Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Vermont

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Vermont. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Michigan. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Alabama. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of New Hampshire

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of New Hampshire. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of New Mexico. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Colorado. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Washington

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Washington. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Montana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Montana. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the District of Columbia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the District of Columbia. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Massachusetts. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Oregon. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Wisconsin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Wisconsin. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Ohio. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of South Carolina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of South Carolina. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of North Carolina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of North Carolina. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Iowa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong

2015-12-01

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Iowa. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less

Methodological considerations in cost of illness studies on Alzheimer disease

PubMed Central

2012-01-01

Cost-of-illness studies (COI) can identify and measure all the costs of a particular disease, including the direct, indirect and intangible dimensions. They are intended to provide estimates about the economic impact of costly disease. Alzheimer disease (AD) is a relevant example to review cost of illness studies because of its costliness.The aim of this study was to review relevant published cost studies of AD to analyze the method used and to identify which dimension had to be improved from a methodological perspective. First, we described the key points of cost study methodology. Secondly, cost studies relating to AD were systematically reviewed, focussing on an analysis of the different methods used. The methodological choices of the studies were analysed using an analytical grid which contains the main methodological items of COI studies. Seventeen articles were retained. Depending on the studies, annual total costs per patient vary from $2,935 to $52, 954. The methods, data sources, and estimated cost categories in each study varied widely. The review showed that cost studies adopted different approaches to estimate costs of AD, reflecting a lack of consensus on the methodology of cost studies. To increase its credibility, closer agreement among researchers on the methodological principles of cost studies would be desirable. PMID:22963680

Space system operations and support cost analysis using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.; Moore, Arlene A.; Fairbairn, Robert E.

1990-01-01

This paper evaluates the use of Markov chain process in probabilistic life cycle cost analysis and suggests further uses of the process as a design aid tool. A methodology is developed for estimating operations and support cost and expected life for reusable space transportation systems. Application of the methodology is demonstrated for the case of a hypothetical space transportation vehicle. A sensitivity analysis is carried out to explore the effects of uncertainty in key model inputs.

Analysis and methodology for aeronautical systems technology program planning

NASA Technical Reports Server (NTRS)

White, M. J.; Gershkoff, I.; Lamkin, S.

1983-01-01

A structured methodology was developed that allows the generation, analysis, and rank-ordering of system concepts by their benefits and costs, indicating the preferred order of implementation. The methodology is supported by a base of data on civil transport aircraft fleet growth projections and data on aircraft performance relating the contribution of each element of the aircraft to overall performance. The performance data are used to assess the benefits of proposed concepts. The methodology includes a computer program for performing the calculations needed to rank-order the concepts and compute their cumulative benefit-to-cost ratio. The use of the methodology and supporting data is illustrated through the analysis of actual system concepts from various sources.

Machine cost analysis using the traditional machine-rate method and ChargeOut!

Treesearch

E. M. (Ted) Bilek

2009-01-01

Forestry operations require ever more use of expensive capital equipment. Mechanization is frequently necessary to perform cost-effective and safe operations. Increased capital should mean more sophisticated capital costing methodologies. However the machine rate method, which is the costing methodology most frequently used, dates back to 1942. CHARGEOUT!, a recently...

Direct cost analysis of intensive care unit stay in four European countries: applying a standardized costing methodology.

PubMed

Tan, Siok Swan; Bakker, Jan; Hoogendoorn, Marga E; Kapila, Atul; Martin, Joerg; Pezzi, Angelo; Pittoni, Giovanni; Spronk, Peter E; Welte, Robert; Hakkaart-van Roijen, Leona

2012-01-01

The objective of the present study was to measure and compare the direct costs of intensive care unit (ICU) days at seven ICU departments in Germany, Italy, the Netherlands, and the United Kingdom by means of a standardized costing methodology. A retrospective cost analysis of ICU patients was performed from the hospital's perspective. The standardized costing methodology was developed on the basis of the availability of data at the seven ICU departments. It entailed the application of the bottom-up approach for "hotel and nutrition" and the top-down approach for "diagnostics," "consumables," and "labor." Direct costs per ICU day ranged from €1168 to €2025. Even though the distribution of costs varied by cost component, labor was the most important cost driver at all departments. The costs for "labor" amounted to €1629 at department G but were fairly similar at the other departments (€711 ± 115). Direct costs of ICU days vary widely between the seven departments. Our standardized costing methodology could serve as a valuable instrument to compare actual cost differences, such as those resulting from differences in patient case-mix. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

77 FR 30411 - Connect America Fund; High-Cost Universal Service Support

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... ``benchmarks'' for high cost loop support (HCLS). The methodology the Bureau adopts, builds on the analysis... to support continued broadband investment. The methodology the Bureau adopts today is described in... methodology, HCLS will be recalculated to account for the additional support available under the overall cap...

Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

DTIC Science & Technology

1981-02-01

Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

75 FR 39663 - Stainless Steel Bar From Brazil: Final Results of Antidumping Duty Administrative Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-12

... a post-preliminary analysis in which we altered the cost-of- production methodology from that which... scope of the order is dispositive. Alternative Cost Methodology In our Preliminary Results we relied on... Results, 75 FR at 12516), and we compared the home-market prices to POR costs for the cost-of-production...

Methodology for cost analysis of film-based and filmless portable chest systems

NASA Astrophysics Data System (ADS)

Melson, David L.; Gauvain, Karen M.; Beardslee, Brian M.; Kraitsik, Michael J.; Burton, Larry; Blaine, G. James; Brink, Gary S.

1996-05-01

Many studies analyzing the costs of film-based and filmless radiology have focused on multi- modality, hospital-wide solutions. Yet due to the enormous cost of converting an entire large radiology department or hospital to a filmless environment all at once, institutions often choose to eliminate film one area at a time. Narrowing the focus of cost-analysis may be useful in making such decisions. This presentation will outline a methodology for analyzing the cost per exam of film-based and filmless solutions for providing portable chest exams to Intensive Care Units (ICUs). The methodology, unlike most in the literature, is based on parallel data collection from existing filmless and film-based ICUs, and is currently being utilized at our institution. Direct costs, taken from the perspective of the hospital, for portable computed radiography chest exams in one filmless and two film-based ICUs are identified. The major cost components are labor, equipment, materials, and storage. Methods for gathering and analyzing each of the cost components are discussed, including FTE-based and time-based labor analysis, incorporation of equipment depreciation, lease, and maintenance costs, and estimation of materials costs. Extrapolation of data from three ICUs to model hypothetical, hospital-wide film-based and filmless ICU imaging systems is described. Performance of sensitivity analysis on the filmless model to assess the impact of anticipated reductions in specific labor, equipment, and archiving costs is detailed. A number of indirect costs, which are not explicitly included in the analysis, are identified and discussed.

Preliminary Multi-Variable Parametric Cost Model for Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Hendrichs, Todd

2010-01-01

This slide presentation reviews creating a preliminary multi-variable cost model for the contract costs of making a space telescope. There is discussion of the methodology for collecting the data, definition of the statistical analysis methodology, single variable model results, testing of historical models and an introduction of the multi variable models.

Cost-benefit analysis of space technology

NASA Technical Reports Server (NTRS)

Hein, G. F.; Stevenson, S. M.; Sivo, J. N.

1976-01-01

A discussion of the implications and problems associated with the use of cost-benefit techniques is presented. Knowledge of these problems is useful in the structure of a decision making process. A methodology of cost-benefit analysis is presented for the evaluation of space technology. The use of the methodology is demonstrated with an evaluation of ion thrusters for north-south stationkeeping aboard geosynchronous communication satellites. A critique of the concept of consumers surplus for measuring benefits is also presented.

Cost modeling to justify technology acquisitions.

PubMed

Vanden Brink, J; Gray, S

1997-06-01

In an era of diminishing resources, healthcare providers must justify new technology acquisitions. Cost modeling is one method of evaluating the financial impact a technology acquisition will have on a healthcare facility or integrated delivery system. This methodology requires careful data collection and a thorough analysis of both current costs and future cost savings resulting from the new technology. By using a cost modeling methodology, providers will be able to achieve competitive and economic advantages by analyzing both cost and value.

A review of costing methodologies in critical care studies.

PubMed

Pines, Jesse M; Fager, Samuel S; Milzman, David P

2002-09-01

Clinical decision making in critical care has traditionally been based on clinical outcome measures such as mortality and morbidity. Over the past few decades, however, increasing competition in the health care marketplace has made it necessary to consider costs when making clinical and managerial decisions in critical care. Sophisticated costing methodologies have been developed to aid this decision-making process. We performed a narrative review of published costing studies in critical care during the past 6 years. A total of 282 articles were found, of which 68 met our search criteria. They involved a mean of 508 patients (range, 20-13,907). A total of 92.6% of the studies (63 of 68) used traditional cost analysis, whereas the remaining 7.4% (5 of 68) used cost-effectiveness analysis. None (0 of 68) used cost-benefit analysis or cost-utility analysis. A total of 36.7% (25 of 68) used hospital charges as a surrogate for actual costs. Of the 43 articles that actually counted costs, 37.2% (16 of 43) counted physician costs, 27.9% (12 of 43) counted facility costs, 34.9% (15 of 43) counted nursing costs, 9.3% (4 of 43) counted societal costs, and 90.7% (39 of 43) counted laboratory, equipment, and pharmacy costs. Our conclusion is that despite considerable progress in costing methodologies, critical care studies have not adequately implemented these techniques. Given the importance of financial implications in medicine, it would be prudent for critical care studies to use these more advanced techniques. Copyright 2002, Elsevier Science (USA). All rights reserved.

A Subject Reference: Benefit-Cost Analysis of Toxic Substances, Hazardous Materials and Solid Waste Control (1977)

EPA Pesticide Factsheets

Discussion of methodological issues for conducting benefit-cost analysis and provides guidance for selecting and applying the most appropriate and useful mechanisms in benefit-cost analysis of toxic substances, hazardous materials, and solid waste control

Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

PubMed

Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

2015-09-15

This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

Coal gasification systems engineering and analysis. Appendix E: Cost estimation and economic evaluation methodology

NASA Technical Reports Server (NTRS)

1980-01-01

The cost estimation and economic evaluation methodologies presented are consistent with industry practice for assessing capital investment requirements and operating costs of coal conversion systems. All values stated are based on January, 1980 dollars with appropriate recognition of the time value of money. Evaluation of project economic feasibility can be considered a two step process (subject to considerable refinement). First, the costs of the project must be quantified and second, the price at which the product can be manufacturd must be determined. These two major categories are discussed. The summary of methodology is divided into five parts: (1) systems costs, (2)instant plant costs, (3) annual operating costs, (4) escalation and discounting process, and (5) product pricing.

Outline of cost-benefit analysis and a case study

NASA Technical Reports Server (NTRS)

Kellizy, A.

1978-01-01

The methodology of cost-benefit analysis is reviewed and a case study involving solar cell technology is presented. Emphasis is placed on simplifying the technique in order to permit a technical person not trained in economics to undertake a cost-benefit study comparing alternative approaches to a given problem. The role of economic analysis in management decision making is discussed. In simplifying the methodology it was necessary to restrict the scope and applicability of this report. Additional considerations and constraints are outlined. Examples are worked out to demonstrate the principles. A computer program which performs the computational aspects appears in the appendix.

Methodologies for Evaluating the Impact of Contraceptive Social Marketing Programs.

ERIC Educational Resources Information Center

Bertrand, Jane T.; And Others

1989-01-01

An overview of the evaluation issues associated with contraceptive social marketing programs is provided. Methodologies covered include survey techniques, cost-effectiveness analyses, retail audits of sales data, time series analysis, nested logit analysis, and discriminant analysis. (TJH)

Costing the satellite power system

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1978-01-01

The paper presents a methodology for satellite power system costing, places approximate limits on the accuracy possible in cost estimates made at this time, and outlines the use of probabilistic cost information in support of the decision-making process. Reasons for using probabilistic costing or risk analysis procedures instead of standard deterministic costing procedures are considered. Components of cost, costing estimating relationships, grass roots costing, and risk analysis are discussed. Risk analysis using a Monte Carlo simulation model is used to estimate future costs.

Conceptual and Preliminary Design of a Low-Cost Precision Aerial Delivery System

DTIC Science & Technology

2016-06-01

test results. It includes an analysis of the failure modes encountered during flight experimentation , methodology used for conducting coordinate...and experimentation . Additionally, the current and desired end state of the research is addressed. Finally, this chapter outlines the methodology ...preliminary design phases are utilized to investigate and develop a potentially low-cost alternative to existing systems. Using an Agile methodology

Analysis of National Solid Waste Recycling Programs and Development of Solid Waste Recycling Cost Functions: A Summary of the Literature (1999)

EPA Pesticide Factsheets

Discussion of methodological issues for conducting benefit-cost analysis and provides guidance for selecting and applying the most appropriate and useful mechanisms in benefit-cost analysis of toxic substances, hazardous materials, and solid waste control

The Application of Cost-Benefit Analysis in Manpower Area.

ERIC Educational Resources Information Center

Barsby, Steven L.

The relative efficiency of various manpower programs as seen through cost-benefit analysis is assessed, and the contribution that cost-benefit analysis has made in evaluating manpower programs is discussed, taking into account a variety of methodologies presented in different studies. Vocational rehabilitation appears to yield the highest…

Evaluation of the Field Test of Project Information Packages: Volume III--Resource Cost Analysis.

ERIC Educational Resources Information Center

Al-Salam, Nabeel; And Others

The third of three volumes evaluating the first year field test of the Project Information Packages (PIPs) provides a cost analysis study as a key element in the total evaluation. The resource approach to cost analysis is explained and the specific resource methodology used in the main cost analysis of the 19 PIP field-test projects detailed. The…

General methodology: Costing, budgeting, and techniques for benefit-cost and cost-effectiveness analysis

NASA Technical Reports Server (NTRS)

Stretchberry, D. M.; Hein, G. F.

1972-01-01

The general concepts of costing, budgeting, and benefit-cost ratio and cost-effectiveness analysis are discussed. The three common methods of costing are presented. Budgeting distributions are discussed. The use of discounting procedures is outlined. The benefit-cost ratio and cost-effectiveness analysis is defined and their current application to NASA planning is pointed out. Specific practices and techniques are discussed, and actual costing and budgeting procedures are outlined. The recommended method of calculating benefit-cost ratios is described. A standardized method of cost-effectiveness analysis and long-range planning are also discussed.

Systems cost/performance analysis (study 2.3). Volume 2: Systems cost/performance model. [unmanned automated payload programs and program planning

NASA Technical Reports Server (NTRS)

Campbell, B. H.

1974-01-01

A methodology which was developed for balanced designing of spacecraft subsystems and interrelates cost, performance, safety, and schedule considerations was refined. The methodology consists of a two-step process: the first step is one of selecting all hardware designs which satisfy the given performance and safety requirements, the second step is one of estimating the cost and schedule required to design, build, and operate each spacecraft design. Using this methodology to develop a systems cost/performance model allows the user of such a model to establish specific designs and the related costs and schedule. The user is able to determine the sensitivity of design, costs, and schedules to changes in requirements. The resulting systems cost performance model is described and implemented as a digital computer program.

Life Cycle Cost Analysis of Portland Cement Concrete Pavements

DOT National Transportation Integrated Search

1999-09-01

This report describes the development of a new life cycle cost analysis methodology for Portland cement concrete pavements - one that considers all aspects of pavement design, construction, maintenance, and user impacts throughout the analysis period...

The space station assembly phase: Flight telerobotic servicer feasibility. Volume 2: Methodology and case study

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Gyamfi, Max A.; Volkmer, Kent; Zimmerman, Wayne F.

1987-01-01

A methodology is described for examining the feasibility of a Flight Telerobotic Servicer (FTS) using two assembly scenarios, defined at the EVA task level, for the 30 shuttle flights (beginning with MB-1) over a four-year period. Performing all EVA tasks by crew only is compared to a scenario in which crew EVA is augmented by FTS. A reference FTS concept is used as a technology baseline and life-cycle cost analysis is performed to highlight cost tradeoffs. The methodology, procedure, and data used to complete the analysis are documented in detail.

Cost-Effectiveness Analysis of the Automation of a Circulation System.

ERIC Educational Resources Information Center

Mosley, Isobel

A general methodology for cost effectiveness analysis was developed and applied to the Colorado State University library loan desk. The cost effectiveness of the existing semi-automated circulation system was compared with that of a fully manual one, based on the existing manual subsystem. Faculty users' time and computer operating costs were…

Analysis and Evaluation of Processes and Equipment in Tasks 2 and 4 of the Low-cost Solar Array Project

NASA Technical Reports Server (NTRS)

Wolf, M.

1979-01-01

To facilitate the task of objectively comparing competing process options, a methodology was needed for the quantitative evaluation of their relative cost effectiveness. Such a methodology was developed and is described, together with three examples for its application. The criterion for the evaluation is the cost of the energy produced by the system. The method permits the evaluation of competing design options for subsystems, based on the differences in cost and efficiency of the subsystems, assuming comparable reliability and service life, or of competing manufacturing process options for such subsystems, which include solar cells or modules. This process option analysis is based on differences in cost, yield, and conversion efficiency contribution of the process steps considered.

Cost-Utility Analysis: Current Methodological Issues and Future Perspectives

PubMed Central

Nuijten, Mark J. C.; Dubois, Dominique J.

2011-01-01

The use of cost–effectiveness as final criterion in the reimbursement process for listing of new pharmaceuticals can be questioned from a scientific and policy point of view. There is a lack of consensus on main methodological issues and consequently we may question the appropriateness of the use of cost–effectiveness data in health care decision-making. Another concern is the appropriateness of the selection and use of an incremental cost–effectiveness threshold (Cost/QALY). In this review, we focus mainly on only some key methodological concerns relating to discounting, the utility concept, cost assessment, and modeling methodologies. Finally we will consider the relevance of some other important decision criteria, like social values and equity. PMID:21713127

Need for Cost Optimization of Space Life Support Systems

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Anderson, Grant

2017-01-01

As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

Strategic Analysis Overview

NASA Technical Reports Server (NTRS)

Cirillo, William M.; Earle, Kevin D.; Goodliff, Kandyce E.; Reeves, J. D.; Stromgren, Chel; Andraschko, Mark R.; Merrill, R. Gabe

2008-01-01

NASA s Constellation Program employs a strategic analysis methodology in providing an integrated analysis capability of Lunar exploration scenarios and to support strategic decision-making regarding those scenarios. The strategic analysis methodology integrates the assessment of the major contributors to strategic objective satisfaction performance, affordability, and risk and captures the linkages and feedbacks between all three components. Strategic analysis supports strategic decision making by senior management through comparable analysis of alternative strategies, provision of a consistent set of high level value metrics, and the enabling of cost-benefit analysis. The tools developed to implement the strategic analysis methodology are not element design and sizing tools. Rather, these models evaluate strategic performance using predefined elements, imported into a library from expert-driven design/sizing tools or expert analysis. Specific components of the strategic analysis tool set include scenario definition, requirements generation, mission manifesting, scenario lifecycle costing, crew time analysis, objective satisfaction benefit, risk analysis, and probabilistic evaluation. Results from all components of strategic analysis are evaluated a set of pre-defined figures of merit (FOMs). These FOMs capture the high-level strategic characteristics of all scenarios and facilitate direct comparison of options. The strategic analysis methodology that is described in this paper has previously been applied to the Space Shuttle and International Space Station Programs and is now being used to support the development of the baseline Constellation Program lunar architecture. This paper will present an overview of the strategic analysis methodology and will present sample results from the application of the strategic analysis methodology to the Constellation Program lunar architecture.

A cost evaluation methodology for surgical technologies.

PubMed

Ismail, Imad; Wolff, Sandrine; Gronfier, Agnes; Mutter, Didier; Swanström, Lee L; Swantröm, Lee L

2015-08-01

To create and validate a micro-costing methodology that surgeons and hospital administrators can use to evaluate the cost of implementing innovative surgical technologies. Our analysis is broken down into several elements of fixed and variable costs which are used to effectively and easily calculate the cost of surgical operations. As an example of application, we use data from 86 robot assisted gastric bypass operations made in our hospital. To validate our methodology, we discuss the cost reporting approaches used in 16 surgical publications with respect to 7 predefined criteria. Four formulas are created which allow users to import data from their health system or particular situation and derive the total cost. We have established that the robotic surgical system represents 97.53 % of our operating room's medical device costs which amounts to $4320.11. With a mean surgery time of 303 min, personnel cost per operation amounts to $1244.73, whereas reusable instruments and disposable costs are, respectively, $1539.69 and $3629.55 per case. The literature survey demonstrates that the cost of surgery is rarely reported or emphasized, and authors who do cover this concept do so with variable methodologies which make their findings difficult to interpret. Using a micro-costing methodology, it is possible to identify the cost of any new surgical procedure/technology using formulas that can be adapted to a variety of operations and healthcare systems. We hope that this paper will provide guidance for decision makers and a means for surgeons to harmonise cost reporting in the literature.

Estimating the Medical Care Costs of Obesity in the United States: Systematic Review, Meta-Analysis, and Empirical Analysis.

PubMed

Kim, David D; Basu, Anirban

2016-01-01

The prevalence of adult obesity exceeds 30% in the United States, posing a significant public health concern as well as a substantial financial burden. Although the impact of obesity on medical spending is undeniably significant, the estimated magnitude of the cost of obesity has varied considerably, perhaps driven by different study methodologies. To document variations in study design and methodology in existing literature and to understand the impact of those variations on the estimated costs of obesity. We conducted a systematic review of the twelve recently published articles that reported costs of obesity and performed a meta-analysis to generate a pooled estimate across those studies. Also, we performed an original analysis to understand the impact of different age groups, statistical models, and confounder adjustment on the magnitude of estimated costs using the nationally representative Medical Expenditure Panel Surveys from 2008-2010. We found significant variations among cost estimates in the existing literature. The meta-analysis found that the annual medical spending attributable to an obese individual was $1901 ($1239-$2582) in 2014 USD, accounting for $149.4 billion at the national level. The two most significant drivers of variability in the cost estimates were age groups and adjustment for obesity-related comorbid conditions. It would be important to acknowledge variations in the magnitude of the medical cost of obesity driven by different study design and methodology. Researchers and policy-makers need to be cautious on determining appropriate cost estimates according to their scientific and political questions. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Is law enforcement of drug-impaired driving cost-efficient? An explorative study of a methodology for cost-benefit analysis.

PubMed

Veisten, Knut; Houwing, Sjoerd; Mathijssen, M P M René; Akhtar, Juned

2013-03-01

Road users driving under the influence of psychoactive substances may be at much higher relative risk (RR) in road traffic than the average driver. Legislation banning blood alcohol concentrations above certain threshold levels combined with roadside breath-testing of alcohol have been in lieu for decades in many countries, but new legislation and testing of drivers for drug use have recently been implemented in some countries. In this article we present a methodology for cost-benefit analysis (CBA) of increased law enforcement of roadside drug screening. This is an analysis of the profitability for society, where costs of control are weighed against the reduction in injuries expected from fewer drugged drivers on the roads. We specify assumptions regarding costs and the effect of the specificity of the drug screening device, and quantify a deterrence effect related to sensitivity of the device yielding the benefit estimates. Three European countries with different current enforcement levels were studied, yielding benefit-cost ratios in the approximate range of 0.5-5 for a tripling of current levels of enforcement, with costs of about 4000 EUR per convicted and in the range of 1.5 and 13 million EUR per prevented fatality. The applied methodology for CBA has involved a simplistic behavioural response to enforcement increase and control efficiency. Although this methodology should be developed further, it is clearly indicated that the cost-efficiency of increased law enforcement of drug driving offences is dependent on the baseline situation of drug-use in traffic and on the current level of enforcement, as well as the RR and prevalence of drugs in road traffic. Copyright © 2012 Elsevier B.V. All rights reserved.

Cost-benefit analysis in occupational health: a comparison of intervention scenarios for occupational asthma and rhinitis among bakery workers.

PubMed

Meijster, Tim; van Duuren-Stuurman, Birgit; Heederik, Dick; Houba, Remko; Koningsveld, Ernst; Warren, Nicholas; Tielemans, Erik

2011-10-01

Use of cost-benefit analysis in occupational health increases insight into the intervention strategy that maximises the cost-benefit ratio. This study presents a methodological framework identifying the most important elements of a cost-benefit analysis for occupational health settings. One of the main aims of the methodology is to evaluate cost-benefit ratios for different stakeholders (employers, employees and society). The developed methodology was applied to two intervention strategies focused on reducing respiratory diseases. A cost-benefit framework was developed and used to set up a calculation spreadsheet containing the inputs and algorithms required to calculate the costs and benefits for all cost elements. Inputs from a large variety of sources were used to calculate total costs, total benefits, net costs and the benefit-to-costs ratio for both intervention scenarios. Implementation of a covenant intervention program resulted in a net benefit of €16 848 546 over 20 years for a population of 10 000 workers. Implementation was cost-effective for all stakeholders. For a health surveillance scenario, total benefits resulting from a decreased disease burden were estimated to be €44 659 352. The costs of the interventions could not be calculated. This study provides important insights for developing effective intervention strategies in the field of occupational medicine. Use of a model based approach enables investigation of those parameters most likely to impact on the effectiveness and costs of interventions for work related diseases. Our case study highlights the importance of considering different perspectives (of employers, society and employees) in assessing and sharing the costs and benefits of interventions.

Costs and cost-effectiveness of periviable care.

PubMed

Caughey, Aaron B; Burchfield, David J

2014-02-01

With increasing concerns regarding rapidly expanding healthcare costs, cost-effectiveness analysis allows assessment of whether marginal gains from new technology are worth the increased costs. Particular methodologic issues related to cost and cost-effectiveness analysis in the area of neonatal and periviable care include how costs are estimated, such as the use of charges and whether long-term costs are included; the challenges of measuring utilities; and whether to use a maternal, neonatal, or dual perspective in such analyses. A number of studies over the past three decades have examined the costs and the cost-effectiveness of neonatal and periviable care. Broadly, while neonatal care is costly, it is also cost effective as it produces both life-years and quality-adjusted life-years (QALYs). However, as the gestational age of the neonate decreases, the costs increase and the cost-effectiveness threshold is harder to achieve. In the periviable range of gestational age (22-24 weeks of gestation), whether the care is cost effective is questionable and is dependent on the perspective. Understanding the methodology and salient issues of cost-effectiveness analysis is critical for researchers, editors, and clinicians to accurately interpret results of the growing body of cost-effectiveness studies related to the care of periviable pregnancies and neonates. Copyright © 2014 Elsevier Inc. All rights reserved.

Cost-effectiveness methodology for computer systems selection

NASA Technical Reports Server (NTRS)

Vallone, A.; Bajaj, K. S.

1980-01-01

A new approach to the problem of selecting a computer system design has been developed. The purpose of this methodology is to identify a system design that is capable of fulfilling system objectives in the most economical way. The methodology characterizes each system design by the cost of the system life cycle and by the system's effectiveness in reaching objectives. Cost is measured by a 'system cost index' derived from an analysis of all expenditures and possible revenues over the system life cycle. Effectiveness is measured by a 'system utility index' obtained by combining the impact that each selection factor has on the system objectives and it is assessed through a 'utility curve'. A preestablished algorithm combines cost and utility and provides a ranking of the alternative system designs from which the 'best' design is selected.

A Life Cycle Cost Analysis of Rigid Pavements

DOT National Transportation Integrated Search

1999-09-01

The Texas Department of Transportation (TxDOT)commissioned a research project in 1996, summarized here, to promote life cycle cost analysis of rigid pavements throughout the TxDOT districts by developing a uniform methodology for performing life cycl...

Measuring the costs of outreach motivational interviewing for smoking cessation and relapse prevention among low-income pregnant women

PubMed Central

Ruger, Jennifer Prah; Emmons, Karen M; Kearney, Margaret H; Weinstein, Milton C

2009-01-01

Background Economic theory provides the philosophical foundation for valuing costs in judging medical and public health interventions. When evaluating smoking cessation interventions, accurate data on costs are essential for understanding resource consumption. Smoking cessation interventions, for which prior data on resource costs are typically not available, present special challenges. We develop a micro-costing methodology for estimating the real resource costs of outreach motivational interviewing (MI) for smoking cessation and relapse prevention among low-income pregnant women and report results from a randomized controlled trial (RCT) employing the methodology. Methodological standards in cost analysis are necessary for comparison and uniformity in analysis across interventions. Estimating the costs of outreach programs is critical for understanding the economics of reaching underserved and hard-to-reach populations. Methods Randomized controlled trial (1997-2000) collecting primary cost data for intervention. A sample of 302 low-income pregnant women was recruited from multiple obstetrical sites in the Boston metropolitan area. MI delivered by outreach health nurses vs. usual care (UC), with economic costs as the main outcome measures. Results The total cost of the MI intervention for 156 participants was $48,672 or $312 per participant. The total cost of $311.8 per participant for the MI intervention compared with a cost of $4.82 per participant for usual care, a difference of $307 ([CI], $289.2 to $322.8). The total fixed costs of the MI were $3,930 and the total variable costs of the MI were $44,710. The total expected program costs for delivering MI to 500 participants would be 147,430, assuming no economies of scale in program delivery. The main cost components of outreach MI were intervention delivery, travel time, scheduling, and training. Conclusion Grounded in economic theory, this methodology systematically identifies and measures resource utilization, using a process tracking system and calculates both component-specific and total costs of outreach MI. The methodology could help improve collection of accurate data on costs and estimates of the real resource costs of interventions alongside clinical trials and improve the validity and reliability of estimates of resource costs for interventions targeted at underserved and hard-to-reach populations. PMID:19775455

Public and Private School Costs. A Local Analysis, 1994.

ERIC Educational Resources Information Center

Public Policy Forum, Inc., Milwaukee, WI.

This document presents findings of a study that identified key factors of cost-per-pupil differences between public and private school spending among selected Milwaukee area public and private schools. The analysis was limited to cost factors only, specifically, to per-pupil spending. Methodology included a review of the school budgets of 7 public…

Using discrete choice experiments within a cost-benefit analysis framework: some considerations.

PubMed

McIntosh, Emma

2006-01-01

A great advantage of the stated preference discrete choice experiment (SPDCE) approach to economic evaluation methodology is its immense flexibility within applied cost-benefit analyses (CBAs). However, while the use of SPDCEs in healthcare has increased markedly in recent years there has been a distinct lack of equivalent CBAs in healthcare using such SPDCE-derived valuations. This article outlines specific issues and some practical suggestions for consideration relevant to the development of CBAs using SPDCE-derived benefits. The article shows that SPDCE-derived CBA can adopt recent developments in cost-effectiveness methodology including the cost-effectiveness plane, appropriate consideration of uncertainty, the net-benefit framework and probabilistic sensitivity analysis methods, while maintaining the theoretical advantage of the SPDCE approach. The concept of a cost-benefit plane is no different in principle to the cost-effectiveness plane and can be a useful tool for reporting and presenting the results of CBAs.However, there are many challenging issues to address for the advancement of CBA methodology using SPCDEs within healthcare. Particular areas for development include the importance of accounting for uncertainty in SPDCE-derived willingness-to-pay values, the methodology of SPDCEs in clinical trial settings and economic models, measurement issues pertinent to using SPDCEs specifically in healthcare, and the importance of issues such as consideration of the dynamic nature of healthcare and the resulting impact this has on the validity of attribute definitions and context.

Joint protection and hand exercises for hand osteoarthritis: an economic evaluation comparing methods for the analysis of factorial trials

PubMed Central

Oppong, Raymond; Nicholls, Elaine; Whitehurst, David G. T.; Hill, Susan; Hammond, Alison; Hay, Elaine M.; Dziedzic, Krysia

2015-01-01

Objectives. Evidence regarding the cost-effectiveness of joint protection and hand exercises for the management of hand OA is not well established. The primary aim of this study is to assess the cost-effectiveness (cost-utility) of these management options. In addition, given the absence of consensus regarding the conduct of economic evaluation alongside factorial trials, we compare different analytical methodologies. Methods. A trial-based economic evaluation to assess the cost-utility of joint protection only, hand exercises only and joint protection plus hand exercises compared with leaflet and advice was undertaken over a 12 month period from a UK National Health Service perspective. Patient-level mean costs and mean quality-adjusted life years (QALYs) were calculated for each trial arm. Incremental cost-effectiveness ratios (ICERs) were estimated and cost-effectiveness acceptability curves were constructed. The base case analysis used a within-the-table analysis methodology. Two further methods were explored: the at-the-margins approach and a regression-based approach with or without an interaction term. Results. Mean costs (QALYs) were £58.46 (s.d. 0.662) for leaflet and advice, £92.12 (s.d. 0.659) for joint protection, £64.51 (s.d. 0.681) for hand exercises and £112.38 (s.d. 0.658) for joint protection plus hand exercises. In the base case, hand exercises were the cost-effective option, with an ICER of £318 per QALY gained. Hand exercises remained the most cost-effective management strategy when adopting alternative methodological approaches. Conclusion. This is the first trial evaluating the cost-effectiveness of occupational therapy-supported approaches to self-management for hand OA. Our findings showed that hand exercises were the most cost-effective option. PMID:25339642

ChargeOut! : discounted cash flow compared with traditional machine-rate analysis

Treesearch

Ted Bilek

2008-01-01

ChargeOut!, a discounted cash-flow methodology in spreadsheet format for analyzing machine costs, is compared with traditional machine-rate methodologies. Four machine-rate models are compared and a common data set representative of logging skidders’ costs is used to illustrate the differences between ChargeOut! and the machine-rate methods. The study found that the...

Cost comparisons and methodological heterogeneity in cost-of-illness studies: the example of colorectal cancer.

PubMed

Ó Céilleachair, Alan J; Hanly, Paul; Skally, Máiréad; O'Neill, Ciaran; Fitzpatrick, Patricia; Kapur, Kanika; Staines, Anthony; Sharp, Linda

2013-04-01

Colorectal cancer (CRC) is the third most common cancer worldwide with over 1 million new cases diagnosed each year. Advances in treatment and survival are likely to have increased lifetime costs of managing the disease. Cost-of-illness (COI) studies are key building blocks in economic evaluations of interventions and comparative effectiveness research. We systematically reviewed and critiqued the COI literature on CRC. We searched several databases for CRC COI studies published in English, between January 2000 and February 2011. Information was abstracted on: setting, patient population, top-down/bottom-up costing, incident/prevalent approach, payer perspective, time horizon, costs included, cost source, and per-person costs. We developed a framework to compare study methodologies and assess homogeneity/heterogeneity. A total of 26 papers met the inclusion criteria. There was extensive methodological heterogeneity. Studies included case-control studies based on claims/reimbursement data (10), examinations of patient charts (5), and analysis of claims data (4). Epidemiological approaches varied (prevalent, 6; incident, 8; mixed, 10; unclear, 4). Time horizons ranged from 1 year postdiagnosis to lifetime. Seventeen studies used top-down costing. Twenty-five studies included healthcare-payer direct medical costs; 2 included indirect costs; 1 considered patient costs. There was broad agreement in how studies accounted for time, but few studies described costs in sufficient detail to allow replication. In general, costs were not comparable between studies. Methodological heterogeneity and lack of transparency made it almost impossible to compare CRC costs between studies or over time. For COI studies to be more useful and robust there is need for clear and rigorous guidelines around methodological and reporting "best practice."

Guiding the Development and Use of Cost-Effectiveness Analysis in Education

ERIC Educational Resources Information Center

Levin, Henry M.; Belfield, Clive

2015-01-01

Cost-effectiveness analysis is rarely used in education. When it is used, it often fails to meet methodological standards, especially with regard to cost measurement. Although there are occasional criticisms of these failings, we believe that it is useful to provide a listing of the more common concerns and how they might be addressed. Based upon…

The relationship between return on investment and quality of study methodology in workplace health promotion programs.

PubMed

Baxter, Siyan; Sanderson, Kristy; Venn, Alison J; Blizzard, C Leigh; Palmer, Andrew J

2014-01-01

To determine the relationship between return on investment (ROI) and quality of study methodology in workplace health promotion programs. Data were obtained through a systematic literature search of National Health Service Economic Evaluation Database (NHS EED), Database of Abstracts of Reviews of Effects (DARE), Health Technology Database (HTA), Cost Effectiveness Analysis (CEA) Registry, EconLit, PubMed, Embase, Wiley, and Scopus. Included were articles written in English or German reporting cost(s) and benefit(s) and single or multicomponent health promotion programs on working adults. Return-to-work and workplace injury prevention studies were excluded. Methodological quality was graded using British Medical Journal Economic Evaluation Working Party checklist. Economic outcomes were presented as ROI. ROI was calculated as ROI = (benefits - costs of program)/costs of program. Results were weighted by study size and combined using meta-analysis techniques. Sensitivity analysis was performed using two additional methodological quality checklists. The influences of quality score and important study characteristics on ROI were explored. Fifty-one studies (61 intervention arms) published between 1984 and 2012 included 261,901 participants and 122,242 controls from nine industry types across 12 countries. Methodological quality scores were highly correlated between checklists (r = .84-.93). Methodological quality improved over time. Overall weighted ROI [mean ± standard deviation (confidence interval)] was 1.38 ± 1.97 (1.38-1.39), which indicated a 138% return on investment. When accounting for methodological quality, an inverse relationship to ROI was found. High-quality studies (n = 18) had a smaller mean ROI, 0.26 ± 1.74 (.23-.30), compared to moderate (n = 16) 0.90 ± 1.25 (.90-.91) and low-quality (n = 27) 2.32 ± 2.14 (2.30-2.33) studies. Randomized control trials (RCTs) (n = 12) exhibited negative ROI, -0.22 ± 2.41(-.27 to -.16). Financial returns become increasingly positive across quasi-experimental, nonexperimental, and modeled studies: 1.12 ± 2.16 (1.11-1.14), 1.61 ± 0.91 (1.56-1.65), and 2.05 ± 0.88 (2.04-2.06), respectively. Overall, mean weighted ROI in workplace health promotion demonstrated a positive ROI. Higher methodological quality studies provided evidence of smaller financial returns. Methodological quality and study design are important determinants.

Systematic review and quality assessment of cost-effectiveness analysis of pharmaceutical therapies for advanced colorectal cancer.

PubMed

Leung, Henry W C; Chan, Agnes L F; Leung, Matthew S H; Lu, Chin-Li

2013-04-01

To systematically review and assess the quality of cost-effectiveness analyses (CEAs) of pharmaceutical therapies for metastatic colorectal cancer (mCRC). The MEDLINE, EMBASE, Cochrane, and EconLit databases were searched for the Medical Subject Headings or text key words quality-adjusted, QALY, life-year gained (LYG), and cost-effectiveness (January 1, 1999-December 31, 2009). Original CEAs of mCRC pharmacotherapy published in English were included. CEAs that measured health effects in units other than quality-adjusted life years or LYG and letters to the editor, case reports, posters, and editorials were excluded. Each article was independently assessed by 2 trained reviewers according to a quality checklist created by the Panel on Cost-Effectiveness in Health and Medicine. Twenty-four CEA studies pertaining to pharmaceutical therapies for mCRC were identified. All studies showed a wide variation in methodologic approaches, which resulted in a different range of incremental cost-effectiveness ratios reported for each regimen. We found common methodologic flaws in a significant number of CEA studies, including lack of clear description for critique of data quality; lack of method for adjusting costs for inflation and methods for obtaining expert judgment; no results of model validation; wide differences in the types of perspective, time horizon, study design, cost categories, and effect outcomes; and no quality assessment of data (cost and effectiveness) for the interventions evaluation. This study has shown a wide variation in the methodology and quality of cost-effectiveness analysis for mCRC. Improving quality and harmonization of CEA for cancer treatment is needed. Further study is suggested to assess the quality of CEA methodology outside the mCRC disease state.

Medical technology as a key driver of rising health expenditure: disentangling the relationship

PubMed Central

Sorenson, Corinna; Drummond, Michael; Bhuiyan Khan, Beena

2013-01-01

Health care spending has risen steadily in most countries, becoming a concern for decision-makers worldwide. Commentators often point to new medical technology as the key driver for burgeoning expenditures. This paper critically appraises this conjecture, based on an analysis of the existing literature, with the aim of offering a more detailed and considered analysis of this relationship. Several databases were searched to identify relevant literature. Various categories of studies (eg, multivariate and cost-effectiveness analyses) were included to cover different perspectives, methodological approaches, and issues regarding the link between medical technology and costs. Selected articles were reviewed and relevant information was extracted into a standardized template and analyzed for key cross-cutting themes, ie, impact of technology on costs, factors influencing this relationship, and methodological challenges in measuring such linkages. A total of 86 studies were reviewed. The analysis suggests that the relationship between medical technology and spending is complex and often conflicting. Findings were frequently contingent on varying factors, such as the availability of other interventions, patient population, and the methodological approach employed. Moreover, the impact of technology on costs differed across technologies, in that some (eg, cancer drugs, invasive medical devices) had significant financial implications, while others were cost-neutral or cost-saving. In light of these issues, we argue that decision-makers and other commentators should extend their focus beyond costs solely to include consideration of whether medical technology results in better value in health care and broader socioeconomic benefits. PMID:23807855

NASA Electronic Publishing System: Cost/benefit Methodology

NASA Technical Reports Server (NTRS)

Tuey, Richard C.

1994-01-01

The NASA Scientific and Technical Information Office was assigned the responsibility to examine the benefits of the utilization of electronic printing and duplicating systems throughout NASA Installations and Headquarters. The subject of this report is the documentation of the methodology used in justifying the acquisition of the most cost beneficial solution for the printing and duplicating requirements of a duplicating facility that is contemplating the acquisition of an electronic printing and duplicating system. Four alternatives are presented with each alternative costed out with its associated benefits. The methodology goes a step further than just a cost benefit analysis through its comparison of risks associated with each alternative, sensitivity to number of impressions and productivity gains on the selected alternative and finally the return on investment for the selected alternative. The report can be used in conjunction with the two earlier reports, NASA-TM-106242 and TM-106510 in guiding others in determining the cost effective duplicating alternative.

10 CFR 436.13 - Presuming cost-effectiveness results.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Methodology and Procedures for Life Cycle Cost Analyses § 436.13 Presuming cost-effectiveness results. (a) If... life cycle cost-effective without further analysis. (b) A Federal agency may presume that an investment in an energy or water conservation measure retrofit to an existing Federal building is not life cycle...

System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

2012-11-01

Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysismore » was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.« less

Reference Model 6 (RM6): Oscillating Wave Energy Converter.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bull, Diana L; Smith, Chris; Jenne, Dale Scott

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter reference model design in a complementary manner to Reference Models 1-4 contained in the above report. In this report, a conceptual design for an Oscillating Water Column Wave Energy Converter (WEC) device appropriate for the modeled reference resource site was identified, and a detailed backward bent duct buoy (BBDB) device design was developed using a combination of numerical modeling tools and scaled physical models. Our team used the methodology in SAND2013-9040more » for the economic analysis that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays, up to 100 devices. The methodology was applied to identify key cost drivers and to estimate levelized cost of energy (LCOE) for this RM6 Oscillating Water Column device in dollars per kilowatt-hour ($/kWh). Although many costs were difficult to estimate at this time due to the lack of operational experience, the main contribution of this work was to disseminate a detailed set of methodologies and models that allow for an initial cost analysis of this emerging technology. This project is sponsored by the U.S. Department of Energy's (DOE) Wind and Water Power Technologies Program Office (WWPTO), within the Office of Energy Efficiency & Renewable Energy (EERE). Sandia National Laboratories, the lead in this effort, collaborated with partners from National Laboratories, industry, and universities to design and test this reference model.« less

The economic burden of patient safety targets in acute care: a systematic review

PubMed Central

Mittmann, Nicole; Koo, Marika; Daneman, Nick; McDonald, Andrew; Baker, Michael; Matlow, Anne; Krahn, Murray; Shojania, Kaveh G; Etchells, Edward

2012-01-01

Background Our objective was to determine the quality of literature in costing of the economic burden of patient safety. Methods We selected 15 types of patient safety targets for our systematic review. We searched the literature published between 2000 and 2010 using the following terms: “costs and cost analysis,” “cost-effectiveness,” “cost,” and “financial management, hospital.” We appraised the methodologic quality of potentially relevant studies using standard economic methods. We recorded results in the original currency, adjusted for inflation, and then converted to 2010 US dollars for comparative purposes (2010 US$1.00 = 2010 €0.76). The quality of each costing study per patient safety target was also evaluated. Results We screened 1948 abstracts, and identified 158 potentially eligible studies, of which only 61 (39%) reported any costing methodology. In these 61 studies, we found wide estimates of the attributable costs of patient safety events ranging from $2830 to $10,074. In general hospital populations, the cost per case of hospital-acquired infection ranged from $2132 to $15,018. Nosocomial bloodstream infection was associated with costs ranging from $2604 to $22,414. Conclusion There are wide variations in the estimates of economic burden due to differences in study methods and methodologic quality. Greater attention to methodologic standards for economic evaluations in patient safety is needed. PMID:23097615

Comparison between two methodologies for urban drainage decision aid.

PubMed

Moura, P M; Baptista, M B; Barraud, S

2006-01-01

The objective of the present work is to compare two methodologies based on multicriteria analysis for the evaluation of stormwater systems. The first methodology was developed in Brazil and is based on performance-cost analysis, the second one is ELECTRE III. Both methodologies were applied to a case study. Sensitivity and robustness analyses were then carried out. These analyses demonstrate that both methodologies have equivalent results, and present low sensitivity and high robustness. These results prove that the Brazilian methodology is consistent and can be used safely in order to select a good solution or a small set of good solutions that could be compared with more detailed methods afterwards.

Toward a rational appraisal of highway cost allocation : a position paper.

DOT National Transportation Integrated Search

1979-01-01

In addressing the issue of cost allocation, the author asked if there was a reasonable case for an analysis of highway cost allocation in Virginia, and, if so, what could be learned from the literature about an appropriate methodology.

Methodologies for the Statistical Analysis of Memory Response to Radiation

NASA Astrophysics Data System (ADS)

Bosser, Alexandre L.; Gupta, Viyas; Tsiligiannis, Georgios; Frost, Christopher D.; Zadeh, Ali; Jaatinen, Jukka; Javanainen, Arto; Puchner, Helmut; Saigné, Frédéric; Virtanen, Ari; Wrobel, Frédéric; Dilillo, Luigi

2016-08-01

Methodologies are proposed for in-depth statistical analysis of Single Event Upset data. The motivation for using these methodologies is to obtain precise information on the intrinsic defects and weaknesses of the tested devices, and to gain insight on their failure mechanisms, at no additional cost. The case study is a 65 nm SRAM irradiated with neutrons, protons and heavy ions. This publication is an extended version of a previous study [1].

Life-cycle cost as basis to optimize waste collection in space and time: A methodology for obtaining a detailed cost breakdown structure.

PubMed

Sousa, Vitor; Dias-Ferreira, Celia; Vaz, João M; Meireles, Inês

2018-05-01

Extensive research has been carried out on waste collection costs mainly to differentiate costs of distinct waste streams and spatial optimization of waste collection services (e.g. routes, number, and location of waste facilities). However, waste collection managers also face the challenge of optimizing assets in time, for instance deciding when to replace and how to maintain, or which technological solution to adopt. These issues require a more detailed knowledge about the waste collection services' cost breakdown structure. The present research adjusts the methodology for buildings' life-cycle cost (LCC) analysis, detailed in the ISO 15686-5:2008, to the waste collection assets. The proposed methodology is then applied to the waste collection assets owned and operated by a real municipality in Portugal (Cascais Ambiente - EMAC). The goal is to highlight the potential of the LCC tool in providing a baseline for time optimization of the waste collection service and assets, namely assisting on decisions regarding equipment operation and replacement.

Cost-effectiveness analyses of hepatitis A vaccine: a systematic review to explore the effect of methodological quality on the economic attractiveness of vaccination strategies.

PubMed

Anonychuk, Andrea M; Tricco, Andrea C; Bauch, Chris T; Pham, Ba'; Gilca, Vladimir; Duval, Bernard; John-Baptiste, Ava; Woo, Gloria; Krahn, Murray

2008-01-01

Hepatitis A vaccines have been available for more than a decade. Because the burden of hepatitis A virus has fallen in developed countries, the appropriate role of vaccination programmes, especially universal vaccination strategies, remains unclear. Cost-effectiveness analysis is a useful method of relating the costs of vaccination to its benefits, and may inform policy. This article systematically reviews the evidence on the cost effectiveness of hepatitis A vaccination in varying populations, and explores the effects of methodological quality and key modelling issues on the cost-effectiveness ratios.Cost-effectiveness/cost-utility studies of hepatitis A vaccine were identified via a series of literature searches (MEDLINE, EMBASE, HSTAR and SSCI). Citations and full-text articles were reviewed independently by two reviewers. Reference searching, author searches and expert consultation ensured literature saturation. Incremental cost-effectiveness ratios (ICERs) were abstracted for base-case analyses, converted to $US, year 2005 values, and categorised to reflect various levels of cost effectiveness. Quality of reporting, methodological issues and key modelling issues were assessed using frameworks published in the literature.Thirty-one cost-effectiveness studies (including 12 cost-utility analyses) were included from full-text article review (n = 58) and citation screening (n = 570). These studies evaluated universal mass vaccination (n = 14), targeted vaccination (n = 17) and vaccination of susceptibles (i.e. individuals initially screened for antibody and, if susceptible, vaccinated) [n = 13]. For universal vaccination, 50% of the ICERs were <$US20 000 per QALY or life-year gained. Analyses evaluating vaccination in children, particularly in high incidence areas, produced the most attractive ICERs. For targeted vaccination, cost effectiveness was highly dependent on the risk of infection.Incidence, vaccine cost and discount rate were the most influential parameters in sensitivity analyses. Overall, analyses that evaluated the combined hepatitis A/hepatitis B vaccine, adjusted incidence for under-reporting, included societal costs and that came from studies of higher methodological quality tended to have more attractive cost-effectiveness ratios. Methodological quality varied across studies. Major methodological flaws included inappropriate model type, comparator, incidence estimate and inclusion/exclusion of costs.

Examining the effectiveness of municipal solid waste management systems: An integrated cost-benefit analysis perspective with a financial cost modeling in Taiwan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weng, Yu-Chi, E-mail: clyde.weng@gmail.com; Fujiwara, Takeshi

2011-06-15

In order to develop a sound material-cycle society, cost-effective municipal solid waste (MSW) management systems are required for the municipalities in the context of the integrated accounting system for MSW management. Firstly, this paper attempts to establish an integrated cost-benefit analysis (CBA) framework for evaluating the effectiveness of MSW management systems. In this paper, detailed cost/benefit items due to waste problems are particularly clarified. The stakeholders of MSW management systems, including the decision-makers of the municipalities and the citizens, are expected to reconsider the waste problems in depth and thus take wise actions with the aid of the proposed CBAmore » framework. Secondly, focusing on the financial cost, this study develops a generalized methodology to evaluate the financial cost-effectiveness of MSW management systems, simultaneously considering the treatment technological levels and policy effects. The impacts of the influencing factors on the annual total and average financial MSW operation and maintenance (O and M) costs are analyzed in the Taiwanese case study with a demonstrative short-term future projection of the financial costs under scenario analysis. The established methodology would contribute to the evaluation of the current policy measures and to the modification of the policy design for the municipalities.« less

Cost Analysis of Ten Allied Health Education Programs.

ERIC Educational Resources Information Center

Harper, Ronald L.; Gonyea, Meredith A.

The cost elements were identified and a methodology developed to analyze the total costs of allied health education programs and the cost per student for purposes of planning the allocation of scarce resources. The study was conducted by the Ohio State University School of Allied Medical Professions and focused on the following 10 allied health…

Incorporating social network effects into cost-effectiveness analysis: a methodological contribution with application to obesity prevention

PubMed Central

Konchak, Chad; Prasad, Kislaya

2012-01-01

Objectives To develop a methodology for integrating social networks into traditional cost-effectiveness analysis (CEA) studies. This will facilitate the economic evaluation of treatment policies in settings where health outcomes are subject to social influence. Design This is a simulation study based on a Markov model. The lifetime health histories of a cohort are simulated, and health outcomes compared, under alternative treatment policies. Transition probabilities depend on the health of others with whom there are shared social ties. Setting The methodology developed is shown to be applicable in any healthcare setting where social ties affect health outcomes. The example of obesity prevention is used for illustration under the assumption that weight changes are subject to social influence. Main outcome measures Incremental cost-effectiveness ratio (ICER). Results When social influence increases, treatment policies become more cost effective (have lower ICERs). The policy of only treating individuals who span multiple networks can be more cost effective than the policy of treating everyone. This occurs when the network is more fragmented. Conclusions (1) When network effects are accounted for, they result in very different values of incremental cost-effectiveness ratios (ICERs). (2) Treatment policies can be devised to take network structure into account. The integration makes it feasible to conduct a cost-benefit evaluation of such policies. PMID:23117559

Review of the probabilistic failure analysis methodology and other probabilistic approaches for application in aerospace structural design

NASA Technical Reports Server (NTRS)

Townsend, J.; Meyers, C.; Ortega, R.; Peck, J.; Rheinfurth, M.; Weinstock, B.

1993-01-01

Probabilistic structural analyses and design methods are steadily gaining acceptance within the aerospace industry. The safety factor approach to design has long been the industry standard, and it is believed by many to be overly conservative and thus, costly. A probabilistic approach to design may offer substantial cost savings. This report summarizes several probabilistic approaches: the probabilistic failure analysis (PFA) methodology developed by Jet Propulsion Laboratory, fast probability integration (FPI) methods, the NESSUS finite element code, and response surface methods. Example problems are provided to help identify the advantages and disadvantages of each method.

A cost-effective methodology for the design of massively-parallel VLSI functional units

NASA Technical Reports Server (NTRS)

Venkateswaran, N.; Sriram, G.; Desouza, J.

1993-01-01

In this paper we propose a generalized methodology for the design of cost-effective massively-parallel VLSI Functional Units. This methodology is based on a technique of generating and reducing a massive bit-array on the mask-programmable PAcube VLSI array. This methodology unifies (maintains identical data flow and control) the execution of complex arithmetic functions on PAcube arrays. It is highly regular, expandable and uniform with respect to problem-size and wordlength, thereby reducing the communication complexity. The memory-functional unit interface is regular and expandable. Using this technique functional units of dedicated processors can be mask-programmed on the naked PAcube arrays, reducing the turn-around time. The production cost of such dedicated processors can be drastically reduced since the naked PAcube arrays can be mass-produced. Analysis of the the performance of functional units designed by our method yields promising results.

Challenges with cost-utility analyses of behavioural interventions among older adults at risk for dementia.

PubMed

Davis, Jennifer C; Bryan, Stirling; Marra, Carlo A; Hsiung, Ging-Yuek R; Liu-Ambrose, Teresa

2015-10-01

Cognitive decline is one of the most prominent healthcare issues of the 21st century. Within the context of combating cognitive decline through behavioural interventions, physical activity is a promising approach. There is a dearth of health economic data in the area of behavioural interventions for dementia prevention. Yet, economic evaluations are essential for providing information to policy makers for resource allocation. It is essential we first address population and intervention-specific methodological challenges prior to building a larger evidence base. We use a cost-utility analysis conducted alongside the exercise for cognition and everyday living (EXCEL) study to illustrate methodological challenges specific to assessing the cost-effectiveness of behavioural interventions aimed at older adults at risk of cognitive decline. A cost-utility analysis conducted concurrently with a 6-month, three-arm randomised controlled trial (ie, the EXCEL study) was used as an example to identify and discuss methodological challenges. Both the aerobic training and resistance training interventions were less costly than twice weekly balance and tone classes. In critically evaluating the economic evaluation of the EXCEL study we identified four category-specific challenges: (1) analysing costs; (2) assessing quality-adjusted life-years; (3) Incomplete data; and (4) 'Intervention' activities of the control group. Resistance training and aerobic training resulted in healthcare cost saving and were equally effective to balance and tone classes after only 6 months of intervention. To ensure this population is treated fairly in terms of claims on resources, we first need to identify areas for methodological improvement. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Risk-based economic decision analysis of remediation options at a PCE-contaminated site.

PubMed

Lemming, Gitte; Friis-Hansen, Peter; Bjerg, Poul L

2010-05-01

Remediation methods for contaminated sites cover a wide range of technical solutions with different remedial efficiencies and costs. Additionally, they may vary in their secondary impacts on the environment i.e. the potential impacts generated due to emissions and resource use caused by the remediation activities. More attention is increasingly being given to these secondary environmental impacts when evaluating remediation options. This paper presents a methodology for an integrated economic decision analysis which combines assessments of remediation costs, health risk costs and potential environmental costs. The health risks costs are associated with the residual contamination left at the site and its migration to groundwater used for drinking water. A probabilistic exposure model using first- and second-order reliability methods (FORM/SORM) is used to estimate the contaminant concentrations at a downstream groundwater well. Potential environmental impacts on the local, regional and global scales due to the site remediation activities are evaluated using life cycle assessments (LCA). The potential impacts on health and environment are converted to monetary units using a simplified cost model. A case study based upon the developed methodology is presented in which the following remediation scenarios are analyzed and compared: (a) no action, (b) excavation and off-site treatment of soil, (c) soil vapor extraction and (d) thermally enhanced soil vapor extraction by electrical heating of the soil. Ultimately, the developed methodology facilitates societal cost estimations of remediation scenarios which can be used for internal ranking of the analyzed options. Despite the inherent uncertainties of placing a value on health and environmental impacts, the presented methodology is believed to be valuable in supporting decisions on remedial interventions. Copyright 2010 Elsevier Ltd. All rights reserved.

The ALMA CONOPS project: the impact of funding decisions on observatory performance

NASA Astrophysics Data System (ADS)

Ibsen, Jorge; Hibbard, John; Filippi, Giorgio

2014-08-01

In time when every penny counts, many organizations are facing the question of how much scientific impact a budget cut can have or, putting it in more general terms, which is the science impact of alternative (less costly) operational modes. In reply to such question posted by the governing bodies, the ALMA project had to develop a methodology (ALMA Concepts for Operations, CONOPS) that attempts to measure the impact that alternative operational scenarios may have on the overall scientific production of the Observatory. Although the analysis and the results are ALMA specific, the developed approach is rather general and provides a methodology for a cost-performance analysis of alternatives before any radical alterations to the operations model are adopted. This paper describes the key aspects of the methodology: a) the definition of the Figures of Merit (FoMs) for the assessment of quantitative science performance impacts as well as qualitative impacts, and presents a methodology using these FoMs to evaluate the cost and impact of the different operational scenarios; b) the definition of a REFERENCE operational baseline; c) the identification of Alternative Scenarios each replacing one or more concepts in the REFERENCE by a different concept that has a lower cost and some level of scientific and/or operational impact; d) the use of a Cost-Performance plane to graphically combine the effects that the alternative scenarios can have in terms of cost reduction and affected performance. Although is a firstorder assessment, we believe this approach is useful for comparing different operational models and to understand the cost performance impact of these choices. This can be used to take decision to meet budget cuts as well as in evaluating possible new emergent opportunities.

Risk-benefit analysis and public policy: a bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, E.M.; Van Horn, A.J.

1976-11-01

Risk-benefit analysis has been implicitly practiced whenever decision-makers are confronted with decisions involving risks to life, health, or to the environment. Various methodologies have been developed to evaluate relevant criteria and to aid in assessing the impacts of alternative projects. Among these have been cost-benefit analysis, which has been widely used for project evaluation. However, in many cases it has been difficult to assign dollar costs to those criteria involving risks and benefits which are not now assigned explicit monetary values in our economic system. Hence, risk-benefit analysis has evolved to become more than merely an extension of cost-benefit analysis,more » and many methods have been applied to examine the trade-offs between risks and benefits. In addition, new scientific and statistical techniques have been developed for assessing current and future risks. The 950 references included in this bibliography are meant to suggest the breadth of those methodologies which have been applied to decisions involving risk.« less

The cost of nurse-sensitive adverse events.

PubMed

Pappas, Sharon Holcombe

2008-05-01

The aim of this study was to describe the methodology for nursing leaders to determine the cost of adverse events and effective levels of nurse staffing. The growing transparency of quality and cost outcomes motivates healthcare leaders to optimize the effectiveness of nurse staffing. Most hospitals have robust cost accounting systems that provide actual patient-level direct costs. These systems allow an analysis of the cost consumed by patients during a hospital stay. By knowing the cost of complications, leaders have the ability to justify the cost of improved staffing when quality evidence shows that higher nurse staffing improves quality. An analysis was performed on financial and clinical data from hospital databases of 3,200 inpatients. The purpose was to establish a methodology to determine actual cost per case. Three diagnosis-related groups were the focus of the analysis. Five adverse events were analyzed along with the costs. A regression analysis reported that the actual direct cost of an adverse event was dollars 1,029 per case in the congestive heart failure cases and dollars 903 in the surgical cases. There was a significant increase in the cost per case in medical patients with urinary tract infection and pressure ulcers and in surgical patients with urinary tract infection and pneumonia. The odds of pneumonia occurring in surgical patients decreased with additional registered nurse hours per patient day. Hospital cost accounting systems are useful in determining the cost of adverse events and can aid in decision making about nurse staffing. Adverse events add costs to patient care and should be measured at the unit level to adjust staffing to reduce adverse events and avoid costs.

77 FR 6971 - Establishment of User Fees for Filovirus Testing of Nonhuman Primate Liver Samples

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... (ELISA) or other appropriate methodology. Each specimen will be held for six months. After six months.../CDC's analysis of costs to the Government is based on the current methodology (ELISA) used to test NHP... different methodology or changes in the availability of ELISA reagents will affect the amount of the user...

An economic toolkit for identifying the cost of emergency medical services (EMS) systems: detailed methodology of the EMS Cost Analysis Project (EMSCAP).

PubMed

Lerner, E Brooke; Garrison, Herbert G; Nichol, Graham; Maio, Ronald F; Lookman, Hunaid A; Sheahan, William D; Franz, Timothy R; Austad, James D; Ginster, Aaron M; Spaite, Daniel W

2012-02-01

Calculating the cost of an emergency medical services (EMS) system using a standardized method is important for determining the value of EMS. This article describes the development of a methodology for calculating the cost of an EMS system to its community. This includes a tool for calculating the cost of EMS (the "cost workbook") and detailed directions for determining cost (the "cost guide"). The 12-step process that was developed is consistent with current theories of health economics, applicable to prehospital care, flexible enough to be used in varying sizes and types of EMS systems, and comprehensive enough to provide meaningful conclusions. It was developed by an expert panel (the EMS Cost Analysis Project [EMSCAP] investigator team) in an iterative process that included pilot testing the process in three diverse communities. The iterative process allowed ongoing modification of the toolkit during the development phase, based upon direct, practical, ongoing interaction with the EMS systems that were using the toolkit. The resulting methodology estimates EMS system costs within a user-defined community, allowing either the number of patients treated or the estimated number of lives saved by EMS to be assessed in light of the cost of those efforts. Much controversy exists about the cost of EMS and whether the resources spent for this purpose are justified. However, the existence of a validated toolkit that provides a standardized process will allow meaningful assessments and comparisons to be made and will supply objective information to inform EMS and community officials who are tasked with determining the utilization of scarce societal resources. © 2012 by the Society for Academic Emergency Medicine.

Using Data Envelopment Analysis to Improve Estimates of Higher Education Institution's Per-Student Education Costs

ERIC Educational Resources Information Center

Salerno, Carlo

2006-01-01

This paper puts forth a data envelopment analysis (DEA) approach to estimating higher education institutions' per-student education costs (PSCs) in an effort to redress a number of methodological problems endemic to such estimations, particularly the allocation of shared expenditures between education and other institutional activities. An example…

Valuing Non-CO2 GHG Emission Changes in Benefit-Cost Analysis

EPA Science Inventory

The climate impacts of greenhouse gas (GHG) emissions impose social costs on society. To date, EPA has not had an approach to estimate the economic benefits of reducing emissions of non-CO2 GHGs (or the costs of increasing them) that is consistent with the methodology underlying...

10 CFR 436.12 - Life cycle cost methodology.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Life cycle cost methodology. 436.12 Section 436.12 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.12 Life cycle cost methodology. The life cycle cost methodology...

10 CFR 436.12 - Life cycle cost methodology.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Life cycle cost methodology. 436.12 Section 436.12 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.12 Life cycle cost methodology. The life cycle cost methodology...

10 CFR 436.12 - Life cycle cost methodology.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Life cycle cost methodology. 436.12 Section 436.12 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.12 Life cycle cost methodology. The life cycle cost methodology...

10 CFR 436.12 - Life cycle cost methodology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Life cycle cost methodology. 436.12 Section 436.12 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.12 Life cycle cost methodology. The life cycle cost methodology...

10 CFR 436.12 - Life cycle cost methodology.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Life cycle cost methodology. 436.12 Section 436.12 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Methodology and Procedures for Life Cycle Cost Analyses § 436.12 Life cycle cost methodology. The life cycle cost methodology...

Performance-based, cost- and time-effective pcb analytical methodology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarado, J. S.

1998-06-11

Laboratory applications for the analysis of PCBs (polychlorinated biphenyls) in environmental matrices such as soil/sediment/sludge and oil/waste oil were evaluated for potential reduction in waste, source reduction, and alternative techniques for final determination. As a consequence, new procedures were studied for solvent substitution, miniaturization of extraction and cleanups, minimization of reagent consumption, reduction of cost per analysis, and reduction of time. These new procedures provide adequate data that meet all the performance requirements for the determination of PCBs. Use of the new procedures reduced costs for all sample preparation techniques. Time and cost were also reduced by combining the newmore » sample preparation procedures with the power of fast gas chromatography. Separation of Aroclor 1254 was achieved in less than 6 min by using DB-1 and SPB-608 columns. With the greatly shortened run times, reproducibility can be tested quickly and consequently with low cost. With performance-based methodology, the applications presented here can be applied now, without waiting for regulatory approval.« less

How Methodologic Differences Affect Results of Economic Analyses: A Systematic Review of Interferon Gamma Release Assays for the Diagnosis of LTBI

PubMed Central

Oxlade, Olivia; Pinto, Marcia; Trajman, Anete; Menzies, Dick

2013-01-01

Introduction Cost effectiveness analyses (CEA) can provide useful information on how to invest limited funds, however they are less useful if different analysis of the same intervention provide unclear or contradictory results. The objective of our study was to conduct a systematic review of methodologic aspects of CEA that evaluate Interferon Gamma Release Assays (IGRA) for the detection of Latent Tuberculosis Infection (LTBI), in order to understand how differences affect study results. Methods A systematic review of studies was conducted with particular focus on study quality and the variability in inputs used in models used to assess cost-effectiveness. A common decision analysis model of the IGRA versus Tuberculin Skin Test (TST) screening strategy was developed and used to quantify the impact on predicted results of observed differences of model inputs taken from the studies identified. Results Thirteen studies were ultimately included in the review. Several specific methodologic issues were identified across studies, including how study inputs were selected, inconsistencies in the costing approach, the utility of the QALY (Quality Adjusted Life Year) as the effectiveness outcome, and how authors choose to present and interpret study results. When the IGRA versus TST test strategies were compared using our common decision analysis model predicted effectiveness largely overlapped. Implications Many methodologic issues that contribute to inconsistent results and reduced study quality were identified in studies that assessed the cost-effectiveness of the IGRA test. More specific and relevant guidelines are needed in order to help authors standardize modelling approaches, inputs, assumptions and how results are presented and interpreted. PMID:23505412

Examining the effectiveness of municipal solid waste management systems: an integrated cost-benefit analysis perspective with a financial cost modeling in Taiwan.

PubMed

Weng, Yu-Chi; Fujiwara, Takeshi

2011-06-01

In order to develop a sound material-cycle society, cost-effective municipal solid waste (MSW) management systems are required for the municipalities in the context of the integrated accounting system for MSW management. Firstly, this paper attempts to establish an integrated cost-benefit analysis (CBA) framework for evaluating the effectiveness of MSW management systems. In this paper, detailed cost/benefit items due to waste problems are particularly clarified. The stakeholders of MSW management systems, including the decision-makers of the municipalities and the citizens, are expected to reconsider the waste problems in depth and thus take wise actions with the aid of the proposed CBA framework. Secondly, focusing on the financial cost, this study develops a generalized methodology to evaluate the financial cost-effectiveness of MSW management systems, simultaneously considering the treatment technological levels and policy effects. The impacts of the influencing factors on the annual total and average financial MSW operation and maintenance (O&M) costs are analyzed in the Taiwanese case study with a demonstrative short-term future projection of the financial costs under scenario analysis. The established methodology would contribute to the evaluation of the current policy measures and to the modification of the policy design for the municipalities. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Costing the scaling-up of human resources for health: lessons from Mozambique and Guinea Bissau

PubMed Central

2010-01-01

Introduction In the context of the current human resources for health (HRH) crisis, the need for comprehensive Human Resources Development Plans (HRDP) is acute, especially in resource-scarce sub-Saharan African countries. However, the financial implications of such plans rarely receive due consideration, despite the availability of much advice and examples in the literature on how to conduct HRDP costing. Global initiatives have also been launched recently to standardise costing methodologies and respective tools. Methods This paper reports on two separate experiences of HRDP costing in Mozambique and Guinea Bissau, with the objective to provide an insight into the practice of costing exercises in information-poor settings, as well as to contribute to the existing debate on HRH costing methodologies. The study adopts a case-study approach to analyse the methodologies developed in the two countries, their contexts, policy processes and actors involved. Results From the analysis of the two cases, it emerged that the costing exercises represented an important driver of the HRDP elaboration, which lent credibility to the process, and provided a financial framework within which HRH policies could be discussed. In both cases, bottom-up and country-specific methods were designed to overcome the countries' lack of cost and financing data, as well as to interpret their financial systems. Such an approach also allowed the costing exercises to feed directly into the national planning and budgeting process. Conclusions The authors conclude that bottom-up and country-specific costing methodologies have the potential to serve adequately the multi-faceted purpose of the exercise. It is recognised that standardised tools and methodologies may help reduce local governments' dependency on foreign expertise to conduct the HRDP costing and facilitate regional and international comparisons. However, adopting pre-defined and insufficiently flexible tools may undermine the credibility of the costing exercise, and reduce the space for policy negotiation opportunities within the HRDP elaboration process. PMID:20579341

Costing the scaling-up of human resources for health: lessons from Mozambique and Guinea Bissau.

PubMed

Tyrrell, Amanda K; Russo, Giuliano; Dussault, Gilles; Ferrinho, Paulo

2010-06-25

In the context of the current human resources for health (HRH) crisis, the need for comprehensive Human Resources Development Plans (HRDP) is acute, especially in resource-scarce sub-Saharan African countries. However, the financial implications of such plans rarely receive due consideration, despite the availability of much advice and examples in the literature on how to conduct HRDP costing. Global initiatives have also been launched recently to standardise costing methodologies and respective tools. This paper reports on two separate experiences of HRDP costing in Mozambique and Guinea Bissau, with the objective to provide an insight into the practice of costing exercises in information-poor settings, as well as to contribute to the existing debate on HRH costing methodologies. The study adopts a case-study approach to analyse the methodologies developed in the two countries, their contexts, policy processes and actors involved. From the analysis of the two cases, it emerged that the costing exercises represented an important driver of the HRDP elaboration, which lent credibility to the process, and provided a financial framework within which HRH policies could be discussed. In both cases, bottom-up and country-specific methods were designed to overcome the countries' lack of cost and financing data, as well as to interpret their financial systems. Such an approach also allowed the costing exercises to feed directly into the national planning and budgeting process. The authors conclude that bottom-up and country-specific costing methodologies have the potential to serve adequately the multi-faceted purpose of the exercise. It is recognised that standardised tools and methodologies may help reduce local governments' dependency on foreign expertise to conduct the HRDP costing and facilitate regional and international comparisons. However, adopting pre-defined and insufficiently flexible tools may undermine the credibility of the costing exercise, and reduce the space for policy negotiation opportunities within the HRDP elaboration process.

Social costs of road crashes: An international analysis.

PubMed

Wijnen, Wim; Stipdonk, Henk

2016-09-01

This paper provides an international overview of the most recent estimates of the social costs of road crashes: total costs, value per casualty and breakdown in cost components. The analysis is based on publications about the national costs of road crashes of 17 countries, of which ten high income countries (HICs) and seven low and middle income countries (LMICs). Costs are expressed as a proportion of the gross domestic product (GDP). Differences between countries are described and explained. These are partly a consequence of differences in the road safety level, but there are also methodological explanations. Countries may or may not correct for underreporting of road crashes, they may or may not use the internationally recommended willingness to pay (WTP)-method for estimating human costs, and there are methodological differences regarding the calculation of some other cost components. The analysis shows that the social costs of road crashes in HICs range from 0.5% to 6.0% of the GDP with an average of 2.7%. Excluding countries that do not use a WTP- method for estimating human costs and countries that do not correct for underreporting, results in average costs of 3.3% of GDP. For LMICs that do correct for underreporting the share in GDP ranges from 1.1% to 2.9%. However, none of the LMICs included has performed a WTP study of the human costs. A major part of the costs is related to injuries: an average share of 50% for both HICs and LMICs. The average share of fatalities in the costs is 23% and 30% respectively. Prevention of injuries is thus important to bring down the socio-economic burden of road crashes. The paper shows that there are methodological differences between countries regarding cost components that are taken into account and regarding the methods used to estimate specific cost components. In order to be able to make sound comparisons of the costs of road crashes across countries, (further) harmonization of cost studies is recommended. This can be achieved by updating and improving international guidelines and applying them in future cost studies. The information regarding some cost components, particularly human costs and property damage, is poor and more research into these cost components is recommended. Copyright © 2016 Elsevier Ltd. All rights reserved.

Performance analysis of complex repairable industrial systems using PSO and fuzzy confidence interval based methodology.

PubMed

Garg, Harish

2013-03-01

The main objective of the present paper is to propose a methodology for analyzing the behavior of the complex repairable industrial systems. In real-life situations, it is difficult to find the most optimal design policies for MTBF (mean time between failures), MTTR (mean time to repair) and related costs by utilizing available resources and uncertain data. For this, the availability-cost optimization model has been constructed for determining the optimal design parameters for improving the system design efficiency. The uncertainties in the data related to each component of the system are estimated with the help of fuzzy and statistical methodology in the form of the triangular fuzzy numbers. Using these data, the various reliability parameters, which affects the system performance, are obtained in the form of the fuzzy membership function by the proposed confidence interval based fuzzy Lambda-Tau (CIBFLT) methodology. The computed results by CIBFLT are compared with the existing fuzzy Lambda-Tau methodology. Sensitivity analysis on the system MTBF has also been addressed. The methodology has been illustrated through a case study of washing unit, the main part of the paper industry. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Estimating age-based antiretroviral therapy costs for HIV-infected children in resource-limited settings based on World Health Organization weight-based dosing recommendations.

PubMed

Doherty, Kathleen; Essajee, Shaffiq; Penazzato, Martina; Holmes, Charles; Resch, Stephen; Ciaranello, Andrea

2014-05-02

Pediatric antiretroviral therapy (ART) has been shown to substantially reduce morbidity and mortality in HIV-infected infants and children. To accurately project program costs, analysts need accurate estimations of antiretroviral drug (ARV) costs for children. However, the costing of pediatric antiretroviral therapy is complicated by weight-based dosing recommendations which change as children grow. We developed a step-by-step methodology for estimating the cost of pediatric ARV regimens for children ages 0-13 years old. The costing approach incorporates weight-based dosing recommendations to provide estimated ARV doses throughout childhood development. Published unit drug costs are then used to calculate average monthly drug costs. We compared our derived monthly ARV costs to published estimates to assess the accuracy of our methodology. The estimates of monthly ARV costs are provided for six commonly used first-line pediatric ARV regimens, considering three possible care scenarios. The costs derived in our analysis for children were fairly comparable to or slightly higher than available published ARV drug or regimen estimates. The methodology described here can be used to provide an accurate estimation of pediatric ARV regimen costs for cost-effectiveness analysts to project the optimum packages of care for HIV-infected children, as well as for program administrators and budget analysts who wish to assess the feasibility of increasing pediatric ART availability in constrained budget environments.

Comparing the Medicaid Retrospective Drug Utilization Review Program Cost-Savings Methods Used by State Agencies.

PubMed

Prada, Sergio I

2017-12-01

The Medicaid Drug Utilization Review (DUR) program is a 2-phase process conducted by Medicaid state agencies. The first phase is a prospective DUR and involves electronically monitoring prescription drug claims to identify prescription-related problems, such as therapeutic duplication, contraindications, incorrect dosage, or duration of treatment. The second phase is a retrospective DUR and involves ongoing and periodic examinations of claims data to identify patterns of fraud, abuse, underutilization, drug-drug interaction, or medically unnecessary care, implementing corrective actions when needed. The Centers for Medicare & Medicaid Services requires each state to measure prescription drug cost-savings generated from its DUR programs on an annual basis, but it provides no guidance or unified methodology for doing so. To describe and synthesize the methodologies used by states to measure cost-savings using their Medicaid retrospective DUR program in federal fiscal years 2014 and 2015. For each state, the cost-savings methodologies included in the Medicaid DUR 2014 and 2015 reports were downloaded from Medicaid's website. The reports were then reviewed and synthesized. Methods described by the states were classified according to research designs often described in evaluation textbooks. In 2014, the most often used prescription drugs cost-savings estimation methodology for the Medicaid retrospective DUR program was a simple pre-post intervention method, without a comparison group (ie, 12 states). In 2015, the most common methodology used was a pre-post intervention method, with a comparison group (ie, 14 states). Comparisons of savings attributed to the program among states are still unreliable, because of a lack of a common methodology available for measuring cost-savings. There is great variation among states in the methods used to measure prescription drug utilization cost-savings. This analysis suggests that there is still room for improvement in terms of methodology transparency, which is important, because lack of transparency hinders states from learning from each other. Ultimately, the federal government needs to evaluate and improve its DUR program.

Decision analysis to complete diagnostic research by closing the gap between test characteristics and cost-effectiveness.

PubMed

Schaafsma, Joanna D; van der Graaf, Yolanda; Rinkel, Gabriel J E; Buskens, Erik

2009-12-01

The lack of a standard methodology in diagnostic research impedes adequate evaluation before implementation of constantly developing diagnostic techniques. We discuss the methodology of diagnostic research and underscore the relevance of decision analysis in the process of evaluation of diagnostic tests. Overview and conceptual discussion. Diagnostic research requires a stepwise approach comprising assessment of test characteristics followed by evaluation of added value, clinical outcome, and cost-effectiveness. These multiple goals are generally incompatible with a randomized design. Decision-analytic models provide an important alternative through integration of the best available evidence. Thus, critical assessment of clinical value and efficient use of resources can be achieved. Decision-analytic models should be considered part of the standard methodology in diagnostic research. They can serve as a valid alternative to diagnostic randomized clinical trials (RCTs).

Software Cost Estimation Using a Decision Graph Process: A Knowledge Engineering Approach

NASA Technical Reports Server (NTRS)

Stukes, Sherry; Spagnuolo, John, Jr.

2011-01-01

This paper is not a description per se of the efforts by two software cost analysts. Rather, it is an outline of the methodology used for FSW cost analysis presented in a form that would serve as a foundation upon which others may gain insight into how to perform FSW cost analyses for their own problems at hand.

Anthropogenic microfibres pollution in marine biota. A new and simple methodology to minimize airborne contamination.

PubMed

Torre, Michele; Digka, Nikoletta; Anastasopoulou, Aikaterini; Tsangaris, Catherine; Mytilineou, Chryssi

2016-12-15

Research studies on the effects of microlitter on marine biota have become more and more frequent the last few years. However, there is strong evidence that scientific results based on microlitter analyses can be biased by contamination from air transported fibres. This study demonstrates a low cost and easy to apply methodology to minimize the background contamination and thus to increase results validity. The contamination during the gastrointestinal content analysis of 400 fishes was tested for several sample processing steps of high risk airborne contamination (e.g. dissection, stereomicroscopic analysis, and chemical digestion treatment for microlitter extraction). It was demonstrated that, using our methodology based on hermetic enclosure devices, isolating the working areas during the various processing steps, airborne contamination reduced by 95.3%. The simplicity and low cost of this methodology provide the benefit that it could be applied not only to laboratory but also to field or on board work. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cost analysis of new and retrofit hot-air type solar assisted heating systems

NASA Technical Reports Server (NTRS)

Stewart, R. D.; Hawkins, B. J.

1978-01-01

A detailed cost analysis/cost improvement study was performed on two Department of Energy/National Aeronautics and Space Administration operational test sites to determine actual costs and potential cost improvements of new and retrofit hot air type, solar assisted heating and hot water systems for single family sized structures. This analysis concentrated on the first cost of a system which included procurement, installation, and integration of a solar assisted heating and hot water system on a new or retrofit basis; it also provided several cost projections which can be used as inputs to payback analyses, depending upon the degree of optimism or future improvements assumed. Cost definitions were developed for five categories of cost, and preliminary estimates were developed for each. The costing methodology, approach, and results together with several candidate low cost designs are described.

Economic evaluations of alcohol prevention interventions: Is the evidence sufficient? A review of methodological challenges.

PubMed

Hill, Sarah R; Vale, Luke; Hunter, David; Henderson, Emily; Oluboyede, Yemi

2017-12-01

Public health interventions have unique characteristics compared to health technologies, which present additional challenges for economic evaluation (EE). High quality EEs that are able to address the particular methodological challenges are important for public health decision-makers. In England, they are even more pertinent given the transition of public health responsibilities in 2013 from the National Health Service to local government authorities where new agents are shaping policy decisions. Addressing alcohol misuse is a globally prioritised public health issue. This article provides a systematic review of EE and priority-setting studies for interventions to prevent and reduce alcohol misuse published internationally over the past decade (2006-2016). This review appraises the EE and priority-setting evidence to establish whether it is sufficient to meet the informational needs of public health decision-makers. 619 studies were identified via database searches. 7 additional studies were identified via hand searching journals, grey literature and reference lists. 27 met inclusion criteria. Methods identified included cost-utility analysis (18), cost-effectiveness analysis (6), cost-benefit analysis (CBA) (1), cost-consequence analysis (CCA) (1) and return-on-investment (1). The review identified a lack of consideration of methodological challenges associated with evaluating public health interventions and limited use of methods such as CBA and CCA which have been recommended as potentially useful for EE in public health. No studies using other specific priority-setting tools were identified. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Decision Making Methodology to Mitigate Damage From Glacial Lake Outburst Floods From Imja Lake in Nepal

NASA Astrophysics Data System (ADS)

McKinney, D. C.; Cuellar, A. D.

2015-12-01

Climate change has accelerated glacial retreat in high altitude glaciated regions of Nepal leading to the growth and formation of glacier lakes. Glacial lake outburst floods (GLOF) are sudden events triggered by an earthquake, moraine failure or other shock that causes a sudden outflow of water. These floods are catastrophic because of their sudden onset, the difficulty predicting them, and enormous quantity of water and debris rapidly flooding downstream areas. Imja Lake in the Himalaya of Nepal has experienced accelerated growth since it first appeared in the 1960s. Communities threatened by a flood from Imja Lake have advocated for projects to adapt to the increasing threat of a GLOF. Nonetheless, discussions surrounding projects for Imja have not included a rigorous analysis of the potential consequences of a flood, probability of an event, or costs of mitigation projects in part because this information is unknown or uncertain. This work presents a demonstration of a decision making methodology developed to rationally analyze the risks posed by Imja Lake and the various adaptation projects proposed using available information. In this work the authors use decision analysis, data envelopement analysis (DEA), and sensitivity analysis to assess proposed adaptation measures that would mitigate damage in downstream communities from a GLOF. We use an existing hydrodynamic model of the at-risk area to determine how adaptation projects will affect downstream flooding and estimate fatalities using an empirical method developed for dam failures. The DEA methodology allows us to estimate the value of a statistical life implied by each project given the cost of the project and number of lives saved to determine which project is the most efficient. In contrast the decision analysis methodology requires fatalities to be assigned a cost but allows the inclusion of uncertainty in the decision making process. We compare the output of these two methodologies and determine the sensitivity of the conclusions to changes in uncertain input parameters including project cost, value of a statistical life, and time to a GLOF event.

Applications of cost-effectiveness methodologies in behavioral medicine.

PubMed

Kaplan, Robert M; Groessl, Erik J

2002-06-01

In 1996, the Panel on Cost-Effectiveness in Health and Medicine developed standards for cost-effectiveness analysis. The standards include the use of a societal perspective, that treatments be evaluated in comparison with the best available alternative (rather than with no care at all), and that health benefits be expressed in standardized units. Guidelines for cost accounting were also offered. Among 24,562 references on cost-effectiveness in Medline between 1995 and 2000, only a handful were relevant to behavioral medicine. Only 19 studies published between 1983 and 2000 met criteria for further evaluation. Among analyses that were reported, only 2 studies were found consistent with the Panel's criteria for high-quality analyses, although more recent studies were more likely to meet methodological standards. There are substantial opportunities to advance behavioral medicine by performing standardized cost-effectiveness analyses.

ChargeOut! : determining machine and capital equipment charge-out rates using discounted cash-flow analysis

Treesearch

E.M. (Ted) Bilek

2007-01-01

The model ChargeOut! was developed to determine charge-out rates or rates of return for machines and capital equipment. This paper introduces a costing methodology and applies it to a piece of capital equipment. Although designed for the forest industry, the methodology is readily transferable to other sectors. Based on discounted cash-flow analysis, ChargeOut!...

Lifetime costing of the body-in-white: Steel vs. aluminum

NASA Astrophysics Data System (ADS)

Han, Helen N.; Clark, Joel P.

1995-05-01

In order to make informed material choice decisions and to derive the maximum benefit from the use of alternative materials, the automobile producer must understand the full range of costs and benefits for each material. It is becoming clear that the conventional cost-benefit analysis structure currently used by the automotive industry must be broadened to include nontraditional costs such as the environmental externalities associated with the use of existing and potential automotive technologies. This article develops a methodology for comparing the costs and benefits associated with the use of alternative materials in automotive applications by focusing on steel and aluminum in the unibody body-in-white. Authors' Note: This is the first of two articles documenting a methodology for evaluating the lifetime monetary and environmental costs of alternative materials in automotive applications. This article addresses the traditional money costs while a subsequent paper, which is planned for the August issue, will address the environmental externalities.

How to convince your manager to invest in an HIS preimplementation methodology for appraisal of material, process and human costs and benefits.

PubMed Central

Bossard, B.; Renard, J. M.; Capelle, P.; Paradis, P.; Beuscart, M. C.

2000-01-01

Investing in information technology has become a crucial process in hospital management today. Medical and administrative managers are faced with difficulties in measuring medical information technology costs and benefits due to the complexity of the domain. This paper proposes a preimplementation methodology for evaluating and appraising material, process and human costs and benefits. Based on the users needs and organizational process analysis, the methodology provides an evaluative set of financial and non financial indicators which can be integrated in a decision making and investment evaluation process. We describe the first results obtained after a few months of operation for the Computer-Based Patient Record (CPR) project. Its full acceptance, in spite of some difficulties, encourages us to diffuse the method for the entire project. PMID:11079851

Process-based Cost Estimation for Ramjet/Scramjet Engines

NASA Technical Reports Server (NTRS)

Singh, Brijendra; Torres, Felix; Nesman, Miles; Reynolds, John

2003-01-01

Process-based cost estimation plays a key role in effecting cultural change that integrates distributed science, technology and engineering teams to rapidly create innovative and affordable products. Working together, NASA Glenn Research Center and Boeing Canoga Park have developed a methodology of process-based cost estimation bridging the methodologies of high-level parametric models and detailed bottoms-up estimation. The NASA GRC/Boeing CP process-based cost model provides a probabilistic structure of layered cost drivers. High-level inputs characterize mission requirements, system performance, and relevant economic factors. Design alternatives are extracted from a standard, product-specific work breakdown structure to pre-load lower-level cost driver inputs and generate the cost-risk analysis. As product design progresses and matures the lower level more detailed cost drivers can be re-accessed and the projected variation of input values narrowed, thereby generating a progressively more accurate estimate of cost-risk. Incorporated into the process-based cost model are techniques for decision analysis, specifically, the analytic hierarchy process (AHP) and functional utility analysis. Design alternatives may then be evaluated not just on cost-risk, but also user defined performance and schedule criteria. This implementation of full-trade study support contributes significantly to the realization of the integrated development environment. The process-based cost estimation model generates development and manufacturing cost estimates. The development team plans to expand the manufacturing process base from approximately 80 manufacturing processes to over 250 processes. Operation and support cost modeling is also envisioned. Process-based estimation considers the materials, resources, and processes in establishing cost-risk and rather depending on weight as an input, actually estimates weight along with cost and schedule.

Cost analysis of life support systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

A methodology was developed to predict realistic relative cost of Life Support Systems (LSS) and to define areas of major cost impacts in the development cycle. Emphasis was given to tailoring the cost data for usage by program planners and designers. The equipment classifications used based on the degree of refinement were as follows: (1) Working model; (2) low-fidelity prototype; (3) high-fidelity prototype; and (4) flight-qualified system. The major advanced LSS evaluated included the following: (1) Carbon dioxide removal; (2) oxygen recovery systems; (3) water recovery systems; (4) atmosphere analysis system.

An economic analysis of robotically assisted hysterectomy.

PubMed

Wright, Jason D; Ananth, Cande V; Tergas, Ana I; Herzog, Thomas J; Burke, William M; Lewin, Sharyn N; Lu, Yu-Shiang; Neugut, Alfred I; Hershman, Dawn L

2014-05-01

To perform an econometric analysis to examine the influence of procedure volume, variation in hospital accounting methodology, and use of various analytic methodologies on cost of robotically assisted hysterectomy for benign gynecologic disease and endometrial cancer. A national sample was used to identify women who underwent laparoscopic or robotically assisted hysterectomy for benign indications or endometrial cancer from 2006 to 2012. Surgeon and hospital volume were classified as the number of procedures performed before the index surgery. Total costs as well as fixed and variable costs were modeled using multivariable quantile regression methodology. A total of 180,230 women, including 169,324 women who underwent minimally invasive hysterectomy for benign indications and 10,906 patients whose hysterectomy was performed for endometrial cancer, were identified. The unadjusted median cost of robotically assisted hysterectomy for benign indications was $8,152 (interquartile range [IQR] $6,011-10,932) compared with $6,535 (IQR $5,127-8,357) for laparoscopic hysterectomy (P<.001). The cost differential decreased with increasing surgeon and hospital volume. The unadjusted median cost of robotically assisted hysterectomy for endometrial cancer was $9,691 (IQR $7,591-12,428) compared with $8,237 (IQR $6,400-10,807) for laparoscopic hysterectomy (P<.001). The cost differential decreased with increasing hospital volume from $2,471 for the first 5 to 15 cases to $924 for more than 50 cases. Based on surgeon volume, robotically assisted hysterectomy for endometrial cancer was $1,761 more expensive than laparoscopy for those who had performed fewer than five cases; the differential declined to $688 for more than 50 procedures compared with laparoscopic hysterectomy. The cost of robotic gynecologic surgery decreases with increased procedure volume. However, in all of the scenarios modeled, robotically assisted hysterectomy remained substantially more costly than laparoscopic hysterectomy.

Multi-criteria analysis for PM10 planning

NASA Astrophysics Data System (ADS)

Pisoni, Enrico; Carnevale, Claudio; Volta, Marialuisa

To implement sound air quality policies, Regulatory Agencies require tools to evaluate outcomes and costs associated to different emission reduction strategies. These tools are even more useful when considering atmospheric PM10 concentrations due to the complex nonlinear processes that affect production and accumulation of the secondary fraction of this pollutant. The approaches presented in the literature (Integrated Assessment Modeling) are mainly cost-benefit and cost-effective analysis. In this work, the formulation of a multi-objective problem to control particulate matter is proposed. The methodology defines: (a) the control objectives (the air quality indicator and the emission reduction cost functions); (b) the decision variables (precursor emission reductions); (c) the problem constraints (maximum feasible technology reductions). The cause-effect relations between air quality indicators and decision variables are identified tuning nonlinear source-receptor models. The multi-objective problem solution provides to the decision maker a set of not-dominated scenarios representing the efficient trade-off between the air quality benefit and the internal costs (emission reduction technology costs). The methodology has been implemented for Northern Italy, often affected by high long-term exposure to PM10. The source-receptor models used in the multi-objective analysis are identified processing long-term simulations of GAMES multiphase modeling system, performed in the framework of CAFE-Citydelta project.

Cost estimation: An expert-opinion approach. [cost analysis of research projects using the Delphi method (forecasting)

NASA Technical Reports Server (NTRS)

Buffalano, C.; Fogleman, S.; Gielecki, M.

1976-01-01

A methodology is outlined which can be used to estimate the costs of research and development projects. The approach uses the Delphi technique a method developed by the Rand Corporation for systematically eliciting and evaluating group judgments in an objective manner. The use of the Delphi allows for the integration of expert opinion into the cost-estimating process in a consistent and rigorous fashion. This approach can also signal potential cost-problem areas. This result can be a useful tool in planning additional cost analysis or in estimating contingency funds. A Monte Carlo approach is also examined.

Cost-Effectiveness Analysis: a proposal of new reporting standards in statistical analysis

PubMed Central

Bang, Heejung; Zhao, Hongwei

2014-01-01

Cost-effectiveness analysis (CEA) is a method for evaluating the outcomes and costs of competing strategies designed to improve health, and has been applied to a variety of different scientific fields. Yet, there are inherent complexities in cost estimation and CEA from statistical perspectives (e.g., skewness, bi-dimensionality, and censoring). The incremental cost-effectiveness ratio that represents the additional cost per one unit of outcome gained by a new strategy has served as the most widely accepted methodology in the CEA. In this article, we call for expanded perspectives and reporting standards reflecting a more comprehensive analysis that can elucidate different aspects of available data. Specifically, we propose that mean and median-based incremental cost-effectiveness ratios and average cost-effectiveness ratios be reported together, along with relevant summary and inferential statistics as complementary measures for informed decision making. PMID:24605979

Multiple Approaches to the Evaluation of Educational Reform: From Cost-Benefit to Power-Benefit Analysis.

ERIC Educational Resources Information Center

Paulston, Rolland G.

Theories or explanations of educational evaluation are discussed and categorized under two broad methodological headings, the objectivist and subjectivist epistemological orientations. They can be seen as potentially complementary empirical approaches that offer evaluators two methodological orientations to assess educational-reform outcomes.…

Publication patterns of comparative effectiveness research in spine neurosurgery.

PubMed

Hueng, Dueng-Yuan; Tsai, Chia-Lin; Hsu, Shih-Wei; Ma, Hsin-I

2012-07-01

The purpose of this study was to investigate publication patterns for comparative effectiveness research (CER) on spine neurosurgery. The authors searched the PubMed database for the period 1980-2012 using the key words "cost analysis," "utility analysis," "cost-utility," "outcomes research," "practical clinical research," "comparator trial," and "comparative effectiveness research," linked with "effectiveness" and "spine neurosurgery." From 1980 through April 9, 2012, neurosurgery CER publications accounted for 1.38% of worldwide CER publications (8657 of 626,330 articles). Spine neurosurgery CER accounted for only 0.02%, with 132 articles. The journal with the greatest number of publications on spine neurosurgery CER was Spine, followed by the Journal of Neurosurgery: Spine. The average annual publication rate for spine neurosurgery CER during this period was 4 articles (132 articles in 33 years), with 68 (51.52%) of the 132 articles being published within the past 5 years and a rising trend beginning in 2008. The top 3 contributing countries were the US, Turkey, and Japan, with 68, 8, and 7 articles, respectively. Only 8 regular articles (6.06%) focused on cost analysis. There is a paucity of publications using CER methodology in spine neurosurgery. Few articles address the issue of cost analysis. The promotion of continuing medical education in CER methodology is warranted. Further investigations to address cost analysis in comparative effectiveness studies of spine neurosurgery are crucial to expand the application of CER in public health.

System cost/performance analysis (study 2.3). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Kazangey, T.

1973-01-01

The relationships between performance, safety, cost, and schedule parameters were identified and quantified in support of an overall effort to generate program models and methodology that provide insight into a total space vehicle program. A specific space vehicle system, the attitude control system (ACS), was used, and a modeling methodology was selected that develops a consistent set of quantitative relationships among performance, safety, cost, and schedule, based on the characteristics of the components utilized in candidate mechanisms. These descriptive equations were developed for a three-axis, earth-pointing, mass expulsion ACS. A data base describing typical candidate ACS components was implemented, along with a computer program to perform sample calculations. This approach, implemented on a computer, is capable of determining the effect of a change in functional requirements to the ACS mechanization and the resulting cost and schedule. By a simple extension of this modeling methodology to the other systems in a space vehicle, a complete space vehicle model can be developed. Study results and recommendations are presented.

Estimating age-based antiretroviral therapy costs for HIV-infected children in resource-limited settings based on World Health Organization weight-based dosing recommendations

PubMed Central

2014-01-01

Background Pediatric antiretroviral therapy (ART) has been shown to substantially reduce morbidity and mortality in HIV-infected infants and children. To accurately project program costs, analysts need accurate estimations of antiretroviral drug (ARV) costs for children. However, the costing of pediatric antiretroviral therapy is complicated by weight-based dosing recommendations which change as children grow. Methods We developed a step-by-step methodology for estimating the cost of pediatric ARV regimens for children ages 0–13 years old. The costing approach incorporates weight-based dosing recommendations to provide estimated ARV doses throughout childhood development. Published unit drug costs are then used to calculate average monthly drug costs. We compared our derived monthly ARV costs to published estimates to assess the accuracy of our methodology. Results The estimates of monthly ARV costs are provided for six commonly used first-line pediatric ARV regimens, considering three possible care scenarios. The costs derived in our analysis for children were fairly comparable to or slightly higher than available published ARV drug or regimen estimates. Conclusions The methodology described here can be used to provide an accurate estimation of pediatric ARV regimen costs for cost-effectiveness analysts to project the optimum packages of care for HIV-infected children, as well as for program administrators and budget analysts who wish to assess the feasibility of increasing pediatric ART availability in constrained budget environments. PMID:24885453

The cost of power outages in the business and public sectors in Israel: Revealed preference vs. subjective evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beenstock, M.; Goldin, E.; Haitovsky, Y.

1997-05-01

The economic cost of power outages is a central parameter in the cost-benefit analysis of electric power reliability and the design of electric power systems. The authors present a new methodology for estimating the cost of power outages in the business and public sections and illustrate with data for Israel. The methodology is based on the principle of revealed preference, the cost of an outage may be inferred from the actions taken by consumers to mitigate losses induced by unsupplied electricity. If outages impose costs on businesses, managers are likely to invest in back-up power to mitigate the losses thatmore » are incurred when electricity is not supplied. Investment in back-up generators may then be used to impute the mitigated and unmitigated damage from outages. 12 refs., 3 figs., 7 tabs.« less

A Methodology for Assessing and Ranking Ballistic Missile Defense Technologies Using a System Performance Index

DTIC Science & Technology

2002-07-29

suggestions, and guidance concerning the technology assessment process. References 1. Using ACEIT for Total Ownership Cost Modeling and Analysis...2001 World Population Data Sheet, Population Reference Bureau, Washington, DC List of Acronyms ACEIT – Automated Cost Estimating Integrated

The cost-effectiveness of drug therapies to treat secondary hyperparathyroidism in renal failure: a focus on evidence regarding paricalcitol and cinacalcet.

PubMed

Lorenzoni, Valentina; Trieste, Leopoldo; Turchetti, Giuseppe

2015-01-01

The present review aims to assess the state-of-the-art regarding cost-effectiveness of therapy for secondary hyperparathyroidism in order to identify the best treatment and review methodological issues. PubMed and the Cochrane Library were searched to identify papers performing comparative analysis of costs and effects of treatment for secondary hyperparathyroidism in adult patients. Among the 66 papers identified, only 10 were included in the analysis. Treatment strategies evaluated in the selected papers were: cinacalcet in addition to vitamin D and phosphate binders versus vitamin D and phosphate binders only (seven papers), paricalcitol versus non-selective vitamin D (two papers), early and late introduction of cinacalcet in addition to vitamin D and phosphate binders (one paper) and paricalcitol versus cinacalcet (one paper). The high degree of heterogeneity among alternative treatments and methodological limits related to cost items considered, resource valuation methods and so on, make it unfeasible to reach a definite conclusion regarding cost-effectiveness but allow for future research opportunities.

Performance-cost evaluation methodology for ITS equipment deployment

DOT National Transportation Integrated Search

2000-09-01

Although extensive Intelligent Transportation Systems (ITS) technology is being deployed in the field, little analysis is being performed to evaluate the benefits of implementation schemes. Benefit analysis is particularly in need for one popular ITS...

Space Tug Docking Study. Volume 5: Cost Analysis

NASA Technical Reports Server (NTRS)

1976-01-01

The cost methodology, summary cost data, resulting cost estimates by Work Breakdown Structure (WBS), technical characteristics data, program funding schedules and the WBS for the costing are discussed. Cost estimates for two tasks of the study are reported. The first, developed cost estimates for design, development, test and evaluation (DDT&E) and theoretical first unit (TFU) at the component level (Level 7) for all items reported in the data base. Task B developed total subsystem DDT&E costs and funding schedules for the three candidate Rendezvous and Docking Systems: manual, autonomous, and hybrid.

The Development of a Methodology for Estimating the Cost of Air Force On-the-Job Training.

ERIC Educational Resources Information Center

Samers, Bernard N.; And Others

The Air Force uses a standardized costing methodology for resident technical training schools (TTS); no comparable methodology exists for computing the cost of on-the-job training (OJT). This study evaluates three alternative survey methodologies and a number of cost models for estimating the cost of OJT for airmen training in the Administrative…

Parts on Demand: Evaluation of Approaches to Achieve Flexible Manufacturing Systems for Navy Parts on Demand. Volume 2. Appendices

DTIC Science & Technology

1984-02-01

of Cost Analysis Worksheets * POD Program-Economic Analysis & Methodology - Economic Evaluation Procedures for POD Investment Program - System...Approval Considerations - POD Investment Program - Potential Improvement Areas for POD - Example Cost Categories and Determinants Appendix E Long Range R&D...Funding Profiles * Investment Strategy for Integrated Circuits Diminishing Sources of Supply - Problem Scope - Approach - Alternatives - Proposed

Examining the impact of cell phone conversations on driving using meta-analytic techniques.

PubMed

Horrey, William J; Wickens, Christopher D

2006-01-01

The performance costs associated with cell phone use while driving were assessed meta-analytically using standardized measures of effect size along five dimensions. There have been many studies on the impact of cell phone use on driving, showing some mixed findings. Twenty-three studies (contributing 47 analysis entries) met the appropriate conditions for the meta-analysis. The statistical results from each of these studies were converted into effect sizes and combined in the meta-analysis. Overall, there were clear costs to driving performance when drivers were engaged in cell phone conversations. However, subsequent analyses indicated that these costs were borne primarily by reaction time tasks, with far smaller costs associated with tracking (lane-keeping) performance. Hands-free and handheld phones revealed similar patterns of results for both measures of performance. Conversation tasks tended to show greater costs than did information-processing tasks (e.g., word games). There was a similar pattern of results for passenger and remote (cell phone) conversations. Finally, there were some small differences between simulator and field studies, though both exhibited costs in performance for cell phone use. We suggest that (a) there are significant costs to driver reactions to external hazards or events associated with cell phone use, (b) hands-free cell phones do not eliminate or substantially reduce these costs, and (c) different research methodologies or performance measures may underestimate these costs. Potential applications of this research include the assessment of performance costs attributable to different types of cell phones, cell phone conversations, experimental measures, or methodologies.

Do modern total knee replacements offer better value for money? A health economic analysis.

PubMed

Hamilton, David F; Clement, Nicholas D; Burnett, Richard; Patton, James T; Moran, Mathew; Howie, Colin R; Simpson, A H R W; Gaston, Paul

2013-11-01

Cost effectiveness is an increasingly important factor in today's healthcare environment, and selection of arthroplasty implant is not exempt from such concerns. Quality adjusted life years (QALYs) are the typical tool for this type of evaluation. Using this methodology, joint arthroplasty has been shown to be cost effective; however, studies directly comparing differing prostheses are lacking. Data was gathered in a single-centre prospective double-blind randomised controlled trial comparing the outcome of modern and traditional knee implants, using the Short Form 6 dimensional (SF-6D) score and quality adjusted life year (QALY) methodology. There was significant improvement in the SF-6D score for both groups at one year (p < 0.0001). The calculated overall life expectancy for the study cohort was 15.1 years, resulting in an overall QALY gain of 2.144 (95% CI 1.752-2.507). The modern implant group demonstrated a small improvement in SF-6D score compared to the traditional design at one year (0.141 versus 0.143, p = 0.94). This difference resulted in the modern implant costing £298 less per QALY at one year. This study demonstrates that modern implant technology does not influence the cost-effectiveness of TKA using the SF-6D and QALY methodology. This type of analysis however assesses health status, and is not sensitive to joint specific function. Evolutionary design changes in implant technology are thus unlikely to influence QALY analysis following joint replacement, which has important implications for implant procurement.

Toward a Methodology for Conducting Social Impact Assessments Using Quality of Social Life Indicators.

ERIC Educational Resources Information Center

Olsen, Marvin E.; Merwin, Donna J.

Broadly conceived, social impacts refer to all changes in the structure and functioning of patterned social ordering that occur in conjunction with an environmental, technological, or social innovation or alteration. Departing from the usual cost-benefit analysis approach, a new methodology proposes conducting social impact assessment grounded in…

Applying risk adjusted cost-effectiveness (RAC-E) analysis to hospitals: estimating the costs and consequences of variation in clinical practice.

PubMed

Karnon, Jonathan; Caffrey, Orla; Pham, Clarabelle; Grieve, Richard; Ben-Tovim, David; Hakendorf, Paul; Crotty, Maria

2013-06-01

Cost-effectiveness analysis is well established for pharmaceuticals and medical technologies but not for evaluating variations in clinical practice. This paper describes a novel methodology--risk adjusted cost-effectiveness (RAC-E)--that facilitates the comparative evaluation of applied clinical practice processes. In this application, risk adjustment is undertaken with a multivariate matching algorithm that balances the baseline characteristics of patients attending different settings (e.g., hospitals). Linked, routinely collected data are used to analyse patient-level costs and outcomes over a 2-year period, as well as to extrapolate costs and survival over patient lifetimes. The study reports the relative cost-effectiveness of alternative forms of clinical practice, including a full representation of the statistical uncertainty around the mean estimates. The methodology is illustrated by a case study that evaluates the relative cost-effectiveness of services for patients presenting with acute chest pain across the four main public hospitals in South Australia. The evaluation finds that services provided at two hospitals were dominated, and of the remaining services, the more effective hospital gained life years at a low mean additional cost and had an 80% probability of being the most cost-effective hospital at realistic cost-effectiveness thresholds. Potential determinants of the estimated variation in costs and effects were identified, although more detailed analyses to identify specific areas of variation in clinical practice are required to inform improvements at the less cost-effective institutions. Copyright © 2012 John Wiley & Sons, Ltd.

Healthcare tariffs for specialist inpatient neurorehabilitation services: rationale and development of a UK casemix and costing methodology.

PubMed

Turner-Stokes, Lynne; Sutch, Stephen; Dredge, Robert

2012-03-01

To describe the rationale and development of a casemix model and costing methodology for tariff development for specialist neurorehabilitation services in the UK. Patients with complex needs incur higher treatment costs. Fair payment should be weighted in proportion to costs of providing treatment, and should allow for variation over time CASEMIX MODEL AND BAND-WEIGHTING: Case complexity is measured by the Rehabilitation Complexity Scale (RCS). Cases are divided into five bands of complexity, based on the total RCS score. The principal determinant of costs in rehabilitation is staff time. Total staff hours/week (estimated from the Northwick Park Nursing and Therapy Dependency Scales) are analysed within each complexity band, through cross-sectional analysis of parallel ratings. A 'band-weighting' factor is derived from the relative proportions of staff time within each of the five bands. Total unit treatment costs are obtained from retrospective analysis of provider hospitals' budget and accounting statements. Mean bed-day costs (total unit cost/occupied bed days) are divided broadly into 'variable' and 'non-variable' components. In the weighted costing model, the band-weighting factor is applied to the variable portion of the bed-day cost to derive a banded cost, and thence a set of cost-multipliers. Preliminary data from one unit are presented to illustrate how this weighted costing model will be applied to derive a multilevel banded payment model, based on serial complexity ratings, to allow for change over time.

Comparing the Medicaid Retrospective Drug Utilization Review Program Cost-Savings Methods Used by State Agencies

PubMed Central

Prada, Sergio I.

2017-01-01

Background The Medicaid Drug Utilization Review (DUR) program is a 2-phase process conducted by Medicaid state agencies. The first phase is a prospective DUR and involves electronically monitoring prescription drug claims to identify prescription-related problems, such as therapeutic duplication, contraindications, incorrect dosage, or duration of treatment. The second phase is a retrospective DUR and involves ongoing and periodic examinations of claims data to identify patterns of fraud, abuse, underutilization, drug–drug interaction, or medically unnecessary care, implementing corrective actions when needed. The Centers for Medicare & Medicaid Services requires each state to measure prescription drug cost-savings generated from its DUR programs on an annual basis, but it provides no guidance or unified methodology for doing so. Objectives To describe and synthesize the methodologies used by states to measure cost-savings using their Medicaid retrospective DUR program in federal fiscal years 2014 and 2015. Method For each state, the cost-savings methodologies included in the Medicaid DUR 2014 and 2015 reports were downloaded from Medicaid's website. The reports were then reviewed and synthesized. Methods described by the states were classified according to research designs often described in evaluation textbooks. Discussion In 2014, the most often used prescription drugs cost-savings estimation methodology for the Medicaid retrospective DUR program was a simple pre-post intervention method, without a comparison group (ie, 12 states). In 2015, the most common methodology used was a pre-post intervention method, with a comparison group (ie, 14 states). Comparisons of savings attributed to the program among states are still unreliable, because of a lack of a common methodology available for measuring cost-savings. Conclusion There is great variation among states in the methods used to measure prescription drug utilization cost-savings. This analysis suggests that there is still room for improvement in terms of methodology transparency, which is important, because lack of transparency hinders states from learning from each other. Ultimately, the federal government needs to evaluate and improve its DUR program. PMID:29403573

Step-by-step guideline for disease-specific costing studies in low- and middle-income countries: a mixed methodology

PubMed Central

Hendriks, Marleen E.; Kundu, Piyali; Boers, Alexander C.; Bolarinwa, Oladimeji A.; te Pas, Mark J.; Akande, Tanimola M.; Agbede, Kayode; Gomez, Gabriella B.; Redekop, William K.; Schultsz, Constance; Tan, Siok Swan

2014-01-01

Background Disease-specific costing studies can be used as input into cost-effectiveness analyses and provide important information for efficient resource allocation. However, limited data availability and limited expertise constrain such studies in low- and middle-income countries (LMICs). Objective To describe a step-by-step guideline for conducting disease-specific costing studies in LMICs where data availability is limited and to illustrate how the guideline was applied in a costing study of cardiovascular disease prevention care in rural Nigeria. Design The step-by-step guideline provides practical recommendations on methods and data requirements for six sequential steps: 1) definition of the study perspective, 2) characterization of the unit of analysis, 3) identification of cost items, 4) measurement of cost items, 5) valuation of cost items, and 6) uncertainty analyses. Results We discuss the necessary tradeoffs between the accuracy of estimates and data availability constraints at each step and illustrate how a mixed methodology of accurate bottom-up micro-costing and more feasible approaches can be used to make optimal use of all available data. An illustrative example from Nigeria is provided. Conclusions An innovative, user-friendly guideline for disease-specific costing in LMICs is presented, using a mixed methodology to account for limited data availability. The illustrative example showed that the step-by-step guideline can be used by healthcare professionals in LMICs to conduct feasible and accurate disease-specific cost analyses. PMID:24685170

77 FR 59348 - Revisions to Page 700 of FERC Form No. 6

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

.... The components of an oil pipeline's rate base are governed by the Trended Original Cost Methodology... ratemaking methodology to the Trended Original Cost methodology as adopted in Opinion 154-B. The SRB was to... trended original cost methodology divides the nominal return on equity component of the cost of service...

Integrating cost information with health management support system: an enhanced methodology to assess health care quality drivers.

PubMed

Kohli, R; Tan, J K; Piontek, F A; Ziege, D E; Groot, H

1999-08-01

Changes in health care delivery, reimbursement schemes, and organizational structure have required health organizations to manage the costs of providing patient care while maintaining high levels of clinical and patient satisfaction outcomes. Today, cost information, clinical outcomes, and patient satisfaction results must become more fully integrated if strategic competitiveness and benefits are to be realized in health management decision making, especially in multi-entity organizational settings. Unfortunately, traditional administrative and financial systems are not well equipped to cater to such information needs. This article presents a framework for the acquisition, generation, analysis, and reporting of cost information with clinical outcomes and patient satisfaction in the context of evolving health management and decision-support system technology. More specifically, the article focuses on an enhanced costing methodology for determining and producing improved, integrated cost-outcomes information. Implementation issues and areas for future research in cost-information management and decision-support domains are also discussed.

Cost-effectiveness analyses and their role in improving healthcare strategies.

PubMed

Rodriguez, Maria I; Caughey, Aaron B

2013-12-01

In this era of healthcare reform, attention is focused on increasing the quality of care and access to services, while simultaneously reducing the cost. Economic evaluations can play an important role in translating research to evidence-based practice and policy. Cost-effectiveness analysis (CEA) and its utility for clinical and policy decision making among U.S. obstetricians and gynecologists is reviewed. Three case examples demonstrating the value of this methodology in decision making are considered. A discussion of the methodologic principles of CEA, the advantages, and the limitations of the methodology are presented. CEA can play an important role in evidence-based decision making, with value for clinicians and policy makers alike. These studies are of particular interest in the field of obstetrics and gynecology, in which uncertainty from epidemiologic or clinical trials exists, or multiple perspectives need to be considered (maternal, neonatal, and societal). As with all research, it is essential that economic evaluations are conducted according to established methodologic standards. Interpretation and application of results should occur with a clear understanding of both the value and the limitations of economic evaluations.

Increased energy efficiency of a steel foundry plant by using a cleaner production quick-E-scan methodology

NASA Astrophysics Data System (ADS)

Rasmeni, Zelda; Pan, Xiaowei

2017-07-01

The Quick-E-Scan methodology is a simple and quick method that is used to achieve operational energy efficiency as opposed to detailed energy audits, which therefore offers a no cost or less cost solutions for energy management programs with a limited budget. The quick-E-scan methodology was used to assesses a steel foundry plant based in Benoni through dividing the foundry into production sections which entailed a review of the current processes and usage patterns of energy within the plant and a detailed analysis of options available for improvement and profitable areas in which energy saving measures may be implemented for an increase energy efficiency which can be presented to management of the company.

Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Y. H.; Jenne, D. S.; Thresher, R.

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversionmore » chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.« less

An integrative cross-design synthesis approach to estimate the cost of illness: an applied case to the cost of depression in Catalonia.

PubMed

Bendeck, Murielle; Serrano-Blanco, Antoni; García-Alonso, Carlos; Bonet, Pere; Jordà, Esther; Sabes-Figuera, Ramon; Salvador-Carulla, Luis

2013-04-01

Cost of illness (COI) studies are carried out under conditions of uncertainty and with incomplete information. There are concerns regarding their generalisability, accuracy and usability in evidence-informed care. A hybrid methodology is used to estimate the regional costs of depression in Catalonia (Spain) following an integrative approach. The cross-design synthesis included nominal groups and quantitative analysis of both top-down and bottom-up studies, and incorporated primary and secondary data from different sources of information in Catalonia. Sensitivity analysis used probabilistic Monte Carlo simulation modelling. A dissemination strategy was planned, including a standard form adapted from cost-effectiveness studies to summarise methods and results. The method used allows for a comprehensive estimate of the cost of depression in Catalonia. Health officers and decision-makers concluded that this methodology provided useful information and knowledge for evidence-informed planning in mental health. The mix of methods, combined with a simulation model, contributed to a reduction in data gaps and, in conditions of uncertainty, supplied more complete information on the costs of depression in Catalonia. This approach to COI should be differentiated from other COI designs to allow like-with-like comparisons. A consensus on COI typology, procedures and dissemination is needed.

A Model for Oil-Gas Pipelines Cost Prediction Based on a Data Mining Process

NASA Astrophysics Data System (ADS)

Batzias, Fragiskos A.; Spanidis, Phillip-Mark P.

2009-08-01

This paper addresses the problems associated with the cost estimation of oil/gas pipelines during the elaboration of feasibility assessments. Techno-economic parameters, i.e., cost, length and diameter, are critical for such studies at the preliminary design stage. A methodology for the development of a cost prediction model based on Data Mining (DM) process is proposed. The design and implementation of a Knowledge Base (KB), maintaining data collected from various disciplines of the pipeline industry, are presented. The formulation of a cost prediction equation is demonstrated by applying multiple regression analysis using data sets extracted from the KB. Following the methodology proposed, a learning context is inductively developed as background pipeline data are acquired, grouped and stored in the KB, and through a linear regression model provide statistically substantial results, useful for project managers or decision makers.

Variations in cost calculations in spine surgery cost-effectiveness research.

PubMed

Alvin, Matthew D; Miller, Jacob A; Lubelski, Daniel; Rosenbaum, Benjamin P; Abdullah, Kalil G; Whitmore, Robert G; Benzel, Edward C; Mroz, Thomas E

2014-06-01

Cost-effectiveness research in spine surgery has been a prominent focus over the last decade. However, there has yet to be a standardized method developed for calculation of costs in such studies. This lack of a standardized costing methodology may lead to conflicting conclusions on the cost-effectiveness of an intervention for a specific diagnosis. The primary objective of this study was to systematically review all cost-effectiveness studies published on spine surgery and compare and contrast various costing methodologies used. The authors performed a systematic review of the cost-effectiveness literature related to spine surgery. All cost-effectiveness analyses pertaining to spine surgery were identified using the cost-effectiveness analysis registry database of the Tufts Medical Center Institute for Clinical Research and Health Policy, and the MEDLINE database. Each article was reviewed to determine the study subject, methodology, and results. Data were collected from each study, including costs, interventions, cost calculation method, perspective of cost calculation, and definitions of direct and indirect costs if available. Thirty-seven cost-effectiveness studies on spine surgery were included in the present study. Twenty-seven (73%) of the studies involved the lumbar spine and the remaining 10 (27%) involved the cervical spine. Of the 37 studies, 13 (35%) used Medicare reimbursements, 12 (32%) used a case-costing database, 3 (8%) used cost-to-charge ratios (CCRs), 2 (5%) used a combination of Medicare reimbursements and CCRs, 3 (8%) used the United Kingdom National Health Service reimbursement system, 2 (5%) used a Dutch reimbursement system, 1 (3%) used the United Kingdom Department of Health data, and 1 (3%) used the Tricare Military Reimbursement system. Nineteen (51%) studies completed their cost analysis from the societal perspective, 11 (30%) from the hospital perspective, and 7 (19%) from the payer perspective. Of those studies with a societal perspective, 14 (38%) reported actual indirect costs. Changes in cost have a direct impact on the value equation for concluding whether an intervention is cost-effective. It is essential to develop a standardized, accurate means of calculating costs. Comparability and transparency are essential, such that studies can be compared properly and policy makers can be appropriately informed when making decisions for our health care system based on the results of these studies.

10 CFR 455.64 - Life-cycle cost methodology.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Life-cycle cost methodology. 455.64 Section 455.64 Energy..., Hospitals, Units of Local Government, and Public Care Institutions § 455.64 Life-cycle cost methodology. (a) The life-cycle cost methodology under § 455.63(b) of this part is a systematic comparison of the...

10 CFR 455.64 - Life-cycle cost methodology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Life-cycle cost methodology. 455.64 Section 455.64 Energy..., Hospitals, Units of Local Government, and Public Care Institutions § 455.64 Life-cycle cost methodology. (a) The life-cycle cost methodology under § 455.63(b) of this part is a systematic comparison of the...

Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

1997-12-01

Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite mission concepts.

Cost collection and analysis for health economic evaluation.

PubMed

Smith, Kristine A; Rudmik, Luke

2013-08-01

To improve the understanding of common health care cost collection, estimation, analysis, and reporting methodologies. Ovid MEDLINE (1947 to December 2012), Cochrane Central register of Controlled Trials, Database of Systematic Reviews, Health Technology Assessment, and National Health Service Economic Evaluation Database. This article discusses the following cost collection methods: defining relevant resources, quantification of consumed resources, and resource valuation. It outlines the recommendations for cost reporting in economic evaluations and reviews the techniques on how to handle cost data uncertainty. Last, it discusses the controversial topics of future costs and patient productivity losses. Health care cost collection and estimation can be challenging, and an organized approach is required to optimize accuracy of economic evaluation outcomes. Understanding health care cost collection and estimation techniques will improve both critical appraisal and development of future economic evaluations.

Lost productivity due to premature mortality in developed and emerging countries: an application to smoking cessation.

PubMed

Menzin, Joseph; Marton, Jeno P; Menzin, Jordan A; Willke, Richard J; Woodward, Rebecca M; Federico, Victoria

2012-06-25

Researchers and policy makers have determined that accounting for productivity costs, or "indirect costs," may be as important as including direct medical expenditures when evaluating the societal value of health interventions. These costs are also important when estimating the global burden of disease. The estimation of indirect costs is commonly done on a country-specific basis. However, there are few studies that evaluate indirect costs across countries using a consistent methodology. Using the human capital approach, we developed a model that estimates productivity costs as the present value of lifetime earnings (PVLE) lost due to premature mortality. Applying this methodology, the model estimates productivity costs for 29 selected countries, both developed and emerging. We also provide an illustration of how the inclusion of productivity costs contributes to an analysis of the societal burden of smoking. A sensitivity analysis is undertaken to assess productivity costs on the basis of the friction cost approach. PVLE estimates were higher for certain subpopulations, such as men, younger people, and people in developed countries. In the case study, productivity cost estimates from our model showed that productivity loss was a substantial share of the total cost burden of premature mortality due to smoking, accounting for over 75 % of total lifetime costs in the United States and 67 % of total lifetime costs in Brazil. Productivity costs were much lower using the friction cost approach among those of working age. Our PVLE model is a novel tool allowing researchers to incorporate the value of lost productivity due to premature mortality into economic analyses of treatments for diseases or health interventions. We provide PVLE estimates for a number of emerging and developed countries. Including productivity costs in a health economics study allows for a more comprehensive analysis, and, as demonstrated by our illustration, can have important effects on the results and conclusions.

Lost productivity due to premature mortality in developed and emerging countries: an application to smoking cessation

PubMed Central

2012-01-01

Background Researchers and policy makers have determined that accounting for productivity costs, or “indirect costs,” may be as important as including direct medical expenditures when evaluating the societal value of health interventions. These costs are also important when estimating the global burden of disease. The estimation of indirect costs is commonly done on a country-specific basis. However, there are few studies that evaluate indirect costs across countries using a consistent methodology. Methods Using the human capital approach, we developed a model that estimates productivity costs as the present value of lifetime earnings (PVLE) lost due to premature mortality. Applying this methodology, the model estimates productivity costs for 29 selected countries, both developed and emerging. We also provide an illustration of how the inclusion of productivity costs contributes to an analysis of the societal burden of smoking. A sensitivity analysis is undertaken to assess productivity costs on the basis of the friction cost approach. Results PVLE estimates were higher for certain subpopulations, such as men, younger people, and people in developed countries. In the case study, productivity cost estimates from our model showed that productivity loss was a substantial share of the total cost burden of premature mortality due to smoking, accounting for over 75 % of total lifetime costs in the United States and 67 % of total lifetime costs in Brazil. Productivity costs were much lower using the friction cost approach among those of working age. Conclusions Our PVLE model is a novel tool allowing researchers to incorporate the value of lost productivity due to premature mortality into economic analyses of treatments for diseases or health interventions. We provide PVLE estimates for a number of emerging and developed countries. Including productivity costs in a health economics study allows for a more comprehensive analysis, and, as demonstrated by our illustration, can have important effects on the results and conclusions. PMID:22731620

The importance of operations, risk, and cost assessment to space transfer systems design

NASA Technical Reports Server (NTRS)

Ball, J. M.; Komerska, R. J.; Rowell, L. F.

1992-01-01

This paper examines several methodologies which contribute to comprehensive subsystem cost estimation. The example of a space-based lunar space transfer vehicle (STV) design is used to illustrate how including both primary and secondary factors into cost affects the decision of whether to use aerobraking or propulsion for earth orbit capture upon lunar return. The expected dominant cost factor in this decision is earth-to-orbit launch cost driven by STV mass. However, to quantify other significant cost factors, this cost comparison included a risk analysis to identify development and testing costs, a Taguchi design of experiments to determine a minimum mass aerobrake design, and a detailed operations analysis. As a result, the predicted cost advantage of aerobraking, while still positive, was subsequently reduced by about 30 percent compared to the simpler mass-based cost estimates.

Cost of diabetic eye, renal and foot complications: a methodological review.

PubMed

Schirr-Bonnans, Solène; Costa, Nadège; Derumeaux-Burel, Hélène; Bos, Jérémy; Lepage, Benoît; Garnault, Valérie; Martini, Jacques; Hanaire, Hélène; Turnin, Marie-Christine; Molinier, Laurent

2017-04-01

Diabetic retinopathy (DR), diabetic kidney disease (DKD) and diabetic foot ulcer (DFU) represent a public health and economic concern that may be assessed with cost-of-illness (COI) studies. (1) To review COI studies published between 2000 and 2015, about DR, DKD and DFU; (2) to analyse methods used. Disease definition, epidemiological approach, perspective, type of costs, activity data sources, cost valuation, sensitivity analysis, cost discounting and presentation of costs may be described in COI studies. Each reviewed study was assessed with a methodological grid including these nine items. The five following items have been detailed in the reviewed studies: epidemiological approach (59 % of studies described it), perspective (75 %), type of costs (98 %), activity data sources (91 %) and cost valuation (59 %). The disease definition and the presentation of results were detailed in fewer studies (respectively 50 and 46 %). In contrast, sensitivity analysis was only performed in 14 % of studies and cost discounting in 7 %. Considering the studies showing an average cost per patient and per year with a societal perspective, DR cost estimates were US $2297 (range 5-67,486), DKD cost ranged from US $1095 to US $16,384, and DFU cost was US $10,604 (range 1444-85,718). This review reinforces the need to adequately describe the method to facilitate literature comparisons and projections. It also recalls that COI studies represent complementary tools to cost-effectiveness studies to help decision makers in the allocation of economic resources for the management of DR, DKD and DFU.

Life cycle cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1993-01-01

This paper documents progress to date by the University of Dayton on the development of a life cycle cost model for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of a life cycle cost model. Cost categories are initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. The focus will be on operations and maintenance costs and other recurring costs. Secondary tasks performed concurrent with the development of the life cycle costing model include continual support and upgrade of the R&M model. The primary result of the completed research will be a methodology and a computer implementation of the methodology to provide for timely cost analysis in support of the conceptual design activities. The major objectives of this research are: to obtain and to develop improved methods for estimating manpower, spares, software and hardware costs, facilities costs, and other cost categories as identified by NASA personnel; to construct a life cycle cost model of a space transportation system for budget exercises and performance-cost trade-off analysis during the conceptual and development stages; to continue to support modifications and enhancements to the R&M model; and to continue to assist in the development of a simulation model to provide an integrated view of the operations and support of the proposed system.

[Direct costs of medical care for patients with type 2 diabetes mellitus in Mexico micro-costing analysis].

PubMed

Rodríguez Bolaños, Rosibel de Los Ángeles; Reynales Shigematsu, Luz Myriam; Jiménez Ruíz, Jorge Alberto; Juárez Márquezy, Sergio Arturo; Hernández Ávila, Mauricio

2010-12-01

Estimate the direct cost of medical care incurred by the Mexican Social Security Institute (IMSS, Instituto Mexicano del Seguro Social) for patients with type 2 diabetes mellitus (DM2). The clinical files of 497 patients who were treated in secondary and tertiary medical care units in 2002-2004 were reviewed. Costs were quantified using a disease costing approach (DCA) from the provider's perspective, a micro-costing technique, and a bottom-up methodology. Average annual costs by diagnosis, complication, and total cost were estimated. Total IMSS DM2 annual costs were US$452 064 988, or 3.1% of operating expenses. The annual average cost per patient was US$3 193.75, with US$2 740.34 per patient without complications and US$3 550.17 per patient with complications. Hospitalization and intensive care bed-days generated the greatest expenses. The high cost of providing medical care to patients with DM2 and its complications represents an economic burden that health institutions should consider in their budgets to enable them to offer quality service that is both adequate and timely. Using the micro-costing methodology allows an approximation to real data on utilization and management of the disease.

The methodological quality of health economic evaluations for the management of hip fractures: A systematic review of the literature.

PubMed

Sabharwal, Sanjeeve; Carter, Alexander; Darzi, Lord Ara; Reilly, Peter; Gupte, Chinmay M

2015-06-01

Approximately 76,000 people a year sustain a hip fracture in the UK and the estimated cost to the NHS is £1.4 billion a year. Health economic evaluations (HEEs) are one of the methods employed by decision makers to deliver healthcare policy supported by clinical and economic evidence. The objective of this study was to (1) identify and characterize HEEs for the management of patients with hip fractures, and (2) examine their methodological quality. A literature search was performed in MEDLINE, EMBASE and the NHS Economic Evaluation Database. Studies that met the specified definition for a HEE and evaluated hip fracture management were included. Methodological quality was assessed using the Consensus on Health Economic Criteria (CHEC). Twenty-seven publications met the inclusion criteria of this study and were included in our descriptive and methodological analysis. Domains of methodology that performed poorly included use of an appropriate time horizon (66.7% of studies), incremental analysis of costs and outcomes (63%), future discounting (44.4%), sensitivity analysis (40.7%), declaration of conflicts of interest (37%) and discussion of ethical considerations (29.6%). HEEs for patients with hip fractures are increasing in publication in recent years. Most of these studies fail to adopt a societal perspective and key aspects of their methodology are poor. The development of future HEEs in this field must adhere to established principles of methodology, so that better quality research can be used to inform health policy on the management of patients with a hip fracture. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

[Costing nuclear medicine diagnostic procedures].

PubMed

Markou, Pavlos

2005-01-01

To the Editor: Referring to a recent special report about the cost analysis of twenty-nine nuclear medicine procedures, I would like to clarify some basic aspects for determining costs of nuclear medicine procedure with various costing methodologies. Activity Based Costing (ABC) method, is a new approach in imaging services costing that can provide the most accurate cost data, but is difficult to perform in nuclear medicine diagnostic procedures. That is because ABC requires determining and analyzing all direct and indirect costs of each procedure, according all its activities. Traditional costing methods, like those for estimating incomes and expenses per procedure or fixed and variable costs per procedure, which are widely used in break-even point analysis and the method of ratio-of-costs-to-charges per procedure may be easily performed in nuclear medicine departments, to evaluate the variability and differences between costs and reimbursement - charges.

Application of Bayesian and cost benefit risk analysis in water resources management

NASA Astrophysics Data System (ADS)

Varouchakis, E. A.; Palogos, I.; Karatzas, G. P.

2016-03-01

Decision making is a significant tool in water resources management applications. This technical note approaches a decision dilemma that has not yet been considered for the water resources management of a watershed. A common cost-benefit analysis approach, which is novel in the risk analysis of hydrologic/hydraulic applications, and a Bayesian decision analysis are applied to aid the decision making on whether or not to construct a water reservoir for irrigation purposes. The alternative option examined is a scaled parabolic fine variation in terms of over-pumping violations in contrast to common practices that usually consider short-term fines. The methodological steps are analytically presented associated with originally developed code. Such an application, and in such detail, represents new feedback. The results indicate that the probability uncertainty is the driving issue that determines the optimal decision with each methodology, and depending on the unknown probability handling, each methodology may lead to a different optimal decision. Thus, the proposed tool can help decision makers to examine and compare different scenarios using two different approaches before making a decision considering the cost of a hydrologic/hydraulic project and the varied economic charges that water table limit violations can cause inside an audit interval. In contrast to practices that assess the effect of each proposed action separately considering only current knowledge of the examined issue, this tool aids decision making by considering prior information and the sampling distribution of future successful audits.

Cost accounting methodologies in price setting of acute inpatient services in Hungary.

PubMed

Gaal, Peter; Stefka, Nóra; Nagy, Júlia

2006-08-01

On the basis of documentary analysis and interviews with decision makers, this paper discusses the cost accounting methodologies used for price setting of inpatient services in the Hungarian health care system focusing on sector of acute inpatient care, which is financed through the Hungarian adaptation of Diagnosis Related Groups since 1993. Hungary has a quite sophisticated DRG system, which had a deep impact on the efficiency of the acute inpatient care sector. Nevertheless, the system requires continuous maintenance, where the cooperation of hospitals, as well as the minimisation of political influence are critical success factors.

Accounting for the drug life cycle and future drug prices in cost-effectiveness analysis.

PubMed

Hoyle, Martin

2011-01-01

Economic evaluations of health technologies typically assume constant real drug prices and model only the cohort of patients currently eligible for treatment. It has recently been suggested that, in the UK, we should assume that real drug prices decrease at 4% per annum and, in New Zealand, that real drug prices decrease at 2% per annum and at patent expiry the drug price falls. It has also recently been suggested that we should model multiple future incident cohorts. In this article, the cost effectiveness of drugs is modelled based on these ideas. Algebraic expressions are developed to capture all costs and benefits over the entire life cycle of a new drug. The lifetime of a new drug in the UK, a key model parameter, is estimated as 33 years, based on the historical lifetime of drugs in England over the last 27 years. Under the proposed methodology, cost effectiveness is calculated for seven new drugs recently appraised in the UK. Cost effectiveness as assessed in the future is also estimated. Whilst the article is framed in mathematics, the findings and recommendations are also explained in non-mathematical language. The 'life-cycle correction factor' is introduced, which is used to convert estimates of cost effectiveness as traditionally calculated into estimates under the proposed methodology. Under the proposed methodology, all seven drugs appear far more cost effective in the UK than published. For example, the incremental cost-effectiveness ratio decreases by 46%, from £61, 900 to £33, 500 per QALY, for cinacalcet versus best supportive care for end-stage renal disease, and by 45%, from £31,100 to £17,000 per QALY, for imatinib versus interferon-α for chronic myeloid leukaemia. Assuming real drug prices decrease over time, the chance that a drug is publicly funded increases over time, and is greater when modelling multiple cohorts than with a single cohort. Using the methodology (compared with traditional methodology) all drugs in the UK and New Zealand are predicted to be more cost effective. It is suggested that the willingness-to-pay threshold should be reduced in the UK and New Zealand. The ranking of cost effectiveness will change with drugs assessed as relatively more cost effective and medical devices and surgical procedures relatively less cost effective than previously thought. The methodology is very simple to implement. It is suggested that the model should be parameterized for other countries.

Automating Risk Analysis of Software Design Models

PubMed Central

Ruiz, Guifré; Heymann, Elisa; César, Eduardo; Miller, Barton P.

2014-01-01

The growth of the internet and networked systems has exposed software to an increased amount of security threats. One of the responses from software developers to these threats is the introduction of security activities in the software development lifecycle. This paper describes an approach to reduce the need for costly human expertise to perform risk analysis in software, which is common in secure development methodologies, by automating threat modeling. Reducing the dependency on security experts aims at reducing the cost of secure development by allowing non-security-aware developers to apply secure development with little to no additional cost, making secure development more accessible. To automate threat modeling two data structures are introduced, identification trees and mitigation trees, to identify threats in software designs and advise mitigation techniques, while taking into account specification requirements and cost concerns. These are the components of our model for automated threat modeling, AutSEC. We validated AutSEC by implementing it in a tool based on data flow diagrams, from the Microsoft security development methodology, and applying it to VOMS, a grid middleware component, to evaluate our model's performance. PMID:25136688

Automating risk analysis of software design models.

PubMed

Frydman, Maxime; Ruiz, Guifré; Heymann, Elisa; César, Eduardo; Miller, Barton P

2014-01-01

The growth of the internet and networked systems has exposed software to an increased amount of security threats. One of the responses from software developers to these threats is the introduction of security activities in the software development lifecycle. This paper describes an approach to reduce the need for costly human expertise to perform risk analysis in software, which is common in secure development methodologies, by automating threat modeling. Reducing the dependency on security experts aims at reducing the cost of secure development by allowing non-security-aware developers to apply secure development with little to no additional cost, making secure development more accessible. To automate threat modeling two data structures are introduced, identification trees and mitigation trees, to identify threats in software designs and advise mitigation techniques, while taking into account specification requirements and cost concerns. These are the components of our model for automated threat modeling, AutSEC. We validated AutSEC by implementing it in a tool based on data flow diagrams, from the Microsoft security development methodology, and applying it to VOMS, a grid middleware component, to evaluate our model's performance.

National Launch System comparative economic analysis

NASA Technical Reports Server (NTRS)

Prince, A.

1992-01-01

Results are presented from an analysis of economic benefits (or losses), in the form of the life cycle cost savings, resulting from the development of the National Launch System (NLS) family of launch vehicles. The analysis was carried out by comparing various NLS-based architectures with the current Shuttle/Titan IV fleet. The basic methodology behind this NLS analysis was to develop a set of annual payload requirements for the Space Station Freedom and LEO, to design launch vehicle architectures around these requirements, and to perform life-cycle cost analyses on all of the architectures. A SEI requirement was included. Launch failure costs were estimated and combined with the relative reliability assumptions to measure the effects of losses. Based on the analysis, a Shuttle/NLS architecture evolving into a pressurized-logistics-carrier/NLS architecture appears to offer the best long-term cost benefit.

Opportunity cost based analysis of corporate eco-efficiency: a methodology and its application to the CO2-efficiency of German companies.

PubMed

Hahn, Tobias; Figge, Frank; Liesen, Andrea; Barkemeyer, Ralf

2010-10-01

In this paper, we propose the return-to-cost-ratio (RCR) as an alternative approach to the analysis of operational eco-efficiency of companies based on the notion of opportunity costs. RCR helps to overcome two fundamental deficits of existing approaches to eco-efficiency. (1) It translates eco-efficiency into managerial terms by applying the well-established notion of opportunity costs to eco-efficiency analysis. (2) RCR allows to identify and quantify the drivers behind changes in corporate eco-efficiency. RCR is applied to the analysis of the CO(2)-efficiency of German companies in order to illustrate its usefulness for a detailed analysis of changes in corporate eco-efficiency as well as for the development of effective environmental strategies. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Valuing Non-CO2 GHG Emission Changes in Benefit-Cost ...

EPA Pesticide Factsheets

The climate impacts of greenhouse gas (GHG) emissions impose social costs on society. To date, EPA has not had an approach to estimate the economic benefits of reducing emissions of non-CO2 GHGs (or the costs of increasing them) that is consistent with the methodology underlying the U.S. Government’s current estimates of the social cost of carbon (SCC). A recently published paper presents estimates of the social cost of methane that are consistent with the SCC estimates. The Agency is seeking review of the potential application of these new benefit estimates to benefit cost analysis in relation to current practice in this area. The goal of this project is to improve upon the current treatment of non-CO2 GHG emission impacts in benefit-cost analysis.

How can activity-based costing methodology be performed as a powerful tool to calculate costs and secure appropriate patient care?

PubMed

Lin, Blossom Yen-Ju; Chao, Te-Hsin; Yao, Yuh; Tu, Shu-Min; Wu, Chun-Ching; Chern, Jin-Yuan; Chao, Shiu-Hsiung; Shaw, Keh-Yuong

2007-04-01

Previous studies have shown the advantages of using activity-based costing (ABC) methodology in the health care industry. The potential values of ABC methodology in health care are derived from the more accurate cost calculation compared to the traditional step-down costing, and the potentials to evaluate quality or effectiveness of health care based on health care activities. This project used ABC methodology to profile the cost structure of inpatients with surgical procedures at the Department of Colorectal Surgery in a public teaching hospital, and to identify the missing or inappropriate clinical procedures. We found that ABC methodology was able to accurately calculate costs and to identify several missing pre- and post-surgical nursing education activities in the course of treatment.

How Root Cause Analysis Can Improve the Value Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wixson, James Robert

2002-05-01

Root cause analysis (RCA) is an important methodology that can be integrated with the VE Job Plan to generate superior results from the VE Methodology. The point at which RCA is most appropriate is after the function analysis and FAST Model have been built and functions for improvement have been chosen. These functions are then subjected to a simple, but, rigorous RCA to get to the root cause of their deficiencies, whether it is high cost/poor value, poor quality, or poor reliability. Once the most probable causes for these problems have been arrived at, better solutions for improvement can bemore » developed in the creativity phase because the team better understands the problems associated with these functions.« less

The economic burden of physical inactivity: a systematic review and critical appraisal.

PubMed

Ding, Ding; Kolbe-Alexander, Tracy; Nguyen, Binh; Katzmarzyk, Peter T; Pratt, Michael; Lawson, Kenny D

2017-10-01

To summarise the literature on the economic burden of physical inactivity in populations, with emphases on appraising the methodologies and providing recommendations for future studies. Systematic review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines (PROSPERO registration number CRD42016047705). Electronic databases for peer-reviewed and grey literature were systematically searched, followed by reference searching and consultation with experts. Studies that examined the economic consequences of physical inactivity in a population/population-based sample, with clearly stated methodologies and at least an abstract/summary written in English. Of the 40 eligible studies, 27 focused on direct healthcare costs only, 13 also estimated indirect costs and one study additionally estimated household costs. For direct costs, 23 studies used a population attributable fraction (PAF) approach with estimated healthcare costs attributable to physical inactivity ranging from 0.3% to 4.6% of national healthcare expenditure; 17 studies used an econometric approach, which tended to yield higher estimates than those using a PAF approach. For indirect costs, 10 studies used a human capital approach, two used a friction cost approach and one used a value of a statistical life approach. Overall, estimates varied substantially, even within the same country, depending on analytical approaches, time frame and other methodological considerations. Estimating the economic burden of physical inactivity is an area of increasing importance that requires further development. There is a marked lack of consistency in methodological approaches and transparency of reporting. Future studies could benefit from cross-disciplinary collaborations involving economists and physical activity experts, taking a societal perspective and following best practices in conducting and reporting analysis, including accounting for potential confounding, reverse causality and comorbidity, applying discounting and sensitivity analysis, and reporting assumptions, limitations and justifications for approaches taken. We have adapted the Consolidated Health Economic Evaluation Reporting Standards checklist as a guide for future estimates of the economic burden of physical inactivity and other risk factors. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and

Science.gov Websites

Center: Vehicle Cost Calculator Assumptions and Methodology on Facebook Tweet about Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Twitter Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Google Bookmark Alternative Fuels

A systematic review of health economic evaluations of vaccines in Brazil.

PubMed

Sartori, Ana Marli Christovam; Rozman, Luciana Martins; Decimoni, Tassia Cristina; Leandro, Roseli; Novaes, Hillegonda Maria Dutilh; de Soárez, Patrícia Coelho

2017-06-03

In Brazil, since 2005, the Ministry of Health requires Health Economic Evaluation (HEE) of vaccines for introduction into the National Immunization Program. To describe and analyze the full HEE on vaccines conducted in Brazil from 1980 to 2013. Systematic review of the literature. We searched multiple databases. Two researchers independently selected the studies and extracted the data. The methodological quality of individual studies was evaluated using CHEERS items. Twenty studies were reviewed. The most evaluated vaccines were pneumococcal (25%) and HPV (15%). The most used types of HEE were cost-effectiveness analysis (45%) and cost-utility analysis (20%). The research question and compared strategies were stated in all 20 studies and the target population was clear in 95%. Nevertheless, many studies did not inform the perspective of analysis or data sources. HEE of vaccines in Brazil has increased since 2008. However, the studies still have methodological deficiencies.

A systematic review of health economic evaluations of vaccines in Brazil

PubMed Central

2017-01-01

ABSTRACT Background: In Brazil, since 2005, the Ministry of Health requires Health Economic Evaluation (HEE) of vaccines for introduction into the National Immunization Program. Objectives: To describe and analyze the full HEE on vaccines conducted in Brazil from 1980 to 2013. Methods: Systematic review of the literature. We searched multiple databases. Two researchers independently selected the studies and extracted the data. The methodological quality of individual studies was evaluated using CHEERS items. Results: Twenty studies were reviewed. The most evaluated vaccines were pneumococcal (25%) and HPV (15%). The most used types of HEE were cost-effectiveness analysis (45%) and cost-utility analysis (20%). The research question and compared strategies were stated in all 20 studies and the target population was clear in 95%. Nevertheless, many studies did not inform the perspective of analysis or data sources. Conclusions: HEE of vaccines in Brazil has increased since 2008. However, the studies still have methodological deficiencies. PMID:28129026

Decision support for redesigning wastewater treatment technologies.

PubMed

McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

2014-10-21

This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

Comparative Lifecycle Energy Analysis: Theory and Practice.

ERIC Educational Resources Information Center

Morris, Jeffrey; Canzoneri, Diana

1992-01-01

Explores the position that more energy is conserved through recycling secondary materials than is generated from municipal solid waste incineration. Discusses one component of a lifecycle analysis--a comparison of energy requirements for manufacturing competing products. Includes methodological issues, energy cost estimates, and difficulties…

An activity-based methodology for operations cost analysis

NASA Technical Reports Server (NTRS)

Korsmeyer, David; Bilby, Curt; Frizzell, R. A.

1991-01-01

This report describes an activity-based cost estimation method, proposed for the Space Exploration Initiative (SEI), as an alternative to NASA's traditional mass-based cost estimation method. A case study demonstrates how the activity-based cost estimation technique can be used to identify the operations that have a significant impact on costs over the life cycle of the SEI. The case study yielded an operations cost of $101 billion for the 20-year span of the lunar surface operations for the Option 5a program architecture. In addition, the results indicated that the support and training costs for the missions were the greatest contributors to the annual cost estimates. A cost-sensitivity analysis of the cultural and architectural drivers determined that the length of training and the amount of support associated with the ground support personnel for mission activities are the most significant cost contributors.

Alternative Fuels Data Center: Vehicle Cost Calculator Widget Assumptions

Science.gov Websites

Data Center: Vehicle Cost Calculator Widget Assumptions and Methodology on Facebook Tweet about Alternative Fuels Data Center: Vehicle Cost Calculator Widget Assumptions and Methodology on Twitter Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator Widget Assumptions and Methodology on Google Bookmark

Cost analysis of carbon dioxide concentrators

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

Methodology and cost estimating relationships, for flight-type and prototype CO2 concentrators, have been developed and presented. A validity check was made by comparing the molecular sieves system considered here and that developed for Skylab. The system evaluated here is twice the size of the Skylab system and is also more complex as it desorbs CO2 thermally and stores it in an accumulator. The cost estimates developed were found to be approximately 50 to 70% higher than the actual cost of the Skylab unit.

The Generalized Roy Model and the Cost-Benefit Analysis of Social Programs.

PubMed

Eisenhauer, Philipp; Heckman, James J; Vytlacil, Edward

2015-04-01

The literature on treatment effects focuses on gross benefits from program participation. We extend this literature by developing conditions under which it is possible to identify parameters measuring the cost and net surplus from program participation. Using the generalized Roy model, we nonparametrically identify the cost, benefit, and net surplus of selection into treatment without requiring the analyst to have direct information on the cost. We apply our methodology to estimate the gross benefit and net surplus of attending college.

The Generalized Roy Model and the Cost-Benefit Analysis of Social Programs*

PubMed Central

Eisenhauer, Philipp; Heckman, James J.; Vytlacil, Edward

2015-01-01

The literature on treatment effects focuses on gross benefits from program participation. We extend this literature by developing conditions under which it is possible to identify parameters measuring the cost and net surplus from program participation. Using the generalized Roy model, we nonparametrically identify the cost, benefit, and net surplus of selection into treatment without requiring the analyst to have direct information on the cost. We apply our methodology to estimate the gross benefit and net surplus of attending college. PMID:26709315

A time-driven, activity-based costing methodology for determining the costs of red blood cell transfusion in patients with beta thalassaemia major.

PubMed

Burns, K E; Haysom, H E; Higgins, A M; Waters, N; Tahiri, R; Rushford, K; Dunstan, T; Saxby, K; Kaplan, Z; Chunilal, S; McQuilten, Z K; Wood, E M

2018-04-10

To describe the methodology to estimate the total cost of administration of a single unit of red blood cells (RBC) in adults with beta thalassaemia major in an Australian specialist haemoglobinopathy centre. Beta thalassaemia major is a genetic disorder of haemoglobin associated with multiple end-organ complications and typically requiring lifelong RBC transfusion therapy. New therapeutic agents are becoming available based on advances in understanding of the disorder and its consequences. Assessment of the true total cost of transfusion, incorporating both product and activity costs, is required in order to evaluate the benefits and costs of these new therapies. We describe the bottom-up, time-driven, activity-based costing methodology used to develop process maps to provide a step-by-step outline of the entire transfusion pathway. Detailed flowcharts for each process are described. Direct observations and timing of the process maps document all activities, resources, staff, equipment and consumables in detail. The analysis will include costs associated with performing these processes, including resources and consumables. Sensitivity analyses will be performed to determine the impact of different staffing levels, timings and probabilities associated with performing different tasks. Thirty-one process maps have been developed, with over 600 individual activities requiring multiple timings. These will be used for future detailed cost analyses. Detailed process maps using bottom-up, time-driven, activity-based costing for determining the cost of RBC transfusion in thalassaemia major have been developed. These could be adapted for wider use to understand and compare the costs and complexities of transfusion in other settings. © 2018 British Blood Transfusion Society.

Training the Poor. A Benefit-Cost Analysis of Manpower Programs in the U.S. Antipoverty Program.

ERIC Educational Resources Information Center

Sewell, D. O.

This report critically reviews past benefit-cost studies of manpower programs and offers an alternative methodology for program evaluation. Because of selective admission criteria and a tendency to attribute all income changes to training, previous studies have had an upward bias in measuring the effectiveness of training. This study evaluates a…

A Cost-Benefit Analysis Applied to Example Proposals for Army Training and Education Research

DTIC Science & Technology

2007-10-01

communication are major areas of concern for children with autism (Diagnostic and Statistical Manual of Mental Disorders, American Psychiatric...aids, and the picture exchange communication sys- tem (PECS), can increase the communicative interactions of children with A-34 autism and enable them...integrate R&D propos- als with an analysis methodology to determine their value to the Army. With that in mind , TRADOC may wish to alter the cost or

Documentation of the analysis of the benefits and costs of aeronautical research and technology models, volume 1

NASA Technical Reports Server (NTRS)

Bobick, J. C.; Braun, R. L.; Denny, R. E.

1979-01-01

The analysis of the benefits and costs of aeronautical research and technology (ABC-ART) models are documented. These models were developed by NASA for use in analyzing the economic feasibility of applying advanced aeronautical technology to future civil aircraft. The methodology is composed of three major modules: fleet accounting module, airframe manufacturing module, and air carrier module. The fleet accounting module is used to estimate the number of new aircraft required as a function of time to meet demand. This estimation is based primarily upon the expected retirement age of existing aircraft and the expected change in revenue passenger miles demanded. Fuel consumption estimates are also generated by this module. The airframe manufacturer module is used to analyze the feasibility of the manufacturing the new aircraft demanded. The module includes logic for production scheduling and estimating manufacturing costs. For a series of aircraft selling prices, a cash flow analysis is performed and a rate of return on investment is calculated. The air carrier module provides a tool for analyzing the financial feasibility of an airline purchasing and operating the new aircraft. This module includes a methodology for computing the air carrier direct and indirect operating costs, performing a cash flow analysis, and estimating the internal rate of return on investment for a set of aircraft purchase prices.

Cost analysis of carbon dioxide concentrators

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1972-01-01

A methodology is developed to predict the relevant contributions of the more intangible cost elements encountered in the development of flight-qualified hardware and is used to predict the costs of three carbon dioxide concentration systems. The cost and performance data from Gemini, Skylab, and other programs are utilized as a basis for establishing the cost estimating relationships. The concentration systems analyzed are the molecular sieves C02 concentrator, the hydrogen-depolarized concentrator, and the regenerable solid desiccant concentrator. Besides the cost estimates for each system, their comparative criteria including relative characteristics, operational differences, and development status are considered.

An Alternative Methodological Approach for Cost-Effectiveness Analysis and Decision Making in Genomic Medicine.

PubMed

Fragoulakis, Vasilios; Mitropoulou, Christina; van Schaik, Ron H; Maniadakis, Nikolaos; Patrinos, George P

2016-05-01

Genomic Medicine aims to improve therapeutic interventions and diagnostics, the quality of life of patients, but also to rationalize healthcare costs. To reach this goal, careful assessment and identification of evidence gaps for public health genomics priorities are required so that a more efficient healthcare environment is created. Here, we propose a public health genomics-driven approach to adjust the classical healthcare decision making process with an alternative methodological approach of cost-effectiveness analysis, which is particularly helpful for genomic medicine interventions. By combining classical cost-effectiveness analysis with budget constraints, social preferences, and patient ethics, we demonstrate the application of this model, the Genome Economics Model (GEM), based on a previously reported genome-guided intervention from a developing country environment. The model and the attendant rationale provide a practical guide by which all major healthcare stakeholders could ensure the sustainability of funding for genome-guided interventions, their adoption and coverage by health insurance funds, and prioritization of Genomic Medicine research, development, and innovation, given the restriction of budgets, particularly in developing countries and low-income healthcare settings in developed countries. The implications of the GEM for the policy makers interested in Genomic Medicine and new health technology and innovation assessment are also discussed.

Clinical and cost outcomes of multifactorial, cardiovascular risk management interventions in worksites: a comprehensive review and analysis.

PubMed

Pelletier, K R

1997-12-01

This paper is a critical review of the clinical and cost outcome evaluation studies of multifactorial, comprehensive, cardiovascular risk management programs in worksites. A comprehensive international literature search conducted under the auspices of the National Heart, Lung and Blood Institute identified 17 articles based on 12 studies that examined the clinical outcomes of multifactorial, comprehensive programs. These articles were identified through MEDLINE, manual searches of recent journals, and through direct inquiries to worksite health promotion researchers. All studies were conducted between 1978 and 1995, with 1978 being the date of the first citation of a methodologically rigorous evaluation. Of the 12 research studies, only 8 utilized the worksite as both the unit of assignment and as the unit of analysis. None of the studies analyzed adequately for cost effectiveness. Given this limitation, this review briefly considers the relevant worksite research that has demonstrated cost outcomes. Worksite-based, multifactorial cardiovascular intervention programs reviewed for this article varied widely in the comprehensiveness, intensity, and duration of both the interventions and evaluations. Results from randomized trials suggest that providing opportunities for individualized, cardiovascular risk reduction counseling for high-risk employees within the context of comprehensive programming may be the critical component of an effective worksite intervention. Despite the many limitations of the current methodologies of the 12 studies, the majority of the research to date indicates the following: (1) favorable clinical and cost outcomes; (2) that more recent and more rigorously designed research tends to support rather than refute earlier and less rigorously designed studies; and (3) that rather than interpreting the methodological flaws and diversity as inherently negative, one may consider it as indicative of a robust phenomena evident in many types of worksites, with diverse employees, differing interventions, and varying degrees of methodological sophistication. Results of these studies reviewed provide both cautious optimism about the effectiveness of these worksite programs and insights regarding the essential components and characteristics of successful programs.

Organizational Change Efforts: Methodologies for Assessing Organizational Effectiveness and Program Costs versus Benefits.

ERIC Educational Resources Information Center

Macy, Barry A.; Mirvis, Philip H.

1982-01-01

A standardized methodology for identifying, defining, and measuring work behavior and performance rather than production, and a methodology that estimates the costs and benefits of work innovation are presented for assessing organizational effectiveness and program costs versus benefits in organizational change programs. Factors in a cost-benefit…

Medical cost analysis: application to colorectal cancer data from the SEER Medicare database.

PubMed

Bang, Heejung

2005-10-01

Incompleteness is a key feature of most survival data. Numerous well established statistical methodologies and algorithms exist for analyzing life or failure time data. However, induced censorship invalidates the use of those standard analytic tools for some survival-type data such as medical costs. In this paper, some valid methods currently available for analyzing censored medical cost data are reviewed. Some cautionary findings under different assumptions are envisioned through application to medical costs from colorectal cancer patients. Cost analysis should be suitably planned and carefully interpreted under various meaningful scenarios even with judiciously selected statistical methods. This approach would be greatly helpful to policy makers who seek to prioritize health care expenditures and to assess the elements of resource use.

A novel methodology for estimating upper limits of major cost drivers for profitable conceptual launch system architectures

NASA Astrophysics Data System (ADS)

Rhodes, Russel E.; Byrd, Raymond J.

1998-01-01

This paper presents a ``back of the envelope'' technique for fast, timely, on-the-spot, assessment of affordability (profitability) of commercial space transportation architectural concepts. The tool presented here is not intended to replace conventional, detailed costing methodology. The process described enables ``quick look'' estimations and assumptions to effectively determine whether an initial concept (with its attendant cost estimating line items) provides focus for major leapfrog improvement. The Cost Charts Users Guide provides a generic sample tutorial, building an approximate understanding of the basic launch system cost factors and their representative magnitudes. This process will enable the user to develop a net ``cost (and price) per payload-mass unit to orbit'' incorporating a variety of significant cost drivers, supplemental to basic vehicle cost estimates. If acquisition cost and recurring cost factors (as a function of cost per payload-mass unit to orbit) do not meet the predetermined system-profitability goal, the concept in question will be clearly seen as non-competitive. Multiple analytical approaches, and applications of a variety of interrelated assumptions, can be examined in a quick, (on-the-spot) cost approximation analysis as this tool has inherent flexibility. The technique will allow determination of concept conformance to system objectives.

Industrial Technology Modernization Program. Project 80. Increase Efficiency of Card Test/Device Test Areas by the Usage of Improved Material Handling Systems. Revision 1. Phase 2

DTIC Science & Technology

1988-03-01

INDUSTRY ANALYSIS/FINDINGS 132 12 EQUIPMENT/MACHINERY ALTERNATIVES 134 13 MIS REQUIREMENTS/IMPROVEMENTS 135 14 COST BENEFIT ANALYSIS AND PROCEDURE 137 15...SOFTWARE DIAGRAM 14.0-1 COST BENEFIT ANALYSIS METHODOLOGY 138 14.3-1 PROJECT 80 EXPENDITURE SCHEDULE 141 14.4-1 PROJECT 80 CASH FLOWS 142 15.1-1 PROJECT 80...testing, streamlining work flow, and installation of ergonomically designed work cell/work centers. The benefits associated with the implementation of ITM

Assessment of Methodological Quality of Economic Evaluations in Belgian Drug Reimbursement Applications

PubMed Central

Simoens, Steven

2013-01-01

Objectives This paper aims to assess the methodological quality of economic evaluations included in Belgian reimbursement applications for Class 1 drugs. Materials and Methods For 19 reimbursement applications submitted during 2011 and Spring 2012, a descriptive analysis assessed the methodological quality of the economic evaluation, evaluated the assessment of that economic evaluation by the Drug Reimbursement Committee and the response to that assessment by the company. Compliance with methodological guidelines issued by the Belgian Healthcare Knowledge Centre was assessed using a detailed checklist of 23 methodological items. The rate of compliance was calculated based on the number of economic evaluations for which the item was applicable. Results Economic evaluations tended to comply with guidelines regarding perspective, target population, subgroup analyses, comparator, use of comparative clinical data and final outcome measures, calculation of costs, incremental analysis, discounting and time horizon. However, more attention needs to be paid to the description of limitations of indirect comparisons, the choice of an appropriate analytic technique, the expression of unit costs in values for the current year, the estimation and valuation of outcomes, the presentation of results of sensitivity analyses, and testing the face validity of model inputs and outputs. Also, a large variation was observed in the scope and depth of the quality assessment by the Drug Reimbursement Committee. Conclusions Although general guidelines exist, pharmaceutical companies and the Drug Reimbursement Committee would benefit from the existence of a more detailed checklist of methodological items that need to be reported in an economic evaluation. PMID:24386474

Assessment of methodological quality of economic evaluations in belgian drug reimbursement applications.

PubMed

Simoens, Steven

2013-01-01

This paper aims to assess the methodological quality of economic evaluations included in Belgian reimbursement applications for Class 1 drugs. For 19 reimbursement applications submitted during 2011 and Spring 2012, a descriptive analysis assessed the methodological quality of the economic evaluation, evaluated the assessment of that economic evaluation by the Drug Reimbursement Committee and the response to that assessment by the company. Compliance with methodological guidelines issued by the Belgian Healthcare Knowledge Centre was assessed using a detailed checklist of 23 methodological items. The rate of compliance was calculated based on the number of economic evaluations for which the item was applicable. Economic evaluations tended to comply with guidelines regarding perspective, target population, subgroup analyses, comparator, use of comparative clinical data and final outcome measures, calculation of costs, incremental analysis, discounting and time horizon. However, more attention needs to be paid to the description of limitations of indirect comparisons, the choice of an appropriate analytic technique, the expression of unit costs in values for the current year, the estimation and valuation of outcomes, the presentation of results of sensitivity analyses, and testing the face validity of model inputs and outputs. Also, a large variation was observed in the scope and depth of the quality assessment by the Drug Reimbursement Committee. Although general guidelines exist, pharmaceutical companies and the Drug Reimbursement Committee would benefit from the existence of a more detailed checklist of methodological items that need to be reported in an economic evaluation.

Optimizing Clinical Trial Enrollment Methods Through "Goal Programming"

PubMed Central

Davis, J.M.; Sandgren, A.J.; Manley, A.R.; Daleo, M.A.; Smith, S.S.

2014-01-01

Introduction Clinical trials often fail to reach desired goals due to poor recruitment outcomes, including low participant turnout, high recruitment cost, or poor representation of minorities. At present, there is limited literature available to guide recruitment methodology. This study, conducted by researchers at the University of Wisconsin Center for Tobacco Research and Intervention (UW-CTRI), provides an example of how iterative analysis of recruitment data may be used to optimize recruitment outcomes during ongoing recruitment. Study methodology UW-CTRI’s research team provided a description of methods used to recruit smokers in two randomized trials (n = 196 and n = 175). The trials targeted low socioeconomic status (SES) smokers and involved time-intensive smoking cessation interventions. Primary recruitment goals were to meet required sample size and provide representative diversity while working with limited funds and limited time. Recruitment data was analyzed repeatedly throughout each study to optimize recruitment outcomes. Results Estimates of recruitment outcomes based on prior studies on smoking cessation suggested that researchers would be able to recruit 240 low SES smokers within 30 months at a cost of $72,000. With employment of methods described herein, researchers were able to recruit 374 low SES smokers over 30 months at a cost of $36,260. Discussion Each human subjects study presents unique recruitment challenges with time and cost of recruitment dependent on the sample population and study methodology. Nonetheless, researchers may be able to improve recruitment outcomes though iterative analysis of recruitment data and optimization of recruitment methods throughout the recruitment period. PMID:25642125

Traumatic brain injury: methodological approaches to estimate health and economic outcomes.

PubMed

Lu, Juan; Roe, Cecilie; Aas, Eline; Lapane, Kate L; Niemeier, Janet; Arango-Lasprilla, Juan Carlos; Andelic, Nada

2013-12-01

The effort to standardize the methodology and adherence to recommended principles for all economic evaluations has been emphasized in medical literature. The objective of this review is to examine whether economic evaluations in traumatic brain injury (TBI) research have been compliant with existing guidelines. Medline search was performed between January 1, 1995 and August 11, 2012. All original TBI-related full economic evaluations were included in the study. Two authors independently rated each study's methodology and data presentation to determine compliance to the 10 methodological principles recommended by Blackmore et al. Descriptive analysis was used to summarize the data. Inter-rater reliability was assessed with Kappa statistics. A total of 28 studies met the inclusion criteria. Eighteen of these studies described cost-effectiveness, seven cost-benefit, and three cost-utility analyses. The results showed a rapid growth in the number of published articles on the economic impact of TBI since 2000 and an improvement in their methodological quality. However, overall compliance with recommended methodological principles of TBI-related economic evaluation has been deficient. On average, about six of the 10 criteria were followed in these publications, and only two articles met all 10 criteria. These findings call for an increased awareness of the methodological standards that should be followed by investigators both in performance of economic evaluation and in reviews of evaluation reports prior to publication. The results also suggest that all economic evaluations should be made by following the guidelines within a conceptual framework, in order to facilitate evidence-based practices in the field of TBI.

Concentrated photovoltaics system costs and learning curve analysis

NASA Astrophysics Data System (ADS)

Haysom, Joan E.; Jafarieh, Omid; Anis, Hanan; Hinzer, Karin

2013-09-01

An extensive set of costs in /W for the installed costs of CPV systems has been amassed from a range of public sources, including both individual company prices and market reports. Cost reductions over time are very evident, with current prices for 2012 in the range of 3.0 ± 0.7 /W and a predicted cost of 1.5 /W for 2020. Cost data is combined with deployment volumes in a learning curve analysis, providing a fitted learning rate of either 18.5% or 22.3% depending on the methodology. This learning rate is compared to that of PV modules and PV installed systems, and the influence of soft costs is discussed. Finally, if an annual growth rate of 39% is assumed for deployed volumes, then, using the learning rate of 20%, this would predict the achievement of a cost point of 1.5 /W by 2016.

Cost analysis of water recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

A methodology was developed to predict the relevant contributions of the more intangible cost elements encountered in the development of flight-qualified hardware based on an extrapolation of past hardware development experience. Major items of costs within water recovery systems were identified and related to physical and/or performance criteria. Cost and performance data from Gemini, Skylab, and other aerospace and biotechnology programs were analyzed to identify major cost elements required to establish cost estimating relationships for advanced water recovery systems. The results of the study are expected to assist NASA in long-range planning and allocation of resources in a cost effective manner in support of earth orbital programs. This report deals with the cost analysis of the five leading water reclamation systems, namely: (1) RITE waste management-water system, (2) reverse osmosis system, (3) multifiltration system, (4) vapor compression system, and (5) closed air evaporation system with electrolytic pretreatment.

A comparative review of nurse turnover rates and costs across countries.

PubMed

Duffield, Christine M; Roche, Michael A; Homer, Caroline; Buchan, James; Dimitrelis, Sofia

2014-12-01

To compare nurse turnover rates and costs from four studies in four countries (US, Canada, Australia, New Zealand) that have used the same costing methodology; the original Nursing Turnover Cost Calculation Methodology. Measuring and comparing the costs and rates of turnover is difficult because of differences in definitions and methodologies. Comparative review. Searches were carried out within CINAHL, Business Source Complete and Medline for studies that used the original Nursing Turnover Cost Calculation Methodology and reported on both costs and rates of nurse turnover, published from 2014 and prior. A comparative review of turnover data was conducted using four studies that employed the original Nursing Turnover Cost Calculation Methodology. Costing data items were converted to percentages, while total turnover costs were converted to US 2014 dollars and adjusted according to inflation rates, to permit cross-country comparisons. Despite using the same methodology, Australia reported significantly higher turnover costs ($48,790) due to higher termination (~50% of indirect costs) and temporary replacement costs (~90% of direct costs). Costs were almost 50% lower in the US ($20,561), Canada ($26,652) and New Zealand ($23,711). Turnover rates also varied significantly across countries with the highest rate reported in New Zealand (44·3%) followed by the US (26·8%), Canada (19·9%) and Australia (15·1%). A significant proportion of turnover costs are attributed to temporary replacement, highlighting the importance of nurse retention. The authors suggest a minimum dataset is also required to eliminate potential variability across countries, states, hospitals and departments. © 2014 John Wiley & Sons Ltd.

Optimizing value utilizing Toyota Kata methodology in a multidisciplinary clinic.

PubMed

Merguerian, Paul A; Grady, Richard; Waldhausen, John; Libby, Arlene; Murphy, Whitney; Melzer, Lilah; Avansino, Jeffrey

2015-08-01

Value in healthcare is measured in terms of patient outcomes achieved per dollar expended. Outcomes and cost must be measured at the patient level to optimize value. Multidisciplinary clinics have been shown to be effective in providing coordinated and comprehensive care with improved outcomes, yet tend to have higher cost than typical clinics. We sought to lower individual patient cost and optimize value in a pediatric multidisciplinary reconstructive pelvic medicine (RPM) clinic. The RPM clinic is a multidisciplinary clinic that takes care of patients with anomalies of the pelvic organs. The specialties involved include Urology, General Surgery, Gynecology, and Gastroenterology/Motility. From May 2012 to November 2014 we performed time-driven activity-based costing (TDABC) analysis by measuring provider time for each step in the patient flow. Using observed time and the estimated hourly cost of each of the providers we calculated the final cost at the individual patient level, targeting clinic preparation. We utilized Toyota Kata methodology to enhance operational efficiency in an effort to optimize value. Variables measured included cost, time to perform a task, number of patients seen in clinic, percent value-added time (VAT) to patients (face to face time) and family experience scores (FES). At the beginning of the study period, clinic costs were $619 per patient. We reduced conference time from 6 min/patient to 1 min per patient, physician preparation time from 8 min to 6 min and increased Medical Assistant (MA) preparation time from 9.5 min to 20 min, achieving a cost reduction of 41% to $366 per patient. Continued improvements further reduced the MA preparation time to 14 min and the MD preparation time to 5 min with a further cost reduction to $194 (69%) (Figure). During this study period, we increased the number of appointments per clinic. We demonstrated sustained improvement in FES with regards to the families overall experience with their providers. Value added time was increased from 60% to 78% but this was not significant. Time-based cost analysis effectively measures individualized patient cost. We achieved a 69% reduction in clinic preparation costs. Despite this reduction in costs, we were able to maintain VAT and sustain improvements in family experience. In caring for complex patients, lean management methodology enables optimization of value in a multidisciplinary clinic. Copyright © 2015. Published by Elsevier Ltd.

Estimating the return on investment in disease management programs using a pre-post analysis.

PubMed

Fetterolf, Donald; Wennberg, David; Devries, Andrea

2004-01-01

Disease management programs have become increasingly popular over the past 5-10 years. Recent increases in overall medical costs have precipitated new concerns about the cost-effectiveness of medical management programs that have extended to the program directors for these programs. Initial success of the disease management movement is being challenged on the grounds that reported results have been the result of the application of faulty, if intuitive, methodologies. This paper discusses the use of "pre-post" methodology approaches in the analysis of disease management programs, and areas where application of this approach can result in spurious results and incorrect financial outcome assessments. The paper includes a checklist of these items for use by operational staff working with the programs, and a comprehensive bibliography that addresses many of the issues discussed.

Methodological challenges collecting parent phone-call healthcare utilization data.

PubMed

Moreau, Paula; Crawford, Sybil; Sullivan-Bolyai, Susan

2016-02-01

Recommendations by the National Institute of Nursing Research and other groups have strongly encouraged nurses to pay greater attention to cost-effectiveness analysis when conducting research. Given the increasing prominence of translational science and comparative effective research, cost-effective analysis has become a basic tool in determining intervention value in research. Tracking phone-call communication (number of calls and context) with cross-checks between parents and healthcare providers is an example of this type of healthcare utilization data collection. This article identifies some methodological challenges that have emerged in the process of collecting this type of data in a randomized controlled trial: Parent education Through Simulation-Diabetes (PETS-D). We also describe ways in which those challenges have been addressed with comparison data results, and make recommendations for future research. Copyright © 2015 Elsevier Inc. All rights reserved.

Counting the cost: estimating the economic benefit of pedophile treatment programs.

PubMed

Shanahan, M; Donato, R

2001-04-01

The principal objective of this paper is to identify the economic costs and benefits of pedophile treatment programs incorporating both the tangible and intangible cost of sexual abuse to victims. Cost estimates of cognitive behavioral therapy programs in Australian prisons are compared against the tangible and intangible costs to victims of being sexually abused. Estimates are prepared that take into account a number of problematic issues. These include the range of possible recidivism rates for treatment programs; the uncertainty surrounding the number of child sexual molestation offences committed by recidivists; and the methodological problems associated with estimating the intangible costs of sexual abuse on victims. Despite the variation in parameter estimates that impact on the cost-benefit analysis of pedophile treatment programs, it is found that potential range of economic costs from child sexual abuse are substantial and the economic benefits to be derived from appropriate and effective treatment programs are high. Based on a reasonable set of parameter estimates, in-prison, cognitive therapy treatment programs for pedophiles are likely to be of net benefit to society. Despite this, a critical area of future research must include further methodological developments in estimating the quantitative impact of child sexual abuse in the community.

Methodological quality of economic evaluations of new pharmaceuticals in The Netherlands.

PubMed

Hoomans, Ties; Severens, Johan L; van der Roer, Nicole; Delwel, Gepke O

2012-03-01

In the Netherlands, decisions about the reimbursement of new pharmaceuticals are based on cost effectiveness, as well as therapeutic value and budget impact. Since 1 January 2005, drug manufacturers are formally required to substantiate the cost effectiveness of drugs that have therapeutic added value in comparison with existing ones through pharmacoeconomic evaluations. Dutch guidelines for pharmacoeconomic research provide methods guidance, ensuring consistency in both the evidence and the decision-making process about drug reimbursement. This study reviewed the methodological quality of all 21 formally required pharmacoeconomic evaluations of new pharmaceuticals between 1 January 2005 and 1 October 2008, and verified whether these evaluations complied with pharmacoeconomic guidelines. Data on the quality of the pharmacoeconomic evaluations were extracted from the pharmacoeconomic reports published by the Dutch Health Care Insurance Board (CVZ). The Board's newsletters provided information on the advice to, and reimbursement decisions made by, the Dutch Minister of Health. All data extraction was carried out by two independent reviewers, and descriptive analyses were conducted. The methodological quality was sound in only 8 of the 21 pharmacoeconomic evaluations. In most cases, the perspective of analysis, the comparator drugs, and the reporting of both total and incremental costs and effects were correct. However, drug indication, form (i.e. cost utility/cost effectiveness) and time horizon of the evaluations were frequently flawed. Moreover, the costs and effects of the pharmaceuticals were not always analysed correctly, and modelling studies were often non-transparent. Twelve drugs were reimbursed, and nine were not. The compliance with pharmacoeconomic guidelines in economic evaluations of new pharmaceuticals can be improved. This would improve the methodological quality of the pharmacoeconomic evaluations and ensure consistency in the evidence and the decision-making process for drug reimbursement in the Netherlands.

Fast and low-cost method for VBES bathymetry generation in coastal areas

NASA Astrophysics Data System (ADS)

Sánchez-Carnero, N.; Aceña, S.; Rodríguez-Pérez, D.; Couñago, E.; Fraile, P.; Freire, J.

2012-12-01

Sea floor topography is key information in coastal area management. Nowadays, LiDAR and multibeam technologies provide accurate bathymetries in those areas; however these methodologies are yet too expensive for small customers (fishermen associations, small research groups) willing to keep a periodic surveillance of environmental resources. In this paper, we analyse a simple methodology for vertical beam echosounder (VBES) bathymetric data acquisition and postprocessing, using low-cost means and free customizable tools such as ECOSONS and gvSIG (that is compared with industry standard ArcGIS). Echosounder data was filtered, resampled and, interpolated (using kriging or radial basis functions). Moreover, the presented methodology includes two data correction processes: Monte Carlo simulation, used to reduce GPS errors, and manually applied bathymetric line transformations, both improving the obtained results. As an example, we present the bathymetry of the Ría de Cedeira (Galicia, NW Spain), a good testbed area for coastal bathymetry methodologies given its extension and rich topography. The statistical analysis, performed by direct ground-truthing, rendered an upper bound of 1.7 m error, at 95% confidence level, and 0.7 m r.m.s. (cross-validation provided 30 cm and 25 cm, respectively). The methodology presented is fast and easy to implement, accurate outside transects (accuracy can be estimated), and can be used as a low-cost periodical monitoring method.

A Pilot Cost-Effectiveness Analysis of the Economic and Educational Impact of the Mountain-Plains Education and Economic Development Program, Inc. A Research Study for Department of Health, Education and Welfare, National Institute of Education. Revised May 1976.

ERIC Educational Resources Information Center

Stromsdorfer, Ernst W.; Moayed-Dadkhah, Kamran

Presenting a cost-benefit analysis of the Mountain-Plains Career Education Program (a family based program for the economically deprived in the mountain plains states operating out of Glasgow Air Force Base in Montana) and the methodological basis for a full and more detailed study, this evaluation includes: (1) discussion of theoretical issues…

Cost Effectiveness Analysis, A DTIC Bibliography.

DTIC Science & Technology

1980-07-01

CoSt.Nonstetionary Case. - AD-AO46 808 AD-AO0O 505 -PERSONAL AUTHOR -IKDEX-49 UNCLASSIFIED ZOW)? SAV-C"U F UNC LASS IF! ED *SCHUMACHER. WILLIAM J. OSEABERO. ERNEST ...Laboratory. Wright- Patterson AFB. envirOnmelnks wnder risk. Historically- VERT hs Ohio 45433. This work was ai calibration and been used crirnCiPally to...WRIGHT- PATTERSON AFB OH SCHOOL OF ALEXANDRIA VA SYSTEMS A𔃾D LOGISTICS A Methodology and Analysis for Cost-EffzCtive An Investigation of Changes in

Developing a Methodology for Risk-Informed Trade-Space Analysis in Acquisition

DTIC Science & Technology

2015-01-01

73 6.10. Research, Development, Test, and Evaluation Cost Distribution, Technology 1 Mitigation of...6.11. Research, Development, Test, and Evaluation Cost Distribution, Technology 3 Mitigation of the Upgrade Alternative...courses of action, or risk- mitigation behaviors, which take place in the event that the technology is not developed by the mile- stone date (e.g

Valuation of Drug Abuse: A Review of Current Methodologies and Implications for Policy Making

ERIC Educational Resources Information Center

Schori, Maayan

2011-01-01

This article reviews the use of several valuation methods as they relate to drug abuse and places them within the context of U.S. policy. First, cost-of-illness (COI) studies are reviewed and their limitations discussed. Second, three additional economic methods of valuing drug abuse are reviewed, including cost-effectiveness analysis (CEA),…

Development Risk Methodology for Whole Systems Trade Analysis

DTIC Science & Technology

2016-08-01

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding...JCIDS - Joint Capabilities Integration and Development System L - Likelihood MS - Milestone O&S - Operations and Sustainment P.95 - 95th...and their consequences. These dimensions are: performance, unit cost, operations & sustainment (O&S) cost, development risk, and growth potential

What difference a decade? The costs of psychosis in Australia in 2000 and 2010: comparative results from the first and second Australian national surveys of psychosis.

PubMed

Neil, Amanda L; Carr, Vaughan J; Mihalopoulos, Cathrine; Mackinnon, Andrew; Lewin, Terry J; Morgan, Vera A

2014-03-01

To assess differences in costs of psychosis between the first and second Australian national surveys of psychosis and examine them in light of policy developments. Cost differences due to changes in resource use and/or real price rises were assessed by minimizing differences in recruitment and costing methodologies between the two surveys. For each survey, average annual societal costs of persons recruited through public specialized mental health services in the census month were assessed through prevalence-based, bottom-up cost-of-illness analyses. The first survey costing methodology was employed as the reference approach. Unit costs were specific to each time period (2000, 2010) and expressed in 2010 Australian dollars. There was minimal change in the average annual costs of psychosis between the surveys, although newly included resources in the second survey's analysis cost AUD$3183 per person. Among resources common to each analysis were significant increases in the average annual cost per person for ambulatory care of AUD$7380, non-government services AUD$2488 and pharmaceuticals AUD$1892, and an upward trend in supported accommodation costs. These increases were offset by over a halving of mental health inpatient costs of AUD$11,790 per person and a 84.6% (AUD$604) decrease in crisis accommodation costs. Productivity losses, the greatest component cost, changed minimally, reflecting the magnitude and constancy of reduced employment levels of individuals with psychosis across the surveys. Between 2000 and 2010 there was little change in total average annual costs of psychosis for individuals receiving treatment at public specialized mental health services. However, there was a significant redistribution of costs within and away from the health sector in line with government initiatives arising from the Second and Third National Mental Health Plans. Non-health sector costs are now a critical component of cost-of-illness analyses of mental illnesses reflecting, at least in part, a whole-of-government approach to care.

A cost-effectiveness analysis of a residential radon remediation programme in the United Kingdom.

PubMed

Kennedy, C A; Gray, A M; Denman, A R; Phillips, P S

1999-12-01

As residential radon programmes of identification and remediation have proceeded, so questions have been raised about their costs and benefits. This study presents a generalizable model for estimating the cost-effectiveness of a radon mitigation programme using the methodological framework now considered appropriate in the economic evaluation of health interventions. Its use will help to inform future discussion of radon remediation and lung cancer prevention programmes. Data from Northamptonshire were analysed, resulting in a societal cost-effectiveness ratio of Pounds Sterling 13250 per life-year gained in 1997. The percentage of houses found to be over the action level, and the percentage of householders who decide to remediate are shown to be important parameters for the cost-effectiveness analysis. Questions are raised about the particular importance of perspective in this type of analysis and suggestions are made for future research directions.

Application of the Hardman methodology to the Single Channel Ground-Airborne Radio System (SINCGARS)

NASA Technical Reports Server (NTRS)

1984-01-01

The HARDMAN methodology was applied to the various configurations of employment for an emerging Army multipurpose communications system. The methodology was used to analyze the manpower, personnel and training (MPT) requirements and associated costs, of the system concepts responsive to the Army's requirement for the Single Channel Ground-Airborne Radio System (SINCGARS). The scope of the application includes the analysis of two conceptual designs Cincinnati Electronics and ITT Aerospace/Optical Division for operating and maintenance support addressed through the general support maintenance echelon.

A normative price for a manufactured product: The SAMICS methodology. Volume 2: Analysis

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1979-01-01

The Solar Array Manufacturing Industry Costing Standards provide standard formats, data, assumptions, and procedures for determining the price a hypothetical solar array manufacturer would have to be able to obtain in the market to realize a specified after-tax rate of return on equity for a specified level of production. The methodology and its theoretical background are presented. The model is sufficiently general to be used in any production-line manufacturing environment. Implementation of this methodology by the Solar Array Manufacturing Industry Simultation computer program is discussed.

Ground support system methodology and architecture

NASA Technical Reports Server (NTRS)

Schoen, P. D.

1991-01-01

A synergistic approach to systems test and support is explored. A building block architecture provides transportability of data, procedures, and knowledge. The synergistic approach also lowers cost and risk for life cycle of a program. The determination of design errors at the earliest phase reduces cost of vehicle ownership. Distributed scaleable architecture is based on industry standards maximizing transparency and maintainability. Autonomous control structure provides for distributed and segmented systems. Control of interfaces maximizes compatibility and reuse, reducing long term program cost. Intelligent data management architecture also reduces analysis time and cost (automation).

Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Liu, Bing

This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs andmore » savings over time.« less

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Value-Based Medicine and Pharmacoeconomics.

PubMed

Brown, Gary C; Brown, Melissa M

2016-01-01

Pharmacoeconomics is assuming increasing importance in the pharmaceutical field since it is entering the public policy arena in many countries. Among the variants of pharmacoeconomic analysis are cost-minimization, cost-benefit, cost-effectiveness and cost-utility analyses. The latter is the most versatile and sophisticated in that it integrates the patient benefit (patient value) conferred by a drug in terms of improvement in length and/or quality of life. It also incorporates the costs expended for that benefit, as well as the dollars returned to patients and society from the use of a drug (financial value). Unfortunately, one cost-utility analysis in the literature is generally not comparable to another because of the lack of standardized formats and standardized input variables (costs, cost perspective, quality-of-life measurement instruments, quality-of-life respondents, discounting and so forth). Thus, millions of variants can be used. Value-based medicine® (VBM) cost-utility analysis standardizes these variants so that one VBM analysis is comparable to another. This system provides a highly rational methodology that allows providers and patients to quantify and compare the patient value and financial value gains associated with the use of pharmaceutical agents for example. © 2016 S. Karger AG, Basel.

[Determination of cost-effective strategies in colorectal cancer screening].

PubMed

Dervaux, B; Eeckhoudt, L; Lebrun, T; Sailly, J C

1992-01-01

The object of the article is to implement particular methodologies in order to determine which strategies are cost-effective in the mass screening of colorectal cancer after a positive Hemoccult test. The first approach to be presented consists in proposing a method which enables all the admissible diagnostic strategies to be determined. The second approach enables a minimal cost function to be estimated using an adaptation of "Data Envelopment Analysis". This method proves to be particularly successful in cost-efficiency analysis, when the performance indicators are numerous and hard to aggregate. The results show that there are two cost-effective strategies after a positive Hemoccult test: coloscopy and sigmoidoscopy; they put into question the relevance of double contrast barium enema in the diagnosis of colo-rectal lesions.

The cost of post-abortion care in developing countries: a comparative analysis of four studies.

PubMed

Vlassoff, Michael; Singh, Susheela; Onda, Tsuyoshi

2016-10-01

Over the last five years, comprehensive national surveys of the cost of post-abortion care (PAC) to national health systems have been undertaken in Ethiopia, Uganda, Rwanda and Colombia using a specially developed costing methodology-the Post-abortion Care Costing Methodology (PACCM). The objective of this study is to expand the research findings of these four studies, making use of their extensive datasets. These studies offer the most complete and consistent estimates of the cost of PAC to date, and comparing their findings not only provides generalizable implications for health policies and programs, but also allows an assessment of the PACCM methodology. We find that the labor cost component varies widely: in Ethiopia and Colombia doctors spend about 30-60% more time with PAC patients than do nurses; in Uganda and Rwanda an opposite pattern is found. Labor costs range from I$42.80 in Uganda to I$301.30 in Colombia. The cost of drugs and supplies does not vary greatly, ranging from I$79 in Colombia to I$115 in Rwanda. Capital and overhead costs are substantial amounting to 52-68% of total PAC costs. Total costs per PAC case vary from I$334 in Rwanda to I$972 in Colombia. The financial burden of PAC is considerable: the expense of treating each PAC case is equivalent to around 35% of annual per capita income in Uganda, 29% in Rwanda and 11% in Colombia. Providing modern methods of contraception to women with an unmet need would cost just a fraction of the average expenditure on PAC: one year of modern contraceptive services and supplies cost only 3-12% of the average cost of treating a PAC patient. © The Author 2016. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Development of weight and cost estimates for lifting surfaces with active controls

NASA Technical Reports Server (NTRS)

Anderson, R. D.; Flora, C. C.; Nelson, R. M.; Raymond, E. T.; Vincent, J. H.

1976-01-01

Equations and methodology were developed for estimating the weight and cost incrementals due to active controls added to the wing and horizontal tail of a subsonic transport airplane. The methods are sufficiently generalized to be suitable for preliminary design. Supporting methodology and input specifications for the weight and cost equations are provided. The weight and cost equations are structured to be flexible in terms of the active control technology (ACT) flight control system specification. In order to present a self-contained package, methodology is also presented for generating ACT flight control system characteristics for the weight and cost equations. Use of the methodology is illustrated.

18 CFR 301.7 - Average System Cost methodology functionalization.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Average System Cost methodology functionalization. 301.7 Section 301.7 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.7 Average System Cost methodology functionalization. (a) Functionalization of each Account...

18 CFR 301.7 - Average System Cost methodology functionalization.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Average System Cost methodology functionalization. 301.7 Section 301.7 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.7 Average System Cost methodology functionalization. (a) Functionalization of each Account...

18 CFR 301.7 - Average System Cost methodology functionalization.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Average System Cost methodology functionalization. 301.7 Section 301.7 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.7 Average System Cost methodology functionalization. (a) Functionalization of each Account...

18 CFR 301.7 - Average System Cost methodology functionalization.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Average System Cost methodology functionalization. 301.7 Section 301.7 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.7 Average System Cost methodology functionalization. (a) Functionalization of each Account...

Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

NASA Astrophysics Data System (ADS)

Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

2017-09-01

Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

What lies behind crop decisions?Coming to terms with revealing farmers' preferences

NASA Astrophysics Data System (ADS)

Gomez, C.; Gutierrez, C.; Pulido-Velazquez, M.; López Nicolás, A.

2016-12-01

The paper offers a fully-fledged applied revealed preference methodology to screen and represent farmers' choices as the solution of an optimal program involving trade-offs among the alternative welfare outcomes of crop decisions such as profits, income security and management easiness. The recursive two-stage method is proposed as an alternative to cope with the methodological problems inherent to common practice positive mathematical program methodologies (PMP). Differently from PMP, in the model proposed in this paper, the non-linear costs that are required for both calibration and smooth adjustment are not at odds with the assumptions of linear Leontief technologies and fixed crop prices and input costs. The method frees the model from ad-hoc assumptions about costs and then recovers the potential of economic analysis as a means to understand the rationale behind observed and forecasted farmers' decisions and then to enhance the potential of the model to support policy making in relevant domains such as agricultural policy, water management, risk management and climate change adaptation. After the introduction, where the methodological drawbacks and challenges are set up, section two presents the theoretical model, section three develops its empirical application and presents its implementation to a Spanish irrigation district and finally section four concludes and makes suggestions for further research.

Internal Logistics System Selection with Total Cost of Ownership Analysis

NASA Astrophysics Data System (ADS)

Araújo, Inês; Pimentel, Carina; Godina, Radu; Matias, João C. O.

2017-06-01

In this paper a methodology was followed in order to support the decision-making of one industrial unit regarding its internal logistics system. The addressed factory was facing issues with their internal logistics approach. Some alternatives were pointed out and a proper total cost of ownership (TCO) analysis was developed. This analysis was taken in order to demonstrate the more cost-effective solution for the internal logistics system. This tool is more and more valued by the companies, due to their willing to reduce the costs that are associated with the way of doing business. Despite the proposal of the best choice for the internal logistics system of the enterprise, this study also intends to present some conclusions about the match between the nature of the industrial unit and the logistics systems that best fit the requirements of those.

Health care economic analyses and value-based medicine.

PubMed

Brown, Melissa M; Brown, Gary C; Sharma, Sanjay; Landy, Jennifer

2003-01-01

Health care economic analyses are becoming increasingly important in the evaluation of health care interventions, including many within ophthalmology. Encompassed with the realm of health care economic studies are cost-benefit analysis, cost-effectiveness analysis, cost-minimization analysis, and cost-utility analysis. Cost-utility analysis is the most sophisticated form of economic analysis and typically incorporates utility values. Utility values measure the preference for a health state and range from 0.0 (death) to 1.0 (perfect health). When the change in utility measures conferred by a health care intervention is multiplied by the duration of the benefit, the number of quality-adjusted life-years (QALYs) gained from the intervention is ascertained. This methodology incorporates both the improvement in quality of life and/or length of life, or the value, occurring as a result of the intervention. This improvement in value can then be amalgamated with discounted costs to yield expenditures per quality-adjusted life-year ($/QALY) gained. $/QALY gained is a measure that allows a comparison of the patient-perceived value of virtually all health care interventions for the dollars expended. A review of the literature on health care economic analyses, with particular emphasis on cost-utility analysis, is included in the present review. It is anticipated that cost-utility analysis will play a major role in health care within the coming decade.

[Controversial issues in economic evaluation (I): perspective and costs of Health Care interventions].

PubMed

Oliva, Juan; Brosa, Max; Espín, Jaime; Figueras, Montserrat; Trapero, Marta

2015-01-01

Economic evaluation of health care interventions has experienced a strong growth over the past decade and is increasingly present as a support tool in the decisions making process on public funding of health services and pricing in European countries. A necessary element using them is that agents that perform economic evaluations have minimum rules with agreement on methodological aspects. Although there are methodological issues in which there is a high degree of consensus, there are others in which there is no such degree of agreement being closest to the normative field or have experienced significant methodological advances in recent years. In this first article of a series of three, we will discuss on the perspective of analysis and assessment of costs in economic evaluation of health interventions using the technique Metaplan. Finally, research lines are proposed to overcome the identified discrepancies.

A Systematic Review of Cost-Effectiveness Studies Reporting Cost-per-DALY Averted

PubMed Central

Neumann, Peter J.; Thorat, Teja; Zhong, Yue; Anderson, Jordan; Farquhar, Megan; Salem, Mark; Sandberg, Eileen; Saret, Cayla J.; Wilkinson, Colby; Cohen, Joshua T.

2016-01-01

Introduction Calculating the cost per disability-adjusted life years (DALYs) averted associated with interventions is an increasing popular means of assessing the cost-effectiveness of strategies to improve population health. However, there has been no systematic attempt to characterize the literature and its evolution. Methods We conducted a systematic review of cost-effectiveness studies reporting cost-per-DALY averted from 2000 through 2015. We developed the Global Health Cost-Effectiveness Analysis (GHCEA) Registry, a repository of English-language cost-per-DALY averted studies indexed in PubMed. To identify candidate studies, we searched PubMed for articles with titles or abstracts containing the phrases “disability-adjusted” or “DALY”. Two reviewers with training in health economics independently reviewed each article selected in our abstract review, gathering information using a standardized data collection form. We summarized descriptive characteristics on study methodology: e.g., intervention type, country of study, study funder, study perspective, along with methodological and reporting practices over two time periods: 2000–2009 and 2010–2015. We analyzed the types of costs included in analyses, the study quality on a scale from 1 (low) to 7 (high), and examined the correlation between diseases researched and the burden of disease in different world regions. Results We identified 479 cost-per-DALY averted studies published from 2000 through 2015. Studies from Sub-Saharan Africa comprised the largest portion of published studies. The disease areas most commonly studied were communicable, maternal, neonatal, and nutritional disorders (67%), followed by non-communicable diseases (28%). A high proportion of studies evaluated primary prevention strategies (59%). Pharmaceutical interventions were commonly assessed (32%) followed by immunizations (28%). Adherence to good practices for conducting and reporting cost-effectiveness analysis varied considerably. Studies mainly included formal healthcare sector costs. A large number of the studies in Sub-Saharan Africa addressed high-burden conditions such as HIV/AIDS, tuberculosis, neglected tropical diseases and malaria, and diarrhea, lower respiratory infections, meningitis, and other common infectious diseases. Conclusion The Global Health Cost-Effectiveness Analysis Registry reveals a growing and diverse field of cost-per-DALY averted studies. However, study methods and reporting practices have varied substantially. PMID:28005986

Structural damage continuous monitoring by using a data driven approach based on principal component analysis and cross-correlation analysis

NASA Astrophysics Data System (ADS)

Camacho-Navarro, Jhonatan; Ruiz, Magda; Villamizar, Rodolfo; Mujica, Luis; Moreno-Beltrán, Gustavo; Quiroga, Jabid

2017-05-01

Continuous monitoring for damage detection in structural assessment comprises implementation of low cost equipment and efficient algorithms. This work describes the stages involved in the design of a methodology with high feasibility to be used in continuous damage assessment. Specifically, an algorithm based on a data-driven approach by using principal component analysis and pre-processing acquired signals by means of cross-correlation functions, is discussed. A carbon steel pipe section and a laboratory tower were used as test structures in order to demonstrate the feasibility of the methodology to detect abrupt changes in the structural response when damages occur. Two types of damage cases are studied: crack and leak for each structure, respectively. Experimental results show that the methodology is promising in the continuous monitoring of real structures.

Secondary analysis of national survey datasets.

PubMed

Boo, Sunjoo; Froelicher, Erika Sivarajan

2013-06-01

This paper describes the methodological issues associated with secondary analysis of large national survey datasets. Issues about survey sampling, data collection, and non-response and missing data in terms of methodological validity and reliability are discussed. Although reanalyzing large national survey datasets is an expedient and cost-efficient way of producing nursing knowledge, successful investigations require a methodological consideration of the intrinsic limitations of secondary survey analysis. Nursing researchers using existing national survey datasets should understand potential sources of error associated with survey sampling, data collection, and non-response and missing data. Although it is impossible to eliminate all potential errors, researchers using existing national survey datasets must be aware of the possible influence of errors on the results of the analyses. © 2012 The Authors. Japan Journal of Nursing Science © 2012 Japan Academy of Nursing Science.

Aero-Mechanical Design Methodology for Subsonic Civil Transport High-Lift Systems

NASA Technical Reports Server (NTRS)

vanDam, C. P.; Shaw, S. G.; VanderKam, J. C.; Brodeur, R. R.; Rudolph, P. K. C.; Kinney, D.

2000-01-01

In today's highly competitive and economically driven commercial aviation market, the trend is to make aircraft systems simpler and to shorten their design cycle which reduces recurring, non-recurring and operating costs. One such system is the high-lift system. A methodology has been developed which merges aerodynamic data with kinematic analysis of the trailing-edge flap mechanism with minimum mechanism definition required. This methodology provides quick and accurate aerodynamic performance prediction for a given flap deployment mechanism early on in the high-lift system preliminary design stage. Sample analysis results for four different deployment mechanisms are presented as well as descriptions of the aerodynamic and mechanism data required for evaluation. Extensions to interactive design capabilities are also discussed.

Cost-effectiveness Analysis on Measures to Improve China's Coal-fired Industrial Boiler

DOE PAGES

Liu, Manzhi; Shen, Bo; Han, Yafeng; ...

2015-08-01

Tackling coal-burning industrial boiler is becoming one of the key programs to solve the environmental problem in China. Assessing the economics of various options to address coal-fired boiler is essential to identify cost-effective solutions. This paper discusses our work in conducting a cost-effectiveness analysis on various types of improvement measures ranging from energy efficiency retrofits to switch from coal to other fuels in China. Sensitivity analysis was also performed in order to understand the impacts of some economic factors such as discount rate and energy price on the economics of boiler improvement options. The results show that nine out ofmore » 14 solutions are cost-effective, and a lower discount rate and higher energy price will result in more energy efficiency measures being cost-effective. Both monetary and non-monetary barriers to energy-efficiency improvement are discussed and policies to tackle these barriers are recommended. Our research aims at providing a methodology to assess cost-effective solutions to boiler problems.« less

PubMed Central

Turchetti, G.; Bellelli, S.; Palla, I.; Forli, F.

2011-01-01

SUMMARY The aim of the study consists in a systematic review concerning the economic evaluation of cochlear implant (CI) in children by searching the main international clinical and economic electronic databases. All primary studies published in English from January 2000 to May 2010 were included. The types of studies selected concerned partial economic evaluation, including direct and indirect costs of cochlear implantation; complete economic evaluation, including minimization of costs, cost-effectiveness analysis (CEA), cost-utility analysis (CUA) and cost-benefit analysis (CBA) performed through observational and experimental studies. A total of 68 articles were obtained from the database research. Of these, 54 did not meet the inclusion criteria and were eliminated. After reading the abstracts of the 14 articles selected, 11 were considered eligible. The articles were then read in full text. Furthermore, 5 articles identified by bibliography research were added manually. After reading 16 of the selected articles, 9 were included in the review. With regard to the studies included, countries examined, objectives, study design, methodology, prospect of analysis adopted, temporal horizon, the cost categories analyzed strongly differ from one study to another. Cost analysis, cost-effectiveness analysis and an analysis of educational costs associated with cochlear implants were performed. Regarding the cost analysis, only two articles reported both direct cost and indirect costs. The direct cost ranged between € 39,507 and € 68,235 (2011 values). The studies related to cost-effectiveness analysis were not easily comparable: one study reported a cost per QALY ranging between $ 5197 and $ 9209; another referred a cost of $ 2154 for QALY if benefits were not discounted, and $ 16,546 if discounted. Educational costs are significant, and increase with the level of hearing loss and type of school attended. This systematic review shows that the healthcare costs are high, but savings in terms of indirect and quality of life costs are also significant. Cochlear implantation in a paediatric age is cost-effective. The exiguity and heterogeneity of studies did not allow detailed comparative analysis of the studies included in the review. PMID:22287822

Emergency medicine versus primary care: a case study of three prevalent, costly, and non-emergent diagnoses at a community teaching hospital.

PubMed

Martin, B C

2000-01-01

The high cost of emergency department (ED) care is often viewed as an area for achieving cost savings through reduced utilization for inappropriate conditions. The implementation of outpatient prospective payment for Medicare ED patients heightens scrutiny of costs and utilization in the ED versus primary care settings. Data from hospital clinical records, financial records, and a provider survey was used to develop a costing methodology and complete a comparative analysis of the cost of care for three diagnoses by setting. Total costs were significantly higher in the ED due primarily to differences in ancillary tests and prescription drugs ordered.

How to Measure Costs and Benefits of eHealth Interventions: An Overview of Methods and Frameworks.

PubMed

Bergmo, Trine Strand

2015-11-09

Information on the costs and benefits of eHealth interventions is needed, not only to document value for money and to support decision making in the field, but also to form the basis for developing business models and to facilitate payment systems to support large-scale services. In the absence of solid evidence of its effects, key decision makers may doubt the effectiveness, which, in turn, limits investment in, and the long-term integration of, eHealth services. However, it is not realistic to conduct economic evaluations of all eHealth applications and services in all situations, so we need to be able to generalize from those we do conduct. This implies that we have to select the most appropriate methodology and data collection strategy in order to increase the transferability across evaluations. This paper aims to contribute to the understanding of how to apply economic evaluation methodology in the eHealth field. It provides a brief overview of basic health economics principles and frameworks and discusses some methodological issues and challenges in conducting cost-effectiveness analysis of eHealth interventions. Issues regarding the identification, measurement, and valuation of costs and benefits are outlined. Furthermore, this work describes the established techniques of combining costs and benefits, presents the decision rules for identifying the preferred option, and outlines approaches to data collection strategies. Issues related to transferability and complexity are also discussed.

Space transfer vehicle concepts and requirements study. Volume 3, book 1: Program cost estimates

NASA Technical Reports Server (NTRS)

Peffley, Al F.

1991-01-01

The Space Transfer Vehicle (STV) Concepts and Requirements Study cost estimate and program planning analysis is presented. The cost estimating technique used to support STV system, subsystem, and component cost analysis is a mixture of parametric cost estimating and selective cost analogy approaches. The parametric cost analysis is aimed at developing cost-effective aerobrake, crew module, tank module, and lander designs with the parametric cost estimates data. This is accomplished using cost as a design parameter in an iterative process with conceptual design input information. The parametric estimating approach segregates costs by major program life cycle phase (development, production, integration, and launch support). These phases are further broken out into major hardware subsystems, software functions, and tasks according to the STV preliminary program work breakdown structure (WBS). The WBS is defined to a low enough level of detail by the study team to highlight STV system cost drivers. This level of cost visibility provided the basis for cost sensitivity analysis against various design approaches aimed at achieving a cost-effective design. The cost approach, methodology, and rationale are described. A chronological record of the interim review material relating to cost analysis is included along with a brief summary of the study contract tasks accomplished during that period of review and the key conclusions or observations identified that relate to STV program cost estimates. The STV life cycle costs are estimated on the proprietary parametric cost model (PCM) with inputs organized by a project WBS. Preliminary life cycle schedules are also included.

Effectiveness and cost of failure mode and effects analysis methodology to reduce neurosurgical site infections.

PubMed

Hover, Alexander R; Sistrunk, William W; Cavagnol, Robert M; Scarrow, Alan; Finley, Phillip J; Kroencke, Audrey D; Walker, Judith L

2014-01-01

Mercy Hospital Springfield is a tertiary care facility with 32 000 discharges and 15 000 inpatient surgeries in 2011. From June 2009 through January 2011, a stable inpatient elective neurosurgery infection rate of 2.15% was observed. The failure mode and effects analysis (FMEA) methodology to reduce inpatient neurosurgery infections was utilized. Following FMEA implementation, overall elective neurosurgery infection rates were reduced to 1.51% and sustained through May 2012. Compared with baseline, the post-FMEA deep-space and organ infection rate was reduced by 41% (P = .052). Overall hospital inpatient clean surgery infection rates for the same time frame did not decrease to the same extent, suggesting a specific effect of the FMEA. The study team believes that the FMEA interventions resulted in 14 fewer expected infections, $270 270 in savings, a 168-day reduction in expected length of stay, and 22 fewer readmissions. Given the serious morbidity and cost of health care-associated infections, the study team concludes that FMEA implementation was clinically cost-effective. © 2013 by the American College of Medical Quality.

18 CFR 301.5 - Changes in Average System Cost methodology.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Changes in Average System Cost methodology. 301.5 Section 301.5 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.5 Changes in Average System Cost methodology. (a) The Administrator, at his or her...

18 CFR 301.5 - Changes in Average System Cost methodology.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Changes in Average System Cost methodology. 301.5 Section 301.5 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.5 Changes in Average System Cost methodology. (a) The Administrator, at his or her...

18 CFR 301.5 - Changes in Average System Cost methodology.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Changes in Average System Cost methodology. 301.5 Section 301.5 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.5 Changes in Average System Cost methodology. (a) The Administrator, at his or her...

18 CFR 301.5 - Changes in Average System Cost methodology.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Changes in Average System Cost methodology. 301.5 Section 301.5 Conservation of Power and Water Resources FEDERAL ENERGY... ACT § 301.5 Changes in Average System Cost methodology. (a) The Administrator, at his or her...

Cost-effectiveness modelling in diagnostic imaging: a stepwise approach.

PubMed

Sailer, Anna M; van Zwam, Wim H; Wildberger, Joachim E; Grutters, Janneke P C

2015-12-01

Diagnostic imaging (DI) is the fastest growing sector in medical expenditures and takes a central role in medical decision-making. The increasing number of various and new imaging technologies induces a growing demand for cost-effectiveness analysis (CEA) in imaging technology assessment. In this article we provide a comprehensive framework of direct and indirect effects that should be considered for CEA in DI, suitable for all imaging modalities. We describe and explain the methodology of decision analytic modelling in six steps aiming to transfer theory of CEA to clinical research by demonstrating key principles of CEA in a practical approach. We thereby provide radiologists with an introduction to the tools necessary to perform and interpret CEA as part of their research and clinical practice. • DI influences medical decision making, affecting both costs and health outcome. • This article provides a comprehensive framework for CEA in DI. • A six-step methodology for conducting and interpreting cost-effectiveness modelling is proposed.

Effectiveness and cost-effectiveness of a health coaching intervention to improve the lifestyle of patients with knee osteoarthritis: cluster randomized clinical trial.

PubMed

Carmona-Terés, Victoria; Lumillo-Gutiérrez, Iris; Jodar-Fernández, Lina; Rodriguez-Blanco, Teresa; Moix-Queraltó, Joanna; Pujol-Ribera, Enriqueta; Mas, Xavier; Batlle-Gualda, Enrique; Gobbo-Montoya, Milena; Berenguera, Anna

2015-02-25

The prevalence of osteoarthritis and knee osteoarthritis in the Spanish population is estimated at 17% and 10.2%, respectively. The clinical guidelines concur that the first line treatment for knee osteoarthritis should be non-pharmacological and include weight loss, physical activity and self-management of pain. Health Coaching has been defined as an intervention that facilitates the achievement of health improvement goals, the reduction of unhealthy lifestyles, the improvement of self-management for chronic conditions and quality of life enhancement. The aim of this study is to analyze the effectiveness, cost-effectiveness and cost-utility of a health coaching intervention on quality of life, pain, overweight and physical activity in patients from 18 primary care centres of Barcelona with knee osteoarthritis. Methodology from the Medical Research Council on developing complex interventions. Phase 1: Intervention modelling and operationalization through a qualitative, socioconstructivist study using theoretical sampling with 10 in-depth interviews to patients with knee osteoarthritis and 4 discussion groups of 8-12 primary care professionals, evaluated using a sociological discourse analysis. Phase 2: Effectiveness, cost-effectiveness and cost-utility study with a community-based randomized clinical trial. 360 patients with knee osteoarthritis (180 in each group). Randomization unit: Primary Care Centre. Intervention Group: will receive standard care plus 20-hour health coaching and follow-up sessions. will receive standard care. quality of life as measured by the WOMAC index. Data Analyses: will include standardized response mean and multilevel analysis of repeated measures. Economic analysis: based on cost-effectiveness and cost-utility measures. Phase 3: Evaluation of the intervention programme with a qualitative study. Methodology as in Phase 1. If the analyses show the cost-effectiveness and cost-utility of the intervention the results can be incorporated into the clinical guidelines for the management of knee osteoarthritis in primary care. ISRCTN57405925. Registred 20 June 2014.

Integrated analysis considered mitigation cost, damage cost and adaptation cost in Northeast Asia

NASA Astrophysics Data System (ADS)

Park, J. H.; Lee, D. K.; Kim, H. G.; Sung, S.; Jung, T. Y.

2015-12-01

Various studies show that raising the temperature as well as storms, cold snap, raining and drought caused by climate change. And variety disasters have had a damage to mankind. The world risk report(2012, The Nature Conservancy) and UNU-EHS (the United Nations University Institute for Environment and Human Security) reported that more and more people are exposed to abnormal weather such as floods, drought, earthquakes, typhoons and hurricanes over the world. In particular, the case of Korea, we influenced by various pollutants which are occurred in Northeast Asian countries, China and Japan, due to geographical meteorological characteristics. These contaminants have had a significant impact on air quality with the pollutants generated in Korea. Recently, around the world continued their effort to reduce greenhouse gas and to improve air quality in conjunction with the national or regional development goals priority. China is also working on various efforts in accordance with the international flows to cope with climate change and air pollution. In the future, effect of climate change and air quality in Korea and Northeast Asia will be change greatly according to China's growth and mitigation policies. The purpose of this study is to minimize the damage caused by climate change on the Korean peninsula through an integrated approach taking into account the mitigation and adaptation plan. This study will suggest a climate change strategy at the national level by means of a comprehensive economic analysis of the impacts and mitigation of climate change. In order to quantify the impact and damage cost caused by climate change scenarios in a regional scale, it should be priority variables selected in accordance with impact assessment of climate change. The sectoral impact assessment was carried out on the basis of selected variables and through this, to derive the methodology how to estimate damage cost and adaptation cost. And then, the methodology was applied in Korea. Finally, we build an integrated analysis considered mitigation cost, damage cost, and adaptation cost by climate change

Integration of fringe projection and two-dimensional digital image correlation for three-dimensional displacements measurements

NASA Astrophysics Data System (ADS)

Felipe-Sesé, Luis; López-Alba, Elías; Siegmann, Philip; Díaz, Francisco A.

2016-12-01

A low-cost approach for three-dimensional (3-D) full-field displacement measurement is applied for the analysis of large displacements involved in two different mechanical events. The method is based on a combination of fringe projection and two-dimensional digital image correlation (DIC) techniques. The two techniques have been employed simultaneously using an RGB camera and a color encoding method; therefore, it is possible to measure in-plane and out-of-plane displacements at the same time with only one camera even at high speed rates. The potential of the proposed methodology has been employed for the analysis of large displacements during contact experiments in a soft material block. Displacement results have been successfully compared with those obtained using a 3D-DIC commercial system. Moreover, the analysis of displacements during an impact test on a metal plate was performed to emphasize the application of the methodology for dynamics events. Results show a good level of agreement, highlighting the potential of FP + 2D DIC as low-cost alternative for the analysis of large deformations problems.

Parallel processing in a host plus multiple array processor system for radar

NASA Technical Reports Server (NTRS)

Barkan, B. Z.

1983-01-01

Host plus multiple array processor architecture is demonstrated to yield a modular, fast, and cost-effective system for radar processing. Software methodology for programming such a system is developed. Parallel processing with pipelined data flow among the host, array processors, and discs is implemented. Theoretical analysis of performance is made and experimentally verified. The broad class of problems to which the architecture and methodology can be applied is indicated.

Cost-effective public health guidance: asking questions from the decision-maker's viewpoint.

PubMed

Chalkidou, Kalipso; Culyer, Anthony; Naidoo, Bhash; Littlejohns, Peter

2008-03-01

In February 2004, in his assessment of the long-term financial viability of the NHS, Derek Wanless recommended the use of 'a consistent framework, such as the methodology developed by NICE, to evaluate the cost-effectiveness of interventions and initiatives across health care and public health'. One year later public health was added to NICE's remit and the new National Institute for Health and Clinical Excellence (NICE) was established, with amended statutory instruments to permit consideration of broader public sector costs when developing cost-effective guidance for public health. With the principle of 'a consistent framework' put forward by Wanless as the starting point, this paper provides an insight into the most challenging aspects of applying the principles of cost-effectiveness analysis in the public health context from the policymaker's perspective. It reflects on the long-term consequences of taking on responsibility for producing public health guidance on the Institute's overall approach to guidance development and describes the tension between striving for consistency and cross-evaluation comparability while ensuring that the methodological tools used are fit for the purpose of developing public health guidance.

A Socio-Technical Exploration for Reducing & Mitigating the Risk of Retained Foreign Objects

PubMed Central

Corrigan, Siobhán; Kay, Alison; O’Byrne, Katie; Slattery, Dubhfeasa; Sheehan, Sharon; McDonald, Nick; Smyth, David; Mealy, Ken; Cromie, Sam

2018-01-01

A Retained Foreign Object (RFO) is a fairly infrequent but serious adverse event. An accurate rate of RFOs is difficult to establish due to underreporting but it has been estimated that incidences range between 1/1000 and 1/19,000 procedures. The cost of a RFO incident may be substantial and three-fold: (i) the cost to the patient of physical and/or psychological harm; (ii) the reputational cost to an institution and/or healthcare provider; and (iii) the financial cost to the taxpayer in the event of a legal claim. This Health Research Board-funded project aims to analyse and understand the problem of RFOs in surgical and maternity settings in Ireland and develop hospital-specific foreign object management processes and implementation roadmaps. This project will deploy an integrated evidence-based assessment methodology for social-technical modelling (Supply, Context, Organising, Process & Effects/ SCOPE Analysis Cube) and bow tie methodologies that focuses on managing the risks in effectively implementing and sustaining change. It comprises a multi-phase research approach that involves active and ongoing collaboration with clinical and other healthcare staff through each phase of the research. The specific objective of this paper is to present the methodological approach and outline the potential to produce generalisable results which could be applied to other health-related issues. PMID:29642646

What Are the Strength of Recommendations and Methodologic Reporting in Health Economic Studies in Orthopaedic Surgery?

PubMed

Makhni, Eric C; Steinhaus, Michael E; Swart, Eric; Bozic, Kevin J

2015-10-01

Cost-effectiveness research is an increasingly used tool in evaluating treatments in orthopaedic surgery. Without high-quality primary-source data, the results of a cost-effectiveness study are either unreliable or heavily dependent on sensitivity analyses of the findings from the source studies. However, to our knowledge, the strength of recommendations provided by these studies in orthopaedics has not been studied. We asked: (1) What are the strengths of recommendations in recent orthopaedic cost-effectiveness studies? (2) What are the reasons authors cite for weak recommendations? (3) What are the methodologic reporting practices used by these studies? The titles of all articles published in six different orthopaedic journals from January 1, 2004, through April 1, 2014, were scanned for original health economics studies comparing two different types of treatment or intervention. The full texts of included studies were reviewed to determine the strength of recommendations determined subjectively by our study team, with studies providing equivocal conclusions stemming from a lack or uncertainty surrounding key primary data classified as weak and those with definitive conclusions not lacking in high-quality primary data classified as strong. The reasons underlying a weak designation were noted, and methodologic practices reported in each of the studies were examined using a validated instrument. A total of 79 articles met our prespecified inclusion criteria and were evaluated in depth. Of the articles included, 50 (63%) provided strong recommendations, whereas 29 (37%) provided weak recommendations. Of the 29 studies, clinical outcomes data were cited in 26 references as being insufficient to provide definitive conclusions, whereas cost and utility data were cited in 13 and seven articles, respectively. Methodologic reporting practices varied greatly, with mixed adherence to framing, costs, and results reporting. The framing variables included clearly defined intervention, adequate description of a comparator, study perspective clearly stated, and reported discount rate for future costs and quality-adjusted life years. Reporting costs variables included economic data collected alongside a clinical trial or another primary source and clear statement of the year of monetary units. Finally, results reporting included whether a sensitivity analysis was performed. Given that a considerable portion of orthopaedic cost-effectiveness studies provide weak recommendations and that methodologic reporting practices varied greatly among strong and weak studies, we believe that clinicians should exercise great caution when considering the conclusions of cost-effectiveness studies. Future research could assess the effect of such cost-effectiveness studies in clinical practice, and whether the strength of recommendations of a study's conclusions has any effect on practice patterns. Given the increasing use of cost-effectiveness studies in orthopaedic surgery, understanding the quality of these studies and the reasons that limit the ability of studies to provide more definitive recommendations is critical. Highlighting the heterogeneity of methodologic reporting practices will aid clinicians in interpreting the conclusions of cost-effectiveness studies and improve future research efforts.

Methodological challenges when doing research that includes ethnic minorities: a scoping review.

PubMed

Morville, Anne-Le; Erlandsson, Lena-Karin

2016-11-01

There are challenging methodological issues in obtaining valid and reliable results on which to base occupational therapy interventions for ethnic minorities. The aim of this scoping review is to describe the methodological problems within occupational therapy research, when ethnic minorities are included. A thorough literature search yielded 21 articles obtained from the scientific databases PubMed, Cinahl, Web of Science and PsychInfo. Analysis followed Arksey and O'Malley's framework for scoping reviews, applying content analysis. The results showed methodological issues concerning the entire research process from defining and recruiting samples, the conceptual understanding, lack of appropriate instruments, data collection using interpreters to analyzing data. In order to avoid excluding the ethnic minorities from adequate occupational therapy research and interventions, development of methods for the entire research process is needed. It is a costly and time-consuming process, but the results will be valid and reliable, and therefore more applicable in clinical practice.

Operations and support cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

A standard description and costing methodology for the balance-of-plant items of a solar thermal electric power plant. Report of a multi-institutional working group

NASA Technical Reports Server (NTRS)

1983-01-01

Standard descriptions for solar thermal power plants are established and uniform costing methodologies for nondevelopmental balance of plant (BOP) items are developed. The descriptions and methodologies developed are applicable to the major systems. These systems include the central receiver, parabolic dish, parabolic trough, hemispherical bowl, and solar pond. The standard plant is defined in terms of four categories comprising (1) solar energy collection, (2) power conversion, (3) energy storage, and (4) balance of plant. Each of these categories is described in terms of the type and function of components and/or subsystems within the category. A detailed description is given for the BOP category. BOP contains a number of nondevelopmental items that are common to all solar thermal systems. A standard methodology for determining the costs of these nondevelopmental BOP items is given. The methodology is presented in the form of cost equations involving cost factors such as unit costs. A set of baseline values for the normalized cost factors is also given.

Planetary spacecraft cost modeling utilizing labor estimating relationships

NASA Technical Reports Server (NTRS)

Williams, Raymond

1990-01-01

A basic computerized technology is presented for estimating labor hours and cost of unmanned planetary and lunar programs. The user friendly methodology designated Labor Estimating Relationship/Cost Estimating Relationship (LERCER) organizes the forecasting process according to vehicle subsystem levels. The level of input variables required by the model in predicting cost is consistent with pre-Phase A type mission analysis. Twenty one program categories were used in the modeling. To develop the model, numerous LER and CER studies were surveyed and modified when required. The result of the research along with components of the LERCER program are reported.

[Parameter of evidence-based medicine in health care economics].

PubMed

Wasem, J; Siebert, U

1999-08-01

In the view of scarcity of resources, economic evaluations in health care, in which not only effects but also costs related to a medical intervention are examined and a incremental cost-outcome-ratio is build, are an important supplement to the program of evidence based medicine. Outcomes of a medical intervention can be measured by clinical effectiveness, quality-adjusted life years, and monetary evaluation of benefits. As far as costs are concerned, direct medical costs, direct non-medical costs and indirect costs have to be considered in an economic evaluation. Data can be used from primary studies or secondary analysis; metaanalysis for synthesizing of data may be adequate. For calculation of incremental cost-benefit-ratios, models of decision analysis (decision tree models, Markov-models) often are necessary. Methodological and ethical limits for application of the results of economic evaluation in resource allocation decision in health care have to be regarded: Economic evaluations and the calculation of cost-outcome-rations should only support decision making but cannot replace it.

Teleradiology from the provider's perspective-cost analysis for a mid-size university hospital.

PubMed

Rosenberg, Christian; Kroos, Kristin; Rosenberg, Britta; Hosten, Norbert; Flessa, Steffen

2013-08-01

Real costs of teleradiology services have not been systematically calculated. Pricing policies are not evidence-based. This study aims to prove the feasibility of performing an original cost analysis for teleradiology services and show break-even points to perform cost-effective practice. Based on the teleradiology services provided by the Greifswald University Hospital in northeastern Germany, a detailed process analysis and an activity-based costing model revealed costs per service unit according to eight examination categories. The Monte Carlo method was used to simulate the cost amplitude and identify pricing thresholds. Twenty-two sub-processes and four staff categories were identified. The average working time for one unit was 55 (x-ray) to 72 min (whole-body CT). Personnel costs were dominant (up to 68 %), representing lower limit costs. The Monte Carlo method showed the cost distribution per category according to the deficiency risk. Avoiding deficient pricing by a likelihood of 90 % increased the cost of a cranial CT almost twofold as compared with the lower limit cost. Original cost analysis is possible when providing teleradiology services with complex statutory requirements in place. Methodology and results provide useful data to help enhance efficiency in hospital management as well as implement realistic reimbursement fees. • Analysis of original costs of teleradiology is possible for a providing hospital • Results discriminate pricing thresholds and lower limit costs to perform cost-effective practice • The study methods represent a managing tool to enhance efficiency in providing facilities • The data are useful to help represent telemedicine services in regular medical fee schedules.

Understanding the essentials of economic evaluation.

PubMed

Schmid, G P

1995-01-01

Economic evaluation (EE) answers the following simple question: "From which course of action do we get the most value for our money?" We ask this question because resources are always limited, i.e., we never have enough money to do all the things we would like to do. Three types of economic evaluations are used: cost-effectiveness analysis, cost-utility analysis, and cost-benefit analysis. Although all involve a monetary and outcome comparison of two or more courses of action, the methodologies and outcomes of each type vary, making each one particularly suited for specific and different indications. Although the performance of an EE may be complex, its concept is intuitively simple. Understanding the basic elements of economic analysis is more and more important to all health-care providers because health-care policy makers at all levels are increasingly using EE for allocating resources.

Survivor experience of a child sexual abuse prevention program: a pilot study.

PubMed

Barron, Ian G; Topping, Keith J

2013-09-01

Addressing gaps in the research, the current study assesses the impact of a community-based child sexual abuse prevention program on known survivor knowledge/skills, disclosures, and subjective experience. Methodologically, novel measures of program fidelity and implementation cost are applied. A pre- posttest wait-list control design was utilized with intervention (n = 10) and comparison groups (n = 10). Measures included a standardized knowledge/skill questionnaire, coding of disclosures, subjective experience questionnaires, in-depth interviews, video analysis of program adherence, and a measure of cost. Analysis involved nonparametric tests and thematic analysis of interview and video data. Cost was calculated for the group and per survivor. Survivors achieved significant gains in knowledge/skills, made further disclosures, and were positive about their program experience. No gains were identified in the control group. Costs were small. Future studies need to explore survivor experience of programs delivered in classrooms.

Counting the costs of accreditation in acute care: an activity-based costing approach

PubMed Central

Mumford, Virginia; Greenfield, David; Hogden, Anne; Forde, Kevin; Westbrook, Johanna; Braithwaite, Jeffrey

2015-01-01

Objectives To assess the costs of hospital accreditation in Australia. Design Mixed methods design incorporating: stakeholder analysis; survey design and implementation; activity-based costs analysis; and expert panel review. Setting Acute care hospitals accredited by the Australian Council for Health Care Standards. Participants Six acute public hospitals across four States. Results Accreditation costs varied from 0.03% to 0.60% of total hospital operating costs per year, averaged across the 4-year accreditation cycle. Relatively higher costs were associated with the surveys years and with smaller facilities. At a national level these costs translate to $A36.83 million, equivalent to 0.1% of acute public hospital recurrent expenditure in the 2012 fiscal year. Conclusions This is the first time accreditation costs have been independently evaluated across a wide range of hospitals and highlights the additional cost burden for smaller facilities. A better understanding of the costs allows policymakers to assess alternative accreditation and other quality improvement strategies, and understand their impact across a range of facilities. This methodology can be adapted to assess international accreditation programmes. PMID:26351190

Association between component costs, study methodologies, and foodborne illness-related factors with the cost of nontyphoidal Salmonella illness.

PubMed

McLinden, Taylor; Sargeant, Jan M; Thomas, M Kate; Papadopoulos, Andrew; Fazil, Aamir

2014-09-01

Nontyphoidal Salmonella spp. are one of the most common causes of bacterial foodborne illness. Variability in cost inventories and study methodologies limits the possibility of meaningfully interpreting and comparing cost-of-illness (COI) estimates, reducing their usefulness. However, little is known about the relative effect these factors have on a cost-of-illness estimate. This is important for comparing existing estimates and when designing new cost-of-illness studies. Cost-of-illness estimates, identified through a scoping review, were used to investigate the association between descriptive, component cost, methodological, and foodborne illness-related factors such as chronic sequelae and under-reporting with the cost of nontyphoidal Salmonella spp. illness. The standardized cost of nontyphoidal Salmonella spp. illness from 30 estimates reported in 29 studies ranged from $0.01568 to $41.22 United States dollars (USD)/person/year (2012). The mean cost of nontyphoidal Salmonella spp. illness was $10.37 USD/person/year (2012). The following factors were found to be significant in multiple linear regression (p≤0.05): the number of direct component cost categories included in an estimate (0-4, particularly long-term care costs) and chronic sequelae costs (inclusion/exclusion), which had positive associations with the cost of nontyphoidal Salmonella spp. illness. Factors related to study methodology were not significant. Our findings indicated that study methodology may not be as influential as other factors, such as the number of direct component cost categories included in an estimate and costs incurred due to chronic sequelae. Therefore, these may be the most important factors to consider when designing, interpreting, and comparing cost of foodborne illness studies.

A Practical Methodology for Disaggregating the Drivers of Drug Costs Using Administrative Data.

PubMed

Lungu, Elena R; Manti, Orlando J; Levine, Mitchell A H; Clark, Douglas A; Potashnik, Tanya M; McKinley, Carol I

2017-09-01

Prescription drug expenditures represent a significant component of health care costs in Canada, with estimates of $28.8 billion spent in 2014. Identifying the major cost drivers and the effect they have on prescription drug expenditures allows policy makers and researchers to interpret current cost pressures and anticipate future expenditure levels. To identify the major drivers of prescription drug costs and to develop a methodology to disaggregate the impact of each of the individual drivers. The methodology proposed in this study uses the Laspeyres approach for cost decomposition. This approach isolates the effect of the change in a specific factor (e.g., price) by holding the other factor(s) (e.g., quantity) constant at the base-period value. The Laspeyres approach is expanded to a multi-factorial framework to isolate and quantify several factors that drive prescription drug cost. Three broad categories of effects are considered: volume, price and drug-mix effects. For each category, important sub-effects are quantified. This study presents a new and comprehensive methodology for decomposing the change in prescription drug costs over time including step-by-step demonstrations of how the formulas were derived. This methodology has practical applications for health policy decision makers and can aid researchers in conducting cost driver analyses. The methodology can be adjusted depending on the purpose and analytical depth of the research and data availability. © 2017 Journal of Population Therapeutics and Clinical Pharmacology. All rights reserved.

Reliability-Based Stability Analysis of Rock Slopes Using Numerical Analysis and Response Surface Method

NASA Astrophysics Data System (ADS)

Dadashzadeh, N.; Duzgun, H. S. B.; Yesiloglu-Gultekin, N.

2017-08-01

While advanced numerical techniques in slope stability analysis are successfully used in deterministic studies, they have so far found limited use in probabilistic analyses due to their high computation cost. The first-order reliability method (FORM) is one of the most efficient probabilistic techniques to perform probabilistic stability analysis by considering the associated uncertainties in the analysis parameters. However, it is not possible to directly use FORM in numerical slope stability evaluations as it requires definition of a limit state performance function. In this study, an integrated methodology for probabilistic numerical modeling of rock slope stability is proposed. The methodology is based on response surface method, where FORM is used to develop an explicit performance function from the results of numerical simulations. The implementation of the proposed methodology is performed by considering a large potential rock wedge in Sumela Monastery, Turkey. The accuracy of the developed performance function to truly represent the limit state surface is evaluated by monitoring the slope behavior. The calculated probability of failure is compared with Monte Carlo simulation (MCS) method. The proposed methodology is found to be 72% more efficient than MCS, while the accuracy is decreased with an error of 24%.

Accounting for the cost of scaling-up health interventions.

PubMed

Johns, Benjamin; Baltussen, Rob

2004-11-01

Recent studies such as the Commission on Macroeconomics and Health have highlighted the need for expanding the coverage of services for HIV/AIDS, malaria, tuberculosis, immunisations and other diseases. In order for policy makers to plan for these changes, they need to analyse the change in costs when interventions are 'scaled-up' to cover greater percentages of the population. Previous studies suggest that applying current unit costs to an entire population can misconstrue the true costs of an intervention. This study presents the methodology used in WHO-CHOICE's generalised cost effectiveness analysis, which includes non-linear cost functions for health centres, transportation and supervision costs, as well as the presence of fixed costs of establishing a health infrastructure. Results show changing marginal costs as predicted by economic theory. 2004 John Wiley & Sons, Ltd.

Measuring routine nursing service efficiency: a comparison of cost per patient day and data envelopment analysis models.

PubMed Central

Nunamaker, T R

1983-01-01

This article provides an illustrative application of Data Envelopment Analysis (DEA) methodology to the measurement of routine nursing service efficiency at a group of Wisconsin hospitals. The DEA efficiency ratings and cost savings estimates are then compared to those resulting from application of Medicare's routine cost limitation to the sample data. DEA is also used to determine if any changes in the potential for efficient operations occurred during the 1978-1979 period. Empirical results were representative of the fundamental differences existing between the DEA and cost per patient day approaches. No evidence was found to support the notion that the overall potential for efficient delivery of routine services by the sample institutions was greater in one year than another. PMID:6874357

Do Heat Pump Clothes Dryers Make Sense for the U.S. Market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Steve; Franco, Victor; Lekov, Alex

Heat pump clothes dryers (HPCDs) can be as much as 50percent more energy-efficient than conventional electric resistance clothes dryers, and therefore have the potential to save substantial amounts of electricity. While not currently available in the U.S., there are manufacturers in Europe and Japan that produce units for those markets. Drawing on analysis conducted for the U.S. Department of Energy's (DOE) current rulemaking on amended standards for clothes dryers, this paper evaluates the cost-effectiveness of HPCDs in American homes, as well as the national impact analysis for different market share scenarios. In order to get an accurate measurement of realmore » energy savings potential, the paper offers a new energy use calculation methodology that takes into account the most current data on clothes washer cycles, clothes dryer usage frequency, remaining moisture content, and load weight per cycle, which is very different from current test procedure values. Using the above methodology along with product cost estimates developed by DOE, the paper presents the results of a life-cycle cost analysis of the adoption of HPCDs in a representative sample of American homes. The results show that HPCDs have positive economic benefits only for households with high clothes dryer usage or for households with high electricity prices and moderately high utilization.« less

The total assessment profile, volume 1. [including societal impact cost effectiveness, and economic analysis

NASA Technical Reports Server (NTRS)

Leininger, G.; Jutila, S.; King, J.; Muraco, W.; Hansell, J.; Lindeen, J.; Franckowiak, E.; Flaschner, A.

1975-01-01

A methodology is described for the evaluation of societal impacts associated with the implementation of a new technology. Theoretical foundations for the methodology, called the total assessment profile, are established from both the economic and social science perspectives. The procedure provides for accountability of nonquantifiable factors and measures through the use of a comparative value matrix by assessing the impacts of the technology on the value system of the society.

Wildland fire management. Volume 1: Prevention methods and analysis. [systems engineering approach to California fire problems

NASA Technical Reports Server (NTRS)

Weissenberger, S. (Editor)

1973-01-01

A systems engineering approach is reported for the problem of reducing the number and severity of California's wildlife fires. Prevention methodologies are reviewed and cost benefit models are developed for making preignition decisions.

Analysis of travel-time reliability for freight corridors connecting the Pacific Northwest.

DOT National Transportation Integrated Search

2012-11-01

A new methodology and algorithms were developed to combine diverse data sources and to estimate the impacts of recurrent and non-recurrent : congestion on freight movements reliability and delays, costs, and emissions. The results suggest that tra...

Benefits of public roadside safety rest areas in Texas : technical report.

DOT National Transportation Integrated Search

2011-05-01

The objective of this investigation was to develop a benefit-cost analysis methodology for safety rest areas in : Texas and to demonstrate its application in select corridors throughout the state. In addition, this project : considered novel safety r...

Analysis of maintenance costing with emphasis on contracting versus using state forces.

DOT National Transportation Integrated Search

1982-01-01

The authors present the findings of a study to develop a methodology for analyzing decisions of whether to perform ordinary maintenance, maintenance replacement, and incidental construction with state forces or to let them to contract. In developing ...

Reliability based design optimization: Formulations and methodologies

NASA Astrophysics Data System (ADS)

Agarwal, Harish

Modern products ranging from simple components to complex systems should be designed to be optimal and reliable. The challenge of modern engineering is to ensure that manufacturing costs are reduced and design cycle times are minimized while achieving requirements for performance and reliability. If the market for the product is competitive, improved quality and reliability can generate very strong competitive advantages. Simulation based design plays an important role in designing almost any kind of automotive, aerospace, and consumer products under these competitive conditions. Single discipline simulations used for analysis are being coupled together to create complex coupled simulation tools. This investigation focuses on the development of efficient and robust methodologies for reliability based design optimization in a simulation based design environment. Original contributions of this research are the development of a novel efficient and robust unilevel methodology for reliability based design optimization, the development of an innovative decoupled reliability based design optimization methodology, the application of homotopy techniques in unilevel reliability based design optimization methodology, and the development of a new framework for reliability based design optimization under epistemic uncertainty. The unilevel methodology for reliability based design optimization is shown to be mathematically equivalent to the traditional nested formulation. Numerical test problems show that the unilevel methodology can reduce computational cost by at least 50% as compared to the nested approach. The decoupled reliability based design optimization methodology is an approximate technique to obtain consistent reliable designs at lesser computational expense. Test problems show that the methodology is computationally efficient compared to the nested approach. A framework for performing reliability based design optimization under epistemic uncertainty is also developed. A trust region managed sequential approximate optimization methodology is employed for this purpose. Results from numerical test studies indicate that the methodology can be used for performing design optimization under severe uncertainty.

Methodology for Estimating Total Automotive Manufacturing Costs

DOT National Transportation Integrated Search

1983-04-01

A number of methodologies for estimating manufacturing costs have been developed. This report discusses the different approaches and shows that an approach to estimating manufacturing costs in the automobile industry based on surrogate plants is pref...

Vaccines are different: A systematic review of budget impact analyses of vaccines.

PubMed

Loze, Priscilla Magalhaes; Nasciben, Luciana Bertholim; Sartori, Ana Marli Christovam; Itria, Alexander; Novaes, Hillegonda Maria Dutilh; de Soárez, Patrícia Coelho

2017-05-15

Several countries require manufacturers to present a budget impact analysis (BIA), together with a cost-effectiveness analysis, to support national funding requests. However, guidelines for conducting BIA of vaccines are scarce. To analyze the methodological approaches used in published budget impact analysis (BIA) of vaccines, discussing specific methodological issues related to vaccines. This systematic review of the literature on BIA of vaccines was carried out in accordance with the Centre for Reviews and Dissemination - CRD guidelines. We searched multiple databases: MedLine, Embase, Biblioteca Virtual de Saúde (BVS), Cochrane Library, DARE Database, NHS Economic Evaluation Database (NHS EED), HTA Database (via Centre for Reviews and Dissemination - CRD), and grey literature. Two researchers, working independently, selected the studies and extracted the data. The methodology quality of individual studies was assessed using the ISPOR 2012 Budget Impact Analysis Good Practice II Task Force. A qualitative narrative synthesis was conducted. Twenty-two studies were reviewed. The most frequently evaluated vaccines were pneumococcal (41%), influenza (23%) and rotavirus (18%). The target population was stated in 21 studies (95%) and the perspective was clear in 20 (91%). Only 36% reported the calculations used to complete the BIA, 27% informed the total and disaggregated costs for each time period, and 9% showed the change in resource use for each time period. More than half of the studies (55%, n=12) reported less than 50% of the items recommended in the checklist. The production of BIA of vaccines has increased from 2009. The report of the methodological steps was unsatisfactory, making it difficult to assess the validity of the results presented. Vaccines specific issues should be discussed in international guidelines for BIA of vaccines, to improve the quality of the studies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Methodology for Determining the Avoidable and Fully Allocated Costs of Amtrak Routes : Volume II, Appendix A

DOT National Transportation Integrated Search

2009-08-01

The Federal Railroad Administration tasked the Volpe Center with developing a methodology for determining the avoidable and fully allocated costs of Amtrak routes. Avoidable costs are costs that would not be incurred if an Amtrak route were discontin...

Methodology for Determining the Avoidable and Fully Allocated Costs of Amtrak Routes : Volume III, Appendix B-H

DOT National Transportation Integrated Search

2009-08-01

The Federal Railroad Administration tasked the Volpe Center with developing a methodology for determining the avoidable and fully allocated costs of Amtrak routes. Avoidable costs are costs that would not be incurred if an Amtrak route were discontin...

Methodology for determining the avoidable and fully allocated costs of Amtrak routes, volume 1 : main report

DOT National Transportation Integrated Search

2009-08-01

The Federal Railroad Administration tasked the Volpe Center with developing a methodology for determining the avoidable and fully allocated costs of Amtrak routes. Avoidable costs are costs that would not be incurred if an Amtrak route were discontin...

A Process Improvement Study on a Military System of Clinics to Manage Patient Demand and Resource Utilization Using Discrete-Event Simulation, Sensitivity Analysis, and Cost-Benefit Analysis

DTIC Science & Technology

2015-03-12

26 Table 3: Optometry Clinic Frequency Count... Optometry Clinic Frequency Count.................................................................. 86 Table 22: Probability Distribution Summary Table...Clinic, the Audiology Clinic, and the Optometry Clinic. Methodology Overview The overarching research goal is to identify feasible solutions to

Methods of cost-effectiveness analysis in the evaluation of new antipsychotics: implications for schizophrenia treatment.

PubMed

Neumann, P J

1999-01-01

Because health care payers are increasingly interested in learning whether new treatments offer value for money, there has been an abundance of research into the cost-effectiveness of pharmacologic therapies in the United States. In the past few years, a number of studies comparing the cost-effectiveness of the conventional neuroleptics with that of the atypical antipsychotics have been published. Cost-effectiveness analyses show the relationship between the resources used (costs) and the health benefits achieved (effects) for a health or medical intervention compared with an alternative strategy. Ideally, the analyses can help decision makers improve the health of the population by better allocating society's limited health care resources. However, the extent to which cost-effectiveness data are actually used in decision making is unclear. The analyses are sometimes viewed with skepticism, in part because studies differ in their methodological approaches. Recently, the U.S. Panel on Cost-Effectiveness in Health and Medicine offered recommendations for standard methodological practices, which may help improve the quality of studies and the acceptability of the approach in the future. The issue is particularly important in light of new legislation governing how the Food and Drug Administration will regulate promotional claims made by drug companies regarding health economic information.

The Economic Costs of Reserve Forces Utilization: An Analysis of Their Employment in Fighting the Global War on Terrorism

DTIC Science & Technology

2007-12-01

significantly affecting American society. Part of the cost is associated with the employment of the Reserve Forces, who are often subject to multiple ...he’s been able to quantify that comprise the total cost of the war in Iraq over a decade-long time frame ranging from 2003- 2012 . Such a methodology...configurations.”70 It’s genesis flowed in the Army’s desire to raise the number of total active divisions without a change in active duty personnel

Comparative Effectiveness Research in Oncology

PubMed Central

2013-01-01

Although randomized controlled trials represent the gold standard for comparative effective research (CER), a number of additional methods are available when randomized controlled trials are lacking or inconclusive because of the limitations of such trials. In addition to more relevant, efficient, and generalizable trials, there is a need for additional approaches utilizing rigorous methodology while fully recognizing their inherent limitations. CER is an important construct for defining and summarizing evidence on effectiveness and safety and comparing the value of competing strategies so that patients, providers, and policymakers can be offered appropriate recommendations for optimal patient care. Nevertheless, methodological as well as political and social challenges for CER remain. CER requires constant and sophisticated methodological oversight of study design and analysis similar to that required for randomized trials to reduce the potential for bias. At the same time, if appropriately conducted, CER offers an opportunity to identify the most effective and safe approach to patient care. Despite rising and unsustainable increases in health care costs, an even greater challenge to the implementation of CER arises from the social and political environment questioning the very motives and goals of CER. Oncologists and oncology professional societies are uniquely positioned to provide informed clinical and methodological expertise to steer the appropriate application of CER toward critical discussions related to health care costs, cost-effectiveness, and the comparative value of the available options for appropriate care of patients with cancer. PMID:23697601

The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

NASA Astrophysics Data System (ADS)

Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

2016-06-01

Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

How to Measure Costs and Benefits of eHealth Interventions: An Overview of Methods and Frameworks

PubMed Central

2015-01-01

Information on the costs and benefits of eHealth interventions is needed, not only to document value for money and to support decision making in the field, but also to form the basis for developing business models and to facilitate payment systems to support large-scale services. In the absence of solid evidence of its effects, key decision makers may doubt the effectiveness, which, in turn, limits investment in, and the long-term integration of, eHealth services. However, it is not realistic to conduct economic evaluations of all eHealth applications and services in all situations, so we need to be able to generalize from those we do conduct. This implies that we have to select the most appropriate methodology and data collection strategy in order to increase the transferability across evaluations. This paper aims to contribute to the understanding of how to apply economic evaluation methodology in the eHealth field. It provides a brief overview of basic health economics principles and frameworks and discusses some methodological issues and challenges in conducting cost-effectiveness analysis of eHealth interventions. Issues regarding the identification, measurement, and valuation of costs and benefits are outlined. Furthermore, this work describes the established techniques of combining costs and benefits, presents the decision rules for identifying the preferred option, and outlines approaches to data collection strategies. Issues related to transferability and complexity are also discussed. PMID:26552360

Cost benefit analysis of remediation alternatives for controlling the flux of strontium-90 into the Columbia River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustafson, F.W.; Todd, M.E.

1993-09-01

The release of large volumes of water to waste disposal cribs at the Hanford Site`s 100-N Area caused contaminants, principally strontium-90, to be carried toward the Columbia River through the groundwater. Since shutdown of the N Reactor, these releases have been discontinued, although small water flows continue to be discharged to the 1325-N crib. Most of the contamination which is now transported to the river is occurring as a result of the natural groundwater movement. The contaminated groundwater at N Springs flows into the river through seeps and springs along the river`s edge. An expedited response action (ERA) has beenmore » proposed to eliminate or restrict the flux of strontium-90 into the river. A cost benefit analysis of potential remedial alternatives was completed that recommends the alternative which best meets given selection criteria prescribed by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The methodology used for evaluation, cost analysis, and alternative recommendation is the engineering evaluation/cost analysis (EE/CA). Complete remediation of the contaminated groundwater beneath 100-N Area was not a principal objective of the analysis. The objective of the cost benefit analysis was to identify a remedial alternative that optimizes the degree of benefit produced for the costs incurred.« less

High-Resolution Melting Analysis for Rapid Detection of Sequence Type 131 Escherichia coli.

PubMed

Harrison, Lucas B; Hanson, Nancy D

2017-06-01

Escherichia coli isolates belonging to the sequence type 131 (ST131) clonal complex have been associated with the global distribution of fluoroquinolone and β-lactam resistance. Whole-genome sequencing and multilocus sequence typing identify sequence type but are expensive when evaluating large numbers of samples. This study was designed to develop a cost-effective screening tool using high-resolution melting (HRM) analysis to differentiate ST131 from non-ST131 E. coli in large sample populations in the absence of sequence analysis. The method was optimized using DNA from 12 E. coli isolates. Singleplex PCR was performed using 10 ng of DNA, Type-it HRM buffer, and multilocus sequence typing primers and was followed by multiplex PCR. The amplicon sizes ranged from 630 to 737 bp. Melt temperature peaks were determined by performing HRM analysis at 0.1°C resolution from 50 to 95°C on a Rotor-Gene Q 5-plex HRM system. Derivative melt curves were compared between sequence types and analyzed by principal component analysis. A blinded study of 191 E. coli isolates of ST131 and unknown sequence types validated this methodology. This methodology returned 99.2% specificity (124 true negatives and 1 false positive) and 100% sensitivity (66 true positives and 0 false negatives). This HRM methodology distinguishes ST131 from non-ST131 E. coli without sequence analysis. The analysis can be accomplished in about 3 h in any laboratory with an HRM-capable instrument and principal component analysis software. Therefore, this assay is a fast and cost-effective alternative to sequencing-based ST131 identification. Copyright © 2017 Harrison and Hanson.

Corporate cost of occupational accidents: an activity-based analysis.

PubMed

Rikhardsson, Pall M; Impgaard, Martin

2004-03-01

The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents for a company with 3.600 employees was estimated to approximately US$ 682.000. The paper includes an introduction regarding accident cost analysis in companies, a presentation of the SACA project methodology and the SACA method itself, a short overview of some of the results of the SACA project and a conclusion. Further information about the project is available at http://www.asb.dk/saca.

Physician Awareness of Drug Cost: A Systematic Review

PubMed Central

Allan, G. Michael; Lexchin, Joel; Wiebe, Natasha

2007-01-01

Background Pharmaceutical costs are the fastest-growing health-care expense in most developed countries. Higher drug costs have been shown to negatively impact patient outcomes. Studies suggest that doctors have a poor understanding of pharmaceutical costs, but the data are variable and there is no consistent pattern in awareness. We designed this systematic review to investigate doctors' knowledge of the relative and absolute costs of medications and to determine the factors that influence awareness. Methods and Findings Our search strategy included The Cochrane Library, EconoLit, EMBASE, and MEDLINE as well as reference lists and contact with authors who had published two or more articles on the topic or who had published within 10 y of the commencement of our review. Studies were included if: either doctors, trainees (interns or residents), or medical students were surveyed; there were more than ten survey respondents; cost of pharmaceuticals was estimated; results were expressed quantitatively; there was a clear description of how authors defined “accurate estimates”; and there was a description of how the true cost was determined. Two authors reviewed each article for eligibility and extracted data independently. Cost accuracy outcomes were summarized, but data were not combined in meta-analysis because of extensive heterogeneity. Qualitative data related to physicians and drug costs were also extracted. The final analysis included 24 articles. Cost accuracy was low; 31% of estimates were within 20% or 25% of the true cost, and fewer than 50% were accurate by any definition of cost accuracy. Methodological weaknesses were common, and studies of low methodological quality showed better cost awareness. The most important factor influencing the pattern and accuracy of estimation was the true cost of therapy. High-cost drugs were estimated more accurately than inexpensive ones (74% versus 31%, Chi-square p < 0.001). Doctors consistently overestimated the cost of inexpensive products and underestimated the cost of expensive ones (binomial test, 89/101, p < 0.001). When asked, doctors indicated that they want cost information and feel it would improve their prescribing but that it is not accessible. Conclusions Doctors' ignorance of costs, combined with their tendency to underestimate the price of expensive drugs and overestimate the price of inexpensive ones, demonstrate a lack of appreciation of the large difference in cost between inexpensive and expensive drugs. This discrepancy in turn could have profound implications for overall drug expenditures. Much more focus is required in the education of physicians about costs and the access to cost information. Future research should focus on the accessibility and reliability of medical cost information and whether the provision of this information is used by doctors and makes a difference to physician prescribing. Additionally, future work should strive for higher methodological standards to avoid the biases we found in the current literature, including attention to the method of assessing accuracy that allows larger absolute estimation ranges for expensive drugs. PMID:17896856

Physician awareness of drug cost: a systematic review.

PubMed

Allan, G Michael; Lexchin, Joel; Wiebe, Natasha

2007-09-01

Pharmaceutical costs are the fastest-growing health-care expense in most developed countries. Higher drug costs have been shown to negatively impact patient outcomes. Studies suggest that doctors have a poor understanding of pharmaceutical costs, but the data are variable and there is no consistent pattern in awareness. We designed this systematic review to investigate doctors' knowledge of the relative and absolute costs of medications and to determine the factors that influence awareness. Our search strategy included The Cochrane Library, EconoLit, EMBASE, and MEDLINE as well as reference lists and contact with authors who had published two or more articles on the topic or who had published within 10 y of the commencement of our review. Studies were included if: either doctors, trainees (interns or residents), or medical students were surveyed; there were more than ten survey respondents; cost of pharmaceuticals was estimated; results were expressed quantitatively; there was a clear description of how authors defined "accurate estimates"; and there was a description of how the true cost was determined. Two authors reviewed each article for eligibility and extracted data independently. Cost accuracy outcomes were summarized, but data were not combined in meta-analysis because of extensive heterogeneity. Qualitative data related to physicians and drug costs were also extracted. The final analysis included 24 articles. Cost accuracy was low; 31% of estimates were within 20% or 25% of the true cost, and fewer than 50% were accurate by any definition of cost accuracy. Methodological weaknesses were common, and studies of low methodological quality showed better cost awareness. The most important factor influencing the pattern and accuracy of estimation was the true cost of therapy. High-cost drugs were estimated more accurately than inexpensive ones (74% versus 31%, Chi-square p < 0.001). Doctors consistently overestimated the cost of inexpensive products and underestimated the cost of expensive ones (binomial test, 89/101, p < 0.001). When asked, doctors indicated that they want cost information and feel it would improve their prescribing but that it is not accessible. Doctors' ignorance of costs, combined with their tendency to underestimate the price of expensive drugs and overestimate the price of inexpensive ones, demonstrate a lack of appreciation of the large difference in cost between inexpensive and expensive drugs. This discrepancy in turn could have profound implications for overall drug expenditures. Much more focus is required in the education of physicians about costs and the access to cost information. Future research should focus on the accessibility and reliability of medical cost information and whether the provision of this information is used by doctors and makes a difference to physician prescribing. Additionally, future work should strive for higher methodological standards to avoid the biases we found in the current literature, including attention to the method of assessing accuracy that allows larger absolute estimation ranges for expensive drugs.

Burn care delivery in a sub-saharan african unit: A cost analysis study.

PubMed

Gallaher, Jared R; Mjuweni, Stephen; Cairns, Bruce A; Charles, Anthony G

2015-07-01

There are significant resource challenges to burn surgical care delivery in low and middle-income countries at baseline and only a few burn cost analysis studies from sub-Saharan Africa have been performed. This is a retrospective database analysis of prospectively collected data from all patients recorded in the burn registry between June 2011 and August 2014 located at the Kamuzu Central Hospital Burn Unit in Lilongwe, Malawi. We utilized activity-based costing, a bottom-up cost analysis methodology with cost allocation that allows determination of unit cost or cost per service. 905 patients were admitted to the burn unit during the study period. The calculated total monthly burn expenditure for all cost centers was $11,622.66. Per day, the total unit cost was $387.42 with a mean daily per-patient cost of $24.26 (SD ± $6.44). Consequently, the mean cost per in-patient admission was $559.85 (SD ± $736.17). The mean daily cost per 1% total burn surface per patient at our center is $2.65 (SD ± $3.01). This burn care cost analysis study helps quantify the relative contribution of differing cost centers that comprise burn care delivery and hospital costs in a sub-Saharan African setting. Accurate and relevant cost information on hospital services at the patient level is therefore fundamental for policy makers, payers, and hospitals. Our study has demonstrated that comprehensive burn care is possible at a cost much lower than found in other burn centers in low or middle-income countries and can be sustained with moderate funding. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

A methodology for commonality analysis, with applications to selected space station systems

NASA Technical Reports Server (NTRS)

Thomas, Lawrence Dale

1989-01-01

The application of commonality in a system represents an attempt to reduce costs by reducing the number of unique components. A formal method for conducting commonality analysis has not been established. In this dissertation, commonality analysis is characterized as a partitioning problem. The cost impacts of commonality are quantified in an objective function, and the solution is that partition which minimizes this objective function. Clustering techniques are used to approximate a solution, and sufficient conditions are developed which can be used to verify the optimality of the solution. This method for commonality analysis is general in scope. It may be applied to the various types of commonality analysis required in the conceptual, preliminary, and detail design phases of the system development cycle.

Health economics evaluation of a gastric cancer early detection and treatment program in China.

PubMed

Li, Dan; Yuan, Yuan; Sun, Li-Ping; Fang, Xue; Zhou, Bao-Sen

2014-01-01

To use health economics methodology to assess the screening program on gastric cancer in Zhuanghe, China, so as to provide the basis for health decision on expanding the program of early detection and treatment. The expense of an early detection and treatment program for gastric cancer in patients found by screening, and also costs of traditional treatment in a hospital of Zhuanghe were assessed. Three major techniques of medical economics, namely cost-effective analysis (CEA), cost-benefit analysis (CBA) and cost-utility analysis (CUA), were used to assess the screening program. RESULTS from CEA showed that investing every 25, 235 Yuan on screening program in Zhuanghe area, one gastric cancer patient could be saved. Data from CUA showed that it was cost 1, 370 Yuan per QALY saved. RESULTS from CBA showed that: the total cost was 1,945,206 Yuan with a benefit as 8,669,709 Yuan and an CBR of 4.46. The early detection and treatment program of gastric cancer appears economic and society-beneficial. We suggest that it should be carry out in more high risk areas for gastric cancer.

Development of a cost-effectiveness analysis of leafy green marketing agreement irrigation water provisions.

PubMed

Jensen, Helen H; Pouliot, Sébastien; Wang, Tong; Jay-Russell, Michele T

2014-06-01

An analysis of the effectiveness of meeting the irrigation water provisions of the Leafy Green Marketing Agreement (LGMA) relative to its costs provides an approach to evaluating the cost-effectiveness of good agricultural practices that uses available data. A case example for lettuce is used to evaluate data requirements and provide a methodological example to determine the cost-effectiveness of the LGMA water quality provision. Both cost and field data on pathogen or indicator bacterial levels are difficult and expensive to obtain prospectively. Therefore, methods to use existing field and experimental data are required. Based on data from current literature and experimental studies, we calculate a cost-efficiency ratio that expresses the reduction in E. coli concentration per dollar expenditure on testing of irrigation water. With appropriate data, the same type of analysis can be extended to soil amendments and other practices and to evaluation of public benefits of practices used in production. Careful use of existing and experimental data can lead to evaluation of an expanded set of practices.

Pilot Project Technology Business Case: Mobile Work Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken; Lawrie, Sean; Niedermuller, Josef

Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such thatmore » it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are “harvestable,” meaning they result in an actual reduction in headcount and/or cost. The report describes the specific activities conducted with a partner utility to examine the various work activities associated with mobile work packages to determine what time savings and error rate reductions are available. The report summarizes these findings in the form of a business case for the technology.« less

Unit Cost Analysis of PET-CT at an Apex Public Sector Health Care Institute in India.

PubMed

Gajuryal, S H; Daga, A; Siddharth, V; Bal, C S; Satpathy, S

2017-01-01

PET/CT scan service is one of the capital intensive and revenue-generating centres of a tertiary care hospital. The cost associated with the provisioning of PET services is dependent upon the unit costs of the resources consumed. The study aims to determine the cost of providing PET/CT Scan services in a hospital. This descriptive and observational study was conducted in the Department of Nuclear Medicine at a tertiary apex teaching hospital in New Delhi, India in the year 2014-15. Traditional costing methodology was used for calculating the unit cost of PET/CT scan service. The cost was calculated under two heads that is capital and operating cost. Annualized cost of capital assets was calculated using methodology prescribed by WHO and operating costs was taken on an actual basis. Average number of PET/CT scan performed in a day is 30. The annual cost of providing PET/CT scan services was calculated to be 65,311,719 Indian Rupees (INR) (US$ 1,020,496), while the unit cost of PET scan was calculated to be 9625.92 INR (US$ 150). 3/4th cost was spent on machinery and equipment (75.3%) followed by healthcare personnel (11.37%), electricity (5%), consumables and supplies (4%) engineering maintenance (3.24%), building, furniture and HVAC capital cost (0.76%), and manifold cost (0.05%). Of the total cost, 76% was capital cost while the remaining was operating cost. Total cost for establishing PET/CT scan facility with cyclotron and chemistry module and PET/CT scan without cyclotron and chemistry module was calculated to be INR 610,873,517 (US$9944899) and 226,745,158 (US$3542893), respectively. (US$ 1=INR 64).

A systematic review of the cost and cost-effectiveness of electronic discharge communications

PubMed Central

Sevick, Laura K; Esmail, Rosmin; Tang, Karen; Lorenzetti, Diane L; Ronksley, Paul; James, Matthew; Santana, Maria; Ghali, William A; Clement, Fiona

2017-01-01

Background The transition between acute care and community care can be a vulnerable period in a patients’ treatment due to the potential for postdischarge adverse events. The vulnerability of this period has been attributed to factors related to the miscommunication between hospital-based and community-based physicians. Electronic discharge communication has been proposed as one solution to bridge this communication gap. Prior to widespread implementation of these tools, the costs and benefits should be considered. Objective To establish the cost and cost-effectiveness of electronic discharge communications compared with traditional discharge systems for individuals who have completed care with one provider and are transitioning care to a new provider. Methods We conducted a systematic review of the published literature, using best practices, to identify economic evaluations/cost analyses of electronic discharge communication tools. Inclusion criteria were: (1) economic analysis and (2) electronic discharge communication tool as the intervention. Quality of each article was assessed, and data were summarised using a component-based analysis. Results One thousand unique abstracts were identified, and 57 full-text articles were assessed for eligibility. Four studies met final inclusion criteria. These studies varied in their primary objectives, methodology, costs reported and outcomes. All of the studies were of low to good quality. Three of the studies reported a cost-effectiveness measure ranging from an incremental daily cost of decreasing average discharge note completion by 1 day of $0.331 (2003 Canadian), a cost per page per discharge letter of €9.51 and a dynamic net present value of €31.1 million for a 5-year implementation of the intervention. None of the identified studies considered clinically meaningful patient or quality outcomes. Discussion Economic analyses of electronic discharge communications are scarcely reported, and with inconsistent methodology and outcomes. Further studies are needed to understand the cost-effectiveness and value for patient care. PMID:28674136

The role of pharmacoeconomics in current Indian healthcare system.

PubMed

Ahmad, Akram; Patel, Isha; Parimilakrishnan, Sundararajan; Mohanta, Guru Prasad; Chung, HaeChung; Chang, Jongwha

2013-01-01

Phamacoeconomics can aid the policy makers and the healthcare providers in decision making in evaluating the affordability of and access to rational drug use. Efficiency is a key concept of pharmacoeconomics, and various strategies are suggested for buying the greatest amount of benefits for a given resource use. Phamacoeconomic evaluation techniques such as cost minimization analysis, cost effectiveness analysis, cost benefit analysis, and cost utilization analysis, which support identification and quantification of cost of drugs, are conducted in a similar way, but vary in measurement of value of health benefits and outcomes. This article provides a brief overview about pharmacoeconomics, its utility with respect to the Indian pharmaceutical industry, and the expanding insurance system in India. Pharmacoeconomic evidences can be utilized to support decisions on licensing, pricing, reimbursement, and maintenance of formulary procedure of pharmaceuticals. For the insurance companies to give better facility at minimum cost, India must develop the platform for pharmacoeconomics with a validating methodology and appropriate training. The role of clinical pharmacists including PharmD graduates are expected to be more beneficial than the conventional pharmacists, as they will be able to apply the principles of economics in daily basis practice in community and hospital pharmacy.

Cost-effectiveness analysis: problems and promise for evaluating medical technology

NASA Astrophysics Data System (ADS)

Juday, Timothy R.

1994-12-01

Although using limited financial resources in the most beneficial way, in principle, a laudable goal, actually developing standards for measuring the cost-effectiveness of medical technologies and incorporating them into the coverage process is a much more difficult proposition. Important methodological difficulties include determining how to compare a technology to its leading alternative, defining costs, incorporating patient preferences, and defining health outcomes. In addition, more practical questions must be addressed. These questions include: who does the analysis? who makes the decisions? which technologies to evaluate? what resources are required? what is the political and legal environment? how much is a health outcome worth? The ultimate question that must be answered is what is a health outcome worth? Cost-effectiveness analysis cannot answer this question; it only enables comparison of cost-effectiveness ratios across technologies. In order to determine whether a technology should be covered, society or individual insurers must determine how much they are willing to pay for the health benefits. Conducting cost-effectiveness analysis will not remove the need to make difficult resource allocation decisions; however, explicitly examining the tradeoffs involved in these decisions should help to improve the process.

The role of pharmacoeconomics in current Indian healthcare system

PubMed Central

Ahmad, Akram; Patel, Isha; Parimilakrishnan, Sundararajan; Mohanta, Guru Prasad; Chung, HaeChung; Chang, Jongwha

2013-01-01

Phamacoeconomics can aid the policy makers and the healthcare providers in decision making in evaluating the affordability of and access to rational drug use. Efficiency is a key concept of pharmacoeconomics, and various strategies are suggested for buying the greatest amount of benefits for a given resource use. Phamacoeconomic evaluation techniques such as cost minimization analysis, cost effectiveness analysis, cost benefit analysis, and cost utilization analysis, which support identification and quantification of cost of drugs, are conducted in a similar way, but vary in measurement of value of health benefits and outcomes. This article provides a brief overview about pharmacoeconomics, its utility with respect to the Indian pharmaceutical industry, and the expanding insurance system in India. Pharmacoeconomic evidences can be utilized to support decisions on licensing, pricing, reimbursement, and maintenance of formulary procedure of pharmaceuticals. For the insurance companies to give better facility at minimum cost, India must develop the platform for pharmacoeconomics with a validating methodology and appropriate training. The role of clinical pharmacists including PharmD graduates are expected to be more beneficial than the conventional pharmacists, as they will be able to apply the principles of economics in daily basis practice in community and hospital pharmacy. PMID:24991597

Space Station man-machine automation trade-off analysis

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.; Bard, J.; Feinberg, A.

1985-01-01

The man machine automation tradeoff methodology presented is of four research tasks comprising the autonomous spacecraft system technology (ASST) project. ASST was established to identify and study system level design problems for autonomous spacecraft. Using the Space Station as an example spacecraft system requiring a certain level of autonomous control, a system level, man machine automation tradeoff methodology is presented that: (1) optimizes man machine mixes for different ground and on orbit crew functions subject to cost, safety, weight, power, and reliability constraints, and (2) plots the best incorporation plan for new, emerging technologies by weighing cost, relative availability, reliability, safety, importance to out year missions, and ease of retrofit. A fairly straightforward approach is taken by the methodology to valuing human productivity, it is still sensitive to the important subtleties associated with designing a well integrated, man machine system. These subtleties include considerations such as crew preference to retain certain spacecraft control functions; or valuing human integration/decision capabilities over equivalent hardware/software where appropriate.

Cost consideration in the clinical guidance documents of physician specialty societies in the United States.

PubMed

Schwartz, Jennifer A T; Pearson, Steven D

2013-06-24

Despite increasing concerns regarding the cost of health care, the consideration of costs in the development of clinical guidance documents by physician specialty societies has received little analysis. To evaluate the approach to consideration of cost in publicly available clinical guidance documents and methodological statements produced between 2008 and 2012 by the 30 largest US physician specialty societies. Qualitative document review. Whether costs are considered in clinical guidance development, mechanism of cost consideration, and the way that cost issues were used in support of specific clinical practice recommendations. Methodological statements for clinical guidance documents indicated that 17 of 30 physician societies (57%) explicitly integrated costs, 4 (13%) implicitly considered costs, 3 (10%) intentionally excluded costs, and 6 (20%) made no mention. Of the 17 societies that explicitly integrated costs, 9 (53%) consistently used a formal system in which the strength of recommendation was influenced in part by costs, whereas 8 (47%) were inconsistent in their approach or failed to mention the exact mechanism for considering costs. Among the 138 specific recommendations in these guidance documents that included cost as part of the rationale, the most common form of recommendation (50 [36%]) encouraged the use of a specific medical service because of equal effectiveness and lower cost. Slightly more than half of the largest US physician societies explicitly consider costs in developing their clinical guidance documents; among these, approximately half use an explicit mechanism for integrating costs into the strength of recommendations. Many societies remain vague in their approach. Physician specialty societies should demonstrate greater transparency and rigor in their approach to cost consideration in documents meant to influence care decisions.

Life cycle cost analysis of aging aircraft airframe maintenance

NASA Astrophysics Data System (ADS)

Sperry, Kenneth Robert

Scope and method of study. The purpose of this study was to examine the relationship between an aircraft's age and its annual airframe maintenance costs. Common life cycle costing methodology has previously not recognized the existence of this cost growth potential, and has therefor not determined the magnitude nor significance of this cost element. This study analyzed twenty-five years of DOT Form 41-airframe maintenance cost data for the Boeing 727, 737, 747 and McDonnell Douglas DC9 and DC-10 aircraft. Statistical analysis included regression analysis, Pearson's r, and t-tests to test the null hypothesis. Findings and conclusion. Airframe maintenance cost growth was confirmed to be increasing after an aircraft's age exceeded its designed service objective of approximately twenty-years. Annual airframe maintenance cost growth increases were measured ranging from 3.5% annually for a DC-9, to approximately 9% annually for a DC-10 aircraft. Average measured coefficient of determination between age and airframe maintenance, exceeded .80, confirming a strong relationship between cost: and age. The statistical significance of the difference between airframe costs sampled in 1985, compared to airframe costs sampled in 1998 was confirmed by t-tests performed on each subject aircraft group. Future cost forecasts involving aging aircraft subjects must address cost growth due to aging when attempting to model an aircraft's economic service life.

Tunnel and Station Cost Methodology : Mined Tunnels

DOT National Transportation Integrated Search

1983-01-01

The main objective of this study was to develop a model for estimating the cost of subway station and tunnel construction. This report describes a cost estimating methodology for subway tunnels that can be used by planners, designers, owners, and gov...

Tunnel and Station Cost Methodology Volume II: Stations

DOT National Transportation Integrated Search

1981-01-01

The main objective of this study was to develop a model for estimating the cost of subway station and tunnel construction. This report describes a cost estimating methodology for subway tunnels that can be used by planners, designers, owners, and gov...

Costs of Addressing Heroin Addiction in Malaysia and 32 Comparable Countries Worldwide

PubMed Central

Ruger, Jennifer Prah; Chawarski, Marek; Mazlan, Mahmud; Luekens, Craig; Ng, Nora; Schottenfeld, Richard

2012-01-01

Objective Develop and apply new costing methodologies to estimate costs of opioid dependence treatment in countries worldwide. Data Sources/Study Setting Micro-costing methodology developed and data collected during randomized controlled trial (RCT) involving 126 patients (July 2003–May 2005) in Malaysia. Gross-costing methodology developed to estimate costs of treatment replication in 32 countries with data collected from publicly available sources. Study Design Fixed, variable, and societal cost components of Malaysian RCT micro-costed and analytical framework created and employed for gross-costing in 32 countries selected by three criteria relative to Malaysia: major heroin problem, geographic proximity, and comparable gross domestic product (GDP) per capita. Principal Findings Medication, and urine and blood testing accounted for the greatest percentage of total costs for both naltrexone (29–53 percent) and buprenorphine (33–72 percent) interventions. In 13 countries, buprenorphine treatment could be provided for under $2,000 per patient. For all countries except United Kingdom and Singapore, incremental costs per person were below $1,000 when comparing buprenorphine to naltrexone. An estimated 100 percent of opiate users in Cambodia and Lao People's Democratic Republic could be treated for $8 and $30 million, respectively. Conclusions Buprenorphine treatment can be provided at low cost in countries across the world. This study's new costing methodologies provide tools for health systems worldwide to determine the feasibility and cost of similar interventions. PMID:22091732

Costs of addressing heroin addiction in Malaysia and 32 comparable countries worldwide.

PubMed

Ruger, Jennifer Prah; Chawarski, Marek; Mazlan, Mahmud; Luekens, Craig; Ng, Nora; Schottenfeld, Richard

2012-04-01

Develop and apply new costing methodologies to estimate costs of opioid dependence treatment in countries worldwide. Micro-costing methodology developed and data collected during randomized controlled trial (RCT) involving 126 patients (July 2003-May 2005) in Malaysia. Gross-costing methodology developed to estimate costs of treatment replication in 32 countries with data collected from publicly available sources. Fixed, variable, and societal cost components of Malaysian RCT micro-costed and analytical framework created and employed for gross-costing in 32 countries selected by three criteria relative to Malaysia: major heroin problem, geographic proximity, and comparable gross domestic product (GDP) per capita. Medication, and urine and blood testing accounted for the greatest percentage of total costs for both naltrexone (29-53 percent) and buprenorphine (33-72 percent) interventions. In 13 countries, buprenorphine treatment could be provided for under $2,000 per patient. For all countries except United Kingdom and Singapore, incremental costs per person were below $1,000 when comparing buprenorphine to naltrexone. An estimated 100 percent of opiate users in Cambodia and Lao People's Democratic Republic could be treated for $8 and $30 million, respectively. Buprenorphine treatment can be provided at low cost in countries across the world. This study's new costing methodologies provide tools for health systems worldwide to determine the feasibility and cost of similar interventions. © Health Research and Educational Trust.

Macro-economic assessment of flood risk in Italy under current and future climate

NASA Astrophysics Data System (ADS)

Carrera, Lorenzo; Koks, Elco; Mysiak, Jaroslav; Aerts, Jeroen; Standardi, Gabriele

2014-05-01

This paper explores an integrated methodology for assessing direct and indirect costs of fluvial flooding to estimate current and future fluvial flood risk in Italy. Our methodology combines a Geographic Information System spatial approach, with a general economic equilibrium approach using a downscaled modified version of a Computable General Equilibrium model at NUTS2 scale. Given the level of uncertainty in the behavior of disaster-affected economies, the simulation considers a wide range of business recovery periods. We calculate expected annual losses for each NUTS2 region, and exceedence probability curves to determine probable maximum losses. Given a certain acceptable level of risk, we describe the conditions of flood protection and business recovery periods under which losses are contained within this limit. Because of the difference between direct costs, which are an overestimation of stock losses, and indirect costs, which represent the macro-economic effects, our results have different policy meanings. While the former is relevant for post-disaster recovery, the latter is more relevant for public policy issues, particularly for cost-benefit analysis and resilience assessment.

Cost analysis of a disaster facility at an apex tertiary care trauma center of India

PubMed Central

Singh, Sheetal; Gupta, Shakti; Daga, Anoop; Siddharth, Vijaydeep; Wundavalli, LaxmiTej

2016-01-01

Introduction: For the Commonwealth Games 2010, Jai Prakash Narayan Apex Trauma Centre (JPNATC) of India had been directed by the Director General Health Services and Ministry of Health and Family Welfare, Government of India, to set up a specialized unit for the definitive management of the injured/unwell athletes, officials, and related personnel coming for the Commonwealth Games in October 2010. The facility included a 20-bedded fully equipped ward, six ICU beds with ventilator capacity, one very very important person observation area, one perioperative management cubicle, and one fully modular and integrated operating room. Objective: The objective of this study was to calculate the cost of disaster facility at JPNATC, All India Institute of Medical Sciences, New Delhi. Methodology: Traditional (average or gross) costing methodology was used to arrive at the cost for the provisioning of these services by this facility. Results: The annual cost of providing services at disaster facility at JPNATC, New Delhi, was calculated to be INR 61,007,334.08 (US$ 983,989.258) while the per hour cost was calculated to be INR 7061.03 of the total cost toward the provisioning of services by disaster facility where 26% was the capital cost and 74% was the operating cost. Human resource caters to maximum chunk of the expenditures (47%). Conclusion: The results of this costing study will help in the future planning of resource allocation within the financial constraints (US$ 1 = INR 62 in the year 2013). PMID:27904258

Development of Cost Benefit Methodology for Scientific and Technical Information Communication and Application to Information Analysis Centers. Final Report.

ERIC Educational Resources Information Center

Mason, Robert M.; And Others

This document presents a research effort intended to improve the economic information available for formulating politics and making decisions related to Information Analysis Centers (IAC's) and IAC services. The project used a system of IAC information activities to analyze the functional aspects of IAC services, calculate the present value of net…

A Generalizable Methodology for Quantifying User Satisfaction

NASA Astrophysics Data System (ADS)

Huang, Te-Yuan; Chen, Kuan-Ta; Huang, Polly; Lei, Chin-Laung

Quantifying user satisfaction is essential, because the results can help service providers deliver better services. In this work, we propose a generalizable methodology, based on survival analysis, to quantify user satisfaction in terms of session times, i. e., the length of time users stay with an application. Unlike subjective human surveys, our methodology is based solely on passive measurement, which is more cost-efficient and better able to capture subconscious reactions. Furthermore, by using session times, rather than a specific performance indicator, such as the level of distortion of voice signals, the effects of other factors like loudness and sidetone, can also be captured by the developed models. Like survival analysis, our methodology is characterized by low complexity and a simple model-developing process. The feasibility of our methodology is demonstrated through case studies of ShenZhou Online, a commercial MMORPG in Taiwan, and the most prevalent VoIP application in the world, namely Skype. Through the model development process, we can also identify the most significant performance factors and their impacts on user satisfaction and discuss how they can be exploited to improve user experience and optimize resource allocation.

The effectiveness and cost-effectiveness of diversion and aftercare programmes for offenders using class A drugs: a systematic review and economic evaluation.

PubMed

Hayhurst, Karen P; Leitner, Maria; Davies, Linda; Flentje, Rachel; Millar, Tim; Jones, Andrew; King, Carlene; Donmall, Michael; Farrell, Michael; Fazel, Seena; Harris, Rochelle; Hickman, Matthew; Lennox, Charlotte; Mayet, Soraya; Senior, Jane; Shaw, Jennifer

2015-01-01

The societal costs of problematic class A drug use in England and Wales exceed £15B; drug-related crime accounts for almost 90% of costs. Diversion plus treatment and/or aftercare programmes may reduce drug-related crime and costs. To assess the effectiveness and cost-effectiveness of diversion and aftercare for class A drug-using offenders, compared with no diversion. Adult class A drug-using offenders diverted to treatment or an aftercare programme for their drug use. Programmes to identify and divert problematic drug users to treatment (voluntary, court mandated or monitored services) at any point within the criminal justice system (CJS). Aftercare follows diversion and treatment, excluding care following prison or non-diversionary drug treatment. Thirty-three electronic databases and government online resources were searched for studies published between January 1985 and January 2012, including MEDLINE, PsycINFO and ISI Web of Science. Bibliographies of identified studies were screened. The UK Drug Data Warehouse, the UK Drug Treatment Outcomes Research Study and published statistics and reports provided data for the economic evaluation. Included studies evaluated diversion in adult class A drug-using offenders, in contact with the CJS. The main outcomes were drug use and offending behaviour, and these were pooled using meta-analysis. The economic review included full economic evaluations for adult opiate and/or crack, or powder, cocaine users. An economic decision analytic model, estimated incremental costs per unit of outcome gained by diversion and aftercare, over a 12-month time horizon. The perspectives included the CJS, NHS, social care providers and offenders. Probabilistic sensitivity analysis and one-way sensitivity analysis explored variance in parameter estimates, longer time horizons and structural uncertainty. Sixteen studies met the effectiveness review inclusion criteria, characterised by poor methodological quality, with modest sample sizes, high attrition rates, retrospective data collection, limited follow-up, no random allocation and publication bias. Most study samples comprised US methamphetamine users. Limited meta-analysis was possible, indicating a potential small impact of diversion interventions on reducing drug use [odds ratio (OR) 1.68, 95% confidence interval (CI) 1.12 to 2.53 for reduced primary drug use, and OR 2.60, 95% CI 1.70 to 3.98 for reduced use of other drugs]. The cost-effectiveness review did not identify any relevant studies. The economic evaluation indicated high uncertainty because of variance in data estimates and limitations in the model design. The primary analysis was unclear whether or not diversion was cost-effective. The sensitivity analyses indicated some scenarios where diversion may be cost-effective. Nearly all participants (99.6%) in the effectiveness review were American (Californian) methamphetamine users, limiting transfer of conclusions to the UK. Data and methodological limitations mean it is unclear whether or not diversion is effective or cost-effective. High-quality evidence for the effectiveness and cost-effectiveness of diversion schemes is sparse and does not relate to the UK. Importantly this research identified a range of methodological limitations in existing evidence. These highlight the need for research to conceptualise, define and develop models of diversion programmes and identify a core outcome set. A programme of feasibility, pilot and definitive trials, combined with process evaluation and qualitative research is recommended to assess the effectiveness and cost-effectiveness of diversionary interventions in class A drug-using offenders. The National Institute for Health Research Health Technology Assessment programme.

An Analysis of the Maintenance Performance Measurement System for LAMPS MK III Helicopter Squadrons

DTIC Science & Technology

1993-12-01

effectiveness, efficiency, productivity, quality, budgetability, innovation and quality of work.life ), and determine the significance of AFM funds on... Balance .. Phase II - Unit Sustainment Manpower Cost Methodology, Management Consulting and Research, Falls Church, Virginia, 1981. McCutcheon, David A

Cost benefit analysis of space communications technology: Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Holland, L. D.; Sassone, P. G.; Gallagher, J. J.; Robinette, S. L.; Vogler, F. H.; Zimmer, R. P.

1976-01-01

The questions of (1) whether or not NASA should support the further development of space communications technology, and, if so, (2) which technology's support should be given the highest priority are addressed. Insofar as the issues deal principally with resource allocation, an economics perspective is adopted. The resultant cost benefit methodology utilizes the net present value concept in three distinct analysis stages to evaluate and rank those technologies which pass a qualification test based upon probable (private sector) market failure. User-preference and technology state-of-the-art surveys were conducted (in 1975) to form a data base for the technology evaluation. The program encompassed near-future technologies in space communications earth stations and satellites, including the noncommunication subsystems of the satellite (station keeping, electrical power system, etc.). Results of the research program include confirmation of the applicability of the methodology as well as a list of space communications technologies ranked according to the estimated net present value of their support (development) by NASA.

Technical and Economic Assessment of the Implementation of Measures for Reducing Energy Losses in Distribution Systems

NASA Astrophysics Data System (ADS)

Aguila, Alexander; Wilson, Jorge

2017-07-01

This paper develops a methodology to assess a group of measures of electrical improvements in distribution systems, starting from the complementation of technical and economic criteria. In order to solve the problem of energy losses in distribution systems, technical and economic analysis was performed based on a mathematical model to establish a direct relationship between the energy saved by way of minimized losses and the costs of implementing the proposed measures. This paper aims at analysing the feasibility of reducing energy losses in distribution systems, by changing existing network conductors by larger crosssection conductors and distribution voltage change at higher levels. The impact of this methodology provides a highly efficient mathematical tool for analysing the feasibility of implementing improvement projects based on their costs which is a very useful tool for the distribution companies that will serve as a starting point to the analysis for this type of projects in distribution systems.

Cost of Equity Estimation in Fuel and Energy Sector Companies Based on CAPM

NASA Astrophysics Data System (ADS)

Kozieł, Diana; Pawłowski, Stanisław; Kustra, Arkadiusz

2018-03-01

The article presents cost of equity estimation of capital groups from the fuel and energy sector, listed at the Warsaw Stock Exchange, based on the Capital Asset Pricing Model (CAPM). The objective of the article was to perform a valuation of equity with the application of CAPM, based on actual financial data and stock exchange data and to carry out a sensitivity analysis of such cost, depending on the financing structure of the entity. The objective of the article formulated in this manner has determined its' structure. It focuses on presentation of substantive analyses related to the core of equity and methods of estimating its' costs, with special attention given to the CAPM. In the practical section, estimation of cost was performed according to the CAPM methodology, based on the example of leading fuel and energy companies, such as Tauron GE and PGE. Simultaneously, sensitivity analysis of such cost was performed depending on the structure of financing the company's operation.

Audit of Trichomonas vaginalis test requesting by community referrers after a change from culture to molecular testing, including a cost analysis.

PubMed

Bissessor, Liselle; Wilson, Janet; McAuliffe, Gary; Upton, Arlo

2017-06-16

Trichomonas vaginalis (TV) prevalence varies among different communities and peoples. The availability of robust molecular platforms for the detection of TV has advanced diagnosis; however, molecular tests are more costly than phenotypic methodologies, and testing all urogenital samples is costly. We recently replaced culture methods with the Aptima Trichomonas vaginalis nucleic acid amplification test on specific request and as reflex testing by the laboratory, and have audited this change. Data were collected from August 2015 (microbroth culture and microscopy) and August 2016 (Aptima TV assay) including referrer, testing volumes, results and test cost estimates. In August 2015, 10,299 vaginal swabs, and in August 2016, 2,189 specimens (urogenital swabs and urines), were tested. The positivity rate went from 0.9% to 5.3%, and overall more TV infections were detected in 2016. The number needed to test and cost for one positive TV result respectively was 111 and $902.55 in 2015, and 19 and $368.92 in 2016. Request volumes and positivity rates differed among referrers. The methodology change was associated with higher overall detection of TV, and reductions in the numbers needed to test/cost for one TV diagnosis. Our audit suggests that there is room for improvement with TV test requesting in our community.

Methodological Considerations in Social Cost Studies of Addictive Substances: A Systematic Literature Review.

PubMed

Verhaeghe, Nick; Lievens, Delfine; Annemans, Lieven; Vander Laenen, Freya; Putman, Koen

2016-01-01

Alcohol, tobacco, illicit drugs, and psychoactive pharmaceuticals' use is associated with a higher likelihood of developing several diseases and injuries and, as a consequence, considerable health-care expenditures. There is yet a lack of consistent methodologies to estimate the economic impact of addictive substances to society. The aim was to assess the methodological approaches applied in social cost studies estimating the economic impact of alcohol, tobacco, illicit drugs, and psychoactive pharmaceuticals. A systematic literature review through the electronic databases, Medline (PubMed) and Web of Science, was performed. Studies in English published from 1997 examining the social costs of the addictive substances alcohol, tobacco, illicit drugs, and psychoactive pharmaceuticals were eligible for inclusion. Twelve social cost studies met the inclusion criteria. In all studies, the direct and indirect costs were measured, but the intangible costs were seldom taken into account. A wide variety in cost items included across studies was observed. Sensitivity analyses to address the uncertainty around certain cost estimates were conducted in eight studies considered in the review. Differences in cost items included in cost-of-illness studies limit the comparison across studies. It is clear that it is difficult to deal with all consequences of substance use in cost-of-illness studies. Future social cost studies should be based on sound methodological principles in order to result in more reliable cost estimates of the economic burden of substance use.

How to estimate the cost of point-of-care CD4 testing in program settings: an example using the Alere Pima Analyzer in South Africa.

PubMed

Larson, Bruce; Schnippel, Kathryn; Ndibongo, Buyiswa; Long, Lawrence; Fox, Matthew P; Rosen, Sydney

2012-01-01

Integrating POC CD4 testing technologies into HIV counseling and testing (HCT) programs may improve post-HIV testing linkage to care and treatment. As evaluations of these technologies in program settings continue, estimates of the costs of POC CD4 tests to the service provider will be needed and estimates have begun to be reported. Without a consistent and transparent methodology, estimates of the cost per CD4 test using POC technologies are likely to be difficult to compare and may lead to erroneous conclusions about costs and cost-effectiveness. This paper provides a step-by-step approach for estimating the cost per CD4 test from a provider's perspective. As an example, the approach is applied to one specific POC technology, the Pima Analyzer. The costing approach is illustrated with data from a mobile HCT program in Gauteng Province of South Africa. For this program, the cost per test in 2010 was estimated at $23.76 (material costs  = $8.70; labor cost per test  = $7.33; and equipment, insurance, and daily quality control  = $7.72). Labor and equipment costs can vary widely depending on how the program operates and the number of CD4 tests completed over time. Additional costs not included in the above analysis, for on-going training, supervision, and quality control, are likely to increase further the cost per test. The main contribution of this paper is to outline a methodology for estimating the costs of incorporating POC CD4 testing technologies into an HCT program. The details of the program setting matter significantly for the cost estimate, so that such details should be clearly documented to improve the consistency, transparency, and comparability of cost estimates.

Update on value-based medicine.

PubMed

Brown, Melissa M; Brown, Gary C

2013-05-01

To update concepts in Value-Based Medicine, especially in view of the Patient Protection and Affordable Care Act. The Patient Protection and Affordable Care Act assures that some variant of Value-Based Medicine cost-utility analysis will play a key role in the healthcare system. It identifies the highest quality care, thereby maximizing the most efficacious use of healthcare resources and empowering patients and physicians.Standardization is critical for the creation and acceptance of a Value-Based Medicine, cost-utility analysis, information system, since 27 million different input variants can go into a cost-utility analysis. Key among such standards is the use of patient preferences (utilities), as patients best understand the quality of life associated with their health states. The inclusion of societal costs, versus direct medical costs alone, demonstrates that medical interventions are more cost effective and, in many instances, provide a net financial return-on-investment to society referent to the direct medical costs expended. Value-Based Medicine provides a standardized methodology, integrating critical, patient, quality-of-life preferences, and societal costs, to allow the highest quality, most cost-effective care. Central to Value-Based Medicine is the concept that all patients deserve the interventions that provide the greatest patient value (improvement in quality of life and/or length of life).

Solar thermal technology development: Estimated market size and energy cost savings. Volume 2: Assumptions, methodology and results

NASA Astrophysics Data System (ADS)

Gates, W. R.

1983-02-01

Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. Three fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. Solar thermal technology research and development (R&D) is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), depending on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest. Analysis is also provided regarding two federal incentives currently in use: The Federal Business Energy Tax Credit and direct R&D funding.

Solar thermal technology development: Estimated market size and energy cost savings. Volume 2: Assumptions, methodology and results

NASA Technical Reports Server (NTRS)

Gates, W. R.

1983-01-01

Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. Three fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. Solar thermal technology research and development (R&D) is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), depending on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest. Analysis is also provided regarding two federal incentives currently in use: The Federal Business Energy Tax Credit and direct R&D funding.

Counting the costs of accreditation in acute care: an activity-based costing approach.

PubMed

Mumford, Virginia; Greenfield, David; Hogden, Anne; Forde, Kevin; Westbrook, Johanna; Braithwaite, Jeffrey

2015-09-08

To assess the costs of hospital accreditation in Australia. Mixed methods design incorporating: stakeholder analysis; survey design and implementation; activity-based costs analysis; and expert panel review. Acute care hospitals accredited by the Australian Council for Health Care Standards. Six acute public hospitals across four States. Accreditation costs varied from 0.03% to 0.60% of total hospital operating costs per year, averaged across the 4-year accreditation cycle. Relatively higher costs were associated with the surveys years and with smaller facilities. At a national level these costs translate to $A36.83 million, equivalent to 0.1% of acute public hospital recurrent expenditure in the 2012 fiscal year. This is the first time accreditation costs have been independently evaluated across a wide range of hospitals and highlights the additional cost burden for smaller facilities. A better understanding of the costs allows policymakers to assess alternative accreditation and other quality improvement strategies, and understand their impact across a range of facilities. This methodology can be adapted to assess international accreditation programmes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Analysis of the production and transaction costs of forest carbon offset projects in the USA.

PubMed

Galik, Christopher S; Cooley, David M; Baker, Justin S

2012-12-15

Forest carbon offset project implementation costs, comprised of both production and transaction costs, could present an important barrier to private landowner participation in carbon offset markets. These costs likewise represent a largely undocumented component of forest carbon offset potential. Using a custom spreadsheet model and accounting tool, this study examines the implementation costs of different forest offset project types operating in different forest types under different accounting and sampling methodologies. Sensitivity results are summarized concisely through response surface regression analysis to illustrate the relative effect of project-specific variables on total implementation costs. Results suggest that transaction costs may represent a relatively small percentage of total project implementation costs - generally less than 25% of the total. Results also show that carbon accounting methods, specifically the method used to establish project baseline, may be among the most important factors in driving implementation costs on a per-ton-of-carbon-sequestered basis, dramatically increasing variability in both transaction and production costs. This suggests that accounting could be a large driver in the financial viability of forest offset projects, with transaction costs likely being of largest concern to those projects at the margin. Copyright © 2012 Elsevier Ltd. All rights reserved.

The First NASA Advanced Composites Technology Conference, part 1

NASA Technical Reports Server (NTRS)

Davis, John G., Jr. (Compiler); Bohon, Herman L. (Compiler)

1991-01-01

Papers are presented from the conference. The ACT program is a multiyear research initiative to achieve a national goal of technology readiness before the end of the decade. Conference papers recorded results of research in the ACT program on new materials development and processing, innovative design concepts, analysis development and validation, cost effective manufacturing methodology, and cost tracking and prediction procedures. Papers presented on major applications programs approved by the Department of Defense are also included.

The Profitability of a Birthing Center a Cost Finding Analysis of a Not-for-Profit Hospital.

DTIC Science & Technology

1997-03-01

bed-days in each DRG. The supply, equipment and dietary cost pools were distributed using this methodology. Supplies and drugs made-up the largest...Large Freestanding Birth Center of Low-Income Women. Journal of Nurse Midwifery 39 (2) (March-April): 112-8. Duboff, Robert S. 1992. Marketing to...Spitzer, Matthew C. 1995. Birth Centers - Economy, Safety, and Empowerment. Journal of Nurse Midwifery 40 (4) (July-August): 371-5. Stone, Patricia W

[Cost-effectiveness analysis of renal replacement therapies: how should we design research on these interventions in Brazil?].

PubMed

Sancho, Leyla Gomes; Dain, Sulamis

2008-06-01

This study aims to contribute to the discussion on the possibility of applying health economics assessment, specifically the cost-effectiveness technique, to renal replacement therapies for end-stage renal failure. A review was conducted on the interventions and their alternative courses from the perspective of the various methodological proposals in the literature, considering the availability of data and information in Brazil to back this type of research.

Cost-of-illness studies of atrial fibrillation: methodological considerations.

PubMed

Becker, Christian

2014-10-01

Atrial fibrillation (AF) is the most common heart rhythm arrhythmia, which has considerable economic consequences. This study aims to identify the current cost-of-illness estimates of AF; a focus was put on describing the studies' methodology. A literature review was conducted. Twenty-eight cost-of-illness studies were identified. Cost-of-illness estimates exist for health insurance members, hospital and primary care populations. In addition, the cost of stroke in AF patients and the costs of post-operative AF were calculated. The methods used were heterogeneous, mostly studies calculated excess costs. The identified annual excess costs varied, even among studies from the USA (∼US$1900 to ∼US$19,000). While pointing toward considerable costs, the cost-of-illness studies' relevance could be improved by focusing on subpopulations and treatment mixes. As possible starting points for subsequent economic studies, the methodology of cost-of-illness studies should be taken into account using methods, allowing stakeholders to find suitable studies and validate estimates.

Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design

PubMed Central

Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

2015-01-01

The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms. PMID:25583870

Toward quantifying the effectiveness of water trading under uncertainty.

PubMed

Luo, B; Huang, G H; Zou, Y; Yin, Y Y

2007-04-01

This paper presents a methodology for quantifying the effectiveness of water-trading under uncertainty, by developing an optimization model based on the interval-parameter two-stage stochastic program (TSP) technique. In the study, the effectiveness of a water-trading program is measured by the water volume that can be released through trading from a statistical point of view. The methodology can also deal with recourse water allocation problems generated by randomness in water availability and, at the same time, tackle uncertainties expressed as intervals in the trading system. The developed methodology was tested with a hypothetical water-trading program in an agricultural system in the Swift Current Creek watershed, Canada. Study results indicate that the methodology can effectively measure the effectiveness of a trading program through estimating the water volume being released through trading in a long-term view. A sensitivity analysis was also conducted to analyze the effects of different trading costs on the trading program. It shows that the trading efforts would become ineffective when the trading costs are too high. The case study also demonstrates that the trading program is more effective in a dry season when total water availability is in shortage.

Life-Cycle Cost/Benefit Assessment of Expedite Departure Path (EDP)

NASA Technical Reports Server (NTRS)

Wang, Jianzhong Jay; Chang, Paul; Datta, Koushik

2005-01-01

This report presents a life-cycle cost/benefit assessment (LCCBA) of Expedite Departure Path (EDP), an air traffic control Decision Support Tool (DST) currently under development at NASA. This assessment is an update of a previous study performed by bd Systems, Inc. (bd) during FY01, with the following revisions: The life-cycle cost assessment methodology developed by bd for the previous study was refined and calibrated using Free Flight Phase 1 (FFP1) cost information for Traffic Management Advisor (TMA, or TMA-SC in the FAA's terminology). Adjustments were also made to the site selection and deployment scheduling methodology to include airspace complexity as a factor. This technique was also applied to the benefit extrapolation methodology to better estimate potential benefits for other years, and at other sites. This study employed a new benefit estimating methodology because bd s previous single year potential benefit assessment of EDP used unrealistic assumptions that resulted in optimistic estimates. This methodology uses an air traffic simulation approach to reasonably predict the impacts from the implementation of EDP. The results of the costs and benefits analyses were then integrated into a life-cycle cost/benefit assessment.

10 CFR Appendix B to Part 436 - Goal Setting Methodology

Code of Federal Regulations, 2013 CFR

2013-01-01

... investment program, (using where appropriate, the life cycle costing factors and methodology in subpart A of... subpart A, the dollars saved can be projected against the dollars invested. Life cycle costing methodology..., maintenance, and equipment acquisition; and phase-out schedule (of older equipment or plants which may be...

10 CFR Appendix B to Part 436 - Goal Setting Methodology

Code of Federal Regulations, 2012 CFR

2012-01-01

... investment program, (using where appropriate, the life cycle costing factors and methodology in subpart A of... subpart A, the dollars saved can be projected against the dollars invested. Life cycle costing methodology..., maintenance, and equipment acquisition; and phase-out schedule (of older equipment or plants which may be...

10 CFR Appendix B to Part 436 - Goal Setting Methodology

Code of Federal Regulations, 2011 CFR

2011-01-01

... investment program, (using where appropriate, the life cycle costing factors and methodology in subpart A of... Subpart A, the dollars saved can be projected against the dollars invested. Life cycle costing methodology..., maintenance, and equipment acquisition; and phase-out schedule (of older equipment or plants which may be...

10 CFR Appendix B to Part 436 - Goal Setting Methodology

Code of Federal Regulations, 2014 CFR

2014-01-01

... investment program, (using where appropriate, the life cycle costing factors and methodology in subpart A of... subpart A, the dollars saved can be projected against the dollars invested. Life cycle costing methodology..., maintenance, and equipment acquisition; and phase-out schedule (of older equipment or plants which may be...

Cost of illness studies on reproductive, maternal, newborn, and child health: a systematic literature review

PubMed Central

2013-01-01

Background The term “reproductive, maternal, newborn, and child health (RMNCH)” describes an integrated continuum of health states which is central to Millennium Development Goals 4 and 5. While the burden of mortality and morbidity associated with RMNCH is well known, knowledge is still limited about the economic burden of RMNCH. Concrete evidence of cost of illness (COI) of RMNCH may help policy makers in supporting investment in RMNCH. Methods A systematic literature search of COI studies was performed in electronic databases. The time frame for the analysis was January 1990 – April 2011. The databases checked were Medline (Pubmed), Embase and ECONbase, EconLit, the Cumulative Index to Nursing and Allied Health (CINAHL), the National Bureau of Economic Research, the Latin American and Caribbean Literature on Health Sciences Database (LILACS), and Popline. Furthermore, we searched working papers and reference lists of selected articles. Results All the studies investigated address particular complications and issues of RMNCH, e.g., preterm birth, non-exclusive breastfeeding, and sexually transmitted diseases (STDs), but not RMNCH as an entire continuum. Most of the studies were conducted in high income countries, with limited data on low and middle income countries. The burden of disease is very high even for single complications. For example, the disease burden related to non-exclusive breastfeeding was given as 14.39 billion international dollars (ID) (2012, purchasing power parity) per year in the USA. Methodological differences in study design, costing approach, perspective of analysis, and time frame make it difficult to compare different studies. Conclusion The continuum of RMNCH covers a large portion of the lifespan from birth through the reproductive age. From a methodological perspective, an ideal COI study would clearly describe the perspective of analysis and, hence, the cost items (direct or indirect), cost collection procedure, discounting, quality of data, time frame of analysis, related comorbidities, and robust sensitivity analysis for all the assumptions. Further research is needed to measure the economic impact of RMNCH, including identification of the most cost-effective policy and interventions for prevention, reduction, and elimination of the complications of RMNCH. PMID:24229450

Cost-effectiveness analysis of vaccinations and decision makings on vaccination programmes in Hong Kong: A systematic review.

PubMed

Wong, Carlos K H; Liao, Qiuyan; Guo, Vivian Y W; Xin, Yiqiao; Lam, Cindy L K

2017-05-31

To describe and systematically review the modelling and reporting of cost-effectiveness analysis of vaccination in Hong Kong, and to identify areas for quality enhancement in future cost-effectiveness analyses. We conducted a comprehensive and systematic review of cost-effectiveness studies related to vaccination and government immunisation programmes in Hong Kong published from 1990 to 2015, through database search of Pubmed, Web of Science, Embase, and OVID Medline. Methodological quality of selected studies was assessed using Consolidated Health Economic Evaluation Reporting Standards checklist (CHEERS). Decision making of vaccination was obtained from Scientific Committee on Vaccine Preventable Diseases (SCVPD) and Department of Health in Hong Kong. Nine eligible studies reporting twelve comparative cost-effectiveness comparisons of vaccination programme for influenza (n=2), pneumococcal disease (n=3), influenza plus pneumococcal disease (n=1), chickenpox (n=2), Haemophilus influenzae b (n=1), hepatitis A (n=1), cervical cancer (n=1) and rotavirus (n=1) were identified. Ten comparisons (83.3%) calculated the incremental cost-effectiveness ratio (ICER) of a vaccination strategy versus status quo as outcomes in terms of cost in USD per life-years, cost per quality-adjusted life-years, or cost per disability-adjusted life-years. Among those 10 comparisons in base-case scenario, 4 evaluated interventions were cost-saving relative to status quo while the ICER estimates in 3 of the 6 remaining comparisons were far below commonly accepted threshold and WHO willingness-to-pay threshold, suggestive of very cost-effective. Seven studies were of good quality based on the CHEERS checklist; one was of moderate quality; and one was of excellent quality. The common methodological problems were characterisation of heterogeneity and reporting of study parameters. There was a paucity of cost-effectiveness models evaluating vaccination targeted to the Hong Kong population. All evaluated vaccinations and immunisation interventions in Hong Kong, except for Haemophilus influenzae b, hepatitis A and HPV vaccinations, were considered either cost-saving or very cost-effective when compared to status quo. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Costing maternal health services in South Tanzania: a case study from Mtwara Urban District.

PubMed

von Both, Claudia; Jahn, Albrecht; Fleba, Steffen

2008-05-01

The following paper presents the methodology and results of a costing exercise of maternal health services in Tanzania. The main objective of this study was to determine the actual costs of antenatal and obstetric care in different health institutions in a district in Tanzania as a basis of more efficient resource allocation. A costing tool was developed that allows the calculation of costs of service units, such as deliveries and antenatal care, and separates these costs from the costs of other services. Time consumed by each activity was used as an allocation key. For that purpose, we recorded the personnel consumption with different time-study methodologies. This approach was tested and implemented in Mtwara Urban District, South Tanzania. The results were analyzed by a spreadsheet program. The paper presents average costs for different costing units of maternal care. Among other findings, we found that the cost of a normal vaginal delivery is US $12.30 in a dispensary and US $6.30 in the hospital--a result that needs explanation, as usually one would expect that hospitals are more cost-intensive than first-line facilities. However, dispensaries are grossly underutilized so that the costs per service unit are rather high. The cost for surgical delivery (only in hospitals) was found to be US $69.26 and the average cost per antenatal care consultation (only at dispensaries) was US $2.50. We conclude that improved planning of elective services is a prerequisite for more effective and efficient use of personnel resources. In addition, the definition of medically and economically sound standards, in particular staffing standards, is critical to make cost analysis an effective management tool to guide rational resource allocation.

Systematic review of the cost effectiveness of prophylactic treatments in the prevention of gastropathy in patients with rheumatoid arthritis or osteoarthritis taking non-steroidal anti-inflammatory drugs

PubMed Central

van Dieten, H. E M; Bos, I.; van Tulder, M. W; Lems, W.; Dijkmans, B.; Boers, M.

2000-01-01

A systematic review on the cost effectiveness of prophylactic treatments of non-steroidal anti-inflammatory drug (NSAID) induced gastropathy in patients with osteoarthritis or rheumatoid arthritis was conducted. Two reviewers conducted the literature search and the review. Both full and partial economic evaluations published in English, Dutch, or German were included. The criteria list published in the textbook of Drummond was used to determine the quality of the economic evaluations. The methodological quality of three randomised controlled trials (RCTs) in which the economic evaluations obtained probability estimates of NSAID induced gastropathy and adverse events was assessed by a list of internal validity criteria. The conclusions were based on a rating system consisting of four levels of evidence.
  Ten economic evaluations were included; three were based on RCTs. All evaluations studied misoprostol as prophylactic treatment: in one evaluation misoprostol was studied as a fixed component in a combination with diclofenac (Arthrotec). All economic evaluations comprised analytical studies containing a decision tree. The three trials were of high methodological quality. Nine economic evaluations were considered high quality and one economic evaluation was considered of low methodological quality. There is strong evidence (level "A") that the use of misoprostol for the prevention of NSAID induced gastropathy is cost effective, and limited evidence (level "C") that the use of Arthrotec is cost effective. Although the levels of evidence used in this review are arbitrary, it is believed that a qualitative analysis is useful: quantitative analyses in this field are hampered by the heterogeneity of economic evaluations. Existing criteria to evaluate the methodological quality of economic evaluations may need refinement for use in systematic reviews.

 PMID:11005773

Systematic review of the cost effectiveness of prophylactic treatments in the prevention of gastropathy in patients with rheumatoid arthritis or osteoarthritis taking non-steroidal anti-inflammatory drugs.

PubMed

van Dieten, H E; Korthals-de Bos, I B; van Tulder, M W; Lems, W F; Dijkmans, B A; Boers, M

2000-10-01

A systematic review on the cost effectiveness of prophylactic treatments of non-steroidal anti-inflammatory drug (NSAID) induced gastropathy in patients with osteoarthritis or rheumatoid arthritis was conducted. Two reviewers conducted the literature search and the review. Both full and partial economic evaluations published in English, Dutch, or German were included. The criteria list published in the textbook of Drummond was used to determine the quality of the economic evaluations. The methodological quality of three randomised controlled trials (RCTs) in which the economic evaluations obtained probability estimates of NSAID induced gastropathy and adverse events was assessed by a list of internal validity criteria. The conclusions were based on a rating system consisting of four levels of evidence. Ten economic evaluations were included; three were based on RCTs. All evaluations studied misoprostol as prophylactic treatment: in one evaluation misoprostol was studied as a fixed component in a combination with diclofenac (Arthrotec). All economic evaluations comprised analytical studies containing a decision tree. The three trials were of high methodological quality. Nine economic evaluations were considered high quality and one economic evaluation was considered of low methodological quality. There is strong evidence (level "A") that the use of misoprostol for the prevention of NSAID induced gastropathy is cost effective, and limited evidence (level "C") that the use of Arthrotec is cost effective. Although the levels of evidence used in this review are arbitrary, it is believed that a qualitative analysis is useful: quantitative analyses in this field are hampered by the heterogeneity of economic evaluations. Existing criteria to evaluate the methodological quality of economic evaluations may need refinement for use in systematic reviews.

Use of response surface methodology for development of new microwell-based spectrophotometric method for determination of atrovastatin calcium in tablets

PubMed Central

2012-01-01

Background Response surface methodology by Box–Behnken design employing the multivariate approach enables substantial improvement in the method development using fewer experiments, without wastage of large volumes of organic solvents, which leads to high analysis cost. This methodology has not been employed for development of a method for analysis of atorvastatin calcium (ATR-Ca). Results The present research study describes the use of in optimization and validation of a new microwell-based UV-Visible spectrophotometric method of for determination of ATR-Ca in its tablets. By the use of quadratic regression analysis, equations were developed to describe the behavior of the response as simultaneous functions of the selected independent variables. Accordingly, the optimum conditions were determined which included concentration of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), time of reaction and temperature. The absorbance of the colored-CT complex was measured at 460 nm by microwell-plate absorbance reader. The method was validated, in accordance with ICH guidelines for accuracy, precision, selectivity and linearity (r² = 0.9993) over the concentration range of 20–200 μg/ml. The assay was successfully applied to the analysis of ATR-Ca in its pharmaceutical dosage forms with good accuracy and precision. Conclusion The assay described herein has great practical value in the routine analysis of ATR-Ca in quality control laboratories, as it has high throughput property, consumes minimum volume of organic solvent thus it offers the reduction in the exposures of the analysts to the toxic effects of organic solvents, environmentally friendly "Green" approach) and reduction in the analysis cost by 50-fold. PMID:23146143

[Economic analysis of multinational clinical trials in oncology].

PubMed

Lejeune, Catherine; Lueza, Béranger; Bonastre, Julia

2018-02-01

In oncology, as in other fields of medicine, international multicentre clinical trials came into being so as to include a sufficient number of subjects to investigate a clinical situation. The existence of tight budgetary constraints and the desire to make the best use of the resources available have resulted in the development of economic evaluations associated with these trials, which, thanks to their level of evidence and their size, provide particularly relevant material. Nonetheless, economic evaluations alongside international clinical trials raise specific questions of methodology with regard to both the design and the analysis of the results. Indeed, the costs of goods and services consumed, the types and quantities of resources, and medical practices vary from one country to another and within an individual country. Economic data from the different countries involved must be available so as to study and to take into account this variability, and appropriate techniques for cost estimations and analysis must be implemented to aggregate the results from several countries. From a review of the literature, the aim of this work was to provide an overview of the specific methodological features of economic evaluations alongside international clinical trials: analysis of efficacy data from several countries, collection of resources and real costs, methods to establish the monetary value of resources, methods to aggregate results accounting for the trial effect. Copyright © 2017 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

Assessing value-for-money in maternal and newborn health

PubMed Central

Madaj, Barbara; Kumar, Shubha

2017-01-01

Responding to increasing demands to demonstrate value-for-money (VfM) for maternal and newborn health interventions, and in the absence of VfM analysis in peer-reviewed literature, this paper reviews VfM components and methods, critiques their applicability, strengths and weakness and proposes how VfM assessments can be improved. VfM comprises four components: economy, efficiency, effectiveness and cost-effectiveness. Both ‘economy’ and ‘efficiency’ can be assessed with detailed cost analysis utilising costs obtained from programme accounting data or generic cost databases. Before-and-after studies, case–control studies or randomised controlled trials can be used to assess ‘effectiveness’. To assess ‘cost-effectiveness’, cost-effectiveness analysis (CEA), cost-utility analysis (CUA), cost-benefit analysis (CBA) or social return on investment (SROI) analysis are applicable. Generally, costs can be obtained from programme accounting data or existing generic cost databases. As such ‘economy’ and ‘efficiency’ are relatively easy to assess. However, ‘effectiveness’ and ‘cost-effectiveness’ which require establishment of the counterfactual are more difficult to ascertain. Either a combination of CEA or CUA with tools for assessing other VfM components, or the independent use of CBA or SROI are alternative approaches proposed to strengthen VfM assessments. Cross-cutting themes such as equity, sustainability, scalability and cultural acceptability should also be assessed, as they provide critical contextual information for interpreting VfM assessments. To select an assessment approach, consideration should be given to the purpose, data availability, stakeholders requiring the findings and perspectives of programme beneficiaries. Implementers and researchers should work together to improve the quality of assessments. Standardisation around definitions, methodology and effectiveness measures to be assessed would help. PMID:29081998

Assessing value-for-money in maternal and newborn health.

PubMed

Banke-Thomas, Aduragbemi; Madaj, Barbara; Kumar, Shubha; Ameh, Charles; van den Broek, Nynke

2017-01-01

Responding to increasing demands to demonstrate value-for-money (VfM) for maternal and newborn health interventions, and in the absence of VfM analysis in peer-reviewed literature, this paper reviews VfM components and methods, critiques their applicability, strengths and weakness and proposes how VfM assessments can be improved. VfM comprises four components: economy, efficiency, effectiveness and cost-effectiveness. Both 'economy' and 'efficiency' can be assessed with detailed cost analysis utilising costs obtained from programme accounting data or generic cost databases. Before-and-after studies, case-control studies or randomised controlled trials can be used to assess 'effectiveness'. To assess 'cost-effectiveness', cost-effectiveness analysis (CEA), cost-utility analysis (CUA), cost-benefit analysis (CBA) or social return on investment (SROI) analysis are applicable. Generally, costs can be obtained from programme accounting data or existing generic cost databases. As such 'economy' and 'efficiency' are relatively easy to assess. However, 'effectiveness' and 'cost-effectiveness' which require establishment of the counterfactual are more difficult to ascertain. Either a combination of CEA or CUA with tools for assessing other VfM components, or the independent use of CBA or SROI are alternative approaches proposed to strengthen VfM assessments. Cross-cutting themes such as equity, sustainability, scalability and cultural acceptability should also be assessed, as they provide critical contextual information for interpreting VfM assessments. To select an assessment approach, consideration should be given to the purpose, data availability, stakeholders requiring the findings and perspectives of programme beneficiaries. Implementers and researchers should work together to improve the quality of assessments. Standardisation around definitions, methodology and effectiveness measures to be assessed would help.

An analysis of cost overruns on defense acquisition contracts

NASA Technical Reports Server (NTRS)

Christensen, David S.

1994-01-01

This article examines the history of cost overruns reported on 64 completed defense contracts. Its purpose is to formally test the observation of the Under Secretary. Results confirm the observation at the 95 percent level of confidence, and were generally insensitive to the contract type (price, cost), the contract phase (development, production), the type of weapon system (air, ground, sea), and the armed forces service (Air Force, Army, Navy) that managed the contract. After a review of terminology, concepts, and related research for those unfamiliar with the area, the methodology, results, and managerial implications are described.

A Methodology for Project Selection Using Economic Analysis and the Analytic Hierarchy Process

DTIC Science & Technology

1992-09-01

5 L 0.278 G 0.065 Figure 7. Lower Levels for Cost Criterion 58 0 I I i I I 0 BEN’ S #1 0 iL 0. 353 WEIGHT 100% USE DEFF&SAFE MOVE NEW 0 L .333 3 L...and George Foster. Cost Accounting : a Managerial Emphasis (Seventh Edition). Englewood Cliffs NJ: Prentice Hall, 1991. 22. Kankey, Roland D...have cost in terms of manpower and/or dollars if it had been accomplished under contract or if it had been done in-house. Man Years S 4. Often it is not

Value Frameworks in Oncology: Comparative Analysis and Implications to the Pharmaceutical Industry.

PubMed

Slomiany, Mark; Madhavan, Priya; Kuehn, Michael; Richardson, Sasha

2017-07-01

As the cost of oncology care continues to rise, composite value models that variably capture the diverse concerns of patients, physicians, payers, policymakers, and the pharmaceutical industry have begun to take shape. To review the capabilities and limitations of 5 of the most notable value frameworks in oncology that have emerged in recent years and to compare their relative value and application among the intended stakeholders. We compared the methodology of the American Society of Clinical Oncology (ASCO) Value Framework (version 2.0), the National Comprehensive Cancer Network Evidence Blocks, Memorial Sloan Kettering Cancer Center DrugAbacus, the Institute for Clinical and Economic Review Value Assessment Framework, and the European Society for Medical Oncology Magnitude of Clinical Benefit Scale, using a side-by-side comparative approach in terms of the input, scoring methodology, and output of each framework. In addition, we gleaned stakeholder insights about these frameworks and their potential real-world applications through dialogues with physicians and payers, as well as through secondary research and an aggregate analysis of previously published survey results. The analysis identified several framework-specific themes in their respective focus on clinical trial elements, breadth of evidence, evidence weighting, scoring methodology, and value to stakeholders. Our dialogues with physicians and our aggregate analysis of previous surveys revealed a varying level of awareness of, and use of, each of the value frameworks in clinical practice. For example, although the ASCO Value Framework appears nascent in clinical practice, physicians believe that the frameworks will be more useful in practice in the future as they become more established and as their outputs are more widely accepted. Along with patients and payers, who bear the burden of treatment costs, physicians and policymakers have waded into the discussion of defining value in oncology care, as well as pharmaceutical companies that seek to understand the impact of these value frameworks on each stakeholder, as they model the value and financial threshold of innovative, high-cost drugs.

Cost-Effectiveness Analysis of Morcellation Hysterectomy for Myomas.

PubMed

Bortoletto, Pietro; Einerson, Brett D; Miller, Emily S; Milad, Magdy P

2015-01-01

To estimate the cost-effectiveness of eliminating morcellation in the surgical treatment of leiomyomas from a societal perspective. Cost-effectiveness analysis. Not applicable. A theoretical cohort of women undergoing hysterectomy for myoma disease large enough to require morcellation. None. None. A decision analysis model was constructed using probabilities, costs, and utility data from published sources. A cost-effectiveness analysis analyzing both quality-adjusted life years (QALYs) and cases of disseminated cancer was performed to determine the incremental cost-effectiveness ratio (ICER) of eliminating morcellation as a tool in the surgical treatment of leiomyomas. Costs and utilities were discounted using standard methodology. The base case included health care system costs and costs incurred by the patient for surgery-related disability. One-way sensitivity analyses were performed to assess the effect of various assumptions. The cost to prevent 1 case of disseminated cancer was $10 540 832. A strategy of nonmorcellation hysterectomy via laparotomy costed more ($30 359.92 vs $20 853.15) and yielded more QALYs (21.284 vs 21.280) relative to morcellation hysterectomy. The ICER for nonmorcellation hysterectomy compared with morcellation hysterectomy was $2 184 172 per QALY. Health care costs (prolonged hospitalizations) and costs to patients of prolonged time away from work were the primary drivers of cost differential between the 2 strategies. Even when the incidence of occult sarcoma in leiomyoma surgery was ranged to twice that reported in the literature (.98%), the ICER for nonmorcellation hysterectomy was $644 393.30. Eliminating morcellation hysterectomy as a treatment for myomas is not cost-effective under a wide variety of probability and cost assumptions. Performing laparotomy for all patients who might otherwise be candidates for morcellation hysterectomy is a costly policy from a societal perspective. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

A new methodology for modeling of direct landslide costs for transportation infrastructures

NASA Astrophysics Data System (ADS)

Klose, Martin; Terhorst, Birgit

2014-05-01

The world's transportation infrastructure is at risk of landslides in many areas across the globe. A safe and affordable operation of traffic routes are the two main criteria for transportation planning in landslide-prone areas. The right balancing of these often conflicting priorities requires, amongst others, profound knowledge of the direct costs of landslide damage. These costs include capital investments for landslide repair and mitigation as well as operational expenditures for first response and maintenance works. This contribution presents a new methodology for ex post assessment of direct landslide costs for transportation infrastructures. The methodology includes tools to compile, model, and extrapolate landslide losses on different spatial scales over time. A landslide susceptibility model enables regional cost extrapolation by means of a cost figure obtained from local cost compilation for representative case study areas. On local level, cost survey is closely linked with cost modeling, a toolset for cost estimation based on landslide databases. Cost modeling uses Landslide Disaster Management Process Models (LDMMs) and cost modules to simulate and monetize cost factors for certain types of landslide damage. The landslide susceptibility model provides a regional exposure index and updates the cost figure to a cost index which describes the costs per km of traffic route at risk of landslides. Both indexes enable the regionalization of local landslide losses. The methodology is applied and tested in a cost assessment for highways in the Lower Saxon Uplands, NW Germany, in the period 1980 to 2010. The basis of this research is a regional subset of a landslide database for the Federal Republic of Germany. In the 7,000 km² large Lower Saxon Uplands, 77 km of highway are located in potential landslide hazard area. Annual average costs of 52k per km of highway at risk of landslides are identified as cost index for a local case study area in this region. The cost extrapolation for the Lower Saxon Uplands results in annual average costs for highways of 4.02mn. This test application as well as a validation of selected modeling tools verifies the functionality of this methodology.

Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

NASA Astrophysics Data System (ADS)

Sirirojvisuth, Apinut

In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this concept, the additional manufacturing knowledge can be used to identify a more accurate lifecycle cost and facilitate higher fidelity tradeoffs during conceptual and preliminary design. Advanced Composite Cost Estimating Model (ACCEM) is employed as a process-based cost component to replace the original TCM result of the composite part production cost. The reason for the replacement is that TCM estimates production costs from part weights as a result of subtractive manufacturing of metallic origin such as casting, forging, and machining processes. A complexity factor can sometimes be adjusted to reflect different types of metal and machine settings. The TCM assumption, however, gives erroneous results when applied to additive processes like those of composite manufacturing. Another innovative aspect of this research is the introduction of a work measurement technique called Maynard Operation Sequence Technique (MOST) to be used, similarly to Activity-Based Costing (ABC) approach, to estimate manufacturing time of a part by virtue of breaking down the operations occurred during its production. ABC allows a realistic determination of cost incurred in each activity, as opposed to using a traditional method of time estimation by analogy or using response surface equations from historical process data. The MOST concept provides a tailored study of an individual process typically required for a new, innovative design. Nevertheless, the MOST idea has some challenges, one of which is its requirement to build a new process from ground up. The process development requires a Subject Matter Expertise (SME) in manufacturing method of the particular design. The SME must have also a comprehensive understanding of the MOST system so that the correct parameters are chosen. In practice, these knowledge requirements may demand people from outside of the design discipline and a priori training of MOST. To relieve the constraint, this study includes an entirely new sub-system architecture that comprises 1) a knowledge-based system to provide the required knowledge during the process selection; and 2) a new user-interface to guide the parameter selection when building the process using MOST. Also included in this study is the demonstration of how the HLCET and its constituents can be integrated with a Georgia Tech' Integrated Product and Process Development (IPPD) methodology. The applicability of this work will be shown through a complex aerospace design example to gain insights into how manufacturing knowledge helps make better design decisions during the early stages. The setup process is explained with an example of its utility demonstrated in a hypothetical fighter aircraft wing redesign. The evaluation of the system effectiveness against existing methodologies is illustrated to conclude the thesis.

The cost of post-abortion care in developing countries: a comparative analysis of four studies

PubMed Central

Vlassoff, Michael; Singh, Susheela; Onda, Tsuyoshi

2016-01-01

Over the last five years, comprehensive national surveys of the cost of post-abortion care (PAC) to national health systems have been undertaken in Ethiopia, Uganda, Rwanda and Colombia using a specially developed costing methodology—the Post-abortion Care Costing Methodology (PACCM). The objective of this study is to expand the research findings of these four studies, making use of their extensive datasets. These studies offer the most complete and consistent estimates of the cost of PAC to date, and comparing their findings not only provides generalizable implications for health policies and programs, but also allows an assessment of the PACCM methodology. We find that the labor cost component varies widely: in Ethiopia and Colombia doctors spend about 30–60% more time with PAC patients than do nurses; in Uganda and Rwanda an opposite pattern is found. Labor costs range from I$42.80 in Uganda to I$301.30 in Colombia. The cost of drugs and supplies does not vary greatly, ranging from I$79 in Colombia to I$115 in Rwanda. Capital and overhead costs are substantial amounting to 52–68% of total PAC costs. Total costs per PAC case vary from I$334 in Rwanda to I$972 in Colombia. The financial burden of PAC is considerable: the expense of treating each PAC case is equivalent to around 35% of annual per capita income in Uganda, 29% in Rwanda and 11% in Colombia. Providing modern methods of contraception to women with an unmet need would cost just a fraction of the average expenditure on PAC: one year of modern contraceptive services and supplies cost only 3–12% of the average cost of treating a PAC patient. PMID:27045001

Evaluation of radiological dispersion/consequence codes supporting DOE nuclear facility SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kula, K.R.; Paik, I.K.; Chung, D.Y.

1996-12-31

Since the early 1990s, the authorization basis documentation of many U.S. Department of Energy (DOE) nuclear facilities has been upgraded to comply with DOE orders and standards. In this process, many safety analyses have been revised. Unfortunately, there has been nonuniform application of software, and the most appropriate computer and engineering methodologies often are not applied. A DOE Accident Phenomenology and Consequence (APAC) Methodology Evaluation Program was originated at the request of DOE Defense Programs to evaluate the safety analysis methodologies used in nuclear facility authorization basis documentation and to define future cost-effective support and development initiatives. Six areas, includingmore » source term development (fire, spills, and explosion analysis), in-facility transport, and dispersion/ consequence analysis (chemical and radiological) are contained in the APAC program. The evaluation process, codes considered, key results, and recommendations for future model and software development of the Radiological Dispersion/Consequence Working Group are summarized in this paper.« less

Error and Uncertainty Analysis for Ecological Modeling and Simulation

DTIC Science & Technology

2001-12-01

management (LRAM) accounting for environmental, training, and economic factors. In the ELVS methodology, soil erosion status is used as a quantitative...Monte-Carlo approach. The optimization is realized through economic functions or on decision constraints, such as, unit sample cost, number of samples... nitrate flux to the Gulf of Mexico. Nature (Brief Communication) 414: 166-167. (Uncertainty analysis done with SERDP software) Gertner, G., G

Cost-effectiveness of peer role play and standardized patients in undergraduate communication training.

PubMed

Bosse, Hans Martin; Nickel, Martin; Huwendiek, Sören; Schultz, Jobst Hendrik; Nikendei, Christoph

2015-10-24

The few studies directly comparing the methodological approach of peer role play (RP) and standardized patients (SP) for the delivery of communication skills all suggest that both methods are effective. In this study we calculated the costs of both methods (given comparable outcomes) and are the first to generate a differential cost-effectiveness analysis of both methods. Medical students in their prefinal year were randomly assigned to one of two groups receiving communication training in Pediatrics either with RP (N = 34) or 19 individually trained SP (N = 35). In an OSCE with standardized patients using the Calgary-Cambridge Referenced Observation Guide both groups achieved comparable high scores (results published). In this study, corresponding costs were assessed as man-hours resulting from hours of work of SP and tutors. A cost-effectiveness analysis was performed. Cost-effectiveness analysis revealed a major advantage for RP as compared to SP (112 vs. 172 man hours; cost effectiveness ratio .74 vs. .45) at comparable performance levels after training with both methods. While both peer role play and training with standardized patients have their value in medical curricula, RP has a major advantage in terms of cost-effectiveness. This could be taken into account in future decisions.

A Methodological Review of US Budget-Impact Models for New Drugs.

PubMed

Mauskopf, Josephine; Earnshaw, Stephanie

2016-11-01

A budget-impact analysis is required by many jurisdictions when adding a new drug to the formulary. However, previous reviews have indicated that adherence to methodological guidelines is variable. In this methodological review, we assess the extent to which US budget-impact analyses for new drugs use recommended practices. We describe recommended practice for seven key elements in the design of a budget-impact analysis. Targeted literature searches for US studies reporting estimates of the budget impact of a new drug were performed and we prepared a summary of how each study addressed the seven key elements. The primary finding from this review is that recommended practice is not followed in many budget-impact analyses. For example, we found that growth in the treated population size and/or changes in disease-related costs expected during the model time horizon for more effective treatments was not included in several analyses for chronic conditions. In addition, all drug-related costs were not captured in the majority of the models. Finally, for most studies, one-way sensitivity and scenario analyses were very limited, and the ranges used in one-way sensitivity analyses were frequently arbitrary percentages rather than being data driven. The conclusions from our review are that changes in population size, disease severity mix, and/or disease-related costs should be properly accounted for to avoid over- or underestimating the budget impact. Since each budget holder might have different perspectives and different values for many of the input parameters, it is also critical for published budget-impact analyses to include extensive sensitivity and scenario analyses based on realistic input values.

Does convenience matter in health care delivery? A systematic review of convenience-based aspects of process utility.

PubMed

Higgins, A; Barnett, J; Meads, C; Singh, J; Longworth, L

2014-12-01

To systematically review the existing literature on the value associated with convenience in health care delivery, independent of health outcomes, and to try to estimate the likely magnitude of any value found. A systematic search was conducted for previously published studies that reported preferences for convenience-related aspects of health care delivery in a manner that was consistent with either cost-utility analysis or cost-benefit analysis. Data were analyzed in terms of the methodologies used, the aspects of convenience considered, and the values reported. Literature searches generated 4715 records. Following a review of abstracts or full-text articles, 27 were selected for inclusion. Twenty-six studies reported some evidence of convenience-related process utility, in the form of either a positive utility or a positive willingness to pay. The aspects of convenience valued most often were mode of administration (n = 11) and location of treatment (n = 6). The most common valuation methodology was a discrete-choice experiment containing a cost component (n = 15). A preference for convenience-related process utility exists, independent of health outcomes. Given the diverse methodologies used to calculate it, and the range of aspects being valued, however, it is difficult to assess how large such a preference might be, or how it may be effectively incorporated into an economic evaluation. Increased consistency in reporting these preferences is required to assess these issues more accurately. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Use of Model-Based Design Methods for Enhancing Resiliency Analysis of Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Knox, Lenora A.

The most common traditional non-functional requirement analysis is reliability. With systems becoming more complex, networked, and adaptive to environmental uncertainties, system resiliency has recently become the non-functional requirement analysis of choice. Analysis of system resiliency has challenges; which include, defining resilience for domain areas, identifying resilience metrics, determining resilience modeling strategies, and understanding how to best integrate the concepts of risk and reliability into resiliency. Formal methods that integrate all of these concepts do not currently exist in specific domain areas. Leveraging RAMSoS, a model-based reliability analysis methodology for Systems of Systems (SoS), we propose an extension that accounts for resiliency analysis through evaluation of mission performance, risk, and cost using multi-criteria decision-making (MCDM) modeling and design trade study variability modeling evaluation techniques. This proposed methodology, coined RAMSoS-RESIL, is applied to a case study in the multi-agent unmanned aerial vehicle (UAV) domain to investigate the potential benefits of a mission architecture where functionality to complete a mission is disseminated across multiple UAVs (distributed) opposed to being contained in a single UAV (monolithic). The case study based research demonstrates proof of concept for the proposed model-based technique and provides sufficient preliminary evidence to conclude which architectural design (distributed vs. monolithic) is most resilient based on insight into mission resilience performance, risk, and cost in addition to the traditional analysis of reliability.

Strengthening Cost-Effectiveness Analysis for Public Health Policy.

PubMed

Russell, Louise B; Sinha, Anushua

2016-05-01

Although the U.S. spends more on medical care than any country in the world, Americans live shorter lives than the citizens of other high-income countries. Many important opportunities to improve this record lie outside the health sector and involve improving the conditions in which Americans live and work: safe design and maintenance of roads, bridges, train tracks, and airports; control of environmental pollutants; occupational safety; healthy buildings; a safe and healthy food supply; safe manufacture of consumer products; a healthy social environment; and others. Faced with the overwhelming array of possibilities, U.S. decision makers need help identifying those that can contribute the most to health. Cost-effectiveness analysis is designed to serve that purpose, but has mainly been used to assess interventions within the health sector. This paper briefly reviews the objective of cost-effectiveness analysis and its methodologic evolution and discusses the issues that arise when it is used to evaluate interventions that fall outside the health sector under three headings: structuring the analysis, quantifying/measuring benefits and costs, and valuing benefits and costs. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

42 CFR 493.649 - Methodology for determining fee amount.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fringe benefit costs to support the required number of State inspectors, management and direct support... full time equivalent employee. Included in this cost are salary and fringe benefit costs, necessary... 42 Public Health 5 2010-10-01 2010-10-01 false Methodology for determining fee amount. 493.649...

Affordable Design: A Methodolgy to Implement Process-Based Manufacturing Cost into the Traditional Performance-Focused Multidisciplinary Design Optimization

NASA Technical Reports Server (NTRS)

Bao, Han P.; Samareh, J. A.

2000-01-01

The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.

Techno-economic and Monte Carlo probabilistic analysis of microalgae biofuel production system.

PubMed

Batan, Liaw Y; Graff, Gregory D; Bradley, Thomas H

2016-11-01

This study focuses on the characterization of the technical and economic feasibility of an enclosed photobioreactor microalgae system with annual production of 37.85 million liters (10 million gallons) of biofuel. The analysis characterizes and breaks down the capital investment and operating costs and the production cost of unit of algal diesel. The economic modelling shows total cost of production of algal raw oil and diesel of $3.46 and $3.69 per liter, respectively. Additionally, the effects of co-products' credit and their impact in the economic performance of algal-to-biofuel system are discussed. The Monte Carlo methodology is used to address price and cost projections and to simulate scenarios with probabilities of financial performance and profits of the analyzed model. Different markets for allocation of co-products have shown significant shifts for economic viability of algal biofuel system. Copyright © 2016 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wixson, J. R.

Root cause analysis (RCA) is an important methodology that can be integrated with the VE Job Plan to generate superior results from the VE Methodology. The point at which RCA is most appropriate is after the function analysis and FAST Model have been built and functions for improvement have been chosen. These functions are then subjected to a simple, but, rigorous RCA to get to the root cause of their deficiencies, whether it is high cost/poor value, poor quality, or poor reliability. Once the most probable causes for these problems have been arrived at, better solutions for improvement can bemore » developed in the creativity phase because the team better understands the problems associated with these functions.« less

Fast and Cost-Effective Biochemical Spectrophotometric Analysis of Solution of Insect "Blood" and Body Surface Elution.

PubMed

Łoś, Aleksandra; Strachecka, Aneta

2018-05-09

Using insect hemolymph ("blood") and insect body surface elutions, researchers can perform rapid and cheap biochemical analyses to determine the insect's immunology status. The authors of this publication describe a detailed methodology for a quick marking of the concentration of total proteins and evaluation of the proteolytic system activity (acid, neutral, and alkaline proteases and protease inhibitors), as well as a methodology for quick "liver" tests in insects: alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and urea and glucose concentration analyses. The meaning and examples of an interpretation of the results of the presented methodology for biochemical parameter determination are described for the example of honey bees.

Training Extension Course Cost and Training Effectiveness Analysis Methodology

DTIC Science & Technology

1986-01-01

to briefly summarize the economic theories on which it is based, which are the theory of consumer behavior and the theory of economic welfare. The...theory of consumer behavior attempts to explain the behavior of rational individuals in the context of a market. Individuals are faced with a large

School Uniforms: A Qualitative Analysis of Aims and Accomplishments at Two Christian Schools

ERIC Educational Resources Information Center

Firmin, Michael; Smith, Suzanne; Perry, Lynsey

2006-01-01

Employing rigorous qualitative research methodology, we studied the implementation of two schools' uniform policies. Their primary intents were to eliminate competition, teach young people to dress appropriately, decrease nonacademic distractions, and lower the parental clothing costs. The young people differed with adults regarding whether or not…

The costs of nurse turnover, part 2: application of the Nursing Turnover Cost Calculation Methodology.

PubMed

Jones, Cheryl Bland

2005-01-01

This is the second article in a 2-part series focusing on nurse turnover and its costs. Part 1 (December 2004) described nurse turnover costs within the context of human capital theory, and using human resource accounting methods, presented the updated Nursing Turnover Cost Calculation Methodology. Part 2 presents an application of this method in an acute care setting and the estimated costs of nurse turnover that were derived. Administrators and researchers can use these methods and cost information to build a business case for nurse retention.

Modelling the effects and economics of managed realignment on the cycling and storage of nutrients, carbon and sediments in the Blackwater estuary UK

NASA Astrophysics Data System (ADS)

Shepherd, D.; Burgess, D.; Jickells, T.; Andrews, J.; Cave, R.; Turner, R. K.; Aldridge, J.; Parker, E. R.; Young, E.

2007-07-01

A hydrodynamic model is developed for the Blackwater estuary (UK) and used to estimate nitrate removal by denitrification. Using the model, sediment analysis and estimates of sedimentation rates, we estimate changes in estuarine denitrification and intertidal carbon and nutrient storage and associated value of habitat created under a scenario of extensive managed realignment. We then use this information, together with engineering and land costs, to conduct a cost benefit analysis of the managed realignment. This demonstrates that over a 50-100 year timescale the value of the habitat created and carbon buried is sufficient to make the large scale managed realignment cost effective. The analysis reveals that carbon and nutrient storage plus habitat creation represent major and quantifiable benefits of realignment. The methodology described here can be readily transferred to other coastal systems.

The social cost of rheumatoid arthritis in Italy: the results of an estimation exercise.

PubMed

Turchetti, G; Bellelli, S; Mosca, M

2014-03-14

The objective of this study is to estimate the mean annual social cost per adult person and the total social cost of rheumatoid arthritis (RA) in Italy. A literature review was performed by searching primary economic studies on adults in order to collect cost data of RA in Italy in the last decade. The review results were merged with data of institutional sources for estimating - following the methodological steps of the cost of illness analysis - the social cost of RA in Italy. The mean annual social cost of RA was € 13,595 per adult patient in Italy. Affecting 259,795 persons, RA determines a social cost of € 3.5 billions in Italy. Non-medical direct cost and indirect cost represent the main cost items (48% and 31%) of the total social cost of RA in Italy. Based on these results, it appears evident that the assessment of the economic burden of RA solely based on direct medical costs evaluation gives a limited view of the phenomenon.

Economic evaluation of mental health interventions: an introduction to cost-utility analysis.

PubMed

Luyten, Jeroen; Naci, Huseyin; Knapp, Martin

2016-05-01

Finite resources need to be allocated over an ever-increasing range of competing health policies and interventions. Economic evaluation has been developed as a methodology to inform decision makers on the efficiency of particular resource allocations. In this paper we summarize cost-utility analysis, one of the most widely-used forms of economic evaluation in healthcare. We discuss its main elements, interpretation, limitations and relevance to the domain of mental health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Cost Analysis of Operation Theatre Services at an Apex Tertiary Care Trauma Centre of India.

PubMed

Siddharth, Vijaydeep; Kumar, Subodh; Vij, Aarti; Gupta, Shakti Kumar

2015-12-01

Operating room services are one of the major cost and revenue-generating centres of a hospital. The cost associated with the provisioning of operating department services depends on the resources consumed and the unit costs of those resources. The objective of this study was to calculate the cost of operation theatre services at Jai Prakash Narayan Apex Trauma Centre, AIIMS, New Delhi. The study was carried out at the operation theatre department of Jai Prakash Narayan Apex Trauma Centre (JPNATC), AIIMS from April 2010 to March 2011 after obtaining approval from concerned authorities. This study was observational and descriptive in nature. Traditional (average or gross) costing methodology was used to arrive at the cost for the provisioning of operation theatre (OT) services. Cost was calculated under two heads; as capital and operating cost. Annualised cost of capital assets was calculated according to the methodology prescribed by the World Health Organization and operating costs were taken on actual basis; thereafter, per day cost of OT services was obtained. The average number of surgeries performed in the trauma centre per day is 13. The annual cost of providing operating room services at JPNATC, New Delhi was calculated to be 197,298,704 Indian rupees (INR) (US$ 3,653,679), while the per hour cost was calculated to be INR 22,626.92 (US$ 419). Majority of the expenditures were for human resource (33.63 %) followed by OT capital cost (31.90 %), consumables (29.97 %), engineering maintenance cost (2.55 %), support services operating cost (1.22 %) and support services capital cost (0.73 %). Of the total cost towards the provisioning of OT services, 32.63 % was capital cost while 67.37 % is operating cost. The results of this costing study will help in the future planning of resource allocation within the financial constraints (US$ 1 = INR 54).

Indirect health costs in ulcerative colitis and Crohn's disease: a systematic review and meta-analysis.

PubMed

Kawalec, Paweł; Malinowski, Krzysztof Piotr

2015-04-01

The aim of this systematic review was to collect all current data on indirect costs related to inflammatory bowel disease as well as assessing homogeneity and comparability, and conducting a meta-analysis. Costs were collected using databases from Medline, Embase and Centre for Reviews and Dissemination databases, then average annual cost per patient was calculated and expressed in 2013-rate USD using the consumer price index and purchasing power parity (scenario 1) and then adjusted to specific gross domestic product (scenario 2) to make them comparable. The studies were then included in quantitative synthesis using the meta-analysis and bootstrap methods. This systematic review was carried out and reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. From 18 publications, overall annual indirect costs per patient as a result of the quantitative synthesis among all studies eligible for meta-analysis ranged from US$2425.01-US$9622.15 depending on the scenario and model used for analysis. The cost of presenteeism was assessed in only two studies. Considering heterogeneity among all identified studies random-effect model presented the most accurate results of meta-analysis equal to US$7189.27 and US$9622.15 per patient per year for scenario 1 and scenario 2, respectively. This systematic review revealed the existence of a relatively small number of studies that reported on the great economic burden of the disease upon society. A great variety of methodologies and cost components resulted in a very large discrepancy in indirect costs and made meta-analysis difficult to perform, so two scenarios were considered and meta-analysis conducted in subgroups to make data more comparable.

Determination of iodopropynyl butylcarbamate in cosmetic formulations utilizing pulsed splitless injection, gas chromatography with electron capture detector.

PubMed

Palmer, Kevin B; LaFon, William; Burford, Mark D

2017-09-22

Current analytical methodology for iodopropynyl butylcarbamate (IPBC) analysis focuses on the use of liquid chromatography and mass spectrometer (LC-MS), but the high instrumentation and operator investment required has resulted in the need for a cost effective alternative methodology. Past publications investigating gas chromatography with electron capture detector (GC-ECD) for IPBC quantitation proved largely unsuccessful, likely due to the preservatives limited thermal stability. The use of pulsed injection techniques commonly used for trace analysis of thermally labile pharmaceutical compounds was successfully adapted for IPBC analysis and utilizes the selectivity of GC-ECD analysis. System optimization and sample preparation improvements resulted in substantial performance and reproducibility gains. Cosmetic formulations preserved with IPBC (50-100ppm) were solvated in toluene/isopropyl alcohol and quantified over the 0.3-1.3μg/ml calibration range. The methodology was robust (relative standard deviation 4%), accurate (98% recovery), and sensitive (limit of detection 0.25ng/ml) for use in routine testing of cosmetic formulation preservation. Copyright © 2017 Elsevier B.V. All rights reserved.

A Cross-Sectional Investigation of the Effects of Regional Labor Market Conditions on the Reenlistment Decisions of Air Force Enlistees

DTIC Science & Technology

1991-09-01

Baldwin, Robert H. and Thomas V. Daula. "Army Recruit Attrition and Force Manning Costs: Methodology and Analysis," Research in Labor Economics , ed. Ronald...Methodological Issues and a Proposed Specification," Research in Labor Economics , ed. Ronald Ehrenberg, 7:339-363 (1985b). Baldwin, Robert H. et al. "Military...Manpower Research: An Introduction," Research in Labor Economics , ed. Ronald Ehrenberg, L:257-260 (1985). Dalton, Dan R. et al. "Turnover Overstated: The

Shuttle user analysis (study 2.2). Volume 3: Business risk and value of operations in space (BRAVO). Part 2: User's manual

NASA Technical Reports Server (NTRS)

1974-01-01

The purpose of the BRAVO User's Manual is to describe the BRAVO methodology in terms of step-by-step procedures. The BRAVO methodology then becomes a tool which a team of analysts can utilize to perform cost effectiveness analyses on potential future space applications with a relatively general set of input information and a relatively small expenditure of resources. An overview of the BRAVO procedure is given by describing the complete procedure in a general form.

A probabilistic analysis of silicon cost

NASA Technical Reports Server (NTRS)

Reiter, L. J.

1983-01-01

Silicon materials costs represent both a cost driver and an area where improvement can be made in the manufacture of photovoltaic modules. The cost from three processes for the production of low-cost silicon being developed under the U.S. Department of Energy's (DOE) National Photovoltaic Program is analyzed. The approach is based on probabilistic inputs and makes use of two models developed at the Jet Propulsion Laboratory: SIMRAND (SIMulation of Research ANd Development) and IPEG (Improved Price Estimating Guidelines). The approach, assumptions, and limitations are detailed along with a verification of the cost analyses methodology. Results, presented in the form of cumulative probability distributions for silicon cost, indicate that there is a 55% chance of reaching the DOE target of $16/kg for silicon material. This is a technically achievable cost based on expert forecasts of the results of ongoing research and development and do not imply any market prices for a given year.

Cost allocation methodology applicable to the temporary assistance for needy families program. Final rule.

PubMed

2008-07-23

This final rule applies to the Temporary Assistance for Needy Families (TANF) program and requires States, the District of Columbia and the Territories (hereinafter referred to as the "States") to use the "benefiting program" cost allocation methodology in U.S. Office of Management and Budget (OMB) Circular A-87 (2 CFR part 225). It is the judgment and determination of HHS/ACF that the "benefiting program" cost allocation methodology is the appropriate methodology for the proper use of Federal TANF funds. The Personal Responsibility and Work Opportunity Reconciliation Act (PRWORA) of 1996 gave federally-recognized Tribes the opportunity to operate their own Tribal TANF programs. Federally-recognized Indian tribes operating approved Tribal TANF programs have always followed the "benefiting program" cost allocation methodology in accordance with OMB Circular A-87 (2 CFR part 225) and the applicable regulatory provisions at 45 CFR 286.45(c) and (d). This final rule contains no substantive changes to the proposed rule published on September 27, 2006.

Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, Laura J.; Jadun, Paige; McMillan, Colin A.

This report provides projected cost and performance assumptions for electric technologies considered in the Electrification Futures Study, a detailed and comprehensive analysis of the effects of widespread electrification of end-use service demands in all major economic sectors - transportation, residential and commercial buildings, and industry - for the contiguous United States through 2050. Using extensive literature searches and expert assessment, the authors identify slow, moderate, and rapid technology advancement sensitivities on technology cost and performance, and they offer a comparative analysis of levelized cost metrics as a reference indicator of total costs. The identification and characterization of these end-use servicemore » demand technologies is fundamental to the Electrification Futures Study. This report, the larger Electrification Futures Study, and the associated data and methodologies may be useful to planners and analysts in evaluating the potential role of electrification in an uncertain future. The report could be broadly applicable for other analysts and researchers who wish to assess electrification and electric technologies.« less

A Study on Optimal Sizing of Pipeline Transporting Equi-sized Particulate Solid-Liquid Mixture

NASA Astrophysics Data System (ADS)

Asim, Taimoor; Mishra, Rakesh; Pradhan, Suman; Ubbi, Kuldip

2012-05-01

Pipelines transporting solid-liquid mixtures are of practical interest to the oil and pipe industry throughout the world. Such pipelines are known as slurry pipelines where the solid medium of the flow is commonly known as slurry. The optimal designing of such pipelines is of commercial interests for their widespread acceptance. A methodology has been evolved for the optimal sizing of a pipeline transporting solid-liquid mixture. Least cost principle has been used in sizing such pipelines, which involves the determination of pipe diameter corresponding to the minimum cost for given solid throughput. The detailed analysis with regard to transportation of slurry having solids of uniformly graded particles size has been included. The proposed methodology can be used for designing a pipeline for transporting any solid material for different solid throughput.

A methodology for spacecraft technology insertion analysis balancing benefit, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David Allen

Emerging technologies are changing the way space missions are developed and implemented. Technology development programs are proceeding with the goal of enhancing spacecraft performance and reducing mass and cost. However, it is often the case that technology insertion assessment activities, in the interest of maximizing performance and/or mass reduction, do not consider synergistic system-level effects. Furthermore, even though technical risks are often identified as a large cost and schedule driver, many design processes ignore effects of cost and schedule uncertainty. This research is based on the hypothesis that technology selection is a problem of balancing interrelated (and potentially competing) objectives. Current spacecraft technology selection approaches are summarized, and a Methodology for Evaluating and Ranking Insertion of Technology (MERIT) that expands on these practices to attack otherwise unsolved problems is demonstrated. MERIT combines the modern techniques of technology maturity measures, parametric models, genetic algorithms, and risk assessment (cost and schedule) in a unique manner to resolve very difficult issues including: user-generated uncertainty, relationships between cost/schedule and complexity, and technology "portfolio" management. While the methodology is sufficiently generic that it may in theory be applied to a number of technology insertion problems, this research focuses on application to the specific case of small (<500 kg) satellite design. Small satellite missions are of particular interest because they are often developed under rigid programmatic (cost and schedule) constraints and are motivated to introduce advanced technologies into the design. MERIT is demonstrated for programs procured under varying conditions and constraints such as stringent performance goals, not-to-exceed costs, or hard schedule requirements. MERIT'S contributions to the engineering community are its: unique coupling of the aspects of performance, cost, and schedule; assessment of system level impacts of technology insertion; procedures for estimating uncertainties (risks) associated with advanced technology; and application of heuristics to facilitate informed system-level technology utilization decisions earlier in the conceptual design phase. MERIT extends the state of the art in technology insertion assessment selection practice and, if adopted, may aid designers in determining the configuration of complex systems that meet essential requirements in a timely, cost-effective manner.

Enhanced methods for determining operational capabilities and support costs of proposed space systems

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1993-01-01

This report documents the work accomplished during the first two years of research to provide support to NASA in predicting operational and support parameters and costs of proposed space systems. The first year's research developed a methodology for deriving reliability and maintainability (R & M) parameters based upon the use of regression analysis to establish empirical relationships between performance and design specifications and corresponding mean times of failure and repair. The second year focused on enhancements to the methodology, increased scope of the model, and software improvements. This follow-on effort expands the prediction of R & M parameters and their effect on the operations and support of space transportation vehicles to include other system components such as booster rockets and external fuel tanks. It also increases the scope of the methodology and the capabilities of the model as implemented by the software. The focus is on the failure and repair of major subsystems and their impact on vehicle reliability, turn times, maintenance manpower, and repairable spares requirements. The report documents the data utilized in this study, outlines the general methodology for estimating and relating R&M parameters, presents the analyses and results of application to the initial data base, and describes the implementation of the methodology through the use of a computer model. The report concludes with a discussion on validation and a summary of the research findings and results.

Assessing cost-effectiveness in mental health: family interventions for schizophrenia and related conditions.

PubMed

Mihalopoulos, Cathrine; Magnus, Anne; Carter, Rob; Vos, Theo

2004-07-01

Existing evidence suggests that family interventions can be effective in reducing relapse rates in schizophrenia and related conditions. Despite this, such interventions are not routinely delivered in Australian mental health services. The objective of the current study is to investigate the incremental cost-effectiveness ratios (ICERs) of introducing three types of family interventions, namely: behavioural family management (BFM); behavioural intervention for families (BIF); and multiple family groups (MFG) into current mental health services in Australia. The ICER of each of the family interventions is assessed from a health sector perspective, including the government, persons with schizophrenia and their families/carers using a standardized methodology. A two-stage approach is taken to the assessment of benefit. The first stage involves a quantitative analysis based on disability-adjusted life years (DALYs) averted. The second stage involves application of 'second filter' criteria (including equity, strength of evidence, feasibility and acceptability to stakeholders) to results. The robustness of results is tested using multivariate probabilistic sensitivity analysis. The most cost-effective intervention, in order of magnitude, is BIF (8000 Australian dollars per DALY averted), followed by MFG (21,000 Australian dollars per DALY averted) and lastly BFM (28,000 Australian dollars per DALY averted). The inclusion of time costs makes BFM more cost-effective than MFG. Variation of discount rate has no effect on conclusions. All three interventions are considered 'value-for-money' within an Australian context. This conclusion needs to be tempered against the methodological challenge of converting clinical outcomes into a generic economic outcome measure (DALY). Issues surrounding the feasibility of routinely implementing such interventions need to be addressed.

Economic Analysis of a Multi-Site Prevention Program: Assessment of Program Costs and Characterizing Site-level Variability

PubMed Central

Corso, Phaedra S.; Ingels, Justin B.; Kogan, Steven M.; Foster, E. Michael; Chen, Yi-Fu; Brody, Gene H.

2013-01-01

Programmatic cost analyses of preventive interventions commonly have a number of methodological difficulties. To determine the mean total costs and properly characterize variability, one often has to deal with small sample sizes, skewed distributions, and especially missing data. Standard approaches for dealing with missing data such as multiple imputation may suffer from a small sample size, a lack of appropriate covariates, or too few details around the method used to handle the missing data. In this study, we estimate total programmatic costs for a prevention trial evaluating the Strong African American Families-Teen program. This intervention focuses on the prevention of substance abuse and risky sexual behavior. To account for missing data in the assessment of programmatic costs we compare multiple imputation to probabilistic sensitivity analysis. The latter approach uses collected cost data to create a distribution around each input parameter. We found that with the multiple imputation approach, the mean (95% confidence interval) incremental difference was $2149 ($397, $3901). With the probabilistic sensitivity analysis approach, the incremental difference was $2583 ($778, $4346). Although the true cost of the program is unknown, probabilistic sensitivity analysis may be a more viable alternative for capturing variability in estimates of programmatic costs when dealing with missing data, particularly with small sample sizes and the lack of strong predictor variables. Further, the larger standard errors produced by the probabilistic sensitivity analysis method may signal its ability to capture more of the variability in the data, thus better informing policymakers on the potentially true cost of the intervention. PMID:23299559

Economic analysis of a multi-site prevention program: assessment of program costs and characterizing site-level variability.

PubMed

Corso, Phaedra S; Ingels, Justin B; Kogan, Steven M; Foster, E Michael; Chen, Yi-Fu; Brody, Gene H

2013-10-01

Programmatic cost analyses of preventive interventions commonly have a number of methodological difficulties. To determine the mean total costs and properly characterize variability, one often has to deal with small sample sizes, skewed distributions, and especially missing data. Standard approaches for dealing with missing data such as multiple imputation may suffer from a small sample size, a lack of appropriate covariates, or too few details around the method used to handle the missing data. In this study, we estimate total programmatic costs for a prevention trial evaluating the Strong African American Families-Teen program. This intervention focuses on the prevention of substance abuse and risky sexual behavior. To account for missing data in the assessment of programmatic costs we compare multiple imputation to probabilistic sensitivity analysis. The latter approach uses collected cost data to create a distribution around each input parameter. We found that with the multiple imputation approach, the mean (95 % confidence interval) incremental difference was $2,149 ($397, $3,901). With the probabilistic sensitivity analysis approach, the incremental difference was $2,583 ($778, $4,346). Although the true cost of the program is unknown, probabilistic sensitivity analysis may be a more viable alternative for capturing variability in estimates of programmatic costs when dealing with missing data, particularly with small sample sizes and the lack of strong predictor variables. Further, the larger standard errors produced by the probabilistic sensitivity analysis method may signal its ability to capture more of the variability in the data, thus better informing policymakers on the potentially true cost of the intervention.

Eco-efficiency for greenhouse gas emissions mitigation of municipal solid waste management: a case study of Tianjin, China.

PubMed

Zhao, Wei; Huppes, Gjalt; van der Voet, Ester

2011-06-01

The issue of municipal solid waste (MSW) management has been highlighted in China due to the continually increasing MSW volumes being generated and the limited capacity of waste treatment facilities. This article presents a quantitative eco-efficiency (E/E) analysis on MSW management in terms of greenhouse gas (GHG) mitigation. A methodology for E/E analysis has been proposed, with an emphasis on the consistent integration of life cycle assessment (LCA) and life cycle costing (LCC). The environmental and economic impacts derived from LCA and LCC have been normalized and defined as a quantitative E/E indicator. The proposed method was applied in a case study of Tianjin, China. The study assessed the current MSW management system, as well as a set of alternative scenarios, to investigate trade-offs between economy and GHG emissions mitigation. Additionally, contribution analysis was conducted on both LCA and LCC to identify key issues driving environmental and economic impacts. The results show that the current Tianjin's MSW management system emits the highest GHG and costs the least, whereas the situation reverses in the integrated scenario. The key issues identified by the contribution analysis show no linear relationship between the global warming impact and the cost impact in MSW management system. The landfill gas utilization scenario is indicated as a potential optimum scenario by the proposed E/E analysis, given the characteristics of MSW, technology levels, and chosen methodologies. The E/E analysis provides an attractive direction towards sustainable waste management, though some questions with respect to uncertainty need to be discussed further. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluating the effects of variation in clinical practice: a risk adjusted cost-effectiveness (RAC-E) analysis of acute stroke services.

PubMed

Pham, Clarabelle; Caffrey, Orla; Ben-Tovim, David; Hakendorf, Paul; Crotty, Maria; Karnon, Jonathan

2012-08-21

Methods for the cost-effectiveness analysis of health technologies are now well established, but such methods may also have a useful role in the context of evaluating the effects of variation in applied clinical practice. This study illustrates a general methodology for the comparative analysis of applied clinical practice at alternative institutions--risk adjusted cost-effectiveness (RAC-E) analysis--with an application that compares acute hospital services for stroke patients admitted to the main public hospitals in South Australia. Using linked, routinely collected data on all South Australian hospital separations from July 2001 to June 2008, an analysis of the RAC-E of services provided at four metropolitan hospitals was undertaken using a decision analytic framework. Observed (plus extrapolated) and expected lifetime costs and survival were compared across patient populations, from which the relative cost-effectiveness of services provided at the different hospitals was estimated. Unadjusted results showed that at one hospital patients incurred fewer costs and gained more life years than at the other hospitals (i.e. it was the dominant hospital). After risk adjustment, the cost minimizing hospital incurred the lowest costs, but with fewer life-years gained than one other hospital. The mean incremental cost per life-year gained of services provided at the most effective hospital was under $20,000, with an associated 65% probability of being cost-effective at a $50,000 per life year monetary threshold. RAC-E analyses can be used to identify important variation in the costs and outcomes associated with clinical practice at alternative institutions. Such data provides an impetus for further investigation to identify specific areas of variation, which may then inform the dissemination of best practice service delivery and organisation.

Rural energy survey and cost-effectiveness analysis of renewable-energy technologies for a Philippine Island community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manibog, F.R.

1982-01-01

This study presents the methodology and results of: (1) a rural energy survey that was conducted in a Philippine island community; and (2) a cost-effectiveness analysis of selected conventional and renewable-energy technologies. The rural energy survey section compares different survey techniques and analyzes energy utilization by providing: (1) a breakdown of energy flows and use patterns; (2) information on energy prices, ownership patterns, social relations, and their effects in terms of differential access to energy sources; (3) per household and per capita consumption figures; and (4) a village energy-consumption table. Correlation analysis is used to determine if the stratified, independentmore » socio-economic variables are indicators for dependent energy variables. Results of the economic analysis indicate that renewable-energy technologies are already least-cost alternatives to diesel generation in the village case study. The sensitivity analysis also shows that these technologies remain the least-cost options even if their capital costs were underestimated. The findings of the study are useful to the current Philippine renewable-energy program in terms of providing: (1) information essential for determining end-users' priority energy needs and for improving technology choice and project design; and (2) justification for promoting auto-generation based on renewable energy sources as alternatives to diesel fuel.« less

Cost-effectiveness analysis of population-based tobacco control strategies in the prevention of cardiovascular diseases in Tanzania.

PubMed

Ngalesoni, Frida; Ruhago, George; Mayige, Mary; Oliveira, Tiago Cravo; Robberstad, Bjarne; Norheim, Ole Frithjof; Higashi, Hideki

2017-01-01

Tobacco consumption contributes significantly to the global burden of disease. The prevalence of smoking is estimated to be increasing in many low-income countries, including Tanzania, especially among women and youth. Even so, the implementation of tobacco control measures has been discouraging in the country. Efforts to foster investment in tobacco control are hindered by lack of evidence on what works and at what cost. We aim to estimate the cost and cost-effectiveness of population-based tobacco control strategies in the prevention of cardiovascular diseases (CVD) in Tanzania. A cost-effectiveness analysis was performed using an Excel-based Markov model, from a governmental perspective. We employed an ingredient approach and step-down methodologies in the costing exercise following a government perspective. Epidemiological data and efficacy inputs were derived from the literature. We used disability-adjusted life years (DALYs) averted as the outcome measure. A probabilistic sensitivity analysis was carried out with Ersatz to incorporate uncertainties in the model parameters. Our model results showed that all five tobacco control strategies were very cost-effective since they fell below the ceiling ratio of one GDP per capita suggested by the WHO. Increase in tobacco taxes was the most cost-effective strategy, while a workplace smoking ban was the least cost-effective option, with a cost-effectiveness ratio of US$5 and US$267, respectively. Even though all five interventions are deemed very cost-effective in the prevention of CVD in Tanzania, more research on budget impact analysis is required to further assess the government's ability to implement these interventions.

System Risk Assessment and Allocation in Conceptual Design

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Smith, Natasha L.; Zang, Thomas A. (Technical Monitor)

2003-01-01

As aerospace systems continue to evolve in addressing newer challenges in air and space transportation, there exists a heightened priority for significant improvement in system performance, cost effectiveness, reliability, and safety. Tools, which synthesize multidisciplinary integration, probabilistic analysis, and optimization, are needed to facilitate design decisions allowing trade-offs between cost and reliability. This study investigates tools for probabilistic analysis and probabilistic optimization in the multidisciplinary design of aerospace systems. A probabilistic optimization methodology is demonstrated for the low-fidelity design of a reusable launch vehicle at two levels, a global geometry design and a local tank design. Probabilistic analysis is performed on a high fidelity analysis of a Navy missile system. Furthermore, decoupling strategies are introduced to reduce the computational effort required for multidisciplinary systems with feedback coupling.

An experimental strategy validated to design cost-effective culture media based on response surface methodology.

PubMed

Navarrete-Bolaños, J L; Téllez-Martínez, M G; Miranda-López, R; Jiménez-Islas, H

2017-07-03

For any fermentation process, the production cost depends on several factors, such as the genetics of the microorganism, the process condition, and the culture medium composition. In this work, a guideline for the design of cost-efficient culture media using a sequential approach based on response surface methodology is described. The procedure was applied to analyze and optimize a culture medium of registered trademark and a base culture medium obtained as a result of the screening analysis from different culture media used to grow the same strain according to the literature. During the experiments, the procedure quantitatively identified an appropriate array of micronutrients to obtain a significant yield and find a minimum number of culture medium ingredients without limiting the process efficiency. The resultant culture medium showed an efficiency that compares favorably with the registered trademark medium at a 95% lower cost as well as reduced the number of ingredients in the base culture medium by 60% without limiting the process efficiency. These results demonstrated that, aside from satisfying the qualitative requirements, an optimum quantity of each constituent is needed to obtain a cost-effective culture medium. Study process variables for optimized culture medium and scaling-up production for the optimal values are desirable.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petruccelli, Umberto, E-mail: umberto.petruccelli@unibas.it

Many studies about the external costs generated by the transport system have been developed in the last twenty years. To standardize methodologies and assessment procedures to be used in the evaluation of the projects, some European countries recently have adopted specific guidelines that differ from each other in some aspects even sensibly. This paper presents a critical analysis of the British, Italian and German guidelines and is aimed at cataloguing the external cost types regarded and the assessment methods indicated as well as to highlight the differences of the results, in terms of applicability and reliability. The goal is tomore » contribute to a European standardization process that would lead to the drafting of guidelines suited for all EU countries. - Highlights: • The analyzed guidelines agree on the methods to evaluate costs from air pollution, greenhouse gases and accidents. • They recommend respectively: dose-resp. approach; costs to reduce/permit emissions; whole direct, indirect and social costs. • For noise, DE guide indicates defensive expenditure or SP methods; IT guide, SP method; UK guide, the hedonic prices one. • For on territory impact, DE guide regards only the barrier effect; the IT one, also the soil consumption and system effects. • British guide proposes a qualitative methodology to estimate the impact on various landscapes and environments.« less

Critical care medicine beds, use, occupancy and costs in the United States: a methodological review

PubMed Central

Halpern, Neil A; Pastores, Stephen M.

2017-01-01

This article is a methodological review to help the intensivist gain insights into the classic and sometimes arcane maze of national databases and methodologies used to determine and analyze the intensive care unit (ICU) bed supply, occupancy rates, and costs in the United States (US). Data for total ICU beds, use and occupancy can be derived from two large national healthcare databases: the Healthcare Cost Report Information System (HCRIS) maintained by the federal Centers for Medicare and Medicaid Services (CMS) and the proprietary Hospital Statistics of the American Hospital Association (AHA). Two costing methodologies can be used to calculate ICU costs: the Russell equation and national projections. Both methods are based on cost and use data from the national hospital datasets or from defined groups of hospitals or patients. At the national level, an understanding of US ICU beds, use and cost helps provide clarity to the width and scope of the critical care medicine (CCM) enterprise within the US healthcare system. This review will also help the intensivist better understand published studies on administrative topics related to CCM and be better prepared to participate in their own local hospital organizations or regional CCM programs. PMID:26308432

Intermountain Health Care, Inc.: Standard Costing System Methodology and Implementation

PubMed Central

Rosqvist, W.V.

1984-01-01

Intermountain Health Care, Inc. (IHC) a notfor-profit hospital chain with 22 hospitals in the intermountain area and corporate offices located in Salt Lake City, Utah, has developed a Standard Costing System to provide hospital management with a tool for confronting increased cost pressures in the health care environment. This document serves as a description of methodology used in developing the standard costing system and outlines the implementation process.

Costing of physical activity programmes in primary prevention: a review of the literature

PubMed Central

2011-01-01

This literature review aims to analyse the costing methodology in economic analyses of primary preventive physical activity programmes. It demonstrates the usability of a recently published theoretical framework in practice, and may serve as a guide for future economic evaluation studies and for decision making. A comprehensive literature search was conducted to identify all relevant studies published before December 2009. All studies were analysed regarding their key economic findings and their costing methodology. In summary, 18 international economic analyses of primary preventive physical activity programmes were identified. Many of these studies conclude that the investigated intervention provides good value for money compared with alternatives (no intervention, usual care or different programme) or is even cost-saving. Although most studies did provide a description of the cost of the intervention programme, methodological details were often not displayed, and savings resulting from the health effects of the intervention were not always included sufficiently. This review shows the different costing methodologies used in the current health economic literature and compares them with a theoretical framework. The high variability regarding the costs assessment and the lack of transparency concerning the methods limits the comparability of the results, which points out the need for a handy minimal dataset of cost assessment. PMID:22827967

Population-Level Cost-Effectiveness of Implementing Evidence-Based Practices into Routine Care

PubMed Central

Fortney, John C; Pyne, Jeffrey M; Burgess, James F

2014-01-01

Objective The objective of this research was to apply a new methodology (population-level cost-effectiveness analysis) to determine the value of implementing an evidence-based practice in routine care. Data Sources/Study Setting Data are from sequentially conducted studies: a randomized controlled trial and an implementation trial of collaborative care for depression. Both trials were conducted in the same practice setting and population (primary care patients prescribed antidepressants). Study Design The study combined results from a randomized controlled trial and a pre-post-quasi-experimental implementation trial. Data Collection/Extraction Methods The randomized controlled trial collected quality-adjusted life years (QALYs) from survey and medication possession ratios (MPRs) from administrative data. The implementation trial collected MPRs and intervention costs from administrative data and implementation costs from survey. Principal Findings In the randomized controlled trial, MPRs were significantly correlated with QALYs (p = .03). In the implementation trial, patients at implementation sites had significantly higher MPRs (p = .01) than patients at control sites, and by extrapolation higher QALYs (0.00188). Total costs (implementation, intervention) were nonsignificantly higher ($63.76) at implementation sites. The incremental population-level cost-effectiveness ratio was $33,905.92/QALY (bootstrap interquartile range −$45,343.10/QALY to $99,260.90/QALY). Conclusions The methodology was feasible to operationalize and gave reasonable estimates of implementation value. PMID:25328029

Application of risk analysis in water resourses management

NASA Astrophysics Data System (ADS)

Varouchakis, Emmanouil; Palogos, Ioannis

2017-04-01

A common cost-benefit analysis approach, which is novel in the risk analysis of hydrologic/hydraulic applications, and a Bayesian decision analysis are applied to aid the decision making on whether or not to construct a water reservoir for irrigation purposes. The alternative option examined is a scaled parabolic fine variation in terms of over-pumping violations in contrast to common practices that usually consider short-term fines. Such an application, and in such detail, represents new feedback. The results indicate that the probability uncertainty is the driving issue that determines the optimal decision with each methodology, and depending on the unknown probability handling, each methodology may lead to a different optimal decision. Thus, the proposed tool can help decision makers (stakeholders) to examine and compare different scenarios using two different approaches before making a decision considering the cost of a hydrologic/hydraulic project and the varied economic charges that water table limit violations can cause inside an audit interval. In contrast to practices that assess the effect of each proposed action separately considering only current knowledge of the examined issue, this tool aids decision making by considering prior information and the sampling distribution of future successful audits. This tool is developed in a web service for the easier stakeholders' access.

Cost of delivering secondary-level health care services through public sector district hospitals in India.

PubMed

Prinja, Shankar; Balasubramanian, Deepak; Jeet, Gursimer; Verma, Ramesh; Kumar, Dinesh; Bahuguna, Pankaj; Kaur, Manmeet; Kumar, Rajesh

2017-09-01

Despite an impetus for strengthening public sector district hospitals for provision of secondary health care in India, there is lack of robust evidence on cost of services provided through these district hospitals. In this study, an attempt was made to determine the unit cost of an outpatient visit consultation, inpatient bed-day of hospitalization, surgical procedure and overall per-capita cost of providing secondary care through district hospitals. Economic costing of five randomly selected district hospitals in two north Indian States - Haryana and Punjab, was undertaken. Cost analysis was done using a health system perspective and employing bottom-up costing methodology. Quantity of all resources - capital or recurrent, used for delivering services was measured and valued. Median unit costs were estimated along with their 95 per cent confidence intervals. Sensitivity analysis was undertaken to assess the effect of uncertainties in prices and other assumptions; and to generalize the findings for Indian set-up. The overall annual cost of delivering secondary-level health care services through a public sector district hospital in north India was ' 11,44,13,282 [US Dollars (USD) 2,103,185]. Human resources accounted for 53 per cent of the overall cost. The unit cost of an inpatient bed-day, surgical procedure and outpatient consultation was ' 844 (USD 15.5), ' 3481 (USD 64) and ' 170 (USD 3.1), respectively. With the current set of resource allocation, per-capita cost of providing health care through district hospitals in north India was ' 139 (USD 2.5). The estimates obtained in our study can be used for Fiscal planning of scaling up secondary-level health services. Further, these may be particularly useful for future research such as benefit-incidence analysis, cost-effectiveness analysis and national health accounts including disease-specific accounts in India.

A systematic review of the cost and cost-effectiveness of electronic discharge communications.

PubMed

Sevick, Laura K; Esmail, Rosmin; Tang, Karen; Lorenzetti, Diane L; Ronksley, Paul; James, Matthew; Santana, Maria; Ghali, William A; Clement, Fiona

2017-07-02

The transition between acute care and community care can be a vulnerable period in a patients' treatment due to the potential for postdischarge adverse events. The vulnerability of this period has been attributed to factors related to the miscommunication between hospital-based and community-based physicians. Electronic discharge communication has been proposed as one solution to bridge this communication gap. Prior to widespread implementation of these tools, the costs and benefits should be considered. To establish the cost and cost-effectiveness of electronic discharge communications compared with traditional discharge systems for individuals who have completed care with one provider and are transitioning care to a new provider. We conducted a systematic review of the published literature, using best practices, to identify economic evaluations/cost analyses of electronic discharge communication tools. Inclusion criteria were: (1) economic analysis and (2) electronic discharge communication tool as the intervention. Quality of each article was assessed, and data were summarised using a component-based analysis. One thousand unique abstracts were identified, and 57 full-text articles were assessed for eligibility. Four studies met final inclusion criteria. These studies varied in their primary objectives, methodology, costs reported and outcomes. All of the studies were of low to good quality. Three of the studies reported a cost-effectiveness measure ranging from an incremental daily cost of decreasing average discharge note completion by 1 day of $0.331 (2003 Canadian), a cost per page per discharge letter of €9.51 and a dynamic net present value of €31.1 million for a 5-year implementation of the intervention. None of the identified studies considered clinically meaningful patient or quality outcomes. Economic analyses of electronic discharge communications are scarcely reported, and with inconsistent methodology and outcomes. Further studies are needed to understand the cost-effectiveness and value for patient care. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Recommendations for Conduct, Methodological Practices, and Reporting of Cost-effectiveness Analyses: Second Panel on Cost-Effectiveness in Health and Medicine.

PubMed

Sanders, Gillian D; Neumann, Peter J; Basu, Anirban; Brock, Dan W; Feeny, David; Krahn, Murray; Kuntz, Karen M; Meltzer, David O; Owens, Douglas K; Prosser, Lisa A; Salomon, Joshua A; Sculpher, Mark J; Trikalinos, Thomas A; Russell, Louise B; Siegel, Joanna E; Ganiats, Theodore G

2016-09-13

Since publication of the report by the Panel on Cost-Effectiveness in Health and Medicine in 1996, researchers have advanced the methods of cost-effectiveness analysis, and policy makers have experimented with its application. The need to deliver health care efficiently and the importance of using analytic techniques to understand the clinical and economic consequences of strategies to improve health have increased in recent years. To review the state of the field and provide recommendations to improve the quality of cost-effectiveness analyses. The intended audiences include researchers, government policy makers, public health officials, health care administrators, payers, businesses, clinicians, patients, and consumers. In 2012, the Second Panel on Cost-Effectiveness in Health and Medicine was formed and included 2 co-chairs, 13 members, and 3 additional members of a leadership group. These members were selected on the basis of their experience in the field to provide broad expertise in the design, conduct, and use of cost-effectiveness analyses. Over the next 3.5 years, the panel developed recommendations by consensus. These recommendations were then reviewed by invited external reviewers and through a public posting process. The concept of a "reference case" and a set of standard methodological practices that all cost-effectiveness analyses should follow to improve quality and comparability are recommended. All cost-effectiveness analyses should report 2 reference case analyses: one based on a health care sector perspective and another based on a societal perspective. The use of an "impact inventory," which is a structured table that contains consequences (both inside and outside the formal health care sector), intended to clarify the scope and boundaries of the 2 reference case analyses is also recommended. This special communication reviews these recommendations and others concerning the estimation of the consequences of interventions, the valuation of health outcomes, and the reporting of cost-effectiveness analyses. The Second Panel reviewed the current status of the field of cost-effectiveness analysis and developed a new set of recommendations. Major changes include the recommendation to perform analyses from 2 reference case perspectives and to provide an impact inventory to clarify included consequences.

Costs of examinations performed in a hospital laboratory in Chile.

PubMed

Andrade, Germán Lobos; Palma, Carolina Salas

2018-01-01

To determine the total average costs related to laboratory examinations performed in a hospital laboratory in Chile. Retrospective study with data from July 2014 to June 2015. 92 examinations classified in ten groups were selected according to the analysis methodology. The costs were estimated as the sum of direct and indirect laboratory costs and indirect institutional factors. The average values obtained for the costs according to examination group (in USD) were: 1.79 (clinical chemistry), 10.21 (immunoassay techniques), 13.27 (coagulation), 26.06 (high-performance liquid chromatography), 21.2 (immunological), 3.85 (gases and electrolytes), 156.48 (cytogenetic), 1.38 (urine), 4.02 (automated hematological), 4.93 (manual hematological). The value, or service fee, returned to public institutions who perform laboratory services does not adequately reflect the true total average production costs of examinations.

A systematic review of cost-effectiveness analyses of complex wound interventions reveals optimal treatments for specific wound types.

PubMed

Tricco, Andrea C; Cogo, Elise; Isaranuwatchai, Wanrudee; Khan, Paul A; Sanmugalingham, Geetha; Antony, Jesmin; Hoch, Jeffrey S; Straus, Sharon E

2015-04-22

Complex wounds present a substantial economic burden on healthcare systems, costing billions of dollars annually in North America alone. The prevalence of complex wounds is a significant patient and societal healthcare concern and cost-effective wound care management remains unclear. This article summarizes the cost-effectiveness of interventions for complex wound care through a systematic review of the evidence base. We searched multiple databases (MEDLINE, EMBASE, Cochrane Library) for cost-effectiveness studies that examined adults treated for complex wounds. Two reviewers independently screened the literature, abstracted data from full-text articles, and assessed methodological quality using the Drummond 10-item methodological quality tool. Incremental cost-effectiveness ratios were reported, or, if not reported, calculated and converted to United States Dollars for the year 2013. Overall, 59 cost-effectiveness analyses were included; 71% (42 out of 59) of the included studies scored 8 or more points on the Drummond 10-item checklist tool. Based on these, 22 interventions were found to be more effective and less costly (i.e., dominant) compared to the study comparators: 9 for diabetic ulcers, 8 for venous ulcers, 3 for pressure ulcers, 1 for mixed venous and venous/arterial ulcers, and 1 for mixed complex wound types. Our results can be used by decision-makers in maximizing the deployment of clinically effective and resource efficient wound care interventions. Our analysis also highlights specific treatments that are not cost-effective, thereby indicating areas of resource savings. Please see related article: http://dx.doi.org/10.1186/s12916-015-0288-5.

Top Level Space Cost Methodology (TLSCM)

DTIC Science & Technology

1997-12-02

Software 7 6. ACEIT . 7 C. Ground Rules and Assumptions 7 D. Typical Life Cycle Cost Distribution 7 E. Methodologies 7 1. Cost/budget Threshold 9 2. Analogy...which is based on real-time Air Force and space programs. Ref.(25:2- 8, 2-9) 6. ACEIT : Automated Cost Estimating Integrated Tools( ACEIT ), Tecolote...Research, Inc. There is a way to use the ACEIT cost program to get a print-out of an expanded WBS. Therefore, find someone that has ACEIT experience and

Space Biology Initiative. Trade Studies, volume 2

NASA Technical Reports Server (NTRS)

1989-01-01

The six studies which are the subjects of this report are entitled: Design Modularity and Commonality; Modification of Existing Hardware (COTS) vs. New Hardware Build Cost Analysis; Automation Cost vs. Crew Utilization; Hardware Miniaturization versus Cost; Space Station Freedom/Spacelab Modules Compatibility vs. Cost; and Prototype Utilization in the Development of Space Hardware. The product of these six studies was intended to provide a knowledge base and methodology that enables equipment produced for the Space Biology Initiative program to meet specific design and functional requirements in the most efficient and cost effective form consistent with overall mission integration parameters. Each study promulgates rules of thumb, formulas, and matrices that serves as a handbook for the use and guidance of designers and engineers in design, development, and procurement of Space Biology Initiative (SBI) hardware and software.

Space Biology Initiative. Trade Studies, volume 1

NASA Technical Reports Server (NTRS)

1989-01-01

The six studies which are addressed are entitled: Design Modularity and Commonality; Modification of Existing Hardware (COTS) vs. New Hardware Build Cost Analysis; Automation Cost vs. Crew Utilization; Hardware Miniaturization versus Cost; Space Station Freedom/Spacelab Modules Compatibility vs. Cost; and Prototype Utilization in the Development of Space Hardware. The product of these six studies was intended to provide a knowledge base and methodology that enables equipment produced for the Space Biology Initiative program to meet specific design and functional requirements in the most efficient and cost effective form consistent with overall mission integration parameters. Each study promulgates rules of thumb, formulas, and matrices that serves has a handbook for the use and guidance of designers and engineers in design, development, and procurement of Space Biology Initiative (SBI) hardware and software.

Evaluation of solar thermal power plants using economic and performance simulations

NASA Technical Reports Server (NTRS)

El-Gabawali, N.

1980-01-01

An energy cost analysis is presented for central receiver power plants with thermal storage and point focusing power plants with electrical storage. The present approach is based on optimizing the size of the plant to give the minimum energy cost (in mills/kWe hr) of an annual plant energy production. The optimization is done by considering the trade-off between the collector field size and the storage capacity for a given engine size. The energy cost is determined by the plant cost and performance. The performance is estimated by simulating the behavior of the plant under typical weather conditions. Plant capital and operational costs are estimated based on the size and performance of different components. This methodology is translated into computer programs for automatic and consistent evaluation.

Micro-cost Analysis of ALK Rearrangement Testing by FISH to Determine Eligibility for Crizotinib Therapy in NSCLC: Implications for Cost Effectiveness of Testing and Treatment.

PubMed

Parker, David; Belaud-Rotureau, Marc-Antoine

2014-01-01

Break-apart fluorescence in situ hybridization (FISH) is the gold standard test for anaplastic lymphoma kinase (ALK) gene rearrangement. However, this methodology often is assumed to be expensive and potentially cost-prohibitive given the low prevalence of ALK-positive non-small cell lung cancer (NSCLC) cases. To more accurately estimate the cost of ALK testing by FISH, we developed a micro-cost model that accounts for all cost elements of the assay, including laboratory reagents, supplies, capital equipment, technical and pathologist labor, and the acquisition cost of the commercial test and associated reagent kits and controls. By applying a set of real-world base-case parameter values, we determined that the cost of a single ALK break-apart FISH test result is $278.01. Sensitivity analysis on the parameters of batch size, testing efficiency, and the cost of the commercial diagnostic testing products revealed that the cost per result is highly sensitive to batch size, but much less so to efficiency or product cost. This implies that ALK testing by FISH will be most cost effective when performed in high-volume centers. Our results indicate that testing cost may not be the primary determinant of crizotinib (Xalkori(®)) treatment cost effectiveness, and suggest that testing cost is an insufficient reason to limit the use of FISH testing for ALK rearrangement.

Micro-cost Analysis of ALK Rearrangement Testing by FISH to Determine Eligibility for Crizotinib Therapy in NSCLC: Implications for Cost Effectiveness of Testing and Treatment

PubMed Central

Parker, David; Belaud-Rotureau, Marc-Antoine

2014-01-01

Break-apart fluorescence in situ hybridization (FISH) is the gold standard test for anaplastic lymphoma kinase (ALK) gene rearrangement. However, this methodology often is assumed to be expensive and potentially cost-prohibitive given the low prevalence of ALK-positive non-small cell lung cancer (NSCLC) cases. To more accurately estimate the cost of ALK testing by FISH, we developed a micro-cost model that accounts for all cost elements of the assay, including laboratory reagents, supplies, capital equipment, technical and pathologist labor, and the acquisition cost of the commercial test and associated reagent kits and controls. By applying a set of real-world base-case parameter values, we determined that the cost of a single ALK break-apart FISH test result is $278.01. Sensitivity analysis on the parameters of batch size, testing efficiency, and the cost of the commercial diagnostic testing products revealed that the cost per result is highly sensitive to batch size, but much less so to efficiency or product cost. This implies that ALK testing by FISH will be most cost effective when performed in high-volume centers. Our results indicate that testing cost may not be the primary determinant of crizotinib (Xalkori®) treatment cost effectiveness, and suggest that testing cost is an insufficient reason to limit the use of FISH testing for ALK rearrangement. PMID:25520569

Propulsion integration of hypersonic air-breathing vehicles utilizing a top-down design methodology

NASA Astrophysics Data System (ADS)

Kirkpatrick, Brad Kenneth

In recent years, a focus of aerospace engineering design has been the development of advanced design methodologies and frameworks to account for increasingly complex and integrated vehicles. Techniques such as parametric modeling, global vehicle analyses, and interdisciplinary data sharing have been employed in an attempt to improve the design process. The purpose of this study is to introduce a new approach to integrated vehicle design known as the top-down design methodology. In the top-down design methodology, the main idea is to relate design changes on the vehicle system and sub-system level to a set of over-arching performance and customer requirements. Rather than focusing on the performance of an individual system, the system is analyzed in terms of the net effect it has on the overall vehicle and other vehicle systems. This detailed level of analysis can only be accomplished through the use of high fidelity computational tools such as Computational Fluid Dynamics (CFD) or Finite Element Analysis (FEA). The utility of the top-down design methodology is investigated through its application to the conceptual and preliminary design of a long-range hypersonic air-breathing vehicle for a hypothetical next generation hypersonic vehicle (NHRV) program. System-level design is demonstrated through the development of the nozzle section of the propulsion system. From this demonstration of the methodology, conclusions are made about the benefits, drawbacks, and cost of using the methodology.

Valuing Climate Change Impacts on Human Health: Empirical Evidence from the Literature

PubMed Central

Markandya, Anil; Chiabai, Aline

2009-01-01

There is a broad consensus that climate change will increase the costs arising from diseases such as malaria and diarrhea and, furthermore, that the largest increases will be in developing countries. One of the problems is the lack of studies measuring these costs systematically and in detail. This paper critically reviews a number of studies about the costs of planned adaptation in the health context, and compares current health expenditures with MDGs which are felt to be inadequate when considering climate change impacts. The analysis serves also as a critical investigation of the methodologies used and aims at identifying research weaknesses and gaps. PMID:19440414

An Integrated Approach to Life Cycle Analysis

NASA Technical Reports Server (NTRS)

Chytka, T. M.; Brown, R. W.; Shih, A. T.; Reeves, J. D.; Dempsey, J. A.

2006-01-01

Life Cycle Analysis (LCA) is the evaluation of the impacts that design decisions have on a system and provides a framework for identifying and evaluating design benefits and burdens associated with the life cycles of space transportation systems from a "cradle-to-grave" approach. Sometimes called life cycle assessment, life cycle approach, or "cradle to grave analysis", it represents a rapidly emerging family of tools and techniques designed to be a decision support methodology and aid in the development of sustainable systems. The implementation of a Life Cycle Analysis can vary and may take many forms; from global system-level uncertainty-centered analysis to the assessment of individualized discriminatory metrics. This paper will focus on a proven LCA methodology developed by the Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center to quantify and assess key LCA discriminatory metrics, in particular affordability, reliability, maintainability, and operability. This paper will address issues inherent in Life Cycle Analysis including direct impacts, such as system development cost and crew safety, as well as indirect impacts, which often take the form of coupled metrics (i.e., the cost of system unreliability). Since LCA deals with the analysis of space vehicle system conceptual designs, it is imperative to stress that the goal of LCA is not to arrive at the answer but, rather, to provide important inputs to a broader strategic planning process, allowing the managers to make risk-informed decisions, and increase the likelihood of meeting mission success criteria.

Application of quality improvement analytic methodology in emergency medicine research: A comparative evaluation.

PubMed

Harries, Bruce; Filiatrault, Lyne; Abu-Laban, Riyad B

2018-05-30

Quality improvement (QI) analytic methodology is rarely encountered in the emergency medicine literature. We sought to comparatively apply QI design and analysis techniques to an existing data set, and discuss these techniques as an alternative to standard research methodology for evaluating a change in a process of care. We used data from a previously published randomized controlled trial on triage-nurse initiated radiography using the Ottawa ankle rules (OAR). QI analytic tools were applied to the data set from this study and evaluated comparatively against the original standard research methodology. The original study concluded that triage nurse-initiated radiographs led to a statistically significant decrease in mean emergency department length of stay. Using QI analytic methodology, we applied control charts and interpreted the results using established methods that preserved the time sequence of the data. This analysis found a compelling signal of a positive treatment effect that would have been identified after the enrolment of 58% of the original study sample, and in the 6th month of this 11-month study. Our comparative analysis demonstrates some of the potential benefits of QI analytic methodology. We found that had this approach been used in the original study, insights regarding the benefits of nurse-initiated radiography using the OAR would have been achieved earlier, and thus potentially at a lower cost. In situations where the overarching aim is to accelerate implementation of practice improvement to benefit future patients, we believe that increased consideration should be given to the use of QI analytic methodology.

Health economic evaluations comparing insulin glargine with NPH insulin in patients with type 1 diabetes: a systematic review

PubMed Central

2011-01-01

Background Compared to conventional human basal insulin (neutral protamine Hagedorn; NPH) the long-acting analogue insulin glargine (GLA) is associated with a number of advantages regarding metabolic control, hypoglycaemic events and convenience. However, the unit costs of GLA exceed those of NPH. This study aims to systematically review the economic evidence comparing GLA with NPH in basal-bolus treatment (intensified conventional therapy; ICT) of type 1 diabetes in order to facilitate informed decision making in clinical practice and health policy. Methods A systematic literature search was performed for the period of January 1st 2000 to December 1st 2009 via Embase, Medline, the Cochrane Library, the databases GMS (German Medical Science) and DAHTA (Deutsche Agentur für Health Technology Assessment), and the abstract books of relevant international scientific congresses. Retrieved studies were reviewed based on predefined inclusion criteria, methodological and quality aspects. In order to allow comparison between studies, currencies were converted using purchasing power parities (PPP). Results A total of 7 health economic evaluations from 4 different countries fulfilled the predefined criteria: 6 modelling studies, all of them cost-utility analyses, and one claims data analysis with a cost-minimisation design. One cost-utility analysis showed dominance of GLA over NPH. The other 5 cost-utility analyses resulted in additional costs per quality adjusted life year (QALY) gained for GLA, ranging from € 3,859 to € 57,002 (incremental cost effectiveness ratio; ICER). The cost-minimisation analysis revealed lower annual diabetes-specific costs in favour of NPH from the perspective of the German Statutory Health Insurance (SHI). Conclusions The incremental cost-utility-ratios (ICER) show favourable values for GLA with considerable variation. If a willingness-to-pay threshold of £ 30,000 (National Institute of Clinical Excellence, UK) is adopted, GLA is cost-effective in 4 of 6 cost utility analyses (CUA) included. Thus insulin glargine (GLA) seems to offer good value for money. Comparability between studies is limited because of methodological and country specific aspects. The results of this review underline that evaluation of insulin therapy should use evidence on efficacy of therapy from information synthesis. The concept of relating utility decrements to fear of hypoglycaemia is a plausible approach but needs further investigation. Also future evaluations of basal-bolus insulin therapy should include costs of consumables such as needles for insulin injection as well as test strips and lancets for blood glucose self monitoring. PMID:21978524

Aeroelastic optimization methodology for viscous and turbulent flows

NASA Astrophysics Data System (ADS)

Barcelos Junior, Manuel Nascimento Dias

2007-12-01

In recent years, the development of faster computers and parallel processing allowed the application of high-fidelity analysis methods to the aeroelastic design of aircraft. However, these methods are restricted to the final design verification, mainly due to the computational cost involved in iterative design processes. Therefore, this work is concerned with the creation of a robust and efficient aeroelastic optimization methodology for inviscid, viscous and turbulent flows by using high-fidelity analysis and sensitivity analysis techniques. Most of the research in aeroelastic optimization, for practical reasons, treat the aeroelastic system as a quasi-static inviscid problem. In this work, as a first step toward the creation of a more complete aeroelastic optimization methodology for realistic problems, an analytical sensitivity computation technique was developed and tested for quasi-static aeroelastic viscous and turbulent flow configurations. Viscous and turbulent effects are included by using an averaged discretization of the Navier-Stokes equations, coupled with an eddy viscosity turbulence model. For quasi-static aeroelastic problems, the traditional staggered solution strategy has unsatisfactory performance when applied to cases where there is a strong fluid-structure coupling. Consequently, this work also proposes a solution methodology for aeroelastic and sensitivity analyses of quasi-static problems, which is based on the fixed point of an iterative nonlinear block Gauss-Seidel scheme. The methodology can also be interpreted as the solution of the Schur complement of the aeroelastic and sensitivity analyses linearized systems of equations. The methodologies developed in this work are tested and verified by using realistic aeroelastic systems.

Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics.

PubMed

Patrizi, Alfredo; Pennestrì, Ettore; Valentini, Pier Paolo

2016-01-01

The paper deals with the comparison between a high-end marker-based acquisition system and a low-cost marker-less methodology for the assessment of the human posture during working tasks. The low-cost methodology is based on the use of a single Microsoft Kinect V1 device. The high-end acquisition system is the BTS SMART that requires the use of reflective markers to be placed on the subject's body. Three practical working activities involving object lifting and displacement have been investigated. The operational risk has been evaluated according to the lifting equation proposed by the American National Institute for Occupational Safety and Health. The results of the study show that the risk multipliers computed from the two acquisition methodologies are very close for all the analysed activities. In agreement to this outcome, the marker-less methodology based on the Microsoft Kinect V1 device seems very promising to promote the dissemination of computer-aided assessment of ergonomics while maintaining good accuracy and affordable costs. PRACTITIONER’S SUMMARY: The study is motivated by the increasing interest for on-site working ergonomics assessment. We compared a low-cost marker-less methodology with a high-end marker-based system. We tested them on three different working tasks, assessing the working risk of lifting loads. The two methodologies showed comparable precision in all the investigations.

Development of regional stump-to-mill logging cost estimators

Treesearch

Chris B. LeDoux; John E. Baumgras

1989-01-01

Planning logging operations requires estimating the logging costs for the sale or tract being harvested. Decisions need to be made on equipment selection and its application to terrain. In this paper a methodology is described that has been developed and implemented to solve the problem of accurately estimating logging costs by region. The methodology blends field time...

A Mathematical Model for Allocation of School Resources to Optimize a Selected Output.

ERIC Educational Resources Information Center

McAfee, Jackson K.

The methodology of costing an education program by identifying the resources it utilizes places all costs within the framework of staff, equipment, materials, facilities, and services. This paper suggests that this methodology is much stronger than the more traditional budgetary and cost per pupil approach. The techniques of data collection are…

Spatial modeling of potential woody biomass flow

Treesearch

Woodam Chung; Nathaniel Anderson

2012-01-01

The flow of woody biomass to end users is determined by economic factors, especially the amount available across a landscape and delivery costs of bioenergy facilities. The objective of this study develop methodology to quantify landscape-level stocks and potential biomass flows using the currently available spatial database road network analysis tool. We applied this...

RENP Replication Unlikely Without Federal Support. Technical Appendices Supporting RMC Report UR 327.

ERIC Educational Resources Information Center

Errecart, Michael T.

The Response to Educational Needs Project (RENP) focuses on training teachers as a vehicle for promoting student achievement in a compensatory education program. This document supplements a report on RENP replication and provides information on cost analysis, methodology, and sample and data collection. In Appendix A the following questions are…

Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

PubMed

Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

2015-02-28

The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Human Reliability and the Cost of Doing Business

NASA Technical Reports Server (NTRS)

DeMott, Diana

2014-01-01

Most businesses recognize that people will make mistakes and assume errors are just part of the cost of doing business, but does it need to be? Companies with high risk, or major consequences, should consider the effect of human error. In a variety of industries, Human Errors have caused costly failures and workplace injuries. These have included: airline mishaps, medical malpractice, administration of medication and major oil spills have all been blamed on human error. A technique to mitigate or even eliminate some of these costly human errors is the use of Human Reliability Analysis (HRA). Various methodologies are available to perform Human Reliability Assessments that range from identifying the most likely areas for concern to detailed assessments with human error failure probabilities calculated. Which methodology to use would be based on a variety of factors that would include: 1) how people react and act in different industries, and differing expectations based on industries standards, 2) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 3) type and availability of data and 4) how the industry views risk & reliability influences ( types of emergencies, contingencies and routine tasks versus cost based concerns). The Human Reliability Assessments should be the first step to reduce, mitigate or eliminate the costly mistakes or catastrophic failures. Using Human Reliability techniques to identify and classify human error risks allows a company more opportunities to mitigate or eliminate these risks and prevent costly failures.

Overview of causes and costs of injuries in Massachusetts: a methodology for analysis of state data.

PubMed Central

Schuster, M; Cohen, B B; Rodgers, C G; Walker, D K; Friedman, D J; Ozonoff, V V

1995-01-01

Massachusetts has developed the first State profile of the causes and costs of injury based on the national study, "Cost of Injury in the United States: A Report to Congress." Incidence of fatal injuries is based on Massachusetts data; nonfatal hospitalized injuries, on Massachusetts age and sex rates and U.S. cause data; and nonhospitalized injuries, on U.S. rates applied to Massachusetts census data. Lifetime costs per injured person are based on national data adjusted for higher personal health care expenditures and for higher mean annual earnings in Massachusetts. The estimated total lifetime cost for the 1.4 million injuries that occurred in 1989 is $4.4 billion--$1.7 billion for health care and $2.7 billion for lost earnings. Injuries attributed to motor vehicles and falls account for more than half of the total cost. The other cause categories are poisonings, fire-burns, firearms, drowings-near drownings, and other. For every person who dies from an injury, 17 people are hospitalized, and an estimated 535 people require outpatient treatment, consultation, or restricted activity. Development of a State-based cost report can be useful in monitoring the contribution of injuries to health status and in planning effective injury prevention strategies in a community-based health care system. The methodology described in this paper can be replicated by other States through accessing their State-specific mortality and hospital discharge data bases. PMID:7610211

Light Water Reactor Sustainability Program: Digital Technology Business Case Methodology Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken; Lawrie, Sean; Hart, Adam

The Department of Energy’s (DOE’s) Light Water Reactor Sustainability Program aims to develop and deploy technologies that will make the existing U.S. nuclear fleet more efficient and competitive. The program has developed a standard methodology for determining the impact of new technologies in order to assist nuclear power plant (NPP) operators in building sound business cases. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway is part of the DOE’s Light Water Reactor Sustainability (LWRS) Program. It conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systemsmore » of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals: (1) to ensure that legacy analog II&C systems are not life-limiting issues for the LWR fleet and (2) to implement digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Resolving long-term operational concerns with the II&C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation’s energy and environmental security. The II&C Pathway is conducting a series of pilot projects that enable the development and deployment of new II&C technologies in existing nuclear plants. Through the LWRS program, individual utilities and plants are able to participate in these projects or otherwise leverage the results of projects conducted at demonstration plants. Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) addresses the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the "benefits" side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology.« less

Asbestos Utilization Costs on the Example of Functioning Landfill of Hazardous Waste

NASA Astrophysics Data System (ADS)

Polek, Daria

2017-12-01

Asbestos is a trademark of mineral fibres, which are the natural minerals found in nature. Products containing asbestos fibres, in accordance with the national and EU legislation, are covered by the production prohibition and forced to be removed. In Poland, the asbestos removal process started with the adaptation of the EU law by the Council of Ministers Treatment Program of the National Asbestos for the years 2009-2032. The purpose of the dissertation was to analyse the costs associated with the disposal of the costs of collection, transport and disposal of waste. Methodology consisted in obtaining information on the raw materials needed to produce asbestos sheets. The analysis allowed us to determine the asbestos removal cost and include state subsidies in the calculations.

A methodology for the evaluation of program cost and schedule risk for the SEASAT program

NASA Technical Reports Server (NTRS)

Abram, P.; Myers, D.

1976-01-01

An interactive computerized project management software package (RISKNET) is designed to analyze the effect of the risk involved in each specific activity on the results of the total SEASAT-A program. Both the time and the cost of each distinct activity can be modeled with an uncertainty interval so as to provide the project manager with not only the expected time and cost for the completion of the total program, but also with the expected range of costs corresponding to any desired level of significance. The nature of the SEASAT-A program is described. The capabilities of RISKNET and the implementation plan of a RISKNET analysis for the development of SEASAT-A are presented.

Direct, indirect and intangible costs of acute hand and wrist injuries: A systematic review.

PubMed

Robinson, Luke Steven; Sarkies, Mitchell; Brown, Ted; O'Brien, Lisa

2016-12-01

Injuries sustained to the hand and wrist are common, accounting for 20% of all emergency presentations. The economic burden of these injuries, comprised of direct (medical expenses incurred), indirect (value of lost productivity) and intangible costs, can be extensive and rise sharply with the increase of severity. This paper systematically reviews cost-of-illness studies and health economic evaluations of acute hand and wrist injuries with a particular focus on direct, indirect and intangible costs. It aims to provide economic cost estimates of burden and discuss the cost components used in international literature. A search of cost-of-illness studies and health economic evaluations of acute hand and wrist injuries in various databases was conducted. Data extracted for each included study were: design, population, intervention, and estimates and measurement methodologies of direct, indirect and intangible costs. Reported costs were converted into US-dollars using historical exchange rates and then adjusted into 2015 US-dollars using an inflation calculator RESULTS: The search yielded 764 studies, of which 21 met the inclusion criteria. Twelve studies were cost-of-illness studies, and seven were health economic evaluations. The methodology used to derive direct, indirect and intangible costs differed markedly across all studies. Indirect costs represented a large portion of total cost in both cost-of-illness studies [64.5% (IQR 50.75-88.25)] and health economic evaluations [68% (IQR 49.25-73.5)]. The median total cost per case of all injury types was US$6951 (IQR $3357-$22,274) for cost-of-illness studies and US$8297 (IQR $3858-$33,939) for health economic evaluations. Few studies reported intangible cost data associated with acute hand and wrist injuries. Several studies have attempted to estimate the direct, indirect and intangible costs associated with acute hand and wrist injuries in various countries using heterogeneous methodologies. Estimates of the economic costs of different acute hand and wrist injuries varied greatly depending on the study methodology, however, by any standards, these injuries should be considered a substantial burden on the individual and society. Further research using standardised methodologies could provide guidance to relevant policy makers on how to best distribute limited resources by identifying the major disorders and exposures resulting in the largest burden. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using Videos Derived from Simulations to Support the Analysis of Spatial Awareness in Synthetic Vision Displays

NASA Technical Reports Server (NTRS)

Boton, Matthew L.; Bass, Ellen J.; Comstock, James R., Jr.

2006-01-01

The evaluation of human-centered systems can be performed using a variety of different methodologies. This paper describes a human-centered systems evaluation methodology where participants watch 5-second non-interactive videos of a system in operation before supplying judgments and subjective measures based on the information conveyed in the videos. This methodology was used to evaluate the ability of different textures and fields of view to convey spatial awareness in synthetic vision systems (SVS) displays. It produced significant results for both judgment based and subjective measures. This method is compared to other methods commonly used to evaluate SVS displays based on cost, the amount of experimental time required, experimental flexibility, and the type of data provided.

Design optimization of aircraft landing gear assembly under dynamic loading

NASA Astrophysics Data System (ADS)

Wong, Jonathan Y. B.

As development cycles and prototyping iterations begin to decrease in the aerospace industry, it is important to develop and improve practical methodologies to meet all design metrics. This research presents an efficient methodology that applies high-fidelity multi-disciplinary design optimization techniques to commercial landing gear assemblies, for weight reduction, cost savings, and structural performance dynamic loading. Specifically, a slave link subassembly was selected as the candidate to explore the feasibility of this methodology. The design optimization process utilized in this research was sectioned into three main stages: setup, optimization, and redesign. The first stage involved the creation and characterization of the models used throughout this research. The slave link assembly was modelled with a simplified landing gear test, replicating the behavior of the physical system. Through extensive review of the literature and collaboration with Safran Landing Systems, dynamic and structural behavior for the system were characterized and defined mathematically. Once defined, the characterized behaviors for the slave link assembly were then used to conduct a Multi-Body Dynamic (MBD) analysis to determine the dynamic and structural response of the system. These responses were then utilized in a topology optimization through the use of the Equivalent Static Load Method (ESLM). The results of the optimization were interpreted and later used to generate improved designs in terms of weight, cost, and structural performance under dynamic loading in stage three. The optimized designs were then validated using the model created for the MBD analysis of the baseline design. The design generation process employed two different approaches for post-processing the topology results produced. The first approach implemented a close replication of the topology results, resulting in a design with an overall peak stress increase of 74%, weight savings of 67%, and no apparent cost savings due to complex features present in the design. The second design approach focused on realizing reciprocating benefits for cost and weight savings. As a result, this design was able to achieve an overall peak stress increase of 6%, weight and cost savings of 36%, and 60%, respectively.

[Methodologies for estimating the indirect costs of traffic accidents].

PubMed

Carozzi, Soledad; Elorza, María Eugenia; Moscoso, Nebel Silvana; Ripari, Nadia Vanina

2017-01-01

Traffic accidents generate multiple costs to society, including those associated with the loss of productivity. However, there is no consensus about the most appropriate methodology for estimating those costs. The aim of this study was to review methods for estimating indirect costs applied in crash cost studies. A thematic review of the literature was carried out between 1995 and 2012 in PubMed with the terms cost of illness, indirect cost, road traffic injuries, productivity loss. For the assessment of costs we used the the human capital method, on the basis of the wage-income lost during the time of treatment and recovery of patients and caregivers. In the case of premature death or total disability, the discount rate was applied to obtain the present value of lost future earnings. The computed years arose by subtracting to life expectancy at birth the average age of those affected who are not incorporated into the economically active life. The interest in minimizing the problem is reflected in the evolution of the implemented methodologies. We expect that this review is useful to estimate efficiently the real indirect costs of traffic accidents.

Development and Implications of a Predictive Cost Methodology for Modular Pumped Storage Hydropower (m-PSH) Projects in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witt, Adam; Chalise, Dol Raj; Hadjerioua, Boualem

The slow pace of Pumped Storage Hydropower development in the US over the past twenty years has led to widespread interest in the feasibility and viability of alternative PSH designs, development schemes, and technologies. Since 2011, Oak Ridge National Lab has been exploring the economic viability of modular Pumped Storage Hydropower (m-PSH) development through targeted case studies, revenue simulations, and analysis of innovative configurations and designs. This paper outlines the development and supporting analysis of a scalable, comprehensive cost modeling tool designed to simulate the initial capital costs for a variety of potential m-PSH projects and deployment scenarios. The toolmore » is used to explore and determine innovative research strategies that can improve the economic viability of m-PSH in US markets.« less

High Energy Laser Technology Assessment: Volume 1. The Technology Assessment: An Initial Study

DTIC Science & Technology

1975-01-01

technically feasible and economically cost effective Such an analysis is beyord the capability of this exploratory study Therefore, to proceed with... Analysis R&D Management fffft jygJfQ JQ Q^^ 20 ABSTRACT fConllnu* im r«»«ra« •!«#• II ifcmmnmrr mt4 Idtmllty hf Heck A technology assessment ha...by an abreviated impact analysis whose intent is to be illustrative of the methodology, rather than be a comprehensive treatment of the subject. 00

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekmekcioglu, Mehmet, E-mail: meceng3584@yahoo.co; Kaya, Tolga; Kahraman, Cengiz

The use of fuzzy multiple criteria analysis (MCA) in solid waste management has the advantage of rendering subjective and implicit decision making more objective and analytical, with its ability to accommodate both quantitative and qualitative data. In this paper a modified fuzzy TOPSIS methodology is proposed for the selection of appropriate disposal method and site for municipal solid waste (MSW). Our method is superior to existing methods since it has capability of representing vague qualitative data and presenting all possible results with different degrees of membership. In the first stage of the proposed methodology, a set of criteria of cost,more » reliability, feasibility, pollution and emission levels, waste and energy recovery is optimized to determine the best MSW disposal method. Landfilling, composting, conventional incineration, and refuse-derived fuel (RDF) combustion are the alternatives considered. The weights of the selection criteria are determined by fuzzy pairwise comparison matrices of Analytic Hierarchy Process (AHP). It is found that RDF combustion is the best disposal method alternative for Istanbul. In the second stage, the same methodology is used to determine the optimum RDF combustion plant location using adjacent land use, climate, road access and cost as the criteria. The results of this study illustrate the importance of the weights on the various factors in deciding the optimized location, with the best site located in Catalca. A sensitivity analysis is also conducted to monitor how sensitive our model is to changes in the various criteria weights.« less

Integrative treatment for low back pain: An exploratory systematic review and meta-analysis of randomized controlled trials.

PubMed

Hu, Xiao-Yang; Chen, Ni-Ni; Chai, Qian-Yun; Yang, Guo-Yan; Trevelyan, Esmé; Lorenc, Ava; Liu, Jian-Ping; Robinson, Nicola

2015-10-26

Low back pain (LBP) is a common musculoskeletal condition often treated using integrative medicine (IM). Most reviews have focused on a single complementary and alternative medicine (CAM) therapy for LBP rather than evaluating wider integrative approaches. This exploratory systematic review aimed to identify randomized controlled trials (RCTs) and provide evidence on the effectiveness, cost effectiveness and adverse effects of integrative treatment for LBP. A literature search was conducted in 12 English and Chinese databases. RCTs evaluating an integrative treatment for musculoskeletal related LBP were included. Reporting, methodological quality and relevant clinical characteristics were assessed and appraised. Metaanalyses were performed for outcomes where trials were sufficiently homogenous. Fifty-six RCTs were identified evaluating integrative treatment for LBP. Although reporting and methodological qualities were poor, meta-analysis showed a favourable effect for integrative treatment over conventional and CAM treatment for back pain and function at 3 months or less follow-up. Two trials investigated costs, reporting £ 5332 per quality adjusted life years with 6 Alexander technique lessons plus exercise at 12 months follow-up; and an increased total costs of $244 when giving an additional up to 15 sessions of CAM package of care at 12 weeks. Sixteen trials mentioned safety; no severe adverse effects were reported. Integrative treatment that combines CAM with conventional therapies appeared to have beneficial effects on pain and function. However, evidence is limited due to heterogeneity, the relatively small numbers available for subgroup analyses and the low methodological quality of the included trials. Identification of studies of true IM was not possible due to lack of reporting of the intervention details (registration No. CRD42013003916).

Cost analysis of the surgical treatment of fractures of the proximal humerus: an evaluation of the determinants of cost and comparison of the institutional cost of treatment with the national tariff.

PubMed

Sabharwal, S; Carter, A W; Rashid, A; Darzi, A; Reilly, P; Gupte, C M

2016-02-01

The aims of this study were to estimate the cost of surgical treatment of fractures of the proximal humerus using a micro-costing methodology, contrast this cost with the national reimbursement tariff and establish the major determinants of cost. A detailed inpatient treatment pathway was constructed using semi-structured interviews with 32 members of hospital staff. Its content validity was established through a Delphi panel evaluation. Costs were calculated using time-driven activity-based costing (TDABC) and sensitivity analysis was performed to evaluate the determinants of cost The mean cost of the different surgical treatments was estimated to be £3282. Although this represented a profit of £1138 against the national tariff, hemiarthroplasty as a treatment choice resulted in a net loss of £952. Choice of implant and theatre staffing were the largest cost drivers. Operating theatre delays of more than one hour resulted in a loss of income Our findings indicate that the national tariff does not accurately represent the cost of treatment for this condition. Effective use of the operating theatre and implant discounting are likely to be more effective cost containment approaches than control of bed-day costs. This cost analysis of fractures of the proximal humerus reinforces the limitations of the national tariff within the English National Health Service, and underlines the importance of effective use of the operating theatre, as well as appropriate implant procurement where controlling costs of treatment is concerned. ©2016 The British Editorial Society of Bone & Joint Surgery.

An effective and optimal quality control approach for green energy manufacturing using design of experiments framework and evolutionary algorithm

NASA Astrophysics Data System (ADS)

Saavedra, Juan Alejandro

Quality Control (QC) and Quality Assurance (QA) strategies vary significantly across industries in the manufacturing sector depending on the product being built. Such strategies range from simple statistical analysis and process controls, decision-making process of reworking, repairing, or scraping defective product. This study proposes an optimal QC methodology in order to include rework stations during the manufacturing process by identifying the amount and location of these workstations. The factors that are considered to optimize these stations are cost, cycle time, reworkability and rework benefit. The goal is to minimize the cost and cycle time of the process, but increase the reworkability and rework benefit. The specific objectives of this study are: (1) to propose a cost estimation model that includes energy consumption, and (2) to propose an optimal QC methodology to identify quantity and location of rework workstations. The cost estimation model includes energy consumption as part of the product direct cost. The cost estimation model developed allows the user to calculate product direct cost as the quality sigma level of the process changes. This provides a benefit because a complete cost estimation calculation does not need to be performed every time the processes yield changes. This cost estimation model is then used for the QC strategy optimization process. In order to propose a methodology that provides an optimal QC strategy, the possible factors that affect QC were evaluated. A screening Design of Experiments (DOE) was performed on seven initial factors and identified 3 significant factors. It reflected that one response variable was not required for the optimization process. A full factorial DOE was estimated in order to verify the significant factors obtained previously. The QC strategy optimization is performed through a Genetic Algorithm (GA) which allows the evaluation of several solutions in order to obtain feasible optimal solutions. The GA evaluates possible solutions based on cost, cycle time, reworkability and rework benefit. Finally it provides several possible solutions because this is a multi-objective optimization problem. The solutions are presented as chromosomes that clearly state the amount and location of the rework stations. The user analyzes these solutions in order to select one by deciding which of the four factors considered is most important depending on the product being manufactured or the company's objective. The major contribution of this study is to provide the user with a methodology used to identify an effective and optimal QC strategy that incorporates the number and location of rework substations in order to minimize direct product cost, and cycle time, and maximize reworkability, and rework benefit.

Measuring costs of alcohol harm to others: a review of the literature.

PubMed

Navarro, Héctor José; Doran, Christopher M; Shakeshaft, Anthony P

2011-04-01

People other than the drinker experience harmful consequences from alcohol misuse, accounting for part of the economic burden to society. Little has been done on costing harm to others. A literature review was undertaken of various databases, government publications, dissertations, conference papers and reference materials. Publications were included for analysis if they reported costs on alcohol harm to others. Methodological adequacy of costing studies was assessed using a checklist modified from the Drummond 10-point checklist. In total, 25 publications including costs on alcohol harm to others were reviewed. Fetal alcohol syndrome (FAS) was the harm to others most frequently cost. The cost-of-illness (COI) framework was used in 24 of the publications, while 1 employed a cost-benefit analysis (CBA) serving as starting point for further studies estimating intangible costs (e.g. victim's quality-of-life (QoL) loss). Indirect costs (e.g. victim's lost productivity) were quantified most frequently with the human capital approach. The majority of publications critically assessed on costing received an average quality score (17/25). Few studies have reported costs on the magnitude from harm to people other than the drinker, therefore the overall economic burden of risky alcohol consumption across countries is underestimated. This review may be considered a starting point for future research on costing alcohol harm to others. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

49 CFR 1109.4 - Mandatory mediation in rate cases to be considered under the stand-alone cost methodology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Mandatory mediation in rate cases to be considered... § 1109.4 Mandatory mediation in rate cases to be considered under the stand-alone cost methodology. (a) A... methodology must engage in non-binding mediation of its dispute with the railroad upon filing a formal...

Orthopaedic trauma care in Haiti: a cost-effectiveness analysis of an innovative surgical residency program.

PubMed

Carlson, Lucas C; Slobogean, Gerard P; Pollak, Andrew N

2012-01-01

In an effort to sustainably strengthen orthopaedic trauma care in Haiti, a 2-year Orthopaedic Trauma Care Specialist (OTCS) program for Haitian physicians has been developed. The program will provide focused training in orthopaedic trauma surgery and fracture care utilizing a train-the-trainer approach. The purpose of this analysis was to calculate the cost-effectiveness of the program relative to its potential to decrease disability in the Haitian population. Using established methodology originally outlined in the World Health Organization's Global Burden of Disease project, a cost-effectiveness analysis was performed for the OTCS program in Haiti. Costs and disability-adjusted life-years (DALYs) averted were estimated per fellow trained in the OTCS program by using a 20-year career time horizon. Probabilistic sensitivity analysis was used to simultaneously test the joint uncertainty of the cost and averted DALY estimates. A willingness-to-pay threshold of $1200 per DALY averted, equal to the gross domestic product per capita in Haiti, was selected on the basis of World Health Organization's definition of highly cost-effective health interventions. The OTCS program results in an incremental cost of $1,542,544 ± $109,134 and 12,213 ± 2,983 DALYs averted per fellow trained. The cost-effectiveness ratio of $133.97 ± $34.71 per DALY averted is well below the threshold of $1200 per DALY averted. Furthermore, sensitivity analysis suggests that implementing the OTCS program is the economically preferred strategy with more than 95% probability at a willingness-to-pay threshold of $200 per DALY averted and across the entire range of potential variable inputs. The current economic analysis suggests the OTCS program to be a highly cost-effective intervention. Probabilistic sensitivity analysis demonstrates that the conclusions remain stable even when considering the joint uncertainty of the cost and DALY estimates. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Wastewater Treatment Costs and Outlays in Organic Petrochemicals: Standards Versus Taxes With Methodology Suggestions for Marginal Cost Pricing and Analysis

NASA Astrophysics Data System (ADS)

Thompson, Russell G.; Singleton, F. D., Jr.

1986-04-01

With the methodology recommended by Baumol and Oates, comparable estimates of wastewater treatment costs and industry outlays are developed for effluent standard and effluent tax instruments for pollution abatement in five hypothetical organic petrochemicals (olefins) plants. The computational method uses a nonlinear simulation model for wastewater treatment to estimate the system state inputs for linear programming cost estimation, following a practice developed in a National Science Foundation (Research Applied to National Needs) study at the University of Houston and used to estimate Houston Ship Channel pollution abatement costs for the National Commission on Water Quality. Focusing on best practical and best available technology standards, with effluent taxes adjusted to give nearly equal pollution discharges, shows that average daily treatment costs (and the confidence intervals for treatment cost) would always be less for the effluent tax than for the effluent standard approach. However, industry's total outlay for these treatment costs, plus effluent taxes, would always be greater for the effluent tax approach than the total treatment costs would be for the effluent standard approach. Thus the practical necessity of showing smaller outlays as a prerequisite for a policy change toward efficiency dictates the need to link the economics at the microlevel with that at the macrolevel. Aggregation of the plants into a programming modeling basis for individual sectors and for the economy would provide a sound basis for effective policy reform, because the opportunity costs of the salient regulatory policies would be captured. Then, the government's policymakers would have the informational insights necessary to legislate more efficient environmental policies in light of the wealth distribution effects.

Health economic controversy and cost-effectiveness of proton therapy.

PubMed

Lievens, Yolande; Pijls-Johannesma, Madelon

2013-04-01

Owing to increasing healthcare costs, there is a need to examine whether the benefits of new technologies are worth the extra cost. In proton therapy, where the evidence in favor is limited, it is heavily debated whether the expected benefit justifies the higher capital and operating costs. The aim of this article was to explore the existing methodologies of economic evaluations (EEs) of particle therapy and recommend an approach for future data collection and analysis. We reviewed the published literature on health economics of proton therapy using accepted guidelines on performing EE. Different cost strategies were assessed and comparisons with other treatment modalities were made in terms of cost-effectiveness. Potential bias in the existing studies was identified and new methodologies proposed. The principal cause of bias in EEs of proton therapy is the lack of valid data on effects as well as costs. The introduction of proton therapy may be seriously hampered by the lack of outcome and cost data and the situation is likely to continue not only in terms of justifying the capital investment but also covering the operational costs. We identified an urgent need to collect appropriate data to allow for reimbursement of such novel technology. In the absence of level 1 evidence, well-performed modeling studies taking into account the available cost and outcome parameters, including the current uncertainties, can help to address the problem of limited outcome and health economic data. The approach of coverage with evidence development, in which evidence is collected in an ongoing manner in population-based registries along with dedicated financing, may allow technological advances with limited initial evidence of benefit and value, such as protons, to become available to patients in an early phase of their technology life cycle. Copyright © 2013 Elsevier Inc. All rights reserved.

A Simple and Reliable Method of Design for Standalone Photovoltaic Systems

NASA Astrophysics Data System (ADS)

Srinivasarao, Mantri; Sudha, K. Rama; Bhanu, C. V. K.

2017-06-01

Standalone photovoltaic (SAPV) systems are seen as a promoting method of electrifying areas of developing world that lack power grid infrastructure. Proliferations of these systems require a design procedure that is simple, reliable and exhibit good performance over its life time. The proposed methodology uses simple empirical formulae and easily available parameters to design SAPV systems, that is, array size with energy storage. After arriving at the different array size (area), performance curves are obtained for optimal design of SAPV system with high amount of reliability in terms of autonomy at a specified value of loss of load probability (LOLP). Based on the array to load ratio (ALR) and levelized energy cost (LEC) through life cycle cost (LCC) analysis, it is shown that the proposed methodology gives better performance, requires simple data and is more reliable when compared with conventional design using monthly average daily load and insolation.

Cost-effective broad-band electrical impedance spectroscopy measurement circuit and signal analysis for piezo-materials and ultrasound transducers

PubMed Central

Lewis, George K; Lewis, George K; Olbricht, William

2008-01-01

This paper explains the circuitry and signal processing to perform electrical impedance spectroscopy on piezoelectric materials and ultrasound transducers. Here, we measure and compare the impedance spectra of 2−5 MHz piezoelectrics, but the methodology applies for 700 kHz–20 MHz ultrasonic devices as well. Using a 12 ns wide 5 volt pulsing circuit as an impulse, we determine the electrical impedance curves experimentally using Ohm's law and fast Fourier transform (FFT), and compare results with mathematical models. The method allows for rapid impedance measurement for a range of frequencies using a narrow input pulse, digital oscilloscope and FFT techniques. The technique compares well to current methodologies such as network and impedance analyzers while providing additional versatility in the electrical impedance measurement. The technique is theoretically simple, easy to implement and completed with ordinary laboratory instrumentation for minimal cost. PMID:19081773

Supply chain optimization for pediatric perioperative departments.

PubMed

Davis, Janice L; Doyle, Robert

2011-09-01

Economic challenges compel pediatric perioperative departments to reduce nonlabor supply costs while maintaining the quality of patient care. Optimization of the supply chain introduces a framework for decision making that drives fiscally responsible decisions. The cost-effective supply chain is driven by implementing a value analysis process for product selection, being mindful of product sourcing decisions to reduce supply expense, creating logistical efficiency that will eliminate redundant processes, and managing inventory to ensure product availability. The value analysis approach is an analytical methodology for product selection that involves product evaluation and recommendation based on consideration of clinical benefit, overall financial impact, and revenue implications. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Investigation of the impact of low cost traffic engineering measures on road safety in urban areas.

PubMed

Yannis, George; Kondyli, Alexandra; Georgopoulou, Xenia

2014-01-01

This paper investigates the impact of low cost traffic engineering measures (LCTEMs) on the improvement of road safety in urban areas. A number of such measures were considered, such as speed humps, woonerfs, raised intersections and other traffic calming measures, which have been implemented on one-way, one-lane roads in the Municipality of Neo Psychiko in the Greater Athens Area. Data were analysed using the before-and-after safety analysis methodology with large control group. The selected control group comprised of two Municipalities in the Athens Greater Area, which present similar road network and land use characteristics with the area considered. The application of the methodology showed that the total number of crashes presented a statistically significant reduction, which can be possibly attributed to the introduction of LCTEMs. This reduction concerns passenger cars and single-vehicle crashes and is possibly due to the behavioural improvement of drivers of 25 years old or more. The results of this research are very useful for the identification of the appropriate low cost traffic engineering countermeasures for road safety problems in urban areas.

Benefit-cost methodology study with example application of the use of wind generators

NASA Technical Reports Server (NTRS)

Zimmer, R. P.; Justus, C. G.; Mason, R. M.; Robinette, S. L.; Sassone, P. G.; Schaffer, W. A.

1975-01-01

An example application for cost-benefit methodology is presented for the use of wind generators. The approach adopted for the example application consisted of the following activities: (1) surveying of the available wind data and wind power system information, (2) developing models which quantitatively described wind distributions, wind power systems, and cost-benefit differences between conventional systems and wind power systems, and (3) applying the cost-benefit methodology to compare a conventional electrical energy generation system with systems which included wind power generators. Wind speed distribution data were obtained from sites throughout the contiguous United States and were used to compute plant factor contours shown on an annual and seasonal basis. Plant factor values (ratio of average output power to rated power) are found to be as high as 0.6 (on an annual average basis) in portions of the central U. S. and in sections of the New England coastal area. Two types of wind power systems were selected for the application of the cost-benefit methodology. A cost-benefit model was designed and implemented on a computer to establish a practical tool for studying the relative costs and benefits of wind power systems under a variety of conditions and to efficiently and effectively perform associated sensitivity analyses.

Recommendations for reporting economic evaluations of haemophilia prophylaxis: a nominal groups consensus statement on behalf of the Economics Expert Working Group of The International Prophylaxis Study Group.

PubMed

Nicholson, A; Berger, K; Bohn, R; Carcao, M; Fischer, K; Gringeri, A; Hoots, K; Mantovani, L; Schramm, W; van Hout, B A; Willan, A R; Feldman, B M

2008-01-01

The need for clearly reported studies evaluating the cost of prophylaxis and its overall outcomes has been recommended from previous literature. To establish minimal ''core standards'' that can be followed when conducting and reporting economic evaluations of hemophilia prophylaxis. Ten members of the IPSG Economic Analysis Working Group participated in a consensus process using the Nominal Groups Technique (NGT). The following topics relating to the economic analysis of prophylaxis studies were addressed; Whose perspective should be taken? Which is the best methodological approach? Is micro- or macro-costing the best costing strategy? What information must be presented about costs and outcomes in order to facilitate local and international interpretation? The group suggests studies on the economic impact of prophylaxis should be viewed from a societal perspective and be reported using a Cost Utility Analysis (CUA) (with consideration of also reporting Cost Benefit Analysis [CBA]). All costs that exceed $500 should be used to measure the costs of prophylaxis (macro strategy) including items such as clotting factor costs, hospitalizations, surgical procedures, productivity loss and number of days lost from school or work. Generic and disease specific quality of lífe and utility measures should be used to report the outcomes of the study. The IPSG has suggested minimal core standards to be applied to the reporting of economic evaluations of hemophilia prophylaxis. Standardized reporting will facilitate the comparison of studies and will allow for more rational policy decisions and treatment choices.

Sensitivity analysis of navy aviation readiness based sparing model

DTIC Science & Technology

2017-09-01

variability. (See Figure 4.) Figure 4. Research design flowchart 18 Figure 4 lays out the four steps of the methodology , starting in the upper left-hand...as a function of changes in key inputs. We develop NAVARM Experimental Designs (NED), a computational tool created by applying a state-of-the-art...experimental design to the NAVARM model. Statistical analysis of the resulting data identifies the most influential cost factors. Those are, in order of

Application of Graph Theory to Cost-Effective Fire Protection of Chemical Plants During Domino Effects.

PubMed

Khakzad, Nima; Landucci, Gabriele; Reniers, Genserik

2017-09-01

In the present study, we have introduced a methodology based on graph theory and multicriteria decision analysis for cost-effective fire protection of chemical plants subject to fire-induced domino effects. By modeling domino effects in chemical plants as a directed graph, the graph centrality measures such as out-closeness and betweenness scores can be used to identify the installations playing a key role in initiating and propagating potential domino effects. It is demonstrated that active fire protection of installations with the highest out-closeness score and passive fire protection of installations with the highest betweenness score are the most effective strategies for reducing the vulnerability of chemical plants to fire-induced domino effects. We have employed a dynamic graph analysis to investigate the impact of both the availability and the degradation of fire protection measures over time on the vulnerability of chemical plants. The results obtained from the graph analysis can further be prioritized using multicriteria decision analysis techniques such as the method of reference point to find the most cost-effective fire protection strategy. © 2016 Society for Risk Analysis.

Balancing costs and benefits at different stages of medical innovation: a systematic review of Multi-criteria decision analysis (MCDA).

PubMed

Wahlster, Philip; Goetghebeur, Mireille; Kriza, Christine; Niederländer, Charlotte; Kolominsky-Rabas, Peter

2015-07-09

The diffusion of health technologies from translational research to reimbursement depends on several factors included the results of health economic analysis. Recent research identified several flaws in health economic concepts. Additionally, the heterogeneous viewpoints of participating stakeholders are rarely systematically addressed in current decision-making. Multi-criteria Decision Analysis (MCDA) provides an opportunity to tackle these issues. The objective of this study was to review applications of MCDA methods in decisions addressing the trade-off between costs and benefits. Using basic steps of the PRISMA guidelines, a systematic review of the healthcare literature was performed to identify original research articles from January 1990 to April 2014. Medline, PubMed, Springer Link and specific journals were searched. Using predefined categories, bibliographic records were systematically extracted regarding the type of policy applications, MCDA methodology, criteria used and their definitions. 22 studies were included in the analysis. 15 studies (68 %) used direct MCDA approaches and seven studies (32 %) used preference elicitation approaches. Four studies (19 %) focused on technologies in the early innovation process. The majority (18 studies - 81 %) examined reimbursement decisions. Decision criteria used in studies were obtained from the literature research and context-specific studies, expert opinions, and group discussions. The number of criteria ranged between three up to 15. The most frequently used criteria were health outcomes (73 %), disease impact (59 %), and implementation of the intervention (40 %). Economic criteria included cost-effectiveness criteria (14 studies, 64 %), and total costs/budget impact of an intervention (eight studies, 36 %). The process of including economic aspects is very different among studies. Some studies directly compare costs with other criteria while some include economic consideration in a second step. In early innovation processes, MCDA can provide information about stakeholder preferences as well as evidence needs in further development. However, only a minority of these studies include economic features due to the limited evidence. The most important economic criterion cost-effectiveness should not be included from a technical perspective as it is already a composite of costs and benefit. There is a significant lack of consensus in methodology employed by the various studies which highlights the need for guidance on application of MCDA at specific phases of an innovation.

Cost-effectiveness analysis of population-based tobacco control strategies in the prevention of cardiovascular diseases in Tanzania

PubMed Central

Ngalesoni, Frida; Ruhago, George; Mayige, Mary; Oliveira, Tiago Cravo; Robberstad, Bjarne; Norheim, Ole Frithjof; Higashi, Hideki

2017-01-01

Background Tobacco consumption contributes significantly to the global burden of disease. The prevalence of smoking is estimated to be increasing in many low-income countries, including Tanzania, especially among women and youth. Even so, the implementation of tobacco control measures has been discouraging in the country. Efforts to foster investment in tobacco control are hindered by lack of evidence on what works and at what cost. Aims We aim to estimate the cost and cost-effectiveness of population-based tobacco control strategies in the prevention of cardiovascular diseases (CVD) in Tanzania. Materials and methods A cost-effectiveness analysis was performed using an Excel-based Markov model, from a governmental perspective. We employed an ingredient approach and step-down methodologies in the costing exercise following a government perspective. Epidemiological data and efficacy inputs were derived from the literature. We used disability-adjusted life years (DALYs) averted as the outcome measure. A probabilistic sensitivity analysis was carried out with Ersatz to incorporate uncertainties in the model parameters. Results Our model results showed that all five tobacco control strategies were very cost-effective since they fell below the ceiling ratio of one GDP per capita suggested by the WHO. Increase in tobacco taxes was the most cost-effective strategy, while a workplace smoking ban was the least cost-effective option, with a cost-effectiveness ratio of US$5 and US$267, respectively. Conclusions Even though all five interventions are deemed very cost-effective in the prevention of CVD in Tanzania, more research on budget impact analysis is required to further assess the government’s ability to implement these interventions. PMID:28767722

Using cost-benefit analysis and social return on investment to evaluate the impact of social enterprise: Promises, implementation, and limitations.

PubMed

Cordes, Joseph J

2017-10-01

Since the early 2000's there has been growing interest in using the Social Return on Investment (SROI) as a measure for assessing the performance of social enterprises. By analogy with its business counterpart, the Return on Investment (ROI), the SROI is a metric that compares the monetized social costs of a program with the monetized social benefits of achieving an outcome (or set of outcomes). For example, calculating the SROI of a nonprofit half-way house for drug addicts might involve estimating the reduced social costs attributable to successful rehabilitation of addicts, and comparing this to the social costs of operating the half-way house. Alternatively, the total return of a for-profit social enterprise providing affordable housing might consist both of the traditional private return on investment along with the economic value of meeting the housing needs of lower income households. Early descriptions of the methodology for calculating the SROI suggest that the approach initially evolved from standard methodologies found in the business finance literature for evaluating investments, with the important twist that nonprofit sector returns/payoffs are defined in broader social terms (Thornley, Anderson, & Dixon, 2016). Yet, someone who is familiar with the economic literature on cost benefit analysis (CBA) as it is applied to the evaluation of public programs cannot help but be struck by the similarity between the outcomes that CBA is intended to measure, and those that are the object of efforts to calculate the SROI. One implication is that the literature on the theory and practice of cost benefit analysis offers useful lessons about how to measure the social return on investment, as well as about potential caveats and limitations that need to be confronted when attempting to undertake an analysis of the SROI. The paper discusses the potential uses and limitations of CBA and SROI as tools that governments, private donor/investors, and foundations can use to help set funding priorities, and evaluate performance. It summarizes: (1) the conceptual foundations of CBA and its application to SROI analysis, (2) issues raised in the implementation of CBA and SROI in practice, and (3) discusses when CBA and/or SROI approaches are a useful lens for setting priorities and/or evaluating performance, as well as important limitations of such methods. Copyright © 2016 Elsevier Ltd. All rights reserved.

Improving Logistics Realism in Command Post Exercises Involving the KC-135A/E/R Aircraft Using a Historical Aircraft Maintenance Database Model

DTIC Science & Technology

1990-09-01

exper[ ence in u.sings both the KC-13iA/E/R d ,aboase model and other mat.hematival models. A staListical analysis of survey oz;ai,.,arons, will be...statistic. Consequently, differ- ences of opinion among respondents will be amplified. Summary The research methodology provide5 a sequential set of...Cost Accounting Direc- torate (AFLC/ACC). Though used for cost accounting pur- poses, the VAMOSC system has the capability of cross refer- encing a WUC

First NASA Advanced Composites Technology Conference, Part 2

NASA Technical Reports Server (NTRS)

Davis, John G., Jr. (Compiler); Bohon, Herman L. (Compiler)

1991-01-01

Presented here is a compilation of papers presented at the first NASA Advanced Composites Technology (ACT) Conference held in Seattle, Washington, from 29 Oct. to 1 Nov. 1990. The ACT program is a major new multiyear research initiative to achieve a national goal of technology readiness before the end of the decade. Included are papers on materials development and processing, innovative design concepts, analysis development and validation, cost effective manufacturing methodology, and cost tracking and prediction procedures. Papers on major applications programs approved by the Department of Defense are also included.

Cost analysis in a clinical microbiology laboratory.

PubMed

Brezmes, M F; Ochoa, C; Eiros, J M

2002-08-01

The use of models for business management and cost control in public hospitals has led to a need for microbiology laboratories to know the real cost of the different products they offer. For this reason, a catalogue of microbiological products was prepared, and the costs (direct and indirect) for each product were analysed, along with estimated profitability. All tests performed in the microbiology laboratory of the "Virgen de la Concha" Hospital in Zamora over a 2-year period (73192 tests) were studied. The microbiological product catalogue was designed using homogeneity criteria with respect to procedures used, workloads and costs. For each product, the direct personnel costs (estimated from workloads following the method of the College of American Pathologists, 1992 version), the indirect personnel costs, the direct and indirect material costs and the portion of costs corresponding to the remaining laboratory costs (capital and structural costs) were calculated. The average product cost was 16.05 euros. The average cost of a urine culture (considered, for purposes of this study, as a relative value unit) reached 13.59 euros, with a significant difference observed between positive and negative cultures (negative urine culture, 10.72 euros; positive culture, 29.65 euros). Significant heterogeneity exists, both in the costs of different products and especially in the cost per positive test. The application of a detailed methodology of cost analysis facilitates the calculation of the real cost of microbiological products. This information provides a basic tool for establishing clinical management strategies.

Landslide Risk: Economic Valuation in The North-Eastern Zone of Medellin City

NASA Astrophysics Data System (ADS)

Vega, Johnny Alexander; Hidalgo, César Augusto; Johana Marín, Nini

2017-10-01

Natural disasters of a geodynamic nature can cause enormous economic and human losses. The economic costs of a landslide disaster include relocation of communities and physical repair of urban infrastructure. However, when performing a quantitative risk analysis, generally, the indirect economic consequences of such an event are not taken into account. A probabilistic approach methodology that considers several scenarios of hazard and vulnerability to measure the magnitude of the landslide and to quantify the economic costs is proposed. With this approach, it is possible to carry out a quantitative evaluation of the risk by landslides, allowing the calculation of the economic losses before a potential disaster in an objective, standardized and reproducible way, taking into account the uncertainty of the building costs in the study zone. The possibility of comparing different scenarios facilitates the urban planning process, the optimization of interventions to reduce risk to acceptable levels and an assessment of economic losses according to the magnitude of the damage. For the development and explanation of the proposed methodology, a simple case study is presented, located in north-eastern zone of the city of Medellín. This area has particular geomorphological characteristics, and it is also characterized by the presence of several buildings in bad structural conditions. The proposed methodology permits to obtain an estimative of the probable economic losses by earthquake-induced landslides, taking into account the uncertainty of the building costs in the study zone. The obtained estimative shows that the structural intervention of the buildings produces a reduction the order of 21 % in the total landslide risk.

The Economic Impact of Closed-Incision Negative-Pressure Therapy in High-Risk Abdominal Incisions: A Cost-Utility Analysis.

PubMed

Chopra, Karan; Gowda, Arvind U; Morrow, Chris; Holton, Luther; Singh, Devinder P

2016-04-01

Complex abdominal wall reconstruction is beset by postoperative complications. A recent meta-analysis comparing the use of closed-incision negative-pressure therapy to standard dressings found a statistically significant reduction in surgical-site infection. The use of closed-incision negative-pressure therapy is gaining acceptance in this population; however, the economic impact of this innovative dressing remains unknown. In this study, a cost-utility analysis was performed assessing closed-incision negative-pressure therapy and standard dressings following closure of abdominal incisions in high-risk patients. Cost-utility methodology involved reviewing literature related to closed-incision negative-pressure therapy in abdominal wall surgery, obtaining utility estimates to calculate quality-adjusted life-year scores for successful surgery and surgery complicated by surgical-site infection, summing costs using Medicare Current Procedural Terminology codes, and creating a decision tree illuminating the most cost-effective dressing strategy. One-way sensitivity analysis was performed to assess the robustness of the results. The aforementioned meta-analysis comparing closed-incision negative-pressure therapy to standard dressings included a subset of five studies assessing abdominal wall surgery in 829 patients (260 closed-incision negative-pressure therapy and 569 standard dressings). Decision tree analysis revealed an estimated savings of $1546.52 and a gain of 0.0024 quality-adjusted life-year with closed-incision negative-pressure therapy compared with standard dressings; therefore, closed-incision negative-pressure therapy is a dominant treatment strategy. One-way sensitivity analysis revealed that closed-incision negative-pressure therapy is a cost-effective option when the surgical-site infection rate is greater than 16.39 percent. The use of closed-incision negative-pressure therapy is cost-saving following closure of abdominal incisions in high-risk patients.

Cost evaluation to optimise radiation therapy implementation in different income settings: A time-driven activity-based analysis.

PubMed

Van Dyk, Jacob; Zubizarreta, Eduardo; Lievens, Yolande

2017-11-01

With increasing recognition of growing cancer incidence globally, efficient means of expanding radiotherapy capacity is imperative, and understanding the factors impacting human and financial needs is valuable. A time-driven activity-based costing analysis was performed, using a base case of 2-machine departments, with defined cost inputs and operating parameters. Four income groups were analysed, ranging from low to high income. Scenario analyses included department size, operating hours, fractionation, treatment complexity, efficiency, and centralised versus decentralised care. The base case cost/course is US$5,368 in HICs, US$2,028 in LICs; the annual operating cost is US$4,595,000 and US$1,736,000, respectively. Economies of scale show cost/course decreasing with increasing department size, mainly related to the equipment cost and most prominent up to 3 linacs. The cost in HICs is two or three times as high as in U-MICs or LICs, respectively. Decreasing operating hours below 8h/day has a dramatic impact on the cost/course. IMRT increases the cost/course by 22%. Centralising preparatory activities has a moderate impact on the costs. The results indicate trends that are useful for optimising local and regional circumstances. This methodology can provide input into a uniform and accepted approach to evaluating the cost of radiotherapy. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

A Systematic Review and Methodological Evaluation of Published Cost-Effectiveness Analyses of Aromatase Inhibitors versus Tamoxifen in Early Stage Breast Cancer

PubMed Central

John-Baptiste, Ava A.; Wu, Wei; Rochon, Paula; Anderson, Geoffrey M.; Bell, Chaim M.

2013-01-01

Background A key priority in developing policies for providing affordable cancer care is measuring the value for money of new therapies using cost-effectiveness analyses (CEAs). For CEA to be useful it should focus on relevant outcomes and include thorough investigation of uncertainty. Randomized controlled trials (RCTs) of five years of aromatase inhibitors (AI) versus five years of tamoxifen in the treatment of post-menopausal women with early stage breast cancer, show benefit of AI in terms of disease free survival (DFS) but not overall survival (OS) and indicate higher risk of fracture with AI. Policy-relevant CEA of AI versus tamoxifen should focus on OS and include analysis of uncertainty over key assumptions. Methods We conducted a systematic review of published CEAs comparing an AI to tamoxifen. We searched Ovid MEDLINE, EMBASE, PsychINFO, and the Cochrane Database of Systematic Reviews without language restrictions. We selected CEAs with outcomes expressed as cost per life year or cost per quality adjusted life year (QALY). We assessed quality using the Neumann checklist. Using structured forms two abstractors collected descriptive information, sources of data, baseline assumptions on effectiveness and adverse events, and recorded approaches to assessing parameter uncertainty, methodological uncertainty, and structural uncertainty. Results We identified 1,622 citations and 18 studies met inclusion criteria. All CE estimates assumed a survival benefit for aromatase inhibitors. Twelve studies performed sensitivity analysis on the risk of adverse events and 7 assumed no additional mortality risk with any adverse event. Sub-group analysis was limited; 6 studies examined older women, 2 examined women with low recurrence risk, and 1 examined women with multiple comorbidities. Conclusion Published CEAs comparing AIs to tamoxifen assumed an OS benefit though none has been shown in RCTs, leading to an overestimate of the cost-effectiveness of AIs. Results of these CEA analyses may be suboptimal for guiding policy. PMID:23671612

A systematic review and methodological evaluation of published cost-effectiveness analyses of aromatase inhibitors versus tamoxifen in early stage breast cancer.

PubMed

John-Baptiste, Ava A; Wu, Wei; Rochon, Paula; Anderson, Geoffrey M; Bell, Chaim M

2013-01-01

A key priority in developing policies for providing affordable cancer care is measuring the value for money of new therapies using cost-effectiveness analyses (CEAs). For CEA to be useful it should focus on relevant outcomes and include thorough investigation of uncertainty. Randomized controlled trials (RCTs) of five years of aromatase inhibitors (AI) versus five years of tamoxifen in the treatment of post-menopausal women with early stage breast cancer, show benefit of AI in terms of disease free survival (DFS) but not overall survival (OS) and indicate higher risk of fracture with AI. Policy-relevant CEA of AI versus tamoxifen should focus on OS and include analysis of uncertainty over key assumptions. We conducted a systematic review of published CEAs comparing an AI to tamoxifen. We searched Ovid MEDLINE, EMBASE, PsychINFO, and the Cochrane Database of Systematic Reviews without language restrictions. We selected CEAs with outcomes expressed as cost per life year or cost per quality adjusted life year (QALY). We assessed quality using the Neumann checklist. Using structured forms two abstractors collected descriptive information, sources of data, baseline assumptions on effectiveness and adverse events, and recorded approaches to assessing parameter uncertainty, methodological uncertainty, and structural uncertainty. We identified 1,622 citations and 18 studies met inclusion criteria. All CE estimates assumed a survival benefit for aromatase inhibitors. Twelve studies performed sensitivity analysis on the risk of adverse events and 7 assumed no additional mortality risk with any adverse event. Sub-group analysis was limited; 6 studies examined older women, 2 examined women with low recurrence risk, and 1 examined women with multiple comorbidities. Published CEAs comparing AIs to tamoxifen assumed an OS benefit though none has been shown in RCTs, leading to an overestimate of the cost-effectiveness of AIs. Results of these CEA analyses may be suboptimal for guiding policy.

Application of low-cost methodologies for mobile phone app development.

PubMed

Zhang, Melvyn; Cheow, Enquan; Ho, Cyrus Sh; Ng, Beng Yeong; Ho, Roger; Cheok, Christopher Cheng Soon

2014-12-09

The usage of mobile phones and mobile phone apps in the recent decade has indeed become more prevalent. Previous research has highlighted a method of using just the Internet browser and a text editor to create an app, but this does not eliminate the challenges faced by clinicians. More recently, two methodologies of app development have been shared, but there has not been any disclosures pertaining to the costs involved. In addition, limitations such as the distribution and dissemination of the apps have not been addressed. The aims of this research article are to: (1) highlight a low-cost methodology that clinicians without technical knowledge could use to develop educational apps; (2) clarify the respective costs involved in the process of development; (3) illustrate how limitations pertaining to dissemination could be addressed; and (4) to report initial utilization data of the apps and to share initial users' self-rated perception of the apps. In this study, we will present two techniques of how to create a mobile app using two of the well-established online mobile app building websites. The costs of development are specified and the methodology of dissemination of the apps will be shared. The application of the low-cost methodologies in the creation of the "Mastering Psychiatry" app for undergraduates and "Déjà vu" app for postgraduates will be discussed. A questionnaire survey has been administered to undergraduate students collating their perceptions towards the app. For the Mastering Psychiatry app, a cumulative total of 722 users have used the mobile app since inception, based on our analytics. For the Déjà vu app, there has been a cumulative total of 154 downloads since inception. The utilization data demonstrated the receptiveness towards these apps, and this is reinforced by the positive perceptions undergraduate students (n=185) had towards the low-cost self-developed apps. This is one of the few studies that have demonstrated the low-cost methodologies of app development; as well as student and trainee receptivity toward self-created Web-based mobile phone apps. The results obtained have demonstrated that these Web-based low-cost apps are applicable in the real life, and suggest that the methodologies shared in this research paper might be of benefit for other specialities and disciplines.

Application of Low-Cost Methodologies for Mobile Phone App Development

PubMed Central

Ng, Beng Yeong; Ho, Roger; Cheok, Christopher Cheng Soon

2014-01-01

Background The usage of mobile phones and mobile phone apps in the recent decade has indeed become more prevalent. Previous research has highlighted a method of using just the Internet browser and a text editor to create an app, but this does not eliminate the challenges faced by clinicians. More recently, two methodologies of app development have been shared, but there has not been any disclosures pertaining to the costs involved. In addition, limitations such as the distribution and dissemination of the apps have not been addressed. Objective The aims of this research article are to: (1) highlight a low-cost methodology that clinicians without technical knowledge could use to develop educational apps; (2) clarify the respective costs involved in the process of development; (3) illustrate how limitations pertaining to dissemination could be addressed; and (4) to report initial utilization data of the apps and to share initial users’ self-rated perception of the apps. Methods In this study, we will present two techniques of how to create a mobile app using two of the well-established online mobile app building websites. The costs of development are specified and the methodology of dissemination of the apps will be shared. The application of the low-cost methodologies in the creation of the “Mastering Psychiatry” app for undergraduates and “Déjà vu” app for postgraduates will be discussed. A questionnaire survey has been administered to undergraduate students collating their perceptions towards the app. Results For the Mastering Psychiatry app, a cumulative total of 722 users have used the mobile app since inception, based on our analytics. For the Déjà vu app, there has been a cumulative total of 154 downloads since inception. The utilization data demonstrated the receptiveness towards these apps, and this is reinforced by the positive perceptions undergraduate students (n=185) had towards the low-cost self-developed apps. Conclusions This is one of the few studies that have demonstrated the low-cost methodologies of app development; as well as student and trainee receptivity toward self-created Web-based mobile phone apps. The results obtained have demonstrated that these Web-based low-cost apps are applicable in the real life, and suggest that the methodologies shared in this research paper might be of benefit for other specialities and disciplines. PMID:25491323

REUSABLE PROPULSION ARCHITECTURE FOR SUSTAINABLE LOW-COST ACCESS TO SPACE

NASA Technical Reports Server (NTRS)

Bonometti, J. A.; Dankanich, J. W.; Frame, K. L.

2005-01-01

The primary obstacle to any space-based mission is, and has always been, the cost of access to space. Even with impressive efforts toward reusability, no system has come close to lowering the cost a significant amount. It is postulated here, that architectural innovation is necessary to make reusability feasible, not incremental subsystem changes. This paper shows two architectural approaches of reusability that merit further study investments. Both #inherently# have performance increases and cost advantages to make affordable access to space a near term reality. A rocket launched from a subsonic aircraft (specifically the Crossbow methodology) and a momentum exchange tether, reboosted by electrodynamics, offer possibilities of substantial reductions in the total transportation architecture mass - making access-to-space cost-effective. They also offer intangible benefits that reduce risk or offer large growth potential. The cost analysis indicates that approximately a 50% savings is obtained using today#s aerospace materials and practices.

Integrated Design Methodology for Highly Reliable Liquid Rocket Engine

NASA Astrophysics Data System (ADS)

Kuratani, Naoshi; Aoki, Hiroshi; Yasui, Masaaki; Kure, Hirotaka; Masuya, Goro

The Integrated Design Methodology is strongly required at the conceptual design phase to achieve the highly reliable space transportation systems, especially the propulsion systems, not only in Japan but also all over the world in these days. Because in the past some catastrophic failures caused some losses of mission and vehicle (LOM/LOV) at the operational phase, moreover did affect severely the schedule delays and cost overrun at the later development phase. Design methodology for highly reliable liquid rocket engine is being preliminarily established and investigated in this study. The sensitivity analysis is systematically performed to demonstrate the effectiveness of this methodology, and to clarify and especially to focus on the correlation between the combustion chamber, turbopump and main valve as main components. This study describes the essential issues to understand the stated correlations, the need to apply this methodology to the remaining critical failure modes in the whole engine system, and the perspective on the engine development in the future.

Social Costs of Gambling in the Czech Republic 2012.

PubMed

Winkler, Petr; Bejdová, Markéta; Csémy, Ladislav; Weissová, Aneta

2017-12-01

Evidence about social costs of gambling is scarce and the methodology for their calculation has been a subject to strong criticism. We aimed to estimate social costs of gambling in the Czech Republic 2012. This retrospective, prevalence based cost of illness study builds on the revised methodology of Australian Productivity Commission. Social costs of gambling were estimated by combining epidemiological and economic data. Prevalence data on negative consequences of gambling were taken from existing national epidemiological studies. Economic data were taken from various national and international sources. Consequences of problem and pathological gambling only were taken into account. In 2012, the social costs of gambling in the Czech Republic were estimated to range between 541,619 and 619,608 thousands EUR. While personal and family costs accounted for 63% of all social costs, direct medical costs were estimated to range from 0.25 to 0.28% of all social costs only. This is the first study which estimates social costs of gambling in any of the Central and East European countries. It builds upon the solid evidence about prevalence of gambling related problems in the Czech Republic and satisfactorily reliable economic data. However, there is a number of limitations stemming from assumptions that were made, which suggest that the methodology for the calculation of the social costs of gambling needs further development.

Proposed reliability cost model

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1973-01-01

The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

75 FR 76954 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Extension of Time Limit for Final...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-10

... Film, Sheet, and Strip From Taiwan: Extension of Time Limit for Final Results of the Antidumping Duty... preliminary results of this review. See Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan... Results and to issue a post-preliminary analysis regarding whether to use an alternate cost methodology...

Value based care and bundled payments: Anesthesia care costs for outpatient oncology surgery using time-driven activity-based costing.

PubMed

French, Katy E; Guzman, Alexis B; Rubio, Augustin C; Frenzel, John C; Feeley, Thomas W

2016-09-01

With the movement towards bundled payments, stakeholders should know the true cost of the care they deliver. Time-driven activity-based costing (TDABC) can be used to estimate costs for each episode of care. In this analysis, TDABC is used to both estimate the costs of anesthesia care and identify the primary drivers of those costs of 11 common oncologic outpatient surgical procedures. Personnel cost were calculated by determining the hourly cost of each provider and the associated process time of the 11 surgical procedures. Using the anesthesia record, drugs, supplies and equipment costs were identified and calculated. The current staffing model was used to determine baseline personnel costs for each procedure. Using the costs identified through TDABC analysis, the effect of different staffing ratios on anesthesia costs could be predicted. Costs for each of the procedures were determined. Process time and costs are linearly related. Personnel represented 79% of overall cost while drugs, supplies and equipment represented the remaining 21%. Changing staffing ratios shows potential savings between 13% and 28% across the 11 procedures. TDABC can be used to estimate the costs of anesthesia care. This costing information is critical to assessing the anesthesiology component in a bundled payment. It can also be used to identify areas of cost savings and model costs of anesthesia care. CRNA to anesthesiologist staffing ratios profoundly influence the cost of care. This methodology could be applied to other medical specialties to help determine costs in the setting of bundled payments. Copyright © 2015 Elsevier Inc. All rights reserved.

Value Based Care and Bundled Payments: Anesthesia Care Costs for Outpatient Oncology Surgery Using Time-Driven Activity-Based Costing

PubMed Central

French, Katy E.; Guzman, Alexis B.; Rubio, Augustin C.; Frenzel, John C.; Feeley, Thomas W

2015-01-01

Background With the movement towards bundled payments, stakeholders should know the true cost of the care they deliver. Time-driven activity-based costing (TDABC) can be used to estimate costs for each episode of care. In this analysis, TDABC is used to both estimate the costs of anesthesia care and identify the primary drivers of those costs of 11 common oncologic outpatient surgical procedures. Methods Personnel cost were calculated by determining the hourly cost of each provider and the associated process time of the 11 surgical procedures. Using the anesthesia record, drugs, supplies and equipment costs were identified and calculated. The current staffing model was used to determine baseline personnel costs for each procedure. Using the costs identified through TDABC analysis, the effect of different staffing ratios on anesthesia costs could be predicted. Results Costs for each of the procedures were determined. Process time and costs are linearly related. Personnel represented 79% of overall cost while drugs, supplies and equipment represented the remaining 21%. Changing staffing ratios shows potential savings between 13-28% across the 11 procedures. Conclusions TDABC can be used to estimate the costs of anesthesia care. This costing information is critical to assessing the anesthesiology component in a bundled payment. It can also be used to identify areas of cost savings and model costs of anesthesia care. CRNA to anesthesiologist staffing ratios profoundly influence the cost of care. This methodology could be applied to other medical specialties to help determine costs in the setting of bundled payments. PMID:27637823

A reference case for economic evaluations in osteoarthritis: an expert consensus article from the European Society for Clinical and Economic Aspects of Osteoporosis and Osteoarthritis (ESCEO).

PubMed

Hiligsmann, Mickaël; Cooper, Cyrus; Guillemin, Francis; Hochberg, Marc C; Tugwell, Peter; Arden, Nigel; Berenbaum, Francis; Boers, Maarten; Boonen, Annelies; Branco, Jaime C; Maria-Luisa, Brandi; Bruyère, Olivier; Gasparik, Andrea; Kanis, John A; Kvien, Tore K; Martel-Pelletier, Johanne; Pelletier, Jean-Pierre; Pinedo-Villanueva, Rafael; Pinto, Daniel; Reiter-Niesert, Susanne; Rizzoli, René; Rovati, Lucio C; Severens, Johan L; Silverman, Stuart; Reginster, Jean-Yves

2014-12-01

General recommendations for a reference case for economic studies in rheumatic diseases were published in 2002 in an initiative to improve the comparability of cost-effectiveness studies in the field. Since then, economic evaluations in osteoarthritis (OA) continue to show considerable heterogeneity in methodological approach. To develop a reference case specific for economic studies in OA, including the standard optimal care, with which to judge new pharmacologic and non-pharmacologic interventions. Four subgroups of an ESCEO expert working group on economic assessments (13 experts representing diverse aspects of clinical research and/or economic evaluations) were charged with producing lists of recommendations that would potentially improve the comparability of economic analyses in OA: outcome measures, comparators, costs and methodology. These proposals were discussed and refined during a face-to-face meeting in 2013. They are presented here in the format of the recommendations of the recently published Consolidated Health Economic Evaluation Reporting Standards (CHEERS) statement, so that an initiative on economic analysis methodology might be consolidated with an initiative on reporting standards. Overall, three distinct reference cases are proposed, one for each hand, knee and hip OA; with diagnostic variations in the first two, giving rise to different treatment options: interphalangeal or thumb-based disease for hand OA and the presence or absence of joint malalignment for knee OA. A set of management strategies is proposed, which should be further evaluated to help establish a consensus on the "standard optimal care" in each proposed reference case. The recommendations on outcome measures, cost itemisation and methodological approaches are also provided. The ESCEO group proposes a set of disease-specific recommendations on the conduct and reporting of economic evaluations in OA that could help the standardisation and comparability of studies that evaluate therapeutic strategies of OA in terms of costs and effectiveness. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Assessing value-based health care delivery for haemodialysis.

PubMed

Parra, Eduardo; Arenas, María Dolores; Alonso, Manuel; Martínez, María Fernanda; Gamen, Ángel; Aguarón, Juan; Escobar, María Teresa; Moreno-Jiménez, José María; Alvarez-Ude, Fernando

2017-06-01

Disparities in haemodialysis outcomes among centres have been well-documented. Besides, attempts to assess haemodialysis results have been based on non-comprehensive methodologies. This study aimed to develop a comprehensive methodology for assessing haemodialysis centres, based on the value of health care. The value of health care is defined as the patient benefit from a specific medical intervention per monetary unit invested (Value = Patient Benefit/Cost). This study assessed the value of health care and ranked different haemodialysis centres. A nephrology quality management group identified the criteria for the assessment. An expert group composed of stakeholders (patients, clinicians and managers) agreed on the weighting of each variable, considering values and preferences. Multi-criteria methodology was used to analyse the data. Four criteria and their weights were identified: evidence-based clinical performance measures = 43 points; yearly mortality = 27 points; patient satisfaction = 13 points; and health-related quality of life = 17 points (100-point scale). Evidence-based clinical performance measures included five sub-criteria, with respective weights, including: dialysis adequacy; haemoglobin concentration; mineral and bone disorders; type of vascular access; and hospitalization rate. The patient benefit was determined from co-morbidity-adjusted results and corresponding weights. The cost of each centre was calculated as the average amount expended per patient per year. The study was conducted in five centres (1-5). After adjusting for co-morbidity, value of health care was calculated, and the centres were ranked. A multi-way sensitivity analysis that considered different weights (10-60% changes) and costs (changes of 10% in direct and 30% in allocated costs) showed that the methodology was robust. The rankings: 4-5-3-2-1 and 4-3-5-2-1 were observed in 62.21% and 21.55%, respectively, of simulations, when weights were varied by 60%. Value assessments may integrate divergent stakeholder perceptions, create a context for improvement and aid in policy-making decisions. © 2015 John Wiley & Sons, Ltd.

Costing for the Future: Exploring Cost Estimation With Unmanned Autonomous Systems

DTIC Science & Technology

2016-04-30

account for how cost estimating for autonomy is different than current methodologies and to suggest ways it can be addressed through the integration and...The Development stage involves refining the system requirements, creating a solution description , and building a system. 3. The Operational Test...parameter describes the extent to which efficient fabrication methodologies and processes are used, and the automation of labor-intensive operations

How Much Does Medical Education Cost? A Review. Health Manpower Policy Discussion Paper Series No. A3.

ERIC Educational Resources Information Center

MacBride, Owen

This survey of studies of medical school costs was made in order to evaluate and compare the methodologies and findings of those studies. The survey covered studies of one or more medical schools that either produced figures for average annual per-student cost of education and/or discussed the methodologies and problems involved in producing such…

Evaluation of Methodology for Estimating the Cost of Air Force On-The-Job Training. Final Report.

ERIC Educational Resources Information Center

Samers, Bernard N.; And Others

Described is the final phase of a study directed at the development of an on-the-job training (OJT) costing methodology. Utilizing a modification of survey techniques tested and evaluated during the previous phase, estimates were obtained for the cost of OJT for airman training from the l-level (unskilled to the 3-level (semiskilled) in five…

Cost-effectiveness analysis in melanoma detection: A transition model applied to dermoscopy.

PubMed

Tromme, Isabelle; Legrand, Catherine; Devleesschauwer, Brecht; Leiter, Ulrike; Suciu, Stefan; Eggermont, Alexander; Sacré, Laurine; Baurain, Jean-François; Thomas, Luc; Beutels, Philippe; Speybroeck, Niko

2016-11-01

The main aim of this study is to demonstrate how our melanoma disease model (MDM) can be used for cost-effectiveness analyses (CEAs) in the melanoma detection field. In particular, we used the data of two cohorts of Belgian melanoma patients to investigate the cost-effectiveness of dermoscopy. A MDM, previously constructed to calculate the melanoma burden, was slightly modified to be suitable for CEAs. Two cohorts of patients entered into the model to calculate morbidity, mortality and costs. These cohorts were constituted by melanoma patients diagnosed by dermatologists adequately, or not adequately, trained in dermoscopy. Effectiveness and costs were calculated for each cohort and compared. Effectiveness was expressed in quality-adjusted life years (QALYs), a composite measure depending on melanoma-related morbidity and mortality. Costs included costs of treatment and follow-up as well as costs of detection in non-melanoma patients and costs of excision and pathology of benign lesions excised to rule out melanoma. The result of our analysis concluded that melanoma diagnosis by dermatologists adequately trained in dermoscopy resulted in both a gain of QALYs (less morbidity and/or mortality) and a reduction in costs. This study demonstrates how our MDM can be used in CEAs in the melanoma detection field. The model and the methodology suggested in this paper were applied to two cohorts of Belgian melanoma patients. Their analysis concluded that adequate dermoscopy training is cost-effective. The results should be confirmed by a large-scale randomised study. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cost-Effectiveness Analysis of Diagnosis of Duchenne/Becker Muscular Dystrophy in Colombia.

PubMed

Atehortúa, Sara C; Lugo, Luz H; Ceballos, Mateo; Orozco, Esteban; Castro, Paula A; Arango, Juan C; Mateus, Heidi E

2018-03-09

To determine the cost-effectiveness ratio of different courses of action for the diagnosis of Duchenne or Becker muscular dystrophy in Colombia. The cost-effectiveness analysis was performed from the Colombian health system perspective. Decision trees were constructed, and different courses of action were compared considering the following tests: immunohistochemistry (IHC), Western blot (WB), multiplex polymerase chain reaction, multiplex ligation-dependent probe amplification (MLPA), and the complete sequencing of the dystrophin gene. The time horizon matched the duration of sample extraction and analysis. Transition probabilities were obtained from a systematic review. Costs were constructed with a type-case methodology using the consensus of experts and the valuation of resources from consulting laboratories and the 2001 Social Security Institute cost manual. Deterministic sensitivity and scenario analyses were performed with one or more unavailable alternatives. Costs were converted from Colombian pesos to US dollars using the 2014 exchange rate. In the base case, WB was the dominant strategy, with a cost of US $419.07 and a sensitivity of 100%. This approach remains the dominant strategy down to a 98.2% sensitivity and while costs do not exceed US $837.38. If WB was not available, IHC had the best cost-effectiveness ratio, followed by MLPA and sequencing. WB is a cost-effective alternative for the diagnosis of patients suspected of having Duchenne or Becker muscular dystrophy in the Colombian health system. The IHC test is rated as the second-best detection method. If these tests are not available, MLPA followed by sequencing would be the most cost-effective alternative. Copyright © 2018. Published by Elsevier Inc.

Determining if disease management saves money: an introduction to meta-analysis.

PubMed

Linden, Ariel; Adams, John L

2007-06-01

Disease management (DM) programmes have long been promoted as a major medical cost-saving mechanism, even though the scant research that exists on the topic has provided conflicting results. In a 2004 literature review, the Congressional Budget Office stated that 'there is insufficient evidence to conclude that disease management programs can generally reduce the overall cost of health care services'. To address this question more accurately, a meta-analysis was warranted. Meta-analysis is the quantitative technique used to pool the results of many studies on the same topic and summarize them statistically. This method is also quite suitable for individual DM firms to assess whether their programmes are effective at the aggregate level. This paper describes the elements of a rigorous meta-analytic process and discusses potential biases. A hypothetical DM organization is then evaluated with a specific emphasis on medical cost-savings, simulating a case in which different populations are served, evaluation methodologies are employed, and diseases are managed.

Manned Mars mission cost estimate

NASA Technical Reports Server (NTRS)

Hamaker, Joseph; Smith, Keith

1986-01-01

The potential costs of several options of a manned Mars mission are examined. A cost estimating methodology based primarily on existing Marshall Space Flight Center (MSFC) parametric cost models is summarized. These models include the MSFC Space Station Cost Model and the MSFC Launch Vehicle Cost Model as well as other modes and techniques. The ground rules and assumptions of the cost estimating methodology are discussed and cost estimates presented for six potential mission options which were studied. The estimated manned Mars mission costs are compared to the cost of the somewhat analogous Apollo Program cost after normalizing the Apollo cost to the environment and ground rules of the manned Mars missions. It is concluded that a manned Mars mission, as currently defined, could be accomplished for under $30 billion in 1985 dollars excluding launch vehicle development and mission operations.

Integrated assessment of urban drainage system under the framework of uncertainty analysis.

PubMed

Dong, X; Chen, J; Zeng, S; Zhao, D

2008-01-01

Due to a rapid urbanization as well as the presence of large number of aging urban infrastructures in China, the urban drainage system is facing a dual pressure of construction and renovation nationwide. This leads to the need for an integrated assessment when an urban drainage system is under planning or re-design. In this paper, an integrated assessment methodology is proposed based upon the approaches of analytic hierarchy process (AHP), uncertainty analysis, mathematical simulation of urban drainage system and fuzzy assessment. To illustrate this methodology, a case study in Shenzhen City of south China has been implemented to evaluate and compare two different urban drainage system renovation plans, i.e., the distributed plan and the centralized plan. By comparing their water quality impacts, ecological impacts, technological feasibility and economic costs, the integrated performance of the distributed plan is found to be both better and robust. The proposed methodology is also found to be both effective and practical. (c) IWA Publishing 2008.

Discontinuous permeable adsorptive barrier design and cost analysis: a methodological approach to optimisation.

PubMed

Santonastaso, Giovanni Francesco; Bortone, Immacolata; Chianese, Simeone; Di Nardo, Armando; Di Natale, Michele; Erto, Alessandro; Karatza, Despina; Musmarra, Dino

2017-09-19

The following paper presents a method to optimise a discontinuous permeable adsorptive barrier (PAB-D). This method is based on the comparison of different PAB-D configurations obtained by changing some of the main PAB-D design parameters. In particular, the well diameters, the distance between two consecutive passive wells and the distance between two consecutive well lines were varied, and a cost analysis for each configuration was carried out in order to define the best performing and most cost-effective PAB-D configuration. As a case study, a benzene-contaminated aquifer located in an urban area in the north of Naples (Italy) was considered. The PAB-D configuration with a well diameter of 0.8 m resulted the best optimised layout in terms of performance and cost-effectiveness. Moreover, in order to identify the best configuration for the remediation of the aquifer studied, a comparison with a continuous permeable adsorptive barrier (PAB-C) was added. In particular, this showed a 40% reduction of the total remediation costs by using the optimised PAB-D.

Cost-effectiveness analysis of alternative factor VIII products in treatment of haemophilia A.

PubMed

Hay, J W; Ernst, R L; Kessler, C M

1999-05-01

Manufactured factor VIII (FVIII) concentrates of varying purity are available for managing patients with haemophilia A. This study is a cost-effectiveness analysis of ultra-high purity and recombinant (UHP/R) FVIII products relative to intermediate and very-high purity (IP/VHP) preparations. Because the societal (including research and development) costs of FVIII products are unknown and product prices vary with market conditions, we conducted the analysis with treatment cost as a variable quantity. We estimated the largest price premium that could be paid for a UHP/R concentrate relative to an IP/VHP concentrate such that the UHP/R product is the more cost-effective preparation. In the analysis haemophilic patients were assumed to be seropositive for human immunodeficiency virus, seropositive for hepatitis C (HCV), or at risk for seroconversion of hepatitis A (HAV) or hepatitis B (HBV). The results showed that the maximum cost-effective UHP/R price premium is essentially zero if the patient is only at risk of HAV or HBV infection, positive but small for the base-case HCV+ patient, and positive and large for the base-case HIV+ patient having a short life expectancy. Thus UHP/R preparations are not uniformly more cost-effective than IP/VHP products across the spectrum of haemophilic patients' health problems, and the relative cost-effectiveness of the two classes of prepared FVIII products is sensitive to product prices. The methodology employed here can be used in other circumstances where multiple treatments exist for illnesses for which there are significant multiple comorbidities or health risks.

Seeing the NICE side of cost-effectiveness analysis: a qualitative investigation of the use of CEA in NICE technology appraisals.

PubMed

Bryan, Stirling; Williams, Iestyn; McIver, Shirley

2007-02-01

Resource scarcity is the raison d'être for the discipline of economics. Thus, the primary purpose of economic analysis is to help decision-makers when addressing problems arising due to the scarcity problem. The research reported here was concerned with how cost-effectiveness information is used by the National Institute for Health & Clinical Excellence (NICE) in national technology coverage decisions in the UK, and how its impact might be increased. The research followed a qualitative case study methodology with semi-structured interviews, supported by observation and analysis of secondary sources. Our research highlights that the technology appraisal function of NICE represents an important progression for the UK health economics community: new cost-effectiveness work is commissioned for each technology and that work directly informs national health policy. However, accountability in policy decisions necessitates that the information upon which decisions are based (including cost-effectiveness analysis, CEA) is accessible. This was found to be a serious problem and represents one of the main ongoing challenges. Other issues highlighted include perceived weaknesses in analysis methods and the poor alignment between the health maximisation objectives assumed in economic analyses and the range of other objectives facing decision-makers in reality. Copyright (c) 2006 John Wiley & Sons, Ltd.

A PRELIMINARY METHODOLOGY FOR EVALUATING THE COST-EFFECTIVENESS OF ALTERNATIVE INDOOR AIR QUALITY APPROACHES

EPA Science Inventory

The report defines a simplified methodology that can be used by indoor air quality (IAQ) diagnosticians, architects/engineers, building owners/operators, and the scientific community for preliminary comparison of the cost-effectiveness of alternative IAQ control measures for any ...

Pricing and components analysis of some key essential pediatric medicine in Odisha state

PubMed Central

Samal, Satyajit; Swain, Trupti Rekha

2017-01-01

Objective: Study highlighting prices, i.e., the patients actually pay at ground level is important for interventions such as alternate procurement schemes or to expedite regulatory assessment of essential medicines for children. The present study was undertaken to study pricing and component analysis of few key essential medicines in Odisha state. Methodology: Six child-specific medicines of different formulations were selected based on use in different disease condition and having widest pricing variation. Data were collected, entered, and analyzed in the price components data collection form of the World Health Organization-Health Action International (WHO-HAI) 2007 Workbook version 5 – Part II provided as part of the WHO/HAI methodology. The analysis includes the cumulative percent markup, total cumulative percent markup, and percent contribution of individual components to the final medicine price in both public and private sector of Odisha state. Results: Add-on costs such as taxes, wholesale, and retail markups contribute substantially to the final price of medicines in private sector, particularly for branded-generic products. The largest contributor to add-on costs is at the level of retailer shop. Conclusion: Policy should be framed to achieve a greater transparency and uniformity of the pricing of medicines at different health sectors of Odisha. PMID:28458429

A quality-based cost model for new electronic systems and products

NASA Astrophysics Data System (ADS)

Shina, Sammy G.; Saigal, Anil

1998-04-01

This article outlines a method for developing a quality-based cost model for the design of new electronic systems and products. The model incorporates a methodology for determining a cost-effective design margin allocation for electronic products and systems and its impact on manufacturing quality and cost. A spreadsheet-based cost estimating tool was developed to help implement this methodology in order for the system design engineers to quickly estimate the effect of design decisions and tradeoffs on the quality and cost of new products. The tool was developed with automatic spreadsheet connectivity to current process capability and with provisions to consider the impact of capital equipment and tooling purchases to reduce the product cost.