Angular color uniformity enhancement of white light-emitting diodes integrated with freeform lenses.

PubMed

Wang, Kai; Wu, Dan; Chen, Fei; Liu, Zongyuan; Luo, Xiaobing; Liu, Sheng

2010-06-01

We demonstrate a freeform lens to enhance the angular color uniformity (ACU) of white light-emitting diodes (LEDs) whose phosphor layers were coated by freely dispersed coating processes. Monte Carlo ray tracing simulation results indicated that the ACU of the modified LED integrated with the freeform lens significantly increased from 0.334 to 0.957, compared with the traditional LED. Enhancement of ACU reached as high as 186.5%. Moreover, the ACU of the modified LED was not only at a high level, but also stable when the shape of the phosphor layer changed. The freeform lens provided an effective way to achieve white LEDs with high ACU at low cost.

Regional Variation in Antenatal Corticosteroid Use: A Network-Level Quality Improvement Study

PubMed Central

Goldstein, B.A.; Tamaresis, J.; Kan, P.; Lee, H.C.

2015-01-01

BACKGROUND AND OBJECTIVES: Examination of regional care patterns in antenatal corticosteroid use (ACU) rates may be salient for the development of targeted interventions. Our objective was to assess network-level variation using California perinatal care regions as a proxy. We hypothesized that (1) significant variation in ACU exists within and between California perinatal care regions, and (2) lower performing regions exhibit greater NICU-level variability in ACU than higher performing regions. METHODS: We undertook cross-sectional analysis of 33 610 very low birth weight infants cared for at 120 hospitals in 11 California perinatal care regions from 2005 to 2011. We computed risk-adjusted median ACU rates and interquartile ranges (IQR) for each perinatal care region. The degree of variation was assessed using hierarchical multivariate regression analysis with NICU as a random effect and region as a fixed effect. RESULTS: From 2005 to 2011, mean ACU rates across California increased from 82% to 87.9%. Regional median (IQR) ACU rates ranged from 68.4% (24.3) to 92.9% (4.8). We found significant variation in ACU rates among regions (P < .0001). Compared with Level IV NICUs, care in a lower level of care was a strongly significant predictor of lower odds of receiving antenatal corticosteroids in a multilevel model (Level III, 0.65 [0.45–0.95]; Level II, 0.39 [0.24–0.64]; P < .001). Regions with lower performance in ACU exhibited greater variability in performance. CONCLUSIONS: We found significant variation in ACU rates among California perinatal regions. Regional quality improvement approaches may offer a new avenue to spread best practice. PMID:25601974

Primary acquired cold urticaria.

PubMed

Lee, Chyh-Woei; Sheffer, Albert L

2003-01-01

Primary acquired cold urticaria (ACU) is the most common type of cold urticaria characterized by rapid onset of pruritic hives, swelling, and possible severe systemic reactions including hypotension and shock after cold exposure. Primary ACU is diagnosed by history of such symptoms, a positive immediate cold-contact stimulation test, and negative laboratory evaluation for underlying systemic disorders. Clinicians should be aware that patients with ACU may be susceptible to life-threatening systemic reactions especially during aquatic activities and that proper patient education is extremely important. This article reviews the clinical presentation, pathogenesis, diagnosis, and management of primary ACU.

Hydraulic properties and scale effects investigation in regional rock aquifers, south-western Quebec, Canada

NASA Astrophysics Data System (ADS)

Nastev, M.; Savard, M. M.; Lapcevic, P.; Lefebvre, R.; Martel, R.

This paper reports on the characterization of hydraulic properties of regional rock aquifers carried out within a groundwater resources assessment project in the St. Lawrence Lowlands of south-western Quebec. To understand the aquifer behavior at both the fracture level and at field scale, hydraulic investigations were carried out using various aquifer tests. The groundwater flow at the local scale is controlled mostly by the fracture system. Results of the constant-head injection tests show a weak decreasing trend of hydraulic conductivity with depth indicating that a major part of the groundwater flow occurs in the first meters of the rock sequence. At the regional scale, the equivalent porous media approach is applicable. The hydraulic conductivity measurements were correlated to the scale of the aquifer tests expressed with the investigated aquifer volume. A simple interpolation procedure for the hydraulic conductivity field was developed based on the distance between field measurements and the tested aquifer volumes. The regional distribution of the hydraulic conductivity for the major fractured aquifer units indicates that dolostone is the most permeable whereas sandstone and crystalline rocks are the least permeable units. Este artículo trata de la caracterización de las propiedades hidráulicas en acuíferos regionales rocosos, la cual se llevó a cabo dentro del proyecto de evaluación de los recursos de agua subterránea en St. Lawrence Lowlands al suroeste de Quebec. Para entender el comportamiento del acuífero tanto a nivel de fractura como a escala del campo, se ejecutaron investigaciones hidráulicas usando varias pruebas de acuífero. El flujo del agua subterránea a escala local está controlado principalmente por el sistema de fracturas. Los resultados de las pruebas de inyección con cabeza constante muestran una tendencia decreciente débil de la conductividad hidráulica con la profundidad, indicando que la mayor parte del flujo de agua subterránea sucede en los primeros metros de la secuencia rocosa. A escala regional se puede aplicar la aproximación equivalente de medios porosos. Las medidas de la conductividad hidrálica fueron comparadas con la escala de las pruebas del acuífero, expresadas con el volumen investigado del acuífero. Se desarrolló un proceso de interpolación simple para la conductividad hidráulica de campo, con base en la distancia entre las medidas de campo y los volúmenes probados del acuífero. La distribución regional de la conductividad hidráulica, para las unidades acuíferas fracturadas mayores, indica que la dolomita es más permeable mientras que la arenisca y las rocas cristalinas son las unidades menos permeables. L'article présente les propriétés hydrauliques d'un aquifère régional rocheux qui ont été mesurées dans le cadre d'un projet concernant l'estimation de la ressource en eau de la plaine de St. Lawrence située dans la partie sud-ouest de Quebec. Affin de comprendre le comportement de l'aquifère tant à l'échelle de fracture qu'à l'échelle régionale on a mené des investigations hydrauliques en utilisant des essais differents. À l'échelle locale l'écoulement est déterminé en principal par le système des fractures. Les résultats des essais d'injection au niveau constant ont montré une tendence de décroissance de la conductivité hydraulique avec la profondeur ce qui indique que l'écoulement ait lieu en principal dans les premiers mètres de la structure rocheuse. À l'échelle règionale on peut appliquer l'approche de milieux poreux equivalent. Les mesures de conductivité hydraulique ont été corrélées avec l'échelle des essais de pompage exprimée en termes de volume investigué de l'aquifère. On a mis au point une méthode simple d'interpolation pour le champ de la conductivité hydraulique basée sur la distance entre les essais in situ et les volume investigués de l'aquifère. La distribution règionale de la conductivité hydraulique montre que pour la majorité des unités de roche fracturé les plus perméable sont les roches dolomitiques alors que les grés et les roches cristalines presentent la plus faible perméabilité.

Acetyl coenzyme A synthetase is acetylated on multiple lysine residues by a protein acetyltransferase with a single Gcn5-type N-acetyltransferase (GNAT) domain in Saccharopolyspora erythraea.

PubMed

You, Di; Yao, Li-Li; Huang, Dan; Escalante-Semerena, Jorge C; Ye, Bang-Ce

2014-09-01

Reversible lysine acetylation (RLA) is used by cells of all domains of life to modulate protein function. To date, bacterial acetylation/deacetylation systems have been studied in a few bacteria (e.g., Salmonella enterica, Bacillus subtilis, Escherichia coli, Erwinia amylovora, Mycobacterium tuberculosis, and Geobacillus kaustophilus), but little is known about RLA in antibiotic-producing actinomycetes. Here, we identify the Gcn5-like protein acetyltransferase AcuA of Saccharopolyspora erythraea (SacAcuA, SACE_5148) as the enzyme responsible for the acetylation of the AMP-forming acetyl coenzyme A synthetase (SacAcsA, SACE_2375). Acetylated SacAcsA was deacetylated by a sirtuin-type NAD(+)-dependent consuming deacetylase (SacSrtN, SACE_3798). In vitro acetylation/deacetylation of SacAcsA enzyme was studied by Western blotting, and acetylation of lysine residues Lys(237), Lys(380), Lys(611), and Lys(628) was confirmed by mass spectrometry. In a strain devoid of SacAcuA, none of the above-mentioned Lys residues of SacAcsA was acetylated. To our knowledge, the ability of SacAcuA to acetylate multiple Lys residues is unique among AcuA-type acetyltransferases. Results from site-specific mutagenesis experiments showed that the activity of SacAcsA was controlled by lysine acetylation. Lastly, immunoprecipitation data showed that in vivo acetylation of SacAcsA was influenced by glucose and acetate availability. These results suggested that reversible acetylation may also be a conserved regulatory posttranslational modification strategy in antibiotic-producing actinomycetes. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Rapid exclusion of the diagnosis of immune HIT by AcuStar HIT and heparin-induced multiple electrode aggregometry.

PubMed

Minet, V; Baudar, J; Bailly, N; Douxfils, J; Laloy, J; Lessire, S; Gourdin, M; Devalet, B; Chatelain, B; Dogné, J M; Mullier, F

2014-06-01

Accurate diagnosis of heparin-induced thrombocytopenia (HIT) is essential but remains challenging. We have previously demonstrated, in a retrospective study, the usefulness of the combination of the 4Ts score, AcuStar HIT and heparin-induced multiple electrode aggregometry (HIMEA) with optimized thresholds. We aimed at exploring prospectively the performances of our optimized diagnostic algorithm on suspected HIT patients. The secondary objective is to evaluate performances of AcuStar HIT-Ab (PF4-H) in comparison with the clinical outcome. 116 inpatients with clinically suspected immune HIT were included. Our optimized diagnostic algorithm was applied to each patient. Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV) of the overall diagnostic strategy as well as AcuStar HIT-Ab (at manufacturer's thresholds and at our thresholds) were calculated using clinical diagnosis as the reference. Among 116 patients, 2 patients had clinically-diagnosed HIT. These 2 patients were positive on AcuStar HIT-Ab, AcuStar HIT-IgG and HIMEA. Using our optimized algorithm, all patients were correctly diagnosed. AcuStar HIT-Ab at our cut-off (>9.41 U/mL) and at manufacturer's cut-off (>1.00 U/mL) showed both a sensitivity of 100.0% and a specificity of 99.1% and 90.4%, respectively. The combination of the 4Ts score, the HemosIL® AcuStar HIT and HIMEA with optimized thresholds may be useful for the rapid and accurate exclusion of the diagnosis of immune HIT. Copyright © 2014 Elsevier Ltd. All rights reserved.

Teaching and Student Success: ACUE Makes the Link

ERIC Educational Resources Information Center

Mangum, Elmira

2017-01-01

In late 2014, higher education leaders and experts in pedagogy were convened by the Association of College and University Educators (ACUE) to develop a scalable and comprehensive program on the essentials of college teaching. The result is ACUE's Course in Effective Teaching Practices in which faculty learn about and implement evidence-based…

Rapid immunoassays for diagnosis of heparin-induced thrombocytopenia: Comparison of diagnostic accuracy, reproducibility, and costs in clinical practice

PubMed Central

Bankova, Andriyana; Andres, Yvonne; Horn, Michael P.; Alberio, Lorenzo

2017-01-01

Background Immunoassays are crucial in the work-up of patients with suspected heparin-induced thrombocytopenia (HIT) and rapid tests have been recently developed. However, comparative data on diagnostic accuracy, reproducibility, and analytical costs of different immunoassays in clinical practice are limited. Methods Samples of 179 consecutive patients evaluated for suspected HIT in clinical practice using a polyspecific enzyme-linked immunoabsorbent assay (GTI diagnostics; ELISA) and a rapid particle gel immunoassay (PaGIA), were additionally analysed with a IgG-specific chemiluminescent immunoassay (AcuStar HIT-IgG). Presence of HIT was defined as a positive functional heparin-induced platelet aggregation test. Diagnostic accuracy was determined for low, intermediate and high thresholds as previously established (ELISA: optical density 0.4, 1.3, and 2.0 respectively; PaGIA: positive/negative, titre of 4, titre of 32; AcuStar HIT-IgG: 1.0 U/ml, 2.8, 9.4) and reproducibility was assessed by repeated measurements. Costs of test determination were calculated taking reagents, controls, and working time of technicians according to Swiss health care system into account. Results Data on PaGIA results were available for 171 patients (95.5%), ELISA for 144 patients (80.4%), and AcuStar HIT-IgG for 179 patients (100%). Sensitivity was above 95% for all assays at low and intermediate thresholds. Specificity increased with higher thresholds and was above 90% for all assays with intermediate and high thresholds. Specificity of AcuStar HIT-IgG (92.8%; 95% CI 87.7, 96.2) was significantly higher than PaGIA (83.0%; 95% CI 76.3, 88.5) and higher than ELISA (81.8%, 95% CI 74.2, 88.0) at low threshold (p<0.05). Reproducibility was adequate for all assays. Total costs per test were CHF 51.02 for ELISA, 117.70 for AcuStar HIT-IgG, and 83.13 for PaGIA. Conclusions We observed favourable diagnostic accuracy measures and a high reproducibility for PaGIA and AcuStar HIT-IgG. Implementation into 24-hours-service might improve patient care but the results must be confirmed in other settings and larger populations as well. PMID:28594835

Augmentation effect of acupuncture on Bi'nao for hypophasis in patients with Bell's palsy: study protocol for a randomized controlled trial.

PubMed

Li, Xiaoyan; Chen, Chunlan; Zhao, Chuang; Li, Zunyuan; Liang, Wei; Liu, Zhidan

2018-06-11

Hypophasis is one of the most frequently observed sequelae of patients with Bell's palsy, who have not recovered completely, creating a clinical difficulty for physicians. Acupuncture therapy has been widely used to treat Bell's palsy as a reasonable resolution for management of symptoms such as hypophasis. The number of acupuncture points (acu-points) is frequently selected in the approach of acupuncture therapy; however, whether these had high efficiency has not been proved. According to the literature review, Bi'nao was useful for treating eye and eye lipid diseases, which could be proved only by some successful cases. Thus, a randomized controlled trial was designed to evaluate the efficiency of the acu-point Bi'nao. Participants with hypophasis as the major symptom are selected among patients with Bell's palsy and randomly allocated into one of the three groups at a 1:1:1 allocation ratio. All participants receive conventional acupuncture therapy; however, those assigned to the real acupuncture group will be given added acupuncture therapy on the acu-point Bi'nao, while those assigned to the sham acupuncture group were given extra acupuncture therapy on the sham Bi'nao as a placebo. The efficacy of the acupuncture therapy on the acu-point Bi'nao for hypophasis will be evaluated by Eye Crack Width Measurement (ECWM) and Eyelid Strength Assessment (ESA) before and after therapy. This is the first study assessing the safety and efficiency of Bi'nao in treating the hypophasis of patients with Bell's palsy that might support the application of this acupuncture therapy. However, evaluating hypophasis is challenging, and, thus, ECWM and ESA were applied to measure the eyelid movement. Chinese Clinical Trials Registry, ChiCTR-INR-17012955 . Registered on 12 October 2017.

Geostatistical interpolation of available copper in orchard soil as influenced by planting duration.

PubMed

Fu, Chuancheng; Zhang, Haibo; Tu, Chen; Li, Lianzhen; Luo, Yongming

2018-01-01

Mapping the spatial distribution of available copper (A-Cu) in orchard soils is important in agriculture and environmental management. However, data on the distribution of A-Cu in orchard soils is usually highly variable and severely skewed due to the continuous input of fungicides. In this study, ordinary kriging combined with planting duration (OK_PD) is proposed as a method for improving the interpolation of soil A-Cu. Four normal distribution transformation methods, namely, the Box-Cox, Johnson, rank order, and normal score methods, were utilized prior to interpolation. A total of 317 soil samples were collected in the orchards of the Northeast Jiaodong Peninsula. Moreover, 1472 orchards were investigated to obtain a map of planting duration using Voronoi tessellations. The soil A-Cu content ranged from 0.09 to 106.05 with a mean of 18.10 mg kg -1 , reflecting the high availability of Cu in the soils. Soil A-Cu concentrations exhibited a moderate spatial dependency and increased significantly with increasing planting duration. All the normal transformation methods successfully decreased the skewness and kurtosis of the soil A-Cu and the associated residuals, and also computed more robust variograms. OK_PD could generate better spatial prediction accuracy than ordinary kriging (OK) for all transformation methods tested, and it also provided a more detailed map of soil A-Cu. Normal score transformation produced satisfactory accuracy and showed an advantage in ameliorating smoothing effect derived from the interpolation methods. Thus, normal score transformation prior to kriging combined with planting duration (NSOK_PD) is recommended for the interpolation of soil A-Cu in this area.

M.U.S.T. 2007 Summer Research Project at NASA's KSC MILA Facility

NASA Technical Reports Server (NTRS)

PintoRey, Christian R.

2007-01-01

The summer research activity at Kennedy Space Center (KSC) aims to introduce the student to the basic principles in their field of study. While at KSC, a specific research project awaits the student to complete. As an Aeronautical Engineering student, my assigned project is to assist the cognizant engineer, Mr. Troy Hamilton, in the six engineering phases for replacing the Ponce De Leon (PDL)4.3M Antenna Control Unit (ACU). Although the project mainly requires the attention of two engineers and two students, it also involves the participation of many colleagues at various points during the course of the engineering change (EC). Since the PDL 4.3M ACU engineering change makes both hardware and software changes, it calls upon the expertise of a Hardware Engineer as well as a Software Engineer. As students, Mr. Jeremy Bresette and I have worked side by side with the engineers, gaining invaluable experience. We work in two teams, the hardware team and the software team, On certain tasks, we assist the engineers, while on others we assume their roles. By diligently working in this fashion, we are learning how to communicate effectively as professionals, despite the fact that we are studying different engineering fields. This project has been a great fit for my field of study, as it has highly improved my awareness of the many critical tasks involved in carrying out an engineering project.

Hairline fractures following volar plating of the distal radius: a recently recognized hardware-related complication.

PubMed

Otremski, Hila; Dolkart, Oleg; Atlan, Franck; Hutt, Dan; Segev, Elad; Pritsch, Tamir; Rosenblatt, Yishai

2018-06-01

Intraoperative hairline longitudinal fractures were recently reported in association with distal radius volar plating. Our aim was to further analyze this newly described complication. A retrospective radiographic and chart review was performed on 225 patients who underwent distal radius plating between June 2013 and June 2015. The Acu-Loc/Acu-Loc2© plating system (Acumed, Hillsboro, OR, USA) was used in 208 cases, and the VariAx© plating system (Stryker, Kalamazoo, MI, USA) was used in 17 cases. Three independent reviewers performed a blind evaluation of all relevant radiographs for the occurrence of longitudinal fractures around the plate, and validity was considered only when there was agreement among all three of them. Hairline longitudinal fractures were identified in 57 cases (25%), 55 with the Acu-Loc/Acu-Loc2© system and 2 with the VariAx© system. All fractures occurred with volar plating. Fracture occurrence was associated with age over 59 years, female gender, extra-articular fractures, and the use of Hexalobe screws (Acu-Loc/Acu-Loc2© system). We believe that the source of fracture occurrence lies within the screw design and that better screw design and possibly tapping in patients at risk may reduce the occurrence of intraoperative hairline longitudinal fractures. Further clinical and biomechanical research is needed to better understand this newly reported complication.

Electroacupuncture for postoperative pain and gastrointestinal motility after laparoscopic appendectomy (AcuLap): study protocol for a randomized controlled trial.

PubMed

Kim, Gangmi

2015-10-14

Acupuncture is a widely serviced complementary medicine. Although acupuncture is suggested for managing postoperative ileus and pain, supporting evidence is weak. The AcuLap trial is designed to provide high-level evidence regarding whether or not electroacupuncture is effective in promoting gastrointestinal motility and controlling pain after laparoscopic surgery. This study is a prospective randomized controlled trial with a three-arm, parallel-group structure evaluating the efficacy of electroacupuncture for gastrointestinal motility and postoperative pain after laparoscopic appendectomy. Patients with appendicitis undergoing laparoscopic surgery are included and randomized into three groups: 1) electroacupuncture group, 2) sham acupuncture group, and 3) control group. Patients receive 1) acupuncture with electrostimulation or 2) fake electroacupuncture with sham device twice a day or 3) no acupuncture after laparoscopic appendectomy. The primary outcome is time to first passing flatus after operation. Secondary outcomes include postoperative pain, analgesics, nausea/vomiting, bowel motility, time to tolerable diet, complications, hospital stay, readmission rates, time to recovery, quality of life, medical costs, and protocol failure rate. Patients and hospital staff (physicians and nurses) are blinded to which group the patient is assigned, electroacupuncture or sham acupuncture. Data analysis personnel are blinded to group assignment among all three groups. Estimated sample size to detect a minimum difference of time to first flatus with 80 % power, 5 % significance, and 10 % drop rate is 29 × 3 groups = 87 patients. Analysis will be performed according to the intention-to-treat principle. The AcuLap trial will provide evidence on the merits and/or demerits of electroacupuncture for bowel motility recovery and pain relief after laparoscopic appendectomy. The trial was registered in Clinical Research Information Service (CRiS), Republic of Korea ( KCT0001486 ) on 14 May 2015.

A-site Ordered Chromium Perovskites, ACu3Cr4O12 with A = Trivalent Ions

NASA Astrophysics Data System (ADS)

Sugiyama, Jun; Nozaki, Hiroshi; Umegaki, Izumi; Higemoto, Wataru; Isobe, Masahiko; Takagi, Hidenori; Sakurai, Hiroya; Ansaldo, Eduardo J.; Brewer, Jess H.; Sassa, Yasmine; Forslund, Ola Kenji; Månsson, Martin

The magnetic ground state of the A-site ordered chromium perovskites, ACu3Cr4O12 with A = Y, La, Eu, and Lu has been investigated with μ+SR using powder samples prepared by a high-pressure technique. Weak transverse field measurements revealed that the four compounds enter into a magnetic phase below 230-260 K. Moreover, the transition temperature (TN) was found to decrease with increasing the size of A3+ ions. Zero field measurements indicated the formation of static antiferromagnetic (AF) order in ACu3Cr4O12 below TN. Furthermore, since the internal magnetic field in the AF phase is independent of A, the role of 4f electrons on the AF state is very limited and/or eventually absence in ACu3Cr4O12.

Screening of Metagenomic and Genomic Libraries Reveals Three Classes of Bacterial Enzymes That Overcome the Toxicity of Acrylate

PubMed Central

Curson, Andrew R. J.; Burns, Oliver J.; Voget, Sonja; Daniel, Rolf; Todd, Jonathan D.; McInnis, Kathryn; Wexler, Margaret; Johnston, Andrew W. B.

2014-01-01

Acrylate is produced in significant quantities through the microbial cleavage of the highly abundant marine osmoprotectant dimethylsulfoniopropionate, an important process in the marine sulfur cycle. Acrylate can inhibit bacterial growth, likely through its conversion to the highly toxic molecule acrylyl-CoA. Previous work identified an acrylyl-CoA reductase, encoded by the gene acuI, as being important for conferring on bacteria the ability to grow in the presence of acrylate. However, some bacteria lack acuI, and, conversely, many bacteria that may not encounter acrylate in their regular environments do contain this gene. We therefore sought to identify new genes that might confer tolerance to acrylate. To do this, we used functional screening of metagenomic and genomic libraries to identify novel genes that corrected an E. coli mutant that was defective in acuI, and was therefore hyper-sensitive to acrylate. The metagenomic libraries yielded two types of genes that overcame this toxicity. The majority encoded enzymes resembling AcuI, but with significant sequence divergence among each other and previously ratified AcuI enzymes. One other metagenomic gene, arkA, had very close relatives in Bacillus and related bacteria, and is predicted to encode an enoyl-acyl carrier protein reductase, in the same family as FabK, which catalyses the final step in fatty-acid biosynthesis in some pathogenic Firmicute bacteria. A genomic library of Novosphingobium, a metabolically versatile alphaproteobacterium that lacks both acuI and arkA, yielded vutD and vutE, two genes that, together, conferred acrylate resistance. These encode sequential steps in the oxidative catabolism of valine in a pathway in which, significantly, methacrylyl-CoA is a toxic intermediate. These findings expand the range of bacteria for which the acuI gene encodes a functional acrylyl-CoA reductase, and also identify novel enzymes that can similarly function in conferring acrylate resistance, likely, again, through the removal of the toxic product acrylyl-CoA. PMID:24848004

[Research on basic questions of intellectual property rights of acupuncture and moxibustion].

PubMed

Dong, Guo-Feng; Wu, Xiao-Dong; Han, Yan-Jing; Meng, Hong; Wang, Xin

2011-12-01

Along with the modernization and internationalization of acupuncture-moxibustion (acu-moxibustion), the issue of intellectual property rights has been becoming prominent and remarkable increasingly. In the present paper, the authors explain the basic issues of acu-moxibustion learning from the concept, scope, subject, object, contents and acquisition way of intellectual property rights. To make clear these questions will help us inherit and carry forward the existing civilization achievements of acu-moxibustion, and unceasingly bring forth new ideas and further improvement in clinical application, so as to serve the people's health in a better way.

Profile of Instrumentation Laboratory's HemosIL® AcuStar HIT-Ab(PF4-H) assay for diagnosis of heparin-induced thrombocytopenia.

PubMed

Nagler, Michael; Cuker, Adam

2017-05-01

Immunoassays play an essential role in the diagnosis of heparin-induced thrombocytopenia (HIT). The objective of this article is to review HemosIL® AcuStar HIT-Ab(PF4-H) (Instrumentation Laboratory, Bedford, MA, USA), a new chemiluminescent immunoassay for HIT. Areas covered: The authors searched the published literature for evaluation studies of HemosIL® AcuStar HIT-Ab(PF4-H) and sought information from the manufacturer. In this paper, the authors discuss the analytical principle and technical aspects of the assay; describe its diagnostic performance in validation studies; report on its reproducibility, cost-effectiveness, and regulatory status; and discuss the implications of the assay on clinical practice and means of integrating it in diagnostic pathways. HemosIL® AcuStar HIT-Ab(PF4-H) is compared with other rapid assays and widely used enzyme-linked immunoassays for the diagnosis of HIT. Expert commentary: HemosIL® AcuStar HIT-Ab(PF4-H) is automatable, can be performed 24 h per day, offers a rapid turnaround time, and appears to have favorable diagnostic accuracy, particularly at thresholds above that listed in the label. These advantages could lead to improved patient outcomes through rapid provision of results at the point of care, enhancing the accuracy of initial diagnosis.

Evaluation of two new automated chemiluminescent assays (HemosIL® AcuStar HIT-IgG and HemosIL® AcuStar HIT-Ab) for the detection of heparin-induced antibodies in the diagnosis of heparin-induced thrombocytopenia.

PubMed

Van Hoecke, F; Devreese, K

2012-08-01

Recently, two new, fully automated quantitative chemiluminescent immunoassays, the HemosIL(®) AcuStar HIT-IgG (PF4-H), specific for IgG anti-PF4/H antibodies, and the HemosIL(®) AcuStar HIT-Ab(PF4-H), detecting IgG, IgM and IgA anti-PF4/H antibodies, were introduced into the market. In this study, their performance was compared mutually and with the Zymutest HIA IgG and HIA IgGAM ELISA. Citrated plasmas from 87 patients with clinical suspicion of heparin-induced thrombocytopenia (HIT) were analyzed with all four assays and with a functional confirmation assay. Apart from the manufacturer's cutoffs, optimalized cutoffs were evaluated as well. Sensitivities of all assays were 100%. The Acustar HIT-IgG assay showed a higher specificity compared with the HIT-Ab assay (85%vs. 73%), using the manufacturer's cutoffs. Specificities of all assays, except for the AcuStar HIT-IgG, could be significantly improved when altering the cutoff. Titers were significantly higher for the HIT-Ab assay compared with the HIT-IgG assay (P = 0.0001). This was also the case for the patients with confirmed HIT (P = 0.0495), indicating that the one cutoff (1.0 OD) for both Acustar assays, as proposed by the manufacturer, can be adapted for the AcuStar Hit-Ab assay resulting in an increased specificity. Performance characteristics of the Acustar HIT-IgG and HIT-Ab assay are comparable to the Zymutest HIA IgG and HIA IgGAM. © 2012 Blackwell Publishing Ltd.

The Effectiveness of Acupuncture for Chronic Daily Headache: An Outcomes Study

DTIC Science & Technology

2009-12-01

1107 -t- 3 chan- nel transcutaneous electrical nerve stimulator ( TENS ) units. The negative or black lead was clipped onto the needle in.serted at...arc easily accessible for electrical tonification, especially for acupuncture naive subjects. They can also be used during an acute headache episode...ache, warmth, tingling, pressure, or radiation). Mild electrical tonification was applied to the 2 acu- puncture needles in tbe foot, using an ITO-IC

Kinetic modelling and optimisation of antimicrobial compound production by Candida pyralidae KU736785 for control of Candida guilliermondii.

PubMed

Mewa-Ngongang, Maxwell; du Plessis, Heinrich W; Hutchinson, Ucrecia F; Mekuto, Lukhanyo; Ntwampe, Seteno Ko

2017-06-01

Biological antimicrobial compounds from yeast can be used to address the critical need for safer preservatives in food, fruit and beverages. The inhibition of Candida guilliermondii, a common fermented beverage spoilage organism, was achieved using antimicrobial compounds produced by Candida pyralidae KU736785. The antimicrobial production system was modelled and optimised using response surface methodology, with 22.5 ℃ and pH of 5.0 being the optimum conditions. A new concept for quantifying spoilage organism inhibition was developed. The inhibition activity of the antimicrobial compounds was observed to be at a maximum after 17-23 h of fermentation, with C. pyralidae concentration being between 0.40 and 1.25 × 10 9 CFU ml -1 , while its maximum specific growth rate was 0.31-0.54 h -1 . The maximum inhibitory activity was between 0.19 and 1.08 l contaminated solidified media per millilitre of antimicrobial compound used. Furthermore, the antimicrobial compound formation rate was 0.037-0.086 l VZI ml -1 ACU h -1 , respectively. The response surface methodology analysis showed that the model developed sufficiently described the antimicrobial compound formation rate 1.08 l VZI ml -1 ACU, as 1.17 l VZI ml -1 ACU, predicted under the optimum production conditions.

Transesophageal echocardiography in critically ill acute postoperative infants: comparison of AcuNav intracardiac echocardiographic and microTEE miniaturized transducers.

PubMed

Ferns, Sunita; Komarlu, Rukmini; Van Bergen, Andrew; Multani, Kanwar; Cui, Vivian Wei; Roberson, David A

2012-08-01

Multiple barriers to transthoracic echocardiography are present in critically ill infants immediately after surgery. Transesophageal echocardiography (TEE) is sometimes needed to obtain specific important information that transthoracic echocardiography fails to demonstrate. Formerly, the investigators used the AcuNav intracardiac echocardiographic (ICE) intravascular ultrasound transducer (8 Fr, 2.5 mm, 64-element crystal array, multifrequency [5.5-10 MHz], single longitudinal plane, linear phased array [Siemens Medical Solutions USA, Inc., Mountain View, CA]). Recently, the investigators have also used the microTEE transducer (8-mm transducer tip, 5.2-mm shaft, multifrequency [3-8 MHz], multiplane phased array, 32-element probe [Philips Medical Systems, Andover, MA]). Both transducers have two-dimensional, M-mode, color Doppler, and pulsed-wave and continuous-wave Doppler capabilities. The aim of this study was to compare the efficacy, safety, ease of insertion, capabilities, utilization, and cost of the AcuNav ICE transducer versus those of the microTEE transducer. A retrospective review of all 50 postoperative critically ill infants who underwent TEE using the AcuNav and microTEE in the past 5 years was conducted. TEE was performed as ordered by the attending physician to answer a specific question not answered by transthoracic echocardiography. In all cases, the clinical information sought was obtained. The AcuNav ICE transducer was safe, easy to insert through the transnasal route, and did not require paralysis; however, it had a limited number of echocardiographic views and had greater sterilization cost. The microTEE transducer had greater echocardiographic capabilities and lower sterilization cost; however, it was slightly more difficult to insert, had a few manageable complications, and required more sedation and paralysis. TEE in this setting has increased because of demonstrated efficacy and safety. Both the AcuNav ICE and microTEE transducers are useful and effective in this critical clinical scenario. Copyright © 2012 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.

Enchanced interference cancellation and telemetry reception in multipath environments with a single paraboic dish antenna using a focal plane array

NASA Technical Reports Server (NTRS)

Vilnrotter, Victor A. (Inventor); Mukai, Ryan (Inventor)

2011-01-01

An Advanced Focal Plane Array ("AFPA") for parabolic dish antennas that exploits spatial diversity to achieve better channel equalization performance in the presence of multipath (better than temporal equalization alone), and which is capable of receiving from two or more sources within a field-of-view in the presence of multipath. The AFPA uses a focal plane array of receiving elements plus a spatio-temporal filter that keeps information on the adaptive FIR filter weights, relative amplitudes and phases of the incoming signals, and which employs an Interference Cancelling Constant Modulus Algorithm (IC-CMA) that resolves multiple telemetry streams simultaneously from the respective aero-nautical platforms. This data is sent to an angle estimator to calculate the target's angular position, and then on to Kalman filters FOR smoothing and time series prediction. The resulting velocity and acceleration estimates from the time series data are sent to an antenna control unit (ACU) to be used for pointing control.

Haystack Antenna Control System Design Document

DTIC Science & Technology

2010-12-07

The ICDs will be referenced, where appropriate. The control system isn’t being designed in a vacuum . Other teams are designing or will be designing...a horizontally scrolling display which updates in real time based upon instrumentation status messages from the ACU. In the above figure a rather...hydrostatic bearing pump systems are shut down. 6.8 ELEVATION STOW PINS The stow pins will be monitored and controlled via the PLC. There will be 2 or 4

[Differences of bi-directional regulative effects between acu-moxibustion and Chinese materia medica interventions].

PubMed

Cao, Xin; Yu, Zhi; Xu, Bin

2012-10-01

Bi-directional regulation is referred to a balancing effect of both acu-moxibustion and Chinese materia medica interventions when the human body is experiencing a hyperactivity or hypoactivity due to abnormal intrinsic or external factors. In the present paper, the authors analyze their identical and different characteristics from: 1) definition; 2) characters of regulative effects of acu-moxibustion therapy: A) differentiation of meridian and zangfu-organs being the basis of treatment, B) four factors (acupoint-location, body's functional state, acupoint-formula and needle-manipulation techniques) dependant, C) entirety regulation, and D) centrotaxis modulation; 3) characters of Chinese materia medica intervention: including a) correspondence between the drug property and the syndrome being the basis of the regulative effect, b) multi-factors [components (antagonist and agonist), combination, dosages and processing quality of Chinese materia medica, and functional state of the human body] dependant, c) entirety regulation, and d) both centrotaxis and deviation adjustment. In one word, the bi-directional regulation effect is one of the basic characteristics of both acu-moxibustion and Chinese materia medica in clinical practice, but their basis and modes for inducing effects are different.

Groundwater demand management at local scale in rural areas of India: a strategy to ensure water well sustainability based on aquifer diffusivity and community participation

NASA Astrophysics Data System (ADS)

Kulkarni, Himanshu; Vijay Shankar, P. S.; Deolankar, S. B.; Shah, Mihir

Watershed development programmes provide an opportunity for sustainable management strategies, although currently, they remain largely `supply-side' mechanisms of water resources development. Hydrogeological conditions, community participation and status of groundwater usage are important in evolving strategies on `demand-side' groundwater management. Neemkheda aquifer is a typical low-storage, low-hydraulic conductivity aquifer from a watershed in the dryland regions of Madhya Pradesh State of central India. A shallow unconfined aquifer, it consists of an upper coarse, calcareous sandstone unit underlain by a fine-grained sandstone unit. A `well commune' of seven wells is poised to test the concept of joint groundwater management, wherein wells are mechanisms of tapping a common water source, the Neemkheda aquifer. The strategy for systematic groundwater management in the Neemkheda well commune is based upon the relationship between Transmissivity (T) and Storage coefficient (S), i.e. aquifer diffusivity, and its variation within the aquifer. Wells within a high diffusivity domain tend to dewater more quickly than wells within a low diffusivity domain. A well-use schedule during the dry season, based upon aquifer diffusivity forms the basis of the groundwater management concept. The distribution of local aquifer diffusivities governs the relationship between local and regional aquifer depletion times and forms the basis of the groundwater management exercise being proposed for the Neemkheda aquifer. Los programas de desarrollo de una cuenca hídrica son una oportunidad para el uso de estrategias de gestión sostenible, aunque hoy en día estas siguen siendo principalmente mecanismos para el desarrollo de recursos hídricos con énfasis en la ``oferta''. Las condiciones hidrogeológicas, la participación comunitaria y la condición de utilización del agua subterránea, son importantes en el desarrollo de estrategias para la gestión del agua subterránea, desde el punto de vista de la ``demanda''. El acuífero de Neemkheda es un acuífero típico de almacenamiento bajo y conductividad hidráulica baja, perteneciente a una cuenca hídrica ubicada en las regiones secas del Estado de Madhya Pradesh, en la parte central de India. Un acuífero de tipo libre, somero, formado por una unidad superior de arenisca calcárea de grano grueso, subyacida por una unidad de arenisca de grano fino. Un campo de pozos comunitario compuesto por siete pozos, pone a prueba el concepto de gestión conjunta del agua subterránea, dentro del cual los pozos son mecanismos para usar una fuente de agua común: El acuífero de Neemkheda. La estrategia usada para la gestión sistemática del agua subterránea, en el campo de pozos comunitario de Neemkheda, se basa en la relación existente entre Transmisividad (T) y Coeficiente de Almacenamiento (S), es decir en la Difusividad del Acuífero y en su variación observada dentro del mismo acuífero. Los pozos cuya difusividad esta dentro de un rango alto, tienden a experimentar un descenso en su nivel mas rápidamente que aquellos pozos con una difusividad baja. El concepto de gestión de agua subterránea se basa en un programa especial de operación para cada pozo durante la estación seca, el cual a su vez se basa en la difusividad del acuífero. La distribución de difusividades locales del acuífero rige las relaciones entre las épocas de descensos de nivel en el acuífero a escala regional y local, y además constituyen la base del ejercicio de la gestión del agua subterránea que se esta proponiendo para el acuífero de Neemkheda. Les programmes de développement des bassins versants offrent une occasion de développer des stratégies pour une gestion durable, bien qu' à présent elles restent en grande mesure `le terme source' dans le mécanisme de développement de la ressource en eau. Les conditions hydrogéologiques, la participation de la communauté et l'usage des eaux souterraines sont importants pour le `terme demande' dans les stratégies de gestion des eaux souterraines. L'aquifère de Neemkheda presents des caractéristiques typiques pour un bassin versant dans les régions arides de l'état Madhya Pradesh de l'Inde centrale en ce qui concerne les faible valeurs de la conductivité hydraulique et du coéfficient d'emmagasinement. Il s'agit d'un aquifère phrèatique dont la partie supérieure est constitué par des grès calcaire qui restent sur des grés plus fins. Afin d'essayer le concept de gestion integrée, on a réalisé dans l'aquifère de Neemkheda un captage ayant sept forages qui forment la ressource en eau communale. La stratégie de la gestion systématique du captage est basée sur la relation entre la transmissivité (T), le coéfficient d'emmagasinement (S), donc la diffusivité hydraulique ainsi que sa variation spatiale. Les puits forés dans les zones à grande diffusivité tendent à s'assècher plus vite que ceux creusés dans des zones à faible diffusivité. Le concept de la gestion des eaux souterraines est donc basé sur la distribution spatiale des diffusivités. À partir de ce concept on a développé un programme d'exploitation des forages pendant les saisons sèches. La relation entre les temps d' épuissment locaux et régionaux est determiné par la distribution spatiale de la diffusivitée et forme la base de l'exercice sur la gestion des eaux proposée pour l'aquifère de Neemkheda.

[Effects of acupuncture on bone metabolism and serum estradiol level in ovariectomy-induced osteoporosis rats].

PubMed

Ma, Jie; Yun-guang, Hu; Zhang, Da-hui

2008-08-01

To observe the effect of acupuncture (Acu) on bone metabolism and serum estradiol (E2) in ovariectomized (OVX) rats for studying its underlying mechanism in treating osteoporosis. Forty female SD rats of six months were randomized into sham operation (sham), model, Acu and Diethylstibestrol (DES) groups, with 10 cases in each. Postmenopausal osteoporosis model was established by removing ovaries under anesthesia. In Acu group, bilateral "Dazhu" (BL 11), "Shenshu" (BL 23) and "Pishu" (BL 20) were punctured and stimulated for 30 minutes, once daily for 60 days. Rats of DES group were drenched with saline+DES (22.5 microg/ml) 1 ml/100 g, once daily for 60 days. At the end of experiments, blood samples were collected from femoral artery for assaying serum alkaline phosphatase (ALP), tartrate-resistant acid phosphatase (TRAP) contents by using biochemistry, and serum bone gla protein (BGP) and E2 levels by immunoradioassay. Compared with sham group, uterus wet weight, serum E2 content in model group decreased significantly (P < 0.01) while body weight, serum ALP, BGP and TRAP levels in model group increased significantly (P < 0.01, 0.05). Compared with model group, uterus wet weight and serum Ez content in Acu and DES groups increased significantly (P < 0.01); while body weight, serum ALP, BGP and TRAP levels decreased considerably (P < 0.01). No significant differences were found between Acu and DES groups in serum E2, ALP, BGP and TRAP levels (P > 0.05). Acupuncture can suppress abnormal increase of body weight and decrease of serum E2 level, and significantly downregulate serum ALP, BGP and TRAP levels in OVX rats, which may contribute to its effect in relieving osteoporosis.

Clinical features and natural history of acquired cold urticaria in a tertiary referral hospital: a 10-year prospective study.

PubMed

Katsarou-Katsari, A; Makris, M; Lagogianni, E; Gregoriou, S; Theoharides, T; Kalogeromitros, D

2008-12-01

Acquired cold urticaria (ACU) represents a heterogeneous group of disorders that share a common clinical feature: the development of urticaria or angioedema after cold exposure. We present epidemiological and clinical data of subjects with ACU, natural progression and we examine possible parameters that could correlate with disease severity. During a 10-year period in all subjects with ACU, detailed record of personal history, laboratory testing, cold stimulation testing (CST), atopy assessment and disease severity took place. In a re-evaluation visit at the end of the surveillance period, ACU progression was assessed from patients in a subjective way. Four thousand one hundred fifty-seven individuals with chronic urticaria were referred, and 352 (198 males, 154 females, 8.47% of patients with chronic urticaria) presented definite symptoms of physical urticarias, while 95 individuals (49 males, 46 females, 27% of patients with physical urticarias) were detected with ACU. Sixty-two participants were included in study analysis. Thirty-two patients (51.6%) were female; the mean age was 41.5 +/- 15.6 years, while the mean age at disease onset was 32.5 +/- 15.6 years; half were < or = 30 years old at disease onset. The mean duration of surveillance was 9.0 +/- 6.9 years. During this time interval, 18 patients (29.0%) showed the same or even worse symptomatology, 26 patients reported some improvement (41.9%), while in 18 patients, symptoms resolved completely (29.0%); the mean time to resolution was 5.6 +/- 3.5 years. Disease severity was the only variable statistically significantly related to disease progression (P = 0.004). Cold urticaria is a chronic persistent disorder with occasional severe clinical manifestations.

Direct Digital Boiler Control Systems for the Navy Small Boiler Equipment.

DTIC Science & Technology

1983-02-01

Hardware. Each full-size ACU a 6 caculation modules 30 arrme, modufes sation for dead time lag contains input/output circuit a 16 control mo uies a...along with lather modules of the DCS-1000 family. ’The complete instrument consists of plug-in circuit boards that allow easy Teplacement of a...Maintenance-Most systems indicate trouble areas with diagnostic routines or integral LED indicators so that circuit boards can be replaced to correct

Fatigue of die cast zinc alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

2006-04-01

The rotating bending fatigue limit of die cast zinc alloy 2, alloy 3, alloy 5, AcuZinc 5, and ZA-8 were determined as a part of an on-going program by ILZRO into the mechanical properties of die cast zinc. The stress-life (S-N) curves of alloys 3, 5, AcuZinc 5, and ZA-8 were determined previously. This presentation reports the results of the S-N curve for Alloy 2 and the calculated fatigue limits for all five alloys. During the previous stress-life testing, the samples were stopped at 10 million cycles and the fatigue limit for alloy 3, alloy 5, and AcuZinc 5 appearedmore » to be higher and the fatigue limit for ZA-8 appeared to be lower than the values reported in the literature. This was further investigated in alloy 5 and ZA-8 by testing continuous cast bulk alloy 5 and ZA-8.« less

[Identification of meridian-acupoint diagrams and meridian diagrams].

PubMed

Shen, Wei-hong

2008-08-01

In acu-moxibustion literature, there are two kinds of diagrams, meridian-acupoint diagrams and meridian diagrams. Because they are very similar in outline, and people now have seldom seen the typical ancient meridian diagrams, meridian-acupoint diagrams have been being incorrectly considered to be the meridian diagrams for a long time. It results in confusion in acu-moxibustion academia. The present paper stresses its importance in academic research and introduces some methods for identifying them correctly. The key points for identification of meridian-acupoint diagrams and meridian diagrams are: the legend of diagrams and the drawing style of the ancient charts. In addition, the author makes a detailed explanation about some acu-moxibustion charts which are easily confused. In order to distinguish meridian-acupoint diagrams and meridian diagrams correctly, he or she shoulnd understand the diagrams' intrinsic information as much as possible and make a comprehensive analysis about them.

Test Rack Development for Extended Operation of Advanced Stirling Convertors at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Dugala, Gina M.

2010-01-01

The U.S. Department of Energy, Lockheed Martin Space Systems Company, Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of free-piston Stirling convertors to achieve higher conversion efficiency than with currently available alternatives. One part of NASA GRC's support of ASRG development includes extended operation testing of Advanced Stirling Convertors (ASCs) developed by Sunpower Inc. and GRC. The ASC consists of a free-piston Stirling engine integrated with a linear alternator. NASA GRC has been building test facilities to support extended operation of the ASCs for several years. Operation of the convertors in the test facility provides convertor performance data over an extended period of time. One part of the test facility is the test rack, which provides a means for data collection, convertor control, and safe operation. Over the years, the test rack requirements have changed. The initial ASC test rack utilized an alternating-current (AC) bus for convertor control; the ASRG Engineering Unit (EU) test rack can operate with AC bus control or with an ASC Control Unit (ACU). A new test rack is being developed to support extended operation of the ASC-E2s with higher standards of documentation, component selection, and assembly practices. This paper discusses the differences among the ASC, ASRG EU, and ASC-E2 test racks.

Current evidence of methotrexate efficacy in childhood chronic uveitis: a systematic review and meta-analysis approach.

PubMed

Simonini, Gabriele; Paudyal, Priyamvada; Jones, Gareth T; Cimaz, Rolando; Macfarlane, Gary J

2013-05-01

To summarize evidence regarding the effectiveness of MTX in the treatment of childhood autoimmune chronic uveitis (ACU). A systematic search of articles between January 1990 and June 2011 was conducted using EMBASE, Ovid MEDLINE, Evidence-Based Medicine Reviews-ACP Journal Club, the Cochrane Library and EBM Reviews. Studies investigating the efficacy of MTX as a single immunosuppressant medication in the treatment of ACU refractory to therapy with topical treatment and/or systemic treatment in children (≤16 years) were eligible for inclusion. The primary outcome measure was the improvement of intraocular inflammation, expressed as Tyndall, as defined by the Standardization of Uveitis Nomenclature working group criteria. The effect measure for each study was the proportion of people classified as responders. We determined a combined estimate of the proportion of children in the eligible studies responding to MTX. The initial search identified 246 articles of which 52 were potentially eligible. Nine eligible articles, all retrospective chart reviews, remained in the analysis. The number of children in studies ranged from 3 to 25, and the dose of MTX varied from 7.5 to 30 mg/m2. Altogether, 95 of 135 children responded to MTX. The pooled analysis suggested that MTX has a favourable effect in the improvement of intraocular inflammation: the proportion of responding subjects was 0.73 (95% CI 0.66, 0.81). Although randomized controlled trials are needed, the available evidence supports the use of MTX in the treatment of childhood ACU: approximately three-quarters of patients on MTX can expect improvement in intraocular inflammation.

[Clinical Therapeutic Effect of Oblique Needling with Tuina in Relieving Sacroiliac Joint Injury].

PubMed

Kuang, Jia-yi; Li, Yu-xuan; He, Yu-feng; Gan, Lin; Wang, Ai-ming; Tang, Shao-hua; Lu, Fei-yu; Yang, Li-juan; Cat, Xue-ling; Quan, Jian-lin

2016-04-01

To observe the therapeutic effect of oblique needling in combination with Tuina at the sacroiliac joint for patients experiencing sacroiliac joint injury. One hundred and twenty patients with sacroiliac joint injury were randomized into routine Tuina group and oblique needling combined with Tuina (Acu+ Tuina) group (n = 60 in each group). For patients of the Tuina group, routine Tuina as rotating, pressing-rubbing, digital pressing, articular moving, etc. was manipulated at Shangliao (BL 31), Ciliao (BL 32), Zhongliao (BL 31), Xialiao (BL 30), Huantiao (GB 30), Zhibian (BL 54), Weizhong (BL 40) and sacroiliac joint area. For patients of the Acu+Tuina group, the anatomical points between the bilateral iliac crests and the sacral joints were punctured obliquely with disposable acupuncture needles. The treatment was conducted for 30 min every time, once daily for 3 weeks except weekends. The Visual Analogue Scale (VAS) and Oswestry Disability Index (ODI, concerning intensity of pain, lifting, ability to care for oneself, ability to walk, ability to sit, sexual function, ability to stand, social life, sleep quality, and ability to travel) were employed to evaluate the patients' reactions and functional activity changes before and after the treatment. Following the treatment, of the two 60 patients in the Tuina and Acu + Tuina groups, 12 and 26 cases were cured, 20 and 20 experienced marked improvement, 16 and 11 were effective, 12 and 3 invalid, with the effective rates being 80% and 95%, respectively. The effective rate of the Acu+ Tuina group was significantly superior to that of the Tuina group (P<0.05). The VAS scores and OD were considerably decreased in both groups after the treatment and were significantly lower in the Acu+Tuina group than in the Tuina group (P<0.01). Oblique needling the anatomical points in the sacroiliac joint region combined with Tuina manipulation is evidently better than simple Tuina in reducing pain and in improving functional activity and life quality in sacroiliac joint injury patients.

Assessment of the performances of AcuStar HIT and the combination with heparin-induced multiple electrode aggregometry: a retrospective study.

PubMed

Minet, V; Bailly, N; Douxfils, J; Osselaer, J C; Laloy, J; Chatelain, C; Elalamy, I; Chatelain, B; Dogné, J M; Mullier, F

2013-09-01

Early diagnosis of immune heparin-induced thrombocytopenia (HIT) is challenging. HemosIL® AcuStar HIT and heparin-induced multiple electrode aggregometry (HIMEA) were recently proposed as rapid diagnostic methods. We conducted a study to assess performances of AcuStar HIT-IgG (PF4-H) and AcuStar HIT-Ab (PF4-H). The secondary objective was to compare the performances of the combination of Acustar HIT and HIMEA with standardised clinical diagnosis. Sera of 104 suspected HIT patients were retrospectively tested with AcuStar HIT. HIMEA was performed on available sera (n=81). The clinical diagnosis was established by analysing in a standardized manner the patient's medical records. These tests were also compared with PF4-Enhanced®, LTA, and SRA in subsets of patients. Thresholds were determined using ROC curve analysis with clinical outcome as reference. Using the recommended thresholds (1.00AU), the negative predictive value (NPV) of HIT-IgG and HIT-Ab were 100.0% (95% CI: 95.9%-100.0% and 95.7%-100.0%). The positive predictive value (PPV) were 64.3% (95% CI: 35.1%-87.2.2%) and 45.0% (95% CI: 23.2%-68.6%), respectively. Using our thresholds (HIT-IgG: 2.89AU, HIT-Ab: 9.41AU), NPV of HIT-IgG and HIT-Ab were 100.0% (95% CI: 96.0%-100.0% and 96.1%-100.0%). PPV were 75.0% (95% CI: 42.7%-94.5%) and 81.8% (95% CI: 48.3%-97.7%), respectively. Of the 79 patients with a medium-high pretest probability score, 67 were negative using HIT-IgG (PF4-H) test at our thresholds. HIMEA was performed on HIT-IgG positive patients. Using this combination, only one patient on 79 was incorrectly diagnosed. Acustar HIT showed good performances to exclude the diagnosis of HIT. Combination with HIMEA improves PPV. Copyright © 2013 Elsevier Ltd. All rights reserved.

A new genus and species of chigger mite (Trombidiformes: Trombiculidae) from Loxodontomys pikumche (Rodentia: Cricetidae) in Chile.

PubMed

Fuente, María Carolina Silva-de La; Casanueva, María Eugenia; Salas, Lucila Moreno; González-Acuña, Daniel

2016-03-16

The family Trombiculidae is one of the most diverse and cosmopolitan (Walter et al. 2009). In Chile, the family Trombiculidae is represented by six genera associated with reptiles: Eutrombicula Ewing; Microtrombicula Ewing; Paratrombicula Goff & Whitaker; Whartonacarus (Brennan & Jones); Diaguitacarus Stekolnikov & González-Acuña and Proschoengastia Vercammen-Grandjean and two genera associated with rodents Chilacarus Webb, Bennett & Loomis and Poliremotus Brennan & Goff (Stekolnikov & González-Acuña 2015).

Hydrostratigraphic interpretation of test-hole and surface geophysical data, Elkhorn and Loup River Basins, Nebraska, 2008 to 2011

USGS Publications Warehouse

Hobza, Christopher M.; Bedrosian, Paul A.; Bloss, Benjamin R.

2012-01-01

The Elkhorn-Loup Model (ELM) was begun in 2006 to understand the effect of various groundwater-management scenarios on surface-water resources. During phase one of the ELM study, a lack of subsurface geological information was identified as a data gap. Test holes drilled to the base of the aquifer in the ELM study area are spaced as much as 25 miles apart, especially in areas of the western Sand Hills. Given the variable character of the hydrostratigraphic units that compose the High Plains aquifer system, substantial variation in aquifer thickness and characteristics can exist between test holes. To improve the hydrogeologic understanding of the ELM study area, the U.S. Geological Survey, in cooperation with the Nebraska Department of Natural Resources, multiple Natural Resources Districts participating in the ELM study, and the University of Nebraska-Lincoln Conservation and Survey Division, described the subsurface lithology at six test holes drilled in 2010 and concurrently collected borehole geophysical data to identify the base of the High Plains aquifer system. A total of 124 time-domain electromagnetic (TDEM) soundings of resistivity were collected at and between selected test-hole locations during 2008-11 as a quick, non-invasive means of identifying the base of the High Plains aquifer system. Test-hole drilling and geophysical logging indicated the base-of-aquifer elevation was less variable in the central ELM area than in previously reported results from the western part of the ELM study area, where deeper paleochannels were eroded into the Brule Formation. In total, more than 435 test holes were examined and compared with the modeled-TDEM soundings. Even where present, individual stratigraphic units could not always be identified in modeled-TDEM sounding results if sufficient resistivity contrast was not evident; however, in general, the base of aquifer [top of the aquifer confining unit (ACU)] is one of the best-resolved results from the TDEM-based models, and estimates of the base-of-aquifer elevation are in good accordance with those from existing test-hole data. Differences between ACU elevations based on modeled-TDEM and test-hole data ranged from 2 to 113 feet (0.6 to 34 meters). The modeled resistivity results reflect the eastward thinning of Miocene-age and older stratigraphic units, and generally allowed confident identification of the accompanying change in the stratigraphic unit forming the ACU. The differences in elevation of the top of the Ogallala, estimated on the basis of the modeled-TDEM resistivity, and the test-hole data ranged from 11 to 251 feet (3.4 to 77 meters), with two-thirds of model results being within 60 feet of the test-hole contact elevation. The modeled-TDEM soundings also provided information regarding the distribution of Plio-Pleistocene gravel deposits, which had an average thickness of 100 feet (30 meters) in the study area; however, in many cases the contact between the Plio-Pleistocene deposits and the overlying Quaternary deposits cannot be reliably distinguished using TDEM soundings alone because of insufficient thickness or resistivity contrast.

Identification of the First Diketomorpholine Biosynthetic Pathway Using FAC-MS Technology.

PubMed

Robey, Matthew T; Ye, Rosa; Bok, Jin Woo; Clevenger, Kenneth D; Islam, Md Nurul; Chen, Cynthia; Gupta, Raveena; Swyers, Michael; Wu, Edward; Gao, Peng; Thomas, Paul M; Wu, Chengcang C; Keller, Nancy P; Kelleher, Neil L

2018-05-18

Filamentous fungi are prolific producers of secondary metabolites with drug-like properties, and their genome sequences have revealed an untapped wealth of potential therapeutic leads. To better access these secondary metabolites and characterize their biosynthetic gene clusters, we applied a new platform for screening and heterologous expression of intact gene clusters that uses fungal artificial chromosomes and metabolomic scoring (FAC-MS). We leverage FAC-MS technology to identify the biosynthetic machinery responsible for production of acu-dioxomorpholine, a metabolite produced by the fungus, Aspergilllus aculeatus. The acu-dioxomorpholine nonribosomal peptide synthetase features a new type of condensation domain (designated C R ) proposed to use a noncanonical arginine active site for ester bond formation. Using stable isotope labeling and MS, we determine that a phenyllactate monomer deriving from phenylalanine is incorporated into the diketomorpholine scaffold. Acu-dioxomorpholine is highly related to orphan inhibitors of P-glycoprotein targets in multidrug-resistant cancers, and identification of the biosynthetic pathway for this compound class enables genome mining for additional derivatives.

[Analysis on research projects for acupuncture and moxibustion supported by NSFC during the 11th 5-year-plan].

PubMed

Zhao, Chang-Long; Jing, Xiang-Hong; Li, Yu-Qing; Li, Liang; Rong, Pei-Jing; Wang, Chang-En

2012-08-01

In the present paper, the authors introduce the approved and finished research projects for acupuncture and moxibustion therapies supported by the National Natural Science Foundation of China (NSFC) during the 11th 5-year-plan. A total of 194 research projects were subsidized by NSFC from 2006 to 2010. These projects include 6 aspects: meridian-collaterals, acupoint theory, acupuncture analgesia, mechanisms underlying improvement of different clinical problems, clinical trials, and moxibustion therapy. The research on acupoints has been becoming a new hotspot in recent years. Majority of the research projects focus on the mechanism of acu-moxibustion underlying improvement of different clinical problems, while fewer projects on clinical trials. During the 11th 5-year-plan, 119 projects were completed; most of them involved meridian-collateral theory, acupoint theory, mechanism of acu-moxibustion underlying improvement of clinical problems and acupuncture manipulations. Following analysis of the finished research projects, we find that 1) many neurobiological methods and techniques are commonly used in the research on meridian-collateral theory; 2) the research on acupoint theory is changing from observing the local morphological structure to identifying characteristics of the regional activated receptors, particularly under the circumstances of visceral pathological conditions and efficacies of acupoints; 3) researches on the underlying mechanism of acu-moxibusiton for improving clinical disorders mainly focused on its cerebral protective effects against cerebral ischemia, in addition, researches about other diseases on clinical conditions have been also carried out, but the related mechanisms are far from understanding; 4) In many research projects, various new methods and techniques, such as fMRI, position emission tomography, genomics, proteomics, molecular biology, nerve stem cell, etc. were widely used; 5) Randomized controlled multi-center clinical trials are definitely insufficient. Only two clinical projects were finished during the 11th 5-year-plan. Moreover, it should be noted that in the subject of acu-moxibustion, independent innovation researches are fewer; the foundation of competitive ability is relatively weaker; the supporting conditions for finishing the research projects are poorer in some institutes or districts; and the interrelations among the theoretical, experimental and clinical researches are not intimately close, leading to relative lag in the subject development.

Numerical analysis of the hydrogeologic controls in a layered coastal aquifer system, Oahu, Hawaii, USA

NASA Astrophysics Data System (ADS)

Oki, Delwyn S.; Souza, William R.; Bolke, Edward L.; Bauer, Glenn R.

The coastal aquifer system of southern Oahu, Hawaii, USA, consists of highly permeable volcanic aquifers overlain by weathered volcanic rocks and interbedded marine and terrestrial sediments of both high and low permeability. The weathered volcanic rocks and sediments are collectively known as caprock, because they impede the free discharge of groundwater from the underlying volcanic aquifers. A cross-sectional groundwater flow and transport model was used to evaluate the hydrogeologic controls on the regional flow system in southwestern Oahu. Controls considered were: (a) overall caprock hydraulic conductivity; and (b) stratigraphic variations of hydraulic conductivity in the caprock. Within the caprock, variations in hydraulic conductivity, caused by stratigraphy or discontinuities of the stratigraphic units, are a major control on the direction of groundwater flow and the distribution of water levels and salinity. Results of cross-sectional modeling confirm the general groundwater flow pattern that would be expected in a layered coastal system. Groundwater flow is: (a) predominantly upward in the low-permeability sedimentary units; and (b) predominantly horizontal in the high-permeability sedimentary units. Résumé Le système aquifère littoral du sud d'Oahu (Hawaii, États-Unis) est constitué par des aquifères de terrains volcaniques très perméables, recouverts par des roches volcaniques altérées, et interstratifiés avec des sédiments marins et continentaux de perméabilité aussi bien forte que faible. Les roches volcaniques altérées et les sédiments sont globalement considérés comme une couverture, parce qu'ils s'opposent à l'écoulement de l'eau souterraine provenant des aquifères volcaniques sous-jacents. Les contrôles hydrogéologiques sur le système aquifère régional du sud-ouest d'Oahu ont étéévaluées au moyen d'un modèle d'écoulement et de transport sur une section transversale. Ces contrôles prennent en compte la conductivité hydraulique de la couverture dans son ensemble et les variations de la conductivité hydraulique liées à la stratigraphie de la couverture. A l'intérieur de la couverture, les variations de la conductivité hydraulique, dues à la stratigraphie ou à des discontinuités entre les unités stratigraphiques, sont le contrôle principal de la direction d'écoulement et de la répartition des niveaux et de la salinité de l'eau. La modélisation sur une section transversale a donné des résultats qui confirment l'organisation générale des directions d'écoulement, telle qu'elle pouvait être envisagée dans un aquifère littoral multicouche. L'écoulement souterrain est essentiellement vertical vers le haut dans les unités sédimentaires à faible perméabilité, et essentiellement horizontal dans les unités sédimentaires à forte perméabilité. Resumen El sistema acuífero costero de la zona sur de Oahu, en Hawaii, está formado por acuíferos volcánicos de alta permeabilidad, subyacentes a rocas volcánicas alteradas, con inclusiones de sedimentos marinos y terrestres, tanto de alta como de baja permeabilidad. Al conjunto de rocas volcánicas alteradas y sedimentos se le conoce por "tapón de roca", ya que impide la descarga libre de las aguas subterráneas del acuífero volcánico subyacente. Se usó un modelo de flujo de agua subterránea y transporte de solutos en sección vertical para evaluar los aspectos hidrogeológicos que controlan el flujo regional en la zona sudoeste de Oahu. Se consideraron: (a) la conductividad hidráulica global del tapón y (b) las variaciones estratigráficas de la conductividad hidráulica. En el tapón de roca, las variaciones de la conductividad hidráulica, causadas por la estratigrafía o por discontinuidades en las unidades estratigráficas, son las que controlan la dirección del flujo subterráneo y la distribución de niveles piezométricos y salinidad. Los resultados del modelo en sección transversal confirman la distribución del flujo subterráneo que cabría esperar en un sistema costero estratificado. El flujo de aguas subterráneas es: (a) predominantemente vertical hacia arriba en las unidades sedimentarias de baja permeabilidad; y (b) predominantemente horizontal en las unidades sedimentarias de alta permeabilidad.

Costs and outcomes associated with IVF using recombinant FSH.

PubMed

Ledger, W; Wiebinga, C; Anderson, P; Irwin, D; Holman, A; Lloyd, A

2009-09-01

Cost and outcome estimates based on clinical trial data may not reflect usual clinical practice, yet they are often used to inform service provision and budget decisions. To expand understanding of assisted reproduction treatment in clinical practice, an economic evaluation of IVF/intracytoplasmic sperm injection (ICSI) data from a single assisted conception unit (ACU) in England was performed. A total of 1418 IVF/ICSI cycles undertaken there between October 2001 and January 2006 in 1001 women were analysed. The overall live birth rate was 22% (95% CI: 19.7-24.2), with the 30- to 34-year age group achieving the highest rate (28%). The average recombinant FSH (rFSH) dose/cycle prescribed was 1855 IU. Average cost of rFSH/cycle was 646 pound(SD: 219 pound), and average total cost/cycle was 2932 pound (SD: 422 pound). Economic data based on clinical trials informing current UK guidance assumes higher doses of rFSH dose/cycle (1750-2625 IU), higher average cost of drugs/cycle (1179 pound), and higher average total cost/cycle (3266 pound). While the outcomes in this study matched UK averages, total cost/cycle was lower than those cited in UK guidelines. Utilizing the protocols and (lower) rFSH dosages reported in this study may enable other ACU to provide a greater number of IVF/ICSI cycles to patients within given budgets.

[The affinity between Le family of Tong Ren Tang and acu-moxibustion as viewed from Mian xue tang zhen jiu ji cheng (Mian Xuetang's Synthetic Work of Acu-moxibustion)].

PubMed

Huang, L X

2017-11-28

This compilation process of Mian xue tang zhen jiu ji cheng ( Mian Xuetang ' s Synthetic Work of Acu - moxibustion )was quite mysterious, the book's advent coincidentally met with several major historical events which made its value of decoding its historical functions far beyond its academic value. The editor of this book is Le Xianyang, the founder of Tong Ren Tang. While compiling this book, he also made a replica of Ming-Dynasty's Zhengtong bronze statue. More than 200 years later, Le Jingyu, the 12th generation of the Le family revised Ming Tang Tu inherited from his ancestors and engraved Ming Tang Tu on the stone for its standardization. This great achievement of Le family was no less than the recasting of the Tiansheng bronze statue and the reengraving Tong ren shu xue zhen jiu tu jing ( Illustrated Manual of Acupuncture Points of the Bronze Figure ) by support of state power for building the Beijing Imperial Hospital in the eighth year of the Zhengtong reign (1443).

Susceptibility of the adolescent brain to cannabinoids: long-term hippocampal effects and relevance to schizophrenia.

PubMed

Gleason, K A; Birnbaum, S G; Shukla, A; Ghose, S

2012-11-27

Clinical studies report associations between cannabis use during adolescence and later onset of schizophrenia. We examined the causal relationship between developmental cannabinoid administration and long-term behavioral and molecular alterations in mice. Mice were administered either WIN 55,212-2 (WIN), a cannabinoid receptor 1 (CB1) agonist or vehicle (Veh) during adolescence (postnatal day 30-35) or early adulthood (postnatal day 63-70). Behavioral testing was conducted after postnatal day 120 followed by biochemical assays. Adolescent cannabinoid treatment (ACU) leads to deficits in prepulse inhibition and fear conditioning in adulthood. Metabotropic glutamate receptors type 5 (mGluR5), a receptor critically involved in fear conditioning and endocannabinoid (eCB) signaling, is significantly reduced in the ACU mouse hippocampus. Next, we examined expression profiles of genes involved in eCB synthesis (diacylglycerol lipase (DGL)) and uptake (monoacylglycerol lipase (MGL) and fatty acid amide hydrolase (FAAH)) in the experimental mice. We find evidence of increased MGL and FAAH in ACU mice, reflecting increases in eCB uptake and degradation. These data suggest that administration of cannabinoids during adolescence leads to a behavioral phenotype associated with a rodent model of schizophrenia, as indexed by alterations in sensorimotor gating and hippocampal-dependent learning and memory deficits. Further, these deficits are associated with a reduction in hippocampal mGluR5 and a sustained change in eCB turnover, suggesting reduced eCB signaling in the ACU hippocampus. These data suggest that significant cannabis use during adolescence may be a contributory causal factor in the development of certain features of schizophrenia and may offer mGluR5 as a potential therapeutic target.

Ground-water resources of the Acu Valley, Rio Grande Norte, Brazil

USGS Publications Warehouse

Rodis, Harry G.; de Castro Araujo, Jonas Maria.

1968-01-01

The Acu Valley is the lower part of the Rio Piranhas valley in the northwestern part of the State of Rio Grande do Norte, Brazil. It begins where the Rio Piranhas leaves the crystalline Precambrian rocks to flow across the outcrop of sedimentary rocks. The area considered in this report extends northward for about 45 kilometers; it is terminated arbitrarily where encroachment by sea water has contaminated the aquifer and imparted a disagreeable saline taste to the water in it. The boundary was not determined in the field, however, for lack of special equipment. Part of the extensive uplands on either side of the valley are included. This makes the total area approximately 2,500 square kilometers. The largest town, Acu, had a population of about 8,000 in 1960. The area is considered to be part of the Drought Polygon of northeast Brazil because the precipitation, although averaging 448 millimeters annually at Acu, varies widely from year to year and often is deficient for many months. The precipitation has been supplemented by use of irrigation wells, but irrigated agriculture is not yet far advanced, and the quantities of water used in irrigation are small. Geologically, the area consists of basement crystalline rocks (Precambrian), a wedge of sedimentary rocks thickening northward (Cretaceous), and alluvial sediments constituting a narrow band in the bottom of the valley (Alluvium and terrace deposits). The crystalline rocks contain water mainly in fractures and, in general, are impermeable. The sedimentary rocks of Cretaceous age comprise two units: a thick but fine-grained sandstone grading upward into siltstone and shale (Acu Sandstone), and limestone and dolomite with an included shale zone (Jandaira Limestone). The sandstone especially and the limestone to a lesser degree are ground-water reservoirs of large capacity. The limestone has been tapped at several places, but the sandstone and its contained water are practically untested and, hence, imperfectly understood. The alluvium of the first terrace is the aquifer supplying most of the ground water being used in the area. Wells in the alluvium yield as much as S0,000 liters per hour. Larger yields probably could be obtained from wells designated to take full advantage of the aquifer. There are in the valley about 300 dug wells which are used for irrigation. Half of these are equipped with pumps and engines. The rest, together with about 500 drive-point wells, are equipped with manual or windmill-driven pumps. In addition to irrigation, the water is used in homes and for cattle. The quantities of water currently used in irrigation are relatively small, both per hectare and in the area as a whole, but .this will probably increase substantially when intensive irrigation becomes a reality. The annual pumpage from the alluvium, nearly constant since 1959, was about 2.5 million cubic meters in 1964, which is only about 90 cubic meters from each hectare-meter of saturated alluvium. This amount would lower the water table about 1 meter in 11 years, if there were no recharge. Actually, no such decline is likely to occur, because the recharge from precipitation alone is estimated to be more than enough to replace the water currently being pumped. Chemical analyses of eight samples show that the ground water in the alluvium is acceptable for most uses. The water in the Acu Sandstone and Jandazra Limestone is more mineralized than that in the alluvium and at some places, at least, is not acceptable for human consumption. The available chemical data on this water, however, are not adequate to judge fully the quality of the water in these formations. It is estimated that about .'22 million cubic meters of water would be needed annually if irrigation were extended to all the bottom land, which totals about 25,000 hectares. This amount is only one-fourth to one-half the estimated recharge from precipitation alone. The present rate of application of water is very low

Effect of cultivation ages on Cu accumulation in Greenhouse Soils in North China

NASA Astrophysics Data System (ADS)

Wang, Jun; Guo, Wenmiao; Chen, Xin; Shi, Yi

2017-11-01

In this study, we determined the influence of cultivation age on Cu accumulation in greenhouse soils. The concentration of plant available Cu (A-Cu) decreased with depth, and the contents of top soils (0-40 cm) in greenhouses were higher than those of the open field. There was a positive correlation between A-Cu concentrations in soils and cultivation ages (R2=0.572). The contents of total Cu (T-Cu) decreased with depth, and positively correlated with cultivation ages in top soils (0-20cm) (R2=0.446). The long-term usage of manures can cause Cu increase and accumulation in greenhouse soils in comparison to the open field.

Determination of aquifer roof extending under the sea from variable-density flow modelling of groundwater response to tidal loading: case study of the Jahe River Basin, Shandong Province, China

NASA Astrophysics Data System (ADS)

Cheng, Jianmei; Chen, Chongxi; Ji, Menrui

The main task of studies on salt-water intrusion into coastal confined aquifers is to predict the position of the fresh- salt-water interface, which can be determined from the length of the aquifer roof extending under the sea. Records of groundwater level affected by tides can be used to infer hydrological conditions and determine hydraulic parameters of an aquifer extending under the sea. In this paper, a three-dimensional, variable-density groundwater flow model has been developed to determine the equivalent roof length of an aquifer extending under the sea from the tidal-effected data of groundwater level in the Jahe River Basin, Shandong Province, China. The seaward boundary is obtained by converging hydraulic head fluctuations observed in drill holes with calculated values, and the aquifer parameters in the extending zone are estimated. The impacts of aquifer roof length and aquifer parameters on the fluctuation of tidal groundwater are studied. It is concluded that the length of the aquifer roof extending under the sea should correspond with certain aquifer parameters in the extrapolation zone. Therefore, the seaward boundary determined from tidal-effect information is the equivalent boundary in hydrodynamic characteristics rather than the true boundary of the confined aquifer Les sujets principaux des études d'instrusion saline dans les aquifères confinés en zone côtière sont la prédiction de la position de l'interface entre l'eau salée et l'eau fraîche, qui peut être déterminée à partir de l'extention du toit de l'aquifère sous la mer. Les enregistrements des niveaux des eaux souterraines influencés par les marées peuvent être utilisés pour préciser les conditions hydrologiques et déterminer les paramètres hydrauliques d'un aquifère possédant une extension sous la mer. Dans cet article, un modèle tridimensionnel comprenant des eaux souterraines de densité variable a été développé pour déterminer la longueur équivalente du toit d'un aquifère qui s'étend sous la mer à partir des données concernant les effets de marée sur les eaux souterraines dans le bassin de la rivière Jahe, dans la province de Shandong, Chine. La limite de salinité est déterminée en faisant converger les fluctuations des hauteurs piézométriques avec les valeurs calculées, et les paramètres de l'aquifère sont estimés dans la zone s'étendant sous la mer. L'incidence de la longueur de l'aquifère sous la mer sur les fluctuations des niveaux est étudiée. On en conclut que la longueur du toit de l'aquifère sous la mer peut correspondre à certains aquifères paramètres dans la zone d'extrapolation. Par conséquent, la limite de salinité déterminée à partir des effets de marée est l'équivalent d'une limite hydrodynamique plutôt que la véritable limite de l'aquifère. El principal objetivo de los estudios sobre intrusiones de agua salada en acuíferos costeros confinados es predecir la posición de la interfase agua dulce-agua salada, la cual puede determinarse a partir de la longitud del techo del acuífero que se extiende por debajo del mar. Los registros de niveles de agua subterránea afectados por las mareas puede utilizarse para inferir las condiciones hidrológicas y determinar los parámetros hidráulicos de un acuífero que se extiende por debajo del mar. En este artículo se ha desarrollado un modelo de flujo tri-dimensional de agua subterránea de densidad variable para determinar la longitud del techo equivalente de un acuífero que se extiende por debajo del mar a partir de datos, afectados por la marea, de niveles de agua subterránea en la Cuenca del Río Jahe, Provincia Shandong, China. El límite hacia el océano se obtiene por convergencia de fluctuaciones de presiones hidráulicas observadas en pozos con valores calculados, y se estiman los parámetros del acuífero en la zona extendida. Se estudian los impactos de la longitud del techo del acuífero y los parámetros del acuífero en la fluctuación del agua subterránea afectada por las mareas. Se concluye que la longitud del techo del acuífero que se extiende por debajo del mar debería corresponder con ciertos parámetros del acuífero en la zona de extrapolación. Por lo tanto, el límite hacia el océano determinado a partir de información de efectos de marea es el límite equivalente en características hidrodinámicas más que el límite real del acuífero confinado.

CHROMASSI: a therapy advice system based on chrono-massage and acupression using the method of ZiWuLiuZhu.

PubMed

Nguyen, H P; Le, D L; Tran, Q M; Nguyen, V T; Nguyen, N O

1995-01-01

Massage and Acupression have a history of many years of use by the Vietnamese people in the treatment of diseases, and they can give wonderful therapeutic effects in painful syndromes and chronic diseases, etc. On the other hand, some methods of Chrono-Acupuncture based on chronobiological theory and the holistic concept of traditional medicine are studied and applied in clinical applications. This paper presents the therapy advice system based on Chrono-Massage and Acupression using the method of ZiWuLiuZhu called CHROMASSI. The system includes four major parts. Massage and Acupression Teaching: This part can provide the user with some background in Massage and Acupression theory such as the pathology of the meridians, the classification of points and their function, the therapeutic properties of points, the methods of Massage and Acupression (including Pression, Friction, Rubbing, Light Massage, Petrissage, Rolling and Rubbing, Percussion and Vibration), and the direction of the meridians circulation, displaying AcuPoints represented by color pictures of the 12 main meridians and 2 vessels. More than 330 popular AcuPoints are used in the system. Open AcuPoint Calculating: This module can help us to calculate open AcuPoints based on data about days, months, years and hours using the special method of ZiWuLiuZhu. The Points adopted by ZiWuLiuZhu are the Five Shu Points and Source Points including 66 points (all of them are located below the elbows and knees). The effectiveness of these points becomes particularly evident when they are needled or punctured at optimum time intervals. For example, at 9:00 a.m., September 22, 1994, the open Points by the ZiWuLiuZhu method will be the points K2 (Nhien Coc) and K10 (Am Coc). According to the chronotherapeutic method, first we have to pressure (or puncture) the above points in order to attain the sensation RDac KhiS (arrival of energy), then pressure the other treating points as in ordinary Massage and Acupression. Therapy Consultation: Knowledge of the system was provided by Prof. Nguyen Van Thang and Doctor Nguyen Nhu Oanh at the Vietnam National Institute of Oriental Medicine. CHROMASSI is able to advise on ways to treat about 153 diseases and symptoms in the following fields: Aches and Pains, Insomnia, Common Cold and Influenza, Sexual Disturbances, Medical Aesthetics in Face, Breast and Buttock, Hygiene, Cardio-Vascular Tract, Digestive Tract, Urinary Tract, Respiratory Tract, Genital Tract, Ear-Nose-Throat Tract, Nervous Tract. The system can provide information about Remarks, Acupoints formulas for treating by Massage and Acupression with colour pictures of meridians. Explanation: The CHROMASSI system can explain why the AcuPoints are used for treating diseases based on the theoretical bases of traditional Vietnamese medicine and on the meridians and collaterals system theory. The colour pictures representing the circulation of vital energy in the meridians are used for explanation. The CHROMASSI system was developed in TURBO-PROLOG and TURBO-PASCAL and can run on IBM PC/AT computers and compatibles. The system can be used for teaching and for clinics of Massage and Acupression combined with Chronotherapeutics. At present the system is used by some physicians for clinical applications. The first results indicate that, in 20 cases of generalized headache compared with the control group, the combining of chronoacupression using the ZiWuLiuZhu method and ordinary Massage and Acupression gave better effects than that obtained by either method alone.

Disposition, profiling and identification of emixustat and its metabolites in humans.

PubMed

Fitzsimmons, Michael E; Sun, Gang; Kuksa, Vladimir; Reid, Michael J

2018-06-01

1. Emixustat is a small molecule that potently inhibits retinal pigment epithelium 65 isomerohydrolase. Emixustat is in clinical development for the treatment of various retinopathies (i.e. Stargardt disease and diabetic retinopathy). 2. A human absorption, distribution, metabolism, and excretion (ADME) study was conducted with a single dose of [ 14 C]-emixustat in healthy male subjects. Total 14 C content in plasma, urine, and faeces was determined using accelerator mass spectrometry (AMS), and metabolic profiles in pooled plasma and urine were investigated by both HPLC-AMS and 2D LC-MS/MS. 3. After a single, oral 40-mg dose of [ 14 C]-emixustat, recovery of total 14 C was nearly complete within 24 h. Urine was the major route of 14 C elimination; accounting for > 90% of the administered dose. 4. Biotransformation of emixustat occurred primarily at two structural moieties; oxidation of the cyclohexyl moiety and oxidative deamination of the 3R-hydroxypropylamine, both independently and in combination to produce secondary metabolites. Metabolite profiling in pooled plasma samples identified 3 major metabolites: ACU-5124, ACU-5116 and ACU-5149, accounting for 29.0%, 11.5%, and 10.6% of total 14 C, respectively. Emixustat was metabolized in human hepatocytes with unchanged emixustat accounting for 33.7% of sample radioactivity and predominantly cyclohexanol metabolites observed.

Administration of high doses of copper to capuchin monkeys does not cause liver damage but induces transcriptional activation of hepatic proliferative responses.

PubMed

Araya, Magdalena; Núñez, Héctor; Pavez, Leonardo; Arredondo, Miguel; Méndez, Marco; Cisternas, Felipe; Pizarro, Fernando; Sierralta, Walter; Uauy, Ricardo; González, Mauricio

2012-02-01

Liver cells respond to copper loading upregulating protective mechanisms. However, to date, except for liver content, there are no good indicators that identify individuals with excess liver copper. We hypothesized that administering high doses of copper to young (5.5 mg Cu · kg⁻¹ . d⁻¹) and adult (7.5 mg Cu · kg⁻¹ . d⁻¹) capuchin monkeys would induce detectable liver damage. Study groups included adult monkeys (2 females, 2 males) 3-3.5 y old at enrollment treated with copper for 36 mo (ACu); age-matched controls (1 female, 3 males) that did not receive additional copper (AC); young monkeys (2 female, 2 males) treated from birth with copper for 36 mo (YCu); and young age-matched controls (2 female, 2 males) that did not receive additional copper (YC). We periodically assessed clinical, blood biochemical, and liver histological indicators and at 36 mo the hepatic mRNA abundance of MT2a, APP, DMT1, CTR1, HGF, TGFβ, and NFκΒ only in adult monkeys. After 36 mo, the liver copper concentration was 4-5 times greater in treated monkeys relative to controls. All monkeys remained healthy with normal routine serum biochemical indices and there was no evidence of liver tissue damage. Relative mRNA abundance of HGF, TGFβ and NFκB was significantly greater in ACu than in AC monkeys. In conclusion, capuchin monkeys exposed to copper at doses up to 50 times the current upper level enhanced expression of genes related to inflammation and injury without clinical, blood biochemical, or histological evidence of liver damage.

Time and Frequency Synchronization on the Virac Radio Telescope RT-32

NASA Astrophysics Data System (ADS)

Bezrukovs, V.

2016-04-01

One of the main research directions of Ventspils International Radio Astronomy Centre (VIRAC) is radio astronomy and astrophysics. The instrumental base for the centre comprised two fully steerable parabolic antennas, RT-16 and RT-32 (i.e. with the mirror diameter of 16 m and 32 m). After long reconstruction, radio telescope RT-32 is currently equipped with the receiving and data acquisition systems that allow observing in a wide frequency range from 327 MHz to 9 GHz. New Antenna Control Unit (ACU) allows stable, fast and precise pointing of antenna. Time and frequency distribution service provide 5, 10 and 100 MHz reference frequency, 1PPS signals and precise time stamps by NTP protocol and in the IRIG-B format by coaxial cable. For the radio astronomical observations, main requirement of spatially Very Long Base Line Interferometric (VLBI) observations for the observatory is precise synchronization of the received and sampled data and linking to the exact time stamps. During October 2015, radio telescope RT-32 performance was tested in several successful VLBI experiments. The obtained results confirm the efficiency of the chosen methods of synchronization and the ability to reproduce them on similar antennas.

Aquifer/aquitard interfaces: mixing zones that enhance biogeochemical reactions

NASA Astrophysics Data System (ADS)

McMahon, P. B.

2001-01-01

Several important biogeochemical reactions are known to occur near the interface between aquifer and aquitard sediments. These reactions include O2 reduction; denitrification; and Fe3+, SO42-, and CO2 (methanogenesis) reduction. In some settings, these reactions occur on the aquitard side of the interface as electron acceptors move from the aquifer into the electron-donor-enriched aquitard. In other settings, these reactions occur on the aquifer side of the interface as electron donors move from the aquitard into the electron-acceptor-enriched, or microorganism-enriched, aquifer. Thus, the aquifer/aquitard interface represents a mixing zone capable of supporting greater microbial activity than either hydrogeologic unit alone. The extent to which biogeochemical reactions proceed in the mixing zone and the width of the mixing zone depend on several factors, including the abundance and solubility of electron acceptors and donors on either side of the interface and the rate at which electron acceptors and donors react and move across the interface. Biogeochemical reactions near the aquifer/aquitard interface can have a substantial influence on the chemistry of water in aquifers and on the chemistry of sediments near the interface. Résumé. Il se produit au voisinage de l'interface entre les aquifères et les imperméables plusieurs réactions biogéochimiques importantes. Il s'agit des réactions de réduction de l'oxygène, de la dénitrification et de la réduction de Fe3+, SO42- et CO2 (méthanogenèse). Dans certaines situations, ces réactions se produisent du côté imperméable de l'interface, avec des accepteurs d'électrons qui vont de l'aquifère vers l'imperméable riche en donneurs d'électrons. Dans d'autres situations, ces réactions se produisent du côté aquifère de l'interface, avec des donneurs d'électrons qui se déplacent de l'imperméable vers l'aquifère riche en accepteurs d'électrons ou en microorganismes. Ainsi, l'interface aquifère/imperméable constitue une zone de mélange capable de supporter une plus grande activité microbienne que chacune des deux unités hydrogéologiques seules. L'extension des réactions biogéochimiques dans la zone de mélange et la largeur de cette zone dépendent de plusieurs facteurs, dont l'abondance et la solubilité des accepteurs et des donneurs d'électrons de chaque côté de l'interface, et le taux de réaction et de déplacement des accepteurs et des donneurs d'électrons au travers de cette interface. Les réactions biogéochimiques au voisinage de l'interface aquifère/imperméable peuvent avoir une influence appréciable sur le chimisme de l'eau des aquifères et sur celui des sédiments au niveau de l'interface. Resúmen. Es conocido que varias reacciones biogeoquímicas de importancia pueden tener lugar cerca de la interfaz entre los sedimentos de un acuífero y de un acuitardo. Entre ellas, destaca la reducción del O2, la denitrificación, y la reducción del Fe+3, SO4-2 y CO2 (metanogénesis). En algunos casos, estas reacciones se producen en la región cercana al acuitardo, ya que los dadores de electrones se mueven desde éste hacia el acuífero, el cual está enriquecido en aceptores de electrones o en microorganismos. Así, la interfaz acuífero/acuitardo constituye una zona de mezcla que es capaz de sustentar una actividad microbiana mayor que cualquier unidad hidrogeológica por sí misma. El alcance de las reacciones biogeoquímicas en la zona de mezcla y el ancho de esta zona de mezcla depende de varios factores, como la abundancia y la solubilidad de los aceptores y dadores de electrones en ambas caras de la interfaz y la velocidad a la que los aceptores y dadores de electrones reaccionan y se mueven a través de la interfaz. Las reacciones biogeoquímicas cerca de la interfaz acuífero/acuitardo pueden tener una influencia substancial en la hidroquímica de los acuíferos y en la química de los sedimentos cerca de la superficie.

Arthrodesis of the thumb interphalangeal joint and finger distal interphalangeal joints with a headless compression screw.

PubMed

Cox, Christopher; Earp, Brandon E; Floyd, W Emerson; Blazar, Philip E

2014-01-01

To study the results of using a small, headless compression screw (AcuTwist) for thumb interphalangeal (IP) joint and finger distal interphalangeal (DIP) joint arthrodeses. Between November 2007 and January 2012, 48 primary arthrodeses of the thumb IP joint or DIP joint in the other digits were performed in 29 consecutive patients with AcuTwist devices. Indications for arthrodesis included 19 cases of osteoarthritis in 25 fingers, 3 cases of lupus in 9 fingers, 2 cases of post-traumatic osteoarthritis in 2 fingers, and 1 case and finger each of acute trauma, neuromuscular disorder, postinfectious osteoarthritis, boutonniere deformity, and Dupuytren contracture. Charts were reviewed for clinical data, and radiographs were assessed for alignment and healing. Age averaged 59 years and follow-up averaged 12 months (range, 2-50 mo). Union occurred in 43 out of 46 fingers (94%). There were no cases of nail deformity, wound complications, tip hypersensitivity, or clinically notable malalignment. Three arthrodeses failed to fuse, including 2 asymptomatic nonunions and 1 fixation loss requiring revision with autograft. The complication rate was 9%. Distal digital joint arthrodesis with the AcuTwist resulted in a fusion rate of 94% with a complication rate of 9%. Our rate of fusion compares favorably with prior series using other methods of fixation. Therapeutic IV. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Gabapentin Extended-Release - Depomed: Gabapentin ER, Gabapentin Gastric Retention, Gabapentin GR.

PubMed

2007-01-01

Depomed is developing an extended-release (ER) oral formulation of gabapentin, a GABA receptor agonist commonly used for the treatment of epilepsy and seizures, neuropathic pain and hot flushes. Gabapentin ER is based on the company's proprietary AcuForm drug delivery technology, which is part of the Gastric Retention (GR) family of technologies; this offers improved drug absorption and bioavailability compared with the existing immediate-release formulation of gabapentin (Neurontin), making gabapentin ER suitable for twice-daily dosing. The product is in clinical development for the treatment of postherpetic neuralgia and diabetic neuropathies in the US. Additionally, Depomed has commenced a phase II trial of gabapentin ER in postmenopausal patients with hot flushes. Depomed's AcuForm platform is based on polymer technology that provides targeted drug delivery for a variety of compounds. Following ingestion, AcuForm tablets swell and are retained for 6-8 hours in the stomach, enabling controlled and prolonged release of gabapentin to the upper intestinal tract; this extends the time of drug delivery to the small intestine for complete and safe elimination via the lower intestinal track. Gabapentin ER is available for licensing. Depomed acquired exclusive development and commercialisation rights to gabapentin ER in September 2003 via its subsidiary, Depomed Development Ltd (DDL). Depomed is not required to pay upfront license fees, but will make royalty and milestone payments to DDL upon successful commercialisation of gabapentin ER. Gabapentin ER was originally developed by DDL, a joint venture between Depomed and Elan established in January 2000 to design products using the GR family of technologies. However, in efforts to restructure joint venture relationships, Elan withdrew from operational involvement of DDL in September 2003, and Depomed has gained full ownership of DDL. Depomed sublicensed exclusive rights to a US patent (held by the University of Rochester) covering the use of gabapentin in the treatment of hot flushes from PharmaNova in October 2006. Under the agreement, Depomed paid PharmaNova an upfront fee of US dollars 500 000. PharmaNova is also entitled to milestone payments and royalties on sales of gabapentin ER in this indication only. Depomed has reported significant safety and efficacy benefits from gabapentin ER in its phase II trial. This study was initiated in February 2005 following positive results from a phase I trial in which gabapentin ER demonstrated a pharmacokinetic profile suitable for twice-daily dosing. In two pharmacokinetic studies, gabapentin ER achieved improved bioavailability at higher doses. This result supports Depomed's development of a once- or twice-daily product with potentially fewer adverse events. The basic US patents relating to gabapentin expired in 2000. Depomed holds exclusive rights to a US patent (No. 6 310 098) held by the University of Rochester covering the use of gabapentin to treat hot flushes.Additionally, Depomed was issued a US patent (No. 6 723 340) in May 2004 that covers proprietary polymer combinations (as used in AcuForm tablets) to create improved formulations of existing drugs.

[Try to discuss manipulation of the "Feijing Zouqi" needling technique].

PubMed

Zhou, Dan; Gao, Ying; Wang, Fu-chun

2008-03-01

Based on description of "Feijing Zouqi" needling methods in Jin Zhen Fu (Rhyme Prose of Golden Needle) written by Xu Feng, and explain and analyze the descriptions of "Feijing Zouqi" needling method in Zhenjiu Juying (A Collection of Gems in Acu-Moxibustion) written by Gao Wu, Zhenjiu Wendui written by Wang Ji, Zhenjiu Dacheng (Great Compendium on Acu-Moxibustion) written by Yang Ji-zhou, Yixue Rumen (Elementary Medicine) written by LI Chan and many other works, summarize the technique characteristics of all the "Feijing Zouqi" needling methods. The characteristic of "Qinglong Baiwei" needling method is " first toward the left, then toward the right, slowly move or adjust with the hand"; and "Baihu Yaotou" needling method emphasizes "Tuifang Jinyuan" and "Yaozhen "; key point of "Canggui Tanxue" needling method is "Zuanti Sifang"; Chifeng Yingyuan" needling method emphasizes "Siwei Feixuan".

The Pliocene Yafo Formation in Israel: Hydrogeologically inert or active?

NASA Astrophysics Data System (ADS)

Avisar, D.; Rosenthal, E.; Shulman, H.; Zilberbrand, M.; Flexer, A.; Kronfeld, J.; Ben Avraham, Z.; Fleischer, L.

For several decades the ``Saqiye beds'' (later renamed Yafo Formation) underlying the Coastal Plain aquifer (Kurkar Group) aquifer of Israel, were regarded as an extremely thick, tectonically undisturbed, and absolutely impervious aquiclude. Following intensive groundwater exploitation from the overlying Kurkar Group aquifer, brackish and saline waters were locally encountered in the lower parts of this aquifer and always at the contact with the underlying Yafo Formation aquiclude. The present study revealed that this aquiclude is not a uniform and impervious rock unit, but rather an alternation of pervious and impervious strata within the Yafo Formation containing highly pressured fluids of different - mostly high - salinities. The permeable beds are at an angular unconformity and in direct contact with the overlying Kurkar Group aquifer. The Yafo Formation and the underlying and overlying rock units are dislocated by numerous fault systems, which facilitate accessibility of brines into the Kurkar Group aquifer. The mobilization of the saline fluids and their injection into the Kurkar Group aquifer could be due either to diffusion of saline fluids occurring in the permeable horizons of the Petah Tiqva Member through the clays of the Yafo Formation or to their upconing following intensive pumping in the Coastal Plain aquifer. It could have also been caused by up-dip movement of saline water as the result of overpressure generated by major accumulation of gas in the permeable horizons. Another possible mechanism could be hydraulic contact with pressurized brines up-flowing along fault zones from deep-seated Jurassic or Cretaceous reservoirs. The squeezing of saline interstitial water from the clays of the Yafo Formation into the overlying Kurkar Group aquifer, is of secondary importance for groundwater salinization (its input is comparable with salt input from rain). Depuis longtemps, les «couches de Saqiye», nommées maintenant formation de Yafo, constituant le mur de l'aquifère côtier (série de Kurkar) d'Israël, ont été considérées comme un ensemble extrêmement épais, sans déformation tectonique et totalement imperméable. À la suite de l'exploitation intensive de l'eau souterraine de l'aquifère sus-jacent de la série de Kurkar, des eaux salées et des saumures sont rencontrées occasionnellement dans les parties les plus profondes de cet aquifère et toujours au contact de l'imperméable sous-jacent de la formation de Yafo. Cette étude a révélé que cet imperméable n'est pas une unité géologique uniforme et imperméable, mais qu'il s'agit plutôt d'une alternance de couches perméables et imperméables dans la formation de Yafo contenant des fluides sous des pressions fortes avec des salinités différentes (?) et en général élevées (?). Les niveaux perméables sont en discordance angulaire et en contact direct avec l'aquifère sus-jacent de la série de Kurkar. La formation de Yafo et les unités géologiques situées dessous et dessus sont disloquées par de nombreuses systèmes de failles, qui facilitent le passage des saumures dans l'aquifère de la série de Kurkar. La mobilisation des fluides salins et leur injection dans l'aquifère de Kurkar pourraient être dues soit à la diffusion des fluides salins dans les horizons perméables du Petah Tiqva au travers des argiles de la formation de Yafo, soit leur remontée par upconing sous l'effet de pompages intensifs dans l'aquifère de la plaine côtière. Il peut aussi être causé par la remontée des eaux salines selon le pendage sous l'effet d'une surpression provoquée par une accumulation considérable de gaz dans les horizons imperméables. Un autre mécanisme possible pourrait être un contact hydraulique avec des saumures sous pression, remontant le long des zones de faille depuis des réservoirs profonds jurassiques ou crétacés. L'expulsion d'eau saline interstitielle des argiles de la formation de Yafo dans l'aquifère de Kurkar est d'importance secondaire pour la salinisation de l'eau souterraine cet apport est comparable à celui de sels par les pluies. Durante décadas, las ``Saqiyebeds'' (rebautizadas como Formación Yafo) que se sitúan bajo el acuífero Costero (Grupo Kurkar) de Israel fueron consideradas como un acuicludo extremadamente potente, tectónicamente inalterado y totalmente impermeable. Como resultado de la explotación intensiva del Grupo Kurkar, se produjo la mezcla de aguas salobres y salinas en la zona inferior de dicho acuífero y siempre en el contacto con el acuicludo subyaciente de la Formación Yafo. Este estudio reveló que el acuicludo no es una unidad rocosa uniforme e impermeable, sino que consiste en una alternancia de estratos permeables e impermeables dentro de la Formación Yafo, que contiene fluidos a alta presión de salinidades diferentes pero generalmente elevadas. Las capas permeables se hallan en inconformidad angular y en contacto directo con el acuífero superior del Grupo Kurkar. La Formación Yafo y las unidades rocosas infra- y suprayacentes están dislocadas por numerosos sistemas de fallas, lo que facilita el acceso de las salmueras al acuífero del Grupo Kurkar. Los fluidos de los horizontes permeables del Miembro Petah Tiqva a través de las arcillas de la Formación Yafo o hacia el ascenso de los domos salinos en respuesta a la extracción intensiva en el acuífero del Llano Costero. Podría también haber sido causado por el movimiento a favor del buzamiento de las aguas salinas como resultado de la sobrepresión generada por una acumulación mayor de gas en los horizontes permeables. Otro posible mecanismo podría basarse en el contacto hidráulico con salmueras presurizadas, que fluyen hacia arriba a favor de zonas de falla desde los reservorios profundos del Jurásico o del Cretácico. La extracción de agua salina intersticial desde las arcillas de la Formación Yafo hacia el acuífero superior del Grupo Kurkar es de importancia secundaria para la salinización de las aguas subterráneas, ya que su aportación es comparable a la procedente del agua de lluvia.

Installation Restoration Program (IRP) Stage 7, Remedial Investigation/ Feasibility Study Comprehensive CERCLA Work PLan for McClellan AFB/EM, McClellan AFB, California

DTIC Science & Technology

1991-07-01

Systems Audits ; Preventive Maintenance; Data Assessment Procedures; Corrective Action; Quality Assurance Reports; and Site Management. General Data Quality...for verification and quality control audits . A copy of the QAPP will be in the possession of field sampling teams for all sampling efforts...L cc- acca C wi w-C P-3-- C I- usu 2; - at C4~~2 Q (( c ccc c-c C- 0L U -C 3- au S - - C3 . - acu tr - -a CL.43 C LU -C2 -C ul 0it S w- -C u Ocw - z i

77 FR 60509 - Endangered and Threatened Wildlife and Plants; 12-Month Finding for the Lemmon Fleabane...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

...We, the U.S. Fish and Wildlife Service (Service), announce a 12-month finding on a petition to list as an endangered or threatened species Erigeron lemmonii (Lemmon fleabane). After a review of the best available scientific information we find that listing the Lemmon fleabane as an endangered or threatened species is no longer warranted, and therefore we are removing this species from the candidate list. We propose to list Echinomastus erectocentrus var. acunensis (acu[ntilde]a cactus) and Pediocactus peeblesianus var. fickeiseniae (Fickeisen plains cactus) as an endangered species, and we propose to designate critical habitat for both cactus species under the Endangered Species Act of 1973, as amended (Act). If finalized, the effect of these regulations would be to add acu[ntilde]a cactus and Fickeisen plains cactus to the List of Endangered and Threatened Plants and to designate critical habitat for these species.

Evaluation of an autochthonous starter culture on the production of a traditional dry fermented sausage from Chaco (Argentina) at a small-scale facility.

PubMed

Palavecino Prpich, Noelia Z; Garro, Oscar A; Romero, Mara; Judis, María A; Cayré, María E; Castro, Marcela P

2016-05-01

The performance of a mixed starter culture, SAS-1, comprised of the autochthonous strains Lactobacillus sakei ACU-2 and Staphylococcus vitulinus ACU-10, was evaluated into the production process of a traditional dry sausage. Microbiological, physicochemical and sensory analyses were carried out to accomplish this goal. Results showed an improvement in performance through the introduction of SAS-1; adding mixed starter culture rapidly decreased pH, inhibited the growth of contaminant microorganisms and enhanced the beneficial ones, diminished TBARS, and highlighted color and aroma attributes. However, most influential organoleptic descriptors among consumer acceptance were not affected by the addition of the starter. This starter culture would represent a valuable tool to improve the homogeneity of artisanal manufacture of this traditional food. Copyright © 2016 Elsevier Ltd. All rights reserved.

Design of a novel freeform lens for LED uniform illumination and conformal phosphor coating.

PubMed

Hu, Run; Luo, Xiaobing; Zheng, Huai; Qin, Zong; Gan, Zhiqiang; Wu, Bulong; Liu, Sheng

2012-06-18

A conformal phosphor coating can realize a phosphor layer with uniform thickness, which could enhance the angular color uniformity (ACU) of light-emitting diode (LED) packaging. In this study, a novel freeform lens was designed for simultaneous realization of LED uniform illumination and conformal phosphor coating. The detailed algorithm of the design method, which involves an extended light source and double refractions, was presented. The packaging configuration of the LED modules and the modeling of the light-conversion process were also presented. Monte Carlo ray-tracing simulations were conducted to validate the design method by comparisons with a conventional freeform lens. It is demonstrated that for the LED module with the present freeform lens, the illumination uniformity and ACU was 0.89 and 0.9283, respectively. The present freeform lens can realize equivalent illumination uniformity, but the angular color uniformity can be enhanced by 282.3% when compared with the conventional freeform lens.

Atlas of Iberian water beetles (ESACIB database).

PubMed

Sánchez-Fernández, David; Millán, Andrés; Abellán, Pedro; Picazo, Félix; Carbonell, José A; Ribera, Ignacio

2015-01-01

The ESACIB ('EScarabajos ACuáticos IBéricos') database is provided, including all available distributional data of Iberian and Balearic water beetles from the literature up to 2013, as well as from museum and private collections, PhD theses, and other unpublished sources. The database contains 62,015 records with associated geographic data (10×10 km UTM squares) for 488 species and subspecies of water beetles, 120 of them endemic to the Iberian Peninsula and eight to the Balearic Islands. This database was used for the elaboration of the "Atlas de los Coleópteros Acuáticos de España Peninsular". In this dataset data of 15 additional species has been added: 11 that occur in the Balearic Islands or mainland Portugal but not in peninsular Spain and an other four with mainly terrestrial habits within the genus Helophorus (for taxonomic coherence). The complete dataset is provided in Darwin Core Archive format.

Atlas of Iberian water beetles (ESACIB database)

PubMed Central

Sánchez-Fernández, David; Millán, Andrés; Abellán, Pedro; Picazo, Félix; Carbonell, José A.; Ribera, Ignacio

2015-01-01

Abstract The ESACIB (‘EScarabajos ACuáticos IBéricos’) database is provided, including all available distributional data of Iberian and Balearic water beetles from the literature up to 2013, as well as from museum and private collections, PhD theses, and other unpublished sources. The database contains 62,015 records with associated geographic data (10×10 km UTM squares) for 488 species and subspecies of water beetles, 120 of them endemic to the Iberian Peninsula and eight to the Balearic Islands. This database was used for the elaboration of the “Atlas de los Coleópteros Acuáticos de España Peninsular”. In this dataset data of 15 additional species has been added: 11 that occur in the Balearic Islands or mainland Portugal but not in peninsular Spain and an other four with mainly terrestrial habits within the genus Helophorus (for taxonomic coherence). The complete dataset is provided in Darwin Core Archive format. PMID:26448717

Coenzyme Q10 plus Multivitamin Treatment Prevents Cisplatin Ototoxicity in Rats

PubMed Central

Astolfi, Laura; Simoni, Edi; Valente, Filippo; Ghiselli, Sara; Hatzopoulos, Stavros; Chicca, Milvia; Martini, Alessandro

2016-01-01

Cisplatin (Cpt) is known to induce a high level of oxidative stress, resulting in an increase of reactive oxygen species damaging the inner ear and causing hearing loss at high frequencies. Studies on animal models show that antioxidants may lower Cpt-induced ototoxicity. The aim of this study is to evaluate the ototoxic effects of two different protocols of Cpt administration in a Sprague-Dawley rat model, and to test in the same model the synergic protective effects of a solution of coenzyme Q10 terclatrate and Acuval 400®, a multivitamin supplement containing antioxidant agents and minerals (Acu-Qter). The Cpt was administered intraperitoneally in a single dose (14 mg/kg) or in three daily doses (4.6 mg/kg/day) to rats orally treated or untreated with Acu-Qter for 5 days. The auditory function was assessed by measuring auditory brainstem responses from 2 to 32 kHz at day 0 and 5 days after treatment. Similar hearing threshold and body weight alterations were observed in both Cpt administration protocols, but mortality reduced to zero when Cpt was administered in three daily doses. The Acu-Qter treatment was able to prevent and completely neutralize ototoxicity in rats treated with three daily Cpt doses, supporting the synergic protective effects of coenzyme Q terclatrate and Acuval 400® against Cpt-induced oxidative stress. The administration protocol involving three Cpt doses is more similar to common human chemotherapy protocols, therefore it appears more useful for long-term preclinical studies on ototoxicity prevention. PMID:27632426

HIT or miss? A comprehensive contemporary investigation of laboratory tests for heparin induced thrombocytopenia.

PubMed

Favaloro, Emmanuel J; McCaughan, Georgia; Mohammed, Soma; Lau, Kun Kan Edwin; Gemmell, Rosalie; Cavanaugh, Lauren; Donikian, Dea; Kondo, Mayuko; Brighton, Timothy; Pasalic, Leonardo

2018-04-17

Heparin induced thrombocytopenia (HIT) is a rare but potentially fatal complication of heparin therapy, which in a proportion of patients causes platelet activation and thrombosis. Initial clinical assessment of the likelihood of HIT is facilitated by laboratory testing to confirm or exclude HIT. This prospective investigation was performed over an 18-month period, and has involved testing of over 300 test samples from over 100 consecutive patients. Clinical assessment by 4T score was supplemented by laboratory tests that comprised both immunological [lateral flow ('STiC'), chemiluminescence (AcuStar; HIT-IgG (PF4-H) ), ELISA (Asserachrom HPIA IgG)] and functional assays [SRA, platelet aggregation using whole blood ('Multiplate') and platelet rich plasma ('LTA')]. We observed both false positive and false negative test findings with most assays. Overall, the whole blood aggregation method provided a reasonable alternative to SRA for identifying functional HIT. STiC, AcuStar and ELISA procedures were fairly comparable in terms of screening for HIT, although STiC and AcuStar both yielded false negatives, albeit also resulting in fewer false positives than ELISA. The 4T score had less utility in our patient cohort than we were expecting, although there was an association with the likelihood of HIT. Nevertheless, we accept that our observations are based on limited test numbers. In conclusion, no single approach (clinical or laboratory) was associated with optimal sensitivity or specificity of HIT exclusion or identification, and thus, a combination of clinical evaluation and laboratory testing will best ensure the accuracy of diagnosis. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Aquifer overexploitation: what does it mean?

NASA Astrophysics Data System (ADS)

Custodio, Emilio

2002-02-01

Groundwater overexploitation and aquifer overexploitation are terms that are becoming common in water-resources management. Hydrologists, managers and journalists use them when talking about stressed aquifers or some groundwater conflict. Overexploitation may be defined as the situation in which, for some years, average aquifer ion rate is greater than, or close to the average recharge rate. But rate and extent of recharge areas are often very uncertain. Besides, they may be modified by human activities and aquifer development. In practice, however, an aquifer is often considered as overexploited when some persistent negative results of aquifer development are felt or perceived, such as a continuous water-level drawdown, progressive water-quality deterioration, increase of ion cost, or ecological damage. But negative results do not necessarily imply that ion is greater than recharge. They may be simply due to well interferences and the long transient period that follow changes in the aquifer water balance. Groundwater storage is depleted to some extent during the transient period after ion is increased. Its duration depends on aquifer size, specific storage and permeability. Which level of "aquifer overexploitation" is advisable or bearable, depends on the detailed and updated consideration of aquifer-development effects and the measures implemented for correction. This should not be the result of applying general rules based on some indirect data. Monitoring, sound aquifer knowledge, and calculation or modelling of behaviour are needed in the framework of a set of objectives and policies. They should be established by a management institution, with the involvement of groundwater stakeholders, and take into account the environmental and social constraints. Aquifer overexploitation, which often is perceived to be associated with something ethically bad, is not necessarily detrimental if it is not permanent. It may be a step towards sustainable development. Actually, the term aquifer overexploitation is mostly a qualifier that intends to point to a concern about the evolution of the aquifer-flow system in some specific, restricted points of view, but without a precise hydrodynamic meaning. Implementing groundwater management and protection measures needs quantitative appraisal of aquifer evolution and effects based on detailed multidisciplinary studies, which have to be supported by reliable data. Resumé. La surexploitation de l'eau souterraine et la surexploitation des nappes sont des termes qui deviennent d'usage commun en gestion de l'eau. Plusieurs hydrologues, aménageurs et journalistes en font usage quand on parle d'une nappe exploitée intensivement et qui présente des situations conflictives. On peut définir la surexploitation comme étant la situation dans laquelle l'extraction moyenne d'eau souterraine est plus grande ou proche de la recharge moyenne pendant quelques années. Mais le taux ansi que la surface de cette recharge sont souvent tres incertains et peuvent changer dûs a des activitées humaines et à l'exploitation de la nappe elle-méme. Du point de vue pratique on souvent considère qu'il y a surexploitation quand on observe or on s'aperçoit de certains résultats négatifs de l'exploitation, tels qu'une diminution continue du niveau de l'eau, une detérioration de sa qualité, une augmentation du coût d' extraction, ou dommages écologiques. Mais ces effets négatifs n' impliquent pas nécessairement que l'extraction soit plus grande que la recharge. Ils peuvent étre simplement le résultat d'interférences ou d'une longue période transitoire qui suivent les changements dans les termes du bilan hydrique. Cette période transitoire a une durée que dépend de la taille de la nappe, et de son coefficient d' emmagasinement et de sa perméabilité. Les extractions d'eau de la nappe comportent une diminution de l'emmagasinement d'eau souterraine pendant le période transitoire. A fin de pouvoir décider du degré de "surexploitation de la nappe" conseillé ou admisible on a besoin de la description detaillée et à jour des effets de l'exploitation et des mesures de correction adoptées. Cette décision ne peut pas étre prise uniquement à partir de regles générales et l'appui de quelques observations indirectes. On a besoin de controle, d'une bonne connaissance de la nappe, et de calculer ou modeliser le comportement, en faisant appel à l'ensemble des objectifs et politiques établies par une institution de gestion, avec l'implication des personnes qui sont intéressées par l'eau souterraine, et tenant compte des conditions environmentales et sociales. La surexploitation de nappes, qui souvent est associée a quelque chose éthiquement nocive, n'est pas necessairement ainsi pendant un certain temps, et peut être une étape dans l'évolution vers un développement durable. Réellement la designation de surexploitation de nappes est surtout un adjectif que a pour but de qualifier une évolution préoccupante sous certains points de vue, mais sans une signification hydrodynamique précise. Pour adopter des mesures de gestion et protection, on a besoin de l'évaluation quantitative de l'évolution de la nappe et de ses effets, ce qui doit déboucher sur des études detaillées dans un contexte multidisciplinaire, et sur de bonnes données. Resumen. La sobreexpolotación del agua subterránea y la sobreexplotacion de acuíferos son conceptos que se están convirtiendo en términos de uso común en gestión hídrica. Muchos hidrólogos, gestores y periodistas las usan para referirse a un acuífero explotado intensamente o que presenta situaciones conflictivas. La sobreexplotación se puede definir como la situación en la que durante varios años la extracción media de agua subterránea de un acuífero supera o se aproxima a la recarga media. Pero la tasa y también la superficie sobre la que se realiza esta recarga son a menudo muy inciertas, y pueden cambiar por actividades humanas y por la propia explotación del acuífero. Sin embargo, en la práctica se suele considerar que hay sobreexplotación cuando se observan o se perciben ciertos resultados negativos de la explotación, tales como un descenso continuado del nivel del agua, un deterioro de su calidad, un encarecimiento del agua extraída, o daños ecológicos. Pero estos efectos no están necesariamente relacionados con el hecho de que la extracción sea mayor que la recarga, puesto que pueden ser simplemente el resultado de interferencias o del dilatado período transitorio que sigue a los cambios en los términos del balance de agua, y cuya duración depende del tamaño del acuífero, y de su permeabilidad y coeficiente de almacenamiento. Las extracciones del acuífero suponen una disminución del almacenamiento de agua subterránea durante este periodo transitorio. Para decidir que grado de "sobreexplotación del acuífero" es aconsejable o admisible hace falta la consideración detallada y actualizada de los efectos de la explotación y las medidas de corrección que se adopten. Para esa decisión no basta con reglas generales y el apoyo de algunas observaciones indirectas. Se necesitan observaciones de control, buen conocimiento del acuífero y cálculos o modelación del comportamiento, y todo ello en el marco de un conjunto de objetivos y políticas establecidas por una institución de gestión, con la implicación de aquellos que tienen un interés en el agua subterránea, y teniendo en cuenta los condicionantes ambientales y sociales. La sobreexplotación de acuíferos, que con frecuencia suele asociarse a algo éticamente malo, no tiene por qué ser necesariamente así durante cierto tiempo, sino una etapa en la evolución hacia un desarrollo sustentable. En la realidad la designación de sobreexplotación de acuíferos es principalmente un adjetivo que trata de calificar a una evolución preocupante bajo determinados puntos de vista, sin que tenga una significación hidrodinámica precisa. Para adoptar medidas de gestión y de protección se necesita la evaluación cuantitativa de la evolución del acuífero y sus efectos, que se derivan de estudios de detalle en un contexto multidisciplinar y de datos fiables.

Efficient simulation of press hardening process through integrated structural and CFD analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palaniswamy, Hariharasudhan; Mondalek, Pamela; Wronski, Maciek

Press hardened steel parts are being increasingly used in automotive structures for their higher strength to meet safety standards while reducing vehicle weight to improve fuel consumption. However, manufacturing of sheet metal parts by press hardening process to achieve desired properties is extremely challenging as it involves complex interaction of plastic deformation, metallurgical change, thermal distribution, and fluid flow. Numerical simulation is critical for successful design of the process and to understand the interaction among the numerous process parameters to control the press hardening process in order to consistently achieve desired part properties. Until now there has been no integratedmore » commercial software solution that can efficiently model the complete process from forming of the blank, heat transfer between the blank and tool, microstructure evolution in the blank, heat loss from tool to the fluid that flows through water channels in the tools. In this study, a numerical solution based on Altair HyperWorks® product suite involving RADIOSS®, a non-linear finite element based structural analysis solver and AcuSolve®, an incompressible fluid flow solver based on Galerkin Least Square Finite Element Method have been utilized to develop an efficient solution for complete press hardening process design and analysis. RADIOSS is used to handle the plastic deformation, heat transfer between the blank and tool, and microstructure evolution in the blank during cooling. While AcuSolve is used to efficiently model heat loss from tool to the fluid that flows through water channels in the tools. The approach is demonstrated through some case studies.« less

Professor's Page: Do Demonstration Lessons Work?

ERIC Educational Resources Information Center

Clarke, Doug

2011-01-01

As part of a large research and professional development project funded by the Catholic Education Office Melbourne (CEOM), called "Contemporary Teaching and Learning of Mathematics," the ACU team has been leading demonstration lessons. There is certainly not universal agreement on the worth of demonstration lessons in the mathematics…

Variations in hydraulic conductivity with scale of measurement during aquifer tests in heterogeneous, porous carbonate rocks

NASA Astrophysics Data System (ADS)

Schulze-Makuch, Dirk; Cherkauer, Douglas S.

Previous studies have shown that hydraulic conductivity of an aquifer seems to increase as the portion of the aquifer tested increases. To date, such studies have all relied on different methods to determine hydraulic conductivity at each scale of interest, which raises the possibility that the observed increase in hydraulic conductivity is due to the measurement method, not to the scale. This study analyzes hydraulic conductivity with respect to scale during individual aquifer tests in porous, heterogeneous carbonate rocks in southeastern Wisconsin, USA. Results from this study indicate that hydraulic conductivity generally increases during an individual test as the volume of aquifer impacted increases, and the rate of this increase is the same as the rate of increase determined by using different measurement methods. Thus, scale dependence of hydraulic conductivity during single tests does not depend on the method of measurement. This conclusion is supported by 22 of 26 aquifer tests conducted in porous-flow-dominated carbonate units within the aquifer. Instead, scale dependency is probably caused by heterogeneities within the aquifer, a conclusion supported by digital simulation. All of the observed types of hydraulic-conductivity variations with scale during individual aquifer tests can be explained by a conceptual model of a simple heterogeneous aquifer composed of high-conductivity zones within a low-conductivity matrix. Résumé Certaines études ont montré que la conductivité hydraulique d'un aquifère semble augmenter en même temps que la partie testée de l'aquifère s'étend. Jusqu'à présent, ces études ont toutes reposé sur des méthodes de détermination de la conductivité hydraulique différentes pour chaque niveau d'échelle, ce qui a conduit à penser que l'augmentation observée de la conductivité hydraulique pouvait être due aux méthodes de mesure et non à l'effet d'échelle. Cette étude analyse la conductivité hydraulique par rapport au niveau d'échelle au cours d'essais de nappe individuels, dans des roches carbonatées poreuses, hétérogènes du sud-est du Wisconsin (Etats-Unis). Les résultats obtenus indiquent que la conductivité hydraulique augmente en général au cours d'un essai individuel en même temps que le volume d'aquifère concerné augmente, et que le taux d'augmentation est le même que celui déterminé en utilisant différentes méthodes de mesures. Ainsi, le fait que la conductivité hydraulique dépende de l'échelle d'observation au cours d'essais uniques ne résulte pas de la méthode de mesure. Cette conclusion est confirmée par 22 essais de nappe sur 26 entrepris dans des unités carbonatées àécoulement poreux dominant dans l'aquifère. En revanche, cette dépendance du niveau d'échelle est probablement due aux hétérogénéités existant dans l'aquifère, conclusion confortée par une simulation. Tous les types de variations de conductivité hydraulique en fonction de l'échelle au cours d'essais de nappe peuvent être expliqués par un modèle conceptuel d'aquifère hétérogène simple constitué par des zones à forte conductivitéà l'intérieur d'une matrice à faible conductivité. Resumen Estudios previos han mostrado que la conductividad hidráulica (K) de un acuífero parece crecer con el volumen ensayado. Hasta ahora, estos estudios se han basado en la utilización de métodos distintos para la determinación de la conductividad hidráulica a cada escala de interés, lo que hace pensar en la posibilidad de que este aumento observado sea debido a la variación en el método de medida y no al cambio de escala. Este estudio analiza el valor de K en función de la escala a partir de ensayos individuales en rocas carbonatadas heterogéneas y porosas al sudeste de Wisconsin, EEUU. Los resultados de este estudio indican que la K obtenida en ensayos individuales crece generalmente al aumentar el volumen de acuífero implicado en el ensayo, y que la tasa de crecimiento es la misma que se determinaría usando diferentes métodos. Por tanto, la dependencia de la conductividad hidráulica con la escala en ensayos aislados no depende del método de medida. Esta conclusión está refrendada por 22 de los 26 ensayos llevados a cabo en las unidades carbonatadas más porosas del acuífero. Por el contrario, la dependencia con la escala está causada probablemente por las heterogeneidades en el propio acuífero, lo que se corrobora con simulaciones digitales. Todos los tipos de variaciones de K con la escala observados para los ensayos individuales se pueden explicar mediante un modelo conceptual simple que supone un acuífero heterogéneo compuesto por zonas de alta conductividad embebidas en una matriz poco conductiva.

Validating Personal Well-Being Experiences at School: A Quantitative Examination of Secondary School Students

ERIC Educational Resources Information Center

Phan, Huy P.; Ngu, Bing H.

2015-01-01

Progress in education has involved, to a large extent, a focus on individuals' well-being experiences at school (ACU and Erebus International, 2008; Fraillon, 2004). This line of inquiry has produced extensive findings, highlighting the diverse coverage and scope of this psychosocial theoretical orientation. We recently developed a theoretical…

Provision of Auricular Acupuncture and Acupressure in a University Setting

ERIC Educational Resources Information Center

Oyola-Santiago, Tamara; Knopf, Rachel; Robin, Tracy; Harvey, Kristen

2013-01-01

Auricular acupuncture using the National Acupuncture Detoxification Association (NADA) protocol stimulates 5 points in each ear--the Shen Men, sympathetic nervous system, liver, kidney, and lung. This protocol is also known as Acu Detox, and has been used for recovery in community-based settings and drug use treatment programs. It has also been…

78 FR 59409 - In the Matter of AcuNetx, Inc., Alliance Pharmaceutical Corp., BBV Vietnam SE.A. Acquisition Corp...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-26

... Pharmaceutical Corp., BBV Vietnam SE.A. Acquisition Corp., Cash Technologies, Inc., Conspiracy Entertainment... that there is a lack of current and accurate information concerning the securities of Cash Technologies... concerning the securities of Conspiracy Entertainment Holdings, Inc. because it has not filed any periodic...

Combined Atropine and 2-PAM Cl Effects on Tracking Performance and Visual, Physiological, and Psychological Functions

DTIC Science & Technology

1988-12-01

tracking task reveals the magnitude Akitrihm. Spare. and Environmental Medicine • December. I$ II I ANTIDOTE EFFECTS--PEN ETAR ET AL. and duration of the... marihuana on dynamic visual acu- blood pressure following the combination of 2-PAM Cl ity: I. Threshold measurements. Perception Psychophys. 1975

Aquatic toxicity of petroleum products and dispersant agents determined under the U.S. EPA Oil Spill Research Program

EPA Science Inventory

The U.S. EPA Office of Research and Development has developed baseline data on the ecotoxicity of selected petroleum products and several chemical dispersants as part of its oil spills research program. Two diluted bitumens (dilbits) from the Alberta Tar Sands were tested for acu...

A Novel Method Using Abstract Convex Underestimation in Ab-Initio Protein Structure Prediction for Guiding Search in Conformational Feature Space.

PubMed

Hao, Xiao-Hu; Zhang, Gui-Jun; Zhou, Xiao-Gen; Yu, Xu-Feng

2016-01-01

To address the searching problem of protein conformational space in ab-initio protein structure prediction, a novel method using abstract convex underestimation (ACUE) based on the framework of evolutionary algorithm was proposed. Computing such conformations, essential to associate structural and functional information with gene sequences, is challenging due to the high-dimensionality and rugged energy surface of the protein conformational space. As a consequence, the dimension of protein conformational space should be reduced to a proper level. In this paper, the high-dimensionality original conformational space was converted into feature space whose dimension is considerably reduced by feature extraction technique. And, the underestimate space could be constructed according to abstract convex theory. Thus, the entropy effect caused by searching in the high-dimensionality conformational space could be avoided through such conversion. The tight lower bound estimate information was obtained to guide the searching direction, and the invalid searching area in which the global optimal solution is not located could be eliminated in advance. Moreover, instead of expensively calculating the energy of conformations in the original conformational space, the estimate value is employed to judge if the conformation is worth exploring to reduce the evaluation time, thereby making computational cost lower and the searching process more efficient. Additionally, fragment assembly and the Monte Carlo method are combined to generate a series of metastable conformations by sampling in the conformational space. The proposed method provides a novel technique to solve the searching problem of protein conformational space. Twenty small-to-medium structurally diverse proteins were tested, and the proposed ACUE method was compared with It Fix, HEA, Rosetta and the developed method LEDE without underestimate information. Test results show that the ACUE method can more rapidly and more efficiently obtain the near-native protein structure.

Home Pregnancy Test Kits: How Readable Are the Instructions?

ERIC Educational Resources Information Center

Holcomb, Carol Ann

At the conclusion of their study on home pregnancy test kits, Valinas and Perlman (1982) suggested that the instructions accompanying the kits be revised to make them easier to read. A study was undertaken to determine the readability of the printed instructions accompanying five home pregnancy test kits (Daisy II, Answer, Acu-Test, Predictor, and…

Developing Communities of Practice around e-Learning and Project Management

ERIC Educational Resources Information Center

Laxton, Ruth; Applebee, Andrelyn Cheryl

2010-01-01

In 2007-8 the Australian Catholic University (ACU National), undertook a project to develop new resources to provide training and support in eLearning for staff and students. The project was undertaken by a multidisciplinary team drawn from all six campuses and was led by an externally contracted Project Manager/eLearning specialist. This…

Proof-of-concept study: profile of circulating micro RNAs in bovine serum harvested during acute and persistent FMDV infection

USDA-ARS?s Scientific Manuscript database

Expression of 144 distinct bovine microRNAs (miRNAs) was quantified in bovine serum harvested during different phases of infection with foot-and-mouth disease virus (FMDV). There were marked differences in miRNA expression between acute, persistent, and convalescent phases of infection. During acu...

Copper speciation in sulfidic solutions at low sulfur activity: Further evidence for cluster complexes?

NASA Astrophysics Data System (ADS)

Thompson, Richard A.; Helz, George R.

1994-07-01

The solubility of two as0-buffering assemblages in the Cu-S system have been studied: chalcocite-djurleite (Cc-Dj) and anilite-covellite (An-Cv). Ion activity products, [Cu +]HS -] 1/2[H +] - 1/2 (25°C, I = 0) at equilibrium, derived from solubility measurements in penicillamine solutions, are 10 -17.01 ± 0.05 (Cc-Dj) and 10 -17.14 ± 0.10 (An-Cv), from which ΔG° f = -82.11 kJ/mol for Cc and -74.77 kJ/mol for An. In the An-Cv assemblage, aCu2S = 0.55 (2 σ = 0.2) vs. 1.00 in the Cc-containing assemblage. The difference in aCu2S between the two assemblages is used in a novel way to estimate stoichiometry of Cu-HS complexes. The solubility of both assemblages (0.7-0.01 M NaHS, pH 7-12.5, 25°C) can be fit with a model incorporating the same two chemical species, one containing an odd number of Cu atoms (Cu(HS) 2-3, CU 3S 4H 2-3, or a higher multimer) and the other containing an even number of Cu atoms (Cu 2S(HS) 22-, Cu 4S 4H 22-, etc.). The trimer-tetramer model fits the combined data for the two assemblages distinctly better than the monomer-dimer model, but this result is very sensitive to uncertainty in aCu2S. Along with EXAFS results, the weight of the evidence favors small cluster complexes (2-5 Cu atoms), but is inconclusive at the present level of resolution. Multimers can be rationalized because condensation of metal-centered monomers to clusters provides a means for soft acid/base elements to maintain favored coordination geometries at low ligand to metal ratios. Based on the fitting methods developed here, previous covellite solubility data from this laboratory are reinterpreted in terms of Cu 2S 2(HS) 33-, Cu 2S 3)(S 4) 2-, and Cu(S 9)S 10) 3-; the last of these could also be represented by the trimer, Cu 3(S 7) 33-, which is homologous with a known complex. With the measured equilibrium constants, the speciation of Cu in the sulfidic zone of the Black Sea is calculated. Covellite is the stable Cu-S mineral, but the sulfidic water column is vastly supersaturated with respect to it. Most of the sulfidic water column is modestly (2.5-5.5 times) supersaturated with respect to Cc, hinting that this mineral metastably controls ΣCu. The slight supersaturation suggests that Cc occurs as 10-100 nm particles.

Effects of acupuncture on peripheral T lymphocyte subpopulation and amounts of cerebral catecholamines in mice.

PubMed

Okumura, M; Toriizuka, K; Iijima, K; Haruyama, K; Ishino, S; Cyong, J C

1999-01-01

The aim of this study was to investigate the effects of acupuncture on peripheral lymphocyte subpopulations and cerebral catecholamines. In order to examine the effects of acupuncture, two experiments were performed. Experiment 1: Eighteen female mice (strain; C57BL/6) at the age of 7 weeks were divided three groups, (a) sham operated (control; n=6), (b) ovariectomized (OVX; n=6), and (c) ovariectomized and stimulated by subcutaneous needles on acupuncture point, Shenshu (BL23) at the both sides of the back for 20 days (OVX+Acu; n=6). These animals were sacrificed at 20 days after needle insertion, and the splenic lymphoid cells were examined by two-color flow cytometry, using monoclonal antibodies (mAb) to the cell surface antigens, CD3, CD4, CD8a and NK1.1 (CD56). In the ovariectomized (OVX) group, the peripheral CD4/CD8 ratio was significantly increased and the ratio of natural killer (NK) cells (CD3-NK1.1+; CD3 negative, NK1.1 positive) to T lymphocytes was decreased compared to the sham control group. In the ovariectomized with needle insertion (OVX+Acu) group, the CD4/CD8 ratio was reduced, but the NK cells ratio was not changed compared to the OVX group. Experiment 2: To investigate the acute effects of subcutaneous needle insertion, male C57BL/6 mice (7 weeks old) were used (n=6, each group). The acupuncture points Shen-shu (BL23) on the backs of the male mice were also stimulated by subcutaneous needles for 3 and 7 days. As a result, the CD4/CD8 ratio was significantly decreased at day 3 and day 7, compared to the control group. On the other hand the NK cells ratio and activated T-cells were increased at day 7. The mitogenic activities in the splenic lymphocytes were also increased by acupuncture stimulation at day 3. Catecholamine contents in the hippocampus were measured by high performance liquid chromatography with the electro-chemical detector (ECD-HPLC) method. No significant change was observed in either dopamine contents or norepinephrine; however, dopamine metabolite, homovanillic acid (HVA) and DOPAC (3,4-dihydroxyphenylacetic acid) were increased at day 3. The study suggests that acupuncture has effects on peripheral lymphocyte subpopulations and may modulate mitogenic activity. In addition, acupuncture may stimulate dopamine turnover.

Impact properties of zinc die cast alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrems, Karol K.; Dogan, Omer N.; Manahan, M.P.

2005-01-01

Alloys 3, 5, AcuZinc 5, and ZA-8 were tested at five temperatures between -40 C and room temperature to determine impact properties. Izod impact energy data was obtained in accordance with ASTM D256. Unlike ASTM E23, these samples were tested with a milled notch in order to compare with plastic samples. In addition, flexural data was obtained for design use.

Active commuting and sociodemographic factors among university students in Spain.

PubMed

Molina-García, Javier; Sallis, James F; Castillo, Isabel

2014-02-01

Commuting to university represents an opportunity to incorporate physical activity (walking or biking) into students' daily routines. There are few studies that analyze patterns of transport in university populations. This cross-sectional study estimated energy expenditure from active commuting to university (ACU) and examined sociodemographic differences in findings. The sample included 518 students with a mean age of 22.4 years (59.7% female) from 2 urban universities in Valencia, Spain. Time spent in each mode of transport to university and sociodemographic factors was assessed by self-report. Nearly 35% of the students reported walking or biking as their main mode of transport. ACU (min/wk) were highest for walkers (168) and cyclists (137) and lowest for motorbike riders (0.0) and car drivers (16). Public transport users, younger students, low socioeconomic status students, and those living ≤ 2 km from the university had higher energy expenditure from active commuting than comparison groups. Biking was highest among those living 2-5 km from the university. Our findings suggest that active commuting and public transit use generated substantial weekly energy expenditure, contributed to meeting physical activity recommendations, and may aid in obesity prevention.

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing.

PubMed

Sanabria, Sergio J; Furrer, Roman; Neuenschwander, Jürg; Niemz, Peter; Schütz, Philipp

2015-12-01

Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects. Copyright © 2015 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Usui, Fumihiko; Hasegawa, Sunao; Matsuhara, Hideo

We present an analysis of the albedo properties of main belt asteroids (MBAs) detected by the All-Sky Survey of the infrared astronomical satellite AKARI. The characteristics of 5120 asteroids detected by the survey, including their sizes and albedos, were cataloged in the Asteroid Catalog Using AKARI (AcuA). Size and albedo measurements were based on the standard thermal model, using inputs of infrared fluxes and absolute magnitudes measured at optical wavelengths. MBAs, which account for 4722 of the 5120 AcuA asteroids, have semimajor axes of 2.06-3.27 AU, except for the near-Earth asteroids. AcuA provides a complete data set of all MBAsmore » brighter than the absolute magnitude of H < 10.3, which corresponds to the diameter of d > 20 km. We confirmed that the albedo distribution of the MBAs is strongly bimodal as was already known from the past observations, and that the bimodal distribution occurs not only in the total population, but also within inner, middle, and outer regions of the main belt. The bimodal distribution in each group consists of low-albedo components in C-type asteroids and high-albedo components in S-type asteroids. We found that the small asteroids have much more variety in albedo than the large asteroids. In spite of the albedo transition process like space weathering, the heliocentric distribution of the mean albedo of asteroids in each taxonomic type is nearly flat. The mean albedo of the total, on the other hand, gradually decreases with an increase in semimajor axis. This can be explained by the compositional ratio of taxonomic types; that is, the proportion of dark asteroids such as C- and D-types increases, while that of bright asteroids such as S-type decreases, with increasing heliocentric distance. The heliocentric distributions of X-subclasses: E-, M-, and P-types, which can be divided based on albedo values, are also examined. P-types, which are the major component in X-types, are distributed throughout the main belt regions, and the abundance of P-types increases beyond 3 AU. This distribution is similar to that of C- or D-types.« less

Sustainable development and management of an aquifer system in western Turkey

NASA Astrophysics Data System (ADS)

Sakiyan, Jale; Yazicigil, Hasan

This study presents the establishment of sustainable development and management policies for the Küçük Menderes River Basin aquifer system in western Turkey. Geological, hydrogeological, and geophysical data are used conjunctively to define various hydrogeological units and their geometry. Distributions of hydraulic-parameter values and recharge are estimated by geostatistical methods and hydrologic simulations, respectively. A finite-difference groundwater flow model is used to represent the unconfined flow in the aquifer system. The model has been calibrated under steady state and transient conditions. The resulting model was used to test seven management scenarios for a planning period of 21 years to determine the so-called safe yield and sustainable yield of the aquifer system and to investigate the potential impacts of four planned surface water reservoirs on groundwater resources in the basin. The results demonstrate that the continuation of the present pumping rates exceeds both the safe yield and the sustainable yield of the aquifer system. Consequently, the growing need for irrigation water should be met by the construction of the planned surface water reservoirs and the implementation of efficient water management policies and plans. Cette étude présente la proposition d'une politique de développement et de gestion durables du système aquifère du bassin du Petit Mendérès dans l'ouest de la Turquie. Des données géologiques, hydrogéologiques et géophysiques ont été utilisées conjointement pour définir les différentes unités hydrogéologiques et leur géométrie. Les distributions des paramètres hydrauliques et de la recharge ont été estimées respectivement par des méthodes géostatistiques et des simulations hydrologiques. Un modèle d'écoulement souterrain aux éléments finis a été utilisé pour représenter l'écoulement non captif dans le système aquifère. Le modèle a été calibré dans des conditions de régimes permanent et transitoire. Le modèle résultant a servi à tester sept scénarios de gestion pour une période de programmation de 21 ans, afin de déterminer les débits de prélèvement sûr et durable dans le système aquifère et d'étudier les impacts potentiels de quatre réservoirs d'eau de surface en projet sur les eaux souterraines du bassin. Les résultats montrent que la poursuite des prélèvements au débit actuel excède aussi bien le débit d'exploitation de sécurité que celui durable pour le système aquifère. Par conséquent, les besoins croissants d'eau pour l'irrigation doivent être satisfaits par la construction des réservoirs projetés et par la mise en place de politiques et de plans de gestion de l'eau efficace. Este estudio presenta el establecimiento de políticas sustentables de desarrollo y gestión en el sistema acuífero de la cuenca del río Küçük Menderes, al Oeste de Turquía, para lo que se ha utilizado datos geológicos, hidrogeológicos y geofísicos de forma conjunta de cara a definir diversas unidades hidrogeológicas y su geometría. La distribución de los parámetros hidráulicos y de la recarga ha sido estimada mediante métodos geoestadísticos y simulaciones hidrológicas, respectivamente. Se ha empleado un modelo de las aguas subterráneas en diferencias finitas para representar el flujo no confinado en el sistema acuífero, el cual se ha calibrado bajo condiciones estacionarias y transitorias. El modelo resultante ha sido usado para contrastar siete escenarios de gestión durante un período de planificación de 21 años con el fin de determinar el punto de explotación segura y sustentable del sistema acuífero, así como para investigar los impactos potenciales sobre los recursos subterráneos de los cuatro embalses superficiales que se hallan en proyecto. Los resultados demuestran que el mantenimiento de las tasas actuales de extracción del acuífero supera tanto el régimen de bombeo seguro como el sustentable del sistema. Por consiguiente, se debería compensar la necesidad creciente de agua para riego con la construcción de los reservorios superficiales previstos y con la implementación de políticas y planes de gestión eficiente del agua.

Zinc alloy enhances strength and creep resistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Machler, M.

1996-10-01

A family of high-performance ternary zinc-copper-aluminum alloys has been developed that provides higher strength, hardness, and creep resistance than the traditional zinc-aluminum alloys Zamak 3, Zamak 5, and ZA-8. Designated ACuZinc, mechanical properties comparable to those of more expensive materials make it suitable for high-load applications and those at elevated temperatures. This article describes the alloy`s composition, properties, and historical development.

A New Method for Determining Permethrin Level on Military Uniform Fabrics

DTIC Science & Technology

2017-06-01

new desorption- gas chromatography–mass spectrometry based screening tool for permethrin content in military fabrics was developed. The method allows...SUBJECT TERMS permethrin, Army Combat Uniform, ACU, camouflage, desorption- gas chromatography-mass spectrometry, D-GC-MS 16. SECURITY CLASSIFICATION OF...and the permethrin contained in the specimens is extracted with solvent with a recovery rate of at least 95%. Samples are analyzed using a gas

Karst groundwater: a challenge for new resources

NASA Astrophysics Data System (ADS)

Bakalowicz, Michel

2005-03-01

Karst aquifers have complex and original characteristics which make them very different from other aquifers: high heterogeneity created and organised by groundwater flow; large voids, high flow velocities up to several hundreds of m/h, high flow rate springs up to some tens of m3/s. Different conceptual models, known from the literature, attempt to take into account all these particularities. The study methods used in classical hydrogeology—bore hole, pumping test and distributed models—are generally invalid and unsuccessful in karst aquifers, because the results cannot be extended to the whole aquifer nor to some parts, as is done in non-karst aquifers. Presently, karst hydrogeologists use a specific investigation methodology (described here), which is comparable to that used in surface hydrology. Important points remain unsolved. Some of them are related to fundamental aspects suc h as the void structure - only a conduit network, or a conduit network plus a porous matrix -, the functioning - threshold effects and non-linearities -, the modeling of the functioning - double or triple porosity, or viscous flow in conduits - and of karst genesis. Some other points deal with practical aspects, such as the assessment of aquifer storage capacity or vulnerability, or the prediction of the location of highly productive zones. Los acuíferos kársticos tienen características originales y complejas que los hacen muy diferentes de otros acuíferos: alta heterogeneidad creada y organizada por el flujo de agua subterránea, espacios grandes, velocidades altas de flujo de hasta varios cientos de m/h, manantiales con ritmo alto de flujo de hasta algunas decenas de m3/s. Diferentes modelos conceptuales que se conocen en la literatura tratan de tomar en cuenta todas estas particularidades. Los métodos de estudio usados en hidrogeología clásica- pozos, pruebas de bombeo y modelos distribuidos- son generalmente inválidos y no exitosos en acuíferos kársticos, debido a que los resultados no pueden extenderse a todo el acuífero ni a alguna de sus partes, como se hace en acuíferos no kársticos. Actualmente los hidrogeólogos kársticos usan una metodología de investigación específica, que se des cribe aquí, la cual es comparable con la que se utiliza en hidrología superficial. Puntos importantes permanecen sin resolverse. Algunos de ellos se relacionan con aspectos fundamentales tal como la estructura de espacios- solo una red de conductos, ouna red de conductos más una matriz porosa-, el funcionamiento-efectos threshold y no-linealidades-, el modelizado del funcionamiento-porosidad dobleo triple, o flujo viscoso en conductos- y génesis del karst. Algunos otros puntos se relacionan con aspectos prácticos, tal como la evaluación de la capacidad de almacenamiento del acuífero o la vulnerabilidad, o la predicción de la localización de zonas altamente productivas. Les aquifères karstiques présentent des caractères originaux complexes qui les distinguent profondément de tous les autres milieux aquifères: forte hétérogénéité créée et organisée par les écoulements souterrains eux-mêmes, vides de très grandes dimensions, vitesses d'écoulement pouvant atteindre quelques centaines de mètres par heure, sources à débit pouvant atteindre quelques dizaines de m3/s. Différents modèles conceptuels tentent de prendre en compte ces particularités. Les méthodes d'étude de l'hydrogéologie classique—forage, essai de pompage et modèles maillés - ne sont en général pas adaptés aux aquifères karstiques, parce que les résultats obtenus ne peuvent pas être étendus à l'aquifère tout entier, ou à certaines de ses parties, comme cela est fait pour les aquifères non karstiques. Actuellement les hydrogéologues du karst ont recours à une méthodologie d'étude spécifique décrite ici, comparable à celle utilisée en hydrologie de surface. Des points importants restent à résoudre. Certains concernent des aspects fondamentaux, comme la structure des vides - réseau de conduits uniquement, ou bien réseau de conduits et matrice poreuse -, le fonctionnement - problèmes de seuil et plus généralement les non-linéarités -, la modélisation du fonctionnement - double porosité ou écoulement visqueux en conduits - et de la genèse du karst. D'autres points portent sur des aspects pratiques, comme l'évaluation de la capacité de stockage ou de la vulnérabilité de l'aquifère, et la prédiction des zones à haute productivité.

Assessment of hydraulic properties of sedimentary and volcanic aquifer systems under arid conditions in the Republic of Djibouti (Horn of Africa)

NASA Astrophysics Data System (ADS)

Jalludin, Mohamed; Razack, Moumtaz

The Republic of Djibouti (23,000 km2 500,000 inhabitants), located within the Horn of Africa, undergoes an arid climate with an average annual rainfall less than 150 mm. Water resources are provided up to 98% by groundwater. Two types of aquifers are encountered: volcanic and sedimentary aquifers. This paper focuses on the assessment of their hydraulic properties, which is necessary for future tasks regarding the management of these aquifers. To this end, a data base consisting of all available pumping test data obtained since the 1960s was compiled. Pumping tests have been interpreted to determine transmissivity. Solely for volcanic aquifers, transmissivity also has been estimated through an empirical relationship using specific capacity corrected for turbulent well losses. The transmissivity of each type of aquifer can span up to four orders of magnitude, pointing out their strong heterogeneity. For the various volcanic rocks, the younger the rock, the higher the transmissivity. The transmissivity of volcanic rocks has therefore decreased in the course of geological time. At present, a much better understanding of the hydraulic properties of these complex aquifers has been obtained, which should enable optimal management of their groundwater resources through the use of numerical modeling. La République de Djibouti (23,000 km2 500,000 habitants), située dans la Corne de l'Afrique, subit un climat aride avec une pluviométrie moyenne annuelle inférieure à 150 mm. Les ressources en eau sont fournies à plus de 98% par les eaux souterraines contenues dans des aquifères sédimentaires ou volcaniques. Cet article a pour objectif l'évaluation des propriétés hydrauliques de ces aquifères, étape indispensable pour entreprendre par la suite des études en vue de la gestion de ces aquifères. Une base rassemblant les données d'essais par pompage disponibles depuis les années Soixante a d'abord été établie. Les essais par pompage ont été interprétés pour déduire la transmissivité. Concernant les aquifères volcaniques, la transmissivité a également été estimée à l'aide d'une relation empirique reliant la transmissivité et le débit spécifique corrigé des pertes de charge anormales. La transmissivité pour chaque aquifère couvre jusqu'à quatre ordres de grandeur, montrant la forte hétérogénéité de ces milieux. Pour les roches volcaniques, on observe que la transmissivité est d'autant meilleure que la roche est plus jeune. Leur transmissivité a ainsi diminué durant les temps géologiques. La compréhension des propriétés hydrauliques de ces aquifères complexes est à présent bien meilleure, ce qui permet d'envisager une gestion optimale de leurs ressources à l'aide de modèles numériques. La República de Yibuti (23.000 km2, 500.000 habitantes) está situada en el Cuerno de África, donde se han formado diversas unidades volcánicas-basaltos y riolitas-y rocas sedimentarias desde la expansión de los continentes acaecida al inicio de la deriva continental (hace 30 millones de años). La precipitación media anual es inferior a 150 mm. Las rocas volcánicas y sedimentarias, con dimensión inferior a 2.000 km2, constituyen acuíferos locales. Los basaltos estratificados forman un acuífero regional que se extiende a más de 9.000 km2. La multitud de datos existente ha sido almacenada desde los años 1960 en una base de datos. La transmisividad de estos acuíferos ha sido determinada mediante datos de ensayos de bombeo y una relación empírica que usa la capacidad específica corregida con las pérdidas turbulentas en el pozo. La transmisividad de estos acuíferos se comporta como una variable lognormal, hecho importante para los trabajos previstos de modelación con métodos estadísticos. La transmisividad de cada acuífero puede variar hasta en cuatro órdenes de magnitud, manifestando su gran heterogeneidad. Para los materiales volcánicos, la transmisividad es mayor cuanto más joven es la roca. La permeabilidad de las rocas volcánicas ha evolucionado por tanto con el tiempo geológico. Actualmente, se posee un mayor conocimiento sobre las propiedades hidráulicas de estos acuíferos complejos, de manera que se puede hacer una gestión óptima de sus recursos hídricos subterráneos con la utilización de modelos numéricos.

Geology and hydrogeology of the Dammam Formation in Kuwait

NASA Astrophysics Data System (ADS)

Al-Awadi, E.; Mukhopadhyay, A.; Al-Senafy, M. N.

The Dammam Formation of Middle Eocene age is one of the major aquifers containing useable brackish water in Kuwait. Apart from the paleokarst zone at the top, the Dammam Formation in Kuwait consists of 150-200m of dolomitized limestone that is subdivided into three members, on the basis of lithology and biofacies. The upper member consists of friable chalky dolomicrite and dolomite. The middle member is mainly laminated biomicrite and biodolomicrite. The lower member is nummulitic limestone with interlayered shale toward the base. Geophysical markers conform to these subdivisions. Core analyses indicate that the upper member is the most porous and permeable of the three units, as confirmed by the distribution of lost-circulation zones. The quality of water in the aquifer deteriorates toward the north and east. A potentiometric-head difference exists between the Dammam Formation and the unconformably overlying Kuwait Group; this difference is maintained by the presence of an intervening aquitard. Résumé La formation de Damman, d'âge Éocène moyen, est l'un des principaux aquifères du Koweit, contenant de l'eau saumâtre utilisable. A part dans sa partie supérieure où existe un paléokarst, la formation de Damman au Koweit est constituée par 150 à 200m de calcaires dolomitisés, divisés en trois unités sur la base de leur lithologie et de biofaciès. L'unité supérieure est formée d'une dolomicrite crayeuse et friable et d'une dolomie. L'unité médiane est pour l'essentiel une biomicrite laminée et une biodolomicrite. L'unité inférieure est un calcaire nummulitique avec des intercalations argileuses vers la base. Les marqueurs géophysiques sont conformes à ces subdivisions. Les analyses de carottes montrent que l'unité supérieure est la plus poreuse et la plus perméable des trois. La répartition des zones d'écoulement souterrain confirment ces données. La qualité de l'eau dans l'aquifère se dégrade en direction du nord et de l'est. Une différence de niveau piézométrique est observée entre la formation de Damman et le groupe de Koweit qui la recouvre en discordance; cette différence est due à la présence d'un niveau imperméable qui la maintient captive. Resumen La Formación Damman, del Eoceno Medio, es uno de los mayores acuíferos de agua salobre aprovechable en Kuwait. Además de una zona de paleokarst en la parte superior, la Formación Damman en Kuwait consiste en 150-200m de caliza dolomitizada, que se subdivide en tres zonas en función de la litología y la biofacies. La parte superior está formada por dolomicrita yesífera friable y dolomita. La parte central es básicamente biomicrita laminada y biodolomicrita. La inferior es caliza nummulítica, con intercalaciones de pizarra en la base. Los marcadores geofísicos reflejan claramente estas subdivisiones. Los análisis de testigos revelan que la parte superior es la más porosa y permeable de las tres unidades. Esto queda confirmado con la distribución de zonas de circulación perdidas. La calidad del agua en el acuífero se deteriora hacia el norte y el este. Sobre la Formación Damman, y de manera no conforme, suprayace otra formación, que se conoce como Grupo Kuwaití. Existe una diferencia de niveles piezométricos entre ambas formaciones, la cual se mantiene por la presencia de una capa semiconfinante.

Medical Surveillance Monthly Report (MSMR). Volume 23, Number 5, May 2016

DTIC Science & Technology

2016-05-01

ment to the military. The most common post-RS adverse outcomes include residual refractive error (UCVA worse than 20/40), dry eye symptoms, and...level of visual acu- ity expected after RS, the severity of dry eye symptoms from tear film insufficiency or superficial keratitis, and the severity...procedural MTF was also estimated. The outcomes with the highest prevalences, post-RS myopia, hyperopia, astigmatism, and dry eye symptoms from tear

Radiocarbon dating of dissolved inorganic carbon in groundwater from confined parts of the Upper Floridan aquifer, Florida, USA

NASA Astrophysics Data System (ADS)

Plummer, Niel; Sprinkle, Craig

2001-03-01

Geochemical reaction models were evaluated to improve radiocarbon dating of dissolved inorganic carbon (DIC) in groundwater from confined parts of the Upper Floridan aquifer in central and northeastern Florida, USA. The predominant geochemical reactions affecting the 14C activity of DIC include (1) dissolution of dolomite and anhydrite with calcite precipitation (dedolomitization), (2) sulfate reduction accompanying microbial degradation of organic carbon, (3) recrystallization of calcite (isotopic exchange), and (4) mixing of fresh water with as much as 7% saline water in some coastal areas. The calculated cumulative net mineral transfers are negligibly small in upgradient parts of the aquifer and increase significantly in downgradient parts of the aquifer, reflecting, at least in part, upward leakage from the Lower Floridan aquifer and circulation that contacted middle confining units in the Floridan aquifer system. The adjusted radiocarbon ages are independent of flow path and represent travel times of water from the recharge area to the sample point in the aquifer. Downgradient from Polk City (adjusted age 1.7 ka) and Keystone Heights (adjusted age 0.4 ka), 14 of the 22 waters have adjusted 14C ages of 20-30 ka, indicating that most of the fresh-water resource in the Upper Floridan aquifer today was recharged during the last glacial period. All of the paleowaters are enriched in 18O and 2H relative to modern infiltration, with maximum enrichment in δ18O of approximately 2.0‰. Résumé. Les modèles de réactions géochimiques ont été évalués afin de tester la datation par le radiocarbone du carbone minéral dissous (CMD) des eaux souterraines dans les parties captives de la nappe supérieure de Floride, en Floride centrale et nord-orientale (États-Unis). Les réactions géochimiques prédominantes affectant l'activité en 14C du CMD comprennent (1) la dissolution de la dolomite et de l'anhydrite accompagnée de la précipitation de la calcite (dédolomitisation), (2) la réduction des sulfates accompagnant une dégradation microbienne du carbone organique, (3) la recristallisation de la calcite (échange isotopique), et (4) le mélange d'eau douce avec de l'eau salée, jusqu'à 7%, dans certaines zones côtières. Les transferts minéraux nets calculés sont extrêmement faibles dans les parties situées dans l'amont de l'aquifère ils augmentent significativement dans les zones de l'aval, montrant en partie au moins l'existence d'une drainance ascendante depuis l'aquifère inférieur de Floride et une circulation qui met en relation les unités captives du système aquifère de Floride. Les âges radiocarbone corrigés sont indépendants des trajets d'écoulement et représentent des temps de transit de l'eau depuis la zone de recharge vers le point de prélèvement dans l'aquifère. En aval de Polk City (âge corrigé 1,7 ka) et de Keystone Heighats (âge corrigé 0,4 ka), 14 des 22 échantillons d'eau présentent des âges corrigés compris entre 20 et 30 ka, ce qui montre que la plus grande partie des ressources actuelles en eau douce de la nappe supérieure de Floride provient d'une recharge effectuée au cours de la dernière période glaciaire. Toutes ces eaux anciennes sont enrichies en 18O et en 2H par rapport à l'infiltration actuelle, avec un enrichissement maximal de δ18O d'environ 2.0‰. Resumen. Se han evaluado varios modelos geoquímicos con el fin de mejorar la datación del carbono inorgánico disuelto (CID) en las aguas subterráneas de las zonas confinadas del acuífero Superior de Florida, que ocupa el centro y nordeste de Florida (Estados Unidos). Las reacciones geoquímicas dominantes en cuanto a la actividad del 14C del CID incluyen: (1) disolución de dolomita y anhidrita, con precipitación de calcita (o de-dolomitización), (2) reducción de sulfato, acompañada por degradación microbiana de carbón orgánico, (3) recristalización de calcita (intercambio isotópico), y (4) mezcla de agua dulce con hasta un 7% de agua salina en algunas áreas costeras. Se ha calculado que las transferencias netas acumuladas de mineral son despreciables en las zonas situadas aguas arriba, y aumentan significativamente aguas abajo. Esto refleja, al menos en parte, el goteo desde el acuífero Inferior de Florida y la interconexión de las unidades confinantes en el sistema acuífero de Florida. Las edades de radiocarbono estimadas son independientes de las líneas de flujo y representan tiempos de tránsito de aguas desde el área de recarga hasta el punto de muestreo en el acuífero. Aguas debajo de la ciudad de Polk (edad de 1.700 años) y Keystone Heighats (edad de 400 años), 14 de las 22 muestras tienen edades estimadas de entre 20.000 y 30.000 años, hecho que indica que la mayor parte de los recursos actuales de agua dulce en el acuífero Superior de Florida fue recargada durante el último período glacial. Todas las paleoaguas están enriquecidas en 18O y 2H con respecto al agua actual de recarga, con un factor máximo de enriquecimiento en 18O de, aproximadamente, 2,0.

Microbial degradation of chloroethenes in groundwater systems

NASA Astrophysics Data System (ADS)

Bradley, Paul M.

The chloroethenes, tetrachloroethene (PCE) and trichloroethene (TCE) are among the most common contaminants detected in groundwater systems. As recently as 1980, the consensus was that chloroethene compounds were not significantly biodegradable in groundwater. Consequently, efforts to remediate chloroethene-contaminated groundwater were limited to largely unsuccessful pump-and-treat attempts. Subsequent investigation revealed that under reducing conditions, aquifer microorganisms can reductively dechlorinate PCE and TCE to the less chlorinated daughter products dichloroethene (DCE) and vinyl chloride (VC). Although recent laboratory studies conducted with halorespiring microorganisms suggest that complete reduction to ethene is possible, in the majority of groundwater systems reductive dechlorination apparently stops at DCE or VC. However, recent investigations conducted with aquifer and stream-bed sediments have demonstrated that microbial oxidation of these reduced daughter products can be significant under anaerobic redox conditions. The combination of reductive dechlorination of PCE and TCE under anaerobic conditions followed by anaerobic microbial oxidation of DCE and VC provides a possible microbial pathway for complete degradation of chloroethene contaminants in groundwater systems. Résumé Les chloroéthanes, tétrachloroéthane (PCE) et trichloroéthane (TCE) sont parmi les polluants les plus communs trouvés dans les aquifères. Depuis les années 1980, on considère que les chloroéthanes ne sont pas significativement biodégradables dans les aquifères. Par conséquent, les efforts pour dépolluer les nappes contaminées par des chloroéthanes se sont limités à des tentatives de pompage-traitement globalement sans succès. Des travaux ultérieurs ont montré que dans des conditions réductrices, des micro-organismes présents dans les aquifères peuvent, par réduction, dégrader les PCE et TCE en composés moins chlorés, comme le dichloréthane (DCE) et le chlorure de vinyl (VC). Bien que des études de laboratoire réalisées avec des micro-organismes adaptés aux composés halogénés montrent que la réduction complète en éthane est possible, dans la plupart des nappes la réaction de déchloration par réduction s'arrête apparemment au DCE et au VC. Cependant, des recherches récentes menées sur des sédiments d'un aquifère et d'alluvions ont démontré que l'oxydation microbienne de ces descendants réduits peut se produire de manière significative dans des conditions de redox anérobies. La déchloration par réduction de PCE et de TCE dans des conditions anérobies suivie par une oxydation microbienne anérobie des DCE et VC fournit une piste microbienne possible pour obtenir une dégradation complète des chloroéthanes polluants dans les aquifères. Resumen Los cloroetanos (tetracloroetano PCE y tricloroetano TCE) son contaminantes muy habituales en los acuíferos. Hasta 1980 se consideraba que los cloroetanos no eran biodegradables y, por tanto, los métodos de rehabilitación en acuíferos contaminados con cloroetanos se limitaban al pump-and-treat, generalmente con poco éxito. Posteriormente se vio que, en condiciones reductoras, algunos microorganismos pueden reducir PCE y TCE a unos subproductos menos clorados, como el dicloroetano (DCE) y el cloruro de vinilo (VC). Aunque estudios de laboratorio recientes sugieren que la reducción completa a etano es posible, en la mayoría de los sistemas acuíferos la decloración suele detenerse en los DCE o VC. Sin embargo, investigaciones más recientes en acuíferos y sedimentos fluviales demuestran que la oxidación microbiana de estos subproductos puede ser importante bajo condiciones redox anaerobias. La combinación de la reducción de PCE y TCE en condiciones anaerobias seguida de la oxidación microbiana anaerobia de DCE y VC proporciona un método potencial para la degradación total de los cloroetanos en los sistemas acuíferos.

Engineering an Undergarment for Flash/Flame Protection

DTIC Science & Technology

2011-11-01

the event of a flash fire situation because the fabric could melt and stick to the Soldier’s skin causing more severe burn injury. Additionally, an...harm’s way which include fire fighters and police in their daily work. 1.1 Problem Statement The threat of burn injuries to Soldiers in combat due...to blasts, flash fires and secondary fires has resulted in the development of the Flame Resistant Army Combat Uniform, FR ACU. The FR ACUs provide

Build 3 of an Accelerated Mission Test of a TF41 with Block 76 Hardware.

DTIC Science & Technology

1979-12-01

Temperature and Calculated Turbine 28 Stator Inlet Temperature Time History 7 ACU/DCU Time Checks 31 8 Oil Consumption Between Fills 32 9 Overall Oil...Consumption 33 10 Engine Vibration History 36 11 Corrected "A" Cycle Performance Trends 33 12 Corrected "A" Cycle Performance Trends 39 13 Corrected...records of engine histories during actual flight. An extensive program of pilot interviews 12 0 Li) 05 ____ ____ ___ ____ ____ ___ ____ ____ __ F

Jahn-Teller effects in transition-metal compounds with small charge-transfer energy

NASA Astrophysics Data System (ADS)

Mizokawa, Takashi

2013-04-01

We have studied Jahn-Teller effects in Cs2Au2Br6, ACu3Co4O12(A=Ca or Y), and IrTe2 in which the ligand p-to-transition-metal d charge-transfer energy is small or negative. The Au+/Au3+ charge disproportionation of Cs2Au2Br6 manifests in Au 4f photoemission spectra. In Cs2Au2Br6 with negative Δ and intermediate U, the charge disproportionation can be described using effective d orbitals constructed from the Au 5d and Br 4p orbitals and is stabilized by the Jahn-Teller distortion of the Au3+ site with low-spin d8 configuration. In ACu3Co4O12, Δs for Cu3+ and Co4+ are negative and Us are very large. The Zhang-Rice picture is valid to describe the electronic state, and the valence change from Cu2+/Co4+ to Cu3+/Co3+ can be viewed as the O 2p hole transfer from Co to Cu or d9 + d6L → d9L + d6. In IrTe2, both Δ and U are small and the Ir 5d and Te 5p electrons are itinerant to form the multi-band Fermi surfaces. The ideas of band Jahn-Teller transition and Peierls transition are useful to describe the structural instabilities.

Geochemical and stable isotopic evolution of the Guarani Aquifer System in the state of São Paulo, Brazil

NASA Astrophysics Data System (ADS)

Sracek, Ondra; Hirata, Ricardo

2002-09-01

The purpose of this report is to explain geochemical and stable isotopes trends in the Brazilian unit of the Guarani Aquifer System (Botucatu and Piramboia aquifers) in São Paulo State, Brazil. Trends of dissolved species concentrations and geochemical modeling indicated a significant role of cation exchange and dissolution of carbonates in downgradient evolution of groundwater chemistry. Loss of calcium by the exchange for sodium drives dissolution of carbonates and results in Na-HCO3 type of groundwater. The cation-exchange front moves downgradient at probably much slower rate compared to the velocity of groundwater flow and at present is located near to the cities of Sertãozinho and Águas de Santa Barbara (wells PZ-34 and PZ-148, respectively) in a shallow confined area, 50-70 km from the recharge zone. Part of the sodium probably enters the Guarani Aquifer System. together with chloride and sulfate from the underlying Piramboia Formation by diffusion related to the dissolution of evaporates like halite and gypsum. High concentrations of fluorine (up to 13.3 mg/L) can be explained by dissolution of mineral fluoride also driven by cation exchange. However, it is unclear if the dissolution takes place directly in the Guarani Aquifer System or in the overlying basaltic Serra Geral Formation. There is depletion in δ2H and δ18O values in groundwater downgradient. Values of δ13C(DIC) are enriched downgradient, indicating dissolution of calcite under closed system conditions. Values of δ13C(DIC) in deep geothermal wells are very high (>-6.0‰) and probably indicate isotopic exchange with carbonates with δ13C about -3.0‰. Future work should be based on evaluation of vertical fluxes and potential for penetration of contamination to the Guarani Aquifer System. Résumé. Cet article a pour objet d'expliquer l'évolution de la géochimie et des isotopes stables dans l'unité brésilienne du système aquifère du Guarani (aquifères de Botucatu et Piramboia), dans l'État de Sao Paulo (Brésil). L'évolution des concentrations des espèces dissoutes et la modélisation géochimique ont fait apparaître le rôle notable des échanges de cations et de la dissolution des carbonates de l'amont vers l'aval des nappes. La perte de calcium par échange de cation avec le sodium pilote la dissolution des carbonates et donne naissance à des eaux souterraines à faciès Na-HCO3. Le front d'échange de cation se déplace vers l'aval probablement plus lentement que la vitesse d'écoulement de l'eau souterraine et est actuellement situé à proximité des villes de Sertaozinho et de Aguas de Santa Barbara (respectivement puits PZ-34 et PZ-148), dans une zone captive proche de la surface, à 50-70 km de la zone de recharge. Une partie du sodium provient probablement du système aquifère du Guarani, associée aux chlorures et aux sulfates de la formation Piramboia sous-jacente, par diffusion liée à la dissolution d'évaporites comme la halite et le gypse. De fortes concentrations en fluorures (jusqu'à 13,3 mg/L) peuvent être expliquées par la dissolution d'un minéral fluoré également pilotée par l'échange de cations. Cependant, on ne sait pas bien si la dissolution intervient directement dans le système aquifère du Guarani ou dans la formation basaltique sus-jacente de Serra Geral. Les valeurs de δ2H et δ18O décroissent vers l'aval de la nappe. Les valeurs de δ13C du carbone minéral dissous sont enrichies vers l'aval, indiquant qu'il se produit une dissolution de calcite en système fermé. Les valeurs de δ13C du carbone minéral dissous dans les puits géothermaux profonds sont très élevées (supérieures à -6,0‰) et rendent probablement compte d'échanges isotopiques avec des carbonates possédant un δ13C d'environ -3,0‰. De prochaines études devront s'attacher à évaluer les flux verticaux et le potentiel de pénétration de contamination du système aquifère du Guarani. Resumen. El propósito de este informe es explicar las tendencias geoquímicas y de los isótopos estables en la unidad brasileña del Sistema Acuífero Guaraní (acuíferos de Botucatu y Piramboya), en el Estado de Sao Paulo. Las concentraciones de especies disueltas y los resultados de modelaciones geoquímicas indican que el intercambio catiónico y la disolución de carbonatos desempeñan un papel importante en la evolución aguas abajo del acuífero. La disminución de calcio por el intercambio con sodio origina la disolución de carbonatos, dando lugar a aguas subterráneas de tipo bicarbonatado sódico. El frente de intercambio catiónico se desplaza a una velocidad probablemente mucho más lenta que la del flujo de agua; actualmente, se halla cerca de las ciudades de Sertaozinho y Aguas de Santa Bárbara (pozos PZ-34 y PZ-148, respectivamente), en una zona confinada somera que dista entre 50 y 70 km del área de recarga. Parte del sodio entra probablemente en el Sistema Acuífero Guaraní junto con el cloruro y el sulfato procedentes de la Formación Piramboia inferior, debido a la difusión relacionada con la disolución de evaporitas como la halita y los yesos. Se puede explicar las elevadas concentraciones de flúor (hasta 13,3 mg/L) por la disolución de fluoruro mineral, que sucede también por intercambio catiónico. Sin embargo, no está claro si la disolución ocurre directamente en el Sistema Acuífero Guaraní o en la Formación basáltica superior de Serra Geral. Hay una reducción de δ2H y de δ18O a favor del gradiente hidráulico. Hay un enriquecimiento en δ13C inorgánico aguas abajo, lo que indica que la calcita se disuelve en condiciones de sistema cerrado. Los valores de δ13C inorgánico en pozos geotérmicos profundos son muy altos (mayores que -6,0‰), y probablemente apuntan a un intercambio isotópico con carbonatos de δ13C que tiene un valor del orden del -3,0‰. Las líneas de investigación deberían centrarse en evaluar los flujos verticales y el potencial de penetración de contaminantes en el Sistema Acuífero Guaraní.

Development of a sharp interface model that simulates coastal aquifer flow with the coupled use of GIS

NASA Astrophysics Data System (ADS)

Gemitzi, Alexandra; Tolikas, Demetrios

A simulation program, which works seamlessly with GIS and simulates flows in coastal aquifers, is presented in the present paper. The model is based on the Galerkin finite element discretization scheme and it simulates both steady and transient freshwater and saltwater flow, assuming that the two fluids are separated by a sharp interface. The model has been verified in simple cases where analytical solutions exist. The simulation program works as a tool of the GIS program, which is the main database that stores and manages all the necessary data. The combined use of the simulation and the GIS program forms an integrated management tool offering a simpler way of simulating and studying saline intrusion in coastal aquifers. Application of the model to the Yermasogia aquifer illustrates the coupled use of modeling and GIS techniques for the examination of regional coastal aquifer systems. Pour étudier un système aquifère côtier, nous avons développé un modèle aux éléments finis en quasi 3-D qui simule les écoulements d'eau douce et d'eau salée en régime aussi bien permanent que transitoire. Les équations qui les régissent sont discrétisées par un schéma de discrétisation de Garlekin aux éléments finis. Le modèle a été vérifié dans des cas simples où il existe des solutions analytiques. Toutes les données nécessaires sont introduites et gérées grâce à un logiciel de gestion de SIG. Le programme de simulation est utilisé comme un outil du logiciel de SIG, constituant ainsi un outil de gestion intégrée dont le but est de simuler et d'étudier l'intrusion saline dans les aquifères côtiers. L'application du modèle à l'aquifère de Yermasogia illustre l'utilisation couplée de la modélisation et des techniques de SIG pour l'étude des systèmes aquifères côtiers régionaux. Se ha desarrollado un modelo casi tridimensional de elementos finitos para simular el flujo de agua dulce y salada, tanto en régimen estacionario como en transitorio, en sistemas acuíferos costeros, bajo la hipótesis de separación por medio de una interfaz abrupta. Las ecuaciones del modelo han sido discretizadas mediante un esquema de Galerkin de discretización en elementos finitos. El modelo ha sido verificado en casos sencillos para los que existe solución analítica. Todos los datos necesarios se introducen y gestionan con un Sistema de Información Geográfica [SIG] por ordenador. El programa de simulación forma parte del programa de SIG, constituyendo una herramienta integrada de gestión para estudiar la intrusión salina en acuíferos costeros. La aplicación del modelo al acuífero de Yermasogia ilustra el uso acoplado de las técnicas de modelación y de SIG con el fin de examinar sistemas acuíferos costeros a escala regional.

A study of low-dimensional quaternary mixed-transition metal chalcogenides

NASA Astrophysics Data System (ADS)

Oledzka, Magdalena Agata

New quaternary alkali metal mixed-transition metal sulfides: ACuMSsb2 (A = K, Rb, Cs; M = Mn, Fe, Co) and KCosb{2-x}Cusb{x}Ssb2 (0.5 ≤ x ≤ 1.5) were prepared by CSsb2/Nsb2 sulfurization of a mixture of oxide or sulfide and carbonate precursors of the corresponding metals. All of the phases form in the tetragonal ThCrsb2Sisb2-type structure in space group I4/mmm. The ACoCuSsb2 phases are semiconducting, with room temperature resistivities rhosbRT˜ 10sp{-2}Omega {*}cm;\\ KCosb{0.5}CUsb{1.5}Ssb2 is metallic with a metal-to-nonmetal transition at ˜120 K. Seebeck measurements indicate that the majority of charge carriers are holes. The temperature dependence of magnetic susceptibility shows an anomalous transition to the ferromagnetic state in the ACoCuSsb2 phases. The electrical and magnetic properties of the new quaternary phases are compared to those of ternary ACosb2Ssb2 (A = K, Rb, Cs). The quaternary sulfides ACuFeSsb2 show semiconducting behavior. Magnetic susceptibility data indicate the presence of localized magnetic moment arising from the di- and trivalent iron ions. The semiconducting properties observed in this system are in contrast to the metallic behavior predicted by theoretical calculations. Investigations of the electrical properties of the sulfides ACuMnSsb2 revealed semiconducting behavior with a broad anomaly at ≈70 K. In the temperature range 100-300 K, the molar magnetic susceptibility of all the samples shows a weak maximum consistent with localized antiferromagnetic exchange of isolated two-dimensional manganese cluster nets. The divergence of the FC and ZFC molar susceptibilities at low temperatures, for all the samples, suggests spin-glass-type behavior with a well defined freezing temperature of ≈35 K. Single phase polycrystalline quaternary selenides ACuMnSesb2 (A = K, Rb, Cs) were prepared for the first time by the reduction of the mixture containing corresponding alkali metal carbonates, copper oxide, manganese and selenium powders. p-Type semiconducting behavior was observed for the samples with rhosbRT of {˜}10sp{-1}Omega{*}cm, and Esba˜ 0.1 eV. The relatively high values of magnetic susceptibility and the weak maximum in the temperature dependence of the magnetic susceptibility above 100 K was attributed to short-range antiferromagnetic interactions. New quaternary layered sulfides: NaCuMSsb2 (M = Mn, Fe, Co, Zn) crystallize in the trigonal CaAlsb2Sisb2-type structure in space group P{bar 3}m1. All the new phases are semiconducting, with rhosb{RT} varying from 6.2× 10sp{-1} to 5× 10sp{-2}Omega{*}cm, depending upon the transition metal M. Magnetic susceptibility measurements indicate the presence of localized Mnsp{2+} ions in NaCuMnSsb2. The NaCuMSsb2 (M = Fe, Co) phases display temperature independent paramagnetism whereas the NaCuZnSsb2 phase is diamagnetic, as expected. In addition, detailed low-temperature magnetic studies of the NaCuFeSsb2 phase revealed spin-glass-type behavior with the freezing temperature Tsbf˜ 50 K.

Analysis of Dextromethorphan and Dextrorphan in Skeletal Remains Following Differential Microclimate Exposure: Comparison of Acute vs. Repeated Drug Exposure.

PubMed

Morrison, Lucas M; Unger, Kirk A; Watterson, James H

2017-07-01

Analysis of dextromethorphan (DXM) and its metabolite dextrorphan (DXT) in skeletal remains of rats following acute (ACU, 75 mg/kg, IP, n = 10) or three repeated (REP, 25 mg/kg, IP, n = 10, 40-min interval) doses of DXM is described. Following dosing and euthanasia, rats decomposed outdoors to skeleton in two different microclimate environments (n = 5 ACU and n = 5 REP at each site): Site A (shaded forest microenvironment) and Site B (rocky substrate exposed to direct sunlight, 600 m from Site A). Two drug-free rats at each site served as negative controls. Skeletal elements (vertebrae, ribs, pelvic girdles, femora, tibiae, skulls and scapulae) were recovered, pulverized and underwent methanolic microwave assisted extraction (MAE). Extracts were analyzed by GC-MS following clean-up by solid-phase extraction (SPE). Drug levels, expressed as mass-normalized response ratios and the ratios of DXT and DXM levels (RRDXT/RRDXM) were compared between drug exposures, microclimate sites, and across skeletal elements. DXM levels differed significantly (P < 0.05) between corresponding bone elements across exposure groups (5/7-site A; 4/7-site B), but no significant differences in DXT levels were observed between corresponding elements. RRDXT/RRDXM differed significantly (P < 0.05) between corresponding bone elements across exposure groups (6/7-site A; 5/7-site B). No significant differences were observed in levels of DXM, DXT or RRDXT/RRDXM between corresponding elements from either group between sites. When data from all bone elements was pooled, levels of DXM and RRDXT/RRDXM differed significantly between exposure groups at each site, while those of DXT did not. For both exposure groups, comparison of pooled data between sites showed no significant differences in levels of DXM, DXT or RRDXT/RRDXM. Different decomposition microclimates did not impede the discrimination of DXM exposure patterns from the analyses of DXM, DXT and RRDXT/RRDXM in bone samples. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Quantifying Loss of Acoustic Communication Space for Right Whales in and around a U.S. National Marine Sanctuary

DTIC Science & Technology

2012-01-01

buscan mejorar el manejo de los efectos acumulativos del ruido sobre especies marinas y sus hábitats. Palabras Clave: área marina protegida, especies...dependientes del sonido para comunicarse están poco entendidos. Buscamos desarrollar métodos para cuantificar los efectos del enmascaramiento de la comu... tiempo ( tiempo pico de alimentación). Utilizamos un conjunto de grabadoras acústicas autónomas, temporales, montadas en el fondo en el Santuario

Aberrant AR Signaling as a Function of Declining Androgen

DTIC Science & Technology

2005-03-01

The first was represented as PSA or hAIAK/GAPD1t1 mRNA ratios, sense, 5’-AUG UCA ACU CCA GGA UGC UTT-3’ and antisense, 5’-AGC AUC Transient... advertisement in accordance indirect effects are general transcription factors like SP1 or with 18 U.S.C. Section 1734 solely to indicate this fact. We thank...Targeting the androgen receptor: improvi 1989,17:71-7. growth vs . expression of prostate specific differentiation comes for castration-resistant

Active Vibration Reduction of the Advanced Stirling Convertor

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Metscher, Jonathan F.; Schifer, Nicholas A.

2016-01-01

Stirling Radioisotope Power Systems (RPS) are being developed as an option to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove. A Stirling Radioisotope Generator (SRG) could offer space missions a more efficient power system that uses one fourth of the nuclear fuel and decreases the thermal footprint compared to the current state of the art. The Stirling Cycle Technology Development (SCTD) Project is funded by the RPS Program to developing Stirling-based subsystems, including convertors and controller maturation efforts that have resulted in high fidelity hardware like the Advanced Stirling Radioisotope Generator (ASRG), Advanced Stirling Convertor (ASC), and ASC Controller Unit (ACU). The SCTD Project also performs research to develop less mature technologies with a wide variety of objectives, including increasing temperature capability to enable new environments, improving system reliability or fault tolerance, reducing mass or size, and developing advanced concepts that are mission enabling. Active vibration reduction systems (AVRS), or "balancers", have historically been developed and characterized to provide fault tolerance for generator designs that incorporate dual-opposed Stirling convertors or enable single convertor, or small RPS, missions. Balancers reduce the dynamic disturbance forces created by the power piston and displacer internal moving components of a single operating convertor to meet spacecraft requirements for induced disturbance force. To improve fault tolerance for dual-opposed configurations and enable single convertor configurations, a breadboard AVRS was implemented on the Advanced Stirling Convertor (ASC). The AVRS included a linear motor, a motor mount, and a closed-loop controller able to balance out the transmitted peak dynamic disturbance using acceleration feedback. Test objectives included quantifying power and mass penalty and reduction in transmitted force over a range of ASC operating parameters and mounting conditions. All tests were performed at three different piston amplitudes, 3.0 mm, 3.75 mm, and 4.5 mm. Overall, the transmitted force was reduced to 2% of the total unbalanced force by actively balancing out only the first fundamental frequency, with balancer motor power remaining under one watt. The test results will be used to guide future balancer designs.

Active Vibration Reduction of the Advanced Stirling Convertor

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Metscher, Jonathan F.; Schifer, Nicholas A.

2016-01-01

Stirling Radioisotope Power Systems (RPS) are being developed as an option to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove. A Stirling Radioisotope Generator (SRG) could offer space missions a more efficient power system that uses one fourth of the nuclear fuel and decreases the thermal footprint compared to the current state of the art. The Stirling Cycle Technology Development (SCTD) Project is funded by the RPS Program to developing Stirling-based subsystems, including convertors and controller maturation efforts that have resulted in high fidelity hardware like the Advanced Stirling Radioisotope Generator (ASRG), Advanced Stirling Convertor (ASC), and ASC Controller Unit (ACU). The SCTD Project also performs research to develop less mature technologies with a wide variety of objectives, including increasing temperature capability to enable new environments, improving system reliability or fault tolerance, reducing mass or size, and developing advanced concepts that are mission enabling. Active vibration reduction systems (AVRS), or "balancers", have historically been developed and characterized to provide fault tolerance for generator designs that incorporate dual-opposed Stirling convertors or enable single convertor, or small RPS, missions. Balancers reduce the dynamic disturbance forces created by the power piston and displacer internal moving components of a single operating convertor to meet spacecraft requirements for induced disturbance force. To improve fault tolerance for dual-opposed configurations and enable single convertor configurations, a breadboard AVRS was implemented on the Advanced Stirling Convertor (ASC). The AVRS included a linear motor, a motor mount, and a closed-loop controller able to balance out the transmitted peak dynamic disturbance using acceleration feedback. Test objectives included quantifying power and mass penalty and reduction in transmitted force over a range of ASC operating parameters and mounting conditions. All tests were performed at three different piston amplitudes, 3.0, 3.75, and 4.5 mm. Overall, the transmitted force was reduced to 2 percent of the total unbalanced force by actively balancing out only the first fundamental frequency, with balancer motor power remaining under 1 watt. The test results will be used to guide future balancer designs.

Groundwater and climate change: a sensitivity analysis for the Grand Forks aquifer, southern British Columbia, Canada

NASA Astrophysics Data System (ADS)

Allen, D. M.; Mackie, D. C.; Wei, M.

The Grand Forks aquifer, located in south-central British Columbia, Canada was used as a case study area for modeling the sensitivity of an aquifer to changes in recharge and river stage consistent with projected climate-change scenarios for the region. Results suggest that variations in recharge to the aquifer under the different climate-change scenarios, modeled under steady-state conditions, have a much smaller impact on the groundwater system than changes in river-stage elevation of the Kettle and Granby Rivers, which flow through the valley. All simulations showed relatively small changes in the overall configuration of the water table and general direction of groundwater flow. High-recharge and low-recharge simulations resulted in approximately a +0.05 m increase and a -0.025 m decrease, respectively, in water-table elevations throughout the aquifer. Simulated changes in river-stage elevation, to reflect higher-than-peak-flow levels (by 20 and 50%), resulted in average changes in the water-table elevation of 2.72 and 3.45 m, respectively. Simulated changes in river-stage elevation, to reflect lower-than-baseflow levels (by 20 and 50%), resulted in average changes in the water-table elevation of -0.48 and -2.10 m, respectively. Current observed water-table elevations in the valley are consistent with an average river-stage elevation (between current baseflow and peak-flow stages). L'aquifère de Grand Forks, situé en Colombie britannique (Canada), a été utilisé comme zone d'étude pour modéliser la sensibilité d'un aquifère à des modifications de la recharge et du niveau de la rivière, correspondant à des scénarios envisagés de changement climatique dans cette région. Les résultats font apparaître que les variations de recharge de l'aquifère pour différents scénarios de changement climatique, modélisées pour des conditions de régime permanent, ont un impact sur le système aquifère beaucoup plus faible que les changements du niveau des rivières Kettle et Granby, qui coulent dans la vallée. Toutes les simulations ont montré des différences relativement faibles dans la configuration d'ensemble de la nappe et dans la direction générale des écoulements. Des simulations de conditions de recharge forte et de recharge faible produisent respectivement une remontée de 0,05 m et un abaissement de 0,025 m, approximativement, des cotes de la nappe pour l'ensemble de l'aquifère. Des changements simulés de la cote du niveau de la rivière, pour refléter des niveaux plus hauts que ceux des pics de crues (de 20 et de 50%), produisent respectivement des remontées de la nappe de 2,72 et 3,45 m en moyenne. Des changements simulés de l'altitude du niveau de la rivière, pour refléter des niveaux plus bas que ceux de basses eaux (de 20 et de 50%), produisent respectivement des abaissements de la nappe de 0,48 et 2,10 m en moyenne. Les altitudes courantes observées de la nappe dans la vallée sont cohérentes avec une cote moyenne du niveau de la rivière (entre les niveaux courants de basses eaux et de crues). El acuífero de los Grand Forks, situado al sur de la Columbia Británica central (Canadá) ha sido utilizado como lugar de estudio para modelar la sensibilidad de un acuífero a los cambios en la recarga y el caudal de los ríos de acuerdo con escenarios previstos de cambio climático en la región. Los resultados sugieren que las variaciones en la recarga al acuífero bajo los diversos escenarios, que han sido modelados en régimen estacionario, tienen un impacto mucho menor en las aguas subterráneas que los cambios en el caudal de los ríos Kettle y Granby, que discurren por el valle. Todas las simulaciones muestran diferencias relativamente pequeñas en la configuración regional de los niveles freáticos y en la dirección general del flujo subterráneo. Las simulaciones de recarga elevada y baja causan un incremento de 0,05 m y un decremento de 0,025 m, respectivamente, en los niveles del acuífero. Los cambios de la elevación del río, simulados para reflejar niveles de flujo mayores que los valores pico (en un 20% y un 50%) resultan en cambios medios de los niveles del acuífero de 2,72 m y 3,45 m, respectivamente. Los cambios simulados en la elevación del río para flujos inferiores al caudal de base (en un 20% y en un 50%) provocan descensos en los niveles de 0,48 y 2,10 m, respectivamente. Los niveles actuales del acuífero en el valle son coherentes con una elevación media del nivel en el río (entre el caudal de base actual y los picos de caudal).

Hydrochemical evaluation of groundwater in the Blue Nile Basin, eastern Sudan, using conventional and multivariate techniques

NASA Astrophysics Data System (ADS)

Hussein, Mohammed Tahir

Hydrochemical evaluation of groundwater systems can be carried out using conventional and multivariate techniques, namely cluster, factor analyses and others such as correspondence analysis. The main objective of this study is to investigate the groundwater quality in the Blue Nile basin of eastern Sudan, and to workout a hydrochemical evaluation for the aquifer system. Conventional methods and multivariate techniques were applied to achieve these goals. Two water-bearing layers exist in the study area: the Nubian Sandstone Formation and the Al-Atshan Formation. The Nubian aquifer is recharged mainly from the Blue Nile and Dinder Rivers through lateral subsurface flow and through direct rainfall in outcrop areas. The Al-Atshan aquifer receives water through underground flow from River Rahad and from rainfall infiltration. The prevailing hydrochemical processes are simple dissolution, mixing, partial ion exchange and ion exchange. Limited reverse ion exchange has been witnessed in the Nubian aquifer. Three factors control the overall mineralization and water quality of the Blue Nile Basin. The first factor includes high values of total dissolved solids, electrical conductivity, sodium, potassium, chloride, bicarbonate, sulphate and magnesium. The second factor includes calcium and pH. The third factor is due to fluoride concentration in the groundwater. The study highlights the descriptive capabilities of conventional and multivariate techniques as effective tools in groundwater quality evaluation. Une étude hydrochimique de systèmes aquifères a pu être réalisée au moyen des techniques conventionnelles et multidimensionnelles, telles que les analyses de cluster et factorielles, ainsi que d'autres comme l'analyse des correspondances. Le principal objectif de ce travail est d'étudier la qualité des eaux souterraines du bassin du Nil bleu au Soudan oriental, et de réaliser une évaluation hydrochimique du système aquifère. Des méthodes conventionnelles et des techniques multidimensionnelles ont été appliquées pour atteindre ces objectifs. Deux niveaux aquifères existent dans cette région, la formation des grès nubiens et la formation Al-Atshan. L'aquifère nubien est surtout rechargé par le Nil Bleu et la rivière Dinder grâce à des écoulements souterrains latéraux et par l'infiltration directe de la pluie sur les affleurements. L'aquifère Al-Atshan reçoit l'eau par un écoulement souterrain depuis la rivière Rahad et par infiltration de la pluie. Les processus hydrochimiques déterminants sont la simple dissolution, le mélange, l'échange ionique partiel et l'échange ionique. Un échange ionique inverse limité a été mis en évidence dans l'aquifère nubien. Trois facteurs contrôlent l'ensemble de la minéralisation et la qualité de l'eau du bassin du Nil Bleu. Le premier facteur rend compte des valeurs élevées de la minéralisation, de la conductivité électrique, du sodium, du potassium, des chlorures, des bicarbonates, des sulfates et du magnésium. Le second facteur rend compte du calcium et du pH. Le troisième facteur est lié à la concentration en fluorures des eaux souterraines. L'étude souligne les aptitudes descriptives des techniques conventionnelles et multidimensionnelles en tant qu'outils efficaces d'évaluation de la qualité des eaux souterraines. Resumen La evaluación hidroquímica de sistemas hidrogeológicos puede llevarse a cabo mediante técnicas convencionales y multivariadas, como las de agrupamiento (``cluster''), análisis factorial y otras, incluyendo el análisis de correspondencia. El objetivo principal de este estudio es investigar la calidad de las aguas subterráneas en la cuenca del Nilo Azul, al este de Sudán, y deducir la hidrogeoquímica del sistema acuífero. Se ha aplicado métodos convencionales y técnicas multivariadas para lograr dicho objetivo. Hay dos niveles acuíferos en la zona de estudio: la Formación Arenisca de Nubia y la Formación Al-Atshan. El acuífero de Nubia se recarga fundamentalmente desde los ríos Nilo Azul y Dinder, mediante flujo lateral subsuperficial y lluvia directa en afloramientos. El acuífero de Al-Atshan recibe agua de flujo subterráneo procedente del río Rahad y de lluvia directa. Los procesos hidroquímicos predominantes consisten en disolución, mezcla, intercambio iónico parcial e intercambio iónico el intercambio iónico inverso es limitado en el acuífero de Nubia. Tres factores controlan la mineralización y calidad de las aguas en la cuenca del Nilo Azul. El primer factor comporta valores elevados de sólidos disueltos totales, conductividad eléctrica, sodio, potasio, cloruro, bicarbonato, sulfato y magnesio. El segundo factor atañe al calcio y pH. El tercer factor es debido a la concentración de fluoruro en las aguas subterráneas. El estudio resalta las capacidades descriptivas de las técnicas convencionales y multivariadas como herramientas eficaces para evaluar la calidad de las aguas subterráneas.

The Investigation of Mass Transfer in the Karasu Karstic Aquifer, Konya, Turkey

NASA Astrophysics Data System (ADS)

Ozdemir, Adnan; Nalbantcilar, Tahir

2002-09-01

In this study, the changes in the chemical composition of the groundwater along a flow path were examined by using the water samples collected from unconfined, semi-confined and confined parts of the Karasu karstic aquifer. It was determined that transport of bicarbonate, calcium, and magnesium was dominant in unconfined and semi-confined parts of the aquifer, whereas calcite and dolomite precipitate in the confined parts. On the other hand, gypsum dissolution is present in all parts of the aquifer. In addition, the computed saturation indices explain the occurrences and precipitation of travertines in the Goksu Valley, which is the discharge area for the aquifer. Résumé. Les modifications de la composition chimique de l'eau souterraine le long d'un axe d'écoulement ont été étudiées à partir d'échantillons prélevés dans les parties libres, semi-captives et captives de l'aquifère karstique de Karasu. On a mis en évidence que le transport de carbonate, de calcium et de magnésium est prépondérant dans les parties libres et semi-captives de l'aquifère, alors que la calcite et la dolomite précipitent dans les parties captives. En outre, la dissolution du gypse se produit dans toutes les parties de l'aquifère. Par ailleurs, les indices de saturation calculés rendent compte de l'existence et de la précipitation des travertins dans la vallée du Göksu, qui est la zone de décharge de cet aquifère. Resumen. En este estudio, se han examinado los cambios de composición química en las aguas subterráneas a lo largo de una línea de corriente mediante el análisis de muestras recogidas en partes libres, semiconfinadas y cautivas del acuífero cárstico de Karasu. Se ha determinado que el transporte de bicarbonato, calcio y magnesio es dominante en las zonas libres y semiconfinadas, mientras que la calcita y la dolomita precipitan en las zonas confinadas. Por otro lado, la disolución de yesos ocurre en todo el ámbito del acuífero. Además, los índices de saturación calculados explican la existencia y precipitación de travertinos en el Valle de Goksu, situado en el área de descarga del acuífero.

Groundwater evolution beneath Hat Yai, a rapidly developing city in Thailand

NASA Astrophysics Data System (ADS)

Lawrence, A. R.; Gooddy, D. C.; Kanatharana, P.; Meesilp, W.; Ramnarong, V.

2000-09-01

Many cities and towns in South and Southeast Asia are unsewered, and urban wastewaters are often discharged either directly to the ground or to surface-water canals and channels. This practice can result in widespread contamination of the shallow groundwater. In Hat Yai, southern Thailand, seepage of urban wastewaters has produced substantial deterioration in the quality of the shallow groundwater directly beneath the city. For this reason, the majority of the potable water supply is obtained from groundwater in deeper semi-confined aquifers 30-50 m below the surface. However, downward leakage of shallow groundwater from beneath the city is a significant component of recharge to the deeper aquifer, which has long-term implications for water quality. Results from cored boreholes and shallow nested piezometers are presented. The combination of high organic content of the urban recharge and the shallow depth to the water table has produced strongly reducing conditions in the upper layer and the mobilisation of arsenic. A simple analytical model shows that time scales for downward leakage, from the surface through the upper aquitard to the semi-confined aquifer, are of the order of several decades. Résumé. De nombreuses villes du sud et du sud-est de l'Asie ne possèdent pas de réseaux d'égouts et les eaux usées domestiques s'écoulent souvent directement sur le sol ou dans des canaux et des cours d'eau de surface. Ces pratiques peuvent provoquer une contamination dispersée de la nappe phréatique. A Hat Yai (sud de la Thaïlande), les infiltrations d'eaux usées domestiques sont responsables d'une détérioration notable de la qualité de la nappe phréatique directement sous la ville. Pour cette raison, la majorité de l'eau potable est prélevée dans des aquifères semi-captifs plus profonds, situés entre 30 et 50 m sous la surface. Cependant, une drainance à partir de la nappe phréatique sous la ville constitue une composante significative de la recharge de l'aquifère plus profond, ce qui aura, à long terme, des implications sur la qualité de l'eau. Les résultats fournis par des forages carottés et des piézomètres peu profonds sont présentés. La combinaison entre une concentration élevée en matières organiques, provenant de la recharge par les eaux usées domestiques, et la faible profondeur de la nappe a produit des conditions fortement réductrices dans le niveau supérieur et une mobilisation de l'arsenic. Un modèle analytique simple montre que les échelles de temps pour la drainance vers le bas, à partir de la surface au travers de l'imperméable supérieur vers l'aquifère semi-captif, sont de l'ordre de quelques dizaines d'années. Resumen. Muchas ciudades en el sur y sudeste de Asia carecen de sistemas de saneamiento, por lo que las aguas residuales urbanas son a menudo vertidas bien directamente al suelo o bien a canales de aguas superficiales. Esta práctica puede provocar la contaminación difusa de las aguas subterráneas someras. En Hat Yai, al sur de Tailandia, la percolación de aguas residuales urbanas ha producido un deterioro substancial de la calidad del acuífero somero sobre el que se sitúa la ciudad. Por ello, la mayor parte del suministro de agua potable se obtiene a partir de aguas subterráneas de acuíferos semiconfinados más profundos, localizados entre 30 y 50 m bajo la superficie. No obstante, el goteo desde el acuífero freático constituye una fracción importante de la recarga al acuífero profundo, hecho que tiene implicaciones en lo que respecta a la calidad del agua a largo plazo. Se presentan en este artículo los resultados de testigos de sondeos y de multi-piezómetros someros. El alto contenido en materia orgánica de las aguas urbanas, unido a la cercanía del nivel freático, ha producido la movilización de arsénico al crearse condiciones altamente reductoras. Un modelo matemático sencillo indica que el tiempo de tránsito desde la superficie hasta el acuífero semiconfinado es del orden de varias décadas.

78 FR 60607 - Endangered and Threatened Wildlife and Plants; Endangered Species Status for Echinomastus...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

...We, the U.S. Fish and Wildlife Service (Service), determine that Echinomastus erectocentrus var. acunensis (acu[ntilde]a cactus) and Pediocactus peeblesianus var. fickeiseniae (Fickeisen plains cactus) meet the definition of endangered species under the Endangered Species Act of 1973, as amended. This final rule implements the Federal protections provided by the Act for these species. The effect of this regulation will be to add these species to the List of Endangered and Threatened Wildlife and Plants under the Endangered Species Act.

Calendar of Selected Aeronautical and Space Meetings July 1987 (Calendrier des Manifestations Aeronautiques et Spatiales (Selection) Juillet 1987).

DTIC Science & Technology

1987-07-01

Neuilly s/Seine FR AC;U American Geophysical Union : 2000 Florida Avenue, N.W.. Washington, )C 20009 LIS The various AGARD Panels are as follows: AMP...Railway Terrace, Rugby CV221 3HQ UK ICHMT International Center for Heat and Mass Transfer: P.O. Box 522, 11001 Belgrade YU 127 Acronym or Code Title and...IUGG International Union of Geodesy and Geophysics: c/o School of Surveying, University of New South Wales, Kensington, NSW 2033 0S IUPAC International

Geostatistical mapping of leakance in a regional aquitard, Oak Ridges Moraine area, Ontario, Canada

NASA Astrophysics Data System (ADS)

Desbarats, A. J.; Hinton, M. J.; Logan, C. E.; Sharpe, D. R.

2001-01-01

The Newmarket Till forms a regionally extensive aquitard separating two major aquifer systems in the Greater Toronto area, Canada. The till is incised, and sometimes eroded entirely, by a network of sand- and gravel-filled channels forming productive aquifers and, locally, high-conductivity windows between aquifer systems. Leakage through the till may also be substantial in places. This study investigates the spatial variability of aquitard leakance in order to assess the relative importance of recharge processes to the lower aquifers. With a large database derived from water-well records and containing both hard and soft information, the Sequential Indicator Simulation method is used to generate maps of aquitard thickness and window probability. These can be used for targeting channel aquifers and for identifying potential areas of recharge to the lower aquifers. Conductivities are modeled from sparse data assuming that their correlation range is much smaller than the grid spacing. Block-scale leakances are obtained by upscaling nodal values based on simulated conductivity and thickness fields. Under the "aquifer-flow'' assumption, upscaling is performed by arithmetic spatial averaging. Histograms and maps of upscaled leakances show that heterogeneities associated with aquitard windows have the largest effect on regional groundwater flow patterns. Résumé. La moraine glaciaire de Newmarket constitue un imperméable d'extension régionale séparant deux systèmes aquifères dans la région du Grand Toronto (Canada). La moraine est entaillée, et parfois entièrement érodée, par un réseau de chenaux comblés de sables et de graviers formant des aquifères productifs et, localement, des «fenêtres», zones à forte conductivité hydraulique reliant les systèmes aquifères. Une drainance au travers de la moraine peut également être significative par endroits. Cette étude s'intéresse à la variabilité spatiale de la drainance au travers de l'imperméable, dans le but d'évaluer l'importance relative des processus d'alimentation des aquifères inférieurs. À partir d'une vaste base de données constituée par les mesures faites dans les puits et contenant des informations à la fois certaines et incertaines, la méthode de simulation par indicateur séquentiel est utilisée pour créer des cartes d'épaisseur de l'imperméable et de probabilité d'existence des fenêtres. Ces cartes peuvent être utilisées pour mettre en évidence les aquifères de chenaux et pour identifier les zones potentielles de recharge des aquifères inférieurs. Les conductivités hydrauliques sont modélisées à partir de données clairsemées en supposant que leur gamme de corrélation est beaucoup plus faible que le pas de la grille. La drainance à l'échelle des blocs est obtenue par accroissement du niveau d'échelle des valeurs nodales basé sur les champs de conductivité simulée et des épaisseurs. À partir de l'hypothèse d'écoulement dans l'aquifère, l'accroissement d'échelle est réalisé en faisant une moyenne arithmétique spatiale. Des histogrammes et des cartes de drainance avec accroissement d'échelle montrent que les hétérogénéités associées aux fenêtres dans l'imperméable constituent l'effet le plus important dans l'organisation des écoulements souterrains régionaux. Resumen. El Till de Newmarket forma un acuitardo de extensión regional que separa dos sistemas acuíferos principales en la zona de Greater Toronto (Canadá). El till está horadado, y a veces completamente erosionado, por una red de canales rellenos de arena y grava. Estos constituyen acuíferos productivos y, localmente, conexiones de alta permeabilidad entre sistemas acuíferos. El goteo a través del till puede ser fundamental en ciertos lugares. Este estudio investiga la variabilidad espacial del goteo desde el acuitardo con el fin de establecer la importancia relativa de los procesos de recarga hacia los acuíferos inferiores. Se ha utilizado el método de la Simulación Indicadora Secuencial, soportado por una gran base de datos que contiene registros de sondeos e incluye información blanda y dura, para generar mapas de espesor del acuitardo y mapas de probabilidad de discontinuidades laterales en el acuitardo. Estos resultados se pueden emplear para identificar canales y las zonas de recarga potencial a los acuíferos inferiores. Se han modelado las conductividades a partir de datos dispersos, suponiendo que la distancia de correlación es mucho menor que el espaciado de la malla. Se han calculado valores de goteo a escala de bloque por medio del escalado de los valores nodales, basándose en los campos simulados de conductividad y espesor. El escalado se calcula mediante un promedio aritmético espacial, bajo la hipótesis de "flujo en el acuífero". Los histogramas y mapas de goteos escalados muestran que las heterogeneidades asociadas a las discontinuidades en el acuitardo producen el efecto más notable en la distribución regional del flujo de aguas subterráneas.

The ARCS (Attention, Relevant, Confidence & Satisfaction) Model of Motivational Strategies for Course Designers and Developers.

DTIC Science & Technology

1982-09-01

recognize that military history is based on 1he contest between firepower and mobility -to put it another way, on the contest between lt’tha!tv and...survivability. ’.gg .;t1on for Strategy 3.1.2,2. Try using some "before and fter" illustrations as in the old "Charles Atlas" advertisements , or in...here bec,’,se the stratgies Fig,,re 6.6 , .,o.anize-z according to tneir r.. I t .cir pu-acu -- the course. It IWrL selection and the way, .ucn. easier

[Textual research on the medical books of Liao Dynasty with extant titles].

PubMed

Yang, X Z

2018-01-28

There are only 3 extant medical book titles from 2 authors of the Liao Dynasty, from which almost no medical books were handed down; these include Zhi lu gu mai jue ( Zhilugu's Pulse Study in Verse ), Zhi lu gu zhen jiu shu ( Zhilugu's Book of Acu-moxibustion ) and Medical Book on Pulse and Prescriptions Translated by Yelü Shucheng . The former two books are written by Zhilugu during the reign of Taizong Emperor (927-947) of the Liao Dynasty, and the last one, by Yelü Shucheng during the reign of Xingzong Emperor (1031-1055) of the Liao Dynasty.

Intracardiac echocardiographic guidance for hemodynamic assessment in a patient with congenital abnormalities and a prosthetic aortic valve.

PubMed

Papafaklis, M I; Ligthart, J M R; Vaina, S; Witsenburg, M; Bogers, A J J C; Serruys, P W

2005-01-01

In this case report, we present the use of intracardiac echocardiography (ICE) for guiding the cardiac catheterization and subsequent hemodynamic investigation in an unusual patient case with multiple congenital abnormalities (bicuspid aortic valve, left cervical aortic arch, two aortic coarctations) and two aortic valve replacement operations in the past. The ICE catheter (AcuNav) permitted us to accurately and safely puncture the interatrial septum and place the Swan-Ganz catheter in the left ventricle; additionally, visualization of the aortic coarctation in the ascending aorta was also achieved.

Tactical Target Identification (TTI) Laboratory Simulation. Volume I.

DTIC Science & Technology

1980-03-01

hi r 4> 5! hi - L 0 his0OG 2 ww -" S. - iii m1 tao -J-W - C;ao.h woo -4- ma 49 WKS ’-<-. S w0’ ii- 0 I-) 00-d > 01 t~o- W ZE S acuI w C o~ 0E0’owj...u 1 m I oL K 0 L - - - - ( o -- Ua4-fc( aL .0o - w Cu .- * -1 u a w u >- :>.4 ai > -5 a WQ >a a aLI 0 OL 5-0 ;pI- I. > .-. I-. Mi Qa. "LA - v *- 0 -u

Depth of the base of the Jackson aquifer, based on geophysical exploration, southern Jackson Hole, Wyoming, USA

NASA Astrophysics Data System (ADS)

Nolan, Bernard T.; Campbell, David L.; Senterfit, Robert M.

A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100-600ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200ft (61m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100ft (30m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700ft (210m) in the west, near the town of Wilson, Wyoming. Résumé Une campagne géophysique a été entreprise pour préciser la profondeur du mur de l'aquifère dans le secteur sud de Jackson Hole (Wyoming, États-Unis). Des mesures audio-magnétotelluriques (audio MT) sur 77 sites de ce secteur ont fourni des logs de résistivitéélectrique du sous-sol ; les variations de la lithologie en fonction de la profondeur en ont été déduites. Un niveau géoélectrique à 100-600ohm.m, dénommé "aquifère de Jackson", a servi à définir des dépôts superficiels quaternaires saturés en eau et non consolidés. La profondeur médiane de la base de l'aquifère de Jackson est de l'ordre de 61m, à partir des 62 sites ayant fourni suffisamment de données de résistivité. Les valeurs audio MT mesurées ont été krigées afin d'estimer la profondeur de la base de la formation aquifère dans la partie sud de Jackson Hole. Les cartes d'isovaleurs d'estimation krigées indiquent que la profondeur de la base de la formation aquifère de Jackson est faible dans la partie centrale de la zone d'étude à l'est et à l'ouest des monts Gros Ventre, plus grande dans le secteur ouest près de la zone faillée de Teton, et faible sur la bordure sud de Jackson Hole. Les profondeurs estimées vont de 30m au sud, près des confluences des rivières Spring et Flat avec la rivière Snake, à 210m à l'ouest près de la ville de Wilson (Wyoming). Resumen Se llevó a cabo una campaña geofísica para determinar la profundidad del basamento de un acuífero libre en la zona sur de Jackson Hole, Wyoming, EEUU. USA. Medidas audio-magnetotelúricas (ATM) en 77 lugares de la zona de estudio dieron lugar a registros de resistividad eléctrica del subsuelo, que se usaron para inferir los cambios litológicos con la profundidad. Los depósitos superficiales, saturados y no consolidados de edad cuaternaria, el acuífero de Jackson, forman una capa de resistencia geoeléctrica entre 100-600ohm-m. La profundidad media de la base del acuífero de Jackson se estima en unos 61m (200pies), a partir de 62 registros con medidas suficientes. Los valores ATM fueron krigeados para obtener una medida de la profundidad del basamento del acuífero en la zona sur de Jackson Hole. Los mapas de isoprofundidades obtenidos por krigeado indican que el acuífero es poco profundo en la parte central de la zona de estudio, cerca de los Gros Ventre Buttes orientales y occidentales, más profundo al oeste, cerca del sistema de fallas de Teton, y menos profundo en el borde sur de Jackson Hole. Las profundidades van desde 30m (100pies) en el sur, en la confluencia entre los desfiladeros Spring y Flat con el Río Snake, hasta 210m (700pies) al oeste, cerca de la ciudad de Wilson, Wyoming.

[Professor MA Ji-xing and Acupuncture Scientification at the Primary Stage of Establishment of the People's Republic of China].

PubMed

Huo, Rui-li; Zhu, Ling; Yang, Feng

2015-08-01

In the initial stage (1950s) of the establishment of the People's Republic of China, the Pavlov's theory played an important influence on Chinese biology and medical science fields. At that time, many schools or colleges of traditional Chinese medicine were set up one after another, the first edition of teaching materials or textbook was complete, and a lot of advanced training courses and training classes were developed. In that specific period of "acupuncture scientification", Mr. MA Ji-xing, a professor from China Academy of Traditional Chinese Medicine, is a representative scholar who employed Pavlov's theory to make a scientific explanation about the underlying physiological mechanisms of acupuncture-moxibustion therapy. For example, he employed nerve network or nerve system to explain topical acupuncture stimulation and distal stimulation to induce local effect or distal curative effect, employed the cutaneous-visceral reflex to explain the therapeutic effect of acu-moxibustion for visceral disorders, used the viscera-cutaneous reflex to explain the tender point (sensitized region) or Ashi-point, used the "predominant factor mechanism" or excitation transfer of the stimulated non-sensitized cutaneous region close to the diseased locus to explain the pain-relief of acupuncture stimulation, used the stimulation strength, duration, frequency and distance (to the locus) to explain the needling reinforcing or reducing effect, and so on and so forth. He wrote many articles and books about acupuncturology, one of which was named Jianyao Zhenjiu Xue (Concise Acupuncturology), a well-known demonstration teaching material for advanced training courses, inducing a significant influence on the acu-moxibustion field in both academic field and clinical practice. Looking back this period of history may provide a helpful reference for current research on academic development of acupuncturology.

[Xu Ren's Zhen jiu jing yan fang (Experiential recipe on acupuncture and moxibustion) and its spread].

PubMed

Wang, Zongxin

2002-07-01

The book, Zhen jiu jing yan fang (Experiential Recipe on Acupuncture and Moxibustion), written by Xu Ren, an imperial physician of Korea was completed in the 4th year of Renzu emperor (1644), and was an important work for the history of Korean acupuncture and moxibustion. However, there were mistakes on its writing date as described in the books of acu - moxibustion history in former reports. The portion of Mian xue tang zhen jiu ji cheng (Mianxuetang's Complete Work of Acupuncture and Moxibustion) universally recognized to be unique, was plagiarized from Zhen jiu jing yan fang.

Using environmental isotopes in the study of the recharge-discharge mechanisms of the Yarmouk catchment area in Jordan

NASA Astrophysics Data System (ADS)

Salameh, Elias

The recharge sources, the flow mechanisms and discharge areas of the different groundwater bodies underlying the Yarmouk River catchment area in Jordan, have, until now, not been adequately explained, although a wide range of hydrological, hydrogeological, and hydrochemical studies have been done. Along the Jordanian part of the catchment area of the Yarmouk River, groundwater issues from different aquifers with a variety of chemistries and types within the same aquifer and in between the different aquifers. Conventional recharge/discharge mechanisms, water balances and chemical analyses did not adequately explain the chemical variations and the different water types found in the area. Applying environmental isotopic tools combined with their altitude effects due to topographic variations (250-1,300 m a.s.l. within a distance of 20 km), and taking into consideration re-evaporation effects on the isotopic depletion and enrichment of rainwater, has greatly helped in understanding the recharge discharge mechanisms of the different aquifers. Precipitation along the highlands of an average of 600 mm/year is found to be depleted in its isotopic content of δO18 = -7.0 to -7.26 and δD = -32.2 to -33.28, whereas that of the Jordan Valley of 350 mm/year is highly enriched in isotopes with δO18 = -4.06 and δD = -14.5. The groundwater recharged along the highlands is depleted in isotopes (δO18 = -6, δD = -30), groundwater at the intermediate elevations is enriched (δO18 = -5, δD = -23) and that of the Jordan Valley aquifers containing meteoric water is highly enriched (δO18 -3.8, δD = -18). The deep aquifers in the Jordan Valley foothills are depleted in isotopes (δO18 -18 = -6, δD = -30) and resemble those of the highland aquifers. Only through using isotopes as a tool, were the sources of the different groundwater bodies and recharge and discharge mechanisms unambiguously explained. It was found that recharge takes place all over the study area and produces groundwater, which, from the highlands towards the Jordan Valley, shows increasing enrichment in isotopes. The highlands aquifer, with its groundwater depleted in isotopes, becomes confined towards the Jordan Valley; and, due to its confining pressure, leaks water upwards into the overlying aquifers causing their water to become less enriched in isotopes. Water depleted in its isotopic composition also seeps upward to the ground surface at the mountain foothills through faults and fissures. Les zones de recharge, les mécanismes d'écoulement et les zones de décharges des différentes masses d'eau souterraine sous le bassin versant de la rivière Yarmouk en Jordanie, étaient expliquées de manière ambiguë par les seuls outils isotopiques. Le long de la parti Jordanienne du bassin versant de la rivière Yarmouk l'eau souterraine provient de différents aquifères et se distinguent par leur type et leur composition chimique, selon que l'eau provient du même ou des différents aquifères. Les mécanismes conventionnels de recharge et de décharge, bilan hydrologique ne donnaient pas d'explications satisfaisantes concernant les variations chimiques et les différents types d'eau. En appliquant les isotopes environnementaux combinés aux effets de l'altitude sur les variations des teneurs isotopiques (l'altitude varie de 250 à 1,300 m sur une distance de 20 km.) et en prenant en considération les effets de ré-évaporation sur l'appauvrissement et l'enrichissement isotopique des eaux pluviales ont fortement contribués à une meilleure compréhension des mécanismes de recharge des différents aquifères. Les précipitations annuelles sont comprises entre 600 mm dans les zones en altitude et 350 mm dans la vallée de la Jordanie. Les écoulements de l'eau souterraine sont dirigés des zones en altitude vers la vallée de la Jordanie. Les eaux souterraines des zones en altitude sont isotopiquement appauvries (δO18 = -6, δD = -30), les eaux souterraines des zones de moyenne altitude sont enrichies (δO18 = -5, δD = -23) et les eaux de la vallée très enrichies (δO18 -3.8, δD = -18). Les aquifers profonds dans la vallée de la Jordanie sont appauvris (δO18 -18 = -6, δD = -30) et se confondent avec les eaux des zones situées en altitude. En appliquant uniquement les isotopes environnementaux comme des outils de compréhension des phénomènes hydrogéologiques, la source des différentes masses d'eau souterraines, les mécanismes de la recharge et de la décharge pourraient être expliqués de manière ambiguë. Las fuentes de recarga, los mecanismos de flujo y las áreas de descarga de los diferentes cuerpos de agua subterránea que subyacen el área de la cuenca del Río Yarmouk en Jordania, se han explicado de manera no ambigua únicamente mediante la aplicación de los isótopos como herramienta. A lo largo de la parte Jordana del área de la cuenca del Río Yarmouk el agua subterránea emerge de diferentes acuíferos con una variedad de tipos y composiciones, ya sea que provengan del mismo acuífero o de diferentes acuíferos. Los mecanismos convencionales de recarga/descarga, balances hídricos y variaciones químicas no han podido explicar las variaciones químicas y los diferentes tipos de aguas. La aplicación de herramientas de isótopos ambientales combinadas con los efectos de altitud derivados de variaciones topográficas (250 hasta 1,300 m s.n.m. en una distancia de 20 km) y tomando en consideración los efectos de re-evaporación en el empobrecimiento de isótopos y enriquecimiento del agua de lluvia han ayudado fuertemente en el entendimiento de los mecanismos de recarga/descarga de los diferentes acuíferos. La precipitación en el área varía de 600 mm/año, a lo largo de las tierras altas, a 350 mm/año en el área del Valle Jordán. El flujo de agua subterránea ocurre de las tierras altas hacia el Valle Jordán. El agua subterránea de las tierras altas está empobrecida en isótopos (δO18 = -6, δD = -30), el agua subterránea de elevaciones intermedias está enriquecida (δO18 = -5, δD = -23), y el agua de los acuíferos del Valle Jordan contiene agua meteórica que se encuentra altamente enriquecida (δO18 = -3.8, δD = -18). Los acuíferos profundos que se localizan al pie de las tierras altas del Valle Jordán están empobrecidos en isótopos (δO18 = -6, δD = -30) y son similares a los acuíferos de las tierras altas. Solo al aplicar los isótopos ambientales como herramienta pudo explicarse de manera inequívoca las fuentes de los diferentes cuerpos de agua subterránea y los mecanismos de recarga y descarga.

Quaternary Aquifer of the North China Plain-assessing and achieving groundwater resource sustainability

NASA Astrophysics Data System (ADS)

Foster, Stephen; Garduno, Hector; Evans, Richard; Olson, Doug; Tian, Yuan; Zhang, Weizhen; Han, Zaisheng

The Quaternary Aquifer of the North China Plain is one of the world's largest aquifer systems and supports an enormous exploitation of groundwater, which has reaped large socio-economic benefits in terms of grain production, farming employment and rural poverty alleviation, together with urban and industrial water-supply provision. Both population and economic activity have grown markedly in the past 25 years. Much of this has been heavily dependent upon groundwater resource development, which has encountered increasing difficulties in recent years primarily as a result of aquifer depletion and related phenomena. This paper focuses upon the hydrogeologic and socio-economic diagnosis of these groundwater resource issues, and identifies strategies to improve groundwater resource sustainability. L'aquifère Quaternaire de la Plaine du Nord de la Chine est l'un des plus grands systèmes aquifères du monde; il permet une exploitation énorme d'eau souterraine, qui a permis des très importants bénéfices socio-économiques en terme de production de céréales, d'emplois ruraux et de réduction de la pauvreté rurale, en même temps que l'approvisionnement en eau potable et pour l'industrie. La population comme l'activité économique ont remarquablement augmenté au cours de ces 25 dernières années. Elles ont été sous la forte dépendance du développement de la ressource en eau souterraine, qui a rencontré des difficultés croissantes ces dernières années, du fait du rabattement de l'aquifère et des phénomènes associés. Cet article est consacré aux diagnostiques hydrogéologique et socio-économique des retombées de cette ressource en eau souterraine; il identifie les stratégies pour améliorer la pérennité des ressources en eau souterraine. El acuífero cuaternario de la Llanura Septentrional de China es uno de los mayores sistemas acuíferos del mundo y soporta una enorme explotación de su agua subterránea, las cuales han originado grandes beneficios socioeconómicos en términos de producción de grano, empleo en agricultura y mitigación de la pobreza rural, además de proveer agua para abastecimiento urbano e industria. Tanto la población como la actividad económica han crecido mucho en los últimos 25 años con una gran dependencia de las aguas subterráneas, que ha encontrado dificultades recientes por la explotación intensiva del acuífero y fenómenos relacionados. Este artículo se centra en la diagnosis hidrogeológica y socioeconómica de los problemas relacionados con las aguas subterráneas e identifica estrategias para mejorar la sustentabilidad de este recurco.

[The mathematical theory of acupoints].

PubMed

Zhuo, Lian-Shi

2013-12-01

The ancient medical classics were retrieved to explore narrative on acupoints. And the relevant content of legal calendar in Shiji (Historical Records) and Hanshu (History of the Former Han Dynasty) were taken as a reference. The result showed that the total number of acu-points were based on the number of 365 days of a year. And the corrupts can be restored with the theory of numerology. The 59 heat point originated from the phase of moon, while the 57 water points originated from the number or year related with diasters. Although acupoints are considered to be related with numerology, the recognition of hot points and water points are held to be associated with experiential points in clinic.

The Rewards of Research at an Undergraduate Institution and Lessons Learned in Building Detector Systems that Work

NASA Astrophysics Data System (ADS)

Isenhower, Donald

2015-04-01

This talk addresses primary lessons learned during 28 years of work leading to the awarding of this prize for work on designing, building and operating detectors, with most of the work involving over 150 undergraduates during this time period. There are a wide range of skills and knowledge to be learned if a young scientist is interested in following this career route, so the most important subset of these will be described. Part will be how to involve undergraduate students at their fullest potential, and important differences of ACU from many programs, which has led to collaborators to make inquiries as to when will the ``ACU Army'' arrive so that they can time when their detector components will be shipped to the experiments for the testing and setup to be handed over to these students. The size of the detectors constructed have varied from small hodoscopes to the world's largest active cathode strip chambers. The science knowledge needed for detector construction is extremely multidisciplinary, and this must be learned by the professor directing the work as they will not have an engineering or support staff to lean on usually. This will include fields often considered unimportant to physics; however, ignorance of them can lead to failure. Knowing the primary question to ask will show where a significant area of concern will lie in what is being done by a person, group or company on a subsystem for a detector. Textbook descriptions of detectors, electronics, and materials can lead young experimenters astray. It has been learning the correct, fundamental physical processes that determine actual detector performance that has allowed the awardee to make his most important contributions over many years of research. A final lesson to be described will be how to make your undergraduate research program self-sustaining, so that critical knowledge is not lost as students graduate. Research supported in part by grants from the U.S. DOE Office of Science, the NSF, and NATO.

Types of Moulding and Methods of Eliminating Dry Rot in Historic Buildings: Example of Sobiescy Palace in Lublin (Based on Study by Mirosław Zaród)/ Zagrzybienia I Metody Odgrzybiania Obiektów Zabytkowych Na Przykładzie Pałacu Sobieskich W Lublinie (Na Podstawie Opracowania Dokonanego Przez M. Zaróda)

NASA Astrophysics Data System (ADS)

Wrana, Jan; Jarocka-Mikrut, Aleksandra

2015-06-01

By presenting Sobiescy Palace in Lublin as well as results of mycological research conducted in the said premises, the authors describe hazards and dangers arising from damp present in historic buildings for a long time. Results of mycological research quoted in this article indicate that differences in levels of damp depend on the cardinal direction a specific wall faces. The authors also pay attention to reasons for which the described premises suffer from damp and provide programmes of treatment and prevention. Furthermore, the article gives the reader a detailed insight into multiple opportunities for improving technical conditions of historic buildings and, at the same time, raising their functional standards. However, one must not forget to treat such premises with proper respect. W artykule przedstawiono zagrożenia tkwiące w długotrwałym narażeniu zabudowań historycznych na wilgoć na podstawie Pałacu Sobieskich w Lublinie oraz ekspertyzy mykologicznej. Zwrócono uwagę na różnice w wilgotności ścian oraz zależności wynikające z orientacji budowli względem stron świata. Opisano przyczyny występowania wilgoci w opisywanym założeniu jak również wskazano możliwości ich przeciwdziałaniu. Poprzez przedstawienie możliwych do zastosowania metod ochrony przed wspomnianymi czynnikami dowiedziono, iż możliwości poprawy stanu technicznego, a tym samym standardów funkcjonalnych obiektów zabytkowych jest wiele przy czym należy zachować szczególny szacunek do substancji zabytkowej

Effects of cannabinoids and cannabinoid-enriched Cannabis extracts on TRP channels and endocannabinoid metabolic enzymes

PubMed Central

De Petrocellis, Luciano; Ligresti, Alessia; Moriello, Aniello Schiano; Allarà, Marco; Bisogno, Tiziana; Petrosino, Stefania; Stott, Colin G; Di Marzo, Vincenzo

2011-01-01

BACKGROUND AND PURPOSE Cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC) interact with transient receptor potential (TRP) channels and enzymes of the endocannabinoid system. EXPERIMENTAL APPROACH The effects of 11 pure cannabinoids and botanical extracts [botanical drug substance (BDS)] from Cannabis varieties selected to contain a more abundant cannabinoid, on TRPV1, TRPV2, TRPM8, TRPA1, human recombinant diacylglycerol lipase α (DAGLα), rat brain fatty acid amide hydrolase (FAAH), COS cell monoacylglycerol lipase (MAGL), human recombinant N-acylethanolamine acid amide hydrolase (NAAA) and anandamide cellular uptake (ACU) by RBL-2H3 cells, were studied using fluorescence-based calcium assays in transfected cells and radiolabelled substrate-based enzymatic assays. Cannabinol (CBN), cannabichromene (CBC), the acids (CBDA, CBGA, THCA) and propyl homologues (CBDV, CBGV, THCV) of CBD, cannabigerol (CBG) and THC, and tetrahydrocannabivarin acid (THCVA) were also tested. KEY RESULTS CBD, CBG, CBGV and THCV stimulated and desensitized human TRPV1. CBC, CBD and CBN were potent rat TRPA1 agonists and desensitizers, but THCV-BDS was the most potent compound at this target. CBG-BDS and THCV-BDS were the most potent rat TRPM8 antagonists. All non-acid cannabinoids, except CBC and CBN, potently activated and desensitized rat TRPV2. CBDV and all the acids inhibited DAGLα. Some BDS, but not the pure compounds, inhibited MAGL. CBD was the only compound to inhibit FAAH, whereas the BDS of CBC > CBG > CBGV inhibited NAAA. CBC = CBG > CBD inhibited ACU, as did the BDS of THCVA, CBGV, CBDA and THCA, but the latter extracts were more potent inhibitors. CONCLUSIONS AND IMPLICATIONS These results are relevant to the analgesic, anti-inflammatory and anti-cancer effects of cannabinoids and Cannabis extracts. LINKED ARTICLES This article is part of a themed issue on Cannabinoids in Biology and Medicine. To view the other articles in this issue visit http://dx.doi.org/10.1111/bph.2011.163.issue-7 PMID:21175579

Ozone sensitivity to its precursor emissions in northeastern Mexico for a summer air pollution episode.

PubMed

Sierra, A; Vanoye, A Y; Mendoza, A

2013-10-01

A summer episode was modeled to address the expected response of ambient air O3 to hypothetical emission control scenarios in northeastern Mexico, and in particular in the Monterrey Metropolitan Area (MMA). This region is of interest because the MMA holds one of the worst air quality problems in the country and levels of air pollutants in the rest of northeastern Mexico are starting to be a concern. The MM5-SMOKE-CMAQ platform was used to conduct the numerical experiments. Twenty-four control scenarios were evaluated, combining the level of emission controls of O3 precursors (NO(x) and volatile organic compounds [VOCs]) from 0% to 50%. For the MMA, VOC-only controls result in the best option to reduce O3 concentrations, though the benefit is limited to the urban core. This same strategy results in negligible benefits for the rest of northeastern Mexico. NO(x) controls result in an increase in O3 concentration within the MMA of up to 20 ppbv and a decrease at downwind locations of up to 11 ppbv, with respect to the base-case scenario. Indicator ratios were also used to probe for NO(x)-sensitive and VOC-sensitive areas. Locations with an important influence of NO(x) point sources (i.e., Monclova and Nava/Acuña) are quite sensitive to changes in NO(x) emissions. Border cities in the Rio Bravo/Grande Valley tend to be marginally NO(x)-sensitive. Overall, the MMA seems to be dominated by a VOC-sensitive regime, while the rest of the region would tend to have a NO(x)-sensitive response. The results obtained serve to expand the current knowledge on the chemical regimes that dominate this region (VOC- or NO(x)-sensitive), and thus could help guide public policies related to emission regional control strategies.

Risk Analysis in Support of the Chemical Stockpile Disposal Program (CSDP). Volume 2. Consequence Data

DTIC Science & Technology

1987-12-17

OO O~oO~o OQOQCoOQOO 0000000000 UI z 00.00000000 0 0 0 0 0 0 0 0 0 0 0 0 U- (11KW f1 0Z =. -c OQ OO OO O OO O OO O OO O OO O OOIn O-WO 0 0 00 0 0 0 0...I.-.Oc.eaa aL ac ca ac aa ec a - acu~~~~~~~~~~~~~ .*..**-w aaca a8ac c e c acca ~~~~~~~~C a a9 a a ! a! a9 an aaacaaca aa aao ecaaaa z " .- C; Va ~cc a

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jahnke, Fred C.

FuelCell Energy and ACuPowder investigated and demonstrated the use of waste anode exhaust gas from a high temperature fuel cell for replacing the reducing gas in a metal processing furnace. Currently companies purchase high pressure or liquefied gases for the reducing gas which requires substantial energy in production, compression/liquefaction, and transportation, all of which is eliminated by on-site use of anode exhaust gas as reducing gas. We performed research on the impact of the gas composition on product quality and then demonstrated at FuelCell Energy’s manufacturing facility in Torrington, Connecticut. This demonstration project continues to operate even though the researchmore » program is completed as it provides substantial benefits to the manufacturing facility by supplying power, heat, and hydrogen.« less

C.-E.A. Winslow Day: Proceedings of the June 3, 1977 Centenary Celebration

PubMed Central

Viseltear, Arthur J.

1977-01-01

Sponsored by Yale University, the City of New Haven, and the John B. Pierce Foundation, the C.-E.A. Winslow Day program consisted of speeches by Mr. Leonard Woodcock, President Emeritus, U.A.W., the Honorable Kenneth Gibson, Mayor of Newark, and Dr. Hector Acuña, Director, Pan American Health Organization; reminiscences of Ira Hiscock, Anna M.R. Lauder Professor Emeritus of Public Health, Mary Elizabeth Tennant, Associate Professor Emeritus of Nursing (Public Health), A. Pharo Gagge, Emeritus Fellow, John B. Pierce Foundation, and Mrs. Harriet Welch, Former President of the VNA of New Haven. The proceedings also included the presentation of gifts and the official C.-E.A. Winslow Day Proclamation. PMID:345631

Interventional robotic systems: Applications and technology state-of-the-art

PubMed Central

CLEARY, KEVIN; MELZER, ANDREAS; WATSON, VANCE; KRONREIF, GERNOT; STOIANOVICI, DAN

2011-01-01

Many different robotic systems have been developed for invasive medical procedures. In this article we will focus on robotic systems for image-guided interventions such as biopsy of suspicious lesions, interstitial tumor treatment, or needle placement for spinal blocks and neurolysis. Medical robotics is a young and evolving field and the ultimate role of these systems has yet to be determined. This paper presents four interventional robotics systems designed to work with MRI, CT, fluoroscopy, and ultrasound imaging devices. The details of each system are given along with any phantom, animal, or human trials. The systems include the AcuBot for active needle insertion under CT or fluoroscopy, the B-Rob systems for needle placement using CT or ultrasound, the INNOMOTION for MRI and CT interventions, and the MRBot for MRI procedures. Following these descriptions, the technology issues of image compatibility, registration, patient movement and respiration, force feedback, and control mode are briefly discussed. It is our belief that robotic systems will be an important part of future interventions, but more research and clinical trials are needed. The possibility of performing new clinical procedures that the human cannot achieve remains an ultimate goal for medical robotics. Engineers and physicians should work together to create and validate these systems for the benefits of patients everywhere. PMID:16754193

Land subsidence caused by groundwater exploitation in Suzhou City, China

NASA Astrophysics Data System (ADS)

Chen, Chongxi; Pei, Shunping; Jiao, Jiu Jimmy

2002-09-01

Suzhou City, located at the lower reaches of the Yangtze River in southeastern Jiangsu Province, is one of the few cities in China which suffer from severe ground settlement. A research project was carried out to investigate this problem. Geological and hydrogeological studies show that there is a multi-layered aquifer system with three distinct, soft mud layers of marine and lagoonal origins. An examination of historical records of groundwater extraction, water levels, and ground settlement shows that the ground subsidence is associated with the continuously increasing groundwater extraction in the deep, confined aquifer. It is believed that the consolidation of the soft mud layers, especially the third layer which is thick and close to the main pumped aquifer, contributes to the ground settlement. A three-dimensional finite difference numerical model representing the multi-layered aquifer system was developed to study the ground settlement in response to groundwater extraction. By calibrating the model with both the measured groundwater level and ground settlement, the aquifer parameters were estimated. The model outputs fit reasonably well with the observed results, which indicates that the numerical model can reproduce the dynamic processes of both groundwater flow and soil consolidation. The hydraulic conductivity of the third mud layer near the center of the ground settlement has been reduced by over 30% in the last 14 years. The gradual deterioration in the hydraulic conductivity of the mud may have significant adverse effect on the sustainable groundwater resource of the deep confined aquifer, since the recharge from the shallow aquifers through the mud layer is the only source of water to the deep aquifer. An analysis of the spatial distributions of groundwater drawdown and ground settlement shows that the area with maximum drawdown is not necessarily the area with maximum ground settlement due to the occurrence of the soft mud layer. A simple reallocation in pumping rates on the basis of the spatial distribution of the thick mud layer could significantly reduce the ground settlement. Résumé. La ville de Suzhou, située dans la basse vallée du fleuve Yangtsé dans le sud-est de la province de Jiangsu, est l'une des rares villes de Chine qui souffrent cruellement de tassements du sol. Un projet de recherche a été mené pour étudier ce problème. Des études géologiques et hydrogéologiques montrent qu'il existe un système aquifère multicouche constitué de trois niveaux distincts de limons non consolidés d'origine marine et lagunaire. Un examen des historiques des prélèvements d'eau souterraine, des niveaux de nappe et des tassements de sol montrent que la subsidence du sol est associée à des prélèvements continuellement croissants d'eau souterraine dans l'aquifère captif profond. On pense que le compactage des couches limoneuses non consolidées, en particulier de la troisième couche qui est épaisse et proche du principal aquifère pompé, contribue aux tassements du sol. Un modèle numérique aux différences finies en trois dimensions, représentant l'aquifère multicouche, a été réalisé pour étudier les tassements du sol en réponse aux prélèvements d'eau souterraine. Les paramètres de l'aquifère ont été estimés par calibration du modèle au moyen à la fois des niveaux piézométriques et des tassements du sol. Les résultats de la simulation s'ajustent convenablement aux résultats observés, ce qui indique que le modèle numérique peut reproduire les processus dynamiques aussi bien des écoulements souterrains que de compactage du sol. La conductivité hydraulique de la troisième couche de limon non consolidé au voisinage du centre du tassement de sol a été réduit de plus de 30% au cours des 14 dernières années. La dégradation progressive de la conductivité hydraulique du limon peut avoir un effet significatif néfaste sur la pérennité de la ressource en eau souterraine dans l'aquifère captif profond, puisque la recharge à partir des aquifères superficiels au travers de la couche de limon est la seule alimentation de l'aquifère profond. Une analyse des distributions spatiales de l'abaissement du niveau piézométrique et des tassements du sol montre que la région soumise à l'abaissement maximal de piézométrie n'est pas nécessairement celle des tassements maximaux du sol liés à la présence de la couche de limon non consolidé. Une simple révision des débits de pompage basée sur la distribution spatiale de la couche de limon épaisse peut réduire significativement les tassements du sol. Resumen. La ciudad de Suzhou, situada en el tramo inferior del Río Yangtze, al sudeste de la provincia de Jiangsu, es una de las pocas ciudades chinas que padece problemas serios de subsidencia. Esto ha motivado la realización de un proyecto de investigación en la zona. Estudios geológicos e hidrogeológicos apuntan a un modelo de acuífero multicapa, con tres niveles distintos de lodos blandos de orígenes marino y lacustre. Examinando los registros históricos de extracciones de agua subterránea, así como de nivel piezométrico y de subsidencia, se observa que ésta se halla asociada al bombeo cada vez mayor del acuífero confinado profundo. La hipótesis es que las capas de lodos blandos se van consolidando, si bien la que más contribuye a ello es la tercera, potente y próxima al acuífero más explotado. Se ha realizado un modelo numérico tridimensional en diferencias finitas que representa el sistema acuífero multicapa, con lo que se puede estudiar el efecto de la extracción de agua subterránea en la subsidencia. Calibrando el modelo con niveles piezométricos medidos y con datos de subsidencia, se ha podido estimar los parámetros del acuífero. Los resultados del modelo ajustan de forma razonable con los datos medidos, por lo que el modelo numérico es capaz de reproducir los procesos dinámicos de flujo de aguas subterráneas y consolidación del terreno. La conductividad hidráulica de la tercera capa de lodo cerca del centro de asentamiento se ha reducido en más del 30% durante los últimos 14 años. El deterioro gradual de la conductividad hidráulica del lodo puede tener efectos adversos notables en la sustentabilidad de los recursos de agua subterránea del acuífero confinado profundo, ya que se recarga exclusivamente de acuíferos más someros a través de la capa de lodo. El análisis de la distribución espacial de descenso del nivel piezométrico y de subsidencia muestra que el área de extracción máxima no coincide necesariamente con la de máxima subsidencia, debido a la existencia de la capa de lodos blandos. Una mera redistribución de los caudales de bombeo en función de las propiedades espaciales de la gruesa capa de lodos podría reducir drásticamente los problemas de subsidencia.

The significance of microbial processes in hydrogeology and geochemistry

NASA Astrophysics Data System (ADS)

Chapelle, Francis H.

Microbial processes affect the chemical composition of groundwater and the hydraulic properties of aquifers in both contaminated and pristine groundwater systems. The patterns of water-chemistry changes that occur depend upon the relative abundance of electron donors and electron acceptors. In many pristine aquifers, where microbial metabolism is limited by the availability of electron donors (usually organic matter), dissolved inorganic carbon (DIC) accumulates slowly along aquifer flow paths and available electron acceptors are consumed sequentially in the order dissolved oxygen >nitrate>Fe(III)>sulfate>CO2 (methanogenesis). In aquifers contaminated by anthropogenic contaminants, an excess of available organic carbon often exists, and microbial metabolism is limited by the availability of electron acceptors. In addition to changes in groundwater chemistry, the solid matrix of the aquifer is affected by microbial processes. The production of carbon dioxide and organic acids can lead to increased mineral solubility, which can lead to the development of secondary porosity and permeability. Conversely, microbial production of carbonate, ferrous iron, and sulfide can result in the precipitation of secondary calcite or pyrite cements that reduce primary porosity and permeability in groundwater systems. Les processus microbiologiques peuvent affecter la composition chimique de l'eau souterraine et les propriétés hydrauliques des nappes aussi bien dans les systèmes aquifères pollués que dans les systèmes indemnes de pollution. Les changements de chimisme des eaux qui se produisent dépendent de l'abondance relative des donneurs et des accepteurs d'électrons. Dans les aquifères non contaminés, où le métabolisme microbien est limité par la disponibilité des donneurs d'électrons (en général la matière organique), le carbone minéral dissous (CMD) s'accumule lentement le long des axes d'écoulement souterrain et les accepteurs d'électrons disponibles sont consommés de façon séquentielle, dans l'ordre oxygène dissous>nitrate>fer (III)>sulfate>CO2 (méthanogenèse). Dans les aquifères pollués par des contaminants d'origine humaine, il existe un excès de carbone organique disponible et le métabolisme microbien est limité par la disponibilité des accepteurs d'électrons. En plus des modifications du chimisme des eaux souterraines, la matrice encaissante de l'aquifère est affectée par des processus microbiens. La production de dioxyde de carbone et d'acides organiques peut conduire à accroître la solubilité de minéraux, ce qui peut produire un développement de la porosité secondaire et de la perméabilité. Inversement, la production microbienne de carbonate, de fer ferreux et de sulfure peut provoquer la précipitation de ciments de calcite secondaire ou de pyrite qui réduisent la porosité primaire et la perméabilité dans les nappes. Los procesos microbianos afectan la composición química y las propiedades hidráulicas de los acuíferos, independientemente de su grado de contaminación. Los cambios en la química de las aguas dependen de la abundancia relativa entre donantes y receptores de electrones. En muchos acuíferos no contaminados, donde el metabolismo de los microbios está limitado por la disponibilidad de donantes de electrones (normalmente materia orgánica), el carbono inorgánico disuelto (CID) se acumula lentamente a lo largo de las líneas de flujo y los receptores de electrones se consumen sucesivamente en el siguiente orden: oxígeno disuelto>nitrato>Fe (III)>sulfato>CO2 (metanogénesis). En los acuíferos que presentan contaminación antrópica, existe un exceso de carbono orgánico disponible y entonces el metabolismo de los microbios se encuentra limitado por la disponibilidad de receptores de electrones. Además de los cambios en la química de las aguas, los procesos microbianos afectan también a la matriz sólida del acuífero la producción de CO2 y de ácidos orgánicos puede dar lugar a una mayor solubilidad del mineral, lo que supone un aumento en porosidad secundaria y permeabilidad. Por el contrario, los procesos microbianos pueden dar lugar a la producción de carbonato, ión ferroso y sulfuro, precipitando calcita o pirita y reduciendo la porosidad primaria y la permeabilidad.

Monitoring artificially stimulated fluid movement in the Cretaceous Dakota aquifer, western Kansas

NASA Astrophysics Data System (ADS)

Macfarlane, Allen; Förster, Andrea; Merriam, Daniel; Schrötter, Jörg; Healey, John

2002-10-01

Aquifer properties can be evaluated by monitoring artificially stimulated fluid movements between wells, if the fluid is heated. Changes in the temperature profile recorded in observation wells indicate the flow path of the heated fluid, which in effect acts as a tracer. A fluid-flow experiment in the Cretaceous Dakota Formation at the Hodgeman County site, west-central Kansas, demonstrated the advantage of using the distributed optical-fiber temperature sensing method for monitoring transient temperature conditions in this hydrological application. The fluid flow in the aquifer was increased by producing water from a pumping well and injecting heated water in an injection well 13 m (43 ft) distant from the pumping well. The time-temperature series data obtained and compared with results from previous pumping tests point to interwell heterogeneity of the aquifer and to a zone in the sandstone aquifer of high hydraulic conductivity. However, the experiment would have allowed further clarification of aquifer heterogeneity and thermal properties if at least one observation well had been present between the injection and production wells. Résumé. Les caractéristiques d'un aquifère peuvent être évaluées en effectuant un suivi des mouvements du fluide stimulés artificiellement entre des puits, si le fluide est chauffé. Les variations de profils de température enregistrés dans les puits d'observation donnent des informations sur les directions d'écoulement du fluide chauffé, qui en fait se comporte comme un traceur. Réalisée dans la formation crétacée de Dakota, sur le site du Comté de Hodgeman (centre-ouest du Kansas), une expérience a démontré l'intérêt d'utiliser la méthode de détection distribuée de température par fibres optiques pour suivre les variations de température dans cette application hydrologique. L'écoulement du fluide dans l'aquifère a été favorisé en extrayant de l'eau par pompage et en injectant de l'eau chaude dans un puits d'injection distant de 13 m du puits de pompage. La chronique de température obtenue et comparée aux résultats d'essais de pompage précédents fait apparaître l'hétérogénéité de l'aquifère entre les puits et l'existence d'une zone de forte conductivité hydraulique dans l'aquifère de grès. Toutefois, l'expérience aurait fourni des éclaircissements supplémentaires sur l'hétérogénéité de l'aquifère et sur ses propriétés thermiques si au moins un puits d'observation avait été placé entre le puits d'injection et le puits de pompage. Resumen. Se puede evaluar las propiedades de un acuífero mediante la observación del movimiento de un fluido, calentado artificialmente, entre pozos. Los cambios registrados en el perfil de temperatura de los pozos de observación indican la trayectoria del fluido calentado, el cual actúa como un trazador. Un experimento de este tipo que se realizó en la formación cretácica de Dakota, en el condado de Hodgeman (porción occidental del centro de Kansas, Estados Unidos de América), demostró la ventaja de utilizar el método del sensor de temperatura con fibra óptica distribuída para medir condiciones transitorias de temperatura en esta aplicación hidrológica. El flujo del fluido en el acuífero aumentó con el bombeo de un pozo y la inyección de agua caliente en otro sondeo, que distaba 13 m (43 pies) del primero. Las series de temperatura obtenidas y comparadas con resultados de ensayos de bombeo previos resaltan la heterogeneidad del acuífero entre ambos pozos, así como la existencia de una zona de elevada conductividad hidráulica en el acuífero de la arenisca. Sin embargo, el experimento habría proporcionado más información sobre la heterogeneidad de la formación y sus propiedades termales si se hubiera dispuesto al menos de un punto de observación entre los pozos de inyección y bombeo.

Analysis of phospholipid fatty acids (PLFA) to characterize microbial communities in aquifers

NASA Astrophysics Data System (ADS)

Green, Christopher T.; Scow, Kate M.

This paper reviews published applications of lipid-based biochemical techniques for characterizing microbial communities in aquifers and other deep subsurface habitats. These techniques, such as phospholipid fatty acid (PLFA) analysis, can provide information on a variety of microbial characteristics, such as biomass, physiology, taxonomic and functional identity, and overall community composition. In addition, multivariate statistical analysis of lipid data can relate spatial or temporal changes in microbial communities to environmental factors. The use of lipid-based techniques in the study of groundwater microbiology is advantageous because they do not require culturing and can provide quantitative data on entire communities. However, combined effects of physiological and phylogenetic changes on the lipid composition of a community can confound interpretation of the data, and many questions remain about the validity of various lipid techniques. Despite these caveats, lipid-based research has begun to show trends in community composition in contaminated and pristine aquifers that contribute to our understanding of groundwater microbial ecology and have potential for use in optimization of bioremediation of groundwater pollutants. Résumé Ce papier passe en revue les applications des techniques biochimiques basées sur les lipides pour caractériser les communautés microbiennes présentes dans les aquifères et dans les autres habitats souterrains profonds. Ces techniques, telles que l'analyse des acides gras phospholipidiques (PLFA), peuvent fournir des informations sur un ensemble de caractères microbiens, tels que la biomasse, la physiologie, l'identité taxonomique et fonctionnelle, et surtout la composition de la communauté. En outre, l'analyse statistique multivariée des données sur les lipides peut établir les liens entre des changements spatiaux ou temporels dans la communauté microbienne et des facteurs environnementaux. L'utilisation des techniques basées sur les lipides dans l'étude de la microbiologie des eaux souterraines est intéressante parce qu'elle ne nécessite pas de mise en culture et qu'elle peut fournir des données quantitatives sur les communautés dans leur ensemble. Toutefois, les effets combinés de changements physiologiques et phylogénétiques sur la composition d'une communauté peuvent brouiller l'interprétation des données de nombreuses questions se posent sur la validité des différentes techniques lipidiques. Malgré ces oppositions, la recherche basée sur les lipides a commencéà montrer des tendances dans la composition des communautés dans les aquifères pollués et dans ceux non perturbés ces résultats contribuent ainsi à notre compréhension de l'écologie microbienne des eaux souterraines et montrent qu'il existe un potentiel pour leur utilisation en vue d'une optimisation de la dépollution biologique des eaux souterraines. Resumen Se revisan distintas técnicas bioquímicas que se basan en el análisis de lípidos para caracterizar las comunidades microbianas en hábitats subsuperficiales, incluyendo acuíferos. Estas técnicas, entre las que se incluye el análisis de ácidos grasos fosfolípidos (PLFA), pueden proporcionar información sobre toda una serie de características de las comunidades microbianas, como su biomasa, fisiología, identidad taxonómica y funcional y composición. Además, el análisis estadístico multivariado de los datos de lípidos permite relacionar los cambios espaciales o temporales en las comunidades microbianas con factores ambientales. Las técnicas basadas en lípidos son muy útiles para el estudio microbiológico de las aguas subterráneas, puesto que no requieren cultivos y además proporcionan datos cuantitativos de comunidades completas. Sin embargo, la acción combinada de los cambios fisiológicos y filogenéticos en la composición de lípidos en una comunidad pueden confundir la interpretación de los datos, por lo existen muchas cuestiones abiertas respecto a la validez de algunas de estas técnicas. A pesar de estas dificultades, estas técnicas han permitido detectar diferentes tendencias en la composición de las comunidades en acuíferos con y sin contaminación, lo que contribuye a nuestro entendimiento de la ecología microbiana de los acuíferos. Este último aspecto tiene un uso potencial en la optimización de los métodos de biorremediación de acuíferos.

A Damage Assessment Model for Surface Engagement for Missile and Gunfire.

DTIC Science & Technology

1982-03-01

characteristics make war games perhaps the only medium available, short of war, efficient enough for evalua- ting and examining command decisions at every level ...NP4-(NNNc enmW)" 1000 04 if2=A as O4 920331:91 52 *w:( 0n 0 % %*~ L 00000 0 t t h. 0 Cc SLLM v-%aeVI%0% 0C* 0 0% % 0 m % %0 4b. 0 0 I4qNenc 0 __ 0 4r...cDUnh 04 %W H 11 ACUE40% %N-o 0 0 090 hiit t (MCD hit c-4 m-N’-o m tI i 10 0t i4Nt a6 HLMm0~ *as oil wa a to 910 164 mcq %%% c 𔃺.~ i Nmf’ImP*2 v it

Relation between "terra rossa" from the Apulia aquifer of Italy and the radon content of groundwater: Experimental results and their applicability to radon occurrence in the aquifer

NASA Astrophysics Data System (ADS)

Tadolini, T.; Spizzico, M.

The radon-222 (222Rn) activity in groundwater of the Apulian karstic aquifer in southern Italy is as great as 500 Becquerel per liter (Bq/L) locally. Normal radium-226 (226Ra) activity in the limestone and calcareous dolomites of the aquifer is not enough to explain such a high level. Laboratory investigations identified high 226Ra activity in the "terra rossa," the residuum occupying fissures and cavities in the bedrock, and also the relation between (1) 226Ra-bearing bedrock and "terra rossa" and (2) 222Rn in water. The "terra rossa" is the primary source of the radon in the groundwater. The experimental results show the need to characterize the "terra rossa" of Apulia on the basis of 226Ra activity and also to study the distribution and variations in 222Rn activity over time in the aquifer. Résumé L'activité du radon-222 (222Rn) dans les eaux souterraines de l'aquifère karstique des Pouilles, dans le sud de l'Italie, atteint localement 500 Becquerel par litre (Bq/L). L'activité normale du radium-226 (226Ra) dans les calcaires et dans les calcaires dolomitiques de l'aquifère n'est pas assez élevée pour expliquer des valeurs aussi élevées. Des analyses de laboratoire ont mis en évidence une forte activité en 226Ra dans la terra rossa, remplissage de fissures et de cavités de la roche, ainsi qu'une relation entre (1) la roche et la terra rossa contenant du 226Ra et (2) le 222Rn dans l'eau. La terra rossa est la source primaire de radon dans l'eau souterraine. Les résultats expérimentaux montrent qu'il est nécessaire de caractériser la terra rossa des Pouilles par son activité en 226Ra et d'étudier la distribution et les variations de l'activité en 222Rn au cours du temps dans l'aquifère. Resumen La actividad del radon-222 (222Rn) en el agua subterránea del acuífero cárstico de Apulia, al sur de Italia, alcanza localmente los 500Bq/L. La actividad normal del radio-226 (226Ra) en las calcitas y dolomitas del acuífero no es suficiente para explicar estos niveles tan altos. Las investigaciones de laboratorio han identificado alta actividad de 226Ra en la "terra rossa", el material que rellena las fisuras y cavidades de la matriz rocosa, y han identificado también la relación entre (1) el 226Ra presente en la roca portante y la "terra rossa" y (2) el contenido de 222Rn en el agua. La "terra rossa" es, pues, la fuente principal de radón en las aguas subterráneas. Los resultados experimentales muestran la necesidad de caracterizar la "terra rossa" de Apulia sobre la base de la actividad de 226Ra, así como de estudiar la distribución y las variaciones en la actividad del 222Rn en el acuífero a lo largo del tiempo.

Models for aerobic carbon monoxide dehydrogenase: synthesis, characterization and reactivity of paramagnetic MoVO(μ-S)CuI complexes† †Electronic supplementary information (ESI) available: Synthetic yields and microanalytical, mass spectrometric and IR spectroscopic data for all new compounds. CCDC 1576257–1576260. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c7sc04239f

PubMed Central

Gourlay, Craig; Nielsen, David J.; Evans, David J.; White, Jonathan M.

2017-01-01

Reaction of [CoCp2][TpiPrMoOS(OAr)] [Cp = η5-cyclopentadienyl; TpiPr = hydrotris(3-isopropylpyrazol-1-yl)borate; OAr = phenolate or derivative thereof] with [Cu(NCMe)(Me3tcn)]BF4 (Me3tcn = 1,4,7-trimethyl-1,4,7-triazacyclononane) in MeCN at –30 °C results in the formation of red-brown/black, paramagnetic, μ-sulfido-Mo(v)/Cu(i) complexes, TpiPrMoO(OAr)(μ-S)Cu(Me3tcn). The complexes possess the MoO(μ-S)Cu core found in aerobic carbon monoxide dehydrogenases (CODHs) and exhibit X-band EPR spectra closely related to those of semi-reduced CODH, with giso ∼ 1.937, hyperfine coupling to 95,97Mo (aiso = 39–42 × 10–4 cm–1) and strong superhyperfine coupling to 63,65Cu (aiso = 34–63 × 10–4 cm–1). Anisotropic spectra exhibit monoclinic symmetry with g1 ∼ 1.996, g2 ∼ 1.944 and g3 ∼ 1.882, and nearly isotropic ACu values (75–90 × 10–4 cm–1). The X-ray structures of four derivatives (Ar = Ph, C6H4tBu-2, C6H4sBu-2, C6H4Ph-4) are reported and discussed along with that of the Ar = C6H3tBu2-3,5 derivative (communicated in C. Gourlay, D. J. Nielsen, J. M. White, S. Z. Knottenbelt, M. L. Kirk and C. G. Young, J. Am. Chem. Soc., 2006, 128, 2164). The complexes exhibit distorted octahedral oxo-Mo(v) and distorted tetrahedral Cu(i) centres bridged by a single bent μ-sulfido ligand, with Mo–S and Cu–S distances and Mo–S–Cu angles in the ranges 2.262–2.300 Å, 2.111–2.134 Å and 115.87–134.27°, respectively. The 2 t-butyl derivative adopts a unique phenolate conformation with O 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 Mo–O–Cα and O 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 Mo–S–Cu torsion angles of 92.7 and 21.1°, respectively, very different from those of the other structurally characterized derivatives (31–47 and 33–45°, respectively) and exhibits a relatively short Mo···Cu distance [3.752(2) Å vs. 3.806(7)–4.040(2) Å]. As well, the aCu value of this complex (34.3 × 10–4 cm–1) is much lower than the values observed for other members of the series (55–63 × 10–4 cm–1), supporting the hypothesis that the electronic structure of the MoO(μ-S)Cu core unit and the degree of intermetallic communication are strongly dependent on the geometry of the MoO(OR)(μ-S)Cu unit. The complexes participate in an electrochemically reversible Mo(vi)/Mo(v) redox couple and react with cyanide undergoing decupration and desulfurization reactions of the type observed for CODH. PMID:29629154

Dry coolers and air-condensing units (Review)

NASA Astrophysics Data System (ADS)

Milman, O. O.; Anan'ev, P. A.

2016-03-01

The analysis of factors affecting the growth of shortage of freshwater is performed. The state and dynamics of the global market of dry coolers used at electric power plants are investigated. Substantial increase in number and maximum capacity of air-cooled condensers, which have been put into operation in the world in recent years, are noted. The key reasons facilitating the choice of developers of the dry coolers, in particular the independence of the location of thermal power plant from water sources, are enumerated. The main steam turbine heat removal schemes using air cooling are considered, their comparison of thermal efficiency is assessed, and the change of three important parameters, such as surface area of heat transfer, condensate pump flow, and pressure losses in the steam exhaust system, are estimated. It is shown that the most effective is the scheme of direct steam condensation in the heat-exchange tubes, but other schemes also have certain advantages. The air-cooling efficiency may be enhanced much more by using an air-cooling hybrid system: a combination of dry and wet cooling. The basic applied constructive solutions are shown: the arrangement of heat-exchange modules and the types of fans. The optimal mounting design of a fully shopassembled cooling system for heat-exchange modules is represented. Different types of heat-exchange tubes ribbing that take into account the operational features of cooling systems are shown. Heat transfer coefficients of the plants from different manufacturers are compared, and the main reasons for its decline are named. When using evaporative air cooling, it is possible to improve the efficiency of air-cooling units. The factors affecting the faultless performance of dry coolers (DC) and air-condensing units (ACU) and the ways of their elimination are described. A high velocity wind forcing reduces the efficiency of cooling systems and creates preconditions for the development of wind-driven devices. It is noted that global trends have a significant influence on the application of dry coolers in Russia, in view of the fact that some TPP have a surface condensers arrangement. The reasons that these systems are currently less efficient than the direct steam condensation in an air-cooled condenser are explained. It is shown that, in some cases, it is more reasonable to use mixing-type condensers in combination with a dry cooler. Measures for a full import substitution of steam exhaust heat removal systems are mentioned.

Development of a security vulnerability assessment process for the RAMCAP chemical sector.

PubMed

Moore, David A; Fuller, Brad; Hazzan, Michael; Jones, J William

2007-04-11

The Department of Homeland Security (DHS), Directorate of Information Analysis & Infrastructure Protection (IAIP), Protective Services Division (PSD), contracted the American Society of Mechanical Engineers Innovative Technologies Institute, LLC (ASME ITI, LLC) to develop guidance on Risk Analysis and Management for Critical Asset Protection (RAMCAP). AcuTech Consulting Group (AcuTech) has been contracted by ASME ITI, LLC, to provide assistance by facilitating the development of sector-specific guidance on vulnerability analysis and management for critical asset protection for the chemical manufacturing, petroleum refining, and liquefied natural gas (LNG) sectors. This activity involves two key tasks for these three sectors: Development of a screening to supplement DHS understanding of the assets that are important to protect against terrorist attack and to prioritize the activities. Development of a standard security vulnerability analysis (SVA) framework for the analysis of consequences, vulnerabilities, and threats. This project involves the cooperative effort of numerous leading industrial companies, industry trade associations, professional societies, and security and safety consultants representative of those sectors. Since RAMCAP is a voluntary program for ongoing risk management for homeland security, sector coordinating councils are being asked to assist in communicating the goals of the program and in encouraging participation. The RAMCAP project will have a profound and positive impact on all sectors as it is fully developed, rolled-out and implemented. It will help define the facilities and operations of national and regional interest for the threat of terrorism, define standardized methods for analyzing consequences, vulnerabilities, and threats, and describe best security practices of the industry. This paper will describe the results of the security vulnerability analysis process that was developed and field tested for the chemical manufacturing sector. This method was developed through the cooperation of the many organizations and the individuals involved from the chemical sector RAMCAP development activities. The RAMCAP SVA method is intended to provide a common basis for making vulnerability assessments and risk-based decisions for homeland security. Mr. Moore serves as the coordinator for the chemical manufacturing, petroleum refining, and LNG sectors for the RAMCAP project and Dr. Jones is the chief technology officer for ASME-ITI, LLC for RAMCAP.

Complications of volar locking plating of distal radius fractures in 576 patients with 3.2 years follow-up.

PubMed

Thorninger, Rikke; Madsen, Mette Lund; Wæver, Daniel; Borris, Lars Carl; Rölfing, Jan Hendrik Duedal

2017-06-01

Volar plating of unstable distal radius fractures (DRF) has become the favoured treatment. The complication rates vary from 3 to 36%. The purpose of the study was to estimate the complication rate of volar plating of DRF and its association with AO/OTA fracture type, surgeon experience and type of volar plate. Retrospectively, all patients treated with volar plating of a DRF between February 2009 and June 2013 at Aarhus University Hospital, Denmark were included. AO/OTA fracture type, surgeon experience (1st year, 2nd-5th year resident or consultant), type of plate (VariAx ® , Acu-Loc ® ) and complications were extracted from the electronic medical records. Complications were categorized as carpal tunnel syndrome, other sensibility issues, tendon complications including irritation and rupture, deep infections, complex regional pain syndrome and unidentified DRUJ or scapholunar problems. Reoperations including hardware removal were also charted. 576 patients with a median age of 63 years (min: 15; max: 87) were included. 78% were female and the mean observation time was 3.2 years (min: 2.0; max: 5.4). 78% (n=451) of the patients were treated with VariAx ® and 22% (n=125) with Acu-Loc ® . The overall complication rate was 14.6% (95% CI 11.8-17.7) including carpal tunnel syndrome or change in sensibility in 5.2% and tendon complications in 4.7%. Five flexor tendon ruptures and 12 extensor tendon ruptures were observed. The reoperation rate was 10.4% including 41 cases of hardware removal. A statistically significant association between AO/OTA fracture type C and complications was found. No statistically significant association between complication rate and surgeon experience and type of plate was observed. The majority of DRF patients treated with a volar plate suffer no complications. However, the overall complication rate of 14.6% is substantial. Intra-articular fractures, e.g. AO/OTA-type 23C1-3, had significantly higher complication rates. Neither surgeon experience, nor type of volar plate was able to predict complications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biotransformation of pesticides in saturated-zone materials

NASA Astrophysics Data System (ADS)

Hoyle, Blythe L.; Arthur, Ellen L.

Many studies have been conducted to evaluate pesticide contamination of groundwater in the United States, but investigations of pesticide biotransformation in saturated zones are much less numerous than in surface soils. Because results of studies using soils are not directly applicable to the subsurface, the purpose of this paper is to illustrate examples of pesticide biotransformation in saturated-zone materials. Although it must be considered with caution, the US Environmental Protection Agency's (EPA) "Pesticides in Ground Water Database" was used to focus the discussion on the biotransformation potential of dibromoethane (EDB), atrazine, acetanilide herbicides, and aldicarb, all of which have been detected in groundwater in the United States. Results of more than two dozen studies indicate that a biotransformation potential for these pesticides exists in saturated-zone materials, although for any given pesticide substantial differences in biotransformation occurred. These variations were due both to differences in experimental methods and to heterogeneities in the subsurface materials under investigation. However, because biotransformation mechanisms were not well investigated, it is generally not possible to extrapolate predictions of biotransformation potential beyond the specific sites investigated. These results highlight the need to better understand microbial genetic regulation of biotransformation processes so that genetic information may be effectively incorporated into future investigations of biotransformation potential in the subsurface. Résumé De nombreuses études ont été réalisées pour évaluer le degré de pollution des aquifères par les pesticides aux États-Unis, mais les recherches concernant la biotransformation des pesticides dans les eaux souterraines sont beaucoup moins nombreuses que dans les sols. Du fait que les résultats des études concernant les sols ne sont pas directement applicables au milieu souterrain, le propos de cet article est d'illustrer par des exemples la biotransformation des pesticides dans les nappes. Bien qu'il faille la considérer avec précaution, la base de données sur les pesticides dans les eaux souterraines de l'Agence américaine pour la protection de l'environnement a été utilisée pour centrer la discussion sur le potentiel de biotransformation du dibromoéthane (EDB), de l'atrazine, des désherbants acétanildés et de l'aldicarb, qui tous ont été détectés dans les nappes des États-Unis. Les résultats de plus de deux douzaines d'études indiquent qu'il existe un potentiel de biotransformation de ces pesticides dans les nappes, bien qu'entre chacun de ces pesticides il existe des différences très nettes dans la biotransformation. Ces variations sont en fait dues à la fois à des différences dans les méthodes expérimentales et dans les hétérogénéités dans les matériaux étudiés. Cependant, parce que les mécanismes de la biotransformation ne sont pas bien étudiés, il est en général impossible d'extrapoler les prédictions du potentiel de biotransformation à des sites d'étude spécifiques. Ces résultats soulignent la nécessité de mieux comprendre la régulation génétique microbienne des processus de biotransformation, pour que l'information génétique puisse être efficacement prise en compte dans les futures recherches sur le potentiel de biotransformation dans le sous-sol. Resumen Se han llevado a cabo un gran número de estudios para evaluar la contaminación por pesticidas en los acuíferos de los Estados Unidos de América. Sin embargo, las investigaciones sobre biotransformación de pesticidas en la zona saturada son mucho menos numerosas que en suelos. Como los resultados obtenidos en suelos no son directamente transladables a la zona saturada, el objetivo de este artículo es mostrar ejemplos de biotransformación de pesticidas en la zona saturada. Aunque debe tomarse con cautela, la base de datos "Pesticides in Ground Water Database (Base de Datos de Pesticidas en Aguas Subterráneas)" perteneciente a la US EPA (Agencia de Protección Ambiental de los EEUU) se usó para centrar la discusión en la biotransformación potencial de diversos compuestos orgánicos detectados en diversos acuíferos de los EEUU. Los resultados de más de dos docenas de estudios indican que la biotransformación potencial de estos pesticidas en la zona saturada es posible, aunque para un pesticida dado pueden presentarse grandes diferencias, debidas tanto a diferencias en los métodos experimentales como a la heterogeneidad de los materiales. Sin embargo, no es posible en general extrapolar las predicciones de biotransformación potencial más allá de las zonas específicas estudiadas, al no haberse investigado en detalle sus mecanismos. Los resultados del estudio indican la necesidad de entender mejor la regulación genética de los procesos de biotransformación, para que la información genética pueda incorporarse de manera efectiva en las investigaciones futuras de biotransformación potencial en acuíferos.

Notched bar Izod impact properties of zinc die castings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

2007-03-01

Notched bar Izod impact testing of zinc die cast Alloy 3, Alloy 5, ZA-8, and AcuZinc 5 was performed at five temperatures between -40\\mDC and room temperature in accordance with ASTM E23 for impact testing of metallic materials. A direct comparison between ASTM D256 for impact testing of plastics and ASTM E23 was performed using continuously cast zinc specimens of Alloy 5 and ZA-8 at -40\\mDC and room temperature. There are differences in sample sizes, impact velocity, and striker geometry between the two tests. Bulk zinc tested according to ASTM E23 resulted in higher impact energies at -40\\mDC and lowermore » impact energies at room temperature then did the same alloys when tested according to ASTM D256.« less

Fatigue properties of die cast zinc alloys for automotive lock applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schrems, Karol K.; Dogan, Omer N.; Goodwin, F.E.

2004-06-01

During the 1970’s many automotive lock systems were converted from zinc die casting alloys to engineering plastics for reasons of weight and cost. Recent increases in requirements for precision and security have caused automotive and other lock designers to reconsider zinc alloy die-castings for these applications. To enable this, there is a need for mechanical property data comparable to that of the plastics materials used in these applications. In this work, rotary bending fatigue tests were performed on Alloys 3, 5, ZA-8 and AcuZinc 5 using an R.R. Moore fatigue machine. Testing was performed at 30 Hz and was stoppedmore » at 1x107 cycles. The fatigue limit results were compared to data reported in the literature for higher number of cycles and faster rotations.« less

(3+1)D superspace structural determination of two new modulated composite phases: Sr 1+ x(Cu xMn 1- x)O 3; x=3/11 and x=0.3244

NASA Astrophysics Data System (ADS)

El Abed, Ahmed; Gaudin, Etienne; zur Loye, Hans-Conrad; Darriet, Jacques

2003-01-01

We report the structure determination of two new phases belonging to the A 1+ x(A' xB 1- x)O 3 family of oxides with A=Sr, A'=Cu, and B=Mn, where x=3/11 and x=0.3244, corresponding to a commensurate and incommensurate composite structure, respectively. These two compounds are the first examples of oxides belonging to the Sr 1+ x(Cu xMn 1- x)O 3 family. Their structures were solved in the (3+1) dimensional superspace formalism as modulated composite structures with two subsystems [(Cu,Mn)O 3] and [Sr]. The superspace group used to solve the structures is R 3¯m(00γ)0s . The first phase ( x=3/11), corresponding to the chemical formula Sr 14Cu 3Mn 8O 33, was obtained as a single crystal with unit cell parameters of a=9.6025(3) Å and c1=2.5660(8) Å ( q=7/11 c1∗, Z=3), where c1 is the lattice parameter corresponding to the c-axis of the trigonal subsystem [(Cu,Mn)O 3]. The second phase ( x=0.3244(1)), is a polycrystalline sample with unit cell parameters of a=9.5933(7) and c1=2.5933(3) ( q=0.6622 c1∗, Z=3). In both structures, one dimensional chains run along the c-axis which contain octahedra and trigonal prisms occupied by manganese and copper atoms, respectively. The refinement results show that in both cases copper occupies the rectangular faces of the trigonal prism while manganese occupies the octahedral sites. The magnetic measurements of the polycrystalline phase (Sr 1+ x(Cu xMn 1- x)O 3, x=0.3244(2)) and the Curie constant obtained from the high temperature susceptibility are in agreement with a spin state configuration of S=3/2 for Mn 4+ and S=1/2 for Cu 2+.

The origin of increased salinity in the Cambrian-Vendian aquifer system on the Kopli Peninsula, northern Estonia

NASA Astrophysics Data System (ADS)

Karro, Enn; Marandi, Andres; Vaikmäe, Rein

Monitoring of the confined Cambrian-Vendian aquifer system utilised for industrial water supply at Kopli Peninsula in Tallinn over 24 years reveals remarkable changes in chemical composition of groundwater. A relatively fast 1.5 to 3.0-fold increase in TDS and in concentrations of major ions in ed groundwater is the consequence of heavy pumping. The main sources of dissolved load in Cambrian-Vendian groundwater are the leaching of host rock and the other geochemical processes that occur in the saturated zone. Underlying crystalline basement, which comprises saline groundwater in its upper weathered and fissured portion, and which is hydraulically connected with the overlying Cambrian-Vendian aquifer system, is the second important source of ions. The fractured basement and its clayey weathering crust host the Ca-Cl type groundwater, which is characterised by high TDS values (2-20 g/L). Intensive water ion accelerates the exchange of groundwaters and increases the area of influence of pumping. Chemical and isotopic studies of groundwater indicate an increasing contribution of old brackish water from the crystalline basement and rule out the potential implication of an intrusion of seawater into aquifer. L'origine de la salinité croissante dans le système aquifère du Cambrien-Vendien dans la péninsule de Kopli, nord de l'Estonie Le suivi à long terme du système aquifère captif du Cambrien-Vendien utilisé pour l'approvisionnement d'eaux industrielles dans la Péninsule de Kopli, nord de l'Estonie, révèle de remarquables changements dans la composition chimique des eaux souterraines. Une augmentation de facteur 1.5 à 3 de la TDS et des concentrations en ions majeurs dans l'eau souterraine est la conséquence de pompages intensifs. Les sources principales des charges dissoutes dans les eaux de l'aquifère du Cambrien-Vendien sont le lessivage des roches et d'autres phénomènes géochimiques ayant lieu dans la zone saturée. Le soubassement rocheux cristallin, qui renferme des eaux souterraines salines dans sa partie supérieure altérée et fissurée, et est hydrauliquement connecté avec l'aquifère supérieur du Cambrien-Vendien, est la deuxième importante source d'ions. Le soubassement fracturé et le matériel argileux de l'altération, renferme l'eau souterraine de type Ca-Cl, caractérisée par un haut TDS (2-20 g/l). A cause de la mobilisation intensive de l'eau les échanges d'eau souterraine est sont accélérés et la zone d'influence des pompages augmentent. Les études chimiques et isotopiques indiquent une contribution croissante du drainage des eaux du soubassement cristallin. L'intrusion d'eaux salées de la mer dans le système aquifère n'est pas un phénomène évident. El origen del incremento en salinidad en un sistema de acuíferos Cámbrico-Vendiano en la Península Kopli, norte de Estonie Monitoreo a largo plazo de un sistema de acuíferos confinados, de edad Cámbrico-Vendiano, que se utiliza como fuente de abastecimiento industrial en la Península Kopli, al norte de Estonie, revela cambios notables en la composición química del agua subterránea. Un incremento de 1.5 a 3 veces en TDS y en concentraciones de iones mayores en agua subterránea explotada ha sido ocasionado por bombeo fuerte. Las fuentes principales de carga disuelta en el agua subterránea Cámbrico-Vendiano son la lixiviación de la roca encajonante y los procesos geoquímicos que ocurren en la zona saturada. Basamento cristalino subyacente, que aloja agua subterránea salada en la parte superior intemperizada y fisurada, y está conectado hidráulicamente con el sistema acuífero Cámbrico-Vendiano sobreyacente, es la segunda fuente importante de iones. El basamento fracturado y su corteza de intemperismo arcillosa alojan agua subterránea de tipo Ca-Cl la cual se caracteriza por valores altos de TDS (2-20 g/l). Debido a extracción intensiva se ha acelerado el intercambio de agua subterránea y se ha incrementado el área de influencia del bombeo. Los estudios químicos e isotópicos de agua subterránea indican una contribución creciente por filtración derivada del basamento cristalino. Es evidente una intrusión de agua salada hacia el sistema de acuíferos con implicaciones subsecuentes para la calidad del agua.

Magnetic properties of quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub x}Cu{sub 3}Fe{sub 4}O{sub 12}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murakami, Makoto; Mori, Shigeo; Yamada, Ikuya, E-mail: i-yamada@21c.osakafu-u.ac.jp

Magnetic properties of the quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} are investigated. Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} shows continuous increase in the ferromagnetic transition temperature as x increases. Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} exhibits a ferromagnetic-antiferromagnetic transition in the vicinity of y = 0.5. These observations demonstrate the electron doping effect on magnetic properties of charge-disproportionated ACu{sub 3}Fe{sub 4}O{sub 12} phases.

Thoracic outlet syndrome secondary to a mid-clavicle malunion.

PubMed

Beliaev, Andrei M; Fougere, Christopher

2015-06-04

A 22-year-old man presented with a painful 'clunking' sensation in the right mid-clavicle, and pain and dysaesthesia along the medial aspect of his right arm and hand. Three months earlier, he had been involved in a vehicle accident and sustained a right clavicle fracture. He had a large step off of the right clavicle with a medialisation of the right shoulder. At 90° abduction in external rotation of both shoulders he developed pain, paraesthesia and disappearance of the right radial artery pulsation. CT of the right shoulder in the neutral position demonstrated the clavicle-to-first rib distance of 5.5 mm, MRI showed the clavicular bone callus had a mass effect with effacement of anterior fat adjacent to the brachial plexus cords. He was diagnosed with thoracic outlet syndrome and underwent a corrective right clavicle osteotomy with the use of an AcuMed superior clavicle plate. 2015 BMJ Publishing Group Ltd.

Thoracic outlet syndrome secondary to a mid-clavicle malunion

PubMed Central

Beliaev, Andrei M; Fougere, Christopher

2015-01-01

A 22-year-old man presented with a painful ‘clunking’ sensation in the right mid-clavicle, and pain and dysaesthesia along the medial aspect of his right arm and hand. Three months earlier, he had been involved in a vehicle accident and sustained a right clavicle fracture. He had a large step off of the right clavicle with a medialisation of the right shoulder. At 90° abduction in external rotation of both shoulders he developed pain, paraesthesia and disappearance of the right radial artery pulsation. CT of the right shoulder in the neutral position demonstrated the clavicle-to-first rib distance of 5.5 mm, MRI showed the clavicular bone callus had a mass effect with effacement of anterior fat adjacent to the brachial plexus cords. He was diagnosed with thoracic outlet syndrome and underwent a corrective right clavicle osteotomy with the use of an AcuMed superior clavicle plate. PMID:26045517

[The modern TCM education of Tianjin].

PubMed

Xie, J

2016-11-28

School education had gradually become the mainstream of medical education at the turn of the Qing Dynasty and Republican period. In Tianjin, there were western medical education, including the Peiyang Medical College, Army Medical College, and Lu's Medical School, whereas, there was no traditional medical school at all. To check this defect, two private TCM medical schools, the Learning School of TCM, and the Tianjin TCM Institution were set up by Chen Zedong and Gu Jinren respectively through persistent endeavor. Meanwhile, correspondence school of TCM were established by Zhang Xichun, Wei Jiaqian, and Ma Leshan. Though more TCM schools were planned, including Tianjin Private School of TCM by Lu Zongren and Qian Boquan, North China Professional TCM School by Zhang Yinqi and other colleagues, TCM Professional School by Zhang Dianju and the Tianjin Private Acu-Moxibustion School by Zhang Lihui, etc. All these did make their contributions to the training of TCM talents in modern times.

Violations of Gutenberg-Richter Relation in Anthropogenic Seismicity

NASA Astrophysics Data System (ADS)

Urban, Pawel; Lasocki, Stanislaw; Blascheck, Patrick; do Nascimento, Aderson Farias; Van Giang, Nguyen; Kwiatek, Grzegorz

2016-05-01

Anthropogenic seismicity (AS) is the undesired dynamic rockmass response to technological processes. AS environments are shallow hence their heterogeneities have important impact on AS. Moreover, AS is controlled by complex and changeable technological factors. This complicated origin of AS explains why models used in tectonic seismicity may be not suitable for AS. We study here four cases of AS, testing statistically whether the magnitudes follow the Gutenberg-Richter relation or not. The considered cases include the data from Mponeng gold mine in South Africa, the data observed during stimulation of geothermal well Basel 1 in Switzerland, the data from Acu water reservoir region in Brazil and the data from Song Tranh 2 hydropower plant region in Vietnam. The cases differ in inducing technologies, in the duration of periods in which they were recorded, and in the ranges of magnitudes. In all four cases the observed frequency-magnitude distributions statistically significantly differ from the Gutenberg-Richter relation. Although in all cases the Gutenberg-Richter b value changed in time, this factor turns out to be not responsible for the discovered deviations from the Gutenberg-Richter-born exponential distribution model. Though the deviations from Gutenberg-Richter law are not big, they substantially diminish the accuracy of assessment of seismic hazard parameters. It is demonstrated that the use of non-parametric kernel estimators of magnitude distribution functions improves significantly the accuracy of hazard estimates and, therefore, these estimators are recommended to be used in probabilistic analyses of seismic hazard caused by AS.

Effect of Surface Treatment, Silane, and Universal Adhesive on Microshear Bond Strength of Nanofilled Composite Repairs.

PubMed

Fornazari, I A; Wille, I; Meda, E M; Brum, R T; Souza, E M

 The aim of this study was to evaluate the effect of surface treatment and universal adhesive on the microshear bond strength of nanoparticle composite repairs.  One hundred and forty-four specimens were built with a nanofilled composite (Filtek Supreme Ultra, 3M ESPE). The surfaces of all the specimens were polished with SiC paper and stored in distilled water at 37°C for 14 days. Half of the specimens were then air abraded with Al 2 O 3 particles and cleaned with phosphoric acid. Polished specimens (P) and polished and air-abraded specimens (A), respectively, were randomly divided into two sets of six groups (n=12) according to the following treatments: hydrophobic adhesive only (PH and AH, respectively), silane and hydrophobic adhesive (PCH, ACH), methacryloyloxydecyl dihydrogen phosphate (MDP)-containing silane and hydrophobic adhesive (PMH, AMH), universal adhesive only (PU, AU), silane and universal adhesive (PCU, ACU), and MDP-containing silane and universal adhesive (PMU, AMU). A cylinder with the same composite resin (1.1-mm diameter) was bonded to the treated surfaces to simulate the repair. After 48 hours, the specimens were subjected to microshear testing in a universal testing machine. The failure area was analyzed under an optical microscope at 50× magnification to identify the failure type, and the data were analyzed by three-way analysis of variance and the Games-Howell test (α=0.05).  The variables "surface treatment" and "adhesive" showed statistically significant differences for p<0.05. The highest mean shear bond strength was found in the ACU group but was not statistically different from the means for the other air-abraded groups except AH. All the polished groups except PU showed statistically significant differences compared with the air-abraded groups. The PU group had the highest mean among the polished groups. Cohesive failure was the most frequent failure mode in the air-abraded specimens, while mixed failure was the most common mode in the polished specimens.  While air abrasion with Al 2 O 3 particles increased the repair bond strength of the nanoparticle composite, the use of MDP-containing silane did not lead to a statistically significant increase in bond strength. Silane-containing universal adhesive on its own was as effective as any combination of silane and adhesive, particularly when applied on air-abraded surfaces.

Three-dimensional mathematical model to simulate groundwater flow in the lower Palar River basin, southern India

NASA Astrophysics Data System (ADS)

Senthilkumar, M.; Elango, L.

A three-dimensional mathematical model to simulate regional groundwater flow was used in the lower Palar River basin, in southern India. The study area is characterised by heavy ion of groundwater for agricultural, industrial and drinking water supplies. There are three major pumping stations on the riverbed apart from a number of wells distributed over the area. The model simulates groundwater flow over an area of about 392 km2 with 70 rows, 40 columns, and two layers. The model simulated a transient-state condition for the period 1991-2001. The model was calibrated for steady- and transient-state conditions. There was a reasonable match between the computed and observed heads. The transient model was run until the year 2010 to forecast groundwater flow under various scenarios of overpumping and less recharge. Based on the modelling results, it is shown that the aquifer system is stable at the present rate of pumping, excepting for a few locations along the coast where the groundwater head drops from 0.4 to 1.81 m below sea level during the dry seasons. Further, there was a decline in the groundwater head by 0.9 to 2.4 m below sea level in the eastern part of the area when the aquifer system was subjected to an additional groundwater withdrawal of 2 million gallons per day (MGD) at a major pumping station. Les modèles mathématiques en trois dimensions de l'écoulement souterrain régional sont très utiles pour la gestion des ressources en eau souterraine, car ils permettent une évaluation des composantes des processus hydrologiques et fournissent une description physique de l'écoulement de l'eau dans un aquifère. Une telle modélisation a été entreprise sur une partie du bassin inférieur de la rivière Palar, dans le sud de l'Inde. La zone d'étude est caractérisée par des prélèvements importants d'eau souterraine pour l'agriculture, l'industrie et l'eau potable. Il existe trois grandes stations de pompage sur la rivière en plus d'un certain nombre de puits répartis dans cette région. Le modèle simule l'écoulement souterrain dans une région d'environ 392 km2 avec 70 rangs, 40 colonnes et deux couches. Le modèle a fonctionné en régime transitoire en utilisant une approximation aux différences finies d'une équation différentielle partielle en trois dimensions de l'écoulement souterrain dans cet aquifère pour la période 1991-2001. Le modèle a été calibré pour des conditions de régime permanent et transitoire. Les charges hydrauliques calculées étaient en bon accord avec celles observées. Sur la base des résultats du modèle, il est apparu que le système aquifère est stable pour ce taux de pompage, excepté en quelques sites le long de la côte où l'eau marine a pénétré 50-100 m dans les terres. Le modèle transitoire a tourné jusqu'en 2010 afin de prévoir l'écoulement souterrain dynamique pour différents scénarios de pompage excessif et de recharge réduite. Il se produit un abaissement de la piézométrie de la nappe de 0.6 à 0.8 m dans la partie orientale, alors que l'aquifère est soumis à un prélèvement supplémentaire de 8,000 m3/jour à l'une des stations principales de pompage. Même avec le niveau actuel de pompage, la piézométrie de la nappe descendrait sous le niveau de la mer au cours des saisons sèches. Le modèle prédit le fonctionnement du système aquifère sous différentes conditions de stress hydrologique. Los modelos tridimensionales de flujo de aguas subterráneas son útiles para gestionar los recursos hídricos subterráneos, ya que proporcionan una aproximación a los diversos procesos hidrológicos y una descripción cuantitativa del flujo de agua en el acuífero. Se ha desarrollado un estudio de modelación de este tipo en una parte de la cuenca baja del río Palar, en el Sur de la India. Esta zona se caracteriza por las intensas extracciones de aguas subterráneas para usos agrícolas, industriales y domésticos. Hay tres estaciones de bombeo principales en el río, además de numerosos pozos distribuidos por la zona. El modelo simula el flujo de las aguas subterráneas en una superficie de 392 km2 por medio de 70 filas, 40 columnas y 2 capas. El modelo ha sido empleado en condiciones transitorias, por medio de la aproximación en diferencias finitas de las ecuaciones diferenciales parciales en tres dimensiones del flujo en el acuífero durante el período 1991-2001. Se ha calibrado el modelo en condiciones permanentes y transitorias. El ajuste entre los niveles calculados y medidos es razonable. A partir de los resultados de la modelación, se ha obtenido que el sistema acuífero es estable con la tasa de bombeo utilizada, exceptuando unos pocos emplazamientos a lo largo de la costa, donde se ha dado lugar a fenómenos de intrusión marina en una distancia de 50-100 m. El modelo transitorio ha sido ejecutado hasta el año 2010 para predecir el flujo dinámico bajo diversos escenarios de sobreexplotación y de reducción de la recarga. Se produce una disminución en los niveles piezométricos de 0.6 a 0.8 m en la zona oriental, donde el sistema acuífero está sometido a una extracción adicional de 2 millones de galones por día en la estación principal de bombeo. Incluso con las extracciones actuales, los niveles piezométricos se sitúan bajo el nivel del mar durante las épocas secas. El modelo predice el comportamiento de este sistema acuífero bajo varias condiciones de presión hidrológica.

Distributed and recoverable digital control system

NASA Technical Reports Server (NTRS)

Stange, Kent (Inventor); Hess, Richard (Inventor); Kelley, Gerald B (Inventor); Rogers, Randy (Inventor)

2010-01-01

A real-time multi-tasking digital control system with rapid recovery capability is disclosed. The control system includes a plurality of computing units comprising a plurality of redundant processing units, with each of the processing units configured to generate one or more redundant control commands. One or more internal monitors are employed for detecting data errors in the control commands. One or more recovery triggers are provided for initiating rapid recovery of a processing unit if data errors are detected. The control system also includes a plurality of actuator control units each in operative communication with the computing units. The actuator control units are configured to initiate a rapid recovery if data errors are detected in one or more of the processing units. A plurality of smart actuators communicates with the actuator control units, and a plurality of redundant sensors communicates with the computing units.

28 CFR 541.50 - Release from a control unit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... general population of the institution which has a control unit. [49 FR 32991, Aug. 17, 1984, as amended at... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Release from a control unit. 541.50... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.50 Release from a control unit...

28 CFR 541.50 - Release from a control unit.

Code of Federal Regulations, 2013 CFR

2013-07-01

... general population of the institution which has a control unit. [49 FR 32991, Aug. 17, 1984, as amended at... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Release from a control unit. 541.50... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.50 Release from a control unit...

28 CFR 541.50 - Release from a control unit.

Code of Federal Regulations, 2012 CFR

2012-07-01

... general population of the institution which has a control unit. [49 FR 32991, Aug. 17, 1984, as amended at... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Release from a control unit. 541.50... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.50 Release from a control unit...

28 CFR 541.50 - Release from a control unit.

Code of Federal Regulations, 2011 CFR

2011-07-01

... general population of the institution which has a control unit. [49 FR 32991, Aug. 17, 1984, as amended at... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Release from a control unit. 541.50... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.50 Release from a control unit...

28 CFR 541.50 - Release from a control unit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... general population of the institution which has a control unit. [49 FR 32991, Aug. 17, 1984, as amended at... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Release from a control unit. 541.50... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.50 Release from a control unit...

The instrument control unit of SPICA SAFARI: a macro-unit to host all the digital control functionalities of the spectrometer

NASA Astrophysics Data System (ADS)

Di Giorgio, Anna Maria; Biondi, David; Saggin, Bortolino; Shatalina, Irina; Viterbini, Maurizio; Giusi, Giovanni; Liu, Scige J.; Cerulli-Irelli, Paquale; Van Loon, Dennis; Cara, Christophe

2012-09-01

We present the preliminary design of the Instrument Control Unit (ICU) of the SpicA FAR infrared Instrument (SAFARI), an imaging Fourier Transform Spectrometer (FTS) designed to give continuous wavelength coverage in both photometric and spectroscopic modes from around 34 to 210 µm. Due to the stringent requirements in terms of mass and volume, the overall SAFARI warm electronics will be composed by only two main units: Detector Control Unit and ICU. ICU is therefore a macro-unit incorporating the four digital sub-units dedicated to the control of the overall instrument functionalities: the Cooler Control Unit, the Mechanism Control Unit, the Digital processing Unit and the Power Supply Unit. Both the mechanical solution adopted to host the four sub-units and the internal electrical architecture are presented as well as the adopted redundancy approach.

Beat to beat 3-dimensional intracardiac echocardiography: theoretical approach and practical experiences.

PubMed

Stapf, Daniel; Franke, Andreas; Schreckenberg, Marcus; Schummers, Georg; Mischke, Karl; Marx, Nikolaus; Schauerte, Patrick; Knackstedt, Christian

2013-04-01

Three-dimensional (3D)-imaging provides important information on cardiac anatomy during electrophysiological procedures. Real-time updates of modalities with high soft-tissue contrast are particularly advantageous during cardiac procedures. Therefore, a beat to beat 3D visualization of cardiac anatomy by intracardiac echocardiography (ICE) was developed and tested in phantoms and animals. An electronic phased-array 5-10 MHz ICE-catheter (Acuson, AcuNav/Siemens Medical Solutions USA/64 elements) providing a 90° sector image was used for ICE-imaging. A custom-made mechanical prototype controlled by a servo motor allowed automatic rotation of the ICE-catheter around its longitudinal axis. During a single heartbeat, the ICE-catheter was rotated and 2D-images were acquired. Reconstruction into a 3D volume and rendering by a prototype software was performed beat to beat. After experimental validation using a rigid phantom, the system was tested in an animal study and afterwards, for quantitative validation, in a dynamic phantom. Acquisition of beat to beat 3D-reconstruction was technically feasible. However, twisting of the ICE-catheter shaft due to friction and torsion was found and rotation was hampered. Also, depiction of catheters was not always ensured in case of parallel alignment. Using a curved sheath for depiction of cardiac anatomy there was no congruent depiction of shape and dimension of static and moving objects. Beat to beat 3D-ICE-imaging is feasible. However, shape and dimension of static and moving objects cannot always be displayed with necessary steadiness as needed in the clinical setting. As catheter depiction is also limited, clinical use seems impossible.

Structural investigations of human hairs by spectrally resolved ellipsometry

NASA Astrophysics Data System (ADS)

Chan, Danny; Schulz, Benjamin; Rübhausen, Michael; Wessel, Sonya; Wepf, Roger

2006-01-01

Human hair is a biological layered system composed of two major layers, the cortex and the cuticle. We show spectrally resolved ellipsometry measurements of the ellipsometric parameters Ψ and Δ of single human hairs. The spectra reflect the layered nature of hair and the optical anisotropy of the hair's structure. In addition, measurements on strands of human hair show a high reproducibility of the ellipsometric parameters for different hair fiber bundles from the same person. Based on the measurements, we describe a dielectric model of hair that explains the spectra in terms of the dielectric properties of the major parts of hair and their associated layer thicknesses. In addition, surface roughness effects modeled by a roughness layer with a complex refractive index given by an effective medium approach can be seen to have a significant effect on the measurements. We derive values for the parameters of the cuticle surface roughness layer of the thickness dACu=273 to 360 nm and the air inclusion fA=0.6 to 5.7%.

AFOSR (Air Force Office of Scientific Research) Technical Report Summaries.

DTIC Science & Technology

1985-12-01

4 uu -~ - c a IL ~ cm a.Cu m in’ em> 0 4.- In 0- ’-. 84 * . m.aof7ai x-’ 4e lox C mui EL > CL >’ W (A 4S .UC Z ~L wn 0a 4- 40 MA- a (aIm-lA kLu P4...U > 4. v > 0; i Csc 0 4. .0 Co L Zm.- 0L W-4 - 43 (A in - om p4’c a :Lia ; n J o 30win 4- ! ~ de ~ 0’~ - 0 - 41 CA. L 1-s- z44 1-. 44U . 0 L4 0 4 - L...t I - I.- o 16 00 0 0 00 C~0 0 0 lz 4 U 4 U 4 4 U 4 404 U B 8 Q 00 L S 0). de U sCC C4 . A 00 a IA - I-- C40 - U LO 0 C IF -u LL IA Sgo .0 z-4- -4

[General survey and protection of intangible cultural heritage in traditional medicine in Zhejiang Province].

PubMed

Zhu, D M

2017-07-28

From January 2003 to October 2008, the Zhejiang Provincial Department of Culture, together with the Intangible Cultural Heritage Management Department of 11 cities and counties, including Hangzhou, Ningbo, Wenzhou, Huzhou, Jiaxing, Shaoxing, Jinhua, Quzhou, Zhoushan, Taizhou, Lishui, surveyed the Province's intangible cultural heritage in traditional medicine, with a total of 7849 items, including 7 kinds of traditional medicine in 8 major categories: living Chinese medicine culture, ethnic medicine, acu-moxibustion, osteopathic therapy, unique therapies, and Chinese crude drugs, herbal medicine and traditional Chinese medicine preparation, TCM processing.Among them, 9 items have been included in the Representative Project List of National Traditional Medicine Intangible Cultural Heritage, 18 items were listed in Representative Project Directory of Zhejiang Traditional Medicine Intangible Cultural Heritage.Theprotection and inheritance of traditional of the intangible heritage of traditional medicine in Zhejiang province are mainly through the 4 batches of master guidance apprentices.In addition, protection is carried out through organizational support, literature systematization and other measures.

Utilization of LANDSAT orbital imagery in the soil survey processes at Rio Grande do Norte state

NASA Technical Reports Server (NTRS)

Formaggio, A. R. (Principal Investigator)

1984-01-01

Pedologic photointerpretative criteria adapted to LANDSAT orbital imagery were used: drainage (pattern, integration degree, density and uniformity degree); relief (pattern, dissection degree and crest lines); photographic texture, photographic tonnality, and the land use (type, glebas size and intensity of use). The performance of the imagery as an auxiliar tool in the soil survey processes, at Rio Grande do Norte State was evaluated. The drainage and relief elements were easily extracted from the imagery and also ones that provided the greatest deductive possibility about pedologic boundaries. Other analyzed criteria were considered only auxiliaries, corroborating some soil limits in the evidences convergence phase. The principal pedologic dominions of the 30,000 sq km are covered by the same LANDSAT image (WRS 359/16) were delimited with good precision: (1) fluvial plains, beaches, dunes and coastal mangroves; (2) North Coast line Plateau; (3) Acu Sandstone Zone; (4) residual plateaus of the Tertiary; and (6) plains of the embasement.

Physics of the Jovian Magnetosphere

NASA Astrophysics Data System (ADS)

Dessler, A. J.

2002-08-01

List of tables; Foreword James A. Van Allen; Preface; 1. Jupiter's magnetic field and magnetosphere Mario H. Acuña, Kenneth W. Behannon and J. E. P. Connerney; 2. Ionosphere Darrell F. Strobel and Sushil K. Atreya; 3. The low-energy plasma in the Jovian magnetosphere J. W. Belcher; 4. Low-energy particle population S. M. Krimigis and E. C. Roelof; 5. High-energy particles A. W. Schardt and C. K. Goertz; 6. Spectrophotometric studies of the Io torus Robert A. Brown, Carl B. Pilcher and Darrell F. Strobel; 7. Phenomenology of magnetospheric radio emissions T. D. Carr, M. D. Desch and J. K. Alexander; 8. Plasma waves in the Jovian magnetosphere D. A. Gurnett and F. L. Scarf; 9. Theories of radio emissions and plasma waves Melvyn L. Goldstein and C. K. Goertz; 10. Magnetospheric models T. W. Hill, A. J. Dessler and C. K. Goertz; 11. Plasma distribution and flow Vytenis M. Vasyliunas; 12. Microscopic plasma processes in the Jovian magnetosphere Richard Mansergh Thorne; Appendixes; References; Index.

Reactor vessel annealing system

DOEpatents

Miller, Phillip E.; Katz, Leonoard R.; Nath, Raymond J.; Blaushild, Ronald M.; Tatch, Michael D.; Kordalski, Frank J.; Wykstra, Donald T.; Kavalkovich, William M.

1991-01-01

A system for annealing a vessel (14) in situ by heating the vessel (14) to a defined temperature, composed of: an electrically operated heater assembly (10) insertable into the vessel (14) for heating the vessel (14) to the defined temperature; temperature monitoring components positioned relative to the heater assembly (10) for monitoring the temperature of the vessel (14); a controllable electric power supply unit (32-60) for supplying electric power required by the heater assembly (10); a control unit (80-86) for controlling the power supplied by the power supply unit (32-60); a first vehicle (2) containing the power supply unit (32-60); a second vehicle (4) containing the control unit (80-86); power conductors (18,22) connectable between the power supply unit (32-60) and the heater unit (10) for delivering the power supplied by the power supply unit (32-60) to the heater assembly (10); signal conductors (20,24) connectable between the temperature monitoring components and the control unit (80-86) for delivering temperature indicating signals from the temperature monitoring components to the control unit (80-86); and control conductors (8) connectable between the control unit (80-86) and the power supply unit (32-60) for delivering to the power supply unit (32-60) control signals for controlling the level of power supplied by the power supply unit (32-60) to the heater assembly (10).

28 CFR 541.49 - Review of control unit placement.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Once every 30 days, the control unit team, comprised of the control unit manager and other members... required to attend the team meeting in order to be eligible for the previous month's stay in the control unit to be credited towards the projected duration of confinement in that unit. The unit team shall...

21 CFR 211.22 - Responsibilities of quality control unit.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Responsibilities of quality control unit. 211.22... Personnel § 211.22 Responsibilities of quality control unit. (a) There shall be a quality control unit that... have been fully investigated. The quality control unit shall be responsible for approving or rejecting...

21 CFR 211.22 - Responsibilities of quality control unit.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Responsibilities of quality control unit. 211.22... Personnel § 211.22 Responsibilities of quality control unit. (a) There shall be a quality control unit that... have been fully investigated. The quality control unit shall be responsible for approving or rejecting...

Method and system for redundancy management of distributed and recoverable digital control system

NASA Technical Reports Server (NTRS)

Stange, Kent (Inventor); Hess, Richard (Inventor); Kelley, Gerald B (Inventor); Rogers, Randy (Inventor)

2012-01-01

A method and system for redundancy management is provided for a distributed and recoverable digital control system. The method uses unique redundancy management techniques to achieve recovery and restoration of redundant elements to full operation in an asynchronous environment. The system includes a first computing unit comprising a pair of redundant computational lanes for generating redundant control commands. One or more internal monitors detect data errors in the control commands, and provide a recovery trigger to the first computing unit. A second redundant computing unit provides the same features as the first computing unit. A first actuator control unit is configured to provide blending and monitoring of the control commands from the first and second computing units, and to provide a recovery trigger to each of the first and second computing units. A second actuator control unit provides the same features as the first actuator control unit.

Bulk oxides: asymmetry between p-and n-type transport properties

NASA Astrophysics Data System (ADS)

Maignan, Antioine

2015-03-01

The thermoelectric power (TEP) of transition metal oxides shows large difference depending on the sign of the charge carriers. In electron-doped oxides, the best TEs in terms of the figure of merit are heavily doped transparent conductors (as doped ZnO). The physics is very similar to that of semiconductors, though the defects chemistry differs: the existence of planar defects created by the doping elements, is far from the random distribution in semiconductors. In contrast the best p-types are layered cobaltites (CdI2 -type layers with edge-shared CoO6 octahedras). The Co cations adopt a low spin state. Both electronic correlations and spin entropy have to be considered to explain the S(T) curve for T <150K, whereas for T>150K, the spin/orbital configurations and the doping level in the generalized Heikes formula are dominating. This description supported by the results obtained for perovskite ruthenates was recently unvalidated for the quadruple perovskite ACu3Ru4O12, showing very different S(T) without S saturation up to ~ 900K. Their Pauli paramagnetism enlights the role of the spins upon thermopower. Similarly, searching for other n-types, interesting TE properties have been found in Ba1.2Mn8O16: the S(T) evidences a charge/orbital ordering in this manganite (vMn = 3.7) coupled to an abrupt change in the unit-cell volume. Ba1.2Mn8O16, although of n-type, exhibits a cst. | S | ~ 92 μV.K-1 for T>400K, explained by the generalized Heikes formula rather used for p-type. This difference with other n-type oxides is related to the Mn3+/Mn4+ magnetism and the contribution of eg orbitals for the transport properties. In this presentation, the richness of the TE properties of metal transition oxides will be emphasized focusing on the important role of the spins.

Rapid fibrin plug formation within cutaneous ablative fractional CO2 laser lesions.

PubMed

Kositratna, Garuna; Evers, Michael; Sajjadi, Amir; Manstein, Dieter

2016-02-01

Ablative fractional laser procedures have been shown to facilitate topical drug delivery into the skin. Past studies have mainly used ex vivo models to demonstrate enhanced drug delivery and in vivo studies have investigated laser created channels over a time course of days and weeks rather than within the first few minutes and hours after exposures. We have noticed rapid in vivo fibrin plug formation within ablative fractional laser lesions impairing passage through the laser created channels. In vivo laser exposures were performed in a porcine model. A fractional CO2 laser (AcuPulse™ system, AcuScan 120™ handpiece, Lumenis, Inc., Yokneam, Israel) was programmed in quasi-continuous wave (QCW) mode, at 40W, 50 mJ per pulse, 5% coverage, nominal 120 µm spot size, 8 × 8 mm square pattern, 169 MTZs per scan. Six millimeters punch biopsies were procured at 0, 2, 5, 10, 15, 30, 60, 90 minutes after completion of each scan, then fixed in 10% formalin. 12 repeats were performed of each time point. Skin samples were processed for serial vertically cut paraffin sections (5 μm collected every 25 μm) then H&E and special immunohistochemistry staining for fibrin and platelet. Dimensions of Microscopic Treatment Zones (MTZs) and extent of fibrin plug were assessed and quantified histologically. Ex vivo laser exposures of the identical laser parameter were performed on porcine and human skin at different storage conditions. Histology procured at various predetermined time intervals after in vivo fractional CO2 laser exposures revealed a rapidly forming fibrin plug initiating at the bottom of the MTZ lesions. At longer time intervals, the fibrin plug was extending towards the superficial sections. Within the first 5 minutes, more than 25% length of the entire laser-ablated channel was filled with a fibrin plug. With increased time intervals, the cavity was progressively filled with a fibrin plug. At 90 minutes, more than 90% length of the entire laser-ablated channel was occluded. Ex vivo exposures failed to produce any significant fibrin plug formation. The current study has demonstrated rapid fibrin plug formation after ablative fractional laser procedures. It was shown that the passage through laser created pathways is critically time dependent for in vivo exposures. In contrast, ex vivo exposures do not exhibit such time dependent passage capacity. In particular, drug, substance, and cell delivery studies for ablative fractional laser treatments should take early fibrin plug formation into consideration and further investigate the impact on transdermal delivery. © 2015 Wiley Periodicals, Inc.

Exploration of an alluvial aquifer in Oman by time-domain electromagnetic sounding

NASA Astrophysics Data System (ADS)

Young, M. E.; de Bruijn, R. G. M.; Al-Ismaily, A. Salim

One-third of the population of Oman depends upon groundwater extracted from the alluvium of the Batinah Plain, on the coast of the Gulf of Oman. Deep geophysical exploration techniques were used to determine the depth and nature of the alluvium and the boundaries of the aquifer. The base and structural controls of the alluvial basin at its contact with Tertiary marine sediments and Cretaceous ophiolite were mapped with seismic reflection data, recorded originally for oil exploration. The base of the alluvium dips northward from the foothills of the Northern Oman Mountains, reaching a maximum depth of 2000m at the coast. The varying facies of the alluvium are grossly characterised by different, overlapping ranges of electrical resistivity, depending largely on the clay content and degree of cementation. Resistivities near the coast are reduced by saline intrusion. These variations of resistivity were mapped with time-domain electromagnetic sounding along 400km of profile, to distinguish among the three zones of the alluvial aquifer. The wedge of saline intrusion was also delineated, up to 10km from the coast. The thickness of the saturated gravel aquifer ranges from 20-160m in an area greater than 600km2. Résumé Un tiers de la population d'Oman est alimenté par de l'eau souterraine pompée dans les alluvions de la plaine de Batinah, sur la côte du golfe d'Oman. Des techniques d'exploration géophysique profonde ont été mises en oeuvre pour déterminer la profondeur et la nature des alluvions et les limites de l'aquifère. La base et les contrôles structuraux du bassin alluvial au contact des sédiments marins tertiaires et des ophiolites crétacées ont été cartographiés à partir des données de sismique réflexion obtenues à l'origine pour la recherche pétrolière. La base des alluvions plonge vers le nord à partir du piémont du massif septentrional d'Oman, pour atteindre une profondeur maximale de 2000m sur la côte. Les divers faciès alluviaux sont grossièrement caractérisés par des différentes gammes de résistivitéélectrique se recouvrant, dépendant surtout de la teneur en argiles et du degré de cimentation. Les résistivités près de la côte diminuent du fait de l'intrusion marine. Ces variations de résistivité ont été cartographiées à partir de 400km de profils électromagnétiques, dans le domaine temporel ; trois zones ont été distinguées dans l'aquifère alluvial. Le biseau salé a aussi été délimité, jusqu'à 10km de la côte. L'épaisseur de la partie saturée des graviers va de 20-160m sur une étendue supérieure à 600km2. Resumen Un tercio de la población de Omán depende de las aguas subterráneas extraídas del aluvial de la Llanura de Batinah, en la costa del Golfo de Omán. Para determinar la profundidad y naturaleza del aluvial, así como los límites del acuífero, se han usado técnicas de exploración geofísica profunda. El basamento y los límites estructurales del aluvial en su contacto con los sedimentos marinos del Terciario y la ofiolita cretácica se obtuvieron mediante sísmica de reflexión, registrada previamente en campañas de exploración petrolífera. La base del aluvial buza hacia el norte desde el pie de las Montañas del Norte de Omán, alcanzando una profundidad máxima de 2000m en la costa. Las distintas facies del aluvial están caracterizadas por rangos distintos, pero superpuestos, de resistividad eléctrica, dependiendo del contenido en arcillas y del grado de cementación. Las resistividades cerca de la costa se reducen por la intrusión salina. Estas variaciones de resistividad se obtuvieron con registros electromagnéticos a lo largo de un perfil de 400km, con el objetivo de distinguir las tres zonas del acuífero aluvial. También se pudo obtener la geometría de la cuña de intrusión, que llega hasta 10km de la costa. El espesor de las gravas saturadas que forman el acuífero oscila entre los 20-160m en un área superior a 600km2.

Engine speed control apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishii, M.; Miyazaki, M.; Nakamura, N.

1986-11-04

This patent describes an engine speed control apparatus. The system comprises an actuator for adjusting an engine speed, a first unit for computing a desired engine speed, a second unit for detecting the actual engine speed, and a third unit for detecting the difference between the outputs of the first and second units. The system also includes a fourth unit for computing a control pulse width for the actuator in accordance with the output of the third unit, a fifth unit for generating a control signal, a sixth unit for driving the actuator in response to the output of themore » fifth unit, and a seventh unit for computing an optimal halt time to interrupt the driving of the actuator. The actuator is driven intermittently in conformity in the control pulse width and the halt time.« less

Storage characteristics of multiple-donor pooled red blood cells compared to single-donor red blood cell units.

PubMed

Mathur, Aabhas; Chowdhury, Raquibul; Hillyer, Christopher D; Mitchell, W Beau; Shaz, Beth H

2016-12-01

Each unit of blood donated is processed and stored individually resulting in variability in the amount of red blood cells (RBCs) collected, RBC properties, and the 24-hour posttransfusion RBC survivability. As a result, each unit differs in its ability to deliver oxygen and potentially its effects on the recipient. The goal of this study was to investigate the storage of pooled RBCs from multiple donors in comparison to control standard RBC units. Two units of irradiated, leukoreduced RBCs of same ABO, D, E, C, and K antigen phenotype were collected from each of five donors using apheresis. One unit from each donor was pooled in a 2-L bag and remaining units were used as controls. After being pooled, RBCs were separated in five bags and stored at 4°C along with the controls. Quality indexes were measured on Days 2, 14, and 28 for all the units. Adenosine triphosphate assays for both pooled and controls showed a slight decrease from Day 2 to Day 28 (pooled/control from 5.22/5.24 to 4.35/4.33 µmol/g hemoglobin [Hb]). 2,3-Diphosphoglycerate was successfully rejuvenated for all RBC units on Day 28 (pooled 11.46 µmol/g Hb; control 11.86 µmol/g Hb). The results showed a nonsignificant difference between pooled and control units, with a general trend of lower standard deviation for pooled units when compared to controls. Pooled units have reduced unit-to-unit variability. Future exploration of their immunogenicity is required before using pooled units for transfusion. © 2016 AABB.

Groundwater components in the alluvial aquifer of the alpine Rhone River valley, Bois de Finges area, Wallis Canton, Switzerland

NASA Astrophysics Data System (ADS)

Schürch, Marc; Vuataz, François-D.

2000-09-01

Source, type, and quantity of various components of groundwater, as well as their spatial and temporal variations were determined by different hydrochemical methods in the alluvial aquifer of the upper Rhone River valley, Bois de Finges, Wallis Canton, Switzerland. The methods used are hydrochemical modeling, stable-isotope analysis, and chemical analysis of surface water and groundwater. Sampling during high- and low-water periods determined the spatial distribution of the water chemistry, whereas monthly sampling over three years provided a basis for understanding seasonal variability. The physico-chemical parameters of the groundwater have spatial and seasonal variations. The groundwater chemical composition of the Rhone alluvial aquifer indicates a mixing of weakly mineralized Rhone River water and SO4-rich water entering from the south side of the valley. Temporal changes in groundwater chemistry and in groundwater levels reflect the seasonal variations of the different contributors to groundwater recharge. The Rhone River recharges the alluvial aquifer only during the summer high-water period. Résumé. Origine, type et quantité de nombreux composants d'eau de l'aquifère alluvial dans la vallée supérieure du Rhône, Bois de Finges, Valais, Suisse, ainsi que leurs variations spatiales et temporelles ont été déterminés par différentes méthodes hydrochimiques. Les méthodes utilisées sont la modélisation hydrochimique, les isotopes stables, ainsi que l'échantillonnage en période de hautes eaux et de basses eaux pour étudier la distribution spatiale de la composition chimique, alors qu'un échantillonnage mensuel pendant trois ans sert à comprendre les processus de la variabilité saisonnière. Les paramètres physico-chimiques des eaux souterraines montrent des variations spatiales et saisonnières. La composition chimique de l'aquifère alluvial du Rhône indique un mélange entre une eau peu minéralisée venant du Rhône et une eau sulfatée s'écoulant du versant sud. La modification temporelle des paramètres chimiques des eaux souterraines et de la piézométrie reflètent les variations saisonnières des apports d'eau de la nappe souterraine. En période de hautes eaux durant l'été, seul le Rhône recharge l'aquifère alluvial. Resumen. Se ha determinado el origen, tipo y cantidad de diversos elementos de las aguas subterráneas en el acuífero aluvial del valle superior del río Ródano (Bois de Finges, Cantón de Wallis, Suiza), así como sus variaciones espaciales y temporales, mediante métodos hidroquímicos. Entre las herramientas utilizadas, se incluye la modelación hidroquímica, el análisis de isótopos estables y el análisis químico de aguas superficiales y subterráneas. El muestreo en épocas de estiaje y lluvias sirvió para determinar la distribución espacial de la química del agua, mientras que la variabilidad estacional fue caracterizada por medio de muestreos mensuales durante un período de tres años. Los parámetros físicoquímicos de las aguas subterráneas muestran variaciones espaciales y estacionales. La composición química de las aguas subterráneas del acuífero aluvial del río Ródano indica que hay mezcla entre las aguas débilmente mineralizadas del río y las aguas cargadas en sulfato (SO4-2) que proceden de la parte meridional de valle. Los cambios temporales en la química de las aguas subterráneas y en los niveles piezométricos reflejan las variaciones estacionales de las diferentes contribuciones de la recarga. El río Ródano recarga al acuífero aluvial únicamente durante el período estival, cuando el caudal es elevado.

21 CFR 870.4300 - Cardiopulmonary bypass gas control unit.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Cardiopulmonary bypass gas control unit. 870.4300... (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Surgical Devices § 870.4300 Cardiopulmonary bypass gas control unit. (a) Identification. A cardiopulmonary bypass gas control unit is a device used...

21 CFR 870.4300 - Cardiopulmonary bypass gas control unit.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiopulmonary bypass gas control unit. 870.4300... (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Surgical Devices § 870.4300 Cardiopulmonary bypass gas control unit. (a) Identification. A cardiopulmonary bypass gas control unit is a device used...

Substantiation of Structure of Adaptive Control Systems for Motor Units

NASA Astrophysics Data System (ADS)

Ovsyannikov, S. I.

2018-05-01

The article describes the development of new electronic control systems, in particular motor units, for small-sized agricultural equipment. Based on the analysis of traffic control systems, the main course of development of the conceptual designs of motor units has been defined. The systems aimed to control the course motion of the motor unit in automatic mode using the adaptive systems have been developed. The article presents structural models of the conceptual motor units based on electrically controlled systems by the operation of drive motors and adaptive systems that make the motor units completely automated.

Deflate decompressor

DOEpatents

Hamlet, Jason R [Albuquerque, NM; Robertson, Perry J [Albuquerque, NM; Pierson, Lyndon G [Albuquerque, NM; Olsberg, Ronald R [Albuquerque, NM

2012-02-28

A deflate decompressor includes at least one decompressor unit, a memory access controller, a feedback path, and an output buffer unit. The memory access controller is coupled to the decompressor unit via a data path and includes a data buffer to receive the data stream and temporarily buffer a first portion the data stream. The memory access controller transfers fixed length data units of the data stream from the data buffer to the decompressor unit with reference to a memory pointer pointing into the memory buffer. The feedback path couples the decompressor unit to the memory access controller to feed back decrement values to the memory access controller for updating the memory pointer. The decrement values each indicate a number of bits unused by the decompressor unit when decoding the fixed length data units. The output buffer unit buffers a second portion of the data stream after decompression.

NIC atomic operation unit with caching and bandwidth mitigation

DOEpatents

Hemmert, Karl Scott; Underwood, Keith D.; Levenhagen, Michael J.

2016-03-01

A network interface controller atomic operation unit and a network interface control method comprising, in an atomic operation unit of a network interface controller, using a write-through cache and employing a rate-limiting functional unit.

Highly parallel reconfigurable computer architecture for robotic computation having plural processor cells each having right and left ensembles of plural processors

NASA Technical Reports Server (NTRS)

Fijany, Amir (Inventor); Bejczy, Antal K. (Inventor)

1994-01-01

In a computer having a large number of single-instruction multiple data (SIMD) processors, each of the SIMD processors has two sets of three individual processor elements controlled by a master control unit and interconnected among a plurality of register file units where data is stored. The register files input and output data in synchronism with a minor cycle clock under control of two slave control units controlling the register file units connected to respective ones of the two sets of processor elements. Depending upon which ones of the register file units are enabled to store or transmit data during a particular minor clock cycle, the processor elements within an SIMD processor are connected in rings or in pipeline arrays, and may exchange data with the internal bus or with neighboring SIMD processors through interface units controlled by respective ones of the two slave control units.

Daylight control system device and method

DOEpatents

Paton, John Douglas

2007-03-13

A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

Daylight control system, device and method

DOEpatents

Paton, John Douglas

2012-08-28

A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

Daylight control system device and method

DOEpatents

Paton, John Douglas

2009-12-01

A system and device for and a method of programming and controlling light fixtures is disclosed. A system in accordance with the present invention includes a stationary controller unit that is electrically coupled to the light fixtures. The stationary controller unit is configured to be remotely programmed with a portable commissioning device to automatically control the lights fixtures. The stationary controller unit and the portable commissioning device include light sensors, micro-computers and transceivers for measuring light levels, running programs, storing data and transmitting data between the stationary controller unit and the portable commissioning device. In operation, target light levels selected with the portable commissioning device and the controller unit is remotely programmed to automatically maintain the target level.

Interface For Fault-Tolerant Control System

NASA Technical Reports Server (NTRS)

Shaver, Charles; Williamson, Michael

1989-01-01

Interface unit and controller emulator developed for research on electronic helicopter-flight-control systems equipped with artificial intelligence. Interface unit interrupt-driven system designed to link microprocessor-based, quadruply-redundant, asynchronous, ultra-reliable, fault-tolerant control system (controller) with electronic servocontrol unit that controls set of hydraulic actuators. Receives digital feedforward messages from, and transmits digital feedback messages to, controller through differential signal lines or fiber-optic cables (thus far only differential signal lines have been used). Analog signals transmitted to and from servocontrol unit via coaxial cables.

[Portable multi-purpose device for monitoring of physiological informations].

PubMed

Tamura, T; Togawa, T

1983-05-01

Unconstrained system that measures physiological information as skin temperatures and heart rate per unit time of a human subject was developed. The system contained portable device included memory control unit, instrumentation unit, timer and batteries, read-out unit, test unit and verify unit. Total number of data and channels, and interval were selected by switches in the memory control unit. The data from the instrumentation unit were transferred to memory control unit and stored in the Erasable Programmable ROM (EPROM). After measurement, EPROM chip was taken off the memory control unit and put on the read-out unit which transferred the data to the microcomputer. The data were directly calculated and analyzed by microcomputer. In application of the instrumentation unit, 8-channel skin thermometer was developed and tested. After amplification, 8 analog signals were multiplexed and converted into the binary codes. The digital signals were sequentially transferred to memory control unit and stored in the EPROM under controlled signal. The accuracy of the system is determined primarily by the accuracy of the sensor of instrumentation unit. The overall accuracy of 8-channel skin thermometer is conservatively stated within 0.1 degree C. This may prove to be useful in providing an objective measurement of human subjects, and can be used in studying environmental effect for human body and sport activities in a large population setting.

Method and Apparatus for Improved Spatial Light Modulation

NASA Technical Reports Server (NTRS)

Soutar, Colin (Inventor); Juday, Richard D. (Inventor)

2000-01-01

A method and apparatus for modulating a light beam in an optical processing system is described. Preferably, an electrically-controlled polarizer unit and/or an analyzer unit are utilized in combination with a spatial light modulator and a controller. Preferably, the spatial light modulator comprises a pixelated birefringent medium such as a liquid crystal video display. The combination of the electrically controlled polarizer unit and analyzer unit make it simple and fast to reconfigure the modulation described by the Jones matrix of the spatial light modulator. A particular optical processing objective is provided to the controller. The controller performs calculations and supplies control signals to the polarizer unit, the analyzer unit, and the spatial light modulator in order to obtain the optical processing objective.

Method and Apparatus for Improved Spatial Light Modulation

NASA Technical Reports Server (NTRS)

Colin, Soutar (Inventor); Juday, Richard D. (Inventor)

1999-01-01

A method and apparatus for modulating a light beam in an optical processing system is described. Preferably, an electrically-controlled polarizer unit and/or an analyzer unit are utilized in combination with a spatial light modulator and a controller. Preferably, the spatial light modulator comprises a pixelated birefringent medium such as a liquid crystal video display. The combination of the electrically controlled polarizer unit and analyzer unit make it simple and fast to reconfigure the modulation described by the Jones matrix of the spatial light modulator. A particular optical processing objective is provided to the controller. The controller performs calculations and supplies control signals to the polarizer unit, the analyzer unit, and the spatial light modulator in order to obtain die optical processing objective.

Maximizing the Functional Status of Geriatric Patients in an Acute Community Hospital Setting.

ERIC Educational Resources Information Center

Meissner, Paul; And Others

1989-01-01

Compared patients (N=103) admitted to inpatient geriatric care unit focusing on restoration of functional status to control-unit patients (N=75). Found greater improvement in basic functional capabilities of study-unit than control-unit patients. Found mixed picture when length of stay and total charges of study- and control-unit patients were…

Structural investigations of human hairs by spectrally resolved ellipsometry

NASA Astrophysics Data System (ADS)

Schulz, Benjamin; Chan, D.; Ruebhausen, M.; Wessel, S.; Wepf, R.

2006-03-01

Human hair is a biological layered system composed of two major layers, the cortex and the cuticle. We show spectrally resolved ellipsometry measurements of the ellipsometric parameters ψ and δ of single human hairs. The spectra reflect the layered nature of hair and the optical anisotropy of the hair’s structure. In addition, measurements on strands of human hair show a high reproducibility of the ellipsometric parameters for different hair fiber bundles from the same person. Based on the measurements, we develop a model of the dielectric function of hair that explains the spectra. This model includes the dielectric properties of the cuticle and cortex as well as their associated layer thicknesses. In addition, surface roughness effects modelled by a roughness layer with an complex refractive index given by an effective medium approach can have a significant effect on the measurements. We derive values for the parameters of the cuticle surface roughness layer of the thickness dACu= 273-360 nm and the air inclusion fA= 0.6 -5.7%. [1] accepted for publication in J. Biomed Opt., 2005

Likelihood-based confidence intervals for estimating floods with given return periods

NASA Astrophysics Data System (ADS)

Martins, Eduardo Sávio P. R.; Clarke, Robin T.

1993-06-01

This paper discusses aspects of the calculation of likelihood-based confidence intervals for T-year floods, with particular reference to (1) the two-parameter gamma distribution; (2) the Gumbel distribution; (3) the two-parameter log-normal distribution, and other distributions related to the normal by Box-Cox transformations. Calculation of the confidence limits is straightforward using the Nelder-Mead algorithm with a constraint incorporated, although care is necessary to ensure convergence either of the Nelder-Mead algorithm, or of the Newton-Raphson calculation of maximum-likelihood estimates. Methods are illustrated using records from 18 gauging stations in the basin of the River Itajai-Acu, State of Santa Catarina, southern Brazil. A small and restricted simulation compared likelihood-based confidence limits with those given by use of the central limit theorem; for the same confidence probability, the confidence limits of the simulation were wider than those of the central limit theorem, which failed more frequently to contain the true quantile being estimated. The paper discusses possible applications of likelihood-based confidence intervals in other areas of hydrological analysis.

A detailed experimental study of a DNA computer with two endonucleases.

PubMed

Sakowski, Sebastian; Krasiński, Tadeusz; Sarnik, Joanna; Blasiak, Janusz; Waldmajer, Jacek; Poplawski, Tomasz

2017-07-14

Great advances in biotechnology have allowed the construction of a computer from DNA. One of the proposed solutions is a biomolecular finite automaton, a simple two-state DNA computer without memory, which was presented by Ehud Shapiro's group at the Weizmann Institute of Science. The main problem with this computer, in which biomolecules carry out logical operations, is its complexity - increasing the number of states of biomolecular automata. In this study, we constructed (in laboratory conditions) a six-state DNA computer that uses two endonucleases (e.g. AcuI and BbvI) and a ligase. We have presented a detailed experimental verification of its feasibility. We described the effect of the number of states, the length of input data, and the nondeterminism on the computing process. We also tested different automata (with three, four, and six states) running on various accepted input words of different lengths such as ab, aab, aaab, ababa, and of an unaccepted word ba. Moreover, this article presents the reaction optimization and the methods of eliminating certain biochemical problems occurring in the implementation of a biomolecular DNA automaton based on two endonucleases.

Linear control of a boiler-turbine unit: analysis and design.

PubMed

Tan, Wen; Fang, Fang; Tian, Liang; Fu, Caifen; Liu, Jizhen

2008-04-01

Linear control of a boiler-turbine unit is discussed in this paper. Based on the nonlinear model of the unit, this paper analyzes the nonlinearity of the unit, and selects the appropriate operating points so that the linear controller can achieve wide-range performance. Simulation and experimental results at the No. 4 Unit at the Dalate Power Plant show that the linear controller can achieve the desired performance under a specific range of load variations.

A Closed-Loop Proportional-Integral (PI) Control Software for Fully Mechanically Controlled Automated Electron Microscopic Tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

REN, GANG; LIU, JINXIN; LI, HONGCHANG

A closed-loop proportional-integral (PI) control software is provided for fully mechanically controlled automated electron microscopic tomography. The software is developed based on Gatan DigitalMicrograph, and is compatible with Zeiss LIBRA 120 transmission electron microscope. However, it can be expanded to other TEM instrument with modification. The software consists of a graphical user interface, a digital PI controller, an image analyzing unit, and other drive units (i.e.: image acquire unit and goniometer drive unit). During a tomography data collection process, the image analyzing unit analyzes both the accumulated shift and defocus value of the latest acquired image, and provides the resultsmore » to the digital PI controller. The digital PI control compares the results with the preset values and determines the optimum adjustments of the goniometer. The goniometer drive unit adjusts the spatial position of the specimen according to the instructions given by the digital PI controller for the next tilt angle and image acquisition. The goniometer drive unit achieves high precision positioning by using a backlash elimination method. The major benefits of the software are: 1) the goniometer drive unit keeps pre-aligned/optimized beam conditions unchanged and achieves position tracking solely through mechanical control; 2) the image analyzing unit relies on only historical data and therefore does not require additional images/exposures; 3) the PI controller enables the system to dynamically track the imaging target with extremely low system error.« less

Scheme for development of monitoring networks for springs in Bavaria, Germany

NASA Astrophysics Data System (ADS)

Bender, Steffen; Einsiedl, Florian; Wohnlich, Stefan

2001-03-01

The present groundwater monitoring network in Bavaria consists mostly of wells and only a small number of natural groundwater springs, all of which are analyzed for mainly the common physical and chemical constituents in groundwater. In order to develop a long-term groundwater management plan for all the groundwater resources of Bavaria, the Bavarian State Office for Water Management intends to establish a separate spring-monitoring network throughout the 11 groundwater provinces of the state. As a first step, significant physicochemical parameters that show considerable annual fluctuation (after monitoring 1-3 years) were determined at 21 springs or spring systems to create a basic data set to guide future monitoring. A selection procedure was developed around four parameters: (1) geological units, which includes the principal aquifers; (2) rate of spring discharge; (3) land utilization within a catchment; and (4) approximate size of the subterranean catchment. However, in the initial phase of the study, only the first three parameters were investigated. These parameters established a matrix for evaluating each groundwater region of Bavaria to aid in the selection of additional springs for the proposed monitoring network. Résumé. Le réseau actuel de surveillance des eaux souterraines en Bavière consiste surtout en des puits avec seulement un petit nombre de sources, tous analysés pour l'essentiel pour les composants courants physiques et chimiques des eaux souterraines. Afin de développer un plan de gestion à long terme des eaux souterraines de la Bavière, l'Office bavarois pour la gestion de l'eau cherche à mettre en place un réseau séparé de surveillance des sources dans les onze provinces hydrogéologiques du lander. Dans un premier temps, les paramètres physico-chimiques significatifs qui présentent des variations annuelles considérables, après 1 à 3 ans de surveillance, ont été déterminés à 21 sources ou groupes de sources pour constituer un jeu de données de base pour guider la future surveillance. Une procédure de sélection a été développée autour de quatre paramètres: (1) les unités géologiques, comprenant les principaux aquifères, (2) le débit des sources, (3) l'occupation du sol dans le bassin, et (4) la dimension approximative du bassin d'alimentation souterrain. Toutefois, dans la phase initiale de l'étude, seuls les trois premiers paramètres ont été étudiés. Ces paramètres constituent une matrice d'évaluation de chaque région hydrogéologique de Bavière pour aider à la sélection de sources supplémentaires destinées au réseau de surveillance proposé. Resumen. La red de muestreo actual de aguas subterráneas en Bavaria (Alemania) está formada sobre todo por pozos, mientras que apenas hay unos pocos manantiales naturales. Los análisis incluyen, principalmente, los parámetros físico-químicos habituales. Con el objeto de desarrollar un plan de gestión de las aguas subterráneas en Bavaria a largo plazo, el Consejo del Estado para la Gestión del Agua pretende establecer una red de muestreo de manantiales diferenciada en las once regiones en que se divide el estado desde el punto de vista de las aguas subterráneas. Como primer paso, se determinaron los parámetros físico-químicos significativos que mostraban una fluctuación anual considerable (tras un muestreo de 1 a 3 años), con la finalidad de crear una base de datos elemental que canalizara los muestreos futuros. Se desarrolló un procedimiento de selección con base en cuatro parámetros: (1) unidades geológicas y acuíferos principales; (2) caudal del manantial; (3) uso del suelo dentro de la cuenca; y (4) tamaño aproximado de la zona de captación subterránea. Sin embargo, sólo se investigaron los tres primeros parámetros durante la fase inicial del estudio. Con ellos, se estableció una matriz para evaluar cada zona acuífera dentro de Bavaria y ayudar en la inclusión de otros manantiales en la red de muestro propuesta.

28 CFR 541.41 - Institutional referral.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.41 Institutional referral. (a) The Warden shall submit a recommendation for referral of an inmate for placement in a control unit to... following factors in a recommendation for control unit placement. (1) Any incident during confinement in...

Personal customizing exercise with a wearable measurement and control unit.

PubMed

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-06-28

Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment.

Real-time performance assessment and adaptive control for a water chiller unit in an HVAC system

NASA Astrophysics Data System (ADS)

Bai, Jianbo; Li, Yang; Chen, Jianhao

2018-02-01

The paper proposes an adaptive control method for a water chiller unit in a HVAC system. Based on the minimum variance evaluation, the adaptive control method was used to realize better control of the water chiller unit. To verify the performance of the adaptive control method, the proposed method was compared with an a conventional PID controller, the simulation results showed that adaptive control method had superior control performance to that of the conventional PID controller.

78 FR 29055 - State Medicaid Fraud Control Units; Data Mining

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-17

...] State Medicaid Fraud Control Units; Data Mining AGENCY: Office of Inspector General (OIG), HHS. ACTION... Fraud Control Units (MFCU) from using Federal matching funds to identify fraud through screening and... Control Number (OCN) 0990-0162. Table 2 indicates the paperwork burden associated with the requirements of...

Effect of accuracy of wind power prediction on power system operator

NASA Technical Reports Server (NTRS)

Schlueter, R. A.; Sigari, G.; Costi, T.

1985-01-01

This research project proposed a modified unit commitment that schedules connection and disconnection of generating units in response to load. A modified generation control is also proposed that controls steam units under automatic generation control, fast responding diesels, gas turbines and hydro units under a feedforward control, and wind turbine array output under a closed loop array control. This modified generation control and unit commitment require prediction of trend wind power variation one hour ahead and the prediction of error in this trend wind power prediction one half hour ahead. An improved meter for predicting trend wind speed variation is developed. Methods for accurately simulating the wind array power from a limited number of wind speed prediction records was developed. Finally, two methods for predicting the error in the trend wind power prediction were developed. This research provides a foundation for testing and evaluating the modified unit commitment and generation control that was developed to maintain operating reliability at a greatly reduced overall production cost for utilities with wind generation capacity.

Adaptive control system having hedge unit and related apparatus and methods

NASA Technical Reports Server (NTRS)

Johnson, Eric Norman (Inventor); Calise, Anthony J. (Inventor)

2003-01-01

The invention includes an adaptive control system used to control a plant. The adaptive control system includes a hedge unit that receives at least one control signal and a plant state signal. The hedge unit generates a hedge signal based on the control signal, the plant state signal, and a hedge model including a first model having one or more characteristics to which the adaptive control system is not to adapt, and a second model not having the characteristic(s) to which the adaptive control system is not to adapt. The hedge signal is used in the adaptive control system to remove the effect of the characteristic from a signal supplied to an adaptation law unit of the adaptive control system so that the adaptive control system does not adapt to the characteristic in controlling the plant.

Hydraulic actuator mechanism to control aircraft spoiler movements through dual input commands

NASA Technical Reports Server (NTRS)

Irick, S. C. (Inventor)

1981-01-01

An aircraft flight spoiler control mechanism is described. The invention enables the conventional, primary spoiler control system to retain its operational characteristics while accommodating a secondary input controlled by a conventional computer system to supplement the settings made by the primary input. This is achieved by interposing springs between the primary input and the spoiler control unit. The springs are selected to have a stiffness intermediate to the greater force applied by the primary control linkage and the lesser resistance offered by the spoiler control unit. Thus, operation of the primary input causes the control unit to yield before the springs, yet, operation of the secondary input, acting directly on the control unit, causes the springs to yield and absorb adjustments before they are transmitted into the primary control system.

Model of Rescue Units Control in Event of Potential Emergency

NASA Astrophysics Data System (ADS)

Kalach, A. V.; Kravchenko, A. S.; Soloviev, A. S.; Nesterov, A. A.

2018-05-01

A problem of organization and efficiency improvement of the system controlling the rescue units of the Ministry of Civil Defense and Emergency Response of the Russian Federation considered using the example of potential hydrological emergency, a model of a system for controlling rescue units in the event of potential hydrological emergency. The problem solution is based on mathematical models of operational control of rescue units and assessment of a hydrological situation of area flooding.

Personal customizing exercise with a wearable measurement and control unit

PubMed Central

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-01-01

Background Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. Methods The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. Results We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. Conclusion The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment. PMID:15982425

Unit area control in California forests

Treesearch

William E. Hallin

1951-01-01

There is a definite distinction between the basic concept of unit area control and the specific techniques or treatments used for specific units. Unit area control as a term was first used in connection with a cutting trial in the sugar pine-fir type; consequently, many foresters think the term refers merely to the technique used in sugar pine management, This is not...

Development of a wearable measurement and control unit for personal customizing machine-supported exercise.

PubMed

Wang, Zhihui; Tamura, Naoki; Kiryu, Tohru

2005-01-01

Wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of personal customizing machine-supported exercise that have biosignal-based controls. In this paper, we propose a new wearable unit design equipped with measurement and control functions to support the personal customization process. The wearable unit can measure the heart rate and electromyogram signals during exercise and output workload control commands to the exercise machines. We then applied a prototype of the wearable unit to an Internet-based cycle ergometer system. The wearable unit was examined using twelve young people to check its feasibility. The results verified that the unit could successfully adapt to the control of the workload and was effective for continuously supporting gradual changes in physical activities.

HEMP (high-altitude electromagnetic pulse) test and analysis of selected recloser-control units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, T.K.; Sands, S.H.; Tesche, F.M.

A simulated HEMP test was performed on power line recloser-control units in the ARES facility during the month of October 1988. Two types of recloser-control units were tested: an electronic control unit presently in wide use in electric power distribution systems and a new microprocessor based unit presently being introduced to electric utilities. It was found that the ARES fields did not cause reproducible disruptive failure of the equipment. Minor upsets, which were considered to be non-disruptive to the recloser operation, were observed. The test results were compared to the results of an analysis from a previous study and itmore » is concluded that the probability of disruptive failure of field operating recloser-control units subjected to a nominal unclassified HEMP environment is small. 3 refs., 30 figs., 1 tab.« less

Control system for several rotating mirror camera synchronization operation

NASA Astrophysics Data System (ADS)

Liu, Ningwen; Wu, Yunfeng; Tan, Xianxiang; Lai, Guoji

1997-05-01

This paper introduces a single chip microcomputer control system for synchronization operation of several rotating mirror high-speed cameras. The system consists of four parts: the microcomputer control unit (including the synchronization part and precise measurement part and the time delay part), the shutter control unit, the motor driving unit and the high voltage pulse generator unit. The control system has been used to control the synchronization working process of the GSI cameras (driven by a motor) and FJZ-250 rotating mirror cameras (driven by a gas driven turbine). We have obtained the films of the same objective from different directions in different speed or in same speed.

NASA three-laser airborne differential absorption lidar system electronics

NASA Technical Reports Server (NTRS)

Allen, R. J.; Copeland, G. D.

1984-01-01

The system control and signal conditioning electronics of the NASA three laser airborne differential absorption lidar (DIAL) system are described. The multipurpose DIAL system was developed for the remote measurement of gas and aerosol profiles in the troposphere and lower stratosphere. A brief description and photographs of the majority of electronics units developed under this contract are presented. The precision control system; which includes a master control unit, three combined NASA laser control interface/quantel control units, and three noise pulse discriminator/pockels cell pulser units; is described in detail. The need and design considerations for precision timing and control are discussed. Calibration procedures are included.

Operating manual for the miniservo-control tester

USGS Publications Warehouse

Rapp, W.L.

1986-01-01

Ever since the implementation of servo-control units (regular and minimodels) with manometers at U. S. Geological Survey streamflow stations, the need for an effective and efficient servo-control unit tester has been paramount among field personnel. In numerous cases, servo-control unit failures were blamed on battery failures and vice versa. There was no valid instrument to definitively identify cause of failure, let alone properly diagnose the servo-control/manometer system. In 1983, two servo-control unit testers were developed and fabricated. One was mechanical in fabrication, operation, and serviceability; the other was electronic. The testers were extensively used and evaluated in Maine, Ohio, Kansas, and Louisiana under a wide range of environmental conditions. The consensus to integrate the best aspects of both testers into one instrument allowed the Survey to finally solve its long-time need for an effective, efficient servo-control unit tester. (USGS)

Multichannel optical sensing device

DOEpatents

Selkowitz, S.E.

1985-08-16

A multichannel optical sensing device is disclosed, for measuring the outdoor sky luminance or illuminance or the luminance or illuminance distribution in a room, comprising a plurality of light receptors, an optical shutter matrix including a plurality of liquid crystal optical shutter elements operable by electrical control signals between light transmitting and light stopping conditions, fiber optical elements connected between the receptors and the shutter elements, a microprocessor based programmable control unit for selectively supplying control signals to the optical shutter elements in a programmable sequence, a photodetector including an optical integrating spherical chamber having an input port for receiving the light from the shutter matrix and at least one detector element in the spherical chamber for producing output signals corresponding to the light, and output units for utilizing the output signals including a storage unit having a control connection to the microprocessor based programmable control unit for storing the output signals under the sequence control of the programmable control unit.

Multichannel optical sensing device

DOEpatents

Selkowitz, Stephen E.

1990-01-01

A multichannel optical sensing device is disclosed, for measuring the outr sky luminance or illuminance or the luminance or illuminance distribution in a room, comprising a plurality of light receptors, an optical shutter matrix including a plurality of liquid crystal optical shutter elements operable by electrical control signals between light transmitting and light stopping conditions, fiber optic elements connected between the receptors and the shutter elements, a microprocessor based programmable control unit for selectively supplying control signals to the optical shutter elements in a programmable sequence, a photodetector including an optical integrating spherical chamber having an input port for receiving the light from the shutter matrix and at least one detector element in the spherical chamber for producing output signals corresponding to the light, and output units for utilizing the output signals including a storage unit having a control connection to the microprocessor based programmable control unit for storing the output signals under the sequence control of the programmable control unit.

Neuronal codes for the inhibitory control of impulsive actions in the rat infralimbic cortex.

PubMed

Tsutsui-Kimura, Iku; Ohmura, Yu; Izumi, Takeshi; Matsushima, Toshiya; Amita, Hidetoshi; Yamaguchi, Taku; Yoshida, Takayuki; Yoshioka, Mitsuhiro

2016-01-01

Poor impulse control is a debilitating condition observed in various psychiatric disorders and could be a risk factor for drug addiction, criminal involvement, and suicide. The rat infralimbic cortex (IL), located in the ventral portion of the medial prefrontal cortex, has been implicated in impulse control. To elucidate the neurophysiological basis of impulse control, we recorded single unit activity in the IL of a rat performing a 3-choiceserial reaction time task (3-CSRTT) and 2-choice task (2-CT), which are animal models for impulsivity. The inactivation of IL neuronal activity with an injection of muscimol (0.1 μg /side) disrupted impulse control in the 3-CSRTT. More than 60% (38/56) of isolated IL units were linked to impulse control, while approximately 30% of all units were linked to attentional function in the 3-CSRTT. To avoid confounding motor-related units with the impulse control-related units, we further conducted the 2-CT in which the animals' motor activities were restricted during recording window. More than 30% (14/44) of recorded IL units were linked to impulse control in the 2-CT. Several types of impulse control-related units were identified. Only 16% of all units were compatible with the results of the muscimol experiment, which showed a transient decline in the firing rate immediately before the release of behavioral inhibition. This is the first study to elucidate the neurophysiological basis of impulse control in the IL and to propose that IL neurons control impulsive actions in a more complex manner than previously considered. Copyright © 2015 Elsevier B.V. All rights reserved.

46 CFR 161.002-10 - Automatic fire detecting system control unit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... inches) or other audible alarm that has an equivalent sound level and that is mounted at the control unit... section. (4) Non-interference. The control unit shall be so arranged as to permit one or any number of... the visible alarm to remain until the trouble has been corrected. (3) Non-interference. The control...

46 CFR 161.002-10 - Automatic fire detecting system control unit.

Code of Federal Regulations, 2014 CFR

2014-10-01

... inches) or other audible alarm that has an equivalent sound level and that is mounted at the control unit... section. (4) Non-interference. The control unit shall be so arranged as to permit one or any number of... the visible alarm to remain until the trouble has been corrected. (3) Non-interference. The control...

46 CFR 161.002-10 - Automatic fire detecting system control unit.

Code of Federal Regulations, 2013 CFR

2013-10-01

... inches) or other audible alarm that has an equivalent sound level and that is mounted at the control unit... section. (4) Non-interference. The control unit shall be so arranged as to permit one or any number of... the visible alarm to remain until the trouble has been corrected. (3) Non-interference. The control...

46 CFR 161.002-10 - Automatic fire detecting system control unit.

Code of Federal Regulations, 2011 CFR

2011-10-01

... inches) or other audible alarm that has an equivalent sound level and that is mounted at the control unit... section. (4) Non-interference. The control unit shall be so arranged as to permit one or any number of... the visible alarm to remain until the trouble has been corrected. (3) Non-interference. The control...

Flow-Control Unit For Nitrogen And Hydrogen Gases

NASA Technical Reports Server (NTRS)

Chang, B. J.; Novak, D. W.

1990-01-01

Gas-flow-control unit installed and removed as one piece replaces system that included nine separately serviced components. Unit controls and monitors flows of nitrogen and hydrogen gases. Designed for connection via fluid-interface manifold plate, reducing number of mechanical fluid-interface connections from 18 to 1. Unit provides increasing reliability, safety, and ease of maintenance, and for reducing weight, volume, and power consumption.

40 CFR 75.19 - Optional SO2, NOX, and CO2 emissions calculation for low mass emissions (LME) units.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (or group of identical units) equipped with SCR (or SNCR) and uses dry low-NOX technology to control... with add-on NOX emission controls, and for units that use dry low-NOX technology, the owner or operator... mass emissions unit that uses dry low-NOX premix technology to control NOX emissions, proper operation...

40 CFR 63.1281 - Control equipment requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements for sources except small glycol dehydration units. Owners and operators of small glycol dehydration units shall comply with the control requirements in paragraph (f) of this section. (1) The control... or operator shall determine glycol dehydration unit baseline operations (as defined in § 63.1271...

40 CFR 63.1281 - Control equipment requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements for sources except small glycol dehydration units. Owners and operators of small glycol dehydration units shall comply with the control requirements in paragraph (f) of this section. (1) The control... or operator shall determine glycol dehydration unit baseline operations (as defined in § 63.1271...

Preventing patient-to-worker violence in hospitals: outcome of a randomized controlled intervention

PubMed Central

Arnetz, Judith E.; Hamblin, Lydia; Russell, Jim; Upfal, Mark J.; Luborsky, Mark; Janisse, James; Essenmacher, Lynnette

2016-01-01

Objective To evaluate the effects of a randomized controlled intervention on the incidence of patient-to-worker (Type II) violence and related injury in hospitals. Methods Forty-one units across 7 hospitals were randomized into intervention (n=21) and control (n=20) groups. Intervention units received unit-level violence data to facilitate development of an action plan for violence prevention; no data were presented to control units. Main outcomes were rates of violent events and injuries across study groups over time. Results Six months post-intervention, incident rate ratios of violent events were significantly lower on intervention units compared to controls (IRR 0.48, 95% CI 0.29-0.80). At 24 months, the risk for violence-related injury was lower on intervention units, compared to controls (IRR 0.37, 95% CI 0.17-0.83). Conclusion This data-driven, worksite-based intervention was effective in decreasing risks of patient-to-worker violence and related injury. PMID:28045793

Drive Control System for Pipeline Crawl Robot Based on CAN Bus

NASA Astrophysics Data System (ADS)

Chen, H. J.; Gao, B. T.; Zhang, X. H.; Deng2, Z. Q.

2006-10-01

Drive control system plays important roles in pipeline robot. In order to inspect the flaw and corrosion of seabed crude oil pipeline, an original mobile pipeline robot with crawler drive unit, power and monitor unit, central control unit, and ultrasonic wave inspection device is developed. The CAN bus connects these different function units and presents a reliable information channel. Considering the limited space, a compact hardware system is designed based on an ARM processor with two CAN controllers. With made-to-order CAN protocol for the crawl robot, an intelligent drive control system is developed. The implementation of the crawl robot demonstrates that the presented drive control scheme can meet the motion control requirements of the underwater pipeline crawl robot.

Wireless power charging using point of load controlled high frequency power converters

DOEpatents

Miller, John M.; Campbell, Steven L.; Chambon, Paul H.; Seiber, Larry E.; White, Clifford P.

2015-10-13

An apparatus for wirelessly charging a battery of an electric vehicle is provided with a point of load control. The apparatus includes a base unit for generating a direct current (DC) voltage. The base unit is regulated by a power level controller. One or more point of load converters can be connected to the base unit by a conductor, with each point of load converter comprising a control signal generator that transmits a signal to the power level controller. The output power level of the DC voltage provided by the base unit is controlled by power level controller such that the power level is sufficient to power all active load converters when commanded to do so by any of the active controllers, without generating excessive power that may be otherwise wasted.

22 CFR 46.2 - Authority of departure-control officer to prevent alien's departure from the United States.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Authority of departure-control officer to prevent alien's departure from the United States. 46.2 Section 46.2 Foreign Relations DEPARTMENT OF STATE VISAS CONTROL OF ALIENS DEPARTING FROM THE UNITED STATES § 46.2 Authority of departure-control officer...

22 CFR 46.2 - Authority of departure-control officer to prevent alien's departure from the United States.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Authority of departure-control officer to prevent alien's departure from the United States. 46.2 Section 46.2 Foreign Relations DEPARTMENT OF STATE VISAS CONTROL OF ALIENS DEPARTING FROM THE UNITED STATES § 46.2 Authority of departure-control officer...

22 CFR 46.2 - Authority of departure-control officer to prevent alien's departure from the United States.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Authority of departure-control officer to prevent alien's departure from the United States. 46.2 Section 46.2 Foreign Relations DEPARTMENT OF STATE VISAS CONTROL OF ALIENS DEPARTING FROM THE UNITED STATES § 46.2 Authority of departure-control officer...

22 CFR 46.2 - Authority of departure-control officer to prevent alien's departure from the United States.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Authority of departure-control officer to prevent alien's departure from the United States. 46.2 Section 46.2 Foreign Relations DEPARTMENT OF STATE VISAS CONTROL OF ALIENS DEPARTING FROM THE UNITED STATES § 46.2 Authority of departure-control officer...

Advanced Electric Distribution, Switching, and Conversion Technology for Power Control

NASA Technical Reports Server (NTRS)

Soltis, James V.

1998-01-01

The Electrical Power Control Unit currently under development by Sundstrand Aerospace for use on the Fluids Combustion Facility of the International Space Station is the precursor of modular power distribution and conversion concepts for future spacecraft and aircraft applications. This unit combines modular current-limiting flexible remote power controllers and paralleled power converters into one package. Each unit includes three 1-kW, current-limiting power converter modules designed for a variable-ratio load sharing capability. The flexible remote power controllers can be used in parallel to match load requirements and can be programmed for an initial ON or OFF state on powerup. The unit contains an integral cold plate. The modularity and hybridization of the Electrical Power Control Unit sets the course for future spacecraft electrical power systems, both large and small. In such systems, the basic hybridized converter and flexible remote power controller building blocks could be configured to match power distribution and conversion capabilities to load requirements. In addition, the flexible remote power controllers could be configured in assemblies to feed multiple individual loads and could be used in parallel to meet the specific current requirements of each of those loads. Ultimately, the Electrical Power Control Unit design concept could evolve to a common switch module hybrid, or family of hybrids, for both converter and switchgear applications. By assembling hybrids of a common current rating and voltage class in parallel, researchers could readily adapt these units for multiple applications. The Electrical Power Control Unit concept has the potential to be scaled to larger and smaller ratings for both small and large spacecraft and for aircraft where high-power density, remote power controllers or power converters are required and a common replacement part is desired for multiples of a base current rating.

Photovoltaic Powering And Control System For Electrochromic Windows

DOEpatents

Schulz, Stephen C.; Michalski, Lech A.; Volltrauer, Hermann N.; Van Dine, John E.

2000-04-25

A sealed insulated glass unit is provided with an electrochromic device for modulating light passing through the unit. The electrochromic device is controlled from outside the unit by a remote control electrically unconnected to the device. Circuitry within the unit may be magnetically controlled from outside. The electrochromic device is powered by a photovoltaic cells. The photovoltaic cells may be positioned so that at least a part of the light incident on the cell passes through the electrochromic device, providing a form of feedback control. A variable resistance placed in parallel with the electrochromic element is used to control the response of the electrochromic element to changes in output of the photovoltaic cell.

Groundwater-flow modeling in the Yucatan karstic aquifer, Mexico

NASA Astrophysics Data System (ADS)

González-Herrera, Roger; Sánchez-y-Pinto, Ismael; Gamboa-Vargas, José

2002-09-01

The current conceptual model of the unconfined karstic aquifer in the Yucatan Peninsula, Mexico, is that a fresh-water lens floats above denser saline water that penetrates more than 40 km inland. The transmissivity of the aquifer is very high so the hydraulic gradient is very low, ranging from 7-10 mm/km through most of the northern part of the peninsula. The computer modeling program AQUIFER was used to investigate the regional groundwater flow in the aquifer. The karstified zone was modeled using the assumption that it acts hydraulically similar to a granular, porous medium. As part of the calibration, the following hypotheses were tested: (1) karstic features play an important role in the groundwater-flow system; (2) a ring or belt of sinkholes in the area is a manifestation of a zone of high transmissivity that facilitates the channeling of groundwater toward the Gulf of Mexico; and (3) the geologic features in the southern part of Yucatan influence the groundwater-flow system. The model shows that the Sierrita de Ticul fault, in the southwestern part of the study area, acts as a flow barrier and head values decline toward the northeast. The modeling also shows that the regional flow-system dynamics have not been altered despite the large number of pumping wells because the volume of water pumped is small compared with the volume of recharge, and the well-developed karst system of the region has a very high hydraulic conductivity. Résumé. Le modèle conceptuel classique de l'aquifère karstique libre de la péninsule du Yucatan (Mexique) consiste en une lentille d'eau douce flottant sur une eau salée plus dense qui pénètre à plus de 40 km à l'intérieur des terres. La transmissivité de l'aquifère est très élevée, en sorte que le gradient hydraulique est très faible, compris entre 7 et 10 mm/km dans la plus grande partie du nord de la péninsule. Le modèle AQUIFER a été utilisé pour explorer les écoulements souterrains régionaux dans cet aquifère. La zone karstifiée a été modélisée en posant l'hypothèse qu'il fonctionne hydrauliquement comme un milieu poreux granulaire. Au cours de la calibration, les hypothèses suivantes ont été testées: (1) les phénomènes karstiques jouent un rôle important dans le système aquifère, (2) un anneau ou une ceinture de dépressions dans la région est la manifestation d'une zone à forte transmissivité qui permet l'écoulement en conduits de l'eau souterraine en direction du Golfe du Mexique, et (3) la situation géologique dans la partie sud du Yucatan détermine les écoulements souterrains. Le modèle montre que la faille de la Sierrita de Ticul, dans la partie sud-ouest de la région étudiée, joue le rôle de barrière et que les valeurs de la piézométrie décroissent en direction du nord-est. La modélisation montre également que la dynamique du système aquifère à l'échelle régionale n'a pas été modifiée malgré le grand nombre de puits de pompage, parce que le volume pompé est faible en comparaison du volume de recharge; en outre, le réseau karstique très bien développé dans cette région possède une très forte conductivité hydraulique. Resumen. El modelo conceptual actual del acuífero cárstico no confinado de la Península de Yucatán (México) es el de un lentejón de agua dulce flotando sobre agua salada, más densa, la cual penetra más de 40 kilómetros tierra adentro. Debido a la alta conductividad hidráulica del acuífero, existe un gradiente hidráulico muy bajo cuyo rango está entre 7 y 10 milímetros por kilómetro en la porción norte de la península. Se utilizó el código AQUIFER para investigar el sistema de flujo de las aguas subterráneas a escala regional en el acuífero. La zona carstificada se modeló suponiendo que actúa hidráulicamente como un medio poroso granular. Como parte de la calibración, se probaron las siguientes hipótesis: (1) las características cársticas desempeñan un papel importante en el sistema de flujo de agua subterránea (2) un anillo o cinturón de sumideros en el área es una manifestación de una zona de alta transmisividad que conduce las aguas subterráneas hacia el Golfo de México y (3) las propiedades geológicas de la porción sur de Yucatán influyen en el sistema de flujo de agua subterránea. El modelo demostró que la falla de la Sierrita de Ticul, situada en el sudoeste de la zona de estudio, actúa como una barrera al flujo, y que los niveles piezométricos disminuyen hacia el nordeste. La modelación también mostró que la dinámica del sistema de flujo regional no ha sido alterada a pesar de la gran cantidad de captaciones, ya que el volumen extraído es pequeño en comparación con la recarga al acuífero además, el sistema cárstico de la región, bien desarrollado, posee una conductividad hidráulica muy elevada.

Experience with ethylene plant computer control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nasi, M.; Darby, M.L.; Sourander, M.

This article discusses the control strategies, results and opinions of management and operations of a computer based ethylene plant control system. The ethylene unit contains 9 cracking heaters, and its nameplate capacity is 200,000 tpa ethylene. Reports on control performance during different unit loading and using different feedstock types. By converting the yield and utility consumption benefits due to computer control into monetary units, the payback time of the system is less than 2 yrs.

An investigation of collisions between fiber positioning units in LAMOST

NASA Astrophysics Data System (ADS)

Liu, Xiao-Jie; Wang, Gang

2016-04-01

The arrangement of fiber positioning units in the LAMOST focal plane may lead to collisions during the fiber allocation process. To avoid these collisions, a software-based protection system has to abandon some targets located in the overlapping field of adjacent fiber units. In this paper, we first analyze the probability of collisions between fibers and infer their possible reasons. It is useful to solve the problem of collisions among fiber positioning units so as to improve the efficiency of LAMOST. Based on this, a collision handling system is designed by using a master-slave control structure between the micro control unit and microcomputer. Simulated experiments validate that the system can provide real-time inspection and swap information between the fiber unit controllers and the main controller.

Near-memory data reorganization engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gokhale, Maya; Lloyd, G. Scott

A memory subsystem package is provided that has processing logic for data reorganization within the memory subsystem package. The processing logic is adapted to reorganize data stored within the memory subsystem package. In some embodiments, the memory subsystem package includes memory units, a memory interconnect, and a data reorganization engine ("DRE"). The data reorganization engine includes a stream interconnect and DRE units including a control processor and a load-store unit. The control processor is adapted to execute instructions to control a data reorganization. The load-store unit is adapted to process data move commands received from the control processor via themore » stream interconnect for loading data from a load memory address of a memory unit and storing data to a store memory address of a memory unit.« less

Unit Testing for Command and Control Systems

NASA Technical Reports Server (NTRS)

Alexander, Joshua

2018-01-01

Unit tests were created to evaluate the functionality of a Data Generation and Publication tool for a command and control system. These unit tests are developed to constantly evaluate the tool and ensure it functions properly as the command and control system grows in size and scope. Unit tests are a crucial part of testing any software project and are especially instrumental in the development of a command and control system. They save resources, time and costs associated with testing, and catch issues before they become increasingly difficult and costly. The unit tests produced for the Data Generation and Publication tool to be used in a command and control system assure the users and stakeholders of its functionality and offer assurances which are vital in the launching of spacecraft safely.

Dynamically limiting energy consumed by cooling apparatus

DOEpatents

Chainer, Timothy J.; David, Milnes P.; Iyengar, Madhusudan K.; Parida, Pritish R.; Schmidt, Roger R.; Schultz, Mark D.

2015-05-26

Cooling apparatuses and methods are provided which include one or more coolant-cooled structures associated with an electronics rack, a coolant loop coupled in fluid communication with one or more passages of the coolant-cooled structure(s), one or more heat exchange units coupled to facilitate heat transfer from coolant within the coolant loop, and N controllable components associated with the coolant loop or the heat exchange unit(s), wherein N.gtoreq.1. The N controllable components facilitate circulation of coolant through the coolant loop or transfer of heat from the coolant via the heat exchange unit(s). A controller is coupled to the N controllable components, and dynamically adjusts operation of the N controllable components, based on Z input parameters and one or more specified constraints, to provide a specified cooling to the coolant-cooled structure(s), while limiting energy consumed by the N controllable components, wherein Z.gtoreq.1.

Improved control system power unit for large parachutes

NASA Technical Reports Server (NTRS)

Chandler, J. A.; Grubbs, T. M.

1968-01-01

Improved control system power unit drives the control surfaces of very large controllable parachutes. The design features subassemblies for determining control surface position and cable loading, and protection of the load sensor against the possibility of damage during manipulation.

A Network Thermodynamic Framework for the Analysis and Control Design of Large-Scale Dynamical Systems

DTIC Science & Technology

2006-03-31

Nonnegative Dynamical Sys- tems................................................. 18 2.10. Adaptive Control for General Anesthesia and Intensive Care...Unit Sedation 20 2.11. Neural Network Adaptive Control for Intensive Care Unit Sedation and In- traoperative Anesthesia ...control for operating room hypnosis and intefisive care unit sedation. 1.3. Goals of this Report The main goal of this report is to summarize the

Strap-Down Inertial Systems

DTIC Science & Technology

1978-05-01

navigation computer (SNC), sepa- rate alterable memory units for the computer, a control /display unit (CDU), a computer control unit (CCU), and a non ...AND SYSTEM Advisory Group for Aerospace Research and Development, Paris (France). Presented at the 15th Meeting of the Guidance and Control Panel of... Group , Redondo Beach, Calif.) American Institute of Aeronautics and Astronautics, Guidance and Control Conference, Key Biscayne, Fla., August 20-22

78 FR 721 - California State Nonroad Engine Pollution Control Standards; Transport Refrigeration Units...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

...; Transport Refrigeration Units; Request for Authorization; Opportunity for Public Hearing and Comment AGENCY... Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs...''), regarding its ``Airborne Toxic Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU...

Spool-type control valve assembly with reduced spool stroke for hydraulic belt-and-pulley type continuously variable transmission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Itoh, H.; Akashi, T.; Takada, M.

1987-03-31

This patent describes a hydraulic control system for controlling a speed ratio of a hydraulically-operated continuously variable transmission of belt-and-pulley type having a variable-diameter pulley and a hydraulic cylinder for changing an effective diameter of the variable diameter-pulley of the transmission. The hydraulic control system includes a speed-ratio control valve assembly for controlling the supply and discharge of a pressurized fluid to and from the hydraulic cylinder to thereby change the speed ratio of the transmission. The speed-ratio control valve assembly comprises: a shift-direction switching valve unit disposed in fluid supply and discharge conduits communicating with the hydraulic cylinder, formore » controlling a direction in which the speed ratio of the transmission is varied; a shift-speed control valve unit of spool-valve type connected to the shift-direction switching valve unit. The shift-speed control valve unit is selectively placed in a first state in which the fluid supply and discharge flows to and from the hydraulic cylinder through the conduits are permitted, or in a second state in which the fluid supply flow is restricted while the fluid discharge flow is inhibited; an actuator means for placing the shift speed control valve unit alternately in the first and second states to control a rate of variation in the speed ratio of the transmission in the direction established by the shift-direction switching valve unit.« less

N4H9Cu7S4: a hydrazinium-based salt with a layered Cu7S4- framework.

PubMed

Mitzi, David B

2007-02-05

Crystals of a hydrazinium-based copper(I) sulfide salt, N4H9Cu7S4 (1), have been isolated by an ambient temperature solution-based process. In contrast to previously reported hydrazinium salts of main-group metal chalcogenides, which consist of isolated metal chalcogenide anions, and ACu7S4 (A = NH4+, Rb+, Tl+, K+), which contains a more three-dimensional Cu7S4- framework with partial Cu-site occupancy, the structure of 1 [P21, a = 6.8621(4) A, b = 7.9851(4) A, c = 10.0983(5) A, beta = 99.360(1) degrees , Z = 2] is composed of extended two-dimensional Cu7S4- slabs with full Cu-site occupancy. The Cu7S4- slabs are separated by a mixture of hydrazinium and hydrazine moieties. Thermal decomposition of 1 into copper(I) sulfide proceeds at a significantly lower temperature than that observed for analogous hydrazinium salts of previously considered metal chalcogenides, completing the transition at temperatures as low as 120 degrees C. Solutions of 1 may be used in the solution deposition of a range of Cu-containing chalcogenide films.

[Intracardiac echocardiography during percutaneous closure of atrial septal defect and patent foramen ovale].

PubMed

Brochet, E; Habib, G

2005-06-01

Intracardiac echocardiography is a new technique based on the use of ultrasonic diagnostic catheters. The most significant current experience has been obtained with the AcuNav catheter, with a "phased array" high frequency (5.5 to 10 mHz) detector, which obtains bidimensional echocardiographic views, coupled to pulsed and colour Doppler. Image acquisition is made from an intracardiac position, usually the right atrium. This review touches on the technical aspects of this method, applied to the examination of the intra-atrial septum, as well as the results currently obtained during inter-atrial communication and patent foramen ovale closure procedures. In effect it is in this field of application that intracardiac ultrasound has now found its niche, providing equivalent information to the reference technique of transoesophageal echocardiography. Intracardiac echocardiography allows complete examination of the inter-atrial septum and septal defects, as well as accurate surveillance of the positioning of percutaneous closure devices. An important advantage of intracardiac echocardiography is the possibility of avoiding a general anaesthetic, usually necessary with the transoesophageal route. At present, the main limiting factor to its systematic use is its high cost, linked to the single use catheters.

A liquid-delivery device that provides precise reward control for neurophysiological and behavioral experiments.

PubMed

Mitz, Andrew R

2005-10-15

Behavioral neurophysiology and other kinds of behavioral research often involve the delivery of liquid rewards to experimental subjects performing some kind of operant task. Available systems use gravity or pumps to deliver these fluids, but such methods are poorly suited to moment-to-moment control of the volume, timing, and type of fluid delivered. The design described here overcomes these limitations using an electronic control unit, a pressurized reservoir unit, and an electronically controlled solenoid. The control unit monitors reservoir pressure and provides precisely timed solenoid activation signals. It also stores calibration tables and does on-the-fly interpolation to support computer-controlled delivery calibrated directly in milliliters. The reservoir provides pressurized liquid to a solenoid mounted near the subject. Multiple solenoids, each supplied by a separate reservoir unit and control unit, can be stacked in close proximity to allow instantaneous selection of which liquid reward is delivered. The precision of droplet delivery was verified by weighing discharged droplets on a commercial analytical balance.

Direct simulation of groundwater transit-time distributions using the reservoir theory

NASA Astrophysics Data System (ADS)

Etcheverry, David; Perrochet, Pierre

Groundwater transit times are of interest for the management of water resources, assessment of pollution from non-point sources, and quantitative dating of groundwaters by the use of environmental isotopes. The age of water is the time water has spent in an aquifer since it has entered the system, whereas the transit time is the age of water as it exits the system. Water at the outlet of an aquifer is a mixture of water elements with different transit times, as a consequence of the different flow-line lengths. In this paper, transit-time distributions are calculated by coupling two existing methods, the reservoir theory and a recent age-simulation method. Based on the derivation of the cumulative age distribution over the whole domain, the approach accounts for the whole hydrogeological framework. The method is tested using an analytical example and its applicability illustrated for a regional layered aquifer. Results show the asymmetry and multimodality of the transit-time distribution even in advection-only conditions, due to the aquifer geometry and to the velocity-field heterogeneity. Résumé Les temps de transit des eaux souterraines sont intéressants à connaître pour gérer l'évaluation des ressources en eau dans le cas de pollution à partir de sources non ponctuelles, et aussi pour dater quantitativement les eaux souterraines au moyen des isotopes du milieu. L'âge de l'eau est le temps qu'elle a passé dans un aquifère depuis qu'elle est entrée dans le système, alors que le temps de transit est l'âge de l'eau au moment où elle quitte le système. L'eau à la sortie d'un aquifère est un mélange d'eaux possédant différents temps de transit, du fait des longueurs différentes des lignes de courant suivies. Dans ce papier, les distributions des temps de transit sont calculées en couplant deux méthodes, la théorie du réservoir et une méthode récente de simulation des âges. Basée sur la dérivation de la distribution cumulées des âges sur tout le domaine, l'approche prend en compte le cadre hydrogéologique dans son ensemble. La méthode est testée sur un exemple analytique et son applicabilité est illustrée pour un aquifère stratifié régional. Les résultats montrent l'asymétrie et la plurimodalité de la distribution des temps de transit même dans des conditions uniquement d'advection, à cause de la géométrie de l'aquifère et de l'hétérogénéité du champ des vitesses. Resumen El estudio de los tiempos de tránsito del agua subterránea es muy útil para (1) la gestión de los recursos de agua frente a la contaminación por focos no puntuales, y (2) la datación de aguas mediante isótopos ambientales. La edad de un agua subterránea es el tiempo que ésta ha permanecido en el acuífero contada desde el momento de su entrada, mientras que el tiempo de tránsito corresponde a la edad del agua en el momento en que abandona el sistema. En el punto de descarga en realidad se encuentra una mezcla de aguas con distintos tiempos de tránsito, debido a la yuxtaposición de líneas de flujo con diferentes recorridos. En este artículo se calculan las distribuciones de tiempos de tránsito mediante el acoplamiento de dos métodos ya existentes: la teoría de embalse y un método reciente de simulación de edades. El método se basa en la derivación de la distribución acumulada de edades, y es aplicable en todo el dominio hidrogeológico. El método se ha probado en un ejemplo analítico, y su aplicabilidad se muestra para un acuífero estratificado. Como resultado se obtiene que, aun en el caso de flujo exclusivamente advectivo, la distribución de tiempos de tránsito es asimétrica y multimodal debido a la geometría del acuífero y a la heterogeneidad del campo de velocidades.

Inverse problem in hydrogeology

NASA Astrophysics Data System (ADS)

Carrera, Jesús; Alcolea, Andrés; Medina, Agustín; Hidalgo, Juan; Slooten, Luit J.

2005-03-01

The state of the groundwater inverse problem is synthesized. Emphasis is placed on aquifer characterization, where modelers have to deal with conceptual model uncertainty (notably spatial and temporal variability), scale dependence, many types of unknown parameters (transmissivity, recharge, boundary conditions, etc.), nonlinearity, and often low sensitivity of state variables (typically heads and concentrations) to aquifer properties. Because of these difficulties, calibration cannot be separated from the modeling process, as it is sometimes done in other fields. Instead, it should be viewed as one step in the process of understanding aquifer behavior. In fact, it is shown that actual parameter estimation methods do not differ from each other in the essence, though they may differ in the computational details. It is argued that there is ample room for improvement in groundwater inversion: development of user-friendly codes, accommodation of variability through geostatistics, incorporation of geological information and different types of data (temperature, occurrence and concentration of isotopes, age, etc.), proper accounting of uncertainty, etc. Despite this, even with existing codes, automatic calibration facilitates enormously the task of modeling. Therefore, it is contended that its use should become standard practice. L'état du problème inverse des eaux souterraines est synthétisé. L'accent est placé sur la caractérisation de l'aquifère, où les modélisateurs doivent jouer avec l'incertitude des modèles conceptuels (notamment la variabilité spatiale et temporelle), les facteurs d'échelle, plusieurs inconnues sur différents paramètres (transmissivité, recharge, conditions aux limites, etc.), la non linéarité, et souvent la sensibilité de plusieurs variables d'état (charges hydrauliques, concentrations) des propriétés de l'aquifère. A cause de ces difficultés, le calibrage ne peut êtreséparé du processus de modélisation, comme c'est le cas dans d'autres cas de figure. Par ailleurs, il peut être vu comme une des étapes dans le processus de détermination du comportement de l'aquifère. Il est montré que les méthodes d'évaluation des paramètres actuels ne diffèrent pas si ce n'est dans les détails des calculs informatiques. Il est montré qu'il existe une large panoplie de techniques d'inversion : codes de calcul utilisables par tout-un-chacun, accommodation de la variabilité via la géostatistique, incorporation d'informations géologiques et de différents types de données (température, occurrence, concentration en isotopes, âge, etc.), détermination de l'incertitude. Vu ces développements, la calibration automatique facilite énormément la modélisation. Par ailleurs, il est souhaitable que son utilisation devienne une pratique standardisée. Se sintetiza el estado del problema inverso en aguas subterráneas. El énfasis se ubica en la caracterización de acuíferos, donde los modeladores tienen que enfrentar la incertidumbre del modelo conceptual (principalmente variabilidad temporal y espacial), dependencia de escala, muchos tipos de parámetros desconocidos (transmisividad, recarga, condiciones limitantes, etc), no linealidad, y frecuentemente baja sensibilidad de variables de estado (típicamente presiones y concentraciones) a las propiedades del acuífero. Debido a estas dificultades, no puede separarse la calibración de los procesos de modelado, como frecuentemente se hace en otros campos. En su lugar, debe de visualizarse como un paso en el proceso de enten dimiento del comportamiento del acuífero. En realidad, se muestra que los métodos reales de estimación de parámetros no difieren uno del otro en lo esencial, aunque sí pueden diferir en los detalles computacionales. Se discute que existe amplio espacio para la mejora del problema inverso en aguas subterráneas: desarrollo de códigos amigables alusuario, acomodamiento de variabilidad a través de geoestadística, incorporación de información geológica y diferentes tipos de datos (temperatura, presencia y concentración de isótopos, edad, etc), explicación apropiada de incertidumbre, etc. A pesar de esto, aún con los códigos existentes, la calibración automática facilita enormemente la tarea de modelado. Por lo tanto, se sostiene que su uso debería de convertirse en práctica standard.

78 FR 38970 - California State Nonroad Engine Pollution Control Standards; Within-the-Scope Determination for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and... Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and...-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs Operate Be...

46 CFR 161.002-8 - Automatic fire detecting systems, general requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... detecting system shall consist of a power supply; a control unit on which are located visible and audible... control unit. Power failure alarm devices may be separately housed from the control unit and may be combined with other power failure alarm systems when specifically approved. (b) [Reserved] [21 FR 9032, Nov...

46 CFR 161.002-8 - Automatic fire detecting systems, general requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... detecting system shall consist of a power supply; a control unit on which are located visible and audible... control unit. Power failure alarm devices may be separately housed from the control unit and may be combined with other power failure alarm systems when specifically approved. (b) [Reserved] [21 FR 9032, Nov...

Quality Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

Instrumentation Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 22 units to consider for use in a tech prep competency profile for the occupation of instrumentation control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…

Design and Evaluation of a Fully Implantable Control Unit for Blood Pumps

PubMed Central

Unthan, Kristin; Gräf, Felix; Laumen, Marco; Finocchiaro, Thomas; Sommer, Christoph; Lanmüller, Hermann; Steinseifer, Ulrich

2015-01-01

As the number of donor hearts is limited while more and more patients suffer from end stage biventricular heart failure, Total Artificial Hearts become a promising alternative to conventional treatment. While pneumatic devices sufficiently supply the patients with blood flow, the patient's quality of life is limited by the percutaneous pressure lines and the size of the external control unit. This paper describes the development of the control unit of the ReinHeart, a fully implantable Total Artificial Heart. General requirements for any implantable control unit are defined from a technical and medical point of view: necessity of a Transcutaneous Energy Transmission, autonomous operation, safety, geometry, and efficiency. Based on the requirements, a prototype is designed; it incorporates a LiFePo4 battery pack with charger, a rectifier for transcutaneous energy transmission, the motor's driver electronics, and a microcontroller which monitors and controls all functions. In validation tests, the control unit demonstrated a stable operation on TET and battery supply and a safe switching from one supply to the other. The overall mean efficiency is 14% on TET and 22% on battery supply. The control unit is suitable for chronic animal trials of the ReinHeart. PMID:26583095

Experience in connecting the power generating units of thermal power plants to automatic secondary frequency regulation within the united power system of Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhukov, A. V.; Komarov, A. N.; Safronov, A. N.

The principles of central control of the power generating units of thermal power plants by automatic secondary frequency and active power overcurrent regulation systems, and the algorithms for interactions between automatic power control systems for the power production units in thermal power plants and centralized systems for automatic frequency and power regulation, are discussed. The order of switching the power generating units of thermal power plants over to control by a centralized system for automatic frequency and power regulation and by the Central Coordinating System for automatic frequency and power regulation is presented. The results of full-scale system tests ofmore » the control of power generating units of the Kirishskaya, Stavropol, and Perm GRES (State Regional Electric Power Plants) by the Central Coordinating System for automatic frequency and power regulation at the United Power System of Russia on September 23-25, 2008, are reported.« less

Decisive Action Training Environment at the Joint Readiness Training Center, Vol.14: Company-Level Combined Arms Maneuver

DTIC Science & Technology

2016-12-01

isolate the breach. “At the company level, direct fire control measures are effective only if the entire unit has a common understanding of what they mean... units must have the same control measures , and these measures must be shared with 66 CENTER FOR ARMY LESSONS LEARNED adjacent units for them to be...Graphic control measures • Adjacent unit coordination • CCIRs • Command and signal • Rules of engagement (ROE) Mission Orders in Practice During

A miniaturized digital telemetry system for physiological data transmission

NASA Technical Reports Server (NTRS)

Portnoy, W. M.; Stotts, L. J.

1978-01-01

A physiological date telemetry system, consisting basically of a portable unit and a ground base station was designed, built, and tested. The portable unit to be worn by the subject is composed of a single crystal controlled transmitter with AM transmission of digital data and narrowband FM transmission of voice; a crystal controlled FM receiver; thirteen input channels follwed by a PCM encoder (three of these channels are designed for ECG data); a calibration unit; and a transponder control system. The ground base station consists of a standard telemetry reciever, a decoder, and an FM transmitter for transmission of voice and transponder signals to the portable unit. The ground base station has complete control of power to all subsystems in the portable unit. The phase-locked loop circuit which is used to decode the data, remains in operation even when the signal from the portable unit is interrupted.

Dynamically limiting energy consumed by cooling apparatus

DOEpatents

Chainer, Timothy J.; David, Milnes P.; Iyengar, Madhusudan K.; Parida, Pritish R.; Schmidt, Roger R.; Schultz, Mark D.

2015-06-09

Cooling methods are provided which include providing: one or more coolant-cooled structures associated with an electronics rack, a coolant loop coupled in fluid communication with one or more passages of the coolant-cooled structure(s), one or more heat exchange units coupled to facilitate heat transfer from coolant within the coolant loop, and N controllable components associated with the coolant loop or the heat exchange unit(s), wherein N.gtoreq.1. The N controllable components facilitate circulation of coolant through the coolant loop or transfer of heat from the coolant via the heat exchange unit(s). A controller is also provided to dynamically adjust operation of the N controllable components, based on Z input parameters and one or more specified constraints, and provide a specified cooling to the coolant-cooled structure(s), while limiting energy consumed by the N controllable components, wherein Z.gtoreq.1.

Effects of Hydrogen Peroxide on Dental Unit Biofilms and Treatment Water Contamination

PubMed Central

Lin, Shih-Ming; Svoboda, Kathy K.H.; Giletto, Anthony; Seibert, Jeff; Puttaiah, Raghunath

2011-01-01

Objectives: To study effects of various concentrations of hydrogen peroxide on mature waterline biofilms and in controlling planktonic (free-floating) organisms in simulated dental treatment water systems; and to study in vitro the effects of 2%, 3%, and 7% hydrogen peroxide on the removal of mature biofilms and inorganic compounds in dental waterlines. Methods: Four units of an automated dental unit water system simulation device was used for 12 weeks. All units were initially cleaned to control biofilms and inorganic deposits. H2O2 at concentrations of 1%, 2%, 3% was used weekly for periodic cleaning in three treatment group units (units 1, 2 & 3), with 0.05%, 0.15% and 0.25% H2O2 in municipal water used as irrigant respectively. The control unit (unit 4) did not have weekly cleanings and used municipal water as irrigant. Laser Scanning Confocal Microscopy and Scanning Electron Microscopy were used to study deposits on lines, and weekly heterotrophic plate counts done to study effluent water contamination. A 24 hour in vitro challenge test with 7%, 3% and 2% H2O2 on mature biofilms was conducted using harvested waterlines to study biofilm and inorganic deposit removal. Results: Heterotrophic plate counts of effluent water showed that the control unit reached contamination levels in excess of 400,000 CFU/mL while all treatment units showed contamination levels <500 CFU/mL through most of the 12 weeks. All treatment units showed varying levels of biofilm and inorganic deposit control in this short 12 week study. The in vitro challenge test showed although there was biofilm control, there was no eradication even when 7% H2O2 was used for 24 hours. Conclusions: 2% H2O2 used as a periodic cleaner, and diluted to 0.05% in municipal water for irrigation was beneficial in controlling biofilm and planktonic contamination in dental unit water systems. However, to remove well established biofilms, it may take more than 2 months when initial and multiple periodic cleanings are performed using H2O2. PMID:21228956

Wireless, relative-motion computer input device

DOEpatents

Holzrichter, John F.; Rosenbury, Erwin T.

2004-05-18

The present invention provides a system for controlling a computer display in a workspace using an input unit/output unit. A train of EM waves are sent out to flood the workspace. EM waves are reflected from the input unit/output unit. A relative distance moved information signal is created using the EM waves that are reflected from the input unit/output unit. Algorithms are used to convert the relative distance moved information signal to a display signal. The computer display is controlled in response to the display signal.

40 CFR 1042.125 - Maintenance instructions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission... converters, electronic control units, particulate traps, trap oxidizers, components related to particulate..., electronic control units, particulate traps, trap oxidizers, components related to particulate traps and trap...

40 CFR 1042.125 - Maintenance instructions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission... converters, electronic control units, particulate traps, trap oxidizers, components related to particulate..., electronic control units, particulate traps, trap oxidizers, components related to particulate traps and trap...

40 CFR 1042.125 - Maintenance instructions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission... converters, electronic control units, particulate traps, trap oxidizers, components related to particulate..., electronic control units, particulate traps, trap oxidizers, components related to particulate traps and trap...

40 CFR 1042.125 - Maintenance instructions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission... converters, electronic control units, particulate traps, trap oxidizers, components related to particulate..., electronic control units, particulate traps, trap oxidizers, components related to particulate traps and trap...

Design description of a microprocessor based Engine Monitoring and Control unit (EMAC) for small turboshaft

NASA Technical Reports Server (NTRS)

Baez, A. N.

1985-01-01

Research programs have demonstrated that digital electronic controls are more suitable for advanced aircraft/rotorcraft turbine engine systems than hydromechanical controls. Commercially available microprocessors are believed to have the speed and computational capability required for implementing advanced digital control algorithms. Thus, it is desirable to demonstrate that off-the-shelf microprocessors are indeed capable of performing real time control of advanced gas turbine engines. The engine monitoring and control (EMAC) unit was designed and fabricated specifically to meet the requirements of an advanced gas turbine engine control system. The EMAC unit is fully operational in the Army/NASA small turboshaft engine digital research program.

26 CFR 1.957-2 - Controlled foreign corporation deriving income from insurance of United States risks.

Code of Federal Regulations, 2010 CFR

2010-04-01

... from insurance of United States risks. 1.957-2 Section 1.957-2 Internal Revenue INTERNAL REVENUE... Corporations § 1.957-2 Controlled foreign corporation deriving income from insurance of United States risks. (a... States risks under § 1.953-1, the term “controlled foreign corporation” means any foreign corporation of...

Engine Tune-up Service. Unit 6: Emission Control Systems. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Bacon, E. Miles

This student guide is for Unit 6, Emission Control Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting, testing, and servicing an emission control system. A companion review exercise book and posttests are available separately as CE 031 221-222. An introduction tells how this unit fits…

Unit undergoes controls upgrade to meet cycling needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weston, B.; Tinkham, R.; Chloupek, J.

1994-04-01

New England Electric System's Brayton Point Unit 3, Somerset, Mass, along with many other units in the US, has been forced into cycling operation on a much more frequent basis than was intended when the original controls were installed. Low-load operation and lengthy startup times also had to be addressed. An integrated control and monitoring system installed at Unit 3 to handle the boiler/turbine controls, burner management, and equipment monitoring functions. New strategies, particularly with the startup valves, were implemented to provide faster, safer, and more economical startups. The retrofit has been a success, with marked improvement in both startupmore » and operation.« less

The control unit of the near infrared spectrograph of the Euclid space mission: detailed design

NASA Astrophysics Data System (ADS)

Toledo-Moreo, Rafael; Colodro-Conde, Carlos; Gómez-Sáenz-de-Tejada, Jaime; Pérez-Lizán, David; Díaz-García, José Javier; Tubío-Araujo, Óscar; Raichs, Cayetano; Catalán, Jordi; Rebolo-López, Rafael

2016-07-01

The Near Infrared Spectrograph and Photometer (NISP) is one of the instruments on board the ESA EUCLID mission. The Universidad Politécnica de Cartagena and Instituto de Astrofísica de Canarias are responsible of the Instrument Control Unit of the NISP (NI-ICU) in the Euclid Consortium. The NI-ICU hardware is developed by CRISA (Airbus Defence and Space), and its main functions are: communication with the S/C and the Data Processing Unit, control of the Filter and Grism Wheels, control of the Calibration Unit and thermal control of the instrument. This paper presents the NI-ICU status of definition and design at the end of the detailed design phase.

75 FR 52948 - Agency Information Collection Request; 60-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

.... Proposed Project: State Medicaid Fraud Control Units' Reports--OMB No. 0990-0162-Extension--Office of the... requirements in Title 19 of the Social Security Act at 1903 (q) and 42 CFR1007.15 and 1007.17, in accordance... Medicaid Fraud Control Units (Units). OIG uses the information received to assess and determine the Units...

75 FR 52948 - Agency Information Collection Request; 60-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

.... Proposed Project: State Medicaid Fraud Control Units' Reports--OMB No. 0990-0162-Extension--Office of the... requirements in Title 19 of the Social Security Act at 1903(q) and 42 CFR 1007.15 and 1007.17, in accordance... Medicaid Fraud Control Units (Units). OIG uses the information received to assess and determine the Units...

Using operational data to estimate the reliable yields of water-supply wells

NASA Astrophysics Data System (ADS)

Misstear, Bruce D. R.; Beeson, Sarah

The reliable yield of a water-supply well depends on many different factors, including the properties of the well and the aquifer; the capacities of the pumps, raw-water mains, and treatment works; the interference effects from other wells; and the constraints imposed by ion licences, water quality, and environmental issues. A relatively simple methodology for estimating reliable yields has been developed that takes into account all of these factors. The methodology is based mainly on an analysis of water-level and source-output data, where such data are available. Good operational data are especially important when dealing with wells in shallow, unconfined, fissure-flow aquifers, where actual well performance may vary considerably from that predicted using a more analytical approach. Key issues in the yield-assessment process are the identification of a deepest advisable pumping water level, and the collection of the appropriate well, aquifer, and operational data. Although developed for water-supply operators in the United Kingdom, this approach to estimating the reliable yields of water-supply wells using operational data should be applicable to a wide range of hydrogeological conditions elsewhere. Résumé La productivité d'un puits capté pour l'adduction d'eau potable dépend de différents facteurs, parmi lesquels les propriétés du puits et de l'aquifère, la puissance des pompes, le traitement des eaux brutes, les effets d'interférences avec d'autres puits et les contraintes imposées par les autorisations d'exploitation, par la qualité des eaux et par les conditions environnementales. Une méthodologie relativement simple d'estimation de la productivité qui prenne en compte tous ces facteurs a été mise au point. Cette méthodologie est basée surtout sur une analyse des données concernant le niveau piézométrique et le débit de prélèvement, quand ces données sont disponibles. De bonnes données opérationnelles sont particulièrement importantes quand il s'agit de puits dans des aquifères fissurés, libres et peu profonds, dans lesquels la performance réelle d'un puits peut varier considérablement de celle prédite à partir d'une approche plus analytique. Des données essentielles dans les processus d'estimation de la productivité sont l'identification d'un niveau piézométrique de pompage le plus profond possible et le recueil de données opérationnelles appropriées concernant le puits et l'aquifère. Bien qu'elle ait été développée pour des opérateurs gérant des captages en Grande-Bretagne, cette approche de l'estimation de la productivité des puits de captage d'eau potable à partir de données opérationnelles peut être appliquée à une large gamme de conditions hydrogéologiques en d'autres lieux. Resumen La productividad de un pozo de abastecimiento depende de varios factores, entre los que se incluyen las propiedades del pozo y del acuífero, la capacidad de la bomba, las obras de mantenimiento, la interferencia de otras captaciones y las restricciones impuestas por permisos legales, calidad del agua y aspectos ambientales. Se ha desarrollado una metodología relativamente simple para estimar la productividad de un pozo teniendo en cuenta todos los factores previamente mencionados. Esta metodología se basa principalmente en el análisis de niveles y caudales cuando estos datos están disponibles. Se requieren buenos datos de operación, principalmente cuando el pozo está situado en un acuífero de poco espesor, no confinado y en medio fracturado, donde la respuesta del sistema puede diferir enormemente de la predicción analítica. Un punto destacado en el estudio de productividad es la identificación del descenso máximo admisible. Aunque desarrollada para el Reino Unido, la metodología puede ser utilizada a un amplio rango de condiciones hidrogeológicas en otras zonas del mundo.

Salinity Trends in the Upper Colorado River Basin Upstream From the Grand Valley Salinity Control Unit, Colorado, 1986-2003

USGS Publications Warehouse

Leib, Kenneth J.; Bauch, Nancy J.

2008-01-01

In 1974, the Colorado River Basin Salinity Control Act was passed into law. This law was enacted to address concerns regarding the salinity content of the Colorado River. The law authorized various construction projects in selected areas or 'units' of the Colorado River Basin intended to reduce the salinity load in the Colorado River. One such area was the Grand Valley Salinity Control Unit in western Colorado. The U. S. Geological Survey has done extensive studies and research in the Grand Valley Salinity Control Unit that provide information to aid the U.S. Bureau of Reclamation and the Natural Resources Conservation Service in determining where salinity-control work may provide the best results, and to what extent salinity-control work was effective in reducing salinity concentrations and loads in the Colorado River. Previous studies have indicated that salinity concentrations and loads have been decreasing downstream from the Grand Valley Salinity Control Unit, and that the decreases are likely the result of salinity control work in these areas. Several of these reports; however, also document decreasing salinity loads upstream from the Grand Valley Salinity Control Unit. This finding was important because only a small amount of salinity-control work was being done in areas upstream from the Grand Valley Salinity Control Unit at the time the findings were reported (late 1990?s). As a result of those previous findings, the U.S. Bureau of Reclamation entered into a cooperative agreement with the U.S. Geological Survey to investigate salinity trends in selected areas bracketing the Grand Valley Salinity Control Unit and regions upstream from the Grand Valley Salinity Control Unit. The results of the study indicate that salinity loads were decreasing upstream from the Grand Valley Salinity Control Unit from 1986 through 2003, but the rates of decrease have slowed during the last 10 years. The average rate of decrease in salinity load upstream from the Grand Valley Salinity Control Unit was 10,700 tons/year. This accounts for approximately 27 percent of the decrease observed downstream from the Grand Valley Salinity Control Unit. Salinity loads were decreasing at the fastest rate (6,950 tons/year) in Region 4, which drains an area between the Colorado River at Cameo, Colorado (station CAMEO) and Colorado River above Glenwood Springs, Colorado (station GLEN) streamflow-gaging stations. Trends in salinity concentration and streamflow were tested at station CAMEO to determine if salinity concentration, streamflow, or both are controlling salinity loads upstream from the Grand Valley Salinity Control Unit. Trend tests of individual ion concentrations were included as potential indicators of what sources (based on mineral composition) may be controlling trends in the upper Colorado. No significant trend was detected for streamflow from 1986 to 2003 at station CAMEO; however, a significant downward trend was detected for salinity concentration. The trend slope indicates that salinity concentration is decreasing at a median rate of about 3.54 milligrams per liter per year. Five major ions (calcium, magnesium, sodium, sulfate, and chloride) were tested for trends. The results indicate that processes within source areas with rock and soil types (or other unidentified sources) bearing calcium, sodium, and sulfate had the largest effect on the downward trend in salinity load upstream from station CAMEO. Downward trends in salinity load resulting from ground-water sources and/or land-use change were thought to be possible reasons for the observed decreases in salinity loads; however, the cause or causes of the decreasing salinity loads are not fully understood. A reduction in the amount of ground-water percolation from Region 4 (resulting from work done through Federal irrigation system improvement programs as well as privately funded irrigation system improvements) has helped reduce annual salinity load from Region 4 by approxima

Introducing vibro-acupuncture: a psychophysical study.

PubMed

Wang, Kelun; Larsen, Dennis Boye; Jensen, Tanja Kim; Liu, Tiejun; Liu, Zhuxuan; Arendt-Nielsen, Lars

2016-10-01

To potentially enhance the effects of conventional acupuncture, a novel acu-vibrator (prototype) has been developed to perform vibro-acupuncture (VA). The aim of this psychophysical study was to investigate the subjective sensations of VA compared with conventional manual acupuncture (MA) and non-penetrating sham acupuncture (SA). 30 young healthy volunteers (21 men and 9 women) received VA, MA, and SA at LI4 and LI10 in a randomised, single-blind, placebo-controlled, cross-over manner. After 25 min of treatment, the Massachusetts General Hospital (MGH) acupuncture sensation scale (MASS), McGill pain questionnaire (MPQ), and numerical rating scale (NRS; 0-10) were employed followed by the acupuncture credibility and indication scale. Adverse events were investigated after treatment. Data were analysed using Friedman's test for repeated measures on ranks and post hoc Wilcoxon signed-rank tests with Bonferroni correction. The MASS scores were significantly higher during MA and VA compared with SA at both LI4 and LI10 (p<0.017). Treatment with VA evoked significantly higher vibration sensations compared with MA and SA (p<0.005). Treatment with SA yielded significantly lower NRS and MPQ scores compared with MA and VA (p<0.001) with no difference between MA and VA (p>0.05). Blinding of participants was achieved for SA and MA; however, VA was correctly identified in 29 of 30 subjects due to the characteristic vibrational stimulation. No serious adverse events were recorded for any of the treatments. Subjective sensations were influenced by treatment mode, with MA and VA yielding higher stimulation responses compared with SA. VA evoked specific vibrational sensations beyond MA, which might have specific effects in various disorders. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Tuning of PID controllers for boiler-turbine units.

PubMed

Tan, Wen; Liu, Jizhen; Fang, Fang; Chen, Yanqiao

2004-10-01

A simple two-by-two model for a boiler-turbine unit is demonstrated in this paper. The model can capture the essential dynamics of a unit. The design of a coordinated controller is discussed based on this model. A PID control structure is derived, and a tuning procedure is proposed. The examples show that the method is easy to apply and can achieve acceptable performance.

40 CFR 75.19 - Optional SO2, NOX, and CO2 emissions calculation for low mass emissions (LME) units.

Code of Federal Regulations, 2010 CFR

2010-07-01

...), manufacturer and model, and must have the same history of modifications (e.g., have the same controls installed... (or group of identical units) equipped with SCR (or SNCR) and uses dry low-NOX technology to control... with add-on NOX emission controls, and for units that use dry low-NOX technology, the owner or operator...

MAS2-8 radar and digital control unit

NASA Technical Reports Server (NTRS)

Oberg, J. M.; Ulaby, F. T.

1974-01-01

The design of the MAS 2-8 (2 to 8 GHz microwave-active spectrometer), a ground-based sensor system, is presented. A major modification in 1974 to the MAS 2-8, that of a control subsystem to automate the data-taking operation, is the prime focus. The digital control unit automatically changes all system parameters except FM rate and records the return signal on paper tape. The overall system operation and a detailed discussion of the design and operation of the digital control unit are presented.

Variable-Displacement Hydraulic Drive Unit

NASA Technical Reports Server (NTRS)

Lang, D. J.; Linton, D. J.; Markunas, A.

1986-01-01

Hydraulic power controlled through multiple feedback loops. In hydraulic drive unit, power closely matched to demand, thereby saving energy. Hydraulic flow to and from motor adjusted by motor-control valve connected to wobbler. Wobbler angle determines motor-control-valve position, which in turn determines motor displacement. Concept applicable to machine tools, aircraft controls, and marine controls.

22 CFR 120.29 - Missile Technology Control Regime.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Missile Technology Control Regime. 120.29... DEFINITIONS § 120.29 Missile Technology Control Regime. (a) For purposes of this subchapter, Missile Technology Control Regime (MTCR) means the policy statement between the United States, the United Kingdom...

40 CFR 1033.510 - Auxiliary power units.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Auxiliary power units. 1033.510 Section 1033.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.510 Auxiliary power units. If your...

40 CFR 1033.510 - Auxiliary power units.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Auxiliary power units. 1033.510 Section 1033.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.510 Auxiliary power units. If your...

40 CFR 1033.510 - Auxiliary power units.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Auxiliary power units. 1033.510 Section 1033.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.510 Auxiliary power units. If your...

40 CFR 1033.510 - Auxiliary power units.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Auxiliary power units. 1033.510 Section 1033.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.510 Auxiliary power units. If your...

40 CFR 1033.510 - Auxiliary power units.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Auxiliary power units. 1033.510 Section 1033.510 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.510 Auxiliary power units. If your...

Oximeter reliability in a subzero environment.

PubMed

Macnab, A J; Smith, M; Phillips, N; Smart, P

1996-11-01

Pulse oximeters optimize care in the pre-hospital setting. As British Columbia ambulance teams often provide care in subzero temperatures, we conducted a study to determine the reliability of 3 commercially-available portable oximeters in a subzero environment. We hypothesized that there is no significant difference between SaO2 readings obtained using a pulse oximeter at room temperature and a pulse oximeter operating at sub-zero temperatures. Subjects were stable normothermic children in intensive care on Hewlett Packard monitors (control unit) at room temperature. The test units were packed in dry ice in an insulated bin (temperature - 15 degrees C to -30 degrees C) and their sensors placed on the subjects, contralateral to the control sensors. Data were collected simultaneously from test and control units immediately following validation of control unit values by co-oximetry (blood gas). No data were unacceptable. Two units (Propaq 106EC and Nonin 8500N) functioned well to < -15 degrees C, providing data comparable to those obtained from the control unit (p < 0.001). The Siemens Micro O2 did not function at the temperatures tested. Monitor users who require equipment to function in subzero environments (military, Coast Guard, Mountain Rescue) should ensure that function is reliable, and could test units using this method.

75 FR 17839 - National Cancer Control Month, 2010

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... Cancer Control Month, 2010 By the President of the United States of America A Proclamation Cancer is.... During National Cancer Control Month, let us renew our commitment to combat this disease by raising... as ``Cancer Control Month.'' NOW, THEREFORE, I, BARACK OBAMA, President of the United States of...

12 CFR 243.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the United States; (ii) Controls a bank in the United States; or (iii) Controls an Edge corporation... Board and for which such determination is still in effect. (o) Rapid and orderly resolution means a... failure of the covered company would have serious adverse effects on financial stability in the United...

12 CFR 243.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the United States; (ii) Controls a bank in the United States; or (iii) Controls an Edge corporation... Board and for which such determination is still in effect. (o) Rapid and orderly resolution means a... failure of the covered company would have serious adverse effects on financial stability in the United...

12 CFR 243.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the United States; (ii) Controls a bank in the United States; or (iii) Controls an Edge corporation... Board and for which such determination is still in effect. (o) Rapid and orderly resolution means a... failure of the covered company would have serious adverse effects on financial stability in the United...

12 CFR 381.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the United States; (ii) Controls a bank in the United States; or (iii) Controls an Edge corporation... Board and for which such determination is still in effect. (o) Rapid and orderly resolution means a... failure of the covered company would have serious adverse effects on financial stability in the United...

12 CFR 381.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the United States; (ii) Controls a bank in the United States; or (iii) Controls an Edge corporation... Board and for which such determination is still in effect. (o) Rapid and orderly resolution means a... failure of the covered company would have serious adverse effects on financial stability in the United...

RF control hardware design for CYCIAE-100 cyclotron

NASA Astrophysics Data System (ADS)

Yin, Zhiguo; Fu, Xiaoliang; Ji, Bin; Zhao, Zhenlu; Zhang, Tianjue; Li, Pengzhan; Wei, Junyi; Xing, Jiansheng; Wang, Chuan

2015-11-01

The Beijing Radioactive Ion-beam Facility project is being constructed by BRIF division of China Institute of Atomic Energy. In this project, a 100 MeV high intensity compact proton cyclotron is built for multiple applications. The first successful beam extraction of CYCIAE-100 cyclotron was done in the middle of 2014. The extracted proton beam energy is 100 MeV and the beam current is more than 20 μA. The RF system of the CYCIAE-100 cyclotron includes two half-wavelength cavities, two 100 kW tetrode amplifiers and power transmission line systems (all above are independent from each other) and two sets of Low Level RF control crates. Each set of LLRF control includes an amplitude control unit, a tuning control unit, a phase control unit, a local Digital Signal Process control unit and an Advanced RISC Machines based EPICS IOC unit. These two identical LLRF control crates share one common reference clock and take advantages of modern digital technologies (e.g. DSP and Direct Digital Synthesizer) to achieve closed loop voltage and phase regulations of the dee-voltage. In the beam commission, the measured dee-voltage stability of RF system is better than 0.1% and phase stability is better than 0.03°. The hardware design of the LLRF system will be reviewed in this paper.

Design of a Microprogram Control Unit with Concurrent Error Detection.

DTIC Science & Technology

1984-08-01

I fxoot Office of Naval Research N/A N00039-80-C-0556 ta. ADDRESS (City. St.. and ZIP Cod 10. SOURCE OF FUNOING N0. -PROGRAM PROJECT TASK WORK UNIT...However, the CED concept is mainly applied to various codes data transmission, and simple functional units, such as arithmetic units. Little work has...been done in the control unit area. Previous work is primarily in the use of clanical self-checking circuits, using bit slicin& parity, and m-out-of-n

Information management system breadboard data acquisition and control system.

NASA Technical Reports Server (NTRS)

Mallary, W. E.

1972-01-01

Description of a breadboard configuration of an advanced information management system based on requirements for high data rates and local and centralized computation for subsystems and experiments to be housed on a space station. The system is to contain a 10-megabit-per-second digital data bus, remote terminals with preprocessor capabilities, and a central multiprocessor. A concept definition is presented for the data acquisition and control system breadboard, and a detailed account is given of the operation of the bus control unit, the bus itself, and the remote acquisition and control unit. The data bus control unit is capable of operating under control of both its own test panel and the test processor. In either mode it is capable of both single- and multiple-message operation in that it can accept a block of data requests or update commands for transmission to the remote acquisition and control unit, which in turn is capable of three levels of data-handling complexity.

The trend of digital control system design for nuclear power plants in Korea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, S. H.; Jung, H. Y.; Yang, C. Y.

2006-07-01

Currently there are 20 nuclear power plants (NPPs) in operation, and 6 more units are under construction in Korea. The control systems of those NPPs have also been developed together with the technology advancement. Control systems started with On-Off control using the relay logic, had been evolved into Solid-State logic using TTL ICs, and applied with the micro-processors since the Yonggwang NPP Units 3 and 4 which started its construction in 1989. Multiplexers are also installed at the local plant areas to collect field input and to send output signals while communicating with the controllers located in the system cabinetsmore » near the main control room in order to reduce the field wiring cables. The design of the digital control system technology for the NPPs in Korea has been optimized to maximize the operability as well as the safety through the design, construction, start-up and operation experiences. Both Shin-Kori Units 1 and 2 and Shin-Wolsong Units 1 and 2 NPP projects under construction are being progressed at the same time. Digital Plant Control Systems of these projects have adopted multi-loop controllers, redundant loop configuration, and soft control system for the radwaste system. Programmable Logic Controller (PLC) and Distributed Control System (DCS) are applied with soft control system in Shin-Kori Units 3 and 4. This paper describes the evolvement of control system at the NPPs in Korea and the experience and design improvement through the observation of the latest failure of the digital control system. In addition, design concept and its trend of the digital control system being applied to the NPP in Korea are introduced. (authors)« less

Solar heating system final design package

NASA Technical Reports Server (NTRS)

1979-01-01

The system is composed of a warm air collector, a logic control unit and a universal switching and transport unit. The collector was originally conceived and designed as an integrated roof/wall system and therefore provides a dual function in the structure. The collector serves both as a solar energy conversion system and as a structural weather resistant skin. The control unit provides totally automatic control over the operation of the system. It receives input data from sensor probes in collectors, storage and living space. The logic was designed so as to make maximum use of solar energy and minimize use of conventional energy. The transport and switching unit is a high-efficiency air-handling system equipped with gear motor valves that respond to outputs from the control system. The fan unit was designed for maximum durability and efficiency in operation, and has permanently lubricated ball bearings and excellent air-handling efficiency.

System for loading executable code into volatile memory in a downhole tool

DOEpatents

Hall, David R.; Bartholomew, David B.; Johnson, Monte L.

2007-09-25

A system for loading an executable code into volatile memory in a downhole tool string component comprises a surface control unit comprising executable code. An integrated downhole network comprises data transmission elements in communication with the surface control unit and the volatile memory. The executable code, stored in the surface control unit, is not permanently stored in the downhole tool string component. In a preferred embodiment of the present invention, the downhole tool string component comprises boot memory. In another embodiment, the executable code is an operating system executable code. Preferably, the volatile memory comprises random access memory (RAM). A method for loading executable code to volatile memory in a downhole tool string component comprises sending the code from the surface control unit to a processor in the downhole tool string component over the network. A central processing unit writes the executable code in the volatile memory.

Orderly recruitment of motor units under optical control in vivo.

PubMed

Llewellyn, Michael E; Thompson, Kimberly R; Deisseroth, Karl; Delp, Scott L

2010-10-01

A drawback of electrical stimulation for muscle control is that large, fatigable motor units are preferentially recruited before smaller motor units by the lowest-intensity electrical cuff stimulation. This phenomenon limits therapeutic applications because it is precisely the opposite of the normal physiological (orderly) recruitment pattern; therefore, a mechanism to achieve orderly recruitment has been a long-sought goal in physiology, medicine and engineering. Here we demonstrate a technology for reliable orderly recruitment in vivo. We find that under optical control with microbial opsins, recruitment of motor units proceeds in the physiological recruitment sequence, as indicated by multiple independent measures of motor unit recruitment including conduction latency, contraction and relaxation times, stimulation threshold and fatigue. As a result, we observed enhanced performance and reduced fatigue in vivo. These findings point to an unanticipated new modality of neural control with broad implications for nervous system and neuromuscular physiology, disease research and therapeutic innovation.

An extensible, low-cost drifter control unit

NASA Astrophysics Data System (ADS)

Giudici, Andrea; Torsvik, Tomas; Soomere, Tarmo

2017-04-01

We introduce an extensible, low-cost drifter control unit, which is developed for use with surface drifters that are deployed in inland water bodies or near-coast regions. The control unit is custom-built on top of a small footprint micro controller. It makes use of a GPS receiver for position tracking, a GSM radio for data transmission, and two sensor buses to handle analog and digital data measured by an array of external sensors. A cloud-based data collection platform receives and stores the data transmitted over GPRS from the drifter. The control unit was found to perform satisfactorily in operational testing, providing data at sub-Hz frequency for position and temperature during extended time. Test deployments revealed some issues related to power consumption spikes. Even though the unit is fully functional in the present form and shows, on average, low energy consumption , battery packs with relatively large maximum output power are required to ensure its operation within prolonged periods of time. We expect that a further development of the power supply unit together with a careful de-synchronization scheme of sensors' operation would smooth those peaks without any loss of the quality of recorded information.

Communicating with residential electrical devices via a vehicle telematics unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roth, Rebecca C.; Pebbles, Paul H.

A method of communicating with residential electrical devices using a vehicle telematics unit includes receiving information identifying a residential electrical device to control; displaying in a vehicle one or more controlled features of the identified residential electrical device; receiving from a vehicle occupant a selection of the displayed controlled features of the residential electrical device; sending an instruction from the vehicle telematics unit to the residential electrical device via a wireless carrier system in response to the received selection; and controlling the residential electrical device using the sent instruction.

17. ROSS POWERHOUSE: BUTTERFLY VALVE CONTROLS FOR UNIT 43. THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. ROSS POWERHOUSE: BUTTERFLY VALVE CONTROLS FOR UNIT 43. THE BUTTERFLY VALVE LOCK INDICATES THE BUTTERFLY VALVE IS CLOSED AS UNIT 43 WAS SHUT DOWN FOR REPAIRS, 1989. - Skagit Power Development, Ross Powerhouse, On Skagit River, 10.7 miles upstream from Newhalem, Newhalem, Whatcom County, WA

Hardware math for the 6502 microprocessor

NASA Technical Reports Server (NTRS)

Kissel, R.; Currie, J.

1985-01-01

A floating-point arithmetic unit is described which is being used in the Ground Facility of Large Space Structures Control Verification (GF/LSSCV). The experiment uses two complete inertial measurement units and a set of three gimbal torquers in a closed loop to control the structural vibrations in a flexible test article (beam). A 6502 (8-bit) microprocessor controls four AMD 9511A floating-point arithmetic units to do all the computation in 20 milliseconds.

System and Method for High-Speed Data Recording

NASA Technical Reports Server (NTRS)

Taveniku, Mikael B. (Inventor)

2017-01-01

A system and method for high speed data recording includes a control computer and a disk pack unit. The disk pack is provided within a shell that provides handling and protection for the disk packs. The disk pack unit provides cooling of the disks and connection for power and disk signaling. A standard connection is provided between the control computer and the disk pack unit. The disk pack units are self sufficient and able to connect to any computer. Multiple disk packs are connected simultaneously to the system, so that one disk pack can be active while one or more disk packs are inactive. To control for power surges, the power to each disk pack is controlled programmatically for the group of disks in a disk pack.

Hierarchical control of motor units in voluntary contractions.

PubMed

De Luca, Carlo J; Contessa, Paola

2012-01-01

For the past five decades there has been wide acceptance of a relationship between the firing rate of motor units and the afterhyperpolarization of motoneurons. It has been promulgated that the higher-threshold, larger-soma, motoneurons fire faster than the lower-threshold, smaller-soma, motor units. This relationship was based on studies on anesthetized cats with electrically stimulated motoneurons. We questioned its applicability to motor unit control during voluntary contractions in humans. We found that during linearly force-increasing contractions, firing rates increased as exponential functions. At any time and force level, including at recruitment, the firing rate values were inversely related to the recruitment threshold of the motor unit. The time constants of the exponential functions were directly related to the recruitment threshold. From the Henneman size principle it follows that the characteristics of the firing rates are also related to the size of the soma. The "firing rate spectrum" presents a beautifully simple control scheme in which, at any given time or force, the firing rate value of earlier-recruited motor units is greater than that of later-recruited motor units. This hierarchical control scheme describes a mechanism that provides an effective economy of force generation for the earlier-recruited lower force-twitch motor units, and reduces the fatigue of later-recruited higher force-twitch motor units-both characteristics being well suited for generating and sustaining force during the fight-or-flight response.

OCDR guided laser ablation device

DOEpatents

Dasilva, Luiz B.; Colston, Jr., Bill W.; James, Dale L.

2002-01-01

A guided laser ablation device. The device includes a mulitmode laser ablation fiber that is surrounded by one or more single mode optical fibers that are used to image in the vicinity of the laser ablation area to prevent tissue damage. The laser ablation device is combined with an optical coherence domain reflectometry (OCDR) unit and with a control unit which initializes the OCDR unit and a high power laser of the ablation device. Data from the OCDR unit is analyzed by the control unit and used to control the high power laser. The OCDR images up to about 3 mm ahead of the ablation surface to enable a user to see sensitive tissue such as a nerve or artery before damaging it by the laser.

Contribution from motor unit firing adaptations and muscle co-activation during fatigue.

PubMed

Contessa, Paola; Letizi, John; De Luca, Gianluca; Kline, Joshua C

2018-03-14

The control of motor unit firing behavior during fatigue is still debated in the literature. Most studies agree that the central nervous system increases the excitation to the motoneuron pool to compensate for decreased force contributions of individual motor units and sustain muscle force output during fatigue. However, some studies claim that motor units may decrease their firing rates despite increased excitation, contradicting the direct relationship between firing rates and excitation that governs the voluntary control of motor units. To investigate whether the control of motor units in fact changes with fatigue, we measured motor unit firing behavior during repeated contractions of the first dorsal interosseous (FDI) muscle while concurrently monitoring the activation of surrounding muscles - including the flexor carpi radialis, extensor carpi radialis, and pronator teres. Across all subjects, we observed an overall increase in FDI activation and motor unit firing rates by the end of the fatigue task. However, in some subjects we observed increases in FDI activation and motor unit firing rates only during the initial phase of the fatigue task, followed by subsequent decreases during the late phase of the fatigue task while the co-activation of surrounding muscles increased. These findings indicate that the strategy for sustaining force output may occasionally change leading to increases in the relative activation of surrounding muscles while the excitation to the fatiguing muscle decreases. Importantly, irrespective of changes in the strategy for sustaining force output, the control properties regulating motor unit firing behavior remain unchanged during fatigue.

Knowledge Gaps Impacting the Development of Bovine Viral Diarrhea Virus Control Programs in the United States

USDA-ARS?s Scientific Manuscript database

This paper identifies knowledge gaps that impact on the design of programs to control and or eradicate bovine viral diarrhea viruses (BVDV) in the United States. Currently there are several voluntary regional BVDV control programs in place. These control programs are aimed at the removal of animals ...

Development of a Practical Broadband Active Vibration Control System

NASA Technical Reports Server (NTRS)

Schiller, Noah H.; Perey, Daniel F.; Cabell, Randolph H.

2011-01-01

The goal of this work is to develop robust, lightweight, and low-power control units that can be used to suppress structural vibration in flexible aerospace structures. In particular, this paper focuses on active damping, which is implemented using compact decentralized control units distributed over the structure. Each control unit consists of a diamond-shaped piezoelectric patch actuator, three miniature accelerometers, and analog electronics. The responses from the accelerometers are added together and then integrated to give a signal proportional to velocity. The signal is then inverted, amplified, and applied to the actuator, which generates a control force that is out of phase with the measured velocity. This paper describes the development of the control system, including a detailed description of the control and power electronics. The paper also presents experimental results acquired on a Plexiglas window blank. Five identical control units installed around the perimeter of the window achieved 10 dB peak reductions and a 2.4 dB integrated reduction of the spatially averaged velocity of the window between 500 and 3000 Hz.

Controlling Energy Radiations of Electromagnetic Waves via Frequency Coding Metamaterials.

PubMed

Wu, Haotian; Liu, Shuo; Wan, Xiang; Zhang, Lei; Wang, Dan; Li, Lianlin; Cui, Tie Jun

2017-09-01

Metamaterials are artificial structures composed of subwavelength unit cells to control electromagnetic (EM) waves. The spatial coding representation of metamaterial has the ability to describe the material in a digital way. The spatial coding metamaterials are typically constructed by unit cells that have similar shapes with fixed functionality. Here, the concept of frequency coding metamaterial is proposed, which achieves different controls of EM energy radiations with a fixed spatial coding pattern when the frequency changes. In this case, not only different phase responses of the unit cells are considered, but also different phase sensitivities are also required. Due to different frequency sensitivities of unit cells, two units with the same phase response at the initial frequency may have different phase responses at higher frequency. To describe the frequency coding property of unit cell, digitalized frequency sensitivity is proposed, in which the units are encoded with digits "0" and "1" to represent the low and high phase sensitivities, respectively. By this merit, two degrees of freedom, spatial coding and frequency coding, are obtained to control the EM energy radiations by a new class of frequency-spatial coding metamaterials. The above concepts and physical phenomena are confirmed by numerical simulations and experiments.

21 CFR 211.160 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... drafted by the appropriate organizational unit and reviewed and approved by the quality control unit. The...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Laboratory Controls § 211.160... procedures, or other laboratory control mechanisms required by this subpart, including any change in such...

31 CFR 545.527 - Diplomatic pouches.

Code of Federal Regulations, 2010 CFR

2010-07-01

... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TALIBAN (AFGHANISTAN) SANCTIONS REGULATIONS Licenses... with the importation into the United States from the territory of Afghanistan controlled by the Taliban, or the exportation from the United States to the territory of Afghanistan controlled by the Taliban...

40 CFR 1039.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... maintaining and using the engine, including the emission-control system. The maintenance instructions also...,000 hours: Fuel injectors, turbochargers, catalytic converters, electronic control units, EGR systems..., catalytic converters, electronic control units, EGR systems (including related components, but excluding...

40 CFR 1039.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... maintaining and using the engine, including the emission-control system. The maintenance instructions also...,000 hours: Fuel injectors, turbochargers, catalytic converters, electronic control units, EGR systems..., catalytic converters, electronic control units, EGR systems (including related components, but excluding...

40 CFR 1039.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... maintaining and using the engine, including the emission-control system. The maintenance instructions also...,000 hours: Fuel injectors, turbochargers, catalytic converters, electronic control units, EGR systems..., catalytic converters, electronic control units, EGR systems (including related components, but excluding...

40 CFR 1039.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... maintaining and using the engine, including the emission-control system. The maintenance instructions also...,000 hours: Fuel injectors, turbochargers, catalytic converters, electronic control units, EGR systems..., catalytic converters, electronic control units, EGR systems (including related components, but excluding...

Maintenance of Occupational Control: The Case of Professions.

ERIC Educational Resources Information Center

Child, John; Fulk, Janet

1982-01-01

Contemporary conditions relevant to the maintenance of occupational control are examined for five professions (accounting, architecture, civil engineering, law, and medicine) in the United Kingdom and the United States as an impetus for the analysis of control by occupations in general. (Author/CT)

[YANG's pricking-cupping therapy for knee osteoarthritis: a multi-center randomized controlled trial].

PubMed

Wang, Bo; Liu, Xiru; Hu, Zhihai; Sun, Aijun; Ma, Yanwen; Chen Yingying; Zhang, Xuzhi; Liu, Meiling; Wang, Yi; Wang, Shuoshuo; Zhang, Yunjia; Li, Yijing; Shen, Weidong

2016-02-01

To evaluate the clinical efficacy of YANG's pricking-cupping therapy for knee osteoar thritis (KOA). Methods This was a multi-center randomized parallel controlled trial. One hundred and seventy one patients with KOA were randomly allocated to a pricking-cupping group (89 cases) and a conventional acu puncture group (82 cases). Neixiyan (EX-LE 4), Dubi (ST 35) and ashi points were selected in the two groups. Patients in the pricking-cupping group were treated with YANG's pricking-cupping therapy; the seven-star needles were used to perform pricking at acupoints, then cupping was used until slight bleeding was observed. Patients in the conventional acupuncture group were treated with semi-standardized filiform needle therapy. The treatment was given for 4 weeks (from a minimum of 5 times to a maximum of 10 times). The follow-up visit was 4 weeks. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and the visual analogue scale (VAS) were adopted for the efficacy assessments. The pain score, stiffness score, physical function score and total score of WOMAC were all reduced after 4-week treatment and during follow-up visit in the two groups (all P<0. 0001). Except that the difference of stiffness score between the two groups was not significant after 4-week treatment (P>0. 05), each score and total score of WOMAC in the pricking-cupping group were lower than those in the conventional acupuncture group after 4-week treatment and during follow-up visit (P<0. 0001, P<0. 01). After 2-week treatment, 4-week treatment and during follow-up visit, the VAS was all reduced compared with that before treatment (all P<0. 0001) ; with the increase of the treatment, the reducing trend of VAS was more significant (P<0. 0001). The scores of VAS in the pricking-cupping group were lower than those in the conventional acupuncture group after 4-week treatment and during follow-up visit (P < 0. 01, P <0. 0001). CONCLUSION The YANG's pricking-cupping and conventional acupuncture therapy can both significantly improve knee joint pain and function in patients with KOA, which are relatively safe. The pricking cupping therapy is superior to conventional acupuncture with the identical selection of acupoints.

Treatment of severe insulin resistance in pregnancy with 500 units per milliliter of concentrated insulin.

PubMed

Mendez-Figueroa, Hector; Maggio, Lindsay; Dahlke, Joshua D; Daley, Julie; Lopes, Vrishali V; Coustan, Donald R; Rouse, Dwight J

2013-07-01

To evaluate glycemic control and pregnancy outcomes among pregnant women with severe insulin resistance treated with 500 units/mL concentrated insulin. Retrospective analysis of gravid women with severe insulin resistance (need for greater than 100 units of insulin per injection or greater than 200 units/d) treated with either 500 units/mL concentrated insulin or conventional insulin therapy. We performed a two-part analysis: 1) between gravid women treated with and without 500 units/mL concentrated insulin; and 2) among gravid women treated with 500 units/mL concentrated insulin, comparing glycemic control before and after its initiation. Seventy-three pregnant women with severe insulin resistance were treated with 500 units/mL concentrated insulin and 78 with conventional insulin regimens. Patients treated with 500 units/mL concentrated insulin were older and more likely to have type 2 diabetes mellitus. Average body mass index was comparable between both groups (38.6 compared with 40.4, P=.11) as were obstetric and perinatal outcomes and glycemic control during the last week of gestation. Within the 500 units/mL concentrated insulin cohort, after initiation of this medication, fasting and postprandial blood glucose concentrations improved. However, the rates of blood glucose values less than 60 mg/dL and less than 50 mg/dL were higher in the 500 units/mL concentrated insulin group after initiation than before, 4.8% compared with 2.0% (P<.01) and 2.0% compared with 0.7% (P<.01), respectively. The use of 500 units/mL concentrated insulin in severely obese insulin-resistant pregnant women confers similar glycemic control compared with traditional insulin regimens but may increase the risk of hypoglycemia. II.

Molecular mechanisms underlying the effects of acupuncture on neuropathic pain

PubMed Central

Ju, Ziyong; Cui, Huashun; Guo, Xiaohui; Yang, Huayuan; He, Jinsen; Wang, Ke

2013-01-01

Acupuncture has been used to treat neuropathic pain for a long time, but its mechanisms of action remain unknown. In this study, we observed the effects of electroacupuncture and manual acu-puncture on neuropathic pain and on ephrin-B/EphB signaling in rats models of chronic constriction injury-induced neuropathic pain. The results showed that manual acupuncture and elec-puncture significantly reduced mechanical hypersensitivity following chronic constriction injury, es-pecially electroacupuncture treatment. Real-time PCR results revealed that ephrin-B1/B3 and EphB1/B2 mRNA expression levels were significantly increased in the spinal dorsal horns of chronic constriction injury rats. Electroacupuncture and manual acupuncture suppressed the high sion of ephrin-B1 mRNA, and elevated EphB3/B4 mRNA expression. Electroacupuncture signifi-cantly enhanced the mRNA expression of ephrin-B3 and EphB3/B6 in the dorsal horns of neuro-pathic pain rats. Western blot results revealed that electroacupuncture in particular, and manual acupuncture, significantly up-regulated ephrin-B3 protein levels in rat spinal dorsal horns. The re-sults of this study suggest that acupuncture could activate ephrin-B/EphB signaling in neuropathic pain rats and improve neurological function. PMID:25206545

Molecular mechanisms underlying the effects of acupuncture on neuropathic pain.

PubMed

Ju, Ziyong; Cui, Huashun; Guo, Xiaohui; Yang, Huayuan; He, Jinsen; Wang, Ke

2013-09-05

Acupuncture has been used to treat neuropathic pain for a long time, but its mechanisms of action remain unknown. In this study, we observed the effects of electroacupuncture and manual acu-puncture on neuropathic pain and on ephrin-B/EphB signaling in rats models of chronic constriction injury-induced neuropathic pain. The results showed that manual acupuncture and elec-puncture significantly reduced mechanical hypersensitivity following chronic constriction injury, es-pecially electroacupuncture treatment. Real-time PCR results revealed that ephrin-B1/B3 and EphB1/B2 mRNA expression levels were significantly increased in the spinal dorsal horns of chronic constriction injury rats. Electroacupuncture and manual acupuncture suppressed the high sion of ephrin-B1 mRNA, and elevated EphB3/B4 mRNA expression. Electroacupuncture signifi-cantly enhanced the mRNA expression of ephrin-B3 and EphB3/B6 in the dorsal horns of neuro-pathic pain rats. Western blot results revealed that electroacupuncture in particular, and manual acupuncture, significantly up-regulated ephrin-B3 protein levels in rat spinal dorsal horns. The re-sults of this study suggest that acupuncture could activate ephrin-B/EphB signaling in neuropathic pain rats and improve neurological function.

Supervisory Control Information Management Research (SCIMR) Studies: Determination of Efficiency for a Variety of Input Control Equipment (DEVICE)

DTIC Science & Technology

2010-08-01

Belkin n52te, the Saitek Cyborg Command Unit, the Wacom Bamboo Fun with stylus, the Wacom Bamboo Fun with touch, and the Xbox 360 controller...4 4 Saitek Cyborg Command Unit function mapping ....................................... 4 iv 5 Wacom Bamboo Fun with stylus and touch...versus Belkin n52te by task . 30 B-2 Participants’ preferences for standard mouse versus Saitek Cyborg Command Unit by task

Comparison of JP-8 Sprays from a Hydraulically Actuated Electronically Controlled Unit Injector and a Common Rail Injector

DTIC Science & Technology

2015-10-01

acquired of a calibration plate to provide scaling for the injector orifices. The determined scaling factor for the images was 0.3 µm/pixel. A circle...Controlled Unit Injector and a Common Rail Injector by Matthew Kurman, Michael Tess, Luis Bravo, Chol-Bum Kweon, and Craig Hershey Reprinted...Comparison of JP-8 Sprays from a Hydraulically Actuated Electronically Controlled Unit Injector and a Common Rail Injector by Matthew Kurman

40 CFR 97.621 - Recordation of TR SO2 Group 1 allowance allocations and auction results.

Code of Federal Regulations, 2012 CFR

2012-07-01

... allocated to the TR SO2 Group 1 units at the source in accordance with § 97.611(a) for the control period in... allocated to the TR SO2 Group 1 units at the source in accordance with § 97.611(a) for the control period in... SO2 Group 1 units at the source in accordance with § 97.611(a) for the control period in 2013. (c) By...

40 CFR 97.721 - Recordation of TR SO2 Group 2 allowance allocations and auction results.

Code of Federal Regulations, 2012 CFR

2012-07-01

... allocated to the TR SO2 Group 2 units at the source in accordance with § 97.711(a) for the control period in... allocated to the TR SO2 Group 2 units at the source in accordance with § 97.711(a) for the control period in... SO2 Group 2 units at the source in accordance with § 97.711(a) for the control period in 2013. (c) By...

42 CFR 455.21 - Cooperation with State Medicaid fraud control units.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subchapter. In using this information, the unit must protect the privacy rights of beneficiaries; and (3) On... 42 Public Health 4 2014-10-01 2014-10-01 false Cooperation with State Medicaid fraud control units. 455.21 Section 455.21 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND...

75 FR 66101 - Agency Information Collection Request. 30-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... Medicaid Fraud Control Units' Reports--OMB No. 0990-0162-Extension--Office of Inspector General (OIG... collection of information to specifically comply with the requirements in Title 19 of the Social Security Act... Inspector General (OIG) by the fifty established State Medicaid Fraud Control Units (Units). OIG uses the...

77 FR 4588 - Incapital LLC and Incapital Unit Trust; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... sales charge. If such a market is not maintained at any time for any Series, holders of the Units... future unit investment trusts (collectively, with the Incapital Trust, the ``Trusts'') and series of the Trusts (``Series'') that are sponsored by Incapital or any entity controlling, controlled by or under...

Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine

NASA Astrophysics Data System (ADS)

Funke, H. H.-W.; Börner, S.; Hendrick, P.; Recker, E.

2011-10-01

The control of pollutant emissions has become more and more important by the development of new gas turbines. The use of hydrogen produced by renewable energy sources could be an alternative. Besides the reduction of NOx emissions emerged during the combustion process, another major question is how a hydrogen fuelled gas turbine including the metering unit can be controlled and operated. This paper presents a first insight in modifications on an Auxiliary Power Unit (APU) GTCP 36300 for using gaseous hydrogen as a gas turbine fuel. For safe operation with hydrogen, the metering of hydrogen has to be fast, precise, and secure. So, the quality of the metering unit's control loop has an important influence on this topic. The paper documents the empiric determination of the proportional integral derivative (PID) control parameters for the metering unit.

Integrated optics reflectometer

DOEpatents

Couch, Philip R; Murphy, Kent A.; Gunther, Michael F; Gause, Charles B

2017-01-31

An apparatus includes a laser source configured to output laser light at a target frequency, and a measurement unit configured to measure a deviation between an actual frequency outputted by the laser source at a current period of time and the target frequency of the laser source. The apparatus includes a feedback control unit configured to, based on the measured deviation between the actual and target frequencies, control the laser source to maintain a constant frequency of laser output from the laser source so that the frequency of laser light transmitted from the laser source is adjusted to the target frequency. The feedback control unit can control the laser source to maintain a linear rate of change in the frequency of its laser light output, and compensate for characteristics of the measurement unit utilized for frequency measurement. A method is provided for performing the feedback control of the laser source.

Effects of iodine in microbial control of dental treatment water.

PubMed

Puttaiah, Raghunath; Seibert, Jeff; Spears, Robert

2011-05-01

To determine the effects of low levels of iodine constantly present in the dental unit water system on microbial control of dental treatment water and biofilm control. This study used a dental unit water system simulator with eight dental unit waterline systems built to scale and function, each controlled via computer. Each of the eight units was operated independently, four units supplied with self-contained water reservoirs and four units supplied with municipal water. Four units were precleaned to remove biofilm buildup. The study had a well-balanced design with equal representation (variables) of presence/absence of biofilms, selfcontained reservoirs for introduction of treatment water, source water directly connected to municipal water source and iodinated cartridges within the self-contained reservoirs and between municipal water and dental unit. Point-of-use iodinated resin cartridges (IRC) were retrofitted proximal to handpiece and air/ water syringe tip lines in four units, and iodinated resin water cartridges (IRSWC) were fitted to the other four units at the source water output. Heterotrophic plate counts were performed at baseline and twice weekly for a period of 6 weeks. One representative waterline sample was taken from each group at baseline and end-of-study to analyze changes in biofilm status using scanning electron microscopy. Waterlines not previously contaminated with biofilms did not show organization of biofilm matrix in units equipped with IRSWC. Constantly present low levels of iodine, demonstrated some disruption of biofilms in waterlines already contaminated with mature biofilms. All groups showed contamination levels < 500 cfu/ml (colony forming units per milliliter) consistent with the CDC and ADA guidelines. In this 6 weeks study, IRSWC equipped waterlines showed disruption of established biofilms, controlled formation of new biofilms in clean lines and rendered the dental treatment water < 500 cfu/ml. Point-of-use iodinated resin cartridges were also effective in controlling contamination in the dental treatment water. Dental unit water systems that are in use get contaminated with microbes and biofilms in weeks of being put into use. These biofilms contaminate the treatment water thereby putting patients and staff at risk of infection by predominantly gram-negative microbes. Biofilms in the water systems must be cleaned periodically with a strong decontaminant and the dental treatment source water needs to be modified with a low-grade antimicrobial that can preserve the water quality yet safe to humans. In this translational research study, we evaluate the effects of elemental iodine dissolved in water flowing through an iodine containing cartridge in controlling biofilm and dental treatment water contamination using a dental unit water system simulator, prior to clinical utilization.

40 CFR 63.864 - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... that uses an air pollution control system other than an ESP, wet scrubber, RTO, or fabric filter must... unit equipped with an alternative air pollution control system and monitoring operating parameters... affected source or process unit equipped with an alternative air pollution control system and monitoring...

40 CFR 63.864 - Monitoring requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... that uses an air pollution control system other than an ESP, wet scrubber, RTO, or fabric filter must... unit equipped with an alternative air pollution control system and monitoring operating parameters... affected source or process unit equipped with an alternative air pollution control system and monitoring...

40 CFR 63.864 - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... that uses an air pollution control system other than an ESP, wet scrubber, RTO, or fabric filter must... unit equipped with an alternative air pollution control system and monitoring operating parameters... affected source or process unit equipped with an alternative air pollution control system and monitoring...

142. STANDBY PRESSURE CONTROL UNIT FOR FUEL AND LIQUID OXYGEN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

142. STANDBY PRESSURE CONTROL UNIT FOR FUEL AND LIQUID OXYGEN IN SOUTHWEST PORTION OF CONTROL ROOM (214), LSB (BLDG. 751), FACING WEST - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Feed-forward control of a solid oxide fuel cell system with anode offgas recycle

NASA Astrophysics Data System (ADS)

Carré, Maxime; Brandenburger, Ralf; Friede, Wolfgang; Lapicque, François; Limbeck, Uwe; da Silva, Pedro

2015-05-01

In this work a combined heat and power unit (CHP unit) based on the solid oxide fuel cell (SOFC) technology is analysed. This unit has a special feature: the anode offgas is partially recycled to the anode inlet. Thus it is possible to increase the electrical efficiency and the system can be operated without external water feeding. A feed-forward control concept which allows secure operating conditions of the CHP unit as well as a maximization of its electrical efficiency is introduced and validated experimentally. The control algorithm requires a limited number of measurement values and few deterministic relations for its description.

Convergence of pattern generator outputs on a common mechanism of diaphragm motor unit recruitment

PubMed Central

Mantilla, Carlos B.; Seven, Yasin B.; Sieck, Gary C.

2014-01-01

Motor units are the final element of neuromotor control. In manner analogous to the organization of neuromotor control in other skeletal muscles, diaphragm motor units comprise phrenic motoneurons located in the cervical spinal cord that innervate the diaphragm muscle, the main inspiratory muscle in mammals. Diaphragm motor units play a primary role in sustaining ventilation, but are also active in other non-ventilatory behaviors, including coughing, sneezing, vomiting, defecation and parturition. Diaphragm muscle fibers comprise all fiber types. Thus, diaphragm motor units display substantial differences in contractile and fatigue properties, but importantly properties of the motoneuron and muscle fibers within a motor unit are matched. As in other skeletal muscles, diaphragm motor units are recruited in order such that motor units that display greater fatigue resistance are recruited earlier and more often than more fatigable motor units. The properties of the motor unit population are critical determinants of the function of a skeletal muscle across the range of possible motor tasks. Accordingly, fatigue-resistant motor units are sufficient to generate the forces necessary for ventilatory behaviors whereas more fatigable units are only activated during expulsive behaviors important for airway clearance. Neuromotor control of diaphragm motor units may reflect selective inputs from distinct pattern generators distributed according to the motor unit properties necessary to accomplish these different motor tasks. In contrast, widely-distributed inputs to phrenic motoneurons from various pattern generators (e.g., for breathing, coughing or vocalization) would dictate recruitment order based on intrinsic electrophysiological properties. PMID:24746055

26 CFR 1.956-1 - Shareholder's pro rata share of a controlled foreign corporation's increase in earnings invested...

Code of Federal Regulations, 2010 CFR

2010-04-01

... controlled foreign corporation's investment of earnings in United States property—(1) Dividend limitation... foreign corporation's increase in earnings invested in United States property. 1.956-1 Section 1.956-1...) INCOME TAXES Controlled Foreign Corporations § 1.956-1 Shareholder's pro rata share of a controlled...

77 FR 46373 - Field Release of Aphelinus glycinis for the Biological Control of the Soybean Aphid in the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

... Inspection Service [Docket No APHIS-2012-0061] Field Release of Aphelinus glycinis for the Biological Control... for the biological control of the soybean aphid, Aphis glycines, in the continental United States. We... glycinis for the Biological Control of the Soybean Aphid in the Continental United States'' (March 2012...

Design of BLDCM emulator for transmission control units

NASA Astrophysics Data System (ADS)

Liu, Chang; He, Yongyi; Zhang, Bodong

2018-04-01

According to the testing requirements of the transmission control unit, a brushless DC motor emulating system is designed based on motor simulation and power hardware-in-the-loop. The discrete motor model is established and a real-time numerical method is designed to solve the motor states. The motor emulator directly interacts with power stage of the transmission control unit using a power-efficient circuit topology and is compatible with sensor-less control. Experiments on a laboratory prototype help to verify that the system can emulate the real motor currents and voltages whenever the motor is starting up or suddenly loaded.

System and method for identifying, reporting, and evaluating presence of substance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Maurice; Lusby, Michael; Van Hook, Arthur

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive andmore » evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.« less

System and method for identifying, reporting, and evaluating presence of substance

DOEpatents

Smith, Maurice [Kansas City, MO; Lusby, Michael [Kansas City, MO; Van Hook, Arthur [Lotawana, MO; Cook, Charles J [Raytown, MO; Wenski, Edward G [Lenexa, KS; Solyom, David [Overland Park, KS

2012-02-14

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive and evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.

System And Method For Identifying, Reporting, And Evaluating Presence Of Substance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Maurice; Lusby, Michael; Hook, Arthur Van

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive andmore » evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.« less

40 CFR 52.1488 - Visibility protection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... substituting equivalent or superior control technology, provided such technology meets applicable emission... operator shall meet the following deadlines for design and construction of the emission control equipment... binding contract to design the SO2, opacity and NOX control systems for Unit 1 and Unit 2 by March 1, 2003...

40 CFR 52.1488 - Visibility protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... substituting equivalent or superior control technology, provided such technology meets applicable emission... operator shall meet the following deadlines for design and construction of the emission control equipment... binding contract to design the SO2, opacity and NOX control systems for Unit 1 and Unit 2 by March 1, 2003...

40 CFR 52.1488 - Visibility protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... substituting equivalent or superior control technology, provided such technology meets applicable emission... operator shall meet the following deadlines for design and construction of the emission control equipment... binding contract to design the SO2, opacity and NOX control systems for Unit 1 and Unit 2 by March 1, 2003...

40 CFR 52.1488 - Visibility protection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... substituting equivalent or superior control technology, provided such technology meets applicable emission... operator shall meet the following deadlines for design and construction of the emission control equipment... binding contract to design the SO2, opacity and NOX control systems for Unit 1 and Unit 2 by March 1, 2003...

21 CFR 211.100 - Written procedures; deviations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Process Controls § 211.100 Written procedures; deviations. (a) There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality... approved by the appropriate organizational units and reviewed and approved by the quality control unit. (b...

21 CFR 211.100 - Written procedures; deviations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Process Controls § 211.100 Written procedures; deviations. (a) There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality... approved by the appropriate organizational units and reviewed and approved by the quality control unit. (b...

21 CFR 211.100 - Written procedures; deviations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Process Controls § 211.100 Written procedures; deviations. (a) There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality... approved by the appropriate organizational units and reviewed and approved by the quality control unit. (b...

21 CFR 211.100 - Written procedures; deviations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Process Controls § 211.100 Written procedures; deviations. (a) There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality... approved by the appropriate organizational units and reviewed and approved by the quality control unit. (b...

21 CFR 211.100 - Written procedures; deviations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Process Controls § 211.100 Written procedures; deviations. (a) There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality... approved by the appropriate organizational units and reviewed and approved by the quality control unit. (b...

Software Development for EECU Platform of Turbofan Engine

NASA Astrophysics Data System (ADS)

Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

2017-04-01

The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 2 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/19/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

Command, Control, Communications, Computers and Intelligence Electronic Warfare (C4IEW) Project Book, Fiscal Year 1994. (Non-FOUO Version)

DTIC Science & Technology

1994-04-01

TSW-7A, AIR TRAFFIC CONTROL CENTRAL (ATCC) 32- 8 AN/TTC-41(V), CENTRAL OFFICE, TELEPHONE, AUTOMATIC 32- 9 MISSILE COUNTERMEASURE DEVICE (MCD) .- 0 MK...a Handheld Terminal Unit (HTU), Portable Computer Unit (PCU), Transportable Computer Unit (TCU), and compatible NOI peripheral devices . All but the...CLASSIFICATION: ASARC-III, Jun 80, Standard. I I I AN/TIC-39 IS A MOBILE , AUTOMATIC , MODULAR ELECTRONIC CIRCUIT SWITCH UNDER PROCESSOR CONTROL WITH INTEGRAL

Direct cortical control of 3D neuroprosthetic devices.

PubMed

Taylor, Dawn M; Tillery, Stephen I Helms; Schwartz, Andrew B

2002-06-07

Three-dimensional (3D) movement of neuroprosthetic devices can be controlled by the activity of cortical neurons when appropriate algorithms are used to decode intended movement in real time. Previous studies assumed that neurons maintain fixed tuning properties, and the studies used subjects who were unaware of the movements predicted by their recorded units. In this study, subjects had real-time visual feedback of their brain-controlled trajectories. Cell tuning properties changed when used for brain-controlled movements. By using control algorithms that track these changes, subjects made long sequences of 3D movements using far fewer cortical units than expected. Daily practice improved movement accuracy and the directional tuning of these units.

Facility versus unit level reporting of quality indicators in nursing homes when performance monitoring is the goal

PubMed Central

Norton, Peter G; Murray, Michael; Doupe, Malcolm B; Cummings, Greta G; Poss, Jeff W; Squires, Janet E; Teare, Gary F; Estabrooks, Carole A

2014-01-01

Objectives To demonstrate the benefit of defining operational management units in nursing homes and computing quality indicators on these units as well as on the whole facility. Design Calculation of adjusted Resident Assessment Instrument – Minimum Data Set 2.0 (RAI–MDS 2.0) quality indicators for: PRU05 (prevalence of residents with a stage 2–4 pressure ulcer), PAI0X (prevalence of residents with pain) and DRG01 (prevalence of residents receiving an antipsychotic with no diagnosis of psychosis), for quarterly assessments between 2007 and 2011 at unit and facility levels. Comparisons of these risk-adjusted quality indicators using statistical process control (control charts). Setting A representative sample of 30 urban nursing homes in the three Canadian Prairie Provinces. Measurements Explicit decision rules were developed and tested to determine whether the control charts demonstrated improving, worsening, unchanging or unclassifiable trends over the time period. Unit and facility performance were compared. Results In 48.9% of the units studied, unit control chart performance indicated different changes in quality over the reporting period than did the facility chart. Examples are provided to illustrate that these differences lead to quite different quality interventions. Conclusions Our results demonstrate the necessity of considering facility-level and unit-level measurement when calculating quality indicators derived from the RAI–MDS 2.0 data, and quite probably from any RAI measures. PMID:24523428

Hierarchical control of motor units in voluntary contractions

PubMed Central

Contessa, Paola

2012-01-01

For the past five decades there has been wide acceptance of a relationship between the firing rate of motor units and the afterhyperpolarization of motoneurons. It has been promulgated that the higher-threshold, larger-soma, motoneurons fire faster than the lower-threshold, smaller-soma, motor units. This relationship was based on studies on anesthetized cats with electrically stimulated motoneurons. We questioned its applicability to motor unit control during voluntary contractions in humans. We found that during linearly force-increasing contractions, firing rates increased as exponential functions. At any time and force level, including at recruitment, the firing rate values were inversely related to the recruitment threshold of the motor unit. The time constants of the exponential functions were directly related to the recruitment threshold. From the Henneman size principle it follows that the characteristics of the firing rates are also related to the size of the soma. The “firing rate spectrum” presents a beautifully simple control scheme in which, at any given time or force, the firing rate value of earlier-recruited motor units is greater than that of later-recruited motor units. This hierarchical control scheme describes a mechanism that provides an effective economy of force generation for the earlier-recruited lower force-twitch motor units, and reduces the fatigue of later-recruited higher force-twitch motor units—both characteristics being well suited for generating and sustaining force during the fight-or-flight response. PMID:21975447

Service equipment for use in hostile environments

NASA Technical Reports Server (NTRS)

Dolce, James L. (Inventor); Gordon, Andrew L. (Inventor)

1994-01-01

Service equipment for use in hostile environments includes a detachable service unit secured to a stationary service unit. The detachable service unit includes a housing with an exterior plate, a power control interface for connection to an exterior power source, locating pins located in said exterior plate, an electrical connector in the exterior plate electrically coupled to said power control interface, and a pair of clamping receptacles formed in the exterior plate and located on adjacent opposite edges of the exterior plate. The stationary unit includes an electrical connector for connection to the electrical connector of the detachable service unit, a clamping apparatus for clamping and unclamping the detachable service unit from the stationary unit, a base clamp assembly for mounting the clamping apparatus onto the stationary unit, and locating pin holes for receiving the locating pins and aligning the detachable service unit onto the stationary unit. The detachable service unit and stationary unit have mating scalloped faces which aid in alignment and provide a mechanism for heat dissipation.

An examination of the origin and evolution of additional tandem repeats in the mitochondrial DNA control region of Japanese sika deer (Cervus Nippon).

PubMed

Ba, Hengxing; Wu, Lang; Liu, Zongyue; Li, Chunyi

2016-01-01

Tandem repeat units are only detected in the left domain of the mitochondrial DNA control region in sika deer. Previous studies showed that Japanese sika deer have more tandem repeat units than its cousins from the Asian continent and Taiwan, which often have only three repeat units. To determine the origin and evolution of these additional repeat units in Japanese sika deer, we obtained the sequence of repeat units from an expanded dataset of the control region from all sika deer lineages. The functional constraint is inferred to act on the first repeat unit because this repeat has the least sequence divergence in comparison to the other units. Based on slipped-strand mispairing mechanisms, the illegitimate elongation model could account for the addition or deletion of these additional repeat units in the Japanese sika deer population. We also report that these additional repeat units could be occurring in the internal positions of tandem repeat regions, possibly via coupling with a homogenization mechanism within and among these lineages. Moreover, the increased number of repeat units in the Japanese sika deer population could reflect a balance between mutation and selection, as well as genetic drift.

Development of a reference Phasor Measurement Unit (PMU) for the monitoring and control of grid stability and quality

NASA Astrophysics Data System (ADS)

Ndilimabaka, Hervé; Blanc, Isabelle

2014-08-01

This paper discusses the details of the development of a Phasor Measurement Unit regarding the requirements of the IEEE C37.118-2005 synchrophasor standard relative to steady-state conditions on grid monitoring and control. This phasor measurement unit is intended to be used for field tests sooner.

78 FR 73900 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... discrete unit of an effective system of internal controls at a member firm are presumed to be related, and provided the following examples of the ``most discrete unit of an effective system of internal controls... that there should not be a presumption that algorithms within the most discrete trading units are...

Pre-release assessment of Gadirtha inexacta a proposed biological control agent of Chinese tallow (Triadica sebifera) in the United States

USDA-ARS?s Scientific Manuscript database

Native to China, Chinese tallow, Triadica sebifera (Euphorbiaceae) is an aggressive woody invader in the southeastern United States. The noctuid, Gadirtha inexacta, is a multivoltine herbivore attacking this plant in China. To evaluate its potential as a biological control agent in the United States...

47 CFR 90.421 - Operation of mobile station units not under the control of the licensee.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Operating Requirements § 90... unauthorized operation of such units not under its control. (a) Public Safety Pool. (1) Mobile units licensed in the Public Safety Pool may be installed in any vehicle which in an emergency would require...

A system for the delivery of programmable, adaptive stimulation intensity envelopes for drop foot correction applications.

PubMed

Breen, P P; O'Keeffe, D T; Conway, R; Lyons, G M

2006-03-01

We describe the design of an intelligent drop foot stimulator unit for use in conjunction with a commercial neuromuscular electrical nerve stimulation (NMES) unit, the NT2000. The developed micro-controller unit interfaces to a personal computer (PC) and a graphical user interface (GUI) allows the clinician to graphically specify the shape of the stimulation intensity envelope required for a subject undergoing drop foot correction. The developed unit is based on the ADuC812S micro-controller evaluation board from Analog Devices and uses two force sensitive resistor (FSR) based foot-switches to control application of stimulus. The unit has the ability to display to the clinician how the stimulus intensity envelope is being delivered during walking using a data capture capability. The developed system has a built-in algorithm to dynamically adjust the delivery of stimulus to reflect changes both within the gait cycle and from cycle to cycle. Thus, adaptive control of stimulus intensity is achieved.

A containerless levitation setup for liquid processing in a superconducting magnet.

PubMed

Lu, Hui-Meng; Yin, Da-Chuan; Li, Hai-Sheng; Geng, Li-Qiang; Zhang, Chen-Yan; Lu, Qin-Qin; Guo, Yun-Zhu; Guo, Wei-Hong; Shang, Peng; Wakayama, Nobuko I

2008-09-01

Containerless processing of materials is considered beneficial for obtaining high quality products due to the elimination of the detrimental effects coming from the contact with container walls. Many containerless processing methods are realized by levitation techniques. This paper describes a containerless levitation setup that utilized the magnetization force generated in a gradient magnetic field. It comprises a levitation unit, a temperature control unit, and a real-time observation unit. Known volume of liquid diamagnetic samples can be levitated in the levitation chamber, the temperature of which is controlled using the temperature control unit. The evolution of the levitated sample is observed in real time using the observation unit. With this setup, containerless processing of liquid such as crystal growth from solution can be realized in a well-controlled manner. Since the levitation is achieved using a superconducting magnet, experiments requiring long duration time such as protein crystallization and simulation of space environment for living system can be easily succeeded.

A Transformation Approach to Optimal Control Problems with Bounded State Variables

NASA Technical Reports Server (NTRS)

Hanafy, Lawrence Hanafy

1971-01-01

A technique is described and utilized in the study of the solutions to various general problems in optimal control theory, which are converted in to Lagrange problems in the calculus of variations. This is accomplished by mapping certain properties in Euclidean space onto closed control and state regions. Nonlinear control problems with a unit m cube as control region and unit n cube as state region are considered.

Reduced Order Adaptive Controllers for Distributed Parameter Systems

DTIC Science & Technology

2005-09-01

pitch moment [J313. Neural Network adaptive output feedback control for intensive care unit sedation and intraop- erative anesthesia . Neural network...depth of anesthesia for noncardiac surgery [C3, J15]. These results present an extension of [C8, J9, J10]. Modelling and vibration control of...for Intensive Care Unit Sedation and Operating Room Hypnosis , Submitted to 6 Special Issue of SIAM Journal of Control and Optimization on Control

Examining the relationships between span of control and manager job and unit performance outcomes.

PubMed

Wong, Carol A; Elliott-Miller, Pat; Laschinger, Heather; Cuddihy, Michael; Meyer, Raquel M; Keatings, Margaret; Burnett, Camille; Szudy, Natalie

2015-03-01

Our aim was to examine the combination of frontline manager (FLM) personal characteristics and span of control (SOC) on their job and unit performance outcomes. Healthcare downsizing and reform have contributed to larger spans for FLMs in Canadian hospitals and increased concerns about manager workload. Despite a heightened awareness of SOC issues among decision makers, there is limited empirical evidence related to the effects of SOC on outcomes. A non-experimental predictive survey design was used to examine FLM SOC in 14 Canadian academic hospitals. Managers (n = 121) completed an online survey of work characteristics and The Ottawa Hospital (TOH) SOC tool. Unit turnover data were collected from organisational databases. The combination of SOC and core self-evaluation significantly predicted role overload, work control and job satisfaction, but only SOC predicted unit adverse outcomes and neither significantly predicted unit turnover. The findings contribute to an understanding of connections between the combination of SOC and core self-evaluation and manager job and unit performance outcomes. Organisational strategies to create manageable FLM SOC are essential to ensure exemplary job and unit outcomes. Core self-evaluation is a personality characteristic that may enhance manager performance in the face of high spans of control. © 2013 John Wiley & Sons Ltd.

Controlling Energy Radiations of Electromagnetic Waves via Frequency Coding Metamaterials

PubMed Central

Wu, Haotian; Liu, Shuo; Wan, Xiang; Zhang, Lei; Wang, Dan; Li, Lianlin

2017-01-01

Metamaterials are artificial structures composed of subwavelength unit cells to control electromagnetic (EM) waves. The spatial coding representation of metamaterial has the ability to describe the material in a digital way. The spatial coding metamaterials are typically constructed by unit cells that have similar shapes with fixed functionality. Here, the concept of frequency coding metamaterial is proposed, which achieves different controls of EM energy radiations with a fixed spatial coding pattern when the frequency changes. In this case, not only different phase responses of the unit cells are considered, but also different phase sensitivities are also required. Due to different frequency sensitivities of unit cells, two units with the same phase response at the initial frequency may have different phase responses at higher frequency. To describe the frequency coding property of unit cell, digitalized frequency sensitivity is proposed, in which the units are encoded with digits “0” and “1” to represent the low and high phase sensitivities, respectively. By this merit, two degrees of freedom, spatial coding and frequency coding, are obtained to control the EM energy radiations by a new class of frequency‐spatial coding metamaterials. The above concepts and physical phenomena are confirmed by numerical simulations and experiments. PMID:28932671

Asthma in Adults Fact Sheet

MedlinePlus

... American Lung Association Epidemiology and Statistics Unit using SPSS software. Center for Disease Control and Prevention. Behavioral ... American Lung Association Epidemiology and Statistics Unit using SPSS software. Centers for Disease Control and Prevention. National ...

Crash problem definition and safety benefits methodology for stability control for single-unit medium and heavy trucks and large-platform buses

DOT National Transportation Integrated Search

2009-10-01

This report presents the findings of a comprehensive engineering analysis of electronic stability control (ESC) and roll stability control (RSC) systems for single-unit medium and heavy trucks and large-platform buses. This report details the applica...

Programmable Logic Controllers. Teacher Edition.

ERIC Educational Resources Information Center

Rauh, Bob; Kaltwasser, Stan

These materials were developed for a seven-unit secondary or postsecondary education course on programmable logic controllers (PLCs) that treats most of the skills needed to work effectively with PLCs as programming skills. The seven units of the course cover the following topics: fundamentals of programmable logic controllers; contracts, timers,…

40 CFR 76.10 - Alternative emission limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; and (ii) The installed NOX emission control system has been designed to meet the applicable emission... that the unit and NOX emission control system were operated in accordance with the bid and design specifications on which the design of the NOX emission control system was based; and (C) Unit operating data as...

40 CFR 76.10 - Alternative emission limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; and (ii) The installed NOX emission control system has been designed to meet the applicable emission... that the unit and NOX emission control system were operated in accordance with the bid and design specifications on which the design of the NOX emission control system was based; and (C) Unit operating data as...

50 CFR 35.10 - Controlled burning.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false Controlled burning. 35.10 Section 35.10 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) THE... burning. Controlled burning will be permitted on wilderness units when such burning will contribute to the...

50 CFR 35.10 - Controlled burning.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false Controlled burning. 35.10 Section 35.10 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) THE... burning. Controlled burning will be permitted on wilderness units when such burning will contribute to the...

50 CFR 35.10 - Controlled burning.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Controlled burning. 35.10 Section 35.10 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) THE... burning. Controlled burning will be permitted on wilderness units when such burning will contribute to the...

50 CFR 35.10 - Controlled burning.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false Controlled burning. 35.10 Section 35.10 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) THE... burning. Controlled burning will be permitted on wilderness units when such burning will contribute to the...

50 CFR 35.10 - Controlled burning.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Controlled burning. 35.10 Section 35.10 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) THE... burning. Controlled burning will be permitted on wilderness units when such burning will contribute to the...

Downstream of downtown: urban wastewater as groundwater recharge

NASA Astrophysics Data System (ADS)

Foster, S. S. D.; Chilton, P. J.

Wastewater infiltration is often a major component of overall recharge to aquifers around urban areas, especially in more arid climates. Despite this, such recharge still represents only an incidental (or even accidental) byproduct of various current practices of sewage effluent handling and wastewater reuse. This topic is reviewed through reference to certain areas of detailed field research, with pragmatic approaches being identified to reduce the groundwater pollution hazard of these practices whilst attempting to retain their groundwater resource benefit. Since urban sewage effluent is probably the only `natural resource' whose global availability is steadily increasing, the socioeconomic importance of this topic for rapidly developing urban centres in the more arid parts of Asia, Africa, Latin America and the Middle East will be apparent. L'infiltration des eaux usées est souvent la composante essentielle de toute la recharge des aquifères des zones urbaines, particulièrement sous les climats les plus arides. Malgré cela, une telle recharge ne constitue encore qu'un sous-produit incident, ou même accidentel, de pratiques courantes variées du traitement de rejets d'égouts et de réutilisation d'eaux usées. Ce sujet est passé en revue en se référant à certaines régions étudiées en détail, par des approches pragmatiques reconnues pour permettre de réduire les risques de pollution des nappes dues à ces pratiques tout en permettant d'en tirer profit pour leur ressource en eau souterraine. Puisque les effluents d'égouts urbains sont probablement la seule « ressource naturelle » dont la disponibilité globale va croissant constamment, l'importance socio-économique de ce sujet est évidente pour les centres urbains à développement rapide de l'Asie, de l'Afrique, de l'Amérique latine et du Moyen-Orient. La infiltración de aguas residuales es a menudo un componente principal de la recarga total en acuíferos ubicados en torno a zonas urbanas, especialmente en los climas más áridos. A pesar de ello, dicho componente todavía es una consecuencia secundaria (o incluso accidental) de diversas prácticas asociadas con la manipulación de las aguas residuales y con la reutilitzación de aguas depuradas. Este tema se revisa mediante referencias a ciertas áreas en las que existen investigación detallada de campo, identificando enfoques pragmáticos con el fin de reducir el riesgo de contaminación de las aguas subterráneas por tales prácticas, a la vez tratando de conservar los beneficios para los recursos del acuífero. Dado que los efluentes de aguas residuales urbanas son probablemente la única `fuente natural' cuya disponibilidad global se halla en del aumento, la importancia socioeconómica de este tema será evidente para los centros urbanos de rápido desarrollo en Asia, Latinoamérica y Oriente Medio.

System Engineering and Integration Contract for Implementation of the National Airspace System Plan. Volume 2. Section 5.0 NAS Plan Project Findings.

DTIC Science & Technology

1984-08-01

and FPS-60 -’ vacuum-tube radars. There will be remote control interface units ( RCIU ) for tube-type radars, and an ARSR-3 relocation and RIH package...Facility RCE Remote Control Equipment; Radio Control Equipment RCIU Remote Control Interface Units RCO Remote Communications Outlet RDCC Research

Development of a simple MR-compatible vibrotactile stimulator using a planar-coil-type actuator.

PubMed

Kim, Hyung-Sik; Choi, Mi-Hyun; Chung, Yoon-Gi; Kim, Sung-Phil; Jun, Jae-Hoon; Park, Jang-Yeon; Yi, Jeong-Han; Park, Jong-Rak; Lim, Dae-Woon; Chung, Soon-Cheol

2013-06-01

For this study, we developed a magnetic resonance (MR)-compatible vibrotactile stimulator using a planar-coil-type actuator. The newly developed vibrotactile stimulator consists of three units: control unit, drive unit, and planar-coil-type actuator. The control unit controls frequency, intensity, time, and channel, and transfers the stimulation signals to the drive unit. The drive unit operates the planar-coil-type actuator in response to commands from the control unit. The planar-coil-type actuator, which uses a planar coil instead of conventional electric wire, generates vibrating stimulation through interaction of the current of the planar coil with the static magnetic field of the MR scanner. Even though the developed tactile stimulating system is small, simple, and inexpensive, it has a wide range of stimulation frequencies (20 ~ 400 Hz, at 40 levels) and stimulation intensities (0 ~ 7 V, at 256 levels). The stimulation intensity does not change due to frequency changes. Since the transient response time is a few microseconds, the stimulation time can be controlled on a scale of microseconds. In addition, this actuator has the advantages of providing highly repeatable stimulation, being durable, being able to assume various shapes, and having an adjustable contact area with the skin. The new stimulator operated stably in an MR environment without affecting the MR images. Using functional magnetic resonance imaging, we observed the brain activation changes resulting from stimulation frequency and intensity changes.

Autofocus system and autofocus method for focusing on a surface

DOEpatents

O'Neill, Mary Morabito

2017-05-23

An autofocus system includes an imaging device, a lens system and a focus control actuator that is configured to change a focus position of the imaging device in relation to a stage. The electronic control unit is configured to control the focus control actuator to a plurality of predetermined focus positions, and activate the imaging device to obtain an image at predetermined positions and then apply a spatial filter to the obtained images. This generates a filtered image for the obtained images. The control unit determines a focus score for the filtered images such that the focus score corresponds to a degree of focus in the obtained images. The control unit identifies a best focus position by comparing the focus score of the filtered images, and controls the focus control actuator to the best focus position corresponding to the highest focus score.

Digital communication system

NASA Technical Reports Server (NTRS)

Monford, L. G., Jr. (Inventor)

1974-01-01

A digital communication system is reported for parallel operation of 16 or more transceiver units with the use of only four interconnecting wires. A remote synchronization circuit produces unit address control words sequentially in data frames of 16 words. Means are provided in each transceiver unit to decode calling signals and to transmit calling and data signals. The transceivers communicate with each other over one data line. The synchronization unit communicates the address control information to the transceiver units over an address line and further provides the timing information over a clock line. A reference voltage level or ground line completes the interconnecting four wire hookup.

40 CFR 1033.650 - Incidental use exemption for Canadian and Mexican locomotives.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Special Compliance... the United States and that enter the United States temporarily from Canada or Mexico. We will approve...

40 CFR 1033.650 - Incidental use exemption for Canadian and Mexican locomotives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Special Compliance... the United States and that enter the United States temporarily from Canada or Mexico. We will approve...

40 CFR 1033.650 - Incidental use exemption for Canadian and Mexican locomotives.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Special Compliance... the United States and that enter the United States temporarily from Canada or Mexico. We will approve...

40 CFR 1033.650 - Incidental use exemption for Canadian and Mexican locomotives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Special Compliance... the United States and that enter the United States temporarily from Canada or Mexico. We will approve...

40 CFR 1033.650 - Incidental use exemption for Canadian and Mexican locomotives.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Special Compliance... the United States and that enter the United States temporarily from Canada or Mexico. We will approve...

Fluidic Emergency Thruster for Aircraft

NASA Technical Reports Server (NTRS)

Honda, T. S.

1972-01-01

The design, development, fabrication and test evaluation of two prototype fluidic emergency thrusters (FET) for aircraft stabilization are discussed. The fluidic control units were designed to provide, between two diametrically opposed nozzles, a thrust differential proportional to an input voltage signal. The emergency roll control requirements of the X-14 VTOL research aircraft were defined as typical design goals. Two control units, one on each wing tip, are intended to provide a maximum thrust of 224 pounds per unit. The units are designed to operate with 2500 psig, 2000 F gas from a solid propellant gas generator. The emergency system including the gas generator was designed to add less than 11 pounds per wing tip. The operating time under emergency conditions was specified as five seconds. The fluidic emergency thruster is similar in concept to a JATO system but has the added feature of controllable thrust.

Convergence of pattern generator outputs on a common mechanism of diaphragm motor unit recruitment.

PubMed

Mantilla, Carlos B; Seven, Yasin B; Sieck, Gary C

2014-01-01

Motor units are the final element of neuromotor control. In manner analogous to the organization of neuromotor control in other skeletal muscles, diaphragm motor units comprise phrenic motoneurons located in the cervical spinal cord that innervate the diaphragm muscle, the main inspiratory muscle in mammals. Diaphragm motor units play a primary role in sustaining ventilation but are also active in other nonventilatory behaviors, including coughing, sneezing, vomiting, defecation, and parturition. Diaphragm muscle fibers comprise all fiber types. Thus, diaphragm motor units display substantial differences in contractile and fatigue properties, but importantly, properties of the motoneuron and muscle fibers within a motor unit are matched. As in other skeletal muscles, diaphragm motor units are recruited in order such that motor units that display greater fatigue resistance are recruited earlier and more often than more fatigable motor units. The properties of the motor unit population are critical determinants of the function of a skeletal muscle across the range of possible motor tasks. Accordingly, fatigue-resistant motor units are sufficient to generate the forces necessary for ventilatory behaviors, whereas more fatigable units are only activated during expulsive behaviors important for airway clearance. Neuromotor control of diaphragm motor units may reflect selective inputs from distinct pattern generators distributed according to the motor unit properties necessary to accomplish these different motor tasks. In contrast, widely distributed inputs to phrenic motoneurons from various pattern generators (e.g., for breathing, coughing, or vocalization) would dictate recruitment order based on intrinsic electrophysiological properties. © 2014 Elsevier B.V. All rights reserved.

Estimation of the depth to the fresh-water/salt-water interface from vertical head gradients in wells in coastal and island aquifers

NASA Astrophysics Data System (ADS)

Izuka, Scot K.; Gingerich, Stephen B.

An accurate estimate of the depth to the theoretical interface between fresh, water and salt water is critical to estimates of well yields in coastal and island aquifers. The Ghyben-Herzberg relation, which is commonly used to estimate interface depth, can greatly underestimate or overestimate the fresh-water thickness, because it assumes no vertical head gradients and no vertical flow. Estimation of the interface depth needs to consider the vertical head gradients and aquifer anisotropy that may be present. This paper presents a method to calculate vertical head gradients using water-level measurements made during drilling of a partially penetrating well; the gradient is then used to estimate interface depth. Application of the method to a numerically simulated fresh-water/salt-water system shows that the method is most accurate when the gradient is measured in a deeply penetrating well. Even using a shallow well, the method more accurately estimates the interface position than does the Ghyben-Herzberg relation where substantial vertical head gradients exist. Application of the method to field data shows that drilling, collection methods of water-level data, and aquifer inhomogeneities can cause difficulties, but the effects of these difficulties can be minimized. Résumé Une estimation précise de la profondeur de l'interface théorique entre l'eau douce et l'eau salée est un élément critique dans les estimations de rendement des puits dans les aquifères insulaires et littoraux. La relation de Ghyben-Herzberg, qui est habituellement utilisée pour estimer la profondeur de cette interface, peut fortement sous-estimer ou surestimer l'épaisseur de l'eau douce, parce qu'elle suppose l'absence de gradient vertical de charge et d'écoulement vertical. L'estimation de la profondeur de l'interface requiert de prendre en considération les gradients verticaux de charge et l'éventuelle anisotropie de l'aquifère. Cet article propose une méthode de calcul des gradients verticaux de charge à partir des mesures de niveau piézométrique faites en cours de foration d'un puits incomplet; le gradient est alors utilisé pour estimer la profondeur de l'interface. L'application de cette méthode à un système eau douce - eau salée simulé numériquement montre que la méthode est la plus précise lorsque le gradient est mesuré dans un puits pénétrant profondément dans l'aquifère. Même en utilisant un puits peu profond, la méthode estime la position de l'interface avec plus de précision que ne le fait la relation de Ghyben-Herzberg lorsqu'il existe un gradient vertical de charge bien marqué. L'application de la méthode à des données de terrain montre que la foration, les méthodes de mesure de niveau et les hétérogénéités au sein de l'aquifère peuvent être la cause de difficultés, mais que les effets de ces difficultés peuvent être réduits. Resumen Para la estimación de la productividad de pozos en acuíferos costeros y en islas es necesaria una estimación precisa de la profundidad de la interfaz teórica entre agua dulce y agua salada. La relación de Ghyben-Herzberg, usada habitualmente para estimar la profundidad de la interfaz, puede subestimar o sobrestimar el espesor de agua dulce, al asumir la ausencia de flujos y gradientes verticales. La estimación de la profundidad de la interfaz debe considerar tanto estos gradientes verticales, como la posible anisotropía del acuífero. En este artículo se presenta un método para calcular los gradientes verticales de niveles a partir de las medidas obtenidas durante la perforación de un pozo parcialmente penetrante para, a partir de este gradiente, estimar la profundidad de la interfaz. La aplicación del método a un sistema de agua dulce/agua salada simulado numéricamente muestra que el método es más preciso cuando el gradiente se mide en un pozo profundo. Incluso en el caso de un pozo superficial, el método permite una estimación más precisa de la profundidad de la interfaz que la aplicación de la fórmula de Ghyben-Herzberg, en los casos en los que existen gradientes verticales significativos. La aplicación del método a datos reales muestra que la perforación, la recogida de datos de niveles y la heterogeneidad en el acuífero pueden causar dificultades en la aplicación del método, pero que estas pueden minimizarse.

Cost-effective retrofit technology for reducing peak power demand in small and medium commercial buildings

DOE PAGES

Nutaro, James J.; Fugate, David L.; Kuruganti, Teja; ...

2015-05-27

We describe a cost-effective retrofit technology that uses collective control of multiple rooftop air conditioning units to reduce the peak power consumption of small and medium commercial buildings. The proposed control uses a model of the building and air conditioning units to select an operating schedule for the air conditioning units that maintains a temperature set point subject to a constraint on the number of units that may operate simultaneously. A prototype of this new control system was built and deployed in a large gymnasium to coordinate four rooftop air conditioning units. Based on data collected while operating this prototype,more » we estimate that the cost savings achieved by reducing peak power consumption is sufficient to repay the cost of the prototype within a year.« less

Computer Vision for Artificially Intelligent Robotic Systems

NASA Astrophysics Data System (ADS)

Ma, Chialo; Ma, Yung-Lung

1987-04-01

In this paper An Acoustic Imaging Recognition System (AIRS) will be introduced which is installed on an Intelligent Robotic System and can recognize different type of Hand tools' by Dynamic pattern recognition. The dynamic pattern recognition is approached by look up table method in this case, the method can save a lot of calculation time and it is practicable. The Acoustic Imaging Recognition System (AIRS) is consist of four parts -- position control unit, pulse-echo signal processing unit, pattern recognition unit and main control unit. The position control of AIRS can rotate an angle of ±5 degree Horizental and Vertical seperately, the purpose of rotation is to find the maximum reflection intensity area, from the distance, angles and intensity of the target we can decide the characteristic of this target, of course all the decision is target, of course all the decision is processed bye the main control unit. In Pulse-Echo Signal Process Unit, we ultilize the correlation method, to overcome the limitation of short burst of ultrasonic, because the Correlation system can transmit large time bandwidth signals and obtain their resolution and increased intensity through pulse compression in the correlation receiver. The output of correlator is sampled and transfer into digital data by u law coding method, and this data together with delay time T, angle information OH, eV will be sent into main control unit for further analysis. The recognition process in this paper, we use dynamic look up table method, in this method at first we shall set up serval recognition pattern table and then the new pattern scanned by Transducer array will be devided into serval stages and compare with the sampling table. The comparison is implemented by dynamic programing and Markovian process. All the hardware control signals, such as optimum delay time for correlator receiver, horizental and vertical rotation angle for transducer plate, are controlled by the Main Control Unit, the Main Control Unit also handles the pattern recognition process. The distance from the target to the transducer plate is limitted by the power and beam angle of transducer elements, in this AIRS Model, we use a narrow beam transducer and it's input voltage is 50V p-p. A RobOt equipped with AIRS can not only measure the distance from the target but also recognize a three dimensional image of target from the image lab of Robot memory. Indexitems, Accoustic System, Supersonic transducer, Dynamic programming, Look-up-table, Image process, pattern Recognition, Quad Tree, Quadappoach.

Improved Performance Characteristics For Indium Antimonide Photovoltaic Detector Arrays Using A FET-Switched Multiplexing Technique

NASA Astrophysics Data System (ADS)

Ma, Yung-Lung; Ma, Chialo

1987-03-01

In this paper An Acoustic Imaging Recognition System (AIRS) will be introduced which is installed on an Intelligent Robotic System and can recognize different type of Hand tools' by Dynamic pattern recognition. The dynamic pattern recognition is approached by look up table method in this case, the method can save a lot of calculation time and it is practicable. The Acoustic Imaging Recognition System (AIRS) is consist of four parts _ position control unit, pulse-echo signal processing unit, pattern recognition unit and main control unit. The position control of AIRS can rotate an angle of ±5 degree Horizental and Vertical seperately, the purpose of rotation is to find the maximum reflection intensity area, from the distance, angles and intensity of the target we can decide the characteristic of this target, of course all the decision is target, of course all the decision is processed by the main control unit. In Pulse-Echo Signal Process Unit, we utilize the correlation method, to overcome the limitation of short burst of ultrasonic, because the Correlation system can transmit large time bandwidth signals and obtain their resolution and increased intensity through pulse compression in the correlation receiver. The output of correlator is sampled and transfer into digital data by p law coding method, and this data together with delay time T, angle information eH, eV will be sent into main control unit for further analysis. The recognition process in this paper, we use dynamic look up table method, in this method at first we shall set up serval recognition pattern table and then the new pattern scanned by Transducer array will be devided into serval stages and compare with the sampling table. The comparison is implemented by dynamic programing and Markovian process. All the hardware control signals, such as optimum delay time for correlator receiver, horizental and vertical rotation angle for transducer plate, are controlled by the Main Control Unit, the Main Control Unit also handles the pattern recognition process. The distance from the target to the transducer plate is limitted by the power and beam angle of transducer elements, in this AIRS Models, we use a narrow beam transducer and it's input voltage is 50V p-p. A Robot equipped with AIRS can not only measure the distance from the target but also recognize a three dimensional image of target from the image lab of Robot memory. Indexitems, Accoustic System, Supersonic transducer, Dynamic programming, Look-up-table, Image process, pattern Recognition, Quad Tree, Quadappoach.

A Short Guide to U.S. Arms Control Policy.

ERIC Educational Resources Information Center

Howard, Norman, Ed.; Sussman, Colleen, Ed.

Steps the United States is taking to lessen the danger of war while building international confidence and security are described. The commitment of the United States to arms control is based on the conviction that the United States and the Soviet Union have a common interest in the avoidance of nuclear war and the survival of the human race. A…

A re-evaluation of a case-control model with contaminated controls for resource selection studies

Treesearch

Christopher T. Rota; Joshua J. Millspaugh; Dylan C. Kesler; Chad P. Lehman; Mark A. Rumble; Catherine M. B. Jachowski

2013-01-01

A common sampling design in resource selection studies involves measuring resource attributes at sample units used by an animal and at sample units considered available for use. Few models can estimate the absolute probability of using a sample unit from such data, but such approaches are generally preferred over statistical methods that estimate a relative probability...

State Budgets, Unit Allocations, and Unit Emissions Rates

EPA Pesticide Factsheets

This Technical Support Document (TSD) provides information that supports EPA’s determination of state emissions budgets, unit-level allocations, direct control rate limits, and new unit set-asides for the Transport Rule proposal.

The Radio Frequency Health Node Wireless Sensor System

NASA Technical Reports Server (NTRS)

Valencia, J. Emilio; Stanley, Priscilla C.; Mackey, Paul J.

2009-01-01

The Radio Frequency Health Node (RFHN) wireless sensor system differs from other wireless sensor systems in ways originally intended to enhance utility as an instrumentation system for a spacecraft. The RFHN can also be adapted to use in terrestrial applications in which there are requirements for operational flexibility and integrability into higher-level instrumentation and data acquisition systems. As shown in the figure, the heart of the system is the RFHN, which is a unit that passes commands and data between (1) one or more commercially available wireless sensor units (optionally, also including wired sensor units) and (2) command and data interfaces with a local control computer that may be part of the spacecraft or other engineering system in which the wireless sensor system is installed. In turn, the local control computer can be in radio or wire communication with a remote control computer that may be part of a higher-level system. The remote control computer, acting via the local control computer and the RFHN, cannot only monitor readout data from the sensor units but can also remotely configure (program or reprogram) the RFHN and the sensor units during operation. In a spacecraft application, the RFHN and the sensor units can also be configured more nearly directly, prior to launch, via a serial interface that includes an umbilical cable between the spacecraft and ground support equipment. In either case, the RFHN wireless sensor system has the flexibility to be configured, as required, with different numbers and types of sensors for different applications. The RFHN can be used to effect realtime transfer of data from, and commands to, the wireless sensor units. It can also store data for later retrieval by an external computer. The RFHN communicates with the wireless sensor units via a radio transceiver module. The modular design of the RFHN makes it possible to add radio transceiver modules as needed to accommodate additional sets of wireless sensor units. The RFHN includes a core module that performs generic computer functions, including management of power and input, output, processing, and storage of data. In a typical application, the processing capabilities in the RFHN are utilized to perform preprocessing, trending, and fusion of sensor data. The core module also serves as the unit through which the remote control computer configures the sensor units and the rest of the RFHN.

Army Officer Duty Module Manual.

DTIC Science & Technology

1975-10-01

14l 3( RELATIVE CRITICALITY OF THIS Not Least (2) (3) The most PART (MOOULE) TO ENTIRE JOB aplicable critical Average Critical critical a. In actual...3 Directs and controls operations of mobile communications O- support unit -36- I. - O-G-5 Establishes and controls mobile area signal center 0-6-6...ENGINEERING O-EE-1 Directs .and controls combat engineer unit O-EE-2 Directs and controls portable bridging O-EE-3 Directs and controls mobile water

Biorational control programme for the German cockroach (Blattaria: Blattellidae) in selected urban communities.

PubMed

Shahraki, GholamHossein; Bin Ibrahim, Yusof; Noor, Hafidzi Mohd; Rafinejad, Javad; Shahar, Mohd Khadri

2010-08-01

This study assessed the effectiveness of a biorational control approach using 2% hydramethylnon gel bait on German cockroaches, Blattella germanica (L.) in some residential and hospital buildings in South Western Iran. In total, three buildings consisting of 150 apartment units and 101 hospital units were monitored weekly via sticky trap for German cockroach infestations over a period of eight months. These infested units were randomly subjected to intervention and control treatments. Pamphlets and posters were provided and lectures were given to support the educational programmes as a tactic of the biorational system. Survey on cockroach index for intervention units showed 67-94% recovery to achieve clean level of infestation for intervention units of the residential buildings and 83% for the hospital. Mean percentage reductions for treatment groups throughout the 15-week treatment period were 76.8% for the residential buildings and 88.1% for the hospital, showing significant differences compared to the control groups. Linear regression of infestation rates were recorded weekly after treatment and their negative slope for treatment groups substantiated significant reductions for interventions. The results of this study showed that biorational control method, using gel bait, educational programmes and sanitation, is an effective way to manage German cockroach infestation.

Greenridge Multi-Pollutant Control Project Preliminary Public Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connell, Daniel P

2009-01-12

The Greenidge Multi-Pollutant Control Project is being conducted as part of the U.S. Department of Energy's Power Plant Improvement Initiative to demonstrate an innovative combination of air pollution control technologies that can cost-effectively reduce emissions of SO{sub 2}, NO{sub x}, Hg, acid gases (SO{sub 3}, HCl, and HF), and particulate matter from smaller coal-fired electrical generating units (EGUs). The multi-pollutant control system includes a hybrid selective non-catalytic reduction (SNCR)/in-duct selective catalytic reduction (SCR) system to reduce NOx emissions by {ge}60%, followed by a Turbosorp{reg_sign} circulating fluidized bed dry scrubber system to reduce emissions of SO{sub 2}, SO{sub 3}, HCl, andmore » HF by {ge}95%. Mercury removal of {ge}90% is also targeted via the co-benefits afforded by the in-duct SCR, dry scrubber, and baghouse and by injection of activated carbon upstream of the scrubber, as required. The technology is particularly well suited, because of its relatively low capital and maintenance costs and small space requirements, to meet the needs of coal-fired units with capacities of 50-300 MWe. There are about 440 such units in the United States that currently are not equipped with SCR, flue gas desulfurization (FGD), or mercury control systems. These smaller units are a valuable part of the nation's energy infrastructure, constituting about 60 GW of installed capacity. However, with the onset of the Clean Air Interstate Rule, Clean Air Mercury Rule, and various state environmental actions requiring deep reductions in emissions of SO{sub 2}, NO{sub x}, and mercury, the continued operation of these units increasingly depends upon the ability to identify viable air pollution control retrofit options for them. The large capital costs and sizable space requirements associated with conventional technologies such as SCR and wet FGD make these technologies unattractive for many smaller units. The Greenidge Project aims to confirm the commercial readiness of an emissions control system that is specifically designed to meet the environmental compliance requirements of these smaller coal-fired EGUs. The multi-pollutant control system is being installed and tested on the AES Greenidge Unit 4 (Boiler 6) by a team including CONSOL Energy Inc. as prime contractor, AES Greenidge LLC as host site owner, and Babcock Power Environmental Inc. as engineering, procurement, and construction contractor. All funding for the project is being provided by the U.S. Department of Energy, through its National Energy Technology Laboratory, and by AES Greenidge. AES Greenidge Unit 4 is a 107 MW{sub e} (net), 1950s vintage, tangentially-fired, reheat unit that is representative of many of the 440 smaller coal-fired units identified above. Following design and construction, the multi-pollutant control system will be demonstrated over an approximately 20-month period while the unit fires 2-4% sulfur eastern U.S. bituminous coal and co-fires up to 10% biomass. This Preliminary Public Design Report is the first in a series of two reports describing the design of the multi-pollutant control facility that is being demonstrated at AES Greenidge. Its purpose is to consolidate for public use all available nonproprietary design information on the Greenidge Multi-Pollutant Control Project. As such, the report includes a discussion of the process concept, design objectives, design considerations, and uncertainties associated with the multi-pollutant control system and also summarizes the design of major process components and balance of plant considerations for the AES Greenidge Unit 4 installation. The Final Public Design Report, the second report in the series, will update this Preliminary Public Design Report to reflect the final, as-built design of the facility and to incorporate data on capital costs and projected operating costs.« less

Universal Controller for Spacecraft Mechanisms

NASA Technical Reports Server (NTRS)

Levanas, Greg; McCarthy, Thomas; Hunter, Don; Buchanan, Christine; Johnson, Michael; Cozy, Raymond; Morgan, Albert; Tran, Hung

2006-01-01

An electronic control unit has been fabricated and tested that can be replicated as a universal interface between the electronic infrastructure of a spacecraft and a brushless-motor (or other electromechanical actuator) driven mechanism that performs a specific mechanical function within the overall spacecraft system. The unit includes interfaces to a variety of spacecraft sensors, power outputs, and has selectable actuator control parameters making the assembly a mechanism controller. Several control topologies are selectable and reconfigurable at any time. This allows the same actuator to perform different functions during the mission life of the spacecraft. The unit includes complementary metal oxide/semiconductor electronic components on a circuit board of a type called rigid flex (signifying flexible printed wiring along with a rigid substrate). The rigid flex board is folded to make the unit fit into a housing on the back of a motor. The assembly has redundant critical interfaces, allowing the controller to perform time-critical operations when no human interface with the hardware is possible. The controller is designed to function over a wide temperature range without the need for thermal control, including withstanding significant thermal cycling, making it usable in nearly all environments that spacecraft or landers will endure. A prototype has withstood 1,500 thermal cycles between 120 and +85 C without significant deterioration of its packaging or electronic function. Because there is no need for thermal control and the unit is addressed through a serial bus interface, the cabling and other system hardware are substantially reduced in quantity and complexity, with corresponding reductions in overall spacecraft mass and cost.

Pre-production Test Report for Transformer Abort Sensing and Control Unit.

DTIC Science & Technology

The purpose of the report is to describe the test equipment and procedure required for the pre-production testing of a transformer, pressure switch excitation, abort sensing and control unit. (Author)

40 CFR 63.773 - Inspection and monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... devices: (i) Except for control devices for small glycol dehydration units, a boiler or process heater in...) Except for control devices for small glycol dehydration units, a boiler or process heater with a design...

40 CFR 63.773 - Inspection and monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... devices: (i) Except for control devices for small glycol dehydration units, a boiler or process heater in...) Except for control devices for small glycol dehydration units, a boiler or process heater with a design...

Poison control center - emergency number

MedlinePlus

For a POISON EMERGENCY call: 1-800-222-1222 ANYWHERE IN THE UNITED STATES This national hotline number will let you ... is a free and confidential service. All local poison control centers in the United States use this ...

Comparison of competitive exclusion with classical cleaning and disinfection on bacterial load in pig nursery units.

PubMed

Luyckx, K; Millet, S; Van Weyenberg, S; Herman, L; Heyndrickx, M; Dewulf, J; De Reu, K

2016-09-06

Colonisation of the environment of nursery units by pathogenic micro-organisms is an important factor in the persistence and spread of endemic diseases in pigs and zoonotic pathogens. These pathogens are generally controlled by the use of antibiotics and disinfectants. Since an increasing resistance against these measures has been reported in recent years, methods such as competitive exclusion (CE) are promoted as promising alternatives. This study showed that the infection pressure in CE units after microbial cleaning was not reduced to the same degree as in control units. Despite sufficient administration of probiotic-type spores, the analysed bacteria did not decrease in number after 3 production rounds in CE units, indicating no competitive exclusion. In addition, no differences in feed conversion were found between piglets raised in CE and control units in our study. Also, no differences in faecal consistency (indicator for enteric diseases) was noticed. These results indicate that the CE protocol is not a valuable alternative for classical C&D.

Transfusion of irradiated red blood cell units with a potassium adsorption filter: A randomized controlled trial.

PubMed

Cid, Joan; Villegas, Vanessa; Carbassé, Gloria; Alba, Cristina; Perea, Dolores; Lozano, Miguel

2016-05-01

The irradiation of red blood cells (RBCs) causes damage of the RBC membrane with increased potassium (K) leak during storage compared with nonirradiated RBC units of similar age. A previous in vitro study showed a mean reduction of K of 94 ± 5% with a potassium adsorption filter (PAF). A prospective, single-center, nonblinded, randomized controlled trial (RCT) was designed to evaluate the safety and efficacy of transfusing irradiated RBC units with the PAF. Patients 18 years of age or older who received irradiated RBC units due to chemotherapy-induced anemia were randomly assigned to receive irradiated RBC units with the PAF (PAF group) or with the standard blood infusion set (control group). Primary outcome measures were safety and efficacy of the PAF (absolute change in hemoglobin [Hb] and K, respectively, in patient's blood values after transfusing the irradiated RBC units with or without the PAF). A total of 63 irradiated RBC units were transfused to 17 patients in the control group, and a total of 56 irradiated RBC units were transfused to 13 patients in the PAF group. The absolute change of Hb (9.3 ± 6.3 g/L vs. 8.1 ± 5.8 g/L; p = 0.3) and the absolute change of K (-0.01 ± 0.4 mmol/L vs. -0.01 ± 0.3 mmol/L; p = 0.2) were comparable between the two groups of the trial. The transfusion of 1 irradiated RBC unit with the PAF was as safe and efficacious as the transfusion of 1 irradiated RBC unit with the standard blood infusion set in patients with chemotherapy-induced anemia. © 2016 AABB.

Inferential control -- Part 1: Crude unit advanced controls pass accuracy and repeatability tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

San, Y.P.; Landells, K.C.; Mackay, D.C.

1994-11-28

An inferential model is one that provides a quality for which an analyzer is not available. This type of model uses readily available physical measurements -- such as temperatures, pressures, and flow rates -- to infer a quality such as kerosine flash point. The No. 2 crude distillation unit (CDU-2) at Singapore Refining Co. Pte. Ltd.'s Pulau Merlimau refinery has a nominal 130,000 b/d capacity. It produces naphtha, kerosine, diesel, and residue products from a wide range of crude blends. Over the past 12 months, extensive advanced control applications have been implemented on the unit. This first of two articlesmore » will describe the control system and its implementation. The second will outline the project's achievements, including reduced quality giveaway and increased profits. The paper describes background of the company and unit, the process, project implementation, the Infer model, model tuning, closed-loop control, feed rate maximization, and economic monitoring.« less

40 CFR 76.14 - Monitoring, recordkeeping, and reporting.

Code of Federal Regulations, 2011 CFR

2011-07-01

... NOX emission control system to the owner or operator showing that such system was designed to meet the... emission control system that were not included in the design specifications and performance guarantee, but... regard to the following types of Group 1, Phase I units: (i) Units employing no new NOX emission control...

40 CFR 76.14 - Monitoring, recordkeeping, and reporting.

Code of Federal Regulations, 2012 CFR

2012-07-01

... NOX emission control system to the owner or operator showing that such system was designed to meet the... emission control system that were not included in the design specifications and performance guarantee, but... regard to the following types of Group 1, Phase I units: (i) Units employing no new NOX emission control...

40 CFR 76.14 - Monitoring, recordkeeping, and reporting.

Code of Federal Regulations, 2010 CFR

2010-07-01

... NOX emission control system to the owner or operator showing that such system was designed to meet the... emission control system that were not included in the design specifications and performance guarantee, but... regard to the following types of Group 1, Phase I units: (i) Units employing no new NOX emission control...

76 FR 37253 - Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-27

... reports have been received on the elevator power control units (PCUs) where the shaft (tailstock) swaged... power control units (PCUs) where the shaft (tailstock) swaged bearing liners had shown a higher than... and difficulties in aircraft pitch control. This directive mandates a free-play check of the shaft...

76 FR 71470 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-18

... brackets that attach the power control unit (PCU) to the airframe could result in a loss of the rudder actuating system. The loss of both rudder PCU actuators could result in free play of the rudder control... failure of the mounting brackets that attach the power control unit (PCU) to the airframe could result in...

26 CFR 509.106 - Control of a United States enterprise by a Swiss enterprise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 19 2010-04-01 2010-04-01 false Control of a United States enterprise by a Swiss enterprise. 509.106 Section 509.106 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) REGULATIONS UNDER TAX CONVENTIONS SWITZERLAND General Income Tax § 509.106 Control of...

Recruitment of motor units in the medial gastrocnemius muscle during human quiet standing: is recruitment intermittent? What triggers recruitment?

PubMed Central

Loram, Ian D.; Muceli, Silvia; Merletti, Roberto; Farina, Dario

2012-01-01

The recruitment and the rate of discharge of motor units are determinants of muscle force. Within a motoneuron pool, recruitment and rate coding of individual motor units might be controlled independently, depending on the circumstances. In this study, we tested whether, during human quiet standing, the force of the medial gastrocnemius (MG) muscle is predominantly controlled by recruitment or rate coding. If MG control during standing was mainly due to recruitment, then we further asked what the trigger mechanism is. Is it determined internally, or is it related to body kinematics? While seven healthy subjects stood quietly, intramuscular electromyograms were recorded from the MG muscle with three pairs of wire electrodes. The number of active motor units and their mean discharge rate were compared for different sway velocities and positions. Motor unit discharges occurred more frequently when the body swayed faster and forward (Pearson R = 0.63; P < 0.0001). This higher likelihood of observing motor unit potentials was explained chiefly by the recruitment of additional units. During forward body shifts, the median number of units detected increased from 3 to 11 (P < 0.0001), whereas the discharge rate changed from 8 ± 1.1 (mean ± SD) to 10 ± 0.9 pulses/s (P = 0.001). Strikingly, motor units did not discharge continuously throughout standing. They were recruited within individual, forward sways and intermittently, with a modal rate of two recruitments per second. This modal rate is consistent with previous circumstantial evidence relating the control of standing to an intrinsic, higher level planning process. PMID:21994258

Preparation of red blood cell concentrates and plasma units from whole blood held overnight using a hollow-fibre separation system.

PubMed

Johnson, L; Kwok, M; Marks, D C

2015-02-01

The ErySep system represents an alternative to centrifuge-based whole blood (WB) separation, using gravity and filtration through hollow-fibres (0·2 µm pore size) to produce red blood cell (RBC) and plasma components. The aim of this study was to characterise the quality of ErySep RBC and plasma units compared with standard products from WB held overnight. Two ABO-compatible WB units (n = 24) were pooled and split to produce matched products. One of the WB units was separated into components using the ErySep system (ErySep; n = 12), whereas the other units were separated by centrifugation (control; n = 12). RBC units were stored at 2-6 °C and assessed for in vitro quality over 42 days of storage. Plasma was frozen at -30 °C and tested upon thawing. Processing WB with the ErySep system took longer than controls. The ErySep RBC units were of an appropriate volume (307 ± 17 mL) and contained sufficient Hb (50 ± 2 g unit(-1) ). ErySep RBC components contained more microparticles relative to controls at expiry. The plasma volume, total protein, coagulation factor activity (fibrinogen, FV, FVIII) and number of microparticles was lower in the ErySep units compared with controls. Following overnight hold of WB, the ErySep system was capable of producing RBC components that met specifications. However, the ErySep plasma components did not meet quality specifications. © 2015 British Blood Transfusion Society.

Recruitment of motor units in the medial gastrocnemius muscle during human quiet standing: is recruitment intermittent? What triggers recruitment?

PubMed

Vieira, Taian M M; Loram, Ian D; Muceli, Silvia; Merletti, Roberto; Farina, Dario

2012-01-01

The recruitment and the rate of discharge of motor units are determinants of muscle force. Within a motoneuron pool, recruitment and rate coding of individual motor units might be controlled independently, depending on the circumstances. In this study, we tested whether, during human quiet standing, the force of the medial gastrocnemius (MG) muscle is predominantly controlled by recruitment or rate coding. If MG control during standing was mainly due to recruitment, then we further asked what the trigger mechanism is. Is it determined internally, or is it related to body kinematics? While seven healthy subjects stood quietly, intramuscular electromyograms were recorded from the MG muscle with three pairs of wire electrodes. The number of active motor units and their mean discharge rate were compared for different sway velocities and positions. Motor unit discharges occurred more frequently when the body swayed faster and forward (Pearson R = 0.63; P < 0.0001). This higher likelihood of observing motor unit potentials was explained chiefly by the recruitment of additional units. During forward body shifts, the median number of units detected increased from 3 to 11 (P < 0.0001), whereas the discharge rate changed from 8 ± 1.1 (mean ± SD) to 10 ± 0.9 pulses/s (P = 0.001). Strikingly, motor units did not discharge continuously throughout standing. They were recruited within individual, forward sways and intermittently, with a modal rate of two recruitments per second. This modal rate is consistent with previous circumstantial evidence relating the control of standing to an intrinsic, higher level planning process.

7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Plans, elevations, sections, details. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 1 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/28/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

Hardware interface unit for control of shuttle RMS vibrations

NASA Technical Reports Server (NTRS)

Lindsay, Thomas S.; Hansen, Joseph M.; Manouchehri, Davoud; Forouhar, Kamran

1994-01-01

Vibration of the Shuttle Remote Manipulator System (RMS) increases the time for task completion and reduces task safety for manipulator-assisted operations. If the dynamics of the manipulator and the payload can be physically isolated, performance should improve. Rockwell has developed a self contained hardware unit which interfaces between a manipulator arm and payload. The End Point Control Unit (EPCU) is built and is being tested at Rockwell and at the Langley/Marshall Coupled, Multibody Spacecraft Control Research Facility in NASA's Marshall Space Flight Center in Huntsville, Alabama.

56. VIEW OF LAUNCHER FROM SOUTHWEST. NITROGEN CONTROL UNIT ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. VIEW OF LAUNCHER FROM SOUTHWEST. NITROGEN CONTROL UNIT ON RIGHT; UMBILICAL MAST ON LEFT. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Infection control for SARS in a tertiary neonatal centre.

PubMed

Ng, P C; So, K W; Leung, T F; Cheng, F W T; Lyon, D J; Wong, W; Cheung, K L; Fung, K S C; Lee, C H; Li, A M; Hon, K L E; Li, C K; Fok, T F

2003-09-01

The Severe Acute Respiratory Syndrome (SARS) is a newly discovered infectious disease caused by a novel coronavirus, which can readily spread in the healthcare setting. A recent community outbreak in Hong Kong infected a significant number of pregnant women who subsequently required emergency caesarean section for deteriorating maternal condition and respiratory failure. As no neonatal clinician has any experience in looking after these high risk infants, stringent infection control measures for prevention of cross infection between patients and staff are important to safeguard the wellbeing of the work force and to avoid nosocomial spread of SARS within the neonatal unit. This article describes the infection control and patient triage policy of the neonatal unit at the Prince of Wales Hospital, Hong Kong. We hope this information is useful in helping other units to formulate their own infection control plans according to their own unit configuration and clinical needs.

Locomotion of Amorphous Surface Robots

NASA Technical Reports Server (NTRS)

Bradley, Arthur T. (Inventor)

2018-01-01

An amorphous robot includes a compartmented bladder containing fluid, a valve assembly, and an outer layer encapsulating the bladder and valve assembly. The valve assembly draws fluid from a compartment(s) and discharges the drawn fluid into a designated compartment to displace the designated compartment with respect to the surface. Another embodiment includes elements each having a variable property, an outer layer that encapsulates the elements, and a control unit. The control unit energizes a designated element to change its variable property, thereby moving the designated element. The elements may be electromagnetic spheres with a variable polarity or shape memory polymers with changing shape and/or size. Yet another embodiment includes an elongated flexible tube filled with ferrofluid, a moveable electromagnet, an actuator, and a control unit. The control unit energizes the electromagnet and moves the electromagnet via the actuator to magnetize the ferrofluid and lengthen the flexible tube.

Locomotion of Amorphous Surface Robots

NASA Technical Reports Server (NTRS)

Bradley, Arthur T. (Inventor)

2016-01-01

An amorphous robot includes a compartmented bladder containing fluid, a valve assembly, and an outer layer encapsulating the bladder and valve assembly. The valve assembly draws fluid from a compartment(s) and discharges the drawn fluid into a designated compartment to displace the designated compartment with respect to the surface. Another embodiment includes elements each having a variable property, an outer layer that encapsulates the elements, and a control unit. The control unit energizes a designated element to change its variable property, thereby moving the designated element. The elements may be electromagnetic spheres with a variable polarity or shape memory polymers with changing shape and/or size. Yet another embodiment includes an elongated flexible tube filled with ferrofluid, a moveable electromagnet, an actuator, and a control unit. The control unit energizes the electromagnet and moves the electromagnet via the actuator to magnetize the ferrofluid and lengthen the flexible tube.

Locomotion of Amorphous Surface Robots

NASA Technical Reports Server (NTRS)

Bradley, Arthur T. (Inventor)

2014-01-01

An amorphous robot includes a compartmented bladder containing fluid, a valve assembly, and an outer layer encapsulating the bladder and valve assembly. The valve assembly draws fluid from a compartment(s) and discharges the drawn fluid into a designated compartment to displace the designated compartment with respect to the surface. Another embodiment includes elements each having a variable property, an outer layer that encapsulates the elements, and a control unit. The control unit energizes a designated element to change its variable property, thereby moving the designated element. The elements may be electromagnetic spheres with a variable polarity or shape memory polymers with changing shape and/or size. Yet another embodiment includes an elongated flexible tube filled with ferrofluid, a moveable electromagnet, an actuator, and a control unit. The control unit energizes the electromagnet and moves the electromagnet via the actuator to magnetize the ferrofluid and lengthen the flexible tube.

Loss of control air at Browns Ferry Unit One: accident sequence analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrington, R.M.; Hodge, S.A.

1986-04-01

This study describes the predicted response of the Browns Ferry Nuclear Plant to a postulated complete failure of plant control air. The failure of plant control air cascades to include the loss of drywell control air at Units 1 and 2. Nevertheless, this is a benign accident unless compounded by simultaneous failures in the turbine-driven high pressure injection systems. Accident sequence calculations are presented for Loss of Control Air sequences with assumed failure upon demand of the Reactor Core Isolation Cooling (RCIC) and the High Pressure Coolant Injection (HPCI) at Unit 1. Sequences with and without operator action are considered.more » Results show that the operators can prevent core uncovery if they take action to utilize the Control Rod Drive Hydraulic System as a backup high pressure injection system.« less

Research and development of the laser tracker measurement system

NASA Astrophysics Data System (ADS)

Zhang, Z. L.; Zhou, W. H.; Lao, D. B.; Yuan, J.; Dong, D. F. F.; Ji, R. Y. Y.

2013-01-01

The working principle and system design of the laser tracker measurement system are introduced, as well as the key technologies and solutions in the implementation of the system. The design and implementation of the hardware and configuration of the software are mainly researched. The components of the hardware include distance measuring unit, angle measuring unit, tracking and servo control unit and electronic control unit. The distance measuring devices include the relative distance measuring device (IFM) and the absolute distance measuring device (ADM). The main component of the angle measuring device, the precision rotating stage, is mainly comprised of the precision axis and the encoders which are both set in the tracking head. The data processing unit, tracking and control unit and power supply unit are all set in the control box. The software module is comprised of the communication module, calibration and error compensation module, data analysis module, database management module, 3D display module and the man-machine interface module. The prototype of the laser tracker system has been accomplished and experiments have been carried out to verify the proposed strategies of the hardware and software modules. The experiments showed that the IFM distance measuring error is within 0.15mm, the ADM distance measuring error is within 3.5mm and the angle measuring error is within 3" which demonstrates that the preliminary prototype can realize fundamental measurement tasks.

Close-loop performance of a high precision deflectometry controlled deformable mirror (DCDM) unit for wavefront correction in adaptive optics system

NASA Astrophysics Data System (ADS)

Huang, Lei; Zhou, Chenlu; Zhao, Wenchuan; Choi, Heejoo; Graves, Logan; Kim, Daewook

2017-06-01

We present a high precision deflectometry system (DS) controlled deformable mirror (DM) solution for optical system. Different from wavefront and non-wavefront system, the DS and the DM are set to be an individual integrated DCDM unit and can be installed in one base plate. In the DCDM unit, the DS can directly provide the influence functions and surface shape of the DM to the industrial computer in any adaptive optics system. As an integrated adaptive unit, the DCDM unit could be put into various optical systems to realize aberration compensation. In this paper, the configuration and principle of the DCDM unit is introduced first. Theoretical simulation on the close-loop performance of the DCDM unit is carried out. Finally, a verification experiment is proposed to verify the compensation capability of the DCDM unit.

31 CFR 596.313 - United States person.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States person. 596.313 Section... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.313 United States person. The term United States person means any United States...

Short-pulse controlled optical switch using external cavity based single mode Fabry-Pérot laser diode.

PubMed

Nakarmi, Bikash; Hoai, Tran Quoc; Won, Yong-Hyub; Zhang, Xuping

2014-06-30

We propose and demonstrate a novel scheme for short pulse controlled all-optical switch using external cavity based single mode Fabry- Pérot laser diode (SMFP-LD). The proposed scheme consists of control unit and switching unit as two essential blocks. The basic principle of the proposed scheme is the optical bistability property of SMFP-LD for the control unit and the suppression of the dominant beam of SMFP-LD with injection locking for the switching unit. We also present the analysis of hysteresis width and rising/falling time with change in wavelength detuning which helps to find the optimum wavelength detuning value and power of light beams at different stages of the proposed scheme that gives wide input dynamic power range, high ON/OFF contrast ratio, and low rising/falling time. Input data of 10 Gb/s Non Return to Zero (NRZ) signal is switched at output ports depending upon the control signal generated by the control unit, which comprises of optical SR latch. Output waveforms, clear eye diagrams with extinction ratio of about 11 dB, rising/falling time of about 30 ps and 40 ps, and bit error rate (BER) are measured to validate proposed scheme. No noise floor is observed at output ports up to BER of 10-(12) and the maximum power penalty recorded is about 1.7 dB at a BER of 10-(9) which shows good performance of the proposed short pulse controlled optical switch using SMFP-LDs.

Prosthetic urinary sphincter

NASA Technical Reports Server (NTRS)

Helms, C. R.; Smyly, H. M. (Inventor)

1981-01-01

A pump/valve unit for controlling the inflation and deflation of a urethral collar in a prosthetic urinary sphincter device is described. A compressible bulb pump defining a reservoir was integrated with a valve unit for implantation. The valve unit includes a movable valve member operable by depression of a flexible portion of the valve unit housing for controlling fluid flow between the reservoir and collar; and a pressure sensing means which operates the valve member to relieve an excess pressure in the collar should too much pressure be applied by the patient.

21 CFR 203.38 - Sample lot or control numbers; labeling of sample units.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Sample lot or control numbers; labeling of sample units. 203.38 Section 203.38 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL PRESCRIPTION DRUG MARKETING Samples § 203.38 Sample lot or control...

Engine Tune-up Service. Unit 6: Emission Control Systems. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Morse, David T.; May, Theodore R.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the posttests is inspecting, testing, and servicing emission control systems. One multiple choice posttest is provided that covers the seven performance objectives contained in…

Troubleshooting of an Electromechanical System (Westinghouse PLC Controlling a Pneumatic Robot). High-Technology Training Module.

ERIC Educational Resources Information Center

Tucker, James D.

This training module on the troubleshooting of an electromechanical system, The Westinghouse Programmable Logic Controller (PLC) controlling a pneumatic robot, is used for a troubleshooting unit in an electromechanical systems/robotics and automation systems course. In this unit, students locate and repair a defect in a PLC-operated machine. The…

78 FR 42491 - Aluminum Extrusions from the People's Republic of China: Notice of Court Decision Not in Harmony...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-16

...'') imported by Valeo, Inc., Valeo Engine Cooling Inc., and Valeo Climate Control Corp. (collectively, ``Valeo..., Inc., and Valeo Climate Control Corp. v. United States, Court No. 12-00381 (CIT February 13, 2013).\\2... Remand, Valeo, Inc., Valeo Engine Cooling, Inc., and Valeo Climate Control Corp. v. United States, Court...

40 CFR 63.1575 - What reports must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... cracking units that are served by a single wet scrubber emission control device (e.g., a Venturi scrubber... requirements applicable to the unit that is operating and the wet scrubber emission control device do not apply...

28. Credit JTL. Overview of unit 5 (installed 1908) showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Credit JTL. Overview of unit 5 (installed 1908) showing exciter, generator, deflector motor, needle valve control, impulse wheel housing, and gate valve controls. - Battle Creek Hydroelectric System, Battle Creek & Tributaries, Red Bluff, Tehama County, CA

Computer Controlled Microwave Oven System for Rapid Water Content Determination

DTIC Science & Technology

1988-11-01

Codes - .d/or CONTENTS Page PREFACE .................................................................... 1 CONVERSION FACTORS, NON- SI TO SI (METRIC...CONVERSION FACTORS, NON- SI TO SI (METRIC) UNITS OF MEASUREMENT Non- SI units of measurement used in this report can be converted to SI (metric) units as...formula: C = (5/9)(F - 32) . To obtain Kelvin ( K ) readings, use: K = (5/9)(F - 32) + 273.15 3 COMPUTER CONTROLLED MICROWAVE OVEN SYSTEM FOR RAPID WATER

Antenna unit and radio base station therewith

DOEpatents

Kuwahara, Mikio; Doi, Nobukazu; Suzuki, Toshiro; Ishida, Yuji; Inoue, Takashi; Niida, Sumaru

2007-04-10

Phase and amplitude deviations, which are generated, for example, by cables connecting an array antenna of a CDMA base station and the base station, are calibrated in the baseband. The base station comprises: an antenna apparatus 1; couplers 2; an RF unit 3 that converts a receive signal to a baseband signal, converts a transmit signal to a radio frequency, and performs power control; an A/D converter 4 for converting a receive signal to a digital signal; a receive beam form unit 6 that multiplies the receive signal by semi-fixed weight; a despreader 7 for this signal input; a time-space demodulator 8 for demodulating user data; a despreader 9 for probe signal; a space modulator 14 for user data; a spreader 13 for user signal; a channel combiner 12; a Tx calibrater 11 for controlling calibration of a signal; a D/A converter 10; a unit 16 for calculation of correlation matrix for generating a probe signal used for controlling an Rx calibration system and a TX calibration system; a spreader 17 for probe signal; a power control unit 18; a D/A converter 19; an RF unit 20 for probe signal; an A/D converter 21 for signal from the couplers 2; and a despreader 22.

Advanced I&C for Fault-Tolerant Supervisory Control of Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Daniel G.

In this research, we have developed a supervisory control approach to enable automated control of SMRs. By design the supervisory control system has an hierarchical, interconnected, adaptive control architecture. A considerable advantage to this architecture is that it allows subsystems to communicate at different/finer granularity, facilitates monitoring of process at the modular and plant levels, and enables supervisory control. We have investigated the deployment of automation, monitoring, and data collection technologies to enable operation of multiple SMRs. Each unit's controller collects and transfers information from local loops and optimize that unit’s parameters. Information is passed from the each SMR unitmore » controller to the supervisory controller, which supervises the actions of SMR units and manage plant processes. The information processed at the supervisory level will provide operators the necessary information needed for reactor, unit, and plant operation. In conjunction with the supervisory effort, we have investigated techniques for fault-tolerant networks, over which information is transmitted between local loops and the supervisory controller to maintain a safe level of operational normalcy in the presence of anomalies. The fault-tolerance of the supervisory control architecture, the network that supports it, and the impact of fault-tolerance on multi-unit SMR plant control has been a second focus of this research. To this end, we have investigated the deployment of advanced automation, monitoring, and data collection and communications technologies to enable operation of multiple SMRs. We have created a fault-tolerant multi-unit SMR supervisory controller that collects and transfers information from local loops, supervise their actions, and adaptively optimize the controller parameters. The goal of this research has been to develop the methodologies and procedures for fault-tolerant supervisory control of small modular reactors. To achieve this goal, we have identified the following objectives. These objective are an ordered approach to the research: I) Development of a supervisory digital I&C system II) Fault-tolerance of the supervisory control architecture III) Automated decision making and online monitoring.« less

40 CFR 62.14575 - What must I do if I close my CISWI unit and then restart it?

Code of Federal Regulations, 2010 CFR

2010-07-01

... retrofit construction of control devices so that when the affected CISWI unit is brought online, all necessary process changes and air pollution control devices operate as designed. Waste Management Plan ...

C-A4-01: Computerized Clinical Decision Support During Drug Ordering for Long-term Care Residents With Renal Insufficiency

PubMed Central

Field, Terry S; Rochon, Paula; Lee, Monica; Gavendo, Linda; Baril, Joann L; Gurwitz, Jerry H

2010-01-01

Objective: To determine whether a computerized clinical decision support system (CDSS) providing patient specific recommendations in real- time improves the quality of prescribing for long-term care residents with renal insufficiency. Design: A randomized trial within the long-stay units of a large long-term care facility. Randomization was within blocks by unit type. Alerts related to medication prescribing for residents with renal insufficiency were displayed to prescribers in the intervention units and hidden but tracked in control units. Measurement: The proportions of final drug orders that were appropriate were compared between intervention and control units within alert categories: recommended medication doses; recommended administration frequencies; recommendations to avoid the drug; 4) warnings of missing information. Results: The rates of alerts were nearly equal in the intervention and control units: 2.5 per 1000 resident days in the intervention units and 2.4 in the control units. The proportions of dose alerts for which the final drug orders were appropriate were similar between the intervention and control units (relative risk 0.95, 95% confidence interval 0.83, 1.1). For the remaining alert categories significantly higher proportions of final drug orders were appropriate in the intervention units: relative risk 2.4 for maximum frequency (1.4, 4.4); 2.6 for drugs that should be avoided (1.4, 5.0); and 1.8 for alerts to acquire missing information (1.1, 3.4). Overall, final drug orders were appropriate significantly more often than a relative risk 1.2 (1.0, 1.4). By tracking personnel time and expenditures, we estimated the cost of developing the CDSS as $48,668.57. Drug costs saved during the 12 months of the trial are estimated at $2,137. Conclusion: Clinical decision support for physicians prescribing medications for long-term care residents with renal insufficiency can improve the quality of prescribing decisions. However, patient well-being and quality of care rather than the business case related to cost savings are likely to be the key drivers for adoption of this HIT application.

Actuator digital interface unit (AIU). [control units for space shuttle data system

NASA Technical Reports Server (NTRS)

1973-01-01

Alternate versions of the actuator interface unit are presented. One alternate is a dual-failure immune configuration which feeds a look-and-switch dual-failure immune hydraulic system. The other alternate is a single-failure immune configuration which feeds a majority voting hydraulic system. Both systems communicate with the data bus through data terminals dedicated to each user subsystem. Both operational control data and configuration control information are processed in and out of the subsystem via the data terminal which yields the actuator interface subsystem, self-managing within its failure immunity capability.

Development of Protection and Control Unit for Distribution Substation

NASA Astrophysics Data System (ADS)

Iguchi, Fumiaki; Hayashi, Hideyuki; Takeuchi, Motohiro; Kido, Mitsuyasu; Kobayashi, Takashi; Yanaoka, Atsushi

The Recently, electronics and IT technologies have been rapidly innovated and have been introduced to power system protection & control system to achieve high reliability, maintainability and more functionality. Concerning the distribution substation application, digital relays have been applied for more than 10 years. Because of a number of electronic devices used for it, product cost becomes higher. Also, products installed during the past high-growth period will be at the end of lifetime and will be replaced. Therefore, replacing market is expected to grow and the reduction of cost is demanded. Considering above mentioned background, second generation digital protection and control unit as a successor is designed to have following concepts. Functional integration based on advanced digital technologies, Ethernet LAN based indoor communication network, cost reduction and downsizing. Pondering above concepts, integration of protection and control function is adopted in contrary to the functional segregation applied to the previous system in order to achieve one-unit concept. Also the adoption of Ethernet LAN for inter-unit communication is objective. This report shows the development of second-generation digital relay for distribution substation, which is equipped with control function and Ethernet LAN by reducing the size of auxiliary transformer unit and the same size as previous product is realized.

A randomized controlled trial oftransfusion-related acute lung injury: is plasma from multiparous blood donors dangerous?

PubMed

Palfi, M; Berg, S; Ernerudh, J; Berlin, G

2001-03-01

Transfusion-related acute lung injury (TRALI) and other posttransfusion reactions may be caused by granulocyte and/or HLA antibodies, which are often present in blood from multiparous donors. The purpose of this study was to compare the effects of plasma from multiparous donors with those of plasma from donors with no history of transfusion or pregnancy (control plasma) in a prospective, randomized, double-blind, crossover study. Intensive care patients, judged to need at least 2 units of plasma, were randomly assigned to receive a unit of control plasma and, 4 hours later, a plasma unit from a multiparous donor (> or = 3 live births) or to receive the plasma units in opposite order. The patients were closely monitored, and body temperature, blood pressure, and heart rate were recorded. Blood samples for analysis of blood gases, TNFalpha, IL-1 receptor antagonist, soluble E selectin, and C3d complement factor were collected at least on four occasions (before and after the transfusion of each unit). Transfusion of plasma from multiparous donors was associated with significantly lower oxygen saturation and higher TNFalpha concentrations than transfusion of control plasma. The mean arterial pressure increased significantly after the transfusion of control plasma, whereas plasma from multiparous donors had no effect on it. Five posttransfusion reactions were observed in 100 patients, in four cases after the transfusion of plasma from multiparous donors. Plasma from multiparous blood donors may impair pulmonary function in intensive care unit patients.

Nonlinear adaptive control of grid-connected three-phase inverters for renewable energy applications

NASA Astrophysics Data System (ADS)

Mahdian-Dehkordi, N.; Namvar, M.; Karimi, H.; Piya, P.; Karimi-Ghartemani, M.

2017-01-01

Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters' changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the proposed controller offers smoother transient responses, and lower level of current distortions. The Lyapunov approach is used to establish global asymptotic stability of the proposed control system. Linearisation technique is employed to develop guidelines for parameters tuning of the controller. Extensive time-domain digital simulations are performed and presented to verify the performance of the proposed controller when employed in a VSC to control the operation of a two-stage DG unit and also that of a single-stage solar photovoltaic system. Desirable and superior performance of the proposed controller is observed.

Engine Tune-up Service. Unit 6: Emission Control Systems. Review Exercise Book. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the exercises and pretests is inspecting, testing, and servicing emission control systems. Pretests and performance checklists are provided for each of the…

The Role of Parents' Control in Early Adolescents' Psychological Functioning: A Longitudinal Investigation in the United States and China

ERIC Educational Resources Information Center

Wang, Qian; Pomerantz, Eva M.; Chen, Huichang

2007-01-01

This research compared the effects over time of parents' control and autonomy support on children's functioning in the United States and China. American and Chinese (N = 806) seventh graders (mean age = 12.73 years) participated in a 6-month longitudinal study. Children reported on their parents' psychological control, psychological autonomy…

40 CFR 96.387 - Change in regulatory status.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Season unit) under § 96.342 for the control period multiplied by; (B) The ratio of the number of days, in... the same or a prior control period as: (A) Any CAIR NOX Ozone Season allowances allocated to the CAIR NOX Ozone Season opt-in unit under § 96.388 for any control period after the date on which the CAIR...

Assessing the influence of component processing and donor characteristics on quality of red cell concentrates using quality control data.

PubMed

Jordan, A; Chen, D; Yi, Q-L; Kanias, T; Gladwin, M T; Acker, J P

2016-07-01

Quality control (QC) data collected by blood services are used to monitor production and to ensure compliance with regulatory standards. We demonstrate how analysis of quality control data can be used to highlight the sources of variability within red cell concentrates (RCCs). We merged Canadian Blood Services QC data with manufacturing and donor records for 28 227 RCC between June 2011 and October 2014. Units were categorized based on processing method, bag manufacturer, donor age and donor sex, then assessed based on product characteristics: haemolysis and haemoglobin levels, unit volume, leucocyte count and haematocrit. Buffy-coat method (top/bottom)-processed units exhibited lower haemolysis than units processed using the whole-blood filtration method (top/top). Units from female donors exhibited lower haemolysis than male donations. Processing method influenced unit volume and the ratio of additive solution to residual plasma. Stored red blood cell characteristics are influenced by prestorage processing and donor factors. Understanding the relationship between processing, donors and RCC quality will help blood services to ensure the safety of transfused products. © 2016 International Society of Blood Transfusion.

Statistical transformation and the interpretation of inpatient glucose control data from the intensive care unit.

PubMed

Saulnier, George E; Castro, Janna C; Cook, Curtiss B

2014-05-01

Glucose control can be problematic in critically ill patients. We evaluated the impact of statistical transformation on interpretation of intensive care unit inpatient glucose control data. Point-of-care blood glucose (POC-BG) data derived from patients in the intensive care unit for 2011 was obtained. Box-Cox transformation of POC-BG measurements was performed, and distribution of data was determined before and after transformation. Different data subsets were used to establish statistical upper and lower control limits. Exponentially weighted moving average (EWMA) control charts constructed from April, October, and November data determined whether out-of-control events could be identified differently in transformed versus nontransformed data. A total of 8679 POC-BG values were analyzed. POC-BG distributions in nontransformed data were skewed but approached normality after transformation. EWMA control charts revealed differences in projected detection of out-of-control events. In April, an out-of-control process resulting in the lower control limit being exceeded was identified at sample 116 in nontransformed data but not in transformed data. October transformed data detected an out-of-control process exceeding the upper control limit at sample 27 that was not detected in nontransformed data. Nontransformed November results remained in control, but transformation identified an out-of-control event less than 10 samples into the observation period. Using statistical methods to assess population-based glucose control in the intensive care unit could alter conclusions about the effectiveness of care processes for managing hyperglycemia. Further study is required to determine whether transformed versus nontransformed data change clinical decisions about the interpretation of care or intervention results. © 2014 Diabetes Technology Society.

Statistical Transformation and the Interpretation of Inpatient Glucose Control Data From the Intensive Care Unit

PubMed Central

Saulnier, George E.; Castro, Janna C.

2014-01-01

Glucose control can be problematic in critically ill patients. We evaluated the impact of statistical transformation on interpretation of intensive care unit inpatient glucose control data. Point-of-care blood glucose (POC-BG) data derived from patients in the intensive care unit for 2011 was obtained. Box–Cox transformation of POC-BG measurements was performed, and distribution of data was determined before and after transformation. Different data subsets were used to establish statistical upper and lower control limits. Exponentially weighted moving average (EWMA) control charts constructed from April, October, and November data determined whether out-of-control events could be identified differently in transformed versus nontransformed data. A total of 8679 POC-BG values were analyzed. POC-BG distributions in nontransformed data were skewed but approached normality after transformation. EWMA control charts revealed differences in projected detection of out-of-control events. In April, an out-of-control process resulting in the lower control limit being exceeded was identified at sample 116 in nontransformed data but not in transformed data. October transformed data detected an out-of-control process exceeding the upper control limit at sample 27 that was not detected in nontransformed data. Nontransformed November results remained in control, but transformation identified an out-of-control event less than 10 samples into the observation period. Using statistical methods to assess population-based glucose control in the intensive care unit could alter conclusions about the effectiveness of care processes for managing hyperglycemia. Further study is required to determine whether transformed versus nontransformed data change clinical decisions about the interpretation of care or intervention results. PMID:24876620

Charge-Control Unit for Testing Lithium-Ion Cells

NASA Technical Reports Server (NTRS)

Reid, Concha M.; Mazo, Michelle A.; Button, Robert M.

2008-01-01

A charge-control unit was developed as part of a program to validate Li-ion cells packaged together in batteries for aerospace use. The lithium-ion cell charge-control unit will be useful to anyone who performs testing of battery cells for aerospace and non-aerospace uses and to anyone who manufacturers battery test equipment. This technology reduces the quantity of costly power supplies and independent channels that are needed for test programs in which multiple cells are tested. Battery test equipment manufacturers can integrate the technology into their battery test equipment as a method to manage charging of multiple cells in series. The unit manages a complex scheme that is required for charging Li-ion cells electrically connected in series. The unit makes it possible to evaluate cells together as a pack using a single primary test channel, while also making it possible to charge each cell individually. Hence, inherent cell-to-cell variations in a series string of cells can be addressed, and yet the cost of testing is reduced substantially below the cost of testing each cell as a separate entity. The unit consists of electronic circuits and thermal-management devices housed in a common package. It also includes isolated annunciators to signal when the cells are being actively bypassed. These annunciators can be used by external charge managers or can be connected in series to signal that all cells have reached maximum charge. The charge-control circuitry for each cell amounts to regulator circuitry and is powered by that cell, eliminating the need for an external power source or controller. A 110-VAC source of electricity is required to power the thermal-management portion of the unit. A small direct-current source can be used to supply power for an annunciator signal, if desired.

Effect of pain on the modulation in discharge rate of sternocleidomastoid motor units with force direction.

PubMed

Falla, Deborah; Lindstrøm, Rene; Rechter, Lotte; Farina, Dario

2010-05-01

To compare the behavior of sternocleidomastoid motor units of patients with chronic neck pain and healthy controls. Nine women (age, 40.4+/-3.5 yr) with chronic neck pain and nine age- and gender-matched healthy controls participated. Surface and intramuscular EMG were recorded from the sternocleidomastoid muscle bilaterally as subjects performed isometric contractions of 10-s duration in the horizontal plane at a force of 15 N in eight directions (0-360 degrees ; 45 degrees intervals) and isometric contractions at 15 and 30 N force with continuous change in force direction in the range 0-360 degrees . Motor unit behavior was monitored during the 10-s contractions and the subsequent resting periods. The mean motor unit discharge rate depended on the direction of force in the control subjects (P<0.05) but not in the patients. Moreover, in three of the nine patients, but in none of the controls, single motor unit activity continued for 8.1+/-6.1s upon completion of the contraction. The surface EMG amplitude during the circular contraction at 15N was greater for the patients (43.5+/-54.2 microV) compared to controls (16.9+/-14.9 microV; P<0.05). The modulation in discharge rate of individual motor units with force direction is reduced in the sternocleidomastoid muscle in patients with neck pain, with some patients showing prolonged motor unit activity when they were instructed to rest. These observations suggest that chronic neck pain affects the change in neural drive to muscles with force direction. Copyright 2009 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Turbine Powered Simulator Calibration and Testing for Hybrid Wing Body Powered Airframe Integration

NASA Technical Reports Server (NTRS)

Shea, Patrick R.; Flamm, Jeffrey D.; Long, Kurtis R.; James, Kevin D.; Tompkins, Daniel M.; Beyar, Michael D.

2016-01-01

Propulsion airframe integration testing on a 5.75% scale hybrid wing body model us- ing turbine powered simulators was completed at the National Full-Scale Aerodynamics Complex 40- by 80-foot test section. Four rear control surface con gurations including a no control surface de ection con guration were tested with the turbine powered simulator units to investigate how the jet exhaust in uenced the control surface performance as re- lated to the resultant forces and moments on the model. Compared to ow-through nacelle testing on the same hybrid wing body model, the control surface e ectiveness was found to increase with the turbine powered simulator units operating. This was true for pitching moment, lift, and drag although pitching moment was the parameter of greatest interest for this project. With the turbine powered simulator units operating, the model pitching moment was seen to increase when compared to the ow-through nacelle con guration indicating that the center elevon and vertical tail control authority increased with the jet exhaust from the turbine powered simulator units.

78 FR 45842 - Airworthiness Directives; CFM International, S. A. Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

... of the delta-P valve in the hydro-mechanical unit (HMU) fuel control caused by exposure to type TS-1... hydro- mechanical unit (HMU) fuel control part numbers (P/Ns) in paragraphs (c)(1) and (c)(2) of this AD...

MANIPULATOR FOR SLAVE ROBOT

DOEpatents

Goertz, R.C.; Grimson, J.H.; Kohut, F.A.

1961-04-01

A remote-control manipulator comprising two stationary master units, two slave units on a movable vehicle, and electrical connections between the master and slave units is reported. The slave units are side by side with a minimum over-all width, which is made feasible by an arrangement of transducers producing most movements of each slave unit to one side of the support of said slave unit.

Design of a microprocessor-based Control, Interface and Monitoring (CIM unit for turbine engine controls research

NASA Technical Reports Server (NTRS)

Delaat, J. C.; Soeder, J. F.

1983-01-01

High speed minicomputers were used in the past to implement advanced digital control algorithms for turbine engines. These minicomputers are typically large and expensive. It is desirable for a number of reasons to use microprocessor-based systems for future controls research. They are relatively compact, inexpensive, and are representative of the hardware that would be used for actual engine-mounted controls. The Control, Interface, and Monitoring Unit (CIM) contains a microprocessor-based controls computer, necessary interface hardware and a system to monitor while it is running an engine. It is presently being used to evaluate an advanced turbofan engine control algorithm.

Unit bias. A new heuristic that helps explain the effect of portion size on food intake.

PubMed

Geier, Andrew B; Rozin, Paul; Doros, Gheorghe

2006-06-01

People seem to think that a unit of some entity (with certain constraints) is the appropriate and optimal amount. We refer to this heuristic as unit bias. We illustrate unit bias by demonstrating large effects of unit segmentation, a form of portion control, on food intake. Thus, people choose, and presumably eat, much greater weights of Tootsie Rolls and pretzels when offered a large as opposed to a small unit size (and given the option of taking as many units as they choose at no monetary cost). Additionally, they consume substantially more M&M's when the candies are offered with a large as opposed to a small spoon (again with no limits as to the number of spoonfuls to be taken). We propose that unit bias explains why small portion sizes are effective in controlling consumption; in some cases, people served small portions would simply eat additional portions if it were not for unit bias. We argue that unit bias is a general feature in human choice and discuss possible origins of this bias, including consumption norms.

40 CFR 63.1281 - Control equipment requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... dehydration unit baseline operations (as defined in § 63.1271). Records of glycol dehydration unit baseline... the Administrator's satisfaction, the conditions for which glycol dehydration unit baseline operations... emission reduction of 95.0 percent for the glycol dehydration unit process vent. Only modifications in...

40 CFR 63.1281 - Control equipment requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... dehydration unit baseline operations (as defined in § 63.1271). Records of glycol dehydration unit baseline... the Administrator's satisfaction, the conditions for which glycol dehydration unit baseline operations... emission reduction of 95.0 percent for the glycol dehydration unit process vent. Only modifications in...

Decentralizing Centralized Control: Reorienting a Fundamental Tenet for Resilient Air Operation

DTIC Science & Technology

2008-05-22

Forward Air Controller FBIS Foreign Broadcast Information Service FCC Functional Component Commander FM Field Manual GBU - 39 Guided Bomb Unit - 39...Diameter Bomb ( GBU - 39 ) TEG Test and Evaluation Group TST Time Sensitive Target UAV Unmanned Aerial Vehicle USAF United States Air Force USAFWS United...www.afmc.af.mil/news/story.asp?id=123017916 (accessed November 11, 2007). Recent fielding of the GBU - 39 , Small Diameter Bomb (SDB), enables a

Automatic insulation resistance testing apparatus

DOEpatents

Wyant, Francis J.; Nowlen, Steven P.; Luker, Spencer M.

2005-06-14

An apparatus and method for automatic measurement of insulation resistances of a multi-conductor cable. In one embodiment of the invention, the apparatus comprises a power supply source, an input measuring means, an output measuring means, a plurality of input relay controlled contacts, a plurality of output relay controlled contacts, a relay controller and a computer. In another embodiment of the invention the apparatus comprises a power supply source, an input measuring means, an output measuring means, an input switching unit, an output switching unit and a control unit/data logger. Embodiments of the apparatus of the invention may also incorporate cable fire testing means. The apparatus and methods of the present invention use either voltage or current for input and output measured variables.

Architecture and data processing alternatives for Tse computer. Volume 1: Tse logic design concepts and the development of image processing machine architectures

NASA Technical Reports Server (NTRS)

Rickard, D. A.; Bodenheimer, R. E.

1976-01-01

Digital computer components which perform two dimensional array logic operations (Tse logic) on binary data arrays are described. The properties of Golay transforms which make them useful in image processing are reviewed, and several architectures for Golay transform processors are presented with emphasis on the skeletonizing algorithm. Conventional logic control units developed for the Golay transform processors are described. One is a unique microprogrammable control unit that uses a microprocessor to control the Tse computer. The remaining control units are based on programmable logic arrays. Performance criteria are established and utilized to compare the various Golay transform machines developed. A critique of Tse logic is presented, and recommendations for additional research are included.

Accreditation of specialized asthma units for adults in Spain: an applicable experience for the management of difficult-to-control asthma

PubMed Central

Cisneros, Carolina; Díaz-Campos, Rocío Magdalena; Marina, Núria; Melero, Carlos; Padilla, Alicia; Pascual, Silvia; Pinedo, Celia; Trisán, Andrea

2017-01-01

This paper, developed by consensus of staff physicians of accredited asthma units for the management of severe asthma, presents information on the process and requirements for already-existing asthma units to achieve official accreditation by the Spanish Society of Pneumology and Thoracic Surgery (SEPAR). Three levels of specialized asthma care have been established based on available resources, which include specialized units for highly complex asthma, specialized asthma units, and basic asthma units. Regardless of the level of accreditation obtained, the distinction of “excellence” could be granted when more requirements in the areas of provision of care, technical and human resources, training in asthma, and teaching and research activities were met at each level. The Spanish experience in the process of accreditation of specialized asthma units, particularly for the care of patients with difficult-to-control asthma, may be applicable to other health care settings. PMID:28533690

Urine output on an intensive care unit: case-control study.

PubMed

Solomon, Anthony W; Kirwan, Christopher J; Alexander, Neal D E; Nimako, Kofi; Jurukov, Angela; Forth, Rebecca J; Rahman, Tony M

2010-12-14

To compare urine output between junior doctors in an intensive care unit and the patients for whom they are responsible. Case-control study. General intensive care unit in a tertiary referral hospital. 18 junior doctors responsible for clerking patients on weekday day shifts in the unit from 23 March to 23 April 2009 volunteered as "cases." Controls were the patients in the unit clerked by those doctors. Exclusion criteria (for both groups) were pregnancy, baseline estimated glomerular filtration rate <15 ml/min/1.73 m(2), and renal replacement therapy. Oliguria (defined as mean urine output <0.5 ml/kg/hour over six or more hours of measurement) and urine output (in ml/kg/hour) as a continuous variable. Doctors were classed as oliguric and "at risk" of acute kidney injury on 19 (22%) of 87 shifts in which urine output was measured, and oliguric to the point of being "in injury" on one (1%) further shift. Data were available for 208 of 209 controls matched to cases in the data collection period; 13 of these were excluded because the control was receiving renal replacement therapy. Doctors were more likely to be oliguric than their patients (odds ratio 1.99, 95% confidence interval 1.08 to 3.68, P=0.03). For each additional 1 ml/kg/hour mean urine output, the odds ratio for being a case rather than a control was 0.27 (0.12 to 0.58, P=0.001). Mortality among doctors was astonishingly low, at 0% (0% to 18%). Managing our own fluid balance is more difficult than managing it in our patients. We should drink more water. Modifications to the criteria for acute kidney injury could be needed for the assessment of junior doctors in an intensive care unit.

Stress among nurses working in emergency, anesthesiology and intensive care units depends on qualification: a Job Demand-Control survey.

PubMed

Trousselard, Marion; Dutheil, Frédéric; Naughton, Geraldine; Cosserant, Sylvie; Amadon, Sylvie; Dualé, Christian; Schoeffler, Pierre

2016-02-01

The nurse stress literature reports an overwhelming culture of acceptance and expectation of work stressors, ironically linked to the control of the workplace to effectively and proactively manage stress. The stressors involved in delivering "stress management" have been well studied in nursing-related workplaces, especially in acute care settings in accordance with the Karasek Job Demand-Control-Support (JDCS) model. However, little is known about the effects of specificity of an acute care unit and the level of qualifications on stress experienced by nurses. A survey using the JDCS model was conducted among 385 nurses working in three different acute care units (anesthesiology, emergency and intensive care unit) from a university hospital. Specific questions explored variables such as gender, acute care units, level of qualification and working experience. Two hundred questionnaires were returned. A high level of job strain was highlighted without a gender effect and in the absence of isostrain. Nurses from acute care units were located in the high stress quadrant of the JDCS model. Conversely, other nurses were commonly located in the "active" quadrant. Independent of acute care settings, the highest level of education was associated with the highest job strain and the lowest level of control. In an acute care setting, a high level of education was a key factor for high job stress and was associated with a perception of a low control in the workplace, both of which may be predictors of adverse mental health. In particular, the lack of control has been associated with moral distress, a frequently reported characteristic of acute care settings. To enhance the personal and professional outcomes of the advanced registered nurses, strategies for supporting nurses manage daily stressors in acute care are urgently required.

Global Radius of Curvature Estimation and Control System for Segmented Mirrors

NASA Technical Reports Server (NTRS)

Rakoczy, John M. (Inventor)

2006-01-01

An apparatus controls positions of plural mirror segments in a segmented mirror with an edge sensor system and a controller. Current mirror segment edge sensor measurements and edge sensor reference measurements are compared with calculated edge sensor bias measurements representing a global radius of curvature. Accumulated prior actuator commands output from an edge sensor control unit are combined with an estimator matrix to form the edge sensor bias measurements. An optimal control matrix unit then accumulates the plurality of edge sensor error signals calculated by the summation unit and outputs the corresponding plurality of actuator commands. The plural mirror actuators respond to the actuator commands by moving respective positions of the mixor segments. A predetermined number of boundary conditions, corresponding to a plurality of hexagonal mirror locations, are removed to afford mathematical matrix calculation.

Electric auxiliary power unit for Shuttle evolution

NASA Technical Reports Server (NTRS)

Meyer, Doug; Weber, Kent; Scott, Walter

1989-01-01

The Space Shuttle Orbiter currently uses three hydrazine fueled auxiliary power units (APUs) to provide hydraulic power for the vehicle aerodynamic surface controls, main engine thrust vector control, landing gear, steering, and brakes. Electric auxiliary power units have been proposed as possible replacements to the hydrazine auxiliary power units. Along with the potential advantages, this paper describes an Electric APU configuration and addresses the technical issues and risks associated with the subsystem components. Additionally, characteristics of an Electric APU compared to the existing APU and the direction of future study with respect to the Electric APU is suggested.

Peak expiratory flow rate of children working in lock factories.

PubMed

Singhal, S; Singhal, A; Singh, P N; Agarwal, D K; Gulati, R

2006-01-01

Peak expiratory flow rate (PEFR) of 106 children working in different units of lock factory was measured and compared with age and sex matched control group of same socio-economic status children. All the children worked for about ten hours per day. It was observed that there was a significant decrease in PEFR of children working in the different units of lock factories i.e. Hand press, Polishing, Lock fitting, Lock packing units as compared to control group (P>0.001). The reduction percentage of PEFR was maximum in children working in polishing unit (25.48%).

Modified high-intensity interval training reduces liver fat and improves cardiac function in non-alcoholic fatty liver disease: a randomized controlled trial.

PubMed

Hallsworth, Kate; Thoma, Christian; Hollingsworth, Kieren G; Cassidy, Sophie; Anstee, Quentin M; Day, Christopher P; Trenell, Michael I

2015-12-01

Although lifestyle changes encompassing weight loss and exercise remain the cornerstone of non-alcoholic fatty liver disease (NAFLD) management, the effect of different types of exercise on NAFLD is unknown. This study defines the effect of modified high-intensity interval training (HIIT) on liver fat, cardiac function and metabolic control in adults with NAFLD. Twenty-three patients with NAFLD [age 54±10 years, body mass index (BMI) 31±4 kg/m(2), intra-hepatic lipid >5%) were assigned to either 12 weeks HIIT or standard care (controls). HIIT involved thrice weekly cycle ergometry for 30-40 min. MRI and spectroscopy were used to assess liver fat, abdominal fat and cardiac structure/function/energetics. Glucose control was assessed by oral glucose tolerance test and body composition by air displacement plethysmography. Relative to control, HIIT decreased liver fat (11±5% to 8±2% compared with 10±4% to 10±4% P=0.019), whole-body fat mass (35±7 kg to 33±8 kg compared with 31±9 kg to 32±9 kg, P=0.013), alanine (52±29 units/l to 42±20 units/l compared with 47±22 units/l to 51±24 units/l, P=0.016) and aspartate aminotransferase (AST; 36±18 units/l to 33±15 units/l compared with 31±8 units/l to 35±8 units/l, P=0.017) and increased early diastolic filling rate (244±84 ml/s to 302±107 ml/s compared with 255±82 ml/s to 251±82 ml/s, P=0.018). There were no between groups differences in glucose control. Modified HIIT reduces liver fat and improves body composition alongside benefits to cardiac function in patients with NAFLD and should be considered as part of the broader treatment regimen by clinical care teams. ISRCTN trial ID: ISRCTN78698481. © 2015 Authors; published by Portland Press Limited.

The effect of infection-control barriers on the light intensity of light-cure units and depth of cure of composite.

PubMed

Hodson, Nicholas A; Dunne, Stephen M; Pankhurst, Caroline L

2005-04-01

Dental curing lights are vulnerable to contamination with oral fluids during routine intra-oral use. This controlled study aimed to evaluate whether or not disposable transparent barriers placed over the light-guide tip would affect light output intensity or the subsequent depth of cure of a composite restoration. The impact on light intensity emitted from high-, medium- and low-output light-cure units in the presence of two commercially available disposable infection-control barriers was evaluated against a no-barrier control. Power density measurements from the three intensity light-cure units were recorded with a radiometer, then converted to a digital image using an intra-oral camera and values determined using a commercial computer program. For each curing unit, the measurements were repeated on ten separate occasions with each barrier and the control. Depth of cure was evaluated using a scrape test in a natural tooth model. At each level of light output, the two disposable barriers produced a significant reduction in the mean power density readings compared to the no-barrier control (P<0.005). The cure sleeve inhibited light output to a greater extent than either the cling film or the control (P<0.005). Only composite restorations light-activated by the high level unit demonstrated a small but significant decrease in the depth of cure compared to the control (P<0.05). Placing disposable barriers over the light-guide tip reduced the light intensity from all three curing lights. There was no impact on depth of cure except for the high-output light, where a small decrease in cure depth was noted but this was not considered clinically significant. Disposable barriers can be recommended for use with light-cure lights.

Structure-reactivity relationship of Amadori rearrangement products compared to related ketoses.

PubMed

Kaufmann, Martin; Meissner, Philipp M; Pelke, Daniel; Mügge, Clemens; Kroh, Lothar W

2016-06-16

Structure-reactivity relationships of Amadori rearrangement products compared to their related ketoses were derived from multiple NMR spectroscopic techniques. Besides structure elucidation of six Amadori rearrangement products derived from d-glucose and d-galactose with l-alanine, l-phenylalanine and l-proline, especially quantitative (13)C selective saturation transfer NMR spectroscopy was applied to deduce information on isomeric systems. It could be shown exemplarily that the Amadori compound N-(1-deoxy-d-fructos-1-yl)-l-proline exhibits much higher isomerisation rates than d-fructose, which can be explained by C-1 substituent mediated intramolecular catalysis. In combination with a reduced carbonyl activity of Amadori compounds compared to their related ketoses which results in an increased acyclic keto isomer concentration, the results on isomerisation dynamics lead to a highly significant increased reactivity of Amadori compounds. This can be clearly seen, comparing approximated carbohydrate milieu stability time constants (ACuSTiC) which is 1 s for N-(1-deoxy-d-fructos-1-yl)-l-proline and 10 s for d-fructose at pD 4.20 ± 0.05 at 350 K. In addition, first NMR spectroscopic data are provided, which prove that α-pyranose of (amino acid substituted) d-fructose adopts both, (2)C5 and (5)C2 conformation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Advice for Gaining Upper Administration Support for Research at an Undergraduate Institution

NASA Astrophysics Data System (ADS)

Isenhower, Donald

2015-10-01

This talk has its beginnings in questions asked after my invited talk for the 2015 APS Prize for Outstanding Research at an Undergraduate Institution at the April APS Meeting. A common question was how to gain support from one's university's administration to start an undergraduate research program. As my talk was addressing work done during 28 years at a university that had a long history of undergraduate research, I was not prepared to answer the question. It is easy to point out what one must do to obtain funding, even if actually obtaining the funding is difficult. Many other aspects of choosing appropriate research projects, collaborations, and such can also be relatively easy to do. Answers and advice in how to get upper level university administrators to notice and help you start a research program is not as easy or obvious, but is what this talk will address. It will be based on the premiss that one is at a university that is centered on providing high quality undergraduate education. Thus you have the job of showing your administration that having students working on a research program under you will help provide the highest level of education possible. Experience over many years of interactions at ACU will be drawn on for the advice provided. Research supported in part by Grants from the U.S. DOE Office of Science.

Retrospective Comparison of Visual Outcomes After KAMRA Corneal Inlay Implantation With Simultaneous PRK or LASIK.

PubMed

Moshirfar, Majid; Bean, Andrew E; Albarracin, Julio C; Rebenitsch, Ronald L; Wallace, Ryan T; Birdsong, Orry C

2018-05-01

To report a retrospective study of simultaneous LASIK versus photorefractive keratectomy (PRK) with accompanying small-aperture cornea inlay implantation (KAMRA; AcuFocus, Inc., Irvine, CA) in treating presbyopia. Simultaneous LASIK/inlay and simultaneous PRK/inlay was performed on 79 and 47 patients, respectively. Follow-up examinations were conducted at 1, 3, and 6 months postoperatively. The main outcome measures were safety, efficacy, predictability, and stability with primary emphasis on monocular uncorrected near visual acuity (UNVA). Both groups met U.S. Food and Drug Administration criteria for efficacy with 95% and 55% of the LASIK/inlay group and 83% and 52% of the PRK/inlay group having a monocular UNVA of 20/40 (J5) and 20/25 (J2), respectively, at 6-month follow-up. Ninety-two percent of the LASIK/inlay group and 95% of the PRK/inlay group had a UDVA of 20/40 or better at 6 months. Two eyes lost one line of corrected distance visual acuity (CDVA). Mild hyperopic shift was noted in both groups at 6 months. Simultaneous PRK/inlay and LASIK/inlay meet the U.S. Food and Drug Administration standards for efficacy and safety based on 6-month preliminary results and have similar outcomes to emmetropic eyes. [J Refract Surg. 2018;34(5):310-315.]. Copyright 2018, SLACK Incorporated.

Programmable Modulation of Copper Nanoclusters Electrochemiluminescence via DNA Nanocranes for Ultrasensitive Detection of microRNA.

PubMed

Zhou, Ying; Wang, Haijun; Zhang, Han; Chai, Yaqin; Yuan, Ruo

2018-03-06

The DNA nanocrane with functionalized manipulator and fixed-size base offered a programmable approach to modulate the luminous efficiency of copper nanoclusters (Cu NCs) for achieving remarkable electrochemiluminescence (ECL) enhancement, further the Cu NCs as signal label was constructed in biosensor for ultrasensitive detection of microRNA-155. Herein, the DNA nanocrane was first constructed by combining binding-induced DNA assembly as manipulator and tetrahedral DNA nanostructure (TDN) as base, which harnessed a small quantity of specific target (microRNA (miRNA)-155) binding to trigger assembly of separate DNA components for producing numerous AT-rich double-stranded DNA (dsDNA) on the vertex of TDN. Upon the incubation of Cu 2+ on the AT-rich dsDNA, each DNA-stabilized Cu NCs probe could be in situ electrochemically generated on an individual TDN owing to the A-Cu 2+ -T bond. Thus, the generation of Cu NCs was highly regulated with AT-rich dsDNA as the template, and its lateral distance was tuned by the TDN size, which were two key factors to influence the luminous efficiency of Cu NCs. By coordinate modulation, the detection limit of the ultrasensitive biosensor for miRNA-155 down to 36 aM and the programmable modulation strategy paved the way for comprehensive applications of DNA nanomachines and metal nanoclusters in biosensing and clinical diagnosis.

Intravascular Ultrasound Guidance for Transjugular Intrahepatic Portosystemic Shunt Procedure in a Swine Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kew, Jacqueline; Davies, Roger P.

2004-01-15

A new method is described for guiding hepato-portalvenous puncture using a longitudinal side-view intravascular ultrasound(L-IVUS) transducer to assist in the performance of transjugularintrahepatic portosystemic shunt (TIPS) in three Australian swine.Simultaneous L-IVUS with an AcuNav (registered) 5-10 MHz 10 Fr transducer(Acuson Corporation, Mountain View, CA, USA) and fluoroscopy guidance was used to image and monitor the hepatic to portal venous puncture,dilatation of the tract, and deployment of the TIPS stent. Flow through the shunt could be demonstrated with both L-IVUS and angiography. TIPS was successful in all swine. The time for portal vein puncture once the target portal vein was identifiedmore » was reduced at each attempt. The number of portal vein puncture attempts was 2, 1, and 1. No post-procedural complication was evident. L-IVUS-guided TIPS is practical and has the potential to improve safety by permitting simultaneous ultrasound and fluoroscopic imaging of the needle and target vascular structures. This technique allows for a more streamlined approach to TIPS, decreasing the fluoroscopic time (hence,decreasing the radiation exposure to the staff and patient) and anesthetic time. In addition, there are improved safety benefits obviating the need for wedged portography, facilitating avoidance of bile duct and hepatic arterial puncture, and minimizing hepatic injury by decreasing liver capsular puncture and the attendant risks.« less

Dual-mode intracranial catheter integrating 3D ultrasound imaging and hyperthermia for neuro-oncology: feasibility study.

PubMed

Herickhoff, Carl D; Light, Edward D; Bing, Kristin F; Mukundan, Srinivasan; Grant, Gerald A; Wolf, Patrick D; Smith, Stephen W

2009-04-01

In this study, we investigated the feasibility of an intracranial catheter transducer with dual-mode capability of real-time 3D (RT3D) imaging and ultrasound hyperthermia, for application in the visualization and treatment of tumors in the brain. Feasibility is demonstrated in two ways: first by using a 50-element linear array transducer (17 mm x 3.1 mm aperture) operating at 4.4 MHz with our Volumetrics diagnostic scanner and custom, electrical impedance-matching circuits to achieve a temperature rise over 4 degrees C in excised pork muscle, and second, by designing and constructing a 12 Fr, integrated matrix and linear-array catheter transducer prototype for combined RT3D imaging and heating capability. This dual-mode catheter incorporated 153 matrix array elements and 11 linear array elements diced on a 0.2 mm pitch, with a total aperture size of 8.4 mm x 2.3 mm. This 3.64 MHz array achieved a 3.5 degrees C in vitro temperature rise at a 2 cm focal distance in tissue-mimicking material. The dual-mode catheter prototype was compared with a Siemens 10 Fr AcuNav catheter as a gold standard in experiments assessing image quality and therapeutic potential and both probes were used in an in vivo canine brain model to image anatomical structures and color Doppler blood flow and to attempt in vivo heating.

Dual-mode Intracranial Catheter Integrating 3D Ultrasound Imaging & Hyperthermia for Neuro-oncology: Feasibility Study

PubMed Central

Herickhoff, Carl D.; Light, Edward D.; Bing, Kristin F.; Mukundan, Srinivasan; Grant, Gerald A.; Wolf, Patrick D.; Smith, Stephen W.

2010-01-01

In this study, we investigated the feasibility of an intracranial catheter transducer with dual-mode capability of real-time 3D (RT3D) imaging and ultrasound hyperthermia, for application in the visualization and treatment of tumors in the brain. Feasibility is demonstrated in two ways: first by using a 50-element linear array transducer (17 mm × 3.1 mm aperture) operating at 4.4 MHz with our Volumetrics diagnostic scanner and custom electrical impedance matching circuits to achieve a temperature rise over 4°C in excised pork muscle, and second by designing and constructing a 12 Fr, integrated matrix and linear array catheter transducer prototype for combined RT3D imaging and heating capability. This dual-mode catheter incorporated 153 matrix array elements and 11 linear array elements diced on a 0.2 mm pitch, with a total aperture size of 8.4 mm × 2.3 mm. This array achieved a 3.5°C in vitro temperature rise at a 2 cm focal distance in tissue-mimicking material. The dual-mode catheter prototype was compared with a Siemens 10 Fr AcuNav™ catheter as a gold standard in experiments assessing image quality and therapeutic potential, and both probes were used in a canine brain model to image anatomical structures and color Doppler blood flow and to attempt in vivo heating. PMID:19630251

Goal-directed control with cortical units that are gated by both top-down feedback and oscillatory coherence.

PubMed

Kerr, Robert R; Grayden, David B; Thomas, Doreen A; Gilson, Matthieu; Burkitt, Anthony N

2014-01-01

The brain is able to flexibly select behaviors that adapt to both its environment and its present goals. This cognitive control is understood to occur within the hierarchy of the cortex and relies strongly on the prefrontal and premotor cortices, which sit at the top of this hierarchy. Pyramidal neurons, the principal neurons in the cortex, have been observed to exhibit much stronger responses when they receive inputs at their soma/basal dendrites that are coincident with inputs at their apical dendrites. This corresponds to inputs from both lower-order regions (feedforward) and higher-order regions (feedback), respectively. In addition to this, coherence between oscillations, such as gamma oscillations, in different neuronal groups has been proposed to modulate and route communication in the brain. In this paper, we develop a simple, but novel, neural mass model in which cortical units (or ensembles) exhibit gamma oscillations when they receive coherent oscillatory inputs from both feedforward and feedback connections. By forming these units into circuits that can perform logic operations, we identify the different ways in which operations can be initiated and manipulated by top-down feedback. We demonstrate that more sophisticated and flexible top-down control is possible when the gain of units is modulated by not only top-down feedback but by coherence between the activities of the oscillating units. With these types of units, it is possible to not only add units to, or remove units from, a higher-level unit's logic operation using top-down feedback, but also to modify the type of role that a unit plays in the operation. Finally, we explore how different network properties affect top-down control and processing in large networks. Based on this, we make predictions about the likely connectivities between certain brain regions that have been experimentally observed to be involved in goal-directed behavior and top-down attention.

Goal-directed control with cortical units that are gated by both top-down feedback and oscillatory coherence

PubMed Central

Kerr, Robert R.; Grayden, David B.; Thomas, Doreen A.; Gilson, Matthieu; Burkitt, Anthony N.

2014-01-01

The brain is able to flexibly select behaviors that adapt to both its environment and its present goals. This cognitive control is understood to occur within the hierarchy of the cortex and relies strongly on the prefrontal and premotor cortices, which sit at the top of this hierarchy. Pyramidal neurons, the principal neurons in the cortex, have been observed to exhibit much stronger responses when they receive inputs at their soma/basal dendrites that are coincident with inputs at their apical dendrites. This corresponds to inputs from both lower-order regions (feedforward) and higher-order regions (feedback), respectively. In addition to this, coherence between oscillations, such as gamma oscillations, in different neuronal groups has been proposed to modulate and route communication in the brain. In this paper, we develop a simple, but novel, neural mass model in which cortical units (or ensembles) exhibit gamma oscillations when they receive coherent oscillatory inputs from both feedforward and feedback connections. By forming these units into circuits that can perform logic operations, we identify the different ways in which operations can be initiated and manipulated by top-down feedback. We demonstrate that more sophisticated and flexible top-down control is possible when the gain of units is modulated by not only top-down feedback but by coherence between the activities of the oscillating units. With these types of units, it is possible to not only add units to, or remove units from, a higher-level unit's logic operation using top-down feedback, but also to modify the type of role that a unit plays in the operation. Finally, we explore how different network properties affect top-down control and processing in large networks. Based on this, we make predictions about the likely connectivities between certain brain regions that have been experimentally observed to be involved in goal-directed behavior and top-down attention. PMID:25152715

Automotive Emission Control.

ERIC Educational Resources Information Center

Lee, Billy D.; And Others

This publication contains instructional materials for both teachers and students for a course in automotive emission control. Instructional materials in this publication are written in terms of student performance using measurable objectives. The course includes 16 units. Each instructional unit includes some or all of the basic components of a…

Stationary Engineering, Environmental Control, Refrigeration. Science Manual I.

ERIC Educational Resources Information Center

Steingress, Frederick M.; And Others

The student materials present lessons about occupations related to environmental control, stationary engineering, and refrigeration. Included are 18 units organized by objective, information, reference, procedure, and assignment. Each lesson involves concrete trade experience where science is applied. Unit titles are: safety and housekeeping,…

40 CFR 63.2250 - What are the general requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., except during periods of process unit or control device startup, shutdown, and malfunction; prior to process unit initial startup; and during the routine control device maintenance exemption specified in... practice requirements are not operating, or during periods of startup, shutdown, and malfunction. Startup...