7 CFR 3430.309 - Priority areas.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture and Food Research Initiative § 3430.309 Priority areas. NIFA will award competitive grants in the...) Conventional breeding, including cultivar and breed development, selection theory, applied quantitative... development, selection theory, applied quantitative genetics, breeding for improved food quality, breeding for...

7 CFR 3430.309 - Priority areas.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture and Food Research Initiative § 3430.309 Priority areas. NIFA will award competitive grants in the...) Conventional breeding, including cultivar and breed development, selection theory, applied quantitative... development, selection theory, applied quantitative genetics, breeding for improved food quality, breeding for...

7 CFR 3430.309 - Priority areas.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture and Food Research Initiative § 3430.309 Priority areas. NIFA will award competitive grants in the...) Conventional breeding, including cultivar and breed development, selection theory, applied quantitative... development, selection theory, applied quantitative genetics, breeding for improved food quality, breeding for...

Expected net present value of pure and mixed sexed semen artificial insemination strategies in dairy heifers.

PubMed

Olynk, N J; Wolf, C A

2007-05-01

Sexed semen has been a long-anticipated tool for dairy farmers to obtain more heifer calves, but challenges exist for integrating sexed semen into commercial dairy farm reproduction programs. The decreased conception rates (CR) experienced with sexed semen make virgin heifers better suited for insemination with sexed semen than lactating dairy cows. This research sought to identify when various sexed semen breeding strategies provided higher expected net present value (NPV) than conventional artificial insemination (AI) breeding schemes, indicating which breeding scheme is advisable under various scenarios. Budgets were developed to calculate the expected NPV of various AI breeding strategies incorporating conventional (non-sexed) and sexed semen. In the base budgets, heifer and bull calf values were held constant at $500 and $110, respectively. The percentage of heifers expected to be born after breeding with conventional and sexed semen used was 49.2 and 90%, respectively. Breeding costs per AI were held constant at $15.00 per AI for conventional semen and $45.00 per AI for sexed semen of approximately the same genetic value. Conventional semen CR of 58 and 65% were used, and an AI submission rate was set at 100%. Breeding strategies with sexed semen were assessed for breakeven heifer calf values and sexed semen costs to obtain a NPV equal to that achieved with conventional semen. Breakeven heifer calf values for pure sexed semen strategies with a constant 58 and 65% base CR in which sexed semen achieved 53% of the base CR are $732.11 and $664.26, respectively. Breakeven sexed semen costs per AI of $17.16 and $22.39, compared with $45.00 per AI, were obtained to obtain a NPV equal to that obtained with pure conventional semen for base CR of 58 and 65%, respectively. The strategy employing purely sexed semen, with base CR of both 58 and 65%, yielded a lower NPV than purely conventional semen in all but the best-case scenario in which sexed semen provides 90% of the CR of conventional semen. Other potential advantages of sexed semen that were not quantified in the scenarios include biosecurity-related concerns, decreased dystocia due to increased numbers of heifer calves, and implications for internal herd growth.

Biotechnological advancement in genetic improvement of broccoli (Brassica oleracea L. var. italica), an important vegetable crop.

PubMed

Kumar, Pankaj; Srivastava, Dinesh Kumar

2016-07-01

With the advent of molecular biotechnology, plant genetic engineering techniques have opened an avenue for the genetic improvement of important vegetable crops. Vegetable crop productivity and quality are seriously affected by various biotic and abiotic stresses which destabilize rural economies in many countries. Moreover, absence of proper post-harvest storage and processing facilities leads to qualitative and quantitative losses. In the past four decades, conventional breeding has significantly contributed to the improvement of vegetable yields, quality, post-harvest life, and resistance to biotic and abiotic stresses. However, there are many constraints in conventional breeding, which can only be overcome by advancements made in modern biology. Broccoli (Brassica oleracea L. var. italica) is an important vegetable crop, of the family Brassicaceae; however, various biotic and abiotic stresses cause enormous crop yield losses during the commercial cultivation of broccoli. Thus, genetic engineering can be used as a tool to add specific characteristics to existing cultivars. However, a pre-requisite for transferring genes into plants is the availability of efficient regeneration and transformation techniques. Recent advances in plant genetic engineering provide an opportunity to improve broccoli in many aspects. The goal of this review is to summarize genetic transformation studies on broccoli to draw the attention of researchers and scientists for its further genetic advancement.

Accelerating the domestication of forest trees in a changing world.

PubMed

Harfouche, Antoine; Meilan, Richard; Kirst, Matias; Morgante, Michele; Boerjan, Wout; Sabatti, Maurizio; Scarascia Mugnozza, Giuseppe

2012-02-01

In light of impending water and arable land shortages, population growth and climate change, it is more important than ever to examine how forest tree domestication can be accelerated to sustainably meet future demands for wood, biomass, paper, fuel and biomaterials. Because of long breeding cycles, tree domestication cannot be rapidly achieved through traditional genetic improvement methods alone. Integrating modern genetic and genomic techniques with conventional breeding will expedite tree domestication. Breeders will only embrace these technologies if they are cost-effective and readily accessible, and forest landowners will only adopt end-products that meet with regulatory approval and public acceptance. All parties involved must work together to achieve these objectives for the benefit of society. Copyright © 2011 Elsevier Ltd. All rights reserved.

Precise plant breeding using new genome editing techniques: opportunities, safety and regulation in the EU.

PubMed

Hartung, Frank; Schiemann, Joachim

2014-06-01

Several new plant breeding techniques (NPBTs) have been developed during the last decade, and make it possible to precisely perform genome modifications in plants. The major problem, other than technical aspects, is the vagueness of regulation concerning these new techniques. Since the definition of eight NPBTs by a European expert group in 2007, there has been an ongoing debate on whether the resulting plants and their products are covered by GMO legislation. Obviously, cover by GMO legislation would severely hamper the use of NPBT, because genetically modified plants must pass a costly and time-consuming GMO approval procedure in the EU. In this review, we compare some of the NPBTs defined by the EU expert group with classical breeding techniques and conventional transgenic plants. The list of NPBTs may be shortened (or extended) during the international discussion process initiated by the Organization for Economic Co-operation and Development. From the scientific point of view, it may be argued that plants developed by NPBTs are often indistinguishable from classically bred plants and are not expected to possess higher risks for health and the environment. In light of the debate on the future regulation of NPBTs and the accumulated evidence on the biosafety of genetically modified plants that have been commercialized and risk-assessed worldwide, it may be suggested that plants modified by crop genetic improvement technologies, including genetic modification, NPBTs or other future techniques, should be evaluated according to the new trait and the resulting end product rather than the technique used to create the new plant variety. © 2013 The Authors The Plant Journal © 2013 John Wiley & Sons Ltd.

Genomic tools and and prospects for new breeding techniques in flower bulb crops

USDA-ARS?s Scientific Manuscript database

For many of the new breeding techniques, sequence information is of the utmost importance. In addition to current breeding techniques, such as marker-assisted selection (MAS) and genetic modification (GM), new breeding techniques such as zinc finger nucleases, oligonucleotide-mediated mutagenesis, R...

The Elusive Search for Reniform Nematode Resistance in Cotton.

PubMed

Khanal, Churamani; McGawley, Edward C; Overstreet, Charles; Stetina, Salliana R

2018-05-01

The reniform nematode (Rotylenchulus reniformis Linford and Oliveira) has emerged as the most important plant-parasitic nematode of cotton in the United States cotton belt. Success in the development of reniform nematode-resistant upland cotton cultivars (Gossypium hirsutum L.) has not been realized despite over three decades of breeding efforts. Research approaches ranging from conventional breeding to triple species hybrids to marker-assisted selection have been employed to introgress reniform nematode resistance from other species of cotton into upland cultivars. Reniform nematode-resistant breeding lines derived from G. longicalyx were developed in 2007. However, these breeding lines displayed stunting symptoms and a hypersensitive response to reniform nematode infection. Subsequent breeding efforts focused on G. barbadense, G. aridum, G. armoreanum, and other species that have a high level of resistance to reniform nematode. Marker-assisted selection has greatly improved screening of reniform nematode-resistant lines. The use of advanced molecular techniques such as CRISPER-Cas9 systems and alternative ways such as delivery of suitable "cry" proteins and specific double-stranded RNA to nematodes will assist in developing resistant cultivars of cotton. In spite of the efforts of cotton breeders and nematologists, successes are limited only to the development of reniform nematode-resistant breeding lines. In this article, we provide an overview of the approaches employed to develop reniform nematode-resistant upland cotton cultivars in the past, progress to date, major obstacles, and some promising future research activity.

Citrus breeding, genetics and genomics in Japan

PubMed Central

Omura, Mitsuo; Shimada, Takehiko

2016-01-01

Citrus is one of the most cultivated fruits in the world, and satsuma mandarin (Citrus unshiu Marc.) is a major cultivated citrus in Japan. Many excellent cultivars derived from satsuma mandarin have been released through the improvement of mandarins using a conventional breeding method. The citrus breeding program is a lengthy process owing to the long juvenility, and it is predicted that marker-assisted selection (MAS) will overcome the obstacle and improve the efficiency of conventional breeding methods. To promote citrus molecular breeding in Japan, a genetic mapping was initiated in 1987, and the experimental tools and resources necessary for citrus functional genomics have been developed in relation to the physiological analysis of satsuma mandarin. In this paper, we review the progress of citrus breeding and genome researches in Japan and report the studies on genetic mapping, expression sequence tag cataloguing, and molecular characterization of breeding characteristics, mainly in terms of the metabolism of bio-functional substances as well as factors relating to, for example, fruit quality, disease resistance, polyembryony, and flowering. PMID:27069387

Assessing the impact of natural service bulls and genotype by environment interactions on genetic gain and inbreeding in organic dairy cattle genomic breeding programs.

PubMed

Yin, T; Wensch-Dorendorf, M; Simianer, H; Swalve, H H; König, S

2014-06-01

The objective of the present study was to compare genetic gain and inbreeding coefficients of dairy cattle in organic breeding program designs by applying stochastic simulations. Evaluated breeding strategies were: (i) selecting bulls from conventional breeding programs, and taking into account genotype by environment (G×E) interactions, (ii) selecting genotyped bulls within the organic environment for artificial insemination (AI) programs and (iii) selecting genotyped natural service bulls within organic herds. The simulated conventional population comprised 148 800 cows from 2976 herds with an average herd size of 50 cows per herd, and 1200 cows were assigned to 60 organic herds. In a young bull program, selection criteria of young bulls in both production systems (conventional and organic) were either 'conventional' estimated breeding values (EBV) or genomic estimated breeding values (GEBV) for two traits with low (h 2=0.05) and moderate heritability (h 2=0.30). GEBV were calculated for different accuracies (r mg), and G×E interactions were considered by modifying originally simulated true breeding values in the range from r g=0.5 to 1.0. For both traits (h 2=0.05 and 0.30) and r mg⩾0.8, genomic selection of bulls directly in the organic population and using selected bulls via AI revealed higher genetic gain than selecting young bulls in the larger conventional population based on EBV; also without the existence of G×E interactions. Only for pronounced G×E interactions (r g=0.5), and for highly accurate GEBV for natural service bulls (r mg>0.9), results suggests the use of genotyped organic natural service bulls instead of implementing an AI program. Inbreeding coefficients of selected bulls and their offspring were generally lower when basing selection decisions for young bulls on GEBV compared with selection strategies based on pedigree indices.

Analysis of silkworm gut microflora in the Bioregenerative Life Support System

NASA Astrophysics Data System (ADS)

Liang, Xue; Liu, lh64. Hong

2012-07-01

Silkworm (Bombyx mori L) has advantages in the nutritional composition, growth characteristics and other factors, it is regarded as animal protein source for astronauts in the Bioregenerative Life Support System (BLSS).Due to the features of BLSS, silkworm breeding way is different from the conventional one (mulberry leaves throughout five instars): they were fed with mulberry and lettuce leaves during the 1st-3rd instars and 4th -5th instars, respectively. As the lettuce stem can be eaten by astronauts, the leaves not favored by humans can be insect's foodstuff. Therefore, it is necessary to investigate the gut microbial composition, the type of dominant bacteria of silkworm raised with this way and the differences from the conventional breeding method, so as to reduce the mortality rate caused by the foodstuff change and to provide more animal protein for astronauts. In this study, 16srDNA sequencing, phylogenetic analysis and denaturing gradient gel electrophoresis method were used to analyze the silkworm gut microbial flora under two breeding manners. The results show that conventional and BLSS breeding way have six dominant bacteria in common: Clostridium, Enterococcus, Bacteroides, Chryseobacterium, Parabacteroides, Paenibacillus. We also found Escherichia, Janthinobacterium, Sedimentibacter, Streptococcus, Bacillus, Arcobacter, Rothia, Polaribacter and Acinetobacter, Anaerofilum, Rummeliibacillus, Anaeroplasma, Serratia in the ground conventional and BLSS special breeding way, respectively. Changing the foodstuff of silkworm leads to the dynamic alteration of gut microbial. Dominant bacteria of the two breeding ways have diversities from each other. The ground conventional breeding way has more abundant bacteria than the BLSS one. Due to the lettuce leaves have replaced mulberry leaves at the beginning of the silkworm 4th instar, some silkworms can not survive without the bacteria that digest and absorb lettuce leaves. We suggest those dominant bacteria produced by the BLSS breeding way can be made probiotics then add to lettuce leaves to feed 4th instar silkworm. It is aimed at enhancing the nutrient absorption and resistance to disease regulated by silkworm gut, laying foundation for controlling the silkworm intestinal micro ecology in the BLSS, providing more high-quality animal protein for astronauts. Key word: BLSS, silkworm, dominant bacteria, gut microbial

Novel Polymerase Spiral Reaction (PSR) for rapid visual detection of Bovine Herpesvirus 1 genomic DNA from aborted bovine fetus and semen.

PubMed

Malla, Javed Ahmed; Chakravarti, Soumendu; Gupta, Vikas; Chander, Vishal; Sharma, Gaurav Kumar; Qureshi, Salauddin; Mishra, Adhiraj; Gupta, Vivek Kumar; Nandi, Sukdeb

2018-02-20

Bovine herpesvirus-1 (BHV-1) is a major viral pathogen affecting bovines leading to various clinical manifestations and causes significant economic impediment in modern livestock production system. Rapid, accurate and sensitive detection of BHV-1 infection at frozen semen stations or at dairy herds remains a priority for control of BHV-1 spread to susceptible population. Polymerase Spiral Reaction (PSR), a novel addition in the gamut of isothermal techniques, has been successfully implemented in initial optimization for detection of BHV-1 genomic DNA and further validated in clinical samples. The developed PSR assay has been validated for detection of BHV-1 from bovine semen (n=99), a major source of transmission of BHV-1 from breeding bulls to susceptible dams in artificial insemination programs. The technique has also been used for screening of BHV-1 DNA from suspected aborted fetal tissues (n=25). The developed PSR technique is 100 fold more sensitive than conventional PCR and comparable to real-time PCR. The PSR technique has been successful in detecting 13 samples positive for BHV-1 DNA in bovine semen, 4 samples more than conventional PCR. The aborted fetal tissues were negative for presence of BHV-1 DNA. The presence of BHV-1 in bovine semen samples raises a pertinent concern for extensively screening of semen from breeding bulls before been used for artificial insemination process. PSR has all the attributes for becoming a method of choice for rapid, accurate and sensitive detection of BHV-1 DNA at frozen semen stations or at dairy herds in resource constrained settings. Copyright © 2017 Elsevier B.V. All rights reserved.

Effect of sexed-semen use on Holstein conception rate, calf sex, dystocia, and stillbirth in the United States

USDA-ARS?s Scientific Manuscript database

Most artificial-insemination organizations in the United States now market sex-sorted semen. For 10.8 million US Holstein breedings with conventional semen since January 2006 and 122,705 sexed-semen breedings, data were available from all breedings for conception rate, 12 and 9% of breedings for cal...

Review of recent transgenic studies on abiotic stress tolerance and future molecular breeding in potato.

PubMed

Kikuchi, Akira; Huynh, Huu Duc; Endo, Tsukasa; Watanabe, Kazuo

2015-03-01

Global warming has become a major issue within the last decade. Traditional breeding programs for potato have focused on increasing productivity and quality and disease resistance, thus, modern cultivars have limited tolerance of abiotic stresses. The introgression of abiotic stress tolerance into modern cultivars is essential work for the future. Recently, many studies have investigated abiotic stress using transgenic techniques. This manuscript focuses on the study of abiotic stress, in particular drought, salinity and low temperature, during this century. Dividing studies into these three stress categories for this review was difficult. Thus, based on the study title and the transgene property, transgenic studies were classified into five categories in this review; oxidative scavengers, transcriptional factors, and above three abiotic categories. The review focuses on studies that investigate confer of stress tolerance and the identification of responsible factors, including wild relatives. From a practical application perspective, further evaluation of transgenic potato with abiotic stress tolerance is required. Although potato plants, including wild species, have a large potential for abiotic stress tolerance, exploration of the factors responsible for conferring this tolerance is still developing. Molecular breeding, including genetic engineering and conventional breeding using DNA markers, is expected to develop in the future.

Sugarcane Improvement Through Breeding and Biotechnology

USDA-ARS?s Scientific Manuscript database

The advancements in sugarcane breeding and the improvement of sugarcane through biotechnology have been reviewed by a team of leading sugarcane specialists from around the world. Topics covered in the breeding section include the evolution and origin of sugarcane, early history of conventional sugar...

Micropropagation systems of Feijoa (Acca sellowiana (O. Berg) Burret).

PubMed

Guerra, Miguel Pedro; Cangahuala-Inocente, Gabriela Claudia; Vesco, Lirio Luiz Dal; Pescador, Rosete; Caprestano, Clarissa Alves

2013-01-01

Acca sellowiana (O. Berg) Burret sin. Feijoa sellowiana (Myrtaceae) is a semiwoody fruit species native to South Brazil, Uruguay, and Argentina; edible fruits are tasty. The naturally occurring populations in Santa Catarina State show high variability in fruit size, color, and other features. A breeding program launched in 1990 resulted in the release of four Brazilian commercial varieties. The conventional clonal propagation methods of this species, such as cutting and grafting, have shown low efficiency. Therefore, tissue culture techniques were developed for mass propagation. This chapter describes several protocols based on organogenesis and somatic embryogenesis. Additional techniques including synthetic seed technology and temporary immersion system are also described.

Seasonal movements and environmental triggers to fall migration of Sage Sparrows

USGS Publications Warehouse

Fesenmyer, K.A.; Knick, S.T.

2011-01-01

Post-breeding ecology of shrubland passerines prior to onset of migration is unknown relative to dynamics of breeding areas. We radiomarked and monitored 38 Sage Sparrows (Amphispiza belli ssp. nevadensis) at one site in Oregon and two in Nevada from September to mid-November 2007 to track local movements, estimate seasonal range sizes, and characterize weather patterns triggering onset of migration. Median area used by Sage Sparrows monitored between 3 and 18 days during or prior to migration was 14 ha; maximum daily movement was 15 km. Radio-marked Sage Sparrows at each location departed individually, rather than en masse, corresponding with passage of cold front weather systems. Conventional telemetry techniques limited our ability to monitor Sage Sparrows beyond pre-migratory periods and precluded detecting and tracking actual movements during migration. ?? 2011 by the Wilson Ornithological Society.

Prediction of carotenoids, cyanide and dry matter contents in fresh cassava root using NIRS and Hunter color techniques.

PubMed

Sánchez, T; Ceballos, H; Dufour, D; Ortiz, D; Morante, N; Calle, F; Zum Felde, T; Domínguez, M; Davrieux, F

2014-05-15

Efforts are currently underway to improve carotenoids content in cassava roots through conventional breeding as a strategy to reduce vitamin A deficiency. However, only few samples can be quantified each day for total carotenoids (TCC) and β-carotene (TBC) contents, limiting the gains from breeding. A database with >3000 samples was used to evaluate the potential of NIRS and chromameter devices to predict root quality traits. Maximum TTC and TBC were up to 25.5 and 16.6 μg/g (fresh weight basis), respectively. NIRS predictions were highly satisfactory for dry matter content (DMC, R(2): 0.96), TCC (R(2): 0.92) and TBC (R(2): 0.93). NIRS could also distinguish roots with high or low cyanogenic potential (R(2): 0.86). Hunter color parameters could also be used for predictions, but with lower accuracy than NIRS. NIRS or chromameter improve selection protocols, allowing faster gains from breeding. Results also demonstrate that TBC and DMC can be improved simultaneously (required for the adoption of biofortified cassava). Copyright © 2013 Elsevier Ltd. All rights reserved.

Prediction of Breeding Values for Dairy Cattle Using Artificial Neural Networks and Neuro-Fuzzy Systems

PubMed Central

Shahinfar, Saleh; Mehrabani-Yeganeh, Hassan; Lucas, Caro; Kalhor, Ahmad; Kazemian, Majid; Weigel, Kent A.

2012-01-01

Developing machine learning and soft computing techniques has provided many opportunities for researchers to establish new analytical methods in different areas of science. The objective of this study is to investigate the potential of two types of intelligent learning methods, artificial neural networks and neuro-fuzzy systems, in order to estimate breeding values (EBV) of Iranian dairy cattle. Initially, the breeding values of lactating Holstein cows for milk and fat yield were estimated using conventional best linear unbiased prediction (BLUP) with an animal model. Once that was established, a multilayer perceptron was used to build ANN to predict breeding values from the performance data of selection candidates. Subsequently, fuzzy logic was used to form an NFS, a hybrid intelligent system that was implemented via a local linear model tree algorithm. For milk yield the correlations between EBV and EBV predicted by the ANN and NFS were 0.92 and 0.93, respectively. Corresponding correlations for fat yield were 0.93 and 0.93, respectively. Correlations between multitrait predictions of EBVs for milk and fat yield when predicted simultaneously by ANN were 0.93 and 0.93, respectively, whereas corresponding correlations with reference EBV for multitrait NFS were 0.94 and 0.95, respectively, for milk and fat production. PMID:22991575

[Transgenic rice breeding for abiotic stress tolerance--present and future].

PubMed

Zhao, Feng-Yun; Zhang, Hui

2007-01-01

Environmental stresses and the continuing deterioration of arable land, along with an explosive increase in world population, pose serious threats to global agricultural production and food security. Improving the tolerance of the major crop plants to abiotic stresses has been a main goal in agriculture for a long time. As rice is considered one of the major crops, the development of new cultivars with enhanced abiotic stress-tolerance will undoubtedly have an important effect on global food production. The transgenic approach offers an attractive alternative to conventional techniques for the genetic improvement of rice cultivars. In recent years, an array of stress-related genes has already been transferred to rice to improve its resistance against abiotic stresses. Many transgenic rice plants with enhanced abiotic stress-tolerance have been obtained. This article focuses on the progress in the study of abiotic stress tolerance in transgenic rice breeding.

The CRISPR/Cas Genome-Editing Tool: Application in Improvement of Crops

PubMed Central

Khatodia, Surender; Bhatotia, Kirti; Passricha, Nishat; Khurana, S. M. P.; Tuteja, Narendra

2016-01-01

The Clustered Regularly Interspaced Short Palindromic Repeats associated Cas9/sgRNA system is a novel targeted genome-editing technique derived from bacterial immune system. It is an inexpensive, easy, most user friendly and rapidly adopted genome editing tool transforming to revolutionary paradigm. This technique enables precise genomic modifications in many different organisms and tissues. Cas9 protein is an RNA guided endonuclease utilized for creating targeted double-stranded breaks with only a short RNA sequence to confer recognition of the target in animals and plants. Development of genetically edited (GE) crops similar to those developed by conventional or mutation breeding using this potential technique makes it a promising and extremely versatile tool for providing sustainable productive agriculture for better feeding of rapidly growing population in a changing climate. The emerging areas of research for the genome editing in plants include interrogating gene function, rewiring the regulatory signaling networks and sgRNA library for high-throughput loss-of-function screening. In this review, we have described the broad applicability of the Cas9 nuclease mediated targeted plant genome editing for development of designer crops. The regulatory uncertainty and social acceptance of plant breeding by Cas9 genome editing have also been described. With this powerful and innovative technique the designer GE non-GM plants could further advance climate resilient and sustainable agriculture in the future and maximizing yield by combating abiotic and biotic stresses. PMID:27148329

Towards development of new ornamental plants: status and progress in wide hybridization.

PubMed

Kuligowska, Katarzyna; Lütken, Henrik; Müller, Renate

2016-07-01

The present review provides insights into the key findings of the hybridization process, crucial factors affecting the adaptation of new technologies within wide hybridization of ornamental plants and presents perspectives of further development of this strategy. Wide hybridization is one of the oldest breeding techniques that contributed enormously to the development of modern plant cultivars. Within ornamental breeding, it represents the main source of genetic variation. During the long history of wide hybridization, a number of methods were implemented allowing the evolution from a conventional breeding tool into a modern methodology. Nowadays, the research on model plants and crop species increases our understanding of reproductive isolation among distant species and partly explains the background of the traditional approaches previously used for overcoming hybridization barriers. Characterization of parental plants and hybrids is performed using molecular and cytological techniques that strongly facilitate breeding processes. Molecular markers and sequencing technologies are used for the assessment of genetic relationships among plants, as the genetic distance is typically depicted as one of the most important factors influencing cross-compatibility in hybridization processes. Furthermore, molecular marker systems are frequently applied for verification of hybrid state of the progeny. The flow cytometry and genomic in situ hybridization are used in the assessment of hybridization partners and characterization of hybrid progeny in relation to genome stabilization as well as genome recombination and introgression. In the future, new research and technologies are likely to provide more detailed information about genes and pathways responsible for interspecific reproductive isolation. Ultimately, this knowledge will enable development of strategies for obtaining compatible lines for hybrid production. Recent development in sequencing technologies and availability of sequence data will also facilitate creation of new molecular markers that will advance marker-assisted selection in hybridization process.

Genomic assisted selection for enhancing line breeding: merging genomic and phenotypic selection in winter wheat breeding programs with preliminary yield trials.

PubMed

Michel, Sebastian; Ametz, Christian; Gungor, Huseyin; Akgöl, Batuhan; Epure, Doru; Grausgruber, Heinrich; Löschenberger, Franziska; Buerstmayr, Hermann

2017-02-01

Early generation genomic selection is superior to conventional phenotypic selection in line breeding and can be strongly improved by including additional information from preliminary yield trials. The selection of lines that enter resource-demanding multi-environment trials is a crucial decision in every line breeding program as a large amount of resources are allocated for thoroughly testing these potential varietal candidates. We compared conventional phenotypic selection with various genomic selection approaches across multiple years as well as the merit of integrating phenotypic information from preliminary yield trials into the genomic selection framework. The prediction accuracy using only phenotypic data was rather low (r = 0.21) for grain yield but could be improved by modeling genetic relationships in unreplicated preliminary yield trials (r = 0.33). Genomic selection models were nevertheless found to be superior to conventional phenotypic selection for predicting grain yield performance of lines across years (r = 0.39). We subsequently simplified the problem of predicting untested lines in untested years to predicting tested lines in untested years by combining breeding values from preliminary yield trials and predictions from genomic selection models by a heritability index. This genomic assisted selection led to a 20% increase in prediction accuracy, which could be further enhanced by an appropriate marker selection for both grain yield (r = 0.48) and protein content (r = 0.63). The easy to implement and robust genomic assisted selection gave thus a higher prediction accuracy than either conventional phenotypic or genomic selection alone. The proposed method took the complex inheritance of both low and high heritable traits into account and appears capable to support breeders in their selection decisions to develop enhanced varieties more efficiently.

GM foods: is there a way forward?

PubMed

Jones, Huw D

2015-08-01

There are many quality targets in cereals that could generate step-change improvements in nutritional or food-processing characteristics. For instance, levels of acrylamide, soluble and insoluble fibre, antioxidants, allergens and intolerance factors in food are, to a large extent, determined by the genetics of the raw materials used. However, improvements to these traits pose significant challenges to plant breeders. For some traits, this is because the underlying genetic and biochemical basis of the traits is not fully understood but for others, there is simply a lack of natural genetic variation in commercially useful germplasm. One strategy to overcome the latter hindrance is to use wide crosses with more exotic germplasm; however, this can bring other difficulties such as yield loss and linkage drag of deleterious alleles. As DNA sequencing becomes cheaper and faster, it drives the research fields of reverse genetics and functional genomics which in turn will enable the incorporation of desirable traits into crop varieties via molecular breeding and biotechnology. I will discuss the evolution of these techniques from conventional genetic modification to more recent developments in targeted gene editing and the potential of biotechnology to complement conventional breeding methods. I will also discuss the role of risk assessment and regulation in the commercialisation of GM crops.

Cotton regeneration in vitro

USDA-ARS?s Scientific Manuscript database

H. F. Sakhanokho and K. Rajasekaran Over the years, plant breeders have improved cotton via conventional breeding methods, but these methods are time-consuming. To complement classical breeding and, at times, reduce the time necessary for new cultivar development, breeders have turned to in vitro ...

Breeding approaches and genomics technologies to increase crop yield under low-temperature stress.

PubMed

Jha, Uday Chand; Bohra, Abhishek; Jha, Rintu

2017-01-01

Improved knowledge about plant cold stress tolerance offered by modern omics technologies will greatly inform future crop improvement strategies that aim to breed cultivars yielding substantially high under low-temperature conditions. Alarmingly rising temperature extremities present a substantial impediment to the projected target of 70% more food production by 2050. Low-temperature (LT) stress severely constrains crop production worldwide, thereby demanding an urgent yet sustainable solution. Considerable research progress has been achieved on this front. Here, we review the crucial cellular and metabolic alterations in plants that follow LT stress along with the signal transduction and the regulatory network describing the plant cold tolerance. The significance of plant genetic resources to expand the genetic base of breeding programmes with regard to cold tolerance is highlighted. Also, the genetic architecture of cold tolerance trait as elucidated by conventional QTL mapping and genome-wide association mapping is described. Further, global expression profiling techniques including RNA-Seq along with diverse omics platforms are briefly discussed to better understand the underlying mechanism and prioritize the candidate gene (s) for downstream applications. These latest additions to breeders' toolbox hold immense potential to support plant breeding schemes that seek development of LT-tolerant cultivars. High-yielding cultivars endowed with greater cold tolerance are urgently required to sustain the crop yield under conditions severely challenged by low-temperature.

Breed traceability of buffalo meat using microsatellite genotyping technique.

PubMed

Kannur, Bheemashankar H; Fairoze, Md Nadeem; Girish, P S; Karabasanavar, Nagappa; Rudresh, B H

2017-02-01

Although buffalo has emerged as a major meat producing animal in Asia, major research on breed traceability has so far been focused on cattle (beef). This research gap on buffalo breed traceability has impelled development and validation of buffalo breed traceability using a set of eight microsatellite (STR) markers in seven Indian buffalo breeds (Bhadawari, Jaffaarabadi, Murrah, Mehsana, Nagpuri, Pandharpuri and Surti). Probability of sharing same profile by two individuals at a specific locus was computed considering different STR numbers, allele pooling in breed and population. Match probabilities per breed were considered and six most polymorphic loci were genotyped. Out of eight microsatellite markers studied, markers CSSMO47, DRB3 and CSSM060 were found most polymorphic. Developed technique was validated with known and unknown, blood and meat samples; wherein, samples were genetically traced in 24 out of 25 samples tested. Results of this study showed potential applications of the methodology and encourage other researchers to address the problem of buffalo traceability so as to create a world-wide archive of breed specific genotypes. This work is the first report of breed traceability of buffalo meat utilizing microsatellite genotyping technique.

Can reliable sage-grouse lek counts be obtained using aerial infrared technology

USGS Publications Warehouse

Gillette, Gifford L.; Coates, Peter S.; Petersen, Steven; Romero, John P.

2013-01-01

More effective methods for counting greater sage-grouse (Centrocercus urophasianus) are needed to better assess population trends through enumeration or location of new leks. We describe an aerial infrared technique for conducting sage-grouse lek counts and compare this method with conventional ground-based lek count methods. During the breeding period in 2010 and 2011, we surveyed leks from fixed-winged aircraft using cryogenically cooled mid-wave infrared cameras and surveyed the same leks on the same day from the ground following a standard lek count protocol. We did not detect significant differences in lek counts between surveying techniques. These findings suggest that using a cryogenically cooled mid-wave infrared camera from an aerial platform to conduct lek surveys is an effective alternative technique to conventional ground-based methods, but further research is needed. We discuss multiple advantages to aerial infrared surveys, including counting in remote areas, representing greater spatial variation, and increasing the number of counted leks per season. Aerial infrared lek counts may be a valuable wildlife management tool that releases time and resources for other conservation efforts. Opportunities exist for wildlife professionals to refine and apply aerial infrared techniques to wildlife monitoring programs because of the increasing reliability and affordability of this technology.

Helping crops stand up to salt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raeburn, P.

1985-05-01

A new approach to the problem of increasing soil salinity is to raise salt-tolerant plants. The search for such plants involves finding new applications for naturally occurring salt-resistant plants (halophytes), using conventional breeding techniques to identify and strengthen crop varieties known to have better-than-average salt tolerance, and applying recombinant DNA methods to introduce salt resistance into existing plants. One promising plant is salicornia, which produces oil high in polyunsaturates at a greater yield than soybeans. Two varieties of atriplex yield as much animal feed as alfalfa and can be harvested several times a year. Seed companies are supporting the research.

An automated system for positive reinforcement training of group-housed macaque monkeys at breeding and research facilities.

PubMed

Tulip, Jennifer; Zimmermann, Jonas B; Farningham, David; Jackson, Andrew

2017-06-15

Behavioural training through positive reinforcement techniques is a well-recognised refinement to laboratory animal welfare. Behavioural neuroscience research requires subjects to be trained to perform repetitions of specific behaviours for food/fluid reward. Some animals fail to perform at a sufficient level, limiting the amount of data that can be collected and increasing the number of animals required for each study. We have implemented automated positive reinforcement training systems (comprising a button press task with variable levels of difficulty using LED cues and a fluid reward) at the breeding facility and research facility, to compare performance across these different settings, to pre-screen animals for selection and refine training protocols. Animals learned 1- and 4-choice button tasks within weeks of home enclosure training, with some inter-individual differences. High performance levels (∼200-300 trials per 60min session at ∼80% correct) were obtained without food or fluid restriction. Moreover, training quickly transferred to a laboratory version of the task. Animals that acquired the task at the breeding facility subsequently performed better both in early home enclosure sessions upon arrival at the research facility, and also in laboratory sessions. Automated systems at the breeding facility may be used to pre-screen animals for suitability for behavioural neuroscience research. In combination with conventional training, both the breeding and research facility systems facilitate acquisition and transference of learning. Automated systems have the potential to refine training protocols and minimise requirements for food/fluid control. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Evaluation of reproduction and raising offspring in a nursery-reared SPF baboon (Papio hamadryas anubis) colony.

PubMed

Budda, Madeline L; Ely, John J; Doan, Sandra; Chavez-Suarez, Maria; White, Gary L; Wolf, Roman F

2013-08-01

Baboons (Papio hamadryas anubis) of a conventional breeding colony were nursery-reared to create a specific pathogen-free (SPF) baboon-breeding program. Because the founding generations were nursery-reared until 2 years of age, it was suspected that the SPF baboons would exhibit increased reproductive challenges as adults. Mothering behavior was of interest, because SPF females were not exposed to parental role models during the nursery-rearing process. We compared reproductive data from the SPF baboon breeding program during its first 10 years with data from age-matched baboons during the same period from an established, genetically-similar conventional breeding colony. We also evaluated records documenting mother-infant behaviors within the SPF colony. The average age of menarche in SPF females was 3.3 years. The overall live birth rate of both SPF and conventional females was approximately 90%, with no difference in pregnancy outcome between the two colonies. The average age at first conception for SPF females was earlier (4.2 years) than that of the conventional females (4.7 years). In both colonies, primiparous females were more likely to abort than multiparous females. Similarly, primiparous females were more likely to lose their infants to death or human intervention. A mothering score system was developed in the SPF colony to facilitate intervention of poor mother-infant relationships. Records revealed 70% of SPF mothers were able to raise one or more of their infants successfully to at least 180 days of age, which did not differ from conventional mothers. SPF females returned to post-partum amenorrhea 27 days sooner on average than the conventional females, independent of dam age. The nursery-rearing process used for recruitment into the SPF colony therefore did not have an adverse effect on reproduction or rearing offspring. © 2013 Wiley Periodicals, Inc.

Gene Editing in Polyploid Crops: Wheat, Camelina, Canola, Potato, Cotton, Peanut, Sugar Cane, and Citrus.

PubMed

Weeks, Donald P

2017-01-01

Polyploid crops make up a significant portion of the major food and fiber crops of the world and include wheat, potato, cotton, apple, peanut, citrus, and brassica oilseeds such as rape, canola, and Camelina. The presence of three sets of chromosomes in triploids, four sets in tetraploids, and six sets in hexaploids present significant challenges to conventional plant breeding and, potentially, to efficient use of rapidly emerging gene and genome-editing systems such as zinc finger nucleases, single-stranded oligonucleotides, TALE effector nucleases, and clustered regularly interspaced short palindromic repeats (CRISPR/Cas9). However, recent studies with each of these techniques in several polyploid crops have demonstrated facile editing of some or all of the genes targeted for modification on homeologous chromosomes. These modifications have allowed improvements in food nutrition, seed oil composition, disease resistance, weed protection, plant breeding procedures, and food safety. Plants and plant products exhibiting useful new traits created through gene editing but lacking foreign DNA may face reduced regulatory restrictions. Such plants can be obtained either by simply selecting for null segregants that have lost their editing transgenes during plant breeding or, even more attractively, by delivery of biodegradable Cas9/sgRNA ribonucleoprotein complexes (i.e., no DNA) into plant cells where they are expressed only transiently but allow for efficient gene editing-a system that has been recently demonstrated in at least two polyploid crops. Such systems that create precise mutations but leave no transgene footprint hold potential promise for assisting with the elimination or great diminution of regulatory processes that presently burden approvals of conventional transgenic crops. © 2017 Elsevier Inc. All rights reserved.

Recent advances in peanut breeding and genetics

USDA-ARS?s Scientific Manuscript database

Most previous advances in peanut cultivar development have been made using conventional breeding methods for self-pollinated crops. Peanut has lagged behind many other crops on use of molecular genetic technology for cultivar development in part due to lack of investment, but also because of low le...

Genetic fingerprinting of potato varieties from the Northwest Potato Variety Development Program

USDA-ARS?s Scientific Manuscript database

The Northwest Potato Variety Development Program using conventional breeding has successfully released more than 40 improved varieties of potato since its inception in 1983. Potato breeders rely primarily on morphological and phenotypic data for selection and breeding of potato cultivars. With the a...

Efficient SNP Discovery by Combining Microarray and Lab-on-a-Chip Data for Animal Breeding and Selection

PubMed Central

Huang, Chao-Wei; Lin, Yu-Tsung; Ding, Shih-Torng; Lo, Ling-Ling; Wang, Pei-Hwa; Lin, En-Chung; Liu, Fang-Wei; Lu, Yen-Wen

2015-01-01

The genetic markers associated with economic traits have been widely explored for animal breeding. Among these markers, single-nucleotide polymorphism (SNPs) are gradually becoming a prevalent and effective evaluation tool. Since SNPs only focus on the genetic sequences of interest, it thereby reduces the evaluation time and cost. Compared to traditional approaches, SNP genotyping techniques incorporate informative genetic background, improve the breeding prediction accuracy and acquiesce breeding quality on the farm. This article therefore reviews the typical procedures of animal breeding using SNPs and the current status of related techniques. The associated SNP information and genotyping techniques, including microarray and Lab-on-a-Chip based platforms, along with their potential are highlighted. Examples in pig and poultry with different SNP loci linked to high economic trait values are given. The recommendations for utilizing SNP genotyping in nimal breeding are summarized. PMID:27600241

Oilseed rape (Brassica napus) as a resource for farmland insect pollinators: quantifying floral traits in conventional varieties and breeding systems.

PubMed

Carruthers, Jonathan M; Cook, Samantha M; Wright, Geraldine A; Osborne, Juliet L; Clark, Suzanne J; Swain, Jennifer L; Haughton, Alison J

2017-08-01

Oilseed rape (OSR; Brassica napus L.) is a major crop in temperate regions and provides an important source of nutrition to many of the yield-enhancing insect flower visitors that consume floral nectar. The manipulation of mechanisms that control various crop plant traits for the benefit of pollinators has been suggested in the bid to increase food security, but little is known about inherent floral trait expression in contemporary OSR varieties or the breeding systems used in OSR breeding programmes. We studied a range of floral traits in glasshouse-grown, certified conventional varieties of winter OSR to test for variation among and within breeding systems. We measured 24-h nectar secretion rate, amount, concentration and ratio of nectar sugars per flower, and sizes and number of flowers produced per plant from 24 varieties of OSR representing open-pollinated (OP), genic male sterility (GMS) hybrid and cytoplasmic male sterility (CMS) hybrid breeding systems. Sugar concentration was consistent among and within the breeding systems; however, GMS hybrids produced more nectar and more sugar per flower than CMS hybrid or OP varieties. With the exception of ratio of fructose/glucose in OP varieties, we found that nectar traits were consistent within all the breeding systems. When scaled, GMS hybrids produced 1.73 times more nectar resource per plant than OP varieties. Nectar production and amount of nectar sugar in OSR plants were independent of number and size of flowers. Our data show that floral traits of glasshouse-grown OSR differed among breeding systems, suggesting that manipulation and enhancement of nectar rewards for insect flower visitors, including pollinators, could be included in future OSR breeding programmes.

Jatropha curcas, a biofuel crop: Functional genomics for understanding metabolic pathways and genetic improvement

PubMed Central

Maghuly, Fatemeh; Laimer, Margit

2013-01-01

Jatropha curcas is currently attracting much attention as an oilseed crop for biofuel, as Jatropha can grow under climate and soil conditions that are unsuitable for food production. However, little is known about Jatropha, and there are a number of challenges to be overcome. In fact, Jatropha has not really been domesticated; most of the Jatropha accessions are toxic, which renders the seedcake unsuitable for use as animal feed. The seeds of Jatropha contain high levels of polyunsaturated fatty acids, which negatively impact the biofuel quality. Fruiting of Jatropha is fairly continuous, thus increasing costs of harvesting. Therefore, before starting any improvement program using conventional or molecular breeding techniques, understanding gene function and the genome scale of Jatropha are prerequisites. This review presents currently available and relevant information on the latest technologies (genomics, transcriptomics, proteomics and metabolomics) to decipher important metabolic pathways within Jatropha, such as oil and toxin synthesis. Further, it discusses future directions for biotechnological approaches in Jatropha breeding and improvement. PMID:24092674

New Breed of Mice May Improve Accuracy for Preclinical Testing of Cancer Drugs | FNLCR Staging

Cancer.gov

A new breed of lab animals, dubbed “glowing head mice,” may do a better job than conventional mice in predicting the success of experimental cancer drugs—while also helping to meet an urgent need for more realistic preclinical animal models. Th

QTLs detected for individual sugars and soluble solids content in apple

USDA-ARS?s Scientific Manuscript database

Sweetness is one of the most important fruit quality traits in breeding programs, determining the overall quality and flavor-perception of apples. Selecting for this trait using conventional breeding methods is challenging due to the complexity of its genetic control. In order to improve the efficie...

Effective autodissemination of pyriproxyfen to breeding sites by the exophilic malaria vector Anopheles arabiensis in semi-field settings in Tanzania.

PubMed

Lwetoijera, Dickson; Harris, Caroline; Kiware, Samson; Dongus, Stefan; Devine, Gregor J; McCall, Philip J; Majambere, Silas

2014-04-29

Malaria vector control strategies that target adult female mosquitoes are challenged by the emergence of insecticide resistance and behavioural resilience. Conventional larviciding is restricted by high operational costs and inadequate knowledge of mosquito-breeding habitats in rural settings that might be overcome by the juvenile hormone analogue, Pyriproxyfen (PPF). This study assessed the potential for Anopheles arabiensis to pick up and transfer lethal doses of PPF from contamination sites to their breeding habitats (i.e. autodissemination of PPF). A semi-field system (SFS) with four identical separate chambers was used to evaluate PPF-treated clay pots for delivering PPF to resting adult female mosquitoes for subsequent autodissemination to artificial breeding habitats within the chambers. In each chamber, a tethered cow provided blood meals to laboratory-reared, unfed female An. arabiensis released in the SFS. In PPF-treated chambers, clay pot linings were dusted with 0.2 - 0.3 g AI PPF per pot. Pupae were removed from the artificial habitats daily, and emergence rates calculated. Impact of PPF on emergence was determined by comparing treatment with an appropriate control group. Mean (95% CI) adult emergence rates were (0.21 ± 0.299) and (0.95 ± 0.39) from PPF-treated and controls respectively (p < 0.0001). Laboratory bioassay of water samples from artificial habitats in these experiments resulted in significantly lower emergence rates in treated chambers (0.16 ± 0.23) compared to controls 0.97 ± 0.05) (p < 0.0001). In experiments where no mosquitoes introduced, there were no significant differences between control and treatment, indicating that transfer of PPF to breeding sites only occurred when mosquitoes were present; i.e. that autodissemination had occurred. Treatment of a single clay pot reduced adult emergence in six habitats to (0.34 ± 0.13) compared to (0.98 ± 0.02) in the controls (p < 0.0001), showing a high level of habitats coverage amplification of the autodissemination event. The study provides proof of principle for the autodissemination of PPF to breeding habitats by malaria vectors. These findings highlight the potential for this technique for outdoor control of malaria vectors and call for the testing of this technique in field trials.

Effective autodissemination of pyriproxyfen to breeding sites by the exophilic malaria vector Anopheles arabiensis in semi-field settings in Tanzania

PubMed Central

2014-01-01

Background Malaria vector control strategies that target adult female mosquitoes are challenged by the emergence of insecticide resistance and behavioural resilience. Conventional larviciding is restricted by high operational costs and inadequate knowledge of mosquito-breeding habitats in rural settings that might be overcome by the juvenile hormone analogue, Pyriproxyfen (PPF). This study assessed the potential for Anopheles arabiensis to pick up and transfer lethal doses of PPF from contamination sites to their breeding habitats (i.e. autodissemination of PPF). Methods A semi-field system (SFS) with four identical separate chambers was used to evaluate PPF-treated clay pots for delivering PPF to resting adult female mosquitoes for subsequent autodissemination to artificial breeding habitats within the chambers. In each chamber, a tethered cow provided blood meals to laboratory-reared, unfed female An. arabiensis released in the SFS. In PPF-treated chambers, clay pot linings were dusted with 0.2 – 0.3 g AI PPF per pot. Pupae were removed from the artificial habitats daily, and emergence rates calculated. Impact of PPF on emergence was determined by comparing treatment with an appropriate control group. Results Mean (95% CI) adult emergence rates were (0.21 ± 0.299) and (0.95 ± 0.39) from PPF-treated and controls respectively (p < 0.0001). Laboratory bioassay of water samples from artificial habitats in these experiments resulted in significantly lower emergence rates in treated chambers (0.16 ± 0.23) compared to controls 0.97 ± 0.05) (p < 0.0001). In experiments where no mosquitoes introduced, there were no significant differences between control and treatment, indicating that transfer of PPF to breeding sites only occurred when mosquitoes were present; i.e. that autodissemination had occurred. Treatment of a single clay pot reduced adult emergence in six habitats to (0.34 ± 0.13) compared to (0.98 ± 0.02) in the controls (p < 0.0001), showing a high level of habitats coverage amplification of the autodissemination event. Conclusion The study provides proof of principle for the autodissemination of PPF to breeding habitats by malaria vectors. These findings highlight the potential for this technique for outdoor control of malaria vectors and call for the testing of this technique in field trials. PMID:24779515

Conventional bone plate fixation of distal radius and ulna fractures in toy breed dogs.

PubMed

Ramírez, J M; Macías, C

2016-03-01

To describe the outcome of bone plate fixation of distal radius and ulna fractures in toy breed dogs treated with conventional bone plates. Records of 15 toy breed dogs with distal radius and ulna fractures were retrospectively reviewed for signalment, method of fixation, complications and clinical and radiographic assessments. A telephone-based owner questionnaire was conducted to determine long-term function and client satisfaction. Age ranged from 4 months to 6 years. Body weight ranged from 1 to 4 kg. Dynamic compression plates were used in 13 dogs and veterinary cuttable plates were used in 2 dogs as the means of fixation. Full radiographic and clinical follow-up data were available for 10 dogs and follow-up was performed between 6 and 8 weeks postoperatively. At that time, all fractures had healed and return to function was considered excellent in all 10 dogs. Five dogs did not return for hospital evaluation because they were judged by their owners to be free of lameness. In two cases, owners could not be contacted by telephone, but the referring veterinarians reported the dogs to be asymptomatic. No major complications occurred. Conventional bone plates are suitable choices for stabilisation of distal radius and ulna fractures in toy breed dogs and are not necessarily correlated with high rates of complication. © 2016 Australian Veterinary Association.

Breeding of carnations (Dianthus caryophyllus L.) for long vase life.

PubMed

Onozaki, Takashi

2018-01-01

Carnation ( Dianthus caryophyllus L.) is one of the main floricultural crops in Japan and worldwide. The vase life of cut ornamental flowers, including carnations, is important in determining their quality and consumers' preference. To improve the vase life of carnation flowers, my group started a breeding research program in 1992 using conventional cross-breeding techniques. We repeatedly crossed and selected promising offspring with long vase life for seven generations, from 1992 to 2008. In 2005, we developed two cultivars, 'Miracle Rouge' and 'Miracle Symphony', with genetically determined long vase lives of 17.7 to 20.7 days (3.2 to 3.6 times that of 'White Sim') under standard conditions (23°C, 70% RH, 12-h photoperiod). Line 532-6 showed an ultra-long vase life averaging 27.8 to 32.7 days (4.6 to 5.4 times that of 'White Sim'). We evaluated changes in ethylene sensitivity with flower senescence simply and accurately using a time-lapse video recorder. In 2010, we selected line 806-46b with both ultra-long vase life (27.1 days, 4.4 times that of 'White Sim') and ethylene resistance. Analyses using six cultivars and 123 selected lines from the 1st to the 7th generations revealed that the long vase life was strongly associated with a decrease in ethylene production.

Genomics and molecular breeding in lesser explored pulse crops: current trends and future opportunities.

PubMed

Bohra, Abhishek; Jha, Uday Chand; Kishor, P B Kavi; Pandey, Shailesh; Singh, Narendra P

2014-12-01

Pulses are multipurpose crops for providing income, employment and food security in the underprivileged regions, notably the FAO-defined low-income food-deficit countries. Owing to their intrinsic ability to endure environmental adversities and the least input/management requirements, these crops remain central to subsistence farming. Given their pivotal role in rain-fed agriculture, substantial research has been invested to boost the productivity of these pulse crops. To this end, genomic tools and technologies have appeared as the compelling supplement to the conventional breeding. However, the progress in minor pulse crops including dry beans (Vigna spp.), lupins, lablab, lathyrus and vetches has remained unsatisfactory, hence these crops are often labeled as low profile or lesser researched. Nevertheless, recent scientific and technological breakthroughs particularly the next generation sequencing (NGS) are radically transforming the scenario of genomics and molecular breeding in these minor crops. NGS techniques have allowed de novo assembly of whole genomes in these orphan crops. Moreover, the availability of a reference genome sequence would promote re-sequencing of diverse genotypes to unlock allelic diversity at a genome-wide scale. In parallel, NGS has offered high-resolution genetic maps or more precisely, a robust genetic framework to implement whole-genome strategies for crop improvement. As has already been demonstrated in lupin, sequencing-based genotyping of the representative sample provided access to a number of functionally-relevant markers that could be deployed straight away in crop breeding programs. This article attempts to outline the recent progress made in genomics of these lesser explored pulse crops, and examines the prospects of genomics assisted integrated breeding to enhance and stabilize crop yields. Copyright © 2014 Elsevier Inc. All rights reserved.

Genomic Tools in Cowpea Breeding Programs: Status and Perspectives

PubMed Central

Boukar, Ousmane; Fatokun, Christian A.; Huynh, Bao-Lam; Roberts, Philip A.; Close, Timothy J.

2016-01-01

Cowpea is one of the most important grain legumes in sub-Saharan Africa (SSA). It provides strong support to the livelihood of small-scale farmers through its contributions to their nutritional security, income generation and soil fertility enhancement. Worldwide about 6.5 million metric tons of cowpea are produced annually on about 14.5 million hectares. The low productivity of cowpea is attributable to numerous abiotic and biotic constraints. The abiotic stress factors comprise drought, low soil fertility, and heat while biotic constraints include insects, diseases, parasitic weeds, and nematodes. Cowpea farmers also have limited access to quality seeds of improved varieties for planting. Some progress has been made through conventional breeding at international and national research institutions in the last three decades. Cowpea improvement could also benefit from modern breeding methods based on molecular genetic tools. A number of advances in cowpea genetic linkage maps, and quantitative trait loci associated with some desirable traits such as resistance to Striga, Macrophomina, Fusarium wilt, bacterial blight, root-knot nematodes, aphids, and foliar thrips have been reported. An improved consensus genetic linkage map has been developed and used to identify QTLs of additional traits. In order to take advantage of these developments single nucleotide polymorphism (SNP) genotyping is being streamlined to establish an efficient workflow supported by genotyping support service (GSS)-client interactions. About 1100 SNPs mapped on the cowpea genome were converted by LGC Genomics to KASP assays. Several cowpea breeding programs have been exploiting these resources to implement molecular breeding, especially for MARS and MABC, to accelerate cowpea variety improvement. The combination of conventional breeding and molecular breeding strategies, with workflow managed through the CGIAR breeding management system (BMS), promises an increase in the number of improved varieties available to farmers, thereby boosting cowpea production and productivity in SSA. PMID:27375632

Integrating molecular tools and conventional approaches in the Oregon State University hazelnut breeding program

Treesearch

Shawn A. Mehlenbacher

2012-01-01

The Oregon State University (OSU) hazelnut breeding program, initiated in 1969, continues to develop new cultivars for the hazelnut industry that combine suitability to the blanched kernel market with resistance to eastern filbert blight (EFB) caused by Anisogramma anomala. Oregon's hazelnut growers support the program through the Oregon...

Molecular marker-assisted breeding for maize improvement in Asia

USDA-ARS?s Scientific Manuscript database

Maize is one of the most important food and feed crops in Asia, and is a source of income for several million farmers. Despite impressive progress made in the last few decades through conventional breeding in the “Asia-7” (China, India, Indonesia, Nepal, Philippines, Thailand and Vietnam), average m...

An Update on Genetic Modification of Chickpea for Increased Yield and Stress Tolerance.

PubMed

Kumar, Manoj; Yusuf, Mohd Aslam; Nigam, Manisha; Kumar, Manoj

2018-06-26

Chickpea is a highly nutritious grain legume crop, widely appreciated as a health food, especially in the Indian subcontinent. The major constraints on chickpea production are biotic (Helicoverpa, bruchid, aphid, ascochyta) and abiotic (drought, heat, salt, cold) stresses, which reduce the yield by up to 90%. Various strategies like conventional breeding, molecular breeding, and modern plant breeding have been used to overcome these problems. Conventionally, breeding programs aim at development of varieties that combine maximum number of traits through inter-specific hybridization, wide hybridization, and hybridization involving more than two parents. Breeding is difficult in this crop because of its self-pollinating nature and limited genetic variation. Recent advances in in vitro culture and gene technologies offer unique opportunities to realize the full potential of chickpea production. However, as of date, no transgenic chickpea variety has been approved for cultivation in the world. In this review, we provide an update on the development of genetically modified chickpea plants, including those resistant to Helicoverpa armigera, Callosobruchus maculatus, Aphis craccivora, as well as to drought and salt stress. The genes utilized for development of resistance against pod borer, bruchid, aphid, drought, and salt tolerance, namely, Bt, alpha amylase inhibitor, ASAL, P5CSF129A, and P5CS, respectively, are discussed.

Application of overall dynamic body acceleration as a proxy for estimating the energy expenditure of grazing farm animals: relationship with heart rate.

PubMed

Miwa, Masafumi; Oishi, Kazato; Nakagawa, Yasuhiro; Maeno, Hiromichi; Anzai, Hiroki; Kumagai, Hajime; Okano, Kanji; Tobioka, Hisaya; Hirooka, Hiroyuki

2015-01-01

Estimating the energy expenditure of farm animals at pasture is important for efficient animal management. In recent years, an alternative technique for estimating energy expenditure by measuring body acceleration has been widely performed in wildlife and human studies, but the availability of the technique in farm animals has not yet been examined. In the present study, we tested the potential use of an acceleration index, overall dynamic body acceleration (ODBA), as a new proxy for estimating the energy expenditure of grazing farm animals (cattle, goats and sheep) at pasture with the simultaneous evaluation of a conventional proxy, heart rate. Body accelerations in three axes and heart rate for cows (n = 8, two breeds), goats (n = 6) and sheep (n = 5) were recorded, and the effect of ODBA calculated from the body accelerations on heart rate was analyzed. In addition, the effects of the two other activity indices, the number of steps and vectorial dynamic body acceleration (VeDBA), on heart rate were also investigated. The results of the comparison among three activity indices indicated that ODBA was the best predictor for heart rate. Although the relationship between ODBA and heart rate was different between the groups of species and breeds and between individuals (P<0.01), the difference could be explained by different body weights; a common equation could be established by correcting the body weights (M: kg): heart rate (beats/min) = 147.263∙M-0.141 + 889.640∙M-0.179∙ODBA (g). Combining this equation with the previously reported energy expenditure per heartbeat, we estimated the energy expenditure of the tested animals, and the results indicated that ODBA is a good proxy for estimating the energy expenditure of grazing farm animals across species and breeds. The utility and simplicity of the procedure with acceleration loggers could make the accelerometry technique a worthwhile option in field research and commercial farm use.

Improving breeding efficiency in potato using molecular and quantitative genetics.

PubMed

Slater, Anthony T; Cogan, Noel O I; Hayes, Benjamin J; Schultz, Lee; Dale, M Finlay B; Bryan, Glenn J; Forster, John W

2014-11-01

Potatoes are highly heterozygous and the conventional breeding of superior germplasm is challenging, but use of a combination of MAS and EBVs can accelerate genetic gain. Cultivated potatoes are highly heterozygous due to their outbreeding nature, and suffer acute inbreeding depression. Modern potato cultivars also exhibit tetrasomic inheritance. Due to this genetic heterogeneity, the large number of target traits and the specific requirements of commercial cultivars, potato breeding is challenging. A conventional breeding strategy applies phenotypic recurrent selection over a number of generations, a process which can take over 10 years. Recently, major advances in genetics and molecular biology have provided breeders with molecular tools to accelerate gains for some traits. Marker-assisted selection (MAS) can be effectively used for the identification of major genes and quantitative trait loci that exhibit large effects. There are also a number of complex traits of interest, such as yield, that are influenced by a large number of genes of individual small effect where MAS will be difficult to deploy. Progeny testing and the use of pedigree in the analysis can provide effective identification of the superior genetic factors that underpin these complex traits. Recently, it has been shown that estimated breeding values (EBVs) can be developed for complex potato traits. Using a combination of MAS and EBVs for simple and complex traits can lead to a significant reduction in the length of the breeding cycle for the identification of superior germplasm.

[DNA marker-assisted selection of medicinal plants (Ⅰ) .Breeding research of disease-resistant cultivars of Panax notoginseng].

PubMed

Dong, Lin-Lin; Chen, Zhong-Jian; Wang, Yong; Wei, Fu-Gang; Zhang, Lian-Juan; Xu, Jiang; Wei, Guang-Fei; Wang, Rui; Yang, Juan; Liu, Wei-Lin; Li, Xi-Wen; Yu, Yu-Qi; Chen, Shi-Lin

2017-01-01

DNA marker-assisted selection of medicinal plants is based on the DNA polymorphism, selects the DNA sequences related to the phenotypes such as high yields, superior quality, stress-resistance and so on according to the technologies of molecular hybridization, polymerase chain reaction and high-throughput sequencing, and assists the breeding of new cultivars. This study bred the first disease-resistant cultivar of notoginseng "Miaoxiang Kangqi 1" using the technology of DNA marker-assisted selection of medicinal plants and systematic breeding. The disease-resistant cultivar of notoginseng contained 12 special SNPs based on the analysis of Restriction-site Associated DNA Sequencing (RAD-Seq). Among the SNP (record_519688) was related to the root rot-resistant characteristics, which indicated this SNP could serve as genetic markers of disease-resistant cultivars and assist the systematic breeding. Compared to the conventional cultivated cultivars, the incidence rate of root-rot and rust-rot in notoginseng seedlings decreased by 83.6% and 71.8%, respectively. The incidence rate of root-rot respectively declined by 43.6% and 62.9% in notoginseng cultivation for 2 and 3 years compared with those of the conventional cultivated cultivars. Additionally, the potential disease-resistant groups were screened based on the relative SNP, and this model enlarged the target groups and advanced the breeding efficiency. DNA marker-assisted selection of medicinal plants accelerated the breeding and promotion of new cultivars, and guaranteed the healthy development of Chinese medicinal materials industry. Copyright© by the Chinese Pharmaceutical Association.

Veterinary Aspects of Bird of Prey Reproduction.

PubMed

Bailey, Tom A; Lierz, Michael

2017-05-01

Captive breeding has contributed to successful restoration of many species of birds of prey. Avicultural techniques pioneered by raptor breeders include double clutching, direct fostering, cross-fostering, hatch and switch, hacking, imprinting male and female falcons for semen collection, and artificial insemination techniques. However, reproductive failure occurs related to management problems, including hygiene measures, food quality issues, breeding flock structure, or individual health issues of breeding birds. These may result in non-egg laying females, low-quality eggs, or infertile eggs caused by male infertility. Veterinary care of breeding collections is extremely important. This article provides an overview of veterinary involvement in raptor breeding projects. Copyright © 2016 Elsevier Inc. All rights reserved.

Current status and biotechnological advances in genetic engineering of ornamental plants.

PubMed

Azadi, Pejman; Bagheri, Hedayat; Nalousi, Ayoub Molaahmad; Nazari, Farzad; Chandler, Stephen F

2016-11-01

Cut flower markets are developing in many countries as the international demand for cut flowers is rapidly growing. Developing new varieties with modified characteristics is an important aim in floriculture. Production of transgenic ornamental plants can shorten the time required in the conventional breeding of a cultivar. Biotechnology tools in combination with conventional breeding methods have been used by cut flower breeders to change flower color, plant architecture, post-harvest traits, and disease resistance. In this review, we describe advances in genetic engineering that have led to the development of new cut flower varieties. Copyright © 2016 Elsevier Inc. All rights reserved.

[Virus resistance in transgenic watermelon plants containing a WMV-2 coat protein gene].

PubMed

Wang, Hui-Zhong; Zhao, Pei-Jie; Xu, Ji-Chen; Zhao, Huai; Zhang, Hong-Sheng

2003-01-01

Virus disease is a major cause that affects the quality and output of watermelon which is an important fruit in summer. So it is really urgent to develop disease resistance plants. But it takes a long time to breed such plants in conventional ways, and it is very difficult to get ideal result. With the development of plant genetic engineering, new ways have been found to breed plants with disease resistance. By using plant transgenic technique, much progress was been made in plant improvement. There are many successful cases of transgenic plants against corresponding virus disease through transferring coat protein gene. This paper reports the results of inheritance, segregation, expression of WMV-2 coat protein gene in inbred transgenic watermelon and its resistance to virus. Through PCR analysis of inbred plants, we found WMV-2 coat protein gene in the genome of progeny R1 separated with 3:1. After successive selection and identification of 4 generations, 8 transgenic pure lines with almost the same agronomic traits were obtained from 3 independent transformants of T7, T11 and T32. The result of Western blotting shows all 3 different transgenic lines of R4T7-1, R4T11-3 and R4T32-7 can produce coat protein. Disease resistance experiment on transgenic plants with WMV-2 shows that, compared with the control groups, transgenic plants can delay the disease infection and reduce the incidence and the symptoms of virus disease. And the transgenic line R4T32-7 expressed high resistance to infection by WMV-2, which lays a foundation for breeding of disease resistant varieties through plant transgenic technique.

Identification of major genes affecting nutritional element concentrations in rice grains

USDA-ARS?s Scientific Manuscript database

Biofortification is the process by which the nutritional quality of food crops is improved through conventional plant breeding and/or use of biotechnology. Biofortification differs from conventional fortification in that biofortification aims to increase nutrient levels in crops during plant growth...

Developments in European horse breeding and consequences for veterinarians in equine reproduction.

PubMed

Aurich, J; Aurich, C

2006-08-01

The liberalization of European animal breeding legislation and an increasing diversity of equestrian sports have led to a constant rise in the number of horse breeds and breed registries. In addition to the trend towards more and smaller breed registries, there is another trend towards an international expansion of the bigger established sport horse breeds. Regional breeds, at least in smaller countries, may no longer be able to run an independent breeding programme. The typical horse breeder, in the future, will be a female and qualified in equestrian sports. Artificial insemination (AI) mainly with fresh or cooled-transported semen has become a major breeding tool, allowing breeders all over Europe to benefit from the best stallions of most breeds. New AI techniques such as low-dose insemination may remain restricted to individual stallions and also the interest of breeding programmes in sex determination of foals via semen sorting is limited. Embryo transfer and associated techniques, although allowed by most breeds, have not contributed significantly to genetic progress in European sport horses so far. A potential use of cloning may be to produce gonad-intact copies from geldings that have performed to a superior level. With a more open and international structure of horse breeding and increased use of AI, equine reproduction and biotechnology should be emphasized by veterinary curricula and continuing professional education programmes.

Genomics-assisted breeding in fruit trees.

PubMed

Iwata, Hiroyoshi; Minamikawa, Mai F; Kajiya-Kanegae, Hiromi; Ishimori, Motoyuki; Hayashi, Takeshi

2016-01-01

Recent advancements in genomic analysis technologies have opened up new avenues to promote the efficiency of plant breeding. Novel genomics-based approaches for plant breeding and genetics research, such as genome-wide association studies (GWAS) and genomic selection (GS), are useful, especially in fruit tree breeding. The breeding of fruit trees is hindered by their long generation time, large plant size, long juvenile phase, and the necessity to wait for the physiological maturity of the plant to assess the marketable product (fruit). In this article, we describe the potential of genomics-assisted breeding, which uses these novel genomics-based approaches, to break through these barriers in conventional fruit tree breeding. We first introduce the molecular marker systems and whole-genome sequence data that are available for fruit tree breeding. Next we introduce the statistical methods for biparental linkage and quantitative trait locus (QTL) mapping as well as GWAS and GS. We then review QTL mapping, GWAS, and GS studies conducted on fruit trees. We also review novel technologies for rapid generation advancement. Finally, we note the future prospects of genomics-assisted fruit tree breeding and problems that need to be overcome in the breeding.

Genomics-assisted breeding in fruit trees

PubMed Central

Iwata, Hiroyoshi; Minamikawa, Mai F.; Kajiya-Kanegae, Hiromi; Ishimori, Motoyuki; Hayashi, Takeshi

2016-01-01

Recent advancements in genomic analysis technologies have opened up new avenues to promote the efficiency of plant breeding. Novel genomics-based approaches for plant breeding and genetics research, such as genome-wide association studies (GWAS) and genomic selection (GS), are useful, especially in fruit tree breeding. The breeding of fruit trees is hindered by their long generation time, large plant size, long juvenile phase, and the necessity to wait for the physiological maturity of the plant to assess the marketable product (fruit). In this article, we describe the potential of genomics-assisted breeding, which uses these novel genomics-based approaches, to break through these barriers in conventional fruit tree breeding. We first introduce the molecular marker systems and whole-genome sequence data that are available for fruit tree breeding. Next we introduce the statistical methods for biparental linkage and quantitative trait locus (QTL) mapping as well as GWAS and GS. We then review QTL mapping, GWAS, and GS studies conducted on fruit trees. We also review novel technologies for rapid generation advancement. Finally, we note the future prospects of genomics-assisted fruit tree breeding and problems that need to be overcome in the breeding. PMID:27069395

77 FR 25192 - Wild Bird Conservation Act; Receipt of Application for Approval of a Cooperative Breeding Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... Conservation Act of 1992 (WBCA). DATES: Written data, comments, or requests for a copy of this application must... to the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). Under...-FF09A30000] Wild Bird Conservation Act; Receipt of Application for Approval of a Cooperative Breeding Program...

Walnut genetic improvement at the start of a new century

Treesearch

Keith E. Woeste; James R. McKenna

2004-01-01

Since the early 1960s, researchers in programs to improve black walnut for timber have struggled to meet some basic breeding objectives. Promising avenues of research had been identified by the early 1950s, and conventional methods to breed forest trees were widely adopted as suitable for walnut. Progress has been slow however, due to practical problems related to...

Danish A.I. field data with sexed semen.

PubMed

Borchersen, S; Peacock, M

2009-01-01

The objective of this study was to compare conception rates, non-return rates and sex ratios of sexed and conventional semen from the same sires in commercial dairy herds in Denmark. The semen was produced from three bulls from each of the three major dairy breeds in Denmark: Holstein, Jersey and Danish Red Dairy Breed (nine bulls total), in order to answer questions on breeds differences in field results. AI was performed by trained technicians using a minimum of 150 doses of sorted sperm and 50 control doses from each bull. During the trial, a total of 2087 doses were used in 63 herds. The trial showed that the conception rate using sorted semen was 5% points lower than with conventional doses for Danish Reds, 7% points for Jerseys, and 12% points for Holsteins. Translating this into non-return rate revealed differences of 10-20% points among bulls. These differences are thought to be a good indicator of what to expect from commercial use of sexed semen. The sex ratios varied from 89% to 93% female calves among breeds, which on average is consistent with the theoretical average sex ratio of 93% females considering the low number of inseminations.

Isolation of industrial strains of Aspergillus oryzae lacking ferrichrysin by disruption of the dffA gene.

PubMed

Watanabe, Hisayuki; Hatakeyama, Makoto; Sakurai, Hiroshi; Uchimiya, Hirofumi; Sato, Toshitsugu

2008-11-01

Based on studies using laboratory strains, the efficiency of gene disruption in Aspergillus oryzae, commonly known as koji mold, is low; thus, gene disruption has rarely been applied to the breeding of koji mold. To evaluate the efficiency of gene disruption in industrial strains of A. oryzae, we produced ferrichrysin biosynthesis gene (dffA) disruptants using three different industrial strains as hosts. PCR analysis of 438 pyrithiamine-resistant transformants showed dffA gene disruption efficiency of 42.9%-64.1%, which is much higher than previously reported. Analysis of the physiological characteristics of the disruptants indicated that dffA gene disruption results in hypersensitivity to hydrogen peroxide. To investigate the industrial characteristics of dffA gene disruptants, two strains were used to make rice koji and their properties were compared to those of the host strains. No differences were found between the dffA gene disruptants and the host strains, except that the disruptants did not produce ferrichrysin. Thus, this gene disruption technique is much more effective than conventional mutagenesis for A. oryzae breeding.

Jatropha curcas, a biofuel crop: functional genomics for understanding metabolic pathways and genetic improvement.

PubMed

Maghuly, Fatemeh; Laimer, Margit

2013-10-01

Jatropha curcas is currently attracting much attention as an oilseed crop for biofuel, as Jatropha can grow under climate and soil conditions that are unsuitable for food production. However, little is known about Jatropha, and there are a number of challenges to be overcome. In fact, Jatropha has not really been domesticated; most of the Jatropha accessions are toxic, which renders the seedcake unsuitable for use as animal feed. The seeds of Jatropha contain high levels of polyunsaturated fatty acids, which negatively impact the biofuel quality. Fruiting of Jatropha is fairly continuous, thus increasing costs of harvesting. Therefore, before starting any improvement program using conventional or molecular breeding techniques, understanding gene function and the genome scale of Jatropha are prerequisites. This review presents currently available and relevant information on the latest technologies (genomics, transcriptomics, proteomics and metabolomics) to decipher important metabolic pathways within Jatropha, such as oil and toxin synthesis. Further, it discusses future directions for biotechnological approaches in Jatropha breeding and improvement. © 2013 The Authors. Biotechnology Journal published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A protocol for rat in vitro fertilization during conventional laboratory working hours.

PubMed

Aoto, Toshihiro; Takahashi, Ri-ichi; Ueda, Masatsugu

2011-12-01

In vitro fertilization (IVF) is a valuable technique for the propagation of experimental animals. IVF has typically been used in mice to rapidly expand breeding colonies and create large numbers of embryos. However, applications of IVF in rat breeding experiments have stalled due to the inconvenient laboratory work schedules imposed by current IVF protocols for this species. Here, we developed a new rat IVF protocol that consists of experimental steps performed during common laboratory working hours. Our protocol can be completed within 12 h by shortening the period of sperm capacitation from 5 to 1 h and the fertilization time from 10 to 8 h in human tubal fluid (HTF) medium. This new protocol generated an excellent birth rate and was applicable not only to closed colony rat strains, such as Wistar, Long-Evans, and Sprague-Dawley (SD), but also to the inbred Lewis strain. Moreover, Wistar and Long-Evans embryos prepared by this protocol were successfully frozen by vitrification and later successfully thawed and resuscitated. This protocol is practical and can be easily adopted by laboratory workers.

Fully-Automated High-Throughput NMR System for Screening of Haploid Kernels of Maize (Corn) by Measurement of Oil Content

PubMed Central

Xu, Xiaoping; Huang, Qingming; Chen, Shanshan; Yang, Peiqiang; Chen, Shaojiang; Song, Yiqiao

2016-01-01

One of the modern crop breeding techniques uses doubled haploid plants that contain an identical pair of chromosomes in order to accelerate the breeding process. Rapid haploid identification method is critical for large-scale selections of double haploids. The conventional methods based on the color of the endosperm and embryo seeds are slow, manual and prone to error. On the other hand, there exists a significant difference between diploid and haploid seeds generated by high oil inducer, which makes it possible to use oil content to identify the haploid. This paper describes a fully-automated high-throughput NMR screening system for maize haploid kernel identification. The system is comprised of a sampler unit to select a single kernel to feed for measurement of NMR and weight, and a kernel sorter to distribute the kernel according to the measurement result. Tests of the system show a consistent accuracy of 94% with an average screening time of 4 seconds per kernel. Field test result is described and the directions for future improvement are discussed. PMID:27454427

Effects of month of breeding on reproductive efficiency of Holstein cows and heifers inseminated with sex-sorted or conventional semen in a hot environment.

PubMed

Mellado, Miguel; Sepulveda, Edgar; Macias-Cruz, Ulises; Avendaño, Leonel; Garcia, Jose E; Veliz, Francisco G; Rodríguez, Alvaro

2014-01-01

The main objective of this study was to assess the effect of month of breeding on reproduction performance of Holstein heifers and cows inseminated with sex-sorted or conventional semen in a hot environment. Pregnancy per artificial insemination (P/AI; 64,666 services over an 8-year period) both in heifers (n = 22,313) and cows (n = 42,353) from a large dairy herd in northern Mexico (26°N) were evaluated with the GENMOD procedure of SAS, with respect to month of AI. Overall, P/AI with sex-sorted semen was greater (P < 0.01) in heifers (41.6 %) than cows (17.3 %). P/AI for cows serviced with conventional semen was 10 % points higher (P < 0.01) in January and December (31 vs. 21 %) than cows serviced with sex-sorted semen. While there was no difference in P/AI between the sex-sorted sperm and conventional semen in cows inseminated in July (16 and 18 %, respectively), P/AI plummeted for both groups of cows during the summer and fall (more severe heat stress). P/AI was not different between heifers serviced with sex-sorted or conventional semen during the hottest months of the year (July to October). However, during the coldest month of the year (January and February), P/AI was 10 percentage points greater (P < 0.01) in heifers serviced with conventional than sex-sorted semen. It was concluded that in this hot climate cow and heifer fertility declined in the summer and fall when inseminated with conventional semen. However, the use of sex-sorted semen during summer and fall did not compromise the breeding success in heifers. Thus, this data suggest that sex-sorted semen promotes some embryonic thermoprotective mechanism, which leads to a marginal summer and fall fertility depression with this type of semen in this particular hot environment.

Breeding of carnations (Dianthus caryophyllus L.) for long vase life

PubMed Central

Onozaki, Takashi

2018-01-01

Carnation (Dianthus caryophyllus L.) is one of the main floricultural crops in Japan and worldwide. The vase life of cut ornamental flowers, including carnations, is important in determining their quality and consumers’ preference. To improve the vase life of carnation flowers, my group started a breeding research program in 1992 using conventional cross-breeding techniques. We repeatedly crossed and selected promising offspring with long vase life for seven generations, from 1992 to 2008. In 2005, we developed two cultivars, ‘Miracle Rouge’ and ‘Miracle Symphony’, with genetically determined long vase lives of 17.7 to 20.7 days (3.2 to 3.6 times that of ‘White Sim’) under standard conditions (23°C, 70% RH, 12-h photoperiod). Line 532-6 showed an ultra-long vase life averaging 27.8 to 32.7 days (4.6 to 5.4 times that of ‘White Sim’). We evaluated changes in ethylene sensitivity with flower senescence simply and accurately using a time-lapse video recorder. In 2010, we selected line 806-46b with both ultra-long vase life (27.1 days, 4.4 times that of ‘White Sim’) and ethylene resistance. Analyses using six cultivars and 123 selected lines from the 1st to the 7th generations revealed that the long vase life was strongly associated with a decrease in ethylene production. PMID:29681743

Organic and conventional farmers differ in their perspective on cover crop use and breeding

USDA-ARS?s Scientific Manuscript database

Cover crops play an important role in agricultural sustainability. Unlike commodity cash crops, however, there has been relatively little cover crop germplasm research and development. We conducted an online survey to evaluate a) the perspectives of organic and conventional farmers in the United Sta...

Three criteria for establishing the usefulness of biotechnology for reducing micronutrient malnutrition.

PubMed

Bouis, Howarth E

2002-12-01

The fundamental reason that plant breeding using either conventional breeding or biotechnology is so cost-effective is that the benefits of a one-time investment at a central research location can be multiplied over time across nations all over the world. Supplementation and fortification incur the same recurrent costs year after year in country after country. However, each intervention has its own comparative advantages, such that a combination of several interventions is required to substantially reduce micronutrient malnutrition. Improving the density of trace minerals in plants also reduces input requirements and raises crop yields. A simulation model for India and Bangladesh demonstrated that $42 million invested in conventional breeding in developing and planting iron- and zinc-dense varieties of rice and wheat on only 10% of the acreage used for these crops would return $4.9 billion in improved nutrition (including a total of 44 million prevented cases of anemia over 10 years) and higher agricultural productivity.

Phenotyping of Eggplant Wild Relatives and Interspecific Hybrids with Conventional and Phenomics Descriptors Provides Insight for Their Potential Utilization in Breeding

PubMed Central

Kaushik, Prashant; Prohens, Jaime; Vilanova, Santiago; Gramazio, Pietro; Plazas, Mariola

2016-01-01

Eggplant (Solanum melongena) is related to a large number of wild species that are a source of variation for breeding programmes, in particular for traits related to adaptation to climate change. However, wild species remain largely unexploited for eggplant breeding. Detailed phenotypic characterization of wild species and their hybrids with eggplant may allow identifying promising wild species and information on the genetic control and heterosis of relevant traits. We characterizated six eggplant accessions, 21 accessions of 12 wild species (the only primary genepool species S. insanum and 11 secondary genepool species) and 45 interspecific hybrids of eggplant with wild species (18 with S. insanum and 27 with secondary genepool species) using 27 conventional morphological descriptors and 20 fruit morphometric descriptors obtained with the phenomics tool Tomato Analyzer. Significant differences were observed among cultivated, wild and interspecific hybrid groups for 18 conventional and 18 Tomato Analyzer descriptors, with hybrids generally having intermediate values. Wild species were generally more variable than cultivated accessions and interspecific hybrids displayed intermediate ranges of variation and coefficient of variation (CV) values, except for fruit shape traits in which the latter were the most variable. The multivariate principal components analysis (PCA) reveals a clear separation of wild species and cultivated accessions. Interspecific hybrids with S. insanum plotted closer to cultivated eggplant, while hybrids with secondary genepool species generally clustered together with wild species. Many differences were observed among wild species for traits of agronomic interest, which allowed identifying species of greatest potential interest for eggplant breeding. Heterosis values were positive for most vigor-related traits, while for fruit size values were close to zero for hybrids with S. incanum and highly negative for hybrids with secondary genepool species. Our results allowed the identification of potentially interesting wild species and interspecific hybrids for introgression breeding in eggplant. This is an important step for broadening the genetic base of eggplant and for breeding for adaptation to climate change in this crop. PMID:27242876

Comparative safety assessment of plant-derived foods.

PubMed

Kok, E J; Keijer, J; Kleter, G A; Kuiper, H A

2008-02-01

The second generation of genetically modified (GM) plants that are moving towards the market are characterized by modifications that may be more complex and traits that more often are to the benefit of the consumer. These developments will have implications for the safety assessment of the resulting plant products. In part of the cases the same crop plant can, however, also be obtained by 'conventional' breeding strategies. The breeder will decide on a case-by-case basis what will be the best strategy to reach the set target and whether genetic modification will form part of this strategy. This article discusses important aspects of the safety assessment of complex products derived from newly bred plant varieties obtained by different breeding strategies. On the basis of this overview, we conclude that the current process of the safety evaluation of GM versus conventionally bred plants is not well balanced. GM varieties are elaborately assessed, yet at the same time other crop plants resulting from conventional breeding strategies may warrant further food safety assessment for the benefit of the consumer. We propose to develop a general screening frame for all newly developed plant varieties to select varieties that cannot, on the basis of scientific criteria, be considered as safe as plant varieties that are already on the market.

Breeding for resistance to downy mildews and stalk rots in maize.

PubMed

Lal, S; Singh, I S

1984-12-01

The present review includes information on distribution, symptoms, inoculation techniques, disease rating, sources of resistance, genetics of resistance, breeding approaches for resistance, and the present status of resistance breeding with respect to Sclerophthora and Peronosclerospora downy mildews and Erwinia, Cephalosporium and Fusarium stalk rots. Some suggestions highlighting research gaps pertinent to future breeding strategies are mentioned.

Joint proceedings, Second Genetics Workshop of the Society of American Foresters and Seventh Lake States Forest Tree Improvement Conference, October 21-23, 1965.

Treesearch

NCFES

1966-01-01

Included are (1) 22 technical papers (by researchers from many sections of the United States and Canada) pertaining to selection and progeny testing, radiation genetics, intraspecific variation, natural and artificial hybridization, breeding systems, breeding methodology and specialized tree breeding techniques, and applied breeding and allied fields; (2) concise...

Molecular Breeding Strategy and Challenges Towards Improvement of Blast Disease Resistance in Rice Crop

PubMed Central

Ashkani, Sadegh; Rafii, Mohd Y.; Shabanimofrad, Mahmoodreza; Miah, Gous; Sahebi, Mahbod; Azizi, Parisa; Tanweer, Fatah A.; Akhtar, Mohd Sayeed; Nasehi, Abbas

2015-01-01

Rice is a staple and most important security food crop consumed by almost half of the world’s population. More rice production is needed due to the rapid population growth in the world. Rice blast caused by the fungus, Magnaporthe oryzae is one of the most destructive diseases of this crop in different part of the world. Breakdown of blast resistance is the major cause of yield instability in several rice growing areas. There is a need to develop strategies providing long-lasting disease resistance against a broad spectrum of pathogens, giving protection for a long time over a broad geographic area, promising for sustainable rice production in the future. So far, molecular breeding approaches involving DNA markers, such as QTL mapping, marker-aided selection, gene pyramiding, allele mining and genetic transformation have been used to develop new resistant rice cultivars. Such techniques now are used as a low-cost, high-throughput alternative to conventional methods allowing rapid introgression of disease resistance genes into susceptible varieties as well as the incorporation of multiple genes into individual lines for more durable blast resistance. The paper briefly reviewed the progress of studies on this aspect to provide the interest information for rice disease resistance breeding. This review includes examples of how advanced molecular method have been used in breeding programs for improving blast resistance. New information and knowledge gained from previous research on the recent strategy and challenges towards improvement of blast disease such as pyramiding disease resistance gene for creating new rice varieties with high resistance against multiple diseases will undoubtedly provide new insights into the rice disease control. PMID:26635817

New Breed of Mice May Improve Accuracy for Preclinical Testing of Cancer Drugs | Poster

Cancer.gov

A new breed of lab animals, dubbed “glowing head mice,” may do a better job than conventional mice in predicting the success of experimental cancer drugs—while also helping to meet an urgent need for more realistic preclinical animal models. The mice were developed to tolerate often-used light-emitting molecules, such as luciferase from fireflies and green fluorescent protein

Advances in Maize Genomics and Their Value for Enhancing Genetic Gains from Breeding

PubMed Central

Xu, Yunbi; Skinner, Debra J.; Wu, Huixia; Palacios-Rojas, Natalia; Araus, Jose Luis; Yan, Jianbing; Gao, Shibin; Warburton, Marilyn L.; Crouch, Jonathan H.

2009-01-01

Maize is an important crop for food, feed, forage, and fuel across tropical and temperate areas of the world. Diversity studies at genetic, molecular, and functional levels have revealed that, tropical maize germplasm, landraces, and wild relatives harbor a significantly wider range of genetic variation. Among all types of markers, SNP markers are increasingly the marker-of-choice for all genomics applications in maize breeding. Genetic mapping has been developed through conventional linkage mapping and more recently through linkage disequilibrium-based association analyses. Maize genome sequencing, initially focused on gene-rich regions, now aims for the availability of complete genome sequence. Conventional insertion mutation-based cloning has been complemented recently by EST- and map-based cloning. Transgenics and nutritional genomics are rapidly advancing fields targeting important agronomic traits including pest resistance and grain quality. Substantial advances have been made in methodologies for genomics-assisted breeding, enhancing progress in yield as well as abiotic and biotic stress resistances. Various genomic databases and informatics tools have been developed, among which MaizeGDB is the most developed and widely used by the maize research community. In the future, more emphasis should be given to the development of tools and strategic germplasm resources for more effective molecular breeding of tropical maize products. PMID:19688107

Composition of grain and forage from insect-protected and herbicide-tolerant corn, MON 89034 × TC1507 × MON 88017 × DAS-59122-7 (SmartStax), is equivalent to that of conventional corn (Zea mays L.).

PubMed

Lundry, Denise R; Burns, J Austin; Nemeth, Margaret A; Riordan, Susan G

2013-02-27

Monsanto Company and Dow AgroSciences LLC have developed the combined-trait corn product MON 89034 × TC1507 × MON 88017 × DAS-59122-7 (SmartStax, a registered trademark of Monsanto Technology LLC). The combination of four biotechnology-derived events into a single corn product (stacking) through conventional breeding provides broad protection against lepidopteran and corn rootworm insect pests as well as tolerance to the glyphosate and glufosinate-ammonium herbicide families. The purpose of the work described here was to assess whether the nutrient, antinutrient, and secondary metabolite levels in grain and forage tissues of the combined-trait product are comparable to those in conventional corn. Compositional analyses were conducted on grain and forage from SmartStax, a near-isogenic conventional corn hybrid (XE6001), and 14 conventional reference hybrids, grown at multiple locations across the United States. No statistically significant differences between SmartStax and conventional corn were observed for the 8 components analyzed in forage and for 46 of the 52 components analyzed in grain. The six significant differences observed in grain components (p < 0.05) were assessed in context of the natural variability for that component. These results demonstrate that the stacked product, SmartStax, produced through conventional breeding of four single-event products containing eight proteins, is compositionally equivalent to conventional corn, as previously demonstrated for the single-event products.

Development of basic technologies for improvement of breeding and cultivation of Japanese gentian

PubMed Central

Nishihara, Masahiro; Tasaki, Keisuke; Sasaki, Nobuhiro; Takahashi, Hideyuki

2018-01-01

Japanese gentians are the most important ornamental flowers in Iwate Prefecture and their breeding and cultivation have been actively conducted for half a century. With its cool climate and large hilly and mountainous area, more than 60% of gentian production in Japan occurs in Iwate Prefecture. Recent advances in gentian breeding and cultivation have facilitated the efficient breeding of new cultivars; disease control and improved cultivation conditions have led to the stable production of Japanese gentians. Molecular biology techniques have been developed and applied in gentian breeding, including the diagnosis of viral diseases and analysis of physiological disorders to improve gentian production. This review summarizes such recent approaches that will assist in the development of new cultivars and support cultivation. More recently, new plant breeding techniques, including several new biotechnological methods such as genome editing and viral vectors, have also been developed in gentian. We, therefore, present examples of their application to gentians and discuss their advantages in future studies of gentians. PMID:29681744

Proteomics insight into the biological safety of transgenic modification of rice as compared with conventional genetic breeding and spontaneous genotypic variation.

PubMed

Gong, Chun Yan; Li, Qi; Yu, Hua Tao; Wang, Zizhang; Wang, Tai

2012-05-04

The potential of unintended effects caused by transgenic events is a key issue in the commercialization of genetically modified (GM) crops. To investigate whether transgenic events cause unintended effects, we used comparative proteomics approaches to evaluate proteome differences in seeds from 2 sets of GM indica rice, herbicide-resistant Bar68-1 carrying bar and insect-resistant 2036-1a carrying cry1Ac/sck, and their respective controls D68 and MH86, as well as indica variety MH63, a parental line for breeding MH86, and japonica variety ZH10. This experimental design allowed for comparing proteome difference caused by transgenes, conventional genetic breeding, and natural genetic variation. Proteomics analysis revealed the maximum numbers of differentially expressed proteins between indica and japonica cultivars, second among indica varieties with relative small difference between MH86 and MH63, and the minimum between GM rice and respective control, thus indicating GM events do not substantially alter proteome profiles as compared with conventional genetic breeding and natural genetic variation. Mass spectrometry analysis revealed 234 proteins differentially expressed in the 6 materials, and these proteins were involved in different cellular and metabolic processes with a prominent skew toward metabolism (31.2%), protein synthesis and destination (25.2%), and defense response (22.4%). In these seed proteomes, proteins implicated in the 3 prominent biological processes showed significantly different composite expression patterns and were major factors differentiating japonica and indica cultivars, as well as indica varieties. Thus, metabolism, protein synthesis and destination, and defense response in seeds are important in differentiating rice cultivars and varieties.

Optimizing charge breeding techniques for ISOL facilities in Europe: Conclusions from the EMILIE project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delahaye, P., E-mail: delahaye@ganil.fr; Jardin, P.; Maunoury, L.

The present paper summarizes the results obtained from the past few years in the framework of the Enhanced Multi-Ionization of short-Lived Isotopes for Eurisol (EMILIE) project. The EMILIE project aims at improving the charge breeding techniques with both Electron Cyclotron Resonance Ion Sources (ECRIS) and Electron Beam Ion Sources (EBISs) for European Radioactive Ion Beam (RIB) facilities. Within EMILIE, an original technique for debunching the beam from EBIS charge breeders is being developed, for making an optimal use of the capabilities of CW post-accelerators of the future facilities. Such a debunching technique should eventually resolve duty cycle and time structuremore » issues which presently complicate the data-acquisition of experiments. The results of the first tests of this technique are reported here. In comparison with charge breeding with an EBIS, the ECRIS technique had lower performance in efficiency and attainable charge state for metallic ion beams and also suffered from issues related to beam contamination. In recent years, improvements have been made which significantly reduce the differences between the two techniques, making ECRIS charge breeding more attractive especially for CW machines producing intense beams. Upgraded versions of the Phoenix charge breeder, originally developed by LPSC, will be used at SPES and GANIL/SPIRAL. These two charge breeders have benefited from studies undertaken within EMILIE, which are also briefly summarized here.« less

402nd Brookhaven Lecture. Genetically Modified Plants: What's the Fuss?

ScienceCinema

Burr, Ben

2017-12-22

Burr explains that the risks presented by conventional plant improvement and gene-transfer technology have been reviewed by the National Academy of Sciences, the U.S. Department of Agriculture, and the Food & Drug Administration. These groups have concluded that gene-transfer technology poses no risk or danger above that present in conventional plant breeding.

Energetic fitness: Field metabolic rates assessed via 3D accelerometry complement conventional fitness metrics

USGS Publications Warehouse

Grémillet, David; Lescroël, Amelie; Ballard, Grant; Dugger, Katie M.; Massaro, Melanie; Porzig, Elizabeth L.; Ainley, David G.

2018-01-01

Evaluating the fitness of organisms is an essential step towards understanding their responses to environmental change. Connections between energy expenditure and fitness have been postulated for nearly a century. However, testing this premise among wild animals is constrained by difficulties in measuring energy expenditure while simultaneously monitoring conventional fitness metrics such as survival and reproductive output.We addressed this issue by exploring the functional links between field metabolic rate (FMR), body condition, sex, age and reproductive performance in a wild population.We deployed 3D accelerometers on 115 Adélie penguins Pygoscelis adeliae during four breeding seasons at one of the largest colonies of this species, Cape Crozier, on Ross Island, Antarctica. The demography of this population has been studied for the past 18 years. From accelerometry recordings, collected for birds of known age and breeding history, we determined the vector of the dynamic body acceleration (VeDBA) and used it as a proxy for FMR.This allowed us to demonstrate relationships among FMR, a breeding quality index (BQI) and body condition. Notably, we found a significant quadratic relationship between mean VeDBA during foraging and BQI for experienced breeders, and individuals in better body condition showed lower rates of energy expenditure.We conclude that using FMR as a fitness component complementary to more conventional fitness metrics will yield greater understanding of evolutionary and conservation physiology.

A comparison of the nesting success of mourning doves and American robins in conventionally managed and organic orchards

USGS Publications Warehouse

Fluetsch, K.M.

1992-01-01

A comparative study was undertaken to document more closely the effects of operational pesticide use on non-target avian species. Mourning Dove (Zenaida macroura) and American Robin (Turdus migratorius) nesting activity was monitored in three organic and three conventional orchards during two breeding seasons. Surveys were conducted to characterize the avian community within orchards under both management practices. Organophosphorus (OP) and carbamate pesticides, known to be extremely toxic to birds, were repeatedly sprayed during the peaks in dove and robin breeding activity. Spray card tests revealed that OP pesticides were deposited on 85.5% of the nests tested during routine spray operations. The threat of direct pesticide exposure to eggs, nestlings, and adult birds was considerable. Nest daily survival rates (DSRs) for both doves and robins, were significantly higher in the organic orchards than in the conventional orchards in 1991 and years combined (P < 0.05). Species diversity was significantly greater in the organic orchards (H = 2.43) than in the conventional orchards (H = 1.79). Results suggest that repeated applications of pesticides, within the conventional orchards, directly or indirectly, affected the reproductive success of doves and robins, as well as influenced species diversity within the treated orchards. Organic orchards appear to provide more favorable nesting and foraging habitat for birds than conventional orchards.

Condensed tannins in some forage legumes: their role in the prevention of ruminant pasture bloat.

PubMed

Lees, G L

1992-01-01

For the past 20 years, the focus in our laboratory has been on finding the causes of ruminant pasture bloat and eventually breeding a bloat-safe alfalfa (Medicago sativa L.); i.e., with bloat potential reduced to the economic threshold. In the mid-seventies, the mechanisms of bloat were explored and found to be more physical than chemical. Characteristic of all bloating legumes after ingestion was a very rapid initial rate of ingestion by rumen microbes. Through the study of bloating and non-bloating legumes, factors were elucidated in the plant that would slow this process. One of these factors was the presence of condensed tannins in the herbage. Some of the non-bloating legumes contained these secondary metabolites, but no condensed tannins were found in any of the bloating legumes. Therefore, species containing an appreciable amount of condensed tannins in their leaves and stems are considered to be non-bloating. Conventional breeding methods have not been successful in producing an alfalfa with condensed tannins in its herbage. New approaches using tissue culture techniques are being attempted, but genetic engineering has the greatest potential for success.

Mechanism of Resistance in Mungbean [Vigna radiata (L.) R. Wilczek var. radiata] to bruchids, Callosobruchus spp. (Coleoptera: Bruchidae).

PubMed

War, Abdul R; Murugesan, Surya; Boddepalli, Venkata N; Srinivasan, Ramasamy; Nair, Ramakrishnan M

2017-01-01

Mungbean [ Vigna radiata (L.) R. Wilczek var. radiata ] is an important pulse crop in Asia, and is consumed as dry seeds and as bean sprouts. It is an excellent source of digestible protein. Bruchids [ Callosobruchus chinensis (L.) and Callosobruchus maculatus (F.)] are the important pests of mungbean and cause damage in the field and in storage. Bruchid infestation reduces the nutritional and market value of the grain and renders seeds unfit for human consumption, agricultural and commercial uses. These pests are controlled mainly by fumigation with highly toxic chemicals such as carbon disulfide, phosphene, and methyl bromide, or by dusting with several other insecticides, which leave residues on the grain, thus, threatening food safety. Some plant-based extracts have been found useful in controlling bruchids, but are not fully successful due to their short-term activity, rapid degradability, and potentially negative effect on seed germination. Although some wild sources of bruchid resistance in mungbean have been reported, which have been used to develop bruchid- resistant lines, undesirable genetic linkages threaten the proper exploitation of genetic diversity from wild germplasm into commercial cultivars. Further, biotype variation in bruchids has rendered some mungbean lines susceptible that otherwise would have been resistant to the pest. Host plant resistance is a cost-effective and a safe alternative to control bruchids in mungbean and is associated with morphological, biochemical, and molecular traits. These traits affect insect growth and development, thereby, reduce the yield losses by the pests. Understanding the defense mechanisms against insect pests could be utilized in exploiting these traits in crop breeding. This review discusses different traits in mungbean involved in defense against bruchids and their utility in pest management. We also highlight the breeding constraints for developing bruchid-resistant mungbean and how can these constraints be minimized. We further highlight the importance of supporting conventional breeding techniques by molecular techniques such as molecular markers linked to bruchid resistance.

Mechanism of Resistance in Mungbean [Vigna radiata (L.) R. Wilczek var. radiata] to bruchids, Callosobruchus spp. (Coleoptera: Bruchidae)

PubMed Central

War, Abdul R.; Murugesan, Surya; Boddepalli, Venkata N.; Srinivasan, Ramasamy; Nair, Ramakrishnan M.

2017-01-01

Mungbean [Vigna radiata (L.) R. Wilczek var. radiata] is an important pulse crop in Asia, and is consumed as dry seeds and as bean sprouts. It is an excellent source of digestible protein. Bruchids [Callosobruchus chinensis (L.) and Callosobruchus maculatus (F.)] are the important pests of mungbean and cause damage in the field and in storage. Bruchid infestation reduces the nutritional and market value of the grain and renders seeds unfit for human consumption, agricultural and commercial uses. These pests are controlled mainly by fumigation with highly toxic chemicals such as carbon disulfide, phosphene, and methyl bromide, or by dusting with several other insecticides, which leave residues on the grain, thus, threatening food safety. Some plant-based extracts have been found useful in controlling bruchids, but are not fully successful due to their short-term activity, rapid degradability, and potentially negative effect on seed germination. Although some wild sources of bruchid resistance in mungbean have been reported, which have been used to develop bruchid- resistant lines, undesirable genetic linkages threaten the proper exploitation of genetic diversity from wild germplasm into commercial cultivars. Further, biotype variation in bruchids has rendered some mungbean lines susceptible that otherwise would have been resistant to the pest. Host plant resistance is a cost-effective and a safe alternative to control bruchids in mungbean and is associated with morphological, biochemical, and molecular traits. These traits affect insect growth and development, thereby, reduce the yield losses by the pests. Understanding the defense mechanisms against insect pests could be utilized in exploiting these traits in crop breeding. This review discusses different traits in mungbean involved in defense against bruchids and their utility in pest management. We also highlight the breeding constraints for developing bruchid-resistant mungbean and how can these constraints be minimized. We further highlight the importance of supporting conventional breeding techniques by molecular techniques such as molecular markers linked to bruchid resistance. PMID:28676807

Effects of restoration techniques on breeding birds in a thermally-impacted bottomland hardwood forest

Treesearch

J. Matthew Buffington; John C. Kilgo; Robert A. Sargent; Karl V. Miller; Brian R. Chapman

2000-01-01

We evaluated the effects of revegetation techniques on breeding bird communities in a bottomland hardwood forest impacted by thermal effluent. In 1993, sections of the Pen Branch bottomland on the Savannah River Site, South Carolina, were herbicide-treated (glyphosate), burned, and planted; other sections were planted only while others were unaltered and served as...

Proteomic evaluation of genetically modified crops: current status and challenges

PubMed Central

Gong, Chun Yan; Wang, Tai

2013-01-01

Hectares of genetically modified (GM) crops have increased exponentially since 1996, when such crops began to be commercialized. GM biotechnology, together with conventional breeding, has become the main approach to improving agronomic traits of crops. However, people are concerned about the safety of GM crops, especially GM-derived food and feed. Many efforts have been made to evaluate the unintended effects caused by the introduction of exogenous genes. “Omics” techniques have advantages over targeted analysis in evaluating such crops because of their use of high-throughput screening. Proteins are key players in gene function and are directly involved in metabolism and cellular development or have roles as toxins, antinutrients, or allergens, which are essential for human health. Thus, proteomics can be expected to become one of the most useful tools in safety assessment. This review assesses the potential of proteomics in evaluating various GM crops. We further describe the challenges in ensuring homogeneity and sensitivity in detection techniques. PMID:23471542

Proteomic evaluation of genetically modified crops: current status and challenges.

PubMed

Gong, Chun Yan; Wang, Tai

2013-01-01

Hectares of genetically modified (GM) crops have increased exponentially since 1996, when such crops began to be commercialized. GM biotechnology, together with conventional breeding, has become the main approach to improving agronomic traits of crops. However, people are concerned about the safety of GM crops, especially GM-derived food and feed. Many efforts have been made to evaluate the unintended effects caused by the introduction of exogenous genes. "Omics" techniques have advantages over targeted analysis in evaluating such crops because of their use of high-throughput screening. Proteins are key players in gene function and are directly involved in metabolism and cellular development or have roles as toxins, antinutrients, or allergens, which are essential for human health. Thus, proteomics can be expected to become one of the most useful tools in safety assessment. This review assesses the potential of proteomics in evaluating various GM crops. We further describe the challenges in ensuring homogeneity and sensitivity in detection techniques.

Recent advances of microbial breeding via heavy-ion mutagenesis at IMP.

PubMed

Hu, W; Li, W; Chen, J

2017-10-01

Nowadays, the value of heavy-ion mutagenesis has been accepted as a novel powerful mutagen technique to generate new microbial mutants due to its high linear energy transfer and high relative biological effectiveness. This paper briefly reviews recent progress in developing a more efficient mutagenesis technique for microbial breeding using heavy-ion mutagenesis, and also presents the outline of the beam line for microbial breeding in Heavy Ion Research Facility of Lanzhou. Then, new insights into microbial biotechnology via heavy-ion mutagenesis are also further explored. We hope that our concerns will give deep insight into microbial breeding biotechnology via heavy-ion mutagenesis. We also believe that heavy-ion mutagenesis breeding will greatly contribute to the progress of a comprehensive study industrial strain engineering for bioindustry in the future. There is currently a great interest in developing rapid and diverse microbial mutation tool for strain modification. Heavy-ion mutagenesis has been proved as a powerful technology for microbial breeding due to its broad spectrum of mutation phenotypes with high efficiency. In order to deeply understand heavy-ion mutagenesis technology, this paper briefly reviews recent progress in microbial breeding using heavy-ion mutagenesis at IMP, and also presents the outline of the beam line for microbial breeding in Heavy Ion Research Facility of Lanzhou (HIRFL) as well as new insights into microbial biotechnology via heavy-ion mutagenesis. Thus, this work can provide the guidelines to promote the development of novel microbial biotechnology cross-linking heavy-ion mutagenesis breeding that could make breeding process more efficiently in the future. © 2017 The Society for Applied Microbiology.

Laboratory breeding and testing of Australorbis glabratus for molluscicidal screening

PubMed Central

Hopf, H. S.; Muller, R. L.

1962-01-01

The authors describe a technique for laboratory breeding of Australorbis glabratus, the intermediate host of Schistosoma mansoni in South America. This technique is suitable for obtaining large numbers of snails in a small space with the minimum of maintenance time and under carefully controlled conditions. Techniques are also outlined for testing molluscicides against eggs and young snails as well as against adults. It is considered that, in view of the saving in breeding time and space effected, testing against young snails has several advantages for primary screening. With no compounds tested have anomalous results been obtained. Finally, the authors report on the results obtained with a new class of molluscicidal compounds—the organo-tins—which cause snail mortality in concentrations as low as those of any of the other molluscicides tested. PMID:13961665

Using L-M BP Algorithm Forecase the 305 Days Production of First-Breed Dairy

NASA Astrophysics Data System (ADS)

Wei, Xiaoli; Qi, Guoqiang; Shen, Weizheng; Jian, Sun

Aiming at the shortage of conventional BP algorithm, a BP neural net works improved by L-M algorithm is put forward. On the basis of the network, a Prediction model for 305 day's milk productions was set up. Traditional methods finish these data must spend at least 305 days, But this model can forecast first-breed dairy's 305 days milk production ahead of 215 days. The validity of the improved BP neural network predictive model was validated through the experiments.

Treatment and control of Trixacarus caviae infestation in a conventional guinea pig (Cavia porcellus) breeding colony.

PubMed

Nath, Anjan Jyoti

2016-12-01

A case of sarcoptic mange caused by Trixacarus caviae in a conventional guinea pig breeding colony is reported. The infestation was reported in a large colony of guinea pigs during the month of July, 2013 affecting 30 breeder guinea pigs. Severely infested animals were treated individually with subcutaneous injection of ivermectin 1 % w/v (Neomec ® ) at the rate of 400 µg/kg body weight 10 days apart. Three doses of ivermectin were sufficient to eliminate the parasite which tested negative after 30 days of the first treatment. The entire colony was given preventive dose of ivermectin spray (2 mg/ml solution) following the same schedule. Strict hygienic measures were followed. New hair growth in the severely affected animals was evidenced on 30th day of treatment.

Reverse breeding: a novel breeding approach based on engineered meiosis.

PubMed

Dirks, Rob; van Dun, Kees; de Snoo, C Bastiaan; van den Berg, Mark; Lelivelt, Cilia L C; Voermans, William; Woudenberg, Leo; de Wit, Jack P C; Reinink, Kees; Schut, Johan W; van der Zeeuw, Eveline; Vogelaar, Aat; Freymark, Gerald; Gutteling, Evert W; Keppel, Marina N; van Drongelen, Paul; Kieny, Matthieu; Ellul, Philippe; Touraev, Alisher; Ma, Hong; de Jong, Hans; Wijnker, Erik

2009-12-01

Reverse breeding (RB) is a novel plant breeding technique designed to directly produce parental lines for any heterozygous plant, one of the most sought after goals in plant breeding. RB generates perfectly complementing homozygous parental lines through engineered meiosis. The method is based on reducing genetic recombination in the selected heterozygote by eliminating meiotic crossing over. Male or female spores obtained from such plants contain combinations of non-recombinant parental chromosomes which can be cultured in vitro to generate homozygous doubled haploid plants (DHs). From these DHs, complementary parents can be selected and used to reconstitute the heterozygote in perpetuity. Since the fixation of unknown heterozygous genotypes is impossible in traditional plant breeding, RB could fundamentally change future plant breeding. In this review, we discuss various other applications of RB, including breeding per chromosome.

Reverse breeding: a novel breeding approach based on engineered meiosis

PubMed Central

Dirks, Rob; van Dun, Kees; de Snoo, C Bastiaan; van den Berg, Mark; Lelivelt, Cilia L C; Voermans, William; Woudenberg, Leo; de Wit, Jack P C; Reinink, Kees; Schut, Johan W; van der Zeeuw, Eveline; Vogelaar, Aat; Freymark, Gerald; Gutteling, Evert W; Keppel, Marina N; van Drongelen, Paul; Kieny, Matthieu; Ellul, Philippe; Touraev, Alisher; Ma, Hong; de Jong, Hans; Wijnker, Erik

2009-01-01

Reverse breeding (RB) is a novel plant breeding technique designed to directly produce parental lines for any heterozygous plant, one of the most sought after goals in plant breeding. RB generates perfectly complementing homozygous parental lines through engineered meiosis. The method is based on reducing genetic recombination in the selected heterozygote by eliminating meiotic crossing over. Male or female spores obtained from such plants contain combinations of non-recombinant parental chromosomes which can be cultured in vitro to generate homozygous doubled haploid plants (DHs). From these DHs, complementary parents can be selected and used to reconstitute the heterozygote in perpetuity. Since the fixation of unknown heterozygous genotypes is impossible in traditional plant breeding, RB could fundamentally change future plant breeding. In this review, we discuss various other applications of RB, including breeding per chromosome. PMID:19811618

X-ray investigation of cross-breed silk in cocoon, yarn and fabric forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radhalakshmi, Y. C.; Kariappa,; Siddaraju, G. N.

2012-06-05

Recently Central Sericulture Research and Training Institute, Mysore developed many improved cross breeds and bivoltine hybrids. Newly developed cross breeds recorded fibre characteristics which are significantly superior over existing control hybrids. This aspect has been investigated using X-ray diffraction technique. We have employed line profile analysis to compute microstructural parameters. These parameters are compared with physical parameters of newly developed cross breed silk fibers for a better understanding of structure-property relation in these samples.

Ovum pick up, intracytoplasmic sperm injection and somatic cell nuclear transfer in cattle, buffalo and horses: from the research laboratory to clinical practice.

PubMed

Galli, Cesare; Duchi, Roberto; Colleoni, Silvia; Lagutina, Irina; Lazzari, Giovanna

2014-01-01

Assisted reproductive techniques developed for cattle in the last 25 years, like ovum pick up (OPU), intracytoplasmic sperm injection (ICSI), and somatic cell nuclear transfer, have been transferred and adapted to buffalo and horses. The successful clinical applications of these techniques require both the clinical skills specific to each animal species and an experienced laboratory team to support the in vitro phase of the work. In cattle, OPU can be considered a consolidated technology that is rapidly outpacing conventional superovulation for embryo transfer. In buffalo, OPU represents the only possibility for embryo production to advance the implementation of embryo-based biotechnologies in that industry, although it is still mainly in the developmental phase. In the horse, OPU is now an established procedure for breeding from infertile and sporting mares throughout the year. It requires ICSI that in the horse, contrary to what happens in cattle and buffalo, is very efficient and the only option because conventional IVF does not work. Somatic cell nuclear transfer is destined to fill a very small niche for generating animals of extremely high commercial value. The efficiency is low, but because normal animals can be generated it is likely that advancing our knowledge in that field might improve the technology and reduce its cost. Copyright © 2014 Elsevier Inc. All rights reserved.

Differences in Voluntary Cow Traffic between Holstein and Illawarra Breeds of Dairy Cattle in a Pasture-based Automatic Milking System

PubMed Central

Clark, C. E. F.; Kwinten, N. B. P.; van Gastel, D. A. J. M.; Kerrisk, K. L.; Lyons, N. A.; Garcia, S. C.

2014-01-01

Automatic milking systems (AMS) rely upon voluntary cow traffic (the voluntary movement of cattle around a farm) for milk harvesting and feed consumption. Previous research on conventional milking systems has shown differences between dairy cow breeds for intake and milk production, however, the ability to manipulate voluntary cow traffic and milking frequency on AMS farms through breed selection is unknown. This study investigated the effect of breed (Holstein Friesian versus Illawarra) on voluntary cow traffic as determined by gate passes at the Camden AMS research farm dairy facility. Daily data on days in milk, milk yield, gate passes and milking frequency for 158 Holstein Friesian cows and 24 Illawarra cows were collated by month for the 2007 and 2008 years. Illawarra cows had 9% more gate passes/day than Holstein cows over the duration of the study; however, the milking frequency and milk yield of both breeds were similar. Gate passes were greatest for both breeds in early lactation and in the winter (June to August) and summer (December to February) seasons. These findings highlight an opportunity to translate increased voluntary cow movement associated with breed selection into increased milking frequencies, milk production and overall pasture-based AMS performance. PMID:25049992

Differences in Voluntary Cow Traffic between Holstein and Illawarra Breeds of Dairy Cattle in a Pasture-based Automatic Milking System.

PubMed

Clark, C E F; Kwinten, N B P; van Gastel, D A J M; Kerrisk, K L; Lyons, N A; Garcia, S C

2014-04-01

Automatic milking systems (AMS) rely upon voluntary cow traffic (the voluntary movement of cattle around a farm) for milk harvesting and feed consumption. Previous research on conventional milking systems has shown differences between dairy cow breeds for intake and milk production, however, the ability to manipulate voluntary cow traffic and milking frequency on AMS farms through breed selection is unknown. This study investigated the effect of breed (Holstein Friesian versus Illawarra) on voluntary cow traffic as determined by gate passes at the Camden AMS research farm dairy facility. Daily data on days in milk, milk yield, gate passes and milking frequency for 158 Holstein Friesian cows and 24 Illawarra cows were collated by month for the 2007 and 2008 years. Illawarra cows had 9% more gate passes/day than Holstein cows over the duration of the study; however, the milking frequency and milk yield of both breeds were similar. Gate passes were greatest for both breeds in early lactation and in the winter (June to August) and summer (December to February) seasons. These findings highlight an opportunity to translate increased voluntary cow movement associated with breed selection into increased milking frequencies, milk production and overall pasture-based AMS performance.

Role of biotechnological interventions in the improvement of castor (Ricinus communis L.) and Jatropha curcas L.

PubMed

Sujatha, M; Reddy, T P; Mahasi, M J

2008-01-01

Castor and Jatropha belong to the Euphorbiaceae family. This review highlights the role of biotechnological tools in the genetic improvement of castor and jatropha. Castor is monotypic and breeding programmes have mostly relied on the variability available in the primary gene pool. The major constraints limiting profitable cultivation are: vulnerability to insect pests and diseases, and the press cake is toxic which restrict its use as cattle feed. Conventional breeding techniques have limited scope in improvement of resistance to biotic stresses and in quality improvement owing to low genetic variability for these traits. Genetic diversity was assessed using protein based markers while use of molecular markers is at infancy. In vitro studies in castor have been successful in shoot proliferation from meristematic explants, but not callus-mediated regeneration. Genetic transformation experiments have been initiated for development of insect resistant and ricin-free transgenics with very low transformation frequency. In tropical and subtropical countries jatropha is viewed as a potential biofuel crop. The limitations in available germplasm include; lack of knowledge of the genetic base, poor yields, low genetic diversity and vulnerability to a wide array of insects and diseases. Great scope exists for genetic improvement through conventional methods, induced mutations, interspecific hybridization and genetic transformation. Reliable and highly efficient tissue culture protocols for direct and callus-mediated shoot regeneration and somatic embryogenesis are established for jatropha which indicates potential for widening the genetic base through biotechnological tools. Assessment of genetic diversity using molecular markers disclosed low interaccessional variability in local Jatropha curcas germplasm. The current status and future prospects of in vitro regeneration, genetic transformation and the role of molecular tools in the genetic enhancement of the two-oilseed crops are discussed.

DNA-informed breeding of rosaceous crops: promises, progress and prospects

PubMed Central

Peace, Cameron P

2017-01-01

Crops of the Rosaceae family provide valuable contributions to rural economies and human health and enjoyment. Sustained solutions to production challenges and market demands can be met with genetically improved new cultivars. Traditional rosaceous crop breeding is expensive and time-consuming and would benefit from improvements in efficiency and accuracy. Use of DNA information is becoming conventional in rosaceous crop breeding, contributing to many decisions and operations, but only after past decades of solved challenges and generation of sufficient resources. Successes in deployment of DNA-based knowledge and tools have arisen when the ‘chasm’ between genomics discoveries and practical application is bridged systematically. Key steps are establishing breeder desire for use of DNA information, adapting tools to local breeding utility, identifying efficient application schemes, accessing effective services in DNA-based diagnostics and gaining experience in integrating DNA information into breeding operations and decisions. DNA-informed germplasm characterization for revealing identity and relatedness has benefitted many programs and provides a compelling entry point to reaping benefits of genomics research. DNA-informed germplasm evaluation for predicting trait performance has enabled effective reallocation of breeding resources when applied in pioneering programs. DNA-based diagnostics is now expanding from specific loci to genome-wide considerations. Realizing the full potential of this expansion will require improved accuracy of predictions, multi-trait DNA profiling capabilities, streamlined breeding information management systems, strategies that overcome plant-based features that limit breeding progress and widespread training of current and future breeding personnel and allied scientists. PMID:28326185

Advocating a need for suitable breeding approaches to boost integrated pest management: a European perspective.

PubMed

Lamichhane, Jay Ram; Arseniuk, Edward; Boonekamp, Piet; Czembor, Jerzy; Decroocq, Veronique; Enjalbert, Jérome; Finckh, Maria R; Korbin, Małgorzata; Koppel, Mati; Kudsk, Per; Mesterhazy, Akos; Sosnowska, Danuta; Zimnoch-Guzowska, Ewa; Messéan, Antoine

2018-06-01

Currently, European farmers do not have access to sufficient numbers and diversity of crop species/varieties. This prevents them from designing cropping systems more resilient to abiotic and biotic stresses. Crop diversification is a key lever to reduce pest (pathogens, animal pests and weeds) pressures at all spatial levels from fields to landscapes. In this context, plant breeding should consist of: (1) increased efforts in the development of new or minor crop varieties to foster diversity in cropping systems, and (2) focus on more resilient varieties showing local adaptation. This new breeding paradigm, called here 'breeding for integrated pest management (IPM)', may boost IPM through the development of cultivars with tolerance or resistance to key pests, with the goal of reducing reliance on conventional pesticides. At the same time, this paradigm has legal and practical implications for future breeding programs, including those targeting sustainable agricultural systems. By putting these issues into the context, this article presents the key outcomes of a questionnaire survey and experts' views expressed during an EU workshop entitled 'Breeding for IPM in sustainable agricultural systems'. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Factors affecting the accuracy of genomic selection for growth and wood quality traits in an advanced-breeding population of black spruce (Picea mariana).

PubMed

Lenz, Patrick R N; Beaulieu, Jean; Mansfield, Shawn D; Clément, Sébastien; Desponts, Mireille; Bousquet, Jean

2017-04-28

Genomic selection (GS) uses information from genomic signatures consisting of thousands of genetic markers to predict complex traits. As such, GS represents a promising approach to accelerate tree breeding, which is especially relevant for the genetic improvement of boreal conifers characterized by long breeding cycles. In the present study, we tested GS in an advanced-breeding population of the boreal black spruce (Picea mariana [Mill.] BSP) for growth and wood quality traits, and concurrently examined factors affecting GS model accuracy. The study relied on 734 25-year-old trees belonging to 34 full-sib families derived from 27 parents and that were established on two contrasting sites. Genomic profiles were obtained from 4993 Single Nucleotide Polymorphisms (SNPs) representative of as many gene loci distributed among the 12 linkage groups common to spruce. GS models were obtained for four growth and wood traits. Validation using independent sets of trees showed that GS model accuracy was high, related to trait heritability and equivalent to that of conventional pedigree-based models. In forward selection, gains per unit of time were three times higher with the GS approach than with conventional selection. In addition, models were also accurate across sites, indicating little genotype-by-environment interaction in the area investigated. Using information from half-sibs instead of full-sibs led to a significant reduction in model accuracy, indicating that the inclusion of relatedness in the model contributed to its higher accuracies. About 500 to 1000 markers were sufficient to obtain GS model accuracy almost equivalent to that obtained with all markers, whether they were well spread across the genome or from a single linkage group, further confirming the implication of relatedness and potential long-range linkage disequilibrium (LD) in the high accuracy estimates obtained. Only slightly higher model accuracy was obtained when using marker subsets that were identified to carry large effects, indicating a minor role for short-range LD in this population. This study supports the integration of GS models in advanced-generation tree breeding programs, given that high genomic prediction accuracy was obtained with a relatively small number of markers due to high relatedness and family structure in the population. In boreal spruce breeding programs and similar ones with long breeding cycles, much larger gain per unit of time can be obtained from genomic selection at an early age than by the conventional approach. GS thus appears highly profitable, especially in the context of forward selection in species which are amenable to mass vegetative propagation of selected stock, such as spruces.

Organic dairy farmers put more emphasis on production traits than conventional farmers.

PubMed

Slagboom, M; Kargo, M; Edwards, D; Sørensen, A C; Thomasen, J R; Hjortø, L

2016-12-01

The overall aim of this research was to characterize the preferences of Danish dairy farmers for improvements in breeding goal traits. The specific aims were (1) to investigate the presence of heterogeneity in farmers' preferences by means of cluster analysis, and (2) to associate these clusters with herd characteristics and production systems (organic or conventional). We established a web-based survey to characterize the preferences of farmers for improvements in 10 traits, by means of pairwise rankings. We also collected a considerable number of herd characteristics. Overall, 106 organic farmers and 290 conventional farmers answered the survey, all with Holstein cows. The most preferred trait improvement was cow fertility, and the least preferred was calving difficulty. By means of cluster analysis, we identified 4 distinct clusters of farmers and named them according to the trait improvements that were most preferred: Health and Fertility, Production and Udder Health, Survival, and Fertility and Production. Some herd characteristics differed between clusters; for example, farmers in the Survival cluster had twice the percentage of dead cows in their herds compared with the other clusters, and farmers that gave the highest ranking to cow and heifer fertility had the lowest conception rate in their herds. This finding suggests that farmers prefer to improve traits that are more problematic in their herd. The proportion of organic and conventional farmers also differed between clusters; we found a higher proportion of organic farmers in the production-based clusters. When we analyzed organic and conventional data separately, we found that organic farmers ranked production traits higher than conventional farmers. The herds of organic farmers had lower milk yields and lower disease incidences, which might explain the high ranking of milk production and the low ranking of disease traits. This study shows that heterogeneity exists in farmers' preferences for improvements in breeding goal traits, that organic and conventional farmers differ in their preferences, and that herd characteristics can be linked to different farmer clusters. The results of this study could be used for the future development of breeding goals in Danish Holstein cows and for the development of customized total merit indices based on farmer preferences. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A major QTL corresponding to the Rk locus for resistance to root-knot nematodes in cowpea (Vigna unguiculata L. Walp.).

PubMed

Huynh, Bao-Lam; Matthews, William C; Ehlers, Jeffrey D; Lucas, Mitchell R; Santos, Jansen R P; Ndeve, Arsenio; Close, Timothy J; Roberts, Philip A

2016-01-01

Genome resolution of a major QTL associated with the Rk locus in cowpea for resistance to root-knot nematodes has significance for plant breeding programs and R gene characterization. Cowpea (Vigna unguiculata L. Walp.) is a susceptible host of root-knot nematodes (Meloidogyne spp.) (RKN), major plant-parasitic pests in global agriculture. To date, breeding for host resistance in cowpea has relied on phenotypic selection which requires time-consuming and expensive controlled infection assays. To facilitate marker-based selection, we aimed to identify and map quantitative trait loci (QTL) conferring the resistance trait. One recombinant inbred line (RIL) and two F2:3 populations, each derived from a cross between a susceptible and a resistant parent, were genotyped with genome-wide single nucleotide polymorphism (SNP) markers. The populations were screened in the field for root-galling symptoms and/or under growth-chamber conditions for nematode reproduction levels using M. incognita and M. javanica biotypes. One major QTL was mapped consistently on linkage group VuLG11 of each population. By genotyping additional cowpea lines and near-isogenic lines derived from conventional backcrossing, we confirmed that the detected QTL co-localized with the genome region associated with the Rk locus for RKN resistance that has been used in conventional breeding for many decades. This chromosomal location defined with flanking markers will be a valuable target in marker-assisted breeding and for positional cloning of genes controlling RKN resistance.

Optimization of Swine Breeding Programs Using Genomic Selection with ZPLAN+

PubMed Central

Lopez, B. M.; Kang, H. S.; Kim, T. H.; Viterbo, V. S.; Kim, H. S.; Na, C. S.; Seo, K. S.

2016-01-01

The objective of this study was to evaluate the present conventional selection program of a swine nucleus farm and compare it with a new selection strategy employing genomic enhanced breeding value (GEBV) as the selection criteria. The ZPLAN+ software was employed to calculate and compare the genetic gain, total cost, return and profit of each selection strategy. The first strategy reflected the current conventional breeding program, which was a progeny test system (CS). The second strategy was a selection scheme based strictly on genomic information (GS1). The third scenario was the same as GS1, but the selection by GEBV was further supplemented by the performance test (GS2). The last scenario was a mixture of genomic information and progeny tests (GS3). The results showed that the accuracy of the selection index of young boars of GS1 was 26% higher than that of CS. On the other hand, both GS2 and GS3 gave 31% higher accuracy than CS for young boars. The annual monetary genetic gain of GS1, GS2 and GS3 was 10%, 12%, and 11% higher, respectively, than that of CS. As expected, the discounted costs of genomic selection strategies were higher than those of CS. The costs of GS1, GS2 and GS3 were 35%, 73%, and 89% higher than those of CS, respectively, assuming a genotyping cost of $120. As a result, the discounted profit per animal of GS1 and GS2 was 8% and 2% higher, respectively, than that of CS while GS3 was 6% lower. Comparison among genomic breeding scenarios revealed that GS1 was more profitable than GS2 and GS3. The genomic selection schemes, especially GS1 and GS2, were clearly superior to the conventional scheme in terms of monetary genetic gain and profit. PMID:26954222

Application of selection index calculations to determine selection strategies in genomic breeding programs.

PubMed

König, S; Swalve, H H

2009-10-01

The availability of genomic estimated breeding values (GEBV) allows for possible modifications to existing dairy cattle breeding programs. Selection index calculations including genomic and phenotypic observations as index sources were used to determine the optimal number of offspring per genotyped sire with a focus on functional traits and the design of cooperator herds, and to evaluate the importance of a central station test for genotyped bull dams. Evaluation criteria to compare different breeding strategies were correlations between index and aggregate genotype (r(TI)), and the relative selection response percentage (RSR) of an index without single nucleotide polymorphism information in relation to a single nucleotide polymorphism-based index. The number of required daughter records per sire to achieve a predefined r(TI) strongly depends on the accuracy of GEBV (r(mg)) and the heritability of the trait. For a desired r(TI) of 0.8, h(2) = 0.10, and r(mg) = 0.5, at least 57 additional daughters have to be included in the genetic evaluation. Daughter records of genotyped sires are not necessary for optimal scenarios where r(mg) is greater than or equal to r(TI). There still is a substantial need for phenotypic daughter records, especially for low-heritability functional traits and r(mg) < 0.7. Phenotypic records from genotyped potential bull dams have no relevance for increasing r(TI), even with a low value for r(mg) of 0.5. Hence, genomic breeding programs should focus on recording functional traits within progeny groups, preferably in cooperator herds. For low-heritability traits and with r(mg) > 0.7, the RSR of conventional breeding programs was only 10% of RSR from genomic breeding strategies. As shown in scenarios including 2 traits in the index as well as in the aggregate genotype, the availability of highly accurate GEBV for production traits and low-accuracy GEBV for functional traits increased the risk of widening the gap between selection responses in production and functionality. Counteractions are possible, such as via higher economic weights for low-heritability functional traits. Finally, an alternative selection strategy considering only 2 pathways of selection for genotyped male calves and for cow dams was evaluated. This strategy is competitive with a 4-pathway genomic breeding program if the fraction of selected male calves for the artificial insemination program is below 1% and if selection is focused on functionality, thus pointing to substantial insufficiencies caused by low reliabilities of breeding values for cows for such traits in conventional bull dam selection schemes.

Biotechnology and apple breeding in Japan

PubMed Central

Igarashi, Megumi; Hatsuyama, Yoshimichi; Harada, Takeo; Fukasawa-Akada, Tomoko

2016-01-01

Apple is a fruit crop of significant economic importance, and breeders world wide continue to develop novel cultivars with improved characteristics. The lengthy juvenile period and the large field space required to grow apple populations have imposed major limitations on breeding. Various molecular biological techniques have been employed to make apple breeding easier. Transgenic technology has facilitated the development of apples with resistance to fungal or bacterial diseases, improved fruit quality, or root stocks with better rooting or dwarfing ability. DNA markers for disease resistance (scab, powdery mildew, fire-blight, Alternaria blotch) and fruit skin color have also been developed, and marker-assisted selection (MAS) has been employed in breeding programs. In the last decade, genomic sequences and chromosome maps of various cultivars have become available, allowing the development of large SNP arrays, enabling efficient QTL mapping and genomic selection (GS). In recent years, new technologies for genetic improvement, such as trans-grafting, virus vectors, and genome-editing, have emerged. Using these techniques, no foreign genes are present in the final product, and some of them show considerable promise for application to apple breeding. PMID:27069388

Biotechnology and apple breeding in Japan.

PubMed

Igarashi, Megumi; Hatsuyama, Yoshimichi; Harada, Takeo; Fukasawa-Akada, Tomoko

2016-01-01

Apple is a fruit crop of significant economic importance, and breeders world wide continue to develop novel cultivars with improved characteristics. The lengthy juvenile period and the large field space required to grow apple populations have imposed major limitations on breeding. Various molecular biological techniques have been employed to make apple breeding easier. Transgenic technology has facilitated the development of apples with resistance to fungal or bacterial diseases, improved fruit quality, or root stocks with better rooting or dwarfing ability. DNA markers for disease resistance (scab, powdery mildew, fire-blight, Alternaria blotch) and fruit skin color have also been developed, and marker-assisted selection (MAS) has been employed in breeding programs. In the last decade, genomic sequences and chromosome maps of various cultivars have become available, allowing the development of large SNP arrays, enabling efficient QTL mapping and genomic selection (GS). In recent years, new technologies for genetic improvement, such as trans-grafting, virus vectors, and genome-editing, have emerged. Using these techniques, no foreign genes are present in the final product, and some of them show considerable promise for application to apple breeding.

The importance of reproductive barriers and the effect of allopolyploidization on crop breeding

PubMed Central

Tonosaki, Kaoru; Osabe, Kenji; Kawanabe, Takahiro; Fujimoto, Ryo

2016-01-01

Inter-specific hybrids are a useful source for increasing genetic diversity. Some reproductive barriers before and/or after fertilization prevent production of hybrid plants by inter-specific crossing. Therefore, techniques to overcome the reproductive barrier have been developed, and have contributed to hybridization breeding. In recent studies, identification of molecules involved in plant reproduction has been studied to understand the mechanisms of reproductive barriers. Revealing the molecular mechanisms of reproductive barriers may allow us to overcome reproductive barriers in inter-specific crossing, and to efficiently produce inter-specific hybrids in cross-combinations that cannot be produced through artificial techniques. Inter-specific hybrid plants can potentially serve as an elite material for plant breeding, produced through the merging of genomes of parental species by allopolyploidization. Allopolyploidization provides some benefits, such as heterosis, increased genetic diversity and phenotypic variability, which are caused by dynamic changes of the genome and epigenome. Understanding of allopolyploidization mechanisms is important for practical utilization of inter-specific hybrids as a breeding material. This review discusses the importance of reproductive barriers and the effect of allopolyploidization in crop breeding programs. PMID:27436943

Dataset on the mean, standard deviation, broad-sense heritability and stability of wheat quality bred in three different ways and grown under organic and low-input conventional systems.

PubMed

Rakszegi, Marianna; Löschenberger, Franziska; Hiltbrunner, Jürg; Vida, Gyula; Mikó, Péter

2016-06-01

An assessment was previously made of the effects of organic and low-input field management systems on the physical, grain compositional and processing quality of wheat and on the performance of varieties developed using different breeding methods ("Comparison of quality parameters of wheat varieties with different breeding origin under organic and low-input conventional conditions" [1]). Here, accompanying data are provided on the performance and stability analysis of the genotypes using the coefficient of variation and the 'ranking' and 'which-won-where' plots of GGE biplot analysis for the most important quality traits. Broad-sense heritability was also evaluated and is given for the most important physical and quality properties of the seed in organic and low-input management systems, while mean values and standard deviation of the studied properties are presented separately for organic and low-input fields.

Potential impacts of iron biofortification in India.

PubMed

Stein, Alexander J; Meenakshi, J V; Qaim, Matin; Nestel, Penelope; Sachdev, H P S; Bhutta, Zulfiqar A

2008-04-01

Iron deficiency is a widespread nutrition and health problem in developing countries, causing impairments in physical activity and cognitive development, as well as maternal mortality. Although food fortification and supplementation programmes have been effective in some countries, their overall success remains limited. Biofortification, that is, breeding food crops for higher micronutrient content, is a relatively new approach, which has been gaining international attention recently. We propose a methodology for ex ante impact assessment of iron biofortification, building on a disability-adjusted life years (DALYs) framework. This methodology is applied in an Indian context. Using a large and representative data set of household food consumption, the likely effects of iron-rich rice and wheat varieties are simulated for different target groups and regions. These varieties, which are being developed by an international public research consortium, based on conventional breeding techniques, might be ready for local distribution within the next couple of years. The results indicate sizeable potential health benefits. Depending on the underlying assumptions, the disease burden associated with iron deficiency could be reduced by 19-58%. Due to the relatively low institutional cost to reach the target population, the expected cost-effectiveness of iron biofortification compares favourably with other micronutrient interventions. Nonetheless, biofortification should not be seen as a substitute for other interventions. Each approach has its particular strengths, so they complement one another.

Integration of genomic information into sport horse breeding programs for optimization of accuracy of selection.

PubMed

Haberland, A M; König von Borstel, U; Simianer, H; König, S

2012-09-01

Reliable selection criteria are required for young riding horses to increase genetic gain by increasing accuracy of selection and decreasing generation intervals. In this study, selection strategies incorporating genomic breeding values (GEBVs) were evaluated. Relevant stages of selection in sport horse breeding programs were analyzed by applying selection index theory. Results in terms of accuracies of indices (r(TI) ) and relative selection response indicated that information on single nucleotide polymorphism (SNP) genotypes considerably increases the accuracy of breeding values estimated for young horses without own or progeny performance. In a first scenario, the correlation between the breeding value estimated from the SNP genotype and the true breeding value (= accuracy of GEBV) was fixed to a relatively low value of r(mg) = 0.5. For a low heritability trait (h(2) = 0.15), and an index for a young horse based only on information from both parents, additional genomic information doubles r(TI) from 0.27 to 0.54. Including the conventional information source 'own performance' into the before mentioned index, additional SNP information increases r(TI) by 40%. Thus, particularly with regard to traits of low heritability, genomic information can provide a tool for well-founded selection decisions early in life. In a further approach, different sources of breeding values (e.g. GEBV and estimated breeding values (EBVs) from different countries) were combined into an overall index when altering accuracies of EBVs and correlations between traits. In summary, we showed that genomic selection strategies have the potential to contribute to a substantial reduction in generation intervals in horse breeding programs.

Community-based livestock breeding programmes: essentials and examples.

PubMed

Mueller, J P; Rischkowsky, B; Haile, A; Philipsson, J; Mwai, O; Besbes, B; Valle Zárate, A; Tibbo, M; Mirkena, T; Duguma, G; Sölkner, J; Wurzinger, M

2015-04-01

Breeding programmes described as community-based (CBBP) typically relate to low-input systems with farmers having a common interest to improve and share their genetic resources. CBBPs are more frequent with keepers of small ruminants, in particular smallholders of local breeds, than with cattle, pigs or chickens with which farmers may have easier access to alternative programmes. Constraints that limit the adoption of conventional breeding technologies in low-input systems cover a range of organizational and technical aspects. The analysis of 8 CBBPs located in countries of Latin-America, Africa and Asia highlights the importance of bottom-up approaches and involvement of local institutions in the planning and implementation stages. The analysis also reveals a high dependence of these programmes on organizational, technical and financial support. Completely self-sustained CBBPs seem to be difficult to realize. There is a need to implement and document formal socio-economic evaluations of CBBPs to provide governments and other development agencies with the information necessary for creating sustainable CBBPs at larger scales. © 2015 Blackwell Verlag GmbH.

Marker-assisted selection: an approach for precision plant breeding in the twenty-first century.

PubMed

Collard, Bertrand C Y; Mackill, David J

2008-02-12

DNA markers have enormous potential to improve the efficiency and precision of conventional plant breeding via marker-assisted selection (MAS). The large number of quantitative trait loci (QTLs) mapping studies for diverse crops species have provided an abundance of DNA marker-trait associations. In this review, we present an overview of the advantages of MAS and its most widely used applications in plant breeding, providing examples from cereal crops. We also consider reasons why MAS has had only a small impact on plant breeding so far and suggest ways in which the potential of MAS can be realized. Finally, we discuss reasons why the greater adoption of MAS in the future is inevitable, although the extent of its use will depend on available resources, especially for orphan crops, and may be delayed in less-developed countries. Achieving a substantial impact on crop improvement by MAS represents the great challenge for agricultural scientists in the next few decades.

The use of agrobiodiversity for plant improvement and the intellectual property paradigm: institutional fit and legal tools for mass selection, conventional and molecular plant breeding.

PubMed

Batur, Fulya; Dedeurwaerdere, Tom

2014-12-01

Focused on the impact of stringent intellectual property mechanisms over the uses of plant agricultural biodiversity in crop improvement, the article delves into a systematic analysis of the relationship between institutional paradigms and their technological contexts of application, identified as mass selection, controlled hybridisation, molecular breeding tools and transgenics. While the strong property paradigm has proven effective in the context of major leaps forward in genetic engineering, it faces a systematic breakdown when extended to mass selection, where innovation often displays a collective nature. However, it also creates partial blockages in those innovation schemes rested between on-farm observation and genetic modification, i.e. conventional plant breeding and upstream molecular biology research tools. Neither overly strong intellectual property rights, nor the absence of well delineated protection have proven an optimal fit for these two intermediary socio-technological systems of cumulative incremental innovation. To address these challenges, the authors look at appropriate institutional alternatives which can create effective incentives for in situ agrobiodiversity conservation and the equitable distribution of technologies in plant improvement, using the flexibilities of the TRIPS Agreement, the liability rules set forth in patents or plant variety rights themselves (in the form of farmers', breeders' and research exceptions), and other ad hoc reward regimes.

The cultural heritage of pastoralism - local knowledge, state identity and the global perspective: the example of local breeds in Morocco.

PubMed

Ben Hounet, Y; Brisebarre, A-M; Guinand, S

2016-11-01

Over the past few decades, the heritage designation process has come to impact on the way of life of many nomadic pastoralists across the world. Since the Convention Concerning the Protection of the World Cultural and Natural Heritage was adopted in 1972, policies for the conservation of protected areas have been implemented under the aegis of the United Nations Educational, Scientific and Cultural Organization (UNESCO), especially in countries of the South, with a varying impact on the practices and perceptions of pastoral communities. Heritage policies were further extended by the establishment of the list of Intangible Cultural Heritage (the Convention was adopted by the UNESCO General Conference in October 2003 and came into force in 2006) and the list of Cultural Landscapes (adoption in 1992, with the first site listed in 1993). This enthusiasm for heritage, which is felt by States and local communities alike, provides an opportunity to study the contradictions and changing perceptions of the nomadic and pastoral identity. In this context of wholesale heritage designation, it is interesting to examine how local knowledge - especially that on hardy animal breeds - is promoted and safeguarded. The authors focus on the case of Morocco, where the national association of sheep and goat breeders (ANOC) oversees breed selection and health policy for local breeds, in order to demonstrate that greater recognition of farmers' knowledge and their ability to identify hardy animals can ensure the sustainability of farms in both South and North from a socio-economic, genetic and health standpoint.

Genetic transformation in citrus: Thinking outside the box

USDA-ARS?s Scientific Manuscript database

Conventional breeding methods to incorporate resistance in citrus are very slow, due to extended juvenility from seedling trees and multiple generations needed to incorporate resistance from distant relatives. Use of transgenic methods may provide disease resistance in less time. Published protocols...

Grand challenges for crop science

USDA-ARS?s Scientific Manuscript database

Crop science is a highly integrative science using the disciplines of conventional plant breeding, transgenic crop improvement, plant physiology, and cropping system sciences to develop improved varieties of agronomic, turf, and forage crops to produce feed, food, fuel, and fiber for our world's gro...

Prospects for improving the salt tolerance of forest trees: A review

USGS Publications Warehouse

Allen, J.A.; Chambers, J.L.; Stine, M.

1994-01-01

Three major themes related to the improvement of salt tolerance in forest tree species are examined. First, evidence demonstrating that substantial intraspecific variation in salt tolerance exists in many species is presented. This evidence is important because it suggests that efforts to improve salt tolerance through conventional plant breeding techniques are justified. Second, the physiological and genetic mechanisms controlling salt tolerance are discussed briefly. Although salt tolerance involves the integration of numerous physiological processes, there is considerable evidence that differences in the ability to exclude Na+ and Cl- from leaves are the most important factors underlying intraspecific differences in tolerance. It is also becoming apparent that, although salt tolerance is a multigenic trait, major genes play an important role. Third, progress to date in improving salt tolerance of forest tree species is assessed. Compared with agricultural crops, relatively little progress has been made with either conventional or biotechnological methods, but field trials designed to test clones identified as salt tolerant in screening trials are underway now in several countries. We conclude that there is justification for cautious optimism about the prospects for improving salt tolerance in forest tree species.

The North American Breeding Bird Survey

USGS Publications Warehouse

Bystrak, D.; Ralph, C. John; Scott, J. Michael

1981-01-01

A brief history of the North American Breeding Bird Survey (BBS) and a discussion of the technique are presented. The approximately 2000 random roadside routes conducted yearly during the breeding season throughout North America produce an enormous bank of data on distribution and abundance of breeding birds with great potential use. Data on about one million total birds of 500 species per year are on computer tape to facilitate accessibility and are available to any serious investigator. The BBS includes the advantages of wide geographic coverage, sampling of most habitat types, standardization of data collection, and a relatively simple format. The Survey is limited by placement of roads (e.g., marshes and rugged mountainous areas are not well sampled), traffic noise interference in some cases and preference of some bird species for roadside habitats. These and other problems and biases of the BBS are discussed. The uniformity of the technique allows for detecting changes in populations and for creation of maps of relative abundance. Examples of each are presented.

Application of remotely sensed multispectral data to automated analysis of marshland vegetation. Inference to the location of breeding habitats of the salt marsh mosquito (Aedes Sollicitans)

NASA Technical Reports Server (NTRS)

Cibula, W. G.

1976-01-01

The techniques used for the automated classification of marshland vegetation and for the color-coded display of remotely acquired data to facilitate the control of mosquito breeding are presented. A multispectral scanner system and its mode of operation are described, and the computer processing techniques are discussed. The procedures for the selection of calibration sites are explained. Three methods for displaying color-coded classification data are presented.

Binucleation to breed new plant species adaptable to their environments

PubMed Central

Moustafa, Khaled

2015-01-01

Classical plant breeding approaches may fall short to breed new plant species of high environmental and ecological interests. Biotechnological and genetic manipulations, on the other hand, may hold more effective capabilities to circumvent the limitations of sexual incompatibility and conventional breeding programs. Given that plant cells encompass multiple copies of organellar genomes (mitochondrial and plastidial genomes), an important question could be raised about whether an artificial attempt to duplicate the nuclear genome might also be conceivable through a binucleation approach (generating plant cells with 2 nuclei from 2 different plant species) for potential production of new polyploidies that would characterize new plant species. Since the complexities of plant genomes are the result of multiple genome duplications, an artificial binucleation approach would thus be of some interest to eventually varying plant genomes and producing new polyploidy from related or distal plant species. Here, I discuss the potentiality of such an approach to engineer binucleated plant cells as a germ of new plant species to fulfill some environmental applications such as increasing the biodiversity and breeding new species adaptable to harsh environmental stresses and increasing green surfaces to reduce atmospheric pollutions in arid lands with poor vegetation. PMID:26322577

Magnetic resonance imaging in cadaver dogs with metallic vertebral implants at 3 Tesla: evaluation of the WARP-turbo spin echo sequence.

PubMed

Griffin, John F; Archambault, Nicholas S; Mankin, Joseph M; Wall, Corey R; Thompson, James A; Padua, Abraham; Purdy, David; Kerwin, Sharon C

2013-11-15

Laboratory investigation, ex vivo. Postoperative complications are common after spinal implantation procedures, and magnetic resonance imaging (MRI) would be the ideal modality to image these patients. Unfortunately, the implants cause artifacts that can render MRI nondiagnostic. The WARP-turbo spin echo (TSE) sequence has been developed to mitigate artifacts caused by metal. The objective of this investigation was to evaluate the performance of the WARP-TSE sequence in canine cadaver specimens after implantation with metallic vertebral implants. Magnetic field strength, implant type, and MRI acquisition technique all play a role in the severity of susceptibility artifacts. The WARP-TSE sequence uses increased bandwidth, view angle tilting, and SEMAC (slice-encoding metal artifact correction) to correct for susceptibility artifact. The WARP-TSE technique has outperformed conventional techniques in patients, after total hip arthroplasty. However, published reports of its application in subjects with vertebral column implants are lacking. Ex vivo anterior stabilization of the atlantoaxial joint was performed on 6 adult small breed (<8 kg) cadaver dogs using stainless steel screws and polymethylmethacrylate. Axial and sagittal T2-weighted and short tau inversion recovery MRI was performed using conventional pulse sequences and WARP-TSE sequences at 3 T. Images were assessed qualitatively and quantitatively. Images made with the WARP-TSE sequence had smaller susceptibility artifacts and superior spinal cord margin depiction. WARP-TSE sequences reduced the length over which susceptibility artifacts caused spinal cord margin depiction interference by 24.9% to 71.5% with scan times of approximately 12 to 16 minutes. The WARP-TSE sequence is a viable option for evaluating the vertebral column after implantation with stainless steel implants. N/A.

A pre-breeding screening program for transgenic boars based on fluorescence in situ hybridization assay.

PubMed

Bou, Gerelchimeg; Sun, Mingju; Lv, Ming; Zhu, Jiang; Li, Hui; Wang, Juan; Li, Lu; Liu, Zhongfeng; Zheng, Zhong; He, Wenteng; Kong, Qingran; Liu, Zhonghua

2014-08-01

For efficient transgenic herd expansion, only the transgenic animals that possess the ability to transmit transgene into next generation are considered for breeding. However, for transgenic pig, practically lacking a pre-breeding screening program, time, labor and money is always wasted to maintain non-transgenic pigs, low or null transgenic transmission pigs and the related fruitless gestations. Developing a pre-breeding screening program would make the transgenic herd expansion more economical and efficient. In this technical report, we proposed a three-step pre-breeding screening program for transgenic boars simply through combining the fluorescence in situ hybridization (FISH) assay with the common pre-breeding screening workflow. In the first step of screening, combined with general transgenic phenotype analysis, FISH is used to identify transgenic boars. In the second step of screening, combined with conventional semen test, FISH is used to detect transgenic sperm, thus to identify the individuals producing high quality semen and transgenic sperm. In the third step of screening, FISH is used to assess the in vitro fertilization embryos, thus finally to identify the individuals with the ability to produce transgenic embryos. By this three-step screening, the non-transgenic boars and boars with no ability to produce transgenic sperm or transgenic embryos would be eliminated; therefore only those boars could produce transgenic offspring are maintained and used for breeding and herd expansion. It is the first time a systematic pre-breeding screening program is proposed for transgenic pigs. This program might also be applied in other transgenic large animals, and provide an economical and efficient strategy for herd expansion.

Resistance and tolerance to Huanglongbing in citrus

USDA-ARS?s Scientific Manuscript database

The Stover-led research team focuses on developing improved citrus scion varieties, through both conventional breeding and transgenics, with special attention to confronting the threat of citrus huanglongbing (HLB). Collaborations are underway with more than 20 research groups around the world to ha...

Crossing eastern cottonwood in the greenhouse

Treesearch

R. E. Farmer; W. L. Nance

1968-01-01

Eastern cottonwood (Populus deltoides Bartr.) is the subject of breeding programs designed to develop planting stock with potential for rapid growth, desirable wood properties, and pest resistance (4). Techniques for making controlled crosses within the species are essential to breeding, and their development constitutes an early phase of genetics...

Comparative morphology, biology and histology of reproductive development in three lines of Manihot esculenta Crantz (Euphorbiaceae: Crotonoideae).

PubMed

Perera, P I P; Quintero, M; Dedicova, B; Kularatne, J D J S; Ceballos, H

2013-01-01

Cassava (Manihot esculenta), a major food staple in the tropics and subtropics, thrives even in environments undergoing threatening climate change. To satisfy the increasing demand for crop improvement and overcome the limitations of conventional breeding, the introduction of inbreeding techniques such as the production of doubled haploid lines via androgenesis or gynogenesis offers advantages. However, comprehensive studies on cassava flower bud biology or structural development are lacking and precise structural and biological information is a prerequisite to enhance the efficiency of these techniques. The floral biology of three selected cassava lines was studied, focusing on morphology, phenology and pollen biology (quantity, viability and dimorphism). Histological studies were also conducted on microsporogenesis/microgametogenesis and megasporogenesis/megagameto-genesis to generate precise developmental data for these lines. Male and female cyathia have distinct developmental phases. Pollen viability was high during immature stages of plant development; however, pollen mortality was common at later stages. Pollen trimorphism in male gametophytes towards the larger or smaller pollen size, as compared with normal size, was observed. Ten characteristic events were identified in male gametogenesis and six in female gametogenesis that were correlated with flower bud diameter. Male gametophyte diameter at different developmental stages was also determined. Results indicate that the three lines did not differ significantly, except regarding a few morphological aspects such as plant height, flower colour and number of male cyathia. Pollen grains were initially viable, but viability decreased drastically at later stages of growth. Abnormal meiosis or mitosis triggered pollen trimorphism. The demonstrated sequential events of reproductive development generated valuable information at the cellular level, which will help close the current information gap for cassava improvement via breeding programmes and doubled haploid plant production.

Partition of genetic trends by origin in Landrace and Large-White pigs.

PubMed

Škorput, D; Gorjanc, G; Kasap, A; Luković, Z

2015-10-01

The objective of this study was to analyse the effectiveness of genetic improvement via domestic selection and import for backfat thickness and time on test in a conventional pig breeding programme for Landrace (L) and Large-White (LW) breeds. Phenotype data was available for 25 553 L and 10 432 LW pigs born between 2002 and 2012 from four large-scale farms and 72 family farms. Pedigree information indicated whether each animal was born and registered within the domestic breeding programme or has been imported. This information was used for defining the genetic groups of unknown parents in a pedigree and the partitioning analysis. Breeding values were estimated using a Bayesian analysis of an animal model with and without genetic groups. Such analysis enabled full Bayesian inference of the genetic trends and their partitioning by the origin of germplasm. Estimates of genetic group indicated that imported germplasm was overall better than domestic and substantial changes in estimates of breeding values was observed when genetic group were fitted. The estimated genetic trends in L were favourable and significantly different from zero by the end of the analysed period. Overall, the genetic trends in LW were not different from zero. The relative contribution of imported germplasm to genetic trends was large, especially towards the end of analysed period with 78% and 67% in L and from 50% to 67% in LW. The analyses suggest that domestic breeding activities and sources of imported animals need to be re-evaluated, in particular in LW breed.

Cadmium and lead accumulations and agronomic quality of a newly bred pollution-safe cultivar (PSC) of water spinach.

PubMed

Huang, Ying-Ying; Mu, Yang-Xiu; He, Chun-Tao; Fu, Hui-Ling; Wang, Xue-Song; Gong, Fei-Yue; Yang, Zhong-Yi

2018-04-01

Breeding for pollution-safe cultivars (PSCs) can reduce pollutant accumulation in crops. However, the PSC breeding would face the risk of nutritional quality reduction, which is usually ignored in conventional breeding programs targeting to increase crop yield or nutritional quality. Thus, the doubt whether the risk would exist has to be clarified for supporting the PSC breeding. In the present study, a newly bred Cd/Pb-PSC of water spinach (Ipomoea aquatic Forsk.) and its parents (QLQ with low-Cd/Pb accumulation ability and T308 with high yield) of water spinach were employed to clarify the above-mentioned issue. Yields, and concentrations of Cd, Pb, nitrite, and organic and inorganic nutrients in shoots of the three experimental lines were determined. There were no significant differences in Cd/Pb concentration between the new PSC and QLQ, in nitrite content between the new PSC and its two parents and in yield between the new PSC and T308. It is decisively significant that shoot concentrations of organic and inorganic nutrients in the Cd/Pb-PSC were as high as those in one of its parents. It is affirmed that the breeding operations (crossing and consequently continuous selfing) for lowering Cd/Pb accumulation capacity of water spinach would not lower the nutritional values of the obtained Cd/Pb-PSCs from the breeding, which should be a pillar that supports the feasibility to minimize Cd/Pb pollution in vegetables using PSC-breeding method.

Feasibility for improving phytonutrient content in vegetable crops using conventional breeding strategies: case study with carotenoids and tocopherols in sweet corn and broccoli.

PubMed

Ibrahim, Khalid E; Juvik, John A

2009-06-10

Among vegetables, sweet corn ( Zea mays L.) and broccoli ( Brassica oleracea L. ssp. italica) are important sources of dietary carotenoids and tocopherols. Because medical evidence suggests that carotenoid and tocopherol health-promoting activity acts in a dose-dependent manner, conventional breeding to develop elite sweet corn and broccoli germplasm with enhanced levels of these phytochemicals will potentially promote health among the consuming public. This investigation includes the quantitative analysis of carotenoid and tocopherol contents of 41 corn and 24 broccoli genotypes grown in multiple environments (years and seasons in one location) to partition the variation into genetic, environment, and genotype by environment interaction (GxE) components and measure the phenotypic stability of genotypes for these phytochemicals. The primary carotenoids and tocopherols in corn were lutein and gamma-tocopherol (65 and 73% of total carotenoid and tocopherol, respectively), whereas beta-carotene and alpha-tocopherol were dominant in broccoli (65 and 79% of total carotenoid and tocopherol, respectively). Partitioning of the variance indicated that genetic differences among the genotypes averaged for the primary compounds in corn (lutein, zeaxanthin, and alpha- and gamma-tocopherol) and broccoli (beta-carotene, lutein, and alpha- and gamma-tocopherol) accounted for the largest proportion of the variation (67 and 55% of total phenotypic variation averaged across the phytochemicals in sweet corn and broccoli, respectively). Stability analysis identified several corn (IL451b sh2 and IL2027-8 sh2) and broccoli ('Pirate' and 'Baccus') genotypes with relatively high mean concentrations for the various carotenoids and tocopherols that were comparatively stable across seasons and years. The results of this investigation suggest that sweet corn and broccoli germplasm with enhanced concentrations of carotenoids and tocopherols can be developed using conventional breeding protocols.

Review: Applications and benefits of sexed semen in dairy and beef herds.

PubMed

Holden, S A; Butler, S T

2018-06-01

The use of sexed semen in dairy and beef cattle production provides a number of benefits at both farm and industry levels. There is an increasing demand for dairy and beef products across the globe, which will necessitate a greater focus on improving production efficiency. In dairy farming, there is surplus production of unwanted male calves. Male dairy calves increase the risk of dystocia compared with heifer calves, and as an unwanted by-product of breeding with conventional semen, they have a low economic value. Incorporating sexed semen into the breeding programme can minimise the number of unwanted male dairy calves and reduce dystocia. Sexed semen can be used to generate herd replacements and additional heifers for herd expansion at a faster rate from within the herd, thereby minimising biosecurity risks associated with bringing in animals from different herds. Furthermore, the use of sexed semen can increase herd genetic gain compared with use of non-sorted semen. In dairy herds, a sustainable breeding strategy could combine usage of sexed semen to generate replacements only, and usage of beef semen on all dams that are not suitable for generating replacements. This results in increased genetic gain in dairy herd, increased value of beef output from the dairy herd, and reduced greenhouse gas emissions from beef. It is important to note, however, that even a small decrease in fertility of sexed semen relative to conventional semen can negate much of the economic benefit. A high fertility sexed semen product has the potential to accelerate herd expansion, minimise waste production, improve animal welfare and increase profitability compared with non-sorted conventional semen.

Genetic Improvement of Switchgrass and Other Herbaceous Plants for Use as Biomass Fuel Feedstock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogel, K.P.

2001-01-11

It should be highly feasible to genetically modify the feedstock quality of switchgrass and other herbaceous plants using both conventional and molecular breeding techniques. Effectiveness of breeding to modify herbages of switchgrass and other perennial and annual herbaceous species has already been demonstrated. The use of molecular markers and transformation technology will greatly enhance the capability of breeders to modify the plant structure and cell walls of herbaceous plants. It will be necessary to monitor gene flow to remnant wild populations of plants and have strategies available to curtail gene flow if it becomes a potential problem. It also willmore » be necessary to monitor plant survival and long-term productivity as affected by genetic changes that improve forage quality. Information on the conversion processes that will be used and the biomass characteristics that affect conversion efficiency and rate is absolutely essential as well as information on the relative economic value of specific traits. Because most forage or biomass quality characteristics are highly affected by plant maturity, it is suggested that plant material of specific maturity stages be used in research to determining desirable feedstock quality characteristics. Plant material could be collected at various stages of development from an array of environments and storage conditions that could be used in conversion research. The same plant material could be used to develop NIRS calibrations that could be used by breeders in their selection programs and also to develop criteria for a feedstock quality assessment program. Breeding for improved feedstock quality will likely affect the rate of improvement of biomass production per acre. If the same level of resources are used, multi-trait breeding simply reduces the selection pressure and hence the breeding progress that can be made for a single trait unless all the traits are highly correlated. Since desirable feedstock traits are likely to be similar to IVDMD, it is likely that they will not be highly positively correlated with yield. Hence to achieve target yields and improve specific quality traits, it will likely be necessary to increase the resources available to plant breeders. Marker assisted selection will be extremely useful in breeding for quality traits, particularly for traits that can be affected by modifying a few genes. Genetic markers are going to be needed for monitoring gene flow to wild populations. Transformation will be a very useful tool for determining the affects of specific genes on biomass feedstock quality.« less

Effectors as tools in disease resistance breeding against biotrophic, hemibiotrophic, and necrotrophic plant pathogens.

PubMed

Vleeshouwers, Vivianne G A A; Oliver, Richard P

2014-03-01

One of most important challenges in plant breeding is improving resistance to the plethora of pathogens that threaten our crops. The ever-growing world population, changing pathogen populations, and fungicide resistance issues have increased the urgency of this task. In addition to a vital inflow of novel resistance sources into breeding programs, the functional characterization and deployment of resistance also needs improvement. Therefore, plant breeders need to adopt new strategies and techniques. In modern resistance breeding, effectors are emerging as tools to accelerate and improve the identification, functional characterization, and deployment of resistance genes. Since genome-wide catalogues of effectors have become available for various pathogens, including biotrophs as well as necrotrophs, effector-assisted breeding has been shown to be successful for various crops. "Effectoromics" has contributed to classical resistance breeding as well as for genetically modified approaches. Here, we present an overview of how effector-assisted breeding and deployment is being exploited for various pathosystems.

Limitations of captive breeding in endangered species recovery

USGS Publications Warehouse

Snyder, N.F.R.; Derrickson, S.R.; Beissenger, S.R.; Wiley, J.W.; Smith, T.B.; Toone, W.D.; Miller, B.

1996-01-01

The use of captive breeding in species recovery has grown enormously in recent years, but without a concurrent growth in appreciation of its limitations. Problems with (1) establishing self-sufficient captive populations, (2) poor success in reintroductions, (3.) high costs, (4) domestication, (5) preemption of other recovery techniques, (6) disease outbreaks, and (7) maintaining administrative continuity have all been significant. The technique has often been invoked prematurely and should not normally be employed before a careful field evaluation of costs and benefits of all conservation alternatives has been accomplished and a determination made that captive breeding is essential for species survival. Merely demonstrating that a species population is declining or bas fallen below what may be a minimum viable size does not constitute enough analysis to justify captive breeding as a recovery measure. Captive breeding should be reviewed as a last resort in species recovery and not a prophylactic or long-term solution because of the inexorable genetic and phenotypic changes that occur in captive environments. Captive breeding can play a crucial role in recovery of some species for witch effective alternatives are unavailable in the short term. However, it should not displace habitat and ecosystem protection nor should it be invoked in the absence of comprehensive efforts to maintain or restore populations in wild habitats. Zoological institutions with captive breeding programs should operate under carefully defined conditions of disease prevention and genetic/behavioral management. More important, these institutions should help preserve biodiversity through their capacities for public education, professional training, research, and support of in situ conservation efforts.

FIELD DEPLOYABLE TECHNIQUES TO MONITOR EXPOSURE TO ENVIRONMENTAL ESTROGENS THROUGHOUT THE REPRODUCTIVE CYCLE OF WILD BIRDS

EPA Science Inventory

Concern about potential for endocrine disrupting chemicals to interfere with normal breeding behaviors of wildlife prompted this study of effects of exposure to environmental estrogens during the breeding cycle of wild birds. The house finch (Carpodacus mexicanus) was selected as...

Ecogeography and utility to plant breeding of the crop wild relatives of sunflower (Helianthus annuus L.)

USDA-ARS?s Scientific Manuscript database

Crop wild relatives (CWR) are a rich source of genetic diversity for crop improvement. Combining ecogeographic and phylogenetic techniques can inform both conservation and breeding. Geographic occurrence, bioclimatic, and biophysical data were used to predict species distributions, range overlap and...

The distributions of Chinese yak breeds in response to climate change over the past 50 years.

PubMed

Wu, Jianguo

2016-07-01

The effects of prior climate change on yak breed distributions are uncertain. Here, we measured changes in the distributions of 12 yak breeds over the past 50 years in China and examined whether the changes could be attributed to climate change. Long-term records of yak breed distribution, grey relational analysis, fuzzy sets classification techniques and attribution methods were used. Over the past 50 years, the distributions of several yak breeds have changed in multiple directions, mainly shifting northward or westward, and most of these changes are related to the thermal index. Driven by climate change over the past years, the suitable range and the distribution centers of certain yak breeds have changed with fluctuation and have mainly shifted northward, eastward or southward. The consistency of observed versus predicted changes in distribution boundaries or distribution centers is higher for certain yak breeds. Changes in the eastern distribution boundary of two yak breeds over the past 50 years can be attributed to climate change. © 2015 Japanese Society of Animal Science.

Capitalizing on fine milk composition for breeding and management of dairy cows.

PubMed

Gengler, N; Soyeurt, H; Dehareng, F; Bastin, C; Colinet, F; Hammami, H; Vanrobays, M-L; Lainé, A; Vanderick, S; Grelet, C; Vanlierde, A; Froidmont, E; Dardenne, P

2016-05-01

The challenge of managing and breeding dairy cows is permanently adapting to changing production circumstances under socio-economic constraints. If managing and breeding address different timeframes of action, both need relevant phenotypes that allow for precise monitoring of the status of the cows, and their health, behavior, and well-being as well as their environmental impact and the quality of their products (i.e., milk and subsequently dairy products). Milk composition has been identified as an important source of information because it could reflect, at least partially, all these elements. Major conventional milk components such as fat, protein, urea, and lactose contents are routinely predicted by mid-infrared (MIR) spectrometry and have been widely used for these purposes. But, milk composition is much more complex and other nonconventional milk components, potentially predicted by MIR, might be informative. Such new milk-based phenotypes should be considered given that they are cheap, rapidly obtained, usable on a large scale, robust, and reliable. In a first approach, new phenotypes can be predicted from MIR spectra using techniques based on classical prediction equations. This method was used successfully for many novel traits (e.g., fatty acids, lactoferrin, minerals, milk technological properties, citrate) that can be then useful for management and breeding purposes. An innovation was to consider the longitudinal nature of the relationship between the trait of interest and the MIR spectra (e.g., to predict methane from MIR). By avoiding intermediate steps, prediction errors can be minimized when traits of interest (e.g., methane, energy balance, ketosis) are predicted directly from MIR spectra. In a second approach, research is ongoing to detect and exploit patterns in an innovative manner, by comparing observed with expected MIR spectra directly (e.g., pregnancy). All of these traits can then be used to define best practices, adjust feeding and health management, improve animal welfare, improve milk quality, and mitigate environmental impact. Under the condition that MIR data are available on a large scale, phenotypes for these traits will allow genetic and genomic evaluations. Introduction of novel traits into the breeding objectives will need additional research to clarify socio-economic weights and genetic correlations with other traits of interest. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Glyphosate-tolerant soybeans remain compositionally equivalent to conventional soybeans (Glycine max L.) during three years of field testing.

PubMed

McCann, Melinda C; Liu, Keshun; Trujillo, William A; Dobert, Raymond C

2005-06-29

Previous studies have shown that the composition of glyphosate-tolerant soybeans (GTS) and selected processed fractions was substantially equivalent to that of conventional soybeans over a wide range of analytes. This study was designed to determine if the composition of GTS remains substantially equivalent to conventional soybeans over the course of several years and when introduced into multiple genetic backgrounds. Soybean seed samples of both GTS and conventional varieties were harvested during 2000, 2001, and 2002 and analyzed for the levels of proximates, lectin, trypsin inhibitor, and isoflavones. The measured analytes are representative of the basic nutritional and biologically active components in soybeans. Results show a similar range of natural variability for the GTS soybeans as well as conventional soybeans. It was concluded that the composition of commercial GTS over the three years of breeding into multiple varieties remains equivalent to that of conventional soybeans.

Prioritization based on neutral genetic diversity may fail to conserve important characteristics in cattle breeds.

PubMed

Hall, S J G; Lenstra, J A; Deeming, D C

2012-06-01

Conservation of the intraspecific genetic diversity of livestock species requires protocols that assess between-breed genetic variability and also take into account differences among individuals within breeds. Here, we focus on variation between breeds. Conservation of neutral genetic variation has been seen as promoting, through linkage processes, the retention of useful and potentially useful variation. Using public information on beef cattle breeds, with a total of 165 data sets each relating to a breed comparison of a performance variable, we have tested this paradigm by calculating the correlations between pairwise breed differences in performance and pairwise genetic distances deduced from biochemical and immunological polymorphisms, microsatellites and single-nucleotide polymorphisms. As already observed in floral and faunal biodiversity, significant positive correlations (n=54) were found, but many correlations were non-significant (n=100) or significantly negative (n=11). This implies that maximizing conserved neutral genetic variation with current techniques may conserve breed-level genetic variation in some traits but not in others and supports the view that genetic distance measurements based on neutral genetic variation are not sufficient as a determinant of conservation priority among breeds. © 2011 Blackwell Verlag GmbH.

Isolation and identification of multidrug-resistant Staphylococcus haemolyticus from a laboratory-breeding mouse.

PubMed

Huang, Fengying; Meng, Qiuping; Tan, Guanghong; Huang, Yonghao; Wang, Hua; Mei, Wenli; Dai, Haofu

2011-06-01

To analysis and identify a bacterium strain isolated from laboratory breeding mouse far away from a hospital. Phenotype of the isolate was investigated by conventional microbiological methods, including Gram-staining, colony morphology, tests for haemolysis, catalase, coagulase, and antimicrobial susceptibility test. The mecA and 16S rRNA genes were amplified by the polymerase chain reaction (PCR) and sequenced. The base sequence of the PCR product was compared with known 16S rRNA gene sequences in the GenBank database by phylogenetic analysis and multiple sequence alignment. The isolate in this study was a gram positive, coagulase negative, and catalase positive coccus. The isolate was resistant to oxacillin, methicillin, penicillin, ampicillin, cefazolin, ciprofloxacin erythromycin, et al. PCR results indicated that the isolate was mecA gene positive and its 16S rRNA was 1 465 bp. Phylogenetic analysis of the resultant 16S rRNA indicated the isolate belonged to genus Saphylococcus, and multiple sequence alignment showed that the isolate was Saphylococcus haemolyticus with only one base difference from the corresponding 16S rRNA deposited in the GenBank. 16S rRNA gene sequencing is a suitable technique for non-specialist researchers. Laboratory animals are possible sources of lethal pathogens, and researchers must adapt protective measures when they manipulate animals. Copyright © 2011 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

Targeted Segment Transfer from Rye Chromosome 2R to Wheat Chromosomes 2A, 2B, and 7B.

PubMed

Ren, Tianheng; Li, Zhi; Yan, Benju; Tan, Feiquan; Tang, Zongxiang; Fu, Shulan; Yang, Manyu; Ren, Zhenglong

2017-01-01

Increased chromosome instability was induced by a rye (Secale cereale L.) monosomic 2R chromosome into wheat (Triticum aestivum L.). Centromere breakage and telomere dysfunction result in high rates of chromosome aberrations, including breakages, fissions, fusions, deletions, and translocations. Plants with target traits were sequentially selected to produce a breeding population, from which 3 translocation lines with target traits have been selected. In these lines, wheat chromosomes 2A, 2B, and 7B recombined with segments of the rye chromosome arm 2RL. This was detected by FISH analysis using repeat sequences pSc119.2, pAs1 and genomic DNA of rye together as probes. The translocation chromosomes in these lines were named as 2ASMR, 2BSMR, and 7BSMR. The small segments that were transferred into wheat consisted of pSc119.2 repeats and other chromatin regions that conferred resistance to stripe rust and expressed target traits. These translocation lines were highly resistant to stripe rust, and expressed several typical traits that were associated with chromosome arm 2RL, which are better than those of its wheat parent, disomic addition, and substitution lines that show agronomic characteristics. The integration of molecular methods and conventional techniques to improve wheat breeding schemes are discussed. © 2017 S. Karger AG, Basel.

Evaluating the sensory properties of unpolished Australian wild rice.

PubMed

Tikapunya, Tiparat; Henry, Robert J; Smyth, Heather

2018-01-01

Australian wild rices are genetically distinct from commercially cultivated rices and present new opportunities for the development of improved rice cultivars. Before use in rice breeding, the eating and cooking properties of Australian wild rice must first be understood as these are key factors in determining rice quality and consumer acceptance. Samples of Australian wild rice (taxa B) were collected and evaluated together with a commercial Canadian wild rice (Zizania aquatic L.), Oryza sativa L.cv. Nipponbare, and selected commercial rices including long grain, medium grain, basmati, red basmati, and red rice. Cooking profiles were established, physical traits were measured and conventional descriptive analysis techniques were used to compare the sensory properties of the unpolished rices. Twenty six descriptors, together with definitions, were developed with a panel of twelve experienced assessors including aroma, flavour, texture and aftertaste attributes. Results reveal that the Australian wild rice had a mild aroma and flavour similar to that of red rice and red basmati but without the lingering aftertaste. In terms of texture, the wild rice was firmer, and somewhat crunchy and chewy rather than soft and fluffy despite requiring a longer cooking time. The sensory, physical and cooking profiles indicate that Australian wild rice has a high potential for commercialization in itself and provides a suitable genetic source for breeding programs, particularly in the coloured rice market. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integrating genomic selection into dairy cattle breeding programmes: a review.

PubMed

Bouquet, A; Juga, J

2013-05-01

Extensive genetic progress has been achieved in dairy cattle populations on many traits of economic importance because of efficient breeding programmes. Success of these programmes has relied on progeny testing of the best young males to accurately assess their genetic merit and hence their potential for breeding. Over the last few years, the integration of dense genomic information into statistical tools used to make selection decisions, commonly referred to as genomic selection, has enabled gains in predicting accuracy of breeding values for young animals without own performance. The possibility to select animals at an early stage allows defining new breeding strategies aimed at boosting genetic progress while reducing costs. The first objective of this article was to review methods used to model and optimize breeding schemes integrating genomic selection and to discuss their relative advantages and limitations. The second objective was to summarize the main results and perspectives on the use of genomic selection in practical breeding schemes, on the basis of the example of dairy cattle populations. Two main designs of breeding programmes integrating genomic selection were studied in dairy cattle. Genomic selection can be used either for pre-selecting males to be progeny tested or for selecting males to be used as active sires in the population. The first option produces moderate genetic gains without changing the structure of breeding programmes. The second option leads to large genetic gains, up to double those of conventional schemes because of a major reduction in the mean generation interval, but it requires greater changes in breeding programme structure. The literature suggests that genomic selection becomes more attractive when it is coupled with embryo transfer technologies to further increase selection intensity on the dam-to-sire pathway. The use of genomic information also offers new opportunities to improve preservation of genetic variation. However, recent simulation studies have shown that putting constraints on genomic inbreeding rates for defining optimal contributions of breeding animals could significantly reduce achievable genetic gain. Finally, the article summarizes the potential of genomic selection to include new traits in the breeding goal to meet societal demands regarding animal health and environmental efficiency in animal production.

Estimating population parameters for northern and southern breeding populations of Canada geese

USGS Publications Warehouse

Hestbeck, J.B.; Rusch, Donald H.; Samuel, Michael D.; Humburg, Dale D.; Sullivan, Brian D.

1998-01-01

Canada geese (Branta canadensis) have been managed largely as a migratory resource. In the 1960's, Canada goose flocks were restored to historic breeding ranges in the United States and southern Canada to enhance recreational opportunity for observation and harvest. These populations of southern breeding geese have rapidly expanded, increasing conflicts with social and economic interests and causing the Midwinter Waterfowl Survey to be less effective as a management tool to monitor migrant populations. Wildlife agencies need methods to control local, southern breeding geese that reduce conflicts while providing adequate protection to populations of northern breeding geese. New techniques have been developed using mark-resight data from neck-banded geese to estimate distribution and population size during the late summer, fall, and mid-winter. Survival and movement rates can be estimated over special early or late hunting seasons, traditional fall-winter hunting season, and nonharvest periods. Direct recovery rates can be estimated for special and traditional harvest periods and these recovery rates can be related to survival and movement rates. Changes in harvest regulations can be related to changes in recovery, survival, and movement rates for specific cohorts of Canada geese. These techniques can be used to monitor population status and determine more appropriate harvest strategies.

Comparison of chemical attractants against dung beetles and application for rangeland and animal health

USDA-ARS?s Scientific Manuscript database

Dung beetles (Coleoptera: Scarabaeidae) play a major role in nutrient cycling, soil aeration, and biological control of pests and parasites that breed in manure. Habitat fragmentation, pesticide usage, and conventional agricultural practices threaten dung beetle diversity, and their conservation is ...

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Code of Federal Regulations, 2014 CFR

2014-10-01

... captivity or artificially propagated. (D) Appendix-I specimens from registered commercial breeding operations. (E) Appendix-I plants artificially propagated for commercial purposes. (F) Other specimens that..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE...

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Code of Federal Regulations, 2012 CFR

2012-10-01

... captivity or artificially propagated. (D) Appendix-I specimens from registered commercial breeding operations. (E) Appendix-I plants artificially propagated for commercial purposes. (F) Other specimens that..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE...

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Code of Federal Regulations, 2010 CFR

2010-10-01

... captivity or artificially propagated. (D) Appendix-I specimens from registered commercial breeding operations. (E) Appendix-I plants artificially propagated for commercial purposes. (F) Other specimens that..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE...

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Code of Federal Regulations, 2013 CFR

2013-10-01

... captivity or artificially propagated. (D) Appendix-I specimens from registered commercial breeding operations. (E) Appendix-I plants artificially propagated for commercial purposes. (F) Other specimens that..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE...

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Code of Federal Regulations, 2011 CFR

2011-10-01

... captivity or artificially propagated. (D) Appendix-I specimens from registered commercial breeding operations. (E) Appendix-I plants artificially propagated for commercial purposes. (F) Other specimens that..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE...

Mendel’s legacy lives through management of sugarcane pests

USDA-ARS?s Scientific Manuscript database

Entomology and classical Mendelian genetics have had a long association and Mendel’s legacy continues to live through sugarcane pests. In this paper, we discuss examples of that legacy as applied to conventional and molecular approaches to breeding for insect resistance. We also discuss the applicat...

Phenotypic approaches to drought in cassava: review

PubMed Central

Okogbenin, Emmanuel; Setter, Tim L.; Ferguson, Morag; Mutegi, Rose; Ceballos, Hernan; Olasanmi, Bunmi; Fregene, Martin

2012-01-01

Cassava is an important crop in Africa, Asia, Latin America, and the Caribbean. Cassava can be produced adequately in drought conditions making it the ideal food security crop in marginal environments. Although cassava can tolerate drought stress, it can be genetically improved to enhance productivity in such environments. Drought adaptation studies in over three decades in cassava have identified relevant mechanisms which have been explored in conventional breeding. Drought is a quantitative trait and its multigenic nature makes it very challenging to effectively manipulate and combine genes in breeding for rapid genetic gain and selection process. Cassava has a long growth cycle of 12–18 months which invariably contributes to a long breeding scheme for the crop. Modern breeding using advances in genomics and improved genotyping, is facilitating the dissection and genetic analysis of complex traits including drought tolerance, thus helping to better elucidate and understand the genetic basis of such traits. A beneficial goal of new innovative breeding strategies is to shorten the breeding cycle using minimized, efficient or fast phenotyping protocols. While high throughput genotyping have been achieved, this is rarely the case for phenotyping for drought adaptation. Some of the storage root phenotyping in cassava are often done very late in the evaluation cycle making selection process very slow. This paper highlights some modified traits suitable for early-growth phase phenotyping that may be used to reduce drought phenotyping cycle in cassava. Such modified traits can significantly complement the high throughput genotyping procedures to fast track breeding of improved drought tolerant varieties. The need for metabolite profiling, improved phenomics to take advantage of next generation sequencing technologies and high throughput phenotyping are basic steps for future direction to improve genetic gain and maximize speed for drought tolerance breeding. PMID:23717282

Tree-breeding technique: some effects of continuous bagging

Treesearch

Jonathan W. Wright

1951-01-01

In tree-breeding operations, it is standard practice to protect the tree flowers with vegetable parchment or sausage-casing bags during the pollination period so no unwanted pollen can get to them. Since the bags often damage the tree, they are usually removed as soon as the pollination period ends - within 2 or 3 weeks.

Regulating transgenic crops sensibly: lessons from plant breeding, biotechnology and genomics.

PubMed

Bradford, Kent J; Van Deynze, Allen; Gutterson, Neal; Parrott, Wayne; Strauss, Steven H

2005-04-01

The costs of meeting regulatory requirements and market restrictions guided by regulatory criteria are substantial impediments to the commercialization of transgenic crops. Although a cautious approach may have been prudent initially, we argue that some regulatory requirements can now be modified to reduce costs and uncertainty without compromising safety. Long-accepted plant breeding methods for incorporating new diversity into crop varieties, experience from two decades of research on and commercialization of transgenic crops, and expanding knowledge of plant genome structure and dynamics all indicate that if a gene or trait is safe, the genetic engineering process itself presents little potential for unexpected consequences that would not be identified or eliminated in the variety development process before commercialization. We propose that as in conventional breeding, regulatory emphasis should be on phenotypic rather than genomic characteristics once a gene or trait has been shown to be safe.

Early seedling vigour, an imperative trait for direct-seeded rice: an overview on physio-morphological parameters and molecular markers.

PubMed

Mahender, A; Anandan, A; Pradhan, S K

2015-05-01

Rapid uniform germination and accumulation of biomass during initial phase of seedling establishment is an essential phenotypic trait considered as early seedling vigour for direct seeded situation in rice irrespective of environment. Enhanced role of carbohydrate, amylase, growth hormones, antioxidant enzymes and ascorbic acid brings changes in vigour and phenotype of seedling. Early establishment and demanding life form dominate the surroundings. Crop plant that has better growth overdrives the weed plant and suppresses its growth. Seedling early vigour is the characteristic of seed quality and describes the rapid, uniform germination and the establishment of strong seedlings in any environmental condition. The phenotype of modern rice varieties has been changed into adaptable for transplanted rice with thirst toward water and selection pressure for semi-dwarf architecture resulting in reduced early vigour. Decreasing freshwater availability and rising labour cost drives the search for a suitable alternative management system to enhance grain yield productivity for the burgeoning world population. In view of these issues, much attention has been focused on dry direct-seeded rice, because it demands low input. A rice cultivar with a strong seedling vigour trait is desirable in case of direct seeding. However, seedling vigour has not been selected in crop improvement programmes in conventional breeding due to its complex nature and quantitative inheritance. Molecular markers have been proven effective in increasing selection efficiency, particularly for quantitative traits that are simply inherited. Marker-assisted selection approach has facilitated efficient and precise transfer of genes/QTL(s) into many crop species and suggests a speedy and efficient technique over conventional breeding and selection methods. In this review, we present the findings and investigations in the field of seedling vigour in rice that includes the nature of inheritance of physio-morphological and biochemical traits and QTLs to assist plant breeders who work for direct-seeded rice.

Metabolite fingerprinting of urine suggests breed-specific dietary metabolism differences in domestic dogs.

PubMed

Beckmann, Manfred; Enot, David P; Overy, David P; Scott, Ian M; Jones, Paul G; Allaway, David; Draper, John

2010-04-01

Selective breeding of dogs has culminated in a large number of modern breeds distinctive in terms of size, shape and behaviour. Inadvertently, a range of breed-specific genetic disorders have become fixed in some pure-bred populations. Several inherited conditions confer chronic metabolic defects that are influenced strongly by diet, but it is likely that many less obvious breed-specific differences in physiology exist. Using Labrador retrievers and miniature Schnauzers maintained in a simulated domestic setting on a controlled diet, an experimental design was validated in relation to husbandry, sampling and sample processing for metabolomics. Metabolite fingerprints were generated from 'spot' urine samples using flow injection electrospray MS (FIE-MS). With class based on breed, urine chemical fingerprints were modelled using Random Forest (a supervised data classification technique), and metabolite features (m/z) explanatory of breed-specific differences were putatively annotated using the ARMeC database (http://www.armec.org). GC-MS profiling to confirm FIE-MS predictions indicated major breed-specific differences centred on the metabolism of diet-related polyphenols. Metabolism of further diet components, including potentially prebiotic oligosaccharides, animal-derived fats and glycerol, appeared significantly different between the two breeds. Analysis of the urinary metabolome of young male dogs representative of a wider range of breeds from animals maintained under domestic conditions on unknown diets provided preliminary evidence that many breeds may indeed have distinctive metabolic differences, with significant differences particularly apparent in comparisons between large and smaller breeds.

Haemonchotolerance in West African Dwarf goats: contribution to sustainable, anthelmintics-free helminth control in traditionally managed Nigerian dwarf goats

PubMed Central

Chiejina, Samuel N.; Behnke, Jerzy M.; Fakae, Barineme B.

2015-01-01

West African Dwarf (WAD) goats are extremely important in the rural village economy of West Africa, but still little is known about their biology, ecology and capacity to cope with gastrointestinal nematode (GIN) infections. Here, we summarise the history of this breed and explain its economic importance in rural West Africa. We review recent work showing that Nigerian WAD goats are highly trypanotolerant and resist infections with Haemonchus contortus more effectively than other breeds of domestic goat (haemonchotolerance). We believe that haemonchotolerance is largely responsible for the generally low level GIN infections and absence of clinical haemonchosis in WADs under field conditions, and has contributed to the relatively successful and sustainable, anthelmintics-free, small-scale system of goat husbandry in Nigeria’s humid zone, and is immunologically based and genetically controlled. If haemonchotolerance can be shown to be genetically controlled, it should be possible to exploit the underlying genes to improve GIN resistance among productive fibre and milk producing breeds of goats, most of which are highly susceptible to nematode infections. Genetic resistance to GIN and trypanosome infections would obviate the need for expensive chemotherapy, mostly unaffordable to small-holder farmers in Africa, and a significant cost of goat husbandry in more developed countries. Either introgression of resistance alleles into susceptible breeds by conventional breeding, or transgenesis could be used to develop novel parasite-resistant, but highly productive breeds, or to improve the resistance of existing breeds, benefitting the local West African rural economy as well as global caprine livestock agriculture. PMID:25744655

Current Status of Early Blight Resistance in Tomato: An Update

PubMed Central

Adhikari, Pragya; Oh, Yeonyee; Panthee, Dilip R.

2017-01-01

Early blight (EB) is one of the dreadful diseases of tomato caused by several species of Alternaria including Alternaria linariae (which includes A. solani and A. tomatophila), as well as A. alternata. In some instances, annual economic yield losses due to EB have been estimated at 79%. Alternaria are known only to reproduce asexually, but a highly-virulent isolate has the potential to overcome existing resistance genes. Currently, cultural practices and fungicide applications are employed for the management of EB due to the lack of strong resistant cultivars. Resistance sources have been identified in wild species of tomato; some breeding lines and cultivars with moderate resistance have been developed through conventional breeding methods. Polygenic inheritance of EB resistance, insufficient resistance in cultivated species and the association of EB resistance with undesirable horticultural traits have thwarted the effective breeding of EB resistance in tomato. Several quantitative trait loci (QTL) conferring EB resistance have been detected in the populations derived from different wild species including Solanum habrochaites, Solanum arcanum and S. pimpinellifolium, but none of them could be used in EB resistance breeding due to low individual QTL effects. Pyramiding of those QTLs would provide strong resistance. More research is needed to identify additional sources of useful resistance, to incorporate resistant QTLs into breeding lines through marker-assisted selection (MAS) and to develop resistant cultivars with desirable horticultural traits including high yielding potential and early maturity. This paper will review the current understanding of causal agents of EB of tomato, resistance genetics and breeding, problems associated with breeding and future prospects. PMID:28934121

Exploiting genotypic variation in plant nutrient accumulation to alleviate micronutrient deficiency in populations.

PubMed

Genc, Yusuf; Humphries, Julia M; Lyons, Graham H; Graham, Robin D

2005-01-01

More than 2 billion people consume diets that are less diverse than 30 years ago, leading to deficiencies in micronutrients, especially iron (Fe), zinc (Zn), selenium (Se), iodine (I), and also vitamin A. A strategy that exploits genetic variability to breed staple crops with enhanced ability to fortify themselves with micronutrients (genetic biofortification) offers a sustainable, cost-effective alternative to conventional supplementation and fortification programs. This is more likely to reach those most in need, has the added advantages of requiring no change in current consumer behaviour to be effective, and is transportable to a range of countries. Research by our group, along with studies elsewhere, has demonstrated conclusively that substantial genotypic variation exists in nutrient (e.g. Fe, Zn) and nutrient promotor (e.g. inulin) concentrations in wheat and other staple foods. A rapid screening technique has been developed for lutein content of wheat and triticale, and also for pro-vitamin A carotenoids in bread wheat. This will allow cost-effective screening of a wider range of genotypes that may reveal greater genotypic variation in these traits. Moreover, deeper understanding of genetic control mechanisms and development of molecular markers will facilitate breeding programs. We suggest that a combined strategy utilising plant breeding for higher micronutrient density; maximising the effects of nutritional promoters (e.g. inulin, vitamin C) by promoting favourable dietary combinations, as well as by plant breeding; and agronomic biofortification (e.g. adding iodide or iodate as fertiliser; applying selenate to cereal crops by spraying or adding to fertiliser) is likely to be the most effective way to improve the nutrition of populations. Furthermore, the importance of detecting and exploiting beneficial interactions is illustrated by our discovery that in Fe-deficient chickens, circulating Fe concentrations can be restored to normal levels by lutein supplementation. Further bioavailability/bioefficacy trials with animals and humans are needed, using varying dietary concentrations of Fe, Zn, carotenoids, inulin, Se and I to elucidate other important interactions in order to optimise delivery in biofortification programs.

The unique resistance and resilience of the Nigerian West African Dwarf goat to gastrointestinal nematode infections

PubMed Central

2011-01-01

Background West African Dwarf (WAD) goats serve an important role in the rural village economy of West Africa, especially among small-holder livestock owners. They have been shown to be trypanotolerant and to resist infections with Haemonchus contortus more effectively than any other known breed of goat. Methods In this paper we review what is known about the origins of this goat breed, explain its economic importance in rural West Africa and review the current status of our knowledge about its ability to resist parasitic infections. Conclusions We suggest that its unique capacity to show both trypanotolerance and resistance to gastrointestinal (GI) nematode infections is immunologically based and genetically endowed, and that knowledge of the underlying genes could be exploited to improve the capacity of more productive wool and milk producing, but GI nematode susceptible, breeds of goats to resist infection, without recourse to anthelmintics. Either conventional breeding allowing introgression of resistance alleles into susceptible breeds, or transgenesis could be exploited for this purpose. Appropriate legal protection of the resistance alleles of WAD goats might provide a much needed source of revenue for the countries in West Africa where the WAD goats exist and where currently living standards among rural populations are among the lowest in the world. PMID:21291550

SAR/multispectral image fusion for the detection of environmental hazards with a GIS

NASA Astrophysics Data System (ADS)

Errico, Angela; Angelino, Cesario Vincenzo; Cicala, Luca; Podobinski, Dominik P.; Persechino, Giuseppe; Ferrara, Claudia; Lega, Massimiliano; Vallario, Andrea; Parente, Claudio; Masi, Giuseppe; Gaetano, Raffaele; Scarpa, Giuseppe; Amitrano, Donato; Ruello, Giuseppe; Verdoliva, Luisa; Poggi, Giovanni

2014-10-01

In this paper we propose a GIS-based methodology, using optical and SAR remote sensing data, together with more conventional sources, for the detection of small cattle breeding areas, potentially responsible of hazardous littering. This specific environmental problem is very relevant for the Caserta area, in southern Italy, where many small buffalo breeding farms exist which are not even known to the productive activity register, and are not easily monitored and surveyed. Experiments on a test area, with available specific ground truth, prove that the proposed systems is characterized by very large detection probability and negligible false alarm rate.

Production performance, carcass composition, and adipose tissue traits of heavy pigs: influence of breed and production system.

PubMed

Lebret, B; Dourmad, J Y; Mourot, J; Pollet, P Y; Gondret, F

2014-08-01

Both breed and production systems are responsible for production efficiency and quality traits of pork. Effects of breed and production system within breed on growth, body fatness, and adipose tissues traits were assessed in the pure Basque (B, nonselected, local French) and conventional Large White (LW) breeds, reared either in a conventional (C, slatted floor), alternative (A, indoor straw bedding and outdoor area), or extensive (E, free range) system. A total of 100 castrated males were produced in 2 replicates, each involving 50 pigs distributed in 5 treatments based on breed and production system (i.e., BC, BA, BE, LWC, and LWA [10 pigs/group and per replicate]). From 35 kg BW to slaughter at around 145 kg BW, the BC, BA, LWC, and LWA pigs received the same growing and finishing diets, whereas the BE pigs had free access to the natural resources of the E pen and received a standard growing-finishing diet at restricted allowance according to the farming practices of the B pork chain. The B pigs had lower (P < 0.001) ADG and G:F than the LW pigs and were much older (P < 0.001) at slaughter. The LWA pigs had similar ADG but lower (P = 0.03) G:F than the LWC. Within the B breed, the BA had higher (P = 0.04) and the BE lower (P < 0.001) ADG compared with BC pigs. The B pigs had a higher (P < 0.001) carcass dressing an exhibited around 2-fold higher (P < 0.001) back fat proportion, perirenal fat weight and LM lipid content than the LW pigs. Compared with C, the A system decreased (P = 0.04) carcass dressing within LW but did not influence carcass traits within B pigs. The E system decreased (P ≤ 0.05) carcass dressing, back fat proportion, and LM lipid content in BE compared with BC pigs. The B pigs exhibited larger (P < 0.001) adipocytes in both subcutaneous adipose tissue (SCAT) and LM than the LW pigs. Malic enzyme activity was higher in SCAT of B than LW pigs despite their greater fatness, and was higher (P ≤ 0.01) in BA but lower (P < 0.001) in BE than in BC pigs. The B pigs had higher (P < 0.001) MUFA but lower (P ≤ 0.006) SFA and PUFA fatty acid percentages in SCAT than the LW pigs. Compared with C, the A system had scarce influence on FA composition within each breed, whereas the E system led to lower (P = 0.015) SFA and greater (P < 0.001) PUFA in SCAT of the B pigs. Altogether, the E production system can counteract the genetic potential of B pigs for growth rate but also body fatness.

Development of new techniques of using irradiation in the genetic improvement of warm season grasses and an assessment of the genetic and cytogenetic effects. Progress report, November 1, 1977--October 31, 1978. [Pearl millet, Bermuda-grass, and coastcross

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanna, W.W.; Burton, G.W.

1978-05-01

Progress is reported on plant breeding programs for the genetic improvement of warm season grasses using irradiation as a tool. Data are included from studies on alteration of the protein quantity and quality in pearl millet grain by irradiation and mutation breeding; the effects of nitrogen and genotype on pearl millet grain; the effects of seed size on quality in pearl millet; irradiation breeding of sterile triploid turf Bermuda grasses; irradiation breeding of sterile coastcross-1, a forage grass, to increase winter hardiness; use of irradiation to induce resistance to rust disease; and an economic assessment of irradiation-induced mutants for plantmore » breeding programs.« less

In vivo body composition in autochthonous and conventional pig breeding groups by dual-energy X-ray absorptiometry and magnetic resonance imaging under special consideration of Cerdo Ibérico.

PubMed

Kremer, P V; Fernández-Fígares, I; Förster, M; Scholz, A M

2012-12-01

The improvement of carcass quality is one of the main breeding goals in pig production. To select appropriate breeding animals, it is of major concern to exactly and reliably analyze the body composition in vivo. Therefore, the objective of the study was to examine whether the combination of dual-energy X-ray absorptiometry (DXA) and magnetic resonance imaging (MRI) offers the opportunity to reliably analyze quantitative and qualitative body composition characteristics of different pig breeding groups in vivo. In this study, a total of 77 pigs were studied by DXA and MRI at an average age of 154 days. The pigs originated from different autochthonous or conventional breeds or crossbreeds and were grouped into six breed types: Cerdo Ibérico (Ib); Duroc × Ib (Du_Ib); White Sow Lines (WSL, including German Landrace and German Large White); Hampshire/Pietrain (Pi_Ha, including Hampshire, Pietrain × Hampshire (PiHa) and Pietrain × PiHa); Pietrain/Duroc (Pi_Du, including Pietrain × Duroc (PiDu) and Pietrain × PiDu); crossbred WSL (PiDu_WSL, including Pietrain × WSL and PiDu × WSL). A whole-body scan was performed by DXA with a GE Lunar DPX-IQ in order to measure the amount and percentage of fat tissue (FM; %FM), lean tissue (LM; %LM) and bone mineral, whereas a Siemens Magnetom Open with a large body coil was used for MRI in the thorax region between 13th and 14th vertebrae in order to measure the area of the loin (LA) and the above back fat area (FA) of both body sides. A GLM procedure using SAS 9.2 was used to analyze the data. As expected, the native breed Ib followed by Du_Ib crossbreeds showed the highest %FM (27.2%, 25.0%) combined with the smallest LA (46.2 cm2, 73.6 cm2), whereas Ib had the lowest BW at an average age of 154 days. Pigs with Pi_Ha origin presented the least %FM (12.4%) and largest LA (99.5 cm2). The WSL and PiDu_WSL showed an intermediate body composition. Therefore, it could be concluded that DXA and MRI and especially their combination are very suitable methods to reliably identify differences in body composition and carcass traits among different pig lines in vivo.

Laboratory Animal Housing--Parts I and II.

ERIC Educational Resources Information Center

Runkle, Robert S.

1963-01-01

In recent years, the use of laboratory animals for bio-medical research has shown marked increase. Economic and efficient housing is a necessity. This two part report established guidelines for design and selection of materials for conventional animal housing. Contents include--(1) production and breeding facilities, (2) quarantine facilities, (3)…

Peach cultivar releases and fruit trait distribution in the USDA-ARS Byron program

USDA-ARS?s Scientific Manuscript database

Conventional plant breeding is often daunting and costly, but it has a long history of success and remains predominant in today’s crop improvement programs. Success depends on optimal combination of parents to produce sufficient hybrids, and comprehensive evaluation of the hybrids to select potentia...

Identification of QTLs controlling aroma volatiles using a 'Fortune' x 'Murcott' (Citrus reticulata) population

USDA-ARS?s Scientific Manuscript database

Flavor is an important attribute of mandarin (Citrus reticulata Blanco) and flavor improvement via conventional breeding is very challenging largely due to the complexity of the flavor components and traits. Many aroma associated volatiles of citrus fruit have been identified, which are directly rel...

50 CFR 23.7 - What office do I contact for CITES information?

Code of Federal Regulations, 2013 CFR

2013-10-01

... registered scientific institutions and operations breeding Appendix-I wildlife for commercial purposes; and... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...://www.fws.gov/permits (b) Scientific issues: (1) Animals and Plants Committees documents and issues (2...

50 CFR 23.26 - When is a U.S. or foreign CITES document valid?

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Registered commercial breeding operation for Appendix-I wildlife (i) The operation is included in the... document. (16) Registered commercial nursery for Appendix-I plants The operation is included in the... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.36 - What are the requirements for an export permit?

Code of Federal Regulations, 2013 CFR

2013-10-01

... Ginseng Appendix-I Plants Artificially Propagated for Commercial Purposes Biological Specimens Captive... noncommercial purposes. (See § 23.46 for the export of specimens that originated at a commercial breeding... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.36 - What are the requirements for an export permit?

Code of Federal Regulations, 2012 CFR

2012-10-01

... Ginseng Appendix-I Plants Artificially Propagated for Commercial Purposes Biological Specimens Captive... noncommercial purposes. (See § 23.46 for the export of specimens that originated at a commercial breeding... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.7 - What office do I contact for CITES information?

Code of Federal Regulations, 2014 CFR

2014-10-01

... registered scientific institutions and operations breeding Appendix-I wildlife for commercial purposes; and... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... and http://www.fws.gov/permits. (b) Scientific issues: (1) Animals and Plants Committees documents and...

50 CFR 23.7 - What office do I contact for CITES information?

Code of Federal Regulations, 2011 CFR

2011-10-01

... registered scientific institutions and operations breeding Appendix-I wildlife for commercial purposes; and... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...://www.fws.gov/permits (b) Scientific issues: (1) Animals and Plants Committees documents and issues (2...

50 CFR 23.26 - When is a U.S. or foreign CITES document valid?

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Registered commercial breeding operation for Appendix-I wildlife (i) The operation is included in the... document. (16) Registered commercial nursery for Appendix-I plants The operation is included in the... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.7 - What office do I contact for CITES information?

Code of Federal Regulations, 2012 CFR

2012-10-01

... registered scientific institutions and operations breeding Appendix-I wildlife for commercial purposes; and... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...://www.fws.gov/permits (b) Scientific issues: (1) Animals and Plants Committees documents and issues (2...

50 CFR 23.26 - When is a U.S. or foreign CITES document valid?

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Registered commercial breeding operation for Appendix-I wildlife (i) The operation is included in the... document. (16) Registered commercial nursery for Appendix-I plants The operation is included in the... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.7 - What office do I contact for CITES information?

Code of Federal Regulations, 2010 CFR

2010-10-01

... registered scientific institutions and operations breeding Appendix-I wildlife for commercial purposes; and... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...://www.fws.gov/permits (b) Scientific issues: (1) Animals and Plants Committees documents and issues (2...

50 CFR 23.36 - What are the requirements for an export permit?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Ginseng Appendix-I Plants Artificially Propagated for Commercial Purposes Biological Specimens Captive... noncommercial purposes. (See § 23.46 for the export of specimens that originated at a commercial breeding... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.27 - What CITES documents do I present at the port?

Code of Federal Regulations, 2014 CFR

2014-10-01

... Appendix-I commercial breeding operation, export permit Required Required Required Registered Appendix-I... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... presented. In the United States, for imports of CITES-listed plant specimens, CITES inspecting officials...

50 CFR 23.23 - What information is required on U.S. and foreign CITES documents?

Code of Federal Regulations, 2014 CFR

2014-10-01

... certificate for artificially propagated plants, certificate for wildlife bred in captivity, certificate of... for a registered commercial breeding operation or nursery for Appendix-I specimens (see § 23.46) The..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN...

50 CFR 23.26 - When is a U.S. or foreign CITES document valid?

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Registered commercial breeding operation for Appendix-I wildlife (i) The operation is included in the... document. (16) Registered commercial nursery for Appendix-I plants The operation is included in the... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.36 - What are the requirements for an export permit?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Ginseng Appendix-I Plants Artificially Propagated for Commercial Purposes Biological Specimens Captive... noncommercial purposes. (See § 23.46 for the export of specimens that originated at a commercial breeding... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

Genetic diversity in Gossypium hirsutum L. for cotton leaf curl disease in association with agronomic and fiber traits

USDA-ARS?s Scientific Manuscript database

Information of genetic diversity in germplasm for cotton leaf curl disease (CLCuD) resistance/susceptibility and economic characters is essential before starting a breeding program to development germplasm with disease resistance. In this study, 17 conventional cotton (Gossypium hirsutum L.) genoty...

Charge breeding simulations for radioactive ion beam production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Variale, V.; Raino, A. C.; Clauser, T.

2012-02-15

The charge breeding technique is used for radioactive ion beam (RIB) production in order of optimizing the re-acceleration of the radioactive element ions produced by a primary beam in a thick target. Charge breeding is achieved by means of a device capable of increasing the ion charge state from 1+ to a desired value n+. In order to get high intensity RIB, experiments with charge breeding of very high efficiency could be required. To reach this goal, the charge breeding simulation could help to optimize the high charge state production efficiency by finding more proper parameters for the radioactive 1+more » ions. In this paper a device based on an electron beam ion source (EBIS) is considered. In order to study that problem, a code already developed for studying the ion selective containment in an EBIS with RF quadrupoles, BRICTEST, has been modified to simulate the ion charge state breeding rate for different 1+ ion injection conditions. Particularly, the charge breeding simulations for an EBIS with a hollow electron beam have been studied.« less

Diversity of the TLR4 Immunity Receptor in Czech Native Cattle Breeds Revealed Using the Pacific Biosciences Sequencing Platform.

PubMed

Novák, Karel; Pikousová, Jitka; Czerneková, Vladimíra; Mátlová, Věra

2017-07-03

The allelic variants of immunity genes in historical breeds likely reflect local infection pressure and therefore represent a reservoir for breeding. Screening to determine the diversity of the Toll-like receptor gene TLR4 was conducted in two conserved cattle breeds: Czech Red and Czech Red Pied. High-throughput sequencing of pooled PCR amplicons using the PacBio platform revealed polymorphisms, which were subsequently confirmed via genotyping techniques. Eight SNPs found in coding and adjacent regions were grouped into 18 haplotypes, representing a significant portion of the known diversity in the global breed panel and presumably exceeding diversity in production populations. Notably, the ancient Czech Red breed appeared to possess greater haplotype diversity than the Czech Red Pied breed, a Simmental variant, although the haplotype frequencies might have been distorted by significant crossbreeding and bottlenecks in the history of Czech Red cattle. The differences in haplotype frequencies validated the phenotypic distinctness of the local breeds. Due to the availability of Czech Red Pied production herds, the effect of intensive breeding on TLR diversity can be evaluated in this model. The advantages of the Pacific Biosciences technology for the resequencing of long PCR fragments with subsequent direct phasing were independently validated.

An Attempt at Captive Breeding of the Endangered Newt Echinotriton andersoni, from the Central Ryukyus in Japan.

PubMed

Igawa, Takeshi; Sugawara, Hirotaka; Tado, Miyuki; Nishitani, Takuma; Kurabayashi, Atsushi; Islam, Mohammed Mafizul; Oumi, Shohei; Katsuren, Seiki; Fujii, Tamotsu; Sumida, Masayuki

2013-07-31

Anderson's crocodile newt (Echinotriton andersoni) is distributed in the Central Ryukyu Islands of southern Japan, but environmental degradation and illegal collection over the last several decades have devastated the local populations. It has therefore been listed as a class B1 endangered species in the IUCN Red List, indicating that it is at high risk of extinction in the wild. The species is also protected by law in both Okinawa and Kagoshima prefectures. An artificial insemination technique using hormonal injections could not be applied to the breeding of this species in the laboratory. In this study we naturally bred the species, and tested a laboratory farming technique using several male and female E. andersoni pairs collected from Okinawa, Amami, and Tokunoshima Islands and subsequently maintained in near-biotopic breeding cages. Among 378 eggs derived from 17 females, 319 (84.4%) became normal tailbud embryos, 274 (72.5%) hatched normally, 213 (56.3%) metamorphosed normally, and 141 (37.3%) became normal two-month-old newts; in addition, 77 one- to three-year-old Tokunoshima newts and 32 Amami larvae are currently still growing normally. Over the last five breeding seasons, eggs were laid in-cage on slopes near the waterfront. Larvae were raised in nets maintained in a temperature-controlled water bath at 20 °C and fed live Tubifex. Metamorphosed newts were transferred to plastic containers containing wet sponges kept in a temperature-controlled incubator at 22.5 °C and fed a cricket diet to promote healthy growth. This is the first published report of successfully propagating an endangered species by using breeding cages in a laboratory setting for captive breeding. Our findings on the natural breeding and raising of larvae and adults are useful in breeding this endangered species and can be applied to the preservation of other similarly wild and endangered species such as E. chinhaiensis.

Straight-line drift fences and pitfall traps

USGS Publications Warehouse

Corn, Paul Stephen

1994-01-01

Straight-line drift fences typically are short barriers (5-15 m) that direct animals traveling on the substrate surface into traps places at the ends of or beside the barriers. Traps (described below) can be pitfalls, funnel traps, or a combination of the two. Drift fences with pitfall or funnel traps and pitfall traps without fences are used commonly to inventory and monitor populations of amphibians and reptiles. For example, 9 of 17 field studies reported for management of terrestrial vertebrates (Sarzo et al. 1988) used these techniques to sample amphibians. Drift fences with pitfall traps can be used to determine species richness at a site and to detect the presence of rare species. They also can yield data on relative abundances and habitat use of selected species. Pitfall traps arrayed in a grid without fences can also be used to study the population ecology and habitat use of selected species. Population density can be estimated with this latter technique if used in conjunction with mark-recapture techniques (see Chapter 8). Drift fence arrays or pitfall grids can be left in place for long-term monitoring. In this section, I discuss the use of this technique to obtain data on amphibians away from breeding ponds. Use of drift fences and traps to monitory amphibian activity at breeding ponds is discussed in the section "Drift Fences Encircling Breeding Sits", below (technique 9). Some materials and procedures are common to both techniques. Investigators contemplating the use of drift fences and traps in any context should read both accounts.

Pflanzliche Zellkulturtechniken als Züchtungsschritt am Beispiel Raps

NASA Astrophysics Data System (ADS)

Hoffmann, Franz

1980-06-01

A supplementation of classical plant breeding is now necessary due to the limitations imposed by available genetic variability and the slowness of the method. Therefore, cell culture techniques could play an important role in the future. Using rape seed, in which plants derived from anther culture and in vitro mutagenesis are already field tested, it has been shown that, in this case, somatic genetics is very close to becoming a practical method. For most of the other crop plants, in particular the cereals, no such unconventional breeding techniques have yet been satisfactorily established for commercial use.

Improving industrial yeast strains: exploiting natural and artificial diversity

PubMed Central

Steensels, Jan; Snoek, Tim; Meersman, Esther; Nicolino, Martina Picca; Voordeckers, Karin; Verstrepen, Kevin J

2014-01-01

Yeasts have been used for thousands of years to make fermented foods and beverages, such as beer, wine, sake, and bread. However, the choice for a particular yeast strain or species for a specific industrial application is often based on historical, rather than scientific grounds. Moreover, new biotechnological yeast applications, such as the production of second-generation biofuels, confront yeast with environments and challenges that differ from those encountered in traditional food fermentations. Together, this implies that there are interesting opportunities to isolate or generate yeast variants that perform better than the currently used strains. Here, we discuss the different strategies of strain selection and improvement available for both conventional and nonconventional yeasts. Exploiting the existing natural diversity and using techniques such as mutagenesis, protoplast fusion, breeding, genome shuffling and directed evolution to generate artificial diversity, or the use of genetic modification strategies to alter traits in a more targeted way, have led to the selection of superior industrial yeasts. Furthermore, recent technological advances allowed the development of high-throughput techniques, such as ‘global transcription machinery engineering’ (gTME), to induce genetic variation, providing a new source of yeast genetic diversity. PMID:24724938

Factors affecting commercial application of embryo technologies in dairy cattle in Europe--a modelling approach.

PubMed

van Arendonk, Johan A M; Bijma, Piter

2003-01-15

Reproductive techniques have a major impact on the structure of breeding programmes, the rate of genetic gain and dissemination of genetic gain in populations. This manuscript reviews the impact of reproductive technologies on the underlying components of genetic gain and inbreeding with special reference to the role of female reproductive technology. Evaluation of alternative breeding schemes should be based on genetic gain while constraining inbreeding. Optimum breeding schemes can be characterised by: decreased importance of sib information; increased accuracy at the expense of intensity; and a factorial mating strategy. If large-scale embryo cloning becomes feasible, this will have a small impact on the rate of genetic gain but will have a large impact on the structure of breeding programmes.

50 CFR 23.62 - What factors are considered in making a finding of not for primarily commercial purposes?

Code of Federal Regulations, 2014 CFR

2014-10-01

... for breeding or artificial propagation is considered to be for primarily commercial purposes. As a... finding of not for primarily commercial purposes? 23.62 Section 23.62 Wildlife and Fisheries UNITED STATES..., SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON...

50 CFR 23.27 - What CITES documents do I present at the port?

Code of Federal Regulations, 2012 CFR

2012-10-01

... Registered Appendix-I commercial breeding operation, export permit Required Required Required Registered... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... wildlife in part 14 of this subchapter and for plants in part 24 of this subchapter and 7 CFR parts 319...

50 CFR 23.27 - What CITES documents do I present at the port?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Registered Appendix-I commercial breeding operation, export permit Required Required Required Registered... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... wildlife in part 14 of this subchapter and for plants in part 24 of this subchapter and 7 CFR parts 319...

50 CFR 23.27 - What CITES documents do I present at the port?

Code of Federal Regulations, 2013 CFR

2013-10-01

... Registered Appendix-I commercial breeding operation, export permit Required Required Required Registered... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... wildlife in part 14 of this subchapter and for plants in part 24 of this subchapter and 7 CFR parts 319...

50 CFR 23.62 - What factors are considered in making a finding of not for primarily commercial purposes?

Code of Federal Regulations, 2011 CFR

2011-10-01

... for breeding or artificial propagation is considered to be for primarily commercial purposes. As a... finding of not for primarily commercial purposes? 23.62 Section 23.62 Wildlife and Fisheries UNITED STATES..., SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON...

50 CFR 23.36 - What are the requirements for an export permit?

Code of Federal Regulations, 2014 CFR

2014-10-01

... Ginseng 3-200-34 Appendix-I Plants Artificially Propagated for Commercial Purposes 3-200-33 Biological... noncommercial purposes. (See § 23.46 for the export of specimens that originated at a commercial breeding... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD...

50 CFR 23.62 - What factors are considered in making a finding of not for primarily commercial purposes?

Code of Federal Regulations, 2010 CFR

2010-10-01

... for breeding or artificial propagation is considered to be for primarily commercial purposes. As a... finding of not for primarily commercial purposes? 23.62 Section 23.62 Wildlife and Fisheries UNITED STATES..., SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON...

50 CFR 23.62 - What factors are considered in making a finding of not for primarily commercial purposes?

Code of Federal Regulations, 2013 CFR

2013-10-01

... for breeding or artificial propagation is considered to be for primarily commercial purposes. As a... finding of not for primarily commercial purposes? 23.62 Section 23.62 Wildlife and Fisheries UNITED STATES..., SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON...

50 CFR 23.27 - What CITES documents do I present at the port?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Registered Appendix-I commercial breeding operation, export permit Required Required Required Registered... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN ENDANGERED SPECIES OF WILD... wildlife in part 14 of this subchapter and for plants in part 24 of this subchapter and 7 CFR parts 319...

50 CFR 23.62 - What factors are considered in making a finding of not for primarily commercial purposes?

Code of Federal Regulations, 2012 CFR

2012-10-01

... for breeding or artificial propagation is considered to be for primarily commercial purposes. As a... finding of not for primarily commercial purposes? 23.62 Section 23.62 Wildlife and Fisheries UNITED STATES..., SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON...

Selection of bean lines that combine resistance to web blight and common bacterial blight

USDA-ARS?s Scientific Manuscript database

Web blight caused by Thanatephorus cucumeris Frank (Donk) causes significant reductions in the yield and quality of beans produced in the humid, lowland tropics. A total of 644 lines from different breeding programs were evaluated for reaction to web blight and other diseases using conventional plan...

Bull fertility evaluations for Angus service sires bred to Holstein cows

USDA-ARS?s Scientific Manuscript database

Sire conception rate (SCR), a phenotypic evaluation of service-sire fertility implemented in August 2008, is based on data from the most recent 4 years, conventional-semen breedings up to 7 services, and cow parities 1 through 5. Many US dairy cows are now being bred to Angus sires because beef pric...

Accounting for genotype–by-environment interactions and non-additive genetic variation in genomic selection for water-soluble carbohydrate concentration in wheat

USDA-ARS?s Scientific Manuscript database

Abiotic stress tolerance traits are often complex and recalcitrant targets for conventional breeding improvement in many crop species. This study evaluated the potential of genomic selection to predict water-soluble carbohydrate concentration (WSCC), an important drought tolerance trait, in wheat un...

Assessment of long-term peach evaluation data reveals fruit trait distribution and selection tendencies

USDA-ARS?s Scientific Manuscript database

Conventional plant breeding has a long history of success. Although it is often a daunting job, it is still the most common approach used in today’s variety improvement programs. Efficient production of hybrids with potential for release as new varieties with desired traits relies on optimal selecti...

Haemonchotolerance in West African Dwarf goats: contribution to sustainable, anthelmintics-free helminth control in traditionally managed Nigerian dwarf goats.

PubMed

Chiejina, Samuel N; Behnke, Jerzy M; Fakae, Barineme B

2015-01-01

West African Dwarf (WAD) goats are extremely important in the rural village economy of West Africa, but still little is known about their biology, ecology and capacity to cope with gastrointestinal nematode (GIN) infections. Here, we summarise the history of this breed and explain its economic importance in rural West Africa. We review recent work showing that Nigerian WAD goats are highly trypanotolerant and resist infections with Haemonchus contortus more effectively than other breeds of domestic goat (haemonchotolerance). We believe that haemonchotolerance is largely responsible for the generally low level GIN infections and absence of clinical haemonchosis in WADs under field conditions, and has contributed to the relatively successful and sustainable, anthelmintics-free, small-scale system of goat husbandry in Nigeria's humid zone, and is immunologically based and genetically controlled. If haemonchotolerance can be shown to be genetically controlled, it should be possible to exploit the underlying genes to improve GIN resistance among productive fibre and milk producing breeds of goats, most of which are highly susceptible to nematode infections. Genetic resistance to GIN and trypanosome infections would obviate the need for expensive chemotherapy, mostly unaffordable to small-holder farmers in Africa, and a significant cost of goat husbandry in more developed countries. Either introgression of resistance alleles into susceptible breeds by conventional breeding, or transgenesis could be used to develop novel parasite-resistant, but highly productive breeds, or to improve the resistance of existing breeds, benefitting the local West African rural economy as well as global caprine livestock agriculture. © S.N. Chiejina et al., published by EDP Sciences, 2015.

Plant breeding can be made more efficient by having fewer, better crosses.

PubMed

Witcombe, John R; Gyawali, Sanjaya; Subedi, Madhu; Virk, Daljit S; Joshi, Krishna D

2013-02-07

Crop yields have to increase to provide food security for the world's growing population. To achieve these yield increases there will have to be a significant contribution from genetic gains made by conventional plant breeding. However, the breeding process is not efficient because crosses made between parental combinations that fail to produce useful varieties consume over 99% of the resources. We tested in a rice-breeding programme if its efficiency could be improved by using many fewer, but more judiciously chosen crosses than usual. In a 15-year programme in Nepal, with varietal testing also in India and Bangladesh, we made only six crosses that were stringently chosen on complementary parental performance. We evaluated their success by the adoption and official release of the varieties they produced. We then modelled optimum cross number using assumptions based on our experimental results.Four of the six crosses succeeded. This was a fifty-fold improvement over breeding programmes that employ many crosses where only about one, or fewer, crosses in 200 succeed. Based on these results, we modelled the optimum number of crosses by assuming there would be a decline in the reliability of the breeder's prediction of the value of each cross as more crosses were made (because there is progressively less information on the traits of the parents). Fewer-cross programmes were more likely to succeed and did so using fewer resources. Making more crosses reduced the overall probability of success of the breeding programme. The efficiency of national and international breeding programmes would be increased by making fewer crosses among more carefully chosen parents. This would increase the number of higher yielding varieties that are delivered to farmers and hence help to improve food security.

Plant breeding can be made more efficient by having fewer, better crosses

PubMed Central

2013-01-01

Background Crop yields have to increase to provide food security for the world’s growing population. To achieve these yield increases there will have to be a significant contribution from genetic gains made by conventional plant breeding. However, the breeding process is not efficient because crosses made between parental combinations that fail to produce useful varieties consume over 99% of the resources. Results We tested in a rice-breeding programme if its efficiency could be improved by using many fewer, but more judiciously chosen crosses than usual. In a 15-year programme in Nepal, with varietal testing also in India and Bangladesh, we made only six crosses that were stringently chosen on complementary parental performance. We evaluated their success by the adoption and official release of the varieties they produced. We then modelled optimum cross number using assumptions based on our experimental results. Four of the six crosses succeeded. This was a fifty-fold improvement over breeding programmes that employ many crosses where only about one, or fewer, crosses in 200 succeed. Based on these results, we modelled the optimum number of crosses by assuming there would be a decline in the reliability of the breeder’s prediction of the value of each cross as more crosses were made (because there is progressively less information on the traits of the parents). Fewer-cross programmes were more likely to succeed and did so using fewer resources. Making more crosses reduced the overall probability of success of the breeding programme. Conclusions The efficiency of national and international breeding programmes would be increased by making fewer crosses among more carefully chosen parents. This would increase the number of higher yielding varieties that are delivered to farmers and hence help to improve food security. PMID:23391262

Breeding to adapt agriculture to climate change: affordable phenotyping solutions.

PubMed

Araus, José L; Kefauver, Shawn C

2018-05-28

Breeding is one of the central pillars of adaptation of crops to climate change. However, phenotyping is a key bottleneck that is limiting breeding efficiency. The awareness of phenotyping as a breeding limitation is not only sustained by the lack of adequate approaches, but also by the perception that phenotyping is an expensive activity. Phenotyping is not just dependent on the choice of appropriate traits and tools (e.g. sensors) but relies on how these tools are deployed on their carrying platforms, the speed and volume of data extraction and analysis (throughput), the handling of spatial variability and characterization of environmental conditions, and finally how all the information is integrated and processed. Affordable high throughput phenotyping aims to achieve reasonably priced solutions for all the components comprising the phenotyping pipeline. This mini-review will cover current and imminent solutions for all these components, from the increasing use of conventional digital RGB cameras, within the category of sensors, to open-access cloud-structured data processing and the use of smartphones. Emphasis will be placed on field phenotyping, which is really the main application for day-to-day phenotyping. Copyright © 2018 Elsevier Ltd. All rights reserved.

New Breed of Mice May Improve Accuracy for Preclinical Testing of Cancer Drugs | Poster

Cancer.gov

A new breed of lab animals, dubbed “glowing head mice,” may do a better job than conventional mice in predicting the success of experimental cancer drugs—while also helping to meet an urgent need for more realistic preclinical animal models. The mice were developed to tolerate often-used light-emitting molecules, such as luciferase from fireflies and green fluorescent protein (GFP) from jellyfish. These “optical reporters” are useful for monitoring the effect of experimental therapies in live animals over time because they emit an immediate and easily detected light signal showing whether a tumor inside the animal’s body is shrinking as desired.

A research program for the socioeconomic impacts of gene editing regulation

PubMed Central

Whelan, Agustina I.; Lema, Martin A.

2017-01-01

ABSTRACT Gene editing technologies are a group of recent innovations in plant breeding using molecular biology, which have in common the capability of introducing a site-directed mutation or deletion in the genome. The first cases of crops improved with these technologies are approaching the market; this has raised an international debate regarding if they should be regulated as genetically modified crops or just as another form of mutagenesis under conventional breeding. This dilemma for policymakers not only entails issues pertaining safety information and legal/regulatory definitions. It also demands borrowing tools developed in the field of social studies of science and technology, as an additional basis for sound decision making. PMID:28080208

A research program for the socioeconomic impacts of gene editing regulation.

PubMed

Whelan, Agustina I; Lema, Martin A

2017-01-02

Gene editing technologies are a group of recent innovations in plant breeding using molecular biology, which have in common the capability of introducing a site-directed mutation or deletion in the genome. The first cases of crops improved with these technologies are approaching the market; this has raised an international debate regarding if they should be regulated as genetically modified crops or just as another form of mutagenesis under conventional breeding. This dilemma for policymakers not only entails issues pertaining safety information and legal/regulatory definitions. It also demands borrowing tools developed in the field of social studies of science and technology, as an additional basis for sound decision making.

Feasibility of semen collection in red-winged tinamou (Rhynchotus rufescens) by manual stimulation and sazonality implications.

PubMed

Paranzini, Cristiane Sella; Correia, Luiz Eduardo Cruz Dos Santos; de Camargo, Laiza Sartori; Silva, Kelry Mayara; de França, Tatyana Mendes; Silva, Josineudson Augusto de Vasconcelos; Veiga, Nabor; de Souza, Fabiana Ferreira

2018-02-01

This study aimed to report in detail, the technique and challenges of cloacal massage, to collect and evaluate semen from red-winged tinamou (Rhynchotus rufescens) keep in captivity, performed by only one technician. Sixty-four semen collection attempts, from 16 adult males, during breeding season and 16 attempts form these same 16 males in non-breeding season, were performed. Prior to collection, all animals were conditioned to cloacal massage for 6 weeks and the ejaculates were succeed with viable spermatozoa and then, evaluated for feces, urine and mucus contamination, volume, concentration, sperm vigor, motility, morphological defects and acrosome integrity. Semen collection success rate was 63% in breeding season and 2 (5%) samples were discarded by grade 5 contamination. Only 3 ejaculates from 16 tinamou were obtained in non-breeding season. Sperm concentration and acrosome integrity was higher (p = 0.00) in breeding season, and the percentage of total sperm morphological defects, were high in both in breeding and out breeding season. Overall, we concluded that the red-winged tinamou breeding season, is linked to photoperiod (spring and summer), and at this period time, semen can be obtained by cloacal massage collection satisfactorily, allowing its use in reproduction biotechnologies and sperm cryopreservation. Copyright © 2017 Elsevier Inc. All rights reserved.

Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

PubMed

Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

2013-01-01

Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.

Interplay between heritability, genetic correlation and economic weighting in a selection index with and without genomic information.

PubMed

Haberland, A M; Pimentel, E C G; Ytournel, F; Erbe, M; Simianer, H

2013-12-01

The availability of genomic information demands proper evaluation on how the kind (phenotypic versus genomic) and the amount of information influences the interplay of heritability (h(2)), genetic correlation (r(GiGj)) and economic weighting of traits with regard to the standard deviation of the index (σI). As σI is directly proportional to response to selection, it was the chosen parameter for comparing the indices. Three selection indices incorporating conventional and genomic information for a two trait (i and j) breeding goal were compared. Information sources were chosen corresponding to pig breeding applications. Index I incorporating an own performance in trait j served as reference scenario. In index II, additional information in both traits was contributed by a varying number of full-sibs (2, 7, 50). In index III, the conventional own performance in trait j was combined with genomic information for both traits. The number of animals in the reference population (NP = 1000, 5000, 10,000) and thus the accuracy of GBVs were varied. With more information included in the index, σI became more independent of r(GiGj), h(j)(2) and relative economic weighting. This applied for index II (more full-sibs) and for index III (more accurate GBVs). Standard deviations of index II with seven full-sibs and index III with NP = 1000 were similar when both traits had the same heritability. If the heritability of trait j was reduced (h(j)(2) = 0.1), σI of index III with NP = 1000 was clearly higher than for index II with seven full-sibs. When enhancing the relative economic weight of trait j, the decrease in σI of the conventional full-sib index was much stronger than for index III. Our results imply that NP = 1000 can be considered a minimum size for a reference population in pig breeding. These conclusions also hold for comparing the accuracies of the indices. © 2013 Blackwell Verlag GmbH.

Crop improvement and conservation through tissue culture techniques

USDA-ARS?s Scientific Manuscript database

Crop improvement through classic breeding and/or genetic engineering methods is possible in the majority of cultivated crops. However, gene manipulations, chromosome duplication, protoplast fusion, bioassays, interspecific cross recovery involve tissue culture techniques. For vegetatively propagated...

Assignment of the SLA alleles and reproductive potential of selective breeding Duroc pig lines.

PubMed

Soe, Ok Kar; Ohba, Yasunori; Imaeda, Noriaki; Nishii, Naohito; Takasu, Masaki; Yoshioka, Gou; Kawata, Hisako; Shigenari, Atsuko; Uenishi, Hirohide; Inoko, Hidetoshi; Ando, Asako; Kitagawa, Hitoshi

2008-01-01

Pigs with defined swine leukocyte antigen (SLA) haplotypes and their detailed information are useful for transplantation and immunological studies. We developed two herds of SLA homozygous Duroc pigs with novel SLA haplotypes and characterized their reproductive potential. For selective inbreeding, a pair of Duroc pigs was chosen as initial breeders, and substantial breeding within progenies was carried out for eight generations. In the selective breeding Duroc pigs, SLA haplotypes were assigned by nucleotide sequence determination of reverse transcription polymerase chain reaction (RT-PCR) products of three SLA classical class I genes and two class II genes. Based on this sequence information, we developed a rapid and simple SLA class II DNA typing method by polymerase chain reaction-sequence specific primer (PCR-SSP) technique. As a complementary method for the characterization of the SLA haplotypes, genetic polymorphisms of 36 microsatellite (MS) markers within the SLA region were also analyzed in the selective breeding pigs with SLA homozygous/heterozygous haplotypes. Among the selective breeding pigs from the third to fifth generations, only two SLA haplotypes were identified by the RT-PCR based SLA typing method; Hp-27.30 (SLA-1*08an03, SLA-1*06an04, SLA-2*0102, SLA-3*0101 DRB1*1101 and DQB1*0503) and Hp-60.13 (SLA-1*an02, SLA-2*1002, SLA-3*0502, DRB1*0403 and DQB1*0303). In these two SLA haplotypes, two class I haplotypes, Hp-27.0 and Hp-60.0, are novel. Furthermore, two class II haplotypes, Hp-0.30 and Hp-0.13, which were previously reported in Korean native pigs and pigs of Hanford breed, respectively, were also assigned by a simple assay using a PCR-SSP technique in the entire selective breeding stock. Moreover, two haplotype specific MS patterns were observed across the entire SLA region in the selective breeding (homozygous/heterozygous) pigs. No morphological abnormalities were observed in selective breeding pigs. The theoretical inbreeding coefficient at the eighth generation was 78.5%. In all generations of selective breeding pigs, litter sizes were comparable and weaning weights from the fifth to eighth generation produced progenies significantly lighter (P < 0.01) than those in the non-selective breeding pigs. We established and characterized SLA homozygous Duroc herds with two kinds of haplotypes that can be used as a new resource for transplantation and other biomedical studies.

Analysis on economic carrying capacity index of pig breeding in China

NASA Astrophysics Data System (ADS)

Leng, Bi-Bin; Liu, Jia-Ling; Xu, Yue-Feng

2017-08-01

In this paper, factor analysis method was employed to analyze and calculate the Gross Domestic Product (GDP) per capita in the last decade, the proportion of research and experiment development (R&D) expenditure equivalent to GDP, urban and rural residents’ pork consumption and explored the scale of Chinese pig breeding on economic carrying capacity index. The result showed that the growth of GDP had led to better techniques and higher field investment, and stronger support like science and technology from the government provided good conditions for large scale of pig breeding. Besides, the substantial increase of pork consumption between rural and urban residents has contributed to the pig breeding in large scale. As a result, the economic carrying capacity index in Chinese pig farming is on the rise.

Multiple ovarian transplants to rescue a transgenic line of mice.

PubMed

Dawes, Joyce; Liu, Bowen; Mars, Wendy; Michalopoulos, George; Khillan, Jaspal S

2010-06-01

Transgenic mice are useful tools for studying gene function and regulation but can be difficult to successfully breed. To 'rescue' transgenic lines that are difficult to propagate, researchers use a variety of techniques. One method is ovarian transplant, in which researchers remove ovaries from a donor transgenic mouse, cryopreserve the ovarian tissue, transplant this tissue into histocompatible female mice and breed these recipient females. Though it is a useful technique, cryopreservation can potentially damage ovarian tissue, which could reduce fertility. In this article, the authors describe how they carried out ovarian transplants without cryopreservation to rescue a line of transgenic C57BL/6 mice. Other researchers who have experience with mouse reproductive surgery should be able to use this technique to rescue infertile transgenic lines of mice.

Genome-wide prediction models that incorporate de novo GWAS are a powerful new tool for tropical rice improvement

PubMed Central

Spindel, J E; Begum, H; Akdemir, D; Collard, B; Redoña, E; Jannink, J-L; McCouch, S

2016-01-01

To address the multiple challenges to food security posed by global climate change, population growth and rising incomes, plant breeders are developing new crop varieties that can enhance both agricultural productivity and environmental sustainability. Current breeding practices, however, are unable to keep pace with demand. Genomic selection (GS) is a new technique that helps accelerate the rate of genetic gain in breeding by using whole-genome data to predict the breeding value of offspring. Here, we describe a new GS model that combines RR-BLUP with markers fit as fixed effects selected from the results of a genome-wide-association study (GWAS) on the RR-BLUP training data. We term this model GS + de novo GWAS. In a breeding population of tropical rice, GS + de novo GWAS outperformed six other models for a variety of traits and in multiple environments. On the basis of these results, we propose an extended, two-part breeding design that can be used to efficiently integrate novel variation into elite breeding populations, thus expanding genetic diversity and enhancing the potential for sustainable productivity gains. PMID:26860200

Development of methods for cryopreservation of rooster sperm from the endangered breed "Gallina Valenciana de Chulilla" using low glycerol concentrations.

PubMed

Blanch, E; Tomás, C; Casares, L; Gómez, E A; Sansano, S; Giménez, I; Mocé, E

2014-06-01

Glycerol (11%; v:v) is the cryoprotectant most often used for the cryopreservation of rooster sperm. However, chicken breeds differ in the resistance of their sperm to the cryopreservation process and endangered or local breeds usually present low fertilizing ability when conventional sperm cryopreservation protocols are used. The objective of this study was to optimize the protocol for the cryopreservation of the sperm from the endangered breed "Gallina Valenciana de Chulilla". For this purpose, 10 pools of semen from 43 roosters of this breed were cryopreserved using 8%, 7%, 6%, or 4% glycerol, and the sperm quality was determined immediately after thawing and in the insemination doses. Lohmann Brown Classic laying hens (n = 40) were used for the insemination trials. The sperm quality after cryopreservation progressively decreased as the glycerol concentration was reduced (P < 0.01); samples frozen using 4% glycerol exhibited the lowest quality (38% total motile sperm and 49% live sperm), and samples frozen using 8% glycerol exhibited the highest quality (67% total motile sperm and 66% live sperm). These differences were also observed after the glycerol was removed (P < 0.01). However, the sperm fertilizing ability was similar for all the treatments (23%-30% fertilized eggs), and increased as the glycerol concentration decreased. In conclusion, semen from roosters frozen using 4% glycerol exhibited lower sperm quality but similar fertilizing ability compared with samples processed using higher glycerol concentrations. These results may provide useful information for developing cryopreservation protocols for other breeds. Copyright © 2014 Elsevier Inc. All rights reserved.

Identifying a breeding habitat of a critically endangered fish, Acheilognathus typus, in a natural river in Japan

NASA Astrophysics Data System (ADS)

Sakata, Masayuki K.; Maki, Nobutaka; Sugiyama, Hideki; Minamoto, Toshifumi

2017-12-01

Freshwater biodiversity has been severely threatened in recent years, and to conserve endangered species, their distribution and breeding habitats need to be clarified. However, identifying breeding sites in a large area is generally difficult. Here, by combining the emerging environmental DNA (eDNA) analysis with subsequent traditional collection surveys, we successfully identified a breeding habitat for the critically endangered freshwater fish Acheilognathus typus in the mainstream of Omono River in Akita Prefecture, Japan, which is one of the original habitats of this species. Based on DNA cytochrome B sequences of A. typus and closely related species, we developed species-specific primers and a probe that were used in real-time PCR for detecting A. typus eDNA. After verifying the specificity and applicability of the primers and probe on water samples from known artificial habitats, eDNA analysis was applied to water samples collected at 99 sites along Omono River. Two of the samples were positive for A. typus eDNA, and thus, small fixed nets and bottle traps were set out to capture adult fish and verify egg deposition in bivalves (the preferred breeding substrate for A. typus) in the corresponding regions. Mature female and male individuals and bivalves containing laid eggs were collected at one of the eDNA-positive sites. This was the first record of adult A. typus in Omono River in 11 years. This study highlights the value of eDNA analysis to guide conventional monitoring surveys and shows that combining both methods can provide important information on breeding sites that is essential for species' conservation.

Translating knowledge about abiotic stress tolerance to breeding programmes.

PubMed

Gilliham, Matthew; Able, Jason A; Roy, Stuart J

2017-06-01

Plant breeding and improvements in agronomic practice are making a consistent contribution to increasing global crop production year upon year. However, the rate of yield improvement currently lags behind the targets set to produce enough food to meet the demands of the predicted global population in 2050. Furthermore, crops that are exposed to harmful abiotic environmental factors (abiotic stresses, e.g. water limitation, salinity, extreme temperature) are prone to reduced yields. Here, we briefly describe the processes undertaken in conventional breeding programmes, which are usually designed to improve yields in near-optimal conditions rather than specifically breeding for improved crop yield stability under stressed conditions. While there is extensive fundamental research activity that examines mechanisms of plant stress tolerance, there are few examples that apply this research to improving commercial crop yields. There are notable exceptions, and we highlight some of these to demonstrate the magnitude of yield gains that could be made by translating agronomic, phenological and genetic solutions focused on improving or mitigating the effect of abiotic stress in the field; in particular, we focus on improvements in crop water-use efficiency and salinity tolerance. We speculate upon the reasons for the disconnect between research and research translation. We conclude that to realise untapped rapid gains towards food security targets new funding structures need to be embraced. Such funding needs to serve both the core and collaborative activities of the fundamental, pre-breeding and breeding research communities in order to expedite the translation of innovative research into the fields of primary producers. © 2016 The Authors The Plant Journal © 2016 John Wiley & Sons Ltd.

Identifying a breeding habitat of a critically endangered fish, Acheilognathus typus, in a natural river in Japan.

PubMed

Sakata, Masayuki K; Maki, Nobutaka; Sugiyama, Hideki; Minamoto, Toshifumi

2017-11-14

Freshwater biodiversity has been severely threatened in recent years, and to conserve endangered species, their distribution and breeding habitats need to be clarified. However, identifying breeding sites in a large area is generally difficult. Here, by combining the emerging environmental DNA (eDNA) analysis with subsequent traditional collection surveys, we successfully identified a breeding habitat for the critically endangered freshwater fish Acheilognathus typus in the mainstream of Omono River in Akita Prefecture, Japan, which is one of the original habitats of this species. Based on DNA cytochrome B sequences of A. typus and closely related species, we developed species-specific primers and a probe that were used in real-time PCR for detecting A. typus eDNA. After verifying the specificity and applicability of the primers and probe on water samples from known artificial habitats, eDNA analysis was applied to water samples collected at 99 sites along Omono River. Two of the samples were positive for A. typus eDNA, and thus, small fixed nets and bottle traps were set out to capture adult fish and verify egg deposition in bivalves (the preferred breeding substrate for A. typus) in the corresponding regions. Mature female and male individuals and bivalves containing laid eggs were collected at one of the eDNA-positive sites. This was the first record of adult A. typus in Omono River in 11 years. This study highlights the value of eDNA analysis to guide conventional monitoring surveys and shows that combining both methods can provide important information on breeding sites that is essential for species' conservation.

Sensitivity of breeding parameters to food supply in Black-legged Kittiwakes Rissa tridactyla

USGS Publications Warehouse

Gill, Verena A.; Hatch, Scott A.; Lanctot, Richard B.

2002-01-01

We fed Herring Clupea pallasi to pairs of Black-legged Kittiwakes Rissa tridactyla throughout the breeding season in two years at a colony in the northern Gulf of Alaska. We measured responses to supplemental feeding in a wide array of breeding parameters to gauge their relative sensitivity to food supply, and thus their potential as indicators of natural foraging conditions. Conventional measures of success (hatching, fledging and overall productivity) were more effective as indicators of food supply than behavioural attributes such as courtship feeding, chick provisioning rates and sibling aggression. However, behaviour such as nest relief during incubation and adult attendance with older chicks were also highly responsive to supplemental food and may be useful for monitoring environmental conditions in studies of shorter duration. On average, the chick-rearing stage contained more sensitive indicators of food availability than prelaying or incubation stages. Overall, rates of hatching and fledging success, and the mean duration of incubation shifts were the most food-sensitive parameters studied.

Enhancement Of Glucosinolate and Isothiocyanate Profiles in Brassicaceae Crops: Addressing Challenges in Breeding for Cultivation, Storage, and Consumer-Related Traits.

PubMed

Bell, Luke; Wagstaff, Carol

2017-11-01

Glucosinolates (GSLs) and isothiocyanates (ITCs) produced by Brassicaceae plants are popular targets for analysis due to the health benefits associated with them. Breeders aim to increase the concentrations in commercial varieties; however, there are few examples of this. The most well-known is Beneforté broccoli, which has increased glucoraphanin/sulforaphane concentrations compared to those of conventional varieties. It was developed through traditional breeding methods with considerations for processing, consumption, and health made throughout this process. Many studies presented in the literature do not take a holistic approach, and key points about breeding, cultivation methods, postharvest storage, sensory attributes, and consumer preferences are not properly taken into account. In this review, we draw together data for multiple species and address how such factors can influence GSL profiles. We encourage researchers and institutions to engage with industry and consumers to produce research that can be utilized in the improvement of Brassicaceae crops.

Development of innovative technique that may be used as models for the increase of biomass production with grasses and other species

NASA Astrophysics Data System (ADS)

Burton, G. W.; Hanna, W. W.

1981-09-01

Techniques for biomass increase are discussed: irradiation breeding of sterile triploid turf bermuda grasses; irradiation breeding of sterile Coastcross-1, a forage grass hybrid to increase winter hardiness; heterosis resulting from crossing specific irradiation induced mutants with their normal inbred parent; use of mitomycin and streptomycin to create cytoplasmic male sterile mutants in pearl millet; biomass of napiergrass; evaluation of mutagen induced lignin mutants to maximize metabolizable energy in sorghum; interspecific crosses in Pennisetum; production of homozygous translocation tester stocks; use of radiation to induce and transfer reproductive behavior in plants; and genetics of radiation induced mutations.

Overview of the Wheat Genetic Transformation and Breeding Status in China.

PubMed

Han, Jiapeng; Yu, Xiaofen; Chang, Junli; Yang, Guangxiao; He, Guangyuan

2017-01-01

In the past two decades, Chinese scientists have achieved significant progress on three aspects of wheat genetic transformation. First, the wheat transformation platform has been established and optimized to improve the transformation efficiency, shorten the time required from starting of transformation procedure to the fertile transgenic wheat plants obtained as well as to overcome the problem of genotype-dependent for wheat genetic transformation in wide range of wheat elite varieties. Second, with the help of many emerging techniques such as CRISPR/cas9 function of over 100 wheat genes has been investigated. Finally, modern technology has been combined with the traditional breeding technique such as crossing to accelerate the application of wheat transformation. Overall, the wheat end-use quality and the characteristics of wheat stress tolerance have been improved by wheat genetic engineering technique. So far, wheat transgenic lines integrated with quality-improved genes and stress tolerant genes have been on the way of Production Test stage in the field. The debates and the future studies on wheat transformation have been discussed, and the brief summary of Chinese wheat breeding research history has also been provided in this review.

Potential benefits of genomic selection on genetic gain of small ruminant breeding programs.

PubMed

Shumbusho, F; Raoul, J; Astruc, J M; Palhiere, I; Elsen, J M

2013-08-01

In conventional small ruminant breeding programs, only pedigree and phenotype records are used to make selection decisions but prospects of including genomic information are now under consideration. The objective of this study was to assess the potential benefits of genomic selection on the genetic gain in French sheep and goat breeding designs of today. Traditional and genomic scenarios were modeled with deterministic methods for 3 breeding programs. The models included decisional variables related to male selection candidates, progeny testing capacity, and economic weights that were optimized to maximize annual genetic gain (AGG) of i) a meat sheep breeding program that improved a meat trait of heritability (h(2)) = 0.30 and a maternal trait of h(2) = 0.09 and ii) dairy sheep and goat breeding programs that improved a milk trait of h(2) = 0.30. Values of ±0.20 of genetic correlation between meat and maternal traits were considered to study their effects on AGG. The Bulmer effect was accounted for and the results presented here are the averages of AGG after 10 generations of selection. Results showed that current traditional breeding programs provide an AGG of 0.095 genetic standard deviation (σa) for meat and 0.061 σa for maternal trait in meat breed and 0.147 σa and 0.120 σa in sheep and goat dairy breeds, respectively. By optimizing decisional variables, the AGG with traditional selection methods increased to 0.139 σa for meat and 0.096 σa for maternal traits in meat breeding programs and to 0.174 σa and 0.183 σa in dairy sheep and goat breeding programs, respectively. With a medium-sized reference population (nref) of 2,000 individuals, the best genomic scenarios gave an AGG that was 17.9% greater than with traditional selection methods with optimized values of decisional variables for combined meat and maternal traits in meat sheep, 51.7% in dairy sheep, and 26.2% in dairy goats. The superiority of genomic schemes increased with the size of the reference population and genomic selection gave the best results when nref > 1,000 individuals for dairy breeds and nref > 2,000 individuals for meat breed. Genetic correlation between meat and maternal traits had a large impact on the genetic gain of both traits. Changes in AGG due to correlation were greatest for low heritable maternal traits. As a general rule, AGG was increased both by optimizing selection designs and including genomic information.

Effectiveness of a detached‐leaf assay as a proxy for stem inoculations in backcrossed chestnut (Castanea) blight resistance breeding populations

Treesearch

N. R. LaBonte; J.R. McKenna; K. Woeste

2016-01-01

A recently developed detached-leaf blight resistance assay has generated interest because it could reduce the amount of time needed to evaluate backcrossed hybrid trees in the American chestnut blight resistance breeding programme. We evaluated the leaf inoculation technique on a sample of advanced progeny from the Indiana state chapter American Chestnut Foundation...

Using the choice experiment method in the design of breeding goals in dairy sheep.

PubMed

Ragkos, A; Abas, Z

2015-02-01

Market failures are the main cause of poor acknowledgement of the true impact of functional sheep traits on the management and economic performance of farms, which results in their omission from the breeding goal or the estimation of non-representative economic weights in the breeding goal. Consequently, stated-preference non-market valuation techniques, which recently emerged to mitigate these problems, are necessary to estimate economic weights for functional traits. The purpose of this paper is to present an example of the use of a choice experiment (CE) in the estimation of economic weights for sheep traits for the design of breeding goals. Through a questionnaire survey the preferences of sheep farmers are recorded and their marginal willingness to pay (MWTP) for 10 production and functional traits is estimated. Data are analysed using random parameter logit models. The results reveal unobserved preference heterogeneity for fertility, adaptability to grazing and resistance to disease, thus highlighting that these traits are appreciated differently by farmers, because their needs are diverse. Positive MWTP is found for Greek breeds, high milk production and lambs with low fat deposition, for which there is high demand in Greek markets. On the other hand, MWTP for the cheese-making ability of milk is negative, stemming from the fact that sheep milk prices in Greece are not formulated according to milk composition. In addition, farmers seem to understand differences between udder shapes and attribute different values to various types. This application of the CE method indicates that communication channels among farmers and breeders should be established in order to enhance market performance and to provide orientation to the design of breeding programmes. Non-market valuation can be used complementarily to market valuation techniques, in order to provide accurate estimates for production and functional traits.

The influence of feed and herd on fatty acid composition in 3 dairy breeds (Danish Holstein, Danish Jersey, and Swedish Red).

PubMed

Poulsen, N A; Gustavsson, F; Glantz, M; Paulsson, M; Larsen, L B; Larsen, M K

2012-11-01

The composition of milk fat from dairy cows is related to both genetic and environmental factors. Here, the effect of feed and herd was examined in 3 Scandinavian breeds, namely Danish Holstein-Friesian (DH), Danish Jersey (DJ), and Swedish Red (SR). In total, milk samples from 1,298 cows kept in indoor housing systems were collected from 61 conventional dairy herds in Denmark and Sweden. The fatty acid (FA) composition of milk was determined by gas chromatography and the content of α-tocopherol by HPLC. Based on the 17 individual FA determined, distinct FA profiles were observed for all breeds using univariate and multivariate statistics. The DJ cows were characterized by higher levels of saturated short-chain FA; in contrast, DH cows had higher content of unsaturated C18 FA, whereas higher levels of primarily C14:0, C14:1, C18:1 cis-9, and C18:3n-3 were evident in SR cows. This variation in milk fat composition across breeds was further reflected in different desaturase indices, which were generally higher in SR cows. In addition, α-tocopherol differed significantly among breeds, with DJ cows having the highest content. Herd-specific feeding plans were collected, and different feed items were separated into 4 broad feed categories, including grass products, maize silage, grain, and concentrate. The pronounced differences in overall feed composition among breeds were, to a large extent, due to regional differences between countries, with SR receiving higher levels of grain and grass silage compared with the Danish breeds. Within breeds, differences in feeding regimens among herds were furthermore higher in SR. Significant correlations between feed category and individual FA were observed in all breeds. Furthermore, variance components were estimated and used to determine the proportion of phenotypic variation that could be explained by herd. The herd effect for individual FA was generally lower for DH compared with the 2 other breeds. In addition, very low herd effects were shown for C14:1 and C16:1 in all breeds, suggesting that the content of these FA is mainly genetically regulated. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The Geographic Information System applied to study schistosomiasis in Pernambuco

PubMed Central

Barbosa, Verônica Santos; Loyo, Rodrigo Moraes; Guimarães, Ricardo José de Paula Souza e; Barbosa, Constança Simões

2017-01-01

ABSTRACT OBJECTIVE Diagnose risk environments for schistosomiasis in coastal localities of Pernambuco using geoprocessing techniques. METHODS A coproscopic and malacological survey were carried out in the Forte Orange and Serrambi areas. Environmental variables (temperature, salinity, pH, total dissolved solids and water fecal coliform dosage) were collected from Biomphalaria breeding sites or foci. The spatial analysis was performed using ArcGis 10.1 software, applying the kernel estimator, elevation map, and distance map. RESULTS In Forte Orange, 4.3% of the population had S. mansoni and were found two B. glabrata and 26 B. straminea breeding sites. The breeding sites had temperatures of 25ºC to 41ºC, pH of 6.9 to 11.1, total dissolved solids between 148 and 661, and salinity of 1,000 d. In Serrambi, 4.4% of the population had S. mansoni and were found seven B. straminea and seven B. glabrata breeding sites. Breeding sites had temperatures of 24ºC to 36ºC, pH of 7.1 to 9.8, total dissolved solids between 116 and 855, and salinity of 1,000 d. The kernel estimator shows the clusters of positive patients and foci of Biomphalaria, and the digital elevation map indicates areas of rainwater concentration. The distance map shows the proximity of the snail foci with schools and health facilities. CONCLUSIONS Geoprocessing techniques prove to be a competent tool for locating and scaling the risk areas for schistosomiasis, and can subsidize the health services control actions. PMID:29166439

50 CFR 23.55 - How may I use a CITES specimen after import into the United States?

Code of Federal Regulations, 2014 CFR

2014-10-01

... from a registered commercial breeding operation. (4) Export permit or re-export certificate for a plant..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN... propagated plants with a source code of “A” for artificially propagated hybrid specimens derived from one or...

Invited review: Breeding and ethical perspectives on genetically modified and genome edited cattle.

PubMed

Eriksson, S; Jonas, E; Rydhmer, L; Röcklinsberg, H

2018-01-01

The hot topic of genetic modification and genome editing is sometimes presented as a rapid solution to various problems in the field of animal breeding and genetics. These technologies hold potential for future use in agriculture but we need to be aware of difficulties in large-scale application and integration in breeding schemes. In this review, we discuss applications of both classical genetic modifications (GM) using vectors and genome editing in dairy cattle breeding. We use an interdisciplinary approach considering both ethical and animal breeding perspectives. Decisions on how to make use of these techniques need to be made based not only on what is possible, but on what is reasonable to do. Principles of animal integrity, naturalness, risk perception, and animal welfare issues are examples of ethically relevant factors to consider. These factors also influence public perception and decisions about regulations by authorities. We need to acknowledge that we lack complete understanding of the genetic background of complex traits. It may be difficult, therefore, to predict the full effect of certain modifications in large-scale breeding programs. We present 2 potential applications: genome editing to dispense with dehorning, and insertion of human genes in bovine genomes to improve udder health as an example of classical GM. Both of these cases could be seen as beneficial for animal welfare but they differ in other aspects. In the former case, a genetic variant already present within the species is introduced, whereas in the latter case, transgenic animals are generated-this difference may influence how society regards the applications. We underline that the use of GM, as well as genome editing, of farm animals such as cattle is not independent of the context, and should be considered as part of an entire process, including, for example, the assisted reproduction technology that needs to be used. We propose that breeding organizations and breeding companies should take an active role in ethical discussions about the use of these techniques and thereby signal to society that these questions are being responsibly addressed. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A novel 3D imaging system for strawberry phenotyping.

PubMed

He, Joe Q; Harrison, Richard J; Li, Bo

2017-01-01

Accurate and quantitative phenotypic data in plant breeding programmes is vital in breeding to assess the performance of genotypes and to make selections. Traditional strawberry phenotyping relies on the human eye to assess most external fruit quality attributes, which is time-consuming and subjective. 3D imaging is a promising high-throughput technique that allows multiple external fruit quality attributes to be measured simultaneously. A low cost multi-view stereo (MVS) imaging system was developed, which captured data from 360° around a target strawberry fruit. A 3D point cloud of the sample was derived and analysed with custom-developed software to estimate berry height, length, width, volume, calyx size, colour and achene number. Analysis of these traits in 100 fruits showed good concordance with manual assessment methods. This study demonstrates the feasibility of an MVS based 3D imaging system for the rapid and quantitative phenotyping of seven agronomically important external strawberry traits. With further improvement, this method could be applied in strawberry breeding programmes as a cost effective phenotyping technique.

Genome engineering and plant breeding: impact on trait discovery and development.

PubMed

Nogué, Fabien; Mara, Kostlend; Collonnier, Cécile; Casacuberta, Josep M

2016-07-01

New tools for the precise modification of crops genes are now available for the engineering of new ideotypes. A future challenge in this emerging field of genome engineering is to develop efficient methods for allele mining. Genome engineering tools are now available in plants, including major crops, to modify in a predictable manner a given gene. These new techniques have a tremendous potential for a spectacular acceleration of the plant breeding process. Here, we discuss how genetic diversity has always been the raw material for breeders and how they have always taken advantage of the best available science to use, and when possible, increase, this genetic diversity. We will present why the advent of these new techniques gives to the breeders extremely powerful tools for crop breeding, but also why this will require the breeders and researchers to characterize the genes underlying this genetic diversity more precisely. Tackling these challenges should permit the engineering of optimized alleles assortments in an unprecedented and controlled way.

Targeted Proteomics Approach for Precision Plant Breeding.

PubMed

Chawade, Aakash; Alexandersson, Erik; Bengtsson, Therese; Andreasson, Erik; Levander, Fredrik

2016-02-05

Selected reaction monitoring (SRM) is a targeted mass spectrometry technique that enables precise quantitation of hundreds of peptides in a single run. This technique provides new opportunities for multiplexed protein biomarker measurements. For precision plant breeding, DNA-based markers have been used extensively, but the potential of protein biomarkers has not been exploited. In this work, we developed an SRM marker panel with assays for 104 potato (Solanum tuberosum) peptides selected using univariate and multivariate statistics. Thereafter, using random forest classification, the prediction markers were identified for Phytopthora infestans resistance in leaves, P. infestans resistance in tubers, and plant yield in potato leaf secretome samples. The results suggest that the marker panel has the predictive potential for three traits, two of which have no commercial DNA markers so far. Furthermore, the marker panel was also tested and found to be applicable to potato clones not used during the marker development. The proposed workflow is thus a proof-of-concept for targeted proteomics as an efficient readout in accelerated breeding for complex and agronomically important traits.

The genome draft of coconut (Cocos nucifera)

PubMed Central

Xiao, Yong; Xu, Pengwei; Fan, Haikuo; Baudouin, Luc; Xia, Wei; Bocs, Stéphanie; Xu, Junyang; Li, Qiong; Guo, Anping; Zhou, Lixia; Li, Jing; Wu, Yi; Ma, Zilong; Armero, Alix; Issali, Auguste Emmanuel; Liu, Na

2017-01-01

Abstract Coconut palm (Cocos nucifera,2n = 32), a member of genus Cocos and family Arecaceae (Palmaceae), is an important tropical fruit and oil crop. Currently, coconut palm is cultivated in 93 countries, including Central and South America, East and West Africa, Southeast Asia and the Pacific Islands, with a total growth area of more than 12 million hectares [1]. Coconut palm is generally classified into 2 main categories: “Tall” (flowering 8–10 years after planting) and “Dwarf” (flowering 4–6 years after planting), based on morphological characteristics and breeding habits. This Palmae species has a long growth period before reproductive years, which hinders conventional breeding progress. In spite of initial successes, improvements made by conventional breeding have been very slow. In the present study, we obtained de novo sequences of the Cocos nucifera genome: a major genomic resource that could be used to facilitate molecular breeding in Cocos nucifera and accelerate the breeding process in this important crop. A total of 419.67 gigabases (Gb) of raw reads were generated by the Illumina HiSeq 2000 platform using a series of paired-end and mate-pair libraries, covering the predicted Cocos nucifera genome length (2.42 Gb, variety “Hainan Tall”) to an estimated ×173.32 read depth. A total scaffold length of 2.20 Gb was generated (N50 = 418 Kb), representing 90.91% of the genome. The coconut genome was predicted to harbor 28 039 protein-coding genes, which is less than in Phoenix dactylifera (PDK30: 28 889), Phoenix dactylifera (DPV01: 41 660), and Elaeis guineensis (EG5: 34 802). BUSCO evaluation demonstrated that the obtained scaffold sequences covered 90.8% of the coconut genome and that the genome annotation was 74.1% complete. Genome annotation results revealed that 72.75% of the coconut genome consisted of transposable elements, of which long-terminal repeat retrotransposons elements (LTRs) accounted for the largest proportion (92.23%). Comparative analysis of the antiporter gene family and ion channel gene families between C. nucifera and Arabidopsis thaliana indicated that significant gene expansion may have occurred in the coconut involving Na+/H+ antiporter, carnitine/acylcarnitine translocase, potassium-dependent sodium-calcium exchanger, and potassium channel genes. Despite its agronomic importance, C. nucifera is still under-studied. In this report, we present a draft genome of C. nucifera and provide genomic information that will facilitate future functional genomics and molecular-assisted breeding in this crop species. PMID:29048487

The genome draft of coconut (Cocos nucifera).

PubMed

Xiao, Yong; Xu, Pengwei; Fan, Haikuo; Baudouin, Luc; Xia, Wei; Bocs, Stéphanie; Xu, Junyang; Li, Qiong; Guo, Anping; Zhou, Lixia; Li, Jing; Wu, Yi; Ma, Zilong; Armero, Alix; Issali, Auguste Emmanuel; Liu, Na; Peng, Ming; Yang, Yaodong

2017-11-01

Coconut palm (Cocos nucifera,2n = 32), a member of genus Cocos and family Arecaceae (Palmaceae), is an important tropical fruit and oil crop. Currently, coconut palm is cultivated in 93 countries, including Central and South America, East and West Africa, Southeast Asia and the Pacific Islands, with a total growth area of more than 12 million hectares [1]. Coconut palm is generally classified into 2 main categories: "Tall" (flowering 8-10 years after planting) and "Dwarf" (flowering 4-6 years after planting), based on morphological characteristics and breeding habits. This Palmae species has a long growth period before reproductive years, which hinders conventional breeding progress. In spite of initial successes, improvements made by conventional breeding have been very slow. In the present study, we obtained de novo sequences of the Cocos nucifera genome: a major genomic resource that could be used to facilitate molecular breeding in Cocos nucifera and accelerate the breeding process in this important crop. A total of 419.67 gigabases (Gb) of raw reads were generated by the Illumina HiSeq 2000 platform using a series of paired-end and mate-pair libraries, covering the predicted Cocos nucifera genome length (2.42 Gb, variety "Hainan Tall") to an estimated ×173.32 read depth. A total scaffold length of 2.20 Gb was generated (N50 = 418 Kb), representing 90.91% of the genome. The coconut genome was predicted to harbor 28 039 protein-coding genes, which is less than in Phoenix dactylifera (PDK30: 28 889), Phoenix dactylifera (DPV01: 41 660), and Elaeis guineensis (EG5: 34 802). BUSCO evaluation demonstrated that the obtained scaffold sequences covered 90.8% of the coconut genome and that the genome annotation was 74.1% complete. Genome annotation results revealed that 72.75% of the coconut genome consisted of transposable elements, of which long-terminal repeat retrotransposons elements (LTRs) accounted for the largest proportion (92.23%). Comparative analysis of the antiporter gene family and ion channel gene families between C. nucifera and Arabidopsis thaliana indicated that significant gene expansion may have occurred in the coconut involving Na+/H+ antiporter, carnitine/acylcarnitine translocase, potassium-dependent sodium-calcium exchanger, and potassium channel genes. Despite its agronomic importance, C. nucifera is still under-studied. In this report, we present a draft genome of C. nucifera and provide genomic information that will facilitate future functional genomics and molecular-assisted breeding in this crop species. © The Author 2017. Published by Oxford University Press.

Simulated Breeding

NASA Astrophysics Data System (ADS)

Unemi, Tatsuo

This chapter describes a basic framework of simulated breeding, a type of interactive evolutionary computing to breed artifacts, whose origin is Blind Watchmaker by Dawkins. These methods make it easy for humans to design a complex object adapted to his/her subjective criteria, just similarly to agricultural products we have been developing over thousands of years. Starting from randomly initialized genome, the solution candidates are improved through several generations with artificial selection. The graphical user interface helps the process of breeding with techniques of multifield user interface and partial breeding. The former improves the diversity of individuals that prevents being trapped at local optimum. The latter makes it possible for the user to fix features he/she already satisfied. These methods were examined through artistic applications by the author: SBART for graphics art and SBEAT for music. Combining with a direct genome editor and exportation to another graphical or musical tool on the computer, they can be powerful tools for artistic creation. These systems may contribute to the creation of a type of new culture.

The contribution of efficient production of monozygotic twins to beef cattle breeding

PubMed Central

HASHIYADA, Yutaka

2017-01-01

Production of sires with high breeding potential is indispensable for prompt and reliable breeding using their semen in the cattle industry. Currently, in Japan, we aim to further the production of Japanese black sires via a new breeding system that uses genetically homologous monozygotic twins so that better growth performance and carcass traits can be translated to the increased production of beef with higher economic value. Several studies have reported that monozygotic twins are produced by embryo bisection. On the other hand, with the evolution and stabilization of in vitro fertilization technology, it has become possible to produce multiple monozygotic twin calves from blastomeres separated from a cleavage-stage embryo. This review attempts to clarify breeding practices through revalidation of the factors that affect the production efficiency of monozygotic twin calves by embryo bisection. Furthermore, the establishment of a system for monozygotic twin embryo production via the simplified technique of blastomere separation is reviewed while showing data from our previously performed studies. PMID:29033399

Revisiting GMOs: Are There Differences in European Consumers’ Acceptance and Valuation for Cisgenically vs Transgenically Bred Rice?

PubMed Central

Delwaide, Anne-Cécile; Nalley, Lawton L.; Dixon, Bruce L.; Danforth, Diana M.; Nayga, Rodolfo M.; Van Loo, Ellen J.; Verbeke, Wim

2015-01-01

Both cisgenesis and transgenesis are plant breeding techniques that can be used to introduce new genes into plant genomes. However, transgenesis uses gene(s) from a non-plant organism or from a donor plant that is sexually incompatible with the recipient plant while cisgenesis involves the introduction of gene(s) from a crossable—sexually compatible—plant. Traditional breeding techniques could possibly achieve the same results as those from cisgenesis, but would require a much larger timeframe. Cisgenesis allows plant breeders to enhance an existing cultivar more quickly and with little to no genetic drag. The current regulation in the European Union (EU) on genetically modified organisms (GMOs) treats cisgenic plants the same as transgenic plants and both are mandatorily labeled as GMOs. This study estimates European consumers’ willingness-to-pay (WTP) for rice labeled as GM, cisgenic, with environmental benefits (which cisgenesis could provide), or any combination of these three attributes. Data were collected from 3,002 participants through an online survey administered in Belgium, France, the Netherlands, Spain and the United Kingdom in 2013. Censored regression models were used to model consumers’ WTP in each country. Model estimates highlight significant differences in WTP across countries. In all five countries, consumers are willing-to-pay a premium to avoid purchasing rice labeled as GM. In all countries except Spain, consumers have a significantly higher WTP to avoid consuming rice labeled as GM compared to rice labeled as cisgenic, suggesting that inserting genes from the plant’s own gene pool is more acceptable to consumers. Additionally, French consumers are willing-to-pay a premium for rice labeled as having environmental benefits compared to conventional rice. These findings suggest that not all GMOs are the same in consumers’ eyes and thus, from a consumer preference perspective, the differences between transgenic and cisgenic products are recommended to be reflected in GMO labeling and trade policies. PMID:25973946

Revisiting GMOs: Are There Differences in European Consumers' Acceptance and Valuation for Cisgenically vs Transgenically Bred Rice?

PubMed

Delwaide, Anne-Cécile; Nalley, Lawton L; Dixon, Bruce L; Danforth, Diana M; Nayga, Rodolfo M; Van Loo, Ellen J; Verbeke, Wim

2015-01-01

Both cisgenesis and transgenesis are plant breeding techniques that can be used to introduce new genes into plant genomes. However, transgenesis uses gene(s) from a non-plant organism or from a donor plant that is sexually incompatible with the recipient plant while cisgenesis involves the introduction of gene(s) from a crossable--sexually compatible--plant. Traditional breeding techniques could possibly achieve the same results as those from cisgenesis, but would require a much larger timeframe. Cisgenesis allows plant breeders to enhance an existing cultivar more quickly and with little to no genetic drag. The current regulation in the European Union (EU) on genetically modified organisms (GMOs) treats cisgenic plants the same as transgenic plants and both are mandatorily labeled as GMOs. This study estimates European consumers' willingness-to-pay (WTP) for rice labeled as GM, cisgenic, with environmental benefits (which cisgenesis could provide), or any combination of these three attributes. Data were collected from 3,002 participants through an online survey administered in Belgium, France, the Netherlands, Spain and the United Kingdom in 2013. Censored regression models were used to model consumers' WTP in each country. Model estimates highlight significant differences in WTP across countries. In all five countries, consumers are willing-to-pay a premium to avoid purchasing rice labeled as GM. In all countries except Spain, consumers have a significantly higher WTP to avoid consuming rice labeled as GM compared to rice labeled as cisgenic, suggesting that inserting genes from the plant's own gene pool is more acceptable to consumers. Additionally, French consumers are willing-to-pay a premium for rice labeled as having environmental benefits compared to conventional rice. These findings suggest that not all GMOs are the same in consumers' eyes and thus, from a consumer preference perspective, the differences between transgenic and cisgenic products are recommended to be reflected in GMO labeling and trade policies.

Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review.

PubMed

Ahlholm, Pekka; Sipilä, Kirsi; Vallittu, Pekka; Jakonen, Minna; Kotiranta, Ulla

2018-01-01

To conduct a systematic review to evaluate the evidence of possible benefits and accuracy of digital impression techniques vs. conventional impression techniques. Reports of digital impression techniques versus conventional impression techniques were systematically searched for in the following databases: Cochrane Central Register of Controlled Trials, PubMed, and Web of Science. A combination of controlled vocabulary, free-text words, and well-defined inclusion and exclusion criteria guided the search. Digital impression accuracy is at the same level as conventional impression methods in fabrication of crowns and short fixed dental prostheses (FDPs). For fabrication of implant-supported crowns and FDPs, digital impression accuracy is clinically acceptable. In full-arch impressions, conventional impression methods resulted in better accuracy compared to digital impressions. Digital impression techniques are a clinically acceptable alternative to conventional impression methods in fabrication of crowns and short FDPs. For fabrication of implant-supported crowns and FDPs, digital impression systems also result in clinically acceptable fit. Digital impression techniques are faster and can shorten the operation time. Based on this study, the conventional impression technique is still recommended for full-arch impressions. © 2016 by the American College of Prosthodontists.

Monitoring planktivorous seabird populations: Validating surface counts of crevice-nesting auklets using mark-resight techniques

USGS Publications Warehouse

Sheffield, L.M.; Gall, Adrian E.; Roby, D.D.; Irons, D.B.; Dugger, K.M.

2006-01-01

Least Auklets (Aethia pusilla (Pallas, 1811)) are the most abundant species of seabird in the Bering Sea and offer a relatively efficient means of monitoring secondary productivity in the marine environment. Counting auklets on surface plots is the primary method used to track changes in numbers of these crevice-nesters, but counts can be highly variable and may not be representative of the number of nesting individuals. We compared average maximum counts of Least Auklets on surface plots with density estimates based on mark–resight data at a colony on St. Lawrence Island, Alaska, during 2001–2004. Estimates of breeding auklet abundance from mark–resight averaged 8 times greater than those from maximum surface counts. Our results also indicate that average maximum surface counts are poor indicators of breeding auklet abundance and do not vary consistently with auklet nesting density across the breeding colony. Estimates of Least Auklet abundance from mark–resight were sufficiently precise to meet management goals for tracking changes in seabird populations. We recommend establishing multiple permanent banding plots for mark–resight studies on colonies selected for intensive long-term monitoring. Mark–resight is more likely to detect biologically significant changes in size of auklet breeding colonies than traditional surface count techniques.

Transgenic Farm Animals

NASA Astrophysics Data System (ADS)

Solomon, Morse B.; Eastridge, Janet S.; Paroczay, Ernest W.

Conventional science to improve muscle and meat parameters has involved breeding strategies, such as selection of dominant traits or selection of preferred traits by cross breeding, and the use of endogenous and exogenous hormones. Improvements in the quality of food products that enter the market have largely been the result of postharvest intervention strategies. Biotechnology is a more extreme scientific method that offers the potential to improve the quality, yield, and safety of food products by direct genetic manipulation. In the December 13, 2007 issue of the Southeast Farm Press, an article by Roy Roberson pointed out that biotechnology is driving most segments of U.S. farm growth. He indicated that nationwide, the agriculture industry is booming and much of that growth is the result of biotechnology advancements.

Crocodilian perivitelline membrane-bound sperm detection.

PubMed

Augustine, Lauren

2017-05-01

Advanced reproductive technologies (ART's) are often employed with various taxa to enhance captive breeding programs and maintain genetic diversity. Perivitelline membrane-bound (PVM-bound) sperm detection has previously been demonstrated in avian and chelonian species as a useful technique for breeding management. In the absence of embryotic development within an egg, this technique can detect the presence of sperm trapped on the oocyte membrane confirming breeding, male reproductive status, and pair compatibility. PVM-bound sperm were successfully detected in three clutches of Cuban crocodile (Crocodylus rhombifer) eggs at the Smithsonian's National Zoological Park (NZP) for the first time in any crocodilian species. PVM-bound sperm were detected in fresh and incubated C. rhombifer eggs, as well as eggs that were developing (banded) and those that were not (not banded). The results of this study showed significant differences in average sperm densities per egg between clutches (p = 0.001). Additionally, there was not a significant difference within clutches between eggs that banded and those that did not band (Clutch A, p = 0.505; Clutch B, p = 0.665; Clutch C, p = 0.266). The results of this study demonstrate the necessity to microscopically examine eggs that do not develop (do not band), to determine if sperm is present, which can help animal managers problem solve reproductive shortcomings. PVM-bound sperm detection could be a useful technique in assessing crocodilian breeding programs, as well as have potential uses in studies assessing sperm storage, artificial insemination, and artificial incubation. This article is a U.S. Government work and is in the public domain in the USA.

Gender identification of Grasshopper Sparrows comparing behavioral, morphological, and molecular techniques

USGS Publications Warehouse

Ammer, F.K.; Wood, P.B.; McPherson, R.J.

2008-01-01

Correct gender identification in monomorphic species is often difficult especially if males and females do not display obvious behavioral and breeding differences. We compared gender specific morphology and behavior with recently developed DNA techniques for gender identification in the monomorphic Grasshopper Sparrow (Ammodramus savannarum). Gender was ascertained with DNA in 213 individuals using the 2550F/2718R primer set and 3% agarose gel electrophoresis. Field observations using behavior and breeding characteristics to identify gender matched DNA analyses with 100% accuracy for adult males and females. Gender was identified with DNA for all captured juveniles that did not display gender specific traits or behaviors in the field. The molecular techniques used offered a high level of accuracy and may be useful in studies of dispersal mechanisms and winter assemblage composition in monomorphic species.

A non-invasive technique to bleed incubating birds without trapping: A blood-sucking bug in a hollow egg

USGS Publications Warehouse

Becker, P.H.; Voigt, C.C.; Arnold, J.M.; Nagel, R.

2006-01-01

We describe a non-invasive technique to obtain blood samples from incubating birds without trapping and handling. A larval instar of the blood-sucking bug Dipetalogaster maximus (Heteroptera) was put in a hollowed artificial egg which was placed in a common tern Sterna hirundo) nest. A gauze-covered hole in the egg allowed the bug to draw blood from the brood patch of breeding adults. We successfully collected 68 blood samples of sufficient amount (median=187 ??l). The daily success rate was highest during the early breeding season and averaged 34% for all trials. We could not detect any visible response by the incubating bird to the sting of the bug. This technique allows for non-invasive blood collection from bird species of various sizes without disturbance. ?? Dt. Ornithologen-Gesellschaft e.V. 2005.

Sustainable long-term conservation of rare cattle breeds using rotational AI sires

PubMed Central

Colleau, Jean-Jacques; Avon, Laurent

2008-01-01

The development of inbreeding in rotation breeding schemes, sequentially using artificial insemination (AI) sires over generations, was investigated for a full AI scheme. Asymptotic prediction formulae of inbreeding coefficients were established when the first rotation list of AI sires (possibly related) was in use. Simulated annealing provided the optimal rotation order of sires within this list, when the sires were related. These methods were also used for subsequent rotation lists, needed by the exhaustion of semen stores for the first bulls. Simulation was carried out starting with groups of independent sires, with different sizes. To generate a yearly inbreeding rate substantially lower than 0.05% (considered to be within reach by conventional conservation schemes using frequent replacements), the results obtained showed that the number of sires should be at least 10–15 and that the same sires should be used during at least 50 years. The ultimate objective was to examine the relevance of implementing rotation in breeding schemes on the actual rare French cattle breeds under conservation. The best candidate for such a test was the Villard-de-Lans breed (27 bulls and 73 000 doses for only 340 females) and it turned out to be the best performer with an inbreeding coefficient of only 7.4% after 500 years and five different sire lists. Due to the strong requirements on semen stores and on the stability of population size, actual implementation of this kind of conservation scheme was recommended only in special ('niche') cattle populations. PMID:18558074

Understanding farmers' preferences for artificial insemination services provided through dairy hubs.

PubMed

Omondi, I A; Zander, K K; Bauer, S; Baltenweck, I

2017-04-01

Africa has a shortage of animal products but increasing demand because of population growth, urbanisation and changing consumer patterns. Attempts to boost livestock production through the use of breeding technologies such as artificial insemination (AI) have been failing in many countries because costs have escalated and success rates have been relatively low. One example is Kenya, a country with a relatively large number of cows and a dairy industry model relevant to neighbouring countries. There, an innovative dairy marketing approach (farmer-owned collective marketing systems called dairy hubs) has been implemented to enhance access to dairy markets and dairy-related services, including breeding services such as AI. So far, the rate of participation in these dairy hubs has been slow and mixed. In order to understand this phenomenon better and to inform dairy-related development activities by the Kenyan government, we investigated which characteristics of AI services, offered through the dairy hubs, farmers prefer. To do so, we applied a choice experiment (CE), a non-market valuation technique, which allowed us to identify farmers' preferences for desired characteristics should more dairy hubs be installed in the future. This is the first study to use a CE to evaluate breeding services in Kenya and the results can complement findings of studies of breeding objectives and selection criteria. The results of the CE reveal that dairy farmers prefer to have AI services offered rather than having no service. Farmers prefer AI services to be available at dairy hubs rather than provided by private agents not affiliated to the hubs, to have follow-up services for pregnancy detections, and to use sexed semen rather than conventional semen. Farmers would further like some flexibility in payment systems which include input credit, and are willing to share the costs of any AI repeats that may need to occur. These results provide evidence of a positive attitude to AI services provided through the hubs, which could mean that AI uptake would improve if service characteristics are improved to match farmer preferences. The dairy hubs concept is currently in the implementation phase with most hubs at startup phase, hence understanding which AI service characteristics farmers prefer can inform the design of high-quality and cost-effective AI services in the future.

Evaluation of marginal gap of Ni-Cr copings made with conventional and accelerated casting techniques.

PubMed

Tannamala, Pavan Kumar; Azhagarasan, Nagarasampatti Sivaprakasam; Shankar, K Chitra

2013-01-01

Conventional casting techniques following the manufacturers' recommendations are time consuming. Accelerated casting techniques have been reported, but their accuracy with base metal alloys has not been adequately studied. We measured the vertical marginal gap of nickel-chromium copings made by conventional and accelerated casting techniques and determined the clinical acceptability of the cast copings in this study. Experimental design, in vitro study, lab settings. Ten copings each were cast by conventional and accelerated casting techniques. All copings were identical, only their mold preparation schedules differed. Microscopic measurements were recorded at ×80 magnification on the perpendicular to the axial wall at four predetermined sites. The marginal gap values were evaluated by paired t test. The mean marginal gap by conventional technique (34.02 μm) is approximately 10 μm lesser than that of accelerated casting technique (44.62 μm). As the P value is less than 0.0001, there is highly significant difference between the two techniques with regard to vertical marginal gap. The accelerated casting technique is time saving and the marginal gap measured was within the clinically acceptable limits and could be an alternative to time-consuming conventional techniques.

Genoproteomics-assisted improvement of Andrographis paniculata: toward a promising molecular and conventional breeding platform for autogamous plants affecting the pharmaceutical industry.

PubMed

Valdiani, Alireza; Talei, Daryush; Lattoo, Surrinder K; Ortiz, Rodomiro; Rasmussen, Søren Kjærsgaard; Batley, Jacqueline; Rafii, Mohd Yusop; Maziah, Mahmood; Sabu, Kallevettankuzhy K; Abiri, Rambod; Sakuanrungsirikul, Suchirat; Tan, Soon Guan

2017-09-01

Andrographis paniculata (Burm. f.) Wall. ex Nees. (AP) is a hermaphroditic, self-compatible, and habitual inbreeding plant. Its main bioactive component is andrographolide, which is capable of inducing autophagic cell death in some human cancer cells and helps fight HIV/AIDS. Increasing the andrographolide content by investigating the genetic mechanisms controlling its biosynthesis in order to improve and develop high-yielding cultivars are the main breeding targets for AP. However, there might exist some limitations or barriers for crossability within AP accessions. Recently, this problem was addressed in AP by using a combination of crossbreeding and biotechnology-aided genetic methods. This review emphasizes that development of a breeding platform in a hard-to-breed plant, such as AP, requires the involvement of a broad range of methods from classical genetics to molecular breeding. To this end, a phenological stage (for example, flowering and stigma development) can be simplified to a quantitative morphological trait (for example, bud or stigma length) to be used as an index to express the highest level of receptivity in order to manage outcrossing. The outcomes of the basic crossability research can be then employed in diallel mating and crossbreeding. This review explains how genomic data could produce useful information regarding genetic distance and its influence on the crossability of AP accessions. Our review indicates that co-dominant DNA markers, such as microsatellites, are also capable of resolving the evolutionary pathway and cryptic features of plant populations and such information can be used to select the best breeding strategy. This review also highlights the importance of proteomic analysis as a breeding tool. In this regard, protein diversification, as well as the impact of normal and stress-responsive proteins on morphometric and physiological behaviors, could be used in breeding programs. These findings have immense potential for improving plant production and, therefore, can be regarded as prospective breeding platforms for medicinal plants that have an autogamous mode of reproduction. Finally, this review suggests that novel site-directed genome editing approaches such as TALENs (Transcription Activator-Like Effector Nucleases) and CRISPR (clustered regularly interspaced short palindromic repeats)/Cas9 (CRISPR-associated protein-9 nuclease) systems together with other new plant breeding technologies (NPBT) should simultaneously be taken into consideration for improvement of pharmaceutical plants.

Influence of boar breeds or hybrid genetic composition on semen quality and seminal plasma biochemical variables.

PubMed

Žaja, Ivona Žura; Samardžija, Marko; Vince, Silvijo; Majić-Balić, Ivanka; Vilić, Marinko; Đuričić, Dražen; Milinković-Tur, Suzana

2016-01-01

The enzyme concentrations of seminal plasma are important for spermatozoa metabolism and function in boars. The need has arisen for introducing a biochemical evaluation of semen, along with the usual standard semen analyses. There are no data on the influence of boar breeds on the seminal plasma biochemical variables investigated in this study. Therefore, the objective was to determine the influence of breed and hybrid genetic composition of boars on semen quality and seminal plasma biochemical variables. Semen samples of 27 boars (Swedish Landrace, German Landrace, Large White, Pietrain and Pig Improvement Company hybrid-PIC-hybrid), aged between 1.5 and 3 years, were collected. After evaluation of semen quality, the seminal plasma was separated from the spermatozoa by centrifugation of semen. The seminal plasma was subjected to spectrophotometric analysis to determine alkaline phosphatase (ALP), acid phosphatase (ACP), γ-glutamyltransferase (GGT), creatine kinase (CK) and lactate dehydrogenase (LDH) and to atomic absorption spectrophotometric analysis to measure the concentration of calcium and magnesium. Conventional semen quality variables differed depending on breed and PIC-hybrid genetic composition, though these differences were typically insignificant. In the seminal plasma, significant differences were determined in enzyme activity (ALP, GGT, CK and LDH) and in calcium concentration among boars of different breeds. There are, therefore, differences in semen quality and significant differences in the seminal plasma biochemical variables among boars of different breeds and PIC-hybrid genetic composition. The data and differences in semen variables detected in the present study provide knowledge for enhancing evaluation and monitoring of boar reproductive potential, semen quality and explain the potential causes of boar infertility. Copyright © 2015 Elsevier B.V. All rights reserved.

Examining relationships between production and gastrointestinal nematode (GIN) measures in organic and conventionally reared Katahdin lambs

USDA-ARS?s Scientific Manuscript database

Katahdin sheep numbers are growing in the Southeastern US. It is a breed committed to the sheep industry’s goal of eradicating Scrapie by selecting for sheep with RR or QR at codon 171. Gastrointestinal nematodes remain a threat to the health and well-being of sheep due to widespread anthelmintic r...

50 CFR 23.55 - How may I use a CITES specimen after import into the United States?

Code of Federal Regulations, 2013 CFR

2013-10-01

... certificate for wildlife from a registered commercial breeding operation. (4) Export permit or re-export certificate for a plant from a registered nursery or under a permit with a source code of “D.” (5) U.S.-issued..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN...

50 CFR 23.55 - How may I use a CITES specimen after import into the United States?

Code of Federal Regulations, 2011 CFR

2011-10-01

... certificate for wildlife from a registered commercial breeding operation. (4) Export permit or re-export certificate for a plant from a registered nursery or under a permit with a source code of “D.” (5) U.S.-issued..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN...

50 CFR 23.55 - How may I use a CITES specimen after import into the United States?

Code of Federal Regulations, 2010 CFR

2010-10-01

... certificate for wildlife from a registered commercial breeding operation. (4) Export permit or re-export certificate for a plant from a registered nursery or under a permit with a source code of “D.” (5) U.S.-issued..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN...

50 CFR 23.55 - How may I use a CITES specimen after import into the United States?

Code of Federal Regulations, 2012 CFR

2012-10-01

... certificate for wildlife from a registered commercial breeding operation. (4) Export permit or re-export certificate for a plant from a registered nursery or under a permit with a source code of “D.” (5) U.S.-issued..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN...

Registration of N6002 soybean germplasm with enhanced yield derived from Japanese cultivars Fukuyutaka and Nakasennari and elevated seed protein content

USDA-ARS?s Scientific Manuscript database

This release is part of a continuing effort to broaden the genetic base of applied North American soybean [Glycine max L. (Merr.)] breeding programs. N6002 was cooperatively developed and released by the USDA-ARS and the North Carolina Agricultural Research Service in September 2014 as a convention...

Comparative Analysis Between Computed and Conventional Inferior Alveolar Nerve Block Techniques.

PubMed

Araújo, Gabriela Madeira; Barbalho, Jimmy Charles Melo; Dias, Tasiana Guedes de Souza; Santos, Thiago de Santana; Vasconcellos, Ricardo José de Holanda; de Morais, Hécio Henrique Araújo

2015-11-01

The aim of this randomized, double-blind, controlled trial was to compare the computed and conventional inferior alveolar nerve block techniques in symmetrically positioned inferior third molars. Both computed and conventional anesthetic techniques were performed in 29 healthy patients (58 surgeries) aged between 18 and 40 years. The anesthetic of choice was 2% lidocaine with 1: 200,000 epinephrine. The Visual Analogue Scale assessed the pain variable after anesthetic infiltration. Patient satisfaction was evaluated using the Likert Scale. Heart and respiratory rates, mean time to perform technique, and the need for additional anesthesia were also evaluated. Pain variable means were higher for the conventional technique as compared with computed, 3.45 ± 2.73 and 2.86 ± 1.96, respectively, but no statistically significant differences were found (P > 0.05). Patient satisfaction showed no statistically significant differences. The average computed technique runtime and the conventional were 3.85 and 1.61 minutes, respectively, showing statistically significant differences (P <0.001). The computed anesthetic technique showed lower mean pain perception, but did not show statistically significant differences when contrasted to the conventional technique.

Improved charge breeding efficiency of light ions with an electron cyclotron resonance ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vondrasek, R.; Kutsaev, Sergey; Delahaye, P.

2012-11-15

The Californium Rare Isotope Breeder Upgrade is a new radioactive beam facility for the Argonne Tandem Linac Accelerator System (ATLAS). The facility utilizes a {sup 252}Cf fission source coupled with an electron cyclotron resonance ion source to provide radioactive beam species for the ATLAS experimental program. The californium fission fragment distribution provides nuclei in the mid-mass range which are difficult to extract from production targets using the isotope separation on line technique and are not well populated by low-energy fission of uranium. To date the charge breeding program has focused on optimizing these mid-mass beams, achieving high charge breeding efficienciesmore » of both gaseous and solid species including 14.7% for the radioactive species {sup 143}Ba{sup 27+}. In an effort to better understand the charge breeding mechanism, we have recently focused on the low-mass species sodium and potassium which up to present have been difficult to charge breed efficiently. Unprecedented charge breeding efficiencies of 10.1% for {sup 23}Na{sup 7+} and 17.9% for {sup 39}K{sup 10+} were obtained injecting stable Na{sup +} and K{sup +} beams from a surface ionization source.« less

Improved charge breeding efficiency of light ions with an electron cyclotron resonance ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vondrasek, R.; Delahaye, P.; Kutsaev, Sergey

2012-11-01

The Californium Rare Isotope Breeder Upgrade is a new radioactive beam facility for the Argonne Tandem Linac Accelerator System (ATLAS). The facility utilizes a 252Cf fission source coupled with an electron cyclotron resonance ion source to provide radioactive beam species for the ATLAS experimental program. The californium fission fragment distribution provides nuclei in the mid-mass range which are difficult to extract from production targets using the isotope separation on line technique and are not well populated by low-energy fission of uranium. To date the charge breeding program has focused on optimizing these mid-mass beams, achieving high charge breeding efficiencies ofmore » both gaseous and solid species including 14.7% for the radioactive species 143Ba27+. In an effort to better understand the charge breeding mechanism, we have recently focused on the low-mass species sodium and potassium which up to present have been difficult to charge breed efficiently. Unprecedented charge breeding efficiencies of 10.1% for 23Na7+ and 17.9% for 39K10+ were obtained injecting stable Na+ and K+ beams from a surface ionization source.« less

Edible peanut worm ( Sipunculus nudus) in the Beibu Gulf: Resource, aquaculture, ecological impact and counterplan

NASA Astrophysics Data System (ADS)

Li, Junwei; Xie, Xiaoyong; Zhu, Changbo; Guo, Yongjian; Chen, Suwen

2017-10-01

Sipunculus nudus is an important economic species because of its high nutritional and medicinal values. The exploitation and utilization of S. nudus primarily occur in the coastal regions of the Beibu Gulf. However, wild resource of S. nudus is rapidly decreasing because of the overexploitation, which has led to considerable developments of artificial breeding techniques. The cultivation scale of S. nudus has increased in response to successful artificial breeding; however, methods for culturing S. nudus in tidal flats or ponds require further study. Most studies have focused on the breeding, nutrition, medical value and ecological impact of these worms. Studies on the distribution, sediment requirements, nutrition characteristics, breeding techniques and aquaculture ecology of this species are summarized in this paper to promote the development of the aquaculture industry for S. nudus. The high biomass of S. nudus in the Beibu Gulf is positively correlated with the sediment characteristics and water quality of the region. The production of peanut worm has improved to some extent through culturing; however, the nutrient value and ecological environment problems have been observed, which reflect the over exploitation of trace elements and the sediment. These problems will worsen unless they are resolved, and the release of organic materials, nitrogen and phosphorus during harvesting impacts the coastal environment. Moreover, genetic erosion is a potential risk for larvae in artificial breeding programs in tidal flats. Therefore, culturing and collecting methods should be improved and the wild resource conservation should be implemented to promote the sustainable development of the peanut worm.

Improving industrial yeast strains: exploiting natural and artificial diversity.

PubMed

Steensels, Jan; Snoek, Tim; Meersman, Esther; Picca Nicolino, Martina; Voordeckers, Karin; Verstrepen, Kevin J

2014-09-01

Yeasts have been used for thousands of years to make fermented foods and beverages, such as beer, wine, sake, and bread. However, the choice for a particular yeast strain or species for a specific industrial application is often based on historical, rather than scientific grounds. Moreover, new biotechnological yeast applications, such as the production of second-generation biofuels, confront yeast with environments and challenges that differ from those encountered in traditional food fermentations. Together, this implies that there are interesting opportunities to isolate or generate yeast variants that perform better than the currently used strains. Here, we discuss the different strategies of strain selection and improvement available for both conventional and nonconventional yeasts. Exploiting the existing natural diversity and using techniques such as mutagenesis, protoplast fusion, breeding, genome shuffling and directed evolution to generate artificial diversity, or the use of genetic modification strategies to alter traits in a more targeted way, have led to the selection of superior industrial yeasts. Furthermore, recent technological advances allowed the development of high-throughput techniques, such as 'global transcription machinery engineering' (gTME), to induce genetic variation, providing a new source of yeast genetic diversity. © 2014 The Authors. FEMS Microbiology Reviews published by John Wiley & Sons Ltd on behalf of Federation of European Microbiological Societies.

Short-term effects of fire and other fuel reduction treatments on breeding birds in a Southern Appalachian upland hardwood forest

Treesearch

Cathryn H. Greenberg; Aimee Livings Tomcho; J. Drew Lanham; Thomas a. Waldrop; Jospeh Tomcho; Ross J. Phillips; Dean Simon

2007-01-01

We compared the effects of 3 fuel reduction techniques and a control on breeding birds during 2001–2005 using 50-m point counts. Four experimental units, each .14 ha, were contained within each of 3 replicate blocks at the Green River Game Land, Polk County, North Carolina, USA. Treatments were 1) prescribed burn, 2) mechanical understory reduction (chainsaw-felling...

How does embryo manipulation fit into present and future pig reproduction?

PubMed

Polge, C

1985-01-01

Available techniques for the collection and direct transplantation of pig embryos are simple and efficient and could be used for the expansion of new lines, for increasing selection pressure in nucleus herds and for extracting healthy stock from a diseased source. However, the reduced viability of pig embryos during culture in vitro and the inability as yet to preserve them by deep-freezing impose limits to the use of embryo transplantation for the export or import of potential breeding stock. The efficiency of breeding schemes could be improved by the sexing of embryos and the possibility of producing genetically identical twins or quadruplets by micromanipulation of embryos should improve the efficiency of animal experimentation. Chimaerism may be used to rescue embryos of a non-viable genotype such as parthenotes or those derived by hybridization, but the greatest revolution in pig breeding may be brought about by the introduction of foreign cloned genes into eggs and the production of transgenic animals. Eggs at an appropriate stage for microinjection may be provided in the future by techniques for the maturation and fertilization of oocytes in vitro. Animal breeders should be aware of the potential impact of techniques for the manipulation of eggs and embryos on future developments in animal production.

Captive breeding and reintroduction of the endangered masked bobwhite

USGS Publications Warehouse

Carpenter, J.W.; Gabel, R.R.; Goodwin, J.G.

1991-01-01

Efforts to restore the endangered masked bobwhite (Colinus virginianus ridgwayi) to its former range have required 1) habitat acquisition, restoration, and preservation; 2) captive propagation; and 3) reintroduction .bf captive-bred stock. In its role to recover the masked bobwhite, the Patuxent Wildlife Research Center (U.S. Fish and Wildli e Service) has refined captive breeding techniques; provided captive-produced stock for release; conducted field research on the distribution, limiting factors, and habitat characteristics of this species; and developed release methods. Techniques for the husbandry and captive management, breeding, artificial incubation and hatching of eggs, and rearing of young of the masked bobwhite have been developed. Successful reintroduction techniques for the masked bobwhite have included prerelease conditioning and/or cross-fostering of captive-reared masked bobwhite chicks to a wild-caught, related, vasectomized bobwhite species and their release to the wild as family units. In addition, the establishment by the U. S. Fish and Wildlife Service of the Buenos Aires National Wildlife Refuge in 1985 has further enhanced the potential for establishing a self-sustaining population of the masked bobwhite in the U. S. Through continued releases and active management of habitat, therefore, it is believed that the masked bobwhite can become permanently established at the refuge to ensure its continued survival in the wild.

Field metabolism and water flux of carolina chickadees during breeding and nonbreeding seasons: A test of the "peak-demand" and "reallocation" hypotheses

USGS Publications Warehouse

Doherty, P.F.; Williams, J.B.; Grubb, T.C.

2001-01-01

We tested the "peak-demand" and "reallocation" hypotheses of seasonal energy expenditure which predict, respectively, that energy expenditure is greatest during the breeding season or varies little seasonally. We tested these predictions by utilizing the doubly labeled water technique to estimate energy expenditure and water flux of Carolina Chickadees (Poecile carolinensis) in both the breeding and nonbreeding seasons. Similar to Weathers et al. (1999), we did not find support for either of these hypotheses, finding instead that energy expenditure was greater during the nonbreeding season. The fact that our study site was at the northern edge of the species' range, where winters are severe, may have influenced this result. Comparisons with other parid studies were equivocal because body size was an important factor in explaining seasonal energetics, and only the larger species have been examined during the breeding season.

Genetic and genomic analyses for economically important traits and their applications in molecular breeding of cultured fish.

PubMed

Tong, JinGou; Sun, XiaoWen

2015-02-01

The traits of cultured fish must continually be genetically improved to supply high-quality animal protein for human consumption. Economically important fish traits are controlled by multiple gene quantitative trait loci (QTL), most of which have minor effects, but a few genes may have major effects useful for molecular breeding. In this review, we chose relevant studies on some of the most intensively cultured fish and concisely summarize progress on identifying and verifying QTLs for such traits as growth, disease and stress resistance and sex in recent decades. The potential applications of these major-effect genes and their associated markers in marker-assisted selection and molecular breeding, as well as future research directions are also discussed. These genetic and genomic analyses will be valuable for elucidating the mechanisms modulating economically important traits and to establish more effective molecular breeding techniques in fish.

Physiological breeding.

PubMed

Reynolds, Matthew; Langridge, Peter

2016-06-01

Physiological breeding crosses parents with different complex but complementary traits to achieve cumulative gene action for yield, while selecting progeny using remote sensing, possibly in combination with genomic selection. Physiological approaches have already demonstrated significant genetic gains in Australia and several developing countries of the International Wheat Improvement Network. The techniques involved (see Graphical Abstract) also provide platforms for research and refinement of breeding methodologies. Recent examples of these include screening genetic resources for novel expression of Calvin cycle enzymes, identification of common genetic bases for heat and drought adaptation, and genetic dissection of trade-offs among yield components. Such information, combined with results from physiological crosses designed to test novel trait combinations, lead to more precise breeding strategies, and feed models of genotype-by-environment interaction to help build new plant types and experimental environments for future climates. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

RAPD/SCAR Approaches for Identification of Adulterant Breeds' Milk in Dairy Products.

PubMed

Cunha, Joana T; Domingues, Lucília

2017-01-01

Food safety and quality are nowadays a major consumers' concern. In the dairy industry the fraudulent addition of cheaper/lower-quality milks from nonlegitimate species/breeds compromises the quality and value of the final product. Despite the already existing approaches for identification of the species origin of milk, there is little information regarding differentiation at an intra-species level. In this protocol we describe a low-cost, sensitive, fast, and reliable analytical technique-Random Amplified Polymorphic DNA/Sequence Characterized Amplified Region (RAPD/SCAR)-capable of an efficient detection of adulterant breeds in milk mixtures used for fraudulent manufacturing of dairy products and suitable for the detection of milk adulteration in processed dairy foods.

Retention of Provitamin A Carotenoids in Staple Crops Targeted for Biofortification in Africa: Cassava, Maize and Sweet Potato

PubMed Central

De Moura, Fabiana F.; Miloff, Alexander; Boy, Erick

2015-01-01

HarvestPlus, part of the Consultative Group on Internation Agriculture research (CGIAR) Program on Agriculture for Nutrition and Health (A4NH) uses conventional plant breeding techniques to develop staple food crops that are rich in micronutrients, a food-based approach to reduce micronutrient malnutrition known as biofortification. The nutritional breeding targets are established based on the food intake of target populations, nutrient losses during storage and processing and bioavailability. This review collates the evidence on the retention of provitamin A carotenoid (pVAC) after processing, cooking, and storing of the staple crops targeted for pVAC biofortification: cassava, maize, and sweet potato. Sun drying was more detrimental to the pVAC levels (27–56% retention) in cassava than shade (59%) or oven (55–91%) drying, while the pVAC retention levels (66–96%) in sweet potato were not significantly different among the various drying methods. Overall, boiling and steaming had higher pVAC retention (80–98%) compared to baking (30–70%) and frying (18–54%). Gari, the most frequently consumed form of cassava in West Africa had the lowest pVAC retention (10–30%). The pVAC retention of maize grain and cassava and sweet potato flour reached levels as low as 20% after 1–4 months of storage and was highly dependent on genotype. Therefore, we recommend that an evaluation of the pVAC degradation rate among different genotypes be performed before a high pVAC crop is promoted. PMID:24915386

Biomechanical comparison of the double-push technique and the conventional skate skiing technique in cross-country sprint skiing.

PubMed

Stöggl, Thomas; Müller, Erich; Lindinger, Stefan

2008-09-01

The aims of the study were to: (1) adapt the "double-push" technique from inline skating to cross-country skiing; (2) compare this new skiing technique with the conventional skate skiing cross-country technique; and (3) test the hypothesis that the double-push technique improves skiing speed in a short sprint. 13 elite skiers performed maximum-speed sprints over 100 m using the double-push skate skiing technique and using the conventional "V2" skate skiing technique. Pole and plantar forces, knee angle, cycle characteristics, and electromyography of nine lower body muscles were analysed. We found that the double-push technique could be successfully transferred to cross-country skiing, and that this new technique is faster than the conventional skate skiing technique. The double-push technique was 2.9 +/- 2.2% faster (P < 0.001), which corresponds to a time advantage of 0.41 +/- 0.31 s over 100 m. The double-push technique had a longer cycle length and a lower cycle rate, and it was characterized by higher muscle activity, higher knee extension amplitudes and velocities, and higher peak foot forces, especially in the first phase of the push-off. Also, the foot was more loaded laterally in the double-push technique than in the conventional skate skiing technique.

Provitamin A accumulation in cassava (Manihot esculenta) roots driven by a single nucleotide polymorphism in a phytoene synthase gene.

PubMed

Welsch, Ralf; Arango, Jacobo; Bär, Cornelia; Salazar, Bertha; Al-Babili, Salim; Beltrán, Jesús; Chavarriaga, Paul; Ceballos, Hernan; Tohme, Joe; Beyer, Peter

2010-10-01

Cassava (Manihot esculenta) is an important staple crop, especially in the arid tropics. Because roots of commercial cassava cultivars contain a limited amount of provitamin A carotenoids, both conventional breeding and genetic modification are being applied to increase their production and accumulation to fight vitamin A deficiency disorders. We show here that an allelic polymorphism in one of the two expressed phytoene synthase (PSY) genes is capable of enhancing the flux of carbon through carotenogenesis, thus leading to the accumulation of colored provitamin A carotenoids in storage roots. A single nucleotide polymorphism present only in yellow-rooted cultivars cosegregates with colored roots in a breeding pedigree. The resulting amino acid exchange in a highly conserved region of PSY provides increased catalytic activity in vitro and is able to increase carotenoid production in recombinant yeast and Escherichia coli cells. Consequently, cassava plants overexpressing a PSY transgene produce yellow-fleshed, high-carotenoid roots. This newly characterized PSY allele provides means to improve cassava provitamin A content in cassava roots through both breeding and genetic modification.

Provitamin A Accumulation in Cassava (Manihot esculenta) Roots Driven by a Single Nucleotide Polymorphism in a Phytoene Synthase Gene[W

PubMed Central

Welsch, Ralf; Arango, Jacobo; Bär, Cornelia; Salazar, Bertha; Al-Babili, Salim; Beltrán, Jesús; Chavarriaga, Paul; Ceballos, Hernan; Tohme, Joe; Beyer, Peter

2010-01-01

Cassava (Manihot esculenta) is an important staple crop, especially in the arid tropics. Because roots of commercial cassava cultivars contain a limited amount of provitamin A carotenoids, both conventional breeding and genetic modification are being applied to increase their production and accumulation to fight vitamin A deficiency disorders. We show here that an allelic polymorphism in one of the two expressed phytoene synthase (PSY) genes is capable of enhancing the flux of carbon through carotenogenesis, thus leading to the accumulation of colored provitamin A carotenoids in storage roots. A single nucleotide polymorphism present only in yellow-rooted cultivars cosegregates with colored roots in a breeding pedigree. The resulting amino acid exchange in a highly conserved region of PSY provides increased catalytic activity in vitro and is able to increase carotenoid production in recombinant yeast and Escherichia coli cells. Consequently, cassava plants overexpressing a PSY transgene produce yellow-fleshed, high-carotenoid roots. This newly characterized PSY allele provides means to improve cassava provitamin A content in cassava roots through both breeding and genetic modification. PMID:20889914

Molecular traceability of beef from synthetic Mexican bovine breeds.

PubMed

Rodríguez-Ramírez, R; Arana, A; Alfonso, L; González-Córdova, A F; Torrescano, G; Guerrero Legarreta, I; Vallejo-Cordoba, B

2011-10-06

Traceability ensures a link between carcass, quarters or cuts of beef and the individual animal or the group of animals from which they are derived. Meat traceability is an essential tool for successful identification and recall of contaminated products from the market during a food crisis. Meat traceability is also extremely important for protection and value enhancement of good-quality brands. Molecular meat traceability would allow verification of conventional methods used for beef tracing in synthetic Mexican bovine breeds. We evaluated a set of 11 microsatellites for their ability to identify animals belonging to these synthetic breeds, Brangus and Charolais/Brahman (78 animals). Seven microsatellite markers allowed sample discrimination with a match probability, defined as the probability of finding two individuals sharing by chance the same genotypic profile, of 10(-8). The practical application of the marker set was evaluated by testing eight samples from carcasses and pieces of meat at the slaughterhouse and at the point of sale. The DNA profiles of the two samples obtained at these two different points in the production-commercialization chain always proved that they came from the same animal.

[Influence of probiotics on the establishment of a competitive flora, as well as on antibiotic use and performance parameters in pig breeding farms].

PubMed

Dünner, B; Birrer, S; Nathues, C; Hässig, M; Stephan, R; Sidler, X

2017-08-01

The aim of the present study was to investigate the effect of Probiotics in Progress (PIP) on the establishment of a competitive flora as well as on antibiotic use and losses of suckling piglets in pig breeding farms. The tested products were PIP AHC® and PIP AHS® produced by "Chrisal AG" in Lommel, Belgium. PIP`s are cleaning products containing Bacillus spores. According to the manufacturer's specifications, they are able to establish a steady non-pathogenic stable flora. In a field trial in 19 pig breeding farms, the use of PIP-products did not lead to any reduction of antibiotic use or improvement of fertility parameters, especially in relation to losses of suckling piglets. In addition, we compared the bacterial flora using PIP products with the flora under conventional management conditions in a farrowing pen by means of swab samples. The use of PIP-products did not lead to any significant effect on the pen flora. Only very few swab samples contained a majority of probiotic Bacillus spp.

Molecular Detection of Hematozoa Infections in Tundra Swans Relative to Migration Patterns and Ecological Conditions at Breeding Grounds

PubMed Central

Ramey, Andrew M.; Ely, Craig R.; Schmutz, Joel A.; Pearce, John M.; Heard, Darryl J.

2012-01-01

Tundra swans (Cygnus columbianus) are broadly distributed in North America, use a wide variety of habitats, and exhibit diverse migration strategies. We investigated patterns of hematozoa infection in three populations of tundra swans that breed in Alaska using satellite tracking to infer host movement and molecular techniques to assess the prevalence and genetic diversity of parasites. We evaluated whether migratory patterns and environmental conditions at breeding areas explain the prevalence of blood parasites in migratory birds by contrasting the fit of competing models formulated in an occupancy modeling framework and calculating the detection probability of the top model using Akaike Information Criterion (AIC). We described genetic diversity of blood parasites in each population of swans by calculating the number of unique parasite haplotypes observed. Blood parasite infection was significantly different between populations of Alaska tundra swans, with the highest estimated prevalence occurring among birds occupying breeding areas with lower mean daily wind speeds and higher daily summer temperatures. Models including covariates of wind speed and temperature during summer months at breeding grounds better predicted hematozoa prevalence than those that included annual migration distance or duration. Genetic diversity of blood parasites in populations of tundra swans appeared to be relative to hematozoa prevalence. Our results suggest ecological conditions at breeding grounds may explain differences of hematozoa infection among populations of tundra swans that breed in Alaska. PMID:23049862

Molecular detection of hematozoa infections in tundra swans relative to migration patterns and ecological conditions at breeding grounds

USGS Publications Warehouse

Ramey, Andrew M.; Ely, Craig R.; Schmutz, Joel A.; Pearce, John M.; Heard, Darryl J.

2012-01-01

Tundra swans (Cygnus columbianus) are broadly distributed in North America, use a wide variety of habitats, and exhibit diverse migration strategies. We investigated patterns of hematozoa infection in three populations of tundra swans that breed in Alaska using satellite tracking to infer host movement and molecular techniques to assess the prevalence and genetic diversity of parasites. We evaluated whether migratory patterns and environmental conditions at breeding areas explain the prevalence of blood parasites in migratory birds by contrasting the fit of competing models formulated in an occupancy modeling framework and calculating the detection probability of the top model using Akaike Information Criterion (AIC). We described genetic diversity of blood parasites in each population of swans by calculating the number of unique parasite haplotypes observed. Blood parasite infection was significantly different between populations of Alaska tundra swans, with the highest estimated prevalence occurring among birds occupying breeding areas with lower mean daily wind speeds and higher daily summer temperatures. Models including covariates of wind speed and temperature during summer months at breeding grounds better predicted hematozoa prevalence than those that included annual migration distance or duration. Genetic diversity of blood parasites in populations of tundra swans appeared to be relative to hematozoa prevalence. Our results suggest ecological conditions at breeding grounds may explain differences of hematozoa infection among populations of tundra swans that breed in Alaska.

Molecular detection of hematozoa infections in tundra swans relative to migration patterns and ecological conditions at breeding grounds.

PubMed

Ramey, Andrew M; Ely, Craig R; Schmutz, Joel A; Pearce, John M; Heard, Darryl J

2012-01-01

Tundra swans (Cygnus columbianus) are broadly distributed in North America, use a wide variety of habitats, and exhibit diverse migration strategies. We investigated patterns of hematozoa infection in three populations of tundra swans that breed in Alaska using satellite tracking to infer host movement and molecular techniques to assess the prevalence and genetic diversity of parasites. We evaluated whether migratory patterns and environmental conditions at breeding areas explain the prevalence of blood parasites in migratory birds by contrasting the fit of competing models formulated in an occupancy modeling framework and calculating the detection probability of the top model using Akaike Information Criterion (AIC). We described genetic diversity of blood parasites in each population of swans by calculating the number of unique parasite haplotypes observed. Blood parasite infection was significantly different between populations of Alaska tundra swans, with the highest estimated prevalence occurring among birds occupying breeding areas with lower mean daily wind speeds and higher daily summer temperatures. Models including covariates of wind speed and temperature during summer months at breeding grounds better predicted hematozoa prevalence than those that included annual migration distance or duration. Genetic diversity of blood parasites in populations of tundra swans appeared to be relative to hematozoa prevalence. Our results suggest ecological conditions at breeding grounds may explain differences of hematozoa infection among populations of tundra swans that breed in Alaska.

Radial and ulnar fracture treatment with paraosseous clamp-cerclage stabilisation technique in 17 toy breed dogs

PubMed Central

Manchi, George; Brunnberg, Mathias M; Shahid, Muhammad; Al Aiyan, Ahmad; Chow, Eric; Brunnberg, Leo; Stein, Silke

2017-01-01

Objective Description of surgical technique, complications and outcome of radius/ulna fractures in toy and miniature breed dogs treated with the paraosseous clamp-cerclage stabilisation (PCCS) method. Study design Retrospective study. Methods Clinical records of small breed dogs with fractures of the radius and ulna were reviewed between January 2011 and January 2016. Inclusion criteria were bodyweight of ≤3.5 kg, fracture of the radius and ulna of one or two limbs without previous repair attempts, available follow-up information, and the use of PCCS for repair of the fracture as the sole method of fixation. Results Seventeen fractures in 17 dogs were included in the study. Radiographic union was documented in 13/17 cases. Median time to radiographic union was 13 weeks (range: 5–53 weeks). Major complications occurred in 24 per cent (4/17) due to implant failure, and for revision surgery the PCCS method was chosen in all four cases. Three of four revised fractures healed radiographically. One of the four dogs was lost for radiographic follow-up, but the owner could be contacted for a telephone questionnaire. Eleven of 17 dogs achieved an excellent return to function without any lameness during clinical examination, but 5/17 dogs showed an intermittent mild lameness despite full radiographic union. Routine implant removal was performed in 9/17 dogs. The owners of 15/17 dogs could be contacted for a telephone questionnaire for a long-term follow-up. No further complications were reported. Conclusions PCCS is a feasible low-cost internal fixation technique for repairing radial and ulnar fractures in toy breed dogs. Further biomechanical and clinical studies are needed for better evaluation of the PCCS method. PMID:28761666

Single, transcervical insemination using frozen-thawed semen in the Greyhound: a case series study.

PubMed

Pretzer, S D; Lillich, R K; Althouse, G C

2006-04-01

Transcervical insemination (TCI) has generated recent interest as an assisted reproductive technique in the dog. A case series study was performed to determine if TCI using frozen-thawed semen was a viable technique to offer in a general veterinary practice setting. Over a period exceeding 28 months, 137 Greyhound bitches were presented for assisted breeding. A single, timed insemination using a rigid cystoscope to aid in transcervical deposition of a frozen-thawed semen dose was given within 72 h after the behaviorally estrual bitch had a > 4 ng/mL serum progesterone concentration and estrus-categorized vaginal cytology. Litter size, pregnancy and whelping rate were collected; their association to semen center and stud dog were quantified. Of the 137 bitches, 117 were bred for one cycle and 20 were bred for two or more cycles, giving a total of 161 single, timed inseminations. Pregnancy rate was 89.4%, with 141 (87.5%) whelping. Litter size was 6.9+/-2.7 (mean+/-S.D.) pups. Semen center (P=0.84) and stud (P=0.79) had no effect on pregnancy. These results were quite favorable when compared to prior TCI studies, and are possibly due to the use of a single breed (i.e., Greyhound) with good fertility. This study supported the application of TCI, in Greyhounds, as a successful and viable service to offer in private practice. Additionally, these results have value in their use for benchmarking future breed-specific and TCI research. Serendipitously, the apparent fecundity results obtained in this observational study suggests a possible greater appreciation be given to breed composition and choice in assisted reproductive technique studies.

Manipulation of Metabolic Pathways to Develop Vitamin-Enriched Crops for Human Health

PubMed Central

Jiang, Ling; Wang, Weixuan; Lian, Tong; Zhang, Chunyi

2017-01-01

Vitamin deficiencies are major forms of micronutrient deficiencies, and are associated with huge economic losses as well as severe physical and intellectual damages to humans. Much evidence has demonstrated that biofortification plays an important role in combating vitamin deficiencies due to its economical and effective delivery of nutrients to populations in need. Biofortification enables food plants to be enriched with vitamins through conventional breeding and/or biotechnology. Here, we focus on the progress in the manipulation of the vitamin metabolism, an essential part of biofortification, by the genetic modification or by the marker-assisted selection to understand mechanisms underlying metabolic improvement in food plants. We also propose to integrate new breeding technologies with metabolic pathway modification to facilitate biofortification in food plants and, thereby, to benefit human health. PMID:28634484

Agricultural biotechnology for crop improvement in a variable climate: hope or hype?

PubMed

Varshney, Rajeev K; Bansal, Kailash C; Aggarwal, Pramod K; Datta, Swapan K; Craufurd, Peter Q

2011-07-01

Developing crops that are better adapted to abiotic stresses is important for food production in many parts of the world today. Anticipated changes in climate and its variability, particularly extreme temperatures and changes in rainfall, are expected to make crop improvement even more crucial for food production. Here, we review two key biotechnology approaches, molecular breeding and genetic engineering, and their integration with conventional breeding to develop crops that are more tolerant of abiotic stresses. In addition to a multidisciplinary approach, we also examine some constraints that need to be overcome to realize the full potential of agricultural biotechnology for sustainable crop production to meet the demands of a projected world population of nine billion in 2050. Copyright © 2011 Elsevier Ltd. All rights reserved.

A Simplified Technique for Implant-Abutment Level Impression after Soft Tissue Adaptation around Provisional Restoration

PubMed Central

Kutkut, Ahmad; Abu-Hammad, Osama; Frazer, Robert

2016-01-01

Impression techniques for implant restorations can be implant level or abutment level impressions with open tray or closed tray techniques. Conventional implant-abutment level impression techniques are predictable for maximizing esthetic outcomes. Restoration of the implant traditionally requires the use of the metal or plastic impression copings, analogs, and laboratory components. Simplifying the dental implant restoration by reducing armamentarium through incorporating conventional techniques used daily for crowns and bridges will allow more general dentists to restore implants in their practices. The demonstrated technique is useful when modifications to implant abutments are required to correct the angulation of malpositioned implants. This technique utilizes conventional crown and bridge impression techniques. As an added benefit, it reduces costs by utilizing techniques used daily for crowns and bridges. The aim of this report is to describe a simplified conventional impression technique for custom abutments and modified prefabricated solid abutments for definitive restorations. PMID:29563457

A comparison of breeding and ensemble transform vectors for global ensemble generation

NASA Astrophysics Data System (ADS)

Deng, Guo; Tian, Hua; Li, Xiaoli; Chen, Jing; Gong, Jiandong; Jiao, Meiyan

2012-02-01

To compare the initial perturbation techniques using breeding vectors and ensemble transform vectors, three ensemble prediction systems using both initial perturbation methods but with different ensemble member sizes based on the spectral model T213/L31 are constructed at the National Meteorological Center, China Meteorological Administration (NMC/CMA). A series of ensemble verification scores such as forecast skill of the ensemble mean, ensemble resolution, and ensemble reliability are introduced to identify the most important attributes of ensemble forecast systems. The results indicate that the ensemble transform technique is superior to the breeding vector method in light of the evaluation of anomaly correlation coefficient (ACC), which is a deterministic character of the ensemble mean, the root-mean-square error (RMSE) and spread, which are of probabilistic attributes, and the continuous ranked probability score (CRPS) and its decomposition. The advantage of the ensemble transform approach is attributed to its orthogonality among ensemble perturbations as well as its consistence with the data assimilation system. Therefore, this study may serve as a reference for configuration of the best ensemble prediction system to be used in operation.

Preselection statistics and Random Forest classification identify population informative single nucleotide polymorphisms in cosmopolitan and autochthonous cattle breeds.

PubMed

Bertolini, F; Galimberti, G; Schiavo, G; Mastrangelo, S; Di Gerlando, R; Strillacci, M G; Bagnato, A; Portolano, B; Fontanesi, L

2018-01-01

Commercial single nucleotide polymorphism (SNP) arrays have been recently developed for several species and can be used to identify informative markers to differentiate breeds or populations for several downstream applications. To identify the most discriminating genetic markers among thousands of genotyped SNPs, a few statistical approaches have been proposed. In this work, we compared several methods of SNPs preselection (Delta, F st and principal component analyses (PCA)) in addition to Random Forest classifications to analyse SNP data from six dairy cattle breeds, including cosmopolitan (Holstein, Brown and Simmental) and autochthonous Italian breeds raised in two different regions and subjected to limited or no breeding programmes (Cinisara, Modicana, raised only in Sicily and Reggiana, raised only in Emilia Romagna). From these classifications, two panels of 96 and 48 SNPs that contain the most discriminant SNPs were created for each preselection method. These panels were evaluated in terms of the ability to discriminate as a whole and breed-by-breed, as well as linkage disequilibrium within each panel. The obtained results showed that for the 48-SNP panel, the error rate increased mainly for autochthonous breeds, probably as a consequence of their admixed origin lower selection pressure and by ascertaining bias in the construction of the SNP chip. The 96-SNP panels were generally more able to discriminate all breeds. The panel derived by PCA-chrom (obtained by a preselection chromosome by chromosome) could identify informative SNPs that were particularly useful for the assignment of minor breeds that reached the lowest value of Out Of Bag error even in the Cinisara, whose value was quite high in all other panels. Moreover, this panel contained also the lowest number of SNPs in linkage disequilibrium. Several selected SNPs are located nearby genes affecting breed-specific phenotypic traits (coat colour and stature) or associated with production traits. In general, our results demonstrated the usefulness of Random Forest in combination to other reduction techniques to identify population informative SNPs.

Applications and cost benefits of sexed semen in pasture-based dairy production systems.

PubMed

Butler, S T; Hutchinson, I A; Cromie, A R; Shalloo, L

2014-05-01

Sexed semen technology is now commercially available in many countries around the world, and is primarily used in dairy cattle breeding. Sperm are sorted by flow cytometry on the basis of a 4% difference in DNA content between sperm containing X and Y chromosomes. Despite reliably producing a 90% gender bias, the fertility of the sexed semen product is compromised compared with conventional semen. The negative implications of the reduced fertility of sexed semen are amplified in seasonal systems of dairy production, as the importance of fertility is greater in these systems compared with year-round calving systems. A review of the literature indicates that conception rates (CR) to 1st service with frozen-thawed sexed semen are ~75% to 80% of those achieved with conventional frozen-thawed semen. Preliminary results from a large-scale field trial carried out in Ireland in 2013 suggest that significant improvements in the performance of sexed semen have been made, with CR of 87% of those achieved with conventional semen. The improved fertility of a sexed semen product that delivers a 90% gender bias has considerable implications for the future of breeding management in pasture-based dairy production systems. Sexed semen may facilitate faster, more profitable dairy herd expansion by increasing the number of dairy heifer replacements born. Biosecurity can be improved by maintaining a closed herd during the period of herd expansion. In a non-expansion scenario, sexed semen may be used to increase the value of beef output from the dairy herd. The replacement heifer requirements for a herd could be met by using sexed semen in the 1st 3 weeks of the breeding season, with the remaining animals bred to beef sires, increasing the sale value over that of a dairy bull calf. Alternatively, very short gestation sires could be used to shorten the calving interval. Market prices have a considerable effect on the economics of sexed semen use, and widespread use of sexed semen should be restricted to well managed herds that already achieve acceptable herd fertility performance.

Evaluation of the Accuracy of Conventional and Digital Impression Techniques for Implant Restorations.

PubMed

Moura, Renata Vasconcellos; Kojima, Alberto Noriyuki; Saraceni, Cintia Helena Coury; Bassolli, Lucas; Balducci, Ivan; Özcan, Mutlu; Mesquita, Alfredo Mikail Melo

2018-05-01

The increased use of CAD systems can generate doubt about the accuracy of digital impressions for angulated implants. The aim of this study was to evaluate the accuracy of different impression techniques, two conventional and one digital, for implants with and without angulation. We used a polyurethane cast that simulates the human maxilla according to ASTM F1839, and 6 tapered implants were installed with external hexagonal connections to simulate tooth positions 17, 15, 12, 23, 25, and 27. Implants 17 and 23 were placed with 15° of mesial angulation and distal angulation, respectively. Mini cone abutments were installed on these implants with a metal strap 1 mm in height. Conventional and digital impression procedures were performed on the maxillary master cast, and the implants were separated into 6 groups based on the technique used and measurement type: G1 - control, G2 - digital impression, G3 - conventional impression with an open tray, G4 - conventional impression with a closed tray, G5 - conventional impression with an open tray and a digital impression, and G6 - conventional impression with a closed tray and a digital impression. A statistical analysis was performed using two-way repeated measures ANOVA to compare the groups, and a Kruskal-Wallis test was conducted to analyze the accuracy of the techniques. No significant difference in the accuracy of the techniques was observed between the groups. Therefore, no differences were found among the conventional impression and the combination of conventional and digital impressions, and the angulation of the implants did not affect the accuracy of the techniques. All of the techniques exhibited trueness and had acceptable precision. The variation of the angle of the implants did not affect the accuracy of the techniques. © 2018 by the American College of Prosthodontists.

Use of partial least squares regression to impute SNP genotypes in Italian cattle breeds.

PubMed

Dimauro, Corrado; Cellesi, Massimo; Gaspa, Giustino; Ajmone-Marsan, Paolo; Steri, Roberto; Marras, Gabriele; Macciotta, Nicolò P P

2013-06-05

The objective of the present study was to test the ability of the partial least squares regression technique to impute genotypes from low density single nucleotide polymorphisms (SNP) panels i.e. 3K or 7K to a high density panel with 50K SNP. No pedigree information was used. Data consisted of 2093 Holstein, 749 Brown Swiss and 479 Simmental bulls genotyped with the Illumina 50K Beadchip. First, a single-breed approach was applied by using only data from Holstein animals. Then, to enlarge the training population, data from the three breeds were combined and a multi-breed analysis was performed. Accuracies of genotypes imputed using the partial least squares regression method were compared with those obtained by using the Beagle software. The impact of genotype imputation on breeding value prediction was evaluated for milk yield, fat content and protein content. In the single-breed approach, the accuracy of imputation using partial least squares regression was around 90 and 94% for the 3K and 7K platforms, respectively; corresponding accuracies obtained with Beagle were around 85% and 90%. Moreover, computing time required by the partial least squares regression method was on average around 10 times lower than computing time required by Beagle. Using the partial least squares regression method in the multi-breed resulted in lower imputation accuracies than using single-breed data. The impact of the SNP-genotype imputation on the accuracy of direct genomic breeding values was small. The correlation between estimates of genetic merit obtained by using imputed versus actual genotypes was around 0.96 for the 7K chip. Results of the present work suggested that the partial least squares regression imputation method could be useful to impute SNP genotypes when pedigree information is not available.

Divergence at the casein haplotypes in dairy and meat goat breeds.

PubMed

Küpper, Julia; Chessa, Stefania; Rignanese, Daniela; Caroli, Anna; Erhardt, Georg

2010-02-01

Casein genes have been proved to have an influence on milk properties, and are in addition appropriate for phylogeny studies. A large number of casein polymorphisms exist in goats, making their analysis quite complex. The four casein loci were analyzed by molecular techniques for genetic polymorphism detection in the two dairy goat breeds Bunte Deutsche Edelziege (BDE; n=96), Weisse Deutsche Edelziege (WDE; n=91), and the meat goat breed Buren (n=75). Of the 35 analyzed alleles, 18 were found in BDE, and 17 in Buren goats and WDE. In addition, a new allele was identified at the CSN1S1 locus in the BDE, showing a frequency of 0.05. This variant, named CSN1S1*A', is characterized by a t-->c transversion in intron 9. Linkage disequilibrium was found at the casein haplotype in all three breeds. A total of 30 haplotypes showed frequencies higher than 0.01. In the Buren breed only one haplotype showed a frequency higher than 0.1. The ancestral haplotype B-A-A-B (in the order: CSN1S1-CSN2-CSN1S2-CSN3) occurred in all three breeds, showing a very high frequency (>0.8) in the Buren.

Application of Genomic Technologies to the Breeding of Trees

PubMed Central

Badenes, Maria L.; Fernández i Martí, Angel; Ríos, Gabino; Rubio-Cabetas, María J.

2016-01-01

The recent introduction of next generation sequencing (NGS) technologies represents a major revolution in providing new tools for identifying the genes and/or genomic intervals controlling important traits for selection in breeding programs. In perennial fruit trees with long generation times and large sizes of adult plants, the impact of these techniques is even more important. High-throughput DNA sequencing technologies have provided complete annotated sequences in many important tree species. Most of the high-throughput genotyping platforms described are being used for studies of genetic diversity and population structure. Dissection of complex traits became possible through the availability of genome sequences along with phenotypic variation data, which allow to elucidate the causative genetic differences that give rise to observed phenotypic variation. Association mapping facilitates the association between genetic markers and phenotype in unstructured and complex populations, identifying molecular markers for assisted selection and breeding. Also, genomic data provide in silico identification and characterization of genes and gene families related to important traits, enabling new tools for molecular marker assisted selection in tree breeding. Deep sequencing of transcriptomes is also a powerful tool for the analysis of precise expression levels of each gene in a sample. It consists in quantifying short cDNA reads, obtained by NGS technologies, in order to compare the entire transcriptomes between genotypes and environmental conditions. The miRNAs are non-coding short RNAs involved in the regulation of different physiological processes, which can be identified by high-throughput sequencing of RNA libraries obtained by reverse transcription of purified short RNAs, and by in silico comparison with known miRNAs from other species. All together, NGS techniques and their applications have increased the resources for plant breeding in tree species, closing the former gap of genetic tools between trees and annual species. PMID:27895664

Density and habitat of breeding Swallow-tailed Kites in the lower Suwannee ecosystem, Florida

USGS Publications Warehouse

Sykes, P.W.; Kepler, C.B.; Litzenberger, K.L.; Sansing, H.R.; Lewis, E.T.R.; Hatfield, J.S.

1999-01-01

Historically the Swallow-tailed Kite (Elanoides forficatus) bred in the United States in at least 16 eastern states. Currently it is restricted to seven southeastern states, with most of its breeding range in Florida. Breeding Bird Surveys indicate a declining trend for this Neotropical migrant in most of Florida. Using a rapid survey technique at the Lower Suwannee NWR on 25-27 Mar. 1997, we scanned for kites from 16 sampling stations above the forest canopy, using 10X binoculars for 45 min per station. An effective detection distance of 2.4 km provided almost complete coverage of kite habitat (excluding salt marsh) on the refuge (14,620 ha) and in a 1.6-km buffer (13,526 ha). A mobile observation platform, extended to heights of 30-34 m provided an unobstructed view above the forest canopy where foraging bouts, feeding, courtship displays, and other activities by this species occur. This technique was found to be efficient in obtaining an estimate of potential breeding pairs. An estimated 19 breeding pairs were observed, with possibly five additional pairs, a density of at least one pair per 1173-1407 ha. There was no opportunity to search for nests so we were unable to correlate number of active nests with the number of kites observed, and linear nature of study area might concentrate birds, including nonbreeders, so our density of kites may or may not be typical for other areas. The refuge has a mosaic of 11 different habitats (7 forest types, freshwater and salt marshes, open water and urban/suburban) providing much linear edge to the matrix of different plant communities that range in height from less than 1 m to greater than 30 m. Such structure provides quality habitat for Swallow-tailed Kites.

Application of Genomic Technologies to the Breeding of Trees.

PubMed

Badenes, Maria L; Fernández I Martí, Angel; Ríos, Gabino; Rubio-Cabetas, María J

2016-01-01

The recent introduction of next generation sequencing (NGS) technologies represents a major revolution in providing new tools for identifying the genes and/or genomic intervals controlling important traits for selection in breeding programs. In perennial fruit trees with long generation times and large sizes of adult plants, the impact of these techniques is even more important. High-throughput DNA sequencing technologies have provided complete annotated sequences in many important tree species. Most of the high-throughput genotyping platforms described are being used for studies of genetic diversity and population structure. Dissection of complex traits became possible through the availability of genome sequences along with phenotypic variation data, which allow to elucidate the causative genetic differences that give rise to observed phenotypic variation. Association mapping facilitates the association between genetic markers and phenotype in unstructured and complex populations, identifying molecular markers for assisted selection and breeding. Also, genomic data provide in silico identification and characterization of genes and gene families related to important traits, enabling new tools for molecular marker assisted selection in tree breeding. Deep sequencing of transcriptomes is also a powerful tool for the analysis of precise expression levels of each gene in a sample. It consists in quantifying short cDNA reads, obtained by NGS technologies, in order to compare the entire transcriptomes between genotypes and environmental conditions. The miRNAs are non-coding short RNAs involved in the regulation of different physiological processes, which can be identified by high-throughput sequencing of RNA libraries obtained by reverse transcription of purified short RNAs, and by in silico comparison with known miRNAs from other species. All together, NGS techniques and their applications have increased the resources for plant breeding in tree species, closing the former gap of genetic tools between trees and annual species.

Avian nesting success and diversity in conventionally and organically managed apple orchards

USGS Publications Warehouse

Fluetsch, K.M.; Sparling, D.W.

1994-01-01

This study examines the effects of operational use of pesticides on avian species inhabiting apple orchards in Pennsylvania. Mourning dove (Zenaida rnacroura) and American robin (Turdus migratorius) nests were monitored in three organic and three conventional apple orchards during 1990 and 1991. In 1991 we surveyed the avian communities of these orchards by using line transects. Organophosphorus (OP) (e.g., azinphos-methyl, phosphamidon, parathion, dimethoate), carbamate (CA) (e.g., methomyl, formetanate, oxamyl), and organochlorine (endosulfan) pesticides, known to be highly toxic to birds, were sprayed individually or in mixtures as part of routine pest management as many as 19 times during peaks in breeding activity. Spray card tests revealed that OP pesticides were deposited on 86% of the nests in conventional orchards. Daily survival rates (DSRs) for nests of both species were higher in the organic orchards than in the conventional orchards for 1991 and for years combined (p < 0.05). Species diversity was greater in the organic orchards (H= 2.43) than in the conventional orchards (H=1.79). Repeated applications of pesticides within the conventional orchards reduced the reproductive success of doves and robins and may have lowered avian species diversity compared with organic orchards.

78 FR 79390 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-30

... technological collection techniques or other forms of information technology. Comments regarding this... collar or tattoo number; breed; age; sex; color; distinctive marks; vaccination history; and...

A Comparative Evaluation of the Effect of Double Casting Technique Using Functionally Generated Path and Conventional Single Casting with Respect to Functional Articulation, Patient Satisfaction and Chair Side Time, in Single Unit Molar Teeth: An In Vivo Study.

PubMed

Memon, Sarfaraz

2014-12-01

A stable centric occlusal position that shows no evidence of occlusal disease should not be altered. Confirmative restorative dentistry deals with making restorations that are in harmony with existing jaw relations. Conventional techniques for construction have been unsuccessful in producing a prosthesis that can be inserted without minor intraoral occlusal adjustment. This study was conducted to evaluate the benefits of the double casting technique with FGP over the conventional casting technique. Ten patients with root canal treated maxillary molar were selected for the fabrication of metal crown. Two techniques, one involving the conventional fabrication and other using functionally generated path with double casting were used to fabricate the prosthesis. A comparison based on various parameters which was done between the two techniques. The change in the height of castings for the double casting group was less compared to the conventional group and was highly statistically significant (P < 0.001). The time taken for occlusal correction was significantly lower in double casting group than the conventional group (P < 0.001). The patient satisfaction (before occlusal correction) indicated better satisfaction for double casting group compared to conventional (P < 0.01). The functionally generated path with double casting technique resulted in castings which had better dimensional accuracy, less occlusal correction and better patient satisfaction compared to the conventional castings.

Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes.

PubMed

Yuzbasioglu, Emir; Kurt, Hanefi; Turunc, Rana; Bilir, Halenur

2014-01-30

The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects' attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques.

Major and trace elements in organically or conventionally produced milk.

PubMed

Hermansen, John E; Badsberg, Jens H; Kristensen, Troels; Gundersen, Vagn

2005-08-01

A total of 480 samples of milk from 10 organically and 10 conventionally producing dairy farms in Denmark and covering 8 sampling periods over 1 year (triplicate samplings) were analysed for 45 trace elements and 6 major elements by high-resolution inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry. Sampling, sample preparation, and analysis of the samples were performed under carefully controlled contamination-free conditions. The dairy cattle breeds were Danish-Holstein or Jersey. Sources of variance were quantified, and differences between production systems and breeds were tested. The major source of variation for most elements was week of sampling. Concentrations of Al, Cu, Fe, Mo, Rb, Se, and Zn were within published ranges. Concentrations of As, Cd, Cr, Mn and Pb were lower, and concentrations of Co and Sr were higher than published ranges. Compared with Holsteins, Jerseys produced milk with higher concentrations of Ba, Ca, Cu, Fe, Mg, Mn, Mo, P, Rh, and Zn and with a lower concentration of Bi. The organically produced milk, compared with conventionally produced milk, contained a significantly higher concentration of Mo (48 v. 37 ng/g) and a lower concentration of Ba (43 v. 62 ng/g), Eu (4 v. 7 ng/g), Mn (16 v. 20 ng/g) and Zn (4400 v. 5150 ng/g respectively). The investigation yielded typical concentrations for the following trace elements in milk, for which no or very few data are available: Ba, Bi, Ce, Cs, Eu, Ga, Gd, In, La, Nb, Nd, Pd, Pr, Rh, Sb, Sm, Tb, Te, Th, Ti, Tl, U, V, Y, and Zr.

Evaluation of the marginal fit of metal copings fabricated on three different marginal designs using conventional and accelerated casting techniques: an in vitro study.

PubMed

Vaidya, Sharad; Parkash, Hari; Bhargava, Akshay; Gupta, Sharad

2014-01-01

Abundant resources and techniques have been used for complete coverage crown fabrication. Conventional investing and casting procedures for phosphate-bonded investments require a 2- to 4-h procedure before completion. Accelerated casting techniques have been used, but may not result in castings with matching marginal accuracy. The study measured the marginal gap and determined the clinical acceptability of single cast copings invested in a phosphate-bonded investment with the use of conventional and accelerated methods. One hundred and twenty cast coping samples were fabricated using conventional and accelerated methods, with three finish lines: Chamfer, shoulder and shoulder with bevel. Sixty copings were prepared with each technique. Each coping was examined with a stereomicroscope at four predetermined sites and measurements of marginal gaps were documented for each. A master chart was prepared for all the data and was analyzed using Statistical Package for the Social Sciences version. Evidence of marginal gap was then evaluated by t-test. Analysis of variance and Post-hoc analysis were used to compare two groups as well as to make comparisons between three subgroups . Measurements recorded showed no statistically significant difference between conventional and accelerated groups. Among the three marginal designs studied, shoulder with bevel showed the best marginal fit with conventional as well as accelerated casting techniques. Accelerated casting technique could be a vital alternative to the time-consuming conventional casting technique. The marginal fit between the two casting techniques showed no statistical difference.

Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness.

PubMed

Jadhav, Vivek Dattatray; Motwani, Bhagwan K; Shinde, Jitendra; Adhapure, Prasad

2017-01-01

The aim of this study was to evaluate the marginal fit and surface roughness of complete cast crowns made by a conventional and an accelerated casting technique. This study was divided into three parts. In Part I, the marginal fit of full metal crowns made by both casting techniques in the vertical direction was checked, in Part II, the fit of sectional metal crowns in the horizontal direction made by both casting techniques was checked, and in Part III, the surface roughness of disc-shaped metal plate specimens made by both casting techniques was checked. A conventional technique was compared with an accelerated technique. In Part I of the study, the marginal fit of the full metal crowns as well as in Part II, the horizontal fit of sectional metal crowns made by both casting techniques was determined, and in Part III, the surface roughness of castings made with the same techniques was compared. The results of the t -test and independent sample test do not indicate statistically significant differences in the marginal discrepancy detected between the two casting techniques. For the marginal discrepancy and surface roughness, crowns fabricated with the accelerated technique were significantly different from those fabricated with the conventional technique. Accelerated casting technique showed quite satisfactory results, but the conventional technique was superior in terms of marginal fit and surface roughness.

Impact of native plants on bird and butterfly biodiversity in suburban landscapes.

PubMed

Burghardt, Karin T; Tallamy, Douglas W; Gregory Shriver, W

2009-02-01

Managed landscapes in which non-native ornamental plants are favored over native vegetation now dominate the United States, particularly east of the Mississippi River. We measured how landscaping with native plants affects the avian and lepidopteran communities on 6 pairs of suburban properties in southeastern Pennsylvania. One property in each pair was landscaped entirely with native plants and the other exhibited a more conventional suburban mixture of plants--a native canopy with non-native groundcover and shrubs. Vegetation sampling confirmed that total plant cover and plant diversity did not differ between treatments, but non-native plant cover was greater on the conventional sites and native plant cover was greater on the native sites. Several avian (abundance, species richness, biomass, and breeding-bird abundance) and larval lepidopteran (abundance and species richness) community parameters were measured from June 2006 to August 2006. Native properties supported significantly more caterpillars and caterpillar species and significantly greater bird abundance, diversity, species richness, biomass, and breeding pairs of native species. Of particular importance is that bird species of regional conservation concern were 8 times more abundant and significantly more diverse on native properties. In our study area, native landscaping positively influenced the avian and lepidopteran carrying capacity of suburbia and provided a mechanism for reducing biodiversity losses in human-dominated landscapes.

Authentication of meat and meat products.

PubMed

Ballin, N Z

2010-11-01

In recent years, interest in meat authenticity has increased. Many consumers are concerned about the meat they eat and accurate labelling is important to inform consumer choice. Authentication methods can be categorised into the areas where fraud is most likely to occur: meat origin, meat substitution, meat processing treatment and non-meat ingredient addition. Within each area the possibilities for fraud can be subcategorised as follows: meat origin-sex, meat cuts, breed, feed intake, slaughter age, wild versus farmed meat, organic versus conventional meat, and geographic origin; meat substitution-meat species, fat, and protein; meat processing treatment-irradiation, fresh versus thawed meat and meat preparation; non-meat ingredient addition-additives and water. Analytical methods used in authentication are as diverse as the authentication problems, and include a diverse range of equipment and techniques. This review is intended to provide an overview of the possible analytical methods available for meat and meat products authentication. In areas where no authentication methods have been published, possible strategies are suggested. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

The politics of Golden Rice

PubMed Central

Dubock, Adrian

2014-01-01

Genetic knowledge applicable to crop improvement has erupted over the past 60 years, and the techniques of introducing genes from one organism to another have enabled new varieties of crops not achievable by previously available methodologies of crop breeding. Research and particularly development of these GMO-crops to a point where they are useful for growers and consumers in most countries is subject to complex national and international rules arising out of the UN's Cartagena Protocol on Biosafety to the Convention on Biological Diversity, with 167 country signatories. (The USA and Canada are not signatories.) The Protocol was developed based on concerns initially expressed in the 1970's that such technology presented unusual risks to man and the environment. Those ideas have comprehensively and authoritatively been proven to be wrong. The Protocol has nevertheless spawned significant regulatory obstacles to the development of GMO-crop technology at great cost to global society and in conflict with many other UN objectives. The suspicion induced by the Protocol is also widely used, overtly or covertly, for political purposes. These points are illustrated by reference to the not-for-profit Golden Rice project. PMID:25437240

The politics of Golden Rice.

PubMed

Dubock, Adrian

2014-07-03

Genetic knowledge applicable to crop improvement has erupted over the past 60 years, and the techniques of introducing genes from one organism to another have enabled new varieties of crops not achievable by previously available methodologies of crop breeding. Research and particularly development of these GMO-crops to a point where they are useful for growers and consumers in most countries is subject to complex national and international rules arising out of the UN's Cartagena Protocol on Biosafety to the Convention on Biological Diversity, with 167 country signatories. (The USA and Canada are not signatories.) The Protocol was developed based on concerns initially expressed in the 1970's that such technology presented unusual risks to man and the environment. Those ideas have comprehensively and authoritatively been proven to be wrong. The Protocol has nevertheless spawned significant regulatory obstacles to the development of GMO-crop technology at great cost to global society and in conflict with many other UN objectives. The suspicion induced by the Protocol is also widely used, overtly or covertly, for political purposes. These points are illustrated by reference to the not-for-profit Golden Rice project.

The development of a specific pathogen free (SPF) barrier colony of marmosets (Callithrix jacchus) for aging research

PubMed Central

Ross, Corinna N.; Austad, Steven; Brasky, Kathy; Brown, Celeste J.; Forney, Larry J.; Gelfond, Jonathan A.; Lanford, Robert; Richardson, Arlan; Tardif, Suzette D.

2017-01-01

A specific pathogen free (SPF) barrier colony of breeding marmosets (Callithrix jacchus) was established at the Barshop Institute for Longevity and Aging Studies. Rodent and other animal models maintained as SPF barrier colonies have demonstrated improved health and lengthened lifespans enhancing the quality and repeatability of aging research. The marmosets were screened for two viruses and several bacterial pathogens prior to establishing the new SPF colony. Twelve founding animals successfully established a breeding colony with increased reproductive success, improved health parameters, and increased median lifespan when compared to a conventionally housed, open colony. The improved health and longevity of marmosets from the SPF barrier colony suggests that such management can be used to produce a unique resource for future studies of aging processes in a nonhuman primate model. PMID:29227963

[Breeding and management of mycobacteria-free guinea pigs (author's transl)].

PubMed

Kazda, J

1976-08-01

A number of mycobacterial species are detectable under conventional holding condition of guinea pigs. These mycobacteria originating in drinking water and litter caused cross reactions in the Jones-Mote hypersensitivity test. Using suitable precautions it was possible to breed and hold the animals mycobacteria-free. The precautions depend mainly in alteration of the wire mesh floor in cages to avoide the contact of the animals with the litter, in cleaning and desinfection of water bottles, in using of heated water and food and in the prevention of mycobacterial contamination from the staff. The control examination on mycobacteria without treating is given in details. Cases are refered in which a oral rece ption of mycobacteria can alter the immune response. The modification of guinea pigs management to the mycobacteria-free ones is possible in a short time and with minimal cost.

Breeding blueberries for a changing global environment: a review

PubMed Central

Lobos, Gustavo A.; Hancock, James F.

2015-01-01

Today, blueberries are recognized worldwide as one of the foremost health foods, becoming one of the crops with the highest productive and commercial projections. Over the last 100 years, the geographical area where highbush blueberries are grown has extended dramatically into hotter and drier environments. The expansion of highbush blueberry growing into warmer regions will be challenged in the future by increases in average global temperature and extreme fluctuations in temperature and rainfall patterns. Considerable genetic variability exists within the blueberry gene pool that breeders can use to meet these challenges, but traditional selection techniques can be slow and inefficient and the precise adaptations of genotypes often remain hidden. Marker assisted breeding (MAB) and phenomics could aid greatly in identifying those individuals carrying adventitious traits, increasing selection efficiency and shortening the rate of cultivar release. While phenomics have begun to be used in the breeding of grain crops in the last 10 years, their use in fruit breeding programs it is almost non-existent. PMID:26483803

Bridging the gap between genome analysis and precision breeding in potato.

PubMed

Gebhardt, Christiane

2013-04-01

Efficiency and precision in plant breeding can be enhanced by using diagnostic DNA-based markers for the selection of superior cultivars. This technique has been applied to many crops, including potatoes. The first generation of diagnostic DNA-based markers useful in potato breeding were enabled by several developments: genetic linkage maps based on DNA polymorphisms, linkage mapping of qualitative and quantitative agronomic traits, cloning and functional analysis of genes for pathogen resistance and genes controlling plant metabolism, and association genetics in collections of tetraploid varieties and advanced breeding clones. Although these have led to significant improvements in potato genetics, the prediction of most, if not all, natural variation in agronomic traits by diagnostic markers ultimately requires the identification of the causal genes and their allelic variants. This objective will be facilitated by new genomic tools, such as genomic resequencing and comparative profiling of the proteome, transcriptome, and metabolome in combination with phenotyping genetic materials relevant for variety development. Copyright © 2012 Elsevier Ltd. All rights reserved.

Searching for an Accurate Marker-Based Prediction of an Individual Quantitative Trait in Molecular Plant Breeding

PubMed Central

Fu, Yong-Bi; Yang, Mo-Hua; Zeng, Fangqin; Biligetu, Bill

2017-01-01

Molecular plant breeding with the aid of molecular markers has played an important role in modern plant breeding over the last two decades. Many marker-based predictions for quantitative traits have been made to enhance parental selection, but the trait prediction accuracy remains generally low, even with the aid of dense, genome-wide SNP markers. To search for more accurate trait-specific prediction with informative SNP markers, we conducted a literature review on the prediction issues in molecular plant breeding and on the applicability of an RNA-Seq technique for developing function-associated specific trait (FAST) SNP markers. To understand whether and how FAST SNP markers could enhance trait prediction, we also performed a theoretical reasoning on the effectiveness of these markers in a trait-specific prediction, and verified the reasoning through computer simulation. To the end, the search yielded an alternative to regular genomic selection with FAST SNP markers that could be explored to achieve more accurate trait-specific prediction. Continuous search for better alternatives is encouraged to enhance marker-based predictions for an individual quantitative trait in molecular plant breeding. PMID:28729875

Carbon isotope turnover as a measure of arrival time in migratory birds

USGS Publications Warehouse

Oppel, Steffen; Powell, Abby N.

2009-01-01

Arrival time on breeding or non-breeding areas is of interest in many ecological studies exploring fitness consequences of migratory schedules. However, in most field studies, it is difficult to precisely assess arrival time of individuals. Here, we use carbon isotope turnover in avian blood as a technique to estimate arrival time for birds switching from one habitat or environment to another. Stable carbon isotope ratios (δ13C) in blood assimilate to a new equilibrium following a diet switch according to an exponential decay function. This relationship can be used to determine the time a diet switch occurred if δ13C of both the old and new diet are known. We used published data of captive birds to validate that this approach provides reliable estimates of the time since a diet switch within 1–3 weeks after the diet switch. We then explored the utility of this technique for King Eiders (Somateria spectabilis) arriving on terrestrial breeding grounds after wintering and migration at sea. We estimated arrival time on breeding grounds in northern Alaska (95% CI) from red blood cell δ13C turnover to be 4–9 June. This estimate overlapped with arrival time of birds from the same study site tracked with satellite transmitters (5–12 June). Therefore, we conclude that this method provides a simple yet reliable way to assess arrival time of birds moving between isotopically distinct environments.

Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

PubMed Central

2014-01-01

Background The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Methods Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects’ attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. Results There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Conclusions Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques. PMID:24479892

An evaluation of student and clinician perception of digital and conventional implant impressions.

PubMed

Lee, Sang J; Macarthur, Robert X; Gallucci, German O

2013-11-01

The accuracy and efficiency of digital implant impressions should match conventional impressions. Comparisons should be made with clinically relevant data. The purpose of this study was to evaluate the difficulty level and operator's perception between dental students and experienced clinicians when making digital and conventional implant impressions. Thirty experienced dental professionals and 30 second-year dental students made conventional and digital impressions of a single implant model. A visual analog scale (VAS) and multiple-choice questionnaires were used to assess the participant's perception of difficulty, preference, and effectiveness. Wilcoxon signed-rank test within the groups and Wilcoxon rank-sum test between the groups were used for statistical analysis (α=.05). On a 0 to 100 VAS, the student group scored a mean difficulty level of 43.1 (±18.5) for the conventional impression technique and 30.6 (±17.6) for the digital impression technique (P=.006). The clinician group scored a mean (standard deviation) difficulty level of 30.9 (±19.6) for conventional impressions and 36.5 (±20.6) for digital impressions (P=.280). Comparison between groups showed a mean difficulty level with the conventional impression technique significantly higher in the student group (P=.030). The digital impression was not significantly different between the groups (P=.228). Sixty percent of the students preferred the digital impression and 7% the conventional impression; 33% expressed no preference. In the clinician group, 33% preferred the digital impression and 37% the conventional impression; 30% had no preference. Seventy-seven percent of the student group felt most effective with digital impressions, 10% with conventional impressions, and 13% with either technique, whereas 40% of the clinician group chose the digital impression as the most effective technique, 53% the conventional impression, and 7% either technique. The conventional impression was more difficult to perform for the student group than the clinician group; however, the difficulty level of the digital impression was the same in both groups. It was also determined that the student group preferred the digital impression as the most efficient impression technique, and the clinician group had an even distribution in the choice of preferred and efficient impression techniques. Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Accuracy of prediction of genomic breeding values for residual feed intake and carcass and meat quality traits in Bos taurus, Bos indicus, and composite beef cattle.

PubMed

Bolormaa, S; Pryce, J E; Kemper, K; Savin, K; Hayes, B J; Barendse, W; Zhang, Y; Reich, C M; Mason, B A; Bunch, R J; Harrison, B E; Reverter, A; Herd, R M; Tier, B; Graser, H-U; Goddard, M E

2013-07-01

The aim of this study was to assess the accuracy of genomic predictions for 19 traits including feed efficiency, growth, and carcass and meat quality traits in beef cattle. The 10,181 cattle in our study had real or imputed genotypes for 729,068 SNP although not all cattle were measured for all traits. Animals included Bos taurus, Brahman, composite, and crossbred animals. Genomic EBV (GEBV) were calculated using 2 methods of genomic prediction [BayesR and genomic BLUP (GBLUP)] either using a common training dataset for all breeds or using a training dataset comprising only animals of the same breed. Accuracies of GEBV were assessed using 5-fold cross-validation. The accuracy of genomic prediction varied by trait and by method. Traits with a large number of recorded and genotyped animals and with high heritability gave the greatest accuracy of GEBV. Using GBLUP, the average accuracy was 0.27 across traits and breeds, but the accuracies between breeds and between traits varied widely. When the training population was restricted to animals from the same breed as the validation population, GBLUP accuracies declined by an average of 0.04. The greatest decline in accuracy was found for the 4 composite breeds. The BayesR accuracies were greater by an average of 0.03 than GBLUP accuracies, particularly for traits with known genes of moderate to large effect mutations segregating. The accuracies of 0.43 to 0.48 for IGF-I traits were among the greatest in the study. Although accuracies are low compared with those observed in dairy cattle, genomic selection would still be beneficial for traits that are hard to improve by conventional selection, such as tenderness and residual feed intake. BayesR identified many of the same quantitative trait loci as a genomewide association study but appeared to map them more precisely. All traits appear to be highly polygenic with thousands of SNP independently associated with each trait.

A Review of Microsatellite Markers and Their Applications in Rice Breeding Programs to Improve Blast Disease Resistance

PubMed Central

Miah, Gous; Rafii, Mohd Y.; Ismail, Mohd R.; Puteh, Adam B.; Rahim, Harun A.; Islam, Kh. Nurul; Latif, Mohammad Abdul

2013-01-01

Over the last few decades, the use of molecular markers has played an increasing role in rice breeding and genetics. Of the different types of molecular markers, microsatellites have been utilized most extensively, because they can be readily amplified by PCR and the large amount of allelic variation at each locus. Microsatellites are also known as simple sequence repeats (SSR), and they are typically composed of 1–6 nucleotide repeats. These markers are abundant, distributed throughout the genome and are highly polymorphic compared with other genetic markers, as well as being species-specific and co-dominant. For these reasons, they have become increasingly important genetic markers in rice breeding programs. The evolution of new biotypes of pests and diseases as well as the pressures of climate change pose serious challenges to rice breeders, who would like to increase rice production by introducing resistance to multiple biotic and abiotic stresses. Recent advances in rice genomics have now made it possible to identify and map a number of genes through linkage to existing DNA markers. Among the more noteworthy examples of genes that have been tightly linked to molecular markers in rice are those that confer resistance or tolerance to blast. Therefore, in combination with conventional breeding approaches, marker-assisted selection (MAS) can be used to monitor the presence or lack of these genes in breeding populations. For example, marker-assisted backcross breeding has been used to integrate important genes with significant biological effects into a number of commonly grown rice varieties. The use of cost-effective, finely mapped microsatellite markers and MAS strategies should provide opportunities for breeders to develop high-yield, blast resistance rice cultivars. The aim of this review is to summarize the current knowledge concerning the linkage of microsatellite markers to rice blast resistance genes, as well as to explore the use of MAS in rice breeding programs aimed at improving blast resistance in this species. We also discuss the various advantages, disadvantages and uses of microsatellite markers relative to other molecular marker types. PMID:24240810

Toward Genomics-Based Breeding in C3 Cool-Season Perennial Grasses.

PubMed

Talukder, Shyamal K; Saha, Malay C

2017-01-01

Most important food and feed crops in the world belong to the C3 grass family. The future of food security is highly reliant on achieving genetic gains of those grasses. Conventional breeding methods have already reached a plateau for improving major crops. Genomics tools and resources have opened an avenue to explore genome-wide variability and make use of the variation for enhancing genetic gains in breeding programs. Major C3 annual cereal breeding programs are well equipped with genomic tools; however, genomic research of C3 cool-season perennial grasses is lagging behind. In this review, we discuss the currently available genomics tools and approaches useful for C3 cool-season perennial grass breeding. Along with a general review, we emphasize the discussion focusing on forage grasses that were considered orphan and have little or no genetic information available. Transcriptome sequencing and genotype-by-sequencing technology for genome-wide marker detection using next-generation sequencing (NGS) are very promising as genomics tools. Most C3 cool-season perennial grass members have no prior genetic information; thus NGS technology will enhance collinear study with other C3 model grasses like Brachypodium and rice. Transcriptomics data can be used for identification of functional genes and molecular markers, i.e., polymorphism markers and simple sequence repeats (SSRs). Genome-wide association study with NGS-based markers will facilitate marker identification for marker-assisted selection. With limited genetic information, genomic selection holds great promise to breeders for attaining maximum genetic gain of the cool-season C3 perennial grasses. Application of all these tools can ensure better genetic gains, reduce length of selection cycles, and facilitate cultivar development to meet the future demand for food and fodder.

Persistency of accuracy of genomic breeding values for different simulated pig breeding programs in developing countries.

PubMed

Akanno, E C; Schenkel, F S; Sargolzaei, M; Friendship, R M; Robinson, J A B

2014-10-01

Genetic improvement of pigs in tropical developing countries has focused on imported exotic populations which have been subjected to intensive selection with attendant high population-wide linkage disequilibrium (LD). Presently, indigenous pig population with limited selection and low LD are being considered for improvement. Given that the infrastructure for genetic improvement using the conventional BLUP selection methods are lacking, a genome-wide selection (GS) program was proposed for developing countries. A simulation study was conducted to evaluate the option of using 60 K SNP panel and observed amount of LD in the exotic and indigenous pig populations. Several scenarios were evaluated including different size and structure of training and validation populations, different selection methods and long-term accuracy of GS in different population/breeding structures and traits. The training set included previously selected exotic population, unselected indigenous population and their crossbreds. Traits studied included number born alive (NBA), average daily gain (ADG) and back fat thickness (BFT). The ridge regression method was used to train the prediction model. The results showed that accuracies of genomic breeding values (GBVs) in the range of 0.30 (NBA) to 0.86 (BFT) in the validation population are expected if high density marker panels are utilized. The GS method improved accuracy of breeding values better than pedigree-based approach for traits with low heritability and in young animals with no performance data. Crossbred training population performed better than purebreds when validation was in populations with similar or a different structure as in the training set. Genome-wide selection holds promise for genetic improvement of pigs in the tropics. © 2014 Blackwell Verlag GmbH.

Accounting for Genotype-by-Environment Interactions and Residual Genetic Variation in Genomic Selection for Water-Soluble Carbohydrate Concentration in Wheat.

PubMed

Ovenden, Ben; Milgate, Andrew; Wade, Len J; Rebetzke, Greg J; Holland, James B

2018-05-31

Abiotic stress tolerance traits are often complex and recalcitrant targets for conventional breeding improvement in many crop species. This study evaluated the potential of genomic selection to predict water-soluble carbohydrate concentration (WSCC), an important drought tolerance trait, in wheat under field conditions. A panel of 358 varieties and breeding lines constrained for maturity was evaluated under rainfed and irrigated treatments across two locations and two years. Whole-genome marker profiles and factor analytic mixed models were used to generate genomic estimated breeding values (GEBVs) for specific environments and environment groups. Additive genetic variance was smaller than residual genetic variance for WSCC, such that genotypic values were dominated by residual genetic effects rather than additive breeding values. As a result, GEBVs were not accurate predictors of genotypic values of the extant lines, but GEBVs should be reliable selection criteria to choose parents for intermating to produce new populations. The accuracy of GEBVs for untested lines was sufficient to increase predicted genetic gain from genomic selection per unit time compared to phenotypic selection if the breeding cycle is reduced by half by the use of GEBVs in off-season generations. Further, genomic prediction accuracy depended on having phenotypic data from environments with strong correlations with target production environments to build prediction models. By combining high-density marker genotypes, stress-managed field evaluations, and mixed models that model simultaneously covariances among genotypes and covariances of complex trait performance between pairs of environments, we were able to train models with good accuracy to facilitate genetic gain from genomic selection. Copyright © 2018 Ovenden et al.

Targeted mutagenesis using zinc-finger nucleases in perennial fruit trees.

PubMed

Peer, Reut; Rivlin, Gil; Golobovitch, Sara; Lapidot, Moshe; Gal-On, Amit; Vainstein, Alexander; Tzfira, Tzvi; Flaishman, Moshe A

2015-04-01

Targeting a gene in apple or fig with ZFN, introduced by transient or stable transformation, should allow genome editing with high precision to advance basic science and breeding programs. Genome editing is a powerful tool for precise gene manipulation in any organism; it has recently been shown to be of great value for annual plants. Classical breeding strategies using conventional cross-breeding and induced mutations have played an important role in the development of new cultivars in fruit trees. However, fruit-tree breeding is a lengthy process with many limitations. Efficient and widely applied methods for targeted modification of fruit-tree genomes are not yet available. In this study, transgenic apple and fig lines carrying a zinc-finger nuclease (ZFNs) under the control of a heat-shock promoter were developed. Editing of a mutated uidA gene, following expression of the ZFN genes by heat shock, was confirmed by GUS staining and PCR product sequencing. Finally, whole plants with a repaired uidA gene due to deletion of a stop codon were regenerated. The ZFN-mediated gene modifications were stable and passed onto regenerants from ZFN-treated tissue cultures. This is the first demonstration of efficient and precise genome editing, using ZFN at a specific genomic locus, in two different perennial fruit trees-apple and fig. We conclude that targeting a gene in apple or fig with a ZFN introduced by transient or stable transformation should allow knockout of a gene of interest. Using this technology for genome editing allows for marker gene-independent and antibiotic selection-free genome engineering with high precision in fruit trees to advance basic science as well as nontransgenic breeding programs.

Investment, regulation, and uncertainty: managing new plant breeding techniques.

PubMed

Smyth, Stuart J; McDonald, Jillian; Falck-Zepeda, Jose

2014-01-01

As with any technological innovation, time refines the technology, improving upon the original version of the innovative product. The initial GM crops had single traits for either herbicide tolerance or insect resistance. Current varieties have both of these traits stacked together and in many cases other abiotic and biotic traits have also been stacked. This innovation requires investment. While this is relatively straight forward, certain conditions need to exist such that investments can be facilitated. The principle requirement for investment is that regulatory frameworks render consistent and timely decisions. If the certainty of regulatory outcomes weakens, the potential for changes in investment patterns increases.   This article provides a summary background to the leading plant breeding technologies that are either currently being used to develop new crop varieties or are in the pipeline to be applied to plant breeding within the next few years. Challenges for existing regulatory systems are highlighted. Utilizing an option value approach from investment literature, an assessment of uncertainty regarding the regulatory approval for these varying techniques is undertaken. This research highlights which technology development options have the greatest degree of uncertainty and hence, which ones might be expected to see an investment decline.

Determination of non-market values to inform conservation strategies for the threatened Alistana-Sanabresa cattle breed.

PubMed

Martin-Collado, D; Diaz, C; Drucker, A G; Carabaño, M J; Zander, K K

2014-08-01

Livestock breed-related public good functions are often used to justify support for endangered breed conservation despite the fact that little is known about such non-market values. We show how stated preference techniques can be used to assess the non-market values that people place on livestock breeds. Through the application of a case study choice experiment survey in Zamora province, Spain, the total economic value (TEV) of the threatened Alistana-Sanabresa (AS) cattle breed was investigated. An analysis of the relative importance of the non-market components of its TEV and an assessment of the socio-economic variables that influence people's valuation of such components is used to inform conservation strategy design. Overall, the findings reveal that the AS breed had significant non-market values associated with it and that the value that respondents placed on each specific public good function also varied significantly. Functions related with indirect use cultural and existence values were much more highly valued than landscape maintenance values. These high cultural and existence values (totalling over 80% of TEV) suggest that an AS in situ conservation strategy will be required to secure such values. As part of such a strategy, incentive mechanisms will be needed to permit farmers to capture some of these public good values and thus be able to afford to maintain breed population numbers at socially desirable levels. One such mechanism could be related to the development of breed-related agritourism initiatives, with a view to enhancing private good values and providing an important addition to continued direct support. Where linked with cultural dimensions, niche product market development, including through improving AS breed-related product quality and brand recognition may also have a role to play as part of such an overall conservation and use strategy. We conclude that livestock breed conservation strategies with the highest potential to maximise societal welfare would be those that secure the breed-related functions that people value most, with appropriate in situ conservation interventions and strategies being identified accordingly.

Quality assessment of tomato landraces and virus-resistant breeding lines: quick estimation by near infrared reflectance spectroscopy.

PubMed

García-Martínez, Santiago; Gálvez-Sola, Luis N; Alonso, Arantxa; Agulló, Enrique; Rubio, Fernando; Ruiz, Juan J; Moral, Raúl

2012-04-01

Several tomato landraces are very popular in south-eastern Spain for their organoleptic fruit quality, but these cultivars are highly susceptible to several viruses. A breeding programme is being carried out for the introduction of virus resistances into these landraces. In the last steps of our breeding programme a high number of breeding lines must be evaluated for agronomic and organoleptic quality parameters. Near infrared reflectance spectroscopy (NIRS) technology shows considerable promise and is ideally suited to the requirements of breeders. Significant differences between a set of 35 tomato breeding lines, seven landraces and one commercial hybrid were observed for quality and mineral content parameters, suggesting that there are considerable levels of genetic diversity between the cultivar groups studied. Using NIRS on dry samples of tomato constitutes a feasible technique to estimate the content of several minerals (C, N, P, K, Ca, Na, Mn, Mg and Cu) according to the coefficient of determination for calibration (R(2) > 0.90). NIRS estimations of soluble solids content and titratable acidity obtained were considered useful only for general screening purposes. NIRS technology may be a useful tool in the selection of lines coming out of tomato breeding programs, allowing a quick estimation of mineral content. However, the estimation of soluble solids content and titratable acidity by NIRS must be improved. Copyright © 2011 Society of Chemical Industry.

Current patents and future development underlying marker-assisted breeding in major grain crops.

PubMed

Utomo, Herry S; Linscombe, Steve D

2009-01-01

Genomics and molecular markers provide new tools to assemble and mobilize important traits from different genetic backgrounds, including breeding lines and cultivars from different parts of the world and their related wild ancestors, to improve the quality and yield of the existing commercial cultivars to meet the increasing challenges of global food demand. The basic techniques of marker-assisted breeding, such as isolating DNA, amplifying DNA of interest using publicly available primers, and visualizing DNA fragments using standard polyacrylamid gel, have been described in the literature and, therefore, are available to scientists and breeders without any restrictions. A more sophisticated high-throughput system that includes proprietary chemicals and reagents, parts and equipments, software, and methods or processes, has been a subject of intensive patents and trade secrets. The high-throughput systems offer a more efficient way to discover associated QTLs for traits of economic importance. Therefore, an increasing number of patents of highly valued genes and QTLs is expected. This paper will discuss and review current patents associated with genes and QTLs utilized in marker-assisted breeding in major grain crops. The availability of molecular markers for important agronomic traits combined with more efficient marker detection systems will help reach the full benefit of MAS in the breeding effort to reassemble potential genes and recapture critical genes among the breeding lines that were lost during domestication to help boost crop production worldwide.

Application of a new IBD-based QTL mapping method to common wheat breeding population: analysis of kernel hardness and dough strength.

PubMed

Crepieux, Sebastien; Lebreton, Claude; Flament, Pascal; Charmet, Gilles

2005-11-01

Mapping quantitative trait loci (QTL) in plants is usually conducted using a population derived from a cross between two inbred lines. The power of such QTL detection and the estimation of the effects highly depend on the choice of the two parental lines. Thus, the QTL found represent only a small part of the genetic architecture and can be of limited economical interest in marker-assisted selection. On the other hand, applied breeding programmes evaluate large numbers of progeny derived from multiple-related crosses for a wide range of agronomic traits. It is assumed that the development of statistical techniques to deal with pedigrees in existing plant populations would increase the relevance and cost effectiveness of QTL mapping in a breeding context. In this study, we applied a two-step IBD-based-variance component method to a real wheat breeding population, composed of 374 F6 lines derived from 80 different parents. Two bread wheat quality related traits were analysed by the method. Results obtained show very close agreement with major genes and QTL already known for those two traits. With this new QTL mapping strategy, inferences about QTL can be drawn across the breeding programme rather than being limited to the sample of progeny from a single cross and thus the use of the detected QTL in assisting breeding would be facilitated.

A new Method for the Estimation of Initial Condition Uncertainty Structures in Mesoscale Models

NASA Astrophysics Data System (ADS)

Keller, J. D.; Bach, L.; Hense, A.

2012-12-01

The estimation of fast growing error modes of a system is a key interest of ensemble data assimilation when assessing uncertainty in initial conditions. Over the last two decades three methods (and variations of these methods) have evolved for global numerical weather prediction models: ensemble Kalman filter, singular vectors and breeding of growing modes (or now ensemble transform). While the former incorporates a priori model error information and observation error estimates to determine ensemble initial conditions, the latter two techniques directly address the error structures associated with Lyapunov vectors. However, in global models these structures are mainly associated with transient global wave patterns. When assessing initial condition uncertainty in mesoscale limited area models, several problems regarding the aforementioned techniques arise: (a) additional sources of uncertainty on the smaller scales contribute to the error and (b) error structures from the global scale may quickly move through the model domain (depending on the size of the domain). To address the latter problem, perturbation structures from global models are often included in the mesoscale predictions as perturbed boundary conditions. However, the initial perturbations (when used) are often generated with a variant of an ensemble Kalman filter which does not necessarily focus on the large scale error patterns. In the framework of the European regional reanalysis project of the Hans-Ertel-Center for Weather Research we use a mesoscale model with an implemented nudging data assimilation scheme which does not support ensemble data assimilation at all. In preparation of an ensemble-based regional reanalysis and for the estimation of three-dimensional atmospheric covariance structures, we implemented a new method for the assessment of fast growing error modes for mesoscale limited area models. The so-called self-breeding is development based on the breeding of growing modes technique. Initial perturbations are integrated forward for a short time period and then rescaled and added to the initial state again. Iterating this rapid breeding cycle provides estimates for the initial uncertainty structure (or local Lyapunov vectors) given a specific norm. To avoid that all ensemble perturbations converge towards the leading local Lyapunov vector we apply an ensemble transform variant to orthogonalize the perturbations in the sub-space spanned by the ensemble. By choosing different kind of norms to measure perturbation growth, this technique allows for estimating uncertainty patterns targeted at specific sources of errors (e.g. convection, turbulence). With case study experiments we show applications of the self-breeding method for different sources of uncertainty and different horizontal scales.

Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness

PubMed Central

Jadhav, Vivek Dattatray; Motwani, Bhagwan K.; Shinde, Jitendra; Adhapure, Prasad

2017-01-01

Aims: The aim of this study was to evaluate the marginal fit and surface roughness of complete cast crowns made by a conventional and an accelerated casting technique. Settings and Design: This study was divided into three parts. In Part I, the marginal fit of full metal crowns made by both casting techniques in the vertical direction was checked, in Part II, the fit of sectional metal crowns in the horizontal direction made by both casting techniques was checked, and in Part III, the surface roughness of disc-shaped metal plate specimens made by both casting techniques was checked. Materials and Methods: A conventional technique was compared with an accelerated technique. In Part I of the study, the marginal fit of the full metal crowns as well as in Part II, the horizontal fit of sectional metal crowns made by both casting techniques was determined, and in Part III, the surface roughness of castings made with the same techniques was compared. Statistical Analysis Used: The results of the t-test and independent sample test do not indicate statistically significant differences in the marginal discrepancy detected between the two casting techniques. Results: For the marginal discrepancy and surface roughness, crowns fabricated with the accelerated technique were significantly different from those fabricated with the conventional technique. Conclusions: Accelerated casting technique showed quite satisfactory results, but the conventional technique was superior in terms of marginal fit and surface roughness. PMID:29042726

Chlorophyll fluorescence emission as a reporter on cold tolerance in Arabidopsis thaliana accessions

PubMed Central

Mishra, Anamika; Höermiller, Imke I; Heyer, Arnd G; Nedbal, Ladislav

2011-01-01

Non-invasive, high-throughput screening methods are valuable tools in breeding for abiotic stress tolerance in plants. Optical signals such as chlorophyll fluorescence emission can be instrumental in developing new screening techniques. In order to examine the potential of chlorophyll fluorescence to reveal plant tolerance to low temperatures, we used a collection of nine Arabidopsis thaliana accessions and compared their fluorescence features with cold tolerance quantified by the well established electrolyte leakage method on detached leaves. We found that, during progressive cooling, the minimal chlorophyll fluorescence emission rose strongly and that this rise was highly dependent on the cold tolerance of the accessions. Maximum quantum yield of PSII photochemistry and steady state fluorescence normalized to minimal fluorescence were also highly correlated to the cold tolerance measured by the electrolyte leakage method. In order to further increase the capacity of the fluorescence detection to reveal the low temperature tolerance, we applied combinatorial imaging that employs plant classification based on multiple fluorescence features. We found that this method, by including the resolving power of several fluorescence features, can be well employed to detect cold tolerance already at mild sub-zero temperatures. Therefore, there is no need to freeze the screened plants to the largely damaging temperatures of around −15°C. This, together with the method's easy applicability, represents a major advantage of the fluorescence technique over the conventional electrolyte leakage method. PMID:21427532

Using naturally shed feathers for individual identification, genetic parentage analyses, and population monitoring in an endangered Eastern imperial eagle (Aquila heliaca) population from Kazakhstan.

PubMed

Rudnick, Jamie A; Katzner, Todd E; Bragin, Evgeny A; Rhodes, O Eugene; DeWoody, J Andrew

2005-09-01

Genetic analyses on noninvasively collected samples have revolutionized how populations are monitored. Most noninvasive monitoring studies have used hair or scat for individual identification of elusive mammals, but here we utilize naturally shed feathers. The Eastern imperial eagle (EIE) is a species of conservation concern throughout Central Asia and, like most raptors, EIEs are inherently challenging to study because adults are difficult to capture and band using conventional techniques. Over 6 years, we noninvasively collected hundreds of adult feathers and directly sampled EIE chicks at a national nature reserve in Kazakhstan. All samples were genetically sexed and genotyped at a suite of microsatellite loci. Genetically profiled adult feathers identified and monitored the presence of individual eagles over time, enabling us to address a variety of issues related to the biology, demography, and conservation of EIEs. Specifically, we characterized (i) the genetic mating system, (ii) relatedness among mated pairs, (iii) chick sex ratios, and (iv) annual turnover in an adult breeding population. We show that EIEs are genetically monogamous and furthermore, there is no apparent relatedness-based system of mate choice (e.g. inbreeding avoidance). Results indicate that annual adult EIE survivorship (84%) is lower than expected for a long-lived raptor, but initial analyses suggest the current reproductive rate at our study site is sufficient to maintain a stable breeding population. The pristine habitat at our study site supports an EIE population that is probably the most demographically robust in the world; thus, our results caution that populations in marginal habitats may not be self-sustaining.

Comparison of the fit of cast gold crowns fabricated from the digital and the conventional impression techniques

PubMed Central

Jeon, Young-Chan; Jeong, Chang-Mo

2017-01-01

PURPOSE The purpose of this study was to compare the fit of cast gold crowns fabricated from the conventional and the digital impression technique. MATERIALS AND METHODS Artificial tooth in a master model and abutment teeth in ten patients were restored with cast gold crowns fabricated from the digital and the conventional impression technique. The forty silicone replicas were cut in three sections; each section was evaluated in nine points. The measurement was carried out by using a measuring microscope and I-Soultion. Data from the silicone replica were analyzed and all tests were performed with α-level of 0.05. RESULTS 1. The average gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly. 2. In marginal and internal axial gap of cast gold crowns, no statistical differences were found between the two impression techniques. 3. The internal occlusal gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly. CONCLUSION Both prostheses presented clinically acceptable results with comparing the fit. The prostheses fabricated from the digital impression technique showed more gaps, in respect of occlusal surface. PMID:28243386

Breeding and Domesticating Crops Adapted to Drought and Salinity: A New Paradigm for Increasing Food Production

PubMed Central

Fita, Ana; Rodríguez-Burruezo, Adrián; Boscaiu, Monica; Prohens, Jaime; Vicente, Oscar

2015-01-01

World population is expected to reach 9.2 × 109 people by 2050. Feeding them will require a boost in crop productivity using innovative approaches. Current agricultural production is very dependent on large amounts of inputs and water availability is a major limiting factor. In addition, the loss of genetic diversity and the threat of climate change make a change of paradigm in plant breeding and agricultural practices necessary. Average yields in all major crops are only a small fraction of record yields, and drought and soil salinity are the main factors responsible for yield reduction. Therefore there is the need to enhance crop productivity by improving crop adaptation. Here we review the present situation and propose the development of crops tolerant to drought and salt stress for addressing the challenge of dramatically increasing food production in the near future. The success in the development of crops adapted to drought and salt depends on the efficient and combined use of genetic engineering and traditional breeding tools. Moreover, we propose the domestication of new halophilic crops to create a ‘saline agriculture’ which will not compete in terms of resources with conventional agriculture. PMID:26617620

Sex roles and mutual mate choice matter during mate sampling.

PubMed

Myhre, Lise Cats; de Jong, Karen; Forsgren, Elisabet; Amundsen, Trond

2012-06-01

The roles of females and males in mating competition and mate choice have lately proven more variable, between and within species, than previously thought. In nature, mating competition occurs during mate search and is expected to be regulated by the numbers of potential mates and same-sex competitors. Here, we present the first study to test how a temporal change in sex roles affects mating competition and mate choice during mate sampling. Our model system (the marine fish Gobiusculus flavescens) is uniquely suitable because of its change in sex roles, from conventional to reversed, over the breeding season. As predicted from sex role theory, courtship was typically initiated by males and terminated by females early in the breeding season. The opposite pattern was observed late in the season, at which time several females often simultaneously courted the same male. Mate-searching females visited more males early than late in the breeding season. Our study shows that mutual mate choice and mating competition can have profound effects on female and male behavior. Future work needs to consider the dynamic nature of mating competition and mate choice if we aim to fully understand sexual selection in the wild.

Integrated genomics and molecular breeding approaches for dissecting the complex quantitative traits in crop plants.

PubMed

Kujur, Alice; Saxena, Maneesha S; Bajaj, Deepak; Laxmi; Parida, Swarup K

2013-12-01

The enormous population growth, climate change and global warming are now considered major threats to agriculture and world's food security. To improve the productivity and sustainability of agriculture, the development of highyielding and durable abiotic and biotic stress-tolerant cultivars and/climate resilient crops is essential. Henceforth, understanding the molecular mechanism and dissection of complex quantitative yield and stress tolerance traits is the prime objective in current agricultural biotechnology research. In recent years, tremendous progress has been made in plant genomics and molecular breeding research pertaining to conventional and next-generation whole genome, transcriptome and epigenome sequencing efforts, generation of huge genomic, transcriptomic and epigenomic resources and development of modern genomics-assisted breeding approaches in diverse crop genotypes with contrasting yield and abiotic stress tolerance traits. Unfortunately, the detailed molecular mechanism and gene regulatory networks controlling such complex quantitative traits is not yet well understood in crop plants. Therefore, we propose an integrated strategies involving available enormous and diverse traditional and modern -omics (structural, functional, comparative and epigenomics) approaches/resources and genomics-assisted breeding methods which agricultural biotechnologist can adopt/utilize to dissect and decode the molecular and gene regulatory networks involved in the complex quantitative yield and stress tolerance traits in crop plants. This would provide clues and much needed inputs for rapid selection of novel functionally relevant molecular tags regulating such complex traits to expedite traditional and modern marker-assisted genetic enhancement studies in target crop species for developing high-yielding stress-tolerant varieties.

Genetic inheritance of pulp colour and selected traits of cassava (Manihot esculenta Crantz) at early generation selection.

PubMed

Nduwumuremyi, Athanase; Melis, Rob; Shanahan, Paul; Theodore, Asiimwe

2018-06-01

The early generation selection of cassava quantitative and qualitative traits saves breeding resources as it can shorten breeding schemes. Inheritance analysis provides important breeding information for developing new improved varieties. This study aimed at developing an F1 segregating cassava population and determining mode of gene action of pulp colour and selected traits at early generation selection (F1 seedling and clones). The 15 families exhibited significant (P < 0.05) phenotypic variation between offspring. The general combining ability (GCA) was significant for all traits except cassava brown streak disease on leaves, whereas specific combining ability (SCA) was significant for all evaluated traits. The Garukansubire and Gitamisi genotypes were the best general combiners for improving fresh storage root yield, while G1 and G2 were the best general combiners for improved carotenoid (yellow/orange pulp colour) and delayed physiological postharvest deterioration. The pulp colour had the highest GCA/SCA ratio and percent sum of squares due to GCA. The 15 F1 families exhibited essential genetic diversity for cassava improvement. The expression of most cassava traits was controlled by both additive and non-additive gene action. The study elucidated the role of dominance effects over the additive effects for the evaluated traits. However, the pulp colour was predominantly controlled by additive gene action. This implies the possibility of improving cassava through conventional breeding using recurrent selection for most traits. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Recent Advances in Utilizing Transcription Factors to Improve Plant Abiotic Stress Tolerance by Transgenic Technology

PubMed Central

Wang, Hongyan; Wang, Honglei; Shao, Hongbo; Tang, Xiaoli

2016-01-01

Agricultural production and quality are adversely affected by various abiotic stresses worldwide and this will be exacerbated by the deterioration of global climate. To feed a growing world population, it is very urgent to breed stress-tolerant crops with higher yields and improved qualities against multiple environmental stresses. Since conventional breeding approaches had marginal success due to the complexity of stress tolerance traits, the transgenic approach is now being popularly used to breed stress-tolerant crops. So identifying and characterizing the critical genes involved in plant stress responses is an essential prerequisite for engineering stress-tolerant crops. Far beyond the manipulation of single functional gene, engineering certain regulatory genes has emerged as an effective strategy now for controlling the expression of many stress-responsive genes. Transcription factors (TFs) are good candidates for genetic engineering to breed stress-tolerant crop because of their role as master regulators of many stress-responsive genes. Many TFs belonging to families AP2/EREBP, MYB, WRKY, NAC, bZIP have been found to be involved in various abiotic stresses and some TF genes have also been engineered to improve stress tolerance in model and crop plants. In this review, we take five large families of TFs as examples and review the recent progress of TFs involved in plant abiotic stress responses and their potential utilization to improve multiple stress tolerance of crops in the field conditions. PMID:26904044

Intraosseous anesthesia with solution injection controlled by a computerized system versus conventional oral anesthesia: a preliminary study.

PubMed

Beneito-Brotons, Rut; Peñarrocha-Oltra, David; Ata-Ali, Javier; Peñarrocha, María

2012-05-01

To compare a computerized intraosseous anesthesia system with the conventional oral anesthesia techniques, and analyze the latency and duration of the anesthetic effect and patient preference. A simple-blind prospective study was made between March 2007 and May 2008. Each patient was subjected to two anesthetic techniques: conventional and intraosseous using the Quicksleeper® system (DHT, Cholet, France). A split-mouth design was adopted in which each patient underwent treatment of a tooth with one of the techniques, and treatment of the homologous contralateral tooth with the other technique. The treatments consisted of restorations, endodontic procedures and simple extractions. The study series comprised 12 females and 18 males with a mean age of 36.8 years. The 30 subjects underwent a total of 60 anesthetic procedures. Intraosseous and conventional oral anesthesia caused discomfort during administration in 46.3% and 32.1% of the patients, respectively. The latency was 7.1±2.23 minutes for the conventional technique and 0.48±0.32 for intraosseous anesthesia--the difference being statistically significant. The depth of the anesthetic effect was sufficient to allow the patients to tolerate the dental treatments. The duration of the anesthetic effect in soft tissues was 199.3 minutes with the conventional technique versus only 1.6 minutes with intraosseous anesthesia--the difference between the two techniques being statistically significant. Most of the patients (69.7%) preferred intraosseous anesthesia. The described intraosseous anesthetic system is effective, with a much shorter latency than the conventional technique, sufficient duration of anesthesia to perform the required dental treatments, and with a much lesser soft tissue anesthetic effect. Most of the patients preferred intraosseous anesthesia.

Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison.

PubMed

Seruya, Mitchel; Fisher, Mark; Rodriguez, Eduardo D

2013-11-01

There has been rising interest in computer-aided design/computer-aided manufacturing for preoperative planning and execution of osseous free flap reconstruction. The purpose of this study was to compare outcomes between computer-assisted and conventional fibula free flap techniques for craniofacial reconstruction. A two-center, retrospective review was carried out on patients who underwent fibula free flap surgery for craniofacial reconstruction from 2003 to 2012. Patients were categorized by the type of reconstructive technique: conventional (between 2003 and 2009) or computer-aided design/computer-aided manufacturing (from 2010 to 2012). Demographics, surgical factors, and perioperative and long-term outcomes were compared. A total of 68 patients underwent microsurgical craniofacial reconstruction: 58 conventional and 10 computer-aided design and manufacturing fibula free flaps. By demographics, patients undergoing the computer-aided design/computer-aided manufacturing method were significantly older and had a higher rate of radiotherapy exposure compared with conventional patients. Intraoperatively, the median number of osteotomies was significantly higher (2.0 versus 1.0, p=0.002) and the median ischemia time was significantly shorter (120 minutes versus 170 minutes, p=0.004) for the computer-aided design/computer-aided manufacturing technique compared with conventional techniques; operative times were shorter for patients undergoing the computer-aided design/computer-aided manufacturing technique, although this did not reach statistical significance. Perioperative and long-term outcomes were equivalent for the two groups, notably, hospital length of stay, recipient-site infection, partial and total flap loss, and rate of soft-tissue and bony tissue revisions. Microsurgical craniofacial reconstruction using a computer-assisted fibula flap technique yielded significantly shorter ischemia times amidst a higher number of osteotomies compared with conventional techniques. Therapeutic, III.

Intraosseous anesthesia with solution injection controlled by a computerized system versus conventional oral anesthesia: A preliminary study

PubMed Central

Beneito-Brotons, Rut; Peñarrocha-Oltra, David; Ata-Ali, Javier

2012-01-01

Objective: To compare a computerized intraosseous anesthesia system with the conventional oral anesthesia techniques, and analyze the latency and duration of the anesthetic effect and patient preference. Design: A simple-blind prospective study was made between March 2007 and May 2008. Each patient was subjected to two anesthetic techniques: conventional and intraosseous using the Quicksleeper® system (DHT, Cholet, France). A split-mouth design was adopted in which each patient underwent treatment of a tooth with one of the techniques, and treatment of the homologous contralateral tooth with the other technique. The treatments consisted of restorations, endodontic procedures and simple extractions. Results: The study series comprised 12 females and 18 males with a mean age of 36.8 years. The 30 subjects underwent a total of 60 anesthetic procedures. Intraosseous and conventional oral anesthesia caused discomfort during administration in 46.3% and 32.1% of the patients, respectively. The latency was 7.1±2.23 minutes for the conventional technique and 0.48±0.32 for intraosseous anesthesia – the difference being statistically significant. The depth of the anesthetic effect was sufficient to allow the patients to tolerate the dental treatments. The duration of the anesthetic effect in soft tissues was 199.3 minutes with the conventional technique versus only 1.6 minutes with intraosseous anesthesia – the difference between the two techniques being statistically significant. Most of the patients (69.7%) preferred intraosseous anesthesia. Conclusions: The described intraosseous anesthetic system is effective, with a much shorter latency than the conventional technique, sufficient duration of anesthesia to perform the required dental treatments, and with a much lesser soft tissue anesthetic effect. Most of the patients preferred intraosseous anesthesia. Key words:Anesthesia, intraosseous, oral anesthesia, infiltrating, mandibular block, Quicksleeper®. PMID:22143722

Hall versus conventional stainless steel crown techniques: in vitro investigation of marginal fit and microleakage using three different luting agents.

PubMed

Erdemci, Zeynep Yalçınkaya; Cehreli, S Burçak; Tirali, R Ebru

2014-01-01

This study's purpose was to investigate microleakage and marginal discrepancies in stainless steel crowns (SSCs) placed using conventional and Hall techniques and cemented with three different luting agents. Seventy-eight human primary maxillary second molars were randomly assigned to two groups (N=39), and SSCs were applied either with the Hall or conventional technique. These two groups were further subgrouped according to the material used for crown cementation (N=13 per group). Two specimens in each group were processed for scanning electron microscopy investigation. The extent of microleakage and marginal fit was quantified in millimeters on digitally photographed sections using image analysis software. The data were compared with a two-way independent and a two-way mixed analysis of variance (P=.05). The scores in the Hall group were significantly worse than those in the conventional technique group (P<.05). In both groups, resin cement displayed the lowest extent of microleakage, followed by glass ionomer and polycarboxylate cements (P<.05). Stainless steel crowns applied using the Hall technique displayed higher microleakage scores than those applied using the conventional technique, regardless of the cementation material. When the interaction of the material and technique was assessed, resin cement presented as the best choice for minimizing microleakage in both techniques.

Behavioural consequences of IVC cages on male and female C57BL/6J mice.

PubMed

Logge, W; Kingham, J; Karl, T

2013-05-01

Recent developments in the technology to breed and house laboratory rodents for medical research has produced individually ventilated cage (IVC) systems. These IVC systems produce a cage environment significantly different to conventional cages. As it is not known in detail whether housing mice in IVCs impacts on their baseline and drug-induced behaviours compared to mice of conventional filter-top cages a comprehensive multi-tiered phenotyping strategy was used to test the behavioural consequences of IVC housing in male and female C57BL/6JArc mice. IVC had anxiety-like effects in the elevated plus maze, which were more pronounced in female mice whereas cognition and locomotion of all test mice were not modified by IVC housing. Mice raised in IVC cage systems were socially more active than mice of filter-top systems. Furthermore, males raised in IVC exhibited an increased sensitivity to the locomotor-stimulating effects of acute MK-801 treatment compared to males in conventional cages. In summary, this is the first study revealing the longer-term effects of IVC housing on social behaviours and the locomotor response to an acute MK-801 challenge. In conclusion, researchers upgrading their holding facilities to IVC housing may encounter a shift in experimental outcomes (e.g. post pharmacological challenges) and the behavioural phenotype of test mice. Furthermore, differences between the housing conditions of breeding facilities and test facilities must carefully be considered. Finally, researchers should clarify in detail the type of housing test animals have been exposed to when publishing experimental animal research data. Copyright © 2013 IBRO. Published by Elsevier Ltd. All rights reserved.

Impact of selection on maize root traits and rhizosphere interactions

NASA Astrophysics Data System (ADS)

Schmidt, J. E.; Gaudin, A. C. M.

2017-12-01

Effects of domestication and breeding on maize have been well-characterized aboveground, but impacts on root traits and rhizosphere processes remain unclear. Breeding in high-inorganic-input environments may have negatively affected the ability of modern maize to acquire nutrients through foraging and microbial interactions in marginal and/or organically managed soils. Twelve maize genotypes representing a selection gradient (teosintes, landraces, open-pollinated parents of modern elite germplasm, and modern hybrids released 1934-2015) were grown in three soils varying in intensity of long-term management (unfertilized, organic, conventional) in the greenhouse. Recruitment of rhizosphere microbial communities, nutrient acquisition, and plant productivity were affected by genotype-by-soil interactions. Maize genotypes exhibit significant variation in their ability to obtain nutrients from soils of different management history, indicating the potential for re-integration of beneficial root and rhizosphere traits to increase adaptation to low-input agroecosystems.

Golden Rice and 'Golden' crops for human nutrition.

PubMed

Beyer, Peter

2010-11-30

Micronutrients are essential for a healthy life. Humans do not produce micronutrients, and hence they must obtain them through the foodchain. Staple crops are the predominant food source of mankind, but need to be complemented by other foodstuffs because they are generally deficient in one or the other micronutrient. Breeding for micronutrient-dense crops is not always a viable option because of the absence of genetic variability for the desired trait. Moreover, sterility issues and the complex genetic makeup of some crop plants make them unamenable to conventional breeding. In these cases, genetic modification remains the only viable option. The tools to produce a number of micronutrients in staple crops have recently become available thanks to the identification of the genes involved in the corresponding biochemical pathways at an unprecedented rate. Discarding genetic modification as a viable option is definitely not in the interest of human wellbeing. Copyright © 2010 Elsevier B.V. All rights reserved.

Genomic analysis for managing small and endangered populations: a case study in Tyrol Grey cattle

PubMed Central

Mészáros, Gábor; Boison, Solomon A.; Pérez O'Brien, Ana M.; Ferenčaković, Maja; Curik, Ino; Da Silva, Marcos V. Barbosa; Utsunomiya, Yuri T.; Garcia, Jose F.; Sölkner, Johann

2015-01-01

Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (FROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13–0.91 and 0.12–0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations. PMID:26074948

Genomic analysis for managing small and endangered populations: a case study in Tyrol Grey cattle.

PubMed

Mészáros, Gábor; Boison, Solomon A; Pérez O'Brien, Ana M; Ferenčaković, Maja; Curik, Ino; Da Silva, Marcos V Barbosa; Utsunomiya, Yuri T; Garcia, Jose F; Sölkner, Johann

2015-01-01

Analysis of genomic data is increasingly becoming part of the livestock industry. Therefore, the routine collection of genomic information would be an invaluable resource for effective management of breeding programs in small, endangered populations. The objective of the paper was to demonstrate how genomic data could be used to analyse (1) linkage disequlibrium (LD), LD decay and the effective population size (NeLD); (2) Inbreeding level and effective population size (NeROH) based on runs of homozygosity (ROH); (3) Prediction of genomic breeding values (GEBV) using small within-breed and genomic information from other breeds. The Tyrol Grey population was used as an example, with the goal to highlight the potential of genomic analyses for small breeds. In addition to our own results we discuss additional use of genomics to assess relatedness, admixture proportions, and inheritance of harmful variants. The example data set consisted of 218 Tyrol Grey bull genotypes, which were all available AI bulls in the population. After standard quality control restrictions 34,581 SNPs remained for the analysis. A separate quality control was applied to determine ROH levels based on Illumina GenCall and Illumina GenTrain scores, resulting into 211 bulls and 33,604 SNPs. LD was computed as the squared correlation coefficient between SNPs within a 10 mega base pair (Mb) region. ROHs were derived based on regions covering at least 4, 8, and 16 Mb, suggesting that animals had common ancestors approximately 12, 6, and 3 generations ago, respectively. The corresponding mean inbreeding coefficients (F ROH) were 4.0% for 4 Mb, 2.9% for 8 Mb and 1.6% for 16 Mb runs. With an average generation interval of 5.66 years, estimated NeROH was 125 (NeROH>16 Mb), 186 (NeROH>8 Mb) and 370 (NeROH>4 Mb) indicating strict avoidance of close inbreeding in the population. The LD was used as an alternative method to infer the population history and the Ne. The results show a continuous decrease in NeLD, to 780, 120, and 80 for 100, 10, and 5 generations ago, respectively. Genomic selection was developed for and is working well in large breeds. The same methodology was applied in Tyrol Grey cattle, using different reference populations. Contrary to the expectations, the accuracy of GEBVs with very small within breed reference populations were very high, between 0.13-0.91 and 0.12-0.63, when estimated breeding values and deregressed breeding values were used as pseudo-phenotypes, respectively. Subsequent analyses confirmed the high accuracies being a consequence of low reliabilities of pseudo-phenotypes in the validation set, thus being heavily influenced by parent averages. Multi-breed and across breed reference sets gave inconsistent and lower accuracies. Genomic information may have a crucial role in management of small breeds, even if its primary usage differs from that of large breeds. It allows to assess relatedness between individuals, trends in inbreeding and to take decisions accordingly. These decisions would be based on the real genome architecture, rather than conventional pedigree information, which can be missing or incomplete. We strongly suggest the routine genotyping of all individuals that belong to a small breed in order to facilitate the effective management of endangered livestock populations.

Accuracy of ringless casting and accelerated wax-elimination technique: a comparative in vitro study.

PubMed

Prasad, Rahul; Al-Keraif, Abdulaziz Abdullah; Kathuria, Nidhi; Gandhi, P V; Bhide, S V

2014-02-01

The purpose of this study was to determine whether the ringless casting and accelerated wax-elimination techniques can be combined to offer a cost-effective, clinically acceptable, and time-saving alternative for fabricating single unit castings in fixed prosthodontics. Sixty standardized wax copings were fabricated on a type IV stone replica of a stainless steel die. The wax patterns were divided into four groups. The first group was cast using the ringless investment technique and conventional wax-elimination method; the second group was cast using the ringless investment technique and accelerated wax-elimination method; the third group was cast using the conventional metal ring investment technique and conventional wax-elimination method; the fourth group was cast using the metal ring investment technique and accelerated wax-elimination method. The vertical marginal gap was measured at four sites per specimen, using a digital optical microscope at 100× magnification. The results were analyzed using two-way ANOVA to determine statistical significance. The vertical marginal gaps of castings fabricated using the ringless technique (76.98 ± 7.59 μm) were significantly less (p < 0.05) than those castings fabricated using the conventional metal ring technique (138.44 ± 28.59 μm); however, the vertical marginal gaps of the conventional (102.63 ± 36.12 μm) and accelerated wax-elimination (112.79 ± 38.34 μm) castings were not statistically significant (p > 0.05). The ringless investment technique can produce castings with higher accuracy and can be favorably combined with the accelerated wax-elimination method as a vital alternative to the time-consuming conventional technique of casting restorations in fixed prosthodontics. © 2013 by the American College of Prosthodontists.

[The anesthetic effects of Gow-Gates technique of inferior alveolar nerve block in impacted mandibular third molar extraction].

PubMed

Yang, Jieping; Liu, Wei; Gao, Qinghong

2013-08-01

To evaluate the anesthetic effects and safety of Gow-Gates technique of inferior alveolar nerve block in impacted mandibular third molar extraction. A split-mouth study was designed. The bilateral impacted mandibular third molar of 32 participants were divided into Gow-Gates technique of inferior alveolar nerve block (Gow-Gates group) and conventional technique of inferior alveolar nerve block (conventional group) randomly with third molar extracted. The anesthetic effects and adverse events were recorded. All the participants completed the research. The anesthetic success rate was 96.9% in Gow-Gates group and 90.6% in conventional group with no statistical difference ( P= 0.317); but when comparing the anesthesia grade, Gow-Gates group had a 96.9% of grade A and B, and conventional group had a rate of 78.1% (P = 0.034). And the Gow-Gates group had a much lower withdrawn bleeding than conventional group (P = 0.025). Two groups had no hematoma. Gow-Gates technique had a reliable anesthesia effects and safety in impacted mandibular third molar extraction and could be chosen as a candidate for the conventional inferior alveolar nerve block.

Reclamation of mosquito breeding sites using Landsat-8 remote sensing data: A case study of Birnin Kebbi, Nigeria

NASA Astrophysics Data System (ADS)

Amusuk, Danboyi Joseph; Hashim, Mazlan; Beiranvand Pour, Amin

2016-06-01

It is believed by recent releases of World Health Organization (WHO) that more than half of the world's population (3.2 billion) live in areas that are at risk of malaria transmission. Although increased efforts are dramatically reducing the malaria burden in some places where the rate of new cases indicates a fall by 37% globally and 60% death rate. Unfortunately, the subSaharan Africa still shares 89% of malaria and 91% of malaria deaths. Essentially, attacking the causative vectors and reclamation of the vector breeding sites could be remarkable for the rolling back the malaria epidemic project. Consequently, it is essential to explore the possibility of using recent Landsat-8 data remote sensing data and applications of Geographic Information System (GIS) technique in contributing to the realization of this objective. This investigation used for identifying mosquito breeding habitat (Derelict Ponds) zones the application of supervised classification of the Landsat-8 image in conjunction with GIS layering which allowed identification of high risk prone regions for mosquito breeding habitat. The methodology delineated 10 spatial locations of the Derelict Ponds (DP) spread around the Birnin Kebbi urban environment. Moreover, the results combined with comparative analysis of the link between warm climatic (temperature and rainfall data) conditions and Malaria prevalence that is associated with urban poverty. This study indicates that the application of Landsat-8 data and GIS techniques can be a useful tool for planning and management of environmental health and mapping of hot spot environmental problem areas.

Artificial production and natural breeding of the endangered frog species Odorrana ishikawae, with special reference to fauna conservation in the laboratory.

PubMed

Sumida, Masayuki; Satou, Naoki; Yoshikawa, Natsuhiko; Kurabayashi, Atsushi; Islam, Mohammed Mafizul; Igawa, Takeshi; Oumi, Shohei; Katsuren, Seiki; Ota, Hidetoshi; Shintani, Nozomi; Fukuniwa, Hiroko; Sano, Naomi; Fujii, Tamotsu

2011-11-01

Odorrana ishikawae is listed as a class IB endangered species in the IUCN Red List and is protected by law in both Okinawa and Kagoshima Prefectures, Japan. Here, in an effort to help effectively preserve the genetic diversity of this endangered species in the laboratory, we tested a farming technique involving the artificial breeding of frogs, and also promoted natural breeding in the laboratory. Field-caught male/female pairs of the Amami and Okinawa Island populations were artificially bred using an artificial insemination method in the 2004, 2006, and 2008 breeding seasons (March to April). Although fewer than 50% of the inseminated eggs achieved metamorphosis, approximately 500, 300, and 250 offspring from the three respective trials are currently being raised in the laboratory. During the 2009 and 2010 breeding seasons, second-generation offspring were produced by the natural mating activities of the first offspring derived from the two artificial matings in 2004. The findings and the methods presented here appear to be applicable to the temporary protection of genetic diversity of local populations in which the number of individuals has decreased or the environmental conditions have worsened to levels that frogs are unable to survive by themselves.

Ventral marsupialisation in the treatment of gastric dilatation-volvulus in two dogs.

PubMed

Mills, J

2000-06-01

A ventral marsupialisation technique is described which was used successfully to manage gastric dilatation-volvulus (GDV) in two large breed dogs. The procedure allowed the stomach to be completely and rapidly emptied and lavaged without peritoneal contamination. Drainage was maintained in the postoperative period for both dogs and the technique was expected to result in a permanent ventral gastropexy.

Development of innovative techniques and principles that may be used as models to improve plant performance. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanna, Wayne W.; Burton, Glenn W.

2000-06-25

We developed fundamental methods and techniques for transferring germplasm from wild to cultivated species. Germplasm transferred included diverse cytoplasms, new genes for pest resistance, genes controlling dry matter yield and apomixis. Some of the germplasm has been shown to be valuable in plant breeding and has been incorporated into commercial cultivators.

Establishment of a Somatic Cell Bank for Indian Buffalo Breeds and Assessing the Suitability of the Cryopreserved Cells for Somatic Cell Nuclear Transfer.

PubMed

Selokar, Naresh L; Sharma, Papori; Krishna, Ananth; Kumar, Deepak; Kumar, Dharmendra; Saini, Monika; Sharma, Arpna; Vijayalakshmy, Kennady; Yadav, Prem Singh

2018-06-01

Biobanks of cryopreserved gametes and embryos of domestic animals have been utilized to spread desired genotypes and to conserve the animal germplasm of endangered breeds. In principle, somatic cells can be used for the same purposes, and for reviving of animals, the somatic cells must be suitable for animal cloning techniques, such as somatic cell nuclear transfer. In the present study, we derived and cryopreserved somatic cells from three breeds of riverine and swamp-like type buffaloes and established a somatic cell bank. In total, 350 cryovials of 14 different individual animals (25 cryovials per animal) were cryopreserved and informative data such as breed value, origin, and others were documented. Immunostaining of the established cells against vimentin and cytokeratin suggested a commitment to the fibroblast lineage. In addition, microsatellite analysis was performed and documented for unambiguous parentage verification of clones in the future. Subsequently, the cryopreserved cells were tested for their suitability as nuclear donors (n = 7) using handmade cloning, and the reconstructed embryos were cultured in vitro. The cleavage rates (95.99% ± 2.17% vs. 82.18% ± 2.50%) and blastocyst rates (37.73% ± 1.54% vs. 24.31% ± 1.78%) were higher (p < 0.05) for riverine buffalo cells than that of swamp-like buffalo cells, whereas the total cell numbers of blastocysts (258.16 ± 36.25 vs. 198.16 ± 36.25, respectively) were similar. In conclusion, we demonstrated the feasibility of biobanking of buffalo somatic cells, and that the cryopreserved cells can be used to produce cloned embryos. This study encourages the development of somatic cell biobanks of domestic livestock, including endangered breeds of buffalo, to preserve valuable genotypes for future revitalization by animal cloning techniques.

Responsible decision-making for plant research and breeding innovations in the European Union.

PubMed

Eriksson, Dennis; Chatzopoulou, Sevasti

2018-01-02

Plant research and breeding has made substantial technical progress over the past few decades, indicating a potential for tremendous societal impact. Due to this potential, the development of policies and legislation on plant breeding and the technical progress should preferably involve all relevant stakeholders. However, we argue here that there is a substantial imbalance in the European Union (EU) regarding the influence of the various stakeholder groups on policy makers. We use evidence from three examples in order to show that the role of science is overlooked: 1) important delays in the decision process concerning the authorization of genetically modified (GM) maize events, 2) the significance attributed to non-scientific reasons in new legislation concerning the prohibition of GM events in EU member states, and 3) failure of the European Commission to deliver legal guidance to new plant breeding techniques despite sufficient scientific evidence and advisory reports. We attribute this imbalance to misinformation and misinterpretation of public perceptions and a disproportionate attention to single outlier reports, and we present ideas on how to establish a better stakeholder balance within this field.

Biofortified Crops Generated by Breeding, Agronomy, and Transgenic Approaches Are Improving Lives of Millions of People around the World

PubMed Central

Garg, Monika; Sharma, Natasha; Sharma, Saloni; Kapoor, Payal; Kumar, Aman; Chunduri, Venkatesh; Arora, Priya

2018-01-01

Biofortification is an upcoming, promising, cost-effective, and sustainable technique of delivering micronutrients to a population that has limited access to diverse diets and other micronutrient interventions. Unfortunately, major food crops are poor sources of micronutrients required for normal human growth. The manuscript deals in all aspects of crop biofortification which includes—breeding, agronomy, and genetic modification. It tries to summarize all the biofortification research that has been conducted on different crops. Success stories of biofortification include lysine and tryptophan rich quality protein maize (World food prize 2000), Vitamin A rich orange sweet potato (World food prize 2016); generated by crop breeding, oleic acid, and stearidonic acid soybean enrichment; through genetic transformation and selenium, iodine, and zinc supplementation. The biofortified food crops, especially cereals, legumes, vegetables, and fruits, are providing sufficient levels of micronutrients to targeted populations. Although a greater emphasis is being laid on transgenic research, the success rate and acceptability of breeding is much higher. Besides the challenges biofortified crops hold a bright future to address the malnutrition challenge. PMID:29492405

Biofortified Crops Generated by Breeding, Agronomy, and Transgenic Approaches Are Improving Lives of Millions of People around the World.

PubMed

Garg, Monika; Sharma, Natasha; Sharma, Saloni; Kapoor, Payal; Kumar, Aman; Chunduri, Venkatesh; Arora, Priya

2018-01-01

Biofortification is an upcoming, promising, cost-effective, and sustainable technique of delivering micronutrients to a population that has limited access to diverse diets and other micronutrient interventions. Unfortunately, major food crops are poor sources of micronutrients required for normal human growth. The manuscript deals in all aspects of crop biofortification which includes-breeding, agronomy, and genetic modification. It tries to summarize all the biofortification research that has been conducted on different crops. Success stories of biofortification include lysine and tryptophan rich quality protein maize (World food prize 2000), Vitamin A rich orange sweet potato (World food prize 2016); generated by crop breeding, oleic acid, and stearidonic acid soybean enrichment; through genetic transformation and selenium, iodine, and zinc supplementation. The biofortified food crops, especially cereals, legumes, vegetables, and fruits, are providing sufficient levels of micronutrients to targeted populations. Although a greater emphasis is being laid on transgenic research, the success rate and acceptability of breeding is much higher. Besides the challenges biofortified crops hold a bright future to address the malnutrition challenge.

DGAT1 K232A polymorphism in Brazilian cattle breeds.

PubMed

Lacorte, G A; Machado, M A; Martinez, M L; Campos, A L; Maciel, R P; Verneque, R S; Teodoro, R L; Peixoto, M G C D; Carvalho, M R S; Fonseca, C G

2006-08-31

Recent reports identified DGAT1 (EC 2.3.1.20) harboring a lysine to alanine substitution (K232A) as a candidate gene with a strong effect on milk production traits. Our objective was to estimate the frequency of the DGAT1 K232A polymorphism in the main Zebu and Taurine breeds in Brazil as well as in Zebu x Taurine crossbreds as a potential QTL for marker-assisted selection. Samples of 331 animals from the main Brazilian breeds, Nellore, Guzerat, Red Sindhi, Gyr, Holstein, and Gyr x Holstein F1 were genotyped for DGAT1 K232A polymorphism (A and K alleles) using the PCR-RFLP technique. The highest frequency of the A allele was found in the Holstein sample (73%) followed by Gyr x Holstein F1 (39%). Gyr and Red Sindhi showed low frequencies of A alleles (4 and 2.5%, respectively). The A allele was not found in the Nellore and Guzerat samples. Our results could be used to guide association studies between this locus and milk traits in these breeds.

Conventional and conformal technique of external beam radiotherapy in locally advanced cervical cancer: Dose distribution, tumor response, and side effects

NASA Astrophysics Data System (ADS)

Mutrikah, N.; Winarno, H.; Amalia, T.; Djakaria, M.

2017-08-01

The objective of this study was to compare conventional and conformal techniques of external beam radiotherapy (EBRT) in terms of the dose distribution, tumor response, and side effects in the treatment of locally advanced cervical cancer patients. A retrospective cohort study was conducted on cervical cancer patients who underwent EBRT before brachytherapy in the Radiotherapy Department of Cipto Mangunkusumo Hospital. The prescribed dose distribution, tumor response, and acute side effects of EBRT using conventional and conformal techniques were investigated. In total, 51 patients who underwent EBRT using conventional techniques (25 cases using Cobalt-60 and 26 cases using a linear accelerator (LINAC)) and 29 patients who underwent EBRT using conformal techniques were included in the study. The distribution of the prescribed dose in the target had an impact on the patient’s final response to EBRT. The complete response rate of patients to conformal techniques was significantly greater (58%) than that of patients to conventional techniques (42%). No severe acute local side effects were seen in any of the patients (Radiation Therapy Oncology Group (RTOG) grades 3-4). The distribution of the dose and volume to the gastrointestinal tract affected the proportion of mild acute side effects (RTOG grades 1-2). The urinary bladder was significantly greater using conventional techniques (Cobalt-60/LINAC) than using conformal techniques at 72% and 78% compared to 28% and 22%, respectively. The use of conformal techniques in pelvic radiation therapy is suggested in radiotherapy centers with CT simulators and 3D Radiotherapy Treatment Planning Systems (RTPSs) to decrease some uncertainties in radiotherapy planning. The use of AP/PA pelvic radiation techniques with Cobalt-60 should be limited in body thicknesses equal to or less than 18 cm. When using conformal techniques, delineation should be applied in the small bowel, as it is considered a critical organ according to RTOG consensus guidelines.

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study.

PubMed

Ullattuthodi, Sujana; Cherian, Kandathil Phillip; Anandkumar, R; Nambiar, M Sreedevi

2017-01-01

This in vitro study seeks to evaluate and compare the marginal and internal fit of cobalt-chromium copings fabricated using the conventional and direct metal laser sintering (DMLS) techniques. A master model of a prepared molar tooth was made using cobalt-chromium alloy. Silicone impression of the master model was made and thirty standardized working models were then produced; twenty working models for conventional lost-wax technique and ten working models for DMLS technique. A total of twenty metal copings were fabricated using two different production techniques: conventional lost-wax method and DMLS; ten samples in each group. The conventional and DMLS copings were cemented to the working models using glass ionomer cement. Marginal gap of the copings were measured at predetermined four points. The die with the cemented copings are standardized-sectioned with a heavy duty lathe. Then, each sectioned samples were analyzed for the internal gap between the die and the metal coping using a metallurgical microscope. Digital photographs were taken at ×50 magnification and analyzed using measurement software. Statistical analysis was done by unpaired t -test and analysis of variance (ANOVA). The results of this study reveal that no significant difference was present in the marginal gap of conventional and DMLS copings ( P > 0.05) by means of ANOVA. The mean values of internal gap of DMLS copings were significantly greater than that of conventional copings ( P < 0.05). Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

Quantitative assessment of muscle in dogs using a vertebral epaxial muscle score.

PubMed

Freeman, Lisa M; Sutherland-Smith, James; Prantil, Lori R; Sato, Amy F; Rush, John E; Barton, Bruce A

2017-10-01

Muscle loss associated with disease (cachexia) or with aging (sarcopenia) is common in dogs, but clinically relevant methods for quantifying muscle loss are needed. We previously validated an ultrasound method of quantifying muscle size in dogs in a single breed. The goal of this study was to assess the variability and reproducibility of the Vertebral Epaxial Muscle Score (VEMS) in other dog breeds. Static ultrasound images were obtained from 38 healthy, neutered dogs of 5 different breeds between 1- and 5-years-old. The maximal transverse right epaxial muscle height and area at the level of the 13th thoracic vertebra (T13) were measured. Length of the 4th thoracic vertebra (T4) was measured from thoracic radiography. Ratios of the muscle height and area to vertebral length (height/T4 and area/T4, respectively) were calculated to account for differences in body size among breeds. Reproducibility testing was performed on 2 dogs of each breed (26% of the total) to determine intra- and inter-investigator reproducibility, as well as intra-class correlation. Mean height/T4 = 1.02 ± 0.18 and mean area/T4 = 3.32 ± 1.68. There was no significant difference for height/T4 ( P = 0.10) among breeds, but breeds were significantly different in area/T4 ( P < 0.001). Intra-class correlation ranged from 0.80 to 0.99. Testing showed better reproducibility for height/T4 compared to area/T4. The VEMS using height/T4 was valid and reproducible for healthy dogs of different sizes and body conformations. Studies assessing this technique in dogs with congestive heart failure and other diseases associated with muscle loss are warranted.

Quantitative assessment of muscle in dogs using a vertebral epaxial muscle score

PubMed Central

Freeman, Lisa M.; Sutherland-Smith, James; Prantil, Lori R.; Sato, Amy F.; Rush, John E.; Barton, Bruce A.

2017-01-01

Muscle loss associated with disease (cachexia) or with aging (sarcopenia) is common in dogs, but clinically relevant methods for quantifying muscle loss are needed. We previously validated an ultrasound method of quantifying muscle size in dogs in a single breed. The goal of this study was to assess the variability and reproducibility of the Vertebral Epaxial Muscle Score (VEMS) in other dog breeds. Static ultrasound images were obtained from 38 healthy, neutered dogs of 5 different breeds between 1- and 5-years-old. The maximal transverse right epaxial muscle height and area at the level of the 13th thoracic vertebra (T13) were measured. Length of the 4th thoracic vertebra (T4) was measured from thoracic radiography. Ratios of the muscle height and area to vertebral length (height/T4 and area/T4, respectively) were calculated to account for differences in body size among breeds. Reproducibility testing was performed on 2 dogs of each breed (26% of the total) to determine intra- and inter-investigator reproducibility, as well as intra-class correlation. Mean height/T4 = 1.02 ± 0.18 and mean area/T4 = 3.32 ± 1.68. There was no significant difference for height/T4 (P = 0.10) among breeds, but breeds were significantly different in area/T4 (P < 0.001). Intra-class correlation ranged from 0.80 to 0.99. Testing showed better reproducibility for height/T4 compared to area/T4. The VEMS using height/T4 was valid and reproducible for healthy dogs of different sizes and body conformations. Studies assessing this technique in dogs with congestive heart failure and other diseases associated with muscle loss are warranted. PMID:29081582

Exploitation of data from breeding programs supports rapid implementation of genomic selection for key agronomic traits in perennial ryegrass.

PubMed

Pembleton, Luke W; Inch, Courtney; Baillie, Rebecca C; Drayton, Michelle C; Thakur, Preeti; Ogaji, Yvonne O; Spangenberg, German C; Forster, John W; Daetwyler, Hans D; Cogan, Noel O I

2018-06-02

Exploitation of data from a ryegrass breeding program has enabled rapid development and implementation of genomic selection for sward-based biomass yield with a twofold-to-threefold increase in genetic gain. Genomic selection, which uses genome-wide sequence polymorphism data and quantitative genetics techniques to predict plant performance, has large potential for the improvement in pasture plants. Major factors influencing the accuracy of genomic selection include the size of reference populations, trait heritability values and the genetic diversity of breeding populations. Global diversity of the important forage species perennial ryegrass is high and so would require a large reference population in order to achieve moderate accuracies of genomic selection. However, diversity of germplasm within a breeding program is likely to be lower. In addition, de novo construction and characterisation of reference populations are a logistically complex process. Consequently, historical phenotypic records for seasonal biomass yield and heading date over a 18-year period within a commercial perennial ryegrass breeding program have been accessed, and target populations have been characterised with a high-density transcriptome-based genotyping-by-sequencing assay. Ability to predict observed phenotypic performance in each successive year was assessed by using all synthetic populations from previous years as a reference population. Moderate and high accuracies were achieved for the two traits, respectively, consistent with broad-sense heritability values. The present study represents the first demonstration and validation of genomic selection for seasonal biomass yield within a diverse commercial breeding program across multiple years. These results, supported by previous simulation studies, demonstrate the ability to predict sward-based phenotypic performance early in the process of individual plant selection, so shortening the breeding cycle, increasing the rate of genetic gain and allowing rapid adoption in ryegrass improvement programs.

Genome-Wide Analysis Reveals Selection for Important Traits in Domestic Horse Breeds

PubMed Central

Petersen, Jessica L.; Mickelson, James R.; Rendahl, Aaron K.; Valberg, Stephanie J.; Andersson, Lisa S.; Axelsson, Jeanette; Bailey, Ernie; Bannasch, Danika; Binns, Matthew M.; Borges, Alexandre S.; Brama, Pieter; da Câmara Machado, Artur; Capomaccio, Stefano; Cappelli, Katia; Cothran, E. Gus; Distl, Ottmar; Fox-Clipsham, Laura; Graves, Kathryn T.; Guérin, Gérard; Haase, Bianca; Hasegawa, Telhisa; Hemmann, Karin; Hill, Emmeline W.; Leeb, Tosso; Lindgren, Gabriella; Lohi, Hannes; Lopes, Maria Susana; McGivney, Beatrice A.; Mikko, Sofia; Orr, Nicholas; Penedo, M. Cecilia T.; Piercy, Richard J.; Raekallio, Marja; Rieder, Stefan; Røed, Knut H.; Swinburne, June; Tozaki, Teruaki; Vaudin, Mark; Wade, Claire M.; McCue, Molly E.

2013-01-01

Intense selective pressures applied over short evolutionary time have resulted in homogeneity within, but substantial variation among, horse breeds. Utilizing this population structure, 744 individuals from 33 breeds, and a 54,000 SNP genotyping array, breed-specific targets of selection were identified using an FST-based statistic calculated in 500-kb windows across the genome. A 5.5-Mb region of ECA18, in which the myostatin (MSTN) gene was centered, contained the highest signature of selection in both the Paint and Quarter Horse. Gene sequencing and histological analysis of gluteal muscle biopsies showed a promoter variant and intronic SNP of MSTN were each significantly associated with higher Type 2B and lower Type 1 muscle fiber proportions in the Quarter Horse, demonstrating a functional consequence of selection at this locus. Signatures of selection on ECA23 in all gaited breeds in the sample led to the identification of a shared, 186-kb haplotype including two doublesex related mab transcription factor genes (DMRT2 and 3). The recent identification of a DMRT3 mutation within this haplotype, which appears necessary for the ability to perform alternative gaits, provides further evidence for selection at this locus. Finally, putative loci for the determination of size were identified in the draft breeds and the Miniature horse on ECA11, as well as when signatures of selection surrounding candidate genes at other loci were examined. This work provides further evidence of the importance of MSTN in racing breeds, provides strong evidence for selection upon gait and size, and illustrates the potential for population-based techniques to find genomic regions driving important phenotypes in the modern horse. PMID:23349635

Epidemiology of ocular disorders presumed to be inherited in three large Italian dog breeds in Italy.

PubMed

Guandalini, Adolfo; Di Girolamo, Nicola; Santillo, Daniele; Andreani, Valentina; Corvi, Roberta; Bandini, Marina; Peruccio, Claudio

2017-09-01

To describe the epidemiology and the types of eye disorders that are presumed to be inherited (PIED) in three large Italian dog breeds. Three large Italian dog breeds: Neapolitan Mastiff (FCI code: 197), Maremma Sheepdog (FCI code: 201), and Italian Corso dog (FCI code: 343). All dogs that underwent a complete ophthalmic examination between 1992 and 2012 were included in this prospective observational study. The prevalence of eye disorders with 95% confidence intervals was reported for presumed healthy dogs and for dogs referred to a veterinary center for an ophthalmic consultation. Univariate and multivariate logistic regression techniques were used to generate odds ratios. Of 605 dogs examined during the study period, 351 dogs were affected by at least one PIED (58%; 95% CI: 54-62%). The prevalence of PIED was significantly lower in dogs presented for ophthalmic examination (53.8%) as compared to presumed healthy dogs (62.2%)(OR: 1.4; 95% CI: 1.02-1.9; P = 0.037). Also after multivariate adjustment for the period of observation, the odds of Neapolitan Mastiff (92.1%; OR: 21.4; 95% CI: 11.1-41.4) and of Cane Corso (57.7%; OR: 2.5; 95% CI: 1.7-3.6) suffering a PIED were greater than the Maremma Sheepdog (35.4%). The most common PIED in each breed were entropion (24.3% of all the PIED) in the Neapolitan Mastiff, ectropion (36.6%) in the Corso dog, and cataract (27.9%) in the Maremma Sheepdog. Clinicians should be aware that three large Italian dog breeds frequently suffer PIED. Breed standards should be reconsidered, and breeding programs should be directed at limiting such disorders. © 2016 American College of Veterinary Ophthalmologists.

Vegetative Propagation and the Genetic Improvement of North American Hardwoods

Treesearch

R. E. Farmer

1973-01-01

Progress and problems in vegetative propagation of important North American hardwoods are reviewed with emphasis on rooting cuttings and the application of propagation techniques in breeding research. Some problems in rooting physiology are discussed.

Ecogeography and utility to plant breeding of the crop wild relatives of sunflower (Helianthus annuus L.)

PubMed Central

Kantar, Michael B.; Sosa, Chrystian C.; Khoury, Colin K.; Castañeda-Álvarez, Nora P.; Achicanoy, Harold A.; Bernau, Vivian; Kane, Nolan C.; Marek, Laura; Seiler, Gerald; Rieseberg, Loren H.

2015-01-01

Crop wild relatives (CWR) are a rich source of genetic diversity for crop improvement. Combining ecogeographic and phylogenetic techniques can inform both conservation and breeding. Geographic occurrence, bioclimatic, and biophysical data were used to predict species distributions, range overlap and niche occupancy in 36 taxa closely related to sunflower (Helianthus annuus L.). Taxa lacking comprehensive ex situ conservation were identified. The predicted distributions for 36 Helianthus taxa identified substantial range overlap, range asymmetry and niche conservatism. Specific taxa (e.g., Helianthus deblis Nutt., Helianthus anomalus Blake, and Helianthus divaricatus L.) were identified as targets for traits of interest, particularly for abiotic stress tolerance, and adaptation to extreme soil properties. The combination of techniques demonstrates the potential for publicly available ecogeographic and phylogenetic data to facilitate the identification of possible sources of abiotic stress traits for plant breeding programs. Much of the primary genepool (wild H. annuus) occurs in extreme environments indicating that introgression of targeted traits may be relatively straightforward. Sister taxa in Helianthus have greater range overlap than more distantly related taxa within the genus. This adds to a growing body of literature suggesting that in plants (unlike some animal groups), geographic isolation may not be necessary for speciation. PMID:26500675

Ecogeography and utility to plant breeding of the crop wild relatives of sunflower (Helianthus annuus L.).

PubMed

Kantar, Michael B; Sosa, Chrystian C; Khoury, Colin K; Castañeda-Álvarez, Nora P; Achicanoy, Harold A; Bernau, Vivian; Kane, Nolan C; Marek, Laura; Seiler, Gerald; Rieseberg, Loren H

2015-01-01

Crop wild relatives (CWR) are a rich source of genetic diversity for crop improvement. Combining ecogeographic and phylogenetic techniques can inform both conservation and breeding. Geographic occurrence, bioclimatic, and biophysical data were used to predict species distributions, range overlap and niche occupancy in 36 taxa closely related to sunflower (Helianthus annuus L.). Taxa lacking comprehensive ex situ conservation were identified. The predicted distributions for 36 Helianthus taxa identified substantial range overlap, range asymmetry and niche conservatism. Specific taxa (e.g., Helianthus deblis Nutt., Helianthus anomalus Blake, and Helianthus divaricatus L.) were identified as targets for traits of interest, particularly for abiotic stress tolerance, and adaptation to extreme soil properties. The combination of techniques demonstrates the potential for publicly available ecogeographic and phylogenetic data to facilitate the identification of possible sources of abiotic stress traits for plant breeding programs. Much of the primary genepool (wild H. annuus) occurs in extreme environments indicating that introgression of targeted traits may be relatively straightforward. Sister taxa in Helianthus have greater range overlap than more distantly related taxa within the genus. This adds to a growing body of literature suggesting that in plants (unlike some animal groups), geographic isolation may not be necessary for speciation.

Crop 3D-a LiDAR based platform for 3D high-throughput crop phenotyping.

PubMed

Guo, Qinghua; Wu, Fangfang; Pang, Shuxin; Zhao, Xiaoqian; Chen, Linhai; Liu, Jin; Xue, Baolin; Xu, Guangcai; Li, Le; Jing, Haichun; Chu, Chengcai

2018-03-01

With the growing population and the reducing arable land, breeding has been considered as an effective way to solve the food crisis. As an important part in breeding, high-throughput phenotyping can accelerate the breeding process effectively. Light detection and ranging (LiDAR) is an active remote sensing technology that is capable of acquiring three-dimensional (3D) data accurately, and has a great potential in crop phenotyping. Given that crop phenotyping based on LiDAR technology is not common in China, we developed a high-throughput crop phenotyping platform, named Crop 3D, which integrated LiDAR sensor, high-resolution camera, thermal camera and hyperspectral imager. Compared with traditional crop phenotyping techniques, Crop 3D can acquire multi-source phenotypic data in the whole crop growing period and extract plant height, plant width, leaf length, leaf width, leaf area, leaf inclination angle and other parameters for plant biology and genomics analysis. In this paper, we described the designs, functions and testing results of the Crop 3D platform, and briefly discussed the potential applications and future development of the platform in phenotyping. We concluded that platforms integrating LiDAR and traditional remote sensing techniques might be the future trend of crop high-throughput phenotyping.

Comparative regulatory approaches for groups of new plant breeding techniques.

PubMed

Lusser, Maria; Davies, Howard V

2013-06-25

This manuscript provides insights into ongoing debates on the regulatory issues surrounding groups of biotechnology-driven 'New Plant Breeding Techniques' (NPBTs). It presents the outcomes of preliminary discussions and in some cases the initial decisions taken by regulators in the following countries: Argentina, Australia, Canada, EU, Japan, South Africa and USA. In the light of these discussions we suggest in this manuscript a structured approach to make the evaluation more consistent and efficient. The issue appears to be complex as these groups of new technologies vary widely in both the technologies deployed and their impact on heritable changes in the plant genome. An added complication is that the legislation, definitions and regulatory approaches for biotechnology-derived crops differ significantly between these countries. There are therefore concerns that this situation will lead to non-harmonised regulatory approaches and asynchronous development and marketing of such crops resulting in trade disruptions. Copyright © 2013 Elsevier B.V. All rights reserved.

Retention of denture bases fabricated by three different processing techniques – An in vivo study

PubMed Central

Chalapathi Kumar, V. H.; Surapaneni, Hemchand; Ravikiran, V.; Chandra, B. Sarat; Balusu, Srilatha; Reddy, V. Naveen

2016-01-01

Aim: Distortion due to Polymerization shrinkage compromises the retention. To evaluate the amount of retention of denture bases fabricated by conventional, anchorized, and injection molding polymerization techniques. Materials and Methods: Ten completely edentulous patients were selected, impressions were made, and master cast obtained was duplicated to fabricate denture bases by three polymerization techniques. Loop was attached to the finished denture bases to estimate the force required to dislodge them by retention apparatus. Readings were subjected to nonparametric Friedman two-way analysis of variance followed by Bonferroni correction methods and Wilcoxon matched-pairs signed-ranks test. Results: Denture bases fabricated by injection molding (3740 g), anchorized techniques (2913 g) recorded greater retention values than conventional technique (2468 g). Significant difference was seen between these techniques. Conclusions: Denture bases obtained by injection molding polymerization technique exhibited maximum retention, followed by anchorized technique, and least retention was seen in conventional molding technique. PMID:27382542

Genetic Engineering of Alfalfa (Medicago sativa L.).

PubMed

Wang, Dan; Khurshid, Muhammad; Sun, Zhan Min; Tang, Yi Xiong; Zhou, Mei Liang; Wu, Yan Min

2016-01-01

Alfalfa is excellent perennial legume forage for its extensive ecological adaptability, high nutrition value, palatability and biological nitrogen fixation. It plays a very important role in the agriculture, animal husbandry and ecological construction. It is cultivated in all continents. With the development of modern plant breeding and genetic engineering techniques, a large amount of work has been carried out on alfalfa. Here we summarize the recent research advances in genetic engineering of alfalfa breeding, including transformation, quality improvement, stress resistance and as a bioreactor. The review article can enables us to understand the research method, direction and achievements of genetic engineering technology of Alfalfa.

Side effects and complications of intraosseous anesthesia and conventional oral anesthesia.

PubMed

Peñarrocha-Oltra, David; Ata-Ali, Javier; Oltra-Moscardó, María-José; Peñarrocha-Diago, María; Peñarrocha, Miguel

2012-05-01

To analyze the side effects and complications following intraosseous anesthesia (IA), comparing them with those of the conventional oral anesthesia techniques. A simple-blind, prospective clinical study was carried out. Each patient underwent two anesthetic techniques: conventional (local infiltration and locoregional anesthetic block) and intraosseous, for respective dental operations. In order to allow comparison of IA versus conventional anesthesia, the two operations were similar and affected the same two teeth in opposite quadrants. Heart rate was recorded in all cases before injection of the anesthetic solution and again 30 seconds after injection. The complications observed after anesthetic administration were recorded. A total of 200 oral anesthetic procedures were carried out in 100 patients. Both IA and conventional anesthesia resulted in a significant increase in heart rate, though the increase was greater with the latter technique. Incidents were infrequent with either anesthetic technique, with no significant differences between them. Regarding the complications, there were significant differences in pain at the injection site, with more intense pain in the case of IA (x2=3.532, p=0.030, Φ2=0.02), while the limitation of oral aperture was more pronounced with conventional anesthesia (x2=5.128, p<0.05, Φ2=0.014). Post-anesthetic biting showed no significant differences (x2=4.082, p=0.121, Φ2=0.009). Both anesthetic techniques significantly increased heart rate, and IA caused comparatively more pain at the injection site, while limited oral aperture was more frequent with conventional anesthesia. Post-anesthetic biting showed no significant differences between the two techniques.

A Retrospective Comparison of Conventional versus Transverse Mini-Incision Technique for Carpal Tunnel Release

PubMed Central

Gülşen, İsmail; Ak, Hakan; Evcılı, Gökhan; Balbaloglu, Özlem; Sösüncü, Enver

2013-01-01

Background. In this retrospective study, we aimed to compare the results of two surgical techniques, conventional and transverse mini-incision. Materials and Methods. 95 patients were operated between 2011 and 2012 in Bitlis State Hospital. 50 patients were operated with conventional technique and 45 of them were operated with minimal transverse incision. Postoperative complications, incision site problems, and the time of starting to use their hands in daily activities were noted. Results. 95 patients were included in the study. The mean age was 48. 87 of them were female and 8 were male. There was no problem of incision site in both of the two surgical techniques. Only in one patient, anesthesia developed in minimal incision technique. The time of starting to use their hands in daily activities was 22,2 days and 17 days in conventional and minimal incision technique, respectively. Conclusion. Two surgical techniques did not show superiority to each other in terms of postoperative complications and incision site problems except the time of starting to use their hands in daily activities. PMID:24396607

Comparison of three different adenoidectomy techniques in children - has the conventional technique been surpassed?

PubMed

Ferreira, Mayra Soares; Mangussi-Gomes, João; Ximendes, Roberta; Evangelista, Anne Rosso; Miranda, Eloá Lumi; Garcia, Leonardo Bomediano; Stamm, Aldo C

2018-01-01

Pharyngeal tonsil hyperplasia is the most frequent cause of nasal obstruction and chronic mouth breathing during childhood. Adenoidectomy is the procedure of choice for the resolution of these symptoms. It is not yet known, however, whether the conventional technique ("blind curettage") has been surpassed by more modern adenoidectomy techniques (video-assisted, with the aid of instruments). This study aimed to compare the conventional adenoidectomy technique with two other emerging techniques, performed in a reference otorhinolaryngology center. This is a prospective and observational study of 33 children submitted to adenoidectomy using 3 different techniques that were followed up for a period of 3 months after surgery. The patients were divided into 3 different groups, according to the adenoidectomy technique: Group A (conventional technique - "blind curettage"); Group B (video-assisted adenoidectomy with microdebrider); Group C (video-assisted adenoidectomy with radiofrequency - Coblation ® ). The surgical time of each procedure was measured, being considered from the moment of insertion of the mouth gag until complete hemostasis was achieved. The questionnaire for quality of life OSA-18 was applied to all caregivers on the day of the surgery and 30-90 days after the procedure. Postoperative complications were also analyzed. For the entire patient sample, there was an improvement in quality of life after the surgery (p < 0.05). When analyzing the evolution of OSA-18 index, all groups showed statistically significant improvement, for all assessed domains. There were no statistically significant differences between the 3 techniques assessed for quality of life improvement after the surgery (p > 0.05). Regarding the duration of the procedure, the conventional technique showed the shortest surgical time when compared to the others (p < 0.05). No postoperative complications were noted, for any patient. The adenoidectomy resulted in improvement of quality of life, and there were no major postoperative complications, for all operated children, regardless of the technique used. The conventional technique was faster when compared to the more modern adenoidectomy techniques. Copyright © 2017 Elsevier B.V. All rights reserved.

Growth, reproductive performance, carcass characteristics and meat quality in F1 and F2 progenies of somatic cell-cloned pigs.

PubMed

Adachi, Noritaka; Yamaguchi, Daisuke; Watanabe, Akiyuki; Miura, Narumi; Sunaga, Seiji; Oishi, Hitoshi; Hashimoto, Michiko; Oishi, Takatsugu; Iwamoto, Masaki; Hanada, Hirofumi; Kubo, Masanori; Onishi, Akira

2014-04-24

The objective of this study was to examine the health and meat production of cloned sows and their progenies in order to demonstrate the application of somatic cell cloning to the pig industry. This study compared the growth, reproductive performance, carcass characteristics and meat quality of Landrace cloned sows, F1 progenies and F2 progenies. We measured their body weight, growth rate and feed conversion and performed a pathological analysis of their anatomy to detect abnormalities. Three of the five cloned pigs were used for a growth test. Cloned pigs grew normally and had characteristics similar to those of the control purebred Landrace pigs. Two cloned gilts were bred with a Landrace boar and used for a progeny test. F1 progenies had characteristics similar to those of the controls. Two of the F1 progeny gilts were bred with a Duroc or Large White boar and used for the progeny test. F2 progenies grew normally. There were no biological differences in growth, carcass characteristics and amino acid composition among cloned sows, F1 progenies, F2 progenies and conventional pigs. The cloned sows and F1 progenies showed normal reproductive performance. No specific abnormalities were observed by pathological analysis, with the exception of periarteritis in the F1 progenies. All pigs had a normal karyotype. These results demonstrate that cloned female pigs and their progenies have similar growth, reproductive performance and carcass quality characteristics and that somatic cell cloning could be a useful technique for conserving superior pig breeds in conventional meat production.

Growth, Reproductive Performance, Carcass Characteristics and Meat Quality in F1 and F2 Progenies of Somatic Cell-Cloned Pigs

PubMed Central

ADACHI, Noritaka; YAMAGUCHI, Daisuke; WATANABE, Akiyuki; MIURA, Narumi; SUNAGA, Seiji; OISHI, Hitoshi; HASHIMOTO, Michiko; OISHI, Takatsugu; IWAMOTO, Masaki; HANADA, Hirofumi; KUBO, Masanori; ONISHI, Akira

2014-01-01

The objective of this study was to examine the health and meat production of cloned sows and their progenies in order to demonstrate the application of somatic cell cloning to the pig industry. This study compared the growth, reproductive performance, carcass characteristics and meat quality of Landrace cloned sows, F1 progenies and F2 progenies. We measured their body weight, growth rate and feed conversion and performed a pathological analysis of their anatomy to detect abnormalities. Three of the five cloned pigs were used for a growth test. Cloned pigs grew normally and had characteristics similar to those of the control purebred Landrace pigs. Two cloned gilts were bred with a Landrace boar and used for a progeny test. F1 progenies had characteristics similar to those of the controls. Two of the F1 progeny gilts were bred with a Duroc or Large White boar and used for the progeny test. F2 progenies grew normally. There were no biological differences in growth, carcass characteristics and amino acid composition among cloned sows, F1 progenies, F2 progenies and conventional pigs. The cloned sows and F1 progenies showed normal reproductive performance. No specific abnormalities were observed by pathological analysis, with the exception of periarteritis in the F1 progenies. All pigs had a normal karyotype. These results demonstrate that cloned female pigs and their progenies have similar growth, reproductive performance and carcass quality characteristics and that somatic cell cloning could be a useful technique for conserving superior pig breeds in conventional meat production. PMID:24492641

How biological background assumptions influence scientific risk evaluation of stacked genetically modified plants: an analysis of research hypotheses and argumentations.

PubMed

Rocca, Elena; Andersen, Fredrik

2017-08-14

Scientific risk evaluations are constructed by specific evidence, value judgements and biological background assumptions. The latter are the framework-setting suppositions we apply in order to understand some new phenomenon. That background assumptions co-determine choice of methodology, data interpretation, and choice of relevant evidence is an uncontroversial claim in modern basic science. Furthermore, it is commonly accepted that, unless explicated, disagreements in background assumptions can lead to misunderstanding as well as miscommunication. Here, we extend the discussion on background assumptions from basic science to the debate over genetically modified (GM) plants risk assessment. In this realm, while the different political, social and economic values are often mentioned, the identity and role of background assumptions at play are rarely examined. We use an example from the debate over risk assessment of stacked genetically modified plants (GM stacks), obtained by applying conventional breeding techniques to GM plants. There are two main regulatory practices of GM stacks: (i) regulate as conventional hybrids and (ii) regulate as new GM plants. We analyzed eight papers representative of these positions and found that, in all cases, additional premises are needed to reach the stated conclusions. We suggest that these premises play the role of biological background assumptions and argue that the most effective way toward a unified framework for risk analysis and regulation of GM stacks is by explicating and examining the biological background assumptions of each position. Once explicated, it is possible to either evaluate which background assumptions best reflect contemporary biological knowledge, or to apply Douglas' 'inductive risk' argument.

Engineering the lodging resistance mechanism of post-Green Revolution rice to meet future demands.

PubMed

Hirano, Ko; Ordonio, Reynante Lacsamana; Matsuoka, Makoto

2017-01-01

Traditional breeding for high-yielding rice has been dependent on the widespread cultivation of gibberellin (GA)-deficient semi-dwarf varieties. Dwarfism lowers the "center of gravity" of the plant body, which increases resistance against lodging and enables plants to support high grain yield. Although this approach was successful in latter half of the 20th century in rice and wheat breeding, this may no longer be enough to sustain rice with even higher yields. This is because relying solely on the semi-dwarf trait is subject to certain limitations, making it necessary to use other important traits to reinforce it. In this review, we present an alternative approach to increase lodging resistance by improving the quality of the culm by identifying genes related to culm quality and introducing these genes into high-yielding rice cultivars through molecular breeding technique.

Llama reproduction.

PubMed

Johnson, L W

1989-03-01

The reproductive anatomy, physiology, and breeding behavior of the llama is unique enough to make familiarity with it imperative. Female puberty averages 12 months, while many males are not reproductively functional until after 3 years. Proper management of a breeding pair or herd is necessary to maintain maximum reproductive performance. Proof of pregnancy is suggested by rejection of the male and may/should be confirmed by progesterone assay, rectal palpation, or ultrasound techniques. The postpartum female is notable for breeding back rapidly, with high pregnancy rates resulting. Both male and female factors enter into llama infertility, with each gender having significant incidence of reproductive anatomical abnormalities. Management as well as acquired infertility problems (heat factors, trauma, infection, neoplasia, and hormonal imbalances) contribute to the bulk of infertility cases investigated. Techniques used to diagnose infertility in llamas are quite comparable to the equine species; however, female body size and semen analysis in the male present significant challenges. The approach to therapy has been quite empirical to date, owing to lack of consistent problems and numbers to afford conclusive trials. Alterations of pregnancy include resorption, abortions, and stillbirths. Resorption between 30 to 60 days of gestation is reported regularly. Abortions caused by stress occur regularly. Infection abortions caused by leptospirosis, toxoplasmosis, and chlamydiosis are to be expected. Ponderosa pine-related abortions are suspected. In summary, I find use for a broad background in large animal theriogenology to apply to llama infertility. There no doubt are additional diagnostic techniques and therapeutic regimens that have application, and it is up to us all to keep good records and share the information.

Darbishire expands his vision of heredity from Mendelian genetics to inherited memory.

PubMed

Wood, Roger J

2015-10-01

The British biologist A.D. Darbishire (1879-1915) responded to the rediscovery in 1900 of Mendel's theory of heredity by testing it experimentally, first in Oxford, then in Manchester and London. He summarised his conclusions in a textbook 'Breeding and the Mendelian Discovery' (1911), in which he questioned whether Mendelism alone could explain all aspects of practical breeding experience. Already he had begun to think about an alternative theory to give greater emphasis to the widely held conviction among breeders regarding the inheritance of characteristics acquired during an individual's life. Redefining heredity in terms of a germ-plasm based biological memory, he used vocabulary drawn partly from sources outside conventional science, including the metaphysical/vitalistic writings of Samuel Butler and Henri Bergson. An evolving hereditary memory fitted well with the conception of breeding as a creative art aimed at greater economic efficiency. For evolution beyond human control he proposed a self-modifying process, claiming it to surpass in efficiency the chancy mechanism of natural selection proposed by Darwin. From his writings, including early chapters of an unfinished book entitled 'An Introduction to a Biology', we consider how he reached these concepts and how they relate to later advances in understanding the genome and the genetic programme. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Influence of Dams on Malaria Transmission in Sub-Saharan Africa.

PubMed

Kibret, Solomon; Wilson, G Glenn; Ryder, Darren; Tekie, Habte; Petros, Beyene

2017-06-01

The construction of dams in sub-Saharan Africa is pivotal for food security and alleviating poverty in the region. However, the unintended adverse public health implications of extending the spatial distribution of water infrastructure are poorly documented and may minimize the intended benefits of securing water supplies. This paper reviews existing studies on the influence of dams on the spatial distribution of malaria parasites and vectors in sub-Saharan Africa. Common themes emerging from the literature were that dams intensified malaria transmission in semi-arid and highland areas with unstable malaria transmission but had little or no impact in areas with perennial transmission. Differences in the impacts of dams resulted from the types and characteristics of malaria vectors and their breeding habitats in different settings of sub-Saharan Africa. A higher abundance of a less anthropophilic Anopheles arabiensis than a highly efficient vector A. gambiae explains why dams did not increase malaria in stable areas. In unstable areas where transmission is limited by availability of water bodies for vector breeding, dams generally increase malaria by providing breeding habitats for prominent malaria vector species. Integrated vector control measures that include reservoir management, coupled with conventional malaria control strategies, could optimize a reduction of the risk of malaria transmission around dams in the region.

Meiotic behavior as a selection tool in silage corn breeding.

PubMed

Souza, V F; Pagliarini, M S; Scapim, C A; Rodovalho, M; Faria, M V

2010-10-19

In breeding programs, commercial hybrids are frequently used as a source of inbred lines to obtain new hybrids. Considering that maize production is dependent on viable gametes, the selection of populations to obtain inbred lines with high meiotic stability could contribute to the formation of new silage corn hybrids adapted to specific region. We evaluated the meiotic stability of five commercial hybrids of silage corn used in southern Brazil with conventional squashing methods. All of them showed meiotic abnormalities. Some abnormalities, such as abnormal chromosome segregation and absence of cytokinesis, occurred in all the genotypes, while others, including cytomixis and abnormal spindle orientation, were found only in some genotypes. The hybrid SG6010 had the lowest mean frequency of abnormal cells (21.27%); the highest frequency was found in the hybrid P30K64 (44.43%). However, the frequency of abnormal meiotic products was much lower in most genotypes, ranging from 7.63% in the hybrid CD304 to 43.86% in Garra. Taking into account the percentage of abnormal meiotic products and, hence, meiotic stability, only the hybrids CD304, P30K64, SG6010, and P30F53 are recommended to be retained in the breeding program to obtain inbred lines to create new hybrids.

Tomato as a Source of Carotenoids and Polyphenols Targeted to Cancer Prevention

PubMed Central

Martí, Raúl; Roselló, Salvador; Cebolla-Cornejo, Jaime

2016-01-01

A diet rich in vegetables has been associated with a reduced risk of many diseases related to aging and modern lifestyle. Over the past several decades, many researches have pointed out the direct relation between the intake of bioactive compounds present in tomato and a reduced risk of suffering different types of cancer. These bioactive constituents comprise phytochemicals such as carotenoids and polyphenols. The direct intake of these chemoprotective molecules seems to show higher efficiencies when they are ingested in its natural biological matrix than when they are ingested isolated or in dietary supplements. Consequently, there is a growing trend for improvement of the contents of these bioactive compounds in foods. The control of growing environment and processing conditions can ensure the maximum potential accumulation or moderate the loss of bioactive compounds, but the best results are obtained developing new varieties via plant breeding. The modification of single steps of metabolic pathways or their regulation via conventional breeding or genetic engineering has offered excellent results in crops such as tomato. In this review, we analyse the potential of tomato as source of the bioactive constituents with cancer-preventive properties and the result of modern breeding programs as a strategy to increase the levels of these compounds in the diet. PMID:27331820

Non-conventional solvents in liquid phase microextraction and aqueous biphasic systems.

PubMed

An, Jiwoo; Trujillo-Rodríguez, María J; Pino, Verónica; Anderson, Jared L

2017-06-02

The development of rapid, convenient, and high throughput sample preparation approaches such as liquid phase microextraction techniques have been continuously developed over the last decade. More recently, significant attention has been given to the replacement of conventional organic solvents used in liquid phase microextraction techniques in order to reduce toxic waste and to improve selectivity and/or extraction efficiency. With these objectives, non-conventional solvents have been explored in liquid phase microextraction and aqueous biphasic systems. The utilized non-conventional solvents include ionic liquids, magnetic ionic liquids, and deep eutectic solvents. They have been widely used as extraction solvents or additives in various liquid phase microextraction modes including dispersive liquid-liquid microextraction, single-drop microextraction, hollow fiber-liquid phase microextraction, as well as in aqueous biphasic systems. This review provides an overview into the use of non-conventional solvents in these microextraction techniques in the past 5 years (2012-2016). Analytical applications of the techniques are also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

A rigorous assessment of tree height measurements obtained using airborne LIDAR and conventional field methods.

Treesearch

Hans-Erik Andersen; Stephen E. Reutebuch; Robert J. McGaughey

2006-01-01

Tree height is an important variable in forest inventory programs but is typically time-consuming and costly to measure in the field using conventional techniques. Airborne light detection and ranging (LIDAR) provides individual tree height measurements that are highly correlated with field-derived measurements, but the imprecision of conventional field techniques does...

Microbiome Selection Could Spur Next-Generation Plant Breeding Strategies.

PubMed

Gopal, Murali; Gupta, Alka

2016-01-01

" No plant is an island too …" Plants, though sessile, have developed a unique strategy to counter biotic and abiotic stresses by symbiotically co-evolving with microorganisms and tapping into their genome for this purpose. Soil is the bank of microbial diversity from which a plant selectively sources its microbiome to suit its needs. Besides soil, seeds, which carry the genetic blueprint of plants during trans-generational propagation, are home to diverse microbiota that acts as the principal source of microbial inoculum in crop cultivation. Overall, a plant is ensconced both on the outside and inside with a diverse assemblage of microbiota. Together, the plant genome and the genes of the microbiota that the plant harbors in different plant tissues, i.e., the 'plant microbiome,' form the holobiome which is now considered as unit of selection: 'the holobiont.' The 'plant microbiome' not only helps plants to remain fit but also offers critical genetic variability, hitherto, not employed in the breeding strategy by plant breeders, who traditionally have exploited the genetic variability of the host for developing high yielding or disease tolerant or drought resistant varieties. This fresh knowledge of the microbiome, particularly of the rhizosphere, offering genetic variability to plants, opens up new horizons for breeding that could usher in cultivation of next-generation crops depending less on inorganic inputs, resistant to insect pest and diseases and resilient to climatic perturbations. We surmise, from ever increasing evidences, that plants and their microbial symbionts need to be co-propagated as life-long partners in future strategies for plant breeding. In this perspective, we propose bottom-up approach to co-propagate the co-evolved, the plant along with the target microbiome, through - (i) reciprocal soil transplantation method, or (ii) artificial ecosystem selection method of synthetic microbiome inocula, or (iii) by exploration of microRNA transfer method - for realizing this next-generation plant breeding approach. Our aim, thus, is to bring closer the information accrued through the advanced nucleotide sequencing and bioinformatics in conjunction with conventional culture-dependent isolation method for practical application in plant breeding and overall agriculture.

An Ingenious Modification in Conventional Swing Lock Cast Partial Denture for Rehabilitating A Hemi Mandibulectomy Defect.

PubMed

Shah, Rupal Jaydip; Lagdive, Sanjay Balaji; Saini, Shraddha Lalit; Verma, Vishal Bipinbihari; Shah, Satyaprakash Ranjit

2017-01-01

Mandibular resections compromise the balance and symmetry of mandibular functions. Since centuries there has been advent of various prosthetic treatment modalities to improve the masticatory efficiency. Swing lock dentures, a treatment facet with high degree of clinical effectiveness, yet gradually fading into oblivion due to its design complexities, has been resurrected by retaining its indigenous concept of reciprocation, and consolidating aesthetics with introduction of newer breed of aesthetic material (Thermoplastic Acetal resin).

Topographic models for predicting malaria vector breeding habitats: potential tools for vector control managers.

PubMed

Nmor, Jephtha C; Sunahara, Toshihiko; Goto, Kensuke; Futami, Kyoko; Sonye, George; Akweywa, Peter; Dida, Gabriel; Minakawa, Noboru

2013-01-16

Identification of malaria vector breeding sites can enhance control activities. Although associations between malaria vector breeding sites and topography are well recognized, practical models that predict breeding sites from topographic information are lacking. We used topographic variables derived from remotely sensed Digital Elevation Models (DEMs) to model the breeding sites of malaria vectors. We further compared the predictive strength of two different DEMs and evaluated the predictability of various habitat types inhabited by Anopheles larvae. Using GIS techniques, topographic variables were extracted from two DEMs: 1) Shuttle Radar Topography Mission 3 (SRTM3, 90-m resolution) and 2) the Advanced Spaceborne Thermal Emission Reflection Radiometer Global DEM (ASTER, 30-m resolution). We used data on breeding sites from an extensive field survey conducted on an island in western Kenya in 2006. Topographic variables were extracted for 826 breeding sites and for 4520 negative points that were randomly assigned. Logistic regression modelling was applied to characterize topographic features of the malaria vector breeding sites and predict their locations. Model accuracy was evaluated using the area under the receiver operating characteristics curve (AUC). All topographic variables derived from both DEMs were significantly correlated with breeding habitats except for the aspect of SRTM. The magnitude and direction of correlation for each variable were similar in the two DEMs. Multivariate models for SRTM and ASTER showed similar levels of fit indicated by Akaike information criterion (3959.3 and 3972.7, respectively), though the former was slightly better than the latter. The accuracy of prediction indicated by AUC was also similar in SRTM (0.758) and ASTER (0.755) in the training site. In the testing site, both SRTM and ASTER models showed higher AUC in the testing sites than in the training site (0.829 and 0.799, respectively). The predictability of habitat types varied. Drains, foot-prints, puddles and swamp habitat types were most predictable. Both SRTM and ASTER models had similar predictive potentials, which were sufficiently accurate to predict vector habitats. The free availability of these DEMs suggests that topographic predictive models could be widely used by vector control managers in Africa to complement malaria control strategies.

Modified fluoroscopy-guided sacroiliac joint injection: a technical report.

PubMed

Liliang, Po-Chou; Liang, Cheng-Loong; Lu, Kang; Weng, Hui-Ching; Syu, Fei-Kai

2014-09-01

Sacroiliac joint (SIJ) injection can occasionally be challenging. We describe our experience in using conventional technique, and we developed an adjustment to overcome difficulties incurred. Conventional technique required superimposition of the posterior and anterior SIJ lines. If this technique failed to provide entry into the joint, fluoroscopy was slightly adjusted to obtain an oblique view. Of 50 SIJ injections, 29 (58%; 44-72%) were successfully performed using conventional technique. In another 21 procedures, 18 (85.7%; 64-99%) were subsequently completed using oblique view technique. The medial joint line, viewed from this angle, corresponded to the posterior joint line in 17 cases. The lateral joint line corresponded to the posterior joint line in one case. Oblique view technique can improve the success rate of SIJ injection. Wiley Periodicals, Inc.

Research and Technology Development for Genetic Improvement of Switchgrass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kausch, Albert; Rhodes, Richard

This research adds to the understanding of switchgrass genetics and the increasing of biomass relevant to production of bioenergy. Switchgrass, Panicum virgatum L., and its related species are well known as potential bioenergy crops since the early 1990s. There are global economic, political, US national security and environmental pressures to increase renewable biofuel production and utilization to offset gasoline and diesel fuel use and climate change, especially in the liquid fuel transportation sector. To realize the potential of bioenergy crops, rapid genetic improvement of the most promising perennial grass feedstocks, such as switchgrass, are anticipated by current genomics, association genetics,more » marker assisted breeding, hybrid plant development, advanced tissue culture, conventional genetics and other approaches to increase yield, processability, and regional adaptation. The technical effectiveness and economic feasibility of the methods or techniques investigated are demonstrated by several publications, presentations and patents produced as an outcome and deliverable of this research. This project is of a broad benefit to the public not only through the dissemination of this information but also to the development of new methods which will be applied to future bioenergy crop improvement as well as other crops.« less

Wildlife conservation and reproductive cloning.

PubMed

Holt, William V; Pickard, Amanda R; Prather, Randall S

2004-03-01

Reproductive cloning, or the production of offspring by nuclear transfer, is often regarded as having potential for conserving endangered species of wildlife. Currently, however, low success rates for reproductive cloning limit the practical application of this technique to experimental use and proof of principle investigations. In this review, we consider how cloning may contribute to wildlife conservation strategies. The cloning of endangered mammals presents practical problems, many of which stem from the paucity of knowledge about their basic reproductive biology. However, situations may arise where resources could be targeted at recovering lost or under-represented genetic lines; these could then contribute to the future fitness of the population. Approaches of this type would be preferable to the indiscriminate generation of large numbers of identical individuals. Applying cloning technology to non-mammalian vertebrates may be more practical than attempting to use conventional reproductive technologies. As the scientific background to cloning technology was pioneered using amphibians, it may be possible to breed imminently threatened amphibians, or even restore extinct amphibian species, by the use of cloning. In this respect species with external embryonic development may have an advantage over mammals as developmental abnormalities associated with inappropriate embryonic reprogramming would not be relevant.

DC-DC Type High-Frequency Link DC for Improved Power Quality of Cascaded Multilevel Inverter

NASA Astrophysics Data System (ADS)

Sadikin, Muhammad; Senjyu, Tomonobu; Yona, Atsushi

2013-06-01

Multilevel inverters are emerging as a new breed of power converter options for power system applications. Recent advances in power switching devices enabled the suitability of multilevel inverters for high voltage and high power applications because they are connecting several devices in series without the need of component matching. Usually, a transformerless battery energy storage system, based on a cascaded multilevel inverter, is used as a measure for voltage and frequency deviations. System can be reduced in size, weight, and cost of energy storage system. High-frequency link circuit topology is advantageous in realizing compact and light-weight power converters for uninterruptible power supply systems, new energy systems using photovoltaic-cells, fuel-cells and so on. This paper presents a DC-DC type high-frequency link DC (HFLDC) cascaded multilevel inverter. Each converter cell is implemented a control strategy for two H-bridge inverters that are controlled with the same multicarrier pulse width modulation (PWM) technique. The proposed cascaded multilevel inverter generates lower voltage total harmonic distortion (THD) in comparison with conventional cascaded multilevel inverter. Digital simulations are carried out using PSCAD/EMTDC to validate the performance of the proposed cascaded multilevel inverter.

Evaluating environmental impacts of contrasting pig farming systems with life cycle assessment.

PubMed

Dourmad, J Y; Ryschawy, J; Trousson, T; Bonneau, M; Gonzàlez, J; Houwers, H W J; Hviid, M; Zimmer, C; Nguyen, T L T; Morgensen, L

2014-12-01

Environmental impacts of 15 European pig farming systems were evaluated in the European Union Q-PorkChains project using life cycle assessment. One conventional and two non-conventional systems were evaluated from each of the five countries: Denmark, The Netherlands, Spain, France and Germany. The data needed for calculations were obtained from surveys of 5 to 10 farms from each system. The systems studied were categorised into conventional (C), adapted conventional (AC), traditional (T) and organic (O). Compared with C systems, AC systems differed little, with only minor changes to improve meat quality, animal welfare or environmental impacts, depending on the system. The difference was much larger for T systems, using very fat, slow-growing traditional breeds and generally outdoor raising of fattening pigs. Environmental impacts were calculated at the farm gate and expressed per kg of pig live weight and per ha of land used. For C systems, impacts per kg LW for climate change, acidification, eutrophication, energy use and land occupation were 2.3 kg CO2-eq, 44.0 g SO2-eq, 18.5 g PO4-eq, 16.2 MJ and 4.1 m2, respectively. Compared with C, differences in corresponding mean values were +13%, +5%, 0%, +2% and +16% higher for AC; +54%, +79%, +23%, +50% and +156% for T, and +4%, -16%, +29%, +11% and +121% for O. Conversely, when expressed per ha of land use, mean impacts were 10% to 60% lower for T and O systems, depending on the impact category. This was mainly because of higher land occupation per kg of pig produced, owing to feed production and the outdoor raising of sows and/or fattening pigs. The use of straw bedding tended to increase climate change impact per kg LW. The use of traditional local breeds, with reduced productivity and feed efficiency, resulted in higher impacts per kg LW for all impact categories. T systems with extensive outdoor raising of pigs resulted in markedly lower impact per ha of land used. Eutrophication potential per ha was substantially lower for O systems. Conventional systems had lower global impacts (global warming, energy use, land use), expressed per kg LW, whereas differentiated systems had lower local impacts (eutrophication, acidification), expressed per ha of land use.

Comparison of the production, quality, and in vitro maturation capacity of oocytes from untreated cycling and intermediate phase equine serum gonadotropin-treated fat-tailed dunnarts (Sminthopsis crassicaudata).

PubMed

Czarny, N A; Garnham, J I; Harris, M S; Rodger, J C

2009-07-01

This study describes ovarian changes during the natural and stimulated reproductive cycle of breeding (< or =12 month) and retired (>12 month) fat-tailed dunnarts, Sminthopsis crassicaudata. Increased urinary cornified epithelial cells and the influx of leukocytes defined day 0, at which time the naturally cycling females had already ovulated; at day 16 females had no antral follicles, but by day 20 antral follicles had begun to develop. There was no difference between naturally cycling breeding and retired females. Females were stimulated with 1 IU equine serum gonadotropin (eSG) during the intermediate phase on day 16 and killed 3, 4, or 5 days later. Stimulation resulted in a significant increase in the number of growing antral follicles but retired females demonstrated a reduced response. Upon collection from breeding females 4 days following eSG stimulation, 100% of oocytes were at the first polar body (PB1) stage, those collected from retired females were immature upon collection but within 48 h 98.2+/-1.9% were cultured to the PB1 stage. The rate of ovulation was high in breeding females 5 days following stimulation but retired females were less reliable, and in both groups all oocytes were degraded. This is the first study to describe a reliable technique, involving ovarian stimulation during the intermediate phase and segregation of age groups, allowing the collection of a large number of healthy PB1 stage oocytes from S. crassicaudata. This is important for the development of further assisted reproductive techniques for this species and threatened dasyurids.

Reduced generation time of apple seedlings to within a year by means of a plant virus vector: a new plant-breeding technique with no transmission of genetic modification to the next generation.

PubMed

Yamagishi, Noriko; Kishigami, Ryusuke; Yoshikawa, Nobuyuki

2014-01-01

Fruit trees have a long juvenile phase. For example, the juvenile phase of apple (Malus × domestica) generally lasts for 5-12 years and is a serious constraint for genetic analysis and for creating new apple cultivars through cross-breeding. If modification of the genes involved in the transition from the juvenile phase to the adult phase can enable apple to complete its life cycle within 1 year, as seen in herbaceous plants, a significant enhancement in apple breeding will be realized. Here, we report a novel technology that simultaneously promotes expression of Arabidopsis FLOWERING LOCUS T gene (AtFT) and silencing of apple TERMINAL FLOWER 1 gene (MdTFL1-1) using an Apple latent spherical virus (ALSV) vector (ALSV-AtFT/MdTFL1) to accelerate flowering time and life cycle in apple seedlings. When apple cotyledons were inoculated with ALSV-AtFT/MdTFL1 immediately after germination, more than 90% of infected seedlings started flowering within 1.5-3 months, and almost all early-flowering seedlings continuously produced flower buds on the lateral and axillary shoots. Cross-pollination between early-flowering apple plants produced fruits with seeds, indicating that ALSV-AtFT/MdTFL1 inoculation successfully reduced the time required for completion of the apple life cycle to 1 year or less. Apple latent spherical virus was not transmitted via seeds to successive progenies in most cases, and thus, this method will serve as a new breeding technique that does not pass genetic modification to the next generation. © 2013 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

Dimensional changes of acrylic resin denture bases: conventional versus injection-molding technique.

PubMed

Gharechahi, Jafar; Asadzadeh, Nafiseh; Shahabian, Foad; Gharechahi, Maryam

2014-07-01

Acrylic resin denture bases undergo dimensional changes during polymerization. Injection molding techniques are reported to reduce these changes and thereby improve physical properties of denture bases. The aim of this study was to compare dimensional changes of specimens processed by conventional and injection-molding techniques. SR-Ivocap Triplex Hot resin was used for conventional pressure-packed and SR-Ivocap High Impact was used for injection-molding techniques. After processing, all the specimens were stored in distilled water at room temperature until measured. For dimensional accuracy evaluation, measurements were recorded at 24-hour, 48-hour and 12-day intervals using a digital caliper with an accuracy of 0.01 mm. Statistical analysis was carried out by SPSS (SPSS Inc., Chicago, IL, USA) using t-test and repeated-measures ANOVA. Statistical significance was defined at P<0.05. After each water storage period, the acrylic specimens produced by injection exhibited less dimensional changes compared to those produced by the conventional technique. Curing shrinkage was compensated by water sorption with an increase in water storage time decreasing dimensional changes. Within the limitations of this study, dimensional changes of acrylic resin specimens were influenced by the molding technique used and SR-Ivocap injection procedure exhibited higher dimensional accuracy compared to conventional molding.

Dimensional Changes of Acrylic Resin Denture Bases: Conventional Versus Injection-Molding Technique

PubMed Central

Gharechahi, Jafar; Asadzadeh, Nafiseh; Shahabian, Foad; Gharechahi, Maryam

2014-01-01

Objective: Acrylic resin denture bases undergo dimensional changes during polymerization. Injection molding techniques are reported to reduce these changes and thereby improve physical properties of denture bases. The aim of this study was to compare dimensional changes of specimens processed by conventional and injection-molding techniques. Materials and Methods: SR-Ivocap Triplex Hot resin was used for conventional pressure-packed and SR-Ivocap High Impact was used for injection-molding techniques. After processing, all the specimens were stored in distilled water at room temperature until measured. For dimensional accuracy evaluation, measurements were recorded at 24-hour, 48-hour and 12-day intervals using a digital caliper with an accuracy of 0.01 mm. Statistical analysis was carried out by SPSS (SPSS Inc., Chicago, IL, USA) using t-test and repeated-measures ANOVA. Statistical significance was defined at P<0.05. Results: After each water storage period, the acrylic specimens produced by injection exhibited less dimensional changes compared to those produced by the conventional technique. Curing shrinkage was compensated by water sorption with an increase in water storage time decreasing dimensional changes. Conclusion: Within the limitations of this study, dimensional changes of acrylic resin specimens were influenced by the molding technique used and SR-Ivocap injection procedure exhibited higher dimensional accuracy compared to conventional molding. PMID:25584050

Intraseptal anesthesia: a review of a relevant injection technique.

PubMed

Woodmansey, Karl

2005-01-01

Although overshadowed by intraosseous anesthesia and the periodontal ligament injection, intraseptal anesthesia remains a useful local anesthesia technique for general dentists. Intraseptal anesthesia can be employed with safety and efficacy as an alternative to conventional local infiltration or regional nerve block injections. It also can serve as an adjunctive technique when conventional techniques fail to achieve adequate local anesthesia. This article reviews the intraseptal anesthesia technique, including its indications and limitations.

Alternative Mating Tactics in Male Chameleons (Chamaeleo chamaeleon) Are Evident in Both Long-Term Body Color and Short-Term Courtship Pattern

PubMed Central

Keren-Rotem, Tammy; Levy, Noga; Wolf, Lior; Bouskila, Amos; Geffen, Eli

2016-01-01

Alternative mating tactics in males of various taxa are associated with body color, body size, and social status. Chameleons are known for their ability to change body color following immediate environmental or social stimuli. In this study, we examined whether the differential appearance of male common chameleon during the breeding season is indeed an expression of alternative mating tactics. We documented body color of males and used computer vision techniques to classify images of individuals into discrete color patterns associated with seasons, individual characteristics, and social contexts. Our findings revealed no differences in body color and color patterns among males during the non-breeding season. However, during the breeding season males appeared in several color displays, which reflected body size, social status, and behavioral patterns. Furthermore, smaller and younger males resembled the appearance of small females. Consequently, we suggest that long-term color change in males during the breeding season reflects male alternative mating tactics. Upon encounter with a receptive female, males rapidly alter their appearance to that of a specific brief courtship display, which reflects their social status. The females, however, copulated indiscriminately in respect to male color patterns. Thus, we suggest that the differential color patterns displayed by males during the breeding season are largely aimed at inter-male signaling. PMID:27409771

Androgenesis in Solanaceae.

PubMed

Seguí-Simarro, Jose M

2016-01-01

The Solanaceae is one of the most important families for global agriculture. Among the different solanaceous species, tobacco (Nicotiana tabacum), potato (Solanum tuberosum), tomato (Solanum lycopersicum), eggplant (Solanum melongena), and pepper (Capsicum annuum) are five crops of outstanding importance worldwide. In these crops, maximum yields are produced by hybrid plants created by crossing pure (homozygous) lines with the desired traits. Pure lines may be produced by conventional breeding methods, which is time consuming and costly. Alternatively, it is possible to accelerate the production of pure lines by creating doubled haploid (DH) plants derived from (haploid) male gametophytes or their precursors (androgenesis). In this way, the different steps for the production of pure lines can be reduced to only one generation, which implies important time and cost savings. This and other advantages make androgenic DHs the choice in a number of important crops where any of the different experimental in vitro techniques (anther culture or isolated microspore culture) is well set up. The Solanaceae family is an excellent example of heterogeneity in terms of response to these techniques, including highly responding species such as tobacco, considered a model system, and tomato, one of the most recalcitrant species, where no reliable and reproducible methods are yet available. Interestingly, the first evidence of androgenesis, particularly through in vitro anther culture, was demonstrated in a solanaceous species, Datura innoxia. In this chapter, we report the state of the art of the research about androgenic DHs in Solanaceae, paying special attention to datura, tobacco, potato, tomato, eggplant, and pepper.

Side effects and complications of intraosseous anesthesia and conventional oral anesthesia

PubMed Central

Peñarrocha-Oltra, David; Ata-Ali, Javier; Oltra-Moscardó, María J.; Peñarrocha, Miguel

2012-01-01

Objective: To analyze the side effects and complications following intraosseous anesthesia (IA), comparing them with those of the conventional oral anesthesia techniques. Material and method: A simple-blind, prospective clinical study was carried out. Each patient underwent two anesthetic techniques: conventional (local infiltration and locoregional anesthetic block) and intraosseous, for respective dental operations. In order to allow comparison of IA versus conventional anesthesia, the two operations were similar and affected the same two teeth in opposite quadrants. Heart rate was recorded in all cases before injection of the anesthetic solution and again 30 seconds after injection. The complications observed after anesthetic administration were recorded. Results: A total of 200 oral anesthetic procedures were carried out in 100 patients. Both IA and conventional anesthesia resulted in a significant increase in heart rate, though the increase was greater with the latter technique. Incidents were infrequent with either anesthetic technique, with no significant differences between them. Regarding the complications, there were significant differences in pain at the injection site, with more intense pain in the case of IA (x2=3.532, p=0.030, Φ2=0.02), while the limitation of oral aperture was more pronounced with conventional anesthesia (x2=5.128, p<0.05, Φ2=0.014). Post-anesthetic biting showed no significant differences (x2=4.082, p=0.121, Φ2=0.009). Conclusions: Both anesthetic techniques significantly increased heart rate, and IA caused comparatively more pain at the injection site, while limited oral aperture was more frequent with conventional anesthesia. Post-anesthetic biting showed no significant differences between the two techniques. Key words:Intraosseous anesthesia, oral anesthesia, mandibular block, heart rate, adrenalin, complications. PMID:22143716

Selective sweep at the Rpv3 locus during grapevine breeding for downy mildew resistance.

PubMed

Di Gaspero, Gabriele; Copetti, Dario; Coleman, Courtney; Castellarin, Simone Diego; Eibach, Rudolf; Kozma, Pál; Lacombe, Thierry; Gambetta, Gregory; Zvyagin, Andrey; Cindrić, Petar; Kovács, László; Morgante, Michele; Testolin, Raffaele

2012-02-01

The Rpv3 locus is a major determinant of downy mildew resistance in grapevine (Vitis spp.). A selective sweep at this locus was revealed by the DNA genotyping of 580 grapevines, which include a highly diverse set of 265 European varieties that predated the spread of North American mildews, 82 accessions of wild species, and 233 registered breeding lines with North American ancestry produced in the past 150 years. Artificial hybridisation and subsequent phenotypic selection favoured a few Rpv3 haplotypes that were introgressed from wild vines and retained in released varieties. Seven conserved haplotypes in five descent groups of resistant varieties were traced back to their founders: (1) 'Munson', a cross between two of Hermann Jaeger's selections of V. rupestris and V. lincecumii made in the early 1880s in Missouri, (2) V. rupestris 'Ganzin', first utilised for breeding in 1879 by Victor Ganzin in France, (3) 'Noah', selected in 1869 from intermingled accessions of V. riparia and V. labrusca by Otto Wasserzieher in Illinois, (4) 'Bayard', a V. rupestris × V. labrusca offspring generated in 1882 by George Couderc in France, and (5) a wild form closely related to V. rupestris accessions in the Midwestern United States and introgressed into 'Seibel 4614' in the 1880s by Albert Seibel in France. Persistence of these Rpv3 haplotypes across many of the varieties generated by human intervention indicates that a handful of vines with prominent resistance have laid the foundation for modern grape breeding. A rampant hot spot of NB-LRR genes at the Rpv3 locus has provided a distinctive advantage for the adaptation of native North American grapevines to withstand downy mildew. The coexistence of multiple resistance alleles or paralogues in the same chromosomal region but in different haplotypes counteracts efforts to pyramidise them in a diploid individual via conventional breeding.

Estimation of sheep and pig body composition by x-ray CT, MRI, and ultrasound imaging

NASA Astrophysics Data System (ADS)

Glasbey, Chris A.

1993-07-01

Non-invasive imaging techniques have revolutionized diagnostic medicine, and promise to do likewise in animal experimentation and breeding. In this paper, three applications are described in which the objective is to predict body composition.

The Sine Method: An Alternative Height Measurement Technique

Treesearch

Don C. Bragg; Lee E. Frelich; Robert T. Leverett; Will Blozan; Dale J. Luthringer

2011-01-01

Height is one of the most important dimensions of trees, but few observers are fully aware of the consequences of the misapplication of conventional height measurement techniques. A new approach, the sine method, can improve height measurement by being less sensitive to the requirements of conventional techniques (similar triangles and the tangent method). We studied...

Hot-wire anemometry in hypersonic helium flow

NASA Technical Reports Server (NTRS)

Wagner, R. D.; Weinstein, L. M.

1974-01-01

Hot-wire anemometry techniques are described that have been developed and used for hypersonic-helium-flow studies. The short run time available dictated certain innovations in applying conventional hot-wire techniques. Some examples are given to show the application of the techniques used. Modifications to conventional equipment are described, including probe modifications and probe heating controls.

Comparison of surgically induced astigmatism in patients with horizontal rectus muscle recession

PubMed Central

Çakmak, Harun; Kocatürk, Tolga; Dündar, Sema Oruç

2014-01-01

AIM To compare surgically induced astigmatism (SIA) following horizontal rectus muscle recession surgery between suspension recession with both the “hang-back” technique and conventional recession technique. METHODS Totally, 48 eyes of 24 patients who had undergone horizontal rectus muscle recession surgery were reviewed retrospectively. The patients were divided into two groups. Twelve patients were operated on by the hang-back technique (Group 1), and 12 by the conventional recession technique (Group 2). SIA was calculated on the 1st wk, 1st and in the 3rd mo after surgery using the SIA calculator. RESULTS SIA was statistically higher in the Group 1 all postoperative follow-up. SIA was the highest in the 1st wk, and decreased gradually in both groups. CONCLUSION The suspension recession technique induced much more SIA than the conventional recession technique. This difference also continued in the following visits. Therefore, the refractive power should be checked postoperatively in order to avoid refractive amblyopia. Conventional recession surgery should be the preferred method so as to minimize the postoperative refractive changes in patients with amblyopia. PMID:25161948

Comparison of computer-assisted surgery with conventional technique for the treatment of axial distal phalanx fractures in horses: an in vitro study.

PubMed

Andritzky, Juliane; Rossol, Melanie; Lischer, Christoph; Auer, Joerg A

2005-01-01

To compare the precision obtained with computer-assisted screw insertion for treatment of mid-sagittal articular fractures of the distal phalanx (P3) with results achieved with a conventional technique. In vitro experimental study. Thirty-two cadaveric equine limbs. Four groups of 8 limbs were studied. Either 1 or 2 screws were inserted perpendicular to an imaginary axial fracture of P3 using computer-assisted surgery (CAS) or conventional technique. Screw insertion time, predetermined screw length, inserted screw length, fit of the screw, and errors in placement were recorded. CAS technique took 15-20 minutes longer but resulted in greater precision of screw length and placement compared with the conventional technique. Improved precision in screw insertion with CAS makes insertion of 2 screws possible for repair of mid-sagittal P3 fractures. CAS although expensive improves precision in screw insertion into P3 and consequently should yield improved clinical outcome.

Demonstration of a single-wavelength spectral-imaging-based Thai jasmine rice identification

NASA Astrophysics Data System (ADS)

Suwansukho, Kajpanya; Sumriddetchkajorn, Sarun; Buranasiri, Prathan

2011-07-01

A single-wavelength spectral-imaging-based Thai jasmine rice breed identification is demonstrated. Our nondestructive identification approach relies on a combination of fluorescent imaging and simple image processing techniques. Especially, we apply simple image thresholding, blob filtering, and image subtracting processes to either a 545 or a 575nm image in order to identify our desired Thai jasmine rice breed from others. Other key advantages include no waste product and fast identification time. In our demonstration, UVC light is used as our exciting light, a liquid crystal tunable optical filter is used as our wavelength seclector, and a digital camera with 640activepixels×480activepixels is used to capture the desired spectral image. Eight Thai rice breeds having similar size and shape are tested. Our experimental proof of concept shows that by suitably applying image thresholding, blob filtering, and image subtracting processes to the selected fluorescent image, the Thai jasmine rice breed can be identified with measured false acceptance rates of <22.9% and <25.7% for spectral images at 545 and 575nm wavelengths, respectively. A measured fast identification time is 25ms, showing high potential for real-time applications.

Next-Generation Sequencing Approaches in Genome-Wide Discovery of Single Nucleotide Polymorphism Markers Associated with Pungency and Disease Resistance in Pepper.

PubMed

Manivannan, Abinaya; Kim, Jin-Hee; Yang, Eun-Young; Ahn, Yul-Kyun; Lee, Eun-Su; Choi, Sena; Kim, Do-Sun

2018-01-01

Pepper is an economically important horticultural plant that has been widely used for its pungency and spicy taste in worldwide cuisines. Therefore, the domestication of pepper has been carried out since antiquity. Owing to meet the growing demand for pepper with high quality, organoleptic property, nutraceutical contents, and disease tolerance, genomics assisted breeding techniques can be incorporated to develop novel pepper varieties with desired traits. The application of next-generation sequencing (NGS) approaches has reformed the plant breeding technology especially in the area of molecular marker assisted breeding. The availability of genomic information aids in the deeper understanding of several molecular mechanisms behind the vital physiological processes. In addition, the NGS methods facilitate the genome-wide discovery of DNA based markers linked to key genes involved in important biological phenomenon. Among the molecular markers, single nucleotide polymorphism (SNP) indulges various benefits in comparison with other existing DNA based markers. The present review concentrates on the impact of NGS approaches in the discovery of useful SNP markers associated with pungency and disease resistance in pepper. The information provided in the current endeavor can be utilized for the betterment of pepper breeding in future.

Managing cows: an ethnography of breeding practices and uses of reproductive technology in contemporary dairy farming in Lombardy (Italy).

PubMed

Grasseni, Cristina

2007-06-01

The aim of this article is to contribute detailed ethnographic material to broaden the scope of what we mean by reproductive technology. Technology can be defined not only by a series of laboratory techniques (such as artificial insemination and embryo transfer) that are drafted into the daily management of the animal body, but also by a range of on-farm management strategies and working routines, as well as the cultural dispositions, social networks and tacit knowledge of the actors involved. RT is communicated to lay operators and disseminated amongst semi-professional figures such as breed experts, herd inspectors and technical consultants. The practical contexts in which reproductive knowledge is popularized and applied provide ample scope for local negotiations, resistance and conflict. Professional knowledge about breed-improvement is personalised and appropriated by operators and plays a role in power relations and the exercise of personal charisma as well as being specific to context, in particular the nuances of pre-existing relationships of trust, friendship, kinship or hierarchy. No wonder then that many ambivalences and compromises coexist in the practice of applying 'reproductive knowledge' to breed selection.

Gastropexy for prevention of gastric dilatation-volvulus in dogs: history and techniques.

PubMed

Allen, Philip; Paul, April

2014-09-01

Gastric dilatation-volvulus (GDV) is a common and catastrophic disease of large and giant-breed dogs. Treatment of GDV includes medical stabilization followed by prompt surgical repositioning of the stomach in its normal anatomic position. To prevent reoccurrence, gastropexy is used to securely adhere the stomach to the body wall. Effective gastropexy decreases the recurrence of GDV from as high as 80% to less than 5%. The purpose of this article is to describe the history, indications, and techniques for gastropexy. Gastropexy was first reported in veterinary medicine in 1971 for the management of gastric reflux, and later in 1979 for treating and preventing the recurrence of GDV. Gastropexy is indicated in all dogs that undergo surgical correction of GDV. Additionally, prophylactic gastropexy should be strongly considered at the time of surgery in dogs undergoing splenectomy for splenic torsion and potentially other splenic pathology, and in dogs of at-risk breeds, such as Great Danes, that are undergoing exploratory celiotomy for any reason owing to evidence for increased risk of GDV in these patients. Although there are numerous techniques described, gastropexy is always performed on the right side of the abdomen, near the last rib. Ensuring an anatomically correct gastropexy location is vital to prevent postoperative complications such as partial pyloric outflow obstruction. Gastropexy can be performed as part of an open surgical approach to the abdomen or using a minimally invasive technique. When combined with surgical correction of GDV, gastropexy is almost always performed as an open procedure. The stomach is repositioned, the abdomen explored, and then a permanent gastropexy is performed. Techniques used for open gastropexy include incisional, belt-loop, circumcostal, and incorporating gastropexy, as well as gastrocolopexy. Each of these has been described later. Incisional gastropexy is currently the most commonly performed method of surgical gastropexy in dogs; it is quick, relatively easy, safe, and effective. Minimally invasive techniques for gastropexy are often used when gastropexy is performed as an elective, isolated procedure. Minimally invasive techniques include the grid approach, endoscopically guided miniapproach, and laparoscopic gastropexy. Laparoscopic gastropexy is the least invasive alternative; however, it requires special equipment and significant surgical expertise to perform. The authors consider it a veterinarian's responsibility to educate the owners of at-risk large and giant dog breeds about prophylactic gastropexy given such a favorable risk-benefit profile. Copyright © 2014 Elsevier Inc. All rights reserved.

Evaluating biological variation in non-transgenic crops: executive summary from the ILSI Health and Environmental Sciences Institute workshop, November 16-17, 2009, Paris, France.

PubMed

Doerrer, Nancy; Ladics, Gregory; McClain, Scott; Herouet-Guicheney, Corinne; Poulsen, Lars K; Privalle, Laura; Stagg, Nicola

2010-12-01

The International Life Sciences Institute Health and Environmental Sciences Institute Protein Allergenicity Technical Committee hosted an international workshop November 16-17, 2009, in Paris, France, with over 60 participants from academia, government, and industry to review and discuss the potential utility of "-omics" technologies for assessing the variability in plant gene, protein, and metabolite expression. The goal of the workshop was to illustrate how a plant's constituent makeup and phenotypic processes can be surveyed analytically. Presentations on the "-omics" techniques (i.e., genomics, proteomics, and metabolomics) highlighted the workshop, and summaries of these presentations are published separately in this supplemental issue. This paper summarizes key messages, as well as the consensus points reached, in a roundtable discussion on eight specific questions posed during the final session of the workshop. The workshop established some common, though not unique, challenges for all "-omics" techniques, and include (a) standardization of separation/extraction and analytical techniques; (b) difficulty in associating environmental impacts (e.g., planting, soil texture, location, climate, stress) with potential alterations in plants at genomic, proteomic, and metabolomic levels; (c) many independent analytical measurements, but few replicates/subjects--poorly defined accuracy and precision; and (d) bias--a lack of hypothesis-driven science. Information on natural plant variation is critical in establishing the utility of new technologies due to the variability in specific analytes that may result from genetic differences (crop genotype), different crop management practices (conventional high input, low input, organic), interaction between genotype and environment, and the use of different breeding methods. For example, variations of several classes of proteins were reported among different soybean, rice, or wheat varieties or varieties grown at different locations. Data on the variability of allergenic proteins are important in defining the risk of potential allergenicity. Once established as a standardized assay, survey approaches such as the "-omics" techniques can be considered in a hypothesis-driven analysis of plants, such as determining unintended effects in genetically modified (GM) crops. However, the analysis should include both the GM and control varieties that have the same breeding history and exposure to the same environmental conditions. Importantly, the biological relevance and safety significance of changes in "-omic" data are still unknown. Furthermore, the current compositional assessment for evaluating the substantial equivalence of GM crops is robust, comprehensive, and a good tool for food safety assessments. The overall consensus of the workshop participants was that many "-omics" techniques are extremely useful in the discovery and research phases of biotechnology, and are valuable for hypothesis generation. However, there are many methodological shortcomings identified with "-omics" approaches, a paucity of reference materials, and a lack of focused strategy for their use that currently make them not conducive for the safety assessment of GM crops. Copyright © 2010 Elsevier Inc. All rights reserved.

In silico comparison of the reproducibility of full-arch implant provisional restorations to final restoration between a 3D Scan/CAD/CAM technique and the conventional method.

PubMed

Mino, Takuya; Maekawa, Kenji; Ueda, Akihiro; Higuchi, Shizuo; Sejima, Junichi; Takeuchi, Tetsuo; Hara, Emilio Satoshi; Kimura-Ono, Aya; Sonoyama, Wataru; Kuboki, Takuo

2015-04-01

The aim of this article was to investigate the accuracy in the reproducibility of full-arch implant provisional restorations to final restorations between a 3D Scan/CAD/CAM technique and the conventional method. We fabricated two final restorations for rehabilitation of maxillary and mandibular complete edentulous area and performed a computer-based comparative analysis of the accuracy in the reproducibility of the provisional restoration to final restoration between a 3D scanning and CAD/CAM (Scan/CAD/CAM) technique and the conventional silicone-mold transfer technique. Final restorations fabricated either by the conventional or Scan/CAD/CAM method were successfully installed in the patient. The total concave/convex volume discrepancy observed with the Scan/CAD/CAM technique was 503.50mm(3) and 338.15 mm(3) for maxillary and mandibular implant-supported prostheses (ISPs), respectively. On the other hand, total concave/convex volume discrepancy observed with the conventional method was markedly high (1106.84 mm(3) and 771.23 mm(3) for maxillary and mandibular ISPs, respectively). The results of the present report suggest that Scan/CAD/CAM method enables a more precise and accurate transfer of provisional restorations to final restorations compared to the conventional method. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

A single-gradient junction technique to replace multiple-junction shifts for craniospinal irradiation treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadley, Austin; Ding, George X., E-mail: george.ding@vanderbilt.edu

2014-01-01

Craniospinal irradiation (CSI) requires abutting fields at the cervical spine. Junction shifts are conventionally used to prevent setup error–induced overdosage/underdosage from occurring at the same location. This study compared the dosimetric differences at the cranial-spinal junction between a single-gradient junction technique and conventional multiple-junction shifts and evaluated the effect of setup errors on the dose distributions between both techniques for a treatment course and single fraction. Conventionally, 2 lateral brain fields and a posterior spine field(s) are used for CSI with weekly 1-cm junction shifts. We retrospectively replanned 4 CSI patients using a single-gradient junction between the lateral brain fieldsmore » and the posterior spine field. The fields were extended to allow a minimum 3-cm field overlap. The dose gradient at the junction was achieved using dose painting and intensity-modulated radiation therapy planning. The effect of positioning setup errors on the dose distributions for both techniques was simulated by applying shifts of ± 3 and 5 mm. The resulting cervical spine doses across the field junction for both techniques were calculated and compared. Dose profiles were obtained for both a single fraction and entire treatment course to include the effects of the conventional weekly junction shifts. Compared with the conventional technique, the gradient-dose technique resulted in higher dose uniformity and conformity to the target volumes, lower organ at risk (OAR) mean and maximum doses, and diminished hot spots from systematic positioning errors over the course of treatment. Single-fraction hot and cold spots were improved for the gradient-dose technique. The single-gradient junction technique provides improved conformity, dose uniformity, diminished hot spots, lower OAR mean and maximum dose, and one plan for the entire treatment course, which reduces the potential human error associated with conventional 4-shifted plans.« less

Comparison of Para-Selles Bailenger/Kop-Color Fumouze, Para-Selles-Iodésine/Kop-Color II Fumouze diagnostic kits with conventional microscopic methods in identifying intestinal parasitic diseases in Senegal.

PubMed

Sow, Doudou; Dieng, Yémou; Haouchine, Djamal; Niang, Khadim; Niang, Thiane; Sylla, Khadime; Tine, Roger Clément; Ndiaye, Magatte; Ndiaye, Jean Louis; Faye, Babacar; Faye, Omar; Gaye, Oumar; Dieng, Thérèse; Izri, Arezki

2017-09-01

In the context of controlling intestinal parasites, accurate diagnosis is essential. Our objective was to evaluate the performance of new diagnostic kits compared to conventional microscopic methods in identifying intestinal parasites. Faeces collected in rural area in Senegal were subjected to several detection techniques. Thus, the sensitivity, specificity, positive and negative predictive values of new diagnostic techniques were compared to conventional merthiolate-iodine-formalin, conventional Bailenger and modified Ritchie. Furthermore, the kappa coefficient was calculated to evaluate the correlation between the new kit and those of modified Ritchie. Out of the 117 patients examined, 102 presented with a parasite, or prevalence of 87.1%. The Fumouze techniques proved to be as effective as the conventional methods in detecting flagellates and helminths with sensitivities ranging from 97 to 100%. However, conventional techniques were slightly more sensitive in identifying Endolimax nana and Blastocystis hominis . The correlation was nearly perfect (k = 0.83 and 1), respectively between Bailenger Fumouze, Iodesine Fumouze and modified Ritchie in identifying helminths while it was just acceptable (k = 0.27 and 0.28) in identifying B. hominis . The modified Ritchie technique routinely used in our laboratory remains a good diagnostic tool. However, the use of kit techniques was interesting when reading the pellet after concentration and the Colour KOP staining was a considerable contribution to the diagnosis of the vegetative forms. Therefore, it would be interesting to determine the cost of a stool test using Fumouze kit techniques to provide the most cost effective way.

Comparing the Efficiency of Two Different Extraction Techniques in Removal of Maxillary Third Molars: A Randomized Controlled Trial.

PubMed

Edward, Joseph; Aziz, Mubarak A; Madhu Usha, Arjun; Narayanan, Jyothi K

2017-12-01

Extractions are routine procedures in dental surgery. Traditional extraction techniques use a combination of severing the periodontal attachment, luxation with an elevator, and removal with forceps. A new technique of extraction of maxillary third molar is introduced in this study-Joedds technique, which is compared with the conventional technique. One hundred people were included in the study, the people were divided into two groups by means of simple random sampling. In one group conventional technique of maxillary third molar extraction was used and on second Joedds technique was used. Statistical analysis was carried out with student's t test. Analysis of 100 patients based on parameters showed that the novel joedds technique had minimal trauma to surrounding tissues, less tuberosity and root fractures and the time taken for extraction was <2 min while compared to other group of patients. This novel technique has proved to be better than conventional third molar extraction technique, with minimal complications. If Proper selection of cases and right technique are used.

Single-incision Laparoscopic Surgery (SILS) in general surgery: a review of current practice.

PubMed

Froghi, Farid; Sodergren, Mikael Hans; Darzi, Ara; Paraskeva, Paraskevas

2010-08-01

Single-incision laparoscopic surgery (SILS) aims to eliminate multiple port incisions. Although general operative principles of SILS are similar to conventional laparoscopic surgery, operative techniques are not standardized. This review aims to evaluate the current use of SILS published in the literature by examining the types of operations performed, techniques employed, and relevant complications and morbidity. This review considered a total of 94 studies reporting 1889 patients evaluating 17 different general surgical operations. There were 8 different access techniques reported using conventional laparoscopic instruments and specifically designed SILS ports. There is extensive heterogeneity associated with operating methods and in particular ways of overcoming problems with retraction and instrumentation. Published complications, morbidity, and hospital length of stay are comparable to conventional laparoscopy. Although SILS provides excellent cosmetic results and morbidity seems similar to conventional laparoscopy, larger randomized controlled trials are needed to assess the safety and efficacy of this novel technique.

Evolution of risk assessment strategies for food and feed uses of stacked GM events.

PubMed

Kramer, Catherine; Brune, Phil; McDonald, Justin; Nesbitt, Monique; Sauve, Alaina; Storck-Weyhermueller, Sabine

2016-09-01

Data requirements are not harmonized globally for the regulation of food and feed derived from stacked genetically modified (GM) events, produced by combining individual GM events through conventional breeding. The data required by some regulatory agencies have increased despite the absence of substantiated adverse effects to animals or humans from the consumption of GM crops. Data from studies conducted over a 15-year period for several stacked GM event maize (Zea mays L.) products (Bt11 ×  GA21, Bt11 ×  MIR604, MIR604 ×  GA21, Bt11 ×  MIR604 ×  GA21, Bt11 ×  MIR162 ×  GA21 and Bt11 ×  MIR604 ×  MIR162 ×  GA21), together with their component single events, are presented. These data provide evidence that no substantial changes in composition, protein expression or insert stability have occurred after combining the single events through conventional breeding. An alternative food and feed risk assessment strategy for stacked GM events is suggested based on a problem formulation approach that utilizes (i) the outcome of the single event risk assessments, and (ii) the potential for interactions in the stack, based on an understanding of the mode of action of the transgenes and their products. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Laser cleaning of steel for paint removal

NASA Astrophysics Data System (ADS)

Chen, G. X.; Kwee, T. J.; Tan, K. P.; Choo, Y. S.; Hong, M. H.

2010-11-01

Paint removal is an important part of steel processing for marine and offshore engineering. For centuries, a blasting techniques have been widely used for this surface preparation purpose. But conventional blasting always has intrinsic problems, such as noise, explosion risk, contaminant particles, vibration, and dust. In addition, processing wastes often cause environmental problems. In recent years, laser cleaning has attracted much research effort for its significant advantages, such as precise treatment, and high selectivity and flexibility in comparison with conventional cleaning techniques. In the present study, we use this environmentally friendly technique to overcome the problems of conventional blasting. Processed samples are examined with optical microscopes and other surface characterization tools. Experimental results show that laser cleaning can be a good alternative candidate to conventional blasting.

Strain gage measurement errors in the transient heating of structural components

NASA Technical Reports Server (NTRS)

Richards, W. Lance

1993-01-01

Significant strain-gage errors may exist in measurements acquired in transient thermal environments if conventional correction methods are applied. Conventional correction theory was modified and a new experimental method was developed to correct indicated strain data for errors created in radiant heating environments ranging from 0.6 C/sec (1 F/sec) to over 56 C/sec (100 F/sec). In some cases the new and conventional methods differed by as much as 30 percent. Experimental and analytical results were compared to demonstrate the new technique. For heating conditions greater than 6 C/sec (10 F/sec), the indicated strain data corrected with the developed technique compared much better to analysis than the same data corrected with the conventional technique.

Whole genome sequences in pulse crops: a global community resource to expedite translational genomics and knowledge-based crop improvement.

PubMed

Bohra, Abhishek; Singh, Narendra P

2015-08-01

Unprecedented developments in legume genomics over the last decade have resulted in the acquisition of a wide range of modern genomic resources to underpin genetic improvement of grain legumes. The genome enabled insights direct investigators in various ways that primarily include unearthing novel structural variations, retrieving the lost genetic diversity, introducing novel/exotic alleles from wider gene pools, finely resolving the complex quantitative traits and so forth. To this end, ready availability of cost-efficient and high-density genotyping assays allows genome wide prediction to be increasingly recognized as the key selection criterion in crop breeding. Further, the high-dimensional measurements of agronomically significant phenotypes obtained by using new-generation screening techniques will empower reference based resequencing as well as allele mining and trait mapping methods to comprehensively associate genome diversity with the phenome scale variation. Besides stimulating the forward genetic systems, accessibility to precisely delineated genomic segments reveals novel candidates for reverse genetic techniques like targeted genome editing. The shifting paradigm in plant genomics in turn necessitates optimization of crop breeding strategies to enable the most efficient integration of advanced omics knowledge and tools. We anticipate that the crop improvement schemes will be bolstered remarkably with rational deployment of these genome-guided approaches, ultimately resulting in expanded plant breeding capacities and improved crop performance.

Improving wheat to remove coeliac epitopes but retain functionality

PubMed Central

Shewry, Peter R.; Tatham, Arthur S.

2016-01-01

Coeliac disease is an intolerance triggered by the ingestion of wheat gluten proteins. It is of increasing concern to consumers and health professionals as its incidence appears to be increasing. The amino acid sequences in gluten proteins that are responsible for triggering responses in sensitive individuals have been identified showing that they vary in distribution among and between different groups of gluten proteins. Conventional breeding may therefore be used to select for gluten protein fractions with lower contents of coeliac epitopes. Molecular breeding approaches can also be used to specifically down-regulate coeliac-toxic proteins or mutate coeliac epitopes within individual proteins. A combination of these approaches may therefore be used to develop a “coeliac-safe” wheat. However, this remains a formidable challenge due to the complex multigenic control of gluten protein composition. Furthermore, any modified wheats must retain acceptable properties for making bread and other processed foods. Not surprisingly, such coeliac-safe wheats have not yet been developed despite over a decade of research. PMID:26937068

Molecular, Genetic and Agronomic Approaches to Utilizing Pulses as Cover Crops and Green Manure into Cropping Systems

PubMed Central

Tani, Eleni; Abraham, Eleni; Chachalis, Demosthenis; Travlos, Ilias

2017-01-01

Cover crops constitute one of the most promising agronomic practices towards a more sustainable agriculture. Their beneficial effects on main crops, soil and environment are many and various, while risks and disadvantages may also appear. Several legumes show a high potential but further research is required in order to suggest the optimal legume cover crops for each case in terms of their productivity and ability to suppress weeds. The additional cost associated with cover crops should also be addressed and in this context the use of grain legumes such as cowpea, faba bean and pea could be of high interest. Some of the aspects of these grain legumes as far as their use as cover crops, their genetic diversity and their breeding using conventional and molecular approaches are discussed in the present review. The specific species seem to have a high potential for use as cover crops, especially if their noticeable genetic diversity is exploited and their breeding focuses on several desirable traits. PMID:28587254

Genetic dissimilarity of putative gamma-ray-induced 'Preciosa-AAAB-Pome type' banana (Musa sp) mutants based on multivariate statistical analysis.

PubMed

Pestana, R K N; Amorim, E P; Ferreira, C F; Amorim, V B O; Oliveira, L S; Ledo, C A S; Silva, S O

2011-10-25

Bananas are among the most important fruit crops worldwide, being cultivated in more than 120 countries, mainly by small-scale producers. However, short-stature high-yielding bananas presenting good agronomic characteristics are hard to find. Consequently, wind continues to damage a great number of plantations each year, leading to lodging of plants and bunch loss. Development of new cultivars through conventional genetic breeding methods is hindered by female sterility and the low number of seeds. Mutation induction seems to have great potential for the development of new cultivars. We evaluated genetic dissimilarity among putative 'Preciosa' banana mutants generated by gamma-ray irradiation, using morphoagronomic characteristics and ISSR markers. The genetic distances between the putative 'Preciosa' mutants varied from 0.21 to 0.66, with a cophenetic correlation coefficient of 0.8064. We found good variability after irradiation of 'Preciosa' bananas; this procedure could be useful for banana breeding programs aimed at developing short-stature varieties with good agronomic characteristics.

Patent ductus arteriosus in a family of Chihuahuas.

PubMed

Bomassi, E; Libermann, S; Bille, C; Rattez, E

2011-04-01

This report describes a patent ductus arteriosus (PDA) in four puppies from the same family of Chihuahuas, bred from the same mother and from two different litters. Identification of this congenital anomaly relies on clinical examination, radiography and ultrasonography. Three of these puppies were female, and had a type-1 PDA. A conventional surgical ligation was performed on one of them, whilst the others underwent no treatment. One puppy was male, and presented with a type-4 PDA, requiring euthanasia. Post-mortem examination and histopathological examination of the PDA allowed characterisation of the histological anomalies, which were identical to those described in other breeds. The mother and the two stud dogs were not affected. Even though the mode of transmission has not been fully identified, it is evident that this PDA is hereditary in nature. To the authors' knowledge this is the first description of this congenital cardiopathy in a family of this breed, and in a significant number of first-generation individuals. © 2011 British Small Animal Veterinary Association.

Precise, flexible and affordable gene stacking for crop improvement.

PubMed

Chen, Weiqiang; Ow, David W

2017-09-03

The genetic engineering of plants offers a revolutionary advance for crop improvement, and the incorporation of transgenes into crop species can impart new traits that would otherwise be difficult to obtain through conventional breeding. Transgenes introduced into plants, however, can only be useful when bred out to field cultivars. As new traits are continually added to further improve transgenic cultivars, clustering new DNA near previously introduced transgenes keep from inflating the number of segregating units that breeders must assemble back into a breeding line. Here we discuss various options to introduce DNA site-specifically into an existing transgenic locus. As food security is becoming a pressing global issue, the old proverb resonates true to this day: "give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime." Hence, we describe a recombinase-mediate gene stacking system designed with freedom to operate, providing an affordable option for crop improvement by less developed countries where food security is most at risk.

Freezing, thawing and aging effects on beef tenderness from Bos indicus and Bos taurus cattle.

PubMed

Aroeira, Carolina N; Torres Filho, Robledo A; Fontes, Paulo Rogério; Gomide, Lúcio Alberto M; Ramos, Alcinéia L S; Ladeira, Márcio M; Ramos, Eduardo M

2016-06-01

The objective of this study was to determine the effects of freezing prior to aging on the meat tenderness of young Nellore and Aberdeen Angus bulls. Samples of the longissimus thoracis muscle were submitted to two treatments: conventional aging and freezing (-20°C for 40 days) followed by thawing and aging periods. The meats were evaluated after 0, 7, 14 and 21 aging days (1°C). Freezing increased (P<0.05) purge, cooking loss and total exudate loss throughout aging. Nellore meats had greater total exudate loss and shorter sarcomere lengths (P<0.05). Freezing increased proteolysis during aging in the meats of both breeds, but reduced shear force was found (P<0.05) only in Aberdeen Angus meats and only at time zero. These results suggest that the meat tenderizing process by freezing prior to aging may contribute to meat tenderness in the first weeks of aging, but it is dependent on the animal breed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Feasibility of ballistic strengthening exercises in neurologic rehabilitation.

PubMed

Williams, Gavin; Clark, Ross A; Hansson, Jessica; Paterson, Kade

2014-09-01

Conventional methods for strength training in neurologic rehabilitation are not task specific for walking. Ballistic strength training was developed to improve the functional transfer of strength training; however, no research has investigated this in neurologic populations. The aim of this pilot study was to evaluate the feasibility of applying ballistic principles to conventional leg strengthening exercises in individuals with mobility limitations as a result of neurologic injuries. Eleven individuals with neurologic injuries completed seated and reclined leg press using conventional and ballistic techniques. A 2 × 2 repeated-measures analysis of variance was used to compare power measures (peak movement height and peak velocity) between exercises and conditions. Peak jump velocity and peak jump height were greater when using the ballistic jump technique rather than the conventional concentric technique (P < 0.01). These findings suggest that when compared with conventional strengthening exercises, the incorporation of ballistic principles was associated with increased peak height and peak velocities.

Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.

PubMed

Windolf, Markus; Schroeder, Josh; Fliri, Ladina; Dicht, Benno; Liebergall, Meir; Richards, R Geoff

2012-01-25

The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure. The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required.Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (p < 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (p = 0.001). Operating time per screw (from first shot to screw tightened) was on average 22% reduced by guided freehand (p = 0.018). In an experimental setting, the newly developed guided freehand technique for distal interlocking has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method utilizes established clinical workflows and does not require cost intensive add-on devices or extensive training. The underlying principle carries potential to assist implant positioning in numerous other applications within orthopedics and trauma from screw insertions to placement of plates, nails or prostheses.

Comparison of specimen adequacy and smear quality in oral smears prepared by manual liquid-based cytology and conventional methods

PubMed Central

Shukla, Surabhi; Einstein, A; Shukla, Abhilasha; Mishra, Deepika

2015-01-01

Background: Liquid-based cytology (LBC), recommended in the mass screening of potentially malignant cervical and oral lesions, suffers from high cost owing to the use of expensive automated devices and materials. Considering the need for cost-effective LBC techniques, we evaluated the efficacy of an inexpensive manual LBC (MLBC) technique against conventional cytological technique in terms of specimen adequacy and smear quality of oral smears. Materials and Methods: Cytological samples were collected from 21 patients using a cytobrush device. After preparation of a conventional smear, the brush containing the remaining sample was immersed in the preservative vial. The preserved material was processed by an MLBC technique and subsequently, direct smears were made from the prepared cell button. Both conventional and MLBC smears were stained by routine Papanicolaou technique and evaluated by an independent observer for the thickness of the smear, cellular distribution, resolution/clarity of cells, cellular staining characteristics and the presence of unsatisfactory background/artifacts. Each parameter was graded as satisfactory; or satisfactory, but limited; or unsatisfactory. Chi-square test was used to compare the values obtained (significance set at P ≤ 0.05). Results: MLBC technique produced a significant number of satisfactory smears with regard to cell distribution, clarity/resolution, staining characteristics and background/artifacts compared to conventional methods. Conclusions: MLBC is a cost-effective cytological technique that may produce oral smears with excellent cytomorphology and longer storage life. PMID:26980958

Manufacturing implant supported auricular prostheses by rapid prototyping techniques.

PubMed

Karatas, Meltem Ozdemir; Cifter, Ebru Demet; Ozenen, Didem Ozdemir; Balik, Ali; Tuncer, Erman Bulent

2011-08-01

Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadvantages of conventional methods. Rapid prototyping technique has the potential to simplify the procedure and decrease the laboratory work required. It eliminates the need for measurement impression procedures and preparation of wax model to be performed by prosthodontists themselves In the near future this technology will become a standard for fabricating maxillofacial prostheses.

Comparison of Kato-Katz, ethyl-acetate sedimentation, and Midi Parasep® in the diagnosis of hookworm, Ascaris and Trichuris infections in the context of an evaluation of rural sanitation in India.

PubMed

Funk, Anna L; Boisson, Sophie; Clasen, Thomas; Ensink, Jeroen H J

2013-06-01

The Kato-Katz, conventional ethyl-acetate sedimentation, and Midi Parasep(®) methods for diagnosing infection with soil-transmitted helminths were compared. The Kato-Katz technique gave the best overall diagnostic performance with the highest results in all measures (prevalence, faecal egg count, sensitivity) followed by the conventional ethyl-acetate and then the Midi Parasep(®) technique. The Kato-Katz technique showed a significantly higher faecal egg count and sensitivity for both hookworm and Trichuris as compared to the Midi Parasep(®) technique. The conventional ethyl-acetate technique produced smaller pellets and showed lower pellet mobility as compared to the Midi Parasep(®). Copyright © 2013 Elsevier B.V. All rights reserved.

Occlusal contact of fixed implant prostheses using functional bite impression technique.

PubMed

Suzuki, Yasunori; Shimpo, Hidemasa; Ohkubo, Chikahiro

2015-02-01

Functional bite impression (FBI) has been described as a definitive impression made under occlusal force after functional generated path (FGP) recording. This study compared the accuracy of occlusal contact of implant-fixed prostheses using the FBI technique and the conventional impression technique. Twelve subjects, each missing a single premolar or molar, were selected for this study. The conditions of the occlusal contacts were identified by the modified transillumination method. The occlusal contact condition was determined by comparing the rate of change in the occlusal contact area of the implant-fixed prostheses and both adjacent teeth before and after occlusal adjustment. The rate of change in the occlusal contact area using the FBI technique was 96%, and the rate using the conventional technique was 54%. The occlusal contact of implant prostheses using the FBI technique revealed better accuracy than that of the conventional technique. Regarding the FBI technique, a precise and functional prosthesis could be produced by completing the maxillomandibular registration, impression, and FGP at the same time.

Predicting cotton yield of small field plots in a cotton breeding program using UAV imagery data

NASA Astrophysics Data System (ADS)

Maja, Joe Mari J.; Campbell, Todd; Camargo Neto, Joao; Astillo, Philip

2016-05-01

One of the major criteria used for advancing experimental lines in a breeding program is yield performance. Obtaining yield performance data requires machine picking each plot with a cotton picker, modified to weigh individual plots. Harvesting thousands of small field plots requires a great deal of time and resources. The efficiency of cotton breeding could be increased significantly while the cost could be decreased with the availability of accurate methods to predict yield performance. This work is investigating the feasibility of using an image processing technique using a commercial off-the-shelf (COTS) camera mounted on a small Unmanned Aerial Vehicle (sUAV) to collect normal RGB images in predicting cotton yield on small plot. An orthonormal image was generated from multiple images and used to process multiple, segmented plots. A Gaussian blur was used to eliminate the high frequency component of the images, which corresponds to the cotton pixels, and used image subtraction technique to generate high frequency pixel images. The cotton pixels were then separated using k-means cluster with 5 classes. Based on the current work, the calculated percentage cotton area was computed using the generated high frequency image (cotton pixels) divided by the total area of the plot. Preliminary results showed (five flights, 3 altitudes) that cotton cover on multiple pre-selected 227 sq. m. plots produce an average of 8% which translate to approximately 22.3 kgs. of cotton. The yield prediction equation generated from the test site was then use on a separate validation site and produced a prediction error of less than 10%. In summary, the results indicate that a COTS camera with an appropriate image processing technique can produce results that are comparable to expensive sensors.

Recent advance in DNA-based traceability and authentication of livestock meat PDO and PGI products.

PubMed

Nicoloso, Letizia; Crepaldi, Paola; Mazza, Raffaele; Ajmone-Marsan, Paolo; Negrini, Riccardo

2013-04-01

This review updates the available molecular techniques and technologies and discusses how they can be used for traceability, food control and enforcement activities. The review also provides examples on how molecular techniques succeeded to trace back unknowns to their breeds of origin, to fingerprint single individuals and to generate evidence in court cases. The examples demonstrate the potential of the DNA based traceability techniques and explore possibilities for translating the next generation genomics tools into a food and feed control and enforcement framework.

Ultrathin Silicon Sheet in the Management of Unilateral Post-traumatic Temporo-Mandibuar Joint Ankylosis in Children: A Good Alternative to Conventional Techniques.

PubMed

Aggarwal, Sushil Kumar; Ankur, Bhatnagar; Jain, R K

2015-09-01

We have described a new technique of using ultra-thin silicon sheet (0.2 mm) between two transected bony ends for temporo-mandibular joint (TMJ) ankylosis in children with advantages of short operative time, minimal foreign material insertion and faster recovery time post-operatively which makes our technique a good alternative to conventional techniques. Our study is a non-randomized prospective study conducted on 10 children aged between 4 and 15 years who presented to our tertiary care institute with severe trismus after traumatic injury and were willing to undergo this new technique. The main outcome measure taken into consideration was difference between pre-operative, intra-operative (on table) and post-operative mouth opening (minimum 2 years follow-up). The pre-operative mouth opening in our cases varied from 1 to 5 mm. The intra-operative mouth opening achieved ranged from 2.8 to 3.2 cm. The mouth opening was about more than 2.7 cm in all our cases at 2 years of follow-up. Our technique is a good alternative to conventional techniques used for TMJ ankylosis in children but few more randomized controlled trials are required to assess its effectiveness in comparison to conventional techniques and for universal adoption of this technique.

Sexing adult black-legged kittiwakes by DNA, behavior, and morphology

USGS Publications Warehouse

Jodice, P.G.R.; Lanctot, Richard B.; Gill, V.A.; Roby, D.D.; Hatch, Shyla A.

2000-01-01

We sexed adult Black-legged Kittiwakes (Rissa tridactyla) using DNA-based genetic techniques, behavior and morphology and compared results from these techniques. Genetic and morphology data were collected on 605 breeding kittiwakes and sex-specific behaviors were recorded for a sub-sample of 285 of these individuals. We compared sex classification based on both genetic and behavioral techniques for this sub-sample to assess the accuracy of the genetic technique. DNA-based techniques correctly sexed 97.2% and sex-specific behaviors, 96.5% of this sub-sample. We used the corrected genetic classifications from this sub-sample and the genetic classifications for the remaining birds, under the assumption they were correct, to develop predictive morphometric discriminant function models for all 605 birds. These models accurately predicted the sex of 73-96% of individuals examined, depending on the sample of birds used and the characters included. The most accurate single measurement for determining sex was length of head plus bill, which correctly classified 88% of individuals tested. When both members of a pair were measured, classification levels improved and approached the accuracy of both behavioral observations and genetic analyses. Morphometric techniques were only slightly less accurate than genetic techniques but were easier to implement in the field and less costly. Behavioral observations, while highly accurate, required that birds be easily observable during the breeding season and that birds be identifiable. As such, sex-specific behaviors may best be applied as a confirmation of sex for previously marked birds. All three techniques thus have the potential to be highly accurate, and the selection of one or more will depend on the circumstances of any particular field study.

Military Nutrition Research: Eight Tasks to Address Medical Factors Limiting Soldier Effectiveness

DTIC Science & Technology

2005-10-01

a procedure and staging area; b) a new transgenic laboratory with seven adjacent animal rooms; c) seven additional animal rooms for other breeding ...Effect of Dietary Amino Acids on Spatial Memory in Rats Sleep deprived by the Flower -Pot Technique - Bradley Youngblood, David Elkins, Gennady Smagin...1997. 132. Youngblood BD, Zhou J, Smagin GN, Ryan DH, Harris RBS. Sleep deprivation by the " flower pot" technique and spatial reference memory

Transgenic Reproductive Cell Ablation.

PubMed

Lawit, Shai J; Chamberlin, Mark A

2017-01-01

Numerous cell ablation technologies are available and have been used in reproductive tissues, particularly for male tissues and cells. The importance of ablation of reproductive tissues is toward a fundamental understanding reproductive tissue development and fertilization, as well as, in developing sterility lines important to breeding strategies. Here, we describe techniques for developing ablation lines for both male and female reproductive cells. Also discussed are techniques for analysis, quality control, maintenance, and the lessening of pleiotropism in such lines.

Evaluation of capture techniques for long-billed curlews wintering in Texas

USGS Publications Warehouse

Woodin, Marc C.; Skoruppa, Mary K.; Edwardson, Jeremy W.; Austin, Jane E.

2012-01-01

Texas coast harbors the largest, eastern-most populations of Long-billed Curlews (Numenius americanus) in North America; however, very little is known about their migration and wintering ecology. Curlews are readily captured on their breeding grounds, but experience with capturing the species during the non-breeding season is extremely limited. We assessed the efficacy of 6 capture techniques for Long-billed Curlews in winter: 1) modified noose ropes, 2) remotely controlled bow net, 3) Coda Netgun, 4) Super Talon net gun, 5) Hawkseye whoosh net, and 6) cast net. The Coda Netgun had the highest rate of captures per unit of effort (CPUE = 0.31; 4 curlew captures/13 d of trapping effort), followed by bow net (CPUE = 0.17; 1 capture/6 d of effort), whoosh net (CPUE = 0.14; 1 capturel7 d of effort), and noose ropes (CPUE = 0.07; 1 capturel15 d of effort). No curlews were captured using the Super Talon net gun or a cast net (3 d and 1 d of effort, respectively). Multiple capture techniques should be readily available for maximum flexibility in matching capture methods with neophobic curlews that often unpredictably change referred feeding locations among extremely different habitat types.

Nest visits and capture events affect breeding success of Yellow-billed and Pacific loons

USGS Publications Warehouse

Uher-Koch, Brian D.; Schmutz, Joel A.; Wright, Kenneth G.

2015-01-01

Accurate estimates of breeding success are essential for understanding population dynamics and for managing populations. Unfortunately, research activities to collect these data can negatively impact the breeding success of the study species and bias estimates of breeding success. Despite the potential for negative impacts, few studies have documented the effect of capturing incubating adults on nest survival or compared nest survival following different capture methods. In this study we evaluate the impacts of investigator disturbance associated with captures and nest visits on nest survival of Yellow-billed Loons (Gavia adamsii) and Pacific Loons (Gavia pacifica) in the National Petroleum Reserve-Alaska (NPR-A), an area of conservation concern, in 2011–2013. In an effort to reduce capture-related nest failures, we developed a new suspended dive net technique to catch territorial aquatic birds while off their nests. We then compared nest survival following suspended dive net captures to bow-net trap captures of breeding adult loons. Daily nest survival following bow-net trap or suspended dive net capture was about 30% lower than when adults were not captured. The effect of captures on nest survival was similar between bow-net trap and suspended dive net capture methods. Nest visits without captures also negatively impacted nest survival, although less than captures. If not accounted for, nest visitation biased daily survival rates of nests downward 6%. Effects of investigator disturbance did not differ by species or between years. Our results suggest that any source of disturbance that displaces incubating adult loons could potentially reduce nest survival. To maximize breeding success, human disturbance factors should be limited near loon nests.

Genomic-based-breeding tools for tropical maize improvement.

PubMed

Chakradhar, Thammineni; Hindu, Vemuri; Reddy, Palakolanu Sudhakar

2017-12-01

Maize has traditionally been the main staple diet in the Southern Asia and Sub-Saharan Africa and widely grown by millions of resource poor small scale farmers. Approximately, 35.4 million hectares are sown to tropical maize, constituting around 59% of the developing worlds. Tropical maize encounters tremendous challenges besides poor agro-climatic situations with average yields recorded <3 tones/hectare that is far less than the average of developed countries. On the contrary to poor yields, the demand for maize as food, feed, and fuel is continuously increasing in these regions. Heterosis breeding introduced in early 90 s improved maize yields significantly, but genetic gains is still a mirage, particularly for crop growing under marginal environments. Application of molecular markers has accelerated the pace of maize breeding to some extent. The availability of array of sequencing and genotyping technologies offers unrivalled service to improve precision in maize-breeding programs through modern approaches such as genomic selection, genome-wide association studies, bulk segregant analysis-based sequencing approaches, etc. Superior alleles underlying complex traits can easily be identified and introgressed efficiently using these sequence-based approaches. Integration of genomic tools and techniques with advanced genetic resources such as nested association mapping and backcross nested association mapping could certainly address the genetic issues in maize improvement programs in developing countries. Huge diversity in tropical maize and its inherent capacity for doubled haploid technology offers advantage to apply the next generation genomic tools for accelerating production in marginal environments of tropical and subtropical world. Precision in phenotyping is the key for success of any molecular-breeding approach. This article reviews genomic technologies and their application to improve agronomic traits in tropical maize breeding has been reviewed in detail.

Genomics-assisted breeding in four major pulse crops of developing countries: present status and prospects.

PubMed

Bohra, Abhishek; Pandey, Manish K; Jha, Uday C; Singh, Balwant; Singh, Indra P; Datta, Dibendu; Chaturvedi, Sushil K; Nadarajan, N; Varshney, Rajeev K

2014-06-01

Given recent advances in pulse molecular biology, genomics-driven breeding has emerged as a promising approach to address the issues of limited genetic gain and low productivity in various pulse crops. The global population is continuously increasing and is expected to reach nine billion by 2050. This huge population pressure will lead to severe shortage of food, natural resources and arable land. Such an alarming situation is most likely to arise in developing countries due to increase in the proportion of people suffering from protein and micronutrient malnutrition. Pulses being a primary and affordable source of proteins and minerals play a key role in alleviating the protein calorie malnutrition, micronutrient deficiencies and other undernourishment-related issues. Additionally, pulses are a vital source of livelihood generation for millions of resource-poor farmers practising agriculture in the semi-arid and sub-tropical regions. Limited success achieved through conventional breeding so far in most of the pulse crops will not be enough to feed the ever increasing population. In this context, genomics-assisted breeding (GAB) holds promise in enhancing the genetic gains. Though pulses have long been considered as orphan crops, recent advances in the area of pulse genomics are noteworthy, e.g. discovery of genome-wide genetic markers, high-throughput genotyping and sequencing platforms, high-density genetic linkage/QTL maps and, more importantly, the availability of whole-genome sequence. With genome sequence in hand, there is a great scope to apply genome-wide methods for trait mapping using association studies and to choose desirable genotypes via genomic selection. It is anticipated that GAB will speed up the progress of genetic improvement of pulses, leading to the rapid development of cultivars with higher yield, enhanced stress tolerance and wider adaptability.

In situ earthworm breeding in orchards significantly improves the growth, quality and yield of papaya (Carica papaya L.)

PubMed Central

Xiang, Huimin; Guo, Lei; Zhao, Benliang

2016-01-01

The aim of this study was to compare the effects of four fertilizer applications—control (C), chemical fertilizer (F), compost (O), and in situ earthworm breeding (E)—on the growth, quality and yield of papaya (Carica papaya L.). In this study, 5 g plant−1 urea (CH4N2O, %N = 46.3%) and 100 g plant−1 microelement fertilizer was applied to each treatment. The fertilizer applications of these four treatments are different from each other. The results showed that the E treatment had the highest growth parameters over the whole growth period. At 127 days after transplantation, the order of plant heights from greatest to smallest was E > F > O > C, and the stem diameters were E > F > O > C, with significant differences between all treatments. Soluble-solid, sugar, vitamin C, and protein content significantly increased in the E treatment. In addition, the total acid and the electrical conductivity of the fruit significantly decreased in the E treatment. Fruit firmness clearly increased in the O treatment, and decreased in the F treatment. The fresh individual fruit weights, fruit numbers, and total yields were greatly improved in the F and E treatments, and the total yield of the E treatment was higher than that in the F treatment. In conclusion, the in situ earthworm breeding treatment performed better than conventional compost and chemical fertilizer treatments. Furthermore, in situ earthworm breeding may be a potential organic fertilizer application in orchards because it not only improves the fruit quality and yield but also reduces the amount of organic wastes from agriculture as a result of the activities of earthworms. PMID:27994969

Evidence for positive selection of taurine genes within a QTL region on chromosome X associated with testicular size in Australian Brahman cattle

PubMed Central

2014-01-01

Background Previous genome-wide association studies have identified significant regions of the X chromosome associated with reproductive traits in two Bos indicus-influenced breeds: Brahman cattle and Tropical Composites. Two QTL regions on this chromosome were identified in both breeds as strongly associated with scrotal circumference measurements, a reproductive trait previously shown to be useful for selection of young bulls. Scrotal circumference is genetically correlated with early age at puberty in both male and female offspring. These QTL were located at positions 69–77 and 81–92 Mb respectively, large areas each to which a significant number of potential candidate genes were mapped. Results To further characterise these regions, a bioinformatic approach was undertaken to identify novel non-synonymous SNP within the QTL regions of interest in Brahman cattle. After SNP discovery, we used conventional molecular assay technologies to perform studies of two candidate genes in both breeds. Non-synonymous SNP mapped to Testis-expressed gene 11 (Tex11) were associated (P < 0.001) with scrotal circumference in both breeds, and associations with percentage of normal sperm cells were also observed (P < 0.05). Evidence for recent selection was found as Tex11 SNP form a haplotype segment of Bos taurus origin that is retained within Brahman and Tropical Composite cattle with greatest reproductive potential. Conclusions Association of non-synonymous SNP presented here are a first step to functional genetic studies. Bovine species may serve as a model for studying the role of Tex11 in male fertility, warranting further in-depth molecular characterisation. PMID:24410912

Familiarity with and uptake of alternative methods to control sheep gastro-intestinal parasites on farms in England.

PubMed

Moore, Hope; Pandolfi, Fanny; Kyriazakis, Ilias

2016-05-15

A questionnaire was distributed electronically amongst sheep farmers in England; it aimed to provide a quantification of current anthelmintic practices, farmer awareness of the issue of anthelmintic resistance (AR) and the uptake, awareness and opinions surrounding conventional and alternative methods of nematode control. The majority of farmers relied on several anthelmintics and used faecal egg counts to identify worm problems. Although farmers were aware of the issue of AR amongst helminth parasites in the UK, there was a disconnection between such awareness and on farm problems and practice of nematode control. Grazing management was used by 52% of responders, while breeding for resistance and bioactive forages by 22 and 18% respectively. Farms with more than 500 ewes, and farmers who felt nematodes were a problem, had a higher probability of using selective breeding. Farmers who considered their wormer effective, had a qualification in agriculture and whose staff did not include any family members, were more likely to use bioactive forages; the opposite was the case if farmers dosed their lambs frequently. Amongst the alternatives, highest preference was for selective breeding and vaccination, if the latter was to become commercially available, with more respondents having a preference for breeding than actually using it. Several barriers to the uptake of an alternative were identified, the most influential factor being the cost to set it up and the length of time for which it would remain effective. The disconnection between awareness of AR and practice of nematode control on farm reinforces the need for emphasising the links between the causes of AR and the consequences of strategies to address its challenge. Copyright © 2016 Elsevier B.V. All rights reserved.

[New insight into Anopheles coluzzii Coetzee & Wilkerson, 2013 larval ecology in the Wouri estuary, Littoral-Cameroon].

PubMed

Mbida Mbida, A; Etang, J; Akono Ntonga, P; Eboumbou Moukoko, C; Awono-Ambene, P; Tagne, D; Talipouo, A; Ekoko, W; Binyang, J; Tchoffo, R; Lehman, G; Mimpfoundi, R

2017-05-01

Malaria vectors control is essentially based on the use of insecticides against adult mosquitoes. However because of the development of resistance to insecticides, there is now a renewed interest in the management of larval sources. The aim of the present study was to map and characterize the breeding sites of Anopheles coluzzii in the Wouri river estuary in Cameroon. Larval surveys were carried out between December 2013 and August 2014 in rural areas on the island of Manoka and urban area in Youpwe at Douala. Culicidae breeding sites identified were georeferenced and mapped. Their larval productivity was evaluated by the method of "dipping" and their physicochemical parameters measured by spectrophotometry and oximetry. Culicidae collected larvae were reared in the insectarium to the adult stage. Adult mosquitoes were subjected to morphological identification and those belonging to the Anopheles gambiae complex have subsequently been subjected to molecular identification by the PCR-RFLP technique. A total of 240 breeding sites were geo-referenced in the two sites, including 10 types. Abandoned containers and pools were the most frequent breeding sites respectively in Manoka and in Youpwe. After morphological and molecular identification, eleven mosquito species have been identified. Anopheles coluzzii and Culex quinquefasciatus were the most frequent species respectively in Manoka and in Youpwe. Mosquito density was higher in managed gutters and canoes respectively in Manoka and in Youpwe. Culex and Aedes genus were more frequent in the hollow palm and water wells respectively in Manoka and Youpwe. The productivity of breeding sites varied according to the physicochemical parameters. Species richness varied according to the type of breeding site. Anopheles coluzzii was observed for the first time in Cameroon in water storage containers, tires, discarded containers and canoes. This study highlighted diversity in the type of breeding site of An. coluzzii in the Wouri estuary, suggesting the adaptation of this species in its environment. These results could be used to develop an antilarval control strategy in Manoka and in Youpwe.

Using leaf optical properties to detect ozone effects on foliar biochemistry

USDA-ARS?s Scientific Manuscript database

Efficient methods for accurate and meaningful high-throughput plant phenotyping are limiting the development and breeding of stress-tolerant crops. A number of emerging techniques, specifically remote sensing methods, have been identified as promising tools for plant phenotyping. These remote-sensin...

Techniques for monitoring pileated woodpeckers.

Treesearch

Evelyn L Bull; Richard S. Holthausen; Marie G. Henjum

1990-01-01

Methods of locating pileated woodpeckers (Dryocopus pileatus) are described, including imitating pileated woodpecker vocalizations, identifying nest and roost trees, and finding foraging signs. Populations of pileated woodpeckers can be monitored by using (1) density of breeding pairs, (2) reproduction, and (3) presence or absence of birds. The...

Documenting Western Burrowing Owl Reproduction and Activity Patterns Using Motion-Activated Cameras

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, Derek B.; Greger, Paul D.

We used motion-activated cameras to monitor the reproduction and patterns of activity of the Burrowing Owl (Athene cunicularia) above ground at 45 burrows in south-central Nevada during the breeding seasons of 1999, 2000, 2001, and 2005. The 37 broods, encompassing 180 young, raised over the four years represented an average of 4.9 young per successful breeding pair. Young and adult owls were detected at the burrow entrance at all times of the day and night, but adults were detected more frequently during afternoon/early evening than were young. Motion-activated cameras require less effort to implement than other techniques. Limitations include photographingmore » only a small percentage of owl activity at the burrow; not detecting the actual number of eggs, young, or number fledged; and not being able to track individual owls over time. Further work is also necessary to compare the accuracy of productivity estimates generated from motion-activated cameras with other techniques.« less

Breeding of lilies and tulips—Interspecific hybridization and genetic background—

PubMed Central

Marasek-Ciolakowska, Agnieszka; Nishikawa, Tomotaro; Shea, Daniel J.; Okazaki, Keiichi

2018-01-01

Lilies and tulips (Liliaceae family) are economically very important ornamental bulbous plants. Here, we summarize major breeding goals, the role of an integrated method of cut-style pollination and fertilization followed by embryo rescue and mitotic and meiotic polyploidization involved in new assortment development. Both crops have been subjected to extensive interspecific hybridization followed by selection. Additionally, spontaneous polyploidization has played a role in their evolution. In lilies, there is a tendency to replace diploids with polyploid cultivars, whereas in tulip a majority of the cultivars that exist today are still diploid except for triploid Darwin hybrid tulips. The introduction of molecular cytogenetic techniques such as genomic in situ hybridization (GISH) permitted the detailed studies of genome composition in lily and tulip interspecific hybrids and to follow the chromosome inheritance in interspecific crosses. In addition, this review presents the latest information on phylogenetic relationship in lily and tulip and recent developments in molecular mapping using different DNA molecular techniques. PMID:29681746

Stakeholder involvement in establishing a milk quality sub-index in dairy cow breeding goals: a Delphi approach.

PubMed

Henchion, M; McCarthy, M; Resconi, V C; Berry, D P; McParland, S

2016-05-01

The relative weighting on traits within breeding goals are generally determined by bio-economic models or profit functions. While such methods have generally delivered profitability gains to producers, and are being expanded to consider non-market values, current approaches generally do not consider the numerous and diverse stakeholders that affect, or are affected, by such tools. Based on principles of respondent anonymity, iteration, controlled feedback and statistical aggregation of feedback, a Delphi study was undertaken to gauge stakeholder opinion of the importance of detailed milk quality traits within an overall dairy breeding goal for profit, with the aim of assessing its suitability as a complementary, participatory approach to defining breeding goals. The questionnaires used over two survey rounds asked stakeholders: (a) their opinion on incorporating an explicit sub-index for milk quality into a national breeding goal; (b) the importance they would assign to a pre-determined list of milk quality traits and (c) the (relative) weighting they would give such a milk quality sub-index. Results from the survey highlighted a good degree of consensus among stakeholders on the issues raised. Similarly, revelation of the underlying assumptions and knowledge used by stakeholders to make their judgements illustrated their ability to consider a range of perspectives when evaluating traits, and to reconsider their answers based on the responses and rationales given by others, which demonstrated social learning. Finally, while the relative importance assigned by stakeholders in the Delphi survey (4% to 10%) and the results of calculations based on selection index theory of the relative emphasis that should be placed on milk quality to halt any deterioration (16%) are broadly in line, the difference indicates the benefit of considering more than one approach to determining breeding goals. This study thus illustrates the role of the Delphi technique, as a complementary approach to traditional approaches, to defining breeding goals. This has implications for how breeding goals will be defined and in determining who should be involved in the decision-making process.

Trypanotolerance, an option for sustainable livestock production in areas at risk from trypanosomosis.

PubMed

d'Ieteren, G D; Authié, E; Wissocq, N; Murray, M

1998-04-01

Trypanosomosis is one of the major constraints on animal production in areas of Africa which have the greatest potential for significant increases in domestic livestock populations and livestock productivity. While the eradication of trypanosomosis from the entire continent is an unrealistic goal, considerable effort has been invested in the control of this disease through the use of trypanocidal drugs, management of the vector and exploitation of the genetic resistance exhibited by indigenous breeds. There is little hope that a conventional, anti-infection vaccine will be produced in the near future. Drug resistance is developing faster than generally thought. The control of the tsetse fly has been attempted over many decades. The decreasing efficacy of available trypanocidal drugs and the difficulties of sustaining tsetse control increase the imperative need to enhance trypanotolerance through selective breeding, either within breeds or through cross-breeding. Trypanotolerance has been defined as the relative capacity of an animal to control the development of the parasites and to limit their pathological effects, the most prominent of which is anaemia. A major constraint on selection for trypanotolerance in cattle, for both within-breed and cross-breeding programmes, has been the absence of practical reliable markers of resistance or susceptibility. Distinct humoral immune response to trypanosome infection is the major feature of bovine trypanotolerance. The role that these responses play in the control of infection or disease is being addressed by ongoing research, but remains a matter of speculation at present. Results in recent years have shown that packed cell volume (PCV) in particular and parasitaemia, the two principal indicators of trypanotolerance, are strongly correlated to animal performance. However, although direct effects of trypanosome infections on PCV and growth are obvious, more sensitive diagnostic methods for reflecting parasite control are required so that individual animals can be categorised reliably for their parasite control capability. One key finding is the major contribution made by each of the indicators evaluated to the overall trypanotolerance variance. Preliminary genetic parameters for PCV provide evidence that trypanotolerance is not only a breed characteristic but is also a heritable trait within the N'Dama population; this brings new opportunities for improved productivity through selection for trypanotolerance. More reliable estimation of genetic parameters of the indicators may well show that these parameters must be handled simultaneously for optimal progress. This would require diagnostics for assessing parasite control capability that identify trypanosome species more accurately, especially in mixed infections. A major advantage of trypanotolerant livestock, particularly N'Dama cattle, is the resistance or adaptation of this breed to many of the important pathogenes which prevail in the sub-humid and humid tropics. Research on practical indicators of resistance to these conditions will be required to establish relevant integrated strategies based on disease-resistant livestock. Selective breeding will require the integration of the traits that farmers hold important for their production systems.

Gametic embryogenesis and haploid technology as valuable support to plant breeding.

PubMed

Germanà, Maria Antonietta

2011-05-01

Plant breeding is focused on continuously increasing crop production to meet the needs of an ever-growing world population, improving food quality to ensure a long and healthy life and address the problems of global warming and environment pollution, together with the challenges of developing novel sources of biofuels. The breeders' search for novel genetic combinations, with which to select plants with improved traits to satisfy both farmers and consumers, is endless. About half of the dramatic increase in crop yield obtained in the second half of the last century has been achieved thanks to the results of genetic improvement, while the residual advance has been due to the enhanced management techniques (pest and disease control, fertilization, and irrigation). Biotechnologies provide powerful tools for plant breeding, and among these ones, tissue culture, particularly haploid and doubled haploid technology, can effectively help to select superior plants. In fact, haploids (Hs), which are plants with gametophytic chromosome number, and doubled haploids (DHs), which are haploids that have undergone chromosome duplication, represent a particularly attractive biotechnological method to accelerate plant breeding. Currently, haploid technology, making possible through gametic embryogenesis the single-step development of complete homozygous lines from heterozygous parents, has already had a huge impact on agricultural systems of many agronomically important crops, representing an integral part in their improvement programmes. The aim of this review was to provide some background, recent advances, and future prospective on the employment of haploid technology through gametic embryogenesis as a powerful tool to support plant breeding.

Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques.

PubMed

Vojdani, M; Torabi, K; Farjood, E; Khaledi, Aar

2013-09-01

Metal-ceramic crowns are most commonly used as the complete coverage restorations in clinical daily use. Disadvantages of conventional hand-made wax-patterns introduce some alternative ways by means of CAD/CAM technologies. This study compares the marginal and internal fit of copings cast from CAD/CAM and conventional fabricated wax-patterns. Twenty-four standardized brass dies were prepared and randomly divided into 2 groups according to the wax-patterns fabrication method (CAD/CAM technique and conventional method) (n=12). All the wax-patterns were fabricated in a standard fashion by means of contour, thickness and internal relief (M1-M12: representative of CAD/CAM group, C1-C12: representative of conventional group). CAD/CAM milling machine (Cori TEC 340i; imes-icore GmbH, Eiterfeld, Germany) was used to fabricate the CAD/CAM group wax-patterns. The copings cast from 24 wax-patterns were cemented to the corresponding dies. For all the coping-die assemblies cross-sectional technique was used to evaluate the marginal and internal fit at 15 points. The Student's t- test was used for statistical analysis (α=0.05). The overall mean (SD) for absolute marginal discrepancy (AMD) was 254.46 (25.10) um for CAD/CAM group and 88.08(10.67) um for conventional group (control). The overall mean of internal gap total (IGT) was 110.77(5.92) um for CAD/CAM group and 76.90 (10.17) um for conventional group. The Student's t-test revealed significant differences between 2 groups. Marginal and internal gaps were found to be significantly higher at all measured areas in CAD/CAM group than conventional group (p< 0.001). Within limitations of this study, conventional method of wax-pattern fabrication produced copings with significantly better marginal and internal fit than CAD/CAM (machine-milled) technique. All the factors for 2 groups were standardized except wax pattern fabrication technique, therefore, only the conventional group results in copings with clinically acceptable margins of less than 120um.

Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques

PubMed Central

Vojdani, M; Torabi, K; Farjood, E; Khaledi, AAR

2013-01-01

Statement of Problem: Metal-ceramic crowns are most commonly used as the complete coverage restorations in clinical daily use. Disadvantages of conventional hand-made wax-patterns introduce some alternative ways by means of CAD/CAM technologies. Purpose: This study compares the marginal and internal fit of copings cast from CAD/CAM and conventional fabricated wax-patterns. Materials and Method: Twenty-four standardized brass dies were prepared and randomly divided into 2 groups according to the wax-patterns fabrication method (CAD/CAM technique and conventional method) (n=12). All the wax-patterns were fabricated in a standard fashion by means of contour, thickness and internal relief (M1-M12: representative of CAD/CAM group, C1-C12: representative of conventional group). CAD/CAM milling machine (Cori TEC 340i; imes-icore GmbH, Eiterfeld, Germany) was used to fabricate the CAD/CAM group wax-patterns. The copings cast from 24 wax-patterns were cemented to the corresponding dies. For all the coping-die assemblies cross-sectional technique was used to evaluate the marginal and internal fit at 15 points. The Student’s t- test was used for statistical analysis (α=0.05). Results: The overall mean (SD) for absolute marginal discrepancy (AMD) was 254.46 (25.10) um for CAD/CAM group and 88.08(10.67) um for conventional group (control). The overall mean of internal gap total (IGT) was 110.77(5.92) um for CAD/CAM group and 76.90 (10.17) um for conventional group. The Student’s t-test revealed significant differences between 2 groups. Marginal and internal gaps were found to be significantly higher at all measured areas in CAD/CAM group than conventional group (p< 0.001). Conclusion: Within limitations of this study, conventional method of wax-pattern fabrication produced copings with significantly better marginal and internal fit than CAD/CAM (machine-milled) technique. All the factors for 2 groups were standardized except wax pattern fabrication technique, therefore, only the conventional group results in copings with clinically acceptable margins of less than 120um. PMID:24724133

Liposomal Bupivacaine Injection Technique in Total Knee Arthroplasty.

PubMed

Meneghini, R Michael; Bagsby, Deren; Ireland, Philip H; Ziemba-Davis, Mary; Lovro, Luke R

2017-01-01

Liposomal bupivacaine has gained popularity for pain control after total knee arthroplasty (TKA), yet its true efficacy remains unproven. We compared the efficacy of two different periarticular injection (PAI) techniques for liposomal bupivacaine with a conventional PAI control group. This retrospective cohort study compared consecutive patients undergoing TKA with a manufacturer-recommended, optimized injection technique for liposomal bupivacaine, a traditional injection technique for liposomal bupivacaine, and a conventional PAI of ropivacaine, morphine, and epinephrine. The optimized technique utilized a smaller gauge needle and more injection sites. Self-reported pain scores, rescue opioids, and side effects were compared. There were 41 patients in the liposomal bupivacaine optimized injection group, 60 in the liposomal bupivacaine traditional injection group, and 184 in the conventional PAI control group. PAI liposomal bupivacaine delivered via manufacturer-recommended technique offered no benefit over PAI ropivacaine, morphine, and epinephrine. Mean pain scores and the proportions reporting no or mild pain, time to first opioid, and amount of opioids consumed were not better with PAI liposomal bupivacaine compared with PAI ropivacaine, morphine, and epinephrine. The use of the manufacturer-recommended technique for PAI of liposomal bupivacaine does not offer benefit over a conventional, less expensive PAI during TKA. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Using Hydrologic Modeling to Screen Potential Environmental Management Methods for Malaria Vector Control in Niger

NASA Astrophysics Data System (ADS)

Gianotti, R. L.; Bomblies, A.; Eltahir, E. A.

2008-12-01

This study describes the use of HYDREMATS, a physically-based distributed hydrology model, to investigate environmental management methods for malaria vector control in the Sahelian village of Banizoumbou, Niger. The model operates at fine spatial and temporal scales to enable explicit simulation of individual pool dynamics and isolation of mosquito breeding habitats. The results showed that leveling of topographic depressions where temporary breeding habitats form during the rainy season could reduce the persistence time of a pool to less than the time needed for establishment of mosquito breeding, approximately 7 days. Increasing the surface soil permeability by ploughing could also reduce the persistence time of a pool but this technique was not as effective as leveling. Therefore it is considered that leveling should be the preferred of the two options where possible. This investigation demonstrates that management methods that modify the hydrologic environment have significant potential to contribute to malaria vector control and human health improvement in Sahelian Africa.

Molecular genetic analysis of ancient cattle bones excavated from archaeological sites in Jeju, Korea.

PubMed

Kim, Jae-Hwan; Oh, Ju-Hyung; Song, Ji-Hoon; Jeon, Jin-Tae; Han, Sang-Hyun; Jung, Yong-Hwan; Oh, Moon-You

2005-12-31

Ancient cattle bones were excavated from archaeological sites in Jeju, Korea. We used molecular genetic techniques to identify the species and establish its relationship to extant cattle breeds. Ancient DNA was extracted from four sources: a humerus (Gonae site, A.D. 700-800), two fragments of radius, and a tooth (Kwakji site, A.D. 0-900). The mitochondrial DNA (mtDNA) D-loop regions were cloned, sequenced, and compared with previously reported sequences of various cattle breeds (9 Asian, 8 European, and 3 African). The results revealed that these bones were of the breed, Bos taurus, and a phylogenetic tree indicated that the four cattle bones formed a monophyletic group with Jeju native black cattle. However, the patterns of sequence variation and reports from archaeological sites suggest that a few wild cattle, with a different maternal lineage, may have existed on Jeju Island. Our results will contribute to further studies of the origin of Jeju native cattle and the possible existence of local wild cattle.

Breeding population density and habitat use of Swainson's warblers in a Georgia floodplain forest

USGS Publications Warehouse

Wright, E.A.

2002-01-01

I examined density and habitat use of a Swainson's Warbler (Limnothlypis swainsonii) breeding population in Georgia. This songbird species is inadequately monitored, and may be declining due to anthropogenic alteration of floodplain forest breeding habitats. I used distance sampling methods to estimate density, finding 9.4 singing males/ha (CV = 0.298). Individuals were encountered too infrequently to produce a Iow-variance estimate, and distance sampling thus may be impracticable for monitoring this relatively rare species. I developed a set of multivariate habitat models using binary logistic regression techniques, based on measurement of 22 variables in 56 plots occupied by Swainson's Warblers and 110 unoccupied plots. Occupied areas were characterized by high stem density of cane (Arundinaria gigantea) and other shrub layer vegetation, and presence of abundant and accessible leaf litter. I recommend two habitat models, which correctly classified 87-89% of plots in cross-validation runs, for potential use in habitat assessment at other locations.

Ranges of North American breeding birds: visualizing long-term population changes in North American breeding birds

USGS Publications Warehouse

Price, Jeff

1995-01-01

These maps show changes in the distribution and abundance patterns of some North American birds for the last 20 years. For each species there are four maps, each representing the average distribution and abundance pattern over the five-year periods 1970-1974, 1975-1979, 1980-1984, and 1985-1989. The maps are based on data collected by the USFWS/CWS Breeding Bird Survey (BBS). Only BBS routes that were run at least once during each of the five-year periods were used (about 1300 routes). The maps were created in the software package Surfer using a kriging technique to interpolate mean relative abundances for areas where no routes were run. On each map, a portion of northeast Canada was blanked out because there were not enough routes to allow for adequate interpolation. All of the maps in this presentation use the same color scale (shown below). The minimum value mapped was 0.5 birds per route, which represents the edge of the species range.

Fibre Optic Sensors for Selected Wastewater Characteristics

PubMed Central

Chong, Su Sin; Abdul Aziz, A. R.; Harun, Sulaiman W.

2013-01-01

Demand for online and real-time measurements techniques to meet environmental regulation and treatment compliance are increasing. However the conventional techniques, which involve scheduled sampling and chemical analysis can be expensive and time consuming. Therefore cheaper and faster alternatives to monitor wastewater characteristics are required as alternatives to conventional methods. This paper reviews existing conventional techniques and optical and fibre optic sensors to determine selected wastewater characteristics which are colour, Chemical Oxygen Demand (COD) and Biological Oxygen Demand (BOD). The review confirms that with appropriate configuration, calibration and fibre features the parameters can be determined with accuracy comparable to conventional method. With more research in this area, the potential for using FOS for online and real-time measurement of more wastewater parameters for various types of industrial effluent are promising. PMID:23881131

Manufacturing Implant Supported Auricular Prostheses by Rapid Prototyping Techniques

PubMed Central

Karatas, Meltem Ozdemir; Cifter, Ebru Demet; Ozenen, Didem Ozdemir; Balik, Ali; Tuncer, Erman Bulent

2011-01-01

Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadvantages of conventional methods. Rapid prototyping technique has the potential to simplify the procedure and decrease the laboratory work required. It eliminates the need for measurement impression procedures and preparation of wax model to be performed by prosthodontists themselves In the near future this technology will become a standard for fabricating maxillofacial prostheses. PMID:21912504

Enhancing the crops to feed the poor.

PubMed

Huang, Jikun; Pray, Carl; Rozelle, Scott

2002-08-08

Solutions to the problem of how the developing world will meet its future food needs are broader than producing more food, although the successes of the 'Green Revolution' demonstrate the importance of technology in generating the growth in food output in the past. Despite these successes, the world still faces continuing vulnerability to food shortages. Given the necessary funding, it seems likely that conventional crop breeding, as well as emerging technologies based on molecular biology, genetic engineering and natural resource management, will continue to improve productivity in the coming decades.

Modern process designs for very high NGL recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finn, A.J.; Tomlinson, T.R.; Johnson, G.L.

1999-07-01

Typical margins between NGL and sales gas can justify consideration of very high NGL recovery from natural gas but traditionally, very high percentage recovery of propane or ethane has led to disproportionally high incremental power consumption and hence expensive compressors. Recent technical advances in the process design of cryogenic gas processing plants and in the equipment they se have led to a new breed of flowsheets that can cost-effectively give propane recoveries of as high as 99%. The high NGL recovery achievable with modern plants is economically possible due to their high thermodynamic efficiency. This is mainly because they usemore » the refrigeration available from the process more effectively and so recover more NGL. A high pressure rectification step can further improve NGL recovery economically, especially on larger plants. This residual NGL content would normally remain in the sales gas on a conventional turboexpander plant. Improved recovery of NGL can be obtained with little or no increase in sales gas compression power compared to conventional plants by judicious use of heat exchanger area. With high feed gas pressure and particularly with dense phase operation, the use of two expanders in series for feed gas let-down gives good process efficiency and relatively low specific power per ton of NGL recovered. Use of two expanders also avoids excessive liquid flows in the expander exhaust, thus improving the performance and reliability of the turboexpander system. The techniques discussed in the paper can be employed on revamps to improve NGL recovery. Improved process performance relies heavily on the use of efficient, multistream plant-fin exchangers and these can be easily added to an existing facility to increase NGL production.« less

Effect of shoulder abduction angle on biomechanical properties of the repaired rotator cuff tendons with 3 types of double-row technique.

PubMed

Mihata, Teruhisa; Fukuhara, Tetsutaro; Jun, Bong Jae; Watanabe, Chisato; Kinoshita, Mitsuo

2011-03-01

After rotator cuff repair, the shoulder is immobilized in various abduction positions. However, there is no consensus on the proper abduction angle. To assess the effect of shoulder abduction angle on the biomechanical properties of the repaired rotator cuff tendons among 3 types of double-row techniques. Controlled laboratory study. Thirty-two fresh-frozen porcine shoulders were used. A simulated rotator cuff tear was repaired by 1 of 3 double-row techniques: conventional double-row repair, transosseous-equivalent repair, and a combination of conventional double-row and bridging sutures (compression double-row repair). Each specimen underwent cyclic testing followed by tensile testing to failure at a simulated shoulder abduction angle of 0° or 40° on a material testing machine. Gap formation and failure loads were measured. Gap formation in conventional double-row repair at 0° (1.2 ± 0.5 mm) was significantly greater than that at 40° (0.5 ± 0.3mm, P = .01). The yield and ultimate failure loads for conventional double-row repair at 40° were significantly larger than those at 0° (P < .01), whereas those for transosseous-equivalent repair (P < .01) and compression double-row repair (P < .0001) at 0° were significantly larger than those at 40°. The failure load for compression double-row repair was the greatest among the 3 double-row techniques at both 0° and 40° of abduction. Bridging sutures have a greater effect on the biomechanical properties of the repaired rotator cuff tendon at a low abduction angle, and the conventional double-row technique has a greater effect at a high abduction angle. Proper abduction position after rotator cuff repair differs between conventional double-row repair and transosseous-equivalent repair. The authors recommend the use of the combined technique of conventional double-row and bridging sutures to obtain better biomechanical properties at both low and high abduction angles.

Femoral graft-tunnel angles in posterior cruciate ligament reconstruction: analysis with 3-dimensional models and cadaveric experiments.

PubMed

Kim, Sung-Jae; Chun, Yong-Min; Kim, Sung-Hwan; Moon, Hong-Kyo; Jang, Jae-Won

2013-07-01

The purpose of this study was to compare four graft-tunnel angles (GTA), the femoral GTA formed by three different femoral tunneling techniques (the outside-in, a modified inside-out technique in the posterior sag position with knee hyperflexion, and the conventional inside-out technique) and the tibia GTA in 3-dimensional (3D) knee flexion models, as well as to examine the influence of femoral tunneling techniques on the contact pressure between the intra-articular aperture of the femoral tunnel and the graft. Twelve cadaveric knees were tested. Computed tomography scans were performed at different knee flexion angles (0°, 45°, 90°, and 120°). Femoral and tibial GTAs were measured at different knee flexion angles on the 3D knee models. Using pressure sensitive films, stress on the graft of the angulation of the femoral tunnel aperture was measured in posterior cruciate ligament reconstructed cadaveric knees. Between 45° and 120° of knee flexion, there were no significant differences between the outside-in and modified inside-out techniques. However, the femoral GTA for the conventional inside-out technique was significantly less than that for the other two techniques (p<0.001). In cadaveric experiments using pressure-sensitive film, the maximum contact pressure for the modified inside-out and outside-in technique was significantly lower than that for the conventional inside-out technique (p=0.024 and p=0.017). The conventional inside-out technique results in a significantly lesser GTA and higher stress at the intra-articular aperture of the femoral tunnel than the outside-in technique. However, the results for the modified inside-out technique are similar to those for the outside-in technique.

Markers associated with disease resistance in Eastern oysters, Crassostrea virginica

USDA-ARS?s Scientific Manuscript database

Eastern oyster, Crassostrea viginica, is an economically important aquaculture species in the USA, but production has been impacted by diseases such as dermo and MSX. Efforts have been put into the development of disease-resistant oyster lines using selective breeding techniques. However, these met...

Advances in proteomics research for peanut genetics and breeding

USDA-ARS?s Scientific Manuscript database

Crop trait improvement aimed at increased yield and quality relies on an understanding of the biology of the plant, particular protein-protein interactions. In this regard, the application of “-omics” techniques combined with field-level agronomy is poised to deliver novel insight into previously u...

Evaluation of hippuric acid content in goat milk as a marker of feeding regimen.

PubMed

Carpio, A; Bonilla-Valverde, D; Arce, C; Rodríguez-Estévez, V; Sánchez-Rodríguez, M; Arce, L; Valcárcel, M

2013-09-01

Organic producers, traders, and consumers must address 2 issues related to milk: authentication of the production system and nutritional differentiation. The presence of hippuric acid (HA) in goat milk samples has been proposed as a possible marker to differentiate the feeding regimen of goats. The objective of this work is to check the hypothesis that HA could be a marker for the type of feeding regimen of goats by studying the influence of production system (conventional or organic) and feeding regimen (with or without grazing fodder). With this purpose, commercial cow and goat milk samples (n=27) and raw goat milk samples (n=185; collected from different breeds, localizations, and dates) were analyzed. Samples were grouped according to breed, feeding regimen, production system, and origin to compare HA content by ANOVA and honestly significant difference Tukey test at a confidence level of ≥95%. Hippuric acid content was obtained by analyzing milk samples with capillary electrophoresis. This method was validated by analyzing part of the samples with HPLC as a reference technique. Sixty-nine raw goat milk samples (of the total 158 samples analyzed in this work) were quantified by capillary electrophoresis. In these samples, the lowest average content for HA was 7±3 mg/L. This value corresponds to a group of conventional raw milk samples from goats fed with compound feed. The highest value of this group was 28±10 mg/L, corresponding to goats fed compound feed plus grass. Conversely, for organic raw goat milk samples, the highest concentration was 67±14 mg/L, which corresponds to goats fed grass. By contrast, the lowest value of this organic group was 26±10 mg/L, which belongs to goats fed organic compounds. Notice that the highest HA average content was found in samples from grazing animals corresponding to the organic group. This result suggests that HA is a good marker to determine the type of goats feeding regimen; a high content of HA represents a diet based mainly or exclusively on eating green grass (grazing), independently of the production system. Hence, this marker would not be useful for the actual organic policies to distinguish organic milk under the current regulations, because organic dairy ruminants can be fed organic compound feed and conserved fodder without grazing at all. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Population and habitat viability assessment for the Wyoming toad (Bufo baxteri): Final workshop report

USGS Publications Warehouse

2001-01-01

The Wyoming toad was listed as an endangered species under the Endangered Species Act on January 17, 1984, with a recovery plan approved in 1991. Currently the total population of the Wyoming toad includes approximately 200 animals in the captive breeding program and as few as 62 toads surviving at reintroduction sites in the Laramie Basin based upon fall 2000 survey data (after releases of more than 10,000 toads and tadpoles since 1995). Necessary conservation measures include improving reproduction and survival in the captive breeding program, improving survival at reintroduction sites, developing techniques to control the effects of the amphibian chytrid fungus, and eliminating threats and further habitat degradation in the wild.

A New Correction Technique for Strain-Gage Measurements Acquired in Transient-Temperature Environments

NASA Technical Reports Server (NTRS)

Richards, W. Lance

1996-01-01

Significant strain-gage errors may exist in measurements acquired in transient-temperature environments if conventional correction methods are applied. As heating or cooling rates increase, temperature gradients between the strain-gage sensor and substrate surface increase proportionally. These temperature gradients introduce strain-measurement errors that are currently neglected in both conventional strain-correction theory and practice. Therefore, the conventional correction theory has been modified to account for these errors. A new experimental method has been developed to correct strain-gage measurements acquired in environments experiencing significant temperature transients. The new correction technique has been demonstrated through a series of tests in which strain measurements were acquired for temperature-rise rates ranging from 1 to greater than 100 degrees F/sec. Strain-gage data from these tests have been corrected with both the new and conventional methods and then compared with an analysis. Results show that, for temperature-rise rates greater than 10 degrees F/sec, the strain measurements corrected with the conventional technique produced strain errors that deviated from analysis by as much as 45 percent, whereas results corrected with the new technique were in good agreement with analytical results.

Germplasm-regression-combined (GRC) marker-trait association identification in plant breeding: a challenge for plant biotechnological breeding under soil water deficit conditions.

PubMed

Ruan, Cheng-Jiang; Xu, Xue-Xuan; Shao, Hong-Bo; Jaleel, Cheruth Abdul

2010-09-01

In the past 20 years, the major effort in plant breeding has changed from quantitative to molecular genetics with emphasis on quantitative trait loci (QTL) identification and marker assisted selection (MAS). However, results have been modest. This has been due to several factors including absence of tight linkage QTL, non-availability of mapping populations, and substantial time needed to develop such populations. To overcome these limitations, and as an alternative to planned populations, molecular marker-trait associations have been identified by the combination between germplasm and the regression technique. In the present preview, the authors (1) survey the successful applications of germplasm-regression-combined (GRC) molecular marker-trait association identification in plants; (2) describe how to do the GRC analysis and its differences from mapping QTL based on a linkage map reconstructed from the planned populations; (3) consider the factors that affect the GRC association identification, including selections of optimal germplasm and molecular markers and testing of identification efficiency of markers associated with traits; and (4) finally discuss the future prospects of GRC marker-trait association analysis used in plant MAS/QTL breeding programs, especially in long-juvenile woody plants when no other genetic information such as linkage maps and QTL are available.

Breeding for seedless grapes using Chinese wild Vitis spp. II. In vitro embryo rescue and plant development.

PubMed

Ji, Wei; Wang, Yuejin

2013-12-01

Since 1982, the embryo rescue technique has been widely applied to embryo germination of stenospermic grapes in cross-breeding programmes. This project aimed to: (1) use embryos to breed new seedless cultivars of Vitis vinifera as the female parents utilising wild Chinese Vitis spp. as the male parents; and (2) develop an efficient method for in vitro embryo rescue and plant development. Among the different genotypes, the productions of hybrid plants were significantly different, ranged from 21.1% ('Ruby Seedless' × 'Beichun') to only 1.1% ('Pink Seedless' × 'Beichun'), except for the combinations from which no surviving seedlings were obtained. We collected hybridisation fruits from 28 June to 3 August, and obtained their best sampling times described within days after flowering. The highest rates of embryo formation (24.3%) and plant development (91.4%) were found when ovules of 'Ruby Seedless' were cultured in MM4 + 500 mg L(-1) mashed banana. Seven new hybrids of V. vinifera with wild Chinese Vitis spp. were obtained. As a result of early nuclear-free character identification, 17 seedless grape lines were obtained. An efficient system of seedless grape breeding through embryo rescue was also established. © 2013 Society of Chemical Industry.

Preferred natural food of breeding Kakapo is a high value source of calcium and vitamin D.

PubMed

von Hurst, P R; Moorhouse, R J; Raubenheimer, D

2016-11-01

The Kakapo, a large NZ native parrot, is under severe threat of extinction. Kakapo breed only in years when the local podocarps, including rimu (Dacrydium cupressinum), are fruiting heavily, and the fruit are the preferred food both in the diet of breeding females and for provisioning chicks. Attempts to provide a supplementary food during years of poor fruit supply have failed to encourage breeding. Nutrient analysis of rimu berries reveals high calcium content (8.4mg/g dry matter) which would be essential for both egg shell production and the growing skeleton of the chick. Vitamin D is also critical for these processes and for the maintenance of calcium homeostasis, but the source of vitamin D for these nocturnal, ground-dwelling vegetarians is unknown. To examine the vitamin D status of adult Kakapo, and to investigate the possibility that rimu berries provide vitamin D as well as calcium, thus differentiating them from the supplementary foods provided to date. Previously collected and frozen serum from 10 adult birds (6 females, 4 males) was assayed for 25(OH)D 3 and D 2 . Two batches of previously frozen rimu berries were analysed for vitamin D 3 and D 2 . Vitamin D status of the 10 adult birds was very low; mean 4.9nmol/l, range 1-14nmol/l 25(OH)D 3 . No 25(OH)D 2 was detected in any of the birds. High levels of D 2 and moderate levels of D 3 were found in the rimu berries. Traditionally it has been considered that the D 3 isoform of this endogenously produced secosteroid is produced only in animals. However, D 3 has been reported in the leaves of plants of the Solanacae family (tomato, potato, capsicum). The avian vitamin D receptor (VDR) is thought to have a much greater affinity for the D 3 form. Therefore if rimu fruit are able to provide breeding Kakapo with D 3 , and are a plentiful source of calcium, they could be the perfect food package for breeding and nesting birds. Of wider importance, this finding challenges conventional understanding that D3 production is exclusive to animals, and that there are no high concentration food sources of vitamin D. Copyright © 2015 Elsevier Ltd. All rights reserved.

Non chemical control of helminths in ruminants: adapting solutions for changing worms in a changing world.

PubMed

Hoste, H; Torres-Acosta, J F J

2011-08-04

Infections with gastrointestinal nematodes (GIN) remain a major threat for ruminant production, health and welfare associated with outdoor breeding. The control of these helminth parasites has relied on the strategic or tactical use of chemical anthelmintic (AH) drugs. However, the expanding development and diffusion of anthelmintic resistance in nematode populations imposes the need to explore and validate novel solutions (or to re-discover old knowledge) for a more sustainable control of GIN. The different solutions refer to three main principles of action. The first one is to limit the contact between the hosts and the infective larvae in the field through grazing management methods. The latter were described since the 1970s and, at present, they benefit from innovations based on computer models. Several biological control agents have also been studied in the last three decades as potential tools to reduce the infective larvae in the field. The second principle aims at improving the host response against GIN infections relying on the genetic selection between or within breeds of sheep or goats, crossbreeding of resistant and susceptible breeds and/or the manipulation of nutrition. These approaches may benefit from a better understanding of the potential underlying mechanisms, in particular in regard of the host immune response against the worms. The third principle is the control of GIN based on non-conventional AH materials (plant or mineral compounds). Worldwide studies show that non conventional AH materials can eliminate worms and/or negatively affect the parasite's biology. The recent developments and pros and cons concerning these various options are discussed. Last, some results are presented which illustrate how the integration of these different solutions can be efficient and applicable in different systems of production and/or epidemiological conditions. The integration of different control tools seems to be a pre-requisite for the sustainable management of GIN infections. This new era of GIN management requires a new paradigm: to achieve enough control to reduce the negative impact of GIN infections enabling an optimum level of production, health and welfare. Copyright © 2011 Elsevier B.V. All rights reserved.

Customized recommendations for production management clusters of North American automatic milking systems.

PubMed

Tremblay, Marlène; Hess, Justin P; Christenson, Brock M; McIntyre, Kolby K; Smink, Ben; van der Kamp, Arjen J; de Jong, Lisanne G; Döpfer, Dörte

2016-07-01

Automatic milking systems (AMS) are implemented in a variety of situations and environments. Consequently, there is a need to characterize individual farming practices and regional challenges to streamline management advice and objectives for producers. Benchmarking is often used in the dairy industry to compare farms by computing percentile ranks of the production values of groups of farms. Grouping for conventional benchmarking is commonly limited to the use of a few factors such as farms' geographic region or breed of cattle. We hypothesized that herds' production data and management information could be clustered in a meaningful way using cluster analysis and that this clustering approach would yield better peer groups of farms than benchmarking methods based on criteria such as country, region, breed, or breed and region. By applying mixed latent-class model-based cluster analysis to 529 North American AMS dairy farms with respect to 18 significant risk factors, 6 clusters were identified. Each cluster (i.e., peer group) represented unique management styles, challenges, and production patterns. When compared with peer groups based on criteria similar to the conventional benchmarking standards, the 6 clusters better predicted milk produced (kilograms) per robot per day. Each cluster represented a unique management and production pattern that requires specialized advice. For example, cluster 1 farms were those that recently installed AMS robots, whereas cluster 3 farms (the most northern farms) fed high amounts of concentrates through the robot to compensate for low-energy feed in the bunk. In addition to general recommendations for farms within a cluster, individual farms can generate their own specific goals by comparing themselves to farms within their cluster. This is very comparable to benchmarking but adds the specific characteristics of the peer group, resulting in better farm management advice. The improvement that cluster analysis allows for is characterized by the multivariable approach and the fact that comparisons between production units can be accomplished within a cluster and between clusters as a choice. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Reinforcing the role of the conventional C-arm - a novel method for simplified distal interlocking

PubMed Central

2012-01-01

Background The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure. Methods The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required. Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. Results A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (p < 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (p = 0.001). Operating time per screw (from first shot to screw tightened) was on average 22% reduced by guided freehand (p = 0.018). Conclusions In an experimental setting, the newly developed guided freehand technique for distal interlocking has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method utilizes established clinical workflows and does not require cost intensive add-on devices or extensive training. The underlying principle carries potential to assist implant positioning in numerous other applications within orthopedics and trauma from screw insertions to placement of plates, nails or prostheses. PMID:22276698

Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients.

PubMed

Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

2018-01-01

The objective of the present study was to compare patients' acceptability, comfort and stress with conventional and digital impressions. Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum ® , Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600 ® , Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients' acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques.