ERIC Educational Resources Information Center
Buskirk, E. Drannon, Jr.
Presented is the instructor's manual for a one-hour presentation on cost-effectiveness analysis. Topics covered are the scope of cost-effectiveness analysis, basic assessment procedures, and the role of citizens in the analysis of alternatives. A supplementary audiovisual program is available. These materials are part of the Working for Clean…
Cost-Effectiveness and Cost-Benefit Analysis: Confronting the Problem of Choice.
ERIC Educational Resources Information Center
Clardy, Alan
Cost-effectiveness analysis and cost-benefit analysis are two related yet distinct methods to help decision makers choose the best course of action from among competing alternatives. For both types of analysis, costs are computed similarly. Costs may be reduced to present value amounts for multi-year programs, and parameters may be altered to show…
Instructional Cost Analysis: History and Present Inadequacies.
ERIC Educational Resources Information Center
Humphrey, David A.
The cost analysis of instruction is conducted according to principles of teaching and learning that have often become historically dated. Using today's costing systems prevents determination of whether cost effectiveness actually exists. The patterns of instruction in higher education and the systems employed for instructional cost analysis are…
Decision Making Methods in Space Economics and Systems Engineering
NASA Technical Reports Server (NTRS)
Shishko, Robert
2006-01-01
This viewgraph presentation reviews various methods of decision making and the impact that they have on space economics and systems engineering. Some of the methods discussed are: Present Value and Internal Rate of Return (IRR); Cost-Benefit Analysis; Real Options; Cost-Effectiveness Analysis; Cost-Utility Analysis; Multi-Attribute Utility Theory (MAUT); and Analytic Hierarchy Process (AHP).
Market Assessment of Forward-Looking Turbulence Sensing Systems
NASA Technical Reports Server (NTRS)
Kauffmann, Paul
2003-01-01
This viewgraph presentation provides a cost benefit analysis of three next-generation forward-looking turbulence sensing systems: X band turbulence radar system for convective turbulence, LIDAR based turbulence systems to sense clear air turbulence and a combined hybrid system. Parameters for the cost benefit analysis were established using a business model which considered injury rates, cost of injuries, indirect costs, market penetration rate estimates and product success characteristics. Topics covered include: study approach, business case equations, data acquisition, benchmark analysis. Data interpretation from the cost benefit analysis is presented. The researchers conclude that the market potential for these products is based primarily on injury cost reduction and that X band radar systems have the greatest chance for commercial success.
Cost Analysis of NEDU’s Helium Reclaimer.
1981-09-01
T ITLE (and Subtitle) S . TYPE OF REPORT 6 PERIOD COVERED COST ANALYSIS OF NEDU’S HELIUM RECLAIMER . Survey 6 . PERFORMING ORG. REPORT NUMSER 7...telephone conversation). 5. Charles T. Horngren , "Introduction tu Management Accounting " Fourth Edition. 3 . .4m mmnssmmlm~ • FIGURE 1 PRESENT, FUTURE AND...FEET COST OF PERIODIC MAINTENANCE OF HELIUM ELECTRIiC COST COST OF TOTAL RECLAIMED POWER NEW COST PRESENT WORTH YEAR N PER YEAR ( S /1000 FT
NASA Technical Reports Server (NTRS)
Stretchberry, D. M.; Hein, G. F.
1972-01-01
The general concepts of costing, budgeting, and benefit-cost ratio and cost-effectiveness analysis are discussed. The three common methods of costing are presented. Budgeting distributions are discussed. The use of discounting procedures is outlined. The benefit-cost ratio and cost-effectiveness analysis is defined and their current application to NASA planning is pointed out. Specific practices and techniques are discussed, and actual costing and budgeting procedures are outlined. The recommended method of calculating benefit-cost ratios is described. A standardized method of cost-effectiveness analysis and long-range planning are also discussed.
Course Cost Modelling in Australian Tertiary Education.
ERIC Educational Resources Information Center
Sharma, Raj
1986-01-01
A mathematical model for costing college courses, designed for purposes of accountability, subprogram cost analysis, marketing to foreign students (in Australia), and course cost analysis across institutions, is presented and discussed. (MSE)
Cost-effectiveness Analysis for Technology Acquisition.
Chakravarty, A; Naware, S S
2008-01-01
In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.
Costing the satellite power system
NASA Technical Reports Server (NTRS)
Hazelrigg, G. A., Jr.
1978-01-01
The paper presents a methodology for satellite power system costing, places approximate limits on the accuracy possible in cost estimates made at this time, and outlines the use of probabilistic cost information in support of the decision-making process. Reasons for using probabilistic costing or risk analysis procedures instead of standard deterministic costing procedures are considered. Components of cost, costing estimating relationships, grass roots costing, and risk analysis are discussed. Risk analysis using a Monte Carlo simulation model is used to estimate future costs.
The Process of Life Cycle Cost Analysis: Projecting Economic Consequences of Design Decisions
ERIC Educational Resources Information Center
AIA Journal, 1976
1976-01-01
Life-cycle cost analysis deals with both present and future costs and attempts to relate the two as a basis for making decisions. This article lays the groundwork for a better understanding of the techniques of life-cycle cost analysis. (Author/MLF)
Cost Analysis by Grade: A Better Way to Financial Management
ERIC Educational Resources Information Center
Donham, John O.
1973-01-01
Author presents a more effective manner for determining specific educational costs - cost analysis, whereby the cost of educating a student is decided grade by grade. Pro and con arguments are considered. (RK)
Cost-volume-profit and net present value analysis of health information systems.
McLean, R A
1998-08-01
The adoption of any information system should be justified by an economic analysis demonstrating that its projected benefits outweigh its projected costs. Analysis differ, however, on which methods to employ for such a justification. Accountants prefer cost-volume-profit analysis, and economists prefer net present value analysis. The article explains the strengths and weaknesses of each method and shows how they can be used together so that well-informed investments in information systems can be made.
A Business Of Security: Applying An Economic Model To Human Trafficking In Oregon
2016-12-01
presents policy analysis under a qualitative cost - benefit lens to assess economic model variables applied to state level policies. The conclusion is...modern slavery, sex trafficking, labor trafficking, Oregon, supply and demand, cost - benefit analysis 15. NUMBER OF PAGES 129 16. PRICE CODE 17...analyzing weaknesses and gaps. The thesis presents policy analysis under a qualitative cost - benefit lens to assess economic model variables applied to
The High/Scope Perry Preschool Program: Cost-Benefit Analysis Using Data from the Age-40 Followup
ERIC Educational Resources Information Center
Belfield, Clive R.; Nores, Milagros; Barnett, Steve; Schweinhart, Lawrence
2006-01-01
This paper presents an updated cost-benefit analysis of the High/Scope Perry preschool Program, using data on individuals aged 40. Children were randomly assigned to a treatment or control group. Program costs are compared against treatment impacts on educational resources, earnings, criminal activity, and welfare receipt. Net present values are…
Economics of liquid hydrogen from water electrolysis
NASA Technical Reports Server (NTRS)
Lin, F. N.; Moore, W. I.; Walker, S. W.
1985-01-01
An economical model for preliminary analysis of LH2 cost from water electrolysis is presented. The model is based on data from vendors and open literature, and is suitable for computer analysis of different scenarios for 'directional' purposes. Cost data associated with a production rate of 10,886 kg/day are presented. With minimum modification, the model can also be used to predict LH2 cost from any electrolyzer once the electrolyzer's cost data are available.
ERIC Educational Resources Information Center
Arora, Mehar
The study was directed toward developing a manual for establishing societal benefits and costs of vocational and manpower programs in Wisconsin. After first outlining the background of benefit-cost analysis, problems in establishing cost functions in education are presented along with some important cost concepts and uses of cost information in…
Economic Cost of Motor Vehicle Crashes, 1994
DOT National Transportation Integrated Search
1996-07-01
This report presents the results of an analysis of motor vehicle crash costs in 1994. The total economic cost of motor vehicle crashes in 1994 was $150.5 billion. This represents the present value of lifetime costs for 40,676 fatalities, 5.2 million ...
Evaluation of The Operational Benefits Versus Costs of An Automated Cargo Mover
2016-12-01
logistics footprint and life-cycle cost are presented as part of this report. Analysis of modeling and simulation results identified statistically...life-cycle cost are presented as part of this report. Analysis of modeling and simulation results identified statistically significant differences...Error of Estimation. Source: Eskew and Lawler (1994). ...........................75 Figure 24. Load Results (100 Runs per Scenario
Life support system cost study: Addendum to cost analysis of carbon dioxide concentrators
NASA Technical Reports Server (NTRS)
Yakut, M. M.
1973-01-01
New cost data are presented for the Hydrogen-Depolarized Carbon Dioxide Concentrator (HDC), based on modifying the concentrator to delete the quick disconnect valves and filters included in the system model defined in MDC-G4631. System description, cost data and a comparison between CO2 concentrator costs are presented.
Cost-benefit analysis of space technology
NASA Technical Reports Server (NTRS)
Hein, G. F.; Stevenson, S. M.; Sivo, J. N.
1976-01-01
A discussion of the implications and problems associated with the use of cost-benefit techniques is presented. Knowledge of these problems is useful in the structure of a decision making process. A methodology of cost-benefit analysis is presented for the evaluation of space technology. The use of the methodology is demonstrated with an evaluation of ion thrusters for north-south stationkeeping aboard geosynchronous communication satellites. A critique of the concept of consumers surplus for measuring benefits is also presented.
Cost analysis in support of minimum energy standards for clothes washers and dryers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1979-02-02
The results of the cost analysis of energy conservation design options for laundry products are presented. The analysis was conducted using two approaches. The first, is directed toward the development of industrial engineering cost estimates of each energy conservation option. This approach results in the estimation of manufacturers costs. The second approach is directed toward determining the market price differential of energy conservation features. The results of this approach are shown. The market cost represents the cost to the consumer. It is the final cost, and therefore includes distribution costs as well as manufacturing costs.
Cost Analysis of Online Courses. AIR 2000 Annual Forum Paper.
ERIC Educational Resources Information Center
Milam, John H., Jr.
This paper presents a complex, hybrid, method of cost analysis of online courses, which incorporates data on expenditures; student/course enrollment; departmental consumption/contribution; space utilization/opportunity costs; direct non-personnel costs; computing support; faculty/staff workload; administrative overhead at the department, dean, and…
Phase 1 of the automated array assembly task of the low cost silicon solar array project
NASA Technical Reports Server (NTRS)
Pryor, R. A.; Grenon, L. A.; Coleman, M. G.
1978-01-01
The results of a study of process variables and solar cell variables are presented. Interactions between variables and their effects upon control ranges of the variables are identified. The results of a cost analysis for manufacturing solar cells are discussed. The cost analysis includes a sensitivity analysis of a number of cost factors.
A cost analysis for the implementation of commonality in the family of commuter airplanes, revised
NASA Technical Reports Server (NTRS)
Creighton, Tom; Haddad, Rafael; Hendrich, Louis; Hensley, Doug; Morgan, Louise; Russell, Mark; Swift, Jerry
1987-01-01
The acquisition costs determined for the NASA family of commute airplanes are presented. The costs of the baseline designs are presented along with the calculated savings due to the commonality in the family. A sensitivity study is also presented to show the major drivers in the acquisition cost calculations. The baseline costs are calculated with the Nicolai method. A comparison is presented of the estimated costs for the commuter family with the actual price for existing commuters. The cost calculations for the engines and counter-rotating propellers are reported. The effects of commonality on acquisition costs are calculated. The sensitivity calculations of the cost to various costing parameters are shown. The calculations for the direct operating costs, with and without commonality are presented.
The Application of Cost-Benefit Analysis in Manpower Area.
ERIC Educational Resources Information Center
Barsby, Steven L.
The relative efficiency of various manpower programs as seen through cost-benefit analysis is assessed, and the contribution that cost-benefit analysis has made in evaluating manpower programs is discussed, taking into account a variety of methodologies presented in different studies. Vocational rehabilitation appears to yield the highest…
Consortium Purchases: Case Study for a Cost-Benefit Analysis.
ERIC Educational Resources Information Center
Scigliano, Marisa
2002-01-01
Discusses library cooperation and academic library consortia and presents a case study of a Canadian consortia that conducted a cost-benefit analysis for purchasing an electronic resource. Reports on member library subscription costs, external economic factors, value of patron time saved, costs and benefits for patrons, and net savings. (LRW)
Approaches to the Analysis of School Costs, an Introduction.
ERIC Educational Resources Information Center
Payzant, Thomas
A review and general discussion of quantitative and qualitative techniques for the analysis of economic problems outside of education is presented to help educators discover new tools for planning, allocating, and evaluating educational resources. The pamphlet covers some major components of cost accounting, cost effectiveness, cost-benefit…
Comparing Apples and Oranges: Does Cost-Effectiveness Analysis Deal Fairly with the Old and Young?
ERIC Educational Resources Information Center
Welch, H. Gilbert
1991-01-01
Considers role patient age plays in cost-effectiveness analysis. Quantifies magnitude of age bias and describes means to modify it. Present value analysis (discounting) is demonstrated to markedly attenuate effect of patient age on cost-effectiveness analysis. Explains how, as discount rate grows, difference in potential "life-years" between old…
ERIC Educational Resources Information Center
LaPlante, Josephine M.; Durham, Taylor R.
A revised edition of PS-14, "An Introduction to Benefit-Cost Analysis for Evaluating Public Programs," presents concepts and techniques of benefit-cost analysis as tools that can be used to assist in deciding between alternatives. The goals of the new edition include teaching students to think about the possible benefits and costs of each…
ECONOMIC ANALYSIS OF THE LONGTERM 2 ENHANCED ...
Presents an analysis of the projected costs and benefits of new drinking water regulation that will reduce exposure to disease-causing microorganisms in drinking water. Cost and benefit analysis LT2ESWTR
Spacelab experiment computer study. Volume 1: Executive summary (presentation)
NASA Technical Reports Server (NTRS)
Lewis, J. L.; Hodges, B. C.; Christy, J. O.
1976-01-01
A quantitative cost for various Spacelab flight hardware configurations is provided along with varied software development options. A cost analysis of Spacelab computer hardware and software is presented. The cost study is discussed based on utilization of a central experiment computer with optional auxillary equipment. Groundrules and assumptions used in deriving the costing methods for all options in the Spacelab experiment study are presented. The groundrules and assumptions, are analysed and the options along with their cost considerations, are discussed. It is concluded that Spacelab program cost for software development and maintenance is independent of experimental hardware and software options, that distributed standard computer concept simplifies software integration without a significant increase in cost, and that decisions on flight computer hardware configurations should not be made until payload selection for a given mission and a detailed analysis of the mission requirements are completed.
Quanbeck, Andrew; Lang, Katharine; Enami, Kohei; Brown, Richard L
2010-02-01
A previous cost-benefit analysis found Screening, Brief Intervention, and Referral to Treatment (SBIRT) to be cost-beneficial from a societal perspective. This paper develops a cost-benefit model that includes the employer's perspective by considering the costs of absenteeism and impaired presenteeism due to problem drinking. We developed a Monte Carlo simulation model to estimate the costs and benefits of SBIRT implementation to an employer. We first presented the likely costs of problem drinking to a theoretical Wisconsin firm that does not currently provide SBIRT services. We then constructed a cost-benefit model in which the firm funds SBIRT for its employees. The net present value of SBIRT adoption was computed by comparing costs due to problem drinking both with and without the program. When absenteeism and impaired presenteeism costs were considered from the employer's perspective, the net present value of SBIRT adoption was $771 per employee. We concluded that implementing SBIRT is cost-beneficial from the employer's perspective and recommend that Wisconsin employers consider covering SBIRT services for their employees.
Radiation Analysis for the Human Lunar Return Mission
NASA Technical Reports Server (NTRS)
Wilson, J. W.; Simonsen, L. C.; Shinn, J. L.; Kim, M.; Dubey, R. R.; Jordan, W.
1997-01-01
An analysis of the radiation hazards that are anticipated on an early Human Lunar Return (HLR) mission in support of NASA deep space exploration activities is presented. The HLR mission study emphasized a low cost lunar return to expand human capabilities in exploration, to answer fundamental science questions, and to seek opportunities for commercial development. As such, the radiation issues are cost related because the parasitic shield mass is expensive due to high launch costs. The present analysis examines the shield requirements and their impact on shield design.
Principles of cost-benefit analysis for ERTS experiments, volumes 1 and 2
NASA Technical Reports Server (NTRS)
1973-01-01
The basic elements of a cost-benefit study are discussed along with special considerations for ERTS experiments. Elements required for a complete economic analysis of ERTS are considered to be: statement of objectives, specification of assumptions, enumeration of system alternatives, benefit analysis, cost analysis nonefficiency considerations, and final system selection. A hypothetical cost-benefit example is presented with the assumed objective of an increase in remote sensing surveys of grazing lands to better utilize available forage to lower meat prices.
Economic effects of propulsion system technology on existing and future transport aircraft
NASA Technical Reports Server (NTRS)
Sallee, G. P.
1974-01-01
The results of an airline study of the economic effects of propulsion system technology on current and future transport aircraft are presented. This report represents the results of a detailed study of propulsion system operating economics. The study has four major parts: (1) a detailed analysis of current propulsion system maintenance with respect to the material and labor costs encountered versus years in service and the design characteristics of the major elements of the propulsion system of the B707, b727, and B747. (2) an analysis of the economic impact of a future representative 1979 propulsion system is presented with emphasis on depreciation of investment, fuel costs and maintenance costs developed on the basis of the analysis of the historical trends observed. (3) recommendations concerning improved methods of forecasting the maintenance cost of future propulsion systems are presented. A detailed method based on the summation of the projected labor and material repair costs for each major engine module and its installation along with a shorter form suitable for quick, less detailed analysis are presented, and (4) recommendations concerning areas where additional technology is needed to improve the economics of future commercial propulsion systems are presented along with the suggested economic benefits available from such advanced technology efforts.
ERIC Educational Resources Information Center
Cohen, Anat; Nachmias, Rafi
2009-01-01
This paper describes the implementation of a quantitative cost effectiveness analyzer for Web-supported academic instruction that was developed in Tel Aviv University during a long term study. The paper presents the cost effectiveness analysis of Tel Aviv University campus. Cost and benefit of 3,453 courses were analyzed, exemplifying campus-wide…
Economic analysis of transmission line engineering based on industrial engineering
NASA Astrophysics Data System (ADS)
Li, Yixuan
2017-05-01
The modern industrial engineering is applied to the technical analysis and cost analysis of power transmission and transformation engineering. It can effectively reduce the cost of investment. First, the power transmission project is economically analyzed. Based on the feasibility study of power transmission and transformation project investment, the proposal on the company system cost management is put forward through the economic analysis of the effect of the system. The cost management system is optimized. Then, through the cost analysis of power transmission and transformation project, the new situation caused by the cost of construction is found. It is of guiding significance to further improve the cost management of power transmission and transformation project. Finally, according to the present situation of current power transmission project cost management, concrete measures to reduce the cost of power transmission project are given from the two aspects of system optimization and technology optimization.
The economic impact of motor vehicle crashes, 2000
DOT National Transportation Integrated Search
2002-05-01
This report presents the results of an analysis of motor vehicle crash costs in the United State in the year 2000. The total economic cost of motor vehicle crashes in 2000 was $230.6 billion. This represents the present value of lifetime costs for 41...
Cost analysis of PET and comprehensive lifestyle modification for the reversal of atherosclerosis.
Delgado, Rigoberto I; Swint, J Michael; Lairson, David R; Johnson, Nils P; Gould, K Lance; Sdringola, Stefano
2014-01-01
We present a preliminary cost analysis of a combination intervention using PET and comprehensive lifestyle modification to reverse atherosclerosis. With a sensitivity of 92%-95% and specificity of 85%-95%, PET is an essential tool for high-precision diagnosis of coronary artery disease, accurately guiding optimal treatment for both symptomatic and asymptomatic patients. PET imaging provides a powerful visual and educational aid for helping patients identify and adopt appropriate treatments. However, little is known about the operational cost of using the technology for this purpose. The analysis was done in the context of the Century Health Study for Cardiovascular Medicine (Century Trial), a 1,300-patient, randomized study combining PET imaging with lifestyle changes. Our methodology included a microcosting and time study focusing on estimating average direct and indirect costs. The total cost of the Century Trial in present-value terms is $9.2 million, which is equal to $7,058 per patient. Sensitivity analysis indicates that the present value of total costs is likely to range between $8.8 and $9.7 million, which is equivalent to $6,655-$7,606 per patient. The clinical relevance of the Century Trial is significant since it is, to our knowledge, the first randomized controlled trial to combine high-precision imaging with lifestyle strategies. The Century Trial is in its second year of a 5-y protocol, and we present preliminary findings. The results of this cost study, however, provide policy makers with an early estimate of the costs of implementing, at large scale, a combined intervention such as the Century Trial. Further, we believe that imaging-guided lifestyle management may have considerable potential for improving outcomes and reducing health-care costs by eliminating unnecessary invasive procedures.
Educational Cost Analysis in Action: Case Studies for Planners -- I.
ERIC Educational Resources Information Center
Coombs, Philip H.; Hallak, Jacques
This document is the first in a series of three documents, which together contains 27 case studies on the uses of cost analysis in educational planning. The case studies have been presented to help planners and administrators see how cost analysis can be used to improve the efficiency of their educational systems, or how to get the best value from…
Educational Cost Analysis in Action: Case Studies for Planners -- III.
ERIC Educational Resources Information Center
Coombs, Philip H.; Hallak, Jacques
This document is the third in a series of three documents, which together contain 27 case studies on the uses of cost analysis in educational planning. The case studies have been presented to help planners and administrators see how cost analysis can be used to improve the efficiency of their educational systems, and to get the best value from…
Clinical Laboratory Automation: A Case Study.
Archetti, Claudia; Montanelli, Alessandro; Finazzi, Dario; Caimi, Luigi; Garrafa, Emirena
2017-04-13
This paper presents a case study of an automated clinical laboratory in a large urban academic teaching hospital in the North of Italy, the Spedali Civili in Brescia, where four laboratories were merged in a unique laboratory through the introduction of laboratory automation. The analysis compares the preautomation situation and the new setting from a cost perspective, by considering direct and indirect costs. It also presents an analysis of the turnaround time (TAT). The study considers equipment, staff and indirect costs. The introduction of automation led to a slight increase in equipment costs which is highly compensated by a remarkable decrease in staff costs. Consequently, total costs decreased by 12.55%. The analysis of the TAT shows an improvement of nonemergency exams while emergency exams are still validated within the maximum time imposed by the hospital. The strategy adopted by the management, which was based on re-using the available equipment and staff when merging the pre-existing laboratories, has reached its goal: introducing automation while minimizing the costs.
Benefit-Cost Analysis of the Perry Preschool Program and Its Policy Implications.
ERIC Educational Resources Information Center
Barnett, W. Steven
1985-01-01
Benefit-cost analysis is applied to the Perry Preschool Program and its long-term follow-up in order to examine preschool education as a social investment. The net present value of benefits and costs is positive, indicating that the program was a profitable social investment. (Author/LMO)
This report presents an analysis of the cost of using permeable reactive barriers to remediate contaminated ground water. When possible, these costs are compared with the cost of pump-and-treat technology for similar situations. Permeable reactive barriers are no longer perceiv...
1983-06-30
advantages and disadvantages of adher- ing to the conventions. This report presents the results of the cost- benefit analysis. The primary question...AD-A133 iii COST- BENEFIT ANALYSIS OF POSSIBLE US ADHERENCE TO TWO 114 INTERNATIONAL CONVE..(U) TEMPLE BARKER AND SLOANE INC LEXINGTON MA 30 JUN 83...Accession No. 3. Recipient’s Catalog No. CC-WER-83-1 4. Title and Subti e Cost- Benefit Analysis of possible U.S. S. Report Date Adherence to two
The costs of introducing a malaria vaccine through the expanded program on immunization in Tanzania.
Hutton, Guy; Tediosi, Fabrizio
2006-08-01
This report presents an approach to costing the delivery of a malaria vaccine through the expanded program on immunization (EPI), and presents the predicted cost per dose delivered and cost per fully immunized child (FIC) in Tanzania, which are key inputs to the cost-effectiveness analysis. The costs included in the analysis are those related to the purchase of the vaccine taking into account the wastage rate; the costs of distributing and storing the vaccine at central, zonal, district, and facility level; those of managing the vaccination program; the costs of delivery at facility level (including personnel, syringes, safety boxes, and waste management); and those of additional training of EPI personnel and of social mobilization activities. The average cost per FIC increases almost linearly from US 4.2 dollars per FIC at a vaccine price of US 1 dollars per dose to US 31.2 dollars at vaccine price of US 10 dollars per dose. The marginal cost is approximately 5% less than the average cost. Although the vaccine price still determines most of the total delivery costs, the analysis shows that other costs are relevant and should be taken into account before marketing the vaccine and planning its inclusion into the EPI.
Cost analysis of water recovery systems
NASA Technical Reports Server (NTRS)
Yakut, M. M.
1972-01-01
Cost and performance data from Gemini, Skylab, and other aerospace and biotechnology programs were analyzed to identify major cost elements required to establish cost estimating relationships for advanced life support subsystems for long range planning in support of earth orbital programs. Cost analysis are presented for five leading water reclamation systems; (1) RITE waste management-water system;(2) reverse osmosis system;(3) multifiltration system;(4) vapor compression system; and(5) closed air evaporation system with electrolytic pretreatment.
New technologies for solar energy silicon - Cost analysis of BCL process
NASA Technical Reports Server (NTRS)
Yaws, C. L.; Li, K.-Y.; Fang, C. S.; Lutwack, R.; Hsu, G.; Leven, H.
1980-01-01
New technologies for producing polysilicon are being developed to provide lower cost material for solar cells which convert sunlight into electricity. This article presents results for the BCL Process, which produces the solar-cell silicon by reduction of silicon tetrachloride with zinc vapor. Cost, sensitivity, and profitability analysis results are presented based on a preliminary process design of a plant to produce 1000 metric tons/year of silicon by the BCL Process. Profitability analysis indicates a sales price of $12.1-19.4 per kg of silicon (1980 dollars) at a 0-25 per cent DCF rate of return on investment after taxes. These results indicate good potential for meeting the goal of providing lower cost material for silicon solar cells.
Code of Federal Regulations, 2010 CFR
2010-10-01
... contract to the cost of an annual procurement approach, using a present value analysis. Do not award the multiyear contract unless the analysis shows that the multiyear contract will result in the lower cost (10 U...
How to interpret a healthcare economic analysis.
Brown, Melissa M; Brown, Gary C
2005-06-01
The purpose of the review is to present guidelines to help the clinician to interpret healthcare economic analyses and review pertinent recent analysis in the ophthalmic literature. There are four variants of healthcare economic analyses: (1) cost-minimization analysis; (2) cost-benefit analysis; (3) cost-effectiveness analysis and (4) cost-utility analysis. Cost-utility utility analysis has assumed an increasingly important role in healthcare, with increasing number of analyses occurring in the peer-reviewed ophthalmic literature. These include cost-utility analyses of cataract surgery in the first and second eyes, amblyopia treatment, and cost-utility analyses encompassing the vitreoretinal interventions of the following: (1) laser photocoagulation for exudative macular degeneration; (2) laser treatment for diabetic retinopathy; (3) laser photocoagulation for branch retinal vein obstruction; (4) diabetic vitrectomy; (5) treatment of proliferative retinopathy of prematurity and (6) treatment of retinal detachment associated with proliferative vitreoretinopathy. As an increasing number of cost-utility analyses become available they will provide the information system for the practice of value-based medicine, or medicine based upon the patient-perceived value conferred by interventions. Increasing numbers of cost-utility analysis in the ophthalmic literature suggest that ophthalmic interventions, including vitreoretinal interventions, are cost effective. Cost-utility analysis is a major tool in value-based medicine, the practice of medicine based upon the patient-perceived value conferred by healthcare interventions.
Laboratory cost control and financial management software.
Mayer, M
1998-02-09
Economical constraints within the health care system advocate the introduction of tighter control of costs in clinical laboratories. Detailed cost information forms the basis for cost control and financial management. Based on the cost information, proper decisions regarding priorities, procedure choices, personnel policies and investments can be made. This presentation outlines some principles of cost analysis, describes common limitations of cost analysis, and exemplifies use of software to achieve optimized cost control. One commercially available cost analysis software, LabCost, is described in some detail. In addition to provision of cost information, LabCost also serves as a general management tool for resource handling, accounting, inventory management and billing. The application of LabCost in the selection process of a new high throughput analyzer for a large clinical chemistry service is taken as an example for decisions that can be assisted by cost evaluation. It is concluded that laboratory management that wisely utilizes cost analysis to support the decision-making process will undoubtedly have a clear advantage over those laboratories that fail to employ cost considerations to guide their actions.
The Economics of [Not] Closing Small Rural Schools.
ERIC Educational Resources Information Center
Witham, Mark
This paper presents a preliminary analysis of the comparative costs and benefits of closing small rural schools in South Australia. The cost analysis includes accounting for the use of staff, goods, and services; distance education support; land and buildings; and the opportunity cost of children's bus travel time. The assumption that children's…
Considering a Cost Analysis Project? A Planned Approach
ERIC Educational Resources Information Center
Parish, Mina; Teetor, Travis
2006-01-01
As resources become more constrained in the library community, many organizations are finding that they need to have a better understanding of their costs. To this end, this article will present one approach to conducting a cost analysis (including questions to ask yourself, project team makeup, organizational support, and data organization). We…
Public and Private School Costs. A Local Analysis, 1994.
ERIC Educational Resources Information Center
Public Policy Forum, Inc., Milwaukee, WI.
This document presents findings of a study that identified key factors of cost-per-pupil differences between public and private school spending among selected Milwaukee area public and private schools. The analysis was limited to cost factors only, specifically, to per-pupil spending. Methodology included a review of the school budgets of 7 public…
Cost Efficiency in the University: A Departmental Evaluation Model
ERIC Educational Resources Information Center
Gimenez, Victor M.; Martinez, Jose Luis
2006-01-01
This article presents a model for the analysis of cost efficiency within the framework of data envelopment analysis models. It calculates the cost excess, separating a unit of production from its optimal or frontier levels, and, at the same time, breaks these excesses down into three explanatory factors: (a) technical inefficiency, which depends…
Space tug economic analysis study. Volume 3: Cost estimates
NASA Technical Reports Server (NTRS)
1972-01-01
Cost estimates for the space tug operation are presented. The subjects discussed are: (1) research and development costs, (2) investment costs, (3) operations costs, and (4) funding requirements. The emphasis is placed on the single stage tug configuration using various types of liquid propellants.
Life-cycle costs of high-performance cells
NASA Technical Reports Server (NTRS)
Daniel, R.; Burger, D.; Reiter, L.
1985-01-01
A life cycle cost analysis of high efficiency cells was presented. Although high efficiency cells produce more power, they also cost more to make and are more susceptible to array hot-spot heating. Three different computer analysis programs were used: SAMICS (solar array manufacturing industry costing standards), PVARRAY (an array failure mode/degradation simulator), and LCP (lifetime cost and performance). The high efficiency cell modules were found to be more economical in this study, but parallel redundancy is recommended.
Cost analysis of adjustments of the epidemiological surveillance system to mass gatherings.
Zieliński, Andrzej
2011-01-01
The article deals with the problem of economical analysis of public health activities at mass gatherings. After presentation of elementary review of basic economical approaches to cost analysis author tries to analyze applicability of those methods to planning of mass gatherings. Difficulties in comparability of different events and lack of the outcome data at the stage of planning make most of the economic approaches unsuitable to application at the planning stage. Even applicability of cost minimization analysis may be limited to comparison of predicted costs of preconceived standards of epidemiological surveillance. Cost effectiveness performed ex post after the event when both costs and obtained effects are known, may bring more information for future selection of most effective procedures.
U.S. Balance-of-Station Cost Drivers and Sensitivities (Presentation)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Maples, B.
2012-10-01
With balance-of-system (BOS) costs contributing up to 70% of the installed capital cost, it is fundamental to understanding the BOS costs for offshore wind projects as well as potential cost trends for larger offshore turbines. NREL developed a BOS model using project cost estimates developed by GL Garrad Hassan. Aspects of BOS covered include engineering and permitting, ports and staging, transportation and installation, vessels, foundations, and electrical. The data introduce new scaling relationships for each BOS component to estimate cost as a function of turbine parameters and size, project parameters and size, and soil type. Based on the new BOSmore » model, an analysis to understand the non‐turbine costs has been conducted. This analysis establishes a more robust baseline cost estimate, identifies the largest cost components of offshore wind project BOS, and explores the sensitivity of the levelized cost of energy to permutations in each BOS cost element. This presentation shows results from the model that illustrates the potential impact of turbine size and project size on the cost of energy from U.S. offshore wind plants.« less
Model reduction by weighted Component Cost Analysis
NASA Technical Reports Server (NTRS)
Kim, Jae H.; Skelton, Robert E.
1990-01-01
Component Cost Analysis considers any given system driven by a white noise process as an interconnection of different components, and assigns a metric called 'component cost' to each component. These component costs measure the contribution of each component to a predefined quadratic cost function. A reduced-order model of the given system may be obtained by deleting those components that have the smallest component costs. The theory of Component Cost Analysis is extended to include finite-bandwidth colored noises. The results also apply when actuators have dynamics of their own. Closed-form analytical expressions of component costs are also derived for a mechanical system described by its modal data. This is very useful to compute the modal costs of very high order systems. A numerical example for MINIMAST system is presented.
Ultimate Cost of Building Walls.
ERIC Educational Resources Information Center
Grimm, Clayford T.; Gross, James G.
The need for economic analysis of building walls is discussed, and the factors influencing the ultimate cost of exterior walls are studied. The present worth method is used to analyze three types of exterior non-loadbearing panel or curtain walls. Anticipated costs are expressed in terms of their present value per square foot of wall area. The…
Optimum Repair Level Analysis (ORLA) for the Space Transportation System (STS)
NASA Technical Reports Server (NTRS)
Henry, W. R.
1979-01-01
A repair level analysis method applied to a space shuttle scenario is presented. A determination of the most cost effective level of repair for reparable hardware, the location for the repair, and a system which will accrue minimum total support costs within operational and technical constraints over the system design are defined. The method includes cost equations for comparison of selected costs to completion for assumed repair alternates.
Aigner, R; Meier Fedeler, T; Eschbach, D; Hack, J; Bliemel, C; Ruchholtz, S; Bücking, B
2016-12-01
The aim of the present study was to identify patient factors associated with higher costs in hip fracture patients. The mean costs of a prospectively observed sample of 402 patients were 8853 €. The ASA score, Charlson comorbidity index, and fracture location were associated with increased costs. Fractures of the proximal end of the femur (hip fractures) are of increasing incidence due to demographic changes. Relevant co-morbidities often present in these patients cause high complication rates and prolonged hospital stays, thus leading to high costs of acute care. The aim of this study was to perform a precise cost analysis of the actual hospital costs of hip fractures and to identify patient factors associated with increased costs. The basis of this analysis was a prospectively observed single-center trial, which included 402 patients with fractures of the proximal end of the femur. All potential cost factors were recorded as accurately as possible for each of the 402 patients individually, and statistical analysis was performed to identify associations between pre-existing patient factors and acute care costs. The mean total acute care costs per patient were 8853 ± 5676 € with ward costs (5828 ± 4294 €) and costs for surgical treatment (1972 ± 956 €) representing the major cost factors. The ASA score, Charlson comorbidity index, and fracture location were identified as influencing the costs of acute care for hip fracture treatment. Hip fractures are associated with high acute care costs. This study underlines the necessity of sophisticated risk-adjusted payment models based on specific patient factors. Economic aspects should be an integral part of future hip fracture research due to limited health care resources.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, Lijuan; Gonder, Jeff; Burton, Evan
This study evaluates the costs and benefits associated with the use of a stationary-wireless- power-transfer-enabled plug-in hybrid electric bus and determines the cost effectiveness relative to a conventional bus and a hybrid electric bus. A sensitivity sweep was performed over many different battery sizes, charging power levels, and number/location of bus stop charging stations. The net present cost was calculated for each vehicle design and provided the basis for design evaluation. In all cases, given the assumed economic conditions, the conventional bus achieved the lowest net present cost while the optimal plug-in hybrid electric bus scenario beat out the hybridmore » electric comparison scenario. The study also performed parameter sensitivity analysis under favorable and high unfavorable market penetration assumptions. The analysis identifies fuel saving opportunities with plug-in hybrid electric bus scenarios at cumulative net present costs not too dissimilar from those for conventional buses.« less
Cost analysis of a coal-fired power plant using the NPV method
NASA Astrophysics Data System (ADS)
Kumar, Ravinder; Sharma, Avdhesh Kr.; Tewari, P. C.
2015-12-01
The present study investigates the impact of various factors affecting coal-fired power plant economics of 210 MW subcritical unit situated in north India for electricity generation. In this paper, the cost data of various units of thermal power plant in terms of power output capacity have been fitted using power law with the help of the data collected from a literature search. To have a realistic estimate of primary components or equipment, it is necessary to include the latest cost of these components. The cost analysis of the plant was carried out on the basis of total capital investment, operating cost and revenue. The total capital investment includes the total direct plant cost and total indirect plant cost. Total direct plant cost involves the cost of equipment (i.e. boiler, steam turbine, condenser, generator and auxiliary equipment including condensate extraction pump, feed water pump, etc.) and other costs associated with piping, electrical, civil works, direct installation cost, auxiliary services, instrumentation and controls, and site preparation. The total indirect plant cost includes the cost of engineering and set-up. The net present value method was adopted for the present study. The work presented in this paper is an endeavour to study the influence of some of the important parameters on the lifetime costs of a coal-fired power plant. For this purpose, parametric study with and without escalation rates for a period of 35 years plant life was evaluated. The results predicted that plant life, interest rate and the escalation rate were observed to be very sensitive on plant economics in comparison to other factors under study.
Comprehensive risk analysis for structure type selection.
DOT National Transportation Integrated Search
2010-04-01
Optimization of bridge selection and design traditionally has been sought in terms of the finished structure. This study presents a : more comprehensive risk-based analysis that includes user costs and accidents during the construction phase. Costs f...
The chronic care model versus disease management programs: a transaction cost analysis approach.
Leeman, Jennifer; Mark, Barbara
2006-01-01
The present article applies transaction cost analysis as a framework for better understanding health plans' decisions to improve chronic illness management by using disease management programs versus redesigning care within physician practices.
7 CFR 1710.303 - Power cost studies-power supply borrowers.
Code of Federal Regulations, 2010 CFR
2010-01-01
... contracts or revisions to existing contracts, and an analysis of the effects on power costs; (4) Use of sensitivity analyses to determine the vulnerability of the alternatives to a reasonable range of assumptions... conservation alternatives as set forth in §§ 1710.253 and 1710.254; (2) A present-value analysis of the costs...
Flat plate vs. concentrator solar photovoltaic cells - A manufacturing cost analysis
NASA Technical Reports Server (NTRS)
Granon, L. A.; Coleman, M. G.
1980-01-01
The choice of which photovoltaic system (flat plate or concentrator) to use for utilizing solar cells to generate electricity depends mainly on the cost. A detailed, comparative manufacturing cost analysis of the two types of systems is presented. Several common assumptions, i.e., cell thickness, interest rate, power rate, factory production life, polysilicon cost, and direct labor rate are utilized in this analysis. Process sequences, cost variables, and sensitivity analyses have been studied, and results of the latter show that the most important parameters which determine manufacturing costs are concentration ratio, manufacturing volume, and cell efficiency. The total cost per watt of the flat plate solar cell is $1.45, and that of the concentrator solar cell is $1.85, the higher cost being due to the increased process complexity and material costs.
Cost analysis of Navy acquisition alternatives for the NAVSTAR Global Positioning System
NASA Astrophysics Data System (ADS)
Darcy, T. F.; Smith, G. P.
1982-12-01
This research analyzes the life cycle cost (LCC) of the Navy's current and two hypothetical procurement alternatives for NAVSTAR Global Positioning System (GPS) user equipment. Costs are derived by the ARINC Research Corporation ACBEN cost estimating system. Data presentation is in a comparative format describing individual alternative LCC and differential costs between alternatives. Sensitivity analysis explores the impact receiver-processor unit (RPU) first unit production cost has on individual alternative LCC, as well as cost differentials between each alternative. Several benefits are discussed that might provide sufficient cost savings and/or system effectiveness improvements to warrant a procurement strategy other than the existing proposal.
Design integration for minimal energy and cost
DOE Office of Scientific and Technical Information (OSTI.GOV)
Halldane, J.E.
The authors present requirements for creating alternative energy conserving designs including energy management and architectural, plumbing, mechanical, electrical, electronic and optical design. Parameters of power, energy, life cycle costs and benefit for resource for an evaluation by the interested parties are discussed. They present an analysis of power systems through a seasonal power distribution diagram. An analysis of cost systems includes capital cost from the power components, annual costs from the utility energy use, and finance costs with loans, taxes, settlement and design fees. Equations are transposed to the evaluative parameter and are uniquely explicit with consistent symbols, parameter definitions,more » dual and balanced units, unit conversions, criteria for operation, incorporated constants for rapid calculations, references to data in the handbook, other common terms, and instrumentation for the measurement. Each component equation has a key power diagram.« less
This presentation will cover the new cost estimation module of the US EPA National Stormwater Calculator and future enhancements, including a new mobile web app version of the tool. The presentation mainly focuses on how the calculator may be used to provide planning level capita...
Space biology initiative program definition review. Trade study 4: Design modularity and commonality
NASA Technical Reports Server (NTRS)
Jackson, L. Neal; Crenshaw, John, Sr.; Davidson, William L.; Herbert, Frank J.; Bilodeau, James W.; Stoval, J. Michael; Sutton, Terry
1989-01-01
The relative cost impacts (up or down) of developing Space Biology hardware using design modularity and commonality is studied. Recommendations for how the hardware development should be accomplished to meet optimum design modularity requirements for Life Science investigation hardware will be provided. In addition, the relative cost impacts of implementing commonality of hardware for all Space Biology hardware are defined. Cost analysis and supporting recommendations for levels of modularity and commonality are presented. A mathematical or statistical cost analysis method with the capability to support development of production design modularity and commonality impacts to parametric cost analysis is provided.
van den Berg, Ineke; Kaandorp, Guido C; Bosch, Johanna L; Duvekot, Johannes J; Arends, Lidia R; Hunink, M G Myriam
2010-04-01
To assess, using a modelling approach, the effectiveness and costs of breech version with acupuncture-type interventions on BL67 (BVA-T), including moxibustion, compared to expectant management for women with a foetal breech presentation at 33 weeks gestation. A decision tree was developed to predict the number of caesarean sections prevented by BVA-T compared to expectant management to rectify breech presentation. The model accounted for external cephalic versions (ECV), treatment compliance, and costs for 10,000 simulated breech presentations at 33 weeks gestational age. Event rates were taken from Dutch population data and the international literature, and the relative effectiveness of BVA-T was based on a specific meta-analysis. Sensitivity analyses were conducted to evaluate the robustness of the results. We calculated percentages of breech presentations at term, caesarean sections, and costs from the third-party payer perspective. Odds ratios (OR) and cost differences of BVA-T versus expectant management were calculated. (Probabilistic) sensitivity analysis and expected value of perfect information analysis were performed. The simulated outcomes demonstrated 32% breech presentations after BVA-T versus 53% with expectant management (OR 0.61, 95% CI 0.43, 0.83). The percentage caesarean section was 37% after BVA-T versus 50% with expectant management (OR 0.73, 95% CI 0.59, 0.88). The mean cost-savings per woman was euro 451 (95% CI euro 109, euro 775; p=0.005) using moxibustion. Sensitivity analysis showed that if 16% or more of women offered moxibustion complied, it was more effective and less costly than expectant management. To prevent one caesarean section, 7 women had to use BVA-T. The expected value of perfect information from further research was euro0.32 per woman. The results suggest that offering BVA-T to women with a breech foetus at 33 weeks gestation reduces the number of breech presentations at term, thus reducing the number of caesarean sections, and is cost-effective compared to expectant management, including external cephalic version. Copyright (c) 2010 Elsevier Ltd. All rights reserved.
Economic analysis of new space transportation systems: Executive summary
NASA Technical Reports Server (NTRS)
1971-01-01
An economic analysis of alternative space transportation systems is presented. Results indicate that the expendable systems represent modest investments, but the recurring costs of operation would remain high. The space shuttle and tug system requires a substantial investment, but would substantially reduce the recurring costs of operation. Economic benefits and costs of the different systems are also analyzed. Findings are summarized.
Minnesota urban partnership agreement national evaluation : cost benefit analysis test plan.
DOT National Transportation Integrated Search
2009-11-17
This report presents the cost benefit analysis test plan for the Minnesota Urban Partnership Agreement (UPA) under the United States Department of Transportation (U.S. DOT) UPA Program. The Minnesota UPA projects focus on reducing congestion by emplo...
Preliminary Limited Surveillance Radar (LSR) Cost/Benefit Analysis
DOT National Transportation Integrated Search
1977-10-01
This report presents the findings of a cost/benefit analysis of the deployment of a new Limited Surveillance Radar (LSR). An LSR is an inexpensive, single channel, short-range (about 20 miles), primary radar for use at approach control facilities whi...
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1997-08-01
The emergence of competitive markets for electricity generation services is changing the way that electricity is and will be priced in the United States. This report presents the results of an analysis that focuses on two questions: (1) How are prices for competitive generation services likely to differ from regulated prices if competitive prices are based on marginal costs rather than regulated {open_quotes}cost-of-service{close_quotes} pricing? (2) What impacts will the competitive pricing of generation services (based on marginal costs) have on electricity consumption patterns, production costs, and the financial integrity patterns, production costs, and the financial integrity of electricity suppliers? Thismore » study is not intended to be a cost-benefit analysis of wholesale or retail competition, nor does this report include an analysis of the macroeconomic impacts of competitive electricity prices.« less
D'Onza, Giuseppe; Greco, Giulio; Allegrini, Marco
2016-02-01
Recycling implies additional costs for separated municipal solid waste (MSW) collection. The aim of the present study is to propose and implement a management tool - the full cost accounting (FCA) method - to calculate the full collection costs of different types of waste. Our analysis aims for a better understanding of the difficulties of putting FCA into practice in the MSW sector. We propose a FCA methodology that uses standard cost and actual quantities to calculate the collection costs of separate and undifferentiated waste. Our methodology allows cost efficiency analysis and benchmarking, overcoming problems related to firm-specific accounting choices, earnings management policies and purchase policies. Our methodology allows benchmarking and variance analysis that can be used to identify the causes of off-standards performance and guide managers to deploy resources more efficiently. Our methodology can be implemented by companies lacking a sophisticated management accounting system. Copyright © 2015 Elsevier Ltd. All rights reserved.
Cazarim, Maurílio de Souza; Pereira, Leonardo Régis Leira
2018-01-01
Only 20% of patients with systemic arterial hypertension (SAH) have blood pressure within recommended parameters. SAH has been the main risk factor for morbidity and mortality of cardiovascular diseases, which affects the burden of the Public Health System (PHS). Some studies have shown the effectiveness of Pharmaceutical Care (PC) in the care of hypertensive patients. To perform a cost-effectiveness analysis to compare SAH treatment with PC management and conventional treatment for hypertensive patients offered by the PHS. A cost-effectiveness study nested to a quasi-experimental study was conducted, in which 104 hypertensive patients were followed up in a PC program. Blood pressure control was considered as the outcome for the economic analysis and the costs were direct and non-direct medical costs. PC was dominant for two years in the post-PC period compared with the pre-PC year. The mean cost effectiveness ratio (CER) for the CERPre-PC, CERPC, and CERPost-PC periods were: US$ 364.65, US$ 415.39, and US$ 231.14 respectively. The incremental cost effectiveness ratio (ICER) analysis presented ICER of US$ 478.41 in the PC period and US$ 42.95 in the post PC period. Monte Carlo sensitivity analysis presented mean ICERPC and ICERPost-PC equal to US$ 605.09 and US$ 128.03, reaching US$ 1,725.00 and US$ 740.00 respectively. Even for the highest ICER, the values were below the cost effectiveness threshold, which means that PC was a cost effective strategy for the care of hypertensive patients in the PHS.
NASA Technical Reports Server (NTRS)
Zapata, Edgar
2012-01-01
This paper presents past and current work in dealing with indirect industry and NASA costs when providing cost estimation or analysis for NASA projects and programs. Indirect costs, when defined as those costs in a project removed from the actual hardware or software hands-on labor; makes up most of the costs of today's complex large scale NASA space/industry projects. This appears to be the case across phases from research into development into production and into the operation of the system. Space transportation is the case of interest here. Modeling and cost estimation as a process rather than a product will be emphasized. Analysis as a series of belief systems in play among decision makers and decision factors will also be emphasized to provide context.
Chang, Song; Xie, Jiushu; Li, Li; Wang, Ruiming; Liu, Ming
2016-01-01
Switch costs are generally found in language switching tasks. However, the locus where switch costs occur during bilingual language production remains unclear. Several studies that used a cued language-switching paradigm have attempted to investigate this question in bilingual language production, but researchers have not reached a consensus. Moreover, we are interested in where switch costs occur when language selection occurs after lemma activation. Previous studies have not investigated this question because most previous studies presented language cues before or along with the stimuli. Therefore, we used a modified cued language-switching paradigm with a combined event-related potentials (ERPs) technique to explore the locus of switch costs during bilingual language production. The cue and stimulus were separated and presented in two different presentation sequences in which Indonesian-Chinese bilingual speakers were instructed to name digits in their L1 or L2 according to the color of the cue. The ERPs related to the cue and stimulus for two presentation sequences were measured. In the stimulus-cue sequence, the analysis that was time-locked to cues revealed a reversed switch cost as early as 220 ms after the cue onset; furthermore, a switch cost was shown in L1 with a late stage post-cue onset. The results suggested that when language selection occurred after lemma activation, the switch costs mainly occurred at the lemma selection stage. In the cue-stimulus sequence, the analysis that was time-locked to cues did not reveal significant main effects of switching, whereas the analysis that was time-locked to digits yielded a switch cost, again indicating that switch costs mainly occurred at the lemma selection stage rather than at the language task schema competition stage. Overall, our results indicated that when bilinguals spoke digits aloud in the language switching task, switch costs mainly occurred at the lemma selection stage.
Hameed, Ahmed S; Modre-Osprian, Robert; Schreier, Günter
2017-01-01
Increasing treatment costs of HF patients affect the initiation of appropriate treatment method. Divergent approaches to measure the costs of treatment and the lack of common cost indicators impede the comparison of therapy settings. In the context of the present meta-analysis, key cost indicators from the perspective of healthcare providers are to be identified, described, analyzed and quantified. This review helps narrowing down the cost indicators, which have the most significant economic impact on the total treatment costs of HF patients. Telemedical services are to be compared to standard therapy methods. The identification process was based on several steps. For the quantitative synthesis, we used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. An additional set of criteria was defined for the following qualitative analysis. 5 key cost indicators were identified with significant economic impact on the treatment costs of HF patients. 95% of the reported treatment costs could be captured based on the identified cost indicators.
Nurse manager succession planning: A cost-benefit analysis.
Phillips, Tracy; Evans, Jennifer L; Tooley, Stephanie; Shirey, Maria R
2018-03-01
This commentary presents a cost-benefit analysis to advocate for the use of succession planning to mitigate the problems ensuing from nurse manager turnover. An estimated 75% of nurse managers will leave the workforce by 2020. Many benefits are associated with proactively identifying and developing internal candidates. Fewer than 7% of health care organisations have implemented formal leadership succession planning programmes. A cost-benefit analysis of a formal succession-planning programme from one hospital illustrates the benefits of the programme in their organisation and can be replicated easily. Assumptions of nursing manager succession planning cost-benefit analysis are identified and discussed. The succession planning exemplar demonstrates the integration of cost-benefit analysis principles. Comparing the costs of a formal nurse manager succession planning strategy with the status quo results in a positive cost-benefit ratio. The implementation of a formal nurse manager succession planning programme effectively reduces replacement costs and time to transition into the new role. This programme provides an internal pipeline of future leaders who will be more successful than external candidates. Using an actual cost-benefit analysis equips nurse managers with valuable evidence depicting succession planning as a viable business strategy. © 2017 John Wiley & Sons Ltd.
Economic analysis of cancer treatment costs: another tool for oncology managers.
Chirikos, T N; Ruckdeschel, J C; Krischer, J P
2001-01-01
Oncology managers increasingly need more information about how much and why treatment costs vary across cancer patients. In response to this need, our Center is building an analytic capacity for investigating economic aspects of cancer treatment. Economic analysis is characterized by a simultaneous consideration of treatment costs and outcomes; it focuses on how treatment cost/outcome ratios vary across patient populations with similar diseases. In this paper, we present an overview of our work, with special emphasis on the measurement of outcomes and the inputs or costs of treatment, the variability of cost/outcome ratios, and the analysis of the factors that predict or explain this observed variation. We illustrate how the analysis is conducted, set out selected results relating to lung and breast cancer patients, and assess some of the advantages and disadvantages of the approach. Among other things, we conclude that economic analysis of cancer treatment costs is feasible and that it can provide useful data for managerial decision making.
Preliminary Cost Model for Space Telescopes
NASA Technical Reports Server (NTRS)
Stahl, H. Philip; Prince, F. Andrew; Smart, Christian; Stephens, Kyle; Henrichs, Todd
2009-01-01
Parametric cost models are routinely used to plan missions, compare concepts and justify technology investments. However, great care is required. Some space telescope cost models, such as those based only on mass, lack sufficient detail to support such analysis and may lead to inaccurate conclusions. Similarly, using ground based telescope models which include the dome cost will also lead to inaccurate conclusions. This paper reviews current and historical models. Then, based on data from 22 different NASA space telescopes, this paper tests those models and presents preliminary analysis of single and multi-variable space telescope cost models.
A Cost-Benefit Study of a Breaking the Cycle Program for Juveniles
ERIC Educational Resources Information Center
Cowell, Alexander J.; Lattimore, Pamela K.; Krebs, Christopher P.
2010-01-01
The authors present a cost-benefit analysis of a Juvenile Breaking the Cycle (JBTC) program in Oregon designed to provide juvenile justice system monitoring and coordinated treatment and services to youth who are assessed as at high risk for recidivism and substance use. Detailed cost analyses are presented for youth in the JBTC program and a…
Incorporating psychological influences in probabilistic cost analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kujawski, Edouard; Alvaro, Mariana; Edwards, William
2004-01-08
Today's typical probabilistic cost analysis assumes an ''ideal'' project that is devoid of the human and organizational considerations that heavily influence the success and cost of real-world projects. In the real world ''Money Allocated Is Money Spent'' (MAIMS principle); cost underruns are rarely available to protect against cost overruns while task overruns are passed on to the total project cost. Realistic cost estimates therefore require a modified probabilistic cost analysis that simultaneously models the cost management strategy including budget allocation. Psychological influences such as overconfidence in assessing uncertainties and dependencies among cost elements and risks are other important considerations thatmore » are generally not addressed. It should then be no surprise that actual project costs often exceed the initial estimates and are delivered late and/or with a reduced scope. This paper presents a practical probabilistic cost analysis model that incorporates recent findings in human behavior and judgment under uncertainty, dependencies among cost elements, the MAIMS principle, and project management practices. Uncertain cost elements are elicited from experts using the direct fractile assessment method and fitted with three-parameter Weibull distributions. The full correlation matrix is specified in terms of two parameters that characterize correlations among cost elements in the same and in different subsystems. The analysis is readily implemented using standard Monte Carlo simulation tools such as {at}Risk and Crystal Ball{reg_sign}. The analysis of a representative design and engineering project substantiates that today's typical probabilistic cost analysis is likely to severely underestimate project cost for probability of success values of importance to contractors and procuring activities. The proposed approach provides a framework for developing a viable cost management strategy for allocating baseline budgets and contingencies. Given the scope and magnitude of the cost-overrun problem, the benefits are likely to be significant.« less
Dor, Avi; Luo, Qian; Gerstein, Maya Tuchman; Malveaux, Floyd; Mitchell, Herman; Markus, Anne Rossier
We present an incremental cost-effectiveness analysis of an evidence-based childhood asthma intervention (Community Healthcare for Asthma Management and Prevention of Symptoms [CHAMPS]) to usual management of childhood asthma in community health centers. Data used in the analysis include household surveys, Medicaid insurance claims, and community health center expenditure reports. We combined our incremental cost-effectiveness analysis with a difference-in-differences multivariate regression framework. We found that CHAMPS reduced symptom days by 29.75 days per child-year and was cost-effective (incremental cost-effectiveness ratio: $28.76 per symptom-free days). Most of the benefits were due to reductions in direct medical costs. Indirect benefits from increased household productivity were relatively small.
Cost-benefit analysis - noise barriers and quieter pavements
DOT National Transportation Integrated Search
2014-01-01
This report presents the results of one TQA Follow-up event, a workshop titled Cost Benefit Analysis Noise Barriers and Quieter Pavements, which was organized by the DOT Volpe Center and hosted by the NAE at the National Academies Keck Center, Wa...
Engineering Cost Analysis of the Urban-Tracked Air Cushion Vehicle System
DOT National Transportation Integrated Search
1972-01-01
The Urban Tracked Air Cushion Vehicle (UTACV) is presently being developed as a means of improving urban transportation. This report covers the development of a cost analysis conducted for the UTACV. The report covers the development of a computer pr...
Cost Of Compliance On Munitions Consolidation From Lualualei To West Loch
2017-12-01
from the perspective of the Department of Defense in order to capture all costs and benefits associated with the Army and Navy, the main stakeholders...weaknesses of the available alternative options. The model identifies tangible costs and benefits to estimate a net present value for each option. To...the robustness of the average net present value and to show the probability of net costs exceeding the net benefits . The analysis conducted in this
Economics of human performance and systems total ownership cost.
Onkham, Wilawan; Karwowski, Waldemar; Ahram, Tareq Z
2012-01-01
Financial costs of investing in people is associated with training, acquisition, recruiting, and resolving human errors have a significant impact on increased total ownership costs. These costs can also affect the exaggerate budgets and delayed schedules. The study of human performance economical assessment in the system acquisition process enhances the visibility of hidden cost drivers which support program management informed decisions. This paper presents the literature review of human total ownership cost (HTOC) and cost impacts on overall system performance. Economic value assessment models such as cost benefit analysis, risk-cost tradeoff analysis, expected value of utility function analysis (EV), growth readiness matrix, multi-attribute utility technique, and multi-regressions model were introduced to reflect the HTOC and human performance-technology tradeoffs in terms of the dollar value. The human total ownership regression model introduces to address the influencing human performance cost component measurement. Results from this study will increase understanding of relevant cost drivers in the system acquisition process over the long term.
Chang, Wei-Yew; Lantz, Van A; Hennigar, Chris R; MacLean, David A
2012-01-01
This study employs a benefit-cost analysis framework to estimate market and non-market benefits and costs of controlling future spruce budworm (Choristoneura fumiferana) outbreaks on Crown forest lands in New Brunswick, Canada. We used: (i) an advanced timber supply model to project potential timber volume saved, timber value benefits, and costs of pest control efforts; and (ii) a recent contingent valuation method analysis that evaluated non-market benefits (i.e., changes in recreation opportunities and existence values) of controlling future spruce budworm outbreaks in the Province. A total of six alternative scenarios were evaluated, including two uncontrolled future budworm outbreak severities (moderate vs. severe) and, for each severity, three control program levels (protecting 10%, 20%, or 40% of the susceptible Crown land forest area). The economic criteria used to evaluate each scenario included benefit-cost ratios and net present values. Under severe outbreak conditions, results indicated that the highest benefit-cost ratio (4.04) occurred when protecting 10% (284,000 ha) of the susceptible area, and the highest net present value ($111 M) occurred when protecting 20% (568,000 ha) of the susceptible area. Under moderate outbreak conditions, the highest benefit-cost ratio (3.24) and net present value ($58.7 M) occurred when protecting 10% (284,000 ha) of the susceptible area. Inclusion of non-market values generally increased the benefit-cost ratios and net present values of the control programs, and in some cases, led to higher levels of control being supported. Results of this study highlight the importance of including non-market values into the decision making process of forest pest management. Copyright © 2011 Elsevier Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
1981-01-01
The manufacturing cost of a General Electric 12 meter diameter concentrator was estimated. This parabolic dish concentrator for solar thermal system was costed in annual production volumes of 100 - 1,000 - 5,000 - 10,000 - 50,000 100,000 - 400,000 and 1,000,000 units. Presented for each volume are the costs of direct labor, material, burden, tooling, capital equipment and buildings. Also presented is the direct labor personnel and factory space requirements. All costs are based on early 1981 economics.
Operating Dedicated Data Centers - Is It Cost-Effective?
NASA Astrophysics Data System (ADS)
Ernst, M.; Hogue, R.; Hollowell, C.; Strecker-Kellog, W.; Wong, A.; Zaytsev, A.
2014-06-01
The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.
We present a framework to compare water treatment costs to source water protection costs, an important knowledge gap for drinking water treatment plants (DWTPs). This trade-off helps to determine what incentives a DWTP has to invest in natural infrastructure or pollution reductio...
Air Force Reusable Booster System A Quick-look, Design Focused Modeling and Cost Analysis Study
NASA Technical Reports Server (NTRS)
Zapata, Edgar
2011-01-01
Presents work supporting the Air force Reusable Booster System (RBS) - A Cost Study with Goals as follows: Support US launch systems decision makers, esp. in regards to the research, technology and demonstration investments required for reusable systems to succeed. Encourage operable directions in Reusable Booster / Launch Vehicle Systems technology choices, system design and product and process developments. Perform a quick-look cost study, while developing a cost model for more refined future analysis.
DOT National Transportation Integrated Search
2012-08-01
This report presents the test plan for conducting the Benefit-Cost Analysis (BCA) for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. The ICM project...
Wennhall, Inger; Norlund, Anders; Matsson, Lars; Twetman, Svante
2010-01-01
The aim was to calculate the total and the net costs per child included in a 3-year caries preventive program for preschool children and to make estimates of expected lowest and highest costs in a sensitivity analysis. The direct costs for prevention and dental care were applied retrospectively to a comprehensive oral health outreach project for preschool children conducted in a low-socioeconomic multi-cultural urban area. The outcome was compared with historical controls from the same area with conventional dental care. The cost per minute for the various dental professions was added to the cost of materials, rental facilities and equipment based on accounting data. The cost for fillings was extracted from a specified per diem list. Overhead costs were assumed to correspond to 50% of salaries and all costs were calculated as net present value per participating child in the program and expressed in Euro. The results revealed an estimated total cost of 310 Euro per included child (net present value) in the 3-year program. Half of the costs were attributed to the first year of the program and the costs of manpower constituted 45% of the total costs. When the total cost was reduced with the cost of conventional care and the revenue of avoided fillings, the net cost was estimated to 30 Euro. A sensitivity analysis displayed that a net gain could be possible with a maximal outcome of the program. In conclusion, the estimated net costs were displayed and available to those considering implementation of a similar population-based preventive program in areas where preschool children are at high caries risk.
Present-value analysis: A systems approach to public decisionmaking for cost effectiveness
NASA Technical Reports Server (NTRS)
Herbert, T. T.
1971-01-01
Decision makers within Governmental agencies and Congress must evaluate competing (and sometimes conflicting) proposals which seek funding and implementation. Present value analysis can be an effective decision making tool by enabling the formal evaluation of the effects of competing proposals on efficient national resource utilization. A project's costs are not only its direct disbursements, but its social costs as well. How much does it cost to have those funds diverted from their use and economic benefit by the private sector to the public project? Comparisons of competing projects' social costs allow decision makers to expand their decision bases by quantifying the projects' impacts upon the economy and the efficient utilization of the country's limited national resources. A conceptual model is established for the choosing of the appropriate discount rate to be used in evaluation decisions through the technique.
Economic analysis of the space shuttle system, volume 1
NASA Technical Reports Server (NTRS)
1972-01-01
An economic analysis of the space shuttle system is presented. The analysis is based on economic benefits, recurring costs, non-recurring costs, and ecomomic tradeoff functions. The most economic space shuttle configuration is determined on the basis of: (1) objectives of reusable space transportation system, (2) various space transportation systems considered and (3) alternative space shuttle systems.
Barber, Julie A; Thompson, Simon G
1998-01-01
Objective To review critically the statistical methods used for health economic evaluations in randomised controlled trials where an estimate of cost is available for each patient in the study. Design Survey of published randomised trials including an economic evaluation with cost values suitable for statistical analysis; 45 such trials published in 1995 were identified from Medline. Main outcome measures The use of statistical methods for cost data was assessed in terms of the descriptive statistics reported, use of statistical inference, and whether the reported conclusions were justified. Results Although all 45 trials reviewed apparently had cost data for each patient, only 9 (20%) reported adequate measures of variability for these data and only 25 (56%) gave results of statistical tests or a measure of precision for the comparison of costs between the randomised groups. Only 16 (36%) of the articles gave conclusions which were justified on the basis of results presented in the paper. No paper reported sample size calculations for costs. Conclusions The analysis and interpretation of cost data from published trials reveal a lack of statistical awareness. Strong and potentially misleading conclusions about the relative costs of alternative therapies have often been reported in the absence of supporting statistical evidence. Improvements in the analysis and reporting of health economic assessments are urgently required. Health economic guidelines need to be revised to incorporate more detailed statistical advice. Key messagesHealth economic evaluations required for important healthcare policy decisions are often carried out in randomised controlled trialsA review of such published economic evaluations assessed whether statistical methods for cost outcomes have been appropriately used and interpretedFew publications presented adequate descriptive information for costs or performed appropriate statistical analysesIn at least two thirds of the papers, the main conclusions regarding costs were not justifiedThe analysis and reporting of health economic assessments within randomised controlled trials urgently need improving PMID:9794854
NASA Technical Reports Server (NTRS)
Tanner, C. J.; Kruse, G. S.; Oman, B. H.
1975-01-01
A preliminary design analysis tool for rapidly performing trade-off studies involving fatigue, fracture, static strength, weight, and cost is presented. Analysis subprograms were developed for fatigue life, crack growth life, and residual strength; and linked to a structural synthesis module which in turn was integrated into a computer program. The part definition module of a cost and weight analysis program was expanded to be compatible with the upgraded structural synthesis capability. The resultant vehicle design and evaluation program is named VDEP-2. It is an accurate and useful tool for estimating purposes at the preliminary design stage of airframe development. A sample case along with an explanation of program applications and input preparation is presented.
Space transfer vehicle concepts and requirements study. Volume 3, book 1: Program cost estimates
NASA Technical Reports Server (NTRS)
Peffley, Al F.
1991-01-01
The Space Transfer Vehicle (STV) Concepts and Requirements Study cost estimate and program planning analysis is presented. The cost estimating technique used to support STV system, subsystem, and component cost analysis is a mixture of parametric cost estimating and selective cost analogy approaches. The parametric cost analysis is aimed at developing cost-effective aerobrake, crew module, tank module, and lander designs with the parametric cost estimates data. This is accomplished using cost as a design parameter in an iterative process with conceptual design input information. The parametric estimating approach segregates costs by major program life cycle phase (development, production, integration, and launch support). These phases are further broken out into major hardware subsystems, software functions, and tasks according to the STV preliminary program work breakdown structure (WBS). The WBS is defined to a low enough level of detail by the study team to highlight STV system cost drivers. This level of cost visibility provided the basis for cost sensitivity analysis against various design approaches aimed at achieving a cost-effective design. The cost approach, methodology, and rationale are described. A chronological record of the interim review material relating to cost analysis is included along with a brief summary of the study contract tasks accomplished during that period of review and the key conclusions or observations identified that relate to STV program cost estimates. The STV life cycle costs are estimated on the proprietary parametric cost model (PCM) with inputs organized by a project WBS. Preliminary life cycle schedules are also included.
Manufacturing Competitiveness and Supply Chain Analyses for Hydrogen Refueling Stations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mayyas, Ahmad T; Garland, Nancy
This slide deck was presented in the monthly FCTO webinar series (May 2017). The goal of this presentation was to share our latest results and remarks on the manufacturing competitiveness analysis of the hydrogen refueling stations (HRS). Manufacturing cost models were developed for major systems in the HRS such as compressors, storage tanks, chillers, heat exchangers, and dispensers. In addition to the cost models, we also discussed important remarks from our analysis for the international trade flows and global supply chain for the hydrogen refueling stations. The last part of the presentation also highlights effect of economies of scale andmore » high production volumes on lowering the cost of the hydrogen at the pump.« less
Examination of a perceived cost model of employees' negative feedback-seeking behavior.
Lu, Kuo-Ming; Pan, Su-Ying; Cheng, Jen-Wei
2011-01-01
The present study extends the feedback-seeking behavior literature by investigating how supervisor-related antecedents (i.e., supervisors' expert power, reflected appraisals of supervisors, and supervisors' emotional intelligence) influence subordinates' negative feedback-seeking behavior (NFSB) through different cost/value perceptions (i.e., expectancy value, self-presentation cost, and ego cost). Using data collected from 216 supervisor-subordinate dyads from various industries in Taiwan, we employ structural equation modeling analysis to test our hypotheses. The results show that expectancy value mediates the relationship between supervisor expert power and subordinates' NFSB. Moreover, self-presentation cost mediates the relationship between reflected appraisals of supervisors' and subordinates' NFSB. Theoretical and practical implications of this study are also discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
This report presents the economic analysis of final effluent limitation guidelines, New Source Performance Standards, and pretreatment standards being promulgated for the steam-electric power plant point source category. It describes the costs of the final regulations, assesses the effects of these costs on the electric utility industry, and examines the cost-effectiveness of the regulations.
7 CFR 1717.857 - Refinancing of existing secured debt-distribution and power supply borrowers.
Code of Federal Regulations, 2013 CFR
2013-01-01
... the loan being refinanced; and (4) The present value of the cost of the refinancing loan, including all transaction costs and any required investments in the lender, is less than the present value of... used in the present value analysis shall be equal to either: (i) The current rate on Treasury...
7 CFR 1717.857 - Refinancing of existing secured debt-distribution and power supply borrowers.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the loan being refinanced; and (4) The present value of the cost of the refinancing loan, including all transaction costs and any required investments in the lender, is less than the present value of... used in the present value analysis shall be equal to either: (i) The current rate on Treasury...
7 CFR 1717.857 - Refinancing of existing secured debt-distribution and power supply borrowers.
Code of Federal Regulations, 2012 CFR
2012-01-01
... the loan being refinanced; and (4) The present value of the cost of the refinancing loan, including all transaction costs and any required investments in the lender, is less than the present value of... used in the present value analysis shall be equal to either: (i) The current rate on Treasury...
Rodriguez-Martinez, Carlos E; Sossa-Briceño, Monica P; Castro-Rodriguez, Jose A
2018-05-01
Asthma educational interventions have been shown to improve several clinically and economically important outcomes. However, these interventions are costly in themselves and could lead to even higher disease costs. A cost-effectiveness threshold analysis would be helpful in determining the threshold value of the cost of educational interventions, leading to these interventions being cost-effective. The aim of the present study was to perform a cost-effectiveness threshold analysis to determine the level at which the cost of a pediatric asthma educational intervention would be cost-effective and cost-saving. A Markov-type model was developed in order to estimate costs and health outcomes of a simulated cohort of pediatric patients with persistent asthma treated over a 12-month period. Effectiveness parameters were obtained from a single uncontrolled before-and-after study performed with Colombian asthmatic children. Cost data were obtained from official databases provided by the Colombian Ministry of Health. The main outcome was the variable "quality-adjusted life-years" (QALYs). A deterministic threshold sensitivity analysis showed that the asthma educational intervention will be cost-saving to the health system if its cost is under US$513.20. Additionally, the analysis showed that the cost of the intervention would have to be below US$967.40 in order to be cost-effective. This study identified the level at which the cost of a pediatric asthma educational intervention will be cost-effective and cost-saving for the health system in Colombia. Our findings could be a useful aid for decision makers in efficiently allocating limited resources when planning asthma educational interventions for pediatric patients.
A cost-benefit analysis of a deposit-refund program for beverage containers in Israel.
Lavee, Doron
2010-02-01
The paper presents a full cost-benefit analysis of a deposit-refund program for beverage containers in Israel. We examine all cost elements of the program--storage, collection, and treatment costs of empty containers, and all potential benefits--savings in alternative treatment costs (waste collection and landfill disposal), cleaner public spaces, reduction of landfill volumes, energy-savings externalities associated with use of recycled materials, and creation of new workplaces. A wide variety of data resources is employed, and some of the critical issues are examined via several approaches. The main finding of the paper is that the deposit-refund program is clearly economically worthwhile. The paper contributes to the growing body of literature on deposit-refund programs by its complete and detailed analysis of all relevant factors of such a program, and also specifically in its analysis of the savings in alternative waste management costs. This analysis reveals greater savings than are usually assumed, and thus shows the deposit-refund program to be highly efficient.
NASA Technical Reports Server (NTRS)
1972-01-01
The technical and cost analysis that was performed for the payload system operations analysis is presented. The technical analysis consists of the operations for the payload/shuttle and payload/tug, and the spacecraft analysis which includes sortie, automated, and large observatory type payloads. The cost analysis includes the costing tradeoffs of the various payload design concepts and traffic models. The overall objectives of this effort were to identify payload design and operational concepts for the shuttle which will result in low cost design, and to examine the low cost design concepts to identify applicable design guidelines. The operations analysis examined several past and current NASA and DoD satellite programs to establish a shuttle operations model. From this model the analysis examined the payload/shuttle flow and determined facility concepts necessary for effective payload/shuttle ground operations. The study of the payload/tug operations was an examination of the various flight timelines for missions requiring the tug.
Retrospective Assessment of Cost Savings From Prevention
Grosse, Scott D.; Berry, Robert J.; Tilford, J. Mick; Kucik, James E.; Waitzman, Norman J.
2016-01-01
Introduction Although fortification of food with folic acid has been calculated to be cost saving in the U.S., updated estimates are needed. This analysis calculates new estimates from the societal perspective of net cost savings per year associated with mandatory folic acid fortification of enriched cereal grain products in the U.S. that was implemented during 1997–1998. Methods Estimates of annual numbers of live-born spina bifida cases in 1995–1996 relative to 1999–2011 based on birth defects surveillance data were combined during 2015 with published estimates of the present value of lifetime direct costs updated in 2014 U.S. dollars for a live-born infant with spina bifida to estimate avoided direct costs and net cost savings. Results The fortification mandate is estimated to have reduced the annual number of U.S. live-born spina bifida cases by 767, with a lower-bound estimate of 614. The present value of mean direct lifetime cost per infant with spina bifida is estimated to be $791,900, or $577,000 excluding caregiving costs. Using a best estimate of numbers of avoided live-born spina bifida cases, fortification is estimated to reduce the present value of total direct costs for each year's birth cohort by $603 million more than the cost of fortification. A lower-bound estimate of cost savings using conservative assumptions, including the upper-bound estimate of fortification cost, is $299 million. Conclusions The estimates of cost savings are larger than previously reported, even using conservative assumptions. The analysis can also inform assessments of folic acid fortification in other countries. PMID:26790341
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, Lijuan; Gonder, Jeff; Burton, Evan
This study evaluates the costs and benefits associated with the use of a plug-in hybrid electric bus and determines the cost effectiveness relative to a conventional bus and a hybrid electric bus. A sensitivity sweep analysis was performed over a number of a different battery sizes, charging powers, and charging stations. The net present value was calculated for each vehicle design and provided the basis for the design evaluation. In all cases, given present day economic assumptions, the conventional bus achieved the lowest net present value while the optimal plug-in hybrid electric bus scenario reached lower lifetime costs than themore » hybrid electric bus. The study also performed parameter sensitivity analysis under low market potential assumptions and high market potential assumptions. The net present value of plug-in hybrid electric bus is close to that of conventional bus.« less
The benefits of transit in the United States : a review and analysis of benefit-cost studies.
DOT National Transportation Integrated Search
2015-07-01
This white paper presents the findings from a review and analysis of the available literature on benefit-cost (b-c) estimates of : existing U.S. transit systems. Following an inventory of the literature, the b-c estimates from each study were organiz...
DOD/NASA system impact analysis (study 2.1). Volume 2: Study results
NASA Technical Reports Server (NTRS)
1973-01-01
Results of the tug turnaround cost study and the space transportation system (STS) abort modes and effects study are presented for DOD/NASA system impact analysis. Cost estimates are given for tug turnabout; and vehicle description, abort assessment, and abort performance capability are given for the STS.
Life Cycle Cost Analysis Handbook. First Edition.
ERIC Educational Resources Information Center
Alaska State Dept. of Education and Early Development, Juneau.
This handbook presents guidelines on the Life Cycle Cost Analysis (LCCA) of building operations over the life of a building to assist school districts and consultants with evaluating proposed educational facility construction projects. It defines the terminology found in an LCCA, such as initial and future expenses, residual value, real discount…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Arizona. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Hawaii. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Connecticut. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
NASA Technical Reports Server (NTRS)
1985-01-01
The results of detailed cost estimates and economic analysis performed on the updated Model 101 configuration of the general purpose Aft Cargo Carrier (ACC) are given. The objective of this economic analysis is to provide the National Aeronautics and Space Administration (NASA) with information on the economics of using the ACC on the Space Transportation System (STS). The detailed cost estimates for the ACC are presented by a work breakdown structure (WBS) to ensure that all elements of cost are considered in the economic analysis and related subsystem trades. Costs reported by WBS provide NASA with a basis for comparing competing designs and provide detailed cost information that can be used to forecast phase C/D planning for new projects or programs derived from preliminary conceptual design studies. The scope covers all STS and STS/ACC launch vehicle cost impacts for delivering payloads to a 160 NM low Earth orbit (LEO).
NASA Technical Reports Server (NTRS)
1985-01-01
Results of detailed cost estimates and economic analysis performed on the updated 201 configuration of the dedicated Aft Cargo Carrier (DACC) are given. The objective of this economic analysis is to provide the National Aeronautics and Space Administration (NASA) with information on the economics of using the DACC on the Space Transportation System (STS). The detailed cost estimates for the DACC are presented by a work breakdown structure (WBS) to ensure that all elements of cost are considered in the economic analysis and related subsystem trades. Costs reported by WBS provide NASA with a basis for comparing competing designs and provide detailed cost information that can be used to forecast phase C/D planning for new projects or programs derived from preliminary conceptual design studies. The scope covers all STS and STS/DACC launch vehicle cost impacts for delivering an orbital transfer vehicle to a 120 NM low Earth orbit (LEO).
Cost-Benefit Analysis of Communities That Care Outcomes at Eighth Grade
Kuklinski, Margaret R.; Briney, John S.; Hawkins, J. David; Catalano, Richard F.
2011-01-01
This paper presents a cost-benefit analysis of the Communities That Care (CTC) prevention system, a public health approach to reducing risk, enhancing protection, and reducing the prevalence of adolescent health and behavior problems community wide. The analysis is based on outcomes from a panel of students followed from Grade 5 through Grade 8 in a randomized controlled trial involving 24 communities in 7 states. Previous analyses have shown that CTC prevented the initiation of cigarette smoking, alcohol use, and delinquency by the end of 8th grade in CTC communities compared to controls. This paper estimates long-term monetary benefits associated with significant intervention effects on cigarette smoking and delinquency as compared to the cost of conducting the intervention. Under conservative cost assumptions, the net present benefit is $5,250 per youth, including $812 from the prevention of cigarette smoking and $4,438 from the prevention of delinquency. The benefit-cost ratio indicates a return of $5.30 per $1.00 invested. Under less conservative but still viable cost assumptions, the benefit-cost ratio due to prevention of cigarette smoking and delinquency increases to $10.23 per $1.00 invested. Benefits from CTC’s reduction in alcohol initiation as well as broader inclusion of quality-of-life gains would further increase CTC’s benefit-cost ratio. Results provide evidence that CTC is a cost-beneficial preventive intervention and a good investment of public dollars, even under very conservative cost and benefit assumptions. PMID:22108900
NASA Technical Reports Server (NTRS)
Maynard, O. E.; Brown, W. C.; Edwards, A.; Haley, J. T.; Meltz, G.; Howell, J. M.; Nathan, A.
1975-01-01
The efforts and recommendations associated with preliminary design and concept definition for mechanical systems and flight operations are presented. Technical discussion in the areas of mission analysis, antenna structural concept, configuration analysis, assembly and packaging with associated costs are presented. Technology issues for the control system, structural system, thermal system and assembly including cost and man's role in assembly and maintenance are identified. Background and desired outputs for future efforts are discussed.
A Decision Support System for Energy Policy Analysis.
1980-07-01
new realities or hypothesized realities to the modeling system. Lack of a PDL would make the system inflexible and accessible only to a patient ... expert . Certainly, given the present ratio of costs of personnel to costs of computers, the alternative of presenting data in its raw form is acceptable
Health care economic analyses and value-based medicine.
Brown, Melissa M; Brown, Gary C; Sharma, Sanjay; Landy, Jennifer
2003-01-01
Health care economic analyses are becoming increasingly important in the evaluation of health care interventions, including many within ophthalmology. Encompassed with the realm of health care economic studies are cost-benefit analysis, cost-effectiveness analysis, cost-minimization analysis, and cost-utility analysis. Cost-utility analysis is the most sophisticated form of economic analysis and typically incorporates utility values. Utility values measure the preference for a health state and range from 0.0 (death) to 1.0 (perfect health). When the change in utility measures conferred by a health care intervention is multiplied by the duration of the benefit, the number of quality-adjusted life-years (QALYs) gained from the intervention is ascertained. This methodology incorporates both the improvement in quality of life and/or length of life, or the value, occurring as a result of the intervention. This improvement in value can then be amalgamated with discounted costs to yield expenditures per quality-adjusted life-year ($/QALY) gained. $/QALY gained is a measure that allows a comparison of the patient-perceived value of virtually all health care interventions for the dollars expended. A review of the literature on health care economic analyses, with particular emphasis on cost-utility analysis, is included in the present review. It is anticipated that cost-utility analysis will play a major role in health care within the coming decade.
Cost of Equity Estimation in Fuel and Energy Sector Companies Based on CAPM
NASA Astrophysics Data System (ADS)
Kozieł, Diana; Pawłowski, Stanisław; Kustra, Arkadiusz
2018-03-01
The article presents cost of equity estimation of capital groups from the fuel and energy sector, listed at the Warsaw Stock Exchange, based on the Capital Asset Pricing Model (CAPM). The objective of the article was to perform a valuation of equity with the application of CAPM, based on actual financial data and stock exchange data and to carry out a sensitivity analysis of such cost, depending on the financing structure of the entity. The objective of the article formulated in this manner has determined its' structure. It focuses on presentation of substantive analyses related to the core of equity and methods of estimating its' costs, with special attention given to the CAPM. In the practical section, estimation of cost was performed according to the CAPM methodology, based on the example of leading fuel and energy companies, such as Tauron GE and PGE. Simultaneously, sensitivity analysis of such cost was performed depending on the structure of financing the company's operation.
STS propellant scavenging systems study. Part 2, volume 2: Cost and WBS/dictionary
NASA Technical Reports Server (NTRS)
Williams, Frank L.
1987-01-01
Presented are the results of the cost analysis performed to update and refine the program phase C/D cost estimates for a Shuttle Derived Vehicle (SDV) tanker. The SDV tanker concept is an unmanned cargo vehicle incorporating a set of propellant tanks in the vehicle's payload module. The tanker will be used to meet the demand for a cryogenic propellant supply in orbit. The propellant tanks are delivered to a low Earth orbit or to an orbit in the vicinity of the Space Station. The intent of the economic analysis is to provide NASA with economic justification for the propellant scavenging concept that minimizes the total Space Transportation System life cycle cost. The detailed costs supporting the concept selection process are presented with descriptive text to aid in forecasting the phase C/D project and program planning. Included are all propellant scavenging costs as well as all SDV, STS and Orbital Maneuvering Vehicle charges to deliver the propellants to the Space Station.
Moores, B Michael
2016-06-01
In 1973, International Commission on Radiological Protection Publication 22 recommended that the acceptability of radiation exposure levels for a given activity should be determined by a process of cost-benefit analysis. It was felt that this approach could be used to underpin both the principle of ALARA as well for justification purposes. The net benefit, B, of an operation involving irradiation was regarded as equal to the difference between its gross benefit, V, and the sum of three components; the basic production cost associated with the operation, P; the cost of achieving the selected level of protection, X; and the cost Y of the detriment involved in the operation: [Formula: see text] This article presents a theoretical cost-risk-benefit analysis that is applicable to the diagnostic accuracy (Levels 1 and 2) of the hierarchical efficacy model presented by National Council on Radiation Protection and Measurements in 1992. This enables the costs of an examination to be related to the sensitivity and specificity of an X-ray examination within a defined clinical problem setting and introduces both false-positive/false-negative diagnostic outcomes into the patient radiation protection framework. © The Author 2015. Published by Oxford University Press.
Cost and Quality Issues in Day Care: A Practical Approach to Assessment. (A Working Paper).
ERIC Educational Resources Information Center
Settles, Barbara H.; Cripps, Jean Helmkamp
Cost and quality issues are analyzed as they relate to provision of group day care. A series of assessment tables for self-evaluation of centers is presented. Three specific aspects are considered: cost of care, quality of care delivered to children and staff use in day care centers. Cost analysis focuses on: (1) the total cost of care per…
Angevine, Peter D; Berven, Sigurd
2014-10-15
Narrative overview. To provide clinicians with a basic understanding of economic studies, including cost-benefit, cost-effectiveness, and cost-utility analyses. As decisions regarding public health policy, insurance reimbursement, and patient care incorporate factors other than traditional outcomes such as satisfaction or symptom resolution, health economic studies are increasingly prominent in the literature. This trend will likely continue, and it is therefore important for clinicians to have a fundamental understanding of the common types of economic studies and be able to read them critically. In this brief article, the basic concepts of economic studies and the differences between cost-benefit, cost-effectiveness, and cost-utility studies are discussed. An overview of the field of health economic analysis is presented. Cost-benefit, cost-effectiveness, and cost-utility studies all integrate cost and outcome data into a decision analysis model. These different types of studies are distinguished mainly by the way in which outcomes are valued. Obtaining accurate cost data is often difficult and can limit the generalizability of a study. With a basic understanding of health economic analysis, clinicians can be informed consumers of these important studies.
Gandjour, Afschin; Müller, Dirk
2014-10-01
One of the major ethical concerns regarding cost-effectiveness analysis in health care has been the inclusion of life-extension costs ("it is cheaper to let people die"). For this reason, many analysts have opted to rule out life-extension costs from the analysis. However, surprisingly little has been written in the health economics literature regarding this ethical concern and the resulting practice. The purpose of this work was to present a framework and potential solution for ethical objections against life-extension costs. This work found three levels of ethical concern: (i) with respect to all life-extension costs (disease-related and -unrelated); (ii) with respect to disease-unrelated costs only; and (iii) regarding disease-unrelated costs plus disease-related costs not influenced by the intervention. Excluding all life-extension costs for ethical reasons would require-for reasons of consistency-a simultaneous exclusion of savings from reducing morbidity. At the other extreme, excluding only disease-unrelated life-extension costs for ethical reasons would require-again for reasons of consistency-the exclusion of health gains due to treatment of unrelated diseases. Therefore, addressing ethical concerns regarding the inclusion of life-extension costs necessitates fundamental changes in the calculation of cost effectiveness.
Vijgen, Sylvia M C; Westerhuis, Michelle E M H; Opmeer, Brent C; Visser, Gerard H A; Moons, Karl G M; Porath, Martina M; Oei, Guid S; Van Geijn, Herman P; Bolte, Antoinette C; Willekes, Christine; Nijhuis, Jan G; Van Beek, Erik; Graziosi, Giuseppe C M; Schuitemaker, Nico W E; Van Lith, Jan M M; Van Den Akker, Eline S A; Drogtrop, Addy P; Van Dessel, Hendrikus J H M; Rijnders, Robbert J P; Oosterbaan, Herman P; Mol, Ben Willem J; Kwee, Anneke
2011-07-01
To assess the cost-effectiveness of addition of ST analysis of the fetal electrocardiogram (ECG; STAN) to cardiotocography (CTG) for fetal surveillance during labor compared with CTG only. Cost-effectiveness analysis based on a randomized clinical trial on ST analysis of the fetal ECG. Obstetric departments of three academic and six general hospitals in The Netherlands. Population. Laboring women with a singleton high-risk pregnancy, a fetus in cephalic presentation, a gestational age >36 weeks and an indication for internal electronic fetal monitoring. A trial-based cost-effectiveness analysis was performed from a health-care provider perspective. Primary health outcome was the incidence of metabolic acidosis measured in the umbilical artery. Direct medical costs were estimated from start of labor to childbirth. Cost-effectiveness was expressed as costs to prevent one case of metabolic acidosis. The incidence of metabolic acidosis was 0.7% in the ST-analysis group and 1.0% in the CTG-only group (relative risk 0.70; 95% confidence interval 0.38-1.28). Per delivery, the mean costs per patient of CTG plus ST analysis (n= 2 827) were €1,345 vs. €1,316 for CTG only (n= 2 840), with a mean difference of €29 (95% confidence interval -€9 to €77) until childbirth. The incremental costs of ST analysis to prevent one case of metabolic acidosis were €9 667. The additional costs of monitoring by ST analysis of the fetal ECG are very limited when compared with monitoring by CTG only and very low compared with the total costs of delivery. © 2011 The Authors Acta Obstetricia et Gynecologica Scandinavica© 2011 Nordic Federation of Societies of Obstetrics and Gynecology.
A Method of Measuring the Costs and Benefits of Applied Research.
ERIC Educational Resources Information Center
Sprague, John W.
The Bureau of Mines studied the application of the concepts and methods of cost-benefit analysis to the problem of ranking alternative applied research projects. Procedures for measuring the different classes of project costs and benefits, both private and public, are outlined, and cost-benefit calculations are presented, based on the criteria of…
Evaluating Academic Journals Using Impact Factor and Local Citation Score
ERIC Educational Resources Information Center
Chung, Hye-Kyung
2007-01-01
This study presents a method for journal collection evaluation using citation analysis. Cost-per-use (CPU) for each title is used to measure cost-effectiveness with higher CPU scores indicating cost-effective titles. Use data are based on the impact factor and locally collected citation score of each title and is compared to the cost of managing…
Astronomy sortie mission definition study. Addendum: Follow-on analyses
NASA Technical Reports Server (NTRS)
1973-01-01
Results of design analyses, trade studies, and planning data of the Astronomy Sortie Mission Definition Study are presented. An in-depth analysis of UV instruments, nondeployed solar payload, and on-orbit access is presented. Planning data are considered, including the cost and schedules associated with the astronomy instruments and/or support hardware. Costs are presented in a parametric fashion.
NASA Technical Reports Server (NTRS)
1985-01-01
Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. A narrative summary of the cost estimates and work breakdown structure/dictionary for both study phases is presented. Costs were estimated using the Grumman Space Programs Algorithm for Cost Estimating (SPACE) computer program and results are given for four AOTV configurations. The work breakdown structure follows the standard of the joint government/industry Space Systems Cost Analysis Group (SSCAG). A table is provided which shows cost estimates for each work breakdown structure element.
Techno-economic analysis of fuel cell auxiliary power units as alternative to idling
NASA Astrophysics Data System (ADS)
Jain, Semant; Chen, Hsieh-Yeh; Schwank, Johannes
This paper presents a techno-economic analysis of fuel-cell-based auxiliary power units (APUs), with emphasis on applications in the trucking industry and the military. The APU system is intended to reduce the need for discretionary idling of diesel engines or gas turbines. The analysis considers the options for on-board fuel processing of diesel and compares the two leading fuel cell contenders for automotive APU applications: proton exchange membrane fuel cell and solid oxide fuel cell. As options for on-board diesel reforming, partial oxidation and auto-thermal reforming are considered. Finally, using estimated and projected efficiency data, fuel consumption patterns, capital investment, and operating costs of fuel-cell APUs, an economic evaluation of diesel-based APUs is presented, with emphasis on break-even periods as a function of fuel cost, investment cost, idling time, and idling efficiency. The analysis shows that within the range of parameters studied, there are many conditions where deployment of an SOFC-based APU is economically viable. Our analysis indicates that at an APU system cost of 100 kW -1, the economic break-even period is within 1 year for almost the entire range of conditions. At 500 kW -1 investment cost, a 2-year break-even period is possible except for the lowest end of the fuel consumption range considered. However, if the APU investment cost is 3000 kW -1, break-even would only be possible at the highest fuel consumption scenarios. For Abram tanks, even at typical land delivered fuel costs, a 2-year break-even period is possible for APU investment costs as high as 1100 kW -1.
Nogier, Cyril; Hanlon, Patrick; Wiedenmayer, Karin; Maire, Nicolas
2015-03-01
A compact pre-filled auto-disable injection (cPAD) presentation is being developed for the fully liquid pentavalent DTP-HepB-Hib vaccine. A cost analysis (CA) to compare this presentation with the presently used single-dose vial (SDV) and multi-dose vial (MDV) was conducted in Cambodia, Ghana, and Peru. The CA included the development of an excel-based costing model and considered the costs of vaccine, safe injection equipment, procurement, storage, transport and distribution, vaccine administration by health staff, medical waste management, start-up activities, as well as coverage, birth cohort, vaccine, and safe injection equipment wastage rates. The outcome was the change in cost per pentavalent fully immunized child (PFIC) for a switch to cPAD. Field visits to health facilities, and interviews with key informants from immunization services and regulatory authorities, were conducted to collect data and to test the costing model in country context. Cost data were also obtained from manufacturers, published price lists, and author estimates. A sensitivity analysis (SA) was conducted to explore possible variations in values of data collected. Based on vaccine price trends estimated for 2016, cPAD is less costly in Ghana [incremental cost per PFIC: $US-0.59 (-6.46 %)] than the current presentation (ten-dose MDV) and in Peru (SDV): $US-0.89 (-7.14 %). In Cambodia, cPAD is more costly than SDV: $US+0.33 (+3.90 %). The most significant cost item per PFIC is the vaccine (reflecting wastage rates) in all presentations. The dominance of the vaccine price per dose and, to a lesser extent, the wastage rates in the incremental cost per PFIC show potential to simplify future analyses. Other relevant considerations at country level for a change of presentation include the potential for improved safety with cPAD, planned introduction of other vaccines, environmental and safety issues, and financial sustainability.
Offset Printing Plate Quality Sensor on a Low-Cost Processor
Poljak, Jelena; Botella, Guillermo; García, Carlos; Poljaček, Sanja Mahović; Prieto-Matías, Manuel; Tirado, Francisco
2013-01-01
The aim of this work is to develop a microprocessor-based sensor that measures the quality of the offset printing plate through the introduction of different image analysis applications. The main features of the presented system are the low cost, the low amount of power consumption, its modularity and easy integration with other industrial modules for printing plates, and its robustness against noise environments. For the sake of clarity, a viability analysis of previous software is presented through different strategies, based on dynamic histogram and Hough transform. This paper provides performance and scalability data compared with existing costly commercial devices. Furthermore, a general overview of quality control possibilities for printing plates is presented and could be useful to a system where such controls are regularly conducted. PMID:24284766
NASA Technical Reports Server (NTRS)
Hanley, G. M.
1979-01-01
Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.
Economics of small fully reusable launch systems (SSTO vs. TSTO)
NASA Astrophysics Data System (ADS)
Koelle, Dietrich E.
1997-01-01
The paper presents a design and cost comparison of an SSTO vehicle concept with two TSTO vehicle options. It is shown that the ballistic SSTO concept feasibility is NOT a subject of technology but of proper vehicle SIZING. This also allows to design for sufficient performance margin. The cost analysis has been performed with the TRANSCOST- Model, also using the "Standardized Cost per Flight" definition for the CpF comparison. The results show that a present-technology SSTO for LEO missions is about 30 % less expensive than any TSTO vehicle, based on Life-Cycle-Cost analysis, in addition to the inherent operational/ reliability advantages of a single-stage vehicle. In case of a commercial development and operation it is estimated that an SSTO vehicle with 400 Mg propellant mass can be flown for some 9 Million per mission (94/95) with 14 Mg payload to LEO, 7 Mg to the Space Station Orbit, or 2 Mg to a 200/800 km polar orbit. This means specific transportation cost of 650 /kg (300 $/lb), resp.3.2 MYr/Mg, to LEO which is 6 -10% of present expendable launch vehicles.
Runaway Costs in Medi-Cal—A Myth
Heckman, John R.; Jones, Michael W.
1980-01-01
An analysis of increases in Medi-Cal expenditures to their present level, more than $4 billion a year, shows them to be attributable largely to changes in eligibility and scope of benefits. The actual costs of providing care have risen at a relatively modest rate. If in fact costs are to be lowered from present levels, public policy makers must make important decisions concerning program changes which transcend merely altering payment and delivery methods. PMID:6996335
Exploring NASA Human Spaceflight and Pioneering Scenarios
NASA Technical Reports Server (NTRS)
Zapata, Edgar; Wilhite, Alan
2015-01-01
The life cycle cost analysis of space exploration scenarios is explored via a merger of (1) scenario planning, separating context and (2) modeling and analysis of specific content. Numerous scenarios are presented, leading to cross-cutting recommendations addressing life cycle costs, productivity, and approaches applicable to any scenarios. Approaches address technical and non-technical factors.
1987-08-01
of economics (e.g., present/future value, costing, cost-benefit analysis, regression analysis, etc.) are scattered throughout the core. Unfortunately...in the subject, largely because most of the problems and examples used are not related to military operations research. Some fundamental -j principles
A Cost-Savings Analysis of a Statewide Parenting Education Program in Child Welfare
ERIC Educational Resources Information Center
Maher, Erin J.; Corwin, Tyler W.; Hodnett, Rhenda; Faulk, Karen
2012-01-01
Objectives: This article presents a cost-savings analysis of the statewide implementation of an evidence-informed parenting education program. Methods: Between the years 2005 and 2008, the state of Louisiana used the Nurturing Parenting Program (NPP) to impart parenting skills to child welfare-involved families. Following these families' outcomes…
Prospective Costs, Benefits, and Impacts of U.S. Renewable Portfolio Standards
DOE Office of Scientific and Technical Information (OSTI.GOV)
Heeter, Jenny S; Mai, Trieu T; Bird, Lori A
These slides were presented at a webinar on January 9, 2017. The slides overview a report that evaluates the future costs, benefits, and other impacts of renewable energy used to meet current state renewable portfolio standards (RPSs). It also examines a future scenario where RPSs are expanded. The analysis examines changes in electric system costs and retail electricity prices, which include all fixed and operating costs, including capital costs for all renewable, non-renewable, and supporting (e.g., transmission and storage) electric sector infrastructure; fossil fuel, uranium, and biomass fuel costs; and plant operations and maintenance expenditures. The analysis evaluates three specificmore » benefits: air pollution, greenhouse gas emissions, and water use. It also analyzes two other impacts, renewable energy workforce and economic development, and natural gas price suppression. The analysis finds that the benefits or renewable energy used to meet RPS polices exceed the costs, even when considering the highest cost and lowest benefit outcomes.« less
Development and Analysis of New Integrated Energy Systems for Sustainable Buildings
NASA Astrophysics Data System (ADS)
Khalid, Farrukh
Excessive consumption of fossil fuels in the residential sector and their associated negative environmental impacts bring a significant challenge to engineers within research and industrial communities throughout the world to develop more environmentally benign methods of meeting energy needs of residential sector in particular. This thesis addresses potential solutions for the issue of fossils fuel consumption in residential buildings. Three novel renewable energy based multigeneration systems are proposed for different types of residential buildings, and a comprehensive assessment of energetic and exergetic performances is given on the basis of total occupancy, energy load, and climate conditions. System 1 is a multigeneration system based on two renewable energy sources. It uses biomass and solar resources. The outputs of System 1 are electricity, space heating, cooling, and hot water. The energy and exergy efficiencies of System 1 are 91.0% and 34.9%, respectively. The results of the optimisation analysis show that the net present cost of System 1 is 2,700,496 and that the levelised cost of electricity is 0.117/kWh. System 2 is a multigeneration system, integrating three renewable energy based subsystems; wind turbine, concentrated solar collector, and Organic Rankine Cycle supplied by a ground source heat exchanger. The outputs of the System 2 are electricity, hot water, heating and cooling. The optimisation analysis shows that net present cost is 35,502 and levelised cost of electricity is 0.186/kWh. The energy and exergy efficiencies of System 2 are found to be 34.6% and 16.2%, respectively. System 3 is a multigeneration system, comprising two renewable energy subsystems-- geothermal and solar to supply power, cooling, heating, and hot water. The optimisation analysis shows that the net present cost of System 3 is 598,474, and levelised cost of electricity of 0.111/kWh. The energy and exergy efficiencies of System 3 are 20.2% and 19.2%, respectively, with outputs of electricity, hot water, cooling and space heating. A performance assessment for identical conditions indicates that System 3 offers the best performance, with the minimum net present cost of 26,001 and levelised cost of electricity of 0.136/kWh.
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Texas
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Texas. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Minnesota
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Minnesota. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Indiana
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Indiana. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Florida
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Florida. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Maine
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Maine. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Vermont
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Vermont. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Michigan
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Michigan. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Alabama
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Alabama. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of New Hampshire
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of New Hampshire. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of New Mexico
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of New Mexico. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Colorado
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Colorado. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Washington
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Washington. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Montana
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Montana. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the District of Columbia
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the District of Columbia. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Massachusetts
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Massachusetts. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Oregon
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Oregon. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Wisconsin
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Wisconsin. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Ohio
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Ohio. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of South Carolina
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of South Carolina. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of North Carolina
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of North Carolina. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology usedmore » in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Iowa
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hart, Philip R.; Athalye, Rahul A.; Xie, YuLong
2015-12-01
Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Iowa. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used inmore » the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.« less
NASA Technical Reports Server (NTRS)
Wolf, M.
1981-01-01
The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.
Economic Evaluation of Teledentistry in Cleft Lip and Palate Patients.
Teoh, Jonathan; Hsueh, Arthur; Mariño, Rodrigo; Manton, David; Hallett, Kerrod
2018-06-01
To assess the use of Teledentistry (TD) in delivering specialist dental services at the Royal Children's Hospital (RCH) for rural and regional patients and to conduct an economic evaluation by building a decision model to estimate the costs and effectiveness of Teledental consultations compared with standard consultations at the RCH. A model-based analysis was conducted to determine the potential costs of implementing TD at the RCH. The outcome measure was timely consultations (whether the patient presented within an appropriate time according to the recommended schedule). Dental records at the RCH of those who presented for orthodontic or pediatric dental consultations were assessed. A cost-effectiveness analysis (CEA), comparing TD with the traditional method of consultation, was conducted. One-way sensitivity analysis was performed to test the robustness of the results. Results and Materials: A total of 367 TD appropriate consultations were identified, of which 241 were timely (65.7%). The mean cost of a RCH consultation was A$431.29, with the mean TD consult costing A$294.35. This represents a cost saving of A$136.95 per appointment. The CEA found TD to be a dominant option, with cost savings of A$3,160.81 for every additional timely consult. The model indicated that 36.7 days of clinic time may be freed up at the RCH to treat other patients and expand capacity. These results were robust when performing one-way sensitivity analysis. When taking a societal perspective, the implementation of TD is likely to be a cost-effective alternative compared with the standard practice of face-to-face consultation at the RCH.
Guidebook for solar process-heat applications
NASA Astrophysics Data System (ADS)
Fazzolare, R.; Mignon, G.; Campoy, L.; Luttmann, F.
1981-01-01
The potential for solar process heat in Arizona and some of the general technical aspects of solar, such as insolation, siting, and process analysis are explored. Major aspects of a solar plant design are presented. Collectors, storage, and heat exchange are discussed. Reducing hardware costs to annual dollar benefits is also discussed. Rate of return, cash flow, and payback are discussed as they relate to solar systems. Design analysis procedures are presented. The design cost optimization techniques using a yearly computer simulation of a solar process operation is demonstrated.
Net present value analysis: appropriate for public utilities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davidson, W.N. III
1980-08-28
The net-present-value technique widely used by unregulated companies for capital budgeting can also apply to regulated public utilities. Used to decide whether an investment is worthwhile, the NPV technique discounts an investment's initial outlay or cost. The type of project most appropriate for an NPV analysis is that designed to lower costs. Efficiency-improving investments can be adequately evaluated by the NPV method, which in certain cases is easier to use than some of the more complicated revenue-requirement computer models.
Grosse, Scott D; Berry, Robert J; Mick Tilford, J; Kucik, James E; Waitzman, Norman J
2016-05-01
Although fortification of food with folic acid has been calculated to be cost saving in the U.S., updated estimates are needed. This analysis calculates new estimates from the societal perspective of net cost savings per year associated with mandatory folic acid fortification of enriched cereal grain products in the U.S. that was implemented during 1997-1998. Estimates of annual numbers of live-born spina bifida cases in 1995-1996 relative to 1999-2011 based on birth defects surveillance data were combined during 2015 with published estimates of the present value of lifetime direct costs updated in 2014 U.S. dollars for a live-born infant with spina bifida to estimate avoided direct costs and net cost savings. The fortification mandate is estimated to have reduced the annual number of U.S. live-born spina bifida cases by 767, with a lower-bound estimate of 614. The present value of mean direct lifetime cost per infant with spina bifida is estimated to be $791,900, or $577,000 excluding caregiving costs. Using a best estimate of numbers of avoided live-born spina bifida cases, fortification is estimated to reduce the present value of total direct costs for each year's birth cohort by $603 million more than the cost of fortification. A lower-bound estimate of cost savings using conservative assumptions, including the upper-bound estimate of fortification cost, is $299 million. The estimates of cost savings are larger than previously reported, even using conservative assumptions. The analysis can also inform assessments of folic acid fortification in other countries. Published by Elsevier Inc.
National Launch System comparative economic analysis
NASA Technical Reports Server (NTRS)
Prince, A.
1992-01-01
Results are presented from an analysis of economic benefits (or losses), in the form of the life cycle cost savings, resulting from the development of the National Launch System (NLS) family of launch vehicles. The analysis was carried out by comparing various NLS-based architectures with the current Shuttle/Titan IV fleet. The basic methodology behind this NLS analysis was to develop a set of annual payload requirements for the Space Station Freedom and LEO, to design launch vehicle architectures around these requirements, and to perform life-cycle cost analyses on all of the architectures. A SEI requirement was included. Launch failure costs were estimated and combined with the relative reliability assumptions to measure the effects of losses. Based on the analysis, a Shuttle/NLS architecture evolving into a pressurized-logistics-carrier/NLS architecture appears to offer the best long-term cost benefit.
Langenderfer, Dale; McCormack, Francis X.; Schauer, Daniel P.; Eckman, Mark H.
2017-01-01
Rationale: Patients without a known history of lung disease presenting with a spontaneous pneumothorax are generally diagnosed as having primary spontaneous pneumothorax. However, occult diffuse cystic lung diseases such as Birt-Hogg-Dubé syndrome (BHD), lymphangioleiomyomatosis (LAM), and pulmonary Langerhans cell histiocytosis (PLCH) can also first present with a spontaneous pneumothorax, and their early identification by high-resolution computed tomographic (HRCT) chest imaging has implications for subsequent management. Objectives: The objective of our study was to evaluate the cost-effectiveness of HRCT chest imaging to facilitate early diagnosis of LAM, BHD, and PLCH. Methods: We constructed a Markov state-transition model to assess the cost-effectiveness of screening HRCT to facilitate early diagnosis of diffuse cystic lung diseases in patients presenting with an apparent primary spontaneous pneumothorax. Baseline data for prevalence of BHD, LAM, and PLCH and rates of recurrent pneumothoraces in each of these diseases were derived from the literature. Costs were extracted from 2014 Medicare data. We compared a strategy of HRCT screening followed by pleurodesis in patients with LAM, BHD, or PLCH versus conventional management with no HRCT screening. Measurements and Main Results: In our base case analysis, screening for the presence of BHD, LAM, or PLCH in patients presenting with a spontaneous pneumothorax was cost effective, with a marginal cost-effectiveness ratio of $1,427 per quality-adjusted life-year gained. Sensitivity analysis showed that screening HRCT remained cost effective for diffuse cystic lung diseases prevalence as low as 0.01%. Conclusions: HRCT image screening for BHD, LAM, and PLCH in patients with apparent primary spontaneous pneumothorax is cost effective. Clinicians should consider performing a screening HRCT in patients presenting with apparent primary spontaneous pneumothorax. PMID:27737563
Gupta, Nishant; Langenderfer, Dale; McCormack, Francis X; Schauer, Daniel P; Eckman, Mark H
2017-01-01
Patients without a known history of lung disease presenting with a spontaneous pneumothorax are generally diagnosed as having primary spontaneous pneumothorax. However, occult diffuse cystic lung diseases such as Birt-Hogg-Dubé syndrome (BHD), lymphangioleiomyomatosis (LAM), and pulmonary Langerhans cell histiocytosis (PLCH) can also first present with a spontaneous pneumothorax, and their early identification by high-resolution computed tomographic (HRCT) chest imaging has implications for subsequent management. The objective of our study was to evaluate the cost-effectiveness of HRCT chest imaging to facilitate early diagnosis of LAM, BHD, and PLCH. We constructed a Markov state-transition model to assess the cost-effectiveness of screening HRCT to facilitate early diagnosis of diffuse cystic lung diseases in patients presenting with an apparent primary spontaneous pneumothorax. Baseline data for prevalence of BHD, LAM, and PLCH and rates of recurrent pneumothoraces in each of these diseases were derived from the literature. Costs were extracted from 2014 Medicare data. We compared a strategy of HRCT screening followed by pleurodesis in patients with LAM, BHD, or PLCH versus conventional management with no HRCT screening. In our base case analysis, screening for the presence of BHD, LAM, or PLCH in patients presenting with a spontaneous pneumothorax was cost effective, with a marginal cost-effectiveness ratio of $1,427 per quality-adjusted life-year gained. Sensitivity analysis showed that screening HRCT remained cost effective for diffuse cystic lung diseases prevalence as low as 0.01%. HRCT image screening for BHD, LAM, and PLCH in patients with apparent primary spontaneous pneumothorax is cost effective. Clinicians should consider performing a screening HRCT in patients presenting with apparent primary spontaneous pneumothorax.
Resource modeling: A reality for program cost analysis
NASA Technical Reports Server (NTRS)
Fouts, L. D.; Hurst, R. L. (Principal Investigator)
1979-01-01
The approach, implementation, operation, and utilization of a model to establish capital investment and operational costs for the Program is presented. These are based on their interrelationships, dependencies, and alternative actions.
Electricity Prices in a Competitive Environment: Marginal Cost Pricing
1997-01-01
Presents the results of an analysis that focuses on two questions: (1) How are prices for competitive generation services likely to differ from regulated prices if competitive prices are based on marginal costs rather than regulated cost-of-service pricing? (2) What impacts will the competitive pricing of generation services (based on marginal costs) have on electricity consumption patterns, production costs, and the financial integrity of electricity suppliers?
Ise, Yuya; Wako, Tetsuya; Miura, Yoshihiko; Katayama, Shirou; Shimizu, Hisanori
2009-12-01
The present study was undertaken to determine the pharmacoeconomics of switching from sustained-release morphine tablet to matrix type (MT) of transdermal fontanel or sustained-release Oxycodone tablet. Cost-effective analysis was performed using a simulation model along with decision analysis. The analysis was done from the payer's perspective. The cost-effective ratio/patient of transdermal MT fontanel (22, 539 yen)was lower than that of sustained -release Oxycodone tablet (23, 630 yen), although a sensitivity analysis could not indicate that this result was reliable. These results suggest the possibility that transdermal MT fontanel was much less expensive than a sustained-release Oxycodone tablet.
Pérez, Concepción; Navarro, Ana; Saldaña, María T; Wilson, Koo; Rejas, Javier
2015-03-01
The aim of the present analysis was to model the association and predictive value of pain intensity on cost and resource utilization in patients with chronic peripheral neuropathic pain (PNP) treated in routine clinical practice settings in Spain. We performed a secondary economic analysis based on data from a multicenter, observational, and prospective cost-of-illness study in patients with chronic PNP that is refractory to prior treatment. Pain intensity was measured using the Short-Form McGill Pain Questionnaire. Univariate and multivariate linear regression models were fitted to identify independent predictors of cost and health care/non-health care resource utilization. A total of 1703 patients were included in the current analysis. Pain intensity was an independent predictor of total costs ([total costs]=35.6 [pain intensity]+214.5; coefficient of determination [R(2)]=0.19, P<0.001), direct costs ([direct costs]=10.8 [pain intensity]+257.7; R=0.06, P<0.001), and indirect costs ([indirect costs]=24.8 [pain intensity]-43.4; R(2)=0.20, P<0.001) related to chronic PNP in the univariate analysis. Pain intensity remains significantly associated with total costs, direct costs, and indirect costs after adjustment by other covariates in the multivariate analysis (P<0.001). None of the other variables considered in the multivariate analysis were predictors of resource utilization. Pain intensity predicts the health care and non-health care resource utilization, and costs related to chronic PNP. Management of patients with drugs associated with a higher reduction of pain intensity may have a greater impact on the economic burden of that condition.
Methodology for cost analysis of film-based and filmless portable chest systems
NASA Astrophysics Data System (ADS)
Melson, David L.; Gauvain, Karen M.; Beardslee, Brian M.; Kraitsik, Michael J.; Burton, Larry; Blaine, G. James; Brink, Gary S.
1996-05-01
Many studies analyzing the costs of film-based and filmless radiology have focused on multi- modality, hospital-wide solutions. Yet due to the enormous cost of converting an entire large radiology department or hospital to a filmless environment all at once, institutions often choose to eliminate film one area at a time. Narrowing the focus of cost-analysis may be useful in making such decisions. This presentation will outline a methodology for analyzing the cost per exam of film-based and filmless solutions for providing portable chest exams to Intensive Care Units (ICUs). The methodology, unlike most in the literature, is based on parallel data collection from existing filmless and film-based ICUs, and is currently being utilized at our institution. Direct costs, taken from the perspective of the hospital, for portable computed radiography chest exams in one filmless and two film-based ICUs are identified. The major cost components are labor, equipment, materials, and storage. Methods for gathering and analyzing each of the cost components are discussed, including FTE-based and time-based labor analysis, incorporation of equipment depreciation, lease, and maintenance costs, and estimation of materials costs. Extrapolation of data from three ICUs to model hypothetical, hospital-wide film-based and filmless ICU imaging systems is described. Performance of sensitivity analysis on the filmless model to assess the impact of anticipated reductions in specific labor, equipment, and archiving costs is detailed. A number of indirect costs, which are not explicitly included in the analysis, are identified and discussed.
Appendix W. Cost Analysis in Teacher Education Programs.
ERIC Educational Resources Information Center
Sell, G. Roger; And Others
This paper is an introduction to the basic cost-related tools available to management for planning, evaluating, and organizing resources for the purpose of achieving objectives within a teacher education preparation program. Three tools are presented in separate sections. Part I on the cost accounting tool for identifying, categorizing, and…
Analysis of Costs and Benefits in Rehabilitation. Final Report.
ERIC Educational Resources Information Center
Berkowitz, Monroe, Ed.; And Others
This report suggests feasible alternatives to the present methods of calculating benefits and costs of the joint federal-state vocational rehabilitation program. "Summary and Guide to Reading This Report" (Monroe Berkowitz) appears first. Part I, Background, Theory and Models, includes "The Cost Benefit Tradition in Vocational Rehabilitation"…
NASA Technical Reports Server (NTRS)
Torres-Pomales, Wilfredo
2014-01-01
This report presents an example of the application of multi-criteria decision analysis to the selection of an architecture for a safety-critical distributed computer system. The design problem includes constraints on minimum system availability and integrity, and the decision is based on the optimal balance of power, weight and cost. The analysis process includes the generation of alternative architectures, evaluation of individual decision criteria, and the selection of an alternative based on overall value. In this example presented here, iterative application of the quantitative evaluation process made it possible to deliberately generate an alternative architecture that is superior to all others regardless of the relative importance of cost.
Software Cost Estimation Using a Decision Graph Process: A Knowledge Engineering Approach
NASA Technical Reports Server (NTRS)
Stukes, Sherry; Spagnuolo, John, Jr.
2011-01-01
This paper is not a description per se of the efforts by two software cost analysts. Rather, it is an outline of the methodology used for FSW cost analysis presented in a form that would serve as a foundation upon which others may gain insight into how to perform FSW cost analyses for their own problems at hand.
Cost/Effort Drivers and Decision Analysis
NASA Technical Reports Server (NTRS)
Seidel, Jonathan
2010-01-01
Engineering trade study analyses demand consideration of performance, cost and schedule impacts across the spectrum of alternative concepts and in direct reference to product requirements. Prior to detailed design, requirements are too often ill-defined (only goals ) and prone to creep, extending well beyond the Systems Requirements Review. Though lack of engineering design and definitive requirements inhibit the ability to perform detailed cost analyses, affordability trades still comprise the foundation of these future product decisions and must evolve in concert. This presentation excerpts results of the recent NASA subsonic Engine Concept Study for an Advanced Single Aisle Transport to demonstrate an affordability evaluation of performance characteristics and the subsequent impacts on engine architecture decisions. Applying the Process Based Economic Analysis Tool (PBEAT), development cost, production cost, as well as operation and support costs were considered in a traditional weighted ranking of the following system-level figures of merit: mission fuel burn, take-off noise, NOx emissions, and cruise speed. Weighting factors were varied to ascertain the architecture ranking sensitivities to these performance figures of merit with companion cost considerations. A more detailed examination of supersonic variable cycle engine cost is also briefly presented, with observations and recommendations for further refinements.
A cost-benefit analysis of a deposit-refund program for beverage containers in Israel
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lavee, Doron, E-mail: doron@pareto.co.i
2010-02-15
The paper presents a full cost-benefit analysis of a deposit-refund program for beverage containers in Israel. We examine all cost elements of the program - storage, collection, and treatment costs of empty containers, and all potential benefits - savings in alternative treatment costs (waste collection and landfill disposal), cleaner public spaces, reduction of landfill volumes, energy-savings externalities associated with use of recycled materials, and creation of new workplaces. A wide variety of data resources is employed, and some of the critical issues are examined via several approaches. The main finding of the paper is that the deposit-refund program is clearlymore » economically worthwhile. The paper contributes to the growing body of literature on deposit-refund programs by its complete and detailed analysis of all relevant factors of such a program, and also specifically in its analysis of the savings in alternative waste management costs. This analysis reveals greater savings than are usually assumed, and thus shows the deposit-refund program to be highly efficient.« less
Benefit-Cost Analysis as a Teaching Tool.
ERIC Educational Resources Information Center
Dowd, Richard F.
1980-01-01
Demonstrates how benefit-cost and present-value analyses can be used to assess the potential social benefits of government projects and to illustrate how interest rates affect decision-making in government and business. (AYC)
Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.
NASA Astrophysics Data System (ADS)
Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan
2017-09-01
Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.
An assessment of the industrial cogeneration market for parabolic dish systems
NASA Technical Reports Server (NTRS)
Doane, J. W.
1981-01-01
The value analysis technique used is straightforward. Maximum allowable life-cycle system cost for the cogeneration system is determined as the sum of the present value of fuels displaced plus the present value of revenues from exported power. Each conventional fuel displaced is described by a unit cost in the first year, a uniform annual consumption rate, and a uniform annual escalation rate for unit cost. Exported energy flows are treated the same as displaced energy.
Valuing Non-CO2 GHG Emission Changes in Benefit-Cost ...
The climate impacts of greenhouse gas (GHG) emissions impose social costs on society. To date, EPA has not had an approach to estimate the economic benefits of reducing emissions of non-CO2 GHGs (or the costs of increasing them) that is consistent with the methodology underlying the U.S. Government’s current estimates of the social cost of carbon (SCC). A recently published paper presents estimates of the social cost of methane that are consistent with the SCC estimates. The Agency is seeking review of the potential application of these new benefit estimates to benefit cost analysis in relation to current practice in this area. The goal of this project is to improve upon the current treatment of non-CO2 GHG emission impacts in benefit-cost analysis.
Cost Analysis In A Multi-Mission Operations Environment
NASA Technical Reports Server (NTRS)
Newhouse, M.; Felton, L.; Bornas, N.; Botts, D.; Roth, K.; Ijames, G.; Montgomery, P.
2014-01-01
Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the decreasing flight rate. This paper presents the issues encountered during the HOSC cost analysis process, and the associated lessons learned. These lessons can be used when planning for a new multi-mission operations center or in the transformation from a dedicated control center to multi-center operations, as an aid in defining processes that support future cost analysis and estimation. The lessons can also be used by mature serviceoriented, multi-mission control centers to streamline or refine their cost analysis process.
Cost Analysis in a Multi-Mission Operations Environment
NASA Technical Reports Server (NTRS)
Felton, Larry; Newhouse, Marilyn; Bornas, Nick; Botts, Dennis; Ijames, Gayleen; Montgomery, Patty; Roth, Karl
2014-01-01
Spacecraft control centers have evolved from dedicated, single-mission or single mission-type support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multi-mission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the decreasing flight rate. This paper presents the issues encountered during the HOSC cost analysis process, and the associated lessons learned. These lessons can be used when planning for a new multi-mission operations center or in the transformation from a dedicated control center to multi-center operations, as an aid in defining processes that support future cost analysis and estimation. The lessons can also be used by mature service-oriented, multi-mission control centers to streamline or refine their cost analysis process.
A method for the analysis of the benefits and costs for aeronautical research and technology
NASA Technical Reports Server (NTRS)
Williams, L. J.; Hoy, H. H.; Anderson, J. L.
1978-01-01
A relatively simple, consistent, and reasonable methodology for performing cost-benefit analyses which can be used to guide, justify, and explain investments in aeronautical research and technology is presented. The elements of this methodology (labeled ABC-ART for the Analysis of the Benefits and Costs of Aeronautical Research and Technology) include estimation of aircraft markets; manufacturer costs and return on investment versus aircraft price; airline costs and return on investment versus aircraft price and passenger yield; and potential system benefits--fuel savings, cost savings, and noise reduction. The application of this methodology is explained using the introduction of an advanced turboprop powered transport aircraft in the medium range market in 1978 as an example.
Analysis of Advanced Modular Power Systems (AMPS) for Deep Space Exploration
NASA Technical Reports Server (NTRS)
Oeftering, Richard; Soeder, James F.; Beach, Ray
2014-01-01
The Advanced Modular Power Systems (AMPS) project is developing a modular approach to spacecraft power systems for exploration beyond Earth orbit. AMPS is intended to meet the need of reducing the cost of design development, test and integration and also reducing the operational logistics cost of supporting exploration missions. AMPS seeks to establish modular power building blocks with standardized electrical, mechanical, thermal and data interfaces that can be applied across multiple exploration vehicles. The presentation discusses the results of a cost analysis that compares the cost of the modular approach against a traditional non-modular approach.
[Cost analysis of treatment for severe rheumatoid arthritis in a city in southern Brazil].
Buendgens, Fabíola Bagatini; Blatt, Carine Raquel; Marasciulo, Antônio Carlos Estima; Leite, Silvana Nair; Farias, Mareni Rocha
2013-11-01
Treatment of rheumatoid arthritis involves the use of medicines, non-pharmaceutical therapies, medical appointments, and complimentary tests, among other procedures. Based on sources of payment, this article presents the direct medical costs related to treatment of rheumatoid arthritis. The cost analysis included 103 patients with severe rheumatoid arthritis treated at the Specialized Division of Pharmaceutical Care in Florianopolis, Santa Catarina State, Brazil. Total annual direct cost was R$ 2,045,596.55 (approximately one million US dollars), or R$ 19,860.16 per patient/year (slightly less than ten thousand US dollars). Total cost breakdown was as follows: 90.8% for medicines, 2.5% for hospitalizations, 2.2% for complimentary tests, 2.1% for medical appointments, and 2.4% for all other costs. The public sector accounted for 73.6% of the total direct medical costs and 79.3% of the cost of medicines. The cost analysis provided a profile of how a group of individuals with a chronic non-communicable disease that requires resources circulates in the public-private mix that characterizes the Brazilian health system.
Outline of cost-benefit analysis and a case study
NASA Technical Reports Server (NTRS)
Kellizy, A.
1978-01-01
The methodology of cost-benefit analysis is reviewed and a case study involving solar cell technology is presented. Emphasis is placed on simplifying the technique in order to permit a technical person not trained in economics to undertake a cost-benefit study comparing alternative approaches to a given problem. The role of economic analysis in management decision making is discussed. In simplifying the methodology it was necessary to restrict the scope and applicability of this report. Additional considerations and constraints are outlined. Examples are worked out to demonstrate the principles. A computer program which performs the computational aspects appears in the appendix.
Opportunity Analysis and Selection: 50 or More Ways To Reduce Costs. Mendip Papers.
ERIC Educational Resources Information Center
Kedney, Bob; Davies, Trefor
This paper discusses activity analysis and the identification of options as the first two stages of a structured approach to achieving budget savings at postsecondary institutions, focusing on schools and practices in the United Kingdom. It presents five checklists of opportunities for reducing spending and controlling costs. The checklists cover:…
ERIC Educational Resources Information Center
García, Sandra; Saavedra, Juan E.
2017-01-01
We meta-analyze for impact and cost-effectiveness 94 studies from 47 conditional cash transfer programs in low- and middle-income countries worldwide, focusing on educational outcomes that include enrollment, attendance, dropout, and school completion. To conceptually guide and interpret the empirical findings of our meta-analysis, we present a…
Comparative Benefit-Cost Analysis of the Abecedarian Program and Its Policy Implications
ERIC Educational Resources Information Center
Barnett, W. S.; Masse, Leonard N.
2007-01-01
Child care and education are to some extent joint products of preschool programs, but public policy and research frequently approach these two goals independently. We present a benefit-cost analysis of a preschool program that provided intensive education during full-day child care. Data were obtained from a randomized trial with longitudinal…
Status of risk-benefit analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Van Horn, A.J.; Wilson, R.
1976-12-01
The benefits and deficiencies of cost benefit analysis are reviewed. It is pointed out that, if decision making involving risks and benefits is to improve, more attention must be paid to the clear presentation of the assumptions, values, and results. Reports need to present concise summaries which convey the uncertainties and limitations of the analysis in addition to the matrix of costs, risks, and benefits. As the field of risk-benefit analysis advances the estimation of risks and benefits will become more precise and implicit valuations will be made more explicit. Corresponding improvements must also be made to enhance communications betweenmore » the risk-benefit analyst and the accountable decision maker.« less
NASA Technical Reports Server (NTRS)
1974-01-01
A detailed analysis is presented of each selected equipment item, and suitability and cost analyses were documented by equipment item. Tradeoffs of alternative specification requirements are presented which include possible relaxation of vibration, material control, fungus and corrosion requirements for experiment equipment. An additional tradeoff was performed to determine whether it is cost effective to modify experiment equipment to be compatible with a 28-volt dc power source rather than the conventional 110-volt ac source. Programmatic analysis data are given which were used as the basis for the extension of results from the analyses of specific equipment items to the entire spacelab experiment program.
Cost Analysis for Large Civil Transport Rotorcraft
NASA Technical Reports Server (NTRS)
Coy, John J.
2006-01-01
This paper presents cost analysis of purchase price and DOC+I (direct operating cost plus interest) that supports NASA s study of three advanced rotorcraft concepts that could enter commercial transport service within 10 to 15 years. The components of DOC+I are maintenance, flight crew, fuel, depreciation, insurance, and finance. The cost analysis aims at VTOL (vertical takeoff and landing) and CTOL (conventional takeoff and landing) aircraft suitable for regional transport service. The resulting spreadsheet-implemented cost models are semi-empirical and based on Department of Transportation and Army data from actual operations of such aircraft. This paper describes a rationale for selecting cost tech factors without which VTOL is more costly than CTOL by a factor of 10 for maintenance cost and a factor of two for purchase price. The three VTOL designs selected for cost comparisons meet the mission requirement to fly 1,200 nautical miles at 350 knots and 30,000 ft carrying 120 passengers. The lowest cost VTOL design is a large civil tilt rotor (LCTR) aircraft. With cost tech factors applied, the LCTR is reasonably competitive with the Boeing 737-700 when operated in economy regional service following the business model of the selected baseline operation, that of Southwest Airlines.
NASA Technical Reports Server (NTRS)
Shiokari, T.
1975-01-01
The feasibility and cost savings of using flight-proven components in designing spacecraft were investigated. The components analyzed were (1) large space telescope, (2) stratospheric aerosol and gas equipment, (3) mapping mission, (4) solar maximum mission, and (5) Tiros-N. It is concluded that flight-proven hardware can be used with not-too-extensive modification, and significant savings can be realized. The cost savings for each component are presented.
The analysis of cost-effectiveness of implant and conventional fixed dental prosthesis.
Chun, June Sang; Har, Alix; Lim, Hyun-Pil; Lim, Hoi-Jeong
2016-02-01
This study conducted an analysis of cost-effectiveness of the implant and conventional fixed dental prosthesis (CFDP) from a single treatment perspective. The Markov model for cost-effectiveness analysis of the implant and CFDP was carried out over maximum 50 years. The probabilistic sensitivity analysis was performed by the 10,000 Monte-Carlo simulations, and cost-effectiveness acceptability curves (CEAC) were also presented. The results from meta-analysis studies were used to determine the survival rates and complication rates of the implant and CFDP. Data regarding the cost of each treatment method were collected from University Dental Hospital and Statistics Korea for 2013. Using the results of the patient satisfaction survey study, quality-adjusted prosthesis year (QAPY) of the implant and CFDP strategy was evaluated with annual discount rate. When only the direct cost was considered, implants were more cost-effective when the willingness to pay (WTP) was more than 10,000 won at 10(th) year after the treatment, and more cost-effective regardless of the WTP from 20(th) year after the prosthodontic treatment. When the indirect cost was added to the direct cost, implants were more cost-effective only when the WTP was more than 75,000 won at the 10(th) year after the prosthodontic treatment, more than 35,000 won at the 20(th) year after prosthodontic treatment. The CFDP was more cost-effective unless the WTP was more than 75,000 won at the 10(th) year after prosthodontic treatment. But the cost-effectivenss tendency changed from CFDP to implant as time passed.
Cost considerations in using simulations for medical training.
Fletcher, J D; Wind, Alexander P
2013-10-01
This article reviews simulation used for medical training, techniques for assessing simulation-based training, and cost analyses that can be included in such assessments. Simulation in medical training appears to take four general forms: human actors who are taught to simulate illnesses and ailments in standardized ways; virtual patients who are generally presented via computer-controlled, multimedia displays; full-body manikins that simulate patients using electronic sensors, responders, and controls; and part-task anatomical simulations of various body parts and systems. Techniques for assessing costs include benefit-cost analysis, return on investment, and cost-effectiveness analysis. Techniques for assessing the effectiveness of simulation-based medical training include the use of transfer effectiveness ratios and incremental transfer effectiveness ratios to measure transfer of knowledge and skill provided by simulation to the performance of medical procedures. Assessment of costs and simulation effectiveness can be combined with measures of transfer using techniques such as isoperformance analysis to identify ways of minimizing costs without reducing performance effectiveness or maximizing performance without increasing costs. In sum, economic analysis must be considered in training assessments if training budgets are to compete successfully with other requirements for funding. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.
Exploring the Use of Cost-Benefit Analysis to Compare Pharmaceutical Treatments for Menorrhagia.
Sanghera, Sabina; Frew, Emma; Gupta, Janesh Kumar; Kai, Joe; Roberts, Tracy Elizabeth
2015-09-01
The extra-welfarist theoretical framework tends to focus on health-related quality of life, whilst the welfarist framework captures a wider notion of well-being. EQ-5D and SF-6D are commonly used to value outcomes in chronic conditions with episodic symptoms, such as heavy menstrual bleeding (clinically termed menorrhagia). Because of their narrow-health focus and the condition's periodic nature these measures may be unsuitable. A viable alternative measure is willingness to pay (WTP) from the welfarist framework. We explore the use of WTP in a preliminary cost-benefit analysis comparing pharmaceutical treatments for menorrhagia. A cost-benefit analysis was carried out based on an outcome of WTP. The analysis is based in the UK primary care setting over a 24-month time period, with a partial societal perspective. Ninety-nine women completed a WTP exercise from the ex-ante (pre-treatment/condition) perspective. Maximum average WTP values were elicited for two pharmaceutical treatments, levonorgestrel-releasing intrauterine system (LNG-IUS) and oral treatment. Cost data were offset against WTP and the net present value derived for treatment. Qualitative information explaining the WTP values was also collected. Oral treatment was indicated to be the most cost-beneficial intervention costing £107 less than LNG-IUS and generating £7 more benefits. The mean incremental net present value for oral treatment compared with LNG-IUS was £113. The use of the WTP approach was acceptable as very few protests and non-responses were observed. The preliminary cost-benefit analysis results recommend oral treatment as the first-line treatment for menorrhagia. The WTP approach is a feasible alternative to the conventional EQ-5D/SF-6D approaches and offers advantages by capturing benefits beyond health, which is particularly relevant in menorrhagia.
Implementation of a cost-accounting model in a biobank: practical implications.
Gonzalez-Sanchez, Maria Beatriz; Lopez-Valeiras, Ernesto; García-Montero, Andres C
2014-01-01
Given the state of global economy, cost measurement and control have become increasingly relevant over the past years. The scarcity of resources and the need to use these resources more efficiently is making cost information essential in management, even in non-profit public institutions. Biobanks are no exception. However, no empirical experiences on the implementation of cost accounting in biobanks have been published to date. The aim of this paper is to present a step-by-step implementation of a cost-accounting tool for the main production and distribution activities of a real/active biobank, including a comprehensive explanation on how to perform the calculations carried out in this model. Two mathematical models for the analysis of (1) production costs and (2) request costs (order management and sample distribution) have stemmed from the analysis of the results of this implementation, and different theoretical scenarios have been prepared. Global analysis and discussion provides valuable information for internal biobank management and even for strategic decisions at the research and development governmental policies level.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Friedman, B.; Ardani, K.; Feldman, D.
2013-10-01
This report presents results from the second U.S. Department of Energy (DOE) sponsored, bottom-up data-collection and analysis of non-hardware balance-of-system costs -- often referred to as 'business process' or 'soft' costs -- for U.S. residential and commercial photovoltaic (PV) systems. In service to DOE's SunShot Initiative, annual expenditure and labor-hour-productivity data are analyzed to benchmark 2012 soft costs related to (1) customer acquisition and system design (2) permitting, inspection, and interconnection (PII). We also include an in-depth analysis of costs related to financing, overhead, and profit. Soft costs are both a major challenge and a major opportunity for reducing PVmore » system prices and stimulating SunShot-level PV deployment in the United States. The data and analysis in this series of benchmarking reports are a step toward the more detailed understanding of PV soft costs required to track and accelerate these price reductions.« less
Antibiotic pharmacoeconomics: an attempt to find the real cost of hospital antibiotic prescribing.
Kerr, J. R.; Barr, J. G.; Smyth, E. T.; O'Hare, J.; Bell, P. M.; Callender, M. E.
1993-01-01
Antibiotics account for a large part of all hospital pharmacy budgets, but the actual cost of their prescription is unknown. These costs include intravenous administration, labour, serum antibiotic assay, monitoring of haematological and biochemical indices, disposal of sharps and adverse effects. An in-house method of costing antibiotic therapy is presented, to quantify these hidden expenses. Since not only an awareness, but an accurate quantification, of hidden costs is required, a study of various hospital procedures relating directly to antibiotic therapy was undertaken in an acute medical ward; this involved the identification of particular staff members performing various procedures, consumables used and time taken. The cost of five-day courses of gentamicin, penicillin G, ampicillin, flucloxacillin, cefuroxime, ceftotaxime and erythromycin has been calculated; drug and hidden costs for each are presented graphically for comparison. The breakdown cost for gentamicin is presented to illustrate the method. The costing of adverse effects has not been attempted. We suggest that costings of this sort are used in cost-benefit analysis of antibiotic use. These calculations have been incorporated into a computer spreadsheet and this costing service will be offered to clinical areas of our hospital. PMID:8516976
NASA Technical Reports Server (NTRS)
Crosetti, M. R.
1985-01-01
The sensitivity of the National Photovoltaic Research Program goals to changes in individual photovoltaic system parameters is explored. Using the relationship between lifetime cost and system performance parameters, tests were made to see how overall photovoltaic system energy costs are affected by changes in the goals set for module cost and efficiency, system component costs and efficiencies, operation and maintenance costs, and indirect costs. The results are presented in tables and figures for easy reference.
NASA Technical Reports Server (NTRS)
1974-01-01
An analysis of the design and cost tradeoff aspects of the Earth Observatory Satellite (EOS) development is presented. The design/cost factors that affect a series of mission/system level concepts are discussed. The subjects considered are as follows: (1) spacecraft subsystem cost tradeoffs, (2) ground system cost tradeoffs, and (3) program cost summary. Tables of data are provided to summarize the results of the analyses. Illustrations of the various spacecraft configurations are included.
NASA Technical Reports Server (NTRS)
1974-01-01
An analysis of low cost management approaches for the development of the Earth Observatory Satellite (EOS) is presented. The factors of the program which tend to increase costs are identified. The NASA/Industry interface is stressed to show how the interface can be improved to produce reduced program costs. Techniques and examples of cost reduction which can be applied to the EOS program are tabulated. Specific recommendations for actions to be taken to reduce costs in prescribed areas are submitted.
Decision science and cervical cancer.
Cantor, Scott B; Fahs, Marianne C; Mandelblatt, Jeanne S; Myers, Evan R; Sanders, Gillian D
2003-11-01
Mathematical modeling is an effective tool for guiding cervical cancer screening, diagnosis, and treatment decisions for patients and policymakers. This article describes the use of mathematical modeling as outlined in five presentations from the Decision Science and Cervical Cancer session of the Second International Conference on Cervical Cancer held at The University of Texas M. D. Anderson Cancer Center, April 11-14, 2002. The authors provide an overview of mathematical modeling, especially decision analysis and cost-effectiveness analysis, and examples of how it can be used for clinical decision making regarding the prevention, diagnosis, and treatment of cervical cancer. Included are applications as well as theory regarding decision science and cervical cancer. Mathematical modeling can answer such questions as the optimal frequency for screening, the optimal age to stop screening, and the optimal way to diagnose cervical cancer. Results from one mathematical model demonstrated that a vaccine against high-risk strains of human papillomavirus was a cost-effective use of resources, and discussion of another model demonstrated the importance of collecting direct non-health care costs and time costs for cost-effectiveness analysis. Research presented indicated that care must be taken when applying the results of population-wide, cost-effectiveness analyses to reduce health disparities. Mathematical modeling can encompass a variety of theoretical and applied issues regarding decision science and cervical cancer. The ultimate objective of using decision-analytic and cost-effectiveness models is to identify ways to improve women's health at an economically reasonable cost. Copyright 2003 American Cancer Society.
Public Concepts of the Values and Costs of Higher Education, 1963-1974. A Preliminary Analysis.
ERIC Educational Resources Information Center
Minor, Michael J.; Murray, James R.
Statistical data are presented on interviews conducted through the Continuous National Survey (CNS) at the National Opinion Research Center in Chicago and based on results reprinted from "Public Concepts of the Values and Costs of Higher Education," by Angus Campbell and William C. Eckerman. The CNS results presented in this report are…
The feasibility of solar energy usage on Red River Army Depot. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crowder, G.W.
This feasibility study considers the usage of solar energy to heat and cool the main office buildings on the Red River Army Depot, Texarkana Texas. Solar energy costs are compared with the present heating and cooling system costs with an economic analysis using the annual worth and present worth methods. (GRA)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sargent, S.A.; Pierson, T.R.; Steffe, J.F.
Apple juice processors generating up to 100 ton/day (90,718 kg/day) of pomace and incurring no disposal costs could not economically invest in a pile burning, fluidized-bed or suspension-fired system at present fossil fuel costs. Cost analysis is warranted for situations in which disposal costs are greater than $9.15/ton ($8.30/1000 kg) or in which fossil fuel price increases are expected in excess of 25%.
Annual health examination program, Ames Research Center
NASA Technical Reports Server (NTRS)
Hughes, L.; Ladou, J.
1975-01-01
A cost analysis of a low-volume multiphasic health testing program is presented. The results indicate that unit costs are similar to those of high-volume automated programs. The comparability in unit cost appears to result from the savings in personnel and space requirements of the smaller program as compared with the larger ones.
Preliminary Multi-Variable Parametric Cost Model for Space Telescopes
NASA Technical Reports Server (NTRS)
Stahl, H. Philip; Hendrichs, Todd
2010-01-01
This slide presentation reviews creating a preliminary multi-variable cost model for the contract costs of making a space telescope. There is discussion of the methodology for collecting the data, definition of the statistical analysis methodology, single variable model results, testing of historical models and an introduction of the multi variable models.
Life cycle costing as a decision making tool for technology acquisition in radio-diagnosis
Chakravarty, Abhijit; Debnath, Jyotindu
2014-01-01
Background Life cycle costing analysis is an emerging conceptual tool to validate capital investment in healthcare. Methods A preliminary study was done to analyze the long-term cost impact of acquiring a new 3 T MRI system when compared to technological upgradation of the existing 1.5 T MRI system with a view to evolve a decision matrix for correct investment planning and technology management. Operating costing method was utilized to estimate cost per unit MRI scan, costing inputs were considered for the existing 1.5 T and the proposed 3 T machine. Cost for each expected year in the life span of both 1.5 T and 3 T MRI scan options were then discounted to its Net Present Value. Net Present Value thus calculated for both the alternative options of 1.5 T and 3 T MRI machine was charted along with various intangible but critical Figures of Merit (FOM) to create a decision matrix for capital investment planning. Result Considering all fixed and variable costs contributing towards assumed operation, unit cost per MRI procedure was found to be Rs. 4244.58 for the 1.5 T upgrade and Rs. 6059.37 for the new 3 T MRI machine. Life Cycle Cost Analysis of the proposed 1.5 T upgrade and new 3 T machine showed a Net Present Value of Rs. 42,148,587.80 and Rs. 27,587,842.38 respectively. Conclusion The utility of life cycle costing as a strategic decision making tool towards evaluating alternative options for capital investment planning in health care environment is reiterated. PMID:25609862
Toward a Cost/Benefit Analysis of Physical Fitness
Shephard, Roy J.
1986-01-01
This article, which is based, in part, on a paper presented to the Canadian Association of Sport Sciences, Quebec City, in November 1985, evaluates the principles of cost/benefit and cost-effectiveness analysis in the specific context of fitness programming. Because of difficulties in valuing all aspects of fitness and health—particularly survival after retirement—cost-effectiveness analysis is generally preferred. Allowance must be made for inflation, the discount rate (except in a “steady state” analysis), marginal costs of program expansion, opportunity costs incurred by participants, the changing fabric of society, the economic multiplication of investment in fitness, and anticipated participation rates. Benefits may be observed by the individual (improved health), the corporation (reduced turnover and absenteeism, increased productivity, fewer injuries), and the state (reduced direct and indirect costs of illness, improved lifestyle, reduced demand for geriatric services). Program costs vary widely with the activity that is undertaken, but even daily walking involves the participant in some expense. Employee programs often cost $500-$750 per participant/year, while, depending on the sport and local speculation by land “developers”, community programs may cost $175-$1,000 per participant/year. Cost/effectiveness analyses allow governments to reach informed decisions, but they cannot always answer associated ethical problems such as determining the value of human life, and the rights of the individual as opposed to those of society. PMID:21267294
A cost-benefit analysis of landfill mining and material recycling in China
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, Chuanbin, E-mail: cbzhou@rcees.ac.cn; Gong, Zhe; Hu, Junsong
Highlights: • Assessing the economic feasibility of landfill mining. • We applied a cost-benefit analysis model for landfill mining. • Four material cycling and energy recovery scenarios were designed. • We used net present value to evaluate the cost-benefit efficiency. - Abstract: Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, whichmore » is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7 USD ton{sup −1}. The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care.« less
Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yu, Y. H.; Jenne, D. S.; Thresher, R.
This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversionmore » chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.« less
The unwritten price of cosmetic tourism: an observational study and cost analysis.
Miyagi, K; Auberson, D; Patel, A J; Malata, C M
2012-01-01
Cosmetic tourism, driven by the promise of inexpensive operations abroad, is increasingly popular despite warnings from professional bodies regarding associated risks. Increasing numbers of individuals have presented to our department requesting NHS treatment of complications from such surgery. We set out to characterize these patients and evaluate costs incurred through their assessment and management. An observational study was conducted from 2007 to 2009 on patients presenting to a tertiary referral Plastic Surgery practice with complications of cosmetic tourism surgery. Demographic characteristics, as well as those related to the operation, were recorded. Hospital patient flow pathways were constructed, cost analysis performed using Patient Level Costing, and expenditure and profitability calculated. Nineteen patients presented within the study period. Most operations were performed in Europe or Asia, and were primarily breast augmentation procedures (n=13). The principal complications were wound infection or dehiscence, and poor cosmetic results. Eleven patients received NHS treatment, at a cost of £120,841. The mean cost for all patients' management was £6360 (range: £114-£57,968), rising to £10,878 for those accepted for treatment. For 8 of the 9 patients (89%) for whom full patient level costing was available, the hospital incurred a financial loss. The costs to the NHS of managing complications of cosmetic tourism are substantial, and underestimated by central funding agencies. Copyright © 2011 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Cost-effectiveness analysis of treatment alternatives for beef bulls with preputial prolapse.
Kasari, T R; McGrann, J M; Hooper, R N
1997-10-01
To develop an economic model for comparing cost-effectiveness of medical and surgical treatment versus replacement of beef bulls with preputial prolapse. Economic analysis. Estimates determined from medical records of bulls treated for preputial prolapse at our hospital and from information about treatment of bulls published elsewhere. Annual depreciation cost for treatment (ADC(T)) and replacement (ADC(R)) were calculated. Total investment for an injured bull equaled the sum of salvage value, maintenance cost, and expected cost of the treatment option under consideration. Total investment for a replacement bull was purchase price. Net present value of cost was calculated for each year of bull use. Sensitivity analyses were constructed to determine the value that would warrant treatment of an injured bull. The decision to treat was indicated when ADC(T) was less than ADC(R). In our example, it was more cost-effective for owners to cull an injured bull. The ADC(R) was $97 less than ADC(T) for medical treatment ($365 vs $462) and $280 less than ADC(T) for surgical treatment ($365 vs $645). Likewise, net present value of cost values indicated that it was more cost-effective for owners to cull an injured bull. Sensitivity analysis indicated treatment decisions were justified on the basis of replacement value or planned number of breeding seasons remaining for the bull. The model described here can be used by practitioners to provide an objective basis to guide decision making of owners who seek advice on whether to treat or replace bulls with preputial prolapse.
Zhang, Pengfei; Wen, Feng; Fu, Ping; Yang, Yu; Li, Qiu
2017-07-31
The effectiveness of the addition of docetaxel and/or zoledronic acid to the standard of care (SOC) for hormone-naive prostate cancer has been evaluated in the STAMPEDE trial. The object of the present analysis was to evaluate the cost-effectiveness of these treatment options in the treatment of advanced hormone-naive prostate cancer in China. A cost-effectiveness analysis using a Markov model was carried out from the Chinese societal perspective. The efficacy data were obtained from the STAMPEDE trial and health utilities were derived from previous studies. Transition probabilities were calculated based on the survival in each group. The primary endpoint in the analysis was the incremental cost-effectiveness ratio (ICER), and model uncertainties were explored by 1-way sensitivity analysis and probabilistic sensitivity analysis. SOC alone generated an effectiveness of 2.65 quality-adjusted life years (QALYs) at a lifetime cost of $20,969.23. At a cost of $25,001.34, SOC plus zoledronic acid was associated with 2.69 QALYs, resulting in an ICER of $100,802.75/QALY compared with SOC alone. SOC plus docetaxel gained an effectiveness of 2.85 QALYs at a cost of $28,764.66, while the effectiveness and cost data in the SOC plus zoledronic acid/docetaxel group were 2.78 QALYs and $32,640.95. Based on the results of the analysis, SOC plus zoledronic acid, SOC plus docetaxel, and SOC plus zoledronic acid/docetaxel are unlikely to be cost-effective options in patients with advanced hormone-naive prostate cancer compared with SOC alone.
Improving The Discipline of Cost Estimation and Analysis
NASA Technical Reports Server (NTRS)
Piland, William M.; Pine, David J.; Wilson, Delano M.
2000-01-01
The need to improve the quality and accuracy of cost estimates of proposed new aerospace systems has been widely recognized. The industry has done the best job of maintaining related capability with improvements in estimation methods and giving appropriate priority to the hiring and training of qualified analysts. Some parts of Government, and National Aeronautics and Space Administration (NASA) in particular, continue to need major improvements in this area. Recently, NASA recognized that its cost estimation and analysis capabilities had eroded to the point that the ability to provide timely, reliable estimates was impacting the confidence in planning many program activities. As a result, this year the Agency established a lead role for cost estimation and analysis. The Independent Program Assessment Office located at the Langley Research Center was given this responsibility. This paper presents the plans for the newly established role. Described is how the Independent Program Assessment Office, working with all NASA Centers, NASA Headquarters, other Government agencies, and industry, is focused on creating cost estimation and analysis as a professional discipline that will be recognized equally with the technical disciplines needed to design new space and aeronautics activities. Investments in selected, new analysis tools, creating advanced training opportunities for analysts, and developing career paths for future analysts engaged in the discipline are all elements of the plan. Plans also include increasing the human resources available to conduct independent cost analysis of Agency programs during their formulation, to improve near-term capability to conduct economic cost-benefit assessments, to support NASA management's decision process, and to provide cost analysis results emphasizing "full-cost" and "full-life cycle" considerations. The Agency cost analysis improvement plan has been approved for implementation starting this calendar year. Adequate financial and human resources are being made available to accomplish the goals of this important effort, and all indications are that NASA's cost estimation and analysis core competencies will be substantially improved within the foreseeable future.
NASA Technical Reports Server (NTRS)
Rader, W. P.; Barrett, S.; Raratono, J.; Payne, K. R.
1976-01-01
The current predicted acoustic environment for the shuttle orbiter payload bay will produce random vibration environments for payload components and subsystems which potentially will result in design, weight and cost penalties if means of protecting the payloads are not developed. Results are presented of a study to develop, through design and cost effectiveness trade studies, conceptual noise suppression device designs for space shuttle payloads. The impact of noise suppression on environmental levels and associated test costs, and on test philosophy for the various payload classes is considered with the ultimate goal of reducing payload test costs. Conclusions and recommendations are presented.
Cost-of-illness studies: concepts, scopes, and methods
2014-01-01
Liver diseases are one of the main causes of death, and their ever-increasing prevalence is threatening to cause significant damage both to individuals and society as a whole. This damage is especially serious for the economically active population in Korea. From the societal perspective, it is therefore necessary to consider the economic impacts associated with liver diseases, and identify interventions that can reduce the burden of these diseases. The cost-of-illness study is considered to be an essential evaluation technique in health care. By measuring and comparing the economic burdens of diseases to society, such studies can help health-care decision-makers to set up and prioritize health-care policies and interventions. Using economic theories, this paper introduces various study methods that are generally applicable to most disease cases for estimating the costs of illness associated with mortality, morbidity, disability, and other disease characteristics. It also presents concepts and scopes of costs along with different cost categories from different research perspectives in cost estimations. By discussing the epidemiological and economic grounds of the cost-of-illness study, the reported results represent useful information about several evaluation techniques at an advanced level, such as cost-benefit analysis, cost-effectiveness analysis, and cost-utility analysis. PMID:25548737
Cost-of-illness studies: concepts, scopes, and methods.
Jo, Changik
2014-12-01
Liver diseases are one of the main causes of death, and their ever-increasing prevalence is threatening to cause significant damage both to individuals and society as a whole. This damage is especially serious for the economically active population in Korea. From the societal perspective, it is therefore necessary to consider the economic impacts associated with liver diseases, and identify interventions that can reduce the burden of these diseases. The cost-of-illness study is considered to be an essential evaluation technique in health care. By measuring and comparing the economic burdens of diseases to society, such studies can help health-care decision-makers to set up and prioritize health-care policies and interventions. Using economic theories, this paper introduces various study methods that are generally applicable to most disease cases for estimating the costs of illness associated with mortality, morbidity, disability, and other disease characteristics. It also presents concepts and scopes of costs along with different cost categories from different research perspectives in cost estimations. By discussing the epidemiological and economic grounds of the cost-of-illness study, the reported results represent useful information about several evaluation techniques at an advanced level, such as cost-benefit analysis, cost-effectiveness analysis, and cost-utility analysis.
Design and analysis of aluminum/air battery system for electric vehicles
NASA Astrophysics Data System (ADS)
Yang, Shaohua; Knickle, Harold
Aluminum (Al)/air batteries have the potential to be used to produce power to operate cars and other vehicles. These batteries might be important on a long-term interim basis as the world passes through the transition from gasoline cars to hydrogen fuel cell cars. The Al/air battery system can generate enough energy and power for driving ranges and acceleration similar to gasoline powered cars. From our design analysis, it can be seen that the cost of aluminum as an anode can be as low as US 1.1/kg as long as the reaction product is recycled. The total fuel efficiency during the cycle process in Al/air electric vehicles (EVs) can be 15% (present stage) or 20% (projected) comparable to that of internal combustion engine vehicles (ICEs) (13%). The design battery energy density is 1300 Wh/kg (present) or 2000 Wh/kg (projected). The cost of battery system chosen to evaluate is US 30/kW (present) or US$ 29/kW (projected). Al/air EVs life-cycle analysis was conducted and compared to lead/acid and nickel metal hydride (NiMH) EVs. Only the Al/air EVs can be projected to have a travel range comparable to ICEs. From this analysis, Al/air EVs are the most promising candidates compared to ICEs in terms of travel range, purchase price, fuel cost, and life-cycle cost.
Value of crops: Quantity, quality and cost price. [algae as a nutritional supplement
NASA Technical Reports Server (NTRS)
Meyer, C.
1979-01-01
Possibilities of using algae as a nutritional supplement are examined. The nutritional value and protein content of spirulines of blue algae are discussed. A cost analysis of growing them artificially is presented.
Cost analysis of Virginia system for processing accident data.
DOT National Transportation Integrated Search
1984-01-01
The objectives of this study were to identify present system costs and deficiencies, determine the economic feasibility of alternative system configurations, and make recommendations for improvements. The study focused on the procedures used to proce...
Low Cost Mission Operations Workshop. [Space Missions
NASA Technical Reports Server (NTRS)
1994-01-01
The presentations given at the Low Cost (Space) Mission Operations (LCMO) Workshop are outlined. The LCMO concepts are covered in four introductory sections: Definition of Mission Operations (OPS); Mission Operations (MOS) Elements; The Operations Concept; and Mission Operations for Two Classes of Missions (operationally simple and complex). Individual presentations cover the following topics: Science Data Processing and Analysis; Mis sion Design, Planning, and Sequencing; Data Transport and Delivery, and Mission Coordination and Engineering Analysis. A list of panelists who participated in the conference is included along with a listing of the contact persons for obtaining more information concerning LCMO at JPL. The presentation of this document is in outline and graphic form.
The National Map: Benefits at what cost?
Halsing, D.L.; Theissen, K.M.; Bernknopf, R.L.
2004-01-01
The U.S. Geological Survey has conducted a cost-benefit analysis of The National Map, and determined that, during its 30-year projected lifespan, the project will likely bring a net present value of benefits to society of $2.05 billion. Such a survey enhances the United States' ability to access, integrate, and apply geospatial data at global, national, and local scales. This paper gives an overview on the underlying economic model for evaluating program benefits and presents the primary findings as well as a sensitivity analysis assessing the robustness of the results.
Study 2.6 operations analysis mission characterization
NASA Technical Reports Server (NTRS)
Wolfe, R. R.
1973-01-01
An analysis of the current operations concepts of NASA and DoD is presented to determine if alternatives exist which may improve the utilization of resources. The final product is intended to show how sensitive these ground rules and design approaches are relative to the total cost of doing business. The results are comparative in nature, and assess one concept against another as opposed to establishing an absolute cost value for program requirements. An assessment of the mission characteristics is explained to clarify the intent, scope, and direction of this effort to improve the understanding of what is to be accomplished. The characterization of missions is oriented toward grouping missions which may offer potential economic benefits by reducing overall program costs. Program costs include design, development, testing, and engineering, recurring unit costs for logistic vehicles, payload costs. and direct operating costs.
National law enforcement telecommunications network
NASA Technical Reports Server (NTRS)
Reilly, N. B.; Garrison, G. W.; Sohn, R. L.; Gallop, D. L.; Goldstein, B. L.
1975-01-01
Alternative approaches are analyzed to a National Law Enforcement Telecommunications Network (NALECOM) designed to service all state-to-state and state-to-national criminal justice communications traffic needs in the United States. Network topology options were analyzed, and equipment and personnel requirements for each option were defined in accordance with NALECOM functional specifications and design guidelines. Evaluation criteria were developed and applied to each of the options leading to specific conclusions. Detailed treatments of methods for determining traffic requirements, communication line costs, switcher configurations and costs, microwave costs, satellite system configurations and costs, facilities, operations and engineering costs, network delay analysis and network availability analysis are presented. It is concluded that a single regional switcher configuration is the optimum choice based on cost and technical factors. A two-region configuration is competitive. Multiple-region configurations are less competitive due to increasing costs without attending benefits.
Cost Analysis of an Office-based Surgical Suite
LaBove, Gabrielle
2016-01-01
Introduction: Operating costs are a significant part of delivering surgical care. Having a system to analyze these costs is imperative for decision making and efficiency. We present an analysis of surgical supply, labor and administrative costs, and remuneration of procedures as a means for a practice to analyze their cost effectiveness; this affects the quality of care based on the ability to provide services. The costs of surgical care cannot be estimated blindly as reconstructive and cosmetic procedures have different percentages of overhead. Methods: A detailed financial analysis of office-based surgical suite costs for surgical procedures was determined based on company contract prices and average use of supplies. The average time spent on scheduling, prepping, and doing the surgery was factored using employee rates. Results: The most expensive, minor procedure supplies are suture needles. The 4 most common procedures from the most expensive to the least are abdominoplasty, breast augmentation, facelift, and lipectomy. Conclusions: Reconstructive procedures require a greater portion of collection to cover costs. Without the adjustment of both patient and insurance remuneration in the practice, the ability to provide quality care will be increasingly difficult. PMID:27536482
Biological and chemical removal of Cr(VI) from waste water: cost and benefit analysis.
Demir, Aynur; Arisoy, Münevver
2007-08-17
The objective of the present study is cost and benefit analysis of biological and chemical removal of hexavalent chromium [Cr(VI)] ions. Cost and benefit analysis were done with refer to two separate studies on removal of Cr(VI), one of heavy metals with a crucial role concerning increase in environmental pollution and disturbance of ecological balance, through biological adsorption and chemical ion-exchange. Methods of biological and chemical removal were compared with regard to their cost and percentage in chrome removal. According to the result of the comparison, cost per unit in chemical removal was calculated 0.24 euros and the ratio of chrome removal was 99.68%, whereas those of biological removal were 0.14 and 59.3% euros. Therefore, it was seen that cost per unit in chemical removal and chrome removal ratio were higher than those of biological removal method. In the current study where chrome removal is seen as immeasurable benefit in terms of human health and the environment, percentages of chrome removal were taken as measurable benefit and cost per unit of the chemicals as measurable cost.
ERIC Educational Resources Information Center
Nelson, F. Howard; Hess, G. Alfred, Jr.
This draft document presents an analysis of all major educational reform proposals before the Illinois General Assembly, assessing the costs of implementation and what benefits might be expected for the funding levels contained in the proposals themselves. The 18 areas examined are (1) student testing; (2) student retention/remediation; (3)…
ERIC Educational Resources Information Center
Gibbard, Deborah; Coglan, Louisa; MacDonald, John
2004-01-01
Background: Parents and professionals can both play a role in improving children's expressive language development and a number of alternative models of delivery exist that involve different levels of input by these two groups. However, these alternative treatments have not been subject to rigorous comparative analysis in terms of both cost and…
Pinior, Beate; Loitsch, Angelika; Stockreiter, Simon; Hutter, Sabine; Richter, Veronika; Lebl, Karin; Schwermer, Heinzpeter; Käsbohrer, Annemarie
2018-01-01
Bluetongue virus (BTV) is an emerging transboundary disease in Europe, which can cause significant production losses among ruminants. The analysis presented here assessed the costs of BTV surveillance and vaccination programmes in Austria and Switzerland between 2007 and 2016. Costs were compared with respect to time, type of programme, geographical area and who was responsible for payment. The total costs of the BTV vaccination and surveillance programmes in Austria amounted to €23.6 million, whereas total costs in Switzerland were €18.3 million. Our analysis demonstrates that the costs differed between years and geographical areas, both within and between the two countries. Average surveillance costs per animal amounted to approximately €3.20 in Austria compared with €1.30 in Switzerland, whereas the average vaccination costs per animal were €6.20 in Austria and €7.40 in Switzerland. The comparability of the surveillance costs is somewhat limited, however, due to differences in each nation’s surveillance (and sampling) strategy. Given the importance of the export market for cattle production, investments in such programmes are more justified for Austria than for Switzerland. The aim of the retrospective assessment presented here is to assist veterinary authorities in planning and implementing cost-effective and efficient control strategies for emerging livestock diseases. PMID:29363572
Risk Costs for New Dams: Economic Analysis and Effects of Monitoring
NASA Astrophysics Data System (ADS)
Paté-Cornell, M. Elisabeth; Tagaras, George
1986-01-01
This paper presents new developments and illustrations of the introduction of risk and costs in cost-benefit analysis for new dams. The emphasis is on a method of evaluation of the risk costs based on the structure of the local economy. Costs to agricultural property as well as residential, commercial, industrial, and public property are studied in detail. Of particular interest is the case of sequential dam failure and the evaluation of the risk costs attributable to a new dam upstream from an existing one. Three real cases are presented as illustrations of the method: the Auburn Dam, the Dickey-Lincoln School Project, and the Teton Dam, which failed in 1976. This last case provides a calibration tool for the estimation of loss ratios. For these three projects, the risk-modified benefit-cost ratios are computed to assess the effect of the risk on the economic performance of the project. The role of a warning system provided by systematic monitoring of the dam is analyzed: by reducing the risk costs, the warning system attenuates their effect on the benefit-cost ratio. The precursors, however, can be missed or misinterpreted: monitoring does not guarantee that the risks to human life can be reduced to zero. This study shows, in particular, that it is critical to consider the risk costs in the decision to build a new dam when the flood area is large and densely populated.
Holtgrave, David R; Wolitski, Richard J; Pals, Sherri L; Aidala, Angela; Kidder, Daniel P; Vos, David; Royal, Scott; Iruka, Nkemdiri; Briddell, Kate; Stall, Ron; Bendixen, Arturo Valdivia
2013-06-01
We present a cost-utility analysis based on data from the Housing and Health (H&H) Study of rental assistance for homeless and unstably housed persons living with HIV in Baltimore, Chicago and Los Angeles. As-treated analyses found favorable associations of housing with HIV viral load, emergency room use, and perceived stress (an outcome that can be quantitatively linked to quality of life). We combined these outcome data with information on intervention costs to estimate the cost-per-quality-adjusted-life-year (QALY) saved. We estimate that the cost-per-QALY-saved by the HIV-related housing services is $62,493. These services compare favorably (in terms of cost-effectiveness) to other well-accepted medical and public health services.
DOE Office of Scientific and Technical Information (OSTI.GOV)
The ECE application forecasts annual costs of preventive and corrective maintenance for budgeting purposes. Features within the application enable the user to change the specifications of the model to customize your forecast to best fit their needs and support “what if” analysis. Based on the user's selections, the ECE model forecasts annual maintenance costs. Preventive maintenance costs include the cost of labor to perform preventive maintenance activities at the specific frequency and labor rate. Corrective maintenance costs include the cost of labor and the cost of replacement parts. The application presents forecasted maintenance costs for the next five years inmore » two tables: costs by year and costs by site.« less
O'Dwyer, John L; Meads, David M; Hulme, Claire T; Mcparland, Lucy; Brown, Sarah; Coates, Laura C; Moverley, Anna R; Emery, Paul; Conaghan, Philip G; Helliwell, Philip S
2018-03-01
Treat-to-target approaches have proved to be effective in rheumatoid arthritis, but have not been studied in psoriatic arthritis (PsA). This study was undertaken to examine the cost-effectiveness of tight control (TC) of inflammation in early PsA compared to standard care. Cost-effectiveness analyses were undertaken alongside a UK-based, open-label, multicenter, randomized controlled trial. Taking the perspective of the health care sector, effectiveness was measured using the 3-level EuroQol 5-domain, which allows for the calculation of quality-adjusted life-years (QALYs). Incremental cost-effectiveness ratios (ICERs) are presented, which represent the additional cost per QALY gained over a 48-week time horizon. Sensitivity analyses are presented assessing the impact of variations in the analytical approach and assumptions on the cost-effectiveness estimates. The mean cost and QALYs were higher in the TC group: £4,198 versus £2,000 and 0.602 versus 0.561. These values yielded an ICER of £53,948 per QALY. Bootstrapped uncertainty analysis suggests that the TC has a 0.07 probability of being cost-effective at a £20,000 threshold. Stratified analysis suggests that with certain costs being controlled, an ICER of £24,639 can be calculated for patients with a higher degree of disease severity. A tight control strategy to treat PsA is an effective intervention in the treatment pathway; however, this study does not find tight control to be cost-effective in most analyses. Lower drug prices, targeting polyarthritis patients, or reducing the frequency of rheumatology visits may improve value for money metrics in future studies. © 2017, American College of Rheumatology.
Estrada, José M; Kraakman, N J R Bart; Lebrero, Raquel; Muñoz, Raúl
2012-01-01
The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies. Copyright © 2012 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Kowalski, Dariusz; Grzyl, Beata; Kristowski, Adam
2017-09-01
Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.
An Analysis of Rocket Propulsion Testing Costs
NASA Technical Reports Server (NTRS)
Ramirez, Carmen; Rahman, Shamim
2010-01-01
The primary mission at NASA Stennis Space Center (SSC) is rocket propulsion testing. Such testing is commonly characterized as one of two types: production testing for certification and acceptance of engine hardware, and developmental testing for prototype evaluation or research and development (R&D) purposes. For programmatic reasons there is a continuing need to assess and evaluate the test costs for the various types of test campaigns that involve liquid rocket propellant test articles. Presently, in fact, there is a critical need to provide guidance on what represents a best value for testing and provide some key economic insights for decision-makers within NASA and the test customers outside the Agency. Hence, selected rocket propulsion test databases and references have been evaluated and analyzed with the intent to discover correlations of technical information and test costs that could help produce more reliable and accurate cost projections in the future. The process of searching, collecting, and validating propulsion test cost information presented some unique obstacles which then led to a set of recommendations for improvement in order to facilitate future cost information gathering and analysis. In summary, this historical account and evaluation of rocket propulsion test cost information will enhance understanding of the various kinds of project cost information; identify certain trends of interest to the aerospace testing community.
Integrated cost-effectiveness analysis of agri-environmental measures for water quality.
Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah
2015-09-15
This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Bao, Han P.; Samareh, J. A.
2000-01-01
The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.
NASA Astrophysics Data System (ADS)
Juszczyk, Michał; Leśniak, Agnieszka; Zima, Krzysztof
2013-06-01
Conceptual cost estimation is important for construction projects. Either underestimation or overestimation of building raising cost may lead to failure of a project. In the paper authors present application of a multicriteria comparative analysis (MCA) in order to select factors influencing residential building raising cost. The aim of the analysis is to indicate key factors useful in conceptual cost estimation in the early design stage. Key factors are being investigated on basis of the elementary information about the function, form and structure of the building, and primary assumptions of technological and organizational solutions applied in construction process. The mentioned factors are considered as variables of the model which aim is to make possible conceptual cost estimation fast and with satisfying accuracy. The whole analysis included three steps: preliminary research, choice of a set of potential variables and reduction of this set to select the final set of variables. Multicriteria comparative analysis is applied in problem solution. Performed analysis allowed to select group of factors, defined well enough at the conceptual stage of the design process, to be used as a describing variables of the model.
Cost of diabetic eye, renal and foot complications: a methodological review.
Schirr-Bonnans, Solène; Costa, Nadège; Derumeaux-Burel, Hélène; Bos, Jérémy; Lepage, Benoît; Garnault, Valérie; Martini, Jacques; Hanaire, Hélène; Turnin, Marie-Christine; Molinier, Laurent
2017-04-01
Diabetic retinopathy (DR), diabetic kidney disease (DKD) and diabetic foot ulcer (DFU) represent a public health and economic concern that may be assessed with cost-of-illness (COI) studies. (1) To review COI studies published between 2000 and 2015, about DR, DKD and DFU; (2) to analyse methods used. Disease definition, epidemiological approach, perspective, type of costs, activity data sources, cost valuation, sensitivity analysis, cost discounting and presentation of costs may be described in COI studies. Each reviewed study was assessed with a methodological grid including these nine items. The five following items have been detailed in the reviewed studies: epidemiological approach (59 % of studies described it), perspective (75 %), type of costs (98 %), activity data sources (91 %) and cost valuation (59 %). The disease definition and the presentation of results were detailed in fewer studies (respectively 50 and 46 %). In contrast, sensitivity analysis was only performed in 14 % of studies and cost discounting in 7 %. Considering the studies showing an average cost per patient and per year with a societal perspective, DR cost estimates were US $2297 (range 5-67,486), DKD cost ranged from US $1095 to US $16,384, and DFU cost was US $10,604 (range 1444-85,718). This review reinforces the need to adequately describe the method to facilitate literature comparisons and projections. It also recalls that COI studies represent complementary tools to cost-effectiveness studies to help decision makers in the allocation of economic resources for the management of DR, DKD and DFU.
ERIC Educational Resources Information Center
Welch, Mary A., Ed.
1991-01-01
The analysis of public goods is presented with a discussion of the rules for fertilizer and pesticide storage units in Indiana. A basic rule summary is presented with descriptions of the types of dikes that might be considered for containment. Estimated costs are projected along with the number of contained liquid fertilizer spills by size in…
ERIC Educational Resources Information Center
Cohen, Anat; Nachmias, Rafi
2012-01-01
This paper describes implementation of a quantitative cost effectiveness analyzer for Web-supported academic instruction that was developed in our University. The paper presents the cost effectiveness analysis of one academic exemplary course in Life Science department and its introducing to the course lecturer for evaluation. The benefits and…
Review of "They Spend What? The Real Cost of Public Schools"
ERIC Educational Resources Information Center
Altemus, Vaughn
2010-01-01
The CATO Institute's Policy Analysis "They Spend WHAT? The Real Cost of Public Schools" contends that the figures most commonly associated with spending on K-12 public education do not include all relevant expenditures. It also cites survey evidence suggesting that voters underestimate the cost of education and, when presented with a higher…
A Cost-and-Benefit Study of Two Americorps Projects in the State of Washington.
ERIC Educational Resources Information Center
Wang, Changhua; And Others
AmeriCorps is a national initiative that involves citizens in strengthening America's communities through community service. This document presents findings of a cost-benefit analysis of two AmeriCorps programs in Washington State--the Hoquiam Project and the Lake Chelan Project. In calculating annual costs, the study included both federal dollars…
77 FR 31964 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-30
... year used for discounting the NPV of total consumer costs and savings, for the time-series of costs and... does not imply that the time-series of cost and benefits from which the annualized values were... each TSL, DOE has included tables that present a summary of the results of DOE's quantitative analysis...
An Analysis of the Cost and Cost-Effectiveness of Faculty Development for Online Teaching
ERIC Educational Resources Information Center
Meyer, Katrina A.
2014-01-01
This article presents the results of a national study of 39 higher education institutions that collected information about their cost measures used to evaluate faculty development for online teaching as well as decisions they would make to expand, keep, scale back, or eliminate various faculty development activities and contents in a…
DOT National Transportation Integrated Search
1979-10-01
This costs supplement is presented in the form of a series of tables and figures which summarize the data obtained as well as the results of analysis. Comments and explanatory notes relative to tables/figures are made where appropriate. Also included...
Determining the Costs of Community Residential Services for the Psychosocially Disabled.
ERIC Educational Resources Information Center
Piasecki, Joseph R.; And Others
Presented are survey data from nursing homes and halfway houses on the costs associated with the provision of community-based residential care for the psychosocially disabled, along with an examination of the differences in those costs as they relate to characteristics of disability groups or types of facilities, and an analysis of the…
A cost-effectiveness analysis of a residential radon remediation programme in the United Kingdom.
Kennedy, C A; Gray, A M; Denman, A R; Phillips, P S
1999-12-01
As residential radon programmes of identification and remediation have proceeded, so questions have been raised about their costs and benefits. This study presents a generalizable model for estimating the cost-effectiveness of a radon mitigation programme using the methodological framework now considered appropriate in the economic evaluation of health interventions. Its use will help to inform future discussion of radon remediation and lung cancer prevention programmes. Data from Northamptonshire were analysed, resulting in a societal cost-effectiveness ratio of Pounds Sterling 13250 per life-year gained in 1997. The percentage of houses found to be over the action level, and the percentage of householders who decide to remediate are shown to be important parameters for the cost-effectiveness analysis. Questions are raised about the particular importance of perspective in this type of analysis and suggestions are made for future research directions.
NASA Technical Reports Server (NTRS)
Goldman, H.; Wolf, M.
1978-01-01
Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that substantial cost reductions can be realized from technical advancements which fall into four categories: an increase in furnace productivity; the reduction of crucible cost through use of the crucible for the equivalent of multiple state-of-the-art crystals; the combined effect of several smaller technical improvements; and a carry over effect of the expected availability of semiconductor grade polysilicon at greatly reduced prices. A format for techno-economic analysis of solar cell production processes was developed, called the University of Pennsylvania Process Characterization (UPPC) format. The accumulated Cz process data are presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Edwin A. Harvego; James E. O'Brien; Michael G. McKellar
2012-11-01
Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysismore » was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.« less
An economic analysis of alternative paving materials
NASA Astrophysics Data System (ADS)
Mustain, J. L.
1982-12-01
The purpose of this paper is to present a means for economic analysis of alternative equivalent pavement designs, considering such factors as initial construction cost, annual maintenance cost, salvage value and the various intangibles which occur during the analysis period. Having established a means of economic comparison, it is then the intent of this paper to show that Portland Cement Concrete has been and is a viable pavement alternative and ought to receive due consideration in the military construction program.
III-Vs at Scale: A PV Manufacturing Cost Analysis of the Thin Film Vapor-Liquid-Solid Growth Mode
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zheng, Maxwell; Horowitz, Kelsey; Woodhouse, Michael
The authors present a manufacturing cost analysis for producing thin-film indium phosphide modules by combining a novel thin-film vapor-liquid-solid (TF-VLS) growth process with a standard monolithic module platform. The example cell structure is ITO/n-TiO2/p-InP/Mo. For a benchmark scenario of 12% efficient modules, the module cost is estimated to be $0.66/W(DC) and the module cost is calculated to be around $0.36/W(DC) at a long-term potential efficiency of 24%. The manufacturing cost for the TF-VLS growth portion is estimated to be ~$23/m2, a significant reduction compared with traditional metalorganic chemical vapor deposition. The analysis here suggests the TF-VLS growth mode could enablemore » lower-cost, high-efficiency III-V photovoltaics compared with manufacturing methods used today and open up possibilities for other optoelectronic applications as well.« less
NASA Technical Reports Server (NTRS)
1976-01-01
Ten advanced energy conversion systems for central-station, based-load electric power generation using coal and coal-derived fuels which were studied by NASA are presented. Various contractors were selected by competitive bidding to study these systems. A comparative evaluation is provided of the contractor results on both a system-by-system and an overall basis. Ground rules specified by NASA, such as coal specifications, fuel costs, labor costs, method of cost comparison, escalation and interest during construction, fixed charges, emission standards, and environmental conditions, are presented. Each system discussion includes the potential advantages of the system, the scope of each contractor's analysis, typical schematics of systems, comparison of cost of electricity and efficiency for each contractor, identification and reconciliation of differences, identification of future improvements, and discussion of outside comments. Considerations common to all systems, such as materials and furnaces, are also discussed. Results of selected in-house analyses are presented, in addition to contractor data. The results for all systems are then compared.
Wilcox, Meredith L; Mason, Helen; Fouad, Fouad M; Rastam, Samer; al Ali, Radwan; Page, Timothy F; Capewell, Simon; O'Flaherty, Martin; Maziak, Wasim
2015-01-01
This study presents a cost-effectiveness analysis of salt reduction policies to lower coronary heart disease in Syria. Costs and benefits of a health promotion campaign about salt reduction (HP); labeling of salt content on packaged foods (L); reformulation of salt content within packaged foods (R); and combinations of the three were estimated over a 10-year time frame. Policies were deemed cost-effective if their cost-effectiveness ratios were below the region's established threshold of $38,997 purchasing power parity (PPP). Sensitivity analysis was conducted to account for the uncertainty in the reduction of salt intake. HP, L, and R+HP+L were cost-saving using the best estimates. The remaining policies were cost-effective (CERs: R=$5,453 PPP/LYG; R+HP=$2,201 PPP/LYG; R+L=$2,125 PPP/LYG). R+HP+L provided the largest benefit with net savings using the best and maximum estimates, while R+L was cost-effective with the lowest marginal cost using the minimum estimates. This study demonstrated that all policies were cost-saving or cost effective, with the combination of reformulation plus labeling and a comprehensive policy involving all three approaches being the most promising salt reduction strategies to reduce CHD mortality in Syria.
Woolcott, J C; Khan, K M; Mitrovic, S; Anis, A H; Marra, C A
2012-05-01
We prospectively collected data on elderly fallers to estimate the total cost of a fall requiring an Emergency Department presentation. Using data collected on 102 falls, we found the average cost per fall causing an Emergency Department presentation of $11,408. When hospitalization was required, the average cost per fall was $29,363. For elderly persons, falls are a major source of mortality, morbidity, and disability. Previous Canadian cost estimates of seniors' falls were based upon administrative data that has been shown to underestimate the incidence of falls. Our objective was to use a labor-intensive, direct observation patient-tracking method to accurately estimate the total cost of falls among seniors who presented to a major urban Emergency Department (ED) in Canada. We prospectively collected data from seniors (>70 years) presenting to the Vancouver General Hospital ED after a fall. We excluded individuals who where cognitively impaired or unable to read/write English. Data were collected on the care provided including physician assessments/consultations, radiology and laboratory tests, ED/hospital time, rehabilitation facility time, and in-hospital procedures. Unit costs of health resources were taken from a fully allocated hospital cost model. Data were collected on 101 fall-related ED presentations. The most common diagnoses were fractures (n = 33) and lacerations (n = 11). The mean cost of a fall causing ED presentation was $11,408 (SD: $19,655). Thirty-eight fallers had injuries requiring hospital admission with an average total cost of $29,363 (SD: $22,661). Hip fractures cost $39,507 (SD: $17,932). Among the 62 individuals not admitted to the hospital, the average cost of their ED visit was $674 (SD: $429). Among the growing population of Canadian seniors, falls have substantial costs. With the cost of a fall-related hospitalization approaching $30,000, there is an increased need for fall prevention programs.
EBT reactor systems analysis and cost code: description and users guide (Version 1)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Santoro, R.T.; Uckan, N.A.; Barnes, J.M.
1984-06-01
An ELMO Bumpy Torus (EBT) reactor systems analysis and cost code that incorporates the most recent advances in EBT physics has been written. The code determines a set of reactors that fall within an allowed operating window determined from the coupling of ring and core plasma properties and the self-consistent treatment of the coupled ring-core stability and power balance requirements. The essential elements of the systems analysis and cost code are described, along with the calculational sequences leading to the specification of the reactor options and their associated costs. The input parameters, the constraints imposed upon them, and the operatingmore » range over which the code provides valid results are discussed. A sample problem and the interpretation of the results are also presented.« less
Terris-Prestholt, Fern; Vyas, Seema; Kumaranayake, Lilani; Mayaud, Philippe; Watts, Charlotte
2006-10-01
Calls for increased investment in sexually transmitted infection (STI) treatment across the developing world have been made to address the high disease burden and the association with HIV transmission. The goals of this study were to systematically review evidence on the cost of treating curable STIs and to explore its key determinants. A search of published literature was conducted in PubMed and supplemented by reviews of gray literature. Studies were analyzed by broad focus. Regression analysis explored how intervention characteristics affect unit costs, accounting for differences in costing methods. Fifty-three primary studies were identified, of which 62% used empirical data, 35% presented economic costs, and 22% presented full costs. The median STI treatment cost was US dollars 17.80. Clinics serving symptomatic patients were consistently cheaper than outreach services, services using syndromic management protocols had lower costs, and unit costs decreased with scale. The compiled cost data provide an evidence base that can be used to help inform resource planning.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This report presents the results of the further developments and testing of the Life Cycle Cost (LCC) Model previously developed by Engineering Systems Management, Inc. (ESM) on behalf of the U.S. Department of Energy (DOE) under contract No. DE-AC02-91CH10491. The Model incorporates specific analytical relationships and cost/performance data relevant to internal combustion engine (ICE) powered vehicles, battery powered electric vehicles (BPEVs), and fuel cell/battery-powered electric vehicles (FCEVs).
NASA Technical Reports Server (NTRS)
Miller, R. H.; Smith, D. B. S.
1979-01-01
Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.
Evaluation of a cost-effective loads approach. [shock spectra/impedance method for Viking Orbiter
NASA Technical Reports Server (NTRS)
Garba, J. A.; Wada, B. K.; Bamford, R.; Trubert, M. R.
1976-01-01
A shock spectra/impedance method for loads predictions is used to estimate member loads for the Viking Orbiter, a 7800-lb interplanetary spacecraft that has been designed using transient loads analysis techniques. The transient loads analysis approach leads to a lightweight structure but requires complex and costly analyses. To reduce complexity and cost, a shock spectra/impedance method is currently being used to design the Mariner Jupiter Saturn spacecraft. This method has the advantage of using low-cost in-house loads analysis techniques and typically results in more conservative structural loads. The method is evaluated by comparing the increase in Viking member loads to the loads obtained by the transient loads analysis approach. An estimate of the weight penalty incurred by using this method is presented. The paper also compares the calculated flight loads from the transient loads analyses and the shock spectra/impedance method to measured flight data.
Evaluation of a cost-effective loads approach. [for Viking Orbiter light weight structural design
NASA Technical Reports Server (NTRS)
Garba, J. A.; Wada, B. K.; Bamford, R.; Trubert, M. R.
1976-01-01
A shock spectra/impedance method for loads prediction is used to estimate member loads for the Viking Orbiter, a 7800-lb interplanetary spacecraft that has been designed using transient loads analysis techniques. The transient loads analysis approach leads to a lightweight structure but requires complex and costly analyses. To reduce complexity and cost a shock spectra/impedance method is currently being used to design the Mariner Jupiter Saturn spacecraft. This method has the advantage of using low-cost in-house loads analysis techniques and typically results in more conservative structural loads. The method is evaluated by comparing the increase in Viking member loads to the loads obtained by the transient loads analysis approach. An estimate of the weight penalty incurred by using this method is presented. The paper also compares the calculated flight loads from the transient loads analyses and the shock spectra/impedance method to measured flight data.
NASA Technical Reports Server (NTRS)
Berg, Melanie; LaBel, Ken
2007-01-01
This viewgraph presentation reviews the selection of the optimum Field Programmable Gate Arrays (FPGA) for space missions. Included in this review is a discussion on differentiating amongst various FPGAs, cost analysis of the various options, the investigation of radiation effects, an expansion of the evaluation criteria, and the application of the evaluation criteria to the selection process.
Turning up the heat on aircraft structures. [design and analysis for high-temperature conditions
NASA Technical Reports Server (NTRS)
Dobyns, Alan; Saff, Charles; Johns, Robert
1992-01-01
An overview is presented of the current effort in design and development of aircraft structures to achieve the lowest cost for best performance. Enhancements in this area are focused on integrated design, improved design analysis tools, low-cost fabrication techniques, and more sophisticated test methods. 3D CAD/CAM data are becoming the method through which design, manufacturing, and engineering communicate.
Cost estimation model for advanced planetary programs, fourth edition
NASA Technical Reports Server (NTRS)
Spadoni, D. J.
1983-01-01
The development of the planetary program cost model is discussed. The Model was updated to incorporate cost data from the most recent US planetary flight projects and extensively revised to more accurately capture the information in the historical cost data base. This data base is comprised of the historical cost data for 13 unmanned lunar and planetary flight programs. The revision was made with a two fold objective: to increase the flexibility of the model in its ability to deal with the broad scope of scenarios under consideration for future missions, and to maintain and possibly improve upon the confidence in the model's capabilities with an expected accuracy of 20%. The Model development included a labor/cost proxy analysis, selection of the functional forms of the estimating relationships, and test statistics. An analysis of the Model is discussed and two sample applications of the cost model are presented.
Nelson, Cameron J L; Bigley, Daniel P; Mallon, Timothy M
2015-03-01
This study of Department of Defense (DoD) civilian employees Workers' Compensation (WC) claims for chargeback year 2000 through 2012 aimed to analyze the frequency, rates, and costs of WC claims representing 5% of the DoD annual personnel budget. A multiyear cross-sectional study of WC claims data identified the top five most frequent causes, natures, and anatomical sites; changes in frequency, worker age, costs, and time were evaluated for trends. The annual frequency and rate of new DoD WC claims decreased over time, whereas costs per new claim have increased. New claim frequencies, rates, and costs aggregated in older age groups. The increasing trend in costs of each claim and the overall program costs presents a need for case management. Analysis of WC claims data is necessary to help target injury prevention efforts and reduce program costs.
Procedures and models for estimating preconstruction costs of highway projects.
DOT National Transportation Integrated Search
2012-07-01
This study presents data driven and component based PE cost prediction models by utilizing critical factors retrieved from ten years of historical project data obtained from ODOT roadway division. The study used factor analysis of covariance and corr...
Shafran, Stephen D
2015-01-01
Significant attention has been focused on the perceived increase in the cost of antiviral treatment for hepatitis C genotype 1 infection since the approval of the first direct-acting antiviral agents in 2011. Using Canadian list prices, the present analysis points out a paradox: while the cost per antiviral regimen is increasing, the cost per cure is decreasing, especially with interferon-free therapy. In a publicly funded health care system, the lowest cost per cure is a more valuable measure of value for public money than the cost per regimen.
Energy utilization: municipal waste incineration. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
LaBeck, M.F.
An assessment is made of the technical and economical feasibility of converting municipal waste into useful and useable energy. The concept presented involves retrofitting an existing municipal incinerator with the systems and equipment necessary to produce process steam and electric power. The concept is economically attractive since the cost of necessary waste heat recovery equipment is usually a comparatively small percentage of the cost of the original incinerator installation. Technical data obtained from presently operating incinerators designed specifically for generating energy, documents the technical feasibility and stipulates certain design constraints. The investigation includes a cost summary; description of process andmore » facilities; conceptual design; economic analysis; derivation of costs; itemized estimated costs; design and construction schedule; and some drawings.« less
Brown, G C; Brown, M M; Sharma, S; Busbee, B; Brown, H
2000-01-01
Laser photocoagulation has been shown in a large clinical trial to be efficacious in reducing the degree of vision loss occurring secondary to choroidal neovascularization (CNV) associated with ocular histoplasmosis. Nevertheless, data are lacking concerning the impact of the therapy on quality of life and its value to stakeholders in health care. Recently, information concerning the utility value of visual states has become available. Accordingly, the authors undertook to ascertain the cost-effectiveness of laser photocoagulation for the treatment of extrafoveal CNV occurring in eyes with ocular histoplasmosis. Design--A computer simulation, econometric model is presented to evaluate the incremental cost-effectiveness of laser photocoagulation therapy, as compared with the natural course of the disease, for the treatment of patients with extrafoveal CNV associated with ocular histoplasmosis. The model applies long-term visual data from previous clinical trials, utility analysis (which reflects patient perceptions of quality of life), decision analysis with Markov modeling, and present value analysis with discounting to account for the time value of money. Outcome measure--Cost per quality-adjusted life-year gained from treatment. Laser photocoagulation therapy for extrafoveal CNV associated with ocular histoplasmosis costs $4167 1999 US dollars (at a 3% discount rate) for each quality-adjusted life-year gained from treatment. Sensitivity analysis shows that changing the discount rate substantially alters the cost-effectiveness, with a value of $1339 at a 0% discount rate and $56,250 at a 10% discount rate. Compared with therapeutic modalities for other disease entities, laser therapy for the treatment of extrafoveal CNV associated with ocular histoplasmosis appears to be a cost-effective treatment from the patient preference-based point of view.
ERIC Educational Resources Information Center
Aughinbaugh, Lorine A.; And Others
Four products were developed during the second year of the Extended Opportunity Programs and Services (EOPS) cost effectiveness study for California community colleges. This project report presents: (1) a revised cost analysis form for state-level reporting of institutional program effectiveness data and per-student costs by EOPS program category…
Hansen, Kristian Schultz; Clarke, Siân E; Lal, Sham; Magnussen, Pascal; Mbonye, Anthony K
2017-01-01
Private sector drug shops are an important source of malaria treatment in Africa, yet diagnosis without parasitological testing is common among these providers. Accurate rapid diagnostic tests for malaria (mRDTs) require limited training and present an opportunity to increase access to correct diagnosis. The present study was a cost-effectiveness analysis of the introduction of mRDTs in Ugandan drug shops. Drug shop vendors were trained to perform and sell subsidised mRDTs and artemisinin-based combination therapies (ACTs) in the intervention arm while vendors offered ACTs following presumptive diagnosis of malaria in the control arm. The effect on the proportion of customers with fever 'appropriately treated of malaria with ACT' was captured during a randomised trial in drug shops in Mukono District, Uganda. Health sector costs included: training of drug shop vendors, community sensitisation, supervision and provision of mRDTs and ACTs to drug shops. Household costs of treatment-seeking were captured in a representative sample of drug shop customers. The introduction of mRDTs in drug shops was associated with a large improvement of diagnosis and treatment of malaria, resulting in low incremental costs for the health sector at US$0.55 per patient appropriately treated of malaria. High expenditure on non-ACT drugs by households contributed to higher incremental societal costs of US$3.83. Sensitivity analysis showed that mRDTs would become less cost-effective compared to presumptive diagnosis with increasing malaria prevalence and lower adherence to negative mRDT results. mRDTs in drug shops improved the targeting of ACTs to malaria patients and are likely to be considered cost-effective compared to presumptive diagnosis, although the increased costs borne by households when the test result is negative are a concern.
Hansen, Kristian Schultz; Clarke, Siân E.; Lal, Sham; Magnussen, Pascal; Mbonye, Anthony K.
2017-01-01
Background Private sector drug shops are an important source of malaria treatment in Africa, yet diagnosis without parasitological testing is common among these providers. Accurate rapid diagnostic tests for malaria (mRDTs) require limited training and present an opportunity to increase access to correct diagnosis. The present study was a cost-effectiveness analysis of the introduction of mRDTs in Ugandan drug shops. Methods Drug shop vendors were trained to perform and sell subsidised mRDTs and artemisinin-based combination therapies (ACTs) in the intervention arm while vendors offered ACTs following presumptive diagnosis of malaria in the control arm. The effect on the proportion of customers with fever ‘appropriately treated of malaria with ACT’ was captured during a randomised trial in drug shops in Mukono District, Uganda. Health sector costs included: training of drug shop vendors, community sensitisation, supervision and provision of mRDTs and ACTs to drug shops. Household costs of treatment-seeking were captured in a representative sample of drug shop customers. Findings The introduction of mRDTs in drug shops was associated with a large improvement of diagnosis and treatment of malaria, resulting in low incremental costs for the health sector at US$0.55 per patient appropriately treated of malaria. High expenditure on non-ACT drugs by households contributed to higher incremental societal costs of US$3.83. Sensitivity analysis showed that mRDTs would become less cost-effective compared to presumptive diagnosis with increasing malaria prevalence and lower adherence to negative mRDT results. Conclusion mRDTs in drug shops improved the targeting of ACTs to malaria patients and are likely to be considered cost-effective compared to presumptive diagnosis, although the increased costs borne by households when the test result is negative are a concern. PMID:29244829
Benefit-cost analysis of lane departure warning and roll stability control in commercial vehicles.
Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Guo, Feng; Camden, Matthew C; Hanowski, Richard J; Kwan, Quon
2017-09-01
This paper presents the cost benefits of two different onboard safety systems (OSS) installed on trucks as they operated during normal revenue deliveries. Using a formal economic analysis approach, the study quantified the costs and benefits associated with lane departure warning (LDW) systems and roll stability control (RSC) systems. The study used data collected from participating carriers (many of these crashes were not reported to state or Federal agencies), and the research team also reviewed each crash file to determine if the specific OSS would have mitigated or prevented the crash. The deployment of each OSS was anticipated to increase the safety of all road users, but impact different sectors of society in different ways. Benefits that were inherent in each group (e.g., industry, society) were considered, and different benefit-cost analyses (BCAs) were performed. This paper presents two BCAs: a BCA focused on the costs and benefits in the carrier industry by implementing each OSS, and a BCA that measured the societal benefits of each OSS. In addition, a BCA for a theoretical mandatory deployment option for each OSS is presented. BCA results for LDW and RSC clearly showed their benefits outweighed their costs for the carrier and society. Practical applications: Cost information is a crucial factor in purchasing decisions in carriers; similarly, regulators must consider the cost burden prior to mandating technologies. The results in this study provide carrier decision makers and regulators with information necessary to make an informed decision regarding RSC and LDW. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.
The costs and cost-effectiveness of an integrated sepsis treatment protocol.
Talmor, Daniel; Greenberg, Dan; Howell, Michael D; Lisbon, Alan; Novack, Victor; Shapiro, Nathan
2008-04-01
Sepsis is associated with high mortality and treatment costs. International guidelines recommend the implementation of integrated sepsis protocols; however, the true cost and cost-effectiveness of these are unknown. To assess the cost-effectiveness of an integrated sepsis protocol, as compared with conventional care. Prospective cohort study of consecutive patients presenting with septic shock and enrolled in the institution's integrated sepsis protocol. Clinical and economic outcomes were compared with a historical control cohort. Beth Israel Deaconess Medical Center. Overall, 79 patients presenting to the emergency department with septic shock in the treatment cohort and 51 patients in the control group. An integrated sepsis treatment protocol incorporating empirical antibiotics, early goal-directed therapy, intensive insulin therapy, lung-protective ventilation, and consideration for drotrecogin alfa and steroid therapy. In-hospital treatment costs were collected using the hospital's detailed accounting system. The cost-effectiveness analysis was performed from the perspective of the healthcare system using a lifetime horizon. The primary end point for the cost-effectiveness analysis was the incremental cost per quality-adjusted life year gained. Mortality in the treatment group was 20.3% vs. 29.4% in the control group (p = .23). Implementing an integrated sepsis protocol resulted in a mean increase in cost of approximately $8,800 per patient, largely driven by increased intensive care unit length of stay. Life expectancy and quality-adjusted life years were higher in the treatment group; 0.78 and 0.54, respectively. The protocol was associated with an incremental cost of $11,274 per life-year saved and a cost of $16,309 per quality-adjusted life year gained. In patients with septic shock, an integrated sepsis protocol, although not cost-saving, appears to be cost-effective and compares very favorably to other commonly delivered acute care interventions.
Spackman, Eldon; Sculpher, Mark; Howard, Jo; Malfroy, Moira; Llewelyn, Charlotte; Choo, Louise; Hodge, Renate; Johnson, Tony; Rees, David C; Fijnvandraat, Karin; Kirby-Allen, Melanie; Davies, Sally; Williamson, Lorna
2014-01-01
The study’s objective was to assess the cost-effectiveness of preoperative transfusion compared with no preoperative transfusion in patients with sickle cell disease undergoing low- or medium-risk surgery. Seventy patients with sickle cell disease (HbSS/Sß0thal genotypes) undergoing elective surgery participated in a multicentre randomised trial, Transfusion Alternatives Preoperatively in Sickle Cell Disease (TAPS). Here, a cost-effectiveness analysis based on evidence from that trial is presented. A decision-analytic model is used to incorporate long-term consequences of transfusions and acute chest syndrome. Costs and health benefits, expressed as quality-adjusted life years (QALYs), are reported from the ‘within-trial’ analysis and for the decision-analytic model. The probability of cost-effectiveness for each form of management is calculated taking into account the small sample size and other sources of uncertainty. In the range of scenarios considered in the analysis, preoperative transfusion was more effective, with the mean improvement in QALYs ranging from 0.018 to 0.206 per patient, and also less costly in all but one scenario, with the mean cost difference ranging from −£813 to £26. All scenarios suggested preoperative transfusion had a probability of cost-effectiveness >0.79 at a cost-effectiveness threshold of £20 000 per QALY. PMID:24329965
Cost-Benefit Analysis of an Otolaryngology Emergency Room Using a Contingent Valuation Approach.
Naunheim, Matthew R; Kozin, Elliot D; Sethi, Rosh K; Ota, H Gregory; Gray, Stacey T; Shrime, Mark G
2015-10-01
Dedicated otolaryngology emergency rooms (ERs) provide a unique mechanism of health care delivery. Relative costs and willingness to pay (WTP) for these services have not been studied. This study aims to provide a cost-benefit analysis of otolaryngology-specific ER care. Cost-benefit analysis based on contingent valuation surveys. An otolaryngology-specific ER in a tertiary care academic medical center. Adult English-speaking patients presenting to an otolaryngology ER were included. WTP questions were used to assess patient valuations of specialty emergency care. Sociodemographic data, income, and self-reported levels of distress were assessed. State-level and institution-specific historical cost data were merged with WTP data within a cost-benefit analysis framework. The response rate was 75.6%, and 199 patients were included in the final analysis. Average WTP for otolaryngology ER services was $319 greater than for a general ER (95% CI: $261 to $377), with a median value of $200. The historical mean cost per visit at a general ER was $575, and mean cost at the specialty ER was $551 (95% CI: $529 to $574). Subtracting incremental cost from incremental WTP yielded a net benefit of $343. Dedicated otolaryngology ER services are valued by patients for acute otolaryngologic problems and have a net benefit of $343 per patient visit. They appear to be a cost-beneficial method for addressing acute otolaryngologic conditions. This study has implications for ER-based otolaryngologic care and direct-to-specialist services. © American Academy of Otolaryngology-Head and Neck Surgery Foundation 2015.
Multi-modal management of acromegaly: a value perspective.
Kimmell, Kristopher T; Weil, Robert J; Marko, Nicholas F
2015-10-01
The Acromegaly Consensus Group recently released updated guidelines for medical management of acromegaly patients. We subjected these guidelines to a cost analysis. We conducted a cost analysis of the recommendations based on published efficacy rates as well as publicly available cost data. The results were compared to findings from a previously reported comparative effectiveness analysis of acromegaly treatments. Using decision tree software, two models were created based on the Acromegaly Consensus Group's recommendations and the comparative effectiveness analysis. The decision tree for the Consensus Group's recommendations was subjected to multi-way tornado analysis to identify variables that most impacted the value analysis of the decision tree. The value analysis confirmed the Consensus Group's recommendations of somatostatin analogs as first line therapy for medical management. Our model also demonstrated significant value in using dopamine agonist agents as upfront therapy as well. Sensitivity analysis identified the cost of somatostatin analogs and growth hormone receptor antagonists as having the most significant impact on the cost effectiveness of medical therapies. Our analysis confirmed the value of surgery as first-line therapy for patients with surgically accessible lesions. Surgery provides the greatest value for management of patients with acromegaly. However, in accordance with the Acromegaly Consensus Group's recent recommendations, somatostatin analogs provide the greatest value and should be used as first-line therapy for patients who cannot be managed surgically. At present, the substantial cost is the most significant negative factor in the value of medical therapies for acromegaly.
[Cost-effectiveness analysis in type 2 diabetes patients without hypertension].
Villarreal-Ríos, Enrique; Vargas-Daza, Emma Rosa; Galicia-Rodríguez, Liliana; Martínez-González, Lidia; Neri-Calero, Claudia; Hernández-Centeno, María Guadalupe
2010-01-01
To determine SOHDi program cost-effectiveness (S = overweight, O = obesity, H = hypertension, Di = diabetes) in type 2 diabetes patients (DM2) without hypertension. Sample included 32 patients. The effectiveness was measured by the blood glucose values. The SOHDi intervention cost included physician medical attention cost (PMAC), laboratory cost (LC), education group cost and individual evaluation cost. The cost of the traditional alternative medical attention (TAMA) contemplated PMAC and LC. The analysis cost-effectiveness included different intervals measurements, equal or smaller than 140 mg/dL blood glucose levels. The percentage of population with equal or smaller than 140 mg/dL blood glucose (effectiveness) in SOHDi was 23.3%, in TAMA was 44.8%. The average cost in SOHDi was $2202.22; in TAMA $1930.79. In the cases with blood glucose equal or smaller to 140 mg/dL the cost of effectiveness of 50% was $4726 in SOHDi and $2155 in TAMA. In this same situation the effectiveness by $1000 was 10.58% in SOHDi and 23.20% in TAMA. The SOHDi group is not the best alternative, at least not in the present operational conditions.
Combined EDL-Mobility Planning for Planetary Missions
NASA Technical Reports Server (NTRS)
Kuwata, Yoshiaki; Balaram, Bob
2011-01-01
This paper presents an analysis framework for planetary missions that have coupled mobility and EDL (Entry-Descent-Landing) systems. Traditional systems engineering approaches to mobility missions such as MERs (Mars Exploration Rovers) and MSL (Mars Science Laboratory) independently study the EDL system and the mobility system, and does not perform explicit trade-off between them or risk minimization of the overall system. A major challenge is that EDL operation is inherently uncertain and its analysis results such as landing footprint are described using PDF (Probability Density Function). The proposed approach first builds a mobility cost-to-go map that encodes the driving cost of any point on the map to a science target location. The cost could include variety of metrics such as traverse distance, time, wheel rotation on soft soil, and closeness to hazards. It then convolves the mobility cost-to-go map with the landing PDF given by the EDL system, which provides a histogram of driving cost, which can be used to evaluate the overall risk of the mission. By capturing the coupling between EDL and mobility explicitly, this analysis framework enables quantitative tradeoff between EDL and mobility system performance, as well as the characterization of risks in a statistical way. The simulation results are presented with a realistic Mars terrain data
Kawalec, Paweł; Malinowski, Krzysztof Piotr
2015-04-01
The aim of this systematic review was to collect all current data on indirect costs related to inflammatory bowel disease as well as assessing homogeneity and comparability, and conducting a meta-analysis. Costs were collected using databases from Medline, Embase and Centre for Reviews and Dissemination databases, then average annual cost per patient was calculated and expressed in 2013-rate USD using the consumer price index and purchasing power parity (scenario 1) and then adjusted to specific gross domestic product (scenario 2) to make them comparable. The studies were then included in quantitative synthesis using the meta-analysis and bootstrap methods. This systematic review was carried out and reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. From 18 publications, overall annual indirect costs per patient as a result of the quantitative synthesis among all studies eligible for meta-analysis ranged from US$2425.01-US$9622.15 depending on the scenario and model used for analysis. The cost of presenteeism was assessed in only two studies. Considering heterogeneity among all identified studies random-effect model presented the most accurate results of meta-analysis equal to US$7189.27 and US$9622.15 per patient per year for scenario 1 and scenario 2, respectively. This systematic review revealed the existence of a relatively small number of studies that reported on the great economic burden of the disease upon society. A great variety of methodologies and cost components resulted in a very large discrepancy in indirect costs and made meta-analysis difficult to perform, so two scenarios were considered and meta-analysis conducted in subgroups to make data more comparable.
Cost-effective analysis of conventional and nurse-led clinics for common otological procedures.
Uppal, S; Jose, J; Banks, P; Mackay, E; Coatesworth, A P
2004-03-01
The need to reduce costs while providing a first-class service has led to the expansion in the role of nurses in recent years. We present results of a comparison of the cost-effectiveness of conventional and nurse-led out-patient ear clinics. Our results indicate that cost-effective health care is a distinct competitive advantage for nurses taking up some roles conventionally performed by doctors. The difference in mean cost of out-patient visit per patient between the two groups is 75.28 pounds. This is equivalent to a reduction in cost to the hospital of more than 47,000 pounds for the 626 patients seen in a nurse-led ear clinic in a year. The nurse-led service is thus more cost-effective and presents an opportunity by freeing up otolaryngologists' time to see more complex patients and has the potential for reducing out-patient access time in the NHS.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-02-05
This decision document presents the selected removal action to address potential trichloroethene (TCE) impact to drinking water supply wells, located in the Installation Restoration Program (IRP) site ST009, otherwise known as the West Unit, at Galena Airport, Alaska. The information fron the RI Report is summarized, along with an analysis of potential removal action alternatives, in the Engineering Evaluation/Cost Analysis (EE/CA).
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-02-05
This decision document presents the selected removal action for the Million Gallon Hill source area of the Installation Restoration Program (IRP) site ST009, otherwise known as the West Unit at Galena Airport, Alaska. The information from the RI Report is summarized, along with an analysis of potential removal action alternatives in the Engineering Evaluation/Cost Analysis (EE/CA).
1993-09-11
it has traditionally been presented. The following cash flows also trigger "IRR incalculable-NPV diverging from zero" in the DCF program : Projecta r 0... program disapproval or cancellation is inherent in defense analyses, thus the emphasis on "affordability,’ e.g., lower cost. A final difficulty with using...percent. (With the DCF program , it makes no difference which one you use.) See Table 7 and Figure 2. Project Year 0 Year I Year 2 NPV @ 10% 1IRRs’ DCF
NASA Technical Reports Server (NTRS)
1971-01-01
Individualized program direct costs for each satellite program are presented. This breakdown provides the activity level dependent costs for each satellite program. The activity level dependent costs, or, more simply, program direct costs, are comprised of the total payload costs (as these costs are strictly program dependent) and the direct launch vehicle costs. Only those incremental launch vehicle costs associated directly with the satellite program are considered. For expendable launch vehicles the direct costs include the vehicle investment hardware costs and the launch operations costs. For the reusable STS vehicles the direct costs include only the launch operations, recovery operations, command and control, vehicle maintenance, and propellant support. The costs associated with amortization of reusable vehicle investment, RDT&E range support, etc., are not included.
Pinior, Beate; Firth, Clair L; Loitsch, Angelika; Stockreiter, Simon; Hutter, Sabine; Richter, Veronika; Lebl, Karin; Schwermer, Heinzpeter; Käsbohrer, Annemarie
2018-03-03
Bluetongue virus (BTV) is an emerging transboundary disease in Europe, which can cause significant production losses among ruminants. The analysis presented here assessed the costs of BTV surveillance and vaccination programmes in Austria and Switzerland between 2007 and 2016. Costs were compared with respect to time, type of programme, geographical area and who was responsible for payment. The total costs of the BTV vaccination and surveillance programmes in Austria amounted to €23.6 million, whereas total costs in Switzerland were €18.3 million. Our analysis demonstrates that the costs differed between years and geographical areas, both within and between the two countries. Average surveillance costs per animal amounted to approximately €3.20 in Austria compared with €1.30 in Switzerland, whereas the average vaccination costs per animal were €6.20 in Austria and €7.40 in Switzerland. The comparability of the surveillance costs is somewhat limited, however, due to differences in each nation's surveillance (and sampling) strategy. Given the importance of the export market for cattle production, investments in such programmes are more justified for Austria than for Switzerland. The aim of the retrospective assessment presented here is to assist veterinary authorities in planning and implementing cost-effective and efficient control strategies for emerging livestock diseases. © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Estimating the value of medical education: a net present value approach.
Kahn, Marc J; Nelling, Edward F
2010-07-01
Estimating the value of a medical education is a difficult undertaking. As student debt levels rise and the role of managed care in price-setting increases, the financial benefit of an MD degree comes into question. We developed a model using net present value (NPV) analysis for a range of annual costs of medical school attendance. Using this model, we determined the point at which pursuing a medical education is a "break-even" proposition from a financial perspective. The NPV of a medical education was positive for all annual costs of attendance from $10,000 to $100,000 and ranged from approximately $39,000 to $674,000 depending on the discount rate. Assuming a discount rate of 8%, only at an annual cost of attendance of $139,805 was the NPV = $0, which represents the break-even cost of medical education for a prospective student. Medical education is a financially advantageous undertaking for costs of attendance that far exceed even the most expensive schools in the United States. Our analysis suggests that based on economics, the supply of future physicians ought to be secure.
Pelletier-Fleury, N; Fargeon, V; Lanoé, J L; Fardeau, M
1997-10-01
Telemedecine has been talked about for more than 20 years, without it entering daily use with any success. Based on transaction costs economics, the present analysis of the exchange relationships between health care producers highlights certain characteristics of the current technical and legislative context, which leads to transaction costs. It also demonstrates that the introduction of telemedicine shifts the costs associated with agents' opportunism from patients to health-care producers themselves. All these costs may be considered nowadays to thwart the use of telemedicine. It is argued here that the Public Authorities and professionals of health care could act upon telemedicine in two fields: (1) intervention in the institutional environment aims notably at better defining the property rights of telemedicine, and so constitutes an unavoidable means of encouraging health-care producers to invest in new technology; and (2) implementation of organisational forms and mechanisms susceptible to regulating such telemedical relationships between health care producers-given the present institutional environment-constitutes an essential means for overcoming the immediate barriers blocking the diffusion of telemedicine.
San Francisco urban partnership agreement, national evaluation : cost benefit analysis test plan.
DOT National Transportation Integrated Search
2011-06-01
This report presents the test plan for collecting and analyzing cost and benefit data for the San Francisco Urban Partnership Agreement (UPA) under the United States Department of Transportation (U.S. DOT) UPA Program. The San Francisco UPA projects ...
Airport surface traffic control TAGS planning alternatives and cost/benefit
DOT National Transportation Integrated Search
1977-01-01
The findings of a cost/benefit analysis of the deployment of a new airport ground surveillance system TAGS (Tower Automated Ground Surveillance) are presented. TAGS will provide a plain view display of aircraft on the airports taxiways and runways li...
Simple cost analysis of a rural dental training facility in Australia.
Lalloo, Ratilal; Massey, Ward
2013-06-01
Student clinical placements away from the university dental school clinics are an integral component of dental training programs. In 2009, the School of Dentistry and Oral Health, Griffith University, commenced a clinical placement in a remote rural community in Australia. This paper presents a simple cost analysis of the project from mid-2008 to mid-2011. All expenditures of the project are audited by the Financial and Planning Services unit of the university. The budget was divided into capital and operational costs, and the latter were further subdivided into salary and non-salary costs, and these were further analysed for the various types of expenditures incurred. The value of the treatments provided and income generated is also presented. Remote rural placements have additional (to the usual university dental clinic) costs in terms of salary incentives, travel, accommodation and subsistence support. However, the benefits of the placement to both the students and the local community might outweigh the additional costs of the placement. Because of high costs of rural student clinical placements, the financial support of partners, including the local Shire Council, state/territory and Commonwealth governments, is crucial in the establishment and ongoing sustainability of rural dental student clinical placements. © 2013 The Authors. Australian Journal of Rural Health © National Rural Health Alliance Inc.
da Costa, Márcia Gisele Santos; Santos, Marisa da Silva; Sarti, Flávia Mori; Senna, Kátia Marie Simões e.; Tura, Bernardo Rangel; Goulart, Marcelo Correia
2014-01-01
Objectives The study performs a cost-effectiveness analysis of procedures for atrial septal defects occlusion, comparing conventional surgery to septal percutaneous implant. Methods A model of analytical decision was structured with symmetric branches to estimate cost-effectiveness ratio between the procedures. The decision tree model was based on evidences gathered through meta-analysis of literature, and validated by a panel of specialists. The lower number of surgical procedures performed for atrial septal defects occlusion at each branch was considered as the effectiveness outcome. Direct medical costs and probabilities for each event were inserted in the model using data available from Brazilian public sector database system and information extracted from the literature review, using micro-costing technique. Sensitivity analysis included price variations of percutaneous implant. Results The results obtained from the decision model demonstrated that the percutaneous implant was more cost effective in cost-effectiveness analysis at a cost of US$8,936.34 with a reduction in the probability of surgery occurrence in 93% of the cases. Probability of atrial septal communication occlusion and cost of the implant are the determinant factors of cost-effectiveness ratio. Conclusions The proposal of a decision model seeks to fill a void in the academic literature. The decision model proposed includes the outcomes that present major impact in relation to the overall costs of the procedure. The atrial septal defects occlusion using percutaneous implant reduces the physical and psychological distress to the patients in relation to the conventional surgery, which represent intangible costs in the context of economic evaluation. PMID:25302806
da Costa, Márcia Gisele Santos; Santos, Marisa da Silva; Sarti, Flávia Mori; Simões e Senna, Kátia Marie; Tura, Bernardo Rangel; Correia, Marcelo Goulart; Goulart, Marcelo Correia
2014-01-01
The study performs a cost-effectiveness analysis of procedures for atrial septal defects occlusion, comparing conventional surgery to septal percutaneous implant. A model of analytical decision was structured with symmetric branches to estimate cost-effectiveness ratio between the procedures. The decision tree model was based on evidences gathered through meta-analysis of literature, and validated by a panel of specialists. The lower number of surgical procedures performed for atrial septal defects occlusion at each branch was considered as the effectiveness outcome. Direct medical costs and probabilities for each event were inserted in the model using data available from Brazilian public sector database system and information extracted from the literature review, using micro-costing technique. Sensitivity analysis included price variations of percutaneous implant. The results obtained from the decision model demonstrated that the percutaneous implant was more cost effective in cost-effectiveness analysis at a cost of US$8,936.34 with a reduction in the probability of surgery occurrence in 93% of the cases. Probability of atrial septal communication occlusion and cost of the implant are the determinant factors of cost-effectiveness ratio. The proposal of a decision model seeks to fill a void in the academic literature. The decision model proposed includes the outcomes that present major impact in relation to the overall costs of the procedure. The atrial septal defects occlusion using percutaneous implant reduces the physical and psychological distress to the patients in relation to the conventional surgery, which represent intangible costs in the context of economic evaluation.
Corporate cost of occupational accidents: an activity-based analysis.
Rikhardsson, Pall M; Impgaard, Martin
2004-03-01
The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents for a company with 3.600 employees was estimated to approximately US$ 682.000. The paper includes an introduction regarding accident cost analysis in companies, a presentation of the SACA project methodology and the SACA method itself, a short overview of some of the results of the SACA project and a conclusion. Further information about the project is available at http://www.asb.dk/saca.
Vandenberg Air Force Base integrated resource assessment. Volume 3, Resource assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Daellenbach, K.K.; Dagle, J.E.; Dittmer, A.L.
1993-06-01
The US Air Force Space Command (SPACECOM) has tasked the Pacific Northwest Laboratory (PNL), as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the SPACECOM VAFB facility located approximately 50 miles northwest of Santa Barbara, California. Itmore » is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analysis of EROs are presented in ten common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). In addition, a case study of process loads at Space Launch Complex-4 (SLC-4) is included. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O and M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and value index (VI) of each ERO. Finally, an appendix includes a summary of an economic analysis case study of the South Vandenberg Power Plant (SVPP) operating scenarios.« less
Integrated operations payloads/fleet analysis study extension report
NASA Technical Reports Server (NTRS)
1971-01-01
An analysis of the factors affecting the cost effectiveness of space shuttle operations is presented. The subjects discussed are: (1)payload data bank, (2) program risk analysis, (3)navigation satellite program, and (4) reusable launch systems.
Energy and life-cycle cost analysis of a six-story office building
NASA Astrophysics Data System (ADS)
Turiel, I.
1981-10-01
An energy analysis computer program, DOE-2, was used to compute annual energy use for a typical office building as originally designed and with several energy conserving design modifications. The largest energy use reductions were obtained with the incorporation of daylighting techniques, the use of double pane windows, night temperature setback, and the reduction of artificial lighting levels. A life-cycle cost model was developed to assess the cost-effectiveness of the design modifications discussed. The model incorporates such features as inclusion of taxes, depreciation, and financing of conservation investments. The energy conserving strategies are ranked according to economic criteria such as net present benefit, discounted payback period, and benefit to cost ratio.
You, J H S; Wong, W C W; Ip, M; Lee, N L S; Ho, S C
2009-11-01
To compare cost and quality-adjusted life-years (QALYs) gained by influenza vaccination with or without pneumococcal vaccination in the elderly living in long-term care facilities (LTCFs). Cost-effectiveness analysis based on Markov modelling over 5 years, from a Hong Kong public health provider's perspective, on a hypothetical cohort of LTCF residents aged > or = 65 years. Benefit-cost ratio (BCR) and net present value (NPV) of two vaccination strategies versus no vaccination were estimated. The cost and QALYs gained by two vaccination strategies were compared by Student's t-test in probabilistic sensitivity analysis (10,000 Monte Carlo simulations). Both vaccination strategies had high BCRs and NPVs (6.39 and US$334 for influenza vaccination; 5.10 and US$332 for influenza plus pneumococcal vaccination). In base case analysis, the two vaccination strategies were expected to cost less and gain higher QALYs than no vaccination. In probabilistic sensitivity analysis, the cost of combined vaccination and influenza vaccination was significantly lower (p<0.001) than the cost of no vaccination. Both vaccination strategies gained significantly higher (p<0.001) QALYs than no vaccination. The QALYs gained by combined vaccination were significantly higher (p = 0.030) than those gained by influenza vaccination alone. The total cost of combined vaccination was significantly lower (p = 0.011) than that of influenza vaccination. Influenza vaccination with or without pneumococcal vaccination appears to be less costly with higher QALYs gained than no vaccination, over a 5-year period, for elderly people living in LTCFs from the perspective of a Hong Kong public health organisation. Combined vaccination was more likely to gain higher QALYs with lower total cost than influenza vaccination alone.
[Economic analysis versus the principle of guaranteed safety in blood transfusion].
Moatti, J P; Loubière, S; Rotily, M
2000-06-01
This article shows that policies aimed at reducing risks of infectious agents transmissible through blood unfortunately follow a law of 'diminishing returns': increasing marginal costs have to be devoted for limited reductions in the risks of contamination through blood donations. Therefore, the economic cost-effectiveness analysis is appropriate to identify screening strategies which may minimize costs to reach a certain level of safety. Moreover, economic analysis can contribute to public debates about the level of residual risk that society is willing to accept. Empirical results from French studies about screening for hepatitis C virus (HCV) in individuals who have received blood transfusions and in blood donations are presented to illustrate these points.
[Determination of cost-effective strategies in colorectal cancer screening].
Dervaux, B; Eeckhoudt, L; Lebrun, T; Sailly, J C
1992-01-01
The object of the article is to implement particular methodologies in order to determine which strategies are cost-effective in the mass screening of colorectal cancer after a positive Hemoccult test. The first approach to be presented consists in proposing a method which enables all the admissible diagnostic strategies to be determined. The second approach enables a minimal cost function to be estimated using an adaptation of "Data Envelopment Analysis". This method proves to be particularly successful in cost-efficiency analysis, when the performance indicators are numerous and hard to aggregate. The results show that there are two cost-effective strategies after a positive Hemoccult test: coloscopy and sigmoidoscopy; they put into question the relevance of double contrast barium enema in the diagnosis of colo-rectal lesions.
ERIC Educational Resources Information Center
Klapp, Alli; Belfield, Clive; Bowden, Brooks; Levin, Henry; Shand, Robert; Zander, Sabine
2017-01-01
There is growing evidence that social and emotional skills can be taught to students in school and teaching these skills can have a positive effect on later outcomes, such as better mental health and less drug use. This paper presents a benefit-cost analysis of a longitudinal social and emotional learning intervention in Sweden, using data for 663…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Horowitz, Kelsey A; Bench Reese, Samantha R; Remo, Timothy W
This brochure, published as an annual research highlight of the Clean Energy Manufacturing Analysis Center (CEMAC), summarizes CEMAC analysis of silicon carbide (SiC) power electronics for variable frequency motor drives. The key finding presented is that variations in manufacturing expertise, yields, and access to existing facilities impact regional costs and manufacturing location decisions for SiC ingots, wafers, chips, and power modules more than do core country-specific factors such as labor and electricity costs.
Kaelber, David C; Miller, Vince; Fisher, Nancy; Schlesinger, Jim; Norris, Greg
2007-10-11
Electronic medical records (EMRs) are gaining increasing prominence in healthcare, however still have low market penetration. EMR implementation cost is a primary perceived barrier. Here we present a payback analysis on an outpatient EMR implementation, showing capital expense recovery (net of operating costs) at 6 years and now generating $6 million yearly in direct savings for our healthcare system.
The 747 primary flight control systems reliability and maintenance study
NASA Technical Reports Server (NTRS)
1979-01-01
The major operational characteristics of the 747 Primary Flight Control Systems (PFCS) are described. Results of reliability analysis for separate control functions are presented. The analysis makes use of a NASA computer program which calculates reliability of redundant systems. Costs for maintaining the 747 PFCS in airline service are assessed. The reliabilities and cost will provide a baseline for use in trade studies of future flight control system design.
Internal Logistics System Selection with Total Cost of Ownership Analysis
NASA Astrophysics Data System (ADS)
Araújo, Inês; Pimentel, Carina; Godina, Radu; Matias, João C. O.
2017-06-01
In this paper a methodology was followed in order to support the decision-making of one industrial unit regarding its internal logistics system. The addressed factory was facing issues with their internal logistics approach. Some alternatives were pointed out and a proper total cost of ownership (TCO) analysis was developed. This analysis was taken in order to demonstrate the more cost-effective solution for the internal logistics system. This tool is more and more valued by the companies, due to their willing to reduce the costs that are associated with the way of doing business. Despite the proposal of the best choice for the internal logistics system of the enterprise, this study also intends to present some conclusions about the match between the nature of the industrial unit and the logistics systems that best fit the requirements of those.
Wong, Kenny K; Chan, Sherry K W; Lam, May M L; Hui, Christy L M; Hung, Se F; Tay, Margaret; Lee, K H; Chen, Eric Y H
2011-08-01
The Early Assessment Service for Young People with Early Psychosis (EASY) was developed in Hong Kong in 2001 to provide a comprehensive and integrated approach for early detection and intervention for young people suffering from first episode psychosis. The present study examined the cost-effectiveness of the service over a period of 24 months compared to standard care. This is a historical control study. Sixty-five patients who presented to the EASY service in 2001 with first episode psychosis were individually matched (on age, sex and diagnosis) with 65 patients who received standard psychiatric care in a precursor service (pre-EASY) between 1999 and 2000. A retrospective cost-effectiveness analysis was conducted over a period of 24 months. The overall average cost of service utilization per patient and the effects on hospitalization rate were compared using bootstrapping analysis. Cost per point improvement in Positive and Negative Syndrome Scale (PANSS) was also computed with sensitivity analysis. Only direct costs were analysed in the current study. There was no significant difference in service utilization between the EASY and pre-EASY standard care groups. The cost-effectiveness acceptability curve, which was used to explore uncertainty in estimates of cost and effects, suggested that there was a probability of at least 94% that the EASY model was more cost-effective than the pre-EASY service in reducing psychiatric inpatient admissions. EASY patients also showed superior results in average cost per unit improvement in PANSS. EASY is likely to be more cost-effective in improving outcomes, particularly in reducing hospitalization and improving clinical symptoms among young people with first episode psychosis. This study provides a perspective from the east Asian region, and supports further development of similar services, particularly in the local setting. However, further studies with a longer follow up period and larger sample size are required to verify these findings.
Memon, Aftab Hameed; Rahman, Ismail Abdul
2014-01-01
This study uncovered inhibiting factors to cost performance in large construction projects of Malaysia. Questionnaire survey was conducted among clients and consultants involved in large construction projects. In the questionnaire, a total of 35 inhibiting factors grouped in 7 categories were presented to the respondents for rating significant level of each factor. A total of 300 questionnaire forms were distributed. Only 144 completed sets were received and analysed using advanced multivariate statistical software of Structural Equation Modelling (SmartPLS v2). The analysis involved three iteration processes where several of the factors were deleted in order to make the model acceptable. The result of the analysis found that R 2 value of the model is 0.422 which indicates that the developed model has a substantial impact on cost performance. Based on the final form of the model, contractor's site management category is the most prominent in exhibiting effect on cost performance of large construction projects. This finding is validated using advanced techniques of power analysis. This vigorous multivariate analysis has explicitly found the significant category which consists of several causative factors to poor cost performance in large construction projects. This will benefit all parties involved in construction projects for controlling cost overrun. PMID:24693227
Memon, Aftab Hameed; Rahman, Ismail Abdul
2014-01-01
This study uncovered inhibiting factors to cost performance in large construction projects of Malaysia. Questionnaire survey was conducted among clients and consultants involved in large construction projects. In the questionnaire, a total of 35 inhibiting factors grouped in 7 categories were presented to the respondents for rating significant level of each factor. A total of 300 questionnaire forms were distributed. Only 144 completed sets were received and analysed using advanced multivariate statistical software of Structural Equation Modelling (SmartPLS v2). The analysis involved three iteration processes where several of the factors were deleted in order to make the model acceptable. The result of the analysis found that R(2) value of the model is 0.422 which indicates that the developed model has a substantial impact on cost performance. Based on the final form of the model, contractor's site management category is the most prominent in exhibiting effect on cost performance of large construction projects. This finding is validated using advanced techniques of power analysis. This vigorous multivariate analysis has explicitly found the significant category which consists of several causative factors to poor cost performance in large construction projects. This will benefit all parties involved in construction projects for controlling cost overrun.
A cost benefit analysis of an enhanced seat belt enforcement program in South Africa.
Harris, G T; Olukoga, I A
2005-04-01
To examine whether a program to increase the wearing of seat belts in a South African urban area would be worthwhile in societal terms. A cost benefit analysis of a one year enhanced seat belt enforcement program in eThekwini (Durban) Municipality. Data were drawn from two main sources--a 1998 study of the cost of road crashes in South Africa and, given the absence of other data, a meta-analysis of the effectiveness of various types of interventions to reduce road crash casualties in the United States--and were analyzed using cost benefit analysis. A program designed to enforce greater wearing of seat belts, estimated to cost 2 million rand in one year, could be reasonably expected to increase seat belt usage rates by 16 percentage points and reduce fatalities and injuries by 9.5%. This would result in saved social costs of 13.6 million rand in the following year or a net present value of 11.6 million rand. There would also be favorable consequences for municipal finances. Investment in a program to increase seat belt wearing rates is highly profitable in societal terms.
You, Joyce H S; Sahota, Daljit Singh; Yuen, Pong Mo
2009-02-01
To compare the cost and quality-adjusted life-years (QALYs) of hysterectomy, myomectomy, and uterine artery embolization (UAE) for symptomatic control of uterine fibroids. A cost-utility analysis conducted by using Markov modeling. The analysis was conducted from the perspective of Hong Kong society. A hypothetical cohort of patients presenting with symptomatic uterine fibroids. Hysterectomy, myomectomy, or UAE. Health-care resource use and QALYs over 5 years. The base-case analysis showed that hysterectomy was the most effective treatment (4.368 QALYs), followed by myomectomy (4.273 QALYs) and UAE (4.245 QALYs) over 5 years. Hysterectomy was less costly (USD8418) (1USD = 7.8HKD) than UAE (USD8847) and myomectomy (USD9036). Monte Carlo 10,000 simulations showed that the hysterectomy group was less costly than the UAE and myomectomy groups 84.1% and 79.1% of the time, and it also gained higher number of QALYs than the UAE and myomectomy groups over 97% of the time. Hysterectomy appears to be more cost-effective than myomectomy and UAE for management of symptomatic uterine fibroids over a 5-year period among patients who do not have a preference for uterus-conserving interventions.
[Effects, safety and cost-benefit analysis of Down syndrome screening in first trimester].
Shengmou, Lin; Min, Chen; Chenhong, Wang; Shengli, Li; Jiansheng, Xie; Hui, Yuan; Dinghao, Lin; Xiaoxia, Wu; Wei, Wang; Hongyun, Zhang; Haiyan, Tang
2014-05-01
To investigate the effects, safety and cost-benefit analysis of Down syndrome screening in first trimester. From January 2009 to December 2012, 43 729 pregnant women undergoing 3 methods of Down syndrome traditional screening strategies in Shenzhen Maternity and Child Healthcare Hospital were studied retrospectively, including in 17 502 cases in pregnancy associated plasma protein A (PAPP-A) and free β-hCG measured biochemistry screening, 14 080 cases in nuchal translucency (NT) screening and 12 147 cases in combined screening, meanwhile, 7 389 cases on non-invasive fetal trisomy test (NIFTY) were performed in Huada Gene Research Institute(BGI). The effects and safety of four screening strategies were assessed throughout a decision tree. The economical characters of each screening strategy were compared by cost-effectiveness analysis as well as cost-benefit analysis. (1) The effects of four strategies are: NIFTY > combined screening > NT screening > biochemistry screening. (2) The safety of four strategies are: NIFTY > combined screening > NT screening > biochemistry screening. (3) Cost-effectiveness analysis and cost-benefit analysis:the biochemistry screening has lowest cost-effectiveness ratio (CER) and highest cost-benefit ratio (CBR), which performed a better economical efficiency. The incremental CER of three traditional screening strategies are all less than the economical burden of Down syndrome.NIFTY has highest CER and negative net present value (NPV), NPV would be positive and CBR would be more than 1 if the price of NIFTY reduce to 1 434 Yuan. Combined screening possess best screening efficiency, while biochemistry screening was demonstrated more economical in traditional screening.NIFTY is the future of Down syndrome screening.
Castañeda-Orjuela, Carlos; Romero, Martin; Arce, Patricia; Resch, Stephen; Janusz, Cara B; Toscano, Cristiana M; De la Hoz-Restrepo, Fernando
2013-07-02
The cost of Expanded Programs on Immunization (EPI) is an important aspect of the economic and financial analysis needed for planning purposes. Costs also are needed for cost-effectiveness analysis of introducing new vaccines. We describe a costing tool that improves the speed, accuracy, and availability of EPI costs and that was piloted in Colombia. The ProVac CostVac Tool is a spreadsheet-based tool that estimates overall EPI costs considering program inputs (personnel, cold chain, vaccines, supplies, etc.) at three administrative levels (central, departmental, and municipal) and one service delivery level (health facilities). It uses various costing methods. The tool was evaluated through a pilot exercise in Colombia. In addition to the costs obtained from the central and intermediate administrative levels, a survey of 112 local health facilities was conducted to collect vaccination costs. Total cost of the EPI, cost per dose of vaccine delivered, and cost per fully vaccinated child with the recommended immunization schedule in Colombia in 2009 were estimated. The ProVac CostVac Tool is a novel, user-friendly tool, which allows users to conduct an EPI costing study following guidelines for cost studies. The total costs of the Colombian EPI were estimated at US$ 107.8 million in 2009. The cost for a fully immunized child with the recommended schedule was estimated at US$ 153.62. Vaccines and vaccination supplies accounted for 58% of total costs, personnel for 21%, cold chain for 18%, and transportation for 2%. Most EPI costs are incurred at the central level (62%). The major cost driver at the department and municipal levels is personnel costs. The ProVac CostVac Tool proved to be a comprehensive and useful tool that will allow researchers and health officials to estimate the actual cost for national immunization programs. The present analysis shows that personnel, cold chain, and transportation are important components of EPI and should be carefully estimated in the cost analysis, particularly when evaluating new vaccine introduction. Copyright © 2013 Elsevier Ltd. All rights reserved.
Transit bus life cycle cost and year 2007 emissions estimation.
DOT National Transportation Integrated Search
2007-06-01
The report presents a study of transit bus life cycle cost (LCC) analysis, and projected transit bus emissions and fuel economy for 2007 : model year buses. It covers four bus types: diesel buses using ultra low sulfur diesel (ULSD), diesel buses usi...
Integrated orbital servicing and payloads study. Volume 2: Technical and cost analysis
NASA Technical Reports Server (NTRS)
1975-01-01
The details and background used in the investigation of orbital servicing and payloads are presented. Topics discussed include review of previous models, application of servicing to communications satellites, assessment of spacecraft servicing, cost of servicing, and launch vehicle effects on spacecraft.
Clustered-dot halftoning with direct binary search.
Goyal, Puneet; Gupta, Madhur; Staelin, Carl; Fischer, Mani; Shacham, Omri; Allebach, Jan P
2013-02-01
In this paper, we present a new algorithm for aperiodic clustered-dot halftoning based on direct binary search (DBS). The DBS optimization framework has been modified for designing clustered-dot texture, by using filters with different sizes in the initialization and update steps of the algorithm. Following an intuitive explanation of how the clustered-dot texture results from this modified framework, we derive a closed-form cost metric which, when minimized, equivalently generates stochastic clustered-dot texture. An analysis of the cost metric and its influence on the texture quality is presented, which is followed by a modification to the cost metric to reduce computational cost and to make it more suitable for screen design.
Economics of internal and external energy storage in solar power plant operation
NASA Technical Reports Server (NTRS)
Manvi, R.; Fujita, T.
1977-01-01
A simple approach is formulated to investigate the effect of energy storage on the bus-bar electrical energy cost of solar thermal power plants. Economic analysis based on this approach does not require detailed definition of a specific storage system. A wide spectrum of storage system candidates ranging from hot water to superconducting magnets can be studied based on total investment and a rough knowledge of energy in and out efficiencies. Preliminary analysis indicates that internal energy storage (thermal) schemes offer better opportunities for energy cost reduction than external energy storage (nonthermal) schemes for solar applications. Based on data and assumptions used in JPL evaluation studies, differential energy costs due to storage are presented for a 100 MWe solar power plant by varying the energy capacity. The simple approach presented in this paper provides useful insight regarding the operation of energy storage in solar power plant applications, while also indicating a range of design parameters where storage can be cost effective.
Technoeconomic analysis of wheat straw densification in the Canadian Prairie Province of Manitoba.
Mupondwa, Edmund; Li, Xue; Tabil, Lope; Phani, Adapa; Sokhansanj, Shahab; Stumborg, Mark; Gruber, Margie; Laberge, Serge
2012-04-01
This study presents a technoeconomic analysis of wheat straw densification in Canada's prairie province of Manitoba as an integral part of biomass-to-cellulosic-ethanol infrastructure. Costs of wheat straw bale and pellet transportation and densification are analysed, including densification plant profitability. Wheat straw collection radius increases nonlinearly with pellet plant capacity, from 9.2 to 37km for a 2-35tonnesh(-1) plant. Bales are cheaper under 250km, beyond which the cheapest feedstocks are pellets from the largest pellet plant that can be built to exploit economies of scale. Feedstocks account for the largest percentage of variable costs. Marginal and average cost curves suggest Manitoba could support a pellet plant up to 35tonnesh(-1). Operating below capacity (75-50%) significantly erodes a plant's net present value (NPV). Smaller plants require higher NPV break-even prices. Very large plants have considerable risk under low pellet prices and increased processing costs. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.
Cost segregation of assets offers tax benefits.
Grant, D A
2001-04-01
A cost-segregation study is an asset-reclassification strategy that accelerates tax-depreciation deductions. By using this strategy, healthcare facility owners can lower their current income-tax liability and increase current cash flow. Simply put, certain real estate is reclassified from long-lived real property to shorter-lived personal property for depreciation purposes. Depreciation deductions for the personal property then can be greatly accelerated, thereby producing greater present-value tax savings. An analysis of costs can be conducted from either detailed construction records, when such records are available, or by using qualified appraisers, architects, or engineers to perform the allocation analysis.
SEATSAT programs option analysis
NASA Technical Reports Server (NTRS)
Luckl, L.
1976-01-01
A preliminary analysis of the costs of SEASAT follow-on options is presented. All the options assume the existence of SEASAT-A as currently defined in the SEASAT Economic Assessment. It is assumed that each option will continue through the year 2000 and approach operational system status in the 1983-1986 period, depending upon the sensor package selected. The launch vehicle assumed through 1983 is the Atlas Agena. After 1983, it is assumed SEASAT-A will switch to the use of the Space Shuttle. All cost estimates are 1976 dollars for fiscal year cost accounting, with no inflation rate included.
Policy analysis for prenatal genetic diagnosis.
Thompson, M; Milunsky, A
1979-01-01
Consideration of the analytic difficulties faced in estimating the benefits and costs of prenatal genetic diagnosis, coupled with a brief review of existing benefit-cost studies, leads to the conclusion that public subsidy of prenatal testing can yield benefits substantially in excess of costs. The practical obstacles to such programs include the attitudes of prospective parents, a lack of knowledge, monetary barriers, inadequately organized medical resources, and the political issue of abortion. Policy analysis can now nevertheless formulate principles and guide immediate actions to improve present utilization of prenatal testing and to facilitate possible future expansion of these diagnostic techniques.
Spacecraft platform cost estimating relationships
NASA Technical Reports Server (NTRS)
Gruhl, W. M.
1972-01-01
The three main cost areas of unmanned satellite development are discussed. The areas are identified as: (1) the spacecraft platform (SCP), (2) the payload or experiments, and (3) the postlaunch ground equipment and operations. The SCP normally accounts for over half of the total project cost and accurate estimates of SCP costs are required early in project planning as a basis for determining total project budget requirements. The development of single formula SCP cost estimating relationships (CER) from readily available data by statistical linear regression analysis is described. The advantages of single formula CER are presented.
The Costs and Risks of Medical Care
McPhee, Stephen J.; Myers, Lois P.; Schroeder, Steven A.
1982-01-01
Understanding the costs and risks of medical care, as well as the benefits, is essential to good medical practice. The literature on this topic transcends disciplines, making it a challenge for clinicians and medical educators to compile information on costs and risks for use in patient care. This annotated bibliography presents summaries of pertinent references on (1) financial costs of care, (2) excessive use of medical services, (3) clinical risks of care, (4) decision analysis, (5) cost-benefit analyses, (6) factors affecting physician use of services and (7) strategies to improve physician ordering patterns. PMID:6814071
Simultaneous versus sequential bilateral cochlear implants in adults: Cost analysis in a US setting.
Trinidade, Aaron; Page, Joshua C; Kennett, Sarah W; Cox, Matthew D; Dornhoffer, John L
2017-11-01
From a purely surgical efficiency point of view, simultaneous cochlear implantation (SimCI) is more cost-effective than sequential cochlear implantation (SeqCI) when total direct costs are considered (implant and hospital costs). However, in a setting where only SeqCI is practiced and a proportion of initially unilaterally implanted patients do not progress to a second implant, this may not be the case, especially when audiological costs are factored in. We present a cost analysis of such a scenario as would occur in our institution. Retrospective review and cost analysis. Between 2005 and 2015, 370 patients fulfilled the audiological criteria for bilateral implantation. Of those, 267 (72.1%) underwent unilateral cochlear implantation only, 101 (27.3%) progressed to SeqCI, and two underwent SimCI. The total hospital, surgical, and implant costs, and initial implant stimulation series audiological costs between August 2015 and August 2016 (29 adult patients) were used in this analysis. The total hospital, surgical, and implant costs for this period was $2,731,360.42. Based on previous local trends, if a projected eight (27.3%) of these patients decide to progress to SeqCI, this will cost an additional $750,811.04, resulting in an overall total of $3,482,171.46 for these 29 patients. Had all 29 undergone SimCI, the total projected cost would have been $3,332,991.75, representing a total potential saving of $149,179.67 (4.3%). In institutions where only SeqCI is allowed in adults, overall patient management may cost marginally more than if SimCI were practiced. This will be of interest to CI programs and health insurance companies. 4. Laryngoscope, 127:2615-2618, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.
NASA Astrophysics Data System (ADS)
Wahyuda; Santosa, Budi; Rusdiansyah, Ahmad
2018-04-01
Deregulation of the electricity market requires coordination between parties to synchronize the optimization on the production side (power station) and the transport side (transmission). Electricity supply chain presented in this article is designed to facilitate the coordination between the parties. Generally, the production side is optimized with price based dynamic economic dispatch (PBDED) model, while the transmission side is optimized with Multi-echelon distribution model. Both sides optimization are done separately. This article proposes a joint model of PBDED and multi-echelon distribution for the combined optimization of production and transmission. This combined optimization is important because changes in electricity demand on the customer side will cause changes to the production side that automatically also alter the transmission path. The transmission will cause two cost components. First, the cost of losses. Second, the cost of using the transmission network (wheeling transaction). Costs due to losses are calculated based on ohmic losses, while the cost of using transmission lines using the MW - mile method. As a result, this method is able to provide best allocation analysis for electrical transactions, as well as emission levels in power generation and cost analysis. As for the calculation of transmission costs, the Reverse MW-mile method produces a cheaper cost than the Absolute MW-mile method
Evaluation of solar thermal power plants using economic and performance simulations
NASA Technical Reports Server (NTRS)
El-Gabawali, N.
1980-01-01
An energy cost analysis is presented for central receiver power plants with thermal storage and point focusing power plants with electrical storage. The present approach is based on optimizing the size of the plant to give the minimum energy cost (in mills/kWe hr) of an annual plant energy production. The optimization is done by considering the trade-off between the collector field size and the storage capacity for a given engine size. The energy cost is determined by the plant cost and performance. The performance is estimated by simulating the behavior of the plant under typical weather conditions. Plant capital and operational costs are estimated based on the size and performance of different components. This methodology is translated into computer programs for automatic and consistent evaluation.
Cost Analysis of Selected Patient Categories within a Dermatology Department Using an ABC Approach
Papadaki, Šárka; Popesko, Boris
2016-01-01
Background: Present trends in hospital management are facilitating the utilization of more accurate costing methods, which potentially results in superior cost-related information and improved managerial decision-making. However, the Activity-Based Costing method (ABC), which was designed for cost allocation purposes in the 1980s, is not widely used by healthcare organizations. This study analyzes costs related to selected categories of patients, those suffering from psoriasis, varicose ulcers, eczema and other conditions, within a dermatology department at a Czech regional hospital. Methods: The study was conducted in a hospital department where both inpatient and outpatient care are offered. Firstly, the diseases treated at the department were identified. Further costs were determined for each activity using ABC. The study utilized data from managerial and financial accounting, as well as data obtained through interviews with departmental staff. Using a defined cost-allocation procedure makes it possible to determine the cost of an individual patient with a given disease more accurately than via traditional costing procedures. Results: The cost analysis focused on the differences between the costs related to individual patients within the selected diagnoses, variations between inpatient and outpatient treatments and the costs of activities performed by the dermatology department. Furthermore, comparing the costs identified through this approach and the revenue stemming from the health insurance system is an option. Conclusions: Activity-Based Costing is more accurate and relevant than the traditional costing method. The outputs of ABC provide an abundance of additional information for managers. The benefits of this research lie in its practically-tested outputs, resulting from calculating the costs of hospitalization, which could prove invaluable to persons involved in hospital management and decision-making. The study also defines the managerial implications of the performed cost analysis for the hospital management. Based on the analysis results, it is possible to standardize activities and performance appraisal (Benchmarking), and provide all necessary information for hospital budgeting practices, especially Activity-Based Budgeting (ABB). PMID:26755477
Cost Analysis of Selected Patient Categories Within A Dermatology Department Using an ABC Approach.
Papadaki, Šárka; Popesko, Boris
2015-11-17
Present trends in hospital management are facilitating the utilization of more accurate costing methods, which potentially results in superior cost-related information and improved managerial decision-making. However, the Activity-Based Costing method (ABC), which was designed for cost allocation purposes in the 1980s, is not widely used by healthcare organizations. This study analyzes costs related to selected categories of patients, those suffering from psoriasis, varicose ulcers, eczema and other conditions, within a dermatology department at a Czech regional hospital. The study was conducted in a hospital department where both inpatient and outpatient care are offered. Firstly, the diseases treated at the department were identified. Further costs were determined for each activity using ABC. The study utilized data from managerial and financial accounting, as well as data obtained through interviews with departmental staff. Using a defined cost-allocation procedure makes it possible to determine the cost of an individual patient with a given disease more accurately than via traditional costing procedures. The cost analysis focused on the differences between the costs related to individual patients within the selected diagnoses, variations between inpatient and outpatient treatments and the costs of activities performed by the dermatology department. Furthermore, comparing the costs identified through this approach and the revenue stemming from the health insurance system is an option. Activity-Based Costing is more accurate and relevant than the traditional costing method. The outputs of ABC provide an abundance of additional information for managers. The benefits of this research lie in its practically-tested outputs, resulting from calculating the costs of hospitalization, which could prove invaluable to persons involved in hospital management and decision-making. The study also defines the managerial implications of the performed cost analysis for the hospital management. Based on the analysis results, it is possible to standardize activities and performance appraisal (Benchmarking), and provide all necessary information for hospital budgeting practices, especially Activity-Based Budgeting (ABB).
Variable cost of ICU care, a micro-costing analysis.
Karabatsou, Dimitra; Tsironi, Maria; Tsigou, Evdoxia; Boutzouka, Eleni; Katsoulas, Theodoros; Baltopoulos, George
2016-08-01
Intensive care unit (ICU) costs account for a great part of a hospital's expenses. The objective of the present study was to measure the patient-specific cost of ICU treatment, to identify the most important cost drivers in ICU and to examine the role of various contributing factors in cost configuration. A retrospective cost analysis of all ICU patients who were admitted during 2011 in a Greek General, seven-bed ICU and stayed for at least 24hours was performed, by applying bottom-up analysis. Data collected included demographics and the exact cost of every single material used for patients' care. Prices were yielded from the hospital's purchasing costs and from the national price list of the imaging and laboratory tests, which was provided by the Ministry of Health. A total of 138 patients were included. Variable cost per ICU day was €573.18. A substantial cost variation was found in the total costs obtained for individual patients (median: €3443, range: €243.70-€116,355). Medicines were responsible for more than half of the cost and antibiotics accounted for the largest part of it, followed by blood products and cardiovascular drugs. Medical cause of admission, severe illness and increased length of stay, mechanical ventilation and dialysis were the factors associated with cost escalation. ICU variable cost is patient-specific, varies according to each patient's needs and is influenced by several factors. The exact estimation of variable cost is a pre-requisite in order to control ICU expenses. Copyright © 2016 Elsevier Ltd. All rights reserved.
Analysis of GaAs and Si solar energy hybrid systems
NASA Technical Reports Server (NTRS)
Heinbockel, J. H.; Roberts, A. S., Jr.
1977-01-01
Various silicon hybrid systems are modeled and compared with a gallium arsenide hybrid system. The hybrid systems modeled produce electric power and also thermal power which can be used for heating or air conditioning. Various performance indices are defined and used to compare the system performance: capital cost per electric power out; capital cost per total power out; capital cost per electric power plus mechanical power; annual cost per annual electric energy; and annual cost per annual electric energy plus annual mechanical work. These performance indices indicate that concentrator hybrid systems can be cost effective when compared with present day energy costs.
An analysis of injury claims from low-seam coal mines
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gallagher, S.; Moore, S.; Dempsey, P.G.
2009-07-01
The restricted workspace present in low-seam coal mines forces workers to adopt awkward working postures (kneeling and stooping), which place high physical demands on the knee and lower back. This article provides an analysis of injury claims for eight mining companies operating low-seam coal mines during calendar years 1996-2008. All cost data were normalized using data on the cost of medical care (MPI) as provided by the U.S. Bureau of Labor Statistics. Results of the analysis indicate that the knee was the body part that led in terms of claim cost ($4.2 million), followed by injuries to the lower backmore » ($2.7 million). While the average cost per injury for these body parts was $13,100 and $14,400, respectively (close to the average cost of an injury overall), the high frequency of these injuries resulted in their pre-eminence in terms of cost. Analysis of data from individual mining companies suggest that knee and lower back injuries were a consistent problem across companies, as these injuries were each among the top five most costly part of body for seven out of eight companies studied. Results of this investigation suggest that efforts to reduce the frequency of knee and low back injuries in low-seam mines have the potential to create substantial cost savings.« less
Moores, B. Michael
2016-01-01
In 1973, International Commission on Radiological Protection Publication 22 recommended that the acceptability of radiation exposure levels for a given activity should be determined by a process of cost–benefit analysis. It was felt that this approach could be used to underpin both the principle of ALARA as well for justification purposes. The net benefit, B, of an operation involving irradiation was regarded as equal to the difference between its gross benefit, V, and the sum of three components; the basic production cost associated with the operation, P; the cost of achieving the selected level of protection, X; and the cost Y of the detriment involved in the operation: B=V−(P+X+Y). This article presents a theoretical cost–risk–benefit analysis that is applicable to the diagnostic accuracy (Levels 1 and 2) of the hierarchical efficacy model presented by National Council on Radiation Protection and Measurements in 1992. This enables the costs of an examination to be related to the sensitivity and specificity of an X-ray examination within a defined clinical problem setting and introduces both false-positive/false-negative diagnostic outcomes into the patient radiation protection framework. PMID:26705358
Concentrator enhanced solar arrays design study
NASA Technical Reports Server (NTRS)
Lott, D. R.
1978-01-01
The analysis and preliminary design of a 25 kW concentrator enhanced lightweight flexible solar array are presented. The study was organized into five major tasks: (1) assessment and specification of design requirements; (2) mechanical design; (3) electric design; (4) concentrator design; and (5) cost projection. The tasks were conducted in an iterative manner so as to best derive a baseline design selection. The objectives of the study are discussed and comparative configurations and mass data on the SEP (Solar Electric Propulsion) array design, concentrator design options and configuration/mass data on the selected concentrator enhanced solar array baseline design are presented. Design requirements supporting design analysis and detailed baseline design data are discussed. The results of the cost projection analysis and new technology are also discussed.
Commercial Discount Rate Estimation for Efficiency Standards Analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fujita, K. Sydny
2016-04-13
Underlying each of the Department of Energy's (DOE's) federal appliance and equipment standards are a set of complex analyses of the projected costs and benefits of regulation. Any new or amended standard must be designed to achieve significant additional energy conservation, provided that it is technologically feasible and economically justified (42 U.S.C. 6295(o)(2)(A)). A proposed standard is considered economically justified when its benefits exceed its burdens, as represented by the projected net present value of costs and benefits. DOE performs multiple analyses to evaluate the balance of costs and benefits of commercial appliance and equipment e efficiency standards, at themore » national and individual building or business level, each framed to capture different nuances of the complex impact of standards on the commercial end user population. The Life-Cycle Cost (LCC) analysis models the combined impact of appliance first cost and operating cost changes on a representative commercial building sample in order to identify the fraction of customers achieving LCC savings or incurring net cost at the considered efficiency levels.1 Thus, the choice of commercial discount rate value(s) used to calculate the present value of energy cost savings within the Life-Cycle Cost model implicitly plays a key role in estimating the economic impact of potential standard levels.2 This report is intended to provide a more in-depth discussion of the commercial discount rate estimation process than can be readily included in standard rulemaking Technical Support Documents (TSDs).« less
Economic evaluation of environmental epidemiological projects in national industrial complexes.
Shin, Youngchul
2017-01-01
In this economic evaluation of environmental epidemiological monitoring projects, we analyzed the economic feasibility of these projects by determining the social cost and benefit of these projects and conducting a cost/benefit analysis. Here, the social cost was evaluated by converting annual budgets for these research and survey projects into present values. Meanwhile, the societal benefit of these projects was evaluated by using the contingent valuation method to estimate the willingness-to-pay of residents living in or near industrial complexes. In addition, the extent to which these projects reduced negative health effects (i.e., excess disease and premature death) was evaluated through expert surveys, and the analysis was conducted to reflect the unit of economic value, based on the cost of illness and benefit transfer method. The results were then used to calculate the benefit of these projects in terms of the decrease in negative health effects. For residents living near industrial complexes, the benefit/cost ratio was 1.44 in the analysis based on resident surveys and 5.17 in the analysis based on expert surveys. Thus, whichever method was used for the economic analysis, the economic feasibility of these projects was confirmed.
Pimentel, Mark; Purdy, Chris; Magar, Raf; Rezaie, Ali
2016-07-01
A high incidence of irritable bowel syndrome (IBS) is associated with significant medical costs. Diarrhea-predominant IBS (IBS-D) is diagnosed on the basis of clinical presentation and diagnostic test results and procedures that exclude other conditions. This study was conducted to estimate the potential cost savings of a novel IBS diagnostic blood panel that tests for the presence of antibodies to cytolethal distending toxin B and anti-vinculin associated with IBS-D. A cost-minimization (CM) decision tree model was used to compare the costs of a novel IBS diagnostic blood panel pathway versus an exclusionary diagnostic pathway (ie, standard of care). The probability that patients proceed to treatment was modeled as a function of sensitivity, specificity, and likelihood ratios of the individual biomarker tests. One-way sensitivity analyses were performed for key variables, and a break-even analysis was performed for the pretest probability of IBS-D. Budget impact analysis of the CM model was extrapolated to a health plan with 1 million covered lives. The CM model (base-case) predicted $509 cost savings for the novel IBS diagnostic blood panel versus the exclusionary diagnostic pathway because of the avoidance of downstream testing (eg, colonoscopy, computed tomography scans). Sensitivity analysis indicated that an increase in both positive likelihood ratios modestly increased cost savings. Break-even analysis estimated that the pretest probability of disease would be 0.451 to attain cost neutrality. The budget impact analysis predicted a cost savings of $3,634,006 ($0.30 per member per month). The novel IBS diagnostic blood panel may yield significant cost savings by allowing patients to proceed to treatment earlier, thereby avoiding unnecessary testing. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.
Space tug economic analysis study. Volume 2: Tug concepts analysis. Part 2: Economic analysis
NASA Technical Reports Server (NTRS)
1972-01-01
An economic analysis of space tug operations is presented. The subjects discussed are: (1) cost uncertainties, (2) scenario analysis, (3) economic sensitivities, (4) mixed integer programming formulation of the space tug problem, and (5) critical parameters in the evaluation of a public expenditure.
Algae Production from Wastewater Resources: An Engineering and Cost Analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schoenung, Susan; Efroymson, Rebecca Ann
Co-locating algae cultivation ponds near municipal wastewater (MWW) facilities provides the opportunity to make use of the nitrogen and phosphorus compounds in the wastewater as nutrient sources for the algae. This use benefits MWW facilities, the algae biomass and biofuel or bioproduct industry, and the users of streams where treated or untreated waste would be discharged. Nutrient compounds can lead to eutrophication, hypoxia, and adverse effects to some organisms if released downstream. This analysis presents an estimate of the cost savings made possible to cultivation facilities by using the nutrients from wastewater for algae growth rather than purchase of themore » nutrients. The analysis takes into consideration the cost of pipe transport from the wastewater facility to the algae ponds, a cost factor that has not been publicly documented in the past. The results show that the savings in nutrient costs can support a wastewater transport distance up to 10 miles for a 1000-acre-pond facility, with potential adjustments for different operating assumptions.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wayman, E. N.; Sclavounos, P. D.; Butterfield, S.
This article presents a collaborative research program that the Massachusetts Institute of Technology (MIT) and the National Renewable Energy Laboratory (NREL) have undertaken to develop innovative and cost-effective floating and mooring systems for offshore wind turbines in water depths of 10-200 m. Methods for the coupled structural, hydrodynamic, and aerodynamic analysis of floating wind turbine systems are presented in the frequency domain. This analysis was conducted by coupling the aerodynamics and structural dynamics code FAST [4] developed at NREL with the wave load and response simulation code WAMIT (Wave Analysis at MIT) [15] developed at MIT. Analysis tools were developedmore » to consider coupled interactions between the wind turbine and the floating system. These include the gyroscopic loads of the wind turbine rotor on the tower and floater, the aerodynamic damping introduced by the wind turbine rotor, the hydrodynamic damping introduced by wave-body interactions, and the hydrodynamic forces caused by wave excitation. Analyses were conducted for two floater concepts coupled with the NREL 5-MW Offshore Baseline wind turbine in water depths of 10-200 m: the MIT/NREL Shallow Drafted Barge (SDB) and the MIT/NREL Tension Leg Platform (TLP). These concepts were chosen to represent two different methods of achieving stability to identify differences in performance and cost of the different stability methods. The static and dynamic analyses of these structures evaluate the systems' responses to wave excitation at a range of frequencies, the systems' natural frequencies, and the standard deviations of the systems' motions in each degree of freedom in various wind and wave environments. This article in various wind and wave environments. This article explores the effects of coupling the wind turbine with the floating platform, the effects of water depth, and the effects of wind speed on the systems' performance. An economic feasibility analysis of the two concepts was also performed. Key cost components included the material and construction costs of the buoy; material and installation costs of the tethers, mooring lines, and anchor technologies; costs of transporting and installing the system at the chosen site; and the cost of mounting the wind turbine to the platform. The two systems were evaluated based on their static and dynamic performance and the total system installed cost. Both systems demonstrated acceptable motions, and have estimated costs of $1.4-$1.8 million, not including the cost of the wind turbine, the power electronics, or the electrical transmission.« less
Thalanany, Mariamma M; Mugford, Miranda; Hibbert, Clare; Cooper, Nicola J; Truesdale, Ann; Robinson, Steven; Tiruvoipati, Ravindranath; Elbourne, Diana R; Peek, Giles J; Clemens, Felicity; Hardy, Polly; Wilson, Andrew
2008-01-01
Background Extracorporeal Membrane Oxygenation (ECMO) is a technology used in treatment of patients with severe but potentially reversible respiratory failure. A multi-centre randomised controlled trial (CESAR) was funded in the UK to compare care including ECMO with conventional intensive care management. The protocol and funding for the CESAR trial included plans for economic data collection and analysis. Given the high cost of treatment, ECMO is considered an expensive technology for many funding systems. However, conventional treatment for severe respiratory failure is also one of the more costly forms of care in any health system. Methods/Design The objectives of the economic evaluation are to compare the costs of a policy of referral for ECMO with those of conventional treatment; to assess cost-effectiveness and the cost-utility at 6 months follow-up; and to assess the cost-utility over a predicted lifetime. Resources used by patients in the trial are identified. Resource use data are collected from clinical report forms and through follow up interviews with patients. Unit costs of hospital intensive care resources are based on parallel research on cost functions in UK NHS intensive care units. Other unit costs are based on published NHS tariffs. Cost effectiveness analysis uses the outcome: survival without severe disability. Cost utility analysis is based on quality adjusted life years gained based on the Euroqol EQ-5D at 6 months. Sensitivity analysis is planned to vary assumptions about transport costs and method of costing intensive care. Uncertainty will also be expressed in analysis of individual patient data. Probabilities of cost effectiveness given different funding thresholds will be estimated. Discussion In our view it is important to record our methods in detail and present them before publication of the results of the trial so that a record of detail not normally found in the final trial reports can be made available in the public domain. Trial Registrations The CESAR trial registration number is ISRCTN47279827. PMID:18447931
Cost Sharing in Public Universities: A Kenyan Case Study.
ERIC Educational Resources Information Center
Rodrigues, Anthony J.; Wandiga, Shem O.
1997-01-01
Presents an analysis of government policy on higher education finance in Kenya, outlines parameters of an appropriate tuition policy (cost recovery, equity, equal access, affordability, student loan program objectives), and provides a model for simulating loan program outcomes. Suggests several proposed policy and administrative reforms concerning…
Energy and Educational Facilities: Costs and Conservation.
ERIC Educational Resources Information Center
Educational Facilities Labs., Inc., New York, NY.
An analysis of energy costs and conservation in educational facilities in the United States is presented in this report. Tables and text give dollar figures for energy expenditures in education since the first oil embargo. Energy conservation through facilities management and through facilities modification is stressed. Recommendations are…
Carvalho, Brendan; Tan, Jonathan M; Macario, Alex; El-Sayed, Yasser Y; Sultan, Pervez
2013-07-01
In this study, we sought to determine whether neuraxial anesthesia to facilitate external cephalic version (ECV) increased delivery costs for breech fetal presentation. Using a computer cost model, which considers possible outcomes and probability uncertainties at the same time, we estimated total expected delivery costs for breech presentation managed by a trial of ECV with and without neuraxial anesthesia. From published studies, the average probability of successful ECV with neuraxial anesthesia was 60% (with individual studies ranging from 44% to 87%) compared with 38% (with individual studies ranging from 31% to 58%) without neuraxial anesthesia. The mean expected total delivery costs, including the cost of attempting/performing ECV with anesthesia, equaled $8931 (2.5th-97.5th percentile prediction interval $8541-$9252). The cost was $9207 (2.5th-97.5th percentile prediction interval $8896-$9419) if ECV was attempted/performed without anesthesia. The expected mean incremental difference between the total cost of delivery that includes ECV with anesthesia and ECV without anesthesia was $-276 (2.5th-97.5th percentile prediction interval $-720 to $112). The total cost of delivery in women with breech presentation may be decreased (up to $720) or increased (up to $112) if ECV is attempted/performed with neuraxial anesthesia compared with ECV without neuraxial anesthesia. Increased ECV success with neuraxial anesthesia and the subsequent reduction in breech cesarean delivery rate offset the costs of providing anesthesia to facilitate ECV.
NASA Technical Reports Server (NTRS)
Chitre, S. R.
1978-01-01
The paper presents an experimentally developed surface macro-structuring process suitable for high volume production of silicon solar cells. The process lends itself easily to automation for high throughput to meet low-cost solar array goals. The tetrahedron structure observed is 0.5 - 12 micron high. The surface has minimal pitting with virtually no or very few undeveloped areas across the surface. This process has been developed for (100) oriented as cut silicon. Chemi-etched, hydrophobic and lapped surfaces were successfully texturized. A cost analysis as per Samics is presented.
Coal liquefaction processes and development requirements analysis for synthetic fuels production
NASA Technical Reports Server (NTRS)
1980-01-01
Focus of the study is on: (1) developing a technical and programmatic data base on direct and indirect liquefaction processes which have potential for commercialization during the 1980's and beyond, and (2) performing analyses to assess technology readiness and development trends, development requirements, commercial plant costs, and projected synthetic fuel costs. Numerous data sources and references were used as the basis for the analysis results and information presented.
Analysis of cost regression and post-accident absence
NASA Astrophysics Data System (ADS)
Wojciech, Drozd
2017-07-01
The article presents issues related with costs of work safety. It proves the thesis that economic aspects cannot be overlooked in effective management of occupational health and safety and that adequate expenditures on safety can bring tangible benefits to the company. Reliable analysis of this problem is essential for the description the problem of safety the work. In the article attempts to carry it out using the procedures of mathematical statistics [1, 2, 3].
Cost analysis of carbon dioxide concentrators
NASA Technical Reports Server (NTRS)
Yakut, M. M.
1973-01-01
Methodology and cost estimating relationships, for flight-type and prototype CO2 concentrators, have been developed and presented. A validity check was made by comparing the molecular sieves system considered here and that developed for Skylab. The system evaluated here is twice the size of the Skylab system and is also more complex as it desorbs CO2 thermally and stores it in an accumulator. The cost estimates developed were found to be approximately 50 to 70% higher than the actual cost of the Skylab unit.
Livingston, Ryan; Berlund, Paul; Eccles-Smith, Jade; Sawhney, Raja
2015-01-01
"Cosmetic Tourism," the process of traveling overseas for cosmetic procedures, is an expanding global phenomenon. The model of care by which these services are delivered can limit perioperative assessment and postoperative follow-up. Our aim was to establish the number and type of complications being treated by a secondary referral hospital resulting from "cosmetic tourism" and the cost that has been incurred by the hospital in a 1-year period. Retrospective cost analysis and chart review of patients admitted to the hospital between the financial year of 2012 and 2013 were performed. Twelve "cosmetic tourism" patients presented to the hospital, requiring admission during the study period. Breast augmentation was the most common procedure and infected prosthesis was the most common complication (n = 4). Complications ranged from infection, pulmonary embolism to penile necrosis. The average cost of treating these patients was $AUD 12 597.71. The overall financial burden of the complication to the hospital was AUD$151 172.52. The "cosmetic tourism" model of care appears to be, in some cases, suboptimal for patients and their regional hospitals. In the cases presented in this study, it appears that care falls on the patient local hospital and home country to deal with the complications from their surgery abroad. This incurs a financial cost to that hospital in addition to redirecting medical resources that would otherwise be utilized for treating noncosmetic complications, without any remuneration to the local provider.
Mogasale, Vittal; Ramani, Enusa; Wee, Hyeseung; Kim, Jerome H
2016-12-01
Use of the oral cholera vaccine (OCV) is a vital short-term strategy to control cholera in endemic areas with poor water and sanitation infrastructure. Identifying, estimating, and categorizing the delivery costs of OCV campaigns are useful in analyzing cost-effectiveness, understanding vaccine affordability, and in planning and decision making by program managers and policy makers. To review and re-estimate oral cholera vaccination program costs and propose a new standardized categorization that can help in collation, analysis, and comparison of delivery costs across countries. Peer reviewed publications listed in PubMed database, Google Scholar and World Health Organization (WHO) websites and unpublished data from organizations involved in oral cholera vaccination. The publications and reports containing oral cholera vaccination delivery costs, conducted in low- and middle-income countries based on World Bank Classification. Limits are humans and publication date before December 31st, 2014. No participants are involved, only costs are collected. Oral cholera vaccination and cost estimation. A systematic review was conducted using pre-defined inclusion and exclusion criteria. Cost items were categorized into four main cost groups: vaccination program preparation, vaccine administration, adverse events following immunization and vaccine procurement; the first three groups constituting the vaccine delivery costs. The costs were re-estimated in 2014 US dollars (US$) and in international dollar (I$). Ten studies were identified and included in the analysis. The vaccine delivery costs ranged from US$0.36 to US$ 6.32 (in US$2014) which was equivalent to I$ 0.99 to I$ 16.81 (in I$2014). The vaccine procurement costs ranged from US$ 0.29 to US$ 29.70 (in US$2014), which was equivalent to I$ 0.72 to I$ 78.96 (in I$2014). The delivery costs in routine immunization systems were lowest from US$ 0.36 (in US$2014) equivalent to I$ 0.99 (in I$2014). The reported cost categories are not standardized at collection point and may lead to misclassification. Costs for some OCV campaigns are not available and analysis does not include direct and indirect costs to vaccine recipients. Vaccine delivery cost estimation is needed for budgeting and economic analysis of vaccination programs. The cost categorization methodology presented in this study is helpful in collecting OCV delivery costs in a standardized manner, comparing delivery costs, planning vaccination campaigns and informing decision-making.
Hospital pharmacy decisions, cost containment, and the use of cost-effectiveness analysis.
Sloan, F A; Whetten-Goldstein, K; Wilson, A
1997-08-01
The key hypothesis of the study was that hospital pharmacies under the pressure of managed care would be more likely to adopt process innovations to assure less costly and more cost-effective provision of care. We conducted a survey of 103 hospitals and analyzed secondary data on cost and staffing. Compared to the size of the reduction in length of stay, changes in the way that a day of care is delivered appear to be minor, even in areas with substantial managed care share. The vast majority of hospitals surveyed had implemented some form of therapeutic interchange and generic substitution. Most hospitals used some drug utilization guidelines, but as of mid 1995 these were not yet important management tools for hospital pharmacies. To our knowledge, ours was the first survey to investigate the link between hospital formularies and use of cost-effectiveness analysis. At most cost-effectiveness was a minor tool in pharmaceutical decision making in hospitals at present. We could determine no differences in use of such analyses by managed care market share in the hospital's market share. One impediment to the use of cost-effectiveness studies was the lack of timeliness of studies. Other stated reasons for not using cost-effectiveness analysis more often were: lack of information on hospitalized patients and hence on the potential cost offsets accruing to the hospital: lack of independent sponsorship, and inadequate expertise in economic evaluation.
The benefits of integrating cost-benefit analysis and risk assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fisher, K.; Clarke-Whistler, K.
1995-12-31
It has increasingly been recognized that knowledge of risks in the absence of benefits and costs cannot dictate appropriate public policy choices. Recent evidence of this recognition includes the proposed EPA Risk Assessment and Cost-Benefit Analysis Act of 1995, a number of legislative changes in Canada and the US, and the increasing demand for field studies combining measures of impacts, risks, costs and benefits. Failure to consider relative environmental and human health risks, benefits, and costs in making public policy decisions has resulted in allocating scarce resources away from areas offering the highest levels of risk reduction and improvements inmore » health and safety. The authors discuss the implications of not taking costs and benefits into account in addressing environmental risks, drawing on examples from both Canada and the US. The authors also present the results of their recent field work demonstrating the advantages of considering costs and benefits in making public policy and site remediation decisions, including a study on the benefits and costs of prevention, remediation and monitoring techniques applied to groundwater contamination; the benefits and costs of banning the use of chlorine; and the benefits and costs of Canada`s concept of disposing of high-level nuclear waste. The authors conclude that a properly conducted Cost-Benefit Analysis can provide critical input to a Risk Assessment and can ensure that risk management decisions are efficient, cost-effective and maximize improvement to environmental and human health.« less
New technologies for solar energy silicon - Cost analysis of dichlorosilane process
NASA Technical Reports Server (NTRS)
Yaws, C. L.; Li, K.-Y.; Chu, T. C. T.; Fang, C. S.; Lutwack, R.; Briglio, A., Jr.
1981-01-01
A reduction in the cost of silicon for solar cells is an important objective in a project concerned with the reduction of the cost of electricity produced with solar cells. The cost goal for the silicon material is about $14 per kg (1980 dollars). The process which is currently employed to produce semiconductor grade silicon from trichlorosilane is not suited for meeting this cost goal. Other processes for producing silicon are, therefore, being investigated. A description is presented of results obtained for the DCS process which involves the production of dichlorosilane as a silicon source material for solar energy silicon. Major benefits of dichlorosilane as a silicon source material include faster reaction rates for chemical vapor deposition of silicon. The DCS process involves the reaction 2SiHCl3 yields reversibly SiH2Cl2 + SiCl4. The results of a cost analysis indicate a total product cost without profit of $1.29/kg of SiH2Cl2.
Naing, Cho; Poovorawan, Yong; Mak, Joon Wah; Aung, Kyan; Kamolratankul, Pirom
2015-06-01
The present study aimed to assess the cost-utility analysis of using an adjunctive recombinant activated factor VIIa (rFVIIa) in children for controlling life-threatening bleeding in dengue haemorrhagic fever (DHF)/dengue shock syndrome (DSS). We constructed a decision-tree model, comparing a standard care and the use of an additional adjuvant rFVIIa for controlling life-threatening bleeding in children with DHF/DSS. Cost and utility benefit were estimated from the societal perspective. The outcome measure was cost per quality-adjusted life years (QALYs). Overall, treatment with adjuvant rFVIIa gained QALYs, but the total cost was higher. The incremental cost-utility ratio for the introduction of adjuvant rFVIIa was $4241.27 per additional QALY. Sensitivity analyses showed the utility value assigned for calculation of QALY was the most sensitive parameter. We concluded that despite high cost, there is a role for rFVIIa in the treatment of life-threatening bleeding in patients with DHF/DSS.
Fitting of full Cobb-Douglas and full VRTS cost frontiers by solving goal programming problem
NASA Astrophysics Data System (ADS)
Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Madhusudhana Rao, B.
2017-11-01
The present research article first defines two popular production functions viz, Cobb-Douglas and VRTS production frontiers and their dual cost functions and then derives their cost limited maximal outputs. This paper tells us that the cost limited maximal output is cost efficient. Here the one side goal programming problem is proposed by which the full Cobb-Douglas cost frontier, full VRTS frontier can be fitted. This paper includes the framing of goal programming by which stochastic cost frontier and stochastic VRTS frontiers are fitted. Hasan et al. [1] used a parameter approach Stochastic Frontier Approach (SFA) to examine the technical efficiency of the Malaysian domestic banks listed in the Kuala Lumpur stock Exchange (KLSE) market over the period 2005-2010. AshkanHassani [2] exposed Cobb-Douglas Production Functions application in construction schedule crashing and project risk analysis related to the duration of construction projects. Nan Jiang [3] applied Stochastic Frontier analysis to a panel of New Zealand dairy forms in 1998/99-2006/2007.
Cost analysis of youth violence prevention.
Sharp, Adam L; Prosser, Lisa A; Walton, Maureen; Blow, Frederic C; Chermack, Stephen T; Zimmerman, Marc A; Cunningham, Rebecca
2014-03-01
Effective violence interventions are not widely implemented, and there is little information about the cost of violence interventions. Our goal is to report the cost of a brief intervention delivered in the emergency department that reduces violence among 14- to 18-year-olds. Primary outcomes were total costs of implementation and the cost per violent event or violence consequence averted. We used primary and secondary data sources to derive the costs to implement a brief motivational interviewing intervention and to identify the number of self-reported violent events (eg, severe peer aggression, peer victimization) or violence consequences averted. One-way and multi-way sensitivity analyses were performed. Total fixed and variable annual costs were estimated at $71,784. If implemented, 4208 violent events or consequences could be prevented, costing $17.06 per event or consequence averted. Multi-way sensitivity analysis accounting for variable intervention efficacy and different cost estimates resulted in a range of $3.63 to $54.96 per event or consequence averted. Our estimates show that the cost to prevent an episode of youth violence or its consequences is less than the cost of placing an intravenous line and should not present a significant barrier to implementation.
Analysis of the production and transaction costs of forest carbon offset projects in the USA.
Galik, Christopher S; Cooley, David M; Baker, Justin S
2012-12-15
Forest carbon offset project implementation costs, comprised of both production and transaction costs, could present an important barrier to private landowner participation in carbon offset markets. These costs likewise represent a largely undocumented component of forest carbon offset potential. Using a custom spreadsheet model and accounting tool, this study examines the implementation costs of different forest offset project types operating in different forest types under different accounting and sampling methodologies. Sensitivity results are summarized concisely through response surface regression analysis to illustrate the relative effect of project-specific variables on total implementation costs. Results suggest that transaction costs may represent a relatively small percentage of total project implementation costs - generally less than 25% of the total. Results also show that carbon accounting methods, specifically the method used to establish project baseline, may be among the most important factors in driving implementation costs on a per-ton-of-carbon-sequestered basis, dramatically increasing variability in both transaction and production costs. This suggests that accounting could be a large driver in the financial viability of forest offset projects, with transaction costs likely being of largest concern to those projects at the margin. Copyright © 2012 Elsevier Ltd. All rights reserved.
Tan, Siok Swan; Bakker, Jan; Hoogendoorn, Marga E; Kapila, Atul; Martin, Joerg; Pezzi, Angelo; Pittoni, Giovanni; Spronk, Peter E; Welte, Robert; Hakkaart-van Roijen, Leona
2012-01-01
The objective of the present study was to measure and compare the direct costs of intensive care unit (ICU) days at seven ICU departments in Germany, Italy, the Netherlands, and the United Kingdom by means of a standardized costing methodology. A retrospective cost analysis of ICU patients was performed from the hospital's perspective. The standardized costing methodology was developed on the basis of the availability of data at the seven ICU departments. It entailed the application of the bottom-up approach for "hotel and nutrition" and the top-down approach for "diagnostics," "consumables," and "labor." Direct costs per ICU day ranged from €1168 to €2025. Even though the distribution of costs varied by cost component, labor was the most important cost driver at all departments. The costs for "labor" amounted to €1629 at department G but were fairly similar at the other departments (€711 ± 115). Direct costs of ICU days vary widely between the seven departments. Our standardized costing methodology could serve as a valuable instrument to compare actual cost differences, such as those resulting from differences in patient case-mix. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.
Khavjou, Olga A; Honeycutt, Amanda A; Hoerger, Thomas J; Trogdon, Justin G; Cash, Amanda J
2014-08-01
Community-based programs require substantial investments of resources; however, evaluations of these programs usually lack analyses of program costs. Costs of community-based programs reported in previous literature are limited and have been estimated retrospectively. To describe a prospective cost data collection approach developed for the Communities Putting Prevention to Work (CPPW) program capturing costs for community-based tobacco use and obesity prevention strategies. A web-based cost data collection instrument was developed using an activity-based costing approach. Respondents reported quarterly expenditures on labor; consultants; materials, travel, and services; overhead; partner efforts; and in-kind contributions. Costs were allocated across CPPW objectives and strategies organized around five categories: media, access, point of decision/promotion, price, and social support and services. The instrument was developed in 2010, quarterly data collections took place in 2011-2013, and preliminary analysis was conducted in 2013. Preliminary descriptive statistics are presented for the cost data collected from 51 respondents. More than 50% of program costs were for partner organizations, and over 20% of costs were for labor hours. Tobacco communities devoted the majority of their efforts to media strategies. Obesity communities spent more than half of their resources on access strategies. Collecting accurate cost information on health promotion and disease prevention programs presents many challenges. The approach presented in this paper is one of the first efforts successfully collecting these types of data and can be replicated for collecting costs from other programs. Copyright © 2014 American Journal of Preventive Medicine. All rights reserved.
The Value of Heterogeneity for Cost-Effectiveness Subgroup Analysis
Manca, Andrea; Claxton, Karl; Sculpher, Mark J.
2014-01-01
This article develops a general framework to guide the use of subgroup cost-effectiveness analysis for decision making in a collectively funded health system. In doing so, it addresses 2 key policy questions, namely, the identification and selection of subgroups, while distinguishing 2 sources of potential value associated with heterogeneity. These are 1) the value of revealing the factors associated with heterogeneity in costs and outcomes using existing evidence (static value) and 2) the value of acquiring further subgroup-related evidence to resolve the uncertainty given the current understanding of heterogeneity (dynamic value). Consideration of these 2 sources of value can guide subgroup-specific treatment decisions and inform whether further research should be conducted to resolve uncertainty to explain variability in costs and outcomes. We apply the proposed methods to a cost-effectiveness analysis for the management of patients with acute coronary syndrome. This study presents the expected net benefits under current and perfect information when subgroups are defined based on the use and combination of 6 binary covariates. The results of the case study confirm the theoretical expectations. As more subgroups are considered, the marginal net benefit gains obtained under the current information show diminishing marginal returns, and the expected value of perfect information shows a decreasing trend. We present a suggested algorithm that synthesizes the results to guide policy. PMID:24944196
Espinoza, Manuel A; Manca, Andrea; Claxton, Karl; Sculpher, Mark J
2014-11-01
This article develops a general framework to guide the use of subgroup cost-effectiveness analysis for decision making in a collectively funded health system. In doing so, it addresses 2 key policy questions, namely, the identification and selection of subgroups, while distinguishing 2 sources of potential value associated with heterogeneity. These are 1) the value of revealing the factors associated with heterogeneity in costs and outcomes using existing evidence (static value) and 2) the value of acquiring further subgroup-related evidence to resolve the uncertainty given the current understanding of heterogeneity (dynamic value). Consideration of these 2 sources of value can guide subgroup-specific treatment decisions and inform whether further research should be conducted to resolve uncertainty to explain variability in costs and outcomes. We apply the proposed methods to a cost-effectiveness analysis for the management of patients with acute coronary syndrome. This study presents the expected net benefits under current and perfect information when subgroups are defined based on the use and combination of 6 binary covariates. The results of the case study confirm the theoretical expectations. As more subgroups are considered, the marginal net benefit gains obtained under the current information show diminishing marginal returns, and the expected value of perfect information shows a decreasing trend. We present a suggested algorithm that synthesizes the results to guide policy. © The Author(s) 2014.
Riley, Robert F; Miller, Chadwick D; Russell, Gregory B; Harper, Erin N; Hiestand, Brian C; Hoekstra, James W; Lefebvre, Cedric W; Nicks, Bret A; Cline, David M; Askew, Kim L; Mahler, Simon A
2017-01-01
The HEART Pathway is a diagnostic protocol designed to identify low-risk patients presenting to the emergency department with chest pain that are safe for early discharge. This protocol has been shown to significantly decrease health care resource utilization compared with usual care. However, the impact of the HEART Pathway on the cost of care has yet to be reported. We performed a cost analysis of patients enrolled in the HEART Pathway trial, which randomized participants to either usual care or the HEART Pathway protocol. For low-risk patients, the HEART Pathway recommended early discharge from the emergency department without further testing. We compared index visit cost, cost at 30 days, and cardiac-related health care cost at 30 days between the 2 treatment arms. Costs for each patient included facility and professional costs. Cost at 30 days included total inpatient and outpatient costs, including the index encounter, regardless of etiology. Cardiac-related health care cost at 30 days included the index encounter and costs adjudicated to be cardiac-related within that period. Two hundred seventy of the 282 patients enrolled in the trial had cost data available for analysis. There was a significant reduction in cost for the HEART Pathway group at 30 days (median cost savings of $216 per individual), which was most evident in low-risk (Thrombolysis In Myocardial Infarction score of 0-1) patients (median savings of $253 per patient) and driven primarily by lower cardiac diagnostic costs in the HEART Pathway group. Using the HEART Pathway as a decision aid for patients with undifferentiated chest pain resulted in significant cost savings. Copyright © 2016 Elsevier Inc. All rights reserved.
Cost-benefit analysis of electronic medical record system at a tertiary care hospital.
Choi, Jong Soo; Lee, Woo Baik; Rhee, Poong-Lyul
2013-09-01
Although Electronic Medical Record (EMR) systems provide various benefits, there are both advantages and disadvantages regarding its cost-effectiveness. This study analyzed the economic effects of EMR systems using a cost-benefit analysis based on the differential costs of managerial accounting. Samsung Medical Center (SMC) is a general hospital in Korea that developed an EMR system for outpatients from 2006 to 2008. This study measured the total costs and benefits during an 8-year period after EMR adoption. The costs include the system costs of building the EMR and the costs incurred in smoothing its adoption. The benefits included cost reductions after its adoption and additional revenues from both remodeling of paper-chart storage areas and medical transcriptionists' contribution. The measured amounts were discounted by SMC's expected interest rate to calculate the net present value (NPV), benefit-cost ratio (BCR), and discounted payback period (DPP). During the analysis period, the cumulative NPV and the BCR were US$3,617 thousand and 1.23, respectively. The DPP was about 6.18 years. Although the adoption of an EMR resulted in overall growth in administrative costs, it is cost-effective since the cumulative NPV was positive. The positive NPV was attributed to both cost reductions and additional revenues. EMR adoption is not so attractive to management in that the DPP is longer than 5 years at 6.18 and the BCR is near 1 at 1.23. However, an EMR is a worthwhile investment, seeing that this study did not include any qualitative benefits and that the paper-chart system was cost-centric.
DOT National Transportation Integrated Search
2012-07-01
This report presents the Cost Benefit Analysis Test Plan for the national evaluation of the Los Angeles County Congestion Reduction Demonstration (LAC CRD) under the United States Department of Transportation (U.S. DOT) Congestion Reduction Demonstra...
Cost-Benefit Analysis of Forbearances. Executive Summary.
ERIC Educational Resources Information Center
USA Group, Inc., Indianapolis, IN.
This report presents findings and recommendations resulting from a study on the costs and benefits of a Department of Education policy of encouraging lenders of student loans to grant forbearances to borrowers who experience temporary financial hardship but do not satisfy the specific conditions required for government-prescribed deferments. The…
Plantation thinning systems in the Southern United States
Bryce J. Stokes; William F. Watson
1996-01-01
This paper reviews southern pine management and thinning practices, describes three harvesting systems for thinning, and presents production and cost estimates, and utilization rates. The costs and product recoveries were developed from published sources using a spreadsheet analysis. Systems included tree-length, flail/chip, and cut-to-length. The estimated total...
The Costs and Benefits of Increasing the Minimum Service Requirement for NROTC Graduates
2008-12-01
3. Cost Analysis ......................................................................................14 B. WOMEN AND MINORITIES IN THE NAVY...16 1. Motivations for Women and Minorities ..........................................16 2. The Present and...Another adverse effect of the MSR extension might be to change the propensity for women and minorities to accept NROTC scholarships. The history
COST FUNCTION STUDIES FOR POWER REACTORS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Heestand, J.; Wos, L.T.
1961-11-01
A function to evaluate the cost of electricity produced by a nuclear power reactor was developed. The basic equation, revenue = capital charges + profit + operating expenses, was expanded in terms of various cost parameters to enable analysis of multiregion nuclear reactors with uranium and/or plutonium for fuel. A corresponding IBM 704 computer program, which will compute either the price of electricity or the value of plutonium, is presented in detail. (auth)
Kandiyali, R; Sarginson, J H; Hollén, L I; Spickett-Jones, F; Young, A E R
2018-02-01
The objective of this economic study was to evaluate the resource use and cost associated with the management of small area burns, including the additional costs associated with unexpected illness after burn in children of less than five years of age. This study was conducted as a secondary analysis of a multi-centre prospective observational cohort study investigating the physiological response to burns in children. 452 children were included in the economic analysis (median age=1.60years, 61.3% boys, median total burn surface area [TBSA]=1.00%) with a mean length of stay of 0.69 days. Of these children, 21.5% re-presented to medical care with an unexpected illness within fourteen days of injury. The cost of managing a burn of less than 10% TBSA in a child less than five years of age was £785. The additional cost associated with the management of illness after burn was £1381. A generalised linear regression model was used to determine the association between an unexpected illness after burn, presenting child characteristics and NHS cost. Our findings may be of value to those planning economic evaluations of novel technologies in burn care. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.
Distefano, Gaetano; Caruso, Marco; La Malfa, Stefano; Gentile, Alessandra; Wu, Shu-Biao
2012-01-01
High resolution melting curve analysis (HRM) has been used as an efficient, accurate and cost-effective tool to detect single nucleotide polymorphisms (SNPs) or insertions or deletions (INDELs). However, its efficiency, accuracy and applicability to discriminate microsatellite polymorphism have not been extensively assessed. The traditional protocols used for SSR genotyping include PCR amplification of the DNA fragment and the separation of the fragments on electrophoresis-based platform. However, post-PCR handling processes are laborious and costly. Furthermore, SNPs present in the sequences flanking repeat motif cannot be detected by polyacrylamide-gel-electrophoresis based methods. In the present study, we compared the discriminating power of HRM with the traditional electrophoresis-based methods and provided a panel of primers for HRM genotyping in Citrus. The results showed that sixteen SSR markers produced distinct polymorphic melting curves among the Citrus spp investigated through HRM analysis. Among those, 10 showed more genotypes by HRM analysis than capillary electrophoresis owing to the presence of SNPs in the amplicons. For the SSR markers without SNPs present in the flanking region, HRM also gave distinct melting curves which detected same genotypes as were shown in capillary electrophoresis (CE) analysis. Moreover, HRM analysis allowed the discrimination of most of the 15 citrus genotypes and the resulting genetic distance analysis clustered them into three main branches. In conclusion, it has been approved that HRM is not only an efficient and cost-effective alternative of electrophoresis-based method for SSR markers, but also a method to uncover more polymorphisms contributed by SNPs present in SSRs. It was therefore suggested that the panel of SSR markers could be used in a variety of applications in the citrus biodiversity and breeding programs using HRM analysis. Furthermore, we speculate that the HRM analysis can be employed to analyse SSR markers in a wide range of applications in all other species.
The Future Potential of Wave Power in the US
NASA Astrophysics Data System (ADS)
Previsic, M.; Epler, J.; Hand, M.; Heimiller, D.; Short, W.; Eurek, K.
2012-12-01
The theoretical ocean wave energy resource potential exceeds 50% of the annual domestic energy demand of the US, is located in close proximity of coastal population centers, and, although variable in nature, may be more consistent and predictable than some other renewable generation technologies. As renewable electricity generation technologies, ocean wave energy offers a low air pollutant option for diversifying the US electricity generation portfolio. Furthermore, the output characteristics of these technologies may complement other renewable technologies. This study addresses: (1) The energy extraction potential from the US wave energy resource, (2) The present cost of wave technology in /kW, (3) The estimated cost of energy in /kWh, and (4) Cost levels at which the technology should see significant deployment. RE Vision Consulting in collaboration with NREL engaged in various analyses to establish present-day and future cost profiles for MHK technologies, compiled existing resource assessments and wave energy supply curves, and developed cost and deployment scenarios using the ReEDS analysis model to estimate the present-day technology cost reductions necessary to facilitate significant technology deployment in the US.
Crespo, C; Izquierdo, G; García-Ruiz, A; Granell, M; Brosa, M
2014-05-01
At present, there is a lack of economic assessments of second-line treatments for relapsing-recurring multiple sclerosis. The aim of this study was to compare the efficiency between fingolimod and natalizumab in Spain. A cost minimisation analysis model was developed for a 2-year horizon. The same relapse rate was applied to both treatment arms and the cost of resources was calculated using Spain's stipulated rates for 2012 in euros. The analysis was conducted from the perspective of Spain's national health system and an annual discount rate of 3% was applied to future costs. A sensitivity analysis was performed to validate the robustness of the model. Indirect comparison of fingolimod with natalizumab revealed no significant differences (hazard ratio between 0.82 and 1.07). The total direct cost, considering a 2-year analytical horizon, a 7.5% discount stipulated by Royal Decree, and a mean annual relapse rate of 0.22, was € 40914.72 for fingolimod and € 45890.53 for natalizumab. Of the total direct costs that were analysed, the maximum cost savings derived from prescribing fingolimod prescription was € 4363.63, corresponding to lower administration and treatment maintenance costs. Based on the sensitivity analysis performed, fingolimod use was associated with average savings of 11% (range 3.1%-18.7%). Fingolimod is more efficient than natalizumab as a second-line treatment option for relapsing-remitting multiple sclerosis and it generates savings for the Spanish national health system. Copyright © 2012 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.
Donnan, Jennifer R; Ungar, Wendy J; Mathews, Maria; Hancock-Howard, Rebecca L; Rahman, Proton
2011-08-01
An increased understanding of the genetic basis of disease creates a demand for personalized medicine and more genetic testing for diagnosis and treatment. The objective was to assess the incremental cost-effectiveness per life-month gained of thiopurine methyltransferase (TPMT) genotyping to guide doses of 6-mercaptopurine (6-MP) in children with acute lymphoblastic leukemia (ALL) compared to enzymatic testing and standard weight-based dosing. A cost-effectiveness analysis was conducted from a health care system perspective comparing costs and consequences over 3 months. Decision analysis was used to evaluate the impact of TPMT tests on preventing myelosuppression and improving survival in ALL patients receiving 6-MP. Direct medical costs included laboratory tests, medications, physician services, pharmacy and inpatient care. Probabilities were derived from published evidence. Survival was measured in life-months. The robustness of the results to variable uncertainty was tested in one-way sensitivity analyses. Probabilistic sensitivity analysis examined the impact of parameter uncertainty and generated confidence intervals around point estimates. Neither of the testing interventions showed a benefit in survival compared to weight-based dosing. Both test strategies were more costly compared to weight-based dosing. Incremental costs per child (95% confidence interval) were $277 ($112, $442) and $298 ($392, $421) for the genotyping and phenotyping strategies, respectively, compared to weight-based dosing. The present analysis suggests that screening for TPMT mutations using either genotype or enzymatic laboratory tests prior to the administration of 6-MP in pediatric ALL patients is not cost-effective. Copyright © 2011 Wiley-Liss, Inc.
Cost-benefit analysis of riparian protection in an eastern Canadian watershed.
Trenholm, Ryan; Lantz, Van; Martínez-Espiñeira, Roberto; Little, Shawn
2013-02-15
Forested riparian buffers have proved to be an effective management practice that helps maintain ecological goods and services in watersheds. In this study, we assessed the non-market benefits and opportunity costs associated with implementing these buffers in an eastern Canadian watershed using contingent valuation and wood supply modeling methods, respectively. A number of buffer scenarios were considered, including 30 and 60 m buffers on woodlots and on all land (including woodlots, agricultural, and residential lands) in the watershed. Household annual WTP estimates ranged from -$6.80 to $42.85, and total present value benefits ranged from -$11.7 to $121.7 million (CDN 2007), depending on the buffer scenario, affected population, time horizon, and econometric modeling assumptions considered. Opportunity cost estimates range from $1.3 to $10.4 million in present value terms, depending on silvicultural and agriculture land rental rate assumptions. Overall, we found that the net present value of riparian buffers was positive for the majority of scenarios and assumptions. Some exceptions were found under more conservative benefit, and higher unit cost, assumptions. These results provide decision makers with data on stated benefits and opportunity costs of riparian buffers, as well as insight into the importance of modeling assumptions when using this framework of analysis. Copyright © 2012 Elsevier Ltd. All rights reserved.
Investment alternative: the status quo or PACS?
NASA Astrophysics Data System (ADS)
Vanden Brink, John A.; Cywinski, Jozef K.
1990-08-01
While the cost of Picture Archiving and Communication Systems (PACS) can be substantial, the cost of continuing with present manual methods may become prohibitive in growing departments as the need for additional space and personnel (both technical and professional) to meet the increasing requirements for all image management activities continues to grow. This will occur simultaneously with increasing pressures on problems of the present system, i.e., lost films, lost revenues, delayed reporting and longer diagnostic cycle times. Present methods of image archiving communication and management i.e. the relationship of procedure volume to VFE requirements for professional and technical personnel, costs of film, film storage space, and other performance factors are analyzed based on the database created by the Technology Marketing Group (TMG) computerized cost analysis model applied to over 50 US hospitals. Also, the model is used to provide the projected cost of present methods of film management for an average US 400 +bed hospital based on ten year growth rate assumptions. TMG PACS Tracking data provides confirmation of staffmg pattern correlation to procedure volume. The data presented in the paper provides a basis for comparing the investment in maintaining the status quo to an investment in PACS.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, Lijuan; Gonder, Jeff; Brooker, Aaron
This study evaluated the costs and benefits associated with the use of stationary-wireless-power-transfer-enabled plug-in hybrid electric buses and determined the cost effectiveness relative to conventional buses and hybrid electric buses. A factorial design was performed over a number of different battery sizes, charging power levels, and f bus stop charging stations. The net present costs were calculated for each vehicle design and provided the basis for design evaluation. In all cases, given the assumed economic conditions, the conventional bus achieved the lowest net present cost while the optimal plug-in hybrid electric bus scenario beat out the hybrid electric comparison scenario.more » The parameter sensitivity was also investigated under favorable and unfavorable market penetration assumptions.« less
MESA - A new approach to low cost scientific spacecraft
NASA Astrophysics Data System (ADS)
Keyes, G. W.; Case, C. M.
1982-09-01
Today, the greatest obstacle to science and exploration in space is its cost. The present investigation is concerned with approaches for reducing this cost. Trends in the scientific spacecraft market are examined, and a description is presented for the MESA space platform concept. The cost drivers are considered, taking into account planning, technical aspects, and business factors. It is pointed out that the primary function of the MESA concept is to provide a satellite system at the lowest possible price. In order to reach this goal an attempt is made to benefit from all of the considered cost drivers. It is to be tried to work with the customer early in the mission analysis stage in order to assist in finding the right compromise between mission cost and return. A three phase contractual arrangement is recommended for MESA platforms. The phases are related to mission feasibility, specification definition, and design and development. Modular kit design promotes flexibility at low cost.
Depth of manual dismantling analysis: a cost-benefit approach.
Achillas, Ch; Aidonis, D; Vlachokostas, Ch; Karagiannidis, A; Moussiopoulos, N; Loulos, V
2013-04-01
This paper presents a decision support tool for manufacturers and recyclers towards end-of-life strategies for waste electrical and electronic equipment. A mathematical formulation based on the cost benefit analysis concept is herein analytically described in order to determine the parts and/or components of an obsolete product that should be either non-destructively recovered for reuse or be recycled. The framework optimally determines the depth of disassembly for a given product, taking into account economic considerations. On this basis, it embeds all relevant cost elements to be included in the decision-making process, such as recovered materials and (depreciated) parts/components, labor costs, energy consumption, equipment depreciation, quality control and warehousing. This tool can be part of the strategic decision-making process in order to maximize profitability or minimize end-of-life management costs. A case study to demonstrate the models' applicability is presented for a typical electronic product in terms of structure and material composition. Taking into account the market values of the pilot product's components, the manual disassembly is proven profitable with the marginal revenues from recovered reusable materials to be estimated at 2.93-23.06 €, depending on the level of disassembly. Copyright © 2013 Elsevier Ltd. All rights reserved.
Systems Analysis Of Advanced Coal-Based Power Plants
NASA Technical Reports Server (NTRS)
Ferrall, Joseph F.; Jennings, Charles N.; Pappano, Alfred W.
1988-01-01
Report presents appraisal of integrated coal-gasification/fuel-cell power plants. Based on study comparing fuel-cell technologies with each other and with coal-based alternatives and recommends most promising ones for research and development. Evaluates capital cost, cost of electricity, fuel consumption, and conformance with environmental standards. Analyzes sensitivity of cost of electricity to changes in fuel cost, to economic assumptions, and to level of technology. Recommends further evaluation of integrated coal-gasification/fuel-cell integrated coal-gasification/combined-cycle, and pulverized-coal-fired plants. Concludes with appendixes detailing plant-performance models, subsystem-performance parameters, performance goals, cost bases, plant-cost data sheets, and plant sensitivity to fuel-cell performance.
A systematic review and cost-effectiveness analysis of tonometer disinfection methods.
Omar Akhtar, Ahmad; Singh, Hargurinder; Si, Francie; Hodge, William G
2014-08-01
The Goldmann applanation tonometer presents the problem of being one of the most widely used pieces of equipment in the ophthalmic clinic and a known risk factor for the transmission of epidemic keratoconjunctivitis (EKC). The purpose of this review is to assess the effectiveness of 3 methods of disinfection: alcohol swabs, immersion in peroxide, and the use of disposable prisms. An economic evaluation is undertaken to assess the cost-effectiveness of the 3 alternatives. In doing so, we contribute an evidence-based overview of the issue at an opportune time, because several jurisdictions are developing protocols regarding tonometer tip disinfection. Systematic review and cost-effectiveness analysis. A comprehensive literature review was undertaken with a librarian, comprising searches of 6 electronic databases and hand searches of the grey literature. A 3-level screening process was undertaken by 2 reviewers according to prespecified inclusion and exclusion criteria. Values from included papers were used to inform a cost-effectiveness analysis undertaken using a decision tree model implemented in TreeAge. The analysis was undertaken from the hospital perspective and included all equipment and labour costs. Synthesis of in vitro data indicates that all 3 methods are plausible methods of disinfection with a 64% reduction in log growth of EKC when peroxide is used compared with alcohol swabs. The incremental cost-effective ratios from the cost-effectiveness analysis were $12,000/case averted using peroxide and $61,000/case averted with Tonosafe as compared with alcohol. Assuming clinical infection rates match in vitro disinfection data, the cost of bleach is high and the cost of Tonosafe is unacceptably high to reduce 1 potential case of adenoviral keratoconjunctivitis. Copyright © 2014. Published by Elsevier Inc.
Design of a Low Cost Short Takeoff-vertical Landing Export Fighter/attack Aircraft
NASA Technical Reports Server (NTRS)
Belcher, Anne; Bodeker, Dan, III; Miu, Steve; Petro, Laura; Senf, Cary Taylor; Woeltjen, Donald
1990-01-01
The design of a supersonic short takeoff and vertical landing (STOVL) aircraft is presented that is suitable for export. An advanced four poster, low bypass turbofan engine is to be used for propulsion. Preliminary aerodynamic analysis is presented covering a determination of CD versus CL, CD versus Mach number, as well as best cruise Mach number and altitude. Component locations are presented and center of gravity determined. Cost minimization is achieved through the use of developed subsystems and standard fabrication techniques using nonexotic materials. Conclusions regarding the viability of the STOVL design are presented.
A Didactic Analysis of Functional Queues
ERIC Educational Resources Information Center
Rinderknecht, Christian
2011-01-01
When first introduced to the analysis of algorithms, students are taught how to assess the best and worst cases, whereas the mean and amortized costs are considered advanced topics, usually saved for graduates. When presenting the latter, aggregate analysis is explained first because it is the most intuitive kind of amortized analysis, often…
Carvalho, Natalie; Jit, Mark; Cox, Sarah; Yoong, Joanne; Hutubessy, Raymond C W
2018-01-01
In low- and middle-income countries, budget impact is an important criterion for funding new interventions, particularly for large public health investments such as new vaccines. However, budget impact analyses remain less frequently conducted and less well researched than cost-effectiveness analyses. The objective of this study was to fill the gap in research on budget impact analyses by assessing (1) the quality of stand-alone budget impact analyses, and (2) the feasibility of extending cost-effectiveness analyses to capture budget impact. We developed a budget impact analysis checklist and scoring system for budget impact analyses, which we then adapted for cost-effectiveness analyses, based on current International Society for Pharmacoeconomics and Outcomes Research Task Force recommendations. We applied both budget impact analysis and cost-effectiveness analysis checklists and scoring systems to examine the extent to which existing economic evaluations provide sufficient evidence about budget impact to enable decision making. We used rotavirus vaccination as an illustrative case in which low- and middle-income countries uptake has been limited despite demonstrated cost effectiveness. A systematic literature review was conducted to identify economic evaluations of rotavirus vaccine in low- and middle-income countries published between January 2000 and February 2017. We critically appraised the quality of budget impact analyses, and assessed the extension of cost-effectiveness analyses to provide useful budget impact information. Six budget impact analyses and 60 cost-effectiveness analyses were identified. Budget impact analyses adhered to most International Society for Pharmacoeconomics and Outcomes Research recommendations, with key exceptions being provision of undiscounted financial streams for each budget period and model validation. Most cost-effectiveness analyses could not be extended to provide useful budget impact information; cost-effectiveness analyses also rarely presented undiscounted annual costs, or estimated financial streams during the first years of programme scale-up. Cost-effectiveness analyses vastly outnumber budget impact analyses of rotavirus vaccination, despite both being critical for policy decision making. Straightforward changes to the presentation of cost-effectiveness analyses results could facilitate their adaptation into budget impact analyses.
Regulatory Impact Analysis for the Final Cross-State Air Pollution Rule
This Regulatory Impact Analysis (RIA) presents the health and welfare benefits, costs, and other impacts of the Transport Rule, also called the Cross-State Air Pollution Rule, focusing primarily on 2014.
Chadha, V K; Sebastian, George; Kumar, P
2016-01-01
We undertook cost analysis for diagnosis of pulmonary tuberculosis (PTB) using present algorithm under Revised National Tuberculosis Control programme and using Xpert MTB/RIF (Xpert) as frontline test or in conjunction with smear microscopy and/or chest radiography. Costs were estimated for different strategies: (A) present algorithm involving sputum smear examination followed by antibiotic trial in smear negative patients, repeat smear examination (RE) if symptoms continue and chest radiography if RE negative; (B) direct Xpert; (C) smear microscopy followed by Xpert in smear negative patients; (D) radiography followed by Xpert in those having abnormal pulmonary shadows; and (E) smear examination followed by radiography among smear negative patients and Xpert in presence of abnormal pulmonary shadow. Cost to program was estimated lowest with Strategy A and highest with Strategy B. Compared to the latter, program cost reduces by 7%, 4.5%, and 17.4% by strategies C, D, and E, respectively. Cost to the group of individuals with presumptive PTB and their attendants is significantly higher for Strategy A compared to other four strategies. Among the latter, the patients' cost was minimum with Strategy B and maximum with Strategy C. Program cost per case diagnosed was lowest by Strategy A and highest by Strategy B. Patient cost per case diagnosed was highest by Strategy A and lowest by Strategy B. Using Xpert, Strategy E had the lowest program as well as overall cost per case diagnosed. Strategy E may be chosen for diagnosis of PTB. When resources would no longer be a constraint, direct Xpert would reduce costs incurred by the patients. Copyright © 2016 Tuberculosis Association of India. Published by Elsevier B.V. All rights reserved.
Offshore Wind Plant Balance-of-Station Cost Drivers and Sensitivities (Poster)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Saur, G.; Maples, B.; Meadows, B.
2012-09-01
With Balance of System (BOS) costs contributing up to 70% of the installed capital cost, it is fundamental to understanding the BOS costs for offshore wind projects as well as potential cost trends for larger offshore turbines. NREL developed a BOS model using project cost estimates developed by GL Garrad Hassan. Aspects of BOS covered include engineering and permitting, ports and staging, transportation and installation, vessels, foundations, and electrical. The data introduce new scaling relationships for each BOS component to estimate cost as a function of turbine parameters and size, project parameters and size, and soil type. Based on themore » new BOS model, an analysis to understand the non-turbine costs associated with offshore turbine sizes ranging from 3 MW to 6 MW and offshore wind plant sizes ranging from 100 MW to 1000 MW has been conducted. This analysis establishes a more robust baseline cost estimate, identifies the largest cost components of offshore wind project BOS, and explores the sensitivity of the levelized cost of energy to permutations in each BOS cost element. This presentation shows results from the model that illustrates the potential impact of turbine size and project size on the cost of energy from US offshore wind plants.« less
[Experience of a Break-Even Point Analysis for Make-or-Buy Decision.].
Kim, Yunhee
2006-12-01
Cost containment through continuous quality improvement of medical service is required in an age of a keen competition of the medical market. Laboratory managers should examine the matters on make-or-buy decision periodically. On this occasion, a break-even point analysis can be useful as an analyzing tool. In this study, cost accounting and break-even point (BEP) analysis were performed in case that the immunoassay items showing a recent increase in order volume were to be in-house made. Fixed and variable costs were calculated in case that alpha fetoprotein (AFP), carcinoembryonic antigen (CEA), prostate-specific antigen (PSA), ferritin, free thyroxine (fT4), triiodothyronine (T3), thyroid-stimulating hormone (TSH), CA 125, CA 19-9, and hepatitis B envelope antibody (HBeAb) were to be tested with Abbott AxSYM instrument. Break-even volume was calculated as fixed cost per year divided by purchasing cost per test minus variable cost per test and BEP ratio as total purchasing costs at break-even volume divided by total purchasing costs at actual annual volume. The average fixed cost per year of AFP, CEA, PSA, ferritin, fT4, T3, TSH, CA 125, CA 19-9, and HBeAb was 8,279,187 won and average variable cost per test, 3,786 won. Average break-even volume was 1,599 and average BEP ratio was 852%. Average BEP ratio without including quality costs such as calibration and quality control was 74%. Because the quality assurance of clinical tests cannot be waived, outsourcing all of 10 items was more adequate than in-house make at the present volume in financial aspect. BEP analysis was useful as a financial tool for make-or-buy decision, the common matter which laboratory managers meet with.
Advanced Technology Lifecycle Analysis System (ATLAS)
NASA Technical Reports Server (NTRS)
O'Neil, Daniel A.; Mankins, John C.
2004-01-01
Developing credible mass and cost estimates for space exploration and development architectures require multidisciplinary analysis based on physics calculations, and parametric estimates derived from historical systems. Within the National Aeronautics and Space Administration (NASA), concurrent engineering environment (CEE) activities integrate discipline oriented analysis tools through a computer network and accumulate the results of a multidisciplinary analysis team via a centralized database or spreadsheet Each minute of a design and analysis study within a concurrent engineering environment is expensive due the size of the team and supporting equipment The Advanced Technology Lifecycle Analysis System (ATLAS) reduces the cost of architecture analysis by capturing the knowledge of discipline experts into system oriented spreadsheet models. A framework with a user interface presents a library of system models to an architecture analyst. The analyst selects models of launchers, in-space transportation systems, and excursion vehicles, as well as space and surface infrastructure such as propellant depots, habitats, and solar power satellites. After assembling the architecture from the selected models, the analyst can create a campaign comprised of missions spanning several years. The ATLAS controller passes analyst specified parameters to the models and data among the models. An integrator workbook calls a history based parametric analysis cost model to determine the costs. Also, the integrator estimates the flight rates, launched masses, and architecture benefits over the years of the campaign. An accumulator workbook presents the analytical results in a series of bar graphs. In no way does ATLAS compete with a CEE; instead, ATLAS complements a CEE by ensuring that the time of the experts is well spent Using ATLAS, an architecture analyst can perform technology sensitivity analysis, study many scenarios, and see the impact of design decisions. When the analyst is satisfied with the system configurations, technology portfolios, and deployment strategies, he or she can present the concepts to a team, which will conduct a detailed, discipline-oriented analysis within a CEE. An analog to this approach is the music industry where a songwriter creates the lyrics and music before entering a recording studio.
Herzer, Kurt R; Niessen, Louis; Constenla, Dagna O; Ward, William J; Pronovost, Peter J
2014-01-01
Objective To assess the cost-effectiveness of a multifaceted quality improvement programme focused on reducing central line-associated bloodstream infections in intensive care units. Design Cost-effectiveness analysis using a decision tree model to compare programme to non-programme intensive care units. Setting USA. Population Adult patients in the intensive care unit. Costs Economic costs of the programme and of central line-associated bloodstream infections were estimated from the perspective of the hospital and presented in 2013 US dollars. Main outcome measures Central line-associated bloodstream infections prevented, deaths averted due to central line-associated bloodstream infections prevented, and incremental cost-effectiveness ratios. Probabilistic sensitivity analysis was performed. Results Compared with current practice, the programme is strongly dominant and reduces bloodstream infections and deaths at no additional cost. The probabilistic sensitivity analysis showed that there was an almost 80% probability that the programme reduces bloodstream infections and the infections’ economic costs to hospitals. The opportunity cost of a bloodstream infection to a hospital was the most important model parameter in these analyses. Conclusions This multifaceted quality improvement programme, as it is currently implemented by hospitals on an increasingly large scale in the USA, likely reduces the economic costs of central line-associated bloodstream infections for US hospitals. Awareness among hospitals about the programme's benefits should enhance implementation. The programme's implementation has the potential to substantially reduce morbidity, mortality and economic costs associated with central line-associated bloodstream infections. PMID:25256190
Albright, Rachel H; Haller, Sarah; Klein, Erin; Baker, Jeffrey R; Weil, Lowell; Weil, Lowell S; Fleischer, Adam E
The purpose of the present study was to determine whether surgical intervention with open reduction internal fixation (ORIF) or primary arthrodesis (PA) for Lisfranc injuries is more cost effective. We conducted a formal cost-effectiveness analysis using a Markov model and decision tree to explore the healthcare costs and health outcomes associated with a scenario of ORIF versus PA for 45 years postoperatively. The outcomes assessed included long-term costs, quality-adjusted life-years (QALYs), and incremental cost per QALY gained. The costs were evaluated from the healthcare system perspective and are expressed in U.S. dollars at a 2017 price base. ORIF was always associated with greater costs compared with PA and was less effective in the long term. When calculating the cost required to gain 1 additional QALY, the PA group cost $1429/QALY and the ORIF group cost $3958/QALY. The group undergoing PA overall spent, on average, $43,192 less than the ORIF group, and PA was overall a more effective technique. Strong dominance compared with ORIF was demonstrated in multiple scenarios, and the model's conclusions were unchanged in the sensitivity analysis even after varying the key assumptions. ORIF failed to show functional or financial benefits. In conclusion, from a healthcare system's standpoint, PA would clearly be the preferred treatment strategy for predominantly ligamentous Lisfranc injuries and dislocations. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
A cost analysis of family planning in Bangladesh.
Fiedler, J L; Day, L M
1997-01-01
This article presents a step-down cost analysis using secondary data sources from 26 Bangladesh non-government organizations (NGOs) providing family planning services under a US Agency for International Development-funded umbrella organization. The unit costs of the NGOs' Maternal-Child Health (MCH) clinics and community-based distribution (CBD) systems were calculated and found to be minimally different. Several simulations were conducted to investigate the impact of alternative cost-reduction measures. The more general financial analysis proved more insightful than the unit cost analysis in terms of identifying means by which to improve the efficiency of the family planning operations of these NGOs. The analysis revealed that 56 per cent of total expenditures in the two-tiered umbrella's organizational structure are incurred in management operations and overheads. Of the remaining 44 per cent of project expenditures, 39 per cent is spent on the CBD program and 5 per cent on the MCH clinics. Within the CBD program, most resources are spent providing 4 million contacts (two-thirds of the annual total) which do not involve contraceptive re-supply. The clinics devote more resources to providing MCH services than to providing family planning services. The findings suggest that significant savings could be generated by containing administrative costs, improving operational efficiency, and reducing unnecessary or redundant fieldworker contacts. The magnitude of the potential savings raises a fundamental question about the continued viability and sustainability of this supply-driven CBD strategy.
Study of solid rocket motors for a space shuttle booster. Volume 2, book 1: Analysis and design
NASA Technical Reports Server (NTRS)
1972-01-01
An analysis of the factors which determined the selection of the solid rocket propellant engines for the space shuttle booster is presented. The 156 inch diameter, parallel burn engine was selected because of its transportability, cost effectiveness, and reliability. Other factors which caused favorable consideration are: (1) recovery and reuse are feasible and offer substantial cost savings, (2) abort can be easily accomplished. and (3) ecological effects are acceptable.
Proceedings of the FAA Inspection Program Area Review, Held in Ames, Iowa on April 5-7, 1994
1994-07-01
Colin Drury Mr. Locke Easton SUNY Buffalo ANE-1 00, Aircraft Certification Division, Engine and 342 Bell Mall Propeller Directorate Buffalo, NY 14260...and Tech Transfer Walter Validation: 13:10 MOI validation F. Spencer, SNL 13:30 Cost Benefit Analysis Protocol (with MOI example) V. Brechling, NWU 13...on the need for calibration of the instrument were briefly addressed. Cost -Benefit Analysis: ATA members took unexpected interest in the presentation
Guidelines for cost control and analysis of cost-type research and development contracts
NASA Technical Reports Server (NTRS)
Sibbers, C. W.
1981-01-01
The cost information which should be obtained from a contractor(s) on a major, cost type research and development contract(s), and the analyses and effective use of these data are discussed. Specific type(s) of information which should be required, methods for analyzing such information, and methods for effectively using the results of such analyses to enhance NASA contract and project management are included. The material presented is based primarily on the principal methods which have been effectively used in the management of major cost type research and development contracts.
Cost and quality trends in direct contracting arrangements.
Lyles, Alan; Weiner, Jonathan P; Shore, Andrew D; Christianson, Jon; Solberg, Leif I; Drury, Patricia
2002-01-01
This paper presents the first empirical analysis of a 1997 initiative of the Buyers Health Care Action Group (BHCAG) known as Choice Plus. This initiative entailed direct contracts with provider-controlled delivery systems; annual care system bidding; public reports of consumer satisfaction and quality; uniform benefits; and risk-adjusted payment. After case-mix adjustment, hospital costs decreased, ambulatory care costs rose modestly, and pharmacy costs increased substantially. Process-oriented quality indicators were stable or improved. The BHCAG employer-to-provider direct contracting and consumer choice model appeared to perform reasonably well in containing costs, without measurable adverse effects on quality.
Systems Engineering and Integration (SE and I)
NASA Technical Reports Server (NTRS)
Chevers, ED; Haley, Sam
1990-01-01
The issue of technology advancement and future space transportation vehicles is addressed. The challenge is to develop systems which can be evolved and improved in small incremental steps where each increment reduces present cost, improves, reliability, or does neither but sets the stage for a second incremental upgrade that does. Future requirements are interface standards for commercial off the shelf products to aid in the development of integrated facilities; enhanced automated code generation system slightly coupled to specification and design documentation; modeling tools that support data flow analysis; and shared project data bases consisting of technical characteristics cast information, measurement parameters, and reusable software programs. Topics addressed include: advanced avionics development strategy; risk analysis and management; tool quality management; low cost avionics; cost estimation and benefits; computer aided software engineering; computer systems and software safety; system testability; and advanced avionics laboratories - and rapid prototyping. This presentation is represented by viewgraphs only.
Seminar presentation on the economic evaluation of the space shuttle system
NASA Technical Reports Server (NTRS)
1973-01-01
The proceedings of a seminar on the economic aspects of the space shuttle system are presented. Emphasis was placed on the problems of economic analysis of large scale public investments, the state of the art of cost estimation, the statistical data base for estimating costs of new technological systems, and the role of the main economic parameters affecting the results of the analyses. An explanation of the system components of a space program and the present choice of launch vehicles, spacecraft, and instruments was conducted.
CubeSat mechanical design: creating low mass and durable structures
NASA Astrophysics Data System (ADS)
Fiedler, Gilbert; Straub, Jeremy
2017-05-01
This paper considers the mechanical design of a low-mass, low-cost spacecraft for use in a multi-satellite sensing constellation. For a multi-spacecraft mission, aggregated small mass and cost reductions can have significant impact. One approach to mass reduction is to make cuts into the structure, removing material. Stress analysis is used to determine the level of material reduction possible. Focus areas for this paper include determining areas to make cuts to ensure that a strong shape remains, while considering the comparative cost and skill level of each type of cut. Real-world results for a CubeSat and universally applicable analysis are presented.
Apollo/Skylab suit program management systems study. Volume 2: Cost analysis
NASA Technical Reports Server (NTRS)
1974-01-01
The business management methods employed in the performance of the Apollo-Skylab Suit Program are studied. The data accumulated over the span of the contract as well as the methods used to accumulate the data are examined. Management methods associated with the monitoring and control of resources applied towards the performance of the contract are also studied and recommended upon. The primary objective is the compilation, analysis, and presentation of historical cost performance criteria. Cost data are depicted for all phases of the Apollo-Skylab program in common, meaningful terms, whereby the data may be applicable to future suit program planning efforts.
Cost of illness due to typhoid Fever in pemba, zanzibar, East Africa.
Riewpaiboon, Arthorn; Piatti, Moritz; Ley, Benedikt; Deen, Jacqueline; Thriemer, Kamala; von Seidlein, Lorenz; Salehjiddawi, Mohammad; Busch, Clara Jana-Lui; Schmied, Wolfgang H; Ali, Said Mohammed; The Typhoid Economic Study Group GiDeok Pak Leon R Ochiai Mahesh K Puri Na Yoon Chang Thomas F Wierzba And John D Clemens
2014-09-01
The aim of this study was to estimate the economic burden of typhoid fever in Pemba, Zanzibar, East Africa. This study was an incidence-based cost-of-illness analysis from a societal perspective. It covered new episodes of blood culture-confirmed typhoid fever in patients presenting at the outpatient or inpatient departments of three district hospitals between May 2010 and December 2010. Cost of illness was the sum of direct costs and costs for productivity loss. Direct costs covered treatment, travel, and meals. Productivity costs were loss of income by patients and caregivers. The analysis included 17 episodes. The mean age of the patients, was 23 years (range=5-65, median=22). Thirty-five percent were inpatients, with a mean of 4.75 days of hospital stay (range=3-7, median=4.50). The mean cost for treatment alone during hospital care was US$ 21.97 at 2010 prices (US$ 1=1,430.50 Tanzanian Shilling─TSH). The average societal cost was US$ 154.47 per typhoid episode. The major expenditure was productivity cost due to lost wages of US$ 128.02 (83%). Our results contribute to the further economic evaluation of typhoid fever vaccination in Zanzibar and other sub-Saharan African countries.
Yasutaka, Tetsuo; Naito, Wataru; Nakanishi, Junko
2013-01-01
The objective of the present study is to evaluate the cost and effectiveness of decontamination strategies in the special decontamination areas in Fukushima in regard to external radiation dose. A geographical information system (GIS) was used to relate the predicted external dose in the affected areas to the number of potential inhabitants and the land use in the areas. A comprehensive review of the costs of various decontamination methods was conducted as part of the analysis. The results indicate that aerial decontamination in the special decontamination areas in Fukushima would be effective for reducing the air dose rate to the target level in a short period of time in some but not all of the areas. In a standard scenario, analysis of cost and effectiveness suggests that decontamination costs for agricultural areas account for approximately 80% of the total decontamination cost, of which approximately 60% is associated with storage. In addition, the costs of decontamination per person per unit area are estimated to vary greatly. Appropriate selection of decontamination methods may significantly decrease decontamination costs, allowing more meaningful decontamination in terms of the limited budget. Our analysis can help in examining the prioritization of decontamination areas from the viewpoints of cost and effectiveness in reducing the external dose. Decontamination strategies should be determined according to air dose rates and future land-use plans. PMID:24069398
Yasutaka, Tetsuo; Naito, Wataru; Nakanishi, Junko
2013-01-01
The objective of the present study is to evaluate the cost and effectiveness of decontamination strategies in the special decontamination areas in Fukushima in regard to external radiation dose. A geographical information system (GIS) was used to relate the predicted external dose in the affected areas to the number of potential inhabitants and the land use in the areas. A comprehensive review of the costs of various decontamination methods was conducted as part of the analysis. The results indicate that aerial decontamination in the special decontamination areas in Fukushima would be effective for reducing the air dose rate to the target level in a short period of time in some but not all of the areas. In a standard scenario, analysis of cost and effectiveness suggests that decontamination costs for agricultural areas account for approximately 80% of the total decontamination cost, of which approximately 60% is associated with storage. In addition, the costs of decontamination per person per unit area are estimated to vary greatly. Appropriate selection of decontamination methods may significantly decrease decontamination costs, allowing more meaningful decontamination in terms of the limited budget. Our analysis can help in examining the prioritization of decontamination areas from the viewpoints of cost and effectiveness in reducing the external dose. Decontamination strategies should be determined according to air dose rates and future land-use plans.
Cost-effectiveness of detecting and treating diabetic retinopathy.
Javitt, J C; Aiello, L P
1996-01-01
To determine, from the health insurer's perspective, the cost of preventing vision loss in patients with diabetes mellitus through ophthalmologic screening and treatment and to calculate the cost-effectiveness of these interventions as compared with that of other medical interventions. Computer modeling, incorporating data from population-based epidemiologic studies and multicenter clinical trials. Monte Carlo simulation was used, combined with sensitivity analysis and present value analysis of cost savings. Screening and treatment of eye disease in patients with diabetes mellitus costs $3190 per quality-adjusted life-year (QALY) saved. This average cost is a weighted average (based on prevalence disease) of the cost-effectiveness of detecting and treating diabetic eye disease in those with insulin-dependent diabetes mellitus ($1996 per QALY), those with non-insulin-dependent diabetes mellitus (NIDDM) who use insulin for glycemic control ($2933 per QALY), and those with NIDDM who do not use insulin for glycemic control ($3530 per QALY). Our analysis indicates that prevention programs aimed at improving eye care for diabetic persons not only result in substantial federal budgetary savings but are highly cost-effective health investments for society. Ophthalmologic screening for diabetic persons is more cost-effective than many routinely provided health interventions. Because diabetic eye disease is the leading cause of new cases of blindness among working-age Americans, these results support the widespread use of screening and treatment for diabetic eye disease.
Kovács, Gábor; Somogyvári, Zsolt; Maka, Erika; Nagyjánosi, László
Peter Cerny Ambulance Service - Premature Eye Rescue Program (PCA-PERP) uses digital retinal imaging (DRI) with remote interpretation in bedside ROP screening, which has advantages over binocular indirect ophthalmoscopy (BIO) in screening of premature newborns. We aimed to demonstrate that PCA-PERP provides good value for the money and to model the cost ramifications of a similar newly launched system. As DRI was demonstrated to have high diagnostic performance, only the costs of bedside DRI-based screening were compared to those of traditional transport and BIO-based screening (cost-minimization analysis). The total costs of investment and maintenance were analyzed with micro-costing method. A ten-year analysis time-horizon and service provider's perspective were applied. From the launch of PCA-PERP up to the end of 2014, 3722 bedside examinations were performed in the PCA covered central region of Hungary. From 2009 to 2014, PCA-PERP saved 92,248km and 3633 staff working hours, with an annual nominal cost-savings ranging from 17,435 to 35,140 Euro. The net present value was 127,847 Euro at the end of 2014, with a payback period of 4.1years and an internal rate of return of 20.8%. Our model presented the NPVs of different scenarios with different initial investments, annual number of transports and average transport distances. PCA-PERP as bedside screening with remote interpretation, when compared to a transport-based screening with BIO, produced better cost-savings from the perspective of the service provider and provided a return on initial investment within five years after the project initiation. Copyright © 2017 Elsevier B.V. All rights reserved.
Kochhar, Puja; Suvarna, Viraj; Duttagupta, Sandeep; Sarkar, Shirsendu
2008-03-01
This article presents the methodology and results of the pharmacoeconomic analysis of the Magnex Against Standard COmbination Therapy study comparing cefoperazone-sulbactam (Magnex) versus ceftazidime+ amikacin+metronidazole, in the treatment of intra-abdominal infections. This prospective, open label, phase IV study was conducted at 17 study sites in India and randomized subjects to receive either cefoperazone-sulbactam or the combination. Pharmacoeconomic analysis was included as a secondary objective and conducted in the clinical efficacy-evaluable (CEE) and the successfully treated patients. All comparisons between treatment groups were conducted using analysis of variance (ANOVA) or Wilcoxon Two-Sample tests. All costs were reported as Indian Rupee (INR) and actual unit costs collected in 2006 were used for the analyses [1 USD approximately 40 INR; 1 Euro approximately 56 INR]. In the CEE and the successfully treated subset of patients, the average cost of treatment was numerically lower in the cefoperazone-sulbactam arm (not statistically significant). The analyses found that the cost-effectiveness ratio (CER) for cefoperazone-sulbactam was INR 17,640.53 and that for the comparator group was INR 22,075.16. Additionally, the incremental CER results showed that the cost of treatment was INR 21,505.59 lower per additional successfully treated patient in the cefoperazone-sulbactam group. The present study was the first of its kind to be conducted in the "price sensitive" Indian health-care setting. Though study was not powered for the difference in average cost of treatments, there was a trend favoring cefoperazone sulbactam. The findings from this study should encourage further conduct of similar analyses and increase the knowledge regarding pharmacoeconomics in India.
Clinical Laboratory Automation: A Case Study
Archetti, Claudia; Montanelli, Alessandro; Finazzi, Dario; Caimi, Luigi; Garrafa, Emirena
2017-01-01
Background This paper presents a case study of an automated clinical laboratory in a large urban academic teaching hospital in the North of Italy, the Spedali Civili in Brescia, where four laboratories were merged in a unique laboratory through the introduction of laboratory automation. Materials and Methods The analysis compares the preautomation situation and the new setting from a cost perspective, by considering direct and indirect costs. It also presents an analysis of the turnaround time (TAT). The study considers equipment, staff and indirect costs. Results The introduction of automation led to a slight increase in equipment costs which is highly compensated by a remarkable decrease in staff costs. Consequently, total costs decreased by 12.55%. The analysis of the TAT shows an improvement of nonemergency exams while emergency exams are still validated within the maximum time imposed by the hospital. Conclusions The strategy adopted by the management, which was based on re-using the available equipment and staff when merging the pre-existing laboratories, has reached its goal: introducing automation while minimizing the costs. Significance for public health Automation is an emerging trend in modern clinical laboratories with a positive impact on service level to patients and on staff safety as shown by different studies. In fact, it allows process standardization which, in turn, decreases the frequency of outliers and errors. In addition, it induces faster processing times, thus improving the service level. On the other side, automation decreases the staff exposition to accidents strongly improving staff safety. In this study, we analyse a further potential benefit of automation, that is economic convenience. We study the case of the automated laboratory of one of the biggest hospital in Italy and compare the cost related to the pre and post automation situation. Introducing automation lead to a cost decrease without affecting the service level to patients. This was a key goal of the hospital which, as public health entities in general, is constantly struggling with budget constraints. PMID:28660178
Cost-effectiveness Analysis Appraisal and Application: An Emergency Medicine Perspective.
April, Michael D; Murray, Brian P
2017-06-01
Cost-effectiveness is an important goal for emergency care delivery. The many diagnostic, treatment, and disposition decisions made in the emergency department (ED) have a significant impact upon healthcare resource utilization. Cost-effectiveness analysis (CEA) is an analytic tool to optimize these resource allocation decisions through the systematic comparison of costs and effects of alternative healthcare decisions. Yet few emergency medicine leaders and policymakers have any formal training in CEA methodology. This paper provides an introduction to the interpretation and use of CEA with a focus on application to emergency medicine problems and settings. It applies a previously published CEA to the hypothetical case of a patient presenting to the ED with chest pain who requires risk stratification. This paper uses a widely cited checklist to appraise the CEA. This checklist serves as a vehicle for presenting basic CEA terminology and concepts. General topics of focus include measurement of costs and outcomes, incremental analysis, and sensitivity analysis. Integrated throughout the paper are recommendations for good CEA practice with emphasis on the guidelines published by the U.S. Panel on Cost-Effectiveness in Health and Medicine. Unique challenges for emergency medicine CEAs discussed include the projection of long-term outcomes from emergent interventions, costing ED services, and applying study results to diverse patient populations across various ED settings. The discussion also includes an overview of the limitations inherent in applying CEA results to clinical practice to include the lack of incorporation of noncost considerations in CEA (e.g., ethics). After reading this article, emergency medicine leaders and researchers will have an enhanced understanding of the basics of CEA critical appraisal and application. The paper concludes with an overview of economic evaluation resources for readers interested in conducting ED-based economic evaluation studies. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.
Chemical Laser Facility Study. Volume III. Cost Analysis.
Chemical Laser Test Facility. The design criteria for the architectural and engineering design of the facility are presented in Volume I and the design requirements for the Laser Test System are presented in Volume II.
Cost-of-illness studies in chronic ulcers: a systematic review.
Chan, B; Cadarette, S; Wodchis, W; Wong, J; Mittmann, N; Krahn, M
2017-04-01
To systematically review the published academic literature on the cost of chronic ulcers. A literature search was conducted in MEDLINE, EMBASE, HealthSTAR, Econlit and CINAHL up to 12 May 2016 to identify potential studies for review. Cost search terms were based on validated algorithms. Clinical search terms were based on recent Cochrane reviews of interventions for chronic ulcers. Titles and abstracts were screened by two reviewers to determine eligibility for full text review. Study characteristics were summarised. The quality of reporting was evaluated using a modified cost-of-illness checklist. Mean costs were adjusted and inflated to 2015 $US and presented for different durations and perspectives. Of 2267 studies identified, 36 were eligible and included in the systematic review. Most studies presented results from the health-care public payer or hospital perspective. Many studies included hospital costs in the analysis and only reported total costs without presenting condition-specific attributable costs. The mean cost of chronic ulcers ranged from $1000 per year for patient out of pocket costs to $30,000 per episode from the health-care public payer perspective. Mean one year cost from a health-care public payer perspective was $44,200 for diabetic foot ulcer (DFU), $15,400 for pressure ulcer (PU) and $11,000 for leg ulcer (LU). There was large variability in study methods, perspectives, cost components and jurisdictions, making interpretation of costs difficult. Nevertheless, it appears that the cost for the treatment of chronic ulcers is substantial and greater attention needs to be made for preventive measures.
Meijster, Tim; van Duuren-Stuurman, Birgit; Heederik, Dick; Houba, Remko; Koningsveld, Ernst; Warren, Nicholas; Tielemans, Erik
2011-10-01
Use of cost-benefit analysis in occupational health increases insight into the intervention strategy that maximises the cost-benefit ratio. This study presents a methodological framework identifying the most important elements of a cost-benefit analysis for occupational health settings. One of the main aims of the methodology is to evaluate cost-benefit ratios for different stakeholders (employers, employees and society). The developed methodology was applied to two intervention strategies focused on reducing respiratory diseases. A cost-benefit framework was developed and used to set up a calculation spreadsheet containing the inputs and algorithms required to calculate the costs and benefits for all cost elements. Inputs from a large variety of sources were used to calculate total costs, total benefits, net costs and the benefit-to-costs ratio for both intervention scenarios. Implementation of a covenant intervention program resulted in a net benefit of €16 848 546 over 20 years for a population of 10 000 workers. Implementation was cost-effective for all stakeholders. For a health surveillance scenario, total benefits resulting from a decreased disease burden were estimated to be €44 659 352. The costs of the interventions could not be calculated. This study provides important insights for developing effective intervention strategies in the field of occupational medicine. Use of a model based approach enables investigation of those parameters most likely to impact on the effectiveness and costs of interventions for work related diseases. Our case study highlights the importance of considering different perspectives (of employers, society and employees) in assessing and sharing the costs and benefits of interventions.
Hommer, A; Wickstrøm, J; Friis, M M; Steeds, C; Thygesen, J; Ferreras, A; Gouws, P; Buchholz, P
2008-04-01
To compare the efficacy and cost implications of the use of the intraocular pressure-lowering prostaglandin analogues bimatoprost, travoprost, and latanoprost as fixed-combination therapies with timolol, a beta-adrenergic receptor antagonist. A decision analytic cost-effectiveness model was constructed. Since no head-to-head studies comparing the three treatment options exist, the analysis was based on an indirect comparison. Hence, the model was based on efficacy data from five randomized, controlled, clinical studies. The studies were comparable with respect to study design, time horizon, patient population and type of end point presented. The measure of effectiveness was the percentage reduction of the intraocular pressure level from baseline. The cost evaluated was the cost of medication and clinical visits to the ophthalmologist. All drug costs were market prices inclusive of value-added tax, and visit costs were priced using official physician fees. Cost-effectiveness analyses were carried out in five European countries: Spain, Italy, United Kingdom, Norway and Sweden. The time horizon for the analyses was 3 months. The analysis showed that fixed-combination bimatoprost/timolol was more effective and less costly than fixed-combination travoprost/timolol and fixed-combination latanoprost/timolol in three out of the five countries analyzed. In two countries, bimatoprost/timolol was less costly than latanoprost/timolol, and cost the same as travoprost/timolol. This cost-effectiveness analysis showed that the fixed combination of bimatoprost 0.03%/timolol 0.5% administered once daily was a cost-effective treatment option for patients with primary open-angle glaucoma. This study was limited by available clinical data: without a head-to-head trial, indirect comparisons were necessary. In the United Kingdom, Sweden, Norway, Italy, and Spain, from a health service viewpoint, bimatoprost/timolol was a slightly more effective as well as less costly treatment strategy when compared to both travoprost/timolol and latanoprost/timolol.
Nicholson, A; Berger, K; Bohn, R; Carcao, M; Fischer, K; Gringeri, A; Hoots, K; Mantovani, L; Schramm, W; van Hout, B A; Willan, A R; Feldman, B M
2008-01-01
The need for clearly reported studies evaluating the cost of prophylaxis and its overall outcomes has been recommended from previous literature. To establish minimal ''core standards'' that can be followed when conducting and reporting economic evaluations of hemophilia prophylaxis. Ten members of the IPSG Economic Analysis Working Group participated in a consensus process using the Nominal Groups Technique (NGT). The following topics relating to the economic analysis of prophylaxis studies were addressed; Whose perspective should be taken? Which is the best methodological approach? Is micro- or macro-costing the best costing strategy? What information must be presented about costs and outcomes in order to facilitate local and international interpretation? The group suggests studies on the economic impact of prophylaxis should be viewed from a societal perspective and be reported using a Cost Utility Analysis (CUA) (with consideration of also reporting Cost Benefit Analysis [CBA]). All costs that exceed $500 should be used to measure the costs of prophylaxis (macro strategy) including items such as clotting factor costs, hospitalizations, surgical procedures, productivity loss and number of days lost from school or work. Generic and disease specific quality of lífe and utility measures should be used to report the outcomes of the study. The IPSG has suggested minimal core standards to be applied to the reporting of economic evaluations of hemophilia prophylaxis. Standardized reporting will facilitate the comparison of studies and will allow for more rational policy decisions and treatment choices.
An opportunity cost approach to sample size calculation in cost-effectiveness analysis.
Gafni, A; Walter, S D; Birch, S; Sendi, P
2008-01-01
The inclusion of economic evaluations as part of clinical trials has led to concerns about the adequacy of trial sample size to support such analysis. The analytical tool of cost-effectiveness analysis is the incremental cost-effectiveness ratio (ICER), which is compared with a threshold value (lambda) as a method to determine the efficiency of a health-care intervention. Accordingly, many of the methods suggested to calculating the sample size requirements for the economic component of clinical trials are based on the properties of the ICER. However, use of the ICER and a threshold value as a basis for determining efficiency has been shown to be inconsistent with the economic concept of opportunity cost. As a result, the validity of the ICER-based approaches to sample size calculations can be challenged. Alternative methods for determining improvements in efficiency have been presented in the literature that does not depend upon ICER values. In this paper, we develop an opportunity cost approach to calculating sample size for economic evaluations alongside clinical trials, and illustrate the approach using a numerical example. We compare the sample size requirement of the opportunity cost method with the ICER threshold method. In general, either method may yield the larger required sample size. However, the opportunity cost approach, although simple to use, has additional data requirements. We believe that the additional data requirements represent a small price to pay for being able to perform an analysis consistent with both concept of opportunity cost and the problem faced by decision makers. Copyright (c) 2007 John Wiley & Sons, Ltd.
The First NASA Advanced Composites Technology Conference, part 1
NASA Technical Reports Server (NTRS)
Davis, John G., Jr. (Compiler); Bohon, Herman L. (Compiler)
1991-01-01
Papers are presented from the conference. The ACT program is a multiyear research initiative to achieve a national goal of technology readiness before the end of the decade. Conference papers recorded results of research in the ACT program on new materials development and processing, innovative design concepts, analysis development and validation, cost effective manufacturing methodology, and cost tracking and prediction procedures. Papers presented on major applications programs approved by the Department of Defense are also included.
Risk-based economic decision analysis of remediation options at a PCE-contaminated site.
Lemming, Gitte; Friis-Hansen, Peter; Bjerg, Poul L
2010-05-01
Remediation methods for contaminated sites cover a wide range of technical solutions with different remedial efficiencies and costs. Additionally, they may vary in their secondary impacts on the environment i.e. the potential impacts generated due to emissions and resource use caused by the remediation activities. More attention is increasingly being given to these secondary environmental impacts when evaluating remediation options. This paper presents a methodology for an integrated economic decision analysis which combines assessments of remediation costs, health risk costs and potential environmental costs. The health risks costs are associated with the residual contamination left at the site and its migration to groundwater used for drinking water. A probabilistic exposure model using first- and second-order reliability methods (FORM/SORM) is used to estimate the contaminant concentrations at a downstream groundwater well. Potential environmental impacts on the local, regional and global scales due to the site remediation activities are evaluated using life cycle assessments (LCA). The potential impacts on health and environment are converted to monetary units using a simplified cost model. A case study based upon the developed methodology is presented in which the following remediation scenarios are analyzed and compared: (a) no action, (b) excavation and off-site treatment of soil, (c) soil vapor extraction and (d) thermally enhanced soil vapor extraction by electrical heating of the soil. Ultimately, the developed methodology facilitates societal cost estimations of remediation scenarios which can be used for internal ranking of the analyzed options. Despite the inherent uncertainties of placing a value on health and environmental impacts, the presented methodology is believed to be valuable in supporting decisions on remedial interventions. Copyright 2010 Elsevier Ltd. All rights reserved.
Life-Cycle-Cost Analysis of the Microwave Landing System Ground and Airborne Systems
1981-10-01
constant 1980 dollars, with a production rate variability. Table S-3 presents the life-cycle costs by MLS configuration and total system implementation... PRODUCTION RATE VARIABILITY OVER A THREE-YEAR PFODUCTXION RUN (MILLIONS OF CONSTANT 1980 DOLLARS) Pruduction (Juantitl•e and Costs system Typ 75...Implementation strategies * Production schedules for MLS equipment The LCC was determined to be relatively insensitive to changes in MTBF. This was expected
ERIC Educational Resources Information Center
Wendling, Wayne
This report is divided into four sections. Section 1 is a short discussion of the economic theory underlying the construction of the cost of education index and an example of how the index is calculated. Also presented are descriptions of the factors included in the statistical analysis to control for quality, quantity, and cost differences and…
An analysis of hydrogen production via closed-cycle schemes. [thermochemical processings from water
NASA Technical Reports Server (NTRS)
Chao, R. E.; Cox, K. E.
1975-01-01
A thermodynamic analysis and state-of-the-art review of three basic schemes for production of hydrogen from water: electrolysis, thermal water-splitting, and multi-step thermochemical closed cycles is presented. Criteria for work-saving thermochemical closed-cycle processes are established, and several schemes are reviewed in light of such criteria. An economic analysis is also presented in the context of energy costs.
Towards microalgal triglycerides in the commodity markets.
Benvenuti, Giulia; Ruiz, Jesús; Lamers, Packo P; Bosma, Rouke; Wijffels, René H; Barbosa, Maria J
2017-01-01
Microalgal triglycerides (TAGs) hold great promise as sustainable feedstock for commodity industries. However, to determine research priorities and support business decisions, solid techno-economic studies are essential. Here, we present a techno-economic analysis of two-step TAG production (growth reactors are operated in continuous mode such that multiple batch-operated stress reactors are inoculated and harvested sequentially) for a 100-ha plant in southern Spain using vertically stacked tubular photobioreactors. The base case is established with outdoor pilot-scale data and based on current process technology. For the base case, production costs of 6.7 € per kg of biomass containing 24% TAG (w/w) were found. Several scenarios with reduced production costs were then presented based on the latest biological and technological advances. For instance, much effort should focus on increasing the photosynthetic efficiency during the stress and growth phases, as this is the most influential parameter on production costs (30 and 14% cost reduction from base case). Next, biological and technological solutions should be implemented for a reduction in cooling requirements (10 and 4.5% cost reduction from base case when active cooling is avoided and cooling setpoint is increased, respectively). When implementing all the suggested improvements, production costs can be decreased to 3.3 € per kg of biomass containing 60% TAG (w/w) within the next 8 years. With our techno-economic analysis, we indicated a roadmap for a substantial cost reduction. However, microalgal TAGs are not yet cost efficient when compared to their present market value. Cost-competiveness strictly relies on the valorization of the whole biomass components and on cheaper PBR designs (e.g. plastic film flat panels). In particular, further research should focus on the development and commercialization of PBRs where active cooling is avoided and stable operating temperatures are maintained by the water basin in which the reactor is placed.
Cost of care of haemophilia with inhibitors.
Di Minno, M N D; Di Minno, G; Di Capua, M; Cerbone, A M; Coppola, A
2010-01-01
In Western countries, the treatment of patients with inhibitors is presently the most challenging and serious issue in haemophilia management, direct costs of clotting factor concentrates accounting for >98% of the highest economic burden absorbed for the healthcare of patients in this setting. Being designed to address questions of resource allocation and effectiveness, decision models are the golden standard to reliably assess the overall economic implications of haemophilia with inhibitors in terms of mortality, bleeding-related morbidity, and severity of arthropathy. However, presently, most data analyses stem from retrospective short-term evaluations, that only allow for the analysis of direct health costs. In the setting of chronic diseases, the cost-utility analysis, that takes into account the beneficial effects of a given treatment/healthcare intervention in terms of health-related quality of life, is likely to be the most appropriate approach. To calculate net benefits, the quality adjusted life year, that significantly reflects such health gain, has to be compared with specific economic impacts. Differences in data sources, in medical practice and/or in healthcare systems and costs, imply that most current pharmacoeconomic analyses are confined to a narrow healthcare payer perspective. Long-term/lifetime prospective or observational studies, devoted to a careful definition of when to start a treatment; of regimens (dose and type of product) to employ, and of inhibitor population (children/adults, low-responding/high responding inhibitors) to study, are thus urgently needed to allow for newer insights, based on reliable data sources into resource allocation, effectiveness and cost-utility analysis in the treatment of haemophiliacs with inhibitors.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Manibog, F.R.
1982-01-01
This study presents the methodology and results of: (1) a rural energy survey that was conducted in a Philippine island community; and (2) a cost-effectiveness analysis of selected conventional and renewable-energy technologies. The rural energy survey section compares different survey techniques and analyzes energy utilization by providing: (1) a breakdown of energy flows and use patterns; (2) information on energy prices, ownership patterns, social relations, and their effects in terms of differential access to energy sources; (3) per household and per capita consumption figures; and (4) a village energy-consumption table. Correlation analysis is used to determine if the stratified, independentmore » socio-economic variables are indicators for dependent energy variables. Results of the economic analysis indicate that renewable-energy technologies are already least-cost alternatives to diesel generation in the village case study. The sensitivity analysis also shows that these technologies remain the least-cost options even if their capital costs were underestimated. The findings of the study are useful to the current Philippine renewable-energy program in terms of providing: (1) information essential for determining end-users' priority energy needs and for improving technology choice and project design; and (2) justification for promoting auto-generation based on renewable energy sources as alternatives to diesel fuel.« less
Accounting for the cost of scaling-up health interventions.
Johns, Benjamin; Baltussen, Rob
2004-11-01
Recent studies such as the Commission on Macroeconomics and Health have highlighted the need for expanding the coverage of services for HIV/AIDS, malaria, tuberculosis, immunisations and other diseases. In order for policy makers to plan for these changes, they need to analyse the change in costs when interventions are 'scaled-up' to cover greater percentages of the population. Previous studies suggest that applying current unit costs to an entire population can misconstrue the true costs of an intervention. This study presents the methodology used in WHO-CHOICE's generalised cost effectiveness analysis, which includes non-linear cost functions for health centres, transportation and supervision costs, as well as the presence of fixed costs of establishing a health infrastructure. Results show changing marginal costs as predicted by economic theory. 2004 John Wiley & Sons, Ltd.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Taylor, T. Jr
Volume IV represents the results of one of four major study areas under the Automotive Manufacturing Assessment System (AMAS) sponsored by the DOT/Transportation Systems Center. AMAS was designed to assist in the evaluation of industry's capability to produce fuel efficient vehicles. An analysis of automotive engine manufacturing was conducted in order to determine the impact of regulatory changes on tooling costs and the production process. The 351W CID V-8 engine at Ford's Windsor No. 1 Plant was the subject of the analysis. A review of plant history and its product is presented along with an analysis of manufacturing operations, includingmore » material and production flow, plant layout, machining and assembly processes, tooling, supporting facilities, inspection, service and repair. Four levels of product change intensity showing the impact on manufacturing methods and cost is also presented.« less
Incorporating Experience Curves in Appliance Standards Analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery
2011-10-31
The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners,more » clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.« less
Study of Lyndon B. Johnson Space Center utility systems
NASA Technical Reports Server (NTRS)
Redding, T. E.; Huber, W. C.
1977-01-01
The results of an engineering study of potential energy saving utility system modifications for the NASA Lyndon B. Johnson Space Center are presented. The objective of the study was to define and analyze utility options that would provide facility energy savings in addition to the approximately 25 percent already achieved through an energy loads reduction program. A systems engineering approach was used to determine total system energy and cost savings resulting from each of the ten major options investigated. The results reported include detailed cost analyses and cost comparisons of various options. Cost are projected to the year 2000. Also included are a brief description of a mathematical model used for the analysis and the rationale used for a site survey to select buildings suitable for analysis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Al-Karaghouli, Ali; Kazmerski, L.L.
2010-04-15
This paper addresses the need for electricity of rural areas in southern Iraq and proposes a photovoltaic (PV) solar system to power a health clinic in that region. The total daily health clinic load is 31.6 kW h and detailed loads are listed. The National Renewable Energy Laboratory (NREL) optimization computer model for distributed power, ''HOMER,'' is used to estimate the system size and its life-cycle cost. The analysis shows that the optimal system's initial cost, net present cost, and electricity cost is US$ 50,700, US$ 60,375, and US$ 0.238/kW h, respectively. These values for the PV system are comparedmore » with those of a generator alone used to supply the load. We found that the initial cost, net present cost of the generator system, and electricity cost are US$ 4500, US$ 352,303, and US$ 1.332/kW h, respectively. We conclude that using the PV system is justified on humanitarian, technical, and economic grounds. (author)« less
Cost Models for MMC Manufacturing Processes
NASA Technical Reports Server (NTRS)
Elzey, Dana M.; Wadley, Haydn N. G.
1996-01-01
Processes for the manufacture of advanced metal matrix composites are rapidly approaching maturity in the research laboratory and there is growing interest in their transition to industrial production. However, research conducted to date has almost exclusively focused on overcoming the technical barriers to producing high-quality material and little attention has been given to the economical feasibility of these laboratory approaches and process cost issues. A quantitative cost modeling (QCM) approach was developed to address these issues. QCM are cost analysis tools based on predictive process models relating process conditions to the attributes of the final product. An important attribute, of the QCM approach is the ability to predict the sensitivity of material production costs to product quality and to quantitatively explore trade-offs between cost and quality. Applications of the cost models allow more efficient direction of future MMC process technology development and a more accurate assessment of MMC market potential. Cost models were developed for two state-of-the art metal matrix composite (MMC) manufacturing processes: tape casting and plasma spray deposition. Quality and Cost models are presented for both processes and the resulting predicted quality-cost curves are presented and discussed.
Space Operations Center system analysis study extension. Volume 2: Programmatics and cost
NASA Technical Reports Server (NTRS)
1982-01-01
A summary of Space Operations Center (SOC) orbital space station costs, program options and program recommendations is presented. Program structure, hardware commonality, schedules and program phasing are considered. Program options are analyzed with respect to mission needs, design and technology options, and anticipated funding constraints. Design and system options are discussed.
NASA Technical Reports Server (NTRS)
Yoo, H. I.
1978-01-01
Work is reported on: (1) slicing of the ingots with the multiblade slurry saw, the multiwire slurry saw and the I.D. saw, (2) characterization of the sliced wafers, and (3) analysis of add-on slicing cost based on Solar Array Manufacturing Industry Costing Standard.
NASA Technical Reports Server (NTRS)
1979-01-01
Cost scheduling and funding data are presented for the reference design of the power extension package. Major schedule milestones are correlated with current Spacelab flight dates. Funding distributions provide for minimum expenditure during the first year of the project.
The Influence of Management on the Cost of Fire Protection
ERIC Educational Resources Information Center
Donahue, Amy K.
2004-01-01
An important and unresolved issue central to the study of government performance is how the actions of managers and the nature of organizations affect the cost of public services. This paper presents an empirical analysis of fire departments that estimates the influence of managerial choices on per capita spending within a simultaneous public…
Study of selected tether applications in space, phase 3, volume 2
NASA Technical Reports Server (NTRS)
1986-01-01
The results of a Phase 3 study of two Selected Tether Applications in Space (STAIS); deorbit of a Shuttle and launch of an Orbital Transfer Vehicle (OTV), both from the space station using a tether were examined. The study objectives were to: perform a preliminary engineering design, define operational scenarios, develop a common cost model, perform cost benefits analyses, and develop a Work Breakdown Structure (WBS). Key features of the performance analysis were to identify the net increases in effective Shuttle cargo capability if tethers are used to assist in the deorbit of Shuttles and the launching of the OTVs from the space station and to define deployer system designs required to accomplish these tasks. Deployer concepts were designed and discussed. Operational scenarios, including timelines, for both tethered and nontethered Shuttle and OTV operations at the space station were evaluated. A summary discussion of the Selected Tether Applications Cost Model (STACOM) and the results of the cost benefits analysis are presented. Several critical technologies needed to implement tether assisted deployment of payloads are also discussed. Conclusions and recommendations are presented.
The Automated Array Assembly Task of the Low-cost Silicon Solar Array Project, Phase 2
NASA Technical Reports Server (NTRS)
Coleman, M. G.; Grenon, L.; Pastirik, E. M.; Pryor, R. A.; Sparks, T. G.
1978-01-01
An advanced process sequence for manufacturing high efficiency solar cells and modules in a cost-effective manner is discussed. Emphasis is on process simplicity and minimizing consumed materials. The process sequence incorporates texture etching, plasma processes for damage removal and patterning, ion implantation, low pressure silicon nitride deposition, and plated metal. A reliable module design is presented. Specific process step developments are given. A detailed cost analysis was performed to indicate future areas of fruitful cost reduction effort. Recommendations for advanced investigations are included.
Sensitivity analysis of add-on price estimate for select silicon wafering technologies
NASA Technical Reports Server (NTRS)
Mokashi, A. R.
1982-01-01
The cost of producing wafers from silicon ingots is a major component of the add-on price of silicon sheet. Economic analyses of the add-on price estimates and their sensitivity internal-diameter (ID) sawing, multiblade slurry (MBS) sawing and fixed-abrasive slicing technique (FAST) are presented. Interim price estimation guidelines (IPEG) are used for estimating a process add-on price. Sensitivity analysis of price is performed with respect to cost parameters such as equipment, space, direct labor, materials (blade life) and utilities, and the production parameters such as slicing rate, slices per centimeter and process yield, using a computer program specifically developed to do sensitivity analysis with IPEG. The results aid in identifying the important cost parameters and assist in deciding the direction of technology development efforts.
Exergy & economic analysis of biogas fueled solid oxide fuel cell systems
NASA Astrophysics Data System (ADS)
Siefert, Nicholas S.; Litster, Shawn
2014-12-01
We present an exergy and an economic analysis of a power plant that uses biogas produced from a thermophilic anaerobic digester (AD) to fuel a solid oxide fuel cell (SOFC). We performed a 4-variable parametric analysis of the AD-SOFC system in order to determine the optimal design operation conditions, depending on the objective function of interest. We present results on the exergy efficiency (%), power normalized capital cost ( kW-1), and the internal rate of return on investment, IRR, (% yr-1) as a function of the current density, the stack pressure, the fuel utilization, and the total air stoichiometric ratio. To the authors' knowledge, this is the first AD-SOFC paper to include the cost of the AD when conducting economic optimization of the AD-SOFC plant. Our calculations show that adding a new AD-SOFC system to an existing waste water treatment (WWT) plant could yield positives values of IRR at today's average electricity prices and could significantly out-compete other options for using biogas to generate electricity. AD-SOFC systems could likely convert WWT plants into net generators of electricity rather than net consumers of electricity while generating economically viable rates of return on investment if the costs of SOFC systems are within a factor of two of the DOE/SECA cost targets.
Cost-benefit analysis of passive fire protections in road LPG transportation.
Paltrinieri, Nicola; Bonvicini, Sarah; Spadoni, Gigliola; Cozzani, Valerio
2012-02-01
The cost-benefit evaluation of passive fire protection adoption in the road transport of liquefied petroleum gas (LPG) was investigated. In a previous study, mathematical simulations of real scale fire scenarios proved the effectiveness of passive fire protections in preventing the "fired" boiling liquid expanding vapor explosion (BLEVE), thus providing a significant risk reduction. In the present study the economical aspects of the adoption of fire protections are analyzed and an approach to cost-benefit analysis (CBA) is proposed. The CBA model is based on the comparison of the risk reduction due to fire protections (expressed in monetary terms by the value of a statistical life) and the cost of the application of fire protections to a fleet of tankers. Different types of fire protections were considered, as well as the possibility to apply protections to the entire fleet or only to a part of it. The application of the proposed model to a real-life case study is presented and discussed. Results demonstrate that the adoption of passive fire protections on road tankers, though not compulsory in Europe, can be economically feasible, thus representing a concrete measure to achieve control of the "major hazard accidents" cited by the European legislation. © 2011 Society for Risk Analysis.
2014-01-01
Background To achieve globally or regionally defined accelerated disease control, elimination and eradication (ADC/E/E) goals against vaccine-preventable diseases requires complementing national routine immunization programs with intensive, time-limited, and targeted Supplementary Immunization Activities (SIAs). Many global and country-level SIA costing efforts have historically relied on what are now outdated benchmark figures. Mobilizing adequate resources for successful implementation of SIAs requires updated estimates of non-vaccine costs per target population. Methods This assessment updates the evidence base on the SIA operational costs through a review of literature between 1992 and 2012, and an analysis of actual expenditures from 142 SIAs conducted between 2004 and 2011 and documented in country immunization plans. These are complemented with an analysis of budgets from 31 SIAs conducted between 2006 and 2011 in order to assess the proportion of total SIA costs per person associated with various cost components. All results are presented in 2010 US dollars. Results Existing evidence indicate that average SIA operational costs were usually less than US$0.50 per person in 2010 dollars. However, the evidence is sparse, non-standardized, and largely out of date. Average operational costs per person generated from our analysis of country immunization plans are consistently higher than published estimates, approaching US$1.00 for injectable vaccines. The results illustrate that the benchmarks often used to project needs underestimate the true costs of SIAs and the analysis suggests that SIA operational costs have been increasing over time in real terms. Our assessment also illustrates that operational costs vary across several dimensions. Variations in the actual costs of SIAs likely to reflect the extents to which economies of scale associated with campaign-based delivery can be attained, the underlying strength of the immunization program, sensitivities to the relative ease of vaccine administration (i.e. orally, or by injection), and differences in disease-specific programmatic approaches. The assessment of SIA budgets by cost component illustrates that four cost drivers make up the largest proportion of costs across all vaccines: human resources, program management, social mobilization, and vehicles and transportation. These findings suggest that SIAs leverage existing health system infrastructure, reinforcing the fact that strong routine immunization programs are an important pre-requisite for achieving ADC/E/E goals. Conclusions The results presented here will be useful for national and global-level actors involved in planning, budgeting, resource mobilization, and financing of SIAs in order to create more realistic assessments of resource requirements for both existing ADC/E/E efforts as well as for new vaccines that may deploy a catch-up campaign-based delivery component. However, limitations of our analysis suggest a need to conduct further research into operational costs of SIAs. Understanding the changing face of delivery costs and cost structures for SIAs will continue to be critical to avoid funding gaps and in order to improve vaccination coverage, reduce health inequities, and achieve the ADC/E/E goals many of which have been endorsed by the World Health Assembly and are included in the Decade of Vaccines Global Vaccine Action Plan. PMID:24450832
Gandhi, Gian; Lydon, Patrick
2014-01-22
To achieve globally or regionally defined accelerated disease control, elimination and eradication (ADC/E/E) goals against vaccine-preventable diseases requires complementing national routine immunization programs with intensive, time-limited, and targeted Supplementary Immunization Activities (SIAs). Many global and country-level SIA costing efforts have historically relied on what are now outdated benchmark figures. Mobilizing adequate resources for successful implementation of SIAs requires updated estimates of non-vaccine costs per target population. This assessment updates the evidence base on the SIA operational costs through a review of literature between 1992 and 2012, and an analysis of actual expenditures from 142 SIAs conducted between 2004 and 2011 and documented in country immunization plans. These are complemented with an analysis of budgets from 31 SIAs conducted between 2006 and 2011 in order to assess the proportion of total SIA costs per person associated with various cost components. All results are presented in 2010 US dollars. Existing evidence indicate that average SIA operational costs were usually less than US$0.50 per person in 2010 dollars. However, the evidence is sparse, non-standardized, and largely out of date. Average operational costs per person generated from our analysis of country immunization plans are consistently higher than published estimates, approaching US$1.00 for injectable vaccines. The results illustrate that the benchmarks often used to project needs underestimate the true costs of SIAs and the analysis suggests that SIA operational costs have been increasing over time in real terms. Our assessment also illustrates that operational costs vary across several dimensions. Variations in the actual costs of SIAs likely to reflect the extents to which economies of scale associated with campaign-based delivery can be attained, the underlying strength of the immunization program, sensitivities to the relative ease of vaccine administration (i.e. orally, or by injection), and differences in disease-specific programmatic approaches. The assessment of SIA budgets by cost component illustrates that four cost drivers make up the largest proportion of costs across all vaccines: human resources, program management, social mobilization, and vehicles and transportation. These findings suggest that SIAs leverage existing health system infrastructure, reinforcing the fact that strong routine immunization programs are an important pre-requisite for achieving ADC/E/E goals. The results presented here will be useful for national and global-level actors involved in planning, budgeting, resource mobilization, and financing of SIAs in order to create more realistic assessments of resource requirements for both existing ADC/E/E efforts as well as for new vaccines that may deploy a catch-up campaign-based delivery component. However, limitations of our analysis suggest a need to conduct further research into operational costs of SIAs. Understanding the changing face of delivery costs and cost structures for SIAs will continue to be critical to avoid funding gaps and in order to improve vaccination coverage, reduce health inequities, and achieve the ADC/E/E goals many of which have been endorsed by the World Health Assembly and are included in the Decade of Vaccines Global Vaccine Action Plan.
Donovan, Peter J; McLeod, Donald S A; Little, Richard; Gordon, Louisa
2016-12-01
Little data is in existence about the most cost-effective primary treatment for Graves' disease. We performed a cost-utility analysis comparing radioactive iodine (RAI), anti-thyroid drugs (ATD) and total thyroidectomy (TT) as first-line therapy for Graves' disease in England and Australia. We used a Markov model to compare lifetime costs and benefits (quality-adjusted life-years (QALYs)). The model included efficacy, rates of relapse and major complications associated with each treatment, and alternative second-line therapies. Model parameters were obtained from published literature. One-way sensitivity analyses were conducted. Costs were presented in 2015£ or Australian Dollars (AUD). RAI was the least expensive therapy in both England (£5425; QALYs 34.73) and Australia (AUD5601; 30.97 QALYs). In base case results, in both countries, ATD was a cost-effective alternative to RAI (£16 866; 35.17 QALYs; incremental cost-effectiveness ratio (ICER) £26 279 per QALY gained England; AUD8924; 31.37 QALYs; ICER AUD9687 per QALY gained Australia), while RAI dominated TT (£7115; QALYs 33.93 England; AUD15 668; 30.25 QALYs Australia). In sensitivity analysis, base case results were stable to changes in most cost, transition probabilities and health-relative quality-of-life (HRQoL) weights; however, in England, the results were sensitive to changes in the HRQoL weights of hypothyroidism and euthyroidism on ATD. In this analysis, RAI is the least expensive choice for first-line treatment strategy for Graves' disease. In England and Australia, ATD is likely to be a cost-effective alternative, while TT is unlikely to be cost-effective. Further research into HRQoL in Graves' disease could improve the quality of future studies. © 2016 European Society of Endocrinology.
Analysis of digester design concepts
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ashare, E.; Wilson, E. H.
1979-01-29
Engineering economic analyses were performed on various digester design concepts to determine the relative performance for various biomass feedstocks. A comprehensive literature survey describing the state-of-the-art of the various digestion designs is included. The digester designs included in the analyses are CSTR, plug flow, batch, CSTR in series, multi-stage digestion and biomethanation. Other process options investigated included pretreatment processes such as shredding, degritting, and chemical pretreatment, and post-digestion processes, such as dewatering and gas purification. The biomass sources considered include feedlot manure, rice straw, and bagasse. The results of the analysis indicate that the most economical (on a unit gasmore » cost basis) digester design concept is the plug flow reactor. This conclusion results from this system providing a high gas production rate combined with a low capital hole-in-the-ground digester design concept. The costs determined in this analysis do not include any credits or penalties for feedstock or by-products, but present the costs only for conversion of biomass to methane. The batch land-fill type digester design was shown to have a unit gas cost comparable to that for a conventional stirred tank digester, with the potential of reducing the cost if a land-fill site were available for a lower cost per unit volume. The use of chemical pretreatment resulted in a higher unit gas cost, primarily due to the cost of pretreatment chemical. A sensitivity analysis indicated that the use of chemical pretreatment could improve the economics provided a process could be developed which utilized either less pretreatment chemical or a less costly chemical. The use of other process options resulted in higher unit gas costs. These options should only be used when necessary for proper process performance, or to result in production of a valuable by-product.« less
Affordability and cost-effectiveness: decision-making on the cost-effectiveness plane.
Sendi, P P; Briggs, A H
2001-10-01
Much recent research interest has focused on handling uncertainty in cost-effectiveness analysis and in particular the calculation of confidence intervals for incremental cost-effectiveness ratios (ICERs). Problems of interpretation when ICERs are negative have led to two important and related developments: the use of the net-benefit statistic and the presentation of uncertainty in cost-effectiveness analysis using acceptability curves. However, neither of these developments directly addresses the problem that decision-makers are constrained by a fixed-budget and may not be able to fund new, more expensive interventions, even if they have been shown to represent good value for money. In response to this limitation, the authors introduce the 'affordability curve' which reflects the probability that a programme is affordable for a wide range of threshold budgets. The authors argue that the joint probability an intervention is affordable and cost-effective is more useful for decision-making since it captures both dimensions of the decision problem faced by those responsible for health service budgets. Copyright 2001 John Wiley & Sons, Ltd.
NASA Astrophysics Data System (ADS)
Choi, Wongyu; Pate, Michael B.; Warren, Ryan D.; Nelson, Ron M.
2018-05-01
This paper presents an economic analysis of stationary and dual-axis tracking photovoltaic (PV) systems installed in the US Upper Midwest in terms of life-cycle costs, payback period, internal rate of return, and the incremental cost of solar energy. The first-year performance and energy savings were experimentally found along with documented initial cost. Future PV performance, savings, and operating and maintenance costs were estimated over 25-year assumed life. Under the given assumptions and discount rates, the life-cycle savings were found to be negative. Neither system was found to have payback periods less than the assumed system life. The lifetime average incremental costs of energy generated by the stationary and dual-axis tracking systems were estimated to be 0.31 and 0.37 per kWh generated, respectively. Economic analyses of different scenarios, each having a unique set of assumptions for costs and metering, showed a potential for economic feasibility under certain conditions when compared to alternative investments with assumed yields.
Miller, Heidi J; Neupane, Ruel; Fayezizadeh, Mojtaba; Majumder, Arnab; Marks, Jeffrey M
2017-04-01
Achalasia is a rare motility disorder of the esophagus. Treatment is palliative with the goal of symptom remission and slowing the progression of the disease. Treatment options include per oral endoscopic myotomy (POEM), laparoscopic Heller myotomy (LM) and endoscopic treatments such as pneumatic dilation (PD) and botulinum toxin type A injections (BI). We evaluate the economics and cost-effectiveness of treating achalasia. We performed cost analysis for POEM, LM, PD and BI at our institution from 2011 to 2015. Cost of LM was set to 1, and other procedures are presented as percentage change. Cost-effectiveness was calculated based on cost, number of interventions required for optimal results for dilations and injections and efficacy reported in the current literature. Incremental cost-effectiveness ratio was calculated by a cost-utility analysis using quality-adjusted life year gained, defined as a symptom-free year in a patient with achalasia. Average number of interventions required was 2.3 dilations or two injections for efficacies of 80 and 61 %, respectively. POEM cost 1.058 times the cost of LM, and PD and BI cost 0.559 and 0.448 times the cost of LM. Annual cost per cure over a period of 4 years for POEM, and LM were consistently equivalent, trending the same as PD although this has a lower initial cost. The cost per cure of BI remains stable over 3 years and then doubles. The cost-effectiveness of POEM and LM is equivalent. Myotomy, either surgical or endoscopic, is more cost-effective than BI due to high failure rates of the economical intervention. When treatment is being considered BI should be utilized in patients with less than 2-year life expectancy. Pneumatic dilations are cost-effective and are an acceptable approach to treatment of achalasia, although myotomy has a lower relapse rate and is cost-effective compared to PD after 2 years.
NECAP 4.1: NASA's energy-cost analysis program user's manual
NASA Technical Reports Server (NTRS)
Jensen, R. N.; Henninger, R. H.; Miner, D. L.
1983-01-01
The Enery Cost Analysis Program (NECAP) is a powerful computerized method to determine and to minimize building energy consumption. The program calculates hourly heat gain or losses taking into account the building thermal resistance and mass, using hourly weather and a "response factor' method. Internal temperatures are allowed to vary in accordance with thermostat settings and equipment capacity. A simplified input procedure and numerous other technical improvements are presented. This Users Manual describes the program and provides examples.
ERIC Educational Resources Information Center
Stromsdorfer, Ernst W.; Moayed-Dadkhah, Kamran
Presenting a cost-benefit analysis of the Mountain-Plains Career Education Program (a family based program for the economically deprived in the mountain plains states operating out of Glasgow Air Force Base in Montana) and the methodological basis for a full and more detailed study, this evaluation includes: (1) discussion of theoretical issues…
van Bakelen, N. B.; Vermeulen, K. M.; Buijs, G. J.; Jansma, J.; de Visscher, J. G. A. M.; Hoppenreijs, Th. J. M.; Bergsma, J. E.; Stegenga, B.; Bos, R. R. M.
2015-01-01
Background Biodegradable fixation systems could reduce/delete the problems associated with titanium plate removal. This means less surgical discomfort, and a reduction in costs. Aim The aim of the present study was to compare the cost-effectiveness between a biodegradable and a titanium system in Maxillofacial surgery. Materials and Methods This multicenter RCT was performed in the Netherlands from December 2006 to July 2009. Included were 230 patients who underwent a bilateral sagittal split osteotomy (BSSO), a Le Fort-I osteotomy, or a bi-maxillary osteotomy and those treated for fractures of the mandible, maxilla, or zygoma. The patients were randomly assigned to a titanium group (KLS Martin) or to a biodegradable group (Inion CPS). Costs were assessed from a societal perspective. Health outcomes in the incremental cost-effectiveness ratio (ICER) were bone healing (8 weeks) and plate removal (2 years). Results In 25 out of the 117 patients who were randomized to the biodegradable group, the maxillofacial surgeon made the decision to switch to the titanium system intra-operatively. This resulted in an Intention-To-Treat (ITT-)analysis and a Treatment-Received (TR-) analysis. Both analyses indicated that operations performed with titanium plates and screws had better health outcomes. In the TR-analysis the costs were lower in the biodegradable group, in the ITT-analysis costs were lower in the titanium group. Conclusion and Discussion The difference in costs between the ITT and the TR analyses can be explained by the intra-operative switches: In the TR-analysis the switches were analysed in the titanium group. In the ITT-analysis they were analysed in the biodegradable group. Considering the cost-effectiveness the titanium system is preferable to the biodegradable system in the regular treatment spectrum of mandibular, Le Fort-I, and zygomatic fractures, and BSSO’s, Le Fort-I osteotomies and bimaxillary osteotomies. Trial Registration Controlled-Trials.com ISRCTN 44212338 PMID:26192813
Feasibility of Federal assistance for urban mass transportation operating costs
DOT National Transportation Integrated Search
1971-11-01
The contents of the report include the present financial and operating condition of urban mass transportation; the present financial assistance programs for urban mass transportation; an analysis of alternative federal assistance programs; and the se...
Finite element analysis of helicopter structures
NASA Technical Reports Server (NTRS)
Rich, M. J.
1978-01-01
Application of the finite element analysis is now being expanded to three dimensional analysis of mechanical components. Examples are presented for airframe, mechanical components, and composite structure calculations. Data are detailed on the increase of model size, computer usage, and the effect on reducing stress analysis costs. Future applications for use of finite element analysis for helicopter structures are projected.
NASA Astrophysics Data System (ADS)
Rhodes, Russel E.; Byrd, Raymond J.
1998-01-01
This paper presents a ``back of the envelope'' technique for fast, timely, on-the-spot, assessment of affordability (profitability) of commercial space transportation architectural concepts. The tool presented here is not intended to replace conventional, detailed costing methodology. The process described enables ``quick look'' estimations and assumptions to effectively determine whether an initial concept (with its attendant cost estimating line items) provides focus for major leapfrog improvement. The Cost Charts Users Guide provides a generic sample tutorial, building an approximate understanding of the basic launch system cost factors and their representative magnitudes. This process will enable the user to develop a net ``cost (and price) per payload-mass unit to orbit'' incorporating a variety of significant cost drivers, supplemental to basic vehicle cost estimates. If acquisition cost and recurring cost factors (as a function of cost per payload-mass unit to orbit) do not meet the predetermined system-profitability goal, the concept in question will be clearly seen as non-competitive. Multiple analytical approaches, and applications of a variety of interrelated assumptions, can be examined in a quick, (on-the-spot) cost approximation analysis as this tool has inherent flexibility. The technique will allow determination of concept conformance to system objectives.
Health care utilization and costs for diseases of the circulatory system in a corporate setting.
Tsai, S P; Bernacki, E J; Reedy, S M; Miller, K E
1988-01-01
This article presents the health care utilization and costs for diseases of the circulatory system among 14,162 employees and their spouses based on medical insurance claims data analysis. Diseases of the circulatory system ranked first among insurance claims and costs accounting for 23% ($4.6 million) of the plan's total health care costs ($19.7 million) for the 1984 policy year. Overall, 57% of these expenditures were for hospital care, the proportion for hospital costs being as high as 64% for heart diseases and as low as 20% for hypertension. Male employees had higher utilization for both in-hospital and out-patient services than females. Utilization rates and costs dramatically increased for individuals 50 years or older. Costs for surgical and diagnostic procedures amounted to 8% of the total costs of circulatory system disorders. This article provides an example of the utility of claims analysis for morbidity surveillance. The analyses and parameters measured herein can be viewed as prerequisites to the development of health care management and health promotion strategies aimed at reducing health care cost for diseases of the circulatory system in a corporate setting.
2012-01-01
Purpose A key challenge for providers and commissioners of rehabilitation services is to find optimal balance between service costs and outcomes. This article presents a “real-lifeâ application of the UK Rehabilitation Outcomes Collaborative (UKROC) dataset. We undertook a comparative cohort analysis of case-episode data (n = 173) from two specialist neurological rehabilitation units (A and B), to compare the cost-efficiency of two service models. Key messages (i) Demographics, casemix and levels of functional dependency on admission and discharge were broadly similar for the two units. (ii) The mean length of stay for Unit A was 1.5 times longer than Unit B, which had 85% higher levels of therapy staffing in relation to occupied bed days so despite higher bed-day costs, Unit B was 20% more cost-efficient overall, for similar gain. (iii) Following analysis, engagement with service commissioners led to successful negotiation of a business plan for service reconfiguration with increased staffing levels for Unit A and further development of local community rehabilitation services. Conclusion (i) Lower front-end service costs do not always signify optimal cost-efficiency. (ii) Analysis of routinely collected clinical data can be used to engage commissioners and to make the case for resources to maximise efficiency and improve patient care. PMID:22506504
Turner-Stokes, Lynne; Poppleton, Rob; Williams, Heather; Schoewenaars, Katie; Badwan, Derar
2012-01-01
A key challenge for providers and commissioners of rehabilitation services is to find optimal balance between service costs and outcomes. This article presents a "real-life" application of the UK Rehabilitation Outcomes Collaborative (UKROC) dataset. We undertook a comparative cohort analysis of case-episode data (n = 173) from two specialist neurological rehabilitation units (A and B), to compare the cost-efficiency of two service models. (i) Demographics, casemix and levels of functional dependency on admission and discharge were broadly similar for the two units. (ii) The mean length of stay for Unit A was 1.5 times longer than Unit B, which had 85% higher levels of therapy staffing in relation to occupied bed days so despite higher bed-day costs, Unit B was 20% more cost-efficient overall, for similar gain. (iii) Following analysis, engagement with service commissioners led to successful negotiation of a business plan for service reconfiguration with increased staffing levels for Unit A and further development of local community rehabilitation services. (i) Lower front-end service costs do not always signify optimal cost-efficiency. (ii) Analysis of routinely collected clinical data can be used to engage commissioners and to make the case for resources to maximise efficiency and improve patient care.
Ramani, Enusa; Wee, Hyeseung; Kim, Jerome H.
2016-01-01
Background Use of the oral cholera vaccine (OCV) is a vital short-term strategy to control cholera in endemic areas with poor water and sanitation infrastructure. Identifying, estimating, and categorizing the delivery costs of OCV campaigns are useful in analyzing cost-effectiveness, understanding vaccine affordability, and in planning and decision making by program managers and policy makers. Objectives To review and re-estimate oral cholera vaccination program costs and propose a new standardized categorization that can help in collation, analysis, and comparison of delivery costs across countries. Data sources Peer reviewed publications listed in PubMed database, Google Scholar and World Health Organization (WHO) websites and unpublished data from organizations involved in oral cholera vaccination. Study eligibility criteria The publications and reports containing oral cholera vaccination delivery costs, conducted in low- and middle-income countries based on World Bank Classification. Limits are humans and publication date before December 31st, 2014. Participants No participants are involved, only costs are collected. Intervention Oral cholera vaccination and cost estimation. Study appraisal and synthesis method A systematic review was conducted using pre-defined inclusion and exclusion criteria. Cost items were categorized into four main cost groups: vaccination program preparation, vaccine administration, adverse events following immunization and vaccine procurement; the first three groups constituting the vaccine delivery costs. The costs were re-estimated in 2014 US dollars (US$) and in international dollar (I$). Results Ten studies were identified and included in the analysis. The vaccine delivery costs ranged from US$0.36 to US$ 6.32 (in US$2014) which was equivalent to I$ 0.99 to I$ 16.81 (in I$2014). The vaccine procurement costs ranged from US$ 0.29 to US$ 29.70 (in US$2014), which was equivalent to I$ 0.72 to I$ 78.96 (in I$2014). The delivery costs in routine immunization systems were lowest from US$ 0.36 (in US$2014) equivalent to I$ 0.99 (in I$2014). Limitations The reported cost categories are not standardized at collection point and may lead to misclassification. Costs for some OCV campaigns are not available and analysis does not include direct and indirect costs to vaccine recipients. Conclusions and implications of key findings Vaccine delivery cost estimation is needed for budgeting and economic analysis of vaccination programs. The cost categorization methodology presented in this study is helpful in collecting OCV delivery costs in a standardized manner, comparing delivery costs, planning vaccination campaigns and informing decision-making. PMID:27930668
NASA Technical Reports Server (NTRS)
Ohkubo, K.; Han, C. C.; Albernaz, J.; Janky, J. M.; Lusignan, B. B.
1972-01-01
The technical and economical feasibility of using the 12 GHz band for broadcasting from satellites were examined. Among the assigned frequency bands for broadcast satellites, the 12 GHz band system offers the most channels. It also has the least interference on and from the terrestrial communication links. The system design and analysis are carried out on the basis of a decision analysis model. Technical difficulties in achieving low-cost 12 GHz ground receivers are solved by making use of a die cast aluminum packaging, a hybrid integrated circuit mixer, a cavity stabilized Gunn oscillator and other state-of-the-art microwave technologies for the receiver front-end. A working model was designed and tested, which used frequency modulation. A final design for the 2.6 GHz system ground receiver is also presented. The cost of the ground-terminal was analyzed and minimized for a given figure-of-merit (a ratio of receiving antenna gain to receiver system noise temperature). The results were used to analyze the performance and cost of the whole satellite system.
A process economic assessment of hydrocarbon biofuels production using chemoautotrophic organisms
DOE Office of Scientific and Technical Information (OSTI.GOV)
Khan, NE; Myers, JA; Tuerk, AL
Economic analysis of an ARPA-e Electrofuels (http://arpa-e.energy.gov/?q=arpa-e-programs/electrofuels) process is presented, utilizing metabolically engineered Rhodobacter capsulatus or Ralstonia eutropha to produce the C30+ hydrocarbon fuel, botryococcene, from hydrogen, carbon dioxide, and oxygen. The analysis is based on an Aspen plus (R) bioreactor model taking into account experimentally determined Rba. capsulatus and Rls. eutropha growth and maintenance requirements, reactor residence time, correlations for gas-liquid mass-transfer coefficient, gas composition, and specific cellular fuel productivity. Based on reactor simulation results encompassing technically relevant parameter ranges, the capital and operating costs of the process were estimated for 5000 bbl-fuel/day plant and used to predict fuelmore » cost. Under the assumptions used in this analysis and crude oil prices, the Levelized Cost of Electricity (LCOE) required for economic feasibility must be less than 2(sic)/kWh. While not feasible under current market prices and costs, this work identifies key variables impacting process cost and discusses potential alternative paths toward economic feasibility. (C) 2014 Elsevier Ltd. All rights reserved.« less
NASA Astrophysics Data System (ADS)
Tohidnia, S.; Tohidi, G.
2018-02-01
The current paper develops three different ways to measure the multi-period global cost efficiency for homogeneous networks of processes when the prices of exogenous inputs are known at all time periods. A multi-period network data envelopment analysis model is presented to measure the minimum cost of the network system based on the global production possibility set. We show that there is a relationship between the multi-period global cost efficiency of network system and its subsystems, and also its processes. The proposed model is applied to compute the global cost Malmquist productivity index for measuring the productivity changes of network system and each of its process between two time periods. This index is circular. Furthermore, we show that the productivity changes of network system can be defined as a weighted average of the process productivity changes. Finally, a numerical example will be presented to illustrate the proposed approach.
Procedural-support music therapy in the healthcare setting: a cost-effectiveness analysis.
DeLoach Walworth, Darcy
2005-08-01
This comparative analysis examined the cost-effectiveness of music therapy as a procedural support in the pediatric healthcare setting. Many healthcare organizations are actively attempting to reduce the amount of sedation for pediatric patients undergoing various procedures. Patients receiving music therapy-assisted computerized tomography scans ( n = 57), echocardiograms ( n = 92), and other procedures ( n = 17) were included in the analysis. Results of music therapy-assisted procedures indicate successful elimination of patient sedation, reduction in procedural times, and decrease in the number of staff members present for procedures. Implications for nurses and music therapists in the healthcare setting are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-02-05
This decision document presents the selected removal action for the Installation Restoration Program (IRP) site ST005, otherwise known as the POL Tank Farm, at Galena Airport, Alaska. This decision is based on the administrative record for this site, specifically the draft Remedial Investigation Report (March 1995) and the Treatability Study Report (January 1995) (PB95-225314). The information from these documents is summarized, along with an analysis of potential removal action alternatives in the Engineering Evaluation/Cost Analysis (EE/CA).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rea, Jonathan E.; Oshman, Christopher J.; Olsen, Michele L.
In this paper, we present performance simulations and techno-economic analysis of a modular dispatchable solar power tower. Using a heliostat field and power block three orders of magnitude smaller than conventional solar power towers, our unique configuration locates thermal storage and a power block directly on a tower receiver. To make the system dispatchable, a valved thermosyphon controls heat flow from a latent heat thermal storage tank to a Stirling engine. The modular design results in minimal balance of system costs and enables high deployment rates with a rapid realization of economies of scale. In this new analysis, we combinemore » performance simulations with techno-economic analysis to evaluate levelized cost of electricity, and find that the system has potential for cost-competitiveness with natural gas peaking plants and alternative dispatchable renewables.« less
Clinical and health care aspects of respiratory tract disorders in Poland.
Kanecki, Krzysztof; Zycinska, Katarzyna; Tyszko, Piotr
2016-01-01
Respiratory diseases constitute a public health priority worldwide. This is related to the increasing exposure to microorganisms, toxic factors, allergens, drugs and smoking, as the most important factors. Increasing costs of health promotion, prevention, diagnosis and treatment of respiratory tract diseases forces the search for effective strategies in the reduction of costs without making a significant impact of these activities on health results. Chronic obstructive pulmonary disease (COPD) is an example of these diseases with increasing incidence, which has few known modifiable factors and absorbs large medical and social costs. The aim of this study is to present the conception of cost driver analysis that could be useful in constructing a good combination of the EBM-based treatment with cost reduction decisions. Analysis of cost drivers was based on the Global Initiative for Chronic Obstructive Lung Disease (GOLD) guidelines and Polish recommendations of COPD diagnosis and treatment. The proposition of cost reduction strategy in COPD treatment was based on identification of cost drivers in value chain conception. An increasing incidence and treatment costs of COPD force the search for methods of costs reduction in health care. Identifying, evaluating and modifying the cost drivers with use of the value chain conception could be an effective method in achieving these objectives.
Wu, Bin; Ye, Ming; Chen, Huafeng; Shen, Jinfang F
2012-02-01
Adding trastuzumab to a conventional regimen of chemotherapy can improve survival in patients with human epidermal growth factor receptor 2 (HER2)-positive advanced gastric or gastroesophageal junction (GEJ) cancer, but the economic impact of this practice is unknown. The purpose of this cost-effectiveness analysis was to estimate the effects of adding trastuzumab to standard chemotherapy in patients with HER2-positive advanced gastric or GEJ cancer on health and economic outcomes in China. A Markov model was developed to simulate the clinical course of typical patients with HER2-positive advanced gastric or GEJ cancer. Five-year quality-adjusted life-years (QALYs), costs, and incremental cost-effectiveness ratios (ICERs) were estimated. Model inputs were derived from the published literature and government sources. Direct costs were estimated from the perspective of Chinese society. One-way and probabilistic sensitivity analyses were conducted. On baseline analysis, the addition of trastuzumab increased cost and QALY by $56,004.30 (year-2010 US $) and 0.18, respectively, relative to conventional chemotherapy, resulting in an ICER of $251,667.10/QALY gained. Probabilistic sensitivity analyses supported that the addition of trastuzumab was not cost-effective. Budgetary impact analysis estimated that the annual increase in fiscal expenditures would be ~$1 billion. On univariate sensitivity analysis, the median overall survival time for conventional chemotherapy was the most influential factor with respect to the robustness of the model. The findings from the present analysis suggest that the addition of trastuzumab to conventional chemotherapy might not be cost-effective in patients with HER2-positive advanced gastric or GEJ cancer. Copyright © 2012 Elsevier HS Journals, Inc. All rights reserved.
Ter Wee, Marieke M; Coupé, Veerle Mh; den Uyl, Debby; Blomjous, Birgit S; Kooijmans, Esmee; Kerstens, Pit Jsm; Nurmohamed, Mike T; van Schaardenburg, Dirkjan; Voskuyl, Alexandre E; Boers, Maarten; Lems, Willem F
2017-01-01
To evaluate if COmbinatie therapie Bij Reumatoïde Artritis (COBRA)-light therapy is cost-effective in treating patients with early rheumatoid arthritis (RA) compared with COBRA therapy. This economic evaluation was performed next to the open-label, randomised non-inferiority COBRA-light trial in 164 patients with early RA. Non-responders to COBRA or COBRA-light received etanercept (50 mg/week) for 3-6 months. The societal perspective analysis took medical direct, non-medical direct and indirect costs into account. Costs were measured with patient cost diaries for the follow-up period of 52 weeks. Bootstrapping techniques estimated uncertainty around the cost-effectiveness ratios, presented in cost-effectiveness planes. 164 patients were randomised to either COBRA or COBRA-light strategy. At week 52, COBRA-light proved to be non-inferior to COBRA therapy on all clinical outcome measures. The results of the base-case cost-utility analysis (intention-to-treat analyses) revealed that COBRA-light strategy is more expensive (k€9.3 (SD 0.9) compared with COBRA (k€7.2 (SD 0.8)), but the difference in costs were not significant (k€2.0; 95% CI -0.3 to 4.4). Also, both strategies produced similar quality-adjusted life-years (QALYs). The sensitivity analyses showed robustness of these results. In a per-protocol sensitivity analysis, in which costs of etanercept were assumed to be provided as prescribed according to protocol, both arms had much higher costs: COBRA-light: k€11.5 (8.3) compared with k€8.5 (6.8) for COBRA, and the difference in costs was significant (k€2.9; 0.6 to 5.3). In the base-case cost-utility analysis, the two strategies produced similar QALYs for similar costs. But it is anticipated that if protocol had been followed correctly, the COBRA-light strategy would have been more costly due to additional etanercept costs, for a limited health gain. Given the limited added benefit and high costs of starting etanercept in the presence of low disease activity in our trial, such a strategy needs better justification than is available now. 55552928, Results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lohri, Christian Riuji, E-mail: christian.lohri@eawag.ch; Camenzind, Ephraim Joseph, E-mail: ephraimcamenzind@hotmail.com; Zurbrügg, Christian, E-mail: christian.zurbruegg@eawag.ch
Highlights: • Cost-revenue analysis over 2 years revealed insufficient cost-recovery. • Expenses for motorized secondary collection increased by 82% over two years. • Low fee collection rate and reliance on only one revenue stream are problematic. • Different options for cost reduction and enhanced revenue streams are recommended. • Good public–private alliance is crucial to plan and implement improvement measures. - Abstract: Providing good solid waste management (SWM) services while also ensuring financial sustainability of the system continues to be a major challenge in cities of developing countries. Bahir Dar in northwestern Ethiopia outsourced municipal waste services to a privatemore » waste company in 2008. While this institutional change has led to substantial improvement in the cleanliness of the city, its financial sustainability remains unclear. Is the private company able to generate sufficient revenues from their activities to offset the costs and generate some profit? This paper presents a cost-revenue analysis, based on data from July 2009 to June 2011. The analysis reveals that overall costs in Bahir Dar’s SWM system increased significantly during this period, mainly due to rising costs related to waste transportation. On the other hand, there is only one major revenue stream in place: the waste collection fee from households, commercial enterprises and institutions. As the efficiency of fee collection from households is only around 50%, the total amount of revenues are not sufficient to cover the running costs. This results in a substantial yearly deficit. The results of the research therefore show that a more detailed cost structure and cost-revenue analysis of this waste management service is important with appropriate measures, either by the privates sector itself or with the support of the local authorities, in order to enhance cost efficiency and balance the cost-revenues towards cost recovery. Delays in mitigating the evident financial deficit could else endanger the public-private partnership (PPP) and lead to failure of this setup in the medium to long term, thus also endangering the now existing improved and currently reliable service. We present four options on how financial sustainability of the SWM system in Bahir Dar might be enhanced: (i) improved fee collection efficiency by linking the fees of solid waste collection to water supply; (ii) increasing the value chain by sales of organic waste recycling products; (iii) diversifying revenue streams and financing mechanisms (polluter-pays-, cross-subsidy- and business-principles); and (iv) cost reduction and improved cost-effectiveness. We argue that in a PPP setup such as in Bahir Dar, a strong alliance between the municipality and private enterprise is important so that appropriate solutions for improved financial sustainability of a SWM system can be sought and implemented.« less
Endovascular training with animals versus virtual reality systems: an economic analysis.
Berry, Max; Hellström, Mikael; Göthlin, Jan; Reznick, Richard; Lönn, Lars
2008-02-01
To assess the relative costs of a virtual reality (VR) laboratory and an animal laboratory for endovascular skills training. Cost data extracted from a previous experiment was used to perform a financial analysis according to the guidelines published by the National Institutes of Health. The analysis compared the purchase or rental of a Procedicus Vascular Interventional System Trainer to the rental of an animal laboratory. The VR laboratory course cost $3,434 per trainee versus $4,634 in the animal laboratory according to the purchase-versus-rental analysis. The cost ratio was 0.74 in favor of the VR laboratory. Cost ratio sensitivity analysis ranged from 0.25 in favor of the VR laboratory to 2.22 in favor of the animal laboratory. The first-year potential savings were $62,410 assuming exclusive use of the VR laboratory. The 5-year training savings totaled $390,376, excluding the $60,000 residual value of the simulator. Simulator rental reduced the course price to $1,076 per trainee and lowered the cost ratio to 0.23 in favor of the VR laboratory. Findings of sensitivity analysis ranged from 0.08 to 0.70 in favor of the VR laboratory. The first-year and 5-year potential national savings increased to $185,026 and $1,013,238, respectively. Although evidence remains sparse that the training of interventional skills in artificial environments translates to better performance in human procedures, there are good pedagogic grounds on which to believe that such training will become increasingly important. The present comparison of the direct costs of two such models suggests that VR training is less expensive than live animal training.
NASA Technical Reports Server (NTRS)
1980-01-01
The cost estimation and economic evaluation methodologies presented are consistent with industry practice for assessing capital investment requirements and operating costs of coal conversion systems. All values stated are based on January, 1980 dollars with appropriate recognition of the time value of money. Evaluation of project economic feasibility can be considered a two step process (subject to considerable refinement). First, the costs of the project must be quantified and second, the price at which the product can be manufacturd must be determined. These two major categories are discussed. The summary of methodology is divided into five parts: (1) systems costs, (2)instant plant costs, (3) annual operating costs, (4) escalation and discounting process, and (5) product pricing.
Comparative hospital cost-analysis of open and robotic-assisted radical prostatectomy.
Tomaszewski, Jeffrey J; Matchett, Jarred C; Davies, Benjamin J; Jackman, Stephen V; Hrebinko, Ronald L; Nelson, Joel B
2012-07-01
To perform a contemporary comparative cost-analysis of robotic-assisted laparoscopic radical prostatectomy (RARP) and open radical retropubic prostatectomy (RRP). All patients undergoing RARP (n = 115) or RRP (n = 358) by 1 of 4 surgeons at a single institution during a 15-month period were retrospectively reviewed. The hospital length of stay (LOS), operative time, hospital charges, reimbursement, and direct and indirect hospital costs were analyzed and compared. The mean LOS between patients undergoing RARP (1.2 ± 0.6 days) and RRP (1.4 ± 0.8 days) was not significantly different. The operating room supply costs per case were almost 7 times greater for RARP ($2852 ± $528) than for RRP ($417 ± $59; P < .05). The ancillary, cardiology, imaging, administrative, laboratory, and pharmacy costs were not significantly different between the 2 approaches. The mean total costs per case for RARP exceeded the total costs for RRP by 62% ($14 006 ± $1641 vs $8686 ± $1989; P < .05). Payment to the hospital from all sources was nearly equivalent: $10 011 for RRP and $9993 for RARP. Therefore, the average profit for each RRP was $1325 and each RARP lost $4013. In the present single-institution analysis, the total actual costs associated with RARP were significantly greater than those for RRP and were attributable to the robotic equipment and supplies. Copyright © 2012 Elsevier Inc. All rights reserved.
Granados-García, Víctor; Velázquez, F Raúl; Salmerón, Jorge; Homedes, Nuria; Salinas-Escudero, Guillermo; Morales-Cisneros, Gabriela
2011-09-02
To estimate the health impact and the costs of treatment associated with rotavirus diarrhea in six yearly cohorts (2001-2006) of Mexican infants. The perspective of study is from the health care system. We estimated the effect of rotavirus diarrhea on disability adjusted life years (DALYS) and diarrhea treatment costs in hypothetical cohorts of infants who are followed from birth up to five years of age beginning in years from 2001 to 2006. We used information from administrative databases on mortality and health care from the National System of Information on Health and from the Mexican Institute for Social Security to feed a decision analysis to project the burden of disease and costs of treatment. Estimates of DALYS were 19,426 in 2001 and decreased by 28.9% for 2006 meanwhile costs of treatment were relatively constant, estimated at US$ 38.7 million and increased only by 5%. Rotavirus diarrhea in Mexican children is a major disease burden, presenting significant treatment costs. Rotavirus diarrhea mortality is decreasing; however this has not led to a steady decrease in treatment costs in the 6 years period of analysis. A sensitivity analysis showed that incidences of rotavirus diarrhea as well as the parameters associated with health-care access were the main factors, which had a significant effect on the projected burden of disease and costs. Copyright © 2011 Elsevier Ltd. All rights reserved.
Lee, Kenneth K C; You, Joyce H S; Wong, Ian C K; Kwong, Sunny K S; Lau, James Y W; Chan, Thomas Y K; Lau, Joseph T F; Leung, Wilson Y S; Sung, Joseph J Y; Chung, Sydney S C
2003-02-01
Intravenous administration of proton pump inhibitors after endoscopic treatment of bleeding peptic ulcers has been shown to decrease the rate of recurrent bleeding and the need for subsequent surgery. Yet there is a relative lack of formal assessment of this practice. The aim of this study was to examine the cost-effectiveness of this therapy by using standard pharmacoeconomic methods. The present study was performed in conjunction with a randomized controlled clinical trial that included 232 patients who received either omeprazole (80 mg intravenous bolus followed by infusion at 8 mg/hour for 72 hours) or placebo after hemostasis was achieved endoscopically. A cost-effectiveness analysis was performed to evaluate the different outcomes of the trial. All related direct medical costs were identified from patient records. Cost-effectiveness ratios were calculated. Analysis by the Kolmogorov-Smirnov test showed that the direct medical cost in the omeprazole group was lower than that for the placebo group. Cost-effectiveness ratios for omeprazole and placebo groups were, respectively, HK$ 28,764 (US$ 3688) and HK$ 36,992 (US$ 4743) in averting one episode of recurrent bleeding in one patient after initial hemostasis was achieved endoscopically. Intravenous administration of high-dose omeprazole appears to be a cost-effective therapy in reducing the recurrence of bleeding and need for surgery in patients with active bleeding ulcer after initial hemostasis is obtained endoscopically.
Open pit mining profit maximization considering selling stage and waste rehabilitation cost
NASA Astrophysics Data System (ADS)
Muttaqin, B. I. A.; Rosyidi, C. N.
2017-11-01
In open pit mining activities, determination of the cut-off grade becomes crucial for the company since the cut-off grade affects how much profit will be earned for the mining company. In this study, we developed a cut-off grade determination mode for the open pit mining industry considering the cost of mining, waste removal (rehabilitation) cost, processing cost, fixed cost, and selling stage cost. The main goal of this study is to develop a model of cut-off grade determination to get the maximum total profit. Secondly, this study is also developed to observe the model of sensitivity based on changes in the cost components. The optimization results show that the models can help mining company managers to determine the optimal cut-off grade and also estimate how much profit that can be earned by the mining company. To illustrate the application of the models, a numerical example and a set of sensitivity analysis are presented. From the results of sensitivity analysis, we conclude that the changes in the sales price greatly affects the optimal cut-off value and the total profit.
Frew, Emma J; Bhatti, Mobeen; Win, Khine; Sitch, Alice; Lyon, Anna; Pallan, Miranda; Adab, Peymane
2014-02-01
To determine the cost-effectiveness of a physical activity programme (Be Active) aimed at city-dwelling adults living in Birmingham, UK. Very little is known about the cost-effectiveness of public health programmes to improve city-wide physical activity rates. This paper presents a cost-effectiveness analysis that compares a physical activity intervention (Be Active) with no intervention (usual care) using an economic model to quantify the reduction in disease risk over a lifetime. Metabolic equivalent minutes achieved per week, quality-adjusted life years (QALYs) gained and healthcare costs were all included as the main outcome measures in the model. A cost-benefit analysis was also conducted using 'willingness-to-pay' as a measure of value. Under base-case assumptions-that is, assuming that the benefits of increased physical activity are sustained over 5 years, participation in the Be Active programme increased quality-adjusted life expectancy by 0.06 years, at an expected discounted cost of £3552, and thus the cost-effectiveness of Be Active is £400 per QALY. When the start-up costs of the programme are removed from the economic model, the cost-effectiveness is further improved to £16 per QALY. The societal value placed on the Be Active programme was greater than the operation cost therefore the Be Active physical activity intervention results in a net benefit to society. Participation in Be Active appeared to be cost-effective and cost-beneficial. These results support the use of Be Active as part of a public health programme to improve physical activity levels within the Birmingham-wide population.
Coal gasification systems engineering and analysis. Appendix D: Cost and economic studies
NASA Technical Reports Server (NTRS)
1980-01-01
The detailed cost estimate documentation for the designs prepared in this study are presented. The include: (1) Koppers-Totzek, (2) Texaco (3) Babcock and Wilcox, (4) BGC-Lurgi, and (5) Lurgi. The alternate product cost estimates include: (1) Koppers-Totzek and Texaco single product facilities (methane, methanol, gasoline, hydrogen), (2) Kopers-Totzek SNG and MBG, (3) Kopers-Totzek and Texaco SNG and MBG, and (4) Lurgi-methane and Lurgi-methane and methanol.
External risk factors affecting construction costs
NASA Astrophysics Data System (ADS)
Mubarak, Husin, Saiful; Oktaviati, Mutia
2017-11-01
Some risk factors can have impacts on the cost, time, and performance. Results of previous studies indicated that the external conditions are among the factors which give effect to the contractor in the completion of the project. The analysis in the study carried out by considering the conditions of the project in the last 15 years in Aceh province, divided into military conflict phase (2000-2004), post tsunami disaster rehabilitation and reconstruction phase (2005-2009), and post-rehabilitation and reconstruction phase (2010-present). This study intended to analyze the impact of external risk factors, primarily related to the impact on project costs and to investigate the influence of the risk factors and construction phases impacted the project cost. Data was collected by using a questionnaire distributed in 15 large companies qualification contractors in Aceh province. Factors analyzed consisted of socio-political, government policies, natural disasters, and monetary conditions. Data were analyzed using statistical application of severity index to measure the level of risk impact. The analysis results presented the tendency of impact on cost can generally be classified as low. There is only one variable classified as high-impact, variable `fuel price increases', which appear on the military conflict and post tsunami disaster rehabilitation and reconstruction periods. The risk impact on costs from the factors and variables classified with high intensity needs a serious attention, especially when the high level impact is followed by the high frequency of occurrences.
Decreasing the Risk of Adopting New Interactive Instructional Delivery Technologies.
ERIC Educational Resources Information Center
Dennis, Verl E.
1993-01-01
Discusses new interactive training technologies; considers risks of adopting a new technology; and presents the conceptual framework of technology life cycle analysis that provides timing information for the adoption of a new technology that should be used in addition to cost-benefit analysis and technical analysis. (LRW)
Lohri, Christian Riuji; Camenzind, Ephraim Joseph; Zurbrügg, Christian
2014-02-01
Providing good solid waste management (SWM) services while also ensuring financial sustainability of the system continues to be a major challenge in cities of developing countries. Bahir Dar in northwestern Ethiopia outsourced municipal waste services to a private waste company in 2008. While this institutional change has led to substantial improvement in the cleanliness of the city, its financial sustainability remains unclear. Is the private company able to generate sufficient revenues from their activities to offset the costs and generate some profit? This paper presents a cost-revenue analysis, based on data from July 2009 to June 2011. The analysis reveals that overall costs in Bahir Dar's SWM system increased significantly during this period, mainly due to rising costs related to waste transportation. On the other hand, there is only one major revenue stream in place: the waste collection fee from households, commercial enterprises and institutions. As the efficiency of fee collection from households is only around 50%, the total amount of revenues are not sufficient to cover the running costs. This results in a substantial yearly deficit. The results of the research therefore show that a more detailed cost structure and cost-revenue analysis of this waste management service is important with appropriate measures, either by the privates sector itself or with the support of the local authorities, in order to enhance cost efficiency and balance the cost-revenues towards cost recovery. Delays in mitigating the evident financial deficit could else endanger the public-private partnership (PPP) and lead to failure of this setup in the medium to long term, thus also endangering the now existing improved and currently reliable service. We present four options on how financial sustainability of the SWM system in Bahir Dar might be enhanced: (i) improved fee collection efficiency by linking the fees of solid waste collection to water supply; (ii) increasing the value chain by sales of organic waste recycling products; (iii) diversifying revenue streams and financing mechanisms (polluter-pays-, cross-subsidy- and business-principles); and (iv) cost reduction and improved cost-effectiveness. We argue that in a PPP setup such as in Bahir Dar, a strong alliance between the municipality and private enterprise is important so that appropriate solutions for improved financial sustainability of a SWM system can be sought and implemented. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
James, Brian David; Huya-Kouadio, Jennie Moton; Houchins, Cassidy
This report summarizes project activities for Strategic Analysis, Inc. (SA) Contract Number DE-EE0005236 to the U.S. Department of Energy titled “Transportation Fuel Cell System Cost Assessment”. The project defined and projected the mass production costs of direct hydrogen Proton Exchange Membrane fuel cell power systems for light-duty vehicles (automobiles) and 40-foot transit buses. In each year of the five-year contract, the fuel cell power system designs and cost projections were updated to reflect technology advances. System schematics, design assumptions, manufacturing assumptions, and cost results are presented.
ERIC Educational Resources Information Center
Mason, Robert M.; And Others
This document presents a research effort intended to improve the economic information available for formulating politics and making decisions related to Information Analysis Centers (IAC's) and IAC services. The project used a system of IAC information activities to analyze the functional aspects of IAC services, calculate the present value of net…
Cost-Effectiveness Data Regarding Spinal Cord Stimulation for Low Back Pain.
Hoelscher, Christian; Riley, Jonathan; Wu, Chengyuan; Sharan, Ashwini
2017-07-15
Review of published literature pertaining to spinal cord stimulation (SCS) cost data analysis. To acquire, organize, and succinctly summarize the available literature regarding the costs associated with, and the cost-effectiveness of, SCS. Chronic back and limb pain is a pervasive complaint in modern society, with estimated annual costs of medical care greater than $100 billion. The traditional standard medical management with or without intermittent surgical decompression/fusion has been plagued by high costs and inconsistent results, leading to poor patient satisfaction and functional outcome, and questions from policy makers regarding use of limited healthcare resources. Neuromodulation techniques, including SCS have recently become more common in the treatment of chronic back/leg pain, with clinical studies showing a high degree of efficacy in alleviating otherwise intractable pain. Given the relatively high upfront costs associated with the hardware and implantation, policy makers have, however, questioned their use in the framework of cost-containment and resource utilization. We reviewed the available literature summarizing cost data of SCS in chronic back and limb pain, as an understanding of these data will be vital to justify continued payment for this expensive, but often very effective, treatment modality. We performed a PubMed literature search utilizing the following terms: "spinal cord stimulation," "SCS," "financial," "cost," "cost-effectiveness," and "cost-utility." All studies published in English and containing complete or partial cost evaluations of SCS for chronic back and limb pain were included. The search revealed 21 studies that evaluated cost data, with or without outcomes analysis and cost-utility analysis, for patients with chronic back and limb pain. The overwhelming majority of data presented shows that SCS is not only an effective treatment option for these patients, but also represents cost savings and efficient use of healthcare resources relative to current standards of care. Although not all studies performed cost-utility analyses, those that did tended to show SCS falling well within accepted thresholds of "willingness-to-pay" on the part of third-party payers. That being said, the articles included in this review were almost all small, retrospective, single-institution studies. In addition, many of them relied on modeling for their analyses, and published literature values for cost and/or outcomes data rather than prospectively collected patient data. Although the data presented in this review are encouraging, it should serve as a foundation for a thorough, prospective, cost-utility analysis of SCS in chronic back and limb pain so that the role of this important treatment modality may be cemented in the treatment paradigm for these patients without questions from third-party payers. The large majority of data covering costs of SCS argue in favor of the cost-effectiveness of this treatment modality for chronic neuropathic pain, especially in comparison to reoperation and medical management. Although most of the higher-quality evidence is relatively short-term, clinical experience with the durability of treatment benefit of SCS in these patients is promising. Given the pushback regarding high upfront costs of implantation, longer-term, prospective, randomized studies evaluating this topic will be important to help maintain third-party payer reimbursements for SCS. 5.
Analysis of actual healthcare costs of early versus interval cholecystectomy in acute cholecystitis.
Tan, Cheryl H M; Pang, Tony C Y; Woon, Winston W L; Low, Jee Keem; Junnarkar, Sameer P
2015-03-01
Healthcare cost modeling have favored early (ELC) over interval laparoscopic cholecystectomy (ILC) for acute cholecystitis (AC). However, actual costs of treatment have never been studied. The aim of the present study was to compare actual hospital costs involved in ELC and ILC in patients with AC. Retrospective study of patients who underwent laparoscopic cholecystectomy for AC was conducted. Demographic, clinical, operative data and costs were extracted and analyzed. Between 2011 and 2013, 201 had laparoscopic surgery for AC at Tan Tock Seng Hospital, Singapore. One hundred and thirty-four (67%) patients underwent ELC (≤7 days of presentation, within index admission). Median total length of stay (LOS) was 4.6 and 6.8 days for ELC and ILC groups, respectively (P = 0.006). Patients who had ELC also had significantly lesser total number of admissions (P < 0.001). The median (IQR) total inpatient costs were €4.4 × 10(3) (3.6-5.6) and €5.5 × 10(3) (4.0-7.5) for ELC and ILC patients, respectively (P < 0.007). Costs associated with investigations were significantly higher in the ILC group (P = 0.039), of which serological costs made most difference (P < 0.005). The ward costs were also significantly higher in the ILC group. The cost differences reflect the significantly increased total LOS, and repeat presentations associated with ILC. Therefore, ELC should be the preferred management strategy for AC. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.
2009-01-01
Background The aim of the ACE-Obesity study was to determine the economic credentials of interventions which aim to prevent unhealthy weight gain in children and adolescents. We have reported elsewhere on the modelled effectiveness of 13 obesity prevention interventions in children. In this paper, we report on the cost results and associated methods together with the innovative approach to priority setting that underpins the ACE-Obesity study. Methods The Assessing Cost Effectiveness (ACE) approach combines technical rigour with 'due process' to facilitate evidence-based policy analysis. Technical rigour was achieved through use of standardised evaluation methods, a research team that assembles best available evidence and extensive uncertainty analysis. Cost estimates were based on pathway analysis, with resource usage estimated for the interventions and their 'current practice' comparator, as well as associated cost offsets. Due process was achieved through involvement of stakeholders, consensus decisions informed by briefing papers and 2nd stage filter analysis that captures broader factors that influence policy judgements in addition to cost-effectiveness results. The 2nd stage filters agreed by stakeholders were 'equity', 'strength of the evidence', 'feasibility of implementation', 'acceptability to stakeholders', 'sustainability' and 'potential for side-effects'. Results The intervention costs varied considerably, both in absolute terms (from cost saving [6 interventions] to in excess of AUD50m per annum) and when expressed as a 'cost per child' estimate (from
Thiboonboon, Kittiphong; Leelahavarong, Pattara; Wattanasirichaigoon, Duangrurdee; Vatanavicharn, Nithiwat; Wasant, Pornswan; Shotelersuk, Vorasuk; Pangkanon, Suthipong; Kuptanon, Chulaluck; Chaisomchit, Sumonta; Teerawattananon, Yot
2015-01-01
Inborn errors of metabolism (IEM) are a rare group of genetic diseases which can lead to several serious long-term complications in newborns. In order to address these issues as early as possible, a process called tandem mass spectrometry (MS/MS) can be used as it allows for rapid and simultaneous detection of the diseases. This analysis was performed to determine whether newborn screening by MS/MS is cost-effective in Thailand. A cost-utility analysis comprising a decision-tree and Markov model was used to estimate the cost in Thai baht (THB) and health outcomes in life-years (LYs) and quality-adjusted life year (QALYs) presented as an incremental cost-effectiveness ratio (ICER). The results were also adjusted to international dollars (I$) using purchasing power parities (PPP) (1 I$ = 17.79 THB for the year 2013). The comparisons were between 1) an expanded neonatal screening programme using MS/MS screening for six prioritised diseases: phenylketonuria (PKU); isovaleric acidemia (IVA); methylmalonic acidemia (MMA); propionic acidemia (PA); maple syrup urine disease (MSUD); and multiple carboxylase deficiency (MCD); and 2) the current practice that is existing PKU screening. A comparison of the outcome and cost of treatment before and after clinical presentations were also analysed to illustrate the potential benefit of early treatment for affected children. A budget impact analysis was conducted to illustrate the cost of implementing the programme for 10 years. The ICER of neonatal screening using MS/MS amounted to 1,043,331 THB per QALY gained (58,647 I$ per QALY gained). The potential benefits of early detection compared with late detection yielded significant results for PKU, IVA, MSUD, and MCD patients. The budget impact analysis indicated that the implementation cost of the programme was expected at approximately 2,700 million THB (152 million I$) over 10 years. At the current ceiling threshold, neonatal screening using MS/MS in the Thai context is not cost-effective. However, the treatment of patients who were detected early for PKU, IVA, MSUD, and MCD, are considered favourable. The budget impact analysis suggests that the implementation of the programme will incur considerable expenses under limited resources. A long-term epidemiological study on the incidence of IEM in Thailand is strongly recommended to ascertain the magnitude of problem.
[Cost-effectiveness of drotrecogin alpha [activated] in the treatment of severe sepsis in Spain].
Sacristán, José A; Prieto, Luis; Huete, Teresa; Artigas, Antonio; Badia, Xavier; Chinn, Christopher; Hudson, Peter
2004-01-01
The PROWESS clinical trial has shown that treatment with drotrecogin alpha (activated) in patients with severe sepsis is associated with a reduction in the absolute risk of death compared with standard treatment. The aim of the present study was to assess the cost-effectiveness of drotrecogin alpha (activated) versus that of standard care in the treatment of severe sepsis in Spain. A decision analysis model was drawn up to compare costs to hospital discharge and the long-term efficacy of drotrecogin alpha (activated) versus those of standard care in the treatment of severe sepsis in Spain from the perspective of the health care payer. Most of the information for creating the model was obtained from the PROWESS clinical trial. A two-fold baseline analysis was performed: a) for all patients included in the PROWESS clinical trial and b) for the patients with two or more organ failures. The major variables for clinical assessment were the reduction in mortality and years of life gained (YLG). Cost-effectiveness was expressed as cost per YLG. A sensitivity analysis was applied using 3% and 5% discount rates for YLG and by modifying the patterns of health care, intensive care unit costs, and life expectancy by initial co-morbidity and therapeutic efficacy of drotrecogin alpha (activated). Treatment with drotrecogin alfa (activated) was associated with a 6.0% drop in the absolute risk of death (p = 0.005) when all of the patients from the PROWESS trial were included and with a 7.3% reduction (p = 0.005) when the analysis was restricted to patients with two or more organ failures. The cost-effectiveness of drotrecogin alfa (activated) was 13,550 euros per YLG with respect to standard care after analysing all of the patients and 9,800 euros per YLG in the group of patients with two or more organ failures. In the sensitivity analysis, the results ranged from 7,322 to 16,493 euros per YLG. The factors with the greatest impact on the results were the change in the efficacy of drotrecogin alfa (activated), adjustment of survival by initial co-morbidity and the application of discount rates to YLG. Treatment with drotrecogin alfa (activated) presents a favorable cost-effectiveness ratio compared with other health care interventions commonly used in Spain.
Thiboonboon, Kittiphong; Leelahavarong, Pattara; Wattanasirichaigoon, Duangrurdee; Vatanavicharn, Nithiwat; Wasant, Pornswan; Shotelersuk, Vorasuk; Pangkanon, Suthipong; Kuptanon, Chulaluck; Chaisomchit, Sumonta; Teerawattananon, Yot
2015-01-01
Background Inborn errors of metabolism (IEM) are a rare group of genetic diseases which can lead to several serious long-term complications in newborns. In order to address these issues as early as possible, a process called tandem mass spectrometry (MS/MS) can be used as it allows for rapid and simultaneous detection of the diseases. This analysis was performed to determine whether newborn screening by MS/MS is cost-effective in Thailand. Method A cost-utility analysis comprising a decision-tree and Markov model was used to estimate the cost in Thai baht (THB) and health outcomes in life-years (LYs) and quality-adjusted life year (QALYs) presented as an incremental cost-effectiveness ratio (ICER). The results were also adjusted to international dollars (I$) using purchasing power parities (PPP) (1 I$ = 17.79 THB for the year 2013). The comparisons were between 1) an expanded neonatal screening programme using MS/MS screening for six prioritised diseases: phenylketonuria (PKU); isovaleric acidemia (IVA); methylmalonic acidemia (MMA); propionic acidemia (PA); maple syrup urine disease (MSUD); and multiple carboxylase deficiency (MCD); and 2) the current practice that is existing PKU screening. A comparison of the outcome and cost of treatment before and after clinical presentations were also analysed to illustrate the potential benefit of early treatment for affected children. A budget impact analysis was conducted to illustrate the cost of implementing the programme for 10 years. Results The ICER of neonatal screening using MS/MS amounted to 1,043,331 THB per QALY gained (58,647 I$ per QALY gained). The potential benefits of early detection compared with late detection yielded significant results for PKU, IVA, MSUD, and MCD patients. The budget impact analysis indicated that the implementation cost of the programme was expected at approximately 2,700 million THB (152 million I$) over 10 years. Conclusion At the current ceiling threshold, neonatal screening using MS/MS in the Thai context is not cost-effective. However, the treatment of patients who were detected early for PKU, IVA, MSUD, and MCD, are considered favourable. The budget impact analysis suggests that the implementation of the programme will incur considerable expenses under limited resources. A long-term epidemiological study on the incidence of IEM in Thailand is strongly recommended to ascertain the magnitude of problem. PMID:26258410
Chowers, Michal; Carmeli, Yehuda; Shitrit, Pnina; Elhayany, Asher; Geffen, Keren
2015-01-01
Our objective was to assess the cost implications of a vertical MRSA prevention program that led to a reduction in MRSA bacteremia. We performed a matched historical cohort study and cost analysis in a single hospital in Israel for the years 2005-2011. The cost of MRSA bacteremia was calculated as total hospital cost for patients admitted with bacteremia and for patients with hospital-acquired bacteremia, the difference in cost compared to matched controls. The cost of prevention was calculated as the sum of the cost of microbiology tests, single-use equipment used for patients in isolation, and infection control personnel. An average of 20,000 patients were screened yearly. The cost of prevention was $208,100 per year, with the major contributor being laboratory cost. We calculated that our intervention averted 34 cases of bacteremia yearly: 17 presenting on admission and 17 acquired in the hospital. The average cost of a case admitted with bacteremia was $14,500, and the net cost attributable to nosocomial bacteremia was $9,400. Antibiotics contributed only 0.4% of the total disease management cost. When the annual cost of averted cases of bacteremia and that of prevention were compared, the intervention resulted in annual cost savings of $199,600. A vertical MRSA prevention program targeted at high-risk patients, which was highly effective in preventing bacteremia, is cost saving. These results suggest that allocating resources to targeted prevention efforts might be beneficial even in a single institution in a high incidence country.
Cost Risk Analysis Based on Perception of the Engineering Process
NASA Technical Reports Server (NTRS)
Dean, Edwin B.; Wood, Darrell A.; Moore, Arlene A.; Bogart, Edward H.
1986-01-01
In most cost estimating applications at the NASA Langley Research Center (LaRC), it is desirable to present predicted cost as a range of possible costs rather than a single predicted cost. A cost risk analysis generates a range of cost for a project and assigns a probability level to each cost value in the range. Constructing a cost risk curve requires a good estimate of the expected cost of a project. It must also include a good estimate of expected variance of the cost. Many cost risk analyses are based upon an expert's knowledge of the cost of similar projects in the past. In a common scenario, a manager or engineer, asked to estimate the cost of a project in his area of expertise, will gather historical cost data from a similar completed project. The cost of the completed project is adjusted using the perceived technical and economic differences between the two projects. This allows errors from at least three sources. The historical cost data may be in error by some unknown amount. The managers' evaluation of the new project and its similarity to the old project may be in error. The factors used to adjust the cost of the old project may not correctly reflect the differences. Some risk analyses are based on untested hypotheses about the form of the statistical distribution that underlies the distribution of possible cost. The usual problem is not just to come up with an estimate of the cost of a project, but to predict the range of values into which the cost may fall and with what level of confidence the prediction is made. Risk analysis techniques that assume the shape of the underlying cost distribution and derive the risk curve from a single estimate plus and minus some amount usually fail to take into account the actual magnitude of the uncertainty in cost due to technical factors in the project itself. This paper addresses a cost risk method that is based on parametric estimates of the technical factors involved in the project being costed. The engineering process parameters are elicited from the engineer/expert on the project and are based on that expert's technical knowledge. These are converted by a parametric cost model into a cost estimate. The method discussed makes no assumptions about the distribution underlying the distribution of possible costs, and is not tied to the analysis of previous projects, except through the expert calibrations performed by the parametric cost analyst.