Sample records for core catcher performance

  1. Transient experiments with thermite melts for a core catcher concept based on water addition from below

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tromm, W.; Alsmeyer, H.

    1995-09-01

    A core catcher concept is proposed to be integrated into a new pressurized water reactor. The core catcher achieves coolability by spreading and fragmentation of the ex-vessel core melt based on a process of water inlet from the bottom through the melt. By highly effective heat removal that uses evaporating water in direct contact with the fragmented melt, the corium melt would solidify in a short time period, and long-term cooling could be maintained by continuous water evaporation from the flooded porous or fragmented corium bed. The key process for obtaining coolability is the coupling of the three effects: (a)more » water ingression from below and its evaporation, (b) break up and fragmentation of the corium layer, and (c) heat transfer and solidification of the let. These mechanisms are investigated in transient medium-scale experiments with thermite melts. The experimental setup represents a section of the proposed core catcher design. A thermite melt is located on the core catcher plate with a passive water supply from the bottom. After generation of the melt, the upper sacrificial layer is eroded until water penetrates into the melt for the bottom through plugs in the supporting plate. Fragmentation and fast solidification of the melt are observed, and long-term heat removal is guaranteed by the coolant water flooding the porous melt. Water inflow is sufficient to safely remove the decay heat in a comparable corium layer. The open porosity is created by the vapor streaming through the melt during the solidification process. Fracture of the solid by thermomechanical stresses is not observed. The experiments in their current stage show the principal feasibility of the proposed cooling concept and are used to prepare large-scale experiments to be performed in the modified BETA facility with sustained heating of the melt.« less

  2. Emergency deployable core catcher

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosewell, M.P.

    An emergency melt down core catcher apparatus for a nuclear reactor having a retrofitable eutectic solute holding vessel connected to a core containment vessel with particle transferring fluid and particles or granules of solid eutectic solute materials contained therein and transferable by automatically operated valve means to transport and position the solid eutectic solute material in a position below the core to catch and react with any partial or complete melt down of the fuel core.

  3. Characterisation of Ceramic-Coated 316LN Stainless Steel Exposed to High-Temperature Thermite Melt and Molten Sodium

    NASA Astrophysics Data System (ADS)

    Ravi Shankar, A.; Vetrivendan, E.; Shukla, Prabhat Kumar; Das, Sanjay Kumar; Hemanth Rao, E.; Murthy, S. S.; Lydia, G.; Nashine, B. K.; Mallika, C.; Selvaraj, P.; Kamachi Mudali, U.

    2017-11-01

    Currently, stainless steel grade 316LN is the material of construction widely used for core catcher of sodium-cooled fast reactors. Design philosophy for core catcher demands its capability to withstand corium loading from whole core melt accidents. Towards this, two ceramic coatings were investigated for its application as a layer of sacrificial material on the top of core catcher to enhance its capability. Plasma-sprayed thermal barrier layer of alumina and partially stabilised zirconia (PSZ) with an intermediate bond coat of NiCrAlY are selected as candidate material and deposited over 316LN SS substrates and were tested for their suitability as thermal barrier layer for core catcher. Coated specimens were exposed to high-temperature thermite melt to simulate impingement of molten corium. Sodium compatibility of alumina and PSZ coatings were also investigated by exposing samples to molten sodium at 400 °C for 500 h. The surface morphology of high-temperature thermite melt-exposed samples and sodium-exposed samples was examined using scanning electron microscope. Phase identification of the exposed samples was carried out by x-ray diffraction technique. Observation from sodium exposure tests indicated that alumina coating offers better protection compared to PSZ coating. However, PSZ coating provided better protection against high-temperature melt exposure, as confirmed during thermite melt exposure test.

  4. Carbon and nitrogen isotope composition of core catcher samples from the ICDP deep drilling at Laguna Potrok Aike (Patagonia, Argentina)

    NASA Astrophysics Data System (ADS)

    Luecke, Andreas; Wissel, Holger; Mayr*, Christoph; Oehlerich, Markus; Ohlendorf, Christian; Zolitschka, Bernd; Pasado Science Team

    2010-05-01

    The ICDP project PASADO aims to develop a detailed paleoclimatic record for the southern part of the South American continent from sediments of Laguna Potrok Aike (51°58'S, 70°23'W), situated in the Patagonian steppe east of the Andean cordillera and north of the Street of Magellan. The precursor project SALSA recovered the Holocene and Late Glacial sediment infill of Laguna Potrok Aike and developed the environmental history of the semi-arid Patagonian steppe by a consequent interdisciplinary multi-proxy approach (e.g. Haberzettl et al., 2007). From September to November 2008 the ICDP deep drilling took place and successfully recovered in total 510 m of sediments from two sites resulting in a composite depth of 106 m for the selected main study Site 2. A preliminary age model places the record within the last 50.000 years. During the drilling campaign, the core catcher content of each drilled core run (3 m) was taken as separate sample to be shared and distributed between involved laboratories long before the main sampling party. A total of 70 core catcher samples describe the sediments of Site 2 and will form the base for more detailed investigations on the palaeoclimatic history of Patagonia. We here report on the organic carbon and nitrogen isotope composition of bulk sediment and plant debris of the core catcher samples. Similar investigations were performed for Holocene and Late Glacial sediments of Laguna Potrok Aike revealing insights into the organic matter dynamics of the lake and its catchment as well as into climatically induced hydrological variations with related lake level fluctuations (Mayr et al., 2009). The carbon and nitrogen content of the core catcher fine sediment fraction (<200 µm) is low to very low (around 1 % and 0.1 %, respectively) and requires particular attention in isotope analysis. The carbon isotope composition shows comparably little variation around a value of -26.0 per mil. The positive values of the Holocene and the Late Glacial (up to 22.0 per mil) are only sporadically reached down core. Compared to this, separated moss debris is remarkably 13C depleted with a minimum at 31.5 per mil. The nitrogen isotope ratios of glacial Laguna Potrok Aike sediments are lower (2.5 per mil) than those of the younger part of the record. The core catcher samples indicate several oscillations between 0.5 and 3.5 per mil. Data suggest a correlation between nitrogen isotopes and C/N ratios, but no linear relation between carbon isotopes and carbon content and an only weak relationship between carbon and nitrogen isotopes. Increasing nitrogen isotope values from 8000 cm downwards could probably be related to changed environmental conditions of Marine Isotope Stage 3 (MIS 3) compared to Marine Isotope Stage 2 (MIS 2). This will be further evaluated with higher resolution from the composite profile including a detailed study of discrete plant debris layers. References Haberzettl, T. et al. (2007). Lateglacial and Holocene wet-dry cycles in southern Patagonia: chronology, sedimentology and geochemistry of a lacustrine record from Laguna Potrok Aike, Argentina. The Holocene, 17: 297-310. Mayr, C. et al. (2009). Isotopic and geochemical fingerprints of environmental changes during the last 16,000 years on lacustrine organic matter from Laguna Potrok Aike (southern Patagonia, Argentina). Journal of Paleolimnology, 42: 81-102.

  5. The Effect of Intermittent Vest Cooling on Thermoregulation and Cardiovascular Strain in Baseball Catchers.

    PubMed

    Bishop, Stacy H; Szymanski, David J; Ryan, Greg A; Herron, Robert L; Bishop, Phil A

    2017-08-01

    Bishop, SH, Szymanski, DJ, Ryan, GA, Herron, RL, and Bishop, PA. The effect of intermittent vest cooling on thermoregulation and cardiovascular strain in baseball catchers. J Strength Cond Res 31(8): 2060-2065, 2017-Baseball catchers are exposed to multiple physiological challenges while playing outside during the spring and summer months, many of which deal with recovery and thermoregulation. The purpose of this study was to investigate the effect of intermittent cooling on core temperature, cardiovascular strain, exertion, and recovery during a simulated catching performance in the heat. Six trained college-aged baseball catchers performed in a controlled, hot (35° C), and humid (25% relative humidity) environment in a counter-balanced, cross-over design. Ice vest cooling (VC) was used as a cooling modality and was compared with a control of no cooling (NC). Rectal temperature (Tre), heart rate (HR), rating of perceived exertion (RPE), and perceived recovery scale (PRS) were recorded before and after each simulated inning. All activities took place in a heat chamber, and each inning consisted of catchers receiving 12 pitches in their position followed by 6 minutes of recovery. Nine total innings were performed, and 27 total innings were performed with each of the 2 treatments. A significantly smaller mean Tre change was seen in VC when compared with NC (0.58 ± 0.2° C, 0.98 ± 0.2° C, p ≤ 0.01, respectively). Rating of perceived exertion was significantly lower and PRS was significantly improved for VC compared with NC (both p ≤ 0.05). Mean recovery HR during VC was significantly lower than NC in the fifth (VC = 84 ± 8 b·min, NC = 90 ± 9 b·min, p = 0.04), seventh (VC = 84 ± 3 b·min, NC = 92 ± 7 b·min, p = 0.02), and ninth (VC = 85 ± 7 b·min, NC = 93 ± 5 b·min, p = 0.01) innings. Heart rate during catching was significantly lower at the end of the VC trials when compared with NC (108 ± 16 b·min vs. 120 ± 19 b·min, p = 0.02, respectively). Vest cooling decreased heat strain, cardiovascular strain, and RPE while it improved perceived recovery in catchers over a simulated 3-game series performed in hot conditions.

  6. Vibracoring on the New Jersey Shelf: Investigating the Stratigraphic Response to 50,000 Years of Eustasy

    DTIC Science & Technology

    2007-01-01

    accomplished during weather conditions that otherwise precluded operating the vibracorer. More than 100 gravity core casts were conducted. When...barrel, or shelly /sandy material caught in the core catcher. We bagged all samples we deemed significant enough to keep. All gravity core

  7. Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment

    PubMed Central

    Calautit, John Kaiser; Chaudhry, Hassam Nasarullah; Hughes, Ben Richard

    2015-01-01

    The data presented in this article were the basis for the study reported in the research articles entitled ‘Climate responsive behaviour heat pipe technology for enhanced passive airside cooling’ by Chaudhry and Hughes [10] which presents the passive airside cooling capability of heat pipes in response to gradually varying external temperatures and related to the research article “CFD and wind tunnel study of the performance of a uni-directional wind catcher with heat transfer devices” by Calautit and Hughes [1] which compares the ventilation performance of a standard roof mounted wind catcher and wind catcher incorporating the heat pipe technology. Here, we detail the wind tunnel test set-up and inflow conditions and the methodologies for the transient heat pipe experiment and analysis of the integration of heat pipes within the control domain of a wind catcher design. PMID:26958604

  8. Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment.

    PubMed

    Calautit, John Kaiser; Chaudhry, Hassam Nasarullah; Hughes, Ben Richard

    2015-12-01

    The data presented in this article were the basis for the study reported in the research articles entitled 'Climate responsive behaviour heat pipe technology for enhanced passive airside cooling' by Chaudhry and Hughes [10] which presents the passive airside cooling capability of heat pipes in response to gradually varying external temperatures and related to the research article "CFD and wind tunnel study of the performance of a uni-directional wind catcher with heat transfer devices" by Calautit and Hughes [1] which compares the ventilation performance of a standard roof mounted wind catcher and wind catcher incorporating the heat pipe technology. Here, we detail the wind tunnel test set-up and inflow conditions and the methodologies for the transient heat pipe experiment and analysis of the integration of heat pipes within the control domain of a wind catcher design.

  9. Development work for a borax internal core-catcher for a gas-cooled fast reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Donne, M.D.; Dorner, S.; Schumacher, G.

    1978-07-01

    Preliminary thermal calculations show that a corecatcher, which is able to cope with the complete meltdown of the core and blankets of a 1000-MW(electric) gas-cooled fast reactor, appears to be feasible. This core-catcher is based on borax (Na/sub 2/B/sub 4/O/sub 7/) dissolving the oxide fuel and the fission products occurring in oxide form. The borax is contained in steel boxes forming a 2.2-m-thick slab on the base of the reactor cavity inside the prestressed concrete reactor vessel (PCRV), just underneath the reactor core. After a complete meltdown accident, the fission products, in oxide form, are dispersed in the pool formedmore » by the liquid borax. The metallic fission products are contained in the steel lying below the borax pool and in contact with the water-cooled PCRV liner. The volumetric power density of the molten core is conveniently reduced as it is dissolved in the borax, and the resulting heat fluxes at the borders of the pool can be safely carried away through the PCRV liner and its water cooling system.« less

  10. Children's catching performance when the demands on the postural system is altered.

    PubMed

    Angelakopoulos, Georgios T; Tsorbatzoudis, Haralambos; Grouios, George

    2014-07-01

    In many dynamic interceptive actions performers need to integrate activity of manual and postural subsystems for successful performance. Groups of different skill level (poor and good catchers), (mean age = 9.1 and 9.4 respectively) were required to perform one-handed catches under different postural constraints: standing; standing in contact with a postural support aid by their side (PSAS) or to the left of their trunk (PSAF); Tandem; and sitting (control). Results revealed that, for poor catchers, the number of successful catches increased and grasp errors decreased significantly when sitting and with both postural aids in comparison with standing alone and Tandem conditions. Kinematic analyses showed that the postural aid devices reduced head sway in the anterior-posterior direction, while the PSAF reduced lateral head sway. The poor catchers' performance benefited from an enlarged support surface, and reduction of lateral sway. Good catchers performed successfully under all task constraints, signifying the existence of a functional relationship between postural and grasping subsystems during performance. The results are discussed in the frame of Bernstein's (1967) and Newell's (1986) theory.

  11. The relationship between gluteal muscle activation and throwing kinematics in baseball and softball catchers.

    PubMed

    Plummer, Hillary A; Oliver, Gretchen D

    2014-01-01

    The purpose of this study was to determine the relationship between gluteal muscle activation and pelvis and trunk kinematics when catchers throw to second base. Forty-two baseball and softball catchers (14.74 ± 4.07 years; 161.85 ± 15.24 cm; 63.38 ± 19.98 kg) participated in this study. Muscle activity of the bilateral gluteus maximus and medius as well as pelvis and trunk kinematics throughout the throwing motion were analyzed. It was discovered that at foot contact, there were 2 significant inverse relationships between stride leg gluteus maximus activity and pelvis axial rotation (r = -0.31, r2 = 0.10, p = 0.05), and between trunk axial rotation and pelvis lateral flexion (r = -0.34, r2= 0.12, p = 0.03). In addition, at foot contact, a significant positive relationship between the drive leg (throwing arm side) and trunk flexion (r = 0.33, r2 = 0.11, p = 0.04) was present. The results of this study provide evidence of gluteal activation both concentrically and eccentrically, in attempt to control the pelvis and trunk during the throwing motion of catchers. The gluteal muscles play a direct role in maintaining the stability of the pelvis, and catchers should incorporate strengthening of the entire lumbopelvic-hip complex into their training regimen. Incorporating concentric and eccentric gluteal exercises will help to improve musculoskeletal core stability, thereby assisting in upper extremity injury prevention.

  12. Foul tip impact attenuation of baseball catcher masks using head impact metrics

    PubMed Central

    White, Terrance R.; Cutcliffe, Hattie C.; Shridharani, Jay K.; Wood, Garrett W.; Bass, Cameron R.

    2018-01-01

    Currently, no scientific consensus exists on the relative safety of catcher mask styles and materials. Due to differences in mass and material properties, the style and material of a catcher mask influences the impact metrics observed during simulated foul ball impacts. The catcher surrogate was a Hybrid III head and neck equipped with a six degree of freedom sensor package to obtain linear accelerations and angular rates. Four mask styles were impacted using an air cannon for six 30 m/s and six 35 m/s impacts to the nasion. To quantify impact severity, the metrics peak linear acceleration, peak angular acceleration, Head Injury Criterion, Head Impact Power, and Gadd Severity Index were used. An Analysis of Covariance and a Tukey’s HSD Test were conducted to compare the least squares mean between masks for each head injury metric. For each injury metric a P-Value less than 0.05 was found indicating a significant difference in mask performance. Tukey’s HSD test found for each metric, the traditional style titanium mask fell in the lowest performance category while the hockey style mask was in the highest performance category. Limitations of this study prevented a direct correlation from mask testing performance to mild traumatic brain injury. PMID:29856814

  13. Combination pipe-rupture mitigator and in-vessel core catcher. [LMFBR

    DOEpatents

    Tilbrook, R.W.; Markowski, F.J.

    1982-03-09

    A device is described which mitigates against the effects of a failed coolant loop in a nuclear reactor by restricting the outflow of coolant from the reactor through the failed loop and by retaining any particulated debris from a molten core which may result from coolant loss or other cause. The device reduces the reverse pressure drop through the failed loop by limiting the access of coolant in the reactor to the inlet of the failed loop. The device also spreads any particulated core debris over a large area to promote cooling.

  14. Combination pipe rupture mitigator and in-vessel core catcher

    DOEpatents

    Tilbrook, Roger W.; Markowski, Franz J.

    1983-01-01

    A device which mitigates against the effects of a failed coolant loop in a nuclear reactor by restricting the outflow of coolant from the reactor through the failed loop and by retaining any particulated debris from a molten core which may result from coolant loss or other cause. The device reduces the reverse pressure drop through the failed loop by limiting the access of coolant in the reactor to the inlet of the failed loop. The device also spreads any particulated core debris over a large area to promote cooling.

  15. Spatial and temporal adaptations that accompany increasing catching performance during learning.

    PubMed

    Mazyn, Liesbeth I N; Lenoir, Matthieu; Montagne, Gilles; Savelsbergh, Geert J P

    2007-11-01

    The authors studied changes in performance and kinematics during the acquisition of a 1-handed catch. Participants were 8 women who took an intensive 2-week training program during which they evolved from poor catchers to subexpert catchers. An increased temporal consistency, shift in spatial location of ball-hand contact away from the body, and higher peak velocity of the transport of the hand toward the ball accompanied their improvement in catching performance. Moreover, novice catchers first adjusted spatial characteristics of the catch to the task constraints and fine-tuned temporal features only later during learning. A principal components analysis on a large set of kinematic variables indicated that a successful catch depends on (a) forward displacement of the hand and (b) the dynamics of the hand closure, thereby providing a kinematic underpinning for the traditional transport-manipulation dissociation in the grasping and catching literature.

  16. Projectile stopping system

    DOEpatents

    Karr, T.J.; Pittenger, L.C.

    1996-11-26

    A projectile interceptor launches a projectile catcher into the path of a projectile. In one embodiment, signals indicative of the path of a projectile are received by the projectile interceptor. A flinger mechanism has a projectile catcher releasably attached thereto, such that the projectile catcher can be released and launched from the flinger mechanism. A controller connected to the flinger mechanism uses the signals indicative of the path of the projectile to determine the launch parameters of the projectile catcher. The controller directs the flinger mechanism to release the projectile catcher such that the projectile catcher is launched into the path of the projectile and intercepts the projectile. 13 figs.

  17. Developing Confident Softball Catchers

    ERIC Educational Resources Information Center

    Kellers, Peggy

    2004-01-01

    Training softball catchers is challenging. The nature of the position makes it one of the most difficult to play because of the breadth of a catcher's responsibilities. Although the demands on a pitcher or other players are significant, their roles are less complex than the catcher's, who is actively involved in the game at many different levels…

  18. The capture of lunar materials in low lunar orbit

    NASA Technical Reports Server (NTRS)

    Floyd, M. A.

    1981-01-01

    A scenario is presented for the retrieval of lunar materials sent into lunar orbit to be used as raw materials in space manufacturing operations. The proposal is based on the launch of material from the lunar surface by an electromagnetic mass driver and the capture of this material in low lunar orbit by a fleet of mass catchers which ferry the material to processing facilities when full. Material trajectories are analyzed using the two-body equations of motion, and intercept requirements and the sensitivity of the system to launch errors are determined. The present scenario is shown to be superior to scenarios that place a single mass catcher at the L2 libration point due to increased operations flexibility, decreased mass driver performance requirements and centralized catcher servicing.

  19. 75 FR 39892 - Fisheries of the Exclusive Economic Zone Off Alaska; Community Development Quota Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-13

    ... Fisheries Act (AFA) trawl catcher/processor sector (otherwise known as the Amendment 80 sector... catcher/processors. Hook-and-line catcher/processors are allocated 48.7 percent of the annual BSAI Pacific... harvest of Pacific cod by hook-and-line catcher/processors, although this is one of the major groundfish...

  20. 77 FR 72791 - Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea and Aleutian Islands; 2013 and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-06

    ... as follows: 50 percent to the inshore sector, 40 percent to the catcher/ processor sector, and 10... of the pollock allocated to the catcher/processor sector will be available for harvest by AFA catcher vessels with catcher/ processor sector endorsements, unless the Regional Administrator receives a...

  1. 76 FR 22057 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... catcher vessels using trawl gear in the Bering Sea and Aleutian Islands Management Area (BSAI). This... Pacific cod allocated to catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska...

  2. 76 FR 20891 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... catcher vessels using trawl gear in the Bering Sea and Aleutian Islands Management Area (BSAI). This... Pacific cod allocated to catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska...

  3. 78 FR 74063 - Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea and Aleutian Islands; 2014 and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-10

    ...; catcher/ processor--40 percent; and motherships--10 percent. Under Sec. 679.20(a)(5)(iii)(B)(2)(i) and (ii... sector, 40 percent to the catcher/processor sector, and 10 percent to the mothership sector. In the.../processor sector will be available for harvest by AFA catcher vessels with catcher/ processor sector...

  4. Calibration of the MDCO dust collector and of four versions of the inverted frisbee dust deposition sampler

    NASA Astrophysics Data System (ADS)

    Sow, Mamadou; Goossens, Dirk; Rajot, Jean Louis

    2006-12-01

    Wind tunnel experiments were conducted to determine the efficiency of sediment samplers designed to measure the deposition of aeolian dust. Efficiency was ascertained relative to a water surface, which was considered the best alternative for simulating a perfectly absorbent surface. Two types of samplers were studied: the Marble Dust Collector (MDCO) and the inverted frisbee sampler. Four versions of the latter catcher were tested: an empty frisbee, an empty frisbee surrounded by an aerodynamic flow deflector ring, a frisbee filled with glass marbles, and a frisbee filled with glass marbles and surrounded by a flow deflector ring. Efficiency was ascertained for five wind velocities (range: 1-5 m s - 1 ) and eight grain size classes (range: 10-89 μm). The efficiency of dust deposition catchers diminishes rapidly as the wind speed increases. It also diminishes as the particles caught become coarser. Adding a flow deflector ring to a catcher substantially improves the catcher's efficiency, by up to 100% in some cases. The addition of glass marbles to a catcher, on the other hand, does not seem to increase the efficiency, at least not at wind velocities inferior to the deflation threshold. For higher velocities the marbles protect the settled particles from resuspension, keeping them in the catcher. The following five parameters determine the accumulation of aeolian dust in a catcher: the horizontal dust flux, the weight of the particles, atmospheric turbulence, resuspension, and the dust shadow effect created by the catcher. The final accumulation flux depends on the combination of these parameters. The catchers tested in this study belong to the best catchers currently in use in earth science and have been the subject of various aerodynamic studies to improve their efficiency. Nevertheless the catching efficiency remains low, in the order of 20-40% for wind speeds above 2 m s - 1 . Other catchers suffer from the same low efficiencies. There is, thus, evidence to believe that dust deposition rates published in the aeolian literature and obtained by collecting the sediment in a catcher largely underestimate the true deposition. The errors are considerable, of the order of 100% and more. A reconsideration of the literature data on aeolian dust deposition measured by catchers is, therefore, required.

  5. 75 FR 52478 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-26

    ... trawl catcher vessels to catcher vessels less than 60 feet (18.3 meters) length overall (LOA) using hook... cod from the C season trawl catcher vessel apportionment to catcher vessels less than 60 feet (18.3... vessels less than 60 feet (18.3 m) LOA using hook-and-line or pot gear. Classification This action...

  6. 77 FR 72243 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-05

    ... greater than or equal to 60 feet length overall (LOA) using pot gear to hook-and-line catcher/processors, pot catcher/processors, and catcher vessels less than 60 feet LOA using hook-and-line or pot gear in... total allowable catch (TAC) specified for catcher vessels greater than or equal to 60 feet length...

  7. Descriptive analysis of kinematics and kinetics of catchers throwing to second base from their knees.

    PubMed

    Plummer, Hillary A; Oliver, Gretchen D

    2016-08-01

    In order to decrease the amount of time that it takes the catcher to throw the ball, a catcher may chose to throw from the knees. Upper extremity kinematics may play a significant role in the kinetics about the elbow observed in catchers throwing from the knees. If relationships between kinematics and kinetics exist then the development of training and coaching instruction may help in reduced upper extremity injury risk. Twenty-two baseball and softball catchers (14.36±3.86years; 165.11±17.54cm; 65.67±20.60kg) volunteered. The catchers exhibited a less trunk rotation (5.6±16.2°), greater elbow flexion (87.9±21.4°) and decreased humeral elevation (71.1±12.3°) at the event of maximum shoulder external rotation as compared to what has previously reported in catchers. These variables are important, as they have previously been established as potential injury risk factors in pitchers, however it is not yet clear the role these variables play in catchers' risk of injury. A positive relationship between elbow varus torque during the deceleration phase and elbow flexion at MIR was observed (r=0.609; p=0.003). Throwing from the knees reduces a catcher's ability to utilize the proximal kinetic chain and this may help to explain why their kinematics and kinetics differ from what has previously been presented in the literature. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. 78 FR 5144 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-24

    ... Catcher Vessels Greater Than or Equal To 60 Feet (18.3 Meters) Length Overall Using Pot Gear in the Bering... prohibiting directed fishing for Pacific cod by pot catcher vessels greater than or equal to 60 feet (18.3... allowable catch (TAC) specified for pot catcher vessels greater than or equal to 60 feet (18.3 m) LOA in the...

  9. 75 FR 72735 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-26

    ... Catcher Vessels Less Than 60 Feet (18.3 m) Length Overall Using Hook-and-Line or Pot Gear in the Bering.... SUMMARY: NMFS is prohibiting directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 m... allocated to catcher vessels less than 60 feet LOA using hook-and-line or pot gear in the BSAI. DATES...

  10. 77 FR 10400 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... Catcher Vessels Less Than 60 Feet (18.3 Meters) Length Overall Using Hook-and-Line or Pot Gear in the...: NMFS is prohibiting directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 meters... catch (TAC) specified for catcher vessels less than 60 feet (18.3 m) LOA using hook-and-line or pot gear...

  11. 78 FR 9328 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-08

    ... Catcher Vessels Less Than 60 Feet (18.3 Meters) Length Overall Using Hook-and-Line or Pot Gear in the...: NMFS is prohibiting directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 meters... catch (TAC) specified for catcher vessels less than 60 feet (18.3 m) LOA using hook-and-line or pot gear...

  12. 77 FR 3157 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-23

    ... Catcher Vessels Greater Than or Equal To 60 Feet (18.3 Meters) Length Overall Using Pot Gear in the Bering... prohibiting directed fishing for Pacific cod by pot catcher vessels greater than or equal to 60 feet (18.3... allowable catch (TAC) specified for pot catcher vessels greater than or equal to 60 feet (18.3 m) LOA in the...

  13. 76 FR 4081 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-24

    ... Catcher Vessels Greater Than or Equal to 60 Feet (18.3 Meters) Length Overall Using Pot Gear in the Bering... prohibiting directed fishing for Pacific cod by pot catcher vessels greater than or equal to 60 feet (18.3... catch (TAC) specified for pot catcher vessels greater than or equal to 60 feet (18.3 m) LOA in the BSAI...

  14. 3-D jobs and health disparities: The health implications of Latino chicken catchers' working conditions.

    PubMed

    Quandt, Sara A; Arcury-Quandt, Alice E; Lawlor, Emma J; Carrillo, Lourdes; Marín, Antonio J; Grzywacz, Joseph G; Arcury, Thomas A

    2013-02-01

    This study uses qualitative data to describe the tasks performed by chicken catchers, their organization of work, and possible health and safety hazards encountered. Twenty-one Latino immigrant chicken catchers for North Carolina poultry-processing plants were interviewed to obtain their perceptions of the job and its hazards. Interviews were recorded and transcribed (n = 10) or detailed notes recorded (n = 11). Transcripts and notes were subjected to qualitative analysis. Chicken catching takes place in a highly contaminated and hazardous work environment. The fast pace of work, low level of control over work intensity, and piece rate compensation all result in high potential for work-related injury and illness, including trauma, electrical shock, respiratory effects, musculoskeletal injuries, and drug use. Workers receive little safety or job training. Chicken catching is characterized by a work environment and organization of work that promote injury and illness. Copyright © 2012 Wiley Periodicals, Inc.

  15. Dual Plug-and-Display Synthetic Assembly Using Orthogonal Reactive Proteins for Twin Antigen Immunization.

    PubMed

    Brune, Karl D; Buldun, Can M; Li, Yuanyuan; Taylor, Iona J; Brod, Florian; Biswas, Sumi; Howarth, Mark

    2017-05-17

    Engineering modular platforms to control biomolecular architecture can advance both the understanding and the manipulation of biological systems. Icosahedral particles uniformly displaying single antigens stimulate potent immune activation and have been successful in various licensed vaccines. However, it remains challenging to display multiple antigens on a single particle and to induce broader immunity protective across strains or even against distinct diseases. Here, we design a dually addressable synthetic nanoparticle by engineering the multimerizing coiled-coil IMX313 and two orthogonally reactive split proteins. SpyCatcher protein forms an isopeptide bond with SpyTag peptide through spontaneous amidation. SnoopCatcher forms an isopeptide bond with SnoopTag peptide through transamidation. SpyCatcher-IMX-SnoopCatcher provides a modular platform, whereby SpyTag-antigen and SnoopTag-antigen can be multimerized on opposite faces of the particle simply upon mixing. We demonstrate efficient derivatization of the platform with model proteins and complex pathogen-derived antigens. SpyCatcher-IMX-SnoopCatcher was expressed in Escherichia coli and was resilient to lyophilization or extreme temperatures. For the next generation of malaria vaccines, blocking the transmission of the parasite from human to mosquito is an important goal. SpyCatcher-IMX-SnoopCatcher multimerization of the leading transmission-blocking antigens Pfs25 and Pfs28 greatly enhanced the antibody response to both antigens in comparison to the monomeric proteins. This dual plug-and-display architecture should help to accelerate vaccine development for malaria and other diseases.

  16. 76 FR 79764 - Requested Administrative Waiver of the Coastwise Trade Laws: Vessel DREAM CATCHER; Invitation for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-22

    ... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket No. MARAD-2011-0156] Requested Administrative Waiver of the Coastwise Trade Laws: Vessel DREAM CATCHER; Invitation for Public Comments AGENCY... DREAM CATCHER is: INTENDED COMMERCIAL USE OF VESSEL: ``Passenger charter.'' GEOGRAPHIC REGION: ``Georgia...

  17. 76 FR 13098 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-10

    ... Catcher Vessels Less Than 60 Feet (18.3 m) Length Overall Using Hook-and-Line or Pot Gear in the Bering... prohibiting directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 m) length overall (LOA...

  18. Vascular changes of the hand in professional baseball players with emphasis on digital ischemia in catchers.

    PubMed

    Ginn, T Adam; Smith, Adam M; Snyder, Jon R; Koman, L Andrew; Smith, Beth P; Rushing, Julia

    2005-07-01

    Repetitive trauma to the hand is a concern for baseball players. The present study investigated the effects of repetitive trauma and the prevalence of microvascular pathological changes in the hands of minor league professional baseball players. In contrast to previous investigators, we documented the presence of abnormalities in younger, asymptomatic individuals. Thirty-six baseball players on active minor league rosters underwent a history and physical examination of both hands as well as additional specialized tests, including Doppler ultrasound, a timed Allen test, determination of digital brachial pressure indices, and ring sizing of fingers. Data were compared between gloved hands and throwing hands, hitters and nonhitters, and players at four different positions (catcher [nine subjects], outfielder [seven subjects], infielder [five subjects], and pitcher [fifteen subjects]). Digital brachial indices in the ring fingers of the gloved (p < 0.05) and throwing hands (p < 0.02) of catchers were significantly diminished compared with those in all other players. Doppler testing showed a significantly greater prevalence of abnormal flow in the ulnar artery at Guyon's canal when catchers were compared with other position players (p < 0.01). Doppler abnormalities were significantly more common in the gloved hand compared with the throwing hand (p < 0.05). Seven of nine catchers (and only catchers) were found to have index finger hypertrophy (average change, two ring sizes; p < 0.01); the hypertrophy occurred at the proximal phalanx and the proximal interphalangeal joint of the gloved hand. Catchers had a significantly higher prevalence of subjective hand symptoms (specifically, weakness in the gloved hand) compared with pitchers and infielders/outfielders (44% compared with 7% and 17%, respectively; p < 0.05). Microvascular changes are present in the hands of otherwise healthy professional baseball players in all positions, with a significantly higher prevalence in catchers, prior to the development of clinically important ischemia. Repetitive trauma resulting from the impact of the baseball also leads to digital hypertrophy in the index finger of the gloved hand of catchers. Gloves currently used by professional catchers do not adequately protect the hand from repetitive trauma.

  19. Probing the potential of CnaB-type domains for the design of tag/catcher systems

    PubMed Central

    Pröschel, Marlene; Kraner, Max E.; Horn, Anselm H. C.; Schäfer, Lena; Sonnewald, Uwe

    2017-01-01

    Building proteins into larger, post-translational assemblies in a defined and stable way is still a challenging task. A promising approach relies on so-called tag/catcher systems that are fused to the proteins of interest and allow a durable linkage via covalent intermolecular bonds. Tags and catchers are generated by splitting protein domains that contain intramolecular isopeptide or ester bonds that form autocatalytically under physiological conditions. There are already numerous biotechnological and medical applications that demonstrate the usefulness of covalent linkages mediated by these systems. Additional covalent tag/catcher systems would allow creating more complex and ultra-stable protein architectures and networks. Two of the presently available tag/catcher systems were derived from closely related CnaB-domains of Streptococcus pyogenes and Streptococcus dysgalactiae proteins. However, it is unclear whether domain splitting is generally tolerated within the CnaB-family or only by a small subset of these domains. To address this point, we have selected a set of four CnaB domains of low sequence similarity and characterized the resulting tag/catcher systems by computational and experimental methods. Experimental testing for intermolecular isopeptide bond formation demonstrated two of the four systems to be functional. For these two systems length and sequence variations of the peptide tags were investigated revealing only a relatively small effect on the efficiency of the reaction. Our study suggests that splitting into tag and catcher moieties is tolerated by a significant portion of the naturally occurring CnaB-domains, thus providing a large reservoir for the design of novel tag/catcher systems. PMID:28654665

  20. Development of fast-release solid catchers for rare isotopes

    NASA Astrophysics Data System (ADS)

    Nolen, Jerry; Greene, John; Elam, Jeffrey; Mane, Anil; Sampathkumaran, Uma; Winter, Raymond; Hess, David; Mushfiq, Mohammad; Stracener, Daniel; Wiendenhoever, Ingo

    2015-04-01

    Porous solid catchers of rare isotopes are being developed for use at high power heavy ion accelerator facilities such as RIKEN, FRIB, and RISP. Compact solid catchers are complementary to helium gas catchers for parasitic harvesting of rare isotopes in the in-flight separators. They are useful for short lived isotopes for basic nuclear physics research and longer-lived isotopes for off-line applications. Solid catchers can operate effectively with high intensity secondary beams, e.g. >> 1E10 atoms/s with release times as short as 10-100 milliseconds. A new method using a very sensitive and efficient RGA has been commissioned off-line at Argonne and is currently being shipped to Florida State University for in-beam measurements of the release curves using stable beams. The same porous solid catcher technology is also being evaluated for use in targets for the production of medical isotopes such as 211-At. Research supported by the U.S. DOE Office of Nuclear Physics under the SBIR Program and Contract # DE-AC02-06CH11357 and a University of Chicago Comprehensive Cancer Center/ANL Pilot Project.

  1. SpyTag/SpyCatcher Cyclization Enhances the Thermostability of Firefly Luciferase

    PubMed Central

    Si, Meng; Xu, Qing

    2016-01-01

    SpyTag can spontaneously form a covalent isopeptide bond with its protein partner SpyCatcher. Firefly luciferase from Photinus pyralis was cyclized in vivo by fusing SpyCatcher at the N terminus and SpyTag at the C terminus. Circular LUC was more thermostable and alkali-tolerant than the wild type, without compromising the specific activity. Structural analysis indicated that the cyclized LUC increased the thermodynamic stability of the structure and remained more properly folded at high temperatures when compared with the wild type. We also prepared an N-terminally and C-terminally shortened form of the SpyCatcher protein and cyclization using this truncated form led to even more thermostability than the original form. Our findings suggest that cyclization with SpyTag and SpyCatcher is a promising and effective strategy to enhance thermostability of enzymes. PMID:27658030

  2. Field evaluation of a mechanical fly catcher in the control of houseflies.

    PubMed

    Tilak, R; Dutta Gupta, K K

    2007-01-01

    'Fly Catcher', an innovative herbal based mechanical trap was evaluated for its efficacy in reducing fly nuisance in and around messes operating in a large teaching establishment and the adjacent garbage dumps. It is recommended that the 'Fly Catcher' may be used as an adjunct to other routinely followed anti fly measures.

  3. 75 FR 38936 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    .... 0910131362-0087-02] RIN 0648-XX35 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels Participating in the Rockfish Entry Level Trawl Fishery in the Central Regulatory... directed fishing for Pacific ocean perch by trawl catcher vessels participating in the rockfish entry level...

  4. 76 FR 39790 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    .... 101126522-0640-02] RIN 0648-XA543 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels Participating in the Rockfish Entry Level Trawl Fishery in the Central Regulatory... directed fishing for Pacific ocean perch by trawl catcher vessels participating in the rockfish entry level...

  5. 77 FR 68106 - Second Fishing Capacity Reduction Program for the Longline Catcher Processor Subsector of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-15

    ... reduction contract is in full force and effect and NMFS is preparing to tender and disburse a reduction... license LLG2085 with area endorsements for Bering Sea Catcher/ Processor Hook and Longline and Aleutian Islands Catcher/Processor Hook and Longline. NMFS will tender the reduction payment on or about December...

  6. 75 FR 42337 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher/Processors...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-21

    .... 0910131362-0087-02] RIN 0648-XX71 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch... directed fishing for Pacific ocean perch by catcher/processors participating in the rockfish limited access... exceeding the 2010 total allowable catch (TAC) of Pacific ocean perch allocated to catcher/processors...

  7. 76 FR 43934 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher/Processors...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-22

    .... 101126522-0640-02] RIN 0648-XA587 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch... directed fishing for Pacific ocean perch by catcher/processors participating in the rockfish limited access... exceeding the 2011 total allowable catch (TAC) of Pacific ocean perch allocated to catcher/processors...

  8. 76 FR 18663 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-05

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... for catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska local time (A.l.t...

  9. 77 FR 23159 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-18

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... fishing for Pacific cod by catcher vessels using trawl gear in the BSAI. After the effective date of this...

  10. 78 FR 15643 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-12

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... catcher vessels using trawl gear in the BSAI. After the effective date of this closure the maximum...

  11. 50 CFR Figure 2 to Part 679 - BSAI Catcher Vessel Operational Area

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false BSAI Catcher Vessel Operational Area 2 Figure 2 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND... ALASKA Pt. 679, Fig. 2 Figure 2 to Part 679—BSAI Catcher Vessel Operational Area ER15NO99.001 [64 FR...

  12. Structural basis for a hand-like site in the calcium sensor CatchER with fast kinetics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Ying; Reddish, Florence; Tang, Shen

    2013-12-01

    High-resolution crystal structures of the designed calcium sensor CatchER revealed snapshots of calcium and gadolinium ions binding within the designed site in agreement with its fast kinetics. Calcium ions, which are important signaling molecules, can be detected in the endoplasmic reticulum by an engineered mutant of green fluorescent protein (GFP) designated CatchER with a fast off-rate. High resolution (1.78–1.20 Å) crystal structures were analyzed for CatchER in the apo form and in complexes with calcium or gadolinium to probe the binding site for metal ions. While CatchER exhibits a 1:1 binding stoichiometry in solution, two positions were observed for eachmore » of the metal ions bound within the hand-like site formed by the carboxylate side chains of the mutated residues S147E, S202D, Q204E, F223E and T225E that may be responsible for its fast kinetic properties. Comparison of the structures of CatchER, wild-type GFP and enhanced GFP confirmed that different conformations of Thr203 and Glu222 are associated with the two forms of Tyr66 of the chromophore which are responsible for the absorbance wavelengths of the different proteins. Calcium binding to CatchER may shift the equilibrium for conformational population of the Glu222 side chain and lead to further changes in its optical properties.« less

  13. 78 FR 17884 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-25

    ... Catcher Vessels Greater Than or Equal to 50 Feet (15.2 Meters) Length Overall Using Hook-and-Line Gear in...: NMFS is prohibiting directed fishing for Pacific cod by catcher vessels (CVs) greater than or equal to... of the 2013 Pacific cod total allowable catch apportioned to CVs greater than or equal to 50 feet (15...

  14. 76 FR 29671 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-23

    ... gear to catcher vessels less than 60 feet (18.3 meters) length overall using hook-and-line or pot gear... catcher vessel apportionment to catcher vessels less than 60 feet length overall (LOA) using hook-and-line... feet LOA using hook-and-line or pot gear. Classification This action responds to the best available...

  15. SpyTag/SpyCatcher cyclization confers resilience to boiling on a mesophilic enzyme.

    PubMed

    Schoene, Christopher; Fierer, Jacob O; Bennett, S Paul; Howarth, Mark

    2014-06-10

    SpyTag is a peptide that spontaneously forms an amide bond with its protein partner SpyCatcher. SpyTag was fused at the N terminus of β-lactamase and SpyCatcher at the C terminus so that the partners could react to lock together the termini of the enzyme. The wild-type enzyme aggregates above 37 °C, with irreversible loss of activity. Cyclized β-lactamase was soluble even after heating at 100 °C; after cooling, the catalytic activity was restored. SpyTag/SpyCatcher cyclization led to a much larger increase in stability than that achieved through point mutation or alternative approaches to cyclization. Cyclized dihydrofolate reductase was similarly resilient. Analyzing unfolding through calorimetry indicated that cyclization did not increase the unfolding temperature but rather facilitated refolding after thermal stress. SpyTag/SpyCatcher sandwiching represents a simple and efficient route to enzyme cyclization, with potential to greatly enhance the robustness of biocatalysts. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Engineering Protein Hydrogels Using SpyCatcher-SpyTag Chemistry.

    PubMed

    Gao, Xiaoye; Fang, Jie; Xue, Bin; Fu, Linglan; Li, Hongbin

    2016-09-12

    Constructing hydrogels from engineered proteins has attracted significant attention within the material sciences, owing to their myriad potential applications in biomedical engineering. Developing efficient methods to cross-link tailored protein building blocks into hydrogels with desirable mechanical, physical, and functional properties is of paramount importance. By making use of the recently developed SpyCatcher-SpyTag chemistry, we successfully engineered protein hydrogels on the basis of engineered tandem modular elastomeric proteins. Our resultant protein hydrogels are soft but stable, and show excellent biocompatibility. As the first step, we tested the use of these hydrogels as a drug carrier, as well as in encapsulating human lung fibroblast cells. Our results demonstrate the robustness of the SpyCatcher-SpyTag chemistry, even when the SpyTag (or SpyCatcher) is flanked by folded globular domains. These results demonstrate that SpyCatcher-SpyTag chemistry can be used to engineer protein hydrogels from tandem modular elastomeric proteins that can find applications in tissue engineering, in fundamental mechano-biological studies, and as a controlled drug release vehicle.

  17. 78 FR 53076 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-28

    ... gear and catcher vessels greater than 60 feet (18.3 meters) length overall (LOA) using hook-and-line gear to catcher vessels less than 60 feet (18.3 meters) LOA using hook-and-line or pot gear in the...)(iii)(A), NMFS apportions 2,500 mt of Pacific cod to catcher vessels less than 60 feet (18.3 meters(m...

  18. 78 FR 17885 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 50...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-25

    ... Catcher Vessels Less Than 50 Feet (15.2 Meters) Length Overall Using Hook-and-Line Gear in the Central... directed fishing for Pacific cod by catcher vessels (CVs) less than 50 feet (15.2 meters (m)) in length... catch apportioned to CVs less than 50 feet (15.2 m) LOA using hook-and-line gear in the Central...

  19. 78 FR 18896 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-28

    ... Catcher Vessels Less Than 60 feet (18.3 meters) Length Overall Using Jig or Hook-and-Line Gear in the... less than 60 feet (18.3 meters (m)) length overall (LOA) using jig or hook-and-line gear in the... action is necessary to prevent exceeding the limit of Pacific cod for catcher vessels less than 60 feet...

  20. 77 FR 53152 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-31

    ... gear, catcher vessels greater than 60 feet (18.3 meters) length overall (LOA) using hook-and-line gear, and catcher vessels using trawl gear to catcher vessels less than 60 feet (18.3 meters) LOA using hook... than 60 feet (18.3 meters(m)) LOA using hook-and- line or pot gear. The 2012 Pacific cod TAC specified...

  1. 75 FR 52478 - Fisheries of the Economic Exclusive Zone Off Alaska; Pacific Cod in the Bering Sea and Aleutian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-26

    ... is opening directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 meters) length... catcher vessels less than 60 feet (18.3 meters) LOA using hook-and-line or pot gear specified for the BSAI... 679. NMFS closed directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 meters...

  2. 75 FR 5251 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-02

    ... Vessels Greater Than or Equal to 60 Feet (18.3 Meters) Length Overall Using Pot Gear in the Bering Sea and... directed fishing for Pacific cod by pot catcher vessels greater than or equal to 60 feet (18.3 meters (m...) specified for pot catcher vessels greater than or equal to 60 feet (18.3 m) LOA in the BSAI. DATES...

  3. 75 FR 70614 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Greater Than...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-18

    ... Catcher Vessels Greater Than or Equal to 60 Feet (18.3 Meters) Length Overall Using Pot Gear in the Bering... to 60 feet (18.3 meters (m)) length overall (LOA) in the Bering Sea and Aleutian Islands management... (TAC) specified for pot catcher vessels greater than or equal to 60 feet (18.3 m) LOA in the BSAI...

  4. Non-Seismology Seismology: Using QuakeCatchers to Analyze the Frequency of Bridge Vibrations

    NASA Astrophysics Data System (ADS)

    Courtier, A. M.; Constantin, C.; Wilson, C. F.

    2013-12-01

    We conducted an experiment to test the feasibility of measuring seismic waves generated by traffic near James Madison University. We used QuakeCatcher seismometers (originally designed for passive seismic measurement) to measure vibrations associated with traffic on a wooden bridge as well as a nearby concrete bridge. This experiment was a signal processing exercise for a student research project and did not draw any conclusions regarding bridge safety or security. The experiment consisted of two temporary measurement stations comprised of a laptop computer and a QuakeCatcher - a small seismometer that plugs directly into the laptop via a USB cable. The QuakeCatcher was taped to the ground at the edge of the bridge to achieve good coupling, and vibrational events were triggered repeatedly with a control vehicle to accumulate a consistent dataset of the bridge response. For the wooden bridge, the resulting 'seismograms' were converted to Seismic Analysis Code (SAC) format and analyzed in MATLAB. The concrete bridge did not generate vibrations significant enough to trigger the recording mechanism on the QuakeCatchers. We will present an overview of the experimental design and frequency content of the traffic patterns, as well as a discussion of the instructional benefits of using the QuakeCatcher sensors in this non-traditional setting.

  5. 77 FR 16949 - Pacific Cod by Catcher Vessels Greater Than or Equal to 50 Feet (15.2 Meters) Length Overall...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-23

    .... 111207737-2141-02] RIN 0648-XB112 Pacific Cod by Catcher Vessels Greater Than or Equal to 50 Feet (15.2... catcher vessels (CVs) greater than or equal to 50 feet (15.2 meters (m)) in length overall (LOA) using... to CVs greater than or equal to 50 feet (15.2 m) LOA using hook-and-line gear in the Central...

  6. 77 FR 8176 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... gear to catcher vessels less than 60 feet (18.3 meters) length overall using hook-and-line or pot gear... apportionment to catcher vessels less than 60 feet (18.3 meters(m)) length overall (LOA) using hook-and-line or... and 6,445 mt to catcher vessels less than 60 feet (18.3 m) LOA using hook-and-line or pot gear...

  7. 76 FR 54137 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-31

    ... using trawl gear and catcher vessels greater than or equal to 60 feet (18.3 meters (m)) length overall (LOA) using hook-and-line gear to catcher vessels less than 60 feet (18.3 m) LOA using hook-and-line or... catcher vessels less than 60 feet (18.3 m) LOA using hook-and-line or pot gear. The 2011 Pacific cod total...

  8. 50 CFR Table 9 to Part 679 - Groundfish LLP Licenses Eligible for Use in the BSAI Longline Catcher/Processor Subsector, Column...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... in the BSAI Longline Catcher/Processor Subsector, Column A. X Indicates Whether Column B or Column C... the BSAI Longline Catcher/Processor Subsector, Column A. X Indicates Whether Column B or Column C...)(D)(2) LLG 4508 X LLG 1785 X LLG 3681 X LLG 3676 X LLG 3609 X LLG 1400 X LLG 1401 X LLG 3617 X LLG...

  9. 50 CFR Table 47a to Part 679 - Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used To Calculate the Opt-out Allocation and Annual Threshold Amount, and Percent Used To Calculate IPA Minimum Participation Assigned to Each Catcher/Processor Under § 679.21(f) 47a Table 47a to...

  10. Comparison of bulk and pitcher-catcher targets for laser-driven neutron production

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Willingale, L.; Maksimchuk, A.; Joglekar, A. S.

    2011-08-15

    Laser-driven d(d, n)-{sup 3}He beam-target fusion neutron production from bulk deuterated plastic (CD) targets is compared with a pitcher-catcher target scheme using an identical laser and detector arrangement. For laser intensities in the range of (1-3) x 10{sup 19} W cm{sup -2}, it was found that the bulk targets produced a high yield (5 x 10{sup 4} neutrons per steradian) beamed preferentially in the laser propagation direction. Numerical modeling shows the importance of considering the temperature adjusted stopping powers to correctly model the neutron production. The bulk CD targets have a high background target temperature leading to a reduced stoppingmore » power for the deuterons, which increases the probability of generating neutrons by fusion. Neutron production from the pitcher-catcher targets was not as efficient since it does not benefit from the reduced stopping power in the cold catcher target. Also, the inhibition of the deuteron acceleration by a proton rich contamination layer significantly reduces the pitcher-catcher neutron production.« less

  11. "Catch 22": Biosecurity awareness, interpretation and practice amongst poultry catchers.

    PubMed

    Millman, Caroline; Christley, Rob; Rigby, Dan; Dennis, Diana; O'Brien, Sarah J; Williams, Nicola

    2017-06-01

    Campylobacter contamination of chicken on sale in the UK remains at high levels and has a substantial public health impact. This has prompted the application of many interventions in the supply chain, including enhanced biosecurity measures on-farm. Catching and thinning are acknowledged as threats to the maintenance of good biosecurity, yet the people employed to undertake this critical work (i.e. 'catchers') are a rarely studied group. This study uses a mixed methods approach to investigate catchers' (n=53) understanding of the biosecurity threats posed by the catching and thinning, and the barriers to good biosecurity practice. It interrogated the role of training in both the awareness and practice of good biosecurity. Awareness of lapses in biosecurity was assessed using a Watch-&-Click hazard awareness survey (n=53). Qualitative interviews (n=49 catchers, 5 farm managers) explored the understanding, experience and practice of catching and biosecurity. All of the catchers who took part in the Watch-&-Click study identified at least one of the biosecurity threats with 40% detecting all of the hazards. Those who had undergone training were significantly more likely to identify specific biosecurity threats and have a higher awareness score overall (48% compared to 9%, p=0.03). Crucially, the individual and group interviews revealed the tensions between the high levels of biosecurity awareness evident from the survey and the reality of the routine practice of catching and thinning. Time pressures and a lack of equipment rather than a lack of knowledge appear a more fundamental cause of catcher-related biosecurity lapses. Our results reveal that catchers find themselves in a 'catch-22' situation in which mutually conflicting circumstances prevent simultaneous completion of their job and compliance with biosecurity standards. 3 Hence, although education about, and enforcement of, biosecurity protocols has been recommended, our findings suggest that further reforms, including changing the context in which catching occurs by improving the equipment and other resources available to catchers and providing more time for biosecurity, will be essential for successful implementation of existing biosecurity protocols. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  12. Mental Skills Training Experience of NCAA Division II Softball Catchers

    ERIC Educational Resources Information Center

    Norman, Shannon

    2012-01-01

    Athletes competing at all levels of sport are constantly working on ways to enhance their physical performance. Sport psychology research insists there are higher performance results among athletes who incorporate mental skills training into their practice and competition settings. In order to use the mental skills strategies effectively, athletes…

  13. Utilization of fluorescent microspheres and a green fluorescent protein-marked strain for assessment of microbiological contamination of permafrost and ground ice core samples from the Canadian High Arctic.

    PubMed

    Juck, D F; Whissell, G; Steven, B; Pollard, W; McKay, C P; Greer, C W; Whyte, L G

    2005-02-01

    Fluorescent microspheres were applied in a novel fashion during subsurface drilling of permafrost and ground ice in the Canadian High Arctic to monitor the exogenous microbiological contamination of core samples obtained during the drilling process. Prior to each drill run, a concentrated fluorescent microsphere (0.5-microm diameter) solution was applied to the interior surfaces of the drill bit, core catcher, and core tube and allowed to dry. Macroscopic examination in the field demonstrated reliable transfer of the microspheres to core samples, while detailed microscopic examination revealed penetration levels of less than 1 cm from the core exterior. To monitor for microbial contamination during downstream processing of the permafrost and ground ice cores, a Pseudomonas strain expressing the green fluorescent protein (GFP) was painted on the core exterior prior to processing. Contamination of the processed core interiors with the GFP-expressing strain was not detected by culturing the samples or by PCR to detect the gfp marker gene. These methodologies were quick, were easy to apply, and should help to monitor the exogenous microbiological contamination of pristine permafrost and ground ice samples for downstream culture-dependent and culture-independent microbial analyses.

  14. Utilization of Fluorescent Microspheres and a Green Fluorescent Protein-Marked Strain for Assessment of Microbiological Contamination of Permafrost and Ground Ice Core Samples from the Canadian High Arctic

    PubMed Central

    Juck, D. F.; Whissell, G.; Steven, B.; Pollard, W.; McKay, C. P.; Greer, C. W.; Whyte, L. G.

    2005-01-01

    Fluorescent microspheres were applied in a novel fashion during subsurface drilling of permafrost and ground ice in the Canadian High Arctic to monitor the exogenous microbiological contamination of core samples obtained during the drilling process. Prior to each drill run, a concentrated fluorescent microsphere (0.5-μm diameter) solution was applied to the interior surfaces of the drill bit, core catcher, and core tube and allowed to dry. Macroscopic examination in the field demonstrated reliable transfer of the microspheres to core samples, while detailed microscopic examination revealed penetration levels of less than 1 cm from the core exterior. To monitor for microbial contamination during downstream processing of the permafrost and ground ice cores, a Pseudomonas strain expressing the green fluorescent protein (GFP) was painted on the core exterior prior to processing. Contamination of the processed core interiors with the GFP-expressing strain was not detected by culturing the samples or by PCR to detect the gfp marker gene. These methodologies were quick, were easy to apply, and should help to monitor the exogenous microbiological contamination of pristine permafrost and ground ice samples for downstream culture-dependent and culture-independent microbial analyses. PMID:15691963

  15. 50 CFR 679.5 - Recordkeeping and reporting (R&R).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... CV trw CP lgl/pot CP trw MS Submit to ... Time limit (1) White X X X X X Must retain, permanently...: CP = catcher/processor; CV = catcher vessel; lgl = longline; trw = trawl; MS = mothership. (2...

  16. 50 CFR 679.5 - Recordkeeping and reporting (R&R).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... CV trw CP lgl/pot CP trw MS Submit to ... Time limit (1) White X X X X X Must retain, permanently...: CP = catcher/processor; CV = catcher vessel; lgl = longline; trw = trawl; MS = mothership. (2...

  17. Analysis of the ability of catcher's masks to attenuate head accelerations on impact with a baseball.

    PubMed

    Shain, Kellen S; Madigan, Michael L; Rowson, Steven; Bisplinghoff, Jill; Duma, Stefan M

    2010-11-01

    The goals of this study were to measure the ability of catcher's masks to attenuate head accelerations on impact with a baseball and to compare these head accelerations to established injury thresholds for mild traumatic brain injury. Testing involved using a pneumatic cannon to shoot baseballs at an instrumented Hybrid III headform (a 50th percentile male head and neck) with and without a catcher's mask on the head. The ball speed was controlled from approximately 26.8 to 35.8 m/s (60-80 mph), and the regulation National Collegiate Athletic Association baseballs were used. Research laboratory. None. Catcher's masks and impact velocity. The linear and angular head accelerations of the Hybrid III headform. Peak linear resultant acceleration was 140 to 180 g without a mask and 16 to 30 g with a mask over the range of ball's speed investigated. Peak angular resultant acceleration was 19 500 to 25 700 rad/s without a mask and 2250 to 3230 rad/s with a mask. The Head Injury Criterion was 93 to 181 without a mask and 3 to 13 with a mask, and the Severity Index was 110 to 210 without a mask and 3 to 15 with a mask. Catcher's masks reduced head acceleration metrics by approximately 85%. Head acceleration metrics with a catcher's mask were significantly lower than contemporary injury thresholds, yet reports in the mass media clearly indicate that baseball impacts to the mask still occasionally result in mild traumatic brain injuries. Further research is needed to address this apparent contradiction.

  18. How to pitch a brilliant idea.

    PubMed

    Elsbach, Kimberly D

    2003-09-01

    Coming up with creative ideas is easy; selling them to strangers is hard. Entrepreneurs, sales executives, and marketing managers often go to great lengths to demonstrate how their new concepts are practical and profitable--only to be rejected by corporate decision makers who don't seem to understand the value of the ideas. Why does this happen? Having studied Hollywood executives who assess screenplay pitches, the author says the person on the receiving end--the "catcher"--tends to gauge the pitcher's creativity as well as the proposal itself. An impression of the pitcher's ability to come up with workable ideas can quickly and permanently overshadow the catcher's feelings about an idea's worth. To determine whether these observations apply to business settings beyond Hollywood, the author attended product design, marketing, and venture-capital pitch sessions and conducted interviews with executives responsible for judging new ideas. The results in those environments were similar to her observations in Hollywood, she says. Catchers subconsciously categorize successful pitchers as showrunners (smooth and professional), artists (quirky and unpolished), or neophytes (inexperienced and naive). The research also reveals that catchers tend to respond well when they believe they are participating in an idea's development. As Oscar-winning writer, director, and producer Oliver Stone puts it, screen-writers pitching an idea should "pull back and project what he needs onto your idea in order to make the story whole for him." To become a successful pitcher, portray yourself as one of the three creative types and engage your catchers in the creative process. By finding ways to give your catchers a chance to shine, you sell yourself as a likable collaborator.

  19. 50 CFR 679.5 - Recordkeeping and reporting (R&R).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ... Logsheets found in these logbooks CV lgl/pot CV trw CP lgl/pot CP trw MS Submit to ... Time limit (1) White... vessel's catch is off-loaded Note: CP = catcher/processor; CV = catcher vessel; lgl = longline; trw...

  20. 50 CFR 679.5 - Recordkeeping and reporting (R&R).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ... Logsheets found in these logbooks CV lgl/pot CV trw CP lgl/pot CP trw MS Submit to ... Time limit (1) White... vessel's catch is off-loaded Note: CP = catcher/processor; CV = catcher vessel; lgl = longline; trw...

  1. 50 CFR 679.5 - Recordkeeping and reporting (R&R).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ... Logsheets found in these logbooks CV lgl/pot CV trw CP lgl/pot CP trw MS Submit to ... Time limit (1) White... vessel's catch is off-loaded Note: CP = catcher/processor; CV = catcher vessel; lgl = longline; trw...

  2. Community Air Monitoring for Pesticide Drift Using Pesticide Action Network's (PAN) Drift Catcher

    NASA Astrophysics Data System (ADS)

    Marquez, E.

    2016-12-01

    Community air monitoring projects for pesticides in the air have been conducted by PAN in collaboration with community members and locally based groups engaged around pesticide issues. PAN is part of an international network working to promote a just, thriving food system and replace the use of hazardous pesticides with ecologically sound alternatives. The Drift Catcher is an air-monitoring device with a design based on the California Air Resource Board's air monitoring equipment, and has been used in community-based projects in 11 states. Observations of pesticide drift made by community members cannot always be confirmed by regulatory agencies—if an inspection is made hours or days after a drift incident, the evidence may no longer be present. The Drift Catcher makes it possible to collect scientific evidence of pesticide drift in areas where people live, work, and play. One of the most recent Drift Catcher projects was done in California, in partnership with the Safe Strawberry Coalition and led by the statewide coalition Californians for Pesticide Reform. The data were used to support a call for stronger mitigation rules for the fumigant chloropicrin and to support a campaign asking for stronger pesticide rules to protect children attending school in close proximity to agricultural fields. The Drift Catcher data are used by organizers and community members to engage policymakers with the intention of making policy change on a local and/or statewide level. On the national level, PAN's Drift Catcher data has helped win regulatory recognition of volatilization drift for pesticides other than fumigants. Lessons learned from conducting community-based research projects will also be discussed. PAN is also currently assessing other community-based monitoring tools, such as community surveys and drift questionnaires that may allow communities to collect data that can also support the campaign work.

  3. 50 CFR Table 40 to Part 679 - BSAI Halibut PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 40 Table 40 to Part 679—BSAI Halibut PSC...

  4. 50 CFR 680.44 - Cost recovery.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... value determined for at-sea Catcher/Processors (CP), depending on their activity. Ex-vessel value...-vessel value—(i) General. Catcher/processors must use the corresponding CP standard price(s) for the purposes of calculating fee liability. (ii) CP standard prices. As part of the summary described in...

  5. 50 CFR 680.44 - Cost recovery.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... value determined for at-sea Catcher/Processors (CP), depending on their activity. Ex-vessel value...-vessel value—(i) General. Catcher/processors must use the corresponding CP standard price(s) for the purposes of calculating fee liability. (ii) CP standard prices. As part of the summary described in...

  6. 50 CFR 680.44 - Cost recovery.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... value determined for at-sea Catcher/Processors (CP), depending on their activity. Ex-vessel value...-vessel value—(i) General. Catcher/processors must use the corresponding CP standard price(s) for the purposes of calculating fee liability. (ii) CP standard prices. As part of the summary described in...

  7. 50 CFR 680.44 - Cost recovery.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... value determined for at-sea Catcher/Processors (CP), depending on their activity. Ex-vessel value...-vessel value—(i) General. Catcher/processors must use the corresponding CP standard price(s) for the purposes of calculating fee liability. (ii) CP standard prices. As part of the summary described in...

  8. 50 CFR 680.44 - Cost recovery.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... value determined for at-sea Catcher/Processors (CP), depending on their activity. Ex-vessel value...-vessel value—(i) General. Catcher/processors must use the corresponding CP standard price(s) for the purposes of calculating fee liability. (ii) CP standard prices. As part of the summary described in...

  9. Slug sizing/slug volume prediction, state of the art review and simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burke, N.E.; Kashou, S.F.

    1995-12-01

    Slug flow is a flow pattern commonly encountered in offshore multiphase flowlines. It is characterized by an alternate flow of liquid slugs and gas pockets, resulting in an unsteady hydrodynamic behavior. All important design variables, such as slug length and slug frequency, liquid holdup, and pressure drop, vary with time and this makes the prediction of slug flow characteristics both difficult and challenging. This paper reviews the state of the art methods in slug catcher sizing and slug volume predictions. In addition, history matching of measured slug flow data is performed using the OLGA transient simulator. This paper reviews themore » design factors that impact slug catcher sizing during steady state, during transient, during pigging, and during operations under a process control system. The slug tracking option of the OLGA simulator is applied to predict the slug length and the slug volume during a field operation. This paper will also comment on the performance of common empirical slug prediction correlations.« less

  10. Slug-sizing/slug-volume prediction: State of the art review and simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burke, N.E.; Kashou, S.F.

    1996-08-01

    Slug flow is a flow pattern commonly encountered in offshore multiphase flowlines. It is characterized by an alternate flow of liquid slugs and gas pockets, resulting in an unsteady hydrodynamic behavior. All important design variables, such as slug length and slug frequency, liquid holdup, and pressure drop, vary with time and this makes the prediction of slug flow characteristics both difficult and challenging. This paper reviews the state of the art methods in slug-catcher sizing and slug-volume predictions. In addition, history matching of measured slug flow data is performed using the OLGA transient simulator. This paper reviews the design factorsmore » that impact slug-catcher sizing during steady state, during transient, during pigging, and during operations under a process-control system. The slug-tracking option of the simulator is applied to predict the slug length and the slug volume during a field operation. This paper will also comment on the performance of common empirical slug-prediction correlations.« less

  11. 76 FR 20626 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-13

    ... communities and monitors the ``economic stability for harvesters, processors, and coastal communities.'' The... (BSAI) Crab Economic Data Reports. OMB Control Number: 0648-0518. Form Number(s): NA. Type of Request...: 132. Average Hours per Response: Catcher vessel and catcher/processor economic data reports (EDRs), 37...

  12. 50 CFR Table 41 to Part 679 - BSAI Crab PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED... . . . Red king crab Zone 1 0.007 0.299 The PSC amount in number of animals available to trawl vessels in the...

  13. 50 CFR Table 41 to Part 679 - BSAI Crab PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED... . . . Red king crab Zone 1 0.007 0.299 The PSC amount in number of animals available to trawl vessels in the...

  14. 50 CFR Table 41 to Part 679 - BSAI Crab PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED... . . . Red king crab Zone 1 0.007 0.299 The PSC amount in number of animals available to trawl vessels in the...

  15. 50 CFR Table 41 to Part 679 - BSAI Crab PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED... . . . Red king crab Zone 1 0.007 0.299 The PSC amount in number of animals available to trawl vessels in the...

  16. 50 CFR Table 41 to Part 679 - BSAI Crab PSC Sideboard Limits for AFA Catcher/Processors and AFA Catcher Vessels

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED... . . . Red king crab Zone 1 0.007 0.299 The PSC amount in number of animals available to trawl vessels in the...

  17. 50 CFR 679.51 - Observer requirements for vessels and plants.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... sampling, data recording, and data communication duties per paragraph (a)(2) of this section may not exceed...) AI directed pollock fishery catcher/processors and motherships. A catcher/processor participating in the AI directed pollock fishery or a mothership processing pollock harvested in the AI directed...

  18. The Quake-Catcher Network: An Innovative Community-Based Seismic Network

    NASA Astrophysics Data System (ADS)

    Saltzman, J.; Cochran, E. S.; Lawrence, J. F.; Christensen, C. M.

    2009-12-01

    The Quake-Catcher Network (QCN) is a volunteer computing seismic network that engages citizen scientists, teachers, and museums to participate in the detection of earthquakes. In less than two years, the network has grown to over 1000 participants globally and continues to expand. QCN utilizes Micro-Electro-Mechanical System (MEMS) accelerometers, in laptops and external to desktop computers, to detect moderate to large earthquakes. One goal of the network is to involve K-12 classrooms and museums by providing sensors and software to introduce participants to seismology and community-based scientific data collection. The Quake-Catcher Network provides a unique opportunity to engage participants directly in the scientific process, through hands-on activities that link activities and outcomes to their daily lives. Partnerships with teachers and museum staff are critical to growth of the Quake Catcher Network. Each participating institution receives a MEMS accelerometer to connect, via USB, to a computer that can be used for hands-on activities and to record earthquakes through a distributed computing system. We developed interactive software (QCNLive) that allows participants to view sensor readings in real time. Participants can also record earthquakes and download earthquake data that was collected by their sensor or other QCN sensors. The Quake-Catcher Network combines research and outreach to improve seismic networks and increase awareness and participation in science-based research in K-12 schools.

  19. Chimera: a Bioconductor package for secondary analysis of fusion products.

    PubMed

    Beccuti, Marco; Carrara, Matteo; Cordero, Francesca; Lazzarato, Fulvio; Donatelli, Susanna; Nadalin, Francesca; Policriti, Alberto; Calogero, Raffaele A

    2014-12-15

    Chimera is a Bioconductor package that organizes, annotates, analyses and validates fusions reported by different fusion detection tools; current implementation can deal with output from bellerophontes, chimeraScan, deFuse, fusionCatcher, FusionFinder, FusionHunter, FusionMap, mapSplice, Rsubread, tophat-fusion and STAR. The core of Chimera is a fusion data structure that can store fusion events detected with any of the aforementioned tools. Fusions are then easily manipulated with standard R functions or through the set of functionalities specifically developed in Chimera with the aim of supporting the user in managing fusions and discriminating false-positive results. © The Author 2014. Published by Oxford University Press.

  20. Hypoeutectic melting in the UO2-x-Gd2O3 system

    NASA Astrophysics Data System (ADS)

    Journeau, Christophe; Fouquart, Pascal; Domenger, Renaud; Allegri, Patrick

    2017-05-01

    Gadolinium is one of the best neutron absorber materials and its use can be considered as a sacrificial material in a Sodium Fast Reactor core catcher in view of preventing recriticallity. A series of experiments have been conducted in the VITI induction-heated facility to study the melting in the UO2-x-Gd2O3 system with 60-87 mol% gadolinia. These experiments have indicated that the eutectic composition is around 92 mol% Gd2O3 - 8 mol% UO2-x and that the liquidus line is close to that of Popov et al. [Atom. Energ. 110 (2011) pp. 221-229] phase diagram.

  1. 50 CFR 679.51 - Observer requirements for vessels and plants.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... to complete sampling, data recording, and data communication duties per paragraph (a)(2) of this... paragraph (a)(2)(ii) of this section apply. (4) AI directed pollock fishery catcher/processors and motherships. A catcher/processor participating in the AI directed pollock fishery or a mothership processing...

  2. 50 CFR 679.94 - Economic data report (EDR) for the Amendment 80 sector.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: NMFS, Alaska Fisheries Science Center, Economic Data Reports, 7600 Sand Point Way NE, F/AKC2, Seattle... Operation Description of code Code NMFS Alaska region ADF&G FCP Catcher/processor Floating catcher processor. FLD Mothership Floating domestic mothership. IFP Stationary Floating Processor Inshore floating...

  3. 75 FR 52507 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-26

    ... standards designed to ensure that all catch delivered to the processor is accurately weighed and accounted... NMFS for catcher/processors and motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based...

  4. 75 FR 10756 - Proposed Information Collection; Comment Request; Amendment 80 Economic Data Report for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... Collection; Comment Request; Amendment 80 Economic Data Report for the Catcher/Processor Non-AFA Trawl Sector... catcher/processor sector. The Amendment 80 economic data report (EDR) collects cost, revenue, ownership... review the Program. The purpose of the EDR is to understand the economic effects of the Amendment 80...

  5. 76 FR 12606 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-08

    ... Catcher Vessels Less Than 60 Feet (18.3 m) Length Overall Using Jig or Hook-and-Line Gear in the Bogoslof... less than 60 feet (18.3 m) length overall (LOA) using jig or hook-and-line gear in the Bogoslof Pacific...

  6. 78 FR 68764 - Fisheries Off West Coast States; Pacific Coast Groundfish Fishery Management Plan; Commercial...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-15

    ... (coop) programs for the at-sea mothership and catcher/processor trawl fleets (whiting only). Since that... permit holder (vessel owner) to change their vessel ownership, 9. Clarify that the processor obligation..., Mothership Coop (MS) Program--Whiting At-sea Trawl Fishery, and Catcher-Processor (C/P) Coop Program--Whiting...

  7. 75 FR 14015 - Fisheries of the Exclusive Economic Zone Off Alaska; Chinook Salmon Bycatch Management in the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-23

    ... Pollock Fishery This proposed rule applies to owners and operators of catcher vessels, catcher/processors, motherships, inshore processors, and the six Western Alaska Community Development Quota (CDQ) Program groups... fishery by identifying the vessels and processors eligible to participate in the fishery and allocating...

  8. 76 FR 77757 - Fisheries of the Exclusive Economic Zone Off Alaska; Chinook Salmon Bycatch Management in the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-14

    ... the program to allow participation by all types of near shore, stationary processors for halibut... This proposed rule would apply to owners and operators of catcher vessels, catcher/processors, and inshore processors participating in the pollock (Theragra chalcogramma) trawl fisheries in the Central and...

  9. 76 FR 21705 - Fisheries of the Exclusive Economic Zone Off Alaska; Catch Accounting in the Longline Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-18

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XA361 Fisheries of the Exclusive Economic Zone Off Alaska; Catch Accounting in the Longline Catcher/Processor Pacific Cod... longliners in the Bering Sea and Aleutian Islands to support different catch accounting methods for Pacific...

  10. Application of the mass-spectrometer MASHA for mass-spectrometry and laser-spectroscopy

    NASA Astrophysics Data System (ADS)

    Rodin, A. M.; Belozerov, A. V.; Dmitriev, S. N.; Oganessian, Yu. Ts.; Sagaidak, R. N.; Salamatin, V. S.; Stepantsov, S. V.; Vanin, D. V.

    2010-02-01

    We report the present status of the mass-spectrometer MASHA (Mass-Analyzer of Supper Heavy Atoms) designed for determination of the masses of superheavy elements. The mass-spectrometer is connected to the U-400M cyclotron of the Flerov Laboratory for Nuclear Reactions (FLNR) JINR, Dubna. The first experiments on mass-measurements for 112 and 114 elements will be performed in the upcoming 2010. For this purpose a hot catcher, based on a graphite stopper, is constructed. The α-decay of the superheavy nuclides or spontaneous fission products will be detected with a silicon 192 strips detector. The experimental program of future investigations using the technique of a gas catcher is discussed. It should be regarded as an alternative of the classical ISOL technique. The possibilities are considered for using this mass-spectrometer for laser spectroscopy of nuclei far off-stability.

  11. 76 FR 39794 - Fisheries of the Economic Exclusive Zone Off Alaska; Shallow-Water Species Fishery by Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    .... 101126522-0640-02] RIN 0648-XA539 Fisheries of the Economic Exclusive Zone Off Alaska; Shallow- Water...; closure. SUMMARY: NMFS is prohibiting directed fishing for species that comprise the shallow-water species... species catch (PSC) sideboard limit specified for the shallow-water species fishery for catcher/processors...

  12. 75 FR 38938 - Fisheries of the Economic Exclusive Zone Off Alaska; Shallow-Water Species Fishery by Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    .... 0910131362-0087-02] RIN 0648-XX31 Fisheries of the Economic Exclusive Zone Off Alaska; Shallow- Water Species...: NMFS is prohibiting directed fishing for species that comprise the shallow-water species fishery for... (PSC) sideboard limit specified for the shallow-water species fishery for catcher/processors subject to...

  13. 78 FR 43125 - Fisheries off West Coast States; Pacific Coast Groundfish Fishery Management Plan; Commercial...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    .../processor trawl fleets (whiting only). Since that time, the Pacific Fishery Management Council (Council) and.... Clarify that the processor obligation may be to more than one MS permit, 10. Revise the mothership catcher... (MS) and Catcher/Processor (C/P) sectors of the Pacific Coast Groundfish fishery. This item was...

  14. 76 FR 66195 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-26

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 101126521-0640-02] RIN 0648-XA791 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National...

  15. 76 FR 4552 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0910131363-0087-02] RIN 0648-XA176 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National...

  16. 75 FR 8840 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-26

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0810141351-9087-02] RIN 0648-XU65 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National Marine...

  17. 77 FR 3638 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-25

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 101126521-0640-02] RIN 0648-XA955 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National...

  18. 75 FR 59157 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-27

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0910131363-0087-02] RIN 0648-XZ27 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National Marine...

  19. 78 FR 7280 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-01

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 111213751-2102-02] RIN 0648-XC465 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Pot Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National...

  20. 50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

  1. 50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

  2. 50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

  3. 50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

  4. 76 FR 39789 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish and Pelagic Shelf Rockfish...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    .... 101126522-0640-02] RIN 0648-XA546 Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish and Pelagic Shelf Rockfish for Trawl Catcher Vessels Participating in the Entry Level Rockfish Fishery in the...) for trawl catcher vessels participating in the entry level rockfish fishery in the Central Regulatory...

  5. 50 CFR 679.22 - Closures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) Bogoslof Pacific cod exemption area. (1) All catcher vessels less than 60 ft (18.3 m) LOA using jig or hook... Pacific cod have been caught by catcher vessels less than 60 ft (18.3 m) LOA using jig or hook-and-line... using jig or hook-and-line gear in the exemption area by notification published in the Federal Register...

  6. 50 CFR 679.22 - Closures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) Bogoslof Pacific cod exemption area. (1) All catcher vessels less than 60 ft (18.3 m) LOA using jig or hook... Pacific cod have been caught by catcher vessels less than 60 ft (18.3 m) LOA using jig or hook-and-line... using jig or hook-and-line gear in the exemption area by notification published in the Federal Register...

  7. 50 CFR 679.22 - Closures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) Bogoslof Pacific cod exemption area. (1) All catcher vessels less than 60 ft (18.3 m) LOA using jig or hook... Pacific cod have been caught by catcher vessels less than 60 ft (18.3 m) LOA using jig or hook-and-line... using jig or hook-and-line gear in the exemption area by notification published in the Federal Register...

  8. 77 FR 5389 - Fisheries of the Exclusive Economic Zone Off Alaska; Chinook Salmon Bycatch Management in the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-03

    ... for audit information on a Crab EDR. Based on experience in these EDR programs, in the final rule... hardware, software, or Internet is restored, the User must enter this same information into the electronic... Fisheries Act catcher vessels, catcher/processor, and mothership sectors as well as representatives for the...

  9. 75 FR 43090 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch in the Western Yakutat...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-23

    .... 0910131362-0087-02] RIN 0648-XX77 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch in...: NMFS is prohibiting directed fishing for Pacific ocean perch by catcher/processors participating in the... necessary to prevent exceeding the 2010 sideboard limit of Pacific ocean perch established for catcher...

  10. 77 FR 19564 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-02

    ... Catcher Vessels Using Trawl Gear in the Central Regulatory Area of the Gulf of Alaska AGENCY: National... (CVs) using trawl gear in the Central Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to CVs using trawl gear in the Central Regulatory Area of the GOA. DATES: Effective 1200 hrs...

  11. 76 FR 17569 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-30

    ... Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National Marine... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... for catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska local time (A.l.t...

  12. 78 FR 11790 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-20

    ... Catcher Vessels Using Trawl Gear in the Western Regulatory Area of the Gulf of Alaska AGENCY: National... (CVs) using trawl gear in the Western Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to CVs using trawl gear in the Western Regulatory Area of the GOA. DATES: Effective 1200 hours...

  13. 75 FR 16359 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-01

    ... Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National Marine... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... for catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska local time (A.l.t...

  14. 77 FR 13013 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... Catcher Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... vessels using trawl gear in the BSAI. After the effective date of this closure the maximum retainable...

  15. 78 FR 18528 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-27

    ... Catcher Vessels Using Trawl Gear in the Central Regulatory Area of the Gulf of Alaska AGENCY: National... (CVs) using trawl gear in the Central Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to CVs using trawl gear in the Central Regulatory Area of the GOA. DATES: Effective 1200 hrs...

  16. 75 FR 12463 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-16

    ... Vessels Using Trawl Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National Marine... using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary... for catcher vessels using trawl gear in the BSAI. DATES: Effective 1200 hrs, Alaska local time (A.l.t...

  17. 75 FR 53025 - Fisheries of the Exclusive Economic Zone Off Alaska; Chinook Salmon Bycatch Management in the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-30

    ... Amendment 91 to the Secretary of Commerce. NMFS published a Notice of Availability of this amendment in the... catcher/processors have formed a cooperative called the High Seas Catchers' Cooperative (HSCC). The AFA... substantially from 2002 through 2007, to an average of 74,067 Chinook salmon per year. A historic high of...

  18. catcher: A Software Program to Detect Answer Copying in Multiple-Choice Tests Based on Nominal Response Model

    ERIC Educational Resources Information Center

    Kalender, Ilker

    2012-01-01

    catcher is a software program designed to compute the [omega] index, a common statistical index for the identification of collusions (cheating) among examinees taking an educational or psychological test. It requires (a) responses and (b) ability estimations of individuals, and (c) item parameters to make computations and outputs the results of…

  19. 75 FR 41999 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-20

    .... 0910131362-0087-02] RIN 0648-XX65 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels Participating in the Rockfish Entry Level Trawl Fishery in the Central Regulatory... entry level fishery in the Central Regulatory Area of the Gulf of Alaska (GOA). This action is necessary...

  20. 76 FR 46207 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-02

    .... 101126522-0640-02] RIN 0648-XA612 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels Participating in the Rockfish Entry Level Trawl Fishery in the Central Regulatory... rockfish entry level fishery in the Central Regulatory Area of the Gulf of Alaska (GOA) for 48 hours. This...

  1. 76 FR 40838 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-12

    .... 101126522-0640-02] RIN 0648-XA558 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch for Catcher Vessels Participating in the Rockfish Entry Level Trawl Fishery in the Central Regulatory... rockfish entry level fishery in the Central Regulatory Area of the Gulf of Alaska (GOA) for 48 hours. This...

  2. 75 FR 6588 - Fisheries of the Exclusive Economic Zone Off Alaska; Pollock for American Fisheries Act Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-10

    ... Fisheries Act Catcher Vessels in the Inshore Open Access Fishery in the Bering Sea and Aleutian Islands... allowable catch (TAC) allocated to the inshore open access fishery in the BSAI. DATES: Effective 1200 hrs... open access fishery in the BSAI is 2,762 metric tons (mt) as established by the final 2009 and 2010...

  3. Wave Energy Prize - 1/50th Testing - Super Watt Wave Catcher Barge Team

    DOE Data Explorer

    Wesley Scharmen

    2015-12-04

    This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Super Watt Wave Catcher Barge team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)

  4. Understanding "The Catcher in the Rye": A Student Casebook to Issues, Sources, and Historical Documents.

    ERIC Educational Resources Information Center

    Pinsker, Sanford; Pinsker, Ann

    The social, cultural, and historical documents and commentary in this casebook illuminate the reading of "The Catcher in the Rye," a novel that has become an important rite of passage for many young adults. In addition to a literary analysis, the casebook acquaints students with the larger world in which Holden Caulfield, the…

  5. 50 CFR Table 47a to Part 679 - Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Annual Threshold Amount, and Percent Used To Calculate IPA Minimum Participation Assigned to Each Catcher... Allocation and Annual Threshold Amount, and Percent Used To Calculate IPA Minimum Participation Assigned to... threshold amount of 13,516 Column H Percent used to calculate IPA minimum participation Vessel name USCG...

  6. Plug-and-Display: decoration of Virus-Like Particles via isopeptide bonds for modular immunization

    PubMed Central

    Brune, Karl D.; Leneghan, Darren B.; Brian, Iona J.; Ishizuka, Andrew S.; Bachmann, Martin F.; Draper, Simon J.; Biswas, Sumi; Howarth, Mark

    2016-01-01

    Virus-like particles (VLPs) are non-infectious self-assembling nanoparticles, useful in medicine and nanotechnology. Their repetitive molecularly-defined architecture is attractive for engineering multivalency, notably for vaccination. However, decorating VLPs with target-antigens by genetic fusion or chemical modification is time-consuming and often leads to capsid misassembly or antigen misfolding, hindering generation of protective immunity. Here we establish a platform for irreversibly decorating VLPs simply by mixing with protein antigen. SpyCatcher is a genetically-encoded protein designed to spontaneously form a covalent bond to its peptide-partner SpyTag. We expressed in E. coli VLPs from the bacteriophage AP205 genetically fused to SpyCatcher. We demonstrated quantitative covalent coupling to SpyCatcher-VLPs after mixing with SpyTag-linked to malaria antigens, including CIDR and Pfs25. In addition, we showed coupling to the VLPs for peptides relevant to cancer from epidermal growth factor receptor and telomerase. Injecting SpyCatcher-VLPs decorated with a malarial antigen efficiently induced antibody responses after only a single immunization. This simple, efficient and modular decoration of nanoparticles should accelerate vaccine development, as well as other applications of nanoparticle devices. PMID:26781591

  7. Rolling-Tooth Core Breakoff and Retention Mechanism

    NASA Technical Reports Server (NTRS)

    Badescu, Mircea; Bickler, Donald B.; Sherrit, Stewart; Bar-Cohen, Yoseph; Bao, Xiaoqi; Hudson, Nicolas H.

    2011-01-01

    Sampling cores requires the controlled breakoff of the core at a known location with respect to the drill end. An additional problem is designing a mechanism that can be implemented at a small scale that is robust and versatile enough to be used for a variety of core samples. This design consists of a set of tubes (a drill tube and an inner tube) and a rolling element (rolling tooth). An additional tube can be used as a sample tube. The drill tube and the inner tube have longitudinal holes with the axes offset from the axis of each tube. The two eccentricities are equal. The inner tube fits inside the drill tube, and the sample tube fits inside the inner tube. While drilling, the two tubes are positioned relative to each other such that the sample tube is aligned with the drill tube axis and core. The drill tube includes teeth and flutes for cuttings removal. The inner tube includes, at the base, the rolling element implemented as a wheel on a shaft in an eccentric slot. An additional slot in the inner tube and a pin in the drill tube limit the relative motion of the two tubes. While drilling, the drill assembly rotates relative to the core and forces the rolling tooth to stay hidden in the slot along the inner tube wall. When the drilling depth has been reached, the drill bit assembly is rotated in the opposite direction, and the rolling tooth is engaged and penetrates into the core. Depending on the strength of the created core, the rolling tooth can score, lock the inner tube relative to the core, start the eccentric motion of the inner tube, and break the core. The tooth and the relative position of the two tubes can act as a core catcher or core-retention mechanism as well. The design was made to fit the core and hole parameters produced by an existing bit; the parts were fabricated and a series of demonstration tests were performed. This invention is potentially applicable to sample return and in situ missions to planets such as Mars and Venus, to moons such as Titan and Europa, and to comets. It is also applicable to terrestrial applications like forensic sampling and geological sampling in the field.

  8. 78 FR 23864 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Hook...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ... Catcher/Processors Using Hook-and-line Gear in the Western Regulatory Area of the Gulf of Alaska AGENCY.../processors (C/Ps) using hook-and-line gear in the Western Regulatory Area of the Gulf of Alaska (GOA). This... catch apportioned to C/Ps using hook-and-line gear in the Western Regulatory Area of the GOA. DATES...

  9. 78 FR 23683 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-22

    ... Catcher/Processors Using Trawl Gear in the Central Regulatory Area of the Gulf of Alaska AGENCY: National... (C/Ps) using trawl gear in the Central Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to C/Ps using trawl gear in the Central Regulatory Area of the GOA. DATES: Effective 1200 hours...

  10. 78 FR 54592 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-05

    ... Catcher/Processors Using Trawl Gear in the Central Regulatory Area of the Gulf of Alaska AGENCY: National... (C/Ps) using trawl gear in the Central Regulatory Area of the Gulf of Alaska (GOA). This action is... gear in the Central Regulatory Area of the GOA. DATES: Effective 1200 hours, Alaska local time (A.l.t...

  11. 75 FR 7403 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Hook...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    .... 0810141351-9087-02] RIN 0648-XU36 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Hook-and-Line Gear in the Bering Sea and Aleutian Islands Management Area AGENCY: National... using hook-and-line gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is...

  12. Adolescent Journeys: Finding Female Authority in "The Rain Catchers" and "The House on Mango Street"

    ERIC Educational Resources Information Center

    Dubb, Christina Rose

    2007-01-01

    This article compares the first-person narratives of two adolescent girls in the novels "The Rain Catchers" and "The House on Mango Street". I propose that adolescent girls can use literacy to read the world around them as a text and therefore help them to form their own identities enough to ultimately find authority in telling their own stories.…

  13. The Dream Catcher Meditation: a therapeutic technique used with American Indian adolescents.

    PubMed

    Robbins, R

    2001-01-01

    This article describes a short-term treatment insight-oriented model for American Indian adolescents, called Dream Catcher Meditation. It is aimed at helping clients' express unconscious conflicts and to facilitate differentiation and healthy mutuality. Though its duration can vary, twelve sessions are outlined here. Session descriptions include goals and sample questions. Also included are anecdotal material and reflections about cultural relevancy.

  14. 75 FR 44927 - Fisheries of the Exclusive Economic Zone Off Alaska; Pollock for American Fisheries Act Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-30

    ... Fisheries Act Catcher Vessels in the Inshore Open Access Fishery in the Bering Sea and Aleutian Islands... the inshore open access fishery in the BSAI. DATES: Effective 1200 hrs, Alaska local time (A.l.t... Bering Sea pollock TAC allocated to the AFA inshore open access fishery in the BSAI is 2,762 metric tons...

  15. Integration of the stratigraphic aspects of very large sea-floor databases using information processing

    USGS Publications Warehouse

    Jenkins, Clinton N.; Flocks, J.; Kulp, M.; ,

    2006-01-01

    Information-processing methods are described that integrate the stratigraphic aspects of large and diverse collections of sea-floor sample data. They efficiently convert common types of sea-floor data into database and GIS (geographical information system) tables, visual core logs, stratigraphic fence diagrams and sophisticated stratigraphic statistics. The input data are held in structured documents, essentially written core logs that are particularly efficient to create from raw input datasets. Techniques are described that permit efficient construction of regional databases consisting of hundreds of cores. The sedimentological observations in each core are located by their downhole depths (metres below sea floor - mbsf) and also by a verbal term that describes the sample 'situation' - a special fraction of the sediment or position in the core. The main processing creates a separate output event for each instance of top, bottom and situation, assigning top-base mbsf values from numeric or, where possible, from word-based relative locational information such as 'core catcher' in reference to sampler device, and recovery or penetration length. The processing outputs represent the sub-bottom as a sparse matrix of over 20 sediment properties of interest, such as grain size, porosity and colour. They can be plotted in a range of core-log programs including an in-built facility that better suits the requirements of sea-floor data. Finally, a suite of stratigraphic statistics are computed, including volumetric grades, overburdens, thicknesses and degrees of layering. ?? The Geological Society of London 2006.

  16. 75 FR 19562 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-15

    ... gear to catcher vessels less than 60 feet (18.3 meters) length overall (LOA) using hook-and-line or pot... vessels will not be able to harvest 400 mt of the B season apportionment of the 2010 Pacific cod TAC...)(iii)(A), NMFS apportions 400 mt of Pacific cod from the B season jig gear apportionment to catcher...

  17. 75 FR 19561 - Fisheries of the Economic Exclusive Zone Off Alaska; Pacific Cod in the Bering Sea and Aleutian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-15

    ... is opening directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 meters) length... meters) length overall using hook-and-line or pot gear in the BSAI under Sec. 679.20(d)(1)(iii) on March... 400 metric tons of Pacific cod remain in the 2010 Pacific cod apportionment for catcher vessels less...

  18. 75 FR 28502 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-21

    ... Vessels Less Than 60 feet (18.3 m) Length Overall Using Hook-and-Line or Pot Gear in the Bering Sea and... directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 m) length overall (LOA) using... exempt from review under Executive Order 12866. Authority: 16 U.S.C. 1801 et seq. Dated: May 18, 2010...

  19. An innovative piston corer for large‐volume sediment samples

    PubMed Central

    Haselmair, Alexandra; Stachowitsch, Michael; Zuschin, Martin

    2016-01-01

    Abstract Coring is one of several standard procedures to extract sediments and their faunas from open marine, estuarine, and limnic environments. Achieving sufficiently deep penetration, obtaining large sediment volumes in single deployments, and avoiding sediment loss upon retrieval remain problematic. We developed a piston corer with a diameter of 16 cm that enables penetration down to 1.5 m in a broad range of soft bottom types, yields sufficient material for multiple analyses, and prevents sediment loss due to a specially designed hydraulic core catcher. A novel extrusion system enables very precise slicing and preserves the original sediment stratification by keeping the liners upright. The corer has moderate purchase costs and a robust and simple design that allows for a deployment from relatively small vessels as available at most marine science institutions. It can easily be operated by two to three researchers rather than by specially trained technicians. In the northern Adriatic Sea, the corer successfully extracted more than 50 cores from a range of fine mud to coarse sand, at water depths from three to 45 m. The initial evaluation of the cores demonstrated their usefulness for fauna sequences along with heavy metal, nutrient and pollutant analyses. Their length is particularly suited for historical ecological work requiring sedimentary and faunal sequences to reconstruct benthic communities over the last millennia. PMID:28111529

  20. 77 FR 13510 - Pacific Cod by Catcher Vessels Less Than 50 Feet (15.2 Meters) Length Overall Using Hook-and-Line...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-07

    .... 101126522-0640-2] RIN 0648-XB062 Pacific Cod by Catcher Vessels Less Than 50 Feet (15.2 Meters) Length... (CVs) less than 50 feet (15.2 meters (m)) in length overall (LOA) using hook-and-line gear in the... season allowance of the 2012 Pacific cod total allowable catch apportioned to CVs less than 50 feet (15.2...

  1. 75 FR 15626 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-30

    ... Vessels Less Than 60 feet (18.3 m) Length Overall Using Hook-and-Line or Pot Gear in the Bering Sea and... directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 m) length overall (LOA) using... than 60 feet LOA using hook-and-line or pot gear in the BSAI. DATES: Effective 1200 hrs, Alaska local...

  2. 77 FR 55735 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod in the Bering Sea and Aleutian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... closure. SUMMARY: NMFS is opening directed fishing for Pacific cod by catcher vessels less than 60 feet... Pacific cod allocated to catcher vessels less than 60 feet LOA using hook-and-line or pot gear in the BSAI... vessels less than 60 feet LOA using hook-and-line or pot gear in the BSAI under Sec. 679.20(d)(1)(iii) on...

  3. 76 FR 24404 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod in the Bering Sea and Aleutian...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-02

    ... closure. SUMMARY: NMFS is opening directed fishing for Pacific cod by catcher vessels less than 60 feet... Pacific cod allocated to catcher vessels less than 60 feet LOA using hook-and-line or pot gear in the BSAI... less than 60 feet LOA using hook-and-line or pot gear in the BSAI under Sec. 679.20(d)(1)(iii) on March...

  4. Modular assembly of proteins on nanoparticles.

    PubMed

    Ma, Wenwei; Saccardo, Angela; Roccatano, Danilo; Aboagye-Mensah, Dorothy; Alkaseem, Mohammad; Jewkes, Matthew; Di Nezza, Francesca; Baron, Mark; Soloviev, Mikhail; Ferrari, Enrico

    2018-04-16

    Generally, the high diversity of protein properties necessitates the development of unique nanoparticle bio-conjugation methods, optimized for each different protein. Here we describe a universal bio-conjugation approach which makes use of a new recombinant fusion protein combining two distinct domains. The N-terminal part is Glutathione S-Transferase (GST) from Schistosoma japonicum, for which we identify and characterize the remarkable ability to bind gold nanoparticles (GNPs) by forming gold-sulfur bonds (Au-S). The C-terminal part of this multi-domain construct is the SpyCatcher from Streptococcus pyogenes, which provides the ability to capture recombinant proteins encoding a SpyTag. Here we show that SpyCatcher can be immobilized covalently on GNPs through GST without the loss of its full functionality. We then show that GST-SpyCatcher activated particles are able to covalently bind a SpyTag modified protein by simple mixing, through the spontaneous formation of an unusual isopeptide bond.

  5. Aircraft Survivability: Space Survivability - Time to Get Serious, Summer 2008

    DTIC Science & Technology

    2008-01-01

    modified to allow a capabil- ity to launch MANPADS with live warheads. Thus, METS was born. METS is a single - stage cold gas gun that uses compressed...30 feet from the target (see Figure 3). API projectiles or frag- ments fired from the gun passed through a sabot catcher (a thick metal plate with a...Body (T=2040K) Fit Water (T=2010K) Detectors Sabot catcher Shot line Gun Test Fixture Target Panel Figure 2 An Instantaneous Temperature Measurement in

  6. Programmable polyproteams built using twin peptide superglues

    PubMed Central

    Veggiani, Gianluca; Nakamura, Tomohiko; Brenner, Michael D.; Yan, Jun; Robinson, Carol V.; Howarth, Mark

    2016-01-01

    Programmed connection of amino acids or nucleotides into chains introduced a revolution in control of biological function. Reacting proteins together is more complex because of the number of reactive groups and delicate stability. Here we achieved sequence-programmed irreversible connection of protein units, forming polyprotein teams by sequential amidation and transamidation. SpyTag peptide is engineered to spontaneously form an isopeptide bond with SpyCatcher protein. By engineering the adhesin RrgA from Streptococcus pneumoniae, we developed the peptide SnoopTag, which formed a spontaneous isopeptide bond to its protein partner SnoopCatcher with >99% yield and no cross-reaction to SpyTag/SpyCatcher. Solid-phase attachment followed by sequential SpyTag or SnoopTag reaction between building-blocks enabled iterative extension. Linear, branched, and combinatorial polyproteins were synthesized, identifying optimal combinations of ligands against death receptors and growth factor receptors for cancer cell death signal activation. This simple and modular route to programmable “polyproteams” should enable exploration of a new area of biological space. PMID:26787909

  7. Programmable polyproteams built using twin peptide superglues.

    PubMed

    Veggiani, Gianluca; Nakamura, Tomohiko; Brenner, Michael D; Gayet, Raphaël V; Yan, Jun; Robinson, Carol V; Howarth, Mark

    2016-02-02

    Programmed connection of amino acids or nucleotides into chains introduced a revolution in control of biological function. Reacting proteins together is more complex because of the number of reactive groups and delicate stability. Here we achieved sequence-programmed irreversible connection of protein units, forming polyprotein teams by sequential amidation and transamidation. SpyTag peptide is engineered to spontaneously form an isopeptide bond with SpyCatcher protein. By engineering the adhesin RrgA from Streptococcus pneumoniae, we developed the peptide SnoopTag, which formed a spontaneous isopeptide bond to its protein partner SnoopCatcher with >99% yield and no cross-reaction to SpyTag/SpyCatcher. Solid-phase attachment followed by sequential SpyTag or SnoopTag reaction between building-blocks enabled iterative extension. Linear, branched, and combinatorial polyproteins were synthesized, identifying optimal combinations of ligands against death receptors and growth factor receptors for cancer cell death signal activation. This simple and modular route to programmable "polyproteams" should enable exploration of a new area of biological space.

  8. Construction and performance of a silicon photomultiplier/extruded scintillator tail-catcher and muon-tracker

    NASA Astrophysics Data System (ADS)

    Adloff, C.; Blaha, J.; Blaising, J.-J.; Drancourt, C.; Espargilière, A.; Gaglione, R.; Geffroy, N.; Karyotakis, Y.; Prast, J.; Vouters, G.; Bilki, B.; Francis, K.; Repond, J.; Smith, J.; Xia, L.; Baldolemar, E.; Li, J.; Park, S. T.; Sosebee, M.; White, A. P.; Yu, J.; Buanes, T.; Eigen, G.; Mikami, Y.; Watson, N. K.; Mavromanolakis, G.; Thomson, M. A.; Ward, D. R.; Yan, W.; Benchekroun, D.; Hoummada, A.; Khoulaki, Y.; Benyamna, M.; Cârloganu, C.; Fehr, F.; Gay, P.; Manen, S.; Royer, L.; Blazey, G. C.; Boona, S.; Chakraborty, D.; Dyshkant, A.; Hedin, D.; Lima, J. G. R.; Powell, J.; Rykalin, V.; Scurti, N.; Smith, M.; Tran, N.; Zutshi, V.; Hostachy, J.-Y.; Morin, L.; Cornett, U.; David, D.; Dietrich, J.; Falley, G.; Gadow, K.; Göttlicher, P.; Günter, C.; Hermberg, B.; Karstensen, S.; Krivan, F.; Lucaci-Timoce, A.-I.; Lu, S.; Lutz, B.; Marchesini, I.; Morozov, S.; Morgunov, V.; Reinecke, M.; Sefkow, F.; Smirnov, P.; Terwort, M.; Vargas-Trevino, A.; Feege, N.; Garutti, E.; Eckert, P.; Kaplan, A.; Schultz-Coulon, H.-Ch; Shen, W.; Stamen, R.; Tadday, A.; Norbeck, E.; Onel, Y.; Wilson, G. W.; Kawagoe, K.; Uozumi, S.; Dauncey, P. D.; Magnan, A.-M.; Bartsch, V.; Wing, M.; Salvatore, F.; Calvo Alamillo, E.; Fouz, M.-C.; Puerta-Pelayo, J.; Bobchenko, B.; Chadeeva, M.; Danilov, M.; Epifantsev, A.; Markin, O.; Mizuk, R.; Novikov, E.; Rusinov, V.; Tarkovsky, E.; Kirikova, N.; Kozlov, V.; Soloviev, Y.; Buzhan, P.; Dolgoshein, B.; Ilyin, A.; Kantserov, V.; Kaplin, V.; Karakash, A.; Popova, E.; Smirnov, S.; Frey, A.; Kiesling, C.; Seidel, K.; Simon, F.; Soldner, C.; Weuste, L.; Bonis, J.; Bouquet, B.; Callier, S.; Cornebise, P.; Doublet, Ph; Dulucq, F.; Faucci Giannelli, M.; Fleury, J.; Li, H.; Martin-Chassard, G.; Richard, F.; de la Taille, Ch; Pöschl, R.; Raux, L.; Seguin-Moreau, N.; Wicek, F.; Anduze, M.; Boudry, V.; Brient, J.-C.; Jeans, D.; Mora de Freitas, P.; Musat, G.; Reinhard, M.; Ruan, M.; Videau, H.; Bulanek, B.; Zacek, J.; Cvach, J.; Gallus, P.; Havranek, M.; Janata, M.; Kvasnicka, J.; Lednicky, D.; Marcisovsky, M.; Polak, I.; Popule, J.; Tomasek, L.; Tomasek, M.; Ruzicka, P.; Sicho, P.; Smolik, J.; Vrba, V.; Zalesak, J.; Belhorma, B.; Ghazlane, H.; Takeshita, T.

    2012-04-01

    A prototype module for an International Linear Collider (ILC) detector was built, installed, and tested between 2006 and 2009 at CERN and Fermilab as part of the CALICE test beam program, in order to study the possibilities of extending energy sampling behind a hadronic calorimeter and to study the possibilities of providing muon tracking. The ``tail catcher/muon tracker'' (TCMT) is composed of 320 extruded scintillator strips (dimensions 1000 × 50 × 5 mm3) packaged in 16 one-meter square planes interleaved between steel plates. The scintillator strips were read out with wavelength shifting fibers and silicon photomultipliers. The planes were arranged with alternating horizontal and vertical strip orientations. Data were collected for muons and pions in the energy range 6 GeV to 80 GeV. Utilizing data taken in 2006, this paper describes the design and construction of the TCMT, performance characteristics, and a beam-based evaluation of the ability of the TCMT to improve hadronic energy resolution in a prototype ILC detector. For a typical configuration of an ILC detector with a coil situated outside a calorimeter system with a thickness of 5.5 nuclear interaction lengths, a TCMT would improve relative energy resolution by 6-16% for pions between 20 and 80 GeV.

  9. Sizing of "Mother Ship and Catcher" Concepts for LEO Small Debris Capture

    NASA Technical Reports Server (NTRS)

    Bacon, John B.

    2009-01-01

    Most Low Earth Orbit (LEO) debris lies in a limited number of inclination "bands" associated with launch latitudes, or with specific useful orbit inclinations (such as polar orbits). Such narrow inclination bands generally have a uniform spread over all possible Right Ascensions of Ascending Node (RAANs), creating a different orbit plane for nearly every piece of debris. This complicates concept of rendezvous and capture for debris removal. However, a low-orbiting satellite will always phase in RAAN faster than debris objects in higher orbits at the same inclination, potentially solving the problem. Such a base can serve as a single space-based launch facility (a "mother ship") that can tend and then send tiny individual catcher devices for each debris object, as the facility drifts into the same RAAN as the higher object. This presentation will highlight characteristic system requirements of such an architecture, including structural and navigation requirements, power, mass and dV budgets for both the mother ship and the mass-produced common catcher devices that would clean out selected inclination bands. The altitude and inclination regime over which a band is to be cleared, the size distribution of the debris, and the inclusion of additional mission priorities all affect the sizing of the system. It is demonstrated that major LEO hazardous debris reductions can be realized in each band with a single LEO launch of a single mother ship, with simple attached catchers of total mass less than typical commercial LEO launch capability.

  10. Radiation protection design for the Super-FRS and SIS100 at the international FAIR facility

    NASA Astrophysics Data System (ADS)

    Kozlova, Ekaterina; Sokolov, Alexey; Radon, Torsten; Lang, Rupert; Conrad, Inna; Fehrenbacher, Georg; Weick, Helmut; Winkler, Martin

    2017-09-01

    The new accelerator SIS100 and the Super-FRS will be built at the international Facility for Antiprotons and Ion Research FAIR. The synchrotron SIS100 is a core part of the FAIR facility which serves for acceleration of ions like Uranium up to 2.7 GeV/u with intensities of 3x1011 particles per second or protons up to 30 GeV with intensities of 5x1012 particles per second. The Super-FRS is a superconducting fragment separator, it will be able to separate all kinds of nuclear projectile fragments of primary heavy ion beams including Uranium with energies up to 1.5 GeV/u and intensities up to 3x1011 particles per second. During operation activation of several components, especially the production target and the beam catchers will take place. For handling of highly activated components it is foreseen to have a hot cell with connected storage place. All calculations for the optimisation of the shielding design of the SIS100, the Super-FRS and the hot cell were performed using the Monte Carlo code FLUKA, results are presented.

  11. Coring device with a improved core sleeve and anti-gripping collar with a collective core catcher

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Story, A.L.; Filshtinsky, M.

    1986-01-28

    This patent describes an improved coring apparatus used in combination with a coring bit and drill string. This device consists of: an outer driving structure adapted to be connected at one end to the coring bit for cutting a core in a borehole, and at the other end to the lower end of the drill string in telescoping and co-rotatable manner therewith; an inner barrel disposed within the outer driving structure and including a lower end portion adjacent to the bit; first means supporting the inner barrel in spaced relationship to the outer driving structure while permitting rotation of themore » driving structure with respect to the inner barrel; a woven metal mesh sleeve mounted in surrounding relation on at least a portion of the exterior surface of the inner barrel; second means, connected to a free end of the sleeve opposite the leading portion of the sleeve, for maintaining the portion of the sleeve which surrounds the inner barrel in compression and to maintain an inside diameter greater than the outside diameter of the inner barrel of the portion of the sleeve surrounding the inner barrel while the portion of the sleeve positioned inside the inner barrel being in tension to grip and compress a core received within the sleeve and having an outside diameter less than the inside diameter of the inner barrel when in tension, wherein the second means is also for engaging the core when the means is drawn into the inner barrel, and third means positioned within the inner barrel and connected to the leading portion of the sleeve to draw the sleeve within the inner barrel and to apply tension to the portion of the sleeve within the barrel to encase and grip the core as it is cut.« less

  12. Hayabusa Reentry and Recovery of Its Capsule -Quick Report

    NASA Astrophysics Data System (ADS)

    Kawaguchi, Junichiro; Yoshikawa, Makoto; Kuninaka, Hitoshi

    The Hayabusa spacecraft successfully returned to the Earth and re-entered into the atmosphere for sample recovery after also the successful touching-downs to NEO Itokawa in 2005. The reentry occurred on June 13th, and took place in Woomera Prohibited Area (WPA) of Australia. This paper presents how the reentry and recovery operations were performed, and also reports the current status about the sample curation activity. The Hayabusa mission aims at demonstrating key technologies requisite for future real Sample and Return missions. However, the spacecraft adopted the actual Sample and Return flight sequence and was designed to make a world's first round trip to an extra terrestrial object with touching-down and lifting-off. It is the spacecraft propelled by the ion engines aboard for interplanetary cruise. The Hayabusa spacecraft launched in May of 2003 reached NEO Itokawa in September of 2005 via Earth gravity assist in May of 2004. It stayed there for about two and a half months, and performed detailed scientific observation and mapping and determination of the shape. In November of 2005, the spacecraft made two touching-downs and lifting-offs having attempted collection of surface sample. At the second opportunity, the spacecraft directed shooting a projectile. But, due to the programming problem, presumably the projectile was not shot. However, the spacecraft may have captured some small amount of sample particles in a catcher aboard, when the spacecraft made actual touches down to the surface. The spacecraft suffered from fuel leak in December of 2005, and the communication resumed after seven weeks of hiatus. And the ion engines all faced their life by November of 2009, and the project team devised an alternative drive configuration and successfully coped with the difficulty. Despite many hardships, the spacecraft has been operated for return cruise, and it made a reentry for sample recovery this June. The sample catcher was retrieved at WPA and transported back to the curation facility of JAXA. Currently the curators have examined analyzed the catcher recovered. This presentation quickly reports recent status of the spacecraft, capsule and sample analysis.

  13. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wu, H.L.; Spronsen, G. van; Klaus, E.H.

    A simulation model of the dynamics of a by-pass pig and related two-phase flow behavior along with field trials of the pig in a dry-gas pipeline have revealed significant gains in use of a by-pass pig in modifying gas and liquid production rates. The method can widen the possibility of applying two-phase flow pipeline transportation to cases in which separator or slug-catcher capacity is limited by practicality or cost. Pigging two-phase pipelines normally generates large liquid slug volumes in front of the pig. These require large separators or slug catchers. Using a high by-pass pig to disperse the liquid andmore » reduce the maximum liquid production rate before pig arrival has been investigated by Shell Exploration and Production companies. A simulation model of the dynamics of the pig and related two-phase flow behavior in the pipeline was used to predict the performance of by-pass pigs. Field trials in a dry-gas pipeline were carried out to provide friction data and to validate the model. The predicted mobility of the high by-pass pig in the pipeline and risers was verified and the beneficial effects due to the by-pass concept exceeded the prediction of the simplified model.« less

  14. Improving the malaria transmission-blocking activity of a Plasmodium falciparum 48/45 based vaccine antigen by SpyTag/SpyCatcher mediated virus-like display.

    PubMed

    Singh, Susheel K; Thrane, Susan; Janitzek, Christoph M; Nielsen, Morten A; Theander, Thor G; Theisen, Michael; Salanti, Ali; Sander, Adam F

    2017-06-27

    Malaria is a devastating disease caused by Plasmodium parasites, resulting in almost 0.5 million deaths per year. The Pfs48/45 protein exposed on the P. falciparum sexual stages is one of the most advanced antigen candidates for a transmission-blocking (TB) vaccine in the clinical pipeline. However, it remains essential to identify an optimal vaccine formulation that can facilitate induction of a long-lasting TB anti-Pfs48/45 response. Here we report on the development and evaluation of two Pfs48/45-based virus-like particle (VLP) vaccines generated using the AP205 SpyTag/Catcher VLP system. Two different recombinant proteins (SpyCatcher-R0.6C and SpyCatcher-6C), comprising the Pfs48/45-6C region, were covalently attached to the surface of Spy-tagged Acinetobacter phage AP205 VLPs. Resulting Pfs48/45-VLP complexes appeared as non-aggregated particles of ∼30nm, each displaying an average of 216 (R0.6C) or 291 (6C) copies of the antigens. Both R0.6C and 6C VLP conjugates were strongly reactive with a monoclonal antibody (mAb45.1) targeting a conformational TB Pfs48/45 epitope, suggesting that the TB epitope is accessible for immune recognition on the particles. To select the most suitable vaccine formulation for downstream clinical studies the two VLP vaccines were tested in CD1 mice using different adjuvant formulations. The study demonstrates that VLP-display of R0.6C and 6C significantly increases antigen immunogenicity when using Montanide ISA 720 VG as extrinsic adjuvant. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Effect of Au irradiation energy on ejection of ZnS nanoparticles from ZnS film

    NASA Astrophysics Data System (ADS)

    Kuiri, P. K.; Ghatak, J.; Joseph, B.; Lenka, H. P.; Sahu, G.; Mahapatra, D. P.; Tripathi, A.; Kanjilal, D.; Mishra, N. C.

    2007-01-01

    ZnS films deposited on Si have been irradiated with Au ions at 35 keV, 2, and 100 MeV. Sputtered particles, collected on catcher foils during irradiation, were analyzed using transmission electron microscopy. For the case of 35 keV Au irradiation, no nanoparticle (NP) could be observed on the catcher foil. However, NPs 2-7 nm in size, have been observed on the catcher foils for MeV irradiations at room temperature. For particle sizes ≥3 nm, the distributions could be fitted to power law decays with decay exponents varying between 2 and 3.5. At 2 MeV, after correction for cluster breakup effects, the decay exponent has been found to be close to 2, indicating shock waves induced ejection to be the dominant mechanism. The corrected decay exponent for the 100 MeV Au irradiation case has been found to be about 2.6. Coulomb explosion followed by thermal spike induced vaporization of ZnS seems to be the dominant mechanism regarding material removal at such high energy. In such a case the evaporated material can cool down going into the fragmentation region forming clusters.

  16. Determining whether a ball will land behind or in front of you: not just a combination of expansion and angular velocity.

    PubMed

    Brouwer, Anne-Marie; López-Moliner, Joan; Brenner, Eli; Smeets, Jeroen B J

    2006-02-01

    We propose and evaluate a source of information that ball catchers may use to determine whether a ball will land behind or in front of them. It combines estimates for the ball's horizontal and vertical speed. These estimates are based, respectively, on the rate of angular expansion and vertical velocity. Our variable could account for ball catchers' data of Oudejans et al. [The effects of baseball experience on movement initiation in catching fly balls. Journal of Sports Sciences, 15, 587-595], but those data could also be explained by the use of angular expansion alone. We therefore conducted additional experiments in which we asked subjects where simulated balls would land under conditions in which both angular expansion and vertical velocity must be combined for obtaining a correct response. Subjects made systematic errors. We found evidence for the use of angular velocity but hardly any indication for the use of angular expansion. Thus, if catchers use a strategy that involves combining vertical and horizontal estimates of the ball's speed, they do not obtain their estimates of the horizontal component from the rate of expansion alone.

  17. Contribution of Visual Information about Ball Trajectory to Baseball Hitting Accuracy

    PubMed Central

    Higuchi, Takatoshi; Nagami, Tomoyuki; Nakata, Hiroki; Watanabe, Masakazu; Isaka, Tadao; Kanosue, Kazuyuki

    2016-01-01

    The contribution of visual information about a pitched ball to the accuracy of baseball-bat contact may vary depending on the part of trajectory seen. The purpose of the present study was to examine the relationship between hitting accuracy and the segment of the trajectory of the flying ball that can be seen by the batter. Ten college baseball field players participated in the study. The systematic error and standardized variability of ball-bat contact on the bat coordinate system and pitcher-to-catcher direction when hitting a ball launched from a pitching machine were measured with or without visual occlusion and analyzed using analysis of variance. The visual occlusion timing included occlusion from 150 milliseconds (ms) after the ball release (R+150), occlusion from 150 ms before the expected arrival of the launched ball at the home plate (A-150), and a condition with no occlusion (NO). Twelve trials in each condition were performed using two ball speeds (31.9 m·s-1 and 40.3 m·s-1). Visual occlusion did not affect the mean location of ball-bat contact in the bat’s long axis, short axis, and pitcher-to-catcher directions. Although the magnitude of standardized variability was significantly smaller in the bat’s short axis direction than in the bat’s long axis and pitcher-to-catcher directions (p < 0.001), additional visible time from the R+150 condition to the A-150 and NO conditions resulted in a further decrease in standardized variability only in the bat’s short axis direction (p < 0.05). The results suggested that there is directional specificity in the magnitude of standardized variability with different visible time. The present study also confirmed the limitation to visual information is the later part of the ball trajectory for improving hitting accuracy, which is likely due to visuo-motor delay. PMID:26848742

  18. Contribution of Visual Information about Ball Trajectory to Baseball Hitting Accuracy.

    PubMed

    Higuchi, Takatoshi; Nagami, Tomoyuki; Nakata, Hiroki; Watanabe, Masakazu; Isaka, Tadao; Kanosue, Kazuyuki

    2016-01-01

    The contribution of visual information about a pitched ball to the accuracy of baseball-bat contact may vary depending on the part of trajectory seen. The purpose of the present study was to examine the relationship between hitting accuracy and the segment of the trajectory of the flying ball that can be seen by the batter. Ten college baseball field players participated in the study. The systematic error and standardized variability of ball-bat contact on the bat coordinate system and pitcher-to-catcher direction when hitting a ball launched from a pitching machine were measured with or without visual occlusion and analyzed using analysis of variance. The visual occlusion timing included occlusion from 150 milliseconds (ms) after the ball release (R+150), occlusion from 150 ms before the expected arrival of the launched ball at the home plate (A-150), and a condition with no occlusion (NO). Twelve trials in each condition were performed using two ball speeds (31.9 m·s-1 and 40.3 m·s-1). Visual occlusion did not affect the mean location of ball-bat contact in the bat's long axis, short axis, and pitcher-to-catcher directions. Although the magnitude of standardized variability was significantly smaller in the bat's short axis direction than in the bat's long axis and pitcher-to-catcher directions (p < 0.001), additional visible time from the R+150 condition to the A-150 and NO conditions resulted in a further decrease in standardized variability only in the bat's short axis direction (p < 0.05). The results suggested that there is directional specificity in the magnitude of standardized variability with different visible time. The present study also confirmed the limitation to visual information is the later part of the ball trajectory for improving hitting accuracy, which is likely due to visuo-motor delay.

  19. Compositional Variations of Paleogene and Neogene Tephra From the Northern Izu-Bonin-Mariana Arc

    NASA Astrophysics Data System (ADS)

    Tepley, F. J., III; Barth, A. P.; Brandl, P. A.; Hickey-Vargas, R.; Jiang, F.; Kanayama, K.; Kusano, Y.; Li, H.; Marsaglia, K. M.; McCarthy, A.; Meffre, S.; Savov, I. P.; Yogodzinski, G. M.

    2014-12-01

    A primary objective of IODP Expedition 351 was to evaluate arc initiation processes of the Izu-Bonin-Mariana (IBM) volcanic arc and its compositional evolution through time. To this end, a single thick section of sediment overlying oceanic crust was cored in the Amami Sankaku Basin where a complete sediment record of arc inception and evolution is preserved. This sediment record includes ash and pyroclasts, deposited in fore-arc, arc, and back-arc settings, likely associated with both the ~49-25 Ma emergent IBM volcanic arc and the evolving Ryukyu-Kyushu volcanic arc. Our goal was to assess the major element evolution of the nascent and evolving IBM system using the temporally constrained record of the early and developing system. In all, more than 100 ash and tuff layers, and pyroclastic fragments were selected from temporally resolved portions of the core, and from representative fractions of the overall core ("core catcher"). The samples were prepared to determine major and minor element compositions via electron microprobe analyses. This ash and pyroclast record will allow us to 1) resolve the Paleogene evolutionary history of the northern IBM arc in greater detail; 2) determine compositional variations of this portion of the IBM arc through time; 3) compare the acquired data to an extensive whole rock and tephra dataset from other segments of the IBM arc; 4) test hypotheses of northern IBM arc evolution and the involvement of different source reservoirs; and 5) mark important stratigraphic markers associated with the Neogene volcanic history of the adjacent evolving Ryukyu-Kyushu arc.

  20. On the powerful use of simulations in the quake-catcher network to efficiently position low-cost earthquake sensors

    USGS Publications Warehouse

    Benson, K.; Estrada, T.; Taufer, M.; Lawrence, J.; Cochran, E.

    2011-01-01

    The Quake-Catcher Network (QCN) uses low-cost sensors connected to volunteer computers across the world to monitor seismic events. The location and density of these sensors' placement can impact the accuracy of the event detection. Because testing different special arrangements of new sensors could disrupt the currently active project, this would best be accomplished in a simulated environment. This paper presents an accurate and efficient framework for simulating the low cost QCN sensors and identifying their most effective locations and densities. Results presented show how our simulations are reliable tools to study diverse scenarios under different geographical and infrastructural constraints. ?? 2011 IEEE.

  1. Electronic sputtering of vitreous SiO2: Experimental and modeling results

    NASA Astrophysics Data System (ADS)

    Toulemonde, M.; Assmann, W.; Trautmann, C.

    2016-07-01

    The irradiation of solids with swift heavy ions leads to pronounced surface and bulk effects controlled by the electronic energy loss of the projectiles. In contrast to the formation of ion tracks in bulk materials, the concomitant emission of atoms from the surface is much less investigated. Sputtering experiments with different ions (58Ni, 127I and 197Au) at energies around 1.2 MeV/u were performed on vitreous SiO2 (a-SiO2) in order to quantify the emission rates and compare them with data for crystalline SiO2 quartz. Stoichiometry of the sputtering process was verified by monitoring the thickness decreases of a thin SiO2 film deposited on a Si substrate. Angular distributions of the emitted atoms were measured by collecting sputtered atoms on arc-shaped Cu catcher foils. Subsequent analysis of the number of Si atoms deposited on the catcher foils was quantified by elastic recoil detection analysis providing differential as well as total sputtering yields. Compared to existing data for crystalline SiO2, the total sputtering yields for vitreous SiO2 are by a factor of about five larger. Differences in the sputtering rate and track formation characteristics between amorphous and crystalline SiO2 are discussed within the frame of the inelastic thermal spike model.

  2. Hayabusa2 Sample Catcher and Container: Metal-Seal System for Vacuum Encapsulation of Returned Samples with Volatiles and Organic Compounds Recovered from C-Type Asteroid Ryugu

    NASA Astrophysics Data System (ADS)

    Okazaki, Ryuji; Sawada, Hirotaka; Yamanouchi, Shinji; Tachibana, Shogo; Miura, Yayoi N.; Sakamoto, Kanako; Takano, Yoshinori; Abe, Masanao; Itoh, Shoichi; Yamada, Keita; Yabuta, Hikaru; Okamoto, Chisato; Yano, Hajime; Noguchi, Takaaki; Nakamura, Tomoki; Nagao, Keisuke

    2017-07-01

    The spacecraft Hayabusa2 was launched on December 3, 2014, to collect and return samples from a C-type asteroid, 162173 Ryugu (provisional designation, 1999 JU3). It is expected that the samples collected contain organic matter and water-bearing minerals and have key information to elucidate the origin and history of the Solar System and the evolution of bio-related organics prior to delivery to the early Earth. In order to obtain samples with volatile species without terrestrial contamination, based on lessons learned from the Hayabusa mission, the sample catcher and container of Hayabusa2 were refined from those used in Hayabusa. The improvements include (1) a mirror finish of the inner wall surface of the sample catcher and the container, (2) adoption of an aluminum metal sealing system, and (3) addition of a gas-sampling interface for gas collection and evacuation. The former two improvements were made to limit contamination of the samples by terrestrial atmosphere below 1 Pa after the container is sealed. The gas-sampling interface will be used to promptly collect volatile species released from the samples in the sample container after sealing of the container. These improvements maintain the value of the returned samples.

  3. The Palliative Care Chaplain as Story Catcher.

    PubMed

    Cooper, Rhonda S

    2018-01-01

    The role of the professional chaplain on the palliative care team in the health care setting formalizes the concern for the emotional, spiritual, and social well-being of the care recipients and their caregivers. The chaplain also has a peculiar role on the team, in that her most fundamental task is her intentional listening-and-hearing of the other person's story. One palliative chaplain introduces herself as a Story Catcher to care recipients, in an effort both to overcome the resistance some may have to her presence on the team and communicate her essential role and intent in providing spiritual care. This self-appointed sobriquet resonates with the author's embrace of the theory and practice of the late theologian, educator, and civil rights activist Nelle Morton, who coined the phrase "hearing into speech" to describe the process by which another person, through being truly heard and entering into a relationship with the hearer, claims her/his own truth, hope, and identity in the face of adversity. The chaplain as Story Catcher functions as the agent of healing and hope for those who choose to tell their stories and are heard, as they resist their illness and death rather than submit to its indignity. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  4. Paint-Overspray Catcher

    NASA Technical Reports Server (NTRS)

    Weinstein, Leonard M.

    2003-01-01

    An apparatus to catch paint overspray has been proposed. Overspray is an unavoidable parasitic component of spray that occurs because the flow of air or other gas in the spray must turn at the sprayed surface. Very small droplets are carried away in this turning flow, and some land on adjacent surfaces not meant to be painted. The basic principle of the paint-spray catcher is to divert the overspray into a suction system at the boundary of the area to be painted. The paint-spray catcher (see figure) would include a toroidal plenum connected through narrow throat to a nozzle that would face toward the center of the torus, which would be positioned over the center of the area to be spray-painted. The plenum would be supported by four tubes that would also serve as suction exhaust ducts. The downstream ends of the tubes (not shown in the figure) would be connected to a filter on a suction pump. The pump would be rated to provide a suction mass flow somewhat greater than that of the directed spray gas stream, so that the nozzle would take in a small excess of surrounding gas and catch nearly all of the overspray. A small raised lip at the bottom edge of the nozzle would catch paint that landed inside the nozzle. Even if the paint is directly piston pumped, the droplets entrain an air flow by time they approach the wall, so there is always a gas stream to carry the excess droplets to the side. For long-duration spraying operations, it could be desirable to include a suction-drain apparatus to prevent overflowing and dripping of paint from inside the lip. A version without an external contraction and with the throat angled downward would be a more compact version of catcher, although it might be slightly less efficient.

  5. A new setup for experimental investigations of solar wind sputtering

    NASA Astrophysics Data System (ADS)

    Szabo, Paul S.; Berger, Bernhard M.; Chiba, Rimpei; Stadlmayr, Reinhard; Aumayr, Friedrich

    2017-04-01

    The surfaces of Mercury and Moon are not shielded by a thick atmosphere and therefore they are exposed to bombardment by charged particles, ultraviolet photons and micrometeorites. These influences lead to an alteration and erosion of the surface, and the emitted atoms and molecules form a thin atmosphere, an exosphere, around these celestial bodies [1]. The composition of these exospheres is connected to the surface composition and has been subject to flyby measurements by satellites. Model calculations which include the erosion mechanisms can be used as a method of comparison for such exosphere measurements and allow conclusions about the surface composition. Surface sputtering induced by solar wind ions hereby represents a major contribution to the erosion of the surfaces of Mercury and Moon [1]. However, the experimental database for sputtering of respective analogue materials by solar wind ions, which would be necessary for exact modelling of the space weathering process, is still in its early stages. Sputtering experiments have been performed at TU Wien during the past years using a quartz crystal microbalance (QCM) technique [2]. Target material is deposited on the quartz surface as a thin layer and the quartz's resonance frequency is measured under ion bombardment. The sputter yield can then be calculated from the frequency change and the ion current [2]. In order to remove the restrictions of a thin layer QCM target and simplify experiments with composite targets, a new QCM catcher setup was developed. In the new design, the QCM is placed beside the target holder and acts as a catcher for material that is sputtered from the target surface. By comparing the catcher signal to reference measurements and SDTrimSP simulations [3], the target sputter yield can be determined. In order to test the setup, we have performed experiments with a Au-coated QCM target under 2 keV Ar+ bombardment so that both the mass changes at the target and at the catcher could be obtained simultaneously. The results coincide very well with SDTrimSP predictions showing the feasibility of the new design [4]. Furthermore, Fe-coated QCM targets with different surface roughness were investigated in the new setup. The surface roughness represents a key factor for the solar wind induced erosion of planetary or lunar rocks. It has a strong influence on the absolute sputtering yield as well as on the spatial distribution of sputtered particles and was therefore investigated. As a next step, sputtering experiments with Mercury or Moon analogues will be conducted. Knowledge gained in the course of this research will enhance the understanding of surface sputtering by solar wind ions and used to improve theoretical models of the Mercury's and Moon's exosphere formation. References: [1] E. Kallio, et al., Planetary and Space Science, 56, 1506 (2008). [2] G. Hayderer, et al., Review of Scientific Instruments, 70, 3696 (1999). [3] A. Mutzke, R. Schneider, W. Eckstein, R. Dohmen, SDTrimSP: Version 5.00, IPP Report, 12/8, (2011). [4] B. M. Berger, P. S. Szabo, R. Stadlmayr, F. Aumayr, Nucl. Instrum. Meth. Phys. Res. B, doi: 10.1016/j.nimb.2016.11.039

  6. PAMELA A payload for antimatter matter exploration and light-nuclei astrophysics

    NASA Astrophysics Data System (ADS)

    Picozza, P.; Galper, A. M.; Castellini, G.; Adriani, O.; Altamura, F.; Ambriola, M.; Barbarino, G. C.; Basili, A.; Bazilevskaja, G. A.; Bencardino, R.; Boezio, M.; Bogomolov, E. A.; Bonechi, L.; Bongi, M.; Bongiorno, L.; Bonvicini, V.; Cafagna, F.; Campana, D.; Carlson, P.; Casolino, M.; de Marzo, C.; de Pascale, M. P.; de Rosa, G.; Fedele, D.; Hofverberg, P.; Koldashov, S. V.; Krutkov, S. Yu.; Kvashnin, A. N.; Lund, J.; Lundquist, J.; Maksumov, O.; Malvezzi, V.; Marcelli, L.; Menn, W.; Mikhailov, V. V.; Minori, M.; Misin, S.; Mocchiutti, E.; Morselli, A.; Nikonov, N. N.; Orsi, S.; Osteria, G.; Papini, P.; Pearce, M.; Ricci, M.; Ricciarini, S. B.; Runtso, M. F.; Russo, S.; Simon, M.; Sparvoli, R.; Spillantini, P.; Stozhkov, Yu. I.; Taddei, E.; Vacchi, A.; Vannuccini, E.; Voronov, S. A.; Yurkin, Y. T.; Zampa, G.; Zampa, N.; Zverev, V. G.

    2007-04-01

    The PAMELA experiment is a satellite-borne apparatus designed to study charged particles in the cosmic radiation with a particular focus on antiparticles. PAMELA is mounted on the Resurs DK1 satellite that was launched from the Baikonur cosmodrome on June 15th 2006. The PAMELA apparatus comprises a time-of-flight system, a magnetic spectrometer, a silicon tungsten electromagnetic calorimeter, an anticoincidence system, a shower tail catcher scintillator and a neutron detector. The combination of these devices allows antiparticles to be reliably identified from a large background of other charged particles. This paper reviews the design, space qualification and on-ground performance of PAMELA. The in-orbit performance will be discussed in future publications.

  7. A Monte Carlo-based framework enhances the discovery and interpretation of regulatory sequence motifs

    PubMed Central

    2012-01-01

    Background Discovery of functionally significant short, statistically overrepresented subsequence patterns (motifs) in a set of sequences is a challenging problem in bioinformatics. Oftentimes, not all sequences in the set contain a motif. These non-motif-containing sequences complicate the algorithmic discovery of motifs. Filtering the non-motif-containing sequences from the larger set of sequences while simultaneously determining the identity of the motif is, therefore, desirable and a non-trivial problem in motif discovery research. Results We describe MotifCatcher, a framework that extends the sensitivity of existing motif-finding tools by employing random sampling to effectively remove non-motif-containing sequences from the motif search. We developed two implementations of our algorithm; each built around a commonly used motif-finding tool, and applied our algorithm to three diverse chromatin immunoprecipitation (ChIP) data sets. In each case, the motif finder with the MotifCatcher extension demonstrated improved sensitivity over the motif finder alone. Our approach organizes candidate functionally significant discovered motifs into a tree, which allowed us to make additional insights. In all cases, we were able to support our findings with experimental work from the literature. Conclusions Our framework demonstrates that additional processing at the sequence entry level can significantly improve the performance of existing motif-finding tools. For each biological data set tested, we were able to propose novel biological hypotheses supported by experimental work from the literature. Specifically, in Escherichia coli, we suggested binding site motifs for 6 non-traditional LexA protein binding sites; in Saccharomyces cerevisiae, we hypothesize 2 disparate mechanisms for novel binding sites of the Cse4p protein; and in Halobacterium sp. NRC-1, we discoverd subtle differences in a general transcription factor (GTF) binding site motif across several data sets. We suggest that small differences in our discovered motif could confer specificity for one or more homologous GTF proteins. We offer a free implementation of the MotifCatcher software package at http://www.bme.ucdavis.edu/facciotti/resources_data/software/. PMID:23181585

  8. 50 CFR 679.23 - Seasons.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... inshore, offshore catcher/processor, and mothership components, in the AI directed pollock fishery, and... motherships in the offshore component in the Bering Sea subarea, directed fishing for pollock in the AI...

  9. 50 CFR 679.23 - Seasons.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... inshore, offshore catcher/processor, and mothership components, in the AI directed pollock fishery, and... motherships in the offshore component in the Bering Sea subarea, directed fishing for pollock in the AI...

  10. Swift heavy-ions induced sputtering in BaF2 thin films

    NASA Astrophysics Data System (ADS)

    Pandey, Ratnesh K.; Kumar, Manvendra; Singh, Udai B.; Khan, Saif A.; Avasthi, D. K.; Pandey, Avinash C.

    2013-11-01

    In our present experiment a series of barium fluoride thin films of different thicknesses have been deposited by electron beam evaporation technique at room temperature on silicon substrates. The effect of film thickness on the electronic sputter yield of polycrystalline BaF2 thin films has been reported in the present work. Power law for sputtered species collected on catcher grids has also been reported for film of lowest thickness. Sputtering has been performed by 100 MeV Au+28 ions. Atomic force microscopy (AFM) has been done to check the surface morphology of pristine samples. Glancing angle X-ray diffraction (GAXRD) measurements show that the pristine films are polycrystalline in nature and the grain size increases with increase in film thickness. Rutherford backscattering spectrometry (RBS) of pristine as well as irradiated films was done to determine the areal concentration of Ba and F atoms in the films. A reduction in the sputter yield of BaF2 films with the increase in film thickness has been observed from RBS results. The thickness dependence sputtering is explained on the basis of thermal spike and the energy confinement of the ions in the smaller grains. Also transmission electron microscopy (TEM) of the catchers shows a size distribution of sputtered species with values of power law exponent 1/2 and 3/2 for two fluences 5 × 1011 and 1 × 1012 ions/cm2, respectively.

  11. Bio-mechanical assessment toward throwing and lifting process of i-LOCA (Innovative Lobster Catcher)

    NASA Astrophysics Data System (ADS)

    Sudiarno, A.; Dewi, D. S.; Putri, M. A.

    2018-04-01

    Indonesia is the country rich in marine resource, one of which is lobster. East java, one of Indonesian province, especially in Region of Gresik and Lamogan, has very huge potential of lobster. Current condition shown that lobster catch by the fisherman mostly depend on lucky factor, which the lobster unintentionally trapped in fisherman’s fish net. By using this mechanism, the number of lobster catch cannot be optimum. Previous researches have produced two versions of i-LOCA, Innovative Lobster Catcher, a special tool for catching the lobster. Although produce more lobster catch, second version of i-LOCA still needs to be scrutinized, one of that is bio-mechanical assessment. The second version of i-LOCA still has no tool to ease throwing and lifting it into the sea. This condition cause Musculoskeletal Disorder (MSD) toward the fisherman. This research perform bio-mechanical assessment toward throwing and lifting process in order to suggest improvement for i-LOCA as the third version. Based on body moment calculation, we found that throwing and lifting process of third version of i-LOCA, each was 3 times and 2 times better than second version of i-LOCA. Meanwhile, Rapid Entire Body Assessment (REBA) score of throwing and lifting process for third version of i-LOCA can be reduced by 5 points compared to second version of i-LOCA.

  12. 50 CFR 679.23 - Seasons.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Sea subarea by inshore, offshore catcher/processor, and mothership components, in the AI directed... for pollock in the AI directed pollock fishery, or directed fishing for CDQ pollock in the BSAI is...

  13. 50 CFR 679.23 - Seasons.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Sea subarea by inshore, offshore catcher/processor, and mothership components, in the AI directed... for pollock in the AI directed pollock fishery, or directed fishing for CDQ pollock in the BSAI is...

  14. Treatment of Facial Injury

    MedlinePlus

    ... should be replaced by carbon steel wire guards. Baseball A catcher should always wear a mask. Batting ... to aid breathing. Lacrosse Hard plastic helmets resembling baseball batting helmets, with wire cage face masks, are ...

  15. Advantages and limitations of remotely operated sea floor drill rigs

    NASA Astrophysics Data System (ADS)

    Freudenthal, T.; Smith, D. J.; Wefer, G.

    2009-04-01

    A variety of research targets in marine sciences including the investigation of gas hydrates, slope stability, alteration of oceanic crust, ore formation and palaeoclimate can be addressed by shallow drilling. However, drill ships are mostly used for deep drillings, both because the effort of building up a drill string from a drill ship to the deep sea floor is tremendous and control on drill bit pressure from a movable platform and a vibrating drill string is poor especially in the upper hundred meters. During the last decade a variety of remotely operated drill rigs have been developed, that are deployed on the sea bed and operated from standard research vessels. These developments include the BMS (Bentic Multicoring System, developed by Williamson and Associates, operated by the Japanese Mining Agency), the PROD (Portable Remotely Operated Drill, developed and operated by Benthic Geotech), the Rockdrill 2 (developed and operated by the British geological Survey) and the MeBo (German abbreviation for sea floor drill rig, developed and operated by Marum, University of Bremen). These drill rigs reach drilling depths between 15 and 100 m. For shallow drillings remotely operated drill rigs are a cost effective alternative to the services of drill ships and have the major advantage that the drilling operations are performed from a stable platform independent of any ship movements due to waves, wind or currents. Sea floor drill rigs can be deployed both in shallow waters and the deep sea. A careful site survey is required before deploying the sea floor drill rig. Slope gradient, small scale topography and soil strength are important factors when planning the deployment. The choice of drill bits and core catcher depend on the expected geology. The required drill tools are stored on one or two magazines on the drill rig. The MeBo is the only remotely operated drill rig world wide that can use wire line coring technique. This method is much faster than conventional drilling. It has the advantage that the drill string stays in the drilled hole during the entire drilling process and prevents the drilled hole from collapsing while the inner core barrels comprising the drilled core sections are hooked up inside the drill string using a wire.

  16. Google Earth-Based Grand Tours of the World's Ocean Basins and Marine Sediments

    NASA Astrophysics Data System (ADS)

    St John, K. K.; De Paor, D. G.; Suranovic, B.; Robinson, C.; Firth, J. V.; Rand, C.

    2016-12-01

    The GEODE project has produced a collection of Google Earth-based marine geology teaching resources that offer grand tours of the world's ocean basins and marine sediments. We use a map of oceanic crustal ages from Müller et al (2008; doi:10.1029/2007GC001743), and a set of emergent COLLADA models of IODP drill core data as a basis for a Google Earth tour introducing students to the world's ocean basins. Most students are familiar with basic seafloor spreading patterns but teaching experience suggests that few students have an appreciation of the number of abandoned ocean basins on Earth. Students also lack a valid visualization of the west Pacific where the oldest crust forms an isolated triangular patch and the ocean floor becomes younger towards the subduction zones. Our tour links geographic locations to mechanical models of rifting, seafloor spreading, subduction, and transform faulting. Google Earth's built-in earthquake and volcano data are related to ocean floor patterns. Marine sediments are explored in a Google Earth tour that draws on exemplary IODP core samples of a range of sediment types (e.g., turbidites, diatom ooze). Information and links are used to connect location to sediment type. This tour compliments a physical core kit of core catcher sections that can be employed for classroom instruction (geode.net/marine-core-kit/). At a larger scale, we use data from IMLGS to explore the distribution of the marine sediments types in the modern global ocean. More than 2,500 sites are plotted with access to original data. Students are guided to compare modern "type sections" of primary marine sediment lithologies, as well as examine site transects to address questions of bathymetric setting, ocean circulation, chemistry (e.g., CCD), and bioproductivity as influences on modern seafloor sedimentation. KMZ files, student exercises, and tips for instructors are available at geode.net/exploring-marine-sediments-using-google-earth.

  17. In-flight performances of the PAMELA satellite experiment

    NASA Astrophysics Data System (ADS)

    Papini, P.; Adriani, O.; Ambriola, M.; Barbarino, G. C.; Basili, A.; Bazilevskaja, G. A.; Boezio, M.; Bogomolov, E. A.; Bonechi, L.; Bongi, M.; Bongiorno, L.; Bonvicini, V.; Bruno, A.; Cafagna, F.; Campana, D.; Carlson, P.; Casolino, M.; Castellini, G.; Conrad, J.; De Marzo, C.; De Pascale, M. P.; De Rosa, G.; Di Felice, V.; Fedele, D.; Galper, A. M.; Hofverberg, P.; Koldashov, S. V.; Krutkov, S. Yu.; Kvashnin, A. N.; Lund, J.; Lundquist, J.; Maksumov, O.; Malvezzi, V.; Marcelli, L.; Menn, W.; Mikhailov, V. V.; Minori, M.; Misin, S.; Mocchiutti, E.; Morselli, A.; Nikonov, N. N.; Orsi, S.; Osteria, G.; Pearce, M.; Picozza, P.; Ricci, M.; Ricciarini, S. B.; Runtso, M. F.; Russo, S.; Simon, M.; Sparvoli, R.; Spillantini, P.; Stozhkov, Yu. I.; Taddei, E.; Vacchi, A.; Vannuccini, E.; Voronov, S. A.; Yurkin, Y. T.; Zampa, G.; Zampa, N.; Zverev, V. G.

    2008-04-01

    PAMELA is a satellite-borne experiment designed to study with great accuracy charged particles in the cosmic radiation with a particular focus on antiparticles. The experiment, housed on board the Russian Resurs-DK1 satellite, was launched on June 15, 2006 in a 350 × 600 km orbit with an inclination of 70∘. The apparatus comprises a time-of-flight system, a silicon-microstrip magnetic spectrometer, a silicon-tungsten electromagnetic calorimeter, an anticoincidence system, a shower tail catcher scintillator and a neutron detector. The combination of these devices allows charged particle identification over a wide energy range. In this work, the detector design is reviewed and the in-orbit performances in the first months after the launch are presented.

  18. Performance and Return to Sport After Tommy John Surgery Among Major League Baseball Position Players.

    PubMed

    Jack, Robert A; Burn, Matthew B; Sochacki, Kyle R; McCulloch, Patrick C; Lintner, David M; Harris, Joshua D

    2018-06-01

    The anterior bundle of the medial ulnar collateral ligament (UCL) is the primary restraint to valgus stress at the elbow and is often injured among overhead throwing athletes. Despite prevention strategies, injuries to the elbow UCL are on the rise. To determine (1) the return-to-sport (RTS) rate of Major League Baseball (MLB) position players after elbow medial UCL reconstruction, (2) postoperative career length and games per season, (3) pre- and postoperative performance, (4) postoperative performance versus matched control players, and (5) whether position players changed positions after UCL reconstruction. Cohort study; Level of evidence, 3. MLB players who underwent elbow UCL reconstruction were identified (cases). Demographic and performance data were collected for each player. Matched controls were identified. RTS in MLB was defined as playing in at least 1 MLB game after UCL reconstruction. Comparisons between case and control groups and pre- and postoperative time points were made via paired samples Student t tests. Thirty-three players (34 surgical procedures) were identified with a mean ± SD age of 30.2 ± 4.2 years and a mean experience in the MLB of 6.3 ± 3.9 years at the time of surgery. Twenty-eight players (84.8%) were able to RTS in MLB at a mean 336.9 ± 121.8 days. However, players ≥30 years old demonstrated a significantly lower RTS rate (53.3%) than players <30 years old (89.4%; P < .05). Catchers had a significantly shorter postoperative career length (2.8 ± 1.8 years) versus matched controls (6.1 ± 1.9 years; P < .05). Outfielders had a significantly lower wins above replacement postoperatively (0.8 ± 0.7) versus preoperatively (1.5 ± 1.1; P < .05). There were no performance differences between cases and matched controls. Twelve players (48%) returned to a different position postoperatively. The RTS rate for MLB position players after elbow UCL reconstruction is similar to that of pitchers. Catchers had a significantly shorter career length than that of matched controls. Outfielders performed worse postoperatively versus preoperatively. There is a high rate of position change after Tommy John surgery for infielders and outfielders.

  19. Inventing the Wave Catchers.

    ERIC Educational Resources Information Center

    Fisher, Arthur

    1983-01-01

    Physicists and engineers advance the state of several arts in the design of gravitational-wave detection equipment. Provides background information and discusses the equipment (including laser interferometer), its use, and results of several experimental studies. (JN)

  20. Observation of ZnS nanoparticles sputtered from ZnS films under 2 MeV Au irradiation

    NASA Astrophysics Data System (ADS)

    Kuiri, P. K.; Joseph, B.; Ghatak, J.; Lenka, H. P.; Sahu, G.; Acharya, B. S.; Mahapatra, D. P.

    2006-07-01

    ZnS nanoparticles have been observed on catcher foils due to 2 MeV Au ion irradiation of ZnS films thermally evaporated on Si(1 0 0) substrates. The structure and size distribution of nanoclusters collected were studied using transmission electron microscopy for irradiation fluences in the range of 1 × 10 11-1 × 10 15 ions cm -2. The nanoclusters were found to have a hexagonal wurtzite structure. Optical absorption measurements on similarly deposited ZnS on silica glass indicate the film to be also composed of hexagonal wurtzite ZnS. Based on this and available data we argue that the observed nanoparticles on the catcher foils are the results of shock waves induced emission of material chunks with the same atomic coordination as in the target.

  1. Risk factors for shoulder and elbow pain in youth baseball players.

    PubMed

    Matsuura, Tetsuya; Iwame, Toshiyuki; Suzue, Naoto; Arisawa, Kokichi; Sairyo, Koichi

    2017-05-01

    This study sought to quantify the 1-year cumulative incidence of shoulder and elbow pain among youth baseball players and identify risk factors associated with the occurrence of shoulder and elbow pain. In total, 900 youth baseball players (aged 7-11 years) were enrolled in a 1-year prospective follow-up study. One year later, the players were asked whether they had experienced episodes of shoulder or elbow pain and the following risk factors for such pain were investigated: age, position, length of baseball experience, training hours per week, and history of shoulder or elbow pain. Data for the groups with and without shoulder or elbow pain were analyzed using multivariate logistic regression models. Episodes of shoulder pain were reported by 18.3% of players and episodes of elbow pain were reported by 35.2% of players. Multivariate analysis showed that shoulder pain was associated with pitcher position, catcher position, longer training hours per week, and history of shoulder and elbow pain, and that elbow pain was associated with age, pitcher position, catcher position, longer training hours per week, and history of elbow pain. Length of baseball experience was not associated with shoulder or elbow pain. History of elbow pain, pitcher position, catcher position, and longer training hours per week were associated with both types of pain. History of shoulder pain was associated with shoulder pain but not elbow pain. Age was associated with elbow pain but not shoulder pain.

  2. 50 CFR 660.160 - Catcher/processor (C/P) Coop Program.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... not be accepted unless it includes all of the required information; the descriptive items listed in... deployment by the completion of the electronic vessel and/or processor survey(s); and (E) Immediately report...

  3. 50 CFR 660.160 - Catcher/processor (C/P) Coop Program.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... not be accepted unless it includes all of the required information; the descriptive items listed in... deployment by the completion of the electronic vessel and/or processor survey(s); and (E) Immediately report...

  4. 50 CFR 660.160 - Catcher/processor (C/P) Coop Program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... not be accepted unless it includes all of the required information; the descriptive items listed in... the completion of the electronic vessel and/or processor survey(s); and (E) Immediately report to the...

  5. 50 CFR 660.160 - Catcher/processor (C/P) Coop Program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... information; the descriptive items listed in this paragraph appear to meet the stated purpose; and information... deployment by the completion of the electronic vessel and/or processor survey(s); and (E) Immediately report...

  6. Simulated characteristics of the DEGAS γ-detector array

    NASA Astrophysics Data System (ADS)

    Li, G. S.; Lizarazo, C.; Gerl, J.; Kojouharov, I.; Schaffner, H.; Górska, M.; Pietralla, N.; Saha, S.; Liu, M. L.; Wang, J. G.

    2018-05-01

    The performance of the novel HPGe-Cluster array DEGAS to be used at FAIR has been studied through GEANT4 simulations using accurate geometries of most of the detector components. The simulation framework has been tested by comparing experimental data of various detector setups. The study showed that the DEGAS system could provide a clear improvement of the photo-peak efficiency compared to the previous RISING array. In addition, the active BGO Back-catcher could greatly enhance the background suppression capability. The add-back analysis revealed that even at a γ multiplicity of six the sensitivity is improved by adding back the energy depositions of the neighboring Ge crystals.

  7. 75 FR 10757 - Proposed Information Collection; Comment Request; Alaska Region Amendment 80 Permits and Reports

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... facilitates the formation of harvesting cooperatives in the head-and-gut trawl catcher/processor sector... catch, improved retention, improved utilization, and improved economic health of the head-and-gut trawl...

  8. 50 CFR 660.150 - Mothership (MS) Coop Program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) Accumulation limits—(i) MS permit usage limit. No person who owns an MS permit(s) may register the MS permit(s... permit owner complies with the accumulation limits. (ii) Catcher vessel usage limit. No vessel may catch...

  9. The Fogging Method with Variable of Nozle Diameter as the Mitigation Alternative for Spreading the Dust of Cement

    NASA Astrophysics Data System (ADS)

    Purwanta, J.; Marnoto, T.; Setyono, P.; Ramelan, A. H.

    2018-03-01

    The cement plant impacts on the lives of people around the factory site, one of them on the air quality, especially dust. Cement plant has made various efforts to mitigate dust generated, but the reality on the ground is still a lot of dust flying around either of the cement factory chimneys and transportation. The purpose of this study was to find the optimum condition of nozle diameter from the cement dust catcher, for mitigation the dust spread to around the cement plant. This study uses research methods such as collecting secondary data which includes data intensity rainfall, the average long rains, wind speed and direction as well as data quality monitoring dust around PT. Semen Gresik (Persero) Tbk. Tuban plant. To determine the wind direction propensity models, use a soft Windrose file. To determine the impact on the spread of dust into the environment using secondary data monitoring air quality. Results of the study is that the mitigation of dust around the cement plant is influenced by natural factors, namely the tendency of wind direction, rainfall and rainy days, and the rate of dust emission from the chimney. I try for operate the cement dust catcher with variable of nozle diameter. Finally, I find the optimum condition of nozle diameter for cement dust catcher is 1.40 mm, with line equation is y = 149.09.e 1.6237.x and error 5%. In that condition, nozle can make the fog with a good quality and it can catch the cement dust well.

  10. Sizing of "Mother Ship and Catcher" Missions for LEO Small Debris and for GEO Large Object Capture

    NASA Technical Reports Server (NTRS)

    Bacon, John B.

    2009-01-01

    Most LEO debris lies in a limited number of inclination "bands" associated with specific useful orbits. Objects in such narrow inclination bands have all possible Right Ascensions of Ascending Node (RAANs), creating a different orbit plane for nearly every piece of debris. However, a low-orbiting satellite will always phase in RAAN faster than debris objects in higher orbits at the same inclination, potentially solving the problem. Such a low-orbiting base can serve as a "mother ship" that can tend and then send small, disposable common individual catcher/deboost devices--one for each debris object--as the facility drifts into the same RAAN as each higher object. The dV necessary to catch highly-eccentric orbit debris in the center of the band alternatively allows the capture of less-eccentric debris in a wider inclination range around the center. It is demonstrated that most LEO hazardous debris can be removed from orbit in three years, using a single LEO launch of one mother ship--with its onboard magazine of freeflying low-tech catchers--into each of ten identified bands, with second or potentially third launches into only the three highest-inclination bands. The nearly 1000 objects near the geostationary orbit present special challenges in mass, maneuverability, and ultimate disposal options, leading to a dramatically different architecture and technology suite than the LEO solution. It is shown that the entire population of near-GEO derelict objects can be gathered and tethered together within a 3 year period for future scrap-yard operations using achievable technologies and only two earth launches.

  11. Precooking as a Control for Histamine Formation during the Processing of Tuna: An Industrial Process Validation.

    PubMed

    Adams, Farzana; Nolte, Fred; Colton, James; De Beer, John; Weddig, Lisa

    2018-02-23

    An experiment to validate the precooking of tuna as a control for histamine formation was carried out at a commercial tuna factory in Fiji. Albacore tuna ( Thunnus alalunga) were brought on board long-line catcher vessels alive, immediately chilled but never frozen, and delivered to an on-shore facility within 3 to 13 days. These fish were then allowed to spoil at 25 to 30°C for 21 to 25 h to induce high levels of histamine (>50 ppm), as a simulation of "worst-case" postharvest conditions, and subsequently frozen. These spoiled fish later were thawed normally and then precooked at a commercial tuna processing facility to a target maximum core temperature of 60°C. These tuna were then held at ambient temperatures of 19 to 37°C for up to 30 h, and samples were collected every 6 h for histamine analysis. After precooking, no further histamine formation was observed for 12 to 18 h, indicating that a conservative minimum core temperature of 60°C pauses subsequent histamine formation for 12 to 18 h. Using the maximum core temperature of 60°C provided a challenge study to validate a recommended minimum core temperature of 60°C, and 12 to 18 h was sufficient to convert precooked tuna into frozen loins or canned tuna. This industrial-scale process validation study provides support at a high confidence level for the preventive histamine control associated with precooking. This study was conducted with tuna deliberately allowed to spoil to induce high concentrations of histamine and histamine-forming capacity and to fail standard organoleptic evaluations, and the critical limits for precooking were validated. Thus, these limits can be used in a hazard analysis critical control point plan in which precooking is identified as a critical control point.

  12. Longline Catcher Processor Subsector Single Fishery Cooperative Act

    THOMAS, 111th Congress

    Rep. Larsen, Rick [D-WA-2

    2009-10-22

    House - 07/27/2010 Subcommittee Hearings Held. (All Actions) Notes: For further action, see S.1609, which became Public Law 111-335 on 12/22/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  13. 78 FR 54629 - Fisheries of the Exclusive Economic Zone Off Alaska; American Fisheries Act, Amendment 80 Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-05

    ... Alaska Community Development Quota (CDQ) Program, and the hook-and-line catcher/processor (freezer... plans to present a draft analysis of the potential effects of cost recovery fee programs to the Council...

  14. A novel method for simultaneous purification and immobilization of a xylanase-lichenase chimera via SpyTag/SpyCatcher spontaneous reaction.

    PubMed

    Lin, Yuanqing; Jin, Wenhui; Wang, Jindan; Cai, Zhengwen; Wu, Shuyu; Zhang, Guangya

    2018-08-01

    We generated a bifunctional enzyme chimera containing the xylanase and lichenase coupled with SpyTag between them. Meanwhile, we generated another chimera containing SpyCatcher and elastin-like polypeptides (ELPs). As ELPs could bond to the xylanase-lichenase chimera through SpyTag/SpyCatcher spontaneous reaction in mild condition, which would lead to the formation of a 3-arm star multifunctional chimera. We purified the xylanase-lichenase by the non-chromatographic purification tag of ELPs. Interestingly, 57.5% of the xylanase and 47.2% of the lichenase in chimera self-assembled into insoluble active particles during the process of purification, which could serve as immobilized bifunctional enzymes. Notably, the immobilized chimera xylanase-lichenase showed a remarkable stability even after 10 reaction cycles, which retained around 56% (lichenase) and 44% (xylanase) of their initial activities, respectively. Moreover, the enhanced thermostability of the immobilized enzymes was also achieved. After incubating at 60 °C for 60 min, the residual activity of the immobilized lichenase was 35%, while the free one was only 24%. Unexpectedly, the free xylanase almost lost its activity when incubated at 55 °C for 60 min, whereas the immobilized xylanase retained 10% of its activity. However, the catalytic efficiency (k cat /K m ) of the free xylanase was 1.7-fold higher than the immobilized one, while the free lichenase was 1.1-fold higher than the immobilized one. This is among the first known reports that two enzymes are purified and immobilized in one-step. This novel strategy is easy to scale up and may meet the demands of biofuel industry. It would have great potentials in other biotechnological fields, such as the multifunctional biomaterials systems. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. [Investigation surrounding a fatal case of yellow fever in Côte d'Ivoire in 1999].

    PubMed

    Akoua-Koffi, C; Diarrassouba, S; Bénié, V B; Ngbichi, J M; Bozoua, T; Bosson, A; Akran, V; Carnevale, P; Ehouman, A

    2001-08-01

    Côte d'Ivoire is an endemic country for yellow fever, but no case was officially notified in recent years. In July 1999, however, one fatal case was reported. A German citizen was infected in the national park of Comoe, in the north eastern area of the country. In order to evaluate the extent of amaril virus circulation and the risk for local people, a virological, entomological and epidemiological investigation was carried out by the ministry of health, the OCCGE, the Côte d'Ivoire Pasteur Institute (IPCI) and the World Health Organisation in the area where the fatal case had been staying. 18 suspected and 24 confirmed mosquito catchers were identified by interview and a blood specimen was collected from each of them. In addition, 159 batches of mosquitoes from which 94 batches of potential vectors were collected; among the suspected cases, 22% were immunised against yellow fever. Serological and virological analyses were made at IPCI and the Paris Pasteur Institute by ELISA technique and isolation on cells cultures and newborn mice. All the suspicious sera and 87.5% of the catchers were positive for IgG anti-amaril virus. One catcher's serum was positive for IgM anti-amaril virus. 11 suspected sera were positive for IgG anti-dengue virus with 1 positive for IgM. 1 strain of amaril virus and 3 strains of Zika virus were isolated from mosquitoes at IPCI and confirmed by CRORA in Dakar. These results indicated that there is a yellow fever and dengue virus are prevalent among the human and vector populations in the study area. Preventive measures must be adopted to protect human beings at risk for amaril infection.

  16. Testing the Rapid Detection Capabilities of the Quake-Catcher Network

    NASA Astrophysics Data System (ADS)

    Chung, A. I.; Cochran, E.; Yildirim, B.; Christensen, C. M.; Kaiser, A. E.; Lawrence, J. F.

    2013-12-01

    The Quake-Catcher Network (QCN) is a versatile network of MEMS accelerometers that are used in combination with distributed volunteer computing to detect earthquakes around the world. Using a dense network of QCN stations installed in Christchurch, New Zealand after the 2010 M7.1 Darfield earthquake, hundreds of events in the Christchurch area were detected and rapidly characterized. When the M6.3 Christchurch event occurred on 21 February 2011, QCN sensors recorded the event and calculated its magnitude, location, and created a map of estimated shaking intensity within 7 seconds of the earthquake origin time. Successive iterations improved the calculations and, within 24 seconds of the earthquake, magnitude and location values were calculated that were comparable to those provided by GeoNet. We have rigorously tested numerous methods to create a working magnitude scaling relationship. In this presentation, we show a drastic improvement in the magnitude estimates using the maximum acceleration at the time of the first trigger and updated ground accelerations from one to three seconds after the initial trigger. 75% of the events rapidly detected and characterized by QCN are within 0.5 magnitude units of the official GeoNet reported magnitude values, with 95% of the events within 1 magnitude unit. We also test the QCN detection algorithms using higher quality data from the SCSN network in Southern California. We examine a dataset of M5 and larger earthquakes that occurred since 1995. We present the performance of the QCN algorithms for this dataset, including time to detection as well as location and magnitude accuracy.

  17. 75 FR 48298 - Groundfish Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea/Aleutian Islands Crab...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-10

    ... weight of crab but also the weight of packaging, pallets, and glaze. While deductions for these items can... number of active crab catcher/processors changes annually. As noted above, from four to six vessels have...

  18. 50 CFR 679.4 - Permits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... section (ii) CDQ Halibut (A) Halibut permit Specified fishing year Paragraph (e) of this section (B) Halibut hired master permit Specified fishing year Paragraph (e) of this section (iii) AFA: (A) Catcher... (l) of this section (E) Inshore cooperative Calendar year Paragraph (l) of this section (F...

  19. Catcher’s Mitt Final Report

    DTIC Science & Technology

    2011-08-30

    launch systems and procedures do not conform to and spacecraft (both satellites and rocket bodies) are not properly disposed of in accordance with...Concepts of this class include the use of whipple shields, aerogel panels or structures, large multi-hulled spheres, and layered open-cell foam

  20. 50 CFR 660.150 - Mothership (MS) Coop Program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-allocations. [Reserved] (i) Mothership catcher vessel catch history assignments. [Reserved] (ii) Annual coop...-delivered within normal business hours no later than November 1, 2010. If an applicant fails to submit a...-filled application where NMFS has preliminarily determined the processing history that may qualify the...

  1. 50 CFR 679.50 - Groundfish Observer Program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... following: (A) Identification of the management, organizational structure, and ownership structure of the.../processors. A catcher/processor will be assigned to a fishery category based on the retained groundfish catch... in Federal waters will be assigned to a fishery category based on the retained groundfish catch...

  2. 78 FR 15705 - Proposed Information Collection; Comment Request; American Fisheries Act (AFA): Permits

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-12

    ... 13, 2013. ADDRESSES: Direct all written comments to Jennifer Jessup, Departmental Paperwork Clearance... allocations to eligible entities representing the catcher/processor sector, the mothership sector, inshore cooperatives, and Community Development Quota (CDQ) groups. Transferable allocations provide the pollock fleet...

  3. 50 CFR 679.22 - Closures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Management Measures... around Cape Pierce (58°33′ N. lat., 161°43′ W. long.). (5) Catcher Vessel Operational Area (CVOA)—(i...

  4. Beamed neutron emission driven by laser accelerated light ions

    NASA Astrophysics Data System (ADS)

    Kar, S.; Green, A.; Ahmed, H.; Alejo, A.; Robinson, A. P. L.; Cerchez, M.; Clarke, R.; Doria, D.; Dorkings, S.; Fernandez, J.; Mirfayzi, S. R.; McKenna, P.; Naughton, K.; Neely, D.; Norreys, P.; Peth, C.; Powell, H.; Ruiz, J. A.; Swain, J.; Willi, O.; Borghesi, M.

    2016-05-01

    Highly anisotropic, beam-like neutron emission with peak flux of the order of 109 n/sr was obtained from light nuclei reactions in a pitcher-catcher scenario, by employing MeV ions driven by a sub-petawatt laser. The spatial profile of the neutron beam, fully captured for the first time by employing a CR39 nuclear track detector, shows a FWHM divergence angle of ˜ 70^\\circ , with a peak flux nearly an order of magnitude higher than the isotropic component elsewhere. The observed beamed flux of neutrons is highly favourable for a wide range of applications, and indeed for further transport and moderation to thermal energies. A systematic study employing various combinations of pitcher-catcher materials indicates the dominant reactions being d(p, n+p)1H and d(d,n)3He. Albeit insufficient cross-section data are available for modelling, the observed anisotropy in the neutrons’ spatial and spectral profiles is most likely related to the directionality and high energy of the projectile ions.

  5. 50 CFR 679.7 - Prohibitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and the collection of scientific data or biological samples from the salmon has been completed. (B... scientific data or biological samples from the previous haul. (5) For the operator of a catcher vessel, to... count of salmon and the collection of scientific data or biological samples from the previous offload...

  6. 50 CFR 679.7 - Prohibitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... collection of scientific data or biological samples from the salmon has been completed. (B) Non-Chinook... scientific data or biological samples from the previous haul. (5) For the operator of a catcher vessel, to... count of salmon and the collection of scientific data or biological samples from the previous offload...

  7. Yes, Holden Should Read These Books.

    ERIC Educational Resources Information Center

    Lisman, C. David

    1989-01-01

    Counters Donald Barr's assertion that works such as J. D. Salinger's "Catcher in the Rye" and William Golding's "Lord of the Flies" are unfit reading material for adolescents ("Should Holden Caufield Read These Books?""New York Times Book Review," May 4, 1986). Shows how these works address adolescents'…

  8. 50 CFR 660.160 - Catcher/processor (C/P) Coop Program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Coop Program, or the Shorebased IFQ Program. As determined necessary by the Regional Administrator... combination. [Reserved] (4) Appeals. [Reserved] (5) Fees. The Regional Administrator is authorized to charge... entry permit owner in the NMFS permit database. (ii) Qualifying criteria for C/P endorsement. In order...

  9. Bubble Shuttle: A newly discovered transport mechanism, which transfers microorganisms from the sediment into the water column

    NASA Astrophysics Data System (ADS)

    Schmale, O.; Stolle, C.; Leifer, I.; Schneider von Deimling, J.; Kiesslich, K.; Krause, S.; Frahm, A.; Treude, T.

    2013-12-01

    The diversity and abundance of methanotrophic microorganisms is well studied in the aquatic environment, indicating their importance in biogeochemical cycling of methane in the sediment and the water column. However, whether methanotrophs are distinct populations in these habitats or are exchanged between benthic and pelagic environments, remains an open question. Therefore, field studies were conducted at the 'Rostocker Seep' site (Coal Oil Point seep area, California, USA) to test our hypothesis that methane-oxidizing microorganisms can be transported by gas bubbles from the sediment into the water column. The natural methane emanating location 'Rostocker Seep' showed a strong surface water oversaturation in methane with respect to the atmospheric equilibrium. Catalyzed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) analyzes were performed to determine the abundance of aerobic and anaerobic methanotrophic microorganisms. Aerobic methane oxidizing bacteria were detected in the sediment and the water column, whereas anaerobic methanotrophs were detected exclusively in the sediment. The key device of the project was the newly developed "Bubble Catcher" used to collect naturally emanating gas bubbles at the sea floor together with particles attached to the bubble surface rim. Bubble Catcher experiments were carried out directly above a natural bubble release spot and on a reference site at which artificially released gas bubbles were caught, which had no contact with the sediment. CARD-FISH analyzes showed that aerobic methane oxidizing bacteria were transported by gas bubbles from the sediment into the water column. In contrast anaerobic methanotrophs were not detected in the bubble catcher. Further results indicate that this newly discovered Bubble Shuttle transport mechanism might influence the distribution pattern of methanotrophic microorganisms in the water column and even at the air-sea interface. Methane seep areas are often characterized by an elevated abundance of methane-oxidizing microorganisms, which consume a considerable amount of methane before it escapes into the atmosphere. Based on our study we hypothesize that the Bubble Shuttle transport mechanism contributes to this pelagic methane sink by a sediment-water column transfer of methane oxidizing microorganisms. Furthermore, this Bubble Shuttle may influence the methanotrophic community in the water column after massive short-term submarine inputs of methane (e.g. release of methane from bore holes). Especially in deep-sea regions, where the abundance of methane oxidizing microorganisms in the water column is low in general, Bubble Shuttle may inject a relevant amount of methane oxidizing microorganisms into the water column during massive inputs, supporting indirectly the turnover of this greenhouse active trace gas in the submarine environment.

  10. 50 CFR 679.81 - Rockfish Program annual harvester privileges.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) Maximum retainable amount (MRA) limits—(1) Rockfish cooperative. A vessel assigned to a rockfish... those species as established in Table 10 to this part. (4) Maximum retainable amount (MRA) calculation and limits—catcher vessels. (i) The MRA for an incidental catch species for vessels fishing under the...

  11. 50 CFR 679.81 - Rockfish Program annual harvester privileges.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) Maximum retainable amount (MRA) limits—(1) Rockfish cooperative. A vessel assigned to a rockfish... those species as established in Table 10 to this part. (4) Maximum retainable amount (MRA) calculation and limits—catcher vessels. (i) The MRA for an incidental catch species for vessels fishing under the...

  12. 50 CFR 679.81 - Rockfish Program annual harvester privileges.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) Maximum retainable amount (MRA) limits—(1) Rockfish cooperative. A vessel assigned to a rockfish... those species as established in Table 10 to this part. (4) Maximum retainable amount (MRA) calculation and limits—catcher vessels. (i) The MRA for an incidental catch species for vessels fishing under the...

  13. Dream Catchers: "Margin Call," "Boss," and Climbing the Beanstalk

    ERIC Educational Resources Information Center

    Beck, Bernard

    2012-01-01

    Two recent popular entertainments, "Margin Call" (Barnum, Dodson, Jenckes, Moosa, Quinto & Chandor, 2011) and "Boss" (Safinia, 2011), depict powerful and successful groups of bosses confronting sudden, extreme threats. They are forced to react quickly and sacrifice important values to achieve survival of their organizations. In these emergencies,…

  14. J.D., D.B., Sonny, Sunny, and Holden.

    ERIC Educational Resources Information Center

    Ducharme, Edward R.

    1968-01-01

    Several people have tried, unsuccessfully, to learn the facts about J. D. Salinger's life. The little information available from secondary sources about Salinger indicates that "The Catcher in the Rye" has autobiographical elements. Salinger's life parallels Holden's fictional adventures in that Salinger (1) was born and reared through…

  15. 50 CFR 660.55 - Allocations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... fishery allocations. Prior to the setting of fishery allocations, the TAC, ACL, or ACT when specified, is... in the non-groundfish fishery that is deducted from the ACL or ACT when specified. (2) The commercial... from the TAC, OY, ACL, or ACT when specified. For the catcher/processor and mothership sectors of the...

  16. 50 CFR 660.55 - Allocations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... fishery allocations. Prior to the setting of fishery allocations, the TAC, ACL, or ACT when specified, is... in the non-groundfish fishery that is deducted from the ACL or ACT when specified. (2) The commercial... from the TAC, OY, ACL, or ACT when specified. For the catcher/processor and mothership sectors of the...

  17. 76 FR 12884 - Groundfish Fisheries of the Exclusive Economic Zone Off Alaska; American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-09

    ... (the ``directed fishing allowance'') among the AFA inshore sector (50 percent), the AFA catcher/processor sector (40 percent), and the AFA mothership sector (10 percent). The AFA allowed for development of pollock fishing cooperatives in the non-CDQ sectors. Thirteen cooperatives were developed under...

  18. "Being" a Critical Multicultural Pedagogue in the Art Education Classroom

    ERIC Educational Resources Information Center

    Acuff, Joni Boyd

    2018-01-01

    Art educators continuously struggle to understand what multiculturalism "looks like" in the art classroom. This has resulted in multicultural art education becoming superficial, in which art teachers guide students through art projects like creating African masks, Native American dream catchers, Aboriginal totems, and sand paintings, all…

  19. 50 CFR 679.28 - Equipment and operational requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... estimates, vessel monitoring system hardware, catch monitoring and control plan, and catcher vessel... container to store salmon must be located adjacent to the observer sampling station; (ii) All salmon stored in the container must remain in view of the observer at the observer sampling station at all times...

  20. Holden and Company: A Separate Piece (of the Curriculum).

    ERIC Educational Resources Information Center

    Brown, Joanne

    An instructor of an adolescent literature course wanted to give the students an opportunity to study some novels not specifically written for an adolescent audience. Examples of such novels were: Harper Lee's "To Kill a Mockingbird," J.D. Salinger's "Catcher in the Rye," and Jamaica Kincaid's "Annie John." Including…

  1. A Field Guide to Common Educator Birds.

    ERIC Educational Resources Information Center

    Smock, Judith N.

    1990-01-01

    Teaching may be for the birds, but many educator birds have been abandoning the field of late for downier nests. Several species still remain, including the crown-tufted superintendent bird, the red-throated assistant superintendent bird, the crested fly-catcher principal bird, the exotic scenery bird, the roadrunner psychologist bird, and the…

  2. Literary Maps for Young Adult Literature.

    ERIC Educational Resources Information Center

    Snodgrass, Mary Ellen

    The activities presented in this handbook are designed to help students envision the locations and landmarks of sites along journeys described in popular young adult literature (e.g., "The Adventures of Huckleberry Finn,""Born Free,""The Call of the Wild,""Catcher in the Rye,""I Know Why the Caged Bird…

  3. The Red Atrapa Sismos (Quake Catcher Network in Mexico): assessing performance during large and damaging earthquakes.

    USGS Publications Warehouse

    Dominguez, Luis A.; Yildirim, Battalgazi; Husker, Allen L.; Cochran, Elizabeth S.; Christensen, Carl; Cruz-Atienza, Victor M.

    2015-01-01

    Each volunteer computer monitors ground motion and communicates using the Berkeley Open Infrastructure for Network Computing (BOINC, Anderson, 2004). Using a standard short‐term average, long‐term average (STLA) algorithm (Earle and Shearer, 1994; Cochran, Lawrence, Christensen, Chung, 2009; Cochran, Lawrence, Christensen, and Jakka, 2009), volunteer computer and sensor systems detect abrupt changes in the acceleration recordings. Each time a possible trigger signal is declared, a small package of information containing sensor and ground‐motion information is streamed to one of the QCN servers (Chung et al., 2011). Trigger signals, correlated in space and time, are then processed by the QCN server to look for potential earthquakes.

  4. Photoacoustic design parameter optimization for deep tissue imaging by numerical simulation

    NASA Astrophysics Data System (ADS)

    Wang, Zhaohui; Ha, Seunghan; Kim, Kang

    2012-02-01

    A new design of light illumination scheme for deep tissue photoacoustic (PA) imaging, a light catcher, is proposed and evaluated by in silico simulation. Finite element (FE)-based numerical simulation model was developed for photoacoustic (PA) imaging in soft tissues. In this in silico simulation using a commercially available FE simulation package (COMSOL MultiphysicsTM, COMSOL Inc., USA), a short-pulsed laser point source (pulse length of 5 ns) was placed in water on the tissue surface. Overall, four sets of simulation models were integrated together to describe the physical principles of PA imaging. Light energy transmission through background tissues from the laser source to the target tissue or contrast agent was described by diffusion equation. The absorption of light energy and its conversion to heat by target tissue or contrast agent was modeled using bio-heat equation. The heat then causes the stress and strain change, and the resulting displacement of the target surface produces acoustic pressure. The created wide-band acoustic pressure will propagate through background tissues to the ultrasound detector, which is governed by acoustic wave equation. Both optical and acoustical parameters in soft tissues such as scattering, absorption, and attenuation are incorporated in tissue models. PA imaging performance with different design parameters of the laser source and energy delivery scheme was investigated. The laser light illumination into the deep tissues can be significantly improved by up to 134.8% increase of fluence rate by introducing a designed compact light catcher with highly reflecting inner surface surrounding the light source. The optimized parameters through this simulation will guide the design of PA system for deep tissue imaging, and help to form the base protocols of experimental evaluations in vitro and in vivo.

  5. Electronic sputtering of LiF, CaF2, LaF3 and UF4 with 197 MeV Au ions. Is the stoichiometry of atom emission preserved?

    NASA Astrophysics Data System (ADS)

    Toulemonde, M.; Assmann, W.; Muller, D.; Trautmann, C.

    2017-09-01

    Sputtering experiments with swift heavy ions in the electronic energy loss regime were performed by using the catcher technique in combination with elastic recoil detection analysis. Four different fluoride targets, LiF, CaF2, LaF3 and UF4 were irradiated in the electronic energy loss regime using 197 MeV Au ions. The angular distribution of particles sputtered from the surface of freshly cleaved LiF and CaF2 single crystals is composed of a broad cosine distribution superimposed by a jet-like peak that appears perpendicular to the surface independent of the angle of beam incidence. For LiF, the particle emission in the entire angular distribution (jet plus broad cosine component) is stoichiometric, whereas for CaF2 the ratio of the sputtered F to Ca particles is at large angles by a factor of two smaller than the stoichiometry of the crystal. For single crystalline LaF3 no jet component is observed and the angular distribution is non-stoichiometric with the number of sputtered F particles being slightly larger than the number of sputtered La particles. In the case of UF4, the target was polycrystalline and had a much rougher surface compared to cleaved crystals. This destroys the appearance of a possible jet component leading to a broad angular distribution. The ratio of sputtered U atoms compared to F atoms is in the order of 1-2, i.e. the number of collected particles on the catcher is also non-stoichiometric. Such unlike behavior of particles sputtered from different fluoride crystals creates new questions.

  6. 75 FR 53379 - Fisheries off West Coast States; Pacific Coast Groundfish Fishery Management Plan; Amendments 20...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-31

    ... same time, the design of this program is mindful of confidentiality concerns and the compliance burden... groundfish trawl fishery. To meet these needs, NMFS has designed mandatory survey questionnaires for catcher... plant. The data collection would be done on an annual basis, with specific questionnaires designed for...

  7. 78 FR 40103 - Proposed Information Collection; Comment Request; Amendment 80 Economic Data Report for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ... Collection; Comment Request; Amendment 80 Economic Data Report for the Catcher/Processor Non-AFA Trawl Sector.../processor sector. The Amendment 80 economic data report (EDR) collects cost, revenue, ownership, and... Program. The purpose of the EDR is to understand the economic effects of the Amendment 80 program on...

  8. 50 CFR 679.82 - Rockfish Program use caps and sideboard limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... not participate in directed fishing for arrowtooth flounder, deep-water flatfish, and rex sole in the GOA (or in waters adjacent to the GOA when arrowtooth flounder, deep-water flatfish, and rex sole... authority of all eligible LLP licenses in the catcher/processor sector. (ii) For the deep-water halibut PSC...

  9. 50 CFR 679.82 - Rockfish Program use caps and sideboard limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... not participate in directed fishing for arrowtooth flounder, deep-water flatfish, and rex sole in the GOA (or in waters adjacent to the GOA when arrowtooth flounder, deep-water flatfish, and rex sole... authority of all eligible LLP licenses in the catcher/processor sector. (ii) For the deep-water halibut PSC...

  10. 75 FR 8841 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Less Than 60...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-26

    ... Vessels Less Than 60 feet (18.3 m) Length Overall Using Jig or Hook-and-Line Gear in the Bogoslof Pacific... less than 60 feet (18.3 m) length overall (LOA) using jig or hook-and-line gear in the Bogoslof Pacific...

  11. Towards a Post-Modern Science Education Curriculum-Discourse: Repetition of a Dream Catcher.

    ERIC Educational Resources Information Center

    Blades, David W.

    1997-01-01

    Discusses Kierkegaard's idea of repetition as a dynamic conversation between groups that reveals possible changes in a discourse. Describes an instructor's experiences imparting a science education methods course in a Native American school in Saskatchewan, highlighting the conversation between the instructors' past and Native American culture.…

  12. 76 FR 65500 - Fisheries of the Exclusive Economic Zone Off Alaska; Recordkeeping and Reporting Requirements...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-21

    ... on seaLandings, a consolidated electronic means of reporting landings and production of commercial... submitting required reports and logbooks using seaLandings. NMFS will provide a demonstration of the new version of seaLandings for at-sea catcher/processors and motherships, and training on how to submit daily...

  13. A bill to provide for the replacement or rebuilding of a vessel for the Non-American Fisheries Act trawl catcher processors that comprise the Amendment 80 fleet.

    THOMAS, 111th Congress

    Sen. Cantwell, Maria [D-WA

    2010-12-07

    Senate - 12/07/2010 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  14. 77 FR 58775 - Second Fishing Capacity Reduction Program for the Longline Catcher Processor Subsector of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ... and seasons, bycatch reduction measures). Overcapitalization has diminished the economic viability of... intent of a program is to decrease the number of harvesters in the fishery, increase the economic... the Regulatory Flexibility Act (RFA), to describe the economic impacts that this rule, if adopted...

  15. 77 FR 44572 - Second Fishing Capacity Reduction Program for the Longline Catcher Processor Subsector of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ... the economic viability of members of the fleet and increased the economic and social burden on fishery... the number of harvesters in the fishery, increase the economic efficiency of harvesting, and... of the Regulatory Flexibility Act (RFA), to describe the economic impacts that this proposed rule, if...

  16. 77 FR 35925 - Fisheries of the Exclusive Economic Zone Off Alaska; Monitoring and Enforcement Requirements in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-15

    ... Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Proposed... carry one observer and use a motion-compensated scale to weigh Pacific cod before it is processed. The... and catch reporting requirements that apply to catcher/processors not subject to this proposed action...

  17. 50 CFR Table 30 to Part 679 - Rockfish Program Retainable Percentages (in round wt. equivalent)

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (in round wt. equivalent) 30 Table 30 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND... Retainable Percentages (in round wt. equivalent) Fishery Incidental Catch Species Sector MRA as a percentage... aggregate catch Catcher Vessel 2.0 percent. See rockfish non-allocated species for “other species” Rockfish...

  18. An Old Dog and New Tricks

    ERIC Educational Resources Information Center

    Hinshaw, Craig

    2011-01-01

    Glass as an art form is anything but new. Three thousand years ago the Egyptians were molding glass beads and shaping elegant glass perfume bottles. In this article, the author describes how his students created sun catchers inspired by the beauty of Notre Dame's stained glass windows and the intrigue of Dale Chihuly's sculptures. (Contains 1…

  19. 75 FR 79330 - Groundfish Fisheries of the Exclusive Economic Zone Off Alaska; American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-20

    ... Chief Counsel for Advocacy of the Small Business Administration that this proposed rule, if adopted..., and one for catcher vessels delivering to motherships. Under the Small Business Administration's (SBA) regulations implementing the RFA, a small fishing business is defined as an entity that receives annual...

  20. 50 CFR 679.64 - Harvesting sideboard limits in other fisheries.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Pacific ocean perch. (A) The Aleutian Islands Pacific ocean perch harvest limit will be equal to the 1996 through 1997 aggregate retained catch of Aleutian Islands Pacific ocean perch by catcher/processors listed... sum of the Aleutian Islands Pacific ocean perch catch in 1996 and 1997 multiplied by the remainder of...

  1. 76 FR 39792 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch, Northern Rockfish, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    .... 101126522-0640-02] RIN 0648-XA544 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Ocean Perch... directed fishing for Pacific ocean perch, northern rockfish, and pelagic shelf rockfish by catcher... sideboard limits of Pacific ocean perch, northern rockfish, and pelagic shelf rockfish established for...

  2. 50 CFR 679.64 - Harvesting sideboard limits in other fisheries.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... area or subarea of the BSAI as follows: (i) Aleutian Islands Pacific ocean perch. (A) The Aleutian Islands Pacific ocean perch harvest limit will be equal to the 1996 through 1997 aggregate retained catch of Aleutian Islands Pacific ocean perch by catcher/processors listed in Sections 208(e)(1) through...

  3. 76 FR 39793 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish, Pacific Ocean Perch, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ..., Pacific Ocean Perch, and Pelagic Shelf Rockfish for Catcher Vessels Participating in the Limited Access...; closure. SUMMARY: NMFS is prohibiting directed fishing for northern rockfish, Pacific ocean perch, and... 2011 total allowable catch (TAC) of northern rockfish, Pacific ocean perch, and pelagic shelf rockfish...

  4. 75 FR 38938 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish, Pacific Ocean Perch, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ..., Pacific Ocean Perch, and Pelagic Shelf Rockfish for Catcher Vessels Participating in the Limited Access...; closure. SUMMARY: NMFS is prohibiting directed fishing for northern rockfish, Pacific ocean perch, and... 2010 total allowable catch (TAC) of northern rockfish, Pacific ocean perch, and pelagic shelf rockfish...

  5. 50 CFR 679.64 - Harvesting sideboard limits in other fisheries.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Pacific ocean perch. (A) The Aleutian Islands Pacific ocean perch harvest limit will be equal to the 1996 through 1997 aggregate retained catch of Aleutian Islands Pacific ocean perch by catcher/processors listed... sum of the Aleutian Islands Pacific ocean perch catch in 1996 and 1997 multiplied by the remainder of...

  6. Initial Geochemistry Data of the Lake Ohrid (Macedonia, Albania) DEEP -Site Sediment Record: The ICDP Scopsco Drilling Project

    NASA Astrophysics Data System (ADS)

    Francke, A.; Wagner, B.; Sulpizio, R.; Zanchetta, G.; Leicher, N.; Gromig, R.; Krastel, S.; Lindhorst, K.; Wilke, T.

    2014-12-01

    Ancient lakes, with sediment records spanning >1 million years, are very rare. The UNESCO World Heritage site of Lake Ohrid on the Balkans is thought to be the oldest lake in Europe. With 212 endemic species described to date, it is also a hotspot of evolution. In order to unravel the geological and evolutionary history of the lake, an international group of scientists, conducted a deep drilling campaign in spring 2013 under the umbrella of the ICDP SCOPSCO project (Scientific Collaboration on Past Speciation Conditions in Lake Ohrid). Overall, about 2,100 m of sediments were recovered from four drill sites. At the main drill site (DEEP-site) in central parts of the lake where seismic data indicated a maximum sediment fill of ca. 700 m, a total of more than 1,500 m of sediments were recovered until a penetration depth of 569 m. Currently, core opening, core description, XRF and MSCL scanning, sub-sampling (16 cm resolution), and inorganic and organic geochemical as well as sedimentological analyses of the sediment cores from the DEEP site are in progress at the University of Cologne. Previous studies at Lake Ohrid have shown that interglacial periods are characterized by high TIC and TOC contents, likely associated with high contents of calcite and organic matter in the sediments. In contrast, during glacial periods negligible TIC and low TOC contents correspond to high K counts indicating enhanced supply of clastic material. Similar patterns can be observed in the biogeochemical analyses of the subsamples and in the XRF data of the DEEP site record. Following these variations on a glacial-interglacial time scale, TIC and TOC data obtained from the subsamples and from core catcher samples indicate that the DEEP site sequence provides a 1.2 million year old continuous record of environmental and climatological variability in the Balkan Region. The age control can be further improved by first findings of macroscopic tephra horizons. Peaks in K, Sr, Zr, and magnetic susceptibility might indicate the occurrence of additional cryptotephra layers in the sediment sequence.

  7. Sedimentology of cores recovered from the Canada Basin of the Arctic Ocean

    NASA Astrophysics Data System (ADS)

    Edwards, B. D.; Saint-Ange, F.; Pohlman, J.; Higgins, J.; Mosher, D. C.; Lorenson, T. D.; Hart, P.

    2011-12-01

    Researchers from the United States and Canada are collaborating to understand the tectonic and sedimentary history of the Arctic Ocean between Canada and Alaska. As part of this on-going study, a joint US-Canadian ice breaker expedition operated in parts of the Canada Basin during August 2010. Occasional interruptions of the seismic data acquisition provided the ship time to collect gravity and piston cores at five sites-of-opportunity throughout the basin. High-resolution multibeam bathymetry and chirp sub-bottom profiler data collected immediately prior to coring reveal the fine-scale morphology of each site. Core photographs, X-ray radiographs, and physical property data support the following descriptions. Two piston cores were collected from the Beaufort Sea continental margin in a region of known bottom simulating reflectors (BSRs). Site 1 (2538 m water depth): This core recovered 5.72 m of gas-charged, gray sticky clay and silty-clay from an approximately 1100 m diameter, 130 m high conical mound overlying the crest of a buried anticline. Gas hydrate recovered in the core catcher combined with cracks and voids, methane and other hydrocarbon gasses, pyrite concretions, chemosynthetic clams, carbonate nodules, and soft carbonate masses indicate the likely upward migration of deep-seated fluids. Site 2 (1157 m water depth): This core, positioned 40 km upslope from the gas hydrate core, recovered 3 m of gray sticky silty clay and clayey silt near the base of an erosional scarp. Some voids and fracturing are apparent but carbonate masses and pyrite concretions are absent. Site 3 (3070 m water depth): This core from the top of a seamount discovered in 2009 in the north-central part of the Canada Basin recovered 4.94 m of sediment. More than 3 m of dark brown to yellowish brown, massive interbedded silty clays with sands and matrix-supported gravels (ice rafted debris [IRD]) occur in abrupt contact with underlying reddish yellow to brownish yellow silty clay and gravelly sandy clay interpreted to be altered hydrothermally. Successions of IRD layers create a thinly- to medium-bedded sequence throughout the lower section. Site 4 (3700 m water depth; central Canada Basin): This core recovered 3.4 m of sediment typified by decimeter-thick sequences of stacked graded beds with erosional basal contacts (Bouma sequences) characteristic of turbidite deposition. Site 5 (2081 m water depth; continental slope west of the Canadian archipelago): This core recovered 4.96 m of sediment of which the upper 2 m is silty clay to clayey silt with dispersed sand and granules. This upper section has an irregular, sharp basal contact with an underlying 16-cm-thick clast-supported massive gravel. The gravel has a scoured basal contact and overlies a monotonous gray clayey silt containing dispersed granules of IRD. Sparse and poorly preserved fauna throughout all the cores make age determination difficult; however, given the paucity of sediment cores in the Arctic Ocean, these samples provide vital geophysical groundtruth and sedimentological information about the basin.

  8. Parameters affecting of Akkuyu's safety assessment for severe core damages

    NASA Astrophysics Data System (ADS)

    Kavun, Yusuf; Karasulu, Muzaffer

    2015-07-01

    We have looked at all past core meltdowns (Three Mile Island, Chernobyl and Fukushima incidents) and postulated the fourth one might be taking place in the future most probably in a newly built reactors anywhere of the earth in any type of NPP. The probability of this observation is high considering the nature of the machine and human interaction. Operation experience is a very significant parameter as well as the safety culture of the host nation. The concerns is not just a lack of experience with industry with the new comers, but also the infrastructure and established institutions who will be dealing with the Emergencies. Lack of trained and educated Emergency Response Organizations (ERO) is a major concern. The culture on simple fire drills even makes the difference when a severe condition occurs in the industry. The study assumes the fourth event will be taking place at the Akkuyu NGS and works backwards as required by the "what went wrong " scenarios and comes up with interesting results. The differences studied in depth to determine the impact to the severe accidents. The all four design have now core catchers. We have looked at the operator errors'like in TMI); Operator errors combined with design deficiencies(like in Chernobyl) and natural disasters( like in Fukushima) and found operator errors to be more probable event on the Akkuyu's postulated next incident. With respect to experiences of the operators we do not have any data except for long and successful operating history of the Soviet design reactors up until the Chernobyl incident. Since the Akkuyu will be built, own and operated by the Russians we have found no alarming concerns at the moment. At the moment, there is no body be able to operate those units in Turkey. Turkey is planning to build the required manpower during the transition period. The resolution of the observed parameters lies to work and educate, train of the host nation and exercise together.

  9. ACEX: A First Look at Arctic Ocean Cenozoic History

    NASA Astrophysics Data System (ADS)

    Moran, K.; Backman, J.

    2004-12-01

    The first Integrated Ocean Drilling Program mission specificplatform expedition (ACEX - Arctic Coring Expedition) drilled and recovered core from five holes at four sites through Cenozoic sediments draping the crest of the Lomonosov Ridge in the central Arctic Ocean. Coring continued into the underlying Cretaceous sedimentary bedrock. Sites are located only a few nautical miles apart along a single seismic line (AWI-91090), showing an identical and coherent Cenozoic seismostratigraphy. Preliminary results from shipboard investigations of core-catcher-based bio- and lithostratigraphy, pore water analyses and core logger data describe a thick (~160 m) middle Miocene through Pleistocene sequence that shows large amplitude, cyclic variability in the density, magnetic susceptibility and acoustic velocity of the sediments. Sediments are largely carbonate free. Pleistocene sedimentation rates are close to 3 cm/ka, whereas Pliocene sediments are by-and-large missing. A sharp change in physical properties at ~200 m defines the transition into a 200+ m thick Paleogene sequence that is initially dominated by large numbers of dinoflagellate cysts. The early Miocene, Oligocene and late Eocene appear to be largely missing in a hiatus. However, a 32 m thick interval separates the overlying middle Miocene from the underlying middle Eocene and presumably preserves some of the early Neogene and late Paleogene sections. Dinoflagellate cysts, diatoms, ebridians and silicoflagellates are common to abundant in the middle Eocene section, which bottoms in a spectacular layer showing massive occurrences of glochidia and massulae (megaspores) of the freshwater hydropterid fern Azolla (duckweed) at the early/middle Eocene boundary (~306 m), suggesting strongly reduced surface water salinity or perhaps even a brief episode of fresh water conditions at the surface. Biosilica is not present prior to the late early Eocene (~320 m). The (sub-) tropical dinoflagellate species Apectodinium augustum occurs abundantly at around 380m in pyrite-rich mudstones, indicating that the Paleocene/Eocene boundary and the associated Carbon Isotope Excursion (CIE) interval were recovered, and that the Arctic Ocean experienced surface temperatures on the order of 20°C during the Paleocene Eocene Thermal Maximum (PETM). Benthic foraminifers indicate that the early Eocene through latest Paleocene sediments were deposited in shallow-marine, neritic to inner neritic, environments. The mudstone of late Paleocene age rests unconformably on Campanian marine sands, sandstone and mudstone.

  10. First results from IODP Expedition 325 to the Great Barrier Reef: unlocking climate and sea level secrets since the Last Glacial Maximum

    NASA Astrophysics Data System (ADS)

    Webster, J. M.; Yokoyama, Y.; Cotterill, C.; Expedition 325 Scientists

    2010-12-01

    Integrated Ocean Drilling Program (IODP) Exp. 325 (GBREC: Great Barrier Reef Environmental Change) that investigated fossil reefs on the shelf edge of the Great Barrier Reef (GBR), was the fourth IODP expedition to use a mission-specific platform, and was conducted by the European Consortium for Ocean Research Drilling (ECORD) Science Operator (ESO). The scientific objectives are to establish the course of sea level change, define sea-surface temperature variations, and to analyze the impact of these environmental changes on reef growth and geometry over the period of 20-10 ka. Exp.325 complements and extends the findings of the 2005 Exp. 310 (Tahiti Sea Level) that recovered Postglacial coral reef cores from the flanks of Tahiti from 41.6-117.5 meters below sea level and spanned ~16 to ~8 ka. Preliminary data confirms that Exp. 325 recovered truly unique and valuable fossil coral reef material from key periods in Earth's sea level and climate history from 30 to 9 ka. On Exp. 325 a succession of fossil reef structures preserved on the shelf edge seaward of the modern barrier reef were cored at three geographic locations (Hydrographers Passage, Noggin Pass and Ribbon Reef) from a dynamically positioned vessel in February-April 2010. A total of 34 boreholes were cored from 17 sites in four transects at depths ranging from 42.2 to 167.2 meters below sea level. Borehole logging of four boreholes provided continuous geophysical information about the drilled strata. The cores were split and described during the Onshore Science Party at the IODP Bremen Core Repository (Germany) in July 2010, where minimum and some standard measurements were made. Initial lithologic and biologic observations identified high-quality fossil coralgal frameworks, consistent with shallow, high energy reef settings - crucial for precise reconstructions of sea level and paleoclimate change. Preliminary C14-AMS and U-Th age interpretations from 60 core catcher samples confirmed that the cores span ages from >30 to 9 ka. This chronology, combined with their recovered depths, clearly demonstrates that Exp. 325 recovered coral reef material from key periods of interest for sea level change and environmental reconstruction, including the Last Glacial Maximum, Heinrich Events 1 and 2, 19ka-MWP, Bølling-Allerød, MWP1A, the Younger Dryas and MWPB. The new Exp. 325 cores are especially important because few fossil coral records span these intervals, and even fewer are from stable, passive margin settings far from the confounding influences of ice sheets or tectonic activity. This paper summarizes Exp. 325’s first results and their broader implications for understanding global sea-level and paleoclimate changes, and provides a first interpretation of how these reefs responded to environmental stress.

  11. "It's All about the 'Ganas'": Incorporating a Multicultural Curriculum in Developmental Education

    ERIC Educational Resources Information Center

    Doran, Erin E.; Singh, Anupma

    2018-01-01

    Despite the overrepresentation of students of color in developmental education, there is a lack of research on programs that promote the success and transfer of these students beginning in developmental education, especially Latinx students. Since 2012, the Dream Catchers program in Texas has targeted the recruitment, retention, and completion of…

  12. 77 FR 44216 - Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea and Aleutian Islands Crab...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-27

    ... of a zero (0) percent fee for cost recovery under the Bering Sea and Aleutian Islands Crab... Program includes a cost recovery provision to collect fees to recover the actual costs directly related to... processing sectors to each pay half the cost recovery fees. Catcher/processor quota share holders are...

  13. 78 FR 10135 - Fishing Capacity Reduction Program for the Longline Catcher Processor Subsector of the Bering Sea...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-13

    ... reduction loan to finance the non-pollock groundfish fishing capacity reduction program. DATES: The non... finance reduction program costs. Subpart L of 50 CFR part 600 is the framework rule generally implementing... higher fee rate will be credited to future landings. Fee collection and submission shall follow...

  14. 75 FR 38939 - Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species Fishery by Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    .... 0910131362-0087-02] RIN 0648-XX33 Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species...; closure. SUMMARY: NMFS is prohibiting directed fishing for species that comprise the deep-water species... Pacific halibut prohibited species catch (PSC) sideboard limit specified for the deep-water species...

  15. 76 FR 40628 - Groundfish Fisheries of the EEZ Off Alaska; Pacific Halibut Fisheries; CDQ Program; Bering Sea...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-11

    ..., business telephone number, e-mail address, port of landing, operation type (for catcher/processors.../processor, the at-sea operation type is pre-filled automatically. (3) If an SFP and crab delivery is... Registered Crab Receiver record in eLandings the region in which the stationary floating processor is located...

  16. 76 FR 15826 - Fisheries of the Exclusive Economic Zone Off Alaska; Gulf of Alaska License Limitation Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-22

    ... or non-trawl gear designations); and (4) designate the type of vessel operation permitted (i.e., LLP... catcher/processor). The endorsements for specific regulatory areas, gear designations, and vessel operational types are non-severable from the LLP license (i.e., once an LLP license is issued, the components...

  17. 76 FR 52147 - Fisheries of the Exclusive Economic Zone Off Alaska; Groundfish of the Gulf of Alaska; Amendment 88

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-19

    ... Pilot Program and the proposed Rockfish Program are a type of a limited access privilege program (LAPP... Central GOA fishermen, shoreside processors, catcher/processors, and communities by (1) providing greater... the ability to choose when to fish, (3) providing greater stability for processors by spreading...

  18. 75 FR 31717 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-04

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0910131363-0087-02] RIN 0648-XW75 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  19. 75 FR 7976 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0810141351-9087-02] RIN 0648-XU52 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher-Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  20. 76 FR 47083 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 101126521-0640-2] RIN 0648-XA616 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher/Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  1. 77 FR 10668 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 101126521-0640-02] RIN 0648-XB028 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher/Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  2. 75 FR 17315 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-06

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 0910131363-0087-02] RIN 0648-XV66 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  3. 77 FR 19144 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 679 [Docket No. 111213751-2102-02] RIN 0648-XB138 Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod for American Fisheries Act Catcher/Processors Using Trawl Gear in the Bering Sea and Aleutian Islands...

  4. 50 CFR 679.7 - Prohibitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... as a catcher/processor in the BSAI during the same fishing year. (iii) Operate a vessel as a... mothership in the BSAI during the same fishing year. (iv) Operate any vessel in the GOA in more than one of... any fishing year. (v) Operate any vessel in the GOA under both the “inshore component in the GOA” and...

  5. 50 CFR 660.323 - Pacific whiting allocations, allocation attainment, and inseason allocation reapportionment.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... whiting is allocated among three sectors, as follows:34 percent for the catcher/processor sector; 24 percent for the mothership sector; and 42 percent for the shore-based sector. No more than 5 percent of... primary whiting season north of 42° N. lat.Specific sector allocations for a given calendar year are found...

  6. 50 CFR 660.131 - Pacific whiting fishery management measures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., surimi (fish paste with additives), fillets (meat from the side of the fish, behind the head and in front... measures. (a) Sectors. In order for a vessel to fish in a particular whiting fishery sector after May 11... considered to be a catcher/processor nor is it considered to be processing fish. Such a vessel is considered...

  7. Brain Friendly Techniques: Mind Mapping

    ERIC Educational Resources Information Center

    Goldberg, Cristine

    2004-01-01

    Mind Mapping can be called the Swiss Army Knife for the brain, a total visual thinking tool or a multi-handed thought catcher. Invented by Tony Buzan in the early 1970s and used by millions around the world, it is a method that can be a part of a techniques repertoire when teaching information literacy, planning, presenting, thinking, and so…

  8. Trauma-Related Nightmares among American Indian Veterans: Views from the Dream Catcher

    ERIC Educational Resources Information Center

    Shore, Jay H.; Orton, Heather; Manson, Spero M.

    2009-01-01

    Dreams hold particular relevance in mental health work with American Indians (AIs). Nightmares are a common sequelae of trauma and a frequent defining feature of post-traumatic stress disorder (PTSD). Despite mounting evidence of the prevalence of trauma and PTSD among AIs and the important cultural role of dreams, no work to date has directly…

  9. 50 CFR 600.1108 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... of the ex-vessel production value of all post-reduction Longline Subsector landings, the fee will be... percent of the ex-vessel Pacific cod revenues, a standardized additional fee will be assessed. The... revenue records and NMFS conversion factors for pollock, arrowtooth flounder, Greenland turbot, skate...

  10. 50 CFR 600.1108 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... of the ex-vessel production value of all post-reduction Longline Subsector landings, the fee will be... percent of the ex-vessel Pacific cod revenues, a standardized additional fee will be assessed. The... revenue records and NMFS conversion factors for pollock, arrowtooth flounder, Greenland turbot, skate...

  11. 50 CFR 600.1108 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of the ex-vessel production value of all post-reduction Longline Subsector landings, the fee will be... percent of the ex-vessel Pacific cod revenues, a standardized additional fee will be assessed. The... revenue records and NMFS conversion factors for pollock, arrowtooth flounder, Greenland turbot, skate...

  12. 77 FR 40341 - Fisheries of the Exclusive Economic Zone Off Alaska; Notice of Public Workshop for Bering Sea and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-09

    ... Crab Economic Data Reports AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and... Fishery Science Center (AFSC) will hold a public workshop in Seattle, WA, to review draft revisions to the Bering Sea and Aleutian Islands (BSAI) Crab Economic Data Reports (EDR) currently required from catcher...

  13. Controversial Novels and Censorship in the Schools.

    ERIC Educational Resources Information Center

    Katz, John Stuart

    The legal history of censorship in general in the United States as well as the legal context in particular of the censorship of novels from schools is discussed. This thesis deals with four novels which have aroused substantial controversy when taught in the schools. The novels are: "The Catcher in the Rye," by J. D. Salinger, "The Adventures of…

  14. A simple and inexpensive technique for assessing microbial contamination during drilling operations

    NASA Astrophysics Data System (ADS)

    Friese, André; Vuillemin, Aurèle; Kallmeyer, Jens; Wagner, Dirk

    2016-04-01

    Exploration of the Deep Biosphere relies on drilling, which inevitably causes infiltration of drilling fluids, containing allochthonous microbes from the surface, into the core. Therefore it is absolutely necessary to trace contamination of the sediment core in order to identify uncontaminated samples for microbiological investigations. Several techniques have been used in the past, including fluorescent dyes, perfluorocarbon tracers and fluorescent microspheres. Fluorescent dyes are inexpensive and easy to analyze on-site but are sensitive to light, pH and water chemistry. Furthermore, significant sorption to clays can decrease the fluorescence signal. Perfluorocarbon tracers are chemically inert hydrophobic compounds that can be detected with high sensitivity via gas chromatography, which might be a problem for on-site analysis. Samples have to be taken immediately after core retrieval as otherwise the volatile tracer will have diffused out of the core. Microsphere tracers are small (0.2 - 0.5 μm diameter) fluorescent plastic particles that are mixed into the drilling fluid. For analysis, these particles can be extracted from the sediment sample, transferred onto a filter and quantified via fluorescence microscopy. However, they are very expensive and therefore unsuitable for deep drilling operations that need large amounts of drilling fluids. Here, we present an inexpensive contamination control approach using fluorescent pigments initially used for coloring plastics. The price of this tracer is nearly three orders of magnitude lower than conventional microsphere tracers. Its suitability for large drilling campaigns was tested at the ICDP Deep Drilling at Lake Towuti, Sulawesi, Indonesia. The tracer was diluted 1:1000 in lake water, which was used as the drilling fluid. Additionally, a plastic bag filled with 20 mL of undiluted tracer was attached to the core catcher to increase the amount of particles in the liner fluid right at the core. After core retrieval, the core was cut and the liner fluid collected. From each whole round core (WRC) that was taken for microbiological and biogeochemical analyses, small samples of 1 cc were retrieved with sterile cutoff syringes from the rim, the center and an intermediate position. After dilution and homogenization in 9 mL MilliQ water, 10 μL of the sediment slurry was transferred onto a filter membrane and particles counted via fluorescence microscopy. Additionally, particles in the liner fluid were also quantified. This allows the quantification of the amount of drilling fluid that has entered the sediment sample during drilling. The minimum detectable volume of drilling fluid was in the order of single nanoliters per cc of sediment, which is in the range of established techniques. The presented method requires only a minimum of equipment and allows rapid determination of contamination in the sediment core and an easy to handle on-site analysis at low costs. The sensitivity is in the same range as perfluorocarbon and microsphere tracer applications. Thus, it offers an inexpensive but powerful technique for contamination assessment for future drilling campaigns.

  15. Processes to Open the Container and the Sample Catcher of the Hayabusa Returned Capsule in the Planetary Material Sample Curation Facility of JAXA

    NASA Technical Reports Server (NTRS)

    Fujimura, A.; Abe, M.; Yada, T.; Nakamura, T.; Noguchi, T.; Okazaki, R.; Ishibashi, Y.; Shirai, K.; Okada, T.; Yano, H.; hide

    2011-01-01

    Japanese spacecraft Hayabusa, which returned from near-Earth-asteroid Itokawa, successfully returned its reentry capsule to the Earth, the Woomera Prohibited Area in Australia in Jun 13th, 2010, as detailed in another paper [1]. The capsule introduced into the Planetary Material Sample Curation Facility in the Sagamihara campus of JAXA in the early morning of June 18th. Hereafter, we describe a series of processes for the returned capsule and the container to recover gas and materials in there. A transportation box of the recovered capsule was cleaned up on its outer surface beforehand and introduced into the class 10,000 clean room of the facility. Then, the capsule was extracted from the box and its plastic bag was opened and checked and photographed the outer surface of the capsule. The capsule was composed of the container, a backside ablator, a side ablator, an electronic box and a supporting frame. The container consists of an outer lid, an inner lid, a frame for latches, a container and a sample catcher, which is composed of room A and B and a rotational cylinder. After the first check, the capsule was packed in a plastic bag with N2 again, and transferred to the Chofu campus in JAXA, where the X-ray CT instrument is situated. The first X-ray CT analysis was performed on the whole returned capsule for confirming the conditions of latches and O-ring seal of the container. The analysis showed that the latches of the container should have worked normally, and that the double Orings of the container seemed to be sealed its sample catcher with no problem. After the first X-ray CT, the capsule was sent back to Sagamihara and introduced in the clean room to exclude the electronic box and the side ablator from the container by hand tools. Then the container with the backside ablator was set firmly to special jigs to fix the lid of container tightly to the container and set to a milling machine. The backside ablator was drilled by the machine to expose heads of bolts, which combined the ablator to the outer lid of the container, and after the drilling had been finished, all the bolts were unscrewed and the backside ablator was removed from the container. Then, the container was sent to the Chofu X-ray facility again to examine in detail by a micro X-ray CT instrument in order to reconfirm that the condition of the latches of the lid of container was normal and that its double O-ring seemed to have been sealed after the last X-ray CT analysis.

  16. Nuclear Excitation by Electronic Transition of U-235

    NASA Astrophysics Data System (ADS)

    Chodash, Perry

    2017-01-01

    Nuclear excitation by electronic transition (NEET) is a rare nuclear excitation that is theorized to exist in numerous isotopes. NEET is the inverse of bound internal conversion and occurs when an electronic transition couples to a nuclear transition causing the nucleus to enter an excited state. This process can only occur for isotopes with low-lying nuclear levels due to the requirement that the electronic and nuclear transitions have similar energies. One of the candidate isotopes for NEET, 235U, has been studied several times over the past 40 years and NEET of 235U has never been conclusively observed. These past experiments generated conflicting results with some experiments claiming to observe NEET of 235U and others setting limits for the NEET rate. If NEET of 235U were to occur, the uranium would be excited to its first excited nuclear state. The first excited nuclear state in 235U is only 76 eV, the second lowest known nuclear state. Additionally, the 76 eV state is a nuclear isomer that decays by internal conversion with a half-life of 26 minutes. In order to measure whether NEET occurs in 235U and at what rate, a uranium plasma was required. The plasma was generated using a Q-switched Nd:YAG laser outputting 789 mJ pulses of 1064 nm light. The laser light was focused onto uranium targets generating an intensity on target of order 1012 W/cm2. The resulting plasma was captured on a catcher plate and electrons emitted from the catcher plate were accelerated and focused onto a microchannel plate detector. Measurements performed using a variety of uranium targets spanning depleted uranium up to 99.4% enriched uranium did not observe a 26 minute decay. An upper limit for the NEET rate of 235U was determined. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. The U.S. DHS, UC Berkeley, the NNIS fellowship and the NSSC further supported this work.

  17. COMMUNICATING ASTRONOMY IN EUROPE: Strategies and Challenges in International Organisations

    NASA Astrophysics Data System (ADS)

    Barrosa, Mariana

    2007-08-01

    How much do Europeans really know about science and technology? What do they think about it? For more than a decade, the European Union (EU) has carried out regular surveys to measure public opinion and knowledge on a variety of themes across its member states. One survey carried out in early 2005 is of particular interest to science communication - "Europeans, Science and Technology". It's easy to see that science and technology are racing along faster than ever and you would think that people's knowledge and interest of science and technology would be keeping pace. Unfortunately, that is not the case. Over the past few years, Europeans' overall interest in science and technology has decreased. Astronomy plays a special role within public science communication. It serves as a general science "catcher", not only for young people. Astronomy embraces core sciences such as mathematics, physics, chemistry, biology and geology as well as technical disciplines including optics, observational techniques and data analysis. Astronomy reaches wide into the realm of philosophy; it rubs shoulders with religion and is at the core of many science fiction stories. In short, astronomy attracts a wide spectrum of people and may serve as a powerful vehicle for improving the public awareness and understanding of science. Several key International Organisations like the European Space Agency (ESA), the European Southern Observatory (ESO), Europlanet and the International Astronomical Union (IAU) work in Astronomy and Space Sciences in Europe. As well as a general overview of the outreach and communication actions of some of these Organisations, focus will be made in specific cases and examples in the context of these organisations. 2009 will be the International Year of Astronomy. It will be interesting to see how these European Organisations are getting ready for this ultimate science communication challenge.

  18. Preliminary Micropaleontological Investigation of a Preserved, Late Pleistocene Cypress Forest on the Northern Gulf of Mexico Inner Shelf

    NASA Astrophysics Data System (ADS)

    Truong, J. T.; DeLong, K. L.; Bentley, S. J.; Xu, K.; Harley, G. L.; Reese, A.; Gonzalez, S.; Obelcz, J.; Caporaso, A.

    2017-12-01

    Exposed at the bottom of a trough 13 km offshore Orange Beach, AL on the Gulf of Mexico (GOM) shelf in 18 m water depth are exceptionally preserved in situ bald cypress (Taxodium distichum) stumps. Preserved seeds (T. distichum, Cephalanthus occidentalis, Hibiscus lasiocarpos, Liquidambar styraciflua) discovered in core catcher samples illustrate the exceptional preservation of the site. Woody debris samples have come back radiocarbon dead with an exception to samples located in the upper peat layer with 14C ages from 37,350-41,830 years BP. Optically stimulated luminescence and 14C dates, in combination with GOM eustatic sea level curves, suggest the forest was located 30 m above the paleoshoreline. How the forest remained preserved during subaerial exposure of the continental shelf through the Last Glacial Maximum lowstand until ensuing Holocene sea level transgression remains unknown. The R/V Coastal Profiler collected 7 vibracores from the study site in 2015 and an additional 11 in 2016. A single core (DF1) contains facies identified as the Holocene Mississippi-Alabama-Florida sand sheet, a transitional facies of interbedded sand and mud, and a basal floodplain facies in which the stumps reside. This study seeks to identify the location of the Pleistocene-Holocene unconformity and to assist in stratigraphy of the area. Foraminiferal assemblages found within the transitional facies are of a shallow marine environment that suggests Holocene in age. It is hypothesized that a pulse of sea level rise during Marine Isotope Stages 3-4 caused subsequent rapid aggradation of the paleovalley system allowing for preservation through >30 kyrs of subaerial exposure. One of the ultimate goals of this study is to serve as a guide for identification of other possible sites along the gulf coast.

  19. Responses of College Freshmen to Three Novels. NCTE Research Report No. 7.

    ERIC Educational Resources Information Center

    Wilson, James R.

    A study was conducted to explore student response to literature and the influence of classroom experiences on that response. Three novels were selected for study: "The Catcher in the Rye" by J. D. Salinger, "The Grapes of Wrath" by John Steinbeck, and "A Farewell to Arms" by Ernest Hemingway. Each of 54 freshman English students read one of the…

  20. 75 FR 61642 - Fisheries of the Exclusive Economic Zone Off Alaska; Modified Nonpelagic Trawl Gear and Habitat...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-06

    ... Island Habitat Conservation Area (SMIHCA). Four minor changes to the FMP also are made, three of which do... Flexibility Act (RFA). However, based on their combined groundfish revenues, none of the four catcher vessels... states that, for each rule or group of related rules for which an agency is required to prepare a FRFA...

  1. 75 FR 38937 - Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species Fishery by Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ... directed fishing for the deep-water species fisheries. DATES: Effective 1200 hrs, Alaska local time (A.l.t.... 0910131362-0087-02] RIN 0648-XX32 Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species...: NMFS is prohibiting directed fishing for species that comprise the deep-water species fishery for...

  2. 76 FR 39790 - Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species Fishery by Catcher...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... directed fishing for the deep-water species fisheries. DATES: Effective 1200 hrs, Alaska local time (A.l.t.... 101126522-0640-02] RIN 0648-XA536 Fisheries of the Economic Exclusive Zone Off Alaska; Deep-Water Species...: NMFS is prohibiting directed fishing for species that comprise the deep-water species fishery for...

  3. 77 FR 11412 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-27

    ... Vessels Using Trawl Gear in the Western Regulatory Area of the Gulf of Alaska AGENCY: National Marine... (CVs) using trawl gear in the Western Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to CVs using trawl gear in the Western Regulatory Area of the GOA. DATES: Effective 1200 hrs...

  4. 75 FR 38937 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish and Pelagic Shelf Rockfish...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    .... 0910131362-0087-02] RIN 0648-XX34 Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish and Pelagic Shelf Rockfish for Trawl Catcher Vessels Participating in the Entry Level Rockfish Fishery in the... participating in the entry level rockfish fishery in the Central Regulatory Area of the Gulf of Alaska (GOA...

  5. Reader Identity: A Case Study of Korean Graduate Students' Meaning Construction of an L2 Literary Text

    ERIC Educational Resources Information Center

    Shin, Changok; Riazantseva, Anastasia

    2015-01-01

    Grounded in constructivist theories of reading and informed by the contemporary theories of identity, this study explored how three Korean adult speakers of English as a foreign language (EFL) constructed meaning of the novel "The Catcher in the Rye", and how their identities mediated this process. Sources of data included think aloud…

  6. 50 CFR 680.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., a vessel operator. Catcher/processor (CP) means a vessel that is used for catching crab and... § 680.40(c)(5)(ii), (c)(5)(iii), or (c)(5)(iv) based on the procedures established in § 680.40(c)(5). CP standard price means price, expressed in U.S. dollars per raw crab pound, for all CR crab landed by a CP as...

  7. 50 CFR 680.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., a vessel operator. Catcher/processor (CP) means a vessel that is used for catching crab and... § 680.40(c)(5)(ii), (c)(5)(iii), or (c)(5)(iv) based on the procedures established in § 680.40(c)(5). CP standard price means price, expressed in U.S. dollars per raw crab pound, for all CR crab landed by a CP as...

  8. 50 CFR 680.2 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., a vessel operator. Catcher/processor (CP) means a vessel that is used for catching crab and... § 680.40(c)(5)(ii), (c)(5)(iii), or (c)(5)(iv) based on the procedures established in § 680.40(c)(5). CP standard price means price, expressed in U.S. dollars per raw crab pound, for all CR crab landed by a CP as...

  9. 50 CFR 680.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., a vessel operator. Catcher/processor (CP) means a vessel that is used for catching crab and... § 680.40(c)(5)(ii), (c)(5)(iii), or (c)(5)(iv) based on the procedures established in § 680.40(c)(5). CP standard price means price, expressed in U.S. dollars per raw crab pound, for all CR crab landed by a CP as...

  10. 50 CFR 680.2 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., a vessel operator. Catcher/processor (CP) means a vessel that is used for catching crab and... § 680.40(c)(5)(ii), (c)(5)(iii), or (c)(5)(iv) based on the procedures established in § 680.40(c)(5). CP standard price means price, expressed in U.S. dollars per raw crab pound, for all CR crab landed by a CP as...

  11. 50 CFR Table 47a to Part 679 - Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 371 1.65 Arctic Fjord 940866 3396 4.46 293 68 361 1.60 Northern Glacier 663457 661 3.12 205 48 253 1.12 Pacific Glacier 933627 3357 5.06 332 77 409 1.82 Highland Light 577044 3348 5.14 337 79 416 1.85...

  12. 50 CFR Table 47a to Part 679 - Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 371 1.65 Arctic Fjord 940866 3396 4.46 293 68 361 1.60 Northern Glacier 663457 661 3.12 205 48 253 1.12 Pacific Glacier 933627 3357 5.06 332 77 409 1.82 Highland Light 577044 3348 5.14 337 79 416 1.85...

  13. 50 CFR Table 47a to Part 679 - Percent of the AFA Catcher/Processor Sector's Pollock Allocation, Numbers of Chinook Salmon Used...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 371 1.65 Arctic Fjord 940866 3396 4.46 293 68 361 1.60 Northern Glacier 663457 661 3.12 205 48 253 1.12 Pacific Glacier 933627 3357 5.06 332 77 409 1.82 Highland Light 577044 3348 5.14 337 79 416 1.85...

  14. Incomplete mass transfer processes in 28Si +93Nb reaction

    NASA Astrophysics Data System (ADS)

    Tripathi, R.; Sodaye, S.; Ramachandran, K.; Sharma, S. K.; Pujari, P. K.

    Cross sections of reaction products were measured in 28Si +93Nb reaction using recoil catcher technique involving by off-line gamma-ray spectrometry at beam energies of 105 and 155MeV. At Elab = 155MeV, the contribution from different incomplete mass transfer processes is investigated. Results of the present studies show the contribution from deep inelastic collision (DIC), massive transfer or incomplete fusion (ICF) and quasi-elastic transfer (QET). The contribution from massive transfer reactions was confirmed from the fractional yield of the reaction products in the forward catcher foil. The present results are different from those from the reactions with comparatively higher entrance channel mass asymmetry with lighter projectiles, for which dominant transfer processes are ICF and QET which involve mass transfer predominantly from projectile to target. The N/Z values of the products close to the target mass were observed to be in a wide range, starting from N/Z of the target (93Nb) and extending slightly below the N/Z of the composite system, consistent with the contribution from DIC and QET reactions. At Elab = 105MeV, a small contribution from QET was observed in addition to complete fusion.

  15. “Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise and its surface waste water purification

    NASA Astrophysics Data System (ADS)

    Strelkov, Alexander; Teplykh, Svetlana; Gorshkalev, Pavel; Bystranova, Anastasia

    2017-10-01

    Surface water disposal is one of the most relevant problems for Nizhniy Novgorod railway service enterprises. Waste water must be quickly removed with special drainage devices and water drainage facilities (culverts, slope drains, pipes, ditches, etc.). During “Sapsan”-carriages defrosting watse water is aggregated on railroad tracks. It leads to track bed structure sagging, roadbed washaway and damages to point switches. In this paper the authors describe a concrete system of waste water disposal from railway service enterprises. This system is realized through culverts readjusted at the foot of ballast section. Thereafter, the collected water is pumped into a water collector and to local sewage waste-disposal plants. For railway stations with three or more tracks surface runoff diversion scheme depends on topography, railway tracks types, flow discharge and is compiled individually for each object. This paper examines “Sapsan”-carriages defrosting station of Nizhniy Novgorod railway service enterprise. It presents a technology scheme and equipment consisting of Sand catcher LOS-P, Oil catcher LOS-N, pressure-tight flotation unit; drain feed pump; solution-consuming tank of the coagulant, the solution-consuming tank of flocculant. The proposed technology has been introduced into the project practice.

  16. Habits and customs of crab catchers in southern Bahia, Brazil.

    PubMed

    Firmo, Angélica M S; Tognella, Mônica M P; Tenório, Gabrielle D; Barboza, Raynner R D; Alves, Rômulo R N

    2017-08-23

    Brazilian mangrove forests are widely distributed along the coast and exploited by groups of people with customs and habits as diverse as the biology of the mangrove ecosystems. This study identifies different methods of extracting crabs that inhabit the mangrove belts; some of these activities, such as catching individual crabs by hand, are aimed at maintaining natural stocks of this species in Mucuri (south Bahia), Brazil. In the studied community, illegal hunting activities that violate Brazilian legislation limiting the use of tangle-netting in mangrove ecosystem were observed. According to our observations, fishermen, to catch individual crabs, use the tangle-netting technique seeking to increase income and are from families that have no tradition of extraction. This analysis leads us to conclude that catchers from economically marginalised social groups enter mangroves for purposes of survival rather than for purposes of subsistence, because the catching by tangle-netting is a predatory technique. Tangle-netting  technique increase caught but also increases their mortality rate. We emphasise that traditional catching methods are unique to Brazil and that manual capturing of crab should be preserved through public policies aimed at maintaining the crab population.

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Breton, D.; /Orsay, LAL; Delagnes, E.

    There is a considerable interest to develop new time-of-flight detectors using, for example, micro-channel-plate photodetectors (MCP-PMTs). The question we pose in this paper is if new waveform digitizer ASICs, such as the WaveCatcher and TARGET, operating with a sampling rate of 2-3 GSa/s can compete with 1GHz BW CFD/TDC/ADC electronics. We have performed a series of measurements with these waveform digitizers coupled to MCP-PMTs operating at low gain and with a signal equivalent to {approx}40 photoelectrons. The tests were done with a laser diode on detectors operating under the same condition used previously in SLAC and Fermilab beam tests. Ourmore » test results indicate that one can achieve similar resolution with both methods. Although the commercial CFD-based electronics does exist and performs very well, it is difficult to implement on a very large scale, and therefore the custom electronics is needed. In addition, the analog delay line requirement makes it very difficult to incorporate CFD discriminators in ASIC designs.« less

  18. Magnetospheric and solar physics observations with the PAMELA experiment

    NASA Astrophysics Data System (ADS)

    Casolino, M.; Adriani, O.; Ambriola, M.; Barbarino, G. C.; Basili, A.; Bazilevskaja, G. A.; Boezio, M.; Bogomolov, E. A.; Bonechi, L.; Bongi, M.; Bonvicini, V.; Bruno, A.; Cafagna, F.; Campana, D.; Carlson, P.; Castellini, G.; de Marzo, C.; de Pascale, M. P.; de Rosa, G.; de Simone, N.; di Felice, V.; Fedele, D.; Galper, A. M.; Hofverberg, P.; Koldashov, S. V.; Krutkov, S. Yu.; Kvashnin, A. N.; Lundquist, J.; Maksumov, O.; Malvezzi, V.; Marcelli, L.; Menn, W.; Mikhailov, V. V.; Minori, M.; Misin, S.; Mocchiutti, E.; Morselli, A.; Nikonov, N. N.; Orsi, S.; Osteria, G.; Papini, P.; Pearce, M.; Picozza, P.; Ricci, M.; Ricciarini, S. B.; Runtso, M. F.; Russo, S.; Simon, M.; Sparvoli, R.; Spillantini, P.; Stozhkov, Yu. I.; Taddei, E.; Vacchi, A.; Vannuccini, E.; Vasilyev, G. I.; Voronov, S. A.; Yurkin, Y. T.; Zampa, G.; Zampa, N.; Zverev, V. G.

    2008-04-01

    PAMELA is a satellite-borne experiment designed to make long duration measurements of the cosmic radiation in Low Earth Orbit. It is devoted to the detection of the cosmic-ray spectra in the 100 MeV 300 GeV range with primary scientific goal the measurement of antiproton and positron spectra over the largest energy range ever achieved. Other tasks include the search for antinuclei with unprecedented sensitivity and the measurement of the light nuclear component of cosmic rays. In addition, PAMELA can investigate phenomena connected with solar and Earth physics. The apparatus consists of: a Time of Flight system, a magnetic spectrometer, an electromagnetic imaging calorimeter, a shower tail catcher scintillator, a neutron detector and an anticoincidence system. In this work we present some measurements of galactic, secondary and trapped particles performed in the first months of operation.

  19. 75 FR 56485 - Groundfish Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea/Aleutian Islands Crab...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ... catcher/processors to weigh all offloaded crab on a state-approved scale that produces a printed record... designated port and weigh that product on a scale approved by the state in which the crab is removed from the... the vessel and to attach a scale printout showing gross product offload weight. The weight reported on...

  20. 78 FR 4346 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-22

    .../Processors Using Trawl Gear in the Western Regulatory Area of the Gulf of Alaska AGENCY: National Marine... (C/Ps) using trawl gear in the Western Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to C/Ps using trawl gear in the Western Regulatory Area of the GOA. DATES: Effective 1200 hours...

  1. 77 FR 9589 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-17

    .../Processors Using Trawl Gear in the Western Regulatory Area of the Gulf of Alaska AGENCY: National Marine... (C/Ps) using trawl gear in the Western Regulatory Area of the Gulf of Alaska (GOA). This action is... apportioned to C/Ps using trawl gear in the Western Regulatory Area of the GOA. DATES: Effective 1200 hrs...

  2. 77 FR 11776 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher/Processors Using Hook...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-28

    .../Processors Using Hook-and-Line Gear in the Central Regulatory Area of the Gulf of Alaska AGENCY: National... (C/Ps) using hook-and-line gear in the Central Regulatory Area of the Gulf of Alaska (GOA). This... catch apportioned to C/Ps using hook-and-line gear in the Central Regulatory Area of the GOA. DATES...

  3. 77 FR 14994 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pollock in the Bering Sea...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-14

    ... error on page 12215 in row 16 of the third column. The 2012 A season directed fishing allowance for the... \\1\\ 2013 B season \\1\\ season \\1\\ Area and sector 2012 2013 Allocations A season SCA harvest B season... allocated as a DFA as follows: inshore sector--50 percent, catcher/processor sector (C/P)--40 percent, and...

  4. The Values in Four Selected American Novels and Suggested Uses of These Values in High School English Classes.

    ERIC Educational Resources Information Center

    Hipple, Theodore Wallace

    The first purpose of this study was to discover and analyze the values in "The Red Badge of Courage,""Adventures of Huckleberry Finn,""The Catcher in the Rye," and "To Kill a Mockingbird." The values--conscious or unconscious motivators and justifiers of characters' actions and judgments--were classified according to H. S. Broudy's "Building a…

  5. Citizen Science and Event-Based Science Education with the Quake-Catcher Network

    NASA Astrophysics Data System (ADS)

    DeGroot, R. M.; Sumy, D. F.; Benthien, M. L.

    2017-12-01

    The Quake-Catcher Network (QCN, quakecatcher.net) is a collaborative, citizen-science initiative to develop the world's largest, low-cost strong-motion seismic network through the utilization of sensors in laptops and smartphones or small microelectromechanical systems (MEMS) accelerometers attached to internet-connected computers. The volunteer computers monitor seismic motion and other vibrations and send the "triggers" in real-time to the QCN server hosted at the University of Southern California. The QCN servers sift through these signals and determine which ones represent earthquakes and which ones represent cultural noise. Data collected by the Quake-Catcher Network can contribute to better understanding earthquakes, provide teachable moments for students, and engage the public with authentic science experiences. QCN partners coordinate sensor installations, develop QCN's scientific tools and engagement activities, and create next generation online resources. In recent years, the QCN team has installed sensors in over 225 K-12 schools and free-choice learning institutions (e.g. museums) across the United States and Canada. One of the current goals of the program in the United States is to establish several QCN stations in K-12 schools around a local museum hub as a means to provide coordinated and sustained educational opportunities leading up to the yearly Great ShakeOut Earthquake Drill, to encourage citizen science, and enrich STEM curriculum. Several school districts and museums throughout Southern California have been instrumental in the development of QCN. For educators QCN fulfills a key component of the Next Generation Science Standards where students are provided an opportunity to utilize technology and interface with authentic scientific data and learn about emerging programs such as the ShakeAlert earthquake early warning system. For example, Sunnylands Center in Rancho Mirage, CA leads Coachella Valley Hub, which serves 31 K-12 schools, many of which are within kilometers of the San Andreas fault. Sunnylands established contact with the schools and organized the installations. Since 2016, representatives from the Incorporated Research Institutions for Seismology (IRIS), the Southern California Earthquake Center (SCEC), and the U.S. Geological Survey manage QCN.

  6. Helium isotopes in matrix pore fluids from SAFOD drill core samples suggest mantle fluids cannot be responsible for fault weakening

    NASA Astrophysics Data System (ADS)

    Ali, S.; Stute, M.; Torgersen, T.; Winckler, G.

    2008-12-01

    To quantify fluid flow in the San Andreas Fault (SAF) (and since direct fracture fluid sampling of the fault zone was not available), we have adapted a method to extract rare gases from matrix fluids of whole rocks by diffusion. Helium was measured on drill core samples obtained from 3054 m (Pacific Plate) to 3990 m (North American Plate) through the San Andreas Fault Zone (SAFZ) ~3300 m during SAFOD Phases I (2004), II (2005), III (2007). Samples were typically collected as 2.54 cm diameter subcores drilled into the ends of the cores, or from the core catcher and drillcore fragments within <2hr after core recovery. The samples were placed into ultra high vacuum stainless steel containers, flushed with ultra high purity nitrogen and immediately evacuated. Helium isotopes of the extracted matrix pore fluids and the solid matrix were determined by mass spectrometery at LDEO. Matrix porefluid 3He/4He ratios are ~0.4 - 0.5xRa (Ra: atmospheric 3He/4He = 1.384 x 10-6) in the Pacific Plate, increasing toward the SAFZ, while pore fluids in the North American Plate have a 3He/4He range of 0.7-0.9Ra, increasing away from the SAFZ (consistent with results from mud gas samples (Wiersberg and Erzinger, 2007) and direct fluid samples (Kennedy et al., 2007)). Helium isotope ratios of the solid matrix are less than 0.06Ra across the SAF in samples from both the North American and the Pacific plates, thereby excluding the host matrix as source for the enhanced isotopic signature. If the system is assumed to be in steady state, then the flux of mantle helium must be from the North American Plate to the Pacific plate. The steeper gradient in the Pacific Plate relative to the North American plate is consistent with a porosity corrected effective diffusivity. The source for this mantle helium in the North American Plate is likely related to a low crustal conductivity zone identified by magnetotelluric signals (Becken et al., 2008) that provides a channel for transport of mantle helium within brittle crust under high strain rates (Kennedy et al., 2007). The helium isotope gradients suggest that fault weakening by mantle-derived fluid pressure is unlikely. More likely, mantle fluids "bleed" into the North American plate below seismogenic depths and are transported across the fault by nonseismic, diffusive processes.

  7. National Defense Center for Energy and Environment 2007 Annual Report

    DTIC Science & Technology

    2007-01-01

    Catcher does this and more. Using a unique, self - healing elastomeric top cover that keeps out moisture and minimizes oxygen content, the Bullet...claw to enable remote-controlled excavation of UXO. In this effort the NDCEE teamed with the Air Force Research Laboratory (AFRL) Robotic Research...Group, whose mission is to “develop and advance robotic technologies that will protect, support, and augment the warfighter in the accomplishment of

  8. 77 FR 19147 - Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Catcher Vessels Using Trawl...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    ... under Executive Order 12866. Authority: 16 U.S.C. 1801 et seq. Dated: March 26, 2012. Emily H. Menashes... the keyword search. Locate the document you wish to comment on from the resulting list and click on... governing fishing by U.S. vessels in accordance with the FMP appear at subpart H of 50 CFR part 600 and 50...

  9. 50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... be up to 5 percent of the ex-vessel production value of all post-reduction Longline Subsector... Auditor shall post on the Website no later than 5 p.m. (Pacific time) on the following Tuesday all of the details of such Offer as set forth on the Offer Form. In addition, the Auditor shall post, as available to...

  10. 50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... be up to 5 percent of the ex-vessel production value of all post-reduction Longline Subsector... Auditor shall post on the Website no later than 5 p.m. (Pacific time) on the following Tuesday all of the details of such Offer as set forth on the Offer Form. In addition, the Auditor shall post, as available to...

  11. 50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... be up to 5 percent of the ex-vessel production value of all post-reduction Longline Subsector... Auditor shall post on the Website no later than 5 p.m. (Pacific time) on the following Tuesday all of the details of such Offer as set forth on the Offer Form. In addition, the Auditor shall post, as available to...

  12. 50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... be up to 5 percent of the ex-vessel production value of all post-reduction Longline Subsector... Auditor shall post on the Website no later than 5 p.m. (Pacific time) on the following Tuesday all of the details of such Offer as set forth on the Offer Form. In addition, the Auditor shall post, as available to...

  13. 50 CFR 600.1105 - Longline catcher processor subsector of the Bering Sea and Aleutian Islands (BSAI) non-pollock...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... be up to 5 percent of the ex-vessel production value of all post-reduction Longline Subsector... Auditor shall post on the Website no later than 5 p.m. (Pacific time) on the following Tuesday all of the details of such Offer as set forth on the Offer Form. In addition, the Auditor shall post, as available to...

  14. Beacons of Light, Rays, or Sun Catchers? A Case Study of the Positioning of Literacy Teachers and Their Knowledge in Neoliberal Times

    ERIC Educational Resources Information Center

    Hibbert, Kathryn M.; Heydon, Rachel M.; Rich, Sharon J.

    2008-01-01

    This paper reports on a case study of a "lead literacy teacher" initiative in one Canadian province. This initiative is related to a ''minority world'' trend in teacher in-service that seeks to develop "experts" in a field with the intent that such experts can help other teachers to raise student achievement for the betterment…

  15. Fault Tolerant Homopolar Magnetic Bearings

    NASA Technical Reports Server (NTRS)

    Li, Ming-Hsiu; Palazzolo, Alan; Kenny, Andrew; Provenza, Andrew; Beach, Raymond; Kascak, Albert

    2003-01-01

    Magnetic suspensions (MS) satisfy the long life and low loss conditions demanded by satellite and ISS based flywheels used for Energy Storage and Attitude Control (ACESE) service. This paper summarizes the development of a novel MS that improves reliability via fault tolerant operation. Specifically, flux coupling between poles of a homopolar magnetic bearing is shown to deliver desired forces even after termination of coil currents to a subset of failed poles . Linear, coordinate decoupled force-voltage relations are also maintained before and after failure by bias linearization. Current distribution matrices (CDM) which adjust the currents and fluxes following a pole set failure are determined for many faulted pole combinations. The CDM s and the system responses are obtained utilizing 1D magnetic circuit models with fringe and leakage factors derived from detailed, 3D, finite element field models. Reliability results are presented vs. detection/correction delay time and individual power amplifier reliability for 4, 6, and 7 pole configurations. Reliability is shown for two success criteria, i.e. (a) no catcher bearing contact following pole failures and (b) re-levitation off of the catcher bearings following pole failures. An advantage of the method presented over other redundant operation approaches is a significantly reduced requirement for backup hardware such as additional actuators or power amplifiers.

  16. Space qualification tests of the PAMELA instrument

    NASA Astrophysics Data System (ADS)

    Sparvoli, R.; Basili, A.; Bencardino, R.; Casolino, M.; de Pascale, M. P.; Furano, G.; Menicucci, A.; Minori, M.; Morselli, A.; Picozza, P.; Wischnewski, R.; Bakaldin, A.; Galper, A. M.; Koldashov, S. V.; Korotkov, M. G.; Mikhailov, V. V.; Voronov, S. A.; Yurkin, Y.; Adriani, O.; Bonechi, L.; Bongi, M.; Papini, P.; Ricciarini, S. B.; Spillantini, P.; Straulino, S.; Taccetti, F.; Vannuccini, E.; Castellini, G.; Boezio, M.; Bonvicini, M.; Mocchiutti, E.; Schiavon, P.; Vacchi, A.; Zampa, G.; Zampa, N.; Carlson, P.; Lund, J.; Lundquist, J.; Orsi, S.; Pearce, M.; Barbarino, G. C.; Campana, D.; Osteria, G.; Rossi, G.; Russo, S.; Boscherini, M.; Menn, W.; Simon, M.; Bongiorno, L.; Ricci, M.; Ambriola, M.; Bellotti, R.; Cafagna, F.; Circella, M.; de Marzo, C.; Giglietto, N.; Mirizzi, N.; Romita, M.; Spinelli, P.; Bogomolov, E.; Krutkov, S.; Vasiljev, G.; Bazilevskaja, G. A.; Kvashnin, A. N.; Logachev, V. I.; Makhmutov, V. S.; Maksumov, O. S.; Stozhkov, Yu. I.; Mitchell, J. W.; Streitmatter, R. E.; Stochaj, S. J.

    PAMELA is a satellite-borne experiment which will measure the antiparticle component of cosmic rays over an extended energy range and with unprecedented accuracy. The apparatus consists of a permanent magnetic spectrometer equipped with a double-sided silicon microstrip tracking system and surrounded by a scintillator anticoincidence system. A silicon tungsten imaging calorimeter, complemented by a scintillator shower tail catcher, and a transition radiation detector perform the particle identification task. Fast scintillators are used for Time-of-Flight measurements and to provide the primary trigger. A neutron detector is finally provided to extend the range of particle measurements to the TeV region. PAMELA will fly on-board of the Resurs-DK1 satellite, which will be put into a semi-polar orbit in 2005 by a Soyuz rocket. We give a brief review of the scientific issues of the mission and report about the status of the experiment few months before the launch.

  17. Cartridge Casing Catcher With Reduced Firearm Ejection Port Flash and Noise

    DTIC Science & Technology

    2009-05-26

    acoustic tuner structure comprises at least one of a quarter wave tuner, a Quincke tuner, and a Helmholtz tuner. The magnetic material comprises magnetic...of noise) will be attenuated. FIG. 2B illustrates a Herschel- Quincke (usually simply called Quincke ) or interference tuner 10’. The Quincke tnner... Quincke tuner, and a Helmholtz resonator similar to the acoustic tnners illustrated in FIGS. 2(A-C), respectively. The acoustic tnner structure 240 of

  18. Staging gender and sexuality in experimental TV entertainment.

    PubMed

    Mühleisen, Wencke

    2008-01-01

    Via examples from recent Norwegian experimental TV shows, this article explores the function of "eye-catchers," parodic (hetero)sexualization, female masquerade and neo-masculinization as strategies for "repetitions with a difference" of traditional styles and motifs by female show hosts, as well as the queer gendering and sexualization of men and masculinities by their male counterparts. Both formats represent innovative renegotiations of gender and sexuality that illustrate the relationship between post-modernism and queer aesthetics.

  19. Resistance of Concrete Masonry Walls With Membrane Catcher Systems Subjected to Blast Loading

    DTIC Science & Technology

    2010-12-01

    fiber reinforcement) sprayed-on polymers. The early versions of this approach were a polyurea -based coating similar to that used for truck bed liners...displacement. Figure 5 illustrates a resistance function using a polyurea membrane retrofit, and Figure 6 shows the complete resistance function. The...resistance function is truncated for these conditions: Figure 5. Resistance function — 3 mm thick polyurea retrofit DIsplacement (mm) P re s s u re

  20. 78 FR 69592 - Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-20

    ...) LOA using hook- and-line or pot gear, American Fisheries Act (AFA) catcher/processors (C/P), Amendment 80 (A80) C/Ps, C/P vessels using pot gear, and C/P vessels using hook-and-line gear in the Bering Sea... meters) LOA using hook-and-line or pot gear, AFA C/P vessels, A80 C/P vessels, C/P vessels using pot gear...

  1. Crowd-Sourcing Seismic Data: Lessons Learned from the Quake-Catcher Network

    NASA Astrophysics Data System (ADS)

    Cochran, E. S.; Sumy, D. F.; DeGroot, R. M.; Clayton, R. W.

    2015-12-01

    The Quake Catcher Network (QCN; qcn.caltech.edu) uses low cost micro-electro-mechanical system (MEMS) sensors hosted by volunteers to collect seismic data. Volunteers use accelerometers internal to laptop computers, phones, tablets or small (the size of a matchbox) MEMS sensors plugged into desktop computers using a USB connector to collect scientifically useful data. Data are collected and sent to a central server using the Berkeley Open Infrastructure for Network Computing (BOINC) distributed computing software. Since 2008, when the first citizen scientists joined the QCN project, sensors installed in museums, schools, offices, and residences have collected thousands of earthquake records. We present and describe the rapid installations of very dense sensor networks that have been undertaken following several large earthquakes including the 2010 M8.8 Maule Chile, the 2010 M7.1 Darfield, New Zealand, and the 2015 M7.8 Gorkha, Nepal earthquake. These large data sets allowed seismologists to develop new rapid earthquake detection capabilities and closely examine source, path, and site properties that impact ground shaking at a site. We show how QCN has engaged a wide sector of the public in scientific data collection, providing the public with insights into how seismic data are collected and used. Furthermore, we describe how students use data recorded by QCN sensors installed in their classrooms to explore and investigate earthquakes that they felt, as part of 'teachable moment' exercises.

  2. Molecular catchers for pharmacologically active substances in wastewaters, a theoretical study

    NASA Astrophysics Data System (ADS)

    Salazar Valencia, P. J.; Pérez Merchancano, S. T.; Paredes, H.; Bolívar Marinez, L. E.

    2016-08-01

    A basic and pressing need in the treatment of residual waste waters for urban and rural centers is the removal of pharmacological active residues from them, these resides are originated in a wide array of domestic, agricultural and industrial sources and can't be removed in the residual waters treatment plants by conventional methods, the result is the incorporation of them into the ecosystem altering the physiology and behavior of living organisms. Among the most active pharmacological substances found in very high concentration in residual waters is paracetamol, an analgesic of very wide excessive use due to its ease of access and low cost [1]. No pharmacological substance is entirely absorbed by the human organism and therefore a wide family of molecular residues is excreted by the urinary tract. In this work we have used the AM1 (Austin Model 1), PM3 (Parametric Method 3) and ZINDO/CI semiempirical methods, from the NDO (Neglect Differential Overlap) family [2] to study and observe the structural, electronic and optical characteristics of paracetamol while immersed in different basic and acidic aqueous environments, either alone or interacting with lignosulphonates. We have previously found that lignosulphonates, a lignin derivatives of wide industrial applications, can be engineered as a binding and flocculant agent and acts as molecular catchers therefore showing the potential to be used as a mean to filter and eliminate molecular residues from the residual waters [3].

  3. The design of an optimal fog water collector: A theoretical analysis

    NASA Astrophysics Data System (ADS)

    Regalado, Carlos M.; Ritter, Axel

    2016-09-01

    We investigate the collection efficiency of different fog water catchers assemblies (mainly flat and cylindrical structures equipped with several screens of staggered filaments) by means of parametric equations which take into consideration both impaction and aerodynamic effects. We introduce different models that vary in complexity and range of applicability, and may be used to analyze the effect that geometry, number of screens, spacing and inclination of the filament strands have on the fog water yield of the collector. Increasing the number of impacting screens, nR, is shown to improve the collection efficiency up to an optimum for nR = 3-5; beyond nR > 5 impermeability to the airflow makes the fog catcher less efficient. Geometry of the collector is shown to be relatively important: unless wind direction varies widely, the rectangular flat design is preferred over the cylindrical one, because of its larger drag, i.e. increased aerodynamic efficiency, ηa. In fact ηa is shown to be limiting, such that values over ηa > 50% are difficult to attain. By contrast the impaction efficiency, ηimp, of fog water droplets onto multiple nR parallel screens of filaments may reach theoretical values of ηimp > 80%. Inclination of the impacting screens over the vertical may slightly reduce ηimp, but this may be compensated by a reduction in flow resistance, i.e. increased aerodynamic efficiency.

  4. Laguna Potrok Aike, Argentina: the first non-tropical environmental record in South America extending far beyond the Late-Glacial - a progress report

    NASA Astrophysics Data System (ADS)

    Zolitschka, B.; Anselmetti, F.; Ariztegui, D.; Corbella, H.; Francus, P.; Gebhardt, C.; Lücke, A.; Ohlendorf, C.; Schäbitz, F.; Pasado Science Team

    2009-04-01

    Within the framework of the ICDP-funded "Potrok Aike maar lake sediment archive drilling project" (PASADO) an international team of scientists carried out interdisciplinary research at the unique mid-Pleistocene (770 ka) maar lake of Laguna Potrok Aike in southern Patagonia (Province of Santa Cruz, Argentina). This lake is very sensitive to variations in southern hemispheric wind and pressure systems and thus holds a unique and continuous lacustrine record of climatic and ecological variability of global significance. Moreover, Southern Patagonia with its many active volcanoes is an ideal location to better understand the regional history of volcanism. These are two challenging geo-scientific themes that need to be tackled, especially as both of them have an increasing socio-economic relevance. Three months of drilling activities that finished last November 2008 were carried out by DOSECC from the drilling platform R/V "Kerry Kelts". More than 500 m of lacustrine sediments were recovered. This sedimentary archive will provide (1) new insights into the processes of regional back arc volcanism within the Pali Aike Volcanic Field itself as well as the more distant explosive volcanism of the Andean mountain chains; and, (2) high-resolution (decadal) quantitative climate and environmental reconstructions supported by multiple dating and stratigraphic correlations. Marine - ice core - terrestrial linkages will be emphasized as well as the incorporation of results from global climate modelling simulations for the last ca. 100 ka. The two drilled sites in the central deep basin of Laguna Potrok Aike have been selected based on four seismic surveys carried out between 2003 and 2005. Sediments were recovered at both drilled sites down to a subbottom depth of slightly more than 100 m using the GLAD800 drill rig with the hydraulic piston corer tool (HPC) at water depths varying between 95 and 100 m. The total core recovery is 94%. On-site core logging with the multi sensor core logger (MSCL) documents an excellent correlation between the four recovered holes drilled at Site 1 as well as with the three holes obtained from Site 2 which is located ca. 700 m south of Site 1. Additionally, a variety of sedimentological, physical and geochemical analyses were carried out on the core catcher samples in the field laboratory. Preliminary interpretation of all data that is available before core opening indicates that the record may go back in time as far as to the ending of oxygen isotope stage 5. Acknowledgements This research is supported by the International Continental Scientific Drilling Program (ICDP) in the framework of the "Potrok Aike Maar Lake Sediment Archive Drilling Project" (PASADO). Funding was provided by the ICDP, the German Science Foundation (DFG), the Swiss National Science Foundation (SNF), the Natural Sciences and Engineering Research Council of Canada (NSERC), the Swedish Vetenskapsradet (VR) and the University of Bremen.

  5. Employing the Quake-Catcher Network (QCN) to Investigate Site Effects in Christchurch, New Zealand Using the κ Method

    NASA Astrophysics Data System (ADS)

    Neighbors, C.; Liao, E. J.; Cochran, E. S.; Chung, A. I.; Lawrence, J.; Kaiser, A. E.; Fry, B.; Christensen, C. M.

    2011-12-01

    The 3 September 2010 Mw 7.1 Darfield earthquake was felt over 900 km from the source. The maximum felt-intensity was estimated to be at Modified Mercalli Intensity (MMI) 9 and measured near-field accelerations were found to exceed 1 g. The mainshock damaged or destroyed over 100,000 buildings and spatially variable effects (such as liquefaction, slumping, and amplification) were observed throughout the city of Christchurch. Following the mainshock, a vigorous aftershock sequence has continued for months in the region. To record the aftershocks for early warning and other hazard mitigation efforts, a network of over 192 low-cost, 14-bit accelerometers were deployed in local buildings as part of the Quake-Catcher Network Rapid Aftershock Mobilization Project (RAMP). With a large number of sensors covering a city area of ~300 km2, the RAMP collected vastly more data and at a finer scale relative to the deployment of costly traditional broadband sensors. Recent comparison of the signal-to-noise quality of the 14-bit QCN sensors to the strong motion 24-bit New Zealand GeoNet sensors show similar responses. Initial analyses of the data show that aftershocks of magnitude >M4.5 within 30 km of the hypocentral distance were well recorded by QCN sensors. Utilizing the dense coverage, we investigate local site amplification by analyzing the spectra decay parameter, kappa (κ). Following the routine outlined in Douglas et al. (2010, Pure Appl. Geophys.), whereby a 5-sec S-wave window is used to calculate the Fourier spectra and κ for each station, investigations of κ values between stations are used to estimate site conditions on seismic wave behavior at each location. Results from this study will be compared to work performed by New Zealand researchers using other methods to calculate site response, such as the spectral ratio method. Together, these studies will highlight areas of the Christchurch region that may be more susceptible to ground shaking, which can be used to mitigate loss prior to future large earthquakes.

  6. Intimate examination teaching with volunteers: implementation and assessment at the University of Antwerp.

    PubMed

    Hendrickx, Kristin; De Winter, Benedicte Y; Wyndaele, Jean-Jacques; Tjalma, Wiebren A A; Debaene, Luc; Selleslags, Bert; Mast, Frieda; Buytaert, Philippe; Bossaert, Leo

    2006-10-01

    Teaching intimate physical examinations in medical schools generates practical, didactical and ethical problems. At the University of Antwerp, a unique program with intimate examination assistants (IEA) was implemented for fifth year's undergraduate students. They learn gynaecological and urological skills in healthy volunteers. Technical, communicative and attitude aspects are taken into account. Description of the implementation of the project. Assessment of the project by questionnaires, written reflections and round table conferences. The results provide detailed information about the student's perceptions of each component of the program as well as the perceptions of the IEA's and the teachers. The multilevel evaluation of the program supports the surplus value of working with IEA's in medical education. The eye-catcher in this program is the integration of clinical skills with communicative skills and attention for students' attitude. Working with IEA's for intimate examinations represents a benefit in medical education by lowering the student's threshold to perform the intimate physical examination on both men and women during their fulltime clerkships.

  7. Epidemiology of shoulder and elbow pain in youth baseball players.

    PubMed

    Matsuura, Tetsuya; Suzue, Naoto; Iwame, Toshiyuki; Arisawa, Kokichi; Fukuta, Shoji; Sairyo, Koichi

    2016-01-01

    There are relatively few published epidemiological studies examining the differences in the risk of shoulder and elbow pain in young baseball players. The purpose of this study was to investigate risk factors for shoulder and elbow pain in child and adolescent baseball players. A total of 1563 players aged 7 to 12 years participated in this investigation. Subjects were asked whether they had experienced episodes of shoulder or elbow pain. We investigated the following risk factors for shoulder and elbow pain: age, position, years of baseball experience, and training hours per week. Data from the groups with and without shoulder and elbow pain were analyzed using multivariate logistic regression models. Among the 1563 participants, 15.9% and 29.2% reported episodes of shoulder and elbow pain, respectively. Multivariate analysis showed that shoulder pain was associated with age 10, 11, and 12 years, and that elbow pain was associated with age 10, 11, and 12 years, playing catcher, and >2 years of baseball experience. Training hours per week were not associated with either shoulder or elbow pain. In over 1000 baseball players aged 7 to 12 years, 15.9% reported episodes of shoulder pain, while 29.2% reported elbow pain in the throwing arm. The associated risk factors were different for each type of pain. Shoulder pain was associated with increased age while elbow pain was associated with increased age, increased years of baseball experience, and playing catcher.

  8. Data-Based Interval Throwing Programs for Collegiate Softball Players

    PubMed Central

    Axe, Michael J.; Windley, Thomas C.; Snyder-Mackler, Lynn

    2002-01-01

    Objective: To construct interval throwing programs followed by a simulated game for collegiate softball players at all positions. The programs are intended to be used as functional progressions within a comprehensive rehabilitation program for an injured athlete or to augment off-season conditioning workouts. Design and Setting: We collected data over a single season of National Collegiate Athletic Association softball at the University of Delaware and Goldey Beacom College. We observed 220 half-innings of play and 2785 pitches during data collection. Subjects: The subjects were collegiate-level softball players at all positions of play. Measurements: We recorded the number of pitches for pitchers. For catchers, we recorded the number of sprints to back up a play, time in the squat stance, throws back to the pitcher, and the perceived effort and distance of all other throws. We also collected the perceived effort and distance of all throws for infielders and outfielders. Results: Pitchers threw an average of 89.61 pitches per game; catchers were in the squat stance 14.13 minutes per game; infielders threw the ball between 4.28 times per game and 6.30 times per game; and outfielders threw distances of up to 175 feet. Conclusions: We devised the interval throwing programs from the data collected, field dimensions, the types of injuries found to occur in softball, and a general understanding of tissue healing. We designed programs that allow a safe and efficient progressive return to sport. PMID:12937435

  9. Normal and Oblique Impact of Cylindro-Conical and Cylindrical Projectiles on Metallic Plates

    DTIC Science & Technology

    1985-06-01

    light grid for projcrtile rpcovery, and a witness paper marked initially at the extension of the barrel centerline placed on the front of the catcher...transducer were obtained for experimer-ti -iv’. lving normal impact on 3.175-mm-thick 2024-0 aluminum tatctýs &truck at and just above the ballistic limit...spite of the presence at its rear of a plastic gas check. These particles also prevented the use of a fine copper-wire grid conducting a current whose

  10. Dynamics Simulation Model for Space Tethers

    NASA Technical Reports Server (NTRS)

    Levin, E. M.; Pearson, J.; Oldson, J. C.

    2006-01-01

    This document describes the development of an accurate model for the dynamics of the Momentum Exchange Electrodynamic Reboost (MXER) system. The MXER is a rotating tether about 100-km long in elliptical Earth orbit designed to catch payloads in low Earth orbit and throw them to geosynchronous orbit or to Earth escape. To ensure successful rendezvous between the MXER tip catcher and a payload, a high-fidelity model of the system dynamics is required. The model developed here quantifies the major environmental perturbations, and can predict the MXER tip position to within meters over one orbit.

  11. Initial geochemistry data of the Lake Ohrid (Macedonia, Albania) "DEEP" site sediment record: The ICDP SCOPSCO drilling project

    NASA Astrophysics Data System (ADS)

    Francke, Alexander; Wagner, Bernd; Krastel, Sebastian; Lindhorst, Katja; Mantke, Nicole; Klinghardt, Dorothea

    2014-05-01

    Lake Ohrid, located at the border of Macedonia and Albania is about 30 km long, 15 km wide and up to 290 m deep. Formed within a tectonic graben, Lake Ohrid is considered to be the oldest lake in Europe. The ICDP SCOPSCO (Scientific Collaboration of Past Speciation Conditions in Lake Ohrid) deep drilling campaign at Lake Ohrid in spring 2013 aimed (a) to obtain more precise information about the age and origin of the lake, (b) to unravel the seismotectonic history of the lake area including effects of major earthquakes and associated mass wasting events, (c) to obtain a continuous record containing information on volcanic activities and climate changes in the central northern Mediterranean region, and (d) to better understand the impact of major geological/environmental events on general evolutionary patterns and shaping an extraordinary degree of endemic biodiversity as a matter of global significance. Drilling was carried out by DOSECC (Salt Lake City, USA) using the DLDS (Deep Lake Drilling System) with a hydraulic piston corer for surface sediments and rotation drilling for harder, deeper sediments. Overall, about 2,100 m of sediment were recovered from 4 drill sites. At the "DEEP" site in the center of the lake, seismic data indicated a maximum sediment fill of ca. 700 m, of which the uppermost 568 m sediment were recovered. Initial data from core catcher samples and on-site susceptibility measurements indicate that the sediment sequence covers more than 1.2 million years and provides a continuous archive of environmental and climatological variability in the area. Currently, core opening, core description, XRF and MSCL -scanning, core correlation, and sub-sampling of the sediment cores from the "DEEP" site is conducted at the University of Cologne. High-resolution geochemical data obtained from XRF-scanning imply that the sediments from the "DEEP" site are highly sensitive to climate and environmental variations in the Balkan area over the last few glacial-interglacial cycles. Interglacial periods are characterized by high Ca counts, likely associated with a high content of calcite in the sediments. Previous studies have shown that the calcite contents in sediments from Lake Ohrid are predominantly triggered by precipitation of endogenic calcite resulting from enhanced photosynthesis and higher temperatures. Moreover, high Ca counts mostly correspond to low K counts indicating reduced clastic input and a denser vegetation cover in the catchment. In contrast, high K and low Ca counts characterize glacial periods, indicating reduced precipitation of endognic calcite and enhanced deposition of clastic material. The variations in Ca and K counts mainly represent climatic variations on a glacial-interglacial timescale. Inorganic geochemistry data shall also be used to improve the age control of the "DEEP" site sequence. First findings of macroscopic tephra horizons allow a preliminary age control on the sediment succession, and peaks in K, Sr, Zr, and magnetic susceptibility might indicate the occurrence of cryptotephralayers in the sediment sequence.

  12. Optimizing performance by improving core stability and core strength.

    PubMed

    Hibbs, Angela E; Thompson, Kevin G; French, Duncan; Wrigley, Allan; Spears, Iain

    2008-01-01

    Core stability and core strength have been subject to research since the early 1980s. Research has highlighted benefits of training these processes for people with back pain and for carrying out everyday activities. However, less research has been performed on the benefits of core training for elite athletes and how this training should be carried out to optimize sporting performance. Many elite athletes undertake core stability and core strength training as part of their training programme, despite contradictory findings and conclusions as to their efficacy. This is mainly due to the lack of a gold standard method for measuring core stability and strength when performing everyday tasks and sporting movements. A further confounding factor is that because of the differing demands on the core musculature during everyday activities (low load, slow movements) and sporting activities (high load, resisted, dynamic movements), research performed in the rehabilitation sector cannot be applied to the sporting environment and, subsequently, data regarding core training programmes and their effectiveness on sporting performance are lacking. There are many articles in the literature that promote core training programmes and exercises for performance enhancement without providing a strong scientific rationale of their effectiveness, especially in the sporting sector. In the rehabilitation sector, improvements in lower back injuries have been reported by improving core stability. Few studies have observed any performance enhancement in sporting activities despite observing improvements in core stability and core strength following a core training programme. A clearer understanding of the roles that specific muscles have during core stability and core strength exercises would enable more functional training programmes to be implemented, which may result in a more effective transfer of these skills to actual sporting activities.

  13. 20 CFR 666.140 - Which individuals receiving services are included in the core indicators of performance?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... included in the core indicators of performance? 666.140 Section 666.140 Employees' Benefits EMPLOYMENT AND... the core indicators of performance? (a)(1) The core indicators of performance apply to all individuals... informational activities. (WIA sec. 136(b)(2)(A).) (2) Self-service and informational activities are those core...

  14. A PILOT STUDY OF CORE STABILITY AND ATHLETIC PERFORMANCE: IS THERE A RELATIONSHIP?

    PubMed Central

    Sharrock, Chris; Cropper, Jarrod; Mostad, Joel; Johnson, Matt

    2011-01-01

    Study Design: Correlation study Objectives: To objectively evaluate the relationship between core stability and athletic performance measures in male and female collegiate athletes. Background: The relationship between core stability and athletic performance has yet to be quantified in the available literature. The current literature does not demonstrate whether or not core strength relates to functional performance. Questions remain regarding the most important components of core stability, the role of sport specificity, and the measurement of core stability in relation to athletic performance. Methods: A sample of 35 volunteer student athletes from Asbury College (NAIA Division II) provided informed consent. Participants performed a series of five tests: double leg lowering (core stability test), the forty yard dash, the T-test, vertical jump, and a medicine ball throw. Participants performed three trials of each test in a randomized order. Results: Correlations between the core stability test and each of the other four performance tests were determined using a General Linear Model. Medicine ball throw negatively correlated to the core stability test (r –0.389, p=0.023). Participants that performed better on the core stability test had a stronger negative correlation to the medicine ball throw (r =–0.527). Gender was the most strongly correlated variable to core strength, males with a mean measurement of double leg lowering of 47.43 degrees compared to females having a mean of 54.75 degrees. Conclusions: There appears to be a link between a core stability test and athletic performance tests; however, more research is needed to provide a definitive answer on the nature of this relationship. Ideally, specific performance tests will be able to better define and to examine relationships to core stability. Future studies should also seek to determine if there are specific sub-categories of core stability which are most important to allow for optimal training and performance for individual sports. PMID:21713228

  15. Launch of the space experiment PAMELA

    NASA Astrophysics Data System (ADS)

    Casolino, M.; Picozza, P.; Altamura, F.; Basili, A.; De Simone, N.; Di Felice, V.; De Pascale, M. P.; Marcelli, L.; Minori, M.; Nagni, M.; Sparvoli, R.; Galper, A. M.; Mikhailov, V. V.; Runtso, M. F.; Voronov, S. A.; Yurkin, Y. T.; Zverev, V. G.; Castellini, G.; Adriani, O.; Bonechi, L.; Bongi, M.; Taddei, E.; Vannuccini, E.; Fedele, D.; Papini, P.; Ricciarini, S. B.; Spillantini, P.; Ambriola, M.; Cafagna, F.; De Marzo, C.; Barbarino, G. C.; Campana, D.; De Rosa, G.; Osteria, G.; Russo, S.; Bazilevskaja, G. A.; Kvashnin, A. N.; Maksumov, O.; Misin, S.; Stozhkov, Yu. I.; Bogomolov, E. A.; Krutkov, S. Yu.; Nikonov, N. N.; Bonvicini, V.; Boezio, M.; Lundquist, J.; Mocchiutti, E.; Vacchi, A.; Zampa, G.; Zampa, N.; Bongiorno, L.; Ricci, M.; Carlson, P.; Hofverberg, P.; Lund, J.; Orsi, S.; Pearce, M.; Menn, W.; Simon, M.

    2008-08-01

    PAMELA is a satellite borne experiment designed to study with great accuracy cosmic rays of galactic, solar, and trapped nature in a wide energy range (protons 80 MeV-700 GeV, electrons 50 MeV-400 GeV). Main objective is the study of the antimatter component: antiprotons (80 MeV-190 GeV), positrons (50 MeV-270 GeV) and search for antimatter with a precision of the order of 10 -8. The experiment, housed on board the Russian Resurs-DK1 satellite, was launched on June 15th, 2006 in a 350 × 600 km orbit with an inclination of 70°. The detector is composed of a series of scintillator counters arranged at the extremities of a permanent magnet spectrometer to provide charge, time-of-flight, and rigidity information. Lepton/hadron identification is performed by a silicon-tungsten calorimeter and a neutron detector placed at the bottom of the device. An anticounter system is used offline to reject false triggers coming from the satellite. In self-trigger mode the calorimeter, the neutron detector, and a shower tail catcher are capable of an independent measure of the lepton component up to 2 TeV. In this work we describe the experiment, its scientific objectives, and the performance in the first months after launch.

  16. Rapid earthquake characterization using MEMS accelerometers and volunteer hosts following the M 7.2 Darfield, New Zealand, Earthquake

    USGS Publications Warehouse

    Lawrence, J. F.; Cochran, E.S.; Chung, A.; Kaiser, A.; Christensen, C. M.; Allen, R.; Baker, J.W.; Fry, B.; Heaton, T.; Kilb, Debi; Kohler, M.D.; Taufer, M.

    2014-01-01

    We test the feasibility of rapidly detecting and characterizing earthquakes with the Quake‐Catcher Network (QCN) that connects low‐cost microelectromechanical systems accelerometers to a network of volunteer‐owned, Internet‐connected computers. Following the 3 September 2010 M 7.2 Darfield, New Zealand, earthquake we installed over 180 QCN sensors in the Christchurch region to record the aftershock sequence. The sensors are monitored continuously by the host computer and send trigger reports to the central server. The central server correlates incoming triggers to detect when an earthquake has occurred. The location and magnitude are then rapidly estimated from a minimal set of received ground‐motion parameters. Full seismic time series are typically not retrieved for tens of minutes or even hours after an event. We benchmark the QCN real‐time detection performance against the GNS Science GeoNet earthquake catalog. Under normal network operations, QCN detects and characterizes earthquakes within 9.1 s of the earthquake rupture and determines the magnitude within 1 magnitude unit of that reported in the GNS catalog for 90% of the detections.

  17. Study of multi-kilowatt solar arrays for Earth orbit applications

    NASA Technical Reports Server (NTRS)

    Patterson, R. E.

    1983-01-01

    A miniaturized Cassegrainian concentrator (MCC) solar array concept is being developed with the objective of significantly reducing the recurring cost of multikilowatt solar arrays. The desired cost reduction is obtained as a result of using very small high efficiency solar cells in conjuction with low cost optics. The MCC single element concept incident slar radiation is reflected rom a primary parabolic reflector to a secondary hyperbolic reflector and finally to a 4 millimeter diameter solar cell. A light catcher cone is used to improve off axis performance. The solar cell is mounted to a heat fin. An element is approximately 13 millimeters thick which permits efficient launch stowage of the concentrator system panels without complex optical component deployments or retractions. The MCC elements are packed in bays within graphite epoxy frames and are electrically connected into appropriate series-parallel circuits. A MCC sngle element with a 21 sq cm entrance aperture and a 20 efficient, 0.25 sq cm gallium arsenide solar cell has the same power output as 30 sq cm of 11-percent efficiency (at 68 C) silicon solar cells.

  18. Vegetarianism and food perception. Selective visual attention to meat pictures.

    PubMed

    Stockburger, Jessica; Renner, Britta; Weike, Almut I; Hamm, Alfons O; Schupp, Harald T

    2009-04-01

    Vegetarianism provides a model system to examine the impact of negative affect towards meat, based on ideational reasoning. It was hypothesized that meat stimuli are efficient attention catchers in vegetarians. Event-related brain potential recordings served to index selective attention processes at the level of initial stimulus perception. Consistent with the hypothesis, late positive potentials to meat pictures were enlarged in vegetarians compared to omnivores. This effect was specific for meat pictures and obtained during passive viewing and an explicit attention task condition. These findings demonstrate the attention capture of food stimuli, deriving affective salience from ideational reasoning and symbolic meaning.

  19. High performance carbon nanotube-Si core-shell wires with a rationally structured core for lithium ion battery anodes.

    PubMed

    Fan, Yu; Zhang, Qing; Lu, Congxiang; Xiao, Qizhen; Wang, Xinghui; Tay, Beng Kang

    2013-02-21

    Core-shell Si nanowires are very promising anode materials. Here, we synthesize vertically aligned carbon nanotubes (CNTs) with relatively large diameters and large inter-wire spacing as core wires and demonstrate a CNT-Si core-shell wire composite as a lithium ion battery (LIB) anode. Owing to the rationally engineered core structure, the composite shows good capacity retention and rate performance. The excellent performance is superior to most core-shell nanowires previously reported.

  20. Energy Efficient Engine core design and performance report

    NASA Technical Reports Server (NTRS)

    Stearns, E. Marshall

    1982-01-01

    The Energy Efficient Engine (E3) is a NASA program to develop fuel saving technology for future large transport aircraft engines. Testing of the General Electric E3 core showed that the core component performance and core system performance necessary to meet the program goals can be achieved. The E3 core design and test results are described.

  1. Linking Anomalously Low Topographic Relief in the Taiwan Arc-Continent Collision to a Submarine Plateau South of the Collision.

    NASA Astrophysics Data System (ADS)

    Byrne, T. B.; Lin, A. T.; Su, C. C.; Lewis, J. C.; Liu, C. S.; Ouimet, W. B.; Chen, T. T.; Huang, C.

    2015-12-01

    Ouimet et al. (2014; submitted) have recently described broad areas of anomalously low relief and slope that straddle the topographic ridge crest in Taiwan. The areas are anomalous because Taiwan also preserves some of the steepest topography in the world, as expected from the high rates of convergence, exhumation and erosion. In addition, several age-elevation data sets (see Hsu et al. this meeting), using new and previously published ZrnFT, ZrnHe and ApFT ages, show exhumation cooling rates of 3 to 5 mm/yr since ~1.5-2.0 Ma, which is consistent with the exposure of reset zircons beneath the surfaces. Erosion rates of this magnitude, however, are expected to produce significant topographic relief, making it difficult to generate a topographic surface of low slope and low relief centered on the ridge crest. Very young ApFT and ZrnHe ages (e.g., < 0.5 Ma) also suggest a more recent acceleration in exhumation cooling. A relatively large area of low relief centered on the top of the submarine accretionary prism south of Taiwan may provide a solution for this conundrum. The area covers ca 1000 km2, has a mean elevation of ca 450 m below sea level and appears to be composed of hard, intact rocks rather than unlithified deep sea muds. Several attempts at gravity and piston coring failed to penetrate the substrate and samples retrieved in the core catcher include rounded clasts of quartz and siltstone. Geophysical studies also show high Vp velocities at relatively shallow depths beneath the sea floor, suggesting the removal of a significant volume of sediment and rock, presumably through erosion. We propose that this low relief plateau serves as a modern analog for the formation of the low relief surfaces that currently straddle the ridge crest in Taiwan. If this interpretation is correct, it suggests a tectonic model in which submarine erosion processes modulate vertical growth of the prism until collision of thick continental crust promotes uplift that outpaces erosion. This requires significant erosion rates (e.g., mm/yr) in the shallow water marine environment. Based on the young ApFT and ZrnHe ages, we propose that emergence of the prism occurred less than about a half a million years ago, and that this hypothesis could be tested by chronologic and thermochronologic data from cores retrieved through submarine drilling.

  2. Characterization of diagenetic siderites formed in recent and ancient ferruginous sediments of Lake Towuti, Indonesia.

    NASA Astrophysics Data System (ADS)

    Vuillemin, Aurele; Kallmeyer, Jens; Wagner, Dirk; Kemnitz, Helga; Wirth, Richard; Luecke, Andreas; Mayr, Christoph

    2016-04-01

    Authigenic minerals in lacustrine settings can be formed in the water column and within the sediment, abiotically and/or triggered by biological activity. Such minerals have been used as paleosalinity and paleoproductivity proxies, reflecting trophic state, and/or early diagenetic conditions. They have also been considered as potential biosignatures of past and present microbial activity. Here we present a study from Lake Towuti, a deep tectonic basin in Sulawesi, Indonesia. Its geographic position makes it a prime location to record paleoclimatic changes in the tropical Western Pacific warm pool in its sedimentary sequence. The ultramafic rocks and surrounding lateritic soils in the catchment area supply considerable amounts of iron and other metals to the lake. These elements further restrain primary productivity along with the development of specific microbial metabolic pathways involved in early diagenesis. Lake Towuti is stratified with anoxic conditions below 130 m, allowing metal reduction processes to take place in the hypolimnion. The extreme scarcity of sulphate and nitrate/nitrite make Lake Towuti's bottom waters a modern analogue for the Archaean Ocean. It was therefore chosen as a drilling target by the International Continental Drilling Program (ICDP). In May to July 2015, the Towuti Drilling Project recovered a total >1000 m of sediment core from three drilling sites, including a 114 m long core drilled with a contamination tracer dedicated to geomicrobiological studies. Heavy mineral fractions were extracted from core catcher samples and siderite crystals (FeCO3) were selected from different depths. Characterization of their habitus was achieved via SEM and TEM imaging. Preliminary results show that siderites grow from amorphous into nanocrystalline phases and form twinned aggregates developing into mosaic monocrystals with depth. Gradual filling of vugs and microporosity were observed along with inclusions of magnetite nanocrystals. Work in progress includes parallel δ13C measurements on bulk organic matter (OM) surrounding the minerals and on the siderites themselves to trace organic to inorganic carbon transfer associated with microbial respiration of OM and infer possible relationships to methane oxidation processes. Analysis of δ56Fe compositions will complement this dataset to highlight the role of dissimilatory Fe (III) reduction in siderite formation. We hypothesize that sedimentary siderite is formed by precipitation from pore water due to saturation resulting from microbial OM and iron respiration processes. A similar approach will be applied to vivianite crystals (Fe3(PO4)3ṡ8H2O) that were found concomitantly with siderite in sedimentary horizons intercalated with tephra layers.

  3. 20 CFR 666.140 - Which individuals receiving services are included in the core indicators of performance?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Which individuals receiving services are included in the core indicators of performance? 666.140 Section 666.140 Employees' Benefits EMPLOYMENT AND... the core indicators of performance? (a)(1) The core indicators of performance apply to all individuals...

  4. The effects of isolated and integrated 'core stability' training on athletic performance measures: a systematic review.

    PubMed

    Reed, Casey A; Ford, Kevin R; Myer, Gregory D; Hewett, Timothy E

    2012-08-01

    Core stability training, operationally defined as training focused to improve trunk and hip control, is an integral part of athletic development, yet little is known about its direct relation to athletic performance. This systematic review focuses on identification of the association between core stability and sports-related performance measures. A secondary objective was to identify difficulties encountered when trying to train core stability with the goal of improving athletic performance. A systematic search was employed to capture all articles related to athletic performance and core stability training that were identified using the electronic databases MEDLINE, CINAHL and SPORTDiscus™ (1982-June 2011). A systematic approach was used to evaluate 179 articles identified for initial review. Studies that performed an intervention targeted toward the core and measured an outcome related to athletic or sport performances were included, while studies with a participant population aged 65 years or older were excluded. Twenty-four in total met the inclusionary criteria for review. Studies were evaluated using the Physical Therapy Evidence Database (PEDro) scale. The 24 articles were separated into three groups, general performance (n = 8), lower extremity (n = 10) and upper extremity (n = 6), for ease of discussion. In the majority of studies, core stability training was utilized in conjunction with more comprehensive exercise programmes. As such, many studies saw improvements in skills of general strengths such as maximum squat load and vertical leap. Surprisingly, not all studies reported measurable increases in specific core strength and stability measures following training. Additionally, investigations that targeted the core as the primary goal for improved outcome of training had mixed results. Core stability is rarely the sole component of an athletic development programme, making it difficult to directly isolate its affect on athletic performance. The population biases of some studies of athletic performance also confound the results. Targeted core stability training provides marginal benefits to athletic performance. Conflicting findings and the lack of a standardization for measurement of outcomes and training focused to improve core strength and stability pose difficulties. Because of this, further research targeted to determine this relationship is necessary to better understand how core strength and stability affect athletic performance.

  5. Shoulder and elbow pain in elementary school baseball players: The results from a nation-wide survey in Japan.

    PubMed

    Takagishi, Kenji; Matsuura, Tetsuya; Masatomi, Takashi; Chosa, Etsuo; Tajika, Tsuyoshi; Watanabe, Mikihiko; Iwama, Tetsu; Otani, Toshiro; Inagaki, Katsunori; Ikegami, Hiroyasu; Aoki, Mitsuhiro; Kato, Ko; Okuwaki, Toru; Sairyo, Koichi; Kameyama, Yasushi; Maeda, Akira; Beppu, Moroe

    2017-07-01

    Despite recommendations on how to prevent baseball injuries in youths by the Japanese Society of Clinical Sports Medicine, shoulder and elbow pain still frequently occurs in young baseball players. We conducted a questionnaire survey among baseball players at elementary schools across the country to understand the practice conditions of players, examining the risk factors of shoulder and elbow pain in baseball players. The questionnaire survey was conducted among elementary school baseball players as members of the Baseball Federation of Japan in September 2015. A total of 8354 players belonging to 412 teams (average age: 8.9) responded to the survey. Among 7894 players who did not have any shoulder and/or elbow pain in September 2014, elbow pain was experienced in 12.3% of them, shoulder pain in 8.0% and shoulder and/or elbow pain in 17.4% during the previous one year. A total of 2835 (39.9% of the total) practiced four days or more per week and 97.6% practiced 3 h or more per day on Saturdays and Sundays. The risk factors associated shoulder and elbow pain included a male sex, older age, pitchers and catchers, and players throwing more than 50 balls per day. It has been revealed that Japanese elementary school baseball players train too much. Coaches should pay attention to older players, male players, pitchers and catchers in order to prevent shoulder and elbow pain. Furthermore, elementary school baseball players should not be allowed to throw more than 50 balls per day. Retrospective cohort study. Copyright © 2017 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

  6. Crowd-Sourcing Seismic Data for Education and Research Opportunities with the Quake-Catcher Network

    NASA Astrophysics Data System (ADS)

    Sumy, D. F.; DeGroot, R. M.; Benthien, M. L.; Cochran, E. S.; Taber, J. J.

    2016-12-01

    The Quake Catcher Network (QCN; quakecatcher.net) uses low cost micro-electro-mechanical system (MEMS) sensors hosted by volunteers to collect seismic data. Volunteers use accelerometers internal to laptop computers, phones, tablets or small (the size of a matchbox) MEMS sensors plugged into desktop computers using a USB connector to collect scientifically useful data. Data are collected and sent to a central server using the Berkeley Open Infrastructure for Network Computing (BOINC) distributed computing software. Since 2008, sensors installed in museums, schools, offices, and residences have collected thousands of earthquake records, including the 2010 M8.8 Maule, Chile, the 2010 M7.1 Darfield, New Zealand, and 2015 M7.8 Gorkha, Nepal earthquakes. In 2016, the QCN in the United States transitioned to the Incorporated Research Institutions for Seismology (IRIS) Consortium and the Southern California Earthquake Center (SCEC), which are facilities funded through the National Science Foundation and the United States Geological Survey, respectively. The transition has allowed for an influx of new ideas and new education related efforts, which include focused installations in several school districts in southern California, on Native American reservations in North Dakota, and in the most seismically active state in the contiguous U.S. - Oklahoma. We present and describe these recent educational opportunities, and highlight how QCN has engaged a wide sector of the public in scientific data collection, particularly through the QCN-EPIcenter Network and NASA Mars InSight teacher programs. QCN provides the public with information and insight into how seismic data are collected, and how researchers use these data to better understand and characterize seismic activity. Lastly, we describe how students use data recorded by QCN sensors installed in their classrooms to explore and investigate felt earthquakes, and look towards the bright future of the network.

  7. The Effects of Isolated and Integrated ‘Core Stability’ Training on Athletic Performance Measures

    PubMed Central

    Reed, Casey A.; Ford, Kevin R.; Myer, Gregory D.; Hewett, Timothy E.

    2014-01-01

    Background Core stability training, operationally defined as training focused to improve trunk and hip control, is an integral part of athletic development, yet little is known about its direct relation to athletic performance. Objective This systematic review focuses on identification of the association between core stability and sports-related performance measures. A secondary objective was to identify difficulties encountered when trying to train core stability with the goal of improving athletic performance. Data sources A systematic search was employed to capture all articles related to athletic performance and core stability training that were identified using the electronic databases MEDLINE, CINAHL and SPORTDiscus™ (1982-June2011). Study selection A systematic approach was used to evaluate 179 articles identified for initial review. Studies that performed an intervention targeted toward the core and measured an outcome related to athletic or sport performances were included, while studies with a participant population aged 65 years or older were excluded. Twenty-four in total met the inclusionary criteria for review. Study appraisal and synthesis methods Studies were evaluated using the Physical Therapy Evidence Database (PEDro) scale. The 24 articles were separated into three groups, general performance (n = 8), lower extremity (n = 10) and upper extremity (n = 6), for ease of discussion. Results In the majority of studies, core stability training was utilized in conjunction with more comprehensive exercise programmes. As such, many studies saw improvements in skills of general strengths such as maximum squat load and vertical leap. Surprisingly, not all studies reported measurable increases in specific core strength and stability measures following training. Additionally, investigations that targeted the core as the primary goal for improved outcome of training had mixed results. Limitations Core stability is rarely the sole component of an athletic development programme, making it difficult to directly isolate its affect on athletic performance. The population biases of some studies of athletic performance also confound the results. Conclusions Targeted core stability training provides marginal benefits to athletic performance. Conflicting findings and the lack of a standardization for measurement of outcomes and training focused to improve core strength and stability pose difficulties. Because of this, further research targeted to determine this relationship is necessary to better understand how core strength and stability affect athletic performance. PMID:22784233

  8. Performing an allreduce operation on a plurality of compute nodes of a parallel computer

    DOEpatents

    Faraj, Ahmad

    2013-02-12

    Methods, apparatus, and products are disclosed for performing an allreduce operation on a plurality of compute nodes of a parallel computer, each node including at least two processing cores, that include: performing, for each node, a local reduction operation using allreduce contribution data for the cores of that node, yielding, for each node, a local reduction result for one or more representative cores for that node; establishing one or more logical rings among the nodes, each logical ring including only one of the representative cores from each node; performing, for each logical ring, a global allreduce operation using the local reduction result for the representative cores included in that logical ring, yielding a global allreduce result for each representative core included in that logical ring; and performing, for each node, a local broadcast operation using the global allreduce results for each representative core on that node.

  9. Core stability training: applications to sports conditioning programs.

    PubMed

    Willardson, Jeffrey M

    2007-08-01

    In recent years, fitness practitioners have increasingly recommended core stability exercises in sports conditioning programs. Greater core stability may benefit sports performance by providing a foundation for greater force production in the upper and lower extremities. Traditional resistance exercises have been modified to emphasize core stability. Such modifications have included performing exercises on unstable rather than stable surfaces, performing exercises while standing rather than seated, performing exercises with free weights rather than machines, and performing exercises unilaterally rather than bilaterally. Despite the popularity of core stability training, relatively little scientific research has been conducted to demonstrate the benefits for healthy athletes. Therefore, the purpose of this review was to critically examine core stability training and other issues related to this topic to determine useful applications for sports conditioning programs. Based on the current literature, prescription of core stability exercises should vary based on the phase of training and the health status of the athlete. During preseason and in-season mesocycles, free weight exercises performed while standing on a stable surface are recommended for increases in core strength and power. Free weight exercises performed in this manner are specific to the core stability requirements of sports-related skills due to moderate levels of instability and high levels of force production. Conversely, during postseason and off-season mesocycles, Swiss ball exercises involving isometric muscle actions, small loads, and long tension times are recommended for increases in core endurance. Furthermore, balance board and stability disc exercises, performed in conjunction with plyometric exercises, are recommended to improve proprioceptive and reactive capabilities, which may reduce the likelihood of lower extremity injuries.

  10. Determination of the Minimum Delta V Transfer Trajectory from a Low Earth Orbit to a Stable Orbit Around the Lagrangian Point L4 in a Restricted Four-Body System.

    DTIC Science & Technology

    1979-12-01

    the Moon revolves around the Earth. T. A . Heppenheimer (Ref 5) and his colleagues B. O’Leary and D. Kaplan (Ref 7) have also examined the pro- blem of...colony location and transfer trajectories. Heppenheimer found a 2/1 resonant orbit around the Earth 2S that could be reached from L2 by a Hohmann...would not allow a catcher near either of these points. In their work together, O’Leary, Kaplan and Heppenheimer found a transfer trajectory from L2

  11. Tako-tsubo-like syndrome, a case report.

    PubMed

    Patanè, Salvatore; Marte, Filippo

    2008-02-29

    Tako-tsubo-like (Japanese word for octopus-catcher) left ventricular dysfunction is an enigmatic cardiomyopathy. Typically, the patients have a history of recent stressful incidents immediately preceding onset of mild to moderate chest pain, have ST-segment elevation in leads V3 through V6, ECG changes that typically demonstrate diffuse T-wave inversions and abnormal QS-wave development, discrete wall motion abnormalities involving the lower anterior wall and apex on echocardiography or left ventriculography, and limited myocardial enzyme release without evidence for hemodynamically significant coronary arterial stenoses by angiography. We describe a case of a Tako-tsubo-like left ventricular dysfunction in a 72-year-old female Italian woman.

  12. Children linking science and technology in the primary classroom

    NASA Astrophysics Data System (ADS)

    Jane, Beverley L.

    1995-06-01

    This research project exemplifies how technology can facilitate scientific investigations. It also highlights how enthusiastic children can be when they are encouraged to pose their own questions and take responsibility for finding the answers. Year 5 children, working in groups, were involved in designing, making and appraising catchers and enclosures used to investigate small animals found within their school's grounds. A videotape of this project was made and should be a valuable resource for the professional development of both trainee and practising teachers. Included in the tape are children's spontaneous comments, their concern for animal welfare, and reflection on the various aspects of their investigations.

  13. Momentum transfer in the reactions of 13. 6-GeV/nucleon sup 16 O with copper

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cumming, J.B.; Chu, Y.Y.; Haustein, P.E.

    1992-11-01

    Mean ranges and forward-to-backward ratios have been determined by the thick-target, thick-catcher technique for fragments from the interaction of 13.6-GeV/nucleon {sup 16}O with copper. Experimental data are analyzed in terms of a two-step model and results are discussed in the context of limiting fragmentation and factorization and the predictions of a simple model for momentum transfer. Momenta imparted in the initial interactions of 13.6-GeV/nucleon {sup 16}O were inferred to be {similar to}12% lower than those for fragmentation of Cu by high-energy protons.

  14. High temperature ion source for an on-line isotope separator

    DOEpatents

    Mlekodaj, Ronald L.

    1979-01-01

    A reduced size ion source for on-line use with a cyclotron heavy-ion beam is provided. A sixfold reduction in source volume while operating with similar input power levels results in a 2000.degree. C. operating temperature. A combined target/window normally provides the reaction products for ionization while isolating the ion source plasma from the cyclotron beam line vacuum. A graphite felt catcher stops the recoiling reaction products and releases them into the plasma through diffusion and evaporation. Other target arrangements are also possible. A twenty-four hour lifetime of unattended operation is achieved, and a wider range of elements can be studied than was heretofore possible.

  15. Oil/gas separator for installation at burning wells

    DOEpatents

    Alonso, C.T.; Bender, D.A.; Bowman, B.R.; Burnham, A.K.; Chesnut, D.A.; Comfort, W.J. III; Guymon, L.G.; Henning, C.D.; Pedersen, K.B.; Sefcik, J.A.; Smith, J.A.; Strauch, M.S.

    1993-03-09

    An oil/gas separator is disclosed that can be utilized to return the burning wells in Kuwait to production. Advantageously, a crane is used to install the separator at a safe distance from the well. The gas from the well is burned off at the site, and the oil is immediately pumped into Kuwait's oil gathering system. Diverters inside the separator prevent the oil jet coming out of the well from reaching the top vents where the gas is burned. The oil falls back down, and is pumped from an annular oil catcher at the bottom of the separator, or from the concrete cellar surrounding the well.

  16. Oil/gas separator for installation at burning wells

    DOEpatents

    Alonso, Carol T.; Bender, Donald A.; Bowman, Barry R.; Burnham, Alan K.; Chesnut, Dwayne A.; Comfort, III, William J.; Guymon, Lloyd G.; Henning, Carl D.; Pedersen, Knud B.; Sefcik, Joseph A.; Smith, Joseph A.; Strauch, Mark S.

    1993-01-01

    An oil/gas separator is disclosed that can be utilized to return the burning wells in Kuwait to production. Advantageously, a crane is used to install the separator at a safe distance from the well. The gas from the well is burned off at the site, and the oil is immediately pumped into Kuwait's oil gathering system. Diverters inside the separator prevent the oil jet coming out of the well from reaching the top vents where the gas is burned. The oil falls back down, and is pumped from an annular oil catcher at the bottom of the separator, or from the concrete cellar surrounding the well.

  17. Quality Control Studies of Wavelength Shifting Fibers for a Scintillator-Based Tail Catcher Muon Tracker for Linear Collider Prototype Detector

    NASA Astrophysics Data System (ADS)

    Dyshkant, A.; Beznosko, D.; Blazey, G.; Fisk, E.; Hahn, E.; Rykalin, V.; Wayne, M.; Zutshi, V.

    2006-12-01

    Detailed measurements of the wavelength shifting fiber response to a stable and reliable light source are presented. Particulars about materials, a double reference method, and measurement technique are included. The fibers studied were several hundred Kuraray, Y-11, multiclad, 1.2-mm outer diameter wavelength shifting fibers, each cut from a reel to about one meter length. The fibers were polished, mirrored, and the mirrors were UV epoxy protected. Each fiber passed quality control requirements before installation. About 94% of the fibers tested have a response within 1% of the overall mean

  18. The Relationships among Students' Commitment, Self-Esteem, Organisational Citizenship Behaviour and Academic Performance

    ERIC Educational Resources Information Center

    Khaola, Peter P.

    2014-01-01

    As one of the most important dependent variables in education and work research, performance has been operationalised either as the proficiency with which core tasks are performed (task performance), or as extra-role behaviours that support core activities (organisational citizenship behaviours). Relative to academic performance (core academic…

  19. Implementation of kernels on the Maestro processor

    NASA Astrophysics Data System (ADS)

    Suh, Jinwoo; Kang, D. I. D.; Crago, S. P.

    Currently, most microprocessors use multiple cores to increase performance while limiting power usage. Some processors use not just a few cores, but tens of cores or even 100 cores. One such many-core microprocessor is the Maestro processor, which is based on Tilera's TILE64 processor. The Maestro chip is a 49-core, general-purpose, radiation-hardened processor designed for space applications. The Maestro processor, unlike the TILE64, has a floating point unit (FPU) in each core for improved floating point performance. The Maestro processor runs at 342 MHz clock frequency. On the Maestro processor, we implemented several widely used kernels: matrix multiplication, vector add, FIR filter, and FFT. We measured and analyzed the performance of these kernels. The achieved performance was up to 5.7 GFLOPS, and the speedup compared to single tile was up to 49 using 49 tiles.

  20. Performing an allreduce operation on a plurality of compute nodes of a parallel computer

    DOEpatents

    Faraj, Ahmad [Rochester, MN

    2012-04-17

    Methods, apparatus, and products are disclosed for performing an allreduce operation on a plurality of compute nodes of a parallel computer. Each compute node includes at least two processing cores. Each processing core has contribution data for the allreduce operation. Performing an allreduce operation on a plurality of compute nodes of a parallel computer includes: establishing one or more logical rings among the compute nodes, each logical ring including at least one processing core from each compute node; performing, for each logical ring, a global allreduce operation using the contribution data for the processing cores included in that logical ring, yielding a global allreduce result for each processing core included in that logical ring; and performing, for each compute node, a local allreduce operation using the global allreduce results for each processing core on that compute node.

  1. Performance of several low-cost accelerometers

    USGS Publications Warehouse

    Evans, J.R.; Allen, R.M.; Chung, A. I.; Cochran, E.S.; Guy, R.; Hellweg, M.; Lawrence, J. F.

    2014-01-01

    Several groups are implementing low‐cost host‐operated systems of strong‐motion accelerographs to support the somewhat divergent needs of seismologists and earthquake engineers. The Advanced National Seismic System Technical Implementation Committee (ANSS TIC, 2002), managed by the U.S. Geological Survey (USGS) in cooperation with other network operators, is exploring the efficacy of such systems if used in ANSS networks. To this end, ANSS convened a working group to explore available Class C strong‐motion accelerometers (defined later), and to consider operational and quality control issues, and the means of annotating, storing, and using such data in ANSS networks. The working group members are largely coincident with our author list, and this report informs instrument‐performance matters in the working group’s report to ANSS. Present examples of operational networks of such devices are the Community Seismic Network (CSN; csn.caltech.edu), operated by the California Institute of Technology, and Quake‐Catcher Network (QCN; Cochran et al., 2009; qcn.stanford.edu; November 2013), jointly operated by Stanford University and the USGS. Several similar efforts are in development at other institutions. The overarching goals of such efforts are to add spatial density to existing Class‐A and Class‐B (see next paragraph) networks at low cost, and to include many additional people so they become invested in the issues of earthquakes, their measurement, and the damage they cause.

  2. An evaluation of MPI message rate on hybrid-core processors

    DOE PAGES

    Barrett, Brian W.; Brightwell, Ron; Grant, Ryan; ...

    2014-11-01

    Power and energy concerns are motivating chip manufacturers to consider future hybrid-core processor designs that may combine a small number of traditional cores optimized for single-thread performance with a large number of simpler cores optimized for throughput performance. This trend is likely to impact the way in which compute resources for network protocol processing functions are allocated and managed. In particular, the performance of MPI match processing is critical to achieving high message throughput. In this paper, we analyze the ability of simple and more complex cores to perform MPI matching operations for various scenarios in order to gain insightmore » into how MPI implementations for future hybrid-core processors should be designed.« less

  3. Multi-Core Processor Memory Contention Benchmark Analysis Case Study

    NASA Technical Reports Server (NTRS)

    Simon, Tyler; McGalliard, James

    2009-01-01

    Multi-core processors dominate current mainframe, server, and high performance computing (HPC) systems. This paper provides synthetic kernel and natural benchmark results from an HPC system at the NASA Goddard Space Flight Center that illustrate the performance impacts of multi-core (dual- and quad-core) vs. single core processor systems. Analysis of processor design, application source code, and synthetic and natural test results all indicate that multi-core processors can suffer from significant memory subsystem contention compared to similar single-core processors.

  4. 20 CFR 641.700 - What performance measures/indicators apply to SCSEP grantees?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... performance. There are currently eight performance measures, of which six are core indicators and two are additional indicators. Core indicators (defined in § 641.710) are subject to goal-setting and corrective action (described in § 641.720); that is, performance level goals for each core indicator must be agreed...

  5. Performing an allreduce operation on a plurality of compute nodes of a parallel computer

    DOEpatents

    Faraj, Ahmad

    2013-07-09

    Methods, apparatus, and products are disclosed for performing an allreduce operation on a plurality of compute nodes of a parallel computer, each node including at least two processing cores, that include: establishing, for each node, a plurality of logical rings, each ring including a different set of at least one core on that node, each ring including the cores on at least two of the nodes; iteratively for each node: assigning each core of that node to one of the rings established for that node to which the core has not previously been assigned, and performing, for each ring for that node, a global allreduce operation using contribution data for the cores assigned to that ring or any global allreduce results from previous global allreduce operations, yielding current global allreduce results for each core; and performing, for each node, a local allreduce operation using the global allreduce results.

  6. 20 CFR 641.720 - How will the Department and grantees initially determine and then adjust expected levels of...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... initially determine and then adjust expected levels of performance for the core performance measures? 641... the core performance measures? (a) Initial agreement. Before the beginning of each Program Year, the Department and each grantee will undertake to agree upon expected levels of performance for each core...

  7. 20 CFR 641.720 - How will the Department and grantees initially determine and then adjust expected levels of...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... initially determine and then adjust expected levels of performance for the core performance measures? 641... the core performance measures? (a) Initial agreement. Before the beginning of each Program Year, the Department and each grantee will undertake to agree upon expected levels of performance for each core...

  8. Perkins Core Performance Measures: Results and Targets, 1999-2000.

    ERIC Educational Resources Information Center

    McHewitt, Earl R.; Taylor, Garry

    This document describes the Virginia Community College System (VCCS) Core Indicators for the Perkins III Core Performance Standards and Measures. Core indicators and measures include: (1) student attainment, measured by academic and technical skills; (2) completion, measured by graduation rate; (3) placement and persistence, measured by placement,…

  9. Wanderings of the 'Simply Perfect' Burnham Telescope

    NASA Astrophysics Data System (ADS)

    Lattis, James

    2017-08-01

    S.W. Burnham's 6-inch Clark refractor, in service from 1870, quickly became famous as a potent double star catcher. It was the instrument he used for the site survey of Lick Observatory in 1879. Sold to Washburn Observatory, it travelled to Caroline Island with Edward Holden to search for Vulcan during the total solar eclipse of May 1883. Back in Madison, it was used by George Comstock for his measurements of refraction and aberration. In the late 1950s it was used at the Knuijt Observatory in Appleton, Wisconsin. Travels and transformations of this famous telescope have spread its parts widely as astronomical relics, and it even remains in active service today.

  10. SNS STRIPPER FOIL FAILURE MODES AND THEIR CURES

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Galambos, John D; Luck, Chris; Plum, Michael A

    2010-01-01

    The diamond stripper foils in use at the Spallation Neutron Source worked successfully with no failures until May 3, 2009, when we started experiencing a rash of foil system failures after increasing the beam power to ~840 kW. The main contributors to the failures are thought to be 1) convoy electrons, stripped from the incoming H beam, that strike the foil bracket and may also reflect back from the electron catcher, and 2) vacuum breakdown from the charge developed on the foil by secondary electron emission. In this paper we will detail these and other failure mechanisms, and describe themore » improvements we have made to mitigate them.« less

  11. Metrics for Success: Strategies for Enabling Core Facility Performance and Assessing Outcomes

    PubMed Central

    Hockberger, Philip E.; Meyn, Susan M.; Nicklin, Connie; Tabarini, Diane; Auger, Julie A.

    2016-01-01

    Core Facilities are key elements in the research portfolio of academic and private research institutions. Administrators overseeing core facilities (core administrators) require assessment tools for evaluating the need and effectiveness of these facilities at their institutions. This article discusses ways to promote best practices in core facilities as well as ways to evaluate their performance across 8 of the following categories: general management, research and technical staff, financial management, customer base and satisfaction, resource management, communications, institutional impact, and strategic planning. For each category, we provide lessons learned that we believe contribute to the effective and efficient overall management of core facilities. If done well, we believe that encouraging best practices and evaluating performance in core facilities will demonstrate and reinforce the importance of core facilities in the research and educational mission of institutions. It will also increase job satisfaction of those working in core facilities and improve the likelihood of sustainability of both facilities and personnel. PMID:26848284

  12. Metrics for Success: Strategies for Enabling Core Facility Performance and Assessing Outcomes.

    PubMed

    Turpen, Paula B; Hockberger, Philip E; Meyn, Susan M; Nicklin, Connie; Tabarini, Diane; Auger, Julie A

    2016-04-01

    Core Facilities are key elements in the research portfolio of academic and private research institutions. Administrators overseeing core facilities (core administrators) require assessment tools for evaluating the need and effectiveness of these facilities at their institutions. This article discusses ways to promote best practices in core facilities as well as ways to evaluate their performance across 8 of the following categories: general management, research and technical staff, financial management, customer base and satisfaction, resource management, communications, institutional impact, and strategic planning. For each category, we provide lessons learned that we believe contribute to the effective and efficient overall management of core facilities. If done well, we believe that encouraging best practices and evaluating performance in core facilities will demonstrate and reinforce the importance of core facilities in the research and educational mission of institutions. It will also increase job satisfaction of those working in core facilities and improve the likelihood of sustainability of both facilities and personnel.

  13. Perkins Core Performance Measures Results and Targets, 2000-2001.

    ERIC Educational Resources Information Center

    McHewitt, Earl R.; Taylor, Garry

    This is a report on 2000-2001 Perkins III core performance standards and measures for the Virginia Community College System (VCCS). Perkins performance measure definitions for the system were finalized with the Virginia and federal departments of education in fall 2000. Core indicators include: (1) student attainment, which measures academic and…

  14. Space Station Furnace Facility. Volume 2: Appendix 1: Contract End Item specification (CEI), part 1

    NASA Technical Reports Server (NTRS)

    Seabrook, Craig

    1992-01-01

    This specification establishes the performance, design, development, and verification requirements for the Space Station Furnace Facility (SSFF) Core. The definition of the SSFF Core and its interfaces, specifies requirements for the SSFF Core performance, specifies requirements for the SSFF Core design, and construction are presented, and the verification requirements are established.

  15. 34 CFR 403.201 - What are the State's responsibilities for developing and implementing a statewide system of core...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and implementing a statewide system of core standards and measures of performance? 403.201 Section 403... a statewide system of core standards and measures of performance? (a)(1) Each State board receiving funds under the Act shall develop and implement a statewide system of core standards and measures of...

  16. Developing a theory of the strategic core of teams: a role composition model of team performance.

    PubMed

    Humphrey, Stephen E; Morgeson, Frederick P; Mannor, Michael J

    2009-01-01

    Although numerous models of team performance have been articulated over the past 20 years, these models have primarily focused on the individual attribute approach to team composition. The authors utilized a role composition approach, which investigates how the characteristics of a set of role holders impact team effectiveness, to develop a theory of the strategic core of teams. Their theory suggests that certain team roles are most important for team performance and that the characteristics of the role holders in the "core" of the team are more important for overall team performance. This theory was tested in 778 teams drawn from 29 years of major league baseball (1974'-2002). Results demonstrate that although high levels of experience and job-related skill are important predictors of team performance, the relationships between these constructs and team performance are significantly stronger when the characteristics are possessed by core role holders (as opposed to non-core role holders). Further, teams that invest more of their financial resources in these core roles are able to leverage such investments into significantly improved performance. These results have implications for team composition models, as they suggest a new method for considering individual contributions to a team's success that shifts the focus onto core roles. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

  17. 20 CFR 641.730 - How will the Department assist grantees in the transition to the new core performance indicators?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How will the Department assist grantees in the transition to the new core performance indicators? 641.730 Section 641.730 Employees' Benefits... transition to the new core performance indicators? (a) General transition provision. As soon as practicable...

  18. 20 CFR 641.730 - How will the Department assist grantees in the transition to the new core performance indicators?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... the transition to the new core performance indicators? 641.730 Section 641.730 Employees' Benefits... transition to the new core performance indicators? (a) General transition provision. As soon as practicable...-need indicator so that the grantees and the Department may collect sufficient data to set a meaningful...

  19. Performing an allreduce operation using shared memory

    DOEpatents

    Archer, Charles J [Rochester, MN; Dozsa, Gabor [Ardsley, NY; Ratterman, Joseph D [Rochester, MN; Smith, Brian E [Rochester, MN

    2012-04-17

    Methods, apparatus, and products are disclosed for performing an allreduce operation using shared memory that include: receiving, by at least one of a plurality of processing cores on a compute node, an instruction to perform an allreduce operation; establishing, by the core that received the instruction, a job status object for specifying a plurality of shared memory allreduce work units, the plurality of shared memory allreduce work units together performing the allreduce operation on the compute node; determining, by an available core on the compute node, a next shared memory allreduce work unit in the job status object; and performing, by that available core on the compute node, that next shared memory allreduce work unit.

  20. Performing an allreduce operation using shared memory

    DOEpatents

    Archer, Charles J; Dozsa, Gabor; Ratterman, Joseph D; Smith, Brian E

    2014-06-10

    Methods, apparatus, and products are disclosed for performing an allreduce operation using shared memory that include: receiving, by at least one of a plurality of processing cores on a compute node, an instruction to perform an allreduce operation; establishing, by the core that received the instruction, a job status object for specifying a plurality of shared memory allreduce work units, the plurality of shared memory allreduce work units together performing the allreduce operation on the compute node; determining, by an available core on the compute node, a next shared memory allreduce work unit in the job status object; and performing, by that available core on the compute node, that next shared memory allreduce work unit.

  1. Determinants of performance of supplemental immunization activities for polio eradication in Uttar Pradesh, India: social mobilization activities of the Social mobilization Network (SM Net) and Core Group Polio Project (CGPP)

    PubMed Central

    2013-01-01

    Background The primary strategy to interrupt transmission of wild poliovirus in India is to improve supplemental immunization activities (SIAs) and routine immunization coverage in priority districts. The CORE Group, part of the Social Mobilization Network (SM Net), has been successful in improving SIA coverage in high-risk areas of Uttar Pradesh (UP). The SM Net works through community level mobilisers (from the CORE Group and UNICEF) and covers more than 2 million children under the age of five. In this paper, we examine the reasons the CORE Group had been successful through exploration of which social mobilization activities of the CORE Group predicted better performance of SIAs. Methods We carried out a secondary data analysis of routine monitoring information collected by the CORE Group and the Government of India for SIAs. These data included information about vaccination outcomes of SIAs in CORE Group areas and non-CORE Group areas within the districts where the CORE Group operates, along with information about the number of various social mobilization activities carried out for each SIA. We employed Generalized Linear Latent and Mixed Model (GLLAMM) statistical analysis methods to identify which social mobilization activities predicted SIA performance, and to account for the intra-class correlation (ICC) between multiple observations within the same geographic areas over time. Results The number of mosque announcements carried out was the most consistent determinant of improved SIA performance across various performance measures. The number of Bullawa Tollies carried out also appeared to be an important determinant of improved SIA performance. The number of times other social mobilization activities were carried out did not appear to determine better SIA performance. Conclusions Social mobilization activities can improve the performance of mass vaccination campaigns. In the CORE Group areas, the number of mosque announcements and Bullawa Tollies carried out were important determinants of desired SIA outcomes. The CORE Group and SM Net should conduct sufficient numbers of these activities in support of each SIA. It is likely, however, that the quality of social mobilization activities (not studied here) is as or more important than the quantity of activities; quality measures of social mobilization activities should be investigated in the future as to how they determine vaccination performance. PMID:23327427

  2. High skin temperature and hypohydration impair aerobic performance.

    PubMed

    Sawka, Michael N; Cheuvront, Samuel N; Kenefick, Robert W

    2012-03-01

    This paper reviews the roles of hot skin (>35°C) and body water deficits (>2% body mass; hypohydration) in impairing submaximal aerobic performance. Hot skin is associated with high skin blood flow requirements and hypohydration is associated with reduced cardiac filling, both of which act to reduce aerobic reserve. In euhydrated subjects, hot skin alone (with a modest core temperature elevation) impairs submaximal aerobic performance. Conversely, aerobic performance is sustained with core temperatures >40°C if skin temperatures are cool-warm when euhydrated. No study has demonstrated that high core temperature (∼40°C) alone, without coexisting hot skin, will impair aerobic performance. In hypohydrated subjects, aerobic performance begins to be impaired when skin temperatures exceed 27°C, and even warmer skin exacerbates the aerobic performance impairment (-1.5% for each 1°C skin temperature). We conclude that hot skin (high skin blood flow requirements from narrow skin temperature to core temperature gradients), not high core temperature, is the 'primary' factor impairing aerobic exercise performance when euhydrated and that hypohydration exacerbates this effect.

  3. The effect of short-term isometric training on core/torso stiffness.

    PubMed

    Lee, Benjamin; McGill, Stuart

    2017-09-01

    "Core" exercise is a basic part of many physical training regimens with goals ranging from rehabilitation of spine and knee injuries to improving athletic performance. Core stiffness has been proposed to perform several functions including reducing pain by minimising joint micro-movements, and enhancing strength and speed performance. This study probes the links between a training approach and immediate but temporary changes in stiffness. Passive and active stiffness was measured on 24 participants; 12 having little to no experience in core training (inexperienced), and the other 12 being athletes experienced to core training methods; before and after a 15 min bout of isometric core exercises. Passive stiffness was assessed on a "frictionless" bending apparatus and active stiffness assessed via a quick release mechanism. Short-term isometric core training increased passive and active stiffness in most directions for both inexperienced and experienced participants, passive left lateral bend among experienced participants being the exception (P < 0.05). There was no difference between the inexperienced and experienced groups. The results confirm that the specific isometric training exercise approach tested here can induce immediate changes in core stiffness, in this case following a single session. This may influence performance and injury resilience for a brief period.

  4. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baek, M. H.; Kim, S. J.; Yoo, J.

    The major roles of a prototype SFR are to provide irradiation test capability for the fuel and structure materials, and to obtain operational experiences of systems. Due to a compromise between the irradiation capability and construction costs, the power level should be properly determined. In this paper, a trade-off study on the power level of the prototype SFR was performed from a neutronics viewpoint. To select candidate cores, the parametric study of pin diameters was estimated using 20 wt.% uranium fuel. The candidate cores of different power levels, 125 MWt, 250 MWt, 400 MWt, and 500 MWt, were compared withmore » the 1500 MWt reference core. The resulting core performance and economic efficiency indices became insensitive to the power at about 400-500 MWt and sharply deteriorated at about 125-250 MWt with decreasing core sizes. Fuel management scheme, TRU core performance comparing with uranium core, and sodium void reactivity were also evaluated with increasing power levels. It is found that increasing the number of batches showed higher burnup performance and economic efficiency. However, increasing the cycle length showed the trends in lower economic efficiency. Irradiation performance of TRU and enriched TRU cores was improved about 20 % and 50 %, respectively. The maximum sodium void reactivity of 5.2$ was confirmed less than the design limit of 7.5$. As a result, the power capacity of the prototype SFR should not be less than 250 MWt and would be appropriate at {approx} 500 MWt considering the performance and economic efficiency. (authors)« less

  5. Mid-humerus adaptation in fast pitch softballers and the impact of throwing mechanics

    PubMed Central

    Bogenschutz, Elizabeth D.; Smith, Heather D.; Warden, Stuart J.

    2011-01-01

    Purpose Throwing is a vigorous activity that generates large internal loads. There is limited evidence of the effect of these loads on bone adaptation. The aim of this study was to investigate the: 1) magnitude of bone adaptation within the midshaft humerus of female fast-pitch softball players and 2) influence of throwing mechanics (windmill vs. overhand throwing) on the magnitude of adaptation. Methods Midshaft humeral bone mass, structure and estimated strength were assessed via peripheral quantitative computed tomography in fast-pitch softball players (throwers; n=15) and matched controls (controls; n=15). The effect of throwing was examined by comparing dominant-to-nondominant differences in throwers to controls, while the influence of mechanics was determined by comparing dominant-to-nondominant differences in throwers who primarily play as pitcher (windmill thrower), catcher (overhand thrower) or fielder (overhand thrower). Results Throwers had greater dominant-to-nondominant difference in midshaft humeral bone mass, structure and estimated strength relative to controls (all P<0.05). The largest effect was for estimated torsional strength with throwers having a mean dominant-to-nondominant difference of 22.5% (range, 6.7% to 43.9%) compared to 4.4% (range, -8.3% to 17.5%) in controls (P<0.001). Throwing mechanics appeared to influence the magnitude of skeletal adaptation, with overhand throwers having more than double dominant-to-nondominant difference in midshaft humeral bone mass, structure and estimated strength than windmill throwers (all P<0.05). Conclusion Throwing induces substantial skeletal adaptation at the midshaft humerus of the dominant upper extremity. Throwing mechanics appears to the influence the magnitude of adaptation as catchers and fielders (overhand throwers) had twice as much adaptation as pitchers (windmill throwers). The latter finding may have implications for skeletal injury risk at the midshaft humerus in throwing athletes. PMID:21311354

  6. The Quake Catcher Network: Cyberinfrastructure Bringing Seismology into Schools and Homes

    NASA Astrophysics Data System (ADS)

    Lawrence, J. F.; Cochran, E. S.

    2007-12-01

    We propose to implement a high density, low cost strong-motion network for rapid response and early warning by placing sensors in schools, homes, and offices. The Quake Catcher Network (QCN) will employ existing networked laptops and desktops to form the world's largest high-density, distributed computing seismic network. Costs for this network will be minimal because the QCN will use 1) strong motion sensors (accelerometers) already internal to many laptops and 2) nearly identical low-cost universal serial bus (USB) accelerometers for use with desktops. The Berkeley Open Infrastructure for Network Computing (BOINC!) provides a free, proven paradigm for involving the public in large-scale computational research projects. As evidenced by the SETI@home program and others, individuals are especially willing to donate their unused computing power to projects that they deem relevant, worthwhile, and educational. The client- and server-side software will rapidly monitor incoming seismic signals, detect the magnitudes and locations of significant earthquakes, and may even provide early warnings to other computers and users before they can feel the earthquake. The software will provide the client-user with a screen-saver displaying seismic data recorded on their laptop, recently detected earthquakes, and general information about earthquakes and the geosciences. Furthermore, this project will install USB sensors in K-12 classrooms as an educational tool for teaching science. Through a variety of interactive experiments students will learn about earthquakes and the hazards earthquakes pose. For example, students can learn how the vibrations of an earthquake decrease with distance by jumping up and down at increasing distances from the sensor and plotting the decreased amplitude of the seismic signal measured on their computer. We hope to include an audio component so that students can hear and better understand the difference between low and high frequency seismic signals. The QCN will provide a natural way to engage students and the public in earthquake detection and research.

  7. Multi-core processing and scheduling performance in CMS

    NASA Astrophysics Data System (ADS)

    Hernández, J. M.; Evans, D.; Foulkes, S.

    2012-12-01

    Commodity hardware is going many-core. We might soon not be able to satisfy the job memory needs per core in the current single-core processing model in High Energy Physics. In addition, an ever increasing number of independent and incoherent jobs running on the same physical hardware not sharing resources might significantly affect processing performance. It will be essential to effectively utilize the multi-core architecture. CMS has incorporated support for multi-core processing in the event processing framework and the workload management system. Multi-core processing jobs share common data in memory, such us the code libraries, detector geometry and conditions data, resulting in a much lower memory usage than standard single-core independent jobs. Exploiting this new processing model requires a new model in computing resource allocation, departing from the standard single-core allocation for a job. The experiment job management system needs to have control over a larger quantum of resource since multi-core aware jobs require the scheduling of multiples cores simultaneously. CMS is exploring the approach of using whole nodes as unit in the workload management system where all cores of a node are allocated to a multi-core job. Whole-node scheduling allows for optimization of the data/workflow management (e.g. I/O caching, local merging) but efficient utilization of all scheduled cores is challenging. Dedicated whole-node queues have been setup at all Tier-1 centers for exploring multi-core processing workflows in CMS. We present the evaluation of the performance scheduling and executing multi-core workflows in whole-node queues compared to the standard single-core processing workflows.

  8. DANCE, BALANCE AND CORE MUSCLE PERFORMANCE MEASURES ARE IMPROVED FOLLOWING A 9-WEEK CORE STABILIZATION TRAINING PROGRAM AMONG COMPETITIVE COLLEGIATE Dancers.

    PubMed

    Watson, Todd; Graning, Jessica; McPherson, Sue; Carter, Elizabeth; Edwards, Joshuah; Melcher, Isaac; Burgess, Taylor

    2017-02-01

    Dance performance requires not only lower extremity muscle strength and endurance, but also sufficient core stabilization during dynamic dance movements. While previous studies have identified a link between core muscle performance and lower extremity injury risk, what has not been determined is if an extended core stabilization training program will improve specific measures of dance performance. This study examined the impact of a nine-week core stabilization program on indices of dance performance, balance measures, and core muscle performance in competitive collegiate dancers. Within-subject repeated measures design. A convenience sample of 24 female collegiate dance team members (age = 19.7 ± 1.1 years, height = 164.3 ± 5.3 cm, weight 60.3 ± 6.2 kg, BMI = 22.5 ± 3.0) participated. The intervention consisted of a supervised and non-supervised core (trunk musculature) exercise training program designed specifically for dance team participants performed three days/week for nine weeks in addition to routine dance practice. Prior to the program implementation and following initial testing, transversus abdominis (TrA) activation training was completed using the abdominal draw-in maneuver (ADIM) including ultrasound imaging (USI) verification and instructor feedback. Paired t tests were conducted regarding the nine-week core stabilization program on dance performance and balance measures (pirouettes, single leg balance in passe' releve position, and star excursion balance test [SEBT]) and on tests of muscle performance. A repeated measures (RM) ANOVA examined four TrA instruction conditions of activation: resting baseline, self-selected activation, immediately following ADIM training and four days after completion of the core stabilization training program. Alpha was set at 0.05 for all analysis. Statistically significant improvements were seen on single leg balance in passe' releve and bilateral anterior reach for the SEBT (both p ≤ 0.01), number of pirouettes (p = 0.011), and all measures of strength (p ≤ 0.05) except single leg heel raise. The RM ANOVA on mean percentage of change in TrA was significant; post hoc paired t tests demonstrated significant improvements in dancers' TrA activations across the four instruction conditions. This core stabilization training program improves pirouette ability, balance (static and dynamic), and measures of muscle performance. Additionally, ADIM training resulted in immediate and short-term (nine-week) improvements in TrA activation in a functional dance position. 2b.

  9. DANCE, BALANCE AND CORE MUSCLE PERFORMANCE MEASURES ARE IMPROVED FOLLOWING A 9-WEEK CORE STABILIZATION TRAINING PROGRAM AMONG COMPETITIVE COLLEGIATE Dancers

    PubMed Central

    Graning, Jessica; McPherson, Sue; Carter, Elizabeth; Edwards, Joshuah; Melcher, Isaac; Burgess, Taylor

    2017-01-01

    Background Dance performance requires not only lower extremity muscle strength and endurance, but also sufficient core stabilization during dynamic dance movements. While previous studies have identified a link between core muscle performance and lower extremity injury risk, what has not been determined is if an extended core stabilization training program will improve specific measures of dance performance. Hypothesis/Purpose This study examined the impact of a nine-week core stabilization program on indices of dance performance, balance measures, and core muscle performance in competitive collegiate dancers. Study Design Within-subject repeated measures design. Methods A convenience sample of 24 female collegiate dance team members (age = 19.7 ± 1.1 years, height = 164.3 ± 5.3 cm, weight 60.3 ± 6.2 kg, BMI = 22.5 ± 3.0) participated. The intervention consisted of a supervised and non-supervised core (trunk musculature) exercise training program designed specifically for dance team participants performed three days/week for nine weeks in addition to routine dance practice. Prior to the program implementation and following initial testing, transversus abdominis (TrA) activation training was completed using the abdominal draw-in maneuver (ADIM) including ultrasound imaging (USI) verification and instructor feedback. Paired t tests were conducted regarding the nine-week core stabilization program on dance performance and balance measures (pirouettes, single leg balance in passe’ releve position, and star excursion balance test [SEBT]) and on tests of muscle performance. A repeated measures (RM) ANOVA examined four TrA instruction conditions of activation: resting baseline, self-selected activation, immediately following ADIM training and four days after completion of the core stabilization training program. Alpha was set at 0.05 for all analysis. Results Statistically significant improvements were seen on single leg balance in passe’ releve and bilateral anterior reach for the SEBT (both p ≤ 0.01), number of pirouettes (p = 0.011), and all measures of strength (p ≤ 0.05) except single leg heel raise. The RM ANOVA on mean percentage of change in TrA was significant; post hoc paired t tests demonstrated significant improvements in dancers’ TrA activations across the four instruction conditions Conclusion This core stabilization training program improves pirouette ability, balance (static and dynamic), and measures of muscle performance. Additionally, ADIM training resulted in immediate and short-term (nine-week) improvements in TrA activation in a functional dance position. Level of Evidence 2b PMID:28217414

  10. Investing the effectiveness of retention performance in a non-volatile floating gate memory device with a core-shell structure of CdSe nanoparticles

    NASA Astrophysics Data System (ADS)

    Lee, Dong-Hoon; Kim, Jung-Min; Lim, Ki-Tae; Cho, Hyeong Jun; Bang, Jin Ho; Kim, Yong-Sang

    2016-03-01

    In this paper, we empirically investigate the retention performance of organic non-volatile floating gate memory devices with CdSe nanoparticles (NPs) as charge trapping elements. Core-structured CdSe NPs or core-shell-structured ZnS/CdSe NPs were mixed in PMMA and their performance in pentacene based device was compared. The NPs and self-organized thin tunneling PMMA inside the devices exhibited hysteresis by trapping hole during capacitance-voltage characterization. Despite of core-structured NPs showing a larger memory window, the retention time was too short to be adopted by an industry. By contrast core-shell structured NPs showed an improved retention time of >10000 seconds than core-structure NCs. Based on these results and the energy band structure, we propose the retention mechanism of each NPs. This investigation of retention performance provides a comparative and systematic study of the charging/discharging behaviors of NPs based memory devices. [Figure not available: see fulltext.

  11. Tests of a D vented thrust deflecting nozzle behind a simulated turbofan engine

    NASA Technical Reports Server (NTRS)

    Watson, T. L.

    1982-01-01

    A D vented thrust deflecting nozzle applicable to subsonic V/STOL aircraft was tested behind a simulated turbofan engine in the verticle thrust stand. Nozzle thrust, fan operating characteristics, nozzle entrance conditions, and static pressures were measured. Nozzle performance was measured for variations in exit area and thrust deflection angle. Six core nozzle configurations, the effect of core exit axial location, mismatched core and fan stream nozzle pressure ratios, and yaw vane presence were evaluated. Core nozzle configuration affected performance at normal and engine out operating conditions. Highest vectored nozzle performance resulted for a given exit area when core and fan stream pressure were equal. Its is concluded that high nozzle performance can be maintained at both normal and engine out conditions through control of the nozzle entrance Mach number with a variable exit area.

  12. CF6 jet engine performance improvement program. Short core exhaust nozzle performance improvement concept. [specific fuel consumption reduction

    NASA Technical Reports Server (NTRS)

    Fasching, W. A.

    1979-01-01

    The short core exhaust nozzle was evaluated in CF6-50 engine ground tests including performance, acoustic, and endurance tests. The test results verified the performance predictions from scale model tests. The short core exhaust nozzle provides an internal cruise sfc reduction of 0.9 percent without an increase in engine noise. The nozzle hardware successfully completed 1000 flight cycles of endurance testing without any signs of distress.

  13. Adaptive control method for core power control in TRIGA Mark II reactor

    NASA Astrophysics Data System (ADS)

    Sabri Minhat, Mohd; Selamat, Hazlina; Subha, Nurul Adilla Mohd

    2018-01-01

    The 1MWth Reactor TRIGA PUSPATI (RTP) Mark II type has undergone more than 35 years of operation. The existing core power control uses feedback control algorithm (FCA). It is challenging to keep the core power stable at the desired value within acceptable error bands to meet the safety demand of RTP due to the sensitivity of nuclear research reactor operation. Currently, the system is not satisfied with power tracking performance and can be improved. Therefore, a new design core power control is very important to improve the current performance in tracking and regulate reactor power by control the movement of control rods. In this paper, the adaptive controller and focus on Model Reference Adaptive Control (MRAC) and Self-Tuning Control (STC) were applied to the control of the core power. The model for core power control was based on mathematical models of the reactor core, adaptive controller model, and control rods selection programming. The mathematical models of the reactor core were based on point kinetics model, thermal hydraulic models, and reactivity models. The adaptive control model was presented using Lyapunov method to ensure stable close loop system and STC Generalised Minimum Variance (GMV) Controller was not necessary to know the exact plant transfer function in designing the core power control. The performance between proposed adaptive control and FCA will be compared via computer simulation and analysed the simulation results manifest the effectiveness and the good performance of the proposed control method for core power control.

  14. Multi-core processing and scheduling performance in CMS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hernandez, J. M.; Evans, D.; Foulkes, S.

    2012-01-01

    Commodity hardware is going many-core. We might soon not be able to satisfy the job memory needs per core in the current single-core processing model in High Energy Physics. In addition, an ever increasing number of independent and incoherent jobs running on the same physical hardware not sharing resources might significantly affect processing performance. It will be essential to effectively utilize the multi-core architecture. CMS has incorporated support for multi-core processing in the event processing framework and the workload management system. Multi-core processing jobs share common data in memory, such us the code libraries, detector geometry and conditions data, resultingmore » in a much lower memory usage than standard single-core independent jobs. Exploiting this new processing model requires a new model in computing resource allocation, departing from the standard single-core allocation for a job. The experiment job management system needs to have control over a larger quantum of resource since multi-core aware jobs require the scheduling of multiples cores simultaneously. CMS is exploring the approach of using whole nodes as unit in the workload management system where all cores of a node are allocated to a multi-core job. Whole-node scheduling allows for optimization of the data/workflow management (e.g. I/O caching, local merging) but efficient utilization of all scheduled cores is challenging. Dedicated whole-node queues have been setup at all Tier-1 centers for exploring multi-core processing workflows in CMS. We present the evaluation of the performance scheduling and executing multi-core workflows in whole-node queues compared to the standard single-core processing workflows.« less

  15. Selective Deuteron Acceleration and Neutron Production on the Vulcan PW Laser

    NASA Astrophysics Data System (ADS)

    Krygier, A. G.; Morrison, J. T.; Freeman, R. R.; Ahmed, H.; Green, J. A.; Alejo, A.; Kar, S.; Vassura, L.

    2014-10-01

    Fast neutron sources are important for a variety of applications including radiography and the detection of sensitive materials. Here we report on the results of an experiment using the Vulcan PW laser at Rutherford Appleton Laboratory to produce a nearly pure deuterium ion beam via Target Normal Sheath Acceleration. The typical contaminants are suppressed by freezing a μ m's thick layer of heavy water vapor (D2 O) onto a cryogenic target during the shot sequence. Neutrons were generated by colliding the accelerated deuterons were into secondary targets made of deuterated plastic in the pitcher-catcher arrangement. Absolute yields for deuterium ions and neutrons are reported. This work is supported by DOE Contract DE-FC02-04ER54789.

  16. Dynamic Sonographic Visualization of an Occult Posterior Lateral Meniscocapsular Separation: A Case Report.

    PubMed

    Schroeder, Allison; Musahl, Volker; Urbanek, Christopher; Onishi, Kentaro

    2018-04-05

    Meniscocapsular separation describes detachment of the meniscus from the knee joint capsule. Diagnosis is challenging with conventional examination and imaging methods. We report a case of an 18-year-old female softball catcher with unrevealing magnetic resonance imaging despite continued left knee locking and discomfort with deep squatting. Meniscocapsular separation was revealed only on dynamic sonographic exam, where knee flexion revealed a 3.1-mm gap that developed between the capsule and peripheral meniscus. Arthroscopy confirmed the sonographic findings, and repair resulted in complete resolution of symptoms. This case highlights the utility of dynamic diagnostic sonography in a rare case of posterior lateral meniscocapsular separation. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

  17. Family incivility and job performance: a moderated mediation model of psychological distress and core self-evaluation.

    PubMed

    Lim, Sandy; Tai, Kenneth

    2014-03-01

    This study extends the stress literature by exploring the relationship between family incivility and job performance. We examine whether psychological distress mediates the link between family incivility and job performance. We also investigate how core self-evaluation might moderate this mediated relationship. Data from a 2-wave study indicate that psychological distress mediates the relationship between family incivility and job performance. In addition, core self-evaluation moderates the relationship between family incivility and psychological distress but not the relationship between psychological distress and job performance. The results hold while controlling for general job stress, family-to-work conflict, and work-to-family conflict. The findings suggest that family incivility is linked to poor performance at work, and psychological distress and core self-evaluation are key mechanisms in the relationship.

  18. MetAlign 3.0: performance enhancement by efficient use of advances in computer hardware.

    PubMed

    Lommen, Arjen; Kools, Harrie J

    2012-08-01

    A new, multi-threaded version of the GC-MS and LC-MS data processing software, metAlign, has been developed which is able to utilize multiple cores on one PC. This new version was tested using three different multi-core PCs with different operating systems. The performance of noise reduction, baseline correction and peak-picking was 8-19 fold faster compared to the previous version on a single core machine from 2008. The alignment was 5-10 fold faster. Factors influencing the performance enhancement are discussed. Our observations show that performance scales with the increase in processor core numbers we currently see in consumer PC hardware development.

  19. Core-shell microspheres with porous nanostructured shells for liquid chromatography.

    PubMed

    Ahmed, Adham; Skinley, Kevin; Herodotou, Stephanie; Zhang, Haifei

    2018-01-01

    The development of new stationary phases has been the key aspect for fast and efficient high-performance liquid chromatography separation with relatively low backpressure. Core-shell particles, with a solid core and porous shell, have been extensively investigated and commercially manufactured in the last decade. The excellent performance of core-shell particles columns has been recorded for a wide range of analytes, covering small and large molecules, neutral and ionic (acidic and basic), biomolecules and metabolites. In this review, we first introduce the advance and advantages of core-shell particles (or more widely known as superficially porous particles) against non-porous particles and fully porous particles. This is followed by the detailed description of various methods used to fabricate core-shell particles. We then discuss the applications of common silica core-shell particles (mostly commercially manufactured), spheres-on-sphere particles and core-shell particles with a non-silica shell. This review concludes with a summary and perspective on the development of stationary phase materials for high-performance liquid chromatography applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Chemical insights into the roles of nanowire cores on the growth and supercapacitor performances of Ni-Co-O/Ni(OH)2 core/shell electrodes

    PubMed Central

    Yin, Xuesong; Tang, Chunhua; Zhang, Liuyang; Yu, Zhi Gen; Gong, Hao

    2016-01-01

    Nanostructured core/shell electrodes have been experimentally demonstrated promising for high-performance electrochemical energy storage devices. However, chemical insights into the significant roles of nanowire cores on the growth of shells and their supercapacitor behaviors still remain as a research shortfall. In this work, by substituting 1/3 cobalt in the Co3O4 nanowire core with nickel, a 61% enhancement of the specific mass-loading of the Ni(OH)2 shell, a tremendous 93% increase of the volumetric capacitance and a superior cyclability were achieved in a novel NiCo2O4/Ni(OH)2 core/shell electrode in contrast to a Co3O4/Ni(OH)2 one. A comparative study suggested that not only the growth of Ni(OH)2 shells but also the contribution of cores were attributed to the overall performances. Importantly, their chemical origins were revealed through a theoretical simulation of the core/shell interfacial energy changes. Besides, asymmetric supercapacitor devices and applications were also explored. The scientific clues and practical potentials obtained in this work are helpful for the design and analysis of alternative core/shell electrode materials. PMID:26857606

  1. Chemical insights into the roles of nanowire cores on the growth and supercapacitor performances of Ni-Co-O/Ni(OH)₂ core/shell electrodes.

    PubMed

    Yin, Xuesong; Tang, Chunhua; Zhang, Liuyang; Yu, Zhi Gen; Gong, Hao

    2016-02-09

    Nanostructured core/shell electrodes have been experimentally demonstrated promising for high-performance electrochemical energy storage devices. However, chemical insights into the significant roles of nanowire cores on the growth of shells and their supercapacitor behaviors still remain as a research shortfall. In this work, by substituting 1/3 cobalt in the Co3O4 nanowire core with nickel, a 61% enhancement of the specific mass-loading of the Ni(OH)2 shell, a tremendous 93% increase of the volumetric capacitance and a superior cyclability were achieved in a novel NiCo2O4/Ni(OH)2 core/shell electrode in contrast to a Co3O4/Ni(OH)2 one. A comparative study suggested that not only the growth of Ni(OH)2 shells but also the contribution of cores were attributed to the overall performances. Importantly, their chemical origins were revealed through a theoretical simulation of the core/shell interfacial energy changes. Besides, asymmetric supercapacitor devices and applications were also explored. The scientific clues and practical potentials obtained in this work are helpful for the design and analysis of alternative core/shell electrode materials.

  2. Development of coring procedures applied to Si, CdTe, and CIGS solar panels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Moutinho, H. R.; Johnston, S.; To, B.

    Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that wemore » developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.« less

  3. Development of coring procedures applied to Si, CdTe, and CIGS solar panels

    DOE PAGES

    Moutinho, H. R.; Johnston, S.; To, B.; ...

    2018-01-04

    Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that wemore » developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.« less

  4. The Effect of Core Configuration on Thermal Barrier Thermal Performance

    NASA Technical Reports Server (NTRS)

    DeMange, Jeffrey J.; Bott, Robert H.; Druesedow, Anne S.

    2015-01-01

    Thermal barriers and seals are integral components in the thermal protection systems (TPS) of nearly all aerospace vehicles. They are used to minimize heat transfer through interfaces and gaps and protect underlying temperature-sensitive components. The core insulation has a significant impact on both the thermal and mechanical properties of compliant thermal barriers. Proper selection of an appropriate core configuration to mitigate conductive, convective and radiative heat transfer through the thermal barrier is challenging. Additionally, optimization of the thermal barrier for thermal performance may have counteracting effects on mechanical performance. Experimental evaluations have been conducted to better understand the effect of insulation density on permeability and leakage performance, which can significantly impact the resistance to convective heat transfer. The effect of core density on mechanical performance was also previously investigated and will be reviewed. Simple thermal models were also developed to determine the impact of various core parameters on downstream temperatures. An extended understanding of these factors can improve the ability to design and implement these critical TPS components.

  5. Dye sensitized solar cell (DSSC) with natural dyes extracted from Jatropha leaves and purple Chrysanthemum flowers as sensitizer

    NASA Astrophysics Data System (ADS)

    Tahir, Dahlang; Satriani, Wilda; Gareso, P. L.; Abdullah, B.

    2018-03-01

    DSSC (Dye-Sensitized Solar Cell) prototype has been investigated using Jatropha leaves and purple Chrysanthemum flowers as natural dyes. DSSC consists of working electrode and counter electrode. A working electrode composed of semiconductor nanoparticles TiO2 that has been coated with dye molecules. Dye molecules serve as light photon catchers, while semiconductor nanoparticles TiO2 function to absorb and forward photons into electrons. In the electrode counter given catalyst carbon, serves to accelerate the reaction kinetics of triiodide reduction process on transparent conductive oxide (TCO). DSSC using TiO2 as a semiconductor material and natural dyes as sensitizer from Jatropha leaves and purple Chrysanthemum flowers are successful produced. The physical properties of the working electrode have been determined by using XRD and the chemical properties of the TiO2 powder and dye powder using FTIR and dye solution using UV-Vis. The resulted fabrications are also examined its I-V characteristics. The best performance is generated by mixed dye 1.91 x 10-3 % compared than those DSSC for dye extracted from Jatropha leaves or purple Chrysanthemum. The characterization results show that the higher of the absorption wavelength of the DSSC efficiency is high.

  6. A Monte Carlo simulation to study a design of a gamma-ray detector for neutron resonance densitometry

    NASA Astrophysics Data System (ADS)

    Tsuchiya, H.; Harada, H.; Koizumi, M.; Kitatani, F.; Takamine, J.; Kureta, M.; Iimura, H.

    2013-11-01

    Neutron resonance densitometry (NRD) has been proposed to quantify nuclear materials in melted fuel (MF) that will be removed from the Fukushima Daiichi nuclear power plant. The problem is complex due to the expected presence of strong neutron absorbing impurities such as 10B and high radiation field that is mainly caused by 137Cs. To identify the impurities under the high radiation field, NRD is based on a combination of neutron resonance transmission analysis (NRTA) and neutron resonance capture analysis (NRCA). We investigated with Geant4 the performance of a gamma-ray detector for NRCA in NRD. The gamma-ray detector has a well shape, consisting of cylindrical and tube type LaBr3 scintillators. We show how it measures 478 keV gamma rays derived from 10B(n, αγ) reaction in MF under a high 137Cs-radiation environment. It was found that the gamma-ray detector was able to well suppress the Compton edge of 662-keV gamma rays of 137Cs and had a high peak-to-Compton continuum ratio, by using the tube type scintillator as a back-catcher detector. Then, we demonstrate that with this ability, detection of 478-keV gamma rays from 10B is accomplished in realistic measuring time.

  7. Photofission of 197Au and 209Bi at intermediate energies

    NASA Astrophysics Data System (ADS)

    Haba, H.; Sakamoto, K.; Igarashi, M.; Kasaoka, M.; Washiyama, K.; Matsumura, H.; Oura, Y.; Shibata, S.; Furukawa, M.; Fujiwara, I.

    2003-01-01

    Recoil properties and yields of radionuclides formed in the photofission of 197Au and 209Bi by bremsstrahlung of end-point energies ( E 0) from 300 to 1100 MeV have been investigated using the thick-target thick-catcher method. The kinetic energies T of the residual nuclei were deduced based on the two-step vector model and discussed by comparing with the reported results on protoninduced reactions as well as those on photospallation. The charge distribution was reproduced by a Gaussian function with the most probable charge Zp expressed by a linera function of the product mass number A and with the A-independent width FWHM CD. Based on the charge distribution parameters, the symmetric mass yield distribution with the most probable mass A p of 92 m.u. and the width FWHM MD of 39 m.u. was obtained for 197Au at E 0≥600 MeV. The A p value for 209Bi was larger by 4 m.u. than that for 197Au and the FWHM MD was smaller by 6 m.u. A comparison with the calculations using the Photon-induced Intranuclear Cascade Analysis 3 code combined with the Generalized Evaporation Model code (PICA3/GEM) was also performed.

  8. Performance of ARCHITECT HCV core antigen test with specimens from US plasma donors and injecting drug users.

    PubMed

    Mixson-Hayden, Tonya; Dawson, George J; Teshale, Eyasu; Le, Thao; Cheng, Kevin; Drobeniuc, Jan; Ward, John; Kamili, Saleem

    2015-05-01

    Hepatitis C virus (HCV) core antigen is a serological marker of current HCV infection. The aim of this study was mainly to evaluate the performance characteristics of the ARCHITECT HCV core antigen assay with specimens from US plasma donors and injecting drug users. A total of 551 serum and plasma samples with known anti-HCV and HCV RNA status were tested for HCV core antigen using the Abbott ARCHITECT HCV core antigen test. HCV core antigen was detectable in 100% of US plasma donor samples collected during the pre-seroconversion phase of infection (anti-HCV negative/HCV RNA positive). Overall sensitivity of the HCV core antigen assay was 88.9-94.3% in samples collected after seroconversion. The correlation between HCV core antigen and HCV RNA titers was 0.959. HCV core antigen testing may be reliably used to identify current HCV infection. Published by Elsevier B.V.

  9. Titanium dioxide@polypyrrole core-shell nanowires for all solid-state flexible supercapacitors

    NASA Astrophysics Data System (ADS)

    Yu, Minghao; Zeng, Yinxiang; Zhang, Chong; Lu, Xihong; Zeng, Chenghui; Yao, Chenzhong; Yang, Yangyi; Tong, Yexiang

    2013-10-01

    Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance.Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance. Electronic supplementary information (ESI) available: Experimental details, XRD pattern, FT-IR absorption spectrum and CV curves of TiO2@PPy NWs, and SEM images of the PPy. See DOI: 10.1039/c3nr03578f

  10. Relationships between core factors of knowledge management in hospital nursing organisations and outcomes of nursing performance.

    PubMed

    Lee, Eun Ju; Kim, Hong Soon; Kim, Hye Young

    2014-12-01

    The study was conducted to investigate the levels of implementation of knowledge management and outcomes of nursing performance, to examine the relationships between core knowledge management factors and nursing performance outcomes and to identify core knowledge management factors affecting these outcomes. Effective knowledge management is very important to achieve strong organisational performance. The success or failure of knowledge management depends on how effectively an organisation's members share and use their knowledge. Because knowledge management plays a key role in enhancing nursing performance, identifying the core factors and investigating the level of knowledge management in a given hospital are priorities to ensure a high quality of nursing for patients. The study employed a descriptive research procedure. The study sample consisted of 192 nurses registered in three large healthcare organisations in South Korea. The variables demographic characteristics, implementation of core knowledge management factors and outcomes of nursing performance were examined and analysed in this study. The relationships between the core knowledge management factors and outcomes of nursing performance as well as the factors affecting the performance outcomes were investigated. A knowledge-sharing culture and organisational learning were found to be core factors affecting nursing performance. The study results provide basic data that can be used to formulate effective knowledge management strategies for enhancing nursing performance in hospital nursing organisations. In particular, prioritising the adoption of a knowledge-sharing culture and organisational learning in knowledge management systems might be one method for organisations to more effectively manage their knowledge resources and thus to enhance the outcomes of nursing performance and achieve greater business competitiveness. The study results can contribute to the development of effective and efficient knowledge management systems and strategies for enhancing knowledge-sharing culture and organisational learning that can improve both the productivity and competitiveness of healthcare organisations. © 2014 John Wiley & Sons Ltd.

  11. Effect of core strength and endurance training on performance in college students: randomized pilot study.

    PubMed

    Schilling, Jim F; Murphy, Jeff C; Bonney, John R; Thich, Jacob L

    2013-07-01

    Core training continues to be emphasized with the proposed intent of improving athletic performance. The purpose of this investigation was to discover if core isometric endurance exercises were superior to core isotonic strengthening exercises and if either influenced specific endurance, strength, and performance measures. Ten untrained students were randomly assigned to core isometric endurance (n = 5) and core isotonic strength training (n = 5). Each performed three exercises, two times per week for six weeks. A repeated measures ANOVA was used to compare the measurements for the dependent variables and significance by bonferroni post-hoc testing. The training protocols were compared using a 2 × 3 mixed model ANOVA. Improvement in trunk flexor and extensor endurance (p < 0.05) along with squat and bench press strength (p < 0.05) occurred with the strength group. Improvement in trunk flexor and right lateral endurance (p < 0.05) along with strength in the squat (p < 0.05) were found with the endurance group. Neither training protocol claimed superiority and both were ineffective in improving performance. Published by Elsevier Ltd.

  12. Application Performance Analysis and Efficient Execution on Systems with multi-core CPUs, GPUs and MICs: A Case Study with Microscopy Image Analysis

    PubMed Central

    Teodoro, George; Kurc, Tahsin; Andrade, Guilherme; Kong, Jun; Ferreira, Renato; Saltz, Joel

    2015-01-01

    We carry out a comparative performance study of multi-core CPUs, GPUs and Intel Xeon Phi (Many Integrated Core-MIC) with a microscopy image analysis application. We experimentally evaluate the performance of computing devices on core operations of the application. We correlate the observed performance with the characteristics of computing devices and data access patterns, computation complexities, and parallelization forms of the operations. The results show a significant variability in the performance of operations with respect to the device used. The performances of operations with regular data access are comparable or sometimes better on a MIC than that on a GPU. GPUs are more efficient than MICs for operations that access data irregularly, because of the lower bandwidth of the MIC for random data accesses. We propose new performance-aware scheduling strategies that consider variabilities in operation speedups. Our scheduling strategies significantly improve application performance compared to classic strategies in hybrid configurations. PMID:28239253

  13. Effect of a core conditioning intervention on tests of trunk muscular endurance in school-aged children.

    PubMed

    Allen, Brett A; Hannon, James C; Burns, Ryan D; Williams, Skip M

    2014-07-01

    Trunk and core muscular development has been advocated to increase athletic performance and for maintenance of musculoskeletal health, especially related to the prevention of low back pain (LBP). The purpose of this study was to examine the effects of a simple core conditioning routine on tests of trunk and core muscular endurance in school-aged children. Participants included 164 students (86 girls, 78 boys; mean age, 11.5 ± 2.5 years) recruited from a grade school in a metropolitan area located in the southwestern United States. Students performed an equipment-free, moderate-to-high intensity, dynamic core conditioning warm-up routine once a week for a period of 6 weeks during the start of their physical education classes. The intervention consisted of 10 different dynamic core conditioning exercises performed at a 30-second duration per exercise totaling 5 minutes per session. Pre- and post-assessments of muscular endurance consisted of 5 different trunk and core muscular endurance tests: Parallel Roman Chair Dynamic Back Extension, Prone Plank, Lateral Plank, Dynamic Curl-Up, and Static Curl-up. A generalized estimation equation was used to analyze differences in pre- and post-intervention muscular fitness assessments controlling for gender and grade level. Analysis of the data revealed significant increases in muscular fitness test performance for each of the 5 measured outcomes (p < 0.001). Because risk factors of LBP are thought to commence during childhood, results of this study suggest that it may be desirable for children and adolescents to perform moderate-to-high intensity dynamic core exercises during physical education warm-up to improve trunk and core muscular endurance.

  14. Perkins Core Performance Measures: Results and Targets, 2001-2002.

    ERIC Educational Resources Information Center

    McHewitt, Earl R.; Taylor, Garry

    This report addresses the Virginia Community College System's (VCCS) core performance standards and measures for the years 2001-2002. There are four core indicators through which the VCCS is assessed. They are the following: (1) student attainment including academic and technical skills; (2) completion/graduation rate using first time, full-time…

  15. Core subjects at the end of primary school: identifying and explaining relative strengths of children with specific language impairment (SLI)

    PubMed Central

    Durkin, Kevin; Mok, Pearl L H; Conti-Ramsden, Gina

    2015-01-01

    Background In general, children with specific language impairment (SLI) tend to fall behind their typically developing (TD) peers in educational attainment. Less is known about how children with SLI fare in particular areas of the curriculum and what predicts their levels of performance. Aims To compare the distributions of performance of children with SLI in three core school subjects (English, Mathematics and Science); to test the possibility that performance would vary across the core subjects; and to examine the extent to which language impairment predicts performance. Methods & Procedures This study was conducted in England and reports historical data on educational attainments. Teacher assessment and test scores of 176 eleven-year-old children with SLI were examined in the three core subjects and compared with known national norms. Possible predictors of performance were measured, including language ability at ages 7 and 11, educational placement type, and performance IQ. Outcomes & Results Children with SLI, compared with national norms, were found to be at a disadvantage in core school subjects. Nevertheless, some children attained the levels expected of TD peers. Performance was poorest in English; relative strengths were indicated in Science and, to a lesser extent, in Mathematics. Language skills were significant predictors of performance in all three core subjects. PIQ was the strongest predictor for Mathematics. For Science, both early language skills at 7 years and PIQ made significant contributions. Conclusions & Implications Language impacts on the school performance of children with SLI, but differentially across subjects. English for these children is the most challenging of the core subjects, reflecting the high levels of language demand it incurs. Science is an area of relative strength and mathematics appears to be intermediate, arguably because some tasks in these subjects can be performed with less reliance on verbal processing. Many children with SLI do have the potential to reach or exceed educational targets that are set at national levels for TD children. PMID:25469890

  16. Advanced Burner Reactor with Breed-and-Burn Thorium Blankets for Improved Economics and Resource Utilization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Greenspan, Ehud

    2015-11-04

    This study assesses the feasibility of designing Seed and Blanket (S&B) Sodium-cooled Fast Reactor (SFR) to generate a significant fraction of the core power from radial thorium fueled blankets that operate on the Breed-and-Burn (B&B) mode without exceeding the radiation damage constraint of presently verified cladding materials. The S&B core is designed to maximize the fraction of neutrons that radially leak from the seed (or “driver”) into the subcritical blanket and reduce neutron loss via axial leakage. The blanket in the S&B core makes beneficial use of the leaking neutrons for improved economics and resource utilization. A specific objective ofmore » this study is to maximize the fraction of core power that can be generated by the blanket without violating the thermal hydraulic and material constraints. Since the blanket fuel requires no reprocessing along with remote fuel fabrication, a larger fraction of power from the blanket will result in a smaller fuel recycling capacity and lower fuel cycle cost per unit of electricity generated. A unique synergism is found between a low conversion ratio (CR) seed and a B&B blanket fueled by thorium. Among several benefits, this synergism enables the very low leakage S&B cores to have small positive coolant voiding reactivity coefficient and large enough negative Doppler coefficient even when using inert matrix fuel for the seed. The benefits of this synergism are maximized when using an annular seed surrounded by an inner and outer thorium blankets. Among the high-performance S&B cores designed to benefit from this unique synergism are: (1) the ultra-long cycle core that features a cycle length of ~7 years; (2) the high-transmutation rate core where the seed fuel features a TRU CR of 0.0. Its TRU transmutation rate is comparable to that of the reference Advanced Burner Reactor (ABR) with CR of 0.5 and the thorium blanket can generate close to 60% of the core power; but requires only one sixth of the reprocessing and fabrication capacity per unit of core power. Nevertheless, these high-performance cores were designed to set upper bounds on the S&B core performance by using larger height and pressure drop than those of typical SFR design. A study was subsequently undertaken to quantify the tradeoff between S&B core design variables and the core performance. This study concludes that a viable S&B core can be designed without significant deviation from SFR core design practices. For example, the S&B core with 120cm active height will be comparable in volume, HM mass and specific power with the S-PRISM core and could fit within the S-PRISM reactor vessel. 43% of this core power will be generated by the once-through thorium blanket; the required capacity for reprocessing and remote fuel fabrication per unit of electricity generated will be approximately one fifth of that for a comparable ABR. The sodium void worth of this 120cm tall S&B core is significantly less positive than that of the reference ABR and the Doppler coefficient is only slightly smaller even though the seed uses a fertile-free fuel. The seed in the high transmutation core requires inert matrix fuel (TRU-40Zr) that has been successfully irradiated by the Fuel Cycle Research & Development program. An additional sensitivity analysis was later conducted to remove the bias introduced by the discrepancy between radiation damage constraints -- 200 DPA applied for S&B cores and fast fluence of 4x1023 n(>0.1MeV)/cm2 applied for ABR core design. Although the performance characteristics of the S&B cores are sensitive to the radiation damage constraint applied, the S&B cores offer very significant performance improvements relative to the conventional ABR core design when using identical constraint.« less

  17. Strain-induced structural defects and their effects on the electrochemical performances of silicon core/germanium shell nanowire heterostructures

    DOE PAGES

    Lin, Yung-Chen; Kim, Dongheun; Li, Zhen; ...

    2016-12-14

    Here we report on strain-induced structural defect formation in core Si nanowire of Si/Ge core/shell nanowire heterostructure and influences of the structural defects on the electrochemical performances in lithium-ion battery anodes based on Si/Ge core/shell nanowire heterostructures. The induced structural defects consisting of stacking faults and dislocations in the core Si nanowire were observed for the first time. The generation of stacking faults in Si/Ge core/shell nanowire heterostructure is observed to prefer settling in either only Ge shell region or in both Ge shell and Si core regions and is associated with the increase of the shell volume fraction. Themore » relax of misfit strain in [112] oriented core/shell nanowire heterostructure leads to subsequent gliding of Shockley partial dislocations, preferentially forming the twins. The observation of cross-over defect formation is of great importance for the understanding of heteroepitaxy in radial heterostructures at nanoscale and building the three dimensional heterostructures for the various applications. In addition, the effect of the defect formation on nanomaterial’s functionality is investigated by electrochemical performance test. The Si/Ge core/shell nanowire heterostructures enhance the gravimetric capacity of lithium ion battery anodes under fast charging/discharging rates compared to Si nanowires. However, the induced structural defects hamper lithiation of the Si/Ge core/shell nanowire heterostructure.« less

  18. Strain-induced structural defects and their effects on the electrochemical performances of silicon core/germanium shell nanowire heterostructures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lin, Yung-Chen; Kim, Dongheun; Li, Zhen

    Here we report on strain-induced structural defect formation in core Si nanowire of Si/Ge core/shell nanowire heterostructure and influences of the structural defects on the electrochemical performances in lithium-ion battery anodes based on Si/Ge core/shell nanowire heterostructures. The induced structural defects consisting of stacking faults and dislocations in the core Si nanowire were observed for the first time. The generation of stacking faults in Si/Ge core/shell nanowire heterostructure is observed to prefer settling in either only Ge shell region or in both Ge shell and Si core regions and is associated with the increase of the shell volume fraction. Themore » relax of misfit strain in [112] oriented core/shell nanowire heterostructure leads to subsequent gliding of Shockley partial dislocations, preferentially forming the twins. The observation of cross-over defect formation is of great importance for the understanding of heteroepitaxy in radial heterostructures at nanoscale and building the three dimensional heterostructures for the various applications. In addition, the effect of the defect formation on nanomaterial’s functionality is investigated by electrochemical performance test. The Si/Ge core/shell nanowire heterostructures enhance the gravimetric capacity of lithium ion battery anodes under fast charging/discharging rates compared to Si nanowires. However, the induced structural defects hamper lithiation of the Si/Ge core/shell nanowire heterostructure.« less

  19. 20 CFR 666.120 - What are the procedures for negotiating annual levels of performance?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... performance for each core indicator and the customer satisfaction indicators. In negotiating these levels, the... customer satisfaction; (3) The extent to which the levels of performance promote continuous improvement and... Governor must reach agreement on levels of performance for each core indicator and the customer...

  20. 20 CFR 641.740 - How will the Department determine whether a grantee fails, meets, or exceeds the expected levels...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... grantee fails, meets, or exceeds the expected levels of performance for the core indicators and what will... determine whether a grantee fails, meets, or exceeds the expected levels of performance for the core... such levels) by aggregating the grantee's core indicators. The aggregate is calculated by combining the...

  1. Initial Performance Results on IBM POWER6

    NASA Technical Reports Server (NTRS)

    Saini, Subbash; Talcott, Dale; Jespersen, Dennis; Djomehri, Jahed; Jin, Haoqiang; Mehrotra, Piysuh

    2008-01-01

    The POWER5+ processor has a faster memory bus than that of the previous generation POWER5 processor (533 MHz vs. 400 MHz), but the measured per-core memory bandwidth of the latter is better than that of the former (5.7 GB/s vs. 4.3 GB/s). The reason for this is that in the POWER5+, the two cores on the chip share the L2 cache, L3 cache and memory bus. The memory controller is also on the chip and is shared by the two cores. This serializes the path to memory. For consistently good performance on a wide range of applications, the performance of the processor, the memory subsystem, and the interconnects (both latency and bandwidth) should be balanced. Recognizing this, IBM has designed the Power6 processor so as to avoid the bottlenecks due to the L2 cache, memory controller and buffer chips of the POWER5+. Unlike the POWER5+, each core in the POWER6 has its own L2 cache (4 MB - double that of the Power5+), memory controller and buffer chips. Each core in the POWER6 runs at 4.7 GHz instead of 1.9 GHz in POWER5+. In this paper, we evaluate the performance of a dual-core Power6 based IBM p6-570 system, and we compare its performance with that of a dual-core Power5+ based IBM p575+ system. In this evaluation, we have used the High- Performance Computing Challenge (HPCC) benchmarks, NAS Parallel Benchmarks (NPB), and four real-world applications--three from computational fluid dynamics and one from climate modeling.

  2. Efficient provisioning for multi-core applications with LSF

    NASA Astrophysics Data System (ADS)

    Dal Pra, Stefano

    2015-12-01

    Tier-1 sites providing computing power for HEP experiments are usually tightly designed for high throughput performances. This is pursued by reducing the variety of supported use cases and tuning for performances those ones, the most important of which have been that of singlecore jobs. Moreover, the usual workload is saturation: each available core in the farm is in use and there are queued jobs waiting for their turn to run. Enabling multi-core jobs thus requires dedicating a number of hosts where to run, and waiting for them to free the needed number of cores. This drain-time introduces a loss of computing power driven by the number of unusable empty cores. As an increasing demand for multi-core capable resources have emerged, a Task Force have been constituted in WLCG, with the goal to define a simple and efficient multi-core resource provisioning model. This paper details the work done at the INFN Tier-1 to enable multi-core support for the LSF batch system, with the intent of reducing to the minimum the average number of unused cores. The adopted strategy has been that of dedicating to multi-core a dynamic set of nodes, whose dimension is mainly driven by the number of pending multi-core requests and fair-share priority of the submitting user. The node status transition, from single to multi core et vice versa, is driven by a finite state machine which is implemented in a custom multi-core director script, running in the cluster. After describing and motivating both the implementation and the details specific to the LSF batch system, results about performance are reported. Factors having positive and negative impact on the overall efficiency are discussed and solutions to reduce at most the negative ones are proposed.

  3. Theoretical study of geometry relaxation following core excitation: H2O, NH3, and CH4

    NASA Astrophysics Data System (ADS)

    Takahashi, Osamu; Kunitake, Naoto; Takaki, Saya

    2015-10-01

    Single core-hole (SCH) and double core-hole excited state molecular dynamics (MD) calculations for neutral and cationic H2O, NH3, and CH4 have been performed to examine geometry relaxation after core excitation. We observed faster X-H (X = C, N, O) bond elongation for the core-ionized state produced from the valence cationic molecule and the double-core-ionized state produced from the ground and valence cationic molecules than for the first resonant SCH state. Using the results of SCH MD simulations of the ground and valence cationic molecules, Auger decay spectra calculations were performed. We found that fast bond scission leads to peak broadening of the spectra.

  4. Aero-acoustic performance comparison of core engine noise suppressors on NASA quiet engine C

    NASA Technical Reports Server (NTRS)

    Bloomer, H. E.; Schaefer, J. W.

    1977-01-01

    The relative aero-acoustic effectiveness of two core engine suppressors, a contractor-designed suppressor delivered with the Quiet Engine, and a NASA-designed suppressor was evaluated. The NASA suppressor was tested with and without a splitter making a total of three configurations being reported in addition to the baseline hardwall case. The aerodynamic results are presented in terms of tailpipe pressure loss, corrected net thrust, and corrected specific fuel consumption as functions of engine power setting. The acoustic results are divided into duct and far-field acoustic data. The NASA-designed core suppressor did the better job of suppressing aft end noise, but the splitter associated with it caused a significant engine performance penality. The NASA core suppressor without the spltter suppressed most of the core noise without any engine performance penalty.

  5. Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

    PubMed

    Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

    2012-01-01

    Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

  6. Nano-engineering of three-dimensional core/shell nanotube arrays for high performance supercapacitors

    NASA Astrophysics Data System (ADS)

    Grote, Fabian; Wen, Liaoyong; Lei, Yong

    2014-06-01

    Large-scale arrays of core/shell nanostructures are highly desirable to enhance the performance of supercapacitors. Here we demonstrate an innovative template-based fabrication technique with high structural controllability, which is capable of synthesizing well-ordered three-dimensional arrays of SnO2/MnO2 core/shell nanotubes for electrochemical energy storage in supercapacitor applications. The SnO2 core is fabricated by atomic layer deposition and provides a highly electrical conductive matrix. Subsequently a thin MnO2 shell is coated by electrochemical deposition onto the SnO2 core, which guarantees a short ion diffusion length within the shell. The core/shell structure shows an excellent electrochemical performance with a high specific capacitance of 910 F g-1 at 1 A g-1 and a good rate capability of remaining 217 F g-1 at 50 A g-1. These results shall pave the way to realize aqueous based asymmetric supercapacitors with high specific power and high specific energy.

  7. Superglue from bacteria: unbreakable bridges for protein nanotechnology.

    PubMed

    Veggiani, Gianluca; Zakeri, Bijan; Howarth, Mark

    2014-10-01

    Biotechnology is often limited by weak interactions. We suggest that an ideal interaction between proteins would be covalent, specific, require addition of only a peptide tag to the protein of interest, and form under a wide range of conditions. Here we summarize peptide tags that are able to form spontaneous amide bonds, based on harnessing reactions of adhesion proteins from the bacterium Streptococcus pyogenes. These include the irreversible peptide-protein interaction of SpyTag with SpyCatcher, as well as irreversible peptide-peptide interactions via SpyLigase. We describe existing applications, including polymerization to enhance cancer cell capture, assembly of living biomaterial, access to diverse protein shapes, and improved enzyme resilience. We also indicate future opportunities for resisting biological force and extending the scope of protein nanotechnology. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Separation efficiency of the MASHA facility for short-lived mercury isotopes

    NASA Astrophysics Data System (ADS)

    Rodin, A. M.; Belozerov, A. V.; Chernysheva, E. V.; Dmitriev, S. N.; Gulyaev, A. V.; Gulyaeva, A. V.; Itkis, M. G.; Kliman, J.; Kondratiev, N. A.; Krupa, L.; Novoselov, A. S.; Oganessian, Yu. Ts.; Podshibyakin, A. V.; Salamatin, V. S.; Siváček, I.; Stepantsov, S. V.; Vanin, D. V.; Vedeneev, V. Yu.; Yukhimchuk, S. A.; Granja, C.; Pospisil, S.

    2014-06-01

    The mass-separator MASHA built to identify Super Heavy Elements by their mass-to-charge ratios is described. The results of the off- and on-line measurements of its separation efficiency are presented. In the former case four calibrated leaks of noble gases were used. In the latter the efficiency was measured via 284 MeV Ar beam and with using the hot catcher. The ECR ion source was used in both cases. The -radioactive isotopes of mercury produced in the complete fusion reaction Ar+SmHg+xn were detected at the mass-separator focal plane. The half-lives and the separation efficiency for the short-lived mercury isotopes were measured. Potentialities of the MEDIPIX detector system have been demonstrated for future use at the mass-separator MASHA.

  9. System Developed for Real-Time Blade-Flutter Monitoring in the Wind Tunnel

    NASA Technical Reports Server (NTRS)

    Kurkov, Anatole P.; Dhadwal, Harbans S.; Radzikowski, mark; Strukov, Dmitri

    2005-01-01

    A real-time system has been developed to monitor flutter vibrations in turbomachinery. The system is designed for continuous processing of blade tip timing data at a rate of 10 MB/sec. A USB 2.0 interface provides uninterrupted real-time processing of the data, and the blade-tip arrival times are measured with a 50-MHz oscillator and a 24-bit pipelined architecture counter. The input stage includes a glitch catcher, which reduces the probability of detecting a ghost blade to negligible levels. A graphical user interface provides online interrogation of any blade tip from any light probe sensor. Alternatively, data from all blades and all sensors can be superimposed into a single composite scatter plot displaying the vibration amplitude of each blade.

  10. The role of socioeconomic status in adolescent literature.

    PubMed

    Pearlman, M

    1995-01-01

    This article attempts to establish that socioeconomic status (SES) plays an important role in the lives of adolescents and is reflected in adolescent literature. The emphasis on SES in four adolescent novels: The Outsiders by S.E. Hinton, To Kill a Mockingbird by Harper Lee, The Catcher in the Rye by J. D. Salinger, and The Pigman by Paul Zindel suggests that both the authors and their young readers are aware of its influence in today's society. Three areas which are greatly affected by SES are examined: adolescents' self-esteem, how it affects characterization and subsequently the degree to which adolescents identify with a literary character, and how it functions as a learning device, enabling authors to infuse their own moral values into the minds of their audiences.

  11. Titanium dioxide@polypyrrole core-shell nanowires for all solid-state flexible supercapacitors.

    PubMed

    Yu, Minghao; Zeng, Yinxiang; Zhang, Chong; Lu, Xihong; Zeng, Chenghui; Yao, Chenzhong; Yang, Yangyi; Tong, Yexiang

    2013-11-21

    Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance.

  12. Fuel cell performance of palladium-platinum core-shell electrocatalysts synthesized in gram-scale batches

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Khateeb, Siddique; Su, Dong; Guerreo, Sandra

    This article presents the performance of palladium-platinum core-shell catalysts (Pt/Pd/C) for oxygen reduction synthesized in gram-scale batches in both liquid cells and polymer-electrolyte membrane fuel cells. Core-shell catalyst synthesis and characterization, ink fabrication, and cell assembly details are discussed. The Pt mass activity of the Pt/Pd core-shell catalyst was 0.95 A mg –1 at 0.9 V measured in liquid cells (0.1 M HClO4), which was 4.8 times higher than a commercial Pt/C catalyst. The performances of Pt/Pd/C and Pt/C in large single cells (315 cm 2) were assessed under various operating conditions. The core-shell catalyst showed consistently higher performance thanmore » commercial Pt/C in fuel cell testing. A 20–60 mV improvement across the whole current density range was observed on air. Sensitivities to temperature, humidity, and gas composition were also investigated and the core-shell catalyst showed a consistent benefit over Pt under all conditions. However, the 4.8 times activity enhancement predicated by liquid cell measurements was not fully realized in fuel cells.« less

  13. Fuel cell performance of palladium-platinum core-shell electrocatalysts synthesized in gram-scale batches

    DOE PAGES

    Khateeb, Siddique; Su, Dong; Guerreo, Sandra; ...

    2016-05-03

    This article presents the performance of palladium-platinum core-shell catalysts (Pt/Pd/C) for oxygen reduction synthesized in gram-scale batches in both liquid cells and polymer-electrolyte membrane fuel cells. Core-shell catalyst synthesis and characterization, ink fabrication, and cell assembly details are discussed. The Pt mass activity of the Pt/Pd core-shell catalyst was 0.95 A mg –1 at 0.9 V measured in liquid cells (0.1 M HClO4), which was 4.8 times higher than a commercial Pt/C catalyst. The performances of Pt/Pd/C and Pt/C in large single cells (315 cm 2) were assessed under various operating conditions. The core-shell catalyst showed consistently higher performance thanmore » commercial Pt/C in fuel cell testing. A 20–60 mV improvement across the whole current density range was observed on air. Sensitivities to temperature, humidity, and gas composition were also investigated and the core-shell catalyst showed a consistent benefit over Pt under all conditions. However, the 4.8 times activity enhancement predicated by liquid cell measurements was not fully realized in fuel cells.« less

  14. Performance of High-frequency High-flux Magnetic Cores at Cryogenic Temperatures

    NASA Technical Reports Server (NTRS)

    Gerber, Scott S.; Hammoud, Ahmad; Elbuluk, Malik E.; Patterson, Richard L.

    2002-01-01

    Three magnetic powder cores and one ferrite core, which are commonly used in inductor and transformer design for switch mode power supplies, were selected for investigation at cryogenic temperatures. The powder cores are Molypermalloy Core (MPC), High Flux Core (HFC), and Kool Mu Core (KMC). The performance of four inductors utilizing these cores has been evaluated as a function of temperature from 20 C to -180 C. All cores were wound with the same wire type and gauge to obtain equal values of inductance at room temperature. Each inductor was evaluated in terms of its inductance, quality (Q) factor, resistance, and dynamic hysteresis characteristics (B-H loop) as a function of temperature and frequency. Both sinusoidal and square wave excitations were used in these investigations. Measured data obtained on the inductance showed that both the MPC and the HFC cores maintain a constant inductance value, whereas with the KMC and ferrite core hold a steady value in inductance with frequency but decrease as temperature is decreased. All cores exhibited dependency, with varying degrees, in their quality factor and resistance on test frequency and temperature. Except for the ferrite, all cores exhibited good stability in the investigated properties with temperature as well as frequency. Details of the experimental procedures and test results are presented and discussed in the paper.

  15. EVALUATION OF THE HTA CORE MODEL FOR NATIONAL HEALTH TECHNOLOGY ASSESSMENT REPORTS: COMPARATIVE STUDY AND EXPERIENCES FROM EUROPEAN COUNTRIES.

    PubMed

    Kõrge, Kristina; Berndt, Nadine; Hohmann, Juergen; Romano, Florence; Hiligsmann, Mickael

    2017-01-01

    The health technology assessment (HTA) Core Model® is a tool for defining and standardizing the elements of HTA analyses within several domains for producing structured reports. This study explored the parallels between the Core Model and a national HTA report. Experiences from various European HTA agencies were also investigated to determine the Core Model's adaptability to national reports. A comparison between a national report on Genetic Counseling, produced by the Cellule d'expertise médicale Luxembourg, and the Core Model was performed to identify parallels in terms of relevant and comparable assessment elements (AEs). Semi-structured interviews with five representatives from European HTA agencies were performed to assess their user experiences with the Core Model. The comparative study revealed that 50 percent of the total number (n = 144) of AEs in the Core Model were relevant for the national report. Of these 144 AEs from the Core Model, 34 (24 percent) were covered in the national report. Some AEs were covered only partly. The interviewees emphasized flexibility in using the Core Model and stated that the most important aspects to be evaluated include characteristics of the disease and technology, clinical effectiveness, economic aspects, and safety. In the present study, the national report covered an acceptable number of AEs of the Core Model. These results need to be interpreted with caution because only one comparison was performed. The Core Model can be used in a flexible manner, applying only those elements that are relevant from the perspective of the technology assessment and specific country context.

  16. A New Capability for Nuclear Thermal Propulsion Design

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Amiri, Benjamin W.; Nuclear and Radiological Engineering Department, University of Florida, Gainesville, FL 32611; Kapernick, Richard J.

    2007-01-30

    This paper describes a new capability for Nuclear Thermal Propulsion (NTP) design that has been developed, and presents the results of some analyses performed with this design tool. The purpose of the tool is to design to specified mission and material limits, while maximizing system thrust to weight. The head end of the design tool utilizes the ROCket Engine Transient Simulation (ROCETS) code to generate a system design and system design requirements as inputs to the core analysis. ROCETS is a modular system level code which has been used extensively in the liquid rocket engine industry for many years. Themore » core design tool performs high-fidelity reactor core nuclear and thermal-hydraulic design analysis. At the heart of this process are two codes TMSS-NTP and NTPgen, which together greatly automate the analysis, providing the capability to rapidly produce designs that meet all specified requirements while minimizing mass. A PERL based command script, called CORE DESIGNER controls the execution of these two codes, and checks for convergence throughout the process. TMSS-NTP is executed first, to produce a suite of core designs that meet the specified reactor core mechanical, thermal-hydraulic and structural requirements. The suite of designs consists of a set of core layouts and, for each core layout specific designs that span a range of core fuel volumes. NTPgen generates MCNPX models for each of the core designs from TMSS-NTP. Iterative analyses are performed in NTPgen until a reactor design (fuel volume) is identified for each core layout that meets cold and hot operation reactivity requirements and that is zoned to meet a radial core power distribution requirement.« less

  17. Engineering of high performance supercapacitor electrode based on Fe-Ni/Fe{sub 2}O{sub 3}-NiO core/shell hybrid nanostructures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singh, Ashutosh K., E-mail: ashuvishen@gmail.com, E-mail: aksingh@bose.res.in; Mandal, Kalyan

    The present work reports on fabrication and supercapacitor applications of a core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures (HNs) electrode. The core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures have been fabricated through a two step method (nanowire fabrication and their controlled oxidation). The 1D hybrid nanostructure consists of highly porous shell layer (redox active materials NiO and Fe{sub 2}O{sub 3}) and the conductive core (FeNi nanowire). Thus, the highly porous shell layer allows facile electrolyte diffusion as well as faster redox reaction kinetics; whereas the conductive FeNi nanowire core provides the proficient express way for electrons to travel to the current collector,more » which helps in the superior electrochemical performance. The core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures electrode based supercapacitor shows very good electrochemical performances in terms of high specific capacitance nearly 1415 F g{sup −1} at a current density of 2.5 A g{sup −1}, excellent cycling stability and rate capability. The high quality electrochemical performance of core/shell hybrid nanostructures electrode shows its potential as an alternative electrode for forthcoming supercapacitor devices.« less

  18. Fabrication and characterization of optical sensors using metallic core-shell thin film nanoislands for ozone detection

    NASA Astrophysics Data System (ADS)

    Addanki, Satish; Nedumaran, D.

    2017-07-01

    Core-Shell nanostructures play a vital role in the sensor field owing to their performance improvements in sensing characteristics and well-established synthesis procedures. These nanostructures can be ingeniously tuned to achieve tailored properties for a particular application of interest. In this work, an Ag-Au core-shell thin film nanoislands with APTMS (3-Aminopropyl trimethoxysilane) and PVA (Polyvinyl alcohol) binding agents was modeled, synthesized and characterized. The simulation results were used to fabricate the sensor through chemical route. The results of this study confirmed that the APTMS based Ag-Au core-shell thin film nanoislands offered a better performance over the PVA based Ag-Au core-shell thin film nanoislands. Also, the APTMS based Ag-Au core-shell thin film nanoislands exhibited better sensitivity towards ozone sensing over the other types, viz., APTMS/PVA based Au-Ag core-shell and standalone Au/Ag thin film nanoislands.

  19. Review and role of plyometrics and core rehabilitation in competitive sport.

    PubMed

    Hill, John; Leiszler, Matthew

    2011-01-01

    Core stability and plyometric training have become common elements of training programs in competitive athletes. Core stability allows stabilization of the spine and trunk of the body in order to allow maximal translation of force to the extremities. Plyometric training is more dynamic and involves explosive-strength training. Integration of these exercises theoretically begins with core stabilization using more static exercises, allowing safe and effective transition to plyometric exercises. Both core strengthening and plyometric training have demonstrated mixed but generally positive results on injury prevention rehabilitation of certain types of injuries. Improvement in performance compared to other types of exercise is unclear at this time. This article discusses the theory and strategy behind core stability and plyometric training; reviews the literature on injury prevention, rehabilitation of injury, and performance enhancement with these modalities; and discusses the evaluation and rehabilitation of core stability.

  20. Aero-acoustic performance comparison of core engine noise suppressors on NASA quiet engine 'C'

    NASA Technical Reports Server (NTRS)

    Bloomer, H. E.; Schaefer, J. W.

    1977-01-01

    The purpose of the experimental program reported herein was to evaluate and compare the relative aero-acoustic effectiveness of two core engine suppressors, a contractor-designed suppressor delivered with the Quiet Engine, and a NASA-designed suppressor, designed and built subsequently. The NASA suppressor was tested with and without a splitter making a total of three configurations being reported in addition to the baseline hardwall case. The aerodynamic results are presented in terms of tailpipe pressure loss, corrected net thrust, and corrected specific fuel consumption as functions of engine power setting. The acoustic results are divided into duct and far-field acoustic data. The NASA-designed core suppressor did the better job of suppressing aft end noise, but the splitter associated with it caused a significant engine performance penalty. The NASA core suppressor without the splitter suppressed most of the core noise without any engine performance penalty.

  1. Core subjects at the end of primary school: identifying and explaining relative strengths of children with specific language impairment (SLI).

    PubMed

    Durkin, Kevin; Mok, Pearl L H; Conti-Ramsden, Gina

    2015-01-01

    In general, children with specific language impairment (SLI) tend to fall behind their typically developing (TD) peers in educational attainment. Less is known about how children with SLI fare in particular areas of the curriculum and what predicts their levels of performance. To compare the distributions of performance of children with SLI in three core school subjects (English, Mathematics and Science); to test the possibility that performance would vary across the core subjects; and to examine the extent to which language impairment predicts performance. This study was conducted in England and reports historical data on educational attainments. Teacher assessment and test scores of 176 eleven-year-old children with SLI were examined in the three core subjects and compared with known national norms. Possible predictors of performance were measured, including language ability at ages 7 and 11, educational placement type, and performance IQ. Children with SLI, compared with national norms, were found to be at a disadvantage in core school subjects. Nevertheless, some children attained the levels expected of TD peers. Performance was poorest in English; relative strengths were indicated in Science and, to a lesser extent, in Mathematics. Language skills were significant predictors of performance in all three core subjects. PIQ was the strongest predictor for Mathematics. For Science, both early language skills at 7 years and PIQ made significant contributions. Language impacts on the school performance of children with SLI, but differentially across subjects. English for these children is the most challenging of the core subjects, reflecting the high levels of language demand it incurs. Science is an area of relative strength and mathematics appears to be intermediate, arguably because some tasks in these subjects can be performed with less reliance on verbal processing. Many children with SLI do have the potential to reach or exceed educational targets that are set at national levels for TD children. © 2014 The Authors International Journal of Language & Communication Disorders published by John Wiley & Sons Ltd on behalf of Royal College of Speech and Language Therapists.

  2. 20 CFR 666.240 - Under what circumstances may a sanction be applied to a State that fails to achieve negotiated...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... agreed to under § 666.120 for core indicators of performance or customer satisfaction indicators for the... meet the negotiated levels of performance for core indicators of performance or customer satisfaction... indicators of performance and customer satisfaction indicators for that program. (WIA sec. 136(g).) (d) Only...

  3. Practical comparison of 2.7 microm fused-core silica particles and porous sub-2 microm particles for fast separations in pharmaceutical process development.

    PubMed

    Abrahim, Ahmed; Al-Sayah, Mohammad; Skrdla, Peter; Bereznitski, Yuri; Chen, Yadan; Wu, Naijun

    2010-01-05

    Fused-core silica stationary phases represent a key technological advancement in the arena of fast HPLC separations. These phases are made by fusing a 0.5 microm porous silica layer onto 1.7 microm nonporous silica cores. The reduced intra-particle flow path of the fused particles provides superior mass transfer kinetics and better performance at high mobile phase velocities, while the fused-core particles provide lower pressure than sub-2 microm particles. In this work, chromatographic performance of the fused-core particles (Ascentis Express) was investigated and compared to that of sub-2 microm porous particles (1.8 microm Zorbax Eclipse Plus C18 and 1.7 microm Acquity BEH C18). Specifically, retention, selectivity, and loading capacity were systematically compared for these two types of columns. Other chromatographic parameters such as efficiency and pressure drop were also studied. Although the fused-core column was found to provide better analyte shape selectivity, both columns had similar hydrophobic, hydrogen bonding, total ion-exchange, and acidic ion-exchange selectivities. As expected, the retention factors and sample loading capacity on the fused-core particle column were slightly lower than those for the sub-2 microm particle column. However, the most dramatic observation was that similar efficiency separations to the sub-2 microm particles could be achieved using the fused-core particles, without the expense of high column back pressure. The low pressure of the fused-core column allows fast separations to be performed routinely on a conventional LC system without significant loss in efficiency or resolution. Applications to the HPLC impurity profiling of drug substance candidates were performed using both types of columns to validate this last point.

  4. Tailored Core Shell Cathode Powders for Solid Oxide Fuel Cells

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Swartz, Scott

    2015-03-23

    In this Phase I SBIR project, a “core-shell” composite cathode approach was evaluated for improving SOFC performance and reducing degradation of lanthanum strontium cobalt ferrite (LSCF) cathode materials, following previous successful demonstrations of infiltration approaches for achieving the same goals. The intent was to establish core-shell cathode powders that enabled high performance to be obtained with “drop-in” process capability for SOFC manufacturing (i.e., rather than adding an infiltration step to the SOFC manufacturing process). Milling, precipitation and hetero-coagulation methods were evaluated for making core-shell composite cathode powders comprised of coarse LSCF “core” particles and nanoscale “shell” particles of lanthanum strontiummore » manganite (LSM) or praseodymium strontium manganite (PSM). Precipitation and hetero-coagulation methods were successful for obtaining the targeted core-shell morphology, although perfect coverage of the LSCF core particles by the LSM and PSM particles was not obtained. Electrochemical characterization of core-shell cathode powders and conventional (baseline) cathode powders was performed via electrochemical impedance spectroscopy (EIS) half-cell measurements and single-cell SOFC testing. Reliable EIS testing methods were established, which enabled comparative area-specific resistance measurements to be obtained. A single-cell SOFC testing approach also was established that enabled cathode resistance to be separated from overall cell resistance, and for cathode degradation to be separated from overall cell degradation. The results of these EIS and SOFC tests conclusively determined that the core-shell cathode powders resulted in significant lowering of performance, compared to the baseline cathodes. Based on the results of this project, it was concluded that the core-shell cathode approach did not warrant further investigation.« less

  5. Biomechanical Evaluation of a Tooth Restored with High Performance Polymer PEKK Post-Core System: A 3D Finite Element Analysis.

    PubMed

    Lee, Ki-Sun; Shin, Joo-Hee; Kim, Jong-Eun; Kim, Jee-Hwan; Lee, Won-Chang; Shin, Sang-Wan; Lee, Jeong-Yol

    2017-01-01

    The aim of this study was to evaluate the biomechanical behavior and long-term safety of high performance polymer PEKK as an intraradicular dental post-core material through comparative finite element analysis (FEA) with other conventional post-core materials. A 3D FEA model of a maxillary central incisor was constructed. A cyclic loading force of 50 N was applied at an angle of 45° to the longitudinal axis of the tooth at the palatal surface of the crown. For comparison with traditionally used post-core materials, three materials (gold, fiberglass, and PEKK) were simulated to determine their post-core properties. PEKK, with a lower elastic modulus than root dentin, showed comparably high failure resistance and a more favorable stress distribution than conventional post-core material. However, the PEKK post-core system showed a higher probability of debonding and crown failure under long-term cyclic loading than the metal or fiberglass post-core systems.

  6. Biomechanical Evaluation of a Tooth Restored with High Performance Polymer PEKK Post-Core System: A 3D Finite Element Analysis

    PubMed Central

    Shin, Joo-Hee; Kim, Jong-Eun; Kim, Jee-Hwan; Lee, Won-Chang; Shin, Sang-Wan

    2017-01-01

    The aim of this study was to evaluate the biomechanical behavior and long-term safety of high performance polymer PEKK as an intraradicular dental post-core material through comparative finite element analysis (FEA) with other conventional post-core materials. A 3D FEA model of a maxillary central incisor was constructed. A cyclic loading force of 50 N was applied at an angle of 45° to the longitudinal axis of the tooth at the palatal surface of the crown. For comparison with traditionally used post-core materials, three materials (gold, fiberglass, and PEKK) were simulated to determine their post-core properties. PEKK, with a lower elastic modulus than root dentin, showed comparably high failure resistance and a more favorable stress distribution than conventional post-core material. However, the PEKK post-core system showed a higher probability of debonding and crown failure under long-term cyclic loading than the metal or fiberglass post-core systems. PMID:28386547

  7. Examining High-Stakes Testing--Forum. "Education Next" Talks with Joshua P. Starr and Margaret Spellings

    ERIC Educational Resources Information Center

    Starr, Joshua P.; Spellings, Margaret

    2014-01-01

    More than 40 states plan to assess student performance with new tests tied to the Common Core State Standards. In summer 2013, results from Common Core-aligned tests in New York showed a steep decline in outcomes. Common Core advocates hailed the scores as an honest accounting of school and student performance, while others worried that they…

  8. Arthroscopic-assisted core decompression of the humeral head.

    PubMed

    Dines, Joshua S; Strauss, Eric J; Fealy, Stephen; Craig, Edward V

    2007-01-01

    Humeral head osteonecrosis is a progressive disease that requires prompt diagnosis and treatment. Core decompression is a viable treatment option for early-stage cases. Most surgeons perform core decompression by arthroscopically visualizing the necrotic area of bone and using a cannulated drill to take a core. Several attempts are frequently needed to reach the proper location. In the hip multiple passes are associated with complications. We describe the use of an anterior cruciate ligament (ACL) tibial drill guide to precisely localize the area of necrotic bone. Diagnostic arthroscopy is performed to assess the areas of osteonecrosis. Core decompression is performed by use of an ACL tibial guide, brought in through the anterior or posterior portal to precisely localize the necrotic area in preparation for drilling. Under image intensification, Steinmann pins are advanced into the area of osteonecrosis. Once positioned, several 4-mm cores are made. We treated 3 patients with this technique, and all had immediate pain relief. The use of the ACL guide allows precise localization of the area of humeral head involvement and avoids multiple drillings into unaffected areas. Initial indications are that arthroscopic-assisted core decompression with an ACL guide is an effective alternative to previously used methods.

  9. Influence of Nonfused Cores on the Photovoltaic Performance of Linear Triphenylamine-Based Hole-Transporting Materials for Perovskite Solar Cells.

    PubMed

    Wu, Yungen; Wang, Zhihui; Liang, Mao; Cheng, Hua; Li, Mengyuan; Liu, Liyuan; Wang, Baiyue; Wu, Jinhua; Prasad Ghimire, Raju; Wang, Xuda; Sun, Zhe; Xue, Song; Qiao, Qiquan

    2018-05-30

    The core plays a crucial role in achieving high performance of linear hole transport materials (HTMs) toward the perovskite solar cells (PSCs). Most studies focused on the development of fused heterocycles as cores for HTMs. Nevertheless, nonfused heterocycles deserve to be studied since they can be easily synthesized. In this work, we reported a series of low-cost triphenylamine HTMs (M101-M106) with different nonfused cores. Results concluded that the introduced core has a significant influence on conductivity, hole mobility, energy level, and solubility of linear HTMs. M103 and M104 with nonfused oligothiophene cores are superior to other HTMs in terms of conductivity, hole mobility, and surface morphology. PSCs based on M104 exhibited the highest power conversion efficiency of 16.50% under AM 1.5 sun, which is comparable to that of spiro-OMeTAD (16.67%) under the same conditions. Importantly, the employment of M104 is highly economical in terms of the cost of synthesis as compared to that of spiro-OMeTAD. This work demonstrated that nonfused heterocycles, such as oligothiophene, are promising cores for high performance of linear HTMs toward PSCs.

  10. Quiet Clean Short-haul Experimental Engine (QCSEE). Aerodynamic and aeromechanical performance of a 50.8 cm (20 inch) diameter 1.34 PR variable pitch fan with core flow

    NASA Technical Reports Server (NTRS)

    Giffin, R. G.; Mcfalls, R. A.; Beacher, B. F.

    1977-01-01

    The fan aerodynamic and aeromechanical performance tests of the quiet clean short haul experimental engine under the wing fan and inlet with a simulated core flow are described. Overall forward mode fan performance is presented at each rotor pitch angle setting with conventional flow pressure ratio efficiency fan maps, distinguishing the performance characteristics of the fan bypass and fan core regions. Effects of off design bypass ratio, hybrid inlet geometry, and tip radial inlet distortion on fan performance are determined. The nonaxisymmetric bypass OGV and pylon configuration is assessed relative to both total pressure loss and induced circumferential flow distortion. Reverse mode performance, obtained by resetting the rotor blades through both the stall pitch and flat pitch directions, is discussed in terms of the conventional flow pressure ratio relationship and its implications upon achievable reverse thrust. Core performance in reverse mode operation is presented in terms of overall recovery levels and radial profiles existing at the simulated core inlet plane. Observations of the starting phenomena associated with the initiation of stable rotor flow during acceleration in the reverse mode are briefly discussed. Aeromechanical response characteristics of the fan blades are presented as a separate appendix, along with a description of the vehicle instrumentation and method of data reduction.

  11. Kinect Technology Game Play to Mimic Quake Catcher Network (QCN) Sensor Deployment During a Rapid Aftershock Mobilization Program (RAMP)

    NASA Astrophysics Data System (ADS)

    Kilb, D. L.; Yang, A.; Rohrlick, D.; Cochran, E. S.; Lawrence, J.; Chung, A. I.; Neighbors, C.; Choo, Y.

    2011-12-01

    The Kinect technology allows for hands-free game play, greatly increasing the accessibility of gaming for those uncomfortable using controllers. How it works is the Kinect camera transmits invisible near-infrared light and measures its "time of flight" to reflect off an object, allowing it to distinguish objects within 1 centimeter in depth and 3 mm in height and width. The middleware can also respond to body gestures and voice commands. Here, we use the Kinect Windows SDK software to create a game that mimics how scientists deploy seismic instruments following a large earthquake. The educational goal of the game is to allow the players to explore 3D space as they learn about the Quake Catcher Network's (QCN) Rapid Aftershock Mobilization Program (RAMP). Many of the scenarios within the game are taken from factual RAMP experiences. To date, only the PC platform (or a Mac running PC emulator software) is available for use, but we hope to move to other platforms (e.g., Xbox 360, iPad, iPhone) as they become available. The game is written in programming language C# using Microsoft XNA and Visual Studio 2010, graphic shading is added using High Level Shader Language (HLSL), and rendering is produced using XNA's graphics libraries. Key elements of the game include selecting sensor locations, adequately installing the sensor, and monitoring the incoming data. During game play aftershocks can occur unexpectedly, as can other problems that require attention (e.g., power outages, equipment failure, and theft). The player accrues points for quickly deploying the first sensor (recording as many initial aftershocks as possible), correctly installing the sensors (orientation with respect to north, properly securing, and testing), distributing the sensors adequately in the region, and troubleshooting problems. One can also net points for efficient use of game play time. Setting up for game play in your local environment requires: (1) the Kinect hardware ( $145); (2) a computer with a Windows operating system (Mac users can use a Windows emulator); and (3) our free QCN game software (available from http://quakeinfo.ucsd.edu/ dkilb/WEB/QCN/Downloads.html).

  12. Mild traumatic brain injury in major and Minor League Baseball players.

    PubMed

    Green, Gary A; Pollack, Keshia M; D'Angelo, John; Schickendantz, Mark S; Caplinger, Roger; Weber, Kathleen; Valadka, Alex; McAllister, Thomas W; Dick, Randall W; Mandelbaum, Bert; Curriero, Frank C

    2015-05-01

    Although mild traumatic brain injury (MTBI) is not as common in professional baseball as in collision sports, it does occur and frequently results in significant loss of time away from the sport. To date, no study has investigated MTBI among an entire cohort of professional baseball players. To investigate MTBIs in major and minor league baseball players to determine the most common mechanisms of injury, activity at time of injury, position, level of play, and time lost, as well as ultimately inform prevention efforts. A secondary objective was to document the association between MTBI and return to play using several different measures. Descriptive epidemiologic study. Data were captured from a newly implemented league-wide injury surveillance system that records injuries among all professional baseball players as entered by certified athletic trainers and physicians. The MTBIs were identified with respect to level of play, activity, field location, and mechanism of injury. Time loss was assessed by 3 measures of return to play, and MTBI game rates were reported as injuries per 1000 athlete-exposures. Data were combined over the 2011-2012 seasons for analysis, and results were presented separately for minor and major league players. Chi-square tests were used to test the hypothesis of equal proportions between the various categories of MTBI injury characteristics. There were 41 reported MTBIs in the major leagues and 266 in the minor leagues over the 2-year period under study. The overall MTBI game rate across both major and minor league ball clubs was 0.42 per 1000 athlete-exposures. The median time lost was 9 days. Mild traumatic brain injury accounted for 1% of all injuries resulting in time lost from play. For MTBIs that occurred while fielding, catchers were significantly overrepresented. No differences were noted among the 3 measures of time lost. Mild traumatic brain injury is an important problem in professional baseball players, especially for catchers. This study provides a foundation for future inquiry to reduce the incidence of MTBI in those positions at greatest risk and to provide a baseline as rules and equipment evolve. © 2015 The Author(s).

  13. Interactions Between Wind Erosion, Vegetation Structure, and Soil Stability in Groundwater Dependent Plant Communities

    NASA Astrophysics Data System (ADS)

    Vest, K. R.; Elmore, A. J.; Okin, G. S.

    2009-12-01

    Desertification is a human induced global phenomenon causing a loss of biodiversity and ecosystem productivity. Semi-arid grasslands are vulnerable to anthropogenic impacts (i.e., groundwater pumping and surface water diversion) that decrease vegetation cover and increase bare soil area leading to a greater probability of soil erosion, potentially enhancing feedback processes associated with desertification. To enhance our understanding of interactions between anthropogenic, physical, and biological factors causing desertification, this study used a combination of modeling and field observations to examine the relationship between chronic groundwater pumping and vegetation cover change and its effects on soil erosion and stability. The work was conducted in Owens Valley California, where a long history of groundwater pumping and surface water diversion has lead to documented vegetation changes. The work examined hydrological, ecological and biogeochemical factors across thirteen sites in Owens Valley. We analyzed soil stability, vegetation and gap size, soil organic carbon, and we also installed Big Spring Number Eight (BSNE) catchers to calculate mass transport of aeolian sediment across sites. Mass transport calculations were used to validate a new wind erosion model that represents the effect of porous vegetation on surface windshear velocity. Results across two field seasons show that the model can be used to predict mass transport, and areas with increased groundwater pumping show a greater susceptibility to erosion. Sediment collected in BSNE catchers was positively correlated with site gap size. Additionally, areas with larger gap sizes have a greater threshold shear velocity and soil stability, yet mass transport was greater at these sites than at sites with smaller gap sizes. Although modeling is complicated by spatial variation in multiple model parameters (e.g., gap size, threshold shear velocity in gaps), our results support the hypothesis that soils with high organic matter are being eroded following the loss of vegetation cover due to groundwater decline leaving behind bare soil surfaces with less fertility hampering vegetation reestablishment. Desertification in this system is apparently easily initiated through groundwater decline due to the high friability of these meadow soils.

  14. Tank 241-B-108, cores 172 and 173 analytical results for the final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nuzum, J.L., Fluoro Daniel Hanford

    1997-03-04

    The Data Summary Table (Table 3) included in this report compiles analytical results in compliance with all applicable DQOS. Liquid subsamples that were prepared for analysis by an acid adjustment of the direct subsample are indicated by a `D` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a fusion digest are indicated by an `F` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a water digest are indicated by a I.wl. or an `I` in the A column of Table 3. Due to poormore » precision and accuracy in original analysis of both Lower Half Segment 2 of Core 173 and the core composite of Core 173, fusion and water digests were performed for a second time. Precision and accuracy improved with the repreparation of Core 173 Composite. Analyses with the repreparation of Lower Half Segment 2 of Core 173 did not show improvement and suggest sample heterogeneity. Results from both preparations are included in Table 3.« less

  15. Using DMA for copying performance counter data to memory

    DOEpatents

    Gara, Alan; Salapura, Valentina; Wisniewski, Robert W.

    2012-09-25

    A device for copying performance counter data includes hardware path that connects a direct memory access (DMA) unit to a plurality of hardware performance counters and a memory device. Software prepares an injection packet for the DMA unit to perform copying, while the software can perform other tasks. In one aspect, the software that prepares the injection packet runs on a processing core other than the core that gathers the hardware performance counter data.

  16. Using DMA for copying performance counter data to memory

    DOEpatents

    Gara, Alan; Salapura, Valentina; Wisniewski, Robert W

    2013-12-31

    A device for copying performance counter data includes hardware path that connects a direct memory access (DMA) unit to a plurality of hardware performance counters and a memory device. Software prepares an injection packet for the DMA unit to perform copying, while the software can perform other tasks. In one aspect, the software that prepares the injection packet runs on a processing core other than the core that gathers the hardware performance data.

  17. Decrement in manual arm performance during whole body cooling.

    PubMed

    Giesbrecht, G G; Bristow, G K

    1992-12-01

    Six subjects performed three manual arm tasks: 1) prior to immersion in 8 degrees C water; 2) soon after immersion to the neck, but prior to any decrease in core temperature; and 3) every 15 min until core temperatures decreased 2-4.5 degrees C. The tasks were speed of flexion and extension of the fingers, handgrip strength and manual dexterity. There was no immediate effect of cold immersion; however, all scores decreased significantly after core temperature decreased 0.5 degrees C. Further decrease in core temperature was associated with a progressive impairment of performance, although at a slower rate than during the first 0.5 degrees C decrease. Flexion and extension of the fingers was affected relatively more than handgrip strength or manual dexterity. Decrement in performance is a result of peripheral cooling on sensorimotor function with a probable additional effect of central cooling on cerebral function.

  18. An Empirical Determination of Tasks Essential to Successful Performance as a Chemical Applicator. Determination of a Common Core of Basic Skills in Agribusiness and Natural Resources.

    ERIC Educational Resources Information Center

    Miller, Daniel R.; And Others

    To improve vocational educational programs in agriculture, occupational information on a common core of basic skills within the occupational area of the chemical applicator is presented in the revised task inventory survey. The purpose of the occupational survey was to identify a common core of basic skills which are performed and are essential…

  19. Steady Flow Generated by a Core Oscillating in a Rotating Spherical Cavity

    NASA Astrophysics Data System (ADS)

    Kozlov, V. G.; Subbotin, S. V.

    2018-01-01

    Steady flow generated by oscillations of an inner solid core in a fluid-filled rotating spherical cavity is experimentally studied. The core with density less than the fluid density is located near the center of the cavity and is acted upon by a centrifugal force. The gravity field directed perpendicular to the rotation axis leads to a stationary displacement of the core from the rotation axis. As a result, in the frame of reference attached to the cavity, the core performs circular oscillation with frequency equal to the rotation frequency, and its center moves along a circular trajectory in the equatorial plane around the center of the cavity. For the differential rotation of the core to be absent, one of the poles of the core is connected to the nearest pole of the cavity with a torsionally elastic, flexible fishing line. It is found that the oscillation of the core generates axisymmetric azimuthal fluid flow in the cavity which has the form of nested liquid columns rotating with different angular velocities. Comparison with the case of a free oscillating core which performs mean differential rotation suggests the existence of two mechanisms of flow generation (due to the differential rotation of the core in the Ekman layer and due to the oscillation of the core in the oscillating boundary layers).

  20. Assessing Outside the Bubble: Performance Assessment for Common Core State Standards

    ERIC Educational Resources Information Center

    Bishop, Jesica M.; Bristow, Lora J.; Coriell, Bryn P.; Jensen, Mark E.; Johnson, Leif E.; Luring, Sara R.; Lyons-Tinsley, Mary Ann; Mefford, Megan M.; Neu, Gwen L.; Samulski, Emerson T.; Warner, Timothy D.; White, Mathew F.

    2011-01-01

    The adoption of Common Core State Standards has increased the need for assessments capable of measuring more performance-based outcomes. This monograph brings together the current literature and resources for the development and implementation of performance assessment. The text was written as part of a project-based graduate course and has…

  1. Core losses of a permanent magnet synchronous motor with an amorphous stator core under inverter and sinusoidal excitations

    NASA Astrophysics Data System (ADS)

    Yao, Atsushi; Sugimoto, Takaya; Odawara, Shunya; Fujisaki, Keisuke

    2018-05-01

    We report core loss properties of permanent magnet synchronous motors (PMSM) with amorphous magnetic materials (AMM) core under inverter and sinusoidal excitations. To discuss the core loss properties of AMM core, a comparison with non-oriented (NO) core is also performed. In addition, based on both experiments and numerical simulations, we estimate higher (time and space) harmonic components of the core losses under inverter and sinusoidal excitations. The core losses of PMSM are reduced by about 59% using AMM stator core instead of NO core under sinusoidal excitation. We show that the average decrease obtained by using AMM instead of NO in the stator core is about 94% in time harmonic components.

  2. Chemical modification of projectile residues and target material in a MEMIN cratering experiment

    NASA Astrophysics Data System (ADS)

    Ebert, Matthias; Hecht, Lutz; Deutsch, Alexander; Kenkmann, Thomas

    2013-01-01

    In the context of the MEMIN project, a hypervelocity cratering experiment has been performed using a sphere of the iron meteorite Campo del Cielo as projectile accelerated to 4.56 km s-1, and a block of Seeberger sandstone as target material. The ejecta, collected in a newly designed catcher, are represented by (1) weakly deformed, (2) highly deformed, and (3) highly shocked material. The latter shows shock-metamorphic features such as planar deformation features (PDF) in quartz, formation of diaplectic quartz glass, partial melting of the sandstone, and partially molten projectile, mixed mechanically and chemically with target melt. During mixing of projectile and target melts, the Fe of the projectile is preferentially partitioned into target melt to a greater degree than Ni and Co yielding a Fe/Ni that is generally higher than Fe/Ni in the projectile. This fractionation results from the differing siderophile properties, specifically from differences in reactivity of Fe, Ni, and Co with oxygen during projectile-target interaction. Projectile matter was also detected in shocked quartz grains. The average Fe/Ni of quartz with PDF (about 20) and of silica glasses (about 24) are in contrast to the average sandstone ratio (about 422), but resembles the Fe/Ni-ratio of the projectile (about 14). We briefly discuss possible reasons of projectile melting and vaporization in the experiment, in which the calculated maximum shock pressure does not exceed 55 GPa.

  3. Reliability and Validity of Kinetic and Kinematic Parameters Determined With Force Plates Embedded Under a Soil-Filled Baseball Mound.

    PubMed

    Yanai, Toshimasa; Matsuo, Akifumi; Maeda, Akira; Nakamoto, Hiroki; Mizutani, Mirai; Kanehisa, Hiroaki; Fukunaga, Tetsuo

    2017-08-01

    We developed a force measurement system in a soil-filled mound for measuring ground reaction forces (GRFs) acting on baseball pitchers and examined the reliability and validity of kinetic and kinematic parameters determined from the GRFs. Three soil-filled trays of dimensions that satisfied the official baseball rules were fixed onto 3 force platforms. Eight collegiate pitchers wearing baseball shoes with metal cleats were asked to throw 5 fastballs with maximum effort from the mound toward a catcher. The reliability of each parameter was determined for each subject as the coefficient of variation across the 5 pitches. The validity of the measurements was tested by comparing the outcomes either with the true values or the corresponding values computed from a motion capture system. The coefficients of variation in the repeated measurements of the peak forces ranged from 0.00 to 0.17, and were smaller for the pivot foot than the stride foot. The mean absolute errors in the impulses determined over the entire duration of pitching motion were 5.3 N˙s, 1.9 N˙s, and 8.2 N˙s for the X-, Y-, and Z-directions, respectively. These results suggest that the present method is reliable and valid for determining selected kinetic and kinematic parameters for analyzing pitching performance.

  4. NASA Tech Briefs, June 2003

    NASA Technical Reports Server (NTRS)

    2003-01-01

    Topics covered include: Nulling Infrared Radiometer for Measuring Temperature; The Ames Power Monitoring System; Hot Films on Ceramic Substrates for Measuring Skin Friction; Probe Without Moving Parts Measures Flow Angle; Detecting Conductive Liquid Leaking from Nonconductive Pipe; Adaptive Suppression of Noise in Voice Communications; High-Performance Solid-State W-Band Power Amplifiers; Microbatteries for Combinatorial Studies of Conventional Lithium-Ion Batteries; Correcting for Beam Aberrations in a Beam-Waveguide Antenna; Advanced Rainbow Solar Photovoltaic Arrays; Metal Side Reflectors for Trapping Light in QWIPs; Software for Collaborative Engineering of Launch Rockets; Software Assists in Extensive Environmental Auditing; Software Supports Distributed Operations via the Internet; Software Estimates Costs of Testing Rocket Engines; yourSky: Custom Sky-Image Mosaics via the Internet; Software for Managing Inventory of Flight Hardware; Lower-Conductivity Thermal-Barrier Coatings; Process for Smoothing an Si Substrate after Etching of SiO2; Flexible Composite-Material Pressure Vessel; Treatment to Destroy Chlorohydrocarbon Liquids in the Ground; Noncircular Cross Sections Could Enhance Mixing in Sprays; Small, Untethered, Mobile Roots for Inspecting Gas Pipes; Paint-Overspray Catcher; Preparation of Regular Specimens for Atom Probes; Inverse Tomo-Lithography for Making Microscopic 3D Parts; Predicting and Preventing Incipient Flameout in Combustors; MEMS-Based Piezoelectric/Electrostatic Inchworm Actuator; Metallized Capillaries as Probes for Raman Spectroscopy; Adaptation of Mesoscale Weather Models to Local Forecasting; Aerodynamic Design using Neural Networks; Combining Multiple Gyroscope Outputs for Increased Accuracy; and Improved Collision-Detection Method for Robotic Manipulator.

  5. The Key Role of Eyewitnesses in Rapid Impact Assessment of Global Earthquake

    NASA Astrophysics Data System (ADS)

    Bossu, R.; Steed, R.; Mazet-Roux, G.; Roussel, F.; Etivant, C.; Frobert, L.; Godey, S.

    2014-12-01

    Uncertainties in rapid impact assessments of global earthquakes are intrinsically large because they rely on 3 main elements (ground motion prediction models, building stock inventory and related vulnerability) which values and/or spatial variations are poorly constrained. Furthermore, variations of hypocentral location and magnitude within their respective uncertainty domain can lead to significantly different shaking level for centers of population and change the scope of the disaster. We present the strategy and methods implemented at the Euro-Med Seismological Centre (EMSC) to rapidly collect in-situ observations on earthquake effects from eyewitnesses for reducing uncertainties of rapid earthquake impact assessment. It comprises crowdsourced information (online questionnaires, pics) as well as information derived from real time analysis of web traffic (flashourcing technique), and more recently deployment of QCN (Quake Catcher Network) low cost sensors. We underline the importance of merging results of different methods to improve performances and reliability of collected data.We try to better understand and respond to public demands and expectations after earthquakes through improved information services and diversification of information tools (social networks, smartphone app., browsers adds-on…), which, in turn, drive more eyewitnesses to our services and improve data collection. We will notably present our LastQuake Twitter feed (Quakebot) and smartphone applications (IOs and android) which only report earthquakes that matter for the public and authorities, i.e. felt and damaging earthquakes identified thanks to citizen generated information.

  6. A core competency-based objective structured clinical examination (OSCE) can predict future resident performance.

    PubMed

    Wallenstein, Joshua; Heron, Sheryl; Santen, Sally; Shayne, Philip; Ander, Douglas

    2010-10-01

    This study evaluated the ability of an objective structured clinical examination (OSCE) administered in the first month of residency to predict future resident performance in the Accreditation Council for Graduate Medical Education (ACGME) core competencies. Eighteen Postgraduate Year 1 (PGY-1) residents completed a five-station OSCE in the first month of postgraduate training. Performance was graded in each of the ACGME core competencies. At the end of 18 months of training, faculty evaluations of resident performance in the emergency department (ED) were used to calculate a cumulative clinical evaluation score for each core competency. The correlations between OSCE scores and clinical evaluation scores at 18 months were assessed on an overall level and in each core competency. There was a statistically significant correlation between overall OSCE scores and overall clinical evaluation scores (R = 0.48, p < 0.05) and in the individual competencies of patient care (R = 0.49, p < 0.05), medical knowledge (R = 0.59, p < 0.05), and practice-based learning (R = 0.49, p < 0.05). No correlation was noted in the systems-based practice, interpersonal and communication skills, or professionalism competencies. An early-residency OSCE has the ability to predict future postgraduate performance on a global level and in specific core competencies. Used appropriately, such information can be a valuable tool for program directors in monitoring residents' progress and providing more tailored guidance. © 2010 by the Society for Academic Emergency Medicine.

  7. Accelerating moderately stiff chemical kinetics in reactive-flow simulations using GPUs

    NASA Astrophysics Data System (ADS)

    Niemeyer, Kyle E.; Sung, Chih-Jen

    2014-01-01

    The chemical kinetics ODEs arising from operator-split reactive-flow simulations were solved on GPUs using explicit integration algorithms. Nonstiff chemical kinetics of a hydrogen oxidation mechanism (9 species and 38 irreversible reactions) were computed using the explicit fifth-order Runge-Kutta-Cash-Karp method, and the GPU-accelerated version performed faster than single- and six-core CPU versions by factors of 126 and 25, respectively, for 524,288 ODEs. Moderately stiff kinetics, represented with mechanisms for hydrogen/carbon-monoxide (13 species and 54 irreversible reactions) and methane (53 species and 634 irreversible reactions) oxidation, were computed using the stabilized explicit second-order Runge-Kutta-Chebyshev (RKC) algorithm. The GPU-based RKC implementation demonstrated an increase in performance of nearly 59 and 10 times, for problem sizes consisting of 262,144 ODEs and larger, than the single- and six-core CPU-based RKC algorithms using the hydrogen/carbon-monoxide mechanism. With the methane mechanism, RKC-GPU performed more than 65 and 11 times faster, for problem sizes consisting of 131,072 ODEs and larger, than the single- and six-core RKC-CPU versions, and up to 57 times faster than the six-core CPU-based implicit VODE algorithm on 65,536 ODEs. In the presence of more severe stiffness, such as ethylene oxidation (111 species and 1566 irreversible reactions), RKC-GPU performed more than 17 times faster than RKC-CPU on six cores for 32,768 ODEs and larger, and at best 4.5 times faster than VODE on six CPU cores for 65,536 ODEs. With a larger time step size, RKC-GPU performed at best 2.5 times slower than six-core VODE for 8192 ODEs and larger. Therefore, the need for developing new strategies for integrating stiff chemistry on GPUs was discussed.

  8. Main steam-line break core shroud loading calculations for BWRs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shoop, U.; Feltus, M.A.; Baratta, A.J.

    1995-12-31

    In July 1994, the U.S. Nuclear regulatory Commission sent out Generic Letter 94-03 to all boiling water reactors in the United States, informing them of intergranular stress corrosion cracking of core shrouds found in 2 reactors. The letter directed all to perform safety analysis of the BWR units. Penn State performed scoping calculations to determine the forces experienced by the core shroud during a main-stream line break transient.

  9. An Empirical Determination of Tasks Essential to Successful Performance as a Bulk Fertilizer Plant Worker. Determination of a Common Core of Basic Skills in Agribusiness and Natural Resources.

    ERIC Educational Resources Information Center

    Miller, Daniel R.; And Others

    To improve vocational educational programs in agriculture, occupational information on a common core of basic skills within the occupational area of the bulk fertilizer plant worker is presented in the revised task inventory survey. The purpose of the occupational survey was to identify a common core of basic skills which are performed and are…

  10. An Empirical Determination of Tasks Essential to Successful Performance as an Animal Health Assistant. Determination of a Common Core of Basic Skills in Agribusiness and Natural Resources.

    ERIC Educational Resources Information Center

    Cooke, Fred C.; And Others

    To improve vocational educational programs in agriculture, occupational information on a common core of basic skills within the occupational area of the animal health assistant is presented in the revised task inventory survey. The purpose of the occupational survey was to identify a common core of basic skills which are performed and are…

  11. An Empirical Determination of Tasks Essential to Successful Performance as a Swine Farmer. Determination of a Common Core of Basic Skills in Agribusiness and Natural Resources.

    ERIC Educational Resources Information Center

    Byrd, J. Rick; And Others

    To improve vocational educational programs in agriculture, occupational information on a common core of basic skills within the occupational area of the swine farmer is presented in the revised task inventory survey. The purpose of the occupational survey was to identify a common core of basic skills which are performed and are essential for…

  12. An Empirical Determination of Tasks Essential to Successful Performance as a Tree Service Worker. Determination of a Common Core of Basic Skills in Agribusiness and Natural Resources.

    ERIC Educational Resources Information Center

    Waddy, Paul H.; And Others

    To improve vocational educational programs in agriculture, occupational information on a common core of basic skills within the occupational area of the tree service worker is presented in the revised task inventory survey. The purpose of the occupational survey was to identify a common core of basic skills which are performed and are essential…

  13. Exploring the Role of Agriculture Teachers in Core Academic Integration

    ERIC Educational Resources Information Center

    McKim, Aaron J.; Sorenson, Tyson J.; Velez, Jonathan J.

    2016-01-01

    Core academic skills are essential for success in our society. However, an abundance of research has identified a large proportion of secondary school students are under performing in core academic areas such as literacy and math. Researchers have suggested integrating core academic content throughout all secondary coursework as a potential…

  14. Nanostructured core-shell electrode materials for electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Jiang, Long-bo; Yuan, Xing-zhong; Liang, Jie; Zhang, Jin; Wang, Hou; Zeng, Guang-ming

    2016-11-01

    Core-shell nanostructure represents a unique system for applications in electrochemical energy storage devices. Owing to the unique characteristics featuring high power delivery and long-term cycling stability, electrochemical capacitors (ECs) have emerged as one of the most attractive electrochemical storage systems since they can complement or even replace batteries in the energy storage field, especially when high power delivery or uptake is needed. This review aims to summarize recent progress on core-shell nanostructures for advanced supercapacitor applications in view of their hierarchical architecture which not only create the desired hierarchical porous channels, but also possess higher electrical conductivity and better structural mechanical stability. The core-shell nanostructures include carbon/carbon, carbon/metal oxide, carbon/conducting polymer, metal oxide/metal oxide, metal oxide/conducting polymer, conducting polymer/conducting polymer, and even more complex ternary core-shell nanoparticles. The preparation strategies, electrochemical performances, and structural stabilities of core-shell materials for ECs are summarized. The relationship between core-shell nanostructure and electrochemical performance is discussed in detail. In addition, the challenges and new trends in core-shell nanomaterials development have also been proposed.

  15. Computational performance of a smoothed particle hydrodynamics simulation for shared-memory parallel computing

    NASA Astrophysics Data System (ADS)

    Nishiura, Daisuke; Furuichi, Mikito; Sakaguchi, Hide

    2015-09-01

    The computational performance of a smoothed particle hydrodynamics (SPH) simulation is investigated for three types of current shared-memory parallel computer devices: many integrated core (MIC) processors, graphics processing units (GPUs), and multi-core CPUs. We are especially interested in efficient shared-memory allocation methods for each chipset, because the efficient data access patterns differ between compute unified device architecture (CUDA) programming for GPUs and OpenMP programming for MIC processors and multi-core CPUs. We first introduce several parallel implementation techniques for the SPH code, and then examine these on our target computer architectures to determine the most effective algorithms for each processor unit. In addition, we evaluate the effective computing performance and power efficiency of the SPH simulation on each architecture, as these are critical metrics for overall performance in a multi-device environment. In our benchmark test, the GPU is found to produce the best arithmetic performance as a standalone device unit, and gives the most efficient power consumption. The multi-core CPU obtains the most effective computing performance. The computational speed of the MIC processor on Xeon Phi approached that of two Xeon CPUs. This indicates that using MICs is an attractive choice for existing SPH codes on multi-core CPUs parallelized by OpenMP, as it gains computational acceleration without the need for significant changes to the source code.

  16. Performance implications from sizing a VM on multi-core systems: A Data analytic application s view

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lim, Seung-Hwan; Horey, James L; Begoli, Edmon

    In this paper, we present a quantitative performance analysis of data analytics applications running on multi-core virtual machines. Such environments form the core of cloud computing. In addition, data analytics applications, such as Cassandra and Hadoop, are becoming increasingly popular on cloud computing platforms. This convergence necessitates a better understanding of the performance and cost implications of such hybrid systems. For example, the very rst step in hosting applications in virtualized environments, requires the user to con gure the number of virtual processors and the size of memory. To understand performance implications of this step, we benchmarked three Yahoo Cloudmore » Serving Benchmark (YCSB) workloads in a virtualized multi-core environment. Our measurements indicate that the performance of Cassandra for YCSB workloads does not heavily depend on the processing capacity of a system, while the size of the data set is critical to performance relative to allocated memory. We also identi ed a strong relationship between the running time of workloads and various hardware events (last level cache loads, misses, and CPU migrations). From this analysis, we provide several suggestions to improve the performance of data analytics applications running on cloud computing environments.« less

  17. TREAT Transient Analysis Benchmarking for the HEU Core

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kontogeorgakos, D. C.; Connaway, H. M.; Wright, A. E.

    2014-05-01

    This work was performed to support the feasibility study on the potential conversion of the Transient Reactor Test Facility (TREAT) at Idaho National Laboratory from the use of high enriched uranium (HEU) fuel to the use of low enriched uranium (LEU) fuel. The analyses were performed by the GTRI Reactor Conversion staff at the Argonne National Laboratory (ANL). The objective of this study was to benchmark the transient calculations against temperature-limited transients performed in the final operating HEU TREAT core configuration. The MCNP code was used to evaluate steady-state neutronics behavior, and the point kinetics code TREKIN was used tomore » determine core power and energy during transients. The first part of the benchmarking process was to calculate with MCNP all the neutronic parameters required by TREKIN to simulate the transients: the transient rod-bank worth, the prompt neutron generation lifetime, the temperature reactivity feedback as a function of total core energy, and the core-average temperature and peak temperature as a functions of total core energy. The results of these calculations were compared against measurements or against reported values as documented in the available TREAT reports. The heating of the fuel was simulated as an adiabatic process. The reported values were extracted from ANL reports, intra-laboratory memos and experiment logsheets and in some cases it was not clear if the values were based on measurements, on calculations or a combination of both. Therefore, it was decided to use the term “reported” values when referring to such data. The methods and results from the HEU core transient analyses will be used for the potential LEU core configurations to predict the converted (LEU) core’s performance.« less

  18. Method and apparatus for supercooling and solidifying substances

    NASA Technical Reports Server (NTRS)

    Lacy, L. L.; Robinson, M. B.; Rathz, T. J.; Katz, L.; Nisen, D. B. (Inventor)

    1983-01-01

    An enclosure provides a containerless environment in which a sample specimen is positioned. The specimen is heated in the containerless environment, and the specimen melt is dropped through the tube in which it cools by radiation. The tube is alternatively backfilled with an inert gas whereby the specimen melt cools by both radiation and convection during its free fall. During the free fall, the sample is in a containerless, low-gravity environment which enhances supercooling in the sample and prevents sedimentation and thermal convection influences. The sample continues to supercool until nucleation occurs which is detected by silicon photovoltaic detectors. The sample solidifies after nucleation and becomes completely solid before entering the detachable catcher. The amount of supercooling of the specimen can be measured by knowing the cooling ratio and determining the time for nucleation to occur.

  19. From Playroom to Lab: Tough Stretchable Electronics Analyzed with a Tabletop Tensile Tester Made from Toy‐Bricks

    PubMed Central

    Kettlgruber, Gerald; Siket, Christian M.; Drack, Michael; Graz, Ingrid M.; Cakmak, Umut; Major, Zoltan; Kaltenbrunner, Martin; Bauer, Siegfried

    2016-01-01

    Toy bricks are an ideal platform for the cost‐effective rapid prototyping of a tabletop tensile tester with measurement accuracy on par with expensive, commercially available laboratory equipment. Here, a tester is presented that is not only a versatile demonstration device in mechanics, electronics, and physics education and an eye‐catcher on exhibitions, but also a powerful tool for stretchable electronics research. Following the “open‐source movement” the build‐up of the tester is described and all the details for easy reproduction are disclosed. A a new design of highly conformable all‐elastomer based graded rigid island printed circuit boards is developed. Tough bonded to this elastomer substrate are imperceptible electronic foils bearing conductors and off‐the‐shelf microelectronics, paving the way for next generation smart electronic appliances. PMID:27588259

  20. Mechanical and photoelastic analysis of conventional screws and cannulated screws for sagittal split osteotomy fixation: a comparative study.

    PubMed

    Lima, Cristina Jardelino de; Falci, Saulo Gabriel Moreira; Rodrigues, Danillo Costa; Marchiori, Érica Cristina; Moreira, Roger Willian Fernandes

    2015-12-01

    The aim of the present study was to use mechanical and photoelastic tests to compare the performance of cannulated screws with solid-core screws in sagittal split osteotomy fixation. Ten polyurethane mandibles, with a prefabricated sagittal split ramus osteotomy, were fixed with an L inverted technique and allocated to each group as follows: cannulated screw group (CSG), fixed with three 2.3-cannulated screws; and solid-core screw group (SCSG), fixed with three 2.3-solid-core screws. Vertical linear loading tests were performed. The differences between mean values were analyzed through T test for independent samples. The photoelastic test was carried out using a polariscope. The results revealed differences between the two groups only at 1 mm of displacement, in which the cannulated-screw revealed more resistance. Photoelastic test showed higher stress concentration close to mandibular branch in the solid-core group. Cannulated screws performed better than solid-core ones in a mechanical test at 1-mm displacement and photoelastic tests.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top