplinary endeavor in which information pertaining to human characteristics is used in the development of systems and machines. Six representatives considered to be experts from the public and private sectors were surveyed in an effort to identify the potential dual-use of human factors technology. Each individual was asked to provide a rating as to the dual-use of 85 identified NASA technologies. Results of the survey were as follows: nearly 75 percent of the technologies were identified at least once as high dual-use by one of the six survey respondents, and nearly 25 percent of the identified NASA technologies were identified as high dual-use technologies by a majority of the respondents. The perceived level of dual-use appeared to be independent of the technology category. Successful identification of dual-use technology requires expanded input from industry. As an adjunct, cost-benefit analysis should be conducted to identify the feasibility of the dual-use technology. Concurrent with this effort should be an examination of precedents established by other technologies in other industrial settings. Advances in human factors and systems engineering are critical to reduce risk in any workplace and to enhance industrial competitiveness.

Intranet usage and potential in acute care hospitals in the United States: survey-2000.

PubMed

Hatcher, M

2001-12-01

This paper provides the results of the Survey-2000 measuring Intranet and its potential in health care. The survey measured the levels of Internet and Intranet existence and usage in acute care hospitals. Business-to-business electronic commerce and electronic commerce for customers were measured. Since the Intranet was not studied in survey-1997, no comparisons could be made. Therefore the results were presented and discussed. The Intranet data were compared with the Internet data and statistically significant differences were presented and analyzed. This information will assist hospitals to plan Internet and Intranet technology. This is the third of three articles based upon the results of the Survey-2000. Readers are referred to prior articles by the author, which discusses the survey design and provides a tutorial on technology transfer in acute care hospitals.(1) The first article based upon the survey results discusses technology transfer, system design approaches, user involvement, and decision-making purposes. (2) The second article based upon the survey results discusses distribution of Internet usage and rating of Internet usage applied to specific applications. Homepages, advertising, and electronic commerce are discussed from an Internet perspective.

76 FR 75522 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... Recorded Interviewing (CARI) technology field test using the 2012 Survey of Income and Program Participation Event History Calendar (SIPP-EHC) Field Test questionnaire. Computer Audio Recorded Interviewing... the technology. Other tests have also been conducted on non-voluntary surveys and proved promising...

Hospital adoption of automated surveillance technology and the implementation of infection prevention and control programs.

PubMed

Halpin, Helen; Shortell, Stephen M; Milstein, Arnold; Vanneman, Megan

2011-05-01

This research analyzes the relationship between hospital use of automated surveillance technology (AST) for identification and control of hospital-acquired infections (HAI) and implementation of evidence-based infection control practices. Our hypothesis is that hospitals that use AST have made more progress implementing infection control practices than hospitals that rely on manual surveillance. A survey of all acute general care hospitals in California was conducted from October 2008 through January 2009. A structured computer-assisted telephone interview was conducted with the quality director of each hospital. The final sample includes 241 general acute care hospitals (response rate, 83%). Approximately one third (32.4%) of California's hospitals use AST for monitoring HAI. Adoption of AST is statistically significant and positively associated with the depth of implementation of evidence-based practices for methicillin-resistant Staphylococcus aureus and ventilator-associated pneumonia and adoption of contact precautions and surgical care infection practices. Use of AST is also statistically significantly associated with the breadth of hospital implementation of evidence-based practices across all 5 targeted HAI. Our findings suggest that hospitals using AST can achieve greater depth and breadth in implementing evidenced-based infection control practices. Copyright © 2011 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City

PubMed Central

Gonzalez, Miriam L.; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M.; Lowther, Deborah L.; Relyea, George; Caniza, Miguela A.

2017-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs’ satisfaction. Pearson’s chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs’ e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries. PMID:29147140

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City.

PubMed

Gonzalez, Miriam L; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M; Lowther, Deborah L; Relyea, George; Caniza, Miguela A

2016-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs' satisfaction. Pearson's chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs' e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries.

The role of hospital payments in the adoption of new medical technologies: an international survey of current practice.

PubMed

Sorenson, Corinna; Drummond, Michael; Torbica, Aleksandra; Callea, Giuditta; Mateus, Ceu

2015-04-01

This study examined the role of prospective payment systems in the adoption of new medical technologies across different countries. A literature review was conducted to provide background for the study and guide development of a survey instrument. The survey was disseminated to hospital payment systems experts in 15 jurisdictions. Fifty-one surveys were disseminated, with 34 returned. The surveys returned covered 14 of the 15 jurisdictions invited to participate. The majority (71%) of countries update the patient classification system and/or payment tariffs on an annual basis to try to account for new technologies. Use of short-term separate or supplementary payments for new technologies occurs in 79% of countries to ensure adequate funding and facilitate adoption. A minority (43%) of countries use evidence of therapeutic benefit and/or costs to determine or update payment tariffs, although it is somewhat more common in establishing short-term payments. The main barrier to using evidence is uncertain or unavailable clinical evidence. Almost three-fourths of respondents believed diagnosis-related group systems incentivize or deter technology adoption, depending on the particular circumstances. Improvements are needed, such as enhanced strategies for evidence generation and linking evidence of value to payments, national and international collaboration and training to improve existing practice, and flexible timelines for short-term payments. Importantly, additional research is needed to understand how different payment policies impact technology uptake as well as quality of care and costs.

INNOVATIVE ACOUSTIC SENSOR TECHNOLOGIES FOR LEAK DETECTION IN CHALLENGING PIPE TYPES

DTIC Science & Technology

2016-12-30

through focused acoustic surveys that are typically conducted at the correlated location prior to marking the leak location. All three technologies were...shift” survey with cross- correlation Echologics LeakFinderRTT M Field survey of leak signatures. Recommended every 3-5 years Contractor...cross- correlation features to detect and pinpoint leaks in challenging pipe types, as well as metallic pipes. 15. SUBJECT TERMS Leak detection

'We don't even have Wi-Fi': a descriptive study exploring current use and availability of communication technologies in residential aged care.

PubMed

Moyle, Wendy; Jones, Cindy; Murfield, Jenny; Dwan, Toni; Ownsworth, Tamara

2018-02-01

There has been significant growth in communication technologies. However, it is unknown to what extent RACFs accommodate such technologies. To explore the use and availability of communication technologies for use by residents within RACFs in Queensland, Australia. A descriptive, structured telephone survey. Every 10th alphabetically listed facility from a total sample of n = 462 were telephoned and staff were invited to complete the survey. Forty-one out of a total of 93 RACFs completed the survey. The telephone was by far the primary form of communication used by residents to communicate with family and friends (n = 40; 97.6%). Conversely, the use of web-connection communication software (Skype or similar) was uncommon. The use and availability of communication technologies is limited within RACFs, highlighting a significant lag in the uptake within the sector.

A Survey of Research in Supervisory Control and Data Acquisition (SCADA)

DTIC Science & Technology

2014-09-01

distance learning .2 The data acquired may be operationally oriented and used to better run the system, or it could be strategic in nature and used to...Technically the SCADA system is composed of the information technology (IT) that provides the human- machine interface (HMI) and stores and analyzes the data...systems work by learning what normal or benign traffic is and reporting on any abnormal traffic. These systems have the potential to detect zero-day

Kepler Mission Design, Realized Photometric Performance, and Early Science

DTIC Science & Technology

2010-04-20

USA 19 Institute for Astronomy, University of Hawaii, Honolulu, HI 96822, USA 20 Ball Aerospace and Technologies Corp., Boulder, CO 80306, USA 21...was to perform multi-band photometric observations using a filter set similar to the Sloan Survey (g, r, i, z ) with the addition of a filter for the...Dynamic range 7 Kp 17 Meets photometric precision Operating temperature −85 ◦C 10 mK stability Controller Ball Aerospace Design and manufacturer

Impact of Export Control and Technology Transfer Regimes: International Perspectives

DTIC Science & Technology

2012-01-07

major national security and public policy issue. Exploring the ITAR environment through a set of case studies was the central idea in a project...cover) was based on a survey of UK stakeholders. The results were unambiguous and striking. Our British partners conclude ITAR is a good idea gone...ITAR) regime is a major national security and public policy issue. Exploring the ITAR environment through a set of case studies was the central idea

[Survey and analysis of radiation safety education at radiological technology schools].

PubMed

Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

2004-10-01

We carried out a questionnaire survey of all radiological technology schools, to investigate the status of radiation safety education. The questionnaire consisted of questions concerning full-time teachers, measures being taken for the Radiation Protection Supervisor Qualifying Examination, equipment available for radiation safety education, radiation safety education for other departments, curriculum of radiation safety education, and related problems. The returned questionnaires were analyzed according to different groups categorized by form of education and type of establishment. The overall response rate was 55%, and there were statistically significant differences in the response rates among the different forms of education. No statistically significant differences were found in the items relating to full-time teachers, measures for Radiation Protection Supervisor Qualifying Examination, and radiation safety education for other departments, either for the form of education or type of establishment. Queries on the equipment used for radiation safety education revealed a statistically significant difference in unsealed radioisotope institutes among the forms of education. In terms of curriculum, the percentage of radiological technology schools which dealt with neither the shielding calculation method for radiation facilities nor with the control of medical waste was found to be approximately 10%. Other educational problems that were indicated included shortages of full-time teachers and equipment for radiation safety education. In the future, in order to improve radiation safety education at radiological technology schools, we consider it necessary to develop unsealed radioisotope institutes, to appoint more full-time teachers, and to educate students about risk communication.

Infection prevention practices in adult intensive care units in a large community hospital system after implementing strategies to reduce health care-associated, methicillin-resistant Staphylococcus aureus infections.

PubMed

Moody, Julia; Septimus, Edward; Hickok, Jason; Huang, Susan S; Platt, Richard; Gombosev, Adrijana; Terpstra, Leah; Avery, Taliser; Lankiewicz, Julie; Perlin, Jonathan B

2013-02-01

A range of strategies and approaches have been developed for preventing health care-associated infections. Understanding the variation in practices among facilities is necessary to improve compliance with existing programs and aid the implementation of new interventions. In 2009, HCA Inc administered an electronic survey to measure compliance with evidence-based infection prevention practices as well as identify variation in products or methods, such as use of special approach technology for central vascular catheters and ventilator care. Responding adult intensive care units (ICUs) were those considering participation in a clinical trial to reduce health care-associated infections. Responses from 99 ICUs in 55 hospitals indicated that many evidenced-based practices were used consistently, including methicillin-resistant Staphylococcus aureus (MRSA) screening and use of contact precautions for MRSA-positive patients. Other practices exhibited wide variability including discontinuation of precautions and use of antimicrobial technology or chlorhexidine patches for central vascular catheters. MRSA decolonization was not a predominant practice in ICUs. In this large, community-based health care system, there was substantial variation in the products and methods to reduce health care-associated infections. Despite system-wide emphasis on basic practices as a precursor to adding special approach technologies, this survey showed that these technologies were commonplace, including in facilities where improvement in basic practices was needed. Copyright © 2013 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Erosion monitoring along the Coosa River below Logan Martin Dam near Vincent, Alabama, using terrestrial light detection and ranging (T-LiDAR) technology

USGS Publications Warehouse

Kimbrow, Dustin R.; Lee, Kathryn G.

2013-01-01

Alabama Power operates a series of dams on the Coosa River in east central Alabama. These dams form six reservoirs that provide power generation, flood control, recreation, economic opportunity, and fish and wildlife habitats to the region. The Logan Martin Reservoir is located approximately 45 kilometers east of Birmingham and borders Saint Clair and Talladega Counties. Discharges below the reservoir are controlled by power generation at Logan Martin Dam, and there has been an ongoing concern about the stability of the streambanks downstream of the dam. The U.S. Geological Survey, in cooperation with Alabama Power conducted a scientific investigation of the geomorphic conditions of a 115-meter length of streambank along the Coosa River by using tripod-mounted terrestrial light detection and ranging technology. Two surveys were conducted before and after the winter flood season of 2010 to determine the extent and magnitude of geomorphic change. A comparison of the terrestrial light detection and ranging datasets indicated that approximately 40 cubic meters of material had been eroded from the upstream section of the study area. The terrestrial light detection and ranging data included in this report consist of electronic point cloud files containing several million georeferenced data points, as well as a surface model measuring changes between scans.

Enhancing the Safety, Security and Resilience of ICT and Scada Systems Using Action Research

NASA Astrophysics Data System (ADS)

Johnsen, Stig; Skramstad, Torbjorn; Hagen, Janne

This paper discusses the results of a questionnaire-based survey used to assess the safety, security and resilience of information and communications technology (ICT) and supervisory control and data acquisition (SCADA) systems used in the Norwegian oil and gas industry. The survey identifies several challenges, including the involvement of professionals with different backgrounds and expertise, lack of common risk perceptions, inadequate testing and integration of ICT and SCADA systems, poor information sharing related to undesirable incidents and lack of resilience in the design of technical systems. Action research is proposed as a process for addressing these challenges in a systematic manner and helping enhance the safety, security and resilience of ICT and SCADA systems used in oil and gas operations.

The Sea-Floor Mapping Facility at the U.S. Geological Survey Woods Hole Field Center, Woods Hole, Massachusetts

USGS Publications Warehouse

Deusser, Rebecca E.; Schwab, William C.; Denny, Jane F.

2002-01-01

Researchers of the sea-floor mapping facility at the U.S. Geological Survey (USGS) Woods Hole Field Center in Woods Hole, Mass., use state-of-the-art technology to produce accurate geologic maps of the sea floor. In addition to basic bathymetry and morphology, sea-floor maps may contain information about the distribution of sand resources, patterns of coastal erosion, pathways of pollutant transport, and geologic controls on marine biological habitats. The maps may also show areas of human impacts, such as disturbance by bottom fishing and pollution caused by offshore waste disposal. The maps provide a framework for scientific research and provide critical information to decisionmakers who oversee resources in the coastal ocean.

SmartShape™ technology. Modifying the shape of the beef cuberoll and the consumer response to shaped scotch fillet steaks.

PubMed

Taylor, Johanne; van de Ven, Remy; Hopkins, David L

2014-03-01

SmartShape™ is a novel meat processing technology that uses air pressure to compress and elongate whole cold-boned primals and packages them to retain form. A two stage study was conducted. The first stage established the ability of the SmartShape™ treated beef cube roll (m. longissimus lumborum) to retain shape in a commercial setting. Twelve hours chilling time following treatment was found to be adequate for steaks to retain their shape for up to 24h after slicing. Steak shape and size did not change substantially until after cooking, when the steaks looked less formed. In the second stage a survey was conducted of 421 consumers to clarify the response to the shaping of a subset of raw and cooked scotch fillet steaks. There was no difference in preference for shaped or control steaks. A secondary survey found that informed consumers were more amenable to the SmartShape™ scotch fillet steaks presented here, but would not pay a premium for them. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

A survey of life support system automation and control

NASA Technical Reports Server (NTRS)

Finn, Cory K.

1993-01-01

The level of automation and control necessary to support advanced life support systems for use in the manned space program is steadily increasing. As the length and complexity of manned missions increase, life support systems must be able to meet new space challenges. Longer, more complex missions create new demands for increased automation, improved sensors, and improved control systems. It is imperative that research in these key areas keep pace with current and future developments in regenerative life support technology. This paper provides an overview of past and present research in the areas of sensor development, automation, and control of life support systems for the manned space program, and it discusses the impact continued research in several key areas will have on the feasibility, operation, and design of future life support systems.

Results of the Trace Contaminant Control Needs Evaluation and Sizing Study for Space Suit Life Support Development

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.

2009-01-01

The Trace Contaminant Control System (TCCS), located within the ventilation loop of the Portable Life Support System (PLSS) of the Constellation Space Suit Element (CSSE), is responsible for removing hazardous trace contaminants from the space suit ventilation flow. This paper summarizes the results of a trade study that evaluated if trace contaminant control could be accomplished without a TCCS, relying on suit leakage, ullage loss from the carbon dioxide and humidity control system, and other factors. Trace contaminant generation rates were revisited to verify that values reflect the latest designs for CSSE pressure garment materials and PLSS hardware. Additionally, TCCS sizing calculations were performed and a literature survey was conducted to review the latest developments in trace contaminant technologies.

Survey on Monitoring and Quality Controlling of the Mobile Biosignal Delivery.

PubMed

Pawar, Pravin A; Edla, Damodar R; Edoh, Thierry; Shinde, Vijay; van Beijnum, Bert-Jan

2017-10-31

A Mobile Patient Monitoring System (MPMS) acquires patient's biosignals and transmits them using wireless network connection to the decision-making module or healthcare professional for the assessment of patient's condition. A variety of wireless network technologies such as wireless personal area networks (e.g., Bluetooth), mobile ad-hoc networks (MANET), and infrastructure-based networks (e.g., WLAN and cellular networks) are in practice for biosignals delivery. The wireless network quality-of-service (QoS) requirements of biosignals delivery are mainly specified in terms of required bandwidth, acceptable delay, and tolerable error rate. An important research challenge in the MPMS is how to satisfy QoS requirements of biosignals delivery in the environment characterized by patient mobility, deployment of multiple wireless network technologies, and variable QoS characteristics of the wireless networks. QoS requirements are mainly application specific, while available QoS is largely dependent on QoS provided by wireless network in use. QoS provisioning refers to providing support for improving QoS experience of networked applications. In resource poor conditions, application adaptation may also be required to make maximum use of available wireless network QoS. This survey paper presents a survey of recent developments in the area of QoS provisioning for MPMS. In particular, our contributions are as follows: (1) overview of wireless networks and network QoS requirements of biosignals delivery; (2) survey of wireless networks' QoS performance evaluation for the transmission of biosignals; and (3) survey of QoS provisioning mechanisms for biosignals delivery in MPMS. We also propose integrating end-to-end QoS monitoring and QoS provisioning strategies in a mobile patient monitoring system infrastructure to support optimal delivery of biosignals to the healthcare professionals.

Advanced lighting guidelines: 1993. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eley, C.; Tolen, T.M.; Benya, J.R.

1993-12-31

The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halidemore » and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.« less

A patent survey case: how could technological forecasting help cosmetic chemists with product innovation?

PubMed

Domicio Da Silva Souza, Ivan; Juliana Pinheiro, Bárbara; Passarini Takahashi, Vania

2012-01-01

Patents represent a free and open source of data for studying innovation and forecasting technological trends. Thus, we suggest that new discussions about the role of patent information are needed. To illustrate the relevance of this issue, we performed a survey of patents involving skin care products, which were granted by the United States Patent and Trademark Office (USPTO) between 2006 and 2010, to identify opportunities for innovation and technological trends. We quantified the use of technologies in 333 patents. We plotted a life cycle of technologies related to natural ingredients. We also determined the cross impact of the technologies identified. We observed technologies related to processes applied to cosmetics (2.2%), functional packaging and applicators (2.9%), excipients and active compounds (21.5%), and cosmetic preparations (73.5%). Further, 21.6% of the patents were related to the use of natural ingredients. Several opportunities for innovation were discussed throughout this paper, for example, the use of peptides as active compounds or intracellular carriers (only 3.9% of the technologies in cosmetic preparations). We also observed technological cross impacts that suggested a trend toward multifunctional cosmetics, among others. Patent surveys may help researchers with product innovation because they allow us to identify available and unexplored technologies and turn them into whole new concepts.

Navy-wide Personnel Survey (NPS) 2000: Statistical Tables of Survey Results for Officers and Enlisted Sailors

DTIC Science & Technology

2003-09-01

Navy Personnel Research, Studies, and Technology Department Navy Personnel Command (NPRST/PERS-1) Millington, TN, 38055-1000 NPRST-TN-03-10... Technology 5720 Integrity Drive Millington, Tennessee 38055-1400 NPRST-TN-03-10 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES... Technology Department Navy Personnel Command 5720 Integrity Drive Millington, TN 38055-1400 www.nprst.navy.mil v Foreword Administered biennially

Web app based patient education in psoriasis - a randomized controlled trial.

PubMed

Hawkins, Spencer D; Barilla, Steven; Feldman, Steven R

2017-04-15

Patients report wanting more information about psoriasis and clear expectations from the onset of therapy. Dermatologists do not think patients receive or internalize adequate information. There isa need for further explanation of treatment regimens to increase knowledge, compliance, and patient satisfaction. Recent advancements in web technology have the potential to improve these psoriasis outcomes. A web based application was created to educate psoriasis patients using video, graphics, and textual information. An investigator blinded, randomized, controlled study evaluated the website's efficacy in 50 psoriasis patients at Wake Forest Baptist Health Dermatology. Patients were randomized into two groups: Group 1 received a link to the educational web app and a survey following their visit; Group 2 received a link to the survey with no educational web app. The survey assessed patient knowledge, self reported adherence to medication, and adequacy of addressing concerns. Twenty two patients completed the study. Patients in the web app group scored an average of 11/14 on the psoriasis knowledge quiz, whereas patients in the control group scored an average of 9/14 for an improvement of roughly 18% (p=0.008, n=22). Web app based education via DermPatientEd.Com is an efficient way to improve knowledge, but we did not demonstrate improvements in self-reported medication adherence or the ability to address concerns of psoriasis patients.

Development of Android Based Powered Intelligent Wheelchair for Quadriplegic Persons

NASA Astrophysics Data System (ADS)

Gupta, Ashutosh; Ghosh, Tathagata; Kumar, Pradeep; Bhawna, Shruthi. S.

2017-08-01

Several surveys give us the view that both children and adults benefit substantially from access towards independent mobility. With the inventions of technology, no individuals are satisfied with traditional manual operated machines. To accommodate population, researchers are using technology, originally developed for mobile robots to create ‘intelligent wheelchairs’. It’s a major challenge for quadriplegic persons as they really find it difficult to manipulate powered wheelchair during the activities of their daily living. As the Smartphone era has evolved with innovative android based applications, engineers are improving and trying to make such machines simple and cheap to the next level. In this paper, we present a development of android based powered intelligent wheelchair to assist the quadriplegic person by making them self sufficient in controlling the wheelchair. The wheels of the chair can be controlled by the voice or gesture movement or by touching the screen of the android app by the challenged persons. The system uses the Bluetooth communication to interface the microcontroller and the inbuilt sensors in the android Smartphone. According to the commands received from android phone, the kinematics of the wheels are controlled.

Combustion Sensors: Gas Turbine Applications

NASA Technical Reports Server (NTRS)

Human, Mel

2002-01-01

This report documents efforts to survey the current research directions in sensor technology for gas turbine systems. The work is driven by the current and future requirements on system performance and optimization. Accurate real time measurements of velocities, pressure, temperatures, and species concentrations will be required for objectives such as combustion instability attenuation, pollutant reduction, engine health management, exhaust profile control via active control, etc. Changing combustor conditions - engine aging, flow path slagging, or rapid maneuvering - will require adaptive responses; the effectiveness of such will be only as good as the dynamic information available for processing. All of these issues point toward the importance of continued sensor development. For adequate control of the combustion process, sensor data must include information about the above mentioned quantities along with equivalence ratios and radical concentrations, and also include both temporal and spatial velocity resolution. Ultimately these devices must transfer from the laboratory to field installations, and thus must become low weight and cost, reliable and maintainable. A primary conclusion from this study is that the optics-based sensor science will be the primary diagnostic in future gas turbine technologies.

2000 Survey of Distributed Spacecraft Technologies and Architectures for NASA's Earth Science Enterprise in the 2010-2025 Timeframe

NASA Technical Reports Server (NTRS)

Ticker, Ronald L.; Azzolini, John D.

2000-01-01

The study investigates NASA's Earth Science Enterprise needs for Distributed Spacecraft Technologies in the 2010-2025 timeframe. In particular, the study focused on the Earth Science Vision Initiative and extrapolation of the measurement architecture from the 2002-2010 time period. Earth Science Enterprise documents were reviewed. Interviews were conducted with a number of Earth scientists and technologists. fundamental principles of formation flying were also explored. The results led to the development of four notional distribution spacecraft architectures. These four notional architectures (global constellations, virtual platforms, precision formation flying, and sensorwebs) are presented. They broadly and generically cover the distributed spacecraft architectures needed by Earth Science in the post-2010 era. These notional architectures are used to identify technology needs and drivers. Technology needs are subsequently grouped into five categories: Systems and architecture development tools; Miniaturization, production, manufacture, test and calibration; Data networks and information management; Orbit control, planning and operations; and Launch and deployment. The current state of the art and expected developments are explored. High-value technology areas are identified for possible future funding emphasis.

Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, M.; Zhao, P.

2016-03-24

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energymore » Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.« less

"iM Ready to Learn": Undergraduate Nursing Students Knowledge, Preferences, and Practice of Mobile Technology and Social Media.

PubMed

Hay, Benjamin; Carr, Peter J; Dawe, Lydia; Clark-Burg, Karen

2017-01-01

The purpose of this study was to identify in what way social media and mobile technology assist with learning and education of the undergraduate nurse. The study involved undergraduate nursing students across three campuses from the University of Notre Dame Australia. Participants were invited to complete an online questionnaire that related to their current knowledge, preferences, and practice with mobile technology and social media within their undergraduate nursing degree. A quantitative descriptive survey design was adapted from an initial pilot survey by the authors. A total of 386 nursing students (23.47% of the total enrolment) completed the online survey. Overall, results suggested that students are more supportive of social media and mobile technology in principle than in practice. Students who frequently use mobile technologies prefer to print out, highlight, and annotate the lecture material. Findings suggest that nursing students currently use mobile technology and social media and are keen to engage in ongoing learning and collaboration using these resources. Therefore, nursing academia should encourage the appropriate use of mobile technology and social media within the undergraduate curriculum so that responsible use of such technologies positively affects the future nursing workforce.

Network design and quality checks in automatic orientation of close-range photogrammetric blocks.

PubMed

Dall'Asta, Elisa; Thoeni, Klaus; Santise, Marina; Forlani, Gianfranco; Giacomini, Anna; Roncella, Riccardo

2015-04-03

Due to the recent improvements of automatic measurement procedures in photogrammetry, multi-view 3D reconstruction technologies are becoming a favourite survey tool. Rapidly widening structure-from-motion (SfM) software packages offer significantly easier image processing workflows than traditional photogrammetry packages. However, while most orientation and surface reconstruction strategies will almost always succeed in any given task, estimating the quality of the result is, to some extent, still an open issue. An assessment of the precision and reliability of block orientation is necessary and should be included in every processing pipeline. Such a need was clearly felt from the results of close-range photogrammetric surveys of in situ full-scale and laboratory-scale experiments. In order to study the impact of the block control and the camera network design on the block orientation accuracy, a series of Monte Carlo simulations was performed. Two image block configurations were investigated: a single pseudo-normal strip and a circular highly-convergent block. The influence of surveying and data processing choices, such as the number and accuracy of the ground control points, autofocus and camera calibration was investigated. The research highlights the most significant aspects and processes to be taken into account for adequate in situ and laboratory surveys, when modern SfM software packages are used, and evaluates their effect on the quality of the results of the surface reconstruction.

Survey of Rural Information Infrastructure Technologies.

ERIC Educational Resources Information Center

Allen, Kenneth C.; And Others

Communication and information technologies can reduce the barriers of distance and space that disadvantage rural areas. This report defines a set of distinct voice, computer, and video telecommunication services; describes several rural information applications that make use of these services; and surveys various wireline and wireless systems and…

Vehicle-to-Vehicle crash avoidance technology : public acceptance final report.

DOT National Transportation Integrated Search

2015-12-01

The Vehicle-to-Vehicle (V2V) Crash Avoidance Public Acceptance report summarizes data from a survey of the current level of awareness and acceptance of V2V technology. The survey was guided by findings from prior studies and 12 focus groups. A total ...

Campus Computing, 2000: The 11th National Survey of Computing and Information Technology in American Higher Education.

ERIC Educational Resources Information Center

Green, Kenneth C.

The 2000 Campus Computing Survey, the 11th such survey, was sent to the chief academic officer at 1,176 two-year and four-year colleges and universities across the United States. By October 2000, 506 responses had been received, a response rate of 43%. New data reveal that the growing demand for technology talent across all sectors of the U.S.…

Cyber Technology for Materials and Structures in Aeronautics and Aerospace

NASA Technical Reports Server (NTRS)

Pipes, R. Byron

1999-01-01

This report summarizes efforts undertaken during the 1998-99 program year and includes a survey of the field of computational mechanics, a discussion of biomimetics and intelligent simulation, a survey of the field of biomimetics, an illustration of biomimetics and computational mechanics through the example of the high performance composite tensile structure. In addition, the preliminary results of a state-of-the art survey of composite materials technology is presented.

Beginning secondary science teachers' instructional use of educational technology during the induction year

NASA Astrophysics Data System (ADS)

McNall, Rebecca Lee

This study explored how 10 beginning secondary science teachers who had completed the newly revised technology-integrated science teacher education program at the University of Virginia used educational technology in their science instruction during the induction year. Nine of the beginning teachers taught in Virginia or Maryland high schools, while one taught overseas in an international school. Participants taught biology, earth science, chemistry, physics, or general science. A revised version of the Technology Usage and Needs of Science Teachers survey (Pedersen & Yerrick, 2000) was administered to all 10 participants in early fall 2002 and late spring 2003 to assess their confidence using educational technology tools in teaching science. Follow-up interviews were conducted with all participants subsequent to survey administration to explore their views toward educational technology as an instructional tool, their use of educational technology in science instruction, and factors influencing their use. In addition, four participants were purposefully selected to characterize participants' instructional use of educational technology and to increase the likelihood of observing its use. Selection criteria of this subgroup included factors summarized from the research literature: (a) high confidence using educational technology, (b) strong intent to use educational technology instructionally, (c) access to technology tools, and (d) collegial or technology support. Survey responses were analyzed using descriptive statistics, and interview and classroom observation data were analyzed using analytic induction methods developed by Erickson (1986). Analysis of survey responses indicated that participants were confident using educational technology tools in science instruction and were most confident using word processing, spreadsheets, PowerPoint, and telecommunications applications. Classroom observations and interview responses indicated that participants used educational technology to provide visual representations of science concepts, support authentic science explorations and inquiry, and create real-world connections to science content. Limited access to educational technology resources, unfamiliarity with the curriculum, and limited time were factors limiting their use. While participants used educational technology less than they had originally intended, they continued to believe educational technology was a potentially powerful tool for teaching science and planned to continue to explore ways of incorporating it in their science instruction.

Bridging the Divide: Using UTAUT to predict multigenerational tablet adoption practices.

PubMed

Magsamen-Conrad, Kate; Upadhyaya, Shrinkhala; Joa, Claire Youngnyo; Dowd, John

2015-09-01

This study examined the "Unified Theory of Acceptance and Use of Technology" (UTAUT) in the context of tablet devices across multiple generations. We tested the four UTAUT determinants, performance expectancy, effort expectancy, social influence, and facilitating conditions, to determine their contributions for predicting behavioral intention to use tablets with age, gender, and user experience as moderators. 899 respondents aged 19-99 completed the survey. We found consistent generational differences in UTAUT determinants, most frequently between the oldest and youngest generations. Effort expectancy and facilitating conditions were the only determinants that positively predicted tablet use intentions after controlling for age, gender, and tablet use. We also discuss the implications of ageism and gender discrimination of technology adoption. Finally, we argue that our findings can be extended to create effective training programs for the teaching, learning, and adoption of new technologies in a variety of organizational settings.

NASA Airborne Science Program: NASA Stratospheric Platforms

NASA Technical Reports Server (NTRS)

Curry, Robert E.

2010-01-01

The National Aeronautics and Space Administration conducts a wide variety of remote sensing projects using several unique aircraft platforms. These vehicles have been selected and modified to provide capabilities that are particularly important for geophysical research, in particular, routine access to very high altitudes, long range, long endurance, precise trajectory control, and the payload capacity to operate multiple, diverse instruments concurrently. While the NASA program has been in operation for over 30 years, new aircraft and technological advances that will expand the capabilities for airborne observation are continually being assessed and implemented. This presentation will review the current state of NASA's science platforms, recent improvements and new missions concepts as well as provide a survey of emerging technologies unmanned aerial vehicles for long duration observations (Global Hawk and Predator). Applications of information technology that allow more efficient use of flight time and the ability to rapidly reconfigure systems for different mission objectives are addressed.

Alaska's renewable energy potential.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2009-02-01

This paper delivers a brief survey of renewable energy technologies applicable to Alaska's climate, latitude, geography, and geology. We first identify Alaska's natural renewable energy resources and which renewable energy technologies would be most productive. e survey the current state of renewable energy technologies and research efforts within the U.S. and, where appropriate, internationally. We also present information on the current state of Alaska's renewable energy assets, incentives, and commercial enterprises. Finally, we escribe places where research efforts at Sandia National Laboratories could assist the state of Alaska with its renewable energy technology investment efforts.

Patient perceptions of environmental control units: experiences of Veterans with spinal cord injuries and disorders receiving inpatient VA healthcare.

PubMed

Etingen, Bella; Martinez, Rachael N; Vallette, Marissa A; Dendinger, Ryan; Bidassie, Balmatee; Miskevics, Scott; Khan, Hira T; Cozart, Huberta T; Locatelli, Sara M; Weaver, Frances M

2018-05-01

To assess patients' perceptions of environmental control units (ECUs) at Veterans Affairs Spinal Cord Injury Centers. A brief questionnaire was conducted with patients in real-time while they were hospitalised ("on-the-spot questionnaire"); a survey was mailed to patients who had recently been discharged from a hospital stay ("discharge survey"). Data were analysed using descriptive statistics. Seventy on-the-spot questionnaires and 80 discharge surveys were collected. ECU features used most frequently were comparable in responses from both surveys: watching TV/movies (81%, 85%), calling the nurse (68%, 61%), turning lights on/off (63%, 52%), adjusting the bed (53%, 33%), and playing games (39%, 24%). Many on-the-spot questionnaire respondents felt the ECU met their need for independence a great deal (42%). Most respondents to both surveys were satisfied with the ECU (71%, 57%). Areas for improvement included user training, improved functionality of the device and its features, and device design. ECUs were well-accepted by persons with spinal cord injuries/disorders (SCI/D) in the inpatient setting, and increased patients' perceptions of independence. To maximise usability and satisfaction, facilities should ensure that comprehensive training on ECU use and features available is offered to all patients, and resources are available for timely troubleshooting and maintenance. Implications for rehabilitation An environmental control unit (ECU) is a form of assistive technology that allows individuals with disabilities (such as spinal cord injuries and disorders [SCI/D]) to control functional and entertainment-related aspects of their environment. ECU use can increase functioning, independence and psychosocial well-being among individuals with SCI/D, by allowing users to reclaim control over day-to-day activities that are otherwise limited by their disability. Our study results indicate that, among persons with SCI/D, ECUs are well-accepted and increase perceptions of independence. To maximise usability and patient satisfaction, facilities should ensure that comprehensive training on how to use ECUs and what features are available is offered to all patients, and resources are available for timely troubleshooting and maintenance.

Sleep technologists educational needs assessment: a survey of polysomnography, electroneurodiagnostic technology, and respiratory therapy education program directors.

PubMed

Wells, Mary Ellen; Vaughn, Bradley V

2013-10-15

In this study, we assessed the community and educational needs for sleep technologists by surveying program directors of nationally accredited polysomnography, electroneurodiagnostic technology, and respiratory care educational programs. Currently, little is known about our educational capacity and the need for advanced degrees for sleep medicine technical support. A questionnaire was developed about current and future community and educational needs for sleep technologists. The questionnaire was sent to directors of CAAHEP-accredited polysomnography and electroneurodiagnostic technology programs (associate degree and certificate programs), and directors of CoARC-accredited respiratory therapy associate degree and bachelor degree programs (n = 358). Qualitative and quantitative data were collected via an internet survey tool. Data analysis was conducted with the IBM SPSS statistical package and included calculating means and standard deviations of the frequency of responses. Qualitative data was analyzed and classified based on emerging themes. One hundred seven of 408 program directors completed the survey. Seventy-four percent agreed that demand for qualified sleep technologists will increase, yet 50% of those surveyed believe there are not enough educational programs to meet the demand. Seventy-eight percent of those surveyed agreed that the educational requirements for sleep technologists will soon increase; 79% of those surveyed believe sleep centers have a need for technologists with advanced training or specialization. Our study shows educators of associate and certificate degree programs believe there is a need for a bachelor's degree in sleep science and technology.

Invasive brain-machine interfaces: a survey of paralyzed patients' attitudes, knowledge and methods of information retrieval.

PubMed

Lahr, Jacob; Schwartz, Christina; Heimbach, Bernhard; Aertsen, Ad; Rickert, Jörn; Ball, Tonio

2015-08-01

Brain-machine interfaces (BMI) are an emerging therapeutic option that can allow paralyzed patients to gain control over assistive technology devices (ATDs). BMI approaches can be broadly classified into invasive (based on intracranially implanted electrodes) and noninvasive (based on skin electrodes or extracorporeal sensors). Invasive BMIs have a favorable signal-to-noise ratio, and thus allow for the extraction of more information than noninvasive BMIs, but they are also associated with the risks related to neurosurgical device implantation. Current noninvasive BMI approaches are typically concerned, among other issues, with long setup times and/or intensive training. Recent studies have investigated the attitudes of paralyzed patients eligible for BMIs, particularly patients affected by amyotrophic lateral sclerosis (ALS). These studies indicate that paralyzed patients are indeed interested in BMIs. Little is known, however, about the degree of knowledge among paralyzed patients concerning BMI approaches or about how patients retrieve information on ATDs. Furthermore, it is not yet clear if paralyzed patients would accept intracranial implantation of BMI electrodes with the premise of decoding improvements, and what the attitudes of a broader range of patients with diseases such as stroke or spinal cord injury are towards this new kind of treatment. Using a questionnaire, we surveyed 131 paralyzed patients for their opinions on invasive BMIs and their attitude toward invasive BMI treatment options. The majority of the patients knew about and had a positive attitude toward invasive BMI approaches. The group of ALS patients was especially open to the concept of BMIs. The acceptance of invasive BMI technology depended on the improvements expected from the technology. Furthermore, the survey revealed that for paralyzed patients, the Internet is an important source of information on ATDs. Websites tailored to prospective BMI users should be further developed to provide reliable information to patients, and also to help to link prospective BMI users with researchers involved in the development of BMI technology.

Invasive brain-machine interfaces: a survey of paralyzed patients’ attitudes, knowledge and methods of information retrieval

NASA Astrophysics Data System (ADS)

Lahr, Jacob; Schwartz, Christina; Heimbach, Bernhard; Aertsen, Ad; Rickert, Jörn; Ball, Tonio

2015-08-01

Objective. Brain-machine interfaces (BMI) are an emerging therapeutic option that can allow paralyzed patients to gain control over assistive technology devices (ATDs). BMI approaches can be broadly classified into invasive (based on intracranially implanted electrodes) and noninvasive (based on skin electrodes or extracorporeal sensors). Invasive BMIs have a favorable signal-to-noise ratio, and thus allow for the extraction of more information than noninvasive BMIs, but they are also associated with the risks related to neurosurgical device implantation. Current noninvasive BMI approaches are typically concerned, among other issues, with long setup times and/or intensive training. Recent studies have investigated the attitudes of paralyzed patients eligible for BMIs, particularly patients affected by amyotrophic lateral sclerosis (ALS). These studies indicate that paralyzed patients are indeed interested in BMIs. Little is known, however, about the degree of knowledge among paralyzed patients concerning BMI approaches or about how patients retrieve information on ATDs. Furthermore, it is not yet clear if paralyzed patients would accept intracranial implantation of BMI electrodes with the premise of decoding improvements, and what the attitudes of a broader range of patients with diseases such as stroke or spinal cord injury are towards this new kind of treatment. Approach. Using a questionnaire, we surveyed 131 paralyzed patients for their opinions on invasive BMIs and their attitude toward invasive BMI treatment options. Main results. The majority of the patients knew about and had a positive attitude toward invasive BMI approaches. The group of ALS patients was especially open to the concept of BMIs. The acceptance of invasive BMI technology depended on the improvements expected from the technology. Furthermore, the survey revealed that for paralyzed patients, the Internet is an important source of information on ATDs. Significance. Websites tailored to prospective BMI users should be further developed to provide reliable information to patients, and also to help to link prospective BMI users with researchers involved in the development of BMI technology.

The Department of Defense Small Business Innovation Research and Small Business Technology Transfer Programs: Implementation of the Commercialization Pilot Program and Related Reforms

DTIC Science & Technology

2011-06-01

testing and evaluation of SBIR and STTR technologies in SBIR and STTR Phases II and III. The implementation requirements were specified in the text of...manufacturing technologies through the SBIR and STTR programs. Fourth, Congress clarified the authority to conduct testing and evaluation of SBIR and STTR...17  A.  SURVEY GOALS ..........................................................................................17  B.  SURVEY DESIGN

Third Earth Resources Technology Satellite-1 Symposium. Volume 1: Technical Presentations, section A

NASA Technical Reports Server (NTRS)

Freden, S. C. (Compiler); Mercanti, E. P. (Compiler); Becker, M. A. (Compiler)

1974-01-01

Papers presented at the Third Symposium on Significant Results Obtained from the first Earth Resources Technology Satellite covered the areas of: agriculture, forestry, range resources, land use, mapping, mineral resources, geological structure, landform surveys, water resources, marine resources, environment surveys, and interpretation techniques.

The Training Needs of Michigan Automobile Suppliers: Initial Report.

ERIC Educational Resources Information Center

Jacobs, James

In June 1985, a survey was sent by the Industrial Technology Institute to 397 Michigan automobile supplier firms concerning their industrial training in modern manufacturing technologies. The purposes of this survey were to investigate the training needs of Michigan automobile suppliers, with particular emphasis on how they met their training…

A Survey of New Communications Technologies and Their Uses.

ERIC Educational Resources Information Center

Ploman, Edward W.

The present survey focuses on certain major developments in various countries which are of immediate relevance to the production, distribution, reception and uses of new communications technologies and media; i.e., satellite communications, cable television, videograms and new forms of video-production. Technical explanations have been avoided,…

Current Educational Technology Research Trends in Japan

ERIC Educational Resources Information Center

Nakayama, Minoru; Ueno, Maomi

2009-01-01

To examine trends in educational practice research, this article conducted a survey and analysis of factors affecting the review of research papers in the field of the educational technology in Japan. Two factors, namely, practical orientation and theoretical orientation, were extracted from 63 survey responses, and scores from members of a…

Advanced Technological Education Program Fact Sheet, June 2007

ERIC Educational Resources Information Center

Ritchie, Liesel A.; Gullickson, Arlen R.; Wygant, Barbara

2007-01-01

This fact sheet summarizes data gathered in the 2007 annual survey for the National Science Foundation's (NSF) Advanced Technological Education (ATE) program. This was the eighth annual survey of ATE projects and centers conducted by The Evaluation Center at Western Michigan University. Included here are statistics about the program's grantees and…

Web Surveys to Digital Movies: Technological Tools of the Trade.

ERIC Educational Resources Information Center

Fetterman, David M.

2002-01-01

Highlights some of the technological tools used by educational researchers today, focusing on data collection related tools such as Web surveys, digital photography, voice recognition and transcription, file sharing and virtual office, videoconferencing on the Internet, instantaneous chat and chat rooms, reporting and dissemination, and digital…

A Mobile Health Platform for Clinical Monitoring in Early Psychosis: Implementation in Community-Based Outpatient Early Psychosis Care

PubMed Central

Iosif, Ana-Maria; Zakskorn, Lauren N; Nye, Kathleen E; Zia, Aqsa; Niendam, Tara Ann

2018-01-01

Background A growing body of literature indicates that smartphone technology is a feasible add-on tool in the treatment of individuals with early psychosis (EP) . However, most studies to date have been conducted independent of outpatient care or in a research clinic setting, often with financial incentives to maintain user adherence to the technology. Feasibility of dissemination and implementation of smartphone technology into community mental health centers (CMHCs) has yet to be tested, and whether young adults with EP will use this technology for long periods of time without incentive is unknown. Furthermore, although EP individuals willingly adopt smartphone technology as part of their treatment, it remains unclear whether providers are amenable to integrating smartphone technology into treatment protocols. Objective This study aimed to establish the feasibility of implementing a smartphone app and affiliated Web-based dashboard in 4 community outpatient EP clinics in Northern California. Methods EP individuals in 4 clinics downloaded an app on their smartphone and responded to daily surveys regarding mood and symptoms for up to 5 months. Treatment providers at the affiliated clinics viewed survey responses on a secure Web-based dashboard in sessions with their clients and between appointments. EP clients and treatment providers filled out satisfaction surveys at study end regarding usability of the app. Results Sixty-one EP clients and 20 treatment providers enrolled in the study for up to 5 months. Forty-one EP clients completed the study, and all treatment providers remained in the study for their duration in the clinic. Survey completion for all 61 EP clients was moderate: 40% and 39% for daily and weekly surveys, respectively. Completion rates were slightly higher in the participants who completed the study: 44% and 41% for daily and weekly surveys, respectively. Twenty-seven of 41 (66%) EP clients who completed the study and 11 of 13 (85%) treatment providers who responded to satisfaction surveys reported they would continue to use the app as part of treatment services. Six (15%; 6/41) clients and 3 providers (23%; 3/13) stated that technological glitches impeded their engagement with the platform. Conclusions EP clients and treatment providers in community-based outpatient clinics are responsive to integrating smartphone technology into treatment services. There were logistical and technical challenges associated with enrolling individuals in CMHCs. To be most effective, implementing smartphone technology in CMHC EP care necessitates adequate technical staff and support for utilization of the platform. PMID:29487044

[Treatment of inflammatory complications of colic diverticular disease at the emergency surgical care hospital].

PubMed

Reznitsky, P A; Yartsev, P A; Shavrina, N V

To assess an effectiveness of minimally invasive and laparoscopic technologies in treatment of inflammatory complications of colic diverticular disease. The study included 150 patients who were divided into control and main groups. Survey included ultrasound, X-ray examination and abdominal computerized tomography. In the main group standardized treatment algorithm including minimally invasive and laparoscopic technologies was used. In the main group 79 patients underwent conservative treatment, minimally invasive (ultrasound-assisted percutaneous drainage of abscesses) and laparoscopic surgery that was successful in 78 (98.7%) patients. Standardized algorithm reduces time of treatment, incidence of postoperative complications, mortality and the risk of recurrent inflammatory complications of colic diverticular disease. Also postoperative quality of life was improved.

Fbis report. Science and technology: Economic review, September 19, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-19

;Partial Contents: Germany: Braunschweig University Tests Organic Semiconductors; France: Ariane-5 Tests Suspended; First Tests in Euro-Russian RECORD Rocket Engine Program; France: Renault`s Multi-Model Assembly Line Presented; Germany: New High Speed Trains Under Development; France: Matra Test Drone, Missile Systems; France: Experimental Project for Automobile Recycling; Germany: Survey of Flexible Manufacturing Developments; Germany: Heinrich Hertz Institute Produces Polymer-Based Circuit; French Firms Introduce Computerized Control Room for Nuclear Plants; German Machine Tool Industry Calls for Information Technology Projects; Germany: R&D Achievements in Digital HDTV Reported; Hungary: Secondary Telecommunications Networks Described; EU: Mergers in Pharmaceutical Industry Reported; SGS-Thomson Business Performance Analyzed; Germany`s Siemensmore » Invest Heavily in UK Semiconductor Plant.« less

Lightweight Autonomous Underwater Vehicles (AUVs) performing coastal survey operations in REP 10A

NASA Astrophysics Data System (ADS)

Incze, Michael L.

2011-11-01

Lightweight Autonomous Underwater Vehicles (AUVs) were developed for Naval Special Warfare (NSW) Group 4 search and survey missions from a commercial AUV baseline (Iver 2) through integration of commercial off-the-shelf (COTS) hardware components, and through software development for enhanced on-board Command and Control functions. The development period was 1 year under a project sponsored by the Office of Naval Research TechSolutions Program Office. Hardware integration was completed by the commercial AUV vendor, OceanServer Technology, Inc., and software development was conducted by the Naval Undersea Warfare Center, Naval Oceanographic Office, and U MASS Dartmouth, with support from hardware and software application providers (YSI, Inc., Imagenex Technology Corp., and CARIS). At the conclusion of the integration and development period, an at-sea performance evaluation was scheduled for the Lightweight NSW AUVs with NSWG-4 personnel. The venue for this evaluation was the NATO exercise Recognized Environmental Picture 10A (REP 10A), hosted by Marinha Portuguesa, and coordinated by the Faculdade de Engenharia-Universidade do Porto. REP 10A offered an opportunity to evaluate the performance of the new AUVs and to explore the Concept of Operations (CONOPS) for employing them in military survey operations in shallow coastal waters. Shore- and ship-launched scenarios with launch/recovery by a single operator in a one-to-many coordinated survey, on-scene data product generation and visualization, data push to Reach Back Cells for product integration and enhancement, and survey optimization to streamline survey effort and timelines were included in the CONOPS review. Opportunities to explore employment of hybrid AUV fleets in Combined Force scenarios were also utilized. The Naval Undersea Warfare Center, Marinha Portuguesa, the Faculdade de Engenharia-Universidade do Porto, and OceanServer Technology, Inc., were the primary participants bringing in-water resources to REP 10A. Technical support and products were provided by the Naval Research Laboratory-Stennis Space Center, Naval Oceanographic Office, NATO Undersea Research Centre, University of Massachusetts-Dartmouth, and YSI, Inc. REP 10A proved to be a very effective exercise in meeting each of the critical goals. Results of the performance evaluation guided final development and Independent Verification and Validation (IV&V) for the Lightweight NSW AUV, leading to on-time, successful Factory Acceptance Testing and delivery of the three contracted vehicles to NSWG-4 in September, 2010.

Survey of Constellation-Era LOX/Methane Development Activities and Future Development Needs

NASA Technical Reports Server (NTRS)

Marshall, William M.; Stiegemeier, Benjamin; Greene, Sandra Elam; Hurlbert, Eric A.

2017-01-01

NASA formed the Constellation Program in 2005 to achieve the objectives of maintaining American presence in low-Earth orbit, returning to the moon for purposes of establishing an outpost, and laying the foundation to explore Mars and beyond in the first half of the 21st century. The Exploration Technology Development Program (ETDP) was formulated to address the technology needs to address Constellation architecture decisions. The Propellants and Cryogenic Advanced Development (PCAD) project was tasked with risk mitigation of specific propulsion related technologies to support ETDP. Propulsion systems were identified as critical technologies owing to the high gear-ratio of lunar Mars landers Cryogenic propellants offer performance advantage over storables (NTOMMH) Mass savings translate to greater payload capacity In-situ production of propellant an attractive feature; methane and oxygen identified as possible Martian in-situ propellants New technologies were required to meet more difficult missions High performance LOX/LH2 deep throttle descent engines High performance LOX/LCH4 ascent main and reaction control system (RCS) engines The PCAD project sought to provide those technologies through Reliable ignition pulse RCS Fast start High efficiency engines Stable deep throttling.

Survey of potential receptivity to robotic-assisted exercise coaching in a diverse sample of smokers and nonsmokers

PubMed Central

2018-01-01

A prior project found that an intensive (12 weeks, thrice weekly sessions) in-person, supervised, exercise coaching intervention was effective for smoking cessation among depressed women smokers. However, the sample was 90% White and of high socioeconomic status, and the intensity of the intervention limits its reach. One approach to intervention scalability is to deliver the supervised exercise coaching using a robotic human exercise trainer. This is done in real time via an iPad tablet placed on a mobile robotic wheel base and controlled remotely by an iOS device or computer. As an initial step, this preliminary study surveyed potential receptivity to a robotic-assisted exercise coaching intervention among 100 adults recruited in two community settings, and explored the association of technology acceptance scores with smoking status and other demographics. Participants watched a brief demonstration of the robot-delivered exercise coaching and completed a 19-item survey assessing socio-demographics and technology receptivity measured by the 8-item Technology Acceptance Scale (TAS). Open-ended written feedback was obtained, and content analysis was used to derive themes from these data. Respondents were: 40% female, 56% unemployed, 41% racial minority, 38% current smoker, and 58% depression history. Mean total TAS score was 34.0 (SD = 5.5) of possible 40, indicating overall very good receptivity to the robotic-assisted exercise intervention concept. Racial minorities and unemployed participants reported greater technology acceptance than White (p = 0.015) and employed (p<0.001) respondents. No association was detected between the TAS score and smoking status, depression, gender or age groups. Qualitative feedback indicated the robot was perceived as a novel, motivating, way to increase intervention reach and accessibility, and the wave of the future. Robotic technology has potential applicability for exercise coaching in a broad range of populations, including depressed smokers. Our next step will be to conduct a pilot trial to assess acceptability and potential efficacy of the robotic-assisted exercise coaching intervention for smoking cessation. PMID:29746530

Co-Creating a Culturally Responsive Distance Education Cancer Course with, and for, Alaska's Community Health Workers: Motivations from a Survey of Key Stakeholders.

PubMed

Cueva, Katie; Revels, Laura; Kuhnley, Regina; Cueva, Melany; Lanier, Anne; Dignan, Mark

2017-09-01

To gain input on a proposed culturally responsive, distance-delivered cancer education course informed by empowerment theory and adult-learning principles, Alaska's Community Health Aides/Practitioners (CHA/Ps) and CHA/P leadership were invited to take an online survey in February 2015. The proposed course will be developed as part of the "Distance Education to Engage Alaskan Community Health Aides in Cancer Control" project. The results of the survey demonstrate that respondents are both interested in taking the proposed class and engaging in course development. The results also indicate that respondents have the technological comfort and capacity to be engaged in online learning and have primarily positive experiences and perceptions of distance education. This survey is the beginning of the interactive development of the online cancer education course and part of a continuing endeavor to promote wellness with, and for, Alaska's people by empowering Alaska's CHA/Ps and inspiring positive behavioral change to both prevent cancer and support those who feel its burdens.

Asynchronous Transfer Mode (ATM) Switch Technology and Vendor Survey

NASA Technical Reports Server (NTRS)

Berry, Noemi

1995-01-01

Asynchronous Transfer Mode (ATM) switch and software features are described and compared in order to make switch comparisons meaningful. An ATM switch's performance cannot be measured solely based on its claimed switching capacity; traffic management and congestion control are emerging as the determining factors in an ATM network's ultimate throughput. Non-switch ATM products and experiences with actual installations of ATM networks are described. A compilation of select vendor offerings as of October 1994 is provided in chart form.

ASTRONAUTICS INFORMATION. OPEN LITERATURE SURVEY, VOLUME III, NO. 2 (ENTRIES 30,202-30,404)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1961-02-01

<>15:014925. An annotated list of references on temperature control of satellite and space vehicles is presented. Methods and systems for maintaining vehicles within tolerable temperature bounds while operating outside planetary atmospheres are outlined. Discussions of the temperature environment in space and how it might affect vehicle operation are given. Re-entry heating problems are not included. Among the sources used were: Engineering Index, Applied Science and Technology Index, Astronautics Abstracts, PAL uniterm index, ASTIA, and LMSD card catalog. (auth)

User definition and mission requirements for unmanned airborne platforms, revised

NASA Technical Reports Server (NTRS)

Kuhner, M. B.; Mcdowell, J. R.

1979-01-01

The airborne measurement requirements of the scientific and applications experiment user community were assessed with respect to the suitability of proposed strawman airborne platforms. These platforms provide a spectrum of measurement capabilities supporting associated mission tradeoffs such as payload weight, operating altitude, range, duration, flight profile control, deployment flexibility, quick response, and recoverability. The results of the survey are used to examine whether the development of platforms is warranted and to determine platform system requirements as well as research and technology needs.

List of U.S. Army Research Institute Research and Technical Publications: October 1, 1989, to September 30, 1994. With Author and Subject Index

DTIC Science & Technology

1995-02-01

Control conditions. The implications of these results to military situations were dis- cussed. A pilot field experiment with marching soldiers tested...data for the seven MOS comprising the 96 Career Management Field (CMF). RN 91-42 Requirements-Based Restruc- turing of Army Military Occu- pational...Institute for the Behavioral and Social Sciences (ARI) Fort Gordon Field Unit surveyed and assessed training technology both within and outside of

The arms race and nuclear war

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barash, D.P.

Addressing the history, physics, biology, economics, politics, psychology, and ethics of nuclear armaments, the author provides a survey of diverse facets of the nuclear controversy. The study encompasses such key areas as nuclear hardware and technology; the short- and long-term effects of nuclear weapons; strategic doctrine, deterrence and defense policy; the arms race, arms control, and nuclear proliferation; and the economic impact, psychology, and ethics of nuclear armaments. A ''Policy Issues'' section, presenting both the advocate and opponent sides of the debate, is included with each chapter.

Navy-wide Personnel Survey (NPS) 2003: Summary of Survey Results

DTIC Science & Technology

2005-05-01

NPS) 2003: Summary of Survey Results Navy Personnel Research, Studies, and Technology Department Bureau of Naval Personnel (NPRST/PERS-1) Millington...Studies, and Technology Navy Personnel Command 5720 Integrity Drive Millington, TN 38055-1400 www.nprst.navy.mil 5(3257𔃼&80(17$7,213$*( )RUP...Employment 11 13 The Length Of The New Duty Assignment 2 5 I Am Unaccompanied Because My New Work Schedule Does Not Allow Time For Family 5 4 I Am

Critical research and advanced technology (CRT) support project

NASA Technical Reports Server (NTRS)

Furman, E. R.; Anderson, D. N.; Hodge, P. E.; Lowell, C. E.; Nainiger, J. J.; Schultz, D. F.

1983-01-01

A critical technology base for utility and industrial gas turbines by planning the use of coal-derived fuels was studied. Development tasks were included in the following areas: (1) Combustion - investigate the combustion of coal-derived fuels and methods to minimize the conversion of fuel-bound nitrogen to NOx; (2) materials - understand and minimize hot corrosion; (3) system studies - integrate and focus the technological efforts. A literature survey of coal-derived fuels was completed and a NOx emissions model was developed. Flametube tests of a two-stage (rich-lean) combustor defined optimum equivalence ratios for minimizing NOx emissions. Sector combustor tests demonstrated variable air control to optimize equivalence ratios over a wide load range and steam cooling of the primary zone liner. The catalytic combustion of coal-derived fuels was demonstrated. The combustion of coal-derived gases is very promising. A hot-corrosion life prediction model was formulated and verified with laboratory testing of doped fuels. Fuel additives to control sulfur corrosion were studied. The intermittent application of barium proved effective. Advanced thermal barrier coatings were developed and tested. Coating failure modes were identified and new material formulations and fabrication parameters were specified. System studies in support of the thermal barrier coating development were accomplished.

Use of remote sensing to identify spatial risk factors for malaria in a region of declining transmission: a cross-sectional and longitudinal community survey.

PubMed

Moss, William J; Hamapumbu, Harry; Kobayashi, Tamaki; Shields, Timothy; Kamanga, Aniset; Clennon, Julie; Mharakurwa, Sungano; Thuma, Philip E; Glass, Gregory

2011-06-10

The burden of malaria has decreased dramatically within the past several years in parts of sub-Saharan Africa. Further malaria control will require targeted control strategies based on evidence of risk. The objective of this study was to identify environmental risk factors for malaria transmission using remote sensing technologies to guide malaria control interventions in a region of declining burden of malaria. Satellite images were used to construct a sampling frame for the random selection of households enrolled in prospective longitudinal and cross-sectional surveys of malaria parasitaemia in Southern Province, Zambia. A digital elevation model (DEM) was derived from the Shuttle Radar Topography Mission version 3 DEM and used for landscape characterization, including landforms, elevation, aspect, slope, topographic wetness, topographic position index and hydrological models of stream networks. A total of 768 individuals from 128 randomly selected households were enrolled over 21 months, from the end of the rainy season in April 2007 through December 2008. Of the 768 individuals tested, 117 (15.2%) were positive by malaria rapid diagnostic test (RDT). Individuals residing within 3.75 km of a third order stream were at increased risk of malaria. Households at elevations above the baseline elevation for the region were at decreasing risk of having RDT-positive residents. Households where new infections occurred were overlaid on a risk map of RDT positive households and incident infections were more likely to be located in high-risk areas derived from prevalence data. Based on the spatial risk map, targeting households in the top 80th percentile of malaria risk would require malaria control interventions directed to only 24% of the households. Remote sensing technologies can be used to target malaria control interventions in a region of declining malaria transmission in southern Zambia, enabling a more efficient use of resources for malaria elimination.

Engaging with change: Information and communication technology professionals’ perspectives on change in the context of the ‘Brexit’ vote

PubMed Central

2017-01-01

Background Information and Communication Technology (ICT) has been a key agent of change in the 21st century. Given the role of ICT in changing society this research sought to explore the responses and attitudes to change from ICT professionals and ICT academics in dealing with the potentially far reaching political challenge triggered by the UK’s 2016 European Union Referendum and its decision to leave the European Union (referred to as Brexit). Whilst the vote was a UK based decision its ramifications have global implications and as such the research was not confined to the UK. Methods and findings Data was collected through a survey launched on the first working day after the Brexit referendum vote to leave the EU and kept open for four weeks. The survey contained qualitative and quantitative questions. It sought to understand the opportunities and threats that would exist post-Brexit for ICT professionals and academics triggered by the decision. The research captured a complex rich picture on ICT professionals’ responses to the potential challenge of change triggered by the Brexit vote. Immediately after the Brexit decision the research reveals uncertainties amongst ICT professionals regarding what the decision would mean, with just under half of the participants not identifying any opportunities or threats. For those who did, threats outweighed opportunities by just more than double. Whilst understanding the global possibilities and dangers, participants saw their position from national and organizational perspectives. The highest frequency coded threats related to areas outside the participants’ control and the highest frequency opportunities related to areas where there was the potential for ICT interventions. This survey is part of longitudinal piece of research. Using the same methodological approach two further surveys are planned. The second survey will be one year after Article 50 was triggered on 29 March 2017. The final survey will be one year after the UK exit from the EU, assuming this occurs. PMID:29117185

Engaging with change: Information and communication technology professionals' perspectives on change in the context of the 'Brexit' vote.

PubMed

Lomas, Elizabeth; McLeod, Julie

2017-01-01

Information and Communication Technology (ICT) has been a key agent of change in the 21st century. Given the role of ICT in changing society this research sought to explore the responses and attitudes to change from ICT professionals and ICT academics in dealing with the potentially far reaching political challenge triggered by the UK's 2016 European Union Referendum and its decision to leave the European Union (referred to as Brexit). Whilst the vote was a UK based decision its ramifications have global implications and as such the research was not confined to the UK. Data was collected through a survey launched on the first working day after the Brexit referendum vote to leave the EU and kept open for four weeks. The survey contained qualitative and quantitative questions. It sought to understand the opportunities and threats that would exist post-Brexit for ICT professionals and academics triggered by the decision. The research captured a complex rich picture on ICT professionals' responses to the potential challenge of change triggered by the Brexit vote. Immediately after the Brexit decision the research reveals uncertainties amongst ICT professionals regarding what the decision would mean, with just under half of the participants not identifying any opportunities or threats. For those who did, threats outweighed opportunities by just more than double. Whilst understanding the global possibilities and dangers, participants saw their position from national and organizational perspectives. The highest frequency coded threats related to areas outside the participants' control and the highest frequency opportunities related to areas where there was the potential for ICT interventions. This survey is part of longitudinal piece of research. Using the same methodological approach two further surveys are planned. The second survey will be one year after Article 50 was triggered on 29 March 2017. The final survey will be one year after the UK exit from the EU, assuming this occurs.

A Self-Report Computer-Based Survey of Technology Use by People with Intellectual and Developmental Disabilities

PubMed Central

Tanis, Emily Shea; Palmer, Susan B.; Wehmeyer, Michael L.; Davies, Danial; Stock, Steven; Lobb, Kathy; Bishop, Barbara

2014-01-01

Advancements of technologies in the areas of mobiliy, hearing and vision, communication, and daily living for people with intellectual and developmental disabilities (IDD) has the potential to greatly enhance indepencence and self-determination. Previous research, however, suggests that there is a “technological divide” with regard to the use of such technologies by people with IDD when compared with the general public. The present study sought to provide current information with regard to technology use by people with IDD by examining the technology needs, use, and barriers to such use experienced by 180 adults with IDD through QuestNet, a self-directed computer survey program. The study findings suggest that although there has been progress in technology acquisition and use by people IDD, yet there remains an underutilization of technologies across the population. PMID:22316226

Best practices of MDOT's survey operation, organization and technology implementation.

DOT National Transportation Integrated Search

2012-05-01

A critical activity performed by employees of the Mississippi Department of Transportation is surveying. : Surveying in some instances needs to be performed in hazardous environments such as rugged terrain and : high-speed traffic. New surveying tech...

Technology Usage of Tennessee Agriculture Teachers

ERIC Educational Resources Information Center

Coley, Michael D.; Warner, Wendy J.; Stair, Kristin S.; Flowers, James L.; Croom, D. Barry

2015-01-01

This study examined the accessibility and use of instructional technologies by agriculture teachers in Tennessee. Data were collected using a survey instrument to investigate teachers' adoption of technology, sources of acquired technology skills, accessibility and use of technological equipment, and barriers to technology integration. The study…

The snake geothermal drilling project. Innovative approaches to geothermal exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shervais, John W.; Evans, James P.; Liberty, Lee M.

2014-02-21

The goal of our project was to test innovative technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correlate lithologies observed in core with surface based geophysical studies. Compiled data included geologic maps, volcanic vent distribution, structural maps, existing well logs and temperature gradient logs, groundwater temperatures, and geophysical surveys (resistivity, magnetics, gravity). New data included high-resolution gravity and magnetic surveys, high-resolution seismic surveys, three slimhole test wells, borehole wireline logs, lithology logs, water chemistry, alteration mineralogy, fracture distribution,more » and new thermal gradient measurements.« less

United States planetary rover status: 1989

NASA Technical Reports Server (NTRS)

Pivirotto, Donna L. S.; Dias, William C.

1990-01-01

A spectrum of concepts for planetary rovers and rover missions, is covered. Rovers studied range from tiny micro rovers to large and highly automated vehicles capable of traveling hundreds of kilometers and performing complex tasks. Rover concepts are addressed both for the Moon and Mars, including a Lunar/Mars common rover capable of supporting either program with relatively small modifications. Mission requirements considered include both Science and Human Exploration. Studies include a range of autonomy in rovers, from interactive teleoperated systems to those requiring and onboard System Executive making very high level decisions. Both high and low technology rover options are addressed. Subsystems are described for a representative selection of these rovers, including: Mobility, Sample Acquisition, Science, Vehicle Control, Thermal Control, Local Navigation, Computation and Communications. System descriptions of rover concepts include diagrams, technology levels, system characteristics, and performance measurement in terms of distance covered, samples collected, and area surveyed for specific representative missions. Rover development schedules and costs are addressed for Lunar and Mars exploration initiatives.

Survey of key technologies on millimeter-wave CMOS integrated circuits

NASA Astrophysics Data System (ADS)

Yu, Fei; Gao, Lei; Li, Lixiang; Cai, Shuo; Wang, Wei; Wang, Chunhua

2018-05-01

In order to provide guidance for the development of high performance millimeter-wave complementary metal oxide semiconductor (MMW-CMOS) integrated circuits (IC), this paper provides a survey of key technologies on MMW-CMOS IC. Technical background of MMW wireless communications is described. Then the recent development of the critical technologies of the MMW-CMOS IC are introduced in detail and compared. A summarization is given, and the development prospects on MMW-CMOS IC are also discussed.

A Survey Of Architectural Approaches for Managing Embedded DRAM and Non-volatile On-chip Caches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Sparsh; Vetter, Jeffrey S; Li, Dong

Recent trends of CMOS scaling and increasing number of on-chip cores have led to a large increase in the size of on-chip caches. Since SRAM has low density and consumes large amount of leakage power, its use in designing on-chip caches has become more challenging. To address this issue, researchers are exploring the use of several emerging memory technologies, such as embedded DRAM, spin transfer torque RAM, resistive RAM, phase change RAM and domain wall memory. In this paper, we survey the architectural approaches proposed for designing memory systems and, specifically, caches with these emerging memory technologies. To highlight theirmore » similarities and differences, we present a classification of these technologies and architectural approaches based on their key characteristics. We also briefly summarize the challenges in using these technologies for architecting caches. We believe that this survey will help the readers gain insights into the emerging memory device technologies, and their potential use in designing future computing systems.« less

US Geological Survey National Computer Technology Meeting; Proceedings, Phoenix, Arizona, November 14-18, 1988

USGS Publications Warehouse

Balthrop, Barbara H.; Terry, J.E.

1991-01-01

The U.S. Geological Survey National Computer Technology Meetings (NCTM) are sponsored by the Water Resources Division and provide a forum for the presentation of technical papers and the sharing of ideas or experiences related to computer technology. This report serves as a proceedings of the meeting held in November, 1988 at the Crescent Hotel in Phoenix, Arizona. The meeting was attended by more than 200 technical and managerial people representing all Divisions of the U.S. Geological Survey.Scientists in every Division of the U.S. Geological Survey rely heavily upon state-of-the-art computer technology (both hardware and sofnuare). Today the goals of each Division are pursued in an environment where high speed computers, distributed communications, distributed data bases, high technology input/output devices, and very sophisticated simulation tools are used regularly. Therefore, information transfer and the sharing of advances in technology are very important issues that must be addressed regularly.This report contains complete papers and abstracts of papers that were presented at the 1988 NCTM. The report is divided into topical sections that reflect common areas of interest and application. In each section, papers are presented first followed by abstracts. For these proceedings, the publication of a complete paper or only an abstract was at the discretion of the author, although complete papers were encouraged.Some papers presented at the 1988 NCTM are not published in these proceedings.

A Direct Imaging Survey of Spitzer-detected Debris Disks: Occurrence of Giant Planets in Dusty Systems

NASA Astrophysics Data System (ADS)

Meshkat, Tiffany; Mawet, Dimitri; Bryan, Marta L.; Hinkley, Sasha; Bowler, Brendan P.; Stapelfeldt, Karl R.; Batygin, Konstantin; Padgett, Deborah; Morales, Farisa Y.; Serabyn, Eugene; Christiaens, Valentin; Brandt, Timothy D.; Wahhaj, Zahed

2017-12-01

We describe a joint high-contrast imaging survey for planets at the Keck and Very Large Telescope of the last large sample of debris disks identified by the Spitzer Space Telescope. No new substellar companions were discovered in our survey of 30 Spitzer-selected targets. We combine our observations with data from four published surveys to place constraints on the frequency of planets around 130 debris disk single stars, the largest sample to date. For a control sample, we assembled contrast curves from several published surveys targeting 277 stars that do not show infrared excesses. We assumed a double power-law distribution in mass and semimajor axis (SMA) of the form f(m,a)={{Cm}}α {a}β , where we adopted power-law values and logarithmically flat values for the mass and SMA of planets. We find that the frequency of giant planets with masses 5-20 M Jup and separations 10-1000 au around stars with debris disks is 6.27% (68% confidence interval 3.68%-9.76%), compared to 0.73% (68% confidence interval 0.20%-1.80%) for the control sample of stars without disks. These distributions differ at the 88% confidence level, tentatively suggesting distinctness of these samples. Some of the data presented herein were obtained at the W.M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California and the National Aeronautics and Space Administration. The Observatory was made possible by the generous financial support of the W.M. Keck Foundation.

Blended Learning, E-Learning and Mobile Learning in Mathematics Education

ERIC Educational Resources Information Center

Borba, Marcelo C.; Askar, Petek; Engelbrecht, Johann; Gadanidis, George; Llinares, Salvador; Aguilar, Mario Sánchez

2016-01-01

In this literature survey we focus on identifying recent advances in research on digital technology in the field of mathematics education. To conduct the survey we have used internet search engines with keywords related to mathematics education and digital technology and have reviewed some of the main international journals, including the ones in…

Family Members' Reports of the Technology Use of Family Members with Intellectual and Developmental Disabilities

ERIC Educational Resources Information Center

Palmer, S. B.; Wehmeyer, M. L.; Davies, D. K.; Stock, S. E.

2012-01-01

Background: A nationwide survey of family members of people with intellectual and developmental disabilities ranging in age from birth through adulthood was conducted to replicate a similar effort by Wehmeyer and update the knowledge base concerning technology use by people with intellectual and developmental disabilities. Method: Survey responses…

2012 Military Family Life Project (MFLP): Tabulations of Responses

DTIC Science & Technology

2013-10-31

problems ................................................................................. 254 j. Loneliness ...Survey Comparability On occasion, the paper and Web versions of the survey differ. These differences result from the technological advantages and...are unnecessary in the Web version due to “smart skip” technology . For example, in Q42 of the paper version, respondents are asked whether they feel

Building a Case for Conducting Technology Surveys On-Line.

ERIC Educational Resources Information Center

Denton, Jon J.; Strader, Arlen

A Technology in Texas Public Schools 1998 Survey instrument was integrated into a Web-based response system enabling the instrument to be accessed, completed, submitted, and instantaneously analyzed over the Internet. A mark-sense or optical scan paper version of the instrument was also developed for mail-out distribution to each school district…

Technical Education in 2-Year Colleges. HES Survey Number 17.

ERIC Educational Resources Information Center

Burton, Lawrence; Celebuski, Carin A.

Based on a January 1993 survey of 347 two-year colleges nationwide, this report describes aspects of engineering technology and science technology education and training in the nation's two-year colleges. Following introductory materials, the first chapter estimates the number of colleges offering engineering and science programs, reviews types of…

Using Technology in Undergraduate Admission: Current Practices and Future Plans

ERIC Educational Resources Information Center

Lindbeck, Robin; Fodrey, Brian

2009-01-01

The purpose of this study was to identify the current practices and future plans for using technology in admission practices at four-year colleges and universities. This study collected data through an online survey. The survey was largely quantitative but also included several qualitative questions, and focused on 12 broad categories of…

Integrating Computer Technology in Early Childhood Education Environments: Issues Raised by Early Childhood Educators

ERIC Educational Resources Information Center

Wood, Eileen; Specht, Jacqueline; Willoughby, Teena; Mueller, Julie

2008-01-01

The purpose of this study was to assess the educators' perspectives on the introduction of computer technology in the early childhood education environment. Fifty early childhood educators completed a survey and participated in focus groups. Parallels existed between the individually completed survey data and the focus group discussions. The…

Graduate Students' Interests in Technology Training: Results of a Survey.

ERIC Educational Resources Information Center

Fahy, Patrick J.

A two-part survey of 69 students (35 percent response) enrolled in the Master's of Distance Education (MDE) program at Athabasca University in December 1996 addressed three questions: (1) what specific technologies were of most interest to MDE students; (2) whether students accustomed to studying completely at a distance would accept a proposed…

SLJ's Tech Survey Part Two

ERIC Educational Resources Information Center

Brewer, Sally; Milam, Peggy

2005-01-01

Library media specialists are gung ho on technology, but they often lack the cash to take advantage of it, according to "SLJ"'s first-ever tech survey. Earlier this year, they reported on the various ways that school librarians use technology--from creating Web sites to policy-making to training students and colleagues. This time, they…

The Relationship among Principals' Technology Leadership, Teaching Innovation, and Students' Academic Optimism in Elementary Schools

ERIC Educational Resources Information Center

Hsieh, Chuan-Chung; Yen, Hung-Chin; Kuan, Liu-Yen

2014-01-01

This study empirically investigates the relationships among principals' technology leadership, teaching innovations, and students' academic optimism by surveying elementary school educators across Taiwan. Of the total 1,080 questionnaires distributed, 755 valid surveys were returned for a 69.90% return rate. Teachers were asked to indicate the…

Identifying University Professors' Information Needs in the Challenging Environment of Information and Communication Technologies

ERIC Educational Resources Information Center

Jankowska, Maria Anna

2004-01-01

A Web-based survey was conducted to determine usage of information and communication technologies by faculty for research and teaching. Respondents expressed their preferences regarding library electronic materials and services. Survey results highlighted solutions to help faculty in this era of information overload and rapid development of…

How Technology Teachers Understand Technological Knowledge

ERIC Educational Resources Information Center

Norström, Per

2014-01-01

Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

Building technology services that address student needs.

PubMed

Le Ber, Jeanne M; Lombardo, Nancy T; Wimmer, Erin

2015-01-01

A 16-question technology use survey was conducted to assess incoming health sciences students' knowledge of and interest in current technologies, and to identify student device and tool preferences. Survey questions were developed by colleagues at a peer institution and then edited to match this library's student population. Two years of student responses have been compiled, compared, and reviewed as a means for informing library decisions related to technology and resource purchases. Instruction and event programming have been revised to meet student preferences. Based on the number of students using Apple products, librarians are addressing the need to become more proficient with this platform.

Mobile Application for Pregnant Women: What Do Mothers Say?

PubMed

Sommer, Janine; Daus, Mariana; Smith, María; Luna, Daniel

2017-01-01

Today, health information technologies are constantly expanding and changing, allowing more and more people to use different mobile applications to receive information and control their health condition. Based on the need to implement an application for pregnant women in the Personal Health Record (PHR) of Hospital Italiano de Buenos Aires (HIBA), an Australian survey was carried out to measure the use and utility of a pregnancy application (pregnancy app). Our results were broadly in agreement with the reference values. The survey was distributed through social networks (Facebook and Twitter) during September 2016. We obtained 235 responses from Spanish-speaking women, mostly Argentinian. In conclusion, it could be observed that a pregnancy app offers the possibility of a greater follow-up and provides reassurance to the pregnant women who use it.

Cooperative Vehicular Networking: A Survey

PubMed Central

Ahmed, Ejaz

2018-01-01

With the remarkable progress of cooperative communication technology in recent years, its transformation to vehicular networking is gaining momentum. Such a transformation has brought a new research challenge in facing the realization of cooperative vehicular networking (CVN). This paper presents a comprehensive survey of recent advances in the field of CVN. We cover important aspects of CVN research, including physical, medium access control, and routing protocols, as well as link scheduling and security. We also classify these research efforts in a taxonomy of cooperative vehicular networks. A set of key requirements for realizing the vision of cooperative vehicular networks is then identified and discussed. We also discuss open research challenges in enabling CVN. Lastly, the paper concludes by highlighting key points of research and future directions in the domain of CVN. PMID:29881331

Laying the foundation for a digital Nova Scotia

NASA Astrophysics Data System (ADS)

Bond, J.

2016-04-01

In 2013, the Province of Nova Scotia began an effort to modernize its coordinate referencing infrastructure known as the Nova Scotia Coordinate Referencing System (NSCRS). At that time, 8, active GPS stations were installed in southwest Nova Scotia to evaluate the technology's ability to address the Province's coordinate referencing needs. The success of the test phase helped build a business case to implement the technology across the entire Province. It is anticipated that by the end of 2015, 40 active GPS stations will be in place across Nova Scotia. This infrastructure, known as the Nova Scotia Active Control Stations (NSACS) network, will allow for instantaneous, centimetre level positioning across the Province. Originally designed to address the needs of the surveying community, the technology has also proven to have applications in mapping, machine automation, agriculture, navigation, emergency response, earthquake detection and other areas. In the foreseeable future, all spatial data sets captured in Nova Scotia will be either directly or indirectly derived from the NSACS network. The technology will promote high accuracy and homogenous spatial data sets across the Province. The technology behind the NSACS and the development of the system are described. Examples of how the technology is contributing to a digital Nova Scotia are presented. Future applications of the technology are also considered.

The Application of Typology Method in Historical Building Information Modelling (hbim) Taking the Information Surveying and Mapping of Jiayuguan Fortress Town as AN Example

NASA Astrophysics Data System (ADS)

Li, D. Y.; Li, K.; Wu, C.

2017-08-01

With the promotion of fine degree of the heritage building surveying and mapping, building information modelling technology(BIM) begins to be used in surveying and mapping, renovation, recording and research of heritage building, called historical building information modelling(HBIM). The hierarchical frameworks of parametric component library of BIM, belonging to the same type with the same parameters, has the same internal logic with archaeological typology which is more and more popular in the age identification of ancient buildings. Compared with the common materials, 2D drawings and photos, typology with HBIM has two advantages — (1) comprehensive building information both in collection and representation and (2) uniform and reasonable classification criteria This paper will take the information surveying and mapping of Jiayuguan Fortress Town as an example to introduce the field work method of information surveying and mapping based on HBIM technology and the construction of Revit family library.And then in order to prove the feasibility and advantage of HBIM technology used in typology method, this paper will identify the age of Guanghua gate tower, Rouyuan gate tower, Wenchang pavilion and the theater building of Jiayuguan Fortress Town with HBIM technology and typology method.

Case factors affecting hearing aid recommendations by hearing care professionals.

PubMed

Gioia, Carmine; Ben-Akiva, Moshe; Kirkegaard, Matilde; Jørgensen, Ole; Jensen, Kasper; Schum, Don

2015-03-01

Professional recommendations to patients concerning hearing instrument (HI) technology levels are not currently evidence-based. Pre-fitting parameters have not been proven to be the primary indicators for optimal patient outcome with different HI technology levels. This results in subjective decision-making as regards the technology level recommendation made by professionals. The objective of this study is to gain insight into the decision-making criteria utilized by professionals when recommending HI technology levels to hearing-impaired patients. A set of patient variables (and their respective levels) was identified by professionals as determinant for their recommendation of HIs. An experimental design was developed and 21 representative patient cases were generated. The design was based on a contrastive vignette technique according to which different types of vignettes (patient cases) were randomly presented to respondents in an online survey. Based on these patient cases, professionals were asked in the survey to make a treatment recommendation. The online survey was sent to approximately 3,500 professionals from the US, Germany, France, and Italy. The professionals were randomly selected from the databases of Oticon sales companies. The manufacturer sponsoring the survey remained anonymous and was only revealed after completing the survey, if requested by the respondent. The response rate was 20.5%. Data comprised of respondent descriptions and patient case recommendations that were collected from the online survey. A binary logit modeling approach was used to identify the variables that discriminate between the respondents' recommendations of HI technology levels. The results show that HI technology levels are recommended by professionals based on their perception of the patient's activity level in life, the level of HI usage for experienced users, their age, and their speech discrimination score. Surprisingly, the patient's lifestyle as perceived by the hearing care professional, followed by speech discrimination, were the strongest factors in explaining treatment recommendation. An active patient with poor speech discrimination had a 17% chance of being recommended the highest technology level HI. For a very active patient with good speech discrimination, the probability increases to 68%. The discrepancies in HI technology level recommendations are not justified by academic research or evidence of optimal patient outcome with a different HI technology level. The paradigm of lifestyle as the significant variable identified in this study is apparently deeply anchored in the mindset of the professional despite the lack of supporting evidence. These results call for a shift in the professional's technology level recommendation practice, from nonevidence-based to a proven practice that can maximize patient outcome. American Academy of Audiology.

Information system technologies' role in augmenting dermatologists' knowledge of prescription medication costs.

PubMed

DeMarco, Sebastian S; Paul, Ravi; Kilpatrick, Russell J

2015-12-01

Despite the recent rising costs of once affordable dermatologic prescription medications, a survey measuring dermatologists' attitudes, beliefs, and knowledge of the cost of drugs they commonly prescribe has not been conducted. Awareness of drug costs is hindered by a lack of access to data about the prices of medicines. No surveys of physicians have addressed this issue by proposing new information system technologies that augment prescription medication price transparency and measuring how receptive physicians are to using these novel solutions in their daily clinical practice. Our research aims to investigate these topics with a survey of physicians in dermatology. Members of the North Carolina Dermatology Association were contacted through their electronic mailing list and asked to take an online survey. The survey asked several questions about dermatologists' attitudes and beliefs about drug costs. To measure their knowledge of prescription medications, the National Average Drug Acquisition Cost was used as an authoritative price that was compared to the survey takers' price estimates of drugs commonly used in dermatology. Physicians' willingness to use four distinct information system technologies that increase drug price transparency was also assessed. Dermatologists believe drug costs are an important factor in patient care and believe access to price information would allow them to provide a higher quality of care. Dermatologists' knowledge of the costs of medicines they commonly prescribe is poor, but they want to utilize information system technologies that increase access to drug pricing information. There is an unmet demand for information system technologies which increase price transparency of medications in dermatology. Physicians and IT professionals have the opportunity to create novel information systems that can be utilized to help guide cost conscious clinical decision making. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Attitudes on and usage of balloon catheter technology in rhinology: A survey of the American Rhinologic Society.

PubMed

Halderman, Ashleigh A; Stokken, Janalee; Momin, Suhael R; Smith, Timothy L; Sindwani, Raj

2015-01-01

Use of balloon catheter dilation in the management of paranasal sinus diseases, including chronic rhinosinusitis (CRS) and recurrent acute rhinosinusitis, remains controversial. In an effort to gain some clarity about its evolving role, we surveyed members of the American Rhinologic Society (ARS). Online survey. ARS Members were sent an invitation by e-mail to participate in an online, anonymous 23-item survey. A total of 231 participants completed the survey, for an overall response rate of 25%. Balloon catheter technology (BCT) played no role in the practices of one-third of all the respondents. Of those who did use BCT, more than 50% performed only 1-4 cases per month on average. This did not differ significantly with practice type (p = 0.2988). The overall use of BCT differed between types of practices with those in private practice reporting greater use of the technology for maxillary and sphenoid sinuses (p = 0.0003 and p = 0.0073, respectively). Participants in private practice appeared significantly more impressed with the results of BCT when compared with those in academia (p = 0.0005) and also thought that patients were more satisfied (p = 0.0002). Opinions toward the strength of available evidence also differed significantly between the two groups (p = 0.0007). Thirty-two respondents had experienced a complication with BCT, although the majority of these did not require any intervention. ARS members surveyed used BCT infrequently in their practices. Attitudes on the role of this technology in CRS management differed between academic and private practitioners, but, despite this, the volume of reported BCT use was the same. Surgeons are more accepting of the technology now compared with 5 years ago, and many of them believe that their use of BCT will increase in the future.

A comparative analysis of mail and internet surveys

Treesearch

Benjamin D. Poole; David K. Loomis

2010-01-01

Th e field of survey research is constantly evolving with the introduction of new technologies. Each new mini-revolution brings criticism about the accuracy of the new survey method. The latest development in the survey research field has been increased reliance on Internet surveys. This paper compares data collected through a mixed-mode (mail and Internet) survey of...

Digital Denture Fabrication in Pre- and Postdoctoral Education: A Survey of U.S. Dental Schools.

PubMed

Fernandez, Monica A; Nimmo, Arthur; Behar-Horenstein, Linda S

2016-01-01

To survey chairs of prosthodontics or restorative departments and program directors of postdoctoral prosthodontic programs in the United States regarding digital denture fabrication. The key objectives of the survey were to identify the current trends in complete denture fabrication using CAD/CAM technology and to determine how and to what extent this technique is taught and used in U.S. pre- and postdoctoral prosthodontic programs. An invitation to participate in an online survey was sent to 52 prosthodontics/restorative chairs of U.S. dental schools and to all of the 50 program directors of postdoctoral prosthodontics programs. A version of the survey with the same questions was sent to a national sample of prosthodontics/restorative chairs and program directors of postdoctoral prosthodontics. The 20-item survey took approximately 15 minutes to complete. Dependent samples paired t-test was run on items that were the same in both surveys. The response rate for the survey was 63% for department chairs and 44% for program directors. All respondents with the exception of one department chair were aware of CAD/CAM technology used for denture fabrication. More than half of the program directors (52.4%) compared to 12.1% of chairs have incorporated some aspects of CAD/CAM denture fabrication technology into their curriculum. When asked if the fabrication cost prevented introducing this technology in the predoctoral/postdoctoral curriculum, 52.4% of the department chairs affirmed this response compared to 12.1% of the program directors. There was a significant difference between groups when asked if they had incorporated the CAD/CAM denture fabrication technique into the postgraduate/predoctoral curriculum. Department chairs reported less usage of CAD/CAM technology. Only 12.1% of department chairs reported using some aspects of CAD/CAM technology in the predoctoral curriculum compared to 52.4% in the postdoctoral curriculum (F = 13.528, p ≤ 0.001). While this technology is used in four predoctoral clinics, none of the chairs reported including CAD/CAM denture fabrication in their preclinical complete denture courses. For the schools using the technology, 33.3% of postdoctoral and 30.3% of predoctoral programs use it to make a denture with a try-in step; however, 19% of the postdoctoral and 18.2% of predoctoral programs process the dentures without a try-in appointment. Slightly less than half (42.9%) of graduate programs are using the technology to make just the denture bases. Only a small proportion (10% or less) of the total number of dentures processed in post- and predoctoral programs are made using CAD/CAM technology. The proportion of postdoctoral programs that process cases using CAD/CAM technology was significantly higher than in predoctoral programs (F = 5.106, p ≤ 0.028). Many schools indicated that they are in a "trial phase" to evaluate the technique, especially at the predoctoral level. Also, 19% (n = 4) of postdoctoral and 15.2% (n = 5) of predoctoral respondents have created continuing education courses. Of postdoctoral programs, 38.1% (n = 8) plan to introduce this technology at some point in the near future (next 1 to 4 years); 27.3% of predoctoral programs plan to as well. All program directors and department chairs who participated in the survey are aware of this technology with the exception of one department chair. More than half of the program directors reported that they have incorporated this technology in their curricula compared to only 12% of department chairs. Currently, only 10% or less of complete denture cases are processed using the CAD/CAM technology, at either the post- or predoctoral levels. Both groups reported that the main use of this technology is for the fabrication of denture bases and for processing dentures including the try-in step. The majority of respondents in both groups indicated they plan to add digital denture fabrication into their curricula within the next 1 to 4 years. © 2015 by the American College of Prosthodontists.

Perceptions and Practice: The Relationship between Teacher Perceptions of Technology Use and Level of Classroom Technology Integration

ERIC Educational Resources Information Center

Sawyer, Laura M.

2017-01-01

This correlational-predictive study investigated the relationship between teacher perceptions of technology use and observed classroom technology integration level using the "Technology Uses and Perceptions Survey" (TUPS) and the "Technology Integration Matrix-Observation" (TIM-O) instruments, developed by the Florida Center…

Changing Technology and Work: Northern Telecom. CAW Technology Project.

ERIC Educational Resources Information Center

Robertson, David; Wareham, Jeff

A project to examine the implications of technological change at Northern Telecom consisted of two major components: a technological survey and case study research. A questionnaire that contained more than 90 questions on technological change was distributed through local union technology committee meetings in Brampton, London, Belleville, and…

Field methods and quality-assurance plan for water-quality activities and water-level measurements, U.S. Geological Survey, Idaho National Laboratory, Idaho

USGS Publications Warehouse

Bartholomay, Roy C.; Maimer, Neil V.; Wehnke, Amy J.

2014-01-01

Water-quality activities and water-level measurements by the personnel of the U.S. Geological Survey (USGS) Idaho National Laboratory (INL) Project Office coincide with the USGS mission of appraising the quantity and quality of the Nation’s water resources. The activities are carried out in cooperation with the U.S. Department of Energy (DOE) Idaho Operations Office. Results of the water-quality and hydraulic head investigations are presented in various USGS publications or in refereed scientific journals and the data are stored in the National Water Information System (NWIS) database. The results of the studies are used by researchers, regulatory and managerial agencies, and interested civic groups. In the broadest sense, quality assurance refers to doing the job right the first time. It includes the functions of planning for products, review and acceptance of the products, and an audit designed to evaluate the system that produces the products. Quality control and quality assurance differ in that quality control ensures that things are done correctly given the “state-of-the-art” technology, and quality assurance ensures that quality control is maintained within specified limits.

Rural energy survey and cost-effectiveness analysis of renewable-energy technologies for a Philippine Island community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manibog, F.R.

1982-01-01

This study presents the methodology and results of: (1) a rural energy survey that was conducted in a Philippine island community; and (2) a cost-effectiveness analysis of selected conventional and renewable-energy technologies. The rural energy survey section compares different survey techniques and analyzes energy utilization by providing: (1) a breakdown of energy flows and use patterns; (2) information on energy prices, ownership patterns, social relations, and their effects in terms of differential access to energy sources; (3) per household and per capita consumption figures; and (4) a village energy-consumption table. Correlation analysis is used to determine if the stratified, independentmore » socio-economic variables are indicators for dependent energy variables. Results of the economic analysis indicate that renewable-energy technologies are already least-cost alternatives to diesel generation in the village case study. The sensitivity analysis also shows that these technologies remain the least-cost options even if their capital costs were underestimated. The findings of the study are useful to the current Philippine renewable-energy program in terms of providing: (1) information essential for determining end-users' priority energy needs and for improving technology choice and project design; and (2) justification for promoting auto-generation based on renewable energy sources as alternatives to diesel fuel.« less

Infrared Sky Surveys

NASA Astrophysics Data System (ADS)

Price, Stephan D.

2009-02-01

A retrospective is given on infrared sky surveys from Thomas Edison’s proposal in the late 1870s to IRAS, the first sensitive mid- to far-infrared all-sky survey, and the mid-1990s experiments that filled in the IRAS deficiencies. The emerging technology for space-based surveys is highlighted, as is the prominent role the US Defense Department, particularly the Air Force, played in developing and applying detector and cryogenic sensor advances to early mid-infrared probe-rocket and satellite-based surveys. This technology was transitioned to the infrared astronomical community in relatively short order and was essential to the success of IRAS, COBE and ISO. Mention is made of several of the little known early observational programs that were superseded by more successful efforts.

Medical students' online learning technology needs.

PubMed

Han, Heeyoung; Nelson, Erica; Wetter, Nathan

2014-02-01

This study investigated medical students' online learning technology needs at a medical school. The study aimed to provide evidence-based guidance for technology selection and online learning design in medical education. The authors developed a 120-item survey in collaboration with the New Technology in Medical Education (NTIME) committee at the Southern Illinois University School of Medicine (SIUSOM). Overall, 123 of 290 medical students (42%) at the medical school participated in the survey. The survey focused on five major areas: students' hardware and software use; perception of educational technology (ET) in general; online behaviours; perception of ET use at the school; and demographic information. Students perceived multimedia tools, scheduling tools, communication tools, collaborative authoring tools, learning management systems and electronic health records useful educational technologies for their learning. They did not consider social networking tools useful for their learning, despite their frequent use. Third-year students were less satisfied with current technology integration in the curriculum, information sharing and collaborative learning than other years. Students in clerkships perceived mobile devices as useful for their learning. Students using a mobile device (i.e. a smartphone) go online, text message, visit social networking sites and are online during classes more frequently than non-users. Medical students' ET needs differ between preclinical and clinical years. Technology supporting ubiquitous mobile learning and health information technology (HIT) systems at hospitals and out-patient clinics can be integrated into clerkship curricula. © 2014 John Wiley & Sons Ltd.

Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

PubMed

Blackwell, E; Nesbit, M; Petridis, H

2017-05-12

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

Utilization of dashboard technology in academic radiology departments: results of a national survey.

PubMed

Mansoori, Bahar; Novak, Ronald D; Sivit, Carlos J; Ros, Pablo R

2013-04-01

The aim of this study was to identify the most widely used financial, productivity, and accessibility metrics used by academic radiology departments (ARDs) in a dashboard format via a national survey. The results provide a guide to the selection of preferred or commonly used indicators to facilitate dashboard implementation and use. The study met the criteria for an exemption from institutional review board approval. A cross-sectional survey was conducted using a survey approved by the Society of Chairs of Academic Radiology Departments and sent to its members. The survey was designed to evaluate the adoption, access, and composition of dashboard technology in ARDs, particularly those related to measures of productivity and financial performance. The overall response rate was 42% (56 of 131 members). Sixty-two percent of responding ARDs currently use some form of dashboard technology, but 50% have used this technology for ≤2 years. Sixty-five percent of all ARDs use their dashboard information on a monthly basis. The two dashboard financial indicators most frequently used by ARDs are revenue and actual expenses. Similarly, the two productivity indicators used most widely are total examination volume and examination volume per modality. The two most important access indicators used are report turnaround time and backlog per unit time. Currently, fewer than two-thirds of the responding ARDs use dashboard technology, and one-half have used the technology for ≤2 years. Although some fiscal and productivity indices are more frequently used, there are a diverse number of factors used to measure productivity, finance, access, and other operational parameters in ARD dashboards. Thus, the information provided by each institutional dashboard may be significantly different from that in other ARDs. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Educational Technology Use Among US Colleges and Schools of Pharmacy

PubMed Central

Cain, Jeff J.; Malone, Patrick M.; Chapman, Tracy A.; Walters, Ryan W.; Thompson, David C.; Riedl, Steven T.

2011-01-01

Objective. To develop a searchable database of educational technologies used at schools and colleges of pharmacy. Methods. A cross-sectional survey design was used to determine what educational technologies were being used and to identify an individual at each institution who could serve as an information resource for peer-to-peer questions. Results. Eighty-nine survey instruments were returned for a response rate of 75.4%. The resulting data illustrated the almost ubiquitous presence of educational technology. The most frequently used technology was course management systems and the least frequently used technology was microblogging. Conclusions. Educational technology use is trending toward fee-based products for enterprise-level applications and free, open-source products for collaboration and presentation. Educational technology is allowing educators to restructure classroom time for something other than simple transmission of factual information and to adopt an evidence-based approach to instructional innovation and reform. PMID:21829261

Educational technology use among US colleges and schools of pharmacy.

PubMed

Monaghan, Michael S; Cain, Jeff J; Malone, Patrick M; Chapman, Tracy A; Walters, Ryan W; Thompson, David C; Riedl, Steven T

2011-06-10

To develop a searchable database of educational technologies used at schools and colleges of pharmacy. A cross-sectional survey design was used to determine what educational technologies were being used and to identify an individual at each institution who could serve as an information resource for peer-to-peer questions. Eighty-nine survey instruments were returned for a response rate of 75.4%. The resulting data illustrated the almost ubiquitous presence of educational technology. The most frequently used technology was course management systems and the least frequently used technology was microblogging. Educational technology use is trending toward fee-based products for enterprise-level applications and free, open-source products for collaboration and presentation. Educational technology is allowing educators to restructure classroom time for something other than simple transmission of factual information and to adopt an evidence-based approach to instructional innovation and reform.

Sensor Web Technology Challenges and Advancements for the Earth Science Decadal Survey Era

NASA Technical Reports Server (NTRS)

Norton, Charles D.; Moe, Karen

2011-01-01

This paper examines the Earth science decadal survey era and the role ESTO developed sensor web technologies can contribute to the scientific observations. This includes hardware and software technology advances for in-situ and in-space measurements. Also discussed are emerging areas of importance such as the potential of small satellites for sensor web based observations as well as advances in data fusion critical to the science and societal benefits of future missions, and the challenges ahead.

Small Rov Marine Boat for Bathymetry Surveys of Shallow Waters - Potential Implementation in Malaysia

NASA Astrophysics Data System (ADS)

Suhari, K. T.; Karim, H.; Gunawan, P. H.; Purwanto, H.

2017-10-01

Current practices in bathymetry survey (available method) are indeed having some limitations. New technologies for bathymetry survey such as using unmanned boat has becoming popular in developed countries - filled in and served those limitations of existing survey methods. Malaysia as one of tropical country has it own river/water body characteristics and suitable approaches in conducting bathymetry survey. Thus, a study on this emerging technology should be conducted using enhanced version of small ROV boat with Malaysian rivers and best approaches so that the surveyors get benefits from the innovative surveying product. Among the available ROV boat for bathymetry surveying in the market, an Indonesian product called SHUMOO is among the promising products - economically and practically proven using a few sample areas in Indonesia. The boat was equipped and integrated with systems of remote sensing technology, GNSS, echo sounder and navigational engine. It was designed for riverbed surveys on shallow area such as small /medium river, lakes, reservoirs, oxidation/detention pond and other water bodies. This paper tries to highlight the needs and enhancement offered to Malaysian' bathymetry surveyors/practitioners on the new ROV boat which make their task easier, faster, safer, economically effective and better riverbed modelling results. The discussion continues with a sample of Indonesia river (data collection and modelling) since it is mostly similar to Malaysia's river characteristics and suggests some improvement for Malaysia best practice.

A survey of urological manpower, technology, and resources in Canada.

PubMed

Pommerville, Peter; Goldenberg, S Larry; Wilson, James W L; Fradet, Yves; Corcos, Jacques; Morris, Brian A P

2004-06-01

Knowledge of the current status of manpower and resources is important in understanding the state of any medical specialty, and critical in planning for future recruitment, funding and infrastructure development. In 2003, the Canadian Urological Association (CUA) conducted two nationwide surveys examining manpower, resources, and the technology available. One survey went only to academic and hospital leaders across the country (the resources survey), while the other was sent to the entire general membership of the CUA. The response rate for the resources survey was 67%, while that for the membership survey was 50.4%. The respondents' ages were evenly distributed, with the modal 5-year range being 51 to 55 years of age. Eighty-eight percent of respondents were Canadian-trained. Two-thirds of respondents spent over 80% of their practice time in direct patient care, and most practiced general urology. The majority of respondents practiced in smaller hospitals: 57.6% in centres with 300 or fewer inpatient beds, and 47.2% of centres reported < 500 procedures/year. Community hospitals (62% of responses to the resources survey) generally had fewer advanced technologies than academic centres. A quarter of the cystoscopy equipment used by respondents was over 15 years old. The results of these surveys present a snapshot of the current state of urology resources and manpower across Canada, potentially allowing better planning and negotiations with hospitals and governments.

Vulnerability and social justice as factors in emergent U.S. nanotechnology risk perceptions.

PubMed

Conti, Joseph; Satterfield, Terre; Harthorn, Barbara Herr

2011-11-01

As an emerging domain of risk research, nanotechnologies engender novel research questions, including how new technologies are encountered given different framing and contextual detail. Using data from a recent U.S. national survey of perceived risks (N= 1,100), risk versus benefit framings and the specific social positions from which people encounter or perceive new technologies are explored. Results indicate that vulnerability and attitudes toward environmental justice significantly influenced risk perceptions of nanotechnology as a broad class, while controlling for demographic and affective factors. Comparative analyses of different examples of nanotechnology applications demonstrated heightened ambivalence across acceptability when risk versus benefit information was provided with application descriptions (described in short vignettes as compared to the general category "nanotechnology," absent of risk or benefit information). The acceptability of these nano-specific vignettes varied significantly in only some cases given indexes of vulnerability and attitudes toward environmental justice. However, experimental narrative analyses, using longer, more comprehensive descriptive passages, show how assessments of risks and benefits are tied to the systematically manipulated psychometric qualities of the application (its invasiveness and controllability), risk messaging from scientists, and the social implications of the technology with regard to justice. The article concludes with discussion of these findings for risk perception research and public policy related to nanotechnology and possibly other emerging technologies. © 2011 Society for Risk Analysis.

Controllable Solid Propulsion Combustion and Acoustic Knowledge Base Improvements

NASA Technical Reports Server (NTRS)

McCauley, Rachel; Fischbach, Sean; Fredrick, Robert

2012-01-01

Controllable solid propulsion systems have distinctive combustion and acoustic environments that require enhanced testing and analysis techniques to progress this new technology from development to production. In a hot gas valve actuating system, the movement of the pintle through the hot gas exhibits complex acoustic disturbances and flow characteristics that can amplify induced pressure loads that can damage or detonate the rocket motor. The geometry of a controllable solid propulsion gas chamber can set up unique unsteady flow which can feed acoustic oscillations patterns that require characterization. Research in this area aids in the understanding of how best to design, test, and analyze future controllable solid rocket motors using the lessons learned from past government programs as well as university research and testing. This survey paper will give the reader a better understanding of the potentially amplifying affects propagated by a controllable solid rocket motor system and the knowledge of the tools current available to address these acoustic disturbances in a preliminary design. Finally the paper will supply lessons learned from past experiences which will allow the reader to come away with understanding of what steps need to be taken when developing a controllable solid rocket propulsion system. The focus of this survey will be on testing and analysis work published by solid rocket programs and from combustion and acoustic books, conference papers, journal articles, and additionally from subject matter experts dealing currently with controllable solid rocket acoustic analysis.

The Development of a Myoelectric Training Tool for Above-Elbow Amputees

PubMed Central

Dawson, Michael R; Fahimi, Farbod; Carey, Jason P

2012-01-01

The objective of above-elbow myoelectric prostheses is to reestablish the functionality of missing limbs and increase the quality of life of amputees. By using electromyography (EMG) electrodes attached to the surface of the skin, amputees are able to control motors in myoelectric prostheses by voluntarily contracting the muscles of their residual limb. This work describes the development of an inexpensive myoelectric training tool (MTT) designed to help upper limb amputees learn how to use myoelectric technology in advance of receiving their actual myoelectric prosthesis. The training tool consists of a physical and simulated robotic arm, signal acquisition hardware, controller software, and a graphical user interface. The MTT improves over earlier training systems by allowing a targeted muscle reinnervation (TMR) patient to control up to two degrees of freedom simultaneously. The training tool has also been designed to function as a research prototype for novel myoelectric controllers. A preliminary experiment was performed in order to evaluate the effectiveness of the MTT as a learning tool and to identify any issues with the system. Five able-bodied participants performed a motor-learning task using the EMG controlled robotic arm with the goal of moving five balls from one box to another as quickly as possible. The results indicate that the subjects improved their skill in myoelectric control over the course of the trials. A usability survey was administered to the subjects after their trials. Results from the survey showed that the shoulder degree of freedom was the most difficult to control. PMID:22383905

The development of a myoelectric training tool for above-elbow amputees.

PubMed

Dawson, Michael R; Fahimi, Farbod; Carey, Jason P

2012-01-01

The objective of above-elbow myoelectric prostheses is to reestablish the functionality of missing limbs and increase the quality of life of amputees. By using electromyography (EMG) electrodes attached to the surface of the skin, amputees are able to control motors in myoelectric prostheses by voluntarily contracting the muscles of their residual limb. This work describes the development of an inexpensive myoelectric training tool (MTT) designed to help upper limb amputees learn how to use myoelectric technology in advance of receiving their actual myoelectric prosthesis. The training tool consists of a physical and simulated robotic arm, signal acquisition hardware, controller software, and a graphical user interface. The MTT improves over earlier training systems by allowing a targeted muscle reinnervation (TMR) patient to control up to two degrees of freedom simultaneously. The training tool has also been designed to function as a research prototype for novel myoelectric controllers. A preliminary experiment was performed in order to evaluate the effectiveness of the MTT as a learning tool and to identify any issues with the system. Five able-bodied participants performed a motor-learning task using the EMG controlled robotic arm with the goal of moving five balls from one box to another as quickly as possible. The results indicate that the subjects improved their skill in myoelectric control over the course of the trials. A usability survey was administered to the subjects after their trials. Results from the survey showed that the shoulder degree of freedom was the most difficult to control.

High-Temperature Modal Survey of a Hot-Structure Control Surface

NASA Technical Reports Server (NTRS)

Spivey, Natalie D.

2011-01-01

Ground vibration tests are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicles, thermoelastic vibration testing techniques are neither well established nor routinely performed. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. When high-temperature materials, which increase in stiffness when heated, are incorporated into a hot-structure that contains metallic components that decrease in stiffness when heated, the interaction between those materials can affect the hypersonic flutter analysis. A high-temperature modal survey will expand the research database for hypersonics and improve the understanding of this dual-material interaction. This report discusses the vibration testing of the carbon-silicon carbide Ruddervator Subcomponent Test Article, which is a truncated version of a full-scale hot-structure control surface. Two series of room-temperature modal test configurations were performed in order to define the modal characteristics of the test article during the elevated-temperature modal survey: one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary). Testing was performed in the NASA Dryden Flight Research Center Flight Loads Laboratory Large Nitrogen Test Chamber.

Engaging scientists: An online survey exploring the experience of innovative biotechnological approaches to controlling vector-borne diseases.

PubMed

Boëte, Christophe; Beisel, Uli; Reis Castro, Luísa; Césard, Nicolas; Reeves, R Guy

2015-08-10

Pioneering technologies (e.g., nanotechnology, synthetic biology or climate engineering) are often associated with potential new risks and uncertainties that can become sources of controversy. The communication of information during their development and open exchanges between stakeholders is generally considered a key issue in their acceptance. While the attitudes of the public to novel technologies have been widely considered there has been relatively little investigation of the perceptions and awareness of scientists working on human or animal diseases transmitted by arthropods. Consequently, we conducted a global survey on 1889 scientists working on aspects of vector-borne diseases, exploring, under the light of a variety of demographic and professional factors, their knowledge and awareness of an emerging biotechnology that has the potential to revolutionize the control of pest insect populations. Despite extensive media coverage of key developments (including releases of manipulated mosquitoes into human communities) this has in only one instance resulted in scientist awareness exceeding 50% on a national or regional scale. We document that awareness of pioneering releases significantly relied on private communication sources that were not equally accessible to scientists from countries with endemic vector-borne diseases (dengue and malaria). In addition, we provide quantitative analysis of the perceptions and knowledge of specific biotechnological approaches to controlling vector-borne disease, which are likely to impact the way in which scientists around the world engage in the debate about their value. Our results indicate that there is scope to strengthen already effective methods of communication, in addition to a strong demand by scientists (expressed by 79.9% of respondents) to develop new, creative modes of public engagement.

Real-time audiovisual feedback system in a physician-staffed helicopter emergency medical service in Finland: the quality results and barriers to implementation.

PubMed

Sainio, Marko; Kämäräinen, Antti; Huhtala, Heini; Aaltonen, Petri; Tenhunen, Jyrki; Olkkola, Klaus T; Hoppu, Sanna

2013-07-01

To evaluate the quality of cardiopulmonary resuscitation (CPR) in a physician staffed helicopter emergency medical service (HEMS) using a monitor-defibrillator with a quality analysis feature. As a post hoc analysis, the potential barriers to implementation were surveyed. The quality of CPR performed by the HEMS from November 2008 to April 2010 was analysed. To evaluate the implementation rate of quality analysis, the HEMS database was screened for all cardiac arrest missions during the study period. As a consequence of the observed low implementation rate, a survey was sent to physicians working in the HEMS to evaluate the possible reasons for not utilizing the automated quality analysis feature. During the study period, the quality analysis was used for 52 out of 187 patients (28%). In these cases the mean compression depth was < 40 mm in 46% and < 50 mm in 96% of the 1-min analysis intervals, but otherwise CPR quality corresponded with the 2005 resuscitation guidelines. In particular, the no-flow fraction was remarkably low 0.10 (0.07, 0.16). The most common reasons for not using quality-controlled CPR were that the device itself was not taken to the scene, or not applied to the patient, because another EMS unit was already treating the patient with another defibrillator. When quality-controlled CPR technology was used, the indicators of good quality CPR as described in the 2005 resuscitation guidelines were mostly achieved albeit with sufficient compression depth. The use of the well-described technology in improving patient care was low. Wider implementation of the automated quality control and feedback feature in defibrillators could further improve the quality of CPR on the field. ClinicalTrials.gov (NCT00951704).

Rural ITS non-rider survey findings

DOT National Transportation Integrated Search

2002-10-01

This report summarizes the findings from a telephone survey designed to measure the potential impact of intelligent transportation system (ITS) technologies in rural communities. The survey follows previous research conducted for the U.S. Department ...

System analysis approach to deriving design criteria (Loads) for Space Shuttle and its payloads. Volume 2: Typical examples

NASA Technical Reports Server (NTRS)

Ryan, R. S.; Bullock, T.; Holland, W. B.; Kross, D. A.; Kiefling, L. A.

1981-01-01

The achievement of an optimized design from the system standpoint under the low cost, high risk constraints of the present day environment was analyzed. Space Shuttle illustrates the requirement for an analysis approach that considers all major disciplines (coupling between structures control, propulsion, thermal, aeroelastic, and performance), simultaneously. The Space Shuttle and certain payloads, Space Telescope and Spacelab, are examined. The requirements for system analysis approaches and criteria, including dynamic modeling requirements, test requirements, control requirements, and the resulting design verification approaches are illustrated. A survey of the problem, potential approaches available as solutions, implications for future systems, and projected technology development areas are addressed.

Feasibility of modern airships - Preliminary assessment

NASA Technical Reports Server (NTRS)

Ardema, M. D.

1977-01-01

Attention is given to the NASA program, Feasibility Study of Modern Airships, initiated to investigate potential research and technology programs associated with airship development. A historical survey of the program is presented, including the development of past airship concepts, aerodynamical and design improvements, structure and material concepts, and research in controls, avionics, instrumentation, flight operations, and ground handling. A mission analysis was carried out which considered passenger and cargo transportation, heavy-lift, short-haul applications, surveillance missions, and the transportation of natural gas. A vehicle parametric analysis examined the entire range of airship concepts, discussing both conventional airships and hybrids. Various design options were evaluated, such as choice of structural materials, use of boundary-layer control, and choice of lifting gas.

Trends in transport aircraft avionics

NASA Technical Reports Server (NTRS)

Berkstresser, B. K.

1973-01-01

A survey of avionics onboard present commercial transport aircraft was conducted to identify trends in avionics systems characteristics and to determine the impact of technology advances on equipment weight, cost, reliability, and maintainability. Transport aircraft avionics systems are described under the headings of communication, navigation, flight control, and instrumentation. The equipment included in each section is described functionally. However, since more detailed descriptions of the equipment can be found in other sources, the description is limited and emphasis is put on configuration requirements. Since airborne avionics systems must interface with ground facilities, certain ground facilities are described as they relate to the airborne systems, with special emphasis on air traffic control and all-weather landing capability.

The Use of BS7799 Information Security Standard to Construct Mechanisms for the Management of Medical Organization Information Security

NASA Astrophysics Data System (ADS)

Liu, Shu-Fan; Chueh, Hao-En; Liao, Kuo-Hsiung

According to surveys, 80 % of security related events threatening information in medical organizations is due to improper management. Most research on information security has focused on information and security technology, such as network security and access control; rarely addressing issues at the management issues. The main purpose of this study is to construct a BS7799 based mechanism for the management of information with regard to security as it applies to medical organizations. This study analyzes and identifies the most common events related to information security in medical organizations and categorizes these events as high-risk, transferable-risk, and controlled-risk to facilitate the management of such risk.

Two-Year ET Programs: Essential Topics and Levels of Proficiency.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

1990-01-01

Reports the results of a survey of graduates, employers, and instructors of engineering technology programs for the essential topics in mechanical engineering technology, mechanical drafting/design technology, manufacturing engineering technology, and industrial engineering technology. Identifies the proficiency level suggested for classwork and…

Acceptability of delivering and accessing health information through text messaging among community health advisors.

PubMed

Schoenberger, Yu-Mei; Phillips, Janice; Mohiuddin, Mohammed Omar; McNees, Patrick; Scarinci, Isabel

2013-09-09

Communication technologies can play a significant role in decreasing communication inequalities and cancer disparities by promoting cancer control and enhancing population and individual health. Studies have shown that technology, such as the mobile phone short message service (SMS) or text messaging, can be an effective health communication strategy that influences individuals' health-related decisions, behaviors, and outcomes. The purpose of this study was to explore usage of communication technologies, assess the acceptability of mobile technology for delivery and access of health information, and identify cancer and health information needs among Deep South Network for Cancer Control trained Community Health Advisors as Research Partners (CHARPs). A mixed-method design was used, and a triangulation protocol was followed to combine quantitative and qualitative data. Focus groups (4 focus groups; n=37) and self-administered surveys (n=77) were conducted to determine CHARPs mobile phone and text message usage. The objective was to include identification of barriers and facilitators to a mobile phone intervention. All participants were African American (37/37, 100%), 11/37 (89%) were women, and the mean age was 53.4 (SD 13.9; focus groups) and 59.9 (SD 8.7; survey). Nearly all (33/37, 89%) of focus group participants reported owning a mobile phone. Of those, 8/33 (24%) owned a smartphone, 22/33 (67%) had a text messaging plan, and 18/33 (55%) and 11/33 (33%) received and sent text messages several times a week or day, respectively. Similar responses were seen among the survey participants, with 75/77 (97%) reporting owning a mobile phone, and of those, 22/75 (30%) owned a smartphone, 39/75 (53%) had a text messaging plan, and 37/75 (50%) received and 27/75 (37%) sent text messages several times a week or day. The benefits of a text messaging system mentioned by focus group participants included alternative form of communication, quick method for disseminating information, and privacy of communication. The main barriers reported by both groups to using mobile technology to receive health information were cost and not knowing how to text message. Ways to overcome barriers were explored with focus group participants, and education was the most proposed solution. Majority of CHARPs were in favor of receiving a weekly text message that would provide cancer/health information. The findings from this study indicate that CHARPs are receptive to receiving text messages focusing on cancer/health information and would be likely to engage in mobile health research. These findings represent the first step in the development of an interactive mobile health program designed to provide cancer/health information and a support network for the Deep South Network Community Health Advisors as Research Partners (DSN CHARPs).

Evaluating the Impact of Technology Integration in Teaching and Learning

ERIC Educational Resources Information Center

Adedokun-Shittu, Nafisat Afolake; Shittu, Abdul Jaleel Kehinde

2014-01-01

This article reports the impacts of technology integration on teaching and learning from a study that examines the impact of ICT deployment in teaching and learning at a University in Nigeria. The survey data were drawn from 593 respondents (students and lecturers) and the survey instrument employed for both the students and the lecturers is a…

A Survey of Medical Technology Graduates of Illinois State University: 1972-1979.

ERIC Educational Resources Information Center

Spencer, Charles T.

A sample of 170 graduates of the medical technology program at Illinois State University was surveyed to investigate their educational background and their employment history. A total of 228 questionnaires were mailed to all graduates from 1972 through 1979. The demographic data of the ratio of females to males in the field of medical technology…

Why Women Choose Information Technology Careers: Educational, Social, and Familial Influences.

ERIC Educational Resources Information Center

Turner, Sandra V.; Bernt, Phyllis W.; Pecora, Norma

The educational, social, and familial influences that lead women to choose information technology (IT) careers were examined in an online survey. Of the 2,500 women who were employed in IT careers in 38 countries and who belonged to the IT professional organization, Systers, 275 responded to the online survey (11% response rate). The respondents…

2016 Emerging Technology Domains Risk Survey

DTIC Science & Technology

2016-04-05

2016 Emerging Technology Domains Risk Survey Christopher King Dan Klinedinst Todd Lewellen Garret Wassermann April 2016 TECHNICAL REPORT...Unlimited [Checkoway 2011] Checkoway, Stephen; McCoy, Damon; Kantor, Brian; Anderson, Danny; Shacham, Hovav; Savage, Stefan. Comprehensive Experimental ...Koscher 2010] Koscher, Karl et al. “ Experimental Security Analysis of a Modern Automobile,” 447-462. IEEE Symposium on Security and Privacy

Statistics on Science and Technology in Latin America, Experience with UNESCO Pilot Projects, 1972-1974.

ERIC Educational Resources Information Center

Thebaud, Schiller

This report examines four UNESCO pilot projects undertaken in 1972 in Brazil, Colombia, Peru, and Uruguay to study the methods used for national statistical surveys of science and technology. The projects specifically addressed the problems of comparing statistics gathered by different methods in different countries. Surveys carried out in Latin…

Connected to Learn: Teachers' Experiences with Networked Technologies in the Classroom

ERIC Educational Resources Information Center

Johnson, Matthew; Riel, Richard; Germain-Froese, Bernie

2016-01-01

To get a better understanding of how networked technologies are impacting teachers and their teaching practices, in 2015 MediaSmarts partnered with the Canadian Teachers' Federation to survey 4,043 K-12 teachers and school administrators who were teaching in classroom settings across the country. The survey explored the extent to which networked…

An Exploratory Study of the Factors Associated with Literacy Teachers' Integration of Technology: A Study of Lebanese Schools

ERIC Educational Resources Information Center

Chaaban, Youmen; Moloney, Robyn

2016-01-01

The purpose of this study is to explore Lebanese teachers' perceptions of the factors determining their integration of technology into literacy classrooms. A quantitative survey examining literacy teachers' individual characteristics and their perceptions of contextual factors was conducted at Lebanese schools. The survey collected data on the…

A Survey to Examine Teachers' Perceptions of Design Dispositions, Lesson Design Practices, and Their Relationships with Technological Pedagogical Content Knowledge (TPACK)

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Chai, Ching Sing; Hong, Huang-Yao; Tsai, Chin-Chung

2015-01-01

This study investigates 201 Singaporean teachers' perceptions of their technological pedagogical content knowledge (TPACK), lesson design practices, and design dispositions through a survey instrument. Investigation of these constructs reveal important variables influencing teachers' perceptions of TPACK which have not yet been explored. The…

Use of medical technologies in rehabilitation medicine settings in Israel: results of the TECHNO-R 2005 survey.

PubMed

Ring, Haim; Keren, Ofer; Zwecker, Manuel; Dynia, Aida

2007-10-01

With the development of computer technology and the high-tech electronic industry over the past 30 years, the technological age is flourishing. New technologies are continually being introduced, and questions regarding the economic viability of these technologies need to be addressed. To identify the medical technologies currently in use in different rehabilitation medicine settings in Israel. The TECHNO-R 2005 survey was conducted in two phases. Beginning in 2004, the first survey used a questionnaire with open questions relating to the different technologies in clinical use, including questions on their purpose, who operates the device (technician, physiotherapist, occupational therapist, physician, etc.), and a description of the treated patients. This questionnaire was sent to 31 rehabilitation medicine facilities in Israel. Due to difficulties in comprehension of the term "technology," a second revised standardized questionnaire with closed-ended questions specifying diverse technologies was introduced in 2005. The responder had to mark from a list of 15 different medical technologies which were in use in his or her facility, as well as their purpose, who operates the device, and a description of the treated patients. Transcutaneous electrical nerve stimulation, the TILT bed, continuous passive movement, and therapeutic ultrasound were the most widely used technologies in rehabilitation medicine facilities. Monitoring of the sitting position in the wheelchair, at the bottom of the list, was found to be the least used technology (with 15.4% occurrence). Most of the technologies are used primarily for treatment purposes and to a lesser degree for diagnosis and research. Our study poses a fundamental semantic and conceptual question regarding what kind of technologies are or should be part of the standard equipment of any accredited rehabilitation medicine facility for assessment, treatment and/or research. For this purpose, additional data are needed.

Hurdles in tissue engineering/regenerative medicine product commercialization: a pilot survey of governmental funding agencies and the financial industry.

PubMed

Bertram, Timothy A; Tentoff, Edward; Johnson, Peter C; Tawil, Bill; Van Dyke, Mark; Hellman, Kiki B

2012-11-01

The Tissue Engineering and Regenerative Medicine International Society of the Americas (TERMIS-AM) Industry Committee conducted a semiquantitative opinion survey in 2010 to delineate potential hurdles to commercialization perceived by the TERMIS constituency groups that participate in the stream of technology commercialization (academia, start-up companies, development-stage companies, and established companies). A significant hurdle identified consistently by each group was access to capital for advancing potential technologies into development pathways leading to commercialization. A follow-on survey was developed by the TERMIS-AM Industry Committee to evaluate the financial industry's perspectives on investing in regenerative medical technologies. The survey, composed of 15 questions, was developed and provided to 37 investment organizations in one of three sectors (governmental, private, and public investors). The survey was anonymous and confidential with sector designation the only identifying feature of each respondent's organization. Approximately 80% of the survey was composed of respondents from the public (n=14) and private (n=15) sectors. Each respondent represents one investment organization with the potential of multiple participants participating to form the organization's response. The remaining organizations represented governmental agencies (n=8). Results from this survey indicate that a high percentage (<60%) of respondents (governmental, private, and public) were willing to invest >$2MM into regenerative medical companies at the different stages of a company's life cycle. Investors recognized major hurdles to this emerging industry, including regulatory pathway, clinical translation, and reimbursement of these new products. Investments in regenerative technologies have been cyclical over the past 10-15 years, but investors recognized a 1-5-year investment period before the exit via Merger and Acquisition (M&A). Investors considered musculoskeletal products and their top technology choice with companies in the clinical stage of development being the most preferred investment targets. All sectors indicated a limited interest in early-stage start-up companies potentially explaining why start-up companies have struggled to access to capital and investors based their investment on the stage of a company's life cycle, reflecting each sector's risk tolerance, exit strategy, time of holding an investment, and investment strategy priorities. Investors highlighted the limited number of regenerative medical companies that have achieved commercial status as a basis for why public investors have been approached by so few companies. Based on respondents to this survey, regenerative medical sponsors seeking capital from the financial industry must keep the explanation of their technology simple, since all sectors considered regenerative medical technology as difficult to evaluate. This survey's results indicate that under the current financial environment, many regenerative medical companies must consider codevelopment or even M&A as nondilutive means of raising capital. The overall summary for this survey highlights the highly varied goals and motivations for the various sectors of the government and financial industries.

PDA survey of quality risk management practices in the pharmaceutical, devices, & biotechnology industries.

PubMed

Ahmed, Ruhi; Baseman, Harold; Ferreira, Jorge; Genova, Thomas; Harclerode, William; Hartman, Jeffery; Kim, Samuel; Londeree, Nanette; Long, Michael; Miele, William; Ramjit, Timothy; Raschiatore, Marlene; Tomonto, Charles

2008-01-01

In July 2006 the Parenteral Drug Association's Risk Management Task Force for Aseptic Processes, conducted an electronic survey of PDA members to determine current industry practices regarding implementation of Quality Risk Management in their organizations. This electronic survey was open and publicly available via the PDA website and targeted professionals in our industry who are involved in initiating, implementing, or reviewing risk management programs or decisions in their organizations. One hundred twenty-nine members participated and their demographics are presented in the sidebar "Correspondents Profile". Among the major findings are: *The "Aseptic Processing/Filling" operation is the functional area identified as having the greatest need for risk assessment and quality risk management. *The most widely used methodology in industry to identify risk is Failure Mode and Effects Analysis (FMEA). This tool was most widely applied in assessing change control and for adverse event, complaint, or failure investigations. *Despite the fact that personnel training was identified as the strategy most used for controlling/minimizing risk, the largest contributors to sterility failure in operations are still "Personnel". *Most companies still rely on "Manufacturing Controls" to mitigate risk and deemed the utilization of Process Analytical Technology (PAT) least important in this aspect. *A majority of correspondents verified that they did not periodically assess their risk management programs. *A majority of the correspondents desired to see case studies or examples of risk analysis implementation (as applicable to aseptic processing) in future PDA technical reports on risk management.

High-Temperature Modal Survey of a Hot-Structure Control Surface

NASA Technical Reports Server (NTRS)

Spivey, Natalie Dawn

2010-01-01

Ground vibration tests or modal surveys are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicle applications, thermoelastic vibration testing techniques are not well established and are not routinely performed for supporting hypersonic flutter analysis. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. High-temperature materials have the unique property of increasing in stiffness when heated. When these materials are incorporated into a hot-structure, which includes metallic components that decrease in stiffness with increasing temperature, the interaction between the two materials systems needs to be understood because that interaction could ultimately affect the hypersonic flutter analysis. Performing a high-temperature modal survey will expand the research database for hypersonics and will help build upon the understanding of the dual material interaction. This paper will discuss the vibration testing of the Carbon-Silicon Carbide Ruddervator Subcomponent Test Article which is a truncated version of the full-scale X-37 hot-structure control surface. In order to define the modal characteristics of the test article during the elevated-temperature modal survey, two series of room-temperature modal test configurations had to be performed. The room-temperature test series included one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary condition) in NASA Dryden's Flight Loads Lab large nitrogen test chamber.

Assessing the Role of Technology in Citizen Science: A Volunteer's Perspective

NASA Astrophysics Data System (ADS)

Wei, J. H.; Force, A.

2017-12-01

From a volunteer's perspective, citizen science can provide a direct connection between outdoor enthusiasts and the scientists who study these natural environments. These experiences are both rewarding and engaging, as participants become aware of field sites, the scientific method, and their own environmental impacts. Recent technological advances (i.e. smart phones and mobile applications) have the potential to transform citizen science, specifically as technology can both enable and modernize the networks between a large community of potential volunteers and scientists using these data. By providing volunteers who venture into largely understudied and remote areas with an easy method for data collection and entry, it becomes easier to encourage volunteer engagement in science, while maintaining quality control over the data collection process. Participating in Adventure Scientists' projects demonstrates the application of technology as an effective engagement tool, especially when compared to traditional pen and paper surveys often conducted. Pairing volunteers with simple, familiar technology increases engagement, particularly for volunteers otherwise intimidated by the scientific process. When equipped with useful features, such as GPS functionality, smartphone apps offer a simple and standardized method of data collection and description. Yet a variety of factors can complicate field sampling; final choices are ultimately left to the judgment of the volunteer and perhaps could be guided by use of a phone/app. Importantly, Adventure Scientists conducts follow ups and volunteer surveys, which are critical to the continued evaluation of volunteer experiences and the sampling methods themselves. For future projects, creating a forum in which scientists and volunteers can interact (perhaps also through a phone app) could provide scientific context for volunteers, further investing them in the scientific process and their continued participation. Overall, the Adventure Scientists' approach provides a model for connecting science with the growing outdoor recreation community; by embracing technology already in our pockets, scientists can hope to connect with more participants and future generations to come.

Using decision pathway surveys to inform climate engineering policy choices

PubMed Central

Gregory, Robin; Satterfield, Terre; Hasell, Ariel

2016-01-01

Over the coming decades citizens living in North America and Europe will be asked about a variety of new technological and behavioral initiatives intended to mitigate the worst impacts of climate change. A common approach to public input has been surveys whereby respondents’ attitudes about climate change are explained by individuals’ demographic background, values, and beliefs. In parallel, recent deliberative research seeks to more fully address the complex value tradeoffs linked to novel technologies and difficult ethical questions that characterize leading climate mitigation alternatives. New methods such as decision pathway surveys may offer important insights for policy makers by capturing much of the depth and reasoning of small-group deliberations while meeting standard survey goals including large-sample stakeholder engagement. Pathway surveys also can help participants to deepen their factual knowledge base and arrive at a more complete understanding of their own values as they apply to proposed policy alternatives. The pathway results indicate more fully the conditional and context-specific nature of support for several “upstream” climate interventions, including solar radiation management techniques and carbon dioxide removal technologies. PMID:26729883

Involvement of consumers in health technology assessment activities by Inahta agencies.

PubMed

Hailey, David; Werkö, Sophie; Bakri, Rugayah; Cameron, Alun; Göhlen, Britta; Myles, Susan; Pwu, Jasmine; Yothasamut, Jomkwan

2013-01-01

To obtain further information from members of the International Network of Agencies for Health Technology Assessment (INAHTA) on the involvement of consumers in their programs. A questionnaire for a survey was developed and sent to member agencies in November 2010. Survey responses were compared with those from an earlier survey conducted in 2005. Of the thirty-three agencies that provided responses, 67 percent involve consumers in some aspects of their health technology assessment (HTA) programs, compared with 57 percent in 2005. As in the earlier survey, most agencies reporting involvement have contact with consumer or patient organizations and a large minority also involve individual consumers. Summaries of HTA reports that are intended to be easily understood by consumers are prepared by 84 percent of the agencies, and 42 percent involve consumers in dissemination of HTA material. In both areas, there was some increase from the levels previously reported. The survey results suggest that there is a trend to increased involvement of consumers by the INAHTA agencies in their programs but that the level of involvement remains relatively limited. The manner of consumer participation varies between agencies.

Using decision pathway surveys to inform climate engineering policy choices.

PubMed

Gregory, Robin; Satterfield, Terre; Hasell, Ariel

2016-01-19

Over the coming decades citizens living in North America and Europe will be asked about a variety of new technological and behavioral initiatives intended to mitigate the worst impacts of climate change. A common approach to public input has been surveys whereby respondents' attitudes about climate change are explained by individuals' demographic background, values, and beliefs. In parallel, recent deliberative research seeks to more fully address the complex value tradeoffs linked to novel technologies and difficult ethical questions that characterize leading climate mitigation alternatives. New methods such as decision pathway surveys may offer important insights for policy makers by capturing much of the depth and reasoning of small-group deliberations while meeting standard survey goals including large-sample stakeholder engagement. Pathway surveys also can help participants to deepen their factual knowledge base and arrive at a more complete understanding of their own values as they apply to proposed policy alternatives. The pathway results indicate more fully the conditional and context-specific nature of support for several "upstream" climate interventions, including solar radiation management techniques and carbon dioxide removal technologies.

SMART-X: Square Meter, Arcsecond Resolution Telescope for X-rays

NASA Astrophysics Data System (ADS)

Vikhlinin, Alexey; SMART-X Collaboration

2013-04-01

SMART-X is a concept for a next-generation X-ray observatory with large-area, 0.5" angular resolution grazing incidence adjustable X-ray mirrors, high-throughput critical angle transmission gratings, and X-ray microcalorimeter and CMOS-based imager in the focal plane. High angular resolution is enabled by new technology based on controlling the shape of mirror segments using thin film piezo actuators deposited on the back surface. Science applications include observations of growth of supermassive black holes since redshifts of ~10, ultra-deep surveys over 10's of square degrees, galaxy assembly at z=2-3, as well as new opportunities in the high-resolution X-ray spectroscopy and time domains. We also review the progress in technology development, tests, and mission design over the past year.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot retrieves a sample during a demonstration of the level two challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Sample Return Robot Challenge staff members confer before the team Survey robots makes it's attempt at the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot is seen as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Spectators watch as the team Survey robot conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Members of team Survey follow their robot as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team survey robot is seen on the starting platform before begging it's attempt at the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

The team Survey robot is seen as it conducts a demonstration of the level two challenge at the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-12

Team Survey's robot is seen as it conducts a demonstration of the level two challenge during the 2014 NASA Centennial Challenges Sample Return Robot Challenge, Thursday, June 12, 2014, at the Worcester Polytechnic Institute (WPI) in Worcester, Mass. Eighteen teams are competing for a $1.5 million NASA prize purse. Teams will be required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge is to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Older Adults and Emerging Digital Service Delivery: A Mixed Methods Study on Information and Communications Technology Use, Skills, and Attitudes.

PubMed

Siren, Anu; Knudsen, Sine Grønborg

2017-01-01

Based on data from a survey (n = 3291) and 14 qualitative interviews among Danish older adults, this study investigated the use of, and attitudes toward, information communications technology (ICT) and the digital delivery of public services. While age, gender, and socioeconomic status were associated with use of ICT, these determinants lost their explanatory power when we controlled for attitudes and experiences. We identified three segments that differed in their use of ICT and attitudes toward digital service delivery. As nonuse of ICT often results from the lack of willingness to use it rather than from material or cognitive deficiencies, policy measures for bridging the digital divide should focus on skills and confidence rather than on access or ability.

Reconstructing the Pupils Attitude towards Technology-Survey

ERIC Educational Resources Information Center

Ardies, Jan; De Maeyer, Sven; Gijbels, David

2013-01-01

In knowledge based economies technological literacy is gaining interest. Technological literacy correlates with attitude towards technology. When measuring technological literacy as an outcome of education, the attitudinal dimension has to be taken into account. This requires a valid, reliable instrument that should be as concise as possible, in…

Technology Facilitation in the Rural School: An Analysis of Options.

ERIC Educational Resources Information Center

Hawkes, Mark; Halverson, Pamela; Brockmueller, Bradley

2002-01-01

A study examining technology support in rural schools surveyed 129 school technology coordinators in four upper plains states. Heavy pedagogical and technical demands were placed on rural technology coordinators. Rural technology coordinators should have teaching experience and advanced degree work in network administration, computer hardware…

75 FR 80833 - Shipboard Air Emission Reduction Technology Report

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... Reduction Technology Report AGENCY: Coast Guard, DHS. ACTION: Notice and request for comments. SUMMARY: In... Protection Agency, on Ship Emission Reduction Technology for cargo and passenger vessels that operate in... will survey new technology and new applications of existing technology for reducing air emissions from...

A survey on dielectric elastomer actuators for soft robots.

PubMed

Gu, Guo-Ying; Zhu, Jian; Zhu, Li-Min; Zhu, Xiangyang

2017-01-23

Conventional industrial robots with the rigid actuation technology have made great progress for humans in the fields of automation assembly and manufacturing. With an increasing number of robots needing to interact with humans and unstructured environments, there is a need for soft robots capable of sustaining large deformation while inducing little pressure or damage when maneuvering through confined spaces. The emergence of soft robotics offers the prospect of applying soft actuators as artificial muscles in robots, replacing traditional rigid actuators. Dielectric elastomer actuators (DEAs) are recognized as one of the most promising soft actuation technologies due to the facts that: i) dielectric elastomers are kind of soft, motion-generating materials that resemble natural muscle of humans in terms of force, strain (displacement per unit length or area) and actuation pressure/density; ii) dielectric elastomers can produce large voltage-induced deformation. In this survey, we first introduce the so-called DEAs emphasizing the key points of working principle, key components and electromechanical modeling approaches. Then, different DEA-driven soft robots, including wearable/humanoid robots, walking/serpentine robots, flying robots and swimming robots, are reviewed. Lastly, we summarize the challenges and opportunities for the further studies in terms of mechanism design, dynamics modeling and autonomous control.

Study of the Integration of LIDAR and Photogrammetric Datasets by in Situ Camera Calibration and Integrated Sensor Orientation

NASA Astrophysics Data System (ADS)

Mitishita, E.; Costa, F.; Martins, M.

2017-05-01

Photogrammetric and Lidar datasets should be in the same mapping or geodetic frame to be used simultaneously in an engineering project. Nowadays direct sensor orientation is a common procedure used in simultaneous photogrammetric and Lidar surveys. Although the direct sensor orientation technologies provide a high degree of automation process due to the GNSS/INS technologies, the accuracies of the results obtained from the photogrammetric and Lidar surveys are dependent on the quality of a group of parameters that models accurately the user conditions of the system at the moment the job is performed. This paper shows the study that was performed to verify the importance of the in situ camera calibration and Integrated Sensor Orientation without control points to increase the accuracies of the photogrammetric and LIDAR datasets integration. The horizontal and vertical accuracies of photogrammetric and Lidar datasets integration by photogrammetric procedure improved significantly when the Integrated Sensor Orientation (ISO) approach was performed using Interior Orientation Parameter (IOP) values estimated from the in situ camera calibration. The horizontal and vertical accuracies, estimated by the Root Mean Square Error (RMSE) of the 3D discrepancies from the Lidar check points, increased around of 37% and 198% respectively.

Shape Sensing Techniques for Continuum Robots in Minimally Invasive Surgery: A Survey.

PubMed

Shi, Chaoyang; Luo, Xiongbiao; Qi, Peng; Li, Tianliang; Song, Shuang; Najdovski, Zoran; Fukuda, Toshio; Ren, Hongliang

2017-08-01

Continuum robots provide inherent structural compliance with high dexterity to access the surgical target sites along tortuous anatomical paths under constrained environments and enable to perform complex and delicate operations through small incisions in minimally invasive surgery. These advantages enable their broad applications with minimal trauma and make challenging clinical procedures possible with miniaturized instrumentation and high curvilinear access capabilities. However, their inherent deformable designs make it difficult to realize 3-D intraoperative real-time shape sensing to accurately model their shape. Solutions to this limitation can lead themselves to further develop closely associated techniques of closed-loop control, path planning, human-robot interaction, and surgical manipulation safety concerns in minimally invasive surgery. Although extensive model-based research that relies on kinematics and mechanics has been performed, accurate shape sensing of continuum robots remains challenging, particularly in cases of unknown and dynamic payloads. This survey investigates the recent advances in alternative emerging techniques for 3-D shape sensing in this field and focuses on the following categories: fiber-optic-sensor-based, electromagnetic-tracking-based, and intraoperative imaging modality-based shape-reconstruction methods. The limitations of existing technologies and prospects of new technologies are also discussed.

Analysis of the acceptance of autonomous planetary science data collection by field of inquiry

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2015-06-01

The acceptance of autonomous control technologies in planetary science has met significant resistance. Many within this scientific community question the efficacy of autonomous technologies for making decisions regarding what data to collect, how to process it and its processing. These technologies, however, can be used to significantly increase the scientific return on mission investment by removing limitations imposed by communications bandwidth constraints and communications and human decision making delays. A fully autonomous mission, in an ideal case, could be deployed, perform most of the substantive work itself (possibly relying on human assistance for dealing with any unexpected or unexplained occurrences) and return an answer to a scientific question along with data selected to allow scientists to validate software performance. This paper presents the results of a survey of planetary scientists which attempts to identify the root causes of the impediments to the use of this type of technology and identify pathways to its acceptance. Previous work considered planetary science as a single large community. This paper contrasts the differences in acceptance between component fields of planetary science.

International Conference of Applied Science and Technology for Infrastructure Engineering

NASA Astrophysics Data System (ADS)

Elvina Santoso, Shelvy; Hardianto, Ekky

2017-11-01

Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

Evaluating the Effectiveness of the 1999-2000 NASA CONNECT Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Frank, Kari Lou

2002-01-01

NASA CONNECT is a standards-based, integrated mathematics, science, and technology series of 30-minute instructional distance learning (satellite and television) programs for students in grades 6-8. Each of the five programs in the 1999-2000 NASA CONNECT series included a lesson, an educator guide, a student activity or experiment, and a web-based component. In March 2000, a mail (self-reported) survey (booklet) was sent to a randomly selected sample of 1,000 NASA CONNECT registrants. A total of 336 surveys (269 usable) were received by the established cut-off date. Most survey questions employed a 5-point Likert-type response scale. Survey topics included (1) instructional technology and teaching, (2) instructional programming and technology in the classroom, (3) the NASA CONNECT program, (4) classroom use of computer technology, and (5) demographics. About 73% of the respondents were female, about 92% identified "classroom teacher" as their present professional duty, about 90% worked in a public school, and about 62% held a master's degree or master's equivalency. Regarding NASA CONNECT, respondents reported that (1) they used the five programs in the 1999-2000 NASA CONNECT series; (2) the stated objectives for each program were met (4.54); (3) the programs were aligned with the national mathematics, science, and technology standards (4.57); (4) program content was developmentally appropriate for grade level (4.17); and (5) the programs in the 1999-2000 NASA CONNECT series enhanced/enriched the teaching of mathematics, science, and technology (4.51).

Evaluating the Effectiveness of the 1998-1999 NASA CONNECT Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Frank, Kari Lou; House, Patricia L.

2000-01-01

NASA CONNECT is a standards-based, integrated mathematics, science, and technology series of 30-minute instructional distance learning (satellite and television) programs for students in grades 5-8. Each of the five programs in the 1998-1999 NASA CONNECT series included a lesson, an educator guide, a student activity or experiment, and a web-based component. In March 1999, a mail (self-reported) survey (booklet) was sent to a randomly selected sample of 1,000 NASA CONNECT registrants. A total of 401 surveys (351 usable) were received by the established cut-off date. Most survey questions employed a 5-point Likert-type response scale. Survey topics included: (1) instructional technology and teaching, (2) instructional programming and technology in the classroom, (3) the NASA CONNECT program, (4) classroom use of computer technology, and (5) demographics. About 68% of the respondents were female, about 88% identified "classroom teacher" as their present professional duty, about 75% worked in a public school, and about 67% held a master's degree or master's equivalency. Regarding NASA CONNECT, respondents reported that: (1) they used the five programs in the 1998-1999 NASA CONNECT series; (2) the stated objectives for each program were met (4.49); (3) the programs were aligned with the national mathematics, science, and technology standards (4.61); (4) program content was developmentally appropriate for grade level (4.25); and (5) the programs in the 1998-1999 NASA CONNECT series enhanced/enriched the teaching of mathematics, science, and technology (4.45).

The theory-practice gap of black carbon mitigation technologies in rural China

NASA Astrophysics Data System (ADS)

Zhang, Weishi; Li, Aitong; Xu, Yuan; Liu, Junfeng

2018-02-01

Black carbon mitigation has received increasing attention for its potential contribution to both climate change mitigation and air pollution control. Although different bottom-up models concerned with unit mitigation costs of various technologies allow the assessment of alternative policies for optimized cost-effectiveness, the lack of adequate data often forced many reluctant explicit and implicit assumptions that deviate away from actual situations of rural residential energy consumption in developing countries, where most black carbon emissions occur. To gauge the theory-practice gap in black carbon mitigation - the unit cost differences that lie between what is estimated in the theory and what is practically achieved on the ground - this study conducted an extensive field survey and analysis of nine mitigation technologies in rural China, covering both northern and southern regions with different residential energy consumption patterns. With a special focus on two temporal characteristics of those technologies - lifetimes and annual utilization rates, this study quantitatively measured the unit cost gaps and explain the technical as well as sociopolitical mechanisms behind. Structural and behavioral barriers, which have affected the technologies' performance, are discussed together with policy implications to narrow those gaps.

The potential for health-related uses of mobile phones and internet with homeless veterans: results from a multisite survey.

PubMed

McInnes, D Keith; Sawh, Leon; Petrakis, Beth Ann; Rao, Sowmya; Shimada, Stephanie L; Eyrich-Garg, Karin M; Gifford, Allen L; Anaya, Henry D; Smelson, David A

2014-09-01

Addressing the health needs of homeless veterans is a priority in the United States, and, although information technologies can potentially improve access to and engagement in care, little is known about this population's use of information technologies or their willingness to use technologies to communicate with healthcare providers and systems. This study fills this gap through a survey of homeless veterans' use of information technologies and their attitudes about using these technologies to assist with accessing needed healthcare services. Among the 106 homeless veterans surveyed, 89% had a mobile phone (one-third were smartphones), and 76% used the Internet. Among those with a mobile phone, 71% used text messaging. Nearly all respondents (93%) were interested in receiving mobile phone reminders (text message or phone call) about upcoming medical appointments, and a similar proportion (88%) wanted mobile phone outreach asking if they would like to schedule an appointment if they had not been seen by a health provider in over a year. In addition, respondents already used these technologies for information and communication related to health, housing, and jobs. These findings suggest new avenues for communication and health interventions for hard-to-reach homeless veterans.

2012 national survey on bicyclist and pedestrian attitudes and behavior : traffic tech : technology transfer series

DOT National Transportation Integrated Search

2013-09-01

In 2012, NHTSA conducted a national telephone survey to obtain a status report on attitudes, knowledge, and behavior related to outdoor walking and bicycling. This study updates national telephone survey data collected by NHTSA in 2002. The survey ad...

Solar Sail Propulsion: Enabling New Capabilities for Heliophysics

NASA Technical Reports Server (NTRS)

Johnson, L.; Young, R.; Alhorn, D.; Heaton, A.; Vansant, T.; Campbell, B.; Pappa, R.; Keats, W.; Liewer, P. C.; Alexander, D.;

Variation in use of technology among vascular access specialists: an analysis of the PICC1 survey.

PubMed

Chopra, Vineet; Kuhn, Latoya; Ratz, David; Winter, Suzanne; Carr, Peter J; Paje, David; Krein, Sarah L

2017-05-15

While the use of technologies such as ultrasound and electrocardiographic (ECG) guidance systems to place peripherally inserted central catheters (PICCs) has grown, little is known about the clinicians who use these tools or their work settings. Using data from a national survey of vascular access specialists, we identified technology users as PICC inserters that: (a) use ultrasound to find a suitable vein for catheter placement; (b) measure catheter-to-vein ratio; and (c) use ECG for PICC placement. Individual and organizational-level characteristics between technology users versus non-users were assessed. Bivariable comparisons were made using Chi-squared or Fisher's exact tests; two-sided alpha with p<0.05 was considered statistically significant. Of the 2762 PICC inserters who accessed the survey, 1518 (55%) provided information regarding technology use. Technology users reported greater experience than non-technology users, with a higher percentage stating they had placed >1000 PICCs (55% vs. 45%, p<0.001). A significantly greater percentage of technology users also reported being certified in vascular access by an external agency than non-technology users (75% vs. 63%, p<0.001). Technology users were more often part of vascular access teams with ≥10 members compared to non-technology users (35% vs. 22%, p<0.001). Some practices also varied between the two groups: for example, use of certain securement devices and dressings differed between technology users and non-users (p<0.001). Technology use by vascular access clinicians while placing PICCs is associated with clinician characteristics, work setting and practice factors. Understanding whether such differences influence clinical care or patient outcomes appears necessary.

Survey of student attitudes towards digital simulation technologies at a dental school in China.

PubMed

Ren, Q; Wang, Y; Zheng, Q; Ye, L; Zhou, X D; Zhang, L L

2017-08-01

Digital simulation technologies have become widespread in healthcare education, especially in dentistry; these technologies include digital X-ray images, digital microscopes, virtual pathology slides and other types of simulation. This study aimed to assess students' attitudes towards digital simulation technologies at a large, top-ranked dental school in China, as well as find out how students compare the digital technologies with traditional training methods. In April 2015, a custom-designed questionnaire was distributed to a total of 389 students who had received digital technology and simulation-based training in West China Dental School during 2012-2014. Results of a cross-sectional survey show that most students accept digital simulation technology; they report that the technology is stimulating and facilitates self-directed and self-paced learning. These findings, together with the objective advantages of digital technology, suggest that digital simulation training offers significant potential for dental education, highlighting the need for further research and more widespread implementation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Motor Control Training for the Shoulder with Smart Garments.

PubMed

Wang, Qi; De Baets, Liesbet; Timmermans, Annick; Chen, Wei; Giacolini, Luca; Matheve, Thomas; Markopoulos, Panos

2017-07-22

Wearable technologies for posture monitoring and posture correction are emerging as a way to support and enhance physical therapy treatment, e.g., for motor control training in neurological disorders or for treating musculoskeletal disorders, such as shoulder, neck, or lower back pain. Among the various technological options for posture monitoring, wearable systems offer potential advantages regarding mobility, use in different contexts and sustained tracking in daily life. We describe the design of a smart garment named Zishi to monitor compensatory movements and evaluate its applicability for shoulder motor control training in a clinical setting. Five physiotherapists and eight patients with musculoskeletal shoulder pain participated in the study. The attitudes of patients and therapists towards the system were measured using standardized survey instruments. The results indicate that patients and their therapists consider Zishi a credible aid for rehabilitation and patients expect it will help towards their recovery. The system was perceived as highly usable and patients were motivated to train with the system. Future research efforts on the improvement of the customization of feedback location and modality, and on the evaluation of Zishi as support for motor learning in shoulder patients, should be made.

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

PubMed

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Endoscopic and Keyhole Endoscope-assisted Neurosurgical Approaches: A Qualitative Survey on Technical Challenges and Technological Solutions

PubMed Central

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-01-01

Introduction The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. Materials and Methods All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent themes analysis. Results Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). Discussion The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Conclusions Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches. PMID:24533591

A compendium of solar dish/Stirling technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stine, W.B.; Diver, R.B.

1994-01-01

This report surveys the emerging dish/Stirling technology. It documents -- using consistent terminology the design characteristics of dish concentrators, receivers, and Stirling engines applicable to solar electric power generation. Development status and operating experience for each system and an overview of dish/Stirling technology are also presented. This report enables comparisons of concentrator, receiver, and engine technologies. Specifications and performance data are presented on systems and on components that are in use or that could be used in dish/Stirling systems. This report is organized into two parts: The first part (Chapters 1 through 4) provides an overview of dish/Stirling technology --more » the dish/ Stirling components (concentrator, receiver, and engine/alternator), current technology, basic theory, and technology development. The second part (Chapters 5 through 7) provides a detailed survey of the existing dish/Stirling concentrators, receivers, and engine/alternators.« less

Applied Physics Modules Selected for Architectural and Civil Drafting Technologies.

ERIC Educational Resources Information Center

Waring, Gene

Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of six learning modules is equivalent to the content of a three-credit hour class in surveying and drafting technology, architectural drafting technology, building construction technology, and civil engineering technology.…

KPI Student Satisfaction Survey, 2001. Executive Summary Report.

ERIC Educational Resources Information Center

Sheridan Coll. (Ontario).

The KPI (Key Performance Indicators) Student Satisfaction Survey is a paper-based survey distributed to all students in Ontario's Colleges of Applied Arts and Technology. The results of the Sheridan College survey for 2001 are presented in this report. The student population at Sheridan for the winter 2001 survey was 9,134. A total of 6,566…

A Survey of Telecommunications Technology. Part I. President's Task Force on Communications Policy. Staff Paper One, Part I.

ERIC Educational Resources Information Center

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy surveys the range of present and future innovations in communications techniques, assesses their feasibility and costs, and projects the rate and manner in which they will be deployed in the future. In general, the many technological possibilities--including…

A Survey of Exemplar Teachers' Perceptions, Use, and Access of Computer-Based Games and Technology for Classroom Instruction

ERIC Educational Resources Information Center

Proctor, Michael D.; Marks, Yaela

2013-01-01

This research reports and analyzes for archival purposes surveyed perceptions, use, and access by 259 United States based exemplar Primary and Secondary educators of computer-based games and technology for classroom instruction. Participating respondents were considered exemplary as they each won the Milken Educator Award during the 1996-2009…