Systems analysis on laser beamed power

NASA Technical Reports Server (NTRS)

Zeiders, Glenn W., Jr.

1993-01-01

The NASA SELENE power beaming program is intended to supply cost-effective power to space assets via Earth-based lasers and active optics systems. Key elements of the program are analyzed, the overall effort is reviewed, and recommendations are presented.

Rapid replacement/construction of bridges.

DOT National Transportation Integrated Search

2012-11-01

Bridges are a key element of the transportation system because they control system capacity and are normally built at : the highest cost to the system. Once a bridge reaches its useful design service life, it needs to be replaced or : reconstructed i...

Trade-off between land vehicle antenna cost and gain for satellite mobile communications

NASA Technical Reports Server (NTRS)

1984-01-01

Trade-offs between antenna cost and gain made for nine antennas as a feasibility study for the experimental land mobile satellite system, M-SAT(X) reported. This system is under development by JPL-NASA for a mobile telephone system to be used throughout the continental USA and Alaska. The mobile antenna is a key element in the development of this system.

Method for Controlling Space Transportation System Life Cycle Costs

NASA Technical Reports Server (NTRS)

McCleskey, Carey M.; Bartine, David E.

2006-01-01

A structured, disciplined methodology is required to control major cost-influencing metrics of space transportation systems during design and continuing through the test and operations phases. This paper proposes controlling key space system design metrics that specifically influence life cycle costs. These are inclusive of flight and ground operations, test, and manufacturing and infrastructure. The proposed technique builds on today's configuration and mass properties control techniques and takes on all the characteristics of a classical control system. While the paper does not lay out a complete math model, key elements of the proposed methodology are explored and explained with both historical and contemporary examples. Finally, the paper encourages modular design approaches and technology investments compatible with the proposed method.

Development of a traffic data input system in Arizona for the MEPDG.

DOT National Transportation Integrated Search

2013-10-01

Accurate traffic data is one of the key data elements required for the cost-effective design of all rehabilitation and reconstruction of : pavement structures. This research study addresses the collection, preparation, and use of traffic data require...

Space station needs, attributes and architectural options. Volume 4, task 2 and 3: Mission implementation and cost

NASA Technical Reports Server (NTRS)

1983-01-01

An overview of the basic space station infrastructure is presented. A strong case is made for the evolution of the station using the basic Space Transportation System (STS) to achieve a smooth transition and cost effective implementation. The integrated logistics support (ILS) element of the overall station infrastructure is investigated. The need for an orbital transport system capability that is the key to servicing and spacecraft positioning scenarios and associated mission needs is examined. Communication is also an extremely important element and the basic issue of station autonomy versus ground support effects the system and subsystem architecture.

Satellite Power System (SPS) concept definition study (exhibit C)

NASA Technical Reports Server (NTRS)

Haley, G. M.

1979-01-01

The major outputs of the study are the constructability studies which resulted in the definition of the concepts for satellite, rectenna, and satellite construction base construction. Transportation analyses resulted in definition of heavy-lift launch vehicle, electric orbit transfer vehicle, personnel orbit transfer vehicle, and intra-orbit transfer vehicle as well as overall operations related to transportation systems. The experiment/verification program definition resulted in the definition of elements for the Ground-Based Experimental Research and Key Technology plans. These studies also resulted in conceptual approaches for early space technology verification. The cost analysis defined the overall program and cost data for all program elements and phases.

DOD Financial Management: Effect of Continuing Weaknesses on Management and Operations and Status of Key Challenges

DTIC Science & Technology

2014-05-13

the information needed to effectively (1) manage its assets, (2) assess program performance and make budget decisions , (3) make cost- effective ... decision making, including the information needed to effectively (1) manage its assets, (2) assess program performance and make budget decisions , (3...incorporating key elements of a comprehensive management approach , such as a complete analysis of the return on investment, quantitatively -defined goals

Sourcing in the Air Force: An Optimization Approach

DTIC Science & Technology

2009-09-01

quality supplies and services at the lowest cost ( Gabbard , 2004). The commodity sourcing strategy focuses on developing a specific sourcing strategy...Springer Series in Operations Research. New York: Springer-Verlag. Gabbard , E.G. (2004, April). Strategic sourcing: Critical elements and keys to success

Affordable Development and Demonstration of a Small NTR engine and Stage: A Preliminary NASA, DOE, and Industry Assessment

NASA Technical Reports Server (NTRS)

Borowski, S. K.; Sefcik, R. J.; Fittje, J. E.; McCurdy, D. R.; Qualls, A. L.; Schnitzler, B. G; Werner, J.; Weitzberg, A.; Joyner, C. R.

2015-01-01

In FY'11, Nuclear Thermal Propulsion (NTP) was identified as a key propulsion option under the Advanced In-Space Propulsion (AISP) component of NASA's Exploration Technology Development and Demonstration (ETDD) program A strategy was outlined by GRC and NASA HQ that included 2 key elements -"Foundational Technology Development" followed by specific "Technology Demonstration" projects. The "Technology Demonstration "element proposed ground technology demonstration (GTD) testing in the early 2020's, followed by a flight technology demonstration (FTD) mission by approx. 2025. In order to reduce development costs, the demonstration projects would focus on developing a small, low thrust (approx. 7.5 -16.5 klb(f)) engine that utilizes a "common" fuel element design scalable to the higher thrust (approx. 25 klb(f)) engines used in NASA's Mars DRA 5.0 study(NASA-SP-2009-566). Besides reducing development costs and allowing utilization of existing, flight proven engine hard-ware (e.g., hydrogen pumps and nozzles), small, lower thrust ground and flight demonstration engines can validate the technology and offer improved capability -increased payloads and decreased transit times -valued for robotic science missions identified in NASA's Decadal Study.

Irrigation scheduling: When, where, and how much?

USDA-ARS?s Scientific Manuscript database

Irrigation scheduling, a key element of proper water management, is the accurate forecasting of water application (amount and timing) for optimal crop production (yield and fruit quality). The goal is to apply the correct amount of water at the right time to minimize irrigation costs and maximize cr...

Improving patient-level costing in the English and the German 'DRG' system.

PubMed

Vogl, Matthias

2013-03-01

The purpose of this paper is to develop ways to improve patient-level cost apportioning (PLCA) in the English and German inpatient 'DRG' cost accounting systems, to support regulators in improving costing schemes, and to give clinicians and hospital management sophisticated tools to measure and link their management. The paper analyzes and evaluates the PLCA step in the cost accounting schemes of both countries according to the impact on the key aspects of DRG introduction: transparency and efficiency. The goal is to generate a best available PLCA standard with enhanced accuracy and managerial relevance, the main requirements of cost accounting. A best available PLCA standard in 'DRG' cost accounting uses: (1) the cost-matrix from the German system; (2) a third axis in this matrix, representing service-lines or clinical pathways; (3) a scoring system for key cost drivers with the long-term objective of time-driven activity-based costing and (4) a point of delivery separation. Both systems have elements that the other system can learn from. By combining their strengths, regulators are supported in enhancing PLCA systems, improving the accuracy of national reimbursement and the managerial relevance of inpatient cost accounting systems, in order to reduce costs in health care. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Societal-Equity-Enhancing Criteria and Facility-Host Incentives Supporting Five Key Elements in the January 2012 Blue Ribbon Commission Report - 13015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eriksson, Leif G.; Dials, George E.; George, Critz H.

2013-07-01

In February 2009, the Obama Administration announced it would abandon USA's only candidate SNF/HLW-disposal facility since 1987. In 2010, all related activities were stopped and the Blue Ribbon Commission on America's Nuclear Future was established 'to recommend a new strategy for managing the back end of the nuclear fuel cycle', which it did in January 2012, emphasizing eight key elements. However, Key Element 1, 'A new, consent-based approach to siting future nuclear facilities', is qualitative/indeterminate rather than quantitative/measurable. It is thus highly-susceptible to semantic permutations that could extend rather than, as intended, expedite the siting of future nuclear facilities unlessmore » it also defines: a) Whose consent is needed?; and b) What constitutes consent? The following 'generic', radiation-risk- and societal-equity-based criteria address these questions: 1. Identify areas affected by projected radiation and other health risks from: a. The proposed nuclear facility (facility stakeholders); and b. The related nuclear-materials-transportation routes (transportation stakeholders); then 2. Surround each stakeholder area with a buffer zone and use this enlarged foot print to identify: a. Stakeholder hosts; and b. Areas not hosting any stakeholder category (interested parties). 3. Define 'consent-based' as being at least 60 percent of the 'population' in the respective stakeholder category and apply this yardstick to both 'in favor' and 'against' votes. Although criteria 1 and 2 also need facility-based definitions to make Key Element 1 measurable, the described siting approach, augmented by related facility-host incentives, would expedite the schedule and reduce the cost for achieving Key Elements 4-6 and 8, politics permitting. (authors)« less

Determining your organization's 'risk capability'.

PubMed

Hannah, Bill; Hancock, Melinda

2014-05-01

An assessment of a provider's level of risk capability should focus on three key elements: Business intelligence, including sophisticated analytical models that can offer insight into the expected cost and quality of care for a given population. Clinical enterprise maturity, marked by the ability to improve health outcomes and to manage utilization and costs to drive change. Revenue transformation, emphasizing the need for a revenue cycle platform that allows for risk acceptance and management and that provides incentives for performance against defined objectives.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, L.T.; Hickey, M.

This paper summarizes the progress to date by CH2M HILL and the UKAEA in development of a parametric modelling capability for estimating the costs of large nuclear decommissioning projects in the United Kingdom (UK) and Europe. The ability to successfully apply parametric cost estimating techniques will be a key factor to commercial success in the UK and European multi-billion dollar waste management, decommissioning and environmental restoration markets. The most useful parametric models will be those that incorporate individual components representing major elements of work: reactor decommissioning, fuel cycle facility decommissioning, waste management facility decommissioning and environmental restoration. Models must bemore » sufficiently robust to estimate indirect costs and overheads, permit pricing analysis and adjustment, and accommodate the intricacies of international monetary exchange, currency fluctuations and contingency. The development of a parametric cost estimating capability is also a key component in building a forward estimating strategy. The forward estimating strategy will enable the preparation of accurate and cost-effective out-year estimates, even when work scope is poorly defined or as yet indeterminate. Preparation of cost estimates for work outside the organizations current sites, for which detailed measurement is not possible and historical cost data does not exist, will also be facilitated. (authors)« less

Contextual variations in costs for a community health strategy implemented in rural, peri-urban and nomadic sites in Kenya.

PubMed

Wafula, Charles Ouma; Edwards, Nancy; Kaseje, Dan C O

2017-02-28

Many low and middle income countries have developed community health strategies involving lay health workers, to complement and strengthen public health services. This study explores variations in costing parameters pertinent to deployment of community health volunteers across different contexts outlining considerations for costing program scale-up. The study used quasi experimental study design and employed both quantitative and qualitative methods to explore community health unit implementation activities and costs and compare costs across purposively selected sites that differed socially, economically and ecologically. Data were collected from November 2010 to December 2013 through key informant interviews and focus group discussions. We interviewed 16 key informants (eight District community health strategy focal persons, eight frontline field officers), and eight focus group discussions (four with community health volunteers and four with community health committee) and 560 sets of monthly cost data. Cost data were tabulated using Microsoft Excel. Qualitative data were transcribed and coded using a content analysis framework. Four critical elements: attrition rates for community health volunteers, geography and population density, livelihood opportunity costs and benefits, and social opportunity benefits, drove cost variations across the three sites. Attrition rate was highest in peri-urban site where population is highly mobile and lowest in nomadic site. More households were covered by community health workers in the peri-urban area making per capita costs considerably less than in the nomadic settings where long distances had to be covered to reach sparsely distributed households. Livelihood opportunity costs for Community Health Volunteers were highest in nomadic setting, while peri-urban ones reported substantial employability benefits resulting from training. Social opportunity benefits were highest in rural site. Results show that costs of implementing community health strategy varied due to different area contextual factors in Kenya. This study identified four critical elements that drive cost variations: attrition rates for community health volunteers, geography and population density, livelihood opportunity costs and benefits, and social opportunity benefits. Health programme managers and policy-makers need to pay attention to details of contextual factors in costing for effective implementation of community health strategies.

A Computer-Based Index to Book Reviews in the Physics Literature.

ERIC Educational Resources Information Center

Wynne, Allen

1979-01-01

Describes the production of computer-generated author and key-word-from-title indexes to book reviews in physics: the sources, the processing, and the storage and retrieval system. Data elements available from the indexes include author, title, local call number, publisher, year of imprint, month and year of publication, series, cost, and…

Energy Management for Human Service Agencies. Second Edition.

ERIC Educational Resources Information Center

Academy for Educational Development, Washington, DC.

Concerned about the effect rising energy costs would have on their local affiliates, building consultants for national social welfare agencies have been advocating the initiation of energy management and conservation programs. This manual, a three-part educational and planning tool, is a key element in a program developed to help local agencies…

Bright Ideas: A Total Resource Management Guide for Schools.

ERIC Educational Resources Information Center

Cornwall, Bonnie J.

Reducing school energy costs can increase the discretionary dollars available in the school budget. The first part of this guide introduces the key elements of an effective energy management program. Through an evaluation of nearly 150 California school district programs and a detailed review of 22 exemplary programs, the 12 following elements…

Development of a larval diet for the South American fruit fly Anastrepha fraterculus (Diptera:Tephritidae)

USDA-ARS?s Scientific Manuscript database

Mass-rearing protocols must be developed. In particular, a cost-effective larval diet, to implement the sterile insect technique against Anastrepha fratercculus (Wiedemann). The key elements of this diet are the optimal nutrients and their concentrations, diet supports or bulking agents, and the pH ...

Advancing health system integration through supply chain improvement.

PubMed

Rosser, Mike

2006-01-01

Collaboration is a key element to success in the provision of sustainable and integrated healthcare services. Among the many initiatives undertaken to improve service quality and reduce costs, collaboration among hospitals in Ontario has been difficult to achieve; however, voluntary collaboration is vital to achieving transformation of the magnitude envisioned by system leaders.

Teaching Business Shops and Stores' Locations through Field Studies

ERIC Educational Resources Information Center

Yang, Daihu; Wang, Ziying; Wu, Xianliang; Fu, Wenru

2014-01-01

Location, where geographic elements interwork spatially and dynamically, has been one of the enduring themes in geographic studies. There are a number of location theories to explain why things are located where they are. Alfred Weber's location theory stresses that the least cost of delivering products is a key factor in location selection, and…

Medical cost analysis: application to colorectal cancer data from the SEER Medicare database.

PubMed

Bang, Heejung

2005-10-01

Incompleteness is a key feature of most survival data. Numerous well established statistical methodologies and algorithms exist for analyzing life or failure time data. However, induced censorship invalidates the use of those standard analytic tools for some survival-type data such as medical costs. In this paper, some valid methods currently available for analyzing censored medical cost data are reviewed. Some cautionary findings under different assumptions are envisioned through application to medical costs from colorectal cancer patients. Cost analysis should be suitably planned and carefully interpreted under various meaningful scenarios even with judiciously selected statistical methods. This approach would be greatly helpful to policy makers who seek to prioritize health care expenditures and to assess the elements of resource use.

Determinants of sustainability in solid waste management--the Gianyar Waste Recovery Project in Indonesia.

PubMed

Zurbrügg, Christian; Gfrerer, Margareth; Ashadi, Henki; Brenner, Werner; Küper, David

2012-11-01

According to most experts, integrated and sustainable solid waste management should not only be given top priority, but must go beyond technical aspects to include various key elements of sustainability to ensure success of any solid waste project. Aside from project sustainable impacts, the overall enabling environment is the key feature determining performance and success of an integrated and affordable solid waste system. This paper describes a project-specific approach to assess typical success or failure factors. A questionnaire-based assessment method covers issues of: (i) social mobilisation and acceptance (social element), (ii) stakeholder, legal and institutional arrangements comprising roles, responsibilities and management functions (institutional element); (iii) financial and operational requirements, as well as cost recovery mechanisms (economic element). The Gianyar Waste Recovery Project in Bali, Indonesia was analysed using this integrated assessment method. The results clearly identified chief characteristics, key factors to consider when planning country wide replication but also major barriers and obstacles which must be overcome to ensure project sustainability. The Gianyar project consists of a composting unit processing 60 tons of municipal waste per day from 500,000 inhabitants, including manual waste segregation and subsequent composting of the biodegradable organic fraction. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cost: the missing outcome in simulation-based medical education research: a systematic review.

PubMed

Zendejas, Benjamin; Wang, Amy T; Brydges, Ryan; Hamstra, Stanley J; Cook, David A

2013-02-01

The costs involved with technology-enhanced simulation remain unknown. Appraising the value of simulation-based medical education (SBME) requires complete accounting and reporting of cost. We sought to summarize the quantity and quality of studies that contain an economic analysis of SBME for the training of health professions learners. We performed a systematic search of MEDLINE, EMBASE, CINAHL, ERIC, PsychINFO, Scopus, key journals, and previous review bibliographies through May 2011. Articles reporting original research in any language evaluating the cost of simulation, in comparison with nonstimulation instruction or another simulation intervention, for training practicing and student physicians, nurses, and other health professionals were selected. Reviewers working in duplicate evaluated study quality and abstracted information on learners, instructional design, cost elements, and outcomes. From a pool of 10,903 articles we identified 967 comparative studies. Of these, 59 studies (6.1%) reported any cost elements and 15 (1.6%) provided information on cost compared with another instructional approach. We identified 11 cost components reported, most often the cost of the simulator (n = 42 studies; 71%) and training materials (n = 21; 36%). Ten potential cost components were never reported. The median number of cost components reported per study was 2 (range, 1-9). Only 12 studies (20%) reported cost in the Results section; most reported it in the Discussion (n = 34; 58%). Cost reporting in SBME research is infrequent and incomplete. We propose a comprehensive model for accounting and reporting costs in SBME. Copyright © 2013 Mosby, Inc. All rights reserved.

Contemporary health care economics: an overview.

PubMed

McLaughlin, Nancy; Ong, Michael K; Tabbush, Victor; Hagigi, Farhad; Martin, Neil A

2014-11-01

Economic evaluations provide a decision-making framework in which outcomes (benefits) and costs are assessed for various alternative options. Although the interest in complete and partial economic evaluations has increased over the past 2 decades, the quality of studies has been marginal due to methodological challenges or incomplete cost determination. This paper provides an overview of the main types of complete and partial economic evaluations, reviews key methodological elements to be considered for any economic evaluation, and reviews concepts of cost determination. The goal is to provide the clinician neurosurgeon with the knowledge and tools needed to appraise published economic evaluations and to direct high-quality health economic evaluations.

COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

PubMed

Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

2015-10-01

The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

Large Area X-Ray Spectroscopy Mission

NASA Technical Reports Server (NTRS)

Tananbaum, H.

1997-01-01

The Large Area X-ray Spectroscopy (LAXS) mission concept study continues to evolve strongly following the merging of the LAXS mission with the Next Generation X-ray Observatory (NGXO, PI: Nick White) into the re-named High Throughput X-ray Spectroscopy (HTXS) Mission. HTXS retains key elements of the LAXS proposal, including the use of multiple satellites for risk-reduction and cost savings. A key achievement of the program has been the recommendation by the Structure and Evolution of the Universe (SEUS) (April 1997) for a new start for the HTXS mission in the 2000-2004 timeframe.

Gradient-based stochastic estimation of the density matrix

NASA Astrophysics Data System (ADS)

Wang, Zhentao; Chern, Gia-Wei; Batista, Cristian D.; Barros, Kipton

2018-03-01

Fast estimation of the single-particle density matrix is key to many applications in quantum chemistry and condensed matter physics. The best numerical methods leverage the fact that the density matrix elements f(H)ij decay rapidly with distance rij between orbitals. This decay is usually exponential. However, for the special case of metals at zero temperature, algebraic decay of the density matrix appears and poses a significant numerical challenge. We introduce a gradient-based probing method to estimate all local density matrix elements at a computational cost that scales linearly with system size. For zero-temperature metals, the stochastic error scales like S-(d+2)/2d, where d is the dimension and S is a prefactor to the computational cost. The convergence becomes exponential if the system is at finite temperature or is insulating.

A Systematic Review: Costing and Financing of Water, Sanitation, and Hygiene (WASH) in Schools

PubMed Central

McGinnis, Shannon M.; McKeon, Thomas; Desai, Richa; Ejelonu, Akudo; Laskowski, Stanley; Murphy, Heather M.

2017-01-01

Despite the success of recent efforts to increase access to improved water, sanitation, and hygiene (WASH) globally, approximately one-third of schools around the world still lack adequate WASH services. A lack of WASH in schools can lead to the spread of preventable disease and increase school absences, especially among women. Inadequate financing and budgeting has been named as a key barrier for integrating successful and sustainable WASH programs into school settings. For this reason, the purpose of this review is to describe the current knowledge around the costs of WASH components as well as financing models that could be applied to WASH in schools. Results show a lack of information around WASH costing, particularly around software elements as well as a lack of data overall for WASH in school settings as compared to community WASH. This review also identifies several key considerations when designing WASH budgets or selecting financing mechanisms. Findings may be used to advise future WASH in school programs. PMID:28425945

A Systematic Review: Costing and Financing of Water, Sanitation, and Hygiene (WASH) in Schools.

PubMed

McGinnis, Shannon M; McKeon, Thomas; Desai, Richa; Ejelonu, Akudo; Laskowski, Stanley; Murphy, Heather M

2017-04-20

Despite the success of recent efforts to increase access to improved water, sanitation, and hygiene (WASH) globally, approximately one-third of schools around the world still lack adequate WASH services. A lack of WASH in schools can lead to the spread of preventable disease and increase school absences, especially among women. Inadequate financing and budgeting has been named as a key barrier for integrating successful and sustainable WASH programs into school settings. For this reason, the purpose of this review is to describe the current knowledge around the costs of WASH components as well as financing models that could be applied to WASH in schools. Results show a lack of information around WASH costing, particularly around software elements as well as a lack of data overall for WASH in school settings as compared to community WASH. This review also identifies several key considerations when designing WASH budgets or selecting financing mechanisms. Findings may be used to advise future WASH in school programs.

Exponential convergence through linear finite element discretization of stratified subdomains

NASA Astrophysics Data System (ADS)

Guddati, Murthy N.; Druskin, Vladimir; Vaziri Astaneh, Ali

2016-10-01

Motivated by problems where the response is needed at select localized regions in a large computational domain, we devise a novel finite element discretization that results in exponential convergence at pre-selected points. The key features of the discretization are (a) use of midpoint integration to evaluate the contribution matrices, and (b) an unconventional mapping of the mesh into complex space. Named complex-length finite element method (CFEM), the technique is linked to Padé approximants that provide exponential convergence of the Dirichlet-to-Neumann maps and thus the solution at specified points in the domain. Exponential convergence facilitates drastic reduction in the number of elements. This, combined with sparse computation associated with linear finite elements, results in significant reduction in the computational cost. The paper presents the basic ideas of the method as well as illustration of its effectiveness for a variety of problems involving Laplace, Helmholtz and elastodynamics equations.

Operations management: a tool to increase profitability.

PubMed

Mulvehill, M J

2001-03-01

Operations management enables the efficient utilization of the production systems in a business. This paper will address several key elements in the business competency of operations management. Specifically, this discussion will review the components of a material requirement planning system and a "just-in-time" system for inventory control and time management to enable the dentist to monitor a portion of the practice's overhead costs.

Instrumentation for optimizing an underground coal-gasification process

NASA Astrophysics Data System (ADS)

Seabaugh, W.; Zielinski, R. E.

1982-06-01

While the United States has a coal resource base of 6.4 trillion tons, only seven percent is presently recoverable by mining. The process of in-situ gasification can recover another twenty-eight percent of the vast resource, however, viable technology must be developed for effective in-situ recovery. The key to this technology is system that can optimize and control the process in real-time. An instrumentation system is described that optimizes the composition of the injection gas, controls the in-situ process and conditions the product gas for maximum utilization. The key elements of this system are Monsanto PRISM Systems, a real-time analytical system, and a real-time data acquisition and control system. This system provides from complete automation of the process but can easily be overridden by manual control. The use of this cost effective system can provide process optimization and is an effective element in developing a viable in-situ technology.

Using standard treatment protocols to manage costs and quality of hospital services.

PubMed

Meyer, J W; Feingold, M G

1993-06-01

The current health care environment has made it critically important that hospital costs and quality be managed in an integrated fashion. Promised health care reforms are expected to make cost reduction and quality enhancement only more important. Traditional methods of hospital cost and quality control have largely been replaced by such approaches as practice parameters, outcomes measurement, clinical indicators, clinical paths, benchmarking, patient-centered care, and a focus on patient selection criteria. This Special Report describes an integrated process for strategically managing costs and quality simultaneously, incorporating key elements of many important new quality and cost control tools. By using a multidisciplinary group process to develop standard treatment protocols, hospitals and their medical staffs address the most important services provided within major product lines. Using both clinical and financial data, groups of physicians, nurses, department managers, financial analysts, and administrators redesign key patterns of care within their hospital, incorporating the best practices of their own and other institutions. The outcome of this process is a new, standardized set of clinical guidelines that reduce unnecessary variation in care, eliminate redundant interventions, establish clear lines of communication for all caregivers, and reduce the cost of each stay. The hospital, medical staff, and patients benefit from the improved opportunities for managed care contracting, more efficient hospital systems, consensus-based quality measures, and reductions in the cost of care. STPs offer a workable and worthwhile approach to positioning the hospital of the 1990s for operational efficiency and cost and quality competitiveness.

Predicting Production Costs for Advanced Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Bao, Han P.; Samareh, J. A.; Weston, R. P.

2002-01-01

For early design concepts, the conventional approach to cost is normally some kind of parametric weight-based cost model. There is now ample evidence that this approach can be misleading and inaccurate. By the nature of its development, a parametric cost model requires historical data and is valid only if the new design is analogous to those for which the model was derived. Advanced aerospace vehicles have no historical production data and are nowhere near the vehicles of the past. Using an existing weight-based cost model would only lead to errors and distortions of the true production cost. This paper outlines the development of a process-based cost model in which the physical elements of the vehicle are soared according to a first-order dynamics model. This theoretical cost model, first advocated by early work at MIT, has been expanded to cover the basic structures of an advanced aerospace vehicle. Elemental costs based on the geometry of the design can be summed up to provide an overall estimation of the total production cost for a design configuration. This capability to directly link any design configuration to realistic cost estimation is a key requirement for high payoff MDO problems. Another important consideration in this paper is the handling of part or product complexity. Here the concept of cost modulus is introduced to take into account variability due to different materials, sizes, shapes, precision of fabrication, and equipment requirements. The most important implication of the development of the proposed process-based cost model is that different design configurations can now be quickly related to their cost estimates in a seamless calculation process easily implemented on any spreadsheet tool.

Communications systems technology assessment study. Volume 2: Results

NASA Technical Reports Server (NTRS)

Kelley, R. L.; Khatri, R. K.; Kiesling, J. D.; Weiss, J. A.

1977-01-01

The cost and technology characteristics are examined for providing special satellite services at UHF, 2.5 GHz, and 14/12 GHz. Considered are primarily health, educational, informational and emergency disaster type services. The total cost of each configuration including space segment, earth station, installation operation and maintenance was optimized to reduce the user's total annual cost and establish preferred equipment performance parameters. Technology expected to be available between now and 1985 is identified and comparisons made between selected alternatives. A key element of the study is a survey of earth station equipment updating past work in the field, providing new insight into technology, and evaluating production and test methods that can reduce costs in large production runs. Various satellite configurations were examined. The cost impact of rain attenuation at Ku-band was evaluated. The factors affecting the ultimate capacity achievable with the available orbital arc and available bandwidth were analyzed.

Cost-efficiency trade-off and the design of thermoelectric power generators.

PubMed

Yazawa, Kazuaki; Shakouri, Ali

2011-09-01

The energy conversion efficiency of today's thermoelectric generators is significantly lower than that of conventional mechanical engines. Almost all of the existing research is focused on materials to improve the conversion efficiency. Here we propose a general framework to study the cost-efficiency trade-off for thermoelectric power generation. A key factor is the optimization of thermoelectric modules together with their heat source and heat sinks. Full electrical and thermal co-optimization yield a simple analytical expression for optimum design. Based on this model, power output per unit mass can be maximized. We show that the fractional area coverage of thermoelectric elements in a module could play a significant role in reducing the cost of power generation systems.

Grayscale photomask fabricated by laser direct writing in metallic nano-films.

PubMed

Guo, Chuan Fei; Cao, Sihai; Jiang, Peng; Fang, Ying; Zhang, Jianming; Fan, Yongtao; Wang, Yongsheng; Xu, Wendong; Zhao, Zhensheng; Liu, Qian

2009-10-26

The grayscale photomask plays a key role in grayscale lithography for creating 3D microstructures like micro-optical elements and MEMS structures, but how to fabricate grayscale masks in a cost-effective way is still a big challenge. Here we present novel low cost grayscale masks created in a two-step method by laser direct writing on Sn nano-films, which demonstrate continuous-tone gray levels depended on writing powers. The mechanism of the gray levels is due to the coexistence of the metal and the oxides formed in a laser-induced thermal process. The photomasks reveal good technical properties in fabricating 3D microstructures for practical applications.

Composite fuselage crown panel manufacturing technology

NASA Technical Reports Server (NTRS)

Willden, Kurtis; Metschan, S.; Grant, C.; Brown, T.

1992-01-01

Commercial fuselage structures contain significant challenges in attempting to save manufacturing costs with advanced composite technology. Assembly issues, materials costs, and fabrication of elements with complex geometry are each expected to drive the cost of composite fuselage structure. Key technologies, such as large crown panel fabrication, were pursued for low cost. An intricate bond panel design and manufacturing concept were selected based on the efforts of the Design Build Team. The manufacturing processes selected for the intricate bond design include multiple large panel fabrication with Advanced Tow Placement (ATP) process, innovative cure tooling concepts, resin transfer molding of long fuselage frames, and use of low cost materials forms. The process optimization for final design/manufacturing configuration included factory simulations and hardware demonstrations. These efforts and other optimization tasks were instrumental in reducing costs by 18 pct. and weight by 45 pct. relative to an aluminum baseline. The qualitative and quantitative results of the manufacturing demonstrations were used to assess manufacturing risks and technology readiness.

Mental health care in Italy: organisational structure, routine clinical activity and costs of a community psychiatric service in Lombardy region.

PubMed

Fattore, G; Percudani, M; Pugnoli, C; Contini, A; Beecham, J

2000-01-01

The Magenta Community Mental Health Centre (CMHC) is the public agency responsible for providing adult psychiatric care to about 85,000 adult residents. In 1995, it had 1,145 clients and incurred costs of Euro 1.9 millions. Average cost per patient and per adult resident were Euro 1,661 and Euro 22.2, respectively. These values mask large variation across diagnosis: while patients with schizophrenia and related disorders had an average cost of Euro 3,771, those with neurotic and related disorders had an average cost of Euro 439. Patients with schizophrenia and related disorders (28% of the patients) absorbed about 60% of total costs and made extensive use of several types of services (hospital, outpatient, domiciliary, social and rehabilitative care). Since integrating different types of services is the key element of Italian psychiatric care, the new fee-for-service system adopted by the NHS to fund providers does not appear appropriate, particularly for schizophrenic patients.

Composite fuselage crown panel manufacturing technology

NASA Technical Reports Server (NTRS)

Willden, Kurtis; Metschan, S.; Grant, C.; Brown, T.

1992-01-01

Commercial fuselage structures contain significant challenges in attempting to save manufacturing costs with advanced composite technology. Assembly issues, material costs, and fabrication of elements with complex geometry are each expected to drive the cost of composite fuselage structures. Boeing's efforts under the NASA ACT program have pursued key technologies for low-cost, large crown panel fabrication. An intricate bond panel design and manufacturing concepts were selected based on the efforts of the Design Build Team (DBT). The manufacturing processes selected for the intricate bond design include multiple large panel fabrication with the Advanced Tow Placement (ATP) process, innovative cure tooling concepts, resin transfer molding of long fuselage frames, and utilization of low-cost material forms. The process optimization for final design/manufacturing configuration included factory simulations and hardware demonstrations. These efforts and other optimization tasks were instrumental in reducing cost by 18 percent and weight by 45 percent relative to an aluminum baseline. The qualitative and quantitative results of the manufacturing demonstrations were used to assess manufacturing risks and technology readiness.

Key Elements of a Low Voltage, Ultracompact Plasma Spectrometer

NASA Technical Reports Server (NTRS)

Scime, E. E.; Barrie, A.; Dugas, M.; Elliott, D.; Ellison, S.; Keesee, A. M.; Pollock, C. J.; Rager, A.; Tersteeg, J.

2016-01-01

Taking advantage of technological developments in wafer-scale processing over the past two decades, such as deep etching, 3-D chip stacking, and double-sided lithography, we have designed and fabricated the key elements of an ultracompact 1.5cm (exp 3)plasma spectrometer that requires only low-voltage power supplies, has no microchannel plates, and has a high aperture area to instrument volume ratio. The initial design of the instrument targets the measurement of charged particles in the 3-20keV range with a highly directional field of view and a 100 duty cycle; i.e., the entire energy range Is continuously measured. In addition to reducing mass, size, and voltage requirements, the new design will affect the manufacturing process of plasma spectrometers, enabling large quantities of identical instruments to be manufactured at low individual unit cost. Such a plasma spectrometer is ideal for heliophysics plasma investigations, particularly for small satellite and multispacecraft missions. Two key elements of the instrument have been fabricated: the collimator and the energy analyzer. An initial collimator transparency of 20 with 3deg x 3deg angular resolution was achieved. The targeted 40 collimator transparency appears readily achievable. The targeted energy analyzer scaling factor of 1875 was achieved; i.e.20 keV electrons were selected for only a 10.7V bias voltage in the energy analyzer.

NASA policy on pricing shuttle launch services

NASA Technical Reports Server (NTRS)

Smith, J. M.

1977-01-01

The paper explains the rationale behind key elements of the pricing policy for STS, the major features of the non-government user policy, and some of the stimulating features of the policy which will open space to a wide range of new users. Attention is given to such major policy features as payment schedule, cost and standard services, the two phase pricing structure, optional services, shared flights, cancellation and postponement, and earnest money.

A Methodological Review of US Budget-Impact Models for New Drugs.

PubMed

Mauskopf, Josephine; Earnshaw, Stephanie

2016-11-01

A budget-impact analysis is required by many jurisdictions when adding a new drug to the formulary. However, previous reviews have indicated that adherence to methodological guidelines is variable. In this methodological review, we assess the extent to which US budget-impact analyses for new drugs use recommended practices. We describe recommended practice for seven key elements in the design of a budget-impact analysis. Targeted literature searches for US studies reporting estimates of the budget impact of a new drug were performed and we prepared a summary of how each study addressed the seven key elements. The primary finding from this review is that recommended practice is not followed in many budget-impact analyses. For example, we found that growth in the treated population size and/or changes in disease-related costs expected during the model time horizon for more effective treatments was not included in several analyses for chronic conditions. In addition, all drug-related costs were not captured in the majority of the models. Finally, for most studies, one-way sensitivity and scenario analyses were very limited, and the ranges used in one-way sensitivity analyses were frequently arbitrary percentages rather than being data driven. The conclusions from our review are that changes in population size, disease severity mix, and/or disease-related costs should be properly accounted for to avoid over- or underestimating the budget impact. Since each budget holder might have different perspectives and different values for many of the input parameters, it is also critical for published budget-impact analyses to include extensive sensitivity and scenario analyses based on realistic input values.

Lunar Prospector: developing a very low cost planetary mission.

NASA Astrophysics Data System (ADS)

Hubbard, G. S.

Lunar Prospector, the first competitively selected planetary mission in NASA's Discovery Program, is described with emphasis on the lessons learned from managing a very low cost project. Insights into government-industry teaming, project management, contractual arrangements, schedule and budget reserve approach are discussed. The mission is conducting an orbital survey of the Moon's composition and structure. A mission overview and scientific data return is briefly described in the context of low cost mission development. The suite of five instruments is outlined: neutron spectrometer (NS), alpha particle spectrometer (APS), gamma ray spectrometer (GRS), magnetometer (MAG) and an electron reflectometer (ER). Scientific requirements and measurement approaches to detect water ice to a sensitivity of 50 ppm (hydrogen), measure key elemental constituents, detect gas release events and accurately map the Moon's gravitational and magnetic fields are described.

Determinants of sustainability in solid waste management - The Gianyar Waste Recovery Project in Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zurbruegg, Christian, E-mail: zurbrugg@eawag.ch; Gfrerer, Margareth, E-mail: margareth.gfrerer@gmx.net; Ashadi, Henki, E-mail: henki@eng.ui.ac.id

2012-11-15

Highlights: Black-Right-Pointing-Pointer Our assessment tool helps evaluate success factors in solid waste projects. Black-Right-Pointing-Pointer Success of the composting plant in Indonesia is linked to its community integration. Black-Right-Pointing-Pointer Appropriate technology is not a main determining success factor for sustainability. Black-Right-Pointing-Pointer Structured assessment of 'best practices' can enhance replication in other cities. - Abstract: According to most experts, integrated and sustainable solid waste management should not only be given top priority, but must go beyond technical aspects to include various key elements of sustainability to ensure success of any solid waste project. Aside from project sustainable impacts, the overall enabling environmentmore » is the key feature determining performance and success of an integrated and affordable solid waste system. This paper describes a project-specific approach to assess typical success or failure factors. A questionnaire-based assessment method covers issues of: (i) social mobilisation and acceptance (social element), (ii) stakeholder, legal and institutional arrangements comprising roles, responsibilities and management functions (institutional element); (iii) financial and operational requirements, as well as cost recovery mechanisms (economic element). The Gianyar Waste Recovery Project in Bali, Indonesia was analysed using this integrated assessment method. The results clearly identified chief characteristics, key factors to consider when planning country wide replication but also major barriers and obstacles which must be overcome to ensure project sustainability. The Gianyar project consists of a composting unit processing 60 tons of municipal waste per day from 500,000 inhabitants, including manual waste segregation and subsequent composting of the biodegradable organic fraction.« less

Low-cost passive UHF RFID tags on paper substrates

NASA Astrophysics Data System (ADS)

Sajal, Sayeed Zebaul Haque

To reduce the significant cost in the widespread deployment of UHF radio frequency identification (RFID) systems, an UHF RFID tag design is presented on paper substrates. The design is based on meander-line miniaturization techniques and open complementary split ring resonator (OCSRR) elements that reduce required conducting materials by 30%. Another passive UHF RFID tag is designed to sense the moisture based on the antenna's polarization. An inexpensive paper substrate and copper layer are used for flexibility and low-cost. The key characteristic of this design is the sensitivity of the antenna's polarization on the passive RFID tag to the moisture content in the paper substrate. In simulations, the antenna is circularly-polarized when the substrate is dry and is linearly-polarized when the substrate is wet. It was shown that the expected read-ranges and desired performance could be achieved reducing the over-all cost of the both designs.

Insecticide Resistance and Malaria Vector Control: The Importance of Fitness Cost Mechanisms in Determining Economically Optimal Control Trajectories

PubMed Central

Brown, Zachary S.; Dickinson, Katherine L.; Kramer, Randall A.

2014-01-01

The evolutionary dynamics of insecticide resistance in harmful arthropods has economic implications, not only for the control of agricultural pests (as has been well studied), but also for the control of disease vectors, such as malaria-transmitting Anopheles mosquitoes. Previous economic work on insecticide resistance illustrates the policy relevance of knowing whether insecticide resistance mutations involve fitness costs. Using a theoretical model, this article investigates economically optimal strategies for controlling malaria-transmitting mosquitoes when there is the potential for mosquitoes to evolve resistance to insecticides. Consistent with previous literature, we find that fitness costs are a key element in the computation of economically optimal resistance management strategies. Additionally, our models indicate that different biological mechanisms underlying these fitness costs (e.g., increased adult mortality and/or decreased fecundity) can significantly alter economically optimal resistance management strategies. PMID:23448053

Managed Behavioral Health Care: An Instrument to Characterize Critical Elements of Public Sector Programs

PubMed Central

Ridgely, M Susan; Giard, Julienne; Shern, David; Mulkern, Virginia; Burnam, M Audrey

2002-01-01

Objective To develop an instrument to characterize public sector managed behavioral health care arrangements to capture key differences between managed and “unmanaged” care and among managed care arrangements. Study Design The instrument was developed by a multi-institutional group of collaborators with participation of an expert panel. Included are six domains predicted to have an impact on access, service utilization, costs, and quality. The domains are: characteristics of the managed care plan, enrolled population, benefit design, payment and risk arrangements, composition of provider networks, and accountability. Data are collected at three levels: managed care organization, subcontractor, and network of service providers. Data Collection Methods Data are collected through contract abstraction and key informant interviews. A multilevel coding scheme is used to organize the data into a matrix along key domains, which is then reviewed and verified by the key informants. Principal Findings This instrument can usefully differentiate between and among Medicaid fee-for-service programs and Medicaid managed care plans along key domains of interest. Beyond documenting basic features of the plans and providing contextual information, these data will support the refinement and testing of hypotheses about the impact of public sector managed care on access, quality, costs, and outcomes of care. Conclusions If managed behavioral health care research is to advance beyond simple case study comparisons, a well-conceptualized set of instruments is necessary. PMID:12236386

Nuclear Thermal Rocket Element Environmental Simulator (NTREES) Upgrade Activities

NASA Technical Reports Server (NTRS)

Emrich, William

2013-01-01

A key technology element in Nuclear Thermal Propulsion is the development of fuel materials and components which can withstand extremely high temperatures while being exposed to flowing hydrogen. NTREES provides a cost effective method for rapidly screening of candidate fuel components with regard to their viability for use in NTR systems. The NTREES is designed to mimic the conditions (minus the radiation) to which nuclear rocket fuel elements and other components would be subjected to during reactor operation. The NTREES consists of a water cooled ASME code stamped pressure vessel and its associated control hardware and instrumentation coupled with inductive heaters to simulate the heat provided by the fission process. The NTREES has been designed to safely allow hydrogen gas to be injected into internal flow passages of an inductively heated test article mounted in the chamber.

Enabling large-scale forest restoration in Minas Gerais state, Brazil

NASA Astrophysics Data System (ADS)

Nunes, Felipe S. M.; Soares-Filho, Britaldo S.; Rajão, Raoni; Merry, Frank

2017-04-01

Large-scale forest restoration is a cornerstone of Brazil’s new Forest Code and a key element in its National Determined Contribution (NDC) to emissions reduction. But the path to this target remains unclear due to a lack of information on its economics and implementation challenges. Here, we begin to fill this gap by developing a spatially-explicit model for Minas Gerais state that estimates the costs and benefits of native vegetation regeneration under different restoration approaches. Our results show that 36% (0.7 million ha) of the Forest Code debt in Minas Gerais can be restored using only passive restoration, at a cost of US 175 ± 47 million. Adding low-cost assisted natural regeneration would increase that number to 75% (1.5 million ha) at a cost of US 776 ± 137 million over a 20 yr period. This would result in a potential sequestration of 284 MtCO2e. However, including the intensive planting methods needed to restore the remaining 25% of highly degraded areas—to fully solve the Forest Code debt and result in a potential sequestration of 345 MtCO2e—would more than double the costs to US 1.7 ± 0.3 billion. Our results emphasize the need to implement regional policies that take advantage of the natural regeneration potential as well as prioritize the restoration of areas key to ecosystem services.

Evaluation of solar cells and arrays for potential solar power satellite applications

NASA Technical Reports Server (NTRS)

Almgren, D. W.; Csigi, K.; Gaudet, A. D.

1978-01-01

Proposed solar array designs and manufacturing methods are evaluated to identify options which show the greatest promise of leading up to the develpment of a cost-effective SPS solar cell array design. The key program elements which have to be accomplished as part of an SPS solar cell array development program are defined. The issues focussed on are: (1) definition of one or more designs of a candidate SPS solar array module, using results from current system studies; (2) development of the necessary manufacturing requirements for the candidate SPS solar cell arrays and an assessment of the market size, timing, and industry infrastructure needed to produce the arrays for the SPS program; (3) evaluation of current DOE, NASA and DOD photovoltaic programs to determine the impacts of recent advances in solar cell materials, array designs and manufacturing technology on the candidate SPS solar cell arrays; and (4) definition of key program elements for the development of the most promising solar cell arrays for the SPS program.

Automated Developmental Disabilities Out-Patient Treatment Review System (ADDOPTRS)—Development and Automation of a Microcomputer Based Case Management System

PubMed Central

Fisch, Clifford B.; Fisch, Martin L.

1979-01-01

The Stanley S. Lamm Institute for Developmental Disabilities of The Long Island College Hospital, in conjunction with Micro-Med Systems has developed a low cost micro-computer based information system (ADDOP TRS) which monitors quality of care in outpatient settings rendering services to the developmentally disabled population. The process of conversion from paper record keeping systems to direct key-to-disk data capture at the point of service delivery is described. Data elements of the information system including identifying patient information, coded and English-grammar entry procedures for tracking elements of service as well as their delivery status are described. Project evaluation criteria are defined including improved quality of care, improved productivity for clerical and professional staff and enhanced decision making capability. These criteria are achieved in a cost effective manner as a function of more efficient information flow. Administrative applications including staff/budgeting procedures, submissions for third party reimbursement and case reporting to utilization review committees are considered.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Hirt, Evelyn H.; Coles, Garill A.

Advanced small modular reactors (AdvSMRs) can contribute to safe, sustainable, and carbon-neutral energy production. The economics of small reactors (including AdvSMRs) will be impacted by the reduced economy-of-scale savings when compared to traditional light water reactors. The most significant controllable element of the day-to-day costs involves operations and maintenance (O&M). Enhancing affordability of AdvSMRs through technologies that help control O&M costs will be critical to ensuring their practicality for wider deployment.A significant component of O&M costs is the management and mitigation of degradation of components due to their impact on planning maintenance activities and staffing levels. Technologies that help characterizemore » real-time risk of failure of key components are important in this context. Given the possibility of frequently changing AdvSMR plant configurations, approaches are needed to integrate three elements – advanced plant configuration information, equipment condition information, and risk monitors – to provide a measure of risk that is customized for each AdvSMR unit and support real-time decisions on O&M. This article describes an overview of ongoing research into diagnostics/prognostics and enhanced predictive risk monitors (ERM) for this purpose.« less

Defense AT and L. Volume 44, Number 6, November-December 2015: Where Have All the Nunn-McCurdys Gone

DTIC Science & Technology

2015-11-01

must integrate with complex communications and information networks that involve specialized technical expertise in order to be effective. These...and control system programs that had to integrate into multiple networks and required interoperability with joint and coalition partners, some with...Selection Brian Schultz and David Dotson Competition is a key element in acquisition, but greater value is not always tied to lower prices or cost

The Manufacture of W-UO2 Fuel Elements for NTP Using the Hot Isostatic Pressing Consolidation Process

NASA Technical Reports Server (NTRS)

Broadway, Jeramie; Hickman, Robert; Mireles, Omar

2012-01-01

NTP is attractive for space exploration because: (1) Higher Isp than traditional chemical rockets (2)Shorter trip times (3) Reduced propellant mass (4) Increased payload. Lack of qualified fuel material is a key risk (cost, schedule, and performance). Development of stable fuel form is a critical path, long lead activity. Goals of this project are: Mature CERMET and Graphite based fuel materials and Develop and demonstrate critical technologies and capabilities.

Wildlife as Source of Zoonotic Infections

PubMed Central

Kirkemo, Anne-Mette; Handeland, Kjell

2004-01-01

Zoonoses with a wildlife reservoir represent a major public health problem, affecting all continents. Hundreds of pathogens and many different transmission modes are involved, and many factors influence the epidemiology of the various zoonoses. The importance and recognition of wildlife as a reservoir of zoonoses are increasing. Cost-effective prevention and control of these zoonoses necessitate an interdisciplinary and holistic approach and international cooperation. Surveillance, laboratory capability, research, training and education, and communication are key elements. PMID:15663840

Point-Focus Concentration Compact Telescoping Array: Extreme Environments Solar Power Base Phase Final Report

NASA Technical Reports Server (NTRS)

McEachen, Michael E.; Murphy, Dave; Meinhold, Shen; Spink, Jim; Eskenazi, Mike; O'Neill, Mark

2017-01-01

Orbital ATK, in partnership with Mark ONeill LLC (MOLLC), has developed a novel solar array platform, PFC-CTA, which provides a significant advance in performance and cost reduction compared to all currently available space solar systems. PFC refers to the Point Focus Concentration of light provided by MOLLCs thin, flat Fresnel optics. These lenses focus light to a point of approximately 100 times the intensity of the ambient light, onto a solar cell of approximately 125th the size of the lens. CTA stands for Compact Telescoping Array, which is the solar array blanket structural platform originally devised by NASA and currently being advanced by Orbital ATK and partners under NASA and AFRL funding to a projected TRL 5+ by late-2018.The NASA Game Changing Development Extreme Environment Solar Power (EESP) Base Phase study has enabled Orbital ATK to refine component designs, perform component level and system performance analyses, and test prototype hardware of the key elements of PFC-CTA, and increased the TRL of PFC-specific technology elements to TRL 4. Key performance metrics currently projected are as follows: Scalability from 5 kW to 300 kW per wing (AM0); Specific Power 500 Wkg (AM0); Stowage Efficiency 100 kWm3; 5:1 margin on pointing tolerance vs. capability; 50 launched cost savings; Wide range of operability between Venus and Saturn by active andor passive thermal management.

Key Topics for High-Lift Research: A Joint Wind Tunnel/Flight Test Approach

NASA Technical Reports Server (NTRS)

Fisher, David; Thomas, Flint O.; Nelson, Robert C.

1996-01-01

Future high-lift systems must achieve improved aerodynamic performance with simpler designs that involve fewer elements and reduced maintenance costs. To expeditiously achieve this, reliable CFD design tools are required. The development of useful CFD-based design tools for high lift systems requires increased attention to unresolved flow physics issues. The complex flow field over any multi-element airfoil may be broken down into certain generic component flows which are termed high-lift building block flows. In this report a broad spectrum of key flow field physics issues relevant to the design of improved high lift systems are considered. It is demonstrated that in-flight experiments utilizing the NASA Dryden Flight Test Fixture (which is essentially an instrumented ventral fin) carried on an F-15B support aircraft can provide a novel and cost effective method by which both Reynolds and Mach number effects associated with specific high lift building block flows can be investigated. These in-flight high lift building block flow experiments are most effective when performed in conjunction with coordinated ground based wind tunnel experiments in low speed facilities. For illustrative purposes three specific examples of in-flight high lift building block flow experiments capable of yielding a high payoff are described. The report concludes with a description of a joint wind tunnel/flight test approach to high lift aerodynamics research.

Analysis of hospital costs as a basis for pricing services in Mali.

PubMed

Audibert, Martine; Mathonnat, Jacky; Pareil, Delphine; Kabamba, Raymond

2007-01-01

In a move to achieve a better equity in the funding of access to health care, particularly for the poor, a better efficiency of hospital functioning and a better financial balance, the analysis of hospital costs in Mali brings several key elements to improve the pricing of medical services. The method utilized is the classical step-down process which takes into consideration the entire set of direct and indirect costs borne by the hospital. Although this approach does not allow to estimate the economic cost of consultations, it is a useful contribution to assess the financial activity of the hospital and improve its performance, financially speaking, through a more relevant user fees policy. The study shows that there are possibilities of cross-subsidies within the hospital or within services which improve the recovery of some of the current costs. It also leads to several proposals of pricing care while taking into account the constraints, the level of the hospital its specific conditions and equity. Copyright (c) 2007 John Wiley & Sons, Ltd.

A STUDY ON THE HIERARCHY OF MANAGEMENT ELEMENTS

NASA Astrophysics Data System (ADS)

Suzuki, Nobuyuki; Watanabe, Tadashi

Compared to the late 20th century, the Japanese construction industry has drastically changed its business methodology, outlook and approach in response to global issues and the incredible advances in technology. Such influences, non-exhaustively include the; WTO Government procurement agreement, updating conditions of tendering and contracting, client demands for cost reduction and the rapid penetration of ICT (Information and Communication Technology) into modern society. These days, the significance of controlling Quality, Cost and Time (the so-called QCT) has been recognized as an eternal-triangle by almost all countries, Government organizations and the private sector. However, as the construction industry is exposed to , and influenced by, more and more internal and external dynamic factors, continued reliance on managing and controlling QCT elements on their own is no longer adequate in meeting the growing demands and expectations, and as such control of additional management elements is now essential to avoid problems, or minimize their potential impacts should they occur. This paper utilizes the results of a survey carried out amongst construction managers and consultants in Japan and overseas to develop a spatial network that defines the interaction of management factors as a weighted graphical model. The calculated closeness centrality index of the developed management network model is adopted to identify the initialelement hierarchy, which is then further analyzed using the minimum distance of independent relationships of management elements (Warshall-Floyd algorism methodology), to identify the optimum potential hierarchy for effective construction management. A key result of the analysis is the significance of "Human Resource" in the construction industry management element hierarchy alongside the traditional QCT elements.

Nanophotonic projection system.

PubMed

Aflatouni, Firooz; Abiri, Behrooz; Rekhi, Angad; Hajimiri, Ali

2015-08-10

Low-power integrated projection technology can play a key role in development of low-cost mobile devices with built-in high-resolution projectors. Low-cost 3D imaging and holography systems are also among applications of such a technology. In this paper, an integrated projection system based on a two-dimensional optical phased array with fast beam steering capability is reported. Forward biased p-i-n phase modulators with 200MHz bandwidth are used per each array element for rapid phase control. An optimization algorithm is implemented to compensate for the phase dependent attenuation of the p-i-n modulators. Using rapid vector scanning technique, images were formed and recorded within a single snapshot of the IR camera.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yazawa, Kazuaki; Shakouri, Ali

The energy conversion efficiency of today’s thermoelectric generators is significantly lower than that of conventional mechanical engines. Almost all of the existing research is focused on materials to improve the conversion efficiency. Here we propose a general framework to study the cost-efficiency trade-off for thermoelectric power generation. A key factor is the optimization of thermoelectric modules together with their heat source and heat sinks. Full electrical and thermal co-optimization yield a simple analytical expression for optimum design. Based on this model, power output per unit mass can be maximized. We show that the fractional area coverage of thermoelectric elements inmore » a module could play a significant role in reducing the cost of power generation systems.« less

Managing risks and hazardous in industrial operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almaula, S.C.

1996-12-31

The main objective of this paper is to demonstrate that it makes good business sense to identify risks and hazards of an operation and take appropriate steps to manage them effectively. Developing and implementing an effective risk and hazard management plan also contibutes to other industry requirements and standards. Development of a risk management system, key elements of a risk management plan, and hazards and risk analysis methods are outlined. Comparing potential risk to the cost of prevention is also discussed. It is estimated that the cost of developing and preparing the first risk management plan varies between $50,000 tomore » $200,000. 3 refs., 2 figs., 1 tab.« less

Processor Would Find Best Paths On Map

NASA Technical Reports Server (NTRS)

Eberhardt, Silvio P.

1990-01-01

Proposed very-large-scale integrated (VLSI) circuit image-data processor finds path of least cost from specified origin to any destination on map. Cost of traversal assigned to each picture element of map. Path of least cost from originating picture element to every other picture element computed as path that preserves as much as possible of signal transmitted by originating picture element. Dedicated microprocessor at each picture element stores cost of traversal and performs its share of computations of paths of least cost. Least-cost-path problem occurs in research, military maneuvers, and in planning routes of vehicles.

Civilian Radioactive Waste Management System Requirements Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

C.A. Kouts

2006-05-10

The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible formore » design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further defining system element functions, decomposing requirements into significantly greater detail, and developing designs of system components, facilities, and equipment. The CRD addresses the identification and control of functional, physical, and operational boundaries between and within CRWMS elements. The CRD establishes requirements regarding key interfaces between the CRWMS and elements external to the CRWMS. Project elements define interfaces between CRWMS program elements. The Program has developed a change management process consistent with DOE Order 413.3-Change 1. Changes to the Secretarial Acquisition Executive and Program-level baselines must be approved by a Program Baseline Change Control Board. Specific thresholds have been established for identifying technical, cost, and schedule changes that require approval. The CRWMS continually evaluates system design and operational concepts to optimize performance and/or cost. The Program has developed systems analysis tools to assess potential enhancements to the physical system and to determine the impacts from cost saving initiatives, scientific and technological improvements, and engineering developments. The results of systems analyses, if appropriate, are factored into revisions to the CRD as revised Programmatic Requirements.« less

Redox potential trend with transition metal elements in lithium-ion battery cathode materials

NASA Astrophysics Data System (ADS)

Chen, Zhenlian; Li, Jun

2013-03-01

First-principles calculations are performed to investigate the relationship between the intrinsic voltage and element-lattice for the popular transition metal oxides and polyoxyanionic compounds as cathode materials for lithium-ion batteries. A V-shape redox potential in olivine phosphates LiMPO4 and orthogonal silicates Li2MSiO4 (M =Mn, Fe, Co, Ni), and an N-shape one in layered oxides LiMO2 (M =Mn, Fe, Co, Ni, Cu) relative to transition metal M elements are found to be inversely characteristic of electronic energy contribution, which costs energy in the lithiation process and is defined as electron affinity. The maxima of electron affinity, locating at different elements for different types of crystal lattices are determined by delectronic configurations that cross the turning point of a full occupancy of electronic bands, which is determined by the cooperative effect of crystal field splitting and intraionic exchange interactions. The Ningbo Key Innovation Team, National Natural Science Foundation of China, Postdoctoral Foundation of China

Intelligence by design in an entropic power grid

NASA Astrophysics Data System (ADS)

Negrete-Pincetic, Matias Alejandro

In this work, the term Entropic Grid is coined to describe a power grid with increased levels of uncertainty and dynamics. These new features will require the reconsideration of well-established paradigms in the way of planning and operating the grid and its associated markets. New tools and models able to handle uncertainty and dynamics will form the required scaffolding to properly capture the behavior of the physical system, along with the value of new technologies and policies. The leverage of this knowledge will facilitate the design of new architectures to organize power and energy systems and their associated markets. This work presents several results, tools and models with the goal of contributing to that design objective. A central idea of this thesis is that the definition of products is critical in electricity markets. When markets are constructed with appropriate product definitions in mind, the interference between the physical and the market/financial systems seen in today's markets can be reduced. A key element of evaluating market designs is understanding the impact that salient features of an entropic grid---uncertainty, dynamics, constraints---can have on the electricity markets. Dynamic electricity market models tailored to capture such features are developed in this work. Using a multi-settlement dynamic electricity market, the impact of volatility is investigated. The results show the need to implement policies and technologies able to cope with the volatility of renewable sources. Similarly, using a dynamic electricity market model in which ramping costs are considered, the impacts of those costs on electricity markets are investigated. The key conclusion is that those additional ramping costs, in average terms, are not reflected in electricity prices. These results reveal several difficulties with today's real-time markets. Elements of an alternative architecture to organize these markets are also discussed.

An intelligent case-adjustment algorithm for the automated design of population-based quality auditing protocols.

PubMed

Advani, Aneel; Jones, Neil; Shahar, Yuval; Goldstein, Mary K; Musen, Mark A

2004-01-01

We develop a method and algorithm for deciding the optimal approach to creating quality-auditing protocols for guideline-based clinical performance measures. An important element of the audit protocol design problem is deciding which guide-line elements to audit. Specifically, the problem is how and when to aggregate individual patient case-specific guideline elements into population-based quality measures. The key statistical issue involved is the trade-off between increased reliability with more general population-based quality measures versus increased validity from individually case-adjusted but more restricted measures done at a greater audit cost. Our intelligent algorithm for auditing protocol design is based on hierarchically modeling incrementally case-adjusted quality constraints. We select quality constraints to measure using an optimization criterion based on statistical generalizability coefficients. We present results of the approach from a deployed decision support system for a hypertension guideline.

Design tradeoffs for a Multispectral Linear Array (MLA) instrument

NASA Technical Reports Server (NTRS)

Mika, A. M.

1982-01-01

The heart of the multispectral linear array (MLA) design problem is to develop an instrument concept which concurrently provides a wide field-of-view with high resolution, spectral separation with precise band-to band registration, and excellent radiometric accuracy. Often, these requirements have conflicting design implications which can only be resolved by careful tradeoffs that consider performance, cost, fabrication feasibility and development risk. The key design tradeoffs for an MLA instrument are addressed, and elements of a baseline instrument concept are presented.

48 CFR 9904.417 - Cost of money as an element of the cost of capital assets under construction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... element of the cost of capital assets under construction. 9904.417 Section 9904.417 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT... of money as an element of the cost of capital assets under construction. ...

Modular System to Enable Extravehicular Activity

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.

2011-01-01

The ability to perform extravehicular activity (EVA), both human and robotic, has been identified as a key component to space missions to support such operations as assembly and maintenance of space system (e.g. construction and maintenance of the International Space Station), and unscheduled activities to repair an element of the transportation and habitation systems that can only be accessed externally and via unpressurized areas. In order to make human transportation beyond lower earth orbit (BLEO) practical, efficiencies must be incorporated into the integrated transportation systems to reduce system mass and operational complexity. Affordability is also a key aspect to be considered in space system development; this could be achieved through commonality, modularity and component reuse. Another key aspect identified for the EVA system was the ability to produce flight worthy hardware quickly to support early missions and near Earth technology demonstrations. This paper details a conceptual architecture for a modular extravehicular activity system (MEVAS) that would meet these stated needs for EVA capability that is affordable, and that could be produced relatively quickly. Operational concepts were developed to elaborate on the defined needs and define the key capabilities, operational and design constraints, and general timelines. The operational concept lead to a high level design concept for a module that interfaces with various space transportation elements and contains the hardware and systems required to support human and telerobotic EVA; the module would not be self-propelled and would rely on an interfacing element for consumable resources. The conceptual architecture was then compared to EVA Systems used in the Shuttle Orbiter, on the International Space Station to develop high level design concepts that incorporate opportunities for cost savings through hardware reuse, and quick production through the use of existing technologies and hardware designs. An upgrade option was included to make use of the developing suitport technologies.

Orbital transfer vehicle launch operations study. Volume 2: Detailed summary

NASA Technical Reports Server (NTRS)

1986-01-01

A series of Operational Design Drivers were identified. Several of these could have significant impact(s) on program costs. These recommendations, for example, include such items as: complete factory assembly and checkout prior to shipment to the ground launch site to make significant reductions in time required at the launch site as well as overall manpower required to do this work; minimize use of nonstandard equipment when orbiter provided equipment is available; and require commonality (or interchangeability) of subsystem equipment elements that are common to the space station, Orbit Maneuvering Vehicles, and/or Orbit Transfer Vehicles. Several additional items were identified that will require a significant amount of management attention (and direction) to resolve. Key elements of the space based processing plans are discussed.

Cost and Performance Report: Bioaugmentation for Aerobic Bioremediation of RDX-Contaminated Groundwater

DTIC Science & Technology

2015-09-01

Scenario 2 (15 yrs, $K) Cost Element Sub Element 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Total Cost Remedial Design Lagoon Area Anaerobic Bio ...Scenario 4 (15 yrs, $K) Cost Element Sub Element 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Total Cost Remedial Design Lagoon Area Anaerobic Bio ...in aerobic groundwater and typically forms large, dilute plumes that are difficult and costly to remediate using conventional technologies such as

Solar power satellite cost estimate

NASA Technical Reports Server (NTRS)

Harron, R. J.; Wadle, R. C.

1981-01-01

The solar power configuration costed is the 5 GW silicon solar cell reference system. The subsystems identified by work breakdown structure elements to the lowest level for which cost information was generated. This breakdown divides into five sections: the satellite, construction, transportation, the ground receiving station and maintenance. For each work breakdown structure element, a definition, design description and cost estimate were included. An effort was made to include for each element a reference that more thoroughly describes the element and the method of costing used. All costs are in 1977 dollars.

Survey of rural, private wells. Statistical design

USGS Publications Warehouse

Mehnert, Edward; Schock, Susan C.; ,

1991-01-01

Half of Illinois' 38 million acres were planted in corn and soybeans in 1988. On the 19 million acres planted in corn and soybeans, approximately 1 million tons of nitrogen fertilizer and 50 million pounds of pesticides were applied. Because groundwater is the water supply for over 90 percent of rural Illinois, the occurrence of agricultural chemicals in groundwater in Illinois is of interest to the agricultural community, the public, and regulatory agencies. The occurrence of agricultural chemicals in groundwater is well documented. However, the extent of this contamination still needs to be defined. This can be done by randomly sampling wells across a geographic area. Key elements of a random, water-well sampling program for regional groundwater quality include the overall statistical design of the program, definition of the sample population, selection of wells to be sampled, and analysis of survey results. These elements must be consistent with the purpose for conducting the program; otherwise, the program will not provide the desired information. The need to carefully design and conduct a sampling program becomes readily apparent when one considers the high cost of collecting and analyzing a sample. For a random sampling program conducted in Illinois, the key elements, as well as the limitations imposed by available information, are described.

A conceptual framework to support exposure science research ...

EPA Pesticide Factsheets

While knowledge of exposure is fundamental to assessing and mitigating risks, exposure information has been costly and difficult to generate. Driven by major scientific advances in analytical methods, biomonitoring, computational tools, and a newly articulated vision for a greater impact in public health, the field of exposure science is undergoing a rapid transition that allows it to be more agile, predictive, and data- and knowledge-driven. A necessary element of this evolved paradigm is an organizational and predictive framework for exposure science that furthers the application of systems-based approaches. To enable such systems-based approaches, we proposed the Aggregate Exposure Pathway (AEP) concept to organize data and information emerging from an invigorated and expanding field of exposure science. The AEP framework is a layered structure that describes the elements of an exposure pathway, as well as the relationship between those elements. The basic building blocks of an AEP adopt the naming conventions used for Adverse Outcome Pathways (AOPs): Key Events (KEs) to describe the measurable, obligate steps through the AEP; and Key Event Relationships (KERs) describe the linkages between KEs. Importantly, the AEP offers an intuitive approach to organize exposure information from sources to internal site of action, setting the stage for predicting stressor concentrations at an internal target site. These predicted concentrations can help inform the r

Report on the Study of Radiation Damage in Calcium Fluoride and Magnesium Fluoride Crystals for use in Excimer Laser Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

1999-10-04

A study was performed to investigate the effects of radiation damage in calcium fluoride and magnesium fluoride crystals caused by gamma rays and UV photons from excimer lasers. The purpose was to study and correlate the damage caused by these two different mechanisms in various types of material used for fabricating optical elements in high power excimer lasers and lens systems of lithography tools. These optical systems are easily damaged by the laser itself, and it is necessary to use only the most radiation resistant materials for certain key elements. It was found that a clear correlation exists between the,more » radiation induced damage caused by high energy gamma rays and that produced by UV photons from the excimer laser. This correlation allows a simple procedure to be developed to select the most radiation resistant material at the ingot level, which would be later used to fabricate various components of the optical system. This avoids incurring the additional cost of fabricating actual optical elements with material that would later be damaged under prolonged use. The result of this screening procedure can result in a considerable savings in the overall cost of the lens and laser system.« less

Blood conservation: the CEO perspective.

PubMed

Morgan, Timothy O

2004-08-01

Hospital CEOs are concerned about more than just cost of services to their patients. The advancement of patient car along with maintaining or improving patient safety are also key elements to the CEO, to limit patient risks, hospital liability, and negative public relations. The CEO is accountable to the hospital staff, the patients, and the general public. Establishing programs such as blood management or bloodless medicine can be implemented by using a team approach. A physician champion with a clear business plan that addresses all issues and challenges is critical for successful implementation. As blood and blood product costs rise and supply decreases, alternatives such as cell saving techniques and the use of pharmacologic interventions can have a significant impact on net hospital expenditures.

Class D Management Implementation Approach of the First Orbital Mission of the Earth Venture Series

NASA Technical Reports Server (NTRS)

Wells, James E.; Scherrer, John; Law, Richard; Bonniksen, Chris

2013-01-01

A key element of the National Research Council's Earth Science and Applications Decadal Survey called for the creation of the Venture Class line of low-cost research and application missions within NASA (National Aeronautics and Space Administration). One key component of the architecture chosen by NASA within the Earth Venture line is a series of self-contained stand-alone spaceflight science missions called "EV-Mission". The first mission chosen for this competitively selected, cost and schedule capped, Principal Investigator-led opportunity is the CYclone Global Navigation Satellite System (CYGNSS). As specified in the defining Announcement of Opportunity, the Principal Investigator is held responsible for successfully achieving the science objectives of the selected mission and the management approach that he/she chooses to obtain those results has a significant amount of freedom as long as it meets the intent of key NASA guidance like NPR 7120.5 and 7123. CYGNSS is classified under NPR 7120.5E guidance as a Category 3 (low priority, low cost) mission and carries a Class D risk classification (low priority, high risk) per NPR 8705.4. As defined in the NPR guidance, Class D risk classification allows for a relatively broad range of implementation strategies. The management approach that will be utilized on CYGNSS is a streamlined implementation that starts with a higher risk tolerance posture at NASA and that philosophy flows all the way down to the individual part level.

47 CFR 51.505 - Forward-looking economic cost.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

47 CFR 51.505 - Forward-looking economic cost.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

47 CFR 51.505 - Forward-looking economic cost.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

47 CFR 51.505 - Forward-looking economic cost.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

47 CFR 51.505 - Forward-looking economic cost.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Forward-looking economic cost. 51.505 Section... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.505 Forward-looking economic cost. (a) In general. The forward-looking economic cost of an element equals the sum of: (1) The total element long-run incremental...

Advanced platform technologies for Earth science

NASA Astrophysics Data System (ADS)

Lemmerman, Loren; Raymond, Carol; Shotwell, Robert; Chase, James; Bhasin, Kul; Connerton, Robert

2005-01-01

Historically, Earth science investigations have been independent and highly focused. However, the Earth's environment is a very dynamic and interrelated system and to understand it, significant improvements in spatial and temporal observations will be required. Science needs to document the need for constellations to achieve desired spatial and temporal observations. A key element envisioned for accomplishing these difficult challenges is the idea of a distributed, heterogeneous, and adaptive observing system or sensor web. This paper focuses on one possible approach based on a LEO constellation composed of 100 spacecraft. A cost analysis has been done to indicate the financial pressures of each mission phase and conclusions are drawn suggesting that new technology investments are needed, directed toward lowering production costs; that operations costs will need to be reduced through autonomy; and that, of the on-board subsystems considered, advanced power generation and management may be the most enabling of new technologies.

Laser power beaming applications and technology

NASA Astrophysics Data System (ADS)

Burke, Robert J.; Cover, Ralph A.; Curtin, Mark S.; Dinius, R.; Lampel, Michael C.

1994-05-01

Beaming laser energy to spacecraft has important economic potential. It promises significant reduction in the cost of access to space, for commercial and government missions. While the potential payoff is attractive, existing technologies perform the same missions and the keys to market penetration for power beaming are a competitive cost and a schedule consistent with customers' plans. Rocketdyne is considering these questions in the context of a commercial enterprise -- thus, evaluation of the requirements must be done based on market assessments and recognition that significant private funding will be involved. It is in the context of top level business considerations that the technology requirements are being assessed and the program being designed. These considerations result in the essential elements of the development program. Since the free electron laser is regarded as the `long pole in the tent,' this paper summarizes Rocketdyne's approach for a timely, cost-effective program to demonstrate an FEL capable of supporting an initial operating capability.

System Architecture of Explorer Class Spaceborne Telescopes: A look at Optimization of Cost, Testability, Risk and Operational Duty Cycle from the Perspective of Primary Mirror Material Selection

NASA Astrophysics Data System (ADS)

Hull, Anthony B.; Westerhoff, Thomas

2015-01-01

Management of cost and risk have become the key enabling elements for compelling science to be done within Explorer or M-Class Missions. We trace how optimal primary mirror selection may be co-optimized with orbit selection. And then trace the cost and risk implications of selecting a low diffusivity low thermal expansion material for low and medium earth orbits, vs. high diffusivity high thermal expansion materials for the same orbits. We will discuss that ZERODUR®, a material that has been in space for over 30 years, is now available as highly lightweighted open-back mirrors, and the attributes of these mirrors in spaceborne optical telescope assemblies. Lightweight ZERODUR® solutions are practical from mirrors < 0.3m in diameter to >4m in diameter. An example of a 1.2m lightweight ZERODUR® mirror will be discussed.

Low-cost conformable storage to maximize vehicle range

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, R.P.

Liquefied petroleum gas (LPG) and compressed natural gas (CNG) are currently the leading fuel contenders for converting vehicles from gasoline and diesel to alternative fuels. Two factors that inhibit conversion are additional vehicle costs and reduced range compared to gasoline. In overcoming these barriers, a key element of the alternative fuel system becomes the storage tank for these pressurized fuels. Using cylindrical pressure vessels is the conventional approach, but they do not package well in the available vehicle volume. Thiokol Corporation has developed and is now producing a conformable (non-cylindrical) aluminum storage system for LPG vans. This system increases fuelmore » storage in a given rectangular envelope. The goal of this project was to develop the technology for a lower cost conformable tank made of injection-molded plastic. Much of the cost of the aluminum conformable tank is in the fabrication because several weld seams are required. The injection-molding process has the potential to greatly reduce the fabrication costs. The requirements of a pressurized fuel tank on a vehicle necessitate the proper combination of material properties. Material selection and tank design must be optimized for maximum internal volume and minimum material use to be competitive with other technologies. The material and the design must also facilitate the injection-molding process. Prototype tanks must be fabricated to reveal molding problems, prove solutions, and measure results. In production, efficient fabrication will be key to making these tanks cost competitive. The work accomplished during this project has demonstrated that conformable LPG tanks can be molded with thermoplastics. However, to achieve a competitive tank, improvements are needed in the effective material strength. If these improvements can be made, molded plastics should produce a lower cost tank that can store more LPG on a vehicle than conventional cylinders.« less

The policy debate over public investment in comparative effectiveness research.

PubMed

Rich, Eugene C

2009-06-01

Policy makers across the political spectrum, as well as many clinicians and physician professional associations, have proposed that better information on comparative clinical effectiveness should be a key element of any solution to the US health-care cost crisis. This superficial consensus hides intense disagreements over critical issues essential to any new public effort to promote more comparative effectiveness research (CER). This article reviews the background for these disputes, summarizes the different perspectives represented by policy makers and advocates, and offers a framework to aid both practicing and academic internists in understanding the key elements of the emerging debate. Regarding the fundamental question of "what is CER," disagreements rage over whether value or cost effectiveness should be a consideration, and how specific patient perspectives should be reflected in the development and the use of such research. The question of how to pay for CER invokes controversies over the role of the market in producing such information and the private (e.g., insurers and employers) versus public responsibility for its production. The financing debate further highlights the high stakes of comparative effectiveness research, and the risks of stakeholder interests subverting any public process. Accordingly there are a range of proposals for the federal government's role in prioritization, development, and dissemination of CER. The internal medicine community, with its long history of commitment to scientific medical practice and its leadership in evidence-based medicine, should have a strong interest and play an active role in this debate.

Lockheed Martin approach to a Reusable Launch Vehicle (RLV)

NASA Astrophysics Data System (ADS)

Elvin, John D.

1996-03-01

This paper discusses Lockheed Martin's perspective on the development of a cost effective Reusable Launch Vehicle (RLV). Critical to a successful Single Stage To Orbit (SSTO) program are; an economic development plan sensitive to fiscal constraints; a vehicle concept satisfying present and future US launch needs; and an operations concept commensurate with a market driven program. Participation in the economic plan by government, industry, and the commercial sector is a key element of integrating our development plan and funding profile. The RLV baseline concept design, development evolution and several critical trade studies illustrate the superior performance achieved by our innovative approach to the problem of SSTO. Findings from initial aerodynamic and aerothermodynamic wind tunnel tests and trajectory analyses on this concept confirm the superior characteristics of the lifting body shape combined with the Linear Aerospike rocket engine. This Aero Ballistic Rocket (ABR) concept captures the essence of The Skunk Works approach to SSTO RLV technology integration and system engineering. These programmatic and concept development topics chronicle the key elements to implementing an innovative market driven next generation RLV.

Application of advanced material systems to composite frame elements

NASA Technical Reports Server (NTRS)

Llorente, Steven; Minguet, Pierre; Fay, Russell; Medwin, Steven

1992-01-01

A three phase program has been conducted to investigate DuPont's Long Discontinuous Fiber (LDF) composites. Additional tests were conducted to compare LDF composites against toughened thermosets and a baseline thermoset system. Results have shown that the LDF AS4/PEKK offers improved interlaminar (flange bending) strength with little reduction in mechanical properties due to the discontinuous nature of the fibers. In the third phase, a series of AS4/PEKK LDF C-section curved frames (representing a typical rotorcraft light frame) were designed, manufactured and tested. Specimen reconsolidation after 'stretch forming' and frame thickness were found to be key factors in this light frame's performance. A finite element model was constructed to correlate frame test results with expected strain levels determined from material property tests. Adequately reconsolidated frames performed well and failed at strain levels at or above baseline thermoset material test strains. Finally a cost study was conducted which has shown that the use of LDF for this frame would result in a significant cost savings, for moderate to large lot sizes compared with the hand lay-up of a thermoset frame.

A coherent through-wall MIMO phased array imaging radar based on time-duplexed switching

NASA Astrophysics Data System (ADS)

Chen, Qingchao; Chetty, Kevin; Brennan, Paul; Lok, Lai Bun; Ritchie, Matthiew; Woodbridge, Karl

2017-05-01

Through-the-Wall (TW) radar sensors are gaining increasing interest for security, surveillance and search and rescue applications. Additionally, the integration of Multiple-Input, Multiple-Output (MIMO) techniques with phased array radar is allowing higher performance at lower cost. In this paper we present a 4-by-4 TW MIMO phased array imaging radar operating at 2.4 GHz with 200 MHz bandwidth. To achieve high imaging resolution in a cost-effective manner, the 4 Tx and 4 Rx elements are used to synthesize a uniform linear array (ULA) of 16 virtual elements. Furthermore, the transmitter is based on a single-channel 4-element time-multiplexed switched array. In transmission, the radar utilizes frequency modulated continuous wave (FMCW) waveforms that undergo de-ramping on receive to allow digitization at relatively low sampling rates, which then simplifies the imaging process. This architecture has been designed for the short-range TW scenarios envisaged, and permits sufficient time to switch between antenna elements. The paper first outlines the system characteristics before describing the key signal processing and imaging algorithms which are based on traditional Fast Fourier Transform (FFT) processing. These techniques are implemented in LabVIEW software. Finally, we report results from an experimental campaign that investigated the imaging capabilities of the system and demonstrated the detection of personnel targets. Moreover, we show that multiple targets within a room with greater than approximately 1 meter separation can be distinguished from one another.

Potential travel cost saving in urban public-transport networks using smartphone guidance.

PubMed

Song, Cuiying; Guan, Wei; Ma, Jihui

2018-01-01

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers' preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger's choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost.

Standard cost elements for technology programs

NASA Technical Reports Server (NTRS)

Christensen, Carisa B.; Wagenfuehrer, Carl

1992-01-01

The suitable structure for an effective and accurate cost estimate for general purposes is discussed in the context of a NASA technology program. Cost elements are defined for research, management, and facility-construction portions of technology programs. Attention is given to the mechanisms for insuring the viability of spending programs, and the need for program managers is established for effecting timely fund disbursement. Formal, structures, and intuitive techniques are discussed for cost-estimate development, and cost-estimate defensibility can be improved with increased documentation. NASA policies for cash management are examined to demonstrate the importance of the ability to obligate funds and the ability to cost contracted funds. The NASA approach to consistent cost justification is set forth with a list of standard cost-element definitions. The cost elements reflect the three primary concerns of cost estimates: the identification of major assumptions, the specification of secondary analytic assumptions, and the status of program factors.

Space Shuttle Software Development and Certification

NASA Technical Reports Server (NTRS)

Orr, James K.; Henderson, Johnnie A

2000-01-01

Man-rated software, "software which is in control of systems and environments upon which human life is critically dependent," must be highly reliable. The Space Shuttle Primary Avionics Software System is an excellent example of such a software system. Lessons learn from more than 20 years of effort have identified basic elements that must be present to achieve this high degree of reliability. The elements include rigorous application of appropriate software development processes, use of trusted tools to support those processes, quantitative process management, and defect elimination and prevention. This presentation highlights methods used within the Space Shuttle project and raises questions that must be addressed to provide similar success in a cost effective manner on future long-term projects where key application development tools are COTS rather than internally developed custom application development tools

Low cost, lightweight fuel cell elements

NASA Technical Reports Server (NTRS)

Kindler, Andrew (Inventor)

2001-01-01

New fuel cell elements for use in liquid feed fuel cells are provided. The elements including biplates and endplates are low in cost, light in weight, and allow high efficiency operation. Electrically conductive elements are also a part of the fuel cell elements.

Controlling prescription drug costs: regulation and the role of interest groups in Medicare and the Veterans Health Administration.

PubMed

Frakt, Austin B; Pizer, Steven D; Hendricks, Ann M

2008-12-01

Medicare and the Veterans Health Administration (VA) both finance large outpatient prescription drug programs, though in very different ways. In the ongoing debate on how to control Medicare spending, some suggest that Medicare should negotiate directly with drug manufacturers, as the VA does. In this article we relate the role of interest groups to policy differences between Medicare and the VA and, in doing so, explain why such a large change to the Medicare drug program is unlikely. We argue that key policy differences are attributable to stable differences in interest group involvement. While this stability makes major changes in Medicare unlikely, it suggests the possibility of leveraging VA drug purchasing to achieve savings in Medicare. This could be done through a VA-administered drug-only benefit for Medicare-enrolled veterans. Such a partnership could incorporate key elements of both programs: capacity to accept large numbers of enrollees (like Medicare) and leverage to negotiate prescription drug prices (like the VA). Moreover, it could be implemented at no cost to the VA while achieving savings for Medicare and beneficiaries.

Elements of Regolith Simulant's Cost Structure

NASA Technical Reports Server (NTRS)

Rickman, Douglas L.

2009-01-01

The cost of lunar regolith simulants is much higher than many users anticipate. After all, it is nothing more than broken rock. This class will discuss the elements which make up the cost structure for simulants. It will also consider which elements can be avoided under certain circumstances and which elements might be altered by the application of additional research and development.

Designing for Maintainability and System Availability

NASA Technical Reports Server (NTRS)

Lalli, Vincent R.; Packard, Michael H.

1997-01-01

The final goal for a delivered system (whether a car, aircraft, avionics box or computer) should be its availability to operate and perform its intended function over its expected design life. Hence, in designing a system, we cannot think in terms of delivering the system and just walking away. The system supplier needs to provide support throughout the operating life of the product. Here, supportability requires an effective combination of reliability, maintainability, logistics and operations engineering (as well as safety engineering) to have a system that is available for its intended use throughout its designated mission lifetime. Maintainability is a key driving element in the effective support and upkeep of the system as well as providing the ability to modify and upgrade the system throughout its lifetime. This paper then, will concentrate on maintainability and its integration into the system engineering and design process. The topics to be covered include elements of maintainability, the total cost of ownership, how system availability, maintenance and logistics costs and spare parts cost effect the overall program costs. System analysis and maintainability will show how maintainability fits into the overall systems approach to project development. Maintainability processes and documents will focus on how maintainability is to be performed and what documents are typically generated for a large scale program. Maintainability analysis shows how trade-offs can be performed for various alternative components. The conclusions summarize the paper and are followed by specific problems for hands-on training.

Research on digital system design of nuclear power valve

NASA Astrophysics Data System (ADS)

Zhang, Xiaolong; Li, Yuan; Wang, Tao; Dai, Ye

2018-04-01

With the progress of China's nuclear power industry, nuclear power plant valve products is in a period of rapid development, high performance, low cost, short cycle of design requirements for nuclear power valve is proposed, so there is an urgent need for advanced digital design method and integrated design platform to provide technical support. Especially in the background of the nuclear power plant leakage in Japan, it is more practical to improve the design capability and product performance of the nuclear power valve. The finite element numerical analysis is a common and effective method for the development of nuclear power valves. Nuclear power valve has high safety, complexity of valve chamber and nonlinearity of seal joint surface. Therefore, it is urgent to establish accurate prediction models for earthquake prediction and seal failure to meet engineering accuracy and calculation conditions. In this paper, a general method of finite element modeling for nuclear power valve assembly and key components is presented, aiming at revealing the characteristics and rules of finite element modeling of nuclear power valves, and putting forward aprecision control strategy for finite element models for nuclear power valve characteristics analysis.

Logistics: An integral part of cost efficient space operations

NASA Technical Reports Server (NTRS)

Montgomery, Ann D.

1996-01-01

The logistics of space programs and its history within NASA are discussed, with emphasis on manned space flight and the Space Shuttle program. The lessons learned and the experience gained during these programs are reported on. Key elements of logistics are highlighted, and the problems and issues that can be expected to arise in relation to the support of long-term space operations and future space programs, are discussed. Such missions include the International Space Station program and the reusable launch vehicle. Possible solutions to the problems identified are outlined.

Chains weigh on on access. The FAH joins the throng offering proposals to solve the uninsured crisis, but some say their plan lacks a key element.

PubMed

Benko, Laura B

2007-02-26

Yet another proposal for covering the uninsured landed in the news last week, as the Federation of American Hospitals offered its plan, estimated to cost 115 dollar billion annually. While the plan drew some praise, others questioned its validity. "It's hard to take seriously a proposal that doesn't even attempt to address the fundamental issue of how all is this going to get paid for," says Susan Sherry, left.

Adverse Selection and an Individual Mandate: When Theory Meets Practice*

PubMed Central

Hackmann, Martin B.; Kolstad, Jonathan T.; Kowalski, Amanda E.

2014-01-01

We develop a model of selection that incorporates a key element of recent health reforms: an individual mandate. Using data from Massachusetts, we estimate the parameters of the model. In the individual market for health insurance, we find that premiums and average costs decreased significantly in response to the individual mandate. We find an annual welfare gain of 4.1% per person or $51.1 million annually in Massachusetts as a result of the reduction in adverse selection. We also find smaller post-reform markups. PMID:25914412

Performance and cost evaluation of health information systems using micro-costing and discrete-event simulation.

PubMed

Rejeb, Olfa; Pilet, Claire; Hamana, Sabri; Xie, Xiaolan; Durand, Thierry; Aloui, Saber; Doly, Anne; Biron, Pierre; Perrier, Lionel; Augusto, Vincent

2018-06-01

Innovation and health-care funding reforms have contributed to the deployment of Information and Communication Technology (ICT) to improve patient care. Many health-care organizations considered the application of ICT as a crucial key to enhance health-care management. The purpose of this paper is to provide a methodology to assess the organizational impact of high-level Health Information System (HIS) on patient pathway. We propose an integrated performance evaluation of HIS approach through the combination of formal modeling using the Architecture of Integrated Information Systems (ARIS) models, a micro-costing approach for cost evaluation, and a Discrete-Event Simulation (DES) approach. The methodology is applied to the consultation for cancer treatment process. Simulation scenarios are established to conclude about the impact of HIS on patient pathway. We demonstrated that although high level HIS lengthen the consultation, occupation rate of oncologists are lower and quality of service is higher (through the number of available information accessed during the consultation to formulate the diagnostic). The provided method allows also to determine the most cost-effective ICT elements to improve the care process quality while minimizing costs. The methodology is flexible enough to be applied to other health-care systems.

An assessment of monitoring requirements and costs of 'Reduced Emissions from Deforestation and Degradation'

PubMed Central

Böttcher, Hannes; Eisbrenner, Katja; Fritz, Steffen; Kindermann, Georg; Kraxner, Florian; McCallum, Ian; Obersteiner, Michael

2009-01-01

Background Negotiations on a future climate policy framework addressing Reduced Emissions from Deforestation and Degradation (REDD) are ongoing. Regardless of how such a framework will be designed, many technical solutions of estimating forest cover and forest carbon stock change exist to support policy in monitoring and accounting. These technologies typically combine remotely sensed data with ground-based inventories. In this article we assess the costs of monitoring REDD based on available technologies and requirements associated with key elements of REDD policy. Results We find that the design of a REDD policy framework (and specifically its rules) can have a significant impact on monitoring costs. Costs may vary from 0.5 to 550 US$ per square kilometre depending on the required precision of carbon stock and area change detection. Moreover, they follow economies of scale, i.e. single country or project solutions will face relatively higher monitoring costs. Conclusion Although monitoring costs are relatively small compared to other cost items within a REDD system, they should be shared not only among countries but also among sectors, because an integrated monitoring system would have multiple benefits for non-REDD management. Overcoming initialization costs and unequal access to monitoring technologies is crucial for implementation of an integrated monitoring system, and demands for international cooperation. PMID:19709413

Economic Need among Older Latinos: Applying The Elder Economic Security Standard™ Index

PubMed Central

Wallace, Steven P.; Padilla-Frausto, D. Imelda; Smith, Susan

2013-01-01

The first official U.S. federal poverty line was developed in the 1960s; since the mid-1990s the scientific consensus has been that it has become outdated and inaccurate. This article explains the key elements of the current federal measure that are inaccurate for older adults in general and older Latinos specifically. An alternative is described that addresses the key failings of the current measure. The alternative, the Elder Economic Security Standard™ Index (Elder Index), adapts a national methodology to the basic costs of living in California for 2007 using data from the American Community Survey, and other public data sources. The results show that the amount needed for basic economic security in California is higher than the federal poverty level in all counties, and averages about twice the federal level. Housing costs are the largest component of costs in most counties, although health care is the largest component for couples in lower housing cost counties. Among singles and couples age 65 and over in California, almost 60% of Latinos have incomes below the Elder Index compared to one-quarter of non-Latino whites. The rates are higher among renters, and older Latinos are more likely than non-Latino whites to rent. Applying the Elder Index in California documents the disproportionate rates of economic insecurity among older Latinos. The findings indicate that changes to public programs such as Social Security and Medicare that decrease benefits or increase costs will have disproportionately negative impact on the ability of most older Latinos to pay for basic needs. PMID:23857068

Key data elements for use in cost-utility modeling of biological treatments for rheumatoid arthritis.

PubMed

Ganz, Michael L; Hansen, Brian Bekker; Valencia, Xavier; Strandberg-Larsen, Martin

2015-05-01

Economic evaluation is becoming more common and important as new biologic therapies for rheumatoid arthritis (RA) are developed. While much has been published about how to design cost-utility models for RA to conduct these evaluations, less has been written about the sources of data populating those models. The goal is to review the literature and to provide recommendations for future data collection efforts. This study reviewed RA cost-utility models published between January 2006 and February 2014 focusing on five key sources of data (health-related quality-of-life and utility, clinical outcomes, disease progression, course of treatment, and healthcare resource use and costs). It provided recommendations for collecting the appropriate data during clinical and other studies to support modeling of biologic treatments for RA. Twenty-four publications met the selection criteria. Almost all used two steps to convert clinical outcomes data to utilities rather than more direct methods; most did not use clinical outcomes measures that captured absolute levels of disease activity and physical functioning; one-third of them, in contrast with clinical reality, assumed zero disease progression for biologic-treated patients; little more than half evaluated courses of treatment reflecting guideline-based or actual clinical care; and healthcare resource use and cost data were often incomplete. Based on these findings, it is recommended that future studies collect clinical outcomes and health-related quality-of-life data using appropriate instruments that can convert directly to utilities; collect data on actual disease progression; be designed to capture real-world courses of treatment; and collect detailed data on a wide range of healthcare resources and costs.

Elements of Regolith Simulant's Cost Structure--Why Rock Is NOT Cheap

NASA Technical Reports Server (NTRS)

Rickman, Douglas L.

2009-01-01

The cost of lunar regolith simulants is much higher than many users anticipate. After all, it is nothing more than broken rock. This class will discuss the elements which make up the cost structure for simulants. It will also consider which elements can be avoided under certain circumstances and which elements might be altered by the application of additional research and development.

Cost model relationships between textile manufacturing processes and design details for transport fuselage elements

NASA Technical Reports Server (NTRS)

Metschan, Stephen L.; Wilden, Kurtis S.; Sharpless, Garrett C.; Andelman, Rich M.

1993-01-01

Textile manufacturing processes offer potential cost and weight advantages over traditional composite materials and processes for transport fuselage elements. In the current study, design cost modeling relationships between textile processes and element design details were developed. Such relationships are expected to help future aircraft designers to make timely decisions on the effect of design details and overall configurations on textile fabrication costs. The fundamental advantage of a design cost model is to insure that the element design is cost effective for the intended process. Trade studies on the effects of processing parameters also help to optimize the manufacturing steps for a particular structural element. Two methods of analyzing design detail/process cost relationships developed for the design cost model were pursued in the current study. The first makes use of existing databases and alternative cost modeling methods (e.g. detailed estimating). The second compares design cost model predictions with data collected during the fabrication of seven foot circumferential frames for ATCAS crown test panels. The process used in this case involves 2D dry braiding and resin transfer molding of curved 'J' cross section frame members having design details characteristic of the baseline ATCAS crown design.

Encapsulation task of the low-cost silicon solar array project. Investigation of test methods, material properties, and processes for solar cell encapsulants

NASA Technical Reports Server (NTRS)

Willis, P. B.; Baum, B.; White, R. A.

1978-01-01

The results of an investigation of solar module encapsulation systems applicable to the Low-Cost Solar Array Project 1986 cost and performance goals are presented. Six basic construction elements were identified and their specific uses in module construction defined. A uniform coating basis was established for each element. The survey results were also useful in revealing price ranges for classes of materials and estimating the cost allocation for each element within the encapsulating cost goal. The six construction elements were considered to be substrates, superstrates, pottants, adhesives, outer covers and back covers.

Costs and Effects of a Telephonic Diabetes Self-Management Support Intervention Using Health Educators

PubMed Central

Schechter, Clyde B.; Walker, Elizabeth A.; Ortega, Felix M.; Chamany, Shadi; Silver, Lynn D.

2015-01-01

Background Self-management is crucial to successful glycemic control in patients with diabetes, yet it requires patients to initiate and sustain complicated behavioral changes. Support programs can improve glycemic control, but may be expensive to implement. We report here an analysis of the costs of a successful telephone-based self-management support program delivered by lay health educators utilizing a municipal health department A1c registry, and relate them to near-term effectiveness. Methods Costs of implementation were assessed by micro-costing of all resources used. Per-capita costs and cost-effectiveness ratios from the perspective of the service provider are estimated for net A1c reduction, and percentages of patients achieving A1c reductions of 0.5 and 1.0 percentage points. Oneway sensitivity analyses of key cost elements, and a Monte Carlo sensitivity analysis are reported. Results The telephone intervention was provided to 443 people at a net cost of $187.61 each. Each percentage point of net A1c reduction was achieved at a cost of $464.41. Labor costs were the largest component of costs, and cost-effectiveness was most sensitive to the wages paid to the health educators. Conclusions Effective telephone-based self-management support for people in poor diabetes control can be delivered by health educators at moderate cost relative to the gains achieved. The costs of doing so are most sensitive to the prevailing wage for the health educators. PMID:26750743

Costs and effects of a telephonic diabetes self-management support intervention using health educators.

PubMed

Schechter, Clyde B; Walker, Elizabeth A; Ortega, Felix M; Chamany, Shadi; Silver, Lynn D

2016-03-01

Self-management is crucial to successful glycemic control in patients with diabetes, yet it requires patients to initiate and sustain complicated behavioral changes. Support programs can improve glycemic control, but may be expensive to implement. We report here an analysis of the costs of a successful telephone-based self-management support program delivered by lay health educators utilizing a municipal health department A1c registry, and relate them to near-term effectiveness. Costs of implementation were assessed by micro-costing of all resources used. Per-capita costs and cost-effectiveness ratios from the perspective of the service provider are estimated for net A1c reduction, and percentages of patients achieving A1c reductions of 0.5 and 1.0 percentage points. One-way sensitivity analyses of key cost elements, and a Monte Carlo sensitivity analysis are reported. The telephone intervention was provided to 443 people at a net cost of $187.61 each. Each percentage point of net A1c reduction was achieved at a cost of $464.41. Labor costs were the largest component of costs, and cost-effectiveness was most sensitive to the wages paid to the health educators. Effective telephone-based self-management support for people in poor diabetes control can be delivered by health educators at moderate cost relative to the gains achieved. The costs of doing so are most sensitive to the prevailing wage for the health educators. Copyright © 2016 Elsevier Inc. All rights reserved.

A decision-making framework for total ownership cost management of complex systems: A Delphi study

NASA Astrophysics Data System (ADS)

King, Russel J.

This qualitative study, using a modified Delphi method, was conducted to develop a decision-making framework for the total ownership cost management of complex systems in the aerospace industry. The primary focus of total ownership cost is to look beyond the purchase price when evaluating complex system life cycle alternatives. A thorough literature review and the opinions of a group of qualified experts resulted in a compilation of total ownership cost best practices, cost drivers, key performance factors, applicable assessment methods, practitioner credentials and potential barriers to effective implementation. The expert panel provided responses to the study questions using a 5-point Likert-type scale. Data were analyzed and provided to the panel members for review and discussion with the intent to achieve group consensus. As a result of the study, the experts agreed that a total ownership cost analysis should (a) be as simple as possible using historical data; (b) establish cost targets, metrics, and penalties early in the program; (c) monitor the targets throughout the product lifecycle and revise them as applicable historical data becomes available; and (d) directly link total ownership cost elements with other success factors during program development. The resultant study framework provides the business leader with incentives and methods to develop and implement strategies for controlling and reducing total ownership cost over the entire product life cycle when balancing cost, schedule, and performance decisions.

Development of thermoplastic composite aircraft structures

NASA Technical Reports Server (NTRS)

Renieri, Michael P.; Burpo, Steven J.; Roundy, Lance M.; Todd, Stephanie A.; Kim, H. J.

1992-01-01

Efforts focused on the use of thermoplastic composite materials in the development of structural details associated with an advanced fighter fuselage section with applicability to transport design. In support of these designs, mechanics developments were conducted in two areas. First, a dissipative strain energy approach to material characterization and failure prediction, developed at the Naval Research Laboratory, was evaluated as a design/analysis tool. Second, a finite element formulation for thick composites was developed and incorporated into a lug analysis method which incorporates pin bending effects. Manufacturing concepts were developed for an upper fuel cell cover. A detailed trade study produced two promising concepts: fiber placement and single-step diaphragm forming. Based on the innovative design/manufacturing concepts for the fuselage section primary structure, elements were designed, fabricated, and structurally tested. These elements focused on key issues such as thick composite lugs and low cost forming of fastenerless, stiffener/moldine concepts. Manufacturing techniques included autoclave consolidation, single diaphragm consolidation (SDCC) and roll-forming.

KSC ground operations planning for Space Station

NASA Technical Reports Server (NTRS)

Lyon, J. R.; Revesz, W., Jr.

1993-01-01

At the Kennedy Space Center (KSC) in Florida, processing facilities are being built and activated to support the processing, checkout, and launch of Space Station elements. The generic capability of these facilities will be utilized to support resupply missions for payloads, life support services, and propellants for the 30-year life of the program. Special Ground Support Equipment (GSE) is being designed for Space Station hardware special handling requirements, and a Test, Checkout, and Monitoring System (TCMS) is under development to verify that the flight elements are ready for launch. The facilities and equipment used at KSC, along with the testing required to accomplish the mission, are described in detail to provide an understanding of the complexity of operations at the launch site. Assessments of hardware processing flows through KSC are being conducted to minimize the processing flow times for each hardware element. Baseline operations plans and the changes made to improve operations and reduce costs are described, recognizing that efficient ground operations are a major key to success of the Space Station.

Aptamers as the Agent in Decontamination Assays (Apta-Decontamination Assays): From the Environment to the Potential Application In Vivo

PubMed Central

Bilibana, Mawethu Pascoe; Yeoh, Tzi Shien; Tang, Thean-Hock

2017-01-01

The binding specificity and affinity of aptamers have long been harnessed as the key elements in the development of aptamer-based assays, particularly aptasensing application. One promising avenue that is currently explored based on the specificity and affinity of aptamers is the application of aptamers in the decontamination assays. Aptamers have been successfully harnessed as the decontamination agents to remove contaminants from the environment and to decontaminate infectious elements. The reversible denaturation property inherent in aptamers enables the repeated usage of aptamers, which can immensely save the cost of decontamination. Analogous to the point-of-care diagnostics, there is no doubt that aptamers can also be deployed in the point-of-care aptamer-based decontamination assay, whereby decontamination can be performed anywhere and anytime for instantaneous decision-making. It is also prophesied that aptamers can also serve more than as a decontaminant, probably as a tool to capture and kill hazardous elements, particularly pathogenic agents. PMID:29225967

Resilience theory incorporated into urban wastewater systems management. State of the art.

PubMed

Juan-García, P; Butler, D; Comas, J; Darch, G; Sweetapple, C; Thornton, A; Corominas, Ll

2017-05-15

Government bodies, utilities, practitioners, and researchers have growing interest in the incorporation of resilience into wastewater management. Since resilience is a multidisciplinary term, it is important to review what has been achieved in the wastewater sector, and describe the future research directions for the forthcoming years. This work presents a critical review of studies that deal with resilience in the wastewater treatment sector, with a special focus on understanding how they addressed the key elements for assessing resilience, such as stressors, system properties, metrics and interventions to increase resilience. The results showed that only 17 peer-reviewed papers and 6 relevant reports, a small subset of the work in wastewater research, directly addressed resilience. The lack of consensus in the definition of resilience, and the elements of a resilience assessment, is hindering the implementation of resilience in wastewater management. To date, no framework for resilience assessment is complete, comprehensive or directly applicable to practitioners; current examples are lacking key elements (e.g. a comprehensive study of stressors, properties and metrics, examples of cases study, ability to benchmark interventions or connectivity with broader frameworks). Furthermore, resilience is seen as an additional cost or extra effort, instead of a means to overcome project uncertainty that could unlock new opportunities for investment. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

PRA and Conceptual Design

NASA Technical Reports Server (NTRS)

DeMott, Diana; Fuqua, Bryan; Wilson, Paul

2013-01-01

Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

Extraterrestrial processing and manufacturing of large space systems, volume 2, chapters 7-14 and appendices

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.

Optimal nonimaging integrated evacuated solar collector

NASA Astrophysics Data System (ADS)

Garrison, John D.; Duff, W. S.; O'Gallagher, Joseph J.; Winston, Roland

1993-11-01

A non imaging integrated evacuated solar collector for solar thermal energy collection is discussed which has the lower portion of the tubular glass vacuum enveloped shaped and inside surface mirrored to optimally concentrate sunlight onto an absorber tube in the vacuum. This design uses vacuum to eliminate heat loss from the absorber surface by conduction and convection of air, soda lime glass for the vacuum envelope material to lower cost, optimal non imaging concentration integrated with the glass vacuum envelope to lower cost and improve solar energy collection, and a selective absorber for the absorbing surface which has high absorptance and low emittance to lower heat loss by radiation and improve energy collection efficiency. This leads to a very low heat loss collector with high optical collection efficiency, which can operate at temperatures up to the order of 250 degree(s)C with good efficiency while being lower in cost than current evacuated solar collectors. Cost estimates are presented which indicate a cost for this solar collector system which can be competitive with the cost of fossil fuel heat energy sources when the collector system is produced in sufficient volume. Non imaging concentration, which reduces cost while improving performance, and which allows efficient solar energy collection without tracking the sun, is a key element in this solar collector design.

Consumer perspectives on assistive technology outcomes.

PubMed

Lenker, James A; Harris, Frances; Taugher, Mary; Smith, Roger O

2013-09-01

The current study explored domains of assistive technology (AT) device outcomes that are most valued by AT users. A secondary objective was to identify elements in the device acquisition process that affect outcomes. Focus groups were conducted at geographically dispersed locations within the USA. The groups were moderated by experienced AT practitioners who followed a detailed procedure emphasizing a nominal group facilitation technique. Twenty-four adult AT users, representing a range of ages and disability populations, participated in four focus groups. Many had over 15 years of experience with multiple device types. Qualitative analysis yielded 13 threads that embodied salient outcome domains (e.g. independence, subjective well-being, participation in work and school, cost-effectiveness) and key factors associated with the device acquisition process (e.g. lengthy periods of frustration, variable quality of service providers). Ironically, these data were evoked only after the term "outcomes" was omitted from focus group questions. AT outcomes studies are needed that report data regarding (a) the impact of AT on participation, (b) costs of AT provision and (c) key elements in the AT service delivery process. Future studies will be further strengthened to the extent that their methodologies actively assimilate consumer perspectives. Implications for Rehabilitation Consumers highly value the impact of AT devices on their independence, subjective well-being and participation in work and school. The process of acquiring assistive technology devices is often lengthy and frustrating for consumers. Future AT outcomes research should report descriptive data regarding service delivery processes, as well as long-term impacts for consumers. Practitioners and researchers should avoid the use of potentially confusing professional jargon when administering surveys to consumers.

A Pragmatic Path to Investigating Europa's Habitability

NASA Technical Reports Server (NTRS)

Pappalardo; Bengenal; Bar; Bills; Blankenship; Connerney; Kurth; McGrath; Moore; Prockter;

Dynamic video encryption algorithm for H.264/AVC based on a spatiotemporal chaos system.

PubMed

Xu, Hui; Tong, Xiao-Jun; Zhang, Miao; Wang, Zhu; Li, Ling-Hao

2016-06-01

Video encryption schemes mostly employ the selective encryption method to encrypt parts of important and sensitive video information, aiming to ensure the real-time performance and encryption efficiency. The classic block cipher is not applicable to video encryption due to the high computational overhead. In this paper, we propose the encryption selection control module to encrypt video syntax elements dynamically which is controlled by the chaotic pseudorandom sequence. A novel spatiotemporal chaos system and binarization method is used to generate a key stream for encrypting the chosen syntax elements. The proposed scheme enhances the resistance against attacks through the dynamic encryption process and high-security stream cipher. Experimental results show that the proposed method exhibits high security and high efficiency with little effect on the compression ratio and time cost.

Modular System to Enable Extravehicular Activity

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.

2012-01-01

The ability to perform extravehicular activity (EVA), both human and robotic, has been identified as a key component to space missions to support such operations as assembly and maintenance of space systems (e.g. construction and maintenance of the International Space Station), and unscheduled activities to repair an element of the transportation and habitation systems that can only be accessed externally and via unpressurized areas. In order to make human transportation beyond lower Earth orbit (LEO) practical, efficiencies must be incorporated into the integrated transportation systems to reduce system mass and operational complexity. Affordability is also a key aspect to be considered in space system development; this could be achieved through commonality, modularity and component reuse. Another key aspect identified for the EVA system was the ability to produce flight worthy hardware quickly to support early missions and near Earth technology demonstrations. This paper details a conceptual architecture for a modular EVA system that would meet these stated needs for EVA capability that is affordable, and that could be produced relatively quickly. Operational concepts were developed to elaborate on the defined needs, and to define the key capabilities, operational and design constraints, and general timelines. The operational concept lead to a high level design concept for a module that interfaces with various space transportation elements and contains the hardware and systems required to support human and telerobotic EVA; the module would not be self-propelled and would rely on an interfacing element for consumable resources. The conceptual architecture was then compared to EVA Systems used in the Space Shuttle Orbiter, on the International Space Station to develop high level design concepts that incorporate opportunities for cost savings through hardware reuse, and quick production through the use of existing technologies and hardware designs. An upgrade option was included to make use of the developing suit port technologies.

A qualitative study of tobacco interventions for LGBTQ+ youth and young adults: overarching themes and key learnings.

PubMed

Bruce Baskerville, N; Wong, Katy; Shuh, Alanna; Abramowicz, Aneta; Dash, Darly; Esmail, Aamer; Kennedy, Ryan

2018-01-18

Smoking prevalence is very high among lesbian, gay, bisexual, transgendered and queer (LGBTQ+) youth and young adults (YYA) compared to non-LGBTQ+ YYA. A knowledge gap exists on culturally appropriate and effective prevention and cessation efforts for members of this diverse community, as limited interventions have been developed with and for this population, and there are very few studies determining the impact of these interventions. This study identifies the most salient elements of LGBTQ+ cessation and prevention interventions from the perspective of LGBTQ+ YYA. Three descriptions of interventions tailored for LGBTQ+ YYA (group cessation counselling, social marketing, and a mobile phone app with social media incorporated), were shared with LGBTQ+ YYA via 24 focus groups with 204 participants in Toronto and Ottawa, Canada. Open-ended questions focused on their feelings, likes and dislikes, and concerns about the culturally modified intervention descriptions. Framework analysis was used to identify overarching themes across all three intervention descriptions. The data revealed eight overarching themes across all three intervention descriptions. Smoking cessation and prevention interventions should have the following key attributes: 1) be LGBTQ+ - specific; 2) be accessible in terms of location, time, availability, and cost; 3) be inclusive, relatable, and highlight diversity; 4) incorporate LGBTQ+ peer support and counselling services; 5) integrate other activities beyond smoking; 6) be positive, motivational, uplifting, and empowering; 7) provide concrete coping mechanisms; and 8) integrate rewards and incentives. LGBTQ+ YYA focus group participants expressed a desire for an intervention that can incorporate these key elements. The mobile phone app and social media campaign were noted as potential interventions that could include all the essential elements.

Key Elements of a Good Mathematics Lesson as Seen by Japanese Junior High School Teachers

ERIC Educational Resources Information Center

Ebaeguin, Marlon; Stephens, Max

2016-01-01

This study makes a comparison between what literature on Japanese Lesson Study suggests are key elements of a good mathematics lesson and what junior high school mathematics teachers in Japan value in planning their lessons. The teachers' strong consensus in their endorsements of these key elements explains why Japanese teachers strongly support…

Low cost booster and high performance orbit injection propulsion extended abstract

NASA Technical Reports Server (NTRS)

Sackheim, R. L.

1994-01-01

Space transportation is currently a major element of cost for communications satellite systems. For every dollar spent in manufacturing the satellite, somewhere between 1 and 3 dollars must be spent to launch the satellite into its initial operational orbit. This also makes the weight of the satellite a very critical cost factor because it is important to maximize the useful payload that is placed into orbit to maximize the return on the original investment. It seems apparent then, that tremendous economic advantage for satellite communications systems can be gained from improvements in two key highly leveraged propulsion areas. The first and most important economic improvement can be achieved by significantly lowering the cost of today's launch vehicles. The second gain that would greatly benefit the communications satellite business position is to increase both the useful (payload) weight placed into the orbit and the revenue generating lifetime of the satellite on-orbit. The point of this paper is to first explain that these two goals can best be achieved by cost reduction and performance increasing advancements in rocket propulsion for both the launch vehicle and for the satellite on-board apogee insertion and on-orbit velocity control systems.

A low cost, high performance, 1.2m off-axis telescope built with NG-Xinetics silicon carbide

NASA Astrophysics Data System (ADS)

Rey, Justin J.; Wellman, John A.; Egan, Richard G.; Wollensak, Richard J.

2011-09-01

The search for extrasolar habitable planets is one of three major astrophysics priorities identified for the next decade. These missions demand very high performance visible-wavelength optical imaging systems. Such high performance space telescopes are typically extremely expensive and can be difficult for government agencies to afford in today's economic climate, and most lower cost systems offer little benefit because they fall short on at least one of the following three key performance parameters: imaging wavelength, total system-level wavefront error and aperture diameter. Northrop Grumman Xinetics has developed a simple, lightweight, low-cost telescope design that will address the near-term science objectives of this astrophysics theme with the required optical performance, while reducing the telescope cost by an order of magnitude. Breakthroughs in SiC mirror manufacturing, integrated wavefront sensing, and high TRL deformable mirror technology have finally been combined within the same organization to offer a complete end-to-end telescope system in the lower end of the Class D cost range. This paper presents the latest results of real OAP polishing and metrology data, an optimized optical design, and finite element derived WFE

ParkinsonNet: A Low-Cost Health Care Innovation With A Systems Approach From The Netherlands.

PubMed

Bloem, Bas R; Rompen, Lonneke; Vries, Nienke M de; Klink, Ab; Munneke, Marten; Jeurissen, Patrick

2017-11-01

ParkinsonNet, a low-cost innovation to optimize care for patients with Parkinson disease, was developed in 2004 as a network of physical therapists in several regions in the Netherlands. Since that time, the network has achieved full national reach, with 70 regional networks and around 3,000 specifically trained professionals from 12 disciplines. Key elements include the empowerment of professionals who are highly trained and specialized in Parkinson disease, the empowerment of patients by education and consultation, and the empowerment of integrated multidisciplinary teams to better address and manage the disease. Studies have found that the ParkinsonNet approach leads to outcomes that are at least as good as, if not better than, outcomes from usual care. One study found a 50 percent reduction in hip fractures and fewer inpatient admissions. Other studies suggest that ParkinsonNet leads to modest but important cost savings (at least US$439 per patient annually). These cost savings outweigh the costs of building and maintaining the network. Because of ParkinsonNet's success, the program has now spread to several other countries and serves as a model of a successful and scalable frugal innovation.

Valuation of social and health effects of transport-related air pollution in Madrid (Spain).

PubMed

Monzón, Andrés; Guerrero, María-José

2004-12-01

Social impacts of pollutants from mobile sources are a key element in urban design and traffic planning. One of the most relevant impacts is health effects associated with high pollution periods. Madrid is a city that suffers chronic congestion levels and some periods of very stable atmospheric conditions; as a result, pollution levels exceed air quality standards for certain pollutants. This paper focuses on the social evaluation of transport-related emissions. A new methodology to evaluate those impacts in monetary terms has been designed and applied to Madrid. The method takes into account costs associated with losses in working time, mortality and human suffering; calculated using an impact pathway approach linked to CORINAIR emissions. This also allows the calculation of social costs associated with greenhouse gas impacts. As costs have been calculated individually by effect and mode of transport, they can be used to design pricing policies based on real social costs. This paper concludes that the health and social costs of transport-related air pollution in Madrid is 357 Meuro. In these circumstances, the recent public health tax applied in Madrid is clearly correct and sensible with a fair pricing policy on car use.

Virtual experiments, physical validation: dental morphology at the intersection of experiment and theory

PubMed Central

Anderson, P. S. L.; Rayfield, E. J.

2012-01-01

Computational models such as finite-element analysis offer biologists a means of exploring the structural mechanics of biological systems that cannot be directly observed. Validated against experimental data, a model can be manipulated to perform virtual experiments, testing variables that are hard to control in physical experiments. The relationship between tooth form and the ability to break down prey is key to understanding the evolution of dentition. Recent experimental work has quantified how tooth shape promotes fracture in biological materials. We present a validated finite-element model derived from physical compression experiments. The model shows close agreement with strain patterns observed in photoelastic test materials and reaction forces measured during these experiments. We use the model to measure strain energy within the test material when different tooth shapes are used. Results show that notched blades deform materials for less strain energy cost than straight blades, giving insights into the energetic relationship between tooth form and prey materials. We identify a hypothetical ‘optimal’ blade angle that minimizes strain energy costs and test alternative prey materials via virtual experiments. Using experimental data and computational models offers an integrative approach to understand the mechanics of tooth morphology. PMID:22399789

Biosensor technology: technology push versus market pull.

PubMed

Luong, John H T; Male, Keith B; Glennon, Jeremy D

2008-01-01

Biosensor technology is based on a specific biological recognition element in combination with a transducer for signal processing. Since its inception, biosensors have been expected to play a significant analytical role in medicine, agriculture, food safety, homeland security, environmental and industrial monitoring. However, the commercialization of biosensor technology has significantly lagged behind the research output as reflected by a plethora of publications and patenting activities. The rationale behind the slow and limited technology transfer could be attributed to cost considerations and some key technical barriers. Analytical chemistry has changed considerably, driven by automation, miniaturization, and system integration with high throughput for multiple tasks. Such requirements pose a great challenge in biosensor technology which is often designed to detect one single or a few target analytes. Successful biosensors must be versatile to support interchangeable biorecognition elements, and in addition miniaturization must be feasible to allow automation for parallel sensing with ease of operation at a competitive cost. A significant upfront investment in research and development is a prerequisite in the commercialization of biosensors. The progress in such endeavors is incremental with limited success, thus, the market entry for a new venture is very difficult unless a niche product can be developed with a considerable market volume.

Measuring NO, NO2, CO2 and O3 with low-cost sensors

NASA Astrophysics Data System (ADS)

Müller, Michael; Graf, Peter; Hüglin, Christoph

2017-04-01

Inexpensive sensors measuring ambient gas concentrations can be integrated in sensor units forming dense sensor networks. The utilized sensors have to be sufficiently accurate as the value of such networks directly depends on the information they provide. Thus, thorough testing of sensors before bringing them into service and the application of effective strategies for performance monitoring and adjustments during service are key elements for operating the low-cost sensors that are currently available on the market. We integrated several types of low-cost sensors into sensor units (Alphasense NO2 B4/B42F/B43F, Alphasense NO B4, SensAir CO2 LP8, Aeroqual O3 SM50), run them in the field next to instruments of air quality monitoring stations and performed tests in the laboratory. The poster summarizes our findings regarding the achieved sensor accuracy, methods to improve sensor performance as well as strategies to monitor the current state of the sensor (drifts, sensitivity) within a sensor network.

47 CFR 51.511 - Forward-looking economic cost per unit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Forward-looking economic cost per unit. 51.511... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.511 Forward-looking economic cost per unit. (a) The forward-looking economic cost per unit of an element equals the forward-looking economic cost of the...

47 CFR 51.511 - Forward-looking economic cost per unit.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Forward-looking economic cost per unit. 51.511... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.511 Forward-looking economic cost per unit. (a) The forward-looking economic cost per unit of an element equals the forward-looking economic cost of the...

47 CFR 51.511 - Forward-looking economic cost per unit.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Forward-looking economic cost per unit. 51.511... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.511 Forward-looking economic cost per unit. (a) The forward-looking economic cost per unit of an element equals the forward-looking economic cost of the...

47 CFR 51.511 - Forward-looking economic cost per unit.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Forward-looking economic cost per unit. 51.511... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.511 Forward-looking economic cost per unit. (a) The forward-looking economic cost per unit of an element equals the forward-looking economic cost of the...

47 CFR 51.511 - Forward-looking economic cost per unit.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Forward-looking economic cost per unit. 51.511... (CONTINUED) INTERCONNECTION Pricing of Elements § 51.511 Forward-looking economic cost per unit. (a) The forward-looking economic cost per unit of an element equals the forward-looking economic cost of the...

Method and apparatus for staking optical elements

DOEpatents

Woods, Robert O.

1988-01-01

A method and apparatus for staking two optical elements together in order to retain their alignment is disclosed. The apparatus includes a removable adaptor made up of first and second adaptor bodies each having a lateral slot in their front and side faces. The adaptor also includes a system for releasably attaching each adaptor body to a respective optical element such that when the two optical elements are positioned relative to one another the adaptor bodies are adjacent and the lateral slots therein are aligned to form key slots. The adaptor includes keys which are adapted to fit into the key slots. A curable filler material is employed to retain the keys in the key slots and thereby join the first and second adaptor bodies to form the adaptor. Also disclosed is a method for staking together two optical elements employing the adaptor of the present invention.

Method and apparatus for staking optical elements

DOEpatents

Woods, Robert O.

1988-10-04

A method and apparatus for staking two optical elements together in order to retain their alignment is disclosed. The apparatus includes a removable adaptor made up of first and second adaptor bodies each having a lateral slot in their front and side faces. The adaptor also includes a system for releasably attaching each adaptor body to a respective optical element such that when the two optical elements are positioned relative to one another the adaptor bodies are adjacent and the lateral slots therein are aligned to form key slots. The adaptor includes keys which are adapted to fit into the key slots. A curable filler material is employed to retain the keys in the key slots and thereby join the first and second adaptor bodies to form the adaptor. Also disclosed is a method for staking together two optical elements employing the adaptor of the present invention.

Aluminum automotive space frames

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

Design of aluminum structures is to a new topic. Aircraft makers have successfully solved difficult structural problems with a high degree of understanding and reliability. Other transportation modes such as trucks, trailers, and railcars have faced structural problems with some emphasis on high- and low-cycle fatigue of welded aluminum structures. However, the automotive market places stringent engineering demands on materials and superimposes demanding cost constraints. A project was instituted at Reynolds Metals Co. to investigate the opportunities for the cost-effective application of aluminum to automotive spaceframes. Several areas were recognized as key to the success of this application. They were:more » equivalent or superior structural stiffness of the assembly to existing steel unibody and/or steel spaceframe vehicles; effective joining of spaceframe members; equivalent or superior crashworthiness of the assembly; weight savings; flexibility; and low-cost approach aimed at effective manufacturing. To gain experience with the key aspects in a practical environment, the experience of current builders of steel tube frame chassis was explored. These chassis are typically used in low-volume vehicles requiring torsional stiffness, excellent crashworthiness, and exterior body-style flexibility. A model was developed using finite element methods that accurately predicts mass and stiffness of frames. An effective aluminum space frame was generated which was 7.5% stiffer and more than 20% lighter than the steel frame, with stresses kept below the fatigue limit for aluminum welds.« less

Optical systems for point-of-care diagnostic instrumentation: analysis of imaging performance and cost.

PubMed

Pierce, Mark C; Weigum, Shannon E; Jaslove, Jacob M; Richards-Kortum, Rebecca; Tkaczyk, Tomasz S

2014-01-01

One of the key elements in point-of-care (POC) diagnostic test instrumentation is the optical system required for signal detection and/or imaging. Many tests which use fluorescence, absorbance, or colorimetric optical signals are under development for management of infectious diseases in resource limited settings, where the overall size and cost of the device is of critical importance. At present, high-performance lenses are expensive to fabricate and difficult to obtain commercially, presenting barriers for developers of in vitro POC tests or microscopic image-based diagnostics. We recently described a compact "hybrid" objective lens incorporating both glass and plastic optical elements, with a numerical aperture of 1.0 and field-of-view of 250 μm. This design concept may potentially enable mass-production of high-performance, low-cost optical systems which can be easily incorporated in the readout path of existing and emerging POC diagnostic assays. In this paper, we evaluate the biological imaging performance of these lens systems in three broad POC diagnostic application areas; (1) bright field microscopy of histopathology slides, (2) cytologic examination of blood smears, and (3) immunofluorescence imaging. We also break down the fabrication costs and draw comparisons with other miniature optical systems. The hybrid lenses provided images with quality comparable to conventional microscopy, enabling examination of neoplastic pathology and infectious parasites including malaria and cryptosporidium. We describe how these components can be produced at below $10 per unit in full-scale production quantities, making these systems well suited for use within POC diagnostic instrumentation.

Do IDSs really benefit from affiliating with managed care plans?

PubMed

Hogan, K; Thomopoulos, M

1998-02-01

Integrated delivery systems (IDSs) affiliate with HMOs primarily to gain access to patients enrolled in managed care plans. Outright ownership of an HMO offers an IDS additional advantages, including opportunities to create a more seamless care process, improve patient outcomes, draw on the HMOs' experience in reducing costs, and administer health management and delivery at a significantly lower cost than the industry standard. The current trend toward IDS ownership of HMOs suggests that the line between providers and payers is blurring. Some states have encouraged this trend by enacting legislation that allows IDSs to act as insurers. Recent data indicate that IDSs with HMO components tend to be more vertically integrated than those without such components. These data suggest that close alignment with an HMO may be a key element in the effort to achieve vertical integration.

A systematic review of cost-sharing strategies used within publicly-funded drug plans in member countries of the organisation for economic co-operation and development.

PubMed

Barnieh, Lianne; Clement, Fiona; Harris, Anthony; Blom, Marja; Donaldson, Cam; Klarenbach, Scott; Husereau, Don; Lorenzetti, Diane; Manns, Braden

2014-01-01

Publicly-funded drug plans vary in strategies used and policies employed to reduce continually increasing pharmaceutical expenditures. We systematically reviewed the utilization of cost-sharing strategies and physician-directed prescribing regulations in publicly-funded formularies within member nations of the Organization of Economic Cooperation and Development (OECD). Using the OECD nations as the sampling frame, a search for cost-sharing strategies and physician-directed prescribing regulations was done using published and grey literature. Collected data was verified by a system expert within the prescription drug insurance plan in each country, to ensure the accuracy of key data elements across plans. Significant variation in the use of cost-sharing mechanisms was seen. Copayments were the most commonly used cost-containment measure, though their use and amount varied for those with certain conditions, most often chronic diseases (in 17 countries), and by socio-economic status (either income or employment status), or with age (in 15 countries). Caps and deductibles were only used by five systems. Drug cost-containment strategies targeting physicians were also identified in 24 countries, including guideline-based prescribing, prescription monitoring and incentive structures. There was variable use of cost-containment strategies to limit pharmaceutical expenditures in publicly funded formularies within OECD countries. Further research is needed to determine the best approach to constrain costs while maintaining access to pharmaceutical drugs.

The Geographic Concentration of Enterprise in Developing Countries

PubMed Central

Felkner, John S.; Townsend, Robert M.

2011-01-01

A nation’s economic geography can have an enormous impact on its development. In Thailand, we show that a high concentration of enterprise in an area predicts high subsequent growth in and around that area. We also find spatially contiguous convergence of enterprise with stagnant areas left behind. Exogenous physiographic conditions are correlated with enterprise location and growth. We fit a structural, micro-founded model of occupation transitions with fine-tuned geographic capabilities to village data and replicate these salient facts. Key elements of the model include costs, credit constraints on occupation choice, and spatially varying expansion of financial service providers. PMID:22844158

Advanced Millimeter-Wave Imaging Enhances Security Screening

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheen, David M.; Bernacki, Bruce E.; McMakin, Douglas L.

2012-01-12

Millimeter-wave imaging is rapidly gaining acceptance for passenger screening at airports and other secured facilities. This paper details a number of techniques developed over the last several years including novel image reconstruction and display techniques, polarimetric imaging techniques, array switching schemes, as well as high frequency high bandwidth techniques. Implementation of some of these methods will increase the cost and complexity of the mm-wave security portal imaging systems. RF photonic methods may provide new solutions to the design and development of the sequentially switched linear mm-wave arrays that are the key element in the mm-wave portal imaging systems.

Advanced Millimeter-Wave Security Portal Imaging Techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheen, David M.; Bernacki, Bruce E.; McMakin, Douglas L.

2012-04-01

Millimeter-wave imaging is rapidly gaining acceptance for passenger screening at airports and other secured facilities. This paper details a number of techniques developed over the last several years including novel image reconstruction and display techniques, polarimetric imaging techniques, array switching schemes, as well as high frequency high bandwidth techniques. Implementation of some of these methods will increase the cost and complexity of the mm-wave security portal imaging systems. RF photonic methods may provide new solutions to the design and development of the sequentially switched linear mm-wave arrays that are the key element in the mm-wave portal imaging systems.

Low-cost Active Structural Control Space Experiment (LASC)

NASA Technical Reports Server (NTRS)

Robinett, Rush; Bukley, Angelia P.

1992-01-01

The DOE Lab Director's Conference identified the need for the DOE National Laboratories to actively and aggressively pursue ways to apply DOE technology to problems of national need. Space structures are key elements of DOD and NASA space systems and a space technology area in which DOE can have a significant impact. LASC is a joint agency space technology experiment (DOD Phillips, NASA Marshall, and DOE Sandia). The topics are presented in viewgraph form and include the following: phase 4 investigator testbed; control of large flexible structures in orbit; INFLEX; Controls, Astrophysics; and structures experiments in space; SARSAT; and LASC mission objectives.

Toxicologic pathology in a multicultural world--India.

PubMed

Schultze, A Eric; Reddy, Vijayapal R; Donnelly, Kevin B; Berridge, Brian R

2011-10-01

The global practice of drug development is expanding into many different continents and countries. India, in particular, is rapidly emerging as an economic force in this arena by offering ever-expanding opportunities for pharmaceutical market expansion as well as productive drug development partnerships. The key to the country's current socioeconomic success appears to be education, particularly the development of higher and professional education. Also, recent modifications to India's patent laws offer greater protections and incentives for international investment. Increasing numbers of competent contract research organizations create attractive opportunities for large Western pharmaceutical companies with a desire to gain access to burgeoning markets as well as mitigate the rising cost of drug development with less costly services. Well-trained veterinary pathologists are available, appropriate facilities are being constructed, and laboratory capabilities are expanding. Developing a productive partnership with a credible laboratory service in India, as with any new provider, requires due diligence and knowledgeable scrutiny of key elements of the work stream, such as facilities, education and training of laboratory personnel, Good Laboratory Practices, animal care, timelines, and data management. Ultimately and with appropriate management, mutually beneficial drug development partnerships are available in India.

Significant factors of aviation insurance and risk management strategy: an empirical study of Taiwanese airline carriers.

PubMed

Lin, Yi Hsin; Chang, Yu Hern

2008-04-01

Aviation insurance premiums have become a heavy burden for the airline industry since September 11, 2001. Although the industry must constantly balance its operations between profitability and safety, the reality is that airlines are in the business of making money. Therefore, their ability to reduce cost and manage risk is a key factor for success. Unlike past research, which used subjective judgment methods, this study applied quantitative historical data (1999-2000) and gray relation analysis to identify the primary factors influencing ratemaking for aviation insurance premiums. An empirical study of six airlines in Taiwan was conducted to determine these factors and to analyze the management strategies used to deal with them. Results showed that the loss experience and performance of individual airlines were the key elements associated with aviation insurance premiums paid by each airline. By identifying and understanding the primary factors influencing ratemaking for aviation insurance, airlines will better understand their relative operational strengths and weaknesses, and further help top management identify areas for further improvement. Knowledge of these factors combined with effective risk management strategies, may result in lower premiums and operating costs for airline companies.

Nuclear Systems Kilopower Overview

NASA Technical Reports Server (NTRS)

Palac, Don; Gibson, Marc; Mason, Lee; Houts, Michael; McClure, Patrick; Robinson, Ross

2016-01-01

The Nuclear Systems Kilopower Project was initiated by NASAs Space Technology Mission Directorate Game Changing Development Program in fiscal year 2015 to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (Technology Readiness Level 5) for space science and human exploration power needs. The Nuclear Systems Kilopower Project consists of two elements. The primary element is the Kilopower Prototype Test, also called the Kilopower Reactor Using Stirling Technology(KRUSTY) Test. This element consists of the development and testing of a fission ground technology demonstrator of a 1 kWe fission power system. A 1 kWe system matches requirements for some robotic precursor exploration systems and future potential deep space science missions, and also allows a nuclear ground technology demonstration in existing nuclear test facilities at low cost. The second element, the Mars Kilopower Scalability Study, consists of the analysis and design of a scaled-up version of the 1 kWe reference concept to 10 kWe for Mars surface power projected requirements, and validation of the applicability of the KRUSTY experiment to key technology challenges for a 10 kWe system. If successful, these two elements will lead to initiation of planning for a technology demonstration of a 10 kWe fission power capability for Mars surface outpost power.

28 CFR 100.17 - Request for payment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... adequate analysis and evaluation of the incurred costs. The FBI reserves the right to request additional... submit to the FBI incurred costs by line item with supporting information. (2) A cost element breakdown... provided to the FBI for the following categories of cost elements, as applicable: (1) Materials. Provide a...

28 CFR 100.17 - Request for payment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... adequate analysis and evaluation of the incurred costs. The FBI reserves the right to request additional... submit to the FBI incurred costs by line item with supporting information. (2) A cost element breakdown... provided to the FBI for the following categories of cost elements, as applicable: (1) Materials. Provide a...

28 CFR 100.17 - Request for payment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... adequate analysis and evaluation of the incurred costs. The FBI reserves the right to request additional... submit to the FBI incurred costs by line item with supporting information. (2) A cost element breakdown... provided to the FBI for the following categories of cost elements, as applicable: (1) Materials. Provide a...

28 CFR 100.17 - Request for payment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... adequate analysis and evaluation of the incurred costs. The FBI reserves the right to request additional... submit to the FBI incurred costs by line item with supporting information. (2) A cost element breakdown... provided to the FBI for the following categories of cost elements, as applicable: (1) Materials. Provide a...

28 CFR 100.17 - Request for payment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... adequate analysis and evaluation of the incurred costs. The FBI reserves the right to request additional... submit to the FBI incurred costs by line item with supporting information. (2) A cost element breakdown... provided to the FBI for the following categories of cost elements, as applicable: (1) Materials. Provide a...

Wafer-scale micro-optics fabrication

NASA Astrophysics Data System (ADS)

Voelkel, Reinhard

2012-07-01

Micro-optics is an indispensable key enabling technology for many products and applications today. Probably the most prestigious examples are the diffractive light shaping elements used in high-end DUV lithography steppers. Highly-efficient refractive and diffractive micro-optical elements are used for precise beam and pupil shaping. Micro-optics had a major impact on the reduction of aberrations and diffraction effects in projection lithography, allowing a resolution enhancement from 250 nm to 45 nm within the past decade. Micro-optics also plays a decisive role in medical devices (endoscopes, ophthalmology), in all laser-based devices and fiber communication networks, bringing high-speed internet to our homes. Even our modern smart phones contain a variety of micro-optical elements. For example, LED flash light shaping elements, the secondary camera, ambient light and proximity sensors. Wherever light is involved, micro-optics offers the chance to further miniaturize a device, to improve its performance, or to reduce manufacturing and packaging costs. Wafer-scale micro-optics fabrication is based on technology established by the semiconductor industry. Thousands of components are fabricated in parallel on a wafer. This review paper recapitulates major steps and inventions in wafer-scale micro-optics technology. The state-of-the-art of fabrication, testing and packaging technology is summarized.

Optical phased array configuration for an extremely large telescope.

PubMed

Meinel, Aden Baker; Meinel, Marjorie Pettit

2004-01-20

Extremely large telescopes are currently under consideration by several groups in several countries. Extrapolation of current technology up to 30 m indicates a cost of over dollars 1 billion. Innovative concepts are being explored to find significant cost reductions. We explore the concept of an Optical Phased Array (OPA) telescope. Each element of the OPA is a separate Cassegrain telescope. Collimated beams from the array are sent via an associated set of delay lines to a central beam combiner. This array of small telescope elements offers the possibility of starting with a low-cost array of a few rings of elements, adding structure and additional Cass elements until the desired diameter telescope is attained. We address the salient features of such an extremely large telescope and cost elements relative to more conventional options.

Elements of Effective E-Learning Design

ERIC Educational Resources Information Center

Brown, Andrew R.; Voltz, Bradley D.

2005-01-01

Preparing and developing e-learning materials is a costly and time consuming enterprise. This paper highlights the elements of effective design that we consider assist in the development of high quality materials in a cost efficient way. We introduce six elements of design and discuss each in some detail. These elements focus on paying attention…

Low-cost infrared glass for IR imaging applications

NASA Astrophysics Data System (ADS)

Graham, Amy G.; LeBlanc, Richard A.; Hilton, Ray A., Sr.

2003-09-01

With the advent of the uncooled detectors, the fraction of infrared (IR) imaging system cost due to lens elements has risen to the point where work was needed in the area of cost. Since these IR imaging systems often have tight packaging requirements which drive the optical elements to have complex surfaces, typical IR optical elements are costly to manufacture. The drive of our current optical material research is to lower the cost of the materials as well as the element fabrication for IR imaging systems. A low cost, moldable amorphous material, Amtir-4, has been developed and characterized. Ray Hilton Sr., Amorphous Materials Inc., Richard A. LeBlanc, Amy Graham and Others at Lockheed Martin Missiles and Fire Control Orlando (LMMFC-O) and James Johnson, General Electric Global Research Center (GE-GRC), along with others have been doing research for the past three years characterizing and designing IR imaging systems with this material. These IR imaging systems have been conventionally fabricated via diamond turning and techniques required to mold infrared optical elements have been developed with this new material, greatly reducing manufacturing costs. This paper will outline efforts thus far in incorporating this new material into prototype IR imaging systems.

Influence on bone metabolism of dietary trace elements, protein, fat, carbohydrates, and vitamins.

PubMed

Sarazin, M; Alexandre, C; Thomas, T

2000-01-01

Osteoporosis is a multifactorial disease driven primarily by the genetic factors that control bone metabolism. Among environmental factors, diet may play a key role, affording a target for low-cost intervention. Calcium and vitamin D are well known to affect bone metabolism. Other nutrients may influence bone mass changes; for instance, a number of trace elements and vitamins other than vitamin D are essential to many of the steps of bone metabolism. A wide variety of foods provide these nutrients, and in industrialized countries deficiencies are more often due to idiosyncratic eating habits than to cultural influences. Both culture and vogue influence the amount of carbohydrate, fat, and protein in the typical diet. In children, the current trend is to reduce protein and to increase carbohydrate and fat. Data from epidemiological and animal studies suggest that this may adversely affect bone mass and the fracture risk.

Procurement of Architectural and Engineering Services for Sustainable Buildings: A Guide for Federal Project Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2004-06-01

This guide was prepared to be a resource for federal construction project managers and others who want to integrate the principles of sustainable design into the procurement of professional building design and consulting services. To economize on energy costs and improve the safety, comfort, and health of building occupants, building design teams can incorporate daylighting, energy efficiency, renewable energy, and passive solar design into all projects in which these elements are technically and economically feasible. The information presented here will help project leaders begin the process and manage the inclusion of sustainable design in the procurement process. The section onmore » establishing selection criteria contains key elements to consider before selecting an architectural and engineering (A/E) firm. The section on preparing the statement of work discusses the broad spectrum of sustainable design services that an A/E firm can provide. Several helpful checklists are included.« less

The role of technical assistance in the replication of effective HIV interventions.

PubMed

O'Donnell, L; Scattergood, P; Adler, M; Doval, A S; Barker, M; Kelly, J A; Kegeles, S M; Rebchook, G M; Adams, J; Terry, M A; Neumann, M S

2000-01-01

This article examines the role of technical assistance (TA) in supporting the replication of proven HIV interventions. A case study of the replication of the VOICES/VOCES intervention elucidates the level and types of TA provided to support new users through the adoption process. TA included help in garnering administrative support, identifying target audiences, recruiting groups for sessions, maintaining fidelity to the intervention's core elements, tailoring the intervention to meet clients' needs, strengthening staff members' facilitation skills, troubleshooting challenges, and devising strategies to sustain the intervention. Two to four hours per month of TA were provided to each agency adopting the intervention, at an estimated monthly cost of $206 to $412. Findings illustrate how TA supports replication by establishing a conversation between the researcher TA providers experienced with the intervention and new users. This communication helps preserve key program elements and contributes to ongoing refinement of the intervention.

Creating an institutional resource for research education and career development: a novel model from Oregon Clinical and Translational Research Institute.

PubMed

Morris, Cynthia D; McCracken, Karen; Samuels, Mary; Orwoll, Eric

2014-06-01

We have created an education and career development program within the CTSA structure at OHSU that serves the entire institution. We believe that this is unusual in scope among CTSA programs and has contributed to an increase in career development funding and research skills among fellows and faculty. While the key element is the institutional scope, important elements include: Tailoring programs of emphasis to points of inflection on the career pathway. Minimizing barriers to education by creating a flexible, tuition-free program. An integrated one-stop education and career development approach. An institutional program for career development award applicants as well as recipients. This career development program was developed within the context of a midsize health science university but the overall strategy may be applied to other CTSAs to simplify and reduce costs of education program development.

Operation's Concept for Array-Based Deep Space Network

NASA Technical Reports Server (NTRS)

Bagri, Durgadas S.; Statman, Joseph I.; Gatti, Mark S.

2005-01-01

The Array-based Deep Space Network (DSNArray) will be a part of more than 10(exp 3) times increase in the downlink/telemetry capability of the Deep space Network (DSN). The key function of the DSN-Array is to provide cost-effective, robust Telemetry, Tracking and Command (TT&C) services to the space missions of NASA and its international partners. It provides an expanded approach to the use of an array-based system. Instead of using the array as an element in the existing DSN, relying to a large extent on the DSN infrastructure, we explore a broader departure from the current DSN, using fewer elements of the existing DSN, and establishing a more modern Concept of Operations. This paper gives architecture of DSN-Array and its operation's philosophy. It also describes customer's view of operations, operations management and logistics - including maintenance philosophy, anomaly analysis and reporting.

Community engagement as conflict prevention: Understanding the social license to operate

NASA Astrophysics Data System (ADS)

Knih, Dejana

This thesis examines community engagement as a form of conflict prevention in order to obtain the social license to operate (SLO) in Alberta's oil and gas industry. It does this by answering the question: what are the key elements of the Social License to Operate and how can these elements be applied to community engagement/consultation in a way that prevents conflicts in Alberta's oil and gas industry? The underlying assumption of this thesis is that building good relationships and working collaboratively functions as a form of conflict prevention and that this in turn leads to the SLO. This thesis outlines the key features of both successful community engagement and of the SLO, to provide a guideline for what is needed to obtain the SLO. Data was collected from semi-structured interviews and through a literature review. The data analysis concluded that there are direct parallels between the key elements of effective community engagement and the key elements of the SLO as identified in the interviews. These parallels are: knowing the community, addressing community needs, corporate social responsibility, relationship building, follow through and evidence for what has been done, executive buy-in, excellent communication, and open dialogue, all within a process which is principled (there is trust, understanding, transparency and respect), inclusive, dynamic, flexible, ongoing, and long-term. Moreover, the key elements of effective community engagement and of the SLO identified in the interviews also overlapped with those found in the literature review, with only one exception. The literature review explicitly named early involvement as a key element of both effective community engagement and the SLO, whereas the interview participants only explicitly indicated it as a key factor of community engagement and implied it to be a key element of the SLO.

Potential travel cost saving in urban public-transport networks using smartphone guidance

PubMed Central

2018-01-01

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers’ preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger’s choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost. PMID:29746528

A Cost Element Structure for Defense Training. Final Report.

ERIC Educational Resources Information Center

Knapp, Mark I.; Orlansky, Jesse

This paper identifies, structures, and defines a list of cost elements that is intended to describe fully the life-cycle cost of any formal program, course, or device for individual training of Department of Defense personnel. It was developed to provide consistent, comparable, and credible evaluations of the cost-effectiveness of alternative…

The High Rise Low Cost Housing : Sustainable Neighbourhood Elements (Green Elements) in Malaysia

NASA Astrophysics Data System (ADS)

Wahi, Noraziah; Mohamad, Ismail; Mohamad Zin, Rosli; Munikanan, Vikneswaran; Junaini, Syahrizan

2018-03-01

The sustainable development is a vital measure to alleviate the greenhouse gas effect, global warming and any other environment issues. The sustainable neighbourhood concept is not new in Malaysia, However, the concept still needs attention and awareness from the stakeholders. This paper discusses on the sustainable neighbourhood elements specifically green elements application on the high rise low cost housing in Malaysia. Malaysia should have focused sustainable neighbourhood planning and design especially on the high rise low cost housing therefore the future generation can be benefited from this type development.

What is the cost of providing outpatient HIV counseling and testing and antiretroviral therapy services in selected public health facilities in Nigeria?

PubMed

Aliyu, Husaina Bello; Chuku, Nkata Nwani; Kola-Jebutu, Abimbola; Abubakar, Zubaida; Torpey, Kwasi; Chabikuli, Otto Nzapfurundi

2012-10-01

Limited data on actual cost of providing HIV/AIDS services in Nigeria makes planning difficult. A study was conducted in 9 public health facilities supported by the Global HIV/AIDS Initiative Nigeria. The objective was to determine the cost of outpatient HIV Testing and Counseling (HTC) and antiretroviral therapy (ART) services per patient. Two tertiary and 7 secondary facilities were purposively selected across the six geopolitical regions. Facilities were distributed in urban and rural settings. Utilization and cost data for a 12-month period (January to December 2010) were analyzed. Cost elements included consumables, human resources, infrastructure, trainings, facility management, and Global HIV/AIDS Initiative Nigeria technical support. Total costs were apportioned based on percentage utilization by services, and unit costs were derived by dividing resource inputs by service outputs. Data were analyzed using Microsoft Excel 2003. A sensitivity analysis was also conducted for key assumptions. Mean costs for HTC and ART were US $7.4 and US $209.0, respectively. Costs were higher in Northern facilities (US $6.9, US $250.8), compared with Southern ones (US $6.7, US $194.7); and in tertiary facilities ($18.5, $338.4), compared with secondary ones ($6.3, $204.9). Major cost drivers for HTC and ART were human resources--ranging from 62% to 50%, and ARV drugs--ranging from 54% to 31%, respectively. Governments' ability to negotiate lower priced antiretroviral drugs will be central to reducing the cost of ART. Additionally, use of lower cadre staff to provide HTC will reduce costs and improves efficiency.

The cost-effectiveness of a child nutrition education programme in Peru.

PubMed

Waters, Hugh R; Penny, Mary E; Creed-Kanashiro, Hilary M; Robert, Rebecca C; Narro, Rocío; Willis, Jeff; Caulfield, Laura E; Black, Robert E

2006-07-01

This article reports impact and cost results from a health facility-based nutrition education programme targeting children less than 2 years of age in Trujillo, Peru. Key elements of the programme included participative complementary feeding demonstrations, growth monitoring sessions and an accreditation process. Data were collected from six intervention and six control health facilities to measure utilization and costs associated with the intervention. To calculate the unit costs of services, these costs are allocated using activity-based costing. To measure the effects of the intervention, 338 children were followed through household surveys at regular intervals from birth until the age of 18 months. The intervention had a clear positive impact both on the use of nutrition-related services and on children's growth outcomes. Children in the intervention areas made 17.6 visits to health facilities in the first 18 months of life, compared with 14.1 visits for children in the control areas (P < 0.001). This pattern holds true for all socioeconomic groups. The intervention prevented 11.1 cases of stunting per 100 children. In multivariate logistic regression analysis, children in the intervention were 0.33 times as likely to be stunted as the controls (P = 0.002). The marginal cost of the intervention - including external costs, training, health education materials and extra travel and equipment - is 6.12 US dollars per child reached and 55.16 US dollars per case of stunting prevented. The estimated marginal cost of the intervention per death averted is 1952 US dollars.

Spectral-element Method for 3D Marine Controlled-source EM Modeling

NASA Astrophysics Data System (ADS)

Liu, L.; Yin, C.; Zhang, B., Sr.; Liu, Y.; Qiu, C.; Huang, X.; Zhu, J.

2017-12-01

As one of the predrill reservoir appraisal methods, marine controlled-source EM (MCSEM) has been widely used in mapping oil reservoirs to reduce risk of deep water exploration. With the technical development of MCSEM, the need for improved forward modeling tools has become evident. We introduce in this paper spectral element method (SEM) for 3D MCSEM modeling. It combines the flexibility of finite-element and high accuracy of spectral method. We use Galerkin weighted residual method to discretize the vector Helmholtz equation, where the curl-conforming Gauss-Lobatto-Chebyshev (GLC) polynomials are chosen as vector basis functions. As a kind of high-order complete orthogonal polynomials, the GLC have the characteristic of exponential convergence. This helps derive the matrix elements analytically and improves the modeling accuracy. Numerical 1D models using SEM with different orders show that SEM method delivers accurate results. With increasing SEM orders, the modeling accuracy improves largely. Further we compare our SEM with finite-difference (FD) method for a 3D reservoir model (Figure 1). The results show that SEM method is more effective than FD method. Only when the mesh is fine enough, can FD achieve the same accuracy of SEM. Therefore, to obtain the same precision, SEM greatly reduces the degrees of freedom and cost. Numerical experiments with different models (not shown here) demonstrate that SEM is an efficient and effective tool for MSCEM modeling that has significant advantages over traditional numerical methods.This research is supported by Key Program of National Natural Science Foundation of China (41530320), China Natural Science Foundation for Young Scientists (41404093), and Key National Research Project of China (2016YFC0303100, 2017YFC0601900).

The Role of Technology for Achieving Climate Policy Objectives: Overview of the EMF 27 Study on Technology Strategies and Climate Policy Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriegler, Elmar; Weyant, John; Blanford, Geoffrey J.

2014-04-01

This article presents the synthesis of results from the Stanford Energy Modeling Forum Study 27, an inter-comparison of 19 energy-economy and integrated assessment models. The study investigated the value of individual mitigation technologies such as energy intensity improvements, carbon capture and sequestration (CCS), nuclear power, solar and wind power and bioenergy for climate mitigation. Achieving atmospheric greenhouse gas concentration targets at 450 and 550 ppm CO2 equivalent requires massive greenhouse gas emissions reductions. A fragmented policy approach at the level of current ambition is inconsistent with these targets. The availability of a negative emissions technology, in most models biofuels withmore » CCS, proved to be a key element for achieving the climate targets. Robust characteristics of the transformation of the energy system are increased energy intensity improvements and the electrification of energy end use coupled with a fast decarbonization of the electricity sector. Non-electric energy end use is hardest to decarbonize, particularly in the transport sector. Technology is a key element of climate mitigation. Versatile technologies such as CCS and bioenergy have largest value, due in part to their combined ability to produce negative emissions. The individual value of low-carbon power technologies is more limited due to the many alternatives in the sector. The scale of the energy transformation is larger for the 450 ppm than for the 550 ppm CO2e target. As a result, the achievability and the costs of the 450 ppm target are more sensitive to variations in technology variability. Mitigation costs roughly double when moving from 550 ppm to 450 ppm CO2e, but remain below 3% of GDP for most models.« less

Constellation Program Life-cycle Cost Analysis Model (LCAM)

NASA Technical Reports Server (NTRS)

Prince, Andy; Rose, Heidi; Wood, James

2008-01-01

The Constellation Program (CxP) is NASA's effort to replace the Space Shuttle, return humans to the moon, and prepare for a human mission to Mars. The major elements of the Constellation Lunar sortie design reference mission architecture are shown. Unlike the Apollo Program of the 1960's, affordability is a major concern of United States policy makers and NASA management. To measure Constellation affordability, a total ownership cost life-cycle parametric cost estimating capability is required. This capability is being developed by the Constellation Systems Engineering and Integration (SE&I) Directorate, and is called the Lifecycle Cost Analysis Model (LCAM). The requirements for LCAM are based on the need to have a parametric estimating capability in order to do top-level program analysis, evaluate design alternatives, and explore options for future systems. By estimating the total cost of ownership within the context of the planned Constellation budget, LCAM can provide Program and NASA management with the cost data necessary to identify the most affordable alternatives. LCAM is also a key component of the Integrated Program Model (IPM), an SE&I developed capability that combines parametric sizing tools with cost, schedule, and risk models to perform program analysis. LCAM is used in the generation of cost estimates for system level trades and analyses. It draws upon the legacy of previous architecture level cost models, such as the Exploration Systems Mission Directorate (ESMD) Architecture Cost Model (ARCOM) developed for Simulation Based Acquisition (SBA), and ATLAS. LCAM is used to support requirements and design trade studies by calculating changes in cost relative to a baseline option cost. Estimated costs are generally low fidelity to accommodate available input data and available cost estimating relationships (CERs). LCAM is capable of interfacing with the Integrated Program Model to provide the cost estimating capability for that suite of tools.

Flip chip bumping technology—Status and update

NASA Astrophysics Data System (ADS)

Juergen Wolf, M.; Engelmann, Gunter; Dietrich, Lothar; Reichl, Herbert

2006-09-01

Flip chip technology is a key driver for new complex system architectures and high-density packaging, e.g. sensor or pixel devices. Bumped wafers/dice as key elements become very important in terms of general availability at low cost, high yield and quality level. Today, different materials, e.g. Au, Ni, AuSn, SnAg, SnAgCu, SnCu, etc., are used for flip chip interconnects and different bumping approaches are available. Electroplating is the technology of choice for high-yield wafer bumping for small bump sizes and pitches. Lead-free solder bumps require an increase in knowledge in the field of under bump metallization (UBM) and the interaction of bump and substrate metallization, the formation and growth of intermetallic compounds (IMCs) during liquid- and solid-phase reactions. Results of a new bi-layer UBM of Ni-Cu which is especially designed for small-sized lead-free solder bumps will be discussed.

An Integrated Data-Driven Strategy for Safe-by-Design Nanoparticles: The FP7 MODERN Project.

PubMed

Brehm, Martin; Kafka, Alexander; Bamler, Markus; Kühne, Ralph; Schüürmann, Gerrit; Sikk, Lauri; Burk, Jaanus; Burk, Peeter; Tamm, Tarmo; Tämm, Kaido; Pokhrel, Suman; Mädler, Lutz; Kahru, Anne; Aruoja, Villem; Sihtmäe, Mariliis; Scott-Fordsmand, Janeck; Sorensen, Peter B; Escorihuela, Laura; Roca, Carlos P; Fernández, Alberto; Giralt, Francesc; Rallo, Robert

2017-01-01

The development and implementation of safe-by-design strategies is key for the safe development of future generations of nanotechnology enabled products. The safety testing of the huge variety of nanomaterials that can be synthetized is unfeasible due to time and cost constraints. Computational modeling facilitates the implementation of alternative testing strategies in a time and cost effective way. The development of predictive nanotoxicology models requires the use of high quality experimental data on the structure, physicochemical properties and bioactivity of nanomaterials. The FP7 Project MODERN has developed and evaluated the main components of a computational framework for the evaluation of the environmental and health impacts of nanoparticles. This chapter describes each of the elements of the framework including aspects related to data generation, management and integration; development of nanodescriptors; establishment of nanostructure-activity relationships; identification of nanoparticle categories; hazard ranking and risk assessment.

Low cost photonic comb for sub-m/s wavelength calibration

NASA Astrophysics Data System (ADS)

Betters, Christopher H.; Hermouet, Maxime; Blanc, Thomas; Colless, James I.; Bland-Hawthorn, Joss; Kos, Janez; Leon-Saval, Sergio

2016-07-01

A fundamental limitation of precision radial velocity measurements is the accuracy and stability of the calibration source. Here we present a low-cost alternative to more complex laser metrology based systems that utilises a single-mode fibre Fabry-Perot etalon. There are three key elements on this photonic comb: i) an optical fibre etalon with thermo-electric coolers; ii) a Rubidium Saturation Absorption Spectroscopy (SAS) setup; and iii) an optical fibre switch system for simultaneous laser locking of the etalon. We simultaneously measure the Rubidium D2 transitions around 780.2 nm and the closest etalon line. A PID loop controls the etalon temperate to maintain the position of its peak with an RMS error of <10cm/s for 10 minute integration intervals in continous operation. The optical fibre switch system allows for a time multiplexed coupling of the etalon to a spectrograph and SAS system.

Vertical organic transistors.

PubMed

Lüssem, Björn; Günther, Alrun; Fischer, Axel; Kasemann, Daniel; Leo, Karl

2015-11-11

Organic switching devices such as field effect transistors (OFETs) are a key element of future flexible electronic devices. So far, however, a commercial breakthrough has not been achieved because these devices usually lack in switching speed (e.g. for logic applications) and current density (e.g. for display pixel driving). The limited performance is caused by a combination of comparatively low charge carrier mobilities and the large channel length caused by the need for low-cost structuring. Vertical Organic Transistors are a novel technology that has the potential to overcome these limitations of OFETs. Vertical Organic Transistors allow to scale the channel length of organic transistors into the 100 nm regime without cost intensive structuring techniques. Several different approaches have been proposed in literature, which show high output currents, low operation voltages, and comparatively high speed even without sub-μm structuring technologies. In this review, these different approaches are compared and recent progress is highlighted.

Hyperspectral imaging-based credit card verifier structure with adaptive learning.

PubMed

Sumriddetchkajorn, Sarun; Intaravanne, Yuttana

2008-12-10

We propose and experimentally demonstrate a hyperspectral imaging-based optical structure for verifying a credit card. Our key idea comes from the fact that the fine detail of the embossed hologram stamped on the credit card is hard to duplicate, and therefore its key color features can be used for distinguishing between the real and counterfeit ones. As the embossed hologram is a diffractive optical element, we shine a number of broadband light sources one at a time, each at a different incident angle, on the embossed hologram of the credit card in such a way that different color spectra per incident angle beam are diffracted and separated in space. In this way, the center of mass of the histogram on each color plane is investigated by using a feed-forward backpropagation neural-network configuration. Our experimental demonstration using two off-the-shelf broadband white light emitting diodes, one digital camera, and a three-layer neural network can effectively identify 38 genuine and 109 counterfeit credit cards with false rejection rates of 5.26% and 0.92%, respectively. Key features include low cost, simplicity, no moving parts, no need of an additional decoding key, and adaptive learning.

Report of the Cost Assessment and Validation Task Force on the International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

The Cost Assessment and Validation (CAV) Task Force was established for independent review and assessment of cost, schedule and partnership performance on the International Space Station (ISS) Program. The CAV Task Force has made the following key findings: The International Space Station Program has made notable and reasonable progress over the past four years in defining and executing a very challenging and technically complex effort. The Program size, complexity, and ambitious schedule goals were beyond that which could be reasonably achieved within the $2.1 billion annual cap or $17.4 billion total cap. A number of critical risk elements are likely to have an adverse impact on the International Space Station cost and schedule. The schedule uncertainty associated with Russian implementation of joint Partnership agreements is the major threat to the ISS Program. The Fiscal Year (FY) 1999 budget submission to Congress is not adequate to execute the baseline ISS Program, cover normal program growth, and address the known critical risks. Additional annual funding of between $130 million and $250 million will be required. Completion of ISS assembly is likely to be delayed from one to three years beyond December 2003.

Cost Assessment and Validation Task Force on the International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

The Cost Assessment and Validation (CAV) Task Force was established for independent review and assessment of cost, schedule and partnership performance on the International Space Station (ISS) Program. The CAV Task Force has made the following key findings: The International Space Station Program has made notable and reasonable progress over the past four years in defining and executing a very challenging and technically complex effort; The Program, size, complexity, and ambitious schedule goals were beyond that which could be reasonably achieved within the $2.1 billion annual cap or $17.4 billion total cap; A number of critical risk elements are likely to have an adverse impact on the International Space Station cost and schedule; The schedule uncertainty associated with Russian implementation of joint Partnership agreements is the major threat to the ISS Program; The Fiscal Year (FY) 1999 budget submission to Congress is not adequate to execute the baseline ISS Program, cover normal program, growth, and address the known critical risks. Additional annual funding of between $130 million and $250 million will be required; and Completion of ISS assembly is likely to be delayed from, one to three years beyond December 2003.

Links between social environment and health care utilization and costs.

PubMed

Brault, Marie A; Brewster, Amanda L; Bradley, Elizabeth H; Keene, Danya; Tan, Annabel X; Curry, Leslie A

2018-01-01

The social environment influences health outcomes for older adults and could be an important target for interventions to reduce costly medical care. We sought to understand which elements of the social environment distinguish communities that achieve lower health care utilization and costs from communities that experience higher health care utilization and costs for older adults with complex needs. We used a sequential explanatory mixed methods approach. We classified community performance based on three outcomes: rate of hospitalizations for ambulatory care sensitive conditions, all-cause risk-standardized hospital readmission rates, and Medicare spending per beneficiary. We conducted in-depth interviews with key informants (N = 245) from organizations providing health or social services. Higher performing communities were distinguished by several aspects of social environment, and these features were lacking in lower performing communities: 1) strong informal support networks; 2) partnerships between faith-based organizations and health care and social service organizations; and 3) grassroots organizing and advocacy efforts. Higher performing communities share similar social environmental features that complement the work of health care and social service organizations. Many of the supportive features and programs identified in the higher performing communities were developed locally and with limited governmental funding, providing opportunities for improvement.

Procedure for minimizing the cost per watt of photovoltaic systems

NASA Technical Reports Server (NTRS)

Redfield, D.

1977-01-01

A general analytic procedure is developed that provides a quantitative method for optimizing any element or process in the fabrication of a photovoltaic energy conversion system by minimizing its impact on the cost per watt of the complete system. By determining the effective value of any power loss associated with each element of the system, this procedure furnishes the design specifications that optimize the cost-performance tradeoffs for each element. A general equation is derived that optimizes the properties of any part of the system in terms of appropriate cost and performance functions, although the power-handling components are found to have a different character from the cell and array steps. Another principal result is that a fractional performance loss occurring at any cell- or array-fabrication step produces that same fractional increase in the cost per watt of the complete array. It also follows that no element or process step can be optimized correctly by considering only its own cost and performance

Unmanned Aerial Vehicles unique cost estimating requirements

NASA Astrophysics Data System (ADS)

Malone, P.; Apgar, H.; Stukes, S.; Sterk, S.

Unmanned Aerial Vehicles (UAVs), also referred to as drones, are aerial platforms that fly without a human pilot onboard. UAVs are controlled autonomously by a computer in the vehicle or under the remote control of a pilot stationed at a fixed ground location. There are a wide variety of drone shapes, sizes, configurations, complexities, and characteristics. Use of these devices by the Department of Defense (DoD), NASA, civil and commercial organizations continues to grow. UAVs are commonly used for intelligence, surveillance, reconnaissance (ISR). They are also use for combat operations, and civil applications, such as firefighting, non-military security work, surveillance of infrastructure (e.g. pipelines, power lines and country borders). UAVs are often preferred for missions that require sustained persistence (over 4 hours in duration), or are “ too dangerous, dull or dirty” for manned aircraft. Moreover, they can offer significant acquisition and operations cost savings over traditional manned aircraft. Because of these unique characteristics and missions, UAV estimates require some unique estimating methods. This paper describes a framework for estimating UAV systems total ownership cost including hardware components, software design, and operations. The challenge of collecting data, testing the sensitivities of cost drivers, and creating cost estimating relationships (CERs) for each key work breakdown structure (WBS) element is discussed. The autonomous operation of UAVs is especially challenging from a software perspective.

A Systematic Review of Cost-Sharing Strategies Used within Publicly-Funded Drug Plans in Member Countries of the Organisation for Economic Co-Operation and Development

PubMed Central

Barnieh, Lianne; Clement, Fiona; Harris, Anthony; Blom, Marja; Donaldson, Cam; Klarenbach, Scott; Husereau, Don; Lorenzetti, Diane; Manns, Braden

2014-01-01

Background Publicly-funded drug plans vary in strategies used and policies employed to reduce continually increasing pharmaceutical expenditures. We systematically reviewed the utilization of cost-sharing strategies and physician-directed prescribing regulations in publicly-funded formularies within member nations of the Organization of Economic Cooperation and Development (OECD). Methods & Findings Using the OECD nations as the sampling frame, a search for cost-sharing strategies and physician-directed prescribing regulations was done using published and grey literature. Collected data was verified by a system expert within the prescription drug insurance plan in each country, to ensure the accuracy of key data elements across plans. Significant variation in the use of cost-sharing mechanisms was seen. Copayments were the most commonly used cost-containment measure, though their use and amount varied for those with certain conditions, most often chronic diseases (in 17 countries), and by socio-economic status (either income or employment status), or with age (in 15 countries). Caps and deductibles were only used by five systems. Drug cost-containment strategies targeting physicians were also identified in 24 countries, including guideline-based prescribing, prescription monitoring and incentive structures. Conclusions There was variable use of cost-containment strategies to limit pharmaceutical expenditures in publicly funded formularies within OECD countries. Further research is needed to determine the best approach to constrain costs while maintaining access to pharmaceutical drugs. PMID:24618721

SDMS: A scientific data management system

NASA Technical Reports Server (NTRS)

Massena, W. A.

1978-01-01

SDMS is a data base management system developed specifically to support scientific programming applications. It consists of a data definition program to define the forms of data bases, and FORTRAN-compatible subroutine calls to create and access data within them. Each SDMS data base contains one or more data sets. A data set has the form of a relation. Each column of a data set is defined to be either a key or data element. Key elements must be scalar. Data elements may also be vectors or matrices. The data elements in each row of the relation form an element set. SDMS permits direct storage and retrieval of an element set by specifying the corresponding key element values. To support the scientific environment, SDMS allows the dynamic creation of data bases via subroutine calls. It also allows intermediate or scratch data to be stored in temporary data bases which vanish at job end.

Incorporating psychological influences in probabilistic cost analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kujawski, Edouard; Alvaro, Mariana; Edwards, William

2004-01-08

Today's typical probabilistic cost analysis assumes an ''ideal'' project that is devoid of the human and organizational considerations that heavily influence the success and cost of real-world projects. In the real world ''Money Allocated Is Money Spent'' (MAIMS principle); cost underruns are rarely available to protect against cost overruns while task overruns are passed on to the total project cost. Realistic cost estimates therefore require a modified probabilistic cost analysis that simultaneously models the cost management strategy including budget allocation. Psychological influences such as overconfidence in assessing uncertainties and dependencies among cost elements and risks are other important considerations thatmore » are generally not addressed. It should then be no surprise that actual project costs often exceed the initial estimates and are delivered late and/or with a reduced scope. This paper presents a practical probabilistic cost analysis model that incorporates recent findings in human behavior and judgment under uncertainty, dependencies among cost elements, the MAIMS principle, and project management practices. Uncertain cost elements are elicited from experts using the direct fractile assessment method and fitted with three-parameter Weibull distributions. The full correlation matrix is specified in terms of two parameters that characterize correlations among cost elements in the same and in different subsystems. The analysis is readily implemented using standard Monte Carlo simulation tools such as {at}Risk and Crystal Ball{reg_sign}. The analysis of a representative design and engineering project substantiates that today's typical probabilistic cost analysis is likely to severely underestimate project cost for probability of success values of importance to contractors and procuring activities. The proposed approach provides a framework for developing a viable cost management strategy for allocating baseline budgets and contingencies. Given the scope and magnitude of the cost-overrun problem, the benefits are likely to be significant.« less

Upper-Stage Flight Experiment

NASA Technical Reports Server (NTRS)

Anderson, W. E.; Boxwell, R.; Crockett, D. V.; Ross, R.; Lewis, T.; McNeal, C.; Verdarame, K.

1999-01-01

For propulsion applications that require that the propellants are storable for long periods, have a high density impulse, and are environmentally clean and non-toxic, the best choice is a combination of high-concentration hydrogen peroxide (High Test Peroxide, or HTP) and a liquid hydrocarbon (LHC) fuel. The HTP/LHC combination is suitable for low-cost launch vehicles, space taxi and space maneuvering vehicles, and kick stages. Orbital Sciences Corporation is under contract with the NASA Marshall Space Flight Center in cooperation with the Air Force Research Lab to design, develop and demonstrate a new low-cost liquid upper stage based on HTP and JP-8. The Upper Stage Flight Experiment (USFE) focuses on key technologies necessary to demonstrate the operation of an inherently simple propulsion system with an innovative, state-of-the-art structure. Two key low-cost vehicle elements will be demonstrated - a 10,000 lbf thrust engine and an integrated composite tank structure. The suborbital flight test of the USFE is scheduled for 2001. Preceding the flight tests are two major series of ground tests at NASA Stennis Space Center and a subscale tank development program to identify compatible composite materials and to verify their compatibility over long periods of time. The ground tests include a thrust chamber development test series and an integrated stage test. This paper summarizes the results from the first phase of the thrust chamber development tests and the results to date from the tank material compatibility tests. Engine and tank configurations that meet the goals of the program are described.

Ordered versus Unordered Map for Primitive Data Types

DTIC Science & Technology

2015-09-01

mapped to some element. C++ provides two types of map containers within the standard template library, the std ::map and the std ::unordered_map...classes. As the name implies, the containers main functional difference is that the elements in the std ::map are ordered by the key, and the std ...unordered_map are not ordered based on their key. The std ::unordered_map elements are placed into “buckets” based on a hash value computed for their key

Creating value-added linkages through creative programming: a partnership for nursing education.

PubMed

Caldwell, Linda M; Luke, Gerri; Tenofsky, Linda M

2007-01-01

Academic and clinical institutions can effectively collaborate to deliver programs that enhance the educational level of the nursing staff. Creative programming, which offers flexibility and convenience, and a reasonable cost are key elements in the success of a program. Open communication and mutual recognition and respect of the talents, abilities, and values of all developers of the program are essential factors in effective collaborations leading to successful partnerships. Although clear expectations and clarity of functions are important once the partnership has developed, flexibility and a desire to "own" both the problems and the successes of a program are crucial to success.

Rotorcraft digital advanced avionics system (RODAAS) functional description

NASA Technical Reports Server (NTRS)

Peterson, E. M.; Bailey, J.; Mcmanus, T. J.

1985-01-01

A functional design of a rotorcraft digital advanced avionics system (RODAAS) to transfer the technology developed for general aviation in the Demonstration Advanced Avionics System (DAAS) program to rotorcraft operation was undertaken. The objective was to develop an integrated avionics system design that enhances rotorcraft single pilot IFR operations without increasing the required pilot training/experience by exploiting advanced technology in computers, busing, displays and integrated systems design. A key element of the avionics system is the functionally distributed architecture that has the potential for high reliability with low weight, power and cost. A functional description of the RODAAS hardware and software functions is presented.

Honeywell optical investigations on FLASH program

NASA Astrophysics Data System (ADS)

O'Rourke, Ken; Peterson, Eric; Yount, Larry

1995-05-01

The increasing performance and reduction of life cycle cost requirements placed on commercial and military transport aircraft are resulting in more complex, highly integrated aircraft control and management systems. The use of fiber optic data transmission media can make significant contributions in achieving these performance and cost goals. The Honeywell portion of Task 2A on the Fly-by-Light Advanced System Hardware (FLASH) program is evaluating a Primary Flight Control System (PFCS) using pilot and copilot inputs from Active Hand Controllers (AHC) which are optically linked to the primary flight Control Computers (PFCC). Customer involvement is an important element of the Task 2A activity. Establishing customer requirements and perspectives on productization of systems developed under FLASH are key to future product success. The Honeywell elements of the PFCS demonstrator provide a command path that is optically interfaced from crew inputs to commands of distributed, smart actuation subsystems commands. Optical communication architectures are implemented using several protocols including the new AS-1773A 20 Mbps data bus standard. The interconnecting fiber optic cable plant is provided by our Task 1A teammate McDonnell Douglas Aerospace (West). Fiber optic cable plant fabrication uses processed, tools and materials reflecting necessary advances in manufacturing required to make fly-by-light avionics systems marketable.

Development and Evaluation of an Automated Machine Learning Algorithm for In-Hospital Mortality Risk Adjustment Among Critical Care Patients.

PubMed

Delahanty, Ryan J; Kaufman, David; Jones, Spencer S

2018-06-01

Risk adjustment algorithms for ICU mortality are necessary for measuring and improving ICU performance. Existing risk adjustment algorithms are not widely adopted. Key barriers to adoption include licensing and implementation costs as well as labor costs associated with human-intensive data collection. Widespread adoption of electronic health records makes automated risk adjustment feasible. Using modern machine learning methods and open source tools, we developed and evaluated a retrospective risk adjustment algorithm for in-hospital mortality among ICU patients. The Risk of Inpatient Death score can be fully automated and is reliant upon data elements that are generated in the course of usual hospital processes. One hundred thirty-one ICUs in 53 hospitals operated by Tenet Healthcare. A cohort of 237,173 ICU patients discharged between January 2014 and December 2016. The data were randomly split into training (36 hospitals), and validation (17 hospitals) data sets. Feature selection and model training were carried out using the training set while the discrimination, calibration, and accuracy of the model were assessed in the validation data set. Model discrimination was evaluated based on the area under receiver operating characteristic curve; accuracy and calibration were assessed via adjusted Brier scores and visual analysis of calibration curves. Seventeen features, including a mix of clinical and administrative data elements, were retained in the final model. The Risk of Inpatient Death score demonstrated excellent discrimination (area under receiver operating characteristic curve = 0.94) and calibration (adjusted Brier score = 52.8%) in the validation dataset; these results compare favorably to the published performance statistics for the most commonly used mortality risk adjustment algorithms. Low adoption of ICU mortality risk adjustment algorithms impedes progress toward increasing the value of the healthcare delivered in ICUs. The Risk of Inpatient Death score has many attractive attributes that address the key barriers to adoption of ICU risk adjustment algorithms and performs comparably to existing human-intensive algorithms. Automated risk adjustment algorithms have the potential to obviate known barriers to adoption such as cost-prohibitive licensing fees and significant direct labor costs. Further evaluation is needed to ensure that the level of performance observed in this study could be achieved at independent sites.

INMARSAT's personal communicator system

NASA Technical Reports Server (NTRS)

Hart, Nick; Haugli, HANS-C.; Poskett, Peter; Smith, K.

1993-01-01

Inmarsat has been providing near global mobile satellite communications since 1982 and Inmarsat terminals are currently being used in more than 130 countries. The terminals have been reduced in size and cost over the years and new technology has enabled the recent introduction of briefcase sized personal telephony terminals (Inmarsat-M). This trend continues and we are likely to see Inmarsat handheld terminals by the end of the decade. These terminals are called Inmarsat-P and this paper focuses on the various elements required to support a high quality service to handheld terminals. The main system elements are: the handheld terminals; the space segment with the associated orbits; and the gateways to terrestrial networks. It is both likely and desirable that personal handheld satellite communications will be offered by more than one system provider and this competition will ensure strong emphasis on service quality and cost of ownership. The handheld terminals also have to be attractive to a large number of potential users, and this means that the terminals must be small enough to fit in a pocket. Battery lifetime is another important consideration, and this coupled with radiation safety requirements limits the maximum radiated EIRP. The terminal G/T is mainly constrained by the gain of the omnidirectional antenna and the noise figure of the RF front end (including input losses). Inmarsat has examined, with the support of industry, a number of Geosynchronous (GSO), Medium Earth Orbit (MEO) and Low Earth Orbit (LEO) satellite options for the provision of a handheld mobile satellite service. This paper describes the key satellite and orbit parameters and tradeoffs which affect the overall quality of service and the space segment costing. The paper also stresses not only the importance of using and sharing the available mobile frequency band allocations efficiently, but also the key considerations affecting the choice of feeder link bands. The design of the gateways and the terrestrial network is critical to the overall viability of the service, and this paper also examines the key technical parameters associated with the Land Earth Stations (LES), which act as gateways into the Public Switched Telephone Network (PSTN). These not only include the design tradeoffs associated with the LES, but also the different terrestrial network interface options. The paper concludes with a brief description of the satellite propagation conditions associated with the use of handheld terminals. It describes how the handheld results in a number of propagation impairments which are not common to the previous measurements associated with vehicle mounted antennas. These measurements indicate that there is a complex tradeoff between link margin and the elevation angle to the satellite which has a significant impact on the space segment requirements and costing.

INMARSAT's personal communicator system

NASA Astrophysics Data System (ADS)

Hart, Nick; Haugli, Hans-C.; Poskett, Peter; Smith, K.

Inmarsat has been providing near global mobile satellite communications since 1982 and Inmarsat terminals are currently being used in more than 130 countries. The terminals have been reduced in size and cost over the years and new technology has enabled the recent introduction of briefcase sized personal telephony terminals (Inmarsat-M). This trend continues and we are likely to see Inmarsat handheld terminals by the end of the decade. These terminals are called Inmarsat-P and this paper focuses on the various elements required to support a high quality service to handheld terminals. The main system elements are: the handheld terminals; the space segment with the associated orbits; and the gateways to terrestrial networks. It is both likely and desirable that personal handheld satellite communications will be offered by more than one system provider and this competition will ensure strong emphasis on service quality and cost of ownership. The handheld terminals also have to be attractive to a large number of potential users, and this means that the terminals must be small enough to fit in a pocket. Battery lifetime is another important consideration, and this coupled with radiation safety requirements limits the maximum radiated EIRP. The terminal G/T is mainly constrained by the gain of the omnidirectional antenna and the noise figure of the RF front end (including input losses). Inmarsat has examined, with the support of industry, a number of Geosynchronous (GSO), Medium Earth Orbit (MEO) and Low Earth Orbit (LEO) satellite options for the provision of a handheld mobile satellite service. This paper describes the key satellite and orbit parameters and tradeoffs which affect the overall quality of service and the space segment costing. The paper also stresses not only the importance of using and sharing the available mobile frequency band allocations efficiently, but also the key considerations affecting the choice of feeder link bands. The design of the gateways and the terrestrial network is critical to the overall viability of the service, and this paper also examines the key technical parameters associated with the Land Earth Stations (LES), which act as gateways into the Public Switched Telephone Network (PSTN). These not only include the design tradeoffs associated with the LES, but also the different terrestrial network interface options. The paper concludes with a brief description of the satellite propagation conditions associated with the use of handheld terminals. It describes how the handheld results in a number of propagation impairments which are not common to the previous measurements associated with vehicle mounted antennas. These measurements indicate that there is a complex tradeoff between link margin and the elevation angle to the satellite which has a significant impact on the space segment requirements and costing.

NASA Information Technology Implementation Plan

NASA Technical Reports Server (NTRS)

2000-01-01

NASA's Information Technology (IT) resources and IT support continue to be a growing and integral part of all NASA missions. Furthermore, the growing IT support requirements are becoming more complex and diverse. The following are a few examples of the growing complexity and diversity of NASA's IT environment. NASA is conducting basic IT research in the Intelligent Synthesis Environment (ISE) and Intelligent Systems (IS) Initiatives. IT security, infrastructure protection, and privacy of data are requiring more and more management attention and an increasing share of the NASA IT budget. Outsourcing of IT support is becoming a key element of NASA's IT strategy as exemplified by Outsourcing Desktop Initiative for NASA (ODIN) and the outsourcing of NASA Integrated Services Network (NISN) support. Finally, technology refresh is helping to provide improved support at lower cost. Recently the NASA Automated Data Processing (ADP) Consolidation Center (NACC) upgraded its bipolar technology computer systems with Complementary Metal Oxide Semiconductor (CMOS) technology systems. This NACC upgrade substantially reduced the hardware maintenance and software licensing costs, significantly increased system speed and capacity, and reduced customer processing costs by 11 percent.

Costs of locomotion in polar bears: when do the costs outweigh the benefits of chasing down terrestrial prey?

PubMed

Gormezano, Linda J; McWilliams, Scott R; Iles, David T; Rockwell, Robert F

2016-01-01

Trade-offs between locomotory costs and foraging gains are key elements in determining constraints on predator-prey interactions. One intriguing example involves polar bears pursuing snow geese on land. As climate change forces polar bears to spend more time ashore, they may need to expend more energy to obtain land-based food. Given that polar bears are inefficient at terrestrial locomotion, any extra energy expended to pursue prey could negatively impact survival. However, polar bears have been regularly observed engaging in long pursuits of geese and other land animals, and the energetic worth of such behaviour has been repeatedly questioned. We use data-driven energetic models to examine how energy expenditures vary across polar bear mass and speed. For the first time, we show that polar bears in the 125-235 kg size range can profitably pursue geese, especially at slower speeds. We caution, however, that heat build-up may be the ultimate limiting factor in terrestrial chases, especially for larger bears, and this limit would be reached more quickly with warmer environmental temperatures.

Costs of locomotion in polar bears: when do the costs outweigh the benefits of chasing down terrestrial prey?

PubMed Central

Gormezano, Linda J.; McWilliams, Scott R.; Iles, David T.; Rockwell, Robert F.

2016-01-01

Trade-offs between locomotory costs and foraging gains are key elements in determining constraints on predator–prey interactions. One intriguing example involves polar bears pursuing snow geese on land. As climate change forces polar bears to spend more time ashore, they may need to expend more energy to obtain land-based food. Given that polar bears are inefficient at terrestrial locomotion, any extra energy expended to pursue prey could negatively impact survival. However, polar bears have been regularly observed engaging in long pursuits of geese and other land animals, and the energetic worth of such behaviour has been repeatedly questioned. We use data-driven energetic models to examine how energy expenditures vary across polar bear mass and speed. For the first time, we show that polar bears in the 125–235 kg size range can profitably pursue geese, especially at slower speeds. We caution, however, that heat build-up may be the ultimate limiting factor in terrestrial chases, especially for larger bears, and this limit would be reached more quickly with warmer environmental temperatures. PMID:27757238

DOD/NASA system impact analysis (study 2.1). Volume 1: Executive summary. [of space transportation costs

NASA Technical Reports Server (NTRS)

1973-01-01

Results are reported from a study made to determine engineering and cost analyses regarding the elements of space transportation systems. Specifically, a tug turnaround cost and abort modes and effects analyses were made. Study approach and objectives for both elements are given.

Static aeroelastic analysis of wings using Euler/Navier-Stokes equations coupled with improved wing-box finite element structures

NASA Technical Reports Server (NTRS)

Guruswamy, Guru P.; MacMurdy, Dale E.; Kapania, Rakesh K.

1994-01-01

Strong interactions between flow about an aircraft wing and the wing structure can result in aeroelastic phenomena which significantly impact aircraft performance. Time-accurate methods for solving the unsteady Navier-Stokes equations have matured to the point where reliable results can be obtained with reasonable computational costs for complex non-linear flows with shock waves, vortices and separations. The ability to combine such a flow solver with a general finite element structural model is key to an aeroelastic analysis in these flows. Earlier work involved time-accurate integration of modal structural models based on plate elements. A finite element model was developed to handle three-dimensional wing boxes, and incorporated into the flow solver without the need for modal analysis. Static condensation is performed on the structural model to reduce the structural degrees of freedom for the aeroelastic analysis. Direct incorporation of the finite element wing-box structural model with the flow solver requires finding adequate methods for transferring aerodynamic pressures to the structural grid and returning deflections to the aerodynamic grid. Several schemes were explored for handling the grid-to-grid transfer of information. The complex, built-up nature of the wing-box complicated this transfer. Aeroelastic calculations for a sample wing in transonic flow comparing various simple transfer schemes are presented and discussed.

Topological detector: measuring continuous dosimetric quantities with few-element detector array.

PubMed

Han, Zhaohui; Brivio, Davide; Sajo, Erno; Zygmanski, Piotr

2016-08-21

A prototype topological detector was fabricated and investigated for quality assurance of radiation producing medical devices. Unlike a typical array or flat panel detector, a topological detector, while capable of achieving a very high spatial resolution, consists of only a few elements and therefore is much simpler in construction and more cost effective. The key feature allowing this advancement is a geometry-driven design that is customized for a specific dosimetric application. In the current work, a topological detector of two elements was examined for the positioning verification of the radiation collimating devices (jaws, MLCs, and blades etc). The detector was diagonally segmented from a rectangular thin film strip (2.5 cm  ×  15 cm), giving two contiguous but independent detector elements. The segmented area was the central portion of the strip measuring 5 cm in length. Under irradiation, signals from each detector element were separately digitized using a commercial multichannel data acquisition system. The center and size of an x-ray field, which were uniquely determined by the collimator positions, were shown mathematically to relate to the difference and sum of the two signals. As a proof of concept, experiments were carried out using slit x-ray fields ranging from 2 mm to 20 mm in size. It was demonstrated that, the collimator positions can be accurately measured with sub-millimeter precisions.

The cost of noncooperation in international river basins

NASA Astrophysics Data System (ADS)

Tilmant, A.; Kinzelbach, W.

2012-01-01

In recent years there has been a renewed interest for water supply enhancement strategies in order to deal with the exploding demand for water in some regions, particularly in Asia and Africa. Within such strategies, reservoirs, especially multipurpose ones, are expected to play a key role in enhancing water security. This renewed impetus for the traditional supply-side approach to water management may indeed contribute to socioeconomic development and poverty reduction if the planning process considers the lessons learned from the past, which led to the recommendations by the World Commission on Dams and other relevant policy initiatives. More specifically, the issues dealing with benefit sharing within an efficient and equitable utilization of water resources are key elements toward the successful development of those river basins. Hence, there is a need for improved coordination and cooperation among water users, sectors, and riparian countries. However, few studies have explicitly tried to quantify, in monetary terms, the economic costs of noncooperation, which we believe to be important information for water managers and policy makers, especially at a time when major developments are planned. In this paper we propose a methodology to assess the economic costs of noncooperation when managing large-scale water resources systems involving multiple reservoirs, and where the dominant uses are hydropower generation and irrigated agriculture. An analysis of the Zambezi River basin, one of the largest river basins in Africa that is likely to see major developments in the coming decades, is carried out. This valuation exercise reveals that the yearly average cost of noncooperation would reach 350 million US$/a, which is 10% of the annual benefits derived from the system.

A systematic review of the cost of data collection for performance monitoring in hospitals.

PubMed

Jones, Cheryl; Gannon, Brenda; Wakai, Abel; O'Sullivan, Ronan

2015-04-01

Key performance indicators (KPIs) are used to identify where organisational performance is meeting desired standards and where performance requires improvement. Valid and reliable KPIs depend on the availability of high-quality data, specifically the relevant minimum data set ((MDS) the core data identified as the minimum required to measure performance for a KPI) elements. However, the feasibility of collecting the relevant MDS elements is always a limitation of performance monitoring using KPIs. Preferably, data should be integrated into service delivery, and, where additional data are required that are not currently collected as part of routine service delivery, there should be an economic evaluation to determine the cost of data collection. The aim of this systematic review was to synthesise the evidence base concerning the costs of data collection in hospitals for performance monitoring using KPI, and to identify hospital data collection systems that have proven to be cost minimising. We searched MEDLINE (1946 to May week 4 2014), Embase (1974 to May week 2 2014), and CINAHL (1937 to date). The database searches were supplemented by searching for grey literature through the OpenGrey database. Data was extracted, tabulated, and summarised as part of a narrative synthesis. The searches yielded a total of 1,135 publications. After assessing each identified study against specific inclusion exclusion criteria only eight studies were deemed as relevant for this review. The studies attempt to evaluate different types of data collection interventions including the installation of information communication technology (ICT), improvements to current ICT systems, and how different analysis techniques may be used to monitor performance. The evaluation methods used to measure the costs and benefits of data collection interventions are inconsistent across the identified literature. Overall, the results weakly indicate that collection of hospital data and improvements in data recording can be cost-saving. Given the limitations of this systematic review, it is difficult to conclude whether improvements in data collection systems can save money, increase quality of care, and assist performance monitoring of hospitals. With that said, the results are positive and suggest that data collection improvements may lead to cost savings and aid quality of care. PROSPERO CRD42014007450 .

Marginal cost curves for water footprint reduction in irrigated agriculture: a policy and decision making guide for efficient water use in crop production

NASA Astrophysics Data System (ADS)

Chukalla, Abebe; Krol, Maarten; Hoekstra, Arjen

2016-04-01

Reducing water footprints (WF) in irrigated crop production is an essential element in water management, particularly in water-scarce areas. To achieve this, policy and decision making need to be supported with information on marginal cost curves that rank measures to reduce the WF according to their cost-effectiveness and enable the estimation of the cost associated with a certain WF reduction target, e.g. towards a certain reasonable WF benchmark. This paper aims to develop marginal cost curves (MCC) for WF reduction. The AquaCrop model is used to explore the effect of different measures on evapotranspiration and crop yield and thus WF that is used as input in the MCC. Measures relate to three dimensions of management practices: irrigation techniques (furrow, sprinkler, drip and subsurface drip); irrigation strategies (full and deficit irrigation); and mulching practices (no mulching, organic and synthetic mulching). A WF benchmark per crop is calculated as resulting from the best-available production technology. The marginal cost curve is plotted using the ratios of the marginal cost to WF reduction of the measures as ordinate, ranking with marginal costs rise with the increase of the reduction effort. For each measure, the marginal cost to reduce WF is estimated by comparing the associated WF and net present value (NPV) to the reference case (furrow irrigation, full irrigation, no mulching). The NPV for each measure is based on its capital costs, operation and maintenances costs (O&M) and revenues. A range of cases is considered, including: different crops, soil types and different environments. Key words: marginal cost curve, water footprint benchmark, soil water balance, crop growth, AquaCrop

Estimation of the cost of using chemical protective clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwope, A.D.; Renard, E.R.

1993-01-01

The U.S. Environmental Protection Agency, either directly or through its Superfund contractors, is a major user of chemical protective clothing. The purpose of the study was to develop estimates for the cost of using this clothing. These estimates can be used to guide purchase decisions and use practices. For example, economic guidelines would assist in decisions pertinent to single-use versus reusable clothing. Eight cost elements were considered: (1) purchase cost, (2) the number of times an item is used, (3) the number of items used per day, (4) cost of decontamination, (5) cost of inspection, (6) cost of maintenance, (7)more » cost of storage, and (8) cost of disposal. Estimates or assumed inputs for each of these elements were developed based on labor costs, fixed costs, and recurring costs. The cost elements were combined into an economic (mathematical) model having the single output of cost/use. By comparing cost/use for various use scenarios, conclusions are readily reached as to the optimum economics for purchase, use, and reuse of the clothing. In general, clothing should be considered disposable if its purchase cost is less than its average cost/use per use for the anticipated number of times it will be reused.« less

Effectiveness of Multimedia Elements in Computer Supported Instruction: Analysis of Personalization Effects, Students' Performances and Costs

ERIC Educational Resources Information Center

Zaidel, Mark; Luo, XiaoHui

2010-01-01

This study investigates the efficiency of multimedia instruction at the college level by comparing the effectiveness of multimedia elements used in the computer supported learning with the cost of their preparation. Among the various technologies that advance learning, instructors and students generally identify interactive multimedia elements as…

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silverman, Gary S.; Bluhm, Martin; Coffey, James

2011-01-02

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exaserbated by export controls from China (one of the major sources ofmore » elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectonic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availablility of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology.« less

Wafer-level micro-optics: trends in manufacturing, testing, packaging, and applications

NASA Astrophysics Data System (ADS)

Voelkel, Reinhard; Gong, Li; Rieck, Juergen; Zheng, Alan

2012-11-01

Micro-optics is an indispensable key enabling technology (KET) for many products and applications today. Probably the most prestigious examples are the diffractive light shaping elements used in high-end DUV lithography steppers. Highly efficient refractive and diffractive micro-optical elements are used for precise beam and pupil shaping. Micro-optics had a major impact on the reduction of aberrations and diffraction effects in projection lithography, allowing a resolution enhancement from 250 nm to 45 nm within the last decade. Micro-optics also plays a decisive role in medical devices (endoscopes, ophthalmology), in all laser-based devices and fiber communication networks (supercomputer, ROADM), bringing high-speed internet to our homes (FTTH). Even our modern smart phones contain a variety of micro-optical elements. For example, LED flashlight shaping elements, the secondary camera, and ambient light and proximity sensors. Wherever light is involved, micro-optics offers the chance to further miniaturize a device, to improve its performance, or to reduce manufacturing and packaging costs. Wafer-scale micro-optics fabrication is based on technology established by semiconductor industry. Thousands of components are fabricated in parallel on a wafer. We report on the state of the art in wafer-based manufacturing, testing, packaging and present examples and applications for micro-optical components and systems.

Medea selfish genetic elements as tools for altering traits of wild populations: a theoretical analysis.

PubMed

Ward, Catherine M; Su, Jessica T; Huang, Yunxin; Lloyd, Alun L; Gould, Fred; Hay, Bruce A

2011-04-01

One strategy for controlling transmission of insect-borne disease involves replacing the native insect population with transgenic animals unable to transmit disease. Population replacement requires a drive mechanism to ensure the rapid spread of linked transgenes, the presence of which may result in a fitness cost to carriers. Medea selfish genetic elements have the feature that when present in a female, only offspring that inherit the element survive, a behavior that can lead to spread. Here, we derive equations that describe the conditions under which Medea elements with a fitness cost will spread, and the equilibrium allele frequencies are achieved. Of particular importance, we show that whenever Medea spreads, the non-Medea genotype is driven out of the population, and we estimate the number of generations required to achieve this goal for Medea elements with different fitness costs and male-only introduction frequencies. Finally, we characterize two contexts in which Medea elements with fitness costs drive the non-Medea allele from the population: an autosomal element in which not all Medea-bearing progeny of a Medea-bearing mother survive, and an X-linked element in species in which X/Y individuals are male. Our results suggest that Medea elements can drive population replacement under a wide range of conditions. © 2010 The Author(s). Evolution© 2010 The Society for the Study of Evolution.

Characterization of Kerfless Linear Arrays Based on PZT Thick Film.

PubMed

Zawada, Tomasz; Bierregaard, Louise Moller; Ringgaard, Erling; Xu, Ruichao; Guizzetti, Michele; Levassort, Franck; Certon, Dominique

2017-09-01

Multielement transducers enabling novel cost-effective fabrication of imaging arrays for medical applications have been presented earlier. Due to the favorable low lateral coupling of the screen-printed PZT, the elements can be defined by the top electrode pattern only, leading to a kerfless design with low crosstalk between the elements. The thick-film-based linear arrays have proved to be compatible with a commercial ultrasonic scanner and to support linear array beamforming as well as phased array beamforming. The main objective of the presented work is to investigate the performance of the devices at the transducer level by extensive measurements of the test structures. The arrays have been characterized by several different measurement techniques. First, electrical impedance measurements on several elements in air and liquid have been conducted in order to support material parameter identification using the Krimholtz-Leedom-Matthaei model. It has been found that electromechanical coupling is at the level of 35%. The arrays have also been characterized by a pulse-echo system. The measured sensitivity is around -60 dB, and the fractional bandwidth is close to 60%, while the center frequency is about 12 MHz over the whole array. Finally, laser interferometry measurements have been conducted indicating very good displacement level as well as pressure. The in-depth characterization of the array structure has given insight into the performance parameters for the array based on PZT thick film, and the obtained information will be used to optimize the key parameters for the next generation of cost-effective arrays based on piezoelectric thick film.

Process Cost Modeling for Multi-Disciplinary Design Optimization

NASA Technical Reports Server (NTRS)

Bao, Han P.; Freeman, William (Technical Monitor)

2002-01-01

For early design concepts, the conventional approach to cost is normally some kind of parametric weight-based cost model. There is now ample evidence that this approach can be misleading and inaccurate. By the nature of its development, a parametric cost model requires historical data and is valid only if the new design is analogous to those for which the model was derived. Advanced aerospace vehicles have no historical production data and are nowhere near the vehicles of the past. Using an existing weight-based cost model would only lead to errors and distortions of the true production cost. This report outlines the development of a process-based cost model in which the physical elements of the vehicle are costed according to a first-order dynamics model. This theoretical cost model, first advocated by early work at MIT, has been expanded to cover the basic structures of an advanced aerospace vehicle. Elemental costs based on the geometry of the design can be summed up to provide an overall estimation of the total production cost for a design configuration. This capability to directly link any design configuration to realistic cost estimation is a key requirement for high payoff MDO problems. Another important consideration in this report is the handling of part or product complexity. Here the concept of cost modulus is introduced to take into account variability due to different materials, sizes, shapes, precision of fabrication, and equipment requirements. The most important implication of the development of the proposed process-based cost model is that different design configurations can now be quickly related to their cost estimates in a seamless calculation process easily implemented on any spreadsheet tool. In successive sections, the report addresses the issues of cost modeling as follows. First, an introduction is presented to provide the background for the research work. Next, a quick review of cost estimation techniques is made with the intention to highlight their inappropriateness for what is really needed at the conceptual phase of the design process. The First-Order Process Velocity Cost Model (FOPV) is discussed at length in the next section. This is followed by an application of the FOPV cost model to a generic wing. For designs that have no precedence as far as acquisition costs are concerned, cost data derived from the FOPV cost model may not be accurate enough because of new requirements for shape complexity, material, equipment and precision/tolerance. The concept of Cost Modulus is introduced at this point to compensate for these new burdens on the basic processes. This is treated in section 5. The cost of a design must be conveniently linked to its CAD representation. The interfacing of CAD models and spreadsheets containing the cost equations is the subject of the next section, section 6. The last section of the report is a summary of the progress made so far, and the anticipated research work to be achieved in the future.

Critical Elements of Vehicle-to-Grid (V2G) Economics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steward, Darlene M.

This report explores the critical elements of V2G economics. Section 2 summarizes the elements and costs of a V2G system. Section 3 describes V2G revenue-generating services and the business cases for providing these services. Section 4 notes real-world V2G applications. Section 5 lists concerns related to V2G. Section 6 concludes and summarizes V2G cost and revenue elements.

Qualification and Reliability for MEMS and IC Packages

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2004-01-01

Advanced IC electronic packages are moving toward miniaturization from two key different approaches, front and back-end processes, each with their own challenges. Successful use of more of the back-end process front-end, e.g. microelectromechanical systems (MEMS) Wafer Level Package (WLP), enable reducing size and cost. Use of direct flip chip die is the most efficient approach if and when the issues of know good die and board/assembly are resolved. Wafer level package solve the issue of known good die by enabling package test, but it has its own limitation, e.g., the I/O limitation, additional cost, and reliability. From the back-end approach, system-in-a-package (SIAP/SIP) development is a response to an increasing demand for package and die integration of different functions into one unit to reduce size and cost and improve functionality. MEMS add another challenging dimension to electronic packaging since they include moving mechanical elements. Conventional qualification and reliability need to be modified and expanded in most cases in order to detect new unknown failures. This paper will review four standards that already released or being developed that specifically address the issues on qualification and reliability of assembled packages. Exposures to thermal cycles, monotonic bend test, mechanical shock and drop are covered in these specifications. Finally, mechanical and thermal cycle qualification data generated for MEMS accelerometer will be presented. The MEMS was an element of an inertial measurement unit (IMU) qualified for NASA Mars Exploration Rovers (MERs), Spirit and Opportunity that successfully is currently roaring the Martian surface

International casemix and funding models: lessons for rehabilitation.

PubMed

Turner-Stokes, Lynne; Sutch, Stephen; Dredge, Robert; Eagar, Kathy

2012-03-01

This series of articles for rehabilitation in practice aims to cover a knowledge element of the rehabilitation medicine curriculum. Nevertheless they are intended to be of interest to a multidisciplinary audience. The competency addressed in this article is 'An understanding of the different international models for funding of health care services and casemix systems, as exemplified by those in the US, Australia and the UK.' Payment for treatment in healthcare systems around the world is increasingly based on fixed tariff models to drive up efficiency and contain costs. Casemix classifications, however, must account adequately for the resource implications of varying case complexity. Rehabilitation poses some particular challenges for casemix development. The objectives of this educational narrative review are (a) to provide an overview of the development of casemix in rehabilitation, (b) to describe key characteristics of some well-established casemix and payment models in operation around the world and (c) to explore opportunities for future development arising from the lessons learned. Diagnosis alone does not adequately describe cost variation in rehabilitation. Functional dependency is considered a better cost indicator, and casemix classifications for inpatient rehabilitation in the United States and Australia rely on the Functional Independence Measure (FIM). Fixed episode-based prospective payment systems are shown to contain costs, but at the expense of poorer functional outcomes. More sophisticated models incorporating a mixture of episode and weighted per diem rates may offer greater flexibility to optimize outcome, while still providing incentive for throughput. The development of casemix in rehabilitation poses similar challenges for healthcare systems all around the world. Well-established casemix systems in the United States and Australia have afforded valuable lessons for other countries to learn from, but have not provided all the answers. A range of casemix and payment models is required to cater for different healthcare cultures, and casemix tools must capture all the key cost-determinants of treatment for patients with complex needs.

Photovoltaics: Energy for the New Millenium

NASA Astrophysics Data System (ADS)

Surek, Thomas

2000-04-01

Photovoltaics (PV) is a semiconductor-based technology that directly converts sunlight to electricity. The stimulus for terrestrial PV started more than 25 years ago in response to the oil crises of the 1970s, which resulted in major government programs in the United States, Europe, Japan, and elsewhere. Ongoing concerns with the global environment, as well as the worldwide efforts to seek alternate, indigenous sources of energy, continue to drive the investment in PV research and deployment. Today, the manufacture, sale, and use of PV has become a billion-dollar industry worldwide, with nearly 200 megawatts (MW) of PV modules shipped in 1999. The twenty five years of research and development led to the discovery of new PV materials, devices, and fabrication approaches; continuing improvements in the efficiency and reliability of solar cells and modules; and lower PV module and system costs. This talk reviews the rapid progress that has occurred in PV technology from the laboratory to the marketplace, including reviews of the leading technology options, status and issues, and key industry players. New processes for fabricating PV materials and devices, and innovative PV approaches with low-cost potential are elements of an ongoing research program aimed at future advancements in PV cost and performance While major market opportunities continue to exist in the developing countries, where sizable populations are without any electricity, today's manufacturing expansions are fueled by market initiatives for grid-connected PV in residential and commercial buildings. The combinations of increased production capacities, with the attendant cost reductions as a result of economies of scale, are expected to lead to sustainable markets. A key to achieving the ultimate potential of PV is to continue to increase the sunlight-to-electricity conversion efficiencies and translate the laboratory successes to cost-competitive products. Building a robust technology base is essential to overcoming this high-risk transition. Then PV will make a globally significant contribution to our energy supply and environment.

Continued investigation of solid propulsion economics. Task 1B: Large solid rocket motor case fabrication methods - Supplement process complexity factor cost technique

NASA Technical Reports Server (NTRS)

Baird, J.

1967-01-01

This supplement to Task lB-Large Solid Rocket Motor Case Fabrication Methods supplies additional supporting cost data and discusses in detail the methodology that was applied to the task. For the case elements studied, the cost was found to be directly proportional to the Process Complexity Factor (PCF). The PCF was obtained for each element by identifying unit processes that are common to the elements and their alternative manufacturing routes, by assigning a weight to each unit process, and by summing the weighted counts. In three instances of actual manufacture, the actual cost per pound equaled the cost estimate based on PCF per pound, but this supplement, recognizes that the methodology is of limited, rather than general, application.

Key challenges and recent progress in batteries, fuel cells, and hydrogen storage for clean energy systems

NASA Astrophysics Data System (ADS)

Chalk, Steven G.; Miller, James F.

Reducing or eliminating the dependency on petroleum of transportation systems is a major element of US energy research activities. Batteries are a key enabling technology for the development of clean, fuel-efficient vehicles and are key to making today's hybrid electric vehicles a success. Fuel cells are the key enabling technology for a future hydrogen economy and have the potential to revolutionize the way we power our nations, offering cleaner, more efficient alternatives to today's technology. Additionally fuel cells are significantly more energy efficient than combustion-based power generation technologies. Fuel cells are projected to have energy efficiency twice that of internal combustion engines. However before fuel cells can realize their potential, significant challenges remain. The two most important are cost and durability for both automotive and stationary applications. Recent electrocatalyst developments have shown that Pt alloy catalysts have increased activity and greater durability than Pt catalysts. The durability of conventional fluorocarbon membranes is improving, and hydrocarbon-based membranes have also shown promise of equaling the performance of fluorocarbon membranes at lower cost. Recent announcements have also provided indications that fuel cells can start from freezing conditions without significant deterioration. Hydrogen storage systems for vehicles are inadequate to meet customer driving range expectations (>300 miles or 500 km) without intrusion into vehicle cargo or passenger space. The United States Department of Energy has established three centers of Excellence for hydrogen storage materials development. The centers are focused on complex metal hydrides that can be regenerated onboard a vehicle, chemical hydrides that require off-board reprocessing, and carbon-based storage materials. Recent developments have shown progress toward the 2010 DOE targets. In addition DOE has established an independent storage material testing center to verify storage capacity of promising materials. These developments point to a viable path to achieving the DOE/FreedomCAR cost and performance goals. The transition to hydrogen-powered fuel cell vehicles will occur over the next 10-15 years. In the interim, fossil fuel consumption will be reduced by increased penetration of battery/gasoline hybrid cars.

Preparing Our Schools for the 21st Century. 1999 ASCD Yearbook.

ERIC Educational Resources Information Center

Marsh, David D., Ed.

This yearbook offers a view of the key elements of schooling in the 21st century, outlining the nature of the change process that will be needed to create such schools. These key elements are drawn from the experience of educational reform in several countries and reflect a growing consensus about which elements will help all schools achieve both…

A quantitative metric to identify critical elements within seafood supply networks.

PubMed

Plagányi, Éva E; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

A Quantitative Metric to Identify Critical Elements within Seafood Supply Networks

PubMed Central

Plagányi, Éva E.; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J.; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H.; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical. PMID:24633147

Wide-area situation awareness in electric power grid

NASA Astrophysics Data System (ADS)

Greitzer, Frank L.

2010-04-01

Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

The dome-shaped Fresnel-Köhler concentrator

NASA Astrophysics Data System (ADS)

Zamora, P.; Benitez, P.; Li, Y.; Miñano, J. C.; Mendes-Lopes, J.; Araki, K.

2012-10-01

Manufacturing tolerances, along with a high concentration ratio, are key issues in order to obtain cheap CPV systems for mass production. Consequently, this manuscript presents a novel tolerant and cost effective concentrator optic: the domed-shaped Fresnel-Köhler, presenting a curved Fresnel lens as Primary Optical Element (POE). This concentrator is based on two previous successful CPV designs: the FK concentrator, based on a flat Fresnel lens, and the dome-shaped Fresnel lens system developed by Daido Steel, resulting on a superior concentrator. The manuscript shows outstanding simulation results for geometrical concentration factor of Cg = 1,230x: high tolerance and high optical efficiency, achieving acceptance angles of 1.18° (dealing to a CAP*=0.72) and efficiencies over 85% (without any anti-reflective coating). Moreover, Köhler integration provides good irradiance uniformity on the cell surface without increasing system complexity by means of any extra element. Daido Steel advanced technique for demolding injected plastic pieces will allow for easy manufacture of the dome-shaped POE of DFK concentrator.

How Many Words Does a Picture Really Tell? Cross-sectional Descriptive Study of Pictogram Evaluation by Youth.

PubMed

Korenevsky, Artyom; Vaillancourt, Régis; Pouliot, Annie; Revol, Marine; Steed, Evan; Besançon, Luc; Wahrendorf, Marit-Saskia; Patel, Jaimisha R

2013-07-01

Communicating health-related instructions with pictograms is useful, but such graphics can be interpreted in different ways. It is crucial to understand which pictogram components are best for accurate communication. To catalogue pictograms used to label drugs in clinical practice; to identify the common graphic elements for defined categories of pictograms, by performing a semiotic analysis (studying how signs are perceived and how they should be designed); to identify the key graphic elements common to pictograms preferred by users; and to develop suggestions for future pictogram design on the basis of users' input. Literature and Internet searches were performed to identify pictograms and pictogram categories. A call for pictograms was also circulated through the International Pharmaceutical Federation (FIP). Youth at a Canadian pediatric hospital were asked to rate pictograms (including storyboards and prescription labels generated by FIP pictogram software) in terms of how best they represented their intended meanings. Pictograms for which at least 80% of participants "somewhat agreed", "agreed", or "strongly agreed" that the graphic conveyed the intended meaning were designated as "preferred" and were selected for analysis. Elements appearing in at least 50% of these preferred pictograms were highlighted as key graphic elements for design of future pictograms. In total, 21 categories were identified for pictograms used in clinical practice, and a total of 204 pictograms were analyzed. Eighty-six participants took part in the survey. For each pictogram category, certain elements were identified as "preferred" and as "key graphic elements", whereas other elements met neither designation. For all 21 pictogram categories, at least 80% of survey respondents agreed that the FIP storyboard conveyed the intended meaning. Certain key, preferred graphic elements are required for pharmaceutical pictograms to convey their intended meaning. The overlap between preferred and key pictogram elements indicates that both must be considered in development of future pictograms. Redesign of existing pictograms with consideration of the best semiotic elements is in progress.

Evidence for more cost-effective surveillance options for bovine spongiform encephalopathy (BSE) and scrapie in Great Britain.

PubMed

Wall, Ben A; Arnold, Mark E; Radia, Devi; Gilbert, Will; Ortiz-Pelaez, Angel; Stärk, Katharina Dc; Van Klink, Ed; Guitian, Javier

2017-08-10

Transmissible spongiform encephalopathies (TSEs) are an important public health concern. Since the emergence of bovine spongiform encephalopathy (BSE) during the 1980s and its link with human Creutzfeldt-Jakob disease, active surveillance has been a key element of the European Union's TSE control strategy. Success of this strategy means that now, very few cases are detected compared with the number of animals tested. Refining surveillance strategies would enable resources to be redirected towards other public health priorities. Cost-effectiveness analysis was performed on several alternative strategies involving reducing the number of animals tested for BSE and scrapie in Great Britain and, for scrapie, varying the ratio of sheep sampled in the abattoir to fallen stock (which died on the farm). The most cost-effective strategy modelled for BSE involved reducing the proportion of fallen stock tested from 100% to 75%, producing a cost saving of ca GBP 700,000 per annum. If 50% of fallen stock were tested, a saving of ca GBP 1.4 million per annum could be achieved. However, these reductions are predicted to increase the period before surveillance can detect an outbreak. For scrapie, reducing the proportion of abattoir samples was the most cost-effective strategy modelled, with limited impact on surveillance effectiveness. This article is copyright of The Authors, 2017.

Stanol esters as a component of maximal dietary therapy in the National Cholesterol Education Program Adult Treatment Panel III report.

PubMed

Grundy, Scott M

2005-07-04

Use of plant stanols/sterols in forms that are sufficiently bioavailable for therapeutic effect should be a key element of maximal dietary therapy. This principle was recognized by National Cholesterol Education Program (NCEP) Adult Treatment Panel III (ATP III) and has been amply confirmed by experimental studies in humans. Since the introduction of statins, dietary therapy for control of elevated low-density lipoprotein (LDL) cholesterol levels has received less attention. The time has come, however, to reassert the importance of maximal dietary therapy as a cost-effective means for treatment of elevated LDL concentrations and for lifetime prevention of coronary heart disease.

Activity-based funding model provides foundation for province-wide best practices in renal care.

PubMed

Levin, Adeera; Lo, Clifford; Noel, Kevin; Djurdjev, Ogjnenka; Amano, Erlyn C

2013-01-01

British Columbia has a unique funding model for renal care in Canada. Patient care is delivered through six health authorities, while funding is administered by the Provincial Renal Agency using an activity-based funding model. The model allocates funding based on a schedule of costs for every element of renal care, excluding physician fees. Accountability, transparency of allocation and tracking of outcomes are key features that ensure successful implementation. The model supports province-wide best practices and equitable care and fosters innovation. Since its introduction, the outpatient renal services budget has grown less than the population, while maintaining or improving clinical outcomes. Copyright © 2013 Longwoods Publishing.

Making the Case for Reusable Booster Systems: The Operations Perspective

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2012-01-01

Presentation to the Aeronautics Space Engineering Board National Research Council Reusable Booster System: Review and Assessment Committee. Addresses: the criteria and assumptions used in the formulation of current RBS plans; the methodologies used in the current cost estimates for RBS; the modeling methodology used to frame the business case for an RBS capability including: the data used in the analysis, the models' robustness if new data become available, and the impact of unclassified government data that was previously unavailable and which will be supplied by the USAF; the technical maturity of key elements critical to RBS implementation and the ability of current technology development plans to meet technical readiness milestones.

The evolving role of health care organizations in research.

PubMed

Tuttle, W C; Piland, N F; Smith, H L

1988-01-01

Many hospitals and health care organizations are contending with fierce financial and competitive pressures. Consequently, programs that do not make an immediate contribution to master strategy are often overlooked in the strategic management process. Research programs are a case in point. Basic science, clinical, and health services research programs may help to create a comprehensive and fundamentally sound master strategy. This article discusses the evolving role of health care organizations in research relative to strategy formulation. The primary costs and benefits from participating in research programs are examined. An agenda of questions is presented to help health care organizations determine whether they should incorporate health-related research as a key element in their strategy.

UltraSensitive Mycotoxin Detection by STING Sensors

PubMed Central

Actis, Paolo; Jejelowo, Olufisayo; Pourmand, Nader

2010-01-01

Signal Transduction by Ion Nano Gating (STING) technology is a label-free biosensor capable of identifying DNA and proteins. Based on a functionalized quartz nanopipette, the STING sensor includes specific recognition elements for analyte discrimination based on size, shape and charge density. A key feature of this technology is that it doesn't require any nanofabrication facility; each nanopipette can be easily, reproducibly, and inexpensively fabricated and tailored at the bench, thus reducing the cost and the turnaround time. Here, we show that STING sensors are capable of the ultrasensitive detection of HT-2 toxin with a detection limit of 100 fg/ml and compare the STING capabilities with respect to conventional sandwich assay techniques. PMID:20829024

The economics of cardiac biomarker testing in suspected myocardial infarction.

PubMed

Goodacre, Steve; Thokala, Praveen

2015-03-01

Suspected myocardial infarction (MI) is a common reason for emergency hospital attendance and admission. Cardiac biomarker measurement is an essential element of diagnostic assessment of suspected MI. Although the cost of a routinely available biomarker may be small, the large patient population and consequences in terms of hospital admission and investigation mean that the economic impact of cardiac biomarker testing is substantial. Economic evaluation involves comparing the estimated costs and effectiveness (outcomes) of two or more interventions or care alternatives. This process creates some difficulties with respect to cardiac biomarkers. Estimating the effectiveness of cardiac biomarkers involves identifying how they help to improve health and how we can measure this improvement. Comparison to an appropriate alternative is also problematic. New biomarkers may be promoted on the basis of reducing hospital admission or length of stay, but hospital admission for low risk patients may incur significant costs while providing very little benefit, making it an inappropriate comparator. Finally, economic evaluation may conclude that a more sensitive biomarker strategy is more effective but, by detecting and treating more cases, is also more expensive. In these circumstances it is unclear whether we should use the more effective or the cheaper option. This article provides an introduction to health economics and addresses the specific issues relevant to cardiac biomarkers. It describes the key concepts relevant to economic evaluation of cardiac biomarkers in suspected MI and highlights key areas of uncertainty and controversy. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Taking Proof based Verified Computation a Few Steps Closer to Practicality (extended version)

DTIC Science & Technology

2012-06-27

general s2 + s, in general V’s per-instance CPU costs Issue commit queries (e + 2c) · n/β (e + 2c) · n/β Process commit responses d d Issue PCP...size (# of instances) (§2.3) e: cost of encrypting an element in F d : cost of decrypting an encrypted element f : cost of multiplying in F h: cost of...domain D (such as the integers, Z, or the rationals, Q) to equivalent constraints over a finite field, the programmer or compiler performs 3We suspect

A New Approach to Design of an optimized Grid Tied Smart Solar Photovoltaic (PV) System

NASA Astrophysics Data System (ADS)

Farhad, M. Mehedi; Ali, M. Mohammad; Iqbal, M. Asif; Islam, N. Nahar; Ashraf, N.

2012-11-01

Energy is the key element for the economical development of a country. With the increasing concern about the global demand for Renewable Energy (RE) energy, it is very much important to reduce the cost of the whole solar photovoltaic (PV) system. Still now most of the solar photovoltaic (PV) system is highly expensive. In this paper we have shown that grid tied solar system can be developed by omitting the energy storage device like large capacity battery bank. It will not only reduce the internallosses for charging and discharging of battery bank but also at the same time a large amount of cost of the battery will be reduced. So, the system maintenance cost will be reduced also. We have proposed a new approach to design a photovoltaic (PV) solar power system which can be operated by feeding the solar power to the national grid along with the residential load. Again if there is an extra power demand for residential load along with the solar power then this system can also provide an opportunity to consume the power from the national grid. The total system is controlled with the help of some the sensors and a microcontroller. As a whole a significant reduction in the system costs and efficient system performance can be realized.

Development of decision- making mechanism in engineering design of phased coal mines technical upgrade

NASA Astrophysics Data System (ADS)

Kulak, V. Yu; Petrova, T. V.; Novichikhin, A. V.

2017-09-01

The approach to a choice of a new mine design and technical upgrade of operating coal mines is substantiated. The choice of the option is made in the following way: the elements of the mine technological system are defined, for each element of the system two levels of costs are allocated - capital and operational; a graph of alternative options of the system is formed by matrix enumeration taking into account the possibility of simultaneous application of different elements, up to 10 000 scenarios are formed; capital and operating costs of options are estimated in the form of coefficients as the cost-to-cost ratio in the base variant, which has already been implemented and the costs of which are already known; ranking of the options at the level of costs and the definition of the 10 preferred are performed. It is established that the application of partial enumeration allows the costs relative to the base variant to be reduced by 10 %; the main constraint of costs reduction is the need to comply with all conditions that ensure industrial safety.

Design and fabrication of microstrip antenna arrays

NASA Technical Reports Server (NTRS)

1978-01-01

A microstrip array project was conducted to demonstrate the feasibility of designing and fabricating simple, low cost, low sidelobe phased arrays with circular disk microstrip radiating elements. Design data were presented for microstrip elements and arrays including the effects of the protective covers, the mutual interaction between elements, and stripline feed network design. Low cost multilayer laminate fabrication techniques were also investigated. Utilizing this design data two C-band low sidelobe arrays were fabricated and tested: an eight-element linear and a sixty-four element planar array. These arrays incorporated stripline Butler matrix feed networks to produce a low sidelobe broadside beam.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, S. H.; Yang, B. X.; Collins, J. T.

Accurate and stable x-ray beam position monitors (XBPMs) are key elements in obtaining the desired user beam stability in the Advanced Photon Source Upgrade. In the next-generation XBPMs for the canted-undulator front ends, where two undulator beams are separated by 1.0 mrad, the lower beam power (<10 kW) per undulator allows us to explore lower-cost solutions based on Compton scattering from a diamond placed edge-on to the x-ray beam. Because of the high peak power density of the x-ray beams, this diamond experiences high temperatures and has to be clamped to a water-cooled heat spreader using thermal interface materials (TIMs),more » which play a key role in reducing the temperature of the diamond. To evaluate temperature changes through the interface via thermal simulations, the thermal contact resistance (TCR) of TIMs at an interface between two solid materials under even contact pressure must be known. This paper addresses the TCR measurements of several TIMs, including gold, silver, pyrolytic graphite sheet, and 3D graphene foam. In addition, a prototype of a Compton-scattering XBPM with diamond blades was installed at APS Beamline 24-ID-A in May 2015 and has been tested. This study presents the design of the Compton-scattering XBPM, and compares thermal simulation results obtained for the diamond blade of this XBPM by the finite element method with in situ empirical measurements obtained by using reliable infrared technology.« less

Reforming Central Government Health Scheme into a 'Universal Health Coverage' model.

PubMed

Sarwal, Rakesh

2015-01-01

Universal Health Coverage (UHC) is now recognized as a goal of all health systems, irrespective of income levels. In the absence of a one-size solution, each country has to develop strategies suited to its circumstances. How does the Central Government Health Scheme (CGHS) stand up to the goals and global experience of UHC, and what can be done to make it a model? I relied on publicly available documents to identify key features of UHC, and relate it to the architecture of and practices in CGHS. Combining WHO's framework of health systems functions with log frame approach, I constructed a 'UHC status tool' of key elements and expected norms of UHC. CGHS has been performing strongly on financing function and for the range of services covered. It has performed rather poorly on all other elements of UHC. I build the argument for continued public provision of health, as opposed to insurance, on grounds of cost, public good nature of outpatient care and public health services. I suggest and strategize a sequence of reforms in CGHS anchored in health system strengthening, governance and financing, comprehensive primary care and client participation. It is both possible and desirable to transform CGHS into a UHC model within the same fiscal space. Merger of finance pools of centrally administered health schemes is suggested as a step towards UHC in India. Copyright 2015, NMJI.

Chapter 6 - Lichen species to bioindicate air quality in Eastern United States from elemental composition: lessons from the Midwest

Treesearch

Susan Will-Wolf; Sarah Jovan; Michael C. Amacher

2018-01-01

Elemental concentration in lichens is a popular and cost-effective tool to bioindicate pollution load at plots (Donovan and others2016, Paoli and others 2014, Root and others 2015) and to complement costly instrumented monitoring to help assess environmental health. From recent development of lichen elemental bioindicators for air pollution in the U.S....

The Affordable Care Act, Accountable Care Organizations, and Mental Health Care for Older Adults: Implications and Opportunities.

PubMed

Bartels, Stephen J; Gill, Lydia; Naslund, John A

2015-01-01

The Patient Protection and Affordable Care Act (ACA) represents the most significant legislative change in the United States health care system in nearly half a century. Key elements of the ACA include reforms aimed at addressing high-cost, complex, vulnerable patient populations. Older adults with mental health disorders are a rapidly growing segment of the population and are among the most challenging subgroups within health care, and they account for a disproportionate amount of costs. What does the ACA mean for geriatric mental health? We address this question by highlighting opportunities for reaching older adults with mental health disorders by leveraging the diverse elements of the ACA. We describe nine relevant initiatives: (1) accountable care organizations, (2) patient-centered medical homes, (3) Medicaid-financed specialty health homes, (4) hospital readmission and health care transitions initiatives, (5) Medicare annual wellness visit, (6) quality standards and associated incentives, (7) support for health information technology and telehealth, (8) Independence at Home and 1915(i) State Plan Home and Community-Based Services program, and (9) Medicare-Medicaid Coordination Office, Center for Medicare and Medicaid Innovation, and the Patient-Centered Outcomes Research Institute. We also consider potential challenges to full implementation of the ACA and discuss novel solutions for advancing geriatric mental health in the context of projected workforce shortages and the opportunities afforded by the ACA.

Transient heating of expressed breast milk up to 65°C inactivates HIV-1 in milk: a simple, rapid, and cost-effective method to prevent postnatal transmission.

PubMed

Hoque, Sheikh Ariful; Hoshino, Hiroo; Anwar, Kazi Selim; Tanaka, Atsushi; Shinagawa, Masahiko; Hayakawa, Yuko; Okitsu, Shoko; Wada, Yuichi; Ushijima, Hiroshi

2013-02-01

The postnatal transmission of human immunodeficiency virus (HIV) from mothers to children occurs through breastfeeding. Although heat treatment of expressed breast milk is a promising approach to make breastfeeding safer, it is still not popular, mainly because the recommended procedures are difficult to follow, or time-consuming, or because mothers do not know which temperature is sufficient to inactivate HIV without destroying the nutritional elements of milk. To overcome these drawbacks, a simple and rapid method of heat treatment that a mother could perform with regular household materials applying her day-to-day art of cooking was examined. This structured experiment has demonstrated that both cell-free and cell-associated HIV type 1 (HIV-1) in expressed breast milk could be inactivated once the temperature of milk reached 65°C. Furthermore, a heating method as simple as heating the milk in a pan over a stove to 65°C inhibited HIV-1 transmission retaining milk's nutritional key elements, for example, total protein, IgG, IgA, and vitamin B(12) . This study has highlighted a simple, handy, and cost-effective method of heat treatment of expressed breast milk that mothers infected with HIV could apply easily and with more confidence. Copyright © 2012 Wiley Periodicals, Inc.

The Affordable Care Act, Accountable Care Organizations, and Mental Health Care for Older Adults: Implications and Opportunities

PubMed Central

Bartels, Stephen J.; Gill, Lydia; Naslund, John A.

2015-01-01

Abstract The Patient Protection and Affordable Care Act (ACA) represents the most significant legislative change in the United States health care system in nearly half a century. Key elements of the ACA include reforms aimed at addressing high-cost, complex, vulnerable patient populations. Older adults with mental health disorders are a rapidly growing segment of the population and are among the most challenging subgroups within health care, and they account for a disproportionate amount of costs. What does the ACA mean for geriatric mental health? We address this question by highlighting opportunities for reaching older adults with mental health disorders by leveraging the diverse elements of the ACA. We describe nine relevant initiatives: (1) accountable care organizations, (2) patient-centered medical homes, (3) Medicaid-financed specialty health homes, (4) hospital readmission and health care transitions initiatives, (5) Medicare annual wellness visit, (6) quality standards and associated incentives, (7) support for health information technology and telehealth, (8) Independence at Home and 1915(i) State Plan Home and Community-Based Services program, and (9) Medicare-Medicaid Coordination Office, Center for Medicare and Medicaid Innovation, and the Patient-Centered Outcomes Research Institute. We also consider potential challenges to full implementation of the ACA and discuss novel solutions for advancing geriatric mental health in the context of projected workforce shortages and the opportunities afforded by the ACA. PMID:25811340

Monolithic Cu-Cr-Nb Alloys for High Temperature, High Heat Flux Applications

NASA Technical Reports Server (NTRS)

Ellis, David L.; Locci, Ivan E.; Michal, Gary M.; Humphrey, Derek M.

1999-01-01

Work during the prior four years of this grant has resulted in significant advances in the development of Cu-8 Cr4 Nb and related Cu-Cr-Nb alloys. The alloys are nearing commercial use in the Reusable Launch Vehicle (RLV) where they are candidate materials for the thrust cell liners of the aerospike engines being developed by Rocketdyne. During the fifth and final year of the grant, it is proposed to complete development of the design level database of mechanical and thermophysical properties and transfer it to NASA Glenn Research Center and Rocketdyne. The database development work will be divided into three main areas: Thermophysical Database Augmentation, Mechanical Testing and Metallography and Fractography. In addition to the database development, work will continue that is focussed on the production of alternatives to the powder metallurgy alloys currently used. Exploration of alternative alloys will be aimed at both the development of lower cost materials and higher performance materials. A key element of this effort will be the use of Thermo-Calc software to survey the solubility behavior of a wide range of alloying elements in a copper matrix. The ultimate goals would be to define suitable alloy compositions and processing routes to produce thin sheets of the material at either a lower cost, or, with improved mechanical and thermal properties compared to the current Cu-Cr-Nb powder metallurgy alloys.

DNA-nanostructure-assembly by sequential spotting

PubMed Central

2011-01-01

Background The ability to create nanostructures with biomolecules is one of the key elements in nanobiotechnology. One of the problems is the expensive and mostly custom made equipment which is needed for their development. We intended to reduce material costs and aimed at miniaturization of the necessary tools that are essential for nanofabrication. Thus we combined the capabilities of molecular ink lithography with DNA-self-assembling capabilities to arrange DNA in an independent array which allows addressing molecules in nanoscale dimensions. Results For the construction of DNA based nanostructures a method is presented that allows an arrangement of DNA strands in such a way that they can form a grid that only depends on the spotted pattern of the anchor molecules. An atomic force microscope (AFM) has been used for molecular ink lithography to generate small spots. The sequential spotting process allows the immobilization of several different functional biomolecules with a single AFM-tip. This grid which delivers specific addresses for the prepared DNA-strand serves as a two-dimensional anchor to arrange the sequence according to the pattern. Once the DNA-nanoarray has been formed, it can be functionalized by PNA (peptide nucleic acid) to incorporate advanced structures. Conclusions The production of DNA-nanoarrays is a promising task for nanobiotechnology. The described method allows convenient and low cost preparation of nanoarrays. PNA can be used for complex functionalization purposes as well as a structural element. PMID:22099392

Using two MEMS deformable mirrors in an adaptive optics test bed for multiconjugate correction

NASA Astrophysics Data System (ADS)

Andrews, Jonathan R.; Martinez, Ty; Teare, Scott W.; Restaino, Sergio R.; Wilcox, Christopher C.; Santiago, Freddie; Payne, Don M.

2010-02-01

Adaptive optics systems have advanced considerably over the past decade and have become common tools for optical engineers. The most recent advances in adaptive optics technology have lead to significant reductions in the cost of most of the key components. Most significantly, the cost of deformable elements and wavefront sensor components have dropped to the point where multiple deformable mirrors and Shack- Hartmann array based wavefront sensor cameras can be included in a single system. Matched with the appropriate hardware and software, formidable systems can be operating in nearly any sized research laboratory. The significant advancement of MEMS deformable mirrors has made them very popular for use as the active corrective element in multi-conjugate adaptive optics systems so that, in particular for astronomical applications, this allows correction in more than one plane. The NRL compact AO system and atmospheric simulation systems has now been expanded to support Multi Conjugate Adaptive Optics (MCAO), taking advantage of using the liquid crystal spatial light modulator (SLM) driven aberration generators in two conjugate planes that are well separated spatially. Thus, by using two SLM based aberration generators and two separate wavefront sensors, the system can measure and apply wavefront correction with two MEMS deformable mirrors. This paper describes the multi-conjugate adaptive optics system and the testing and calibration of the system and demonstrates preliminary results with this system.

Developing IT Infrastructure for Rural Hospitals: A Case Study of Benefits and Challenges of Hospital-to-Hospital Partnerships.

PubMed

Reddy, Madhu C; Purao, Sandeep; Kelly, Mary

2008-01-01

This article presents a study identifying benefits and challenges of a novel hospital-to-hospital information technology (IT) outsourcing partnership (HHP). The partnership is an innovative response to the problem that many smaller, rural hospitals face: to modernize their IT infrastructure in spite of a severe shortage of resources. The investigators studied three rural hospitals that outsourced their IT infrastructure, through an HHP, to a larger, more technologically advanced hospital in the region. The study design was based on purposive sampling and interviews of senior managers from the four hospitals. The results highlight the HHP's benefits and challenges from both the rural hospitals' and vendor hospital's perspectives. The HHP was considered a success: a key outcome was that it has improved the rural hospitals' IT infrastructure at an affordable cost. The investigators discuss key elements for creating a successful HHP and offer preliminary answers to the question of what it takes for an HHP to be successful.

Better Care Teams: A Stepwise Skill Reinforcement Model.

PubMed

Christopher, Beth-Anne; Grantner, Mary; Coke, Lola A; Wideman, Marilyn; Kwakwa, Francis

2016-06-01

The Building Healthy Urban Communities initiative presents a path for organizations partnering to improve patient outcomes with continuing education (CE) as a key component. Components of the CE initiative included traditional CE delivery formats with an essential element of adaptability and new methods, with rigorous evaluation over time that included evaluation prior to the course, immediately following the CE session, 6 to 8 weeks after the CE session, and then subsequent monthly "testlets." Outcome measures were designed to allow for ongoing adaptation of content, reinforcement of key learning objectives, and use of innovative concordant testing and retrieval practice techniques. The results after 1 year of programming suggest the stepwise skill reinforcement model is effective for learning and is an efficient use of financial and human resources. More important, its design is one that could be adopted at low cost by organizations willing to work in close partnership. J Contin Educ Nurs. 2016;47(6):283-288. Copyright 2016, SLACK Incorporated.

My Forty-Year Adventure in the Wonderful World of Fiber Optics!

NASA Astrophysics Data System (ADS)

Hodara, Henri

2016-11-01

In the first part of this presentation, I review the key technology developments of the last century up to the present. These developments are what led us to the communication and information revolution. This is followed by a discussion of how the use of optical fibers brought about the fusion of these two elements and the resultant proliferation of smart phones and social networks. In the second part, I recollect some of my work in fiber optics over a period of forty years in the context of those key developments. In particular, I stress what it takes for a company small in comparison to the giants in the field to capture niche markets. I also discuss the criteria that are needed to justify the application of a new technology like optical fibers to existing communication and sensing systems, and make it cost effective. I end this presentation with a few personal considerations regarding technology developments and innovation.

Developing IT Infrastructure for Rural Hospitals: A Case Study of Benefits and Challenges of Hospital-to-Hospital Partnerships

PubMed Central

Reddy, Madhu C.; Purao, Sandeep; Kelly, Mary

2008-01-01

This article presents a study identifying benefits and challenges of a novel hospital-to-hospital information technology (IT) outsourcing partnership (HHP). The partnership is an innovative response to the problem that many smaller, rural hospitals face: to modernize their IT infrastructure in spite of a severe shortage of resources. The investigators studied three rural hospitals that outsourced their IT infrastructure, through an HHP, to a larger, more technologically advanced hospital in the region. The study design was based on purposive sampling and interviews of senior managers from the four hospitals. The results highlight the HHP's benefits and challenges from both the rural hospitals' and vendor hospital's perspectives. The HHP was considered a success: a key outcome was that it has improved the rural hospitals' IT infrastructure at an affordable cost. The investigators discuss key elements for creating a successful HHP and offer preliminary answers to the question of what it takes for an HHP to be successful. PMID:18436901

A modified oxic-settling-anaerobic activated sludge process using gravity thickening for excess sludge reduction

NASA Astrophysics Data System (ADS)

Wang, Jun; Li, Shi-Yu; Jiang, Feng; Wu, Ke; Liu, Guang-Li; Lu, Hui; Chen, Guang-Hao

2015-09-01

Oxic-settling-anaerobic process (OSA) was known as a cost-effective way to reduce the excess sludge production with simple upgrade of conventional activated sludge process (CAS). A low oxidation-reduction potential (ORP) level was the key factor to sludge decay and lysis in the sludge holding tank of the OSA process. However, the ORP control with nitrogen purge or chemical dosing in the OSA process would induce extra expense and complicate the operation. Hence, in this study, a sludge holding tank using gravity thickening was applied to OSA process to reduce the excess sludge production without any ORP control. Results showed that the modified OSA process not only reduced the excess sludge production effectively but also improved the sludge settleability without affected the treatment capacity. The reduction of the excess sludge production in the modified OSA process resulted from interactions among lots of factors. The key element of the process was the gravity thickening sludge holding tank.

Gene Therapy in Heart Failure.

PubMed

Fargnoli, Anthony S; Katz, Michael G; Bridges, Charles R; Hajjar, Roger J

2017-01-01

Heart failure is a significant burden to the global healthcare system and represents an underserved market for new pharmacologic strategies, especially therapies which can address root cause myocyte dysfunction. Modern drugs, surgeries, and state-of-the-art interventions are costly and do not improve survival outcome measures. Gene therapy is an attractive strategy, whereby selected gene targets and their associated regulatory mechanisms can be permanently managed therapeutically in a single treatment. This in theory could be sustainable for the patient's life. Despite the promise, however, gene therapy has numerous challenges that must be addressed together as a treatment plan comprising these key elements: myocyte physiologic target validation, gene target manipulation strategy, vector selection for the correct level of manipulation, and carefully utilizing an efficient delivery route that can be implemented in the clinic to efficiently transfer the therapy within safety limits. This chapter summarizes the key developments in cardiac gene therapy from the perspective of understanding each of these components of the treatment plan. The latest pharmacologic gene targets, gene therapy vectors, delivery routes, and strategies are reviewed.

Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review

NASA Astrophysics Data System (ADS)

Feuerstein, Albert; Knapp, James; Taylor, Thomas; Ashary, Adil; Bolcavage, Ann; Hitchman, Neil

2008-06-01

The most advanced thermal barrier coating (TBC) systems for aircraft engine and power generation hot section components consist of electron beam physical vapor deposition (EBPVD) applied yttria-stabilized zirconia and platinum modified diffusion aluminide bond coating. Thermally sprayed ceramic and MCrAlY bond coatings, however, are still used extensively for combustors and power generation blades and vanes. This article highlights the key features of plasma spray and HVOF, diffusion aluminizing, and EBPVD coating processes. The coating characteristics of thermally sprayed MCrAlY bond coat as well as low density and dense vertically cracked (DVC) Zircoat TBC are described. Essential features of a typical EBPVD TBC coating system, consisting of a diffusion aluminide and a columnar TBC, are also presented. The major coating cost elements such as material, equipment and processing are explained for the different technologies, with a performance and cost comparison given for selected examples.

A market approach to better care at lower cost.

PubMed

Antos, Joseph

2015-11-01

The Affordable Care Act expanded health insurance coverage in the United States but did little to address the structural problems that plague the U.S. health care system. Controlling cost while maintaining or improving access to quality care requires a more fundamental reform based on market principles. Such an approach means aligning the financial incentives of patients and providers to promote smarter spending. It also requires better information and more flexible regulation to promote well-functioning competitive markets. Key elements of these reforms include setting reasonable limits on subsidies for Medicare, Medicaid, and private health insurance; modernizing the Medicare program and adopting reforms that promote competition between traditional Medicare and Medicare Advantage; allowing greater flexibility for states in running their Medicaid programs; enacting smarter regulations to protect consumers without imposing greater inefficiency on the health market; and promoting more direct consumer involvement in all phases of their health and health care. These changes will challenge academic medical centers as a new era of creativity and competition emerges in the health care market.

Advanced Data Acquisition Systems with Self-Healing Circuitry

NASA Technical Reports Server (NTRS)

Larson, William E.; Ihlefeld, Curtis M.; Medelius, Pedro J.; Delgado, H. (Technical Monitor)

2001-01-01

Kennedy Space Center's Spaceport Engineering & Technology Directorate has developed a data acquisition system that will help drive down the cost of ground launch operations. This system automates both the physical measurement set-up function as well as configuration management documentation. The key element of the system is a self-configuring, self-calibrating, signal-conditioning amplifier that automatically adapts to any sensor to which it is connected. This paper will describe the core technology behind this device and the automated data system in which it has been integrated. The paper will also describe the revolutionary enhancements that are planned for this innovative measurement technology. All measurement electronics devices contain circuitry that, if it fails or degrades, requires the unit to be replaced, adding to the cost of operations. Kennedy Space Center is now developing analog circuits that will be able to detect their own failure and dynamically reconfigure their circuitry to restore themselves to normal operation. This technology will have wide ranging application in all electronic devices used in space and ground systems.

X-33/RLV System Health Management/ Vehicle Health Management

NASA Technical Reports Server (NTRS)

Garbos, Raymond J.; Mouyos, William

1998-01-01

To reduce operations cost, the RLV must include the following elements: highly reliable, robust subsystems designed for simple repair access with a simplified servicing infrastructure and incorporating expedited decision making about faults and anomalies. A key component for the Single Stage to Orbit (SSTO) RLV System used to meet these objectives is System Health Management (SHM). SHM deals with the vehicle component- Vehicle Health Management (VHM), the ground processing associated with the fleet (GVHM) and the Ground Infrastructure Health Management (GIHM). The objective is to provide an automated collection and paperless health decision, maintenance and logistics system. Many critical technologies are necessary to make the SHM (and more specifically VHM) practical, reliable and cost effective. Sanders is leading the design, development and integration of the SHM system for RLV and X-33 SHM (a sub-scale, sub-orbit Advanced Technology Demonstrator). This paper will present the X-33 SHM design which forms the baseline for RLV SHM. This paper will also discuss other applications of these technologies.

A company-instituted program to improve blood pressure control in primary care.

PubMed

Alderman, M H; Melcher, L A

1981-01-01

An occupation-based effort to improve the outcome of antihypertensive therapy provided in the community was instituted by the Massachusetts Mutual Life Insurance Company in 1977. The goal of the program was to utilize the administrative and organizational resources of the company to enhance employee/patient adherence to treatment provided in conventional primary care settings. Key elements of the program were: companywide education and on-site screening, referral to community physicians and company assumption of all patient costs, linked to a monitoring system to permit oversight of care. Initially, 98% of employees were screened, 70% accepted referral for care and 59% fully adhered to program performance criteria. Blood pressure control has risen from 36% at the beginning to 69% at the end of the second year. Fully compliant patients have achieved the greatest lowering of blood pressure and compiled the best work attendance record. Program costs are modest and acceptance by employees and physicians supports the concept that occupation-based, systematic efforts can enhance the impact of primary care.

Australian defence requirements and initiatives in smart materials and structures

NASA Astrophysics Data System (ADS)

Wilson, Alan R.; Galea, Stephen C.; Scala, Christine; Wong, Albert

2002-11-01

The Australian Defence Force is increasingly facing escalating costs on through-life support for major platforms (ships, aircraft and land vehicles). The application of smart materials and structures technologies in platform management systems is seen as a very promising approach to reduce these costs and to potentially achieve significant enhancement of platform capability. A new DSTO Key Initiative, 'Smart Materials and Structures', has been recently developed and funded to address these technologies. The Initiative will build on and grow the current activities within DSTO and promote collaboration with external Australian institutes and industry. This paper will present an overview of the Initiative and the generic sensor and system issues inherent in the 'whole-of-platform' and 'whole-of-life' monitoring and management of major defence platforms. Examples for some particular elements of this will be drawn from current work in DSTO. Other presentations in the conference will cover the technical and scientific aspects of these in more detail.

Reverse time migration by Krylov subspace reduced order modeling

NASA Astrophysics Data System (ADS)

Basir, Hadi Mahdavi; Javaherian, Abdolrahim; Shomali, Zaher Hossein; Firouz-Abadi, Roohollah Dehghani; Gholamy, Shaban Ali

2018-04-01

Imaging is a key step in seismic data processing. To date, a myriad of advanced pre-stack depth migration approaches have been developed; however, reverse time migration (RTM) is still considered as the high-end imaging algorithm. The main limitations associated with the performance cost of reverse time migration are the intensive computation of the forward and backward simulations, time consumption, and memory allocation related to imaging condition. Based on the reduced order modeling, we proposed an algorithm, which can be adapted to all the aforementioned factors. Our proposed method benefit from Krylov subspaces method to compute certain mode shapes of the velocity model computed by as an orthogonal base of reduced order modeling. Reverse time migration by reduced order modeling is helpful concerning the highly parallel computation and strongly reduces the memory requirement of reverse time migration. The synthetic model results showed that suggested method can decrease the computational costs of reverse time migration by several orders of magnitudes, compared with reverse time migration by finite element method.

Modeling the Value Recovery of Rare Earth Permanent Magnets at End-of-Life

DOE PAGES

Cong, Liang; Jin, Hongyue; Fitsos, Pete; ...

2015-05-21

Permanent magnets containing rare earth elements (REEs) such as Dysprosium and Neodymium offer an advantage over non-REE containing magnets (e.g. ferrite or AlNiCo) in terms of power relative to size. However, REE availability has varied significantly in recent years leading to volatility in the cost of rare earth permanent magnets (REPMs). The supply of REEs can be increased by recycling consumer products and industrial machinery that contain REPMs at product end-of-life (EOL). This paper discusses the REE recovery process for EOL products. The optimal dismantling of products is examined with an emphasis placed on obtaining used REPMs. The challenge ofmore » collecting, managing, transporting, and processing used products is addressed through the development of a cost model for REPM recovery. This model is used to investigate several EOL strategies for recovering REPMs. Sensitivity analysis is conducted to identify the key factors that influence value recovery economics. A hard disk drive serves as a case study for model demonstration.« less

[Management and new current French recommendations for tetanus care].

PubMed

Nicolai, Dominique; Farcet, Anaïs; Molines, Catherine; Delalande, Géraldine; Retornaz, Frédérique

2015-06-01

Tetanus is an acute severe disease induced by an exotoxin, often lethal. All cases occur in untreated or inadequately vaccinated patients and mainly in elderly patients who accumulate many risk factors. The current management of wounds faced difficulties in the assessment of immunization status and wound risks status. Indeed, all injuries can potentially lead to tetanus. Minor risks and chronic wounds are mainly found as tetanus cause. Vaccination remains the key element in reducing the morbidity and mortality associated with tetanus. It is estimated that the vaccine's coverage is fairly good, but decreases with age. To improve tetanus prevention, new vaccine recommendations have been established which recommend vaccine's injections at fixed age, but their impact seems to be limited especially in the elderly. The immunochromatographic tests have demonstrated cost-effectiveness in the Emergency department settings. They are currently not available outside hospital while general practionners also face a significant risk. Effectiveness of these tests should be studied in outpatients population including cost-effectiveness.

Affordable Development and Demonstration of a Small NTR Engine and Stage: A Preliminary NASA, DOE, and Industry Assessment

NASA Technical Reports Server (NTRS)

Borowski, Stanley K.; Sefcik, Robert J.; Fittje, James E.; McCurdy, David R.; Qualls, Arthur L.; Schnitzler, Bruce G.; Werner, James E.; Weitzberg, Abraham; Joyner, Claude R.

2015-01-01

The Nuclear Thermal Rocket (NTR) represents the next evolutionary step in cryogenic liquid rocket engines. Deriving its energy from fission of uranium-235 atoms contained within fuel elements that comprise the engine's reactor core, the NTR can generate high thrust at a specific impulse of approx. 900 seconds or more - twice that of today's best chemical rockets. In FY'11, as part of the AISP project, NASA proposed a Nuclear Thermal Propulsion (NTP) effort that envisioned two key activities - "Foundational Technology Development" followed by system-level "Technology Demonstrations". Five near-term NTP activities identified for Foundational Technology Development became the basis for the NCPS project started in FY'12 and funded by NASA's AES program. During Phase 1 (FY'12-14), the NCPS project was focused on (1) Recapturing fuel processing techniques and fabricating partial length "heritage" fuel elements for the two candidate fuel forms identified by NASA and the DOE - NERVA graphite "composite" and the uranium dioxide (UO2) in tungsten "cermet". The Phase 1 effort also included: (2) Engine Conceptual Design; (3) Mission Analysis and Requirements Definition; (4) Identification of Affordable Options for Ground Testing; and (5) Formulation of an Affordable and Sustainable NTP Development Strategy. During FY'14, a preliminary plan for DDT&E was outlined by GRC, the DOE and industry for NASA HQ that involved significant system-level demonstration projects that included GTD tests at the NNSS, followed by a FTD mission. To reduce development costs, the GTD and FTD tests use a small, low thrust (approx. 7.5 or 16.5 klbf) engine. Both engines use graphite composite fuel and a "common" fuel element design that is scalable to higher thrust (approx. 25 klbf) engines by increasing the number of elements in a larger diameter core that can produce greater thermal power output. To keep the FTD mission cost down, a simple "1-burn" lunar flyby mission was considered along with maximizing the use of existing and flight proven liquid rocket and stage hardware (e.g., from the RL10-B2 engine and Delta Cryogenic Second Stage) to further ensure affordability. This paper provides a preliminary NASA, DOE and industry assessment of what is required - the key DDT&E activities, development options, and the associated schedule - to affordably build, ground test and fly a small NTR engine and stage within a 10-year timeframe.

Demandite, lunar materials and space industrialization

NASA Technical Reports Server (NTRS)

Criswell, D. R.

1977-01-01

Terrestrial industry consumes a wide range of elements in producing the outputs which support and make industrial societies possible. 'Demandite' is a conceptual or synthetic molecule which is composed of the weight fractions of the major elements consumed by industry. Demandite needed for mature industrial activities in space will differ from the terrestrial composition because solar energy must replace hydrocarbon-energy, lunar and asteroidal bulk compositions are different from mineral deposits on the earth, and the major bulk processing in space will be the creation of radiation shielding for human habitats to provide real estate in space complete with water, atmosphere and life-stock elements. Demandite cost may be dominated by earth to deep space transport cost of minor elemental constituents depleted in the lunar soils unless careful attention is given to substitution of materials, searches of the moon (polar regions) and asteroids for the depleted elements, and continuing lowering of earth to deep space transport costs.

Principles of cost-benefit analysis for ERTS experiments, volumes 1 and 2

NASA Technical Reports Server (NTRS)

1973-01-01

The basic elements of a cost-benefit study are discussed along with special considerations for ERTS experiments. Elements required for a complete economic analysis of ERTS are considered to be: statement of objectives, specification of assumptions, enumeration of system alternatives, benefit analysis, cost analysis nonefficiency considerations, and final system selection. A hypothetical cost-benefit example is presented with the assumed objective of an increase in remote sensing surveys of grazing lands to better utilize available forage to lower meat prices.

User’s Manual for SEEK TALK Full Scale Engineering Development Life Cycle Cost (LCC) Model. Volume II. Model Equations and Model Operations.

DTIC Science & Technology

1981-04-01

LIFE CYCLE COST (LCC) LCC SENSITIVITY ANALYSIS LCC MODE , REPAIR LEVEL ANALYSIS (RLA) 20 ABSTRACT (Cnn tlnue on reverse side It necessary and Identify... level analysis capability. Next it provides values for Air Force input parameters and instructions for contractor inputs, general operating...Maintenance Manhour Requirements 39 5.1.4 Calculation of Repair Level Fractions 43 5.2 Cost Element Equations 47 5.2.1 Production Cost Element 47

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

An assessment of state-of-the-art technologies that are applicable to silicon solar cell and solar cell module fabrication is provided. The assessment consists of a technical feasibility evaluation and a cost projection for high-volume production of silicon solar cell modules. The cost projection was approached from two directions; a design-to-cost analysis assigned cost goals to each major process element in the fabrication scheme, and a cost analysis built up projected costs for alternate technologies for each process element. A technical evaluation was used in combination with the cost analysis to identify a baseline low cost process. A novel approach to metal pattern design based on minimum power loss was developed. These design equations were used as a tool in the evaluation of metallization technologies.

Economies of density for on-site waste water treatment.

PubMed

Eggimann, Sven; Truffer, Bernhard; Maurer, Max

2016-09-15

Decentralised wastewater treatment is increasingly gaining interest as a means of responding to sustainability challenges. Cost comparisons are a crucial element of any sustainability assessment. While the cost characteristics of centralised waste water management systems (WMS) have been studied extensively, the economics of decentralised WMS are less understood. A key motivation for studying the costs of decentralised WMS is to compare the cost of centralised and decentralised WMS in order to decide on cost-efficient sanitation solutions. This paper outlines a model designed to assess those costs which depend on the spatial density of decentralised wastewater treatment plants in a region. Density-related costs are mostly linked to operation and maintenance activities which depend on transportation, like sludge removal or the visits of professionals to the plants for control, servicing or repairs. We first specify a modelled cost-density relationship for a region in a geometric two-dimensional space by means of heuristic routing algorithms that consider time and load-capacity restrictions. The generic model is then applied to a Swiss case study for which we specify a broad range of modelling parameters. As a result, we identify a 'hockey-stick'-shaped cost curve that is characterised by strong cost reductions at high density values which level out at around 1 to 1.5 plants per km(2). Variations in the cost curves are mostly due to differences in management approaches (scheduled or unscheduled emptying). In addition to the well-known diseconomies of scale in the case of centralised sanitation, we find a similar generic cost behaviour for decentralised sanitation due to economies of density. Low densities in sparsely populated regions thus result in higher costs for both centralised and decentralised system. Policy implications are that efforts to introduce decentralised options in a region should consider the low-density/high-cost problem when comparing centralised and decentralised options. Copyright © 2016 Elsevier Ltd. All rights reserved.

The experience of adolescents participating in a randomised clinical trial in the field of mental health: a qualitative study.

PubMed

Midgley, Nick; Isaacs, Danny; Weitkamp, Katharina; Target, Mary

2016-07-28

This descriptive study aimed to investigate adolescents' motivations for participating in a randomised controlled trial (RCT), to explore the understanding that the young people had regarding a number of aspects of the trial design, to examine whether or not they found participation in the trial to be acceptable and what affected this, and to identify whether and how the young people felt that their participation in the RCT impacted on their experience of therapy and on therapeutic change. Seventy-six adolescents who were taking part in a large-scale RCT to evaluate the clinical and cost effectiveness of psychological therapies for depression were interviewed at two time-points after completing therapy. The semi-structured interviews, which included a focus on the young people's experience of the research study, were analysed using framework analysis. The vast majority of adolescents found it acceptable to participate in the clinical trial, and many agreed to participate for reasons of 'conditional altruism'. However consent was often given without great understanding of the key elements of the trial, including the difference between treatment arms and the randomisation process. Although the adolescents were largely positive about their experiences from taking part, the study raises questions about whether clinical outcomes may be influenced by participation in the research elements of the trial. Although adolescents are under-represented in clinical trials, those who do participate are generally positive about the experience; however, careful thought needs to be given to key elements of the trial design and the potential impact of the research participation on clinical outcomes. ISRCTN registry, ISRCTN83033550 . Registered on 15 October 2009.

Building large telescopes in orbit using small satellites

NASA Astrophysics Data System (ADS)

Saunders, Chris; Lobb, Dan; Sweeting, Martin; Gao, Yang

2017-12-01

In many types of space mission there is a constant desire for larger and larger instrument apertures, primarily for the purposes of increased resolution or sensitivity. In the Radio Frequency domain, this is currently addressed by antennas that unfold or deploy on-orbit. However, in the optical and infrared domains, this is a significantly more challenging problem, and has up to now either been addressed by simply having large monolithic mirrors (which are fundamentally limited by the volume and mass lifting capacity of any launch vehicle) or by complex 'semi-folding' designs such as the James Webb Space Telescope. An alternative is to consider a fractionated instrument which is launched as a collection of individual smaller elements which are then assembled (or self-assemble) once in space, to form a much larger overall instrument. SSTL has been performing early concept assessment work on such systems for high resolution science observations from high orbits (potentially also for persistent surveillance of Earth). A point design of a 25 m sparse aperture (annular ring) telescope is presented. Key characteristics of 1) multiple small elements launched separately and 2) on-orbit assembly to form a larger instrument are included in the architecture. However, on-orbit assembly brings its own challenges in terms of guidance navigation and control, robotics, docking mechanisms, system control and data handling, optical alignment and stability, and many other elements. The number and type of launchers used, and the technologies and systems used heavily affect the outcome and general cost of the telescope. The paper describes one of the fractionated architecture concepts currently being studied by SSTL, including the key technologies and operational concepts that may be possible in the future.

The MELiSSA GreenMOSS Study: Preliminary Design Considerations for a Greenhouse Module on the Lunar Surface

NASA Astrophysics Data System (ADS)

Lobascio, Cesare; Paille, Christel; Lamantea, Matteo Maria; Boscheri, Giorgio; Rossetti, Vittorio

Extended human presence on an extraterrestrial planetary surface will be made possible by the development of life support systems affordable in the long term. The key elements to support the goal will be the maximization of closure of air and water cycles, as well as the development of cost-effective and reliable hardware, including a careful strategic effort toward reduction of spare parts and consumables. Regenerative life support systems likely represent the final step toward long term sustainability of a space crew, allowing in situ food production and regeneration of organic waste. Referring to the MELiSSA loop, a key element for food production is the Higher Plant Compartment. The paper focuses on the preliminary design of a Greenhouse at the lunar South Pole, as performed within the “Greenhouse Module for Space System” (GreenMOSS) study, under a contract from the European Space Agency. The greenhouse is in support to a relatively small crew for provision of an energetic food complement. Resources necessary for the greenhouse such as water, carbon dioxide and nitrogen are assumed available, as required. The relevant mass and energy balances for incoming resources should be part of future studies, and should help integrate this element with the interfacing MELISSA compartments. Net oxygen production and harvested crop biomass from the greenhouse system will be quantified. This work presents the results of the two major trade-offs performed as part of this study: artificial vs natural illumination and monocrop vs multicrop solutions. Comparisons among possible design solutions were driven by the ALiSSE metric as far as practicable within this preliminary stage, considering mass and power parameters. Finally, the paper presents the mission duration threshold for determining the convenience of the designed solution with respect to other resources provision strategies

Elements affecting wound healing time: An evidence based analysis.

PubMed

Khalil, Hanan; Cullen, Marianne; Chambers, Helen; Carroll, Matthew; Walker, Judi

2015-01-01

The purpose of this study was to identify the predominant client factors and comorbidities that affected the time taken for wounds to heal. A prospective study design used the Mobile Wound Care (MWC) database to capture and collate detailed medical histories, comorbidities, healing times and consumable costs for clients with wounds in Gippsland, Victoria. There were 3,726 wounds documented from 2,350 clients, so an average of 1.6 wounds per client. Half (49.6%) of all clients were females, indicating that there were no gender differences in terms of wound prevalence. The clients were primarily older people, with an average age of 64.3 years (ranging between 0.7 and 102.9 years). The majority of the wounds (56%) were acute and described as surgical, crush and trauma. The MWC database categorized the elements that influenced wound healing into 3 groups--factors affecting healing (FAH), comorbidities, and medications known to affect wound healing. While there were a multitude of significant associations, multiple linear regression identified the following key elements: age over 65 years, obesity, nonadherence to treatment plan, peripheral vascular disease, specific wounds associated with pressure/friction/shear, confirmed infection, and cerebrovascular accident (stroke). Wound healing is a complex process that requires a thorough understanding of influencing elements to improve healing times.© 2015 by the Wound Healing Society. © 2015 by the Wound Healing Society.

Microstrip Antenna for Remote Sensing of Soil Moisture and Sea Surface Salinity

NASA Technical Reports Server (NTRS)

Ramhat-Samii, Yahya; Kona, Keerti; Manteghi, Majid; Dinardo, Steven; Hunter, Don; Njoku, Eni; Wilson, Wiliam; Yueh, Simon

2009-01-01

This compact, lightweight, dual-frequency antenna feed developed for future soil moisture and sea surface salinity (SSS) missions can benefit future soil and ocean studies by lowering mass, volume, and cost of the antenna system. It also allows for airborne soil moisture and salinity remote sensors operating on small aircraft. While microstrip antenna technology has been developed for radio communications, it has yet to be applied to combined radar and radiometer for Earth remote sensing. The antenna feed provides a key instrument element enabling high-resolution radiometric observations with large, deployable antennas. The design is based on the microstrip stacked-patch array (MSPA) used to feed a large, lightweight, deployable, rotating mesh antenna for spaceborne L-band (approximately equal to 1 GHz) passive and active sensing systems. The array consists of stacked patches to provide dual-frequency capability and suitable radiation patterns. The stacked-patch microstrip element was designed to cover the required L-band center frequencies at 1.26 GHz (lower patch) and 1.413 GHz (upper patch), with dual-linear polarization capabilities. The dimension of patches produces the required frequencies. To achieve excellent polarization isolation and control of antenna sidelobes for the MSPA, the orientation of each stacked-patch element within the array is optimized to reduce the cross-polarization. A specialized feed-distribution network was designed to achieve the required excitation amplitude and phase for each stacked-patch element.

Power-to-heat in adiabatic compressed air energy storage power plants for cost reduction and increased flexibility

NASA Astrophysics Data System (ADS)

Dreißigacker, Volker

2018-04-01

The development of new technologies for large-scale electricity storage is a key element in future flexible electricity transmission systems. Electricity storage in adiabatic compressed air energy storage (A-CAES) power plants offers the prospect of making a substantial contribution to reach this goal. This concept allows efficient, local zero-emission electricity storage on the basis of compressed air in underground caverns. The compression and expansion of air in turbomachinery help to balance power generation peaks that are not demand-driven on the one hand and consumption-induced load peaks on the other. For further improvements in cost efficiencies and flexibility, system modifications are necessary. Therefore, a novel concept regarding the integration of an electrical heating component is investigated. This modification allows increased power plant flexibilities and decreasing component sizes due to the generated high temperature heat with simultaneously decreasing total round trip efficiencies. For an exemplarily A-CAES case simulation studies regarding the electrical heating power and thermal energy storage sizes were conducted to identify the potentials in cost reduction of the central power plant components and the loss in round trip efficiency.

Wind for Schools (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, M.

2007-06-01

Schools are key to achieving the goal of producing 20% of the nation's electricity demand. Most significantly, schools are training the scientists, technicians, businesspeople, decisionmakers, and teachers of the future. What students learn and believe about wind energy will impact the United States' ability to create markets and policy, develop and improve technology, finance and implement projects, and create change in all of our public and private institutions. In the nearer term, school districts have large facility costs, electrical loads, and utility costs. They are always in search of ways to reduce costs or obtain revenue to improve educational programs.more » Schools value teaching about the science and technology of renewable energy. They are important opinion leaders, particularly in rural communities. And their financial structures are quite different from other institutions (funding, incentives, restrictions, etc.). Learning objectives: The presentation will use case studies, project experience, and discussion with the audience to convey the current status of wind energy applications and education in U.S. schools and understanding of the elements that create a successful school wind energy project. The presentation will provide attendees with a background in the current level of knowledge and generate discussion on several themes.« less

Delay and cost performance analysis of the diffie-hellman key exchange protocol in opportunistic mobile networks

NASA Astrophysics Data System (ADS)

Soelistijanto, B.; Muliadi, V.

2018-03-01

Diffie-Hellman (DH) provides an efficient key exchange system by reducing the number of cryptographic keys distributed in the network. In this method, a node broadcasts a single public key to all nodes in the network, and in turn each peer uses this key to establish a shared secret key which then can be utilized to encrypt and decrypt traffic between the peer and the given node. In this paper, we evaluate the key transfer delay and cost performance of DH in opportunistic mobile networks, a specific scenario of MANETs where complete end-to-end paths rarely exist between sources and destinations; consequently, the end-to-end delays in these networks are much greater than typical MANETs. Simulation results, driven by a random node movement model and real human mobility traces, showed that DH outperforms a typical key distribution scheme based on the RSA algorithm in terms of key transfer delay, measured by average key convergence time; however, DH performs as well as the benchmark in terms of key transfer cost, evaluated by total key (copies) forwards.

Institutional analysis of milkfish supply chain using interpretive structural modelling (ISM) (case study of UD. Bunda Foods, Sidoarjo District)

NASA Astrophysics Data System (ADS)

Silalahi, R. L. R.; Mustaniroh, S. A.; Ikasari, D. M.; Sriulina, R. P.

2018-03-01

UD. Bunda Foods is an SME located in the district of Sidoarjo. UD. Bunda Foods has problems of maintaining its milkfish’s quality assurance and developing marketing strategies. Improving those problems enables UD. Bunda Foods to compete with other similar SMEs and to market its product for further expansion of their business. The objectives of this study were to determine the model of the institutional structure of the milkfish supply chain, to determine the elements, the sub-elements, and the relationship among each element. The method used in this research was Interpretive Structural Modeling (ISM), involving 5 experts as respondents consisting of 1 practitioner, 1 academician, and 3 government organisation employees. The results showed that there were two key elements include requirement and goals elements. Based on the Drive Power-Dependence (DP-D) matrix, the key sub-elements of requirement element, consisted of raw material continuity, appropriate marketing strategy, and production capital, were positioned in the Linkage sector quadrant. The DP-D matrix for the key sub-elements of the goal element also showed a similar position. The findings suggested several managerial implications to be carried out by UD. Bunda Foods include establishing good relationships with all involved institutions, obtaining capital assistance, and attending the marketing training provided by the government.

A NASA Strategy for Leveraging Emerging Launch Vehicles for Routine, Small Payload Missions

NASA Technical Reports Server (NTRS)

Underwood, Bruce E.

2005-01-01

Orbital flight opportunities for small payloads have always been few and far between, and then on February 1, 2002, the situation got worse. In the wake of the loss of the Columbia during STS- 107, changing NASA missions and priorities led to the termination of the Shuttle Small Payloads Projects, including Get-Away Special, Hitcbker, and Space Experiment Module. In spite of the limited opportunities, long queue, and restrictions associated with flying experiments on a man-rated transportation system; the carriers provided a sustained, high quality experiment services for education, science, and technology payloads, and was one of the few games in town. Attempts to establish routine opportunities aboard existing ELVs have been unsuccessful, as the cost-per-pound on small ELVs and conflicts with primary spacecraft on larger vehicles have proven prohibitive. Ths has led to a backlog of existing NASA-sponsored payloads and no prospects or plans for fbture opportunities within the NASA community. The prospects for breaking out of this paradigm appear promising as a result of NASA s partnership with DARPA in pursuit of low-cost, responsive small ELVs under the Falcon Program. Through this partnership several new small ELVs, providing 1000 lbs. to LEO will be demonstrated in less than two years that promise costs that are reasonable enough that NASA, DoD, and other sponsors can once again invest in small payload opportunities. Within NASA, planning has already begun. NASA will be populating one or more of the Falcon demonstration flights with small payloads that are already under development. To accommodate these experiments, Goddard s Wallops Flight Facility has been tasked to develop a multi-payload ejector (MPE) to accommodate the needs of these payloads. The MPE capabilities and design is described in detail in a separately submitted abstract. Beyond use of the demonstration flights however, Goddard has already begun developing strategies to leverage these new ELVs as elements of a larger system designed to provide routine, low-cost end-to-end services for small science, Exploration, and education payloads. The plan leverages the management approaches of the successful Sounding Rocket Program and Shuttle Small Payloads Projects. The strategy consists of using a systems implementation approach of elements, including 1) Falcon ELVs, 2) advanced launch site technologies and processes, 3) suite of experiment carriers accommodating different mission requirements, 4) streamlined integration and test operations, 5 ) experiment brokering and management, and 6) standardized, distributed payload operations. The envisioned suite of carriers includes the MPE, a standard interface experiment carrier, and potentially a reentry fieeflyer experiment carrier. Key to the success of this strategy is standard experiment interfaces within the carriers to limit mission- unique tasks, establishmg and managing a program of scheduled reoccurring flights rather than discrete missions, and streamlined, centralized implementation of the elements. These individual elements are each under development and Goddard will demonstrate the overall system strategy low-cost small payload missions on the initial Falcon demonstration launches from Wallops. goal is to show that this model should be converted to a sustained NASA program supporting science, technology, and education, with annual flight opportunities. The paper will define in detail the various elements of the overall program, as well as provide status, philosophy, and strategy for the program that will hopefully once-and-for-all provide low-cost, routine access to space for the small payloads community.

Cost considerations for long-term ecological monitoring

USGS Publications Warehouse

Caughlan, L.; Oakley, K.L.

2001-01-01

For an ecological monitoring program to be successful over the long-term, the perceived benefits of the information must justify the cost. Financial limitations will always restrict the scope of a monitoring program, hence the program's focus must be carefully prioritized. Clearly identifying the costs and benefits of a program will assist in this prioritization process, but this is easier said than done. Frequently, the true costs of monitoring are not recognized and are, therefore, underestimated. Benefits are rarely evaluated, because they are difficult to quantify. The intent of this review is to assist the designers and managers of long-term ecological monitoring programs by providing a general framework for building and operating a cost-effective program. Previous considerations of monitoring costs have focused on sampling design optimization. We present cost considerations of monitoring in a broader context. We explore monitoring costs, including both budgetary costs--what dollars are spent on--and economic costs, which include opportunity costs. Often, the largest portion of a monitoring program budget is spent on data collection, and other, critical aspects of the program, such as scientific oversight, training, data management, quality assurance, and reporting, are neglected. Recognizing and budgeting for all program costs is therefore a key factor in a program's longevity. The close relationship between statistical issues and cost is discussed, highlighting the importance of sampling design, replication and power, and comparing the costs of alternative designs through pilot studies and simulation modeling. A monitoring program development process that includes explicit checkpoints for considering costs is presented. The first checkpoint occur during the setting of objectives and during sampling design optimization. The last checkpoint occurs once the basic shape of the program is known, and the costs and benefits, or alternatively the cost-effectiveness, of each program element can be evaluated. Moving into the implementation phase without careful evaluation of costs and benefits is risky because if costs are later found to exceed benefits, the program will fail. The costs of development, which can be quite high, will have been largely wasted. Realistic expectations of costs and benefits will help ensure that monitoring programs survive the early, turbulent stages of development and the challenges posed by fluctuating budgets during implementation.

SCENARIOS FOR MEETING CALIFORNIA'S 2050 CLIMATE GOALS California's Carbon Challenge Phase II Volume I: Non-Electricity Sectors and Overall Scenario Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Max; Greenblatt, Jeffrey; Donovan, Sally

2014-06-01

This study provides an updated analysis of long-term energy system scenarios for California consistent with the State meeting its 2050 climate goal, including detailed analysis and assessment of electricity system build-out, operation, and costs across the Western Electricity Coordinating Council (WECC) region. Four key elements are found to be critical for the State to achieve its 2050 goal of 80 percent greenhouse (GHG) reductions from the 1990 level: aggressive energy efficiency; clean electricity; widespread electrification of passenger vehicles, building heating, and industry heating; and large-scale production of low-carbon footprint biofuels to largely replace petroleum-based liquid fuels. The approach taken heremore » is that technically achievable energy efficiency measures are assumed to be achieved by 2050 and aggregated with the other key elements mentioned above to estimate resultant emissions in 2050. The energy and non-energy sectors are each assumed to have the objective of meeting an 80 percent reduction from their respective 1990 GHG levels for the purposes of analysis. A different partitioning of energy and non-energy sector GHG greenhouse reductions is allowed if emission reductions in one sector are more economic or technically achievable than in the other. Similarly, within the energy or non-energy sectors, greater or less than 80 percent reduction from 1990 is allowed for sub-sectors within the energy or non-energy sectors as long as the overall target is achieved. Overall emissions for the key economy-wide scenarios are considered in this report. All scenarios are compliant or nearly compliant with the 2050 goal. This finding suggests that multiple technical pathways exist to achieve the target with aggressive policy support and continued technology development of largely existing technologies.« less

Monitoring in the nearshore: A process for making reasoned decisions

USGS Publications Warehouse

Bodkin, James L.; Dean, T.A.

2003-01-01

Over the past several years, a conceptual framework for the GEM nearshore monitoring program has been developed through a series of workshops. However, details of the proposed monitoring program, e.g. what to sample, where to sample, when to sample and at how many sites, have yet to be determined. In FY 03 we were funded under Project 03687 to outline a process whereby specific alternatives to monitoring are developed and presented to the EVOS Trustee Council for consideration. As part of this process, two key elements are required before reasoned decisions can be made. These are: 1) a comprehensive historical perspective of locations and types of past studies conducted in the nearshore marine communities within Gulf of Alaska, and 2) estimates of costs for each element of a proposed monitoring program. We have developed a GIS database that details available information from past studies of selected nearshore habitats and species in the Gulf of Alaska and provide a visual means of selecting sites based (in part) on the locations for which historical data of interest are available. We also provide cost estimates for specific monitoring plan alternatives and outline several alternative plans that can be accomplished within reasonable budgetary constraints. The products that we will provide are: 1) A GIS database and maps showing the location and types of information available from the nearshore in the Gulf of Alaska; 2) A list of several specific monitoring alternatives that can be conducted within reasonable budgetary constraints; and 3) Cost estimates for proposed tasks to be conducted as part of the nearshore program. Because data compilation and management will not be completed until late in FY03 we are requesting support for close-out of this project in FY 04.

Handbook of estimating data, factors, and procedures. [for manufacturing cost studies

NASA Technical Reports Server (NTRS)

Freeman, L. M.

1977-01-01

Elements to be considered in estimating production costs are discussed in this manual. Guidelines, objectives, and methods for analyzing requirements and work structure are given. Time standards for specific specfic operations are listed for machining, sheet metal working, electroplating and metal treating; painting; silk screening, etching and encapsulating; coil winding; wire preparation and wiring; soldering; and the fabrication of etched circuits and terminal boards. The relation of the various elements of cost to the total cost as proposed for various programs by various contractors is compared with government estimates.

In-Space Transportation for NASA's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Percy, Thomas K.; McGuire, Melissa; Polsgrove, Tara

2015-01-01

As the nation embarks on a new and bold journey to Mars, significant work is being done to determine what that mission and those architectural elements will look like. The Evolvable Mars Campaign, or EMC, is being evaluated as a potential approach to getting humans to Mars. Built on the premise of leveraging current technology investments and maximizing element commonality to reduce cost and development schedule, the EMC transportation architecture is focused on developing the elements required to move crew and equipment to Mars as efficiently and effectively as possible both from a performance and a programmatic standpoint. Over the last 18 months the team has been evaluating potential options for those transportation elements. One of the key aspects of the EMC is leveraging investments being made today in missions like the Asteroid Redirect Mission (ARM) mission using derived versions of the Solar Electric Propulsion (SEP) propulsion systems and coupling them with other chemical propulsion elements that maximize commonality across the architecture between both transportation and Mars operations elements. This paper outlines the broad trade space being evaluated including the different technologies being assessed for transportation elements and how those elements are assembled into an architecture. Impacts to potential operational scenarios at Mars are also investigated. Trades are being made on the size and power level of the SEP vehicle for delivering cargo as well as the size of the chemical propulsion systems and various mission aspects including Inspace assembly and sequencing. Maximizing payload delivery to Mars with the SEP vehicle will better support the operational scenarios at Mars by enabling the delivery of landers and habitation elements that are appropriately sized for the mission. The purpose of this investigation is not to find the solution but rather a suite of solutions with potential application to the challenge of sending cargo and crew to Mars. The goal is that, by building an architecture intelligently with all aspects considered, the sustainable Mars program wisely invests limited resources enabling a long-term human Mars exploration program.

AIDS and HIV Training and Education in Criminal Justice Agencies. AIDS Bulletin.

ERIC Educational Resources Information Center

Hammett, Theodore M.

This bulletin summarizes key elements of an effective AIDS training and education program for law enforcement and corrections personnel. First, these key elements of training and education for criminal justice personnel are discussed: staff participation in materials development; timely and frequent training; mandatory training; live training by…

Importance of Requirements Analysis & Traceability to Improve Software Quality and Reduce Cost and Risk

NASA Technical Reports Server (NTRS)

Kapoor, Manju M.; Mehta, Manju

2010-01-01

The goal of this paper is to emphasize the importance of developing complete and unambiguous requirements early in the project cycle (prior to Preliminary Design Phase). Having a complete set of requirements early in the project cycle allows sufficient time to generate a traceability matrix. Requirements traceability and analysis are the key elements in improving verification and validation process, and thus overall software quality. Traceability can be most beneficial when the system changes. If changes are made to high-level requirements it implies that low-level requirements need to be modified. Traceability ensures that requirements are appropriately and efficiently verified at various levels whereas analysis ensures that a rightly interpreted set of requirements is produced.

A flexible CAMAC based data system for Space Shuttle scientific instruments

NASA Technical Reports Server (NTRS)

Ehrmann, C. H.; Baker, R. G.; Smith, R. L.; Kaminski, T. J.

1979-01-01

An effort has been made within NASA to produce a low-cost modular system for implementation of Shuttle payloads based on the CAMAC standards for packaging and data transfer. A key element of such a modular system is a means for controlling the data system, collecting and processing the data for transmission to the ground, and issuing commands to the instrument either from the ground or based on the data collected. A description is presented of such a means based on a network of digital processors and CAMAC crate controllers, which allows for the implementation of instruments ranging from those requiring only a single CAMAC crate of functional modules and no data processing to ones requiring multiple crates and multiple data processors.

Watermarking requirements for Boeing digital cinema

NASA Astrophysics Data System (ADS)

Lixvar, John P.

2003-06-01

The enormous economic incentives for safeguarding intellectual property in the digital domain have made forensic watermarking a research topic of considerable interest. However, a recent examination of some of the leading product development efforts reveals that at present there is no effective watermarking implementation that addresses both the fidelity and security requirements of high definition digital cinema. If Boeing Digital Cinema (BDC, a business unit of Boeing Integrated Defense Systems) is to succeed in using watermarking as a deterrent to the unauthorized capture and distribution of high value cinematic material, the technology must be robust, transparent, asymmetric in its insertion/detection costs, and compatible with all the other elements of Boeing's multi-layered security system, including its compression, encryption, and key management services.

Packet communications in satellites with multiple-beam antennas and signal processing

NASA Technical Reports Server (NTRS)

Davies, R.; Chethik, F.; Penick, M.

1980-01-01

A communication satellite with a multiple-beam antenna and onboard signal processing is considered for use in a 'message-switched' data relay system. The signal processor may incorporate demodulation, routing, storage, and remodulation of the data. A system user model is established and key functional elements for the signal processing are identified. With the throughput and delay requirements as the controlled variables, the hardware complexity, operational discipline, occupied bandwidth, and overall user end-to-end cost are estimated for (1) random-access packet switching; and (2) reservation-access packet switching. Other aspects of this network (eg, the adaptability to channel switched traffic requirements) are examined. For the given requirements and constraints, the reservation system appears to be the most attractive protocol.

Advances in metabolic pathway and strain engineering paving the way for sustainable production of chemical building blocks.

PubMed

Chen, Yun; Nielsen, Jens

2013-12-01

Bio-based production of chemical building blocks from renewable resources is an attractive alternative to petroleum-based platform chemicals. Metabolic pathway and strain engineering is the key element in constructing robust microbial chemical factories within the constraints of cost effective production. Here we discuss how the development of computational algorithms, novel modules and methods, omics-based techniques combined with modeling refinement are enabling reduction in development time and thus advance the field of industrial biotechnology. We further discuss how recent technological developments contribute to the development of novel cell factories for the production of the building block chemicals: adipic acid, succinic acid and 3-hydroxypropionic acid. Copyright © 2013 Elsevier Ltd. All rights reserved.

Overview of research addressing ethical dimensions of participation in traumatic stress studies: autonomy and beneficence.

PubMed

Newman, Elana; Kaloupek, Danny

2009-12-01

One element of the design of human research studies is ethically informed decision-making. Key issues include the safety, costs, and benefits of participation. Historically, much of this decision-making was based on opinion rather than formal evidence. Recently, however, investigators in the traumatic stress field have begun to collect data that are relevant to these decisions. In this article, the authors focus on issues emanating from the ethical concepts of autonomy and respect for persons and beneficence and nonmaleficence, and then summarize relevant evidence from studies with trauma-exposed individuals. Discussion addresses implications of this evidence for research practice and policy, and identifies some potentially informative data collections opportunities for future trauma studies.

Images of health insurance in popular film: the dissolving critique.

PubMed

Pendo, Elizabeth A

2004-01-01

Several recent films have villainized the health-insurance industry as a central element of their plots. This Article examines three of those films: Critical Care, The Rainmaker, and John Q. It analyzes these films through the context of the consumer backlash against managed care that began in the 1990s and shows how these films reflect the consumer sentiment regarding health-insurance companies and the cost controlling strategies they employ. In addition, the Article identifies three key premises about health insurance in the films that, although exaggerated and incomplete, have significant factual support. Ultimately, the author argues that, despite their passionately critical and liberal tone, these films actually put forward solutions that are highly individualist and conservative, rather than inclusive and systemic.

78 FR 17747 - Agency Information Collection Activities: Request for Comments for a New Information Collection.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... define the types of analyses to be used to evaluate benefits, cost-effectiveness and feasibility...: Feasibility of Element-Level Bridge Inspection for Non- National Highway System Bridges. Background: The... a requirement for a study on the benefits, cost-effectiveness, and feasibility of requiring element...

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks.

PubMed

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-08-18

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks.

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks

PubMed Central

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-01-01

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks. PMID:28788168

Blue Marble: Remote Characterization of Habitable Planets

NASA Technical Reports Server (NTRS)

Woolf, Neville; Lewis, Brian; Chartres, James; Genova, Anthony

2009-01-01

The study of the nature and distribution of habitable environments beyond the Solar System is a key area for Astrobiology research. At the present time, our Earth is the only habitable planet that can be characterized in the same way that we might characterize planets beyond the Solar System. Due to limitations in our current and near-future technology, it is likely that extra-solar planets will be observed as single-pixel objects. To understand this data, we must develop skills in analyzing and interpreting the radiation obtained from a single pixel. These skills must include the study of the time variation of the radiation, and the range of its photometric, spectroscopic and polarimetric properties. In addition, to understand whether we are properly analyzing the single pixel data, we need to compare it with a ground truth of modest resolution images in key spectral bands. This paper discusses the concept for a mission called Blue Marble that would obtain data of the Earth using a combination of spectropolarimetry, spectrophotometry, and selected band imaging. To obtain imagery of the proper resolution, it is desirable to place the Blue Marble spacecraft no closer than the outer region of cis-lunar space. This paper explores a conceptual mission design that takes advantage of low-cost launchers, bus designs and mission elements to provide a cost effective observing platform located at one of the stable Earth-moon Lagrangian points (L4, L5). The mission design allows for the development and use of novel technologies, such as a spinning moon sensor for attitude control, and leverages lessons-learned from previous low-cost spacecraft such as Lunar Prospector to yield a low-risk mission concept.

A new vision of the post-NIST civil infrastructure program: the challenges of next-generation construction materials and processes

NASA Astrophysics Data System (ADS)

Wu, H. Felix; Wan, Yan

2014-03-01

Our nation's infrastructural systems are crumbling. The deteriorating process grows over time. The physical aging of these vital facilities and the remediation of their current critical state pose a key societal challenge to the United States. Current sensing technologies, while well developed in controlled laboratory environments, have not yet yielded tools for producing real-time, in-situ data that are adequately comprehensible for infrastructure decision-makers. The need for advanced sensing technologies is national because every municipality and state in the nation faces infrastructure management challenges. The need is critical because portions of infrastructure are reaching the end of their life-spans and there are few cost-effective means to monitor infrastructure integrity and to prioritize the renovation and replacement of infrastructure elements. New advanced sensing technologies that produce cost-effective inspection and real-time monitoring data, and that can also help or aid in meaningful interpretation of the acquired data, therefore will enhance the safety in regard to the public on structural integrity by issuing timely and accurate alert data for effective maintenance to avoid disasters happening. New advanced sensing technologies also allow more informed management of infrastructural investments by avoiding premature replacement of infrastructure and identifying those structures in need of immediate action to prevent from catastrophic failure. Infrastructure management requires that once a structural defect is detected, an economical and efficient repair be made. Advancing the technologies of repairing infrastructure elements in contact with water, road salt, and subjected to thermal changes requires innovative research to significantly extend the service life of repairs, lower the costs of repairs, and provide repair technologies that are suitable for a wide range of conditions. All these new technologies will provide increased lifetimes, security, and safety of elements of critical infrastructure for the Nation's already deteriorating civil infrastructure. It is envisioned that the Nation should look far beyond: not only should we efficiently and effectively address current problems of the aging infrastructure, but we must also further develop next-generation construction materials and processes for new construction. To accomplish this ambitious goal, we must include process efficiency that will help select the most reliable and cost-effective materials in construction processes; performance and cost will be the prime consideration for selections construction materials based on life-cycle cost and materials performance; energy efficiency will drive reduced energy consumption from current levels by 50 % per unit of output; and environmental responsiveness will achieve net-zero waste from construction materials and its constituents. Should it be successfully implemented, we will transform the current 21st century infrastructure systems to enable the vital functioning of society and improve competitiveness of the economy to ensure that our quality of life remains high.

TU-G-BRCD-01: Will the High Cost of Proton Therapy Facilities Limit the Availability of Proton Therapy Treatment?

PubMed

Maughan, R

2012-06-01

The potential dose distribution advantages associated with proton therapy, and particularly with pencil beam scanning (PBS) techniques, have lead to considerable interest in this modality in recent years. However, the large capital expenditure necessary for such a project requires careful financial consideration and business planning. The complexity of the beam delivery systems impacts the capital expenditure and the PBS only systems presently being advocated can reduce these costs. Also several manufacturers are considering "one-room" facilities as less expensive alternatives to multi-room facilities. This presentation includes a brief introduction to beam delivery options (passive scattering, uniform and modulated scanning) and some of the new technologies proposed for providing less expensive proton therapy systems. Based on current experience, data on proton therapy center start-up costs, running costs and the financial challenges associated with making this highly conformal therapy more widely available will be discussed. Issues associated with proton therapy implementation that are key to project success include strong project management, vendor cooperation and collaboration, staff recruitment and training. Time management during facility start up is a major concern, particularly in multi-room systems, where time must be shared between continuing vendor system validation, verification and acceptance testing, and user commissioning and patient treatments. The challenges associated with facility operation during this period and beyond are discussed, focusing on how standardization of process, downtime and smart scheduling can influence operational efficiency. 1. To understand the available choices for proton therapy facilities, the different beam delivery systems and the financial implications associated with these choices. 2. To understand the key elements necessary for successfully implementing a proton therapy program. 3. To understand the challenges associated with on-going facility management to achieve an efficient fully operational system. © 2012 American Association of Physicists in Medicine.

Keys to the House: Unlocking Residential Savings With Program Models for Home Energy Upgrades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grevatt, Jim; Hoffman, Ian; Hoffmeyer, Dale

After more than 40 years of effort, energy efficiency program administrators and associated contractors still find it challenging to penetrate the home retrofit market, especially at levels commensurate with state and federal goals for energy savings and emissions reductions. Residential retrofit programs further have not coalesced around a reliably successful model. They still vary in design, implementation and performance, and they remain among the more difficult and costly options for acquiring savings in the residential sector. If programs are to contribute fully to meeting resource and policy objectives, administrators need to understand what program elements are key to acquiring residentialmore » savings as cost effectively as possible. To that end, the U.S. Department of Energy (DOE) sponsored a comprehensive review and analysis of home energy upgrade programs with proven track records, focusing on those with robustly verified savings and constituting good examples for replication. The study team reviewed evaluations for the period 2010 to 2014 for 134 programs that are funded by customers of investor-owned utilities. All are programs that promote multi-measure retrofits or major system upgrades. We paid particular attention to useful design and implementation features, costs, and savings for nearly 30 programs with rigorous evaluations of performance. This meta-analysis describes program models and implementation strategies for (1) direct install retrofits; (2) heating, ventilating and air-conditioning (HVAC) replacement and early retirement; and (3) comprehensive, whole-home retrofits. We analyze costs and impacts of these program models, in terms of both energy savings and emissions avoided. These program models can be useful guides as states consider expanding their strategies for acquiring energy savings as a resource and for emissions reductions. We also discuss the challenges of using evaluations to create program models that can be confidently applied in multiple jurisdictions.« less

Injector element characterization methodology

NASA Technical Reports Server (NTRS)

Cox, George B., Jr.

1988-01-01

Characterization of liquid rocket engine injector elements is an important part of the development process for rocket engine combustion devices. Modern nonintrusive instrumentation for flow velocity and spray droplet size measurement, and automated, computer-controlled test facilities allow rapid, low-cost evaluation of injector element performance and behavior. Application of these methods in rocket engine development, paralleling their use in gas turbine engine development, will reduce rocket engine development cost and risk. The Alternate Turbopump (ATP) Hot Gas Systems (HGS) preburner injector elements were characterized using such methods, and the methodology and some of the results obtained will be shown.

Solar power satellite rectenna design study: Directional receiving elements and parallel-series combining analysis

NASA Technical Reports Server (NTRS)

Gutmann, R. J.; Borrego, J. M.

1978-01-01

Rectenna conversion efficiencies (RF to dc) approximating 85 percent were demonstrated on a small scale, clearly indicating the feasibility and potential of efficiency of microwave power to dc. The overall cost estimates of the solar power satellite indicate that the baseline rectenna subsystem will be between 25 to 40 percent of the system cost. The directional receiving elements and element extensions were studied, along with power combining evaluation and evaluation extensions.

Synthesis of a large communications aperture using small antennas

NASA Technical Reports Server (NTRS)

Resch, George M.; Cwik, T. W.; Jamnejad, V.; Logan, R. T.; Miller, R. B.; Rogstad, Dave H.

1994-01-01

In this report we compare the cost of an array of small antennas to that of a single large antenna assuming both the array and single large antenna have equal performance and availability. The single large antenna is taken to be one of the 70-m antennas of the Deep Space Network. The cost of the array is estimated as a function of the array element diameter for three different values of system noise temperature corresponding to three different packaging schemes for the first amplifier. Array elements are taken to be fully steerable paraboloids and their cost estimates were obtained from commercial vendors. Array loss mechanisms and calibration problems are discussed. For array elements in the range 3 - 35 m there is no minimum in the cost versus diameter curve for the three system temperatures that were studied.

The Clinical Health Economics System Simulation (CHESS): a teaching tool for systems- and practice-based learning.

PubMed

Voss, John D; Nadkarni, Mohan M; Schectman, Joel M

2005-02-01

Academic medical centers face barriers to training physicians in systems- and practice-based learning competencies needed to function in the changing health care environment. To address these problems, at the University of Virginia School of Medicine the authors developed the Clinical Health Economics System Simulation (CHESS), a computerized team-based quasi-competitive simulator to teach the principles and practical application of health economics. CHESS simulates treatment costs to patients and society as well as physician reimbursement. It is scenario based with residents grouped into three teams, each team playing CHESS using differing (fee-for-service or capitated) reimbursement models. Teams view scenarios and select from two or three treatment options that are medically justifiable yet have different potential cost implications. CHESS displays physician reimbursement and patient and societal costs for each scenario as well as costs and income summarized across all scenarios extrapolated to a physician's entire patient panel. The learners are asked to explain these findings and may change treatment options and other variables such as panel size and case mix to conduct sensitivity analyses in real time. Evaluations completed in 2003 by 68 (94%) CHESS resident and faculty participants at 19 U.S. residency programs preferred CHESS to a traditional lecture-and-discussion format to learn about medical decision making, physician reimbursement, patient costs, and societal costs. Ninety-eight percent reported increased knowledge of health economics after viewing the simulation. CHESS demonstrates the potential of computer simulation to teach health economics and other key elements of practice- and systems-based competencies.

Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarsa, Eric

2015-08-31

During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimallymore » distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.« less

Reducing Life-Cycle Costs.

ERIC Educational Resources Information Center

Roodvoets, David L.

2003-01-01

Presents factors to consider when determining roofing life-cycle costs, explaining that costs do not tell the whole story; discussing components that should go into the decision (cost, maintenance, energy use, and environmental costs); and concluding that important elements in reducing life-cycle costs include energy savings through increased…

Disposable bioluminescence-based biosensor for detection of bacterial count in food.

PubMed

Luo, Jinping; Liu, Xiaohong; Tian, Qing; Yue, Weiwei; Zeng, Jing; Chen, Guangquan; Cai, Xinxia

2009-11-01

A biosensor for rapid detection of bacterial count based on adenosine 5'-triphosphate (ATP) bioluminescence has been developed. The biosensor is composed of a key sensitive element and a photomultiplier tube used as a detector element. The disposable sensitive element consists of a sampler, a cartridge where intracellular ATP is chemically extracted from bacteria, and a microtube where the extracted ATP reacts with the luciferin-luciferase reagent to produce bioluminescence. The bioluminescence signal is transformed into relevant electrical signal by the detector and further measured with a homemade luminometer. Parameters affecting the amount of the extracted ATP, including the types of ATP extractants, the concentrations of ATP extractant, and the relevant neutralizing reagent, were optimized. Under the optimal experimental conditions, the biosensor showed a linear response to standard bacteria in a concentration range from 10(3) to 10(8) colony-forming units (CFU) per milliliter with a correlation coefficient of 0.925 (n=22) within 5min. Moreover, the bacterial count of real food samples obtained by the biosensor correlated well with those by the conventional plate count method. The proposed biosensor, with characteristics of low cost, easy operation, and fast response, provides potential application to rapid evaluation of bacterial contamination in the food industry, environment monitoring, and other fields.

Definition and preliminary design of the Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 3: Program cost estimates

NASA Technical Reports Server (NTRS)

1990-01-01

Cost estimates for phase C/D of the laser atmospheric wind sounder (LAWS) program are presented. This information provides a framework for cost, budget, and program planning estimates for LAWS. Volume 3 is divided into three sections. Section 1 details the approach taken to produce the cost figures, including the assumptions regarding the schedule for phase C/D and the methodology and rationale for costing the various work breakdown structure (WBS) elements. Section 2 shows a breakdown of the cost by WBS element, with the cost divided in non-recurring and recurring expenditures. Note that throughout this volume the cost is given in 1990 dollars, with bottom line totals also expressed in 1988 dollars (1 dollar(88) = 0.93 1 dollar(90)). Section 3 shows a breakdown of the cost by year. The WBS and WBS dictionary are included as an attachment to this report.

Government conceptual estimating for contracting and management

NASA Technical Reports Server (NTRS)

Brown, J. A.

1986-01-01

The use of the Aerospace Price Book, a cost index, and conceptual cost estimating for cost-effective design and construction of space facilities is discussed. The price book consists of over 200 commonly used conceptual elements and 100 systems summaries of projects such as launch pads, processing facilities, and air locks. The cost index is composed of three divisions: (1) bid summaries of major Shuttle projects, (2) budget cost data sheets, and (3) cost management summaries; each of these divisions is described. Conceptual estimates of facilities and ground support equipment are required to provide the most probable project cost for budget, funding, and project approval purposes. Similar buildings, systems, and elements already designed are located in the cost index in order to make the best rough order of magnitude conceptual estimates for development of Space Shuttle facilities. An example displaying the applicability of the conceptual cost estimating procedure for the development of the KSC facilities is presented.

Evaluation of microfabricated deformable mirror systems

NASA Astrophysics Data System (ADS)

Cowan, William D.; Lee, Max K.; Bright, Victor M.; Welsh, Byron M.

1998-09-01

This paper presents recent result for aberration correction and beam steering experiments using polysilicon surface micromachined piston micromirror arrays. Microfabricated deformable mirrors offer a substantial cost reduction for adaptive optic systems. In addition to the reduced mirror cost, microfabricated mirrors typically require low control voltages, thus eliminating high voltage amplifiers. The greatly reduced cost per channel of adaptive optic systems employing microfabricated deformable mirrors promise high order aberration correction at low cost. Arrays of piston micromirrors with 128 active elements were tested. Mirror elements are on a 203 micrometers 12 by 12 square grid. The overall array size is 2.4 mm square. The arrays were fabricated in the commercially available DARPA supported MUMPs surface micromachining foundry process. The cost per mirror array in this prototyping process is less than 200 dollars. Experimental results are presented for a hybrid correcting element comprised of a lenslet array and piston micromirror array, and for a piston micromirror array only. Also presented is a novel digital deflection micromirror which requires no digital to analog converters, further reducing the cost of adaptive optics system.

How Many Words Does a Picture Really Tell? Cross-sectional Descriptive Study of Pictogram Evaluation by Youth

PubMed Central

Korenevsky, Artyom; Vaillancourt, Régis; Pouliot, Annie; Revol, Marine; Steed, Evan; Besançon, Luc; Wahrendorf, Marit-Saskia; Patel, Jaimisha R

2013-01-01

Background Communicating health-related instructions with pictograms is useful, but such graphics can be interpreted in different ways. It is crucial to understand which pictogram components are best for accurate communication. Objectives: To catalogue pictograms used to label drugs in clinical practice; to identify the common graphic elements for defined categories of pictograms, by performing a semiotic analysis (studying how signs are perceived and how they should be designed); to identify the key graphic elements common to pictograms preferred by users; and to develop suggestions for future pictogram design on the basis of users’ input. Methods: Literature and Internet searches were performed to identify pictograms and pictogram categories. A call for pictograms was also circulated through the International Pharmaceutical Federation (FIP). Youth at a Canadian pediatric hospital were asked to rate pictograms (including storyboards and prescription labels generated by FIP pictogram software) in terms of how best they represented their intended meanings. Pictograms for which at least 80% of participants “somewhat agreed”, “agreed”, or “strongly agreed” that the graphic conveyed the intended meaning were designated as “preferred” and were selected for analysis. Elements appearing in at least 50% of these preferred pictograms were highlighted as key graphic elements for design of future pictograms. Results: In total, 21 categories were identified for pictograms used in clinical practice, and a total of 204 pictograms were analyzed. Eighty-six participants took part in the survey. For each pictogram category, certain elements were identified as “preferred” and as “key graphic elements”, whereas other elements met neither designation. For all 21 pictogram categories, at least 80% of survey respondents agreed that the FIP storyboard conveyed the intended meaning. Conclusions: Certain key, preferred graphic elements are required for pharmaceutical pictograms to convey their intended meaning. The overlap between preferred and key pictogram elements indicates that both must be considered in development of future pictograms. Redesign of existing pictograms with consideration of the best semiotic elements is in progress. PMID:23950605

Finite element modelling of the foot for clinical application: A systematic review.

PubMed

Behforootan, Sara; Chatzistergos, Panagiotis; Naemi, Roozbeh; Chockalingam, Nachiappan

2017-01-01

Over the last two decades finite element modelling has been widely used to give new insight on foot and footwear biomechanics. However its actual contribution for the improvement of the therapeutic outcome of different pathological conditions of the foot, such as the diabetic foot, remains relatively limited. This is mainly because finite element modelling has only been used within the research domain. Clinically applicable finite element modelling can open the way for novel diagnostic techniques and novel methods for treatment planning/optimisation which would significantly enhance clinical practice. In this context this review aims to provide an overview of modelling techniques in the field of foot and footwear biomechanics and to investigate their applicability in a clinical setting. Even though no integrated modelling system exists that could be directly used in the clinic and considerable progress is still required, current literature includes a comprehensive toolbox for future work towards clinically applicable finite element modelling. The key challenges include collecting the information that is needed for geometry design, the assignment of material properties and loading on a patient-specific basis and in a cost-effective and non-invasive way. The ultimate challenge for the implementation of any computational system into clinical practice is to ensure that it can produce reliable results for any person that belongs in the population for which it was developed. Consequently this highlights the need for thorough and extensive validation of each individual step of the modelling process as well as for the overall validation of the final integrated system. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Build Your Own Inventory System. Annual Cost: $100.00 (Approximate). Fixed Assets, Materials and Supplies. The Practical Elements for a Computerized, Continuing Inventory System in Schools and Use in Determining a Measure for Instructional Cost.

ERIC Educational Resources Information Center

Payne, Arnold, Comp.

This publication presents performance flow charts and other accompanying forms that are elements of an economical computerized continuing inventory system. The system described here is intended to serve school systems as an adequate fixed asset system and to provide a computerized inventory model that offers support for costs of future educational…

76 FR 6496 - Special Flight Rules Area in the Vicinity of Grand Canyon National Park, Draft Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... being considered include: Alternative A Current Condition: Key elements are corridors open year round, annual allocation cap of 93,971, and no quiet technology incentive. Current tours for helicopters and... to quiet technology aircraft. Alternative F Modified Current Condition: Key elements are similar to...

The Secret to Finland's Success: Educating Teachers. Research Brief

ERIC Educational Resources Information Center

Sahlberg, Pasi

2010-01-01

In the last decade, Finland has emerged as the leading OECD country in educational achievement. In examining the sources of Finland's dramatic rise to the top, research shows one key element that has impacted Finland's success above all others: excellent teachers. This policy brief details the key elements of Finland's successful system, examining…

Cost analysis of open radical cystectomy versus robot-assisted radical cystectomy.

PubMed

Bansal, Sukhchain S; Dogra, Tara; Smith, Peter W; Amran, Maisarah; Auluck, Ishna; Bhambra, Maninder; Sura, Manraj S; Rowe, Edward; Koupparis, Anthony

2018-03-01

To perform a cost analysis comparing the cost of robot-assisted radical cystectomy (RARC) with open RC (ORC) in a UK tertiary referral centre and to identify the key cost drivers. Data on hospital length of stay (LOS), operative time (OT), transfusion rate, and volume and complication rate were obtained from a prospectively updated institutional database for patients undergoing RARC or ORC. A cost decision tree model was created. Sensitivity analysis was performed to find key drivers of overall cost and to find breakeven points with ORC. Monte Carlo analysis was performed to quantify the variability in the dataset. One RARC procedure costs £12 449.87, or £12 106.12 if the robot was donated via charitable funds. In comparison, one ORC procedure costs £10 474.54. RARC is 18.9% more expensive than ORC. The key cost drivers were OT, LOS, and the number of cases performed per annum. High ongoing equipment costs remain a large barrier to the cost of RARC falling. However, minimal improvements in patient quality of life would be required to offset this difference. © 2017 The Authors BJU International © 2017 BJU International Published by John Wiley & Sons Ltd.

Southern Great Plains Rapid Ecoregional Assessment: pre-assessment report

USGS Publications Warehouse

Assal, Timothy J.; Melcher, Cynthia P.; Carr, Natasha B.

2015-01-01

An overview on the ecology and management issues for each Conservation Element is provided, including distribution and ecology, landscape structure and dynamics, and associated species of management concern affiliated with each Conservation Element. For each Conservation Element, effects of the Change Agents are described. An overview of potential key ecological attributes and potential Change Agents are summarized by conceptual models and tables. The tables provide an organizational framework and background information for evaluating the key ecological attributes and Change Agents in Phase II.

The economic returns of pediatric clinical trials of anti-hypertensive drugs

PubMed Central

Baker-Smith, Carissa M.; Benjamin, Daniel K.; Grabowski, Henry G.; Reid, Elizabeth D.; Mangum, Barry; Goldsmith, John V.; Murphy, M. Dianne; Edwards, Rex; Eisenstein, Eric L.; Sun, Jessica; Califf, Robert M.; Li, Jennifer S.

2012-01-01

Background Congress has authorized the U.S. Food and Drug Administration (FDA) to provide industry sponsors with a 6-month extension of drug marketing rights under the Pediatric Exclusivity Provision if FDA-requested pediatric drug trials are conducted. The cost and economic return of pediatric exclusivity to industry sponsors has been shown to be highly variable. We sought to determine the cost of performing pediatric exclusivity trials within a single therapeutic area and the subsequent economic return to industry sponsors. Methods We evaluated 9 orally administered anti-hypertensive drugs submitted to the FDA under the Pediatric Exclusivity Provision from 1997–2004 and obtained key elements of the clinical trial designs and operations. Estimates of the costs of performing the studies were generated and converted into after-tax cash outflow. Market sales were obtained and converted into after-tax inflows based on 6 months of additional patent protection. Net economic return and net return-to-cost ratios were determined for each drug. Results Of the 9 anti-hypertensive agents studied, an average of 2 studies per drug was performed, including at least 1 pharmacokinetic study and a safety and efficacy study. The median cost of completing a pharmacokinetic trial was $862,000 (range: $556,000–1.8 million). The median cost of performing safety and efficacy trials for these agents was $4.3 million (range: $2.1 million–12.9 million). The ratio of net economic return to cost was 17 (range: 4–64.7). Conclusion We found that, within a cohort of anti-hypertensive drugs, the Pediatric Exclusivity Provision has generated highly variable, yet lucrative returns to industry sponsors. PMID:18926149

A matter of definition--key elements identified in a discourse analysis of definitions of palliative care.

PubMed

Pastrana, T; Jünger, S; Ostgathe, C; Elsner, F; Radbruch, L

2008-04-01

For more than 30 years, the term "palliative care" has been used. From the outset, the term has undergone a series of transformations in its definitions and consequently in its tasks and goals. There remains a lack of consensus on a definition. The aim of this article is to analyse the definitions of palliative care in the specialist literature and to identify the key elements of palliative care using discourse analysis: a qualitative methodology. The literature search focused on definitions of the term 'palliative medicine' and 'palliative care' in the World Wide Web and medical reference books in English and German. A total of 37 English and 26 German definitions were identified and analysed. Our study confirmed the lack of a consistent meaning concerning the investigated terms, reflecting on-going discussion about the nature of the field among palliative care practitioners. Several common key elements were identified. Four main categories emerged from the discourse analysis of the definition of palliative care: target groups, structure, tasks and expertise. In addition, the theoretical principles and goals of palliative care were discussed and found to be key elements, with relief and prevention of suffering and improvement of quality of life as main goals. The identified key elements can contribute to the definition of the concept 'palliative care'. Our study confirms the importance of semantic and ethical influences on palliative care that should be considered in future research on semantics in different languages.

Thermal management and prototype testing of Compton scattering X-ray beam position monitor for the Advanced Photon Source Upgrade

NASA Astrophysics Data System (ADS)

Lee, S. H.; Yang, B. X.; Collins, J. T.; Ramanathan, M.

2017-02-01

Accurate and stable x-ray beam position monitors (XBPMs) are key elements in obtaining the desired user beam stability in the Advanced Photon Source Upgrade. In the next-generation XBPMs for the canted-undulator front ends, where two undulator beams are separated by 1.0 mrad, the lower beam power (<10 kW) per undulator allows us to explore lower-cost solutions based on Compton scattering from a diamond placed edge-on to the x-ray beam. Because of the high peak power density of the x-ray beams, this diamond experiences high temperatures and has to be clamped to a water-cooled heat spreader using thermal interface materials (TIMs), which play a key role in reducing the temperature of the diamond. To evaluate temperature changes through the interface via thermal simulations, the thermal contact resistance (TCR) of TIMs at an interface between two solid materials under even contact pressure must be known. This paper addresses the TCR measurements of several TIMs, including gold, silver, pyrolytic graphite sheet, and 3D graphene foam. In addition, a prototype of a Compton-scattering XBPM with diamond blades was installed at APS Beamline 24-ID-A in May 2015 and has been tested. This paper presents the design of the Compton-scattering XBPM, and compares thermal simulation results obtained for the diamond blade of this XBPM by the finite element method with in situ empirical measurements obtained by using reliable infrared technology.

Thermal management and prototype testing of Compton scattering X-ray beam position monitor for the Advanced Photon Source Upgrade.

PubMed

Lee, S H; Yang, B X; Collins, J T; Ramanathan, M

2017-02-01

Accurate and stable x-ray beam position monitors (XBPMs) are key elements in obtaining the desired user beam stability in the Advanced Photon Source Upgrade. In the next-generation XBPMs for the canted-undulator front ends, where two undulator beams are separated by 1.0 mrad, the lower beam power (<10 kW) per undulator allows us to explore lower-cost solutions based on Compton scattering from a diamond placed edge-on to the x-ray beam. Because of the high peak power density of the x-ray beams, this diamond experiences high temperatures and has to be clamped to a water-cooled heat spreader using thermal interface materials (TIMs), which play a key role in reducing the temperature of the diamond. To evaluate temperature changes through the interface via thermal simulations, the thermal contact resistance (TCR) of TIMs at an interface between two solid materials under even contact pressure must be known. This paper addresses the TCR measurements of several TIMs, including gold, silver, pyrolytic graphite sheet, and 3D graphene foam. In addition, a prototype of a Compton-scattering XBPM with diamond blades was installed at APS Beamline 24-ID-A in May 2015 and has been tested. This paper presents the design of the Compton-scattering XBPM, and compares thermal simulation results obtained for the diamond blade of this XBPM by the finite element method with in situ empirical measurements obtained by using reliable infrared technology.

Utilizing the Experience of Consumers in Consultation to Develop the Australasian Oncofertility Consortium Charter.

PubMed

Anazodo, Antoinette C; Gerstl, Brigitte; Stern, Catharyn J; McLachlan, Robert I; Agresta, Franca; Jayasinghe, Yasmin; Cohn, Richard J; Wakefield, Claire E; Chapman, Michael; Ledger, William; Sullivan, Elizabeth A

2016-09-01

In Australia and New Zealand, there has not been a national systematic development of oncofertility services for cancer patients of reproductive age although many cancer and fertility centers have independently developed services. A number of barriers exist to the development of these services, including a lack of clear referral pathways, a lack of communication between clinicians and patients about fertility preservation, differences in the knowledge base of clinicians about the risk of cancer treatment causing infertility and fertility preservation options, a lack of national health insurance funding covering all aspects of fertility preservation, and storage costs and cultural, religious, and ethical barriers. The development of strategies to overcome these barriers is a high priority for oncofertility care to ensure that equitable access to the best standard of care is available for all patients. The FUTuRE Fertility Research Group led a collaborative consultation process with the Australasian Oncofertility Consumer group and oncofertility specialists to explore consumers' experiences of oncofertility care. Consumers participated in qualitative focus group meetings to define and develop a model of consumer driven or informed "gold standard oncofertility care" with the aim of putting together a Charter that specifically described this. The finalized Australasian Oncofertility Consortium Charter documents eight key elements of gold standard oncofertility care that will be used to monitor the implementation of oncofertility services nationally, to ensure that these key elements are incorporated into standard practice over time.

Critical Issues and Key Points from the Survey to the Creation of the Historical Building Information Model: the Case of Santo Stefano Basilica

NASA Astrophysics Data System (ADS)

Castagnetti, C.; Dubbini, M.; Ricci, P. C.; Rivola, R.; Giannini, M.; Capra, A.

2017-05-01

The new era of designing in architecture and civil engineering applications lies in the Building Information Modeling (BIM) approach, based on a 3D geometric model including a 3D database. This is easier for new constructions whereas, when dealing with existing buildings, the creation of the BIM is based on the accurate knowledge of the as-built construction. Such a condition is allowed by a 3D survey, often carried out with laser scanning technology or modern photogrammetry, which are able to guarantee an adequate points cloud in terms of resolution and completeness by balancing both time consuming and costs with respect to the request of final accuracy. The BIM approach for existing buildings and even more for historical buildings is not yet a well known and deeply discussed process. There are still several choices to be addressed in the process from the survey to the model and critical issues to be discussed in the modeling step, particularly when dealing with unconventional elements such as deformed geometries or historical elements. The paper describes a comprehensive workflow that goes through the survey and the modeling, allowing to focus on critical issues and key points to obtain a reliable BIM of an existing monument. The case study employed to illustrate the workflow is the Basilica of St. Stefano in Bologna (Italy), a large monumental complex with great religious, historical and architectural assets.

Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application

NASA Astrophysics Data System (ADS)

Drillet, Josée; Valle, Nathalie; Iung, Thierry

2012-12-01

The current trend toward producing lighter vehicles in the automotive industry is driven by the need to conform to the new exhaust emission control regulations. This objective presents a challenge to steel manufacturers. The difficulty lies in designing new alloys with an optimum strength/formability/cost balance for the various components. Here, the key to success lies in controlling the steel microstructure and especially the phase transformations at the smallest possible scale. Among the different alloying elements, light elements such as carbon and boron are of prime importance due to their major effects on the kinetics of phase transformations. Characterization tools combining high spatial and analytical resolution such as secondary ion mass spectrometry (SIMS) and field emission gun-transmission electron microscopy (TEM) were used. In this article, the examples presented are as follows. (1) Boron segregation and precipitation effects to control hardenability in martensitic steels. (2) Local carbon distribution in advanced high-strength steels, with a specific emphasis on martensite tempering. Links have been established between the boron and carbon distribution and the formability.

Preliminary Concept of Operations for the Deep Space Array-Based Network

NASA Astrophysics Data System (ADS)

Bagri, D. S.; Statman, J. I.

2004-05-01

The Deep Space Array-Based Network (DSAN) will be an array-based system, part of a greater than 1000 times increase in the downlink/telemetry capability of the Deep Space Network. The key function of the DSAN is provision of cost-effective, robust telemetry, tracking, and command services to the space missions of NASA and its international partners. This article presents an expanded approach to the use of an array-based system. Instead of using the array as an element in the existing Deep Space Network (DSN), relying to a large extent on the DSN infrastructure, we explore a broader departure from the current DSN, using fewer elements of the existing DSN, and establishing a more modern concept of operations. For example, the DSAN will have a single 24 x 7 monitor and control (M&C) facility, while the DSN has four 24 x 7 M&C facilities. The article gives the architecture of the DSAN and its operations philosophy. It also briefly describes the customer's view of operations, operations management, logistics, anomaly analysis, and reporting.

NASA's Chemical Transfer Propulsion Program for Pathfinder

NASA Technical Reports Server (NTRS)

Hannum, Ned P.; Berkopec, Frank D.; Zurawski, Robert L.

1989-01-01

Pathfinder is a research and technology project, with specific deliverables, initiated by the National Aeronautics and Space Administration (NASA) which will strengthen the technology base of the United States civil space program in preparation for future space exploration missions. Pathfinder begins in Fiscal Year 1989, and is to advance a collection of critical technologies for these missions and ensure technology readiness for future national decisions regarding exploration of the solar system. The four major thrusts of Pathfinder are: surface exploration, in-space operations, humans-in-space, and space transfer. The space transfer thrust will provide the critical technologies needed for transportation to, and return from, the Moon, Mars, and other planets in the solar system, as well as for reliable and cost-effective Earth-orbit operations. A key element of this thrust is the Chemical Transfer Propulsion program which will provide the propulsion technology for high performance, liquid oxygen/liquid hydrogen expander cycle engines which may be operated and maintained in space. Described here are the program overview including the goals and objectives, management, technical plan, and technology transfer for the Chemical Transfer Propulsion element of Pathfinder.

Support for Students and Young Scientists to Participate in the 2009 Actinides Conference to be held in San Francisco, CA, Sunday, 12 July 2009 -- Friday, 17 July 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raymond, Kenneth N.

2011-04-08

Early career scientist were provided support to attend and participate in the Actinides 2009 (AN2009) International Conference held in San Francisco, California from 12-17 July 2011. This is the premier conference in the field of actinide chemistry, physics, and materials science of the actinide elements. Participation in the preeminent scientific meeting in actinide science keeps the U.S at the forefront of developments in this key field. The specific involvement of early career scientists combats the loss of expertise in the aforementioned critical areas related to f-element chemistry such as energy, homeland, and environmental security. Without these trained scientists, the U.S.more » will not be able to properly exploit nuclear technology to its fullest and will not be able to address its energy needs in either an environmentally safe or cost–effective manner nor will it be able to provide for its national defense. Furthermore, the early career scientists added greatly to the scientific content of the meeting and stimulates early career scientists to remain in the filed of actinide science. Providing support for participation in the AN2009 Conference via registration fee waivers, hotel cost support, and travel cost support, was extremely effective in securing the participation of early career scientists that would have not otherwise been able to attend.« less

Practical private database queries based on a quantum-key-distribution protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakobi, Markus; Humboldt-Universitaet zu Berlin, D-10117 Berlin; Simon, Christoph

2011-02-15

Private queries allow a user, Alice, to learn an element of a database held by a provider, Bob, without revealing which element she is interested in, while limiting her information about the other elements. We propose to implement private queries based on a quantum-key-distribution protocol, with changes only in the classical postprocessing of the key. This approach makes our scheme both easy to implement and loss tolerant. While unconditionally secure private queries are known to be impossible, we argue that an interesting degree of security can be achieved by relying on fundamental physical principles instead of unverifiable security assumptions inmore » order to protect both the user and the database. We think that the scope exists for such practical private queries to become another remarkable application of quantum information in the footsteps of quantum key distribution.« less

48 CFR 9904.414 - Cost accounting standard-cost of money as an element of the cost of facilities capital.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Cost accounting standard... Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING...

Cost analysis of water recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

A methodology was developed to predict the relevant contributions of the more intangible cost elements encountered in the development of flight-qualified hardware based on an extrapolation of past hardware development experience. Major items of costs within water recovery systems were identified and related to physical and/or performance criteria. Cost and performance data from Gemini, Skylab, and other aerospace and biotechnology programs were analyzed to identify major cost elements required to establish cost estimating relationships for advanced water recovery systems. The results of the study are expected to assist NASA in long-range planning and allocation of resources in a cost effective manner in support of earth orbital programs. This report deals with the cost analysis of the five leading water reclamation systems, namely: (1) RITE waste management-water system, (2) reverse osmosis system, (3) multifiltration system, (4) vapor compression system, and (5) closed air evaporation system with electrolytic pretreatment.

Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

CFRP variable curvature mirror used for realizing non-moving-element optical zoom imaging

NASA Astrophysics Data System (ADS)

Zhao, Hui; Fan, Xuewu; Pang, Zhihai; Ren, Guorui; Wang, Wei; Xie, Yongjie; Ma, Zhen; Du, Yunfei; Su, Yu; Wei, Jingxuan

2014-12-01

In recent years, how to eliminate moving elements while realizing optical zoom imaging has been paid much attention. Compared with the conventional optical zooming techniques, removing moving elements would bring in many benefits such as reduction in weight, volume and power cost and so on. The key to implement non-moving-element optical zooming lies in the design of variable curvature mirror (VCM). In order to obtain big enough optical magnification, the VCM should be capable of generating a large variation of saggitus. Hence, the mirror material should not be brittle, in other words the corresponding ultimate strength should be high enough to ensure that mirror surface would not be broken during large curvature variation. Besides that, the material should have a not too big Young's modulus because in this case less force is required to generate a deformation. Among all available materials, for instance SiC, Zerodur and et.al, CFRP (carbon fiber reinforced polymer) satisfies all these requirements and many related research have proven this. In this paper, a CFRP VCM is designed, fabricated and tested. With a diameter of 100mm, a thickness of 2mm and an initial curvature radius of 1740mm, this component could change its curvature radius from 1705mm to 1760mm, which correspond to a saggitus variation of nearly 23μm. The work reported further proves the suitability of CFRP in constructing variable curvature mirror which could generate a large variation of saggitus.

The selection criteria elements of X-ray optics system

NASA Astrophysics Data System (ADS)

Plotnikova, I. V.; Chicherina, N. V.; Bays, S. S.; Bildanov, R. G.; Stary, O.

2018-01-01

At the design of new modifications of x-ray tomography there are difficulties in the right choice of elements of X-ray optical system. Now this problem is solved by practical consideration, selection of values of the corresponding parameters - tension on an x-ray tube taking into account the thickness and type of the studied material. For reduction of time and labor input of design it is necessary to create the criteria of the choice, to determine key parameters and characteristics of elements. In the article two main elements of X-ray optical system - an x-ray tube and the detector of x-ray radiation - are considered. Criteria of the choice of elements, their key characteristics, the main dependences of parameters, quality indicators and also recommendations according to the choice of elements of x-ray systems are received.

Key Elements in Successful Training A Comparative Study of Two Workplaces. Project Report, 2000-2001.

ERIC Educational Resources Information Center

Adult Literacy and Numeracy Australian Research Consortium, Alice Springs. Northern Territory Centre.

This publication presents case studies of two sites--one with and one without a history of involvement in Workplace English Language and Literacy (WELL)-funded training programs. Case study 1, "Partnership, Flexibility, and Experience: Key Elements in Successful Training" (Jenny McGuirk), investigates a food processing company in New South Wales…

Organic memristive device as key element for neuromorphic networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erokhin, Victor

Organic memristive device has three important properties allowing to consider it as a key element of neuromorphic systems. First, its electrical properties are somehow similar to those of synapses. Second, it can be easily transferred into an oscillator. Third, organic nature of the devices allow to assemble them into stochastic 3D networks capable to learning and adaptations.

Vital Collaboratives, Alliances, and Partnerships: A Search for Key Elements of an Effective Public-Private Partnership

ERIC Educational Resources Information Center

Young, Charles Keith

2010-01-01

Owing to the significant structural changes that have occurred in the global marketplace over the past 2 decades, a corresponding increase of public-private partnerships have been established among the business sector, local governments, and public community colleges. This qualitative project sought to identify and substantiate key elements that…

How Strategic Planning Keeps You Sane when Delivering Distance Programs

ERIC Educational Resources Information Center

MacNeil, Dixie; Luzius, Kim; Dunkin, Sonya

2010-01-01

This paper details the advantages of creating a strategic plan in the development and delivery of distance programs at the authors' own institution. The steps involved in the planning process and the three key elements of a successful strategic plan are addressed. The key elements include a program plan explaining the roles/responsibilities of…

Sunk cost and work ethic effects reflect suboptimal choice between different work requirements.

PubMed

Magalhães, Paula; White, K Geoffrey

2013-03-01

We investigated suboptimal choice between different work requirements in pigeons (Columba livia), namely the sunk cost effect, an irrational tendency to persist with an initial investment, despite the availability of a better option. Pigeons chose between two keys, one with a fixed work requirement to food of 20 pecks (left key), and the other with a work requirement to food which varied across conditions (center key). On some trials within each session, such choices were preceded by an investment of 35 pecks on the center key, whereas on others they were not. On choice trials preceded by the investment, the pigeons tended to stay and complete the schedule associated with the center key, even when the number of pecks to obtain reward was greater than for the concurrently available left key. This result indicates that pigeons, like humans, commit the sunk cost effect. With higher work requirements, this preference was extended to trials where there was no initial investment, so an overall preference for the key associated with more work was evident, consistent with the work ethic effect. We conclude that a more general work ethic effect is amplified by the effect of the prior investment, that is, the sunk cost effect. Copyright © 2013 Elsevier B.V. All rights reserved.

Key node selection in minimum-cost control of complex networks

NASA Astrophysics Data System (ADS)

Ding, Jie; Wen, Changyun; Li, Guoqi

2017-11-01

Finding the key node set that is connected with a given number of external control sources for driving complex networks from initial state to any predefined state with minimum cost, known as minimum-cost control problem, is critically important but remains largely open. By defining an importance index for each node, we propose revisited projected gradient method extension (R-PGME) in Monte-Carlo scenario to determine key node set. It is found that the importance index of a node is strongly correlated to occurrence rate of that node to be selected as a key node in Monte-Carlo realizations for three elementary topologies, Erdős-Rényi and scale-free networks. We also discover the distribution patterns of key nodes when the control cost reaches its minimum. Specifically, the importance indices of all nodes in an elementary stem show a quasi-periodic distribution with high peak values in the beginning and end of a quasi-period while they approach to a uniform distribution in an elementary cycle. We further point out that an elementary dilation can be regarded as two elementary stems whose lengths are the closest, and the importance indices in each stem present similar distribution as in an elementary stem. Our results provide a better understanding and deep insight of locating the key nodes in different topologies with minimum control cost.

Wireless spread-spectrum telesensor chip with synchronous digital architecture

DOEpatents

Smith, Stephen F.; Turner, Gary W.; Wintenberg, Alan L.; Emery, Michael Steven

2005-03-08

A fully integrated wireless spread-spectrum sensor incorporating all elements of an "intelligent" sensor on a single circuit chip is capable of telemetering data to a receiver. Synchronous control of all elements of the chip provides low-cost, low-noise, and highly robust data transmission, in turn enabling the use of low-cost monolithic receivers.

INFORMAS (International Network for Food and Obesity/non-communicable diseases Research, Monitoring and Action Support): summary and future directions.

PubMed

Kumanyika, S

2013-10-01

This supplement presents the foundational elements for INFORMAS (International Network for Food and Obesity/non-communicable diseases Research, Monitoring and Action Support). As explained in the overview article by Swinburn and colleagues, INFORMAS has a compelling rationale and has set forth clear objectives, outcomes, principles and frameworks for monitoring and benchmarking key aspects of food environments and the policies and actions that influence the healthiness of food environments. This summary highlights the proposed monitoring approaches for the 10 interrelated INFORMAS modules: public and private sector policies and actions; key aspects of food environments (food composition, labelling, promotion, provision, retail, prices, and trade and investment) and population outcomes (diet quality). This ambitious effort should be feasible when approached in a step-wise manner, taking into account existing monitoring efforts, data sources, country contexts and capacity, and when adequately resourced. After protocol development and pilot testing of the modules, INFORMAS aims to be a sustainable, low-cost monitoring framework. Future directions relate to institutionalization, implementation and, ultimately, to leveraging INFORMAS data in ways that will bring key drivers of food environments into alignment with public health goals. © 2013 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of the International Association for the Study of Obesity.

Defining resilience within a risk-informed assessment framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coles, Garill A.; Unwin, Stephen D.; Holter, Gregory M.

2011-08-01

The concept of resilience is the subject of considerable discussion in academic, business, and governmental circles. The United States Department of Homeland Security for one has emphasised the need to consider resilience in safeguarding critical infrastructure and key resources. The concept of resilience is complex, multidimensional, and defined differently by different stakeholders. The authors contend that there is a benefit in moving from discussing resilience as an abstraction to defining resilience as a measurable characteristic of a system. This paper proposes defining resilience measures using elements of a traditional risk assessment framework to help clarify the concept of resilience andmore » as a way to provide non-traditional risk information. The authors show various, diverse dimensions of resilience can be quantitatively defined in a common risk assessment framework based on the concept of loss of service. This allows the comparison of options for improving the resilience of infrastructure and presents a means to perform cost-benefit analysis. This paper discusses definitions and key aspects of resilience, presents equations for the risk of loss of infrastructure function that incorporate four key aspects of resilience that could prevent or mitigate that loss, describes proposed resilience factor definitions based on those risk impacts, and provides an example that illustrates how resilience factors would be calculated using a hypothetical scenario.« less

A Vehicle Steering Recognition System Based on Low-Cost Smartphone Sensors.

PubMed

Liu, Xinhua; Mei, Huafeng; Lu, Huachang; Kuang, Hailan; Ma, Xiaolin

2017-03-20

Recognizing how a vehicle is steered and then alerting drivers in real time is of utmost importance to the vehicle and driver's safety, since fatal accidents are often caused by dangerous vehicle maneuvers, such as rapid turns, fast lane-changes, etc. Existing solutions using video or in-vehicle sensors have been employed to identify dangerous vehicle maneuvers, but these methods are subject to the effects of the environmental elements or the hardware is very costly. In the mobile computing era, smartphones have become key tools to develop innovative mobile context-aware systems. In this paper, we present a recognition system for dangerous vehicle steering based on the low-cost sensors found in a smartphone: i.e., the gyroscope and the accelerometer. To identify vehicle steering maneuvers, we focus on the vehicle's angular velocity, which is characterized by gyroscope data from a smartphone mounted in the vehicle. Three steering maneuvers including turns, lane-changes and U-turns are defined, and a vehicle angular velocity matching algorithm based on Fast Dynamic Time Warping (FastDTW) is adopted to recognize the vehicle steering. The results of extensive experiments show that the average accuracy rate of the presented recognition reaches 95%, which implies that the proposed smartphone-based method is suitable for recognizing dangerous vehicle steering maneuvers.

Patient-Centered Specialty Practice: Defining the Role of Specialists in Value-Based Health Care.

PubMed

Ward, Lawrence; Powell, Rhea E; Scharf, Michael L; Chapman, Andrew; Kavuru, Mani

2017-04-01

Health care is at a crossroads and under pressure to add value by improving patient experience and health outcomes and reducing costs to the system. Efforts to improve the care model in primary care, such as the patient-centered medical home, have enjoyed some success. However, primary care accounts for only a small portion of total health-care spending, and there is a need for policies and frameworks to support high-quality, cost-efficient care in specialty practices of the medical neighborhood. The Patient-Centered Specialty Practice (PCSP) model offers ambulatory-based specialty practices one such framework, supported by a formal recognition program through the National Committee for Quality Assurance. The key elements of the PCSP model include processes to support timely access to referral requests, improved communication and coordination with patients and referring clinicians, reduced unnecessary and duplicative testing, and an emphasis on continuous measurement of quality, safety, and performance improvement for a population of patients. Evidence to support the model remains limited, and estimates of net costs and value to practices are not fully understood. The PCSP model holds promise for promoting value-based health care in specialty practices. The continued development of appropriate incentives is required to ensure widespread adoption. Copyright © 2017. Published by Elsevier Inc.

National Built Environment Health Impact Assessment Model ...

EPA Pesticide Factsheets

Behavioral (activity, diet, social interaction) and exposure (air pollution, traffic injury, and noise) related health impacts of land use and transportation investment decisions are becoming better understood and quantified. Research has shown relationships between density, mix, street connectivity, access to parks, shops, transit, presence of sidewalks and bikeways, and healthy food with physical activity, obesity, cardiovascular disease, type II diabetes, and some mental health outcomes. This session demonstrates successful integration of health impact assessment into multiple scenario planning tool platforms. Detailed evidence on chronic disease and related costs associated with contrasting land use and transportation investments are built into a general-purpose module that can be accessed by multiple platforms. Funders, researchers, and end users of the tool will present a detailed description of the key elements of the approach, how it has been applied, and how will evolve. A critical focus will be placed on equity and social justice inherent within the assessment of health disparities that will be featured in the session. Health impacts of community design have significant cost benefit implications. Recent research is now extending relationships between community design features and chronic disease to health care costs. This session will demonstrate the recent application of this evidence on health impacts to the newly adopted Los Angeles Regional Transpo

A Vehicle Steering Recognition System Based on Low-Cost Smartphone Sensors

PubMed Central

Liu, Xinhua; Mei, Huafeng; Lu, Huachang; Kuang, Hailan; Ma, Xiaolin

2017-01-01

Recognizing how a vehicle is steered and then alerting drivers in real time is of utmost importance to the vehicle and driver’s safety, since fatal accidents are often caused by dangerous vehicle maneuvers, such as rapid turns, fast lane-changes, etc. Existing solutions using video or in-vehicle sensors have been employed to identify dangerous vehicle maneuvers, but these methods are subject to the effects of the environmental elements or the hardware is very costly. In the mobile computing era, smartphones have become key tools to develop innovative mobile context-aware systems. In this paper, we present a recognition system for dangerous vehicle steering based on the low-cost sensors found in a smartphone: i.e., the gyroscope and the accelerometer. To identify vehicle steering maneuvers, we focus on the vehicle’s angular velocity, which is characterized by gyroscope data from a smartphone mounted in the vehicle. Three steering maneuvers including turns, lane-changes and U-turns are defined, and a vehicle angular velocity matching algorithm based on Fast Dynamic Time Warping (FastDTW) is adopted to recognize the vehicle steering. The results of extensive experiments show that the average accuracy rate of the presented recognition reaches 95%, which implies that the proposed smartphone-based method is suitable for recognizing dangerous vehicle steering maneuvers. PMID:28335540

Inverter Circuits Using ZnO Nanoparticle Based Thin-Film Transistors for Flexible Electronic Applications

PubMed Central

Vidor, Fábio F.; Meyers, Thorsten; Hilleringmann, Ulrich

2016-01-01

Innovative systems exploring the flexibility and the transparency of modern semiconducting materials are being widely researched by the scientific community and by several companies. For a low-cost production and large surface area applications, thin-film transistors (TFTs) are the key elements driving the system currents. In order to maintain a cost efficient integration process, solution based materials are used as they show an outstanding tradeoff between cost and system complexity. In this paper, we discuss the integration process of ZnO nanoparticle TFTs using a high-k resin as gate dielectric. The performance in dependence on the transistor structure has been investigated, and inverted staggered setups depict an improved performance over the coplanar device increasing both the field-effect mobility and the ION/IOFF ratio. Aiming at the evaluation of the TFT characteristics for digital circuit applications, inverter circuits using a load TFT in the pull-up network and an active TFT in the pull-down network were integrated. The inverters show reasonable switching characteristics and V/V gains. Conjointly, the influence of the geometry ratio and the supply voltage on the devices have been analyzed. Moreover, as all integration steps are suitable to polymeric templates, the fabrication process is fully compatible to flexible substrates. PMID:28335282

Inverter Circuits Using ZnO Nanoparticle Based Thin-Film Transistors for Flexible Electronic Applications.

PubMed

Vidor, Fábio F; Meyers, Thorsten; Hilleringmann, Ulrich

2016-08-23

Innovative systems exploring the flexibility and the transparency of modern semiconducting materials are being widely researched by the scientific community and by several companies. For a low-cost production and large surface area applications, thin-film transistors (TFTs) are the key elements driving the system currents. In order to maintain a cost efficient integration process, solution based materials are used as they show an outstanding tradeoff between cost and system complexity. In this paper, we discuss the integration process of ZnO nanoparticle TFTs using a high- k resin as gate dielectric. The performance in dependence on the transistor structure has been investigated, and inverted staggered setups depict an improved performance over the coplanar device increasing both the field-effect mobility and the I ON / I OFF ratio. Aiming at the evaluation of the TFT characteristics for digital circuit applications, inverter circuits using a load TFT in the pull-up network and an active TFT in the pull-down network were integrated. The inverters show reasonable switching characteristics and V / V gains. Conjointly, the influence of the geometry ratio and the supply voltage on the devices have been analyzed. Moreover, as all integration steps are suitable to polymeric templates, the fabrication process is fully compatible to flexible substrates.

Key ingredients of anti-stigma programs for health care providers: a data synthesis of evaluative studies.

PubMed

Knaak, Stephanie; Modgill, Geeta; Patten, Scott B

2014-10-01

As part of its ongoing effort to combat stigma against mental illness among health care providers, the Mental Health Commission of Canada partnered with organizations conducting anti-stigma interventions. Our objective was to evaluate program effectiveness and to better understand what makes some programs more effective than others. Our paper reports the elements of these programs found to be most strongly associated with favourable outcomes. Our study employed a multi-phased, mixed-methods design. First, a grounded theory qualitative study was undertaken to identify key program elements. Next, each program (n = 22) was coded according to the presence or absence of the identified key program ingredients. Then, random-effects, meta-regression modelling was used to examine the association between program outcomes and the key ingredients. The qualitative analysis led to a 6-ingredient model of key program elements. Results of the quantitative analysis showed that programs that included all 6 of these ingredients performed significantly better than those that did not. Individual analyses of each of the 6 ingredients showed that including multiple forms of social contact and emphasizing recovery were characteristics of the most effective programs. The results provide a validation of a 6-ingredient model of key program elements for anti-stigma programming for health care providers. Emphasizing recovery and including multiple types of social contact are of particular importance for maximizing the effectiveness of anti-stigma programs for health care providers.

Membrane-mirror-based autostereoscopic display for tele-operation and teleprescence applications

NASA Astrophysics Data System (ADS)

McKay, Stuart; Mair, Gordon M.; Mason, Steven; Revie, Kenneth

2000-05-01

An autostereoscopic display for telepresence and tele- operation applications has been developed at the University of Strathclyde in Glasgow, Scotland. The research is a collaborative effort between the Imaging Group and the Transparent Telepresence Research Group, both based at Strathclyde. A key component of the display is the directional screen; a 1.2-m diameter Stretchable Membrane Mirror is currently used. This patented technology enables large diameter, small f No., mirrors to be produced at a fraction of the cost of conventional optics. Another key element of the present system is an anthropomorphic and anthropometric stereo camera sensor platform. Thus, in addition to mirror development, research areas include sensor platform design focused on sight, hearing, research areas include sensor platform design focused on sight, hearing, and smell, telecommunications, display systems for all visual, aural and other senses, tele-operation, and augmented reality. The sensor platform is located at the remote site and transmits live video to the home location. Applications for this technology are as diverse as they are numerous, ranging from bomb disposal and other hazardous environment applications to tele-conferencing, sales, education and entertainment.

Aerodynamics of the advanced launch system (ALS) propulsion and avionics (P/A) module

NASA Technical Reports Server (NTRS)

Ferguson, Stan; Savage, Dick

1992-01-01

This paper discusses the design and testing of candidate Advanced Launch System (ALS) Propulsion and Avionics (P/A) Module configurations. The P/A Module is a key element of future launch systems because it is essential to the recovery and reuse of high-value propulsion and avionics hardware. The ALS approach involves landing of first stage (booster) and/or second stage (core) P/A modules near the launch site to minimize logistics and refurbishment cost. The key issue addressed herein is the aerodynamic design of the P/A module, including the stability characteristics and the lift-to-drag (L/D) performance required to achieve the necessary landing guidance accuracy. The reference P/A module configuration was found to be statically stable for the desired flight regime, to provide adequate L/D for targeting, and to have effective modulation of the L/D performance using a body flap. The hypersonic aerodynamic trends for nose corner radius, boattail angle and body flap deflections were consistent with pretest predictions. However, the levels for the L/D and axial force for hypersonic Mach numbers were overpredicted by impact theories.

Radio frequency identification: the big role player in health care management.

PubMed

Mehrjerdi, Yahia Zare

2011-01-01

This paper seeks to review the fundamental concepts of radio frequency identification (RFID) and to discuss the fact that the road to success for healthcare systems is the thorough management of patients, employees, equipment, medications, and records throughout the industry. Thereafter, it aims to prepare a deep review of the technology, study seven new cases on the topic of healthcare management and deliver a broad applications area thereof. The paper identifies key elements of RFID through the review of healthcare management literature and case studies. For this purpose, seven cases from the healthcare industry are reviewed to demonstrate the extent of the applications of RFID in this area. To make healthcare management systems functional and successfully operational, RFID solutions can be used to reduce operating costs through management of patients, employees, equipment, medications, and records to improve tracking and tracing, and preventing the lost of resources under any circumstances. This paper delivers a review of RFID on the healthcare industry. For this reason, the basic and key point on RFID technology is discussed and seven cases from the literature are reviewed.

Ubiquitous Low-Cost Functionalized Multi-Walled Carbon Nanotube Sensors for Distributed Methane Leak Detection

DOE PAGES

Humayun, Md Tanim; Divan, Ralu; Stan, Liliana; ...

2016-06-16

This paper presents a highly sensitive, energy efficient and low-cost distributed methane (CH 4) sensor system (DMSS) for continuous monitoring, detection, and localization of CH 4 leaks in natural gas infrastructure, such as transmission and distribution pipelines, wells, and production pads. The CH 4 sensing element, a key component of the DMSS, consists of a metal oxide nanocrystal (MONC) functionalized multi-walled carbon nanotube (MWCNT) mesh which, in comparison to existing literature, shows stronger relative resistance change while interacting with lower parts per million (ppm) concentration of CH 4. A Gaussian plume triangulation algorithm has been developed for the DMSS. Givenmore » a geometric model of the surrounding environment the algorithm can precisely detect and localize a CH 4 leak as well as estimate its mass emission rate. A UV-based surface recovery technique making the sensor recover 10 times faster than the reported ones is presented for the DMSS. In conclusion, a control algorithm based on the UV-accelerated recovery is developed which facilitates faster leak detection.« less

Implementation of electrochemical elements for an alternative detection of ochratoxin A

NASA Astrophysics Data System (ADS)

Aristizabal, D. H.; Giraldo, D. A.; Sanchez, S.; Taborda, G.; Baeza, A.

2017-01-01

Ochratoxin A (OTA) is a nephrotoxic metabolite, hepatotoxic and carcinogenic produced mainly by Aspergillus and Penicillium fungi. Usually, the mycotoxin analysed through the technique of high performance liquid chromatography. This method is expensive and takes a lot of time. Therefore, expected to automate a device of low cost, minimal instrumentation micropolarographic (MIMP) for the analysis. For this purpose, the right programming environment and the manufacturing of the software for the graphical user interface selected automation of the MIMP through the design and simulation of the circuit, imprint and assembled in a container with connection ports. Lastly, validation and analysis of Ochratoxin A by cyclic voltammetry from analogous MIMP, automatic MIMP and a potentiostat, in order to corroborate the registered data. This way, voltammetry analysis of coumarin is obtained and the simulation of the MIMP electric circuit. Therefore, this are the key data during the investigation, because the molecule of OTA can be monitored through an acid hydrolysis of amides, composed by a phenylalanine and coumaric acid group, generating the significant decrease in the costs and time of analysis.

Dynamic cellular manufacturing system considering machine failure and workload balance

NASA Astrophysics Data System (ADS)

Rabbani, Masoud; Farrokhi-Asl, Hamed; Ravanbakhsh, Mohammad

2018-02-01

Machines are a key element in the production system and their failure causes irreparable effects in terms of cost and time. In this paper, a new multi-objective mathematical model for dynamic cellular manufacturing system (DCMS) is provided with consideration of machine reliability and alternative process routes. In this dynamic model, we attempt to resolve the problem of integrated family (part/machine cell) formation as well as the operators' assignment to the cells. The first objective minimizes the costs associated with the DCMS. The second objective optimizes the labor utilization and, finally, a minimum value of the variance of workload between different cells is obtained by the third objective function. Due to the NP-hard nature of the cellular manufacturing problem, the problem is initially validated by the GAMS software in small-sized problems, and then the model is solved by two well-known meta-heuristic methods including non-dominated sorting genetic algorithm and multi-objective particle swarm optimization in large-scaled problems. Finally, the results of the two algorithms are compared with respect to five different comparison metrics.

Autonomous Aerobraking Development Software: Phase 2 Summary

NASA Technical Reports Server (NTRS)

Cianciolo, Alicia D.; Maddock, Robert W.; Prince, Jill L.; Bowes, Angela; Powell, Richard W.; White, Joseph P.; Tolson, Robert; O'Shaughnessy, Daniel; Carrelli, David

2013-01-01

NASA has used aerobraking at Mars and Venus to reduce the fuel required to deliver a spacecraft into a desired orbit compared to an all-propulsive solution. Although aerobraking reduces the propellant, it does so at the expense of mission duration, large staff, and DSN coverage. These factors make aerobraking a significant cost element in the mission design. By moving on-board the current ground-based tasks of ephemeris determination, atmospheric density estimation, and maneuver sizing and execution, a flight project would realize significant cost savings. The NASA Engineering and Safety Center (NESC) sponsored Phase 1 and 2 of the Autonomous Aerobraking Development Software (AADS) study, which demonstrated the initial feasibility of moving these current ground-based functions to the spacecraft. This paper highlights key state-of-the-art advancements made in the Phase 2 effort to verify that the AADS algorithms are accurate, robust and ready to be considered for application on future missions that utilize aerobraking. The advancements discussed herein include both model updates and simulation and benchmark testing. Rigorous testing using observed flight atmospheres, operational environments and statistical analysis characterized the AADS operability in a perturbed environment.

Bridging a divide: architecture for a joint hospital-primary care data warehouse.

PubMed

An, Jeff; Keshavjee, Karim; Mirza, Kashif; Vassanji, Karim; Greiver, Michelle

2015-01-01

Healthcare costs are driven by a surprisingly small number of patients. Predicting who is likely to require care in the near future could help reduce costs by pre-empting use of expensive health care resources such as emergency departments and hospitals. We describe the design of an architecture for a joint hospital-primary care data warehouse (JDW) that can monitor the effectiveness of in-hospital interventions in reducing readmissions and predict which patients are most likely to be admitted to hospital in the near future. The design identifies the key governance elements, the architectural principles, the business case, the privacy architecture, future work flows, the IT infrastructure, the data analytics and the high level implementation plan for realization of the JDW. This architecture fills a gap in bridging data from two separate hospital and primary care organizations, not a single managed care entity with multiple locations. The JDW architecture design was well received by the stakeholders engaged and by senior leadership at the hospital and the primary care organization. Future plans include creating a demonstration system and conducting a pilot study.

Emerging, Photonic Based Technologies for NASA Space Communications Applications

NASA Technical Reports Server (NTRS)

Pouch, John; Nguyen, Hung; Lee, Richard; Levi, Anthony; Bos, Philip; Titus, Charles; Lavrentovich, Oleg

2002-01-01

An objective of NASA's Computing, Information, and Communications Technology program is to support the development of technologies that could potentially lower the cost of the Earth science and space exploration missions, and result in greater scientific returns. NASA-supported photonic activities which will impact space communications will be described. The objective of the RF microphotonic research is to develop a Ka-band receiver that will enable the microwaves detected by an antenna to modulate a 1.55- micron optical carrier. A key element is the high-Q, microphotonic modulator that employs a lithium niobate microdisk. The technical approach could lead to new receivers that utilize ultra-fast, photonic signal processing techniques, and are low cost, compact, low weight and power efficient. The progress in the liquid crystal (LC) beam steering research will also be reported. The predicted benefits of an LC-based device on board a spacecraft include non-mechanical, submicroradian laser-beam pointing, milliradian scanning ranges, and wave-front correction. The potential applications of these emerging technologies to the various NASA missions will be presented.

Cost Differential Analysis: Providing Data for Added Cost Funding

ERIC Educational Resources Information Center

Nystrom, Dennis C.; Hennessy, James V.

1975-01-01

A 1972-73 statewide study conducted in Illinois to develop a cost accounting system which facilitates cost differential ratios for secondary vocational education courses indicated that vocational programs are approximately twice as expensive as nonvocational. Specific cost elements identified in the study provided essential information regarding…

IUS/TUG orbital operations and mission support study. Volume 5: Cost estimates

NASA Technical Reports Server (NTRS)

1975-01-01

The costing approach, methodology, and rationale utilized for generating cost data for composite IUS and space tug orbital operations are discussed. Summary cost estimates are given along with cost data initially derived for the IUS program and space tug program individually, and cost estimates for each work breakdown structure element.

Cost considerations for long-term ecological monitoring

USGS Publications Warehouse

Caughlan, L.; Oakley, K.L.

2001-01-01

For an ecological monitoring program to be successful over the long-term, the perceived benefits of the information must justify the cost. Financial limitations will always restrict the scope of a monitoring program, hence the program’s focus must be carefully prioritized. Clearly identifying the costs and benefits of a program will assist in this prioritization process, but this is easier said than done. Frequently, the true costs of monitoring are not recognized and are, therefore, underestimated. Benefits are rarely evaluated, because they are difficult to quantify. The intent of this review is to assist the designers and managers of long-term ecological monitoring programs by providing a general framework for building and operating a cost-effective program. Previous considerations of monitoring costs have focused on sampling design optimization. We present cost considerations of monitoring in a broader context. We explore monitoring costs, including both budgetary costs, what dollars are spent on, and economic costs, which include opportunity costs. Often, the largest portion of a monitoring program budget is spent on data collection, and other, critical aspects of the program, such as scientific oversight, training, data management, quality assurance, and reporting, are neglected. Recognizing and budgeting for all program costs is therefore a key factor in a program’s longevity. The close relationship between statistical issues and cost is discussed, highlighting the importance of sampling design, replication and power, and comparing the costs of alternative designs through pilot studies and simulation modeling. A monitoring program development process that includes explicit checkpoints for considering costs is presented. The first checkpoint occurs during the setting of objectives and during sampling design optimization. The last checkpoint occurs once the basic shape of the program is known, and the costs and benefits, or alternatively the cost-effectiveness, of each program element can be evaluated. Moving into the implementation phase without careful evaluation of costs and benefits is risky because if costs are later found to exceed benefits, the program will fail. The costs of development, which can be quite high, will have been largely wasted. Realistic expectations of costs and benefits will help ensure that monitoring programs survive the early, turbulent stages of development and the challenges posed by fluctuating budgets during implementation.

Identifying inaccuracy of MS Project using system analysis

NASA Astrophysics Data System (ADS)

Fachrurrazi; Husin, Saiful; Malahayati, Nurul; Irzaidi

2018-05-01

The problem encountered in project owner’s financial accounting report is the difference in total project costs of MS Project to the Indonesian Standard (Standard Indonesia Standard / Cost Estimating Standard Book of Indonesia). It is one of the MS Project problems concerning to its cost accuracy, so cost data cannot be used in an integrated way for all project components. This study focuses on finding the causes of inaccuracy of the MS Projects. The aim of this study, which is operationally, are: (i) identifying cost analysis procedures for both current methods (SNI) and MS Project; (ii) identifying cost bias in each element of the cost analysis procedure; and (iii) analysing the cost differences (cost bias) in each element to identify what the cause of inaccuracies in MS Project toward SNI is. The method in this study is comparing for both the system analysis of MS Project and SNI. The results are: (i) MS Project system in Work of Resources element has limitation for two decimal digits only, have led to its inaccuracy. Where the Work of Resources (referred to as effort) in MS Project represents multiplication between the Quantities of Activities and Requirements of resources in SNI; (ii) MS Project and SNI have differences in the costing methods (the cost estimation methods), in which the SNI uses the Quantity-Based Costing (QBC), meanwhile MS Project uses the Time-Based Costing (TBC). Based on this research, we recommend to the contractors who use SNI should make an adjustment for Work of Resources in MS Project (with correction index) so that it can be used in an integrated way to the project owner’s financial accounting system. Further research will conduct for improvement the MS Project as an integrated tool toward all part of the project participant.

Effectiveness and micro-costing of the KiVa school-based bullying prevention programme in Wales: study protocol for a pragmatic definitive parallel group cluster randomised controlled trial.

PubMed

Clarkson, Suzy; Axford, Nick; Berry, Vashti; Edwards, Rhiannon Tudor; Bjornstad, Gretchen; Wrigley, Zoe; Charles, Joanna; Hoare, Zoe; Ukoumunne, Obioha C; Matthews, Justin; Hutchings, Judy

2016-02-01

Bullying refers to verbal, physical or psychological aggression repeated over time that is intended to cause harm or distress to the victims who are unable to defend themselves. It is a key public health priority owing to its widespread prevalence in schools and harmful short- and long-term effects on victims' well-being. There is a need to strengthen the evidence base by testing innovative approaches to preventing bullying. KiVa is a school-based bullying prevention programme with universal and indicated elements and an emphasis on changing bystander behaviour. It achieved promising results in a large trial in Finland, and now requires testing in other countries. This paper describes the protocol for a cluster randomised controlled trial (RCT) of KiVa in Wales. The study uses a two-arm waitlist control pragmatic definitive parallel group cluster RCT design with an embedded process evaluation and calculation of unit cost. Participating schools will be randomised a using a 1:1 ratio to KiVa plus usual provision (intervention group) or usual provision only (control group). The trial has one primary outcome, child self-reported victimisation from bullying, dichotomised as 'victimised' (bullied at least twice a month in the last couple of months) versus 'not victimised'. Secondary outcomes are: bullying perpetration; aspects of child social and emotional well-being (including emotional problems, conduct, peer relations, prosocial behaviour); and school attendance. Follow-up is at 12 months post-baseline. Implementation fidelity is measured through teacher-completed lesson records and independent school-wide observation. A micro-costing analysis will determine the costs of implementing KiVa, including recurrent and non-recurrent unit costs. Factors related to the scalability of the programme will be examined in interviews with head teachers and focus groups with key stakeholders in the implementation of school-based bullying interventions. The results from this trial will provide evidence on whether the KiVa programme is transportable from Finland to Wales in terms of effectiveness and implementation. It will provide information about the costs of delivery and generate insights into factors related to the scalability of the programme. Current Controlled Trials ISRCTN23999021 Date 10-6-13.

Impact of Balance Of System (BOS) costs on photovoltaic power systems

NASA Technical Reports Server (NTRS)

Hein, G. F.; Cusick, J. P.; Poley, W. A.

1978-01-01

The Department of Energy has developed a program to effect a large reduction in the price of photovoltaic modules, with significant progress already achieved toward the 1986 goal of 50 cents/watt (1975 dollars). Remaining elements of a P/V power system (structure, battery storage, regulation, control, and wiring) are also significant cost items. The costs of these remaining elements are commonly referred to as Balance-of-System (BOS) costs. The BOS costs are less well defined and documented than module costs. The Lewis Research Center (LeRC) in 1976/77 and with two village power experiments that will be installed in 1978. The costs were divided into five categories and analyzed. A regression analysis was performed to determine correlations of BOS Costs per peak watt, with power size for these photovoltaic systems. The statistical relationship may be used for flat-plate, DC systems ranging from 100 to 4,000 peak watts. A survey of suppliers was conducted for comparison with the predicted BOS cost relationship.

Monitoring Progress and Adherence with Positive Airway Pressure Therapy for Obstructive Sleep Apnea: The Roles of Telemedicine and Mobile Health Applications.

PubMed

Hwang, Dennis

2016-06-01

Technology is changing the way health care is delivered and how patients are approaching their own health. Given the challenge within sleep medicine of optimizing adherence to continuous positive airway pressure (CPAP) therapy in patients with obstructive sleep apnea (OSA), implementation of telemedicine-based mechanisms is a critical component toward developing a comprehensive and cost-effective solution for OSA management. Key elements include the use of electronic messaging, remote monitoring, automated care mechanisms, and patient self-management platforms. Current practical sleep-related telemedicine platforms include Web-based educational programs, automated CPAP follow-up platforms that promote self-management, and peer-based patient-driven Internet support forums. Copyright © 2016 Elsevier Inc. All rights reserved.

Automatic contact in DYNA3D for vehicle crashworthiness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whirley, R.G.; Engelmann, B.E.

1993-07-15

This paper presents a new formulation for the automatic definition and treatment of mechanical contact in explicit nonlinear finite element analysis. Automatic contact offers the benefits of significantly reduced model construction time and fewer opportunities for user error, but faces significant challenges in reliability and computational costs. This paper discusses in detail a new four-step automatic contact algorithm. Key aspects of the proposed method include automatic identification of adjacent and opposite surfaces in the global search phase, and the use of a smoothly varying surface normal which allows a consistent treatment of shell intersection and corner contact conditions without ad-hocmore » rules. The paper concludes with three examples which illustrate the performance of the newly proposed algorithm in the public DYNA3D code.« less

India's pharmaceutical industry: hype or high tech take-off?

PubMed

Malhotra, Prabodh; Lofgren, Hans

2004-11-08

India has built a large pharmaceutical industry through an array of measures in support of domestic firms. The absence of product patents enabled Indian companies to become world leading producers of generic versions of patented drugs. Low costs and a strong engineering tradition continue to sustain competitive strength. The implementation of the World Trade Organization patent regime in 2005 is driving a transformation of the industry. Key elements of the present shake-up include the return of 'big pharma' companies on a large scale and the emergence of several Indian firms that aim to become fully-fledged research-based multinationals. This article provides a description of the development and structure of the Indian pharmaceutical industry and explores questions and challenges arising from its integration into global markets.

Surface micromachined MEMS deformable mirror based on hexagonal parallel-plate electrostatic actuator

NASA Astrophysics Data System (ADS)

Ma, Wenying; Ma, Changwei; Wang, Weimin

2018-03-01

Deformable mirrors (DM) based on microelectromechanical system (MEMS) technology are being applied in adaptive optics (AO) system for astronomical telescopes and human eyes more and more. In this paper a MEMS DM with hexagonal actuator is proposed and designed. The relationship between structural design and performance parameters, mainly actuator coupling, is analyzed carefully and calculated. The optimum value of actuator coupling is obtained. A 7-element DM prototype is fabricated using a commercial available standard three-layer polysilicon surface multi-user-MEMS-processes (PolyMUMPs). Some key performances, including surface figure and voltage-displacement curve, are measured through a 3D white light profiler. The measured performances are very consistent with the theoretical values. The proposed DM will benefit the miniaturization of AO systems and lower their cost.

Repeated unit cell (RUC) approach for pure bending analysis of coronary stents.

PubMed

Ju, Feng; Xia, Zihui; Zhou, Chuwei

2008-08-01

Flexibility is one of the key properties of coronary stents. The objective of this paper is to characterize the bending behaviour of stents through finite element analysis with repeated unit cell (RUC) models. General periodic boundary conditions for the RUC under the pure bending condition are formulated. It is found that the proposed RUC approach can provide accurate numerical results of bending behaviour of stents with much less computational costs. Bending stiffness, post-yield bending behaviour and the relationship between moment and bending curvature are investigated for Palmaz-Schatz stents and stents with the V- and S-shaped links. It is found that the effect of link geometry on the bending behaviour of stent is significant. The behaviour of stents subjected to cyclic bending is also investigated.

The group employed model as a foundation for health care delivery reform.

PubMed

Minott, Jenny; Helms, David; Luft, Harold; Guterman, Stuart; Weil, Henry

2010-04-01

With a focus on delivering low-cost, high-quality care, several organizations using the group employed model (GEM)-with physician groups whose primary and specialty care physicians are salaried or under contract-have been recognized for creating a culture of patient-centeredness and accountability, even in a toxic fee-for-service environment. The elements that leaders of such organizations identify as key to their success are physician leadership that promotes trust in the organization, integration that promotes teamwork and coordination, governance and strategy that drive results, transparency and health information technology that drive continual quality improvement, and a culture of accountability that focuses providers on patient needs and responsibility for effective care and efficient use of resources. These organizations provide important lessons for health care delivery system reform.

A Framework for Enhancing the Value of Research for Dissemination and Implementation

PubMed Central

Glasgow, Russell E.; Carpenter, Christopher R.; Grimshaw, Jeremy M.; Rabin, Borsika A.; Fernandez, Maria E.; Brownson, Ross C.

2015-01-01

A comprehensive guide that identifies critical evaluation and reporting elements necessary to move research into practice is needed. We propose a framework that highlights the domains required to enhance the value of dissemination and implementation research for end users. We emphasize the importance of transparent reporting on the planning phase of research in addition to delivery, evaluation, and long-term outcomes. We highlight key topics for which well-established reporting and assessment tools are underused (e.g., cost of intervention, implementation strategy, adoption) and where such tools are inadequate or lacking (e.g., context, sustainability, evolution) within the context of existing reporting guidelines. Consistent evaluation of and reporting on these issues with standardized approaches would enhance the value of research for practitioners and decision-makers. PMID:25393182

Cost of cancer care for patients undergoing chemotherapy: The Elements of Cancer Care study.

PubMed

Ward, Robyn L; Laaksonen, Maarit A; van Gool, Kees; Pearson, Sallie-Anne; Daniels, Ben; Bastick, Patricia; Norman, Richard; Hou, Changhao; Haywood, Philip; Haas, Marion

2015-06-01

To determine the monthly treatment costs for each element of cancer care in patients receiving chemotherapy and to apportion the burden of cost by financing agent (Commonwealth, State government, private health insurer, patient). A cohort of 478 patients (54% breast, 33% colorectal and 13% non-small-cell lung cancer) were recruited from 12 centers representing metropolitan and regional settings in public and private sectors. Primary data were linked to secondary data held in New South Wales state (Admitted Patients and Emergency Department Data) and Commonwealth (Medicare and Pharmaceutical Benefits) databases. The monthly treatment costs of each element of care and the funding agent were calculated from secondary health data. Across all tumor types, the mean monthly treatment cost was $4162 (10%-90% quantiles $1018-$8098; range $2853 [adjuvant colorectal] to $5622 [metastatic lung]), with 54% of this cost borne by Commonwealth government, 26% by private health insurers, 14% by State government and 6% by patients. The mean monthly costs of treating metastatic disease were $1415 greater than those for adjuvant therapy. The mean monthly costs were contributed to by inpatient care ($1657, 40%), chemotherapy prescriptions ($1502, 36%), outpatient care ($452, 11%) and administration of chemotherapy ($364, 9%). All four funders have a shared incentive to reduce absolute monthly treatment costs since their proportional contribution is relatively constant for most tumor types and stages. There are opportunities to reduce cancer care costs by minimizing the risk of inpatient hospital admissions that arise from chemotherapy administration and by recognizing incentives for cost-shifting. © 2015 Wiley Publishing Asia Pty Ltd.

Direct measurement of health care costs.

PubMed

Smith, Mark W; Barnett, Paul G

2003-09-01

Cost identification is fundamental to many economic analyses of health care. Health care costs are often derived from administrative databases. Unit costs may also be obtained from published studies. When these sources will not suffice (e.g., in evaluating interventions or programs), data may be gathered directly through observation and surveys. This article describes how to use direct measurement to estimate the cost of an intervention. The authors review the elements of cost determination, including study perspective, the range of elements to measure, and short-run versus long-run costs. They then discuss the advantages and drawbacks of alternative direct measurement methods such as time-and-motion studies, activity logs, and surveys of patients and managers. A parsimonious data collection effort is desirable, although study hypotheses and perspective should guide the endeavor. Special reference is made to data sources within the Department of Veterans Affairs (VA) health care system.

COST MODEL FOR LARGE URBAN SCHOOLS.

ERIC Educational Resources Information Center

O'BRIEN, RICHARD J.

THIS DOCUMENT CONTAINS A COST SUBMODEL OF AN URBAN EDUCATIONAL SYSTEM. THIS MODEL REQUIRES THAT PUPIL POPULATION AND PROPOSED SCHOOL BUILDING ARE KNOWN. THE COST ELEMENTS ARE--(1) CONSTRUCTION COSTS OF NEW PLANTS, (2) ACQUISITION AND DEVELOPMENT COSTS OF BUILDING SITES, (3) CURRENT OPERATING EXPENSES OF THE PROPOSED SCHOOL, (4) PUPIL…

47 CFR 51.513 - Proxies for forward-looking economic cost.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

47 CFR 51.513 - Proxies for forward-looking economic cost.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

47 CFR 51.513 - Proxies for forward-looking economic cost.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

47 CFR 51.513 - Proxies for forward-looking economic cost.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

47 CFR 51.513 - Proxies for forward-looking economic cost.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Proxies for forward-looking economic cost. 51... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.513 Proxies for forward-looking economic cost... a cost study that complies with the forward-looking economic cost based pricing methodology...

Student Voice in a Chinese Context: Investigating the Key Elements of Leadership That Enhance Student Voice

ERIC Educational Resources Information Center

Cheng, Annie Yan Ni

2012-01-01

This study examines the issues surrounding "student voice" in a specific Chinese context, and assesses the key elements of leadership that could enhance student voice in that context. It reports the results of a research conducted in a community-based educational centre in Hong Kong that provides after-school educational and social…

Drawing with Light and Clay: Teaching and Learning in the Art Studio as Pathways to Engagement

ERIC Educational Resources Information Center

Albertson, Constant; Davidson, Miriam

2007-01-01

In this essay, Albertson and Davidson explore the attributes of photography and ceramic arts education to identify eight key elements integral to engagement in these art studios for under-served and disenchanted learners. They suggest that these key elements can provide numerous clues as to how teachers and school communities might reimagine both…

Costing bias in economic evaluations.

PubMed

Frappier, Julie; Tremblay, Gabriel; Charny, Mark; Cloutier, L Martin

2015-01-01

Determining the cost-effectiveness of healthcare interventions is key to the decision-making process in healthcare. Cost comparisons are used to demonstrate the economic value of treatment options, to evaluate the impact on the insurer budget, and are often used as a key criterion in treatment comparison and comparative effectiveness; however, little guidance is available to researchers for establishing the costing of clinical events and resource utilization. Different costing methods exist, and the choice of underlying assumptions appears to have a significant impact on the results of the costing analysis. This editorial describes the importance of the choice of the costing technique and it's potential impact on the relative cost of treatment options. This editorial also calls for a more efficient approach to healthcare intervention costing in order to ensure the use of consistent costing in the decision-making process.

The long (LINEs) and the short (SINEs) of it: altered methylation as a precursor to toxicity.

PubMed

Carnell, Ammie N; Goodman, Jay I

2003-10-01

Although once thought of as "junk" DNA, the importance of interspersed elements in the genome has become increasingly appreciated in recent years. In a broad sense these are collectively referred to as transposable elements, which encompass both transposons and retrotransposons. The latter include long interspersed nuclear elements (LINEs) and short interspersed nuclear elements (SINEs). Expression of these elements leads to genetic instability. Therefore, it is important that they remain transcriptionally silenced, and DNA methylation plays a key role in this regard. A framework for understanding the possible interplay between altered DNA methylation, an epigenetic change, and mutational events is presented. A case is made as to how retrotransposable elements, specifically LINEs and SINEs, are likely to emerge as key players in furthering our understanding of mechanisms underlying a variety of toxicities, including carcinogenesis but not limited to this endpoint.

The direct and indirect costs of managing chronic obstructive pulmonary disease in Greece.

PubMed

Souliotis, Kyriakos; Kousoulakou, Hara; Hillas, Georgios; Tzanakis, Nikos; Toumbis, Michalis; Vassilakopoulos, Theodoros

2017-01-01

COPD is associated with significant economic burden. The objective of this study was to explore the direct and indirect costs associated with COPD and identify the key cost drivers of disease management in Greece. A Delphi panel of Greek pulmonologists was conducted, which aimed at eliciting local COPD treatment patterns and resource use. Resource use was translated into costs using official health insurance tariffs and Diagnosis-Related Groups (DRGs). In addition, absenteeism and caregiver's costs were recorded in order to quantify indirect COPD costs. The total costs of managing COPD per patient per year were estimated at €4,730, with direct (medical and nonmedical) and indirect costs accounting for 62.5% and 37.5%, respectively. COPD exacerbations were responsible for 32% of total costs (€1,512). Key exacerbation-related cost drivers were hospitalization (€830) and intensive care unit (ICU) admission costs (€454), jointly accounting for 85% of total exacerbation costs. Annual maintenance phase costs were estimated at €835, with pharmaceutical treatment accounting for 77% (€639.9). Patient time costs were estimated at €146 per year. The average number of sick days per year was estimated at 16.9, resulting in productivity losses of €968. Caregiver's costs were estimated at €806 per year. The management of COPD in Greece is associated with intensive resource use and significant economic burden. Exacerbations and productivity losses are the key cost drivers. Cost containment policies should focus on prioritizing treatments that increase patient compliance as these can lead to reduction of exacerbations, longer maintenance phases, and thus lower costs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoogmartens, Rob, E-mail: rob.hoogmartens@uhasselt.be; Van Passel, Steven, E-mail: steven.vanpassel@uhasselt.be; Van Acker, Karel, E-mail: karel.vanacker@lrd.kuleuven.be

Increasing interest in sustainability has led to the development of sustainability assessment tools such as Life Cycle Analysis (LCA), Life Cycle Costing (LCC) and Cost–Benefit Analysis (CBA). Due to methodological disparity of these three tools, conflicting assessment results generate confusion for many policy and business decisions. In order to interpret and integrate assessment results, the paper provides a framework that clarifies the connections and coherence between the included assessment methodologies. Building on this framework, the paper further focuses on key aspects to adapt any of the methodologies to full sustainability assessments. Aspects dealt with in the review are for examplemore » the reported metrics, the scope, data requirements, discounting, product- or project-related and approaches with respect to scarcity and labor requirements. In addition to these key aspects, the review shows that important connections exist: (i) the three tools can cope with social inequality, (ii) processes such as valuation techniques for LCC and CBA are common, (iii) Environmental Impact Assessment (EIA) is used as input in both LCA and CBA and (iv) LCA can be used in parallel with LCC. Furthermore, the most integrated sustainability approach combines elements of LCA and LCC to achieve the Life Cycle Sustainability Assessment (LCSA). The key aspects and the connections referred to in the review are illustrated with a case study on the treatment of end-of-life automotive glass. - Highlights: • Proliferation of assessment tools creates ambiguity and confusion. • The developed assessment framework clarifies connections between assessment tools. • Broadening LCA, key aspects are metric and data requirements. • Broadening LCC, key aspects are scope, time frame and discounting. • Broadening CBA, focus point, timespan, references, labor and scarcity are key.« less

Task switching in a hierarchical task structure: evidence for the fragility of the task repetition benefit.

PubMed

Lien, Mei-Ching; Ruthruff, Eric

2004-05-01

This study examined how task switching is affected by hierarchical task organization. Traditional task-switching studies, which use a constant temporal and spatial distance between each task element (defined as a stimulus requiring a response), promote a flat task structure. Using this approach, Experiment 1 revealed a large switch cost of 238 ms. In Experiments 2-5, adjacent task elements were grouped temporally and/or spatially (forming an ensemble) to create a hierarchical task organization. Results indicate that the effect of switching at the ensemble level dominated the effect of switching at the element level. Experiments 6 and 7, using an ensemble of 3 task elements, revealed that the element-level switch cost was virtually absent between ensembles but was large within an ensemble. The authors conclude that the element-level task repetition benefit is fragile and can be eliminated in a hierarchical task organization.

Task switching in a hierarchical task structure: evidence for the fragility of the task repetition benefit

NASA Technical Reports Server (NTRS)

Lien, Mei-Ching; Ruthruff, Eric

2004-01-01

This study examined how task switching is affected by hierarchical task organization. Traditional task-switching studies, which use a constant temporal and spatial distance between each task element (defined as a stimulus requiring a response), promote a flat task structure. Using this approach, Experiment 1 revealed a large switch cost of 238 ms. In Experiments 2-5, adjacent task elements were grouped temporally and/or spatially (forming an ensemble) to create a hierarchical task organization. Results indicate that the effect of switching at the ensemble level dominated the effect of switching at the element level. Experiments 6 and 7, using an ensemble of 3 task elements, revealed that the element-level switch cost was virtually absent between ensembles but was large within an ensemble. The authors conclude that the element-level task repetition benefit is fragile and can be eliminated in a hierarchical task organization.

The fight against tobacco in developing countries.

PubMed

Mackay, J L

1994-02-01

The battle to reduce the tobacco epidemic is not being won; the epidemic is merely being transferred from rich to poor countries. Tobacco-related mortality will rise from the present annual global toll of 3 million to over 10 million by the year 2025. Currently, most of these deaths are in developed countries but 7 out of the 10 million deaths will occur in developing countries by 2025. Developing countries cannot afford this increase, either in terms of human health or in economic costs, such as medical and health care costs, costs of lost productivity, costs of fires or costs of the misuse of land used to grow tobacco. As many of the tobacco-related illnesses, such as lung cancer or emphysema, are incurable even with expensive technology, the key to tobacco control lies in prevention. The essential elements of a national tobacco control policy are the same for all countries throughout the world--the only differences lie in fine tuning to a country's current situation. While indigenous production and consumption of tobacco remain a problem, of particular concern is the penetration of developing countries by the transnational tobacco companies, with aggressive promotional campaigns and the use of political and commercial pressures to open up markets and to promote foreign cigarettes. This includes specific targeting of women, few of whom currently smoke in developing countries. Also, tobacco advertising revenue prevents the media from reporting on the hazards of tobacco, a particularly serious problem in developing countries where awareness of the harmfulness of tobacco is low.(ABSTRACT TRUNCATED AT 250 WORDS)

Structural health and prognostics management for the enhancement of offshore wind turbine operations and maintenance strategies

DOE PAGES

Griffith, D. Todd; Yoder, Nathanael C.; Resor, Brian; ...

2013-09-19

Offshore wind turbines are an attractive source for clean and renewable energy for reasons including their proximity to population centers and higher capacity factors. One obstacle to the more widespread installation of offshore wind turbines in the USA, however, is that recent projections of offshore operations and maintenance costs vary from two to five times the land-based costs. One way in which these costs could be reduced is through use of a structural health and prognostics management (SHPM) system as part of a condition-based maintenance paradigm with smart loads management. Our paper contributes to the development of such strategies bymore » developing an initial roadmap for SHPM, with application to the blades. One of the key elements of the approach is a multiscale simulation approach developed to identify how the underlying physics of the system are affected by the presence of damage and how these changes manifest themselves in the operational response of a full turbine. A case study of a trailing edge disbond is analysed to demonstrate the multiscale sensitivity of damage approach and to show the potential life extension and increased energy capture that can be achieved using simple changes in the overall turbine control and loads management strategy. Finally, the integration of health monitoring information, economic considerations such as repair costs versus state of health, and a smart loads management methodology provides an initial roadmap for reducing operations and maintenance costs for offshore wind farms while increasing turbine availability and overall profit.« less

Commercial insurance vs community-based health plans: time for a policy option with clinical emphasis to address the cost spiral.

PubMed

Amundson, Bruce

2005-01-01

The nation continues its ceaseless struggle with the spiraling cost of health care. Previous efforts (regulation, competition, voluntary action) have included almost every strategy except clinical. Insurers have largely failed in their cost-containment efforts. There is a strong emerging body of literature that demonstrates the relationship between various clinical strategies and reductions in utilization and costs. This article describes the organization of health services, including integration of delivery and financing systems, at the community level as a model that effectively addresses the critical structural flaws that have frustrated control of costs. Community-based health plans (CHPs) have been developed and have demonstrated viability. The key elements of CHPs are a legal organizational structure, a full provider network, advanced care-management systems, and the ability to assume financial risk. Common misconceptions regarding obstacles to CHP development are the complexity of the undertaking, difficulty assuming the insurance function, and insured pools that are too small to be viable. The characteristics of successful CHPs and 2 case studies are described, including the types of advanced care-management systems that have resulted in strong financial performance. The demonstrated ability of CHPs to establish financial viability with small numbers of enrollees challenges the common assumption that there is a fixed relationship between health plan enrollment size and financial performance. Organizing the health system at the community/regional level provides an attractive alternative model in the health-reform debate. There is an opportunity for clinical systems and state and federal leaders to support the development of community-based integrated delivery and financing system models that, among other advantages, have significant potential to modulate the pernicious cost spiral.

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data

NASA Astrophysics Data System (ADS)

Wolery, Thomas J.; Jové Colón, Carlos F.

2017-09-01

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data. Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO2, water, and aqueous species such as Na+ and Cl-. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15 K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of "links" to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare "key" or "reference" datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.

Rigorous GNSS network solutions of unlimited size

NASA Astrophysics Data System (ADS)

Boomkamp, H.; Iag Working Group 1. 1. 1

2010-12-01

The session description states that rigorous estimation processes for millions of parameters are computationally impossible. A more accurate observation would be that such solutions exceed the capacity of current Analysis Centres by several orders of magnitude, as was already discussed during the IGS Workshop of 2004. We can however make processing elements that are smaller and simpler than conventional Analysis Centres, until we have a “centre” that can be replicated in arbitrary amounts, at zero cost. In practice this means that the processing element is reduced to a single, automated computer application that can run anywhere. These analysis elements are connected via the internet into a scalable grid computing scheme that can handle GNSS networks of any size. The approach is not fundamentally different from current combination solutions among a network of Analysis Centres, but refines the granularity of the network elements in order to reduce system complexity and eliminate cost. The Dancer project of IAG Working Group 1 has developed a JXTA peer-to-peer application to this purpose. Dancer splits a conventional batch least squares process into as many interacting subtasks as there are receivers. Each task can then run on a local PC of a permanent GNSS site, or anywhere else. All Dancer instances find the same global solution for satellite orbits, clocks and Earth rotation parameters via an efficient vector averaging method called square dancing. The hardware requirements for a single Dancer process do not exceed those of e.g. current mobile phone applications, so that future generations of GNSS receivers may be able to run such a task as an embedded process. This leads to the concept of “smart receivers” that no longer require any post-processing infrastructure. Instead they need an internet connection to join thousands of other smart receivers in a global network solution. The key algorithms, project status and further deployment of the Dancer system will be presented. A brief summary is also given of two follow-on projects, called Digger (distributed computing for global geodetic reprocessing) and Dart (Dancer real-time). For more details, see www.GPSdancer.com.

Element-topology-independent preconditioners for parallel finite element computations

NASA Technical Reports Server (NTRS)

Park, K. C.; Alexander, Scott

1992-01-01

A family of preconditioners for the solution of finite element equations are presented, which are element-topology independent and thus can be applicable to element order-free parallel computations. A key feature of the present preconditioners is the repeated use of element connectivity matrices and their left and right inverses. The properties and performance of the present preconditioners are demonstrated via beam and two-dimensional finite element matrices for implicit time integration computations.

From 'solution shop' model to 'focused factory' in hospital surgery: increasing care value and predictability.

PubMed

Cook, David; Thompson, Jeffrey E; Habermann, Elizabeth B; Visscher, Sue L; Dearani, Joseph A; Roger, Veronique L; Borah, Bijan J

2014-05-01

The full-service US hospital has been described organizationally as a "solution shop," in which medical problems are assumed to be unstructured and to require expert physicians to determine each course of care. If universally applied, this model contributes to unwarranted variation in care, which leads to lower quality and higher costs. We purposely disrupted the adult cardiac surgical practice that we led at Mayo Clinic, in Rochester, Minnesota, by creating a "focused factory" model (characterized by a uniform approach to delivering a limited set of high-quality products) within the practice's solution shop. Key elements of implementing the new model were mapping the care process, segmenting the patient population, using information technology to communicate clearly defined expectations, and empowering nonphysician providers at the bedside. Using a set of criteria, we determined that the focused-factory model was appropriate for 67 percent of cardiac surgical patients. We found that implementation of the model reduced resource use, length-of-stay, and cost. Variation was markedly reduced, and outcomes were improved. Assigning patients to different care models increases care value and the predictability of care process, outcomes, and costs while preserving (in a lesser clinical footprint) the strengths of the solution shop. We conclude that creating a focused-factory model within a solution shop, by applying industrial engineering principles and health information technology tools and changing the model of work, is very effective in both improving quality and reducing costs.

Nonisothermal glass molding for the cost-efficient production of precision freeform optics

NASA Astrophysics Data System (ADS)

Vu, Anh-Tuan; Kreilkamp, Holger; Dambon, Olaf; Klocke, Fritz

2016-07-01

Glass molding has become a key replication-based technology to satisfy intensively growing demands of complex precision optics in the today's photonic market. However, the state-of-the-art replicative technologies are still limited, mainly due to their insufficiency to meet the requirements of mass production. This paper introduces a newly developed nonisothermal glass molding in which a complex-shaped optic is produced in a very short process cycle. The innovative molding technology promises a cost-efficient production because of increased mold lifetime, less energy consumption, and high throughput from a fast process chain. At the early stage of the process development, the research focuses on an integration of finite element simulation into the process chain to reduce time and labor-intensive cost. By virtue of numerical modeling, defects including chill ripples and glass sticking in the nonisothermal molding process can be predicted and the consequent effects are avoided. In addition, the influences of process parameters and glass preforms on the surface quality, form accuracy, and residual stress are discussed. A series of experiments was carried out to validate the simulation results. The successful modeling, therefore, provides a systematic strategy for glass preform design, mold compensation, and optimization of the process parameters. In conclusion, the integration of simulation into the entire nonisothermal glass molding process chain will significantly increase the manufacturing efficiency as well as reduce the time-to-market for the mass production of complex precision yet low-cost glass optics.

Heat Switches for ADRs

NASA Technical Reports Server (NTRS)

DiPirro, M. J.; Shirron, P. J.

2014-01-01

Heat switches are key elements in the cyclic operation of Adiabatic Demagnetization Refrigerators (ADRs). Several of the types of heat switches that have been used for ADRs are described in this paper. Key elements in selection and design of these switches include not only ON/OFF switching ratio, but also method of actuation, size, weight, and structural soundness. Some of the trade-off are detailed in this paper.

Low-cost interferometric TDM technology for dynamic sensing applications

NASA Astrophysics Data System (ADS)

Bush, Jeff; Cekorich, Allen

2004-12-01

A low-cost design approach for Time Division Multiplexed (TDM) fiber-optic interferometric interrogation of multi-channel sensor arrays is presented. This paper describes the evolutionary design process of the subject design. First, the requisite elements of interferometric interrogation are defined for a single channel sensor. The concept is then extended to multi-channel sensor interrogation implementing a TDM multiplex scheme where "traditional" design elements are utilized. The cost of the traditional TDM interrogator is investigated and concluded to be too high for entry into many markets. A new design approach is presented which significantly reduces the cost for TDM interrogation. This new approach, in accordance with the cost objectives, shows promise to bring this technology to within the threshold of commercial acceptance for a wide range of distributed fiber sensing applications.

Force Structure: Better Information Needed to Support Air Force A-10 and Other Future Divestment Decisions

DTIC Science & Technology

2016-08-01

estimate should have a standardized structure that breaks costs into discrete elements with sufficient detail to ensure that cost elements are...FORCE STRUCTURE Better Information Needed to Support Air Force A-10 and Other Future Divestment Decisions Report...Accountability Office Highlights of GAO-16-816, a report to congressional committees August 2016 FORCE STRUCTURE Better Information Needed to Support

Estimating the cost of major ongoing cost plus hardware development programs

NASA Technical Reports Server (NTRS)

Bush, J. C.

1990-01-01

Approaches are developed for forecasting the cost of major hardware development programs while these programs are in the design and development C/D phase. Three approaches are developed: a schedule assessment technique for bottom-line summary cost estimation, a detailed cost estimation approach, and an intermediate cost element analysis procedure. The schedule assessment technique was developed using historical cost/schedule performance data.

The role of peer support in diabetes care and self-management.

PubMed

Brownson, Carol A; Heisler, Michele

2009-03-01

In light of the growing prevalence and healthcare costs of diabetes mellitus, it is critically important for healthcare providers to improve the efficiency and effectiveness of their diabetes care. A key element of effective disease management for diabetes is support for patient self-management. Barriers to care exist for both patients and healthcare systems. As a result, many people with diabetes do not get the care and support needed to successfully manage their diabetes.Disease management approaches that incorporate peer support may be a promising way to help provide self-management support to patients with diabetes. Trained peers provide emotional support, instrumental (tangible or material) support, education, and skills training to those they serve, and outreach and care coordination for provider systems. They play a unique role that complements and supports clinical care.To describe how peers are currently supporting diabetes care, a number of databases were searched for studies describing the roles of peers using relevant key words. This paper reviews current literature that describes the roles and duties of peers in interventions to improve diabetes care, with a focus on their contributions to six essential elements of self-management support: (i) access to regular, high-quality clinical care; (ii) an individualized approach to assessment and treatment; (iii) patient-centered collaborative goal setting; (iv) education and skills training; (v) ongoing follow-up and support; and (vi) linkages to community resources.Peers worked under a variety of titles, which did not define their duties. The scope of their work ranged from assisting health professionals to playing a central role in care. Providing education and follow-up support were the two most common roles. In all but one study, these roles were carried out during face-to-face contact, most frequently in community sites.A growing body of literature supports the value of peer models for diabetes management. Additional research can answer remaining questions related to such issues as cost effectiveness, sustainability, integration of peers into health and social service delivery systems, and recruitment, training, and support of peers. Continuing to develop and evaluate innovative models for more effectively mobilizing and integrating peers into diabetes care has great potential for improving diabetes outcomes worldwide.

Key aspects of cost effective collector and solar field design

NASA Astrophysics Data System (ADS)

von Reeken, Finn; Nicodemo, Dario; Keck, Thomas; Weinrebe, Gerhard; Balz, Markus

2016-05-01

A study has been performed where different key parameters influencing solar field cost are varied. By using levelised cost of energy as figure of merit it is shown that parameters like GoToStow wind speed, heliostat stiffness or tower height should be adapted to respective site conditions from an economical point of view. The benchmark site Redstone (Northern Cape Province, South Africa) has been compared to an alternate site close to Phoenix (AZ, USA) regarding site conditions and their effect on cost-effective collector and solar field design.

A Collaboration on Collaboration

NASA Technical Reports Server (NTRS)

Cobleigh, Brent

2004-01-01

NASA's 2003-2004 Leadership Development Program class recognized that effective collaborations are often the key to achieving mission success. Personal connections and common goals were key elements of their work together and key findings of their collaboration benchmarking within the agency.

Population-based programs for increasing colorectal cancer screening in the United States.

PubMed

Verma, Manisha; Sarfaty, Mona; Brooks, Durado; Wender, Richard C

2015-01-01

Answer questions and earn CME/CNE Screening to detect polyps or cancer at an early stage has been shown to produce better outcomes in colorectal cancer (CRC). Programs with a population-based approach can reach a large majority of the eligible population and can offer cost-effective interventions with the potential benefit of maximizing early cancer detection and prevention using a complete follow-up plan. The purpose of this review was to summarize the key features of population-based programs to increase CRC screening in the United States. A search was conducted in the SCOPUS, OvidSP, and PubMed databases. The authors selected published reports of population-based programs that met at least 5 of the 6 International Agency for Research on Cancer (IARC) criteria for cancer prevention and were known to the National Colorectal Cancer Roundtable. Interventions at the level of individual practices were not included in this review. IARC cancer prevention criteria served as a framework to assess the effective processes and elements of a population-based program. Eight programs were included in this review. Half of the programs met all IARC criteria, and all programs led to improvements in screening rates. The rate of colonoscopy after a positive stool test was heterogeneous among programs. Different population-based strategies were used to promote these screening programs, including system-based, provider-based, patient-based, and media-based strategies. Treatment of identified cancer cases was not included explicitly in 4 programs but was offered through routine medical care. Evidence-based methods for promoting CRC screening at a population level can guide the development of future approaches in health care prevention. The key elements of a successful population-based approach include adherence to the 6 IARC criteria and 4 additional elements (an identified external funding source, a structured policy for positive fecal occult blood test results and confirmed cancer cases, outreach activities for recruitment and patient education, and an established rescreening process). © 2015 American Cancer Society.

Assignment Of Finite Elements To Parallel Processors

NASA Technical Reports Server (NTRS)

Salama, Moktar A.; Flower, Jon W.; Otto, Steve W.

1990-01-01

Elements assigned approximately optimally to subdomains. Mapping algorithm based on simulated-annealing concept used to minimize approximate time required to perform finite-element computation on hypercube computer or other network of parallel data processors. Mapping algorithm needed when shape of domain complicated or otherwise not obvious what allocation of elements to subdomains minimizes cost of computation.

Implementation of the BETTER 2 program: a qualitative study exploring barriers and facilitators of a novel way to improve chronic disease prevention and screening in primary care.

PubMed

Sopcak, Nicolette; Aguilar, Carolina; O'Brien, Mary Ann; Nykiforuk, Candace; Aubrey-Bassler, Kris; Cullen, Richard; Grunfeld, Eva; Manca, Donna Patricia

2016-12-01

BETTER (Building on Existing Tools to Improve Chronic Disease Prevention and Screening in Primary Care) is a patient-based intervention to improve chronic disease prevention and screening (CDPS) for cardiovascular disease, diabetes, cancer, and associated lifestyle factors in patients aged 40 to 65. The key component of BETTER is a prevention practitioner (PP), a health care professional with specialized skills in CDPS who meets with patients to develop a personalized prevention prescription, using the BETTER toolkit and Brief Action Planning. The purpose of this qualitative study was to understand facilitators and barriers of the implementation of the BETTER 2 program among clinicians, patients, and stakeholders in three (urban, rural, and remote) primary care settings in Newfoundland and Labrador, Canada. We collected and analyzed responses from 20 key informant interviews and 5 focus groups, as well as memos and field notes. Data were organized using Nvivo 10 software and coded using constant comparison methods. We then employed the Consolidated Framework for Implementation Research (CFIR) to focus our analysis on the domains most relevant for program implementation. The following key elements, within the five CFIR domains, were identified as impacting the implementation of BETTER 2: (1) intervention characteristics-complexity and cost of the intervention; (2) outer setting-perception of fit including lack of remuneration, lack of resources, and duplication of services, as well as patients' needs as perceived by physicians and patients; (3) characteristics of prevention practitioners-interest in prevention and ability to support and motivate patients; (4) inner setting-the availability of a local champion and working in a team versus working as a team; and (5) process-planning and engaging, collaboration, and teamwork. The implementation of a novel CDPS program into new primary care settings is a complex, multi-level process. This study identified key elements that hindered or facilitated the implementation of the BETTER approach in three primary care settings in Newfoundland and Labrador. Employing the CFIR as an overarching typology allows for comparisons with other contexts and settings, and may be useful for practices, researchers, and policy-makers interested in the implementation of CDPS programs.

RS-25 for the NASA Cargo Launch Vehicle: The Evolution of SSME for Space Exploration

NASA Technical Reports Server (NTRS)

Kynard, Michael H.; McArthur, J. Craig; Ise, Dayna S.

2006-01-01

A key element of the National Vision for Space Exploration is the development of a heavy-lift Cargo Launch Vehicle (CaLV). Missions to the Moon, Mars, and beyond are only possible with the logistical capacity of putting large payloads in low-earth orbit. However, beyond simple logistics, there exists the need for this capability to be as cost effective as possible to ensure mission sustainability. An element of the CaLV project is, therefore, the development of the RS-25, which represents the evolution of the proven Space Shuttle Main Engine (SSME) into a high-performance, cost-effective expendable rocket engine. The development of the RS-25 will be built upon the foundation of over one million seconds of accumulated hot-fire time on the SSME. Yet in order to transform the reusable SSME into the more cost-effective, expendable RS-25 changes will have to be made. Thus the project will inevitably strive to maintain a balance between demonstrated heritage products and processes and the utilization of newer technology developments. Towards that end, the Core Stage Engine Office has been established at the NASA Marshall Space Flight Center to initiate the design and development of the RS-25 engine. This paper is being written very early in the formulation phase of the RS-25 project. Therefore the focus of this paper will be to present the scope, challenges, and opportunities for the RS-25 project. Early schedules and development decisions and plans will be explained. For not only must the RS-25 project achieve cost effectiveness through the development of new, evolved components such as a channel-wall nozzle, a new HIP-bonded main combustion chamber, and several others, it must simultaneously develop the means whereby this engine can be manufactured on a scale never envisioned for the SSME. Thus, while the overall project will span the next eight to ten years, there is little doubt that even this schedule is aggressive with a great deal of work to accomplish.

Permanent magnets for vehicle-propulsion motors: Cost/availability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oman, H.; Simpson-Clark, R.

1996-12-31

Alternating-current induction motors have been used for fuel-pumping and air-conditioning in airplanes. Series and shunt dc motors have propelled vehicles. The power received by motors goes into producing output torque and magnetic fields. Today these fields can be produced with rare-earth permanent magnets which do not consume input power. Dramatic improvements in motor efficiency can result. Furthermore, with efficient variable-speed controllers using MOSFET and IGBT semiconductors, electric motors can replace the hydraulic actuators that move aircraft surfaces and retract landing gear. The 1993 cost for the magnets in a 100 kW motor was $1,500. Improved production processes are expected tomore » drop this cost to around $400. However, today`s rare-earth magnet-materials are by-products of mines that produce other metals and minerals. The authors explore the effect on cost of increased demand for the pertinent rare-earth elements, neodymium, cobalt, and samarium. A higher price will cause more elements to be extracted from existing mines. The opening of new rare-earth-element mines is another possibility. In 1993 the $250-per-kg cost for neodymium-iron-boron magnets included $190 for processing. Processing cost can drop to $30 per kg of magnet when production reaches 60 tons per month. The cost of the raw material for the magnets will be affected by man factors in a complex scenario.« less

A Status of the Advanced Space Transportation Program from Planning to Action

NASA Technical Reports Server (NTRS)

Lyles, Garry; Griner, Carolyn

1998-01-01

A Technology Plan for Enabling Commercial Space Business was presented at the 48th International Astronautical Congress in Turin, Italy. This paper presents a status of the program's accomplishments. Technology demonstrations have progressed in each of the four elements of the program; (1) Low Cost Technology, (2) Advanced Reusable Technology, (3) Space Transfer Technology and (4) Space Transportation Research. The Low Cost Technology program element is primarily focused at reducing development and acquisition costs of aerospace hardware using a "design to cost" philosophy with robust margins, adapting commercial manufacturing processes and commercial off-the-shelf hardware. The attributes of this philosophy for small payload launch are being demonstrated at the component, sub-system, and system level. The X-34 "Fastrac" engine has progressed through major component and subsystem demonstrations. A propulsion system test bed has been implemented for system-level demonstration of component and subsystem technologies; including propellant tankage and feedlines, controls, pressurization, and engine systems. Low cost turbopump designs, commercial valves and a controller are demonstrating the potential for a ten-fold reduction in engine and propulsion system costs. The Advanced Reusable Technology program element is focused on increasing life through high strength-to-weight structures and propulsion components, highly integrated propellant tanks, automated checkout and health management and increased propulsion system performance. The validation of rocket based combined cycle (RBCC) propulsion is pro,-,ressing through component and subsystem testing. RBCC propulsion has the potential to provide performance margin over an all rocket system that could result in lower gross liftoff weight, a lower propellant mass fraction or a higher payload mass fraction. The Space Transfer Technology element of the program is pursuing technology that can improve performance and dramatically reduce the propellant and structural mass of orbit transfer and deep space systems. Flight demonstration of ion propulsion is progressing towards launch. Ion propulsion is the primary propulsion for Deep Space 1; a flyby of comet West-kohoutek-lkemura and asteroid 3352 McAuliffe. Testing of critical solar-thermal propulsion subsystems have been accomplished and planning is continuing for the flight demonstration of an electrodynamic tether orbit transfer system. The forth and final element of the program, Space Transportation Research, has progressed in several areas of propulsion research. This element of the program is focused at long-term (25 years) breakthrough concepts that could bring launch costs to a factor of one hundred below today's cost or dramatically expand planetary travel and enable interstellar travel.

Thermal management and prototype testing of Compton scattering X-ray beam position monitor for the Advanced Photon Source Upgrade

DOE PAGES

Lee, S. H.; Yang, B. X.; Collins, J. T.; ...

2017-02-07

Accurate and stable x-ray beam position monitors (XBPMs) are key elements in obtaining the desired user beam stability in the Advanced Photon Source Upgrade. In the next-generation XBPMs for the canted-undulator front ends, where two undulator beams are separated by 1.0 mrad, the lower beam power (<10 kW) per undulator allows us to explore lower-cost solutions based on Compton scattering from a diamond placed edge-on to the x-ray beam. Because of the high peak power density of the x-ray beams, this diamond experiences high temperatures and has to be clamped to a water-cooled heat spreader using thermal interface materials (TIMs),more » which play a key role in reducing the temperature of the diamond. To evaluate temperature changes through the interface via thermal simulations, the thermal contact resistance (TCR) of TIMs at an interface between two solid materials under even contact pressure must be known. This paper addresses the TCR measurements of several TIMs, including gold, silver, pyrolytic graphite sheet, and 3D graphene foam. In addition, a prototype of a Compton-scattering XBPM with diamond blades was installed at APS Beamline 24-ID-A in May 2015 and has been tested. This study presents the design of the Compton-scattering XBPM, and compares thermal simulation results obtained for the diamond blade of this XBPM by the finite element method with in situ empirical measurements obtained by using reliable infrared technology.« less

Platinum Partitioning at Low Oxygen Fugacity: Implications for Core Formation Processes

NASA Technical Reports Server (NTRS)

Medard, E.; Martin, A. M.; Righter, K.; Lanziroti, A.; Newville, M.

2016-01-01

Highly siderophile elements (HSE = Au, Re, and the Pt-group elements) are tracers of silicate / metal interactions during planetary processes. Since most core-formation models involve some state of equilibrium between liquid silicate and liquid metal, understanding the partioning of highly siderophile elements (HSE) between silicate and metallic melts is a key issue for models of core / mantle equilibria and for core formation scenarios. However, partitioning models for HSE are still inaccurate due to the lack of sufficient experimental constraints to describe the variations of partitioning with key variable like temperature, pressure, and oxygen fugacity. In this abstract, we describe a self-consistent set of experiments aimed at determining the valence of platinum, one of the HSE, in silicate melts. This is a key information required to parameterize the evolution of platinum partitioning with oxygen fugacity.

Identification of Cost Indicators with Significant Economic Impact on the Total Treatment Costs of Chronic Heart Failure Patients - A Meta-Analysis.

PubMed

Hameed, Ahmed S; Modre-Osprian, Robert; Schreier, Günter

2017-01-01

Increasing treatment costs of HF patients affect the initiation of appropriate treatment method. Divergent approaches to measure the costs of treatment and the lack of common cost indicators impede the comparison of therapy settings. In the context of the present meta-analysis, key cost indicators from the perspective of healthcare providers are to be identified, described, analyzed and quantified. This review helps narrowing down the cost indicators, which have the most significant economic impact on the total treatment costs of HF patients. Telemedical services are to be compared to standard therapy methods. The identification process was based on several steps. For the quantitative synthesis, we used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. An additional set of criteria was defined for the following qualitative analysis. 5 key cost indicators were identified with significant economic impact on the treatment costs of HF patients. 95% of the reported treatment costs could be captured based on the identified cost indicators.

The Virginia pharmacy practice transformation conference: outcomes and next steps.

PubMed

Silvester, Janet A

2012-04-01

Thought leaders in Virginia came together to achieve consensus on the pharmacy practice innovations required to advance the medication-related health outcomes of patients in the Commonwealth. The participants identified key elements and strategies needed for practice transformation and these became the foundation for practice change. The primary key elements included legislation and regulation modifications, payment reform, and business model development. The Virginia Pharmacy Congress, which represents key pharmacy stakeholders in the Commonwealth, became the home for the transformation movement and the development and implementation of a unified action plan for achieving the envisioned practice transformation.

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data [plus Supplementary Electronic Annex 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolery, Thomas J.; Jove Colon, Carlos F.

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data.more » Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO 2, water, and aqueous species such as Na + and Cl -. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of “links” to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare “key” or “reference” datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.« less

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data [plus Supplementary Electronic Annex 2

DOE PAGES

Wolery, Thomas J.; Jove Colon, Carlos F.

2016-09-26

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data.more » Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO 2, water, and aqueous species such as Na + and Cl -. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of “links” to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare “key” or “reference” datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.« less

Cost Analysis and Performance Assessment of Partner Services for Human Immunodeficiency Virus and Sexually Transmitted Diseases, New York State, 2014.

PubMed

Johnson, Britney L; Tesoriero, James; Feng, Wenhui; Qian, Feng; Martin, Erika G

2017-12-01

To estimate the programmatic costs of partner services for HIV, syphilis, gonorrhea, and chlamydial infection. New York State and local health departments conducting partner services activities in 2014. A cost analysis estimated, from the state perspective, total program costs and cost per case assignment, patient interview, partner notification, and disease-specific key performance indicator. Data came from contracts, a time study of staff effort, and statewide surveillance systems. Disease-specific costs per case assignment (mean: $580; range: $502-$1,111), patient interview ($703; $608-$1,609), partner notification ($1,169; $950-$1,936), and key performance indicator ($2,697; $1,666-$20,255) varied across diseases. Most costs (79 percent) were devoted to gonorrhea and chlamydial infection investigations. Cost analysis complements cost-effectiveness analysis in evaluating program performance and guiding improvements. © Health Research and Educational Trust.

Personalized medicine, availability, and group disparity: an inquiry into how physicians perceive and rate the elements and barriers of personalized medicine.

PubMed

Petersen, Katelin E; Prows, Cynthia A; Martin, Lisa J; Maglo, Koffi N

2014-01-01

The success of personalized medicine depends on factors influencing the availability and implementation of its new tools to individualize clinical care. However, little is known about physicians' views of the availability of personalized medicine across racial/ethnic groups and the relationship between perceived availability and clinical implementation. This study examines physicians' perceptions of key elements/tools and potential barriers to personalized medicine in connection with their perceptions of the availability of the latter across subpopulations. Study subjects consisted of physicians recruited from Cincinnati Children's Hospital Medical Center and UC Health. An electronic survey conducted from September 2012 to November 2012 recruited 104 physicians. Wilcoxon rank sum analysis compared groups. Physicians were divided about whether personalized medicine contributes to health equality, as 37.4% of them believe that personalized medicine is currently available only for some subpopulations. They also rated the importance of racial/ethnic background almost as high as the importance of genetic information in the delivery of personalized medicine. Actual elements of personalized medicine rated highest include family history, drug-drug interaction alerts in medical records, and biomarker measurements to guide therapy. Costs of gene-based therapies and genetic testing were rated the most significant barriers. The ratings of several elements and barriers were associated with perceived availability of personalized medicine across subpopulations. While physicians hold differing views about the availability and implementation of personalized medicine, they likewise establish complex relationships between race/ethnicity and personalized medicine that may carry serious implications for its clinical success. © 2014 S. Karger AG, Basel.

Cost Allocation Issues in Interlibrary Systems.

ERIC Educational Resources Information Center

Alexander, Ernest R.

1985-01-01

In comparing methods of allocating service transaction costs among member libraries of interlibrary systems, questions of how costs are to be estimated, and what cost elements are to be included are critical. Different approaches of estimation yield varying results. Actual distribution of units accounts for greatest variance in allocations. (CDD)

“Even our Dairy Queen shut down”: Risk and resilience in bioenergy development in forest-dependent communities in the US South

Treesearch

Sarah Hitchner; John Schelhas; J. Peter Brosius

2017-01-01

Wood-based bioenergy in the US South is a key element in a sociotechnical imaginary that brings together rural development, energy independence, and environmental sustainability; it is also a key element in another imaginary in which powerful interest groups from the private sector and government collude in ways that enrich them regardless of success of the endeavor,...

Estimating healthcare resource use associated with the treatment of metastatic melanoma in eight countries.

PubMed

McKendrick, Jan; Gijsen, Merel; Quinn, Casey; Barber, Beth; Zhao, Zhongyun

2016-06-01

Objectives Studies reporting healthcare resourse use (HRU) for melanoma, one of the most costly cancers to treat, are limited. Using consistent, robust methodology, this study estimated HRU associated with the treatment of metastatic melanoma in eight countries. Methods Using published literature and clinician input, treatment phases were identified: active systemic treatment (pre-progression); disease progression; best supportive care (BSC)/palliative care; and terminal care. HRU elements were identified for each phase and estimates of the magnitude and frequency of use in clinical practice were obtained through country-specific Delphi panels, comprising healthcare professionals with experience in oncology (n = 8). Results Medical oncologists are the key care providers for patients with metastatic melanoma, although in Germany dermato-oncologists also lead care. During the active systemic treatment phase, each patient was estimated to require 0.83-2 consultations with a medical oncologist/month across countries; the median number of such assessments in 3 months was highest in Canada (range = 3.5-5) and lowest in France, the Netherlands and Spain (1). Resource use during the disease progression phase was intensive and similar across countries: all patients were estimated to consult with medical oncologists and 10-40% with a radiation oncologist; up to 40% were estimated to require a brain MRI scan. During the BSC/palliative care phase, all patients were estimated to consult with medical oncologists, and most to consult with a primary care physician (40-100%). Limitations Panelists were from centers of excellence, thus results may not reflect care within smaller hospitals; data obtained from experts may be less variable than data from broader clinical practice. Treatments for metastatic melanoma are continually emerging, thus some elements of our work could be superseded. Conclusions HRU estimates were substantial and varied across countries for some resources. These data could be used with country-specific costs to elucidate costs for the management of metastatic melanoma.

A definition of high-level decisions in the engineering of systems

NASA Astrophysics Data System (ADS)

Powell, Robert Anthony

The role of the systems engineer defines that he or she be proactive and guide the program manager and their customers through their decisions to enhance the effectiveness of system development---producing faster, better, and cheaper systems. The present lack of coverage in literature on what these decisions are and how they relate to each other may be a contributing factor to the high rate of failure among system projects. At the onset of the system development process, decisions have an integral role in the design of a system that meets stakeholders' needs. This is apparent during the design and qualification of both the Development System and the Operational System. The performance, cost and schedule of the Development System affect the performance of the Operational System and are affected by decisions that influence physical elements of the Development System. The performance, cost, and schedule of the Operational System is affected by decisions that influence physical elements of the Operational System. Traditionally, product and process have been designed using know-how and trial and error. However, the empiricism of engineers and program managers is limited which can, and has led to costly mistakes. To date, very little research has explored decisions made in the engineering of a system. In government, literature exists on procurement processes for major system development; but in general literature on decisions, how they relate to each other, and the key information requirements within one of two systems and across the two systems is not readily available. This research hopes to improve the processes inherent in the engineering of systems. The primary focus of this research is on department of defense (DoD) military systems, specifically aerospace systems and may generalize more broadly. The result of this research is a process tool, a Decision System Model, which can be used by systems engineers to guide the program manager and their customers through the decisions about concurrently designing and qualifying both the Development and Operational systems.

The cost of copy number in a selfish genetic element: the 2-μm plasmid of Saccharomyces cerevisiae.

PubMed

Harrison, Ellie; Koufopanou, V; Burt, A; MacLean, R C

2012-11-01

Many autonomously replicating genetic elements exist as multiple copies within the cell. The copy number of these elements is often assumed to have important fitness consequences for both element and host, yet the forces shaping its evolution are not well understood. The 2 μm is a multicopy plasmid of Saccharomyces yeasts, encoding just four genes that are solely involved in plasmid replication. One simple model for the fitness relationship between yeasts and 2 μm is that plasmid copy number evolves as a trade-off between selection for increased vertical transmission, favouring high copy number, and selection for decreased virulence, favouring low copy number. To test this model, we experimentally manipulated the copy number of the plasmid and directly measured the fitness cost, in terms of growth rate reduction, associated with high plasmid copy number. We find that the fitness burden imposed by the 2 μm increases with plasmid copy number, such that each copy imposes a fitness burden of 0.17% (± 0.008%), greatly exceeding the cost expected for it to be stably maintained in yeast populations. Our results demonstrate the crucial importance of copy number in the evolution of yeast per 2 μm associations and pave the way for future studies examining how selection can shape the cost of multicopy elements. © 2012 The Authors. Journal of Evolutionary Biology © 2012 European Society For Evolutionary Biology.

40 CFR Appendix III to Part 310 - Form: Application for Reimbursement to Local Governments for Emergency Response to Hazardous...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 29 2012-07-01 2012-07-01 false Form: Application for Reimbursement to... RESPONSE TO HAZARDOUS SUBSTANCE RELEASES Pt. 310, App. III Appendix III to Part 310—Form: Application for... ER18FE98.000 ER18FE98.001 Attachment 1 to Form 9310-1 Cost Element Codes and Comments [Cost Element Codes...

40 CFR Appendix III to Part 310 - Form: Application for Reimbursement to Local Governments for Emergency Response to Hazardous...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 28 2014-07-01 2014-07-01 false Form: Application for Reimbursement to... RESPONSE TO HAZARDOUS SUBSTANCE RELEASES Pt. 310, App. III Appendix III to Part 310—Form: Application for... ER18FE98.000 ER18FE98.001 Attachment 1 to Form 9310-1 Cost Element Codes and Comments [Cost Element Codes...

40 CFR Appendix III to Part 310 - Form: Application for Reimbursement to Local Governments for Emergency Response to Hazardous...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 29 2013-07-01 2013-07-01 false Form: Application for Reimbursement to... RESPONSE TO HAZARDOUS SUBSTANCE RELEASES Pt. 310, App. III Appendix III to Part 310—Form: Application for... ER18FE98.000 ER18FE98.001 Attachment 1 to Form 9310-1 Cost Element Codes and Comments [Cost Element Codes...

Concentrating Solar Power Central Receiver Panel Component Fabrication and Testing FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Michael W; Miner, Kris

The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then completemore » the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.« less

Concepts for Life Cycle Cost Control Required to Achieve Space Transportation Affordability and Sustainability

NASA Technical Reports Server (NTRS)

Rhodes, Russel E.; Zapata, Edgar; Levack, Daniel J. H.; Robinson, John W.; Donahue, Benjamin B.

2009-01-01

Cost control must be implemented through the establishment of requirements and controlled continually by managing to these requirements. Cost control of the non-recurring side of life cycle cost has traditionally been implemented in both commercial and government programs. The government uses the budget process to implement this control. The commercial approach is to use a similar process of allocating the non-recurring cost to major elements of the program. This type of control generally manages through a work breakdown structure (WBS) by defining the major elements of the program. If the cost control is to be applied across the entire program life cycle cost (LCC), the approach must be addressed very differently. A functional breakdown structure (FBS) is defined and recommended. Use of a FBS provides the visibifity to allow the choice of an integrated solution reducing the cost of providing many different elements of like function. The different functional solutions that drive the hardware logistics, quantity of documentation, operational labor, reliability and maintainability balance, and total integration of the entire system from DDT&E through the life of the program must be fully defined, compared, and final decisions made among these competing solutions. The major drivers of recurring cost have been identified and are presented and discussed. The LCC requirements must be established and flowed down to provide control of LCC. This LCC control will require a structured rigid process similar to the one traditionally used to control weight/performance for space transportation systems throughout the entire program. It has been demonstrated over the last 30 years that without a firm requirement and methodically structured cost control, it is unlikely that affordable and sustainable space transportation system LCC will be achieved.

Modal cost analysis for simple continua

NASA Technical Reports Server (NTRS)

Hu, A.; Skelton, R. E.; Yang, T. Y.

1988-01-01

The most popular finite element codes are based upon appealing theories of convergence of modal frequencies. For example, the popularity of cubic elements for beam-like structures is due to the rapid convergence of modal frequencies and stiffness properties. However, for those problems in which the primary consideration is the accuracy of response of the structure at specified locations, it is more important to obtain accuracy in the modal costs than in the modal frequencies. The modal cost represents the contribution of a mode in the norm of the response vector. This paper provides a complete modal cost analysis for simple continua such as beam-like structures. Upper bounds are developed for mode truncation errors in the model reduction process and modal cost analysis dictates which modes to retain in order to reduce the model for control design purposes.

An Efficient and Versatile Means for Assembling and Manufacturing Systems in Space

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Doggett, William R.; Hafley, Robert A.; Komendera, Erik; Correll, Nikolaus; King, Bruce

2012-01-01

Within NASA Space Science, Exploration and the Office of Chief Technologist, there are Grand Challenges and advanced future exploration, science and commercial mission applications that could benefit significantly from large-span and large-area structural systems. Of particular and persistent interest to the Space Science community is the desire for large (in the 10- 50 meter range for main aperture diameter) space telescopes that would revolutionize space astronomy. Achieving these systems will likely require on-orbit assembly, but previous approaches for assembling large-scale telescope truss structures and systems in space have been perceived as very costly because they require high precision and custom components. These components rely on a large number of mechanical connections and supporting infrastructure that are unique to each application. In this paper, a new assembly paradigm that mitigates these concerns is proposed and described. A new assembly approach, developed to implement the paradigm, is developed incorporating: Intelligent Precision Jigging Robots, Electron-Beam welding, robotic handling/manipulation, operations assembly sequence and path planning, and low precision weldable structural elements. Key advantages of the new assembly paradigm, as well as concept descriptions and ongoing research and technology development efforts for each of the major elements are summarized.

Materials and processing approaches for foundry-compatible transient electronics.

PubMed

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A; Song, Enming; Yu, Xinge; Rogers, John A

2017-07-11

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for "green" electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are ( i ) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, ( ii ) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and ( iii ) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries.

Learning and innovative elements of strategy adoption rules expand cooperative network topologies.

PubMed

Wang, Shijun; Szalay, Máté S; Zhang, Changshui; Csermely, Peter

2008-04-09

Cooperation plays a key role in the evolution of complex systems. However, the level of cooperation extensively varies with the topology of agent networks in the widely used models of repeated games. Here we show that cooperation remains rather stable by applying the reinforcement learning strategy adoption rule, Q-learning on a variety of random, regular, small-word, scale-free and modular network models in repeated, multi-agent Prisoner's Dilemma and Hawk-Dove games. Furthermore, we found that using the above model systems other long-term learning strategy adoption rules also promote cooperation, while introducing a low level of noise (as a model of innovation) to the strategy adoption rules makes the level of cooperation less dependent on the actual network topology. Our results demonstrate that long-term learning and random elements in the strategy adoption rules, when acting together, extend the range of network topologies enabling the development of cooperation at a wider range of costs and temptations. These results suggest that a balanced duo of learning and innovation may help to preserve cooperation during the re-organization of real-world networks, and may play a prominent role in the evolution of self-organizing, complex systems.

Materials and processing approaches for foundry-compatible transient electronics

NASA Astrophysics Data System (ADS)

Chang, Jan-Kai; Fang, Hui; Bower, Christopher A.; Song, Enming; Yu, Xinge; Rogers, John A.

2017-07-01

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for “green” electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are (i) collections of biodegradable electronic materials (e.g., silicon, tungsten, silicon nitride, silicon dioxide) and device architectures that are compatible with manufacturing procedures currently used in the integrated circuit industry, (ii) release schemes and transfer printing methods for integration of multiple ultrathin components formed in this way onto biodegradable polymer substrates, and (iii) planarization and metallization techniques to yield interconnected and fully functional systems. Various CMOS devices and circuit elements created in this fashion and detailed measurements of their electrical characteristics highlight the capabilities. Accelerated dissolution studies in aqueous environments reveal the chemical kinetics associated with the underlying transient behaviors. The results demonstrate the technical feasibility for using foundry-based routes to sophisticated forms of transient electronic devices, with functional capabilities and cost structures that could support diverse applications in the biomedical, military, industrial, and consumer industries.

Design of a spoke-type permanent-magnet motor with optimal winding configuration for electric vehicle applications

NASA Astrophysics Data System (ADS)

Chen, Qian; Liu, Guohai; Gong, Wensheng; Qu, Li; Zhao, Wenxiang; Shen, Yue

2012-04-01

The spoke-type motor has higher torque density than the conventional one resulting from its structure for concentrating flux from permanent magnets (PMs). However, this motor suffers from the serious distortion of back electromotive force (EMF). This paper proposes a cost-effective approach to design a spoke-type motor with lower harmonics of back-EMF for electric vehicle. The key is to superimpose the coil-EMF of one phase in such a way that the harmonics of the phase-EMF can be canceled, resulting in essentially sinusoidal waveforms. By using finite element method (FEM), an optimal coil-EMF vectors distribution for minimum harmonics of the phase-EMF is obtained and verified. In addition, the co-simulation technology is adopted to verify that the torque ripple under the optimal winding configuration can be significantly suppressed.

Presentation of economic evaluation results.

PubMed

Chaikledkaew, Usa

2014-05-01

The first HTA guidelines for Thailand included a chapter outlining a set of guidelines on how best to report the findings of health economic evaluations, based on a review of best practice and existing guidelines on the presentation of economic evaluation results from around the world. In this second edition of HTA guidelines for Thailand, the recommendations build on the first edition by using a case study to illustrate how the guidelines can be applied in a real research context. The guidelines propose that all reporting include ten key elements: defining the scope of the study, selection of comparator(s), defining the type of economic evaluation, measurement of costs, measurement of clinical effects, handling time in economic evaluation studies, handling uncertainty and sensitivity analysis, presentation of the results, discussion of the results, and disclosure of funding and authors conflict of interest.

Energy Savings Through Thermally Efficient Crucible Technology: Fundamentals, Process Modeling, and Applications

NASA Astrophysics Data System (ADS)

Shi, Wenwu; Pinto, Brian

2017-12-01

Melting and holding molten metals within crucibles accounts for a large portion of total energy demand in the resource-intensive nonferrous foundry industry. Multivariate mathematical modeling aided by detailed material characterization and advancements in crucible technologies can make a significant impact in the areas of cost-efficiency and carbon footprint reduction. Key thermal properties such as conductivity and specific heat capacity were studied to understand their influence on crucible furnace energy consumption during melting and holding processes. The effects of conductivity on thermal stresses and longevity of crucibles were also evaluated. With this information, accurate theoretical models using finite element analysis were developed to study total energy consumption and melting time. By applying these findings to recent crucible developments, considerable improvements in field performance were reported and documented as case studies in applications such as aluminum melting and holding.

Driver development of IFE power plant in Japan Collaborative process with industry and industrial applications

NASA Astrophysics Data System (ADS)

Nakai, S.; Yamanaka, M.; Kitagawa, Y.; Fujita, K.; Heya, M.; Mima, K.; Izawa, Y.; Nakatsuka, M.; Murakami, M.; Ueda, K.; Sasaki, T.; Mori, Y.; Kanabe, T.; Hiruma, T.; Kan, H.; Kawashima, T.

2006-06-01

The typical specifications of the laser driver for a commercial IFE power plant are (1) total energy (MJ/pulse) with a tailored 20-40 ns pulse, (2) repetition operation (˜ 10 Hz), (3) efficiency (˜ 10%) with enough robustness and low cost. The key elements of the DPSSL driver technology are under development with HALNA. The HALNA 10 (High Average-power Laser for Nuclear-fusion Application) demonstrated 10 J × 10 Hz operation and the HALNA 100 (100 J × 10 Hz) is now under construction. By using the high average power and high intensity lasers, new industrial applications are being proceeded. The collaborative process for the development of high power laser with industry and for the industrial applications is effective and essential in the development of the laser driver for IFE power plant.

Direct write of microlens array using digital projection photopolymerization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu Yi; Chen Shaochen

Microlens array is a key element in the field of information processing, optoelectronics, and integrated optics. Many existing fabrication processes remain expensive and complicated even though relatively low-cost replication processes have been developed. Here, we demonstrate the fabrication of microlens arrays through projection photopolymerization using a digital micromirror device (DMD) as a dynamic photomask. The DMD projects grayscale images, which are designed in a computer, onto a photocurable resin. The resin is then solidified with its thickness determined by a grayscale ultraviolet light and exposure time. Therefore, various geometries can be formed in a single-step, massively parallel fashion. We presentmore » microlens arrays made of acrylate-based polymer precursor. The physical and optical characteristics of the resulting lenses suggest that this fabrication technique is potentially suitable for applications in integrated optics.« less

Investing in nursing research in practice settings: a blueprint for building capacity.

PubMed

Jeffs, Lianne; Smith, Orla; Beswick, Susan; Maoine, Maria; Ferris, Ella

2013-12-01

Engaging clinical nurses in practice-based research is a cornerstone of professional nursing practice and a critical element in the delivery of high-quality patient care. Practising staff nurses are well suited to identify the phenomena and issues that are clinically relevant and appropriate for research. In response to the need to invest in and build capacity in nursing research, hospitals have developed creative approaches to spark interest in nursing research and to equip clinical nurses with research competencies. This paper outlines a Canadian hospital's efforts to build research capacity as a key strategy to foster efficacious, safe and cost-effective patient care practices. Within a multi-pronged framework, several strategies are described that collectively resulted in enhanced research and knowledge translation productivity aimed at improving the delivery of safe and high-quality patient care.

Surgical mesh for ventral incisional hernia repairs: Understanding mesh design

PubMed Central

Rastegarpour, Ali; Cheung, Michael; Vardhan, Madhurima; Ibrahim, Mohamed M; Butler, Charles E; Levinson, Howard

2016-01-01

Surgical mesh has become an indispensable tool in hernia repair to improve outcomes and reduce costs; however, efforts are constantly being undertaken in mesh development to overcome postoperative complications. Common complications include infection, pain, adhesions, mesh extrusion and hernia recurrence. Reducing the complications of mesh implantation is of utmost importance given that hernias occur in hundreds of thousands of patients per year in the United States. In the present review, the authors present the different types of hernia meshes, discuss the key properties of mesh design, and demonstrate how each design element affects performance and complications. The present article will provide a basis for surgeons to understand which mesh to choose for patient care and why, and will explain the important technological aspects that will continue to evolve over the ensuing years. PMID:27054138

Manufacturing and NDE of Large Composite Structures for Space Transportation at MSFC

NASA Technical Reports Server (NTRS)

McGill, Preston; Russell, Sam

2000-01-01

This paper presents the Marshall Space Flight Center's (MSFC's) vision to manufacture, increase safety and reduce the cost of launch vehicles. Nondestructive evaluations of large composite structures are tested for space transportation at MSFC. The topics include: 1) 6 1/2 Generations of Airplanes in a Century; 2) Shuttle Safety Upgrades; 3) Generations of Reusable Launch Vehicles; 4) RLV Technology Demonstration Path; 5) Second Generation; 6) Key NASA Requirements; 7) X-33 Elements; 8) Future-X Pathfinder Projects and Experiments; 9) Focus Area Technical Goals; 10) X-34 Expanded View; 11) X-38 Spacecraft with De-Orbit Propulsion Stage (DPS); 12) Deorbit Module (DM) Critical Design Review (CDR) Design; 13) Forward Structural Adapter (FSA) CDR Design; 14) X-38 DPS CDR Design; 15) RLV Focused Propulsion Technologies; and 16) Challenges in Technology. This paper is presented in viewgraph form.

Analysis of Potential Alternatives to Reduce NASA's Cost of Human Access to Space

NASA Technical Reports Server (NTRS)

1998-01-01

The purpose of this report is to analyze NASA's potential options for significantly reducing the cost of human access to space. The opinions expressed in this report are based on Hawthorne, Krauss & Associates' ("HKA") interaction with NASA and several of its key contractors over the past nine months. This report is not intended to be an exhaustive quantitative analysis of the various options available to NASA. Instead, its purpose is to outline key decision-related issues that the agency should consider prior to making a decision as to which option to pursue. This report attempts to bring a private-sector perspective to bear on the issue of reducing the cost of human access to space. HKA believes that the key to the NASA's success in reducing those costs over the long-term is the involvement of the private-sector incentives and disciplines--which is achieved only through the assumption of risk by the private sector, not through a traditional contractor relationship--is essential to achieve significant long-term cost reductions.

Experiment Needs and Facilities Study Appendix A Transient Reactor Test Facility (TREAT) Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The TREAT Upgrade effort is designed to provide significant new capabilities to satisfy experiment requirements associated with key LMFBR Safety Issues. The upgrade consists of reactor-core modifications to supply the physics performance needed for the new experiments, an Advanced TREAT loop with size and thermal-hydraulics capabilities needed for the experiments, associated interface equipment for loop operations and handling, and facility modifications necessary to accommodate operations with the Loop. The costs and schedules of the tasks to be accomplished under the TREAT Upgrade project are summarized. Cost, including contingency, is about 10 million dollars (1976 dollars). A schedule for execution ofmore » 36 months has been established to provide the new capabilities in order to provide timely support of the LMFBR national effort. A key requirement for the facility modifications is that the reactor availability will not be interrupted for more than 12 weeks during the upgrade. The Advanced TREAT loop is the prototype for the STF small-bundle package loop. Modified TREAT fuel elements contain segments of graphite-matrix fuel with graded uranium loadings similar to those of STF. In addition, the TREAT upgrade provides for use of STF-like stainless steel-UO{sub 2} TREAT fuel for tests of fully enriched fuel bundles. This report will introduce the Upgrade study by presenting a brief description of the scope, performance capability, safety considerations, cost schedule, and development requirements. This work is followed by a "Design Description". Because greatly upgraded loop performance is central to the upgrade, a description is given of Advanced TREAT loop requirements prior to description of the loop concept. Performance requirements of the upgraded reactor system are given. An extensive discussion of the reactor physics calculations performed for the Upgrade concept study is provided. Adequate physics performance is essential for performance of experiments with the Advanced TREAT loop, and the stress placed on these calculations reflects this. Additional material on performance and safety is provided. Backup calculations on calculations of plutonium-release limits are described. Cost and schedule information for the Upgrade are presented.« less

Removal performance of elemental mercury by low-cost adsorbents prepared through facile methods of carbonisation and activation of coconut husk.

PubMed

Johari, Khairiraihanna; Alias, Afidatul Shazwani; Saman, Norasikin; Song, Shiow Tien; Mat, Hanapi

2015-01-01

The preparation of chars and activated carbon as low-cost elemental mercury adsorbents was carried out through the carbonisation of coconut husk (pith and fibre) and the activation of chars with potassium hydroxide (KOH), respectively. The synthesised adsorbents were characterised by using scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption/desorption analysis. The elemental mercury removal performance was measured using a conventional flow type packed-bed adsorber. The physical and chemical properties of the adsorbents changed as a result of the carbonisation and activation process, hence affecting on the extent of elemental mercury adsorption. The highest elemental mercury (Hg°) adsorption capacity was obtained for the CP-CHAR (3142.57 µg g(-1)), which significantly outperformed the pristine and activated carbon adsorbents, as well as higher than some adsorbents reported in the literature. © The Author(s) 2014.

Determinants of Primary School Non-Enrollment and Absenteeism: Results from a Retrospective, Convergent Mixed Methods, Cohort Study in Rural Western Kenya

PubMed Central

King, Nia; Dewey, Cate; Borish, David

2015-01-01

Background Education is a key element in the socioeconomic development required to improve quality of life in Kenya. Despite the introduction of free primary education, primary school enrollment and attendance levels remain low. Drawing on qualitative and quantitative data, this study explores the determinants of non-enrollment and absenteeism in rural western Kenya and potential mitigation strategies to address these issues. Methods The study was conducted in Bwaliro village in rural western Kenya. A random sample of 64 students was obtained by blocking the village primary school’s student population according to grade level, gender, and orphan status. Qualitative and quantitative data were collected through interviews with parents, guardians, and key informants, and focus group discussions with students. Quantitative data were compared using chi-square tests, Student’s T-test, and Poisson regressions. Qualitative data were analyzed using thematic content analysis. Results Malaria, menstruation, and lack of money were among the most notable determinants of primary school dropout and absenteeism, and these factors disproportionately impacted orphans and female students. Potential mitigation strategies suggested by the community included provision of malaria treatment or prevention, reduction in education costs, expansion of the established school-feeding program, and provision of sanitary pads. Conclusion Despite free primary education, numerous factors continue to prevent children in rural western Kenya from attending primary school. The findings suggest that interventions should primarily target orphaned and female students. Prior to implementation, suggested mitigation strategies should be assessed for cost-effectiveness. PMID:26371885

The power of inexpensive satellite constellations

NASA Astrophysics Data System (ADS)

Dyrud, Lars P.; La Tour, Rose; Swartz, William H.; Nag, Sreeja; Lorentz, Steven R.; Hilker, Thomas; Wiscombe, Warren J.; Papadakis, Stergios J.

2014-06-01

Two thematic drivers are motivating the science community towards constellations of small satellites, the revelation that many next generation system science questions are uniquely addressed with sufficient numbers of simultaneous space based measurements, and the realization that space is historically expensive, and in an environment of constrained costs, we must innovate to ―do more with less‖. We present analysis that answers many of the key questions surrounding constellations of scientific satellites, including research that resulted from the GEOScan community based effort originally intended as hosted payloads on Iridium NEXT. We present analysis that answers the question how many satellites does global system science require? Perhaps serendipitously, the analyses show that many of the key science questions independently converge towards similar results, i.e. that approximately 60+ satellites are needed for transformative, as opposed to incremental capability in system science. The current challenge is how to effectively transition products from design to mass production for space based instruments and vehicles. Ideally, the lesson learned from past designs and builds of various space products should pave the way toward a better manufacturing plan that utilizes just a fraction of the prototype`s cost. Using the commercial products industry implementations of mass customization as an example, we will discuss about the benefits of standardization in design requirements for space instruments and vehicles. For example, the instruments (payloads) are designed to have standardized elements, components, or modules that interchangeably work together within a linkage system. We conclude with a discussion on implementation plans and the new paradigms for community and international cooperation enabled by small satellite constellations.

Secure Cryptographic Key Management System (CKMS) Considerations for Smart Grid Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abercrombie, Robert K; Sheldon, Frederick T; Aldridge, Hal

2011-01-01

In this paper, we examine some unique challenges associated with key management in the Smart Grid and concomitant research initiatives: 1) effectively model security requirements and their implementations, and 2) manage keys and key distribution for very large scale deployments such as Smart Meters over a long period of performance. This will set the stage to: 3) develop innovative, low cost methods to protect keying material, and 4) provide high assurance authentication services. We will present our perspective on key management and will discuss some key issues within the life cycle of a cryptographic key designed to achieve the following:more » 1) control systems designed, installed, operated, and maintained to survive an intentional cyber assault with no loss of critical function, and 2) widespread implementation of methods for secure communication between remote access devices and control centers that are scalable and cost-effective to deploy.« less

41 CFR 102-33.195 - Do we need an automated system to account for aircraft costs?

Code of Federal Regulations, 2011 CFR

2011-01-01

... system to account for aircraft costs? 102-33.195 Section 102-33.195 Public Contracts and Property... for the Cost of Government Aircraft § 102-33.195 Do we need an automated system to account for... automated system to account for aircraft costs by collecting the cost data elements required by the Federal...

A combined registration and finite element analysis method for fast estimation of intraoperative brain shift; phantom and animal model study.

PubMed

Mohammadi, Amrollah; Ahmadian, Alireza; Rabbani, Shahram; Fattahi, Ehsan; Shirani, Shapour

2017-12-01

Finite element models for estimation of intraoperative brain shift suffer from huge computational cost. In these models, image registration and finite element analysis are two time-consuming processes. The proposed method is an improved version of our previously developed Finite Element Drift (FED) registration algorithm. In this work the registration process is combined with the finite element analysis. In the Combined FED (CFED), the deformation of whole brain mesh is iteratively calculated by geometrical extension of a local load vector which is computed by FED. While the processing time of the FED-based method including registration and finite element analysis was about 70 s, the computation time of the CFED was about 3.2 s. The computational cost of CFED is almost 50% less than similar state of the art brain shift estimators based on finite element models. The proposed combination of registration and structural analysis can make the calculation of brain deformation much faster. Copyright © 2016 John Wiley & Sons, Ltd.

Designing new institutions for implementing integrated disaster risk management: key elements and future directions.

PubMed

Gopalakrishnan, Chennat; Okada, Norio

2007-12-01

The goal of integrated disaster risk management is to promote an overall improvement in the quality of safety and security in a region, city or community at disaster risk. This paper presents the case for a thorough overhaul of the institutional component of integrated disaster risk management. A review of disaster management institutions in the United States indicates significant weaknesses in their ability to contribute effectively to the implementation of integrated disaster risk management. Our analysis and findings identify eight key elements for the design of dynamic new disaster management institutions. Six specific approaches are suggested for incorporating the identified key elements in building new institutions that would have significant potential for enhancing the effective implementation of integrated disaster risk management. We have developed a possible blueprint for effective design and construction of efficient, sustainable and functional disaster management institutions.

Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

NASA Technical Reports Server (NTRS)

Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

1991-01-01

An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

Study of multi-kilowatt solar arrays for Earth orbit applications

NASA Technical Reports Server (NTRS)

Patterson, R. E.

1983-01-01

A miniaturized Cassegrainian concentrator (MCC) solar array concept is being developed with the objective of significantly reducing the recurring cost of multikilowatt solar arrays. The desired cost reduction is obtained as a result of using very small high efficiency solar cells in conjuction with low cost optics. The MCC single element concept incident slar radiation is reflected rom a primary parabolic reflector to a secondary hyperbolic reflector and finally to a 4 millimeter diameter solar cell. A light catcher cone is used to improve off axis performance. The solar cell is mounted to a heat fin. An element is approximately 13 millimeters thick which permits efficient launch stowage of the concentrator system panels without complex optical component deployments or retractions. The MCC elements are packed in bays within graphite epoxy frames and are electrically connected into appropriate series-parallel circuits. A MCC sngle element with a 21 sq cm entrance aperture and a 20 efficient, 0.25 sq cm gallium arsenide solar cell has the same power output as 30 sq cm of 11-percent efficiency (at 68 C) silicon solar cells.

Cost Analysis of Ten Allied Health Education Programs.

ERIC Educational Resources Information Center

Harper, Ronald L.; Gonyea, Meredith A.

The cost elements were identified and a methodology developed to analyze the total costs of allied health education programs and the cost per student for purposes of planning the allocation of scarce resources. The study was conducted by the Ohio State University School of Allied Medical Professions and focused on the following 10 allied health…

Cost Planning System

ERIC Educational Resources Information Center

Bowen, Brian

1974-01-01

The third installment of a Building Cost File points out the necessity of providing a framework for overall cost control during design. A cost analysis (see EA 504 571) illustrates how the use of construction elements or subsystems provide a suitable means. Other related articles are EA 503 949, 950, 951, and EA 504 578-579. (MF)

Yet Another Lunar Surface Geologic Exploration Architecture Concept (What, Again?): A Senior Field Geologist's Integrated View

NASA Technical Reports Server (NTRS)

Eppler, D. B.

2015-01-01

Lunar surface geological exploration should be founded on a number of key elements that are seemingly disparate, but which can form an integrated operational concept when properly conceived and deployed. If lunar surface geological exploration is to be useful, this integration of key elements needs to be undertaken throughout the development of both mission hardware, training and operational concepts. These elements include the concept of mission class, crew makeup and training, surface mobility assets that are matched with mission class, and field tools and IT assets that make data collection, sharing and archiving transparent to the surface crew.

Mechanics analysis of the multi-point-load process for the thin film solar cell

NASA Astrophysics Data System (ADS)

Wang, Zhiming; Wei, Guangpu; Gong, Zhengbang

2008-02-01

The main element of thin film solar cell is silicon. Because of the special mechanical characteristic of silicon, the method of loading pressure on the thin film solar cell and the value of pressure is the key problem which must be solved during the manufacturing of thin film solar cell. This paper describes the special mechanical characteristic of silicon, discussed the test method overall; value of pressure on thin film solar cell; the elements and the method of load by ANSYS finite element, according to these theory analysis, we obtained the key conclusion in the actual operation, these result have a great meaning in industry.

Responding to Recession: IT Funding and Cost Management in Higher Education. Key Findings

ERIC Educational Resources Information Center

Goldstein, Philip J.

2010-01-01

This document presents the key findings from "Responding to Recession: IT Funding and Cost Management in Higher Education", the 2010 ECAR (EDUCAUSE Center for Applied Research) study of how the economic recession is impacting information technology (IT) organizations and operations in higher education. The study was designed to address the…

36 CFR 72.45 - Fundable elements: Innovation grants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Fundable elements: Innovation..., Rehabilitation and Innovation § 72.45 Fundable elements: Innovation grants. (a) Innovation grants may cover costs... related to the provision of recreation opportunities. All equipment and supply requests in Innovation...

36 CFR 72.45 - Fundable elements: Innovation grants.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Fundable elements: Innovation..., Rehabilitation and Innovation § 72.45 Fundable elements: Innovation grants. (a) Innovation grants may cover costs... related to the provision of recreation opportunities. All equipment and supply requests in Innovation...

36 CFR 72.45 - Fundable elements: Innovation grants.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Fundable elements: Innovation..., Rehabilitation and Innovation § 72.45 Fundable elements: Innovation grants. (a) Innovation grants may cover costs... related to the provision of recreation opportunities. All equipment and supply requests in Innovation...

Daptomycin Resistance in Clinical MRSA Strains Is Associated with a High Biological Fitness Cost

PubMed Central

Roch, Melanie; Gagetti, Paula; Davis, James; Ceriana, Paola; Errecalde, Laura; Corso, Alejandra; Rosato, Adriana E.

2017-01-01

Daptomycin remains as one of the main treatment options for Methicillin-Resistant Staphylococcus aureus (MRSA). Sporadic resistance cases reported in patients treated with either daptomycin or glycopeptides are a growing concern. In a previous study, we described a clinical case of a patient with a community-acquired MRSA infection resistant to daptomycin and with intermediate resistance to vancomycin who developed a recurrent infection with a susceptible isogenic strain. In the present work, we further investigated the sequential events to determine whether the switch from a daptomycin resistance to a susceptible phenotype was due to a phenomenon of resistance reversion or recurrent infection with a susceptible strain. Pairwise competition experiments showed that the susceptible clinical recurrent SA6850 strain had increased fitness when compared to the resistant counterpart SA6820 strain. In fact, although we have demonstrated that reversion of daptomycin resistance to daptomycin susceptible can occur in vitro after serial passages in drug-free media, phylogenetic analysis suggested that the in vivo process was the result of a recurrent infection with a previous susceptible isolate carried by the patient rather than a resistance reversion of the strain. Whole genome sequence of evolved strains showed that daptomycin resistance in MRSA is associated with a high fitness cost mediated by mutations in mprF gene, revealed as a key element of the biological cost. Moreover, we determined that daptomycin resistance-associated fitness cost was independent of vancomycin intermediate resistance phenotype, as demonstrated in additional clinical MRSA vancomycin susceptible strains. This study highlights important observations as, despite daptomycin offers a useful treatment option for the patients with persistent infections, it has to be carefully monitored. The high fitness cost associated to daptomycin resistance may explain the reduced dissemination of daptomycin resistance and the absence of daptomycin reported outbreaks. PMID:29259579

Daptomycin Resistance in Clinical MRSA Strains Is Associated with a High Biological Fitness Cost.

PubMed

Roch, Melanie; Gagetti, Paula; Davis, James; Ceriana, Paola; Errecalde, Laura; Corso, Alejandra; Rosato, Adriana E

2017-01-01

Daptomycin remains as one of the main treatment options for Methicillin-Resistant Staphylococcus aureus (MRSA). Sporadic resistance cases reported in patients treated with either daptomycin or glycopeptides are a growing concern. In a previous study, we described a clinical case of a patient with a community-acquired MRSA infection resistant to daptomycin and with intermediate resistance to vancomycin who developed a recurrent infection with a susceptible isogenic strain. In the present work, we further investigated the sequential events to determine whether the switch from a daptomycin resistance to a susceptible phenotype was due to a phenomenon of resistance reversion or recurrent infection with a susceptible strain. Pairwise competition experiments showed that the susceptible clinical recurrent SA6850 strain had increased fitness when compared to the resistant counterpart SA6820 strain. In fact, although we have demonstrated that reversion of daptomycin resistance to daptomycin susceptible can occur in vitro after serial passages in drug-free media, phylogenetic analysis suggested that the in vivo process was the result of a recurrent infection with a previous susceptible isolate carried by the patient rather than a resistance reversion of the strain. Whole genome sequence of evolved strains showed that daptomycin resistance in MRSA is associated with a high fitness cost mediated by mutations in mprF gene, revealed as a key element of the biological cost. Moreover, we determined that daptomycin resistance-associated fitness cost was independent of vancomycin intermediate resistance phenotype, as demonstrated in additional clinical MRSA vancomycin susceptible strains. This study highlights important observations as, despite daptomycin offers a useful treatment option for the patients with persistent infections, it has to be carefully monitored. The high fitness cost associated to daptomycin resistance may explain the reduced dissemination of daptomycin resistance and the absence of daptomycin reported outbreaks.

The nine-year sustained cost-containment impact of swiss pilot physicians-pharmacists quality circles.

PubMed

Niquille, Anne; Ruggli, Martine; Buchmann, Michel; Jordan, Dominique; Bugnon, Olivier

2010-04-01

Six pioneer physicians-pharmacists quality circles (PPQCs) located in the Swiss canton of Fribourg (administratively corresponding to a state in the US) were under the responsibility of 6 trained community pharmacists moderating the prescribing process of 24 general practitioners (GPs). PPQCs are based on a multifaceted collaborative process mediated by community pharmacists for improving compliance with clinical guidelines within GPs' prescribing practices. To assess, over a 9-year period (1999-2007), the cost-containment impact of the PPQCs. The key elements of PPQCs are a structured continuous quality improvement and education process; local networking; feedback of comparative and detailed data regarding costs, drug choice, and frequency of prescribed drugs; and structured independent literature review for interdisciplinary continuing education. The data are issued from the community pharmacy invoices to the health insurance companies. The study analyzed the cost-containment impact of the PPQCs in comparison with GPs working in similar conditions of care without particular collaboration with pharmacists, the percentage of generic prescriptions for specific cardiovascular drug classes, and the percentage of drug costs or units prescribed for specific cardiovascular drugs. For the 9-year period, there was a 42% decrease in the drug costs in the PPQC group as compared to the control group, representing a $225,000 (USD) savings per GP only in 2007. These results are explained by better compliance with clinical and pharmacovigilance guidelines, larger distribution of generic drugs, a more balanced attitude toward marketing strategies, and interdisciplinary continuing education on the rational use of drugs. The PPQC work process has yielded sustainable results, such as significant cost savings, higher penetration of generics and reflection on patient safety, and the place of "new" drugs in therapy. The PPQCs may also constitute a solid basis for implementing more comprehensive collaborative programs, such as medication reviews, adherence-enhancing interventions, or disease management approaches.

Costs of care in a mild-to-moderate Alzheimer clinical trial sample: key resources and their determinants.

PubMed

Gustavsson, Anders; Cattelin, Francoise; Jönsson, Linus

2011-07-01

Costs of care are frequently included as secondary endpoint in Alzheimer clinical trials because payers demand evidence of the budgetary effects of novel therapies. Future clinical trial protocols can be optimized on the basis of the currently available data, including what are the key resources and how are they correlated to disease severity measures. Primary patient-level data from two 18 months clinical trials of a putative disease modifier in mild-to-moderate Alzheimer's disease (n = 2,744) were analyzed to identify key components of costs of care and their determinants in a clinical trial setting. Costs of care were assessed with the resource utilization in dementia Lite (RUD) instrument, which includes patient accommodation, informal care, community care, and hospitalizations. The contribution of each component to total costs of care and their correlation with one another and key disease severity measures (Alzheimer's Disease Assessment Scale--Cognitive Subscale, Mini-Mental State Examination, Clinical Dementia Rating-Sum of Boxes, Alzheimer's Disease Cooperative Study--Activities of Daily Living Inventory, and Neuropsychiatric Inventory Questionnaire) was explored. Informal care constituted 82% to 86% of the total costs of care over the 18-months trial and community care services and patient accommodation contributed 6% to 8% each. Informal care was positively correlated with hospitalizations but negatively to patient accommodation, indicating that these services are supplements. Informal care also had the strongest pair-wise correlation with key disease severity measures, suggesting a higher chance of identifying a treatment effect on this component. ADL-ability (Alzheimer's Disease Cooperative Study--Activities of Daily Living Inventory) was the strongest predictor of costs of care of all disease severity measures. Informal care is the most important component of costs of care in a mild-to-moderate Alzheimer clinical trial sample, and it is primarily driven by the ADL-ability of the patient. Investigators should focus on the assessment of this economic endpoint because a significant treatment effect on this resource is likely to also affect total costs of care. Copyright © 2011 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Family Expense Manager Application in Android

NASA Astrophysics Data System (ADS)

Rajaprabha, M. N.

2017-11-01

FAMILY EXPENSES MANAGER is an android application. This monitors your own costs, family costs and incidental costs. This resembles a present day costs day book in your versatile. This application helps you to monitor your every day costs, settlement points of interest, general rundown, report in detail and periodic costs subtle elements. Every one of the information is put away in database and can be recovered by the client and their relatives.

Cost Estimating Relationships for U.S. Navy Ships

DTIC Science & Technology

1983-09-01

ORGANIZATION NAME AND ADDRESS Institute for Defense Analyses iBOl North Beauregard Street Alexandria, Virginia 22311 10. PROGRAM ELEMENT, PROJECT ...linear CER also is displayed. In addi- tion. Table S-1 displays the total observed cost, the total estimated cost, and the percent difference...report provided by program year a total end cost for each ship by hull number including outfitting and post delivery costs. This end cost does not

Highway safety data : costs, quality, and strategies for improvement, final report.

DOT National Transportation Integrated Search

1998-01-01

The goal of this project was to analyze the collection and management of highway safety data by identifying issues and costs, and proposing means of resolving those issues and reducing the costs. Initial emphasis addressed known elements of the highw...

Highway Safety Data : costs, quality, and strategies for improvement : research report

DOT National Transportation Integrated Search

1998-01-01

The goal of this project was to analyze the collection and management of highway safety data by identifying issues and costs, and proposing means of resolving those issues and reducing the costs. Initial emphasis addressed known elements of the highw...

CONSTRUCTION OF NUCLEAR FUEL ELEMENTS

DOEpatents

Weems, S.J.

1963-09-24

>A rib arrangement and an end construction for nuclearfuel elements laid end to end in a coolant tube are described. The rib arrangement is such that each fuel element, when separated from other fuel elements, fits loosely in the coolant tube and so can easily be inserted or withdrawn from the tube. The end construction of the fuel elements is such that the fuel elements when assembled end to end are keyed against relative rotation, and the ribs of each fuel element cooperate with the ribs of the adjacent fuel elements to give the assembled fuel elements a tight fit with the coolant tube. (AEC)

Technology Benefit Estimator (T/BEST): User's Manual

NASA Technical Reports Server (NTRS)

Generazio, Edward R.; Chamis, Christos C.; Abumeri, Galib

1994-01-01

The Technology Benefit Estimator (T/BEST) system is a formal method to assess advanced technologies and quantify the benefit contributions for prioritization. T/BEST may be used to provide guidelines to identify and prioritize high payoff research areas, help manage research and limited resources, show the link between advanced concepts and the bottom line, i.e., accrued benefit and value, and to communicate credibly the benefits of research. The T/BEST software computer program is specifically designed to estimating benefits, and benefit sensitivities, of introducing new technologies into existing propulsion systems. Key engine cycle, structural, fluid, mission and cost analysis modules are used to provide a framework for interfacing with advanced technologies. An open-ended, modular approach is used to allow for modification and addition of both key and advanced technology modules. T/BEST has a hierarchical framework that yields varying levels of benefit estimation accuracy that are dependent on the degree of input detail available. This hierarchical feature permits rapid estimation of technology benefits even when the technology is at the conceptual stage. As knowledge of the technology details increases the accuracy of the benefit analysis increases. Included in T/BEST's framework are correlations developed from a statistical data base that is relied upon if there is insufficient information given in a particular area, e.g., fuel capacity or aircraft landing weight. Statistical predictions are not required if these data are specified in the mission requirements. The engine cycle, structural fluid, cost, noise, and emissions analyses interact with the default or user material and component libraries to yield estimates of specific global benefits: range, speed, thrust, capacity, component life, noise, emissions, specific fuel consumption, component and engine weights, pre-certification test, mission performance engine cost, direct operating cost, life cycle cost, manufacturing cost, development cost, risk, and development time. Currently, T/BEST operates on stand-alone or networked workstations, and uses a UNIX shell or script to control the operation of interfaced FORTRAN based analyses. T/BEST's interface structure works equally well with non-FORTRAN or mixed software analysis. This interface structure is designed to maintain the integrity of the expert's analyses by interfacing with expert's existing input and output files. Parameter input and output data (e.g., number of blades, hub diameters, etc.) are passed via T/BEST's neutral file, while copious data (e.g., finite element models, profiles, etc.) are passed via file pointers that point to the expert's analyses output files. In order to make the communications between the T/BEST's neutral file and attached analyses codes simple, only two software commands, PUT and GET, are required. This simplicity permits easy access to all input and output variables contained within the neutral file. Both public domain and proprietary analyses codes may be attached with a minimal amount of effort, while maintaining full data and analysis integrity, and security. T/BESt's sotware framework, status, beginner-to-expert operation, interface architecture, analysis module addition, and key analysis modules are discussed. Representative examples of T/BEST benefit analyses are shown.

Technology Benefit Estimator (T/BEST): User's manual

NASA Astrophysics Data System (ADS)

Generazio, Edward R.; Chamis, Christos C.; Abumeri, Galib

1994-12-01

The Technology Benefit Estimator (T/BEST) system is a formal method to assess advanced technologies and quantify the benefit contributions for prioritization. T/BEST may be used to provide guidelines to identify and prioritize high payoff research areas, help manage research and limited resources, show the link between advanced concepts and the bottom line, i.e., accrued benefit and value, and to communicate credibly the benefits of research. The T/BEST software computer program is specifically designed to estimating benefits, and benefit sensitivities, of introducing new technologies into existing propulsion systems. Key engine cycle, structural, fluid, mission and cost analysis modules are used to provide a framework for interfacing with advanced technologies. An open-ended, modular approach is used to allow for modification and addition of both key and advanced technology modules. T/BEST has a hierarchical framework that yields varying levels of benefit estimation accuracy that are dependent on the degree of input detail available. This hierarchical feature permits rapid estimation of technology benefits even when the technology is at the conceptual stage. As knowledge of the technology details increases the accuracy of the benefit analysis increases. Included in T/BEST's framework are correlations developed from a statistical data base that is relied upon if there is insufficient information given in a particular area, e.g., fuel capacity or aircraft landing weight. Statistical predictions are not required if these data are specified in the mission requirements. The engine cycle, structural fluid, cost, noise, and emissions analyses interact with the default or user material and component libraries to yield estimates of specific global benefits: range, speed, thrust, capacity, component life, noise, emissions, specific fuel consumption, component and engine weights, pre-certification test, mission performance engine cost, direct operating cost, life cycle cost, manufacturing cost, development cost, risk, and development time. Currently, T/BEST operates on stand-alone or networked workstations, and uses a UNIX shell or script to control the operation of interfaced FORTRAN based analyses. T/BEST's interface structure works equally well with non-FORTRAN or mixed software analysis. This interface structure is designed to maintain the integrity of the expert's analyses by interfacing with expert's existing input and output files. Parameter input and output data (e.g., number of blades, hub diameters, etc.) are passed via T/BEST's neutral file, while copious data (e.g., finite element models, profiles, etc.) are passed via file pointers that point to the expert's analyses output files. In order to make the communications between the T/BEST's neutral file and attached analyses codes simple, only two software commands, PUT and GET, are required. This simplicity permits easy access to all input and output variables contained within the neutral file. Both public domain and proprietary analyses codes may be attached with a minimal amount of effort, while maintaining full data and analysis integrity, and security.

Prediction of Geomagnetic Activity and Key Parameters in High-Latitude Ionosphere-Basic Elements

NASA Technical Reports Server (NTRS)

Lyatsky, W.; Khazanov, G. V.

2007-01-01

Prediction of geomagnetic activity and related events in the Earth's magnetosphere and ionosphere is an important task of the Space Weather program. Prediction reliability is dependent on the prediction method and elements included in the prediction scheme. Two main elements are a suitable geomagnetic activity index and coupling function -- the combination of solar wind parameters providing the best correlation between upstream solar wind data and geomagnetic activity. The appropriate choice of these two elements is imperative for any reliable prediction model. The purpose of this work was to elaborate on these two elements -- the appropriate geomagnetic activity index and the coupling function -- and investigate the opportunity to improve the reliability of the prediction of geomagnetic activity and other events in the Earth's magnetosphere. The new polar magnetic index of geomagnetic activity and the new version of the coupling function lead to a significant increase in the reliability of predicting the geomagnetic activity and some key parameters, such as cross-polar cap voltage and total Joule heating in high-latitude ionosphere, which play a very important role in the development of geomagnetic and other activity in the Earth s magnetosphere, and are widely used as key input parameters in modeling magnetospheric, ionospheric, and thermospheric processes.

High Cost/High Risk Components to Chalcogenide Molded Lens Model: Molding Preforms and Mold Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernacki, Bruce E.

2012-10-05

This brief report contains a critique of two key components of FiveFocal's cost model for glass compression molding of chalcogenide lenses for infrared applications. Molding preforms and mold technology have the greatest influence on the ultimate cost of the product and help determine the volumes needed to select glass molding over conventional single-point diamond turning or grinding and polishing. This brief report highlights key areas of both technologies with recommendations for further study.

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies

NASA Technical Reports Server (NTRS)

1974-01-01

The key issues in the Earth Observatory Satellite (EOS) program which are subject to configuration study and tradeoff are identified. The issue of a combined operational and research and development program is considered. It is stated that cost and spacecraft weight are the key design variables and design options are proposed in terms of these parameters. A cost analysis of the EOS program is provided. Diagrams of the satellite configuration and subsystem components are included.

Mining key elements for severe convection prediction based on CNN

NASA Astrophysics Data System (ADS)

Liu, Ming; Pan, Ning; Zhang, Changan; Sha, Hongzhou; Zhang, Bolei; Liu, Liang; Zhang, Meng

2017-04-01

Severe convective weather is a kind of weather disasters accompanied by heavy rainfall, gust wind, hail, etc. Along with recent developments on remote sensing and numerical modeling, there are high-volume and long-term observational and modeling data accumulated to capture massive severe convective events over particular areas and time periods. With those high-volume and high-variety weather data, most of the existing studies and methods carry out the dynamical laws, cause analysis, potential rule study, and prediction enhancement by utilizing the governing equations from fluid dynamics and thermodynamics. In this study, a key-element mining method is proposed for severe convection prediction based on convolution neural network (CNN). It aims to identify the key areas and key elements from huge amounts of historical weather data including conventional measurements, weather radar, satellite, so as numerical modeling and/or reanalysis data. Under this manner, the machine-learning based method could help the human forecasters on their decision-making on operational weather forecasts on severe convective weathers by extracting key information from the real-time and historical weather big data. In this paper, it first utilizes computer vision technology to complete the data preprocessing work of the meteorological variables. Then, it utilizes the information such as radar map and expert knowledge to annotate all images automatically. And finally, by using CNN model, it cloud analyze and evaluate each weather elements (e.g., particular variables, patterns, features, etc.), and identify key areas of those critical weather elements, then help forecasters quickly screen out the key elements from huge amounts of observation data by current weather conditions. Based on the rich weather measurement and model data (up to 10 years) over Fujian province in China, where the severe convective weathers are very active during the summer months, experimental tests are conducted with the new machine-learning method via CNN models. Based on the analysis of those experimental results and case studies, the proposed new method have below benefits for the severe convection prediction: (1) helping forecasters to narrow down the scope of analysis and saves lead-time for those high-impact severe convection; (2) performing huge amount of weather big data by machine learning methods rather relying on traditional theory and knowledge, which provide new method to explore and quantify the severe convective weathers; (3) providing machine learning based end-to-end analysis and processing ability with considerable scalability on data volumes, and accomplishing the analysis work without human intervention.

Cost Modeling for low-cost planetary missions

NASA Technical Reports Server (NTRS)

Kwan, Eric; Habib-Agahi, Hamid; Rosenberg, Leigh

2005-01-01

This presentation will provide an overview of the JPL parametric cost models used to estimate flight science spacecrafts and instruments. This material will emphasize the cost model approaches to estimate low-cost flight hardware, sensors, and instrumentation, and to perform cost-risk assessments. This presentation will also discuss JPL approaches to perform cost modeling and the methodologies and analyses used to capture low-cost vs. key cost drivers.

CZTSSe: Materials and Physics Challenges

NASA Astrophysics Data System (ADS)

Gunawan, Oki

2011-03-01

Thin-film photovoltaic (PV) technologies led by CdTe and Cu(In,Ga) Se 2 (CIGS) are enjoying growing market share, due to their high performance and cost competitiveness, in the quest for renewable energy for the future. However the reliance on non-earth abundant elements tellurium and indium in these technologies presents a potential obstacle to ultimate terawatt deployment. We recently demonstrated kesterite Cu 2 ZnSn(Se,S)4 (CZTSSe) solar cells, comprised of the earth abundant metals copper, zinc and tin, with world record efficiency of 9.7%. In this talk we present a comprehensive device characterization study that pinpoints the key performance bottlenecks in these cells. We find strong buffer-absorber interface recombination and low minority carrier lifetimes that limit the open circuit voltage and a high and diverging device series resistance at lower temperature that suggests a blocking back contact that may limit the fill factor. These findings help to identify key areas for improvement for these CZTSSe cells in the pursuit of a high performance terawatt-scalable PV technology. In collaboration with Teodor K. Todorov, Aaron Barkhouse, Kejia Wang, David B. Mitzi, Supratik Guha, IBM T J Watson Research Center.

Shared decision making in the United States: policy and implementation activity on multiple fronts.

PubMed

Frosch, Dominick L; Moulton, Benjamin W; Wexler, Richard M; Holmes-Rovner, Margaret; Volk, Robert J; Levin, Carrie A

2011-01-01

Shared decision making in the United States has become an important element in health policy debates. The recently passed federal health care reform legislation includes several key provisions related to shared decision making (SDM) and patient decision support. Several states have passed or are considering legislation that incorporates SDM as a key component of improved health care provision. Research on SDM is funded by a range of public and private organizations. Non-profit, for-profit, academic and government organizations are developing decision support interventions for numerous conditions. Some interventions are publicly available; others are distributed to patients through health insurance and healthcare providers. A significant number of clinical implementation projects are underway to test and evaluate different ways of incorporating SDM and patient decision support into routine clinical care. Numerous professional organizations are advocating for SDM and social networking efforts are increasing their advocacy as well. Policy makers are intrigued by the potential of SDM to improve health care provision and potentially lower costs. The role of shared decision making in policy and practice will be part of the larger health care reform debate. 2011. Published by Elsevier GmbH.

Space Technology for the Iron Foundry

NASA Technical Reports Server (NTRS)

1990-01-01

Electric Power Research Institute (EPRI) initiated development of a plasma melter intended to solve a major problem in the U.S. foundry industry. EPRI is a non-profit organization that manages research and development for some 600 electric utility member companies. For the plasma melter program, EPRI enlisted as co-sponsors Westinghouse Electric's Environmental Systems and Services Division, General Motors Corporation, and Modern Equipment Company, supplier of equipment and services to the foundry industry. General Motor's plasma melter, first in the U.S., is an advanced technology system designed to improve the efficiency of coke-burning cupolas that melt iron to produce automotive castings. The key elements are six Westinghouse plasma torches. Electrically-powered plasma torch creates an ionized gas that superheats air entering the cupola to 10,000 degrees Fahrenheit. That great heat, three times higher than that attainable by oil or natural gas systems, is the key to making iron cheaper, cleaner, and faster. System offers an environmental bonus in reduced cupola emissions. Plasma torches increase GM's electric bill at Defiance, but that cost is more than compensated by the savings in charge material. The EPRI-sponsored Center for Materials Production (CMP) is evaluating the potential of plasma cupola technology.

Exo-C: A Space Mission for Direct Imaging and Spectroscopy of Extrasolar Planetary Systems

NASA Technical Reports Server (NTRS)

Stapelfeldt, Karl; Belikov, Ruslan; Marley, Mark; Bryden, Geoff; Serabyn, Eugene; Trauger, John; Cahoy, Kerri; Chakrabarti, Supriya; McElwain, Michael; Meadows, Victoria;

Review of Biojet Fuel Conversion Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Wei-Cheng; Tao, Ling; Markham, Jennifer

Biomass-derived jet (biojet) fuel has become a key element in the aviation industry’s strategy to reduce operating costs and environmental impacts. Researchers from the oil-refining industry, the aviation industry, government, biofuel companies, agricultural organizations, and academia are working toward developing commercially viable and sustainable processes that produce long-lasting renewable jet fuels with low production costs and low greenhouse gas emissions. Additionally, jet fuels must meet ASTM International specifications and potentially be a 100% drop-in replacement for the current petroleum jet fuel. The combustion characteristics and engine tests demonstrate the benefits of running the aviation gas turbine with biojet fuels. Inmore » this study, the current technologies for producing renewable jet fuels, categorized by alcohols-to-jet, oil-to-jet, syngas-to-jet, and sugar-to-jet pathways, are reviewed. The main challenges for each technology pathway, including feedstock availability, conceptual process design, process economics, life-cycle assessment of greenhouse gas emissions, and commercial readiness, are discussed. Although the feedstock price and availability and energy intensity of the process are significant barriers, biomass-derived jet fuel has the potential to replace a significant portion of conventional jet fuel required to meet commercial and military demand.« less

Demonstration of innovative monitoring technologies at the Savannah River Integrated Demonstration Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rossabi, J.; Jenkins, R.A.; Wise, M.B.

1993-12-31

The Department of Energy`s Office of Technology Development initiated an Integrated Demonstration Program at the Savannah River Site in 1989. The objective of this program is to develop, demonstrate, and evaluate innovative technologies that can improve present-day environmental restoration methods. The Integrated Demonstration Program at SRS is entitled ``Cleanup of Organics in Soils and Groundwater at Non-Arid Sites.`` New technologies in the areas of drilling, characterization, monitoring, and remediation are being demonstrated and evaluated for their technical performance and cost effectiveness in comparison with baseline technologies. Present site characterization and monitoring methods are costly, time-consuming, overly invasive, and often imprecise.more » Better technologies are required to accurately describe the subsurface geophysical and geochemical features of a site and the nature and extent of contamination. More efficient, nonintrusive characterization and monitoring techniques are necessary for understanding and predicting subsurface transport. More reliable procedures are also needed for interpreting monitoring and characterization data. Site characterization and monitoring are key elements in preventing, identifying, and restoring contaminated sites. The remediation of a site cannot be determined without characterization data, and monitoring may be required for 30 years after site closure.« less

Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design

PubMed Central

Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

2015-01-01

The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms. PMID:25583870

Advanced millimeter-wave security portal imaging techniques

NASA Astrophysics Data System (ADS)

Sheen, David M.; Bernacki, Bruce E.; McMakin, Douglas L.

2012-03-01

Millimeter-wave (mm-wave) imaging is rapidly gaining acceptance as a security tool to augment conventional metal detectors and baggage x-ray systems for passenger screening at airports and other secured facilities. This acceptance indicates that the technology has matured; however, many potential improvements can yet be realized. The authors have developed a number of techniques over the last several years including novel image reconstruction and display techniques, polarimetric imaging techniques, array switching schemes, and high-frequency high-bandwidth techniques. All of these may improve the performance of new systems; however, some of these techniques will increase the cost and complexity of the mm-wave security portal imaging systems. Reducing this cost may require the development of novel array designs. In particular, RF photonic methods may provide new solutions to the design and development of the sequentially switched linear mm-wave arrays that are the key element in the mm-wave portal imaging systems. Highfrequency, high-bandwidth designs are difficult to achieve with conventional mm-wave electronic devices, and RF photonic devices may be a practical alternative. In this paper, the mm-wave imaging techniques developed at PNNL are reviewed and the potential for implementing RF photonic mm-wave array designs is explored.

Successful implementation of a guideline program for the rational use of lipid-lowering drugs.

PubMed

Stuart, M E; Handley, M A; Chamberlain, M A; Wallach, R W; Penna, P M; Stergachis, A

1991-01-01

Following the National Cholesterol Educational Program's (NCEP) 1988 screening and treatment recommendations, an educational and behavior-change program at Group Health Cooperative of Puget Sound (GHC) was developed to guide the use of lipid-lowering drugs within the larger context of cardiac risk reduction. The program has been successful in advancing a rational program to enhance care and manage costs of the use of lipid-lowering agents at GHC. Cost savings have been significant over the past two years. The educational design of the program includes training and ongoing education of a core group of "lipid gurus," who educate colleagues in area medical centers in a rational approach to hyperlipidemia. Patient education and patient participation in decision-making was emphasized. Program evaluation has demonstrated that physicians and patients are satisfied with the program, and inappropriate drug expenditures have been prevented. Key elements of the program include a critical review of outcome studies in the medical literature, use of information systems, algorithms and written materials organized into a well-designed, ongoing educational program, and development of a core group of physicians and pharmacists to administer the program at the clinic level.

Investigation of test methods, material properties, and processes for solar cell encapsulants. Encapsulation task of the low-cost silicon solar array project

NASA Technical Reports Server (NTRS)

1977-01-01

During this quarter, flat-plate solar collector systems were considered and six basic construction elements were identified: outer coatings, superstrates, pottants, substrates, undercoats, and adhesives. Materials surveys were then initiated to discover either generic classes or/and specific products to function as each construction element. Cost data included in the surveys permit ready evaluation of each material. Silicones, fluorocarbons, glass, and acrylic polymers have the highest inherent weatherability of materials studied to date. Only acrylics, however, combine low costs, environmental resistance, and potential processability. This class will receive particular emphasis.