Two-dimensional ultra-thin SiO(x) (0 < x < 2) nanosheets with long-term cycling stability as lithium ion battery anodes.

PubMed

Sun, Lin; Su, Tingting; Xu, Lei; Liu, Meipin; Du, Hong-Bin

2016-03-21

Ultra-thin SiO(x) (0 < x < 2) nanosheets were obtained via a convenient solvothermal route from a Zintl compound CaSi2. After carbon coating, the SiOx@C nanosheet anodes exhibit high capacity, good rate and superior cycling performance for high-capacity lithium ion battery applications. The specific capacity can be maintained as high as 760 mA h g(-1) with almost no capacity decay after 400 cycles at a current density of 0.5 A g(-1).

Obesity: A crisis of growing proportions.

PubMed

Berall, Glenn B

2002-05-01

Childhood obesity is a condition characterized by an imbalance between energy consumed and energy expended. A variety of factors that are unique to our modern day western society lead to the increasing prevalence of childhood obesity. The ease and volume of food supply, high calorie density, convenience foods, convenience transportation, sedentary lifestyle, school system issues, and perceptions of unsafe neighbourhoods all contribute to this increase in obesity. Consequences of childhood obesity are now known to carry health risks for childhood, as well as greater health risks in adulthood. A societal approach to solving this problem is necessary. The paediatrician's role as an advocate in society is vital. On an individual basis, paediatricians can help to identify these patterns early and prevent them by providing basic nutritional advice to the child and parents at an early stage.

Obesogenic Retail Food Environments Around New Zealand Schools: A National Study.

PubMed

Vandevijvere, Stefanie; Sushil, Zaynel; Exeter, Daniel J; Swinburn, Boyd

2016-09-01

This is the first nationwide spatial analysis of retail food environments around more and less socioeconomically deprived schools in New Zealand. Addresses from all food outlets were retrieved from 66 City and District Councils in 2014. All fast food, takeaway, and convenience outlets (FFTCs) were geocoded and (spatially) validated in 2015. Density and proximity of FFTCs around/from all schools were stratified by urban/rural area and quintile of school socioeconomic deprivation. About 68.5% urban and 14.0% rural schools had a convenience store within 800 m; 62.0% urban and 9.5% rural schools had a fast food or takeaway outlet within 800 m. Median road distance to the closest convenience store from urban schools was significantly higher for the least (617 m) versus the most deprived (521 m) schools (p<0.001); the opposite was found for rural schools. Median FFTC density was 2.4 (0.8-4.8) per km(2) and maximum density was 85 per km(2) within 800 m of urban schools. Median density of convenience stores around the least deprived urban schools was significantly lower than around the most deprived schools (p<0.01). Access to unhealthy foods through FFTCs within walking distance from urban schools is substantial in New Zealand, and greater for the most versus the least deprived schools. Health promoters should work with retailers to explore feasible actions to reduce children's exposure to unhealthy foods before and after school, and provisions to allow Councils to restrict new FFTCs in school neighborhoods could be included in the Local Government Act. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Obesogenic neighbourhoods: the impact of neighbourhood restaurants and convenience stores on adolescents' food consumption behaviours.

PubMed

He, Meizi; Tucker, Patricia; Irwin, Jennifer D; Gilliland, Jason; Larsen, Kristian; Hess, Paul

2012-12-01

To examine the relationship between the neighbourhood food environment and dietary intake among adolescents. Cross-sectional design using: (i) a geographic information system to assess characteristics of the neighbourhood food environment and neighbourhood socio-economic status; (ii) the modified Healthy Eating Index (HEI) to assess participants' overall diet quality; and (iii) generalized linear models to examine associations between HEI and home and school food environmental correlates. Mid-sized Canadian city in Ontario, Canada. Participants Grade 7 and 8 students (n 810) at twenty-one elementary schools. Students living in neighbourhoods with a lower diversity of land-use types, compared with their higher diversity counterparts, had higher HEI scores (P < 0.05). Students with more than 1 km between their home and the nearest convenience store had higher HEI scores than those living within 1 km (P < 0.01). Students attending schools with a distance further than 1 km from the nearest convenience store (P < 0.01) and fast-food outlet (P < 0.05) had higher HEI scores than those within 1 km. Those attending schools with three or more fast-food outlets within 1 km had lower HEI scores than those attending schools with no fast-food outlet in the school surroundings (P < 0.05). Close proximity to convenience stores in adolescents' home environments is associated with low HEI scores. Within adolescents' school environments, close proximity to convenience and fast-food outlets and a high density of fast-food outlets are associated with low HEI scores.

Oxidation of gallium arsenide in a plasma multipole device. Study of the MOS structures obtained

NASA Technical Reports Server (NTRS)

Gourrier, S.; Mircea, A.; Simondet, F.

1980-01-01

The oxygen plasma oxidation of GaAs was studied in order to obtain extremely high frequency responses with MOS devices. In the multipole system a homogeneous oxygen plasma of high density can easily be obtained in a large volume. This system is thus convenient for the study of plasma oxidation of GaAs. The electrical properties of the MOS diodes obtained in this way are controlled by interface states, located mostly in the upper half of the band gap where densities in the 10 to the 13th power/(sq cm) (eV) range can be estimated. Despite these interface states the possibility of fabricating MOSFET transistors working mostly in the depletion mode for a higher frequency cut-off still exists.

Revisiting the emission from relativistic blast waves in a density-jump medium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geng, J. J.; Huang, Y. F.; Dai, Z. G.

2014-09-01

Re-brightening bumps are frequently observed in gamma-ray burst afterglows. Many scenarios have been proposed to interpret the origin of these bumps, of which a blast wave encountering a density-jump in the circumburst environment has been questioned by recent works. We develop a set of differential equations to calculate the relativistic outflow encountering the density-jump by extending the work of Huang et al. This approach is a semi-analytic method and is very convenient. Our results show that late high-amplitude bumps cannot be produced under common conditions, rather only a short plateau may emerge even when the encounter occurs at an earlymore » time (<10{sup 4} s). In general, our results disfavor the density-jump origin for those observed bumps, which is consistent with the conclusion drawn from full hydrodynamics studies. The bumps thus should be caused by other scenarios.« less

Eco-friendly plasmonic sensors: using the photothermal effect to prepare metal nanoparticle-containing test papers for highly sensitive colorimetric detection.

PubMed

Tseng, Shao-Chin; Yu, Chen-Chieh; Wan, Dehui; Chen, Hsuen-Li; Wang, Lon Alex; Wu, Ming-Chung; Su, Wei-Fang; Han, Hsieh-Cheng; Chen, Li-Chyong

2012-06-05

Convenient, rapid, and accurate detection of chemical and biomolecules would be a great benefit to medical, pharmaceutical, and environmental sciences. Many chemical and biosensors based on metal nanoparticles (NPs) have been developed. However, as a result of the inconvenience and complexity of most of the current preparation techniques, surface plasmon-based test papers are not as common as, for example, litmus paper, which finds daily use. In this paper, we propose a convenient and practical technique, based on the photothermal effect, to fabricate the plasmonic test paper. This technique is superior to other reported methods for its rapid fabrication time (a few seconds), large-area throughput, selectivity in the positioning of the NPs, and the capability of preparing NP arrays in high density on various paper substrates. In addition to their low cost, portability, flexibility, and biodegradability, plasmonic test paper can be burned after detecting contagious biomolecules, making them safe and eco-friendly.

Analysis of the photophysical properties of zearalenone using density functional theory

USDA-ARS?s Scientific Manuscript database

The intrinsic photophysical properties of the resorcylic acid moiety of zearalenone offer a convenient label free method to determine zearalenone levels in contaminated agricultural products. Density functional theory and steady-state fluorescence methods were applied to investigate the role of stru...

Chemical growth of ZnO nanorod arrays on textured nanoparticle nanoribbons and its second-harmonic generation performance

NASA Astrophysics Data System (ADS)

Gui, Zhou; Wang, Xian; Liu, Jian; Yan, Shanshan; Ding, Yanyan; Wang, Zhengzhou; Hu, Yuan

2006-07-01

On the basis of the highly oriented ZnO nanoparticle nanoribbons as the growth seed layer (GSL) and solution growth technique, we have synthesized vertical ZnO nanorod arrays with high density over a large area and multi-teeth brush nanostructure, respectively, according to the density degree of the arrangement of nanoparticle nanoribbons GSL on the glass substrate. This controllable and convenient technique opens the possibility of creating nanostructured film for industrial fabrication and may represent a facile way to get similar structures of other compounds by using highly oriented GSL to promote the vertical arrays growth. The growth mechanism of the formation of the ordered nanorod arrays is also discussed. The second-order nonlinear optical coefficient d31 of the vertical ZnO nanorod arrays measured by the Maker fringes technique is 11.3 times as large as that of d36 KH 2PO 4 (KDP).

Iron oxide nanoparticle layer templated by polydopamine spheres: a novel scaffold toward hollow-mesoporous magnetic nanoreactors

NASA Astrophysics Data System (ADS)

Huang, Liang; Ao, Lijiao; Xie, Xiaobin; Gao, Guanhui; Foda, Mohamed F.; Su, Wu

2014-12-01

Superparamagnetic iron oxide nanoparticle layers with high packing density and controlled thickness were in situ deposited on metal-affinity organic templates (polydopamine spheres), via one-pot thermal decomposition. The as synthesized hybrid structure served as a facile nano-scaffold toward hollow-mesoporous magnetic carriers, through surfactant-assisted silica encapsulation and its subsequent calcination. Confined but accessible gold nanoparticles were successfully incorporated into these carriers to form a recyclable catalyst, showing quick magnetic response and a large surface area (642.5 m2 g-1). Current nano-reactors exhibit excellent catalytic performance and high stability in reduction of 4-nitrophenol, together with convenient magnetic separability and good reusability. The integration of compact iron oxide nanoparticle layers with programmable polydopamine templates paves the way to fabricate magnetic-response hollow structures, with high permeability and multi-functionality.Superparamagnetic iron oxide nanoparticle layers with high packing density and controlled thickness were in situ deposited on metal-affinity organic templates (polydopamine spheres), via one-pot thermal decomposition. The as synthesized hybrid structure served as a facile nano-scaffold toward hollow-mesoporous magnetic carriers, through surfactant-assisted silica encapsulation and its subsequent calcination. Confined but accessible gold nanoparticles were successfully incorporated into these carriers to form a recyclable catalyst, showing quick magnetic response and a large surface area (642.5 m2 g-1). Current nano-reactors exhibit excellent catalytic performance and high stability in reduction of 4-nitrophenol, together with convenient magnetic separability and good reusability. The integration of compact iron oxide nanoparticle layers with programmable polydopamine templates paves the way to fabricate magnetic-response hollow structures, with high permeability and multi-functionality. Electronic supplementary information (ESI) available: Fig. S1-S5. See DOI: 10.1039/c4nr05931j

Grafting density effects, optoelectrical properties and nano-patterning of poly(para-phenylene) brushes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Jihua; Alonzo, Jose; Yu, Xiang

2013-09-24

Well-defined conjugated polymers in confined geometries are challenging to synthesize and characterize, yet they are potentially useful in a broad range of organic optoelectronic devices such as transistors, light emitting diodes, solar cells, sensors, and nanocircuits. We report a systematic study of optoelectrical properties, grafting density effects, and nanopatterning of a model, end-tethered conjugated polymer system. Specifically, poly(para-phenylene) (PPP) brushes of various grafting density are created in situ by aromatizing well-defined, end-tethered poly(1,3-cyclohexadiene) (PCHD) “precursor brushes”. Furthermore, this novel precursor brush approach provides a convenient way to make and systematically control the grafting density of high molecular weight conjugated polymermore » brushes that would otherwise be insoluble. Finally, this allows us to examine how grafting density impacts the effective conjugation length of the conjugated PPP brushes and to adapt the fabrication method to develop spatially patterned conjugated brush systems, which is important for practical applications of conjugated polymer brushes.« less

Convenient and large-scale synthesis of nitrogen-rich hierarchical porous carbon spheres for supercapacitors and CO2 capture

NASA Astrophysics Data System (ADS)

Chang, Binbin; Zhang, Shouren; Yin, Hang; Yang, Baocheng

2017-08-01

Herein, considering the great potential of nitrogen-doped hierarchical porous carbons in energy storage and CO2 capture, we designed a convenient and easily large-scale production strategy for preparing nitrogen-doped hierarchical porous carbon sphere (NHPCS) materials. In this synthesis route, spherical resorcinol-formaldehyde (RF) resins were selected as carbon precursor, and then the ZnCl2-impregnated RF resin spheres were carbonized in a NH3 atmosphere at a temperature range of 600-800 °C. During the one-step heat-treatment process, nitrogen atom could be efficiently incorporated into the carbon skeleton, and the interconnected and hierarchical pore structure with different micro/mesopore proportion could be generated and tuned by adjusting the activating agent ZnCl2 dosage and carbonization temperature. The resultant nitrogen-doped hierarchical porous carbon sphere materials exhibited a satisfactory charge storage capacity, and the optimal sample of NHPCS-2-8 with a high mesopore proportion obtained at 800 °C with a ZnCl2/RF mass ratio of 2:1 presented a specific capacitance of 273.8 F g-1 at a current density of 0.5 A g-1. More importantly, the assembled NHPCS-2-8-based symmetric capacitor displayed a high energy density of 17.2 Wh kg-1 at a power density of 178.9 W kg-1 within a voltage window of 0 ∼ 1.8 V in 0.5 M Na2SO4 aqueous electrolyte. In addition, the CO2 capture application of these NHPCS materials was also explored, and the optimal sample of NHPCS-0-8 with a large micropore proportion prepared at 800 °C exhibited an exceptional CO2 uptake capacity at ambient pressures of up to 4.23 mmol g-1 at 0 °C.

The Built Food Environment and Dietary Intake among African-American Adults

PubMed Central

Reitzel, Lorraine R.; Okamoto, Hiroe; Hernandez, Daphne C.; Regan, Seann D.; McNeill, Lorna H.; Obasi, Ezemenari M.

2016-01-01

Objectives The built food environment surrounding people's homes may influence their dietary intake. This exploratory study examined how the density of different sources of food in the residential environment was associated with dietary consumption among 77 African-American adults in Houston, Texas. Methods The number of fast-food-type restaurants, large grocery stores, and convenience-type stores within 2- and 5-mile residential buffers were divided by the respective areas to obtain food environment density variables. Intake of fruit and vegetables [FV], fiber [FI], and percent energy from fat [PEF] was assessed using National Health Interview Survey items. Covariate-adjusted regressions were used to assess relations of interest. Results Greater density of fast-food-type restaurants within 2 miles was associated with greater FV, FI, and PEF (ps ≤ .012); and for FV and FI within 5 miles (ps < .004). Density of large grocery stores was unrelated to intake. Greater density of convenience-type stores within 2 miles was negatively associated with FV and FI (ps ≤ .03); results became marginal at 5 miles for FV (p = .10) but not FI (p = .03). Conclusion Maximizing healthy offerings in venue-rich metropolitan areas might provide direction for policies to reduce obesity. PMID:26685808

Effective Dark Matter Halo Catalog in f(R) Gravity.

PubMed

He, Jian-Hua; Hawken, Adam J; Li, Baojiu; Guzzo, Luigi

2015-08-14

We introduce the idea of an effective dark matter halo catalog in f(R) gravity, which is built using the effective density field. Using a suite of high resolution N-body simulations, we find that the dynamical properties of halos, such as the distribution of density, velocity dispersion, specific angular momentum and spin, in the effective catalog of f(R) gravity closely mimic those in the cold dark matter model with a cosmological constant (ΛCDM). Thus, when using effective halos, an f(R) model can be viewed as a ΛCDM model. This effective catalog therefore provides a convenient way for studying the baryonic physics, the galaxy halo occupation distribution and even semianalytical galaxy formation in f(R) cosmologies.

Measurements of trap dynamics of cold OH molecules using resonance-enhanced multiphoton ionization

NASA Astrophysics Data System (ADS)

Gray, John M.; Bossert, Jason A.; Shyur, Yomay; Lewandowski, H. J.

2017-08-01

Trapping cold, chemically important molecules with electromagnetic fields is a useful technique to study small molecules and their interactions. Traps provide long interaction times, which are needed to precisely examine these low-density molecular samples. However, the trapping fields lead to nonuniform molecular density distributions in these systems. Therefore, it is important to be able to experimentally characterize the spatial density distribution in the trap. Ionizing molecules at different locations in the trap using resonance-enhanced multiphoton ionization (REMPI) and detecting the resulting ions can be used to probe the density distribution even at the low density present in these experiments because of the extremely high efficiency of detection. Until recently, one of the most chemically important molecules, OH, did not have a convenient REMPI scheme identified. Here, we use a newly developed 1 +1' REMPI scheme to detect trapped cold OH molecules. We use this capability to measure the trap dynamics of the central density of the cloud and the density distribution. These types of measurements can be used to optimize loading of molecules into traps, as well as to help characterize the energy distribution, which is critical knowledge for interpreting molecular collision experiments.

Motor unit number estimation based on high-density surface electromyography decomposition.

PubMed

Peng, Yun; He, Jinbao; Yao, Bo; Li, Sheng; Zhou, Ping; Zhang, Yingchun

2016-09-01

To advance the motor unit number estimation (MUNE) technique using high density surface electromyography (EMG) decomposition. The K-means clustering convolution kernel compensation algorithm was employed to detect the single motor unit potentials (SMUPs) from high-density surface EMG recordings of the biceps brachii muscles in eight healthy subjects. Contraction forces were controlled at 10%, 20% and 30% of the maximal voluntary contraction (MVC). Achieved MUNE results and the representativeness of the SMUP pools were evaluated using a high-density weighted-average method. Mean numbers of motor units were estimated as 288±132, 155±87, 107±99 and 132±61 by using the developed new MUNE at 10%, 20%, 30% and 10-30% MVCs, respectively. Over 20 SMUPs were obtained at each contraction level, and the mean residual variances were lower than 10%. The new MUNE method allows a convenient and non-invasive collection of a large size of SMUP pool with great representativeness. It provides a useful tool for estimating the motor unit number of proximal muscles. The present new MUNE method successfully avoids the use of intramuscular electrodes or multiple electrical stimuli which is required in currently available MUNE techniques; as such the new MUNE method can minimize patient discomfort for MUNE tests. Copyright © 2016 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Ultralight Graphene/Carbon Nanotubes Aerogels with Compressibility and Oil Absorption Properties.

PubMed

Zhao, Da; Yu, Li; Liu, Dongxu

2018-04-22

Graphene aerogels have many advantages, such as low density, high elasticity and strong adsorption. They are considered to be widely applicable in many fields. At present, the most valuable research area aims to find a convenient and effective way to prepare graphene aerogels with excellent properties. In this work graphene/carbon nanotube aerogels are prepared through hydrothermal reduction, freeze-drying and high temperature heat treatment with the blending of graphene oxide and carbon nanotubes. A new reducing agent-ascorbic acid is selected to explore the best preparation process. The prepared aerogels have compression and resilience and oil absorption properties due to the addition of carbon nanotubes as designed.

Thermodynamics of an Attractive 2D Fermi Gas

NASA Astrophysics Data System (ADS)

Fenech, K.; Dyke, P.; Peppler, T.; Lingham, M. G.; Hoinka, S.; Hu, H.; Vale, C. J.

2016-01-01

Thermodynamic properties of matter are conveniently expressed as functional relations between variables known as equations of state. Here we experimentally determine the compressibility, density, and pressure equations of state for an attractive 2D Fermi gas in the normal phase as a function of temperature and interaction strength. In 2D, interacting gases exhibit qualitatively different features to those found in 3D. This is evident in the normalized density equation of state, which peaks at intermediate densities corresponding to the crossover from classical to quantum behavior.

Metal coordination polymer derived mesoporous Co3O4 nanorods with uniform TiO2 coating as advanced anodes for lithium ion batteries

NASA Astrophysics Data System (ADS)

Geng, Hongbo; Ang, Huixiang; Ding, Xianguang; Tan, Huiteng; Guo, Guile; Qu, Genlong; Yang, Yonggang; Zheng, Junwei; Yan, Qingyu; Gu, Hongwei

2016-01-01

In this work, a one-dimensional Co3O4@TiO2 core-shell electrode material with superior electrochemical performance is fabricated by a convenient and controllable route. The approach involves two main steps: the homogeneous deposition of polydopamine and TiO2 layers in sequence on the cobalt coordination polymer and the thermal decomposition of the polymer matrix. The as-prepared electrode material can achieve excellent electrochemical properties and stability as an anode material for lithium ion batteries, such as a high specific capacity of 1279 mA h g-1, good cycling stability (around 803 mA h g-1 at a current density of 200 mA g-1 after 100 cycles), and stable rate performance (around 520 mA h g-1 at a current density of 1000 mA g-1). This dramatic electrochemical performance is mainly attributed to the excellent structural characteristics, which could improve the electrical conductivity and lithium ion mobility, as well as electrolyte permeability and architectural stability during cycling.In this work, a one-dimensional Co3O4@TiO2 core-shell electrode material with superior electrochemical performance is fabricated by a convenient and controllable route. The approach involves two main steps: the homogeneous deposition of polydopamine and TiO2 layers in sequence on the cobalt coordination polymer and the thermal decomposition of the polymer matrix. The as-prepared electrode material can achieve excellent electrochemical properties and stability as an anode material for lithium ion batteries, such as a high specific capacity of 1279 mA h g-1, good cycling stability (around 803 mA h g-1 at a current density of 200 mA g-1 after 100 cycles), and stable rate performance (around 520 mA h g-1 at a current density of 1000 mA g-1). This dramatic electrochemical performance is mainly attributed to the excellent structural characteristics, which could improve the electrical conductivity and lithium ion mobility, as well as electrolyte permeability and architectural stability during cycling. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr08570e

Analysis and Design Considerations of a High-Power Density, Dual Air Gap, Axial-Field Brushless, Permanent Magnet Motor.

NASA Astrophysics Data System (ADS)

Cho, Chahee Peter

1995-01-01

Until recently, brush dc motors have been the dominant drive system because they provide easily controlled motor speed over a wide range, rapid acceleration and deceleration, convenient control of position, and lower product cost. Despite these capabilities, the brush dc motor configuration does not satisfy the design requirements for the U.S. Navy's underwater propulsion applications. Technical advances in rare-earth permanent magnet materials, in high-power semiconductor transistor technology, and in various rotor position-sensing devices have made using brushless permanent magnet motors a viable alternative. This research investigates brushless permanent magnet motor technology, studying the merits of dual-air gap, axial -field, brushless, permanent magnet motor configuration in terms of power density, efficiency, and noise/vibration levels. Because the design objectives for underwater motor applications include high-power density, high-performance, and low-noise/vibration, the traditional, simplified equivalent circuit analysis methods to assist in meeting these goals were inadequate. This study presents the development and verification of detailed finite element analysis (FEA) models and lumped parameter circuit models that can calculate back electromotive force waveforms, inductance, cogging torque, energized torque, and eddy current power losses. It is the first thorough quantification of dual air-gap, axial -field, brushless, permanent magnet motor parameters and performance characteristics. The new methodology introduced in this research not only facilitates the design process of an axial field, brushless, permanent magnet motor but reinforces the idea that the high-power density, high-efficiency, and low-noise/vibration motor is attainable.

Obesity-promoting food environments and the spatial clustering of food outlets around schools.

PubMed

Day, Peter L; Pearce, Jamie

2011-02-01

The increasing prevalence of overweight and obesity in school-aged children is potentially linked to contextual influences such as the food environment around schools. The proximity of fast-food and convenience stores to schools may enhance access to unhealthy foods and have a negative impact on diet. This study used spatial cluster analysis to determine whether food outlets are clustered around schools and evaluated the extent of food outlet clustering by school and school neighborhood sociodemographic characteristics. The locations in 2008 of all schools, fast-food outlets, and convenience stores in five urban regions across New Zealand were geocoded. Using GIS analysis conducted in 2009, the number and proportion of outlets within 400-m and 800-m road distance around each school was calculated. The spatial clustering of food outlets within 1.5 km of schools was determined using a multi-type K-function. Food outlet type, school level, SES, the degree of population density, and commercial land use zoning around each school were compared. Primary/intermediate schools had a total proportion of 19.3 outlets per 1000 students within 800 m compared to 6.6 for secondary schools. The most socially deprived quintile of schools had three times the number and proportion of food outlets compared to the least-deprived quintile. There was a high degree of clustering of food outlets around schools, with up to 5.5 times more outlets than might be expected. Outlets were most clustered up to 800 m from schools and around secondary schools, socially deprived schools, and schools in densely populated and commercially zoned areas. Food environments in New Zealand within walking proximity to schools are characterized by a high density of fast-food outlets and convenience stores, particularly in more-socially deprived settings. These obesogenic environments provide ready access to obesity-promoting foods that may have a negative impact on student diet and contribute to inequalities in health. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Ultralight Graphene/Carbon Nanotubes Aerogels with Compressibility and Oil Absorption Properties

PubMed Central

Zhao, Da; Yu, Li; Liu, Dongxu

2018-01-01

Graphene aerogels have many advantages, such as low density, high elasticity and strong adsorption. They are considered to be widely applicable in many fields. At present, the most valuable research area aims to find a convenient and effective way to prepare graphene aerogels with excellent properties. In this work graphene/carbon nanotube aerogels are prepared through hydrothermal reduction, freeze-drying and high temperature heat treatment with the blending of graphene oxide and carbon nanotubes. A new reducing agent-ascorbic acid is selected to explore the best preparation process. The prepared aerogels have compression and resilience and oil absorption properties due to the addition of carbon nanotubes as designed. PMID:29690559

Optoelectronically probing the density of nanowire surface trap states to the single state limit

NASA Astrophysics Data System (ADS)

Dan, Yaping

2015-02-01

Surface trap states play a dominant role in the optoelectronic properties of nanoscale devices. Understanding the surface trap states allows us to properly engineer the device surfaces for better performance. But characterization of surface trap states at nanoscale has been a formidable challenge using the traditional capacitive techniques. Here, we demonstrate a simple but powerful optoelectronic method to probe the density of nanowire surface trap states to the single state limit. In this method, we choose to tune the quasi-Fermi level across the bandgap of a silicon nanowire photoconductor, allowing for capture and emission of photogenerated charge carriers by surface trap states. The experimental data show that the energy density of nanowire surface trap states is in a range from 109 cm-2/eV at deep levels to 1012 cm-2/eV near the conduction band edge. This optoelectronic method allows us to conveniently probe trap states of ultra-scaled nano/quantum devices at extremely high precision.

Approximations used in calculating many-body effects in resonant ((dt. mu. )dee) formation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cohen, J.S.; Leon, M.

1989-02-01

The approximations needed to treat the resonant formation of the compound molecule ((dt..mu..)dee)/sup */ as a line-broadening process are examined. The necessary criteria for applying the impact (Lorentzian) approximation are shown to be seriously violated under the usual conditions of muon-catalyzed fusion. Neither the condition for binary collisions nor the requirement that the detuning not be too large holds. A much more appropriate description is the many-body quasistatic approximation, which is valid for large detunings at any density and for practically the whole profile at high densities. The convenient factorization of the three-body rate into a convolution of a two-bodymore » rate with a broadening factor is shown to hold within some approximations, but the broadening factor itself depends on the transition being considered.« less

Simulation of the early startup period of high-temperature heat pipes from the frozen state by a rarefied vapor self-diffusion model

NASA Technical Reports Server (NTRS)

Cao, Y.; Faghri, A.

1993-01-01

The heat pipe startup process is described physically and is divided into five periods for convenience of analysis. The literature survey revealed that none of the previous attempts to simulate the heat pipe startup process numerically were successful, since the rarefied vapor flow in the heat pipe was not considered. Therefore, a rarefied vapor self-diffusion model is proposed, and the early startup periods, in which the rarefied vapor flow is dominant within the heat pipe, are first simulated numerically. The numerical results show that large vapor density gradients existed along the heat pipe length, and the vapor flow reaches supersonic velocities when the density is extremely low. The numerical results are compared with the experimental data of the early startup period with good agreement.

Utility of a scanning densitometer in analyzing remotely sensed imagery

NASA Technical Reports Server (NTRS)

Dooley, J. T.

1976-01-01

The utility of a scanning densitometer for analyzing imagery in the NASA Lewis Research Center's regional remote sensing program was evaluated. Uses studied include: (1) quick-look screening of imagery by means of density slicing, magnification, color coding, and edge enhancement; (2) preliminary category classification of both low- and high-resolution data bases; and (3) quantitative measurement of the extent of features within selected areas. The densitometer was capable of providing fast, convenient, and relatively inexpensive preliminary analysis of aerial and satellite photography and scanner imagery involving land cover, water quality, strip mining, and energy conservation.

Studies on an ultrasonic atomization feed direct methanol fuel cell.

PubMed

Wu, Chaoqun; Liu, Linghao; Tang, Kai; Chen, Tao

2017-01-01

Direct methanol fuel cell (DMFC) is promising as an energy conversion device for the replacement of conventional chemical cell in future, owing to its convenient fuel storage, high energy density and low working temperature. The development of DMFC technology is currently limited by catalyst poison and methanol crossover. To alleviate the methanol crossover, a novel fuel supply system based on ultrasonic atomization is proposed. Experimental investigations on this fuel supply system to evaluate methanol permeation rates, open circuit voltages (OCVs) and polarization curves under a series of conditions have been carried out and reported in this paper. In comparison with the traditional liquid feed DMFC system, it can be found that the methanol crossover under the ultrasonic atomization feed system was significantly reduced because the DMFC reaches a large stable OCV value. Moreover, the polarization performance does not vary significantly with the liquid feed style. Therefore, the cell fed by ultrasonic atomization can be operated with a high concentration methanol to improve the energy density of DMFC. Under the supply condition of relatively high concentration methanol such as 4M and 8M, the maximum power density fed by ultrasonic atomization is higher than liquid by 6.05% and 12.94% respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

High Specific Power Motors in LN2 and LH2

NASA Technical Reports Server (NTRS)

Brown, Gerald V.; Jansen, Ralph H.; Trudell, Jeffrey J.

2007-01-01

A switched reluctance motor has been operated in liquid nitrogen (LN2) with a power density as high as that reported for any motor or generator. The high performance stems from the low resistivity of Cu at LN2 temperature and from the geometry of the windings, the combination of which permits steady-state rms current density up to 7000 A/cm2, about 10 times that possible in coils cooled by natural convection at room temperature. The Joule heating in the coils is conducted to the end turns for rejection to the LN2 bath. Minimal heat rejection occurs in the motor slots, preserving that region for conductor. In the end turns, the conductor layers are spaced to form a heat-exchanger-like structure that permits nucleate boiling over a large surface area. Although tests were performed in LN2 for convenience, this motor was designed as a prototype for use with liquid hydrogen (LH2) as the coolant. End-cooled coils would perform even better in LH2 because of further increases in copper electrical and thermal conductivities. Thermal analyses comparing LN2 and LH2 cooling are presented verifying that end-cooled coils in LH2 could be either much longer or could operate at higher current density without thermal runaway than in LN2.

High Specific Power Motors in LN2 and LH2

NASA Technical Reports Server (NTRS)

Brown, Gerald V.; Jansen, Ralph H.; Trudell, Jeffrey J.

2007-01-01

A switched reluctance motor has been operated in liquid nitrogen (LN2) with a power density as high as that reported for any motor or generator. The high performance stems from the low resistivity of Cu at LN2 temperature and from the geometry of the windings, the combination of which permits steady-state rms current density up to 7000 A/sq cm, about 10 times that possible in coils cooled by natural convection at room temperature. The Joule heating in the coils is conducted to the end turns for rejection to the LN2 bath. Minimal heat rejection occurs in the motor slots, preserving that region for conductor. In the end turns, the conductor layers are spaced to form a heat-exchanger-like structure that permits nucleate boiling over a large surface area. Although tests were performed in LN2 for convenience, this motor was designed as a prototype for use with liquid hydrogen (LH2) as the coolant. End-cooled coils would perform even better in LH2 because of further increases in copper electrical and thermal conductivities. Thermal analyses comparing LN2 and LH2 cooling are presented verifying that end-cooled coils in LH2 could be either much longer or could operate at higher current density without thermal runaway than in LN2.

Ultrahigh-Energy Density Lithium-Ion Cable Battery Based on the Carbon-Nanotube Woven Macrofilms.

PubMed

Wu, Ziping; Liu, Kaixi; Lv, Chao; Zhong, Shengwen; Wang, Qinghui; Liu, Ting; Liu, Xianbin; Yin, Yanhong; Hu, Yingyan; Wei, Di; Liu, Zhongfan

2018-05-01

Moore's law predicts the performance of integrated circuit doubles every two years, lasting for more than five decades. However, the improvements of the performance of energy density in batteries lag far behind that. In addition, the poor flexibility, insufficient-energy density, and complexity of incorporation into wearable electronics remain considerable challenges for current battery technology. Herein, a lithium-ion cable battery is invented, which is insensitive to deformation due to its use of carbon nanotube (CNT) woven macrofilms as the charge collectors. An ultrahigh-tap density of 10 mg cm -2 of the electrodes can be obtained, which leads to an extremely high-energy density of 215 mWh cm -3 . The value is approximately seven times than that of the highest performance reported previously. In addition, the battery displays very stable rate performance and lower internal resistance than conventional lithium-ion batteries using metal charge collectors. Moreover, it demonstrates excellent convenience for connecting electronics as a new strategy is applied, in which both electrodes can be integrated into one end by a CNT macrorope. Such an ultrahigh-energy density lithium-ion cable battery provides a feasible way to power wearable electronics with commercial viability. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effective mass and Fermi surface complexity factor from ab initio band structure calculations

NASA Astrophysics Data System (ADS)

Gibbs, Zachary M.; Ricci, Francesco; Li, Guodong; Zhu, Hong; Persson, Kristin; Ceder, Gerbrand; Hautier, Geoffroy; Jain, Anubhav; Snyder, G. Jeffrey

2017-02-01

The effective mass is a convenient descriptor of the electronic band structure used to characterize the density of states and electron transport based on a free electron model. While effective mass is an excellent first-order descriptor in real systems, the exact value can have several definitions, each of which describe a different aspect of electron transport. Here we use Boltzmann transport calculations applied to ab initio band structures to extract a density-of-states effective mass from the Seebeck Coefficient and an inertial mass from the electrical conductivity to characterize the band structure irrespective of the exact scattering mechanism. We identify a Fermi Surface Complexity Factor: Nv*K* from the ratio of these two masses, which in simple cases depends on the number of Fermi surface pockets (Nv* ) and their anisotropy K*, both of which are beneficial to high thermoelectric performance as exemplified by the high values found in PbTe. The Fermi Surface Complexity factor can be used in high-throughput search of promising thermoelectric materials.

A Fundamental Investigation of Crack and Surrounding Damage in Stiff Clays

DTIC Science & Technology

1988-09-01

equation of state is written in terms of entropy production. A generalized flux is identified as the centroidal movement of the damage zone, and the...on the following governing equation. I I a14 ( 1.1] Ti = z ’_Xc + "_.wXrOt + a.’X ef = 0 where Si is the global entropy production, 1, , and a are...convenient to express the internal energy density u in terms of i Gibb’s potential density and the entropy density s [6.3] u = g + Ts +’ijciji Here

High-Sensitivity Measurement of Density by Magnetic Levitation.

PubMed

Nemiroski, Alex; Kumar, A A; Soh, Siowling; Harburg, Daniel V; Yu, Hai-Dong; Whitesides, George M

2016-03-01

This paper presents methods that use Magnetic Levitation (MagLev) to measure very small differences in density of solid diamagnetic objects suspended in a paramagnetic medium. Previous work in this field has shown that, while it is a convenient method, standard MagLev (i.e., where the direction of magnetization and gravitational force are parallel) cannot resolve differences in density <10(-4) g/cm(3) for macroscopic objects (>mm) because (i) objects close in density prevent each other from reaching an equilibrium height due to hard contact and excluded volume, and (ii) using weaker magnets or reducing the magnetic susceptibility of the medium destabilizes the magnetic trap. The present work investigates the use of weak magnetic gradients parallel to the faces of the magnets as a means of increasing the sensitivity of MagLev without destabilization. Configuring the MagLev device in a rotated state (i.e., where the direction of magnetization and gravitational force are perpendicular) relative to the standard configuration enables simple measurements along the axes with the highest sensitivity to changes in density. Manipulating the distance of separation between the magnets or the lengths of the magnets (along the axis of measurement) enables the sensitivity to be tuned. These modifications enable an improvement in the resolution up to 100-fold over the standard configuration, and measurements with resolution down to 10(-6) g/cm(3). Three examples of characterizing the small differences in density among samples of materials having ostensibly indistinguishable densities-Nylon spheres, PMMA spheres, and drug spheres-demonstrate the applicability of rotated Maglev to measuring the density of small (0.1-1 mm) objects with high sensitivity. This capability will be useful in materials science, separations, and quality control of manufactured objects.

The association between accessibility of local convenience stores and unhealthy diet.

PubMed

Lind, Pernille L; Jensen, Pernille V; Glümer, Charlotte; Toft, Ulla

2016-08-01

High accessibility of unhealthy food stores may contribute to a poor dietary quality. Research on the link between neighbourhood food environment and consumption is limited, especially in a European context. The objective of this study was to examine the relationship between convenience stores (CS) and dietary quality within the Capital Region of Denmark. Cross-sectional study of the geographic food environment in the Capital Region of Denmark based on 47 623 subjects (age 16+ years) with complete information on retail food environment and dietary quality. A categorization procedure to identify CS from a government list of inspected food stores (the Smiley register) was developed. Using GIS network analyses, density of CS within 0.25 km and 0.5 km network buffers from residency was calculated for participants in metropolitan and non-metropolitan areas, respectively. Information on dietary intake and confounders is derived from a questionnaire survey. Multi-level analyses were performed, adjusting for age, sex, individual socio-economic factors and area socio-economic status. In the non-metropolitan population, the odds of having an unhealthy diet increased significantly (P < 0.0001) with increased density of CS. Compared to individuals who did not have a CS within 0.5 km from their home, the odds ratios were 1.20 (95% CI: 1.09-1.33) and 1.37 (95% CI: 1.19-1.57) for individuals having 1 or ≥2 CS, respectively. In the fully adjusted model, the overall association remained significant (P = 0.015) and odds ratios diminished to 1.14 (1.02-1.27) and 1.18 (1.01-1.38). High accessibility of CS in neighbourhoods is associated with less healthy dietary habits among residents. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Evaluation of methyl eugenol and cue-lure traps with solid lure and insecticide dispensers for fruit fly monitoring and male annihilation in the Hawaii Areawide Pest Management Program.

PubMed

Vargas, Roger I; Mau, Ronald F L; Stark, John D; Piñero, Jaime C; Leblanc, Luc; Souder, Steven K

2010-04-01

Methyl eugenol (ME) and cue-lure (C-L) traps with solid lure dispensers were deployed in areas with low and high populations of oriental fruit fly, Bactrocera dorsalis (Hendel), and melon fly, Bactrocera cucurbitae (Coquillett), respectively. In low-density areas, standard Jackson traps or Hawaii Fruit Fly Areawide Pest Management (AWPM) traps with FT Mallet ME wafers impregnated with dimethyl dichloro-vinyl phosphate (DDVP) or AWPM traps with Scentry ME cones and vapor tape performed equally as well as standard Jackson traps with liquid ME/C-L and naled. Standard Jackson traps or AWPM traps with FT Mallet C-L wafers impregnated with DDVP or AWPM traps with Scentry C-L plugs with vapor tape performed equally as well as standard Jackson traps with a lure-naled solution. In high density areas, captures with traps containing FT Mallet wafers (ME and C-L) outperformed AWPM traps with Scentry cones and plugs (ME and C-L) with DDVP insecticidal strips over a 6-mo period. Captures of B. dorsalis and B. cucurbitae with wafers containing both ME and raspberry ketone (FT Mallet MC) were equivalent to those containing separate lures. From a worker safety and convenience standpoint, FT Mallet ME and C-L wafers with DDVP or Scentry plugs, with or without DDVP vapor tape, are more convenient and safer to handle than standard liquid insecticide formulations used for monitoring and male annihilation programs in Hawaii, and for detections traps used on the U.S. mainland. Furthermore, the FT Mallet MC wafer might be used in a single trap in place of two separate traps for detection of both ME and C-L responding fruit flies.

Ultra-thin smart acoustic metasurface for low-frequency sound insulation

NASA Astrophysics Data System (ADS)

Zhang, Hao; Xiao, Yong; Wen, Jihong; Yu, Dianlong; Wen, Xisen

2016-04-01

Insulating low-frequency sound is a conventional challenge due to the high areal mass required by mass law. In this letter, we propose a smart acoustic metasurface consisting of an ultra-thin aluminum foil bonded with piezoelectric resonators. Numerical and experimental results show that the metasurface can break the conventional mass law of sound insulation by 30 dB in the low frequency regime (<1000 Hz), with an ultra-light areal mass density (<1.6 kg/m2) and an ultra-thin thickness (1000 times smaller than the operating wavelength). The underlying physical mechanism of such extraordinary sound insulation performance is attributed to the infinite effective dynamic mass density produced by the smart resonators. It is also demonstrated that the excellent sound insulation property can be conveniently tuned by simply adjusting the external circuits instead of modifying the structure of the metasurface.

A novel and facile synthesis approach for a porous carbon/graphene composite for high-performance supercapacitors.

PubMed

Liu, Ting; Zhang, Xuesha; Liu, Kang; Liu, Yanyan; Liu, Mengjie; Wu, Wenyu; Gu, Yu; Zhang, Ruijun

2018-03-02

We propose a novel and facile synthesis approach to a porous carbon/graphene composite. Graphene is obtained from room-temperature expanded graphite (RTEG), not involving the use of graphite oxide (GO). Porous carbon is acquired by carbonization and KOH-activation of polyvinylpyrrolidone (PVP), which is used to exfoliate RTEG into graphene and inhibit the restacking of the resultant graphene in the present work. The prepared porous carbon/graphene composite has a high specific surface area (SSA) (3008 m 2 g -1 ) and a hierarchical micro- and meso- pore structure (dominant pores in the range of 1-5 nm). Electrochemical measurement demonstrates that the as-prepared porous carbon/graphene composite can deliver an outstanding specific capacitance of up to 340 F g -1 at 5 mV s -1 in 6 M KOH electrolyte. This specific capacitance is among the highest reported so far for porous carbon/graphene materials. Moreover, the prepared composite as an electrode material also exhibits excellent cycling stability (94.4% capacitance retention over 10 000 cycles). The as-fabricated symmetrical supercapacitor exhibits a high energy density of 10.9 W h kg -1 (based on total mass of electrode materials) and an outstanding energy density retention, even at high power density. Compared with conventional preparation routes for porous carbon/graphene composites, the present approach is significantly simple, convenient and cost-effective, which will make it more competent in the development of electrode materials for high-performance supercapacitors.

Electron temperatures and densities in the venus ionosphere: pioneer venus orbiter electron temperature probe results.

PubMed

Brace, L H; Theis, R F; Krehbiel, J P; Nagy, A F; Donahue, T M; McElroy, M B; Pedersen, A

1979-02-23

Altitude profiles of electron temperature and density in the ionosphere of Venus have been obtained by the Pioneer Venus orbiter electron temperatutre probe. Elevated temperatutres observed at times of low solar wind flux exhibit height profiles that are consistent with a model in which less than 5 percent of the solar wind energy is deposited at the ionopause and is conducted downward through an unmagnetized ionosphere to the region below 200 kilomneters where electron cooling to the neutral atmosphere proceeds rapidly. When solar wind fluxes are higher, the electron temperatures and densities are highly structured and the ionopause moves to lower altitudes. The ionopause height in the late afternoon sector observed thus far varies so widely from day to (day that any height variation with solar zenith angle is not apparent in the observations. In the neighborhood of the ionopause, measuremnents of plasma temperatures and densities and magnetic field strength indicate that an induced magnetic barrier plays an important role in the pressure transfer between the solar wind and the ionosphere. The bow, shock is marked by a distinct increase in electron current collected by the instrument, a featutre that provides a convenient identification of the bow shock location.

Increased illumination uniformity and reduced photodamage offered by the Lissajous scanning in fiber-optic two-photon endomicroscopy

NASA Astrophysics Data System (ADS)

Liang, Wenxuan; Murari, Kartikeya; Zhang, Yuying; Chen, Yongping; Li, Ming-Jun; Li, Xingde

2012-02-01

We compare the illumination uniformity and the associated effects of the spiral and Lissajous scanning patterns that are commonly used in an endomicroscope. Theoretical analyses and numerical simulations were first performed to quantitatively investigate the area illumination density in the spiral scanning pattern. The results revealed the potential problem of manifest photodamage due to the very high illumination density in the center of the spiral scan. Similar analyses of the Lissajous scanning pattern, which can be conveniently implemented on the same endomicroscope with no hardware modifications, showed a more uniform illumination density with about an 80-fold reduction in the peak illumination density. To underscore the benefit offered by the improved illumination uniformity, we conducted in vitro two-photon fluorescence imaging of cultured cells stained with a LIVE/DEAD viability assay using our home-built, fiber-optic, two-channel endomicroscopy system. Both the spiral and the Lissajous scans were implemented. Our experimental results showed that cells near the spiral scan center experienced obvious photodamage, whereas cells remained alive over the entire region under the Lissajous beam scanning, confirming the predicted advantage offered by the Lissajous scan over this spiral scan in an endomicroscopy setting.

The nutrient content of US household food purchases by store types

PubMed Central

Stern, Dalia; Ng, Shu Wen; Popkin, Barry M

2015-01-01

Introduction Little is known about where households shop for packaged foods, what foods and beverages they purchase, and the nutrient content of these purchases. The objectives are to describe volume trends and nutrient content (food groups and nutrient profiles) of household packaged foods purchases (PFP) by store-type. Methods Cross-sectional analysis of US households’ food purchases (Nielsen Homescan) from 2000 to 2012 (n=652,023 household-year observations) with survey weights used for national representativeness. Household PFP trends (% volume) by store-type, household purchases of key food and beverage groups based on caloric contribution by store-type, and mean caloric and nutrient densities (sugars, saturated fat and sodium) of household PFP by store-type are analyzed. Data were collected from 2000–2012. Analyses were conducted in 2014–2015. Results The proportion of total volume of household PFP significantly increased from 2000 to 2012 for mass-merchandisers (13.1 to 23.9%), convenience-stores (3.6 to 5.9%) and warehouse-club (6.2 to 9.8%), and significantly decreased for grocery-chains (58.5 to 46.3%) and non-chain grocerys (10.3 to 5.2%). Top common sources of calories (%) from household PFP by food/beverage group include: savory snacks, grain-based desserts and regular soft-drinks. The energy, total sugar, sodium and saturated fat densities of household PFP from mass-merchandisers, warehouse-club and convenience-stores were higher, compared to grocery-stores. Conclusions PFP from stores with poorer nutrient density (more energy, total sugar, sodium and saturated fat-dense), such as warehouse-club, mass-merchandisers and convenience-stores are growing, representing a potential US public health concern. PMID:26437868

Greater prevalence of select chronic conditions among Aboriginal and South Asian participants from an ethnically diverse convenience sample of British Columbians.

PubMed

Foulds, Heather J A; Bredin, Shannon S D; Warburton, Darren E R

2012-12-01

Canadians currently experience elevated rates of chronic conditions compared with past populations, and ethnic differences in the experience of select chronic conditions have previously been identified. This investigation examined the prevalence of select chronic conditions among an ethnically diverse convenience sample of British Columbian adults. A sample of adults (≥18 years) from around the province of British Columbia, including Aboriginal (n = 991), European (n = 3650), East Asian (n = 466), and South Asian (n = 228), were evaluated. Individuals reported their personal histories of cardiovascular disease and diabetes, and physical activity behaviour. Direct measures of health status included body mass index, waist circumference, resting blood pressure, and nonfasting blood glucose, total cholesterol, high-density lipoprotein (HDL) cholesterol, and glycosylated hemoglobin A1C. All ethnic groups were found to have high rates of low HDL (>33%), physical inactivity (>31%), hypertension (>16%), and ethnic-specifically defined obesity (>23%) and abdominal obesity (>33%). Aboriginal and South Asian populations generally demonstrated higher rates of select chronic conditions. The implementation of ethnic-specific body composition recommendations further underscores this poorer health status among South Asian populations. Actions to improve chronic condition rates should be undertaken among all ethnic groups, with particular attention to Aboriginal and South Asian populations.

Open-Section Composite Structural Elements

NASA Technical Reports Server (NTRS)

Loftin, T. A.; Smith, C. A.; Raheb, S. J.; Nowitzky, A. M.

1991-01-01

Report describes investigation of manufacture and mechanical properties of graphite-fiber/aluminum-matrix open-section structural elements; e.g., channels and angle bars. Conducted with view toward using such elements to build lightweight, thermally stable truss structures in outer space. Other applications transport to, and assembly at, remote or otherwise uninviting locations. Advantages include shapes permitting high packing density during shipment, convenient paths for routing tubes, hoses, and cables; accessibility of both inner and outer surfaces for repair; and ease of attachment of additional hardware. Easier and require less equipment to fabricate, and more amenable to automated fabrication and assembly at remote site. Disadvantages, not as resistant to some kinds of deformation under load.

Household wireless electroencephalogram hat

NASA Astrophysics Data System (ADS)

Szu, Harold; Hsu, Charles; Moon, Gyu; Yamakawa, Takeshi; Tran, Binh

2012-06-01

We applied Compressive Sensing to design an affordable, convenient Brain Machine Interface (BMI) measuring the high spatial density, and real-time process of Electroencephalogram (EEG) brainwaves by a Smartphone. It is useful for therapeutic and mental health monitoring, learning disability biofeedback, handicap interfaces, and war gaming. Its spec is adequate for a biomedical laboratory, without the cables hanging over the head and tethered to a fixed computer terminal. Our improved the intrinsic signal to noise ratio (SNR) by using the non-uniform placement of the measuring electrodes to create the proximity of measurement to the source effect. We computing a spatiotemporal average the larger magnitude of EEG data centers in 0.3 second taking on tethered laboratory data, using fuzzy logic, and computing the inside brainwave sources, by Independent Component Analysis (ICA). Consequently, we can overlay them together by non-uniform electrode distribution enhancing the signal noise ratio and therefore the degree of sparseness by threshold. We overcame the conflicting requirements between a high spatial electrode density and precise temporal resolution (beyond Event Related Potential (ERP) P300 brainwave at 0.3 sec), and Smartphone wireless bottleneck of spatiotemporal throughput rate. Our main contribution in this paper is the quality and the speed of iterative compressed image recovery algorithm based on a Block Sparse Code (Baranuick et al, IEEE/IT 2008). As a result, we achieved real-time wireless dynamic measurement of EEG brainwaves, matching well with traditionally tethered high density EEG.

Toward CMOS image sensor based glucose monitoring.

PubMed

Devadhasan, Jasmine Pramila; Kim, Sanghyo

2012-09-07

Complementary metal oxide semiconductor (CMOS) image sensor is a powerful tool for biosensing applications. In this present study, CMOS image sensor has been exploited for detecting glucose levels by simple photon count variation with high sensitivity. Various concentrations of glucose (100 mg dL(-1) to 1000 mg dL(-1)) were added onto a simple poly-dimethylsiloxane (PDMS) chip and the oxidation of glucose was catalyzed with the aid of an enzymatic reaction. Oxidized glucose produces a brown color with the help of chromogen during enzymatic reaction and the color density varies with the glucose concentration. Photons pass through the PDMS chip with varying color density and hit the sensor surface. Photon count was recognized by CMOS image sensor depending on the color density with respect to the glucose concentration and it was converted into digital form. By correlating the obtained digital results with glucose concentration it is possible to measure a wide range of blood glucose levels with great linearity based on CMOS image sensor and therefore this technique will promote a convenient point-of-care diagnosis.

Effect of the method of preparation for consumption on calcium retention, calcium:phosphorus ratio, nutrient density and recommended daily allowance in fourteen vegetables.

PubMed

Słupski, Jacek; Gębczyński, Piotr; Korus, Anna; Lisiewska, Zofia

2014-06-01

The aim of this work was to evaluate calcium retention in 14 species of vegetable (from four usable groups). The material investigated consisted of raw and boiled fresh vegetables and two types of frozen product prepared for consumption after 12-month storage: one traditionally produced; the other obtained using the modified method (convenience food). The highest calcium content was found in leafy vegetables, followed (in descending order) by leguminous, root and brassica vegetables. The proportion by weight of Ca to P was highest in leafy vegetables and decreased with calcium retention despite the fact that levels of phosphorus were highest in leguminous and lowest in leafy vegetables. The nutrient density (ND%) of calcium for adults exceeded 100 for each individual vegetable species. The recommended daily allowance (RDA) percentage value varied between 23.04 (kale) and 1.46 (white cauliflower). Of the three types of product, ND and RDA values were generally greater in the frozen convenience products.

Property control of graphene aerogels by in situ growth of silicone polymer

NASA Astrophysics Data System (ADS)

Zhou, Shuai; Zhou, Xiang; Hao, Gazi; Jiang, Wei; Wang, Tianhe

2018-05-01

Modulation of the density (from 3.5 to 64 mg cm-3), hydrophobicity and oil-uptake capability of graphene aerogels in extensive ranges were achieved by reacting (3-Mercaptopropyl)trimethoxysilane (MPS) with graphene oxide solutions under heating. The reaction allowed a characteristic silicone substructure to be formed on graphene and joint the graphene layers firmly together. With the increase of MPS concentrations (≤ca. 0.2 vol%), the nano silicone polymer grown on graphene functioned as a "linker" and "spacer", leading to a substantial decrease of the aerogel density. Because of the formation of silicone polymer and the characteristic nano-micro substructures on the backbones of graphene aerogels, the graphene aerogels exhibited a high hydrophobicity with the water contact angle consistently exceeding 142 degrees. Functionalized graphene aerogels with a density of 3.5 mg cm-3 were conveniently fabricated that displayed an extraordinary oil absorption capacity, 182 times for lubricating oil and 143 times for n-hexane of its own weight. Furthermore, the aerogels maintained their ultra-high absorption capability even after 20 absorption-distillation cycles, due to structural integrity held by the strong interfacial adhesion between graphene sheets and polymer chains of aerogels. This study offers a promising graphene aerogels and also provides a strategy for fabricating extra low dense functional materials.

Association between the triglyceride to high-density lipoprotein cholesterol ratio and insulin resistance in Korean adolescents: a nationwide population-based study.

PubMed

Park, Jae-Min; Lee, Jee-Yon; Dong, Jae June; Lee, Duk-Chul; Lee, Yong-Jae

2016-11-01

Studies have suggested the triglyceride to high-density lipoprotein cholesterol ratio (TG/HDL-C) as a surrogate marker of insulin resistance. However, few studies have examined the association between TG/HDL-C and insulin resistance in the general adolescent population. This study aimed to examine the association between TG/HDL-C and insulin resistance in a nationally representative sample of Korean adolescents. A total of 2649 participants aged 12-18 years were selected from the 2007 to 2010 Korean National Health and Nutrition Examination Survey (KNHANES). Insulin resistance was defined as the homeostatic model assessment of insulin resistance (HOMA-IR) values greater than the 80th percentile. The mean values of most cardiometabolic variables increased proportionally with TG/HDL-C quartiles. Compared to individuals in the lowest TG/HDL-C quartile, the odds ratio for insulin resistance for individuals in the highest quartile was 2.91 in boys and 2.38 in girls after adjusting for confounding variables. This study suggests that TG/HDL-C could be a convenient marker for identifying Korean adolescents with insulin resistance.

NAIplot: An opensource web tool to visualize neuraminidase inhibitor (NAI) phenotypic susceptibility results using kernel density plots.

PubMed

Lytras, Theodore; Kossyvakis, Athanasios; Mentis, Andreas

2016-02-01

The results of neuraminidase inhibitor (NAI) enzyme inhibition assays are commonly expressed as 50% inhibitory concentration (IC50) fold-change values and presented graphically in box plots (box-and-whisker plots). An alternative and more informative type of graph is the kernel density plot, which we propose should be the preferred one for this purpose. In this paper we discuss the limitations of box plots and the advantages of the kernel density plot, and we present NAIplot, an opensource web application that allows convenient creation of density plots specifically for visualizing the results of NAI enzyme inhibition assays, as well as for general purposes. Copyright © 2015 Elsevier B.V. All rights reserved.

Convenience food products. Drivers for consumption.

PubMed

Brunner, Thomas A; van der Horst, Klazine; Siegrist, Michael

2010-12-01

Convenience is one of the big trends in the food business. The demand for convenience food products is steadily increasing; therefore, understanding convenience food consumption is an important issue. Despite being vital properties of convenience food, saving time and effort have not been very successful constructs for predicting convenience food consumption. To examine a wide range of possible drivers for convenience food consumption, the present study uses a convenience food frequency questionnaire that asks about consumption behavior. A paper-and-pencil questionnaire was sent out to a representative sample of people in German-speaking Switzerland and yielded N = 918 complete datasets from persons mainly responsible for buying and preparing food in the household. The various convenience food products could be categorized into four groups, which we labeled as highly processed food items, moderately processed food items, single components, and salads. Fifteen drivers were found to have a significant impact either on total convenience consumption or on one of the identified categories. Strong predictors were age, concern about naturalness, nutrition knowledge, and cooking skills. Copyright © 2010 Elsevier Ltd. All rights reserved.

Low temperature oxidation synthesis of carbon encapsulated Cr2O3 nanocrystals and its lithium storage performance

NASA Astrophysics Data System (ADS)

Zhou, Yun; Liu, Boyang; Shao, Yingfeng; Fan, Chunhua; Fan, Runhua; Wen, Bosheng

A highly efficient and convenient strategy is developed for the one-step in-situ synthesis of carbon encapsulated Cr2O3 nanocrystals with core-shell structure (Cr2O3@C). The explosive reaction of chromocene with ammonium persulfate in an autoclave at 200∘C is crucial for the formation of this nanostructure. The Cr2O3 nanocrystals have a diameter of 5 to 20nm, which are entirely encapsulated by the amorphous carbon shell. The Cr2O3@C anode can retain a stable reversible capacity of 397mAhg-1 after 50 cycles at a current density of 119mA g-1.

Combustion of liquid sprays at high pressures

NASA Technical Reports Server (NTRS)

Shearer, A. J.; Faeth, G. M.

1977-01-01

The combustion of pressure atomized fuel sprays in high pressure stagnant air was studied. Measurements were made of flame and spray boundaries at pressures in the range 0.1-9 MPa for methanol and n-pentane. At the higher test pressure levels, critical phenomena are important. The experiments are compared with theoretical predictions based on a locally homogeneous two-phase flow model. The theory correctly predicted the trends of the data, but underestimates flame and spray boundaries by 30-50 percent, indicating that slip is still important for the present experiments (Sauter mean diameters of 30 microns at atmospheric pressure under cold flow conditions). Since the sprays are shorter at high pressures, slip effects are still important even though the density ratio of the phases approach one another as the droplets heat up. The model indicates the presence of a region where condensed water is present within the spray and provides a convenient means of treating supercritical phenomena.

In situ electrostatic characterisation of ion beams in the region of ion acceleration

NASA Astrophysics Data System (ADS)

Bennet, Alexander; Charles, Christine; Boswell, Rod

2018-02-01

In situ and ex situ techniques have been used to measure directional ion beams created by a sharp axial potential drop in low pressure expanding plasmas. Although Retarding Field Energy Analysers (RFEAs) are the most convenient technique to measure the ion velocities and plasma potentials along with the plasma density, they are bulky and are contained in a grounded shield that may perturb the electric potential profile of the expanding plasma. In principle, ex situ techniques produce a more reliable measurement and Laser Induced Fluorescence spectroscopy (LIF) has previously been used to characterise the spatial velocity profile of ion beams in the same region of acceleration for a range of pressures. Here, satisfactory agreement between the ion velocity profiles measured by LIF and RFEA techniques has allowed the RFEA method to be confidently used to probe the ion beam characteristics in the regions of high gradients in plasma density and DC electric fields which have previously proven difficult.

Perceptions of meal convenience: the case of at-home evening meals.

PubMed

Jaeger, Sara R; Meiselman, Herbert L

2004-06-01

Perceptions of a range of evening meal situations eaten in the home were explored in a female consumer population. The investigation was carried out using the repertory grid technique and using written scenarios as the research stimuli. The nine scenarios successfully manipulated perceived convenience, time and effort. A consumer-generated vocabulary pertaining to food-related convenience was derived and revealed that while elements of both time and effort contributed to perceived convenience, these two 'dimensions' were highly interdependent. The presence of terms related to planning, shopping, preparation, cooking and clean-up illustrated that all stages in the food provisioning process influenced perceived convenience. Some evidence was established of perceptual differences between individuals varying with respect to convenience orientation in meal preparation.

Association Between Neighborhood Violence and Biological Stress in Children.

PubMed

Theall, Katherine P; Shirtcliff, Elizabeth A; Dismukes, Andrew R; Wallace, Maeve; Drury, Stacy S

2017-01-01

Exposure to violence continues to be a growing epidemic, particularly among children. An enhanced understanding of the biological effect of exposure to violence is critical. To examine the association between neighborhood violence and cellular and biological stress in children. A matched, cross-sectional study of 85 black children aged 5 to 16 years from 52 neighborhoods took place in the greater New Orleans, Louisiana, area between January 1, 2012, and July 31, 2013. Density of businesses where individuals can purchase alcohol as measured by rates per capita of liquor or convenience stores, and violence as measured by reports of violent crime and reports of domestic violence, operationalized as reports per capita of crime and domestic violence. Rates of exposure within a 500-, 1000-, and 2000-m radius from the child's home were calculated. Primary biological outcomes were telomere length and cortisol functioning. Among the 85 children in the study, (mean [SD] age, 9.8 [3.1] years; 50 girls and 35 boys) significant variation in telomere length and cortisol functioning was observed at the neighborhood level, with intraclass correlation coefficients of 6% for telomere length, 3.4% for waking cortisol levels, and 5.5% for peak cortisol levels following a stressor. Density of liquor or convenience stores within a 500-m radius of a child's home was associated with a decrease in mean telomere length by 0.004 for each additional liquor store or convenience store (β [SE], -0.004 [0.002]; P = .02). The rate of domestic violence was significantly and inversely associated with a decrease in mean telomere length by 0.007 for each additional report of domestic violence in a 500-m radius of a child's home (β [SE], -0.007 [0.001]; P < .001). The rate of violent crime was significantly associated with a decrease in mean telomere length by 0.006 for each additional report of violent crime in a 500-m radius of a child's home (β [SE], -0.006 [0.002]; P < .001). Children exposed to more liquor and convenience stores within 500 m of their home were significantly less likely to reduce cortisol levels after a reactivity test (β, 0.029; P = .047), as were children exposed to high rates of domestic violence (β, 0.088; P = .12) and violent crime (β, 0.029; P = .006). Children exposed to more liquor and convenience stores within 500 m of their home had a steeper diurnal decline in cortisol levels during the day (β [SE], -0.002 [0.001]; P = .04), as did children exposed to more violent crime within 500 m of their home (β [SE] -0.032 [0.014]; P = .02). Neighborhoods are important targets for interventions to reduce the effect of exposure to violence in the lives of children. These findings provide the first evidence that objective exposures to neighborhood-level violence influence both physiological and cellular markers of stress, even in children.

Geographic Information Systems to Assess External Validity in Randomized Trials.

PubMed

Savoca, Margaret R; Ludwig, David A; Jones, Stedman T; Jason Clodfelter, K; Sloop, Joseph B; Bollhalter, Linda Y; Bertoni, Alain G

2017-08-01

To support claims that RCTs can reduce health disparities (i.e., are translational), it is imperative that methodologies exist to evaluate the tenability of external validity in RCTs when probabilistic sampling of participants is not employed. Typically, attempts at establishing post hoc external validity are limited to a few comparisons across convenience variables, which must be available in both sample and population. A Type 2 diabetes RCT was used as an example of a method that uses a geographic information system to assess external validity in the absence of a priori probabilistic community-wide diabetes risk sampling strategy. A geographic information system, 2009-2013 county death certificate records, and 2013-2014 electronic medical records were used to identify community-wide diabetes prevalence. Color-coded diabetes density maps provided visual representation of these densities. Chi-square goodness of fit statistic/analysis tested the degree to which distribution of RCT participants varied across density classes compared to what would be expected, given simple random sampling of the county population. Analyses were conducted in 2016. Diabetes prevalence areas as represented by death certificate and electronic medical records were distributed similarly. The simple random sample model was not a good fit for death certificate record (chi-square, 17.63; p=0.0001) and electronic medical record data (chi-square, 28.92; p<0.0001). Generally, RCT participants were oversampled in high-diabetes density areas. Location is a highly reliable "principal variable" associated with health disparities. It serves as a directly measurable proxy for high-risk underserved communities, thus offering an effective and practical approach for examining external validity of RCTs. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Investigation of measurement method of saturation magnetization of iron core material using electromagnet

NASA Astrophysics Data System (ADS)

Shibataki, Takuya; Takahashi, Yasuhito; Fujiwara, Koji

2018-04-01

This paper discusses a measurement method for saturation magnetizations of iron core materials using an electromagnet, which can apply an extremely large magnetic field strength to a specimen. It is said that electrical steel sheets are completely saturated at such a large magnetic field strength over about 100 kA/m. The saturation magnetization can be obtained by assuming that the completely saturated specimen shows a linear change of the flux density with the magnetic field strength because the saturation magnetization is constant. In order to accurately evaluate the flux density in the specimen, an air flux between the specimen and a winding of B-coil for detecting the flux density is compensated by utilizing an ideal condition that the incremental permeability of saturated specimen is equal to the permeability of vacuum. An error of magnetic field strength caused by setting a sensor does not affect the measurement accuracy of saturation magnetization. The error is conveniently cancelled because the saturation magnetization is a function of a ratio of the magnetic field strength to its increment. It may be concluded that the saturation magnetization can be easily measured with high accuracy by using the proposed method.

Superfluid transition of homogeneous and trapped two-dimensional Bose gases.

PubMed

Holzmann, Markus; Baym, Gordon; Blaizot, Jean-Paul; Laloë, Franck

2007-01-30

Current experiments on atomic gases in highly anisotropic traps present the opportunity to study in detail the low temperature phases of two-dimensional inhomogeneous systems. Although, in an ideal gas, the trapping potential favors Bose-Einstein condensation at finite temperature, interactions tend to destabilize the condensate, leading to a superfluid Kosterlitz-Thouless-Berezinskii phase with a finite superfluid mass density but no long-range order, as in homogeneous fluids. The transition in homogeneous systems is conveniently described in terms of dissociation of topological defects (vortex-antivortex pairs). However, trapped two-dimensional gases are more directly approached by generalizing the microscopic theory of the homogeneous gas. In this paper, we first derive, via a diagrammatic expansion, the scaling structure near the phase transition in a homogeneous system, and then study the effects of a trapping potential in the local density approximation. We find that a weakly interacting trapped gas undergoes a Kosterlitz-Thouless-Berezinskii transition from the normal state at a temperature slightly below the Bose-Einstein transition temperature of the ideal gas. The characteristic finite superfluid mass density of a homogeneous system just below the transition becomes strongly suppressed in a trapped gas.

Convenience food in the diet of children and adolescents: consumption and composition.

PubMed

Alexy, Ute; Sichert-Hellert, Wolfgang; Rode, Tabea; Kersting, Mathilde

2008-02-01

Despite an increasing trend towards the use of convenience food, there is to date little debate on it in the nutritional sciences. In the present study, we present and evaluate data on consumption frequencies and composition of savoury convenience food in German families using data from the Dortmund Nutritional and Anthropometric Longitudinally Designed (DONALD) Study. The DONALD Study is an ongoing, longitudinal (open cohort) study (started 1985), collecting detailed data on diet, development, and metabolism in infants, children and adolescents. Dietary intake was measured by yearly repeated 3 d weighed dietary records (n 1558) in 554 subjects (278 boys; 276 girls), 3-18 years old, between 2003 and 2006. A total of 1345 (86%) 3 d dietary records mentioned consumption of at least one convenience food. Convenience food consumption (percentage of total food intake, g/d) increased with age from approximately 3% in the 3-8 year olds to 7% in 14-18-year-old boys and 5% in 14-18-year-old girls (P < 0.0001) but remained constant during the study period. Convenience foods contributed more to total fat (g/d) (P < 0.001) and less to total carbohydrate (P < 0.0001) than to total energy (kJ/d) intake. The 700 convenience-food products recorded by our sample had on average fourteen ingredients; 4% were flavourings and 16% were food additives. In conclusion, convenience foods were widely consumed by our sample of German children and adolescents and their consumption increased with age. The composition of convenience food was characterised by a high fat content and a high number of flavourings and food additives.

Pellet injection research on the HT-6M and HT-7 tokamaks

NASA Astrophysics Data System (ADS)

Yang, Yu; Bao, Yi; Li, Jiangang; Gu, Xuemao; He, Yexi

1999-11-01

A multishot in situ pellet injection system has been constructed in the Institute of Plasma Physics. Single- and multi-pellet injection experiments were performed on the HT-6M and superconducting HT-7 tokamaks. The system proved to be convenient and reliable to operate. Pellets were fired into ohmically and LHCD and ICRF heated plasmas. Single pellet injection in ohmic discharge was found to increase the central density of HT-7 by about one half, while two pellet injection increased the central density in a step-like fashion by one half with each shot. Peaking of the electron density profile and a hollow electron temperature profile were obtained.

High-Density Dielectrophoretic Microwell Array for Detection, Capture, and Single-Cell Analysis of Rare Tumor Cells in Peripheral Blood.

PubMed

Morimoto, Atsushi; Mogami, Toshifumi; Watanabe, Masaru; Iijima, Kazuki; Akiyama, Yasuyuki; Katayama, Koji; Futami, Toru; Yamamoto, Nobuyuki; Sawada, Takeshi; Koizumi, Fumiaki; Koh, Yasuhiro

2015-01-01

Development of a reliable platform and workflow to detect and capture a small number of mutation-bearing circulating tumor cells (CTCs) from a blood sample is necessary for the development of noninvasive cancer diagnosis. In this preclinical study, we aimed to develop a capture system for molecular characterization of single CTCs based on high-density dielectrophoretic microwell array technology. Spike-in experiments using lung cancer cell lines were conducted. The microwell array was used to capture spiked cancer cells, and captured single cells were subjected to whole genome amplification followed by sequencing. A high detection rate (70.2%-90.0%) and excellent linear performance (R2 = 0.8189-0.9999) were noted between the observed and expected numbers of tumor cells. The detection rate was markedly higher than that obtained using the CellSearch system in a blinded manner, suggesting the superior sensitivity of our system in detecting EpCAM- tumor cells. Isolation of single captured tumor cells, followed by detection of EGFR mutations, was achieved using Sanger sequencing. Using a microwell array, we established an efficient and convenient platform for the capture and characterization of single CTCs. The results of a proof-of-principle preclinical study indicated that this platform has potential for the molecular characterization of captured CTCs from patients.

Hydroxytyrosol in functional hydroxytyrosol-enriched biscuits is highly bioavailable and decreases oxidised low density lipoprotein levels in humans.

PubMed

Mateos, Raquel; Martínez-López, Sara; Baeza Arévalo, Gema; Amigo-Benavent, Miryam; Sarriá, Beatriz; Bravo-Clemente, Laura

2016-08-15

Hydroxytyrosol (HT) and its derivatives in olive oil protect low-density lipoproteins (LDL) against oxidation. Biscuits could be a convenient alternative to broaden consumers' choice of HT-rich foods, although the biscuit matrix could affect HT bioavailability. We performed a crossover, randomized, double-blind study to evaluate HT bioavailability in HT-enriched biscuits (HT-B) versus non-enriched biscuits (C-B), and the effects on oxidative postprandial status. On two separate days, 13 subjects consumed 30 g of C-B or HT-B (5.25mg HT) after overnight-fasting. Blood and urine were collected at different intervals and analysed by LC-MS-QToF. After HT-B consumption, plasma metabolites peaked between 0.5 and 1h and were extensively excreted in urine. HT-sulphate and 3,4-dihydroxyphenylacetic acid (DOPAC)-sulphate were the main metabolites, followed by DOPAC and homovanillic acid (HVA). HT-glucuronide, DOPAC-glucuronide, HVA-glucuronide and HVA-sulphate were also detected. Postprandial oxidised-LDL concentrations decreased with HT-B. HT is a promising functional ingredient and, in biscuits, it is highly bioavailable and lowers postprandial oxidised-LDL levels. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigation of the relationship between convenient visits and doctors' fatigue using burnout and work engagement scales.

PubMed

Matsumoto, Yuuki; Hoshiko, Michiko; Morimatsu, Yoshitaka; Mori, Mihoko; Kushino, Nanae; Ishitake, Tatsuya

2015-01-01

Fatigue caused by high workload is often responsible for the high attrition among doctors, and has contributed to a disruption in community medicine. In order to address this problem, institutional mechanisms at the hospital level are required. Previous studies have shown that systemic measures at the hospital level and a change in the mindset of patients can help manage the problem. "Convenient visits" refer to emergency visits for non-emergency problems. It is an avoidable cause of high workload on doctors. Convenient visits also refer to emergency consultation for non-emergency symptoms. As this is a new phenomenon, its relationship with doctors' fatigue needs further research. We investigated the relationship between convenient visits and doctors' fatigue using burnout and work engagement scales. We selected 44 hospitals, with >200 beds each, in provincial cities of prefectures with a doctor-population ratio lower than the national average. These cities were considered likely to manifest the phenomenon of 24-hour society and include overworked doctors. Ordinance-designated cities were excluded from this study owing to wide population variability. Three doctors from each hospital were randomly selected from among physicians, surgeons, and pediatricians. We distributed questionnaires (a questionnaire concerning convenient visits, Maslach Burnout Inventory-Human Services Survey, and Utrecht Work Engagement Scale) to 132 doctors. Forty-two doctors responded to the survey. The median proportion of convenient visits among emergency visits was 50%. Sixty percent of the doctors surveyed were annoyed by convenient visits. Other doctors indicated good collaboration between the hospitals and communities or that they were not currently annoyed by convenient visits, although they had been annoyed previously. The emotional exhaustion in doctors, who worked in hospitals that did not restrict convenient visits, was significantly higher than in those who worked in hospitals that restricted these visits. A significant risk of serious burnout was found via crude and multiple logistic regression analysis (adjusted for age and gender, or adjusted for age, gender, clinical department, frequency of work shifts, and sleep duration during work shifts). Doctors working in hospitals that do not protect them against convenient visits are more prone to burnout. Although the number of convenient visitors is increasing, many hospitals lack systemic measures to manage them. This contributes to doctors' burnout. We suggest that hospitals control convenient visits for preventing doctors' burnout. Collaboration between hospitals and communities is required to help alleviate this problem.

Collective space of high-rise housing complex

NASA Astrophysics Data System (ADS)

Bakaeva, Tatyana

2018-03-01

The article considers the problems of support of citizens a comfortable living environment in the conditions of the limited territory of the megalopolis, the typological principles of formation of space-planning structure high-rise residence complexes with public space. The collective space for residents of high-rise housing estates on the example of international experience of design and construction is in detail considered. The collective space and the area of the standard apartment are analysed on comfort classes: a social - complex Pinnacle @ Duxton, a business - Monde Condos and an elite - Hamilton Scotts. Interdependence the area of the standard flat and the total area of housing collective space, in addiction on the comfort level, is revealed. In the conditions of high-density urban development, the collective space allows to form the comfortable environment for accommodation. The recommendations for achievement of integrity and improvement of quality of the city environment are made. The convenient collective space makes a contribution to civil policy, it creates the socializing sense of interaction of residents, coagulates social effect.

Satellite detection of smoke plumes and inadvertant weather modification

Treesearch

Wayne A. Pettyjohn; John B. McKeon

1976-01-01

Satellite imagery provides a convenient and inexpensive means for monitoring smoke plumes and evaluating inadvertant weather modification. Visual examination of LANDSAT-1 imagery for two sites in east-central Ohio indicates that, at times, a plume may extend nearly 48 km downwind and reach a width of six km. Density slicing techniques provide clues as to the...

Guided growth of large-scale, horizontally aligned arrays of single-walled carbon nanotubes and their use in thin-film transistors.

PubMed

Kocabas, Coskun; Hur, Seung-Hyun; Gaur, Anshu; Meitl, Matthew A; Shim, Moonsub; Rogers, John A

2005-11-01

A convenient process for generating large-scale, horizontally aligned arrays of pristine, single-walled carbon nanotubes (SWNTs) is described. The approach uses guided growth, by chemical vapor deposition (CVD), of SWNTs on miscut single-crystal quartz substrates. Studies of the growth reveal important relationships between the density and alignment of the tubes, the CVD conditions, and the morphology of the quartz. Electrodes and dielectrics patterned on top of these arrays yield thin-film transistors that use the SWNTs as effective thin-film semiconductors. The ability to build high-performance devices of this type suggests significant promise for large-scale aligned arrays of SWNTs in electronics, sensors, and other applications.

Computer programs for thermodynamic and transport properties of hydrogen (tabcode-II)

NASA Technical Reports Server (NTRS)

Roder, H. M.; Mccarty, R. D.; Hall, W. J.

1972-01-01

The thermodynamic and transport properties of para and equilibrium hydrogen have been programmed into a series of computer routines. Input variables are the pair's pressure-temperature and pressure-enthalpy. The programs cover the range from 1 to 5000 psia with temperatures from the triple point to 6000 R or enthalpies from minus 130 BTU/lb to 25,000 BTU/lb. Output variables are enthalpy or temperature, density, entropy, thermal conductivity, viscosity, at constant volume, the heat capacity ratio, and a heat transfer parameter. Property values on the liquid and vapor boundaries are conveniently obtained through two small routines. The programs achieve high speed by using linear interpolation in a grid of precomputed points which define the surface of the property returned.

M.S.L.A.P. Modular Spectral Line Analysis Program documentation

NASA Technical Reports Server (NTRS)

Joseph, Charles L.; Jenkins, Edward B.

1991-01-01

MSLAP is a software for analyzing spectra, providing the basic structure to identify spectral features, to make quantitative measurements of this features, and to store the measurements for convenient access. MSLAP can be used to measure not only the zeroth moment (equivalent width) of a profile, but also the first and second moments. Optical depths and the corresponding column densities across the profile can be measured as well for sufficiently high resolution data. The software was developed for an interactive, graphical analysis where the computer carries most of the computational and data organizational burden and the investigator is responsible only for all judgement decisions. It employs sophisticated statistical techniques for determining the best polynomial fit to the continuum and for calculating the uncertainties.

Examining the relationship between the food environment and adult diabetes prevalence by county economic and racial composition: an ecological study.

PubMed

Haynes-Maslow, Lindsey; Leone, Lucia A

2017-08-09

Inequitable access to healthy food may contribute to health disparities. This study examines the relationship between the prevalence of adult diabetes and food access in the U.S. by county economic/racial composition. An ecological study from 2012 was used to estimate the relationship between diabetes and retail food outlet access. County diabetes prevalence was measured based on individual responses to the Behavioral Risk Factor Surveillance Survey question, "Have you ever been told by a doctor that you have diabetes?" If the answer was "yes" individuals were classified as having diabetes. Retail food outlets included grocery stores, supercenters, farmer's markets, full-service restaurants, fast food restaurants and convenience stores. Counties were categorized as "high-poverty" or "low-poverty". Counties were categorized as low (< 4.6%), medium (4.6%-31.0%), and high (> 31.0%) percent minority residents. Multiple linear regression models estimated the association between retail food outlets and diabetes, controlling for confounders, and testing for interactions between retail food outlets and county racial composition. Regression models were conditioned on county economic composition. Data were analyzed in 2016. Density of retail foods outlets varied greatly by county economic and racial composition; counties with medium-minority populations had the least access to grocery stores and the highest access to fast food restaurants and convenience stores. Low poverty/low-minority population counties had the greatest access to farmer's markets and grocery stores. For low poverty/low-minority counties, grocery stores were associated with decreased of diabetes prevalence. Supercenters were associated with an increase in diabetes prevalence for high-poverty/low-minority counties. Only low poverty/medium-minority counties had a statistically significant relationship between farmer's markets and diabetes prevalence. Fast food restaurants were found to be positively associated with diabetes prevalence in all counties except high poverty/medium-minority. However, only low poverty/low-minority counties had a statistically significant relationship. Across all models, access to full service restaurants were significantly associated with lower prevalence of diabetes. Generally, access to convenience stores were associated with increased diabetes prevalence, except for high poverty/low-minority counties. The food environment is more strongly associated with diabetes prevalence for wealthier counties with a lower proportion of minority residents. This is important given efforts to increase food access in vulnerable communities. Availability of healthier food may not be enough to change health outcomes.

Rapid and Convenient Separation of Chitooligosaccharides by Ion-Exchange Chromatography

NASA Astrophysics Data System (ADS)

Wu, Yuxiao; Lu, Wei-Peng; Wang, Jianing; Gao, Yunhua; Guo, Yanchuan

2017-12-01

Pervious methods for separation of highly purified chitooligosaccharides was time-consuming and labor-intensive, which limited the large-scale production. This study developed a convenient ion-exchange chromatography using the ÄKTA™ avant 150 chromatographic system. Five fractions were automatically collected under detecting the absorption at 210 nm. The fractions were analyzed by high-performance liquid chromatography. It proved that they primarily comprised chitobiose, chitotriose, chitotetraose, chitopentaose, and chitohexaose, respectively, with chromatographic purities over 90%. The separation process was rapid, convenient and could be monitored on-line, which would be benefit for the mass production of chitooligosaccharides.

Ruthenium-cobalt nanoalloys encapsulated in nitrogen-doped graphene as active electrocatalysts for producing hydrogen in alkaline media

NASA Astrophysics Data System (ADS)

Su, Jianwei; Yang, Yang; Xia, Guoliang; Chen, Jitang; Jiang, Peng; Chen, Qianwang

2017-04-01

The scalable production of hydrogen could conveniently be realized by alkaline water electrolysis. Currently, the major challenge confronting hydrogen evolution reaction (HER) is lacking inexpensive alternatives to platinum-based electrocatalysts. Here we report a high-efficient and stable electrocatalyst composed of ruthenium and cobalt bimetallic nanoalloy encapsulated in nitrogen-doped graphene layers. The catalysts display remarkable performance with low overpotentials of only 28 and 218 mV at 10 and 100 mA cm-2, respectively, and excellent stability of 10,000 cycles. Ruthenium is the cheapest platinum-group metal and its amount in the catalyst is only 3.58 wt.%, showing the catalyst high activity at a very competitive price. Density functional theory calculations reveal that the introduction of ruthenium atoms into cobalt core can improve the efficiency of electron transfer from alloy core to graphene shell, beneficial for enhancing carbon-hydrogen bond, thereby lowing ΔGH* of HER.

Quantitative X-ray - UV Line and Continuum Spectroscopy with Application to AGN: State-Specific Hydrogenic Recombination Cooling Coefficients for a Wide Range of Conditions

NASA Technical Reports Server (NTRS)

LaMothe, J.; Ferland, Gary J.

2002-01-01

Recombination cooling, in which a free electron emits light while being captured to an ion, is an important cooling process in photoionized clouds that are optically thick or have low metallicity. State specific rather than total recombination cooling rates are needed since the hydrogen atom tends to become optically thick in high-density regimes such as Active Galactic Nuclei. This paper builds upon previous work to derive the cooling rate over the full temperature range where the process can be a significant contributor in a photoionized plasma. We exploit the fact that the recombination and cooling rates are given by intrinsically similar formulae to express the cooling rate in terms of the closely related radiative recombination rate. We give an especially simple but accurate approximation that works for any high hydrogenic level and can be conveniently employed in large-scale numerical simulations.

Electrolyte solutions at curved electrodes. I. Mesoscopic approach

NASA Astrophysics Data System (ADS)

Reindl, Andreas; Bier, Markus; Dietrich, S.

2017-04-01

Within the Poisson-Boltzmann approach, electrolytes in contact with planar, spherical, and cylindrical electrodes are analyzed systematically. The dependences of their capacitance C on the surface charge density σ and the ionic strength I are examined as a function of the wall curvature. The surface charge density has a strong effect on the capacitance for small curvatures, whereas for large curvatures the behavior becomes independent of σ. An expansion for small curvatures gives rise to capacitance coefficients which depend only on a single parameter, allowing for a convenient analysis. The universal behavior at large curvatures can be captured by an analytic expression.

REACTOR MONITORING

DOEpatents

Bugbee, S.J.; Hanson, V.F.; Babcock, D.F.

1959-02-01

A neutron density inonitoring means for reactors is described. According to this invention a tunnel is provided beneath and spaced from the active portion of the reactor and extends beyond the opposite faces of the activc portion. Neutron beam holes are provided between the active portion and the tunnel and open into the tunnel near the middle thereof. A carriage operates back and forth in the tunnel and is adapted to convey a neutron detector, such as an ion chamber, and position it beneath one of the neutron beam holes. This arrangement affords convenient access of neutron density measuring instruments to a location wherein direct measurement of neutron density within the piles can be made and at the same time affords ample protection to operating personnel.

A projection operator method for the analysis of magnetic neutron form factors

NASA Astrophysics Data System (ADS)

Kaprzyk, S.; Van Laar, B.; Maniawski, F.

1981-03-01

A set of projection operators in matrix form has been derived on the basis of decomposition of the spin density into a series of fully symmetrized cubic harmonics. This set of projection operators allows a formulation of the Fourier analysis of magnetic form factors in a convenient way. The presented method is capable of checking the validity of various theoretical models used for spin density analysis up to now. The general formalism is worked out in explicit form for the fcc and bcc structures and deals with that part of spin density which is contained within the sphere inscribed in the Wigner-Seitz cell. This projection operator method has been tested on the magnetic form factors of nickel and iron.

A rate-compatible family of protograph-based LDPC codes built by expurgation and lengthening

NASA Technical Reports Server (NTRS)

Dolinar, Sam

2005-01-01

We construct a protograph-based rate-compatible family of low-density parity-check codes that cover a very wide range of rates from 1/2 to 16/17, perform within about 0.5 dB of their capacity limits for all rates, and can be decoded conveniently and efficiently with a common hardware implementation.

Food nanotechnology: water is the key to lowering the energy density of processed foods.

PubMed

Robson, A A

2011-01-01

It is crucial that emergent technologies create foods that help prevent the causal mechanisms of the diet induced disease epidemic. Food nanotechnology could create modem convenience foods that mimic and improve on the nutritional value of the most nutritious cooked wild foods for humans. Structuring a solid processed food similar to a celery stalk using self-assembled, water-filled, edible nanocells or nanotubes would substantially lower its energy density (<1.6 kcal g(-1)). Food technologists could harness the natural turgor force to produce a firm chocolate bar, biscuit or breakfast cereal with a good bite, without altering the appearance or taste of the product. Water carries flavour with few calories, and taste sensation per mouthful could be improved by processing food on the nanoscale to increase the surface area that is in contact with taste and smell receptors. The bioavailable nutrient content (including cofactors) of processed foods could be increased by existing bioactive nanoencapsulation. This would allow people to continue to consume modern convenience food on a mass scale, while simultaneously and significantly increasing nutrient intake and reducing energy intake per day. Thus, helping to reduce mental ill health, obesity and other postprandial insults.

Effective NaBH4-exfoliated ultrathin multilayer Co(OH)2 nanosheets arrays and sulfidation for energy storage

NASA Astrophysics Data System (ADS)

Yang, Wanjun; Qu, Gan; Chen, Mingyue; Ma, Wenhao; Li, Wenhui; Tang, Yiwen

2018-07-01

Facile engineering ultrathin nano structural materials is still a huge challenge for material science. Thereinto, the strategy of exfoliating shows great advantages. In this work, we develop a convenient approach to exfoliate Co(OH)2 nanosheets into ultrathin Co(OH)2 nanoflakes through NaBH4-exfoliation method. Moreover, the microstructures of the Co(OH)2 nanosheets are conveniently controlled by varying the exfoliation time. As a result, the obtained ultrathin Co(OH)2-72 h nanosheets deliver the excellent electrochemical performance. In order to improve the energy storage properties, the obtained ultrathin Co(OH)2 nanosheets are further modified to enhance the conductivity via sulfidation. Consequently, the synthesized Co(OH)2-72 h/CoS2 composites exhibit a specific capacitance of 2536 F g‑1 at 1 A g‑1, which is more outstanding than that of Co(OH)2-72 h. What’s more, the Co(OH)2-72 h/CoS2 composites show a capacitance retention of 83.3% after 10 000 cycles. Besides, the assembled asymmetric supercapacitor displays a power density of 482 W kg‑1 at an energy density of 36 Wh kg‑1, demonstrating a large potential for application.

Acoustic characterisation of liquid foams with an impedance tube.

PubMed

Pierre, Juliette; Guillermic, Reine-Marie; Elias, Florence; Drenckhan, Wiebke; Leroy, Valentin

2013-10-01

Acoustic measurements provide convenient non-invasive means for the characterisation of materials. We show here for the first time how a commercial impedance tube can be used to provide accurate measurements of the velocity and attenuation of acoustic waves in liquid foams, as well as their effective "acoustic" density, over the 0.5-6kHz frequency range. We demonstrate this using two types of liquid foams: a commercial shaving foam and "home-made" foams with well-controlled physico-chemical and structural properties. The sound velocity in the latter foams is found to be independent of the bubble size distribution and is very well described by Wood's law. This implies that the impedance technique may be a convenient way to measure in situ the density of liquid foams. Important questions remain concerning the acoustic attenuation, which is found to be influenced in a currently unpredictible manner by the physico-chemical composition and the bubble size distribution of the characterised foams. We confirm differences in sound velocities in the two types of foams (having the same structural properties) which suggests that the physico-chemical composition of liquid foams has a non-negligible effect on their acoustic properties.

Effective NaBH4-exfoliated ultrathin multilayer Co(OH)2 nanosheets arrays and sulfidation for energy storage.

PubMed

Yang, Wanjun; Qu, Gan; Chen, Mingyue; Ma, Wenhao; Li, Wenhui; Tang, Yiwen

2018-07-20

Facile engineering ultrathin nano structural materials is still a huge challenge for material science. Thereinto, the strategy of exfoliating shows great advantages. In this work, we develop a convenient approach to exfoliate Co(OH) 2 nanosheets into ultrathin Co(OH) 2 nanoflakes through NaBH 4 -exfoliation method. Moreover, the microstructures of the Co(OH) 2 nanosheets are conveniently controlled by varying the exfoliation time. As a result, the obtained ultrathin Co(OH) 2 -72 h nanosheets deliver the excellent electrochemical performance. In order to improve the energy storage properties, the obtained ultrathin Co(OH) 2 nanosheets are further modified to enhance the conductivity via sulfidation. Consequently, the synthesized Co(OH) 2 -72 h/CoS 2 composites exhibit a specific capacitance of 2536 F g -1 at 1 A g -1 , which is more outstanding than that of Co(OH) 2 -72 h. What's more, the Co(OH) 2 -72 h/CoS 2 composites show a capacitance retention of 83.3% after 10 000 cycles. Besides, the assembled asymmetric supercapacitor displays a power density of 482 W kg -1 at an energy density of 36 Wh kg -1 , demonstrating a large potential for application.

RadVel: The Radial Velocity Modeling Toolkit

NASA Astrophysics Data System (ADS)

Fulton, Benjamin J.; Petigura, Erik A.; Blunt, Sarah; Sinukoff, Evan

2018-04-01

RadVel is an open-source Python package for modeling Keplerian orbits in radial velocity (RV) timeseries. RadVel provides a convenient framework to fit RVs using maximum a posteriori optimization and to compute robust confidence intervals by sampling the posterior probability density via Markov Chain Monte Carlo (MCMC). RadVel allows users to float or fix parameters, impose priors, and perform Bayesian model comparison. We have implemented real-time MCMC convergence tests to ensure adequate sampling of the posterior. RadVel can output a number of publication-quality plots and tables. Users may interface with RadVel through a convenient command-line interface or directly from Python. The code is object-oriented and thus naturally extensible. We encourage contributions from the community. Documentation is available at http://radvel.readthedocs.io.

Association Between Neighborhood Violence and Biological Stress in Children

PubMed Central

Theall, Katherine P.; Shirtcliff, Elizabeth A.; Dismukes, Andrew R.; Wallace, Maeve; Drury, Stacy S.

2017-01-01

IMPORTANCE Exposure to violence continues to be a growing epidemic, particularly among children. An enhanced understanding of the biological effect of exposure to violence is critical. OBJECTIVE To examine the association between neighborhood violence and cellular and biological stress in children. DESIGN, SETTING, AND PARTICIPANTS A matched, cross-sectional study of 85 black children aged 5 to 16 years from 52 neighborhoods took place in the greater New Orleans, Louisiana, area between January 1, 2012, and July 31, 2013. EXPOSURES Density of businesses where individuals can purchase alcohol as measured by rates per capita of liquor or convenience stores, and violence as measured by reports of violent crime and reports of domestic violence, operationalized as reports per capita of crime and domestic violence. Rates of exposure within a 500-, 1000-, and 2000-m radius from the child’s home were calculated. MAIN OUTCOMES AND MEASURES Primary biological outcomes were telomere length and cortisol functioning. RESULTS Among the 85 children in the study, (mean [SD] age, 9.8 [3.1] years; 50 girls and 35 boys) significant variation in telomere length and cortisol functioning was observed at the neighborhood level, with intraclass correlation coefficients of 6% for telomere length, 3.4% for waking cortisol levels, and 5.5% for peak cortisol levels following a stressor. Density of liquor or convenience stores within a 500-m radius of a child’s home was associated with a decrease in mean telomere length by 0.004 for each additional liquor store or convenience store (β [SE], −0.004 [0.002]; P = .02). The rate of domestic violence was significantly and inversely associated with a decrease in mean telomere length by 0.007 for each additional report of domestic violence in a 500-m radius of a child’s home (β [SE], −0.007 [0.001]; P < .001). The rate of violent crime was significantly associated with a decrease in mean telomere length by 0.006 for each additional report of violent crime in a 500-m radius of a child’s home (β [SE], −0.006 [0.002]; P < .001). Children exposed to more liquor and convenience stores within 500 m of their home were significantly less likely to reduce cortisol levels after a reactivity test (β, 0.029; P = .047), as were children exposed to high rates of domestic violence (β, 0.088; P = .12) and violent crime (β. 0.029; P = .006). Children exposed to more liquor and convenience stores within 500 m of their home had a steeper diurnal decline in cortisol levels during the day (β [SE], −0.002 [0.001]; P = .04), as did children exposed to more violent crime within 500 m of their home (β [SE] −0.032 [0.014]; P = .02). CONCLUSIONS AND RELEVANCE Neighborhoods are important targets for interventions to reduce the effect of exposure to violence in the lives of children. These findings provide the first evidence that objective exposures to neighborhood-level violence influence both physiological and cellular markers of stress, even in children. PMID:27842189

Examination of the relationship between the working conditions of young workers and the content of the meals they buy at convenience stores.

PubMed

Miyagoshi, Miki; Otsuka, Mika; Kato, Megumi; Kubo, Chiharu; Tsuchihashi, Kayoko; Toyoshima, Hiromi; Miyazaki, Eriko; Yoshie, Ayumu; Okura, Mika; Omote, Shizuko; Kido, Teruhiko

2008-05-01

The aim of this study was to investigate the relationship between the working conditions of young workers and the meals they buy at convenience stores, and to consider the prevention of obesity. The subjects of this study were 284 workers under 29 yr of age employed at a transportation company in Ishikawa prefecture. Questionnaires were sent to participants, and 193 valid responses were obtained. Working types, night duty and working time were correlated with convenience store patronage, although working situations were not obviously associated with the content of meal selection at convenience stores. The study results revealed a tendency for the proportion of the fat in meals to be greater than 25% for the majority of working situations. It was also shown that foods selected with high frequency contained a high proportion of fat. There results suggest that this situation increases the risk of obesity. In addition, the more days per week convenience stores were patronized, the greater the number of participants felt "The need to improve meals." Therefore, we believe it is essential that young workers consider the prevention of obesity by observing nutritional information when selecting foods. An environment in which such information is easy to obtain at convenience stores should be arranged.

The Influence of Perceived Convenience and Curiosity on Continuance Intention in Mobile English Learning for High School Students Using PDAs

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Tseng, Kuo-Hung; Liang, Chaoyun; Yan, Chi-Fang

2013-01-01

Mobile learning aims to utilise communication devices such as mobile devices and wireless connection in combination with e-learning systems, allowing learners to experience convenient, instant and suitable learning at unrestricted time and place. Participants were 125 Taiwanese senior high school students, whose continuance intention was examined…

Metal coordination polymer derived mesoporous Co3O4 nanorods with uniform TiO2 coating as advanced anodes for lithium ion batteries.

PubMed

Geng, Hongbo; Ang, Huixiang; Ding, Xianguang; Tan, Huiteng; Guo, Guile; Qu, Genlong; Yang, Yonggang; Zheng, Junwei; Yan, Qingyu; Gu, Hongwei

2016-02-07

In this work, a one-dimensional Co3O4@TiO2 core-shell electrode material with superior electrochemical performance is fabricated by a convenient and controllable route. The approach involves two main steps: the homogeneous deposition of polydopamine and TiO2 layers in sequence on the cobalt coordination polymer and the thermal decomposition of the polymer matrix. The as-prepared electrode material can achieve excellent electrochemical properties and stability as an anode material for lithium ion batteries, such as a high specific capacity of 1279 mA h g(-1), good cycling stability (around 803 mA h g(-1) at a current density of 200 mA g(-1) after 100 cycles), and stable rate performance (around 520 mA h g(-1) at a current density of 1000 mA g(-1)). This dramatic electrochemical performance is mainly attributed to the excellent structural characteristics, which could improve the electrical conductivity and lithium ion mobility, as well as electrolyte permeability and architectural stability during cycling.

Multi-Skyrmions on AdS2 × S2, rational maps and popcorn transitions

NASA Astrophysics Data System (ADS)

Canfora, Fabrizio; Tallarita, Gianni

2017-08-01

By combining two different techniques to construct multi-soliton solutions of the (3 + 1)-dimensional Skyrme model, the generalized hedgehog and the rational map ansatz, we find multi-Skyrmion configurations in AdS2 ×S2. We construct Skyrmionic multi-layered configurations such that the total Baryon charge is the product of the number of kinks along the radial AdS2 direction and the degree of the rational map. We show that, for fixed total Baryon charge, as one increases the charge density on ∂ (AdS2 ×S2) , it becomes increasingly convenient energetically to have configurations with more peaks in the radial AdS2 direction but a lower degree of the rational map. This has a direct relation with the so-called holographic popcorn transitions in which, when the charge density is high, multi-layered configurations with low charge on each layer are favored over configurations with few layers but with higher charge on each layer. The case in which the geometry is M2 ×S2 can also be analyzed.

The stress intensity factors for a periodic array of interacting coplanar penny-shaped cracks

PubMed Central

Lekesiz, Huseyin; Katsube, Noriko; Rokhlin, Stanislav I.; Seghi, Robert R.

2013-01-01

The effect of crack interactions on stress intensity factors is examined for a periodic array of coplanar penny-shaped cracks. Kachanov’s approximate method for crack interactions (Int. J. Solid. Struct. 1987; 23(1):23–43) is employed to analyze both hexagonal and square crack configurations. In approximating crack interactions, the solution converges when the total truncation number of the cracks is 109. As expected, due to high density packing crack interaction in the hexagonal configuration is stronger than that in the square configuration. Based on the numerical results, convenient fitting equations for quick evaluation of the mode I stress intensity factors are obtained as a function of crack density and angle around the crack edge for both crack configurations. Numerical results for the mode II and III stress intensity factors are presented in the form of contour lines for the case of Poisson’s ratio ν =0.3. Possible errors for these problems due to Kachanov’s approximate method are estimated. Good agreement is observed with the limited number of results available in the literature and obtained by different methods. PMID:27175035

Periodic silver nanocluster arrays over large-area silica nanosphere template as highly sensitive SERS substrate

NASA Astrophysics Data System (ADS)

Hou, Xu; Wang, Qi; Mao, Guoming; Liu, Hao; Yu, Rongdi; Ren, Xiaomin

2018-04-01

Periodic Ag nanocluster arrays for surface enhanced Raman spectroscopy (SERS) were fabricated through magnetron sputtering Ag over a large-area monolayer template which is based on silica (SiO2) nanospheres. High-density nanogaps between the adjacent Ag nanoclusters acted as "hot-spots", making a dominant contribution to the high-performance SERS detection. Moreover, the nanospheres and Ag nanoclusters effectively increased the surface roughness and also enlarged the surface area of as-obtained SERS substrate, which resulted in a further enhancement in Raman signals. As-prepared SERS substrates showed very high sensitivity with the enhancement factor (EF) value of 4.1 × 1012 for Rhodamine 6G (R6G), allowing the corresponding detection limit as low as 10-16 M. Additionally, SERS signal of melamine was still strong even though its concentration was lowered to 10-7 M. Our results show that preparing highly sensitive SERS substrate with periodic Ag nanoclusters over SiO2 nanosphere template is a convenient and promising pathway for chemical and biologic sensing.

Rapid pretreatment and determination of bisphenol A in water samples based on vortex-assisted liquid-liquid microextraction followed by high-performance liquid chromatography with fluorescence detection.

PubMed

Yang, Xiao; Diao, Chun-Peng; Sun, Ai-Ling; Liu, Ren-Min

2014-10-01

A method for the rapid pretreatment and determination of bisphenol A in water samples based on vortex-assisted liquid-liquid microextraction followed by high-performance liquid chromatography with fluorescence detection was proposed in this paper. A simple apparatus consisting of a test tube and a cut-glass dropper was designed and applied to collect the floating extraction drop in liquid-liquid microextraction when low-density organic solvent was used as the extraction solvent. Solidification and melting steps that were tedious but necessary once the low-density organic solvent used as extraction solvent could be avoided by using this apparatus. Bisphenol A was selected as model pollutant and vortex-assisted liquid-liquid microextraction was employed to investigate the usefulness of the apparatus. High-performance liquid chromatography with fluorescence detection was selected as the analytical tool for the detection of bisphenol A. The linear dynamic range was from 0.10 to 100 μg/L for bisphenol A, with good squared regression coefficient (r(2) = 0.9990). The relative standard deviation (n = 7) was 4.7% and the limit of detection was 0.02 μg/L. The proposed method had been applied to the determination of bisphenol A in natural water samples and was shown to be economical, fast, and convenient. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Advances in covalent organic frameworks in separation science.

PubMed

Qian, Hai-Long; Yang, Cheng-Xiong; Wang, Wen-Long; Yang, Cheng; Yan, Xiu-Ping

2018-03-23

Covalent organic frameworks (COFs) are a new class of multifunctional crystalline organic polymer constructed with organic monomers via robust covalent bonds. The unique properties such as convenient modification, low densities, large specific surface areas, good stability and permanent porosity make COFs great potential in separation science. This review shows the state-of-the art for the application of COFs and their composites in analytical separation science. COFs and their composites have been explored as promising sorbents for solid phase extraction, potential coatings for solid phase microextraction, and novel stationary phases for gas chromatography, high-performance liquid chromatography and capillary electrochromatography. The prospects of COFs for separation science are also presented, which can offer an outlook and reference for further study on the applications of COFs. Copyright © 2018 Elsevier B.V. All rights reserved.

Magnetic stirling cycles: A new application for magnetic materials

NASA Technical Reports Server (NTRS)

Brown, G. V.

1977-01-01

The elements of the cycle are summarized. The basic advantages include high entropy density in the magnetic material, completely reversible processes, convenient control of the entropy by the applied field, the feature that heat transfer is possible during all processes, and the ability of the ideal cycle to attain Carnot efficiency. The mean field theory is used to predict the entropy of a ferromagnet in an applied field and also the isothermal entropy change and isentropic temperature change caused by applying a field. The results for isentropic temperature change are compared with experimental data on Gd. Coarse mixtures of ferromagnetic materials with different Curie points are proposed to modify the path of the cycle in the T-S diagram in order to improve the efficiency or to increase the specific power.

Significantly enhanced critical current density in nano-MgB2 grains rapidly formed at low temperature with homogeneous carbon doping

NASA Astrophysics Data System (ADS)

Liu, Yongchang; Lan, Feng; Ma, Zongqing; Chen, Ning; Li, Huijun; Barua, Shaon; Patel, Dipak; Shahriar, M.; Hossain, Al; Acar, S.; Kim, Jung Ho; Xue Dou, Shi

2015-05-01

High performance MgB2 bulks using carbon-coated amorphous boron as a boron precursor were fabricated by Cu-activated sintering at low temperature (600 °C, below the Mg melting point). Dense nano-MgB2 grains with a high level of homogeneous carbon doping were formed in these MgB2 samples. This type of microstructure can provide a stronger flux pinning force, together with depressed volatility and oxidation of Mg owing to the low-temperature Cu-activated sintering, leading to a significant improvement of critical current density (Jc) in the as-prepared samples. In particular, the value of Jc for the carbon-coated (Mg1.1B2)Cu0.05 sample prepared here is even above 1 × 105 A cm-2 at 20 K, 2 T. The results herein suggest that the combination of low-temperature Cu-activated sintering and employment of carbon-coated amorphous boron as a precursor could be a promising technique for the industrial production of practical MgB2 bulks or wires with excellent Jc, as the carbon-coated amorphous boron powder can be produced commercially at low cost, while the addition of Cu is very convenient and inexpensive.

Quantum Effects at a Proton Relaxation at Low Temperatures

NASA Astrophysics Data System (ADS)

Kalytka, V. A.; Korovkin, M. V.

2016-11-01

Quantum effects during migratory polarization in multi-well crystals (including multi-well silicates and crystalline hydrates) are investigated in a variable electric field at low temperatures by direct quantum-mechanical calculations. Based on analytical solution of the quantum Liouville kinetic equation in the linear approximation for the polarizing field, the non-stationary density matrix is calculated for an ensemble of non-interacting protons moving in the field of one-dimensional multi-well crystal potential relief of rectangular shape. An expression for the complex dielectric constant convenient for a comparison with experiment and calculation of relaxer parameters is derived using the nonequilibrium polarization density matrix. The density matrix apparatus can be used for analytical investigation of the quantum mechanism of spontaneous polarization of a ferroelectric material (KDP and DKDP).

Fast-food outlets and walkability in school neighbourhoods predict fatness in boys and height in girls: a Taiwanese population study.

PubMed

Chiang, Po-Huang; Wahlqvist, Mark L; Lee, Meei-Shyuan; Huang, Lin-Yuan; Chen, Hui-Hsin; Huang, Susana Tzy-Ying

2011-09-01

There is increasing evidence that the school food environment contributes to childhood obesity and health in various locations. We investigated the influence of fast-food stores and convenience food stores (FS and CS, respectively) on growth and body composition in a range of residential densities for North-east Asian food culture. Anthropometrics and birth weight of schoolchildren were obtained. Geocoded mapping of schools and food outlets was conducted. Multivariable linear regression models, adjusted for father's ethnicity and education, as well as for household income, pocket money, birth weight, physical activity, television watching, food quality and region, were used to predict body composition from school food environments. Elementary schools and school neighbourhoods in 359 townships/districts of Taiwan. A total of 2283 schoolchildren aged 6-13 years from the Elementary School Children's Nutrition and Health Survey in Taiwan conducted in 2001-2002. Remote and socially disadvantaged locations had the highest prevalence of lower weight, BMI, waist circumference and triceps skinfold thickness. Food store densities, FS and CS, were highest in urban Taiwan and lowest in remote Taiwan. In the fully adjusted models, FS densities predicted weight and BMI in boys; there was a similar association for waist circumference, except when adjusted for region. FS densities also predicted height for girls. Except for weight and BMI in boys, CS did not have effects evident with FS for either boys or girls. A high FS density, more than CS density, in Taiwan increased the risk of general (BMI) and abdominal (waist circumference) obesity in boys and stature in girls. These findings have long-term implications for chronic disease in adulthood.

A Density Perturbation Method to Study the Eigenstructure of Two-Phase Flow Equation Systems

NASA Astrophysics Data System (ADS)

Cortes, J.; Debussche, A.; Toumi, I.

1998-12-01

Many interesting and challenging physical mechanisms are concerned with the mathematical notion of eigenstructure. In two-fluid models, complex phasic interactions yield a complex eigenstructure which may raise numerous problems in numerical simulations. In this paper, we develop a perturbation method to examine the eigenvalues and eigenvectors of two-fluid models. This original method, based on the stiffness of the density ratio, provides a convenient tool to study the relevance of pressure momentum interactions and allows us to get precise approximations of the whole flow eigendecomposition for minor requirements. Roe scheme is successfully implemented and some numerical tests are presented.

Variational optimization algorithms for uniform matrix product states

NASA Astrophysics Data System (ADS)

Zauner-Stauber, V.; Vanderstraeten, L.; Fishman, M. T.; Verstraete, F.; Haegeman, J.

2018-01-01

We combine the density matrix renormalization group (DMRG) with matrix product state tangent space concepts to construct a variational algorithm for finding ground states of one-dimensional quantum lattices in the thermodynamic limit. A careful comparison of this variational uniform matrix product state algorithm (VUMPS) with infinite density matrix renormalization group (IDMRG) and with infinite time evolving block decimation (ITEBD) reveals substantial gains in convergence speed and precision. We also demonstrate that VUMPS works very efficiently for Hamiltonians with long-range interactions and also for the simulation of two-dimensional models on infinite cylinders. The new algorithm can be conveniently implemented as an extension of an already existing DMRG implementation.

The charger transfer electronic coupling in diabatic perspective: A multi-state density functional theory study

NASA Astrophysics Data System (ADS)

Guo, Xinwei; Qu, Zexing; Gao, Jiali

2018-01-01

The multi-state density functional theory (MSDFT) provides a convenient way to estimate electronic coupling of charge transfer processes based on a diabatic representation. Its performance has been benchmarked against the HAB11 database with a mean unsigned error (MUE) of 17 meV between MSDFT and ab initio methods. The small difference may be attributed to different representations, diabatic from MSDFT and adiabatic from ab initio calculations. In this discussion, we conclude that MSDFT provides a general and efficient way to estimate the electronic coupling for charge-transfer rate calculations based on the Marcus-Hush model.

Density and type of food retailers surrounding Canadian schools: variations across socioeconomic status.

PubMed

Seliske, Laura M; Pickett, William; Boyce, William F; Janssen, Ian

2009-09-01

Lower socioeconomic status (SES) neighbourhoods may have differential access to food retailers, potentially explaining the varying area-level obesity rates. The food retail environment around 188 schools across Canada was examined, including full-service restaurants, fast food restaurants, sub/sandwich retailers, donut/coffee shops, convenience stores, and grocery stores. School addresses were linked to census data to obtain area-level SES measures. Access to food retailers was generally not associated with the neighbourhood SES in the immediate proximity. Within the broader neighbourhood, lower SES neighbourhoods had access to fewer food retailers of all types. This effect was diminished after taking population density into account.

A Convenient and Efficient Method to Enrich and Maintain Highly Proliferative Human Fetal Liver Stem Cells

PubMed Central

Guo, Xuan; Wang, Shu; Dou, Ya-ling; Guo, Xiang-fei; Chen, Zhao-li; Wang, Xin-wei; Shen, Zhi-qiang; Qiu, Zhi-gang

2015-01-01

Abstract Pluripotent human hepatic stem cells have broad research and clinical applications, which are, however, restricted by both limited resources and technical difficulties with respect to isolation of stem cells from the adult or fetal liver. In this study, we developed a convenient and efficient method involving a two-step in situ collagenase perfusion, gravity sedimentation, and Percoll density gradient centrifugation to enrich and maintain highly proliferative human fetal liver stem cells (hFLSCs). Using this method, the isolated hFLSCs entered into the exponential growth phase within 10 days and maintained sufficient proliferative activity to permit subculture for at least 20 passages without differentiation. Immunocytochemistry, immunofluorescence, and flow cytometry results showed that these cells expressed stem cell markers, such as c-kit, CD44, epithelial cell adhesion molecule (EpCAM), oval cell marker-6 (OV-6), epithelial marker cytokeratin 18 (CK18), biliary ductal marker CK19, and alpha-fetoprotein (AFP). Gene expression analysis showed that these cells had stable mRNA expression of c-Kit, EpCAM, neural cell adhesion molecule (NCAM), CK19, CK18, AFP, and claudin 3 (CLDN-3) throughout each passage while maintaining low levels of ALB, but with complete absence of cytochrome P450 3A4 (C3A4), phosphoenolpyruvate carboxykinase (PEPCK), telomeric repeat binding factor (TRF), and connexin 26 (CX26) expression. When grown in appropriate medium, these isolated liver stem cells could differentiate into hepatocytes, cholangiocytes, osteoblasts, adipocytes, or endothelial cells. Thus, we have demonstrated a more economical and efficient method to isolate hFLSCs than magnetic-activated cell sorting (MACS). This novel approach may provide an excellent tool to isolate highly proliferative hFLSCs for tissue engineering and regenerative therapies. PMID:25556695

A Convenient and Efficient Method to Enrich and Maintain Highly Proliferative Human Fetal Liver Stem Cells.

PubMed

Guo, Xuan; Wang, Shu; Dou, Ya-ling; Guo, Xiang-fei; Chen, Zhao-li; Wang, Xin-wei; Shen, Zhi-qiang; Qiu, Zhi-gang; Jin, Min; Li, Jun-wen

2015-06-01

Pluripotent human hepatic stem cells have broad research and clinical applications, which are, however, restricted by both limited resources and technical difficulties with respect to isolation of stem cells from the adult or fetal liver. In this study, we developed a convenient and efficient method involving a two-step in situ collagenase perfusion, gravity sedimentation, and Percoll density gradient centrifugation to enrich and maintain highly proliferative human fetal liver stem cells (hFLSCs). Using this method, the isolated hFLSCs entered into the exponential growth phase within 10 days and maintained sufficient proliferative activity to permit subculture for at least 20 passages without differentiation. Immunocytochemistry, immunofluorescence, and flow cytometry results showed that these cells expressed stem cell markers, such as c-kit, CD44, epithelial cell adhesion molecule (EpCAM), oval cell marker-6 (OV-6), epithelial marker cytokeratin 18 (CK18), biliary ductal marker CK19, and alpha-fetoprotein (AFP). Gene expression analysis showed that these cells had stable mRNA expression of c-Kit, EpCAM, neural cell adhesion molecule (NCAM), CK19, CK18, AFP, and claudin 3 (CLDN-3) throughout each passage while maintaining low levels of ALB, but with complete absence of cytochrome P450 3A4 (C3A4), phosphoenolpyruvate carboxykinase (PEPCK), telomeric repeat binding factor (TRF), and connexin 26 (CX26) expression. When grown in appropriate medium, these isolated liver stem cells could differentiate into hepatocytes, cholangiocytes, osteoblasts, adipocytes, or endothelial cells. Thus, we have demonstrated a more economical and efficient method to isolate hFLSCs than magnetic-activated cell sorting (MACS). This novel approach may provide an excellent tool to isolate highly proliferative hFLSCs for tissue engineering and regenerative therapies.

Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Kai

Size, number density and volume fraction of nano-precipitates are important microstructural parameters controlling the strengthening of materials. In this work a widely accessible, convenient, moderately time efficient method with acceptable accuracy and precision has been provided for measurement of volume fraction of nano-precipitates in crystalline materials. The method is based on the traditional but highly accurate technique of measuring foil thickness via convergent beam electron diffraction. A new equation is proposed and verified with the aid of 3-dimensional atom probe (3DAP) analysis, to compensate for the additional error resulted from the hardly distinguishable contrast of too short incomplete precipitates cutmore » by the foil surface. The method can be performed on a regular foil specimen with a modern LaB{sub 6} or field-emission-gun transmission electron microscope. Precisions around ± 16% have been obtained for precipitate volume fractions of needle-like β″/C and Q precipitates in an aged Al-Mg-Si-Cu alloy. The measured number density is close to that directly obtained using 3DAP analysis by a misfit of 4.5%, and the estimated precision for number density measurement is about ± 11%. The limitations of the method are also discussed. - Highlights: •A facile method for measuring volume fraction of nano-precipitates based on CBED •An equation to compensate for small invisible precipitates, with 3DAP verification •Precisions around ± 16% for volume fraction and ± 11% for number density.« less

Evaluation of the antibacterial activity of a cationic polymer in aqueous solution with a convenient electrochemical method.

PubMed

Wang, Yihong; Guo, Qing; Wang, Huafu; Qian, Kun; Tian, Liang; Yao, Chen; Song, Wei; Shu, Weixia; Chen, Ping; Qi, Jinxu

2017-02-01

Quaternized chitosan is a cationic biopolymer with good antibacterial activity, biocompatibility, and biodegradability, and it has been widely applied in many fields. We have developed a convenient method to evaluate the antibacterial activity of hydroxypropyltrimethylammonium chloride chitosan (HACC) with a nonionic surfactant poloxamer in aqueous solution by monitoring the change of the oxidation peak current in cyclic voltammetry. Increasing values of the oxidation peak current were positively correlated with the antibacterial activity of HACC-poloxamer solutions. Optical microscope images, the zeta potential, and fluorescence spectroscopy showed that the aggregation state of HACC-poloxamer was related to the ratio of the two polymers and also to the antibacterial activity and oxidation peak current. At an HACC-to-poloxamer ratio of 1:0.75, the maximum surface charge density and the smooth edge of HACC-poloxamer aggregates can accelerate diffusion in aqueous solution. It is expected that this convenient method can be applied for a quick evaluation of the antibacterial activity of cationic biopolymers in aqueous solution. Graphical Abstract The cyclic voltammograms of MB in HACC/poloxamer solution, and the antibacterial efficiency against S. aureus after incubated with HACC (a) and 1/0.75 of HACC/poloxamer (b).

[A measure of the motives underlying snack selection among Japanese junior high school students: the Snack Choice Questionnaire (SCQ)].

PubMed

Akamatsu, Rie

2007-02-01

To develop a measure of the motives underlying snack selection by Japanese junior high school students and to examine the characteristics of each motivating factor. Self-reported questionnaires were distributed in a cross-sectional study of 1,936 students in public junior high schools in Tokyo, Japan. The respondents answered the Snack Choice Questionnaire (SCQ) and the Dutch Eating Behavior Questionnaire (DEBQ), which assess overeating, snacking behavior, the food environment, lifestyle, and demographics. Twenty-two items of the SCQ were factor-analyzed using varimax rotation. Three factors were extracted and labeled "fashion and sales promotion," "convenience and taste," "health and weight control." All factors demonstrated a satisfactory Cronbach's alpha coefficient of over 0.80, and scores for both "fashion and sales promotion" (r= 0.349, P<0.001) and "convenience and taste" (r= 0.418, P<0.001) showed positive correlations with DEBQ scores. On the other hand, scores for "health and weight control" (r= 0.014, ns) were not statistically significant. Furthermore, the students who reported buying or eating snack foods frequently had high scores for "fashion and sales promotion" and "convenience and taste" but not for "health and weight control." The factor "fashion and sales promotion" was related to more TV viewing (beta = 0.060, P< 0.05), while the factor "convenience and taste" was related to the availability of convenience stores near a student's home (beta=0.109, P<0.001). The results of this first study of the motives underlying snack food selection in junior high-schools in Japan suggest a need for comprehensive nutrition education, along with a focus on media literacy and consumer education.

Formation and properties of surface-anchored polymer assemblies with tunable physico-chemical characteristics

NASA Astrophysics Data System (ADS)

Wu, Tao

We describe two new methodologies leading to the formation of novel surface-anchored polymer assemblies on solid substrates. While the main goal is to understand the fundamentals pertaining to the preparation and properties of the surface-bound polymer assemblies (including neutral and chargeable polymers), several examples also are mentioned throughout the Thesis that point out to practical applications of such structures. The first method is based on generating assemblies comprising anchored polymers with a gradual variation of grafting densities on solid substrates. These structures are prepared by first covering the substrate with a molecular gradient of the polymerization initiator, followed by polymerization from these substrate-bound initiator centers ("grafting from"). We apply this technique to prepare grafting density gradients of poly(acryl amide) (PAAm) and poly(acrylic acid) (PAA) on silica-covered substrates. We show that using the grafting density gradient geometry, the characteristics of surface-anchored polymers in both the low grafting density ("mushroom") regime as well as the high grafting density ("brush") regime can be accessed conveniently on a single sample. We use a battery of experimental methods, including Fourier transform infrared spectroscopy (FTIR), Near-edge absorption fine structure spectroscopy (NEXAFS), contact angle, ellipsometry, to study the characteristics of the surface-bound polymer layers. We also probe the scaling laws of neutral polymer as a function of grafting density, and for weak polyelectrolyte, in addition to the grafting density, we study the affect of solution ionic strength and pH values. In the second novel method, which we coined as "mechanically assisted polymer assembly" (MAPA), we form surface anchored polymers by "grafting from" polymerization initiators deposited on elastic surfaces that have been previously extended uniaxially by a certain length increment, Deltax. Upon releasing the strain in the substrate after completion of polymerization, we show the grafting density of the polymers grafted to flexible substrates can be tuned as a function of Deltax.

Magnitude of faecal contamination of rural community well waters in Nigeria and its relationship to well and water properties.

PubMed

Ogan, M T

1989-12-01

The possible relationship between high numbers of fecal coliforms (FCs), fecal streptococci (FS), standard plate count (SPCs) and well characteristics viz: well depth, water column, temperature, pH and non-filterable residue in 25 rural community wells in the Port Harcourt region, Nigeria, was studied. Zonal differences in residue level, well depth and fecal indicator bacteria were observed; these parameters were lowest in an area of high population density (slum) reclaimed from and adjacent to mangrove forests. Although some wells were covered and/or walled to protect them from surface runoff contamination, FCs and FS were recovered from all, except three, in numbers (log10 per 100 mL) ranging respectively from 0.40-3.79 and 0.70-3.44. The FC:FS ratio was less than 1.0 in 8 and greater than 1.0 in 14 samples. Well depth correlated with FCs (p = 0.01; r = 0.5684), FS (p = 0.001; r = 0.6423), pH (p = 0.0001; r = 0.5981); FCs and FS correlated significantly (p = 0.01; r = 0.4948). SPCs did not correlate significantly with FCs, FS and the well and water characteristics. Simultaneous analysis of samples by the Membrane-filtration (MF) and Most Probable Number (MPN) methods recovered mean FC counts in the decreasing sequence: Standard-MPN----Anaerobic----Aerobic MF----Direct-MPN. The underground water table is most probably contaminated via large numbers of soakaway pits and similar conveniences. Downward movement of contaminant from the shallow conveniences into deeper water tables may explain the well depth: indicator bacteria correlation.

Commercial Motion Sensor Based Low-Cost and Convenient Interactive Treadmill.

PubMed

Kim, Jonghyun; Gravunder, Andrew; Park, Hyung-Soon

2015-09-17

Interactive treadmills were developed to improve the simulation of overground walking when compared to conventional treadmills. However, currently available interactive treadmills are expensive and inconvenient, which limits their use. We propose a low-cost and convenient version of the interactive treadmill that does not require expensive equipment and a complicated setup. As a substitute for high-cost sensors, such as motion capture systems, a low-cost motion sensor was used to recognize the subject's intention for speed changing. Moreover, the sensor enables the subject to make a convenient and safe stop using gesture recognition. For further cost reduction, the novel interactive treadmill was based on an inexpensive treadmill platform and a novel high-level speed control scheme was applied to maximize performance for simulating overground walking. Pilot tests with ten healthy subjects were conducted and results demonstrated that the proposed treadmill achieves similar performance to a typical, costly, interactive treadmill that contains a motion capture system and an instrumented treadmill, while providing a convenient and safe method for stopping.

Liquid fuel cells.

PubMed

Soloveichik, Grigorii L

2014-01-01

The advantages of liquid fuel cells (LFCs) over conventional hydrogen-oxygen fuel cells include a higher theoretical energy density and efficiency, a more convenient handling of the streams, and enhanced safety. This review focuses on the use of different types of organic fuels as an anode material for LFCs. An overview of the current state of the art and recent trends in the development of LFC and the challenges of their practical implementation are presented.

Multivariate modelling of density, strength, and stiffness from near infared for mature, juvenile, and pith wood of longleaf pine (Pinus Palustris)

Treesearch

Brian K. Via; Todd F. Shupe; Leslie H. Groom; Michael Stine; Chi-Leung So

2003-01-01

In manufacturing, monitoring the mechanical properties of wood with near infrared spectroscopy (NIR) is an attractive alternative to more conventional methods. However, no attention has been given to see if models differ between juvenile and mature wood. Additionally, it would be convenient if multiple linear regression (MLR) could perform well in the place of more...

Availability, quality and price of produce in low-income neighbourhood food stores in California raise equity issues.

PubMed

Gosliner, Wendi; Brown, Daniel M; Sun, Betty C; Woodward-Lopez, Gail; Crawford, Patricia B

2018-06-01

To assess produce availability, quality and price in a large sample of food stores in low-income neighbourhoods in California. Cross-sectional statewide survey. Between 2011 and 2015, local health departments assessed store type, WIC (Supplemental Nutrition Program for Women, Infants, and Children)/SNAP (Supplemental Nutrition Assistance Program) participation, produce availability, quality and price of selected items in stores in low-income neighbourhoods. Secondary data provided reference chain supermarket produce prices matched by county and month. t Tests and ANOVA examined differences by store type; regression models examined factors associated with price. Large grocery stores (n 231), small markets (n 621) and convenience stores (n 622) in 225 neighbourhoods. Produce in most large groceries was rated high quality (97 % of fruits, 98 % of vegetables), but not in convenience stores (25 % fruits, 14 % vegetables). Small markets and convenience stores participating in WIC and/or SNAP had better produce availability, variety and quality than non-participating stores. Produce prices across store types were, on average, higher than reference prices from matched chain supermarkets (27 % higher in large groceries, 37 % higher in small markets, 102 % higher in convenience stores). Price was significantly inversely associated with produce variety, adjusting for quality, store type, and SNAP and WIC participation. The study finds that fresh produce is more expensive in low-income neighbourhoods and that convenience stores offer more expensive, poorer-quality produce than other stores. Variety is associated with price and most limited in convenience stores, suggesting more work is needed to determine how convenience stores can provide low-income consumers with access to affordable, high-quality produce. WIC and SNAP can contribute to the solution.

The influence of local food environments on adolescents' food purchasing behaviors.

PubMed

He, Meizi; Tucker, Patricia; Gilliland, Jason; Irwin, Jennifer D; Larsen, Kristian; Hess, Paul

2012-04-01

This study examined the relationship between the neighborhood food environment and the food purchasing behaviors among adolescents. Grade 7 and 8 students (n = 810) at 21 elementary schools in London, Ontario, Canada completed a questionnaire assessing their food purchasing behaviors. Parents of participants also completed a brief questionnaire providing residential address and demographic information. A Geographic Information System (GIS) was used to assess students' home and school neighborhood food environment and land use characteristics. Logistic regression analysis was conducted to assess the influence of the home neighborhood food environment on students' food purchasing behaviors, while two-level Hierarchical Non-Linear Regression Models were used to examine the effects of school neighborhood food environment factors on students' food purchasing behaviors. The study showed that approximately 65% of participants reported self-purchasing foods from fast-food outlets or convenience stores. Close proximity (i.e., less than 1 km) to the nearest fast-food outlet or convenience store in the home neighborhood increased the likelihood of food purchasing from these food establishments at least once per week by adolescents (p < 0.05). High fast-food outlet density in both home and school neighborhoods was associated with increased fast-food purchasing by adolescents (i.e., at least once per week; p < 0.05). In conclusion, macro-level regulations and policies are required to amend the health-detracting neighborhood food environment surrounding children and youth's home and school.

The Influence of Local Food Environments on Adolescents’ Food Purchasing Behaviors

PubMed Central

He, Meizi; Tucker, Patricia; Gilliland, Jason; Irwin, Jennifer D.; Larsen, Kristian; Hess, Paul

2012-01-01

This study examined the relationship between the neighborhood food environment and the food purchasing behaviors among adolescents. Grade 7 and 8 students (n = 810) at 21 elementary schools in London, Ontario, Canada completed a questionnaire assessing their food purchasing behaviors. Parents of participants also completed a brief questionnaire providing residential address and demographic information. A Geographic Information System (GIS) was used to assess students’ home and school neighborhood food environment and land use characteristics. Logistic regression analysis was conducted to assess the influence of the home neighborhood food environment on students’ food purchasing behaviors, while two-level Hierarchical Non-Linear Regression Models were used to examine the effects of school neighborhood food environment factors on students’ food purchasing behaviors. The study showed that approximately 65% of participants reported self-purchasing foods from fast-food outlets or convenience stores. Close proximity (i.e., less than 1 km) to the nearest fast-food outlet or convenience store in the home neighborhood increased the likelihood of food purchasing from these food establishments at least once per week by adolescents (p < 0.05). High fast-food outlet density in both home and school neighborhoods was associated with increased fast-food purchasing by adolescents (i.e., at least once per week; p < 0.05). In conclusion, macro-level regulations and policies are required to amend the health-detracting neighborhood food environment surrounding children and youth’s home and school. PMID:22690205

Is the density of alcohol establishments related to nonviolent crime?

PubMed

Toomey, Traci L; Erickson, Darin J; Carlin, Bradley P; Quick, Harrison S; Harwood, Eileen M; Lenk, Kathleen M; Ecklund, Alexandra M

2012-01-01

We examined the associations between the density of alcohol establishments and five types of nonviolent crime across urban neighborhoods. Data from the city of Minneapolis, MN, in 2009 were aggregated and analyzed at the neighborhood level. We examined the association between alcohol establishment density and five categories of nonviolent crime: vandalism, nuisance crime, public alcohol consumption, driving while intoxicated, and underage alcohol possession/consumption. A Bayesian approach was used for model estimation accounting for spatial auto-correlation and controlling for relevant neighborhood demographics. Models were estimated for total alcohol establishment density and then separately for off-premise establishments (e.g., liquor and convenience stores) and on-premise establishments (e.g., bars and restaurants). We found positive associations between density and each crime category. The association was strongest for public consumption and weakest for vandalism. We estimated that a 3.3%-10.9% increase across crime categories would result from a 20% increase in neighborhood establishment density. Similar results were seen for on- and off-premise establishments, although the strength of the associations was lower for off-premise density. Our results indicate that communities should consider the potential increase in nonviolent crime associated with an increase in the number of alcohol establishments within neighborhoods.

Availability of convenience stores and adolescent alcohol use in Taiwan: a multi-level analysis of national surveys.

PubMed

Wang, Shi-Heng; Lin, I-Chin; Chen, Chuan-Yu; Chen, Duan-Rung; Chan, Ta-Chien; Chen, Wei J

2013-12-01

To examine the association between alcohol in school environments and adolescent alcohol use over the previous 6 months. A multi-level logistic regression analysis was performed of cross-sectional surveys conducted in 2004, 2005 and 2006. A total of 52 214 students aged 11-19 years from 387 middle or high schools were selected from a nationally representative, multi-stage, stratified probability sampling across Taiwan. Information on socio-demographic features and substance use experiences was collected using self-administered questionnaires. The alcohol in the environment was measured using the availability of convenience stores surrounding the schools. Using geographical information systems, the weighted numbers of convenience stores within 1 km, a 12-15-minute walk, of a school were calculated. The schools were later categorized into three subgroups via the tertile of nearby convenience stores. Considering the compositional characteristics, the availability of convenience stores was found to account for 1.5% of the school-level variance of youthful drinking. The odds ratios (95% confidence interval) of alcohol use over the previous 6 months among youth attending schools with medium and high availability were 1.04 (0.96-1.13) and 1.08 (1.00-1.17), respectively, with a P-value of 0.04 in the trend test. The greater availability of convenience stores near a school is associated with an increased risk of alcohol use among adolescents over the previous 6 months. © 2013 Society for the Study of Addiction.

Zoledronic acid: a review of its use in the treatment of osteoporosis.

PubMed

Deeks, Emma D; Perry, Caroline M

2008-01-01

Zoledronic acid (Aclasta; Reclast), a third-generation nitrogen-containing bisphosphonate, is the first once-yearly treatment to have been approved for use in patients with postmenopausal osteoporosis or at high risk of fracture. Intravenous zoledronic acid 5 mg once yearly is effective in reducing the risk of several types of fracture in patients with postmenopausal osteoporosis or recent low-trauma hip fracture. Moreover, improvements in bone mineral density (BMD) and reductions in markers of bone turnover are also generally observed. Zoledronic acid is generally well tolerated. Additional comparative data are required to definitively position zoledronic acid with respect to other agents. In the meantime, intravenous zoledronic acid 5 mg once yearly is a convenient and effective treatment option that may have an advantage over some other agents, for which adherence to treatment regimens is a recognized problem.

ELSA: An integrated, semi-automated nebular abundance package

NASA Astrophysics Data System (ADS)

Johnson, Matthew D.; Levitt, Jesse S.; Henry, Richard B. C.; Kwitter, Karen B.

We present ELSA, a new modular software package, written in C, to analyze and manage spectroscopic data from emission-line objects. In addition to calculating plasma diagnostics and abundances from nebular emission lines, the software provides a number of convenient features including the ability to ingest logs produced by IRAF's splot task, to semi-automatically merge spectra in different wavelength ranges, and to automatically generate various data tables in machine-readable or LaTeX format. ELSA features a highly sophisticated interstellar reddening correction scheme that takes into account temperature and density effects as well as He II contamination of the hydrogen Balmer lines. Abundance calculations are performed using a 5-level atom approximation with recent atomic data, based on R. Henry's ABUN program. Downloading and detailed documentation for all aspects of ELSA are available at the following URL:

Detection of small-size solder ball defects through heat conduction analysis

NASA Astrophysics Data System (ADS)

Zhou, Xiuyun; Chen, Yaqiu; Lu, Xiaochuan

2018-02-01

Aiming to solve the defect detection problem of a small-size solder ball in the high density chip, heat conduction analysis based on eddy current pulsed thermography is put forward to differentiate various defects. With establishing the 3D finite element model about induction heating, defects such as cracks and void can be distinguished by temperature difference resulting from heat conduction. Furthermore, the experiment of 0.4 mm-diameter solder balls with different defects is carried out to prove that crack and void solder can be distinguished. Three kinds of crack length on a gull-wing pin are selected, including 0.24 mm, 1.2 mm, and 2.16 mm, to verify that the small defect can be discriminated. Both the simulation study and experiment result show that the heat conduction analysis method is reliable and convenient.

Rationale for continuing R&D in direct coal conversion to produce high quality transportation fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, R.D.; McIlvried, H.G.; Gray, D.

1995-12-31

For the foreseeable future, liquid hydrocarbon fuels will play a significant role in the transportation sector of both the United States and the world. Factors favoring these fuels include convenience, high energy density, and the vast existing infrastructure for their production and use. At present the U.S. consumes about 26% of the world supply of petroleum, but this situation is expected to change because of declining domestic production and increasing competition for imports from countries with developing economies. A scenario and time frame are developed in which declining world resources will generate a shortfall in petroleum supply that can bemore » allieviated in part by utilizing the abundant domestic coal resource base. One option is direct coal conversion to liquid transportation fuels. Continued R&D in coal conversion technology will results in improved technical readiness that can significantly reduce costs so that synfuels can compete economically in a time frame to address the shortfall.« less

Photochemical Dimerization of Dibenzylideneacetone: A Convenient Exercise in [2+2] Cycloaddition Using Chemical Ionization Mass Spectrometry

ERIC Educational Resources Information Center

Rao, G. Nageswara; Janardhana, Chelli; Ramanathan, V.; Rajesh, T.; Kumar, P. Harish

2006-01-01

Chemical reactions induced by light have been utilized for synthesizing highly strained, thermodynamically unstable compounds, which are inaccessible through non-photochemical methods. Photochemical cycloaddition reactions, especially those leading to the formation of four-membered rings, constitute a convenient route to compounds that are…

Convenient divergent strategy for the synthesis of TunePhos-type chiral diphosphine ligands and their applications in highly enantioselective Ru-catalyzed hydrogenations.

PubMed

Sun, Xianfeng; Zhou, Le; Li, Wei; Zhang, Xumu

2008-02-01

A convenient, divergent strategy for the synthesis of a series of modular and fine-tunable C3-TunePhos-type chiral diphosphine ligands and their applications in highly efficient Ru-catalyzed asymmetric hydrogenations were explored. Up to 97 and 99% ee values were achieved for the enantioselective synthesis of beta-methyl chiral amines and alpha-hydroxy acid derivatives, respectively.

Liquid fuel cells

PubMed Central

2014-01-01

Summary The advantages of liquid fuel cells (LFCs) over conventional hydrogen–oxygen fuel cells include a higher theoretical energy density and efficiency, a more convenient handling of the streams, and enhanced safety. This review focuses on the use of different types of organic fuels as an anode material for LFCs. An overview of the current state of the art and recent trends in the development of LFC and the challenges of their practical implementation are presented. PMID:25247123

Development of atomic radical monitoring probe and its application to spatial distribution measurements of H and O atomic radical densities in radical-based plasma processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takahashi, Shunji; Katagiri Engineering Co., Ltd., 3-5-34 Shitte Tsurumi-ku, Yokohama 230-0003; Takashima, Seigo

2009-09-01

Atomic radicals such as hydrogen (H) and oxygen (O) play important roles in process plasmas. In a previous study, we developed a system for measuring the absolute density of H, O, nitrogen, and carbon atoms in plasmas using vacuum ultraviolet absorption spectroscopy (VUVAS) with a compact light source using an atmospheric pressure microplasma [microdischarge hollow cathode lamp (MHCL)]. In this study, we developed a monitoring probe for atomic radicals employing the VUVAS with the MHCL. The probe size was 2.7 mm in diameter. Using this probe, only a single port needs to be accessed for radical density measurements. We successfullymore » measured the spatial distribution of the absolute densities of H and O atomic radicals in a radical-based plasma processing system by moving the probe along the radial direction of the chamber. This probe allows convenient analysis of atomic radical densities to be carried out for any type of process plasma at any time. We refer to this probe as a ubiquitous monitoring probe for atomic radicals.« less

Generalization of the Kohn-Sham system that can represent arbitrary one-electron density matrices

DOE PAGES

Hubertus J. J. van Dam

2016-04-27

Density functional theory is currently the most widely applied method in electronic structure theory. The Kohn-Sham method, based on a fictitious system of noninteracting particles, is the workhorse of the theory. The particular form of the Kohn-Sham wave function admits only idempotent one-electron density matrices whereas wave functions of correlated electrons in post-Hartree-Fock methods invariably have fractional occupation numbers. Here we show that by generalizing the orbital concept and introducing a suitable dot product as well as a probability density, a noninteracting system can be chosen that can represent the one-electron density matrix of any system, even one with fractionalmore » occupation numbers. This fictitious system ensures that the exact electron density is accessible within density functional theory. It can also serve as the basis for reduced density matrix functional theory. Moreover, to aid the analysis of the results the orbitals may be assigned energies from a mean-field Hamiltonian. This produces energy levels that are akin to Hartree-Fock orbital energies such that conventional analyses based on Koopmans' theorem are available. Lastly, this system is convenient in formalisms that depend on creation and annihilation operators as they are trivially applied to single-determinant wave functions.« less

Printable, scannable biometric templates for secure documents and materials

NASA Astrophysics Data System (ADS)

Cambier, James L.; Musgrave, Clyde

2000-04-01

Biometric technology has been widely acknowledged as an effective means for enhancing private and public security through applications in physical access control, computer and computer network access control, medical records protection, banking security, public identification programs, and others. Nearly all of these applications involve use of a biometric token to control access to a physical entity or private information. There are also unique benefits to be derived from attaching a biometric template to a physical entity such as a document, package, laboratory sample, etc. Such an association allows fast, reliable, and highly accurate association of an individual person's identity to the physical entity, and can be used to enhance security, convenience, and privacy in many types of transactions. Examples include authentication of documents, tracking of laboratory samples in a testing environment, monitoring the movement of physical evidence within the criminal justice system, and authenticating the identity of both sending and receiving parties in shipment of high value parcels. A system is described which combines a biometric technology based on iris recognition with a printing and scanning technology for high-density bar codes.

Radiochromic film sensitivity calibrations using ion beams from a Pelletron accelerator

NASA Astrophysics Data System (ADS)

Filkins, T. M.; Steidle, Jessica; Ward, R. J.; Freeman, C. G.; Padalino, S. J.; Regan, S. P.; Sangster, T. C.

2015-11-01

Radiochromic film (RCF) is a transparent detector film that permanently changes color following exposure to ionizing radiation. The optical density of the film increases with increasing absorbed dose. RCF is convenient to use because it requires no chemical processing and can be scanned using commercially available document scanners. RCF is used frequently in medical applications, but is also used in a variety of diagnostics in high energy density physics. The film consists of a single or double layer of radiation-sensitive organic microcrystal monomers placed onto a polyester backing. GafchromicTM manufactures a large number of different types of RCF, and new types of film frequently replace older products. In this study, the sensitivity of several types of RCF to ion beams of different energies was measured. Ion beams produced by the SUNY Geneseo 1.7 MV Pelletron accelerator were directed into a target chamber where they scattered off of a gold foil. A sample of RCF was exposed to the scattered ions. The fluence of incident particles on the film was measured using a surface barrier detector. Results of these calibrations will be presented. This work was funded in part by a grant from the DOE through the Laboratory for Laser Energetics.

Thick-tissue bioreactor as a platform for long-term organotypic culture and drug delivery.

PubMed

Markov, Dmitry A; Lu, Jenny Q; Samson, Philip C; Wikswo, John P; McCawley, Lisa J

2012-11-07

We have developed a novel, portable, gravity-fed, microfluidics-based platform suitable for optical interrogation of long-term organotypic cell culture. This system is designed to provide convenient control of cell maintenance, nutrients, and experimental reagent delivery to tissue-like cell densities housed in a transparent, low-volume microenvironment. To demonstrate the ability of our Thick-Tissue Bioreactor (TTB) to provide stable, long-term maintenance of high-density cellular arrays, we observed the morphogenic growth of human mammary epithelial cell lines, MCF-10A and their invasive variants, cultured under three-dimensional (3D) conditions inside our system. Over the course of 21 days, these cells typically develop into hollow "mammospheres" if cultured in standard 3D Matrigel. This complex morphogenic process requires alterations in a variety of cellular functions, including degradation of extracellular matrix that is regulated by cell-produced matrix proteinases. For our "drug" delivery testing and validation experiments we have introduced proteinase inhibitors into the fluid supply system, and we observed both reduced proteinase activity and inhibited cellular morphogenesis. The size inhibition results correlated well with the overall proteinase activities of the tested cells.

SkinChip, a new tool for investigating the skin surface in vivo.

PubMed

Lévêque, Jean Luc; Querleux, Bernard

2003-11-01

Non-invasive methods used for characterizing skin micro-relief and skin surface hydration were developed in the 1980s. Although they allowed some progress in the knowledge of skin properties, they are not completely satisfactory in many aspects. Today, new technologies are emerging that may address such issues. We adapted the technology produced by the ST Microelectronics Company for sensing fingerprint for the measurement of skin surface properties. Accordingly, we developed acquisition software for obtaining routinely the distribution of skin surface capacitance along different body sites. Image analysis softwares were also processed for collecting both the main orientations of the micro-relief lines and their density. The average value of skin capacitance is also obtained. The images allow a highly precise observation of the skin topography that can be easily quantified in terms of line density and line orientation. The mean gray levels of the images appear much closely correlated to the Corneometer values. This new device appears to be a very convenient way for characterizing the properties of the skin surface. With regard to hydration, it usefully provides both the average value and the hydration chart of the investigated skin zones.

Molecular Orbital Principles of Oxygen-Redox Battery Electrodes.

PubMed

Okubo, Masashi; Yamada, Atsuo

2017-10-25

Lithium-ion batteries are key energy-storage devices for a sustainable society. The most widely used positive electrode materials are LiMO 2 (M: transition metal), in which a redox reaction of M occurs in association with Li + (de)intercalation. Recent developments of Li-excess transition-metal oxides, which deliver a large capacity of more than 200 mAh/g using an extra redox reaction of oxygen, introduce new possibilities for designing higher energy density lithium-ion batteries. For better engineering using this fascinating new chemistry, it is necessary to achieve a full understanding of the reaction mechanism by gaining knowledge on the chemical state of oxygen. In this review, a summary of the recent advances in oxygen-redox battery electrodes is provided, followed by a systematic demonstration of the overall electronic structures based on molecular orbitals with a focus on the local coordination environment around oxygen. We show that a π-type molecular orbital plays an important role in stabilizing the oxidized oxygen that emerges upon the charging process. Molecular orbital principles are convenient for an atomic-level understanding of how reversible oxygen-redox reactions occur in bulk, providing a solid foundation toward improved oxygen-redox positive electrode materials for high energy-density batteries.

Emg Amplitude Estimators Based on Probability Distribution for Muscle-Computer Interface

NASA Astrophysics Data System (ADS)

Phinyomark, Angkoon; Quaine, Franck; Laurillau, Yann; Thongpanja, Sirinee; Limsakul, Chusak; Phukpattaranont, Pornchai

To develop an advanced muscle-computer interface (MCI) based on surface electromyography (EMG) signal, the amplitude estimations of muscle activities, i.e., root mean square (RMS) and mean absolute value (MAV) are widely used as a convenient and accurate input for a recognition system. Their classification performance is comparable to advanced and high computational time-scale methods, i.e., the wavelet transform. However, the signal-to-noise-ratio (SNR) performance of RMS and MAV depends on a probability density function (PDF) of EMG signals, i.e., Gaussian or Laplacian. The PDF of upper-limb motions associated with EMG signals is still not clear, especially for dynamic muscle contraction. In this paper, the EMG PDF is investigated based on surface EMG recorded during finger, hand, wrist and forearm motions. The results show that on average the experimental EMG PDF is closer to a Laplacian density, particularly for male subject and flexor muscle. For the amplitude estimation, MAV has a higher SNR, defined as the mean feature divided by its fluctuation, than RMS. Due to a same discrimination of RMS and MAV in feature space, MAV is recommended to be used as a suitable EMG amplitude estimator for EMG-based MCIs.

Usefulness of non-fasting lipid parameters in children.

PubMed

Kubo, Toshihide; Takahashi, Kyohei; Furujo, Mahoko; Hyodo, Yuki; Tsuchiya, Hiroki; Hattori, Mariko; Fujinaga, Shoko; Urayama, Kenji

2017-01-01

This study assessed whether non-fasting lipid markers could be substituted for fasting markers in screening for dyslipidemia, whether direct measurement of non-fasting low-density lipoprotein cholesterol [LDL-C (D)] could be substituted for the calculation of fasting LDL-C [LDL-C (F)], and the utility of measuring non-high-density lipoprotein cholesterol (non-HDL-C). In 33 children, the lipid profile was measured in the non-fasting and fasting states within 24 h. Correlations were examined between non-fasting LDL-C (D) or non-HDL-C levels and fasting LDL-C (F) levels. Non-fasting triglyceride (TG), total cholesterol (TC), HDL-C, LDL-C (D), and non-HDL-C levels were all significantly higher than the fasting levels, but the mean difference was within 10% (except for TG). Non-fasting LDL-C (D) and non-HDL-C levels were strongly correlated with the fasting LDL-C (F) levels. In conclusion, except for TG, non-fasting lipid parameters are useful when screening children for dyslipidemia. Direct measurement of non-fasting LDL-C and calculation of non-fasting non-HDL-C could replace the calculation of fasting LDL-C because of convenience.

High-capacity lithium-ion battery conversion cathodes based on iron fluoride nanowires and insights into the conversion mechanism.

PubMed

Li, Linsen; Meng, Fei; Jin, Song

2012-11-14

The increasing demands from large-scale energy applications call for the development of lithium-ion battery (LIB) electrode materials with high energy density. Earth abundant conversion cathode material iron trifluoride (FeF(3)) has a high theoretical capacity (712 mAh g(-1)) and the potential to double the energy density of the current cathode material based on lithium cobalt oxide. Such promise has not been fulfilled due to the nonoptimal material properties and poor kinetics of the electrochemical conversion reactions. Here, we report for the first time a high-capacity LIB cathode that is based on networks of FeF(3) nanowires (NWs) made via an inexpensive and scalable synthesis. The FeF(3) NW cathode yielded a discharge capacity as high as 543 mAh g(-1) at the first cycle and retained a capacity of 223 mAh g(-1) after 50 cycles at room temperature under the current of 50 mA g(-1). Moreover, high-resolution transmission electron microscopy revealed the existence of continuous networks of Fe in the lithiated FeF(3) NWs after discharging, which is likely an important factor for the observed improved electrochemical performance. The loss of active material (FeF(3)) caused by the increasingly ineffective reconversion process during charging was found to be a major factor responsible for the capacity loss upon cycling. With the advantages of low cost, large quantity, and ease of processing, these FeF(3) NWs are not only promising battery cathode materials but also provide a convenient platform for fundamental studies and further improving conversion cathodes in general.

Flexible Asymmetric Supercapacitors Based on Nitrogen-Doped Graphene Hydrogels with Embedded Nickel Hydroxide Nanoplates.

PubMed

Xie, Hao; Tang, Shaochun; Li, Dongdong; Vongehr, Sascha; Meng, Xiangkang

2017-05-22

To push the energy density limit of supercapacitors (SCs), new electrode materials with hierarchical nano-micron pore architectures are strongly desired. Graphene hydrogels that consist of 3 D porous frameworks have received particular attention but their capacitance is limited by electrical double layer capacitance. In this work, we report the rational design and fabrication of a composite hydrogel of N-doped graphene (NG) that contains embedded Ni(OH) 2 nanoplates that is cut conveniently into films to serve as positive electrodes for flexible asymmetric solid-state SCs with NG hydrogel films as negative electrodes. The use of high-power ultrasound leads to hierarchically porous micron-scale sheets that consist of a highly interconnected 3 D NG network in which Ni(OH) 2 nanoplates are well dispersed, which avoids the stacking of NG, Ni(OH) 2 , and their composites. The optimal SC device benefits from the compositional features and 3 D electrode architecture and has a high specific areal capacitance of 255 mF cm -2 at 1.0 mA cm -2 and a very stable, high output cell voltage of 1.45 V, which leads to an energy density of 80 μW h cm -2 even at a high power of 944 μW cm -2 , considerably higher than that reported for similar devices. The devices exhibit a high rate capability and only 8 % capacitance loss over 10 000 charging cycles as well as excellent flexibility with no clear performance degradation under strong bending. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Convenience experimentation.

PubMed

Krohs, Ulrich

2012-03-01

Systems biology aims at explaining life processes by means of detailed models of molecular networks, mainly on the whole-cell scale. The whole cell perspective distinguishes the new field of systems biology from earlier approaches within molecular cell biology. The shift was made possible by the high throughput methods that were developed for gathering 'omic' (genomic, proteomic, etc.) data. These new techniques are made commercially available as semi-automatic analytic equipment, ready-made analytic kits and probe arrays. There is a whole industry of supplies for what may be called convenience experimentation. My paper inquires some epistemic consequences of strong reliance on convenience experimentation in systems biology. In times when experimentation was automated to a lesser degree, modeling and in part even experimentation could be understood fairly well as either being driven by hypotheses, and thus proceed by the testing of hypothesis, or as being performed in an exploratory mode, intended to sharpen concepts or initially vague phenomena. In systems biology, the situation is dramatically different. Data collection became so easy (though not cheap) that experimentation is, to a high degree, driven by convenience equipment, and model building is driven by the vast amount of data that is produced by convenience experimentation. This results in a shift in the mode of science. The paper shows that convenience driven science is not primarily hypothesis-testing, nor is it in an exploratory mode. It rather proceeds in a gathering mode. This shift demands another shift in the mode of evaluation, which now becomes an exploratory endeavor, in response to the superabundance of gathered data. Copyright © 2011 Elsevier Ltd. All rights reserved.

An improved apparatus for pressure-injecting fluid into trees

Treesearch

Garold F. Gregory; Thomas W. Jones

1975-01-01

Our original tree-injection apparatus was modified to be more convenient and efficient. The fluid reservoir consists of high-pressure plastic plumbing components. Quick couplers are used for all hose connections. Most important, the injector heads were modified for a faster and more convenient and secure attachment with double-headed nails.

High-density volatiles in the system C-O-H-N for the calibration of a laser Raman microprobe

USGS Publications Warehouse

Chou, I.-Ming; Pasteris, J.D.; Seitz, J.C.

1990-01-01

Three methods have been used to produce high-density volatiles in the system C-O-H-N for the calibration of a laser Raman microprobe (LRM): synthetic fluid-inclusion, sealed fused-quartz-tube, and high-pressure-cell methods. Because quantitative interpretation of a Raman spectrum of mixed-volatile fluid inclusions requires accurate knowledge of pressure- and composition-sensitive Raman scattering efficiencies or quantification factors for each species, calibrations of these parameters for mixtures of volatiles of known composition and pressure are necessary. Two advantages of the synthetic fluid-inclusion method are that the inclusions can be used readily in complementary microthermometry (MT) studies and that they have sizes and optical properties like those in natural samples. Some disadvantages are that producing H2O-free volatile mixtures is difficult, the composition may vary from one inclusion to another, the exact composition and density of the inclusions are difficult to obtain, and the experimental procedures are complicated. The primary advantage of the method using sealed fused-quartz tubes is its simplicity. Some disadvantages are that exact compositions for complex volatile mixtures are difficult to predict, densities can be approximated only, and complementary MT studies on the tubes are difficult to conduct. The advantages of the high-pressure-cell method are that specific, known compositions of volatile mixtures can be produced and that their pressures can be varied easily and are monitored during calibration. Some disadvantages are that complementary MT analysis is impossible, and the setup is bulky. Among the three methods for the calibration of an LRM, the high-pressure-cell method is the most reliable and convenient for control of composition and total pressure. We have used the high-pressure cell to obtain preliminary data on 1. (1) the ratio of the Raman quantification factors for CH4 and N2 in an equimolar CH4N2 mixture and 2. (2) the spectral peak position of ??1 of CH4 in that mixture, as well as in pure CH4, at pressures up to 690 bars. These data were successfully applied to natural inclusions from the Duluth Complex in order to derive their compositions and total pressures. ?? 1990.

Personal factors associated with smoking among marginalized and disadvantaged youth in Japan. A strong relationship between smoking and convenience store use.

PubMed

Watanabe, Isao; Shigeta, Masako; Inoue, Kaoru; Matsui, Daisuke; Ozaki, Etsuko; Kuriyama, Nagato; Ozasa, Kotaro; Yamamoto, Toshiro; Kanamura, Narisato; Watanabe, Yoshiyuki

2013-12-01

A national survey in Japan reported that the prevalence of smoking among high school students has sharply decreased in recent years. However, the survey only considered students who attended regular high schools (RHSs), and Japan offers part-time high schools (PHSs) that are often attended by academically and socioeconomically disadvantaged youth. Therefore, we examined the smoking prevalence and smoking-related factors among PHS students. A self-administered questionnaire-based survey was conducted at six PHSs. The subjects included 540 enrolled students aged 15 to 18 years. The questionnaire included items on smoking status, smokers in the family, frequency of convenience store use, lifestyle behaviors, and health awareness. Logistic regression analysis was used to identify factors that were significantly associated with smoking. A total of 45.6 % of students had smoking experience, and 29.3 % were smokers. For males and females, the smoking prevalence was about 3 and 7-12 times higher, respectively, than that reported in the national survey. The factors found to be significantly associated with smoking included having a smoker in the family, experience with drinking alcohol, and using convenience store daily (odds ratio [OR] = 12.5) or sometimes (OR = 3.63). There was a significant dose-response relationship between smoking and convenience store use. The smoking prevalence among PHS students was remarkably higher than that among RHS students. These findings suggest that marginalized and disadvantaged youth should be targeted for tobacco control, and intervention is needed to protect youth from tobacco sales and advertising at convenience stores.

Geographic and socioeconomic distribution of food vendors: a case study of a municipality in the Southern Brazil.

PubMed

Correa, Elizabeth Nappi; Padez, Cristina Maria Proença; Abreu, Ângelo Horta de; Vasconcelos, Francisco de Assis Guedes de

2017-03-30

The objective of this study was to identify the food vendor distribution profile of the city of Florianópolis, Santa Catarina State, Brazil, and investigate its association with the socioeconomic and demographic characteristics of different municipal regions. This descriptive, cross-sectional study obtained the location of food vendors from secondary data from different institutional sources. The density of different types of food vendors per 1,000 inhabitants in each municipal weighted area was calculated. The Kruskal-Wallis test compared the mean density of food vendors and the weighted income areas. The lowest-income regions had the lowest density of butchers, snack bars, supermarkets, bakeries/pastry shops, natural product stores, juice bars, and convenience stores. The identification of these areas may encourage the creation of public policies that facilitate healthy food startups and/or maintenance of healthy food vendors, especially in the lowest-income regions.

Microwave modification of surface hydroxyl density for g-C3N4 with enhanced photocatalytic activity

NASA Astrophysics Data System (ADS)

An, Na; Zhao, Yang; Mao, Zhiyong; Agrawal, Dinesh Kumar; Wang, Dajian

2018-03-01

Microwave modification was performed on graphitic carbon nitride (g-C3N4) photocatalysts to tail the surface hydroxyl content for enhanced photocatalytic activity in this work. The influence of microwave heating on the surface hydroxyl density was investigated by a suite of characterization methods. The microwave treated g-C3N4 (MT-g-C3N4) delivered a higher photocatalytic activity in degradation of Rhodamine B (RhB) under visible light irradiation than pristine g-C3N4 due to its improved separation efficiency of photogenerated charge carries and promoted absorption capacity of RhB reactants on surface, which resulted from the increased surface hydroxyl density induced by microwave treatment. This study provides a simple and convenient method to modify g-C3N4 materials with enhanced photocatalytic activity for the potential application in photocatalytic elimination of environmental pollutants.

A matched case-control study of convenience store robbery risk factors.

PubMed

Hendricks, S A; Landsittel, D P; Amandus, H E; Malcan, J; Bell, J

1999-11-01

Convenience store clerks have been shown to be at high risk for assault and homicide, mostly owing to robbery or robbery attempts. Although the literature consistently indicates that at least some environmental designs are effective deterrents of robbery, the significance of individual interventions and policies has differed across past studies. To address these issues, a matched case-control study of 400 convenience store robberies in three metropolitan areas of Virginia was conducted. Conditional logistic regression was implemented to evaluate the significance of various environmental designs and other factors possibly related to convenience store robbery. Findings indicate that numerous characteristics of the surrounding environment and population were significantly associated with convenience store robbery. Results also showed that, on a univariate level, most crime prevention factors were significantly associated with a lower risk for robbery. Using a forward selection process, a multivariate model, which included cash handling policy, bullet-resistant shielding, and numerous characteristics of the surrounding area and population, was identified. This study addressed numerous limitations of the previous literature by prospectively collecting extensive data on a large sample of diverse convenience stores and directly addressing the current theory on the robbers' selection of a target store through a matched case-control design.

Is the degree of food processing and convenience linked with the nutritional quality of foods purchased by US households?1234

PubMed Central

Mendez, Michelle A

2015-01-01

Background: “Processed foods” are defined as any foods other than raw agricultural commodities and can be categorized by the extent of changes occurring in foods as a result of processing. Conclusions about the association between the degree of food processing and nutritional quality are discrepant. Objective: We aimed to determine 2000–2012 trends in the contribution of processed and convenience food categories to purchases by US households and to compare saturated fat, sugar, and sodium content of purchases across levels of processing and convenience. Design: We analyzed purchases of consumer packaged goods for 157,142 households from the 2000–2012 Homescan Panel. We explicitly defined categories for classifying products by degree of industrial processing and separately by convenience of preparation. We classified >1.2 million products through use of barcode-specific descriptions and ingredient lists. Median saturated fat, sugar, and sodium content and the likelihood that purchases exceeded maximum daily intake recommendations for these components were compared across levels of processing or convenience by using quantile and logistic regression. Results: More than three-fourths of energy in purchases by US households came from moderately (15.9%) and highly processed (61.0%) foods and beverages in 2012 (939 kcal/d per capita). Trends between 2000 and 2012 were stable. When classifying foods by convenience, ready-to-eat (68.1%) and ready-to-heat (15.2%) products supplied the majority of energy in purchases. The adjusted proportion of household-level food purchases exceeding 10% kcal from saturated fat, 15% kcal from sugar, and 2400 mg sodium/2000 kcal simultaneously was significantly higher for highly processed (60.4%) and ready-to-eat (27.1%) food purchases than for purchases of less-processed foods (5.6%) or foods requiring cooking/preparation (4.9%). Conclusions: Highly processed food purchases are a dominant, unshifting part of US purchasing patterns, but highly processed foods may have higher saturated fat, sugar, and sodium content than less-processed foods. Wide variation in nutrient content suggests food choices within categories may be important. PMID:25948666

Is the degree of food processing and convenience linked with the nutritional quality of foods purchased by US households?

PubMed

Poti, Jennifer M; Mendez, Michelle A; Ng, Shu Wen; Popkin, Barry M

2015-06-01

"Processed foods" are defined as any foods other than raw agricultural commodities and can be categorized by the extent of changes occurring in foods as a result of processing. Conclusions about the association between the degree of food processing and nutritional quality are discrepant. We aimed to determine 2000-2012 trends in the contribution of processed and convenience food categories to purchases by US households and to compare saturated fat, sugar, and sodium content of purchases across levels of processing and convenience. We analyzed purchases of consumer packaged goods for 157,142 households from the 2000-2012 Homescan Panel. We explicitly defined categories for classifying products by degree of industrial processing and separately by convenience of preparation. We classified >1.2 million products through use of barcode-specific descriptions and ingredient lists. Median saturated fat, sugar, and sodium content and the likelihood that purchases exceeded maximum daily intake recommendations for these components were compared across levels of processing or convenience by using quantile and logistic regression. More than three-fourths of energy in purchases by US households came from moderately (15.9%) and highly processed (61.0%) foods and beverages in 2012 (939 kcal/d per capita). Trends between 2000 and 2012 were stable. When classifying foods by convenience, ready-to-eat (68.1%) and ready-to-heat (15.2%) products supplied the majority of energy in purchases. The adjusted proportion of household-level food purchases exceeding 10% kcal from saturated fat, 15% kcal from sugar, and 2400 mg sodium/2000 kcal simultaneously was significantly higher for highly processed (60.4%) and ready-to-eat (27.1%) food purchases than for purchases of less-processed foods (5.6%) or foods requiring cooking/preparation (4.9%). Highly processed food purchases are a dominant, unshifting part of US purchasing patterns, but highly processed foods may have higher saturated fat, sugar, and sodium content than less-processed foods. Wide variation in nutrient content suggests food choices within categories may be important. © 2015 American Society for Nutrition.

Walkable home neighbourhood food environment and children's overweight and obesity: Proximity, density or price?

PubMed

Le, Ha; Engler-Stringer, Rachel; Muhajarine, Nazeem

2016-06-09

To identify characteristics of the food environment associated with child overweight/obesity that could, if subjected to intervention, mitigate the risk of childhood overweight/obesity. We examined whether the proximity to or density of grocery and convenience stores or fast food restaurants, or the prices of healthy food options were more strongly associated with overweight/obesity risk in children. We collected geocoded data by residential addresses for 1,469 children aged 10-14 years and conducted a census of all food outlets in Saskatoon. The Nutrition Environment Measures Survey (NEMS)-Stores and the NEMS-Restaurants were used to measure availability, quality and relative price of healthy food items in stores and restaurants. Children's weight status was calculated on the basis of measured height and weight. Logistic regression was used to test the associations between overweight/obesity and food environment variables. Within an 800 m walking distance from home, 76% of children did not have access to a grocery store; 58% and 32% had access to at least one convenience store or one fast-food restaurant respectively. A significantly lower odds of overweight/obesity was associated with lower price of healthy food items/options in grocery stores (odds ratio [OR] = 0.87, 95% confidence interval [CI] 0.77-0.99) and fast-food restaurants (OR = 0.97, 95% CI 0.95-0.99) within walking distance of home. Neither the distance to the closest food outlet nor the density of food outlets around children's homes was associated with odds of overweight/obesity. Improving economic access to healthy food in food outlets or fast-food restaurants is one strategy to counter childhood overweight/ obesity.

Effect of Reacting Surface Density on the Overall Graphite Oxidation Rate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang H. Oh; Eung Kim; Jong Lim

2009-05-01

Graphite oxidation in an air-ingress accident is presently a very important issue for the reactor safety of the very high temperature gas cooled-reactor (VHTR), the concept of the next generation nuclear plant (NGNP) because of its potential problems such as mechanical degradation of the supporting graphite in the lower plenum of the VHTR might lead to core collapse if the countermeasure is taken carefully. The oxidation process of graphite has known to be affected by various factors, including temperature, pressure, oxygen concentration, types of graphite, graphite shape and size, flow distribution, etc. However, our recent study reveals that the internalmore » pore characteristics play very important roles in the overall graphite oxidation rate. One of the main issues regarding graphite oxidation is the potential core collapse problem that may occur following the degradation of graphite mechanical strength. In analyzing this phenomenon, it is very important to understand the relationship between the degree of oxidization and strength degradation. In addition, the change of oxidation rate by graphite oxidation degree characterization by burn-off (ratio of the oxidized graphite density to the original density) should be quantified because graphite strength degradation is followed by graphite density decrease, which highly affects oxidation rates and patterns. Because the density change is proportional to the internal pore surface area, they should be quantified in advance. In order to understand the above issues, the following experiments were performed: (1)Experiment on the fracture of the oxidized graphite and validation of the previous correlations, (2) Experiment on the change of oxidation rate using graphite density and data collection, (3) Measure the BET surface area of the graphite. The experiments were performed using H451 (Great Lakes Carbon Corporation) and IG-110 (Toyo Tanso Co., Ltd) graphite. The reason for the use of those graphite materials is because their chemical and mechanical characteristics are well identified by the previous investigations, and therefore it was convenient for us to access the published data, and to apply and validate our new methodologies. This paper presents preliminary results of compressive strength vs. burn-off and surface area density vs. burn-off, which can be used for the nuclear graphite selection for the NGNP.« less

Development of an operation strategy for hydrogen production using solar PV energy based on fluid dynamic aspects

NASA Astrophysics Data System (ADS)

Amores, Ernesto; Rodríguez, Jesús; Oviedo, José; de Lucas-Consuegra, Antonio

2017-06-01

Alkaline water electrolysis powered by renewable energy sources is one of the most promising strategies for environmentally friendly hydrogen production. However, wind and solar energy sources are highly dependent on weather conditions. As a result, power fluctuations affect the electrolyzer and cause several negative effects. Considering these limiting effects which reduce the water electrolysis efficiency, a novel operation strategy is proposed in this study. It is based on pumping the electrolyte according to the current density supplied by a solar PV module, in order to achieve the suitable fluid dynamics conditions in an electrolysis cell. To this aim, a mathematical model including the influence of electrode-membrane distance, temperature and electrolyte flow rate has been developed and used as optimization tool. The obtained results confirm the convenience of the selected strategy, especially when the electrolyzer is powered by renewable energies.

Easy access to nucleophilic boron through diborane to magnesium boryl metathesis

NASA Astrophysics Data System (ADS)

Pécharman, Anne-Frédérique; Colebatch, Annie L.; Hill, Michael S.; McMullin, Claire L.; Mahon, Mary F.; Weetman, Catherine

2017-04-01

Organoboranes are some of the most synthetically valuable and widely used intermediates in organic and pharmaceutical chemistry. Their synthesis, however, is limited by the behaviour of common boron starting materials as archetypal Lewis acids such that common routes to organoboranes rely on the reactivity of boron as an electrophile. While the realization of convenient sources of nucleophilic boryl anions would open up a wealth of opportunity for the development of new routes to organoboranes, the synthesis of current candidates is generally limited by a need for highly reducing reaction conditions. Here, we report a simple synthesis of a magnesium boryl through the heterolytic activation of the B-B bond of bis(pinacolato)diboron, which is achieved by treatment of an easily generated magnesium diboranate complex with 4-dimethylaminopyridine. The magnesium boryl is shown to act as an unambiguous nucleophile through its reactions with iodomethane, benzophenone and N,N'-di-isopropyl carbodiimide and by density functional theory.

A simple solvent method for the recovery of LixCoO2 and its applications in alkaline rechargeable batteries

NASA Astrophysics Data System (ADS)

Xu, Yanan; Song, Dawei; Li, Li; An, Cuihua; Wang, Yijing; Jiao, LiFang; Yuan, Huatang

2014-04-01

A simple solvent method is proposed for the recovery of waste LixCoO2 from lithium-ion batteries, which employs inexpensive DMF to remove the binder of PVDF. This method is convenient to manipulate and low-cost to apply. Electrochemical investigations indicate that recovered LixCoO2 materials with a small amount of S-doping exhibit excellent properties as negative materials for alkaline rechargeable Ni/Co batteries. At the discharge current density of 100 mA g-1, the LixCoO2 + 1% S electrode displays the max discharge capacity of 357 mAh g-1 and outstanding capacity retention rate of 85.5% after 100 cycles. It could overcome not only the sophisticated, energy-intensive shortcomings of conventional recycling methods, but also the high-cost restriction on alkaline rechargeable Ni/Co batteries.

Detailed investigation of a vaporising fuel spray. Part 1: Experimental investigation of time averaged spray

NASA Technical Reports Server (NTRS)

Yule, A. J.; Seng, C. A.; Boulderstone, R.; Ungut, A.; Felton, P. G.; Chigier, N. A.

1980-01-01

A laser tomographic light scattering technique provides rapid and accurate high resolution measurements of droplet sizes, concentrations, and vaporization. Measurements using a computer interfaced thermocouple are presented and it is found that the potential exists for separating gas and liquid temperature measurements and diagnosing local spray density by in situ analysis of the response characteristics of the thermocouple. The thermocouple technique provides a convenient means for measuring mean gas velocity in both hot and cold two phase flows. The experimental spray is axisymmetric and has carefully controlled initial and boundary conditions. The flow is designed to give relatively insignificant transfer of momentum and mass from spray to air flow. The effects of (1) size-dependent droplet dispersion by the turbulence, (2) the initial spatial segregation of droplet sizes during atomization, and (3) the interaction between droplets and coherent large eddies are diagnosed.

Magnetic Shielding Design for Coupler of Wireless Electric Vehicle Charging Using Finite Element Analysis

NASA Astrophysics Data System (ADS)

Zhao, W. N.; Yang, X. J.; Yao, C.; Ma, D. G.; Tang, H. J.

2017-10-01

Inductive power transfer (IPT) is a practical and preferable method for wireless electric vehicle (EV) charging which proved to be safe, convenient and reliable. Due to the air gap between the magnetic coupler, the magnetic field coupling decreases and the magnetic leakage increases significantly compared to traditional transformer, and this may lead to the magnetic flux density around the coupler more than the safety limit for human. So magnetic shielding should be adding to the winding made from litz wire to enhance the magnetic field coupling effect in the working area and reduce magnetic field strength in non-working area. Magnetic shielding can be achieved by adding high-permeability material or high-conductivity material. For high-permeability material its magnetic reluctance is much lower than the surrounding air medium so most of the magnetic line goes through the high-permeability material rather than surrounding air. For high-conductivity material the eddy current in the material can produce reverse magnetic field to achieve magnetic shielding. This paper studies the effect of the two types of shielding material on coupler for wireless EV charging and designs combination shielding made from high-permeability material and high-conductivity material. The investigation of the paper is done with the help of finite element analysis.

High-mobility ultrathin semiconducting films prepared by spin coating.

PubMed

Mitzi, David B; Kosbar, Laura L; Murray, Conal E; Copel, Matthew; Afzali, Ali

2004-03-18

The ability to deposit and tailor reliable semiconducting films (with a particular recent emphasis on ultrathin systems) is indispensable for contemporary solid-state electronics. The search for thin-film semiconductors that provide simultaneously high carrier mobility and convenient solution-based deposition is also an important research direction, with the resulting expectations of new technologies (such as flexible or wearable computers, large-area high-resolution displays and electronic paper) and lower-cost device fabrication. Here we demonstrate a technique for spin coating ultrathin (approximately 50 A), crystalline and continuous metal chalcogenide films, based on the low-temperature decomposition of highly soluble hydrazinium precursors. We fabricate thin-film field-effect transistors (TFTs) based on semiconducting SnS(2-x)Se(x) films, which exhibit n-type transport, large current densities (>10(5) A cm(-2)) and mobilities greater than 10 cm2 V(-1) s(-1)--an order of magnitude higher than previously reported values for spin-coated semiconductors. The spin-coating technique is expected to be applicable to a range of metal chalcogenides, particularly those based on main group metals, as well as for the fabrication of a variety of thin-film-based devices (for example, solar cells, thermoelectrics and memory devices).

High-mobility ultrathin semiconducting films prepared by spin coating

NASA Astrophysics Data System (ADS)

Mitzi, David B.; Kosbar, Laura L.; Murray, Conal E.; Copel, Matthew; Afzali, Ali

2004-03-01

The ability to deposit and tailor reliable semiconducting films (with a particular recent emphasis on ultrathin systems) is indispensable for contemporary solid-state electronics. The search for thin-film semiconductors that provide simultaneously high carrier mobility and convenient solution-based deposition is also an important research direction, with the resulting expectations of new technologies (such as flexible or wearable computers, large-area high-resolution displays and electronic paper) and lower-cost device fabrication. Here we demonstrate a technique for spin coating ultrathin (~50Å), crystalline and continuous metal chalcogenide films, based on the low-temperature decomposition of highly soluble hydrazinium precursors. We fabricate thin-film field-effect transistors (TFTs) based on semiconducting SnS2-xSex films, which exhibit n-type transport, large current densities (>105Acm-2) and mobilities greater than 10cm2V-1s-1-an order of magnitude higher than previously reported values for spin-coated semiconductors. The spin-coating technique is expected to be applicable to a range of metal chalcogenides, particularly those based on main group metals, as well as for the fabrication of a variety of thin-film-based devices (for example, solar cells, thermoelectrics and memory devices).

Seismic peak amplitude as a predictor of TOC content in shallow marine sediments

NASA Astrophysics Data System (ADS)

Neto, Arthur Ayres; Mota, Bruno Bourguignon; Belem, André Luiz; Albuquerque, Ana Luiza; Capilla, Ramsés

2016-10-01

Acoustic remote sensing is a highly effective tool for exploring the seafloor of both deep and shallow marine settings. Indeed, the acoustic response depends on several physicochemical factors such as sediment grain size, bulk density, water content, and mineralogy. The objective of the present study is to assess the suitability of seismic peak amplitude as a predictor of total organic carbon (TOC) content in shallow marine sediments, based on data collected in the Cabo Frio mud belt in an upwelling zone off southeastern Brazil. These comprise records of P-wave velocity ( V P) along 680 km of high-resolution single-channel seismic surveys, combined with analyses of grain size, wet bulk density, absolute water content and TOC content for four piston-cores. TOC contents of sediments from 13 box-cores served to validate the methodology. The results show well-defined positive correlations between TOC content and mean grain size (phi scale) as well as absolute water content, and negative correlations with V P, wet bulk density, and acoustic impedance. These relationships yield a regression equation by which TOC content can be satisfactorily predicted on the basis of acoustic impedance for this region: y = - 4.84 ln( x) + 40.04. Indeed, the derived TOC contents differ by only 5% from those determined by geochemical analysis. After appropriate calibration, acoustic impedance can thus be conveniently used as a predictor of large-scale spatial distributions of organic carbon enrichment in marine sediments. This not only contributes to optimizing scientific project objectives, but also enhances the cost-effectiveness of marine surveys by greatly reducing the ship time commonly required for grid sampling.

An empirical/theoretical model with dimensionless numbers to predict the performance of electrodialysis systems on the basis of operating conditions.

PubMed

Karimi, Leila; Ghassemi, Abbas

2016-07-01

Among the different technologies developed for desalination, the electrodialysis/electrodialysis reversal (ED/EDR) process is one of the most promising for treating brackish water with low salinity when there is high risk of scaling. Multiple researchers have investigated ED/EDR to optimize the process, determine the effects of operating parameters, and develop theoretical/empirical models. Previously published empirical/theoretical models have evaluated the effect of the hydraulic conditions of the ED/EDR on the limiting current density using dimensionless numbers. The reason for previous studies' emphasis on limiting current density is twofold: 1) to maximize ion removal, most ED/EDR systems are operated close to limiting current conditions if there is not a scaling potential in the concentrate chamber due to a high concentration of less-soluble salts; and 2) for modeling the ED/EDR system with dimensionless numbers, it is more accurate and convenient to use limiting current density, where the boundary layer's characteristics are known at constant electrical conditions. To improve knowledge of ED/EDR systems, ED/EDR models should be also developed for the Ohmic region, where operation reduces energy consumption, facilitates targeted ion removal, and prolongs membrane life compared to limiting current conditions. In this paper, theoretical/empirical models were developed for ED/EDR performance in a wide range of operating conditions. The presented ion removal and selectivity models were developed for the removal of monovalent ions and divalent ions utilizing the dominant dimensionless numbers obtained from laboratory scale electrodialysis experiments. At any system scale, these models can predict ED/EDR performance in terms of monovalent and divalent ion removal. Copyright © 2016 Elsevier Ltd. All rights reserved.

3-D lithium ion microbattery

NASA Astrophysics Data System (ADS)

Yeh, Yuting

The lithium-ion battery has emerged as a common power source for portable consumer electronics since its debut two decades ago. Due to the low atomic weight and high electrochemical activity of lithium chemistry, lithium-ion battery has a higher energy density as compared to other battery systems, such as Ni-Cd, Ni-MH, and lead-acid batteries. As a result, use of lithium-ion batteries enables the size of batteries to be effectively reduced without compromising capacity. More importantly, as battery size is reduced, it enhances the applications of portable electronics, increasing the convenience of use. The 3-D battery architecture described in the dissertation is believed to be a new paradigm for future batteries. The architecture features coupled 3-D electrodes to provide better charge/discharge kinetics and a higher charge capacity per footprint area. The overarching objective of this dissertation is to implement the 3-D architecture using the lithium-ion chemistry. The 3-D lithium-ion batteries are designed to provide high areal energy density without compromising power density. The dissertation is comprised of four interrelated sections. First, a simulation was conducted to identify key battery parameters and to define an ideal three-dimensional cell structure. The second part of the research involved identifying fabrication routes to build the 3-D electrode, which was the key design element in the 3-D paradigm. The third part of the dissertation was to correlate the electrode performance with its geometric features. In particular, the influence of aspect ratio was investigated. Lastly, an electrolyte/separator was designed and fabricated based on the existing 3-D electrode configuration. This enabled 3-D battery to be assembled.

Flow Cytometry Pulse Width Data Enables Rapid and Sensitive Estimation of Biomass Dry Weight in the Microalgae Chlamydomonas reinhardtii and Chlorella vulgaris

PubMed Central

Chioccioli, Maurizio; Hankamer, Ben; Ross, Ian L.

2014-01-01

Dry weight biomass is an important parameter in algaculture. Direct measurement requires weighing milligram quantities of dried biomass, which is problematic for small volume systems containing few cells, such as laboratory studies and high throughput assays in microwell plates. In these cases indirect methods must be used, inducing measurement artefacts which vary in severity with the cell type and conditions employed. Here, we utilise flow cytometry pulse width data for the estimation of cell density and biomass, using Chlorella vulgaris and Chlamydomonas reinhardtii as model algae and compare it to optical density methods. Measurement of cell concentration by flow cytometry was shown to be more sensitive than optical density at 750 nm (OD750) for monitoring culture growth. However, neither cell concentration nor optical density correlates well to biomass when growth conditions vary. Compared to the growth of C. vulgaris in TAP (tris-acetate-phosphate) medium, cells grown in TAP + glucose displayed a slowed cell division rate and a 2-fold increased dry biomass accumulation compared to growth without glucose. This was accompanied by increased cellular volume. Laser scattering characteristics during flow cytometry were used to estimate cell diameters and it was shown that an empirical but nonlinear relationship could be shown between flow cytometric pulse width and dry weight biomass per cell. This relationship could be linearised by the use of hypertonic conditions (1 M NaCl) to dehydrate the cells, as shown by density gradient centrifugation. Flow cytometry for biomass estimation is easy to perform, sensitive and offers more comprehensive information than optical density measurements. In addition, periodic flow cytometry measurements can be used to calibrate OD750 measurements for both convenience and accuracy. This approach is particularly useful for small samples and where cellular characteristics, especially cell size, are expected to vary during growth. PMID:24832156

School and residential neighborhood food environment and diet among California youth.

PubMed

An, Ruopeng; Sturm, Roland

2012-02-01

Various hypotheses link neighborhood food environments and diet. Greater exposure to fast-food restaurants and convenience stores is thought to encourage overconsumption; supermarkets and large grocery stores are claimed to encourage healthier diets. For youth, empirical evidence for any particular hypothesis remains limited. This study examines the relationship between school and residential neighborhood food environment and diet among youth in California. Data from 8226 children (aged 5-11 years) and 5236 adolescents (aged 12-17 years) from the 2005 and 2007 California Health Interview Survey were analyzed in 2011. The dependent variables are daily servings of fruits, vegetables, juice, milk, soda, high-sugar foods, and fast food, which were regressed on measures of food environments. Food environments were measured by counts and density of businesses, distinguishing fast-food restaurants, convenience stores, small food stores, grocery stores, and large supermarkets within a specific distance (varying from 0.1 to 1.5 miles) from a respondent's home or school. No robust relationship between food environment and consumption is found. A few significant results are sensitive to small modeling changes and more likely to reflect chance than true relationships. This correlational study has measurement and design limitations. Longitudinal studies that can assess links between environmental, dependent, and intervening food purchase and consumption variables are needed. Reporting a full range of studies, methods, and results is important as a premature focus on correlations may lead policy astray. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Texas nutrition environment assessment of retail food stores (TxNEA-S): development and evaluation.

PubMed

Gloria, Christian T; Steinhardt, Mary A

2010-11-01

Current nutrition environment instruments are typically designed to measure a small number of healthy foods based on national trends. They lack the depth to accurately measure the unique dietary choices of subpopulations, such as Texas consumers whose food preferences are influenced by Hispanic/Latino culture. Thus the purposes of the present study were to: (i) develop a comprehensive observational tool to measure the availability of healthy foods from retail stores in Texas; and (ii) conduct a pilot test to examine the tool's reliability, as well as differences in the availability of healthy foods in stores between high- and low-income neighbourhoods. Grocery and convenience stores were assessed for availability of healthy foods. Reliability was calculated using percentage agreement, and differences in availability were examined using 2 (store type) × 2 (neighbourhood income) ANOVA. One high-income and one low-income neighbourhood in Austin, Texas. A sample of thirty-eight stores comprising twenty-five convenience stores and thirteen grocery stores. The low-income neighbourhood had 324 % more convenience stores and 56 % fewer grocery stores than the high-income neighbourhood. High inter-rater (mean = 0·95) and test-retest reliability (mean = 0·92) and a significant interaction (P = 0·028) between store type and neighbourhood income were found. The TxNEA-S tool includes 106 healthy food items, such as fruits, vegetables, dairy, proteins and grains. The tool is reliable and face validity is affirmed by the Texas Department of Health. Grocery stores have more healthy foods than convenience stores, and high-income grocery stores offer more healthy foods than low-income grocery stores.

Self-assembling synthesis of free-standing nanoporous graphene-transition-metal oxide flexible electrodes for high-performance lithium-ion batteries and supercapacitors.

PubMed

Huang, Xiaodan; Sun, Bing; Chen, Shuangqiang; Wang, Guoxiu

2014-01-01

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self-assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well-controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet-immersion method, transition-metal oxide (Fe3O4, Co3O4, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three-dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium-ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra-high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe3O4-graphene composites can deliver a reversible specific capacity of 1427.5 mAh g(-1) at a high current density of 1000 mA g(-1) as anode materials in lithium-ion batteries. Furthermore, nanoporous Co3O4-graphene composites achieved a high supercapacitance of 424.2 F g(-1) . This work demonstrated that the as-developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Care coordination between convenient care clinics and healthcare homes.

PubMed

Carney Moore, Jeanne Marie; Dolansky, Mary; Hudak, Christine; Kenneley, Irena

2015-05-01

Patient care coordination is foundational to high-quality health care and is a national priority. Since its inception, convenient health care has been criticized for its potential to decrease patient care coordination. The purpose of this study is to investigate care coordination between convenient care clinics and healthcare homes. The care coordination practices of Minute Clinic, which represents over 40% of the convenient care industry, were studied. Patient identification of healthcare homes and consent to transmit visit records were abstracted from the health records of 1,014,249 patients dated July 1 to December 31, 2012. The completeness of record content and timeliness of record transmission were assessed by means of interviewing Minute Clinic's Director of Quality and reviewing patient electronic health records. Minute Clinic attempts to coordinate care with healthcare homes, but opportunities for improved care coordination exist. Increased vigilance on the part of providers, patients, and healthcare systems is needed to mitigate barriers to care coordination. Future research is needed to examine care coordination from multiple convenient care operators and explore how to increase care coordination with healthcare homes. ©2014 American Association of Nurse Practitioners.

Infrastructure for thulium-170 isotope power systems for autonomous underwater vehicle fleets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, C.E.

1991-07-01

The radioisotope thulium-170 is a safe and environmentally benign heat source for providing the high endurance and energy densities needed by advanced power systems for autonomous underwater vehicles (AUV). Thulium Isotope Power (TIP) systems have an endurance of {approximately}3000 h, and gravimetric and volumetric energy densities of 3 {times} 10{sup 4} Wh/kg and 3 {times} 10{sup 8} Wh/m{sup 3}, respectively. These energy densities are more than 200 times higher than those currently provided by Ag-Zn battery technology. In order to capitalize on these performance levels with about one hundred AUVs in continuous use, it will be necessary to establish anmore » infrastructure for isotope production and heat-source refurbishment. The infrastructure cost is not trivial, and studies are needed to determine its optimum configuration. The major component of the projected infrastructure is the nuclear reactor used to produce Tm- 170 by neutron absorption in Tm-169. The reactor design should ideally be optimized for TM-170 production. Using the byproduct waste'' heat beneficially would help defray the cost of isotope production. However, generating electric power with the reactor would compromise both the cost of electricity and the isotope production capacity. A coastal location for the reactor would be most convenient from end-use considerations, and the waste'' heat could be used to desalinate seawater in water-thirsty states. 13 refs., 6 figs., 2 tabs.« less

Reversible and nonvolatile ferroelectric control of two-dimensional electronic transport properties of ZrCuSiAs-type copper oxyselenide thin films with a layered structure

NASA Astrophysics Data System (ADS)

Zhao, Xu-Wen; Gao, Guan-Yin; Yan, Jian-Min; Chen, Lei; Xu, Meng; Zhao, Wei-Yao; Xu, Zhi-Xue; Guo, Lei; Liu, Yu-Kuai; Li, Xiao-Guang; Wang, Yu; Zheng, Ren-Kui

2018-05-01

Copper-based ZrCuSiAs-type compounds of LnCuChO (Ln =Bi and lanthanides, Ch =S , Se, Te) with a layered crystal structure continuously attract worldwide attention in recent years. Although their high-temperature (T ≥ 300 K) electrical properties have been intensively studied, their low-temperature electronic transport properties are little known. In this paper, we report the integration of ZrCuSiAs-type copper oxyselenide thin films of B i0.94P b0.06CuSeO (BPCSO) with perovskite-type ferroelectric Pb (M g1 /3N b2 /3 ) O3-PbTi O3 (PMN-PT) single crystals in the form of ferroelectric field effect devices that allow us to control the electronic properties (e.g., carrier density, magnetoconductance, dephasing length, etc.) of BPCSO films in a reversible and nonvolatile manner by polarization switching at room temperature. Combining ferroelectric gating and magnetotransport measurements with the Hikami-Larkin-Nagaoka theory, we demonstrate two-dimensional (2D) electronic transport characteristics and weak antilocalization effect as well as strong carrier-density-mediated competition between weak antilocalization and weak localization in BPCSO films. Our results show that ferroelectric gating using PMN-PT provides an effective and convenient approach to probe the carrier-density-related 2D electronic transport properties of ZrCuSiAs-type copper oxyselenide thin films.

432- μm laser's beam-waist measurement for the polarimeter/interferometer on the EAST tokamak

NASA Astrophysics Data System (ADS)

Wang, Z. X.; Liu, H. Q.; Jie, Y. X.; Wu, M. Q.; Lan, T.; Zhu, X.; Zou, Z. Y.; Yang, Y.; Wei, X. C.; Zeng, L.; Li, G. S.; Gao, X.

2014-10-01

A far-infrared (FIR) polarimeter/interferometer (PI) system is under development for measurements of the current-density and the electron-density profiles in the EAST tokamak. The system will utilize three identical 432- μm CHCOOH lasers pumped by a CO2 laser. Measurements of the laser beam's waist size and position are basic works. This paper will introduce three methods with a beam profiler and several focusing optical elements. The beam profiler can be used to show the spatial energy distribution of the laser beam. The active area of the profiler is 12.4 × 12.4 mm2. Some focusing optical elements are needed to focus the beam in order for the beam profiler to receive the entire laser beam. Two principles and three methods are used in the measurement. The first and the third methods are based on the same principle, and the second method adopts an other principle. Due to the fast and convenient measurement, although the first method is a special form of the third and it can only give the size of beam waist, it is essential to the development of the experiment and it can provide guidance for the choices of the sizes of the optical elements in the next step. A concave mirror, a high-density polyethylene (HDPE) lens and a polymethylpentene (TPX) lens are each used in the measurement process. The results of these methods are close enough for the design of PI system's optical path.

USSR and Eastern Europe Scientific Abstracts. Engineering and Equipment, Nubmer 28.

DTIC Science & Technology

1977-02-04

with a gas of negligibly low density^ The fluid is in a magnetic field with intensity vector H*, a gravitational field ng ( g » 9.81 m/sec , n = the...account. The^axis of symmetry of the vessel is anticollinear to the vector g . Basic equations are presented in a form that is convenient for...REQUIREMENTS OF THE NEW SNiP STANDARD MOSCOW STROITEL’STVO TRUBOPROVODOV No 8, Aug 76, pp 31-33 PROKOF’YEV, V.l., AND KAMERSHTEYN, A. G . Abstract

Density-dependent liquid nitromethane decomposition: molecular dynamics simulations based on ReaxFF.

PubMed

Rom, Naomi; Zybin, Sergey V; van Duin, Adri C T; Goddard, William A; Zeiri, Yehuda; Katz, Gil; Kosloff, Ronnie

2011-09-15

The decomposition mechanism of hot liquid nitromethane at various compressions was studied using reactive force field (ReaxFF) molecular dynamics simulations. A competition between two different initial thermal decomposition schemes is observed, depending on compression. At low densities, unimolecular C-N bond cleavage is the dominant route, producing CH(3) and NO(2) fragments. As density and pressure rise approaching the Chapman-Jouget detonation conditions (∼30% compression, >2500 K) the dominant mechanism switches to the formation of the CH(3)NO fragment via H-transfer and/or N-O bond rupture. The change in the decomposition mechanism of hot liquid NM leads to a different kinetic and energetic behavior, as well as products distribution. The calculated density dependence of the enthalpy change correlates with the change in initial decomposition reaction mechanism. It can be used as a convenient and useful global parameter for the detection of reaction dynamics. Atomic averaged local diffusion coefficients are shown to be sensitive to the reactions dynamics, and can be used to distinguish between time periods where chemical reactions occur and diffusion-dominated, nonreactive time periods. © 2011 American Chemical Society

The Havriliak-Negami relaxation and its relatives: the response, relaxation and probability density functions

NASA Astrophysics Data System (ADS)

Górska, K.; Horzela, A.; Bratek, Ł.; Dattoli, G.; Penson, K. A.

2018-04-01

We study functions related to the experimentally observed Havriliak-Negami dielectric relaxation pattern proportional in the frequency domain to [1+(iωτ0){\\hspace{0pt}}α]-β with τ0 > 0 being some characteristic time. For α = l/k< 1 (l and k being positive and relatively prime integers) and β > 0 we furnish exact and explicit expressions for response and relaxation functions in the time domain and suitable probability densities in their domain dual in the sense of the inverse Laplace transform. All these functions are expressed as finite sums of generalized hypergeometric functions, convenient to handle analytically and numerically. Introducing a reparameterization β = (2-q)/(q-1) and τ0 = (q-1){\\hspace{0pt}}1/α (1 < q < 2) we show that for 0 < α < 1 the response functions fα, β(t/τ0) go to the one-sided Lévy stable distributions when q tends to one. Moreover, applying the self-similarity property of the probability densities gα, β(u) , we introduce two-variable densities and show that they satisfy the integral form of the evolution equation.

Effects of Acids, Bases, and Heteroatoms on Proximal Radial Distribution Functions for Proteins.

PubMed

Nguyen, Bao Linh; Pettitt, B Montgomery

2015-04-14

The proximal distribution of water around proteins is a convenient method of quantifying solvation. We consider the effect of charged and sulfur-containing amino acid side-chain atoms on the proximal radial distribution function (pRDF) of water molecules around proteins using side-chain analogs. The pRDF represents the relative probability of finding any solvent molecule at a distance from the closest or surface perpendicular protein atom. We consider the near-neighbor distribution. Previously, pRDFs were shown to be universal descriptors of the water molecules around C, N, and O atom types across hundreds of globular proteins. Using averaged pRDFs, a solvent density around any globular protein can be reconstructed with controllable relative error. Solvent reconstruction using the additional information from charged amino acid side-chain atom types from both small models and protein averages reveals the effects of surface charge distribution on solvent density and improves the reconstruction errors relative to simulation. Solvent density reconstructions from the small-molecule models are as effective and less computationally demanding than reconstructions from full macromolecular models in reproducing preferred hydration sites and solvent density fluctuations.

Preparation of Cobalt-Based Electrodes by Physical Vapor Deposition on Various Nonconductive Substrates for Electrocatalytic Water Oxidation.

PubMed

Wu, Yizhen; Wang, Le; Chen, Mingxing; Jin, Zhaoxia; Zhang, Wei; Cao, Rui

2017-12-08

Artificial photosynthesis requires efficient anodic electrode materials for water oxidation. Cobalt metal thin films are prepared through facile physical vapor deposition (PVD) on various nonconductive substrates, including regular and quartz glass, mica sheet, polyimide, and polyethylene terephthalate (PET). Subsequent surface electrochemical modification by cyclic voltammetry (CV) renders these films active for electrocatalytic water oxidation, reaching a current density of 10 mA cm -2 at a low overpotential of 330 mV in 1.0 m KOH solution. These electrodes are robust with unchanged activity throughout prolonged chronopotentiometry measurements. This work is thus significant to show that the combination of PVD and CV is very valuable and convenient to fabricate active electrodes on various nonconductive substrates, particularly with flexible polyimide and PET substrates. This efficient, safe and convenient method can potentially be expanded to many other electrochemical applications. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Highly selective and sensitive turn-on fluorescent sensor for detection of Al3+ based on quinoline-base Schiff base

NASA Astrophysics Data System (ADS)

Wang, Yang; Ma, Zhong-Ying; Zhang, De-Long; Deng, Jia-Li; Chen, Xiong; Xie, Cheng-Zhi; Qiao, Xin; Li, Qing-Zhong; Xu, Jing-Yuan

2018-04-01

A new aluminum ion fluorescent probe (4-(diethylamino)-2-hydroxybenzylidene)isoquinoline-1-carbohydrazide (HL1) has been conveniently synthesized and characterized. HL1 exhibited a highly selective and pronounced enhancement for Al3+ in the fluorescence emission over other common cations by forming a 2:1 complex, with a recognition mechanism based on excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT). The strong fluorescent emission can be observed even at ppm level concentration of the probe in the presence of Al3+ with 41 fold intensity enhancement at 545 nm. HL1 displays good linear relationship with Al3+ in the low concentration and the limit of detection is 8.08 × 10-8 mol/L. Similar molecules with different substituents on salicylaldehyde phenyl ring were synthesized for studying the structure-activity relationship. Density-functional theory (DFT) calculations are in agreement with the proposed mechanism. It is confirmed that HL1 could be used to detect Al3+ ions in real sample by fluorescence spectrometry and Al3+ ions in cells by bioimaging.

Heterocyclic energetic materials: Synthesis, characterization and computational design

NASA Astrophysics Data System (ADS)

Tsyshevsky, Roman; Pagoria, Philip; Smirnov, Aleksander; Kuklja, Maija

2017-06-01

Achievement of the tailored properties (high performance, low sensitivity, etc.) in targeted new energetic materials (EM) remains a great challenge. Recently, attention of researchers has shifted from conventional nitroester-, nitramine-, and nitroaromatic-based explosives to new heterocyclic EM with oxygen- and nitrogenrich molecular structures. They have increased densities and formation enthalpies complemented by attractive performance and high stability to external stimuli. We will demonstrate that oxadiazol-containing heterocycles offer a convenient playground to probe specific chemical functional groups as building blocks for design of EM. We discuss a joint experimental and computational approach for design, characterization, synthesis, and modeling of novel heterocyclic EM. Combinatorically, we comprehensively analyzed how overall stability and performance of each material in the family (BNFF, LLM-172, LLM-175, LLM-191, LLM-192, LLM-200) depends upon their chemical composition and details of the molecular structure (such as a substitution of a nitro group by an amino group and 1,2,5-oxadiazole fragment by 1,2,3- or 1,2,4-oxadiazol ring). We will also discuss proposed new EM with predicted superior chemical and physical properties. P. Pagoria, R. Tsyshevsky, A. Smirnov.

Simple and strong: twisted silver painted nylon artificial muscle actuated by Joule heating

NASA Astrophysics Data System (ADS)

Mirvakili, Seyed M.; Rafie Ravandi, Ali; Hunter, Ian W.; Haines, Carter S.; Li, Na; Foroughi, Javad; Naficy, Sina; Spinks, Geoffrey M.; Baughman, Ray H.; Madden, John D. W.

2014-03-01

Highly oriented nylon and polyethylene fibres shrink in length when heated and expand in diameter. By twisting and then coiling monofilaments of these materials to form helical springs, the anisotropic thermal expansion has recently been shown to enable tensile actuation of up to 49% upon heating. Joule heating, by passing a current through a conductive coating on the surface of the filament, is a convenient method of controlling actuation. In previously reported work this has been done using highly flexible carbon nanotube sheets or commercially available silver coated fibres. In this work silver paint is used as the Joule heating element at the surface of the muscle. Up to 29% linear actuation is observed with energy and power densities reaching 840 kJ m-3 (528 J kg-1) and 1.1 kW kg-1 (operating at 0.1 Hz, 4% strain, 1.4 kg load). This simple coating method is readily accessible and can be applied to any polymer filament. Effective use of this technique relies on uniform coating to avoid temperature gradients.

A high performance quasi-solid-state supercapacitor based on CuMnO2 nanoparticles

NASA Astrophysics Data System (ADS)

Wang, Lu; Arif, Muhammad; Duan, Guorong; Chen, Shenming; Liu, Xiaoheng

2017-07-01

Mixed metal or transition metal oxides hold an unveiled potential as one of the most promising energy storage material because of their excellent stability, reliable conductivity, and convenient use. In this work, CuMnO2 nanoparticles are successfully prepared by a facile hydrothermal process with the help of dispersing agent cetyltrimethylammonium bromide (CTAB). CuMnO2 nanoparticles possess a uniform quadrilateral shape, small size (approximately 25 × 25 nm-35 × 35 nm), excellent dispersity, and large specific surface specific (56.9 m2 g-1) with an interparticle mesoporous structure. All these characteristics can bring benefit for their application in supercapacitor. A quasi-solid-state symmetric supercapacitor device is assembled by using CuMnO2 nanoparticles as both positive electrode and negative electrode. The device exhibits good supercapacitive performance with a high specific capacitance (272 F g-1), a maximum power density of 7.56 kW kg-1 and a superior cycling stability of 18,000 continuous cycles, indicating an excellent potential to be used in energy storage device.

A global model of the neutral thermosphere in magnetic coordinates based on AE-C data

NASA Technical Reports Server (NTRS)

Stehle, C. G.

1980-01-01

An empirical model of the global atomic oxygen and helium distributions in the thermosphere is developed in a magnetic coordinate system and compared to similar models which are expanded in geographic coordinates. The advantage of using magnetic coordinates is that fewer terms are needed to make predictions which are nearly identical to those which would be obtained from a geographic model with longitudinal and universal time corrections. Magnetic coordinates are more directly related to the major energy inputs in the polar regions than geographic coordinates and are more convenient to use in studies of high latitude energy deposition processes. This is important for comparison with theoretical models where the number of coordinates is limited. The effect of magnetic activity on the atomic oxygen distribution in the morning sector of the high latitude thermosphere in the auroral zone is also considered. A magnetic activity indicator (ML) based on an auroral electrojet index (AL) and the 3 hour ap index are used to relate the atomic oxygen density variations to magnetic activity in this region.

A 3D Scan Model and Thermal Image Data Fusion Algorithms for 3D Thermography in Medicine

PubMed Central

Klima, Ondrej

2017-01-01

Objectives At present, medical thermal imaging is still considered a mere qualitative tool enabling us to distinguish between but lacking the ability to quantify the physiological and nonphysiological states of the body. Such a capability would, however, facilitate solving the problem of medical quantification, whose presence currently manifests itself within the entire healthcare system. Methods A generally applicable method to enhance captured 3D spatial data carrying temperature-related information is presented; in this context, all equations required for other data fusions are derived. The method can be utilized for high-density point clouds or detailed meshes at a high resolution but is conveniently usable in large objects with sparse points. Results The benefits of the approach are experimentally demonstrated on 3D thermal scans of injured subjects. We obtained diagnostic information inaccessible via traditional methods. Conclusion Using a 3D model and thermal image data fusion allows the quantification of inflammation, facilitating more precise injury and illness diagnostics or monitoring. The technique offers a wide application potential in medicine and multiple technological domains, including electrical and mechanical engineering. PMID:29250306

High density group IV semiconductor nanowire arrays fabricated in nanoporous alumina templates

NASA Astrophysics Data System (ADS)

Redwing, Joan M.; Dilts, Sarah M.; Lew, Kok-Keong; Cranmer, Alexana E.; Mohney, Suzanne E.

2005-11-01

The fabrication of high density arrays of semiconductor nanowires is of interest for nanoscale electronics, chemical and biological sensing and energy conversion applications. We have investigated the synthesis, intentional doping and electrical characterization of Si and Ge nanowires grown by the vapor-liquid-solid (VLS) method in nanoporous alumina membranes. Nanoporous membranes provide a convenient platform for nanowire growth and processing, enabling control of wire diameter via pore size and the integration of contact metals for electrical testing. For VLS growth in nanoporous materials, reduced pressures and temperatures are required in order to promote the diffusion of reactants into the pore without premature decomposition on the membrane surface or pore walls. The effect of growth conditions on the growth rate of Si and Ge nanowires from SiH 4 and GeH 4 sources, respectively, was investigated and compared. In both cases, the measured activation energies for nanowire growth were substantially lower than activation energies typically reported for Si and Ge thin film deposition under similar growth conditions, suggesting that gold plays a catalytic role in the VLS growth process. Intentionally doped SiNW arrays were also prepared using trimethylboron (TMB) and phosphine (PH 3) as p-type and n-type dopant sources, respectively. Nanowire resistivities were calculated from plots of the array resistance as a function of nanowire length. A decrease in resistivity was observed for both n-type and p-type doped SiNW arrays compared to those grown without the addition of a dopant source.

Microwave-Induced Interfacial Nanobubbles.

PubMed

Wang, Lei; Miao, Xiaojun; Pan, Gang

2016-11-01

A new method for generating nanobubbles via microwave irradiation was verified and quantified. AFM measurement showed that nanobubbles with diameters ranging from 200 to 600 nm were generated at a water-HOPG surface by applying microwave radiation to aqueous solutions with 9.0-30.0 mg/L dissolved oxygen. Graphite displays strong microwave absorption and transmits high thermal energy to the surface. Because of the high dielectric constant (20 °C, 80 F/m) and dielectric loss factor, water molecules have a strong ability to absorb microwave radiation. The thermal and nonthermal effects of microwave radiation made contributions to decreasing the gas solubility, thus facilitating nanobubble nucleation. The yield of nanobubbles increased about 10-fold when the irradiation time increased from 60 to 120 s at 200 W of microwave radiation. The nanobubble density increased from 0.8 to 15 μm -2 by improving the working power from 200 to 600 W. An apparent improvement in nanobubbles yield was obtained between 300 and 400 W, and the resulting temperature was 34-52 °C. When the initial dissolved oxygen increased from 11.3 to 30.0 mg/L, the density of nanobubbles increased from 1.2 to 13 μm -2 . The generation of nanobubbles could be well controlled by adjusting the gas concentration, microwave power, or irradiation time. The method may be valuable in preparing surface nanobubbles quickly and conveniently for various applications, such as catalysis, hypoxia/anoxia remediation, and templates for preparing nanoscale materials.

Identification, display, and use of symmetry elements in atomic and electronic structure models.

PubMed

Khosrovani, N; Kung, P W; Freeman, C M; Gorman, A M; Kölmel, C M; Levine, S M; Newsam, J M

1999-01-01

Crystallographic symmetry plays an important role in structure determination from diffraction or scattering data, in spectroscopy and in simulations. It is convenient and insightful to integrate the display and use of such symmetry data with data analysis and modeling methods. We outline the integration of a suite of crystallographic algorithms, closely coupled with interactive graphical displays. These include techniques for identifying the unit cell of a solid, for automatically determining space and point group symmetries, for generalized displays of symmetry elements overlaid on structural models, and for construction, editing, and transformation of models subject to symmetry constraints. In addition, electron densities derived from periodic density functional calculations can be symmetrized and displayed with the corresponding symmetry elements. Applications of these various capabilities in crystallographic research are illustrated by topical examples.

Neighbourhood food environment and dietary intakes in adolescents: sex and perceived family affluence as moderators.

PubMed

Ho, Sai-Yin; Wong, Bonny Yee-Man; Lo, Wing-Sze; Mak, Kwok-Kei; Thomas, G Neil; Lam, Tai-Hing

2010-10-01

To examine the effects of perceived availability of fast-food shops, restaurants, and convenience stores on adolescent dietary intakes. Survey data from 34 369 students in 42 Hong Kong secondary schools were collected in 2006-7. Respondents reported the availability of fast-food shops, restaurants and convenience stores in the neighbourhood, and their intakes of fruit, vegetables, high-fat foods and junk food/soft drinks. For intakes of high-fat foods and junk food/ soft drinks, ≤ once a week was defined as low consumption and the rest moderate/high consumption. At least three servings of vegetables and two servings of fruit daily were defined as sufficient consumption. Logistic regression yielded adjusted odds ratios (OR) for each dietary intake in relation to the reported food shops. Potential effect modifications by socio-demographic factors were also examined. Perceived availability of fast-food shops and convenience stores were positively associated with moderate/high consumptions of high-fat foods (OR(fast) =1.10 and OR(con) =1.15) and junk food/soft drinks (OR(fast)=1.10 and OR(con) =1.10). Significant negative associations of the perceived availability of restaurants with intakes of vegetables and fruit were observed (OR(veg) =0.87 and OR(fruit) =0.83). The positive relationship between reporting fast-food shops with intake of junk food/soft drinks were observed only in boys and those with low perceived family affluence. The negative association of reporting restaurants with fruit consumption was found in those with low and middle perceived family affluence only. Perceived availability of neighbourhood fast-food shops, restaurants, and convenience stores may have a negative impact on adolescent dietary intakes particularly for those from poorer families.

A model for collisionally induced disturbed structure in disk galaxies

NASA Technical Reports Server (NTRS)

Gerber, Richard A.; Lamb, Susan A.

1994-01-01

We derive analytic expressions, using the impulse and epicycle approximations, which describe the kinematic response of a disk galaxy following a collision with a second spherical galaxy which collides perpendicular to, but not through the center of, the disk. This model can reporduce the morphologies found in n-body experiments in which distant encounters produce two-armed spiral patterns and more central collisions produce rings in the disk galaxy, thereby confirming that simple kinematics can be used to describe the early evolution of these systems. Application of this procedure provides a convenient method with which to conduct parameter studies of these collisions. Comparison of the kinematic description with a fully self-gravitating, three-dimensional n-body/gasdynamics computer model shows that the disk galaxy's response is initially well represented by the kinematic model but that the self-gravity of the disk becomes important at longer times after the collision. The flows of gas and stars decouple from one another where stellar orbits cross, leaving regions of elevated gas density behind as the stars move freely past each other. If star formation rates are enhanced in these regions of high gas density, active star formation could be taking place where there is no corresponding dense feature in the old stellar population.

Facile synthesis of amorphous FeOOH/MnO2 composites as screen-printed electrode materials for all-printed solid-state flexible supercapacitors

NASA Astrophysics Data System (ADS)

Lu, Qiang; Liu, Li; Yang, Shuanglei; Liu, Jun; Tian, Qingyong; Yao, Weijing; Xue, Qingwen; Li, Mengxiao; Wu, Wei

2017-09-01

More convenience and intelligence life lead by flexible/wearable electronics requires innovation and hommization of power sources. Here, amorphous FeOOH/MnO2 composite as screen-printed electrode materials for supercapacitors (SCs) is synthesized by a facile method, and solid-state flexible SCs with aesthetic design are fabricated by fully screen-printed process on different substrates, including PET, paper and textile. The amorphous FeOOH/MnO2 composite shows a high specific capacitance and a good rate capability (350.2 F g-1 at a current density of 0.5 A g-1 and 159.5 F g-1 at 20 A g-1). It also possesses 95.6% capacitance retention even after 10 000 cycles. Moreover, the all-printed solid-state flexible SC device exhibits a high area specific capacitance of 5.7 mF cm-2 and 80% capacitance retention even after 2000 cycles. It also shows high mechanical flexibility. Simultaneously, these printed SCs on different substrates in series are capable to light up a 1.9 V yellow light emitting diode (LED), even after bending and stretching.

High-efficiency and conveniently recyclable photo-catalysts for dye degradation based on urchin-like CuO microparticle/polymer hybrid composites

NASA Astrophysics Data System (ADS)

Liu, Xiong; Cheng, Yuming; Li, Xuefeng; Dong, Jinfeng

2018-05-01

In this work, we developed a new type of photo-catalysts composed of the urchin-like cupric oxide (CuO) microparticle and polyvinylidene fluoride (PVDF) hybrid composites by the convenient organic-inorganic hybrid strategy, which show high-efficiency and conveniently recyclable for dye degradation including methylene blue (MB), Congo red (CR), and malachite green (MG) by visible light irradiation. The micro-structural characteristics of urchin-like CuO microparticles are crucial and dominant over the photo-degrading efficiency of hybrid catalyst because of their highly exposed {0 0 2} facet and larger specific surface area. Simultaneously, the intrinsic porous framework of PVDF membrane not only remains the excellent photo-catalytic activity of urchin-like CuO microparticles but also facilitates the enrichment of dyes on the membrane, and thereby synergistically contributing to the photo-catalytic efficiency. The microstructures of both urchin-like CuO microparticles and hybrid catalysts are systematically characterized by various techniques including scanning electron microscopy (SEM), transmission electron microscope (TEM), high-resolution transmission electron microscope (HRTEM), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption/desorption isotherms, which evidently support the mentioned mechanism.

Healthful Nutrition of Foods in Navajo Nation Stores: Availability and Pricing.

PubMed

Kumar, Gayathri; Jim-Martin, Sonlatsa; Piltch, Emily; Onufrak, Stephen; McNeil, Carrie; Adams, Laura; Williams, Nancy; Blanck, Heidi M; Curley, Larry

2016-09-01

Low availability and affordability of healthier foods in food stores on the Navajo Nation (NN) may be a community-level risk factor for the high prevalence of obesity among the Navajo people. This study assessed the availability and pricing of foods and beverages in supermarkets and convenience stores throughout the NN. Descriptive study design using the Nutrition Environment Measurement Survey in Stores audit tool. Supermarkets (n = 13) and convenience stores (n = 50) on NN and border-town supermarkets (n = 9). Not applicable. Availability and pricing of healthy and less-healthy foods. Descriptive and χ(2) analyses. Navajo convenience stores offered fewer healthier food options compared to Navajo supermarkets. In Navajo convenience stores, 100% whole grain products, reduced-fat cheese, lean meats, reduced-fat chips, and fat-free or light hot dogs were available in fewer stores than their corresponding less-healthy versions (all with p < .05). In both Navajo supermarkets and convenience stores, 100% whole wheat bread, lean cold cuts, and reduced-fat cheese were all more expensive per unit than their corresponding less-healthy versions (all with p < .05). According to this study, healthier foods are not as readily available in Navajo convenience stores as they are in Navajo supermarkets. Improving access to and affordability of healthier foods in reservation stores of all sizes may support healthy eating among Navajo residents. © 2016 by American Journal of Health Promotion, Inc.

Scaling relations for a needle-like electron beam plasma from the self-similar behavior in beam propagation

NASA Astrophysics Data System (ADS)

Bai, Xiaoyan; Chen, Chen; Li, Hong; Liu, Wandong; Chen, Wei

2017-10-01

Scaling relations of the main parameters of a needle-like electron beam plasma (EBP) to the initial beam energy, beam current, and discharge pressures are presented. The relations characterize the main features of the plasma in three parameter space and can provide great convenience in plasma design with electron beams. First, starting from the self-similar behavior of electron beam propagation, energy and charge depositions in beam propagation were expressed analytically as functions of the three parameters. Second, according to the complete coupled theoretical model of an EBP and appropriate assumptions, independent equations controlling the density and space charges were derived. Analytical expressions for the density and charges versus functions of energy and charge depositions were obtained. Finally, with the combination of the expressions derived in the above two steps, scaling relations of the density and potential to the three parameters were constructed. Meanwhile, numerical simulations were used to test part of the scaling relations.

Optimization of constrained density functional theory

NASA Astrophysics Data System (ADS)

O'Regan, David D.; Teobaldi, Gilberto

2016-07-01

Constrained density functional theory (cDFT) is a versatile electronic structure method that enables ground-state calculations to be performed subject to physical constraints. It thereby broadens their applicability and utility. Automated Lagrange multiplier optimization is necessary for multiple constraints to be applied efficiently in cDFT, for it to be used in tandem with geometry optimization, or with molecular dynamics. In order to facilitate this, we comprehensively develop the connection between cDFT energy derivatives and response functions, providing a rigorous assessment of the uniqueness and character of cDFT stationary points while accounting for electronic interactions and screening. In particular, we provide a nonperturbative proof that stable stationary points of linear density constraints occur only at energy maxima with respect to their Lagrange multipliers. We show that multiple solutions, hysteresis, and energy discontinuities may occur in cDFT. Expressions are derived, in terms of convenient by-products of cDFT optimization, for quantities such as the dielectric function and a condition number quantifying ill definition in multiple constraint cDFT.

Density perturbations in general modified gravitational theories

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Felice, Antonio; Tsujikawa, Shinji; Mukohyama, Shinji

2010-07-15

We derive the equations of linear cosmological perturbations for the general Lagrangian density f(R,{phi},X)/2+L{sub c}, where R is a Ricci scalar, {phi} is a scalar field, and X=-{partial_derivative}{sup {mu}{phi}{partial_derivative}}{sub {mu}{phi}/}2 is a field kinetic energy. We take into account a nonlinear self-interaction term L{sub c}={xi}({phi}) {open_square}{phi}({partial_derivative}{sup {mu}{phi}{partial_derivative}}{sub {mu}{phi}}) recently studied in the context of ''Galileon'' cosmology, which keeps the field equations at second order. Taking into account a scalar-field mass explicitly, the equations of matter density perturbations and gravitational potentials are obtained under a quasistatic approximation on subhorizon scales. We also derive conditions for the avoidance of ghosts and Laplacianmore » instabilities associated with propagation speeds. Our analysis includes most of modified gravity models of dark energy proposed in literature; and thus it is convenient to test the viability of such models from both theoretical and observational points of view.« less

Investigation of laser-induced iodine fluorescence for the measurement of density in compressible flows

NASA Technical Reports Server (NTRS)

Mcdaniel, J. C., Jr.

1982-01-01

Laser induced fluorescence is an attractive nonintrusive approach for measuring molecular number density in compressible flows although this technique does not produce a signal that is directly related to the number density. Saturation and frequency detuned excitation are explored as means for minimizing the quenching effect using iodine as the molecular system because of its convenient absorption spectrum. Saturation experiments indicate that with available continuous wave laser sources of Gaussian transverse intensity distribution only partial saturation could be achieved in iodine at the pressures of interest in gas dynamics. Using a fluorescence lineshape theory, it is shown that for sufficiently large detuning of a narrow bandwidth laser from a molecular transition, the quenching can be cancelled by collisional broadening over a large range of pressures and temperatures. Experimental data obtained in a Mach 4.3 underexpanded jet of nitrogen seeded with iodine for various single mode argon laser detunings from a strong iodine transition at 5145 A are discussed.

Thermal treatment effects on charge storage performance of graphene-based materials for supercapacitors.

PubMed

Zhang, Hongxin; Bhat, Vinay V; Gallego, Nidia C; Contescu, Cristian I

2012-06-27

Graphene materials were synthesized by reduction of exfoliated graphite oxide and then thermally treated in nitrogen to improve the surface area and their electrochemical performance as electrical double-layer capacitor electrodes. The structural and surface properties of the prepared reduced graphite oxide (RGO) were investigated using atomic force microscopy, scanning electron microscopy, Raman spectra, X-ray diffraction pattern analysis, and nitrogen adsorption/desorption studies. RGO forms a continuous network of crumpled sheets, which consist of large amounts of few-layer and single-layer graphenes. Electrochemical studies were conducted by cyclic voltammetry, impedance spectroscopy, and galvanostatic charge-discharge measurements. The modified RGO materials showed enhanced electrochemical performance, with maximum specific capacitance of 96 F/g, energy density of 12.8 Wh/kg, and power density of 160 kW/kg. These results demonstrate that thermal treatment of RGO at selected conditions is a convenient and efficient method for improving its specific capacitance, energy, and power density.

Estimation of Mesospheric Densities at Low Latitudes Using the Kunming Meteor Radar Together With SABER Temperatures

NASA Astrophysics Data System (ADS)

Yi, Wen; Xue, Xianghui; Reid, Iain M.; Younger, Joel P.; Chen, Jinsong; Chen, Tingdi; Li, Na

2018-04-01

Neutral mesospheric densities at a low latitude have been derived during April 2011 to December 2014 using data from the Kunming meteor radar in China (25.6°N, 103.8°E). The daily mean density at 90 km was estimated using the ambipolar diffusion coefficients from the meteor radar and temperatures from the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument. The seasonal variations of the meteor radar-derived density are consistent with the density from the Mass Spectrometer and Incoherent Scatter (MSIS) model, show a dominant annual variation, with a maximum during winter, and a minimum during summer. A simple linear model was used to separate the effects of atmospheric density and the meteor velocity on the meteor radar peak detection height. We find that a 1 km/s difference in the vertical meteor velocity yields a change of approximately 0.42 km in peak height. The strong correlation between the meteor radar density and the velocity-corrected peak height indicates that the meteor radar density estimates accurately reflect changes in neutral atmospheric density and that meteor peak detection heights, when adjusted for meteoroid velocity, can serve as a convenient tool for measuring density variations around the mesopause. A comparison of the ambipolar diffusion coefficient and peak height observed simultaneously by two co-located meteor radars indicates that the relative errors of the daily mean ambipolar diffusion coefficient and peak height should be less than 5% and 6%, respectively, and that the absolute error of the peak height is less than 0.2 km.

[Effects of creating a tunnel through intercondylar fossa under arthroscopy for the treatment of complex tears at the medial meniscus posterior horn].

PubMed

Dong, Ling-Dai; Bing, Chang-Jian; Li, Jian-Lin; Cai, Yue

2017-04-25

To discuss the advantages of the arthroscopic treatment for complex tears of the medial meniscus posterior horn by creating a tunnel passageway through the intercondylar fossa. All 127 patients including 24 males and 103 females with complex tears at the medial meniscus posterior horn were reviewed. The age of all patients ranged from 45 to 78 years old, with an average of 67 years old. All 127 patients were treated with partial meniscectomy, in which 112 patients were treated with partial meniscectomy smoothly with three incisions (anterior medial incision, anterior lateral incision, high anterior lateral incision), and 15 patients were treated with four incisions (anterior medial incision, anterior lateral incision, high anterior lateral incision, posterior medial incision). Four aspects were estimated:whether the meniscus posterior horns could be observed totally and conveniently, whether tools could be pushed to target area conveniently, the damage of adjacent cartilages, operation time(the operation time of partial meniscectomy). Posterior horns of all patients were totally and conveniently observed, tools were conveniently pushed to the target area in all cases, and all the cases had no iatrogenic injuries at adjacent cartilages. The operation time of partial meniscectomy at posterior horns with three incisions ranged from 5 to 10 minutes, and it ranged from 10 to 30 minutes with four incisions. It is very convenient and fast of the arthroscopy to treat complex tears of the medial meniscus posterior horn by creating a tunnel through the intercondylor fossa. Iatrogenic injuries of the adjacent cartilages were prevented to the greatest extent.

What factors are associated with frequent unhealthy snack-food consumption among Australian secondary-school students?

PubMed

Niven, Philippa; Scully, Maree; Morley, Belinda; Baur, Louise; Crawford, David; Pratt, Iain S; Wakefield, Melanie

2015-08-01

To examine demographic and behavioural correlates of unhealthy snack-food consumption among Australian secondary-school students and the association between their perceptions of availability, convenience and intake with consumption. Cross-sectional survey of students' eating, physical activity and sedentary behaviours using validated instruments administered via an online questionnaire. Australian secondary schools across all states/territories. Secondary-school students aged 12-17 years participating in the 2009-10 National Secondary Students' Diet and Activity (NaSSDA) survey (n 12 188). Approximately one in five students (21 %) reported consuming unhealthy snack foods ≥14 times/week ('frequent snackers'). After adjusting for all covariates, older students and those with a BMI of ≥25 kg/m² were less likely to be frequent snackers, while students who reported high fast-food and high sugar-sweetened beverage consumption and those who watched television for >2 h/d were more likely to snack frequently. Furthermore, after adjusting for all covariates and demographic factors, students who agreed that snack foods are usually available at home, convenient to buy and that they eat too many snack foods were more likely to be snacking frequently. Conversely, students who agreed that fruit is a convenient snack were less likely to be frequent snackers. Frequent unhealthy snack-food consumption appears to cluster with other poor health behaviours. Perceptions of availability and convenience are factors most readily amenable to change, and findings suggest interventions should focus on decreasing the availability of unhealthy snack foods in the home and promoting healthier options such as fruit as convenient snacks.

Off-premise alcohol outlet characteristics and violence.

PubMed

Snowden, Aleksandra J; Pridemore, William Alex

2014-07-01

There is considerable evidence of an association between alcohol outlet density and violence. Although prior research reveals the importance of specific characteristics of bars on this association and that the relationship between bar density and violence may be moderated by these characteristics, there are few similar studies of the characteristics of off-premise outlets (e.g., liquor and convenience stores). We examined whether immediate environment, business practice, staff, and patron characteristics of off-premise alcohol outlets are associated with simple and aggravated assault density. Cross-sectional design using aggregate data from 65 census block groups in a non-metropolitan college town, systematic social observation, and spatial modeling techniques. We found limited effects of immediate environment, business practice, staff, and patron characteristics on simple assault density and no effect on aggravated assault density. Only two out of 17 characteristics were associated with simple assault density (i.e., nearby library and male patrons). This is the first study to examine the association between several off-premise alcohol outlet characteristics and assault. Our findings suggest that where the off-premise outlets are located, how well the immediate environment is maintained, what types of beverages the outlets sell, who visits them, and who works there matter little in their association with violence. This suggests the importance of outlet density itself as a primary driver of any association with violence. Public policies aimed at reducing alcohol outlet density or clustering may be useful for reducing violence.

Composition driven monolayer to bilayer transformation in a surfactant intercalated Mg-Al layered double hydroxide.

PubMed

Naik, Vikrant V; Chalasani, Rajesh; Vasudevan, S

2011-03-15

The structure and organization of dodecyl sulfate (DDS) surfactant chains intercalated in an Mg-Al layered double hydroxide (LDH), Mg(1-x)Alx(OH)2, with differing Al/Mg ratios has been investigated. The Mg-Al LDHs can be prepared over a range of compositions with x varying from 0.167 to 0.37 and therefore provides a simple system to study how the organization of the alkyl chains of the intercalated DDS anions change with packing density; the Al/Mg ratio or x providing a convenient handle to do so. Powder X-ray diffraction measurements showed that at high packing densities (x ≥ 0.3) the alkyl chains of the intercalated dodecyl sulfate ions are anchored on opposing LDH sheets and arranged as bilayers with an interlayer spacing of ∼27 Å. At lower packing densities (x < 0.2) the surfactant chains form a monolayer with the alkyl chains oriented flat in the galleries with an interlayer spacing of ∼8 Å. For the in between compositions, 0.2 ≤ x < 0.3, the material is biphasic. MD simulations were performed to understand how the anchoring density of the intercalated surfactant chains in the Mg-Al LDH-DDS affects the organization of the chains and the interlayer spacing. The simulations are able to reproduce the composition driven monolayer to bilayer transformation in the arrangement of the intercalated surfactant chains and in addition provide insights into the factors that decide the arrangement of the surfactant chains in the two situations. In the bilayer arrangement, it is the dispersive van der Waals interactions between chains in opposing layers of the anchored bilayer that is responsible for the cohesive energy of the solid whereas at lower packing densities, where a monolayer arrangement is favored, Coulomb interactions between the positively charged Mg-Al LDH sheets and the negatively charged headgroup of the DDS anion dominate.

Association of Lipid Accumulation Product with Cardio-Metabolic Risk Factors in Postmenopausal Women.

PubMed

Namazi Shabestari, Alireza; Asadi, Mojgan; Jouyandeh, Zahra; Qorbani, Mostafa; Kelishadi, Roya

2016-06-01

The lipid accumulation product is a novel, safe and inexpensive index of central lipid over accumulation based on waist circumference and fasting concentration of circulating triglycerides. This study was designed to investigate the ability of lipid accumulation product to predict Cardio-metabolic risk factors in postmenopausal women. In this Cross-sectional study, 264 postmenopausal women by using convenience sampling method were selected from menopause clinic in Tehran. Cardio-metabolic risk factors were measured, and lipid accumulation product (waist-58×triglycerides [nmol/L]) was calculated. Optimal cut-off point of lipid accumulation product for predicting metabolic syndrome was estimated by ROC (Receiver-operating characteristic) curve analysis. Metabolic syndrome was diagnosed in 41.2% of subjects. Optimal cut-off point of lipid accumulation product for predicting metabolic syndrome was 47.63 (sensitivity:75%; specificity:77.9%). High lipid accumulation product increases risk of all Cardio-metabolic risk factors except overweight, high Total Cholesterol, high Low Density Lipoprotein Cholesterol and high Fasting Blood Sugar in postmenopausal women. Our findings show that lipid accumulation product is associated with metabolic syndrome and some Cardio-metabolic risk factors Also lipid accumulation product may have been a useful tool for predicting cardiovascular disease and metabolic syndrome risk in postmenopausal women.

Disparities in the food environment surrounding US middle and high schools

PubMed Central

Sturm, Roland

2010-01-01

Summary Background Disparities in the type and density of food retail outlets have been hypothesized as a possible cause of differential obesity rates across racial/ethnic and income groups. Several local studies have documented differences in business environments by sociodemographic neighbourhood characteristics, but no data specific for youth have been published. This study analyses the food environment surrounding all public middle and high schools in the USA. Methods Buffers were calculated with a radius of 400 and 800 m from the main entrance of public secondary schools in the USA (n = 31,622), and business establishments within those buffers were identified using InfoUSA proprietary business listings. Indicators of any convenience store, limited-service restaurant, snack store or off-licences/liquor store and counts of businesses were regressed on the proportion of students eligible for free school meals, Title I eligibility of the school, racial/ethnic composition, location and student/teacher ratio. Results Hispanic youth are particularly likely to attend schools that are surrounded by convenience stores, restaurants, snack stores or off-licences. This effect is independent and in addition to poverty (i.e. students eligible for free school meals or schools that are Title I eligible) or location (urban core, suburban, town, rural). The association between other racial groups and nearby businesses is weaker, with the exception of off-licences, where a higher proportion of minority groups increases the probability of off-licences in close proximity to the school. Middle schools have fewer surrounding businesses than high schools, and larger schools have fewer surrounding businesses than smaller schools. Conclusions Easy availability of snacks, sodas and fast food in the immediate vicinity of a school could easily negate school food policies, especially among students who can leave campus. Surrounding food outlets could also lower the effectiveness of health education in the classroom by setting a highly visible example that counters educational messages. There are several clear differences across sociodemographic groups with, arguably, the most pernicious being the location of off-licences. These disparities may represent an important type of environmental injustice for minorities and lower-income youth, with potential adverse consequences for dietary behaviours. PMID:18207475

Raman Spectral Signatures as Conformational Probes of Biomolecules

NASA Astrophysics Data System (ADS)

Golan, Amir; Mayorkas, Nitzan; Rosenwaks, Salman; Bar, Ilana

2009-06-01

A first application of ionization-loss stimulated Raman spectroscopy (ILSRS) for monitoring the spectral features of four conformers of a gas phase neurotransmitter (2-phenylethylamine) is reported. The Raman spectra of the conformers show bands that uniquely identify the conformational structure of the molecule and are well matched by density functional theory calculations. The measurement of spectral signatures by ILSRS in an extended spectral range, with a relatively convenient laser source, is extremely important, allowing enhanced accessibility to intra- and inter-molecular forces, which are significant in biological structure and activity.

Raman Spectral Signatures as Conformational Probes of Biomolecules

NASA Astrophysics Data System (ADS)

Bar, Ilana; Golan, Amir; Mayorkas, Nitzan; Rosenwaks, Salman

2009-03-01

A first application of ionization-loss stimulated Raman spectroscopy (ILSRS) monitoring the spectral features of four conformers of a gas phase neurotransmitter (2-phenylethylamine) is reported. The Raman spectra of the conformers show bands that uniquely identify the conformational structure of the molecule and are well matched by density functional theory calculations. The measurement of spectral signatures by ILSRS in an extended spectral range, with a relatively convenient laser source, is extremely important, allowing enhanced accessibility to intra- and inter-molecular forces, which are significant in biological structure and activity.

Pressure Effects on the Relaxation of an Excited Nitromethane Molecule in an Argon Bath

DTIC Science & Technology

2015-01-05

pressure. The Schwarzer et al. measurements of the relaxation of azulene in a variety of supercritical fluids including CO2 show that a change in...J. Chem. Phys. 142, 014303 (2015) experimental studies8(b),8(c),14,15 that have used supercritical fluids for which the density can be conveniently...work of Heidelbach et al.20 for azulene/ CO2 and of Paul et al.23 for the C6F6/N2 system. While it is impossible to briefly summarize the vast body of

The production and escape of nitrogen atoms on Mars

NASA Technical Reports Server (NTRS)

Fox, J. L.

1992-01-01

The lack of agreement between our previously computed values and those measured by Viking of the N-15:N-14 isotope enhancement ratio has led us to reevaluate our model of the Martian ionosphere. In previous models, we were unable to reproduce the ion profiles measured by the RPA on Viking using electron temperatures that were higher that the ion temperatures. When we increased the electron temperatures to 2500-3000 K and with a zero flux upper boundary condition, the ion densities at high altitudes exceeded the measured values by a large factor. We found that we can better fit the observed profiles if we impose a loss process at the upper boundary of our model. If the horizontal fluxes of ions do not constitute a net loss of ions, then the escape of N due to dissociative recombination is also inhibited and better agreement with the measured isotope ratio is found. The production of escaping nitrogen atoms is closely related to the production of thermospheric odd nitrogen; therefore, the densities of NO measured by Viking provide a convenient check on our nitrogen escape model. Our standard model NO densities are less that the measured values by a factor of 2-3, as are those of previous models. We find that reasonable agreement can be obtained by assuming that the rate coefficient for loss of odd nitrogen in the reaction of N with NO is smaller at temperatures that prevail in the lower Martian thermosphere than the standard value, which applies to temperatures of 200-400 K. Other aspects of this investigation are presented.

Evaluating The Risk Of Osteoporosis Through Bone Mass Density.

PubMed

Sayed, Sayeeda Amber; Khaliq, Asif; Mahmood, Ashar

2016-01-01

Osteoporosis is a bone disorder, characterized by loss of bone mass density. Osteoporosis affects more than 30% of post-menopausal women. Osteoporosis is often associated with restricted body movement, pain and joint deformities. Early identification and early intervention can help in reducing these complications. The primary objective of this study was to estimate the burden of Osteoporosis in Urban setting of Sindh among women of different age groups and to access the effect of different protective measures that can reduce the risk of Osteoporosis. In this study, 500 women's of 3 major cities of Sindh were approached by non-probability convenience sampling technique. Women bearing age 20 years or more were included. Women who fall under inclusion criteria were screened for BMD (Bone mineral density) test and were classified as Healthy, Osteopenic and Osteoporotic based on their T-score. The association of different protective measures and risk of osteoporosis was assessed by prevalence relative risk (PRR). The result of this study indicate that the burden of Osteoporosis is very high among the women of Sindh, only 17.4% (84) women were found to have normal BMD score. The life style of majority of women was sedentary. The PRR calculated for Exposure to sunlight, regular exercise, and use of nutritional supplement was 12.5, 5.19 and 2.72 folds respectively. The results of study reveal that exposure to sunlight, regular physical exercise and use of nutritional supplements found to be effective in reducing the risk of osteoporosis among women of all age group. Health education and promotion toward osteoporosis prevention can significantly contribute in reducing the morbidity of osteoporosis.

Atomic quantum corrals for Bose-Einstein condensates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiong Hongwei; Kavli Institute for Theoretical Physics China, Chinese Academy of Sciences, Beijing 100190; Wu Biao

2010-11-15

We consider the dynamics of Bose-Einstein condensates in a corral-like potential. Compared to the electronic quantum corrals, the atomic quantum corrals have the advantages of allowing direct and convenient observation of the wave dynamics, together with adjustable interaction strength. Our numerical study shows that these advantages not only allow exploration of the rich dynamical structures in the density distribution but also make the corrals useful in many other aspects. In particular, the corrals for atoms can be arranged into a stadium shape for the experimental visualization of quantum chaos, which has been elusive with electronic quantum corrals. The density correlationmore » is used to describe quantitatively the dynamical quantum chaos. Furthermore, we find that the interatomic interaction can greatly enhance the dynamical quantum chaos, for example, inducing a chaotic behavior even in circle-shaped corrals.« less

Space-Pseudo-Time Method: Application to the One-Dimensional Coulomb Potential and Density Funtional Theory

NASA Astrophysics Data System (ADS)

Weatherford, Charles; Gebremedhin, Daniel

2016-03-01

A new and efficient way of evolving a solution to an ordinary differential equation is presented. A finite element method is used where we expand in a convenient local basis set of functions that enforce both function and first derivative continuity across the boundaries of each element. We also implement an adaptive step size choice for each element that is based on a Taylor series expansion. The method is applied to solve for the eigenpairs of the one-dimensional soft-coulomb potential and the hard-coulomb limit is studied. The method is then used to calculate a numerical solution of the Kohn-Sham differential equation within the local density approximation is presented and is applied to the helium atom. Supported by the National Nuclear Security Agency, the Nuclear Regulatory Commission, and the Defense Threat Reduction Agency.

Biotechnology

NASA Image and Video Library

2003-05-05

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, a TCM is shown after mixing protocols, and bubbles of various sizes can be seen.

Biotechnology

NASA Image and Video Library

2003-05-05

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, beads are trapped in the injection port, with bubbles forming shortly after injection.

Entropy and density of states from isoenergetic nonequilibrium processes

NASA Astrophysics Data System (ADS)

Adib, Artur B.

2005-05-01

Two identities in statistical mechanics involving entropy differences (or ratios of densities of states) at constant energy are derived. The first provides a nontrivial extension of the Jarzynski equality to the microcanonical ensemble [C. Jarzynski, Phys. Rev. Lett. 78, 2690 (1997)], which can be seen as a “fast-switching” version of the adiabatic switching method for computing entropies [M. Watanabe and W. P. Reinhardt, Phys. Rev. Lett. 65, 3301 (1990)]. The second is a thermodynamic integration formula analogous to a well-known expression for free energies, and follows after taking the quasistatic limit of the first. Both identities can be conveniently used in conjunction with a scaling relation (herein derived) that allows one to extrapolate measurements taken at a single energy to a wide range of energy values. Practical aspects of these identities in the context of numerical simulations are discussed.

Combined Modeling of Acceleration, Transport, and Hydrodynamic Response in Solar Flares. 1; The Numerical Model

NASA Technical Reports Server (NTRS)

Liu, Wei; Petrosian, Vahe; Mariska, John T.

2009-01-01

Acceleration and transport of high-energy particles and fluid dynamics of atmospheric plasma are interrelated aspects of solar flares, but for convenience and simplicity they were artificially separated in the past. We present here self consistently combined Fokker-Planck modeling of particles and hydrodynamic simulation of flare plasma. Energetic electrons are modeled with the Stanford unified code of acceleration, transport, and radiation, while plasma is modeled with the Naval Research Laboratory flux tube code. We calculated the collisional heating rate directly from the particle transport code, which is more accurate than those in previous studies based on approximate analytical solutions. We repeated the simulation of Mariska et al. with an injection of power law, downward-beamed electrons using the new heating rate. For this case, a -10% difference was found from their old result. We also used a more realistic spectrum of injected electrons provided by the stochastic acceleration model, which has a smooth transition from a quasi-thermal background at low energies to a non thermal tail at high energies. The inclusion of low-energy electrons results in relatively more heating in the corona (versus chromosphere) and thus a larger downward heat conduction flux. The interplay of electron heating, conduction, and radiative loss leads to stronger chromospheric evaporation than obtained in previous studies, which had a deficit in low-energy electrons due to an arbitrarily assumed low-energy cutoff. The energy and spatial distributions of energetic electrons and bremsstrahlung photons bear signatures of the changing density distribution caused by chromospheric evaporation. In particular, the density jump at the evaporation front gives rise to enhanced emission, which, in principle, can be imaged by X-ray telescopes. This model can be applied to investigate a variety of high-energy processes in solar, space, and astrophysical plasmas.

General and highly α-regioselective zinc-mediated prenylation of aldehydes and ketones.

PubMed

Zhao, Li-Ming; Jin, Hai-Shan; Wan, Li-Jing; Zhang, Li-Ming

2011-03-18

A simple, efficient, and general α-prenylation approach for the synthesis of a variety of α-prenylated alcohols has been successfully developed. A wide range of α-prenylated alcohol derivatives could be obtained in good yields by highly α-regioselective zinc-mediated prenylation of various aldehydes and ketones with prenyl bromide at 120 °C in HMPA. By simply altering the reaciton solvent and temperature, the method allows the achievement of a highly notable opposite regiocontrol, providing the expected regiochemical product. The method provides a convenient route for the direct α-prenylation of carbonyl compounds in a highly α-regioselective manner using a cheap and convenient mediator. Two possible pathways are proposed to account for the formation of these synthetically difficult-to-obtain molecules.

Adsorption properties of AlN on Si(111) surface: A density functional study

NASA Astrophysics Data System (ADS)

Yuan, Yinmei; Zuo, Ran; Mao, Keke; Tang, Binlong; Zhang, Zhou; Liu, Jun; Zhong, Tingting

2018-04-01

In the process of preparing GaN on Si substrate by MOCVD, an AlN buffer layer is very important. In this study, we conducted density functional theory calculations on the adsorption of AlN molecule on Si(111)-(2 × 2) surface, with the AlN molecule located horizontally or vertically above Si(111) surface at different adsorption sites. The calculations revealed that the lowest adsorption energy was at the N-top-Al-bridge site in the horizontal configuration, with the narrowest band gap, indicating that it was the most preferential adsorption growth status of AlN. In the vertical configurations, N adatom was more reactive and convenient to form bonds with the topmost Si atoms than Al adatom. When the N-end of the AlN molecule was located downward, the hollow site was the preferred adsorption site; when the Al-end was located downward, the bridge site was the most energetically favorable. Moreover, we investigated some electronic properties such as partial density of states, electron density difference, Mulliken populations, etc., revealing the microscale mechanism for AlN adsorption on Si(111) surface and providing theoretical support for adjusting the processing parameters during AlN or GaN production.

Effects of Acids, Bases, and Heteroatoms on Proximal Radial Distribution Functions for Proteins

PubMed Central

Nguyen, Bao Linh; Pettitt, B. Montgomery

2015-01-01

The proximal distribution of water around proteins is a convenient method of quantifying solvation. We consider the effect of charged and sulfur-containing amino acid side-chain atoms on the proximal radial distribution function (pRDF) of water molecules around proteins using side-chain analogs. The pRDF represents the relative probability of finding any solvent molecule at a distance from the closest or surface perpendicular protein atom. We consider the near-neighbor distribution. Previously, pRDFs were shown to be universal descriptors of the water molecules around C, N, and O atom types across hundreds of globular proteins. Using averaged pRDFs, a solvent density around any globular protein can be reconstructed with controllable relative error. Solvent reconstruction using the additional information from charged amino acid side-chain atom types from both small models and protein averages reveals the effects of surface charge distribution on solvent density and improves the reconstruction errors relative to simulation. Solvent density reconstructions from the small-molecule models are as effective and less computationally demanding than reconstructions from full macromolecular models in reproducing preferred hydration sites and solvent density fluctuations. PMID:26388706

Vacuum packing: a model system for laboratory-scale silage fermentations.

PubMed

Johnson, H E; Merry, R J; Davies, D R; Kell, D B; Theodorou, M K; Griffith, G W

2005-01-01

To determine the utility of vacuum-packed polythene bags as a convenient, flexible and cost-effective alternative to fixed volume glass vessels for lab-scale silage studies. Using perennial ryegrass or red clover forage, similar fermentations (as assessed by pH measurement) occurred in glass tube and vacuum-packed silos over a 35-day period. As vacuum-packing devices allow modification of initial packing density, the effect of four different settings (initial packing densities of 0.397, 0.435, 0.492 and 0.534 g cm(-3)) on the silage fermentation over 16 days was examined. Significant differences in pH decline and lactate accumulation were observed at different vacuum settings. Gas accumulation was apparent within all bags and changes in bag volume with time was observed to vary according to initial packing density. Vacuum-packed silos do provide a realistic model system for lab-scale silage fermentations. Use of vacuum-packed silos holds potential for lab-scale evaluations of silage fermentations, allowing higher throughput of samples, more consistent packing as well as the possibility of investigating the effects of different initial packing densities and use of different wrapping materials.

Fragmentation network of doubly charged methionine: Interpretation using graph theory

NASA Astrophysics Data System (ADS)

Ha, D. T.; Yamazaki, K.; Wang, Y.; Alcamí, M.; Maeda, S.; Kono, H.; Martín, F.; Kukk, E.

2016-09-01

The fragmentation of doubly charged gas-phase methionine (HO2CCH(NH2)CH2CH2SCH3) is systematically studied using the self-consistent charge density functional tight-binding molecular dynamics (MD) simulation method. We applied graph theory to analyze the large number of the calculated MD trajectories, which appears to be a highly effective and convenient means of extracting versatile information from the large data. The present theoretical results strongly concur with the earlier studied experimental ones. Essentially, the dication dissociates into acidic group CO2H and basic group C4NSH10. The former may carry a single or no charge and stays intact in most cases, whereas the latter may hold either a single or a double charge and tends to dissociate into smaller fragments. The decay of the basic group is observed to follow the Arrhenius law. The dissociation pathways to CO2H and C4NSH10 and subsequent fragmentations are also supported by ab initio calculations.

A Green Urban Mobility System Solution from the EU Ingrid project

NASA Astrophysics Data System (ADS)

D'Errico, Fabrizio; Screnci, Adamo; Romeo, Marco

With a mandate to reach 20/20/20 targets, new strategies are now focusing on the increased use of electricity to power transportation. Particularly in major urban areas of the EU, capillary use of electric vehicles are being encouraged, however, as these vehicles will be powered by the grid, there is always the risk that load peaks will occur. This work is just one of several being developed as part of the 23.9 MLN Euros INGRID European project started in July 2012, which combines solid-state high-density hydrogen storage systems with advanced ICT technologies for distribution grids. One possible solution which has been designed, is an off-grid utility to store renewable electricity captured from wind/solar sources and a re-charging point for full battery electric cars. This work shows the preliminary financial assessment of two business models for the Park-for-Recharging concept to promote green e-mobility as a more convenient and economical means of by-car transport.

Experimental investigation on gaseous emissions from the combustion of date palm residues in laboratory scale furnace.

PubMed

El may, Yassine; Jeguirim, Mejdi; Dorge, Sophie; Trouvé, Gwenaelle; Said, Rachid

2013-03-01

Emissions characteristics from the combustion of five date palm residues, DPR, (Date Palm Leaflets, Date Palm Rachis, Date Palm Trunk, Date Stones and fruitstalk prunings) in a laboratory scale furnace were investigated. Release of gaseous products such as CO2, CO, VOC, NOx and SO2 were measured at 600-800°C. The main goal was to analyze thermal behaviors and gaseous emissions in order to select the most convenient biofuel for an application in domestic boiler installations. Regards to biofuel characteristics, date stone have the highest energy density (11.4GJ/m(3)) and the lowest ash content (close to 1.2%). Combustion tests show that among the tested date palm residues, date stone may be the promising biofuel for the design of combustion processing system. However, a special attention to the design of the secondary air supply should be given to prevent high emissions of CO and volatile matters. Copyright © 2012 Elsevier Ltd. All rights reserved.

On the Scaling Laws for Jet Noise in Subsonic and Supersonic Flow

NASA Technical Reports Server (NTRS)

Vu, Bruce; Kandula, Max

2003-01-01

The scaling laws for the simulation of noise from subsonic and ideally expanded supersonic jets are examined with regard to their applicability to deduce full scale conditions from small-scale model testing. Important parameters of scale model testing for the simulation of jet noise are identified, and the methods of estimating full-scale noise levels from simulated scale model data are addressed. The limitations of cold-jet data in estimating high-temperature supersonic jet noise levels are discussed. It is shown that the jet Mach number (jet exit velocity/sound speed at jet exit) is a more general and convenient parameter for noise scaling purposes than the ratio of jet exit velocity to ambient speed of sound. A similarity spectrum is also proposed, which accounts for jet Mach number, angle to the jet axis, and jet density ratio. The proposed spectrum reduces nearly to the well-known similarity spectra proposed by Tam for the large-scale and the fine-scale turbulence noise in the appropriate limit.

A simple combined floating and anchored collagen gel for enhancing mechanical strength of culture system.

PubMed

Harada, Ichiro; Kim, Sung-Gon; Cho, Chong Su; Kurosawa, Hisashi; Akaike, Toshihiro

2007-01-01

In this study, a simple combined method consisting of floating and anchored collagen gel in a ligament or tendon equivalent culture system was used to produce the oriented fibrils in fibroblast-populated collagen matrices (FPCMs) during the remodeling and contraction of the collagen gel. Orientation of the collagen fibrils along single axis occurred over the whole area of the floating section and most of the fibroblasts were elongated and aligned along the oriented collagen fibrils, whereas no significant orientation of fibrils was observed in normally contracted FPCMs by the floating method. Higher elasticity and enhanced mechanical strength were obtained using our simple method compared with normally contracted floating FPCMs. The Young's modulus and the breaking point of the FPCMs were dependent on the initial cell densities. This simple method will be applied as a convenient bioreactor to study cellular processes of the fibroblasts in the tissues with highly oriented fibrils such as ligaments or tendons. (c) 2006 Wiley Periodicals, Inc.

Underground Study of Big Bang Nucleosynthesis in the Precision Era of Cosmology

NASA Astrophysics Data System (ADS)

Gustavino, Carlo

2017-03-01

Big Bang Nucleosinthesis (BBN) theory provides definite predictions for the abundance of light elements produced in the early universe, as far as the knowledge of the relevant nuclear processes of the BBN chain is accurate. At BBN energies (30 ≲ Ecm ≲ 300 MeV) the cross section of many BBN processes is very low because of the Coulomb repulsion between the interacting nuclei. For this reason it is convenient to perform the measurements deep underground. Presently the world's only facility operating underground is LUNA (Laboratory for Undergound Nuclear astrophysics) at LNGS ("Laboratorio Nazionale del Gran Sasso", Italy). In this presentation the BBN measurements of LUNA are briefly reviewed and discussed. It will be shown that the ongoing study of the D(p, γ)3He reaction is of primary importance to derive the baryon density of universe Ωb with high accuracy. Moreover, this study allows to constrain the existence of the so called "dark radiation", composed by undiscovered relativistic species permeating the universe, such as sterile neutrinos.

Use of Computed Tomography for Characterizing Materials Grown Terrestrially and in Microgravity

NASA Technical Reports Server (NTRS)

Gillies, Donald C.; Engel, H. P.

2001-01-01

The purpose behind this work is to provide NASA Principal Investigators (PIs) rapid information, nondestructively, about their samples. This information will be in the form of density values throughout the samples, especially within slices 1 mm high. With correct interpretation and good calibration, these values will enable the PI to obtain macro chemical compositional analysis for his/her samples. Alternatively, the technique will provide information about the porosity level and its distribution within the sample. Experience gained with a NASA Microgravity Research Division-sponsored Advanced Technology Development (ATD) project on this topic has brought the technique to a level of maturity at which it has become a viable characterization tool for many of the Materials Science Pls, but with equipment that could never be supported within their own facilities. The existing computed tomography (CT) facility at NASA's Kennedy Space Center (KSC) is ideally situated to furnish information rapidly and conveniently to PIs, particularly immediately before and after flight missions.

Use of Computed Tomography for Characterizing Materials Grown Terrestrially and in Microgravity

NASA Technical Reports Server (NTRS)

Gillies, Donald C.; Engel, H. P.

2000-01-01

The purpose behind this work is to provide NASA Principal Investigators (PI) rapid information, non-destructively, about their samples. This information will be in the form of density values throughout the samples, especially within slices 1 mm high. With correct interpretation and good calibration, these values will enable the PI to obtain macro chemical compositional analysis for his/her samples. Alternatively, the technique will provide information about the porosity level and its distribution within the sample. Experience gained with a NASA MRD-sponsored Advanced Technology Development (ATD) project on this topic has brought the technique to a level of maturity at which it has become a viable characterization tool for many of the Materials Science PIs, but with equipment that could never be supported within their own facilities. The existing computed tomography (CT) facility at NASA's Kennedy Space Center (KSC) is ideally situated to furnish information rapidly and conveniently to PIs, particularly immediately before and after flight missions.

Raman vibrational spectra of bulk to monolayer Re S 2 with lower symmetry

DOE PAGES

Feng, Yanqing; Zhou, Wei; Wang, Yaojia; ...

2015-08-26

Lattice structure and symmetry of two-dimensional (2D) layered materials are of key importance to their fundamental mechanical, thermal, electronic and optical properties. Raman spectroscopy, as a convenient and nondestructive tool, however has its limitations on identifying all symmetry allowing Raman modes and determining the corresponding crystal structure of 2D layered materials with high symmetry like graphene and MoS 2. Due to lower structural symmetry and extraordinary weak interlayer coupling of ReS 2, we successfully identified all 18 first-order Raman active modes for bulk and monolayer ReS 2. Without van der Waals (vdW) correction, our local density approximation (LDA) calculations successfullymore » reproduce all the Raman modes. Our calculations also suggest no surface reconstruction effect and the absence of low frequency rigid-layer Raman modes below 100 cm -1. As a result, combining with Raman and LDA thus provides a general approach for studying the vibrational and structural properties of 2D layered materials with lower symmetry.« less

Fitting Multimeric Protein Complexes into Electron Microscopy Maps Using 3D Zernike Descriptors

PubMed Central

Esquivel-Rodríguez, Juan; Kihara, Daisuke

2012-01-01

A novel computational method for fitting high-resolution structures of multiple proteins into a cryoelectron microscopy map is presented. The method named EMLZerD generates a pool of candidate multiple protein docking conformations of component proteins, which are later compared with a provided electron microscopy (EM) density map to select the ones that fit well into the EM map. The comparison of docking conformations and the EM map is performed using the 3D Zernike descriptor (3DZD), a mathematical series expansion of three-dimensional functions. The 3DZD provides a unified representation of the surface shape of multimeric protein complex models and EM maps, which allows a convenient, fast quantitative comparison of the three dimensional structural data. Out of 19 multimeric complexes tested, near native complex structures with a root mean square deviation of less than 2.5 Å were obtained for 14 cases while medium range resolution structures with correct topology were computed for the additional 5 cases. PMID:22417139

Fitting multimeric protein complexes into electron microscopy maps using 3D Zernike descriptors.

PubMed

Esquivel-Rodríguez, Juan; Kihara, Daisuke

2012-06-14

A novel computational method for fitting high-resolution structures of multiple proteins into a cryoelectron microscopy map is presented. The method named EMLZerD generates a pool of candidate multiple protein docking conformations of component proteins, which are later compared with a provided electron microscopy (EM) density map to select the ones that fit well into the EM map. The comparison of docking conformations and the EM map is performed using the 3D Zernike descriptor (3DZD), a mathematical series expansion of three-dimensional functions. The 3DZD provides a unified representation of the surface shape of multimeric protein complex models and EM maps, which allows a convenient, fast quantitative comparison of the three-dimensional structural data. Out of 19 multimeric complexes tested, near native complex structures with a root-mean-square deviation of less than 2.5 Å were obtained for 14 cases while medium range resolution structures with correct topology were computed for the additional 5 cases.

Lead-free/rare earth-free Green-light-emitting crystal based on organic-inorganic hybrid [(C10H16N)2][MnBr4] with high emissive quantum yields and large crystal size

NASA Astrophysics Data System (ADS)

Cai, Xing-Wei; Zhao, Yu-Yuan; Li, Hong; Huang, Cui-Ping; Zhou, Zhen

2018-06-01

With the flourishing development of emitting materials, tremendous technological progress has been accomplished. However, they still face great challenges in convenient economical environmental-friendly large-scale commercial production. Herein we designed this organic-inorganic hybrid lead-free compound, an emerging class of high-efficiency emitting materials, [(C10H16N)2][MnBr4] (1), which emits intense greenish photoluminescence with a high emissive quantum yields of 72.26%, was prepared through the convenient economical solution method. What's more, compared with rare earth fluorescent materials (especially green-emitting Tb), Mn material is rich in natural resources and low commercial cost, which would possess an increasingly predominant advantage in the preparation of luminescent materials. Additionally, the exceptional thermal stability as well as the low-cost/convenient preparation process makes crystal 1 with the large size of more than 1 cm to be an ideal technologically important green-emitting material and it would open up a new route towards the commercialization process of lead-free/rare earth-free hybrid emitting materials in display and sensing.

CT analysis of lung density changes in patients undergoing total body irradiation prior to bone marrow transplantation.

PubMed

Lee, J Y; Shank, B; Bonfiglio, P; Reid, A

1984-10-01

Sequential changes in lung density measured by CT are potentially sensitive and convenient monitors of lung abnormalities following total body irradiation (TBI). Methods have been developed to compare pre- and post-TBI CT of lung. The average local features of a cross-sectional lung slice are extracted from three peripheral regions of interest in the anterior, posterior, and lateral portions of the CT image. Also, density profiles across a specific region may be obtained. These may be compared first for verification of patient position and breathing status and then for changes between pre- and post-TBI. These may also be compared with radiation dose profiles through the lung. A preliminary study on 21 leukemia patients undergoing total body irradiation indicates the following: (a) Density gradients of patients' lungs in the antero-posterior direction show a marked heterogeneity before and after transplantation compared with normal lungs. The patients with departures from normal density gradients pre-TBI correlate with later pulmonary complications. (b) Measurements of average peripheral lung densities have demonstrated that the average lung density in the younger age group is substantially higher: pre-TBI, the average CT number (1,000 scale) is -638 +/- 39 Hounsfield unit (HU) for 0-10 years old and -739 +/- 53 HU for 21-40 years old. (c) Density profiles showed no post-TBI regional changes in lung density corresponding to the dose profile across the lung, so no differentiation of a radiation-specific effect has yet been possible. Computed tomographic density profiles in the antero-posterior direction are successfully used to verify positioning of the CT slice and the breathing level of the lung.

The electrochemical generation of useful chemical species from lunar materials

NASA Technical Reports Server (NTRS)

Tsai, Kan J.; Kuchynka, Daniel J.; Sammells, Anthony F.

1989-01-01

The current status of work on an electrochemical technology for the simultaneous generation of oxygen and lithium from a Li2O containing molten salt (Li2O-LiCl-LiF) is discussed. The electrochemical cell utilizes an oxygen vacancy conducting solid electrolyte, yttria-stabilized zirconia, to effect separation between the oxygen evolving and lithium reduction half-cell reactions. The cell, which operates at 700 to 800 C, possesses rapid electrode kinetics at the lithium-alloy electrode with exchange current density values being greater than 60 mA/sq cm, showing high reversibility for this reaction. When used in the electrolytic mode, lithium produced at the negative electrode would be continuously removed from the cell for later use (under lunar conditions) as an easily storable reducting agent (compared to H2) for the chemical refining of lunar ores via the general reaction: 2Li + MO yields Li2O + M where MO represents a lunar ore. Emphasis to this time has been on the simulated lunar ore ilmenite (FeTiO3), which we have found becomes chemically reduced by Li at 432 C. Furthermore, both Fe2O3 and TiO2 have been reduced by Li to give the corresponding metal. This electrochemical approach provides a convenient route for producing metals under lunar conditions and oxygen for the continuous maintenance of human habitats on the Moon's surface. Because of the high reversibility of this electrochemical system, it has also formed the basis for the lithium-oxygen secondary battery. This secondary lithium-oxygen battery system posses the highest theoretical energy density yet investigated.

The electrochemical generation of useful chemical species from lunar materials

NASA Astrophysics Data System (ADS)

Tsai, Kan J.; Kuchynka, Daniel J.; Sammells, Anthony F.

1989-03-01

The current status of work on an electrochemical technology for the simultaneous generation of oxygen and lithium from a Li2O containing molten salt (Li2O-LiCl-LiF) is discussed. The electrochemical cell utilizes an oxygen vacancy conducting solid electrolyte, yttria-stabilized zirconia, to effect separation between the oxygen evolving and lithium reduction half-cell reactions. The cell, which operates at 700 to 800 C, possesses rapid electrode kinetics at the lithium-alloy electrode with exchange current density values being greater than 60 mA/sq cm, showing high reversibility for this reaction. When used in the electrolytic mode, lithium produced at the negative electrode would be continuously removed from the cell for later use (under lunar conditions) as an easily storable reducting agent (compared to H2) for the chemical refining of lunar ores via the general reaction: 2Li + MO yields Li2O + M where MO represents a lunar ore. Emphasis to this time has been on the simulated lunar ore ilmenite (FeTiO3), which we have found becomes chemically reduced by Li at 432 C. Furthermore, both Fe2O3 and TiO2 have been reduced by Li to give the corresponding metal. This electrochemical approach provides a convenient route for producing metals under lunar conditions and oxygen for the continuous maintenance of human habitats on the Moon's surface. Because of the high reversibility of this electrochemical system, it has also formed the basis for the lithium-oxygen secondary battery. This secondary lithium-oxygen battery system posses the highest theoretical energy density yet investigated.

More than Just Convenient: The Scientific Merits of Homogeneous Convenience Samples

PubMed Central

Jager, Justin; Putnick, Diane L.; Bornstein, Marc H.

2017-01-01

Despite their disadvantaged generalizability relative to probability samples, non-probability convenience samples are the standard within developmental science, and likely will remain so because probability samples are cost-prohibitive and most available probability samples are ill-suited to examine developmental questions. In lieu of focusing on how to eliminate or sharply reduce reliance on convenience samples within developmental science, here we propose how to augment their advantages when it comes to understanding population effects as well as subpopulation differences. Although all convenience samples have less clear generalizability than probability samples, we argue that homogeneous convenience samples have clearer generalizability relative to conventional convenience samples. Therefore, when researchers are limited to convenience samples, they should consider homogeneous convenience samples as a positive alternative to conventional or heterogeneous) convenience samples. We discuss future directions as well as potential obstacles to expanding the use of homogeneous convenience samples in developmental science. PMID:28475254

Individual stellar haloes of massive galaxies measured to 100 kpc at 0.3 < z < 0.5 using Hyper Suprime-Cam

NASA Astrophysics Data System (ADS)

Huang, Song; Leauthaud, Alexie; Greene, Jenny E.; Bundy, Kevin; Lin, Yen-Ting; Tanaka, Masayuki; Miyazaki, Satoshi; Komiyama, Yutaka

2018-04-01

Massive galaxies display extended light profiles that can reach several hundreds of kiloparsecs. We use data from the Hyper Suprime-Cam (HSC) survey that is simultaneously wide (˜100 deg2) and deep (>28.5 mag arcsec-2 in i band) to study the stellar haloes of a sample of ˜7000 massive galaxies at z ˜ 0.4. The depth of the HSC data enables us to measure surface mass density profiles to 100 kpc for individual galaxies without stacking. As in previous work, we find that more massive galaxies exhibit more extended outer profiles than smaller galaxies. When this extended light is not properly accounted for (because of shallow imaging and/or inadequate profile modelling), the derived stellar mass function can be significantly underestimated at the high-mass end. Across our sample, the ellipticity of outer light profile increases substantially with radius. We show for the first time that these ellipticity gradients steepen dramatically as a function of galaxy mass, but we detect no mass dependence in outer colour gradients. Our results support the two-phase formation scenario for massive galaxies in which outer envelopes are built up at a later time from a series of merging events. We provide surface mass density profiles in a convenient tabulated format to facilitate comparisons with predictions from numerical simulations of galaxy formation.

Submarine groundwater discharge and solute transport under a transgressive barrier island

NASA Astrophysics Data System (ADS)

Evans, Tyler B.; Wilson, Alicia M.

2017-04-01

Many recent investigations of groundwater dynamics in beaches employed groundwater models that assumed isotropic, numerically-convenient hydrogeological conditions. Real beaches exhibit local variability with respect to stratigraphy, sediment grain size and associated topographic profile, so that groundwater flow may diverge significantly from idealized models. We used a combination of hydrogeologic field methods and a variable-density, saturated-unsaturated, transient groundwater flow model to investigate SGD and solute transport under Cabretta Beach, a small transgressive barrier island seaward of Sapelo Island, Georgia. We found that the inclusion of real beach heterogeneity drove important deviations from predictions based on theoretical beaches. Cabretta Beach sustained a stronger upper saline plume than predicted due to the presence of a buried silty mud layer beneath the surface. Infiltration of seawater was greater for neap tides than for spring tides due to variations in beach slope. The strength of the upper saline plume was greatest during spring tides, contrary to recent model predictions. The position and width of the upper saline plume was highly dynamic through the lunar cycle. Our results suggest that field measurements of salinity gradients may be useful for estimating rates of tidally and density driven recirculation through the beach. Finally, our results indicate that several important biogeochemical cycles recently studied at Cabretta Beach were heavily influenced by groundwater flow and associated solute transport.

High-precision measurements of cementless acetabular components using model-based RSA: an experimental study.

PubMed

Baad-Hansen, Thomas; Kold, Søren; Kaptein, Bart L; Søballe, Kjeld

2007-08-01

In RSA, tantalum markers attached to metal-backed acetabular cups are often difficult to detect on stereo radiographs due to the high density of the metal shell. This results in occlusion of the prosthesis markers and may lead to inconclusive migration results. Within the last few years, new software systems have been developed to solve this problem. We compared the precision of 3 RSA systems in migration analysis of the acetabular component. A hemispherical and a non-hemispherical acetabular component were mounted in a phantom. Both acetabular components underwent migration analyses with 3 different RSA systems: conventional RSA using tantalum markers, an RSA system using a hemispherical cup algorithm, and a novel model-based RSA system. We found narrow confidence intervals, indicating high precision of the conventional marker system and model-based RSA with regard to migration and rotation. The confidence intervals of conventional RSA and model-based RSA were narrower than those of the hemispherical cup algorithm-based system regarding cup migration and rotation. The model-based RSA software combines the precision of the conventional RSA software with the convenience of the hemispherical cup algorithm-based system. Based on our findings, we believe that these new tools offer an improvement in the measurement of acetabular component migration.

Ancient Chemistry "Pharaoh's Snakes" for Efficient Fe-/N-Doped Carbon Electrocatalysts.

PubMed

Ren, Guangyuan; Gao, Liangliang; Teng, Chao; Li, Yunan; Yang, Hequn; Shui, Jianglan; Lu, Xianyong; Zhu, Ying; Dai, Liming

2018-04-04

The method of fabricating nonprecious metal electrocatalysts with high activity and durability through a facile and eco-friendly procedure is of great significance to the development of low-cost fuel cells and metal-air batteries. Herein, we present that an ancient chemical reaction of "Pharaoh's snakes" can be a fast and convenient technique to prepare Fe-/N-doped carbon (Fe/N-C) nanosheet/nanotube electrocatalysts with sugar, soda, melamine, and iron nitrate as precursors. The resultant Fe/N-C catalyst has a hierarchically porous structure, a large surface area, and uniformly distributed active sites. The catalyst shows high electrocatalytic activities toward both the oxygen reduction reaction with a half-wave potential of 0.90 V (vs reversible hydrogen electrode) better than that of Pt/C and the oxygen evolution reaction with an overpotential of 0.46 V at the current density of 10 mA cm -2 comparable to that of RuO 2 . The activity and stability of the catalyst are also evaluated in primary and rechargeable Zn-air batteries. In both conditions, three-dimensional Fe/N-C exhibited performances superior to Pt/C. Our work demonstrates a success of utilizing an ancient science to make a state-of-the-art electrocatalyst.

Recent Progress in Electronic Skin

PubMed Central

Wang, Xiandi; Dong, Lin; Zhang, Hanlu; Yu, Ruomeng; Wang, Zhong Lin

2015-01-01

The skin is the largest organ of the human body and can sense pressure, temperature, and other complex environmental stimuli or conditions. The mimicry of human skin's sensory ability via electronics is a topic of innovative research that could find broad applications in robotics, artificial intelligence, and human–machine interfaces, all of which promote the development of electronic skin (e‐skin). To imitate tactile sensing via e‐skins, flexible and stretchable pressure sensor arrays are constructed based on different transduction mechanisms and structural designs. These arrays can map pressure with high resolution and rapid response beyond that of human perception. Multi‐modal force sensing, temperature, and humidity detection, as well as self‐healing abilities are also exploited for multi‐functional e‐skins. Other recent progress in this field includes the integration with high‐density flexible circuits for signal processing, the combination with wireless technology for convenient sensing and energy/data transfer, and the development of self‐powered e‐skins. Future opportunities lie in the fabrication of highly intelligent e‐skins that can sense and respond to variations in the external environment. The rapidly increasing innovations in this area will be important to the scientific community and to the future of human life. PMID:27980911

Highly selective and sensitive turn-on fluorescent sensor for detection of Al3+ based on quinoline-base Schiff base.

PubMed

Wang, Yang; Ma, Zhong-Ying; Zhang, De-Long; Deng, Jia-Li; Chen, Xiong; Xie, Cheng-Zhi; Qiao, Xin; Li, Qing-Zhong; Xu, Jing-Yuan

2018-04-15

A new aluminum ion fluorescent probe (4-(diethylamino)-2-hydroxybenzylidene)isoquinoline-1-carbohydrazide (HL 1 ) has been conveniently synthesized and characterized. HL 1 exhibited a highly selective and pronounced enhancement for Al 3+ in the fluorescence emission over other common cations by forming a 2:1 complex, with a recognition mechanism based on excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT). The strong fluorescent emission can be observed even at ppm level concentration of the probe in the presence of Al 3+ with 41 fold intensity enhancement at 545 nm. HL 1 displays good linear relationship with Al 3+ in the low concentration and the limit of detection is 8.08 × 10 -8  mol/L. Similar molecules with different substituents on salicylaldehyde phenyl ring were synthesized for studying the structure-activity relationship. Density-functional theory (DFT) calculations are in agreement with the proposed mechanism. It is confirmed that HL 1 could be used to detect Al 3+ ions in real sample by fluorescence spectrometry and Al 3+ ions in cells by bioimaging. Copyright © 2018 Elsevier B.V. All rights reserved.

A novel strategy for high-stability lithium sulfur batteries by in situ formation of polysulfide adsorptive-blocking layer

NASA Astrophysics Data System (ADS)

Jin, Liming; Li, Gaoran; Liu, Binhong; Li, Zhoupeng; Zheng, Junsheng; Zheng, Jim P.

2017-07-01

Lithium sulfur (Lisbnd S) batteries are one of the most promising energy storage devices owing to their high energy and power density. However, the shuttle effect as a key barrier hinders its practical application by resulting in low coulombic efficiency and poor cycling performance. Herein, a novel design of in situ formed polysulfide adsorptive-blocking layer (PAL) on the cathode surface was developed to tame the polysulfide shuttling and promote the cycling stability for Lisbnd S batteries. The PAL is consisted of La2S3, which is capable to chemically adsorb polysulfide via the strong interaction of Lasbnd S bond and Ssbnd S bond, and build an effective barrier against sulfur escaping. Moreover, the La2S3 is capable to suppress the crystallization of Li2S and promote the ion transfer, which contributes to the reduced internal resistance of batteries. Furthermore, the by-product LiNO3 simultaneously forms a stable anode solid and electrolyte interface to further inhibit the polysulfide shuttle. By this simple and convenient method, the resultant Lisbnd S batteries achieved exceptional cycling stability with an ultralow decay rate of 0.055% since the 10th cycle.

Research with Large Area Imaging X-Ray Telescope Sounding Rocket Program

NASA Technical Reports Server (NTRS)

Gorenstein, Paul

1999-01-01

We are engaged in a program to develop focussing hard X-ray telescopes in a double conical or Wolter 1 geometry that function up to 100 keV by employing small graze angles and multilayer coatings. Directly polished substrates are not an option because they are too thick to be nested efficiently. The only alternative is to fabricate the very thin substrates by replication. Our objective is the production of integral cylindrical substrates because they should result in better angular resolution than segmented foil geometries. In addition, integral cylinders would be more resistant to possible stress from deep multilayer coatings than segmented ones. Both electroforming of nickel (method of SkX, JET-X, and XMM) and epoxy replication are under consideration. Both processes can utilize the same types of mandrels and separation agents- While electroforming can produce substrates that are thin, the high density of the nickel may result in high weight optics for some missions. For convenience, experimentation with replication and coating is being carried out initially on flats. Our replication studies include trials with gold and carbon separation agents. This paper reports on our efforts with epoxy replicated optics.

Li Distribution Heterogeneity in Solid Electrolyte Li10GeP2S12 upon Electrochemical Cycling Probed by 7Li MRI.

PubMed

Chien, Po-Hsiu; Feng, Xuyong; Tang, Mingxue; Rosenberg, Jens T; O'Neill, Sean; Zheng, Jin; Grant, Samuel C; Hu, Yan-Yan

2018-04-19

All-solid-state rechargeable batteries embody the promise for high energy density, increased stability, and improved safety. However, their success is impeded by high resistance for mass and charge transfer at electrode-electrolyte interfaces. Li deficiency has been proposed as a major culprit for interfacial resistance, yet experimental evidence is elusive due to the challenges associated with noninvasively probing the Li distribution in solid electrolytes. In this Letter, three-dimensional 7 Li magnetic resonance imaging (MRI) is employed to examine Li distribution homogeneity in solid electrolyte Li 10 GeP 2 S 12 within symmetric Li/Li 10 GeP 2 S 12 /Li batteries. 7 Li MRI and the derived histograms reveal Li depletion from the electrode-electrolyte interfaces and increased heterogeneity of Li distribution upon electrochemical cycling. Significant Li loss at interfaces is mitigated via facile modification with a poly(ethylene oxide)/bis(trifluoromethane)sulfonimide Li salt thin film. This study demonstrates a powerful tool for noninvasively monitoring the Li distribution at the interfaces and in the bulk of all-solid-state batteries as well as a convenient strategy for improving interfacial stability.

Effects of electrode settings on chlorine generation efficiency of electrolyzing seawater.

PubMed

Hsu, Guoo-Shyng Wang; Hsia, Chih-Wei; Hsu, Shun-Yao

2015-12-01

Electrolyzed water has significant disinfection effects, can comply with food safety regulations, and is environmental friendly. We investigated the effects of immersion depth of electrodes, stirring, electrode size, and electrode gap on the properties and chlorine generation efficiency of electrolyzing seawater and its storage stability. Results indicated that temperature and oxidation-reduction potential (ORP) of the seawater increased gradually, whereas electrical conductivity decreased steadily in electrolysis. During the electrolysis process, pH values and electric currents also decreased slightly within small ranges. Additional stirring or immersing the electrodes deep under the seawater significantly increased current density without affecting its electric efficiency and current efficiency. Decreasing electrode size or increasing electrode gap decreased chlorine production and electric current of the process without affecting its electric efficiency and current efficiency. Less than 35% of chlorine in the electrolyzed seawater was lost in a 3-week storage period. The decrement trend leveled off after the 1 st week of storage. The electrolyzing system is a convenient and economical method for producing high-chlorine seawater, which will have high potential applications in agriculture, aquaculture, or food processing. Copyright © 2015. Published by Elsevier B.V.

Mixed-use development in a high-rise context

NASA Astrophysics Data System (ADS)

Generalova, Elena M.; Generalov, Viktor P.; Kuznetsova, Anna A.; Bobkova, Oksana N.

2018-03-01

The article deals with an actual problem of finding techniques and methods to create a comfortable urban environment. The authors emphasize that in the existing conditions of intensive urban development greater attention should be given to spatial concentration based on and more compact distribution of population in urban space. It is stressed that including mixed-use facilities into urban realm results in a significant improvement of living environment qualitative characteristics. The paper also examines modern approaches to constructing a «compact city» for comfortable and convenient living with a mixed-use tall building development. The authors explore the world's experience of designing tall mixed-use buildings and reveal modern trends in their construction. The statistics given is based on the data analysis of a group of tall mixed-use buildings consisting of more than 400 objects, constructed in 2007-2016. The research shows functional and architectural peculiarities of this typology of tall buildings and investigates a mechanism of creating zones of mixed-use tall building development in the urban structure. In conclusion, the authors consider prospects of development and major directions of improvement of mixed-use tall building parameters for a reasonable territorial urban growth and creation of high-density and comfortable building development.

Electromagnetic potentials basis for energy density and power flux

NASA Astrophysics Data System (ADS)

Puthoff, H. E.

2016-09-01

In rounding out the education of students in advanced courses in applied electromagnetics it is incumbent on us as mentors to raise issues that encourage appreciation of certain subtle aspects that are often overlooked during first exposure to the field. One of these has to do with the interplay between fields and potentials, with the latter often seen as just a convenient mathematical artifice useful in solving Maxwell’s equations. Nonetheless, to those practiced in application it is well understood that various alternatives in the use of fields and potentials are available within electromagnetic (EM) theory for the definitions of energy density, momentum transfer, EM stress-energy tensor, and so forth. Although the various options are all compatible with the basic equations of electrodynamics (e.g., Maxwell’s equations, Lorentz force law, gauge invariance), nonetheless certain alternative formulations lend themselves to being seen as preferable to others with regard to the transparency of their application to physical problems of interest. Here we argue for the transparency of an energy density/power flux option based on the EM potentials alone.

Excitation of propagating magnetization waves by microstrip antennas

NASA Astrophysics Data System (ADS)

Dmitriev, V. F.; Kalinikos, B. A.

1988-11-01

We discuss the self-consistent theory of excitation of dipole-exchange magnetization waves by microstrip antennas in a metal-dielectric-ferrite-dielectric-metal stratified structure, magnetized under an arbitrary angle to the surface. Spin-wave Green's functions are derived, describing the response of the spin-system to a spatially inhomogeneous varying magnetic field. The radiative resistance of microstrip antenna is calculated. In this case the distribution of surface current density in the antenna is found on the basis of the analytic solution of a singular integral equation. The nature of the effect of metallic screens and redistributed surface current densities in the antenna on the frequency dependence of the resistive radiation is investigated. Approximate relations are obtained, convenient for practical calculations of radiative resistance of microstrip antennas both in a free and in a screened ferromagnetic film. The theoretical calculations are verified by data of experiments carried out on monocrystalline films of iron-yttrium garnet.

Extraction of Volatile Flavor Compounds From Tobacco Leaf Through a Low-Density Polyethylene Membrane.

PubMed

Yokoi, Michinori; Shimoda, Mitsuya

2017-03-01

A low-density polyethylene (LDPE) membrane pouch method was developed to extract volatile flavor compounds from tobacco leaf. Tobacco leaf suspended in water was enclosed in a pouch prepared from a LDPE membrane of specific gravity 0.92 g/cm3 and 0.03 mm thickness and then extracted with diethyl ether. In comparison with direct solvent extraction, LDPE membrane excluded larger and higher boiling point compounds which could contaminate a gas chromatograph inlet and damage a column. Whilst being more convenient than a reduced-pressure steam distillation, it could extract volatile flavor compounds of wide range of molecular weight and polarity. Repeatabilities in the extracted amounts were ranged from 0.38% of 2.3-bipyridyl to 26% of β-ionone, and average value of 39 compounds was 5.9%. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Biotechnology

NASA Image and Video Library

2003-05-07

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. In this picture, the beads are trapped in the injection port shortly after injection. Swirls of beads indicate, event to the naked eye, the contents of the TCM are not fully mixed. The beads are similar in size and density to human lymphoid cells. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, beads are trapped in the injection port, with bubbles forming shortly after injection.

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, a TCM is shown after mixing protocols, and bubbles of various sizes can be seen.

Human Induced Hepatic Lineage-Oriented Stem Cells: Autonomous Specification of Human iPS Cells toward Hepatocyte-Like Cells without Any Exogenous Differentiation Factors

PubMed Central

Yanagi, Satoshi; Kato, Chika; Takashima, Ryokichi; Kobayashi, Eiji; Hagiwara, Keitaro; Ochiya, Takahiro

2015-01-01

Preparing targeted cells for medical applications from human induced pluripotent stem cells (hiPSCs) using growth factors, compounds, or gene transfer has been challenging. Here, we report that human induced hepatic lineage-oriented stem cells (hiHSCs) were generated and expanded as a new type of hiPSC under non-typical coculture with feeder cells in a chemically defined hiPSC medium at a very high density. Self-renewing hiHSCs expressed markers of both human embryonic stem cells (hESCs) and hepatocytes. Those cells were highly expandable, markedly enhancing gene expression of serum hepatic proteins and cytochrome P450 enzymes with the omission of FGF-2 from an undefined hiPSC medium. The hepatic specification of hiHSCs was not attributable to the genetic and epigenetic backgrounds of the starting cells, as they were established from distinct donors and different types of cells. Approximately 90% of hiHSCs autonomously differentiated to hepatocyte-like cells, even in a defined minimum medium without any of the exogenous growth factors necessary for hepatic specification. After 12 days of this culture, the differentiated cells significantly enhanced gene expression of serum hepatic proteins (ALB, SERPINA1, TTR, TF, FABP1, FGG, AGT, RBP4, and AHSG), conjugating enzymes (UGT2B4, UGT2B7, UGT2B10, GSTA2, and GSTA5), transporters (SULT2A1, SLC13A5, and SLCO2B1), and urea cycle-related enzymes (ARG1 and CPS1). In addition, the hepatocyte-like cells performed key functions of urea synthesis, albumin secretion, glycogen storage, indocyanine green uptake, and low-density lipoprotein uptake. The autonomous hepatic specification of hiHSCs was due to their culture conditions (coculture with feeder cells in a defined hiPSC medium at a very high density) in self-renewal rather than in differentiation. These results suggest the feasibility of preparing large quantities of hepatocytes as a convenient and inexpensive hiPSC differentiation. Our study also suggests the necessity of optimizing culture conditions to generate other specific lineage-oriented hiPSCs, allowing for a very simple differentiation. PMID:25875613

The association between high-sensitivity C-reactive protein and metabolic risk factors in black and white South African women: a cross-sectional study.

PubMed

George, Cindy; Evans, Juliet; Micklesfield, Lisa K; Olsson, Tommy; Goedecke, Julia H

2018-01-01

High-sensitivity C-reactive protein (hsCRP) is associated with metabolic risk, however it is unclear whether the relationship is confounded by racial/ethnic differences in socioeconomic status (SES), lifestyle factors or central adiposity. The aims of the study was, (1) to investigate whether hsCRP levels differ by race/ethnicity; (2) to examine the race/ethnic-specific associations between hsCRP, HOMA-IR and serum lipids [total cholesterol (TC), triglycerides (TG), high-density lipoproteins (HDL-C) and low-density lipoproteins (LDL-C)]; and (3) to determine whether race/ethnic-specific associations are explained by SES, lifestyle factors or waist circumference (WC). The convenience sample comprised 195 black and 153 white apparently health women, aged 18-45 years. SES (education, assets and housing density) and lifestyle factors (alcohol use, physical activity and contraceptive use) were collected by questionnaire. Weight, height and WC were measured, and fasting blood samples collected for hsCRP, glucose, insulin, and lipids. Black women had higher age- and BMI-adjusted hsCRP levels than white women ( p  = 0.047). hsCRP was associated with HOMA-IR ( p  < 0.001), TG (p < 0.001), TC ( p  < 0.05), HDL-C (p < 0.05), and LDL-C ( p  < 0.05), independent of age and race/ethnicity. The association between hsCRP and lipids differed by race/ethnicity, such that hsCRP was positively associated with TG and LDL-C in white women, and inversely associated with HDL-C in black women. Higher hsCRP was also associated with higher TC in white women and lower TC in black women. Furthermore, when adjusting for SES and lifestyle factors, the associations between hsCRP, and TC and TG, remained, however the associations between hsCRP, and HDL-C and LDL-C, were no longer significant. Although circulating hsCRP may identify individuals at increased metabolic risk, the heterogeneity in these associations between racial/ethnic groups highlights the need for prospective studies investigating the role of hsCRP for risk prediction in different populations.

II. MORE THAN JUST CONVENIENT: THE SCIENTIFIC MERITS OF HOMOGENEOUS CONVENIENCE SAMPLES.

PubMed

Jager, Justin; Putnick, Diane L; Bornstein, Marc H

2017-06-01

Despite their disadvantaged generalizability relative to probability samples, nonprobability convenience samples are the standard within developmental science, and likely will remain so because probability samples are cost-prohibitive and most available probability samples are ill-suited to examine developmental questions. In lieu of focusing on how to eliminate or sharply reduce reliance on convenience samples within developmental science, here we propose how to augment their advantages when it comes to understanding population effects as well as subpopulation differences. Although all convenience samples have less clear generalizability than probability samples, we argue that homogeneous convenience samples have clearer generalizability relative to conventional convenience samples. Therefore, when researchers are limited to convenience samples, they should consider homogeneous convenience samples as a positive alternative to conventional (or heterogeneous) convenience samples. We discuss future directions as well as potential obstacles to expanding the use of homogeneous convenience samples in developmental science. © 2017 The Society for Research in Child Development, Inc.

A construct analysis of meal convenience applied to military foods.

PubMed

Jaeger, Sara R; Cardello, Armand V

2007-07-01

The present research investigates the concept of food convenience within the institutional framework of military feeding. The approach views food-related convenience in terms of two broad dimensions: "type of convenience" and "timing of convenience." A discrete choice experiment was conducted with US military personnel (n=179) regarding their perceptions of the (in)convenience associated with the use and consumption of low-preparation, all-in-one, military meals (MREs-meals, ready-to-eat). The obtained data strongly suggest that perceived (in)convenience, time and effort are separate constructs. A food provisioning process perspective was captured in the "timing of convenience" dimension, and the contribution of different stages in the consumption process to the perceived convenience of the meal situation was empirically demonstrated. The latter result has important implications for the study of food convenience outside this specific population and context. As opposed to the product perspective that is currently predominant in the literature, it demonstrates the necessity of adopting a meal perspective in analysing food-related convenience.

Electron transport model of dielectric charging

NASA Technical Reports Server (NTRS)

Beers, B. L.; Hwang, H. C.; Lin, D. L.; Pine, V. W.

1979-01-01

A computer code (SCCPOEM) was assembled to describe the charging of dielectrics due to irradiation by electrons. The primary purpose for developing the code was to make available a convenient tool for studying the internal fields and charge densities in electron-irradiated dielectrics. The code, which is based on the primary electron transport code POEM, is applicable to arbitrary dielectrics, source spectra, and current time histories. The code calculations are illustrated by a series of semianalytical solutions. Calculations to date suggest that the front face electric field is insufficient to cause breakdown, but that bulk breakdown fields can easily be exceeded.

SAS procedures for designing and analyzing sample surveys

USGS Publications Warehouse

Stafford, Joshua D.; Reinecke, Kenneth J.; Kaminski, Richard M.

2003-01-01

Complex surveys often are necessary to estimate occurrence (or distribution), density, and abundance of plants and animals for purposes of re-search and conservation. Most scientists are familiar with simple random sampling, where sample units are selected from a population of interest (sampling frame) with equal probability. However, the goal of ecological surveys often is to make inferences about populations over large or complex spatial areas where organisms are not homogeneously distributed or sampling frames are in-convenient or impossible to construct. Candidate sampling strategies for such complex surveys include stratified,multistage, and adaptive sampling (Thompson 1992, Buckland 1994).

Deconvolution of Stark broadened spectra for multi-point density measurements in a flow Z-pinch

DOE PAGES

Vogman, G. V.; Shumlak, U.

2011-10-13

Stark broadened emission spectra, once separated from other broadening effects, provide a convenient non-perturbing means of making plasma density measurements. A deconvolution technique has been developed to measure plasma densities in the ZaP flow Z-pinch experiment. The ZaP experiment uses sheared flow to mitigate MHD instabilities. The pinches exhibit Stark broadened emission spectra, which are captured at 20 locations using a multi-chord spectroscopic system. Spectra that are time- and chord-integrated are well approximated by a Voigt function. The proposed method simultaneously resolves plasma electron density and ion temperature by deconvolving the spectral Voigt profile into constituent functions: a Gaussian functionmore » associated with instrument effects and Doppler broadening by temperature; and a Lorentzian function associated with Stark broadening by electron density. The method uses analytic Fourier transforms of the constituent functions to fit the Voigt profile in the Fourier domain. The method is discussed and compared to a basic least-squares fit. The Fourier transform fitting routine requires fewer fitting parameters and shows promise in being less susceptible to instrumental noise and to contamination from neighboring spectral lines. The method is evaluated and tested using simulated lines and is applied to experimental data for the 229.69 nm C III line from multiple chords to determine plasma density and temperature across the diameter of the pinch. As a result, these measurements are used to gain a better understanding of Z-pinch equilibria.« less

Deconvolution of Stark broadened spectra for multi-point density measurements in a flow Z-pinch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogman, G. V.; Shumlak, U.

2011-10-15

Stark broadened emission spectra, once separated from other broadening effects, provide a convenient non-perturbing means of making plasma density measurements. A deconvolution technique has been developed to measure plasma densities in the ZaP flow Z-pinch experiment. The ZaP experiment uses sheared flow to mitigate MHD instabilities. The pinches exhibit Stark broadened emission spectra, which are captured at 20 locations using a multi-chord spectroscopic system. Spectra that are time- and chord-integrated are well approximated by a Voigt function. The proposed method simultaneously resolves plasma electron density and ion temperature by deconvolving the spectral Voigt profile into constituent functions: a Gaussian functionmore » associated with instrument effects and Doppler broadening by temperature; and a Lorentzian function associated with Stark broadening by electron density. The method uses analytic Fourier transforms of the constituent functions to fit the Voigt profile in the Fourier domain. The method is discussed and compared to a basic least-squares fit. The Fourier transform fitting routine requires fewer fitting parameters and shows promise in being less susceptible to instrumental noise and to contamination from neighboring spectral lines. The method is evaluated and tested using simulated lines and is applied to experimental data for the 229.69 nm C III line from multiple chords to determine plasma density and temperature across the diameter of the pinch. These measurements are used to gain a better understanding of Z-pinch equilibria.« less

Para I Famagu'on-Ta: Fruit and Vegetable Intake, Food Store Environment, and Childhood Overweight/Obesity in the Children's Healthy Living Program on Guam

PubMed Central

Matanane, Lenora; Silva, Joshua; Li, Fenfang; Nigg, Claudio; Leon Guerrero, Rachael T; Novotny, Rachel

2017-01-01

This cross-sectional study examined the: (1) association between food store environment (FSE), fruit and vegetable (FV) availability and access, and prevalence of early childhood overweight/obesity (COWOB); and (2) influence of young child actual FV intake on the relationship between the FSE and early COWOB prevalence. Anthropometric and socio-demographic data of children (2 to 8 years; N=466) in baseline communities on Guam participating in the Children's Healthy Living (CHL) Program community trial were included. CDC year 2000 growth charts were used to calculate BMI z-scores and categories. FSE factors (fresh FV scores, store type) were assessed using the CX3 Food Availability and Marketing Survey amended for CHL. ArcGIS maps were constructed with geographic coordinates of participant residences and food stores to calculate food store scores within 1 mile of participant's residences. A sub-sample of participants (n = 355) had Food and Activity Log data to calculate FV and energy intakes. Bivariate correlations and logistic regression evaluated associations. Of 111 stores surveyed, 73% were small markets, 16% were convenience stores, and 11% were large grocery/supermarkets. Supermarkets/large grocery stores averaged the highest FV scores. Most participants did not meet FV intake recommendations while nearly half exceeded energy intake recommendations. Living near a small market was negatively correlated with BMI z-score (r = - 0.129, P < .05) while living near a convenience store was positively correlated with BMI z-score (r = 0.092, P < .05). Logistic regression analysis yielded non-significant associations. The high density of small markets may be an opportunity for FSE intervention but further investigation of Guam's FSE influence on health is needed. PMID:28808612

Para I Famagu'on-Ta: Fruit and Vegetable Intake, Food Store Environment, and Childhood Overweight/Obesity in the Children's Healthy Living Program on Guam.

PubMed

Matanane, Lenora; Fialkowski, Marie Kainoa; Silva, Joshua; Li, Fenfang; Nigg, Claudio; Leon Guerrero, Rachael T; Novotny, Rachel

2017-08-01

This cross-sectional study examined the: (1) association between food store environment (FSE), fruit and vegetable (FV) availability and access, and prevalence of early childhood overweight/obesity (COWOB); and (2) influence of young child actual FV intake on the relationship between the FSE and early COWOB prevalence. Anthropometric and socio-demographic data of children (2 to 8 years; N=466) in baseline communities on Guam participating in the Children's Healthy Living (CHL) Program community trial were included. CDC year 2000 growth charts were used to calculate BMI z-scores and categories. FSE factors (fresh FV scores, store type) were assessed using the CX3 Food Availability and Marketing Survey amended for CHL. ArcGIS maps were constructed with geographic coordinates of participant residences and food stores to calculate food store scores within 1 mile of participant's residences. A sub-sample of participants (n = 355) had Food and Activity Log data to calculate FV and energy intakes. Bivariate correlations and logistic regression evaluated associations. Of 111 stores surveyed, 73% were small markets, 16% were convenience stores, and 11% were large grocery/supermarkets. Supermarkets/large grocery stores averaged the highest FV scores. Most participants did not meet FV intake recommendations while nearly half exceeded energy intake recommendations. Living near a small market was negatively correlated with BMI z-score (r = - 0.129, P < .05) while living near a convenience store was positively correlated with BMI z-score (r = 0.092, P < .05). Logistic regression analysis yielded non-significant associations. The high density of small markets may be an opportunity for FSE intervention but further investigation of Guam's FSE influence on health is needed.

Predictors of validity and reliability of a physical activity record in adolescents

PubMed Central

2013-01-01

Background Poor to moderate validity of self-reported physical activity instruments is commonly observed in young people in low- and middle-income countries. However, the reasons for such low validity have not been examined in detail. We tested the validity of a self-administered daily physical activity record in adolescents and assessed if personal characteristics or the convenience level of reporting physical activity modified the validity estimates. Methods The study comprised a total of 302 adolescents from an urban and rural area in Ecuador. Validity was evaluated by comparing the record with accelerometer recordings for seven consecutive days. Test-retest reliability was examined by comparing registrations from two records administered three weeks apart. Time spent on sedentary (SED), low (LPA), moderate (MPA) and vigorous (VPA) intensity physical activity was estimated. Bland Altman plots were used to evaluate measurement agreement. We assessed if age, sex, urban or rural setting, anthropometry and convenience of completing the record explained differences in validity estimates using a linear mixed model. Results Although the record provided higher estimates for SED and VPA and lower estimates for LPA and MPA compared to the accelerometer, it showed an overall fair measurement agreement for validity. There was modest reliability for assessing physical activity in each intensity level. Validity was associated with adolescents’ personal characteristics: sex (SED: P = 0.007; LPA: P = 0.001; VPA: P = 0.009) and setting (LPA: P = 0.000; MPA: P = 0.047). Reliability was associated with the convenience of completing the physical activity record for LPA (low convenience: P = 0.014; high convenience: P = 0.045). Conclusions The physical activity record provided acceptable estimates for reliability and validity on a group level. Sex and setting were associated with validity estimates, whereas convenience to fill out the record was associated with better reliability estimates for LPA. This tendency of improved reliability estimates for adolescents reporting higher convenience merits further consideration. PMID:24289296

(125)I-Tetrazines and Inverse-Electron-Demand Diels-Alder Chemistry: A Convenient Radioiodination Strategy for Biomolecule Labeling, Screening, and Biodistribution Studies.

PubMed

Albu, Silvia A; Al-Karmi, Salma A; Vito, Alyssa; Dzandzi, James P K; Zlitni, Aimen; Beckford-Vera, Denis; Blacker, Megan; Janzen, Nancy; Patel, Ramesh M; Capretta, Alfredo; Valliant, John F

2016-01-20

A convenient method to prepare radioiodinated tetrazines was developed, such that a bioorthogonal inverse electron demand Diels-Alder reaction can be used to label biomolecules with iodine-125 for in vitro screening and in vivo biodistribution studies. The tetrazine was prepared by employing a high-yielding oxidative halo destannylation reaction that concomitantly oxidized the dihydrotetrazine precursor. The product reacts quickly and efficiently with trans-cyclooctene derivatives. Utility was demonstrated through antibody and hormone labeling experiments and by evaluating products using standard analytical methods, in vitro assays, and quantitative biodistribution studies where the latter was performed in direct comparison to Bolton-Hunter and direct iodination methods. The approach described provides a convenient and advantageous alternative to conventional protein iodination methods that can expedite preclinical development and evaluation of biotherapeutics.

Estimating risks to aquatic life using quantile regression

USGS Publications Warehouse

Schmidt, Travis S.; Clements, William H.; Cade, Brian S.

2012-01-01

One of the primary goals of biological assessment is to assess whether contaminants or other stressors limit the ecological potential of running waters. It is important to interpret responses to contaminants relative to other environmental factors, but necessity or convenience limit quantification of all factors that influence ecological potential. In these situations, the concept of limiting factors is useful for data interpretation. We used quantile regression to measure risks to aquatic life exposed to metals by including all regression quantiles (τ  =  0.05–0.95, by increments of 0.05), not just the upper limit of density (e.g., 90th quantile). We measured population densities (individuals/0.1 m2) of 2 mayflies (Rhithrogena spp., Drunella spp.) and a caddisfly (Arctopsyche grandis), aqueous metal mixtures (Cd, Cu, Zn), and other limiting factors (basin area, site elevation, discharge, temperature) at 125 streams in Colorado. We used a model selection procedure to test which factor was most limiting to density. Arctopsyche grandis was limited by other factors, whereas metals limited most quantiles of density for the 2 mayflies. Metals reduced mayfly densities most at sites where other factors were not limiting. Where other factors were limiting, low mayfly densities were observed despite metal concentrations. Metals affected mayfly densities most at quantiles above the mean and not just at the upper limit of density. Risk models developed from quantile regression showed that mayfly densities observed at background metal concentrations are improbable when metal mixtures are at US Environmental Protection Agency criterion continuous concentrations. We conclude that metals limit potential density, not realized average density. The most obvious effects on mayfly populations were at upper quantiles and not mean density. Therefore, we suggest that policy developed from mean-based measures of effects may not be as useful as policy based on the concept of limiting factors.

Associations between children's diets and features of their residential and school neighbourhood food environments.

PubMed

Van Hulst, Andraea; Barnett, Tracie A; Gauvin, Lise; Daniel, Mark; Kestens, Yan; Bird, Madeleine; Gray-Donald, Katherine; Lambert, Marie

2012-07-26

Among studies of the built environment, few examine neighbourhood food environments in relation to children's diets. We examined the associations of residential and school neighbourhood access to different types of food establishments with children's diets. Data from QUALITY (Quebec Adipose and Lifestyle Investigation in Youth), an ongoing study on the natural history of obesity in 630 Quebec youth aged 8-10 years with a parental history of obesity, were analyzed (n=512). Three 24-hour diet recalls were used to assess dietary intake of vegetables and fruit, and sugar-sweetened beverages. Questionnaires were used to determine the frequency of eating/snacking out and consumption of delivered/take-out foods. We characterized residential and school neighbourhood food environments by means of a Geographic Information System. Variables included distance to the nearest supermarket, fast-food restaurant and convenience store, and densities of each food establishment type computed for 1 km network buffers around each child's residence and school. Retail Food Environment indices were also computed. Multivariable logistic regressions (residential access) and generalized estimating equations (school access) were used for analysis. Residential and school neighbourhood access to supermarkets was not associated with children's diets. Residing in neighbourhoods with lower access to fast-food restaurants and convenience stores was associated with a lower likelihood of eating and snacking out. Children attending schools in neighbourhoods with a higher number of unhealthful relative to healthful food establishments scored most poorly on dietary outcomes. Further investigations are needed to inform policies aimed at shaping neighbourhood-level food purchasing opportunities, particularly for access to fast-food restaurants and convenience stores.

Physical, mental, and cognitive function in a convenience sample of centenarians in Australia.

PubMed

Richmond, Robyn L; Law, Jenaleen; Kay-Lambkin, Frances

2011-06-01

To examine the physical, mental, and cognitive function of centenarians. Descriptive study using a structured questionnaire and convenience sampling. Residential care facilities and private dwellings in Australia. A convenience sample of 188 centenarians. The Hospital Anxiety and Depression Scale (HADS) screened for anxiety and depression. The Katz Index of Independence in Activities of Daily Living (Katz ADL) was used to assess functional status. The Quality of Life Scale was used to assess quality of life. The Mini-Mental State Examination (MMSE) was used to screen for dementia. Structured responses were obtained for living arrangement, marital status, social relationships, and supports. Centenarians had regular contact with friends (59%), neighbors (62%), and families (72%); 54% were religious and 43.5% had received social supports. Average MMSE and Katz ADL scores were 21.5 and 3.7, respectively; 45% had scores on the MMSE indicative of dementia, 10% indicated anxiety and 14% depression on the HADS. Participants with poor ratings of health experienced higher rates of anxiety and depression than their healthier counterparts. In this convenience sample of Australian centenarians, anxiety and depression was relatively nonexistent, and most reported a high quality of life. This was despite objective deterioration in functional status, paralleling the aging process, and high dependence on others for everyday tasks. Potentially, this is suggestive of a unique ability within the sample to adapt to aging and its limitations. © 2011, Copyright the Authors. Journal compilation © 2011, The American Geriatrics Society.

The good, the bad and the dubious: VHELIBS, a validation helper for ligands and binding sites

PubMed Central

2013-01-01

Background Many Protein Data Bank (PDB) users assume that the deposited structural models are of high quality but forget that these models are derived from the interpretation of experimental data. The accuracy of atom coordinates is not homogeneous between models or throughout the same model. To avoid basing a research project on a flawed model, we present a tool for assessing the quality of ligands and binding sites in crystallographic models from the PDB. Results The Validation HElper for LIgands and Binding Sites (VHELIBS) is software that aims to ease the validation of binding site and ligand coordinates for non-crystallographers (i.e., users with little or no crystallography knowledge). Using a convenient graphical user interface, it allows one to check how ligand and binding site coordinates fit to the electron density map. VHELIBS can use models from either the PDB or the PDB_REDO databank of re-refined and re-built crystallographic models. The user can specify threshold values for a series of properties related to the fit of coordinates to electron density (Real Space R, Real Space Correlation Coefficient and average occupancy are used by default). VHELIBS will automatically classify residues and ligands as Good, Dubious or Bad based on the specified limits. The user is also able to visually check the quality of the fit of residues and ligands to the electron density map and reclassify them if needed. Conclusions VHELIBS allows inexperienced users to examine the binding site and the ligand coordinates in relation to the experimental data. This is an important step to evaluate models for their fitness for drug discovery purposes such as structure-based pharmacophore development and protein-ligand docking experiments. PMID:23895374

The Relationship between Ionospheric Slab Thickness and the Peak Density Height, hmF2

NASA Astrophysics Data System (ADS)

Meehan, J.; Sojka, J. J.

2017-12-01

The electron density profile is one of the most critical elements in the ionospheric modeling-related applications today. Ionosphere parameters, hmF2, the height of the peak density layer, and slab thickness, the ratio of the total electron content, TEC, to the peak density value, NmF2, are generally obtained from any global sounding observation network and are easily incorporated into models, theoretical or empirical, as numerical representations. Slab thickness is a convenient one-parameter summary of the electron density profile and can relate a variety of elements of interest that effect the overall electron profile shape, such as the neutral and ionospheric temperatures and gradients, the ionospheric composition, and dynamics. Using ISR data from the 2002 Millstone Hill ISR data campaign, we found, for the first time, slab thickness to be correlated to hmF2. For this, we introduce a new ionospheric index, k, which ultimately relates electron density parameters and can be a very useful tool for describing the topside ionosphere shape. Our study is an initial one location, one season, 30-day study, and future work is needed to verify the robustness of our claim. Generally, the ionospheric profile shape, requires knowledge of several ionospheric parameters: electron, ion and neutral temperatures, ion composition, electric fields, and neutral winds, and is dependent upon seasons, local time, location, and the level of solar and geomagnetic activity; however, with this new index, only readily-available, ionospheric density information is needed. Such information, as used in this study, is obtained from a bottomside electron density profile provided by an ionosonde, and TEC data provided by a local, collocated GPS receiver.

48 CFR 8.406-5 - Termination for the Government's convenience.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Government's convenience. 8.406-5 Section 8.406-5 Federal Acquisition Regulations System FEDERAL ACQUISITION... Termination for the Government's convenience. (a) An ordering activity contracting officer may terminate individual orders for the Government's convenience. Terminations for the Government's convenience shall...

A Numerical Fit of Analytical to Simulated Density Profiles in Dark Matter Haloes

NASA Astrophysics Data System (ADS)

Caimmi, R.; Marmo, C.; Valentinuzzi, T.

2005-06-01

Analytical and geometrical properties of generalized power-law (GPL) density profiles are investigated in detail. In particular, a one-to-one correspondence is found between mathematical parameters (a scaling radius, r_0, a scaling density, rho_0, and three exponents, alpha, beta, gamma), and geometrical parameters (the coordinates of the intersection of the asymptotes, x_C, y_C, and three vertical intercepts, b, b_beta, b_gamma, related to the curve and the asymptotes, respectively): (r_0,rho_0,alpha,beta,gamma) <--> (x_C,y_C,b,b_beta,b_gamma). Then GPL density profiles are compared with simulated dark haloes (SDH) density profiles, and nonlinear least-absolute values and least-squares fits involving the above mentioned five parameters (RFSM5 method) are prescribed. More specifically, the sum of absolute values or squares of absolute logarithmic residuals, R_i= log rhoSDH(r_i)-log rhoGPL(r_i), is evaluated on 10^5 points making a 5- dimension hypergrid, through a few iterations. The size is progressively reduced around a fiducial minimum, and superpositions on nodes of earlier hypergrids are avoided. An application is made to a sample of 17 SDHs on the scale of cluster of galaxies, within a flat LambdaCDM cosmological model (Rasia et al. 2004). In dealing with the mean SDH density profile, a virial radius, rvir, averaged over the whole sample, is assigned, which allows the calculation of the remaining parameters. Using a RFSM5 method provides a better fit with respect to other methods. The geometrical parameters, averaged over the whole sample of best fitting GPL density profiles, yield (alpha,beta,gamma) approx(0.6,3.1,1.0), to be compared with (alpha,beta,gamma)=(1,3,1), i.e. the NFW density profile (Navarro et al. 1995, 1996, 1997), (alpha,beta,gamma)=(1.5,3,1.5) (Moore et al. 1998, 1999), (alpha,beta,gamma)=(1,2.5,1) (Rasia et al. 2004); and, in addition, gamma approx 1.5 (Hiotelis 2003), deduced from the application of a RFSM5 method, but using a different definition of scaled radius, or concentration; and gamma approx 1.2-1.3 deduced from more recent high-resolution simulations (Diemand et al. 2004, Reed et al. 2005). No evident correlation is found between SDH dynamical state (relaxed or merging) and asymptotic inner slope of the fitting logarithmic density profile or (for SDH comparable virial masses) scaled radius. Mean values and standard deviations of some parameters are calculated, and in particular the decimal logarithm of the scaled radius, xivir, reads < log xivir >=0.74 and sigma_s log xivir=0.15-0.17, consistent with previous results related to NFW density profiles. It provides additional support to the idea, that NFW density profiles may be considered as a convenient way to parametrize SDH density profiles, without implying that it necessarily produces the best possible fit (Bullock et al. 2001). A certain degree of degeneracy is found in fitting GPL to SDH density profiles. If it is intrinsic to the RFSM5 method or it could be reduced by the next generation of high-resolution simulations, still remains an open question.

Exploring the relationship between convenience and fish consumption: a cross-cultural study.

PubMed

Olsen, Svein Ottar; Scholderer, Joachim; Brunsø, Karen; Verbeke, Wim

2007-07-01

The purpose of the present study is to explore cultural differences in the meaning of convenience and the relationships between convenience, attitudes and fish consumption in five European countries. The results suggest that the meaning of meal convenience is not culture specific, whilst the absolute levels of convenience orientation and the perceived inconvenience of fish differ between cultures. Convenience orientation was highest in Poland, followed by Spain, and was lowest in the Netherlands. The relationships between convenience orientation and attitudes towards fish, and convenience orientation and fish consumption, were insignificant in most countries. However, convenience orientation was positively related to the perceived inconvenience of fish. Perceived inconvenience of fish was negatively related to both attitudes towards fish and to fish consumption. Together, these results confirm some earlier findings that fish is generally perceived as a relatively inconvenient type of food. This study suggests that convenience orientation can be crucial to understanding food choice or behaviour only when critical mediating constructs are explored.

The Association between Density of Alcohol Establishments and Violent Crime within Urban Neighborhoods

PubMed Central

Toomey, Traci L.; Erickson, Darin J.; Carlin, Bradley P.; Lenk, Kathleen M.; Quick, Harrison S.; Jones, Alexis M.; Harwood, Eileen M.

2012-01-01

Background Numerous studies have found that areas with higher alcohol establishment density are more likely to have higher violent crime rates but many of these studies did not assess the differential effects of type of establishments or the effects on multiple categories of crime. In this study, we assess whether alcohol establishment density is associated with four categories of violent crime, and whether the strength of the associations varies by type of violent crime and by on-premise establishments (e.g., bars, restaurants) versus off-premise establishments (e.g., liquor and convenience stores). Methods Data come from the city of Minneapolis, Minnesota in 2009 and were aggregated and analyzed at the neighborhood level. Across the 83 neighborhoods in Minneapolis, we examined four categories of violent crime: assault, rape, robbery, and total violent crime. We used a Bayesian hierarchical inference approach to model the data, accounting for spatial auto-correlation and controlling for relevant neighborhood demographics. Models were estimated for total alcohol establishment density as well as separately for on-premise establishments and off-premise establishments. Results Positive, statistically significant associations were observed for total alcohol establishment density and each of the violent crime outcomes. We estimate that a 3.9% to 4.3% increase across crime categories would result from a 20% increase in neighborhood establishment density. The associations between on-premise density and each of the individual violent crime outcomes were also all positive and significant and similar in strength as for total establishment density. The relationships between off-premise density and the crime outcomes were all positive but not significant for rape or total violent crime, and the strength of the associations was weaker than those for total and on-premise density. Conclusions Results of this study, combined with earlier findings, provide more evidence that community leaders should be cautious about increasing the density of alcohol establishments within their neighborhoods. PMID:22587231

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China.

PubMed

Kim, Boram; Joo, Nami

2014-06-01

Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste.

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China

PubMed Central

Kim, Boram

2014-01-01

BACKGROUND/OBJECTIVES Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. SUBJECTS/METHODS The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. RESULTS Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. CONCLUSIONS The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste. PMID:24944777

VizieR Online Data Catalog: EBHIS spectra and HI column density maps (Winkel+, 2016)

NASA Astrophysics Data System (ADS)

Winkel, B.; Kerp, J.; Floeer, L.; Kalberla, P. M. W.; Ben Bekhti, N.; Keller, R.; Lenz, D.

2015-11-01

The EBHIS 1st data release comprises 21-cm neutral atomic hydrogen data of the Milky Way (-600km/s

Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation.

PubMed

Markovic, Marica; Van Hoorick, Jasper; Hölzl, Katja; Tromayer, Maximilian; Gruber, Peter; Nürnberger, Sylvia; Dubruel, Peter; Van Vlierberghe, Sandra; Liska, Robert; Ovsianikov, Aleksandr

2015-05-01

Three-dimensional (3D) printing offers versatile possibilities for adapting the structural parameters of tissue engineering scaffolds. However, it is also essential to develop procedures allowing efficient cell seeding independent of scaffold geometry and pore size. The aim of this study was to establish a method for seeding the scaffolds using photopolymerizable cell-laden hydrogels. The latter facilitates convenient preparation, and handling of cell suspension, while distributing the hydrogel precursor throughout the pores, before it is cross-linked with light. In addition, encapsulation of living cells within hydrogels can produce constructs with high initial cell loading and intimate cell-matrix contact, similar to that of the natural extra-cellular matrix (ECM). Three dimensional scaffolds were produced from poly(lactic) acid (PLA) by means of fused deposition modeling. A solution of methacrylamide-modified gelatin (Gel-MOD) in cell culture medium containing photoinitiator Li-TPO-L was used as a hydrogel precursor. Being an enzymatically degradable derivative of natural collagen, gelatin-based matrices are biomimetic and potentially support the process of cell-induced remodeling. Preosteoblast cells MC3T3-E1 at a density of 10 × 10 6 cells per 1 mL were used for testing the seeding procedure and cell proliferation studies. Obtained results indicate that produced constructs support cell survival and proliferation over extended duration of our experiment. The established two-step approach for scaffold seeding with the cells is simple, rapid, and is shown to be highly reproducible. Furthermore, it enables precise control of the initial cell density, while yielding their uniform distribution throughout the scaffold. Such hybrid tissue engineering constructs merge the advantages of rigid 3D printed constructs with the soft hydrogel matrix, potentially mimicking the process of ECM remodeling.

Salt as a public health challenge in continental European convenience and ready meals.

PubMed

Kanzler, Sonja; Hartmann, Christina; Gruber, Anita; Lammer, Guido; Wagner, Karl-Heinz

2014-11-01

To assess the salt content of continental European convenience and ready meals. A multistage study in which, after laboratory analysis of the products' salt contents (n 32), new salt-reduced meals were developed through food reformulation. Additionally, a comprehensive survey of convenience meals from the Austrian market (n 572) was conducted to evaluate the salt contents of a wider product range. Six continental European countries participated. No subjects enrolled. The salt contents of continental European convenience and ready meals mostly exceeded 1·8 g/100 g, which is 30 % of the targeted daily intake level; some contained even more than the recommended daily intake of 6 g. The highest salt contents were found in pizzas and pasta dishes, the lowest ones in sweet meals. Large variations in salt levels were found not only between and within meal type categories, but also between similar meals from different producers. In addition, our approach to develop new salt-reduced meals showed that a stepwise reduction of the ready meals' salt contents is possible without compromising the sensory quality. To address the problem of hypertension and increased risk for CVD through high salt intake, a reduction of the salt levels in continental European convenience and ready meals is urgently needed, since they are providing a major part of the daily salt intake. Successful national-wide salt reduction strategies in the UK or Finland have already demonstrated the public health impact of this setting.

The convenience food market in Great Britain: convenience food lifestyle (CFL) segments.

PubMed

Buckley, Marie; Cowan, Cathal; McCarthy, Mary

2007-11-01

Convenience foods enable the consumer to save time and effort in food activities, related to shopping, meal preparation and cooking, consumption and post-meal activities. The objective of this paper is to report on the attitudes and reported behaviour of food consumers in Great Britain based on a review of their convenience food lifestyle (CFLs). The paper also reports the development and application of a segmentation technique that can supply information on consumer attitudes towards convenience foods. The convenience food market in Great Britain is examined and the key drivers of growth in this market are highlighted. A survey was applied to a nationally representative sample of 1000 consumers (defined as the persons primarily responsible for food shopping and cooking in the household) in Great Britain in 2002. Segmentation analysis, based on the identification of 20 convenience lifestyle factors, identified four CFL segments of consumers: the 'food connoisseurs' (26%), the 'home meal preparers' (25%), the 'kitchen evaders' (16%) and the 'convenience-seeking grazers' (33%). In particular, the 'kitchen evaders' and the 'convenience-seeking grazers' are identified as convenience-seeking segments. Implications for food producers, in particular, convenience food manufacturers are discussed. The study provides an understanding of the lifestyles of food consumers in Great Britain, and provides food manufacturers with an insight into what motivates individuals to purchase convenience foods.

An efficient protocol for the synthesis of highly sensitive indole imines utilizing green chemistry: optimization of reaction conditions.

PubMed

Nisar, Bushra; Rubab, Syeda Laila; Raza, Abdul Rauf; Tariq, Sobia; Sultan, Ayesha; Tahir, Muhammad Nawaz

2018-04-11

Novel and highly sensitive indole-based imines have been synthesized. Their synthesis has been compared employing a variety of protocols. Ultimately, a convenient, economical and high yielding set of conditions employing green chemistry have been designed for their synthesis.

Convenience stores surrounding urban schools: an assessment of healthy food availability, advertising, and product placement.

PubMed

Gebauer, Hilary; Laska, Melissa Nelson

2011-08-01

Adolescent obesity is a national public health problem, particularly among urban populations. Recent evidence has linked neighborhood food environments to health and nutrition status, with easier access to convenience stores being associated with increased risk for obesity. Little is known about the availability of healthy purchasing options within small, urban food stores, or the extent to which these factors are relevant to youth. The objective of this research was to characterize various features of the food environment within small convenience stores located nearby urban junior high and high schools. In-store audits were conducted in 63 stores located within 800 m of 36 urban Minnesota public secondary schools. Results indicated that a limited number of healthier beverages (i.e., water and 100% fruit juice) and snack options (i.e., nuts and pretzels) were available at most stores (≥85%). However, a wide range of healthy snack options were typically not available, with many specific items stocked in less than half of stores (e.g., low-fat yogurt in 27% of stores and low-fat granola bars in 43%). Overall, 51% of stores had fresh fruit and 49% had fresh vegetables. Few stores carried a range of healthier snack alternatives in single-serving packages. All stores had less healthful impulse purchase items available (e.g., candy) while only 46% carried healthier impulse items (e.g., fruit). Most stores (97%) had food/beverage advertising. Overall, convenience stores located in close proximity to secondary schools represent an important and understudied component of the youth food environment.

Social marketing of condoms (female, too) gets going (again). Zimbabwe.

PubMed

Winter, J

1997-04-01

More than 10% of Zimbabwe's population is thought to be infected with HIV. Protector condoms, marketed by Johnson and Johnson (Zimbabwe), have been available in Zimbabwe for several years, but supplies often ran out due to contractual difficulties with the US Agency for International Development (USAID). Population Services International (PSI), with the financial support of Britain's Overseas Development Administration (ODA) and USAID, has relaunched the condom social marketing program in Zimbabwe and will also introduce female condoms for the first time in May. Selling for about Z$1 (US$0.09) each, the subsidized male condoms will be marketed in places where the public sector cannot go, such as gas stations, supermarkets, convenience grocery stores in high-density suburbs, beer halls, and night clubs. Approximately 5 million condoms are expected to be sold in 1997, although most condoms will still be supplied free of charge through the public sector. The female condoms will be priced at Z$3 each. PSI hopes to sell 40,000 per year, while another 400,000 will be given away in hospitals, family planning clinics, and other public health services.

Observation of microwave absorption and emission from incoherent electron tunneling through a normal-metal-insulator-superconductor junction.

PubMed

Masuda, Shumpei; Tan, Kuan Y; Partanen, Matti; Lake, Russell E; Govenius, Joonas; Silveri, Matti; Grabert, Hermann; Möttönen, Mikko

2018-03-02

We experimentally study nanoscale normal-metal-insulator-superconductor junctions coupled to a superconducting microwave resonator. We observe that bias-voltage-controllable single-electron tunneling through the junctions gives rise to a direct conversion between the electrostatic energy and that of microwave photons. The measured power spectral density of the microwave radiation emitted by the resonator exceeds at high bias voltages that of an equivalent single-mode radiation source at 2.5 K although the phonon and electron reservoirs are at subkelvin temperatures. Measurements of the generated power quantitatively agree with a theoretical model in a wide range of bias voltages. Thus, we have developed a microwave source which is compatible with low-temperature electronics and offers convenient in-situ electrical control of the incoherent photon emission rate with a predetermined frequency, without relying on intrinsic voltage fluctuations of heated normal-metal components or suffering from unwanted losses in room temperature cables. Importantly, our observation of negative generated power at relatively low bias voltages provides a novel type of verification of the working principles of the recently discovered quantum-circuit refrigerator.

Food choices and diet costs: an economic analysis.

PubMed

Drewnowski, Adam; Darmon, Nicole

2005-04-01

Obesity in the United States is a socioeconomic issue. It is related to limited social and economic resources and may be linked to disparities in access to healthy foods. Added sugars and added fats are far more affordable than are the recommended "healthful" diets based on lean meats, whole grains, and fresh vegetables and fruit. There is an inverse relationship between energy density of foods (kJ/g) and energy cost ($/MJ), such that energy-dense grains, fats, and sweets represent the lowest-cost dietary options to the consumer. Good taste, high convenience, and the low cost of energy-dense foods, in conjunction with large portions and low satiating power, may be the principal reasons for overeating and weight gain. Financial disparities in access to healthier diets may help explain why the highest rates of obesity and diabetes are found among minorities and the working poor. If so, then encouraging low-income households to consume more costly foods is not an effective strategy for public health. What is needed is a comprehensive policy approach that takes behavioral nutrition and the economics of food choice into account.

Urban local climate zone mapping and apply in urban environment study

NASA Astrophysics Data System (ADS)

He, Shan; Zhang, Yunwei; Zhang, Jili

2018-02-01

The city’s local climate zone (LCZ) was considered to be a powerful tool for urban climate mapping. But for cities in different countries and regions, the LCZ division methods and results were different, thus targeted researches should be performed. In the current work, a LCZ mapping method was proposed, which is convenient in operation and city planning oriented. In this proposed method, the local climate zoning types were adjusted firstly, according to the characteristics of Chinese city, that more tall buildings and high density. Then the classification method proposed by WUDAPT based on remote sensing data was performed on Xi’an city, as an example, for LCZ mapping. Combined with the city road network, a reasonable expression of the dividing results was provided, to adapt to the characteristics in city planning that land parcels are usually recognized as the basic unit. The proposed method was validated against the actual land use and construction data that surveyed in Xi’an, with results indicating the feasibility of the proposed method for urban LCZ mapping in China.

Low-temperature internal friction in quenched amorphous selenium films

NASA Astrophysics Data System (ADS)

Metcalf, Thomas; Liu, Xiao; Abernathy, Matthew; Stephens, Richard

Using ultra-high-quality-factor silicon mechanical resonators, we have measured the internal friction and shear modulus of amorphous selenium (a-Se) films at liquid helium temperatures. The glass transition temperature of selenium lies at a conveniently accessible 40 -50° C, facilitating a series of in- and ex-situ annealing and quench cycles. The a-Se films exhibit the low-temperature internal friction plateau (10-4 <=Q-1 <=10-3) found in almost all amorphous solids, which is a result of (and direct measure of) a broad distribution of two-level tunneling systems (TLS), whose origin is still unknown. We find a clear correlation between the post-anneal quench rate and the value of this plateau. The implications of these observations for understanding the microscopic origin of TLS will be discussed. Principally, the observed changes in the internal friction plateau could show the way in which the density of TLS could be manipulated or suppressed in other amorphous systems. Work supported by the Office of Naval Research and the University of Pennsylvania Materials Research Science and Engineering Center.

Novel One-pot Fabrication of Lab-on-a-Bubble@Ag Substrate without Coupling-agent for Surface Enhanced Raman Scattering

NASA Astrophysics Data System (ADS)

Jiang, Jizhou; Ou-Yang, Lei; Zhu, Lihua; Zou, Jing; Tang, Heqing

2014-02-01

Through in-situ reduction of silver nitrate without using any coupling-agent, a substrate for surface-enhanced Raman scattering (SERS) was prepared by coating silver on hollow buoyant silica microspheres as a lab on a bubble (LoB). The silver coated LoBs (LoBs@Ag) floated on surface of a solution could provide a very convenient platform for the detection of target molecules in the solution. The LoBs@Ag substrate not only immobilized well-distributed Ag nanoparticles on the surface LoBs, but excluded the interference of coupling agents. This yielded high-resolution SERS spectra with excellent reproducibility. The adsorption of crystal violet (CV) on the LoBs@Ag substrate was investigated by means of SERS combined with density functional theory (DFT) calculations. The LoBs@Ag substrate exhibited a remarkable Raman enhancement effect for CV with an enhancement factor of 6.9 × 108 and wide adaptability from dye, pesticide to bio-molecules. On the basis of this substrate, a simple and sensitive SERS method was proposed for the determination of trace organic pollutants or bio-molecules.

Non-Gaussian Analysis of Turbulent Boundary Layer Fluctuating Pressure on Aircraft Skin Panels

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Steinwolf, Alexander

2005-01-01

The purpose of the study is to investigate the probability density function (PDF) of turbulent boundary layer fluctuating pressures measured on the outer sidewall of a supersonic transport aircraft and to approximate these PDFs by analytical models. Experimental flight results show that the fluctuating pressure PDFs differ from the Gaussian distribution even for standard smooth surface conditions. The PDF tails are wider and longer than those of the Gaussian model. For pressure fluctuations in front of forward-facing step discontinuities, deviations from the Gaussian model are more significant and the PDFs become asymmetrical. There is a certain spatial pattern of the skewness and kurtosis behavior depending on the distance upstream from the step. All characteristics related to non-Gaussian behavior are highly dependent upon the distance from the step and the step height, less dependent on aircraft speed, and not dependent on the fuselage location. A Hermite polynomial transform model and a piecewise-Gaussian model fit the flight data well both for the smooth and stepped conditions. The piecewise-Gaussian approximation can be additionally regarded for convenience in usage after the model is constructed.

A multi-block adaptive solving technique based on lattice Boltzmann method

NASA Astrophysics Data System (ADS)

Zhang, Yang; Xie, Jiahua; Li, Xiaoyue; Ma, Zhenghai; Zou, Jianfeng; Zheng, Yao

2018-05-01

In this paper, a CFD parallel adaptive algorithm is self-developed by combining the multi-block Lattice Boltzmann Method (LBM) with Adaptive Mesh Refinement (AMR). The mesh refinement criterion of this algorithm is based on the density, velocity and vortices of the flow field. The refined grid boundary is obtained by extending outward half a ghost cell from the coarse grid boundary, which makes the adaptive mesh more compact and the boundary treatment more convenient. Two numerical examples of the backward step flow separation and the unsteady flow around circular cylinder demonstrate the vortex structure of the cold flow field accurately and specifically.

Observation of fast sound in disparate-mass gas mixtures by light scattering

NASA Astrophysics Data System (ADS)

Wegdam, G. H.; Bot, Arjen; Schram, R. P. C.; Schaink, H. M.

1989-12-01

We performed light-scattering experiments on a mixture of hydrogen and argon. By varying the density of the sample, we can probe the range of reduced wave vectors in which Campa and Cohen [Phys. Rev. A 39, 4909 (1989)] predicted, in dilute disparate-mass gas mixtures, the onset of a mode supported by the light particles: the fast sound mode. The presence of the additional sound mode can be established most conveniently by analyzing ω2I(k,ω) rather than I(k,ω). Our results for the shift of fast and slow sound match the theoretical predictions very well.

Dietary habits, lifestyle pattern and obesity among young Saudi university students.

PubMed

Khabaz, Mohamad Nidal; Bakarman, Marwan Abdulrahman; Baig, Mukhtiar; Ghabrah, Tawfik Mohammed; Gari, Mamdouh Abdullah; Butt, Nadeem Shafiq; Alghanmi, Faisal; Balubaid, Abdulaziz; Alzahrani, Ahmed; Hamouh, Safwan

2017-10-01

To investigate dietary habits, lifestyle pattern and obesity in young university students. This cross-sectional study was performed at the Rabigh campus of King Abdulaziz University, Jeddah, Saudi Arabia, from March to May 2016, and comprised healthy male students. A close-ended questionnaire was filled by all students about their dietary habits and lifestyle pattern and the lipid profile, blood glucose levels and body mass index was determined. The participants were selected by convenience sampling method. SPSS 21 was used for data analysis. Of the 116 participants, 34(29.3%) were obese, 34(29.3%) were overweight and 48(41.4%) had normal body mass index. Overall, 66(57%) participants were taking 3 to 4 fast food meals weekly and was also taking junk food at least once in a day. Also, 50(43%) participants were using soft/energy drink more than once per day. Besides, 82(70.7%) respondents were spending 3 to 4 hours daily in watching TV, using the Internet or PlayStation. Significant differences were observed for low-density lipoprotein and high-density lipoprotein cholesterol levels (p=0.02 and p=0.006, respectively) among overweight and obese subjects as compared to those having normal weight. The majority of the overweight and obese participants' had experienced shame or other uncomfortable feelings and had a negative impact on their activity (p<0.001). Dietary habits and lifestyle of the majority of the participants were not up to the mark and the obesity prevalence was common.

Study of dual radio frequency capacitively coupled plasma: an analytical treatment matched to an experiment

NASA Astrophysics Data System (ADS)

Saikia, P.; Bhuyan, H.; Escalona, M.; Favre, M.; Wyndham, E.; Maze, J.; Schulze, J.

2018-01-01

The behavior of a dual frequency capacitively coupled plasma (2f CCP) driven by 2.26 and 13.56 MHz radio frequency (rf) source is investigated using an approach that integrates a theoretical model and experimental data. The basis of the theoretical analysis is a time dependent dual frequency analytical sheath model that casts the relation between the instantaneous sheath potential and plasma parameters. The parameters used in the model are obtained by operating the 2f CCP experiment (2.26 MHz + 13.56 MHz) in argon at a working pressure of 50 mTorr. Experimentally measured plasma parameters such as the electron density, electron temperature, as well as the rf current density ratios are the inputs of the theoretical model. Subsequently, a convenient analytical solution for the output sheath potential and sheath thickness was derived. A comparison of the present numerical results is done with the results obtained in another 2f CCP experiment conducted by Semmler et al (2007 Plasma Sources Sci. Technol. 16 839). A good quantitative correspondence is obtained. The numerical solution shows the variation of sheath potential with the low and high frequency (HF) rf powers. In the low pressure plasma, the sheath potential is a qualitative measure of DC self-bias which in turn determines the ion energy. Thus, using this analytical model, the measured values of the DC self-bias as a function of low and HF rf powers are explained in detail.

Mass and Size Frequency Distribution of the Impact Debris from Disruption of Chondritic Meteorites

NASA Technical Reports Server (NTRS)

VanVeghten, T. W.; Flynn, G. J.; Durda, D. D.; Hart, S.; Asphaug, E.

2003-01-01

Since direct observation of the collision of asteroids in space is not always convenient for earthbound observers, we have undertaken simulations of these collisions using the NASA Ames Vertical Gun Range (AVGR). To simulate the collision of asteroids in space, and aluminum projectiles with velocities ranging from approx.1 to approx.6 km/sec were fired at 70g to approx.200 g fragments of chondritic meteorites. The target meteorite was placed in an evacuated chamber at the AVGR. Detectors, usually four, were set up around the target meteorite. These detectors consisted of aerogel and aluminum foil of varying thickness. The aerogel's purpose was to catch debris after the collision, and the aluminum foil.s purpose was to show the size of the debris particles through the size of the holes in the aluminum foil. Outside the chamber, a camera was set up to record high-speed film of the collision. This camera recorded at either 500 frames per second or 1000 frames per second. Three different types of targets were used for these tests. The first were actual meteorites, which varied in mineralogical composition, density, and porosity. The second type of target was a Hawaiian basalt, consisting of olivine phenocrysts in a porous matrix, which we thought might be similar to the chondritic meteorites, thus providing data for comparison. The final type was made out of Styrofoam. The Styrofoam was thought to simulate very low-density asteroids and comets.

Mechanisms of anode power deposition in a low pressure free burning arc

NASA Technical Reports Server (NTRS)

Soulas, George C.; Myers, Roger M.

1994-01-01

Anode power deposition is a dominant power loss mechanism for arc jets and MPD thrusters. In this study, a free burning arc experiment was operated at pressures and current densities similar to those in arc jets and MPD thrusters in an attempt to identify the physics controlling this loss mechanism. Use of a free burning arc allowed for the isolation of independent variables controlling anode power deposition and provided a convenient and flexible way to cover a broad range of currents, anode surface pressures, and applied magnetic field strengths and orientations using an argon gas. Test results showed that anode power deposition decreased with increasing anode surface pressure up to 6.7 Pa (0.05 torr) and then became insensitive to pressure. Anode power increased with increasing arc current while the electron number density near the anode surface increased linearity. Anode power also increased with increasing applied magnetic field strength due to an increasing anode fall voltage. Applied magnetic field orientation had an effect only at high currents and low anode surface pressures, where anode power decreased when applied field lines intercepted the anode surface. The results demonstrated that anode power deposition was dominated by the current carrying electrons and that the anode fall voltage was the largest contributor. Furthermore, the results showed that anode power deposition can be reduced by operating at increased anode pressures, reduced arc currents, and applied magnetic field strengths and with magnetic field lines intercepting the anode.

High cell density cultivation of a recombinant Escherichia coli strain expressing a 6-O-sulfotransferase for the production of bioengineered heparin.

PubMed

Zhang, J; Suflita, M; Fiaschetti, C M; Li, G; Li, L; Zhang, F; Dordick, J S; Linhardt, R J

2015-01-01

One of six heparin biosynthetic enzymes, cloned and expressed in Escherichia coli as a soluble fusion protein, requires large-scale preparation for use in the chemoenzymatic synthesis of heparin, an important anticoagulant drug. The 6-O-sulfotransferase isoform-3 (6-OST-3) can be conveniently prepared at mg/L levels in the laboratory by culturing E. coli on Luria-Bertani medium in shake flasks and inducing with isopropyl β-D-1-thiogalactopyranoside at an optical density of 0·6-0·8. The production of larger amounts of 6-OST-3 required fed-batch cultivation of E. coli in a stirred tank fermenter on medium containing an inexpensive carbon source, such as glucose or glycerol. The cultivation of E. coli on various carbon sources under different feeding schedules and induction strategies was examined. Conditions were established giving yields (5-20 mg g-cell-dry weight(-1)) of active 6-OST-3 with excellent productivity (2-5 mg l(-1) h(-1)). The production of 6-OST-3 in a fed-batch fermentation on an inexpensive carbon source has been demonstrated. The ability to scale-up the production of heparin biosynthetic enzymes, such as 6-OST-3, is critical for scaling-up the chemoenzymatic synthesis of heparin. The success of this project may someday lead to a commercially viable bioengineered heparin to replace the animal-sourced anticoagulant product currently on the market. © 2014 The Society for Applied Microbiology.

Influence of a mini-trampoline rebound exercise program on insulin resistance, lipid profile and central obesity in individuals with type 2 diabetes.

PubMed

Nuhu, Jibril M; Maharaj, Sonill S

2018-04-01

Exercises are important as an adjuvant for managing diabetes but due to fatigue and time constraints, individuals with diabetes may not engage in them. Jumping on a mini-trampoline referred to as rebound exercise is an aerobic activity used for exercise training benefits but only little research is available on its effects in diabetes. The purpose of this study was to determine the effect of mini-trampoline rebound exercise on insulin resistance, lipid profile and central obesity in type 2 diabetics. Sixty non-insulin dependent type 2 diabetics (median age: 39.0 years, median body mass index: 25.2 kg/m2) recruited using convenience sampling were randomized to a rebound exercise group (N.=30) or a control group (N.=30). The control group read health magazines or watched television while the rebound exercise group jumped on a mini-trampoline at moderate intensity for 30 minutes three times per week for 12 weeks. Postrebound exercise, significant improvements in insulin resistance, lipid profile and waist circumference were noted when compared to the control (P<0.05). The values for high density lipoprotein cholesterol increased with low density lipoprotein cholesterol, triglycerides, insulin resistance decreasing significantly from baseline (P<0.05). The findings suggest that mini-trampoline rebound exercise is beneficial for individuals with type 2 diabetes and can serve as a useful exercise approach in the management of cardiovascular risk in diabetes.

Frequency dispersion of sound propagation in Rouse polymer melts via generalized dynamic random phase approximation.

PubMed

Erukhimovich, I Ya; Kudryavtsev, Ya V

2003-08-01

An extended generalization of the dynamic random phase approximation (DRPA) for L-component polymer systems is presented. Unlike the original version of the DRPA, which relates the (LxL) matrices of the collective density-density time correlation functions and the corresponding susceptibilities of concentrated polymer systems to those of the tracer macromolecules and so-called broken-links system (BLS), our generalized DRPA solves this problem for the (5xL) x (5xL) matrices of the coupled susceptibilities and time correlation functions of the component number, kinetic energy and flux densities. The presented technique is used to study propagation of sound and dynamic form-factor in disentangled (Rouse) monodisperse homopolymer melt. The calculated ultrasonic velocity and absorption coefficient reveal substantial frequency dispersion. The relaxation time tau is proportional to the degree of polymerization N, which is N times less than the Rouse time and evidences strong dynamic screening because of interchain interaction. We discuss also some peculiarities of the Brillouin scattering in polymer melts. Besides, a new convenient expression for the dynamic structure function of the single Rouse chain in (q,p) representation is found.

Biomarkers of Cell Senescence Assessed by Imaging Cytometry

PubMed Central

Zhao, Hong; Darzynkiewicz, Zbigniew

2012-01-01

The characteristic features of senescent cells such as their “flattened” appearance, enlarged nuclei and low saturation density at the plateau phase of cell growth, can be conveniently measured by image-assisted d cytometry such as provided by the laser scanning cytometry (LSC). The “flattening” of senescent cells is reflected by the decline in local density of staining (intensity of maximal pixel) of DNA-associated fluorescence [4,6-diamidino-2- phenylindole (DAPI)] paralleled by an increase in nuclear size (area). Thus, the ratio of the maximal pixel of DAPI fluorescence per nucleus to the nuclear area provides a very sensitive morphometric biomarker of “depth” of senescence, which progressively declines during induction of senescence. Also recorded is cellular DNA content revealing cell cycle phase, as well as the saturation cell density at plateau phase of growth, which is dramatically decreased in cultures of senescent cells. Concurrent immunocytochemical analysis of expression of p21WAF1, p16INK4a or p27KIP1 cyclin kinase inhibitor provides additional markers of senescence. These biomarker indices can be expressed in quantitative terms (“senescence indices”) as a fraction of the same markers of the exponentially growing cells in control cultures. PMID:23296652

Molecular Design of Antifouling Polymer Brushes Using Sequence-Specific Peptoids.

PubMed

Lau, King Hang Aaron; Sileika, Tadas S; Park, Sung Hyun; Sousa, Ana Maria Leal; Burch, Patrick; Szleifer, Igal; Messersmith, Phillip B

2015-01-07

Material systems that can be used to flexibly and precisely define the chemical nature and molecular arrangement of a surface would be invaluable for the control of complex biointerfacial interactions. For example, progress in antifouling polymer biointerfaces that prevent non-specific protein adsorption and cell attachment, which can significantly improve the performance of an array of biomedical and industrial applications, is hampered by a lack of chemical models to identify the molecular features conferring their properties. Poly(N-substituted glycine) "peptoids" are peptidomimetic polymers that can be conveniently synthesized with specific monomer sequences and chain lengths, and are presented as a versatile platform for investigating the molecular design of antifouling polymer brushes. Zwitterionic antifouling polymer brushes have captured significant recent attention, and a targeted library of zwitterionic peptoid brushes with a different charge densities, hydration, separations between charged groups, chain lengths, and grafted chain densities, is quantitatively evaluated for their antifouling properties through a range of protein adsorption and cell attachment assays. Specific zwitterionic brush designs were found to give rise to distinct but subtle differences in properties. The results also point to the dominant roles of the grafted chain density and chain length in determining the performance of antifouling polymer brushes.

Twist-averaged boundary conditions for nuclear pasta Hartree-Fock calculations

DOE PAGES

Schuetrumpf, B.; Nazarewicz, W.

2015-10-21

Nuclear pasta phases, present in the inner crust of neutron stars, are associated with nucleonic matter at subsaturation densities arranged in regular shapes. Those complex phases, residing in a layer which is approximately 100-m thick, impact many features of neutron stars. Theoretical quantum-mechanical simulations of nuclear pasta are usually carried out in finite three-dimensional boxes assuming periodic boundary conditions. The resulting solutions are affected by spurious finite-size effects. To remove spurious finite-size effects, it is convenient to employ twist-averaged boundary conditions (TABC) used in condensed matter, nuclear matter, and lattice quantum chromodynamics applications. In this work, we study the effectivenessmore » of TABC in the context of pasta phase simulations within nuclear density functional theory. We demonstrated that by applying TABC reliable results can be obtained from calculations performed in relatively small volumes. By studying various contributions to the total energy, we gain insights into pasta phases in mid-density range. Future applications will include the TABC extension of the adaptive multiresolution 3D Hartree-Fock solver and Hartree-Fock-Bogoliubov TABC applications to superfluid pasta phases and complex nucleonic topologies as in fission.« less

Longitudinal changes in white matter disease and cognition in the first year of the Alzheimer disease neuroimaging initiative.

PubMed

Carmichael, Owen; Schwarz, Christopher; Drucker, David; Fletcher, Evan; Harvey, Danielle; Beckett, Laurel; Jack, Clifford R; Weiner, Michael; DeCarli, Charles

2010-11-01

To evaluate relationships between magnetic resonance imaging (MRI)-based measures of white matter hyperintensities (WMHs), measured at baseline and longitudinally, and 1-year cognitive decline using a large convenience sample in a clinical trial design with a relatively mild profile of cardiovascular risk factors. Convenience sample in a clinical trial design. A total of 804 participants in the Alzheimer Disease Neuroimaging Initiative who received MRI scans, cognitive testing, and clinical evaluations at baseline, 6-month follow-up, and 12-month follow-up visits. For each scan, WMHs were detected automatically on coregistered sets of T1, proton density, and T2 MRI images using a validated method. Mixed-effects regression models evaluated relationships between risk factors for WMHs, WMH volume, and change in outcome measures including Mini-Mental State Examination (MMSE), Alzheimer Disease Assessment Scale-Cognitive Subscale (ADAS-Cog), and Clinical Dementia Rating Scale sum of boxes scores. Covariates in these models included race, sex, years of education, age, apolipoprotein E genotype, baseline clinical diagnosis (cognitively normal, mild cognitive impairment, or Alzheimer disease), cardiovascular risk score, and MRI-based hippocampal and brain volumes. Higher baseline WMH volume was associated with greater subsequent 1-year increase in ADAS-Cog and decrease in MMSE scores. Greater WMH volume at follow-up was associated with greater ADAS-Cog and lower MMSE scores at follow-up. Higher baseline age and cardiovascular risk score and more impaired baseline clinical diagnosis were associated with higher baseline WMH volume. White matter hyperintensity volume predicts 1-year cognitive decline in a relatively healthy convenience sample that was similar to clinical trial samples, and therefore should be considered as a covariate of interest at baseline and longitudinally in future AD treatment trials.

Preparation, glass forming ability, crystallization and deformation of (zirconium, hafnium)-copper-nickel-aluminum-titanium-based bulk metallic glasses

NASA Astrophysics Data System (ADS)

Gu, Xiaofeng

Multicomponent Zr-based bulk metallic glasses are the most promising metallic glass forming systems. They exhibit great glass forming ability and fascinating mechanical properties, and thus are considered as potential structural materials. One potential application is that they could be replacements of the depleted uranium for making kinetic energy armor-piercing projectiles, but the density of existing Zr-based alloys is too low for this application. Based on the chemical and crystallographic similarities between Zr and Hf, we have developed two series of bulk metallic glasses with compositions of (HfxZr1-x) 52.5Cu17.9Ni14.6Al10Ti5 and (HfxZr1-x) 57Cu20Ni8Al10Ti5 ( x = 0--1) by gradually replacing Zr by Hf. Remarkably increased density and improved mechanical properties have been achieved in these alloys. In these glasses, Hf and Zr play an interchangeable role in determining the short range order. Although the glass forming ability decreases continuously with Hf addition, most of these alloys remain bulk glass-forming. Recently, nanocomposites produced from bulk metallic glasses have attracted wide attention due to improved mechanical properties. However, their crystalline microstructure (the grain size and the crystalline volume fraction) has to be optimized. We have investigated crystallization of (Zr, Hf)-based bulk metallic glasses, including the composition dependence of crystallization paths and crystallization mechanisms. Our results indicate that the formation of high number density nanocomposites from bulk metallic glasses can be attributed to easy nucleation and slowing-down growth processes, while the multistage crystallization behavior makes it more convenient to control the microstructure evolution. Metallic glasses are known to exhibit unique plastic deformation behavior. At low temperature and high stress, plastic flow is localized in narrow shear bands. Macroscopic investigations of shear bands (e.g., chemical etching) suggest that the internal structure of shear bands is different from that of undeformed surroundings, but the direct structural characterization of shear bands down to the atomic level has been lacking. In this work, we have used transmission electron microscopy to explore the structural and chemical changes inside the shear bands. Nanometer-scale defects (void-like and high density regions) have been identified as a result of plastic deformation. It is these defects that distinguish shear bands from undeformed regions. Processes occurring in an active shear band and after stress removal are analogous to a thermally activated relaxation except that the relaxation time is much shorter in the former case.

Short-Term Effect of Convenience Meal Intake on Glycemic Response and Satiety among Healthy College Students in South Korea

PubMed Central

Jang, Eunji; Lee, Jeunghyun; Lee, Sukyeong

2017-01-01

This study examined the effect of convenience meals purchased at convenience stores on glycemic response and satiety in healthy college students. A total of 9 non-obese volunteers (4 males and 5 females) aged 20 to 24 years participated in this study. On 3 separate days, participants consumed a standard diet (cooked rice and side dishes), type 1 convenience meal (kimbap and instant ramen), and type 2 convenience meal (sweet bread and flavored milk). Capillary blood-glucose response and satiety were measured every 30 minutes for 2 hours after consuming the 3 different test meals. Although mean fasting glucose levels were not different, glucose levels at 30 minutes and 120 minutes after the type 1 convenience meal intake were significantly higher than those in the standard meal (p < 0.05, p < 0.01). Total glucose response was higher after consumption of the type 1 convenience meal, followed by the type 2 convenience meal and standard meal (p < 0.05). Though the type 2 convenience meal contained higher calorie than the other meals, satiety of the type 2 convenience meal was lowest at 30 minutes and 60 minutes after consumption (p < 0.01, p < 0.05). This pilot study suggests that convenience meals may increase glycemic response or induce higher calorie intake with low satiety compared with nutritionally balanced Korean style meal. PMID:28770184

Short-Term Effect of Convenience Meal Intake on Glycemic Response and Satiety among Healthy College Students in South Korea.

PubMed

Jang, Eunji; Lee, Jeunghyun; Lee, Sukyeong; Kim, Mi-Hyun

2017-07-01

This study examined the effect of convenience meals purchased at convenience stores on glycemic response and satiety in healthy college students. A total of 9 non-obese volunteers (4 males and 5 females) aged 20 to 24 years participated in this study. On 3 separate days, participants consumed a standard diet (cooked rice and side dishes), type 1 convenience meal (kimbap and instant ramen), and type 2 convenience meal (sweet bread and flavored milk). Capillary blood-glucose response and satiety were measured every 30 minutes for 2 hours after consuming the 3 different test meals. Although mean fasting glucose levels were not different, glucose levels at 30 minutes and 120 minutes after the type 1 convenience meal intake were significantly higher than those in the standard meal (p < 0.05, p < 0.01). Total glucose response was higher after consumption of the type 1 convenience meal, followed by the type 2 convenience meal and standard meal (p < 0.05). Though the type 2 convenience meal contained higher calorie than the other meals, satiety of the type 2 convenience meal was lowest at 30 minutes and 60 minutes after consumption (p < 0.01, p < 0.05). This pilot study suggests that convenience meals may increase glycemic response or induce higher calorie intake with low satiety compared with nutritionally balanced Korean style meal.

Managing routine food choices in UK families: the role of convenience consumption.

PubMed

Carrigan, Marylyn; Szmigin, Isabelle; Leek, Sheena

2006-11-01

The paper explores the meaning of convenience food for UK mothers, investigating the relationship between mothers and their families' food. The study examines the role of convenience food within the food strategies of contemporary UK families, and aims to elicit consumption meanings in the broader social context of family relationships with food, their rituals, routines and conventions. The findings reveal convenience has multiple meanings for UK women, and that convenience food has been incorporated into reinterpreted versions of homemade and "proper" meals. A hierarchy of acceptable convenience food is presented by the mothers, who tackle complex and conflicting family routines by introducing convenience solutions. Rules of eating have evolved, yet remain essentially controlled by the mother in terms of nutrition. While the traditional model of "proper" food remains aspirational, contemporary family lifestyles require that convenience food become part of the equation.

MISR CMV New Data

Atmospheric Science Data Center

2016-10-31

Cloud Motion Vector (CMV) Product The MISR Level 3 Products are global or ... field campaigns at daily and monthly time scales. The CMV product provides conveniently organized, high quality retrievals of cloud ...

One-click scanning of large-size documents using mobile phone camera

NASA Astrophysics Data System (ADS)

Liu, Sijiang; Jiang, Bo; Yang, Yuanjie

2016-07-01

Currently mobile apps for document scanning do not provide convenient operations to tackle large-size documents. In this paper, we present a one-click scanning approach for large-size documents using mobile phone camera. After capturing a continuous video of documents, our approach automatically extracts several key frames by optical flow analysis. Then based on key frames, a mobile GPU based image stitching method is adopted to generate a completed document image with high details. There are no extra manual intervention in the process and experimental results show that our app performs well, showing convenience and practicability for daily life.

46 CFR 10.107 - Definitions in subchapter B.

Code of Federal Regulations, 2014 CFR

2014-10-01

... communications by a convenient, reliable means, such as a predetermined working frequency over a handheld radio... place in the same possession, and passes outside the line dividing inland waters from the high seas; or... inland waters from the high seas and navigates on the high seas, and then returns to the same port or...

Community Colleges Put Their Best Faces Forward for Students of Tomorrow.

ERIC Educational Resources Information Center

Aslanian, Carol B.

1998-01-01

Suggests a positive future for community colleges as the educational needs of high school students, business organizations, graduate students, and diverse others stimulate enrollment. Predicts high demand for community colleges for reasons including convenience, quality of instruction, and flexibility in scheduling. (VWC)

[Evaluation of three methods for forensic diatom test].

PubMed

Wang, Yuzhong; Zhao, Jian; Li, Peng; Hu, Sunlin; Wang, Huipin; Wang, Huijun; Liu, Chao

2015-03-01

To compare the efficacy of three methods for forensic diatom test, namely strong acid digestion-centrifuge enrichment-light microscopy (SD-CE-LM), microwave digestion-membrane filtration-automated scanning electron microscopy (MD-ME-SEM), and microwave digestion-membrane filtration-light microscopy (MD-MF-LM). Sixty samples were randomly divided into 3 groups for diatom test using three methods, and the sample preparation time, degree of digestion and recovery rate of diatoms were compared. The sample preparation time was the shortest with MD-MF-LM and the longest with SD-CE-LM (P<0.05). MD-ME-SEM and MD-MF-LM allowed more thorough tissue digestion than SD-CE-LM. MD-ME-SEM resulted in the highest total recovery rate of diatom, followed by MD-MF-LM and then by SD-CE-LM (P<0.05); the recover rate of different diatom species was the highest with MD-ME-SEM, followed by MD-MF-LM and SD-CE-LM (P<0.05). SD-CE-LM has a low recovery rate of diatoms especially for those with lengths shorter than 40 µm or densities less than 1/5. With a high recovery rate and accuracy in diatom test, MD-ME-SEM is suitable for diagnosis of suspected drowning cases. MD-MF-LM is highly efficient, sensitive and convenient for forensic diatom test.

Measuring charge carrier diffusion in coupled colloidal quantum dot solids.

PubMed

Zhitomirsky, David; Voznyy, Oleksandr; Hoogland, Sjoerd; Sargent, Edward H

2013-06-25

Colloidal quantum dots (CQDs) are attractive materials for inexpensive, room-temperature-, and solution-processed optoelectronic devices. A high carrier diffusion length is desirable for many CQD device applications. In this work we develop two new experimental methods to investigate charge carrier diffusion in coupled CQD solids under charge-neutral, i.e., undepleted, conditions. The methods take advantage of the quantum-size-effect tunability of our materials, utilizing a smaller-bandgap population of quantum dots as a reporter system. We develop analytical models of diffusion in 1D and 3D structures that allow direct extraction of diffusion length from convenient parametric plots and purely optical measurements. We measure several CQD solids fabricated using a number of distinct methods and having significantly different doping and surface ligand treatments. We find that CQD materials recently reported to achieve a certified power conversion efficiency of 7% with hybrid organic-inorganic passivation have a diffusion length of 80 ± 10 nm. The model further allows us to extract the lifetime, trap density, mobility, and diffusion coefficient independently in each material system. This work will facilitate further progress in extending the diffusion length, ultimately leading to high-quality CQD solid semiconducting materials and improved CQD optoelectronic devices, including CQD solar cells.

Enhancement of recombinant BmK AngM1 production in Pichia pastoris by regulating gene dosage, co-expressing with chaperones and fermenting in fed-batch mode.

PubMed

Wang, Qing-Hua; Liang, Lan; Liu, Wan-Cang; Gong, Ting; Chen, Jing-Jing; Hou, Qi; Yang, Jin-Ling; Zhu, Ping

2017-06-01

The scorpion peptide BmK AngM1 was reported to exhibit evident analgesic effect, but its yield by extraction from scorpion venom limits the research and application. The heterologous expression of BmK AngM1 was achieved in Pichia pastoris in our previous study. In order to realize high-level expression of recombinant BmK AngM1 (rBmK AngM1), the gene dosage of BmK AngM1 was optimized in engineered strains. The yield of rBmK AngM1 in the four-copy strain reached up to 100 mg/L, which was further enhanced to 190 mg/L by co-expressing with chaperones of PDI, BiP, and HAC1. Moreover, the yield of rBmK AngM1 was up to 1200 mg/L by high-density fermentation in 10 L fermenter. Finally, 360 mg rBmK AngM1 was purified from 1 L cultures by a two-step purification method. The efficient and convenient techniques presented in this study could facilitate further scale-up for industrial production of rBmK AngM1.

COMBINED MODELING OF ACCELERATION, TRANSPORT, AND HYDRODYNAMIC RESPONSE IN SOLAR FLARES. I. THE NUMERICAL MODEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Wei; Petrosian, Vahe; Mariska, John T.

2009-09-10

Acceleration and transport of high-energy particles and fluid dynamics of atmospheric plasma are interrelated aspects of solar flares, but for convenience and simplicity they were artificially separated in the past. We present here self-consistently combined Fokker-Planck modeling of particles and hydrodynamic simulation of flare plasma. Energetic electrons are modeled with the Stanford unified code of acceleration, transport, and radiation, while plasma is modeled with the Naval Research Laboratory flux tube code. We calculated the collisional heating rate directly from the particle transport code, which is more accurate than those in previous studies based on approximate analytical solutions. We repeated themore » simulation of Mariska et al. with an injection of power law, downward-beamed electrons using the new heating rate. For this case, a {approx}10% difference was found from their old result. We also used a more realistic spectrum of injected electrons provided by the stochastic acceleration model, which has a smooth transition from a quasi-thermal background at low energies to a nonthermal tail at high energies. The inclusion of low-energy electrons results in relatively more heating in the corona (versus chromosphere) and thus a larger downward heat conduction flux. The interplay of electron heating, conduction, and radiative loss leads to stronger chromospheric evaporation than obtained in previous studies, which had a deficit in low-energy electrons due to an arbitrarily assumed low-energy cutoff. The energy and spatial distributions of energetic electrons and bremsstrahlung photons bear signatures of the changing density distribution caused by chromospheric evaporation. In particular, the density jump at the evaporation front gives rise to enhanced emission, which, in principle, can be imaged by X-ray telescopes. This model can be applied to investigate a variety of high-energy processes in solar, space, and astrophysical plasmas.« less

Changes in tobacco industry advertising around high schools in Greece following an outdoor advertising ban: a follow-up study.

PubMed

Vardavas, Constantine I; Girvalaki, Charis; Lazuras, Lambros; Triantafylli, Danai; Lionis, Christos; Connolly, Gregory N; Behrakis, Panagiotis

2013-09-01

As tobacco advertising bans are enacted in accordance with the Framework Convention on Tobacco Control, it is essential to assess enforcement and how the industry may circumvent such measures. During this longitudinal study, we compared the characteristics of points-of-sale (POS) advertising within 300 m of all high schools in Heraklion, Greece before (n=101 POS and 44 billboards in 2007) and after (n=106 POS in 2011) an outdoor advertising ban was implemented in 2009. Cigarette advertisements in all retailers near all high schools were assessed. Following the ban, tobacco industry billboards around schools were eradicated (from 44 to 0). The proportion of POS that had external advertisements dropped from 98% to 66% (p<0.001), more so in regulated convenience stores (from 97% to 35%, p<0.001) than in kiosks (98% to 92%, p=0.192), which were exempt from the ban. The proportion of convenience stores that had advertisements on the door (79.5% to 20.4%, p<0.001), ads that could be seen from the street (92.3% to 22.4%, p<0.001) or illuminated exterior ads (46.2% to 10.2%, p<0.001) was also significantly reduced. Overall, the average number of exterior advertisements per POS fell from 7.4 to 3.9 (p<0.05). This reduction was noted in regulated convenience stores (4.8±3.0 vs 0.9±2.1, p<0.001) and in unregulated kiosks (9.0±6.7 vs 6.5±4.5, p=0.019). The outdoor advertising restriction in Greece has led to a reduced number of tobacco advertisements per POS, and the eradication of billboard advertising. Nevertheless, there is a need to regulate kiosks, which were identified as a key vector for tobacco advertising, and to increase compliance among regulated convenience stores.

Indirect Field Measurement of Wine-Grape Vineyard Canopy Leaf Area Index

NASA Technical Reports Server (NTRS)

Johnson, Lee F.; Pierce, Lars L.; Skiles, J. W. (Technical Monitor)

2002-01-01

Leaf area index (LAI) indirect measurements were made at 12 study plots in California's Napa Valley commercial wine-grape vineyards with a LI-COR LI-2000 Plant Canopy Analyzer (PCA). The plots encompassed different trellis systems, biological varieties, and planting densities. LAI ranged from 0.5 - 2.25 sq m leaf area/ sq m ground area according to direct (defoliation) measurements. Indirect LAI reported by the PCA was significantly related to direct LAI (r(exp 2) = 0.78, p less than 001). However, the PCA tended to underestimate direct LAI by about a factor of two. Narrowing the instrument's conical field of view from 148 deg to 56 deg served to increase readings by approximately 30%. The PCA offers a convenient way to discern relative differences in vineyard canopy density. Calibration by direct measurement (defoliation) is recommended in cases where absolute LAI is desired. Calibration equations provided herein may be inverted to retrieve actual vineyard LAI from PCA readings.

Scaling laws for the mechanics of loose and cohesive granular materials based on Baxter's sticky hard spheres

NASA Astrophysics Data System (ADS)

Gaume, Johan; Löwe, Henning; Tan, Shurun; Tsang, Leung

2017-09-01

We have conducted discrete element simulations (pfc3d) of very loose, cohesive, granular assemblies with initial configurations which are drawn from Baxter's sticky hard sphere (SHS) ensemble. The SHS model is employed as a promising auxiliary means to independently control the coordination number zc of cohesive contacts and particle volume fraction ϕ of the initial states. We focus on discerning the role of zc and ϕ for the elastic modulus, failure strength, and the plastic consolidation line under quasistatic, uniaxial compression. We find scaling behavior of the modulus and the strength, which both scale with the cohesive contact density νc=zcϕ of the initial state according to a power law. In contrast, the behavior of the plastic consolidation curve is shown to be independent of the initial conditions. Our results show the primary control of the initial contact density on the mechanics of cohesive granular materials for small deformations, which can be conveniently, but not exclusively explored within the SHS-based assembling procedure.

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. In this picture, the beads are trapped in the injection port shortly after injection. Swirls of beads indicate, event to the naked eye, the contents of the TCM are not fully mixed. The beads are similar in size and density to human lymphoid cells. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light

Attitudes to animal euthanasia do not correlate with acceptance of human euthanasia or suicide.

PubMed

Ogden, U; Kinnison, T; May, S A

2012-08-18

Several reasons have been suggested for the elevated risk of suicide experienced by those in the veterinary profession. The current study aimed to investigate possible links between veterinarians' attitudes to 'convenience' or non-justified animal euthanasia and attitudes towards human euthanasia and suicide. Veterinary students and graduates had a negative attitude towards convenience animal euthanasia, but their attitudes changed over time (pre-clinical studies, clinical studies and recently graduated). A greater tolerance to euthanasia was displayed in the later years of study and post qualification - primarily by males. Attitudes towards both human euthanasia and suicide, however, remained stable over time and indicated on average a neutral stance. No correlations were found between attitudes to convenience euthanasia and either human euthanasia or suicide, suggesting a tolerance to convenience euthanasia of animals does not lead to desensitisation in valuing human life and a changed attitude to human euthanasia or suicide, or vice versa. Attitudes to human euthanasia and suicide were predictably correlated, perhaps suggesting an overarching attitude towards control over human death. The results of the current study throw into question the argument that it is the changes in attitudes to animal life that affect veterinarian's attitudes to human life and contribute to the high suicide rate.

Simplified, rapid, and inexpensive estimation of water primary productivity based on chlorophyll fluorescence parameter Fo.

PubMed

Chen, Hui; Zhou, Wei; Chen, Weixian; Xie, Wei; Jiang, Liping; Liang, Qinlang; Huang, Mingjun; Wu, Zongwen; Wang, Qiang

2017-04-01

Primary productivity in water environment relies on the photosynthetic production of microalgae. Chlorophyll fluorescence is widely used to detect the growth status and photosynthetic efficiency of microalgae. In this study, a method was established to determine the Chl a content, cell density of microalgae, and water primary productivity by measuring chlorophyll fluorescence parameter Fo. A significant linear relationship between chlorophyll fluorescence parameter Fo and Chl a content of microalgae, as well as between Fo and cell density, was observed under pure-culture conditions. Furthermore, water samples collected from natural aquaculture ponds were used to validate the correlation between Fo and water primary productivity, which is closely related to Chl a content in water. Thus, for a given pure culture of microalgae or phytoplankton (mainly microalgae) in aquaculture ponds or other natural ponds for which the relationship between the Fo value and Chl a content or cell density could be established, Chl a content or cell density could be determined by measuring the Fo value, thereby making it possible to calculate the water primary productivity. It is believed that this method can provide a convenient way of efficiently estimating the primary productivity in natural aquaculture ponds and bringing economic value in limnetic ecology assessment, as well as in algal bloom monitoring. Copyright © 2017 Elsevier GmbH. All rights reserved.

The Food Retail Environment in School Neighborhoods and its Relation to Lunchtime Eating Behaviors in Youth from Three Countries

PubMed Central

Héroux, Mariane; Iannotti, Ronald J.; Currie, Dorothy; Pickett, William; Janssen, Ian

2012-01-01

This study examined the relation between the chain food retail environment surrounding schools, youths’ lunchtime eating behavior, and youths’ obesity levels across three countries. Participants consisted of 26,778 students 13–15 years old from 687 schools across Canada, Scotland and the US. The density of convenience stores, chain fast food restaurants, and chain cafés within 1 km of each school was measured. Lunchtime eating behaviors, weight, and height were self-reported. Although the density of chain food retailers was highest in the US, fewer American students (2.6%) routinely ate their lunch at a food retailer during the school week than did Canadian (7.7%) and Scottish (43.7%) students. The density of chain food retailers was associated with eating lunch at a food retailer in Canada only whereby students attending schools with 1–2, 3–4, and 5+ chain food retailers within 1 km from their schools were 1.39 (95% CI: 0.84–2.29), 1.87 (95% CI: 1.10–3.20), and 2.50 (95% CI: 1.56–4.01) times more likely to eat at a chain food retailer compared to students attending schools with no nearby chain food retailers. No associations were found between chain food retailer density and obesity. PMID:23041489

40 CFR 35.6760 - Enforcement and termination for convenience.

Code of Federal Regulations, 2010 CFR

2010-07-01

... convenience. 35.6760 Section 35.6760 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND... Enforcement and termination for convenience. The recipient must comply with all terms and conditions in the... termination for convenience described in 40 CFR 31.43 and 31.44. ...

Acoustic travel time gauges for in-situ determination of pressure and temperature in multi-anvil apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Xuebing; Chen, Ting; Qi, Xintong

In this study, we developed a new method for in-situ pressure determination in multi-anvil, high-pressure apparatus using an acoustic travel time approach within the framework of acoustoelasticity. The ultrasonic travel times of polycrystalline Al{sub 2}O{sub 3} were calibrated against NaCl pressure scale up to 15 GPa and 900 °C in a Kawai-type double-stage multi-anvil apparatus in conjunction with synchrotron X-radiation, thereby providing a convenient and reliable gauge for pressure determination at ambient and high temperatures. The pressures derived from this new travel time method are in excellent agreement with those from the fixed-point methods. Application of this new pressure gauge in anmore » offline experiment revealed a remarkable agreement of the densities of coesite with those from the previous single crystal compression studies under hydrostatic conditions, thus providing strong validation for the current travel time pressure scale. The travel time approach not only can be used for continuous in-situ pressure determination at room temperature, high temperatures, during compression and decompression, but also bears a unique capability that none of the previous scales can deliver, i.e., simultaneous pressure and temperature determination with a high accuracy (±0.16 GPa in pressure and ±17 °C in temperature). Therefore, the new in-situ Al{sub 2}O{sub 3} pressure gauge is expected to enable new and expanded opportunities for offline laboratory studies of solid and liquid materials under high pressure and high temperature in multi-anvil apparatus.« less

High-performance magnetic carbon materials in dye removal from aqueous solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Xiaoming, E-mail: dawn1026@163.com; Zhang, Yu; Dai, Yuan

To obtain a novel adsorbent with excellent adsorption capacity and convenient magnetic separation property, magnetic activated semi-coke was prepared by KOH activation method and further modified by FeCl{sub 3}. The surface morphology, physical structure, chemical properties and textural characteristics of unmodified semi-coke, KOH-modified semi-coke and magnetic activated semi-coke were characterized by scanning electron microscopy, X-ray powder diffraction, N{sub 2} adsorption-desorption measurement, and electronic differential system. The adsorption characteristics of the magnetic activated semi-coke were explored for the removal of methyl orang (MO), methylene blue (MB), congo red (CR), acid fuchsin (AF), and rhodamine B (RB) from aqueous solution. The effectsmore » of adsorption parameters, including adsorbent dosage, pH and contact time, were investigated by comparing the adsorption properties of the magnetic activated semi-coke to RB. The result showed that the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. The adsorption experiment data indicated that the pseudosecond order model and the Langmuir model could well explain the adsorption processes of RB on the magnetic activated semi-coke, and the maximum adsorption capacity (q{sub m}) was 526.32 mg/g. The values of thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption process depended on the temperature of the aqueous phase, and it was spontaneous and exothermic in nature. As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. - Graphical abstract: As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. Display Omitted.« less

Parental perceived neighborhood attributes: associations with active transport and physical activity among 10-12 year old children and the mediating role of independent mobility.

PubMed

De Meester, Femke; Van Dyck, Delfien; De Bourdeaudhuij, Ilse; Cardon, Greet

2014-06-20

During the last decades, the use of active travel modes declined in all age groups. Childhood is a critical time to establish lifelong healthy patterns. To develop effective interventions in this age group, insight in the correlates of health behaviors and the possible mediating factors is necessary. Among children, the role of parents may not be overlooked. Therefore, this study aimed to examine the associations of parental perceptions of neighborhood environmental attributes with active transport and total physical activity in 10-12 year old Belgian boys and girls. Furthermore, this study examined the potential mediating effect of independent mobility on these associations. In the present study, 736 10-12 year old children and their parents from 44 elementary schools in Flanders, Belgium, participated. The children were asked to wear an activity monitor and to fill in a survey questioning demographic factors and the Flemish Physical Activity Questionnaire. The parents filled in a survey concerning demographic factors, the child's level of independent mobility and environmental perceptions (Neighborhood Environmental Walkability Scale). Overall, boys reported more active transport when parents perceived more land use mix diversity, shorter distances to school, good land use mix access, higher residential density and less pleasing neighborhood aesthetics. Higher total physical activity levels were reported when parents perceived shorter distances to school and availability of walking/cycling infrastructure. None of the associations was mediated by independent mobility in boys. Girls reported more active transport when parents perceived higher residential density, more land use mix diversity, shorter distances to school, good land use mix access, available walking/cycling infrastructure and convenient recreational facilities. Girls reported higher total physical activity levels when parents perceived high residential density, good land use mix access, well-maintained and high quality walking/cycling infrastructures and more traffic safety. Independent mobility was found to be an important mediator of these associations in girls. Neighborhood environmental interventions to increase children's active transport and physical activity can be effective when combined with awareness raising programs for parents. Furthermore, among girls encouraging independent mobility may contribute to behavior change.

Improving robustness against electrode shift of high density EMG for myoelectric control through common spatial patterns.

PubMed

Pan, Lizhi; Zhang, Dingguo; Jiang, Ning; Sheng, Xinjun; Zhu, Xiangyang

2015-12-02

Most prosthetic myoelectric control studies have concentrated on low density (less than 16 electrodes, LD) electromyography (EMG) signals, due to its better clinical applicability and low computation complexity compared with high density (more than 16 electrodes, HD) EMG signals. Since HD EMG electrodes have been developed more conveniently to wear with respect to the previous versions recently, HD EMG signals become an alternative for myoelectric prostheses. The electrode shift, which may occur during repositioning or donning/doffing of the prosthetic socket, is one of the main reasons for degradation in classification accuracy (CA). HD EMG signals acquired from the forearm of the subjects were used for pattern recognition-based myoelectric control in this study. Multiclass common spatial patterns (CSP) with two types of schemes, namely one versus one (CSP-OvO) and one versus rest (CSP-OvR), were used for feature extraction to improve the robustness against electrode shift for myoelectric control. Shift transversal (ST1 and ST2) and longitudinal (SL1 and SL2) to the direction of the muscle fibers were taken into consideration. We tested nine intact-limb subjects for eleven hand and wrist motions. The CSP features (CSP-OvO and CSP-OvR) were compared with three commonly used features, namely time-domain (TD) features, time-domain autoregressive (TDAR) features and variogram (Variog) features. Compared with the TD features, the CSP features significantly improved the CA over 10 % in all shift configurations (ST1, ST2, SL1 and SL2). Compared with the TDAR features, a. the CSP-OvO feature significantly improved the average CA over 5 % in all shift configurations; b. the CSP-OvR feature significantly improved the average CA in shift configurations ST1, SL1 and SL2. Compared with the Variog features, the CSP features significantly improved the average CA in longitudinal shift configurations (SL1 and SL2). The results demonstrated that the CSP features significantly improved the robustness against electrode shift for myoelectric control with respect to the commonly used features.

Public attitudes toward stuttering in Turkey: probability versus convenience sampling.

PubMed

Ozdemir, R Sertan; St Louis, Kenneth O; Topbaş, Seyhun

2011-12-01

A Turkish translation of the Public Opinion Survey of Human Attributes-Stuttering (POSHA-S) was used to compare probability versus convenience sampling to measure public attitudes toward stuttering. A convenience sample of adults in Eskişehir, Turkey was compared with two replicates of a school-based, probability cluster sampling scheme. The two replicates of the probability sampling scheme yielded similar demographic samples, both of which were different from the convenience sample. Components of subscores on the POSHA-S were significantly different in more than half of the comparisons between convenience and probability samples, indicating important differences in public attitudes. If POSHA-S users intend to generalize to specific geographic areas, results of this study indicate that probability sampling is a better research strategy than convenience sampling. The reader will be able to: (1) discuss the difference between convenience sampling and probability sampling; (2) describe a school-based probability sampling scheme; and (3) describe differences in POSHA-S results from convenience sampling versus probability sampling. Copyright © 2011 Elsevier Inc. All rights reserved.

Reframing convenience food.

PubMed

Jackson, Peter; Viehoff, Valerie

2016-03-01

This paper provides a critical review of recent research on the consumption of 'convenience' food, highlighting the contested nature of the term and exploring its implications for public health and environmental sustainability. It distinguishes between convenience food in general and particular types of convenience food, such as ready-meals, tracing the structure and growth of the market for such foods with a particular emphasis on the UK which currently has the highest rate of ready-meal consumption in Europe. Having established the definitional complexities of the term, the paper presents the evidence from a systematic review of the literature, highlighting the significance of convenience food in time-saving and time-shifting, the importance of recent changes in domestic labour and family life, and the way the consumption of convenience food is frequently moralized. The paper shows how current debates about convenience food are part of a longer discursive history about food, health and nutrition. It discusses current levels of public understanding about the links between convenience food, environmental sustainability and food waste. The paper concludes by making a case for understanding the consumption of convenience food in terms of everyday social practices, emphasising its habitual and routine character. Copyright © 2015 Elsevier Ltd. All rights reserved.

Robotic voltammetry with carbon nanotube-based sensors: a superb blend for convenient high-quality antimicrobial trace analysis.

PubMed

Theanponkrang, Somjai; Suginta, Wipa; Weingart, Helge; Winterhalter, Mathias; Schulte, Albert

2015-01-01

A new automated pharmacoanalytical technique for convenient quantification of redox-active antibiotics has been established by combining the benefits of a carbon nanotube (CNT) sensor modification with electrocatalytic activity for analyte detection with the merits of a robotic electrochemical device that is capable of sequential nonmanual sample measurements in 24-well microtiter plates. Norfloxacin (NFX) and ciprofloxacin (CFX), two standard fluoroquinolone antibiotics, were used in automated calibration measurements by differential pulse voltammetry (DPV) and accomplished were linear ranges of 1-10 μM and 2-100 μM for NFX and CFX, respectively. The lowest detectable levels were estimated to be 0.3±0.1 μM (n=7) for NFX and 1.6±0.1 μM (n=7) for CFX. In standard solutions or tablet samples of known content, both analytes could be quantified with the robotic DPV microtiter plate assay, with recoveries within ±4% of 100%. And recoveries were as good when NFX was evaluated in human serum samples with added NFX. The use of simple instrumentation, convenience in execution, and high effectiveness in analyte quantitation suggest the merger between automated microtiter plate voltammetry and CNT-supported electrochemical drug detection as a novel methodology for antibiotic testing in pharmaceutical and clinical research and quality control laboratories.

Freshness maintenance of cherries ready for consumption using convenient, microperforated, bio-based packaging.

PubMed

Koutsimanis, Georgios; Harte, Janice; Almenar, Eva

2015-03-30

Current consumer demand for high-quality ready-to-eat fresh fruit in convenient bio-based packaging was met utilizing sanitized stem-free sweet cherries and a polylactic acid (PLA) cup with a PLA peelable microperforated lid. The newly developed packaging system was compared with the petroleum-based macroperforated bag currently used for retail. After 27 days of storage at 1 °C, the PLA package maintained the cherry firmness, compared with a 50% reduction of the controls. No fungal decay was detected in the cherries stored in PLA, while the controls were non-marketable after 21 days. The PLA package allowed minimal weight loss (0.8%), compared with a weight loss of approximately 16% in the controls. Differences in the cherry aroma, color, acidity, soluble solids content, pH and quality index were also caused by the packaging type. A consumer sensory evaluation showed that cherries stored in PLA packages were more acceptable than those of the controls for appearance, texture, flavor and overall acceptability. The new package matched both the consumer demand for high-quality fresh fruit ready for consumption in convenient bio-based packaging and the extended fruit marketability and consumer satisfaction desired by industry. © 2014 Society of Chemical Industry.

78 FR 19354 - Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and... March 16, 2013. The following Applications for Certificates of Public Convenience and Necessity and...

78 FR 19354 - Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and... March 9, 2013. The following Applications for Certificates of Public Convenience and Necessity and...

78 FR 75441 - Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and... Novermber 30, 2013. The following Applications for Certificates of Public Convenience and Necessity and...

Attitudes toward Physical Education of Female High School Students

ERIC Educational Resources Information Center

Woodson-Smith, Andrea; Dorwart, Catherine E.; Linder, Amy

2015-01-01

The purpose of this study was to determine the attitudes of female high school students toward PE in selected North Carolina schools. The high schools were conveniently selected to include the Northeast Piedmont urban region of North Carolina. Participants consisted of 102 female students aged 14 to 18 years old who were enrolled in ninth to 12th…

Iron metabolism in African American women in the second and third trimesters of high-risk pregnancies

USDA-ARS?s Scientific Manuscript database

Objective: To examine iron metabolism during the second and third trimesters in African American women with high-risk pregnancies. Design: Longitudinal pilot study. Setting: Large, university-based, urban Midwestern U.S. medical center. Participants: Convenience sample of 32 African American wome...

NATIONAL WEATHER SERVICE MARINE PRODUCTS VIA INTERNET

Science.gov Websites

! Boating Safety Beach Hazards Rip Currents Hypothermia Hurricanes Thunderstorms Lightning Coastal Flooding Text Forecasts and Products. For convenience, High Seas, Offshore and Coastal marine forecasts are available via the Internet for most U.S. coastal areas. Gridded forecast data for offshore and high seas

48 CFR 809.270 - Qualified products for convenience/labor-saving foods.

Code of Federal Regulations, 2010 CFR

2010-10-01

... convenience/labor-saving foods. 809.270 Section 809.270 Federal Acquisition Regulations System DEPARTMENT OF... 809.270 Qualified products for convenience/labor-saving foods. (a) Each VISN Nutrition and Food Service representative is authorized to establish a common VISN QPL for convenience and labor-saving foods...

75 FR 53999 - Office of the Secretary: Notice of Applications for Certificates of Public Convenience and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-02

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart Q) Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air... following Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits...

78 FR 63273 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart Q) Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air... following Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits...

48 CFR 49.603 - Formats for termination for convenience settlement agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for convenience settlement agreements. 49.603 Section 49.603 Federal Acquisition Regulations System... Formats 49.603 Formats for termination for convenience settlement agreements. The formats to be used for termination for convenience settlement agreements should be substantially as shown in this section (see 49.109...

49 CFR 1150.23 - Modified certificate of public convenience and necessity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Modified certificate of public convenience and..., ACQUIRE, OR OPERATE RAILROAD LINES Modified Certificate of Public Convenience and Necessity § 1150.23 Modified certificate of public convenience and necessity. (a) The operator must file a notice with the...

Course Convenience, Perceived Learning, and Course Satisfaction across Course Formats

ERIC Educational Resources Information Center

Sanford, Douglas; Ross, Douglas; Rosenbloom, Alfred; Singer, Daniel

2017-01-01

Students' desire for course convenience may lead to their preference for online courses. But in their desire for convenience, are students sacrificing satisfaction or perceived learning? This article investigates the moderating impact of course format on the relationship between convenience and both perceived learning and satisfaction. Moderated…

Convenience Store Operations.

ERIC Educational Resources Information Center

Luter, Robert R.

This self-paced, individualized instructional guide is designed for use by those who are currently working in a convenience store or by those who wish to learn the basics of convenience store marketing and operations. Addressed in the individual units of the guide are the following topics: today's convenience store, regular duties and…

Beyond supermarkets: Food outlet location selection in four U.S. cities over time

PubMed Central

Rummo, Pasquale E.; Guilkey, David K.; Ng, Shu Wen; Popkin, Barry M.; Evenson, Kelly R.; Gordon-Larsen, P.

2017-01-01

Introduction Understanding what influences where food outlets locate is important for mitigating disparities in access to healthy food outlets. However, few studies have examined how neighborhood characteristics influence the neighborhood food environment over time, and whether these relationships differ by neighborhood-level income. Methods Neighborhood-level data from four U.S. cities (Birmingham, AL; Chicago, IL; Minneapolis, MN; Oakland, CA) from 1986, 1993, 1996, 2001, 2006, and 2011 were used with two-step econometric models to estimate longitudinal associations between neighborhood-level characteristics (z-scores) and the log-transformed count/km2 (density) of food outlets within real-estate-derived neighborhoods. We examined associations with lagged neighborhood-level sociodemographics and lagged density of food outlets, with interaction terms for neighborhood-level income. Data were analyzed in 2016. Results Neighborhood-level income at earlier years was negatively associated with the current density of convenience stores (β= −0.27; 95% CI: −0.16, −0.38; p<0.001). The percentage of neighborhood white population was negatively associated with fast food restaurant density in low income neighborhoods (10th percentile of income: β= −0.17; 95% CI: −0.34, −0.002; p=0.05), and the density of smaller grocery stores across all income levels (β= −0.27; 95% CI: −0.45, −0.09; p=0.003). There was a lack of policy-relevant associations between the pre-existing food environment and the current density of food outlet types, including supermarkets. Conclusions Socioeconomically-disadvantaged populations and minority populations may attract ‘unhealthy’ food outlets over time. To support equal access to healthy food outlets, the availability of ‘less healthy’ food outlets types may be relatively more important than the potential lack of supermarkets or full-service restaurants. PMID:27865651

Beyond Supermarkets: Food Outlet Location Selection in Four U.S. Cities Over Time.

PubMed

Rummo, Pasquale E; Guilkey, David K; Ng, Shu Wen; Popkin, Barry M; Evenson, Kelly R; Gordon-Larsen, Penny

2017-03-01

Understanding what influences where food outlets locate is important for mitigating disparities in access to healthy food outlets. However, few studies have examined how neighborhood characteristics influence the neighborhood food environment over time, and whether these relationships differ by neighborhood-level income. Neighborhood-level data from four U.S. cities (Birmingham, AL; Chicago, IL; Minneapolis, MN; Oakland, CA) from 1986, 1993, 1996, 2001, 2006, and 2011 were used with two-step econometric models to estimate longitudinal associations between neighborhood-level characteristics (z-scores) and the log-transformed count/km 2 (density) of food outlets within real estate-derived neighborhoods. Associations were examined with lagged neighborhood-level sociodemographics and lagged density of food outlets, with interaction terms for neighborhood-level income. Data were analyzed in 2016. Neighborhood-level income at earlier years was negatively associated with the current density of convenience stores (β= -0.27, 95% CI= -0.16, -0.38, p<0.001). The percentage of neighborhood white population was negatively associated with fast food restaurant density in low-income neighborhoods (10th percentile of income: β= -0.17, 95% CI= -0.34, -0.002, p=0.05), and the density of smaller grocery stores across all income levels (β= -0.27, 95% CI= -0.45, -0.09, p=0.003). There was a lack of policy-relevant associations between the pre-existing food environment and the current density of food outlet types, including supermarkets. Socioeconomically disadvantaged and minority populations may attract "unhealthy" food outlets over time. To support equal access to healthy food outlets, the availability of "less healthy" food outlets types may be relatively more important than the potential lack of supermarkets or full-service restaurants. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Oxygen mapping: Probing a novel seeding strategy for bone tissue engineering.

PubMed

Westphal, Ines; Jedelhauser, Claudia; Liebsch, Gregor; Wilhelmi, Arnd; Aszodi, Attila; Schieker, Matthias

2017-04-01

Bone tissue engineering (BTE) utilizing biomaterial scaffolds and human mesenchymal stem cells (hMSCs) is a promising approach for the treatment of bone defects. The quality of engineered tissue is crucially affected by numerous parameters including cell density and the oxygen supply. In this study, a novel oxygen-imaging sensor was introduced to monitor the oxygen distribution in three dimensional (3D) scaffolds in order to analyze a new cell-seeding strategy. Immortalized hMSCs, pre-cultured in a monolayer for 30-40% or 70-80% confluence, were used to seed demineralized bone matrix (DBM) scaffolds. Real-time measurements of oxygen consumption in vitro were simultaneously performed by the novel planar sensor and a conventional needle-type sensor over 24 h. Recorded oxygen maps of the novel planar sensor revealed that scaffolds, seeded with hMSCs harvested at lower densities (30-40% confluence), exhibited rapid exponential oxygen consumption profile. In contrast, harvesting cells at higher densities (70-80% confluence) resulted in a very slow, almost linear, oxygen decrease due to gradual achieving the stationary growth phase. In conclusion, it could be shown that not only the seeding density on a scaffold, but also the cell density at the time point of harvest is of major importance for BTE. The new cell seeding strategy of harvested MSCs at low density during its log phase could be a useful strategy for an early in vivo implantation of cell-seeded scaffolds after a shorter in vitro culture period. Furthermore, the novel oxygen imaging sensor enables a continuous, two-dimensional, quick and convenient to handle oxygen mapping for the development and optimization of tissue engineered scaffolds. Biotechnol. Bioeng. 2017;114: 894-902. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Trip generation at special sites.

DOT National Transportation Integrated Search

1984-01-01

Seven-day volume counts were made at fast-food restaurants with drive-thru service, convenience markets, condominiums, drive-in banks, high-rise apartments, planned unit developments, mobile home parks, day-care centers, churches, suburban motels, an...

Subcutaneous Interferon β-1a Administration by Electronic Auto-injector is Associated with High Adherence in Patients with Relapsing Remitting Multiple Sclerosis in a Real-life Study.

PubMed

Järvinen, Elina; Multanen, Juha; Atula, Sari

2017-02-20

The objective was to investigate adherence measured by an electronic auto-injector device, and self-reported adherence and treatment convenience in subjects with relapsing remitting multiple sclerosis (RRMS), using an electronic auto-injector Rebismart ® to self-inject interferon β-1a. Thirty one patients with RRMS using the electronic auto-injector Rebismart ® for self-injecting interferon β-1a subcutaneously three times weekly were included in a real-life clinical multicenter study for 24 weeks in Finland. Mean adherence reported by the device and mean self-assessment of adherence were studied. Reasons for missing injections and treatment convenience were assessed. Association between adherence and gender and age were studied. The mean adherence calculated from the device data was 93.5%. The mean self-assessment of adherence was 96.6%. The most common reason for missing an injection was forget-fulness. Adherence (measured by the device) was not changed over time. In the high adherence group there were more females and young patients (<30 years of age). The auto-injector was found to substantially ease the treatment by 90% of the patients. The electronic auto-injector was associated with high adherence to treatment. The device was found to ease the patient's treatment and it was perceived as easy to use. It is a convenient tool to assess patient's adherence to treatment.

Differentiation of hepatocytes from induced pluripotent stem cells derived from human hair follicle mesenchymal stem cells.

PubMed

Shi, Xu; Lv, Shuang; He, Xia; Liu, Xiaomei; Sun, Meiyu; Li, Meiying; Chi, Guangfan; Li, Yulin

2016-10-01

Due to the limitations of organ donors and immune rejection in severe liver diseases, stem cell-based therapy presents a promising application for tissue repair and regeneration. As a novel cell source, mesenchymal stem cells separated from human hair follicles (HF-MSCs) are convenient to obtain and have no age limit. To date, the differentiation of HF-MSCs into hepatocytes has not been reported. In this study, we explored whether HF-MSCs and HF-MSC-derived-induced pluripotent stem cells (HF-iPS) could differentiate into hepatocytes in vitro. Flow cytometry, Oil Red O stain and Alizarin Red stain were used to identify the characteristics of HF-MSCs. The expression of liver-specific gene was detected by immunofluorescence and Quantitative Polymerase Chain Reaction. Periodic Acid-Schiff stain, Indocyanine Green stain and Low-Density Lipoprotein stain were performed to evaluate the functions of induced hepatocyte-like cells (HLCs). HF-MSCs were unable to differentiate into HLCs using previously reported procedures for MSCs from other tissues. However, HF-iPS efficiently induced the generation of HLCs that expressed hepatocyte markers and drug metabolism-related genes. HF-iPS can be used as novel and alternative cellular tools for inducing hepatocytes in vitro, simultaneously benefiting from utilizing HF-MSCs as a noninvasive and convenient cell source for reprogramming.

A convenient synthesis of 1,1-disubstituted 1,2,3,4-tetrahydroisoquinolines via Pictet-Spengler reaction using titanium(IV) isopropoxide and acetic-formic anhydride.

PubMed

Horiguchi, Yoshie; Kodama, Hirokazu; Nakamura, Masayoshi; Yoshimura, Tsuyoshi; Hanezi, Kaori; Hamada, Hiroko; Saitoh, Toshiaki; Sano, Takehiro

2002-02-01

A synthesis of 1,1-disubstituted 1,2,3,4-tetrahydroisoquinolines (6) was achieved in a highly efficient manner via Pictet-Spengler reaction of arylethylamines (1) and acyclic and cyclic ketones (2) using titanium (IV) isopropoxide and acetic-formic anhydride. The cyclization of the in situ formed acyliminium ion (4) to N-formyl 1,2,3,4-tetrahydroisoquinoline (5) was greatly facilitated by using trifluoroacetic acid as an additional reagent. The Pictet-Spengler reaction was carried out by one pot procedure, providing a convenient and effective method for preparing various 1,2,3,4-tetrahydroisoquinolines.

Convenience samples and caregiving research: how generalizable are the findings?

PubMed

Pruchno, Rachel A; Brill, Jonathan E; Shands, Yvonne; Gordon, Judith R; Genderson, Maureen Wilson; Rose, Miriam; Cartwright, Francine

2008-12-01

We contrast characteristics of respondents recruited using convenience strategies with those of respondents recruited by random digit dial (RDD) methods. We compare sample variances, means, and interrelationships among variables generated from the convenience and RDD samples. Women aged 50 to 64 who work full time and provide care to a community-dwelling older person were recruited using either RDD (N = 55) or convenience methods (N = 87). Telephone interviews were conducted using reliable, valid measures of demographics, characteristics of the care recipient, help provided to the care recipient, evaluations of caregiver-care recipient relationship, and outcomes common to caregiving research. Convenience and RDD samples had similar variances on 68.4% of the examined variables. We found significant mean differences for 63% of the variables examined. Bivariate correlations suggest that one would reach different conclusions using the convenience and RDD sample data sets. Researchers should use convenience samples cautiously, as they may have limited generalizability.

Meal box schemes a convenient way to avoid convenience food? Uses and understandings of meal box schemes among Danish consumers.

PubMed

Hertz, Frej Daniel; Halkier, Bente

2017-07-01

The term convenience food is subject to diversification, lack of clarity and moral ambiguity. In this paper we address these issues and critically discuss convenience food by using empirical findings from a Danish study that deals with practitioners' uses of meal box schemes. The methodological design consists of thirteen individual interviews, four focus groups and some observations of cooking practices. We combine the empirical findings with a particular definition of convenience food by Brunner et al. (2010) and selected practice theoretical concepts. This particular combination enables us to categorize meal box schemes as a new form of convenience food called convenient food. In addition, results suggest that meal box schemes reduce leftovers from dinner. Meal boxes also influence dinner related activities such as planning ahead in time and grocery shopping, which require less physical and mental effort. Copyright © 2017 Elsevier Ltd. All rights reserved.

78 FR 33466 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending April 27, 2013. The following Applications for Certificates of Public Convenience and...

78 FR 2711 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending November 17, 2012. The following Applications for Certificates of Public Convenience...

75 FR 29601 - Office of the Secretary: Notice of Applications for Certificates of Public Convenience and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

... Public Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of...

78 FR 50138 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending August 3, 2013. The following Applications for Certificates of Public Convenience and...

75 FR 57544 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... the transfer from ASTAR to AUSA of ASTAR's certificates of public convenience and necessity...

78 FR 63273 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending September 28, 2013. The following Applications for Certificates of Public Convenience...

48 CFR 52.249-4 - Termination for Convenience of the Government (Services) (Short Form).

Code of Federal Regulations, 2010 CFR

2010-10-01

... Convenience of the Government (Services) (Short Form). 52.249-4 Section 52.249-4 Federal Acquisition... CONTRACT CLAUSES Text of Provisions and Clauses 52.249-4 Termination for Convenience of the Government... convenience of the Government, limit termination settlement charges to services rendered before the date of...

78 FR 3067 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending December 29, 2012. The following Applications for Certificates of Public Convenience...

76 FR 10085 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-23

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... its certificate of public convenience and necessity in that name. Renee V. Wright, Program Manager...

76 FR 68256 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... Corporation (``JetBlue'') requesting a certificate of public convenience and necessity and requests the...

78 FR 8219 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending January 12, 2013. The following Applications for Certificates of Public Convenience...

78 FR 16356 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending March 2, 2013. The following Applications for Certificates of Public Convenience and...

76 FR 54524 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under subpart B (formerly subpart Q) of... convenience and necessity authorizing Universal to engage in foreign charter air transportation of persons...

78 FR 72747 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending Novermber 16, 2013. The following Applications for Certificates of Public Convenience...

78 FR 24288 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending April 13, 2013. The following Applications for Certificates of Public Convenience and...

75 FR 41564 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under subpart B (formerly subpart Q) of.... Description: Application of Virgin America Inc. requesting a certificate of public convenience and necessity...

75 FR 28096 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-19

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of...: Application of Jet-A, LLC requesting a certificate of public convenience and necessity authorizing interstate...

30 CFR 885.22 - When and how can my grant be terminated for convenience?

Code of Federal Regulations, 2010 CFR

2010-07-01

... convenience? 885.22 Section 885.22 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT... § 885.22 When and how can my grant be terminated for convenience? Either you or we may terminate the grant for convenience following the procedures in 43 CFR part 12. ...

78 FR 56768 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending August 24, 2013. The following Applications for Certificates of Public Convenience and...

48 CFR 1652.249-71 - FEHBP termination for convenience of the government-negotiated benefits contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... convenience of the government-negotiated benefits contracts. 1652.249-71 Section 1652.249-71 Federal... convenience of the government—negotiated benefits contracts. As prescribed in section 1649.101-71, the following clause shall be inserted in all FEHBP contracts. FEHBP Termination for Convenience of the...

78 FR 56768 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending August 31, 2013. The following Applications for Certificates of Public Convenience and...

78 FR 50138 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending July 27, 2013. The following Applications for Certificates of Public Convenience and...

75 FR 12807 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... convenience and necessity authorizing Airways to engage in interstate charter air transportation of persons...

76 FR 20435 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... Public Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of...

77 FR 54945 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... disclaim jurisdiction over the transfer of its certificates of public convenience and necessity to...

78 FR 9449 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending January 26, 2013. The following Applications for Certificates of Public Convenience...

75 FR 1113 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... public convenience and necessity for foreign air transportation, Route 890 be extended for eight-month...

48 CFR 52.249-3 - Termination for Convenience of the Government (Dismantling, Demolition, or Removal of Improvements).

Code of Federal Regulations, 2010 CFR

2010-10-01

... Convenience of the Government (Dismantling, Demolition, or Removal of Improvements). 52.249-3 Section 52.249-3... Convenience of the Government (Dismantling, Demolition, or Removal of Improvements). As prescribed in 49.502(b)(2), insert the following clause: Termination for Convenience of the Government (Dismantling...

75 FR 6790 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of.... Description: Application of Wings Airways, Inc. requesting a certificate of public convenience and necessity...

78 FR 57446 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-18

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending September 7, 2013. The following Applications for Certificates of Public Convenience...

78 FR 33465 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending May 17, 2013. The following Applications for Certificates of Public Convenience and...

78 FR 14619 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending February 16, 2013. The following Applications for Certificates of Public Convenience...

48 CFR 52.249-5 - Termination for Convenience of the Government (Educational and Other Nonprofit Institutions).

Code of Federal Regulations, 2010 CFR

2010-10-01

... Convenience of the Government (Educational and Other Nonprofit Institutions). 52.249-5 Section 52.249-5... Convenience of the Government (Educational and Other Nonprofit Institutions). As prescribed in 49.502(d), insert the following clause: Termination for Convenience of the Government (Educational and Other...

75 FR 48738 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under subpart B (formerly subpart Q) of... certificate of public convenience and necessity authorizing Freedom Air to engage in interstate scheduled air...

78 FR 2710 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Convenience and Necessity and Foreign Air Carrier Permits Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (formerly Subpart Q) during the Week Ending December 15, 2012. The following Applications for Certificates of Public Convenience...

75 FR 39325 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier. Permits were filed under Subpart B (formerly Subpart Q) of... of public convenience and necessity authorizing Freedom Air to engage in foreign charter air...

Contribution to the theory of tidal oscillations of an elastic earth. External tidal potential

NASA Technical Reports Server (NTRS)

Musen, P.

1974-01-01

The differential equations of the tidal oscillations of the earth were established under the assumption that the interior of the earth is laterally inhomogeneous. The theory was developed using vectorial and dyadic symbolism to shorten the exposition and to reduce the differential equations to a symmetric form convenient for programming and for numerical integration. The formation of tidal buldges on the surfaces of discontinuity and the changes in the internal density produce small periodic variations in the exterior geopotential which are reflected in the motion of artificial satellites. The analoques of Love elastic parameters in the expansion of exterior tidal potential reflect the asymmetric and inhomogeneous structure of the interior of the earth.

Main directions in the simulation of physical characteristics of the World Ocean and seas

NASA Astrophysics Data System (ADS)

Sarkisyan, A. S.

2016-07-01

A brief analysis of the oceanographic papers printed in this issue is presented. For convenience of the reader, the paper by K. Bryan, a prominent scientist and expert in modeling the physical characteristics of the ocean, is discussed in detail. The remaining studies are described briefly in several sections: direct prognostic modeling, diagnosis-adaptation, four-dimensional analysis, and operational oceanography. At the end of the study, we separately discuss the problem of the reproduction of coastal intensification of temperature, salinity, density, and currents. We believe that the quality of the simulation results can be best assessed in terms of the intensity of coastal currents. In conclusion, this opinion is justified in detail.

Is the food environment surrounding schools associated with the diet quality of adolescents in Otago, New Zealand?

PubMed

Clark, Emma M; Quigg, Robin; Wong, Jyh Eiin; Richards, Rose; Black, Katherine E; Skidmore, Paula M L

2014-11-01

Using a sample of adolescents from schools in Otago, New Zealand, associations between food outlets around schools and dietary quality were investigated. Food outlet environment data were derived using GIS data. Multivariate regression analysis results showed that outlet density, in an 800m buffer around schools, of cafes and restaurants, supermarkets and takeaways was associated with higher Diet Quality Index scores in boys, and distance to nearest outlet for convenience stores, cafes and restaurants and supermarkets with lower scores for girls. Effect sizes were small, suggesting that the food environment around schools plays a minor role in adolescent diet quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

Schwinger mechanism in the SU(3) Nambu-Jona-Lasinio model with an electric field

NASA Astrophysics Data System (ADS)

Tavares, William R.; Avancini, Sidney S.

2018-05-01

In this work we study the electrized quark matter under finite temperature and density conditions in the context of the SU(2) and SU(3) Nambu-Jona-Lasinio models. To this end, we evaluate the effective quark masses and the Schwinger quark-antiquark pair production rate. For the SU(3) NJL model we incorporate in the Lagrangian the 't Hooft determinant and we present a set of analytical expressions more convenient for numerical evaluations. We predict a decrease of the pseudocritical electric field with the increase of the temperature for both models and a more prominent production rate for the SU(3) model when compared to the SU(2).

Measurement of in vitro microtubule polymerization by turbidity and fluorescence.

PubMed

Mirigian, Matthew; Mukherjee, Kamalika; Bane, Susan L; Sackett, Dan L

2013-01-01

Tubulin polymerization may be conveniently monitored by the increase in turbidity (optical density, or OD) or by the increase in fluorescence intensity of diamidino-phenylindole. The resulting data can be a quantitative measure of microtubule (MT) assembly, but some care is needed in interpretation, especially of OD data. Buffer formulations used for the assembly reaction significantly influence the polymerization, both by altering the critical concentration for polymerization and by altering the exact polymer produced-for example, by increasing the production of sheet polymers in addition to MT. Both the turbidity and the fluorescence methods are useful for demonstrating the effect of MT-stabilizing or -destabilizing additives. 2013 Published by Elsevier Inc.

Association between Self-Reports of Being High and Perceptions about the Safety of Drugged and Drunk Driving

ERIC Educational Resources Information Center

Allen, Jane A.; Davis, Kevin C.; Duke, Jennifer C.; Nonnemaker, James M.; Bradfield, Brian R.; Farrelly, Matthew C.; Novak, Scott P.; Zarkin, Gary A.

2016-01-01

This study examines the relationship between self-reports of being high on marijuana and perceptions about driving high or drunk. Data were collected in 2014 from an online convenience sample of adult, past 30-day marijuana and hashish users in Colorado and Washington (n = 865). Respondents were asked, "Were you high or feeling the effects of…

Quality of artemisinin-based combination formulations for malaria treatment: prevalence and risk factors for poor quality medicines in public facilities and private sector drug outlets in Enugu, Nigeria.

PubMed

Kaur, Harparkash; Allan, Elizabeth Louise; Mamadu, Ibrahim; Hall, Zoe; Ibe, Ogochukwu; El Sherbiny, Mohamed; van Wyk, Albert; Yeung, Shunmay; Swamidoss, Isabel; Green, Michael D; Dwivedi, Prabha; Culzoni, Maria Julia; Clarke, Siân; Schellenberg, David; Fernández, Facundo M; Onwujekwe, Obinna

2015-01-01

Artemisinin-based combination therapies are recommended by the World Health Organisation (WHO) as first-line treatment for Plasmodium falciparum malaria, yet medication must be of good quality for efficacious treatment. A recent meta-analysis reported 35% (796/2,296) of antimalarial drug samples from 21 Sub-Saharan African countries, purchased from outlets predominantly using convenience sampling, failed chemical content analysis. We used three sampling strategies to purchase artemisinin-containing antimalarials (ACAs) in Enugu metropolis, Nigeria, and compared the resulting quality estimates. ACAs were purchased using three sampling approaches--convenience, mystery clients and overt, within a defined area and sampling frame in Enugu metropolis. The active pharmaceutical ingredients were assessed using high-performance liquid chromatography and confirmed by mass spectrometry at three independent laboratories. Results were expressed as percentage of APIs stated on the packaging and used to categorise each sample as acceptable quality, substandard, degraded, or falsified. Content analysis of 3024 samples purchased from 421 outlets using convenience (n=200), mystery (n=1,919) and overt (n=905) approaches, showed overall 90.8% ACAs to be of acceptable quality, 6.8% substandard, 1.3% degraded and 1.2% falsified. Convenience sampling yielded a significantly higher prevalence of poor quality ACAs, but was not evident by the mystery and overt sampling strategies both of which yielded results that were comparable between each other. Artesunate (n=135; 4 falsified) and dihydroartemisinin (n=14) monotherapy tablets, not recommended by WHO, were also identified. Randomised sampling identified fewer falsified ACAs than previously reported by convenience approaches. Our findings emphasise the need for specific consideration to be given to sampling frame and sampling approach if representative information on drug quality is to be obtained.

Does dependency make a difference? The role of convenience, social influence, facilitating condition and self-efficacy on student's purchase behaviour of smartphone

NASA Astrophysics Data System (ADS)

Jaganathan, Mathivannan; Mustapa, Azrain Nasyrah; Hasan, Wan Azlina Wan; Mat, Nik Kamariah Nik; Alekam, Jamal Mohammed Esmail

2014-12-01

It is an undeniable fact that penetration level and usage and sales of Smartphone dramatically increased past few years, whereby; it has increased to almost 60 percent of total population. Despite the high penetration of smartphone, previous studies have exhibited inconsistent findings towards understanding the behavioural intention to use smartphone especially among university students. Thus, the purpose of this study is to examine purchasing behaviour of Smartphone among students. From the literature, five antecedents of purchasing behaviour were identified. Each variable is measured using 7-point Likert scale: convenience (10 items), social influence (6 items), self-efficacy (10 items), facilitating condition (11 items), dependency (14 items) and purchasing behaviour (4 items). Using the primary data collection method, 400 questionnaires were distributed to the target respondents of one of the public higher education in the northern region. The responses collected were 350 completed questionnaires representing 87.5 percent response rate. The data were analysed using Structural Equation Modeling (SEM) using AMOS. Confirmatory factor analysis of measurement models indicates adequate goodness or fit after few items were eliminated through modification indices verifications. Therefore, goodness of fit for the generated structural model shows the adequate fit. This study has established four direct significant causal effects and two significant mediating effects: (1) convenience and dependency, (2) social influence and dependency, (3) facilitating condition and purchase behaviour, (4), dependency and purchase behaviour. The significant mediating results are: (1). Dependency mediates the relationship between convenience and purchase behaviour; (2) dependency mediates social influence and purchase behaviour. Thus, findings suggested that convenience, social influence and dependency play a role in determining students purchase behaviour of smartphone. The researchers hope the findings of this study will contribute theoretically and practically to scholars, marketers and smartphone manufacturers.

75 FR 32535 - Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-08

... Convenience and Necessity and Foreign Air Carrier Permits Under Subpart B; Week Ending May 22, 2010 Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under... Certificates of Public Convenience and Necessity and Foreign Air Carrier Permits were filed under subpart B...

41 CFR 102-5.95 - Is the comfort and/or convenience of an employee considered sufficient justification to authorize...

Code of Federal Regulations, 2010 CFR

2010-07-01

... convenience of an employee considered sufficient justification to authorize home-to-work transportation? 102-5...-to-Work Transportation § 102-5.95 Is the comfort and/or convenience of an employee considered sufficient justification to authorize home-to-work transportation? No, the comfort and/or convenience of an...

75 FR 1113 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of.... Description: Application of Kalitta Air, L.L.C. requesting: (1) A certificate of public convenience and...

30 CFR 886.26 - When and how can my grant be terminated for convenience?

Code of Federal Regulations, 2010 CFR

2010-07-01

... convenience? 886.26 Section 886.26 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT... INDIAN TRIBES § 886.26 When and how can my grant be terminated for convenience? Either you or we may... worth the additional costs. We will handle a termination for convenience as an amendment to the grant to...

48 CFR 52.249-2 - Termination for Convenience of the Government (Fixed-Price).

Code of Federal Regulations, 2010 CFR

2010-10-01

... Convenience of the Government (Fixed-Price). 52.249-2 Section 52.249-2 Federal Acquisition Regulations System... Text of Provisions and Clauses 52.249-2 Termination for Convenience of the Government (Fixed-Price). As prescribed in 49.502(b)(1)(i), insert the following clause: Termination for Convenience of the Government...

78 FR 45011 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-25

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... reissuance of Pinnacle's certificates of public convenience and necessity in the name of ``ENDEAVOR AIR, INC...

77 FR 49478 - Notice of Applications for Certificates of Public Convenience and Necessity and Foreign Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-16

... Public Convenience and Necessity and Foreign Air Carrier Permits Filed Under Subpart B (Formerly Subpart... Convenience and Necessity and Foreign Air Carrier Permits were filed under Subpart B (formerly Subpart Q) of... Application of Rhoades Aviation, Inc. d/b/a Transair requesting a certificate of public convenience and...

The Impact of Personality, Goal Orientation and Self-Efficacy on Participation of High School Teachers in Learning Activities in the Workplace

ERIC Educational Resources Information Center

van Daal, Tine; Donche, Vincent; De Maeyer, Sven

2014-01-01

This study examines the influence of personality traits, goal orientation and self-efficacy on high school teachers' participation in learning activities in the workplace (i.e. experimentation, informal interaction with colleagues, self-regulation and avoidance behaviour). A convenience sample of 95 teachers from six high schools in Flanders…

Reduced Availability of Sugar-Sweetened Beverages and Diet Soda Has a Limited Impact on Beverage Consumption Patterns in Maine High School Youth

ERIC Educational Resources Information Center

Whatley Blum, Janet E.; Davee, Anne-Marie; Beaudoin, Christina M.; Jenkins, Paul L.; Kaley, Lori A.; Wigand, Debra A.

2008-01-01

Objective: To examine change in high school students' beverage consumption patterns pre- and post-intervention of reduced availability of sugar-sweetened beverages (SSB) and diet soda in school food venues. Design: A prospective, quasi-experimental, nonrandomized study design. Setting: Public high schools. Participants: A convenience sample from…

The Effect of Socioeconomic Status and Gender on High School Student Perceptions about Career and Technical Education

ERIC Educational Resources Information Center

Chadwell, Briael Marie

2016-01-01

This quantitative study examines the perceptions of career and technical education (CTE) among high school students based on their socioeconomic status and gender, and the interaction between the two. The study used a convenience sample of 207 students from four coastal South Carolina high schools. The data was collected using the Image of…

Genetic analysis of an elite super-hybrid rice parent using high-density SNP markers.

PubMed

Duan, Meijuan; Sun, Zhizhong; Shu, Liping; Tan, Yanning; Yu, Dong; Sun, Xuewu; Liu, Ruifen; Li, Yujie; Gong, Siyu; Yuan, Dingyang

2013-08-15

With an increasing world population and a gradual decline in the amount of arable land, food security remains a global challenge. Continued increases in rice yield will be required to break through the barriers to grain output. In order to transition from hybrid rice to super-hybrid rice, breeding demands cannot be addressed through traditional heterosis. Therefore, it is necessary to incorporate high yield loci from other rice genetic groups and to scientifically utilize intersubspecific heterosis in breeding lines. In this study, 781 lines from a segregating F2 population constructed by crossing the indica variety, "Giant Spike Rice" R1128 as trait donor with the japonica cultivar 'Nipponbare', were re-sequenced using high-throughout multiplexed shotgun genotyping (MSG) technology. In combination with high-density single nucleotide polymorphisms, quantitative trait locus (QTL) mapping and genetic effect analysis were performed for five yield factors (spikelet number per panicle, primary branches per panicle, secondary branches per panicle, plant height, and panicle length) to explore the genetic mechanisms underlying the formation of the giant panicle of R1128. Also, they were preformed to locate new high-yielding rice genetic intervals, providing data for super-high-yielding rice breeding. QTL mapping and genetic effect analysis for five yield factors in the population gave the following results: 49 QTLs for the five yield factors were distributed on 11 of 12 chromosomes. The super-hybrid line R1128 carries multiple major genes for good traits, including Sd1 for plant height, Hd1 and Ehd1 for heading date, Gn1a for spikelet number and IPA1 for ideal plant shape. These genes accounted for 44.3%, 21.9%, 6.2%, 12.9% and 10.6% of the phenotypic variation in the individual traits. Six novel QTLs, qph1-2, qph9-1, qpl12-1, qgn3-1, qgn11-1and qsbn11-1 are reported here for the first time. High-throughout sequencing technology makes it convenient to study rice genomics and makes the QTL/gene mapping direct, efficient, and more reliable. The genetic regions discovered in this study will be valuable for breeding in rice varieties because of the diverse genetic backgrounds of the rice.

Comparison of body composition between fashion models and women in general.

PubMed

Park, Sunhee

2017-12-31

The present study compared the physical characteristics and body composition of professional fashion models and women in general, utilizing the skinfold test. The research sample consisted of 90 professional fashion models presently active in Korea and 100 females in the general population, all selected through convenience sampling. Measurement was done following standardized methods and procedures set by the International Society for the Advancement of Kinanthropometry. Body density (mg/ mm) and body fat (%) were measured at the biceps, triceps, subscapular, and suprailiac areas. The results showed that the biceps, triceps, subscapular, and suprailiac areas of professional fashion models were significantly thinner than those of women in general (p<.001), and that their waist size was also significantly smaller (p<.001). However, hip circumference showed no significant difference. Body mass index, waist-to-hip ratio, and body fat (%) in professional fashion models were significantly lower than those in women in general (p<.001), while the body density in professional fashion models was significantly greater (p<.001). Body density in professional fashion models is higher, due to taller stature, than in women in general. Moreover, there is an effort on the part of fashion models to lose weight in order to maintain a thin body and a low weight for occupational reasons. ©2017 The Korean Society for Exercise Nutrition

Comparison of body composition between fashion models and women in general

PubMed Central

Park, Sunhee

2017-01-01

[Purpose] The present study compared the physical characteristics and body composition of professional fashion models and women in general, utilizing the skinfold test. [Methods] The research sample consisted of 90 professional fashion models presently active in Korea and 100 females in the general population, all selected through convenience sampling. Measurement was done following standardized methods and procedures set by the International Society for the Advancement of Kinanthropometry. Body density (mg/ mm) and body fat (%) were measured at the biceps, triceps, subscapular, and suprailiac areas. [Results] The results showed that the biceps, triceps, subscapular, and suprailiac areas of professional fashion models were significantly thinner than those of women in general (p<.001), and that their waist size was also significantly smaller (p<.001). However, hip circumference showed no significant difference. Body mass index, waist-to-hip ratio, and body fat (%) in professional fashion models were significantly lower than those in women in general (p<.001), while the body density in professional fashion models was significantly greater (p<.001). [Conclusion] Body density in professional fashion models is higher, due to taller stature, than in women in general. Moreover, there is an effort on the part of fashion models to lose weight in order to maintain a thin body and a low weight for occupational reasons. PMID:29370670

[Development of a software standardizing optical density with operation settings related to several limitations].

PubMed

Tu, Xiao-Ming; Zhang, Zuo-Heng; Wan, Cheng; Zheng, Yu; Xu, Jin-Mei; Zhang, Yuan-Yuan; Luo, Jian-Ping; Wu, Hai-Wei

2012-12-01

To develop a software that can be used to standardize optical density to normalize the procedures and results of standardization in order to effectively solve several problems generated during standardization of in-direct ELISA results. The software was designed based on the I-STOD method with operation settings to solve the problems that one might encounter during the standardization. Matlab GUI was used as a tool for the development. The software was tested with the results of the detection of sera of persons from schistosomiasis japonica endemic areas. I-STOD V1.0 (WINDOWS XP/WIN 7, 0.5 GB) was successfully developed to standardize optical density. A serial of serum samples from schistosomiasis japonica endemic areas were used to examine the operational effects of I-STOD V1.0 software. The results indicated that the software successfully overcame several problems including reliability of standard curve, applicable scope of samples and determination of dilution for samples outside the scope, so that I-STOD was performed more conveniently and the results of standardization were more consistent. I-STOD V1.0 is a professional software based on I-STOD. It can be easily operated and can effectively standardize the testing results of in-direct ELISA.

Topological magnetoelectric pump in three dimensions

NASA Astrophysics Data System (ADS)

Fukui, Takahiro; Fujiwara, Takanori

2017-11-01

We study the topological pump for a lattice fermion model mainly in three spatial dimensions. We first calculate the U(1) current density for the Dirac model defined in continuous space-time to review the known results as well as to introduce some technical details convenient for the calculations of the lattice model. We next investigate the U(1) current density for a lattice fermion model, a variant of the Wilson-Dirac model. The model we introduce is defined on a lattice in space but in continuous time, which is suited for the study of the topological pump. For such a model, we derive the conserved U(1) current density and calculate it directly for the (1 +1 )-dimensional system as well as (3 +1 )-dimensional system in the limit of the small lattice constant. We find that the current includes a nontrivial lattice effect characterized by the Chern number, and therefore the pumped particle number is quantized by the topological reason. Finally, we study the topological temporal pump in 3 +1 dimensions by numerical calculations. We discuss the relationship between the second Chern number and the first Chern number, the bulk-edge correspondence, and the generalized Streda formula which enables us to compute the second Chern number using the spectral asymmetry.

Hierarchical spatial capture-recapture models: Modeling population density from stratified populations

USGS Publications Warehouse

Royle, J. Andrew; Converse, Sarah J.

2014-01-01

Capture–recapture studies are often conducted on populations that are stratified by space, time or other factors. In this paper, we develop a Bayesian spatial capture–recapture (SCR) modelling framework for stratified populations – when sampling occurs within multiple distinct spatial and temporal strata.We describe a hierarchical model that integrates distinct models for both the spatial encounter history data from capture–recapture sampling, and also for modelling variation in density among strata. We use an implementation of data augmentation to parameterize the model in terms of a latent categorical stratum or group membership variable, which provides a convenient implementation in popular BUGS software packages.We provide an example application to an experimental study involving small-mammal sampling on multiple trapping grids over multiple years, where the main interest is in modelling a treatment effect on population density among the trapping grids.Many capture–recapture studies involve some aspect of spatial or temporal replication that requires some attention to modelling variation among groups or strata. We propose a hierarchical model that allows explicit modelling of group or strata effects. Because the model is formulated for individual encounter histories and is easily implemented in the BUGS language and other free software, it also provides a general framework for modelling individual effects, such as are present in SCR models.

Molecular Design of Antifouling Polymer Brushes Using Sequence-Specific Peptoids

DOE PAGES

Lau, King Hang Aaron; Sileika, Tadas S.; Park, Sung Hyun; ...

2014-11-26

Material systems that can be used to flexibly and precisely define the chemical nature and molecular arrangement of a surface would be invaluable for the control of complex biointerfacial interactions. For example, progress in antifouling polymer biointerfaces that prevents nonspecific protein adsorption and cell attachment, which can significantly improve the performance of an array of biomedical and industrial applications, is hampered by a lack of chemical models to identify the molecular features conferring their properties. Poly(N-substituted glycine) “peptoids” are peptidomimetic polymers that can be conveniently synthesized with specific monomer sequences and chain lengths, and are presented as a versatile platformmore » for investigating the molecular design of antifouling polymer brushes. Zwitterionic antifouling polymer brushes have captured significant recent attention, and a targeted library of zwitterionic peptoid brushes with different charge densities, hydration, separations between charged groups, chain lengths, and grafted chain densities, is quantitatively evaluated for their antifouling properties through a range of protein adsorption and cell attachment assays. Specific zwitterionic brush designs are found to give rise to distinct but subtle differences in properties. In conclusion, the results also point to the dominant roles of the grafted chain density and chain length in determining the performance of antifouling polymer brushes.« less

Communication Satisfaction, Organizational Citizenship Behavior and the Relationship to Student Achievement in High Schools

ERIC Educational Resources Information Center

Blanchard, Gayle A.

2012-01-01

This study used a correlational design that allowed the researcher to examine the relationship among communication satisfaction, organizational citizenship behaviors (OCB) and student achievement. High school teachers were surveyed from a convenience sample of 12 school districts in Arizona. Established instruments were used to survey teachers'…

Hole localization in Fe2O3 from density functional theory and wave-function-based methods

NASA Astrophysics Data System (ADS)

Ansari, Narjes; Ulman, Kanchan; Camellone, Matteo Farnesi; Seriani, Nicola; Gebauer, Ralph; Piccinin, Simone

2017-08-01

Hematite (α -Fe2O3 ) is a promising photocatalyst material for water splitting, where photoinduced holes lead to the oxidation of water and the release of molecular oxygen. In this work, we investigate the properties of holes in hematite using density functional theory (DFT) calculations with hybrid functionals. We find that holes form small polarons and, depending on the fraction of exact exchange included in the PBE0 functional, the site where the holes localize changes from Fe to O. We find this result to be independent of the size and structure of the system: small Fe2O3 clusters with tetrahedral coordination, larger clusters with octahedral coordination, Fe2O3 (001) surfaces in contact with water, and bulk Fe2O3 display a very similar behavior in terms of hole localization as a function of the fraction of exact exchange. We then use wave-function-based methods such as coupled cluster with single and double excitations and Møller-Plesset second-order perturbation theory applied on a cluster model of Fe2O3 to shed light on which of the two solutions is correct. We find that these high-level quantum chemistry methods suggest holes in hematite are localized on oxygen atoms. We also explore the use of the DFT +U approach as a computationally convenient way to overcome the known limitations of generalized gradient approximation functionals and recover a gap in line with experiments and hole localization on oxygen in agreement with quantum chemistry methods.

Self-gauged fiber-optic micro-heater with an operation temperature above 1000°C.

PubMed

Liu, Guigen; Sheng, Qiwen; Dam, Dustin; Hua, Jiong; Hou, Weilin; Han, Ming

2017-04-01

We report a fiber-optic micro-heater based on a miniature crystalline silicon Fabry-Perot interferometer (FPI) fusion spliced to the endface of a single-mode fiber. The silicon FPI, having a diameter of 100 μm and a length of 10 or 200 μm, is heated by a 980 nm laser diode guided through the lead-in fiber, leading to a localized hot spot with a temperature that can be conveniently tuned from the ambient temperature to >1000°C in air. In the meantime, using a white light system operating in the 1550 nm wavelength window where the silicon is transparent, the silicon FPI itself also serves as a thermometer with high resolution and high speed for convenient monitoring and precise control of the heater temperature. Due to its small size, high temperature capability, and easy operation, the micro-heater is attractive for applications in a variety of fields, such as biology, microfluidics system, mechanical engineering, and high-temperature optical sensing. As an example, the application of this micro-heater as a micro-boiler and micro-bubble generator has been demonstrated.

Consumers' convenience orientation towards meal preparation: conceptualization and measurement.

PubMed

Candel, M

2001-02-01

Consumer researchers consider convenience orientation towards meal preparation to be a relevant construct for understanding consumer behavior towards foods. This study set out to conceptualize this construct and to develop a scale that measures it. As examined in two different samples of meal preparers, the resulting scale is reliable, satisfies a unifactorial structure and has satisfactory convergent validity. The scale's nomological validity is supported in that it conforms to expectations regarding various psychographic constructs and various food-related behaviors. Convenience orientation was found to be negatively related to cooking enjoyment, involvement with food products and variety seeking, and to be positively related to role overload. The analyses also suggest that the lack of relation between the meal preparer's working status and convenience food consumption, as found in many studies, is due to convenience food not offering enough preparation convenience. Consuming take-away meals and eating in restaurants appear to satisfy the consumer's need for convenience more adequately. Copyright 2001 Academic Press.

Unified hatch system

NASA Technical Reports Server (NTRS)

Hart, R. J.; Walkover, L. J.; Zosky, E. W.

1971-01-01

Special hatch sealing mechanism design increases safety, reliability, and convenience. Adaptations are possible for oceanographic and high-speed aircraft design, or for any system where quick-opening pressure hatch is required. In normal mode, hatching mechanism is manually operated from either side.

Understanding Resource Allocation in High Schools.

ERIC Educational Resources Information Center

Hartman, William T.

Despite commonly held views concerning educators' rational decision-making behavior, there are competing interpretations of school personnels' objective, actions, and decision-making processes. Alternative explanations emphasize bureaucratic routine, administrative convenience, educator self-interest, and political motivations, rather than…

Development of an Inhaled Dry-Powder Formulation of Tobramycin Using PulmoSphere™ Technology

PubMed Central

Weers, Jeffry; Heuerding, Silvia

2011-01-01

Abstract At present, the only approved inhaled antipseudomonal antibiotics for chronic pulmonary infections in patients with cystic fibrosis (CF) are nebulized solutions. However, prolonged administration and cleaning times, high administration frequency, and cumbersome delivery technologies with nebulizers add to the high treatment burden in this patient population. PulmoSphere™ technology is an emulsion-based spray-drying process that enables the production of light porous particle, dry-powder formulations, which exhibit improved flow and dispersion from passive dry powder inhalers. This review explores the fundamental characteristics of PulmoSphere technology, focusing on the development of a dry powder formulation of tobramycin for the treatment of chronic pulmonary Pseudomonas aeruginosa (Pa) infection in CF patients. This dry powder formulation provides substantially improved intrapulmonary deposition efficiency, faster delivery, and more convenient administration over nebulized formulations. The availability of more efficient and convenient treatment options may improve treatment compliance, and thereby therapeutic outcomes in CF. PMID:21395432

Single-cell isolation by a modular single-cell pipette for RNA-sequencing.

PubMed

Zhang, Kai; Gao, Min; Chong, Zechen; Li, Ying; Han, Xin; Chen, Rui; Qin, Lidong

2016-11-29

Single-cell transcriptome sequencing highly requires a convenient and reliable method to rapidly isolate a live cell into a specific container such as a PCR tube. Here, we report a modular single-cell pipette (mSCP) consisting of three modular components, a SCP-Tip, an air-displacement pipette (ADP), and ADP-Tips, that can be easily assembled, disassembled, and reassembled. By assembling the SCP-Tip containing a hydrodynamic trap, the mSCP can isolate single cells from 5-10 cells per μL of cell suspension. The mSCP is compatible with microscopic identification of captured single cells to finally achieve 100% single-cell isolation efficiency. The isolated live single cells are in submicroliter volumes and well suitable for single-cell PCR analysis and RNA-sequencing. The mSCP possesses merits of convenience, rapidness, and high efficiency, making it a powerful tool to isolate single cells for transcriptome analysis.

Versatile Tri(pyrazolyl)phosphanes as Phosphorus Precursors for the Synthesis of Highly Emitting InP/ZnS Quantum Dots.

PubMed

Panzer, René; Guhrenz, Chris; Haubold, Danny; Hübner, René; Gaponik, Nikolai; Eychmüller, Alexander; Weigand, Jan J

2017-11-13

Tri(pyrazolyl)phosphanes (5 R1,R2 ) are utilized as an alternative, cheap and low-toxic phosphorus source for the convenient synthesis of InP/ZnS quantum dots (QDs). From these precursors, remarkably long-term stable stock solutions (>6 months) of P(OLA) 3 (OLAH=oleylamine) are generated from which the respective pyrazoles are conveniently recovered. P(OLA) 3 acts simultaneously as phosphorus source and reducing agent in the synthesis of highly emitting InP/ZnS core/shell QDs. These QDs are characterized by a spectral range between 530-620 nm and photoluminescence quantum yields (PL QYs) between 51-62 %. A proof-of-concept white light-emitting diode (LED) applying the InP/ZnS QDs as a color-conversion layer was built to demonstrate their applicability and processibility. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Low density lipoprotein for oxidation and metabolic studies. Isolation from small volumes of plasma using a tabletop ultracentrifuge.

PubMed

Himber, J; Bühler, E; Moll, D; Moser, U K

1995-01-01

A rapid method is described for the isolation of small volumes of plasma low density lipoprotein (LDL) free of plasma protein contaminants using the TL-100 Tabletop Ultracentrifuge (Beckman). The isolation of LDL was achieved by a 25 min discontinuous gradient density centrifugation between the density range of 1.006 and 1.21 g/ml, recovery of LDL by tube slicing followed by a 90 min flotation step (d = 1.12 g/ml). The purity of LDL and apolipoprotein B100 (apo B100) were monitored by agarose electrophoresis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), radial immunodiffusion and micropreparative fast protein liquid chromatography (FPLC). The ability of LDL oxidation was assessed by following absorbance at 234 nm after addition of copper ions. The functional integrity of the isolated LDL was checked by clearance kinetics after injection of [125I]-labelled LDL in estrogen-treated rats. The additional purification step led to LDL fractions free of protein contamination and left apo B100, alpha-tocopherol and beta-carotene intact. The LDL prepared in this way was free of albumin, as evident from analytic tests and from its enhanced oxidative modification by copper ions. Used for analytical purposes, this method allows LDL preparations from plasma volumes up to 570 microliters. This method is also convenient for metabolic studies in small animals, especially those relating to the determination of kinetic parameters of LDL in which LDL-apo B100 has to be specifically radiolabelled.

Using titanium LPW-TI64-GD23-TYPE5 in the individual contour grafting of bone defects with 3D implants

NASA Astrophysics Data System (ADS)

Bazlov, V. A.; Mamuladze, T. Z.; Pavlov, V. V.; Prohorenko, V. M.; Sadovoy, M. A.; Fomichev, N. G.; Efimenko, M. V.; Mamonova, E. V.; Aronov, A. M.

2017-09-01

The paper proposed a method of replacement of bone defects of a basin with individual 3D-printed implants of medical titanium LPW-TI64-GD23-TYPE5 ASTM F136. The design of the implant was carried out in view of determining the density of the surrounding bone tissue by Hounsfield's scale. We used the method of volume printing by type multiselecting laser sintering. A clinical example of using the method of individual contouring of the defect of bones of a basin with the assessment of bone density by Hounsfield's scale was given. The method of individual contouring of the defect of the basin bones with the assessment of bone density by Hounsfield's scale enables the surgeon to more accurately determine the tactics of surgical intervention: opting for bone grafting or the use of augmented. In the case of manufacturing an individual 3D augment, this method gives the possibility to adjust its geometry taking into account the density of the bone tissue, thereby giving it additional stability. If there is a need for screws—we can preadjust the length and direction of stroke so that the main part of the screw might pass in the support ability area of the bone tissue. We believe that the software and the approach to preoperative planning we have used can make surgery more convenient for the surgeon and personnel of the medical institution.

Does food vendor density mediate the association between neighborhood deprivation and BMI?: a G-computation mediation analysis.

PubMed

Zhang, Y Tara; Laraia, Barbara A; Mujahid, Mahasin S; Tamayo, Aracely; Blanchard, Samuel D; Warton, E Margaret; Kelly, N Maggi; Moffet, Howard H; Schillinger, Dean; Adler, Nancy; Karter, Andrew J

2015-05-01

In previous research, neighborhood deprivation was positively associated with body mass index (BMI) among adults with diabetes. We assessed whether the association between neighborhood deprivation and BMI is attributable, in part, to geographic variation in the availability of healthful and unhealthful food vendors. Subjects were 16,634 participants of the Diabetes Study of Northern California, a multiethnic cohort of adults living with diabetes. Neighborhood deprivation and healthful (supermarket and produce) and unhealthful (fast food outlets and convenience stores) food vendor kernel density were calculated at each participant's residential block centroid. We estimated the total effect, controlled direct effect, natural direct effect, and natural indirect effect of neighborhood deprivation on BMI. Mediation effects were estimated using G-computation, a maximum likelihood substitution estimator of the G-formula that allows for complex data relations such as multiple mediators and sequential causal pathways. We estimated that if neighborhood deprivation was reduced from the most deprived to the least deprived quartile, average BMI would change by -0.73 units (95% confidence interval: -1.05, -0.32); however, we did not detect evidence of mediation by food vendor density. In contrast to previous findings, a simulated reduction in neighborhood deprivation from the most deprived to the least deprived quartile was associated with dramatic declines in both healthful and unhealthful food vendor density. Availability of food vendors, both healthful and unhealthful, did not appear to explain the association between neighborhood deprivation and BMI in this population of adults with diabetes.

Laser heating challenges of high yield MagLIF targets

NASA Astrophysics Data System (ADS)

Slutz, Stephen; Sefkow, Adam; Vesey, Roger

2014-10-01

The MagLIF (Magnetized Liner Inertial Fusion) concept is predicted by numerical simulation to produce fusion yields of about 100 kJ, when driven by 25 MA from the existing Z accelerator [S. A. Slutz et al. Phys. Plasmas 17, 056303 (2010)] and much higher yields with future accelerators delivering higher currents [Slutz and Vesey PRL 108, 025003 (2012)]. The fuel must be heated before compression to obtain significant fusion yields due to the relatively slow implosion velocities (~ 100 km/s) of magnetically driven liners. Lasers provide a convenient means to accomplish this pre-compressional heating of the fusion fuel, but there are challenges. The laser must penetrate a foil covering the laser entrance hole and deposit 20-30 kJ within the ~1 cm length of the liner in fuel at 6-12 mg/cc. Such high densities could result in beam scattering due to refraction and laser plasma interactions. Numerical simulations of the laser heating process are presented, which indicate that energies as high as 30 kJ could be deposited in the fuel by using two laser pulses of different wavelengths. Simulations of this process will be presented as well of results for a MagLIF design for a potential new machine delivering 50 MA of current. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.

Bivariate Rainfall and Runoff Analysis Using Shannon Entropy Theory

NASA Astrophysics Data System (ADS)

Rahimi, A.; Zhang, L.

2012-12-01

Rainfall-Runoff analysis is the key component for many hydrological and hydraulic designs in which the dependence of rainfall and runoff needs to be studied. It is known that the convenient bivariate distribution are often unable to model the rainfall-runoff variables due to that they either have constraints on the range of the dependence or fixed form for the marginal distributions. Thus, this paper presents an approach to derive the entropy-based joint rainfall-runoff distribution using Shannon entropy theory. The distribution derived can model the full range of dependence and allow different specified marginals. The modeling and estimation can be proceeded as: (i) univariate analysis of marginal distributions which includes two steps, (a) using the nonparametric statistics approach to detect modes and underlying probability density, and (b) fitting the appropriate parametric probability density functions; (ii) define the constraints based on the univariate analysis and the dependence structure; (iii) derive and validate the entropy-based joint distribution. As to validate the method, the rainfall-runoff data are collected from the small agricultural experimental watersheds located in semi-arid region near Riesel (Waco), Texas, maintained by the USDA. The results of unviariate analysis show that the rainfall variables follow the gamma distribution, whereas the runoff variables have mixed structure and follow the mixed-gamma distribution. With this information, the entropy-based joint distribution is derived using the first moments, the first moments of logarithm transformed rainfall and runoff, and the covariance between rainfall and runoff. The results of entropy-based joint distribution indicate: (1) the joint distribution derived successfully preserves the dependence between rainfall and runoff, and (2) the K-S goodness of fit statistical tests confirm the marginal distributions re-derived reveal the underlying univariate probability densities which further assure that the entropy-based joint rainfall-runoff distribution are satisfactorily derived. Overall, the study shows the Shannon entropy theory can be satisfactorily applied to model the dependence between rainfall and runoff. The study also shows that the entropy-based joint distribution is an appropriate approach to capture the dependence structure that cannot be captured by the convenient bivariate joint distributions. Joint Rainfall-Runoff Entropy Based PDF, and Corresponding Marginal PDF and Histogram for W12 Watershed The K-S Test Result and RMSE on Univariate Distributions Derived from the Maximum Entropy Based Joint Probability Distribution;

Robotic voltammetry with carbon nanotube-based sensors: a superb blend for convenient high-quality antimicrobial trace analysis

PubMed Central

Theanponkrang, Somjai; Suginta, Wipa; Weingart, Helge; Winterhalter, Mathias; Schulte, Albert

2015-01-01

A new automated pharmacoanalytical technique for convenient quantification of redox-active antibiotics has been established by combining the benefits of a carbon nanotube (CNT) sensor modification with electrocatalytic activity for analyte detection with the merits of a robotic electrochemical device that is capable of sequential nonmanual sample measurements in 24-well microtiter plates. Norfloxacin (NFX) and ciprofloxacin (CFX), two standard fluoroquinolone antibiotics, were used in automated calibration measurements by differential pulse voltammetry (DPV) and accomplished were linear ranges of 1–10 μM and 2–100 μM for NFX and CFX, respectively. The lowest detectable levels were estimated to be 0.3±0.1 μM (n=7) for NFX and 1.6±0.1 μM (n=7) for CFX. In standard solutions or tablet samples of known content, both analytes could be quantified with the robotic DPV microtiter plate assay, with recoveries within ±4% of 100%. And recoveries were as good when NFX was evaluated in human serum samples with added NFX. The use of simple instrumentation, convenience in execution, and high effectiveness in analyte quantitation suggest the merger between automated microtiter plate voltammetry and CNT-supported electrochemical drug detection as a novel methodology for antibiotic testing in pharmaceutical and clinical research and quality control laboratories. PMID:25670899

Subcellular fractionation on Percoll gradient of mossy fiber synaptosomes: morphological and biochemical characterization in control and degranulated rat hippocampus.

PubMed

Taupin, P; Zini, S; Cesselin, F; Ben-Ari, Y; Roisin, M P

1994-04-01

A method for preparation of hippocampal mossy fiber synaptosomes directly from the postnuclear pellet is presented. This method represents an adaptation of that previously described for the isolation of synaptosomes by centrifugation through Percoll gradients directly from the supernatant fraction. We have characterized by electron microscopy two fractions, PII and PIII, enriched in mossy fiber synaptosomes; fraction PIII had 75% mossy fiber synaptosomes with well-preserved morphology (large size 3 microns, complex morphology, high synaptic vesicle density, multisynapses), whereas fraction PII contained 12%. These fractions were enriched in lactate dehydrogenase activity indicating that the integrity of synaptosomes was preserved. Compared with the other synaptosomal fractions, these fractions showed greater levels of dynorphin A (1-8) immunoreactivity and endogenous zinc, which are particularly concentrated in hippocampal mossy fiber terminals. Furthermore, we prepared synaptosomes from adult hippocampus after neonatal irradiation, which destroys the majority of granule cells and associated mossy fibers. The levels of dynorphin and zinc decreased by 88 and 70% in fraction PII and by 95 and 90%, respectively, in PIII. These results suggest that the rapid Percoll procedure is convenient for the purification of mossy fiber synaptosomes.

Degree of adaptive response in urban tolerant birds shows influence of habitat-of-origin

PubMed Central

2014-01-01

Urban exploiters and adapters are often coalesced under a term of convenience as ‘urban tolerant’. This useful but simplistic characterisation masks a more nuanced interplay between and within assemblages of birds that are more or less well adapted to a range of urban habitats. I test the hypotheses that objectively-defined urban exploiter and suburban adapter assemblages within the broad urban tolerant grouping in Melbourne vary in their responses within the larger group to predictor variables, and that the most explanatory predictor variables vary between the two assemblages. A paired, partitioned analysis of exploiter and adapter preferences for points along the urban–rural gradient was undertaken to decompose the overall trend into diagnosable parts for each assemblage. In a similar way to that in which time since establishment has been found to be related to high urban densities of some bird species and biogeographic origin predictive of urban adaptation extent, habitat origins of members of bird assemblages influence the degree to which they become urban tolerant. Bird species that objectively classify as urban tolerant will further classify as either exploiters or adapters according to the degree of openness of their habitats-of-origin. PMID:24688881

Parameter identification of JONSWAP spectrum acquired by airborne LIDAR

NASA Astrophysics Data System (ADS)

Yu, Yang; Pei, Hailong; Xu, Chengzhong

2017-12-01

In this study, we developed the first linear Joint North Sea Wave Project (JONSWAP) spectrum (JS), which involves a transformation from the JS solution to the natural logarithmic scale. This transformation is convenient for defining the least squares function in terms of the scale and shape parameters. We identified these two wind-dependent parameters to better understand the wind effect on surface waves. Due to its efficiency and high-resolution, we employed the airborne Light Detection and Ranging (LIDAR) system for our measurements. Due to the lack of actual data, we simulated ocean waves in the MATLAB environment, which can be easily translated into industrial programming language. We utilized the Longuet-Higgin (LH) random-phase method to generate the time series of wave records and used the fast Fourier transform (FFT) technique to compute the power spectra density. After validating these procedures, we identified the JS parameters by minimizing the mean-square error of the target spectrum to that of the estimated spectrum obtained by FFT. We determined that the estimation error is relative to the amount of available wave record data. Finally, we found the inverse computation of wind factors (wind speed and wind fetch length) to be robust and sufficiently precise for wave forecasting.

nMoldyn: a program package for a neutron scattering oriented analysis of molecular dynamics simulations.

PubMed

Róg, T; Murzyn, K; Hinsen, K; Kneller, G R

2003-04-15

We present a new implementation of the program nMoldyn, which has been developed for the computation and decomposition of neutron scattering intensities from Molecular Dynamics trajectories (Comp. Phys. Commun 1995, 91, 191-214). The new implementation extends the functionality of the original version, provides a much more convenient user interface (both graphical/interactive and batch), and can be used as a tool set for implementing new analysis modules. This was made possible by the use of a high-level language, Python, and of modern object-oriented programming techniques. The quantities that can be calculated by nMoldyn are the mean-square displacement, the velocity autocorrelation function as well as its Fourier transform (the density of states) and its memory function, the angular velocity autocorrelation function and its Fourier transform, the reorientational correlation function, and several functions specific to neutron scattering: the coherent and incoherent intermediate scattering functions with their Fourier transforms, the memory function of the coherent scattering function, and the elastic incoherent structure factor. The possibility to compute memory function is a new and powerful feature that allows to relate simulation results to theoretical studies. Copyright 2003 Wiley Periodicals, Inc. J Comput Chem 24: 657-667, 2003

Energy band gap and spectroscopic studies in Mn{sub 1-x}Cu{sub x}WO{sub 4} (0 ≤ x ≤ 0.125)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mal, Priyanath; Rambabu, P.; Turpu, G. R.

2016-05-06

A study on the effect of nonmagnetic Cu{sup 2+} substitution at Mn{sup 2+} site on the structural and energy band gap of the MnWO{sub 4} is reported. Convenient solid state reaction route has been adopted for the synthesis of Mn{sub 1-x}Cu{sub x}WO{sub 4}. X-ray diffraction (XRD) pattern showed high crystalline quality of the prepared samples. Raman spectroscopic studies were carried out to understand the structural aspects of the doping. 15 Raman active modes were identified out of 18, predicted for wolframite type monoclinic structure of MnWO{sub 4}. UV-visible diffuse reflectance spectra were recorded and analyzed to get energy band gapmore » of the studied system and are found in the range of 2.5 eV to 2.04 eV with a systematic decrease with the increase in Cu{sup 2+} concentration. Energy band gap values are verified by Density Functional Theory calculations based on projector augmented wave (PAW) method. The calculated values are in good agreement with the experimental data.« less

Magnetron sputtering in the creation of photonic nanostructures derived from Sasakia Charonda Formosana-butterfly wings for applied in dye-sensitized solar cells

NASA Astrophysics Data System (ADS)

Niu, Haihong; Zhou, Ru; Cheng, Cong; Zhang, Gonghai; Hu, Yu; Huang, Bin; Zhang, Shouwei; Shang, Xin; Xia, Mei; Xu, Jinzhang

2016-09-01

Creating new functional materials derived from the structures seen on butterfly wings has achieved interest in a variety of research topics. However, there need a concision approach could result in a high-quality, precise, and convenient process for the fabrication of complex nanostructures replication with unique functionalities based on the butterfly wings. Here we developed a pithy approach based on a magnetron sputtering metal Ti process for biotemplating used to refine hierarchically porous titanium dioxide photonic crystal nanostructures (TiO2sbnd PCN), themselves derived from nanostructures present on the wings of Sasakia Charonda Formosana (S. Charonda) butterflies. For the first time, the TiO2sbnd PCN were deposited on the top of the P25 active layer and were used to fabricate DSSCs as the light-scattering layers of photoanodes with power conversion efficiencies of up to 8.7%. Remarkably, a much enhanced photocurrent density and a prominent photoelectrochemical conversion capability have been achieved, which are exceeding most of the previously reported photoanodes as well as a similar butterflies replication-based device structure. Our study suggests many exciting opportunities of developing artificially engineered butterfly wing-based solar-to-fuel conversion.

Magnetic Stirling cycles - A new application for magnetic materials

NASA Technical Reports Server (NTRS)

Brown, G. V.

1977-01-01

There is the prospect of a fundamental new application for magnetic materials as the working substance in thermodynamic cycles. Recuperative cycles which use a rare-earth ferromagnetic material near its Curie point in the field of a superconducting magnet appear feasible for applications from below 20 K to above room temperature. The elements of the cycle, advanced in an earlier paper, are summarized. The basic advantages include high entropy density in the magnetic material, completely reversible processes, convenient control of the entropy by the applied field, the feature that heat transfer is possible during all processes, and the ability of the ideal cycle to attain Carnot efficiency. The mean field theory is used to predict the entropy of a ferromagnet in an applied field and also the isothermal entropy change and isentropic temperature change caused by applying a field. Results are presented for J = 7/2 and g = 2. The results for isentropic temperature change are compared with experimental data on Gd. Coarse mixtures of ferromagnetic materials with different Curie points are proposed to modify the path of the cycle in the T-S diagram in order to improve the efficiency or to increase the specific power.

Robust and efficient fiducial tracking for augmented reality in HD-laparoscopic video streams

NASA Astrophysics Data System (ADS)

Mueller, M.; Groch, A.; Baumhauer, M.; Maier-Hein, L.; Teber, D.; Rassweiler, J.; Meinzer, H.-P.; Wegner, In.

2012-02-01

Augmented Reality (AR) is a convenient way of porting information from medical images into the surgical field of view and can deliver valuable assistance to the surgeon, especially in laparoscopic procedures. In addition, high definition (HD) laparoscopic video devices are a great improvement over the previously used low resolution equipment. However, in AR applications that rely on real-time detection of fiducials from video streams, the demand for efficient image processing has increased due to the introduction of HD devices. We present an algorithm based on the well-known Conditional Density Propagation (CONDENSATION) algorithm which can satisfy these new demands. By incorporating a prediction around an already existing and robust segmentation algorithm, we can speed up the whole procedure while leaving the robustness of the fiducial segmentation untouched. For evaluation purposes we tested the algorithm on recordings from real interventions, allowing for a meaningful interpretation of the results. Our results show that we can accelerate the segmentation by a factor of 3.5 on average. Moreover, the prediction information can be used to compensate for fiducials that are temporarily occluded or out of scope, providing greater stability.

Artificial pancreas (AP) clinical trial participants' acceptance of future AP technology.

PubMed

Bevier, Wendy C; Fuller, Serena M; Fuller, Ryan P; Rubin, Richard R; Dassau, Eyal; Doyle, Francis J; Jovanovič, Lois; Zisser, Howard C

2014-09-01

Artificial pancreas (AP) systems are currently an active field of diabetes research. This pilot study examined the attitudes of AP clinical trial participants toward future acceptance of the technology, having gained firsthand experience. After possible influencers of AP technology adoption were considered, a 34-question questionnaire was developed. The survey assessed current treatment satisfaction, dimensions of clinical trial participant motivation, and variables of the technology acceptance model (TAM). Forty-seven subjects were contacted to complete the survey. The reliability of the survey scales was tested using Cronbach's α. The relationship of the factors to the likelihood of AP technology adoption was explored using regression analysis. Thirty-six subjects (76.6%) completed the survey. Of the respondents, 86.1% were either highly likely or likely to adopt the technology once available. Reliability analysis of the survey dimensions revealed good internal consistency, with scores of >0.7 for current treatment satisfaction, convenience (motivation), personal health benefit (motivation), perceived ease of use (TAM), and perceived usefulness (TAM). Linear modeling showed that future acceptance of the AP was significantly associated with TAM and the motivation variables of convenience plus the individual item benefit to others (R(2)=0.26, P=0.05). When insulin pump and continuous glucose monitor use were added, the model significance improved (R(2)=0.37, P=0.02). This pilot study demonstrated that individuals with direct AP technology experience expressed high likelihood of future acceptance. Results support the factors of personal benefit, convenience, perceived usefulness, and perceived ease of use as reliable scales that suggest system adoption in this highly motivated patient population.

Food-choice motives of adolescents in Jakarta, Indonesia: the roles of gender and family income.

PubMed

Maulida, Rizka; Nanishi, Keiko; Green, Joseph; Shibanuma, Akira; Jimba, Masamine

2016-10-01

The aims of the present study were to assess the reliability and validity of the Food Choice Questionnaire (FCQ) and to determine the factors associated with food-choice motives in public junior-high-school students in Jakarta, Indonesia. Cross-sectional study with self-administered questionnaires. Trained research assistants measured height and weight of the participants on the day of the data collection. Settings Fourteen randomly selected public junior-high schools in East Jakarta, Indonesia. Public junior-high-school students (n 681) in grades 7 and 8, aged 13-14 years (377 girls and 304 boys). Three food-choice motives (subscales) were obtained from factor analysis and reliability testing: (i) comfort; (ii) convenience and price; and (iii) health. The subscale with the greatest mean value was health. Family affluence was inversely associated with the convenience and price subscale (β=-0·05, P=0·01) and with the health subscale (β=-0·04; P=0·02). Females were less likely than males to consider health when choosing foods (β=-0·16; P=0·03). While its factor structure differed from those found in previous studies of adults, the FCQ can provide reliable measures of food-choice motives among these adolescents. Students from less affluent families placed more importance on food's convenience and price, but more affluent students did not necessarily make healthier choices. Compared with females, males were more likely to choose healthy foods. Future interventions should be tailored based on the socio-economic status of the target group.

Patient assessment of onset of action and overall satisfaction with ebastine fast-dissolving tablets in allergic rhinitis.

PubMed

Roger, Albert; Fortea, Josep; Mora, Sheila; Artés, Maite

2008-08-01

To evaluate patient perception of the onset of action and overall satisfaction with a fast-dissolving tablet (FDT) formulation of ebastine in patients with intermittent or persistent allergic rhinitis. This was a cross-sectional, multicenter, pharmacy-based survey involving adult patients (>18 years) with allergic rhinitis who presented with a prescription for ebastine FDT. Via a telephone interview, patients were asked to evaluate the characteristics of ebastine FDT in comparison with their previous experience with other antihistamines. 100 patients with allergic rhinitis were included in the study (41 had intermittent disease, 57 persistent disease and two with unknown disease states). Patients rated ebastine FDT very highly (mean scores: 4.5-4.7 out of a possible 5) for all characteristics related to convenience, such as easy to take, easy to carry around in a bag or pocket, suitable for taking anytime/anywhere, and convenient to use. A total of 85% of patients perceived ebastine FDTs onset of action to be fast or very fast, and 77% indicated that it acted faster than their usual antihistamine. A total of 96% were satisfied or very satisfied with ebastine FDT and 98% were interested in using the drug again. Patients with rhinitis rate ebastine FDT very highly in terms of its formulation, convenience of use and its rapid onset of action. These characteristics resulted in a high level of individual satisfaction with the new formulation and a clear preference by the majority of patients to use ebastine FDT in the future.

Fast and compact internal scanning CMOS-based hyperspectral camera: the Snapscan

NASA Astrophysics Data System (ADS)

Pichette, Julien; Charle, Wouter; Lambrechts, Andy

2017-02-01

Imec has developed a process for the monolithic integration of optical filters on top of CMOS image sensors, leading to compact, cost-efficient and faster hyperspectral cameras. Linescan cameras are typically used in remote sensing or for conveyor belt applications. Translation of the target is not always possible for large objects or in many medical applications. Therefore, we introduce a novel camera, the Snapscan (patent pending), exploiting internal movement of a linescan sensor enabling fast and convenient acquisition of high-resolution hyperspectral cubes (up to 2048x3652x150 in spectral range 475-925 nm). The Snapscan combines the spectral and spatial resolutions of a linescan system with the convenience of a snapshot camera.

Corrosion Testing of 304L SS 3013 Inner Container and Teardrop Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokash, Justin Charles; Hill, Mary Ann; Lillard, Scott

The Department of Energy (DOE) 3013 Standard specifies a minimum of two containers to be used for the storage of plutonium-bearing materials containing at least 30 wt.% plutonium and uranium. Three nested containers are typically used, the outer, inner, and convenience containers, shown in Figure 1. Both the outer and inner containers are sealed with a weld while the innermost convenience container must not be sealed. Lifetime of the containers is expected to be fifty years. The containers are fabricated of austenitic stainless steels (SS) due to their high corrosion resistance. Potential failure mechanisms of the storage containers have beenmore » examined by Kolman and Lillard et al.« less

Obesity and the food system transformation in Latin America.

PubMed

Popkin, B M; Reardon, T

2018-04-24

The Latin America and the Caribbean (LAC) region faces a major diet-related health problem accompanied by enormous economic and social costs. The shifts in diet are profound: major shifts in intake of less-healthful low-nutrient-density foods and sugary beverages, changes in away-from-home eating and snacking and rapid shifts towards very high levels of overweight and obesity among all ages along with, in some countries, high burdens of stunting. Diet changes have occurred in parallel to, and in two-way causality with, changes in the broad food system - the set of supply chains from farms, through midstream segments of processing, wholesale and logistics, to downstream segments of retail and food service (restaurants and fast food chains). An essential contribution of this piece is to marry and integrate the nutrition transition literature with the literature on the economics of food system transformation. These two literatures and debates have been to date largely 'two ships passing in the night'. This review documents in-depth the recent history of rapid growth and transformation of that broad food system in LAC, with the rapid rise of supermarkets, large processors, fast food chains and food logistics firms. The transformation is the story of a 'double-edged sword', showing its links to various negative diet side trends, e.g. the rise of consumption of fast food and highly processed food, as well as in parallel, to various positive trends, e.g. the reduction of the cost of food, de-seasonalization, increase of convenience of food preparation reducing women's time associated with that and increase of availability of some nutritious foods like meat and dairy. We view the transformation of the food system, as well as certain aspects of diet change linked to long-run changes in employment and demographics (e.g. the quest for convenience), as broad parameters that will endure for the next decades without truly major regulatory and fiscal changes. We then focus in on what are the steps that are being and can be taken to curb the negative effects on diet of these changes. We show that countries in LAC are already among the global leaders in initiating demand-related solutions via taxation and marketing controls. But we also show that this is only a small step forward. To shift LAC's food supply towards prices that incentivize consumption of healthier diets and demand away from the less healthy component is not simple and will not happen immediately. We must be cognizant that ultimately, food industry firms must be incentivized to market the components of healthy diets. This will primarily need to be via selective taxes and subsidies, marketing controls, as well as food quality regulations, consumer education and, in the medium term, consumers' desires to combine healthier foods with their ongoing quest for convenience in the face of busy lives. In the end, the food industry in LAC will orient itself towards profitable solutions, ie those demanded by the broad mass of consumers. © 2018 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of World Obesity Federation.

An improved kilogram-scale preparation of atorvastatin calcium.

PubMed

Novozhilov, Yuri V; Dorogov, Mikhail V; Blumina, Maria V; Smirnov, Alexey V; Krasavin, Mikhail

2015-01-01

If literature protocols are followed, conversion of an advanced ketal ester intermediate (available in kilogram quantities via a published Paal-Knorr synthesis) to cholesterol-lowering drug atorvastatin calcium is hampered by several process issues, particularly at the final stage where the hemi-calcium salt is obtained. We developed a high-yielding synthesis of atorvastatin calcium salt on 7 kg scale that affords >99.5% product purities by introducing the following key improvements: i. isolating the pure product of the ketal deprotection step as crystalline solid, and ii. using a convenient ethyl acetate extraction procedure to isolate the pure atorvastatin calcium at the ester hydrolysis and counter-ion exchange step. The convenient and operationally simple conversion of an advanced intermediate of atorvastatin to the clinically used hemi-calcium salt form of the drug that is superior to the methods obtainable from the literature is now available to facilitate the production of atorvastatin calcium on industrial scale. Graphical abstractStepwise ketal and tert-butyl ester group hydrolysis and a modified work-up protocol lead to a more convenient preparation of API-grade atorvastatin calcium.

Convenience foods. What, why, and when.

PubMed

Scholliers, Peter

2015-11-01

An attempt is made to assess the academic interest in convenience foods in the past decades in order to introduce this special section on historical dimensions of convenience foods, prepared by FOST, a unit that investigates the history and culture of food (up to today). First, the rise of academic interest is trailed since the appearance of the concept in the 1920s and, next, themes in connection to this interest are considered (e.g., time, health, or gender). Then, definitions of convenience foods are tracked since the 1950s, which leads to suggesting a clear focus (linking convenience foods to home cooking of meals and industrially produced foods). The conclusion stresses the changing definition of the concept, as well as the need to gain historical insight in present-day issues related to convenience foods. Copyright © 2015 Elsevier Ltd. All rights reserved.

A comparison of DNA compaction by arginine and lysine peptides: A physical basis for arginine rich protamines

PubMed Central

DeRouchey, Jason; Hoover, Brandon

2013-01-01

Protamines are small, highly positively charged peptides used to package DNA to very high densities in sperm nuclei. Tight DNA packing is considered essential to minimize DNA damage by mutagens and reactive oxidizing species. A striking and general feature of protamines is the almost exclusive use of arginine over lysine for the positive charge to neutralize DNA. We have investigated whether this preference for arginine might arise from a difference in DNA condensation by arginine and lysine peptides. The forces underlying DNA compaction by arginine, lysine, and ornithine peptides are measured using the osmotic stress technique coupled with x-ray scattering. The equilibrium spacings between DNA helices condensed by lysine and ornithine peptides are significantly larger than the interhelical distances with comparable arginine peptides. The DNA surface-to-surface separation, for example, is some 50% larger with poly-lysine compared to poly-arginine. DNA packing by lysine rich peptides in sperm nuclei would allow much greater accessibility to small molecules that could damage DNA. The larger spacing with lysine peptides is due to both a weaker attraction and a stronger short ranged repulsion relative to the arginine peptides. A previously proposed model for poly-arginine and protamine binding to DNA provides a convenient framework for understanding the differences between the ability of lysine and arginine peptides to assemble DNA. PMID:23540557

Self-consistent optimization of [111]-AlGaInAs/InP MQWs structures lasing at 1.55 μm by a genetic algorithm

NASA Astrophysics Data System (ADS)

Saidi, Hosni; Msahli, Melek; Ben Dhafer, Rania; Ridene, Said

2017-12-01

Band structure and optical gain properties of [111]-oriented AlGaInAs/AlGaInAs-delta-InGaAs multi-quantum wells, subjected to piezoelectric field, for the near-infrared lasers diodes applications was proposed and investigated in this paper. By using genetic algorithm based on optimization technique we demonstrate that the structural parameters can be conveniently optimized to achieve high-efficiency laser diode performance at room temperature. In this work, significant optical gain for the wished emission wavelength at 1.55 μm and low threshold injection current are the optimization target. The end result of this optimization is a laser diode based on InP substrate using quaternary compound material of AlGaInAs in both quantum wells and barriers with different composition. It has been shown that the transverse electric polarized optical gain which reaches 3500 cm-1 may be acquired for λ = 1.55 μm with a threshold carrier density Nth≈1.31018cm-3, which is very promising to serve as an alternative active region for high-efficiency near-infrared lasers. Finally, from the design presented here, we show that it is possible to apply this technique to a different III-V compound semiconductors and wavelength ranging from deep-ultra-violet to far infrared.

Engineering shadows to fabricate optical metasurfaces.

PubMed

Nemiroski, Alex; Gonidec, Mathieu; Fox, Jerome M; Jean-Remy, Philip; Turnage, Evan; Whitesides, George M

2014-11-25

Optical metasurfaces-patterned arrays of plasmonic nanoantennas that enable the precise manipulation of light-matter interactions-are emerging as critical components in many nanophotonic materials, including planar metamaterials, chemical and biological sensors, and photovoltaics. The development of these materials has been slowed by the difficulty of efficiently fabricating patterns with the required combinations of intricate nanoscale structure, high areal density, and/or heterogeneous composition. One convenient strategy that enables parallel fabrication of periodic nanopatterns uses self-assembled colloidal monolayers as shadow masks; this method has, however, not been extended beyond a small set of simple patterns and, thus, has remained incompatible with the broad design requirements of metasurfaces. This paper demonstrates a technique-shadow-sphere lithography (SSL)-that uses sequential deposition from multiple angles through plasma-etched microspheres to expand the variety and complexity of structures accessible by colloidal masks. SSL harnesses the entire, relatively unexplored, space of shadow-derived shapes and-with custom software to guide multiangled deposition-contains sufficient degrees of freedom to (i) design and fabricate a wide variety of metasurfaces that incorporate complex structures with small feature sizes and multiple materials and (ii) generate, in parallel, thousands of variations of structures for high-throughput screening of new patterns that may yield unexpected optical spectra. This generalized approach to engineering shadows of spheres provides a new strategy for efficient prototyping and discovery of periodic metasurfaces.

Lightweight, compressible and electrically conductive polyurethane sponges coated with synergistic multiwalled carbon nanotubes and graphene for piezoresistive sensors.

PubMed

Ma, Zhonglei; Wei, Ajing; Ma, Jianzhong; Shao, Liang; Jiang, Huie; Dong, Diandian; Ji, Zhanyou; Wang, Qian; Kang, Songlei

2018-04-19

Lightweight, compressible and highly sensitive pressure/strain sensing materials are highly desirable for the development of health monitoring, wearable devices and artificial intelligence. Herein, a very simple, low-cost and solution-based approach is presented to fabricate versatile piezoresistive sensors based on conductive polyurethane (PU) sponges coated with synergistic multiwalled carbon nanotubes (MWCNTs) and graphene. These sensor materials are fabricated by convenient dip-coating layer-by-layer (LBL) electrostatic assembly followed by in situ reduction without using any complicated microfabrication processes. The resultant conductive MWCNT/RGO@PU sponges exhibit very low densities (0.027-0.064 g cm-3), outstanding compressibility (up to 75%) and high electrical conductivity benefiting from the porous PU sponges and synergistic conductive MWCNT/RGO structures. In addition, the MWCNT/RGO@PU sponges present larger relative resistance changes and superior sensing performances under external applied pressures (0-5.6 kPa) and a wide range of strains (0-75%) compared with the RGO@PU and MWCNT@PU sponges, due to the synergistic effect of multiple mechanisms: "disconnect-connect" transition of nanogaps, microcracks and fractured skeletons at low compression strain and compressive contact of the conductive skeletons at high compression strain. The electrical and piezoresistive properties of MWCNT/RGO@PU sponges are strongly associated with the dip-coating cycle, suspension concentration, and the applied pressure and strain. Fully functional applications of MWCNT/RGO@PU sponge-based piezoresistive sensors in lighting LED lamps and detecting human body movements are demonstrated, indicating their excellent potential for emerging applications such as health monitoring, wearable devices and artificial intelligence.

Examining the concept of convenient collection: an application to extended producer responsibility and product stewardship frameworks.

PubMed

Wagner, Travis P

2013-03-01

Increasingly, Extended Producer Responsibility (EPR) and Product Stewardship (PS) frameworks are being adopted as a preferred policy approach to promote cost-effective diversion and recovery of post-consumer solid waste. Because the application of EPR/PS generally requires the creation of a separate and often parallel collection and/or management system, key to increasing the amount of waste recovered is to maximize the convenience of the collection system to maximize consumer participation. Convenient collection is often mandated in EPR/PS laws, however it is not defined. Convenience is a subjective construct rendering it extremely difficult to define. However, based on a dissection of post-consumer collection efforts under a generic EPR/PS system, this paper identifies and examines five categories of convenience - knowledge requirements, proximity to a collection site, opportunity to drop-off materials, the draw of the collection site, and the ease of the process-and the various factors of convenience within each of these categories. By using a simplified multiple criteria decision analysis, this paper proposes a performance matrix of criteria of convenience. Stakeholders can use this matrix to assist in the design, assessment, and/or implementation of a convenient post-consumer collection system under an EPR/PS framework. Copyright © 2012 Elsevier Ltd. All rights reserved.

Investigating the role of personal and context-related factors in convenience foods consumption.

PubMed

Contini, Caterina; Boncinelli, Fabio; Gerini, Francesca; Scozzafava, Gabriele; Casini, Leonardo

2018-07-01

In the scenario of food consumptions, we witness the consumer's growing consideration for the "convenience" attribute. Our study intends to understand the consumer behaviour towards convenience-processed foods by analysing in a single model the role of beliefs, personal traits, social influence and market availability. We applied a Structural Equation Model (SEM) to a representative sample of 426 Italian consumers. The results show a correlation between intention to consume convenience-processed foods and social influence, market availability and several personal traits, suggesting strategies for the development of the convenience food market. Copyright © 2018 Elsevier Ltd. All rights reserved.

Enhancing the Capacitive Performance of Electric Double-Layer Capacitors with Ionic Liquid Mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lian, C.; Liu, K.; Van Aken, Katherine L.

Formulating room-temperature ionic liquid (RTIL) mixed electrolytes was recently proposed as an effective and convenient strategy to increase the capacitive performance of electrochemical capacitors. In this paper, we investigate the electrical double-layer (EDL) structure and the capacitance of two RTILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF 4), and their mixtures with onion-like carbon electrodes using experiment and classical density functional theory. The principal difference between these ionic liquids is the smaller diameter of the BF 4 – anion relative to the TFSI – anion and the EMI + cation. A volcano-shaped trend is identified for the capacitance versus themore » composition of the RTIL mixture. The mixture effect, which makes more counterions pack on and more co-ions leave from the electrode surface, leads to an increase of the counterion density within the EDL and thus a larger capacitance. Finally, these theoretical predictions are in good agreement with our experimental observations and offer guidance for designing RTIL mixtures for EDL supercapacitors.« less

Radiation Transport in Random Media With Large Fluctuations

NASA Astrophysics Data System (ADS)

Olson, Aaron; Prinja, Anil; Franke, Brian

2017-09-01

Neutral particle transport in media exhibiting large and complex material property spatial variation is modeled by representing cross sections as lognormal random functions of space and generated through a nonlinear memory-less transformation of a Gaussian process with covariance uniquely determined by the covariance of the cross section. A Karhunen-Loève decomposition of the Gaussian process is implemented to effciently generate realizations of the random cross sections and Woodcock Monte Carlo used to transport particles on each realization and generate benchmark solutions for the mean and variance of the particle flux as well as probability densities of the particle reflectance and transmittance. A computationally effcient stochastic collocation method is implemented to directly compute the statistical moments such as the mean and variance, while a polynomial chaos expansion in conjunction with stochastic collocation provides a convenient surrogate model that also produces probability densities of output quantities of interest. Extensive numerical testing demonstrates that use of stochastic reduced-order modeling provides an accurate and cost-effective alternative to random sampling for particle transport in random media.

Universal MOSFET parameter analyzer

NASA Astrophysics Data System (ADS)

Klekachev, A. V.; Kuznetsov, S. N.; Pikulev, V. B.; Gurtov, V. A.

2006-05-01

MOSFET analyzer is developed to extract most important parameters of transistors. Instead of routine DC transfer and output characteristics, analyzer provides an evaluation of interface states density by applying charge pumping technique. There are two features that outperform the analyzer among similar products of other vendors. It is compact (100 × 80 × 50 mm 3 in dimensions) and lightweight (< 200 gram) instrument with ultra low power supply (< 2.5 W). The analyzer operates under control of IBM PC by means of USB interface that simultaneously provides power supply. Owing to the USB-compatible microcontroller as the basic element, designed analyzer offers cost-effective solution for diverse applications. The enclosed software runs under Windows 98/2000/XP operating systems, it has convenient graphical interface simplifying measurements for untrained user. Operational characteristics of analyzer are as follows: gate and drain output voltage within limits of +/-10V measuring current range of 1pA ÷ 10 mA; lowest limit of interface states density characterization of ~10 9 cm -2 • eV -1. The instrument was designed on the base of component parts from CYPRESS and ANALOG DEVICES (USA).

Enhancing the Capacitive Performance of Electric Double-Layer Capacitors with Ionic Liquid Mixtures

DOE PAGES

Lian, C.; Liu, K.; Van Aken, Katherine L.; ...

2016-04-18

Formulating room-temperature ionic liquid (RTIL) mixed electrolytes was recently proposed as an effective and convenient strategy to increase the capacitive performance of electrochemical capacitors. In this paper, we investigate the electrical double-layer (EDL) structure and the capacitance of two RTILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF 4), and their mixtures with onion-like carbon electrodes using experiment and classical density functional theory. The principal difference between these ionic liquids is the smaller diameter of the BF 4 – anion relative to the TFSI – anion and the EMI + cation. A volcano-shaped trend is identified for the capacitance versus themore » composition of the RTIL mixture. The mixture effect, which makes more counterions pack on and more co-ions leave from the electrode surface, leads to an increase of the counterion density within the EDL and thus a larger capacitance. Finally, these theoretical predictions are in good agreement with our experimental observations and offer guidance for designing RTIL mixtures for EDL supercapacitors.« less

Fundamental characteristics of input waste of small MSW incinerators in Korea.

PubMed

Choi, Ki-In; Lee, Suk-Hui; Lee, Dong-Hoon; Osako, Masahiro

2008-11-01

Waste incineration in a small incinerator is a simple and convenient way of treating waste discharged from small areas or from large facilities and buildings such as business centers, marketplaces, factories, and military units. Despite their ostensible advantages, however, many small incinerators frequently suffer from serious problems, e.g., unsystematic waste feeding, unstable combustion, deficient air pollution control devices, and consequently, environmental pollution. To obtain a better understanding of the characterization of wastes in small incinerators, we investigated a series of fundamental characteristics, i.e., physical composition, bulk density, proximate and ultimate analysis, potential energy content, and so on. The main waste components in small incinerators were identified as paper and plastic; the proportion of food waste was less than that in large incinerators. Especially, a low ratio of food waste had a strong influence on other waste characteristics, e.g., lower moisture content and bulk density, and higher potential energy. On the other hand, in contrast with that of HCl, there was no distinguishable linear relationship between Cl content in waste and PCDD/DF concentration in combustion gas.

Fabrication and physical evaluation of a polymer-encapsulated paramagnetic probe for biomedical oximetry

PubMed Central

Meenakshisundaram, Guruguhan; Eteshola, Edward; Pandian, Ramasamy P.; Bratasz, Anna; Kuppusamy, Periannan

2009-01-01

Lithium octa-n-butoxynaphthalocyanine (LiNc-BuO) is a promising probe for biological electron paramagnetic resonance (EPR) oximetry and is being developed for clinical use. However, clinical applicability of LiNc-BuO may be hindered by potential limitations associated with biocompatibility, biodegradation, and migration of individual crystals in tissue. To overcome these limitations, we have encapsulated LiNc-BuO crystals in polydimethyl siloxane (PDMS), an oxygen-permeable and bioinert polymer, to fabricate conveniently implantable and retrievable oxygen-sensing chips. Encapsulation was performed by a simple cast-molding process, giving appreciable control over size, shape, thickness and spin density of chips. The in vitro oxygen response of the chip was linear, reproducible, and not significantly different from that of unencapsulated crystals. Cast-molding of the structurally-flexible PDMS enabled the fabrication of chips with tailored spin densities, and ensured non-exposure of embedded LiNc-BuO, mitigating potential biocompatibility/toxicological concerns. Our results establish PDMS-encapsulated LiNc-BuO as a promising candidate for further biological evaluation and potential clinical application. PMID:19291409

Study of the Conditions of Irradiating Laser for Removal of Toner from Used Paper

NASA Astrophysics Data System (ADS)

Ihori, Haruo; Inagawa, Yuki; Ito, Naohiro; Fujii, Masaharu; Ninomiya, Hideki

Though it is said to the paper-less age with the spread of personal computer, amount of office papers to be used doesn't have tendency to decrease. In general, used papers are recovered and recycled in order to preserve the environment. The labor and costs are required for the recovery of used papers and a recycled paper is lower in quality. If we could reuse used papers repeatedly without withdrawing those, for example, by copying machine that could print again with removing toner on used paper, it is very convenient and ecological. So, we studied about removing toner from used papers by application of the laser ablation technique. As an optical source, SHG-YAG laser was chosen. For removal of toner from used papers, the energy density to irradiate them with SHG-YAG laser was examined. When approximately 12mJ/mm2 of the energy density, which was average value, toner was removed so much as to be able to reuse again. Moreover, conditions of the laser irradiation, concretely, the velocity scanning the laser and the number of the irradiation, were studied.

Removal of common organic solvents from aqueous waste streams via supercritical C02 extraction: a potential green approach to sustainable waste management in the pharmaceutical industry.

PubMed

Leazer, Johnnie L; Gant, Sean; Houck, Anthony; Leonard, William; Welch, Christopher J

2009-03-15

Supercritical CO2 extraction of aqueous streams is a convenient and effective method to remove commonly used solvents of varying polarities from aqueous waste streams. The resulting aqueous layers can potentially be sewered; whereas the organic layer can be recovered for potential reuse. Supercritical fluid extraction (SFE) is a technology that is increasingly being used in commercial processes (1). Supercritical fluids are well suited for extraction of a variety of media, including solids, natural products, and liquid products. Many supercritical fluids have low critical temperatures, allowing for extractions to be done at modestly low temperatures, thus avoiding any potential thermal decomposition of the solutes under study (2). Furthermore, the CO2 solvent strength is easily tuned by adjusting the density of the supercritical fluid (The density is proportional to the pressure of the extraction process). Since many supercritical fluids are gases at ambient temperature, the extract can be concentrated by simply venting the reaction mixture to a cyclone collection vessel, using appropriate safety protocols.

Salmonella diversity and burden in cows on and culled from dairy farms in the Texas High Plains

USDA-ARS?s Scientific Manuscript database

The objective of this study was to further characterize the epidemiology of Salmonella carried by dairy cows culled from herds in the Texas High Plains and marketed for human consumption. Feces were collected from 706 animals culled from a convenience sample of 9 dairies. In addition, individually...

Relationship of Mothers' Food Choice Criteria to Food Intake of Preschool Children: Identification of Family Subgroups.

ERIC Educational Resources Information Center

Contento, Isobel R.; And Others

1993-01-01

Data from 218 predominantly Latino mothers who rated 17 foods in terms of 10 attributes (e.g., appeal to child, convenient preparation) were sorted into family subgroups, from high health to high taste. Mothers' health knowledge correlated with children's nutrient intake. Interventions were planned to teach preparation of healthful foods that…

Impact of neighbourhood food environment on food consumption in children aged 9-10 years in the UK SPEEDY (Sport, Physical Activity and Eating behaviour: Environmental Determinants in Young people) study.

PubMed

Skidmore, Paula; Welch, Ailsa; van Sluijs, Esther; Jones, Andrew; Harvey, Ian; Harrison, Flo; Griffin, Simon; Cassidy, Aedín

2010-07-01

Poor diet in childhood increases risk of obesity but the relationship between access to food and children's food choice is underexplored. We determined relationships between distance to and density of food outlets on children's food choice. Children (n 1721) aged 9-10 years who participated in a cross-sectional study from a sample of state and private schools across urban and rural areas. Food consumption was reported using a short validated FFQ. A Geographic Information System was used to determine proximity to local food outlets. Multivariable regression analyses were performed to determine associations between food consumption and distance to and density of local food outlets. Norfolk, England. Boys (n 754) and girls (n 967) aged 9-10 years. The impact of distance to or density of food outlets on food choice was small after adjustment. Living further away from a supermarket increased portions of fruit (0.11 portions/week per 1 km increase in distance to nearest supermarket, P < 0.05) and vegetables (0.11 portions/week, P < 0.05) consumed. Living closer to convenience stores was also associated with an increased consumption of crisps, chocolate and white bread. Density of supermarkets was associated with both an increase in vegetable intake (0.31 portions/week, P < 0.05) and unhealthy foods. Distance to and density of food outlets are both associated with children's food choice, although the impact appears to be small and the relationship is complex. However, the effects of individual foods combined could be important, particularly as even small differences in intake can impact on body weight over time.

Dewetting and spreading transitions for active matter on random pinning substrates.

PubMed

Sándor, Cs; Libál, A; Reichhardt, C; Olson Reichhardt, C J

2017-05-28

We show that sterically interacting self-propelled disks in the presence of random pinning substrates exhibit transitions among a variety of different states. In particular, from a phase separated cluster state, the disks can spread out and homogeneously cover the substrate in what can be viewed as an example of an active matter wetting transition. We map the location of this transition as a function of activity, disk density, and substrate strength, and we also identify other phases including a cluster state, coexistence between a cluster and a labyrinth wetted phase, and a pinned liquid. Convenient measures of these phases include the cluster size, which dips at the wetting-dewetting transition, and the fraction of sixfold coordinated particles, which drops when dewetting occurs.

Floating potential in electronegative plasmas for non-zero ion temperatures

NASA Astrophysics Data System (ADS)

Regodón, Guillermo Fernando; Fernández Palop, José Ignacio; Tejero-del-Caz, Antonio; Díaz-Cabrera, Juan Manuel; Carmona-Cabezas, Rafael; Ballesteros, Jerónimo

2018-02-01

The floating potential of a Langmuir probe immersed in an electronegative plasma is studied theoretically under the assumption of radial positive ion fluid movement for non-zero positive ion temperature: both cylindrical and spherical geometries are studied. The model is solvable exactly. The special characteristics of the electronegative pre-sheath are found and the influence of the stratified electronegative pre-sheath is shown to be very small in practical applications. It is suggested that the use of the floating potential in the measurement of negative ions population density is convenient, in view of the numerical results obtained. The differences between the two radial geometries, which become very important for small probe radii of the order of magnitude of the Debye length, are studied.

On the Convenience of Using the Complete Linearization Method in Modelling the BLR of AGN

NASA Astrophysics Data System (ADS)

Patriarchi, P.; Perinotto, M.

The Complete Linearization Method (Mihalas, 1978) consists in the determination of the radiation field (at a set of frequency points), atomic level populations, temperature, electron density etc., by resolving the system of radiative transfer, thermal equilibrium, statistical equilibrium equations simultaneously and self-consistently. Since the system is not linear, it must be solved by iteration after linearization, using a perturbative method, starting from an initial guess solution. Of course the Complete Linearization Method is more time consuming than the previous one. But how great can this disadvantage be in the age of supercomputers? It is possible to approximately evaluate the CPU time needed to run a model by computing the number of multiplications necessary to solve the system.

The growth and in situ characterization of chemical vapor deposited SiO2

NASA Technical Reports Server (NTRS)

Iyer, R.; Chang, R. R.; Lile, D. L.

1987-01-01

This paper reports the results of studies of the kinetics of remote (indirect) plasma enhanced low pressure CVD growth of SiO2 on Si and InP and of the in situ characterization of the electrical surface properties of InP during CVD processing. In the latter case photoluminescence was employed as a convenient and sensitive noninvasive method for characterizing surface trap densities. It was determined that, provided certain precautions are taken, the growth of SiO2 occurs in a reproducible and systematic fashion that can be expressed in an analytic form useful for growth rate prediction. Moreover, the in situ photoluminescence studies have yielded information on sample degradation resulting from heating and chemical exposure during the CVD growth.

A monolithic integrated micro direct methanol fuel cell based on sulfo functionalized porous silicon

NASA Astrophysics Data System (ADS)

Wang, M.; Lu, Y. X.; Liu, L. T.; Wang, X. H.

2016-11-01

In this paper, we demonstrate a monolithic integrated micro direct methanol fuel cell (μDMFC) for the first time. The monolithic integrated μDMFC combines proton exchange membrane (PEM) and Pt nanocatalysts, in which PEM is achieved by the functionalized porous silicon membrane and 3D Pt nanoflowers being synthesized in situ on it as catalysts. Sulfo groups functionalized porous silicon membrane serves as a PEM and a catalyst support simultaneously. The μDMFC prototype achieves an open circuit voltage of 0.3 V, a maximum power density of 5.5 mW/cm2. The monolithic integrated μDMFC offers several desirable features such as compatibility with micro fabrication techniques, an undeformable solid PEM and the convenience of assembly.

Convenience, food and family lives. A socio-typological study of household food expenditures in 21st-century Belgium.

PubMed

Daniels, Sarah; Glorieux, Ignace

2015-11-01

This article aims to uncover the extent to which convenience foods have become embedded in today's diets. The paper focuses on households' food expenditures, collected by Statistics Belgium in 2005. The results show that households' reliance on (semi-) convenience food items and away-from-home consumption clearly differs over the life-course and amongst different social groups. Findings show that single-living households (single men in particular) look for more convenience in their food preparation patterns compared to couples and households with children. The consumption of semi-convenient meal components seems to be more closely related to the conventional definition of home-cooking, with older-generation, lower-educated, non-working and 'traditional' nuclear households being more likely to spend a larger share of their food budget on non-convenient and 'shortcut' ingredients. Copyright © 2015 Elsevier Ltd. All rights reserved.

Treatment of scalp psoriasis with clobetasol-17 propionate 0.05% shampoo: a study on daily clinical practice.

PubMed

Bovenschen, H J; Van de Kerkhof, P C M

2010-04-01

Safety and clinical effectiveness of clobetasol-17 propionate 0.05% shampoo have been shown in patients with scalp psoriasis. First, to evaluate treatment satisfaction, user convenience safety and effectiveness of clobetasol-17 propionate 0.05% shampoo treatment in daily clinical practice. Second, to identify subgroup variables that may predict treatment success or failure. A total of 56 patients with scalp psoriasis were treated with short-contact clobetasol-17 propionate 0.05% shampoo once daily for 4 weeks. Data on treatment satisfaction, user convenience, safety and effectiveness were assessed on a 7-point Likert scale using postal questionnaires. Subgroup analyses were performed to identify variables that may predict treatment outcome. A total of 41 patients returned both questionnaires (73%). Positive treatment satisfaction and user convenience were reported by 66% and 79% of patients respectively. Patient-rated indicators for disease severity improved by 39-46% (P < 0.05%). No major side-effects were reported. Subgroup analyses did not reveal any statistically significant patient variable that may predict treatment outcome. However, a tendency towards improved treatment satisfaction was observed in patients who had received fewer topical antipsoriatic treatments previously (P > 0.05). Short-contact treatment with clobetasol-17 propionate 0.05% shampoo has high user convenience and patient satisfaction rates. Moreover, the treatment is well-tolerated and efficacious from patients' perspective. Subgroup analyses did not reveal factors predicting treatment outcome, although treatment success tended to be more evident in patients who had received fewer treatments previously.

Longitudinal Trends in Tobacco Availability, Tobacco Advertising, and Ownership Changes of Food Stores, Albany, New York, 2003-2015.

PubMed

Hosler, Akiko S; Done, Douglas H; Michaels, Isaac H; Guarasi, Diana C; Kammer, Jamie R

2016-05-12

Frequency of visiting convenience and corner grocery stores that sell tobacco is positively associated with the odds of ever smoking and the risk of smoking initiation among youth. We assessed 12-year trends of tobacco availability, tobacco advertising, and ownership changes in various food stores in Albany, New York. Eligible stores were identified by multiple government lists and community canvassing in 2003 (n = 107), 2009 (n = 117), 2012 (n = 135), and 2015 (n = 137). Tobacco availability (all years) and advertising (2009, 2012, and 2015) were directly measured; electronic cigarettes (e-cigarettes) were included in 2015. Percentage of stores selling tobacco peaked at 83.8% in 2009 and declined to 74.5% in 2015 (P for trend = .11). E-cigarettes were sold by 63.7% of tobacco retailers. The largest decline in tobacco availability came from convenience stores that went out of business (n = 11), followed by pharmacies that dropped tobacco sales (n = 4). The gain of tobacco availability mostly came from new convenience stores (n = 24) and new dollar stores (n = 8). Significant declining trends (P < .01) were found in tobacco availability and any tobacco advertising in pharmacies and in low (<3 feet) tobacco advertising in convenience stores and stores overall. Only one-third of stores that sold tobacco in 2003 continued to sell tobacco with the same owner in 2015. The observed subtle declines in tobacco availability and advertising were explained in part by local tobacco control efforts, the pharmacy industry's self-regulation of tobacco sales, and an increase in the state's tobacco retailer registration fee. Nonetheless, overall tobacco availability remained high (>16 retailers per 10,000 population) in this community. The high store ownership turnover rate suggests that a moratorium of new tobacco retailer registrations would be an integral part of a multi-prong policy strategy to reduce tobacco availability and advertising.

Longitudinal Trends in Tobacco Availability, Tobacco Advertising, and Ownership Changes of Food Stores, Albany, New York, 2003–2015

PubMed Central

Done, Douglas H.; Michaels, Isaac H.; Guarasi, Diana C.; Kammer, Jamie R.

2016-01-01

Introduction Frequency of visiting convenience and corner grocery stores that sell tobacco is positively associated with the odds of ever smoking and the risk of smoking initiation among youth. We assessed 12-year trends of tobacco availability, tobacco advertising, and ownership changes in various food stores in Albany, New York. Methods Eligible stores were identified by multiple government lists and community canvassing in 2003 (n = 107), 2009 (n = 117), 2012 (n = 135), and 2015 (n = 137). Tobacco availability (all years) and advertising (2009, 2012, and 2015) were directly measured; electronic cigarettes (e-cigarettes) were included in 2015. Results Percentage of stores selling tobacco peaked at 83.8% in 2009 and declined to 74.5% in 2015 (P for trend = .11). E-cigarettes were sold by 63.7% of tobacco retailers. The largest decline in tobacco availability came from convenience stores that went out of business (n = 11), followed by pharmacies that dropped tobacco sales (n = 4). The gain of tobacco availability mostly came from new convenience stores (n = 24) and new dollar stores (n = 8). Significant declining trends (P < .01) were found in tobacco availability and any tobacco advertising in pharmacies and in low (<3 feet) tobacco advertising in convenience stores and stores overall. Only one-third of stores that sold tobacco in 2003 continued to sell tobacco with the same owner in 2015. Conclusion The observed subtle declines in tobacco availability and advertising were explained in part by local tobacco control efforts, the pharmacy industry’s self-regulation of tobacco sales, and an increase in the state’s tobacco retailer registration fee. Nonetheless, overall tobacco availability remained high (>16 retailers per 10,000 population) in this community. The high store ownership turnover rate suggests that a moratorium of new tobacco retailer registrations would be an integral part of a multi-prong policy strategy to reduce tobacco availability and advertising. PMID:27172257

Inhibition of type 1 fimbriae-mediated Escherichia coli adhesion and biofilm formation by trimeric cluster thiomannosides conjugated to diamond nanoparticles

NASA Astrophysics Data System (ADS)

Khanal, Manakamana; Larsonneur, Fanny; Raks, Victoriia; Barras, Alexandre; Baumann, Jean-Sébastien; Martin, Fernando Ariel; Boukherroub, Rabah; Ghigo, Jean-Marc; Ortiz Mellet, Carmen; Zaitsev, Vladimir; Garcia Fernandez, Jose M.; Beloin, Christophe; Siriwardena, Aloysius; Szunerits, Sabine

2015-01-01

Recent advances in nanotechnology have seen the development of a number of microbiocidal and/or anti-adhesive nanoparticles displaying activity against biofilms. In this work, trimeric thiomannoside clusters conjugated to nanodiamond particles (ND) were targeted for investigation. NDs have attracted attention as a biocompatible nanomaterial and we were curious to see whether the high mannose glycotope density obtained upon grouping monosaccharide units in triads might lead to the corresponding ND-conjugates behaving as effective inhibitors of E. coli type 1 fimbriae-mediated adhesion as well as of biofilm formation. The required trimeric thiosugar clusters were obtained through a convenient thiol-ene ``click'' strategy and were subsequently conjugated to alkynyl-functionalized NDs using a Cu(i)-catalysed ``click'' reaction. We demonstrated that the tri-thiomannoside cluster-conjugated NDs (ND-Man3) show potent inhibition of type 1 fimbriae-mediated E. coli adhesion to yeast and T24 bladder cells as well as of biofilm formation. The biofilm disrupting effects demonstrated here have only rarely been reported in the past for analogues featuring such simple glycosidic motifs. Moreover, the finding that the tri-thiomannoside cluster (Man3N3) is itself a relatively efficient inhibitor, even when not conjugated to any ND edifice, suggests that alternative mono- or multivalent sugar-derived analogues might also be usefully explored for E. coli-mediated biofilm disrupting properties.Recent advances in nanotechnology have seen the development of a number of microbiocidal and/or anti-adhesive nanoparticles displaying activity against biofilms. In this work, trimeric thiomannoside clusters conjugated to nanodiamond particles (ND) were targeted for investigation. NDs have attracted attention as a biocompatible nanomaterial and we were curious to see whether the high mannose glycotope density obtained upon grouping monosaccharide units in triads might lead to the corresponding ND-conjugates behaving as effective inhibitors of E. coli type 1 fimbriae-mediated adhesion as well as of biofilm formation. The required trimeric thiosugar clusters were obtained through a convenient thiol-ene ``click'' strategy and were subsequently conjugated to alkynyl-functionalized NDs using a Cu(i)-catalysed ``click'' reaction. We demonstrated that the tri-thiomannoside cluster-conjugated NDs (ND-Man3) show potent inhibition of type 1 fimbriae-mediated E. coli adhesion to yeast and T24 bladder cells as well as of biofilm formation. The biofilm disrupting effects demonstrated here have only rarely been reported in the past for analogues featuring such simple glycosidic motifs. Moreover, the finding that the tri-thiomannoside cluster (Man3N3) is itself a relatively efficient inhibitor, even when not conjugated to any ND edifice, suggests that alternative mono- or multivalent sugar-derived analogues might also be usefully explored for E. coli-mediated biofilm disrupting properties. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr05906a

Rhodium-catalyzed Chemo- and Regioselective Cross-dimerization of Two Terminal Alkynes

PubMed Central

Xu, Hua-Dong; Zhang, Ren-Wei; Li, Xiaoxun; Huang, Suyu; Tang, Weiping; Hu, Wen-Hao

2013-01-01

Cross-dimerization of terminal arylacetylenes and terminal propargylic alcohols/amides has been achieved in the effect of a rhodium catalyst. This method features high chemo- and regioselectivities rendering convenient and atom economical access to functionalized enynes. PMID:23356993

Marketing Higher Education.

ERIC Educational Resources Information Center

Knight, Brent; Johnson, Dennis

1981-01-01

In a successful college marketing program, students and high-quality instruction are top priorities. Marketing research should investigate student needs and frustrations, the products offered, value received for time and money invested, physical convenience and appeal, and promotional strategies. Program research and development suggestions are…

A novel electrochemiluminescence strategy for ultrasensitive DNA assay using luminol functionalized gold nanoparticles multi-labeling and amplification of gold nanoparticles and biotin-streptavidin system.

PubMed

Chai, Ying; Tian, Dayong; Wang, Wei; Cui, Hua

2010-10-28

Luminol functionalized gold nanoparticles were used as labels for electrochemiluminescence signal amplification and an ultrasensitive, highly selective, convenient, low cost DNA detection strategy was developed.

Food Trends.

ERIC Educational Resources Information Center

Schwenk, Nancy E.

1991-01-01

An overall perspective on trends in food consumption is presented. Nutrition awareness is at an all-time high; consumption is influenced by changes in disposable income, availability of convenience foods, smaller household size, and an increasing proportion of ethnic minorities in the population. (18 references) (LB)

Developing a framework of service convenience in health care: An exploratory study for a primary care provider.

PubMed

Tuzovic, Sven; Kuppelwieser, Volker

2016-01-01

From retail health clinics and online appointment scheduling to (mobile) kiosks that enable patient check-in and automate the collection of copays and open balances, convenience has become an important topic in the health care sector over the last few years. While service convenience has also gained much interest in academia, one common limitation is that authors have adopted a "goods-centered" perspective focusing primarily on retail settings. Results of this exploratory study reveal that health care service convenience encompasses seven different dimensions: decision, access, scheduling, registration and check-in, transaction, care delivery, and postconsultation convenience. Implications and future research suggestions are discussed.

Disparities of food availability and affordability within convenience stores in Bexar County, Texas.

PubMed

Smith, Matthew Lee; Sunil, T S; Salazar, Camerino I; Rafique, Sadaf; Ory, Marcia G

2013-01-01

The American Diabetes Association (ADA) recommends healthful food choices; however, some geographic areas are limited in the types of foods they offer. Little is known about the role of convenience stores as viable channels to provide healthier foods in our "grab and go" society. The purposes of this study were to (1) identify foods offered within convenience stores located in two Bexar County, Texas, ZIP Codes and (2) compare the availability and cost of ADA-recommended foods including beverages, produce, grains, and oils/fats. Data were analyzed from 28 convenience store audits performed in two sociodemographically diverse ZIP Codes in Bexar County, Texas. Chi-squared tests were used to compare food availability, and t-tests were used to compare food cost in convenience stores between ZIP Codes. A significantly larger proportion of convenience stores in more affluent areas offered bananas (χ (2) = 4.17, P = 0.003), whole grain bread (χ (2) = 8.33, P = 0.004), and baked potato chips (χ (2) = 13.68, P < 0.001). On average, the price of diet cola (t = -2.12, P = 0.044) and certain produce items (e.g., bananas, oranges, tomatoes, broccoli, and cucumber) was significantly higher within convenience stores in more affluent areas. Convenience stores can play an important role to positively shape a community's food environment by stocking healthier foods at affordable prices.

Disparities of Food Availability and Affordability within Convenience Stores in Bexar County, Texas

PubMed Central

Smith, Matthew Lee; Sunil, T. S.; Salazar, Camerino I.; Rafique, Sadaf; Ory, Marcia G.

2013-01-01

The American Diabetes Association (ADA) recommends healthful food choices; however, some geographic areas are limited in the types of foods they offer. Little is known about the role of convenience stores as viable channels to provide healthier foods in our “grab and go” society. The purposes of this study were to (1) identify foods offered within convenience stores located in two Bexar County, Texas, ZIP Codes and (2) compare the availability and cost of ADA-recommended foods including beverages, produce, grains, and oils/fats. Data were analyzed from 28 convenience store audits performed in two sociodemographically diverse ZIP Codes in Bexar County, Texas. Chi-squared tests were used to compare food availability, and t-tests were used to compare food cost in convenience stores between ZIP Codes. A significantly larger proportion of convenience stores in more affluent areas offered bananas (χ 2 = 4.17, P = 0.003), whole grain bread (χ 2 = 8.33, P = 0.004), and baked potato chips (χ 2 = 13.68, P < 0.001). On average, the price of diet cola (t = −2.12, P = 0.044) and certain produce items (e.g., bananas, oranges, tomatoes, broccoli, and cucumber) was significantly higher within convenience stores in more affluent areas. Convenience stores can play an important role to positively shape a community's food environment by stocking healthier foods at affordable prices. PMID:23935645

Nickel-Salen supported paramagnetic nanoparticles for 6-His-target recombinant protein affinity purification.

PubMed

Rashid, Zahra; Ghahremanzadeh, Ramin; Nejadmoghaddam, Mohammad-Reza; Nazari, Mahboobeh; Shokri, Mohammad-Reza; Naeimi, Hossein; Zarnani, Amir-Hassan

2017-03-24

In this research, a simple, efficient, inexpensive, rapid and high yield method for the purification of 6×histidine-tagged recombinant protein was developed. For this purpose, manganese ferrite magnetic nanoparticles (MNPs) were synthesized through a co-precipitation method and then they were conveniently surface-modified with tetraethyl orthosilicate (TEOS) in order to prevent oxidation and form high density of hydroxyl groups. Next, the salen ligand was prepared from condensation reaction of salicylaldehyde and 3-aminopropyl (trimethoxy) silane (APTMS) in 1:1 molar ratio; followed by complexation with Ni(OAc) 2 .4H 2 O. Finally, the prepared Ni(II)-salen complex conjugated to silica coated MNPs and MnFe 2 O 4 @SiO 2 @Ni-Salen complex nanoparticles were obtained. The functionalized nanoparticles were spherical with an average diameter around 70nm. The obtained MNPs had a saturation magnetization about 54 emu/g and had super paramagnetic character. These MNPs were used efficiently to enrich recombinant histidine-tagged (His-tagged) protein-A from bacterial cell lysate. In about 45min, highly pure His-tagged recombinant protein was obtained, as judged by SDS-PAGE analysis and silver staining. The amount of target protein in flow through and washing fractions was minimal denoting the high efficiency of purification process. The average capacity of the matrix was found to be high and about 180±15mgg -1 (protein/MnFe 2 O 4 @SiO 2 @Ni-Salen complex). Collectively, purification process with MnFe 2 O 4 @SiO 2 @Ni-Salen complex nanoparticles is rapid, efficient, selective and whole purification can be carried out in only a single tube without the need for expensive systems. Copyright © 2017 Elsevier B.V. All rights reserved.

28 CFR 66.44 - Termination for convenience.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Termination for convenience. 66.44 Section 66.44 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) UNIFORM ADMINISTRATIVE... Reports, Records, Retention, and Enforcement § 66.44 Termination for convenience. Except as provided in...

ORBIT: A Code for Collective Beam Dynamics in High-Intensity Rings

NASA Astrophysics Data System (ADS)

Holmes, J. A.; Danilov, V.; Galambos, J.; Shishlo, A.; Cousineau, S.; Chou, W.; Michelotti, L.; Ostiguy, J.-F.; Wei, J.

2002-12-01

We are developing a computer code, ORBIT, specifically for beam dynamics calculations in high-intensity rings. Our approach allows detailed simulation of realistic accelerator problems. ORBIT is a particle-in-cell tracking code that transports bunches of interacting particles through a series of nodes representing elements, effects, or diagnostics that occur in the accelerator lattice. At present, ORBIT contains detailed models for strip-foil injection, including painting and foil scattering; rf focusing and acceleration; transport through various magnetic elements; longitudinal and transverse impedances; longitudinal, transverse, and three-dimensional space charge forces; collimation and limiting apertures; and the calculation of many useful diagnostic quantities. ORBIT is an object-oriented code, written in C++ and utilizing a scripting interface for the convenience of the user. Ongoing improvements include the addition of a library of accelerator maps, BEAMLINE/MXYZPTLK; the introduction of a treatment of magnet errors and fringe fields; the conversion of the scripting interface to the standard scripting language, Python; and the parallelization of the computations using MPI. The ORBIT code is an open source, powerful, and convenient tool for studying beam dynamics in high-intensity rings.

The proportion of unhealthy foodstuffs children are exposed to at the checkout of convenience supermarkets.

PubMed

Horsley, Jason A; Absalom, Katie Ar; Akiens, Evie M; Dunk, Robert J; Ferguson, Alice M

2014-11-01

To investigate the proportion of foods that are unhealthy to which children are exposed at the checkout of convenience supermarkets. We performed a cross-sectional survey of foodstuffs displayed at the checkout. Products displayed at or below children's eye-level were designated as healthy, unhealthy or unclassifiable using the Food Standards Agency's scoring criteria. Thirteen convenience supermarkets from the three leading UK supermarket chains were selected on the basis of proximity to the town hall in Sheffield, England. Convenience supermarkets were defined as branches of supermarket chains that were identified as being other than superstores on their company's store locator website. In almost all of the convenience supermarkets surveyed, the main healthy product on display was sugar-free chewing gum. On average, when chewing gum was not included as a foodstuff, 89% of the products on display at the checkouts of convenience supermarkets were unhealthy using the Food Standards Agency's criteria. One store was a notable outlier, providing only fruit and nuts at its checkout. The overwhelming majority of products to which children are exposed at the convenience supermarket checkout are unhealthy. This is despite all the supermarket chains surveyed having signed up to the UK Government's 'responsibility deal'.

Creep behavior of soil nail walls in high plasticity index (PI) soils : project summary.

DOT National Transportation Integrated Search

2015-08-31

Soil nailing is a convenient and economic : stabilization method for the reinforcement of existing : excavations by installing threaded steel bars into cuts : or slopes as wall construction progresses from top : down (Figure 1). An aspect of particul...

Evaluation of a DVD-Based Self-Help Program in Highly Socially Anxious Individuals--Pilot Study

ERIC Educational Resources Information Center

Mall, Anna K.; Mehl, Annette; Kiko, Sonja; Kleindienst, Nikolaus; Salize, Hans-Joachim; Hermann, Christiane; Hoffmann, Torsten; Bohus, Martin; Steil, Regina

2011-01-01

High social anxiety is a risk factor for the incidence of social anxiety disorder (SAD). Early diagnosis and intervention may prevent more severe psychiatric courses. Self-help programs may be a convenient, accessible, and effective intervention. This study examined the efficacy of a newly developed self-help program for SAD in individuals with…

Do Students Using Electronic Books Display Different Reading Comprehension and Motivation Levels than Students Using Traditional Print Books?

ERIC Educational Resources Information Center

Wells, Casey L.

2012-01-01

The effect of electronic books on the reading comprehension of middle and high school students was examined using an experimental posttest-only control-group design. A convenience sample of 140 randomly assigned middle and high school English students at an independent school in eastern North Carolina participated. Half of the students used…

γ-Alumina Nanoparticle Catalyzed Efficient Synthesis of Highly Substituted Imidazoles.

PubMed

Reddy, Bandapalli Palakshi; Vijayakumar, Vijayaparthasarathi; Arasu, Mariadhas Valan; Al-Dhabi, Naif Abdullah

2015-10-21

γ-Alumina nano particle catalyzed multi component reaction of benzil, arylaldehyde and aryl amines afforded the highly substituted 1,2,4,5-tetraaryl imidazoles with good to excellent yield in less reaction time under the sonication as well as the conventional methods. Convenient operational simplicity, mild conditions and the reusability of catalyst were the other advantages of this developed protocol.

Evolution and Protein Packaging of Small Molecule RNA Aptamers

PubMed Central

Lau, Jolene L.; Baksh, Michael M.; Fiedler, Jason D.; Brown, Steven D.; Kussrow, Amanda; Bornhop, Darryl J.; Ordoukhanian, Phillip

2011-01-01

A high-affinity RNA aptamer (Kd = 50 nM) was efficiently identified by SELEX against a heteroaryl dihydropyrimidine structure, chosen as a representative drug-like molecule with no cross reactivity with mammalian or bacterial cells. This aptamer, its weaker-binding variants, and a known aptamer against theophylline were each embedded in a longer RNA sequence that was encapsidated inside a virus-like particle by a convenient expression technique. These nucleoprotein particles were shown by backscattering interferometry to bind to the small-molecule ligands with affinities similar to those of the free (non-encapsidated) aptamers. The system therefore comprises a general approach to the production and sequestration of functional RNA molecules, characterized by a convenient label-free analytical technique. PMID:21899290

Making Spatial Statistics Service Accessible On Cloud Platform

NASA Astrophysics Data System (ADS)

Mu, X.; Wu, J.; Li, T.; Zhong, Y.; Gao, X.

2014-04-01

Web service can bring together applications running on diverse platforms, users can access and share various data, information and models more effectively and conveniently from certain web service platform. Cloud computing emerges as a paradigm of Internet computing in which dynamical, scalable and often virtualized resources are provided as services. With the rampant growth of massive data and restriction of net, traditional web services platforms have some prominent problems existing in development such as calculation efficiency, maintenance cost and data security. In this paper, we offer a spatial statistics service based on Microsoft cloud. An experiment was carried out to evaluate the availability and efficiency of this service. The results show that this spatial statistics service is accessible for the public conveniently with high processing efficiency.

Quality of Artemisinin-Based Combination Formulations for Malaria Treatment: Prevalence and Risk Factors for Poor Quality Medicines in Public Facilities and Private Sector Drug Outlets in Enugu, Nigeria

PubMed Central

Kaur, Harparkash; Allan, Elizabeth Louise; Mamadu, Ibrahim; Hall, Zoe; Ibe, Ogochukwu; El Sherbiny, Mohamed; van Wyk, Albert; Yeung, Shunmay; Swamidoss, Isabel; Green, Michael D.; Dwivedi, Prabha; Culzoni, Maria Julia; Clarke, Siân; Schellenberg, David; Fernández, Facundo M.; Onwujekwe, Obinna

2015-01-01

Background Artemisinin-based combination therapies are recommended by the World Health Organisation (WHO) as first-line treatment for Plasmodium falciparum malaria, yet medication must be of good quality for efficacious treatment. A recent meta-analysis reported 35% (796/2,296) of antimalarial drug samples from 21 Sub-Saharan African countries, purchased from outlets predominantly using convenience sampling, failed chemical content analysis. We used three sampling strategies to purchase artemisinin-containing antimalarials (ACAs) in Enugu metropolis, Nigeria, and compared the resulting quality estimates. Methods ACAs were purchased using three sampling approaches - convenience, mystery clients and overt, within a defined area and sampling frame in Enugu metropolis. The active pharmaceutical ingredients were assessed using high-performance liquid chromatography and confirmed by mass spectrometry at three independent laboratories. Results were expressed as percentage of APIs stated on the packaging and used to categorise each sample as acceptable quality, substandard, degraded, or falsified. Results Content analysis of 3024 samples purchased from 421 outlets using convenience (n=200), mystery (n=1,919) and overt (n=905) approaches, showed overall 90.8% ACAs to be of acceptable quality, 6.8% substandard, 1.3% degraded and 1.2% falsified. Convenience sampling yielded a significantly higher prevalence of poor quality ACAs, but was not evident by the mystery and overt sampling strategies both of which yielded results that were comparable between each other. Artesunate (n=135; 4 falsified) and dihydroartemisinin (n=14) monotherapy tablets, not recommended by WHO, were also identified. Conclusion Randomised sampling identified fewer falsified ACAs than previously reported by convenience approaches. Our findings emphasise the need for specific consideration to be given to sampling frame and sampling approach if representative information on drug quality is to be obtained. PMID:26018221

Community pharmacy customer segmentation based on factors influencing their selection of pharmacy and over-the-counter medicines.

PubMed

Kevrekidis, Dimitrios Phaedon; Minarikova, Daniela; Markos, Angelos; Malovecka, Ivona; Minarik, Peter

2018-01-01

Within the competitive pharmacy market environment, community pharmacies are required to develop efficient marketing strategies based on contemporary information about consumer behavior in order to attract clients and develop customer loyalty. This study aimed to investigate the consumers' preferences concerning the selection of pharmacy and over-the-counter (OTC) medicines, and to identify customer segments in relation to these preferences. A cross-sectional study was conducted between February and March 2016 on a convenient quota sample of 300 participants recruited in the metropolitan area of Thessaloniki, Greece. The main instrument used for data collection was a structured questionnaire with close-ended, multiple choice questions. To identify customer segments, Two-Step cluster analysis was conducted. Three distinct pharmacy customer clusters emerged. Customers of the largest cluster (49%; 'convenience customers') were mostly younger consumers. They gave moderate to positive ratings to factors affecting the selection of pharmacy and OTCs; convenience, and previous experience and the pharmacist's opinion, received the highest ratings. Customers of the second cluster (35%; 'loyal customers') were mainly retired; most of them reported visiting a single pharmacy. They gave high ratings to all factors that influence pharmacy selection, especially the pharmacy's staff, and factors influencing the purchase of OTCs, particularly previous experience and the pharmacist's opinion. Customers of the smallest cluster (16%; 'convenience and price-sensitive customers') were mainly retired or unemployed with low to moderate education, and low personal income. They gave the lowest ratings to most of the examined factors; convenience among factors influencing pharmacy selection, whereas previous experience, the pharmacist's opinion and product price among those affecting the purchase of OTCs, received the highest ratings. The community pharmacy market comprised of distinct customer segments that varied in the consumer preferences concerning the selection of pharmacy and OTCs, the evaluation of pharmaceutical services and products, and demographic characteristics.

14 CFR 152.507 - Termination for convenience.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Termination for convenience. 152.507 Section 152.507 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... convenience. (a) When the continuation of the project would not produce beneficial results commensurate with...

45 CFR 2541.440 - Termination for convenience.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Termination for convenience. 2541.440 Section 2541.440 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION FOR NATIONAL AND... LOCAL GOVERNMENTS Reports, Records, Retention and Enforcement § 2541.440 Termination for convenience...

Pricing a Convenience Food.

ERIC Educational Resources Information Center

Gabor, Andre

1980-01-01

Discusses a study undertaken by the Nottingham University Consumer Study Group to determine market operation for popular convenience foods in England. Information is presented on distribution of purchases, brand loyalties of respondents to a questionnaire regarding convenience foods, and market fluctuation due to inflation. (Author/DB)

The NT digital micro tape recorder

NASA Technical Reports Server (NTRS)

Sasaki, Toshikazu; Alstad, John; Younker, Mike

1993-01-01

The description of an audio recorder may at first glance seem out of place in a conference which has been dedicated to the discussion of the technology and requirements of mass data storage. However, there are several advanced features of the NT system which will be of interest to the mass storage technologist. Moreover, there are a sufficient number of data storage formats in current use which have evolved from their audio counterparts to recommend a close attention to major innovative introductions of audio storage formats. While the existing analog micro-cassette recorder has been (and will continue to be) adequate for various uses, there are significant benefits to be gained through the application of digital technology. The elimination of background tape hiss and the availability of two relatively wide band channels (for stereo recording), for example, would greatly enhance listenability and speech intelligibility. And with the use of advanced high-density recording and LSI circuit technologies, a digital micro recorder can realize unprecedented compactness with excellent energy efficiency. This is what was accomplished with the NT-1 Digital Micro Recorder. Its remarkably compact size contributes to its portability. The high-density NT format enables up to two hours of low-noise digital stereo recording on a cassette the size of a postage stamp. Its highly energy-efficient mechanical and electrical design results in low power consumption; the unit can be operated up to 7 hours (for continuous recording) on a single AA alkaline battery. Advanced user conveniences include a multifunction LCD readout. The unit's compactness and energy-efficiency, in particular, are attributes that cannot be matched by existing analog and digital audio formats. The size, performance, and features of the NT format are of benefit primarily to those who desire improved portability and audio quality in a personal memo product. The NT Recorder is the result of over ten years of intensive, multi-disciplinary research and development. What follows is a discussion of the technologies that have made the NT possible: (1) NT format mechanics, (2) NT media, (3) NT circuitry and board.

Convenience stores and the marketing of foods and beverages through product assortment.

PubMed

Sharkey, Joseph R; Dean, Wesley R; Nalty, Courtney

2012-09-01

Product assortment (presence and variety) is a key in-store marketing strategy to influence consumer choice. Quantifying the product assortment of healthier and less-healthy foods and beverages in convenience stores can inform changes in the food environment. To document product assortment (i.e., presence and variety of specific foods and beverages) in convenience stores. Observational survey data were collected onsite in 2011 by trained promotora-researchers in 192 convenience stores. Frequencies of presence and distributions of variety were calculated in 2012. Paired differences were examined using the Wilcoxon matched-pairs signed-rank test. Convenience stores displayed a large product assortment of sugar-sweetened beverages (median 86.5 unique varieties); candy (76 varieties); salty snacks (77 varieties); fried chips (44 varieties); cookies and pastries (19 varieties); and frozen sweets (21 varieties). This compared with 17 varieties of non-sugar sweetened beverages and three varieties of baked chips. The Wilcoxon signed-rank test confirmed a (p<0.001) greater variety of sugar-sweetened than non-sugar-sweetened beverages, and of fried chips compared with baked chips. Basic food items provided by convenience stores included milk (84% of stores); fresh fruit (33%); fresh vegetables (35%); canned vegetables (78%); white bread (71%); and deli-style packaged meat (57%). Healthier versions of milk, canned fruit, canned tuna, bread, and deli-style packaged meat were displayed in 17%-71% of convenience stores. Convenience stores in this area provide a greater assortment of less-healthy compared with healthier foods and beverages. There are opportunities to influence consumer food choice through programs that alter the balance between healthier and less-healthy foods and beverages in existing convenience stores that serve rural and underserved neighborhoods and communities. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.