What linear programming contributes: world food programme experience with the "cost of the diet" tool.

PubMed

Frega, Romeo; Lanfranco, Jose Guerra; De Greve, Sam; Bernardini, Sara; Geniez, Perrine; Grede, Nils; Bloem, Martin; de Pee, Saskia

2012-09-01

Linear programming has been used for analyzing children's complementary feeding diets, for optimizing nutrient adequacy of dietary recommendations for a population, and for estimating the economic value of fortified foods. To describe and apply a linear programming tool ("Cost of the Diet") with data from Mozambique to determine what could be cost-effective fortification strategies. Based on locally assessed average household dietary needs, seasonal market prices of available food products, and food composition data, the tool estimates the lowest-cost diet that meets almost all nutrient needs. The results were compared with expenditure data from Mozambique to establish the affordability of this diet by quintiles of the population. Three different applications were illustrated: identifying likely "limiting nutrients," comparing cost effectiveness of different fortification interventions at the household level, and assessing economic access to nutritious foods. The analysis identified iron, vitamin B2, and pantothenic acid as "limiting nutrients." Under the Mozambique conditions, vegetable oil was estimated as a more cost-efficient vehicle for vitamin A fortification than sugar; maize flour may also be an effective vehicle to provide other constraining micronutrients. Multiple micronutrient fortification of maize flour could reduce the cost of the "lowest-cost nutritious diet" by 18%, but even this diet can be afforded by only 20% of the Mozambican population. Within the context of fortification, linear programming can be a useful tool for identifying likely nutrient inadequacies, for comparing fortification options in terms of cost effectiveness, and for illustrating the potential benefit of fortification for improving household access to a nutritious diet.

An Interactive Life Cycle Cost Forecasting Tool

DTIC Science & Technology

1990-03-01

of Phase in period PO - Length of Phase out period PV - Present value viii AFIT/GOR/ENS/90M-17 Abstract A tool was developed for Monte Carlo...and B. Note that this is for a given configuration. The E represents effectiveness and is equated to some function of the quantity of systems A and B...purchased. Either strategy, maximizing effectiveness or minimizing cost, leads to some type of cost comparison among the proposed systems. The problem

Mechanics and energetics in tool manufacture and use: a synthetic approach.

PubMed

Wang, Liyu; Brodbeck, Luzius; Iida, Fumiya

2014-11-06

Tool manufacture and use are observed not only in humans but also in other animals such as mammals, birds and insects. Manufactured tools are used for biomechanical functions such as effective control of fluids and small solid objects and extension of reaching. These tools are passive and used with gravity and the animal users' own energy. From the perspective of evolutionary biology, manufactured tools are extended phenotypes of the genes of the animal and exhibit phenotypic plasticity. This incurs energetic cost of manufacture as compared to the case with a fixed tool. This paper studies mechanics and energetics aspects of tool manufacture and use in non-human beings. Firstly, it investigates possible mechanical mechanisms of the use of passive manufactured tools. Secondly, it formulates the energetic cost of manufacture and analyses when phenotypic plasticity benefits an animal tool maker and user. We take a synthetic approach and use a controlled physical model, i.e. a robot arm. The robot is capable of additively manufacturing scoop and gripper structures from thermoplastic adhesives to pick and place fluid and solid objects, mimicking primates and birds manufacturing tools for a similar function. We evaluate the effectiveness of tool use in pick-and-place and explain the mechanism for gripper tools picking up solid objects with a solid-mechanics model. We propose a way to formulate the energetic cost of tool manufacture that includes modes of addition and reshaping, and use it to analyse the case of scoop tools. Experiment results show that with a single motor trajectory, the robot was able to effectively pick and place water, rice grains, a pebble and a plastic box with a scoop tool or gripper tools that were manufactured by itself. They also show that by changing the dimension of scoop tools, the energetic cost of tool manufacture and use could be reduced. The work should also be interesting for engineers to design adaptive machines. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Mechanics and energetics in tool manufacture and use: a synthetic approach

PubMed Central

Wang, Liyu; Brodbeck, Luzius; Iida, Fumiya

2014-01-01

Tool manufacture and use are observed not only in humans but also in other animals such as mammals, birds and insects. Manufactured tools are used for biomechanical functions such as effective control of fluids and small solid objects and extension of reaching. These tools are passive and used with gravity and the animal users' own energy. From the perspective of evolutionary biology, manufactured tools are extended phenotypes of the genes of the animal and exhibit phenotypic plasticity. This incurs energetic cost of manufacture as compared to the case with a fixed tool. This paper studies mechanics and energetics aspects of tool manufacture and use in non-human beings. Firstly, it investigates possible mechanical mechanisms of the use of passive manufactured tools. Secondly, it formulates the energetic cost of manufacture and analyses when phenotypic plasticity benefits an animal tool maker and user. We take a synthetic approach and use a controlled physical model, i.e. a robot arm. The robot is capable of additively manufacturing scoop and gripper structures from thermoplastic adhesives to pick and place fluid and solid objects, mimicking primates and birds manufacturing tools for a similar function. We evaluate the effectiveness of tool use in pick-and-place and explain the mechanism for gripper tools picking up solid objects with a solid-mechanics model. We propose a way to formulate the energetic cost of tool manufacture that includes modes of addition and reshaping, and use it to analyse the case of scoop tools. Experiment results show that with a single motor trajectory, the robot was able to effectively pick and place water, rice grains, a pebble and a plastic box with a scoop tool or gripper tools that were manufactured by itself. They also show that by changing the dimension of scoop tools, the energetic cost of tool manufacture and use could be reduced. The work should also be interesting for engineers to design adaptive machines. PMID:25209405

Vector production in an academic environment: a tool to assess production costs.

PubMed

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan; Cornetta, Kenneth

2013-02-01

Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production.

Vector Production in an Academic Environment: A Tool to Assess Production Costs

PubMed Central

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

FIA BioSum: a tool to evaluate financial costs, opportunities and effectiveness of fuel treatments.

Treesearch

Jeremy Fried; Glenn Christensen

2004-01-01

FIA BioSum, a tool developed by the USDA Forest Services Forest Inventory and Analysis (FIA) Program, generates reliable cost estimates, identifies opportunities and evaluates the effectiveness of fuel treatments in forested landscapes. BioSum is an analytic framework that integrates a suite of widely used computer models with a foundation of attribute-rich,...

Societal costs in displaced transverse olecranon fractures: using decision analysis tools to find the most cost-effective strategy between tension band wiring and locked plating.

PubMed

Francis, Tittu; Washington, Travis; Srivastava, Karan; Moutzouros, Vasilios; Makhni, Eric C; Hakeos, William

2017-11-01

Tension band wiring (TBW) and locked plating are common treatment options for Mayo IIA olecranon fractures. Clinical trials have shown excellent functional outcomes with both techniques. Although TBW implants are significantly less expensive than a locked olecranon plate, TBW often requires an additional operation for implant removal. To choose the most cost-effective treatment strategy, surgeons must understand how implant costs and return to the operating room influence the most cost-effective strategy. This cost-effective analysis study explored the optimal treatment strategies by using decision analysis tools. An expected-value decision tree was constructed to estimate costs based on the 2 implant choices. Values for critical variables, such as implant removal rate, were obtained from the literature. A Monte Carlo simulation consisting of 100,000 trials was used to incorporate variability in medical costs and implant removal rates. Sensitivity analysis and strategy tables were used to show how different variables influence the most cost-effective strategy. TBW was the most cost-effective strategy, with a cost savings of approximately $1300. TBW was also the dominant strategy by being the most cost-effective solution in 63% of the Monte Carlo trials. Sensitivity analysis identified implant costs for plate fixation and surgical costs for implant removal as the most sensitive parameters influencing the cost-effective strategy. Strategy tables showed the most cost-effective solution as 2 parameters vary simultaneously. TBW is the most cost-effective strategy in treating Mayo IIA olecranon fractures despite a higher rate of return to the operating room. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Cost-effectiveness acceptability curves revisited.

PubMed

Al, Maiwenn J

2013-02-01

Since the introduction of the cost-effectiveness acceptability curve (CEAC) in 1994, its use as a method to describe uncertainty around incremental cost-effectiveness ratios (ICERs) has steadily increased. In this paper, first the construction and interpretation of the CEAC is explained, both in the context of modelling studies and in the context of cost-effectiveness (CE) studies alongside clinical trials. Additionally, this paper reviews the advantages and limitations of the CEAC. Many of the perceived limitations can be attributed to the practice of interpreting the CEAC as a decision rule while it was not developed as such. It is argued that the CEAC is still a useful tool in describing and quantifying uncertainty around the ICER, especially in combination with other tools such as plots on the CE plane and value-of-information analysis.

The cost-effectiveness of quality improvement projects: a conceptual framework, checklist and online tool for considering the costs and consequences of implementation-based quality improvement.

PubMed

Thompson, Carl; Pulleyblank, Ryan; Parrott, Steve; Essex, Holly

2016-02-01

In resource constrained systems, decision makers should be concerned with the efficiency of implementing improvement techniques and technologies. Accordingly, they should consider both the costs and effectiveness of implementation as well as the cost-effectiveness of the innovation to be implemented. An approach to doing this effectively is encapsulated in the 'policy cost-effectiveness' approach. This paper outlines some of the theoretical and practical challenges to assessing policy cost-effectiveness (the cost-effectiveness of implementation projects). A checklist and associated (freely available) online application are also presented to help services develop more cost-effective implementation strategies. © 2015 John Wiley & Sons, Ltd.

How much is tuberculosis screening worth? Estimating the value of active case finding for tuberculosis in South Africa, China, and India.

PubMed

Azman, Andrew S; Golub, Jonathan E; Dowdy, David W

2014-10-30

Current approaches are unlikely to achieve the aggressive global tuberculosis (TB) control targets set for 2035 and beyond. Active case finding (ACF) may be an important tool for augmenting existing strategies, but the cost-effectiveness of ACF remains uncertain. Program evaluators can often measure the cost of ACF per TB case detected, but how this accessible measure translates into traditional metrics of cost-effectiveness, such as the cost per disability-adjusted life year (DALY), remains unclear. We constructed dynamic models of TB in India, China, and South Africa to explore the medium-term impact and cost-effectiveness of generic ACF activities, conceptualized separately as discrete (2-year) campaigns and as continuous activities integrated into ongoing TB control programs. Our primary outcome was the cost per DALY, measured in relationship to the cost per TB case actively detected and started on treatment. Discrete campaigns costing up to $1,200 (95% uncertainty range [UR] 850-2,043) per case actively detected and started on treatment in India, $3,800 (95% UR 2,706-6,392) in China, and $9,400 (95% UR 6,957-13,221) in South Africa were all highly cost-effective (cost per DALY averted less than per capita gross domestic product). Prolonged integration was even more effective and cost-effective. Short-term assessments of ACF dramatically underestimated potential longer term gains; for example, an assessment of an ACF program at 2 years might find a non-significant 11% reduction in prevalence, but a 10-year evaluation of that same intervention would show a 33% reduction. ACF can be a powerful and highly cost-effective tool in the fight against TB. Given that short-term assessments may dramatically underestimate medium-term effectiveness, current willingness to pay may be too low. ACF should receive strong consideration as a basic tool for TB control in most high-burden settings, even when it may cost over $1,000 to detect and initiate treatment for each extra case of active TB.

[Cost-effectiveness of female sex worker interventions by using SEX 2.0 Tool in Dehong prefecture, Yunnan province].

PubMed

Guo, Hao-yan; Duan, Song; Xiang, Li-fen; Ye, Run-hua; Yang, Yue-cheng; Zhang, Hua; Yuan, Jian-hua; Cao, Wei-hua; Xing, Yan; Sun, Jiang-ping

2010-08-01

To perform cost-effectiveness analysis of interventions in female sex workers in Dehong prefecture in China, with an aim of providing evidence for rational resource allocation in female sex worker interventions in the future. The data of expenses for female sex worker interventions in Dehong from 2005 - 2007 were obtained through questionnaire survey. Meanwhile, the data from baseline survey in 2004, from surveillance of female sex workers from 2005 through 2007 as well as from the special survey on sexual transmission in 2007 were collected. Intervention effectiveness was estimated by using SEX 2.0 Tool recommended by UNAIDS. The cost-effectiveness ratio is calculated as the total cost divided by the number of estimated non-HIV patients due to these interventions. The total cost for female sex worker interventions is 916 400 RMB from 2005 through 2007, and a total of 3297 female sex workers were effectively intervened in these three years. Thus, the actual intervention cost for each female sex worker (unit cost) is 277.9 RMB. If all the intervention work is performed as required, the predicted unit cost for female sex worker intervention would be 500.5 RMB. During the period of 2005 through 2007, 69 female sex workers had been successfully prevented from HIV infection; therefore, the cost-effectiveness ratio is 13 282 RMB. Intervention among female sex workers is highly cost-effective.

Cost effectiveness of pediatric pneumococcal conjugate vaccines: a comparative assessment of decision-making tools.

PubMed

Chaiyakunapruk, Nathorn; Somkrua, Ratchadaporn; Hutubessy, Raymond; Henao, Ana Maria; Hombach, Joachim; Melegaro, Alessia; Edmunds, John W; Beutels, Philippe

2011-05-12

Several decision support tools have been developed to aid policymaking regarding the adoption of pneumococcal conjugate vaccine (PCV) into national pediatric immunization programs. The lack of critical appraisal of these tools makes it difficult for decision makers to understand and choose between them. With the aim to guide policymakers on their optimal use, we compared publicly available decision-making tools in relation to their methods, influential parameters and results. The World Health Organization (WHO) requested access to several publicly available cost-effectiveness (CE) tools for PCV from both public and private provenance. All tools were critically assessed according to the WHO's guide for economic evaluations of immunization programs. Key attributes and characteristics were compared and a series of sensitivity analyses was performed to determine the main drivers of the results. The results were compared based on a standardized set of input parameters and assumptions. Three cost-effectiveness modeling tools were provided, including two cohort-based (Pan-American Health Organization (PAHO) ProVac Initiative TriVac, and PneumoADIP) and one population-based model (GlaxoSmithKline's SUPREMES). They all compared the introduction of PCV into national pediatric immunization program with no PCV use. The models were different in terms of model attributes, structure, and data requirement, but captured a similar range of diseases. Herd effects were estimated using different approaches in each model. The main driving parameters were vaccine efficacy against pneumococcal pneumonia, vaccine price, vaccine coverage, serotype coverage and disease burden. With a standardized set of input parameters developed for cohort modeling, TriVac and PneumoADIP produced similar incremental costs and health outcomes, and incremental cost-effectiveness ratios. Vaccine cost (dose price and number of doses), vaccine efficacy and epidemiology of critical endpoint (for example, incidence of pneumonia, distribution of serotypes causing pneumonia) were influential parameters in the models we compared. Understanding the differences and similarities of such CE tools through regular comparisons could render decision-making processes in different countries more efficient, as well as providing guiding information for further clinical and epidemiological research. A tool comparison exercise using standardized data sets can help model developers to be more transparent about their model structure and assumptions and provide analysts and decision makers with a more in-depth view behind the disease dynamics. Adherence to the WHO guide of economic evaluations of immunization programs may also facilitate this process. Please see related article: http://www.biomedcentral.com/1741-7007/9/55.

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

Hospital pharmacy decisions, cost containment, and the use of cost-effectiveness analysis.

PubMed

Sloan, F A; Whetten-Goldstein, K; Wilson, A

1997-08-01

The key hypothesis of the study was that hospital pharmacies under the pressure of managed care would be more likely to adopt process innovations to assure less costly and more cost-effective provision of care. We conducted a survey of 103 hospitals and analyzed secondary data on cost and staffing. Compared to the size of the reduction in length of stay, changes in the way that a day of care is delivered appear to be minor, even in areas with substantial managed care share. The vast majority of hospitals surveyed had implemented some form of therapeutic interchange and generic substitution. Most hospitals used some drug utilization guidelines, but as of mid 1995 these were not yet important management tools for hospital pharmacies. To our knowledge, ours was the first survey to investigate the link between hospital formularies and use of cost-effectiveness analysis. At most cost-effectiveness was a minor tool in pharmaceutical decision making in hospitals at present. We could determine no differences in use of such analyses by managed care market share in the hospital's market share. One impediment to the use of cost-effectiveness studies was the lack of timeliness of studies. Other stated reasons for not using cost-effectiveness analysis more often were: lack of information on hospitalized patients and hence on the potential cost offsets accruing to the hospital: lack of independent sponsorship, and inadequate expertise in economic evaluation.

Software engineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Hiott, Jim; Golej, Jim; Plumb, Allan

1993-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. The Johnson Space Center (JSC) created a significant set of tools to develop and maintain FORTRAN and C code during development of the space shuttle. This tool set forms the basis for an integrated environment to reengineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. The latest release of the environment was in Feb. 1992.

Budget impact analysis of trastuzumab in early breast cancer: a hospital district perspective.

PubMed

Purmonen, Timo T; Auvinen, Päivi K; Martikainen, Janne A

2010-04-01

Adjuvant trastuzumab is widely used in HER2-positive (HER2+) early breast cancer, and despite its cost-effectiveness, it causes substantial costs for health care. The purpose of the study was to develop a tool for estimating the budget impact of new cancer treatments. With this tool, we were able to estimate the budget impact of adjuvant trastuzumab, as well as the probability of staying within a given budget constraint. The created model-based evaluation tool was used to explore the budget impact of trastuzumab in early breast cancer in a single Finnish hospital district with 250,000 inhabitants. The used model took into account the number of patients, HER2+ prevalence, length and cost of treatment, and the effectiveness of the therapy. Probabilistic sensitivity analysis and alternative case scenarios were performed to ensure the robustness of the results. Introduction of adjuvant trastuzumab caused substantial costs for a relatively small hospital district. In base-case analysis the 4-year net budget impact was 1.3 million euro. The trastuzumab acquisition costs were partially offset by the reduction in costs associated with the treatment of cancer recurrence and metastatic disease. Budget impact analyses provide important information about the overall economic impact of new treatments, and thus offer complementary information to cost-effectiveness analyses. Inclusion of treatment outcomes and probabilistic sensitivity analysis provides more realistic estimates of the net budget impact. The length of trastuzumab treatment has a strong effect on the budget impact.

Improving a web-based employability intervention for work-disabled employees: results of a pilot economic evaluation.

PubMed

Noben, Cindy; Evers, Silvia; Genabeek, Joost van; Nijhuis, Frans; de Rijk, Angelique

2017-04-01

Purpose The purpose of this study is to improve web-based employability interventions for employees with work-related health problems for both intervention content and study design by means of a pilot economic evaluation. Methods Uptake rate analysis for the intervention elements, cost effectiveness, cost utility and subgroup analyses were conducted to identify potential content-related intervention improvements. Differences in work ability and quality-adjusted life years and overall contribution of resource items to the total costs were assessed. These were used to guide study design improvements. Results Sixty-three participants were a-select allocated to either the intervention (n = 29) or the control (n = 34) group. Uptake regarding the intervention elements ranged between 3% and 70%. Cost-effectiveness and cost-utility analyses resulted in negative effects although higher total costs. Incremental effects were marginal (work ability -0.51; QALY -0.01). Conclusions The web-based tool to enhance employability among work disabled employees requires improvements regarding targeting and intensity; outcome measures selected and collection of cost data. With respect to the studies of disability and rehabilitation, the findings and methods presented in this pilot economic evaluation could guide the assessment of future assistive "e-health" technologies. IMPLICATIONS FOR REHABILITATION The methods presented in this pilot economic evaluation have large potentials to guide the assessment of future assistive e-health technologies addressing work-disabilities. The findings show that the web-based tool requires content related improvements with respect to targeting and intensity to enhance employability among work disabled employees. The findings show that the web-based tool would benefit from improvements related to the study design by more adequately selecting and collecting both outcome measures and cost data. The burden attributable to large-scale studies and implementation issues were prevented as the outcomes of the pilot economic evaluation did not support the implementation of the web-based tool.

Opti-Tool: EPA Region 1's Stormwater Management Optimization Tool

EPA Pesticide Factsheets

Opti-Tool assists stormwater managers & consulting engineers in preparing technically sound & cost-effective watershed SW mgmt plans to achieve needed pollutant & volume reductions more affordably from developed landscapes throughout the New England Region

Cost-effective cloud computing: a case study using the comparative genomics tool, roundup.

PubMed

Kudtarkar, Parul; Deluca, Todd F; Fusaro, Vincent A; Tonellato, Peter J; Wall, Dennis P

2010-12-22

Comparative genomics resources, such as ortholog detection tools and repositories are rapidly increasing in scale and complexity. Cloud computing is an emerging technological paradigm that enables researchers to dynamically build a dedicated virtual cluster and may represent a valuable alternative for large computational tools in bioinformatics. In the present manuscript, we optimize the computation of a large-scale comparative genomics resource-Roundup-using cloud computing, describe the proper operating principles required to achieve computational efficiency on the cloud, and detail important procedures for improving cost-effectiveness to ensure maximal computation at minimal costs. Utilizing the comparative genomics tool, Roundup, as a case study, we computed orthologs among 902 fully sequenced genomes on Amazon's Elastic Compute Cloud. For managing the ortholog processes, we designed a strategy to deploy the web service, Elastic MapReduce, and maximize the use of the cloud while simultaneously minimizing costs. Specifically, we created a model to estimate cloud runtime based on the size and complexity of the genomes being compared that determines in advance the optimal order of the jobs to be submitted. We computed orthologous relationships for 245,323 genome-to-genome comparisons on Amazon's computing cloud, a computation that required just over 200 hours and cost $8,000 USD, at least 40% less than expected under a strategy in which genome comparisons were submitted to the cloud randomly with respect to runtime. Our cost savings projections were based on a model that not only demonstrates the optimal strategy for deploying RSD to the cloud, but also finds the optimal cluster size to minimize waste and maximize usage. Our cost-reduction model is readily adaptable for other comparative genomics tools and potentially of significant benefit to labs seeking to take advantage of the cloud as an alternative to local computing infrastructure.

Critical analysis of economic tools and economic measurement applied to rheumatoid arthritis.

PubMed

Her, Minyoung; Kavanaugh, Arthur

2012-01-01

Rheumatoid arthritis (RA) is chronic, progressive systemic inflammatory disease that if uncontrolled may lead to significant joint damage, dysfunction, work disability and other sequelae that result in large economic losses. A rich literature estimating the economic burden of RA, has been intensified recently, driven by costly biologic agents that have had a notable effect improving the outcomes of patients with RA. In order to optimally assess the value of therapies, it is best to take a comprehensive approach, considering all related costs of illness. This includes direct costs (e.g. the costs of the medications themselves and the monitoring required), indirect costs (e.g. loss of productivity, such as employment due to uncontrolled disease) and intangible cost (e.g. effects on pain and quality of life). Indirect costs constitute a substantial part of total cost in the patient with RA. In order to help assess the impact of RA on productivity, various tools for measuring productive loss like absenteeism and presenteeism have been introduced. No single tool reflects the entire spectrum of the productive loss clearly, as other factors such as use of a human capital approach or friction cost approach affect the valuation of productive loss monetarily. Although favourable outcomes are achieved with the use of biologic agents, their higher acquisition costs, as compared to traditional disease-modifying anti-rheumatic drugs (DMARDs) remain a barrier to their use. Assessments of the cost effectiveness of novel therapies are critically important, but published results have been contradictory, in some measure due to the heterogeneity of instruments utilised. While the various instruments appear to be valid and reliable, correlations between instruments has been modest, driven by factors such as differences in recall times, attribution and other confounders.

Discovery and New Frontiers Project Budget Analysis Tool

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn E.

2011-01-01

The Discovery and New Frontiers (D&NF) programs are multi-project, uncoupled programs that currently comprise 13 missions in phases A through F. The ability to fly frequent science missions to explore the solar system is the primary measure of program success. The program office uses a Budget Analysis Tool to perform "what-if" analyses and compare mission scenarios to the current program budget, and rapidly forecast the programs ability to meet their launch rate requirements. The tool allows the user to specify the total mission cost (fixed year), mission development and operations profile by phase (percent total mission cost and duration), launch vehicle, and launch date for multiple missions. The tool automatically applies inflation and rolls up the total program costs (in real year dollars) for comparison against available program budget. Thus, the tool allows the user to rapidly and easily explore a variety of launch rates and analyze the effect of changes in future mission or launch vehicle costs, the differing development profiles or operational durations of a future mission, or a replan of a current mission on the overall program budget. Because the tool also reports average monthly costs for the specified mission profile, the development or operations cost profile can easily be validate against program experience for similar missions. While specifically designed for predicting overall program budgets for programs that develop and operate multiple missions concurrently, the basic concept of the tool (rolling up multiple, independently-budget lines) could easily be adapted to other applications.

Conducting systematic reviews of economic evaluations.

PubMed

Gomersall, Judith Streak; Jadotte, Yuri Tertilus; Xue, Yifan; Lockwood, Suzi; Riddle, Dru; Preda, Alin

2015-09-01

In 2012, a working group was established to review and enhance the Joanna Briggs Institute (JBI) guidance for conducting systematic review of evidence from economic evaluations addressing a question(s) about health intervention cost-effectiveness. The objective is to present the outcomes of the working group. The group conducted three activities to inform the new guidance: review of literature on the utility/futility of systematic reviews of economic evaluations and consideration of its implications for updating the existing methodology; assessment of the critical appraisal tool in the existing guidance against criteria that promotes validity in economic evaluation research and two other commonly used tools; and a workshop. The debate in the literature on the limitations/value of systematic review of economic evidence cautions that systematic reviews of economic evaluation evidence are unlikely to generate one size fits all answers to questions about the cost-effectiveness of interventions and their comparators. Informed by this finding, the working group adjusted the framing of the objectives definition in the existing JBI methodology. The shift is away from defining the objective as to determine one cost-effectiveness measure toward summarizing study estimates of cost-effectiveness and informed by consideration of the included study characteristics (patient, setting, intervention component, etc.), identifying conditions conducive to lowering costs and maximizing health benefits. The existing critical appraisal tool was included in the new guidance. The new guidance includes the recommendation that a tool designed specifically for the purpose of appraising model-based studies be used together with the generic appraisal tool for economic evaluations assessment to evaluate model-based evaluations. The guidance produced by the group offers reviewers guidance for each step of the systematic review process, which are the same steps followed in JBI reviews of other types of evidence. The updated JBI guidance will be useful for researchers wanting to synthesize evidence about economic questions, either as stand-alone reviews or part of comprehensive or mixed method evidence reviews. Although the updated methodology produced by the work of the working group has improved the JBI guidance for systematic reviews of economic evaluations, there are areas where further work is required. These include adjusting the critical appraisal tool to separate out questions addressing intervention cost and effectiveness measurement; providing more explicit guidance for assessing generalizability of findings; and offering a more robust method for evidence synthesis that facilitates achieving the more ambitious review objectives.

A systematic review of cost-effectiveness analyses of complex wound interventions reveals optimal treatments for specific wound types.

PubMed

Tricco, Andrea C; Cogo, Elise; Isaranuwatchai, Wanrudee; Khan, Paul A; Sanmugalingham, Geetha; Antony, Jesmin; Hoch, Jeffrey S; Straus, Sharon E

2015-04-22

Complex wounds present a substantial economic burden on healthcare systems, costing billions of dollars annually in North America alone. The prevalence of complex wounds is a significant patient and societal healthcare concern and cost-effective wound care management remains unclear. This article summarizes the cost-effectiveness of interventions for complex wound care through a systematic review of the evidence base. We searched multiple databases (MEDLINE, EMBASE, Cochrane Library) for cost-effectiveness studies that examined adults treated for complex wounds. Two reviewers independently screened the literature, abstracted data from full-text articles, and assessed methodological quality using the Drummond 10-item methodological quality tool. Incremental cost-effectiveness ratios were reported, or, if not reported, calculated and converted to United States Dollars for the year 2013. Overall, 59 cost-effectiveness analyses were included; 71% (42 out of 59) of the included studies scored 8 or more points on the Drummond 10-item checklist tool. Based on these, 22 interventions were found to be more effective and less costly (i.e., dominant) compared to the study comparators: 9 for diabetic ulcers, 8 for venous ulcers, 3 for pressure ulcers, 1 for mixed venous and venous/arterial ulcers, and 1 for mixed complex wound types. Our results can be used by decision-makers in maximizing the deployment of clinically effective and resource efficient wound care interventions. Our analysis also highlights specific treatments that are not cost-effective, thereby indicating areas of resource savings. Please see related article: http://dx.doi.org/10.1186/s12916-015-0288-5.

A Cost-Effectiveness/Benefit Analysis Model for Postsecondary Vocational Programs. Technical Report.

ERIC Educational Resources Information Center

Kim, Jin Eun

A cost-effectiveness/benefit analysis is defined as a technique for measuring the outputs of existing and new programs in relation to their specified program objectives, against the costs of those programs. In terms of its specific use, the technique is conceptualized as a systems analysis method, an evaluation method, and a planning tool for…

Approaches to the Analysis of School Costs, an Introduction.

ERIC Educational Resources Information Center

Payzant, Thomas

A review and general discussion of quantitative and qualitative techniques for the analysis of economic problems outside of education is presented to help educators discover new tools for planning, allocating, and evaluating educational resources. The pamphlet covers some major components of cost accounting, cost effectiveness, cost-benefit…

A systematic review of the cost and cost-effectiveness of electronic discharge communications

PubMed Central

Sevick, Laura K; Esmail, Rosmin; Tang, Karen; Lorenzetti, Diane L; Ronksley, Paul; James, Matthew; Santana, Maria; Ghali, William A; Clement, Fiona

2017-01-01

Background The transition between acute care and community care can be a vulnerable period in a patients’ treatment due to the potential for postdischarge adverse events. The vulnerability of this period has been attributed to factors related to the miscommunication between hospital-based and community-based physicians. Electronic discharge communication has been proposed as one solution to bridge this communication gap. Prior to widespread implementation of these tools, the costs and benefits should be considered. Objective To establish the cost and cost-effectiveness of electronic discharge communications compared with traditional discharge systems for individuals who have completed care with one provider and are transitioning care to a new provider. Methods We conducted a systematic review of the published literature, using best practices, to identify economic evaluations/cost analyses of electronic discharge communication tools. Inclusion criteria were: (1) economic analysis and (2) electronic discharge communication tool as the intervention. Quality of each article was assessed, and data were summarised using a component-based analysis. Results One thousand unique abstracts were identified, and 57 full-text articles were assessed for eligibility. Four studies met final inclusion criteria. These studies varied in their primary objectives, methodology, costs reported and outcomes. All of the studies were of low to good quality. Three of the studies reported a cost-effectiveness measure ranging from an incremental daily cost of decreasing average discharge note completion by 1 day of $0.331 (2003 Canadian), a cost per page per discharge letter of €9.51 and a dynamic net present value of €31.1 million for a 5-year implementation of the intervention. None of the identified studies considered clinically meaningful patient or quality outcomes. Discussion Economic analyses of electronic discharge communications are scarcely reported, and with inconsistent methodology and outcomes. Further studies are needed to understand the cost-effectiveness and value for patient care. PMID:28674136

The Effect of Infrastructure Sharing in Estimating Operations Cost of Future Space Transportation Systems

NASA Technical Reports Server (NTRS)

Sundaram, Meenakshi

2005-01-01

NASA and the aerospace industry are extremely serious about reducing the cost and improving the performance of launch vehicles both manned or unmanned. In the aerospace industry, sharing infrastructure for manufacturing more than one type spacecraft is becoming a trend to achieve economy of scale. An example is the Boeing Decatur facility where both Delta II and Delta IV launch vehicles are made. The author is not sure how Boeing estimates the costs of each spacecraft made in the same facility. Regardless of how a contractor estimates the cost, NASA in its popular cost estimating tool, NASA Air force Cost Modeling (NAFCOM) has to have a method built in to account for the effect of infrastructure sharing. Since there is no provision in the most recent version of NAFCOM2002 to take care of this, it has been found by the Engineering Cost Community at MSFC that the tool overestimates the manufacturing cost by as much as 30%. Therefore, the objective of this study is to develop a methodology to assess the impact of infrastructure sharing so that better operations cost estimates may be made.

Watershed Management Optimization Support Tool v3

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context that is, accou...

Improving the Efficiency and Quality of the Value Assessment Process for Companion Diagnostic Tests: The Companion test Assessment Tool (CAT).

PubMed

Canestaro, William J; Pritchard, Daryl E; Garrison, Louis P; Dubois, Robert; Veenstra, David L

2015-08-01

Companion diagnostic tests (CDTs) have emerged as a vital technology in the effective use of an increasing number of targeted drug therapies. Although CDTs can offer a multitude of potential benefits, assessing their value within a health technology appraisal process can be challenging because of a complex array of factors that influence clinical and economic outcomes. To develop a user-friendly tool to assist managed care and other health care decision makers in screening companion tests and determining whether an intensive technology review is necessary and, if so, where the review should be focused to improve efficiency. First, we conducted a systematic literature review of CDT cost-effectiveness studies to identify value drivers. Second, we conducted key informant interviews with a diverse group of stakeholders to elicit feedback and solicit any additional value drivers and identify desirable attributes for an evidence review tool. A draft tool was developed based on this information that captured value drivers, usability features, and had a particular focus on practical use by nonexperts. Finally, the tool was pilot tested with test developers and managed care evidence evaluators to assess face-validity and usability. The tool was also evaluated using several diverse examples of existing companion diagnostics and refined accordingly. We identified 65 cost-effectiveness studies of companion diagnostic technologies. The following factors were most commonly identified as value drivers from our literature review: clinical validity of testing; efficacy, safety, and cost of baseline and alternative treatments; cost and mortality of health states; and biomarker prevalence and testing cost. Stakeholders identified the following additional factors that they believed influenced the overall value of a companion test: regulatory status, actionability, utility, and market penetration. These factors were used to maximize the efficiency of the evidence review process. Stakeholders also stated that a tool should be easy to use and time efficient. Cognitive interviews with stakeholders led to minor changes in the draft tool to improve usability and relevance. The final tool consisted of 4 sections: (1) eligibility for review (2 questions), (2) prioritization of review (3 questions), (3) clinical review (3 questions), and (4) economic review (5 questions). Although the evaluation of CDTs can be challenging because of limited evidence and the added complexity of incorporating a diagnostic test into drug treatment decisions, using a pragmatic tool to identify tests that do not need extensive evaluation may improve the efficiency and effectiveness of CDT value assessments.

Watershed Management Optimization Support Tool (WMOST) v3: User Guide

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context that is, accou...

Watershed Management Optimization Support Tool (WMOST) v3: Theoretical Documentation

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context, accounting fo...

Low Cost Injection Mold Creation via Hybrid Additive and Conventional Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dehoff, Ryan R.; Watkins, Thomas R.; List, III, Frederick Alyious

2015-12-01

The purpose of the proposed project between Cummins and ORNL is to significantly reduce the cost of the tooling (machining and materials) required to create injection molds to make plastic components. Presently, the high cost of this tooling forces the design decision to make cast aluminum parts because Cummins typical production volumes are too low to allow injection molded plastic parts to be cost effective with the amortized cost of the injection molding tooling. In addition to reducing the weight of components, polymer injection molding allows the opportunity for the alternative cooling methods, via nitrogen gas. Nitrogen gas cooling offersmore » an environmentally and economically attractive cooling option, if the mold can be manufactured economically. In this project, a current injection molding design was optimized for cooling using nitrogen gas. The various components of the injection mold tooling were fabricated using the Renishaw powder bed laser additive manufacturing technology. Subsequent machining was performed on the as deposited components to form a working assembly. The injection mold is scheduled to be tested in a projection setting at a commercial vendor selected by Cummins.« less

Financing Alternatives Comparison Tool

EPA Pesticide Factsheets

FACT is a financial analysis tool that helps identify the most cost-effective method to fund a wastewater or drinking water management project. It produces a comprehensive analysis that compares various financing options.

Solutions to Address Diabetes-Related Financial Burden and Cost-Related Nonadherence: Results From a Pilot Study.

PubMed

Patel, Minal R; Resnicow, Kenneth; Lang, Ian; Kraus, Kathleen; Heisler, Michele

2018-02-01

Cost-related nonadherence (CRN) to recommended self-management behaviors among adults with chronic conditions such as diabetes is prevalent. Few behavioral interventions to mitigate CRN have been tested and evaluated. We developed a financial burden resource tool and examined its acceptability and the preliminary effects on patient-centered outcomes among adults with diabetes or prediabetes seen in a clinical setting. We report a pre-post one-group design pilot study. From an endocrinology clinic, we recruited 104 adults with diabetes who reported financial burdens with their diabetes management or engaged in CRN behaviors. We offered participants the financial burden resource tool we developed, which provided tailored, low-cost resource options for diabetes management and other social needs. Acceptability and self-reported outcomes were assessed 2 months after use of the tool. Mean age of participants was 50.5 years ( SD = 15.3). Participants found the tool highly acceptable across 15 indicators (e.g., 93% "learned a lot," 98% "topics relevant" 95% "applicable to their lives," 98% "liked the information"). Significant improvements between baseline and 2-month follow-up were observed for discussion of cost concerns with nurses (19% to 29%, p < .05) and pharmacists (13% to 25.5%, p < .01), not skipping doses of medicines due to cost (11% to 4%, p < .03), and financial management (33.83 to 39.62, p < .007). There were no significant changes in perception of financial burden. A financial burden resource tool is highly acceptable to patients, is easy to administer, and can prompt behavior change. This pilot study supports the need for well-powered trials with longer follow-up to further evaluate the effectiveness of such tools in improving CRN and key outcomes.

Solutions to Address Diabetes-Related Financial Burden and Cost-Related Nonadherence: Results From a Pilot Study

PubMed Central

Patel, Minal R.; Resnicow, Kenneth; Lang, Ian; Kraus, Kathleen; Heisler, Michele

2018-01-01

Background Cost-related nonadherence (CRN) to recommended self-management behaviors among adults with chronic conditions such as diabetes is prevalent. Few behavioral interventions to mitigate CRN have been tested and evaluated. Aims We developed a financial burden resource tool and examined its acceptability and the preliminary effects on patient-centered outcomes among adults with diabetes or prediabetes seen in a clinical setting. Method We report a pre–post one-group design pilot study. From an endocrinology clinic, we recruited 104 adults with diabetes who reported financial burdens with their diabetes management or engaged in CRN behaviors. We offered participants the financial burden resource tool we developed, which provided tailored, low-cost resource options for diabetes management and other social needs. Acceptability and self-reported outcomes were assessed 2 months after use of the tool. Results Mean age of participants was 50.5 years (SD = 15.3). Participants found the tool highly acceptable across 15 indicators (e.g., 93% “learned a lot,” 98% “topics relevant” 95% “applicable to their lives,” 98% “liked the information”). Significant improvements between baseline and 2-month followup were observed for discussion of cost concerns with nurses (19% to 29%, p < .05) and pharmacists (13% to 25.5%, p < .01), not skipping doses of medicines due to cost (11% to 4%, p < .03), and financial management (33.83 to 39.62, p < .007). There were no significant changes in perception of financial burden. Conclusion A financial burden resource tool is highly acceptable to patients, is easy to administer, and can prompt behavior change. This pilot study supports the need for well-powered trials with longer follow-up to further evaluate the effectiveness of such tools in improving CRN and key outcomes. PMID:28443371

Optimizing community case management strategies to achieve equitable reduction of childhood pneumonia mortality: An application of Equitable Impact Sensitive Tool (EQUIST) in five low- and middle-income countries.

PubMed

Waters, Donald; Theodoratou, Evropi; Campbell, Harry; Rudan, Igor; Chopra, Mickey

2012-12-01

The aim of this study was to populate the Equitable Impact Sensitive Tool (EQUIST) framework with all necessary data and conduct the first implementation of EQUIST in studying cost-effectiveness of community case management of childhood pneumonia in 5 low- and middle-income countries with relation to equity impact. Wealth quintile-specific data were gathered or modelled for all contributory determinants of the EQUIST framework, namely: under-five mortality rate, cost of intervention, intervention effectiveness, current coverage of intervention and relative disease distribution. These were then combined statistically to calculate the final outcome of the EQUIST model for community case management of childhood pneumonia: US$ per life saved, in several different approaches to scaling-up. The current 'mainstream' approach to scaling-up of interventions is never the most cost-effective. Community-case management appears to strongly support an 'equity-promoting' approach to scaling-up, displaying the highest levels of cost-effectiveness in interventions targeted at the poorest quintile of each study country, although absolute cost differences vary by context. The relationship between cost-effectiveness and equity impact is complex, with many determinants to consider. One important way to increase intervention cost-effectiveness in poorer quintiles is to improve the efficiency and quality of delivery. More data are needed in all areas to increase the accuracy of EQUIST-based estimates.

The Cost-Effectiveness of an Intensive Treatment Protocol for Severe Dyslexia in Children

ERIC Educational Resources Information Center

Hakkaart-van Roijen, Leona; Goettsch, Wim G.; Ekkebus, Michel; Gerretsen, Patty; Stolk, Elly A.

2011-01-01

Studies of interventions for dyslexia have focused entirely on outcomes related to literacy. In this study, we considered a broader picture assessing improved quality of life compared with costs. A model served as a tool to compare costs and effects of treatment according to a new protocol and care as usual. Quality of life was measured and valued…

Cost-effectiveness of cell saver in short-segment lumbar laminectomy and fusion (≤3 levels).

PubMed

Kelly, Patrick D; Parker, Scott L; Mendenhall, Stephen K; Bible, Jesse E; Sivasubramaniam, Priya; Shau, David N; McGirt, Matthew J; Devin, Clinton J

2015-09-01

Mixed retrospective-prospective cohort study. To characterize practice patterns for the use of Cell Saver at our institution, investigate its cost-effectiveness, and propose a new tool for patient selection. Blood loss is an exceedingly common complication of spine surgery, and Cell Saver intraoperative cell salvage has been used to decrease reliance on allogeneic blood transfusions for blood volume replacement. The cost-effectiveness of Cell Saver has not been established for lumbar spinal surgery, and no universal guidelines exist for clinicians to decide when to utilize this tool. Other authors have proposed cutoffs for anticipated blood loss volumes which indicate that Cell Saver should be used. Five hundred and eight patients undergoing lumbar laminectomy in 3 or fewer levels were reviewed from our prospective spinal outcomes registry. Cost information for Cell Saver and allogeneic transfusions was collected from our institution's billing and collections department. Logistic regression was used to identify patient characteristics associated with use of Cell Saver. An incremental cost effectiveness ratio was calculated based on transfusion and cost data. A clinical prediction score was derived using logistic regression. Use of Cell Saver correlated with increased age, higher body mass index, diabetes, greater American Society of Anesthesiologists classification, and greater number of previous spine surgeries. Outcomes for patients who did and did not have Cell Saver set up intraoperatively were equivocal. Cell Saver was not cost effective based on current usage patterns, but may become cost effective if used for patients with high expected blood loss. A simple clinical prediction rule is proposed which may aid in selection of patients to have Cell Saver present intraoperatively. Cell Saver is not a cost-effective intervention but may become cost effective if a threshold of expected intraoperative blood loss is used to select patients more judiciously. 3.

Assessment and Educational Policy.

ERIC Educational Resources Information Center

Smith, Virginia B.

1975-01-01

Because of increased access of postsecondary education in the 1950's and 1960's, higher education cost analysis gained importance. Attempts have been made to develop a standard unit cost, but it is hard to see unit cost accounting by itself as a valuable tool for public accountability or policy making. For these purposes a cost-effectiveness ratio…

THE APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON SEQUESTRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2002-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research projects is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Allogeneic cell therapy bioprocess economics and optimization: downstream processing decisions.

PubMed

Hassan, Sally; Simaria, Ana S; Varadaraju, Hemanthram; Gupta, Siddharth; Warren, Kim; Farid, Suzanne S

2015-01-01

To develop a decisional tool to identify the most cost effective process flowsheets for allogeneic cell therapies across a range of production scales. A bioprocess economics and optimization tool was built to assess competing cell expansion and downstream processing (DSP) technologies. Tangential flow filtration was generally more cost-effective for the lower cells/lot achieved in planar technologies and fluidized bed centrifugation became the only feasible option for handling large bioreactor outputs. DSP bottlenecks were observed at large commercial lot sizes requiring multiple large bioreactors. The DSP contribution to the cost of goods/dose ranged between 20-55%, and 50-80% for planar and bioreactor flowsheets, respectively. This analysis can facilitate early decision-making during process development.

Integrated Watershed Management using the Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

Integrated watershed management is an effective planning strategy to balance tradeoffs between competing water uses within a watershed. WMOST is an Excel-based decision tool to aid planners in making cost effective decisions that meet water quantity and quality regulations. WMOST...

WMOST 2.0 Download Page

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of managemen

WMOST 3.0 Download Page

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management.

The Production Effect: Costs and Benefits in Free Recall

ERIC Educational Resources Information Center

Jones, Angela C.; Pyc, Mary A.

2014-01-01

The production effect, the memorial benefit for information read aloud versus silently, has been touted as a simple memory improvement tool. The current experiments were designed to evaluate the relative costs and benefits of production using a free recall paradigm. Results extend beyond prior work showing a production effect only when production…

"Red-Yellow-Green": Effect of an Initiative to Guide Surgeon Choice of Orthopaedic Implants.

PubMed

Okike, Kanu; Pollak, Rachael; O'Toole, Robert V; Pollak, Andrew N

2017-04-05

Orthopaedic procedures are expensive, and devices account for a large proportion of the overall costs. Hospitals have employed a variety of strategies to decrease implant costs, but many center on restricting surgeon choice. At our institution, we developed an implant selection tool that guides surgeons toward more cost-effective implants, while minimally restricting choice. The purpose of this study was to assess the effect of this tool on preferred implant usage rates, vendor attitudes toward pricing structure, and hospital implant expenditures. For 6 commonly used orthopaedic trauma devices, similar constructs were created for the 4 vendors used at our hospital, and the costs were determined. On the basis of these costs, the available options for each device type were categorized as "green" (preferred vendor), "yellow" (midrange), or "red" (used for patient-specific requirements). The "Red-Yellow-Green" chart was posted on the wall of each orthopaedic trauma operating room. To assess the effect of the tool, we compared implant usage patterns before and after implementation of the implant selection tool. We also assessed changes in vendor contract prices, as well as overall savings to our institution. Implant usage changed significantly from 30% "red," 56% "yellow," and 14% "green" prior to the intervention, to 9% "red," 21% "yellow," and 70% "green" after the intervention (p < 0.0001). As a result of price renegotiation with vendors following implementation, we observed average price decreases that ranged from 1.1% to 22.4%. Average expenditures on these 6 implants decreased 20% during the study period, which represented a savings of $216,495 per year. At our institution, we designed and implemented "Red-Yellow-Green," a simple tool that guides surgeons toward the selection of lower-cost implants without violating vendor confidentiality clauses, limiting the implants from which surgeons can choose, or requiring surgeons to discern the prices of complex constructs. Following implementation, hospital implant expenditures decreased as a result of a combination of increased preferred vendor usage by surgeons, as well as increased competition among vendors, which resulted in lower overall prices.

Development and Validation of the Texas Best Management Practice Evaluation Tool (TBET)

USDA-ARS?s Scientific Manuscript database

Conservation planners need simple yet accurate tools to predict sediment and nutrient losses from agricultural fields to guide conservation practice implementation and increase cost-effectiveness. The Texas Best management practice Evaluation Tool (TBET), which serves as an input/output interpreter...

Cost-Effectiveness of Wisconsin TEAM Model for Improving Adherence and Hypertension Control in Black Patients

PubMed Central

Shireman, Theresa I.; Svarstad, Bonnie L.

2016-01-01

Objective To assess the cost-effectiveness of the 6-month Team Education and Adherence Monitoring (TEAM) intervention for black patients with hypertension in community pharmacies using prospectively collected cost data. Design Cost-effectiveness analysis of a cluster-randomized trial. Setting 28 chain pharmacies in five Wisconsin cities from December 2006 to February 2009. Participants 576 black patients with uncontrolled hypertension Intervention Pharmacists and pharmacy technicians using novel tools for improving adherence and feedback to patients and physicians as compared to information only control group. Main outcome measure(s) Incremental cost analysis of variable costs from the pharmacy perspective captured prospectively at the participant level. Outcomes (effect measures) were 6-month refill adherence, changes in SBP and DBP, and proportion of patients achieving BP control. Results Mean cost of intervention personnel time and tools was $104.8± 45.2. Incremental variable costs per mmHg decrease in SBP and DBP were $22.2 ± 16.3 and $66.0 ± 228.4, respectively. The cost of helping one more person achieve the BP goal (< 140/90) was $665.2 ± 265.2; the cost of helping one more person achieve good refill adherence was $463.3 ± 110.7. Prescription drug costs were higher for the TEAM group ($392.8, SD = 396.3 versus $307.0, SD = 295.2, p = 0.02). The start-up cost for pharmacy furniture, equipment, and privacy screen was $168 per pharmacy. Conclusions Our randomized, practice based intervention demonstrated that community pharmacists can implement a cost-effective intervention to improve hypertension control in blacks. This approach imposes a nominal expense at the pharmacy level, can be integrated into the ongoing pharmacist-patient relationship, and can enhance clinical and behavioral outcomes. PMID:27184784

Cost-effective management alternatives for Snake River Chinook salmon: a biological-economic synthesis.

PubMed

Halsing, David L; Moore, Michael R

2008-04-01

The mandate to increase endangered salmon populations in the Columbia River Basin of North America has created a complex, controversial resource-management issue. We constructed an integrated assessment model as a tool for analyzing biological-economic trade-offs in recovery of Snake River spring- and summer-run chinook salmon (Oncorhynchus tshawytscha). We merged 3 frameworks: a salmon-passage model to predict migration and survival of smolts; an age-structured matrix model to predict long-term population growth rates of salmon stocks; and a cost-effectiveness analysis to determine a set of least-cost management alternatives for achieving particular population growth rates. We assessed 6 individual salmon-management measures and 76 management alternatives composed of one or more measures. To reflect uncertainty, results were derived for different assumptions of effectiveness of smolt transport around dams. Removal of an estuarine predator, the Caspian Tern (Sterna caspia), was cost-effective and generally increased long-term population growth rates regardless of transport effectiveness. Elimination of adult salmon harvest had a similar effect over a range of its cost estimates. The specific management alternatives in the cost-effective set depended on assumptions about transport effectiveness. On the basis of recent estimates of smolt transport effectiveness, alternatives that discontinued transportation or breached dams were prevalent in the cost-effective set, whereas alternatives that maximized transportation dominated if transport effectiveness was relatively high. More generally, the analysis eliminated 80-90% of management alternatives from the cost-effective set. Application of our results to salmon management is limited by data availability and model assumptions, but these limitations can help guide research that addresses critical uncertainties and information. Our results thus demonstrate that linking biology and economics through integrated models can provide valuable tools for science-based policy and management.

Cost-effective management alternatives for Snake river chinook salmon: A biological-economic synthesis

USGS Publications Warehouse

Halsing, D.L.; Moore, M.R.

2008-01-01

The mandate to increase endangered salmon populations in the Columbia River Basin of North America has created a complex, controversial resource-management issue. We constructed an integrated assessment model as a tool for analyzing biological-economic trade-offs in recovery of Snake River spring- and summer-run chinook salmon (Oncorhynchus tshawytscha). We merged 3 frameworks: a salmon-passage model to predict migration and survival of smolts; an age-structured matrix model to predict long-term population growth rates of salmon stocks; and a cost-effectiveness analysis to determine a set of least-cost management alternatives for achieving particular population growth rates. We assessed 6 individual salmon-management measures and 76 management alternatives composed of one or more measures. To reflect uncertainty, results were derived for different assumptions of effectiveness of smolt transport around dams. Removal of an estuarine predator, the Caspian Tern (Sterna caspia), was cost-effective and generally increased long-term population growth rates regardless of transport effectiveness. Elimination of adult salmon harvest had a similar effect over a range of its cost estimates. The specific management alternatives in the cost-effective set depended on assumptions about transport effectiveness. On the basis of recent estimates of smolt transport effectiveness, alternatives that discontinued transportation or breached dams were prevalent in the cost-effective set, whereas alternatives that maximized transportation dominated if transport effectiveness was relatively high. More generally, the analysis eliminated 80-90% of management alternatives from the cost-effective set. Application of our results to salmon management is limited by data availability and model assumptions, but these limitations can help guide research that addresses critical uncertainties and information. Our results thus demonstrate that linking biology and economics through integrated models can provide valuable tools for science-based policy and management.

Pathology economic model tool: a novel approach to workflow and budget cost analysis in an anatomic pathology laboratory.

PubMed

Muirhead, David; Aoun, Patricia; Powell, Michael; Juncker, Flemming; Mollerup, Jens

2010-08-01

The need for higher efficiency, maximum quality, and faster turnaround time is a continuous focus for anatomic pathology laboratories and drives changes in work scheduling, instrumentation, and management control systems. To determine the costs of generating routine, special, and immunohistochemical microscopic slides in a large, academic anatomic pathology laboratory using a top-down approach. The Pathology Economic Model Tool was used to analyze workflow processes at The Nebraska Medical Center's anatomic pathology laboratory. Data from the analysis were used to generate complete cost estimates, which included not only materials, consumables, and instrumentation but also specific labor and overhead components for each of the laboratory's subareas. The cost data generated by the Pathology Economic Model Tool were compared with the cost estimates generated using relative value units. Despite the use of automated systems for different processes, the workflow in the laboratory was found to be relatively labor intensive. The effect of labor and overhead on per-slide costs was significantly underestimated by traditional relative-value unit calculations when compared with the Pathology Economic Model Tool. Specific workflow defects with significant contributions to the cost per slide were identified. The cost of providing routine, special, and immunohistochemical slides may be significantly underestimated by traditional methods that rely on relative value units. Furthermore, a comprehensive analysis may identify specific workflow processes requiring improvement.

HUMAN HEALTH METRICS FOR ENVIRONMENTAL DECISION SUPPORT TOOLS: LESSONS FROM HEALTH ECONOMICS AND DECISION ANALYSIS

EPA Science Inventory

Decision makers using environmental decision support tools are often confronted with information that predicts a multitude of different human health effects due to environmental stressors. If these health effects need to be contrasted with costs or compared with alternative scena...

A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

NASA Technical Reports Server (NTRS)

Foreman, Veronica; Le Moigne, Jacqueline; de Weck, Oliver

2016-01-01

Satellite constellations present unique capabilities and opportunities to Earth orbiting and near-Earth scientific and communications missions, but also present new challenges to cost estimators. An effective and adaptive cost model is essential to successful mission design and implementation, and as Distributed Spacecraft Missions (DSM) become more common, cost estimating tools must become more representative of these types of designs. Existing cost models often focus on a single spacecraft and require extensive design knowledge to produce high fidelity estimates. Previous research has examined the shortcomings of existing cost practices as they pertain to the early stages of mission formulation, for both individual satellites and small satellite constellations. Recommendations have been made for how to improve the cost models for individual satellites one-at-a-time, but much of the complexity in constellation and DSM cost modeling arises from constellation systems level considerations that have not yet been examined. This paper constitutes a survey of the current state-of-the-art in cost estimating techniques with recommendations for improvements to increase the fidelity of future constellation cost estimates. To enable our investigation, we have developed a cost estimating tool for constellation missions. The development of this tool has revealed three high-priority weaknesses within existing parametric cost estimating capabilities as they pertain to DSM architectures: design iteration, integration and test, and mission operations. Within this paper we offer illustrative examples of these discrepancies and make preliminary recommendations for addressing them. DSM and satellite constellation missions are shifting the paradigm of space-based remote sensing, showing promise in the realms of Earth science, planetary observation, and various heliophysical applications. To fully reap the benefits of DSM technology, accurate and relevant cost estimating capabilities must exist; this paper offers insights critical to the future development and implementation of DSM cost estimating tools.

A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

NASA Technical Reports Server (NTRS)

Foreman, Veronica L.; Le Moigne, Jacqueline; de Weck, Oliver

2016-01-01

Satellite constellations present unique capabilities and opportunities to Earth orbiting and near-Earth scientific and communications missions, but also present new challenges to cost estimators. An effective and adaptive cost model is essential to successful mission design and implementation, and as Distributed Spacecraft Missions (DSM) become more common, cost estimating tools must become more representative of these types of designs. Existing cost models often focus on a single spacecraft and require extensive design knowledge to produce high fidelity estimates. Previous research has examined the limitations of existing cost practices as they pertain to the early stages of mission formulation, for both individual satellites and small satellite constellations. Recommendations have been made for how to improve the cost models for individual satellites one-at-a-time, but much of the complexity in constellation and DSM cost modeling arises from constellation systems level considerations that have not yet been examined. This paper constitutes a survey of the current state-of-theart in cost estimating techniques with recommendations for improvements to increase the fidelity of future constellation cost estimates. To enable our investigation, we have developed a cost estimating tool for constellation missions. The development of this tool has revealed three high-priority shortcomings within existing parametric cost estimating capabilities as they pertain to DSM architectures: design iteration, integration and test, and mission operations. Within this paper we offer illustrative examples of these discrepancies and make preliminary recommendations for addressing them. DSM and satellite constellation missions are shifting the paradigm of space-based remote sensing, showing promise in the realms of Earth science, planetary observation, and various heliophysical applications. To fully reap the benefits of DSM technology, accurate and relevant cost estimating capabilities must exist; this paper offers insights critical to the future development and implementation of DSM cost estimating tools.

User Guide for the Financing Alternatives Comparison Tool

EPA Pesticide Factsheets

FACT is a financial analysis tool that helps identify the most cost-effective method to fund a wastewater or drinking water management project. It creates a comprehensive analysis that compares various financing options.

Identifying Cost-Effective Water Resources Management Strategies: Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a public-domain software application designed to aid decision makers with integrated water resources management. The tool allows water resource managers and planners to screen a wide-range of management practices for c...

Construction Performance Optimization toward Green Building Premium Cost Based on Greenship Rating Tools Assessment with Value Engineering Method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Riswanto; Budiman, Rachmat

2017-07-01

Green building concept becomes important in current building life cycle to mitigate environment issues. The purpose of this paper is to optimize building construction performance towards green building premium cost, achieving green building rating tools with optimizing life cycle cost. Therefore, this study helps building stakeholder determining building fixture to achieve green building certification target. Empirically the paper collects data of green building in the Indonesian construction industry such as green building fixture, initial cost, operational and maintenance cost, and certification score achievement. After that, using value engineering method optimized green building fixture based on building function and cost aspects. Findings indicate that construction performance optimization affected green building achievement with increasing energy and water efficiency factors and life cycle cost effectively especially chosen green building fixture.

Cost-Effective Cloud Computing: A Case Study Using the Comparative Genomics Tool, Roundup

PubMed Central

Kudtarkar, Parul; DeLuca, Todd F.; Fusaro, Vincent A.; Tonellato, Peter J.; Wall, Dennis P.

2010-01-01

Background Comparative genomics resources, such as ortholog detection tools and repositories are rapidly increasing in scale and complexity. Cloud computing is an emerging technological paradigm that enables researchers to dynamically build a dedicated virtual cluster and may represent a valuable alternative for large computational tools in bioinformatics. In the present manuscript, we optimize the computation of a large-scale comparative genomics resource—Roundup—using cloud computing, describe the proper operating principles required to achieve computational efficiency on the cloud, and detail important procedures for improving cost-effectiveness to ensure maximal computation at minimal costs. Methods Utilizing the comparative genomics tool, Roundup, as a case study, we computed orthologs among 902 fully sequenced genomes on Amazon’s Elastic Compute Cloud. For managing the ortholog processes, we designed a strategy to deploy the web service, Elastic MapReduce, and maximize the use of the cloud while simultaneously minimizing costs. Specifically, we created a model to estimate cloud runtime based on the size and complexity of the genomes being compared that determines in advance the optimal order of the jobs to be submitted. Results We computed orthologous relationships for 245,323 genome-to-genome comparisons on Amazon’s computing cloud, a computation that required just over 200 hours and cost $8,000 USD, at least 40% less than expected under a strategy in which genome comparisons were submitted to the cloud randomly with respect to runtime. Our cost savings projections were based on a model that not only demonstrates the optimal strategy for deploying RSD to the cloud, but also finds the optimal cluster size to minimize waste and maximize usage. Our cost-reduction model is readily adaptable for other comparative genomics tools and potentially of significant benefit to labs seeking to take advantage of the cloud as an alternative to local computing infrastructure. PMID:21258651

The Science of and Advanced Technology for Cost-Effective Manufacture of High Precision Engineering Products. Volume 4. Thermal Effects on the Accuracy of Numerically Controlled Machine Tools.

DTIC Science & Technology

1985-10-01

83K0385 FINAL REPORT D Vol. 4 00 THERMAL EFFECTS ON THE ACCURACY OF LD NUME" 1ICALLY CONTROLLED MACHINE TOOLS PREPARED BY I Raghunath Venugopal and M...OF NUMERICALLY CONTROLLED MACHINE TOOLS 12 PERSONAL AJ’HOR(S) Venunorial, Raghunath and M. M. Barash 13a TYPE OF REPORT 13b TIME COVERED 14 DATE OF...TOOLS Prepared by Raghunath Venugopal and M. M. Barash Accesion For Unannounced 0 Justification ........................................... October 1085

Cost-effectiveness analysis and HIV screening: the emergency medicine perspective.

PubMed

Hsu, Heather; Walensky, Rochelle P

2011-07-01

Cost-effectiveness analysis is a useful tool for decisionmakers charged with prioritizing of the myriad medical interventions in the emergency department (ED). This analytic approach may be especially helpful for ranking programs that are competing for scarce resources while attempting to maximize net health benefits. In this article, we review the health economics literature on HIV screening in EDs and introduce the methods of cost-effectiveness analysis for medical interventions. We specifically describe the incremental cost-effectiveness ratio--its calculation, the derivation of ratio components, and the interpretation of these ratios. Copyright © 2011. Published by Mosby, Inc.

Multimedia Instructional Tools' Impact on Student Motivation and Learning Strategies in Computer Applications Courses

ERIC Educational Resources Information Center

Chapman, Debra; Wang, Shuyan

2015-01-01

Multimedia instructional tools (MMIT) have been identified as a way effectively and economically present instructional material. MMITs are commonly used in introductory computer applications courses as MMITs should be effective in increasing student knowledge and positively impact motivation and learning strategies, without increasing costs. This…

Tips and Tools for Creating eNewsletters

ERIC Educational Resources Information Center

Walker, Tim

2006-01-01

An electronic newsletter, or "eNewsletter" for short, is a cost-effective informational publication typically distributed weekly or monthly using e-mail. If properly implemented, it can become an effective customer service tool, providing an opportunity to share information with children, parents, and families. It can also serve as a powerful…

75 FR 27552 - Guidance for Federal Land Management in the Chesapeake Bay Watershed

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

... effective tools and practices available to reduce water pollution from a variety of nonpoint sources... describe ``proven cost-effective tools and practices that reduce water pollution'' that are appropriate to...: Katie Flahive, USEPA, Office of Water, Office of Wetlands, Oceans and Watersheds, 1200 Pennsylvania Ave...

A Project Selection Tool for the State of Rhode Island

EPA Pesticide Factsheets

EPA worked with the state of Rhode Island to develop a project selection tool to help funding agencies review a proposed project across six categories that contribute to its sustainability and cost-effectiveness.

PROTOTYPE TOOL FOR EVALUATING THE COST AND EFFECTIVENESS OF GREENHOUSE GAS MITIGATION TECHNOLOGIES

EPA Science Inventory

The paper introduces the structure of a tool, being developed by the U.S. EPA's Office of Research and Development, that will be able to analyze the benefits of new technologies and strategies for controlling greenhouse gas (GHG) emissions. When completed, the tool will be able ...

Cardiovascular Disease Screening By Community Health Workers Can Be Cost-Effective In Low-Resource Countries

PubMed Central

Gaziano, Thomas; Abrahams-Gessel, Shafika; Surka, Sam; Sy, Stephen; Pandya, Ankur; Denman, Catalina A.; Mendoza, Carlos; Puoane, Thandi; Levitt, Naomi S.

2016-01-01

In low-resource settings, a physician is not always available. We recently demonstrated that community health workers—instead of physicians or nurses—can efficiently screen adults for cardiovascular disease in South Africa, Mexico, and Guatemala. In this analysis we sought to determine the health and economic impacts of shifting this screening to community health workers equipped with either a paper-based or a mobile phone–based screening tool. We found that screening by community health workers was very cost-effective or even cost-saving in all three countries, compared to the usual clinic-based screening. The mobile application emerged as the most cost-effective strategy because it could save more lives than the paper tool at minimal extra cost. Our modeling indicated that screening by community health workers, combined with improved treatment rates, would increase the number of deaths averted from 15,000 to 110,000, compared to standard care. Policy makers should promote greater acceptance of community health workers by both national populations and health professionals and should increase their commitment to treating cardiovascular disease and making medications available. PMID:26355056

A systematic review of the cost and cost-effectiveness of electronic discharge communications.

PubMed

Sevick, Laura K; Esmail, Rosmin; Tang, Karen; Lorenzetti, Diane L; Ronksley, Paul; James, Matthew; Santana, Maria; Ghali, William A; Clement, Fiona

2017-07-02

The transition between acute care and community care can be a vulnerable period in a patients' treatment due to the potential for postdischarge adverse events. The vulnerability of this period has been attributed to factors related to the miscommunication between hospital-based and community-based physicians. Electronic discharge communication has been proposed as one solution to bridge this communication gap. Prior to widespread implementation of these tools, the costs and benefits should be considered. To establish the cost and cost-effectiveness of electronic discharge communications compared with traditional discharge systems for individuals who have completed care with one provider and are transitioning care to a new provider. We conducted a systematic review of the published literature, using best practices, to identify economic evaluations/cost analyses of electronic discharge communication tools. Inclusion criteria were: (1) economic analysis and (2) electronic discharge communication tool as the intervention. Quality of each article was assessed, and data were summarised using a component-based analysis. One thousand unique abstracts were identified, and 57 full-text articles were assessed for eligibility. Four studies met final inclusion criteria. These studies varied in their primary objectives, methodology, costs reported and outcomes. All of the studies were of low to good quality. Three of the studies reported a cost-effectiveness measure ranging from an incremental daily cost of decreasing average discharge note completion by 1 day of $0.331 (2003 Canadian), a cost per page per discharge letter of €9.51 and a dynamic net present value of €31.1 million for a 5-year implementation of the intervention. None of the identified studies considered clinically meaningful patient or quality outcomes. Economic analyses of electronic discharge communications are scarcely reported, and with inconsistent methodology and outcomes. Further studies are needed to understand the cost-effectiveness and value for patient care. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A Web-based cost-effective training tool with possible application to brain injury rehabilitation.

PubMed

Wang, Peijun; Kreutzer, Ina Anna; Bjärnemo, Robert; Davies, Roy C

2004-06-01

Virtual reality (VR) has provoked enormous interest in the medical community. In particular, VR offers therapists new approaches for improving rehabilitation effects. However, most of these VR assistant tools are not very portable, extensible or economical. Due to the vast amount of 3D data, they are not suitable for Internet transfer. Furthermore, in order to run these VR systems smoothly, special hardware devices are needed. As a result, existing VR assistant tools tend to be available in hospitals but not in patients' homes. To overcome these disadvantages, as a case study, this paper proposes a Web-based Virtual Ticket Machine, called WBVTM, using VRML [VRML Consortium, The Virtual Reality Modeling Language: International Standard ISO/IEC DIS 14772-1, 1997, available at ], Java and EAI (External Authoring Interface) [Silicon Graphics, Inc., The External Authoring Interface (EAI), available at ], to help people with acquired brain injury (ABI) to relearn basic living skills at home at a low cost. As these technologies are open standard and feature usability on the Internet, WBVTM achieves the goals of portability, easy accessibility and cost-effectiveness.

Clinical and cost-effectiveness analysis of early detection of patients at nutrition risk during their hospital stay through the new screening method CIPA: a study protocol.

PubMed

Suárez-Llanos, José Pablo; Benítez-Brito, Néstor; Vallejo-Torres, Laura; Delgado-Brito, Irina; Rosat-Rodrigo, Adriá; Hernández-Carballo, Carolina; Ramallo-Fariña, Yolanda; Pereyra-García-Castro, Francisca; Carlos-Romero, Juan; Felipe-Pérez, Nieves; García-Niebla, Jennifer; Calderón-Ledezma, Eduardo Mauricio; González-Melián, Teresa de Jesús; Llorente-Gómez de Segura, Ignacio; Barrera-Gómez, Manuel Ángel

2017-04-20

Malnutrition is highly prevalent in hospitalized patients and results in a worsened clinical course as well as an increased length of stay, mortality, and costs. Therefore, simple nutrition screening systems, such as CIPA (control of food intake, protein, anthropometry), may be implemented to facilitate the patient's recovery process. The aim of this study is to evaluate the effectiveness and cost-effectiveness of implementing such screening tool in a tertiary hospital, consistent with the lack of similar, published studies on any hospital nutrition screening system. The present study is carried out as an open, controlled, randomized study on patients that were admitted to the Internal Medicine and the General and Digestive Surgery ward; the patients were randomized to either a control or an intervention group (n = 824, thereof 412 patients in each of the two study arms). The control group underwent usual inpatient clinical care, while the intervention group was evaluated with the CIPA screening tool for early detection of malnutrition and treated accordingly. CIPA nutrition screening was performed upon hospital admission and classified positive when at least one of the following parameters was met: 72 h food intake control < 50%, serum albumin < 3 g/dL, body mass index < 18.5 kg/m 2 (or mid-upper arm circumference ≤ 22.5 cm). In this case, the doctor decided on whether or not providing nutrition support. The following variables will be evaluated: hospital length of stay (primary endpoint), mortality, 3-month readmission, and in-hospital complications. Likewise, the quality of life questionnaires EQ-5D-5 L are being collected for all patients at hospital admission, discharge, and 3 months post-discharge. Analysis of cost-effectiveness will be performed by measuring effectiveness in terms of quality-adjusted life years (QALYs). The cost per patient will be established by identifying health care resource utilization; cost-effectiveness will be determined through the incremental cost-effectiveness ratio (ICER). We will calculate the incremental cost per QALY gained with respect to the intervention. This ongoing trial aims to evaluate the cost-effectiveness of implementing the malnutrition screening tool CIPA in a tertiary hospital. Clinical Trial.gov ( NCT02721706 ). First receivevd: March 1, 2016 Last updated: April 8, 2017 Last verified: April 2017.

Developing and testing a cost data collection instrument for noncommunicable disease registry planning.

PubMed

Subramanian, Sujha; Tangka, Florence; Edwards, Patrick; Hoover, Sonja; Cole-Beebe, Maggie

2016-12-01

This article reports on the methods and framework we have developed to guide economic evaluation of noncommunicable disease registries. We developed a cost data collection instrument, the Centers for Disease Control and Prevention's (CDC's) International Registry Costing Tool (IntRegCosting Tool), based on established economics methods We performed in-depth case studies, site visit interviews, and pilot testing in 11 registries from multiple countries including India, Kenya, Uganda, Colombia, and Barbados to assess the overall quality of the data collected from cancer and cardiovascular registries. Overall, the registries were able to use the IntRegCosting Tool to assign operating expenditures to specific activities. We verified that registries were able to provide accurate estimation of labor costs, which is the largest expenditure incurred by registries. We also identified several factors that can influence the cost of registry operations, including size of the geographic area served, data collection approach, local cost of living, presence of rural areas, volume of cases, extent of consolidation of records to cases, and continuity of funding. Internal and external registry factors reveal that a single estimate for the cost of registry operations is not feasible; costs will vary on the basis of factors that may be beyond the control of the registries. Some factors, such as data collection approach, can be modified to improve the efficiency of registry operations. These findings will inform both future economic data collection using a web-based tool and cost and cost-effectiveness analyses of registry operations in low- and middle-income countries (LMICs) and other locations with similar characteristics. Copyright © 2016 Elsevier Ltd. All rights reserved.

High sample throughput genotyping for estimating C-lineage introgression in the dark honeybee: an accurate and cost-effective SNP-based tool.

PubMed

Henriques, Dora; Browne, Keith A; Barnett, Mark W; Parejo, Melanie; Kryger, Per; Freeman, Tom C; Muñoz, Irene; Garnery, Lionel; Highet, Fiona; Jonhston, J Spencer; McCormack, Grace P; Pinto, M Alice

2018-06-04

The natural distribution of the honeybee (Apis mellifera L.) has been changed by humans in recent decades to such an extent that the formerly widest-spread European subspecies, Apis mellifera mellifera, is threatened by extinction through introgression from highly divergent commercial strains in large tracts of its range. Conservation efforts for A. m. mellifera are underway in multiple European countries requiring reliable and cost-efficient molecular tools to identify purebred colonies. Here, we developed four ancestry-informative SNP assays for high sample throughput genotyping using the iPLEX Mass Array system. Our customized assays were tested on DNA from individual and pooled, haploid and diploid honeybee samples extracted from different tissues using a diverse range of protocols. The assays had a high genotyping success rate and yielded accurate genotypes. Performance assessed against whole-genome data showed that individual assays behaved well, although the most accurate introgression estimates were obtained for the four assays combined (117 SNPs). The best compromise between accuracy and genotyping costs was achieved when combining two assays (62 SNPs). We provide a ready-to-use cost-effective tool for accurate molecular identification and estimation of introgression levels to more effectively monitor and manage A. m. mellifera conservatories.

Potential approaches to the management of third-party impacts from groundwater transfers

NASA Astrophysics Data System (ADS)

Skurray, James H.; Pannell, David J.

2012-08-01

Groundwater extraction can have varied and diffuse effects. Negative external effects may include costs imposed on other groundwater users and on surrounding ecosystems. Environmental damages are commonly not reflected in market transactions. Groundwater transfers have the potential to cause spatial redistribution, concentration, and qualitative transformation of the impacts from pumping. An economically and environmentally sound groundwater transfer scheme would ensure that marginal costs from trades do not exceed marginal benefits, accounting for all third-party impacts, including those of a non-monetary nature as well as delayed effects. This paper proposes a menu of possible management strategies that would help preclude unacceptable impacts by restricting transfers with certain attributes, ideally ensuring that permitted transfers are at least welfare-neutral. Management tools would require that transfers limit or reduce environmental impacts, and provide for the compensation of financial impacts. Three management tools are described. While these tools can limit impacts from a given level of extraction, they cannot substitute for sustainable overall withdrawal limits. Careful implementation of transfer limits and exchange rates, and the strategic use of management area boundaries, may enable a transfer system to restrict negative externalities mainly to monetary costs. Provision for compensation of these costs could be built into the system.

APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2003-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Patrick Gonzalez

2004-07-10

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: remote sensing for carbon analysis; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Costs and Cost-Effectiveness of Plasmodium vivax Control.

PubMed

White, Michael T; Yeung, Shunmay; Patouillard, Edith; Cibulskis, Richard

2016-12-28

The continued success of efforts to reduce the global malaria burden will require sustained funding for interventions specifically targeting Plasmodium vivax The optimal use of limited financial resources necessitates cost and cost-effectiveness analyses of strategies for diagnosing and treating P. vivax and vector control tools. Herein, we review the existing published evidence on the costs and cost-effectiveness of interventions for controlling P. vivax, identifying nine studies focused on diagnosis and treatment and seven studies focused on vector control. Although many of the results from the much more extensive P. falciparum literature can be applied to P. vivax, it is not always possible to extrapolate results from P. falciparum-specific cost-effectiveness analyses. Notably, there is a need for additional studies to evaluate the potential cost-effectiveness of radical cure with primaquine for the prevention of P. vivax relapses with glucose-6-phosphate dehydrogenase testing. © The American Society of Tropical Medicine and Hygiene.

Costs and Cost-Effectiveness of Plasmodium vivax Control

PubMed Central

White, Michael T.; Yeung, Shunmay; Patouillard, Edith; Cibulskis, Richard

2016-01-01

The continued success of efforts to reduce the global malaria burden will require sustained funding for interventions specifically targeting Plasmodium vivax. The optimal use of limited financial resources necessitates cost and cost-effectiveness analyses of strategies for diagnosing and treating P. vivax and vector control tools. Herein, we review the existing published evidence on the costs and cost-effectiveness of interventions for controlling P. vivax, identifying nine studies focused on diagnosis and treatment and seven studies focused on vector control. Although many of the results from the much more extensive P. falciparum literature can be applied to P. vivax, it is not always possible to extrapolate results from P. falciparum–specific cost-effectiveness analyses. Notably, there is a need for additional studies to evaluate the potential cost-effectiveness of radical cure with primaquine for the prevention of P. vivax relapses with glucose-6-phosphate dehydrogenase testing. PMID:28025283

Demonstrating the cost effectiveness of an expert occupational and environmental health nurse: application of AAOHN's success tools. American Association of Occupational Health Nurses.

PubMed

Morris, J A; Smith, P S

2001-12-01

According to DiBenedetto, "Occupational health nurses enhance and maximize the health, safety, and productivity of the domestic and global work force" (1999b). This project clearly defined the multiple roles and activities provided by an occupational and environmental health nurse and assistant, supported by a part time contract occupational health nurse. A well defined estimate of the personnel costs for each of these roles is helpful both in demonstrating current value and in future strategic planning for this department. The model highlighted both successes and a business cost savings opportunity for integrated disability management. The AAOHN's Success Tools (1998) were invaluable in launching the development of this cost effectiveness model. The three methods were selected from several tools of varying complexities offered. Collecting available data to develop these metrics required internal consultation with finance, human resources, and risk management, as well as communication with external health, safety, and environmental providers in the community. Benchmarks, surveys, and performance indicators can be found readily in the literature and online. The primary motivation for occupational and environmental health nurses to develop cost effectiveness analyses is to demonstrate the value and worth of their programs and services. However, it can be equally important to identify which services are not cost effective so knowledge and skills may be used in ways that continue to provide value to employers (AAOHN, 1996). As evidence based health care challenges the occupational health community to demonstrate business rationale and financial return on investment, occupational and environmental health nurses must meet that challenge if they are to define their preferred future (DiBenedetto, 2000).

Compensation of the impact of low-cost manufacturing techniques in the design of E-plane multiport waveguide junctions

NASA Astrophysics Data System (ADS)

San-Blas, A. A.; Roca, J. M.; Cogollos, S.; Morro, J. V.; Boria, V. E.; Gimeno, B.

2016-06-01

In this work, a full-wave tool for the accurate analysis and design of compensated E-plane multiport junctions is proposed. The implemented tool is capable of evaluating the undesired effects related to the use of low-cost manufacturing techniques, which are mostly due to the introduction of rounded corners in the cross section of the rectangular waveguides of the device. The obtained results show that, although stringent mechanical effects are imposed, it is possible to compensate for the impact of the cited low-cost manufacturing techniques by redesigning the matching elements considered in the original device. Several new designs concerning a great variety of E-plane components (such as right-angled bends, T-junctions and magic-Ts) are presented, and useful design guidelines are provided. The implemented tool, which is mainly based on the boundary integral-resonant mode expansion technique, has been successfully validated by comparing the obtained results to simulated data provided by a commercial software based on the finite element method.

Target prioritization and strategy selection for active case-finding of pulmonary tuberculosis: a tool to support country-level project planning.

PubMed

Nishikiori, Nobuyuki; Van Weezenbeek, Catharina

2013-02-02

Despite the progress made in the past decade, tuberculosis (TB) control still faces significant challenges. In many countries with declining TB incidence, the disease tends to concentrate in vulnerable populations that often have limited access to health care. In light of the limitations of the current case-finding approach and the global urgency to improve case detection, active case-finding (ACF) has been suggested as an important complementary strategy to accelerate tuberculosis control especially among high-risk populations. The present exercise aims to develop a model that can be used for county-level project planning. A simple deterministic model was developed to calculate the number of estimated TB cases diagnosed and the associated costs of diagnosis. The model was designed to compare cost-effectiveness parameters, such as the cost per case detected, for different diagnostic algorithms when they are applied to different risk populations. The model was transformed into a web-based tool that can support national TB programmes and civil society partners in designing ACF activities. According to the model output, tuberculosis active case-finding can be a costly endeavor, depending on the target population and the diagnostic strategy. The analysis suggests the following: (1) Active case-finding activities are cost-effective only if the tuberculosis prevalence among the target population is high. (2) Extensive diagnostic methods (e.g. X-ray screening for the entire group, use of sputum culture or molecular diagnostics) can be applied only to very high-risk groups such as TB contacts, prisoners or people living with human immunodeficiency virus (HIV) infection. (3) Basic diagnostic approaches such as TB symptom screening are always applicable although the diagnostic yield is very limited. The cost-effectiveness parameter was sensitive to local diagnostic costs and the tuberculosis prevalence of target populations. The prioritization of appropriate target populations and careful selection of cost-effective diagnostic strategies are critical prerequisites for rational active case-finding activities. A decision to conduct such activities should be based on the setting-specific cost-effectiveness analysis and programmatic assessment. A web-based tool was developed and is available to support national tuberculosis programmes and partners in the formulation of cost-effective active case-finding activities at the national and subnational levels.

Economic evidence on integrated care for stroke patients; a systematic review

PubMed Central

Tummers, Johanneke F.M.M; Schrijvers, Augustinus J.P; Visser-Meily, Johanna M.A

2012-01-01

Introduction Given the high incidence of stroke worldwide and the large costs associated with the use of health care resources, it is important to define cost-effective and evidence-based services for stroke rehabilitation. The objective of this review was to assess the evidence on the relative cost or cost-effectiveness of all integrated care arrangements for stroke patients compared to usual care. Integrated care was defined as a multidisciplinary tool to improve the quality and efficiency of evidence-based care and is used as a communication tool between professionals to manage and standardize the outcome-orientated care. Methods A systematic literature review of cost analyses and economic evaluations was performed. Study characteristics, study quality and results were summarized. Results Fifteen studies met the inclusion criteria; six on early-supported discharge services, four on home-based rehabilitation, two on stroke units and three on stroke services. The follow-up per patient was generally short; one year or less. The comparators and the scope of included costs varied between studies. Conclusions Six out of six studies provided evidence that the costs of early-supported discharge are less than for conventional care, at similar health outcomes. Home-based rehabilitation is unlikely to lead to cost-savings, but achieves better health outcomes. Care in stroke units is more expensive than conventional care, but leads to improved health outcomes. The cost-effectiveness studies on integrated stroke services suggest that they can reduce costs. For future research we recommend to focus on the moderate and severely affected patients, include stroke severity as variable, adopt a societal costing perspective and include long-term costs and effects. PMID:23593053

3-D Printing as an Effective Educational Tool for MEMS Design and Fabrication

ERIC Educational Resources Information Center

Dahle, Reena; Rasel, Rafiul

2016-01-01

This paper presents a series of course modules developed as a high-impact and cost-effective learning tool for modeling and simulating the microfabrication process and design of microelectromechanical systems (MEMS) devices using three-dimensional (3-D) printing. Microfabrication technology is an established fabrication technique for small and…

The business case as a strategic tool for change.

PubMed

Weaver, Diana J; Sorrells-Jones, Jean

2007-09-01

The authors discuss the clinically focused business case, when it is and is not needed, and the knowledge and skills the nurse executive must master to use the business case effectively as a strategic tool. Necessary skills include translating nursing practice proposals into cost-effective change initiatives and marketing those changes to colleagues.

Print material as a public health education tool.

PubMed

Paul, C L; Redman, S; Sanson-Fisher, R W

1998-02-01

Despite the widespread use of print materials in public health education, little is known about the costs and processes involved in developing these materials and their effectiveness in practice. We examined a sample of printed health education materials, using interviews and checklists. The most cost-effective processes for developing materials were not being used and the effectiveness of materials was rarely evaluated.

Quality control troubleshooting tools for the mill floor

Treesearch

John Dramm

2000-01-01

Statistical Process Control (SPC) provides effective tools for improving process quality in the forest products industry resulting in reduced costs and improved productivity. Implementing SPC helps identify and locate problems that occur in wood products manufacturing. SPC tools achieve their real value when applied on the mill floor for monitoring and troubleshooting...

Development of efficient and cost-effective distributed hydrological modeling tool MWEasyDHM based on open-source MapWindow GIS

NASA Astrophysics Data System (ADS)

Lei, Xiaohui; Wang, Yuhui; Liao, Weihong; Jiang, Yunzhong; Tian, Yu; Wang, Hao

2011-09-01

Many regions are still threatened with frequent floods and water resource shortage problems in China. Consequently, the task of reproducing and predicting the hydrological process in watersheds is hard and unavoidable for reducing the risks of damage and loss. Thus, it is necessary to develop an efficient and cost-effective hydrological tool in China as many areas should be modeled. Currently, developed hydrological tools such as Mike SHE and ArcSWAT (soil and water assessment tool based on ArcGIS) show significant power in improving the precision of hydrological modeling in China by considering spatial variability both in land cover and in soil type. However, adopting developed commercial tools in such a large developing country comes at a high cost. Commercial modeling tools usually contain large numbers of formulas, complicated data formats, and many preprocessing or postprocessing steps that may make it difficult for the user to carry out simulation, thus lowering the efficiency of the modeling process. Besides, commercial hydrological models usually cannot be modified or improved to be suitable for some special hydrological conditions in China. Some other hydrological models are open source, but integrated into commercial GIS systems. Therefore, by integrating hydrological simulation code EasyDHM, a hydrological simulation tool named MWEasyDHM was developed based on open-source MapWindow GIS, the purpose of which is to establish the first open-source GIS-based distributed hydrological model tool in China by integrating modules of preprocessing, model computation, parameter estimation, result display, and analysis. MWEasyDHM provides users with a friendly manipulating MapWindow GIS interface, selectable multifunctional hydrological processing modules, and, more importantly, an efficient and cost-effective hydrological simulation tool. The general construction of MWEasyDHM consists of four major parts: (1) a general GIS module for hydrological analysis, (2) a preprocessing module for modeling inputs, (3) a model calibration module, and (4) a postprocessing module. The general GIS module for hydrological analysis is developed on the basis of totally open-source GIS software, MapWindow, which contains basic GIS functions. The preprocessing module is made up of three submodules including a DEM-based submodule for hydrological analysis, a submodule for default parameter calculation, and a submodule for the spatial interpolation of meteorological data. The calibration module contains parallel computation, real-time computation, and visualization. The postprocessing module includes model calibration and model results spatial visualization using tabular form and spatial grids. MWEasyDHM makes it possible for efficient modeling and calibration of EasyDHM, and promises further development of cost-effective applications in various watersheds.

Introduction of the Tools for Economic Analysis of Patient Management Interventions in Heart Failure Costing Tool: a user-friendly spreadsheet program to estimate costs of providing patient-centered interventions.

PubMed

Reed, Shelby D; Li, Yanhong; Kamble, Shital; Polsky, Daniel; Graham, Felicia L; Bowers, Margaret T; Samsa, Gregory P; Paul, Sara; Schulman, Kevin A; Whellan, David J; Riegel, Barbara J

2012-01-01

Patient-centered health care interventions, such as heart failure disease management programs, are under increasing pressure to demonstrate good value. Variability in costing methods and assumptions in economic evaluations of such interventions limit the comparability of cost estimates across studies. Valid cost estimation is critical to conducting economic evaluations and for program budgeting and reimbursement negotiations. Using sound economic principles, we developed the Tools for Economic Analysis of Patient Management Interventions in Heart Failure (TEAM-HF) Costing Tool, a spreadsheet program that can be used by researchers and health care managers to systematically generate cost estimates for economic evaluations and to inform budgetary decisions. The tool guides users on data collection and cost assignment for associated personnel, facilities, equipment, supplies, patient incentives, miscellaneous items, and start-up activities. The tool generates estimates of total program costs, cost per patient, and cost per week and presents results using both standardized and customized unit costs for side-by-side comparisons. Results from pilot testing indicated that the tool was well-formatted, easy to use, and followed a logical order. Cost estimates of a 12-week exercise training program in patients with heart failure were generated with the costing tool and were found to be consistent with estimates published in a recent study. The TEAM-HF Costing Tool could prove to be a valuable resource for researchers and health care managers to generate comprehensive cost estimates of patient-centered interventions in heart failure or other conditions for conducting high-quality economic evaluations and making well-informed health care management decisions.

Watershed Management Optimization Support Tool (WMOST) Webinar

EPA Pesticide Factsheets

EPA’s WMOST is a publicly available tool that can be used by state and local managers to screen a wide-range of options for cost-effective management of water resources, and it supports a broader integrated watershed management approach.

Estimation of risk management effects on revenue and purchased feed costs on US dairy farms.

PubMed

Hadrich, Joleen C; Johnson, Kamina K

2015-09-01

Variations in milk and feed prices directly affect dairy farm risk management decisions. This research used data from the 2010 US Department of Agriculture-Agricultural Resource Management Surveys phase III dairy survey to examine how risk management tools affected revenues and expenses across US dairy farms. The survey was sent to 26 states and collected information on costs and returns to individual dairy farms. This research used the information from milk sales, crops sales, feed expenses, and farm and operator characteristics, as well as the use of risk management tools. Matching methodology was used to evaluate the effect of 5 independent risk management tools on revenues and expenses: selling milk to a cooperative, using a commodity contract to sell grain, feeding homegrown forage at a basic and intensive level, and use of a nutritionist. Results showed that dairy farms located in the Midwest and East benefit from selling milk to a cooperative and using commodity contracts to sell grain. Across the United States, using a nutritionist increased total feed costs, whereas a feeding program that included more than 65% homegrown forages decreased total feed costs. Results point to benefits from educational programming on risk management tools that are region specific rather than a broad generalization to all US dairy farmers. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A facility monitoring system: The single most valuable and cost-effective tool available to an energy manager

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, W.A.

Energy engineering and management combines engineering problem-solving and financial management techniques to reduce utility costs. At present, substantial amounts of time and money are being spent in order to attempt to quantify energy consumption and costs and define opportunities for savings. Unfortunately, accurate verification of results is often overlooked. Advances in technology during the last few years have made the installation of a permanent, PC-based monitoring system possible for any facility, often for no more than the cost of a detailed study. By investing initially in a monitoring system rather than audits or studies, the actual consumption and cost datamore » will be available on a continuing basis and can be used to produce immediate operational savings, more accurately analyze opportunities requiring capital investments, and to verify actual savings resulting from changes. A permanent monitoring system, installed as the first step in a utility cost reduction effort, to identify where and how energy is used in a facility on a dynamic and real-time basis, can provide the most valuable and cost-effective tool available to an energy manager. The resulting data allows energy consumption patterns and utility costs to be understood and managed in the same manner as all other costs within a facility.« less

Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

1997-12-01

Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite mission concepts.

Soak Up the Rain New England Webinar Series: National ...

EPA Pesticide Factsheets

Presenters will provide an introduction to the most recent EPA green infrastructure tools to R1 stakeholders; and their use in making decisions about implementing green infrastructure. We will discuss structuring your green infrastructure decision, finding appropriate information and tools, evaluating options and selecting the right Best Management Practices mix for your needs.WMOST (Watershed Management Optimization Support Tool)- for screening a wide range of practices for cost-effectiveness in achieving watershed or water utilities management goals.GIWiz (Green Infrastructure Wizard)- a web application connecting communities to EPA Green Infrastructure tools and resources.Opti-Tool-designed to assist in developing technically sound and optimized cost-effective Stormwater management plans. National Stormwater Calculator- a desktop application for estimating the impact of land cover change and green infrastructure controls on stormwater runoff. DASEES-GI (Decision Analysis for a Sustainable Environment, Economy, and Society) – a framework for linking objectives and measures with green infrastructure methods. Presenters will provide an introduction to the most recent EPA green infrastructure tools to R1 stakeholders; and their use in making decisions about implementing green infrastructure. We will discuss structuring your green infrastructure decision, finding appropriate information and tools, evaluating options and selecting the right Best Management Pr

Assessment of the effectiveness of supply-side cost-containment measures

PubMed Central

Garrison, Louis P.

1992-01-01

This article assesses the arguments and evidence concerning the likely effectiveness of four supply-side cost-containment measures. The health planning efforts of the 1970s, particularly certificate-of-need regulations, had very limited success in containing costs. The new and related tools of technology assessment and practice guidelines hold some promise for refining benefit packages, but they are inadequate for micromanaging complex medical practices. Payment policies, such as hospital ratesetting, have enjoyed some success in limiting hospital cost growth but are less effective at controlling total costs. None of these measures alone is likely to address fully the fundamental issues of equity and efficiency in health care resource allocation that underlie the problem of rising costs. PMID:25372721

The Cost-Effectiveness of Real-Time Continuous Glucose Monitoring (RT-CGM) in Type 2 Diabetes.

PubMed

Fonda, Stephanie J; Graham, Claudia; Munakata, Julie; Powers, Julia M; Price, David; Vigersky, Robert A

2016-07-01

This analysis models the cost-effectiveness of real-time continuous glucose monitoring (RT-CGM) using evidence from a randomized controlled trial (RCT) that demonstrated RT-CGM reduced A1C, for up to 9 months after using the technology, among patients with type 2 diabetes not on prandial insulin. RT-CGM was offered short-term and intermittently as a self-care tool to inform patients' behavior. The analyses projected lifetime clinical and economic outcomes for RT-CGM versus self-monitoring of blood glucose by fingerstick only. The base-case analysis was consistent with the RCT (RT-CGM for 2 weeks on/1 week off over 3 months). A scenario analysis simulated outcomes of an RT-CGM "refresher" after the active intervention of the RCT. Analyses used the IMS CORE Diabetes Model and were conducted from a US third-party payer perspective, including direct costs obtained from published sources and inflated to 2011 US dollars. Costs and health outcomes were discounted at 3% per annum. Life expectancy (LE) and quality-adjusted life expectancy (QALE) from RT-CGM were 0.10 and 0.07, with a cost of $653/patient over a lifetime. Incremental LE and QALE from a "refresher" were 0.14 and 0.10, with a cost of $1312/patient over a lifetime, and incremental cost-effectiveness ratios were $9319 and $13 030 per LY and QALY gained. RT-CGM, as a self-care tool, is a cost-effective disease management option in the US for people with type 2 diabetes not on prandial insulin. Repeated use of RT-CGM may result in additional cost-effectiveness. © 2016 Diabetes Technology Society.

Strategic Planning in Population Health and Public Health Practice: A Call to Action for Higher Education.

PubMed

Phelps, Charles; Madhavan, Guruprasad; Rappuoli, Rino; Levin, Scott; Shortliffe, Edward; Colwell, Rita

2016-03-01

Scarce resources, especially in population health and public health practice, underlie the importance of strategic planning. Public health agencies' current planning and priority setting efforts are often narrow, at times opaque, and focused on single metrics such as cost-effectiveness. As demonstrated by SMART Vaccines, a decision support software system developed by the Institute of Medicine and the National Academy of Engineering, new approaches to strategic planning allow the formal incorporation of multiple stakeholder views and multicriteria decision making that surpass even those sophisticated cost-effectiveness analyses widely recommended and used for public health planning. Institutions of higher education can and should respond by building on modern strategic planning tools as they teach their students how to improve population health and public health practice. Strategic planning in population health and public health practice often uses single indicators of success or, when using multiple indicators, provides no mechanism for coherently combining the assessments. Cost-effectiveness analysis, the most complex strategic planning tool commonly applied in public health, uses only a single metric to evaluate programmatic choices, even though other factors often influence actual decisions. Our work employed a multicriteria systems analysis approach--specifically, multiattribute utility theory--to assist in strategic planning and priority setting in a particular area of health care (vaccines), thereby moving beyond the traditional cost-effectiveness analysis approach. (1) Multicriteria systems analysis provides more flexibility, transparency, and clarity in decision support for public health issues compared with cost-effectiveness analysis. (2) More sophisticated systems-level analyses will become increasingly important to public health as disease burdens increase and the resources to deal with them become scarcer. The teaching of strategic planning in public health must be expanded in order to fill a void in the profession's planning capabilities. Public health training should actively incorporate model building, promote the interactive use of software tools, and explore planning approaches that transcend restrictive assumptions of cost-effectiveness analysis. The Strategic Multi-Attribute Ranking Tool for Vaccines (SMART Vaccines), which was recently developed by the Institute of Medicine and the National Academy of Engineering to help prioritize new vaccine development, is a working example of systems analysis as a basis for decision support. © 2016 Milbank Memorial Fund.

In silico site-directed mutagenesis informs species-specific predictions of chemical susceptibility derived from the Sequence Alignment to Predict Across Species Susceptibility (SeqAPASS) tool

EPA Science Inventory

The Sequence Alignment to Predict Across Species Susceptibility (SeqAPASS) tool was developed to address needs for rapid, cost effective methods of species extrapolation of chemical susceptibility. Specifically, the SeqAPASS tool compares the primary sequence (Level 1), functiona...

Cardiovascular Disease Screening By Community Health Workers Can Be Cost-Effective In Low-Resource Countries.

PubMed

Gaziano, Thomas; Abrahams-Gessel, Shafika; Surka, Sam; Sy, Stephen; Pandya, Ankur; Denman, Catalina A; Mendoza, Carlos; Puoane, Thandi; Levitt, Naomi S

2015-09-01

In low-resource settings, a physician is not always available. We recently demonstrated that community health workers-instead of physicians or nurses-can efficiently screen adults for cardiovascular disease in South Africa, Mexico, and Guatemala. In this analysis we sought to determine the health and economic impacts of shifting this screening to community health workers equipped with either a paper-based or a mobile phone-based screening tool. We found that screening by community health workers was very cost-effective or even cost-saving in all three countries, compared to the usual clinic-based screening. The mobile application emerged as the most cost-effective strategy because it could save more lives than the paper tool at minimal extra cost. Our modeling indicated that screening by community health workers, combined with improved treatment rates, would increase the number of deaths averted from 15,000 to 110,000, compared to standard care. Policy makers should promote greater acceptance of community health workers by both national populations and health professionals and should increase their commitment to treating cardiovascular disease and making medications available. Project HOPE—The People-to-People Health Foundation, Inc.

Final Technical Report Power through Policy: "Best Practices" for Cost-Effective Distributed Wind

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhoads-Weaver, Heather; Gagne, Matthew; Sahl, Kurt

2012-02-28

Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The project's final products include the Distributed Windmore » Policy Comparison Tool, found at www.windpolicytool.org, and its accompanying documentation: Distributed Wind Policy Comparison Tool Guidebook: User Instructions, Assumptions, and Case Studies. With only two initial user inputs required, the Policy Tool allows users to adjust and test a wide range of policy-related variables through a user-friendly dashboard interface with slider bars. The Policy Tool is populated with a variety of financial variables, including turbine costs, electricity rates, policies, and financial incentives; economic variables including discount and escalation rates; as well as technical variables that impact electricity production, such as turbine power curves and wind speed. The Policy Tool allows users to change many of the variables, including the policies, to gauge the expected impacts that various policy combinations could have on the cost of energy (COE), net present value (NPV), internal rate of return (IRR), and the simple payback of distributed wind projects ranging in size from 2.4 kilowatts (kW) to 100 kW. The project conducted case studies to demonstrate how the Policy Tool can provide insights into 'what if' scenarios and also allow the current status of incentives to be examined or defended when necessary. The ranking of distributed wind state policy and economic environments summarized in the attached report, based on the Policy Tool's default COE results, highlights favorable market opportunities for distributed wind growth as well as market conditions ripe for improvement. Best practices for distributed wind state policies are identified through an evaluation of their effect on improving the bottom line of project investments. The case studies and state rankings were based on incentives, power curves, and turbine pricing as of 2010, and may not match the current results from the Policy Tool. The Policy Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth). It also allows policymakers to determine the impact of policy options, addressing market challenges identified in the U.S. DOE's '20% Wind Energy by 2030' report and helping to meet COE targets. In providing a simple and easy-to-use policy comparison tool that estimates financial performance, the Policy Tool and guidebook are expected to enhance market expansion by the small wind industry by increasing and refining the understanding of distributed wind costs, policy best practices, and key market opportunities in all 50 states. This comprehensive overview and customized software to quickly calculate and compare policy scenarios represent a fundamental step in allowing policymakers to see how their decisions impact the bottom line for distributed wind consumers, while estimating the relative advantages of different options available in their policy toolboxes. Interested stakeholders have suggested numerous ways to enhance and expand the initial effort to develop an even more user-friendly Policy Tool and guidebook, including the enhancement and expansion of the current tool, and conducting further analysis. The report and the project's Guidebook include further details on possible next steps. NREL Report No. BK-5500-53127; DOE/GO-102011-3453.« less

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

Introduction of the TEAM-HF Costing Tool: A User-Friendly Spreadsheet Program to Estimate Costs of Providing Patient-Centered Interventions

PubMed Central

Reed, Shelby D.; Li, Yanhong; Kamble, Shital; Polsky, Daniel; Graham, Felicia L.; Bowers, Margaret T.; Samsa, Gregory P.; Paul, Sara; Schulman, Kevin A.; Whellan, David J.; Riegel, Barbara J.

2011-01-01

Background Patient-centered health care interventions, such as heart failure disease management programs, are under increasing pressure to demonstrate good value. Variability in costing methods and assumptions in economic evaluations of such interventions limit the comparability of cost estimates across studies. Valid cost estimation is critical to conducting economic evaluations and for program budgeting and reimbursement negotiations. Methods and Results Using sound economic principles, we developed the Tools for Economic Analysis of Patient Management Interventions in Heart Failure (TEAM-HF) Costing Tool, a spreadsheet program that can be used by researchers or health care managers to systematically generate cost estimates for economic evaluations and to inform budgetary decisions. The tool guides users on data collection and cost assignment for associated personnel, facilities, equipment, supplies, patient incentives, miscellaneous items, and start-up activities. The tool generates estimates of total program costs, cost per patient, and cost per week and presents results using both standardized and customized unit costs for side-by-side comparisons. Results from pilot testing indicated that the tool was well-formatted, easy to use, and followed a logical order. Cost estimates of a 12-week exercise training program in patients with heart failure were generated with the costing tool and were found to be consistent with estimates published in a recent study. Conclusions The TEAM-HF Costing Tool could prove to be a valuable resource for researchers and health care managers to generate comprehensive cost estimates of patient-centered interventions in heart failure or other conditions for conducting high-quality economic evaluations and making well-informed health care management decisions. PMID:22147884

Meta-tools for software development and knowledge acquisition

NASA Technical Reports Server (NTRS)

Eriksson, Henrik; Musen, Mark A.

1992-01-01

The effectiveness of tools that provide support for software development is highly dependent on the match between the tools and their task. Knowledge-acquisition (KA) tools constitute a class of development tools targeted at knowledge-based systems. Generally, KA tools that are custom-tailored for particular application domains are more effective than are general KA tools that cover a large class of domains. The high cost of custom-tailoring KA tools manually has encouraged researchers to develop meta-tools for KA tools. Current research issues in meta-tools for knowledge acquisition are the specification styles, or meta-views, for target KA tools used, and the relationships between the specification entered in the meta-tool and other specifications for the target program under development. We examine different types of meta-views and meta-tools. Our current project is to provide meta-tools that produce KA tools from multiple specification sources--for instance, from a task analysis of the target application.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2005-10-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-01-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

For Third Enrollment Period, Marketplaces Expand Decision Support Tools To Assist Consumers.

PubMed

Wong, Charlene A; Polsky, Daniel E; Jones, Arthur T; Weiner, Janet; Town, Robert J; Baker, Tom

2016-04-01

The design of the Affordable Care Act's online health insurance Marketplaces can improve how consumers make complex health plan choices. We examined the choice environment on the state-based Marketplaces and HealthCare.gov in the third open enrollment period. Compared to previous enrollment periods, we found greater adoption of some decision support tools, such as total cost estimators and integrated provider lookups. Total cost estimators differed in how they generated estimates: In some Marketplaces, consumers categorized their own utilization, while in others, consumers answered detailed questions and were assigned a utilization profile. The tools available before creating an account (in the window-shopping period) and afterward (in the real-shopping period) differed in several Marketplaces. For example, five Marketplaces provided total cost estimators to window shoppers, but only two provided them to real shoppers. Further research is needed on the impact of different choice environments and on which tools are most effective in helping consumers pick optimal plans. Project HOPE—The People-to-People Health Foundation, Inc.

How do we evaluate the cost of healthcare technology?

NASA Astrophysics Data System (ADS)

Nobel, Joel J.

1994-12-01

Five critical questions apply when evaluating the cost of healthcare technology: Who is asking the question (of how to evaluate healthcare costs)? For what purpose? What is the nature of the decision that must be made? At what state of a technology's development and diffusion are the questions being posed? What type of technology is stimulating the questions? A large number of organizations, both national and international, are engaged in technology assessment, and constructive disagreement improves the overall quality of those assessments. Current cost measurements tools such as cost-utility analysis, cost-benefit analysis, cost- effectiveness analysis, and outcomes research are weak and ineffective. Recently, pharmaceutical manufacturers have adopted more global cost-effectiveness studies. Technology assessments will ultimately focus on examining the relative cost-effectiveness of alternative technologies for a specific pathology or examining the relative cost-effectiveness of alternative technologies for a specific pathology or DRG. In addition to the traditional healthcare facility--hospital, outpatient facility, or group practice, group purchasing organizations are also asking about cost-effectiveness of healthcare. ECRI's SELECTTM process, unlike less effective technology assessments, takes into account real-world user experience data and life-cycle cost analysis in addition to detailed comparisons of technical features and performance.

A web-based rapid assessment tool for production publishing solutions

NASA Astrophysics Data System (ADS)

Sun, Tong

2010-02-01

Solution assessment is a critical first-step in understanding and measuring the business process efficiency enabled by an integrated solution package. However, assessing the effectiveness of any solution is usually a very expensive and timeconsuming task which involves lots of domain knowledge, collecting and understanding the specific customer operational context, defining validation scenarios and estimating the expected performance and operational cost. This paper presents an intelligent web-based tool that can rapidly assess any given solution package for production publishing workflows via a simulation engine and create a report for various estimated performance metrics (e.g. throughput, turnaround time, resource utilization) and operational cost. By integrating the digital publishing workflow ontology and an activity based costing model with a Petri-net based workflow simulation engine, this web-based tool allows users to quickly evaluate any potential digital publishing solutions side-by-side within their desired operational contexts, and provides a low-cost and rapid assessment for organizations before committing any purchase. This tool also benefits the solution providers to shorten the sales cycles, establishing a trustworthy customer relationship and supplement the professional assessment services with a proven quantitative simulation and estimation technology.

Probabilistic cost-benefit analysis of disaster risk management in a development context.

PubMed

Kull, Daniel; Mechler, Reinhard; Hochrainer-Stigler, Stefan

2013-07-01

Limited studies have shown that disaster risk management (DRM) can be cost-efficient in a development context. Cost-benefit analysis (CBA) is an evaluation tool to analyse economic efficiency. This research introduces quantitative, stochastic CBA frameworks and applies them in case studies of flood and drought risk reduction in India and Pakistan, while also incorporating projected climate change impacts. DRM interventions are shown to be economically efficient, with integrated approaches more cost-effective and robust than singular interventions. The paper highlights that CBA can be a useful tool if certain issues are considered properly, including: complexities in estimating risk; data dependency of results; negative effects of interventions; and distributional aspects. The design and process of CBA must take into account specific objectives, available information, resources, and the perceptions and needs of stakeholders as transparently as possible. Intervention design and uncertainties should be qualified through dialogue, indicating that process is as important as numerical results. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

Value Engineering. "A Working Tool for Cost Control in the Design of Educational Facilities."

ERIC Educational Resources Information Center

Lawrence, Jerry

Value Engineering (VE) is a cost optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. By using VE, the optimum value for every life cycle dollar spent on a facility is obtained by identifying not…

Software Cuts Homebuilding Costs, Increases Energy Efficiency

NASA Technical Reports Server (NTRS)

2015-01-01

To sort out the best combinations of technologies for a crewed mission to Mars, NASA Headquarters awarded grants to MIT's Department of Aeronautics and Astronautics to develop an algorithm-based software tool that highlights the most reliable and cost-effective options. Utilizing the software, Professor Edward Crawley founded Cambridge, Massachussetts-based Ekotrope, which helps homebuilders choose cost- and energy-efficient floor plans and materials.

The Seamless Transfer-of-Care Protocol: a randomized controlled trial assessing the efficacy of an electronic transfer-of-care communication tool.

PubMed

Okoniewska, Barbara M; Santana, Maria J; Holroyd-Leduc, Jayna; Flemons, Ward; O'Beirne, Maeve; White, Deborah; Clement, Fiona; Forster, Alan; Ghali, William A

2012-11-21

The transition between acute care and community care represents a vulnerable period in health care delivery. The vulnerability of this period has been attributed to changes to patients' medication regimens during hospitalization, failure to reconcile discrepancies between admission and discharge and the burdening of patients/families to take over care responsibilities at discharge and to relay important information to the primary care physician. Electronic communication platforms can provide an immediate link between acute care and community care physicians (and other community providers), designed to ensure consistent information transfer. This study examines whether a transfer-of-care (TOC) communication tool is efficacious and cost-effective for reducing hospital readmission, adverse events and adverse drug events as well as reducing death. A randomized controlled trial conducted on the Medical Teaching Unit of a Canadian tertiary care centre will evaluate the efficacy and cost-effectiveness of a TOC communication tool. Medical in-patients admitted to the unit will be considered for this study. Data will be collected upon admission, and a total of 1400 patients will be randomized. The control group's acute care stay will be summarized using a traditional dictated summary, while the intervention group will have a summary generated using the TOC communication tool. The primary outcome will be a composite, at 3 months, of death or readmission to any Alberta acute-care hospital. Secondary outcomes will be the occurrence of post-discharge adverse events and adverse drug events at 1 month post discharge. Patients with adverse outcomes will have their cases reviewed by two Royal College certified internists or College-certified family physicians, blinded to patients' group assignments, to determine the type, severity, preventability and ameliorability of all detected adverse outcomes. An accompanying economic evaluation will assess the cost per life saved, cost per readmission avoided and cost per QALY gained with the TOC communication tool compared to traditional dictation summaries. This paper outlines the study protocol for a randomized controlled trial evaluating an electronic transfer-of-care communication tool, with sufficient statistical power to assess the impact of the tool on the significant outcomes of post-discharge death or readmission. The study findings will inform health systems around the world on the potential benefits of such tools, and the value for money associated with their widespread implementation. ClinicalTrials.gov NCT01402609.

Cost-effectiveness of lung cancer screening and treatment methods: a systematic review of systematic reviews.

PubMed

Azar, Farbod Ebadifard; Azami-Aghdash, Saber; Pournaghi-Azar, Fatemeh; Mazdaki, Alireza; Rezapour, Aziz; Ebrahimi, Parvin; Yousefzadeh, Negar

2017-06-19

Due to extensive literature in the field of lung cancer and their heterogeneous results, the aim of this study was to systematically review of systematic reviews studies which reviewed the cost-effectiveness of various lung cancer screening and treatment methods. In this systematic review of systematic reviews study, required data were collected searching the following key words which selected from Mesh: "lung cancer", "lung oncology", "lung Carcinoma", "lung neoplasm", "lung tumors", "cost- effectiveness", "systematic review" and "Meta-analysis". The following databases were searched: PubMed, Cochrane Library electronic databases, Google Scholar, and Scopus. Two reviewers (RA and A-AS) evaluated the articles according to the checklist of "assessment of multiple systematic reviews" (AMSTAR) tool. Overall, information of 110 papers was discussed in eight systematic reviews. Authors focused on cost-effectiveness of lung cancer treatments in five systematic reviews. Targeted therapy options (bevacizumab, Erlotinib and Crizotinib) show an acceptable cost-effectiveness. Results of three studies failed to show cost-effectiveness of screening methods. None of the studies had used the meta-analysis method. The Quality of Health Economic Studies (QHES) tool and Drummond checklist were mostly used in assessing the quality of articles. Most perspective was related to the Payer (64 times) and the lowest was related to Social (11times). Most cases referred to Incremental analysis (82%) and also the lowest point of referral was related to Discounting (in 49% of the cases). The average quality score of included studies was calculated 9.2% from 11. Targeted therapy can be an option for the treatment of lung cancer. Evaluation of the cost-effectiveness of computerized tomographic colonography (CTC) in lung cancer screening is recommended. The perspective of the community should be more taken into consideration in studies of cost-effectiveness. Paying more attention to the topic of Discounting will be necessary in the studies.

DIDEM - An integrated model for comparative health damage costs calculation of air pollution

NASA Astrophysics Data System (ADS)

Ravina, Marco; Panepinto, Deborah; Zanetti, Maria Chiara

2018-01-01

Air pollution represents a continuous hazard to human health. Administration, companies and population need efficient indicators of the possible effects given by a change in decision, strategy or habit. The monetary quantification of health effects of air pollution through the definition of external costs is increasingly recognized as a useful indicator to support decision and information at all levels. The development of modelling tools for the calculation of external costs can provide support to analysts in the development of consistent and comparable assessments. In this paper, the DIATI Dispersion and Externalities Model (DIDEM) is presented. The DIDEM model calculates the delta-external costs of air pollution comparing two alternative emission scenarios. This tool integrates CALPUFF's advanced dispersion modelling with the latest WHO recommendations on concentration-response functions. The model is based on the impact pathway method. It was designed to work with a fine spatial resolution and a local or national geographic scope. The modular structure allows users to input their own data sets. The DIDEM model was tested on a real case study, represented by a comparative analysis of the district heating system in Turin, Italy. Additional advantages and drawbacks of the tool are discussed in the paper. A comparison with other existing models worldwide is reported.

Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

NASA Astrophysics Data System (ADS)

Sirirojvisuth, Apinut

In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this concept, the additional manufacturing knowledge can be used to identify a more accurate lifecycle cost and facilitate higher fidelity tradeoffs during conceptual and preliminary design. Advanced Composite Cost Estimating Model (ACCEM) is employed as a process-based cost component to replace the original TCM result of the composite part production cost. The reason for the replacement is that TCM estimates production costs from part weights as a result of subtractive manufacturing of metallic origin such as casting, forging, and machining processes. A complexity factor can sometimes be adjusted to reflect different types of metal and machine settings. The TCM assumption, however, gives erroneous results when applied to additive processes like those of composite manufacturing. Another innovative aspect of this research is the introduction of a work measurement technique called Maynard Operation Sequence Technique (MOST) to be used, similarly to Activity-Based Costing (ABC) approach, to estimate manufacturing time of a part by virtue of breaking down the operations occurred during its production. ABC allows a realistic determination of cost incurred in each activity, as opposed to using a traditional method of time estimation by analogy or using response surface equations from historical process data. The MOST concept provides a tailored study of an individual process typically required for a new, innovative design. Nevertheless, the MOST idea has some challenges, one of which is its requirement to build a new process from ground up. The process development requires a Subject Matter Expertise (SME) in manufacturing method of the particular design. The SME must have also a comprehensive understanding of the MOST system so that the correct parameters are chosen. In practice, these knowledge requirements may demand people from outside of the design discipline and a priori training of MOST. To relieve the constraint, this study includes an entirely new sub-system architecture that comprises 1) a knowledge-based system to provide the required knowledge during the process selection; and 2) a new user-interface to guide the parameter selection when building the process using MOST. Also included in this study is the demonstration of how the HLCET and its constituents can be integrated with a Georgia Tech' Integrated Product and Process Development (IPPD) methodology. The applicability of this work will be shown through a complex aerospace design example to gain insights into how manufacturing knowledge helps make better design decisions during the early stages. The setup process is explained with an example of its utility demonstrated in a hypothetical fighter aircraft wing redesign. The evaluation of the system effectiveness against existing methodologies is illustrated to conclude the thesis.

REACH-ER: a tool to evaluate river basin remediation measures for contaminants at the catchment scale

NASA Astrophysics Data System (ADS)

van Griensven, Ann; Haest, Pieter Jan; Broekx, Steven; Seuntjens, Piet; Campling, Paul; Ducos, Geraldine; Blaha, Ludek; Slobodnik, Jaroslav

2010-05-01

The European Union (EU) adopted the Water Framework Directive (WFD) in 2000 ensuring that all aquatic ecosystems meet ‘good status' by 2015. However, it is a major challenge for river basin managers to meet this requirement in river basins with a high population density as well as intensive agricultural and industrial activities. The EU financed AQUAREHAB project (FP7) specifically examines the ecological and economic impact of innovative rehabilitation technologies for multi-pressured degraded water bodies. For this purpose, a generic collaborative management tool ‘REACH-ER' is being developed that can be used by stakeholders, citizens and water managers to evaluate the ecological and economical effects of different remedial actions on waterbodies. The tool is built using databases from large scale models simulating the hydrological dynamics of the river basing and sub-basins, the costs of the measures and the effectiveness of the measures in terms of ecological impact. Knowledge rules are used to describe the relationships between these data in order to compute the flux concentrations or to compute the effectiveness of measures. The management tool specifically addresses nitrate pollution and pollution by organic micropollutants. Detailed models are also used to predict the effectiveness of site remedial technologies using readily available global data. Rules describing ecological impacts are derived from ecotoxicological data for (mixtures of) specific contaminants (msPAF) and ecological indices relating effects to the presence of certain contaminants. Rules describing the cost-effectiveness of measures are derived from linear programming models identifying the least-cost combination of abatement measures to satisfy multi-pollutant reduction targets and from multi-criteria analysis.

Prospective economic evaluation of an electronic discharge communication tool: analysis of a randomised controlled trial

PubMed Central

Sevick, Laura K; Santana, Maria-Jose; Ghali, William A; Clement, Fiona

2017-01-01

Objective To complete an economic evaluation within a randomised controlled trial (RCT) comparing the use of an electronic discharge communication tool (eDCT) compared with usual care. Setting Patients being discharged from a single tertiary care centre’s internal medicine Medical Teaching Units. Participants Between January 2012 and December 2013, 1399 patients were randomised to a discharge mechanism. Forty-five patients were excluded from the economic evaluation as they did not have data for the index hospitalisation cost; 1354 patients contributed to the economic evaluation. Intervention eDCT generated at discharge containing structured content on reason for admission, details of the hospital stay, treatments received and follow-up care required. The control group was discharged via traditional dictation methods. Primary and secondary outcome measures The primary economic outcome was the cost per quality-adjusted life year (QALY) gained. Secondary outcomes included the cost per death avoided and the cost per readmission avoided. Results The average transcription cost was $C22.28 per patient, whereas the estimated cost of the eDCT was $C13.33 per patient. The cost per QALY gained was $C239 933 in the eDCT arm compared with usual care due to the very small gains in effectiveness and approximately $C800difference in resource utilisation costs. The bootstrap analyses resulted in eDCT being more effective and more costly in 29.2% of samples, less costly and more effective in 29.2% of samples, less effective and more costly in 23.9% of samples and finally, less costly and less effective in 17.7% of samples. Conclusions The eDCT reduced per patient costs of the generation of discharge summaries. The bootstrap estimates demonstrate considerable uncertainty supporting the finding of neutrality reported in the clinical component of the RCT. The immediate transcription cost savings and previously documented provider and patient satisfaction may increase the impetus for organisations to invest in such systems, provided they have a foundation of eHealth infrastructure and readiness. Trial registration number NCT01402609. PMID:29247110

System capacity and economic modeling computer tool for satellite mobile communications systems

NASA Technical Reports Server (NTRS)

Wiedeman, Robert A.; Wen, Doong; Mccracken, Albert G.

1988-01-01

A unique computer modeling tool that combines an engineering tool with a financial analysis program is described. The resulting combination yields a flexible economic model that can predict the cost effectiveness of various mobile systems. Cost modeling is necessary in order to ascertain if a given system with a finite satellite resource is capable of supporting itself financially and to determine what services can be supported. Personal computer techniques using Lotus 123 are used for the model in order to provide as universal an application as possible such that the model can be used and modified to fit many situations and conditions. The output of the engineering portion of the model consists of a channel capacity analysis and link calculations for several qualities of service using up to 16 types of earth terminal configurations. The outputs of the financial model are a revenue analysis, an income statement, and a cost model validation section.

Feasibility study tool for semi-rigid joints design of high-rise buildings steel structures

NASA Astrophysics Data System (ADS)

Bagautdinov, Ruslan; Monastireva, Daria; Bodak, Irina; Potapova, Irina

2018-03-01

There are many ways to consider the final cost of the high-rise building structures and to define, which of their different variations are the most effective from different points of view. The research of Jaakko Haapio is conducted in Tampere University of Technology, which aims to develop a method that allows determining the manufacturing and installation costs of steel structures already at the tender phase while taking into account their details. This paper is aimed to make the analysis of the Feature-Based Costing Method for skeletal steel structures proposed by Jaakko Haapio. The most appropriate ways to improve the tool and to implement it in the Russian circumstances for high-rise building design are derived. Presented tool can be useful not only for the designers but, also, for the steel structures manufacturing organizations, which can help to utilize BIM technologies in the organization process and controlling on the factory.

Performance measurement: A tool for program control

NASA Technical Reports Server (NTRS)

Abell, Nancy

1994-01-01

Performance measurement is a management tool for planning, monitoring, and controlling as aspects of program and project management--cost, schedule, and technical requirements. It is a means (concept and approach) to a desired end (effective program planning and control). To reach the desired end, however, performance measurement must be applied and used appropriately, with full knowledge and recognition of its power and of its limitations--what it can and cannot do for the project manager. What is the potential of this management tool? What does performance measurement do that a traditional plan vs. actual technique cannot do? Performance measurement provides an improvement over the customary comparison of how much money was spent (actual cost) vs. how much was planned to be spent based on a schedule of activities (work planned). This commonly used plan vs. actual comparison does not allow one to know from the numerical data if the actual cost incurred was for work intended to be done.

Investigation of Low Cost Sensor-Based Leak Detection System for Fence Line Applications

EPA Science Inventory

With recent technological advances, low-cost time-resolved sensors may become effective tools to support time-integrated passive sampling strategies by helping to decipher origin of emissions in real-time. As part of the Petroleum Refinery Risk and Technology Review, New Source ...

Minimising post-operative risk using a Post-Anaesthetic Care Tool (PACT): protocol for a prospective observational study and cost-effectiveness analysis

PubMed Central

Phillips, Nicole M; Kent, Bridie; Colgan, Stephen; Mohebbi, Mohammadreza

2015-01-01

Introduction While the risk of adverse events following surgery has been identified, the impact of nursing care on early detection of these events is not well established. A systematic review of the evidence and an expert consensus study in post-anaesthetic care identified essential criteria for nursing assessment of patient readiness for discharge from the post-anaesthetic care unit (PACU). These criteria were included in a new nursing assessment tool, the Post-Anaesthetic Care Tool (PACT), and incorporated into the post-anaesthetic documentation at a large health service. The aim of this study is to test the clinical reliability of the PACT and evaluate whether the use of PACT will (1) enhance the recognition and response to patients at risk of deterioration in PACU; (2) improve documentation for handover from PACU nurse to ward nurse; (3) result in improved patient outcomes and (4) reduce healthcare costs. Methods and analysis A prospective, non-randomised, pre-implementation and post-implementation design comparing: (1) patients (n=750) who have surgery prior to the implementation of the PACT and (2) patients (n=750) who have surgery after PACT. The study will examine the use of the tool through the observation of patient care and nursing handover. Patient outcomes and cost-effectiveness will be determined from health service data and medical record audit. Descriptive statistics will be used to describe the sample and compare the two patient groups (pre-intervention and post-intervention). Differences in patient outcomes between the two groups will be compared using the Cochran-Mantel-Haenszel test and regression analyses and reported as ORs with the corresponding 95% CIs. Conclusions This study will test the clinical reliability and cost-effectiveness of the PACT. It is hypothesised that the PACT will enable nurses to recognise and respond to patients at risk of deterioration, improve handover to ward nurses, improve patient outcomes, and reduce healthcare costs. PMID:26033942

78 FR 69839 - Building Technologies Office Prioritization Tool

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... innovative and cost-effective energy saving solutions: Supporting research and development of high impact... Description The tool was designed to inform programmatic decision-making and facilitate the setting of... quantitative analysis to assure only the highest impact measures are the focus of further effort. The approach...

CMOST: an open-source framework for the microsimulation of colorectal cancer screening strategies.

PubMed

Prakash, Meher K; Lang, Brian; Heinrich, Henriette; Valli, Piero V; Bauerfeind, Peter; Sonnenberg, Amnon; Beerenwinkel, Niko; Misselwitz, Benjamin

2017-06-05

Colorectal cancer (CRC) is a leading cause of cancer-related mortality. CRC incidence and mortality can be reduced by several screening strategies, including colonoscopy, but randomized CRC prevention trials face significant obstacles such as the need for large study populations with long follow-up. Therefore, CRC screening strategies will likely be designed and optimized based on computer simulations. Several computational microsimulation tools have been reported for estimating efficiency and cost-effectiveness of CRC prevention. However, none of these tools is publicly available. There is a need for an open source framework to answer practical questions including testing of new screening interventions and adapting findings to local conditions. We developed and implemented a new microsimulation model, Colon Modeling Open Source Tool (CMOST), for modeling the natural history of CRC, simulating the effects of CRC screening interventions, and calculating the resulting costs. CMOST facilitates automated parameter calibration against epidemiological adenoma prevalence and CRC incidence data. Predictions of CMOST were highly similar compared to a large endoscopic CRC prevention study as well as predictions of existing microsimulation models. We applied CMOST to calculate the optimal timing of a screening colonoscopy. CRC incidence and mortality are reduced most efficiently by a colonoscopy between the ages of 56 and 59; while discounted life years gained (LYG) is maximal at 49-50 years. With a dwell time of 13 years, the most cost-effective screening is at 59 years, at $17,211 discounted USD per LYG. While cost-efficiency varied according to dwell time it did not influence the optimal time point of screening interventions within the tested range. Predictions of CMOST are highly similar compared to a randomized CRC prevention trial as well as those of other microsimulation tools. This open source tool will enable health-economics analyses in for various countries, health-care scenarios and CRC prevention strategies. CMOST is freely available under the GNU General Public License at https://gitlab.com/misselwb/CMOST.

Operations management tools to be applied for textile

NASA Astrophysics Data System (ADS)

Maralcan, A.; Ilhan, I.

2017-10-01

In this paper, basic concepts of process analysis such as flow time, inventory, bottleneck, labour cost and utilization are illustrated first. The effect of bottleneck on the results of a business are especially emphasized. In the next section, tools on productivity measurement; KPI (Key Performance Indicators) Tree, OEE (Overall Equipment Effectiveness) and Takt Time are introduced and exemplified. KPI tree is a diagram on which we can visualize all the variables of an operation which are driving financial results through cost and profit. OEE is a tool to measure a potential extra capacity of an equipment or an employee. Takt time is a tool to determine the process flow rate according to the customer demand. KPI tree is studied through the whole process while OEE is exemplified for a stenter frame machine which is the most important machine (and usually the bottleneck) and the most expensive investment in a finishing plant. Takt time is exemplified for the quality control department. Finally quality tools, six sigma, control charts and jidoka are introduced. Six sigma is a tool to measure process capability and by the way probability of a defect. Control chart is a powerful tool to monitor the process. The idea of jidoka (detect, stop and alert) is about alerting the people that there is a problem in the process.

COSTMODL: An automated software development cost estimation tool

NASA Technical Reports Server (NTRS)

Roush, George B.

1991-01-01

The cost of developing computer software continues to consume an increasing portion of many organizations' total budgets, both in the public and private sector. As this trend develops, the capability to produce reliable estimates of the effort and schedule required to develop a candidate software product takes on increasing importance. The COSTMODL program was developed to provide an in-house capability to perform development cost estimates for NASA software projects. COSTMODL is an automated software development cost estimation tool which incorporates five cost estimation algorithms including the latest models for the Ada language and incrementally developed products. The principal characteristic which sets COSTMODL apart from other software cost estimation programs is its capacity to be completely customized to a particular environment. The estimation equations can be recalibrated to reflect the programmer productivity characteristics demonstrated by the user's organization, and the set of significant factors which effect software development costs can be customized to reflect any unique properties of the user's development environment. Careful use of a capability such as COSTMODL can significantly reduce the risk of cost overruns and failed projects.

Reducing duplicate testing: a comparison of two clinical decision support tools.

PubMed

Procop, Gary W; Keating, Catherine; Stagno, Paul; Kottke-Marchant, Kandice; Partin, Mary; Tuttle, Robert; Wyllie, Robert

2015-05-01

Unnecessary duplicate laboratory testing is common and costly. Systems-based means to avert unnecessary testing should be investigated and employed. We compared the effectiveness and cost savings associated with two clinical decision support tools to stop duplicate testing. The Hard Stop required telephone contact with the laboratory and justification to have the duplicate test performed, whereas the Smart Alert allowed the provider to bypass the alert at the point of order entry without justification. The Hard Stop alert was significantly more effective than the Smart Alert (92.3% vs 42.6%, respectively; P < .0001). The cost savings realized per alert activation was $16.08/alert for the Hard Stop alert vs $3.52/alert for the Smart Alert. Structural and process changes that require laboratory contact and justification for duplicate testing are more effective than interventions that allow providers to bypass alerts without justification at point of computerized physician order entry. Copyright© by the American Society for Clinical Pathology.

Contract management using cause-effect clues in service worksheets.

PubMed

Chen, J H

1996-01-01

Sophisticated equipment often needs intensive technical resources to maintain its system availability. Service contracts can be an easy channel to outside technical resources. Usually, a service contract purchaser only sees its cost instead of its maintenance quality. A system's needs, however, depend on the trade-off between the cost paid and the quality received. If a clinical engineer can actively interpret and integrate the cause-effect consequences on the compiled service worksheets, those clues can serve as a criterion to justify the quality and the cost-effectiveness of a service contract. Through the analysis of the service labor consumed, the justification of the parts replaced, and the assessment of the "fit" to system availability, this paper provides a cost-effective tool for equipment management.

The Biobank Economic Modeling Tool (BEMT): Online Financial Planning to Facilitate Biobank Sustainability

PubMed Central

Odeh, Hana; Miranda, Lisa; Rao, Abhi; Vaught, Jim; Greenman, Howard; McLean, Jeffrey; Reed, Daniel; Memon, Sarfraz; Fombonne, Benjamin; Guan, Ping

2015-01-01

Background: Biospecimens are essential resources for advancing basic and translational research. However, there are little data available regarding the costs associated with operating a biobank, and few resources to enable their long-term sustainability. To support the research community in this effort, the National Institutes of Health, National Cancer Institute's Biorepositories and Biospecimen Research Branch has developed the Biobank Economic Modeling Tool (BEMT). The tool is accessible at http://biospecimens.cancer.gov/resources/bemt.asp. Methods: To obtain market-based cost information and to inform the development of the tool, a survey was designed and sent to 423 biobank managers and directors across the world. The survey contained questions regarding infrastructure investments, salary costs, funding options, types of biospecimen resources and services offered, as well as biospecimen pricing and service-related costs. Results: A total of 106 responses were received. The data were anonymized, aggregated, and used to create a comprehensive database of cost and pricing information that was integrated into the web-based tool, the BEMT. The BEMT was built to allow the user to input cost and pricing data through a seven-step process to build a cost profile for their biobank, define direct and indirect costs, determine cost recovery fees, perform financial forecasting, and query the anonymized survey data from comparable biobanks. Conclusion: A survey was conducted to obtain a greater understanding of the costs involved in operating a biobank. The anonymized survey data was then used to develop the BEMT, a cost modeling tool for biobanks. Users of the tool will be able to create a cost profile for their biobanks' specimens, products and services, establish pricing, and allocate costs for biospecimens based on percent cost recovered, and perform project-specific cost analyses and financial forecasting. PMID:26697911

The Biobank Economic Modeling Tool (BEMT): Online Financial Planning to Facilitate Biobank Sustainability.

PubMed

Odeh, Hana; Miranda, Lisa; Rao, Abhi; Vaught, Jim; Greenman, Howard; McLean, Jeffrey; Reed, Daniel; Memon, Sarfraz; Fombonne, Benjamin; Guan, Ping; Moore, Helen M

2015-12-01

Biospecimens are essential resources for advancing basic and translational research. However, there are little data available regarding the costs associated with operating a biobank, and few resources to enable their long-term sustainability. To support the research community in this effort, the National Institutes of Health, National Cancer Institute's Biorepositories and Biospecimen Research Branch has developed the Biobank Economic Modeling Tool (BEMT). The tool is accessible at http://biospecimens.cancer.gov/resources/bemt.asp. To obtain market-based cost information and to inform the development of the tool, a survey was designed and sent to 423 biobank managers and directors across the world. The survey contained questions regarding infrastructure investments, salary costs, funding options, types of biospecimen resources and services offered, as well as biospecimen pricing and service-related costs. A total of 106 responses were received. The data were anonymized, aggregated, and used to create a comprehensive database of cost and pricing information that was integrated into the web-based tool, the BEMT. The BEMT was built to allow the user to input cost and pricing data through a seven-step process to build a cost profile for their biobank, define direct and indirect costs, determine cost recovery fees, perform financial forecasting, and query the anonymized survey data from comparable biobanks. A survey was conducted to obtain a greater understanding of the costs involved in operating a biobank. The anonymized survey data was then used to develop the BEMT, a cost modeling tool for biobanks. Users of the tool will be able to create a cost profile for their biobanks' specimens, products and services, establish pricing, and allocate costs for biospecimens based on percent cost recovered, and perform project-specific cost analyses and financial forecasting.

A generalized concept for cost-effective structural design. [Statistical Decision Theory applied to aerospace systems

NASA Technical Reports Server (NTRS)

Thomas, J. M.; Hawk, J. D.

1975-01-01

A generalized concept for cost-effective structural design is introduced. It is assumed that decisions affecting the cost effectiveness of aerospace structures fall into three basic categories: design, verification, and operation. Within these basic categories, certain decisions concerning items such as design configuration, safety factors, testing methods, and operational constraints are to be made. All or some of the variables affecting these decisions may be treated probabilistically. Bayesian statistical decision theory is used as the tool for determining the cost optimum decisions. A special case of the general problem is derived herein, and some very useful parametric curves are developed and applied to several sample structures.

Do We Really Know how Much it Costs to Construct High Performance Buildings?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Olga V.; Dillon, Heather E.; Halverson, Mark A.

2012-08-31

Understanding the cost of energy efficient construction is critical to decision makers in building design, code development, and energy analysis. How much does it cost to upgrade from R-13 to R-19 in a building wall? How much do low-e windows really cost? Can we put a dollar figure on commissioning? Answers to these questions have a fuzzy nature, based on educated guesses and industry lore. The response depends on location, perspective, bulk buying, and hand waving. This paper explores the development of a web tool intended to serve as a publicly available repository of building component costs. In 2011 themore » U.S. Department of Energy (DOE) funded the launch of a web tool called the Building Component Cost Community (BC3), dedicated to publishing building component costs from documented sources, actively gathering verifiable cost data from the users, and collecting feedback from a wide range of participants on the quality of the posted cost data. The updated BC3 database, available at http://bc3.pnnl.gov, went live on April 30, 2012. BC3 serves as the ultimate source of the energy-related component costs for DOE’s residential code development activities, including cost-effectiveness analyses. The paper discusses BC3 objectives, structure, functionality and the current content of the database. It aims to facilitate a dialog about the lack of verifiable transparent cost data, as well as introduce a web tool that helps to address the problem. The questions posed above will also be addressed by this paper, but they have to be resolved by the user community by providing feedback and cost data to the BC3 database, thus increasing transparency and removing information asymmetry.« less

Investigation of a Low Cost Sensor-Based Leak Detection System for Fence Line Applications

EPA Science Inventory

With recent technological advances, low-cost time-resolved sensors may become effective tools to support time-integrated passive sampling strategies by helping to decipher origin of emissions in real-time. As part of the Petroleum Refinery Risk and Technology Review, New Source P...

Economic Modeling as a Component of Academic Strategic Planning.

ERIC Educational Resources Information Center

MacKinnon, Joyce; Sothmann, Mark; Johnson, James

2001-01-01

Computer-based economic modeling was used to enable a school of allied health to define outcomes, identify associated costs, develop cost and revenue models, and create a financial planning system. As a strategic planning tool, it assisted realistic budgeting and improved efficiency and effectiveness. (Contains 18 references.) (SK)

A decision support tool to determine cost-to-benefit of a family-centered in-home program for at-risk adolescents.

PubMed

Wilson, Fernando A; Araz, Ozgur M; Thompson, Ronald W; Ringle, Jay L; Mason, W Alex; Stimpson, Jim P

2016-06-01

Family-centered program research has demonstrated its effectiveness in improving adolescent outcomes. However, given current fiscal constraints faced by governmental agencies, a recent report from the Institute of Medicine and National Research Council highlighted the need for cost-benefit analyses to inform decision making by policymakers. Furthermore, performance management tools such as balanced scorecards and dashboards do not generally include cost-benefit analyses. In this paper, we describe the development of an Excel-based decision support tool that can be used to evaluate a selected family-based program for at-risk children and adolescents relative to a comparison program or the status quo. This tool incorporates the use of an efficient, user-friendly interface with results provided in concise tabular and graphical formats that may be interpreted without need for substantial training in economic evaluation. To illustrate, we present an application of this tool to evaluate use of Boys Town's In-Home Family Services (IHFS) relative to detention and out-of-home placement in New York City. Use of the decision support tool can help mitigate the need for programs to contract experts in economic evaluation, especially when there are financial or time constraints. Copyright © 2016 Elsevier Ltd. All rights reserved.

Applications of Online Instruction: An Overview for Teachers, Students with Mild Disabilities, and Their Parents.

ERIC Educational Resources Information Center

Smith, Sean J.; Meyen, Edward L.

2003-01-01

This article describes online instruction in the context of online technologies, instructional environment, and home environment of students with disabilities. Topics covered include advantages, cost effectiveness, Web accessibility, universal design for learning, tools for accessing and organizing resources, tools for communication, learning…

Integrating Transportation Modeling and Desktop GIS: A Practical and Affordable Analysis Tool for Small and Medium Sized Communities

DOT National Transportation Integrated Search

1998-09-16

This paper and presentation discuss some of the benefits of integrating travel : demand models and desktop GIS (ArchInfo and ArcView for PCs) as a : cost-effective and staff saving tool, as well as specific improvements to : transportation planning m...

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-06-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.« less

Costing maternal health services in South Tanzania: a case study from Mtwara Urban District.

PubMed

von Both, Claudia; Jahn, Albrecht; Fleba, Steffen

2008-05-01

The following paper presents the methodology and results of a costing exercise of maternal health services in Tanzania. The main objective of this study was to determine the actual costs of antenatal and obstetric care in different health institutions in a district in Tanzania as a basis of more efficient resource allocation. A costing tool was developed that allows the calculation of costs of service units, such as deliveries and antenatal care, and separates these costs from the costs of other services. Time consumed by each activity was used as an allocation key. For that purpose, we recorded the personnel consumption with different time-study methodologies. This approach was tested and implemented in Mtwara Urban District, South Tanzania. The results were analyzed by a spreadsheet program. The paper presents average costs for different costing units of maternal care. Among other findings, we found that the cost of a normal vaginal delivery is US $12.30 in a dispensary and US $6.30 in the hospital--a result that needs explanation, as usually one would expect that hospitals are more cost-intensive than first-line facilities. However, dispensaries are grossly underutilized so that the costs per service unit are rather high. The cost for surgical delivery (only in hospitals) was found to be US $69.26 and the average cost per antenatal care consultation (only at dispensaries) was US $2.50. We conclude that improved planning of elective services is a prerequisite for more effective and efficient use of personnel resources. In addition, the definition of medically and economically sound standards, in particular staffing standards, is critical to make cost analysis an effective management tool to guide rational resource allocation.

Pros, Cons, and Alternatives to Weight Based Cost Estimating

NASA Technical Reports Server (NTRS)

Joyner, Claude R.; Lauriem, Jonathan R.; Levack, Daniel H.; Zapata, Edgar

2011-01-01

Many cost estimating tools use weight as a major parameter in projecting the cost. This is often combined with modifying factors such as complexity, technical maturity of design, environment of operation, etc. to increase the fidelity of the estimate. For a set of conceptual designs, all meeting the same requirements, increased weight can be a major driver in increased cost. However, once a design is fixed, increased weight generally decreases cost, while decreased weight generally increases cost - and the relationship is not linear. Alternative approaches to estimating cost without using weight (except perhaps for materials costs) have been attempted to try to produce a tool usable throughout the design process - from concept studies through development. This paper will address the pros and cons of using weight based models for cost estimating, using liquid rocket engines as the example. It will then examine approaches that minimize the impct of weight based cost estimating. The Rocket Engine- Cost Model (RECM) is an attribute based model developed internally by Pratt & Whitney Rocketdyne for NASA. RECM will be presented primarily to show a successful method to use design and programmatic parameters instead of weight to estimate both design and development costs and production costs. An operations model developed by KSC, the Launch and Landing Effects Ground Operations model (LLEGO), will also be discussed.

A digital flight control system verification laboratory

NASA Technical Reports Server (NTRS)

De Feo, P.; Saib, S.

1982-01-01

A NASA/FAA program has been established for the verification and validation of digital flight control systems (DFCS), with the primary objective being the development and analysis of automated verification tools. In order to enhance the capabilities, effectiveness, and ease of using the test environment, software verification tools can be applied. Tool design includes a static analyzer, an assertion generator, a symbolic executor, a dynamic analysis instrument, and an automated documentation generator. Static and dynamic tools are integrated with error detection capabilities, resulting in a facility which analyzes a representative testbed of DFCS software. Future investigations will ensue particularly in the areas of increase in the number of software test tools, and a cost effectiveness assessment.

Design Tools for Cost-Effective Implementation of Planetary Protection Requirements

NASA Technical Reports Server (NTRS)

Hamlin, Louise; Belz, Andrea; Evans, Michael; Kastner, Jason; Satter, Celeste; Spry, Andy

2006-01-01

Since the Viking missions to Mars in the 1970s, accounting for the costs associated with planetary protection implementation has not been done systematically during early project formulation phases, leading to unanticipated costs during subsequent implementation phases of flight projects. The simultaneous development of more stringent planetary protection requirements, resulting from new knowledge about the limits of life on Earth, together with current plans to conduct life-detection experiments on a number of different solar system target bodies motivates a systematic approach to integrating planetary protection requirements and mission design. A current development effort at NASA's Jet Propulsion Laboratory is aimed at integrating planetary protection requirements more fully into the early phases of mission architecture formulation and at developing tools to more rigorously predict associated cost and schedule impacts of architecture options chosen to meet planetary protection requirements.

Fast and cheap fabrication of molding tools for polymer replication

NASA Astrophysics Data System (ADS)

Richter, Christiane; Kirschner, Nadine; Worgull, Matthias; Rapp, Bastian E.

2017-02-01

Polymer replication is a prerequisite for low-cost microstructure components for consumer and end user market. The production of cost-effective microstructure in polymers requires metal molding tools which are often fabricated by direct structuring methods like milling or laser machining both of which are time-consuming and cost-intensive. We present an alternative fabrication method based on replication processes which allows the cheap ( 50 €) and fast ( 12 h) replication of complex microstructures into metal. The process comprises three steps: 1. Generation of the microstructure in a photoresist via lithography. 2. Casting of the structure into a high-temperature silicone which serves as original mold for creation of the metal molding tool. 3. Melting of an eutectic alloy of Sn, Ag and Cu under light pressure directly inside of the silicone within an oven. After cooling to room temperature the metal molding tool can be used for polymer replication into conventional thermoplastic polymers. As a first example we structured polymethylmethacrylate (PMMA) foils with a thickness of 1 mm via hot embossing and feature sizes of 100 μm could be replicated with high fidelity.

NASA Instrument Cost/Schedule Model

NASA Technical Reports Server (NTRS)

Habib-Agahi, Hamid; Mrozinski, Joe; Fox, George

2011-01-01

NASA's Office of Independent Program and Cost Evaluation (IPCE) has established a number of initiatives to improve its cost and schedule estimating capabilities. 12One of these initiatives has resulted in the JPL developed NASA Instrument Cost Model. NICM is a cost and schedule estimator that contains: A system level cost estimation tool; a subsystem level cost estimation tool; a database of cost and technical parameters of over 140 previously flown remote sensing and in-situ instruments; a schedule estimator; a set of rules to estimate cost and schedule by life cycle phases (B/C/D); and a novel tool for developing joint probability distributions for cost and schedule risk (Joint Confidence Level (JCL)). This paper describes the development and use of NICM, including the data normalization processes, data mining methods (cluster analysis, principal components analysis, regression analysis and bootstrap cross validation), the estimating equations themselves and a demonstration of the NICM tool suite.

[Economic evaluation and rationale for human health risk management decisions].

PubMed

Fokin, S G; Bobkova, T E

2011-01-01

The priority task of human health maintenance and improvement is risk management using the new economic concepts based on the assessment of potential and real human risks from exposure to poor environmental factors and on the estimation of cost-benefit and cost-effectiveness ratios. The application of economic tools to manage a human risk makes it possible to assess various measures both as a whole and their individual priority areas, to rank different scenarios in terms of their effectiveness, to estimate costs per unit of risk reduction and benefit increase (damage decrease).

Telemonitoring for chronic obstructive pulmonary disease: a cost and cost-utility analysis of a randomised controlled trial.

PubMed

Stoddart, Andrew; van der Pol, Marjon; Pinnock, Hilary; Hanley, Janet; McCloughan, Lucy; Todd, Allison; Krishan, Ashma; McKinstry, Brian

2015-03-01

We compared the costs and cost-effectiveness of telemonitoring vs usual care for patients with chronic obstructive pulmonary disease (COPD). A total of 256 patients were randomised to either telemonitoring or usual care. In the telemonitoring arm, the touch-screen telemonitoring equipment transmitted data to clinical teams monitoring the patients. Total healthcare costs were estimated over a 12-month period from a National Health Service perspective and quality adjusted life year (QALYs) were estimated by the EQ-5D tool. Telemonitoring was not significantly more costly than usual care (mean difference per patient £2065.90 (P < 0.18). The increased costs were predominantly due to telemonitoring service costs and non-significantly higher secondary care costs. Telemonitoring for COPD was not cost-effective at a base case of £137,277 per QALY with only 15% probability of being cost-effective at the usual threshold of £30,000 per QALY. Although there was some statistical and methodological uncertainty in the measures used, telemonitoring was not cost-effective in the sensitivity analyses performed. It seems unlikely that a telemonitoring service of the kind that was trialled would be cost-effective in providing care for people with COPD. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

A novel methodology for estimating upper limits of major cost drivers for profitable conceptual launch system architectures

NASA Astrophysics Data System (ADS)

Rhodes, Russel E.; Byrd, Raymond J.

1998-01-01

This paper presents a ``back of the envelope'' technique for fast, timely, on-the-spot, assessment of affordability (profitability) of commercial space transportation architectural concepts. The tool presented here is not intended to replace conventional, detailed costing methodology. The process described enables ``quick look'' estimations and assumptions to effectively determine whether an initial concept (with its attendant cost estimating line items) provides focus for major leapfrog improvement. The Cost Charts Users Guide provides a generic sample tutorial, building an approximate understanding of the basic launch system cost factors and their representative magnitudes. This process will enable the user to develop a net ``cost (and price) per payload-mass unit to orbit'' incorporating a variety of significant cost drivers, supplemental to basic vehicle cost estimates. If acquisition cost and recurring cost factors (as a function of cost per payload-mass unit to orbit) do not meet the predetermined system-profitability goal, the concept in question will be clearly seen as non-competitive. Multiple analytical approaches, and applications of a variety of interrelated assumptions, can be examined in a quick, (on-the-spot) cost approximation analysis as this tool has inherent flexibility. The technique will allow determination of concept conformance to system objectives.

Development of a Cost Estimation Process for Human Systems Integration Practitioners During the Analysis of Alternatives

DTIC Science & Technology

2010-12-01

processes. Novice estimators must often use of these complicated cost estimation tools (e.g., ACEIT , SEER-H, SEER-S, PRICE-H, PRICE-S, etc.) until...However, the thesis will leverage the processes embedded in cost estimation tools such as the Automated Cost Estimating Integration Tool ( ACEIT ) and the

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

NASA Astrophysics Data System (ADS)

Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

2017-09-01

The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

Integrated modeling approach for optimal management of water, energy and food security nexus

NASA Astrophysics Data System (ADS)

Zhang, Xiaodong; Vesselinov, Velimir V.

2017-03-01

Water, energy and food (WEF) are inextricably interrelated. Effective planning and management of limited WEF resources to meet current and future socioeconomic demands for sustainable development is challenging. WEF production/delivery may also produce environmental impacts; as a result, green-house-gas emission control will impact WEF nexus management as well. Nexus management for WEF security necessitates integrated tools for predictive analysis that are capable of identifying the tradeoffs among various sectors, generating cost-effective planning and management strategies and policies. To address these needs, we have developed an integrated model analysis framework and tool called WEFO. WEFO provides a multi-period socioeconomic model for predicting how to satisfy WEF demands based on model inputs representing productions costs, socioeconomic demands, and environmental controls. WEFO is applied to quantitatively analyze the interrelationships and trade-offs among system components including energy supply, electricity generation, water supply-demand, food production as well as mitigation of environmental impacts. WEFO is demonstrated to solve a hypothetical nexus management problem consistent with real-world management scenarios. Model parameters are analyzed using global sensitivity analysis and their effects on total system cost are quantified. The obtained results demonstrate how these types of analyses can be helpful for decision-makers and stakeholders to make cost-effective decisions for optimal WEF management.

Negative Pressure Wound Therapy Literature Review of Efficacy, Cost Effectiveness, and Impact on Patients' Quality of Life in Chronic Wound Management and Its Implementation in the United Kingdom

PubMed Central

Othman, Diaa

2012-01-01

This is a paper reviewing the National Health Service (NHS) agenda in relation to the use of Negative Pressure Wound Therapy (NPWT) in chronic wound management and assesses the evidence behind it, its cost effectiveness and the outcome it has on patients' satisfaction and life style. Multiple studies over the last 10 years looking at clinical efficacy of NPWT with its cost effectiveness and the implementation of this service in the UK were reviewed. NPWT has showed a reasonable body of evidence to support its usage in chronic wounds with potential positive outcomes on finance and patients' satisfaction. However, the NHS system shows significant variations in the availability and implementation of this useful tool, depending on care providers and resources availabilities. The paper concluded that the NPWT can be a useful source of cutting down costs of chronic wound managements and saving money by its effect on expediting wound healing, which can address a part of the financial crises facing the NHS, however, has to be considered according to specific case needs. There should also be a national standard for the availability and indication of this tool to assure equal opportunities for different patients in different areas in the country. PMID:22701169

Fault Tolerant Considerations and Methods for Guidance and Control Systems

DTIC Science & Technology

1987-07-01

multifunction devices such as microprocessors with software. In striving toward the economic goal, however, a cost is incurred in a different coin, i.e...therefore been developed which reduces the software risk to acceptable proportions. Several of the techniques thus developed incur no significant cost ...complex that their design and implementation need computerized tools in order to be cost -effective (in a broad sense, including the capability of

Multi-criteria analysis for PM10 planning

NASA Astrophysics Data System (ADS)

Pisoni, Enrico; Carnevale, Claudio; Volta, Marialuisa

To implement sound air quality policies, Regulatory Agencies require tools to evaluate outcomes and costs associated to different emission reduction strategies. These tools are even more useful when considering atmospheric PM10 concentrations due to the complex nonlinear processes that affect production and accumulation of the secondary fraction of this pollutant. The approaches presented in the literature (Integrated Assessment Modeling) are mainly cost-benefit and cost-effective analysis. In this work, the formulation of a multi-objective problem to control particulate matter is proposed. The methodology defines: (a) the control objectives (the air quality indicator and the emission reduction cost functions); (b) the decision variables (precursor emission reductions); (c) the problem constraints (maximum feasible technology reductions). The cause-effect relations between air quality indicators and decision variables are identified tuning nonlinear source-receptor models. The multi-objective problem solution provides to the decision maker a set of not-dominated scenarios representing the efficient trade-off between the air quality benefit and the internal costs (emission reduction technology costs). The methodology has been implemented for Northern Italy, often affected by high long-term exposure to PM10. The source-receptor models used in the multi-objective analysis are identified processing long-term simulations of GAMES multiphase modeling system, performed in the framework of CAFE-Citydelta project.

Cost Validation Using PRICE H

NASA Technical Reports Server (NTRS)

Jack, John; Kwan, Eric; Wood, Milana

2011-01-01

PRICE H was introduced into the JPL cost estimation tool set circa 2003. It became more available at JPL when IPAO funded the NASA-wide site license for all NASA centers. PRICE H was mainly used as one of the cost tools to validate proposal grassroots cost estimates. Program offices at JPL view PRICE H as an additional crosscheck to Team X (JPL Concurrent Engineering Design Center) estimates. PRICE H became widely accepted ca, 2007 at JPL when the program offices moved away from grassroots cost estimation for Step 1 proposals. PRICE H is now one of the key cost tools used for cost validation, cost trades, and independent cost estimates.

A tool for cost-effectiveness analysis of field scale sediment-bound phosphorus mitigation measures and application to analysis of spatial and temporal targeting in the Lunan Water catchment, Scotland.

PubMed

Vinten, Andy; Sample, James; Ibiyemi, Adekunle; Abdul-Salam, Yakubu; Stutter, Marc

2017-05-15

The cost-effectiveness of six edge-of-field measures for mitigating diffuse pollution from sediment bound phosphorus (P) runoff from temperate arable farmland is analysed at catchment/field scales. These measures were: buffer strips, permanent grassland in the lowest 7% of arable fields, dry detention bunds, wetlands, and temporary barriers such as sediment fences. Baseline field P export was estimated using export coefficients (low risk crops) or a modified Universal Soil Loss Equation (high risk crops). The impact of measures was estimated using simple equations. Costs were estimated from gross margin losses or local data on grants. We used a net cost:benefit (NCB) factor to normalise the costs and impacts of each measure over time. Costs minimisation for target impact was done using PuLP, a linear programming module for Python, across 1634 riparian and non-riparian fields in the Lunan Water, a mixed arable catchment in Eastern Scotland. With all measures in place, average cost-effectiveness increases from £9 to £48/kg P as target P mitigation increases from 500 to 2500kg P across the catchment. Costs increase significantly when the measures available are restricted only to those currently eligible for government grants (buffers, bunds and wetlands). The assumed orientation of the average field slope makes a strong difference to the potential for storage of water by bunds and overall cost-effectiveness, but the non-funded measures can substitute for the extra expense incurred by bunds, where the slope orientation is not suitable. Economic discounting over time of impacts and costs of measures favours those measures, such as sediment fences, which are strongly targeted both spatially and temporally. This tool could be a useful guide for dialogue with land users about the potential fields to target for mitigation to achieve catchment targets. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Improvement of Computer Software Quality through Software Automated Tools.

DTIC Science & Technology

1986-08-31

requirement for increased emphasis on software quality assurance has lead to the creation of various methods of verification and validation. Experience...result was a vast array of methods , systems, languages and automated tools to assist in the process. Given that the primary role of quality assurance is...Unfortunately, there is no single method , tool or technique that can insure accurate, reliable and cost effective software. Therefore, government and industry

Influence of die geometry and material selection on the behavior of protective die covers in closed-die forging

NASA Astrophysics Data System (ADS)

Yu, Yingyan; Rosenstock, Dirk; Wolfgarten, Martin; Hirt, Gerhard

2016-10-01

Due to the fact that tooling costs make up to 30% of total costs of the final forged part, the tool life is always one main research topic in closed-die forging [1]. To improve the wear resistance of forging dies, many methods like nitriding and deposition of ceramic layers have been used. However, all these methods will lose its effect after a certain time, then tool repair or exchange is needed, which requires additional time and costs. A new method, which applies an inexpensive and changeable sheet metal on the forging die to protect it from abrasive wear, was firstly proposed in [2]. According to the first investigation, the die cover is effective for decreasing thermal and mechanical loads, but there are still several challenges to overcome in this concept, like wrinkling and thinning of the die cover. Therefore, an experimental study using different geometries and die cover materials is presented within this work. The results indicate the existence of feasible application cases of this concept, since conditions are found under which a die cover made of 22MnB5 still keeps its original shape even after 7 forging cycles.

Analysis of Anterior Cervical Discectomy and Fusion Healthcare Costs via the Value-Driven Outcomes Tool.

PubMed

Reese, Jared C; Karsy, Michael; Twitchell, Spencer; Bisson, Erica F

2018-04-11

Examining the costs of single- and multilevel anterior cervical discectomy and fusion (ACDF) is important for the identification of cost drivers and potentially reducing patient costs. A novel tool at our institution provides direct costs for the identification of potential drivers. To assess perioperative healthcare costs for patients undergoing an ACDF. Patients who underwent an elective ACDF between July 2011 and January 2017 were identified retrospectively. Factors adding to total cost were placed into subcategories to identify the most significant contributors, and potential drivers of total cost were evaluated using a multivariable linear regression model. A total of 465 patients (mean, age 53 ± 12 yr, 54% male) met the inclusion criteria for this study. The distribution of total cost was broken down into supplies/implants (39%), facility utilization (37%), physician fees (14%), pharmacy (7%), imaging (2%), and laboratory studies (1%). A multivariable linear regression analysis showed that total cost was significantly affected by the number of levels operated on, operating room time, and length of stay. Costs also showed a narrow distribution with few outliers and did not vary significantly over time. These results suggest that facility utilization and supplies/implants are the predominant cost contributors, accounting for 76% of the total cost of ACDF procedures. Efforts at lowering costs within these categories should make the most impact on providing more cost-effective care.

A Methodology for Developing Army Acquisition Strategies for an Uncertain Future

DTIC Science & Technology

2007-01-01

manuscript for publication. Acronyms ABP Assumption-Based Planning ACEIT Automated Cost Estimating Integrated Tool ACR Armored Cavalry Regiment ACTD...decisions. For example, they employ the Automated Cost Estimating Integrated Tools ( ACEIT ) to simplify life cycle cost estimates; other tools are

ResStock Analysis Tool | Buildings | NREL

Science.gov Websites

Energy and Cost Savings for U.S. Homes Contact Eric Wilson to learn how ResStock can benefit your approach to large-scale residential energy analysis by combining: Large public and private data sources uncovered $49 billion in potential annual utility bill savings through cost-effective energy efficiency

EASY AT-Food for Thought: The Minibook

ERIC Educational Resources Information Center

Schoonover, Judith

2015-01-01

Not all technology requires plugs, batteries, or software updates. Sometimes the simplest tools can make all the difference in the world, and open doors (and minds) to other possibilities. One such tool is a minibook constructed by a single sheet of cleverly folded paper. A minibook is a cost-effective, easy to revise and replace,…

Rapid E-Learning Simulation Training and User Response

ERIC Educational Resources Information Center

Rackler, Angeline

2011-01-01

A new trend in e-learning development is to have subject matter experts use rapid development tools to create training simulations. This type of training is called rapid e-learning simulation training. Though companies are using rapid development tools to create training quickly and cost effectively, there is little empirical research to indicate…

Advanced Tools for Smartphone-Based Experiments: Phyphox

ERIC Educational Resources Information Center

Staacks, S.; Hütz, S.; Stampfer, C.; Heinke, H.

2018-01-01

The sensors in modern smartphones are a promising and cost-effective tool for experimentation in physics education, but many experiments face practical problems. Often the phone is inaccessible during the experiment and the data usually needs to be analyzed subsequently on a computer. We address both problems by introducing a new app, called…

Optimal distribution of borehole geophones for monitoring CO2-injection-induced seismicity

NASA Astrophysics Data System (ADS)

Huang, L.; Chen, T.; Foxall, W.; Wagoner, J. L.

2016-12-01

The U.S. DOE initiative, National Risk Assessment Partnership (NRAP), aims to develop quantitative risk assessment methodologies for carbon capture, utilization and storage (CCUS). As part of tasks of the Strategic Monitoring Group of NRAP, we develop a tool for optimal design of a borehole geophones distribution for monitoring CO2-injection-induced seismicity. The tool consists of a number of steps, including building a geophysical model for a given CO2 injection site, defining target monitoring regions within CO2-injection/migration zones, generating synthetic seismic data, giving acceptable uncertainties in input data, and determining the optimal distribution of borehole geophones. We use a synthetic geophysical model as an example to demonstrate the capability our new tool to design an optimal/cost-effective passive seismic monitoring network using borehole geophones. The model is built based on the geologic features found at the Kimberlina CCUS pilot site located in southern San Joaquin Valley, California. This tool can provide CCUS operators with a guideline for cost-effective microseismic monitoring of geologic carbon storage and utilization.

WMOST

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) allows water-resource managers and planners to screen a wide range of practices for cost-effectiveness in achieving watershed or water utilities management goals.

[Cost-effectiveness analysis and diet quality index applied to the WHO Global Strategy].

PubMed

Machado, Flávia Mori Sarti; Simões, Arlete Naresse

2008-02-01

To test the use of cost-effectiveness analysis as a decision making tool in the production of meals for the inclusion of the recommendations published in the World Health Organization's Global Strategy. Five alternative options for breakfast menu were assessed previously to their adoption in a food service at a university in the state of Sao Paulo, Southeastern Brazil, in 2006. Costs of the different options were based on market prices of food items (direct cost). Health benefits were estimated based on adaptation of the Diet Quality Index (DQI). Cost-effectiveness ratios were estimated by dividing benefits by costs and incremental cost-effectiveness ratios were estimated as cost differential per unit of additional benefit. The meal choice was based on health benefit units associated to direct production cost as well as incremental effectiveness per unit of differential cost. The analysis showed the most simple option with the addition of a fruit (DQI = 64 / cost = R$ 1.58) as the best alternative. Higher effectiveness was seen in the options with a fruit portion (DQI1=64 / DQI3=58 / DQI5=72) compared to the others (DQI2=48 / DQI4=58). The estimate of cost-effectiveness ratio allowed to identifying the best breakfast option based on cost-effectiveness analysis and Diet Quality Index. These instruments allow easy application easiness and objective evaluation which are key to the process of inclusion of public or private institutions under the Global Strategy directives.

Getting it right when budgets are tight: Using optimal expansion pathways to prioritize responses to concentrated and mixed HIV epidemics.

PubMed

Stuart, Robyn M; Kerr, Cliff C; Haghparast-Bidgoli, Hassan; Estill, Janne; Grobicki, Laura; Baranczuk, Zofia; Prieto, Lorena; Montañez, Vilma; Reporter, Iyanoosh; Gray, Richard T; Skordis-Worrall, Jolene; Keiser, Olivia; Cheikh, Nejma; Boonto, Krittayawan; Osornprasop, Sutayut; Lavadenz, Fernando; Benedikt, Clemens J; Martin-Hughes, Rowan; Hussain, S Azfar; Kelly, Sherrie L; Kedziora, David J; Wilson, David P

2017-01-01

Prioritizing investments across health interventions is complicated by the nonlinear relationship between intervention coverage and epidemiological outcomes. It can be difficult for countries to know which interventions to prioritize for greatest epidemiological impact, particularly when budgets are uncertain. We examined four case studies of HIV epidemics in diverse settings, each with different characteristics. These case studies were based on public data available for Belarus, Peru, Togo, and Myanmar. The Optima HIV model and software package was used to estimate the optimal distribution of resources across interventions associated with a range of budget envelopes. We constructed "investment staircases", a useful tool for understanding investment priorities. These were used to estimate the best attainable cost-effectiveness of the response at each investment level. We find that when budgets are very limited, the optimal HIV response consists of a smaller number of 'core' interventions. As budgets increase, those core interventions should first be scaled up, and then new interventions introduced. We estimate that the cost-effectiveness of HIV programming decreases as investment levels increase, but that the overall cost-effectiveness remains below GDP per capita. It is important for HIV programming to respond effectively to the overall level of funding availability. The analytic tools presented here can help to guide program planners understand the most cost-effective HIV responses and plan for an uncertain future.

Elements of Designing for Cost

NASA Technical Reports Server (NTRS)

Dean, Edwin B.; Unal, Resit

1992-01-01

During recent history in the United States, government systems development has been performance driven. As a result, systems within a class have experienced exponentially increasing cost over time in fixed year dollars. Moreover, little emphasis has been placed on reducing cost. This paper defines designing for cost and presents several tools which, if used in the engineering process, offer the promise of reducing cost. Although other potential tools exist for designing for cost, this paper focuses on rules of thumb, quality function deployment, Taguchi methods, concurrent engineering, and activity based costing. Each of these tools has been demonstrated to reduce cost if used within the engineering process.

Elements of designing for cost

NASA Technical Reports Server (NTRS)

Dean, Edwin B.; Unal, Resit

1992-01-01

During recent history in the United States, government systems development has been performance driven. As a result, systems within a class have experienced exponentially increasing cost over time in fixed year dollars. Moreover, little emphasis has been placed on reducing cost. This paper defines designing for cost and presents several tools which, if used in the engineering process, offer the promise of reducing cost. Although other potential tools exist for designing for cost, this paper focuses on rules of thumb, quality function deployment, Taguchi methods, concurrent engineering, and activity-based costing. Each of these tools has been demonstrated to reduce cost if used within the engineering process.

Cost-Loss Analysis of Ensemble Solar Wind Forecasting: Space Weather Use of Terrestrial Weather Tools

NASA Astrophysics Data System (ADS)

Henley, E. M.; Pope, E. C. D.

2017-12-01

This commentary concerns recent work on solar wind forecasting by Owens and Riley (2017). The approach taken makes effective use of tools commonly used in terrestrial weather—notably, via use of a simple model—generation of an "ensemble" forecast, and application of a "cost-loss" analysis to the resulting probabilistic information, to explore the benefit of this forecast to users with different risk appetites. This commentary aims to highlight these useful techniques to the wider space weather audience and to briefly discuss the general context of application of terrestrial weather approaches to space weather.

Airport GSE Model Directions

EPA Pesticide Factsheets

User manual for the GSEModel which is a spreadsheet analysis tool for quantifying emission benefits and calculating the cost-effectiveness of converting to cleaner-burning fuels and engine technologies.

Present-value analysis: A systems approach to public decisionmaking for cost effectiveness

NASA Technical Reports Server (NTRS)

Herbert, T. T.

1971-01-01

Decision makers within Governmental agencies and Congress must evaluate competing (and sometimes conflicting) proposals which seek funding and implementation. Present value analysis can be an effective decision making tool by enabling the formal evaluation of the effects of competing proposals on efficient national resource utilization. A project's costs are not only its direct disbursements, but its social costs as well. How much does it cost to have those funds diverted from their use and economic benefit by the private sector to the public project? Comparisons of competing projects' social costs allow decision makers to expand their decision bases by quantifying the projects' impacts upon the economy and the efficient utilization of the country's limited national resources. A conceptual model is established for the choosing of the appropriate discount rate to be used in evaluation decisions through the technique.

Investing in International Information Exchange Activities to Improve the Safety, Cost Effectiveness and Schedule of Cleanup - 13281

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seed, Ian; James, Paula; Mathieson, John

2013-07-01

With decreasing budgets and increasing pressure on completing cleanup missions as quickly, safely and cost-effectively as possible, there is significant benefit to be gained from collaboration and joint efforts between organizations facing similar issues. With this in mind, the US Department of Energy (DOE) and the UK Nuclear Decommissioning Authority (NDA) have formally agreed to share information on lessons learned on the development and application of new technologies and approaches to improve the safety, cost effectiveness and schedule of the cleanup legacy wastes. To facilitate information exchange a range of tools and methodologies were established. These included tacit knowledge exchangemore » through facilitated meetings, conference calls and Site visits as well as explicit knowledge exchange through document sharing and newsletters. A DOE web-based portal has been established to capture these exchanges and add to them via discussion boards. The information exchange is operating at the Government-to-Government strategic level as well as at the Site Contractor level to address both technical and managerial topic areas. This effort has resulted in opening a dialogue and building working relationships. In some areas joint programs of work have been initiated thus saving resource and enabling the parties to leverage off one another activities. The potential benefits of high quality information exchange are significant, ranging from cost avoidance through identification of an approach to a problem that has been proven elsewhere to cost sharing and joint development of a new technology to address a common problem. The benefits in outcomes significantly outweigh the costs of the process. The applicability of the tools and methods along with the lessons learned regarding some key issues is of use to any organization that wants to improve value for money. In the waste management marketplace, there are a multitude of challenges being addressed by multiple organizations and the effective pooling and exchange of knowledge and experience can only be of benefit to all participants to help complete the cleanup mission more quickly and more cost effectively. This paper examines in detail the tools and processes used to promote information exchange and the progress made to date. It also discusses the challenges and issues involved and proposes recommendations to others who are involved in similar activities. (authors)« less

The Locus of Tool-Transformation Costs

ERIC Educational Resources Information Center

Kunde, Wilfried; Pfister, Roland; Janczyk, Markus

2012-01-01

Transformations of hand movements by tools such as levers or electronic input devices can invoke performance costs compared to untransformed movements. This study investigated by means of the Psychological Refractory Period (PRP) paradigm at which stage of information processing such tool-transformation costs arise. We used an inversion…

Laser Cladding of CPM Tool Steels on Hardened H13 Hot-Work Steel for Low-Cost High-Performance Automotive Tooling

NASA Astrophysics Data System (ADS)

Chen, J.; Xue, L.

2012-06-01

This paper summarizes our research on laser cladding of high-vanadium CPM® tool steels (3V, 9V, and 15V) onto the surfaces of low-cost hardened H13 hot-work tool steel to substantially enhance resistance against abrasive wear. The results provide great potential for fabricating high-performance automotive tooling (including molds and dies) at affordable cost. The microstructure and hardness development of the laser-clad tool steels so obtained are presented as well.

Decision Support for the Capacity Management of Bronchoscopy Devices: Optimizing the Cost-Efficient Mix of Reusable and Single-Use Devices Through Mathematical Modeling.

PubMed

Edenharter, Günther M; Gartner, Daniel; Pförringer, Dominik

2017-06-01

Increasing costs of material resources challenge hospitals to stay profitable. Particularly in anesthesia departments and intensive care units, bronchoscopes are used for various indications. Inefficient management of single- and multiple-use systems can influence the hospitals' material costs substantially. Using mathematical modeling, we developed a strategic decision support tool to determine the optimum mix of disposable and reusable bronchoscopy devices in the setting of an intensive care unit. A mathematical model with the objective to minimize costs in relation to demand constraints for bronchoscopy devices was formulated. The stochastic model decides whether single-use, multi-use, or a strategically chosen mix of both device types should be used. A decision support tool was developed in which parameters for uncertain demand such as mean, standard deviation, and a reliability parameter can be inserted. Furthermore, reprocessing costs per procedure, procurement, and maintenance costs for devices can be parameterized. Our experiments show for which demand pattern and reliability measure, it is efficient to only use reusable or disposable devices and under which circumstances the combination of both device types is beneficial. To determine the optimum mix of single-use and reusable bronchoscopy devices effectively and efficiently, managers can enter their hospital-specific parameters such as demand and prices into the decision support tool.The software can be downloaded at: https://github.com/drdanielgartner/bronchomix/.

Contingency Contractor Optimization Phase 3 Sustainment Software Design Document - Contingency Contractor Optimization Tool - Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durfee, Justin David; Frazier, Christopher Rawls; Bandlow, Alisa

This document describes the final software design of the Contingency Contractor Optimization Tool - Prototype. Its purpose is to provide the overall architecture of the software and the logic behind this architecture. Documentation for the individual classes is provided in the application Javadoc. The Contingency Contractor Optimization project is intended to address Department of Defense mandates by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. The Contingency Contractor Optimization Tool - Prototype was developed in Phase 3 of the OSD ATLmore » Contingency Contractor Optimization project to support strategic planning for contingency contractors. The planning tool uses a model to optimize the Total Force mix by minimizing the combined total costs for selected mission scenarios. The model optimizes the match of personnel types (military, DoD civilian, and contractors) and capabilities to meet mission requirements as effectively as possible, based on risk, cost, and other requirements.« less

A Common Programming Language for the Department of Defense--Background and Technical Requirements

DTIC Science & Technology

1976-06-01

Method Findings I. Introduction A. The Problem 1. Software Costs 2. Programming Language 3. Lack of Comrr.onality 4. Common Language 5...accessible soft- ware tools and aids. There are a number of widely held perceptions about the ill effects of the lack of programming language ...cost- effective (at lea~t during development) than de- velopi~g a new programming language specialized to the project. On the other hand,

Using Habitat Equivalency Analysis to Assess the Cost Effectiveness of Restoration Outcomes in Four Institutional Contexts

NASA Astrophysics Data System (ADS)

Scemama, Pierre; Levrel, Harold

2016-01-01

At the national level, with a fixed amount of resources available for public investment in the restoration of biodiversity, it is difficult to prioritize alternative restoration projects. One way to do this is to assess the level of ecosystem services delivered by these projects and to compare them with their costs. The challenge is to derive a common unit of measurement for ecosystem services in order to compare projects which are carried out in different institutional contexts having different goals (application of environmental laws, management of natural reserves, etc.). This paper assesses the use of habitat equivalency analysis (HEA) as a tool to evaluate ecosystem services provided by restoration projects developed in different institutional contexts. This tool was initially developed to quantify the level of ecosystem services required to compensate for non-market impacts coming from accidental pollution in the US. In this paper, HEA is used to assess the cost effectiveness of several restoration projects in relation to different environmental policies, using case studies based in France. Four case studies were used: the creation of a market for wetlands, public acceptance of a port development project, the rehabilitation of marshes to mitigate nitrate loading to the sea, and the restoration of streams in a protected area. Our main conclusion is that HEA can provide a simple tool to clarify the objectives of restoration projects, to compare the cost and effectiveness of these projects, and to carry out trade-offs, without requiring significant amounts of human or technical resources.

Using Habitat Equivalency Analysis to Assess the Cost Effectiveness of Restoration Outcomes in Four Institutional Contexts.

PubMed

Scemama, Pierre; Levrel, Harold

2016-01-01

At the national level, with a fixed amount of resources available for public investment in the restoration of biodiversity, it is difficult to prioritize alternative restoration projects. One way to do this is to assess the level of ecosystem services delivered by these projects and to compare them with their costs. The challenge is to derive a common unit of measurement for ecosystem services in order to compare projects which are carried out in different institutional contexts having different goals (application of environmental laws, management of natural reserves, etc.). This paper assesses the use of habitat equivalency analysis (HEA) as a tool to evaluate ecosystem services provided by restoration projects developed in different institutional contexts. This tool was initially developed to quantify the level of ecosystem services required to compensate for non-market impacts coming from accidental pollution in the US. In this paper, HEA is used to assess the cost effectiveness of several restoration projects in relation to different environmental policies, using case studies based in France. Four case studies were used: the creation of a market for wetlands, public acceptance of a port development project, the rehabilitation of marshes to mitigate nitrate loading to the sea, and the restoration of streams in a protected area. Our main conclusion is that HEA can provide a simple tool to clarify the objectives of restoration projects, to compare the cost and effectiveness of these projects, and to carry out trade-offs, without requiring significant amounts of human or technical resources.

Assessing the quality of cost management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fayne, V.; McAllister, A.; Weiner, S.B.

1995-12-31

Managing environmental programs can be effective only when good cost and cost-related management practices are developed and implemented. The Department of Energy`s Office of Environmental Management (EM), recognizing this key role of cost management, initiated several cost and cost-related management activities including the Cost Quality Management (CQM) Program. The CQM Program includes an assessment activity, Cost Quality Management Assessments (CQMAs), and a technical assistance effort to improve program/project cost effectiveness. CQMAs provide a tool for establishing a baseline of cost-management practices and for measuring improvement in those practices. The result of the CQMA program is an organization that has anmore » increasing cost-consciousness, improved cost-management skills and abilities, and a commitment to respond to the public`s concerns for both a safe environment and prudent budget outlays. The CQMA program is part of the foundation of quality management practices in DOE. The CQMA process has contributed to better cost and cost-related management practices by providing measurements and feedback; defining the components of a quality cost-management system; and helping sites develop/improve specific cost-management techniques and methods.« less

A web tool for STORET/WQX water quality data retrieval and Best Management Practice scenario suggestion.

PubMed

Park, Youn Shik; Engel, Bernie A; Kim, Jonggun; Theller, Larry; Chaubey, Indrajeet; Merwade, Venkatesh; Lim, Kyoung Jae

2015-03-01

Total Maximum Daily Load is a water quality standard to regulate water quality of streams, rivers and lakes. A wide range of approaches are used currently to develop TMDLs for impaired streams and rivers. Flow and load duration curves (FDC and LDC) have been used in many states to evaluate the relationship between flow and pollutant loading along with other models and approaches. A web-based LDC Tool was developed to facilitate development of FDC and LDC as well as to support other hydrologic analyses. In this study, the FDC and LDC tool was enhanced to allow collection of water quality data via the web and to assist in establishing cost-effective Best Management Practice (BMP) implementations. The enhanced web-based tool provides use of water quality data not only from the US Geological Survey but also from the Water Quality Portal for the U.S. via web access. Moreover, the web-based tool identifies required pollutant reductions to meet standard loads and suggests a BMP scenario based on ability of BMPs to reduce pollutant loads, BMP establishment and maintenance costs. In the study, flow and water quality data were collected via web access to develop LDC and to identify the required reduction. The suggested BMP scenario from the web-based tool was evaluated using the EPA Spreadsheet Tool for the Estimation of Pollutant Load model to attain the required pollutant reduction at least cost. Copyright © 2014 Elsevier Ltd. All rights reserved.

User's manual for The TIM benefit-cost (TIM-BC) Tool (Version: 1.0.0)

DOT National Transportation Integrated Search

2015-07-04

This document serves as a users manual for the Traffic Incident Management Benefit-Cost Tool (TIM-BC) Version 1.0.0 - Safety Service Patrol Benefit-Cost (SSP-BC) Tool, which is used to assist State and local engineers and decisionmakers with evalu...

Appendix W. Cost Analysis in Teacher Education Programs.

ERIC Educational Resources Information Center

Sell, G. Roger; And Others

This paper is an introduction to the basic cost-related tools available to management for planning, evaluating, and organizing resources for the purpose of achieving objectives within a teacher education preparation program. Three tools are presented in separate sections. Part I on the cost accounting tool for identifying, categorizing, and…

Costs and benefits of tool-use on the perception of reachable space.

PubMed

Bourgeois, Jérémy; Farnè, Alessandro; Coello, Yann

2014-05-01

Previous studies have shown that using a tool modifies in a short time-scale both near-body space perception and arm-length representation in the body schema. However, to date no research has specifically investigated the effect of tool-use on an action-related perceptual task. We report here a study assessing the effect of tool-use on the perception of reachable space for perceptual estimates made in reference to either the tool or the hand. Using the tool on distal objects resulted in an extension of perceived reachable space with the tool and reduced the variability of reachability estimates. Tool use also extended perceived reachable space with the hand, but with a concomitant increase of the variability of reachability estimates. These findings suggest that tool incorporation into the represented arm following tool-use improves the anticipation of action possibilities with the tool, while hand representation becomes less accurate. Copyright © 2014 Elsevier B.V. All rights reserved.

Methods and tools to simulate the effect of economic instruments in complex water resources systems. Application to the Jucar river basin.

NASA Astrophysics Data System (ADS)

Lopez-Nicolas, Antonio; Pulido-Velazquez, Manuel

2014-05-01

The main challenge of the BLUEPRINT to safeguard Europe's water resources (EC, 2012) is to guarantee that enough good quality water is available for people's needs, the economy and the environment. In this sense, economic policy instruments such as water pricing policies and water markets can be applied to enhance efficient use of water. This paper presents a method based on hydro-economic tools to assess the effect of economic instruments on water resource systems. Hydro-economic models allow integrated analysis of water supply, demand and infrastructure operation at the river basin scale, by simultaneously combining engineering, hydrologic and economic aspects of water resources management. The method made use of the simulation and optimization hydroeconomic tools SIMGAMS and OPTIGAMS. The simulation tool SIMGAMS allocates water resources among the users according to priorities and operating rules, and evaluate economic scarcity costs of the system by using economic demand functions. The model's objective function is designed so that the system aims to meet the operational targets (ranked according to priorities) at each month while following the system operating rules. The optimization tool OPTIGAMS allocates water resources based on an economic efficiency criterion: maximize net benefits, or alternatively, minimizing the total water scarcity and operating cost of water use. SIMGAS allows to simulate incentive water pricing policies based on marginal resource opportunity costs (MROC; Pulido-Velazquez et al., 2013). Storage-dependent step pricing functions are derived from the time series of MROC values at a certain reservoir in the system. These water pricing policies are defined based on water availability in the system (scarcity pricing), so that when water storage is high, the MROC is low, while low storage (drought periods) will be associated to high MROC and therefore, high prices. We also illustrate the use of OPTIGAMS to simulate the effect of ideal water markets by economic optimization, without considering the potential effect of transaction costs. These methods and tools have been applied to the Jucar River basin (Spain). The results show the potential of economic instruments in setting incentives for a more efficient management of water resources systems. Acknowledgments: The study has been partially supported by the European Community 7th Framework Project (GENESIS project, n. 226536), SAWARES (Plan Nacional I+D+i 2008-2011, CGL2009-13238-C02-01 and C02-02), SCARCE (Consolider-Ingenio 2010 CSD2009-00065) of the Spanish Ministry of Economy and Competitiveness; and EC 7th Framework Project ENHANCE (n. 308438) Reference: Pulido-Velazquez, M., Alvarez-Mendiola, E., and Andreu, J., 2013. Design of Efficient Water Pricing Policies Integrating Basinwide Resource Opportunity Costs. J. Water Resour. Plann. Manage., 139(5): 583-592.

Tools for Successful Weight Management in Primary Care

PubMed Central

Turer, Christy Boling

2015-01-01

Obesity is one of the most pervasive and costly public-health problems. Clinicians need effective tools to address weight management in primary care, including evaluation and communication methods, guideline-based weight-management interventions, and safe and effective weight-loss medications and surgery. The objective of this Grand-Rounds presentation is to provide practicing clinicians with the latest information regarding effective ways to care for and communicate with patients about weight loss; evidence-based guidelines for selecting weight-management therapies; and safety, efficacy, and adverse effects of weight-loss medications and surgery. PMID:26218666

Investigating biochar as a tool for environmental remediation

EPA Science Inventory

Biochar is being proposed as a cost-effective, carbon negative soil amendment for environmental remediation. Research has demonstrated the efficacy of biochar to sorb heavy metals and agricultural chemicals from contaminated soils, thus effectively reducing the potential for met...

[Costs analysis system; its location within a program for food, nutrition and metabolic intervention].

PubMed

Fernández Hernández, Ileana Sonia; Santana Porbén, Sergio

2015-06-01

Every medical surgical action implies costs. Costs of medical provisions should be translated into tangible, and thus, measurable, benefits for the health status of the patient. Nutritional support therapies might increase the costs of medical provisions, but it is expected their implementation to result in lower morbidity and mortality rates as well as shortening of hospital stay, all of them leading to important savings. It is then required the assimilation of tools for costs analysis for a better management of nutritional support therapies. A proposal for the design of a hospital system (regarded anywhere in this text as SHACOST) for the analysis of the costs of interventions conducted in a patient in accordance with the guidelines included in the Metabolic, Nutrient and Food Intervention Program (referred everywhere for its Spanish acronym PRINUMA) is presented in this article. Hence, strategies are described to estimate the costs of a specified intervention. In addition, a primer on cost-effectiveness (ACE) and incremental cost-effectiveness (ACEI) analyses is shown relying on examples taken from the authors's experience in the provision of nutritional care to patients electively operated for a colorectal cancer. Finally, costs of surgical treatment of a mandibular tumor are described, followed by a discussion on how a better impact of the adopted surgical action could be achieved without considerable increases in total costs should a perioperatory nutritional support program be included. Implementation of SHACOST can provide the medical care teams with accounting tools required to assess the effectiveness of hospital nutritional support schemes, decide whether to acquire and introduce new technologies, and measure the impact of the performance of hospital forms for provision of nutritional care upon health management and perceived quality of life of the patient and their relatives. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Assessing emotional well-being of children in a Honduran orphanage: feasibility of two screening tools.

PubMed

Debiasi, Laura B; Reynolds, Annette; Buckner, Ellen B

2012-01-01

The World Health Organization (WHO) has determined mental health in children to be a priority area for evidence-based interventions. Effective and efficient screening methods are needed to assess emotional well-being of children from diverse cultures. This descriptive study examined two tools for feasibility, sensitivity, cultural appropriateness, and cost/time effectiveness. Emotional well-being was conceptualized using the Roy Adaptation Model as part of the self-concept adaptive mode. Emotional indicators were measured from Human Figure Drawings. Anxiety was measured using a modification of the Revised Children's Manifest Anxiety Survey (RCMAS). The sample included 11 girls who were 7 to 12 years of age and recruited from a girls' orphanage in Honduras. Results indicated the Human Figure Drawings identified more children possibly at risk than the RCMAS. Human Figure Drawings were found to be a time/cost-effective, sensitive, and culturally appropriate means for measuring emotional well-being in the setting. This study contributes to nursing knowledge by demonstrating feasibility of the screening tools for measuring emotional well-being of children in varied cultures.

Low-Cost National Media-Based Surveillance System for Public Health Events, Bangladesh.

PubMed

Ao, Trong T; Rahman, Mahmudur; Haque, Farhana; Chakraborty, Apurba; Hossain, M Jahangir; Haider, Sabbir; Alamgir, A S M; Sobel, Jeremy; Luby, Stephen P; Gurley, Emily S

2016-04-01

We assessed a media-based public health surveillance system in Bangladesh during 2010-2011. The system is a highly effective, low-cost, locally appropriate, and sustainable outbreak detection tool that could be used in other low-income, resource-poor settings to meet the capacity for surveillance outlined in the International Health Regulations 2005.

Solutions to Address Diabetes-Related Financial Burden and Cost-Related Nonadherence: Results from a Pilot Study

ERIC Educational Resources Information Center

Patel, Minal R.; Resnicow, Kenneth; Lang, Ian; Kraus, Kathleen; Heisler, Michele

2018-01-01

Background: Cost-related nonadherence (CRN) to recommended self-management behaviors among adults with chronic conditions such as diabetes is prevalent. Few behavioral interventions to mitigate CRN have been tested and evaluated. Aims: We developed a financial burden resource tool and examined its acceptability and the preliminary effects on…

The ABCs of Activity-Based Costing: A Cost Containment and Reallocation Tool.

ERIC Educational Resources Information Center

Turk, Frederick J.

1992-01-01

This article describes activity-based costing (ABC) and how this tool may help management understand the costs of major activities and identify possible alternatives. Also discussed are the traditional costing systems used by higher education and ways of applying ABC to higher education. (GLR)

The Practice Profile: An All Purpose Tool for Program Communication, Staff Development, Evaluation and Improvement.

ERIC Educational Resources Information Center

Loucks, Susan F.; Crandall, David P.

The practice profile is a standardized, systematic, cost-effective tool for summarizing the components and requirements of a program in a manner that permits comparison with other programs or selection of discrete components from various programs. It provides a component checklist, a precise list of implementation requirements, and a system for…

Allometric equations for urban ash trees (Fraxinus spp.) in Oakville, Southern Ontario, Canada

Treesearch

Paula J. Peper; Claudia P. Alzate; John W. McNeil; Jalil Hashemi

2014-01-01

Tree growth equations are an important and common tool used to effectively assess the yield and determine management practices in forest plantations. Increasingly, they are being developed for urban forests, providing tools to assist urban forest managers with species selection, placement, and estimation of management costs and ecosystem services. This study describes...

Cost-effectiveness analysis: adding value to assessment of animal health welfare and production.

PubMed

Babo Martins, S; Rushton, J

2014-12-01

Cost-effectiveness analysis (CEA) has been extensively used in economic assessments in fields related to animal health, namely in human health where it provides a decision-making framework for choices about the allocation of healthcare resources. Conversely, in animal health, cost-benefit analysis has been the preferred tool for economic analysis. In this paper, the use of CEA in related areas and the role of this technique in assessments of animal health, welfare and production are reviewed. Cost-effectiveness analysis can add further value to these assessments, particularly in programmes targeting animal welfare or animal diseases with an impact on human health, where outcomes are best valued in natural effects rather than in monetary units. Importantly, CEA can be performed during programme implementation stages to assess alternative courses of action in real time.

Minimising post-operative risk using a Post-Anaesthetic Care Tool (PACT): protocol for a prospective observational study and cost-effectiveness analysis.

PubMed

Street, Maryann; Phillips, Nicole M; Kent, Bridie; Colgan, Stephen; Mohebbi, Mohammadreza

2015-06-01

While the risk of adverse events following surgery has been identified, the impact of nursing care on early detection of these events is not well established. A systematic review of the evidence and an expert consensus study in post-anaesthetic care identified essential criteria for nursing assessment of patient readiness for discharge from the post-anaesthetic care unit (PACU). These criteria were included in a new nursing assessment tool, the Post-Anaesthetic Care Tool (PACT), and incorporated into the post-anaesthetic documentation at a large health service. The aim of this study is to test the clinical reliability of the PACT and evaluate whether the use of PACT will (1) enhance the recognition and response to patients at risk of deterioration in PACU; (2) improve documentation for handover from PACU nurse to ward nurse; (3) result in improved patient outcomes and (4) reduce healthcare costs. A prospective, non-randomised, pre-implementation and post-implementation design comparing: (1) patients (n=750) who have surgery prior to the implementation of the PACT and (2) patients (n=750) who have surgery after PACT. The study will examine the use of the tool through the observation of patient care and nursing handover. Patient outcomes and cost-effectiveness will be determined from health service data and medical record audit. Descriptive statistics will be used to describe the sample and compare the two patient groups (pre-intervention and post-intervention). Differences in patient outcomes between the two groups will be compared using the Cochran-Mantel-Haenszel test and regression analyses and reported as ORs with the corresponding 95% CIs. This study will test the clinical reliability and cost-effectiveness of the PACT. It is hypothesised that the PACT will enable nurses to recognise and respond to patients at risk of deterioration, improve handover to ward nurses, improve patient outcomes, and reduce healthcare costs. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Inspection planning development: An evolutionary approach using reliability engineering as a tool

NASA Technical Reports Server (NTRS)

Graf, David A.; Huang, Zhaofeng

1994-01-01

This paper proposes an evolutionary approach for inspection planning which introduces various reliability engineering tools into the process and assess system trade-offs among reliability, engineering requirement, manufacturing capability and inspection cost to establish an optimal inspection plan. The examples presented in the paper illustrate some advantages and benefits of the new approach. Through the analysis, reliability and engineering impacts due to manufacturing process capability and inspection uncertainty are clearly understood; the most cost effective and efficient inspection plan can be established and associated risks are well controlled; some inspection reductions and relaxations are well justified; and design feedbacks and changes may be initiated from the analysis conclusion to further enhance reliability and reduce cost. The approach is particularly promising as global competitions and customer quality improvement expectations are rapidly increasing.

Duplicate laboratory test reduction using a clinical decision support tool.

PubMed

Procop, Gary W; Yerian, Lisa M; Wyllie, Robert; Harrison, A Marc; Kottke-Marchant, Kandice

2014-05-01

Duplicate laboratory tests that are unwarranted increase unnecessary phlebotomy, which contributes to iatrogenic anemia, decreased patient satisfaction, and increased health care costs. We employed a clinical decision support tool (CDST) to block unnecessary duplicate test orders during the computerized physician order entry (CPOE) process. We assessed laboratory cost savings after 2 years and searched for untoward patient events associated with this intervention. This CDST blocked 11,790 unnecessary duplicate test orders in these 2 years, which resulted in a cost savings of $183,586. There were no untoward effects reported associated with this intervention. The movement to CPOE affords real-time interaction between the laboratory and the physician through CDSTs that signal duplicate orders. These interactions save health care dollars and should also increase patient satisfaction and well-being.

Can CER be an effective tool for change in the development and assessment of new drugs and technologies?

PubMed

Brixner, Diana I; Watkins, John B

2012-06-01

Comparative effectiveness research (CER) has been proposed in the United States as a way to compare new drugs and technologies with established alternatives and determine not just whether a therapy works, but how well it works compared to other options. To define the current use of CER in the development of new drugs and technologies and explore what is needed for this research approach to reduce or stabilize health care costs in the United States. In 2010, the Patient-Centered Outcomes Research Institute (PCORI) was established by the Patient Protection and Affordable Care Act (PPACA) to coordinate federally funded CER and recommend research priorities. Hochman and McCormick's (2010) evaluation of 328 randomized trials, observational studies, and meta-analyses involving medications published between June 2008 and September 2009 in 6 key journals showed that most published research did not fulfill the criteria of CER (defined as comparison to active treatment) and that most study design is driven by FDA requirements rather than the need to develop evidence to facilitates election of the most effective therapy. Since PPACA provides alternative funding for CER, it could encourage funding more studies to help determine which treatment delivers the best value per unit of investment from clinical, humanistic, and economic perspectives. Manufacturers may avoid CER because it increases product development costs, but a drug proven more effective is more likely to be accepted by formulary committees, increasing the drug's market share, whereas payers may reject or limit use of a new drug that performs less effectively in comparative studies. CER may not directly reduce expenditures for drugs and medical technologies. The results may vary widely from case to case; however, despite often significantly higher prices for new drugs, it is important to look beyond product costs to the overall impact on health care costs, including medical cost offsets that may occur through improved health or decreased morbidity. To truly decrease cost and improve quality, cost-effectiveness will have to be integrated into CER with the objective of prioritizing efficient therapies in the real-world health care system. If the methods and output of CER improve, the resulting cost-effectiveness ratios will also be more useful to the payer. CER should ultimately, therefore, be a useful tool to help patients, providers, and decision makers provide the most effective and most cost-effective interventions.

Managing Watersheds with WMOST

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) allows water-resource managers and planners to screen a wide range of practices for cost-effectiveness in achieving watershed or water utilities management goals.

Developing a cost accounting system for a physician group practice.

PubMed

Mays, J; Gordon, G

1996-10-01

Physicians in group practices must gain a competitive edge to survive in a healthcare environment in which cost efficiency has become critical to success. One tool that can help them is a cost accounting system that yields reliable, detailed data on the costs of delivering care. Such a system not only can enable physicians and group administrators to manage their operations more cost-effectively, but also can help them accurately assess the potential profitability of prospective managed care plans. An otolaryngology practice located in Mississippi provides a model for developing a cost accounting system that can be applied to physician group practices.

[Cost-effectiveness of Synchronous vs. Asynchronous Telepsychiatry in Prison Inmates With Depression].

PubMed

Barrera-Valencia, Camilo; Benito-Devia, Alexis Vladimir; Vélez-Álvarez, Consuelo; Figueroa-Barrera, Mario; Franco-Idárraga, Sandra Milena

Telepsychiatry is defined as the use of information and communication technology (ICT) in providing remote psychiatric services. Telepsychiatry is applied using two types of communication: synchronous (real time) and asynchronous (store and forward). To determine the cost-effectiveness of a synchronous and an asynchronous telepsychiatric model in prison inmate patients with symptoms of depression. A cost-effectiveness study was performed on a population consisting of 157 patients from the Establecimiento Penitenciario y Carcelario de Mediana Seguridad de Manizales, Colombia. The sample was determined by applying Zung self-administered surveys for depression (1965) and the Hamilton Depression Rating Scale (HDRS), the latter being the tool used for the comparison. Initial Hamilton score, arrival time, duration of system downtime, and clinical effectiveness variables had normal distributions (P>.05). There were significant differences (P<.001) between care costs for the different models, showing that the mean cost of the asynchronous model is less than synchronous model, and making the asynchronous model more cost-effective. The asynchronous model is the most cost-effective model of telepsychiatry care for patients with depression admitted to a detention centre, according to the results of clinical effectiveness, cost measurement, and patient satisfaction. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Cost-effectiveness Analysis with Influence Diagrams.

PubMed

Arias, M; Díez, F J

2015-01-01

Cost-effectiveness analysis (CEA) is used increasingly in medicine to determine whether the health benefit of an intervention is worth the economic cost. Decision trees, the standard decision modeling technique for non-temporal domains, can only perform CEA for very small problems. To develop a method for CEA in problems involving several dozen variables. We explain how to build influence diagrams (IDs) that explicitly represent cost and effectiveness. We propose an algorithm for evaluating cost-effectiveness IDs directly, i.e., without expanding an equivalent decision tree. The evaluation of an ID returns a set of intervals for the willingness to pay - separated by cost-effectiveness thresholds - and, for each interval, the cost, the effectiveness, and the optimal intervention. The algorithm that evaluates the ID directly is in general much more efficient than the brute-force method, which is in turn more efficient than the expansion of an equivalent decision tree. Using OpenMarkov, an open-source software tool that implements this algorithm, we have been able to perform CEAs on several IDs whose equivalent decision trees contain millions of branches. IDs can perform CEA on large problems that cannot be analyzed with decision trees.

Costing the Morbidity and Mortality Consequences of Zoonoses Using Health-Adjusted Life Years.

PubMed

Jordan, H; Dunt, D; Hollingsworth, B; Firestone, S M; Burgman, M

2016-10-01

Governments are routinely involved in the biosecurity of agricultural and food imports and exports. This involves controlling the complex ongoing threat of the broad range of zoonoses: endemic, exotic and newly emerging. Policy-related decision-making in these areas requires accurate information and predictions concerning the effects and potential impacts of zoonotic diseases. The aim of this article was to provide information concerning the development and use of utility-based tools, specifically disability-adjusted life years (DALYs), for measuring the burden on human disease (morbidity and mortality) as a consequence of zoonotic infections. Issues and challenges to their use are also considered. Non-monetary utility approaches that are reviewed in this paper form one of a number of tools that can be used to estimate the monetary and non-monetary 'cost' of morbidity- and mortality-related consequences. Other tools derive from cost-of-illness, willingness-to-pay and multicriteria approaches. Utility-based approaches are specifically designed to capture the pain, suffering and loss of functioning associated with diseases, zoonotic and otherwise. These effects are typically complicated to define, measure and subsequently 'cost'. Utility-based measures will not be able to capture all of the effects, especially those that extend beyond the health sector. These will more normally be captured in financial terms. Along with other uncommon diseases, the quality of the relevant epidemiological data may not be adequate to support the estimation of losses in utility as a result of zoonoses. Other issues in their use have been identified. New empirical studies have shown some success in addressing these issues. Other issues await further study. It is concluded that, bearing in mind all caveats, utility-based methods are important tools in assessing the magnitude of the impacts of zoonoses in human disease. They make an important contribution to decision-making and priority setting across all sectors. In doing so, they highlight the relative importance of the burden of zoonotic disease globally. © 2014 Blackwell Verlag GmbH.

Can incentives make a difference? Assessing the effects of policy tools for encouraging tree-planting on private lands.

PubMed

Ruseva, Tatyana B; Evans, Tom P; Fischer, Burnell C

2015-05-15

This study uses a mail survey of private landowners in the Midwest United States to understand the characteristics of owners who have planted trees or intend to plant trees in the future. The analysis examines what policy tools encourage owners to plant trees, and how policy tools operate across different ownership attributes to promote tree-planting on private lands. Logistic regression results suggest that cost-subsidizing policy tools, such as low-cost and free seedlings, significantly increase the odds of actual and planned reforestation when landowners consider them important for increasing forest cover. Individuals most likely to plant trees, when low-cost seedlings are available and important, are fairly recent (<5 years), college-educated owners who own small parcels (<4 ha) and use the land for recreation. Motivations to reforest were also shaped by owners' planning horizons, connection to the land, previous tree-planting experience, and peer influence. The study has relevance for the design of policy approaches that can encourage private forestation through provision of economic incentives and capacity to private landowners. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimal implementation of best management practices to improve agricultural hydrology and water quality

NASA Astrophysics Data System (ADS)

Liu, Y.; Engel, B.; Collingsworth, P.; Pijanowski, B. C.

2017-12-01

Nutrient loading from the Maumee River watershed is a significant reason for the harmful algal blooms (HABs) problem in Lake Erie. Strategies to reduce nutrient loading from agricultural areas in the Maumee River watershed need to be explored. Best management practices (BMPs) are popular approaches for improving hydrology and water quality. Various scenarios of BMP implementation were simulated in the AXL watershed (an agricultural watershed in Maumee River watershed) using Soil and Water Assessment Tool (SWAT) and a new BMP cost tool to explore the cost-effectiveness of the practices. BMPs of interest included vegetative filter strips, grassed waterways, blind inlets, grade stabilization structures, wetlands, no-till, nutrient management, residue management, and cover crops. The following environmental concerns were considered: streamflow, Total Phosphorous (TP), Dissolved Reactive Phosphorus (DRP), Total Kjeldahl Nitrogen (TKN), and Nitrate+Nitrite (NOx). To obtain maximum hydrological and water quality benefits with minimum cost, an optimization tool was developed to optimally select and place BMPs by connecting SWAT, the BMP cost tool, and optimization algorithms. The optimization tool was then applied in AXL watershed to explore optimization focusing on critical areas (top 25% of areas with highest runoff volume/pollutant loads per area) vs. all areas of the watershed, optimization using weather data for spring (March to July, due to the goal of reducing spring phosphorus in watershed management plan) vs. full year, and optimization results of implementing BMPs to achieve the watershed management plan goal (reducing 2008 TP levels by 40%). The optimization tool and BMP optimization results can be used by watershed groups and communities to solve hydrology and water quality problems.

Use of Virtual Reality Tools for Vestibular Disorders Rehabilitation: A Comprehensive Analysis.

PubMed

Bergeron, Mathieu; Lortie, Catherine L; Guitton, Matthieu J

2015-01-01

Classical peripheral vestibular disorders rehabilitation is a long and costly process. While virtual reality settings have been repeatedly suggested to represent possible tools to help the rehabilitation process, no systematic study had been conducted so far. We systematically reviewed the current literature to analyze the published protocols documenting the use of virtual reality settings for peripheral vestibular disorders rehabilitation. There is an important diversity of settings and protocols involving virtual reality settings for the treatment of this pathology. Evaluation of the symptoms is often not standardized. However, our results unveil a clear effect of virtual reality settings-based rehabilitation of the patients' symptoms, assessed by objectives tools such as the DHI (mean decrease of 27 points), changing symptoms handicap perception from moderate to mild impact on life. Furthermore, we detected a relationship between the duration of the exposure to virtual reality environments and the magnitude of the therapeutic effects, suggesting that virtual reality treatments should last at least 150 minutes of cumulated exposure to ensure positive outcomes. Virtual reality offers a pleasant and safe environment for the patient. Future studies should standardize evaluation tools, document putative side effects further, compare virtual reality to conventional physical therapy, and evaluate economical costs/benefits of such strategies.

Use of Virtual Reality Tools for Vestibular Disorders Rehabilitation: A Comprehensive Analysis

PubMed Central

Bergeron, Mathieu; Lortie, Catherine L.; Guitton, Matthieu J.

2015-01-01

Classical peripheral vestibular disorders rehabilitation is a long and costly process. While virtual reality settings have been repeatedly suggested to represent possible tools to help the rehabilitation process, no systematic study had been conducted so far. We systematically reviewed the current literature to analyze the published protocols documenting the use of virtual reality settings for peripheral vestibular disorders rehabilitation. There is an important diversity of settings and protocols involving virtual reality settings for the treatment of this pathology. Evaluation of the symptoms is often not standardized. However, our results unveil a clear effect of virtual reality settings-based rehabilitation of the patients' symptoms, assessed by objectives tools such as the DHI (mean decrease of 27 points), changing symptoms handicap perception from moderate to mild impact on life. Furthermore, we detected a relationship between the duration of the exposure to virtual reality environments and the magnitude of the therapeutic effects, suggesting that virtual reality treatments should last at least 150 minutes of cumulated exposure to ensure positive outcomes. Virtual reality offers a pleasant and safe environment for the patient. Future studies should standardize evaluation tools, document putative side effects further, compare virtual reality to conventional physical therapy, and evaluate economical costs/benefits of such strategies. PMID:26556560

Development of a web-based application and multicountry analysis framework for assessing interdicted infections and cost-utility of screening donated blood for HIV, HCV and HBV.

PubMed

Custer, B; Janssen, M P; Hubben, G; Vermeulen, M; van Hulst, M

2017-08-01

Most countries test donations for HIV, HCV and HBV using serology with or without nucleic acid testing (NAT). Cost-utility analyses provide information on the relative value of different screening options. The aim of this project was to develop an open access risk assessment and cost-utility analysis web-tool for assessing HIV, HCV and HBV screening options (http://www.isbtweb.org/working-parties/transfusion-transmitted-infectious-diseases/). An analysis for six countries (Brazil, Ghana, the Netherlands, South Africa, Thailand and USA) was conducted. Four strategies; (1) antibody assays (Abs) for HIV and HCV + HBsAg, (2) antibody assays that include antigens for HIV and HCV (Combo) + HBsAg, (3) NAT in minipools of variable size (MP NAT) and (4) individual donation (ID) NAT can be evaluated using the tool. Country-specific data on donors, donation testing results, recipient outcomes and costs are entered using the online interface. Results obtained include the number infections interdicted using each screening options, and the (incremental and average) cost-utility of the options. In each of the six countries evaluated, the use of antibody assays is cost effective or even cost saving. NAT has varying cost-utility depending on the setting, and where adopted, the incremental cost-utility exceeds any previously defined or proposed threshold in each country. The web-tool allows an assessment of infectious units interdicted and value for money of different testing strategies. Regardless of gross national income (GNI) per capita, countries appear willing to dedicate healthcare resources to blood supply safety in excess of that for other sectors of health care. © 2017 International Society of Blood Transfusion.

Cost-effectiveness analysis of sandhill crane habitat management

USGS Publications Warehouse

Kessler, Andrew C.; Merchant, James W.; Shultz, Steven D.; Allen, Craig R.

2013-01-01

Invasive species often threaten native wildlife populations and strain the budgets of agencies charged with wildlife management. We demonstrate the potential of cost-effectiveness analysis to improve the efficiency and value of efforts to enhance sandhill crane (Grus canadensis) roosting habitat. We focus on the central Platte River in Nebraska (USA), a region of international ecological importance for migrating avian species including sandhill cranes. Cost-effectiveness analysis is a valuation process designed to compare alternative actions based on the cost of achieving a pre-determined objective. We estimated costs for removal of invasive vegetation using geographic information system simulations and calculated benefits as the increase in area of sandhill crane roosting habitat. We generated cost effectiveness values for removing invasive vegetation on 7 land parcels and for the entire central Platte River to compare the cost-effectiveness of management at specific sites and for the central Platte River landscape. Median cost effectiveness values for the 7 land parcels evaluated suggest that costs for creating 1 additional hectare of sandhill crane roosting habitat totaled US $1,595. By contrast, we found that creating an additional hectare of sandhill crane roosting habitat could cost as much as US $12,010 for some areas in the central Platte River, indicating substantial cost savings can be achieved by using a cost effectiveness analysis to target specific land parcels for management. Cost-effectiveness analysis, used in conjunction with geographic information systems, can provide decision-makers with a new tool for identifying the most economically efficient allocation of resources to achieve habitat management goals.

WMOST 1.0 Download Page

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) allows water-resource managers and planners to screen a wide range of practices for cost-effectiveness in achieving watershed or water utilities management goals.

Space system operations and support cost analysis using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.; Moore, Arlene A.; Fairbairn, Robert E.

1990-01-01

This paper evaluates the use of Markov chain process in probabilistic life cycle cost analysis and suggests further uses of the process as a design aid tool. A methodology is developed for estimating operations and support cost and expected life for reusable space transportation systems. Application of the methodology is demonstrated for the case of a hypothetical space transportation vehicle. A sensitivity analysis is carried out to explore the effects of uncertainty in key model inputs.

Integrated Modeling Approach for Optimal Management of Water, Energy and Food Security Nexus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xiaodong; Vesselinov, Velimir Valentinov

We report that water, energy and food (WEF) are inextricably interrelated. Effective planning and management of limited WEF resources to meet current and future socioeconomic demands for sustainable development is challenging. WEF production/delivery may also produce environmental impacts; as a result, green-house-gas emission control will impact WEF nexus management as well. Nexus management for WEF security necessitates integrated tools for predictive analysis that are capable of identifying the tradeoffs among various sectors, generating cost-effective planning and management strategies and policies. To address these needs, we have developed an integrated model analysis framework and tool called WEFO. WEFO provides a multi-periodmore » socioeconomic model for predicting how to satisfy WEF demands based on model inputs representing productions costs, socioeconomic demands, and environmental controls. WEFO is applied to quantitatively analyze the interrelationships and trade-offs among system components including energy supply, electricity generation, water supply-demand, food production as well as mitigation of environmental impacts. WEFO is demonstrated to solve a hypothetical nexus management problem consistent with real-world management scenarios. Model parameters are analyzed using global sensitivity analysis and their effects on total system cost are quantified. Lastly, the obtained results demonstrate how these types of analyses can be helpful for decision-makers and stakeholders to make cost-effective decisions for optimal WEF management.« less

Integrated Modeling Approach for Optimal Management of Water, Energy and Food Security Nexus

DOE PAGES

Zhang, Xiaodong; Vesselinov, Velimir Valentinov

2016-12-28

We report that water, energy and food (WEF) are inextricably interrelated. Effective planning and management of limited WEF resources to meet current and future socioeconomic demands for sustainable development is challenging. WEF production/delivery may also produce environmental impacts; as a result, green-house-gas emission control will impact WEF nexus management as well. Nexus management for WEF security necessitates integrated tools for predictive analysis that are capable of identifying the tradeoffs among various sectors, generating cost-effective planning and management strategies and policies. To address these needs, we have developed an integrated model analysis framework and tool called WEFO. WEFO provides a multi-periodmore » socioeconomic model for predicting how to satisfy WEF demands based on model inputs representing productions costs, socioeconomic demands, and environmental controls. WEFO is applied to quantitatively analyze the interrelationships and trade-offs among system components including energy supply, electricity generation, water supply-demand, food production as well as mitigation of environmental impacts. WEFO is demonstrated to solve a hypothetical nexus management problem consistent with real-world management scenarios. Model parameters are analyzed using global sensitivity analysis and their effects on total system cost are quantified. Lastly, the obtained results demonstrate how these types of analyses can be helpful for decision-makers and stakeholders to make cost-effective decisions for optimal WEF management.« less

Improving Balance in TBI Using a Low-Cost Customized Virtual Reality Rehabilitation Tool

DTIC Science & Technology

2016-10-01

AWARD NUMBER: W81XWH-14-2-0150 TITLE: Improving Balance in TBI Using a Low-Cost Customized Virtual Reality Rehabilitation Tool PRINCIPAL...AND SUBTITLE Improving Balance in TBI Using a Low-Cost Customized Virtual Reality Rehabilitation Tool 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH...Distribution Unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT The proposed study will implement and evaluate a novel, low-cost, Virtual Reality (VR

Crash Attenuator Data Collection and Life Cycle Tool Development

DOT National Transportation Integrated Search

2014-06-14

This research study was aimed at data collection and development of a decision support tool for life cycle cost assessment of crash attenuators. Assessing arrenuator life cycle costs based on in-place expected costs and not just the initial cost enha...

Chronic obstructive pulmonary disease case finding by community pharmacists: a potential cost-effective public health intervention.

PubMed

Wright, David; Twigg, Michael; Thornley, Tracey

2015-02-01

This study aims to pilot a community pharmacy chronic obstructive pulmonary disease (COPD) case finding service in England, estimating costs and effects. Patients potentially at risk of COPD were screened with validated tools. Smoking cessation was offered to all smokers identified as potentially having undiagnosed COPD. Cost and effects of the service were estimated. Twenty-one community pharmacies screened 238 patients over 9 months. One hundred thirty-five patients were identified with potentially undiagnosed COPD; 88 were smokers. Smoking cessation initiation provided a project gain of 38.62 life years, 19.92 quality-adjusted life years and a cost saving of £392.67 per patient screened. COPD case finding by community pharmacists potentially provides cost-savings and improves quality of life. © 2014 The Authors. International Journal of Pharmacy Practice published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society.

Comparison of the Wii Balance Board and the BESS tool measuring postural stability in collegiate athletes.

PubMed

Guzman, Jill; Aktan, Nadine

2016-02-01

Concussions are a major health concern for athletes given the potential for these injuries in a wide range of sport activities. The leading concern for clinicians is that athletes are at risk for devastating consequences if they are not evaluated properly and cleared too early to return to play or competition. The evaluation of postural stability has been identified as an important aspect to the comprehensive management of such injuries. Clinicians are in need of a portable tool they can use in various settings to aid in decision making and health care delivery for concussed athletes. The Nintendo Wii Balance Board (Nintendo of America Inc., Redmond, Washington) is a portable, cost-effective tool that has the potential to aid in the evaluation of postural stability in concussed individuals. The purpose of this study was to evaluate the Wii Balance Board as an objective, user-friendly, cost effective, valid alternative tool for the measurement of postural stability in college athletes. This study questioned whether the Wii Balance Board, when compared to the Balance Error Scoring System (BESS), is an objective tool that can be used as an acceptable measurement of postural stability in college athletes. Copyright © 2015 Elsevier Inc. All rights reserved.

Cost-Effectiveness Analysis of Morcellation Hysterectomy for Myomas.

PubMed

Bortoletto, Pietro; Einerson, Brett D; Miller, Emily S; Milad, Magdy P

2015-01-01

To estimate the cost-effectiveness of eliminating morcellation in the surgical treatment of leiomyomas from a societal perspective. Cost-effectiveness analysis. Not applicable. A theoretical cohort of women undergoing hysterectomy for myoma disease large enough to require morcellation. None. None. A decision analysis model was constructed using probabilities, costs, and utility data from published sources. A cost-effectiveness analysis analyzing both quality-adjusted life years (QALYs) and cases of disseminated cancer was performed to determine the incremental cost-effectiveness ratio (ICER) of eliminating morcellation as a tool in the surgical treatment of leiomyomas. Costs and utilities were discounted using standard methodology. The base case included health care system costs and costs incurred by the patient for surgery-related disability. One-way sensitivity analyses were performed to assess the effect of various assumptions. The cost to prevent 1 case of disseminated cancer was $10 540 832. A strategy of nonmorcellation hysterectomy via laparotomy costed more ($30 359.92 vs $20 853.15) and yielded more QALYs (21.284 vs 21.280) relative to morcellation hysterectomy. The ICER for nonmorcellation hysterectomy compared with morcellation hysterectomy was $2 184 172 per QALY. Health care costs (prolonged hospitalizations) and costs to patients of prolonged time away from work were the primary drivers of cost differential between the 2 strategies. Even when the incidence of occult sarcoma in leiomyoma surgery was ranged to twice that reported in the literature (.98%), the ICER for nonmorcellation hysterectomy was $644 393.30. Eliminating morcellation hysterectomy as a treatment for myomas is not cost-effective under a wide variety of probability and cost assumptions. Performing laparotomy for all patients who might otherwise be candidates for morcellation hysterectomy is a costly policy from a societal perspective. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

The cost of biomedical equipment repair and maintenance: results of a survey.

PubMed

Cohen, T

1982-01-01

The survey presented in this paper shows that for 19 large hospitals the average ratio of equipment repair costs to acquisition cost was 7.4%. In addition, this survey shows that costs such as rent for building space, utilities, and test equipment are not included in many clinical engineering department budgets. This is one reason for the divergent cost data reported by the various hospitals. These costs should be considered particularly for comparisons between in-house service costs and other sources of service. It seems that, of the indicators observed in this survey, equipment acquisition cost provides the best indicator for equipment maintenance costs. All hospital finance officers should have acquisition value information, because this information is used in calculating capital equipment depreciation. This information should also be available to clinical engineers. In addition, procedures need to be set up so that the total annual repair and maintenance costs can be easily obtained from hospital finance departments. Providing the clinical engineer with this type of data will allow further analysis of repair cost and will aid in long-term planning for the hospital. The ratio of equipment repair cost to acquisition value may be useful as a tool to predict future costs of a given hospital's medical equipment maintenance. This tool may also be useful as a measurement of the effectiveness of a change in a hospital's approach to biomedical equipment maintenance. Further work must be done to standardize equipment maintenance cost reporting so that more detailed comparisons can be made.

Costing behavioral interventions: a practical guide to enhance translation.

PubMed

Ritzwoller, Debra P; Sukhanova, Anna; Gaglio, Bridget; Glasgow, Russell E

2009-04-01

Cost and cost effectiveness of behavioral interventions are critical parts of dissemination and implementation into non-academic settings. Due to the lack of indicative data and policy makers' increasing demands for both program effectiveness and efficiency, cost analyses can serve as valuable tools in the evaluation process. To stimulate and promote broader use of practical techniques that can be used to efficiently estimate the implementation costs of behavioral interventions, we propose a set of analytic steps that can be employed across a broad range of interventions. Intervention costs must be distinguished from research, development, and recruitment costs. The inclusion of sensitivity analyses is recommended to understand the implications of implementation of the intervention into different settings using different intervention resources. To illustrate these procedures, we use data from a smoking reduction practical clinical trial to describe the techniques and methods used to estimate and evaluate the costs associated with the intervention. Estimated intervention costs per participant were $419, with a range of $276 to $703, depending on the number of participants.

The clinical effectiveness and cost-effectiveness of clinical nurse specialist-led hospital to home transitional care: a systematic review.

PubMed

Bryant-Lukosius, Denise; Carter, Nancy; Reid, Kim; Donald, Faith; Martin-Misener, Ruth; Kilpatrick, Kelley; Harbman, Patricia; Kaasalainen, Sharon; Marshall, Deborah; Charbonneau-Smith, Renee; DiCenso, Alba

2015-10-01

Clinical nurse specialists (CNSs) are major providers of transitional care. This paper describes a systematic review of randomized controlled trials (RCTs) evaluating the clinical effectiveness and cost-effectiveness of CNS transitional care. We searched 10 electronic databases, 1980 to July 2013, and hand-searched reference lists and key journals for RCTs that evaluated health system outcomes of CNS transitional care. Study quality was assessed using the Cochrane Risk of Bias and Quality of Health Economic Studies tools. The quality of evidence for individual outcomes was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) tool. We pooled data for similar outcomes. Thirteen RCTs of CNS transitional care were identified (n = 2463 participants). The studies had low (n = 3), moderate (n = 8) and high (n = 2) risk of bias and weak economic analyses. Post-cancer surgery, CNS care was superior in reducing patient mortality. For patients with heart failure, CNS care delayed time to and reduced death or re-hospitalization, improved treatment adherence and patient satisfaction, and reduced costs and length of re-hospitalization stay. For elderly patients and caregivers, CNS care improved caregiver depression and reduced re-hospitalization, re-hospitalization length of stay and costs. For high-risk pregnant women and very low birthweight infants, CNS care improved infant immunization rates and maternal satisfaction with care and reduced maternal and infant length of hospital stay and costs. There is low-quality evidence that CNS transitional care improves patient health outcomes, delays re-hospitalization and reduces hospital length of stay, re-hospitalization rates and costs. Further research incorporating robust economic evaluation is needed. © 2015 John Wiley & Sons, Ltd.

Using block pulse functions for seismic vibration semi-active control of structures with MR dampers

NASA Astrophysics Data System (ADS)

Rahimi Gendeshmin, Saeed; Davarnia, Daniel

2018-03-01

This article applied the idea of block pulse functions in the semi-active control of structures. The BP functions give effective tools to approximate complex problems. The applied control algorithm has a major effect on the performance of the controlled system and the requirements of the control devices. In control problems, it is important to devise an accurate analytical technique with less computational cost. It is proved that the BP functions are fundamental tools in approximation problems which have been applied in disparate areas in last decades. This study focuses on the employment of BP functions in control algorithm concerning reduction the computational cost. Magneto-rheological (MR) dampers are one of the well-known semi-active tools that can be used to control the response of civil Structures during earthquake. For validation purposes, numerical simulations of a 5-story shear building frame with MR dampers are presented. The results of suggested method were compared with results obtained by controlling the frame by the optimal control method based on linear quadratic regulator theory. It can be seen from simulation results that the suggested method can be helpful in reducing seismic structural responses. Besides, this method has acceptable accuracy and is in agreement with optimal control method with less computational costs.

Calculation of the Actual Cost of Engine Maintenance

DTIC Science & Technology

2003-03-01

Cost Estimating Integrated Tools ( ACEIT ) helps analysts store, retrieve, and analyze data; build cost models; analyze risk; time phase budgets; and...Tools ( ACEIT ).” n. pag. http://www.aceit.com/ 21 February 2003. • USAMC Logistics Support Activity (LOGSA). “Cost Analysis Strategy Assessment

Analysis of laparoscopy in trauma.

PubMed

Villavicencio, R T; Aucar, J A

1999-07-01

The optimum roles for laparoscopy in trauma have yet to be established. To date, reviews of laparoscopy in trauma have been primarily descriptive rather than analytic. This article analyzes the results of laparoscopy in trauma. Outcome analysis was done by reviewing 37 studies with more than 1,900 trauma patients, and laparoscopy was analyzed as a screening, diagnostic, or therapeutic tool. Laparoscopy was regarded as a screening tool if it was used to detect or exclude a positive finding (eg, hemoperitoneum, organ injury, gastrointestinal spillage, peritoneal penetration) that required operative exploration or repair. Laparoscopy was regarded as a diagnostic tool when it was used to identify all injuries, rather than as a screening tool to identify the first indication for a laparotomy. It was regarded as a diagnostic tool only in studies that mandated a laparotomy (gold standard) after laparoscopy to confirm the diagnostic accuracy of laparoscopic findings. Costs and charges for using laparoscopy in trauma were analyzed when feasible. As a screening tool, laparoscopy missed 1% of injuries and helped prevent 63% of patients from having a trauma laparotomy. When used as a diagnostic tool, laparoscopy had a 41% to 77% missed injury rate per patient. Overall, laparoscopy carried a 1% procedure-related complication rate. Cost-effectiveness has not been uniformly proved in studies comparing laparoscopy and laparotomy. Laparoscopy has been applied safely and effectively as a screening tool in stable patients with acute trauma. Because of the large number of missed injuries when used as a diagnostic tool, its value in this context is limited. Laparoscopy has been reported infrequently as a therapeutic tool in selected patients, and its use in this context requires further study.

Alternative Fuels Data Center: Biodiesel Vehicle Emissions

Science.gov Websites

Petroleum Reduction Planning Tool AFLEET Tool All Tools Vehicle Cost Calculator Choose a vehicle to compare fuel cost and emissions with a conventional vehicle. Select Fuel/Technology Electric Hybrid Electric Cost Calculator Vehicle 0 City 0 Hwy (mi/gal) 0 City 0 Hwy (kWh/100m) Gasoline Vehicle 0 City 0 Hwy (mi

75 FR 13289 - Agency Information Collection Request, 60-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... Tool Program Director 45 4 3 540 CPPW Cost Study Tool Business Manager 45 4 3 540 CPPW Cost Study Tool... performance of the agency's functions; (2) the accuracy of the estimated burden; (3) ways to enhance the... Prevention to Work Cost Study Instrument--OMB No. 0990-NEW- Office of the Assistant Secretary for Planning...

Similarities and differences between stakeholders' opinions on using Health Technology Assessment (HTA) information across five European countries: results from the EQUIPT survey.

PubMed

Vokó, Zoltan; Cheung, Kei Long; Józwiak-Hagymásy, Judit; Wolfenstetter, Silke; Jones, Teresa; Muñoz, Celia; Evers, Silvia M A A; Hiligsmann, Mickaël; de Vries, Hein; Pokhrel, Subhash

2016-05-26

The European-study on Quantifying Utility of Investment in Protection from Tobacco (EQUIPT) project aimed to study transferability of economic evidence by co-creating the Tobacco Return On Investment (ROI) tool, previously developed in the United Kingdom, for four sample countries (Germany, Hungary, Spain and the Netherlands). The EQUIPT tool provides policymakers and stakeholders with customized information about the economic and wider returns on the investment in evidence-based tobacco control, including smoking cessation interventions. A Stakeholder Interview Survey was developed to engage with the stakeholders in early phases of the development and country adaptation of the ROI tool. The survey assessed stakeholders' information needs, awareness about underlying principles used in economic analyses, opinion about the importance, effectiveness and cost-effectiveness of tobacco control interventions, and willingness to use a Health Technology Assessment (HTA) tool such as the ROI tool. A cross sectional study using a mixed method approach was conducted among participating stakeholders in the sample countries and the United Kingdom. The individual questionnaire contained open-ended questions as well as single choice and 7- or 3-point Likert-scale questions. The results corresponding to the priority and needs assessment and to the awareness of stakeholders about underlying principles used in economic analysis are analysed by country and stakeholder categories. Stakeholders considered it important that the decisions on the investments in tobacco control interventions should be supported by scientific evidence, including prevalence of smoking, cost of smoking, quality of life, mortality due to smoking, and effectiveness, cost-effectiveness and budget impact of smoking cessation interventions. The proposed ROI tool was required to provide this granularity of information. The majority of the stakeholders were aware of the general principles of economic analyses used in decision making contexts but they did not appear to have in-depth knowledge about specific technical details. Generally, stakeholders' answers showed larger variability by country than by stakeholder category. Stakeholders across different European countries viewed the use of HTA evidence to be an important factor in their decision-making process. Further, they considered themselves to be capable of interpreting the results from a ROI tool and were highly motivated to use it.

Low-Cost National Media-Based Surveillance System for Public Health Events, Bangladesh

PubMed Central

Ao, Trong T.; Rahman, Mahmudur; Haque, Farhana; Chakraborty, Apurba; Hossain, M. Jahangir; Haider, Sabbir; Alamgir, A.S.M.; Sobel, Jeremy; Luby, Stephen P.

2016-01-01

We assessed a media-based public health surveillance system in Bangladesh during 2010–2011. The system is a highly effective, low-cost, locally appropriate, and sustainable outbreak detection tool that could be used in other low-income, resource-poor settings to meet the capacity for surveillance outlined in the International Health Regulations 2005. PMID:26981877

Tradespace and Affordability - Phase 1

DTIC Science & Technology

2013-07-09

assessment options Cost-effectiveness, risk reduction leverage/ROI, rework avoidance Tool, data, scenario availability Contract Number: H98230-08-D-0171...Prepare FED assessment plans and earned value milestones Try to relate earned value to risk -exposure avoided rather than budgeted cost F. Begin...evaluate and iterate plans and enablers I. Assess readiness for Commitment Review Shortfalls identified as risks and covered by risk mitigation

Economic implications of resistance to antimalarial drugs.

PubMed

Phillips, M; Phillips-Howard, P A

1996-09-01

The widespread evolution of drug resistance in malarial parasites has seriously hampered efforts to control this debilitating disease. Chloroquine, the mainstay of malaria treatment for many decades, is now proving largely ineffective in many parts of the world, particularly against the most severe form of malaria--falciparum. Alternative drugs have been developed, but they are frequently less safe and are all between 50 and 700% more expensive than chloroquine. Choice of drug clearly has important budgetary implications and national malaria control programmes need to weigh up the costs and benefits in deciding whether to change to more effective but more expensive drugs. The growth in drug resistance also has implications for the choice of diagnostic tool. Clinical diagnosis of malaria is relatively cheap, but less specific than some technological approaches. As more expensive drugs are employed, the cost of wasted treatment on suspected cases who do not in fact have malaria rises and the more worthwhile it becomes to invest in more specific diagnostic techniques. This paper presents an economic framework for analysing the various malaria drug and diagnostic tool options available. It discusses the nature of the key factors that need to be considered when making choices of malaria treatment (including treatment costs, drug resistance, the costs of treatment failure and compliance) and diagnosis (including diagnosis cost and accuracy, and the often overlooked costs associated with delayed treatment), and uses some simple equations to illustrate the impact of these on the relative cost effectiveness of the alternatives being considered. On the basis of some simplifying assumptions and illustrative calculations, it appears that in many countries more effective drugs and more specific and rapid diagnostic approaches will be worth adopting even although they imply additional expense.

Aeroelastic Stability Investigations for Large-scale Vertical Axis Wind Turbines

NASA Astrophysics Data System (ADS)

Owens, B. C.; Griffith, D. T.

2014-06-01

The availability of offshore wind resources in coastal regions, along with a high concentration of load centers in these areas, makes offshore wind energy an attractive opportunity for clean renewable electricity production. High infrastructure costs such as the offshore support structure and operation and maintenance costs for offshore wind technology, however, are significant obstacles that need to be overcome to make offshore wind a more cost-effective option. A vertical-axis wind turbine (VAWT) rotor configuration offers a potential transformative technology solution that significantly lowers cost of energy for offshore wind due to its inherent advantages for the offshore market. However, several potential challenges exist for VAWTs and this paper addresses one of them with an initial investigation of dynamic aeroelastic stability for large-scale, multi-megawatt VAWTs. The aeroelastic formulation and solution method from the BLade Aeroelastic STability Tool (BLAST) for HAWT blades was employed to extend the analysis capability of a newly developed structural dynamics design tool for VAWTs. This investigation considers the effect of configuration geometry, material system choice, and number of blades on the aeroelastic stability of a VAWT, and provides an initial scoping for potential aeroelastic instabilities in large-scale VAWT designs.

Getting it right when budgets are tight: Using optimal expansion pathways to prioritize responses to concentrated and mixed HIV epidemics

PubMed Central

Kerr, Cliff C.; Haghparast-Bidgoli, Hassan; Estill, Janne; Grobicki, Laura; Baranczuk, Zofia; Prieto, Lorena; Montañez, Vilma; Reporter, Iyanoosh; Gray, Richard T.; Skordis-Worrall, Jolene; Keiser, Olivia; Cheikh, Nejma; Boonto, Krittayawan; Osornprasop, Sutayut; Lavadenz, Fernando; Benedikt, Clemens J.; Martin-Hughes, Rowan; Hussain, S. Azfar; Kelly, Sherrie L.; Kedziora, David J.; Wilson, David P.

2017-01-01

Background Prioritizing investments across health interventions is complicated by the nonlinear relationship between intervention coverage and epidemiological outcomes. It can be difficult for countries to know which interventions to prioritize for greatest epidemiological impact, particularly when budgets are uncertain. Methods We examined four case studies of HIV epidemics in diverse settings, each with different characteristics. These case studies were based on public data available for Belarus, Peru, Togo, and Myanmar. The Optima HIV model and software package was used to estimate the optimal distribution of resources across interventions associated with a range of budget envelopes. We constructed “investment staircases”, a useful tool for understanding investment priorities. These were used to estimate the best attainable cost-effectiveness of the response at each investment level. Findings We find that when budgets are very limited, the optimal HIV response consists of a smaller number of ‘core’ interventions. As budgets increase, those core interventions should first be scaled up, and then new interventions introduced. We estimate that the cost-effectiveness of HIV programming decreases as investment levels increase, but that the overall cost-effectiveness remains below GDP per capita. Significance It is important for HIV programming to respond effectively to the overall level of funding availability. The analytic tools presented here can help to guide program planners understand the most cost-effective HIV responses and plan for an uncertain future. PMID:28972975

Using a Client Survey to Support Continuous Improvement: An Australian Case Study in Managing Change

ERIC Educational Resources Information Center

Besch, Janice

2014-01-01

With the arrival of online survey tools that are low-cost, readily available and easy to administer, all organizations have access to one of the most effective mechanisms for determining quality improvement priorities and measuring progress towards achieving those priorities over time. This case study outlines the use made of this simple tool by a…

Virtual Laboratory "vs." Traditional Laboratory: Which Is More Effective for Teaching Electrochemistry?

ERIC Educational Resources Information Center

Hawkins, Ian; Phelps, Amy J.

2013-01-01

The use of virtual laboratories has become an increasing issue regarding science laboratories due to the increasing cost of hands-on laboratories, and the increase in distance education. Recent studies have looked at the use of virtual tools for laboratory to be used as supplements to the regular hands-on laboratories but many virtual tools have…

Old Tools for New Problems: Modifying Master Gardener Training to Improve Food Access in Rural Areas

ERIC Educational Resources Information Center

Randle, Anne

2015-01-01

Extension faces ever-changing problems, which can be addressed by modifying successful tools rather than inventing new ones. The Master Gardener program has proven its effectiveness, but the cost and time commitment can make it inaccessible to rural, low-income communities, where training in home gardening may address issues of food access and…

The lithographer's dilemma: shrinking without breaking the bank

NASA Astrophysics Data System (ADS)

Levinson, Harry J.

2013-10-01

It can no longer be assumed that the lithographic scaling which has previously driven Moore's Law will lead in the future to reduced cost per transistor. Until recently, higher prices for lithography tools were offset by improvements in scanner productivity. The necessity of using double patterning to extend scaling beyond the single exposure resolution limit of optical lithography has resulted in a sharp increase in the cost of patterning a critical construction layer that has not been offset by improvements in exposure tool productivity. Double patterning has also substantially increased the cost of mask sets. EUV lithography represents a single patterning option, but the combination of very high exposure tools prices, moderate throughput, high maintenance costs, and expensive mask blanks makes this a solution more expensive than optical double patterning but less expensive than triple patterning. Directed self-assembly (DSA) could potentially improve wafer costs, but this technology currently is immature. There are also design layout and process integration issues associated with DSA that need to be solved in order to obtain full benefit from tighter pitches. There are many approaches for improving the cost effectiveness of lithography. Innovative double patterning schemes lead to smaller die. EUV lithography productivity can be improved with higher power light sources and improved reliability. There are many technical and business challenges for extending EUV lithography to higher numerical apertures. Efficient contact hole and cut mask solutions are needed, as well as very tight overlay control, regardless of lithographic solution.

The Effects of Cryogenic Treatment on Cutting Tools

NASA Astrophysics Data System (ADS)

Kumar, Satish; Khedkar, Nitin K.; Jagtap, Bhushan; Singh, T. P.

2017-08-01

Enhancing the cutting tool life is important and economic factor to reduce the tooling as well as manufacturing cost. The tool life is improved considerably by 92 % after cryogenic treatment. The cryogenic treatment is a one-time permanent, sub-zero heat treatment that entirely changes cross-section of cutting tool. The cryogenic treatment is carried out with deep freezing of cutting tool materials to enhance physical and mechanical properties. The cryogenic treatment improves mechanical such as hardness, toughness and tribological properties such as wear resistance, coefficient of friction, surface finish, dimensional stability and stress relief. The deep cryogenic treatment is the most beneficial treatment applied on cutting tools. The cryogenic treatment is the most advanced heat treatment and popular to improve performance of the cutting tool. The optimization of cryogenic treatment variables is necessary to improve tool life. This study reviews the effects of cryogenic treatment on microstructure, tribological properties of tool steels and machining applications of cutting tool by investigating the surface and performing the surface characterization test like SEM. The economy of cutting tool can be achieved by deep cryogenic treatment.

Hydrological and thermal effects of hydropeaking on early life stages of salmonids: A modelling approach for implementing mitigation strategies.

PubMed

Casas-Mulet, Roser; Saltveit, Svein Jakob; Alfredsen, Knut Tore

2016-12-15

Alterations in hydrological and thermal regimes can potentially affect salmonid early life stages development and survival. The dewatering of salmon spawning redds due to hydropeaking can lead to mortality in early life stages, with higher impact on the alevins as they have lower tolerance to dewatering than the eggs. Flow-related mitigation measures can reduce early life stage mortality. We present a set of modelling tools to assess impacts and mitigation options to minimise the risk of mortality in early life stages in hydropeaking rivers. We successfully modelled long-term hydrological and thermal alterations and consequences for development rates. We estimated the risk of early life stages mortality and assessed the cost-effectiveness of implementing three release-related mitigation options (A,B,C). The economic cost of mitigation was low and ranged between 0.7% and 2.6% of the annual hydropower production. Options reducing the flow during spawning (B and C) in addition to only release minimum flows during development (A) were considered more effective for egg and alevin survival. Options B and C were however constraint by water availability in the system for certain years, and therefore only option A was always feasible. The set of modelling tools used in this study were satisfactory and their applications can be useful especially in systems where little field data is available. Targeted measures built on well-informed modelling tools can be tested on their effectiveness to mitigate dewatering effects vs. the hydropower system capacity to release or conserve water for power production. Environmental flow releases targeting specific ecological objectives can provide better cost-effective options than conventional operational rules complying with general legislation. Copyright © 2016 Elsevier B.V. All rights reserved.

Medicare's prospective payment system: A critical appraisal

PubMed Central

Coulam, Robert F.; Gaumer, Gary L.

1992-01-01

Implementation of the Medicare prospective payment system (PPS) for hospital payment has produced major changes in the hospital industry and in the way hospital services are used by physicians and their patients. The substantial published literature that examines these changes is reviewed in this article. This literature suggests that most of the intended effects of PPS on costs and intensity of care have been realized. But the literature fails to answer fundamental questions about the effectiveness and equity of administered pricing as a policy tool for cost containment. The literature offers some hope that the worst fears about the effects of PPS on quality of care and the health of the hospital industry have not materialized. But because of data lags, the studies done to date seem to tell us more about the effects of the early, more generous period of PPS than about the opportunity costs of reducing hospital cost inflation. PMID:25372306

A Layered Decision Model for Cost-Effective System Security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Huaqiang; Alves-Foss, James; Soule, Terry

System security involves decisions in at least three areas: identification of well-defined security policies, selection of cost-effective defence strategies, and implementation of real-time defence tactics. Although choices made in each of these areas affect the others, existing decision models typically handle these three decision areas in isolation. There is no comprehensive tool that can integrate them to provide a single efficient model for safeguarding a network. In addition, there is no clear way to determine which particular combinations of defence decisions result in cost-effective solutions. To address these problems, this paper introduces a Layered Decision Model (LDM) for use inmore » deciding how to address defence decisions based on their cost-effectiveness. To validate the LDM and illustrate how it is used, we used simulation to test model rationality and applied the LDM to the design of system security for an e-commercial business case.« less

The cost of HIV medication adherence support interventions: results of a cross-site evaluation.

PubMed

Schackman, B R; Finkelstein, R; Neukermans, C P; Lewis, L; Eldred, L

2005-11-01

The objective of this study was to determine the direct cost of HIV adherence support programmes participating in a cross-site evaluation in the US. Data on the frequency, type, and setting of adherence encounters; providers' professions; and adherence tools provided were collected for 1,122 patients enrolled in 13 interventions at 9 sites. The site staff estimated the average duration of each type of encounter and national wage rates were used for labour costs. The median (range) adherence encounters/year among interventions was 16.5 (4.3-104.6) per patient; encounters lasted 24.6 (8.9-40.9) minutes. Intervention direct cost was correlated with the average frequency of encounters (r = 0.57), but not with encounter duration or providers' professions. The median direct cost/month was 35 dollars(5 dollars-58 dollars) per patient, and included direct provider costs (66%); incentives (17%); reminders and other tools (8%); and direct administrative time, provider transportation, training, and home delivery (9%). The median direct cost/month from a societal perspective, which includes patient time and travel costs, was 47 dollars(24 dollars-114 dollars) per patient. Adherence interventions with moderate efficacy costing < or =100 dollars/month have been estimated to meet a cost-effectiveness threshold that is generally accepted in the US. Payers should consider enhanced reimbursement for adherence support services.

Using the simplified case mix tool (sCMT) to identify cost in special care dental services to support commissioning.

PubMed

Duane, B G; Freeman, R; Richards, D; Crosbie, S; Patel, P; White, S; Humphris, G

2017-03-01

To commission dental services for vulnerable (special care) patient groups effectively, consistently and fairly an evidence base is needed of the costs involved. The simplified Case Mixed Tool (sCMT) can assess treatment mode complexity for these patient groups. To determine if the sCMT can be used to identify costs of service provision. Patients (n=495) attending the Sussex Community NHS Trust Special Care Dental Service for care were assessed using the sCMT. sCMT score and costs (staffing, laboratory fees, etc.) besides patient age, whether a new patient and use of general anaesthetic/intravenous sedation. Statistical analysis (adjusted linear regression modelling) compared sCMT score and costs then sensitivity analyses of the costings to age, being a new patient and sedation use were undertaken. Regression tables were produced to present estimates of service costs. Costs increased with sCMT total scale and single item values in a predictable manner in all analyses except for 'cooperation'. Costs increased with the use of IV sedation; with each rising level of the sCMT, and with complexity in every sCMT category, except cooperation. Costs increased with increase in complexity of treatment mode as measured by sCMT scores. Measures such as the sCMT can provide predictions of the resource allocations required when commissioning special care dental services. Copyright© 2017 Dennis Barber Ltd.

Context-dependent ‘safekeeping’ of foraging tools in New Caledonian crows

PubMed Central

Klump, Barbara C.; van der Wal, Jessica E. M.; St Clair, James J. H.; Rutz, Christian

2015-01-01

Several animal species use tools for foraging, such as sticks to extract embedded arthropods and honey, or stones to crack open nuts and eggs. While providing access to nutritious foods, these behaviours may incur significant costs, such as the time and energy spent searching for, manufacturing and transporting tools. These costs can be reduced by re-using tools, keeping them safe when not needed. We experimentally investigated what New Caledonian crows do with their tools between successive prey extractions, and whether they express tool ‘safekeeping’ behaviours more often when the costs (foraging at height), or likelihood (handling of demanding prey), of tool loss are high. Birds generally took care of their tools (84% of 176 prey extractions, nine subjects), either trapping them underfoot (74%) or storing them in holes (26%)—behaviours we also observed in the wild (19 cases, four subjects). Moreover, tool-handling behaviour was context-dependent, with subjects: keeping their tools safe significantly more often when foraging at height; and storing tools significantly more often in holes when extracting more demanding prey (under these conditions, foot-trapping proved challenging). In arboreal environments, safekeeping can prevent costly tool losses, removing a potentially important constraint on the evolution of habitual and complex tool behaviour. PMID:25994674

Reliability and Productivity Modeling for the Optimization of Separated Spacecraft Interferometers

NASA Technical Reports Server (NTRS)

Kenny, Sean (Technical Monitor); Wertz, Julie

2002-01-01

As technological systems grow in capability, they also grow in complexity. Due to this complexity, it is no longer possible for a designer to use engineering judgement to identify the components that have the largest impact on system life cycle metrics, such as reliability, productivity, cost, and cost effectiveness. One way of identifying these key components is to build quantitative models and analysis tools that can be used to aid the designer in making high level architecture decisions. Once these key components have been identified, two main approaches to improving a system using these components exist: add redundancy or improve the reliability of the component. In reality, the most effective approach to almost any system will be some combination of these two approaches, in varying orders of magnitude for each component. Therefore, this research tries to answer the question of how to divide funds, between adding redundancy and improving the reliability of components, to most cost effectively improve the life cycle metrics of a system. While this question is relevant to any complex system, this research focuses on one type of system in particular: Separate Spacecraft Interferometers (SSI). Quantitative models are developed to analyze the key life cycle metrics of different SSI system architectures. Next, tools are developed to compare a given set of architectures in terms of total performance, by coupling different life cycle metrics together into one performance metric. Optimization tools, such as simulated annealing and genetic algorithms, are then used to search the entire design space to find the "optimal" architecture design. Sensitivity analysis tools have been developed to determine how sensitive the results of these analyses are to uncertain user defined parameters. Finally, several possibilities for the future work that could be done in this area of research are presented.

Development of computer-based analytical tool for assessing physical protection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mardhi, Alim, E-mail: alim-m@batan.go.id; Chulalongkorn University, Faculty of Engineering, Nuclear Engineering Department, 254 Phayathai Road, Pathumwan, Bangkok Thailand. 10330; Pengvanich, Phongphaeth, E-mail: ppengvan@gmail.com

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work,more » we have developed a computer–based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system’s detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.« less

Development of computer-based analytical tool for assessing physical protection system

NASA Astrophysics Data System (ADS)

Mardhi, Alim; Pengvanich, Phongphaeth

2016-01-01

Assessment of physical protection system effectiveness is the priority for ensuring the optimum protection caused by unlawful acts against a nuclear facility, such as unauthorized removal of nuclear materials and sabotage of the facility itself. Since an assessment based on real exercise scenarios is costly and time-consuming, the computer-based analytical tool can offer the solution for approaching the likelihood threat scenario. There are several currently available tools that can be used instantly such as EASI and SAPE, however for our research purpose it is more suitable to have the tool that can be customized and enhanced further. In this work, we have developed a computer-based analytical tool by utilizing the network methodological approach for modelling the adversary paths. The inputs are multi-elements in security used for evaluate the effectiveness of the system's detection, delay, and response. The tool has capability to analyze the most critical path and quantify the probability of effectiveness of the system as performance measure.

Practical thoughts on cost-benefit analysis and health services.

PubMed

Burchell, A; Weeden, R

1982-08-01

Cost-benefit analysis is fast becoming--if it is not already--an essential tool in decision making. It is, however, a complex subject, and one in which few doctors have been trained. This paper offers practical thoughts on the art of cost-benefit analysis, and is written for clinicians and other medical specialists who, though inexpert in the techniques of accountancy, nevertheless wish to carry out their own simple analyses in a manner that will enable them, and others, to take effective decisions.

Patient-based surveying: a cost-effective approach for reaching large markets.

PubMed

Byer, S

1995-01-01

Member-based surveying is an important tool for managed care companies to discern newer and better ways in which to keep their current members satisfied, develop products that will attract new members, and to gauge changes of course in health consumer opinion. This article discusses a consumer friendly and cost-effective method to survey members and the general public that has produced a very positive response for a modest investment. The response rate will likely improve over time as the method gains broader acceptance.

Health economic evaluation of a serum-based blood test for brain tumour diagnosis: exploration of two clinical scenarios.

PubMed

Gray, Ewan; Butler, Holly J; Board, Ruth; Brennan, Paul M; Chalmers, Anthony J; Dawson, Timothy; Goodden, John; Hamilton, Willie; Hegarty, Mark G; James, Allan; Jenkinson, Michael D; Kernick, David; Lekka, Elvira; Livermore, Laurent J; Mills, Samantha J; O'Neill, Kevin; Palmer, David S; Vaqas, Babar; Baker, Matthew J

2018-05-24

To determine the potential costs and health benefits of a serum-based spectroscopic triage tool for brain tumours, which could be developed to reduce diagnostic delays in the current clinical pathway. A model-based health pre-trial economic assessment. Decision tree models were constructed based on simplified diagnostic pathways. Models were populated with parameters identified from rapid reviews of the literature and clinical expert opinion. Explored as a test in both primary and secondary care (neuroimaging) in the UK health service, as well as application to the USA. Calculations based on an initial cohort of 10 000 patients. In primary care, it is estimated that the volume of tests would approach 75 000 per annum. The volume of tests in secondary care is estimated at 53 000 per annum. The primary outcome measure was quality-adjusted life-years (QALY), which were employed to derive incremental cost-effectiveness ratios (ICER) in a cost-effectiveness analysis. Results indicate that using a blood-based spectroscopic test in both scenarios has the potential to be highly cost-effective in a health technology assessment agency decision-making process, as ICERs were well below standard threshold values of £20 000-£30 000 per QALY. This test may be cost-effective in both scenarios with test sensitivities and specificities as low as 80%; however, the price of the test would need to be lower (less than approximately £40). Use of this test as triage tool in primary care has the potential to be both more effective and cost saving for the health service. In secondary care, this test would also be deemed more effective than the current diagnostic pathway. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development of a multiobjective optimization tool for the selection and placement of best management practices for nonpoint source pollution control

NASA Astrophysics Data System (ADS)

Maringanti, Chetan; Chaubey, Indrajeet; Popp, Jennie

2009-06-01

Best management practices (BMPs) are effective in reducing the transport of agricultural nonpoint source pollutants to receiving water bodies. However, selection of BMPs for placement in a watershed requires optimization of the available resources to obtain maximum possible pollution reduction. In this study, an optimization methodology is developed to select and place BMPs in a watershed to provide solutions that are both economically and ecologically effective. This novel approach develops and utilizes a BMP tool, a database that stores the pollution reduction and cost information of different BMPs under consideration. The BMP tool replaces the dynamic linkage of the distributed parameter watershed model during optimization and therefore reduces the computation time considerably. Total pollutant load from the watershed, and net cost increase from the baseline, were the two objective functions minimized during the optimization process. The optimization model, consisting of a multiobjective genetic algorithm (NSGA-II) in combination with a watershed simulation tool (Soil Water and Assessment Tool (SWAT)), was developed and tested for nonpoint source pollution control in the L'Anguille River watershed located in eastern Arkansas. The optimized solutions provided a trade-off between the two objective functions for sediment, phosphorus, and nitrogen reduction. The results indicated that buffer strips were very effective in controlling the nonpoint source pollutants from leaving the croplands. The optimized BMP plans resulted in potential reductions of 33%, 32%, and 13% in sediment, phosphorus, and nitrogen loads, respectively, from the watershed.

AOP-informed assessment of endocrine disruption in freshwater crustaceans

EPA Science Inventory

To date, most research focused on developing more efficient and cost effective methods to predict toxicity have focused on human biology. However, there is also a need for effective high throughput tools to predict toxicity to other species that perform critical ecosystem functio...

Investigating biochar as a tool for mine soil remediation

USDA-ARS?s Scientific Manuscript database

Biochar is a cost-effective, carbon negative soil amendment that can lead to improved soil quality. Research has also demonstrated the efficacy of biochar to sorb heavy metals and agricultural chemicals from contaminated soils, thus effectively reducing the potential for metal and chemical contamin...

[Prevention of Occupational Injuries Related to Hands: Calculation of Subsequent Injury Costs for the Austrian Social Occupational Insurance Institution (AUVA)].

PubMed

Rauner, M S; Mayer, B; Schaffhauser-Linzatti, M M

2015-08-01

Occupational injuries cause short-term, direct costs as well as long-term follow-up costs over the lifetime of the casualties. Due to shrinking budgets accident insurance companies focus on cost reduction programmes and prevention measures. For this reason, a decision support system for consequential cost calculation of occupational injuries was developed for the main Austrian social occupational insurance institution (AUVA) during three projects. This so-called cost calculation tool combines the traditional instruments of accounting with quantitative methods such as micro-simulation. The cost data are derived from AUVA-internal as well as external economic data sources. Based on direct and indirect costs, the subsequent occupational accident costs from the time of an accident and, if applicable, beyond the death of the individual casualty are predicted for the AUVA, the companies in which the casualties are working, and the other economic sectors. By using this cost calculation tool, the AUVA classifies risk groups and derives related prevention campaigns. In the past, the AUVA concentrated on falling, accidents at construction sites and in agriculture/forestry, as well as commuting accidents. Currently, among others, a focus on hand injuries is given and first prevention programmes have been initiated. Hand injuries represent about 38% of all casualties with average costs of about 7,851 Euro/case. Main causes of these accidents are cutting injuries in production, agriculture, and forestry. Beside a low, but costly, number of amputations with average costs of more than 100,000 Euro/case, bone fractures and strains burden the AUVA-budget with about 17,500 and 10,500 € per case, respectively. Decision support systems such as this cost calculation tool represent necessary instruments to identify risk groups and their injured body parts, causes of accidents, and economic activities, which highly burden the budget of an injury company, and help derive countermeasures to avoid injuries. Target-group specific, suitable prevention measures for hand injuries can reduce accidents in a cost-effective way and lower their consequences. © Georg Thieme Verlag KG Stuttgart · New York.

Examining the Effect of the Die Angle on Tool Load and Wear in the Extrusion Process

NASA Astrophysics Data System (ADS)

Nowotyńska, Irena; Kut, Stanisław

2014-04-01

The tool durability is a crucial factor in each manufacturing process, and this also includes the extrusion process. Striving to achieve the higher product quality should be accompanied by a long-term tool life and production cost reduction. This article presents the comparative research of load and wear of die at various angles of working cone during the concurrent extrusion. The numerical calculations of a tool load during the concurrent extrusion were performed using the MSC MARC software using the finite element method (FEM). Archard model was used to determine and compare die wear. This model was implemented in the software using the FEM. The examined tool deformations and stress distribution were determined based on the performed analyses. The die wear depth at various working cone angles was determined. Properly shaped die has an effect on the extruded material properties, but also controls loads, elastic deformation, and the tool life.

The cost-effectiveness of an intensive treatment protocol for severe dyslexia in children.

PubMed

Hakkaart-van Roijen, Leona; Goettsch, Wim G; Ekkebus, Michel; Gerretsen, Patty; Stolk, Elly A

2011-08-01

Studies of interventions for dyslexia have focused entirely on outcomes related to literacy. In this study, we considered a broader picture assessing improved quality of life compared with costs. A model served as a tool to compare costs and effects of treatment according to a new protocol and care as usual. Quality of life was measured and valued by proxies using a general quality-of-life instrument (EQ-5D). We considered medical cost and non-medical cost (e.g. remedial teaching). The model computed cost per successful treatment and cost per quality adjusted life year (QALY) in time. About 75% of the total costs was related to diagnostic tests to distinguish between children with severe dyslexia and children who have reading difficulties for other reasons. The costs per successful treatment of severe dyslexia were €36 366. Successful treatment showed a quality-of-life gain of about 11%. At primary school, the average cost per QALY for severe dyslexia amounted to €58 647. In the long term, the cost per QALY decreased to €26 386 at secondary school and €17 663 thereafter. The results of this study provide evidence that treatment of severe dyslexia is cost-effective when the investigated protocol is followed. Copyright © 2011 John Wiley & Sons, Ltd.

Challenges in assessing food environments in northern and remote communities in Canada.

PubMed

Skinner, Kelly; Burnett, Kristin; Williams, Patricia; Martin, Debbie; Stothart, Christopher; LeBlanc, Joseph; Veeraraghavan, Gigi; Sheedy, Amanda

2016-06-09

Effective tools for retail food environments in northern and remote communities are lacking. This paper examines the challenges of conducting food environment assessments in northern and remote communities in Canada encountered during our experience with a food costing project. One of the goals of the Paying for Nutrition in the North project is to develop guidelines to improve current food costing tools for northern Canada. Paying for Nutrition illustrates the complex context of measuring food environments in northern and remote communities. Through the development of a food costing methodology guide to assess northern food environments, several contextual issues emerged, including retail store oligopolies in communities; the importance of assessing food quality; informal social food economies; and the challenge of costing the acquisition and consumption of land- and water-based foods. Food environment measures designed for northern and remote communities need to reflect the geographic context in which they are being employed and must include input from local residents.

Cost minimizing of cutting process for CNC thermal and water-jet machines

NASA Astrophysics Data System (ADS)

Tavaeva, Anastasia; Kurennov, Dmitry

2015-11-01

This paper deals with optimization problem of cutting process for CNC thermal and water-jet machines. The accuracy of objective function parameters calculation for optimization problem is investigated. This paper shows that working tool path speed is not constant value. One depends on some parameters that are described in this paper. The relations of working tool path speed depending on the numbers of NC programs frames, length of straight cut, configuration part are presented. Based on received results the correction coefficients for working tool speed are defined. Additionally the optimization problem may be solved by using mathematical model. Model takes into account the additional restrictions of thermal cutting (choice of piercing and output tool point, precedence condition, thermal deformations). At the second part of paper the non-standard cutting techniques are considered. Ones may lead to minimizing of cutting cost and time compared with standard cutting techniques. This paper considers the effectiveness of non-standard cutting techniques application. At the end of the paper the future research works are indicated.

VirSSPA- a virtual reality tool for surgical planning workflow.

PubMed

Suárez, C; Acha, B; Serrano, C; Parra, C; Gómez, T

2009-03-01

A virtual reality tool, called VirSSPA, was developed to optimize the planning of surgical processes. Segmentation algorithms for Computed Tomography (CT) images: a region growing procedure was used for soft tissues and a thresholding algorithm was implemented to segment bones. The algorithms operate semiautomati- cally since they only need seed selection with the mouse on each tissue segmented by the user. The novelty of the paper is the adaptation of an enhancement method based on histogram thresholding applied to CT images for surgical planning, which simplifies subsequent segmentation. A substantial improvement of the virtual reality tool VirSSPA was obtained with these algorithms. VirSSPA was used to optimize surgical planning, to decrease the time spent on surgical planning and to improve operative results. The success rate increases due to surgeons being able to see the exact extent of the patient's ailment. This tool can decrease operating room time, thus resulting in reduced costs. Virtual simulation was effective for optimizing surgical planning, which could, consequently, result in improved outcomes with reduced costs.

Information quality-control model

NASA Technical Reports Server (NTRS)

Vincent, D. A.

1971-01-01

Model serves as graphic tool for estimating complete product objectives from limited input information, and is applied to cost estimations, product-quality evaluations, and effectiveness measurements for manpower resources allocation. Six product quality levels are defined.

On the use of high-frequency SCADA data for improved wind turbine performance monitoring

NASA Astrophysics Data System (ADS)

Gonzalez, E.; Stephen, B.; Infield, D.; Melero, J. J.

2017-11-01

SCADA-based condition monitoring of wind turbines facilitates the move from costly corrective repairs towards more proactive maintenance strategies. In this work, we advocate the use of high-frequency SCADA data and quantile regression to build a cost effective performance monitoring tool. The benefits of the approach are demonstrated through the comparison between state-of-the-art deterministic power curve modelling techniques and the suggested probabilistic model. Detection capabilities are compared for low and high-frequency SCADA data, providing evidence for monitoring at higher resolutions. Operational data from healthy and faulty turbines are used to provide a practical example of usage with the proposed tool, effectively achieving the detection of an incipient gearbox malfunction at a time horizon of more than one month prior to the actual occurrence of the failure.

Does drug price-regulation affect healthcare expenditures?

PubMed

Ben-Aharon, Omer; Shavit, Oren; Magnezi, Racheli

2017-09-01

Increasing health costs in developed countries are a major concern for decision makers. A variety of cost containment tools are used to control this trend, including maximum price regulation and reimbursement methods for health technologies. Information regarding expenditure-related outcomes of these tools is not available. To evaluate the association between different cost-regulating mechanisms and national health expenditures in selected countries. Price-regulating and reimbursement mechanisms for prescription drugs among OECD countries were reviewed. National health expenditure indices for 2008-2012 were extracted from OECD statistical sources. Possible associations between characteristics of different systems for regulation of drug prices and reimbursement and health expenditures were examined. In most countries, reimbursement mechanisms are part of publicly financed plans. Maximum price regulation is composed of reference-pricing, either of the same drug in other countries, or of therapeutic alternatives within the country, as well as value-based pricing (VBP). No association was found between price regulation or reimbursement mechanisms and healthcare costs. However, VBP may present a more effective mechanism, leading to reduced costs in the long term. Maximum price and reimbursement mechanism regulations were not found to be associated with cost containment of national health expenditures. VBP may have the potential to do so over the long term.

Demonstration of Cost-Effective, High-Performance Computing at Performance and Reliability Levels Equivalent to a 1994 Vector Supercomputer

NASA Technical Reports Server (NTRS)

Babrauckas, Theresa

2000-01-01

The Affordable High Performance Computing (AHPC) project demonstrated that high-performance computing based on a distributed network of computer workstations is a cost-effective alternative to vector supercomputers for running CPU and memory intensive design and analysis tools. The AHPC project created an integrated system called a Network Supercomputer. By connecting computer work-stations through a network and utilizing the workstations when they are idle, the resulting distributed-workstation environment has the same performance and reliability levels as the Cray C90 vector Supercomputer at less than 25 percent of the C90 cost. In fact, the cost comparison between a Cray C90 Supercomputer and Sun workstations showed that the number of distributed networked workstations equivalent to a C90 costs approximately 8 percent of the C90.

Research Costs Investigated: A Study Into the Budgets of Dutch Publicly Funded Drug-Related Research.

PubMed

van Asselt, Thea; Ramaekers, Bram; Corro Ramos, Isaac; Joore, Manuela; Al, Maiwenn; Lesman-Leegte, Ivonne; Postma, Maarten; Vemer, Pepijn; Feenstra, Talitha

2018-01-01

The costs of performing research are an important input in value of information (VOI) analyses but are difficult to assess. The aim of this study was to investigate the costs of research, serving two purposes: (1) estimating research costs for use in VOI analyses; and (2) developing a costing tool to support reviewers of grant proposals in assessing whether the proposed budget is realistic. For granted study proposals from the Netherlands Organization for Health Research and Development (ZonMw), type of study, potential cost drivers, proposed budget, and general characteristics were extracted. Regression analysis was conducted in an attempt to generate a 'predicted budget' for certain combinations of cost drivers, for implementation in the costing tool. Of 133 drug-related research grant proposals, 74 were included for complete data extraction. Because an association between cost drivers and budgets was not confirmed, we could not generate a predicted budget based on regression analysis, but only historic reference budgets given certain study characteristics. The costing tool was designed accordingly, i.e. with given selection criteria the tool returns the range of budgets in comparable studies. This range can be used in VOI analysis to estimate whether the expected net benefit of sampling will be positive to decide upon the net value of future research. The absence of association between study characteristics and budgets may indicate inconsistencies in the budgeting or granting process. Nonetheless, the tool generates useful information on historical budgets, and the option to formally relate VOI to budgets. To our knowledge, this is the first attempt at creating such a tool, which can be complemented with new studies being granted, enlarging the underlying database and keeping estimates up to date.

Advances in management of low-risk febrile neutropenia.

PubMed

Teuffel, Oliver; Sung, Lillian

2012-02-01

To describe and discuss the most recent advances in the management of low-risk febrile neutropenia in children with cancer. Several risk stratification tools for children with febrile neutropenia have been developed, although none of these tools have been directly compared and few have been validated in independent populations. However, there is good evidence that, for pediatric patients with febrile neutropenia at low risk for severe infection, outpatient management is a well tolerated and efficacious alternative to inpatient care. Moreover, major progress has been made in obtaining and understanding perceived quality of life and preferences for outpatient management in pediatric cancer patients. Many parents prefer inpatient management although child quality of life is, in general, anticipated to be higher with outpatient intravenous therapy. Finally, outpatient strategies are more cost-effective as compared with traditional management in hospital. Outpatient management is a well tolerated and cost-effective strategy for low-risk febrile neutropenia in children with cancer, although parental preferences are highly variable for outpatient versus inpatient management. Future research should examine the effectiveness of outpatient strategies through conduct of large cohort studies. Other future work could focus on development of decision aids and other tools to facilitate ambulatory approaches.

Chapter 6 - Lichen species to bioindicate air quality in Eastern United States from elemental composition: lessons from the Midwest

Treesearch

Susan Will-Wolf; Sarah Jovan; Michael C. Amacher

2018-01-01

Elemental concentration in lichens is a popular and cost-effective tool to bioindicate pollution load at plots (Donovan and others2016, Paoli and others 2014, Root and others 2015) and to complement costly instrumented monitoring to help assess environmental health. From recent development of lichen elemental bioindicators for air pollution in the U.S....

Sequential Tool Use in Great Apes

PubMed Central

Martin-Ordas, Gema; Schumacher, Lena; Call, Josep

2012-01-01

Sequential tool use is defined as using a tool to obtain another non-food object which subsequently itself will serve as a tool to act upon a further (sub)goal. Previous studies have shown that birds and great apes succeed in such tasks. However, the inclusion of a training phase for each of the sequential steps and the low cost associated with retrieving the longest tools limits the scope of the conclusions. The goal of the experiments presented here was, first to replicate a previous study on sequential tool use conducted on New Caledonian crows and, second, extend this work by increasing the cost of retrieving a tool in order to test tool selectivity of apes. In Experiment 1, we presented chimpanzees, orangutans and bonobos with an out-of-reach reward, two tools that were available but too short to reach the food and four out-of-reach tools differing in functionality. Similar to crows, apes spontaneously used up to 3 tools in sequence to get the reward and also showed a strong preference for the longest out-of reach tool independently of the distance of the food. In Experiment 2, we increased the cost of reaching for the longest out-of reach tool. Now apes used up to 5 tools in sequence to get the reward and became more selective in their choice of the longest tool as the costs of its retrieval increased. The findings of the studies presented here contribute to the growing body of comparative research on tool use. PMID:23300592

Structural interventions to prevent HIV/sexually transmitted disease: are they cost-effective for women in the southern United States?

PubMed

Cohen, Deborah A; Wu, Shin-Yi; Farley, Thomas A

2006-07-01

Structural interventions are theoretically promising for populations with a low prevalence of HIV, because they can reach large numbers of people to influence their social norms and collective risky behaviors for a relatively low cost per person. Because HIV transmission is continuing to increase among women in the southern United States, interventions to stem this epidemic are particularly warranted. This study explores whether structural interventions may be a cost-effective way to prevent HIV in this population. We used the cost-effectiveness estimator, "Maximizing the Benefit" to determine the relative cost-effectiveness of 6 structural HIV prevention interventions. "Maximizing the Benefit" is a spreadsheet tool using mathematical models to estimate the cost per HIV infection prevented taking into account the epidemiologic contexts, behavioral change as a result of an intervention, and the costs of intervention. We applied estimates of HIV prevalence related to blacks in the southern United States. All the structural interventions were cost-effective compared with average lifetime treatment costs of HIV, but mass media, condom availability, and alcohol taxes theoretically prevented the largest numbers of HIV infections. Although the assumptions used in cost-effectiveness estimates have many limitations, they do allow for a relative comparison of different interventions and help to inform policy decisions related to the allocation of HIV prevention resources. Structural interventions hold the greatest promise in reducing HIV transmission among low-prevalence populations.

Optimal control of malaria: combining vector interventions and drug therapies.

PubMed

Khamis, Doran; El Mouden, Claire; Kura, Klodeta; Bonsall, Michael B

2018-04-24

The sterile insect technique and transgenic equivalents are considered promising tools for controlling vector-borne disease in an age of increasing insecticide and drug-resistance. Combining vector interventions with artemisinin-based therapies may achieve the twin goals of suppressing malaria endemicity while managing artemisinin resistance. While the cost-effectiveness of these controls has been investigated independently, their combined usage has not been dynamically optimized in response to ecological and epidemiological processes. An optimal control framework based on coupled models of mosquito population dynamics and malaria epidemiology is used to investigate the cost-effectiveness of combining vector control with drug therapies in homogeneous environments with and without vector migration. The costs of endemic malaria are weighed against the costs of administering artemisinin therapies and releasing modified mosquitoes using various cost structures. Larval density dependence is shown to reduce the cost-effectiveness of conventional sterile insect releases compared with transgenic mosquitoes with a late-acting lethal gene. Using drug treatments can reduce the critical vector control release ratio necessary to cause disease fadeout. Combining vector control and drug therapies is the most effective and efficient use of resources, and using optimized implementation strategies can substantially reduce costs.

Cost-effectiveness analysis of policy instruments for greenhouse gas emission mitigation in the agricultural sector.

PubMed

Bakam, Innocent; Balana, Bedru Babulo; Matthews, Robin

2012-12-15

Market-based policy instruments to reduce greenhouse gas (GHG) emissions are generally considered more appropriate than command and control tools. However, the omission of transaction costs from policy evaluations and decision-making processes may result in inefficiency in public resource allocation and sub-optimal policy choices and outcomes. This paper aims to assess the relative cost-effectiveness of market-based GHG mitigation policy instruments in the agricultural sector by incorporating transaction costs. Assuming that farmers' responses to mitigation policies are economically rationale, an individual-based model is developed to study the relative performances of an emission tax, a nitrogen fertilizer tax, and a carbon trading scheme using farm data from the Scottish farm account survey (FAS) and emissions and transaction cost data from literature metadata survey. Model simulations show that none of the three schemes could be considered the most cost effective in all circumstances. The cost effectiveness depends both on the tax rate and the amount of free permits allocated to farmers. However, the emissions trading scheme appears to outperform both other policies in realistic scenarios. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Clinical study using activity-based costing to assess cost-effectiveness of a wound management system utilizing modern dressings in comparison with traditional wound care].

PubMed

Ohura, Takehiko; Sanada, Hiromi; Mino, Yoshio

2004-01-01

In recent years, the concept of cost-effectiveness, including medical delivery and health service fee systems, has become widespread in Japanese health care. In the field of pressure ulcer management, the recent introduction of penalty subtraction in the care fee system emphasizes the need for prevention and cost-effective care of pressure ulcer. Previous cost-effectiveness research on pressure ulcer management tended to focus only on "hardware" costs such as those for pharmaceuticals and medical supplies, while neglecting other cost aspects, particularly those involving the cost of labor. Thus, cost-effectiveness in pressure ulcer care has not yet been fully established. To provide true cost effectiveness data, a comparative prospective study was initiated in patients with stage II and III pressure ulcers. Considering the potential impact of the pressure reduction mattress on clinical outcome, in particular, the same type of pressure reduction mattresses are utilized in all the cases in the study. The cost analysis method used was Activity-Based Costing, which measures material and labor cost aspects on a daily basis. A reduction in the Pressure Sore Status Tool (PSST) score was used to measure clinical effectiveness. Patients were divided into three groups based on the treatment method and on the use of a consistent algorithm of wound care: 1. MC/A group, modern dressings with a treatment algorithm (control cohort). 2. TC/A group, traditional care (ointment and gauze) with a treatment algorithm. 3. TC/NA group, traditional care (ointment and gauze) without a treatment algorithm. The results revealed that MC/A is more cost-effective than both TC/A and TC/NA. This suggests that appropriate utilization of modern dressing materials and a pressure ulcer care algorithm would contribute to reducing health care costs, improved clinical results, and, ultimately, greater cost-effectiveness.

Development of nonlinear acoustic propagation analysis tool toward realization of loud noise environment prediction in aeronautics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kanamori, Masashi, E-mail: kanamori.masashi@jaxa.jp; Takahashi, Takashi, E-mail: takahashi.takashi@jaxa.jp; Aoyama, Takashi, E-mail: aoyama.takashi@jaxa.jp

2015-10-28

Shown in this paper is an introduction of a prediction tool for the propagation of loud noise with the application to the aeronautics in mind. The tool, named SPnoise, is based on HOWARD approach, which can express almost exact multidimensionality of the diffraction effect at the cost of back scattering. This paper argues, in particular, the prediction of the effect of atmospheric turbulence on sonic boom as one of the important issues in aeronautics. Thanks to the simple and efficient modeling of the atmospheric turbulence, SPnoise successfully re-creates the feature of the effect, which often emerges in the region justmore » behind the front and rear shock waves in the sonic boom signature.« less

Demystifying Results-Based Performance Measurement.

ERIC Educational Resources Information Center

Jorjani, Hamid

Many evaluators are convinced that Results-based Performance Measurement (RBPM) is an effective tool to improve service delivery and cost effectiveness in both public and private sectors. Successful RBPM requires self-directed and cross-functional work teams and the supporting infrastructure to make it work. There are many misconceptions and…

Cost-effectiveness on a local level: whether and when to adopt a new technology.

PubMed

Woertman, Willem H; Van De Wetering, Gijs; Adang, Eddy M M

2014-04-01

Cost-effectiveness analysis has become a widely accepted tool for decision making in health care. The standard textbook cost-effectiveness analysis focuses on whether to make the switch from an old or common practice technology to an innovative technology, and in doing so, it takes a global perspective. In this article, we are interested in a local perspective, and we look at the questions of whether and when the switch from old to new should be made. A new approach to cost-effectiveness from a local (e.g., a hospital) perspective, by means of a mathematical model for cost-effectiveness that explicitly incorporates time, is proposed. A decision rule is derived for establishing whether a new technology should be adopted, as well as a general rule for establishing when it pays to postpone adoption by 1 more period, and a set of decision rules that can be used to determine the optimal timing of adoption. Finally, a simple example is presented to illustrate our model and how it leads to optimal decision making in a number of cases.

Kaiser Permanente implant registries benefit patient safety, quality improvement, cost-effectiveness.

PubMed

Paxton, Elizabeth W; Kiley, Mary-Lou; Love, Rebecca; Barber, Thomas C; Funahashi, Tadashi T; Inacio, Maria C S

2013-06-01

In response to the increased volume, risk, and cost of medical devices, in 2001 Kaiser Permanente (KP) developed implant registries to enhance patient safety and quality, and to evaluate cost-effectiveness. Using an integrated electronic health record system, administrative databases, and other institutional databases, orthopedic, cardiology, and vascular implant registries were developed in 2001, 2006, and 2011, respectively. These registries monitor patients, implants, clinical practices, and surgical outcomes for KP's 9 million members. Critical to registry success is surgeon leadership and engagement; each geographical region has a surgeon champion who provides feedback on registry initiatives and disseminates registry findings. The registries enhance patient safety by providing a variety of clinical decision tools such as risk calculators, quality reports, risk-adjusted medical center reports, summaries of surgeon data, and infection control reports to registry stakeholders. The registries are used to immediately identify patients with recalled devices, evaluate new and established device technology, and identify outlier implants. The registries contribute to cost-effectiveness initiatives through collaboration with sourcing and contracting groups and confirming adherence to device formulary guidelines. Research studies based on registry data have directly influenced clinical best practices. Registries are important tools to evaluate longitudinal device performance and safety, study the clinical indications for and outcomes of device implantation, respond promptly to recalls and advisories, and contribute to the overall high quality of care of our patients.

Can delivery systems use cost-effectiveness analysis to reduce healthcare costs and improve value?

PubMed

Savitz, Lucy A; Savitz, Samuel T

2016-01-01

Understanding costs and ensuring that we demonstrate value in healthcare is a foundational presumption as we transform the way we deliver and pay for healthcare in the U.S. With a focus on population health and payment reforms underway, there is increased pressure to examine cost-effectiveness in healthcare delivery. Cost-effectiveness analysis (CEA) is a type of economic analysis comparing the costs and effects (i.e. health outcomes) of two or more treatment options. The result is expressed as a ratio where the denominator is the gain in health from a measure (e.g. years of life or quality-adjusted years of life) and the numerator is the incremental cost associated with that health gain. For higher cost interventions, the lower the ratio of costs to effects, the higher the value. While CEA is not new, the approach continues to be refined with enhanced statistical techniques and standardized methods. This article describes the CEA approach and also contrasts it to optional approaches, in order for readers to fully appreciate caveats and concerns. CEA as an economic evaluation tool can be easily misused owing to inappropriate assumptions, over reliance, and misapplication. Twelve issues to be considered in using CEA results to drive healthcare delivery decision-making are summarized. Appropriately recognizing both the strengths and the limitations of CEA is necessary for informed resource allocation in achieving the maximum value for healthcare services provided.

The potential of imaging techniques as a screening tool for colorectal cancer: a cost-effectiveness analysis.

PubMed

Greuter, Marjolein J E; Berkhof, Johannes; Fijneman, Remond J A; Demirel, Erhan; Lew, Jie-Bin; Meijer, Gerrit A; Stoker, Jaap; Coupé, Veerle M H

2016-07-01

Imaging may be promising for colorectal cancer (CRC) screening, since it has test characteristics comparable with colonoscopy but is less invasive. We aimed to assess the potential of CT colonography (CTC) and MR colonography (MRC) in terms of (cost-effectiveness) using the Adenoma and Serrated pathway to Colorectal CAncer model. We compared several CTC and MRC strategies with 5- or 10-yearly screening intervals with no screening, 10-yearly colonoscopy screening and biennial faecal immunochemical test (FIT) screening. We assumed trial-based participation rates in the base-case analyses and varied the rates in sensitivity analyses. Incremental lifetime costs and health effects were estimated from a healthcare perspective. The health gain of CTC and MRC was similar and ranged from 0.031 to 0.048 life-year gained compared with no screening, for 2-5 screening rounds. Lifetime costs per person for MRC strategies were €60-110 higher than those for CTC strategies with an equal number of screening rounds. All imaging-based strategies were cost-effective compared with no screening. FIT screening was the dominant screening strategy, leading to most LYG and highest cost-savings. Compared with three rounds of colonoscopy screening, CTC with five rounds was found to be cost-effective in an incremental analysis of imaging strategies. Assumptions on screening participation have a major influence on the ordering of strategies in terms of costs and effects. CTC and MRC have potential for CRC screening, compared with no screening and compared with three rounds of 10-yearly colonoscopy screening. When taking FIT screening as the reference, imaging is not cost-effective. Participation is an important driver of effectiveness and cost estimates. This is the first study to assess the cost-effectiveness of MRC screening for CRC.

Case-mix tool, costs and effectiveness in improving primary care mental health and substance abuse services.

PubMed

Riihimäki, Kirsi; Heiska-Johansson, Ainomaija; Ketola, Eeva

2018-02-01

Despite its importance in improving care and developing services, high-quality data evaluating cost-effectiveness and services in different case-mix populations is scarce in primary care. The objective was to investigate the service use of those mental health and substance abuse patients, who use lots of services. Primary health care diagnosis-related groups (pDRG) is a tool to evaluate service provider system and improve efficiency, productivity and quality. We viewed all pDRG results available from the year 2015 concerning municipal mental health and substance abuse services. In primary care mental health and substance abuse services, the most common ICD-10-codes were depression and substance abuse. One-fifth of patients produced 57% of costs. Their medium of appointments was 16 per year versus 6 per year of all patients. Only 54% of their diagnoses were recorded in the electronic health records versus 75% of all patients. They made 5.7 different pDRG episodes, including 1.8 episodes of depression, per patient. The average episode cost for this patient group was 301€. pDRG makes health care production transparent also in mental health and substance abuse services. It is easy to identify patients, who use a lot of services and thus induce the majority of costs, and focus on their needs in managing and developing services.

Using an ecosystem service decision support tool to support ridge to reef management: An example of sediment reduction in west Maui, Hawaii

NASA Astrophysics Data System (ADS)

Falinski, K. A.; Oleson, K.; Htun, H.; Kappel, C.; Lecky, J.; Rowe, C.; Selkoe, K.; White, C.

2016-12-01

Faced with anthropogenic stressors and declining coral reef states, managers concerned with restoration and resilience of coral reefs are increasingly recognizing the need to take a ridge-to-reef, ecosystem-based approach. An ecosystem services framing can help managers move towards these goals, helping to illustrate trade-offs and opportunities of management actions in terms of their impacts on society. We describe a research program building a spatial ecosystem services-based decision-support tool, and being applied to guide ridge-to-reef management in a NOAA priority site in West Maui. We use multiple modeling methods to link biophysical processes to ecosystem services and their spatial flows and social values in an integrating platform. Modeled services include water availability, sediment retention, nutrient retention and carbon sequestration on land. A coral reef ecosystem service model is under development to capture the linkages between terrestrial and coastal ecosystem services. Valuation studies are underway to quantify the implications for human well-being. The tool integrates techniques from decision science to facilitate decision making. We use the sediment retention model to illustrate the types of analyses the tool can support. The case study explores the tradeoffs between road rehabilitation costs and sediment export avoided. We couple the sediment and cost models with trade-off analysis to identify optimal distributed solutions that are most cost-effective in reducing erosion, and then use those models to estimate sediment exposure to coral reefs. We find that cooperation between land owners reveals opportunities for maximizing the benefits of fixing roads and minimizes costs. This research forms the building blocks of an ecosystem service decision support tool that we intend to continue to test and apply in other Pacific Island settings.

NASA SensorWeb and OGC Standards for Disaster Management

NASA Technical Reports Server (NTRS)

Mandl, Dan

2010-01-01

I. Goal: Enable user to cost-effectively find and create customized data products to help manage disasters; a) On-demand; b) Low cost and non-specialized tools such as Google Earth and browsers; c) Access via open network but with sufficient security. II. Use standards to interface various sensors and resultant data: a) Wrap sensors in Open Geospatial Consortium (OGC) standards; b) Wrap data processing algorithms and servers with OGC standards c) Use standardized workflows to orchestrate and script the creation of these data; products. III. Target Web 2.0 mass market: a) Make it simple and easy to use; b) Leverage new capabilities and tools that are emerging; c) Improve speed and responsiveness.

Friction Stir Spot Welding of Advanced High Strength Steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hovanski, Yuri; Grant, Glenn J.; Santella, M. L.

Friction stir spot welding techniques were developed to successfully join several advanced high strength steels. Two distinct tool materials were evaluated to determine the effect of tool materials on the process parameters and joint properties. Welds were characterized primarily via lap shear, microhardness, and optical microscopy. Friction stir spot welds were compared to the resistance spot welds in similar strength alloys by using the AWS standard for resistance spot welding high strength steels. As further comparison, a primitive cost comparison between the two joining processes was developed, which included an evaluation of the future cost prospects of friction stir spotmore » welding in advanced high strength steels.« less

The New Meteor Radar at Penn State: Design and First Observations

NASA Technical Reports Server (NTRS)

Urbina, J.; Seal, R.; Dyrud, L.

2011-01-01

In an effort to provide new and improved meteor radar sensing capabilities, Penn State has been developing advanced instruments and technologies for future meteor radars, with primary objectives of making such instruments more capable and more cost effective in order to study the basic properties of the global meteor flux, such as average mass, velocity, and chemical composition. Using low-cost field programmable gate arrays (FPGAs), combined with open source software tools, we describe a design methodology enabling one to develop state-of-the art radar instrumentation, by developing a generalized instrumentation core that can be customized using specialized output stage hardware. Furthermore, using object-oriented programming (OOP) techniques and open-source tools, we illustrate a technique to provide a cost-effective, generalized software framework to uniquely define an instrument s functionality through a customizable interface, implemented by the designer. The new instrument is intended to provide instantaneous profiles of atmospheric parameters and climatology on a daily basis throughout the year. An overview of the instrument design concepts and some of the emerging technologies developed for this meteor radar are presented.

Using Cloud-based Storage Technologies for Earth Science Data

NASA Astrophysics Data System (ADS)

Michaelis, A.; Readey, J.; Votava, P.

2016-12-01

Cloud based infrastructure may offer several key benefits of scalability, built in redundancy and reduced total cost of ownership as compared with a traditional data center approach. However, most of the tools and software systems developed for NASA data repositories were not developed with a cloud based infrastructure in mind and do not fully take advantage of commonly available cloud-based technologies. Object storage services are provided through all the leading public (Amazon Web Service, Microsoft Azure, Google Cloud, etc.) and private (Open Stack) clouds, and may provide a more cost-effective means of storing large data collections online. We describe a system that utilizes object storage rather than traditional file system based storage to vend earth science data. The system described is not only cost effective, but shows superior performance for running many different analytics tasks in the cloud. To enable compatibility with existing tools and applications, we outline client libraries that are API compatible with existing libraries for HDF5 and NetCDF4. Performance of the system is demonstrated using clouds services running on Amazon Web Services.

Chimera grids in the simulation of three-dimensional flowfields in turbine-blade-coolant passages

NASA Technical Reports Server (NTRS)

Stephens, M. A.; Rimlinger, M. J.; Shih, T. I.-P.; Civinskas, K. C.

1993-01-01

When computing flows inside geometrically complex turbine-blade coolant passages, the structure of the grid system used can affect significantly the overall time and cost required to obtain solutions. This paper addresses this issue while evaluating and developing computational tools for the design and analysis of coolant-passages, and is divided into two parts. In the first part, the various types of structured and unstructured grids are compared in relation to their ability to provide solutions in a timely and cost-effective manner. This comparison shows that the overlapping structured grids, known as Chimera grids, can rival and in some instances exceed the cost-effectiveness of unstructured grids in terms of both the man hours needed to generate grids and the amount of computer memory and CPU time needed to obtain solutions. In the second part, a computational tool utilizing Chimera grids was used to compute the flow and heat transfer in two different turbine-blade coolant passages that contain baffles and numerous pin fins. These computations showed the versatility and flexibility offered by Chimera grids.

Biological effects-based tools for monitoring impacted surface waters in the Great Lakes: a multiagency program in support of the Great Lakes Restoration Initiative

USGS Publications Warehouse

Ekman, Drew R.; Ankley, Gerald T.; Blazer, Vicki; Collette, Timothy W.; Garcia-Reyero, Natàlia; Iwanowicz, Luke R.; Jorgensen, Zachary G.; Lee, Kathy E.; Mazik, Pat M.; Miller, David H.; Perkins, Edward J.; Smith, Edwin T.; Tietge, Joseph E.; Villeneuve, Daniel L.

2013-01-01

There is increasing demand for the implementation of effects-based monitoring and surveillance (EBMS) approaches in the Great Lakes Basin to complement traditional chemical monitoring. Herein, we describe an ongoing multiagency effort to develop and implement EBMS tools, particularly with regard to monitoring potentially toxic chemicals and assessing Areas of Concern (AOCs), as envisioned by the Great Lakes Restoration Initiative (GLRI). Our strategy includes use of both targeted and open-ended/discovery techniques, as appropriate to the amount of information available, to guide a priori end point and/or assay selection. Specifically, a combination of in vivo and in vitro tools is employed by using both wild and caged fish (in vivo), and a variety of receptor- and cell-based assays (in vitro). We employ a work flow that progressively emphasizes in vitro tools for long-term or high-intensity monitoring because of their greater practicality (e.g., lower cost, labor) and relying on in vivo assays for initial surveillance and verification. Our strategy takes advantage of the strengths of a diversity of tools, balancing the depth, breadth, and specificity of information they provide against their costs, transferability, and practicality. Finally, a series of illustrative scenarios is examined that align EBMS options with management goals to illustrate the adaptability and scaling of EBMS approaches and how they can be used in management decisions.

Cost-Effective CNC Part Program Verification Development for Laboratory Instruction.

ERIC Educational Resources Information Center

Chen, Joseph C.; Chang, Ted C.

2000-01-01

Describes a computer numerical control program verification system that checks a part program before its execution. The system includes character recognition, word recognition, a fuzzy-nets system, and a tool path viewer. (SK)

Facilitating Sound, Cost-Effective Federal Energy Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

FEMP

2016-07-01

Fact sheet offers an overview of the Federal Energy Management Program (FEMP), which provides agencies and organizations with the information, tools, and assistance they need to achieve their energy-related requirements and goals through specialized initiatives.

Heat-Affected Zone Studies Of Thermally Cut Structural Steels

DOT National Transportation Integrated Search

1999-12-01

According to this primer, asset management is a systematic process of maintaining, upgrading, and operating physical assets cost-effectively. It combines engineering principles with sound business practices and economic theory, and it provides tools ...

Kinect, a Novel Cutting Edge Tool in Pavement Data Collection

NASA Astrophysics Data System (ADS)

Mahmoudzadeh, A.; Firoozi Yeganeh, S.; Golroo, A.

2015-12-01

Pavement roughness and surface distress detection is of interest of decision makers due to vehicle safety, user satisfaction, and cost saving. Data collection, as a core of pavement management systems, is required for these detections. There are two major types of data collection: traditional/manual data collection and automated/semi-automated data collection. This paper study different non-destructive tools in detecting cracks and potholes. For this purpose, automated data collection tools, which have been utilized recently are discussed and their applications are criticized. The main issue is the significant amount of money as a capital investment needed to buy the vehicle. The main scope of this paper is to study the approach and related tools that not only are cost-effective but also precise and accurate. The new sensor called Kinect has all of these specifications. It can capture both RGB images and depth which are of significant use in measuring cracks and potholes. This sensor is able to take image of surfaces with adequate resolution to detect cracks along with measurement of distance between sensor and obstacles in front of it which results in depth of defects. This technology has been very recently studied by few researchers in different fields of studies such as project management, biomedical engineering, etc. Pavement management has not paid enough attention to use of Kinect in monitoring and detecting distresses. This paper is aimed at providing a thorough literature review on usage of Kinect in pavement management and finally proposing the best approach which is cost-effective and precise.

Scattering effects of machined optical surfaces

NASA Astrophysics Data System (ADS)

Thompson, Anita Kotha

1998-09-01

Optical fabrication is one of the most labor-intensive industries in existence. Lensmakers use pitch to affix glass blanks to metal chucks that hold the glass as they grind it with tools that have not changed much in fifty years. Recent demands placed on traditional optical fabrication processes in terms of surface accuracy, smoothnesses, and cost effectiveness has resulted in the exploitation of precision machining technology to develop a new generation of computer numerically controlled (CNC) optical fabrication equipment. This new kind of precision machining process is called deterministic microgrinding. The most conspicuous feature of optical surfaces manufactured by the precision machining processes (such as single-point diamond turning or deterministic microgrinding) is the presence of residual cutting tool marks. These residual tool marks exhibit a highly structured topography of periodic azimuthal or radial deterministic marks in addition to random microroughness. These distinct topographic features give rise to surface scattering effects that can significantly degrade optical performance. In this dissertation project we investigate the scattering behavior of machined optical surfaces and their imaging characteristics. In particular, we will characterize the residual optical fabrication errors and relate the resulting scattering behavior to the tool and machine parameters in order to evaluate and improve the deterministic microgrinding process. Other desired information derived from the investigation of scattering behavior is the optical fabrication tolerances necessary to satisfy specific image quality requirements. Optical fabrication tolerances are a major cost driver for any precision optical manufacturing technology. The derivation and control of the optical fabrication tolerances necessary for different applications and operating wavelength regimes will play a unique and central role in establishing deterministic microgrinding as a preferred and a cost-effective optical fabrication process. Other well understood optical fabrication processes will also be reviewed and a performance comparison with the conventional grinding and polishing technique will be made to determine any inherent advantages in the optical quality of surfaces produced by other techniques.

Evaluation of the Ethiopian Millennium Rural Initiative: Impact on Mortality and Cost-Effectiveness

PubMed Central

Curry, Leslie A.; Byam, Patrick; Linnander, Erika; Andersson, Kyeen M.; Abebe, Yigeremu; Zerihun, Abraham; Thompson, Jennifer W.; Bradley, Elizabeth H.

2013-01-01

Main Objective Few studies have examined the long-term, impact of large-scale interventions to strengthen primary care services for women and children in rural, low-income settings. We evaluated the impact of the Ethiopian Millennium Rural Initiative (EMRI), an 18-month systems-based intervention to improve the performance of 30 primary health care units in rural areas of Ethiopia. Methods We assessed the impact of EMRI on maternal and child survival using The Lives Saved Tool (LiST), Demography (DemProj) and AIDS Impact Model (AIM) tools in Spectrum software, inputting monthly data on 6 indicators 1) antenatal coverage (ANC), 2) skilled birth attendance coverage (SBA), 3) post-natal coverage (PNC), 4) HIV testing during ANC, 5) measles vaccination coverage, and 6) pentavalent 3 vaccination coverages. We calculated a cost-benefit ratio of the EMRI program including lives saved during implementation and lives saved during implementation and 5 year follow-up. Results A total of 134 lives (all children) were estimated to have been saved due to the EMRI interventions during the 18-month intervention in 30 health centers and their catchment areas, with an estimated additional 852 lives (820 children and 2 adults) saved during the 5-year post-EMRI period. For the 18-month intervention period, EMRI cost $37,313 per life saved ($42,366 per life if evaluation costs are included). Calculated over the 18-month intervention plus 5 years post-intervention, EMRI cost $5,875 per life saved ($6,671 per life if evaluation costs are included). The cost effectiveness of EMRI improves substantially if the performance achieved during the 18 months of the EMRI intervention is sustained for 5 years. Scaling up EMRI to operate for 5 years across the 4 major regions of Ethiopia could save as many as 34,908 lives. Significance A systems-based approach to improving primary care in low-income settings can have transformational impact on lives saved and be cost-effective. PMID:24260307

Life cycle costing of food waste: A review of methodological approaches.

PubMed

De Menna, Fabio; Dietershagen, Jana; Loubiere, Marion; Vittuari, Matteo

2018-03-01

Food waste (FW) is a global problem that is receiving increasing attention due to its environmental and economic impacts. Appropriate FW prevention, valorization, and management routes could mitigate or avoid these effects. Life cycle thinking and approaches, such as life cycle costing (LCC), may represent suitable tools to assess the sustainability of these routes. This study analyzes different LCC methodological aspects and approaches to evaluate FW management and valorization routes. A systematic literature review was carried out with a focus on different LCC approaches, their application to food, FW, and waste systems, as well as on specific methodological aspects. The review consisted of three phases: a collection phase, an iterative phase with experts' consultation, and a final literature classification. Journal papers and reports were retrieved from selected databases and search engines. The standardization of LCC methodologies is still in its infancy due to a lack of consensus over definitions and approaches. Research on the life cycle cost of FW is limited and generally focused on FW management, rather than prevention or valorization of specific flows. FW prevention, valorization, and management require a consistent integration of LCC and Life Cycle Assessment (LCA) to avoid tradeoffs between environmental and economic impacts. This entails a proper investigation of methodological differences between attributional and consequential modelling in LCC, especially with regard to functional unit, system boundaries, multi-functionality, included cost, and assessed impacts. Further efforts could also aim at finding the most effective and transparent categorization of costs, in particular when dealing with multiple stakeholders sustaining costs of FW. Interpretation of results from LCC of FW should take into account the effect on larger economic systems. Additional key performance indicators and analytical tools could be included in consequential approaches. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Economic Evidence and Point-of-Care Testing

PubMed Central

St John, Andrew; Price, Christopher P

2013-01-01

Health economics has been an established feature of the research, policymaking, practice and management in the delivery of healthcare. However its role is increasing as the cost of healthcare begins to drive changes in most healthcare systems. Thus the output from cost effectiveness studies is now being taken into account when making reimbursement decisions, e.g. in Australia and the United Kingdom. Against this background it is also recognised that the health economic tools employed in healthcare, and particularly the output from the use of these tools however, are not always employed in the routine delivery of services. One of the notable consequences of this situation is the poor record of innovation in healthcare with respect to the adoption of new technologies, and the realisation of their benefits. The evidence base for the effectiveness of diagnostic services is well known to be limited, and one consequence of this has been a very limited literature on cost effectiveness. One reason for this situation is undoubtedly the reimbursement strategies employed in laboratory medicine for many years, simplistically based on the complexity of the test procedure, and the delivery as a cost-per-test service. This has proved a disincentive to generate the required evidence, and little effort to generate an integrated investment and disinvestment business case, associated with care pathway changes. Point-of-care testing creates a particularly challenging scenario because, on the one hand, the unit cost-per-test is larger through the loss of the economy of scale offered by automation, whilst it offers the potential of substantial savings through enabling rapid delivery of results, and reduction of facility costs. This is important when many health systems are planning for complete system redesign. We review the literature on economic assessment of point-of-care testing in the context of these developments. PMID:24151342

Cost-effective conservation of an endangered frog under uncertainty.

PubMed

Rose, Lucy E; Heard, Geoffrey W; Chee, Yung En; Wintle, Brendan A

2016-04-01

How should managers choose among conservation options when resources are scarce and there is uncertainty regarding the effectiveness of actions? Well-developed tools exist for prioritizing areas for one-time and binary actions (e.g., protect vs. not protect), but methods for prioritizing incremental or ongoing actions (such as habitat creation and maintenance) remain uncommon. We devised an approach that combines metapopulation viability and cost-effectiveness analyses to select among alternative conservation actions while accounting for uncertainty. In our study, cost-effectiveness is the ratio between the benefit of an action and its economic cost, where benefit is the change in metapopulation viability. We applied the approach to the case of the endangered growling grass frog (Litoria raniformis), which is threatened by urban development. We extended a Bayesian model to predict metapopulation viability under 9 urbanization and management scenarios and incorporated the full probability distribution of possible outcomes for each scenario into the cost-effectiveness analysis. This allowed us to discern between cost-effective alternatives that were robust to uncertainty and those with a relatively high risk of failure. We found a relatively high risk of extinction following urbanization if the only action was reservation of core habitat; habitat creation actions performed better than enhancement actions; and cost-effectiveness ranking changed depending on the consideration of uncertainty. Our results suggest that creation and maintenance of wetlands dedicated to L. raniformis is the only cost-effective action likely to result in a sufficiently low risk of extinction. To our knowledge we are the first study to use Bayesian metapopulation viability analysis to explicitly incorporate parametric and demographic uncertainty into a cost-effective evaluation of conservation actions. The approach offers guidance to decision makers aiming to achieve cost-effective conservation under uncertainty. © 2015 Society for Conservation Biology.

A Cost Simulation Tool for Estimating the Cost of Operating Government Owned and Operated Ships

DTIC Science & Technology

1994-09-01

Horngren , C.T., Foster, G., Datar, S.M., Cost Accounting : A Management Emphasis, Prentice-Hall, Englewood Cliffs, NJ, 1994 IBM Corporation, A Graphical...4. TITLE AND SUBTITLE A COST SIMULATION TOOL FOR 5. FUNDING NUMBERS ESTIMATING THE COST OF OPERATING GOVERNMENT OWNED AND OPERATED SHIPS 6. AUTHOR( S ...normally does not present a problem to the accounting department. The final category, the cost of operating the government owned and operated ships is

Alternative Fuels Data Center: Natural Gas Vehicles

Science.gov Websites

Publications | All Publications Tools Vehicle Cost Calculator Vehicle Search All Tools Vehicle Cost Calculator Choose a vehicle to compare fuel cost and emissions with a conventional vehicle. Select Fuel/Technology (LPG) Next Vehicle Cost Calculator Vehicle 0 City 0 Hwy (mi/gal) 0 City 0 Hwy (kWh/100m) Gasoline

Engineering Design Handbook. Breech Mechanism Design

DTIC Science & Technology

1979-02-01

4-22 4-11.2 Tool and Gage Requirements ...................................... 4-22 R eferences...16 4-5 Total Cost per Piece---Sum of Tool Costs, Machining Cost, and Nonproductive Cost ....................................................... 4-20 4...practical design limits are end of the gun tube from which the projectile numerous as well as stringent Today, the multi- emerges and the breecb end is that

Expert system verification and validation study. Delivery 3A and 3B: Trip summaries

NASA Technical Reports Server (NTRS)

French, Scott

1991-01-01

Key results are documented from attending the 4th workshop on verification, validation, and testing. The most interesting part of the workshop was when representatives from the U.S., Japan, and Europe presented surveys of VV&T within their respective regions. Another interesting part focused on current efforts to define industry standards for artificial intelligence and how that might affect approaches to VV&T of expert systems. The next part of the workshop focused on VV&T methods of applying mathematical techniques to verification of rule bases and techniques for capturing information relating to the process of developing software. The final part focused on software tools. A summary is also presented of the EPRI conference on 'Methodologies, Tools, and Standards for Cost Effective Reliable Software Verification and Validation. The conference was divided into discussion sessions on the following issues: development process, automated tools, software reliability, methods, standards, and cost/benefit considerations.

Desktop Publishing: Probable Effects on University Extension.

ERIC Educational Resources Information Center

Misanchuk, Earl R.

Desktop publishing (DTP) could potentially become a powerful, relatively inexpensive tool for use in university extension activities. This paper describes and explains the characteristics of DTP and examines its effects on university extension. In addition, it outlines the kind of hardware, software, and skills needed and costs; describes new…

Attitude: A Component of Competent Performance.

ERIC Educational Resources Information Center

Meussling, Vonne

The findings of a survey of attitude studies to determine the effect of students' attitudes on communication competence as they enter the work force and develop their careers are reported in this paper. The paper explains how attitude improvement is an effective management tool in controlling costly absenteeism, output, job productivity, work…

Cost-effectiveness of preoperative motor mapping with navigated transcranial magnetic brain stimulation in patients with high-grade glioma.

PubMed

Butenschön, Vicki M; Ille, Sebastian; Sollmann, Nico; Meyer, Bernhard; Krieg, Sandro M

2018-06-01

OBJECTIVE Navigated transcranial magnetic stimulation (nTMS) is used to identify the motor cortex prior to surgery. Yet, there has, until now, been no published evidence on the economic impact of nTMS. This study aims to analyze the cost-effectiveness of nTMS, evaluating the incremental costs of nTMS motor mapping per additional quality-adjusted life year (QALY). By doing so, this study also provides a model allowing for future analysis of general cost-effectiveness of new neuro-oncological treatment options. METHODS The authors used a microsimulation model based on their cohort population sampled for 1000 patients over the time horizon of 2 years. A health care provider perspective was used to assemble direct costs of total treatment. Transition probabilities and health utilities were based on published literature. Effects were stated in QALYs and established for health state subgroups. RESULTS In all scenarios, preoperative mapping was considered cost-effective with a willingness-to-pay threshold < 3*per capita GDP (gross domestic product). The incremental cost-effectiveness ratio (ICER) of nTMS versus no nTMS was 45,086 Euros/QALY. Sensitivity analyses showed robust results with a high impact of total treatment costs and utility of progression-free survival. Comparing the incremental costs caused by nTMS implementation only, the ICER decreased to 1967 Euros/QALY. CONCLUSIONS Motor mapping prior to surgery provides a cost-effective tool to improve the clinical outcome and overall survival of high-grade glioma patients in a resource-limited setting. Moreover, the model used in this study can be used in the future to analyze new treatment options in neuro-oncology in terms of their general cost-effectiveness.

Assessing value-for-money in maternal and newborn health.

PubMed

Banke-Thomas, Aduragbemi; Madaj, Barbara; Kumar, Shubha; Ameh, Charles; van den Broek, Nynke

2017-01-01

Responding to increasing demands to demonstrate value-for-money (VfM) for maternal and newborn health interventions, and in the absence of VfM analysis in peer-reviewed literature, this paper reviews VfM components and methods, critiques their applicability, strengths and weakness and proposes how VfM assessments can be improved. VfM comprises four components: economy, efficiency, effectiveness and cost-effectiveness. Both 'economy' and 'efficiency' can be assessed with detailed cost analysis utilising costs obtained from programme accounting data or generic cost databases. Before-and-after studies, case-control studies or randomised controlled trials can be used to assess 'effectiveness'. To assess 'cost-effectiveness', cost-effectiveness analysis (CEA), cost-utility analysis (CUA), cost-benefit analysis (CBA) or social return on investment (SROI) analysis are applicable. Generally, costs can be obtained from programme accounting data or existing generic cost databases. As such 'economy' and 'efficiency' are relatively easy to assess. However, 'effectiveness' and 'cost-effectiveness' which require establishment of the counterfactual are more difficult to ascertain. Either a combination of CEA or CUA with tools for assessing other VfM components, or the independent use of CBA or SROI are alternative approaches proposed to strengthen VfM assessments. Cross-cutting themes such as equity, sustainability, scalability and cultural acceptability should also be assessed, as they provide critical contextual information for interpreting VfM assessments. To select an assessment approach, consideration should be given to the purpose, data availability, stakeholders requiring the findings and perspectives of programme beneficiaries. Implementers and researchers should work together to improve the quality of assessments. Standardisation around definitions, methodology and effectiveness measures to be assessed would help.

Selecting cost-effective areas for restoration of ecosystem services.

PubMed

Adame, M F; Hermoso, V; Perhans, K; Lovelock, C E; Herrera-Silveira, J A

2015-04-01

Selection of areas for restoration should be based on cost-effectiveness analysis to attain the maximum benefit with a limited budget and overcome the traditional ad hoc allocation of funds for restoration projects. Restoration projects need to be planned on the basis of ecological knowledge and economic and social constraints. We devised a novel approach for selecting cost-effective areas for restoration on the basis of biodiversity and potential provision of 3 ecosystem services: carbon storage, water depuration, and coastal protection. We used Marxan, a spatial prioritization tool, to balance the provision of ecosystem services against the cost of restoration. We tested this approach in a mangrove ecosystem in the Caribbean. Our approach efficiently selected restoration areas that at low cost were compatible with biodiversity targets and that maximized the provision of one or more ecosystem services. Choosing areas for restoration of mangroves on the basis carbon storage potential, largely guaranteed the restoration of biodiversity and other ecosystem services. © 2014 Society for Conservation Biology.

Using hybrid expert system approaches for engineering applications

NASA Technical Reports Server (NTRS)

Allen, R. H.; Boarnet, M. G.; Culbert, C. J.; Savely, R. T.

1987-01-01

In this paper, the use of hybrid expert system shells and hybrid (i.e., algorithmic and heuristic) approaches for solving engineering problems is reported. Aspects of various engineering problem domains are reviewed for a number of examples with specific applications made to recently developed prototype expert systems. Based on this prototyping experience, critical evaluations of and comparisons between commercially available tools, and some research tools, in the United States and Australia, and their underlying problem-solving paradigms are made. Characteristics of the implementation tool and the engineering domain are compared and practical software engineering issues are discussed with respect to hybrid tools and approaches. Finally, guidelines are offered with the hope that expert system development will be less time consuming, more effective, and more cost-effective than it has been in the past.

Optimal design of green and grey stormwater infrastructure for small urban catchment based on life-cycle cost-effectiveness analysis

NASA Astrophysics Data System (ADS)

Yang, Y.; Chui, T. F. M.

2016-12-01

Green infrastructure (GI) is identified as sustainable and environmentally friendly alternatives to the conventional grey stormwater infrastructure. Commonly used GI (e.g. green roof, bioretention, porous pavement) can provide multifunctional benefits, e.g. mitigation of urban heat island effects, improvements in air quality. Therefore, to optimize the design of GI and grey drainage infrastructure, it is essential to account for their benefits together with the costs. In this study, a comprehensive simulation-optimization modelling framework that considers the economic and hydro-environmental aspects of GI and grey infrastructure for small urban catchment applications is developed. Several modelling tools (i.e., EPA SWMM model, the WERF BMP and LID Whole Life Cycle Cost Modelling Tools) and optimization solvers are coupled together to assess the life-cycle cost-effectiveness of GI and grey infrastructure, and to further develop optimal stormwater drainage solutions. A typical residential lot in New York City is examined as a case study. The life-cycle cost-effectiveness of various GI and grey infrastructure are first examined at different investment levels. The results together with the catchment parameters are then provided to the optimization solvers, to derive the optimal investment and contributing area of each type of the stormwater controls. The relationship between the investment and optimized environmental benefit is found to be nonlinear. The optimized drainage solutions demonstrate that grey infrastructure is preferred at low total investments while more GI should be adopted at high investments. The sensitivity of the optimized solutions to the prices the stormwater controls is evaluated and is found to be highly associated with their utilizations in the base optimization case. The overall simulation-optimization framework can be easily applied to other sites world-wide, and to be further developed into powerful decision support systems.

APPLYING INSIGHTS FROM BEHAVIORAL ECONOMICS TO POLICY DESIGN

PubMed Central

Madrian, Brigitte C.

2014-01-01

The premise of this article is that an understanding of psychology and other social science disciplines can inform the effectiveness of the economic tools traditionally deployed in carrying out the functions of government, which include remedying market failures, redistributing income, and collecting tax revenue. An understanding of psychology can also lead to the development of different policy tools that better motivate desired behavior change or that are more cost-effective than traditional policy tools. The article outlines a framework for thinking about the psychology of behavior change in the context of market failures. It then describes the research on the effects of a variety of interventions rooted in an understanding of psychology that have policy-relevant applications. The article concludes by discussing how an understanding of psychology can also inform the use and design of traditional policy tools for behavior change, such as financial incentives. PMID:25520759

Cost-effectiveness analysis of population-based screening of hepatocellular carcinoma: Comparing ultrasonography with two-stage screening

PubMed Central

Kuo, Ming-Jeng; Chen, Hsiu-Hsi; Chen, Chi-Ling; Fann, Jean Ching-Yuan; Chen, Sam Li-Sheng; Chiu, Sherry Yueh-Hsia; Lin, Yu-Min; Liao, Chao-Sheng; Chang, Hung-Chuen; Lin, Yueh-Shih; Yen, Amy Ming-Fang

2016-01-01

AIM: To assess the cost-effectiveness of two population-based hepatocellular carcinoma (HCC) screening programs, two-stage biomarker-ultrasound method and mass screening using abdominal ultrasonography (AUS). METHODS: In this study, we applied a Markov decision model with a societal perspective and a lifetime horizon for the general population-based cohorts in an area with high HCC incidence, such as Taiwan. The accuracy of biomarkers and ultrasonography was estimated from published meta-analyses. The costs of surveillance, diagnosis, and treatment were based on a combination of published literature, Medicare payments, and medical expenditure at the National Taiwan University Hospital. The main outcome measure was cost per life-year gained with a 3% annual discount rate. RESULTS: The results show that the mass screening using AUS was associated with an incremental cost-effectiveness ratio of USD39825 per life-year gained, whereas two-stage screening was associated with an incremental cost-effectiveness ratio of USD49733 per life-year gained, as compared with no screening. Screening programs with an initial screening age of 50 years old and biennial screening interval were the most cost-effective. These findings were sensitive to the costs of screening tools and the specificity of biomarker screening. CONCLUSION: Mass screening using AUS is more cost effective than two-stage biomarker-ultrasound screening. The most optimal strategy is an initial screening age at 50 years old with a 2-year inter-screening interval. PMID:27022228

Cost-Effectiveness of Monovalent Rotavirus Vaccination of Infants in Malawi: A Postintroduction Analysis Using Individual Patient–Level Costing Data

PubMed Central

Bar-Zeev, Naor; Tate, Jacqueline E.; Pecenka, Clint; Chikafa, Jean; Mvula, Hazzie; Wachepa, Richard; Mwansambo, Charles; Mhango, Themba; Chirwa, Geoffrey; Crampin, Amelia C.; Parashar, Umesh D.; Costello, Anthony; Heyderman, Robert S.; French, Neil; Atherly, Deborah; Cunliffe, Nigel A.

2016-01-01

Background. Rotavirus vaccination reduces childhood hospitalization in Africa, but cost-effectiveness has not been determined using real-world effectiveness and costing data. We sought to determine monovalent rotavirus vaccine cost-effectiveness in Malawi, one of Africa's poorest countries and the first Gavi-eligible country to report disease reduction following introduction in 2012. Methods. This was a prospective cohort study of children with acute gastroenteritis at a rural primary health center, a rural first referral–level hospital and an urban regional referral hospital in Malawi. For each participant we itemized household costs of illness and direct medical expenditures incurred. We also collected Ministry of Health vaccine implementation costs. Using a standard tool (TRIVAC), we derived cost-effectiveness. Results. Between 1 January 2013 and 21 November 2014, we recruited 530 children aged <5 years with gastroenteritis. Costs did not differ by rotavirus test result, but were significantly higher for admitted children and those with increased severity on Vesikari scale. Adding rotavirus vaccine to the national schedule costs Malawi $0.42 per dose in system costs. Vaccine copayment is an additional $0.20. Over 20 years, the vaccine program will avert 1 026 000 cases of rotavirus gastroenteritis, 78 000 inpatient admissions, 4300 deaths, and 136 000 disability-adjusted-life-years (DALYs). For this year's birth cohort, it will avert 54 000 cases of rotavirus and 281 deaths in children aged <5 years. The program will cost $10.5 million and save $8.0 million in averted healthcare costs. Societal cost per DALY averted was $10, and the cost per rotavirus case averted was $1. Conclusions. Gastroenteritis causes substantial economic burden to Malawi. The rotavirus vaccine program is highly cost-effective. Together with the demonstrated impact of rotavirus vaccine in reducing population hospitalization burden, its cost-effectiveness makes a strong argument for widespread utilization in other low-income, high-burden settings. PMID:27059360

Cost-Effectiveness of Monovalent Rotavirus Vaccination of Infants in Malawi: A Postintroduction Analysis Using Individual Patient-Level Costing Data.

PubMed

Bar-Zeev, Naor; Tate, Jacqueline E; Pecenka, Clint; Chikafa, Jean; Mvula, Hazzie; Wachepa, Richard; Mwansambo, Charles; Mhango, Themba; Chirwa, Geoffrey; Crampin, Amelia C; Parashar, Umesh D; Costello, Anthony; Heyderman, Robert S; French, Neil; Atherly, Deborah; Cunliffe, Nigel A

2016-05-01

Rotavirus vaccination reduces childhood hospitalization in Africa, but cost-effectiveness has not been determined using real-world effectiveness and costing data. We sought to determine monovalent rotavirus vaccine cost-effectiveness in Malawi, one of Africa's poorest countries and the first Gavi-eligible country to report disease reduction following introduction in 2012. This was a prospective cohort study of children with acute gastroenteritis at a rural primary health center, a rural first referral-level hospital and an urban regional referral hospital in Malawi. For each participant we itemized household costs of illness and direct medical expenditures incurred. We also collected Ministry of Health vaccine implementation costs. Using a standard tool (TRIVAC), we derived cost-effectiveness. Between 1 January 2013 and 21 November 2014, we recruited 530 children aged <5 years with gastroenteritis. Costs did not differ by rotavirus test result, but were significantly higher for admitted children and those with increased severity on Vesikari scale. Adding rotavirus vaccine to the national schedule costs Malawi $0.42 per dose in system costs. Vaccine copayment is an additional $0.20. Over 20 years, the vaccine program will avert 1 026 000 cases of rotavirus gastroenteritis, 78 000 inpatient admissions, 4300 deaths, and 136 000 disability-adjusted-life-years (DALYs). For this year's birth cohort, it will avert 54 000 cases of rotavirus and 281 deaths in children aged <5 years. The program will cost $10.5 million and save $8.0 million in averted healthcare costs. Societal cost per DALY averted was $10, and the cost per rotavirus case averted was $1. Gastroenteritis causes substantial economic burden to Malawi. The rotavirus vaccine program is highly cost-effective. Together with the demonstrated impact of rotavirus vaccine in reducing population hospitalization burden, its cost-effectiveness makes a strong argument for widespread utilization in other low-income, high-burden settings. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America.

How can activity-based costing methodology be performed as a powerful tool to calculate costs and secure appropriate patient care?

PubMed

Lin, Blossom Yen-Ju; Chao, Te-Hsin; Yao, Yuh; Tu, Shu-Min; Wu, Chun-Ching; Chern, Jin-Yuan; Chao, Shiu-Hsiung; Shaw, Keh-Yuong

2007-04-01

Previous studies have shown the advantages of using activity-based costing (ABC) methodology in the health care industry. The potential values of ABC methodology in health care are derived from the more accurate cost calculation compared to the traditional step-down costing, and the potentials to evaluate quality or effectiveness of health care based on health care activities. This project used ABC methodology to profile the cost structure of inpatients with surgical procedures at the Department of Colorectal Surgery in a public teaching hospital, and to identify the missing or inappropriate clinical procedures. We found that ABC methodology was able to accurately calculate costs and to identify several missing pre- and post-surgical nursing education activities in the course of treatment.

Adaptation of the Tool to Estimate Patient Costs Questionnaire into Indonesian Context for Tuberculosis-affected Households.

PubMed

Fuady, Ahmad; Houweling, Tanja A; Mansyur, Muchtaruddin; Richardus, Jan H

2018-01-01

Indonesia is the second-highest country for tuberculosis (TB) incidence worldwide. Hence, it urgently requires improvements and innovations beyond the strategies that are currently being implemented throughout the country. One fundamental step in monitoring its progress is by preparing a validated tool to measure total patient costs and catastrophic total costs. The World Health Organization (WHO) recommends using a version of the generic questionnaire that has been adapted to the local cultural context in order to interpret findings correctly. This study is aimed to adapt the Tool to Estimate Patient Costs questionnaire into the Indonesian context, which measures total costs and catastrophic total costs for tuberculosis-affected households. the tool was adapted using best-practice guidelines. On the basis of a pre-test performed in a previous study (referred to as Phase 1 Study), we refined the adaptation process by comparing it with the generic tool introduced by the WHO. We also held an expert committee review and performed pre-testing by interviewing 30 TB patients. After pre-testing, the tool was provided with complete explanation sheets for finalization. seventy-two major changes were made during the adaptation process including changing the answer choices to match the Indonesian context, refining the flow of questions, deleting questions, changing some words and restoring original questions that had been changed in Phase 1 Study. Participants indicated that most questions were clear and easy to understand. To address recall difficulties by the participants, we made some adaptations to obtain data that might be missing, such as tracking data to medical records, developing a proxy of costs and guiding interviewers to ask for a specific value when participants were uncertain about the estimated market value of property they had sold. the adapted Tool to Estimate Patient Costs in Bahasa Indonesia is comprehensive and ready for use in future studies on TB-related catastrophic costs and is suitable for monitoring progress to achieve the target of the End TB Strategy.

A Cost Analysis of a Community Health Worker Program in Rural Vermont

PubMed Central

Wang, Guijing; Ruggles, Laural; Dunet, Diane O.

2015-01-01

Studies have shown that community health workers (CHWs) can improve the effectiveness of health care systems; however, little has been reported about CHW program costs. We examined the costs of a program staffed by three CHWs associated with a small, rural hospital in Vermont. We used a standardized data collection tool to compile cost information from administrative data and personal interviews. We analyzed personnel and operational costs from October 2010 to September 2011. The estimated total program cost was $420,348, a figure comprised of $281,063 (67 %) for personnel and $139,285 (33 %) for operations. CHW salaries and office space were the major cost components. Our cost analysis approach may be adapted by others to conduct cost analyses of their CHW program. Our cost estimates can help inform future economic studies of CHW programs and resource allocation decisions. PMID:23794072

Low-cost precision rotary index calibration

NASA Astrophysics Data System (ADS)

Ng, T. W.; Lim, T. S.

2005-08-01

The traditional method for calibrating angular indexing repeatability of rotary axes on machine tools and measuring equipment is with a precision polygon (usually 12 sided) and an autocollimator or angular interferometer. Such a setup is typically expensive. Here, we propose a far more cost-effective approach that uses just a laser, diffractive optical element, and CCD camera. We show that significantly high accuracies can be achieved for angular index calibration.

Cost-effectiveness of diagnostic-therapeutic strategies for paediatric visceral leishmaniasis in Morocco

PubMed Central

Alonso, Sergi; Tachfouti, Nabil; Najdi, Adil; Sicuri, Elisa; Picado, Albert

2017-01-01

Introduction Visceral leishmaniasis (VL) is a neglected parasitic disease with a high fatality rate if left untreated. Endemic in Morocco, as well as in other countries in the Mediterranean basin, VL mainly affects children living in rural areas. In Morocco, the direct observation of Leishmania parasites in bone marrow (BM) aspirates is used to diagnose VL and meglumine antimoniate (SB) is the first line of treatment. Less invasive, more efficacious and safer alternatives exist. In this study we estimate the cost-effectiveness of alternative diagnostic-therapeutic algorithms for paediatric VL in Morocco. Methods A decision tree was used to estimate the cost-effectiveness of using BM or rapid diagnostic tests (RDTs) as diagnostic tools and/or SB or two liposomal amphotericin B (L-AmB) regimens: 6-day and 2-day courses to treat VL. Incremental cost-effectiveness ratios, expressed as cost per death averted, were estimated by comparing costs and effectiveness of the alternative algorithms. A threshold analysis evaluated at which price L-AmB became cost-effective compared with current practices. Results Implementing RDT and/or L-AmB treatments would be cost-effective in Morocco according to the WHO thresholds. Introducing the 6-day course L-AmB, current second-line treatment, would be highly cost-effective if L-AmB price was below US$100/phial. The 2-day L-AmB treatment, current standard treatment of paediatric VL in France, is highly cost-effective, with L-AmB at its market price (US$165/phial). Conclusions The results of this study should encourage the implementation of RDT and/or short-course L-AmB treatments for paediatric VL management in Morocco and other North African countries. PMID:29018581

Cost-effectiveness of diagnostic-therapeutic strategies for paediatric visceral leishmaniasis in Morocco.

PubMed

Alonso, Sergi; Tachfouti, Nabil; Najdi, Adil; Sicuri, Elisa; Picado, Albert

2017-01-01

Visceral leishmaniasis (VL) is a neglected parasitic disease with a high fatality rate if left untreated. Endemic in Morocco, as well as in other countries in the Mediterranean basin, VL mainly affects children living in rural areas. In Morocco, the direct observation of Leishmania parasites in bone marrow (BM) aspirates is used to diagnose VL and meglumine antimoniate (SB) is the first line of treatment. Less invasive, more efficacious and safer alternatives exist. In this study we estimate the cost-effectiveness of alternative diagnostic-therapeutic algorithms for paediatric VL in Morocco. A decision tree was used to estimate the cost-effectiveness of using BM or rapid diagnostic tests (RDTs) as diagnostic tools and/or SB or two liposomal amphotericin B (L-AmB) regimens: 6-day and 2-day courses to treat VL. Incremental cost-effectiveness ratios, expressed as cost per death averted, were estimated by comparing costs and effectiveness of the alternative algorithms. A threshold analysis evaluated at which price L-AmB became cost-effective compared with current practices. Implementing RDT and/or L-AmB treatments would be cost-effective in Morocco according to the WHO thresholds. Introducing the 6-day course L-AmB, current second-line treatment, would be highly cost-effective if L-AmB price was below US$100/phial. The 2-day L-AmB treatment, current standard treatment of paediatric VL in France, is highly cost-effective, with L-AmB at its market price (US$165/phial). The results of this study should encourage the implementation of RDT and/or short-course L-AmB treatments for paediatric VL management in Morocco and other North African countries.

Implementing a low-cost web-based clinical trial management system for community studies: a case study.

PubMed

Geyer, John; Myers, Kathleen; Vander Stoep, Ann; McCarty, Carolyn; Palmer, Nancy; DeSalvo, Amy

2011-10-01

Clinical trials with multiple intervention locations and a single research coordinating center can be logistically difficult to implement. Increasingly, web-based systems are used to provide clinical trial support with many commercial, open source, and proprietary systems in use. New web-based tools are available which can be customized without programming expertise to deliver web-based clinical trial management and data collection functions. To demonstrate the feasibility of utilizing low-cost configurable applications to create a customized web-based data collection and study management system for a five intervention site randomized clinical trial establishing the efficacy of providing evidence-based treatment via teleconferencing to children with attention-deficit hyperactivity disorder. The sites are small communities that would not usually be included in traditional randomized trials. A major goal was to develop database that participants could access from computers in their home communities for direct data entry. Discussed is the selection process leading to the identification and utilization of a cost-effective and user-friendly set of tools capable of customization for data collection and study management tasks. An online assessment collection application, template-based web portal creation application, and web-accessible Access 2007 database were selected and customized to provide the following features: schedule appointments, administer and monitor online secure assessments, issue subject incentives, and securely transmit electronic documents between sites. Each tool was configured by users with limited programming expertise. As of June 2011, the system has successfully been used with 125 participants in 5 communities, who have completed 536 sets of assessment questionnaires, 8 community therapists, and 11 research staff at the research coordinating center. Total automation of processes is not possible with the current set of tools as each is loosely affiliated, creating some inefficiency. This system is best suited to investigations with a single data source e.g., psychosocial questionnaires. New web-based applications can be used by investigators with limited programming experience to implement user-friendly, efficient, and cost-effective tools for multi-site clinical trials with small distant communities. Such systems allow the inclusion in research of populations that are not usually involved in clinical trials.

Developing an Internet-based Communication System for Residency Training Programs

PubMed Central

Fortin, Auguste H; Luzzi, Kristina; Galaty, Leslie; Wong, Jeffrey G; Huot, Stephen J

2002-01-01

Administrative communication is increasingly challenging for residency programs as the number of training sites expands. The Internet provides a cost-effective opportunity to address these needs. Using the World Wide Web, we developed a single, reliable, accurate, and accessible source of administrative information for residents, faculty, and staff in a multisite internal medicine residency at reduced costs. Evaluation of the effectiveness of the website was determined by tracking website use, materials and personnel costs, and resident, staff, and faculty satisfaction. Office supply and personnel costs were reduced by 89% and personnel effort by 85%. All users were highly satisfied with the web communication tool and all reported increased knowledge of program information and a greater sense of “connectedness.” We conclude that an internet-based communication system that provides a single, reliable, accurate, and accessible source of information for residents, faculty, and staff can be developed with minimum resources and reduced costs. PMID:11972724

Hidden Costs: the ethics of cost-effectiveness analyses for health interventions in resource-limited settings

PubMed Central

Rutstein, Sarah E.; Price, Joan T.; Rosenberg, Nora E.; Rennie, Stuart M.; Biddle, Andrea K.; Miller, William C.

2017-01-01

Cost-effectiveness analysis (CEA) is an increasingly appealing tool for evaluating and comparing health-related interventions in resource-limited settings. The goal is to inform decision-makers regarding the health benefits and associated costs of alternative interventions, helping guide allocation of limited resources by prioritizing interventions that offer the most health for the least money. Although only one component of a more complex decision-making process, CEAs influence the distribution of healthcare resources, directly influencing morbidity and mortality for the world’s most vulnerable populations. However, CEA-associated measures are frequently setting-specific valuations, and CEA outcomes may violate ethical principles of equity and distributive justice. We examine the assumptions and analytical tools used in CEAs that may conflict with societal values. We then evaluate contextual features unique to resource-limited settings, including the source of health-state utilities and disability weights; implications of CEA thresholds in light of economic uncertainty; and the role of external donors. Finally, we explore opportunities to help align interpretation of CEA outcomes with values and budgetary constraints in resource-limited settings. The ethical implications of CEAs in resource-limited settings are vast. It is imperative that CEA outcome summary measures and implementation thresholds adequately reflect societal values and ethical priorities in resource-limited settings. PMID:27141969

Hidden costs: The ethics of cost-effectiveness analyses for health interventions in resource-limited settings.

PubMed

Rutstein, Sarah E; Price, Joan T; Rosenberg, Nora E; Rennie, Stuart M; Biddle, Andrea K; Miller, William C

2017-10-01

Cost-effectiveness analysis (CEA) is an increasingly appealing tool for evaluating and comparing health-related interventions in resource-limited settings. The goal is to inform decision-makers regarding the health benefits and associated costs of alternative interventions, helping guide allocation of limited resources by prioritising interventions that offer the most health for the least money. Although only one component of a more complex decision-making process, CEAs influence the distribution of health-care resources, directly influencing morbidity and mortality for the world's most vulnerable populations. However, CEA-associated measures are frequently setting-specific valuations, and CEA outcomes may violate ethical principles of equity and distributive justice. We examine the assumptions and analytical tools used in CEAs that may conflict with societal values. We then evaluate contextual features unique to resource-limited settings, including the source of health-state utilities and disability weights, implications of CEA thresholds in light of economic uncertainty, and the role of external donors. Finally, we explore opportunities to help align interpretation of CEA outcomes with values and budgetary constraints in resource-limited settings. The ethical implications of CEAs in resource-limited settings are vast. It is imperative that CEA outcome summary measures and implementation thresholds adequately reflect societal values and ethical priorities in resource-limited settings.

Cost-effectiveness in fall prevention for older women.

PubMed

Hektoen, Liv F; Aas, Eline; Lurås, Hilde

2009-08-01

The aim of this study was to estimate the cost-effectiveness of implementing an exercise-based fall prevention programme for home-dwelling women in the > or = 80-year age group in Norway. The impact of the home-based individual exercise programme on the number of falls is based on a New Zealand study. On the basis of the cost estimates and the estimated reduction in the number of falls obtained with the chosen programme, we calculated the incremental costs and the incremental effect of the exercise programme as compared with no prevention. The calculation of the average healthcare cost of falling was based on assumptions regarding the distribution of fall injuries reported in the literature, four constructed representative case histories, assumptions regarding healthcare provision associated with the treatment of the specified cases, and estimated unit costs from Norwegian cost data. We calculated the average healthcare costs per fall for the first year. We found that the reduction in healthcare costs per individual for treating fall-related injuries was 1.85 times higher than the cost of implementing a fall prevention programme. The reduction in healthcare costs more than offset the cost of the prevention programme for women aged > or = 80 years living at home, which indicates that health authorities should increase their focus on prevention. The main intention of this article is to stipulate costs connected to falls among the elderly in a transparent way and visualize the whole cost picture. Cost-effectiveness analysis is a health policy tool that makes politicians and other makers of health policy conscious of this complexity.

Developing a realistic-prototyping road user cost evaluation tool for FDOT.

DOT National Transportation Integrated Search

2008-12-31

The objective of this project is to develop a realistic-prototyping RUC (Road User Cost) calculation tool that is userfriendly : and utilizing limited number of data inputs that are easy to use. The tool can help engineers to estimate RUC on : specif...

The Mission Planning Lab: A Visualization and Analysis Tool

NASA Technical Reports Server (NTRS)

Daugherty, Sarah C.; Cervantes, Benjamin W.

2009-01-01

Simulation and visualization are powerful decision making tools that are time-saving and cost-effective. Space missions pose testing and e valuation challenges that can be overcome through modeling, simulatio n, and visualization of mission parameters. The National Aeronautics and Space Administration?s (NASA) Wallops Flight Facility (WFF) capi talizes on the benefits of modeling, simulation, and visualization to ols through a project initiative called The Mission Planning Lab (MPL ).

Defining a caring hospital by using currently implemented survey tools.

PubMed

Jennings, Nancy

2010-09-01

Health care organizations are constantly striving to provide a more cost-effective and higher quality treatment within a caring environment. However, balancing the demands of regulatory agencies with the holistic needs of the patient is challenging. Further challenging is how to define those hospitals that provide an exceptional caring environment for their patients. By using survey tools that are already being administered in hospital settings, the opportunity exists to analyze the results obtained from these tools to define a hospital as a caring organization without the added burden of separate data collection.

Cost-effectiveness analysis of implementing an antimicrobial stewardship program in critical care units.

PubMed

Ruiz-Ramos, Jesus; Frasquet, Juan; Romá, Eva; Poveda-Andres, Jose Luis; Salavert-Leti, Miguel; Castellanos, Alvaro; Ramirez, Paula

2017-06-01

To evaluate the cost-effectiveness of antimicrobial stewardship (AS) program implementation focused on critical care units based on assumptions for the Spanish setting. A decision model comparing costs and outcomes of sepsis, community-acquired pneumonia, and nosocomial infections (including catheter-related bacteremia, urinary tract infection, and ventilator-associated pneumonia) in critical care units with or without an AS was designed. Model variables and costs, along with their distributions, were obtained from the literature. The study was performed from the Spanish National Health System (NHS) perspective, including only direct costs. The Incremental Cost-Effectiveness Ratio (ICER) was analysed regarding the ability of the program to reduce multi-drug resistant bacteria. Uncertainty in ICERs was evaluated with probabilistic sensitivity analyses. In the short-term, implementing an AS reduces the consumption of antimicrobials with a net benefit of €71,738. In the long-term, the maintenance of the program involves an additional cost to the system of €107,569. Cost per avoided resistance was €7,342, and cost-per-life-years gained (LYG) was €9,788. Results from the probabilistic sensitivity analysis showed that there was a more than 90% likelihood that an AS would be cost-effective at a level of €8,000 per LYG. Wide variability of economic results obtained from the implementation of this type of AS program and short information on their impact on patient evolution and any resistance avoided. Implementing an AS focusing on critical care patients is a long-term cost-effective tool. Implementation costs are amortized by reducing antimicrobial consumption to prevent infection by multidrug-resistant pathogens.

New Technologies: Real-time Telepathology Systems-Novel Cost-effective Tools for Real-time Consultation and Data Sharing.

PubMed

Siegel, Gabriel; Regelman, Dan; Maronpot, Robert; Rosenstock, Moti; Nyska, Abraham

2017-12-01

Real-time telepathology for use in investigative and regulated preclinical toxicology studies is now feasible. Newly developed microscope-integrated telepathology systems enable geographically remote stakeholders to view the live histopathology slide as seen by the study pathologist within the microscope. Simultaneous online viewing and dialog between study pathologist and remote colleagues is an efficient and cost-effective means for consultation, pathology working groups, and peer review, facilitating good science and economic benefits by enabling more timely and informed clinical decisions.

The Cost-Effective Evaluation of Syncope.

PubMed

Angus, Steven

2016-09-01

Syncope is a common clinical problem that carries a high socioeconomic burden. A structured approach in the evaluation of syncope with special emphasis on a detailed history, comprehensive physical examination that includes orthostatic vital signs, and an electrocardiogram, proves to be the most cost-effective approach. The need for additional testing and hospital admission should be based on the results of the initial evaluation and use of risk-stratification tools that help identify those syncope patients at highest risk for poor outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

Parametric evaluation of the cost effectiveness of Shuttle payload vibroacoustic test plans

NASA Technical Reports Server (NTRS)

Stahle, C. V.; Gongloff, H. R.; Keegan, W. B.; Young, J. P.

1978-01-01

Consideration is given to alternate vibroacoustic test plans for sortie and free flyer Shuttle payloads. Statistical decision models for nine test plans provide a viable method of evaluating the cost effectiveness of alternate vibroacoustic test plans and the associated test levels. The methodology is a major step toward the development of a useful tool for the quantitative tailoring of vibroacoustic test programs to sortie and free flyer payloads. A broader application of the methodology is now possible by the use of the OCTAVE computer code.

Thermal energy and economic analysis of a PCM-enhanced household envelope considering different climate zones in Morocco

NASA Astrophysics Data System (ADS)

Kharbouch, Yassine; Mimet, Abdelaziz; El Ganaoui, Mohammed; Ouhsaine, Lahoucine

2018-07-01

This study investigates the thermal energy potentials and economic feasibility of an air-conditioned family household-integrated phase change material (PCM) considering different climate zones in Morocco. A simulation-based optimisation was carried out in order to define the optimal design of a PCM-enhanced household envelope for thermal energy effectiveness and cost-effectiveness of predefined candidate solutions. The optimisation methodology is based on coupling Energyplus® as a dynamic simulation tool and GenOpt® as an optimisation tool. Considering the obtained optimum design strategies, a thermal energy and economic analysis are carried out to investigate PCMs' integration feasibility in the Moroccan constructions. The results show that the PCM-integrated household envelope allows minimising the cooling/heating thermal energy demand vs. a reference household without PCM. While for the cost-effectiveness optimisation, it has been deduced that the economic feasibility is stilling insufficient under the actual PCM market conditions. The optimal design parameters results are also analysed.

Carbon footprint analysis as a tool for energy and environmental management in small and medium-sized enterprises

NASA Astrophysics Data System (ADS)

Giama, E.; Papadopoulos, A. M.

2018-01-01

The reduction of carbon emissions has become a top priority in the decision-making process for governments and companies, the strict European legislation framework being a major driving force behind this effort. On the other hand, many companies face difficulties in estimating their footprint and in linking the results derived from environmental evaluation processes with an integrated energy management strategy, which will eventually lead to energy-efficient and cost-effective solutions. The paper highlights the need of companies to establish integrated environmental management practices, with tools such as carbon footprint analysis to monitor the energy performance of production processes. Concepts and methods are analysed, and selected indicators are presented by means of benchmarking, monitoring and reporting the results in order to be used effectively from the companies. The study is based on data from more than 90 Greek small and medium enterprises, followed by a comprehensive discussion of cost-effective and realistic energy-saving measures.

2D net shape weaving for cost effective manufacture of textile reinforced composites

NASA Astrophysics Data System (ADS)

Vo, D. M. P.; Kern, M.; Hoffmann, G.; Cherif, C.

2017-10-01

Despite significant weight and performance advantages over metal parts, the today’s demand for fibre-reinforced polymer composites (FRPC) has been limited mainly by their large manufacturing cost. The combination of dry textile preforms and low-cost consolidation processes such as resin transfer molding (RTM) has been appointed as a promising approach to low-cost FRPC manufacture. At the current state of the art, tooling and impregnation technology is well understood whereas preform fabrication technology has not been developed effectively. This paper presents an advanced 2D net shape weaving technology developed with the aim to establish a more cost effective system for the manufacture of dry textile preforms for FRPC. 2D net shape weaving is developed based on open reed weave (ORW) technology and enables the manufacture of 2D contoured woven fabrics with firm edge, so that oversize cutting and hand trimming after molding are no longer required. The introduction of 2D net shape woven fabrics helps to reduce material waste, cycle time and preform manufacturing cost significantly. Furthermore, higher grade of automation in preform fabrication can be achieved.

Computer aided drug design

NASA Astrophysics Data System (ADS)

Jain, A.

2017-08-01

Computer based method can help in discovery of leads and can potentially eliminate chemical synthesis and screening of many irrelevant compounds, and in this way, it save time as well as cost. Molecular modeling systems are powerful tools for building, visualizing, analyzing and storing models of complex molecular structure that can help to interpretate structure activity relationship. The use of various techniques of molecular mechanics and dynamics and software in Computer aided drug design along with statistics analysis is powerful tool for the medicinal chemistry to synthesis therapeutic and effective drugs with minimum side effect.

The Cost-Effectiveness of High-Risk Lung Cancer Screening and Drivers of Program Efficiency.

PubMed

Cressman, Sonya; Peacock, Stuart J; Tammemägi, Martin C; Evans, William K; Leighl, Natasha B; Goffin, John R; Tremblay, Alain; Liu, Geoffrey; Manos, Daria; MacEachern, Paul; Bhatia, Rick; Puksa, Serge; Nicholas, Garth; McWilliams, Annette; Mayo, John R; Yee, John; English, John C; Pataky, Reka; McPherson, Emily; Atkar-Khattra, Sukhinder; Johnston, Michael R; Schmidt, Heidi; Shepherd, Frances A; Soghrati, Kam; Amjadi, Kayvan; Burrowes, Paul; Couture, Christian; Sekhon, Harmanjatinder S; Yasufuku, Kazuhiro; Goss, Glenwood; Ionescu, Diana N; Hwang, David M; Martel, Simon; Sin, Don D; Tan, Wan C; Urbanski, Stefan; Xu, Zhaolin; Tsao, Ming-Sound; Lam, Stephen

2017-08-01

Lung cancer risk prediction models have the potential to make programs more affordable; however, the economic evidence is limited. Participants in the National Lung Cancer Screening Trial (NLST) were retrospectively identified with the risk prediction tool developed from the Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial. The high-risk subgroup was assessed for lung cancer incidence and demographic characteristics compared with those in the low-risk subgroup and the Pan-Canadian Early Detection of Lung Cancer Study (PanCan), which is an observational study that was high-risk-selected in Canada. A comparison of high-risk screening versus standard care was made with a decision-analytic model using data from the NLST with Canadian cost data from screening and treatment in the PanCan study. Probabilistic and deterministic sensitivity analyses were undertaken to assess uncertainty and identify drivers of program efficiency. Use of the risk prediction tool developed from the Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial with a threshold set at 2% over 6 years would have reduced the number of individuals who needed to be screened in the NLST by 81%. High-risk screening participants in the NLST had more adverse demographic characteristics than their counterparts in the PanCan study. High-risk screening would cost $20,724 (in 2015 Canadian dollars) per quality-adjusted life-year gained and would be considered cost-effective at a willingness-to-pay threshold of $100,000 in Canadian dollars per quality-adjusted life-year gained with a probability of 0.62. Cost-effectiveness was driven primarily by non-lung cancer outcomes. Higher noncurative drug costs or current costs for immunotherapy and targeted therapies in the United States would render lung cancer screening a cost-saving intervention. Non-lung cancer outcomes drive screening efficiency in diverse, tobacco-exposed populations. Use of risk selection can reduce the budget impact, and screening may even offer cost savings if noncurative treatment costs continue to rise. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Alternative Fuels Data Center: Diesel Vehicles Using Biodiesel

Science.gov Websites

Publications | All Publications Tools Vehicle Cost Calculator Laws and Incentives Search All Tools Vehicle Cost Calculator Choose a vehicle to compare fuel cost and emissions with a conventional vehicle. Select Fuel ) Propane (LPG) Next Vehicle Cost Calculator Vehicle 0 City 0 Hwy (mi/gal) 0 City 0 Hwy (kWh/100m) Gasoline

Calculating Optimum sowing factor: A tool to evaluate sowing strategies and minimize seedling production cost

Treesearch

Eric van Steenis

2013-01-01

This paper illustrates how to use an excel spreadsheet as a decision-making tool to determine optimum sowing factor to minimize seedling production cost. Factors incorporated into the spreadsheet calculations include germination percentage, seeder accuracy, cost per seed, cavities per block, costs of handling, thinning, and transplanting labor, and more. In addition to...

Cost-effective public health guidance: asking questions from the decision-maker's viewpoint.

PubMed

Chalkidou, Kalipso; Culyer, Anthony; Naidoo, Bhash; Littlejohns, Peter

2008-03-01

In February 2004, in his assessment of the long-term financial viability of the NHS, Derek Wanless recommended the use of 'a consistent framework, such as the methodology developed by NICE, to evaluate the cost-effectiveness of interventions and initiatives across health care and public health'. One year later public health was added to NICE's remit and the new National Institute for Health and Clinical Excellence (NICE) was established, with amended statutory instruments to permit consideration of broader public sector costs when developing cost-effective guidance for public health. With the principle of 'a consistent framework' put forward by Wanless as the starting point, this paper provides an insight into the most challenging aspects of applying the principles of cost-effectiveness analysis in the public health context from the policymaker's perspective. It reflects on the long-term consequences of taking on responsibility for producing public health guidance on the Institute's overall approach to guidance development and describes the tension between striving for consistency and cross-evaluation comparability while ensuring that the methodological tools used are fit for the purpose of developing public health guidance.

Cost/CYP: a bottom line that helps keep CSM projects cost-efficient.

PubMed

1985-01-01

In contraceptive social marketing (CSM), the objective is social good, but project managers also need to run a tight ship, trimming costs, allocating scarce funds, and monitoring their program's progress. 1 way CSM managers remain cost-conscious is through the concept of couple-years-of-protection (CYP). Devised 2 decades ago as an administrative tool to compare the effects of different contraceptive methods, CYP's uses have multiplied to include assessing program output and cost effectiveness. Some of the factors affecting cost/CYP are a project's age, sales volume, management efficiency, and product prices and line. These factors are interconnected. The cost/CYP figures given here do not include outlays for commodities. While the Agency for International Development's commodity costs alter slightly with each new purchase contrast, the agency reports that a condom costs about 4 cents (US), an oral contraceptive (OC) cycle about 12 cents, and a spermicidal tablet about 7 cents. CSM projects have relatively high start-up costs. Within a project's first 2 years, expenses must cover such marketing activities as research, packaging, warehousing, and heavy promotion. As a project ages, sales should grow, producing revenues that gradually amortize these initial costs. The Nepal CSM project provides an example of how cost/CYP can improve as a program ages. In 1978, the year sales began, the project's cost/CYP was about $84. For some time the project struggled to get its products to its target market and gradually overcome several major hurdles. The acquisition of jeeps eased distribution and, by adding another condom brand, sales were increased still more, bringing the cost/CYP down to $8.30 in 1981. With further sales increases and resulting revenues, the cost/CYP dropped to just over $7 in 1983. When the sales volume becomes large enough, CSM projects can achieve economies of scale, which greatly improves cost-efficiency. Fixed costs shrink as a proportion of total expenditures. Good project management goes hand-in-hand with increasing sales. Cost/CYP is a powerful tool, but some project strategies alter its meaning. Some projects have lowered net costs by selling products at high prices. This dilutes the social marketing credo of getting low-cost projects to those in need. When this occurs, cost/CYP undergoes an identity crisis, for it no longer measures a purely social objective.

Medical Abortion Provided by Nurse-Midwives or Physicians in a High Resource Setting: A Cost-Effectiveness Analysis.

PubMed

Sjöström, Susanne; Kopp Kallner, Helena; Simeonova, Emilia; Madestam, Andreas; Gemzell-Danielsson, Kristina

2016-01-01

The objective of the present study is to calculate the cost-effectiveness of early medical abortion performed by nurse-midwifes in comparison to physicians in a high resource setting where ultrasound dating is part of the protocol. Non-physician health care professionals have previously been shown to provide medical abortion as effectively and safely as physicians, but the cost-effectiveness of such task shifting remains to be established. A cost effectiveness analysis was conducted based on data from a previously published randomized-controlled equivalence study including 1180 healthy women randomized to the standard procedure, early medical abortion provided by physicians, or the intervention, provision by nurse-midwifes. A 1.6% risk difference for efficacy defined as complete abortion without surgical interventions in favor of midwife provision was established which means that for every 100 procedures, the intervention treatment resulted in 1.6 fewer incomplete abortions needing surgical intervention than the standard treatment. The average direct and indirect costs and the incremental cost-effectiveness ratio (ICER) were calculated. The study was conducted at a university hospital in Stockholm, Sweden. The average direct costs per procedure were EUR 45 for the intervention compared to EUR 58.3 for the standard procedure. Both the cost and the efficacy of the intervention were superior to the standard treatment resulting in a negative ICER at EUR -831 based on direct costs and EUR -1769 considering total costs per surgical intervention avoided. Early medical abortion provided by nurse-midwives is more cost-effective than provision by physicians. This evidence provides clinicians and decision makers with an important tool that may influence policy and clinical practice and eventually increase numbers of abortion providers and reduce one barrier to women's access to safe abortion.

Cost-effectiveness of osteoporosis screening strategies for hip fracture prevention in older Chinese people: a decision tree modeling study in the Mr. OS and Ms. OS cohort in Hong Kong.

PubMed

Su, Y; Lai, F T T; Yip, B H K; Leung, J C S; Kwok, T C Y

2018-05-17

Despite the high costs of hip fracture, many governments provide limited support for osteoporosis screening. We demonstrated that osteoporosis screening by dual-energy X-ray absorptiometry (DXA) with or without pre-screening by Fracture Risk Assessment Tool (FRAX) or calcaneal ultrasound are more cost-effective than no screening in Chinese people aged 65 or over in Hong Kong. To examine the cost-effective potential osteoporosis screening strategies for hip fracture prevention in Hong Kong. Decision tree models were constructed to evaluate the cost per quality-adjusted life years (QALYs) of the different osteoporosis screening strategies followed by subsequent 5-year treatment with alendronate compared to no screening (but treat if a hip fracture occurs). The multiple osteoporosis screening strategies were composed of alternative tests and initiation age groups were evaluated with a 10-year horizon, and treatment were assigned if central dual-energy X-ray absorptiometry (DXA) T-score (at either the hip or spine) is - 2.5 or less. Strategies included DXA for all people and pre-screening with the Fracture Risk Assessment Tool (FRAX) at specific thresholds or by calcaneal quantitative ultrasonography (QUS) before taking DXA examination. All the model inputs were based on the Mr. OS and Ms. OS Hong Kong cohort; data are obtained from the Social Welfare Department or the published literature. All of the screening strategies, including the universal screening with DXA and the pre-screening with FRAX or QUS before DXA, were consistently more cost-effective than no screening for people aged 65 years old or over. One-way sensitivity analysis with a more optimistic assumption on treatment adherence or inclusion of other major osteoporotic fractures did not change the results materially. Probabilistic sensitivity analyses showed a dominant role of pre-screening with FRAX followed by subsequent osteoporosis drug treatment in people aged 70 years old or over in Hong Kong. Osteoporosis screening strategies based on DXA with or without pre-screening are more cost-effective compared to no screening for Chinese people aged 65 or over in Hong Kong.

Cost-benefit and effectiveness analysis of rapid testing for MRSA carriage in a hospital setting.

PubMed

Henson, Gay; Ghonim, Elham; Swiatlo, Andrea; King, Shelia; Moore, Kimberly S; King, S Travis; Sullivan, Donna

2014-01-01

A cost-effectiveness analysis was conducted comparing the polymerase chain reaction assay and traditional microbiological culture as screening tools for the identification of methicillin-resistant Staphylococcus aureus (MRSA) in patients admitted to the pediatric and surgical intensive care units (PICU and SICU) at a 722 bed academic medical center. In addition, the cost benefits of identification of colonized MRSA patients were determined. The cost-effectiveness analysis employed actual hospital and laboratory costs, not patient costs. The actual cost of the PCR assay was higher than the microbiological culture identification of MRSA ($602.95 versus $364.30 per positive carrier identified). However, this did not include the decreased turn-around time of PCR assays compared to traditional culture techniques. Patient costs were determined indirectly in the cost-benefit analysis of clinical outcome. There was a reduction in MRSA hospital-acquired infection (3.5 MRSA HAI/month without screening versus 0.6/month with screening by PCR). A cost-benefit analysis based on differences in length of stay suggests an associated savings in hospitalization costs: MRSA HAI with 29.5 day median LOS at $63,810 versus MRSA identified on admission with 6 day median LOS at $14,561, a difference of $49,249 per hospitalization. Although this pilot study was small and it is not possible to directly relate the cost-effectiveness and cost-benefit analysis due to confounding factors such as patient underlying morbidity and mortality, a reduction of 2.9 MRSA HAI/month associated with PCR screening suggests potential savings in hospitalization costs of $142,822 per month.

Technical Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Zoe Kant

2009-01-07

The Nature Conservancy participated in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project was 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration'. The objectives of the project were to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providingmore » new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Final Technical Report discusses the results of the six tasks that The Nature Conservancy undertook to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between July 1st 2001 and July 10th 2008. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. The project occurred in two phases. The first was a focused exploration of specific carbon measurement and monitoring methodologies and pre-selected carbon sequestration opportunities. The second was a more systematic and comprehensive approach to compare various competing measurement and monitoring methodologies, and assessment of a variety of carbon sequestration opportunities in order to find those that are the lowest cost with the greatest combined carbon and other environmental benefits. In the first phase we worked in the U.S., Brazil, Belize, Bolivia, Peru, and Chile to develop and refine specific carbon inventory methods, pioneering a new remote-sensing method for cost-effectively measuring and monitoring terrestrial carbon sequestration and system for developing carbon baselines for both avoided deforestation and afforestation/reforestation projects. We evaluated the costs and carbon benefits of a number of specific terrestrial carbon sequestration activities throughout the U.S., including reforestation of abandoned mined lands in southwest Virginia, grassland restoration in Arizona and Indiana, and reforestation in the Mississippi Alluvial Delta. The most cost-effective U.S. terrestrial sequestration opportunity we found through these studies was reforestation in the Mississippi Alluvial Delta. In Phase II we conducted a more systematic assessment and comparison of several different measurement and monitoring approaches in the Northern Cascades of California, and a broad 11-state Northeast regional assessment, rather than pre-selected and targeted, analysis of terrestrial sequestration costs and benefits. Work was carried out in Brazil, Belize, Chile, Peru and the USA. Partners include the Winrock International Institute for Agricultural Development, The Sampson Group, Programme for Belize, Society for Wildlife Conservation (SPVS), Universidad Austral de Chile, Michael Lefsky, Colorado State University, UC Berkeley, the Carnegie Institution of Washington, ProNaturaleza, Ohio State University, Stephen F. Austin University, Geographical Modeling Services, Inc., WestWater, Los Alamos National Laboratory, Century Ecosystem Services, Mirant Corporation, General Motors, American Electric Power, Salt River Project, Applied Energy Systems, KeySpan, NiSource, and PSEG. This project, 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration', has resulted in over 50 presentations and reports, available publicly through the Department of Energy or by visiting the links listed in Appendix 1. More important than the reports, the project has helped to lead to the development of on-the-ground projects in Southwestern Virginia, Louisiana, and Chile while informing policy development in Virginia, the Regional Greenhouse Gas Initiative, the California Climate Action Registry and U.S. and international programs.« less

Effects of a clinical pathway for video-assisted thoracoscopic surgery (VATS) on quality and cost of care.

PubMed

Schwarzbach, Matthias H M; Ronellenfitsch, Ulrich; Wang, Qian; Rössner, Eric D; Denz, Christof; Post, Stefan; Hohenberger, Peter

2010-04-01

The purpose of this study was to evaluate effects of a clinical pathway (CP) for video-assisted thoracoscopic surgery (VATS) on process quality, outcome quality, and hospital costs. We implemented a CP for VATS and compared 34 patients treated with CP to 77 patients treated without CP. Indicators for process quality were duration of catheter placement, pain intensity, respiratory exercising, and mobilization. Outcome quality was measured through morbidity, mortality, reoperations, and readmissions. Cost of hospital stay was calculated using an imputed daily rate. Foley catheters were removed significantly earlier after CP implementation. All patients on CP were mobilized and received pulmonary exercising on the operation day. Pain levels were low after CP implementation. Median hospital stay significantly reduced by 5 days. Perioperative outcome quality remained unchanged. Costs significantly diminished by 1,510 Euro per stay. CP implementation had positive effects on process quality. Specifically, catheter management was improved and a good pain control achieved. Patients benefited from shortened stay and were treated at lower cost. A clear effect on outcome quality was not found. CPs are a promising tool for quality improvement and cost containment in thoracic surgery.

Cost-effectiveness of screening for asymptomatic carotid atherosclerotic disease.

PubMed

Derdeyn, C P; Powers, W J

1996-11-01

The value of screening for asymptomatic carotid stenosis has become an important issue with the recently reported beneficial effect of endarterectomy. The purpose of this study is to evaluate the cost-effectiveness of using Doppler ultrasound as a screening tool to select subjects for arteriography and subsequent surgery. A computer model was developed to simulate the cost-effectiveness of screening a cohort of 1000 men during a 20-year period. The primary outcome measure was incremental present-value dollar expenditures for screening and treatment per incremental present-value quality-adjusted life-year (QALY) saved. Estimates of disease prevalence and arteriographic and surgical complication rates were obtained from the literature. Probabilities of stroke and death with surgical and medical treatment were obtained from published clinical trials. Doppler ultrasound sensitivity and specificity were obtained through review of local experience. Estimates of costs were obtained from local Medicare reimbursement data. A one-time screening program of a population with a high prevalence (20%) of > or = 60% stenosis cost $35130 per incremental QALY gained. Decreased surgical benefit or increased annual discount rate was detrimental, resulting in lost QALYs. Annual screening cost $457773 per incremental QALY gained. In a low-prevalence (4%) population, one-time screening cost $52588 per QALY gained, while annual screening was detrimental. The cost-effectiveness of a one-time screening program for an asymptomatic population with a high prevalence of carotid stenosis may be cost-effective. Annual screening is detrimental. The most sensitive variables in this simulation model were long-term stroke risk reduction after surgery and annual discount rate for accumulated costs and QALYs.

Treatment Cost Analysis Tool (TCAT) for Estimating Costs of Outpatient Treatment Services

PubMed Central

Flynn, Patrick M.; Broome, Kirk M.; Beaston-Blaakman, Aaron; Knight, Danica K.; Horgan, Constance M.; Shepard, Donald S.

2009-01-01

A Microsoft® Excel-based workbook designed for research analysts to use in a national study was retooled for treatment program directors and financial officers to allocate, analyze, and estimate outpatient treatment costs in the U.S. This instrument can also be used as a planning and management tool to optimize resources and forecast the impact of future changes in staffing, client flow, program design, and other resources. The Treatment Cost Analysis Tool (TCAT) automatically provides feedback and generates summaries and charts using comparative data from a national sample of non-methadone outpatient providers. TCAT is being used by program staff to capture and allocate both economic and accounting costs, and outpatient service costs are reported for a sample of 70 programs. Costs for an episode of treatment in regular, intensive, and mixed types of outpatient treatment types were $882, $1,310, and $1,381 respectively (based on 20% trimmed means and 2006 dollars). An hour of counseling cost $64 in regular, $85 intensive, and $86 mixed. Group counseling hourly costs per client were $8, $11, and $10 respectively for regular, intensive, and mixed. Future directions include use of a web-based interview version, much like some of the commercially available tax preparation software tools, and extensions for use in other modalities of treatment. PMID:19004576

Treatment Cost Analysis Tool (TCAT) for estimating costs of outpatient treatment services.

PubMed

Flynn, Patrick M; Broome, Kirk M; Beaston-Blaakman, Aaron; Knight, Danica K; Horgan, Constance M; Shepard, Donald S

2009-02-01

A Microsoft Excel-based workbook designed for research analysts to use in a national study was retooled for treatment program directors and financial officers to allocate, analyze, and estimate outpatient treatment costs in the U.S. This instrument can also be used as a planning and management tool to optimize resources and forecast the impact of future changes in staffing, client flow, program design, and other resources. The Treatment Cost Analysis Tool (TCAT) automatically provides feedback and generates summaries and charts using comparative data from a national sample of non-methadone outpatient providers. TCAT is being used by program staff to capture and allocate both economic and accounting costs, and outpatient service costs are reported for a sample of 70 programs. Costs for an episode of treatment in regular, intensive, and mixed types of outpatient treatment were $882, $1310, and $1381 respectively (based on 20% trimmed means and 2006 dollars). An hour of counseling cost $64 in regular, $85 intensive, and $86 mixed. Group counseling hourly costs per client were $8, $11, and $10 respectively for regular, intensive, and mixed. Future directions include use of a web-based interview version, much like some of the commercially available tax preparation software tools, and extensions for use in other modalities of treatment.

Cost-effectiveness modelling in diagnostic imaging: a stepwise approach.

PubMed

Sailer, Anna M; van Zwam, Wim H; Wildberger, Joachim E; Grutters, Janneke P C

2015-12-01

Diagnostic imaging (DI) is the fastest growing sector in medical expenditures and takes a central role in medical decision-making. The increasing number of various and new imaging technologies induces a growing demand for cost-effectiveness analysis (CEA) in imaging technology assessment. In this article we provide a comprehensive framework of direct and indirect effects that should be considered for CEA in DI, suitable for all imaging modalities. We describe and explain the methodology of decision analytic modelling in six steps aiming to transfer theory of CEA to clinical research by demonstrating key principles of CEA in a practical approach. We thereby provide radiologists with an introduction to the tools necessary to perform and interpret CEA as part of their research and clinical practice. • DI influences medical decision making, affecting both costs and health outcome. • This article provides a comprehensive framework for CEA in DI. • A six-step methodology for conducting and interpreting cost-effectiveness modelling is proposed.

Tools developed and disseminated by guideline producers to promote the uptake of their guidelines.

PubMed

Flodgren, Gerd; Hall, Amanda M; Goulding, Lucy; Eccles, Martin P; Grimshaw, Jeremy M; Leng, Gillian C; Shepperd, Sasha

2016-08-22

The uptake of clinical practice guidelines (CPGs) is inconsistent, despite their potential to improve the quality of health care and patient outcomes. Some guideline producers have addressed this problem by developing tools to encourage faster adoption of new guidelines. This review focuses on the effectiveness of tools developed and disseminated by guideline producers to improve the uptake of their CPGs. To evaluate the effectiveness of implementation tools developed and disseminated by guideline producers, which accompany or follow the publication of a CPG, to promote uptake. A secondary objective is to determine which approaches to guideline implementation are most effective. We searched the Cochrane Effective Practice and Organisation of Care (EPOC) Group Specialised Register, Cochrane Central Register of Controlled Trials (CENTRAL); NHS Economic Evaluation Database, HTA Database; MEDLINE and MEDLINE In-Process and other non-indexed citations; Embase; PsycINFO; CINAHL; Dissertations and Theses, ProQuest; Index to Theses; Science Citation Index Expanded, ISI Web of Knowledge; Conference Proceedings Citation Index - Science, ISI Web of Knowledge; Health Management Information Consortium (HMIC), and NHS Evidence up to February 2016. We also searched trials registers, reference lists of included studies and relevant websites. We included randomised controlled trials (RCTs) and cluster-RCTs, controlled before-and-after studies (CBAs) and interrupted time series (ITS) studies evaluating the effects of guideline implementation tools developed by recognised guideline producers to improve the uptake of their own guidelines. The guideline could target any clinical area. Two review authors independently extracted data and assessed the risk of bias of each included study using the Cochrane 'Risk of bias' criteria. We graded our confidence in the evidence using the approach recommended by the GRADE working group. The clinical conditions targeted and the implementation tools used were too heterogenous to combine data for meta-analysis. We report the median absolute risk difference (ARD) and interquartile range (IQR) for the main outcome of adherence to guidelines. We included four cluster-RCTs that were conducted in the Netherlands, France, the USA and Canada. These studies evaluated the effects of tools developed by national guideline producers to implement their CPGs. The implementation tools evaluated targeted healthcare professionals; none targeted healthcare organisations or patients.One study used two short educational workshops tailored to barriers. In three studies the intervention consisted of the provision of paper-based educational materials, order forms or reminders, or both. The clinical condition, type of healthcare professional, and behaviour targeted by the CPG varied across studies.Two of the four included studies reported data on healthcare professionals' adherence to guidelines. A guideline tool developed by the producers of a guideline probably leads to increased adherence to the guidelines; median ARD (IQR) was 0.135 (0.115 and 0.159 for the two studies respectively) at an average four-week follow-up (moderate certainty evidence), which indicates a median 13.5% greater adherence to guidelines in the intervention group. Providing healthcare professionals with a tool to improve implementation of a guideline may lead to little or no difference in costs to the health service. Implementation tools developed by recognised guideline producers probably lead to improved healthcare professionals' adherence to guidelines in the management of non-specific low back pain and ordering thyroid-function tests. There are limited data on the relative costs of implementing these interventions.There are no studies evaluating the effectiveness of interventions targeting the organisation of care (e.g. benchmarking tools, costing templates, etc.), or for mass media interventions. We could not draw any conclusions about our second objective, the comparative effectiveness of implementation tools, due to the small number of studies, the heterogeneity between interventions, and the clinical conditions that were targeted.

Analyzing medical costs with time-dependent treatment: The nested g-formula.

PubMed

Spieker, Andrew; Roy, Jason; Mitra, Nandita

2018-04-16

As medical expenses continue to rise, methods to properly analyze cost outcomes are becoming of increasing relevance when seeking to compare average costs across treatments. Inverse probability weighted regression models have been developed to address the challenge of cost censoring in order to identify intent-to-treat effects (i.e., to compare mean costs between groups on the basis of their initial treatment assignment, irrespective of any subsequent changes to their treatment status). In this paper, we describe a nested g-computation procedure that can be used to compare mean costs between two or more time-varying treatment regimes. We highlight the relative advantages and limitations of this approach when compared with existing regression-based models. We illustrate the utility of this approach as a means to inform public policy by applying it to a simulated data example motivated by costs associated with cancer treatments. Simulations confirm that inference regarding intent-to-treat effects versus the joint causal effects estimated by the nested g-formula can lead to markedly different conclusions regarding differential costs. Therefore, it is essential to prespecify the desired target of inference when choosing between these two frameworks. The nested g-formula should be considered as a useful, complementary tool to existing methods when analyzing cost outcomes. Copyright © 2018 John Wiley & Sons, Ltd.

Cost-effectiveness analysis of malaria interventions using disability adjusted life years: a systematic review.

PubMed

Gunda, Resign; Chimbari, Moses John

2017-01-01

Malaria continues to be a public health problem despite past and on-going control efforts. For sustenance of control efforts to achieve the malaria elimination goal, it is important that the most cost-effective interventions are employed. This paper reviews studies on cost-effectiveness of malaria interventions using disability-adjusted life years. A review of literature was conducted through a literature search of international peer-reviewed journals as well as grey literature. Searches were conducted through Medline (PubMed), EMBASE and Google Scholar search engines. The searches included articles published in English for the period from 1996 to 2016. The inclusion criteria for the study were type of malaria intervention, year of publication and cost-effectiveness ratio in terms of cost per DALY averted. We included 40 studies which specifically used the DALY metric in cost-effectiveness analysis (CEA) of malaria interventions. The majority of the reviewed studies (75%) were done using data from African settings with the majority of the interventions (60.0%) targeting all age categories. Interventions included case treatment, prophylaxis, vector control, insecticide treated nets, early detection, environmental management, diagnosis and educational programmes. Sulfadoxine-pyrimethamine was the most common drug of choice in malaria prophylaxis, while artemisinin-based combination therapies were the most common drugs for case treatment. Based on guidelines for CEA, most interventions proved cost-effective in terms of cost per DALYs averted for each intervention. The DALY metric is a useful tool for determining the cost-effectiveness of malaria interventions. This paper demonstrates the importance of CEA in informing decisions made by policy makers.

Water Conservation Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ian Metzger, Jesse Dean

2010-12-31

This software requires inputs of simple water fixture inventory information and calculates the water/energy and cost benefits of various retrofit opportunities. This tool includes water conservation measures for: Low-flow Toilets, Low-flow Urinals, Low-flow Faucets, and Low-flow Showheads. This tool calculates water savings, energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

The cost of sustaining a patient-centered medical home: experience from 2 states.

PubMed

Magill, Michael K; Ehrenberger, David; Scammon, Debra L; Day, Julie; Allen, Tatiana; Reall, Andreu J; Sides, Rhonda W; Kim, Jaewhan

2015-09-01

As medical practices transform to patient-centered medical homes (PCMHs), it is important to identify the ongoing costs of maintaining these "advanced primary care" functions. A key required input is personnel effort. This study's objective was to assess direct personnel costs to practices associated with the staffing necessary to deliver PCMH functions as outlined in the National Committee for Quality Assurance Standards. We developed a PCMH cost dimensions tool to assess costs associated with activities uniquely required to maintain PCMH functions. We interviewed practice managers, nurse supervisors, and medical directors in 20 varied primary care practices in 2 states, guided by the tool. Outcome measures included categories of staff used to perform various PCMH functions, time and personnel costs, and whether practices were delivering PCMH functions. Costs per full-time equivalent primary care clinician associated with PCMH functions varied across practices with an average of $7,691 per month in Utah practices and $9,658 in Colorado practices. PCMH incremental costs per encounter were $32.71 in Utah and $36.68 in Colorado. The average estimated cost per member per month for an assumed panel of 2,000 patients was $3.85 in Utah and $4.83 in Colorado. Identifying costs of maintaining PCMH functions will contribute to effective payment reform and to sustainability of transformation. Maintenance and ongoing support of PCMH functions require additional time and new skills, which may be provided by existing staff, additional staff, or both. Adequate compensation for ongoing and substantial incremental costs is critical for practices to sustain PCMH functions. © 2015 Annals of Family Medicine, Inc.

The Cost of Sustaining a Patient-Centered Medical Home: Experience From 2 States

PubMed Central

Magill, Michael K.; Ehrenberger, David; Scammon, Debra L.; Day, Julie; Allen, Tatiana; Reall, Andreu J.; Sides, Rhonda W.; Kim, Jaewhan

2015-01-01

PURPOSE As medical practices transform to patient-centered medical homes (PCMHs), it is important to identify the ongoing costs of maintaining these “advanced primary care” functions. A key required input is personnel effort. This study’s objective was to assess direct personnel costs to practices associated with the staffing necessary to deliver PCMH functions as outlined in the National Committee for Quality Assurance Standards. METHODS We developed a PCMH cost dimensions tool to assess costs associated with activities uniquely required to maintain PCMH functions. We interviewed practice managers, nurse supervisors, and medical directors in 20 varied primary care practices in 2 states, guided by the tool. Outcome measures included categories of staff used to perform various PCMH functions, time and personnel costs, and whether practices were delivering PCMH functions. RESULTS Costs per full-time equivalent primary care clinician associated with PCMH functions varied across practices with an average of $7,691 per month in Utah practices and $9,658 in Colorado practices. PCMH incremental costs per encounter were $32.71 in Utah and $36.68 in Colorado. The average estimated cost per member per month for an assumed panel of 2,000 patients was $3.85 in Utah and $4.83 in Colorado. CONCLUSIONS Identifying costs of maintaining PCMH functions will contribute to effective payment reform and to sustainability of transformation. Maintenance and ongoing support of PCMH functions require additional time and new skills, which may be provided by existing staff, additional staff, or both. Adequate compensation for ongoing and substantial incremental costs is critical for practices to sustain PCMH functions. PMID:26371263

Experimental evaluation of tool run-out in micro milling

NASA Astrophysics Data System (ADS)

Attanasio, Aldo; Ceretti, Elisabetta

2018-05-01

This paper deals with micro milling cutting process focusing the attention on tool run-out measurement. In fact, among the effects of the scale reduction from macro to micro (i.e., size effects) tool run-out plays an important role. This research is aimed at developing an easy and reliable method to measure tool run-out in micro milling based on experimental tests and an analytical model. From an Industry 4.0 perspective this measuring strategy can be integrated into an adaptive system for controlling cutting forces, with the objective of improving the production quality, the process stability, reducing at the same time the tool wear and the machining costs. The proposed procedure estimates the tool run-out parameters from the tool diameter, the channel width, and the phase angle between the cutting edges. The cutting edge phase measurement is based on the force signal analysis. The developed procedure has been tested on data coming from micro milling experimental tests performed on a Ti6Al4V sample. The results showed that the developed procedure can be successfully used for tool run-out estimation.

Alternative Fuels Data Center: Natural Gas Vehicle Emissions

Science.gov Websites

, and Policy More Natural Gas Publications | All Publications Tools Vehicle Cost Calculator GREET Fleet Footprint Calculator Heavy-Duty Vehicle Emissions All Tools Vehicle Cost Calculator Choose a vehicle to compare fuel cost and emissions with a conventional vehicle. Select Fuel/Technology Electric Hybrid

Computational algorithm to evaluate product disassembly cost index

NASA Astrophysics Data System (ADS)

Zeid, Ibrahim; Gupta, Surendra M.

2002-02-01

Environmentally conscious manufacturing is an important paradigm in today's engineering practice. Disassembly is a crucial factor in implementing this paradigm. Disassembly allows the reuse and recycling of parts and products that reach their death after their life cycle ends. There are many questions that must be answered before a disassembly decision can be reached. The most important question is economical. The cost of disassembly versus the cost of scrapping a product is always considered. This paper develops a computational tool that allows decision-makers to calculate the disassembly cost of a product. The tool makes it simple to perform 'what if' scenarios fairly quickly. The tool is Web based and has two main parts. The front-end part is a Web page and runs on the client side in a Web browser, while the back-end part is a disassembly engine (servlet) that has disassembly knowledge and costing algorithms and runs on the server side. The tool is based on the client/server model that is pervasively utilized throughout the World Wide Web. An example is used to demonstrate the implementation and capabilities of the tool.

Using a map-based assessment tool for the development of cost-effective WFD river basin action programmes in a changing climate.

PubMed

Kaspersen, Bjarke Stoltze; Jacobsen, Torsten Vammen; Butts, Michael Brian; Jensen, Niels H; Boegh, Eva; Seaby, Lauren Paige; Müller, Henrik Gioertz; Kjaer, Tyge

2016-08-01

For the 2nd and 3rd river basin management cycles (2015-2027) of the Water Framework Directive (WFD), EU Member States are required to fully integrate climate change into the process of river basin management planning (RBMP). Complying with the main WFD objective of achieving 'good ecological status' in all water bodies in Denmark requires Programmes of Measures (PoMs) to reduce nitrogen (N) pollution from point and diffuse sources. Denmark is among the world's most intensively farmed countries and in spite of thirty years of significant policy actions to reduce diffuse nutrient emissions, there is still a need for further reductions. In addition, the impacts of climate change are projected to lead to a situation where nutrient loads will have to be reduced still further in comparison to current climate conditions. There is an urgent need to address this challenge in WFD action programmes in order to develop robust and cost-effective adaptation strategies for the next WFD RBMP cycles. The aim of this paper is to demonstrate and discuss how a map-based PoMs assessment tool can support the development of adaptive and cost-effective strategies to reduce N losses in the Isefjord and Roskilde Fjord River Basin in the north east of Denmark. The tool facilitates assessments of the application of agri-environmental measures that are targeted towards low retention agricultural areas, where limited or no surface and subsurface N reduction takes place. Effects of climate change on nitrate leaching were evaluated using the dynamic agro-ecosystem model 'Daisy'. Results show that nitrate leaching rates increase by approx. 25% under current management practices. This impact outweighs the expected total N reduction effect of Baseline 2015 and the first RBMP in the case study river basin. The particular PoMs investigated in our study show that WFD N reduction targets can be achieved by targeted land use changes on approx. 4% of the agricultural area under current climate conditions and approx. 9% of the agricultural area, when projected climate change impacts on nitrate leaching rates are included in the assessment. The study highlights the potential of the PoMs assessment tool to assist in evaluation of alternative WFD RBMP scenarios to achieve spatially targeted and cost-effective reductions of N loads at catchment scale in the context of a changing climate. Copyright © 2016 Elsevier Ltd. All rights reserved.

Knowledge-based assistance in costing the space station DMS

NASA Technical Reports Server (NTRS)

Henson, Troy; Rone, Kyle

1988-01-01

The Software Cost Engineering (SCE) methodology developed over the last two decades at IBM Systems Integration Division (SID) in Houston is utilized to cost the NASA Space Station Data Management System (DMS). An ongoing project to capture this methodology, which is built on a foundation of experiences and lessons learned, has resulted in the development of an internal-use-only, PC-based prototype that integrates algorithmic tools with knowledge-based decision support assistants. This prototype Software Cost Engineering Automation Tool (SCEAT) is being employed to assist in the DMS costing exercises. At the same time, DMS costing serves as a forcing function and provides a platform for the continuing, iterative development, calibration, and validation and verification of SCEAT. The data that forms the cost engineering database is derived from more than 15 years of development of NASA Space Shuttle software, ranging from low criticality, low complexity support tools to highly complex and highly critical onboard software.

DECISION-SUPPORT TOOLS FOR MANAGING WASTEWATER COLLECTION SYSTEMS

EPA Science Inventory

Wastewater collection systems are an extensive part of the nation's infrastructure. As these systems become older, more preventative maintenance and renewal are required. For municipalities to cost-effectively plan, organize, and implement this effort, they require improved inf...

Diesel Emissions Quantifier (DEQ)

EPA Pesticide Factsheets

.The Diesel Emissions Quantifier (Quantifier) is an interactive tool to estimate emission reductions and cost effectiveness. Publications EPA-420-F-13-008a (420f13008a), EPA-420-B-10-035 (420b10023), EPA-420-B-10-034 (420b10034)

Development of a large bus/small bus decision support tool

DOT National Transportation Integrated Search

2008-02-01

Transit managers continue to strive for greater operating efficiency while maintaining an appropriate balance between cost effectiveness and customer service. Over the past decade, the use of heavy-duty buses smaller than the traditional forty-foot v...

Ramp metering : procedure manual.

DOT National Transportation Integrated Search

2002-11-01

Ramp metering is a traffic management tool used to increase the efficiency and safety of the : traffic operations on freeways. It is one of the most cost effective ways of managing traffic flow. : It improves traffic flow on congested freeways and of...

Full-scale testing, production and cost analysis data for the advanced composite stabilizer for Boeing 737 aircraft. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

Aniversario, R. B.; Harvey, S. T.; Mccarty, J. E.; Parsons, J. T.; Peterson, D. C.; Pritchett, L. D.; Wilson, D. R.; Wogulis, E. R.

1983-01-01

The full scale ground test, ground vibration test, and flight tests conducted to demonstrate a composite structure stabilizer for the Boeing 737 aircraft and obtain FAA certification are described. Detail tools, assembly tools, and overall production are discussed. Cost analyses aspects covered include production costs, composite material usage factors, and cost comparisons.

Cost-effectiveness of point-of-care C-reactive protein testing to inform antibiotic prescribing decisions

PubMed Central

Oppong, Raymond; Jit, Mark; Smith, Richard D; Butler, Christopher C; Melbye, Hasse; Mölstad, Sigvard; Coast, Joanna

2013-01-01

Background Point-of-care C-reactive protein (POCCRP) is a biomarker of inflammation that offers clinicians a rapid POC test to guide antibiotic prescribing decisions for acute cough and lower respiratory tract infections (LRTI). However, evidence that POCCRP is cost-effective is limited, particularly outside experimental settings. Aim To assess the cost-effectiveness of POCCRP as a diagnostic tool for acute cough and LRTI from the perspective of the health service. Design and setting Observational study of the presentation, management, and outcomes of patients with acute cough and LRTI in primary care settings in Norway and Sweden. Method Using hierarchical regression, data were analysed in terms of the effect on antibiotic use, cost, and patient outcomes (symptom severity after 7 and 14 days, time to recovery, and EQ-5D), while controlling for patient characteristics (self-reported symptom severity, comorbidities, and health-related quality of life) at first attendance. Results POCCRP testing is associated with non-significant positive reductions in antibiotic prescribing (P = 0.078) and increased cost (P = 0.092). Despite the uncertainty, POCCRP testing is also associated with a cost per quality-adjusted life year (QALY) gain of €9391. At a willingness-to-pay threshold of €30 000 per QALY gained, there is a 70% probability of CRP being cost-effective. Conclusion POCCRP testing is likely to provide a cost-effective diagnostic intervention both in terms of reducing antibiotic prescribing and in terms of QALYs gained. PMID:23834883

Cost-effectiveness of preventing dental caries and full mouth dental reconstructions among Alaska Native children in the Yukon–Kuskokwim delta region of Alaska

PubMed Central

Atkins, Charisma Y.; Thomas, Timothy K.; Lenaker, Dane; Day, Gretchen M.; Hennessy, Thomas W.; Meltzer, Martin I.

2016-01-01

Objective We conducted a cost-effectiveness analysis of five specific dental interventions to help guide resource allocation. Methods We developed a spreadsheet-based tool, from the healthcare payer perspective, to evaluate the cost effectiveness of specific dental interventions that are currently used among Alaska Native children (6-60 months). Interventions included: water fluoridation, dental sealants, fluoride varnish, tooth brushing with fluoride toothpaste, and conducting initial dental exams on children <18 months of age. We calculated the cost-effectiveness ratio of implementing the proposed interventions to reduce the number of carious teeth and full mouth dental reconstructions (FMDRs) over 10 years. Results A total of 322 children received caries treatments completed by a dental provider in the dental chair, while 161 children received FMDRs completed by a dental surgeon in an operating room. The average cost of treating dental caries in the dental chair was $1,467 (~258,000 per year); while the cost of treating FMDRs was $9,349 (~1.5 million per year). All interventions were shown to prevent caries and FMDRs; however tooth brushing prevented the greatest number of caries at minimum and maximum effectiveness with 1,433 and 1,910, respectively. Tooth brushing also prevented the greatest number of FMDRs (159 and 211) at minimum and maximum effectiveness. Conclusions All of the dental interventions evaluated were shown to produce cost savings. However, the level of that cost saving is dependent on the intervention chosen. PMID:26990678

Decision science and cervical cancer.

PubMed

Cantor, Scott B; Fahs, Marianne C; Mandelblatt, Jeanne S; Myers, Evan R; Sanders, Gillian D

2003-11-01

Mathematical modeling is an effective tool for guiding cervical cancer screening, diagnosis, and treatment decisions for patients and policymakers. This article describes the use of mathematical modeling as outlined in five presentations from the Decision Science and Cervical Cancer session of the Second International Conference on Cervical Cancer held at The University of Texas M. D. Anderson Cancer Center, April 11-14, 2002. The authors provide an overview of mathematical modeling, especially decision analysis and cost-effectiveness analysis, and examples of how it can be used for clinical decision making regarding the prevention, diagnosis, and treatment of cervical cancer. Included are applications as well as theory regarding decision science and cervical cancer. Mathematical modeling can answer such questions as the optimal frequency for screening, the optimal age to stop screening, and the optimal way to diagnose cervical cancer. Results from one mathematical model demonstrated that a vaccine against high-risk strains of human papillomavirus was a cost-effective use of resources, and discussion of another model demonstrated the importance of collecting direct non-health care costs and time costs for cost-effectiveness analysis. Research presented indicated that care must be taken when applying the results of population-wide, cost-effectiveness analyses to reduce health disparities. Mathematical modeling can encompass a variety of theoretical and applied issues regarding decision science and cervical cancer. The ultimate objective of using decision-analytic and cost-effectiveness models is to identify ways to improve women's health at an economically reasonable cost. Copyright 2003 American Cancer Society.

Maternal influenza immunization in Malawi: Piloting a maternal influenza immunization program costing tool by examining a prospective program

PubMed Central

Pecenka, Clint; Munthali, Spy; Chunga, Paul; Levin, Ann; Morgan, Win; Lambach, Philipp; Bhat, Niranjan; Neuzil, Kathleen M.; Ortiz, Justin R.

2017-01-01

Background This costing study in Malawi is a first evaluation of a Maternal Influenza Immunization Program Costing Tool (Costing Tool) for maternal immunization. The tool was designed to help low- and middle-income countries plan for maternal influenza immunization programs that differ from infant vaccination programs because of differences in the target population and potential differences in delivery strategy or venue. Methods This analysis examines the incremental costs of a prospective seasonal maternal influenza immunization program that is added to a successful routine childhood immunization and antenatal care program. The Costing Tool estimates financial and economic costs for different vaccine delivery scenarios for each of the major components of the expanded immunization program. Results In our base scenario, which specifies a donated single dose pre-filled vaccine formulation, the total financial cost of a program that would reach 2.3 million women is approximately $1.2 million over five years. The economic cost of the program, including the donated vaccine, is $10.4 million over the same period. The financial and economic costs per immunized pregnancy are $0.52 and $4.58, respectively. Other scenarios examine lower vaccine uptake, reaching 1.2 million women, and a vaccine purchased at $2.80 per dose with an alternative presentation. Conclusion This study estimates the financial and economic costs associated with a prospective maternal influenza immunization program in a low-income country. In some scenarios, the incremental delivery cost of a maternal influenza immunization program may be as low as some estimates of childhood vaccination programs, assuming the routine childhood immunization and antenatal care systems are capable of serving as the platform for an additional vaccination program. However, purchasing influenza vaccines at the prices assumed in this analysis, instead of having them donated, is likely to be challenging for lower-income countries. This result should be considered as a starting point to understanding the costs of maternal immunization programs in low- and middle-income countries. PMID:29281710

Maternal influenza immunization in Malawi: Piloting a maternal influenza immunization program costing tool by examining a prospective program.

PubMed

Pecenka, Clint; Munthali, Spy; Chunga, Paul; Levin, Ann; Morgan, Win; Lambach, Philipp; Bhat, Niranjan; Neuzil, Kathleen M; Ortiz, Justin R; Hutubessy, Raymond

2017-01-01

This costing study in Malawi is a first evaluation of a Maternal Influenza Immunization Program Costing Tool (Costing Tool) for maternal immunization. The tool was designed to help low- and middle-income countries plan for maternal influenza immunization programs that differ from infant vaccination programs because of differences in the target population and potential differences in delivery strategy or venue. This analysis examines the incremental costs of a prospective seasonal maternal influenza immunization program that is added to a successful routine childhood immunization and antenatal care program. The Costing Tool estimates financial and economic costs for different vaccine delivery scenarios for each of the major components of the expanded immunization program. In our base scenario, which specifies a donated single dose pre-filled vaccine formulation, the total financial cost of a program that would reach 2.3 million women is approximately $1.2 million over five years. The economic cost of the program, including the donated vaccine, is $10.4 million over the same period. The financial and economic costs per immunized pregnancy are $0.52 and $4.58, respectively. Other scenarios examine lower vaccine uptake, reaching 1.2 million women, and a vaccine purchased at $2.80 per dose with an alternative presentation. This study estimates the financial and economic costs associated with a prospective maternal influenza immunization program in a low-income country. In some scenarios, the incremental delivery cost of a maternal influenza immunization program may be as low as some estimates of childhood vaccination programs, assuming the routine childhood immunization and antenatal care systems are capable of serving as the platform for an additional vaccination program. However, purchasing influenza vaccines at the prices assumed in this analysis, instead of having them donated, is likely to be challenging for lower-income countries. This result should be considered as a starting point to understanding the costs of maternal immunization programs in low- and middle-income countries.

Using Risk Assessment Methodologies to Meet Management Objectives

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2015-01-01

Current decision making involves numerous possible combinations of technology elements, safety and health issues, operational aspects and process considerations to satisfy program goals. Identifying potential risk considerations as part of the management decision making process provides additional tools to make more informed management decision. Adapting and using risk assessment methodologies can generate new perspectives on various risk and safety concerns that are not immediately apparent. Safety and operational risks can be identified and final decisions can balance these considerations with cost and schedule risks. Additional assessments can also show likelihood of event occurrence and event consequence to provide a more informed basis for decision making, as well as cost effective mitigation strategies. Methodologies available to perform Risk Assessments range from qualitative identification of risk potential, to detailed assessments where quantitative probabilities are calculated. Methodology used should be based on factors that include: 1) type of industry and industry standards, 2) tasks, tools, and environment 3) type and availability of data and 4) industry views and requirements regarding risk & reliability. Risk Assessments are a tool for decision makers to understand potential consequences and be in a position to reduce, mitigate or eliminate costly mistakes or catastrophic failures.

Continuous processing and the applications of online tools in pharmaceutical product manufacture: developments and examples.

PubMed

Ooi, Shing Ming; Sarkar, Srimanta; van Varenbergh, Griet; Schoeters, Kris; Heng, Paul Wan Sia

2013-04-01

Continuous processing and production in pharmaceutical manufacturing has received increased attention in recent years mainly due to the industries' pressing needs for more efficient, cost-effective processes and production, as well as regulatory facilitation. To achieve optimum product quality, the traditional trial-and-error method for the optimization of different process and formulation parameters is expensive and time consuming. Real-time evaluation and the control of product quality using an online process analyzer in continuous processing can provide high-quality production with very high-throughput at low unit cost. This review focuses on continuous processing and the application of different real-time monitoring tools used in the pharmaceutical industry for continuous processing from powder to tablets.

Simulation technology - A key to effective man-machine integration for future combat rotorcraft systems

NASA Technical Reports Server (NTRS)

Kerr, Andrew W.

1990-01-01

The utilization of advanced simulation technology in the development of the non-real-time MANPRINT design tools in the Army/NASA Aircrew-Aircraft Integration (A3I) program is described. A description is then given of the Crew Station Research and Development Facilities, the primary tool for the application of MANPRINT principles. The purpose of the A3I program is to develop a rational, predictive methodology for helicopter cockpit system design that integrates human factors engineering with other principles at an early stage in the development process, avoiding the high cost of previous system design methods. Enabling technologies such as the MIDAS work station are examined, and the potential of low-cost parallel-processing systems is indicated.

Calculation of genomic predicted transmitting abilities for bovine respiratory disease complex in Holsteins

USDA-ARS?s Scientific Manuscript database

Bovine Respiratory Disease Complex is a disease that is very costly to the dairy industry. Genomic selection may be an effective tool to improve host resistance to the pathogens that cause this disease. Use of genomic predicted transmitting abilities (GPTA) for selection has had a dramatic effect on...

A Better Way to Measure: New Survey Tool Gives Educators a Clear Picture of Professional Learning's Impact

ERIC Educational Resources Information Center

Blank, Rolf K.

2010-01-01

Just when educators are learning more about what constitutes effective professional development, a collaborative team of education researchers and practitioners have developed, tested, and implemented a cost-effective method of measuring and reporting on the quality of teacher professional development. The teacher professional development analysis…

Linear versus quadratic portfolio optimization model with transaction cost

NASA Astrophysics Data System (ADS)

Razak, Norhidayah Bt Ab; Kamil, Karmila Hanim; Elias, Siti Masitah

2014-06-01

Optimization model is introduced to become one of the decision making tools in investment. Hence, it is always a big challenge for investors to select the best model that could fulfill their goal in investment with respect to risk and return. In this paper we aims to discuss and compare the portfolio allocation and performance generated by quadratic and linear portfolio optimization models namely of Markowitz and Maximin model respectively. The application of these models has been proven to be significant and popular among others. However transaction cost has been debated as one of the important aspects that should be considered for portfolio reallocation as portfolio return could be significantly reduced when transaction cost is taken into consideration. Therefore, recognizing the importance to consider transaction cost value when calculating portfolio' return, we formulate this paper by using data from Shariah compliant securities listed in Bursa Malaysia. It is expected that, results from this paper will effectively justify the advantage of one model to another and shed some lights in quest to find the best decision making tools in investment for individual investors.

Integrated testing and verification system for research flight software

NASA Technical Reports Server (NTRS)

Taylor, R. N.

1979-01-01

The MUST (Multipurpose User-oriented Software Technology) program is being developed to cut the cost of producing research flight software through a system of software support tools. An integrated verification and testing capability was designed as part of MUST. Documentation, verification and test options are provided with special attention on real-time, multiprocessing issues. The needs of the entire software production cycle were considered, with effective management and reduced lifecycle costs as foremost goals.

Rapid molecular diagnostics for multi-drug resistant tuberculosis in India.

PubMed

Ramachandran, Rajeswari; Muniyandi, M

2018-03-01

Rapid molecular diagnostic methods help in the detection of TB and Rifampicin resistance. These methods detect TB early, are accurate and play a crucial role in reducing the burden of drug resistant tuberculosis. Areas covered: This review analyses rapid molecular diagnostic tools used in the diagnosis of MDR-TB in India, such as the Line Probe Assay and GeneXpert. We have discussed the burden of MDR-TB and the impact of recent diagnostic tools on case detection and treatment outcomes. This review also discusses the costs involved in establishing these new techniques in India. Expert commentary: Molecular methods have considerable advantages for the programmatic management of drug resistant TB. These include speed, standardization of testing, potentially high throughput and reduced laboratory biosafety requirements. There is a desperate need for India to adopt modern, rapid, molecular tools with point-of-care tests being currently evaluated. New molecular diagnostic tests appear to be cost effective and also help in detecting missing cases. There is enough evidence to support the scaling up of these new tools in India.

CLICK: The USGS Center for LIDAR Information Coordination & Knowledge

USGS Publications Warehouse

Menig, Jordan C.; Stoker, Jason M.

2007-01-01

While this technology has proven its use as a mapping tool - effective for generating bare earth DEMs at high resolutions (1-3 m) and with high vertical accuracies (15-18 cm) - obstacles remain for its application as a remote sensing tool: * The high cost of collecting LIDAR * The steep learning curve on research and application of using the entire point cloud * The challenges of discovering whether data exist for regions of interest

Cost-effectiveness analysis: role and implications.

PubMed

Marsden, G; Wonderling, D

2013-03-01

Cost-effectiveness analysis (CEA) is often misperceived to be a cost-cutting exercise. The intention of CEA is not to identify and implement cheap technologies, but rather those which offer maximum health gain, subject to available funds. Such analysis is crucial for decision making in health care, as tight budget constraints mean spending in one area of healthcare displaces spending elsewhere. Therefore in order to achieve the greatest health gain for the overall population, treatments must be selected which provide the greatest health gain within the available funds. The relevance of CEA in health care systems is explained, using varicose vein treatment in the UK NHS as an example. Treatment for varicose veins is often not commissioned to at a local level, most likely because it is misperceived to be a cosmetic problem. However, this view does not take into account the impact of quality of life. CEA balances costs against a quantitative measure of health related quality of life, and could therefore be used to determine whether it is cost-effective to provide varicose vein treatment. The current literature on the cost-effectiveness of varicose vein treatment is reviewed, and an overview of cost-effectiveness principles is provided. Concepts such as economic modelling, incremental cost-effectiveness ratios (ICERs), net monetary benefit (NMB) and sensitivity analysis are explained, using examples relevant to varicose veins where appropriate. This article explains how, far from cutting costs and sacrificing patient health, CEA provides a useful tool to maximise the health of the population in the face of ever tightening budget constraints. CEA could be used to compare the cost-effectiveness of the various treatment options for varicose veins, and efficiencies realised.

Second Life for Electric Vehicle Batteries: Answering Questions on Battery Degradation and Value

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neubauer, J. S.; Wood, E.; Pesaran, A.

2015-05-04

Battery second use – putting used plug-in electric vehicle (PEV) batteries into secondary service following their automotive tenure – has been proposed as a means to decrease the cost of PEVs while providing low cost energy storage to other fields (e.g. electric utility markets). To understand the value of used automotive batteries, however, we must first answer several key questions related to National Renewable Energy Laboratory (NREL) has developed a methodology and the requisite tools to answer these questions, including NREL’s Battery Lifetime Simulation Tool (BLAST). Herein we introduce these methods and tools, and demonstrate their application. We have foundmore » that capacity fade from automotive use has a much larger impact on second use value than resistance growth. Where capacity loss is driven by calendar effects more than cycling effects, average battery temperature during automotive service – which is often driven by climate – is found to be the single factor with the largest effect on remaining value. Installing hardware and software capabilities onboard the vehicle that can both infer remaining battery capacity from in-situ measurements, as well as track average battery temperature over time, will thereby facilitate the second use of automotive batteries.« less

[Cost analysis of ultrasound-guided transrectal needle biopsy in prostatic carcinoma].

PubMed

Bissoli, E; Fandella, A; La Torre, E; Faggiano, L; Anselmo, G; Frasson, F

1998-04-01

The literature mortality and morbidity rates from prostatic carcinoma prompt to the better use of some routine diagnostic tools such as transrectal ultrasound-guided biopsy. We evaluated the overall cost of transrectal ultrasound biopsy (TRUSB) of the prostate and investigated the economic impact of the procedures currently used to diagnose prostatic carcinoma. The total cost of TRUSB was calculated with reference to 247 procedures performed in 1996. The following cost factors were evaluated: personnel, materials, maintenance-equipment depreciation, energy consumption and hospital overheads. A literature review was also carried out to check if our extrapolated costs corresponded to those of other authors worldwide and to consider them in the wider framework of the cost effectiveness of the strategies for the early diagnosis of prostatic cancer. The overall cost of TRUSB was Itl. 249,000, obtained by adding together the costs of: personnel (Itl. 160,000); materials (Itl. 59,000); equipment maintenance and depreciation (Itl. 12,400); energy consumption (Itl. 100); hospital overheads (Itl. 17,500). The literature review points out TRUSB as a clinically invasive tool for diagnosing prostatic carcinoma whose cost-effectiveness is debated. Cadaver studies report the presence of cancer cells in the prostate of 50% of 70-year-old men, while extrapolations calculate a morbidity from prostatic carcinoma in 9.5% of 50-year-old men. It is therefore obvious that randomized prostatic biopsies, methods apart, are very likely to be positive. This probability varies with the patient's age, the level of prostate specific antigen (PSA), the density of PSA/cm3 of prostate volume (PSAD), and the positivity of exploration and/or transrectal ultrasound findings. Despite the strict application of all these criteria and the critical assessment of the patient's general conditions, TRUSB is indicated for 16% of the male population over 50, with obvious implications. It has been recently suggested that the ratio between free PSA (antigen fraction of the total serum PSA) and total PSA could be clinically useful as an effective predict of TRUSB positivity or negativity. Free PSA evaluation might thus help reduce the number of TRUSB.

Extension of an Object-Oriented Optimization Tool: User's Reference Manual

NASA Technical Reports Server (NTRS)

Pak, Chan-Gi; Truong, Samson S.

2015-01-01

The National Aeronautics and Space Administration Armstrong Flight Research Center has developed a cost-effective and flexible object-oriented optimization (O (sup 3)) tool that leverages existing tools and practices and allows easy integration and adoption of new state-of-the-art software. This object-oriented framework can integrate the analysis codes for multiple disciplines, as opposed to relying on one code to perform analysis for all disciplines. Optimization can thus take place within each discipline module, or in a loop between the O (sup 3) tool and the discipline modules, or both. Six different sample mathematical problems are presented to demonstrate the performance of the O (sup 3) tool. Instructions for preparing input data for the O (sup 3) tool are detailed in this user's manual.

Case and Administrative Support Tools

EPA Pesticide Factsheets

Case and Administrative Support Tools (CAST) is the secure portion of the Office of General Counsel (OGC) Dashboard business process automation tool used to help reduce office administrative labor costs while increasing employee effectiveness. CAST supports business functions which rely on and store Privacy Act sensitive data (PII). Specific business processes included in CAST (and respective PII) are: -Civil Rights Cast Tracking (name, partial medical history, summary of case, and case correspondance). -Employment Law Case Tracking (name, summary of case). -Federal Tort Claims Act Incident Tracking (name, summary of incidents). -Ethics Program Support Tools and Tracking (name, partial financial history). -Summer Honors Application Tracking (name, home address, telephone number, employment history). -Workforce Flexibility Initiative Support Tools (name, alternative workplace phone number). -Resource and Personnel Management Support Tools (name, partial employment and financial history).

Nanocomposites for Machining Tools

PubMed Central

Loginov, Pavel; Mishnaevsky, Leon; Levashov, Evgeny

2017-01-01

Machining tools are used in many areas of production. To a considerable extent, the performance characteristics of the tools determine the quality and cost of obtained products. The main materials used for producing machining tools are steel, cemented carbides, ceramics and superhard materials. A promising way to improve the performance characteristics of these materials is to design new nanocomposites based on them. The application of micromechanical modeling during the elaboration of composite materials for machining tools can reduce the financial and time costs for development of new tools, with enhanced performance. This article reviews the main groups of nanocomposites for machining tools and their performance. PMID:29027926

The Effects of Technology Innovativeness and System Exposure on Student Acceptance of E-Textbooks

ERIC Educational Resources Information Center

Ngafeeson, Madison N.; Sun, Jun

2015-01-01

The efforts of educators in the last three decades have, among other things, focused on the use of information technology (IT) in education. It has become commonplace to view information systems both as an effective carrier of course content as well as a cost-effective tool to improve student learning outcomes. One of such technologies is the…

Effects of an Infant-Focused Relationship-Based Hospital and Home Visiting Intervention on Reducing Symptoms of Postpartum Maternal Depression: A Pilot Study

ERIC Educational Resources Information Center

Nugent, J. Kevin; Bartlett, Jessica Dym; Valim, Clarissa

2014-01-01

Relationship-based interventions are an effective means for reducing postpartum depression (PPD), but few cost-effective tools that can be administered efficiently in medical and home settings are available or well-studied. This study examines the efficacy of the Newborn Behavioral Observations (NBO), an infant-centered relationship-based…

Cost-effectiveness simulation analysis of schizophrenia at the Instituto Mexicano del Seguro Social: Assessment of typical and atypical antipsychotics.

PubMed

Mould-Quevedo, Joaquín; Contreras-Hernández, Iris; Verduzco, Wáscar; Mejía-Aranguré, Juan Manuel; Garduño-Espinosa, Juan

2009-07-01

Estimation of the economic costs of schizophrenia is a fundamental tool for a better understanding of the magnitude of this health problem. The aim of this study was to estimate the costs and effectiveness of five antipsychotic treatments (ziprasidone, olanzapine, risperidone, haloperidol and clozapine), which are included in the national formulary at the Instituto Mexicano del Seguro Social, through a simulation model. Type of economic evaluation: complete economic evaluation of cost-effectiveness. direct medical costs. 1 year. Effectiveness measure: number of months free of psychotic symptoms. to estimate cost-effectiveness, a Markov model was constructed and a Monte Carlo simulation was carried out. Effectiveness: the results of the Markov model showed that the antipsychotic with the highest number months free of psychotic symptoms was ziprasidone (mean 9.2 months). The median annual costs for patients using ziprasidone included in the hypothetical cohort was 194,766.6 Mexican pesos (MXP) (95% CI, 26,515.6-363,017.6 MXP), with an exchange rate of 1 € = 17.36 MXP. The highest costs in the probabilistic analysis were estimated for clozapine treatment (260,236.9 MXP). Through a probabilistic analysis, ziprasidone showed the lowest costs and the highest number of months free of psychotic symptoms and was also the most costeffective antipsychotic observed in acceptability curves and net monetary benefits. Copyright © 2009 Sociedad Española de Psiquiatría and Sociedad Española de Psiquiatría Biológica. Published by Elsevier Espana. All rights reserved.

The Business Change Initiative: A Novel Approach to Improved Cost and Schedule Management

NASA Technical Reports Server (NTRS)

Shinn, Stephen A.; Bryson, Jonathan; Klein, Gerald; Lunz-Ruark, Val; Majerowicz, Walt; McKeever, J.; Nair, Param

2016-01-01

Goddard Space Flight Center's Flight Projects Directorate employed a Business Change Initiative (BCI) to infuse a series of activities coordinated to drive improved cost and schedule performance across Goddard's missions. This sustaining change framework provides a platform to manage and implement cost and schedule control techniques throughout the project portfolio. The BCI concluded in December 2014, deploying over 100 cost and schedule management changes including best practices, tools, methods, training, and knowledge sharing. The new business approach has driven the portfolio to improved programmatic performance. The last eight launched GSFC missions have optimized cost, schedule, and technical performance on a sustained basis to deliver on time and within budget, returning funds in many cases. While not every future mission will boast such strong performance, improved cost and schedule tools, management practices, and ongoing comprehensive evaluations of program planning and control methods to refine and implement best practices will continue to provide a framework for sustained performance. This paper will describe the tools, techniques, and processes developed during the BCI and the utilization of collaborative content management tools to disseminate project planning and control techniques to ensure continuous collaboration and optimization of cost and schedule management in the future.

Cockpit System Situational Awareness Modeling Tool

NASA Technical Reports Server (NTRS)

Keller, John; Lebiere, Christian; Shay, Rick; Latorella, Kara

2004-01-01

This project explored the possibility of predicting pilot situational awareness (SA) using human performance modeling techniques for the purpose of evaluating developing cockpit systems. The Improved Performance Research Integration Tool (IMPRINT) was combined with the Adaptive Control of Thought-Rational (ACT-R) cognitive modeling architecture to produce a tool that can model both the discrete tasks of pilots and the cognitive processes associated with SA. The techniques for using this tool to predict SA were demonstrated using the newly developed Aviation Weather Information (AWIN) system. By providing an SA prediction tool to cockpit system designers, cockpit concepts can be assessed early in the design process while providing a cost-effective complement to the traditional pilot-in-the-loop experiments and data collection techniques.

BMP analysis system for watershed-based stormwater management.

PubMed

Zhen, Jenny; Shoemaker, Leslie; Riverson, John; Alvi, Khalid; Cheng, Mow-Soung

2006-01-01

Best Management Practices (BMPs) are measures for mitigating nonpoint source (NPS) pollution caused mainly by stormwater runoff. Established urban and newly developing areas must develop cost effective means for restoring or minimizing impacts, and planning future growth. Prince George's County in Maryland, USA, a fast-growing region in the Washington, DC metropolitan area, has developed a number of tools to support analysis and decision making for stormwater management planning and design at the watershed level. These tools support watershed analysis, innovative BMPs, and optimization. Application of these tools can help achieve environmental goals and lead to significant cost savings. This project includes software development that utilizes GIS information and technology, integrates BMP processes simulation models, and applies system optimization techniques for BMP planning and selection. The system employs the ESRI ArcGIS as the platform, and provides GIS-based visualization and support for developing networks including sequences of land uses, BMPs, and stream reaches. The system also provides interfaces for BMP placement, BMP attribute data input, and decision optimization management. The system includes a stand-alone BMP simulation and evaluation module, which complements both research and regulatory nonpoint source control assessment efforts, and allows flexibility in the examining various BMP design alternatives. Process based simulation of BMPs provides a technique that is sensitive to local climate and rainfall patterns. The system incorporates a meta-heuristic optimization technique to find the most cost-effective BMP placement and implementation plan given a control target, or a fixed cost. A case study is presented to demonstrate the application of the Prince George's County system. The case study involves a highly urbanized area in the Anacostia River (a tributary to Potomac River) watershed southeast of Washington, DC. An innovative system of management practices is proposed to minimize runoff, improve water quality, and provide water reuse opportunities. Proposed management techniques include bioretention, green roof, and rooftop runoff collection (rain barrel) systems. The modeling system was used to identify the most cost-effective combinations of management practices to help minimize frequency and size of runoff events and resulting combined sewer overflows to the Anacostia River.

Landfill Gas Energy Cost Model Version 3.0 (LFGcost-Web V3.0)

EPA Science Inventory

To help stakeholders estimate the costs of a landfill gas (LFG) energy project, in 2002, LMOP developed a cost tool (LFGcost). Since then, LMOP has routinely updated the tool to reflect changes in the LFG energy industry. Initially the model was designed for EPA to assist landfil...

A Cost Estimation Tool for Charter Schools

ERIC Educational Resources Information Center

Hayes, Cheryl D.; Keller, Eric

2009-01-01

To align their financing strategies and fundraising efforts with their fiscal needs, charter school leaders need to know how much funding they need and what that funding will support. This cost estimation tool offers a simple set of worksheets to help start-up charter school operators identify and estimate the range of costs and timing of…

48 CFR 31.205-40 - Special tooling and special test equipment costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Special tooling and special test equipment costs. 31.205-40 Section 31.205-40 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 31.205-40...

Patient, surgeon, and healthcare purchaser views on the use of decision and communication aids in orthopaedic surgery: a mixed methods study.

PubMed

Bozic, Kevin J; Chenok, Kate Eresian; Schindel, Jennifer; Chan, Vanessa; Huddleston, James I; Braddock, Clarence; Belkora, Jeffrey

2014-08-31

Despite evidence that decision and communication aids are effective for enhancing the quality of preference-sensitive decisions, their adoption in the field of orthopaedic surgery has been limited. The purpose of this mixed-methods study was to evaluate the perceived value of decision and communication aids among different healthcare stakeholders. Patients with hip or knee arthritis, orthopaedic surgeons who perform hip and knee replacement procedures, and a group of large, self-insured employers (healthcare purchasers) were surveyed regarding their views on the value of decision and communication aids in orthopaedics. Patients with hip or knee arthritis who participated in a randomized controlled trial involving decision and communication aids were asked to complete an online survey about what was most and least beneficial about each of the tools they used, the ideal mode of administration of these tools and services, and their interest in receiving comparable materials and services in the future. A subset of these patients were invited to participate in a telephone interview, where there were asked to rank and attribute a monetary value to the interventions. These interviews were analyzed using a qualitative and mixed methods analysis software. Members of the American Hip and Knee Surgeons (AAHKS) were surveyed on their perceptions and usage of decision and communication aids in orthopaedic practice. Healthcare purchasers were interviewed about their perspectives on patient-oriented decision support. All stakeholders saw value in decision and communication aids, with the major barrier to implementation being cost. Both patients and surgeons would be willing to bear at least part of the cost of implementing these tools, while employers felt health plans should be responsible for shouldering the costs. Decision and communication aids can be effective tools for incorporating patients preferences and values into preference-sensitive decisions in orthopaedics. Future efforts should be aimed at assessing strategies for efficient implementation of these tools into widespread orthopaedic practice.

Cost-effectiveness analyses: Beauty and the beast?

PubMed

Cutter, Gary R; Wang, Guoqiao

2013-10-01

In this issue of Neurology ® Clinical Practice , Young et al. 1 discuss 5 things to consider in reading a cost-effectiveness or decision analysis study. Such studies are necessary as the medical profession wrestles with caring for patients and paying for that care. The approaches discussed by Young et al. are important to digest as this type of study will be more prevalent as pressures mount in all aspects of clinical and comprehensive care. Young et al. point out the need to interpret the models and understand the meaning of the data presented. Their article provides an excellent summary of the tools and approaches widely used by policymakers and researchers, bringing some systematic evaluation to the pressures of cost vs the benefits of therapy.

Energy Sector Security through a System for Intelligent, Learning Network Configuration Monitoring and Management (“Essence”)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Craig; Larmouth, Robert

The project was conceived and executed with the overarching objective to provide cost effective tools to cooperative utilities that enabled them to quickly detect, characterize and take remediative action against cyber attacks.

Risk Costs for New Dams: Economic Analysis and Effects of Monitoring

NASA Astrophysics Data System (ADS)

Paté-Cornell, M. Elisabeth; Tagaras, George

1986-01-01

This paper presents new developments and illustrations of the introduction of risk and costs in cost-benefit analysis for new dams. The emphasis is on a method of evaluation of the risk costs based on the structure of the local economy. Costs to agricultural property as well as residential, commercial, industrial, and public property are studied in detail. Of particular interest is the case of sequential dam failure and the evaluation of the risk costs attributable to a new dam upstream from an existing one. Three real cases are presented as illustrations of the method: the Auburn Dam, the Dickey-Lincoln School Project, and the Teton Dam, which failed in 1976. This last case provides a calibration tool for the estimation of loss ratios. For these three projects, the risk-modified benefit-cost ratios are computed to assess the effect of the risk on the economic performance of the project. The role of a warning system provided by systematic monitoring of the dam is analyzed: by reducing the risk costs, the warning system attenuates their effect on the benefit-cost ratio. The precursors, however, can be missed or misinterpreted: monitoring does not guarantee that the risks to human life can be reduced to zero. This study shows, in particular, that it is critical to consider the risk costs in the decision to build a new dam when the flood area is large and densely populated.

Cutting costs: the impact of price lists on the cost development at the emergency department.

PubMed

Schilling, Ulf Martin

2010-12-01

It was shown that physicians working at the Swedish emergency department (ED) are unaware of the costs for investigations performed. This study evaluated the possible impact of price lists on the overall laboratory and radiology costs at the ED of a Swedish university hospital. Price lists including the most common laboratory analyses and radiological investigations at the ED were created. The lists were distributed to all internal medicine physicians by e-mail and exposed above their working stations continually. No lists were provided for the orthopaedic control group. The average costs for laboratory and radiological investigations during the months of June and July 2007 and 2008 were calculated. Neither clinical nor admission procedures were changed. The physicians were blinded towards the study. Statistical analysis was performed using the Student's t-test. A total of 1442 orthopaedic and 1585 medical patients were attended to in 2007. In 2008, 1467 orthopaedic and 1637 medical patients required emergency service. The average costs per patient were 980.27 SKR (98€)/999.41 SKR (100€, +1.95%) for orthopaedic and 1081.36 SKR (108€)/877.3 SKR (88€, -18.8%) for medical patients. Laboratory costs decreased by 9% in orthopaedic and 21.4% in medical patients. Radiology costs changed +5.4% in orthopaedic and -20.59% in medical patients. The distribution and promotion of price lists as a tool at the ED to heighten cost awareness resulted in a major decrease in the investigation costs. A significant decrease in radiological costs could be observed. It can be concluded that price lists are an effective tool to cut costs in public healthcare.

Cost analysis of the development and implementation of a spatial decision support system for malaria elimination in Solomon Islands.

PubMed

Marston, Luke; Kelly, Gerard C; Hale, Erick; Clements, Archie C A; Hodge, Andrew; Jimenez-Soto, Eliana

2014-08-18

The goal of malaria elimination faces numerous challenges. New tools are required to support the scale up of interventions and improve national malaria programme capacity to conduct detailed surveillance. This study investigates the cost factors influencing the development and implementation of a spatial decision support system (SDSS) for malaria elimination in the two elimination provinces of Isabel and Temotu, Solomon Islands. Financial and economic costs to develop and implement a SDSS were estimated using the Solomon Islands programme's financial records. Using an ingredients approach, verified by stakeholders and operational reports, total costs for each province were quantified. A budget impact sensitivity analysis was conducted to investigate the influence of variations in standard budgetary components on the costs and to identify potential cost savings. A total investment of US$ 96,046 (2012 constant dollars) was required to develop and implement the SDSS in two provinces (Temotu Province US$ 49,806 and Isabel Province US$ 46,240). The single largest expense category was for computerized equipment totalling approximately US$ 30,085. Geographical reconnaissance was the most expensive phase of development and implementation, accounting for approximately 62% of total costs. Sensitivity analysis identified different cost factors between the provinces. Reduced equipment costs would deliver a budget saving of approximately 10% in Isabel Province. Combined travel costs represented the greatest influence on the total budget in the more remote Temotu Province. This study provides the first cost analysis of an operational surveillance tool used specifically for malaria elimination in the South-West Pacific. It is demonstrated that the costs of such a decision support system are driven by specialized equipment and travel expenses. Such factors should be closely scrutinized in future programme budgets to ensure maximum efficiencies are gained and available resources are allocated effectively.

Climate targets and cost-effective climate stabilization pathways

NASA Astrophysics Data System (ADS)

Held, H.

2015-08-01

Climate economics has developed two main tools to derive an economically adequate response to the climate problem. Cost benefit analysis weighs in any available information on mitigation costs and benefits and thereby derives an "optimal" global mean temperature. Quite the contrary, cost effectiveness analysis allows deriving costs of potential policy targets and the corresponding cost- minimizing investment paths. The article highlights pros and cons of both approaches and then focusses on the implications of a policy that strives at limiting global warming to 2 °C compared to pre-industrial values. The related mitigation costs and changes in the energy sector are summarized according to the IPCC report of 2014. The article then points to conceptual difficulties when internalizing uncertainty in these types of analyses and suggests pragmatic solutions. Key statements on mitigation economics remain valid under uncertainty when being given the adequate interpretation. Furthermore, the expected economic value of perfect climate information is found to be on the order of hundreds of billions of Euro per year if a 2°-policy were requested. Finally, the prospects of climate policy are sketched.

Cost-effectiveness of human papillomavirus vaccination in the United States.

PubMed

Chesson, Harrell W; Ekwueme, Donatus U; Saraiya, Mona; Markowitz, Lauri E

2008-02-01

We describe a simplified model, based on the current economic and health effects of human papillomavirus (HPV), to estimate the cost-effectiveness of HPV vaccination of 12-year-old girls in the United States. Under base-case parameter values, the estimated cost per quality-adjusted life year gained by vaccination in the context of current cervical cancer screening practices in the United States ranged from $3,906 to $14,723 (2005 US dollars), depending on factors such as whether herd immunity effects were assumed; the types of HPV targeted by the vaccine; and whether the benefits of preventing anal, vaginal, vulvar, and oropharyngeal cancers were included. The results of our simplified model were consistent with published studies based on more complex models when key assumptions were similar. This consistency is reassuring because models of varying complexity will be essential tools for policy makers in the development of optimal HPV vaccination strategies.

The Value of Decision Analytical Modeling in Surgical Research: An Example of Laparoscopic Versus Open Distal Pancreatectomy.

PubMed

Tax, Casper; Govaert, Paulien H M; Stommel, Martijn W J; Besselink, Marc G H; Gooszen, Hein G; Rovers, Maroeska M

2017-11-02

To illustrate how decision modeling may identify relevant uncertainty and can preclude or identify areas of future research in surgery. To optimize use of research resources, a tool is needed that assists in identifying relevant uncertainties and the added value of reducing these uncertainties. The clinical pathway for laparoscopic distal pancreatectomy (LDP) versus open (ODP) for nonmalignant lesions was modeled in a decision tree. Cost-effectiveness based on complications, hospital stay, costs, quality of life, and survival was analyzed. The effect of existing uncertainty on the cost-effectiveness was addressed, as well as the expected value of eliminating uncertainties. Based on 29 nonrandomized studies (3.701 patients) the model shows that LDP is more cost-effective compared with ODP. Scenarios in which LDP does not outperform ODP for cost-effectiveness seem unrealistic, e.g., a 30-day mortality rate of 1.79 times higher after LDP as compared with ODP, conversion in 62.2%, surgically repair of incisional hernias in 21% after LDP, or an average 2.3 days longer hospital stay after LDP than after ODP. Taking all uncertainty into account, LDP remained more cost-effective. Minimizing these uncertainties did not change the outcome. The results show how decision analytical modeling can help to identify relevant uncertainty and guide decisions for future research in surgery. Based on the current available evidence, a randomized clinical trial on complications, hospital stay, costs, quality of life, and survival is highly unlikely to change the conclusion that LDP is more cost-effective than ODP.

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

NASA Astrophysics Data System (ADS)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

Experiences of operational costs of HPV vaccine delivery strategies in Gavi-supported demonstration projects.

PubMed

Botwright, Siobhan; Holroyd, Taylor; Nanda, Shreya; Bloem, Paul; Griffiths, Ulla K; Sidibe, Anissa; Hutubessy, Raymond C W

2017-01-01

From 2012 to 2016, Gavi, the Vaccine Alliance, provided support for countries to conduct small-scale demonstration projects for the introduction of the human papillomavirus vaccine, with the aim of determining which human papillomavirus vaccine delivery strategies might be effective and sustainable upon national scale-up. This study reports on the operational costs and cost determinants of different vaccination delivery strategies within these projects across twelve countries using a standardized micro-costing tool. The World Health Organization Cervical Cancer Prevention and Control Costing Tool was used to collect costing data, which were then aggregated and analyzed to assess the costs and cost determinants of vaccination. Across the one-year demonstration projects, the average economic and financial costs per dose amounted to US$19.98 (standard deviation ±12.5) and US$8.74 (standard deviation ±5.8), respectively. The greatest activities representing the greatest share of financial costs were social mobilization at approximately 30% (range, 6-67%) and service delivery at about 25% (range, 3-46%). Districts implemented varying combinations of school-based, facility-based, or outreach delivery strategies and experienced wide variation in vaccine coverage, drop-out rates, and service delivery costs, including transportation costs and per diems. Size of target population, number of students per school, and average length of time to reach an outreach post influenced cost per dose. Although the operational costs from demonstration projects are much higher than those of other routine vaccine immunization programs, findings from our analysis suggest that HPV vaccination operational costs will decrease substantially for national introduction. Vaccination costs may be decreased further by annual vaccination, high initial investment in social mobilization, or introducing/strengthening school health programs. Our analysis shows that drivers of cost are dependent on country and district characteristics. We therefore recommend that countries carry out detailed planning at the national and district levels to define a sustainable strategy for national HPV vaccine roll-out, in order to achieve the optimal balance between coverage and cost.

Expenditure and value for money: the challenge of implantable cardioverter defibrillators.

PubMed

Boriani, G; Biffi, M; Martignani, C; Diemberger, I; Valzania, C; Bertini, M; Branzi, A

2009-05-01

Many technology-driven interventions entail considerable financial cost, raising affordability issues. The implantable cardioverter defibrillator (ICD) is a case of an effective primary prevention intervention with high initial costs that is capable of delivering long-term population benefits. At first glance, such interventions may provoke diffidence, if not active resistance, due to the financial burdens which inevitably accompany their widespread adoption. In this article, we review the available economic tools that can help address the ICD cost issue. We think awareness of such knowledge may facilitate dialogues between physicians, administrators and policymakers, and help foster rational decision-making.

Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Schwam; John F. Wallace; Quanyou Zhou

2002-01-30

An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

A one-year economic evaluation of six alternative strategies in the management of uninvestigated upper gastrointestinal symptoms in Canadian primary care.

PubMed

Barkun, Alan N; Crott, Ralph; Fallone, Carlo A; Kennedy, Wendy A; Lachaine, Jean; Levinton, Carey; Armstrong, David; Chiba, Naoki; Thomson, Alan; Veldhuyzen van Zanten, Sander; Sinclair, Paul; Escobedo, Sergio; Chakraborty, Bijan; Smyth, Sandra; White, Robert; Kalra, Helen; Nevin, Krista

2010-08-01

The cost-effectiveness of initial strategies in managing Canadian patients with uninvestigated upper gastrointestinalsymptoms remains controversial. To assess the cost-effectiveness of six management approaches to uninvestigated upper gastrointestinal symptoms in the Canadian setting. The present study analyzed data from four randomized trials assessing homogeneous and complementary populations of Canadian patients with uninvestigated upper gastrointestinal symptoms with comparable outcomes. Symptom-free months, qualityadjusted life-years (QALYs) and direct costs in Canadian dollars of two management approaches based on the Canadian Dyspepsia Working Group (CanDys) Clinical Management Tool, and four additional strategies (two empirical antisecretory agents, and two prompt endoscopy) were examined and compared. Prevalence data, probabilities, utilities and costs were included in a Markov model, while sensitivity analysis used Monte Carlo simulations. Incremental cost-effectiveness ratios and cost-effectiveness acceptability curves were determined. Empirical omeprazole cost $226 per QALY ($49 per symptom-free month) per patient. CanDys omeprazole and endoscopy approaches were more effective than empirical omeprazole, but more costly. Alternatives using H2-receptor antagonists were less effective than those using a proton pump inhibitor. No significant differences were found for most incremental cost-effectiveness ratios. As willingness to pay (WTP) thresholds rose from $226 to $24,000 per QALY, empirical antisecretory approaches were less likely to be the most costeffective choice, with CanDys omeprazole progressively becoming a more likely option. For WTP values ranging from $24,000 to $70,000 per QALY, the most clinically relevant range, CanDys omeprazole was the most cost-effective strategy (32% to 46% of the time), with prompt endoscopy-proton pump inhibitor favoured at higher WTP values. Although no strategy was the indisputable cost effective option, CanDys omeprazole may be the strategy of choiceover a clinically relevant range of WTP assumptions in the initial management of Canadian patients with uninvestigated dyspepsia.

CORSSTOL: Cylinder Optimization of Rings, Skin, and Stringers with Tolerance sensitivity

NASA Technical Reports Server (NTRS)

Finckenor, J.; Bevill, M.

1995-01-01

Cylinder Optimization of Rings, Skin, and Stringers with Tolerance (CORSSTOL) sensitivity is a design optimization program incorporating a method to examine the effects of user-provided manufacturing tolerances on weight and failure. CORSSTOL gives designers a tool to determine tolerances based on need. This is a decisive way to choose the best design among several manufacturing methods with differing capabilities and costs. CORSSTOL initially optimizes a stringer-stiffened cylinder for weight without tolerances. The skin and stringer geometry are varied, subject to stress and buckling constraints. Then the same analysis and optimization routines are used to minimize the maximum material condition weight subject to the least favorable combination of tolerances. The adjusted optimum dimensions are provided with the weight and constraint sensitivities of each design variable. The designer can immediately identify critical tolerances. The safety of parts made out of tolerance can also be determined. During design and development of weight-critical systems, design/analysis tools that provide product-oriented results are of vital significance. The development of this program and methodology provides designers with an effective cost- and weight-saving design tool. The tolerance sensitivity method can be applied to any system defined by a set of deterministic equations.

Guidelines for appropriate care: the importance of empirical normative analysis.

PubMed

Berg, M; Meulen, R T; van den Burg, M

2001-01-01

The Royal Dutch Medical Association recently completed a research project aimed at investigating how guidelines for 'appropriate medical care' should be construed. The project took as a starting point that explicit attention should be given to ethical and political considerations in addition to data about costs and effectiveness. In the project, two research groups set out to design guidelines and cost-effectiveness analyses (CEAs) for two circumscribed medical areas (angina pectoris and major depression). Our third group was responsible for the normative analysis. We undertook an explorative, qualitative pilot study of the normative considerations that played a role in constructing the guidelines and CEAs, and simultaneously interviewed specialists about the normative considerations that guided their diagnostic and treatment decisions. Explicating normative considerations, we argue, is important democratically: the issues at stake should not be left to decision analysts and guideline developers to decide. Moreover, it is a necessary condition for a successful implementation of such tools: those who draw upon these tools will only accept them when they can recognize themselves in the considerations implied. Empirical normative analysis, we argue, is a crucial tool in developing guidelines for appropriate medical care.

Creating an effort tracking tool to improve therapeutic cancer clinical trials workload management and budgeting.

PubMed

James, Pam; Bebee, Patty; Beekman, Linda; Browning, David; Innes, Mathew; Kain, Jeannie; Royce-Westcott, Theresa; Waldinger, Marcy

2011-11-01

Quantifying data management and regulatory workload for clinical research is a difficult task that would benefit from a robust tool to assess and allocate effort. As in most clinical research environments, The University of Michigan Comprehensive Cancer Center (UMCCC) Clinical Trials Office (CTO) struggled to effectively allocate data management and regulatory time with frequently inaccurate estimates of how much time was required to complete the specific tasks performed by each role. In a dynamic clinical research environment in which volume and intensity of work ebbs and flows, determining requisite effort to meet study objectives was challenging. In addition, a data-driven understanding of how much staff time was required to complete a clinical trial was desired to ensure accurate trial budget development and effective cost recovery. Accordingly, the UMCCC CTO developed and implemented a Web-based effort-tracking application with the goal of determining the true costs of data management and regulatory staff effort in clinical trials. This tool was developed, implemented, and refined over a 3-year period. This article describes the process improvement and subsequent leveling of workload within data management and regulatory that enhanced the efficiency of UMCCC's clinical trials operation.

The EPSA Project Finance Mapping Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadley, Stanton W.; Chinthavali, Supriya

The Energy Policy and Systems Analysis Office of DOE has requested a tool to compare the impact of various Federal policies on the financial viability of generation resources across the country. Policy options could include production tax credits, investment tax credits, solar renewable energy credits, tax abatement, accelerated depreciation, tax-free loans, and others. The tool would model the finances of projects in all fifty states, and possibly other geographic units like utility service territories and RTO/ISO territories. The tool would consider the facility s cost, financing, production, and revenues under different capital and market structures to determine things like levelizedmore » cost of energy, return on equity, and cost impacts on others (e.g., load-serving entities, society.) The tool would compare the cost and value of the facility to the local regional alternatives to determine how and where policy levers may provide sufficient incremental value to motivate investment. The results will be displayed through a purpose-built visualization that maps geographic variations and shows associated figures and tables.« less

Tools for developing a quality management program: proactive tools (process mapping, value stream mapping, fault tree analysis, and failure mode and effects analysis).

PubMed

Rath, Frank

2008-01-01

This article examines the concepts of quality management (QM) and quality assurance (QA), as well as the current state of QM and QA practices in radiotherapy. A systematic approach incorporating a series of industrial engineering-based tools is proposed, which can be applied in health care organizations proactively to improve process outcomes, reduce risk and/or improve patient safety, improve through-put, and reduce cost. This tool set includes process mapping and process flowcharting, failure modes and effects analysis (FMEA), value stream mapping, and fault tree analysis (FTA). Many health care organizations do not have experience in applying these tools and therefore do not understand how and when to use them. As a result there are many misconceptions about how to use these tools, and they are often incorrectly applied. This article describes these industrial engineering-based tools and also how to use them, when they should be used (and not used), and the intended purposes for their use. In addition the strengths and weaknesses of each of these tools are described, and examples are given to demonstrate the application of these tools in health care settings.

Examining the cost-effectiveness of cancer screening promotion.

PubMed

Andersen, M Robyn; Urban, Nicole; Ramsey, Scott; Briss, Peter A

2004-09-01

Cost-effectiveness analyses (CEAs) can help to quantify the contribution of the promotion of a screening program to increased participation in screening. The cost-effectiveness (C/E) of screening promotion depends in large part on the endpoints of interest. At the most fundamental level, the C/E of a strategy for promoting screening would focus on the attendance rate, or cost per person screened, and the C/E would be influenced by the costs of promotion, as well as by the size and responsiveness of the target population. In addition, the costs of screening promotion (measured as the cost per additional participant in screening) can be included in a CEA estimate of the screening technology. In this case, depending on the efficacy of the screening test and the costs and influence of the promotion, the C/E of screening may improve or become poorer. In the current study, the authors reviewed the literature on the C/E of cancer screening promotion. The following lessons were learned regarding the C/E of screening and its promotion: 1) high-quality information on the C/E of screening is increasingly available; 2) cost-effective promotion of screening is dependent on cost-effective screening strategies; 3) quality-of-life effects may be important in assessing the overall C/E of screening programs; 4) research efforts aimed at identifying cost-effective approaches to screening promotion are useful but sparse; 5) C/E studies should be better incorporated into well designed effectiveness research efforts; 6) variations in C/E according to intervention characteristics, population characteristics, and context should be evaluated in greater depth; 7) the long-term effects of screening promotion are critical to assessing C/E; 8) the effects of promotion on costs of screening must be better understood; and 9) CEA must be interpreted in light of other information. The authors showed that CEA can be a valuable tool for understanding the merits of health promotion interventions and that CEA is particularly valuable in identifying screening strategies that might be promoted most cost-effectively.

Provision of hearing aids to children in Bangladesh: costs and cost-effectiveness of a community-based and a centre-based approach.

PubMed

Ekman, Björn; Borg, Johan

2017-08-01

The aim of this study is to provide evidence on the costs and health effects of two alternative hearing aid delivery models, a community-based and a centre-based approach. The study is set in Bangladesh and the study population is children between 12 and 18 years old. Data on resource use by participants and their caregivers were collected by a household survey. Follow-up data were collected after two months. Data on the costs to providers of the two approaches were collected by means of key informant interviews. The total cost per participant in the community-based model was BDT 6,333 (USD 79) compared with BDT 13,718 (USD 172) for the centre-based model. Both delivery models are found to be cost-effective with an estimated cost per DALY averted of BDT 17,611 (USD 220) for the community-based model and BDT 36,775 (USD 460) for the centre-based model. Using a community-based approach to deliver hearing aids to children in a resource constrained environment is a cost-effective alternative to the traditional centre-based approach. Further evidence is needed to draw conclusions for scale-up of approaches; rigorous analysis is possible using well-prepared data collection tools and working closely with sector professionals. Implications for Rehabilitation Delivery models vary by resources needed for their implementation. Community-based deliver models of hearing aids to children in low-income countries are a cost-effective alternative. The assessment of costs and effects of hearing aids delivery models in low-income countries is possible through planned collaboration between researchers and sector professionals.

Measuring the costs and benefits of conservation programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Einhorn, M.A.

1985-07-25

A step-by-step analysis of the effects of utility-sponsored conservation promoting programs begins by identifying several factors which will reduce a program's effectiveness. The framework for measuring cost savings and designing a conservation program needs to consider the size of appliance subsidies, what form incentives should take, and how will customer behavior change as a result of incentives. Continual reevaluation is necessary to determine whether to change the size of rebates or whether to continue the program. Analytical tools for making these determinations are improving as conceptual breakthroughs in econometrics permit more rigorous analysis. 5 figures.

The economic value of remote sensing of earth resources from space: An ERTS overview and the value of continuity of service. Volume 6: Land use. Part 2: The role of ERTS in the establishment and updating of a nationwide land cover information system

NASA Technical Reports Server (NTRS)

Christie, R. J.

1974-01-01

The utility of an ERS system as an effective tool in land use management is analyzed. The cost effectiveness of satellites as a component of an ERS system is presented based on various projected levels of demand. It is indicated that a cost savings potential of $7.9 to $37.1 million annually is attributable to the inclusion of ERS-like satellites in the ERTS system.

System-level perturbations of cell metabolism using CRISPR/Cas9

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakočiūnas, Tadas; Jensen, Michael K.; Keasling, Jay D.

CRISPR/Cas9 (clustered regularly interspaced palindromic repeats and the associated protein Cas9) techniques have made genome engineering and transcriptional reprogramming studies much more advanced and cost-effective. For metabolic engineering purposes, the CRISPR-based tools have been applied to single and multiplex pathway modifications and transcriptional regulations. The effectiveness of these tools allows researchers to implement genome-wide perturbations, test model-guided genome editing strategies, and perform transcriptional reprogramming perturbations in a more advanced manner than previously possible. In this mini-review we highlight recent studies adopting CRISPR/Cas9 for systems-level perturbations and model-guided metabolic engineering.

A web-based nutrition program reduces health care costs in employees with cardiac risk factors: before and after cost analysis.

PubMed

Sacks, Naomi; Cabral, Howard; Kazis, Lewis E; Jarrett, Kelli M; Vetter, Delia; Richmond, Russell; Moore, Thomas J

2009-10-23

Rising health insurance premiums represent a rapidly increasing burden on employer-sponsors of health insurance and their employees. Some employers have become proactive in managing health care costs by providing tools to encourage employees to directly manage their health and prevent disease. One example of such a tool is DASH for Health, an Internet-based nutrition and exercise behavior modification program. This program was offered as a free, opt-in benefit to US-based employees of the EMC Corporation. The aim was to determine whether an employer-sponsored, Internet-based diet and exercise program has an effect on health care costs. There were 15,237 total employees and spouses who were included in our analyses, of whom 1967 enrolled in the DASH for Health program (DASH participants). Using a retrospective, quasi-experimental design, study year health care costs among DASH participants and non-participants were compared, controlling for baseline year costs, risk, and demographic variables. The relationship between how often a subject visited the DASH website and health care costs also was examined. These relationships were examined among all study subjects and among a subgroup of 735 subjects with cardiovascular conditions (diabetes, hypertension, hyperlipidemia). Multiple linear regression analysis examined the relationship of program use to health care costs, comparing study year costs among DASH participants and non-participants and then examining the effects of increased website use on health care costs. Analyses were repeated among the cardiovascular condition subgroups. Overall, program use was not associated with changes in health care costs. However, among the cardiovascular risk study subjects, health care costs were US$827 lower, on average, during the study year (P= .05; t(729) = 1.95). Among 1028 program users, increased website use was significantly associated with lower health care costs among those who visited the website at least nine times during the study year (US$14 decrease per visit; P = .04; t(1022) = 2.05), with annual savings highest among 80 program users with targeted conditions (US$55 decrease per visit; P < .001; t(74) = 2.71). An employer-sponsored, Internet-based diet and exercise program shows promise as a low-cost benefit that contributes to lower health care costs among persons at higher risk for above-average health care costs and utilization.

A Web-Based Nutrition Program Reduces Health Care Costs in Employees With Cardiac Risk Factors: Before and After Cost Analysis

PubMed Central

Cabral, Howard; Kazis, Lewis E; Jarrett, Kelli M; Vetter, Delia; Richmond, Russell; Moore, Thomas J

2009-01-01

Background Rising health insurance premiums represent a rapidly increasing burden on employer-sponsors of health insurance and their employees. Some employers have become proactive in managing health care costs by providing tools to encourage employees to directly manage their health and prevent disease. One example of such a tool is DASH for Health, an Internet-based nutrition and exercise behavior modification program. This program was offered as a free, opt-in benefit to US-based employees of the EMC Corporation. Objective The aim was to determine whether an employer-sponsored, Internet-based diet and exercise program has an effect on health care costs. Methods There were 15,237 total employees and spouses who were included in our analyses, of whom 1967 enrolled in the DASH for Health program (DASH participants). Using a retrospective, quasi-experimental design, study year health care costs among DASH participants and non-participants were compared, controlling for baseline year costs, risk, and demographic variables. The relationship between how often a subject visited the DASH website and health care costs also was examined. These relationships were examined among all study subjects and among a subgroup of 735 subjects with cardiovascular conditions (diabetes, hypertension, hyperlipidemia). Multiple linear regression analysis examined the relationship of program use to health care costs, comparing study year costs among DASH participants and non-participants and then examining the effects of increased website use on health care costs. Analyses were repeated among the cardiovascular condition subgroups. Results Overall, program use was not associated with changes in health care costs. However, among the cardiovascular risk study subjects, health care costs were US$827 lower, on average, during the study year (P = .05; t 729 = 1.95). Among 1028 program users, increased website use was significantly associated with lower health care costs among those who visited the website at least nine times during the study year (US$14 decrease per visit; P = .04; t 1022 = 2.05), with annual savings highest among 80 program users with targeted conditions (US$55 decrease per visit; P < .001; t 74 = 2.71). Conclusions An employer-sponsored, Internet-based diet and exercise program shows promise as a low-cost benefit that contributes to lower health care costs among persons at higher risk for above-average health care costs and utilization. PMID:19861297

“Lost in translation”: accounting for between-country differences in the analysis of multinational cost-effectiveness data§

PubMed Central

Manca, Andrea; Willan, Andrew R.

2008-01-01

Background Cost-effectiveness analysis has gained status over the last 15 years as an important tool for assisting resource allocation decisions in a budged-limited environment such as healthcare. Randomised (multicentre) multinational controlled trials are often the main vehicle to collect primary patient-level information on resource use, cost and clinical effectiveness associated with alternative treatment strategies. However, trial-wide cost-effectiveness results may not be directly applicable to any one of the countries that participate in a multinational trial, requiring some form of additional modelling to customise the results to the country of interest. Objective The aim is to produce recommendations regarding methods that can be (currently) considered ‘good practice’ when exploring the geographical generalisability of cost-effectiveness data. The manuscript proposes an algorithm to assist with the choice of the appropriate analytical strategy when facing the task of adapting the study results from one country to another. The algorithm considers different scenarios characterised by whether or not (a) the country of interest participated in the trial, and (b) individual patient-level data (IPD) from the trial are available. Methods Structured review with description and discussion of case studies. Conclusions Methods to reflect between-country variability in cost-effectiveness data are available. It is important to be transparent regarding the assumptions made in the analysis and (where possible) assess their impact on the study results. PMID:17067195

Building a Partnership between the United States and India: Exploring Airpower’s Potential

DTIC Science & Technology

2015-04-01

increasing, it is incumbent upon both the Indian and American leadership to find cost -effective, nonkinetic means of de- fending their interests in the...Partnership between the United States and India Feature India’s military power without necessarily upping the ante. Given the IAF’s budgetary constraints...deploy rapidly to locations around the world, the USAF is undoubtedly America’s best tool for supplying immediate assistance. These low- cost missions are

How to interpret a healthcare economic analysis.

PubMed

Brown, Melissa M; Brown, Gary C

2005-06-01

The purpose of the review is to present guidelines to help the clinician to interpret healthcare economic analyses and review pertinent recent analysis in the ophthalmic literature. There are four variants of healthcare economic analyses: (1) cost-minimization analysis; (2) cost-benefit analysis; (3) cost-effectiveness analysis and (4) cost-utility analysis. Cost-utility utility analysis has assumed an increasingly important role in healthcare, with increasing number of analyses occurring in the peer-reviewed ophthalmic literature. These include cost-utility analyses of cataract surgery in the first and second eyes, amblyopia treatment, and cost-utility analyses encompassing the vitreoretinal interventions of the following: (1) laser photocoagulation for exudative macular degeneration; (2) laser treatment for diabetic retinopathy; (3) laser photocoagulation for branch retinal vein obstruction; (4) diabetic vitrectomy; (5) treatment of proliferative retinopathy of prematurity and (6) treatment of retinal detachment associated with proliferative vitreoretinopathy. As an increasing number of cost-utility analyses become available they will provide the information system for the practice of value-based medicine, or medicine based upon the patient-perceived value conferred by interventions. Increasing numbers of cost-utility analysis in the ophthalmic literature suggest that ophthalmic interventions, including vitreoretinal interventions, are cost effective. Cost-utility analysis is a major tool in value-based medicine, the practice of medicine based upon the patient-perceived value conferred by healthcare interventions.

Closed-loop optimization of chromatography column sizing strategies in biopharmaceutical manufacture.

PubMed

Allmendinger, Richard; Simaria, Ana S; Turner, Richard; Farid, Suzanne S

2014-10-01

This paper considers a real-world optimization problem involving the identification of cost-effective equipment sizing strategies for the sequence of chromatography steps employed to purify biopharmaceuticals. Tackling this problem requires solving a combinatorial optimization problem subject to multiple constraints, uncertain parameters, and time-consuming fitness evaluations. An industrially-relevant case study is used to illustrate that evolutionary algorithms can identify chromatography sizing strategies with significant improvements in performance criteria related to process cost, time and product waste over the base case. The results demonstrate also that evolutionary algorithms perform best when infeasible solutions are repaired intelligently, the population size is set appropriately, and elitism is combined with a low number of Monte Carlo trials (needed to account for uncertainty). Adopting this setup turns out to be more important for scenarios where less time is available for the purification process. Finally, a data-visualization tool is employed to illustrate how user preferences can be accounted for when it comes to selecting a sizing strategy to be implemented in a real industrial setting. This work demonstrates that closed-loop evolutionary optimization, when tuned properly and combined with a detailed manufacturing cost model, acts as a powerful decisional tool for the identification of cost-effective purification strategies. © 2013 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Closed-loop optimization of chromatography column sizing strategies in biopharmaceutical manufacture

PubMed Central

Allmendinger, Richard; Simaria, Ana S; Turner, Richard; Farid, Suzanne S

2014-01-01

BACKGROUND This paper considers a real-world optimization problem involving the identification of cost-effective equipment sizing strategies for the sequence of chromatography steps employed to purify biopharmaceuticals. Tackling this problem requires solving a combinatorial optimization problem subject to multiple constraints, uncertain parameters, and time-consuming fitness evaluations. RESULTS An industrially-relevant case study is used to illustrate that evolutionary algorithms can identify chromatography sizing strategies with significant improvements in performance criteria related to process cost, time and product waste over the base case. The results demonstrate also that evolutionary algorithms perform best when infeasible solutions are repaired intelligently, the population size is set appropriately, and elitism is combined with a low number of Monte Carlo trials (needed to account for uncertainty). Adopting this setup turns out to be more important for scenarios where less time is available for the purification process. Finally, a data-visualization tool is employed to illustrate how user preferences can be accounted for when it comes to selecting a sizing strategy to be implemented in a real industrial setting. CONCLUSION This work demonstrates that closed-loop evolutionary optimization, when tuned properly and combined with a detailed manufacturing cost model, acts as a powerful decisional tool for the identification of cost-effective purification strategies. © 2013 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. PMID:25506115

[Economic rehabilitation management among patients with chronic low back pain].

PubMed

Seitz, R; Schweikert, B; Jacobi, E; Tschirdewahn, B; Leidl, R

2001-12-01

Back pain causes high costs to society. In Germany, these amount to an estimated total of 5 billion euro of direct costs per year and 13 billion euro of indirect costs, the latter being caused by incapacity to work. The purpose of this study is to develop a concept for economic rehabilitation management. This concept is based on the managed care approach and aims at improving efficiency of care. The concept development consists of a theoretical and an empirical part. The method of the theoretical part is based on a systematic literature review on managed care (not included in this article), health systems research and the analysis of economic incentives. For the empirical investigation, long term effects and costs were calculated. For the evaluation of effects, we psychometrically tested and used the EuroQol (EQ-5D) as a measure of health-related quality of life (HRQL). The calculation of costs (both direct and indirect) is based on routine data of payers, a cost diary and the internal cost accounting systems of rehabilitation clinics. We statistically analysed the cost distribution and identified predictors of the management targets (e.g., costs of care) by means of regression analyses. The market-driven managed care approach is based on three tools: (1) a primary care system with case management and gatekeeping, (2) direct influence on providers by utilisation review and setting guidelines, and (3) indirect influence by setting supply-side economic incentives via the remuneration mode. The third managed care tool is most important when managing the rehabilitation of working age patients with chronic low back pain from an economic point of view. This concept consists of three components: (1) a case-based budget for direct costs; this is a prospective remuneration mode for an integrated primary care network including a rehabilitation facility, (2) retrospective bonus payments which are related to savings of indirect costs, and (3) retrospective bonus payments which are related to the effectiveness of rehabilitation, i.e. gains in HRQL. Common features of the three management components are a long-term perspective (e.g., from admission to a rehabilitation clinic until six months after discharge) and risk-adjustment of the three management targets (i.e., direct and indirect costs and gains in HRQL) in order to avoid selection and to limit the financial risk for providers. The EuroQol instrument shows acceptable psychometric properties in the rehabilitation setting for back pain patients. This instrument may yield two kinds of preference-based index values, one reflecting the preferences of the general population and one those of the patient. The Pearson correlation of these two approaches is fair, but there is a systematic difference. Empirical investigation shows that the distribution of both direct and indirect costs is skewed to the right. Statistically relevant predictors of the management targets are incapacity to work and HRQL at admission. Economic rehabilitation management might help to save money and to improve health outcomes, thus increasing the efficiency of care. The results of our empirical studies show the feasibility of tools for the economic management of rehabilitation. Risk adjustment of the management components is of paramount importance.

Upstream solutions to coral reef conservation: The payoffs of smart and cooperative decision-making.

PubMed

Oleson, Kirsten L L; Falinski, Kim A; Lecky, Joey; Rowe, Clara; Kappel, Carrie V; Selkoe, Kimberly A; White, Crow

2017-04-15

Land-based source pollutants (LBSP) actively threaten coral reef ecosystems globally. To achieve the greatest conservation outcome at the lowest cost, managers could benefit from appropriate tools that evaluate the benefits (in terms of LBSP reduction) and costs of implementing alternative land management strategies. Here we use a spatially explicit predictive model (InVEST-SDR) that quantifies change in sediment reaching the coast for evaluating the costs and benefits of alternative threat-abatement scenarios. We specifically use the model to examine trade-offs among possible agricultural road repair management actions (water bars to divert runoff and gravel to protect the road surface) across the landscape in West Maui, Hawaii, USA. We investigated changes in sediment delivery to coasts and costs incurred from management decision-making that is (1) cooperative or independent among landowners, and focused on (2) minimizing costs, reducing sediment, or both. The results illuminate which management scenarios most effectively minimize sediment while also minimizing the cost of mitigation efforts. We find targeting specific "hotspots" within all individual parcels is more cost-effective than targeting all road segments. The best outcomes are achieved when landowners cooperate and target cost-effective road repairs, however, a cooperative strategy can be counter-productive in some instances when cost-effectiveness is ignored. Simple models, such as the one developed here, have the potential to help managers make better choices about how to use limited resources. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

The predicted lifetime costs and health consequences of calcium and vitamin D supplementation for fracture prevention-the impact of cardiovascular effects.

PubMed

Hagen, G; Wisløff, T; Kristiansen, I S

2016-06-01

Some studies indicate that calcium supplementation increases cardiovascular risk. We assessed whether such effects could counterbalance the fracture benefits from supplementation. Accounting for cardiovascular outcomes, calcium may cause net harm and would not be cost-effective. Clinicians may do well considering cardiovascular effects when prescribing calcium supplementation. Accounting for possible cardiovascular effect of calcium and vitamin D supplementation (CaD), the aims of this study were to assess whether CaD on balance would improve population health and to evaluate the cost-effectiveness of such supplementation. We created a probabilistic Markov simulation model that was analysed at the individual patient level. We analysed 65-year-old Norwegian women with a 2.3 % 10-year risk of hip fracture and a 9.3 % risk of any major fracture according to the WHO fracture risk assessment tool (FRAX®). Consistent with a recent Cochrane review, we assumed that CaD reduces the risk of hip, vertebral, and wrist fractures by 16, 11, and 5 %, respectively. We included the increased risk of acute myocardial infarction (AMI) and stroke under a no-, medium-, and high-risk scenario. Assuming no cardiovascular effects, CaD supplementation produces improved health outcomes resulting in an incremental gain of 0.0223 quality-adjusted life years (QALYs) and increases costs by €322 compared with no treatment (cost-effectiveness ratio €14,453 per QALY gained). Assuming a Norwegian cost-effectiveness threshold of €60,000 per QALY, CaD is likely to be considered a cost-effective treatment alternative. In a scenario with a medium or high increased risk of cardiovascular events, CaD produces net health losses, respectively, -0.0572 and -0.0784 QALY at additional costs of €481 and €1033. We conclude that the magnitude of potential cardiovascular side effects is crucial for the effectiveness and cost-effectiveness of CaD supplementation in elderly women.

Acquisition Strategies for Aging Aircraft: Modernizing the Marine Corps’ CH-53E Super Stallion Helicopter

DTIC Science & Technology

2001-12-01

of lightweight aluminum alloy, steel , and titanium. The skin of the aircraft is fashioned primarily from fiberglass and Kevlar. The landing gear...endurance has made it one of the most flexible tools available to MAGTF Commanders. However, by compensating for the performance deficiencies of the CH...without jeopardizing both. Using cost effectiveness analysis as a tool to ascertain how that balance might be struck, will be the focus of the

Towards a fair consideration of PrEP as part of combination HIV prevention in Latin America

PubMed Central

Ravasi, Giovanni; Grinsztejn, Beatriz; Baruch, Ricardo; Guanira, Juan Vicente; Luque, Ricardo; Cáceres, Carlos F; Ghidinelli, Massimo

2016-01-01

Introduction Despite progress in scaling up antiretroviral treatment, HIV prevention strategies have not been successful in significantly curbing HIV incidence in Latin America. HIV prevention interventions need to be expanded to target the most affected key populations with a combination approach, including new high impact technologies. Oral pre-exposure prophylaxis (PrEP) is recommended as additional prevention choice for individuals at higher risk of infection and could become a cost-effective prevention tool. We discuss the barriers and solutions for a fair consideration of PrEP as part of combination HIV prevention strategies in Latin America. Discussion Although demonstration projects are ongoing or being planned in a number of countries, to date no Latin American country has implemented a public PrEP programme. The knowledge of policymakers about PrEP implementation needs to be strengthened, and programmatic guidance and cost estimate tools need to be developed to support adequate planning. Despite high levels of awareness among health providers, especially if engaged in HIV or key population care, willingness to prescribe PrEP is still low due to the lack of national policies and guidelines. Key populations, especially men who have sex with men, transgender women and sex workers, have been engaged in demonstration projects, and qualitative research shows high awareness and willingness to use PrEP, especially if accessible in the public sector for free or at affordable price. Concerns of safety, adherence, effectiveness and risk compensation need to be addressed through targeted social communication strategies to improve PrEP knowledge and stimulate demand. Alliance among policymakers, civil society and representatives from key populations, healthcare providers and researchers will be critical for the design and successful implementation of PrEP demonstration projects of locally adapted delivery models. The use of mechanisms of joint negotiation and procurement of antiretrovirals could reduce costs and significantly increase the cost-effectiveness of PrEP. Conclusions PrEP is an additional prevention tool and should be implemented in combination and synergy with other prevention interventions. PrEP programmes should target high-risk individuals from key populations for higher cost-effectiveness. Demonstration projects may generate strategic information for and lead to the implementation of full-scale PrEP programmes. PMID:27760687

Towards a fair consideration of PrEP as part of combination HIV prevention in Latin America.

PubMed

Ravasi, Giovanni; Grinsztejn, Beatriz; Baruch, Ricardo; Guanira, Juan Vicente; Luque, Ricardo; Cáceres, Carlos F; Ghidinelli, Massimo

2016-01-01

Despite progress in scaling up antiretroviral treatment, HIV prevention strategies have not been successful in significantly curbing HIV incidence in Latin America. HIV prevention interventions need to be expanded to target the most affected key populations with a combination approach, including new high impact technologies. Oral pre-exposure prophylaxis (PrEP) is recommended as additional prevention choice for individuals at higher risk of infection and could become a cost-effective prevention tool. We discuss the barriers and solutions for a fair consideration of PrEP as part of combination HIV prevention strategies in Latin America. Although demonstration projects are ongoing or being planned in a number of countries, to date no Latin American country has implemented a public PrEP programme. The knowledge of policymakers about PrEP implementation needs to be strengthened, and programmatic guidance and cost estimate tools need to be developed to support adequate planning. Despite high levels of awareness among health providers, especially if engaged in HIV or key population care, willingness to prescribe PrEP is still low due to the lack of national policies and guidelines. Key populations, especially men who have sex with men, transgender women and sex workers, have been engaged in demonstration projects, and qualitative research shows high awareness and willingness to use PrEP, especially if accessible in the public sector for free or at affordable price. Concerns of safety, adherence, effectiveness and risk compensation need to be addressed through targeted social communication strategies to improve PrEP knowledge and stimulate demand. Alliance among policymakers, civil society and representatives from key populations, healthcare providers and researchers will be critical for the design and successful implementation of PrEP demonstration projects of locally adapted delivery models. The use of mechanisms of joint negotiation and procurement of antiretrovirals could reduce costs and significantly increase the cost-effectiveness of PrEP. PrEP is an additional prevention tool and should be implemented in combination and synergy with other prevention interventions. PrEP programmes should target high-risk individuals from key populations for higher cost-effectiveness. Demonstration projects may generate strategic information for and lead to the implementation of full-scale PrEP programmes.

Cost-effectiveness of community-based practitioner programmes in Ethiopia, Indonesia and Kenya.

PubMed

McPake, Barbara; Edoka, Ijeoma; Witter, Sophie; Kielmann, Karina; Taegtmeyer, Miriam; Dieleman, Marjolein; Vaughan, Kelsey; Gama, Elvis; Kok, Maryse; Datiko, Daniel; Otiso, Lillian; Ahmed, Rukhsana; Squires, Neil; Suraratdecha, Chutima; Cometto, Giorgio

2015-09-01

To assess the cost-effectiveness of community-based practitioner programmes in Ethiopia, Indonesia and Kenya. Incremental cost-effectiveness ratios for the three programmes were estimated from a government perspective. Cost data were collected for 2012. Life years gained were estimated based on coverage of reproductive, maternal, neonatal and child health services. For Ethiopia and Kenya, estimates of coverage before and after the implementation of the programme were obtained from empirical studies. For Indonesia, coverage of health service interventions was estimated from routine data. We used the Lives Saved Tool to estimate the number of lives saved from changes in reproductive, maternal, neonatal and child health-service coverage. Gross domestic product per capita was used as the reference willingness-to-pay threshold value. The estimated incremental cost per life year gained was 82 international dollars ($)in Kenya, $999 in Ethiopia and $3396 in Indonesia. The results were most sensitive to uncertainty in the estimates of life-years gained. Based on the results of probabilistic sensitivity analysis, there was greater than 80% certainty that each programme was cost-effective. Community-based approaches are likely to be cost-effective for delivery of some essential health interventions where community-based practitioners operate within an integrated team supported by the health system. Community-based practitioners may be most appropriate in rural poor communities that have limited access to more qualified health professionals. Further research is required to understand which programmatic design features are critical to effectiveness.

Development and Evaluation of a Riparian Buffer Mapping Tool

USGS Publications Warehouse

Milheim, Lesley E.; Claggett, Peter

2008-01-01

Land use and land cover within riparian areas greatly affect the conditions of adjacent water features. In particular, riparian forests provide many environmental benefits, including nutrient uptake, bank stabilization, steam shading, sediment trapping, aquatic and terrestrial habitat, and stream organic matter. In contrast, residential and commercial development and associated transportation infrastructure increase pollutant and nutrient loading and change the hydrologic characteristics of the landscape, thereby affecting both water quality and habitat. Restoring riparian areas is a popular and cost effective restoration technique to improve and protect water quality. Recognizing this, the Chesapeake Executive Council committed to restoring 10,000 miles of riparian forest buffers throughout the Chesapeake Bay watershed by the year 2010. In 2006, the Chesapeake Executive Council further committed to 'using the best available...tools to identify areas where retention and expansion of forests is most needed to protect water quality'. The Chesapeake Bay watershed encompasses 64,000 square miles, including portions of six States and Washington, D.C. Therefore, the interpretation of remotely sensed imagery provides the only effective technique for comprehensively evaluating riparian forest protection and restoration opportunities throughout the watershed. Although 30-meter-resolution land use and land cover data have proved useful on a regional scale, they have not been equally successful at providing the detail required for local-scale assessment of riparian area characteristics. Use of high-resolution imagery (HRI) provides sufficient detail for local-scale assessments, although at greater cost owing to the cost of the imagery and the skill and time required to process the data. To facilitate the use of HRI for monitoring the extent of riparian forest buffers, the U.S. Forest Service and the U.S. Geological Survey Eastern Geographic Science Center funded the development of a prototype semiautomated image classification tool, RBMapper, that is designed for use by technicians with limited image processing training. This document provides an overview of the RBMapper tool, includes instructions on how to obtain the RBMapper tool and tutorial datasets, and contains a summary evaluation of the tool

Health Literacy Assessment of the STOFHLA: Paper versus Electronic Administration Continuation Study

ERIC Educational Resources Information Center

Chesser, Amy K.; Keene Woods, Nikki; Wipperman, Jennifer; Wilson, Rachel; Dong, Frank

2014-01-01

Low health literacy is associated with poor health outcomes. Research is needed to understand the mechanisms and pathways of its effects. Computer-based assessment tools may improve efficiency and cost-effectiveness of health literacy research. The objective of this preliminary study was to assess if administration of the Short Test of Functional…

An Environmentally Friendly, Cost-Effective Determination of Lead in Environmental Samples Using Anodic Stripping Voltammetry

ERIC Educational Resources Information Center

Goldcamp, Michael J.; Underwood, Melinda N.; Cloud, Joshua L.; Harshman, Sean

2008-01-01

Contamination of the environment with heavy metals such as lead presents many health risks. Simple, effective, and field-portable methods for the measurement of toxic metals in environmental samples are vital tools for evaluating the risks that these contaminants pose. This article describes the use of new developments in anodic stripping…

The Effect of Prior Knowledge and Feedback Type Design on Student Achievement and Satisfaction in Introductory Accounting

ERIC Educational Resources Information Center

Campbell, Donald P.

2013-01-01

This study investigated the effect of student prior knowledge and feedback type on student achievement and satisfaction in an introductory managerial accounting course using computer-based formative assessment tools. The study involved a redesign of the existing Job Order Costing unit using the ADDIE model of instructional design. The…

Introduction (PSW-GTR-246)

Treesearch

James Halperin; David Ganz

2013-01-01

Globally, approximately two-thirds of the world's forests are considered degraded, but practical, cost-effective tools for monitoring forest quality remain elusive. Techniques for monitoring deforestation and changes to forest carbon stocks are widespread and well published. However, techniques for monitoring forest degradation are relatively untested in...

High-Tech Roof Management.

ERIC Educational Resources Information Center

Benzie, Tim

1997-01-01

Describes the use of a computerized roof management system (CRMS) for school districts to foster multiple roof maintenance efficiency and cost effectiveness. Highlights CRMS software manufacturer choices, as well as the types of nondestructive testing equipment tools that can be used to evaluate roof conditions. (GR)

Economic Tools for Managing Nitrogen in Coastal Watersheds

EPA Science Inventory

Watershed managers are interested in using economics to communicate the value of estuarine resources to the wider community, determine the most cost-effective means to reduce nitrogen pollution, and evaluate the benefits of taking action to improve coastal ecosystems. We spoke to...

Understanding Magnetic Flux Leakage (MFL) Signals from Mechanical Damage in Pipelines - Phase I

DOT National Transportation Integrated Search

2007-09-18

Pipeline inspection tools based on Magnetic Flux Leakage (MFL) principles represent the most cost-effective method for in-line detection and monitoring of pipeline corrosion defects. Mechanical damage also produces MFL signals, but as yet these signa...

Evaluation of land use regression models in Detroit, Michigan

EPA Science Inventory

Introduction: Land use regression (LUR) models have emerged as a cost-effective tool for characterizing exposure in epidemiologic health studies. However, little critical attention has been focused on validation of these models as a step toward temporal and spatial extension of ...

Economic consequences of high throughput maskless lithography

NASA Astrophysics Data System (ADS)

Hartley, John G.; Govindaraju, Lakshmi

2005-11-01

Many people in the semiconductor industry bemoan the high costs of masks and view mask cost as one of the significant barriers to bringing new chip designs to market. All that is needed is a viable maskless technology and the problem will go away. Numerous sites around the world are working on maskless lithography but inevitably, the question asked is "Wouldn't a one wafer per hour maskless tool make a really good mask writer?" Of course, the answer is yes, the hesitation you hear in the answer isn't based on technology concerns, it's financial. The industry needs maskless lithography because mask costs are too high. Mask costs are too high because mask pattern generators (PG's) are slow and expensive. If mask PG's become much faster, mask costs go down, the maskless market goes away and the PG supplier is faced with an even smaller tool demand from the mask shops. Technical success becomes financial suicide - or does it? In this paper we will present the results of a model that examines some of the consequences of introducing high throughput maskless pattern generation. Specific features in the model include tool throughput for masks and wafers, market segmentation by node for masks and wafers and mask cost as an entry barrier to new chip designs. How does the availability of low cost masks and maskless tools affect the industries tool makeup and what is the ultimate potential market for high throughput maskless pattern generators?

Lives Saved Tool (LiST) costing: a module to examine costs and prioritize interventions.

PubMed

Bollinger, Lori A; Sanders, Rachel; Winfrey, William; Adesina, Adebiyi

2017-11-07

Achieving the Sustainable Development Goals will require careful allocation of resources in order to achieve the highest impact. The Lives Saved Tool (LiST) has been used widely to calculate the impact of maternal, neonatal and child health (MNCH) interventions for program planning and multi-country estimation in several Lancet Series commissions. As use of the LiST model increases, many have expressed a desire to cost interventions within the model, in order to support budgeting and prioritization of interventions by countries. A limited LiST costing module was introduced several years ago, but with gaps in cost types. Updates to inputs have now been added to make the module fully functional for a range of uses. This paper builds on previous work that developed an initial version of the LiST costing module to provide costs for MNCH interventions using an ingredients-based costing approach. Here, we update in 2016 the previous econometric estimates from 2013 with newly-available data and also include above-facility level costs such as program management. The updated econometric estimates inform percentages of intervention-level costs for some direct costs and indirect costs. These estimates add to existing values for direct cost requirements for items such as drugs and supplies and required provider time which were already available in LiST Costing. Results generated by the LiST costing module include costs for each intervention, as well as disaggregated costs by intervention including drug and supply costs, labor costs, other recurrent costs, capital costs, and above-service delivery costs. These results can be combined with mortality estimates to support prioritization of interventions by countries. The LiST costing module provides an option for countries to identify resource requirements for scaling up a maternal, neonatal, and child health program, and to examine the financial impact of different resource allocation strategies. It can be a useful tool for countries as they seek to identify the best investments for scarce resources. The purpose of the LiST model is to provide a tool to make resource allocation decisions in a strategic planning process through prioritizing interventions based on resulting impact on maternal and child mortality and morbidity.

Clinical impact and cost-effectiveness of making third-line antiretroviral therapy available in sub-Saharan Africa: a model-based analysis in Côte d'Ivoire.

PubMed

Ouattara, Eric N; Ross, Eric L; Yazdanpanah, Yazdan; Wong, Angela Y; Robine, Marion; Losina, Elena; Moh, Raoul; Walensky, Rochelle P; Danel, Christine; Paltiel, A David; Eholié, Serge P; Freedberg, Kenneth A; Anglaret, Xavier

2014-07-01

In sub-Saharan Africa, HIV-infected adults who fail second-line antiretroviral therapy (ART) often do not have access to third-line ART. We examined the clinical impact and cost-effectiveness of making third-line ART available in Côte d'Ivoire. We used a simulation model to compare 4 strategies after second-line ART failure: continue second-line ART (C-ART2), continue second-line ART with an adherence reinforcement intervention (AR-ART2), immediate switch to third-line ART (IS-ART3), and continue second-line ART with adherence reinforcement, switching patients with persistent failure to third-line ART (AR-ART3). Third-line ART consisted of a boosted-darunavir plus raltegravir-based regimen. Primary outcomes were 10-year survival and lifetime incremental cost-effectiveness ratios (ICERs), in $/year of life saved (YLS). ICERs below $3585 (3 times the country per capita gross domestic product) were considered cost-effective. Ten-year survival was 6.0% with C-ART2, 17.0% with AR-ART2, 35.4% with IS-ART3, and 37.2% with AR-ART3. AR-ART2 was cost-effective ($1100/YLS). AR-ART3 had an ICER of $3600/YLS and became cost-effective if the cost of third-line ART decreased by <1%. IS-ART3 was less effective and more costly than AR-ART3. Results were robust to wide variations in the efficacy of third-line ART and of the adherence reinforcement, as well as in the cost of second-line ART. Access to third-line ART combined with an intense adherence reinforcement phase, used as a tool to distinguish between patients who can still benefit from their current second-line regimen and those who truly need third-line ART would provide substantial survival benefits. With minor decreases in drug costs, this strategy would be cost-effective.

Systematic review of incremental non-vaccine cost estimates used in cost-effectiveness analysis on the introduction of rotavirus and pneumococcal vaccines.

PubMed

De la Hoz-Restrepo, Fernando; Castañeda-Orjuela, Carlos; Paternina, Angel; Alvis-Guzman, Nelson

2013-07-02

To review the approaches used in the cost-effectiveness analysis (CEAs) literature to estimate the cost of expanded program on immunization (EPI) activities, other than vaccine purchase, for rotavirus and pneumococcal vaccines. A systematic review in PubMed and NHS EED databases of rotavirus and pneumococcal vaccines CEAs was done. Selected articles were read and information on how EPI costs were calculated was extracted. EPI costing approaches were classified according to the method or assumption used for estimation. Seventy-nine studies that evaluated cost effectiveness of rotavirus (n=43) or pneumococcal (n=36) vaccines were identified. In general, there are few details on how EPI costs other than vaccine procurement were estimated. While 30 studies used some measurement of that cost, only one study on pneumococcal vaccine used a primary cost evaluation (bottom-up costing analysis) and one study used a costing tool. Twenty-seven studies (17 on rotavirus and 10 on pneumococcal vaccine) assumed the non-vaccine costs. Five studies made no reference to additional costs. Fourteen studies (9 rotavirus and 5 pneumococcal) did not consider any additional EPI cost beyond vaccine procurement. For rotavirus studies, the median for non-vaccine cost per dose was US$0.74 in developing countries and US$6.39 in developed countries. For pneumococcal vaccines, the median for non-vaccine cost per dose was US$1.27 in developing countries and US$8.71 in developed countries. Many pneumococcal (52.8%) and rotavirus (60.4%) cost-effectiveness analyses did not consider additional EPI costs or used poorly supported assumptions. Ignoring EPI costs in addition to those for vaccine procurement in CEA analysis of new vaccines may lead to significant errors in the estimations of ICERs since several factors like personnel, cold chain, or social mobilization can be substantially affected by the introduction of new vaccines. Copyright © 2013 Elsevier Ltd. All rights reserved.

Concept design theory and model for multi-use space facilities: Analysis of key system design parameters through variance of mission requirements

NASA Astrophysics Data System (ADS)

Reynerson, Charles Martin

This research has been performed to create concept design and economic feasibility data for space business parks. A space business park is a commercially run multi-use space station facility designed for use by a wide variety of customers. Both space hardware and crew are considered as revenue producing payloads. Examples of commercial markets may include biological and materials research, processing, and production, space tourism habitats, and satellite maintenance and resupply depots. This research develops a design methodology and an analytical tool to create feasible preliminary design information for space business parks. The design tool is validated against a number of real facility designs. Appropriate model variables are adjusted to ensure that statistical approximations are valid for subsequent analyses. The tool is used to analyze the effect of various payload requirements on the size, weight and power of the facility. The approach for the analytical tool was to input potential payloads as simple requirements, such as volume, weight, power, crew size, and endurance. In creating the theory, basic principles are used and combined with parametric estimation of data when necessary. Key system parameters are identified for overall system design. Typical ranges for these key parameters are identified based on real human spaceflight systems. To connect the economics to design, a life-cycle cost model is created based upon facility mass. This rough cost model estimates potential return on investments, initial investment requirements and number of years to return on the initial investment. Example cases are analyzed for both performance and cost driven requirements for space hotels, microgravity processing facilities, and multi-use facilities. In combining both engineering and economic models, a design-to-cost methodology is created for more accurately estimating the commercial viability for multiple space business park markets.

How much does it cost to achieve coverage targets for primary healthcare services? A costing model from Aceh, Indonesia.

PubMed

Abdullah, Asnawi; Hort, Krishna; Abidin, Azwar Zaenal; Amin, Fadilah M

2012-01-01

Despite significant investment in improving service infrastructure and training of staff, public primary healthcare services in low-income and middle-income countries tend to perform poorly in reaching coverage targets. One of the factors identified in Aceh, Indonesia was the lack of operational funds for service provision. The objective of this study was to develop a simple and transparent costing tool that enables health planners to calculate the unit costs of providing basic health services to estimate additional budgets required to deliver services in accordance with national targets. The tool was developed using a standard economic approach that linked the input activities to achieving six national priority programs at primary healthcare level: health promotion, sanitation and environment health, maternal and child health and family planning, nutrition, immunization and communicable diseases control, and treatment of common illness. Costing was focused on costs of delivery of the programs that need to be funded by local government budgets. The costing tool consisting of 16 linked Microsoft Excel worksheets was developed and tested in several districts enabled the calculation of the unit costs of delivering of the six national priority programs per coverage target of each program (such as unit costs of delivering of maternal and child health program per pregnant mother). This costing tool can be used by health planners to estimate additional money required to achieve a certain level of coverage of programs, and it can be adjusted for different costs and program delivery parameters in different settings. Copyright © 2012 John Wiley & Sons, Ltd.

Mechanical impedance measurements for improved cost-effective process monitoring

NASA Astrophysics Data System (ADS)

Clopet, Caroline R.; Pullen, Deborah A.; Badcock, Rodney A.; Ralph, Brian; Fernando, Gerard F.; Mahon, Steve W.

1999-06-01

The aerospace industry has seen a considerably growth in composite usage over the past ten years, especially with the development of cost effective manufacturing techniques such as Resin Transfer Molding and Resin Infusion under Flexible Tooling. The relatively high cost of raw material and conservative processing schedules has limited their growth further in non-aerospace technologies. In-situ process monitoring has been explored for some time as a means to improving the cost efficiency of manufacturing with dielectric spectroscopy and optical fiber sensors being the two primary techniques developed to date. A new emerging technique is discussed here making use of piezoelectric wafers with the ability to sense not only aspects of resin flow but also to detect the change in properties of the resin as it cures. Experimental investigations to date have shown a correlation between mechanical impedance measurements and the mechanical properties of cured epoxy systems with potential for full process monitoring.

CONSTRUCTION AND VALIDATION OF LOW COST LAPAROSCOPIC SIMULATOR USING ANDROID SMARTPHONE AND POP CAST AND A LAPTOP.

PubMed

Vyas, A; Goel, G

2017-09-01

Minimal invasive surgery training requires a lot of practice and for this purpose innovative tools are needed to develop methods for practice and training skills outside the operating room. Commercially available devices are readily available but cost effectiveness and availability are major limiting factors in resource limited setting. We present an innovative and cost effective laparoscopic simulator which can be easily manufactured and used for practice of laparoscopic surgery. Using a free android application, such as IP webcam we can relay video to laptop without the use of any cables and uniquely we use the flash of a camera as the light source and a selfie stick for movement of the camera. Use of this type of setup can help to reduce cost of simulated learning in low income countries and makes laparoscopic training facilities readily available. Copyright© Authors.

Clinical governance and operations management methodologies.

PubMed

Davies, C; Walley, P

2000-01-01

The clinical governance mechanism, introduced since 1998 in the UK National Health Service (NHS), aims to deliver high quality care with efficient, effective and cost-effective patient services. Scally and Donaldson recognised that new approaches are needed, and operations management techniques comprise potentially powerful methodologies in understanding the process of care, which can be applied both within and across professional boundaries. This paper summarises four studies in hospital Trusts which took approaches to improving process that were different from and less structured than business process re-engineering (BPR). The problems were then amenable to change at a relatively low cost and short timescale, producing significant improvement to patient care. This less structured approach to operations management avoided incurring overhead costs of large scale and costly change such as new information technology (IT) systems. The most successful changes were brought about by formal tools to control quantity, content and timing of changes.

Multidisciplinary life cycle metrics and tools for green buildings.

PubMed

Helgeson, Jennifer F; Lippiatt, Barbara C

2009-07-01

Building sector stakeholders need compelling metrics, tools, data, and case studies to support major investments in sustainable technologies. Proponents of green building widely claim that buildings integrating sustainable technologies are cost effective, but often these claims are based on incomplete, anecdotal evidence that is difficult to reproduce and defend. The claims suffer from 2 main weaknesses: 1) buildings on which claims are based are not necessarily "green" in a science-based, life cycle assessment (LCA) sense and 2) measures of cost effectiveness often are not based on standard methods for measuring economic worth. Yet, the building industry demands compelling metrics to justify sustainable building designs. The problem is hard to solve because, until now, neither methods nor robust data supporting defensible business cases were available. The US National Institute of Standards and Technology (NIST) Building and Fire Research Laboratory is beginning to address these needs by developing metrics and tools for assessing the life cycle economic and environmental performance of buildings. Economic performance is measured with the use of standard life cycle costing methods. Environmental performance is measured by LCA methods that assess the "carbon footprint" of buildings, as well as 11 other sustainability metrics, including fossil fuel depletion, smog formation, water use, habitat alteration, indoor air quality, and effects on human health. Carbon efficiency ratios and other eco-efficiency metrics are established to yield science-based measures of the relative worth, or "business cases," for green buildings. Here, the approach is illustrated through a realistic building case study focused on different heating, ventilation, air conditioning technology energy efficiency. Additionally, the evolution of the Building for Environmental and Economic Sustainability multidisciplinary team and future plans in this area are described.

Benefit design innovations: implications for consumer-directed health care.

PubMed

Tu, Ha T; Ginsburg, Paul B

2007-02-01

Current health insurance benefit designs that simply rely on higher, one-size-fits-all patient cost sharing have limited potential to curb rapidly rising costs, but innovations in benefit design can potentially make cost sharing a more effective tool, according to a new study by the Center for Studying Health System Change (HSC). Innovative benefit designs include incentives to encourage healthy behaviors; incentives that vary by service type, patient condition or enrollee income; and incentives to use efficient providers. But most applications of these innovative designs are not widespread, suggesting that any significant cost impact is many years off. Moreover, regulations governing high-deductible, consumer-directed health plans eligible for health savings accounts (HSAs) preclude some promising benefit design innovations and dilute the incentives in others. A movement away from a one-size-fits-all HSA benefit structure toward a more flexible design might broaden the appeal of HSA plans and enable them to incorporate features that promote cost-effective care.

System Risk Assessment and Allocation in Conceptual Design

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Smith, Natasha L.; Zang, Thomas A. (Technical Monitor)

2003-01-01

As aerospace systems continue to evolve in addressing newer challenges in air and space transportation, there exists a heightened priority for significant improvement in system performance, cost effectiveness, reliability, and safety. Tools, which synthesize multidisciplinary integration, probabilistic analysis, and optimization, are needed to facilitate design decisions allowing trade-offs between cost and reliability. This study investigates tools for probabilistic analysis and probabilistic optimization in the multidisciplinary design of aerospace systems. A probabilistic optimization methodology is demonstrated for the low-fidelity design of a reusable launch vehicle at two levels, a global geometry design and a local tank design. Probabilistic analysis is performed on a high fidelity analysis of a Navy missile system. Furthermore, decoupling strategies are introduced to reduce the computational effort required for multidisciplinary systems with feedback coupling.

A case management tool for occupational health nurses: development, testing, and application.

PubMed

Mannon, J A; Conrad, K M; Blue, C L; Muran, S

1994-08-01

1. Case management is a process of coordinating an individual client's health care services to achieve optimal, quality care delivered in a cost effective manner. The case manager establishes a provider network, recommends treatment plans that assure quality and efficacy while controlling costs, monitors outcomes, and maintains a strong communication link among all the parties. 2. Through development of audit tools such as the one presented in this article, occupational health nurses can document case management activities and provide employers with measurable outcomes. 3. The Case Management Activity Checklist was tested using data from 61 firefighters' musculoskeletal injury cases. 4. The activities on the checklist are a step by step process: case identification/case disposition; assessment; return to work plan; resource identification; collaborative communication; and evaluation.

Low-cost computer mouse for the elderly or disabled in Taiwan.

PubMed

Chen, C-C; Chen, W-L; Chen, B-N; Shih, Y-Y; Lai, J-S; Chen, Y-L

2014-01-01

A mouse is an important communication interface between a human and a computer, but it is still difficult to use for the elderly or disabled. To develop a low-cost computer mouse auxiliary tool. The principal structure of the low-cost mouse auxiliary tool is the IR (infrared ray) array module and the Wii icon sensor module, which combine with reflective tape and the SQL Server database. This has several benefits including cheap hardware cost, fluent control, prompt response, adaptive adjustment and portability. Also, it carries the game module with the function of training and evaluation; to the trainee, it is really helpful to upgrade the sensitivity of consciousness/sense and the centralization of attention. The intervention phase/maintenance phase, with regard to clicking accuracy and use of time, p value (p< 0.05) reach the level of significance. The development of the low cost adaptive computer mouse auxiliary tool was completed during the study and was also verified as having the characteristics of low cost, easy operation and the adaptability. To patients with physical disabilities, if they have independent control action parts of their limbs, the mouse auxiliary tool is suitable for them to use, i.e. the user only needs to paste the reflective tape by the independent control action parts of the body to operate the mouse auxiliary tool.

A generally applicable lightweight method for calculating a value structure for tools and services in bioinformatics infrastructure projects.

PubMed

Mayer, Gerhard; Quast, Christian; Felden, Janine; Lange, Matthias; Prinz, Manuel; Pühler, Alfred; Lawerenz, Chris; Scholz, Uwe; Glöckner, Frank Oliver; Müller, Wolfgang; Marcus, Katrin; Eisenacher, Martin

2017-10-30

Sustainable noncommercial bioinformatics infrastructures are a prerequisite to use and take advantage of the potential of big data analysis for research and economy. Consequently, funders, universities and institutes as well as users ask for a transparent value model for the tools and services offered. In this article, a generally applicable lightweight method is described by which bioinformatics infrastructure projects can estimate the value of tools and services offered without determining exactly the total costs of ownership. Five representative scenarios for value estimation from a rough estimation to a detailed breakdown of costs are presented. To account for the diversity in bioinformatics applications and services, the notion of service-specific 'service provision units' is introduced together with the factors influencing them and the main underlying assumptions for these 'value influencing factors'. Special attention is given on how to handle personnel costs and indirect costs such as electricity. Four examples are presented for the calculation of the value of tools and services provided by the German Network for Bioinformatics Infrastructure (de.NBI): one for tool usage, one for (Web-based) database analyses, one for consulting services and one for bioinformatics training events. Finally, from the discussed values, the costs of direct funding and the costs of payment of services by funded projects are calculated and compared. © The Author 2017. Published by Oxford University Press.

The application of iodine and magnetic susceptibility surface geochemical surveys in the Lodgepole Play, Eastern Williston Basin, North Dakota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tedesco, S.A.

1996-06-01

The use of surface geochemistry as a first pass exploration tool is becoming more prevalent in petroleum exploration. This is especially true due to the high cost of 2-D and 3-D surveys in defining small targets such as the Waulsortian mounds of the Lodgepole Formation. Surface geochemical surveys are very effective in pinpointing specific target areas for seismic surveying and thus reducing costs. Presented are examples of surface geochemical surveys utilizing magnetic susceptibility and iodine methods in delineating reservoirs in the Lodgepole, Mission Canyon and Red River formations. The types of surveys presented vary from reconnaissance to detail and examplesmore » of how to define a grid will be discussed. Surface geochemical surveys can be very effective when the areal extent of the target(s) and the purpose of the survey are clearly defined prior to implementation. By determining which areas have microseepage and which areas do not, surface geochemistry can be a very effective tool in focusing exploration efforts and maximizing exploration dollars.« less

Population-level consequences of antipredator behavior: a metaphysiological model based on the functional ecology of the leaf-eared mouse.

PubMed

Ramos-Jiliberto, Rodrigo; González-Olivares, Eduardo; Bozinovic, Francisco

2002-08-01

We present a predator-prey metaphysiological model, based on the available behavioral and physiological information of the sigmodontine rodent Phyllotis darwini. The model is focused on the population-level consequences of the antipredator behavior, performed by the rodent population, which is assumed to be an inducible response of predation avoidance. The decrease in vulnerability is explicitly considered to have two associated costs: a decreasing foraging success and an increasing metabolic loss. The model analysis was carried out on a reduced form of the system by means of numerical and analytical tools. We evaluated the stability properties of equilibrium points in the phase plane, and carried out bifurcation analyses of rodent equilibrium density under varying conditions of three relevant parameters. The bifurcation parameters chosen represent predator avoidance effectiveness (A), foraging cost of antipredator behavior (C(1)'), and activity-metabolism cost (C(4)'). Our analysis suggests that the trade-offs involved in antipredator behavior plays a fundamental role in the stability properties of the system. Under conditions of high foraging cost, stability decreases as antipredator effectiveness increases. Under the complementary scenario (not considering the highest foraging costs), the equilibria are either stable when both costs are low, or unstable when both costs are higher, independent of antipredator effectiveness. No evidence of stabilizing effects of antipredator behavior was found. Copyright 2002 Elsevier Science (USA).

Design of Scalable and Effective Earth Science Collaboration Tool

NASA Astrophysics Data System (ADS)

Maskey, M.; Ramachandran, R.; Kuo, K. S.; Lynnes, C.; Niamsuwan, N.; Chidambaram, C.

2014-12-01

Collaborative research is growing rapidly. Many tools including IDEs are now beginning to incorporate new collaborative features. Software engineering research has shown the effectiveness of collaborative programming and analysis. In particular, drastic reduction in software development time resulting in reduced cost has been highlighted. Recently, we have witnessed the rise of applications that allow users to share their content. Most of these applications scale such collaboration using cloud technologies. Earth science research needs to adopt collaboration technologies to reduce redundancy, cut cost, expand knowledgebase, and scale research experiments. To address these needs, we developed the Earth science collaboration workbench (CWB). CWB provides researchers with various collaboration features by augmenting their existing analysis tools to minimize learning curve. During the development of the CWB, we understood that Earth science collaboration tasks are varied and we concluded that it is not possible to design a tool that serves all collaboration purposes. We adopted a mix of synchronous and asynchronous sharing methods that can be used to perform collaboration across time and location dimensions. We have used cloud technology for scaling the collaboration. Cloud has been highly utilized and valuable tool for Earth science researchers. Among other usages, cloud is used for sharing research results, Earth science data, and virtual machine images; allowing CWB to create and maintain research environments and networks to enhance collaboration between researchers. Furthermore, collaborative versioning tool, Git, is integrated into CWB for versioning of science artifacts. In this paper, we present our experience in designing and implementing the CWB. We will also discuss the integration of collaborative code development use cases for data search and discovery using NASA DAAC and simulation of satellite observations using NASA Earth Observing System Simulation Suite (NEOS3).

The costs and effects of contrast-enhanced magnetic resonance angiography and digital substraction angiography on quality of life in patients with peripheral arterial disease.

PubMed

Bosma, Jan; Dijksman, Lea M; Lam, Kayan; Wisselink, Willem; van Swijndregt, Alexander D Montauban; Vahl, Anco

2014-04-01

Contrast-enhanced magnetic resonance angiography (MRA) and intra-arterial digital subtraction angiography (DSA) both have a high diagnostic performance in the imaging of peripheral arterial occlusive disease (PAOD). However, little is known about the effects of initial, preoperative imaging using MRA or DSA on quality of life (QoL) in relation to costs (cost-utility). To compare cost-utility of treatment strategies using either MRA or DSA as the principal imaging tool, related to QoL, in patients with PAOD. In a prospective subgroup analysis of patients randomized between MRA and DSA (n = 79) for preoperative imaging, QoL questionnaires (SF-36) were obtained at randomization and at 4-month follow-up. Cost-effectiveness from hospital perspective was subsequently compared between groups and the difference in gained or lost QoL per € spent assessed using bootstrap analysis. No difference in quality of life was found. A treatment trajectory employing MRA as the principal imaging modality was almost 20% cheaper, leading to a better cost-utility ratio in favor of MRA. A treatment plan for peripheral arterial occlusive disease employing MRA versus DSA as the principal imaging modality yields a better cost/QoL ratio for MRA.

Public biobanks: calculation and recovery of costs.

PubMed

Clément, Bruno; Yuille, Martin; Zaltoukal, Kurt; Wichmann, Heinz-Erich; Anton, Gabriele; Parodi, Barbara; Kozera, Lukasz; Bréchot, Christian; Hofman, Paul; Dagher, Georges

2014-11-05

A calculation grid developed by an international expert group was tested across biobanks in six countries to evaluate costs for collections of various types of biospecimens. The assessment yielded a tool for setting specimen-access prices that were transparently related to biobank costs, and the tool was applied across three models of collaborative partnership. Copyright © 2014, American Association for the Advancement of Science.

Analytical Tools for Affordability Analysis

DTIC Science & Technology

2015-05-01

function (Womer)  Unit cost as a function of learning and rate  Learning with forgetting (Benkard)  Learning depreciates over time  Discretionary...Analytical Tools for Affordability Analysis David Tate Cost Analysis and Research Division Institute for Defense Analyses Report Documentation...ES) Institute for Defense Analyses, Cost Analysis and Research Division,4850 Mark Center Drive,Alexandria,VA,22311-1882 8. PERFORMING ORGANIZATION

Fuels planning: science synthesis and integration; economic uses fact sheet 08: prescribed fire costs

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Although the use of prescribed fire as a management tool is widespread, there is great variability and uncertainty in the treatment costs. Given specific site variables and management objectives, how much will it cost to use prescribed fire? This paper describes the FASTRACS database, a tool that has been developed to aid managers in addressing this question.

Department of the Army Cost Analysis Manual

DTIC Science & Technology

2002-05-01

TOOLS ( ACEIT ) ........................................................171 SECTION II - AUTOMATED COST DATA BASE (ACDB...Integrated Tools ( ACEIT ) model and since it is widely used to prepare POEs, CCAs and ICEs, it would expedite the comparative analysis of the submission if...IPT Co-chairs. The documentation produced by the Cost/CRB IPT (in ACEIT ) will be the basis for information contained in the CAB. Any remaining

Department of the Army Cost Analysis Manual

DTIC Science & Technology

2001-05-01

SECTION I - AUTOMATED COST ESTIMATING INTEGRATED TOOLS ( ACEIT ) ................................................................179 SECTION II - AUTOMATED...Management & Comptroller) endorsed the Automated Cost Estimating Integrated Tools ( ACEIT ) model and since it is widely used to prepare POEs, CCAs and...CRB IPT (in ACEIT ) will be the basis for information contained in the CAB. Any remaining unresolved issues from the IPT process will be raised at the

Podometrics as a Potential Clinical Tool for Glomerular Disease Management.

PubMed

Kikuchi, Masao; Wickman, Larysa; Hodgin, Jeffrey B; Wiggins, Roger C

2015-05-01

Chronic kidney disease culminating in end-stage kidney disease is a major public health problem costing in excess of $40 billion per year with high morbidity and mortality. Current tools for glomerular disease monitoring lack precision and contribute to poor outcome. The podocyte depletion hypothesis describes the major mechanisms underlying the progression of glomerular diseases, which are responsible for more than 80% of cases of end-stage kidney disease. The question arises of whether this new knowledge can be used to improve outcomes and reduce costs. Podocytes have unique characteristics that make them an attractive monitoring tool. Methodologies for estimating podocyte number, size, density, glomerular volume and other parameters in routine kidney biopsies, and the rate of podocyte detachment from glomeruli into urine (podometrics) now have been developed and validated. They potentially fill important gaps in the glomerular disease monitoring toolbox. The application of these tools to glomerular disease groups shows good correlation with outcome, although data validating their use for individual decision making is not yet available. Given the urgency of the clinical problem, we argue that the time has come to focus on testing these tools for application to individualized clinical decision making toward more effective progression prevention. Copyright © 2015 Elsevier Inc. All rights reserved.

COST-EFFECTIVE ALLOCATION OF WATERSHED MANAGEMENT PRACTICES USING A GENETIC ALGORITHM

EPA Science Inventory

Implementation of conservation programs are perceived as being crucial for restoring and protecting waters and watersheds from non-point source pollution. Success of these programs depends to a great extent on planning tools that can assist the watershed management process. Here-...

Using Electronic Portfolios

ERIC Educational Resources Information Center

Page, Deb

2012-01-01

The digitized collections of artifacts known as electronic portfolios are creating solutions to a variety of performance improvement needs in ways that are cost-effective and improve both individual and group learning and performance. When social media functionality is embedded in e-portfolios, the tools support collaboration, social learning,…

Integrated Pore-Water and Geophysical Investigations StreamlineCharacterization of Ground-Water Discharges to Surface Water

EPA Science Inventory

This issue of Technology News and Trends highlights strategies and tools for characterizing or monitoring remediation of sites with contaminated sediment. Addressing these sites often relies upon dynamic workplans that involve more efficient, cost-effective, and practical methods...

Genotype imputation in a tropical crossbred dairy cattle population

USDA-ARS?s Scientific Manuscript database

The application of new tools, such as genomic selection and genotype imputation, still presents challenges in crossbred populations because relationships of causal variants with markers may vary across breeds. In order to make genomic selection more cost effective, cheap low density chips are often ...

[The cost-effectiveness of Haemophilus influenzae type b vaccine for children under 2 years of age in Colombia].

PubMed

Alvis Guzmán, Nelson; De La Hoz Restrepo, Fernando; Vivas Consuelo, David

2006-10-01

Conjugate vaccines are the best public health tools available for preventing most invasive diseases caused by Haemophilus influenzae type b (Hib), but the high cost of the vaccines has so far kept them from being introduced worldwide. The objective of this study was to estimate the cost-effectiveness of introducing Hib conjugate vaccines for the prevention of meningitis and pneumonia among children under 2 years of age in Colombia. We estimated the direct and indirect costs of managing in-hospital pneumonia and meningitis cases. In addition, following the recommendations of the World Health Organization, we assessed the cost-effectiveness of Hib vaccination programs. We also estimated the costs for preventing Hib cases, and the cost per year of life saved in two hypothetical situations: (1) with vaccination against Hib (with 90% coverage) and (2) without vaccination. The average in-hospital treatment costs were 611.50 US$ (95% confidence interval (95% CI) = 532.2 to 690.8 US$) per case of pneumonia and 848.9 US$ (95% CI = 716.8 to 981.0 US$) per case of meningitis. The average cost per Hib case prevented was 316.7 US$ (95% CI = 294.2 to 339.2 US$). In terms of cost-effectiveness, the cost would be 2.38 US$ per year of life saved for vaccination, versus 3.81 US$ per year of life saved without vaccination. Having an adequate Hib vaccination program in Colombia could prevent around 25,000 cases of invasive disease per year, representing a cost savings of at least 15 million US$ annually. Furthermore, the program could prevent some 700 deaths per year and save 44,054 years of life per year.

Rationality Validation of a Layered Decision Model for Network Defense

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Huaqiang; Alves-Foss, James; Zhang, Du

2007-08-31

We propose a cost-effective network defense strategy built on three key: three decision layers: security policies, defense strategies, and real-time defense tactics for countering immediate threats. A layered decision model (LDM) can be used to capture this decision process. The LDM helps decision-makers gain insight into the hierarchical relationships among inter-connected entities and decision types, and supports the selection of cost-effective defense mechanisms to safeguard computer networks. To be effective as a business tool, it is first necessary to validate the rationality of model before applying it to real-world business cases. This paper describes our efforts in validating the LDMmore » rationality through simulation.« less

Optimization methods applied to hybrid vehicle design

NASA Technical Reports Server (NTRS)

Donoghue, J. F.; Burghart, J. H.

1983-01-01

The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

Intersection life cycle cost comparison tool user guide version 1.0.

DOT National Transportation Integrated Search

2016-05-01

The Intersection Life Cycle Cost Comparison Tool User Guide was developed as part of North : Carolina Department of Transportation Research Project No. 201411: Evaluation of Life Cycle : Impacts of Intersection Control Type Selection. : This sprea...

SAVANT: Solar Array Verification and Analysis Tool Demonstrated

NASA Technical Reports Server (NTRS)

Chock, Ricaurte

2000-01-01

The photovoltaics (PV) industry is now being held to strict specifications, such as end-oflife power requirements, that force them to overengineer their products to avoid contractual penalties. Such overengineering has been the only reliable way to meet such specifications. Unfortunately, it also results in a more costly process than is probably necessary. In our conversations with the PV industry, the issue of cost has been raised again and again. Consequently, the Photovoltaics and Space Environment Effects branch at the NASA Glenn Research Center at Lewis Field has been developing a software tool to address this problem. SAVANT, Glenn's tool for solar array verification and analysis is in the technology demonstration phase. Ongoing work has proven that more efficient and less costly PV designs should be possible by using SAVANT to predict the on-orbit life-cycle performance. The ultimate goal of the SAVANT project is to provide a user-friendly computer tool to predict PV on-orbit life-cycle performance. This should greatly simplify the tasks of scaling and designing the PV power component of any given flight or mission. By being able to predict how a particular PV article will perform, designers will be able to balance mission power requirements (both beginning-of-life and end-of-life) with survivability concerns such as power degradation due to radiation and/or contamination. Recent comparisons with actual flight data from the Photovoltaic Array Space Power Plus Diagnostics (PASP Plus) mission validate this approach.

Decision-support tool for assessing biomanufacturing strategies under uncertainty: stainless steel versus disposable equipment for clinical trial material preparation.

PubMed

Farid, Suzanne S; Washbrook, John; Titchener-Hooker, Nigel J

2005-01-01

This paper presents the application of a decision-support tool, SIMBIOPHARMA, for assessing different manufacturing strategies under uncertainty for the production of biopharmaceuticals. SIMBIOPHARMA captures both the technical and business aspects of biopharmaceutical manufacture within a single tool that permits manufacturing alternatives to be evaluated in terms of cost, time, yield, project throughput, resource utilization, and risk. Its use for risk analysis is demonstrated through a hypothetical case study that uses the Monte Carlo simulation technique to imitate the randomness inherent in manufacturing subject to technical and market uncertainties. The case study addresses whether start-up companies should invest in a stainless steel pilot plant or use disposable equipment for the production of early phase clinical trial material. The effects of fluctuating product demands and titers on the performance of a biopharmaceutical company manufacturing clinical trial material are analyzed. The analysis highlights the impact of different manufacturing options on the range in possible outcomes for the project throughput and cost of goods and the likelihood that these metrics exceed a critical threshold. The simulation studies highlight the benefits of incorporating uncertainties when evaluating manufacturing strategies. Methods of presenting and analyzing information generated by the simulations are suggested. These are used to help determine the ranking of alternatives under different scenarios. The example illustrates the benefits to companies of using such a tool to improve management of their R&D portfolios so as to control the cost of goods.

Role of the anesthesiologist in the wider governance of healthcare and health economics.

PubMed

Martin, Janet; Cheng, Davy

2013-09-01

Healthcare resources will always be limited, and as a result, difficult decisions must be made about how to allocate limited resources across unlimited demands in order to maximize health gains per resource expended. Governments and hospitals now in severe financial deficits recognize that reengagement of physicians is central to their ability to contain the runaway healthcare costs. Health economic analysis provides tools and techniques to assess which investments in healthcare provide good value for money vs which options should be forgone. Robust decision-making in healthcare requires objective consideration of evidence in order to balance clinical and economic benefits vs risks. Surveys of the literature reveal very few economic analyses related to anesthesia and perioperative medicine despite increasing recognition of the need. Now is an opportune time for anesthesiologists to become familiar with the tools and methodologies of health economics in order to facilitate and lead robust decision-making in quality-based procedures. For most technologies used in anesthesia and perioperative medicine, the responsibility to determine cost-effectiveness falls to those tasked with the governance and stewardship of limited resources for unlimited demands using best evidence plus economics at the local, regional, and national levels. Applicable cost-effectiveness, cost-utility, and cost-benefits in health economics are reviewed in this article with clinical examples in anesthesia. Anesthesiologists can make a difference in the wider governance of healthcare and health economics if we advance our knowledge and skills beyond the technical to address the "other" dimensions of decision-making--most notably, the economic aspects in a value-based healthcare system.

Black light photography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lisin, M.A.

1996-11-01

Black light photography of fluorescent penetrant and wet fluorescent magnetic particle indications can yield spectacular and useful results. The technique provides a lasting record of a flaw`s severity and location, as well as its physical relation to other components and important features. The procedures are easily learned and do not require sophisticated apparatus. In fact, equipment costs can often be justified on the basis of a single application. Using the techniques described in this article, black light photography can be a cost-effective, informative NDT tool.

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens.

PubMed

Ghafouri Moghaddam, Mohammad Hossein; Ghafouri Moghaddam, Mostafa; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool.

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens

PubMed Central

Ghafouri Moghaddam, Mohammad Hossein; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

Abstract A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool. PMID:29104440

A NASA-wide approach toward cost-effective, high-quality software through reuse

NASA Technical Reports Server (NTRS)

Scheper, Charlotte O. (Editor); Smith, Kathryn A. (Editor)

1993-01-01

NASA Langley Research Center sponsored the second Workshop on NASA Research in Software Reuse on May 5-6, 1992 at the Research Triangle Park, North Carolina. The workshop was hosted by the Research Triangle Institute. Participants came from the three NASA centers, four NASA contractor companies, two research institutes and the Air Force's Rome Laboratory. The purpose of the workshop was to exchange information on software reuse tool development, particularly with respect to tool needs, requirements, and effectiveness. The participants presented the software reuse activities and tools being developed and used by their individual centers and programs. These programs address a wide range of reuse issues. The group also developed a mission and goals for software reuse within NASA. This publication summarizes the presentations and the issues discussed during the workshop.

A fractured rock geophysical toolbox method selection tool

USGS Publications Warehouse

Day-Lewis, F. D.; Johnson, C.D.; Slater, L.D.; Robinson, J.L.; Williams, J.H.; Boyden, C.L.; Werkema, D.D.; Lane, J.W.

2016-01-01

Geophysical technologies have the potential to improve site characterization and monitoring in fractured rock, but the appropriate and effective application of geophysics at a particular site strongly depends on project goals (e.g., identifying discrete fractures) and site characteristics (e.g., lithology). No method works at every site or for every goal. New approaches are needed to identify a set of geophysical methods appropriate to specific project goals and site conditions while considering budget constraints. To this end, we present the Excel-based Fractured-Rock Geophysical Toolbox Method Selection Tool (FRGT-MST). We envision the FRGT-MST (1) equipping remediation professionals with a tool to understand what is likely to be realistic and cost-effective when contracting geophysical services, and (2) reducing applications of geophysics with unrealistic objectives or where methods are likely to fail.

A pilot cost-effectiveness analysis of treatments in newly diagnosed high-grade gliomas: the example of 5-aminolevulinic Acid compared with white-light surgery.

PubMed

Esteves, Susana; Alves, Marta; Castel-Branco, Marta; Stummer, Walter

2015-05-01

High-grade gliomas are aggressive, incurable tumors characterized by extensive diffuse invasion of the normal brain parenchyma. Novel therapies at best prolong survival; their costs are formidable and benefit is marginal. Economic restrictions thus require knowledge of the cost-effectiveness of treatments. Here, we show the cost-effectiveness of enhanced resections in malignant glioma surgery using a well-characterized tool for intraoperative tumor visualization, 5-aminolevulinic acid (5-ALA). To evaluate the cost-effectiveness of 5-ALA fluorescence-guided neurosurgery compared with white-light surgery in adult patients with newly diagnosed high-grade glioma, adopting the perspective of the Portuguese National Health Service. We used a Markov model (cohort simulation). Transition probabilities were estimated with the use of data from 1 randomized clinical trial and 1 noninterventional prospective study. Utility values and resource use were obtained from published literature and expert opinion. Unit costs were taken from official Portuguese reimbursement lists (2012 values). The health outcomes considered were quality-adjusted life-years, life-years, and progression-free life-years. Extensive 1-way and probabilistic sensitivity analyses were performed. The incremental cost-effectiveness ratios are below &OV0556;10 000 in all evaluated outcomes, being around &OV0556;9100 per quality-adjusted life-year gained, &OV0556;6700 per life-year gained, and &OV0556;8800 per progression-free life-year gained. The probability of 5-ALA fluorescence-guided surgery cost-effectiveness at a threshold of &OV0556;20000 is 96.0% for quality-adjusted life-year, 99.6% for life-year, and 98.8% for progression-free life-year. 5-ALA fluorescence-guided surgery appears to be cost-effective in newly diagnosed high-grade gliomas compared with white-light surgery. This example demonstrates cost-effectiveness analyses for malignant glioma surgery to be feasible on the basis of existing data.

The health economics of bladder cancer: an updated review of the published literature.

PubMed

Yeung, Christina; Dinh, Tuan; Lee, Joseph

2014-11-01

The purpose of this paper is to provide a current view of the economic burden of bladder cancer, with a focus on the cost effectiveness of available interventions. This review updates a previous systematic review and includes 72 new papers published between 2000 and 2013. Bladder cancer continues to be one of the most common and expensive malignancies. The annual cost of bladder cancer in the USA during 2010 was $US4 billion and is expected to rise to $US5 billion by 2020. Ten years ago, urinary markers held the potential to lower treatment costs of bladder cancer. However, subsequent real-world experiments have demonstrated that further work is necessary to identify situations in which these technologies can be applied in a cost-effective manner. Adjunct cytology remains a part of diagnostic standard of care, but recent research suggests that it is not cost effective due to its low diagnostic yield. Analysis of intravesical chemotherapy after transurethral resection of bladder tumor (TURBT), neo-adjuvant therapy for cystectomy, and robot-assisted laparoscopic cystectomy suggests that these technologies are cost effective and should be implemented more widely for appropriate patients. The existing literature on the cost effectiveness of bladder cancer treatments has improved substantially since 2000. The body of work now includes many new models, registry analyses, and real-world studies. However, there is still a need for new implementation guidelines, new risk modeling tools, and a better understanding of the empirical burden of bladder cancer.