Forcing Cesium into Higher Oxidation States Using Useful hard x-ray Induced Chemistry under High Pressure

NASA Astrophysics Data System (ADS)

Sneed, D.; Pravica, M.; Kim, E.; Chen, N.; Park, C.; White, M.

2017-10-01

This paper discusses our attempt to synthesize higher oxidation forms of cesium fluoride by pressurizing cesium fluoride in a fluorine-rich environment created via the x-ray decomposition of potassium tetrafluoroborate. This was done in order to confirm recent theoretical predictions of higher oxidation forms of CsFn. We discuss the development of a technique to produce molecular fluorine in situ via useful hard x-ray photochemistry, and the attempt to utilize this technique to form higher oxidation states of cesium fluoride. In order to verify the formation of the novel stoichiometric species of CsFn. X-ray Absorption Near Edge Spectroscopy (XANES) centered on the cesium K-edge was performed to probe the oxidation state of cesium as well as the local molecular coordination around Cs.

Thermal considerations in the cryogenic regime for the BNL double ridge higher order mode waveguide

DOE PAGES

Ravikumar, Dhananjay K.; Than, Yatming; Xu, Wencan; ...

2017-09-06

Brookhaven National Laboratory (BNL) has proposed to build an electron ion collider (EIC) as an upgrade to the existing Relativistic Heavy Ion Collider (RHIC). One part of the new design is to use superconducting radio frequency (SRF) cavities for acceleration, which sit in a bath of superfluid helium at a temperature of 2 K. SRF cavities designed for the BNL EIC create a standing electromagnetic wave, oscillating at a fundamental frequency of 647 MHz. Interaction of the charged particle beam with the EM field in the cavity creates higher order modes (HOM) of oscillation which have adverse effects on themore » beam when allowed to propagate down the beam tube. HOM waveguides are thus designed to remove this excess energy which is then damped at room temperature. Thus, these waveguides provide a direct thermal link between room temperature and the superconducting cavities adding a static thermal load. The EM wave propagating through the warmer sections of the waveguide creates an additional dynamic thermal load. This study calculates these thermal loads, concluding that the dynamic load is small in comparison to the static load. Temperature distributions are mapped on the waveguide and the number of heat intercepts required to efficiently manage thermal loads have been determined. Additonally, a thermal radiation study has been performed and it is found that this contribution is around three orders of magnitude smaller than the static conduction and dynamic loads.« less

Thermal considerations in the cryogenic regime for the BNL double ridge higher order mode waveguide

NASA Astrophysics Data System (ADS)

Ravikumar, Dhananjay K.; Than, Yatming; Xu, Wencan; Longtin, Jon

2017-09-01

Brookhaven National Laboratory (BNL) has proposed to build an electron ion collider (EIC) as an upgrade to the existing Relativistic Heavy Ion Collider (RHIC). A part of the new design is to use superconducting radio frequency (SRF) cavities for acceleration, which sit in a bath of superfluid helium at a temperature of 2 K. SRF cavities designed for the BNL EIC create a standing electromagnetic wave, oscillating at a fundamental frequency of 647 MHz. Interaction of the charged particle beam with the EM field in the cavity creates higher order modes (HOM) of oscillation which have adverse effects on the beam when allowed to propagate down the beam tube. HOM waveguides are thus designed to remove this excess energy which is then damped at room temperature. As a result, these waveguides provide a direct thermal link between room temperature and the superconducting cavities adding a static thermal load. The EM wave propagating through the warmer sections of the waveguide creates an additional dynamic thermal load. This study calculates these thermal loads, concluding that the dynamic load is small in comparison to the static load. Temperature distributions are mapped on the waveguide and the number of heat intercepts required to efficiently manage thermal loads have been determined. In addition, a thermal radiation study has been performed and it is found that this contribution is around three orders of magnitude smaller than the static conduction and dynamic loads.

Thermal considerations in the cryogenic regime for the BNL double ridge higher order mode waveguide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ravikumar, Dhananjay K.; Than, Yatming; Xu, Wencan

Brookhaven National Laboratory (BNL) has proposed to build an electron ion collider (EIC) as an upgrade to the existing Relativistic Heavy Ion Collider (RHIC). One part of the new design is to use superconducting radio frequency (SRF) cavities for acceleration, which sit in a bath of superfluid helium at a temperature of 2 K. SRF cavities designed for the BNL EIC create a standing electromagnetic wave, oscillating at a fundamental frequency of 647 MHz. Interaction of the charged particle beam with the EM field in the cavity creates higher order modes (HOM) of oscillation which have adverse effects on themore » beam when allowed to propagate down the beam tube. HOM waveguides are thus designed to remove this excess energy which is then damped at room temperature. Thus, these waveguides provide a direct thermal link between room temperature and the superconducting cavities adding a static thermal load. The EM wave propagating through the warmer sections of the waveguide creates an additional dynamic thermal load. This study calculates these thermal loads, concluding that the dynamic load is small in comparison to the static load. Temperature distributions are mapped on the waveguide and the number of heat intercepts required to efficiently manage thermal loads have been determined. Additonally, a thermal radiation study has been performed and it is found that this contribution is around three orders of magnitude smaller than the static conduction and dynamic loads.« less

SurveyWiz and factorWiz: JavaScript Web pages that make HTML forms for research on the Internet.

PubMed

Birnbaum, M H

2000-05-01

SurveyWiz and factorWiz are Web pages that act as wizards to create HTML forms that enable one to collect data via the Web. SurveyWiz allows the user to enter survey questions or personality test items with a mixture of text boxes and scales of radio buttons. One can add demographic questions of age, sex, education, and nationality with the push of a button. FactorWiz creates the HTML for within-subjects, two-factor designs as large as 9 x 9, or higher order factorial designs up to 81 cells. The user enters levels of the row and column factors, which can be text, images, or other multimedia. FactorWiz generates the stimulus combinations, randomizes their order, and creates the page. In both programs HTML is displayed in a window, and the user copies it to a text editor to save it. When uploaded to a Web server and supported by a CGI script, the created Web pages allow data to be collected, coded, and saved on the server. These programs are intended to assist researchers and students in quickly creating studies that can be administered via the Web.

A weighted higher-order network analysis of fine particulate matter (PM2.5) transport in Yangtze River Delta

NASA Astrophysics Data System (ADS)

Wang, Yufang; Wang, Haiyan; Zhang, Shuhua

2018-04-01

Specification of PM2.5 transmission characteristics is important for pollution control, policymaking and prediction. In this paper, we propose weights for motif instances, thereby to implement a weighted higher-order clustering algorithm for a weighted, directed PM2.5 network in the Yangtze River Delta (YRD) of China. The weighted, directed network we create in this paper includes information on meteorological conditions of wind speed and wind direction, plus data on geographic distance and PM2.5 concentrations. We aim to reveal PM2.5 mobility between cities in the YRD. Major potential PM2.5 contributors and closely interacted clusters are identified in the network of 178 air quality stations in the YRD. To our knowledge, it is the first work to incorporate weight information into the higher-order network analysis to study PM2.5 transport.

Wisconsin Technical College Presidential Perspectives on Leading Organizational Change

ERIC Educational Resources Information Center

Borowicz, Laurie S.

2012-01-01

This qualitative study examines leadership perceptions of attributes needed for effectively leading organizations within and through change. Current change forces substantiate the need for higher educational institutions to change in order to fulfill their missions. Creating a culture of organizational change presents a leadership challenge. The…

Forcing Cesium into Higher Oxidation States Using Useful hard x-ray Induced Chemistry under High Pressure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sneed, D.; Pravica, M.; Kim, E.

This paper discusses our attempt to synthesize higher oxidation forms of cesium fluoride by pressurizing cesium fluoride in a fluorine-rich environment created via the x-ray decomposition of potassium tetrafluoroborate. This was done in order to confirm recent theoretical predictions of higher oxidation forms of CsFn. We discuss the development of a technique to produce molecular fluorine in situ via useful hard x-ray photochemistry, and the attempt to utilize this technique to form higher oxidation states of cesium fluoride. In order to verify the formation of the novel stoichiometric species of CsFn. X-ray Absorption Near Edge Spectroscopy (XANES) centered on themore » cesium K-edge was performed to probe the oxidation state of cesium as well as the local molecular coordination around Cs.« less

Design and Implementation of the Game-Design and Learning Program

ERIC Educational Resources Information Center

Akcaoglu, Mete

2016-01-01

Design involves solving complex, ill-structured problems. Design tasks are consequently, appropriate contexts for children to exercise higher-order thinking and problem-solving skills. Although creating engaging and authentic design contexts for young children is difficult within the confines of traditional schooling, recently, game-design has…

Cooperative Education in New Mexico.

ERIC Educational Resources Information Center

New Mexico Commission on Higher Education.

In 1988, the State Legislature created the New Mexico Cooperative Program to develop and expand cooperative education (co-op) programs. The Commission on Higher Education (CHE) was designated to help institutions establish and expand programs and collect information. For reporting purposes, CHE required that, in order to be considered co-op, work…

Start with Higher-Order Thinking

ERIC Educational Resources Information Center

Brookhart, Susan M.

2016-01-01

"Memorizing facts is boring. Drill-and-practice is boring. But thinking, for most students most of the time, is actually fun," writes Susan M. Brookhart. The author recommends that teachers build interest and engagement into every lesson plan by creating opportunities for deep thinking. She describes three strategies to accomplish this.…

Strategic and Bonding Effects of Enhancing the Student Feedback Process

ERIC Educational Resources Information Center

Robinson, Nadine M.; Celuch, Kevin G.

2016-01-01

In order to produce distinctiveness that leads to competitive advantage, higher education institutions must remain cognizant that students are co-creators. Thus, to create genuine value in educational service delivery, there is a need for a more highly developed understanding of the student-institutional intersection. The present research…

Identifying Configurations of Higher Education: Reflections on Concepts That Compare Complex Cultural Settings

ERIC Educational Resources Information Center

Alheit, Peter

2013-01-01

This paper examines the idea of qualitative comparing in order to create a "heuristic concept" that will enable relational structures to be examined, drawing on the sociological tradition founded by Norbert Elias. Subsequently, an empirical research example -- the comparison of three "mentality spaces" in post-socialist…

Learning with Security

ERIC Educational Resources Information Center

Jokela, Paivi; Karlsudd, Peter

2007-01-01

The current higher education, both distance education and traditional campus courses, relies more and more on modern information and communication technologies (ICT). The use of computer systems and networks results in a wide range of security issues that must be dealt with in order to create a safe learning environment. In this work, we study the…

Smart Moves: Powering up the Brain with Physical Activity

ERIC Educational Resources Information Center

Conyers, Marcus; Wilson, Donna

2015-01-01

The Common Core State Standards emphasize higher-order thinking, problem solving, and the creation, retention, and application of knowledge. Achieving these standards creates greater cognitive demands on students. Recent research suggests that active play and regular exercise have a positive effect on brain regions associated with executive…

Educational Marketing: An Essential Tool for Managing Change.

ERIC Educational Resources Information Center

Dimun, Bonnie

This paper focuses on the changes affecting the management, leadership, and effectiveness of community colleges. In order to create a comprehensive plan that avoids complacency and demonstrates a new vision for administering higher education, institutions must develop an entrepreneurial spirit in its mission, research the marketplace, and manage…

Sustainability in Recruitment and Selection: Building a Framework of Practices

ERIC Educational Resources Information Center

Jepsen, Denise M.; Grob, Suzanne

2015-01-01

Much has been written about the role of human resources professionals in creating sustainable organizations. However, despite recognition that organizational human resources functions have an important role to play in sustainability, researchers tend to focus on strategic issues and sustainability. This higher-order focus has often meant that…

Dynamic Social Impact: The Creation of Culture by Communication.

ERIC Educational Resources Information Center

Latane, Bibb

1996-01-01

Presents a theory of how individuals located in social space influence each other to create higher order patterns of cultural structure. Presents the theory as five propositions and six derivations, arguing that Dynamic Social Impact Theory accounts for four key features of culture: regional clustering, correlations among cultural elements,…

Modular synthetic inverters from zinc finger proteins and small RNAs

DOE PAGES

Hsia, Justin; Holtz, William J.; Maharbiz, Michel M.; ...

2016-02-17

Synthetic zinc finger proteins (ZFPs) can be created to target promoter DNA sequences, repressing transcription. The binding of small RNA (sRNA) to ZFP mRNA creates an ultrasensitive response to generate higher effective Hill coefficients. Here we combined three “off the shelf” ZFPs and three sRNAs to create new modular inverters in E. coli and quantify their behavior using induction fold. We found a general ordering of the effects of the ZFPs and sRNAs on induction fold that mostly held true when combining these parts. We then attempted to construct a ring oscillator using our new inverters. In conclusion, our chosenmore » parts performed insufficiently to create oscillations, but we include future directions for improvement upon our work presented here.« less

Autonomous self-healing structural composites with bio-inspired design

PubMed Central

D’Elia, Eleonora; Eslava, Salvador; Miranda, Miriam; Georgiou, Theoni K.; Saiz, Eduardo

2016-01-01

Strong and tough natural composites such as bone, silk or nacre are often built from stiff blocks bound together using thin interfacial soft layers that can also provide sacrificial bonds for self-repair. Here we show that it is possible exploit this design in order to create self-healing structural composites by using thin supramolecular polymer interfaces between ceramic blocks. We have built model brick-and-mortar structures with ceramic contents above 95 vol% that exhibit strengths of the order of MPa (three orders of magnitude higher than the interfacial polymer) and fracture energies that are two orders of magnitude higher than those of the glass bricks. More importantly, these properties can be fully recovered after fracture without using external stimuli or delivering healing agents. This approach demonstrates a very promising route towards the design of strong, ideal self-healing materials able to self-repair repeatedly without degradation or external stimuli. PMID:27146382

Autonomous self-healing structural composites with bio-inspired design.

PubMed

D'Elia, Eleonora; Eslava, Salvador; Miranda, Miriam; Georgiou, Theoni K; Saiz, Eduardo

2016-05-05

Strong and tough natural composites such as bone, silk or nacre are often built from stiff blocks bound together using thin interfacial soft layers that can also provide sacrificial bonds for self-repair. Here we show that it is possible exploit this design in order to create self-healing structural composites by using thin supramolecular polymer interfaces between ceramic blocks. We have built model brick-and-mortar structures with ceramic contents above 95 vol% that exhibit strengths of the order of MPa (three orders of magnitude higher than the interfacial polymer) and fracture energies that are two orders of magnitude higher than those of the glass bricks. More importantly, these properties can be fully recovered after fracture without using external stimuli or delivering healing agents. This approach demonstrates a very promising route towards the design of strong, ideal self-healing materials able to self-repair repeatedly without degradation or external stimuli.

Autonomous self-healing structural composites with bio-inspired design

NASA Astrophysics Data System (ADS)

D'Elia, Eleonora; Eslava, Salvador; Miranda, Miriam; Georgiou, Theoni K.; Saiz, Eduardo

2016-05-01

Strong and tough natural composites such as bone, silk or nacre are often built from stiff blocks bound together using thin interfacial soft layers that can also provide sacrificial bonds for self-repair. Here we show that it is possible exploit this design in order to create self-healing structural composites by using thin supramolecular polymer interfaces between ceramic blocks. We have built model brick-and-mortar structures with ceramic contents above 95 vol% that exhibit strengths of the order of MPa (three orders of magnitude higher than the interfacial polymer) and fracture energies that are two orders of magnitude higher than those of the glass bricks. More importantly, these properties can be fully recovered after fracture without using external stimuli or delivering healing agents. This approach demonstrates a very promising route towards the design of strong, ideal self-healing materials able to self-repair repeatedly without degradation or external stimuli.

Measurement of distributed strain and temperature based on higher order and higher mode Bragg conditions

NASA Technical Reports Server (NTRS)

Sirkis, James S. (Inventor); Sivanesan, Ponniah (Inventor); Venkat, Venki S. (Inventor)

2001-01-01

A Bragg grating sensor for measuring distributed strain and temperature at the same time comprises an optical fiber having a single mode operating wavelength region and below a cutoff wavelength of the fiber having a multimode operating wavelength region. A saturated, higher order Bragg grating having first and second order Bragg conditions is fabricated in the optical fiber. The first order of Bragg resonance wavelength of the Bragg grating is within the single mode operating wavelength region of the optical fiber and the second order of Bragg resonance wavelength is below the cutoff wavelength of the fiber within the multimode operating wavelength region. The reflectivities of the saturated Bragg grating at the first and second order Bragg conditions are less than two orders of magnitude of one another. In use, the first and second order Bragg conditions are simultaneously created in the sensor at the respective wavelengths and a signal from the sensor is demodulated with respect to each of the wavelengths corresponding to the first and second order Bragg conditions. Two Bragg conditions have different responsivities to strain and temperature, thus allowing two equations for axial strain and temperature to be found in terms of the measure shifts in the primary and second order Bragg wavelengths. This system of equations can be solved for strain and temperature.

Useful Interactive Teaching Tool for Learning: Clickers in Higher Education

ERIC Educational Resources Information Center

Camacho-Miñano, María-del-Mar; del Campo, Cristina

2016-01-01

Many university lecturers are encouraged to implement innovative teaching tools and methodologies such as clickers in order to create an interactive learning environment and improve student learning, but its performance must be evaluated. The aim of this paper is to test empirically the impact of the use of clickers on students' learning…

Opportunities to Create Active Learning Techniques in the Classroom

ERIC Educational Resources Information Center

Camacho, Danielle J.; Legare, Jill M.

2015-01-01

The purpose of this article is to contribute to the growing body of research that focuses on active learning techniques. Active learning techniques require students to consider a given set of information, analyze, process, and prepare to restate what has been learned--all strategies are confirmed to improve higher order thinking skills. Active…

More than Skin Deep: Body Representation beyond Primary Somatosensory Cortex

ERIC Educational Resources Information Center

Longo, Matthew R.; Azanon, Elena; Haggard, Patrick

2010-01-01

The neural circuits underlying initial sensory processing of somatic information are relatively well understood. In contrast, the processes that go beyond primary somatosensation to create more abstract representations related to the body are less clear. In this review, we focus on two classes of higher-order processing beyond Somatosensation.…

Creating Alien Life Forms: Problem Solving in Biology.

ERIC Educational Resources Information Center

Grimnes, Karin A.

1996-01-01

Describes a project that helps students integrate biological concepts using both creativity and higher-order problem-solving skills. Involves students playing the roles of junior scientists aboard a starship in orbit around a class M planet and using a description of habitats, seasonal details, and a surface map of prominent geographic features to…

Building Capacity through International Student Affairs Exchange

ERIC Educational Resources Information Center

Roberts, Dennis C.; Roberts, Darbi L.

2012-01-01

In order to build local capacity in an international higher education setting, the Qatar Study Tour and Young Professionals Institute (QST and YPI) was created as an inquiry-based learning experience shared among diverse participants and designed to enhance learning at both the local and international levels. The intent of the QST and YPI model…

Improving Decision Making Skill Using an Online Volcanic Crisis Simulation: Impact of Data Presentation Format

ERIC Educational Resources Information Center

Barclay, Elizabeth J.; Renshaw, Carl E.; Taylor, Holly A.; Bilge, A. Reyan

2011-01-01

Creating effective computer-based learning exercises requires an understanding of optimal user interface designs for improving higher order cognitive skills. Using an online volcanic crisis simulation previously shown to improve decision making skill, we find that a user interface using a graphical presentation of the volcano monitoring data…

The Price Differential's Impact on Retention, Recruitment, and Quality in a Public University.

ERIC Educational Resources Information Center

Little, Michale W.; O'Toole, Dennis; Wetzel, James

1997-01-01

A survey of 467 business students at Virginia Commonwealth University investigated results of the business school's tuition differential pricing strategy, which charges a higher tuition in order to provide students with strong computer and technological instruction and support. Results indicated the additional services created added value for…

Exploring the Culture of Assessment within a Division of Student Affairs

ERIC Educational Resources Information Center

Julian, Nessa Duque

2013-01-01

The growing calls for accountability within higher education have mobilized student affairs divisions to develop practices that provide evidence of student learning and development. In order to do this effectively student affairs divisions understand the importance of creating, managing, and sustaining a culture of assessment. The purpose of this…

Bump up the Energy: Engaging Students in Online Forums

ERIC Educational Resources Information Center

Cunnin, Betty; Macpherson, Alice; Matteoni, James Alan

2011-01-01

Educators know that to engage learners in the enterprise of critical thinking, learner's need to care enough to pay attention, and feel safe enough to take intellectual risks. When interacting asynchronously in online forums, it can become even more challenging to create a space that encourages reflective, integrative, and higher order thinking.…

Problem Analysis: Challenging All Learners

ERIC Educational Resources Information Center

Garcia, Katie; Davis, Alicia

2013-01-01

In this article, Garcia and Davis describe problem analysis as the process of examining a given mathematics exercise to find ways in which the problem can be modified and extended to create a richer learning opportunity for students. Students are often reluctant to attempt what they perceive to be higher-order thinking problems, but problem…

Q-plates as higher order polarization controllers for orbital angular momentum modes of fiber.

PubMed

Gregg, P; Mirhosseini, M; Rubano, A; Marrucci, L; Karimi, E; Boyd, R W; Ramachandran, S

2015-04-15

We demonstrate that a |q|=1/2 plate, in conjunction with appropriate polarization optics, can selectively and switchably excite all linear combinations of the first radial mode order |l|=1 orbital angular momentum (OAM) fiber modes. This enables full mapping of free-space polarization states onto fiber vector modes, including the radially (TM) and azimuthally polarized (TE) modes. The setup requires few optical components and can yield mode purities as high as ∼30  dB. Additionally, just as a conventional fiber polarization controller creates arbitrary elliptical polarization states to counteract fiber birefringence and yield desired polarizations at the output of a single-mode fiber, q-plates disentangle degenerate state mixing effects between fiber OAM states to yield pure states, even after long-length fiber propagation. We thus demonstrate the ability to switch dynamically, potentially at ∼GHz rates, between OAM modes, or create desired linear combinations of them. We envision applications in fiber-based lasers employing vector or OAM mode outputs, as well as communications networking schemes exploiting spatial modes for higher dimensional encoding.

An in vivo and in silico approach to study cis-antisense: a short cut to higher order response

NASA Astrophysics Data System (ADS)

Courtney, Colleen; Varanasi, Usha; Chatterjee, Anushree

2014-03-01

Antisense interactions are present in all domains of life. Typically sense, antisense RNA pairs originate from overlapping genes with convergent face to face promoters, and are speculated to be involved in gene regulation. Recent studies indicate the role of transcriptional interference (TI) in regulating expression of genes in convergent orientation. Modeling antisense, TI gene regulation mechanisms allows us to understand how organisms control gene expression. We present a modeling and experimental framework to understand convergent transcription that combines the effects of transcriptional interference and cis-antisense regulation. Our model shows that combining transcriptional interference and antisense RNA interaction adds multiple-levels of regulation which affords a highly tunable biological output, ranging from first order response to complex higher-order response. To study this system we created a library of experimental constructs with engineered TI and antisense interaction by using face-to-face inducible promoters separated by carefully tailored overlapping DNA sequences to control expression of a set of fluorescent reporter proteins. Studying this gene expression mechanism allows for an understanding of higher order behavior of gene expression networks.

Diffusion of non-Gaussianity in heavy ion collisions

NASA Astrophysics Data System (ADS)

Kitazawa, Masakiyo; Asakawa, Masayuki; Ono, Hirosato

2014-05-01

We investigate the time evolution of higher order cumulants of bulk fluctuations of conserved charges in the hadronic stage in relativistic heavy ion collisions. The dynamical evolution of non-Gaussian fluctuations is modeled by the diffusion master equation. Using this model we predict that the fourth-order cumulant of net-electric charge is suppressed compared with the recently observed second-order one at ALICE for a reasonable parameter range. Significance of the measurements of various cumulants as functions of rapidity window to probe dynamical history of the hot medium created by heavy ion collisions is emphasized.

Convergence of the Light-Front Coupled-Cluster Method in Scalar Yukawa Theory

NASA Astrophysics Data System (ADS)

Usselman, Austin

We use Fock-state expansions and the Light-Front Coupled-Cluster (LFCC) method to study mass eigenvalue problems in quantum field theory. Specifically, we study convergence of the method in scalar Yukawa theory. In this theory, a single charged particle is surrounded by a cloud of neutral particles. The charged particle can create or annihilate neutral particles, causing the n-particle state to depend on the n + 1 and n - 1-particle state. Fock state expansion leads to an infinite set of coupled equations where truncation is required. The wave functions for the particle states are expanded in a basis of symmetric polynomials and a generalized eigenvalue problem is solved for the mass eigenvalue. The mass eigenvalue problem is solved for multiple values for the coupling strength while the number of particle states and polynomial basis order are increased. Convergence of the mass eigenvalue solutions is then obtained. Three mass ratios between the charged particle and neutral particles were studied. This includes a massive charged particle, equal masses and massive neutral particles. Relative probability between states can also be explored for more detailed understanding of the process of convergence with respect to the number of Fock sectors. The reliance on higher order particle states depended on how large the mass of the charge particle was. The higher the mass of the charged particle, the more the system depended on higher order particle states. The LFCC method solves this same mass eigenvalue problem using an exponential operator. This exponential operator can then be truncated instead to form a finite system of equations that can be solved using a built in system solver provided in most computational environments, such as MatLab and Mathematica. First approximation in the LFCC method allows for only one particle to be created by the new operator and proved to be not powerful enough to match the Fock state expansion. The second order approximation allowed one and two particles to be created by the new operator and converged to the Fock state expansion results. This showed the LFCC method to be a reliable replacement method for solving quantum field theory problems.

Compact circularly polarized truncated square ring slot antenna with suppressed higher resonances

PubMed Central

Sabran, Mursyidul Idzam; Leow, Chee Yen; Soh, Ping Jack; Chew, Beng Wah; Vandenbosch, Guy A. E.

2017-01-01

This paper presents a compact circularly polarized (CP) antenna with an integrated higher order harmonic rejection filter. The proposed design operates within the ISM band of 2.32 GHz– 2.63 GHz and is suitable for example for wireless power transfer applications. Asymmetrical truncated edges on a square ring create a defected ground structure to excite the CP property, simultaneously realizing compactness. It offers a 50.5% reduced patch area compared to a conventional design. Novel stubs and slot shapes are integrated in the transmission line to reduce higher (up to the third) order harmonics. The proposed prototype yields a -10 dB reflection coefficient (S11) impedance bandwidth of 12.53%, a 3 dB axial ratio bandwidth of 3.27%, and a gain of 5.64 dBi. Measurements also show good agreement with simulations. PMID:28192504

Compact circularly polarized truncated square ring slot antenna with suppressed higher resonances.

PubMed

Sabran, Mursyidul Idzam; Abdul Rahim, Sharul Kamal; Leow, Chee Yen; Soh, Ping Jack; Chew, Beng Wah; Vandenbosch, Guy A E

2017-01-01

This paper presents a compact circularly polarized (CP) antenna with an integrated higher order harmonic rejection filter. The proposed design operates within the ISM band of 2.32 GHz- 2.63 GHz and is suitable for example for wireless power transfer applications. Asymmetrical truncated edges on a square ring create a defected ground structure to excite the CP property, simultaneously realizing compactness. It offers a 50.5% reduced patch area compared to a conventional design. Novel stubs and slot shapes are integrated in the transmission line to reduce higher (up to the third) order harmonics. The proposed prototype yields a -10 dB reflection coefficient (S11) impedance bandwidth of 12.53%, a 3 dB axial ratio bandwidth of 3.27%, and a gain of 5.64 dBi. Measurements also show good agreement with simulations.

A Report Card for Risk Management in Higher Education for Two-Year Colleges in Minnesota, Wisconsin, and Michigan: A Study to Assess Gaps Regarding Risk Management in Higher Education

ERIC Educational Resources Information Center

Centko, John David

2017-01-01

The purpose of this study was to organize the identified risks into one of the five classifications in order to establish a taxonomy created by peers and to measure the variances in the level of risk at two-year colleges. A universal problem for colleges and universities is the difficulty of finding peer groups that have and are willing to share…

Higher Order Thinking in Collaborative Video Annotations: Investigating Discourse Modeling and the Staggering of Learner Participation

ERIC Educational Resources Information Center

Howard, Craig Dennis

2012-01-01

"Collaborative video annotation" (CVA) allows multiple users to annotate video and create a discussion asynchronously. This dissertation investigates 14 small-group CVA discussions held on YouTube in a pre-service teacher education course. Fourteen groups of 6-12 pre-service teachers (141 total) participated. Five of these groups (48…

A Study of Education Today: Interactive Classroom Educational Technology Strategies (ICETS)

ERIC Educational Resources Information Center

Diaz, Jorge Luis

2012-01-01

This research study was conducted in order to use the created program Interactive Classroom Educational Technology (ICETS) with students attending an inner-city high school for developing testing skills to enable higher scores on the test formally known as the American College Test (ACT), now simply named the ACT, English subtest. The proposed…

Fantasy Seed Company: A Role Playing Game for Plant Breeding Courses

ERIC Educational Resources Information Center

Hague, Steve S.

2011-01-01

Understanding plant breeding as well as procedures and issues of seed companies are skills students studying agronomy need to acquire. Simulation games can be effective teaching tools in developing higher-order thinking skills of students. The "Fantasy Seed Company" game was developed to create motivated learners by allowing students to run a mock…

Managing Diversity: A Key to Building a Quality Work Force. Research and Development Series No. 271.

ERIC Educational Resources Information Center

Maxson, Judith; Hair, Billy

Economic changes create stress as U.S. businesses progress toward building a high quality work force for the year 2000. Skills such as critical literacy, communication, writing, math, and interpersonal competence are desired. Critical literacy involves the higher order thinking skills: the ability to analyze, evaluate, and synthesize. In addition,…

Architectural Design Education Program for Children: Adaptation into Turkish Culture and Analysis of Its Effectiveness

ERIC Educational Resources Information Center

Gözen, Göksu

2015-01-01

Problem Statement: Design, which is a process of creating, supports individuals' pursuit, experience and discovery, and contributes to the improvement of higher-order thinking skills. A systematic design education offered in the early years of life boosts especially creative thinking and problem solving skills as well as awareness of the…

Non-Performativity of University and Subjectification of Students: The Question of Equality and Diversity in UK Universities

ERIC Educational Resources Information Center

Kimura, Maki

2014-01-01

Universities in the United Kingdom have experienced a transformation in the context of the government's initiatives to widen participation and rapid socio-economic changes locally and globally. With more diverse students entering higher education, universities need to consider how they can create an inclusive environment. Indeed, in order to…

When Socialism Meets Market Capitalism: Challenges for Privatizing and Marketizing Education in China and Vietnam

ERIC Educational Resources Information Center

Mok, Ka Ho

2008-01-01

China and Vietnam have experienced drastic social, economic and political changes, especially when these two socialist regimes have started economic reforms in the last few decades. In order to create more opportunities for higher education with limited national resources, both Chinese and Vietnamese governments have adopted strategies along the…

Remote Sensing: Analyzing Satellite Images to Create Higher Order Thinking Skills.

ERIC Educational Resources Information Center

Marks, Steven K.; And Others

1996-01-01

Presents a unit that uses remote-sensing images from satellites and other spacecraft to provide new perspectives of the earth and generate greater global awareness. Relates the levels of Bloom's hierarchy to different aspects of the remote sensing unit to confirm that the concepts and principles of remote sensing and related images belong in…

When a Dog Has a Pen for a Tail: The Time Course of Creative Object Processing

ERIC Educational Resources Information Center

Wang, Botao; Duan, Haijun; Qi, Senqing; Hu, Weiping; Zhang, Huan

2017-01-01

Creative objects differ from ordinary objects in that they are created by human beings to contain novel, creative information. Previous research has demonstrated that ordinary object processing involves both a perceptual process for analyzing different features of the visual input and a higher-order process for evaluating the relevance of this…

The Outlook in Business and Related Fields

ERIC Educational Resources Information Center

Walker, Robert

2009-01-01

As oil prices fluctuate widely and a worldwide recession grows, people are seeing a fundamental shift in the U.S. economy and in consumer buying behavior. This shift is forcing every organization to maximize its efficiency in order to remain profitable and is thereby creating a higher demand for new staff who have management and project management…

A Case Study of Assessing an International Initiative on Curriculum Reform

ERIC Educational Resources Information Center

Reichman, Roxana G.

2014-01-01

The globalized world we live in has forced institutions of higher education and of teacher education to deal with different aspects of diversity. More and more institution have become involved in creating programs geared at promoting multiculturalism on campus, as well as in changing the curriculum in order to make it more relevant to students who…

Electric discharge effects on a XeCl pumped S2 heat-pipe laser

NASA Technical Reports Server (NTRS)

Killeen, K.; Greenberg, K.; Verdeyen, J. T.

1982-01-01

It is shown that an electrical discharge can dissociate the higher-order sulfur molecules S(3-8) into dimers S2 and thus create the proper environment for efficient conversion of XeCl radiation at 308 nm to the blue-green. The use of a heat-pipe configuration greatly alleviates the technological problems.

Solitonic Spin-Liquid State Due to the Violation of the Lifshitz Condition in Fe(1+y)Te.

PubMed

Materne, Ph; Koz, C; Rössler, U K; Doerr, M; Goltz, T; Klauss, H H; Schwarz, U; Wirth, S; Rössler, S

2015-10-23

A combination of phenomenological analysis and Mössbauer spectroscopy experiments on the tetragonal Fe(1+y)Te system indicates that the magnetic ordering transition in compounds with higher Fe excess, y≥0.11, is unconventional. Experimentally, a liquidlike magnetic precursor with quasistatic spin order is found from significantly broadened Mössbauer spectra at temperatures above the antiferromagnetic transition. The incommensurate spin-density wave order in Fe(1+y)Te is described by a magnetic free energy that violates the weak Lifshitz condition in the Landau theory of second-order transitions. The presence of multiple Lifshitz invariants provides the mechanism to create multidimensional, twisted, and modulated solitonic phases.

Solitonic Spin-Liquid State Due to the Violation of the Lifshitz Condition in Fe1 +yTe

NASA Astrophysics Data System (ADS)

Materne, Ph.; Koz, C.; Rößler, U. K.; Doerr, M.; Goltz, T.; Klauss, H. H.; Schwarz, U.; Wirth, S.; Rößler, S.

2015-10-01

A combination of phenomenological analysis and Mössbauer spectroscopy experiments on the tetragonal Fe1 +yTe system indicates that the magnetic ordering transition in compounds with higher Fe excess, y ≥0.11 , is unconventional. Experimentally, a liquidlike magnetic precursor with quasistatic spin order is found from significantly broadened Mössbauer spectra at temperatures above the antiferromagnetic transition. The incommensurate spin-density wave order in Fe1 +yTe is described by a magnetic free energy that violates the weak Lifshitz condition in the Landau theory of second-order transitions. The presence of multiple Lifshitz invariants provides the mechanism to create multidimensional, twisted, and modulated solitonic phases.

Developing Instructional Design to Improve Mathematical Higher Order Thinking Skills of Students

NASA Astrophysics Data System (ADS)

Apino, E.; Retnawati, H.

2017-02-01

This study aimed to describe the instructional design to improve the Higher Order Thinking Skills (HOTS) of students in learning mathematics. This research is design research involving teachers and students of class X MIPA 1 MAN Yigyakarta III, Special Region of Yogyakarta, Indonesia. Data collected through focus group discussions and tests. Data analyzed by quantitative descriptive. The results showed that the instructional design developed is effective to improving students’ HOTS in learning mathematics. Instructional design developed generally include three main components: (1) involve students in the activities non-routine problem solving; (2) facilitating students to develop the ability to analyze and evaluate (critical thinking) and the ability to create (creative thinking); and (3) encourage students to construct their own knowledge.

Generation of higher-order rogue waves from multibreathers by double degeneracy in an optical fiber.

PubMed

Wang, Lihong; He, Jingsong; Xu, Hui; Wang, Ji; Porsezian, Kuppuswamy

2017-04-01

In this paper, we construct a special kind of breather solution of the nonlinear Schrödinger (NLS) equation, the so-called breather-positon (b-positon for short), which can be obtained by taking the limit λ_{j}→λ_{1} of the Lax pair eigenvalues in the order-n periodic solution, which is generated by the n-fold Darboux transformation from a special "seed" solution-plane wave. Further, an order-n b-positon gives an order-n rogue wave under a limit λ_{1}→λ_{0}. Here, λ_{0} is a special eigenvalue in a breather of the NLS equation such that its period goes to infinity. Several analytical plots of order-2 breather confirm visually this double degeneration. The last limit in this double degeneration can be realized approximately in an optical fiber governed by the NLS equation, in which an injected initial ideal pulse is created by a frequency comb system and a programable optical filter (wave shaper) according to the profile of an analytical form of the b-positon at a certain position z_{0}. We also suggest a new way to observe higher-order rogue waves generation in an optical fiber, namely, measure the patterns at the central region of the higher-order b-positon generated by above ideal initial pulses when λ_{1} is very close to the λ_{0}. The excellent agreement between the numerical solutions generated from initial ideal inputs with a low signal-to-noise ratio and analytical solutions of order-2 b-positon supports strongly this way in a realistic optical fiber system. Our results also show the validity of the generating mechanism of a higher-order rogue waves from a multibreathers through the double degeneration.

Enhancing the Critical Role of Malaysian Institute of Higher Education from Ivy League American Universities Research Culture Experiences

ERIC Educational Resources Information Center

Jusoff, Hj. Kamaruzaman; Samah, Hjh. Siti Akmar Abu; Abdullah, Zaini

2009-01-01

Emulation by example is an old adage that has been a pragmatic initiative in great endeavors. To create a dynamic research culture too requires revisiting eminent personality and renowned organization by which one can copy in order to establish credibility. This paper explores the practicality of the emulation activities that help to establish…

The CLEP Program: An Evaluation and Assessment at a Small Private University

ERIC Educational Resources Information Center

Beaver, William; Paul, Stephen T.

2007-01-01

The Educational Testing Service (ETS) created the College Level Examination Program (CLEP) in 1965 and over the years it has become a staple of American higher education. In order to better understand the ramifications of the CLEP program, this article provides a brief history of CLEP and reexamines some of the findings of earlier research. The…

Creating Thoughtful Salespeople: Experiential Learning to Improve Critical Thinking Skills in Traditional and Online Sales Education

ERIC Educational Resources Information Center

Alvarez, Cecilia M. O.; Taylor, Kimberly A.; Rauseo, Nancy A.

2015-01-01

Most undergraduate marketing majors will spend at least some time in a sales role, and employers are requiring greater professionalism and more varied skill sets from their sales hires. In addition, there is an increasing demand for online and higher order learning in sales education. In response, this article proposes that sales courses using…

From Industry to Higher Education and Libraries: Building the Fast Response Library (FRL).

ERIC Educational Resources Information Center

Apostolou, A. S.; Skiadas, C. H.

In order to be effective in the coming millennium, libraries will need to measure their performance rigorously against the expectations and real needs of their customers. The library of the future will need to be a customer sensitive, knowledge creating, agile enterprise. It must provide value to every customer, where value is the customer's…

Plastic Surgery Overseas: How Much Should a Physician Risk in the Pursuit of Higher-Quality Continuity of Care?

PubMed

Schweikart, Scott

2018-04-01

In this article I discuss medical tourism, whereby patients go overseas for plastic surgery treatment in order to save money. However, if malpractice occurs abroad, there are several barriers that make it difficult for patients to recover damages. I explain these legal barriers and then discuss the possible causes of action patients can have over their "domestic physician" (their personal physician who might have referred surgery abroad or who gives postoperative follow-up care) and how these causes of action can create avenues of legal recovery not otherwise available. The possible liability of the domestic physician in the context of surgical malpractice abroad creates an ethical tension in the pursuit of higher-quality continuity of care, as the more involved the physician becomes in the process, the more likely he or she will assume liability. © 2018 American Medical Association. All Rights Reserved.

Volcanology: Self-Directed Study Units for Grades K-3 and 4-8, Gifted. Easily Adapted for Regular Classroom Use. Zephyr Learning Project.

ERIC Educational Resources Information Center

Rassmusen, Bonnie

Originally designed for gifted students, these reproducible volcanology units emphasize the use of higher order thinking skills and are appropriate for use in any classroom. Interdisciplinary in content, the units provide a broad view of volcanology. Included are two complete units, one created for the upper elementary gifted student and the other…

Wavefront shaping with an electrowetting liquid lens using surface harmonics (Conference Presentation)

NASA Astrophysics Data System (ADS)

Strauch, Matthias; Konijnenberg, Sander; Shao, Yifeng; Urbach, H. Paul

2017-02-01

Liquid lenses are used to correct for low order wavefront aberrations. Electrowetting liquid lenses can nowadays control defocus and astigmatism effectively, so they start being used for ophthalmology applications. To increase the performance and applicability, we introduce a new driving mechanism to create, detect and correct higher order aberrations using standing waves on the liquid interface. The speed of a liquid lens is in general limited, because the liquid surface cannot follow fast voltage changes, while providing a spherical surface. Surface waves are created instead and with them undesired aberrations. We try to control those surface waves to turn them into an effective wavefront shaping tool. We introduce a model, which treats the liquid lens as a circular vibrating membrane with adjusted boundary conditions. Similar to tunable acoustic gradient (TAG) lenses, the nature of the surface modes are predicted to be Bessel functions. Since Bessel functions are a full set of orthogonal basis functions any surface can be created as a linear combination of different Bessel functions. The model was investigated experimentally in two setups. First the point spread functions were studied and compared to a simulation of the intensity distribution created by Fresnel propagated Bessel surfaces. Second the wavefronts were measured directly using a spatial light modulator. The surface resonance frequencies confirm the predictions made by the model as well as the wavefront measurements. By superposition of known surface modes, it is possible to create new surface shapes, which can be used to simulate and measure the human eye.

Optimizing Efficiency of Psychopathology Assessment through Quantitative Modeling: Development of a Brief Form of the Externalizing Spectrum Inventory

PubMed Central

Patrick, Christopher J.; Kramer, Mark D.; Krueger, Robert F.; Markon, Kristian E.

2014-01-01

The Externalizing Spectrum Inventory (ESI; Krueger, Markon, Patrick, Benning, & Kramer, 2007) provides for integrated, hierarchical assessment of a broad range of problem behaviors and traits in the domain of deficient impulse control. The ESI assesses traits and problems in this domain through 23 lower-order facet scales organized around three higher-order dimensions, reflecting general disinhibition, callous-aggression, and substance abuse. The full-form ESI contains 415 items, and a shorter form would be useful for questionnaire screening studies or multi-domain research protocols. The current work employed item response theory and structural modeling methods to create a 160-item brief form (ESI-bf) that provides for efficient measurement of the ESI’s lower-order facets and quantification of its higher-order dimensions either as scale-based factors or as item-based composites. The ESI-bf is recommended for use in research on psychological or neurobiological correlates of problems such as risk-taking, delinquency, aggression, and substance abuse, and studies of general and specific mechanisms that give rise to problems of these kinds. PMID:24320765

Extended AIC model based on high order moments and its application in the financial market

NASA Astrophysics Data System (ADS)

Mao, Xuegeng; Shang, Pengjian

2018-07-01

In this paper, an extended method of traditional Akaike Information Criteria(AIC) is proposed to detect the volatility of time series by combining it with higher order moments, such as skewness and kurtosis. Since measures considering higher order moments are powerful in many aspects, the properties of asymmetry and flatness can be observed. Furthermore, in order to reduce the effect of noise and other incoherent features, we combine the extended AIC algorithm with multiscale wavelet analysis, in which the newly extended AIC algorithm is applied to wavelet coefficients at several scales and the time series are reconstructed by wavelet transform. After that, we create AIC planes to derive the relationship among AIC values using variance, skewness and kurtosis respectively. When we test this technique on the financial market, the aim is to analyze the trend and volatility of the closing price of stock indices and classify them. And we also adapt multiscale analysis to measure complexity of time series over a range of scales. Empirical results show that the singularity of time series in stock market can be detected via extended AIC algorithm.

Comparison of a model vapor deposited glass films to equilibrium glass films

NASA Astrophysics Data System (ADS)

Flenner, Elijah; Berthier, Ludovic; Charbonneau, Patrick; Zamponi, Francesco

Vapor deposition of particles onto a substrate held at around 85% of the glass transition temperature can create glasses with increased density, enthalpy, kinetic stability, and mechanical stability compared to an ordinary glass created by cooling. It is estimated that an ordinary glass would need to age thousands of years to reach the kinetic stability of a vapor deposited glass, and a natural question is how close to the equilibrium is the vapor deposited glass. To understand the process, algorithms akin to vapor deposition are used to create simulated glasses that have a higher kinetic stability than their annealed counterpart, although these glasses may not be well equilibrated either. Here we use novel models optimized for a swap Monte Carlo algorithm in order to create equilibrium glass films and compare their properties with those of glasses obtained from vapor deposition algorithms. This approach allows us to directly assess the non-equilibrium nature of vapor-deposited ultrastable glasses. Simons Collaboration on Cracking the Glass Problem and NSF Grant No. DMR 1608086.

Imaging atomic-scale effects of high-energy ion irradiation on superconductivity and vortex pinning in Fe(Se,Te)

PubMed Central

Massee, Freek; Sprau, Peter Oliver; Wang, Yong-Lei; Davis, J. C. Séamus; Ghigo, Gianluca; Gu, Genda D.; Kwok, Wai-Kwong

2015-01-01

Maximizing the sustainable supercurrent density, JC, is crucial to high-current applications of superconductivity. To achieve this, preventing dissipative motion of quantized vortices is key. Irradiation of superconductors with high-energy heavy ions can be used to create nanoscale defects that act as deep pinning potentials for vortices. This approach holds unique promise for high-current applications of iron-based superconductors because JC amplification persists to much higher radiation doses than in cuprate superconductors without significantly altering the superconducting critical temperature. However, for these compounds, virtually nothing is known about the atomic-scale interplay of the crystal damage from the high-energy ions, the superconducting order parameter, and the vortex pinning processes. We visualize the atomic-scale effects of irradiating FeSexTe1−x with 249-MeV Au ions and find two distinct effects: compact nanometer-sized regions of crystal disruption or “columnar defects,” plus a higher density of single atomic site “point” defects probably from secondary scattering. We directly show that the superconducting order is virtually annihilated within the former and suppressed by the latter. Simultaneous atomically resolved images of the columnar crystal defects, the superconductivity, and the vortex configurations then reveal how a mixed pinning landscape is created, with the strongest vortex pinning occurring at metallic core columnar defects and secondary pinning at clusters of point-like defects, followed by collective pinning at higher fields. PMID:26601180

Imaging atomic-scale effects of high-energy ion irradiation on superconductivity and vortex pinning in Fe(Se,Te).

PubMed

Massee, Freek; Sprau, Peter Oliver; Wang, Yong-Lei; Davis, J C Séamus; Ghigo, Gianluca; Gu, Genda D; Kwok, Wai-Kwong

2015-05-01

Maximizing the sustainable supercurrent density, J C, is crucial to high-current applications of superconductivity. To achieve this, preventing dissipative motion of quantized vortices is key. Irradiation of superconductors with high-energy heavy ions can be used to create nanoscale defects that act as deep pinning potentials for vortices. This approach holds unique promise for high-current applications of iron-based superconductors because J C amplification persists to much higher radiation doses than in cuprate superconductors without significantly altering the superconducting critical temperature. However, for these compounds, virtually nothing is known about the atomic-scale interplay of the crystal damage from the high-energy ions, the superconducting order parameter, and the vortex pinning processes. We visualize the atomic-scale effects of irradiating FeSe x Te1-x with 249-MeV Au ions and find two distinct effects: compact nanometer-sized regions of crystal disruption or "columnar defects," plus a higher density of single atomic site "point" defects probably from secondary scattering. We directly show that the superconducting order is virtually annihilated within the former and suppressed by the latter. Simultaneous atomically resolved images of the columnar crystal defects, the superconductivity, and the vortex configurations then reveal how a mixed pinning landscape is created, with the strongest vortex pinning occurring at metallic core columnar defects and secondary pinning at clusters of point-like defects, followed by collective pinning at higher fields.

The Use of Absorptive Capacity in Improving the New Product Development (NPD

NASA Astrophysics Data System (ADS)

Gunawan, W.; Gerardus, P.; Tji, B. J.; Richard, K.

2017-01-01

The term Absorptive Capacity (AC) refers to maximizing the external knowledge transfer into the organization in order to improve its performance. Since its introduction in year 1990, AC has been applied widely in many fields such as: economy, business, KM, HR, intellectual capital, IT, operation management, marketing, etc. Due to its wide application, nevertheless, The AC application in both Indonesian industry and higher education institutions (HEIs) are still rare to find. The Indonesian Directorate General of Higher Education (DGHE) has encouraged creating effective collaboration model that enables to link the HEIs with the industries in order to improve knowledge creation in improving product development that can be used by the firms. For this reason, the article examines the effective AC model that enables to assist in improving new product development (NPD) process in the polytechnic perspectives.

Marine Biology: Self-Directed Study Units for Grades K-3 and 4-8, Gifted. Easily Adapted for Regular Classroom Use. Zephyr Learning Project.

ERIC Educational Resources Information Center

Tanner, Joey

Originally designed for the gifted student, these reproducible marine biology units emphasize the use of higher order thinking skills and are appropriate for use in any classroom. Interdisciplinary in content, the units provide a broad view of marine biology. Included are two complete units, one created for the upper elementary gifted student and…

From perception to art: how vision creates meanings.

PubMed

Pinna, Baingio; Reeves, Adam

2009-01-01

This article describes the relationship between Art, as painting or sculpture, and a new theory of perceptual meaning, which builds on and now further develops the Gestalt principles. A key new idea in the theory is that higher-order groupings principles exist which, like the spatial grouping articulated by the principle of Prägnanz, helps to associate and combine stimuli, but which, unlike the Gestalt laws, can explain combinations of dissimilar as well as similar forms of visual information in a lawful manner. Similarities and dissimilarities are put together again by virtue of another and more global grouping factor that overcomes the dissimilarities of the components: it is some kind of meaning principle that perceptually solves the differences among whole and elements at a higher level, making them appear strongly linked just by virtue of the differences. In this way, similarities and dissimilarities complement and do not exclude each other. Such higher-order principles of grouping-by-meaning are articulated and illustrated using Art, from prehistoric to modern.

3D printed facial laser scans for the production of localised radiotherapy treatment masks - A case study.

PubMed

Briggs, Matthew; Clements, Helen; Wynne, Neil; Rennie, Allan; Kellett, Darren

This study investigates the use of 3D printing for patients that require localised radiotherapy treatment to the face. The current process involves producing a lead mask in order to protect the healthy tissue from the effects of the radiotherapy. The mask is produced by applying a thermoplastic sheet to the patient's face and allowing to set hard. This can then be used as a mould to create a plaster impression of the patient's face. A sheet of lead is then hammered on to the plaster to create a bespoke fitted face mask. This process can be distressing for patients and can be problematic when the patient is required to remain motionless for a prolonged time while the thermoplastic sets. In this study, a 1:1 scale 3D print of a patient's face was generated using a laser scanner. The lead was hammered directly on to the surface of the 3D print in order to create a bespoke fitted treatment mask. This eliminated the thermoplastic moulding stage and significantly reduced the time needed for the patient to be in clinic. The higher definition impression of the the face resulted in a more accurate, better fitting treatment mask.

An implicit higher-order spatially accurate scheme for solving time dependent flows on unstructured meshes

NASA Astrophysics Data System (ADS)

Tomaro, Robert F.

1998-07-01

The present research is aimed at developing a higher-order, spatially accurate scheme for both steady and unsteady flow simulations using unstructured meshes. The resulting scheme must work on a variety of general problems to ensure the creation of a flexible, reliable and accurate aerodynamic analysis tool. To calculate the flow around complex configurations, unstructured grids and the associated flow solvers have been developed. Efficient simulations require the minimum use of computer memory and computational times. Unstructured flow solvers typically require more computer memory than a structured flow solver due to the indirect addressing of the cells. The approach taken in the present research was to modify an existing three-dimensional unstructured flow solver to first decrease the computational time required for a solution and then to increase the spatial accuracy. The terms required to simulate flow involving non-stationary grids were also implemented. First, an implicit solution algorithm was implemented to replace the existing explicit procedure. Several test cases, including internal and external, inviscid and viscous, two-dimensional, three-dimensional and axi-symmetric problems, were simulated for comparison between the explicit and implicit solution procedures. The increased efficiency and robustness of modified code due to the implicit algorithm was demonstrated. Two unsteady test cases, a plunging airfoil and a wing undergoing bending and torsion, were simulated using the implicit algorithm modified to include the terms required for a moving and/or deforming grid. Secondly, a higher than second-order spatially accurate scheme was developed and implemented into the baseline code. Third- and fourth-order spatially accurate schemes were implemented and tested. The original dissipation was modified to include higher-order terms and modified near shock waves to limit pre- and post-shock oscillations. The unsteady cases were repeated using the higher-order spatially accurate code. The new solutions were compared with those obtained using the second-order spatially accurate scheme. Finally, the increased efficiency of using an implicit solution algorithm in a production Computational Fluid Dynamics flow solver was demonstrated for steady and unsteady flows. A third- and fourth-order spatially accurate scheme has been implemented creating a basis for a state-of-the-art aerodynamic analysis tool.

External benefits of biomass-e in Spain: an economic valuation.

PubMed

Soliño, Mario

2010-03-01

This article analyses the willingness to pay for a program that promotes the production of electricity from forest biomass, instead of that based on fossil fuels. The program decreases greenhouse gas emissions, reduces the pressure on non-renewable resources, lowers the risk of summer forest fires, creates employment in rural areas. Results from a choice experiment show that consumers are willing to pay a higher price for electricity in order to obtain the external benefits of the substitution. Respondents attach a higher value to programs that decrease the pressure of non-renewable resources and the risk of forest fires. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Counterbalancing for serial order carryover effects in experimental condition orders.

PubMed

Brooks, Joseph L

2012-12-01

Reactions of neural, psychological, and social systems are rarely, if ever, independent of previous inputs and states. The potential for serial order carryover effects from one condition to the next in a sequence of experimental trials makes counterbalancing of condition order an essential part of experimental design. Here, a method is proposed for generating counterbalanced sequences for repeated-measures designs including those with multiple observations of each condition on one participant and self-adjacencies of conditions. Condition ordering is reframed as a graph theory problem. Experimental conditions are represented as vertices in a graph and directed edges between them represent temporal relationships between conditions. A counterbalanced trial order results from traversing an Euler circuit through such a graph in which each edge is traversed exactly once. This method can be generalized to counterbalance for higher order serial order carryover effects as well as to create intentional serial order biases. Modern graph theory provides tools for finding other types of paths through such graph representations, providing a tool for generating experimental condition sequences with useful properties. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Effects of creatine supplementation on biomarkers of hepatic and renal function in young trained rats.

PubMed

Souza, William Marciel; Heck, Thiago Gomes; Wronski, Evanio Castor; Ulbrich, Anderson Zampier; Boff, Everton

2013-11-01

Creatine supplementation has been widely used by athletes and young physical exercise practioneers in order of increasing muscle mass and enhancing athletic performance, but their use/overuse may represent a health risk on hepatic and renal impaired function. In this study, we evaluated the effects of 40 days of oral creatine supplementation on hepatic and renal function biomarkers in a young animal model. Wistar rats (5 weeks old) were divided in five groups (n = 7): control (CONTR), oral creatine supplementation (CREAT), moderate exercise training (EXERC), moderate exercise training plus oral creatine supplementation (EXERC + CREAT) and pathological group (positive control for liver and kidney injury) by the administration of rifampicin (RIFAMPICIN). Exercise groups were submitted to 60 min/day of swimming exercise session with a 4% of body weight workload for six weeks. The EXERC + CREAT showed the higher body weight at the end of the training protocol. The CREAT and EXERC + CREAT group showed an increase in hepatic (Aspartate transaminase and gamma-glutamyl transpeptidase) and renal (urea and creatinine) biomarkers levels (p < 0.05). Our study showed that the oral creatine supplementation promoted hepatic and renal function challenge in young rats submitted to moderate exercise training.

Dynamics Behaviors of Scale-Free Networks with Elastic Demand

NASA Astrophysics Data System (ADS)

Li, Yan-Lai; Sun, Hui-Jun; Wu, Jian-Jun

Many real-world networks, such as transportation networks and Internet, have the scale-free properties. It is important to study the bearing capacity of such networks. Considering the elastic demand condition, we analyze load distributions and bearing capacities with different parameters through artificially created scale-free networks. The simulation results show that the load distribution follows a power-law form, which means some ordered pairs, playing the dominant role in the transportation network, have higher demand than other pairs. We found that, with the decrease of perceptual error, the total and average ordered pair demand will decrease and then stay in a steady state. However, with the increase of the network size, the average demand of each ordered pair will decrease, which is particularly interesting for the network design problem.

Is Statistical Learning Constrained by Lower Level Perceptual Organization?

PubMed Central

Emberson, Lauren L.; Liu, Ran; Zevin, Jason D.

2013-01-01

In order for statistical information to aid in complex developmental processes such as language acquisition, learning from higher-order statistics (e.g. across successive syllables in a speech stream to support segmentation) must be possible while perceptual abilities (e.g. speech categorization) are still developing. The current study examines how perceptual organization interacts with statistical learning. Adult participants were presented with multiple exemplars from novel, complex sound categories designed to reflect some of the spectral complexity and variability of speech. These categories were organized into sequential pairs and presented such that higher-order statistics, defined based on sound categories, could support stream segmentation. Perceptual similarity judgments and multi-dimensional scaling revealed that participants only perceived three perceptual clusters of sounds and thus did not distinguish the four experimenter-defined categories, creating a tension between lower level perceptual organization and higher-order statistical information. We examined whether the resulting pattern of learning is more consistent with statistical learning being “bottom-up,” constrained by the lower levels of organization, or “top-down,” such that higher-order statistical information of the stimulus stream takes priority over the perceptual organization, and perhaps influences perceptual organization. We consistently find evidence that learning is constrained by perceptual organization. Moreover, participants generalize their learning to novel sounds that occupy a similar perceptual space, suggesting that statistical learning occurs based on regions of or clusters in perceptual space. Overall, these results reveal a constraint on learning of sound sequences, such that statistical information is determined based on lower level organization. These findings have important implications for the role of statistical learning in language acquisition. PMID:23618755

Biology in Bloom: Implementing Bloom's Taxonomy to Enhance Student Learning in Biology

PubMed Central

Dirks, Clarissa; Wenderoth, Mary Pat

2008-01-01

We developed the Blooming Biology Tool (BBT), an assessment tool based on Bloom's Taxonomy, to assist science faculty in better aligning their assessments with their teaching activities and to help students enhance their study skills and metacognition. The work presented here shows how assessment tools, such as the BBT, can be used to guide and enhance teaching and student learning in a discipline-specific manner in postsecondary education. The BBT was first designed and extensively tested for a study in which we ranked almost 600 science questions from college life science exams and standardized tests. The BBT was then implemented in three different collegiate settings. Implementation of the BBT helped us to adjust our teaching to better enhance our students' current mastery of the material, design questions at higher cognitive skills levels, and assist students in studying for college-level exams and in writing study questions at higher levels of Bloom's Taxonomy. From this work we also created a suite of complementary tools that can assist biology faculty in creating classroom materials and exams at the appropriate level of Bloom's Taxonomy and students to successfully develop and answer questions that require higher-order cognitive skills. PMID:19047424

University of Delaware at TREC 2014

DTIC Science & Technology

2014-11-01

order, i.e. the keyword with the highest weight first, will make sure that places from categories that a user prefers more will occur at higher ranks...create sentences in two different ways. Here are two examples of actual descriptions that were generated and included in our runs: Sweet Beginnings...randomly selected. 2.2 Submitted runs Our main idea is to maintain diversity among all the genres that suit the user’s taste . We have submitted two runs

The analysis of senior high school students' physics HOTS in Bantul District measured using PhysReMChoTHOTS

NASA Astrophysics Data System (ADS)

Istiyono, Edi

2017-08-01

The purpose of this research is to describe the results of higher order thinking skills in physics (PhysHOTS) measurement including: (1) percentage of PhysHOTS level and (2) percentage of the domination of response in the category of students in each analyzing, evaluating, and creating skill. There were 404 10th grade students in Bantul District as the respondents of this research. The instrument used for measurement was PhysReMChoTHOTS. It was divided into two sets consisting of 44 items and including 8 anchor items stated valid by a Physicist, Physics Education Expert, and Physics Education Measurement Expert. The instrument was fit to PCM. The reliability coefficient of this test is 0.71, while the difficulty index of the items ranges from -0.61 to 0.51. The results of the measurement show that: (1) The percentage of each category of PhysHOTS for the 10th grade students in Bantul District for the very low, low, medium, high, and very high category is 4.75 %, 40.30 %, 33.45 %, 19.50 %, and 2.00 %, respectively; and (2) The order in analyzing skills, starts from the weakest, is attributing, differentiating and organizing. The order in evaluating skills, starts from the weakest, is critiquing and checking. Meanwhile, the order in creating skills, starts from the weakest, is producing, planning, and generating.

Sub-wavelength grating mode transformers in silicon slab waveguides.

PubMed

Bock, Przemek J; Cheben, Pavel; Schmid, Jens H; Delâge, André; Xu, Dan-Xia; Janz, Siegfried; Hall, Trevor J

2009-10-12

We report on several new types of sub-wavelength grating (SWG) gradient index structures for efficient mode coupling in high index contrast slab waveguides. Using a SWG, an adiabatic transition is achieved at the interface between silicon-on-insulator waveguides of different geometries. The SWG transition region minimizes both fundamental mode mismatch loss and coupling to higher order modes. By creating the gradient effective index region in the direction of propagation, we demonstrate that efficient vertical mode transformation can be achieved between slab waveguides of different core thickness. The structures which we propose can be fabricated by a single etch step. Using 3D finite-difference time-domain simulations we study the loss, polarization dependence and the higher order mode excitation for two types (triangular and triangular-transverse) of SWG transition regions between silicon-on-insulator slab waveguides of different core thicknesses. We demonstrate two solutions to reduce the polarization dependent loss of these structures. Finally, we propose an implementation of SWG structures to reduce loss and higher order mode excitation between a slab waveguide and a phase array of an array waveguide grating (AWG). Compared to a conventional AWG, the loss is reduced from -1.4 dB to < -0.2 dB at the slab-array interface.

Process-Structure-Property Relationships of Micron Thick Gadolinium Oxide Films Deposited by Reactive Electron Beam-Physical Vapor Deposition (EB-PVD)

DTIC Science & Technology

2014-12-01

surface roughness on film properties must be considered. Stability at the interface between the film and the substrate becomes critical with...etc.). Addition of atoms to the growing surface creates additional surface energy. Therefore, nuclei of a critical size 23 must be formed in order... critical nuclei size and a lower nucleation rate. Higher deposition rates result in a decreased critical nuclei size which leads to an increase in

Production of photoionized plasmas in the laboratory with x-ray line radiation

NASA Astrophysics Data System (ADS)

White, S.; Irwin, R.; Warwick, J. R.; Gribakin, G. F.; Sarri, G.; Keenan, F. P.; Riley, D.; Rose, S. J.; Hill, E. G.; Ferland, G. J.; Han, B.; Wang, F.; Zhao, G.

2018-06-01

In this paper we report the experimental implementation of a theoretically proposed technique for creating a photoionized plasma in the laboratory using x-ray line radiation. Using a Sn laser plasma to irradiate an Ar gas target, the photoionization parameter, ξ =4 π F /Ne , reached values of order 50 ergcm s-1 , where F is the radiation flux in ergc m-2s-1 . The significance of this is that this technique allows us to mimic effective spectral radiation temperatures in excess of 1 keV. We show that our plasma starts to be collisionally dominated before the peak of the x-ray drive. However, the technique is extendable to higher-energy laser systems to create plasmas with parameters relevant to benchmarking codes used to model astrophysical objects.

A soil catena on schist in northwestern California

USGS Publications Warehouse

Marron, D.C.; Popenoe, J.H.

1986-01-01

Soil characteristics in a small steepland watershed underlain by schist in a rainy, tectonically active area in northwestern California show close associations with drainage-basin position and slope characteristics. Five soil-topography units based on these associations are defined in the study watershed. Spatial relationships of soil series, and patterns of soil development as indicated by B-horizon clay content and redness, reflect interactions between pedogenesis and erosion. General soil-topography patterns include: (1) decreases in soil-development moving from low-order to higher-order stream vallyes; and (2) more developed soils on north-facing as opposed to south-facing slopes. Decreases in soil-profile development moving from slopes near low-order streams to slopes near higher-order streams approximately correlate with increases in gradient, vertical relief, and drainage density, and reflect a more vigorous stripping of regolith by erosion on the slopes near the higher-order streams. The larger percentage of area covered by the more developed soils on north-facing as opposed to south-facing slopes appears to reflect a contrast in the way dominant erosional processes interact with pedogenic processes. Roadcuts on middle and upper slopes show soil discontinuities indicative of disturbance by block slides or slumps or both. Roadcuts on lower slopes show disrupted soils in small bedrock hollows that could have been created by rapid, shallow landslides or by the pulled-up root wads of toppled trees. Soil-profile characteristics and soil-topography patterns in the study area demonstrate that both erosional and pedogenic processes need to be considered when interpreting characteristics of hillslope soils. ?? 1986.

Prediction of final error level in learning and repetitive control

NASA Astrophysics Data System (ADS)

Levoci, Peter A.

Repetitive control (RC) is a field that creates controllers to eliminate the effects of periodic disturbances on a feedback control system. The methods have applications in spacecraft problems, to isolate fine pointing equipment from periodic vibration disturbances such as slight imbalances in momentum wheels or cryogenic pumps. A closely related field of control design is iterative learning control (ILC) which aims to eliminate tracking error in a task that repeats, each time starting from the same initial condition. Experiments done on a robot at NASA Langley Research Center showed that the final error levels produced by different candidate repetitive and learning controllers can be very different, even when each controller is analytically proven to converge to zero error in the deterministic case. Real world plant and measurement noise and quantization noise (from analog to digital and digital to analog converters) in these control methods are acted on as if they were error sources that will repeat and should be cancelled, which implies that the algorithms amplify such errors. Methods are developed that predict the final error levels of general first order ILC, of higher order ILC including current cycle learning, and of general RC, in the presence of noise, using frequency response methods. The method involves much less computation than the corresponding time domain approach that involves large matrices. The time domain approach was previously developed for ILC and handles a certain class of ILC methods. Here methods are created to include zero-phase filtering that is very important in creating practical designs. Also, time domain methods are developed for higher order ILC and for repetitive control. Since RC and ILC must be implemented digitally, all of these methods predict final error levels at the sample times. It is shown here that RC can easily converge to small error levels between sample times, but that ILC in most applications will have large and diverging intersample error if in fact zero error is reached at the sample times. This is independent of the ILC law used, and is purely a property of the physical system. Methods are developed to address this issue.

Oxygen vacancy mediated enhanced photo-absorption from ZnO(0001) nanostructures fabricated by atom beam sputtering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solanki, Vanaraj; Joshi, Shalik R.; Mishra, Indrani

2016-08-07

The nanoscale patterns created on the ZnO(0001) surfaces during atom beam irradiation have been investigated here for their photo absorption response. Preferential sputtering, during irradiation, promotes Zn-rich zones that serve as the nucleation centers for the spontaneous creation of nanostructures. Nanostructured surfaces with bigger (78 nm) nanodots, displaying hexagonal ordering and long ranged periodic behavior, show higher photo absorption and a ∼0.09 eV reduced bandgap. These nanostructures also demonstrate higher concentration of oxygen vacancies which are crucial for these results. The enhanced photo-response, as observed here, has been achieved in the absence of any dopant elements.

Chimeric Plastics : a new class of thermoplastic

NASA Astrophysics Data System (ADS)

Sonnenschein, Mark

A new class of thermoplastics (dubbed ``Chimerics'') is described that exhibits a high temperature glass transition followed by high performance elastomer properties, prior to melting. These transparent materials are comprised of co-continuous phase-separated block copolymers. One block is an amorphous glass with a high glass transition temperature, and the second is a higher temperature phase transition block creating virtual thermoreversible crosslinks. The material properties are highly influenced by phase separation on the order of 10-30 nanometers. At lower temperatures the polymer reflects the sum of the block copolymer properties. As the amorphous phase glass transition is exceeded, the virtual crosslinks of the higher temperature second phase dominate the plastic properties, resulting in rubber-like elasticity.

The Concept of Order in Ancient China: A Curriculum Unit for History and Social Studies, Grades 6-9.

ERIC Educational Resources Information Center

Chan, Adrian; Chu, Richard

This unit addresses the questions of how and why people create order in a world whose randomness and order are for individuals to interpret. This unit uses the Han Dynasty of China as an example of one country's attempt to create such order and unite China successfully for over 400 years. The activities in this unit examine order in politics, in…

X-ray Emission Characteristics of Ultra-High Energy Density Relativistic Plasmas Created by Ultrafast Laser Irradiation of Nanowire Arrays

NASA Astrophysics Data System (ADS)

Hollinger, R. C.; Bargsten, C.; Shlyaptsev, V. N.; Pukhov, A.; Purvis, M. A.; Townsend, A.; Keiss, D.; Wang, Y.; Wang, S.; Prieto, A.; Rocca, J. J.

2014-10-01

Irradiation of ordered nanowire arrays with high contrast femtosecond laser pulses of relativistic intensity creates volumetrically heated near solid density plasmas characterized by multi-KeV temperatures and extreme degrees of ionization. The large hydrodynamic-to-radiative lifetime ratio of these plasmas results in very efficient X-ray generation. Au nanowire array plasmas irradiated at I 5×1018 Wcm-2 are measured to convert ~ 5 percent of the laser energy into h ν > 0.9 KeV X-rays, and >1 × 10-4 into h ν > 9 KeV photons, creating bright picosecond X-ray sources. The angular distribution of the higher energy photons is measured to change from isotropic into annular as the intensity increases, while softer X-ray emission (h ν >1 KeV) remains isotropic and nearly unchanged. Model simulations suggest the unexpected annular distribution of the hard X-rays might result from bremsstrahlung of fast electrons confined in a high aspect ratio near solid density plasma in which the electron-ion collision mean free-path is of the order of the plasma thickness. Work supported by the U.S Department of Energy, Fusion Energy Sciences and the Defense Threat Reduction Agency Grant HDTRA-1-10-1-0079. A.P was supported by of DFG-funded project TR18.

Identifying Functional Neighborhoods within the Cell Nucleus: Proximity Analysis of Early S-Phase Replicating Chromatin Domains to Sites of Transcription, RNA Polymerase II, HP1γ, Matrin 3 and SAF-A

PubMed Central

Malyavantham, Kishore S; Bhattacharya, Sambit; Barbeitos, Marcos; Mukherjee, Lopamudra; Xu, Jinhui; Fackelmayer, Frank O; Berezney, Ronald

2009-01-01

Higher order chromatin organization in concert with epigenetic regulation is a key process that determines gene expression at the global level. The organization of dynamic chromatin domains and their associated protein factors is intertwined with nuclear function to create higher levels of functional zones within the cell nucleus. As a step towards elucidating the organization and dynamics of these functional zones, we have investigated the spatial proximities among a constellation of functionally related sites that are found within euchromatic regions of the cell nucleus including: HP1γ, nascent transcript sites (TS), active DNA replicating sites in early S phase (PCNA) and RNA polymerase II sites. We report close associations among these different sites with proximity values specific for each combination. Analysis of matrin 3 and SAF-A sites demonstrates that these nuclear matrix proteins are highly proximal with the functionally related sites as well as to each other and display closely aligned and overlapping regions following application of the minimal spanning tree (MST) algorithm to visualize higher order network-like patterns. Our findings suggest that multiple factors within the nuclear microenvironment collectively form higher order combinatorial arrays of function. We propose a model for the organization of these functional neighborhoods which takes into account the proximity values of the individual sites and their spatial organization within the nuclear architecture. PMID:18618731

Long-range ballistic motion and coherent flow of long-lifetime polaritons

NASA Astrophysics Data System (ADS)

Steger, Mark; Liu, Gangqiang; Nelsen, Bryan; Gautham, Chitra; Snoke, David W.; Balili, Ryan; Pfeiffer, Loren; West, Ken

2013-12-01

Exciton polaritons can be created in semiconductor microcavities. These quasiparticles act as weakly interacting bosons with very light mass, of the order of 10-4 times the vacuum electron mass. Many experiments have shown effects which can be viewed as due to a Bose-Einstein condensate, or quasicondensate, of these particles. The lifetime of the particles in most of those experiments has been of the order of a few picoseconds, leading to significant nonequilibrium effects. By increasing the cavity quality, we have made samples with longer polariton lifetimes. With a photon lifetime on the order of 100-200 ps, polaritons in these structures can not only come closer to reaching true thermal equilibrium, a desired feature for many researchers working in this field, but they can also travel much longer distances. We observe the polaritons to ballistically travel on the order of 1 mm, and at higher densities we see transport of a coherent condensate, or quasicondensate, over comparable distances. In this paper we report a quantitative analysis of the flow of the polaritons both in a low-density, classical regime, and in the coherent regime at higher density. Our analysis gives us a measure of the intrinsic lifetime for photon decay from the microcavity and a measure of the strength of interactions of the polaritons.

Protein cage assembly across multiple length scales.

PubMed

Aumiller, William M; Uchida, Masaki; Douglas, Trevor

2018-05-21

Within the materials science community, proteins with cage-like architectures are being developed as versatile nanoscale platforms for use in protein nanotechnology. Much effort has been focused on the functionalization of protein cages with biological and non-biological moieties to bring about new properties of not only individual protein cages, but collective bulk-scale assemblies of protein cages. In this review, we report on the current understanding of protein cage assembly, both of the cages themselves from individual subunits, and the assembly of the individual protein cages into higher order structures. We start by discussing the key properties of natural protein cages (for example: size, shape and structure) followed by a review of some of the mechanisms of protein cage assembly and the factors that influence it. We then explore the current approaches for functionalizing protein cages, on the interior or exterior surfaces of the capsids. Lastly, we explore the emerging area of higher order assemblies created from individual protein cages and their potential for new and exciting collective properties.

Plasma turbulence and coherent structures in the polar cap observed by the ICI-2 sounding rocket

NASA Astrophysics Data System (ADS)

Spicher, A.; Miloch, W. J.; Clausen, L. B. N.; Moen, J. I.

2015-12-01

The electron density data from the ICI-2 sounding rocket experiment in the high-latitude F region ionosphere are analyzed using the higher-order spectra and higher-order statistics. Two regions of enhanced fluctuations are chosen for detailed analysis: the trailing edge of a polar cap patch and an electron density enhancement associated with particle precipitation. While these two regions exhibit similar power spectra, our analysis reveals that their internal structures are significantly different. The structures on the edge of the polar cap patch are likely due to nonlinear wave interactions since this region is characterized by intermittency and significant coherent mode coupling. The plasma enhancement subjected to precipitation, however, exhibits stronger random characteristics with uncorrelated phases of density fluctuations. These results suggest that particle precipitation plays a fundamental role in ionospheric plasma structuring creating turbulent-like structures. We discuss the physical mechanisms that cause plasma structuring as well as the possible processes for the low-frequency part of the spectrum in terms of plasma instabilities.

Structured Overlapping Grid Simulations of Contra-rotating Open Rotor Noise

NASA Technical Reports Server (NTRS)

Housman, Jeffrey A.; Kiris, Cetin C.

2015-01-01

Computational simulations using structured overlapping grids with the Launch Ascent and Vehicle Aerodynamics (LAVA) solver framework are presented for predicting tonal noise generated by a contra-rotating open rotor (CROR) propulsion system. A coupled Computational Fluid Dynamics (CFD) and Computational AeroAcoustics (CAA) numerical approach is applied. Three-dimensional time-accurate hybrid Reynolds Averaged Navier-Stokes/Large Eddy Simulation (RANS/LES) CFD simulations are performed in the inertial frame, including dynamic moving grids, using a higher-order accurate finite difference discretization on structured overlapping grids. A higher-order accurate free-stream preserving metric discretization with discrete enforcement of the Geometric Conservation Law (GCL) on moving curvilinear grids is used to create an accurate, efficient, and stable numerical scheme. The aeroacoustic analysis is based on a permeable surface Ffowcs Williams-Hawkings (FW-H) approach, evaluated in the frequency domain. A time-step sensitivity study was performed using only the forward row of blades to determine an adequate time-step. The numerical approach is validated against existing wind tunnel measurements.

Challenges of the biomedical engineering education in Europe.

PubMed

Magjarevic, Ratko; Lackovic, Igor; Bliznakov, Zhivko; Pallikarakis, Nicolas

2010-01-01

Higher education in Europe has passed through a very dynamic period of changes during the last ten years. Since the signing of the Bologna Declaration in 1999 by the Ministers of Education from the EU states, European higher education system has aimed toward establishing harmonized programs enabling students and teachers to extensively exchange knowledge, ideas and skills. Education in the field of Biomedical Engineering has experienced changes also because of the research and development in the field which was more intensive than in other fields. Besides research in new power sources, it is the most intensive and productive research field. Much of the development in BME education in Europe is influenced by the European research policy expressed through the 7th Framework Programme where health is the major theme. In order to foster and support the changes in the European Higher Education Area (EHEA) according to the needs of research sector and the labor market, the Tempus scheme of projects was established. Tempus scheme aims to support the modernization of higher education and create an area of co-operation in the countries surrounding the EU. Our Tempus project, CRH-BME "Curricula Reformation and Harmonization in the field of Biomedical Engineering" aims to create guidelines for updating existing curricula in the field of BME in Europe in order to meet recent and future developments in the area, address new emerging interdisciplinary domains that appear as the result of the R&D progress and respond to the BME job market demands. In this paper, some policy and economic factors affecting BME education in Europe are discussed and the results of a BME education survey we prepared within the Tempus CHR-BME project are presented. The number of BME programmes in Europe has in the last decade significantly increased and there are more BME specializations as the result of growing complexity of the research and production in the field.

Creation of vector beams from a polarization diffraction grating using a programmable liquid crystal spatial light modulator and a q-plate

NASA Astrophysics Data System (ADS)

Badham, Katherine Emily

This thesis presents the ability of complete polarization control of light to create a polarization diffraction grating (PDG). This system has the ability to create diffracted light with each order having a separate high-order polarization state in one location on the optical axis. First, an external Excel program is used to create a grating phase profile from userspecified target diffraction orders. High-order vector beams in this PDG are created using a combination of two devices---a liquid crystal spatial light modulator (LC-SLM) manufactured by Seiko Epson, and a tunable q -plate from Citizen Holdings Co. The transmissive SLM is positioned in an optical setup with a reflective architecture allowing control over both the horizontal and vertical components of the laser beam. The SLM has its LC director oriented vertically only affecting the vertically polarized state, however, the optical setup allows modulation of both vertical and horizontal components by the use of a quarter-wave plate (QWP) and a mirror to rotate the polarizations 90 degrees. Each half of the SLM is encoded with an anisotropic phase-only diffraction grating which are superimposed to create a select number of orders with the desired polarization states and equally distributed intensity. The technique of polarimetry is used to confirm the polarization state of each diffraction order. The q-plate is an inhomogeneous birefringent waveplate which has the ability to convert zero-order vector beams into first-order vector beams. The physical placement of this device into the system converts the orders with zero-order polarization states to first-order polarization states. The light vector patterns of each diffraction order confirm which first-order polarization state of is produced. A specially made PDG sextuplicator is encoded onto the SLM to generate six diffraction orders with separate states of polarization.

Medical school 2.0: How we developed a student-generated question bank using small group learning.

PubMed

Gooi, Adrian C C; Sommerfeld, Connor S

2015-01-01

The multiple-choice question (MCQ) is one of the most common methods for formative and summative assessment in medical school. Common challenges with this format include (1) creating vetted questions and (2) involving students in higher-order learning activities. Involving medical students in the creation of MCQs may ameliorate both of these challenges. What we did: We used a small group learning structure to develop a student-generated question bank. Students created their own MCQ based on self-study materials, and then reviewed each other's questions within small groups. Selected questions were reviewed with the class as a whole. All questions were later vetted by the instructor and incorporated into a question bank that students could access for formative learning. Post-session survey indicated that 91% of the students felt that the class-created MCQ question bank was a valuable resource, and 86% of students would be interested in collaborating with the class for creating practice questions in future sessions. Developing a student-generated question bank can improve the depth and interactivity of student learning, increase session enjoyment and provide a potential resource for student assessment.

The impact of podcasts, screencasts, and vodcasts on student achievement in the science classroom

NASA Astrophysics Data System (ADS)

Pena, Ruben, Jr.

Educators in today's society are in search for different ways to reach their students in order to keep them engaged and active in the learning process. There are several strategies that teachers have utilized in the classroom in order to reach all students. Now seen more in the classroom is the use of technology in one form or another. There are several types of technologies that one may employ while in the classroom, but seen more recently is the use of podcasts, screencasts, and vodcasts. The major purpose of the study was to investigate the impact of using podcasts, screencasts, and vodcasts in conjunction with science curriculum on student academic achievement. Two intermediate schools from the south Texas region were chosen as a convenience sample for the study because one school utilized the technology of podcasts, screencasts, and vodcasts at the student created level while the other school did not utilize podcasts, screencasts, and vodcasts at the student created level. The researcher collected scores from curriculum based assessments that were aligned with the Texas Essential Knowledge and Skills (TEKS) for comparison between the two different groups, while controlling grade five science TAKS scores for group equalization. Once all data was collected, scores were entered into the Statistical Package for the Social Sciences (SPSS) and were analyzed using an analysis of covariance. The ANCOVA allowed the researcher to see that differences among curriculum based assessments scores existed between the two different schools. Scores were higher for the students who utilized podcasts, screencasts, and vodcasts at the student created level when compared to those scores for students who did not utilize podcasts, screencasts, and vodcasts at the student created level. This study showed the benefits reaped of having students create their own podcasts, screencasts, and vodcasts. Having students create their own technology has them actively engaged in the learning process and this is the goal of every educator. Looking at this notion shows that having students create their own technology projects, any type of technology, enhances academic achievement which is expected in today's classroom.

10 CFR 216.7 - Conflict in priority orders.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Conflict in priority orders. 216.7 Section 216.7 Energy... DOMESTIC ENERGY SUPPLIES § 216.7 Conflict in priority orders. If it appears that the use of assistance pursuant to DPA section 101(c) creates or threatens to create a conflict with priorities and allocation...

Higher order thinking skills competencies required by outcomes-based education from learners.

PubMed

Chabeli, M M

2006-08-01

Outcomes-Based Education (OBE) brought about a significant paradigm shift in the education and training of learners in South Africa. OBE requires a shift from focusing on the teacher input (instruction offerings or syllabuses expressed in terms of content), to focusing on learner outcomes. OBE is moving away from 'transmission' models to constructivistic, learner-centered models that put emphasis on learning as an active process (Nieburh, 1996:30). Teachers act as facilitators and mediators of learning (Norms and Standards, Government Gazette vol 415, no 20844 of 2000). Facilitators are responsible to create the environment that is conducive for learners to construct their own knowledge, skills and values through interaction (Peters, 2000). The first critical cross-field outcome accepted by the South African Qualification Framework (SAQA) is that learners should be able to identify and solve problems by using critical and creative thinking skills. This paper seeks to explore some higher order thinking skills competencies required by OBE from learners such as critical thinking, reflective thinking, creative thinking, dialogic / dialectic thinking, decision making, problem solving and emotional intelligence and their implications in facilitating teaching and learning from the theoretical perspective. The philosophical underpinning of these higher order thinking skills is described to give direction to the study. It is recommended that a study focusing on the assessment of these intellectual concepts be made. The study may be qualitative, quantitative or mixed methods in nature (Creswell 2005).

Sandbox University: estimating influence of institutional action.

PubMed

Forsman, Jonas; Mann, Richard P; Linder, Cedric; van den Bogaard, Maartje

2014-01-01

The approach presented in this article represents a generalizable and adaptable methodology for identifying complex interactions in educational systems and for investigating how manipulation of these systems may affect educational outcomes of interest. Multilayer Minimum Spanning Tree and Monte-Carlo methods are used. A virtual Sandbox University is created in order to facilitate effective identification of successful and stable initiatives within higher education, which can affect students' credits and student retention - something that has been lacking up until now. The results highlight the importance of teacher feedback and teacher-student rapport, which is congruent with current educational findings, illustrating the methodology's potential to provide a new basis for further empirical studies of issues in higher education from a complex systems perspective.

Sandbox University: Estimating Influence of Institutional Action

PubMed Central

Forsman, Jonas; Mann, Richard P.; Linder, Cedric; van den Bogaard, Maartje

2014-01-01

The approach presented in this article represents a generalizable and adaptable methodology for identifying complex interactions in educational systems and for investigating how manipulation of these systems may affect educational outcomes of interest. Multilayer Minimum Spanning Tree and Monte-Carlo methods are used. A virtual Sandbox University is created in order to facilitate effective identification of successful and stable initiatives within higher education, which can affect students' credits and student retention – something that has been lacking up until now. The results highlight the importance of teacher feedback and teacher-student rapport, which is congruent with current educational findings, illustrating the methodology's potential to provide a new basis for further empirical studies of issues in higher education from a complex systems perspective. PMID:25054313

Quantum phases of quadrupolar Fermi gases in coupled one-dimensional systems

NASA Astrophysics Data System (ADS)

Huang, Wen-Min; Lahrz, M.; Mathey, L.

2014-01-01

Following the recent proposal to create quadrupolar gases [Bhongale et al., Phys. Rev. Lett. 110, 155301 (2013), 10.1103/PhysRevLett.110.155301], we investigate what quantum phases can be created in these systems in one dimension. We consider a geometry of two coupled one-dimensional (1D) systems, and derive the quantum phase diagram of ultracold fermionic atoms interacting via quadrupole-quadrupole interactions within a Tomonaga-Luttinger-liquid framework. We map out the phase diagram as a function of the distance between the two tubes and the angle between the direction of the tubes and the quadrupolar moments. The latter can be controlled by an external field. We show that there are two magic angles θB,1c and θB,2c between 0 and π /2, where the intratube quadrupolar interactions vanish and change signs. Adopting a pseudospin language with regard to the two 1D systems, the system undergoes a spin-gap transition and displays a zigzag density pattern, above θB,2c and below θB,1c. Between the two magic angles, we show that polarized triplet superfluidity and a planar spin-density-wave order compete with each other. The latter corresponds to a bond-order solid in higher dimensions. We demonstrate that this order can be further stabilized by applying a commensurate periodic potential along the tubes.

Sunlight creates oxygenated species in water-soluble fractions of Deepwater Horizon oil.

PubMed

Ray, Phoebe Z; Chen, Huan; Podgorski, David C; McKenna, Amy M; Tarr, Matthew A

2014-09-15

In order to assess the impact of sunlight on oil fate, Macondo well oil from the Deepwater Horizon (DWH) rig was mixed with pure water and irradiated with simulated sunlight. After irradiation, the water-soluble organics (WSO) from the dark and irradiated samples were extracted and characterized by ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Liquid-liquid extraction yielded two fractions from dark and irradiated water/oil mixtures: acidic WSOs (negative-ion electrospray (ESI)), and base/neutral WSOs (positive-ion ESI) coupled to FT-ICR MS to catalog molecular-level transformations that occur to Macondo-derived WSOs after solar irradiation. Such direct measure of oil phototransformation has not been previously reported. The most abundant heteroatom class detected in the irradiated WSO acid fractions correspond to molecules that contain five oxygens (O5), while the most abundant acids in the dark samples contain two oxygen atoms per molecule (O2). Higher-order oxygen classes (O5-O9) were abundant in the irradiated samples, but <1.5% relative abundance in the dark sample. The increased abundance of higher-order oxygen classes in the irradiated samples relative to the dark samples indicates that photooxidized components of the Macondo crude oil become water-soluble after irradiation. The base/neutral fraction showed decreased abundance of pyridinic nitrogen (N1) concurrent with an increased abundance of N1Ox classes after irradiation. The predominance of higher-order oxygen classes indicates that multiple photochemical pathways exist that result in oxidation of petroleum compounds. Copyright © 2014 Elsevier B.V. All rights reserved.

78 FR 30357 - Self-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... proposed change is designed to create an appropriate fee structure for Complex Orders on the Exchange. The... because it is designed to allow the Exchange to better compete with other exchanges for Complex Order flow... To Create a New Fee Structure for Complex Orders on the BOX Market LLC Options Facility May 16, 2013...

Generation of Earth's First-Order Biodiversity Pattern

NASA Astrophysics Data System (ADS)

Krug, Andrew Z.; Jablonski, David; Valentine, James W.; Roy, Kaustuv

2009-02-01

The first-order biodiversity pattern on Earth today and at least as far back as the Paleozoic is the latitudinal diversity gradient (LDG), a decrease in richness of species and higher taxa from the equator to the poles. LDGs are produced by geographic trends in origination, extinction, and dispersal over evolutionary timescales, so that analyses of static patterns will be insufficient to reveal underlying processes. The fossil record of marine bivalve genera, a model system for the analysis of biodiversity dynamics over large temporal and spatial scales, shows that an origination and range-expansion gradient plays a major role in generating the LDG. Peak origination rates and peak diversities fall within the tropics, with range expansion out of the tropics the predominant spatial dynamic thereafter. The origination-diversity link occurs even in a "contrarian" group whose diversity peaks at midlatitudes, an exception proving the rule that spatial variations in origination are key to latitudinal diversity patterns. Extinction rates are lower in polar latitudes (≥60°) than in temperate zones and thus cannot create the observed gradient alone. They may, however, help to explain why origination and immigration are evidently damped in higher latitudes. We suggest that species require more resources in higher latitudes, for the seasonality of primary productivity increases by more than an order of magnitude from equatorial to polar regions. Higher-latitude species are generalists that, unlike potential immigrants, are adapted to garner the large share of resources required for incumbency in those regions. When resources are opened up by extinctions, lineages spread chiefly poleward and chiefly through speciation.

Generation of Earth's first-order biodiversity pattern.

PubMed

Krug, Andrew Z; Jablonski, David; Valentine, James W; Roy, Kaustuv

2009-01-01

The first-order biodiversity pattern on Earth today and at least as far back as the Paleozoic is the latitudinal diversity gradient (LDG), a decrease in richness of species and higher taxa from the equator to the poles. LDGs are produced by geographic trends in origination, extinction, and dispersal over evolutionary timescales, so that analyses of static patterns will be insufficient to reveal underlying processes. The fossil record of marine bivalve genera, a model system for the analysis of biodiversity dynamics over large temporal and spatial scales, shows that an origination and range-expansion gradient plays a major role in generating the LDG. Peak origination rates and peak diversities fall within the tropics, with range expansion out of the tropics the predominant spatial dynamic thereafter. The origination-diversity link occurs even in a "contrarian" group whose diversity peaks at midlatitudes, an exception proving the rule that spatial variations in origination are key to latitudinal diversity patterns. Extinction rates are lower in polar latitudes (> or =60 degrees ) than in temperate zones and thus cannot create the observed gradient alone. They may, however, help to explain why origination and immigration are evidently damped in higher latitudes. We suggest that species require more resources in higher latitudes, for the seasonality of primary productivity increases by more than an order of magnitude from equatorial to polar regions. Higher-latitude species are generalists that, unlike potential immigrants, are adapted to garner the large share of resources required for incumbency in those regions. When resources are opened up by extinctions, lineages spread chiefly poleward and chiefly through speciation.

Creating an Integrated Curriculum--The 'Higher' In Higher Education. 1981 Current Issues in Higher Education, No. 2.

ERIC Educational Resources Information Center

American Association for Higher Education, Washington, DC.

Perspectives on creating an integrated college curriculum are presented in four papers. In "What is 'Higher' About Higher Education?" Harlan Cleveland suggests that colleges and universities should promote a global view and understanding of problems on society and international interdependence and should develop the capacity to analyze…

Best Practice Strategies for Effective Use of Questions as a Teaching Tool

PubMed Central

Elsner, Jamie; Haines, Stuart T.

2013-01-01

Questions have long been used as a teaching tool by teachers and preceptors to assess students’ knowledge, promote comprehension, and stimulate critical thinking. Well-crafted questions lead to new insights, generate discussion, and promote the comprehensive exploration of subject matter. Poorly constructed questions can stifle learning by creating confusion, intimidating students, and limiting creative thinking. Teachers most often ask lower-order, convergent questions that rely on students’ factual recall of prior knowledge rather than asking higher-order, divergent questions that promote deep thinking, requiring students to analyze and evaluate concepts. This review summarizes the taxonomy of questions, provides strategies for formulating effective questions, and explores practical considerations to enhance student engagement and promote critical thinking. These concepts can be applied in the classroom and in experiential learning environments. PMID:24052658

Best practice strategies for effective use of questions as a teaching tool.

PubMed

Tofade, Toyin; Elsner, Jamie; Haines, Stuart T

2013-09-12

Questions have long been used as a teaching tool by teachers and preceptors to assess students' knowledge, promote comprehension, and stimulate critical thinking. Well-crafted questions lead to new insights, generate discussion, and promote the comprehensive exploration of subject matter. Poorly constructed questions can stifle learning by creating confusion, intimidating students, and limiting creative thinking. Teachers most often ask lower-order, convergent questions that rely on students' factual recall of prior knowledge rather than asking higher-order, divergent questions that promote deep thinking, requiring students to analyze and evaluate concepts. This review summarizes the taxonomy of questions, provides strategies for formulating effective questions, and explores practical considerations to enhance student engagement and promote critical thinking. These concepts can be applied in the classroom and in experiential learning environments.

Examination of the Link Between Medication Adherence and Use of Mail-Order Pharmacies in Chronic Disease States.

PubMed

Fernandez, Elena V; McDaniel, Jennifer A; Carroll, Norman V

2016-11-01

Higher medication adherence is associated with positive health outcomes, including reduction in hospitalizations and costs, and many interventions have been implemented to increase patient adherence. To determine whether patients experience higher medication adherence by using mail-order or retail pharmacies. Articles pertaining to retail and mail-order pharmacies and medication adherence were collected from 3 literature databases: MEDLINE, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and International Pharmaceutical Abstracts (IPA). Searches were created for each database and articles were compiled. Articles were screened for exclusion factors, and final articles (n=15) comparing medication adherence in patients utilizing mail and retail pharmacies were analyzed. For each study, various factors were identified including days supply, patients' out-of-pocket costs, prior adherence behavior, therapeutic class, measure of adherence, limitations, and results. Studies were then categorized by disease state, and relevant information from each study was compared and contrasted. The majority of studies-14 out of the 15 reviewed-supported higher adherence through the mail-order dispensing channel rather than through retail pharmacies. There are a number of reasons for the differences in adherence between the channels. Study patients who used mail-order pharmacies were more likely to have substantially higher prior adherence behavior, socioeconomic status, and days supply of medicines received and were likely to be offered financial incentives to use mail-order. The few studies that attempted to statistically control for these factors also found that patients using mail-order services were more adherent but the size of the differences was smaller. The extent to which these results indicate an inherent adherence advantage of mail-order pharmacy (as distinct from adherence benefits due to greater days supply, lower copays, or more adherent patients selecting mail-order pharmacies) depends on how well the statistical controls adjusted for the substantial differences between the mail and retail samples. While the research strongly indicates that consumers who use mail-order pharmacies are more likely to be adherent, more research is needed before it can be conclusively determined that use of mail-order pharmacies causes higher adherence. No outside funding supported this study. Fernandez was partially funded by a Virginia Commonwealth University School of Pharmacy PharmD/PhD Summer Fellowship for work on this project. The authors declare no other potential conflicts of interest. Study concept and design were contributed by Carroll and Fernandez. Fernandez took the lead in data collection, along with Carroll and McDaniel, and data interpretation was performed by Carroll and Fernandez. The manuscript was written and revised by Carroll and Fernandez, with assistance from McDaniel.

A Handheld Open-Field Infant Keratometer (An American Ophthalmological Society Thesis)

PubMed Central

Miller, Joseph M.

2010-01-01

Purpose: To design and evaluate a new infant keratometer that incorporates an unobstructed view of the infant with both eyes (open-field design). Methods: The design of the open-field infant keratometer is presented, and details of its construction are given. The design incorporates a single-ring keratoscope for measurement of corneal astigmatism over a 4-mm region of the cornea and includes a rectangular grid target concentric within the ring to allow for the study of higher-order aberrations of the eye. In order to calibrate the lens and imaging system, a novel telecentric test object was constructed and used. The system was bench calibrated against steel ball bearings of known dimensions and evaluated for accuracy while being used in handheld mode in a group of 16 adult cooperative subjects. It was then evaluated for testability in a group of 10 infants and toddlers. Results: Results indicate that while the device achieved the goal of creating an open-field instrument containing a single-ring keratoscope with a concentric grid array for the study of higher-order aberrations, additional work is required to establish better control of the vertex distance. Conclusion: The handheld open-field infant keratometer demonstrates testability suitable for the study of infant corneal astigmatism. Use of collimated light sources in future iterations of the design must be incorporated in order to achieve the accuracy required for clinical investigation. PMID:21212850

A handheld open-field infant keratometer (an american ophthalmological society thesis).

PubMed

Miller, Joseph M

2010-12-01

To design and evaluate a new infant keratometer that incorporates an unobstructed view of the infant with both eyes (open-field design). The design of the open-field infant keratometer is presented, and details of its construction are given. The design incorporates a single-ring keratoscope for measurement of corneal astigmatism over a 4-mm region of the cornea and includes a rectangular grid target concentric within the ring to allow for the study of higher-order aberrations of the eye. In order to calibrate the lens and imaging system, a novel telecentric test object was constructed and used. The system was bench calibrated against steel ball bearings of known dimensions and evaluated for accuracy while being used in handheld mode in a group of 16 adult cooperative subjects. It was then evaluated for testability in a group of 10 infants and toddlers. Results indicate that while the device achieved the goal of creating an open-field instrument containing a single-ring keratoscope with a concentric grid array for the study of higher-order aberrations, additional work is required to establish better control of the vertex distance. The handheld open-field infant keratometer demonstrates testability suitable for the study of infant corneal astigmatism. Use of collimated light sources in future iterations of the design must be incorporated in order to achieve the accuracy required for clinical investigation.

Data envelopment analysis with upper bound on output to measure efficiency performance of departments in Malaikulsaleh University

NASA Astrophysics Data System (ADS)

Abdullah, Dahlan; Suwilo, Saib; Tulus; Mawengkang, Herman; Efendi, Syahril

2017-09-01

The higher education system in Indonesia can be considered not only as an important source of developing knowledge in the country, but also could create positive living conditions for the country. Therefore it is not surprising that enrollments in higher education continue to expand. However, the implication of this situation, the Indonesian government is necessarily to support more funds. In the interest of accountability, it is essential to measure the efficiency for this higher institution. Data envelopment analysis (DEA) is a method to evaluate the technical efficiency of production units which have multiple input and output. The higher learning institution considered in this paper is Malikussaleh University located in Lhokseumawe, a city in Aceh province of Indonesia. This paper develops a method to evaluate efficiency for all departments in Malikussaleh University using DEA with bounded output. Accordingly, we present some important differences in efficiency of those departments. Finally we discuss the effort should be done by these departments in order to become efficient.

Thermal noise from optical coatings in gravitational wave detectors.

PubMed

Harry, Gregory M; Armandula, Helena; Black, Eric; Crooks, D R M; Cagnoli, Gianpietro; Hough, Jim; Murray, Peter; Reid, Stuart; Rowan, Sheila; Sneddon, Peter; Fejer, Martin M; Route, Roger; Penn, Steven D

2006-03-01

Gravitational waves are a prediction of Einstein's general theory of relativity. These waves are created by massive objects, like neutron stars or black holes, oscillating at speeds appreciable to the speed of light. The detectable effect on the Earth of these waves is extremely small, however, creating strains of the order of 10(-21). There are a number of basic physics experiments around the world designed to detect these waves by using interferometers with very long arms, up to 4 km in length. The next-generation interferometers are currently being designed, and the thermal noise in the mirrors will set the sensitivity over much of the usable bandwidth. Thermal noise arising from mechanical loss in the optical coatings put on the mirrors will be a significant source of noise. Achieving higher sensitivity through lower mechanical loss coatings, while preserving the crucial optical and thermal properties, is an area of active research right now.

Neutral depletion and the helicon density limit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magee, R. M.; Galante, M. E.; Carr, J. Jr.

2013-12-15

It is straightforward to create fully ionized plasmas with modest rf power in a helicon. It is difficult, however, to create plasmas with density >10{sup 20} m{sup −3}, because neutral depletion leads to a lack of fuel. In order to address this density limit, we present fast (1 MHz), time-resolved measurements of the neutral density at and downstream from the rf antenna in krypton helicon plasmas. At the start of the discharge, the neutral density underneath the antenna is reduced to 1% of its initial value in 15 μs. The ionization rate inferred from these data implies that the electronmore » temperature near the antenna is much higher than the electron temperature measured downstream. Neutral density measurements made downstream from the antenna show much slower depletion, requiring 14 ms to decrease by a factor of 1/e. Furthermore, the downstream depletion appears to be due to neutral pumping rather than ionization.« less

An artificial molecular pump

NASA Astrophysics Data System (ADS)

Cheng, Chuyang; McGonigal, Paul R.; Schneebeli, Severin T.; Li, Hao; Vermeulen, Nicolaas A.; Ke, Chenfeng; Stoddart, J. Fraser

2015-06-01

Carrier proteins consume fuel in order to pump ions or molecules across cell membranes, creating concentration gradients. Their control over diffusion pathways, effected entirely through noncovalent bonding interactions, has inspired chemists to devise artificial systems that mimic their function. Here, we report a wholly artificial compound that acts on small molecules to create a gradient in their local concentration. It does so by using redox energy and precisely organized noncovalent bonding interactions to pump positively charged rings from solution and ensnare them around an oligomethylene chain, as part of a kinetically trapped entanglement. A redox-active viologen unit at the heart of a dumbbell-shaped molecular pump plays a dual role, first attracting and then repelling the rings during redox cycling, thereby enacting a flashing energy ratchet mechanism with a minimalistic design. Our artificial molecular pump performs work repetitively for two cycles of operation and drives rings away from equilibrium toward a higher local concentration.

Commercial Off-The-Shelf (COTS) Parts Risk and Reliability User and Application Guide

NASA Technical Reports Server (NTRS)

White, Mark

2017-01-01

All COTS parts are not created equal. Because they are not created equal, the notion that one can force the commercial industry to follow a set of military specifications and standards, along with the certifications, audits and qualification commitments that go with them, is unrealistic for the sale of a few parts. The part technologies that are Defense Logistics Agency (DLA) certified or Military Specification (MS) qualified, are several generations behind the state-of-the-art high-performance parts that are required for the compact, higher performing systems for the next generation of spacecraft and instruments. The majority of the part suppliers are focused on the portion of the market that is producing high-tech commercial products and systems. To that end, in order to compete in the high performance and leading edge advanced technological systems, an alternative approach to risk assessment and reliability prediction must be considered.

Deterministic quantum nonlinear optics with single atoms and virtual photons

NASA Astrophysics Data System (ADS)

Kockum, Anton Frisk; Miranowicz, Adam; Macrı, Vincenzo; Savasta, Salvatore; Nori, Franco

2017-06-01

We show how analogs of a large number of well-known nonlinear-optics phenomena can be realized with one or more two-level atoms coupled to one or more resonator modes. Through higher-order processes, where virtual photons are created and annihilated, an effective deterministic coupling between two states of such a system can be created. In this way, analogs of three-wave mixing, four-wave mixing, higher-harmonic and -subharmonic generation (i.e., up- and down-conversion), multiphoton absorption, parametric amplification, Raman and hyper-Raman scattering, the Kerr effect, and other nonlinear processes can be realized. In contrast to most conventional implementations of nonlinear optics, these analogs can reach unit efficiency, only use a minimal number of photons (they do not require any strong external drive), and do not require more than two atomic levels. The strength of the effective coupling in our proposed setups becomes weaker the more intermediate transition steps are needed. However, given the recent experimental progress in ultrastrong light-matter coupling and improvement of coherence times for engineered quantum systems, especially in the field of circuit quantum electrodynamics, we estimate that many of these nonlinear-optics analogs can be realized with currently available technology.

Sensitivity of an Antarctic Ice Sheet Model to Sub-Ice-Shelf Melting

NASA Astrophysics Data System (ADS)

Lipscomb, W. H.; Leguy, G.; Urban, N. M.; Berdahl, M.

2017-12-01

Theory and observations suggest that marine-based sectors of the Antarctic ice sheet could retreat rapidly under ocean warming and increased melting beneath ice shelves. Numerical models of marine ice sheets vary widely in sensitivity, depending on grid resolution and the parameterization of key processes (e.g., calving and hydrofracture). Here we study the sensitivity of the Antarctic ice sheet to ocean warming and sub-shelf melting in standalone simulations of the Community Ice Sheet Model (CISM). Melt rates either are prescribed based on observations and high-resolution ocean model output, or are derived from a plume model forced by idealized ocean temperature profiles. In CISM, we vary the model resolution (between 1 and 8 km), Stokes approximation (shallow-shelf, depth-integrated higher-order, or 3D higher-order) and calving scheme to create an ensemble of plausible responses to sub-shelf melting. This work supports a broader goal of building statistical and reduced models that can translate large-scale Earth-system model projections to changes in Antarctic ocean temperatures and ice sheet discharge, thus better quantifying uncertainty in Antarctic-sourced sea-level rise.

Three-Dimensional Modeling of Aircraft High-Lift Components with Vehicle Sketch Pad

NASA Technical Reports Server (NTRS)

Olson, Erik D.

2016-01-01

Vehicle Sketch Pad (OpenVSP) is a parametric geometry modeler that has been used extensively for conceptual design studies of aircraft, including studies using higher-order analysis. OpenVSP can model flap and slat surfaces using simple shearing of the airfoil coordinates, which is an appropriate level of complexity for lower-order aerodynamic analysis methods. For three-dimensional analysis, however, there is not a built-in method for defining the high-lift components in OpenVSP in a realistic manner, or for controlling their complex motions in a parametric manner that is intuitive to the designer. This paper seeks instead to utilize OpenVSP's existing capabilities, and establish a set of best practices for modeling high-lift components at a level of complexity suitable for higher-order analysis methods. Techniques are described for modeling the flap and slat components as separate three-dimensional surfaces, and for controlling their motion using simple parameters defined in the local hinge-axis frame of reference. To demonstrate the methodology, an OpenVSP model for the Energy-Efficient Transport (EET) AR12 wind-tunnel model has been created, taking advantage of OpenVSP's Advanced Parameter Linking capability to translate the motions of the high-lift components from the hinge-axis coordinate system to a set of transformations in OpenVSP's frame of reference.

Higher Education Reform in Brazil: Reinforcing Marketization

ERIC Educational Resources Information Center

de Siqueira, Angela C.

2009-01-01

Higher education in Brazil began based on institutions organized as isolated establishments, and mostly privately owned. Nonetheless, public institutions created as universities and developing research activities and other services became the desired ideal for higher education. The first educational institutions in Brazil were created in the…

Advanced software development workstation. Engineering scripting language graphical editor: DRAFT design document

NASA Technical Reports Server (NTRS)

1991-01-01

The Engineering Scripting Language (ESL) is a language designed to allow nonprogramming users to write Higher Order Language (HOL) programs by drawing directed graphs to represent the program and having the system generate the corresponding program in HOL. The ESL system supports user generation of HOL programs through the manipulation of directed graphs. The components of this graphs (nodes, ports, and connectors) are objects each of which has its own properties and property values. The purpose of the ESL graphical editor is to allow the user to create or edit graph objects which represent programs.

Parts plus pipes: synthetic biology approaches to metabolic engineering

PubMed Central

Boyle, Patrick M.; Silver, Pamela A.

2011-01-01

Synthetic biologists combine modular biological “parts” to create higher-order devices. Metabolic engineers construct biological “pipes” by optimizing the microbial conversion of basic substrates to desired compounds. Many scientists work at the intersection of these two philosophies, employing synthetic devices to enhance metabolic engineering efforts. These integrated approaches promise to do more than simply improve product yields; they can expand the array of products that are tractable to produce biologically. In this review, we explore the application of synthetic biology techniques to next-generation metabolic engineering challenges, as well as the emerging engineering principles for biological design. PMID:22037345

Evolution: the dialogue between life and death

NASA Astrophysics Data System (ADS)

Holliday, robin

1997-12-01

Organisms have the ability to harness energy from the environment to create order and to reproduce. From early error-prone systems natural selection acted to produce present day organisms with high accuracy in the synthesis of macromolecules. The environment imposes strict limits on reproduction, so evolution is always accompanied by the discarding of a large proportion of the less fit cells, or organisms. Sexual reproduction depends on an immortal germline and a soma which may be immortal or mortal. Higher animals living in hazardous environments have evolved aging and death of the soma for the benefit of the ongoing germline.

Investigation of Mechanical Breakdowns Leading to Lock Closures

DTIC Science & Technology

2017-06-01

wide variety of issues lead to emergency clo- sures, yet no specific problem (s) that frequently cause unscheduled clo- sures were identified. Table 2-3...Reporting Used to create basic work orders, report problems or malfunctions, or request work to be done. Used to create and process work orders from...work order page for recording the failure class, problem , cause, and remedy (Figure 3-1). Appendix C includes a full list of failure classes

Hybrid glasses from strong and fragile metal-organic framework liquids.

PubMed

Bennett, Thomas D; Tan, Jin-Chong; Yue, Yuanzheng; Baxter, Emma; Ducati, Caterina; Terrill, Nick J; Yeung, Hamish H-M; Zhou, Zhongfu; Chen, Wenlin; Henke, Sebastian; Cheetham, Anthony K; Greaves, G Neville

2015-08-28

Hybrid glasses connect the emerging field of metal-organic frameworks (MOFs) with the glass formation, amorphization and melting processes of these chemically versatile systems. Though inorganic zeolites collapse around the glass transition and melt at higher temperatures, the relationship between amorphization and melting has so far not been investigated. Here we show how heating MOFs of zeolitic topology first results in a low density 'perfect' glass, similar to those formed in ice, silicon and disaccharides. This order-order transition leads to a super-strong liquid of low fragility that dynamically controls collapse, before a subsequent order-disorder transition, which creates a more fragile high-density liquid. After crystallization to a dense phase, which can be remelted, subsequent quenching results in a bulk glass, virtually identical to the high-density phase. We provide evidence that the wide-ranging melting temperatures of zeolitic MOFs are related to their network topologies and opens up the possibility of 'melt-casting' MOF glasses.

Design study of beam position monitors for measuring second-order moments of charged particle beams

NASA Astrophysics Data System (ADS)

Yanagida, Kenichi; Suzuki, Shinsuke; Hanaki, Hirofumi

2012-01-01

This paper presents a theoretical investigation on the multipole moments of charged particle beams in two-dimensional polar coordinates. The theoretical description of multipole moments is based on a single-particle system that is expanded to a multiparticle system by superposition, i.e., summing over all single-particle results. This paper also presents an analysis and design method for a beam position monitor (BPM) that detects higher-order (multipole) moments of a charged particle beam. To calculate the electric fields, a numerical analysis based on the finite difference method was created and carried out. Validity of the numerical analysis was proven by comparing the numerical with the analytical results for a BPM with circular cross section. Six-electrode BPMs with circular and elliptical cross sections were designed for the SPring-8 linac. The results of the numerical calculations show that the second-order moment can be detected for beam sizes ≧420μm (circular) and ≧550μm (elliptical).

Phase noise mitigation of QPSK signal utilizing phase-locked multiplexing of signal harmonics and amplitude saturation.

PubMed

Mohajerin-Ariaei, Amirhossein; Ziyadi, Morteza; Chitgarha, Mohammad Reza; Almaiman, Ahmed; Cao, Yinwen; Shamee, Bishara; Yang, Jeng-Yuan; Akasaka, Youichi; Sekiya, Motoyoshi; Takasaka, Shigehiro; Sugizaki, Ryuichi; Touch, Joseph D; Tur, Moshe; Langrock, Carsten; Fejer, Martin M; Willner, Alan E

2015-07-15

We demonstrate an all-optical phase noise mitigation scheme based on the generation, delay, and coherent summation of higher order signal harmonics. The signal, its third-order harmonic, and their corresponding delayed variant conjugates create a staircase phase-transfer function that quantizes the phase of quadrature-phase-shift-keying (QPSK) signal to mitigate phase noise. The signal and the harmonics are automatically phase-locked multiplexed, avoiding the need for phase-based feedback loop and injection locking to maintain coherency. The residual phase noise converts to amplitude noise in the quantizer stage, which is suppressed by parametric amplification in the saturation regime. Phase noise reduction of ∼40% and OSNR-gain of ∼3  dB at BER 10(-3) are experimentally demonstrated for 20- and 30-Gbaud QPSK input signals.

Implosion-driven technique to create fast shockwaves in high-density gas

NASA Astrophysics Data System (ADS)

Serge, Matthew; Loiseau, Jason; Huneault, Justin; Szirti, Daniel; Higgins, Andrew; Tanguay, Vincent

2012-03-01

Pressurized tubes surrounded by either one or two layers (separated by a secondary tube) of sensitized nitromethane and encased in a thick-walled tube (the tamper) were imploded. The distance between the detonation wave in the explosive and shock wave in the innermost tube were measured (the standoff). A simple model based on hoop stress and acoustic interactions between the tubing was developed and used to predict the standoff distance. At low initial pressures (on the order of 7MPa), results indicate that the secondary tube and two layers of explosive did not prove to significantly increase the standoff. However, at higher pressures (on the order of 10 MPa), standoff was noticeably greater when the secondary tube was inserted between the pressurized tube and the tamper. The measured values are in reasonable agreement with the predictions of the model.

The business case for patient safety.

PubMed

Hwang, Raymond W; Herndon, James H

2007-04-01

Recent trends have focused attention on improving patient safety in the United States healthcare system. Lapses in patient safety create undue, often preventable, morbidity. These include adverse drug events, adverse surgical events and nosocomial infections. From an organizational perspective, these events are both inefficient and expensive. Many safe practices and quality enhancing improvements, such as computer provider order entry, proper infection surveillance, telemedicine intensive care, and registered nurse staffing are in fact cost-effective. However, in order to fully achieve higher quality, better adverse event reporting and a culture of safety must first be developed. Increased provider recognition, models of success, public awareness and consumer demand are propelling improvements. As we will outline in this review of the current literature, the business case for patient safety is a compelling one, offering substantial economic incentives for achieving the necessary goal of improved patient outcomes.

Ordering Chaos: Eva Miller--Multnomah County Library, Portland, OR

ERIC Educational Resources Information Center

Library Journal, 2004

2004-01-01

Eva Miller has a knack for creating order out of disorder. She single-handedly brought Oregon's virtual reference service, Answerland, live in just under 90 days, says Rivkah Sass, now director of the Omaha Public Library. Miller created its web site, designed the graphics, developed marketing materials, and recruited and trained librarians--all…

To be at the right place at the right time

PubMed Central

2011-01-01

Aim To analyze the hypothesis of events or neighborhood interactions that is based upon recognizable structures of systems which possess a surface in a four dimensional space - time constellation {x, y, z, t}. To include the theory of hierarchic order of structures and aspects of thermodynamically open systems, especially entropy, structural entropy and entropy flow. Hypothesis Any structure is a space - time constellation that occupies a unique space in its environment. The environment can be a system too, and is assumed to be (nearly) constant. Structures can interact in their environment and create a new structure at a higher order level. Interacting structures that create a surface are called a system. Starting from the bottom, such a system is characterized by its inner structures, its surface function, and its neighborhood. Interaction with a neighboring system is called an event. An event can alter a system, create new systems or induce the decay of a system, dependent upon the surrounding lower level system (background). Results The hypothesis results in a uniform theory about matter, life, diseases, or behavior. Concrete applications permit the estimation of duration of life in man, for example the effect of solid cancer in man, or appearance of protozoans in sexual or asexual reduplication. In addition, it can successfully describe the development of the universe (small exceed of matter above antimatter at the big bang), or the increase of structures (and systems) with increasing time (development of intelligent systems). The three dimensional space possesses the lowest number of mandatory dimensions to implement such a system. PMID:21781323

To be at the right place at the right time.

PubMed

Kayser, Klaus; Borkenfeld, Stephan; Goldmann, Torsten; Kayser, Gian

2011-07-22

To analyze the hypothesis of events or neighborhood interactions that is based upon recognizable structures of systems which possess a surface in a four dimensional space-time constellation {x, y, z, t}. To include the theory of hierarchic order of structures and aspects of thermodynamically open systems, especially entropy, structural entropy and entropy flow. Any structure is a space-time constellation that occupies a unique space in its environment. The environment can be a system too, and is assumed to be (nearly) constant. Structures can interact in their environment and create a new structure at a higher order level. Interacting structures that create a surface are called a system. Starting from the bottom, such a system is characterized by its inner structures, its surface function, and its neighborhood. Interaction with a neighboring system is called an event. An event can alter a system, create new systems or induce the decay of a system, dependent upon the surrounding lower level system (background). The hypothesis results in a uniform theory about matter, life, diseases, or behavior. Concrete applications permit the estimation of duration of life in man, for example the effect of solid cancer in man, or appearance of protozoans in sexual or asexual reduplication. In addition, it can successfully describe the development of the universe (small exceed of matter above antimatter at the big bang), or the increase of structures (and systems) with increasing time (development of intelligent systems). The three dimensional space possesses the lowest number of mandatory dimensions to implement such a system.

Toward a Principled Sampling Theory for Quasi-Orders

PubMed Central

Ünlü, Ali; Schrepp, Martin

2016-01-01

Quasi-orders, that is, reflexive and transitive binary relations, have numerous applications. In educational theories, the dependencies of mastery among the problems of a test can be modeled by quasi-orders. Methods such as item tree or Boolean analysis that mine for quasi-orders in empirical data are sensitive to the underlying quasi-order structure. These data mining techniques have to be compared based on extensive simulation studies, with unbiased samples of randomly generated quasi-orders at their basis. In this paper, we develop techniques that can provide the required quasi-order samples. We introduce a discrete doubly inductive procedure for incrementally constructing the set of all quasi-orders on a finite item set. A randomization of this deterministic procedure allows us to generate representative samples of random quasi-orders. With an outer level inductive algorithm, we consider the uniform random extensions of the trace quasi-orders to higher dimension. This is combined with an inner level inductive algorithm to correct the extensions that violate the transitivity property. The inner level correction step entails sampling biases. We propose three algorithms for bias correction and investigate them in simulation. It is evident that, on even up to 50 items, the new algorithms create close to representative quasi-order samples within acceptable computing time. Hence, the principled approach is a significant improvement to existing methods that are used to draw quasi-orders uniformly at random but cannot cope with reasonably large item sets. PMID:27965601

Toward a Principled Sampling Theory for Quasi-Orders.

PubMed

Ünlü, Ali; Schrepp, Martin

2016-01-01

Quasi-orders, that is, reflexive and transitive binary relations, have numerous applications. In educational theories, the dependencies of mastery among the problems of a test can be modeled by quasi-orders. Methods such as item tree or Boolean analysis that mine for quasi-orders in empirical data are sensitive to the underlying quasi-order structure. These data mining techniques have to be compared based on extensive simulation studies, with unbiased samples of randomly generated quasi-orders at their basis. In this paper, we develop techniques that can provide the required quasi-order samples. We introduce a discrete doubly inductive procedure for incrementally constructing the set of all quasi-orders on a finite item set. A randomization of this deterministic procedure allows us to generate representative samples of random quasi-orders. With an outer level inductive algorithm, we consider the uniform random extensions of the trace quasi-orders to higher dimension. This is combined with an inner level inductive algorithm to correct the extensions that violate the transitivity property. The inner level correction step entails sampling biases. We propose three algorithms for bias correction and investigate them in simulation. It is evident that, on even up to 50 items, the new algorithms create close to representative quasi-order samples within acceptable computing time. Hence, the principled approach is a significant improvement to existing methods that are used to draw quasi-orders uniformly at random but cannot cope with reasonably large item sets.

Parameters Affecting the Mechanical Properties of Fly Ash-Based Geopolymer Binders – Experimental Results

NASA Astrophysics Data System (ADS)

Lăzărescu, A.; Szilagyi, H.; Ioani, A.; Baeră, C.

2018-06-01

As the demand for concrete and the needs to satisfy development of infrastructure facilities increase, it is essential to find alternatives to create environment-friendly concrete. The particular procedure of alkaline activation of fly ash - in which ash resulting from a power plant is combined with a specific alkaline activator in order to create a solid material, then dried at a certain temperature - opened new opportunities for this new material to get attention worldwide. In order to obtain a material with similar properties of ordinary Portland cement concrete and to obtain desirable compressive strengths, the parameters that affect this type of binders should be fully understood. The aim of this paper is to study the main parameters affecting the mechanical strength of the fly ash-based geopolymer paste and their interactions. Parameters such as molarity of sodium hydroxide (from 8M to 12M) and alkaline activators ratio (from 0,5 to 2,5) were analysed to observe how they affect the mechanical properties of the geopolymer paste. Experimental results show that the compressive strength of the fly ash-based geopolymer paste produced using Romanian local raw materials increases with the increase of the concentration of sodium hydroxide and higher ratios of Na2SiO3/NaOH solution.

Creating Higher Education Academic and Information Technology Resources in an International Context

ERIC Educational Resources Information Center

Baron, Josh; Willis, Jerry; Lee, Reba-Anna

2010-01-01

A number of contemporary factors have combined to create a situation that encourages and supports international collaboration among institutions of higher education. Factors such as the globalization of the economy, the increasingly international nature of higher education, and the development of an inexpensive and virtually worldwide system of…

The Effect of Surface Patterning on Corrosion Resistance of Biomedical Devices

NASA Astrophysics Data System (ADS)

Guo, Mengnan; Toloei, Alisina; Rotermund, Harm H.

2016-10-01

In this study, two styles of surface topographies have been created on stainless steel wires to test their corrosion resistance as simulated implanted biomedical devices. Grade 316 LVM stainless steel wire was initially polished to G1500 surface finish before treatment to produce the two different topographies: 1. Unidirectional roughness was created using SiC papers and 2. Various patterns were created with specific hole diameter and inter-hole spacing using focused ion beam (FIB). In order to simulate the environment of implanted biomedical devices, a three-electrode electrochemical cell with 0.9% (by mass) NaCl solution has been used to test the corrosion resistance of the samples by potentiodynamic polarization test method. SEM and EDS analyzed the appearance and chemical composition of different elements including oxygen on the surface. The potential of stable pitting, time related to the initiation of the stable pitting, and the highest corrosion current associated with stable pitting have been compared for samples with the two styles of topography. It was found that surfaces with patterns have a relatively higher pitting potential and it takes longer time to initiate stable pitting than the surface without any patterns.

Leveraging People-Related Maturity Issues for Achieving Higher Maturity and Capability Levels

NASA Astrophysics Data System (ADS)

Buglione, Luigi

During the past 20 years Maturity Models (MM) become a buzzword in the ICT world. Since the initial Crosby's idea in 1979, plenty of models have been created in the Software & Systems Engineering domains, addressing various perspectives. By analyzing the content of the Process Reference Models (PRM) in many of them, it can be noticed that people-related issues have little weight in the appraisals of the capabilities of organizations while in practice they are considered as significant contributors in traditional process and organizational performance appraisals, as stressed instead in well-known Performance Management models such as MBQA, EFQM and BSC. This paper proposes some ways for leveraging people-related maturity issues merging HR practices from several types of maturity models into the organizational Business Process Model (BPM) in order to achieve higher organizational maturity and capability levels.

Thermal ablation system using high intensity focused ultrasound (HIFU) and guided by MRI

NASA Astrophysics Data System (ADS)

Damianou, C.; Ioannides, K.; HadjiSavas, V.; Milonas, N.; Couppis, A.; Iosif, D.; Komodromos, M.; Vrionides, F.

2009-04-01

In this paper magnetic resonance imaging (MRI) is investigated for monitoring lesions created by high intensity focused ultrasound (HIFU) in kidney, liver and brain in vitro and in vivo. Spherically focused transducers of 4 cm diameter, focusing at 10 cm and operating at 1 and 4 MHz were used. An MRI compatible positioning device was developed in order to scan the HIFU transducer. The MRI compatibility of the system was successfully demonstrated in a clinical high-field MRI scanner. The ability of the positioning device to accurately move the transducer thus creating discrete and overlapping lesions in biological tissue was tested successfully. A simple, cost effective, portable positioning device has been developed which can be used in virtually any clinical MRI scanner since it can be sited on the scanner's table. The propagation of HIFU can use either a lateral or superior-inferior approach. Both T1-w FSE and T2-w FSE imaged successfully lesions in kidney and liver. T1-w FSE and T2-w FSE and FLAIR shows better anatomical details in brain than T1-w FSE, but with T1-w FSE the contrast between lesion and brain is higher for both thermal and bubbly lesion. With this system we were able to create large lesions (by producing overlapping lesions). The length of the lesions in vivo brain was much higher than the length in vitro, proving that the penetration in the in vitro brain is limited by reflection due to trapped bubbles in the blood vessels.

Synthesis and characterization of inorganic materials precipitated into polymeric and novel liquid crystalline systems

NASA Astrophysics Data System (ADS)

Lubeck, Christopher Ryan

The use of nanostructured, hybrid materials possesses great future potential. Many examples of nanostructured materials exist within nature, such as animal bone, animal teeth, and seashells. This research, inspired by nature, strove to mimic salient properties of natural materials, utilizing methods observed within nature to produce materials. Further, this research increased the functionality of the templates from "mere" template to functional participant. Different chemical methods to produce hybrid materials were employed within this research to achieve these goals. First, electro-osmosis was utilized to drive ions into a polymeric matrix to form hybrid inorganic polymer material, creating a material inspired by naturally occurring bone or seashell in which the inorganic component provides strength and the polymeric material decreases the brittleness of the combined hybrid material. Second, self-assembled amphiphiles, forming higher ordered structures, acted as a template for inorganic cadmium sulfide. Electronically active molecules based on ethylene oxide and aniline segments were synthesized to create interaction between the templating material and the resulting inorganic cadmium sulfide. The templating process utilized self-assembly to create the inorganic structure through the interaction of the amphiphiles with water. The use of self-assembly is itself inspired by nature. Self-assembled structures are observed within living cells as cell walls and cell membranes are created through hydrophilic and hydrophobic interactions. Finally, the mesostructured inorganic cadmium sulfide was itself utilized as a template to form mesostructured copper sulfide.

Multimode Directional Coupler for Utilization of Harmonic Frequencies from TWTAs

NASA Technical Reports Server (NTRS)

Simmons, Rainee N.; Wintucky, Edwin G.

2013-01-01

A novel waveguide multimode directional coupler (MDC) intended for the measurement and potential utilization of the second and higher order harmonic frequencies from high-power traveling wave tube amplifiers (TWTAs) has been successfully designed, fabricated, and tested. The design is based on the characteristic multiple propagation modes of the electrical and magnetic field components of electromagnetic waves in a rectangular waveguide. The purpose was to create a rugged, easily constructed, more efficient waveguide- based MDC for extraction and exploitation of the second harmonic signal from the RF output of high-power TWTs used for space communications. The application would be a satellitebased beacon source needed for Qband and V/W-band atmospheric propagation studies. The MDC could function as a CW narrow-band source or as a wideband source for study of atmospheric group delay effects on highdata- rate links. The MDC is fabricated from two sections of waveguide - a primary one for the fundamental frequency and a secondary waveguide for the second harmonic - that are joined together such that the second harmonic higher order modes are selectively coupled via precision- machined slots for propagation in the secondary waveguide. In the TWTA output waveguide port, both the fundamental and the second harmonic signals are present. These signals propagate in the output waveguide as the dominant and higher order modes, respectively. By including an appropriate mode selective waveguide directional coupler, such as the MDC presented here at the output of the TWTA, the power at the second harmonic can be sampled and amplified to the power level needed for atmospheric propagation studies. The important conclusions from the preliminary test results for the multimode directional coupler are: (1) the second harmonic (Ka-band) can be measured and effectively separated from the fundamental (Ku-band) with no coupling of the latter, (2) power losses in the fundamental frequency are negligible, and (3) the power level of the extracted second harmonic is sufficient for further amplification to power levels needed for practical applications. It was also demonstrated that third order and potentially higher order harmonics are measurable with this device. The design is frequency agnostic, and with the appropriate choice of waveguides, is easily scaled to higher frequency TWTs. The MDC has the same function but with a number of important advantages over the conventional diplexer.

Pipelining Architecture of Indexing Using Agglomerative Clustering

NASA Astrophysics Data System (ADS)

Goyal, Deepika; Goyal, Deepti; Gupta, Parul

2010-11-01

The World Wide Web is an interlinked collection of billions of documents. Ironically the huge size of this collection has become an obstacle for information retrieval. To access the information from Internet, search engine is used. Search engine retrieve the pages from indexer. This paper introduce a novel pipelining technique for structuring the core index-building system that substantially reduces the index construction time and also clustering algorithm that aims at partitioning the set of documents into ordered clusters so that the documents within the same cluster are similar and are being assigned the closer document identifiers. After assigning to the clusters it creates the hierarchy of index so that searching is efficient. It will make the super cluster then mega cluster by itself. The pipeline architecture will create the index in such a way that it will be efficient in space and time saving manner. It will direct the search from higher level to lower level of index or higher level of clusters to lower level of cluster so that the user gets the possible match result in time saving manner. As one cluster is making by taking only two clusters so it search is limited to two clusters for lower level of index and so on. So it is efficient in time saving manner.

Creating a High-Skills Society during Recession: Issues for Policy Makers

ERIC Educational Resources Information Center

Panagiotakopoulos, Antonios

2015-01-01

The present study looks at the skill formation policies adopted by policy makers in Greece in order to create a high-skills society. It examines empirically the demand side of the skill creation process within 300 small enterprises in order to understand how far supply-side measures have influenced the demand for well-trained staff within small…

Activity-Based Costing in the After Press Services Industry

NASA Astrophysics Data System (ADS)

Shevasuthisilp, Suntichai; Punsathitwong, Kosum

2009-10-01

This research was conducted to apply activity-based costing (ABC) in an after press service company in Chiang Mai province, Thailand. The company produces all of its products by one-stop service (such as coating, stitching, binding, die cutting, and gluing). All products are made to order, and have different sizes and patterns. A strategy of low price is used to compete in the marketplace. After cost analysis, the study found that the company has high overhead (36.5% of total cost). The company's problem is its use of traditional cost accounting, which has low accuracy in assigning overhead costs. If management uses this information when pricing customer orders, losses may occur because real production costs may be higher than the selling price. Therefore, the application of ABC in cost analysis can help executives receive accurate cost information; establish a sound pricing strategy; and improve the manufacturing process by determining work activities which have excessively high production costs. According to this research, 6 out of 56 items had a production cost higher than the selling price, leading to losses of 123,923 baht per year. Methods used to solve this problem were: reducing production costs; establishing suitable prices; and creating a sales promotion with lower prices for customers whose orders include processes involving unused capacity. These actions will increase overall sales of the company, and allow more efficient use of its machinery.

Mover Position Detection for PMTLM Based on Linear Hall Sensors through EKF Processing

PubMed Central

Yan, Leyang; Zhang, Hui; Ye, Peiqing

2017-01-01

Accurate mover position is vital for a permanent magnet tubular linear motor (PMTLM) control system. In this paper, two linear Hall sensors are utilized to detect the mover position. However, Hall sensor signals contain third-order harmonics, creating errors in mover position detection. To filter out the third-order harmonics, a signal processing method based on the extended Kalman filter (EKF) is presented. The limitation of conventional processing method is first analyzed, and then EKF is adopted to detect the mover position. In the EKF model, the amplitude of the fundamental component and the percentage of the harmonic component are taken as state variables, and they can be estimated based solely on the measured sensor signals. Then, the harmonic component can be calculated and eliminated. The proposed method has the advantages of faster convergence, better stability and higher accuracy. Finally, experimental results validate the effectiveness and superiority of the proposed method. PMID:28383505

Tunable multipole resonances in plasmonic crystals made by four-beam holographic lithography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Y.; Li, X.; Zhang, X.

2016-02-01

Plasmonic nanostructures confine light to sub-wavelength scales, resulting in drastically enhanced light-matter interactions. Recent interest has focused on controlled symmetry breaking to create higher-order multipole plasmonic modes that store electromagnetic energy more efficiently than dipole modes. Here we demonstrate that four-beam holographic lithography enables fabrication of large-area plasmonic crystals with near-field coupled plasmons as well as deliberately broken symmetry to sustain multipole modes and Fano-resonances. Compared with the spectrally broad dipole modes we demonstrate an order of magnitude improved Q-factors (Q = 21) when the quadrupole mode is activated. We further demonstrate continuous tuning of the Fano-resonances using the polarization state ofmore » the incident light beam. The demonstrated technique opens possibilities to extend the rich physics of multipole plasmonic modes to wafer-scale applications that demand low-cost and high-throughput.« less

Mitochondrial genomes of parasitic flatworms.

PubMed

Le, Thanh H; Blair, David; McManus, Donald P

2002-05-01

Complete or near-complete mitochondrial genomes are now available for 11 species or strains of parasitic flatworms belonging to the Trematoda and the Cestoda. The organization of these genomes is not strikingly different from those of other eumetazoans, although one gene (atp8) commonly found in other phyla is absent from flatworms. The gene order in most flatworms has similarities to those seen in higher protostomes such as annelids. However, the gene order has been drastically altered in Schistosoma mansoni, which obscures this possible relationship. Among the sequenced taxa, base composition varies considerably, creating potential difficulties for phylogeny reconstruction. Long non-coding regions are present in all taxa, but these vary in length from only a few hundred to approximately 10000 nucleotides. Among Schistosoma spp., the long non-coding regions are rich in repeats and length variation among individuals is known. Data from mitochondrial genomes are valuable for studies on species identification, phylogenies and biogeography.

Analyzing task-based user study data to determine colormap efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashton, Zoe Charon Maria; Wendelberger, Joanne Roth; Ticknor, Lawrence O.

2015-07-23

Domain scientists need colormaps to visualize their data and are especially useful for identifying areas of interest, like in ocean data to identify eddies or characterize currents. However, traditional Rainbow colormap performs poorly for understanding details, because of the small perceptual range. In order to assist domain scientists in recognizing and identifying important details in their data, different colormaps need to be applied to allow higher perceptual definition. Visual artist Francesca Samsel used her understanding of color theory to create new colormaps to improve perception. While domain scientists find the new colormaps to be useful, we implemented a rigorous andmore » quantitative study to determine whether or not the new colormaps have perceptually more colors. Color count data from one of these studies will be analyzed in depth in order to determine whether or not the new colormaps have more perceivable colors and what affects the number of perceivable colors.« less

Motility-Induced Phase Separation

NASA Astrophysics Data System (ADS)

Cates, Michael E.; Tailleur, Julien

2015-03-01

Self-propelled particles include both self-phoretic synthetic colloids and various microorganisms. By continually consuming energy, they bypass the laws of equilibrium thermodynamics. These laws enforce the Boltzmann distribution in thermal equilibrium: The steady state is then independent of kinetic parameters. In contrast, self-propelled particles tend to accumulate where they move more slowly. They may also slow down at high density for either biochemical or steric reasons. This creates positive feedback, which can lead to motility-induced phase separation (MIPS) between dense and dilute fluid phases. At leading order in gradients, a mapping relates variable-speed, self-propelled particles to passive particles with attractions. This deep link to equilibrium phase separation is confirmed by simulations but generally breaks down at higher order in gradients: New effects, with no equilibrium counterpart, then emerge. We give a selective overview of the fast-developing field of MIPS, focusing on theory and simulation but including a brief speculative survey of its experimental implications.

Simulation of Planetary Formation using Python

NASA Astrophysics Data System (ADS)

Bufkin, James; Bixler, David

2015-03-01

A program to simulate planetary formation was developed in the Python programming language. The program consists of randomly placed and massed bodies surrounding a central massive object in order to approximate a protoplanetary disk. The orbits of these bodies are time-stepped, with accelerations, velocities and new positions calculated in each step. Bodies are allowed to merge if their disks intersect. Numerous parameters (orbital distance, masses, number of particles, etc.) were varied in order to optimize the program. The program uses an iterative difference equation approach to solve the equations of motion using a kinematic model. Conservation of energy and angular momentum are not specifically forced, but conservation of momentum is forced during the merging of bodies. The initial program was created in Visual Python (VPython) but the current intention is to allow for higher particle count and faster processing by utilizing PyOpenCl and PyOpenGl. Current results and progress will be reported.

Evolution of CMB spectral distortion anisotropies and tests of primordial non-Gaussianity

NASA Astrophysics Data System (ADS)

Chluba, Jens; Dimastrogiovanni, Emanuela; Amin, Mustafa A.; Kamionkowski, Marc

2017-04-01

Anisotropies in distortions to the frequency spectrum of the cosmic microwave background (CMB) can be created through spatially varying heating processes in the early Universe. For instance, the dissipation of small-scale acoustic modes does create distortion anisotropies, in particular for non-Gaussian primordial perturbations. In this work, we derive approximations that allow describing the associated distortion field. We provide a systematic formulation of the problem using Fourier-space window functions, clarifying and generalizing previous approximations. Our expressions highlight the fact that the amplitudes of the spectral-distortion fluctuations induced by non-Gaussianity depend also on the homogeneous value of those distortions. Absolute measurements are thus required to obtain model-independent distortion constraints on primordial non-Gaussianity. We also include a simple description for the evolution of distortions through photon diffusion, showing that these corrections can usually be neglected. Our formulation provides a systematic framework for computing higher order correlation functions of distortions with CMB temperature anisotropies and can be extended to describe correlations with polarization anisotropies.

Novel technologies for reverse osmosis concentrate treatment: a review.

PubMed

Joo, Sung Hee; Tansel, Berrin

2015-03-01

Global water shortages due to droughts and population growth have created increasing interest in water reuse and recycling and, concomitantly, development of effective water treatment processes. Pressured membrane processes, in particular reverse osmosis, have been adopted in water treatment industries and utilities despite the relatively high operational cost and energy consumption. However, emerging contaminants are present in reverse osmosis concentrate in higher concentrations than in the feed water, and have created challenges for treatment of the concentrate. Further, standards and guidelines for assessment and treatment of newly identified contaminants are currently lacking. Research is needed regarding the treatment and disposal of emerging contaminants of concern in reverse osmosis concentrate, in order to develop cost-effective methods for minimizing potential impacts on public health and the environment. This paper reviews treatment options for concentrate from membrane processes. Barriers to emerging treatment options are discussed and novel treatment processes are evaluated based on a literature review. Copyright © 2014 Elsevier Ltd. All rights reserved.

Blues for Elle - Microbial Bebop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, Peter

This musical composition was created from data of microbes - bacteria, algae and other microorganisms - sampled in the English Channel. (Above, the USS Winston S. Churchill traverses the English Channel.) Argonne National Laboratory biologist Peter Larsen created the songs as a unique way to present and comprehend large datasets. Some marine microbial taxa are most often present in the L4 Station community at very low abundance, but occasionally become highly dominant community members. To link these microbial blooms to relevant physical parameters, the chords in this composition are derived from changes in chlorophyll A concentrations and salinity. The melodymore » for each measure is derived from the relative abundances of typically rare taxa that were observed to occasionally bloom to higher abundance in the following order: Cyanobacteria, Vibrionales, Opitulates, Pseudomondales, Rhizobiales, Bacillales, Oceanospirallales, and Sphingomonadales. More information at http://www.anl.gov/articles/songs-key... Photo: USS Winston S. Churchill and Royal Navy HMS Cumberland transit the English Channel, courtesy U.S. Navy (http://www.flickr.com/photos/usnavy/5...)« less

Mapping higher-order relations between brain structure and function with embedded vector representations of connectomes.

PubMed

Rosenthal, Gideon; Váša, František; Griffa, Alessandra; Hagmann, Patric; Amico, Enrico; Goñi, Joaquín; Avidan, Galia; Sporns, Olaf

2018-06-05

Connectomics generates comprehensive maps of brain networks, represented as nodes and their pairwise connections. The functional roles of nodes are defined by their direct and indirect connectivity with the rest of the network. However, the network context is not directly accessible at the level of individual nodes. Similar problems in language processing have been addressed with algorithms such as word2vec that create embeddings of words and their relations in a meaningful low-dimensional vector space. Here we apply this approach to create embedded vector representations of brain networks or connectome embeddings (CE). CE can characterize correspondence relations among brain regions, and can be used to infer links that are lacking from the original structural diffusion imaging, e.g., inter-hemispheric homotopic connections. Moreover, we construct predictive deep models of functional and structural connectivity, and simulate network-wide lesion effects using the face processing system as our application domain. We suggest that CE offers a novel approach to revealing relations between connectome structure and function.

Visualization of chromatin domains created by the gypsy insulator of Drosophila.

PubMed

Byrd, Keith; Corces, Victor G

2003-08-18

Insulators might regulate gene expression by establishing and maintaining the organization of the chromatin fiber within the nucleus. Biochemical fractionation and in situ high salt extraction of lysed cells show that two known protein components of the gypsy insulator are present in the nuclear matrix. Using FISH with DNA probes located between two endogenous Su(Hw) binding sites, we show that the intervening DNA is arranged in a loop, with the two insulators located at the base. Mutations in insulator proteins, subjecting the cells to a brief heat shock, or destruction of the nuclear matrix lead to disruption of the loop. Insertion of an additional gypsy insulator in the center of the loop results in the formation of paired loops through the attachment of the inserted sequences to the nuclear matrix. These results suggest that the gypsy insulator might establish higher-order domains of chromatin structure and regulate nuclear organization by tethering the DNA to the nuclear matrix and creating chromatin loops.

Building validation tools for knowledge-based systems

NASA Technical Reports Server (NTRS)

Stachowitz, R. A.; Chang, C. L.; Stock, T. S.; Combs, J. B.

1987-01-01

The Expert Systems Validation Associate (EVA), a validation system under development at the Lockheed Artificial Intelligence Center for more than a year, provides a wide range of validation tools to check the correctness, consistency and completeness of a knowledge-based system. A declarative meta-language (higher-order language), is used to create a generic version of EVA to validate applications written in arbitrary expert system shells. The architecture and functionality of EVA are presented. The functionality includes Structure Check, Logic Check, Extended Structure Check (using semantic information), Extended Logic Check, Semantic Check, Omission Check, Rule Refinement, Control Check, Test Case Generation, Error Localization, and Behavior Verification.

Supersonic laminar-flow control

NASA Technical Reports Server (NTRS)

Bushnell, Dennis M.; Malik, Mujeeb R.

1987-01-01

Detailed, up to date systems studies of the application of laminar flow control (LFC) to various supersonic missions and/or vehicles, both civilian and military, are not yet available. However, various first order looks at the benefits are summarized. The bottom line is that laminar flow control may allow development of a viable second generation SST. This follows from a combination of reduced fuel, structure, and insulation weight permitting operation at higher altitudes, thereby lowering sonic boom along with improving performance. The long stage lengths associated with the emerging economic importance of the Pacific Basin are creating a serious and renewed requirement for such a vehicle. Supersonic LFC techniques are discussed.

Rapid prototyping of versatile atom chips for atom interferometry applications.

NASA Astrophysics Data System (ADS)

Kasch, Brian; Squires, Matthew; Olson, Spencer; Kroese, Bethany; Imhof, Eric; Kohn, Rudolph; Stuhl, Benjamin; Schramm, Stacy; Stickney, James

2016-05-01

We present recent advances in the manipulation of ultracold atoms with ex-vacuo atom chips (i.e. atom chips that are not inside to the UHV chamber). Details will be presented of an experimental system that allows direct bonded copper (DBC) atom chips to be removed and replaced in minutes, requiring minimal re-optimization of parameters. This system has been used to create Bose-Einstein condensates, as well as magnetic waveguides with precisely tunable axial parameters, allowing double wells, pure harmonic confinement, and modified harmonic traps. We investigate the effects of higher order magnetic field contributions to the waveguide, and the implications for confined atom interferometry.

Policy change and the politics of ideas: the emergence of the Canada/Quebec Pension Plans.

PubMed

Babich, Kristina; Béland, Daniel

2009-08-01

Stressing the direct impact of ideas on policy change, this article explores the adoption of the Canada and Quebec Pension Plans (C/QPP) in 1965 by addressing two closely related questions: in the mid-1960s: why did the federal government decide to create an earnings-related public pension system on top of the existing Old Age Security program? Second, why did that new system feature a replacement rate higher than initially proposed as well as a separate scheme for the province of Quebec? In order to answer these two questions, the article analyzes the debates leading to the enactment of the C/QPP.

A computational model of conditioning inspired by Drosophila olfactory system.

PubMed

Faghihi, Faramarz; Moustafa, Ahmed A; Heinrich, Ralf; Wörgötter, Florentin

2017-03-01

Recent studies have demonstrated that Drosophila melanogaster (briefly Drosophila) can successfully perform higher cognitive processes including second order olfactory conditioning. Understanding the neural mechanism of this behavior can help neuroscientists to unravel the principles of information processing in complex neural systems (e.g. the human brain) and to create efficient and robust robotic systems. In this work, we have developed a biologically-inspired spiking neural network which is able to execute both first and second order conditioning. Experimental studies demonstrated that volume signaling (e.g. by the gaseous transmitter nitric oxide) contributes to memory formation in vertebrates and invertebrates including insects. Based on the existing knowledge of odor encoding in Drosophila, the role of retrograde signaling in memory function, and the integration of synaptic and non-synaptic neural signaling, a neural system is implemented as Simulated fly. Simulated fly navigates in a two-dimensional environment in which it receives odors and electric shocks as sensory stimuli. The model suggests some experimental research on retrograde signaling to investigate neural mechanisms of conditioning in insects and other animals. Moreover, it illustrates a simple strategy to implement higher cognitive capabilities in machines including robots. Copyright © 2016 Elsevier Ltd. All rights reserved.

Wide field of view spectroscopy using Fabry-Perot Interferometers

NASA Astrophysics Data System (ADS)

Nikoleyczik, Jonathan

We present a high resolution spectrometer consisting of dual solid Fabry-Perot Interferometers (FPIs). This work is intended to be an all inclusive documentation of the instrument including discussion of the design of this instrument, the methods used in data reduction, and the analysis of these data. Each FPI is made of a single piece of L-BBH2 glass which has a high index of refraction n 2.07 with a thickness on the order of 100 mum. Each is then coated with partially reflective mirrors to create a resonant cavity and thus achieve a spectral resolution of R 30,000. Running the FPIs in tandem reduces the overlapping orders and allows for a much wider free spectral range and higher contrast. We will also discuss the properties of the FPIs which we have measured. This includes the tuning of the FPIs which is achieved by adjusting the temperature and thus changing the FPI gap and the refractive index of the material. The spectrometer then moves spatially in order to get spectral information at every point in the field of view. We select spectral lines for further analysis and create maps of the line depths across the field. Using this technique we are able to measure the fluorescence of chlorophyll in plants and attempt to observe zodiacal light. In the chlorophyll analysis we are able to detect chlorophyll fluorescence using the line depth in a plant using the sky as a reference solar spectrum. This instrument has possible applications in either a cubesat or aerial observations to measure bulk plant activity over large areas.

Local suppression of the hidden-order phase by impurities in URu2Si2

NASA Astrophysics Data System (ADS)

Pezzoli, Maria E.; Graf, Matthias J.; Haule, Kristjan; Kotliar, Gabriel; Balatsky, Alexander V.

2011-06-01

We consider the effects of impurities on the enigmatic hidden order (HO) state of the heavy-fermion material URu2Si2. In particular, we focus on local effects of Rh impurities as a tool to probe the suppression of the HO state. To study local properties, we introduce a lattice free energy, where the time invariant HO order parameter Ψ and local antiferromagnetic (AFM) order parameter M are competing orders. Near each Rh atom, the HO order parameter is suppressed, creating a hole in which local AFM order emerges as a result of competition. These local holes are created in the fabric of the HO state like in a Swiss cheese and “filled” with droplets of AFM order. We compare our analysis with recent NMR results on U(RhxRu1-x)2Si2 and find good agreement with the data.

Interministerial Order No. 6498/89 of 28 November 1989 creating renewable Financing Account attached to the Directorate of Waters and Forests and the Provincial Offices of Waters and Forests concerned with the project Management and Protection of Forests.

PubMed

1989-01-01

This Madagascar Order creates a Renewable Financing Account to finance the activities of the Management and Protection of Forests project. The Account is to pay the expenses of the project in sums set out in the Order for the various parts of the project. Further provisions of the Decree describe the duties of the manager of the Account.

Variations in the Solution of Linear First-Order Differential Equations. Classroom Notes

ERIC Educational Resources Information Center

Seaman, Brian; Osler, Thomas J.

2004-01-01

A special project which can be given to students of ordinary differential equations is described in detail. Students create new differential equations by changing the dependent variable in the familiar linear first-order equation (dv/dx)+p(x)v=q(x) by means of a substitution v=f(y). The student then creates a table of the new equations and…

Grating formation by a high power radio wave in near-equator ionosphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Rohtash; Sharma, A. K.; Tripathi, V. K.

2011-11-15

The formation of a volume grating in the near-equator regions of ionosphere due to a high power radio wave is investigated. The radio wave, launched from a ground based transmitter, forms a standing wave pattern below the critical layer, heating the electrons in a space periodic manner. The thermal conduction along the magnetic lines of force inhibits the rise in electron temperature, limiting the efficacy of heating to within a latitude of few degrees around the equator. The space periodic electron partial pressure leads to ambipolar diffusion creating a space periodic density ripple with wave vector along the vertical. Suchmore » a volume grating is effective to cause strong reflection of radio waves at a frequency one order of magnitude higher than the maximum plasma frequency in the ionosphere. Linearly mode converted plasma wave could scatter even higher frequency radio waves.« less

Creating a Minor in Applied Data Science: Case Western Reserve University Engages Business Leaders to Produce T-Shaped Professionals. A BHEF Case Study

ERIC Educational Resources Information Center

Business-Higher Education Forum, 2016

2016-01-01

This case study examines how Business-Higher Education Forum (BHEF) member Case Western Reserve University is integrating T-shaped skills into a minor in applied data science. Through the collaboration of its business and higher education members, BHEF launched the National Higher Education and Workforce Initiative to create new undergraduate…

Method and Apparatus for Creating a Topography at a Surface

DOEpatents

Adams, David P.; Sinclair, Michael B.; Mayer, Thomas M.; Vasile, Michael J.; Sweatt, William C.

2008-11-11

Methods and apparatus whereby an optical interferometer is utilized to monitor and provide feedback control to an integrated energetic particle column, to create desired topographies, including the depth, shape and/or roughness of features, at a surface of a specimen. Energetic particle columns can direct energetic species including, ions, photons and/or neutral particles to a surface to create features having in-plane dimensions on the order of 1 micron, and a height or depth on the order of 1 nanometer. Energetic processes can include subtractive processes such as sputtering, ablation, focused ion beam milling and, additive processes, such as energetic beam induced chemical vapor deposition. The integration of interferometric methods with processing by energetic species offers the ability to create desired topographies at surfaces, including planar and curved shapes.

Efficient quantum computing using coherent photon conversion.

PubMed

Langford, N K; Ramelow, S; Prevedel, R; Munro, W J; Milburn, G J; Zeilinger, A

2011-10-12

Single photons are excellent quantum information carriers: they were used in the earliest demonstrations of entanglement and in the production of the highest-quality entanglement reported so far. However, current schemes for preparing, processing and measuring them are inefficient. For example, down-conversion provides heralded, but randomly timed, single photons, and linear optics gates are inherently probabilistic. Here we introduce a deterministic process--coherent photon conversion (CPC)--that provides a new way to generate and process complex, multiquanta states for photonic quantum information applications. The technique uses classically pumped nonlinearities to induce coherent oscillations between orthogonal states of multiple quantum excitations. One example of CPC, based on a pumped four-wave-mixing interaction, is shown to yield a single, versatile process that provides a full set of photonic quantum processing tools. This set satisfies the DiVincenzo criteria for a scalable quantum computing architecture, including deterministic multiqubit entanglement gates (based on a novel form of photon-photon interaction), high-quality heralded single- and multiphoton states free from higher-order imperfections, and robust, high-efficiency detection. It can also be used to produce heralded multiphoton entanglement, create optically switchable quantum circuits and implement an improved form of down-conversion with reduced higher-order effects. Such tools are valuable building blocks for many quantum-enabled technologies. Finally, using photonic crystal fibres we experimentally demonstrate quantum correlations arising from a four-colour nonlinear process suitable for CPC and use these measurements to study the feasibility of reaching the deterministic regime with current technology. Our scheme, which is based on interacting bosonic fields, is not restricted to optical systems but could also be implemented in optomechanical, electromechanical and superconducting systems with extremely strong intrinsic nonlinearities. Furthermore, exploiting higher-order nonlinearities with multiple pump fields yields a mechanism for multiparty mediation of the complex, coherent dynamics.

Investing in High School

ERIC Educational Resources Information Center

Green, Daniel G.

2012-01-01

Strapped for cash, a Massachusetts high school creates its own venture capital fund to incentivize teachers to create programs that improve student learning. The result has been higher test scores and higher job satisfaction. One important program is credited with helping close the achievement gap at the school, while others have helped ambitious…

Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces for Neuroprostheses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupte, Kimaya; Tolosa, Vanessa

Implantable peripheral nerve cuffs have a large application in neuroprostheses as they can be used to restore sensation to those with upper limb amputations. Modern day prosthetics, while lessening the pain associated with phantom limb syndrome, have limited fine motor control and do not provide sensory feedback to patients. Sensory feedback with prosthetics requires communication between the nervous system and limbs, and is still a challenge to accomplish with amputees. Establishing this communication between the peripheral nerves in the arm and artificial limbs is vital as prosthetics research aims to provide sensory feedback to amputees. Peripheral nerve cuffs restore sensationmore » by electrically stimulating certain parts of the nerve in order to create feeling in the hand. Cuff electrodes have an advantage over standard electrodes as they have high selective stimulation by bringing the electrical interface close to the neural tissue in order to selectively activate targeted regions of a peripheral nerve. In order to further improve the selective stimulation of these nerve cuffs, there is need for finer spatial resolution among electrodes. One method to achieve a higher spatial resolution is to increase the electrode density on the cuff itself. Microfabrication techniques can be used to achieve this higher electrode density. Using L-Edit, a layout editor, microfabricated peripheral nerve cuffs were designed with a higher electrode density than the current model. This increase in electrode density translates to an increase in spatial resolution by at least one order of magnitude. Microfabricated devices also have two separate components that are necessary to understand before implantation: lifetime of the device and assembly to prevent nerve damage. Silicone molding procedures were optimized so that devices do not damage nerves in vivo, and lifetime testing was performed on test microfabricated devices to determine their lifetime in vivo. Future work of this project would include fabricating some of the designed devices and seeing how they compare to the current cuffs in terms of their electrical performance, lifetime, shape, and mechanical properties.« less

3 CFR 13556 - Executive Order 13556 of November 4, 2010. Controlled Unclassified Information

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Controlled Unclassified Information 13556 Order 13556 Presidential Documents Executive Orders Executive Order... information, such as information that involves privacy, security, proprietary business interests, and law... safeguarding of documents, led to unclear or unnecessarily restrictive dissemination policies, and created...

Importance-satisfaction analysis of street food sanitation and choice factor in Korea and Taiwan.

PubMed

Joo, Nami; Park, Sanghyun; Lee, Bohee; Yoon, Jiyoung

2015-06-01

The present study investigated Korean and Taiwan adults on the importance of and the satisfaction with street food sanitation and street food choice factor, in order to present management and improvement measures for street foods. The present study conducted a survey on 400 randomly chosen adults (200 Korean, 200 Taiwanese). General characteristics, eating habits, street food intake frequency, and preference by type of street food of respondents were checked. Respondents' importance and satisfaction of street food hygiene and selection attributes were also measured. In order to test for the difference between groups, χ(2)-test and t-test were performed. ISA was also performed to analyze importance and satisfaction. Results showed that the importance of sanitation was significantly higher than satisfaction on all items in both Korea and Taiwan, and the satisfaction with sanitation was higher in Taiwan than in Korea. According to ISA results with street food sanitation, satisfaction was low while importance was high in both Korea and Taiwan. In terms of street food choice factor, importance scores were significantly higher than satisfaction scores on all items. In addition, satisfaction scores on all items except 'taste' were significantly higher in Taiwan than in Korea. A manual on sanitation management of street foods should be developed to change the knowledge and attitude toward sanitation by putting into practice a regularly conducted education. Considering the popularity of street foods and its potential as a tourism resource to easily publicize our food culture, thorough management measures should be prepared on sanitation so that safe street food culture should be created.

Tourist-Centric Citizen Science in Denali National Park and Preserve

ERIC Educational Resources Information Center

Fischer, Heather A.

2017-01-01

Citizen Science programs create a bi-directional flow of knowledge between scientists and citizen volunteers; this flow democratizes science in order to create an informed public (Bonney et al. 2014; Brown, Kelly, and Whitall 2014). This democratization is a fundamental part of creating a science that can address today's pressing environmental,…

Optimizing preoperative blood ordering with data acquired from an anesthesia information management system.

PubMed

Frank, Steven M; Rothschild, James A; Masear, Courtney G; Rivers, Richard J; Merritt, William T; Savage, Will J; Ness, Paul M

2013-06-01

The maximum surgical blood order schedule (MSBOS) is used to determine preoperative blood orders for specific surgical procedures. Because the list was developed in the late 1970s, many new surgical procedures have been introduced and others improved upon, making the original MSBOS obsolete. The authors describe methods to create an updated, institution-specific MSBOS to guide preoperative blood ordering. Blood utilization data for 53,526 patients undergoing 1,632 different surgical procedures were gathered from an anesthesia information management system. A novel algorithm based on previously defined criteria was used to create an MSBOS for each surgical specialty. The economic implications were calculated based on the number of blood orders placed, but not indicated, according to the MSBOS. Among 27,825 surgical cases that did not require preoperative blood orders as determined by the MSBOS, 9,099 (32.7%) had a type and screen, and 2,643 (9.5%) had a crossmatch ordered. Of 4,644 cases determined to require only a type and screen, 1,509 (32.5%) had a type and crossmatch ordered. By using the MSBOS to eliminate unnecessary blood orders, the authors calculated a potential reduction in hospital charges and actual costs of $211,448 and $43,135 per year, respectively, or $8.89 and $1.81 per surgical patient, respectively. An institution-specific MSBOS can be created, using blood utilization data extracted from an anesthesia information management system along with our proposed algorithm. Using these methods to optimize the process of preoperative blood ordering can potentially improve operating room efficiency, increase patient safety, and decrease costs.

A hole inversion layer at the BiVO4/Bi4V2O11 interface produces a high tunable photovoltage for water splitting

NASA Astrophysics Data System (ADS)

Dos Santos, Wayler S.; Rodriguez, Mariandry; Afonso, André S.; Mesquita, João P.; Nascimento, Lucas L.; Patrocínio, Antônio O. T.; Silva, Adilson C.; Oliveira, Luiz C. A.; Fabris, José D.; Pereira, Márcio C.

2016-08-01

The conversion of solar energy into hydrogen fuel by splitting water into photoelectrochemical cells (PEC) is an appealing strategy to store energy and minimize the extensive use of fossil fuels. The key requirement for efficient water splitting is producing a large band bending (photovoltage) at the semiconductor to improve the separation of the photogenerated charge carriers. Therefore, an attractive method consists in creating internal electrical fields inside the PEC to render more favorable band bending for water splitting. Coupling ferroelectric materials exhibiting spontaneous polarization with visible light photoactive semiconductors can be a likely approach to getting higher photovoltage outputs. The spontaneous electric polarization tends to promote the desirable separation of photogenerated electron- hole pairs and can produce photovoltages higher than that obtained from a conventional p-n heterojunction. Herein, we demonstrate that a hole inversion layer induced by a ferroelectric Bi4V2O11 perovskite at the n-type BiVO4 interface creates a virtual p-n junction with high photovoltage, which is suitable for water splitting. The photovoltage output can be boosted by changing the polarization by doping the ferroelectric material with tungsten in order to produce the relatively large photovoltage of 1.39 V, decreasing the surface recombination and enhancing the photocurrent as much as 180%.

A hole inversion layer at the BiVO4/Bi4V2O11 interface produces a high tunable photovoltage for water splitting

PubMed Central

dos Santos, Wayler S.; Rodriguez, Mariandry; Afonso, André S.; Mesquita, João P.; Nascimento, Lucas L.; Patrocínio, Antônio O. T.; Silva, Adilson C.; Oliveira, Luiz C. A.; Fabris, José D.; Pereira, Márcio C.

2016-01-01

The conversion of solar energy into hydrogen fuel by splitting water into photoelectrochemical cells (PEC) is an appealing strategy to store energy and minimize the extensive use of fossil fuels. The key requirement for efficient water splitting is producing a large band bending (photovoltage) at the semiconductor to improve the separation of the photogenerated charge carriers. Therefore, an attractive method consists in creating internal electrical fields inside the PEC to render more favorable band bending for water splitting. Coupling ferroelectric materials exhibiting spontaneous polarization with visible light photoactive semiconductors can be a likely approach to getting higher photovoltage outputs. The spontaneous electric polarization tends to promote the desirable separation of photogenerated electron- hole pairs and can produce photovoltages higher than that obtained from a conventional p-n heterojunction. Herein, we demonstrate that a hole inversion layer induced by a ferroelectric Bi4V2O11 perovskite at the n-type BiVO4 interface creates a virtual p-n junction with high photovoltage, which is suitable for water splitting. The photovoltage output can be boosted by changing the polarization by doping the ferroelectric material with tungsten in order to produce the relatively large photovoltage of 1.39 V, decreasing the surface recombination and enhancing the photocurrent as much as 180%. PMID:27503274

Natural polymer-stabilized multiple water-in-oil-in-water emulsions: a novel dermal drug delivery system for 5-fluorouracil.

PubMed

Hoppel, Magdalena; Mahrhauser, Denise; Stallinger, Christina; Wagner, Florian; Wirth, Michael; Valenta, Claudia

2014-05-01

The aim of this study was to create multiple water-in-oil-in-water (W/O/W) emulsions with an increased long-term stability as skin delivery systems for the hydrophilic model drug 5-fluorouracil. Multiple W/O/W emulsions were prepared in a one-step emulsification process, and were characterized regarding particle size, microstructure and viscosity. In-vitro studies on porcine skin with Franz-type diffusion cells, tape stripping experiments and attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) were performed. The addition of Solagum AX, a natural polymer mixture of acacia and xanthan gum, led to multiple W/O/W emulsions with a remarkably increased long-term stability in comparison to formulations without a thickener. The higher skin diffusion of 5-fluorouracil from the multiple emulsions compared with an O/W-macroemulsion could be explained by ATR-FTIR. Shifts to higher wave numbers and increase of peak areas of the asymmetric and symmetric CH2 stretching vibrations confirmed a transition of parts of the skin lipids from an ordered to a disordered state after impregnation of porcine skin with the multiple emulsions. Solagum AX is highly suitable for stabilization of the created multiple emulsions. Moreover, these formulations showed superiority over a simple O/W-macroemulsion regarding skin permeation and penetration of 5-fluorouracil. © 2013 Royal Pharmaceutical Society.

Millisecond newly born pulsars as efficient accelerators of electrons

NASA Astrophysics Data System (ADS)

Osmanov, Zaza; Mahajan, Swadesh; Machabeli, George; Chkheidze, Nino

2015-09-01

The newly born millisecond pulsars are investigated as possible energy sources for creating ultra-high energy electrons. The transfer of energy from the star rotation to high energy electrons takes place through the Landau damping of centrifugally driven (via a two stream instability) electrostatic Langmuir waves. Generated in the bulk magnetosphere plasma, such waves grow to high amplitudes, and then damp, very effectively, on relativistic electrons driving them to even higher energies. We show that the rate of transfer of energy is so efficient that no energy losses might affect the mechanism of particle acceleration; the electrons might achieve energies of the order of 1018 eV for parameters characteristic of a young star.

Bacterial chemoreceptors: high-performance signaling in networked arrays.

PubMed

Hazelbauer, Gerald L; Falke, Joseph J; Parkinson, John S

2008-01-01

Chemoreceptors are crucial components in the bacterial sensory systems that mediate chemotaxis. Chemotactic responses exhibit exquisite sensitivity, extensive dynamic range and precise adaptation. The mechanisms that mediate these high-performance functions involve not only actions of individual proteins but also interactions among clusters of components, localized in extensive patches of thousands of molecules. Recently, these patches have been imaged in native cells, important features of chemoreceptor structure and on-off switching have been identified, and new insights have been gained into the structural basis and functional consequences of higher order interactions among sensory components. These new data suggest multiple levels of molecular interactions, each of which contribute specific functional features and together create a sophisticated signaling device.

Bacterial chemoreceptors: high-performance signaling in networked arrays

PubMed Central

Hazelbauer, Gerald L.; Falke, Joseph J.; Parkinson, John S.

2010-01-01

Chemoreceptors are crucial components in the bacterial sensory systems that mediate chemotaxis. Chemotactic responses exhibit exquisite sensitivity, extensive dynamic range and precise adaptation. The mechanisms that mediate these high-performance functions involve not only actions of individual proteins but also interactions among clusters of components, localized in extensive patches of thousands of molecules. Recently, these patches have been imaged in native cells, important features of chemoreceptor structure and on–off switching have been identified, and new insights have been gained into the structural basis and functional consequences of higher order interactions among sensory components. These new data suggest multiple levels of molecular interactions, each of which contribute specific functional features and together create a sophisticated signaling device. PMID:18165013

A C++11 implementation of arbitrary-rank tensors for high-performance computing

NASA Astrophysics Data System (ADS)

Aragón, Alejandro M.

2014-06-01

This article discusses an efficient implementation of tensors of arbitrary rank by using some of the idioms introduced by the recently published C++ ISO Standard (C++11). With the aims at providing a basic building block for high-performance computing, a single Array class template is carefully crafted, from which vectors, matrices, and even higher-order tensors can be created. An expression template facility is also built around the array class template to provide convenient mathematical syntax. As a result, by using templates, an extra high-level layer is added to the C++ language when dealing with algebraic objects and their operations, without compromising performance. The implementation is tested running on both CPU and GPU.

A C++11 implementation of arbitrary-rank tensors for high-performance computing

NASA Astrophysics Data System (ADS)

Aragón, Alejandro M.

2014-11-01

This article discusses an efficient implementation of tensors of arbitrary rank by using some of the idioms introduced by the recently published C++ ISO Standard (C++11). With the aims at providing a basic building block for high-performance computing, a single Array class template is carefully crafted, from which vectors, matrices, and even higher-order tensors can be created. An expression template facility is also built around the array class template to provide convenient mathematical syntax. As a result, by using templates, an extra high-level layer is added to the C++ language when dealing with algebraic objects and their operations, without compromising performance. The implementation is tested running on both CPU and GPU.

Generation of ultrasound in materials using continuous-wave lasers.

PubMed

Caron, James N; DiComo, Gregory P; Nikitin, Sergei

2012-03-01

Generating and detecting ultrasound is a standard method of nondestructive evaluation of materials. Pulsed lasers are used to generate ultrasound remotely in situations that prohibit the use of contact transducers. The scanning rate is limited by the repetition rates of the pulsed lasers, ranging between 10 and 100 Hz for lasers with sufficient pulse widths and energies. Alternately, a high-power continuous-wave laser can be scanned across the surface, creating an ultrasonic wavefront. Since generation is continuous, the scanning rate can be as much as 4 orders of magnitude higher than with pulsed lasers. This paper introduces the concept, comparing the theoretical scanning speed with generation by pulsed laser. © 2012 Optical Society of America

Use of Windbreaks for Hurricane Protection of Critical Facilities

NASA Technical Reports Server (NTRS)

Hyater-Adams, Sinone; DeYoung, Russell J.

2012-01-01

The protection of NASA Langley Research Center from future hurricanes is important in order to allow the center to fulfill its mission. The impact of the center is not only great within NASA but the economy as well. The infrastructure of the Center is under potential risk in the future because of more intense hurricanes with higher speed winds and flooding. A potential method of protecting the Center s facilities is the placement of a windbreak barrier composed of indigenous trees. The New Town program that is now in progress creates a more condensed area of focus for protection. A potential design for an efficient tree windbreak barrier for Langley Research center is proposed.

Generation of Synthetic Spike Trains with Defined Pairwise Correlations

PubMed Central

Niebur, Ernst

2008-01-01

Recent technological advances as well as progress in theoretical understanding of neural systems have created a need for synthetic spike trains with controlled mean rate and pairwise cross-correlation. This report introduces and analyzes a novel algorithm for the generation of discretized spike trains with arbitrary mean rates and controlled cross correlation. Pairs of spike trains with any pairwise correlation can be generated, and higher-order correlations are compatible with common synaptic input. Relations between allowable mean rates and correlations within a population are discussed. The algorithm is highly efficient, its complexity increasing linearly with the number of spike trains generated and therefore inversely with the number of cross-correlated pairs. PMID:17521277

[Marketing in health service--a necessity or a temporary whim?].

PubMed

Dworzański, Wojciech; Dworzańska, Anna; Niezabitowska, Ewa; Czerwonka, Maciej; Madej, Barbara; Burdan, Franciszek

2012-01-01

Permanent changes occurring in economy and politics, open borders, a greater number of people with higher education as well as growing social awareness concerning taking care of health are followed by changes in healthcare sector. In response to an increased social demand, new medical institutions are being founded. They offer their patients a vast array of services ranging from therapeutic to preventive and highly specialized procedures improving their standard of living. In order to attract regular patients, and therefore receive regular income, it is necessary to stabilize such institutions on services market. It can be achieved by numerous marketing tools which, when applied appropriately, enable to create a positive image of a medical institution.

76 FR 38206 - Public Land Order No. 7772; Partial Revocation of the Executive Order dated April 17, 1926; Idaho

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... (IDI-35073)] Public Land Order No. 7772; Partial Revocation of the Executive Order dated April 17, 1926; Idaho AGENCY: Bureau of Land Management, Interior. ACTION: Public Land Order. SUMMARY: This order partially revokes a withdrawal created by an Executive Order insofar as it affects 369.68 acres of public...

78 FR 28894 - Public Land Order No. 7814; Partial Revocation of Bureau of Reclamation Order Dated July 11, 1955...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... DEPARTMENT OF THE INTERIOR Bureau of Land Management [NEW 149341 and NEW 179095] Public Land Order No. 7814; Partial Revocation of Bureau of Reclamation Order Dated July 11, 1955, and Transfer of... Land Order. SUMMARY: This order revokes in-part a withdrawal created by a Bureau of Reclamation Order...

Adaptive Optics Analysis of Visual Benefit with Higher-order Aberrations Correction of Human Eye - Poster Paper

NASA Astrophysics Data System (ADS)

Xue, Lixia; Dai, Yun; Rao, Xuejun; Wang, Cheng; Hu, Yiyun; Liu, Qian; Jiang, Wenhan

2008-01-01

Higher-order aberrations correction can improve visual performance of human eye to some extent. To evaluate how much visual benefit can be obtained with higher-order aberrations correction we developed an adaptive optics vision simulator (AOVS). Dynamic real time optimized modal compensation was used to implement various customized higher-order ocular aberrations correction strategies. The experimental results indicate that higher-order aberrations correction can improve visual performance of human eye comparing with only lower-order aberration correction but the improvement degree and higher-order aberration correction strategy are different from each individual. Some subjects can acquire great visual benefit when higher-order aberrations were corrected but some subjects acquire little visual benefit even though all higher-order aberrations were corrected. Therefore, relative to general lower-order aberrations correction strategy, customized higher-order aberrations correction strategy is needed to obtain optimal visual improvement for each individual. AOVS provides an effective tool for higher-order ocular aberrations optometry for customized ocular aberrations correction.

Creating Partnerships for a Better Tennessee. Master Plan, 2005-2010

ERIC Educational Resources Information Center

Tennessee Higher Education Commission, 2010

2010-01-01

The Tennessee Higher Education Commission is statutorily charged to develop a statewide master plan for the future development of public higher education. In response to this, the Master Plan, "Creating Partnerships for a Better Tennessee," was developed for 2005-2010. The Master Plan is a collaborative effort with the Tennessee Board of…

Exploring Metaskills of Knowledge-Creating Inquiry in Higher Education

ERIC Educational Resources Information Center

Muukkonen, Hanni; Lakkala, Minna

2009-01-01

The skills of knowledge-creating inquiry are explored as a challenge for higher education. The knowledge-creation approach to learning provides a theoretical tool for addressing them: In addition to the individual and social aspects in regulation of inquiry, the knowledge-creation approach focuses on aspects related to advancing shared objects of…

Higher Education Technology and Research: Creating Excellence through State Investments

ERIC Educational Resources Information Center

New Jersey Commission on Higher Education, 2004

2004-01-01

Colleges and universities in New Jersey play a critical role in building and sustaining economic prosperity and quality of life in the state and beyond. Through advancements in technology and research, higher education helps to create new jobs, improve the workforce, develop new knowledge, and boost the overall economy. This report summarizes…

Practice Variation and Effects of E-mail-only Performance Feedback on Resource Use in the Emergency Department.

PubMed

Tavarez, Melissa M; Ayers, Brandon; Jeong, Jong H; Coombs, Carmen M; Thompson, Ann; Hickey, Robert W

2017-08-01

Higher resource utilization in the management of pediatric patients with undifferentiated vomiting and/or diarrhea does not correlate consistently with improved outcomes or quality of care. Performance feedback has been shown to change physician practice behavior and may be a mechanism to minimize practice variation. We aimed to evaluate the effects of e-mail-only, provider-level performance feedback on the ordering and admission practice variation of pediatric emergency physicians for patients presenting with undifferentiated vomiting and/or diarrhea. We conducted a prospective, quality improvement intervention and collected data over 3 consecutive fiscal years. The setting was a single, tertiary care pediatric emergency department. We collected admission and ordering practices data on 19 physicians during baseline, intervention, and postintervention periods. We provided physicians with quarterly e-mail-based performance reports during the intervention phase. We measured admission rate and created four categories for ordering practices: no orders, laboratory orders, pharmacy orders, and radiology orders. There was wide (two- to threefold) practice variation among physicians. Admission rates ranged from 15% to 30%, laboratory orders from 19% to 43%, pharmacy orders from 29% to 57%, and radiology orders from 11% to 30%. There was no statistically significant difference in the proportion of patients admitted or with radiology or pharmacy orders placed between preintervention, intervention, or postintervention periods (p = 0.58, p = 0.19, and p = 0.75, respectively). There was a significant but very small decrease in laboratory orders between the preintervention and postintervention periods. Performance feedback provided only via e-mail to pediatric emergency physicians on a quarterly basis does not seem to significantly impact management practices for patients with undifferentiated vomiting and/or diarrhea. © 2017 by the Society for Academic Emergency Medicine.

Changing Dielectrics into Multiferroics---Alchemy Enabled by Strain

NASA Astrophysics Data System (ADS)

Schlom, Darrell

2011-03-01

Ferroelectric ferromagnets are exceedingly rare, fundamentally interesting multiferroic materials. The properties of what few compounds simultaneously exhibit these phenomena pale in comparison to useful ferroelectrics or ferromagnets: their spontaneous polarizations (Ps) or magnetizations (Ms) are smaller by a factor of 1000 or more. The same holds for (magnetic or electric) field-induced multiferroics. Recently, however, Fennie and Rabe proposed a new route to ferroelectric ferromagnets---transforming magnetically ordered insulators that are neither ferroelectric nor ferromagnetic, of which there are many, into ferroelectric ferromagnets using a single control parameter: strain. The system targeted, EuTi O3 , was predicted to simultaneously exhibit strong ferromagnetism (Ms ~ ~ ~7~μB /Eu) and strong ferroelectricity (Ps ~ ~ ~10~ μ C/cm2) under large biaxial compressive strain. These values are orders of magnitude higher than any known ferroelectric ferromagnet and rival the best materials that are solely ferroelectric or ferromagnetic. Hindered by the absence of an appropriate substrate to provide the desired compression, we show 3 both experimentally and theoretically the emergence of a multiferroic state under biaxial tension with the unexpected benefit that even lower misfits are required, thereby enabling higher quality crystalline films. The resulting genesis of a strong ferromagnetic ferroelectric points the way to high temperature manifestations of this spin-phonon coupling mechanism. Our work demonstrates that a single experimental parameter, strain, simultaneously controls multiple order parameters and is a viable alternative tuning parameter to composition for creating multiferroics. C.J. Fennie and K.M. Rabe, Phys. Rev. Lett. 97 (2006) 267602.

Laser-driven electron beam acceleration and future application to compact light sources

NASA Astrophysics Data System (ADS)

Hafz, N.; Jeong, T. M.; Lee, S. K.; Pae, K. H.; Sung, J. H.; Choi, I. W.; Yu, T. J.; Jeong, Y. U.; Lee, J.

2009-07-01

Laser-driven plasma accelerators are gaining much attention by the advanced accelerator community due to the potential these accelerators hold in miniaturizing future high-energy and medium-energy machines. In the laser wakefield accelerator (LWFA), the ponderomotive force of an ultrashort high intensity laser pulse excites a longitudinal plasma wave or bubble. Due to huge charge separation, electric fields created in the plasma bubble can be several orders of magnitude higher than those available in conventional microwave and RF-based accelerator facilities which are limited (up to ˜100 MV/m) by material breakdown. Therefore, if an electron bunch is injected into the bubble in phase with its field, it will gain relativistic energies within an extremely short distance. Here, in the LWFA we show the generation of high-quality and high-energy electron beams up to the GeV-class within a few millimeters of gas-jet plasmas irradiated by tens of terawatt ultrashort laser pulses. Thus we realize approximately four orders of magnitude acceleration gradients higher than available by conventional technology. As a practical application of the stable high-energy electron beam generation, we are planning on injecting the electron beams into a few-meters long conventional undulator in order to realize compact X-ray synchrotron (immediate) and FEL (future) light sources. Stable laser-driven electron beam and radiation devices will surely open a new era in science, medicine and technology and will benefit a larger number of users in those fields.

Transitions between central and peripheral vision create spatial/temporal distortions: a hypothesis concerning the perceived break of the curveball.

PubMed

Shapiro, Arthur; Lu, Zhong-Lin; Huang, Chang-Bing; Knight, Emily; Ennis, Robert

2010-10-13

The human visual system does not treat all parts of an image equally: the central segments of an image, which fall on the fovea, are processed with a higher resolution than the segments that fall in the visual periphery. Even though the differences between foveal and peripheral resolution are large, these differences do not usually disrupt our perception of seamless visual space. Here we examine a motion stimulus in which the shift from foveal to peripheral viewing creates a dramatic spatial/temporal discontinuity. The stimulus consists of a descending disk (global motion) with an internal moving grating (local motion). When observers view the disk centrally, they perceive both global and local motion (i.e., observers see the disk's vertical descent and the internal spinning). When observers view the disk peripherally, the internal portion appears stationary, and the disk appears to descend at an angle. The angle of perceived descent increases as the observer views the stimulus from further in the periphery. We examine the first- and second-order information content in the display with the use of a three-dimensional Fourier analysis and show how our results can be used to describe perceived spatial/temporal discontinuities in real-world situations. The perceived shift of the disk's direction in the periphery is consistent with a model in which foveal processing separates first- and second-order motion information while peripheral processing integrates first- and second-order motion information. We argue that the perceived distortion may influence real-world visual observations. To this end, we present a hypothesis and analysis of the perception of the curveball and rising fastball in the sport of baseball. The curveball is a physically measurable phenomenon: the imbalance of forces created by the ball's spin causes the ball to deviate from a straight line and to follow a smooth parabolic path. However, the curveball is also a perceptual puzzle because batters often report that the flight of the ball undergoes a dramatic and nearly discontinuous shift in position as the ball nears home plate. We suggest that the perception of a discontinuous shift in position results from differences between foveal and peripheral processing.

Next generation of decision making software for nanopatterns characterization: application to semiconductor industry

NASA Astrophysics Data System (ADS)

Dervilllé, A.; Labrosse, A.; Zimmermann, Y.; Foucher, J.; Gronheid, R.; Boeckx, C.; Singh, A.; Leray, P.; Halder, S.

2016-03-01

The dimensional scaling in IC manufacturing strongly drives the demands on CD and defect metrology techniques and their measurement uncertainties. Defect review has become as important as CD metrology and both of them create a new metrology paradigm because it creates a completely new need for flexible, robust and scalable metrology software. Current, software architectures and metrology algorithms are performant but it must be pushed to another higher level in order to follow roadmap speed and requirements. For example: manage defect and CD in one step algorithm, customize algorithms and outputs features for each R&D team environment, provide software update every day or every week for R&D teams in order to explore easily various development strategies. The final goal is to avoid spending hours and days to manually tune algorithm to analyze metrology data and to allow R&D teams to stay focus on their expertise. The benefits are drastic costs reduction, more efficient R&D team and better process quality. In this paper, we propose a new generation of software platform and development infrastructure which can integrate specific metrology business modules. For example, we will show the integration of a chemistry module dedicated to electronics materials like Direct Self Assembly features. We will show a new generation of image analysis algorithms which are able to manage at the same time defect rates, images classifications, CD and roughness measurements with high throughput performances in order to be compatible with HVM. In a second part, we will assess the reliability, the customization of algorithm and the software platform capabilities to follow new specific semiconductor metrology software requirements: flexibility, robustness, high throughput and scalability. Finally, we will demonstrate how such environment has allowed a drastic reduction of data analysis cycle time.

Order Up

ERIC Educational Resources Information Center

Gibeault, Michael

2005-01-01

Change orders. The words can turn the stomachs of administrators. Horror stories about change orders create fear and distrust among school officials, designers and builders. Can change orders be avoided? If car manufacturers can produce millions of intricately designed vehicles, why can't the same quality control be achieved on a construction…

Identification of flexible structures by frequency-domain observability range context

NASA Astrophysics Data System (ADS)

Hopkins, M. A.

2013-04-01

The well known frequency-domain observability range space extraction (FORSE) algorithm provides a powerful multivariable system-identification tool with inherent flexibility, to create state-space models from frequency-response data (FRD). This paper presents a method of using FORSE to create "context models" of a lightly damped system, from which models of individual resonant modes can be extracted. Further, it shows how to combine the extracted models of many individual modes into one large state-space model. Using this method, the author has created very high-order state-space models that accurately match measured FRD over very broad bandwidths, i.e., resonant peaks spread across five orders-of-magnitude of frequency bandwidth.

Gel network shampoo formulation and hair health benefits.

PubMed

Marsh, J M; Brown, M A; Felts, T J; Hutton, H D; Vatter, M L; Whitaker, S; Wireko, F C; Styczynski, P B; Li, C; Henry, I D

2017-10-01

The objective of this work was to create a shampoo formula that contains a stable ordered gel network structure that delivers fatty alcohols inside hair. X-ray diffraction (SAXS and WAXS), SEM and DSC have been used to confirm formation of the ordered Lβ gel network with fatty alcohol (cetyl and stearyl alcohols) and an anionic surfactant (SLE1S). Micro-autoradiography and extraction methods using GC-MS were used to confirm penetration of fatty alcohols into hair, and cyclic fatigue testing was used to measure hair strength. In this work, evidence of a stable Lβ ordered gel network structure created from cetyl and stearyl alcohols and anionic surfactant (SLE1S) is presented, and this is confirmed via scanning electron microscopy images showing lamella layers and differential scanning calorimetry (DSC) showing new melting peaks vs the starting fatty alcohols. Hair washed for 16 repeat cycles with this shampoo showed penetration of fatty alcohols from the gel network into hair as confirmed by a differential extraction method with GC-MS and by radiolabelling of stearyl alcohol and showing its presence inside hair cross-sections. The gel network role in delivering fatty alcohol inside hair is demonstrated by comparing with a shampoo with added fatty alcohol not in an ordered gel network structure. The hair containing fatty alcohol was measured via the Dia-stron cyclic fatigue instrument and showed a significantly higher number of cycles to break vs control. The formation of a stable gel network was confirmed in the formulated shampoo, and it was demonstrated that this gel network is important to deliver cetyl and stearyl alcohols into hair. The presence of fatty alcohol inside hair was shown to deliver a hair strength benefit via cyclic fatigue testing. © 2017 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Interactive Planning under Uncertainty with Casual Modeling and Analysis

DTIC Science & Technology

2006-01-01

Tool ( CAT ), a system for creating and analyzing causal models similar to Bayes networks. In order to use CAT as a tool for planning, users go through...an iterative process in which they use CAT to create and an- alyze alternative plans. One of the biggest difficulties is that the number of possible...Causal Analysis Tool ( CAT ), which is a tool for representing and analyzing causal networks sim- ilar to Bayesian networks. In order to represent plans

Lower-extremity musculoskeletal geometry affects the calculation of patellofemoral forces in vertical jumping and weightlifting.

PubMed

Cleather, D I; Bull, A M J

2010-01-01

The calculation of the patellofemoral joint contact force using three-dimensional (3D) modelling techniques requires a description of the musculoskeletal geometry of the lower limb. In this study, the influence of the complexity of the muscle model was studied by considering two different muscle models, the Delp and Horsman models. Both models were used to calculate the patellofemoral force during standing, vertical jumping, and Olympic-style weightlifting. The patellofemoral forces predicted by the Horsman model were markedly lower than those predicted by the Delp model in all activities and represented more realistic values when compared with previous work. This was found to be a result of a lower level of redundancy in the Delp model, which forced a higher level of muscular activation in order to allow a viable solution. The higher level of complexity in the Horsman model resulted in a greater degree of redundancy and consequently lower activation and patellofemoral forces. The results of this work demonstrate that a well-posed muscle model must have an adequate degree of complexity to create a sufficient independence, variability, and number of moment arms in order to ensure adequate redundancy of the force-sharing problem such that muscle forces are not overstated.

Energetic Neutral Atom (ENA) Movies and Other Cool Data from Cassini's Magnetosphere Imaging Instrument (MIMI)

NASA Astrophysics Data System (ADS)

Kusterer, M. B.; Mitchell, D. G.; Krimigis, S. M.; Vandegriff, J. D.

2014-12-01

Having been at Saturn for over a decade, the MIMI instrument on Cassini has created a rich dataset containing many details about Saturn's magnetosphere. In particular, the images of energetic neutral atoms (ENAs) taken by the Ion and Neutral Camera (INCA) offer a global perspective on Saturn's plasma environment. The MIMI team is now regularly making movies (in MP4 format) consisting of consecutive ENA images. The movies correct for spacecraft attitude changes by projecting the images (whose viewing angles can substantially vary from one image to the next) into a fixed inertial frame that makes it easy to view spatial features evolving in time. These movies are now being delivered to the PDS and are also available at the MIMI team web site. Several other higher order products are now also available, including 20-day energy-time spectrograms for the Charge-Energy-Mass Spectrometer (CHEMS) sensor, and daily energy-time spectrograms for the Low Energy Magnetospheric Measurements system (LEMMS) sensor. All spectrograms are available as plots or digital data in ASCII format. For all MIMI sensors, a Data User Guide is also available. This paper presents details and examples covering the specifics of MIMI higher order data products. URL: http://cassini-mimi.jhuapl.edu/

Medical education and information and communication technology.

PubMed

Houshyari, Asefeh Badiey; Bahadorani, Mahnaz; Tootoonchi, Mina; Gardiner, John Jacob Zucker; Peña, Roberto A; Adibi, Peyman

2012-01-01

Information and communication technology (ICT) has brought many changes in medical education and practice in the last couple of decades. Teaching and learning medicine particularly has gone under profound changes due to computer technologies, and medical schools around the world have invested heavily either in new computer technologies or in the process of adapting to this technological revolution. In order to catch up with the rest of the world, developing countries need to research their options in adapting to new computer technologies. This descriptive survey study was designed to assess medical students' computer and Internet skills and their attitude toward ICT. Research findings showed that the mean score of self-perceived computer knowledge for male students in general was greater than for female students. Also, students who had participated in various prior computer workshops, had access to computer, Internet, and e-mail, and frequently checked their e-mail had higher mean of self-perceived knowledge and skill score. Finally, students with positive attitude toward ICT scored their computer knowledge higher than those who had no opinion. The results have confirmed that the medical schools, particularly in developing countries, need to bring fundamental changes such as curriculum modification in order to integrate ICT into medical education, creating essential infrastructure for ICT use in medical education and practice, and structured computer training for faculty and students.

Co-Creating Curriculum in Higher Education: Promoting Democratic Values and a Multidimensional View on Learning

ERIC Educational Resources Information Center

Bergmark, Ulrika; Westman, Susanne

2016-01-01

This paper discusses a case study in teacher education in Sweden, focusing on creating spaces for student engagement through co-creating curriculum. It highlights democratic values and a multidimensional learning view as underpinning such endeavors. The main findings are that co-creating curriculum is an ambiguous process entailing unpredictable,…

Self-presentation in Online Professional Networks: Men's Higher and Women's Lower Facial Prominence in Self-created Profile Images.

PubMed

Sczesny, Sabine; Kaufmann, Michèle C

2017-01-01

Men are presented with higher facial prominence than women in the media, a phenomenon that is called face-ism . In naturalistic settings, face-ism effects could be driven by gender biases of photographers and/or by gender differences in self-presentation. The present research is the first to investigate whether women and men themselves create this different facial prominence. In a controlled laboratory study, 61 participants prepared a picture of themselves from a half-body photograph, allegedly to be uploaded to their profile for an online professional network. As expected, men cropped their photos with higher facial prominence than women did. However, women and men did not differ in the self-presentational motivations, goals, strategies, and personality variables under investigation, so that the observed face-ism effect could not be explained with these variables. Generally, the higher participants' physical appearance self-esteem, the higher was their self-created facial prominence.

Self-presentation in Online Professional Networks: Men's Higher and Women's Lower Facial Prominence in Self-created Profile Images

PubMed Central

Sczesny, Sabine; Kaufmann, Michèle C.

2018-01-01

Men are presented with higher facial prominence than women in the media, a phenomenon that is called face-ism. In naturalistic settings, face-ism effects could be driven by gender biases of photographers and/or by gender differences in self-presentation. The present research is the first to investigate whether women and men themselves create this different facial prominence. In a controlled laboratory study, 61 participants prepared a picture of themselves from a half-body photograph, allegedly to be uploaded to their profile for an online professional network. As expected, men cropped their photos with higher facial prominence than women did. However, women and men did not differ in the self-presentational motivations, goals, strategies, and personality variables under investigation, so that the observed face-ism effect could not be explained with these variables. Generally, the higher participants' physical appearance self-esteem, the higher was their self-created facial prominence. PMID:29387029

Technological Innovation: Higher Education, Small Manufacturing Enterprises Growth and the Five (I) Technological Development Model in Kenya

ERIC Educational Resources Information Center

Ng'ang'a, S. I.; Kabethi, J. M.; Kiumbe, P. M.; Otii, Leonard

2014-01-01

In Less Developed Countries (LDCs), most graduates from higher institutions of learning are absorbed in the informal sector and/or micro and small enterprises. Knowledge development through training, research and experiential learning may lead to creating or discovering new knowledge/technology or creating new value, by applying…

Assessing Strategies to Manage Work and Life Balance of Athletic Trainers Working in the National Collegiate Athletic Association Division I Setting

PubMed Central

Mazerolle, Stephanie M.; Pitney, William A.; Casa, Douglas J.; Pagnotta, Kelly D.

2011-01-01

Abstract Context: Certified athletic trainers (ATs) working at the National Collegiate Athletic Association Division I level experience challenges balancing their professional and personal lives. However, an understanding of the strategies ATs use to promote a balance between their professional and personal lives is lacking. Objective: To identify the strategies ATs employed in the Division I setting use to establish a balance between their professional and personal lives. Design: Qualitative investigation using inductive content analysis. Setting: Athletic trainers employed at Division I schools from 5 National Athletic Trainers' Association districts. Patients or Other Participants: A total of 28 (15 women, 13 men) ATs aged 35 ± 9 years volunteered for the study. Data Collection and Analysis: Asynchronous electronic interviews with follow-up phone interviews. Data were analyzed using inductive content analysis. Peer review, member checking, and data-source triangulation were conducted to establish trustworthiness. Results: Three higher-order themes emerged from the analysis. The initial theme, antecedents of work–family conflict, focused on the demands of the profession, flexibility of work schedules, and staffing patterns as contributing to work–life conflict for this group of ATs. The other 2 emergent higher-order themes, professional factors and personal factors, describe the components of a balanced lifestyle. The second-order theme of constructing the professional factors included both organizational policies and individual strategies, whereas the second-order theme of personal factors was separation of work and life and a supportive personal network. Conclusions: Long work hours, lack of control over work schedules, and unbalanced athlete-to-AT ratios can facilitate conflicts. However, as demonstrated by our results, several organizational and personal strategies can be helpful in creating a balanced lifestyle. PMID:21391805

Assessing strategies to manage work and life balance of athletic trainers working in the National Collegiate Athletic Association Division I setting.

PubMed

Mazerolle, Stephanie M; Pitney, William A; Casa, Douglas J; Pagnotta, Kelly D

2011-01-01

Certified athletic trainers (ATs) working at the National Collegiate Athletic Association Division I level experience challenges balancing their professional and personal lives. However, an understanding of the strategies ATs use to promote a balance between their professional and personal lives is lacking. To identify the strategies ATs employed in the Division I setting use to establish a balance between their professional and personal lives. Qualitative investigation using inductive content analysis. Athletic trainers employed at Division I schools from 5 National Athletic Trainers' Association districts. A total of 28 (15 women, 13 men) ATs aged 35 ± 9 years volunteered for the study. Asynchronous electronic interviews with follow-up phone interviews. Data were analyzed using inductive content analysis. Peer review, member checking, and data-source triangulation were conducted to establish trustworthiness. Three higher-order themes emerged from the analysis. The initial theme, antecedents of work-family conflict, focused on the demands of the profession, flexibility of work schedules, and staffing patterns as contributing to work-life conflict for this group of ATs. The other 2 emergent higher-order themes, professional factors and personal factors, describe the components of a balanced lifestyle. The second-order theme of constructing the professional factors included both organizational policies and individual strategies, whereas the second-order theme of personal factors was separation of work and life and a supportive personal network. Long work hours, lack of control over work schedules, and unbalanced athlete-to-AT ratios can facilitate conflicts. However, as demonstrated by our results, several organizational and personal strategies can be helpful in creating a balanced lifestyle.

Home Page: The Mode of Transport through the Information Superhighway

NASA Technical Reports Server (NTRS)

Lujan, Michelle R.

1995-01-01

The purpose of the project with the Aeroacoustics Branch was to create and submit a home page for the internet about branch information. In order to do this, one must also become familiar with the way that the internet operates. Learning HyperText Markup Language (HTML), and the ability to create a document using this language was the final objective in order to place a home page on the internet (World Wide Web). A manual of instructions regarding maintenance of the home page, and how to keep it up to date was also necessary in order to provide branch members with the opportunity to make any pertinent changes.

As-built design specification for PARCLS

NASA Technical Reports Server (NTRS)

Tompkins, M. A. (Principal Investigator)

1981-01-01

The PARCLS program, part of the CLASFYG package, reads a parameter file created by the CLASFYG program and a pure pixel ground truth file in order to create to classification file of three separate crop categories in universal format.

The prevalence and effect of burnout on graduate healthcare students.

PubMed

Bullock, Garrett; Kraft, Lynnea; Amsden, Katherine; Gore, Whitney; Prengle, Bobby; Wimsatt, Jeffrey; Ledbetter, Leila; Covington, Kyle; Goode, Adam

2017-06-01

Burnout is a growing epidemic among professional healthcare students. Unaddressed burnout has been shown to have psychological and performance related detriments. The purpose of this scoping literature review was to investigate the prevalence of burnout and its effects on the psychological, professional, empathetic ability, and academic acuity of graduate healthcare students. Inclusion criteria included English language papers published within the last 10 years and subjects in graduate healthcare professional programs. This search encompassed 8,214 articles. After title and abstract screening, 127 articles remained and were sorted into five domains of interest: etiology, professionalism, mental health, empathy, and academic performance. After duplicates were removed, 27 articles remained for the scoping review. Graduate level healthcare students had higher levels of burnout than age matched peers and the general population. The high prevalence of burnout within graduate healthcare students can have an effect on their mental health, empathy, and professional conduct. Understanding the occurrence and effects of burnout within graduate healthcare programs allows faculty and administration to plan curriculum, and provide information to students to understand, recognize, and create opportunities to decrease burnout in order to create long lasting quality clinicians.

78 FR 52561 - Public Land Order No. 7820; Partial Modification, Public Water Reserve No. 107; Utah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

...-52455] Public Land Order No. 7820; Partial Modification, Public Water Reserve No. 107; Utah AGENCY: Bureau of Land Management, Interior. ACTION: Public Land Order. SUMMARY: This order partially modifies a withdrawal created by an Executive Order insofar as it affects 264.21 acres of public lands withdrawn from...

From RHIC to LHC: Lessons on the QGP

NASA Astrophysics Data System (ADS)

Heinz, Ulrich

2011-10-01

Recent data from heavy-ion collisions at RHIC and LHC, together with significant advances in theory, have allowed us to make significant first steps in proceeding from a qualitative understanding of high energy collision dynamics to a quantitative characterization of the transport properties of the hot and dense QCD matter created in these collisions. The almost perfectly liquid nature of the Quark-Gluon Plasma (QGP) created at RHIC has recently also been confirmed at the much higher LHC energies, and we can now constrain the specific QGP shear viscosity (η / s) QGP to within a factor of 2.5 of its conjectured lower quantum bound. Viscous hydrodynamics, coupled to a microscopic hadron cascade at late times, has proven to be an extremely successful and highly predictive model for the QGP evolution at RHIC and LHC. The experimental discovery of higher order harmonic flow coefficients and their theoretically predicted differential sensitivity to shear viscosity promises additional gains in precision by about a factor 5 in (η / s) QGP for the very near future. The observed modification of jets and suppression of high-pT hadrons confirms the picture of the QGP as a strongly coupled colored liquid, and recent LHC data yield strong constraints on parton energy loss models, putting significant strain on some theoretical approaches, tuned to RHIC data, that are based on leading-order perturbative QCD. Thermal photon radiation provides important cross-checks on the early stages of dynamical evolution models and constrains the initial QGP temperature, but the recently measured strong photon elliptic flow challenges our present understanding of photon emission rates in the hadronic phase. Recent progress in developing a complete theoretical model for all stages of the QGP fireball expansion, from strong fluctuating gluon fields at its beginning to final hadronic freeze-out, and remaining challenges will be discussed. Work supported by DOE (grants DE-SC0004286 and DE-SC0004104 (JET Collaboration)).

Anisotropic Dye Adsorption and Anhydrous Proton Conductivity in Smectic Liquid Crystal Networks: The Role of Cross-Link Density, Order, and Orientation.

PubMed

Liang, Ting; van Kuringen, Huub P C; Mulder, Dirk J; Tan, Shuai; Wu, Yong; Borneman, Zandrie; Nijmeijer, Kitty; Schenning, Albertus P H J

2017-10-11

In this work, the decisive role of rigidity, orientation, and order in the smectic liquid crystalline network on the anisotropic proton and adsorbent properties is reported. The rigidity in the hydrogen-bonded polymer network has been altered by changing the cross-link density, the order by using different mesophases (smectic, nematic, and isotropic phases), whereas the orientation of the mesogens was controlled by alignment layers. Adding more cross-linkers improved the integrity of the polymer films. For the proton conduction, an optimum was found in the amount of cross-linker and the smectic organization results in the highest anhydrous proton conduction. The polymer films show anisotropic proton conductivity with a 54 times higher conductivity in the direction perpendicular to the molecular director. After a base treatment of the smectic liquid crystalline network, a nanoporous polymer film is obtained that also shows anisotropic adsorption of dye molecules and again straight smectic pores are favored over disordered pores in nematic and isotropic networks. The highly cross-linked films show size-selective adsorption of dyes. Low cross-linked materials do not show this difference due to swelling, which decreases the order and creates openings in the two-dimensional polymer layers. The latter is, however, beneficial for fast adsorption kinetics.

Bioinspired large-scale aligned porous materials assembled with dual temperature gradients

PubMed Central

Bai, Hao; Chen, Yuan; Delattre, Benjamin; Tomsia, Antoni P.; Ritchie, Robert O.

2015-01-01

Natural materials, such as bone, teeth, shells, and wood, exhibit outstanding properties despite being porous and made of weak constituents. Frequently, they represent a source of inspiration to design strong, tough, and lightweight materials. Although many techniques have been introduced to create such structures, a long-range order of the porosity as well as a precise control of the final architecture remain difficult to achieve. These limitations severely hinder the scale-up fabrication of layered structures aimed for larger applications. We report on a bidirectional freezing technique to successfully assemble ceramic particles into scaffolds with large-scale aligned, lamellar, porous, nacre-like structure and long-range order at the centimeter scale. This is achieved by modifying the cold finger with a polydimethylsiloxane (PDMS) wedge to control the nucleation and growth of ice crystals under dual temperature gradients. Our approach could provide an effective way of manufacturing novel bioinspired structural materials, in particular advanced materials such as composites, where a higher level of control over the structure is required. PMID:26824062

A generative spike train model with time-structured higher order correlations.

PubMed

Trousdale, James; Hu, Yu; Shea-Brown, Eric; Josić, Krešimir

2013-01-01

Emerging technologies are revealing the spiking activity in ever larger neural ensembles. Frequently, this spiking is far from independent, with correlations in the spike times of different cells. Understanding how such correlations impact the dynamics and function of neural ensembles remains an important open problem. Here we describe a new, generative model for correlated spike trains that can exhibit many of the features observed in data. Extending prior work in mathematical finance, this generalized thinning and shift (GTaS) model creates marginally Poisson spike trains with diverse temporal correlation structures. We give several examples which highlight the model's flexibility and utility. For instance, we use it to examine how a neural network responds to highly structured patterns of inputs. We then show that the GTaS model is analytically tractable, and derive cumulant densities of all orders in terms of model parameters. The GTaS framework can therefore be an important tool in the experimental and theoretical exploration of neural dynamics.

The Third SeaWiFS HPLC Analysis Round-Robin Experiment (SeaHARRE-3)

NASA Technical Reports Server (NTRS)

Hooker, Stanford B.; VanHeukelem, Laurei; Thomas, Crystal S.; Claustre, Herve; Ras, Josephine; Schluter, Louise; Clementson, Lesley; vanderLinde, Dirk; Eker-Develi, Elif; Berthon, Jean-Francois;

[Problems in career planning for novice medical technologists in Japanese national hospitals].

PubMed

Ogasawara, Shu; Tsutaya, Shoji; Akimoto, Hiroyuki; Kojima, Keiya; Yabaka, Hiroyuki

2012-12-01

Skills and knowledge regarding many different types of test are required for medical technologists (MTs) to provide accurate information to help doctors and other medical specialists. In order to become an efficient MT, specialized training programs are required. Certification in specialized areas of clinical laboratory sciences or a doctoral degree in medical sciences may help MTs to realize career advancement, a higher earning potential, and expand the options in their career. However, most young MTs in national university hospitals are employed as part-time workers on a three-year contract, which is too short to obtain certifications or a doctoral degree. We have to leave the hospital without expanding our future. We need to take control of our own development in order to enhance our employability within the period. As teaching and training hospitals, national university hospitals in Japan are facing a difficult dilemma in nurturing MTs. I hope, as a novice medical technologist, that at least university hospitals in Japan create an appropriate workplace environment for novice MTs.

Teaching introductory game development with unreal engine: Challenges, strategies, and experiences

NASA Astrophysics Data System (ADS)

Head, Nicholas A.

From the days of Pong to 100 million dollar projects such as the Grand Theft Auto franchise, video games have evolved significantly over the years. This evolution has also changed the way game development is viewed as a career. Today, video games are one of the most profitable forms of entertainment, and game development courses are appearing at universities around the world. Even with this growth, a degree from a university has yet to be an important factor in finding a job in game development (Owen, 2013). This thesis examines a method of creating and implementing an introductory gaming course and recommends ways to improve the curriculum. The main focus of the course was to introduce game development to the students. Each week, they were given an exercise that covered a different topic. Students also took part in a team project in which they were tasked with creating a complete game. The goal of the team projects was to expand the student's basic knowledge given to them from the exercises. Data was gathered on the students' subjective experiences with the class. This data and the class's overall performance were compared with past iterations of the course. New to the course was the Unreal Engine. Students used the latest version of the engine, Unreal Engine 4, to complete exercises. Not all students chose to use this engine for the team project. Instructor and students experiences with the engine were also recorded. While there were some problems implementing the engine within our lab environment, we were still able to execute the overall lesson plan. Even with the engine issues, the course had overall good performance. CGT 241, Introduction to 3D Animation, was shown to help the students to complete the course while CGT 215, Computer Graphics Programming I, did not provide enough information on game programming. Exercises were found to be helpful but students wanted a better understanding of how these skills can be applied to game development. Team projects also went well with most teams creating a functional project. Students wanted more time to complete projects along with a structured approach to the project. Confidence in game development and the Unreal Engine were not high but students were enthusiastic in continuing in the field of game development. Recommendations were made to the curriculum in order to fix some of the issues with the introductory course and help students find a career. In order to fix the gap between the programming course and the introductory game course, a video game programming course was recommended that focused on teaching students how code works with video game engines. An option to specialize was also recommended in order to see a higher level of understanding on game concepts and a higher level of quality of game projects. Changes to the higher courses were also made for a yearlong course where students would focus on a single project to publish. This would expand on the introductory course while also replicating the game development process.

Titanium based flat heat pipes for computer chip cooling

NASA Astrophysics Data System (ADS)

Soni, Gaurav; Ding, Changsong; Sigurdson, Marin; Bozorgi, Payam; Piorek, Brian; MacDonald, Noel; Meinhart, Carl

2008-11-01

We are developing a highly conductive flat heat pipe (called Thermal Ground Plane or TGP) for cooling computer chips. Conventional heat pipes have circular cross sections and thus can't make good contact with chip surface. The flatness of our TGP will enable conformal contact with the chip surface and thus enhance cooling efficiency. Another limiting factor in conventional heat pipes is the capillary flow of the working fluid through a wick structure. In order to overcome this limitation we have created a highly porous wick structure on a flat titanium substrate by using micro fabrication technology. We first etch titanium to create very tall micro pillars with a diameter of 5 μm, a height of 40 μm and a pitch of 10 μm. We then grow a very fine nano structured titania (NST) hairs on all surfaces of the pillars by oxidation in H202. In this way we achieve a wick structure which utilizes multiple length scales to yield high performance wicking of water. It's capable of wicking water at an average velocity of 1 cm/s over a distance of several cm. A titanium cavity is laser-welded onto the wicking substrate and a small quantity of water is hermetically sealed inside the cavity to achieve a TGP. The thermal conductivity of our preliminary TGP was measured to be 350 W/m-K, but has the potential to be several orders of magnitude higher.

Virtual in Real. Interactive Solutions for Learning and Communication in the National Archaeological Museum of Marche

NASA Astrophysics Data System (ADS)

Clini, P.; Nespeca, R.; Ruggeri, L.

2017-05-01

Today the ICTs are favourable additions to museum exhibitions. This work aims to realize an innovative system of digital exploitation of artefacts in the National Archaeological Museum of Marche (MANaM), in order to create a shared museum that will improve the knowledge of cultural contents through the paradigm "learning by interacting" and "edutainment". The main novelty is the implementation of stand-alone multimedia installations for digital artefacts that combine real and virtual scenarios in order to enrich the experience, the knowledge and the multi-sensory perception. A Digital Library (DL) is created using Close Range Photogrammetry (CRP) techniques applied to 21 archaeological artefacts belonging to different categories. Enriched with other data (texts, images, multimedia), all 3D models flow into the cloud data server from which are recalled in the individual exhibitions. In particular, we have chosen three types of technological solutions: VISUAL, TACTILE, SPATIAL. All the solutions take into account the possibility of group interaction, allowing the participation of the interaction to an appropriate number of users. Sharing the experience enables greater involvement, generating communicative effectiveness much higher than it would get from a lonely visit. From the "Museum Visitors Behaviour Analysis" we obtain a survey about users' needs and efficiency of the interactive solutions. The main result of this work is the educational impact in terms of increase in visitors, specially students, learning increase of historical and cultural content, greater user involvement during the visit to the museum.

Creating Magic Squares.

ERIC Educational Resources Information Center

Lyon, Betty Clayton

1990-01-01

One method of making magic squares using a prolongated square is illustrated. Discussed are third-order magic squares, fractional magic squares, fifth-order magic squares, decimal magic squares, and even magic squares. (CW)

Supporting Educational Games in Higher Education: The Creation and Implementation of Custom Game Engine for a University

ERIC Educational Resources Information Center

Choi, Gi Woong; Pursel, Barton K.; Stubbs, Chris

2017-01-01

Interest towards implementing educational gaming into courses within higher education continues to increase, but it requires extensive amounts of resources to create individual games for each course. This paper is a description of a university's effort to create a custom educational game engine to streamline the game development process within the…

Importance-satisfaction analysis of street food sanitation and choice factor in Korea and Taiwan

PubMed Central

Joo, Nami; Park, Sanghyun; Lee, Bohee

2015-01-01

BACKGROUND/OBJECTIVES The present study investigated Korean and Taiwan adults on the importance of and the satisfaction with street food sanitation and street food choice factor, in order to present management and improvement measures for street foods. SUBJECTS/METHODS The present study conducted a survey on 400 randomly chosen adults (200 Korean, 200 Taiwanese). General characteristics, eating habits, street food intake frequency, and preference by type of street food of respondents were checked. Respondents' importance and satisfaction of street food hygiene and selection attributes were also measured. In order to test for the difference between groups, χ2-test and t-test were performed. ISA was also performed to analyze importance and satisfaction. RESULTS Results showed that the importance of sanitation was significantly higher than satisfaction on all items in both Korea and Taiwan, and the satisfaction with sanitation was higher in Taiwan than in Korea. According to ISA results with street food sanitation, satisfaction was low while importance was high in both Korea and Taiwan. In terms of street food choice factor, importance scores were significantly higher than satisfaction scores on all items. In addition, satisfaction scores on all items except 'taste' were significantly higher in Taiwan than in Korea. CONCLUSIONS A manual on sanitation management of street foods should be developed to change the knowledge and attitude toward sanitation by putting into practice a regularly conducted education. Considering the popularity of street foods and its potential as a tourism resource to easily publicize our food culture, thorough management measures should be prepared on sanitation so that safe street food culture should be created. PMID:26060542

Interagency Suspension and Debarment Committee

EPA Pesticide Factsheets

The Interagency Suspension and Debarment Committee (ISDC) was created, as an Office of Management and Budget (OMB) committee, by Executive Order 12549 for the purpose of monitoring the implementation of the Order.

Studying and controlling order within nanoparticle monolayers fabricated through electrophoretic deposition

NASA Astrophysics Data System (ADS)

Krejci, Alexander J.

Just as ensembles of ordered atoms (a crystal) exhibit collective properties which give rise to phenomena that do not exist for a single atom, the same is true of NP ensembles; ordered arrays of NPs (supercrystals) exhibit properties that are not observed in individual NPs. These collective properties open the door for even more applications for nanomaterials. A few examples that demonstrate this fact will be discussed. In the first example, photoluminescent (PL) optical properties of three CdSe NP systems were studied: one ordered array of NPs, one unordered array, and one system of isolated NPs. In these three systems, the ordered array showed a significantly sharper PL peak compared to the unordered array and the individual NPs. In a second example, the electrical properties for three systems of Ag NPs were studied: one hexagonally packed 2D array of Ag NPs, one cubically packed 2D array, and one individual NP. I-V curves of each system were measured and produced dramatically different behaviors simply due to the change in arrangement of NPs. In a final example, arrays of Ag NPs were created and then sintered. By sintering ordered arrays, it was possible to create large monocrystals of silver; monocrystals could not be created using unordered arrays. These are just three examples that elucidate the control over a wide range of properties that can be achieved by tuning the order within NP ensembles. Given the potential of films composed of ordered NP arrays, many researchers have been investigating how to create and control such arrays using a variety of techniques. For example, ligand-mediated assembly is being studied using a variety of ligands. DNA ligands, in particular, offer a powerful way to control NP assemblies. Evaporative self-assembly has been used to create large supercrystals of one, two, and even more types/sizes of NPs. Assisted assembly incorporating electric and/or magnetic fields has shown promise in creating ordered NP arrays. Spin-casting and Langmuir Blodgett films can be used to create very thin NP films. Templated substrates in combination with spin coating have been used to order blockcopolymers; this could be adapted for NP arrays as well. Some of these techniques can be applied for forming ordered arrays of NPs in two-dimensions, creating nanoparticle monolayers (NPMs), the focus of this work. NPMs are attractive for many applications in devices such as magnetic storage, solar cells, and biosensors. One particularly attractive feature of NPMs is the high surface area to volume ratio of the films. For example, through collaboration, we are investigating PL properties of two monolayers, composed of two different types of NPs, stacked on top of one another. Although challenging, there now are a variety of techniques for the fabrication of NPMs. This dissertation introduces a new process by which one can fabricate monolayers, electrophoretic deposition (EPD). Literature exists on using EPD to fabricate NPMs, but this literature is very limited. One such study deposited films of Au NPs on carbon films and another Pt NPs on carbon films. To the best of our knowledge, only NPMs of metallic NPs on carbon have been fabricated. Of the EPD studies in which NPMs have been fabricated, the technique has not been investigated in depth or has not been generalized for deposition of many types of materials. If NPM formation via EPD could be generalized, the NPMs could be industrially attractive as EPD has many industrially advantageous properties. For instance, EPD is highly versatile in multiple ways: many types of particles can be deposited, the size of the electrodes can be varied over many orders of magnitude, and a large variety of solvents can be used to suspend NPs. For example, our group has deposited materials of different shapes including tubes, sheets, and spheres; different materials such as polymers, metals, semiconductors, and magnetic materials; and on a variety of substrates including steel, silicon, silicon dioxide, indium tin oxide, and gold. In addition, EPD is very simple to perform, forms smooth films, and forms films quite rapidly. By fabricating NPMs of many types of NPs, the technique used herein has proven to be generalizable and thus could be industrially attractive. (Abstract shortened by UMI.)

Development of the self-learning machine for creating models of microprocessor of single-phase earth fault protection devices in networks with isolated neutral voltage above 1000 V

NASA Astrophysics Data System (ADS)

Utegulov, B. B.; Utegulov, A. B.; Meiramova, S.

2018-02-01

The paper proposes the development of a self-learning machine for creating models of microprocessor-based single-phase ground fault protection devices in networks with an isolated neutral voltage higher than 1000 V. Development of a self-learning machine for creating models of microprocessor-based single-phase earth fault protection devices in networks with an isolated neutral voltage higher than 1000 V. allows to effectively implement mathematical models of automatic change of protection settings. Single-phase earth fault protection devices.

Lipid nanoparticles based on butyl-methoxydibenzoylmethane: in vitro UVA blocking effect

NASA Astrophysics Data System (ADS)

Niculae, G.; Lacatusu, I.; Badea, N.; Meghea, A.

2012-08-01

The aim of the present study was to obtain efficient lipid nanoparticles loaded with butyl-methoxydibenzoylmethane (BMDBM) in order to develop cosmetic formulations with enhanced UVA blocking effect. For this purpose, two adequate liquid lipids (medium chain triglycerides and squalene) have been used in combination with two solid lipids (cetyl palmitate and glyceryl stearate) in order to create appropriate nanostructured carriers with a disordered lipid network able to accommodate up to 1.5% BMDBM. The lipid nanoparticles (LNs) were characterized in terms of particle size, zeta potential, entrapment efficiency, loading capacity and in vitro UVA blocking effect. The efficiency of lipid nanoparticles in developing some cosmetic formulations has been evaluated by determining the in vitro erythemal UVA protection factor. In order to quantify the photoprotective effect, some selected cream formulations based on BMDBM-LNs and a conventional emulsion were exposed to photochemical UV irradiation at a low energy to simulate the solar energy during the midday. The results obtained demonstrated the high ability of cream formulations based on BMDBM-LNs to absorb more than 96% of UVA radiation. Moreover, the developed cosmetic formulations manifest an enhanced UVA blocking effect, the erythemal UVA protection factor being four times higher than those specific to conventional emulsions.

Using a Genetic Algorithm to Learn Behaviors for Autonomous Vehicles,

DTIC Science & Technology

1992-08-12

Truly autonomous vehicles will require both projective planning and reactive components in order to perform robustly. Projective components are...long time period. This work addresses the problem of creating reactive components for autonomous vehicles . Creating reactive behaviors (stimulus

Materials engineering, characterization, and applications of the organicbased magnet, V[TCNE

NASA Astrophysics Data System (ADS)

Harberts, Megan

Organic materials have advantageous properties such as low cost and mechanical flexibility that have made them attractive to complement traditional materials used in electronics and have led to commercial success, especially in organic light emitting diodes (OLEDs). Many rapidly advancing technologies incorporate magnetic materials, leading to the potential for creating analogous organic-based magnetic applications. The semiconducting ferrimagnet, vanadium tetracyanoethylene, V[TCNE]x˜2, exhibits room temperature magnetic ordering which makes it an attractive candidate. My research is focused on development of thin films of V[TCNE]x˜2 through advancement in growth, materials engineering, and applications. My thesis is broken up into two sections, the first which provides background and details of V[TCNE]x˜2 growth and characterization. The second section focuses on advances beyond V[TCNE]x˜2 film growth. The ordering of the chapters is for the ease of the reader, but encompasses work that I led and robust collaborations that I have participated in. V[TCNE]x˜2 films are deposited through a chemical vapor deposition process (CVD). My advancements to the growth process have led to higher quality films which have higher magnetic ordering temperatures, more magnetically homogenous samples, and extremely narrow ferromagnetic resonance (FMR) linewidths. Beyond improvements in film growth, materials engineering has created new materials and structures with properties to compliment thin film V[TCNE]x˜2. Though a robust collaboration with chemistry colleagues, modification of the molecule TCNE has led to the creation of new magnetic materials vanadium methyl tricyanoethylene carboxylate, V[MeTCEC]x and vanadium ethyl tricyanoethylene carboxylate, V[ETCEC]x. Additionally, I have lead a project to deposit V[TCNE]x˜2 on periodically patterned substrates leading to the formation of a 1-D array of V[TCNE]x˜2 nanowires. These arrays exhibit in-plane magnetic anisotropy, which is not observed in films of V[TCNE]x˜2. Additional collaborations have also made significant progress in addressing one of the challenges for incorporating V[TCNE]x˜2 into applications, which is the degradation of magnetic properties with exposure to oxygen. By working off of encapsulation technology which has been developed for OLEDs, we have shown that we can use a simple epoxy to extend the magnetic properties of V[TCNE]x˜2 films from an order of hours to one month in ambient conditions.

New Chemicals Program - Boilerplates for Orders under section 5 of TSCA

EPA Pesticide Factsheets

EPA issues orders under section 5 of the TSCA in response to a specific concern. These concerns are often very similar to concerns that have incited prior orders. To prevent this, the Agency created a standard boilerplate for the more frequent concerns.

3 CFR 13631 - Executive Order 13631 of December 7, 2012. Reestablishment of Advisory Group

Code of Federal Regulations, 2013 CFR

2013-01-01

... Patient Protection and Affordable Care Act (Public Law 111-148), 42 U.S.C. 300u-10, it is hereby ordered..., administrative, or legislative proposals. (b) This order is not intended to, and does not, create any right or...

Spatial and temporal microbial pollution patterns in a tropical estuary during high and low river flow conditions.

PubMed

Wiegner, T N; Edens, C J; Abaya, L M; Carlson, K M; Lyon-Colbert, A; Molloy, S L

2017-01-30

Spatial and temporal patterns of coastal microbial pollution are not well documented. Our study examined these patterns through measurements of fecal indicator bacteria (FIB), nutrients, and physiochemical parameters in Hilo Bay, Hawai'i, during high and low river flow. >40% of samples tested positive for the human-associated Bacteroides marker, with highest percentages near rivers. Other FIB were also higher near rivers, but only Clostridium perfringens concentrations were related to discharge. During storms, FIB concentrations were three times to an order of magnitude higher, and increased with decreasing salinity and water temperature, and increasing turbidity. These relationships and high spatial resolution data for these parameters were used to create Enterococcus spp. and C. perfringens maps that predicted exceedances with 64% and 95% accuracy, respectively. Mapping microbial pollution patterns and predicting exceedances is a valuable tool that can improve water quality monitoring and aid in visualizing FIB hotspots for management actions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Autonomy and performance in the public sector: the experience of English NHS hospitals.

PubMed

Verzulli, Rossella; Jacobs, Rowena; Goddard, Maria

2018-05-01

Since 2004, English NHS hospitals have been given the opportunity to acquire a more autonomous status known as a Foundation Trust (FT), whereby regulations and restrictions over financial, management, and organizational matters were reduced in order to create incentives to deliver higher-quality services in the most efficient way. Using difference-in-difference models, we test whether achieving greater autonomy (FT status) improved hospital performance, as proxied by measures of financial management, quality of care, and staff satisfaction. Results provide little evidence that the FT policy per se has made any difference to the performance of hospitals in most of these domains. Our findings have implications for health policy and inform the trend towards granting greater autonomy to public-sector organizations.

Podcasts in Higher Education: Students' and Lecturers' Perspectives

NASA Astrophysics Data System (ADS)

Carvalho, Ana A.; Aguiar, Cristina; Santos, Henrique; Oliveira, Lia; Marques, Aldina; Maciel, Romana

This paper reports the use of podcasts in blended-learning at the University of Minho, in Portugal. Six lecturers created their own podcasts with different purposes in order to support their undergraduate and graduate courses and their students’ (n=318) learning. The reported study belongs to a broader project about the impact of podcasts in blended-learning and it reports data from two semesters. Results give evidence of students’ acceptance regarding podcasts although they do not yet make use of the advantages of media and mobile technologies. The lecturers considered podcasts worthwhile for teaching and for students to learn, but they are time-consuming and there is no institutional recognition. In spite of this, they intend to continue using podcasts in their courses.

Interactive forms of conducting business and role games in dialogical training

NASA Astrophysics Data System (ADS)

Medvedeva, L.; Yushkov, E.; Yakovlev, D.; Bogatyreova, M.

2017-01-01

Mastering interactive technologies by teachers of higher educational institutions is the basis of enhancing the quality of education. The competent use of interactive forms of business and role-play games at seminars strengthens a pedagogical effect on the development of the culture of thinking, professional and personal qualities of students, as well as provides an in-depth study of the subject and acquisition of scientific cognition methods. Dialogical thinking creates a truly open mind for sharing opinions and freely discussing suggestions made by the participants, especially in situations of seeking effective task-solving methods. In order to train competitive graduates, ready to act efficiently in their future career, it is necessary to apply innovational interactive technologies in the educational process.

Tracking the global footprint of fisheries

NASA Astrophysics Data System (ADS)

Kroodsma, David A.; Mayorga, Juan; Hochberg, Timothy; Miller, Nathan A.; Boerder, Kristina; Ferretti, Francesco; Wilson, Alex; Bergman, Bjorn; White, Timothy D.; Block, Barbara A.; Woods, Paul; Sullivan, Brian; Costello, Christopher; Worm, Boris

2018-02-01

Although fishing is one of the most widespread activities by which humans harvest natural resources, its global footprint is poorly understood and has never been directly quantified. We processed 22 billion automatic identification system messages and tracked >70,000 industrial fishing vessels from 2012 to 2016, creating a global dynamic footprint of fishing effort with spatial and temporal resolution two to three orders of magnitude higher than for previous data sets. Our data show that industrial fishing occurs in >55% of ocean area and has a spatial extent more than four times that of agriculture. We find that global patterns of fishing have surprisingly low sensitivity to short-term economic and environmental variation and a strong response to cultural and political events such as holidays and closures.

[Alcohol and work: remaining sober and return to work].

PubMed

Vittadini, G; Bandirali, M

2007-01-01

One of the most complex alcohol-driven problems is the job loss and the subsequent attempts to return to a professional activity. In order to better understand the issue, an epidemiologic investigation was carried out on a group of 162 alcoholics whilst hospitalised in a specialised clinic. The outcome shows the importance of remaining sober to keep or to be returned to one's own job. Unfortunately, local resources at hand, first of all joining an auto-mutual-help group, re still too little known and thus clearly underemployed. Therefore, an informative action within companies is highly desirable. Those alcoholics suffering from serious illnesses, especially mental ones represent a different issue. For these people a higher involvement of public authorities is desirable in creating protected job openings.

Molecular Design of Branched and Binary Molecules at Ordered Interfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Genson, Kirsten Larson

2005-01-01

This study examined five different branched molecular architectures to discern the effect of design on the ability of molecules to form ordered structures at interfaces. Photochromic monodendrons formed kinked packing structures at the air-water interface due to the cross-sectional area mismatch created by varying number of alkyl tails and the hydrophilic polar head group. The lower generations formed orthorhombic unit cell with long range ordering despite the alkyl tails tilted to a large degree. Favorable interactions between liquid crystalline terminal groups and the underlying substrate were observed to compel a flexible carbosilane dendrimer core to form a compressed elliptical conformationmore » which packed stagger within lamellae domains with limited short range ordering. A twelve arm binary star polymer was observed to form two dimensional micelles at the air-water interface attributed to the higher polystyrene block composition. Linear rod-coil molecules formed a multitude of packing structures at the air-water interface due to the varying composition. Tree-like rod-coil molecules demonstrated the ability to form one-dimensional structures at the air-water interface and at the air-solvent interface caused by the preferential ordering of the rigid rod cores. The role of molecular architecture and composition was examined and the influence chemically competing fragments was shown to exert on the packing structure. The amphiphilic balance of the different molecular series exhibited control on the ordering behavior at the air-water interface and within bulk structures. The shell nature and tail type was determined to dictate the preferential ordering structure and molecular reorganization at interfaces with the core nature effect secondary.« less

Student's Perceived Level and Teachers' Teaching Strategies of Higher Order Thinking Skills: A Study on Higher Educational Institutions in Thailand

ERIC Educational Resources Information Center

Shukla, Divya; Dungsungnoen, Aj Pattaradanai

2016-01-01

Higher order thinking skills (HOTS) has portrayed immense industry demand and the major goal of educational institution in imparting education is to inculcate higher order thinking skills. This compiles and mandate the institutions and instructor to develop the higher order thinking skills among students in order to prepare them for effective…

77 FR 47161 - Self-Regulatory Organizations; New York Stock Exchange LLC; NYSE Arca, Inc.; NYSE MKT LLC; Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

... Board of Directors of NYSE Euronext and Creating a New Independence Policy for Boards of Directors of... Euronext Board'') of NYSE Euronext (the ``NYSE Euronext Director Independence Policy'') and creating a new...

75 FR 28668 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... associations to act jointly in developing a national market system plan to create, implement, and maintain a consolidated audit trail that would capture customer and order event information, mostly in real time, for all orders in NMS securities, across all markets, from the time of order inception through routing...

Novel plant communities limit the effects of a managed flood to restore riparian forests along a large regulated river

USGS Publications Warehouse

Cooper, D.J.; Andersen, D.C.

2012-01-01

Dam releases used to create downstream flows that mimic historic floods in timing, peak magnitude and recession rate are touted as key tools for restoring riparian vegetation on large regulated rivers. We analysed a flood on the 5th-order Green River below Flaming Gorge Dam, Colorado, in a broad alluvial valley where Fremont cottonwood riparian forests have senesced and little recruitment has occurred since dam completion in 1962. The stable post dam flow regime triggered the development of novel riparian communities with dense herbaceous plant cover. We monitored cottonwood recruitment on landforms inundated by a managed flood equal in magnitude and timing to the average pre-dam flood. To understand the potential for using managed floods as a riparian restoration tool, we implemented a controlled and replicated experiment to test the effects of artificially modified ground layer vegetation on cottonwood seedling establishment. Treatments to remove herbaceous vegetation and create bare ground included herbicide application (H), ploughing (P), and herbicide plus ploughing (H+P). Treatment improved seedling establishment. Initial seedling densities on treated areas were as much as 1200% higher than on neighbouring control (C) areas, but varied over three orders of magnitude among the five locations where manipulations were replicated. Only two replicates showed the expected seedling density rank of (H+P)>P>H>C. Few seedlings established in control plots and none survived 1 year. Seedling density was strongly affected by seed rain density. Herbivory affected growth and survivorship of recruits, and few survived nine growing seasons. Our results suggest that the novel plant communities are ecologically and geomorphically resistant to change. Managed flooding alone, using flows equal to the pre-dam mean annual peak flood, is an ineffective riparian restoration tool where such ecosystem states are present and floods cannot create new habitat for seedling establishment. This problem significantly limits long-term river and riparian management options. ?? 2010 John Wiley & Sons, Ltd.

Dynamic permeability in fault damage zones induced by repeated coseismic fracturing events

NASA Astrophysics Data System (ADS)

Aben, F. M.; Doan, M. L.; Mitchell, T. M.

2017-12-01

Off-fault fracture damage in upper crustal fault zones change the fault zone properties and affect various co- and interseismic processes. One of these properties is the permeability of the fault damage zone rocks, which is generally higher than the surrounding host rock. This allows large-scale fluid flow through the fault zone that affects fault healing and promotes mineral transformation processes. Moreover, it might play an important role in thermal fluid pressurization during an earthquake rupture. The damage zone permeability is dynamic due to coseismic damaging. It is crucial for earthquake mechanics and for longer-term processes to understand how the dynamic permeability structure of a fault looks like and how it evolves with repeated earthquakes. To better detail coseismically induced permeability, we have performed uniaxial split Hopkinson pressure bar experiments on quartz-monzonite rock samples. Two sample sets were created and analyzed: single-loaded samples subjected to varying loading intensities - with damage varying from apparently intact to pulverized - and samples loaded at a constant intensity but with a varying number of repeated loadings. The first set resembles a dynamic permeability structure created by a single large earthquake. The second set resembles a permeability structure created by several earthquakes. After, the permeability and acoustic velocities were measured as a function of confining pressure. The permeability in both datasets shows a large and non-linear increase over several orders of magnitude (from 10-20 up to 10-14 m2) with an increasing amount of fracture damage. This, combined with microstructural analyses of the varying degrees of damage, suggests a percolation threshold. The percolation threshold does not coincide with the pulverization threshold. With increasing confining pressure, the permeability might drop up to two orders of magnitude, which supports the possibility of large coseismic fluid pulses over relatively large distances along a fault. Also, a relatively small threshold could potentially increase permeability in a large volume of rock, given that previous earthquakes already damaged these rocks.

Using 3D Printing to Create Personalized Brain Models for Neurosurgical Training and Preoperative Planning.

PubMed

Ploch, Caitlin C; Mansi, Chris S S A; Jayamohan, Jayaratnam; Kuhl, Ellen

2016-06-01

Three-dimensional (3D) printing holds promise for a wide variety of biomedical applications, from surgical planning, practicing, and teaching to creating implantable devices. The growth of this cheap and easy additive manufacturing technology in orthopedic, plastic, and vascular surgery has been explosive; however, its potential in the field of neurosurgery remains underexplored. A major limitation is that current technologies are unable to directly print ultrasoft materials like human brain tissue. In this technical note, the authors present a new technology to create deformable, personalized models of the human brain. The method combines 3D printing, molding, and casting to create a physiologically, anatomically, and tactilely realistic model based on magnetic resonance images. Created from soft gelatin, the model is easy to produce, cost-efficient, durable, and orders of magnitude softer than conventionally printed 3D models. The personalized brain model cost $50, and its fabrication took 24 hours. In mechanical tests, the model stiffness (E = 25.29 ± 2.68 kPa) was 5 orders of magnitude softer than common 3D printed materials, and less than an order of magnitude stiffer than mammalian brain tissue (E = 2.64 ± 0.40 kPa). In a multicenter surgical survey, model size (100.00%), visual appearance (83.33%), and surgical anatomy (81.25%) were perceived as very realistic. The model was perceived as very useful for patient illustration (85.00%), teaching (94.44%), learning (100.00%), surgical training (95.00%), and preoperative planning (95.00%). With minor refinements, personalized, deformable brain models created via 3D printing will improve surgical training and preoperative planning with the ultimate goal to provide accurate, customized, high-precision treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

Higher-order clustering in networks

NASA Astrophysics Data System (ADS)

Yin, Hao; Benson, Austin R.; Leskovec, Jure

2018-05-01

A fundamental property of complex networks is the tendency for edges to cluster. The extent of the clustering is typically quantified by the clustering coefficient, which is the probability that a length-2 path is closed, i.e., induces a triangle in the network. However, higher-order cliques beyond triangles are crucial to understanding complex networks, and the clustering behavior with respect to such higher-order network structures is not well understood. Here we introduce higher-order clustering coefficients that measure the closure probability of higher-order network cliques and provide a more comprehensive view of how the edges of complex networks cluster. Our higher-order clustering coefficients are a natural generalization of the traditional clustering coefficient. We derive several properties about higher-order clustering coefficients and analyze them under common random graph models. Finally, we use higher-order clustering coefficients to gain new insights into the structure of real-world networks from several domains.

Skinner-Rusk unified formalism for higher-order systems

NASA Astrophysics Data System (ADS)

Prieto-Martínez, Pedro Daniel; Román-Roy, Narciso

2012-07-01

The Lagrangian-Hamiltonian unified formalism of R. Skinner and R. Rusk was originally stated for autonomous dynamical systems in classical mechanics. It has been generalized for non-autonomous first-order mechanical systems, first-order and higher-order field theories, and higher-order autonomous systems. In this work we present a generalization of this formalism for higher-order non-autonomous mechanical systems.

Decree No. 515/988 creating a National Commission for Minors, Women, and the Family, 17 August 1988.

PubMed

1988-01-01

This Decree creates a National Commission for Minors, Women, and the Family, composed of the representatives of various public agencies in Uruguay. The Commission was created in order to facilitate the coordination of activities of different state institutions in analyzing international technical assistance programs relating to minors, women, and the family, as well as giving advice to the Executive. full text

HUNCH Student Culinary Competition at USSRC's Davidson Center

NASA Image and Video Library

2018-02-08

High Schools United with NASA to Create Hardware (HUNCH) students from 6 schools meet at the U.S. Space and Rocket center in order to participate in the annual culinary challenge where students create meals suitable for astronaut use in space. Students in 2018 created different dishes for breakfast dining. Other NASA centers also participate in this program with the top 10 voted recipes being judged at Johnson Space Center.

Greenhouse effect simulator - An educational application

NASA Astrophysics Data System (ADS)

Machado, Alan Freitas; Viveiros, Bruno Martins; da Silva, Claudio Elias

2016-12-01

Using the program "Modellus", we intend to create a simple simulation to show the impacts that the Greenhouse Effect might have, in a didactic and friendly way, in order to expose this notions to high and middle school students. In order to do so, we created a program that will simulate a sweep, through the Troposphere, and create two lines in a graphic, one showing the temperatures behavior, in normal conditions, and the other showing how the temperature behaves in the presence of excess of Greenhouse gases. The main purpose of the project is to use the model in schools and try to make kids more conscious of their roles in our so society, showing them the consequences of the tendency of our acts, stimulating them to be more proactives to change the future.

America's Prosperity: The Academic Success of Hispanics. Tomás Rivera Lecture Series

ERIC Educational Resources Information Center

Donado, Yvette

2014-01-01

In the 2014 Tomás Rivera lecture, Yvette Donado, Senior Vice President and Chief Administrative Officer of Educational Testing Service, discusses the need to create educational opportunities for Hispanic Americans in order to create prosperity for all Americans.

Education as a Commodity: Who Owns the Online Content Your Teachers Create?

ERIC Educational Resources Information Center

Axelson, Mary

2001-01-01

As the Internet becomes increasingly commercialized, the K-12 world will need to follow higher education's lead and define who owns a wealth of instructional information. Some companies are actively seeking to purchase teacher-created work. Teachers generally own what they create, but district policies should be in place. (MLH)

The Meaning of Higher-Order Factors in Reflective-Measurement Models

ERIC Educational Resources Information Center

Eid, Michael; Koch, Tobias

2014-01-01

Higher-order factor analysis is a widely used approach for analyzing the structure of a multidimensional test. Whenever first-order factors are correlated researchers are tempted to apply a higher-order factor model. But is this reasonable? What do the higher-order factors measure? What is their meaning? Willoughby, Holochwost, Blanton, and Blair…

A hierarchical generalization of the acoustic reciprocity theorem involving higher-order derivatives and interaction quantities.

PubMed

Lin, Ju; Li, Jie; Li, Xiaolei; Wang, Ning

2016-10-01

An acoustic reciprocity theorem is generalized, for a smoothly varying perturbed medium, to a hierarchy of reciprocity theorems including higher-order derivatives of acoustic fields. The standard reciprocity theorem is the first member of the hierarchy. It is shown that the conservation of higher-order interaction quantities is related closely to higher-order derivative distributions of perturbed media. Then integral reciprocity theorems are obtained by applying Gauss's divergence theorem, which give explicit integral representations connecting higher-order interactions and higher-order derivative distributions of perturbed media. Some possible applications to an inverse problem are also discussed.

CO-FIRING COAL, FEEDLOT, AND LITTER BIOMASS (CFB AND LFB) FUELS IN PULVERIZED FUEL AND FIXED BED BURNERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalyan Annamalai; John Sweeten; Saqib Mukhtar

2002-01-15

Intensive animal feeding operations create large amounts of animal waste that must be safely disposed of in order to avoid environmental degradation. Cattle feedlots and chicken houses are two examples. In feedlots, cattle are confined to small pens and fed a high calorie grain diet in preparation for slaughter. In chicken houses, thousands of chickens are kept in close proximity. In both of these operations, millions of tons of manure are produced every year. In this project a co-firing technology is proposed which would use manure that cannot be used for fertilizer, for power generation. Since the animal manure hasmore » economic uses as both a fertilizer and as a fuel, it is properly referred to as feedlot biomass (FB) for cow manure, or litter biomass (LB) for chicken manure. The biomass will be used a as a fuel by mixing it with coal in a 90:10 blend and firing it in existing coal fired combustion devices. This technique is known as co-firing, and the high temperatures produced by the coal will allow the biomass to be completely combusted. Therefore, it is the goal of the current research to develop an animal biomass cofiring technology. A cofiring technology is being developed by performing: (1) studies on fundamental fuel characteristics, (2) small scale boiler burner experiments, (3) gasifier experiments, (4) computer simulations, and (5) an economic analysis. The fundamental fuel studies reveal that biomass is not as high a quality fuel as coal. The biomass fuels are higher in ash, higher in moisture, higher in nitrogen and sulfur (which can cause air pollution), and lower in heat content than coal. Additionally, experiments indicate that the biomass fuels have higher gas content, release gases more readily than coal, and less homogeneous. Small-scale boiler experiments revealed that the biomass blends can be successfully fired, and NO{sub x} pollutant emissions produced will be similar to or lower than pollutant emissions when firing coal. This is a surprising result as the levels of N are higher in the biomass fuel than in coal. Further experiments showed that biomass is twice or more effective than coal when used in a reburning process to reduce NO{sub x} emissions. Since crushing costs of biomass fuels may be prohibitive, stoker firing may be cost effective; in order simulate such a firing, future work will investigate the performance of a gasifier when fired with larger sized coal and biomass. It will be a fixed bed gasifier, and will evaluate blends, coal, and biomass. Computer simulations were performed using the PCGC-2 code supplied by BYU and modified by A&M with three mixture fractions for handling animal based biomass fuels in order to include an improved moisture model for handling wet fuels and phosphorus oxidation. Finally the results of the economic analysis show that considerable savings can be achieved with the use of biomass. In the case of higher ash and moisture biomass, the fuel cost savings will be reduced, due to increased transportation costs. A spreadsheet program was created to analyze the fuel savings for a variety of different moisture levels, ash levels, and power plant operating parameters.« less

77 FR 26595 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Suspension of and Order Instituting...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

...'') resulting from a Customer order that is (1) directed to it by an order flow provider, and (2) executed by it... rebates, which attracts additional Customer order flow to the Exchange and benefits all market... Customer Rebate for Adding Liquidity from $0.30 per contract to $0.32 per contract; (2) created a new...

Parent Involvement: "The Key to Quality Education."

ERIC Educational Resources Information Center

Martinez, Jesus

The paper briefly describes Project PADRES (Parents and Auxiliary Development Resources in Education Services), a program designed to create a partnership between parents and school representatives in order to improve educational services to limited English proficient students; and discusses parent involvement with the school. To create the…

Ionic Conductivity Increased by Two Orders of Magnitude in Micrometer-Thick Vertical Yttria-Stabilized ZrO 2 Nanocomposite Films

DOE PAGES

Lee, Shinbuhm; Zhang, Wenrui; Khatkhatay, Fauzia; ...

2015-09-03

We design and create a unique cell geometry of templated micrometer-thick epitaxial nanocomposite films which contain ~20 nm diameter yttria-stabilized ZrO 2 (YSZ) nanocolumns, strain coupled to a SrTiO 3 matrix. We also enhanced the ionic conductivity of these nanocolumnsby over 2 orders of magnitude compared to plain YSZ films. Concomitant with the higher ionic conduction is the finding that the YSZ nanocolumns in the films have much higher crystallinity and orientation, compared to plain YSZ films. Hence, “oxygen migration highways” are formed in the desired out-of-plane direction. This improved structure is shown to originate from the epitaxial coupling ofmore » the YSZ nanocolumns to the SrTiO 3 film matrix and from nucleation of the YSZ nanocolumns on an intermediate nanocomposite base layer of highly aligned Sm-doped CeO 2 nanocolumns within the SrTiO 3 matrix. Furthermore, this intermediate layer reduces the lattice mismatch between the YSZ nanocolumns and the substrate. Vertical ionic conduction values as high as 10 –2 Ω –1 cm –1 were demonstrated at 360 °C (300 °C lower than plain YSZ films), showing the strong practical potential of these nanostructured films for use in much lower operation temperature ionic devices.« less

A Comprehensive Investigation and Coupler Design for Higher-Order Modes in the BNL Energy Recovery Linear Accelerator

NASA Astrophysics Data System (ADS)

Marques, Carlos

A next generation Energy Recovery Linac (ERL) is under development in the Collider-Accelerator Department at Brookhaven National Laboratory (BNL). This ERL uses a superconducting radio frequency (SFR) cavity to produce an electric field gradient ideal to accelerate charged particles. As with many accelerators, higher-order modes (HOMs) can be induced by a beam of charged particles traversing the linear accelerator cavity. The excitation of these modes can result in problematic single and multi-bunch effects and also produce undesirable heat loads to the cryogenic system. Understanding HOM prevalence and structure inside the accelerator cavity is crucial for devising a procedure for extracting HOM power and promoting excellent beam quality. In this work, a method was created to identify and characterize HOMs using a perturbation technique on a copper (Cu) cavity prototype of the BNL3 linac and a double lambda/4 crab cavity. Both analyses and correlation between simulated and measured results are shown. A coaxial to dual-ridge waveguide HOM coupler was designed, constructed and implemented to extract power from HOMs simultaneously making an evanescent fundamental mode for the BNL3 cavity. A full description of the design is given along with a simulated analysis of its performance. Comparison between previous HOM coupler designs as well as correspondence between simulation and measurement is also given.

Sexual minority women's experiences of sexual pressure: a qualitative investigation of recipients' and initiators' reports.

PubMed

Budge, Stephanie L; Keller, Bethany L; Sherry, Alissa R

2015-05-01

Sexual pressure can have detrimental effects to individuals both physically and emotionally; however, research in this area is lacking regarding the experiences by lesbian, gay, bisexual, queer, and questioning (LGBQ) women. This online study qualitatively examined sexual pressure experienced and explained by LGBQ women (n = 50) using grounded theory methodology. Participants responded to open-ended questions by providing perspectives from both those who were on the receiving end of the sexual pressure (recipients) and from those who pressured their partners (initiators). Results indicated that there were eight overarching themes, 43 higher order categories, and 241 line-by-line codes. The eight overarching themes included: Reasons to Not Want Sex, Reasons for Pressuring, Reasons for Giving In, Actions of Initiators, Expectations, Communication, Negative Outcomes, and Positive Reactions. Negative Outcomes was the most common theme endorsed. Several higher order categories indicated the unique experiences of sexual minority women, namely trying to be "normal" (e.g., engaging in sexual acts as a result of internalized homophobia), experiencing more pressure from men, and self-consciousness (specifically related to lack of knowledge about sex with women). Implications for the current study include the importance of addressing sexual pressure with sexual minority women and creating interventions, such as assertiveness training and communication skills, that could assist both recipients and initiators with engaging in mutually satisfactory sexual practices.

A Very High Order, Adaptable MESA Implementation for Aeroacoustic Computations

NASA Technical Reports Server (NTRS)

Dydson, Roger W.; Goodrich, John W.

2000-01-01

Since computational efficiency and wave resolution scale with accuracy, the ideal would be infinitely high accuracy for problems with widely varying wavelength scales. Currently, many of the computational aeroacoustics methods are limited to 4th order accurate Runge-Kutta methods in time which limits their resolution and efficiency. However, a new procedure for implementing the Modified Expansion Solution Approximation (MESA) schemes, based upon Hermitian divided differences, is presented which extends the effective accuracy of the MESA schemes to 57th order in space and time when using 128 bit floating point precision. This new approach has the advantages of reducing round-off error, being easy to program. and is more computationally efficient when compared to previous approaches. Its accuracy is limited only by the floating point hardware. The advantages of this new approach are demonstrated by solving the linearized Euler equations in an open bi-periodic domain. A 500th order MESA scheme can now be created in seconds, making these schemes ideally suited for the next generation of high performance 256-bit (double quadruple) or higher precision computers. This ease of creation makes it possible to adapt the algorithm to the mesh in time instead of its converse: this is ideal for resolving varying wavelength scales which occur in noise generation simulations. And finally, the sources of round-off error which effect the very high order methods are examined and remedies provided that effectively increase the accuracy of the MESA schemes while using current computer technology.

Cavity magnon polaritons with lithium ferrite and three-dimensional microwave resonators at millikelvin temperatures

NASA Astrophysics Data System (ADS)

Goryachev, Maxim; Watt, Stuart; Bourhill, Jeremy; Kostylev, Mikhail; Tobar, Michael E.

2018-04-01

Single crystal lithium ferrite (LiFe) spheres of sub-mm dimension are examined at mK temperatures, microwave frequencies, and variable dc magnetic field, for use in hybrid quantum systems and condensed matter and fundamental physics experiments. Strong coupling regimes of the photon-magnon interaction (cavity magnon polariton quasiparticles) were observed with coupling strength of up to 250 MHz at 9.5 GHz (2.6%) with magnon linewidths of order 4 MHz (with potential improvement to sub-MHz values). We show that the photon-magnon coupling can be significantly improved and exceed that of the widely used yttrium iron garnet crystal, due to the small unit cell of LiFe, allowing twice the spins per unit volume. Magnon mode softening was observed at low dc fields and, combined with the normal Zeeman effect, creates magnon spin-wave modes that are insensitive to first-order magnetic-field fluctuations. This effect is observed in the Kittel mode at 5.5 GHz (and another higher order mode at 6.5 GHz) with a dc magnetic field close to 0.19 tesla. We show that if the cavity is tuned close to this frequency, the magnon polariton particles exhibit an enhanced range of strong coupling and insensitivity to magnetic field fluctuations with both first-order and second-order insensitivity to magnetic field as a function of frequency (double magic point clock transition), which could potentially be exploited in cavity QED experiments.

Strategic Planning for the Air Force. Leveraging Business Planning Insights to Create Future Value

DTIC Science & Technology

1998-01-01

Strategic Planning for the Air Force Leveraging Business Planning Insights to Create Future Value DEBORAH L. WESTPHAL, RICHARD SZAFRANSKI...SUBTITLE Strategic Planning for the Air Force. Leveraging Business Planning Insights to Create Future Value 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...can be so, unless leaders and planners are willing to think in the boundary between order and chaos. Long-Range Planning, Strategic Thinking, or

Subharmonic resonances in high-order wave mixing in the quantized atomic motion in a one-dimensional optical lattice

NASA Astrophysics Data System (ADS)

Lopez, J. P.; de Almeida, A. J. F.; Tabosa, J. W. R.

2018-03-01

We report on the observation of subharmonic resonances in high-order wave mixing associated with the quantized vibrational levels of atoms trapped in a one-dimensional optical lattice created by two intense nearly counterpropagating coupling beams. These subharmonic resonances, occurring at ±1 /2 and ±1 /3 of the frequency separation between adjacent vibrational levels, are observed through phase-match angularly resolved six- and eight-wave mixing processes. We investigate how these resonances evolve with the intensity of the incident probe beam, which couples with one of the coupling beams to create anharmonic coherence gratings between adjacent vibrational levels. Our experimental results also show evidence of high-order processes associated with coherence involving nonadjacent vibrational levels. Moreover, we also demonstrate that these induced high-order coherences can be stored in the medium and the associated optical information retrieved after a controlled storage time.

Advancing Teacher Development: Institutions of Higher Education Use the NBPTS Standards To Create Communities for Professional Learning.

ERIC Educational Resources Information Center

National Board for Professional Teaching Standards, Arlington, VA.

This monograph presents eight cases of schools, colleges, and departments of education (SCDEs) in which faculty members are creating experiences in teacher education that are standards-based, elevate the conversation about the profession among teachers, and create more coherent wholeness in which being an educator includes membership in a distinct…

Background: What the States Created

ERIC Educational Resources Information Center

Cox, James C.

2009-01-01

Prior to 2003, virtual universities were being created at a rate that would question the usual perception that higher education rarely changed, or changed (if at all) at a glacial speed. No comprehensive study of what was actually being created had been done; nor had anyone tapped the experiences of the developers in the states to see what was…

Creating Social Connections in Higher Education: Insights from the Campus Canines Program at the University of Pittsburgh

ERIC Educational Resources Information Center

Camaioni, Nicole

2013-01-01

The overall purpose of this study was to capture the relationships made during the Campus Canines Program, an animal-assisted activity program, at the University of Pittsburgh. Meaningful social relationships create greater educational satisfaction. These social relationships are an important piece to creating and sustaining student involvement,…

Residential immersive life skills programs for youth with disabilities: service providers' perceptions of change processes.

PubMed

King, Gillian; McPherson, Amy; Kingsnorth, Shauna; Stewart, Debra; Glencross-Eimantas, Tanya; Jones-Galley, Kimberlea; Morrison, Andrea; Isihi, Ana Maria; Gorter, Jan Willem

2015-05-01

Residential immersive life skills (RILS) programs are designed to equip youth with physical disabilities with the foundational life skills required to assume adult roles. The objective was to determine RILS service providers' perceptions of the active ingredients of the intervention change process. Thirty-seven service providers from various disciplines completed measures to assess expertise status and participated in qualitative interviews. Qualitative themes were derived, and similarities and differences in themes were identified for blinded groups of novices, intermediates, and experts. The three main themes, reflecting change processes, were: (a) creating a supportive program atmosphere with multiple opportunities for learning, (b) using strategies to support, encourage, and engage youth, and (c) intentionally fostering youth experiences of skill development, social interaction, and pride in accomplishment. In contrast to the novices, experts displayed a more holistic perspective and paid attention to higher-order issues such as providing opportunities and enabling youth. The findings indicate how RILS service providers work to create a program atmosphere and employ strategies to intentionally foster particular youth experiences. The findings explicate service providers' theories of practice, the intentional design of RILS program environments to bring about client change, and the value of service provider expertise. Implications for Rehabilitation Service providers of youth independence-oriented life skills programs can intentionally create a learning-oriented and supportive program atmosphere by using non-directive, coaching/guiding, and engagement strategies Youth experiences of skill development, shared experience with others, and pride in accomplishment can be cultivated by providing a range of learning opportunities, including choice making, problem-solving, and skill mastery Compared to more novice service providers, experts discussed managing the program conditions and context, creating opportunities for choice and new experiences, and adopting a facilitating and enabling role (coaching and capitalizing on teachable moments).

75 FR 52560 - Self-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

...-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate Effectiveness of Proposed... and then cancelled totals 500 orders or more in a particular calendar month (the ``500 Order Threshold''). The Exchange proposes to modify the calculation of the 500 Order Threshold by creating two separate...

78 FR 51242 - Self-Regulatory Organizations; Topaz Exchange, LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

..., firms internalizing customer orders are also able to generate payment for order flow (``PFOF'') fees of... provide incentives for market participants to submit customer order flow to the Exchange and thus, creates... to the following class of market participants: (i) Customer, (ii) Professional, (iii) Firm, (iv) Non...

3 CFR 13519 - Executive Order 13519 of November 17, 2009. Establishment of the Financial Fraud Enforcement Task...

Code of Federal Regulations, 2010 CFR

2010-01-01

...; (m) the Federal Housing Finance Agency; (n) the Office of Thrift Supervision; (o) the Office of the... outreach with representatives of financial institutions, corporate entities, nonprofit organizations, State... Corporate Fraud Task Force created by Executive Order 13271 of July 9, 2002. Executive Order 13271 is hereby...

43 CFR 3485.2 - Royalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., except those created in order to finance a mine, shall not be created by a Federal lease transfer or... and location of the mine; a map showing the extent of the existing, proposed or adjoining mining... entire mine, the income from the sale of coal, and all facts indicating whether the mine can be...

43 CFR 3485.2 - Royalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., except those created in order to finance a mine, shall not be created by a Federal lease transfer or... and location of the mine; a map showing the extent of the existing, proposed or adjoining mining... entire mine, the income from the sale of coal, and all facts indicating whether the mine can be...

ZERO WASTE BIODIESEL: USING GLYCERIN AND BIOMASS TO CREATE RENEWABLE ENERGY

EPA Science Inventory

The procedure for the creation of pellets is fairly mundane, however crucial, in order to create a standard and repeatable process. The pellets biomass material are mixed by weight ratio, and blended to a consistent particulate size. The glycerin to biomass ratio by weight is ...

Seizing Opportunity: "Opportunity as Transformation"

ERIC Educational Resources Information Center

Williams, Michael; Muller, Esther

2012-01-01

Opportunity creates conditions for achievement. We learn daily of the success of others that resulted from conditions they created through opportunity. Often these conditions of opportunity are the product of a compelling vision of a future steeped in possibility and rich in reward. These visions, however, must be operationalized in order to be…

Extending the "Knowledge Advantage": Creating Learning Chains

ERIC Educational Resources Information Center

Maqsood, Tayyab; Walker, Derek; Finegan, Andrew

2007-01-01

Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…

Transitions between Central and Peripheral Vision Create Spatial/Temporal Distortions: A Hypothesis Concerning the Perceived Break of the Curveball

PubMed Central

Shapiro, Arthur; Lu, Zhong-Lin; Huang, Chang-Bing; Knight, Emily; Ennis, Robert

2010-01-01

Background The human visual system does not treat all parts of an image equally: the central segments of an image, which fall on the fovea, are processed with a higher resolution than the segments that fall in the visual periphery. Even though the differences between foveal and peripheral resolution are large, these differences do not usually disrupt our perception of seamless visual space. Here we examine a motion stimulus in which the shift from foveal to peripheral viewing creates a dramatic spatial/temporal discontinuity. Methodology/Principal Findings The stimulus consists of a descending disk (global motion) with an internal moving grating (local motion). When observers view the disk centrally, they perceive both global and local motion (i.e., observers see the disk's vertical descent and the internal spinning). When observers view the disk peripherally, the internal portion appears stationary, and the disk appears to descend at an angle. The angle of perceived descent increases as the observer views the stimulus from further in the periphery. We examine the first- and second-order information content in the display with the use of a three-dimensional Fourier analysis and show how our results can be used to describe perceived spatial/temporal discontinuities in real-world situations. Conclusions/Significance The perceived shift of the disk's direction in the periphery is consistent with a model in which foveal processing separates first- and second-order motion information while peripheral processing integrates first- and second-order motion information. We argue that the perceived distortion may influence real-world visual observations. To this end, we present a hypothesis and analysis of the perception of the curveball and rising fastball in the sport of baseball. The curveball is a physically measurable phenomenon: the imbalance of forces created by the ball's spin causes the ball to deviate from a straight line and to follow a smooth parabolic path. However, the curveball is also a perceptual puzzle because batters often report that the flight of the ball undergoes a dramatic and nearly discontinuous shift in position as the ball nears home plate. We suggest that the perception of a discontinuous shift in position results from differences between foveal and peripheral processing. PMID:20967247

Conceptualizing and Assessing Higher-Order Thinking in Reading

ERIC Educational Resources Information Center

Afflerbach, Peter; Cho, Byeong-Young; Kim, Jong-Yun

2015-01-01

Students engage in higher-order thinking as they read complex texts and perform complex reading-related tasks. However, the most consequential assessments, high-stakes tests, are currently limited in providing information about students' higher-order thinking. In this article, we describe higher-order thinking in relation to reading. We provide a…

Far and Wide - Microbial Bebop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter Larsen

2012-10-01

This musical composition was created from data of microbes (bacteria, algae and other microorganisms) sampled in the English Channel. Argonne National Laboratory biologist Peter Larsen created the songs as a unique way to present and comprehend large datasets. Microbial species of the Order Rickettsiales, such as the highly abundant, free-living planktonic species Pelagibacter ubique, are typical highly abundant taxa in L4 Station data. Its relative abundance in the microbial community at L4 Station follows a distinctive seasonal pattern. In this composition, there are two chords per measure, generated from photosynthetically active radiation measurements and temperature. The melody of each measuremore » is six notes that describe the relative abundance of the Order Rickettsiales. The first note of each measure is from the relative abundance at a time point. The next five notes of a measure follow one of the following patterns: a continuous rise in pitch, a continuous drop in pitch, a rise then drop in pitch, or a drop then rise in pitch. These patterns are matched to the relative abundance of Rickettsiales at the given time point, relative to the previous and subsequent time points. The pattern of notes in a measure is mapped to the relative abundance of Rickettsiales with fewer rests per measure indicating higher abundance. For time points at which Rickettsiales was the most abundant microbial taxa, the corresponding measure is highlighted with a cymbal crash. More information at http://www.anl.gov/articles/songs-key... Image: Diatoms under a microscope: These tiny phytoplankton are encased within a silicate cell wall. Credit: Prof. Gordon T. Taylor, Stony Brook University« less

Using Hybrid Techniques for Generating Watershed-scale Flood Models in an Integrated Modeling Framework

NASA Astrophysics Data System (ADS)

Saksena, S.; Merwade, V.; Singhofen, P.

2017-12-01

There is an increasing global trend towards developing large scale flood models that account for spatial heterogeneity at watershed scales to drive the future flood risk planning. Integrated surface water-groundwater modeling procedures can elucidate all the hydrologic processes taking part during a flood event to provide accurate flood outputs. Even though the advantages of using integrated modeling are widely acknowledged, the complexity of integrated process representation, computation time and number of input parameters required have deterred its application to flood inundation mapping, especially for large watersheds. This study presents a faster approach for creating watershed scale flood models using a hybrid design that breaks down the watershed into multiple regions of variable spatial resolution by prioritizing higher order streams. The methodology involves creating a hybrid model for the Upper Wabash River Basin in Indiana using Interconnected Channel and Pond Routing (ICPR) and comparing the performance with a fully-integrated 2D hydrodynamic model. The hybrid approach involves simplification procedures such as 1D channel-2D floodplain coupling; hydrologic basin (HUC-12) integration with 2D groundwater for rainfall-runoff routing; and varying spatial resolution of 2D overland flow based on stream order. The results for a 50-year return period storm event show that hybrid model (NSE=0.87) performance is similar to the 2D integrated model (NSE=0.88) but the computational time is reduced to half. The results suggest that significant computational efficiency can be obtained while maintaining model accuracy for large-scale flood models by using hybrid approaches for model creation.

The prevalence and effect of burnout on graduate healthcare students

PubMed Central

Bullock, Garrett; Kraft, Lynnea; Amsden, Katherine; Gore, Whitney; Prengle, Bobby; Wimsatt, Jeffrey; Ledbetter, Leila; Covington, Kyle; Goode, Adam

2017-01-01

Burnout is a growing epidemic among professional healthcare students. Unaddressed burnout has been shown to have psychological and performance related detriments. The purpose of this scoping literature review was to investigate the prevalence of burnout and its effects on the psychological, professional, empathetic ability, and academic acuity of graduate healthcare students. Inclusion criteria included English language papers published within the last 10 years and subjects in graduate healthcare professional programs. This search encompassed 8,214 articles. After title and abstract screening, 127 articles remained and were sorted into five domains of interest: etiology, professionalism, mental health, empathy, and academic performance. After duplicates were removed, 27 articles remained for the scoping review. Graduate level healthcare students had higher levels of burnout than age matched peers and the general population. The high prevalence of burnout within graduate healthcare students can have an effect on their mental health, empathy, and professional conduct. Understanding the occurrence and effects of burnout within graduate healthcare programs allows faculty and administration to plan curriculum, and provide information to students to understand, recognize, and create opportunities to decrease burnout in order to create long lasting quality clinicians. PMID:29098051

Pre- and post-processing for Cosmic/NASTRAN on personal computers and mainframes

NASA Technical Reports Server (NTRS)

Kamel, H. A.; Mobley, A. V.; Nagaraj, B.; Watkins, K. W.

1986-01-01

An interface between Cosmic/NASTRAN and GIFTS has recently been released, combining the powerful pre- and post-processing capabilities of GIFTS with Cosmic/NASTRAN's analysis capabilities. The interface operates on a wide range of computers, even linking Cosmic/NASTRAN and GIFTS when the two are on different computers. GIFTS offers a wide range of elements for use in model construction, each translated by the interface into the nearest Cosmic/NASTRAN equivalent; and the options of automatic or interactive modelling and loading in GIFTS make pre-processing easy and effective. The interface itself includes the programs GFTCOS, which creates the Cosmic/NASTRAN input deck (and, if desired, control deck) from the GIFTS Unified Data Base, COSGFT, which translates the displacements from the Cosmic/NASTRAN analysis back into GIFTS; and HOSTR, which handles stress computations for a few higher-order elements available in the interface, but not supported by the GIFTS processor STRESS. Finally, the versatile display options in GIFTS post-processing allow the user to examine the analysis results through an especially wide range of capabilities, including such possibilities as creating composite loading cases, plotting in color and animating the analysis.

High-field modulated ion-selective field-effect-transistor (FET) sensors with sensitivity higher than the ideal Nernst sensitivity.

PubMed

Chen, Yi-Ting; Sarangadharan, Indu; Sukesan, Revathi; Hseih, Ching-Yen; Lee, Geng-Yen; Chyi, Jen-Inn; Wang, Yu-Lin

2018-05-29

Lead ion selective membrane (Pb-ISM) coated AlGaN/GaN high electron mobility transistors (HEMT) was used to demonstrate a whole new methodology for ion-selective FET sensors, which can create ultra-high sensitivity (-36 mV/log [Pb 2+ ]) surpassing the limit of ideal sensitivity (-29.58 mV/log [Pb 2+ ]) in a typical Nernst equation for lead ion. The largely improved sensitivity has tremendously reduced the detection limit (10 -10  M) for several orders of magnitude of lead ion concentration compared to typical ion-selective electrode (ISE) (10 -7  M). The high sensitivity was obtained by creating a strong filed between the gate electrode and the HEMT channel. Systematical investigation was done by measuring different design of the sensor and gate bias, indicating ultra-high sensitivity and ultra-low detection limit obtained only in sufficiently strong field. Theoretical study in the sensitivity consistently agrees with the experimental finding and predicts the maximum and minimum sensitivity. The detection limit of our sensor is comparable to that of Inductively-Coupled-Plasma Mass Spectrum (ICP-MS), which also has detection limit near 10 -10  M.

LED Context Lighting System in Residential Areas

PubMed Central

Im, Kyoung-Mi

2014-01-01

As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context. PMID:25101325

Contextualising change through a common strategy: Lecturers' perceptions and key role in supporting academic reform

NASA Astrophysics Data System (ADS)

Kindelan, Paz; Martin, Ana

2014-05-01

European universities are currently going through a process of change in order to meet the common goals set for higher education by the European Commission. They are revising their educational models to adjust them to the guidelines of the "Bologna Process" and are devising an institutional strategy for its implementation. In practical terms, this means aligning former national degrees and diplomas to standard European Bachelor and Masters degrees and PhD doctorates, by creating acknowledged professional qualification benchmarks that also include adjusted course lengths and contents. This process, in the end, mostly affects academic staff members who have a fundamental role to play in carrying out the pedagogical reforms on the teaching front. Besides presenting a commentary on the institutional approach of one particular technical university in Spain, the purpose of this paper is to propose, from the authors' point of view as lecturers, a strategy which has the potential to create a favourable atmosphere for carrying out such a reform. The article's main objective is to highlight a series of action points which may serve to reinforce and advance the main institutional strategy by relying on the powerful influence of its academic staff members.

Active Solution Space and Search on Job-shop Scheduling Problem

NASA Astrophysics Data System (ADS)

Watanabe, Masato; Ida, Kenichi; Gen, Mitsuo

In this paper we propose a new searching method of Genetic Algorithm for Job-shop scheduling problem (JSP). The coding method that represent job number in order to decide a priority to arrange a job to Gannt Chart (called the ordinal representation with a priority) in JSP, an active schedule is created by using left shift. We define an active solution at first. It is solution which can create an active schedule without using left shift, and set of its defined an active solution space. Next, we propose an algorithm named Genetic Algorithm with active solution space search (GA-asol) which can create an active solution while solution is evaluated, in order to search the active solution space effectively. We applied it for some benchmark problems to compare with other method. The experimental results show good performance.

Investigation of vertical transportation of Cs-137 in the different soil types and for the different raining regime

NASA Astrophysics Data System (ADS)

Varinlioglu, Ahmet; Tugrul, A. Beril

2018-02-01

Cs-137 is an important fission product that is produced in the nuclear reactors. Therefore it can create risk for the environment during the accident condition of the nuclear plants. In this study, vertical transportation of Cs-137 in the soil searched for three different soil types and three different raining regimes. The experiments observed in lyzimetric conditions in the laboratory. The results of the experiments show that in every raining regime the activities of different types of soils (sand, loam and clay) were related with descending activity order. When the results of the experiments were evaluated according to the raining regime it can be seen that the relative activity for every type of soil is always towards higher to lower raining conditions.

Pretest online discussion groups to augment teaching and learning.

PubMed

Kuhn, Jonathan; Hasbargen, Barbara; Miziniak, Halina

2010-01-01

Tests and final examination scores of three semesters of control students in a nursing foundation course were compared with tests and final examination scores of three semesters of participating students. Participating students were offered access to an asynchronous pretest online discussion activity with a faculty e-moderator. While the simplified Bloom's revised taxonomy assisted in creating appropriate preparatory test and final examination questions for pretest online discussion, Salmon's five-stage online method provided direction to the e-moderator on how to encourage students to achieve Bloom's higher-order thinking skills during the pretest online discussions. Statistical analysis showed the pretest online discussion activity had a generally positive impact on tests and final examination scores, when controlling for a number of possible confounding variables, including instructor, cumulative grade point average, age, and credit hours.

Surface charge method for molecular surfaces with curved areal elements I. Spherical triangles

NASA Astrophysics Data System (ADS)

Yu, Yi-Kuo

2018-03-01

Parametrizing a curved surface with flat triangles in electrostatics problems creates a diverging electric field. One way to avoid this is to have curved areal elements. However, charge density integration over curved patches appears difficult. This paper, dealing with spherical triangles, is the first in a series aiming to solve this problem. Here, we lay the ground work for employing curved patches for applying the surface charge method to electrostatics. We show analytically how one may control the accuracy by expanding in powers of the the arc length (multiplied by the curvature). To accommodate not extremely small curved areal elements, we have provided enough details to include higher order corrections that are needed for better accuracy when slightly larger surface elements are used.

Construction of a restriction map and gene map of the lettuce chloroplast small single-copy region using Southern cross-hybridization.

PubMed

Mitchelson, K R

1996-01-01

The small single-copy region (SSCR) of the chloroplast genome of many higher plants typically contain ndh genes encoding proteins that share homology with subunits of the respiratory-chain reduced nicotinamide adenine dinucleotide (NADH) dehydrogenase complex of mitochondria. A map of the lettuce chloroplast SSCR has been determined by Southern cross-hybridization, taking advantage of the high degree of homology between a tobacco small single-copy fragment and a corresponding lettuce chloroplast fragment. The gene order of the SSCR of lettuce and tobacco chloroplasts is similar. The cross-hybridization method can rapidly create a primary gene map of unknown chloroplast fragments, thus providing detailed information of the localization and arrangement of genes and conserved open reading frame regions.

The receiving simplification partnership: a win-win approach to better service and higher profitability.

PubMed

Beech, W D; Berg, R C

1999-02-01

To achieve competitive advantage, customers and suppliers are increasingly forming logistics partnerships to improve supply chain performance and reduce costs. The partnerships are typically motivated by the need to solve a particular problem, but with attention and open communication, new program ideas can develop, sometimes even breakthrough concepts. During the course of their partnership, Avery Dennison and United Stationers created a program that dramatically simplifies and speeds receiving and put-away of shipments with the aim of reducing workloads, improving service, and increasing profitability. The program involves optimizing order quantity increments to full-pallet, layer, and case volumes based on demand and warehouse configurations. Within six weeks, the results included a 50 percent reduction in shipment line items and 92 percent fewer put-away pieces, despite unchanged inventory levels.

Absorbing metasurface created by diffractionless disordered arrays of nanoantennas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chevalier, Paul; Minao, Laboratoire de Photonique et Nanostructures; Bouchon, Patrick, E-mail: patrick.bouchon@onera.fr

2015-12-21

We study disordered arrays of metal-insulator-metal nanoantenna in order to create a diffractionless metasurface able to absorb light in the 3–5 μm spectral range. This study is conducted with angle-resolved reflectivity measurements obtained with a Fourier transform infrared spectrometer. A first design is based on a perturbation of a periodic arrangement, leading to a significant reduction of the radiative losses. Then, a random assembly of nanoantennas is built following a Poisson-disk distribution of given density, in order to obtain a nearly perfect cluttered assembly with optical properties of a homogeneous material.

Shaping non-diffracting beams with a digital micromirror device

NASA Astrophysics Data System (ADS)

Ren, Yu-Xuan; Fang, Zhao-Xiang; Lu, Rong-De

2016-02-01

The micromechanical digital micromirror device (DMD) performs as a spatial light modulator to shape the light wavefront. Different from the liquid crystal devices, which use the birefringence to modulate the light wave, the DMD regulates the wavefront through an amplitude modulation with the digitally controlled mirrors switched on and off. The advantages of such device are the fast speed, polarization insensitivity, and the broadband modulation ability. The fast switching ability for the DMD not only enables the shaping of static light mode, but also could dynamically compensate for the wavefront distortion due to scattering medium. We have employed such device to create the higher order modes, including the Laguerre-Gaussian, Hermite-Gaussian, as well as Mathieu modes. There exists another kind of beam with shape-preservation against propagation, and self-healing against obstacles. Representative modes are the Bessel modes, Airy modes, and the Pearcey modes. Since the DMD modulates the light intensity, a series of algorithms are developed to calculate proper amplitude hologram for shaping the light. The quasi-continuous gray scale images could imitate the continuous amplitude hologram, while the binary amplitude modulation is another means to create the modulation pattern for a steady light field. We demonstrate the generation of the non-diffracting beams with the binary amplitude modulation via the DMD, and successfully created the non-diffracting Bessel beam, Airy beam, and the Pearcey beam. We have characterized the non-diffracting modes through propagation measurements as well as the self-healing measurements.

Aerogel to simulate delamination and porosity defects in carbon-fiber reinforced polymer composites

NASA Astrophysics Data System (ADS)

Juarez, Peter; Leckey, Cara A. C.

2018-04-01

Representative defect standards are essential for the validation and calibration of new and existing inspection techniques. However, commonly used methods of simulating delaminations in carbon-fiber reinforced polymer (CFRP) composites do not accurately represent the behavior of the real-world defects for several widely-used NDE techniques. For instance, it is common practice to create a delamination standard by inserting Polytetrafluoroethylene (PTFE) in between ply layers. However, PTFE can transmit more ultrasonic energy than actual delaminations, leading to an unrealistic representation of the defect inspection. PTFE can also deform/wrinkle during the curing process and has a thermal effusivity two orders of magnitude higher than air (almost equal to that of a CFRP). It is therefore not effective in simulating a delamination for thermography. Currently there is also no standard practice for producing or representing a known porosity in composites. This paper presents a novel method of creating delamination and porosity standards using aerogel. Insertion of thin sheets of solid aerogel between ply layers during layup is shown to produce air-gap-like delaminations creating realistic ultrasonic and thermographic inspection responses. Furthermore, it is shown that depositing controlled amounts of aerogel powder can represent porosity. Micrograph data verifies the structural integrity of the aerogel through the composite curing process. This paper presents data from multiple NDE methods, including X-ray computed tomography, immersion ultrasound, and flash thermography to the effectiveness of aerogel as a delamination and porosity simulant.

Gender subordination in the vulnerability of women to domestic violence.

PubMed

Macedo Piosiadlo, Laura Christina; Godoy Serpa da Fonseca, Rosa Maria

2016-06-01

To create and validate an instrument that identifies women's vulnerability to domestic violence through gender subordination indicators in the family. An instrument consisting on 61 phrases was created, that indicates gender subordination in the family. After the assessment from ten judges, 34 phrases were validated. The approved version was administered to 321 health service users of São José dos Pinhais (Estado de Paraná, Brasil), along with the validated Portuguese version of the Abuse Assessment Screen (AAS) (for purposes of separating the sample group - the ''YES'' group was composed of women who have suffered violence and the ''NO'' group consisted of women who had not suffered violence). Data were transferred into the Statistical Package for the Social Sciences (SPSS) software, version 22, and quantitatively analyzed using exploratory and factor analysis, and tests for internal consistency. After analysis (Kaiser-Meyer-Olkin (KMO) statistics, Monte Carlo Principal Components Analysis (PCA, and diagram segmentation), two factors were identified: F1 - consisting of phrases related to home maintenance and family structure; F2 - phrases intrinsic to the couple's relationship. For the statements that reinforce gender subordination, the mean of the factors were higher for the group that answered YES to one of the violence identifying issues. The created instrument was able to identify women who were vulnerable to domestic violence using gender subordination indicators. This could be an important tool for nurses and other professionals in multidisciplinary teams, in order to organize and plan actions to prevent violence against women.

Are faults preferential flow paths through semiarid and arid vadose zones?

NASA Astrophysics Data System (ADS)

Sigda, John M.; Wilson, John L.

2003-08-01

Numerous faults crosscut the poorly lithified, basin-fill sands found in New Mexico's Rio Grande rift and in other extensional regimes. The deformational processes that created these faults sharply reduced both fault porosity and fault saturated hydraulic conductivity by altering grains and pores, particularly in structures referred to as deformation bands. The resulting pore distribution changes, which create barriers to saturated flow, should enhance fault unsaturated flow relative to parent sand under the relatively dry conditions of the semiarid southwest. We report the first measurements of unsaturated hydraulic properties for undisturbed fault materials, using samples from a small-displacement normal fault and parent sands in the Bosque del Apache Wildlife Refuge, central New Mexico. Fault samples were taken from a narrow zone of deformation bands. The unsaturated flow apparatus (UFA) centrifuge system was used to measure both relative permeability and moisture retention curves. We compared these relations and fitted hydraulic conductivity-matric potential models to test whether the fault has significantly different unsaturated hydraulic properties than its parent sand. Saturated conductivity is 3 orders of magnitude less in the fault than the undeformed sand. As matric potential decreases from 0 to -200 cm, unsaturated conductivity decreases roughly 1 order of magnitude in the fault but 5-6 orders of magnitude in undeformed sands. Fault conductivity is greater by 2-6 orders of magnitude at matric potentials between -200 and -1000 cm, which are typical potentials for semiarid and arid vadose zones. Fault deformation bands have much higher air-entry matric potential values than parent sands and remain close to saturation well after the parent sands have begun to approach residual moisture content. Under steady state, one-dimensional, gravity-driven flow conditions, moisture transport and solute advection is 102-106 times larger in the fault material than parent sands. Faults are sufficiently conductive to hasten the downward movement of water and solutes through vadose-zone sands under semiarid and arid conditions like those in the Rio Grande rift, thereby potentially enhancing recharge, contaminant migration, and diagenesis.

Understanding the Relationships Between Architecture, Chemistry, and Energy Release of Energetic Nanocomposites

NASA Astrophysics Data System (ADS)

DeLisio, Jeffery Brandon

Energetic nanocomposites are a class of reactive material that incorporate nanosized materials or features in order to enhance reaction kinetics and energy densities. Typically, these systems employ metal nanoparticles as the fuel source and have demonstrated reactivities orders of magnitude larger than more traditionally used micron-sized metal fuels. One drawback of using nanosized metals is that the nascent oxide shell comprises a significant weight percent as the particle size decreases. This shell also complicates the understanding of oxidation mechanisms of nanosized metal fuels. In this dissertation, I apply a two-fold approach to understanding the relationships between architecture, chemistry, and energy release of energetic nanocomposites by 1) investigating alternative metal fuels to develop a deeper understanding of the reaction mechanisms of energetic nanocomposites and 2) creating unique microstructures to tailor macroscopic properties allowing for customizability of energetic performance. In order to accurately study these systems, new analytical techniques capable of high heating rate analysis were developed. The oxidation mechanisms of tantalum nanoparticles was first probed using high heating rate TEM and Temperature-Jump Time-of-Flight Mass Spectrometry (T-Jump TOFMS) and shell crystallization was found to plan an important role in the mechanism. An air-sensitive sample holder was developed and employed to analyze the decomposition and oxidation of molecular aluminum compounds, which theoretically can achieve similar energy release rates to monomolecular explosives in addition to much higher energy densities. In order to obtain simultaneous thermal and speciation data at high heating rates, a nanocalorimeter was integrated into the TOFMS system and measurements were performed on Al/CuO nanolaminates to probe the effect of bilayer thickness on energy release. An electrospray based approach to creating energetic nanocomposites with tunable architectures is also described. An in depth study on the electrospray synthesized nAl/PVDF thin film reaction mechanism was performed using T-Jump TOFMS. The nAl/PVDF system was also studied using a Molecular Beam Sampling Time-of-Flight Mass Spectrometer designed and built primarily to investigate the reaction mechanisms of energetic nanocomposites at 1 atm in both aerobic and anaerobic environments.

The Influence of the Aspheric Profiles for Transition Zone on Optical Performance of Human Eye After Conventional Ablation

NASA Astrophysics Data System (ADS)

Fang, L.

2014-12-01

The analysis in the impact of transition zone on the optical performance of human eye after laser refractive surgery is important for improving visual correction technology. By designing the ablation profiles of aspheric transition zone and creating the ablation profile for conventional refractive surgery in optical zone, the influence of aspheric transition zone on residual aberrations was studied. The results indicated that the ablation profiles of transition zone had a significant influence on the residual wavefront aberrations. For a hyperopia correction, the profile #9 shows a larger induced coma and spherical aberration when the translation of the centre of pupil remains constant. However, for a myopia astigmatism correction, the induced coma and spherical aberration in profile #1 shows relatively larger RMS values than those in other profiles. Therefore, the residual higher order aberrations may be decreased by optimizing ablation profiles of transition zone, but they cannot be eliminated. In order to achieve the best visual performance, the design of ablation pattern of transition zone played a crucial role.

Distributed and grid computing projects with research focus in human health.

PubMed

Diomidous, Marianna; Zikos, Dimitrios

2012-01-01

Distributed systems and grid computing systems are used to connect several computers to obtain a higher level of performance, in order to solve a problem. During the last decade, projects use the World Wide Web to aggregate individuals' CPU power for research purposes. This paper presents the existing active large scale distributed and grid computing projects with research focus in human health. There have been found and presented 11 active projects with more than 2000 Processing Units (PUs) each. The research focus for most of them is molecular biology and, specifically on understanding or predicting protein structure through simulation, comparing proteins, genomic analysis for disease provoking genes and drug design. Though not in all cases explicitly stated, common target diseases include research to find cure against HIV, dengue, Duchene dystrophy, Parkinson's disease, various types of cancer and influenza. Other diseases include malaria, anthrax, Alzheimer's disease. The need for national initiatives and European Collaboration for larger scale projects is stressed, to raise the awareness of citizens to participate in order to create a culture of internet volunteering altruism.

Aerodynamically induced radial forces in a centrifugal gas compressor. Part 1: Experimental measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, J.J.; Flathers, M.B.

1998-04-01

Net radial loading arising from asymmetric pressure fields in the volutes of centrifugal pumps during off-design operation is well known and has been studied extensively. In order to achieve a marked improvement in overall efficiency in centrifugal gas compressors, vaneless volute diffusers are matched to specific impellers to yield improved performance over a wide application envelope. As observed in centrifugal pumps, nonuniform pressure distributions that develop during operation above and below the design flow create static radial loads on the rotor. In order to characterize these radial forces, a novel experimental measurement and post-processing technique is employed that yields bothmore » the magnitude and direction of the load by measuring the shaft centerline locus in the tilt-pad bearings. The method is applicable to any turbomachinery operating on fluid film radial bearings equipped with proximity probes. The forces are found to be a maximum near surge and increase with higher pressures and speeds. The results are nondimensionalized, allowing the radial loading for different operating conditions to be predicted.« less

Solving regularly and singularly perturbed reaction-diffusion equations in three space dimensions

NASA Astrophysics Data System (ADS)

Moore, Peter K.

2007-06-01

In [P.K. Moore, Effects of basis selection and h-refinement on error estimator reliability and solution efficiency for higher-order methods in three space dimensions, Int. J. Numer. Anal. Mod. 3 (2006) 21-51] a fixed, high-order h-refinement finite element algorithm, Href, was introduced for solving reaction-diffusion equations in three space dimensions. In this paper Href is coupled with continuation creating an automatic method for solving regularly and singularly perturbed reaction-diffusion equations. The simple quasilinear Newton solver of Moore, (2006) is replaced by the nonlinear solver NITSOL [M. Pernice, H.F. Walker, NITSOL: a Newton iterative solver for nonlinear systems, SIAM J. Sci. Comput. 19 (1998) 302-318]. Good initial guesses for the nonlinear solver are obtained using continuation in the small parameter ɛ. Two strategies allow adaptive selection of ɛ. The first depends on the rate of convergence of the nonlinear solver and the second implements backtracking in ɛ. Finally a simple method is used to select the initial ɛ. Several examples illustrate the effectiveness of the algorithm.

Visualising higher order Brillouin zones with applications

NASA Astrophysics Data System (ADS)

Andrew, R. C.; Salagaram, T.; Chetty, N.

2017-05-01

A key concept in material science is the relationship between the Bravais lattice, the reciprocal lattice and the resulting Brillouin zones (BZ). These zones are often complicated shapes that are hard to construct and visualise without the use of sophisticated software, even by professional scientists. We have used a simple sorting algorithm to construct BZ of any order for a chosen Bravais lattice that is easy to implement in any scientific programming language. The resulting zones can then be visualised using freely available plotting software. This method has pedagogical value for upper-level undergraduate students since, along with other computational methods, it can be used to illustrate how constant-energy surfaces combine with these zones to create van Hove singularities in the density of states. In this paper we apply our algorithm along with the empirical pseudopotential method and the 2D equivalent of the tetrahedron method to show how they can be used in a simple software project to investigate this interaction for a 2D crystal. This project not only enhances students’ fundamental understanding of the principles involved but also improves transferable coding skills.

Nanoscale Morphology, Dimensional Control and Electrical Properties of Oligoanilines

PubMed Central

Wang, Yue; Tran, Henry D.; Liao, Lei; Duan, Xiangfeng; Kaner, Richard B.

2010-01-01

While nanostructures of organic conductors have generated great interest in recent years, their nanoscale size and shape control remains a significant challenge. Here we report a general method for producing a variety of oligoaniline nanostructures with well-defined morphologies and dimensionalities. 1-D nanowires, 2-D nanoribbons, and 3-D rectangular nanoplates and nanoflowers of tetraaniline are produced by a solvent exchange process in which the dopant acid can be used to tune the oligomer morphology. The process appears to be a general route for producing nanostructures for a variety of other aniline oligomers such as the phenyl-capped tetramer. X-ray diffraction of the tetraniline nanostructures reveals that they possess different packing arrangements, which results in different nanoscale morphologies with different electrical properties for the structures. The conductivity of a single tetraaniline nanostructure is up to two orders of magnitude higher than the highest previously reported value and rivals that of pressed pellets of conventional polyaniline doped with acid. Furthermore, these oligomer nanostructures can be easily processed by a number of methods in order to create thin films composed of aligned nanostructures over a macroscopic area. PMID:20662516

Schneider Membrane Elevation in Presence of Sinus Septa: Anatomic Features and Surgical Management

PubMed Central

Beretta, Mario; Cicciù, Marco; Bramanti, Ennio; Maiorana, Carlo

2012-01-01

Maxillary sinus floor elevation via a lateral approach is a predictable technique to increase bone volume of the edentulous posterior maxilla and consequently for dental implants placement. The sinus floor is elevated and it can be augmented with either autologous or xenogeneic bone grafts following an opening bone window created on the facial buccal wall. Maxillary septa are walls of cortical bone within the maxillary sinus. The septa shape has been described as an inverted gothic arch arising from the inferior or lateral walls of the sinus and may even divide the sinus into two or more cavities. Some authors have reported a higher prevalence of septa in atrophic edentulous areas than in nonatrophic ones. Radiographic identification of these structures is important in order to perform the right design of the lateral window during sinus lift. Aim of this investigation is to highlight the correct steps for doing sinus lift surgery in presence of those anatomic variations. Clinicians should always perform clinical and radiographic diagnosis in order to avoid complications related to the sinus lift surgery. PMID:22848223

Thermo-mechanical behavior of stainless steel knitted structures

NASA Astrophysics Data System (ADS)

Hamdani, Syed Talha Ali; Fernando, Anura; Maqsood, Muhammad

2016-09-01

Heating fabric is an advanced textile material that is extensively researched by the industrialists and the scientists alike. Ability to create highly flexible and drapeable heating fabrics has many applications in everyday life. This paper presents a study conducted on the comparison of heatability of knitted fabric made of stainless steel yarn. The purpose of the study is to find a suitable material for protective clothing against cold environments. In the current research the ampacity of stainless steel yarn is observed in order to prevent the overheating of the heating fabrics. The behavior of the knitted structure is studied for different levels of supply voltage. Infrared temperature sensing is used to measure the heat generated from the fabrics in order to measure the temperature of the fabrics without physical contact. It is concluded that interlock structure is one of the most suited structures for knitted heating fabrics. As learnt through this research, fabrics made of stainless steel yarn are capable of producing a higher level of heating compared to that of knitted fabric made using silver coated polymeric yarn at the same supply voltage.

Galerkin Models Enhancements for Flow Control

NASA Astrophysics Data System (ADS)

Tadmor, Gilead; Lehmann, Oliver; Noack, Bernd R.; Morzyński, Marek

Low order Galerkin models were originally introduced as an effective tool for stability analysis of fixed points and, later, of attractors, in nonlinear distributed systems. An evolving interest in their use as low complexity dynamical models, goes well beyond that original intent. It exposes often severe weaknesses of low order Galerkin models as dynamic predictors and has motivated efforts, spanning nearly three decades, to alleviate these shortcomings. Transients across natural and enforced variations in the operating point, unsteady inflow, boundary actuation and both aeroelastic and actuated boundary motion, are hallmarks of current and envisioned needs in feedback flow control applications, bringing these shortcomings to even higher prominence. Building on the discussion in our previous chapters, we shall now review changes in the Galerkin paradigm that aim to create a mathematically and physically consistent modeling framework, that remove what are otherwise intractable roadblocks. We shall then highlight some guiding design principles that are especially important in the context of these models. We shall continue to use the simple example of wake flow instabilities to illustrate the various issues, ideas and methods that will be discussed in this chapter.

Generating a stationary infinite range tractor force via a multimode optical fibre

NASA Astrophysics Data System (ADS)

Ebongue, C. A.; Holzmann, D.; Ostermann, S.; Ritsch, H.

2017-06-01

Optical fibres confine and guide light almost unattenuated and thus convey light forces to polarizable nano-particles over very long distances. Radiation pressure forces arise from scattering of guided photons into free space while gradient forces are based on coherent scattering between different fibre modes or propagation directions. Interestingly, even scattering between co-propagating modes induces longitudinal forces as the transverse confinement of the light modes creates mode dependent longitudinal wave-vectors and photon momenta. We generalize a proven scattering matrix based approach to calculate single as well as inter-particle forces to include several forward and backward propagating modes. We show that an injection of the higher order mode only in a two mode fibre will induce a stationary tractor force against the injection direction, when the mode coupling to the lower order mode dominates against backscattering and free space losses. Generically this arises for non-absorbing particles at the centre of a waveguide. The model also gives improved predictions for inter-particle forces in evanescent nanofibre fields as experimentally observed recently. Surprisingly strong tractor forces can also act on whole optically bound arrays.

Bending, force recovery, and D-cones in origami inspired model geometries

NASA Astrophysics Data System (ADS)

Eldar, Theresa; Rozairo, Damith; Croll, Andrew B.

The need for materials with advanced functionality has driven a considerable amount of modern materials science. One idea that has gained significant traction is combining of the ideas Origami and Kirigami with existing materials to build in advanced functionality. In most origami damage is induced in order to trap areas of high curvature in desirable locations in a material. However, the long term and dynamic consequences of local failure are largely unknown. In order to gauge the complex interplay of material properties, relaxation and failure in a set of model thin films, a series of bending and force recovery experiments were carried out. We focus on three materials; polydimethylsiloxane (PDMS), polycarbonate (PC), and polystyrene (PS) chosen for their varying responses to stress. We first measured the load bearing capacity of a single bend in each material, examining the force recovery of bends at various curvatures. Next we examined a doubly folded system in which a single developable cone was created in a similar manner. While the D-cone clearly has massive local consequences for each system, it plays an insignificant role in the system's overall behavior. Finally, we considered higher order combinations of d-cones, ridges and bends. AFOSR under the Young Investigator Program (FA9550-15-1-0168).

The measurement of "eating-disorder-thoughts" and "eating-disorder-behaviors": Implications for assessment and detection of eating disorders in epidemiological studies.

PubMed

Miller, Jessie L; Vaillancourt, Tracy; Hanna, Steven E

2009-04-01

To test a theoretically driven second-order factor model of eating disorders, with eating-disordered thoughts and eating-disordered behaviors representing the higher order factors, we conducted a confirmatory factor analysis using a female university student sample (N=1816). The 'Thought' latent construct was comprised of indicators representing fear of fat and dissatisfaction with body shape/weight and the latent construct 'Behavior' was comprised of indicators representing binging, purging and restricting. From the thought and behavior latent factors, composite groups were created by varying the level of thoughts and behaviors (high, moderate, and few/or none). We examined the independent contributions of thoughts and behaviors on a measure of psychopathology (depression). A second-order model of "eating disorder thoughts" and "eating disorder behaviors" was supported by the data, based on model fit, factor loadings, and model parsimony. Mean scores on depression were clinically significant for groups engaged in any level of eating disorder behavior whereas thoughts contributed to risk for depression only at the extreme end. Because of the disproportionate representation of eating disorder thoughts (high) and eating disorder behaviors (low) in non-clinical populations, the measurement and detection of eating disorders may be enhanced by measuring thoughts separate from behaviors.

75 FR 59742 - Public Land Order No. 7752; Partial Revocation of a Light Station Reservation; Washington

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... DEPARTMENT OF THE INTERIOR Bureau of Land Management [LLOR-936000-L14300000-FQ0000; HAG-09-0002; WAOR-22197 K] Public Land Order No. 7752; Partial Revocation of a Light Station Reservation; Washington...: The reservation of public land for the Lime Kiln Light Station created by an Executive Order dated...

3 CFR 13517 - Executive Order 13517 of October 30, 2009. Amendments to Executive Orders 13183 and 13494

Code of Federal Regulations, 2010 CFR

2010-01-01

... initiatives that benefit Puerto Rico; provide advice and recommendations to the President and the Congress on..., or concerning the manner of exercising, the right to organize and bargain collectively), including.... 31.205-21.” Sec. 3. This order is not intended to, and does not, create any right or benefit...

Broadband arrayed waveguide grating multiplexers on indium phosphide

NASA Astrophysics Data System (ADS)

Rausch, Kameron

2005-11-01

Coarse Wavelength Division Multiplexing (CWDM) is becoming a popular way to increase the optical throughput of fibers for short to medium haul networks at a reduced cost. The International Telecommunications Union (ITU) has defined the CWDM network to consist of eighteen channels with channel spacings of 20 nm starting at 1270 nm and ending at 1610 nm. Four and eight channel AWGs suitable for CWDM were fabricated using a versatile S-shape design novel to InP. The standard horseshoe layout will not work on semiconductor for AWGs with a free spectral range (FSR) larger than 30 nm. The AWG design provides operation insensitive to thermal and polarization fluctuations; which is key for low cost operation and packaging. It will be shown that, refractive index changes over the large operating wavelength band produced negligible effects in the transmission spectrum. Standard AWG design assumes refractive index is a constant over the operating wavelength band. As a result, the output waveguide separations are held constant on the second star coupler. As the channel number increases, secondary focal dispersion caused from a changing refractive index can have detrimental effects on performance. A new design method will be introduced which includes refractive index dispersion by allowing the output waveguide separations to vary. The new design is consistent with standard design but is applicable in materials with a linear index dispersion over an arbitrarily large wavelength band. Lastly, a method for increasing the transmission using multimode waveguides is discussed. Traditionally, single mode waveguides are required in order to prevent higher order waveguide modes creating ghost images in the output spectrum. Using bend loss and waveguide junction offsets, higher order modes can be filtered from the output, thereby eliminating ghost images and at the same time, increase transmission.

BEYOND ELLIPSE(S): ACCURATELY MODELING THE ISOPHOTAL STRUCTURE OF GALAXIES WITH ISOFIT AND CMODEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciambur, B. C., E-mail: bciambur@swin.edu.au

2015-09-10

This work introduces a new fitting formalism for isophotes that enables more accurate modeling of galaxies with non-elliptical shapes, such as disk galaxies viewed edge-on or galaxies with X-shaped/peanut bulges. Within this scheme, the angular parameter that defines quasi-elliptical isophotes is transformed from the commonly used, but inappropriate, polar coordinate to the “eccentric anomaly.” This provides a superior description of deviations from ellipticity, better capturing the true isophotal shape. Furthermore, this makes it possible to accurately recover both the surface brightness profile, using the correct azimuthally averaged isophote, and the two-dimensional model of any galaxy: the hitherto ubiquitous, but artificial,more » cross-like features in residual images are completely removed. The formalism has been implemented into the Image Reduction and Analysis Facility tasks Ellipse and Bmodel to create the new tasks “Isofit,” and “Cmodel.” The new tools are demonstrated here with application to five galaxies, chosen to be representative case-studies for several areas where this technique makes it possible to gain new scientific insight. Specifically: properly quantifying boxy/disky isophotes via the fourth harmonic order in edge-on galaxies, quantifying X-shaped/peanut bulges, higher-order Fourier moments for modeling bars in disks, and complex isophote shapes. Higher order (n > 4) harmonics now become meaningful and may correlate with structural properties, as boxyness/diskyness is known to do. This work also illustrates how the accurate construction, and subtraction, of a model from a galaxy image facilitates the identification and recovery of over-lapping sources such as globular clusters and the optical counterparts of X-ray sources.« less

Energetics and crystal chemistry of Ruddlesden-Popper type structures in high T(sub c) ceramic superconductors

NASA Technical Reports Server (NTRS)

Dwivedi, Anurag; Cormack, A. N.

1990-01-01

The formation of Ruddlesden-Popper type layers (alternating slabs of rocksalt and perovskite structures) is seen in these oxides which is similar in many respects to what is seen in the system Sr-Ti-O. However, it was observed that there are some significant differences, for example the rocksalt and perovskite blocks in new superconducting compounds are not necessarily electrically, unlike in Sr-Ti-O systems. This will certainly render an additional coulombic bonding energy between two different types of blocks and may well lead to significant differences in their structural chemistry. In the higher order members of the various homologous series, additional Cu-O planes are inserted in the perovskite blocks. In order for the unit cell to electrically neutral the net positive charge on rocksalt block (which remains constant throughout the homologous series) should be balanced by an equal negative charge on perovskite block. It, thus becomes necessary to create oxygen vacancies in the basic perovskite structure, when width of the perovskite slab changes on addition of extra Cu-O planes. Results of atomistic simulations suggest that these missing oxygen ions allow the Cu-O planes to buckle in these compounds. This is also supported by the absence of buckling in the first member of Bi-containing compounds in which there are no missing oxygen ions and the Sr-Ti-O series of compounds. Additional results are presented on the phase stability of polytypoid structures in these crystal chemically complex systems. The studies will focus on the determination of the location of Cu(3+) in the structures of higher order members of the La-Cu-O system and whether Cu(3+) ions or oxygen vacancies are energetically more favorable charge compensating mechanism.

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 4: Maintenance document (version 1.1)

NASA Technical Reports Server (NTRS)

Baruah, P. K.; Bussoletti, J. E.; Chiang, D. T.; Massena, W. A.; Nelson, F. D.; Furdon, D. J.; Tsurusaki, K.

1981-01-01

The Maintenance Document is a guide to the PAN AIR software system, a system which computes the subsonic or supersonic linear potential flow about a body of nearly arbitrary shape, using a higher order panel method. The document describes the over-all system and each program module of the system. Sufficient detail is given for program maintenance, updating and modification. It is assumed that the reader is familiar with programming and CDC (Control Data Corporation) computer systems. The PAN AIR system was written in FORTRAN 4 language except for a few COMPASS language subroutines which exist in the PAN AIR library. Structured programming techniques were used to provide code documentation and maintainability. The operating systems accommodated are NOS 1.2, NOS/BE and SCOPE 2.1.3 on the CDC 6600, 7600 and Cyber 175 computing systems. The system is comprised of a data management system, a program library, an execution control module and nine separate FORTRAN technical modules. Each module calculates part of the posed PAN AIR problem. The data base manager is used to communicate between modules and within modules. The technical modules must be run in a prescribed fashion for each PAN AIR problem. In order to ease the problem of supplying the many JCL cards required to execute the modules, a separate module called MEC (Module Execution Control) was created to automatically supply most of the JCL cards. In addition to the MEC generated JCL, there is an additional set of user supplied JCL cards to initiate the JCL sequence stored on the system.

The influence of microtopography on soil nutrients in created mitigation wetlands

USGS Publications Warehouse

Moser, K.F.; Ahn, C.; Noe, G.B.

2009-01-01

This study explores the relationship between microtopography and soil nutrients (and trace elements), comparing results for created and reference wetlands in Virginia, and examining the effects of disking during wetland creation. Replicate multiscale tangentially conjoined circular transects were used to quantify microtopography both in terms of elevation and by two microtopographic indices. Corresponding soil samples were analyzed for moisture content, total C and N, KCl-extractable NH4-N and NO3-N, and Mehlich-3 extractable P, Ca, Mg, K, Al, Fe, and Mn. Means and variances of soil nutrient/element concentrations were compared between created and natural wetlands and between disked and nondisked created wetlands. Natural sites had higher and more variable soil moisture, higher extractable P and Fe, lower Mn than created wetlands, and comparatively high variability in nutrient concentrations. Disked sites had higher soil moisture, NH4-N, Fe, and Mn than did nondisked sites. Consistently low variances (Levene test for inequality) suggested that nondisked sites had minimal nutrient heterogeneity. Across sites, low P availability was inferred by the molar ratio (Mehlich-3 [P/(Al + Fe)] < 0.06); strong intercorrelations among total C, total N, and extractable Fe, Al, and P suggested that humic-metal-P complexes may be important for P retention and availability. Correlations between nutrient/element concentrations and microtopographic indices suggested increased Mn and decreased K and Al availability with increased surface roughness. Disking appears to enhance water and nutrient retention, as well as nutrient heterogeneity otherwise absent from created wetlands, thus potentially promoting ecosystem development. ?? 2008 Society for Ecological Restoration International.

Bridging the Gap between Academic Research and Regional Development in the Basque Country

ERIC Educational Resources Information Center

Karlsen, James; Larrea, Miren; Wilson, James R.; Aranguren, Mari Jose

2012-01-01

The discussion in this article focuses on how the gap between academic knowledge and regional development can be bridged, creating conditions for change processes between researchers and regional agents. Institutional entrepreneurs can create regional development organisations and research organisations, but in order to fulfil regional needs it is…

The Role of Capital in Improving Productivity and Creating Jobs.

ERIC Educational Resources Information Center

Carnoy, Martin

Causes of the significant decrease in productivity growth and dramatic increase in unemployment in the United States since the mid-1960's are examined in order to test the underlying assumption of current economic policies that increasing capital savings and investments will create fuller and more productive employment. Data on trends in…

Turning a dream into reality: the evolution of a seamless electronic health record.

PubMed

Dalander, G; Willner, S; Brasch, S

1997-10-01

Growing competition in the healthcare industry has created a strong-demand for improvement in all areas. Learn how integrated delivery systems have been created and effectively utilized in order to change how the business side of healthcare is conducted and how provider organizations measure and achieve success.

77 FR 37261 - Continuation of the National Emergency With Respect to the Risk of Nuclear Proliferation Created...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... National Emergency With Respect to the Risk of Nuclear Proliferation Created by the Accumulation of Weapons... Extracted from Nuclear Weapons, dated February 18, 1993, and related contracts and agreements (collectively... derived from nuclear weapons to low enriched uranium for peaceful commercial purposes. The order invoked...

76 FR 79656 - E & B Giftware LLC, Provisional Acceptance of a Settlement Agreement and Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... product hazard, or created an unreasonable risk of serious injury or death, EB failed to immediately... product hazard or create an unreasonable risk of serious injury or death. Furthermore, it denies that it.... Understandings, agreements, representations, or interpretations apart from those contained in the Agreement and...

Two Development Theories: Ibn-I-Khaldoun and Wallerstein

ERIC Educational Resources Information Center

Atousa, Amirabedini

2013-01-01

Purpose: Each day, many different people in different societies are striving within their daily work to advance society. Every society needs to create ideas for further development and in order to become recognised as developed. The purpose of this paper is to show how different cultures at different times created similar ideas and theories to…

Professional Learning Communities: Creating a Foundation for Collaboration Skills in Pre-Service Teachers

ERIC Educational Resources Information Center

Hoaglund, Amy E.; Birkenfeld, Karen; Box, Jean Ann

2014-01-01

According to Richard DuFour (2004), "To create a professional learning community, focus on learning rather than teaching, work collaboratively and hold yourself accountable for results." Professional learning communities provide the structure that must exist within a school in order to become effective. However, to truly prepare…

Making It Work: Creating a Student-Friendly Repository of Instructional Videos

ERIC Educational Resources Information Center

Keba, Michelle; Segno, Jamie; Schofield, Michael

2015-01-01

This case study investigates how a team of librarians at Nova Southeastern University (NSU) worked together to assess and optimize their library's current instructional videos in order to create a mobile-first video hosting platform, known as LibraryLearn. Instructional library videos serve as invaluable resources for students who are not present…

Using Evidence to Create Next Generation High Schools

ERIC Educational Resources Information Center

Office of Planning, Evaluation and Policy Development, US Department of Education, 2016

2016-01-01

Next Generation High Schools are schools that redesign the high school experience to make it more engaging and worthwhile for high school students. In order to create such Next Generation High Schools, schools, districts, and States should utilize evidence-based strategies to transform high schools in ways that engage students and help prepare…

43 CFR 3485.2 - Royalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (d) If a Federal coal lease that provides for a cents-per-ton Federal royalty is developed by in situ..., Royalties and Records § 3485.2 Royalties. (a) Provisions for the payment of advance royalty in lieu of..., except those created in order to finance a mine, shall not be created by a Federal lease transfer or...

43 CFR 3485.2 - Royalties.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (d) If a Federal coal lease that provides for a cents-per-ton Federal royalty is developed by in situ..., Royalties and Records § 3485.2 Royalties. (a) Provisions for the payment of advance royalty in lieu of..., except those created in order to finance a mine, shall not be created by a Federal lease transfer or...

Measuring and Communicating the Value Created by an Organization

ERIC Educational Resources Information Center

Sherman, W. Richard

2010-01-01

This paper offers a different perspective in measuring the value created by an organization. It does so in the context of an undergraduate course in managerial accounting. In order to break down the functional silo approach to problem solving that has become the model of traditional business education, applications of shadow accounting, the…

Brady's Geothermal Field - Metadata for InSAR Holdings

DOE Data Explorer

Ali, Tabrez

2016-07-29

List of synthetic aperture radar (SAR) images acquired by TerraSAR-X and TanDEM-X satellite missions and archived at UNAVCO's WINSAR facility. See file "Bradys TSX Holdings.csv" for individual links. NOTE: The user must create an account in order to access the data (See "Instructions for Creating an Account" below).

Creating, generating and comparing random network models with NetworkRandomizer.

PubMed

Tosadori, Gabriele; Bestvina, Ivan; Spoto, Fausto; Laudanna, Carlo; Scardoni, Giovanni

2016-01-01

Biological networks are becoming a fundamental tool for the investigation of high-throughput data in several fields of biology and biotechnology. With the increasing amount of information, network-based models are gaining more and more interest and new techniques are required in order to mine the information and to validate the results. To fill the validation gap we present an app, for the Cytoscape platform, which aims at creating randomised networks and randomising existing, real networks. Since there is a lack of tools that allow performing such operations, our app aims at enabling researchers to exploit different, well known random network models that could be used as a benchmark for validating real, biological datasets. We also propose a novel methodology for creating random weighted networks, i.e. the multiplication algorithm, starting from real, quantitative data. Finally, the app provides a statistical tool that compares real versus randomly computed attributes, in order to validate the numerical findings. In summary, our app aims at creating a standardised methodology for the validation of the results in the context of the Cytoscape platform.

The Acquisition of Neg-V and V-Neg Order in Embedded Clauses in Swedish: A Microparametric Approach

ERIC Educational Resources Information Center

Waldmann, Christian

2014-01-01

This article examines the acquisition of embedded verb placement in Swedish children, focusing on Neg-V and V-Neg order. It is proposed that a principle of economy of movement creates an overuse of V-Neg order in embedded clauses and that the low frequency of the target-consistent Neg-V order in child-directed speech obstructs children from…

Bond-orientational analysis of hard-disk and hard-sphere structures.

PubMed

Senthil Kumar, V; Kumaran, V

2006-05-28

We report the bond-orientational analysis results for the thermodynamic, random, and homogeneously sheared inelastic structures of hard-disks and hard-spheres. The thermodynamic structures show a sharp rise in the order across the freezing transition. The random structures show the absence of crystallization. The homogeneously sheared structures get ordered at a packing fraction higher than the thermodynamic freezing packing fraction, due to the suppression of crystal nucleation. On shear ordering, strings of close-packed hard-disks in two dimensions and close-packed layers of hard-spheres in three dimensions, oriented along the velocity direction, slide past each other. Such a flow creates a considerable amount of fourfold order in two dimensions and body-centered-tetragonal (bct) structure in three dimensions. These transitions are the flow analogs of the martensitic transformations occurring in metals due to the stresses induced by a rapid quench. In hard-disk structures, using the bond-orientational analysis we show the presence of fourfold order. In sheared inelastic hard-sphere structures, even though the global bond-orientational analysis shows that the system is highly ordered, a third-order rotational invariant analysis shows that only about 40% of the spheres have face-centered-cubic (fcc) order, even in the dense and near-elastic limits, clearly indicating the coexistence of multiple crystalline orders. When layers of close-packed spheres slide past each other, in addition to the bct structure, the hexagonal-close-packed (hcp) structure is formed due to the random stacking faults. Using the Honeycutt-Andersen pair analysis and an analysis based on the 14-faceted polyhedra having six quadrilateral and eight hexagonal faces, we show the presence of bct and hcp signatures in shear ordered inelastic hard-spheres. Thus, our analysis shows that the dense sheared inelastic hard-spheres have a mixture of fcc, bct, and hcp structures.

Web server for priority ordered multimedia services

NASA Astrophysics Data System (ADS)

Celenk, Mehmet; Godavari, Rakesh K.; Vetnes, Vermund

2001-10-01

In this work, our aim is to provide finer priority levels in the design of a general-purpose Web multimedia server with provisions of the CM services. The type of services provided include reading/writing a web page, downloading/uploading an audio/video stream, navigating the Web through browsing, and interactive video teleconferencing. The selected priority encoding levels for such operations follow the order of admin read/write, hot page CM and Web multicasting, CM read, Web read, CM write and Web write. Hot pages are the most requested CM streams (e.g., the newest movies, video clips, and HDTV channels) and Web pages (e.g., portal pages of the commercial Internet search engines). Maintaining a list of these hot Web pages and CM streams in a content addressable buffer enables a server to multicast hot streams with lower latency and higher system throughput. Cold Web pages and CM streams are treated as regular Web and CM requests. Interactive CM operations such as pause (P), resume (R), fast-forward (FF), and rewind (RW) have to be executed without allocation of extra resources. The proposed multimedia server model is a part of the distributed network with load balancing schedulers. The SM is connected to an integrated disk scheduler (IDS), which supervises an allocated disk manager. The IDS follows the same priority handling as the SM, and implements a SCAN disk-scheduling method for an improved disk access and a higher throughput. Different disks are used for the Web and CM services in order to meet the QoS requirements of CM services. The IDS ouput is forwarded to an Integrated Transmission Scheduler (ITS). The ITS creates a priority ordered buffering of the retrieved Web pages and CM data streams that are fed into an auto regressive moving average (ARMA) based traffic shaping circuitry before being transmitted through the network.

Culture Shock and Higher Education Performance: Implications for Teaching

ERIC Educational Resources Information Center

Kelly, Philip; Moogan, Yvonne

2012-01-01

The globalisation of higher education brings together learners and teachers from differing systems, creating a heterogeneous and diverse environment. Yet many higher education institutions typically rely on foreign students themselves to adapt to their new higher education environments. An investigation was undertaken as to whether traditional…

Jet Inlet Efficiency

DTIC Science & Technology

2013-08-08

Lay down plastic sheeting that is double the size of the mold covered in fabric in order to fully envelope the mold. o Line half of the sheet (in...the mold and connect to clay tape to create an air tight sealed bag with a hose leading to the outside pump. o Once the seal is created, turn on the...connected pump to remove all air from the bag that has been created.  Ensure that as air is removed, the bag fits the form of the desired mold as

Creating a VAPEPS database: A VAPEPS tutorial

NASA Technical Reports Server (NTRS)

Graves, George

1989-01-01

A procedural method is outlined for creating a Vibroacoustic Payload Environment Prediction System (VAPEPS) Database. The method of presentation employs flowcharts of sequential VAPEPS Commands used to create a VAPEPS Database. The commands are accompanied by explanatory text to the right of the command in order to minimize the need for repetitive reference to the VAPEPS user's manual. The method is demonstrated by examples of varying complexity. It is assumed that the reader has acquired a basic knowledge of the VAPEPS software program.

Controlling nested wrinkle morphology through the boundary effect on narrow-band thin films

NASA Astrophysics Data System (ADS)

Xu, Hanyang; Shi, Tielin; Liao, Guanglan; Xia, Qi

2017-07-01

We describe the formation of nested wrinkles created by the thermal mismatch between a narrow-band thin film and a compliant substrate. When a film is described as "narrow-band", it literally means that the film band width is much shorter than its length; more precisely, it means that the width is comparable with the wavelength of the wrinkles. A silicon mask was used during film sputtering to create narrow-band films on poly (dimethylsiloxane) substrate, thus creating regular boundaries to steer local stresses and control wrinkle morphology. Disordered nano-scale wrinkles were found nested within highly ordered micro-scale sinusoidal wrinkles. The formation of nested wrinkles was explained through the amplitude and wavelength saturation of nano-scale wrinkles. The disordered morphology of nano-scale wrinkles and the highly ordered morphology of micro-scale wrinkles were explained by using the boundary effect.

Investigating Student Perceptions of the Chemistry Laboratory and Their Approaches to Learning in the Laboratory

NASA Astrophysics Data System (ADS)

Berger, Spencer Granett

This dissertation explores student perceptions of the instructional chemistry laboratory and the approaches students take when learning in the laboratory environment. To measure student perceptions of the chemistry laboratory, a survey instrument was developed. 413 students responded to the survey during the Fall 2011 semester. Students' perception of the usefulness of the laboratory in helping them learn chemistry in high school was related to several factors regarding their experiences in high school chemistry. Students' perception of the usefulness of the laboratory in helping them learn chemistry in college was also measured. Reasons students provided for the usefulness of the laboratory were categorized. To characterize approaches to learning in the laboratory, students were interviewed midway through semester (N=18). The interviews were used to create a framework describing learning approaches that students use in the laboratory environment. Students were categorized into three levels: students who view the laboratory as a requirement, students who believe that the laboratory augments their understanding, and students who view the laboratory as an important part of science. These categories describe the types of strategies students used when conducting experiments. To further explore the relationship between students' perception of the laboratory and their approaches to learning, two case studies are described. These case studies involve interviews in the beginning and end of the semester. In the interviews, students reflect on what they have learned in the laboratory and describe their perceptions of the laboratory environment. In order to encourage students to adopt higher-level approaches to learning in the laboratory, a metacognitive intervention was created. The intervention involved supplementary questions that students would answer while completing laboratory experiments. The questions were designed to encourage students to think critically about the laboratory procedures. In order to test the effects of the intervention, an experimental group (N=87) completed these supplementary questions during two laboratory experiments while a control group (N=84) performed the same experiments without these additional questions. The effects of the intervention on laboratory exam performance were measured. Students in the experimental group had a higher average on the laboratory exam than students in the control group.

Flexible, Photopatterned, Colloidal CdSe Semiconductor Nanocrystal Integrated Circuits

NASA Astrophysics Data System (ADS)

Stinner, F. Scott

As semiconductor manufacturing pushes towards smaller and faster transistors, a parallel goal exists to create transistors which are not nearly as small. These transistors are not intended to match the performance of traditional crystalline semiconductors; they are designed to be significantly lower in cost and manufactured using methods that can make them physically flexible for applications where form is more important than speed. One of the developing technologies for this application is semiconductor nanocrystals. We first explore methods to develop CdSe nanocrystal semiconducting "inks" into large-scale, high-speed integrated circuits. We demonstrate photopatterned transistors with mobilities of 10 cm2/Vs on Kapton substrates. We develop new methods for vertical interconnect access holes to demonstrate multi-device integrated circuits including inverting amplifiers with 7 kHz bandwidths, ring oscillators with <10 micros stage delays, and NAND and NOR logic gates. In order to produce higher performance and more consistent transistors, we develop a new hybrid procedure for processing the CdSe nanocrystals. This procedure produces transistors with repeatable performance exceeding 40 cm2/Vs when fabricated on silicon wafers and 16 cm 2/vs when fabricated as part of photopatterned integrated circuits on Kapton substrates. In order to demonstrate the full potential of these transistors, methods to create high-frequency oscillators were developed. These methods allow for transistors to operate at higher voltages as well as provide a means for wirebonding to the Kapton substrate, both of which are required for operating and probing high-frequency oscillators. Simulations of this system show the potential for operation at MHz frequencies. Demonstration of these transistors in this frequency range would open the door for development of CdSe integrated circuits for high-performance sensor, display, and audio applications. To develop further applications of electronics on flexible substrates, procedures are developed for the integration of polychromatic displays on polyethylene terephthalate (PET) substrates and a commercial near field communication (NFC) link. The device draws its power from the NFC transmitter common on smartphones and eliminates the need for a fixed battery. This allows for the mass deployment of flexible, interactive displays on product packaging.

Higher-order harmonics of general limited diffraction Bessel beams

NASA Astrophysics Data System (ADS)

Ding, De-Sheng; Huang, Jin-Huang

2016-12-01

In this paper, we extensively study the higher-order harmonic generation of the general limited diffraction m-th-order Bessel beam. The analysis is based on successive approximations of the Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation. Asymptotic expansions are presented for higher-order harmonic Bessel beams in near and far fields. The validity of asymptotic approximation is also analyzed. The higher-order harmonic of the Bessel beam with the lowest zero-order is taken as a special example. Project supported by the National Natural Science Foundation of China (Grant Nos. 11074038 and 11374051).

Digital Video Projects of, by, and for New Teachers: The Multiple Educational Functions of Creating Multimedia

ERIC Educational Resources Information Center

Halter, Christopher; Levin, James

2014-01-01

A three year study of digital video creation in higher education investigated the impact that creating short digital videos by university students in their final class of a teacher education program had on those students. Each student created a short video reflecting on the process of how he/she became a teacher. An analysis of the videos…

Influence of the flap on outcomes in corneal refractive surgery with femtosecond laser: SMILE vs. FLEx.

PubMed

Alió, J L; El Bahrawy, M; Angelov, A; Ortiz, D; Yébana, P

2017-05-01

To investigate the influence of creating a flap on the postoperative optical quality of the cornea in terms of predicted corneal curvature and Seidel aberrations after 2 modalities of femtosecond assisted corneal lenticule extraction laser for the correction of myopia and myopic astigmatism: The flapless procedure small incision lenticular extraction (SMILE) and the flap-based femtosecond lenticular extraction (FLEx). The study is a prospective consecutive non-randomised comparative interventional case series including 64 eyes with myopic or myopic astigmatism refractive errors. Patients were divided into 2 groups matched for age, sex and myopia. One group underwent SMILE treatment and the other underwent FLEx treatment. Seidel aberrations root-mean-square values were obtained with a 10mm aperture using the ATLAS 9000 topographer before surgery and 3 months after surgery. The relationship between the post-surgical corneal radius and the predicted sculpted radius were analysed in each group. The mean percentage change in the curvature radius was -2.03% in the FLEx group and -1.77% in the SMILE group (P=.655). The higher correlation for the SMILE group demonstrates a better predictability after the surgery. As regards corneal aberrations, the FLEx treatment showed a greater increase of higher order aberrations than SMILE treatment (P=.04). The mean refractive change in corneal curvature, which is indirectly related to the biomechanical response of the corneal surface after the lenticule cut and extraction, was similar after both treatments. However, the flap based FLEx procedure showed a greater degradation of the corneal optical quality in terms of induction of higher order aberrations. Copyright © 2016 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

A Low Cost Inflatable CubeSat Drag Brake Utilizing Sublimation

NASA Astrophysics Data System (ADS)

Horn, Adam Charles

The United Nations Inter-Agency Debris Coordination Committee has adopted a 25-year post-mission lifetime requirement for any satellite orbiting below 2000 km in order to mitigate the growing orbital debris threat. Low-cost CubeSats have become important satellite platforms with startling capabilities, but this guideline restricts them to altitudes below 600 km because they remain in orbit too long. In order to enable CubeSat deployments at higher release altitudes, a low-cost, ultra-reliable deorbit device is needed. This thesis reports on efforts to develop a deployable and passively inflatable drag brake that can deorbit from higher orbital altitudes, thereby complying with the 25-year orbital lifetime guideline. On the basis of concepts first implemented during the NASA Echo Satellite Project, this study investigated the design of an inflatable CubeSat drag device that utilizes sublimating benzoic acid powder as the inflation propellant. Testing has focused on demonstrating the functionality of charging a Mylar drag brake bladder with appropriate quantities of benzoic acid powder, and the exposure to a controlled-temperature vacuum chamber causing the bladder to inflate. Although results show a measureable increase in internal pressure when introduced to anticipated orbital temperatures, a significant air-derived expansion prior to sublimation was encountered due to the undetectable volume of ambient residual air in the fabricated membrane bladders. These tests have demonstrated the feasibility of this approach, thereby demonstrating that this concept can create a potentially smaller and less expensive drag device, eliminating inflation gas tanks and valves. In that way, this system can provide a low-cost, miniaturized system that reduces a CubeSat's orbital lifetime to less than 25 years, when placed at higher orbital altitude.

Delay differential analysis of time series.

PubMed

Lainscsek, Claudia; Sejnowski, Terrence J

2015-03-01

Nonlinear dynamical system analysis based on embedding theory has been used for modeling and prediction, but it also has applications to signal detection and classification of time series. An embedding creates a multidimensional geometrical object from a single time series. Traditionally either delay or derivative embeddings have been used. The delay embedding is composed of delayed versions of the signal, and the derivative embedding is composed of successive derivatives of the signal. The delay embedding has been extended to nonuniform embeddings to take multiple timescales into account. Both embeddings provide information on the underlying dynamical system without having direct access to all the system variables. Delay differential analysis is based on functional embeddings, a combination of the derivative embedding with nonuniform delay embeddings. Small delay differential equation (DDE) models that best represent relevant dynamic features of time series data are selected from a pool of candidate models for detection or classification. We show that the properties of DDEs support spectral analysis in the time domain where nonlinear correlation functions are used to detect frequencies, frequency and phase couplings, and bispectra. These can be efficiently computed with short time windows and are robust to noise. For frequency analysis, this framework is a multivariate extension of discrete Fourier transform (DFT), and for higher-order spectra, it is a linear and multivariate alternative to multidimensional fast Fourier transform of multidimensional correlations. This method can be applied to short or sparse time series and can be extended to cross-trial and cross-channel spectra if multiple short data segments of the same experiment are available. Together, this time-domain toolbox provides higher temporal resolution, increased frequency and phase coupling information, and it allows an easy and straightforward implementation of higher-order spectra across time compared with frequency-based methods such as the DFT and cross-spectral analysis.

Brain MR imaging at ultra-low radiofrequency power.

PubMed

Sarkar, Subhendra N; Alsop, David C; Madhuranthakam, Ananth J; Busse, Reed F; Robson, Philip M; Rofsky, Neil M; Hackney, David B

2011-05-01

To explore the lower limits for radiofrequency (RF) power-induced specific absorption rate (SAR) achievable at 1.5 T for brain magnetic resonance (MR) imaging without loss of tissue signal or contrast present in high-SAR clinical imaging in order to create a potentially viable MR method at ultra-low RF power to image tissues containing implanted devices. An institutional review board-approved HIPAA-compliant prospective MR study design was used, with written informed consent from all subjects prior to MR sessions. Seven healthy subjects were imaged prospectively at 1.5 T with ultra-low-SAR optimized three-dimensional (3D) fast spin-echo (FSE) and fluid-attenuated inversion-recovery (FLAIR) T2-weighted sequences and an ultra-low-SAR 3D spoiled gradient-recalled acquisition in the steady state T1-weighted sequence. Corresponding high-SAR two-dimensional (2D) clinical sequences were also performed. In addition to qualitative comparisons, absolute signal-to-noise ratios (SNRs) and contrast-to-noise ratios (CNRs) for multicoil, parallel imaging acquisitions were generated by using a Monte Carlo method for quantitative comparison between ultra-low-SAR and high-SAR results. There were minor to moderate differences in the absolute tissue SNR and CNR values and in qualitative appearance of brain images obtained by using ultra-low-SAR and high-SAR techniques. High-SAR 2D T2-weighted imaging produced slightly higher SNR, while ultra-low-SAR 3D technique not only produced higher SNR for T1-weighted and FLAIR images but also higher CNRs for all three sequences for most of the brain tissues. The 3D techniques adopted here led to a decrease in the absorbed RF power by two orders of magnitude at 1.5 T, and still the image quality was preserved within clinically acceptable imaging times. RSNA, 2011

40 CFR 80.140 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... post-refinery component in order to create detergent-additized gasoline or detergent-additized post..., a truck or individual storage tank) at which detergent is blended with gasoline or post-refinery... post-refinery component blended with gasoline, in order to control deposit formation. Carrier oil means...

The Ethics of Setting Course Expectations to Manipulate Student Evaluations of Teaching Effectiveness in Higher Education: An Examination of the Ethical Dilemmas Created by the Use of SETEs and a Proposal for Further Study and Analysis

ERIC Educational Resources Information Center

Neal, Catherine S.; Elliott, Teressa

2009-01-01

Because student evaluations of teaching effectiveness (SETEs) are an important and widely used tool used in the evaluation and reward systems for faculty members in higher education, a discussion and analysis of the ethical problems that may arise as a result of the conflict created by expectations of performance is provided. This discussion…

Does the Wage Gap between Private and Public Sectors Encourage Political Corruption?

PubMed Central

Podobnik, Boris; Vukovic, Vuk; Stanley, H. Eugene

2015-01-01

We present a dynamic network model of corrupt and noncorrupt employees representing two states in the public and private sector. Corrupt employees are more connected to one another and are less willing to change their attitudes regarding corruption than noncorrupt employees. This behavior enables them to prevail and become the majority in the workforce through a first-order phase transition even though they initially represented a minority. In the model, democracy—understood as the principle of majority rule—does not create corruption, but it serves as a mechanism that preserves corruption in the long run. The motivation for our network model is a paradox that exists on the labor market. Although economic theory indicates that higher risk investments should lead to larger rewards, in many developed and developing countries workers in lower-risk public sector jobs are paid more than workers in higher-risk private sector jobs. To determine the long-run sustainability of this economic paradox, we study data from 28 EU countries and find that the public sector wage premium increases with the level of corruption. PMID:26495847

Deposition of thermal and hot-wire chemical vapor deposition copper thin films on patterned substrates.

PubMed

Papadimitropoulos, G; Davazoglou, D

2011-09-01

In this work we study the hot-wire chemical vapor deposition (HWCVD) of copper films on blanket and patterned substrates at high filament temperatures. A vertical chemical vapor deposition reactor was used in which the chemical reactions were assisted by a tungsten filament heated at 650 degrees C. Hexafluoroacetylacetonate Cu(I) trimethylvinylsilane (CupraSelect) vapors were used, directly injected into the reactor with the aid of a liquid injection system using N2 as carrier gas. Copper thin films grown also by thermal and hot-wire CVD. The substrates used were oxidized silicon wafers on which trenches with dimensions of the order of 500 nm were formed and subsequently covered with LPCVD W. HWCVD copper thin films grown at filament temperature of 650 degrees C showed higher growth rates compared to the thermally ones. They also exhibited higher resistivities than thermal and HWCVD films grown at lower filament temperatures. Thermally grown Cu films have very uniform deposition leading to full coverage of the patterned substrates while the HWCVD films exhibited a tendency to vertical growth, thereby creating gaps and incomplete step coverage.

Does the Wage Gap between Private and Public Sectors Encourage Political Corruption?

PubMed

Podobnik, Boris; Vukovic, Vuk; Stanley, H Eugene

2015-01-01

We present a dynamic network model of corrupt and noncorrupt employees representing two states in the public and private sector. Corrupt employees are more connected to one another and are less willing to change their attitudes regarding corruption than noncorrupt employees. This behavior enables them to prevail and become the majority in the workforce through a first-order phase transition even though they initially represented a minority. In the model, democracy-understood as the principle of majority rule-does not create corruption, but it serves as a mechanism that preserves corruption in the long run. The motivation for our network model is a paradox that exists on the labor market. Although economic theory indicates that higher risk investments should lead to larger rewards, in many developed and developing countries workers in lower-risk public sector jobs are paid more than workers in higher-risk private sector jobs. To determine the long-run sustainability of this economic paradox, we study data from 28 EU countries and find that the public sector wage premium increases with the level of corruption.

A flight expert system (FLES) for on-board fault monitoring and diagnosis

NASA Technical Reports Server (NTRS)

Ali, Moonis; Scharnhorst, D. A.; Ai, C. S.; Feber, H. J.

1987-01-01

The increasing complexity of modern aircraft creates a need for a larger number of caution and warning devices. But more alerts require more memorization and higher workloads for the pilot and tend to induce a higher probability of errors. Therefore, an architecture for a flight expert system (FLES) is developed to assist pilots in monitoring, diagnosing and recovering from in-flight faults. A prototype of FLES has been implemented. A sensor simulation model was developed and employed to provide FLES with airplane status information during the diagnostic process. The simulator is based on the Lockheed Advanced Concept System (ACS), a future generation airplane, and on the Boeing 737. A distinction between two types of faults, maladjustments and malfunctions, has led to two approaches to fault diagnosis. These approaches are evident in two FLES subsystems: the flight phase monitor and the sensor interrupt handler. The specific problem addressed in these subsystems has been that of integrating information received from multiple sensors with domain knowledge in order to access abnormal situations during airplane flight. Malfunctions and maladjustments are handled separately, diagnosed using domain knowledge.

Let's Create a Comic Strip.

ERIC Educational Resources Information Center

Wright, Gary; Sherman, Ross

1999-01-01

Considers how teachers can help students become literate, critical, creative thinkers by aligning curricula, teaching strategies, and instructional resources. Promotes literacy, higher-level thinking, and writing skills through the interdisciplinary approach of combining language and art. Suggests that creating a comic strip stimulates and…

Assessing School Work Culture: A Higher-Order Analysis and Strategy.

ERIC Educational Resources Information Center

Johnson, William L.; Johnson, Annabel M.; Zimmerman, Kurt J.

This paper reviews a work culture productivity model and reports the development of a work culture instrument based on the culture productivity model. Higher order principal components analysis was used to assess work culture, and a third-order factor analysis shows how the first-order factors group into higher-order factors. The school work…

Fiscal Stress: Worldwide Trends in Higher Education Finance

ERIC Educational Resources Information Center

Vossensteyn, Hans

2004-01-01

While higher education is generally a high priority in boosting economic development, public budgets to sustain expansion of higher education systems remain limited around the globe. This fiscal stress creates an impetus for governments to develop various strategies to meet the growing demand--from both students and society--for higher education…

Degrees of Integrity: The Threat of Corruption in Higher Education

ERIC Educational Resources Information Center

Chapman, David W.; Lindner, Samira

2016-01-01

Corruption in higher education is the focus of growing international concern among governments, educators, students, and other stakeholders. Those working in higher education institutions now face a unique convergence of pressures that is creating a heightened threat to the integrity of the higher education enterprise worldwide. This paper draws…

Reconfiguring the Higher Education Value Chain

ERIC Educational Resources Information Center

Pathak, Virendra; Pathak, Kavita

2010-01-01

Forces of demand and supply are changing the dynamics of the higher education market. Transformation of institutions of higher learning into competitive enterprise is underway. Higher education institutions are seemingly under intense pressure to create value and focus their efforts and scarce funds on activities that drive up value for their…

Exploring item and higher order factor structure with the Schmid-Leiman solution: syntax codes for SPSS and SAS.

PubMed

Wolff, Hans-Georg; Preising, Katja

2005-02-01

To ease the interpretation of higher order factor analysis, the direct relationships between variables and higher order factors may be calculated by the Schmid-Leiman solution (SLS; Schmid & Leiman, 1957). This simple transformation of higher order factor analysis orthogonalizes first-order and higher order factors and thereby allows the interpretation of the relative impact of factor levels on variables. The Schmid-Leiman solution may also be used to facilitate theorizing and scale development. The rationale for the procedure is presented, supplemented by syntax codes for SPSS and SAS, since the transformation is not part of most statistical programs. Syntax codes may also be downloaded from www.psychonomic.org/archive/.

Ecosystem development after mangrove wetland creation: plant-soil change across a 20-year chronosequence

USGS Publications Warehouse

Osland, Michael J.; Spivak, Amanda C.; Nestlerode, Janet A.; Lessmann, Jeannine M.; Almario, Alejandro E.; Heitmuller, Paul T.; Russell, Marc J.; Krauss, Ken W.; Alvarez, Federico; Dantin, Darrin D.; Harvey, James E.; From, Andrew S.; Cormier, Nicole; Stagg, Camille L.

2012-01-01

Mangrove wetland restoration and creation efforts are increasingly proposed as mechanisms to compensate for mangrove wetland losses. However, ecosystem development and functional equivalence in restored and created mangrove wetlands are poorly understood. We compared a 20-year chronosequence of created tidal wetland sites in Tampa Bay, Florida (USA) to natural reference mangrove wetlands. Across the chronosequence, our sites represent the succession from salt marsh to mangrove forest communities. Our results identify important soil and plant structural differences between the created and natural reference wetland sites; however, they also depict a positive developmental trajectory for the created wetland sites that reflects tightly coupled plant-soil development. Because upland soils and/or dredge spoils were used to create the new mangrove habitats, the soils at younger created sites and at lower depths (10-30 cm) had higher bulk densities, higher sand content, lower soil organic matter (SOM), lower total carbon (TC), and lower total nitrogen (TN) than did natural reference wetland soils. However, in the upper soil layer (0-10 cm), SOM, TC, and TN increased with created wetland site age simultaneously with mangrove forest growth. The rate of created wetland soil C accumulation was comparable to literature values for natural mangrove wetlands. Notably, the time to equivalence for the upper soil layer of created mangrove wetlands appears to be faster than for many other wetland ecosystem types. Collectively, our findings characterize the rate and trajectory of above- and below-ground changes associated with ecosystem development in created mangrove wetlands; this is valuable information for environmental managers planning to sustain existing mangrove wetlands or mitigate for mangrove wetland losses.

78 FR 3480 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... its order flow on Nasdaq, and create both real-time and historical reports of such order flow. Members... OUCH ports on the Nasdaq system in real-time, analyze the latency of messages sent to the Nasdaq system... provides a subscribing member firm with real-time order latency and analytical tools to measure the...

Effects of the Higher Order Thinking Skills Program on At-Risk Young Adolescents' Self-Concept, Reading Achievement, and Thinking Skills.

ERIC Educational Resources Information Center

Eisenman, Gordon; Payne, Beverly D.

1997-01-01

Contrasted effects of Higher Order Thinking Skills (HOTS) program to those of Chapter 1 programs on fourth and fifth graders' reading achievement, self-concept, and higher-order thinking skills. Found that HOTS is more effective in raising self-concept and some higher-order thinking skills in fifth grade and after two years of treatment, with…

Training Maneuver Evaluation for Reduced Order Modeling of Stability & Control Properties Using Computational Fluid Dynamics

DTIC Science & Technology

2013-03-01

reduced order model is created. Finally, previous research in this area of study will be examined, and its application to this research will be...TRAINING MANEUVER EVALUATION FOR REDUCED ORDER MODELING OF STABILITY & CONTROL PROPERTIES USING COMPUTATIONAL FLUID DYNAMICS THESIS Craig Curtis...Government and is not subject to copyright protection in the United States. AFIT-ENY-13-M-28 TRAINING MANEUVER EVALUATION FOR REDUCED ORDER MODELING OF

From Shock to Action: Pathway to Success

ERIC Educational Resources Information Center

Stone, Michael R.

2012-01-01

Career and technical education (CTE) is forced to be reactive. A good example is the fact that CTE cannot prepare students for jobs that do not exist. Outside forces create the demand for occupations and workers: CTE has to react to the demand. CTE must also respond and react to changes created by legislative mandates and administrative order. Due…

An Intelligent Crawler for a Virtual World

ERIC Educational Resources Information Center

Eno, Joshua

2010-01-01

Virtual worlds, which allow users to create and interact with content in a 3D, multi-user environment, growing and becoming more integrated with the traditional flat web. However, little is empirically known about the content users create in virtual world and how it can be indexed and searched effectively. In order to gain a better understanding…

Creating a Positive School Climate at the Junior High Level.

ERIC Educational Resources Information Center

Licata, Vincent F.

One of the seven correlates of an effective school, as identified by the Effective Schools Research, is a positive school climate: a positive attitude on the part of the entire staff and student body exhibited through overt behavior that creates a warm, orderly learning environment. Development of such an environment depends upon: (1) strong…

Data Visualization: An Exploratory Study into the Software Tools Used by Businesses

ERIC Educational Resources Information Center

Diamond, Michael; Mattia, Angela

2017-01-01

Data visualization is a key component to business and data analytics, allowing analysts in businesses to create tools such as dashboards for business executives. Various software packages allow businesses to create these tools in order to manipulate data for making informed business decisions. The focus is to examine what skills employers are…

Towards Contextual Experimentation: Creating a Faculty Learning Community to Cultivate Writing-to-Learn Practices

ERIC Educational Resources Information Center

Chang, Mary K.; Rao, Kavita; Stewart, Maria L.; Farley, Cynthia A.; Li, Katherine

2016-01-01

In order to explore ways to integrate new pedagogical practices, five faculty members created an informal faculty learning community focused on writing-to-learn practices, an inquiry and process-based writing pedagogy. The faculty members learned the writing-to-learn practices together, periodically met to discuss how they implemented the…

Business as Usual? It's Just Not an Option

ERIC Educational Resources Information Center

Blewitt, John

2010-01-01

There is no doubt that in order to address the serious challenges arising from anthropogenic--or human-produced--climate change, Britain, along with the rest of the world, needs to adopt policies and develop skills that will create a low-carbon economy with a highly effective use of renewable and natural resources. People need to create the…

The Effect of Positive Mindset Trigger Words on the Performance Expression of Non-Expert Adult Singers

ERIC Educational Resources Information Center

Broomhead, Paul

2010-01-01

Most musicians strive to create performances that are both technically correct and musically expressive. They make specific changes to their performance to bring out the music's expressive potential. Researchers have attempted to identify these particular changes in order to better understand how expressive performances are created. This is an…

Introducing Inmates to Extension through Financial Education and Experiential Learning Tools

ERIC Educational Resources Information Center

Richel, Karen

2013-01-01

Research shows that in order to reduce recidivism rates in prisons, financial education and other life skills should be a mandatory topic in our prison systems. By creating a learning environment conducive to the specialized needs of this audience, an inmate's ability to set goals, recognize wants and needs, maintain bank accounts, create a…

Brady Geothermal Field InSAR Raw Data

DOE Data Explorer

Ali, Tabrez

2015-03-31

List of TerraSAR-X/TanDEM-X images acquired between 2015-01-01 and 2015-03-31, and archived at https://winsar.unavco.org. See file "BHS InSAR Data with URLs.csv" for individual links. NOTE: The user must create an account in order to access the data (See "Instructions for Creating an Account" below).

Data Visualization: An Exploratory Study into the Software Tools Used by Businesses

ERIC Educational Resources Information Center

Diamond, Michael; Mattia, Angela

2015-01-01

Data visualization is a key component to business and data analytics, allowing analysts in businesses to create tools such as dashboards for business executives. Various software packages allow businesses to create these tools in order to manipulate data for making informed business decisions. The focus is to examine what skills employers are…

Thermodynamics of higher dimensional black holes with higher order thermal fluctuations

NASA Astrophysics Data System (ADS)

Pourhassan, B.; Kokabi, K.; Rangyan, S.

2017-12-01

In this paper, we consider higher order corrections of the entropy, which coming from thermal fluctuations, and find their effect on the thermodynamics of higher dimensional charged black holes. Leading order thermal fluctuation is logarithmic term in the entropy while higher order correction is proportional to the inverse of original entropy. We calculate some thermodynamics quantities and obtain the effect of logarithmic and higher order corrections of entropy on them. Validity of the first law of thermodynamics investigated and Van der Waals equation of state of dual picture studied. We find that five-dimensional black hole behaves as Van der Waals, but higher dimensional case have not such behavior. We find that thermal fluctuations are important in stability of black hole hence affect unstable/stable black hole phase transition.

Ab initio calculations of the Fe(II) and Fe(III) isotopic effects in citrates, nicotianamine, and phytosiderophore, and new Fe isotopic measurements in higher plants

NASA Astrophysics Data System (ADS)

Moynier, Frédéric; Fujii, Toshiyuki; Wang, Kun; Foriel, Julien

2013-05-01

Iron is one of the most abundant transition metal in higher plants and variations in its isotopic compositions can be used to trace its utilization. In order to better understand the effect of plant-induced isotopic fractionation on the global Fe cycling, we have estimated by quantum chemical calculations the magnitude of the isotopic fractionation between different Fe species relevant to the transport and storage of Fe in higher plants: Fe(II)-citrate, Fe(III)-citrate, Fe(II)-nicotianamine, and Fe(III)-phytosiderophore. The ab initio calculations show firstly, that Fe(II)-nicotianamine is ˜3‰ (56Fe/54Fe) isotopically lighter than Fe(III)-phytosiderophore; secondly, even in the absence of redox changes of Fe, change in the speciation alone can create up to ˜1.5‰ isotopic fractionation. For example, Fe(III)-phytosiderophore is up to 1.5‰ heavier than Fe(III)-citrate2 and Fe(II)-nicotianamine is up to 1‰ heavier than Fe(II)-citrate. In addition, in order to better understand the Fe isotopic fractionation between different plant components, we have analyzed the iron isotopic composition of different organs (roots, seeds, germinated seeds, leaves and stems) from six species of higher plants: the dicot lentil (Lens culinaris), and the graminaceous monocots Virginia wild rye (Elymus virginicus), Johnsongrass (Sorghum halepense), Kentucky bluegrass (Poa pratensis), river oat (Uniola latifolia), and Indian goosegrass (Eleusine indica). The calculations may explain that the roots of strategy-II plants (Fe(III)-phytosiderophore) are isotopically heavier (by about 1‰ for the δ56Fe) than the upper parts of the plants (Fe transported as Fe(III)-citrate in the xylem or Fe(II)-nicotianamine in the phloem). In addition, we suggest that the isotopic variations observed between younger and older leaves could be explained by mixing of Fe received from the xylem and the phloem.

Cumulative query method for influenza surveillance using search engine data.

PubMed

Seo, Dong-Woo; Jo, Min-Woo; Sohn, Chang Hwan; Shin, Soo-Yong; Lee, JaeHo; Yu, Maengsoo; Kim, Won Young; Lim, Kyoung Soo; Lee, Sang-Il

2014-12-16

Internet search queries have become an important data source in syndromic surveillance system. However, there is currently no syndromic surveillance system using Internet search query data in South Korea. The objective of this study was to examine correlations between our cumulative query method and national influenza surveillance data. Our study was based on the local search engine, Daum (approximately 25% market share), and influenza-like illness (ILI) data from the Korea Centers for Disease Control and Prevention. A quota sampling survey was conducted with 200 participants to obtain popular queries. We divided the study period into two sets: Set 1 (the 2009/10 epidemiological year for development set 1 and 2010/11 for validation set 1) and Set 2 (2010/11 for development Set 2 and 2011/12 for validation Set 2). Pearson's correlation coefficients were calculated between the Daum data and the ILI data for the development set. We selected the combined queries for which the correlation coefficients were .7 or higher and listed them in descending order. Then, we created a cumulative query method n representing the number of cumulative combined queries in descending order of the correlation coefficient. In validation set 1, 13 cumulative query methods were applied, and 8 had higher correlation coefficients (min=.916, max=.943) than that of the highest single combined query. Further, 11 of 13 cumulative query methods had an r value of ≥.7, but 4 of 13 combined queries had an r value of ≥.7. In validation set 2, 8 of 15 cumulative query methods showed higher correlation coefficients (min=.975, max=.987) than that of the highest single combined query. All 15 cumulative query methods had an r value of ≥.7, but 6 of 15 combined queries had an r value of ≥.7. Cumulative query method showed relatively higher correlation with national influenza surveillance data than combined queries in the development and validation set.

Object Based Numerical Zooming Between the NPSS Version 1 and a 1-Dimensional Meanline High Pressure Compressor Design Analysis Code

NASA Technical Reports Server (NTRS)

Follen, G.; Naiman, C.; auBuchon, M.

2000-01-01

Within NASA's High Performance Computing and Communication (HPCC) program, NASA Glenn Research Center is developing an environment for the analysis/design of propulsion systems for aircraft and space vehicles called the Numerical Propulsion System Simulation (NPSS). The NPSS focuses on the integration of multiple disciplines such as aerodynamics, structures, and heat transfer, along with the concept of numerical zooming between 0- Dimensional to 1-, 2-, and 3-dimensional component engine codes. The vision for NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Current "state-of-the-art" engine simulations are 0-dimensional in that there is there is no axial, radial or circumferential resolution within a given component (e.g. a compressor or turbine has no internal station designations). In these 0-dimensional cycle simulations the individual component performance characteristics typically come from a table look-up (map) with adjustments for off-design effects such as variable geometry, Reynolds effects, and clearances. Zooming one or more of the engine components to a higher order, physics-based analysis means a higher order code is executed and the results from this analysis are used to adjust the 0-dimensional component performance characteristics within the system simulation. By drawing on the results from more predictive, physics based higher order analysis codes, "cycle" simulations are refined to closely model and predict the complex physical processes inherent to engines. As part of the overall development of the NPSS, NASA and industry began the process of defining and implementing an object class structure that enables Numerical Zooming between the NPSS Version I (0-dimension) and higher order 1-, 2- and 3-dimensional analysis codes. The NPSS Version I preserves the historical cycle engineering practices but also extends these classical practices into the area of numerical zooming for use within a companies' design system. What follows here is a description of successfully zooming I-dimensional (row-by-row) high pressure compressor results back to a NPSS engine 0-dimension simulation and a discussion of the results illustrated using an advanced data visualization tool. This type of high fidelity system-level analysis, made possible by the zooming capability of the NPSS, will greatly improve the fidelity of the engine system simulation and enable the engine system to be "pre-validated" prior to commitment to engine hardware.

The relationship between wisdom and abstinence behaviors in women in recovery from substance abuse.

PubMed

Digangi, Julia A; Jason, Leonard A; Mendoza, Leslie; Miller, Steve A; Contreras, Richard

2013-01-01

Wisdom is theorized to be an important construct in recovery from substance abuse. In order to explore the role of wisdom in substance abuse recovery behaviors, the present study had two goals. First, it sought to examine the factor structure of a wisdom scale, the Foundational Value Scale (FVS) in a community sample of women in recovery from substance abuse. Second, the study examined how wisdom predicted the women's beliefs about their ability to abstain from future substance use. 116 women in recovery from substance abuse disorders were recruited from self-run recovery homes and a substance abuse recovery convention. Results from an exploratory factor analysis indicated that a modified version of the FVS has good internal consistency reliability and is composed of three wisdom-related dimensions. The three factors were then used to create a higher-order wisdom factor in a structural equation model (SEM) that was used to predict abstinence self-efficacy behaviors. Results from the SEM showed that the wisdom factor was predictive of greater abstinence self-efficacy behaviors. The FVS was found to be a reliable measure with women in recovery from substance abuse. In addition, wisdom predicted beliefs about self-efficacy such that those who reported higher levels of wisdom felt more confident in their abilities to abstain from alcohol. The results of this study indicate that wisdom is an important construct in the abstinence behaviors of women who are in recovery from substance abuse disorders.

User's Manual and Final Report for Hot-SMAC GUI Development

NASA Technical Reports Server (NTRS)

Yarrington, Phil

2001-01-01

A new software package called Higher Order Theory-Structural/Micro Analysis Code (HOT-SMAC) has been developed as an effective alternative to the finite element approach for Functionally Graded Material (FGM) modeling. HOT-SMAC is a self-contained package including pre- and post-processing through an intuitive graphical user interface, along with the well-established Higher Order Theory for Functionally Graded Materials (HOTFGM) thermomechanical analysis engine. This document represents a Getting Started/User's Manual for HOT-SMAC and a final report for its development. First, the features of the software are presented in a simple step-by-step example where a HOT-SMAC model representing a functionally graded material is created, mechanical and thermal boundary conditions are applied, the model is analyzed and results are reviewed. In a second step-by-step example, a HOT-SMAC model of an actively cooled metallic channel with ceramic thermal barrier coating is built and analyzed. HOT-SMAC results from this model are compared to recently published results (NASA/TM-2001-210702) for two grid densities. Finally, a prototype integration of HOTSMAC with the commercially available HyperSizer(R) structural analysis and sizing software is presented. In this integration, local strain results from HyperSizer's structural analysis are fed to a detailed HOT-SMAC model of the flange-to-facesheet bond region of a stiffened panel. HOT-SMAC is then used to determine the peak shear and peel (normal) stresses between the facesheet and bonded flange of the panel and determine the "free edge" effects.

Applied information system-based in enhancing students' understanding towards higher order thinking (HOTS)

NASA Astrophysics Data System (ADS)

Hua, Ang Kean; Ping, Owi Wei

2017-05-01

The application of information and communications technology (ICT) had become more important in our daily life, especially in educational field. Teachers are encouraged to use information system-based in teaching Mathematical courses. Higher Order Thinking Skills (HOTS) approach is unable to explain using chalk and talk methods. It needs students to analyze, evaluate, and create by their own natural abilities. The aim of this research study was to evaluate the effectiveness of the application information system-based in enhance the students understanding about HOTS question. Mixed-methods or quantitative and qualitative approach was applied in collecting data, which involve only the standard five students and the teachers in Sabak Bernam, Selangor. Pra-postests was held before and after using information system-based in teaching to evaluate the students' understanding. The result from post-test indicates significant improvement which proves that the use of information system based able to enhance students' understanding about HOTS question and solve it. There were several factor influenced the students such as students' attitude, teachers attraction, school facilities, and computer approach. Teachers play an important role in attracting students to learn. Therefore, the school should provide a conducive learning environment and good facilities for students to learn so that they are able to access more information and always exposed to new knowledge. As conclusion, information system-based are able to enhance students understanding the need of HOTS questions and solve it.

Slow decomposition of lower order roots: a key mechanism of root carbon and nutrient retention in the soil.

PubMed

Fan, Pingping; Guo, Dali

2010-06-01

Among tree fine roots, the distal small-diameter lateral branches comprising first- and second-order roots lack secondary (wood) development. Therefore, these roots are expected to decompose more rapidly than higher order woody roots. But this prediction has not been tested and may not be correct. Current evidence suggests that lower order roots may decompose more slowly than higher order roots in tree species associated with ectomycorrhizal (EM) fungi because they are preferentially colonized by fungi and encased by a fungal sheath rich in chitin (a recalcitrant compound). In trees associated with arbuscular mycorrhizal (AM) fungi, lower order roots do not form fungal sheaths, but they may have poorer C quality, e.g. lower concentrations of soluble carbohydrates and higher concentrations of acid-insolubles than higher order roots, thus may decompose more slowly. In addition, litter with high concentrations of acid insolubles decomposes more slowly under higher N concentrations (such as lower order roots). Therefore, we propose that in both AM and EM trees, lower order roots decompose more slowly than higher order roots due to the combination of poor C quality and high N concentrations. To test this hypothesis, we examined decomposition of the first six root orders in Fraxinus mandshurica (an AM species) and Larix gmelinii (an EM species) using litterbag method in northeastern China. We found that lower order roots of both species decomposed more slowly than higher order roots, and this pattern appears to be associated mainly with initial C quality and N concentrations. Because these lower order roots have short life spans and thus dominate root mortality, their slow decomposition implies that a substantial fraction of the stable soil organic matter pool is derived from these lower order roots, at least in the two species we studied.

Virtual Nitrogen Losses from Organic Food Production

NASA Astrophysics Data System (ADS)

Cattell Noll, L.; Galloway, J. N.; Leach, A. M.; Seufert, V.; Atwell, B.; Shade, J.

2015-12-01

Reactive nitrogen (Nr) is necessary for crop and animal production, but when it is lost to the environment, it creates a cascade of detrimental environmental impacts. The nitrogen challenge is to maximize the food production benefits of Nr, while minimizing losses to the environment. The first nitrogen footprint tool was created in 2012 to help consumers learn about the Nr losses to the environment that result from an individual's lifestyle choices. The nitrogen lost during food production was estimated with virtual nitrogen factors (VNFs) that quantify the amount of nitrogen lost to the environment per unit nitrogen consumed. Alternative agricultural systems, such as USDA certified organic farms, utilize practices that diverge from conventional production. In order to evaluate the potential sustainability of these alternative agricultural systems, our team calculated VNFs that reflect organic production. Initial data indicate that VNFs for organic grains and organic starchy roots are comparable to, but slightly higher than conventional (+10% and +20% respectively). In contrast, the VNF for organic vegetables is significantly higher (+90%) and the VNF for organic legumes is significantly lower (-90%). Initial data on organic meat production shows that organic poultry and organic pigmeat are comparable to conventional production (both <5% difference), but that the organic beef VNF is significantly higher (+30%). These data show that in some cases organic and conventional production are comparable in terms of nitrogen efficiency. However, since conventional production relies heavily on the creation of new reactive nitrogen (Haber-Bosch, biological nitrogen fixation) and organic production primarily utilizes already existing reactive nitrogen (manure, crop residue, compost), the data also show that organic production contributes less new reactive nitrogen to the environment than conventional production (approximately 70% less). Therefore, we conclude that on a local scale, nitrogen losses from organic production are comparable to conventional production, but that organic production introduces less new reactive nitrogen to the global pool.

[Astigmatic keratotomy with the femtosecond laser: correction of high astigmatisms after keratoplasty].

PubMed

Kook, D; Bühren, J; Klaproth, O K; Bauch, A S; Derhartunian, V; Kohnen, T

2011-02-01

The purpose of this study was to evaluate a novel technique for the correction of postoperative astigmatism after penetrating keratoplasty with the use of the femtosecond laser creating astigmatic keratotomies (femto-AK) in the scope of a retrospective case series. Clinical data of ten eyes of nine patients with high residual astigmatism after penetrating keratoplasty undergoing paired femto-AK using a 60-kHz femtosecond laser (IntraLase™, AMO) were analyzed. A new software algorithm was used to create paired arcuate cuts deep into the donor corneal button with different cut angles. Target values were refraction, uncorrected visual acuity, best corrected visual acuity, topographic data (Orbscan®, Bausch & Lomb, Rochester, NY, USA), and corneal wavefront analysis using Visual Optics Lab (VOL)-Pro 7.14 Software (Sarver and Associates). Vector analysis was performed using the Holladay, Cravy and Koch formula. Statistical analysis was performed to detect significances between visits using Student's t test. All procedures were performed without any major complications. The mean follow-up was 13 months. The mean patient age was 48.7 years. The preoperative mean uncorrected visual acuity (logMAR) was 1.27, best corrected visual acuity 0.55, mean subjective cylinder -7.4 D, and mean topometric astigmatism 9.3 D. The postoperative mean uncorrected visual acuity (logMAR) was 1.12, best corrected visual acuity 0.47, mean subjective cylinder -4.1 D, and mean topometric astigmatism 6.5 D. Differences between corneal higher order aberrations showed a high standard deviation and were therefore not statistically significant. Astigmatic keratotomy using the femtosecond laser seems to be a safe and effective tool for the correction of higher corneal astigmatisms. Due to the biomechanical properties of the cornea and missing empirical data for the novel femto-AK technology, higher numbers of patients are necessary to develop optimal treatment nomograms.

The Combination of Sonography and Physical Examination Improves the Patency and Suitability of Hemodialysis Arteriovenous Fistula in Vascular Access.

PubMed

Mat Said, Normawati; Musa, Kamarul Imran; Mohamed Daud, Mohamed Ashraf; Haron, Juhara

2016-07-01

We compared the patency and the suitability of arteriovenous fistula (AVF) created for vascular access by two approaches: (a) physical examination with preoperative vascular mapping and (b) physical examination alone. We compared the patency and the suitability of AVF created in patients for dialysis. There were two cohorts of patients of 79 patients each: (a) patients with AVF created based on the combination of physical examination and preoperative vascular mapping (PE+VM) and (b) patients with AVF created based on physical examination (PE) alone. Fistula patency is defined as clinical detection of thrill (or auscultation) of murmur over the fistula and coded as having thrills (patent) versus not having thrills (not patent). Suitability of fistula is defined as functioning AVF (AVF can be adequately used via 2-needle cannulation for dialysis) and coded as suitable versus not suitable. AVF created after the preoperative vascular mapping (PE+VM) has 5.70 (at six weeks) and 3.76 (at three months) times higher chance for patency, and 3.08 times higher chance for suitable AVF for dialysis than AVF created after the physical examination (PE) alone. Physical examination with preoperative ultrasound mapping (PE+VM) significantly improves the short term patency and the suitability of AVF for dialysis.

Use of a systematic risk analysis method (FMECA) to improve quality in a clinical laboratory procedure.

PubMed

Serafini, A; Troiano, G; Franceschini, E; Calzoni, P; Nante, N; Scapellato, C

2016-01-01

Risk management is a set of actions to recognize or identify risks, errors and their consequences and to take the steps to counter it. The aim of our study was to apply FMECA (Failure Mode, Effects and Criticality Analysis) to the Activated Protein C resistance (APCR) test in order to detect and avoid mistakes in this process. We created a team and the process was divided in phases and sub phases. For each phase we calculated the probability of occurrence (O) of an error, the detectability score (D) and the severity (S). The product of these three indexes yields the RPN (Risk Priority Number). Phases with a higher RPN need corrective actions with a higher priority. The calculation of RPN showed that more than 20 activities have a score higher than 150 and need important preventive actions; 8 have a score between 100 and 150. Only 23 actions obtained an acceptable score lower than 100. This was one of the first experience of application of FMECA analysis to a laboratory process, and the first one which applies this technique to the identification of the factor V Leiden, and our results confirm that FMECA could be a simple, powerful and useful tool in risk management and helps to identify quickly the criticality in a laboratory process.

Radiation Tolerant Electronics and Digital Processing for the Phase-I Trigger Readout Upgrade of the ATLAS Liquid Argon Calorimeters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milic, A.

The high luminosities of L > 10{sup 34} cm{sup -2}s{sup -1} at the Large Hadron Collider (LHC) at CERN produce an intense radiation environment that the detectors and their electronics must withstand. The ATLAS detector is a multi-purpose apparatus constructed to explore the new particle physics regime opened by the LHC. Of the many decay particles observed by the ATLAS detector, the energy of the created electrons and photons is measured by a sampling calorimeter technique that uses Liquid Argon (LAr) as its active medium. The front end (FE) electronic readout of the ATLAS LAr calorimeter located on the detectormore » itself consists of a combined analog and digital processing system. In order to exploit the higher luminosity while keeping the same trigger bandwidth of 100 kHz, higher transverse granularity, higher resolution and longitudinal shower shape information will be provided from the LAr calorimeter to the Level-l trigger processors. New trigger readout electronics have been designed for this purpose, which will withstand the radiation dose levels expected for an integrated luminosity of 3000 fb{sup -1} during the high luminosity LHC (HL-LHC), which is well above the original LHC design qualifications. (authors)« less

The trend of occupational injuries in Korea from 2001 to 2010.

PubMed

Rhee, Kyung Yong; Choe, Seong Weon; Kim, Young Sun; Koo, Kwon Ho

2013-03-01

This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety.

The Trend of Occupational Injuries in Korea from 2001 to 2010

PubMed Central

Rhee, Kyung Yong; Choe, Seong Weon; Koo, Kwon Ho

2013-01-01

Objectives This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Methods Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. Results The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. Conclusion This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety. PMID:23515324

Changes in the distribution of high-risk births associated with changes in contraceptive prevalence.

PubMed

Stover, John; Ross, John

2013-01-01

Several birth characteristics are associated with high mortality risk: very young or old mothers, short birth intervals and high birth order. One justification for family planning programs is the health benefits associated with better spacing and timing of births. This study examines the extent to which the prevalence of these risk factors changes as a country transitions from high to low fertility. We use data from 194 national surveys to examine both cross section and within-country variation in these risk factors as they relate to the total fertility rate. Declines in the total fertility rate are associated with large declines in the proportion of high order births, those to mothers over the age of 34 and those with multiple risk factors; as well as to increasing proportions of first order births. There is little change in the proportion of births with short birth intervals except in sub-Saharan Africa. The use of family planning is strongly associated with fertility declines. The proportion of second and higher order births with demographic risk factors declines substantially as fertility declines. This creates a potential for reducing child mortality rates. Some of the reduction comes from modifying the birth interval distribution or by bringing maternal age at the time of birth into the 'safe' range of 18-35 years, and some comes from the actual elimination of births that would have a high mortality risk (high parity births).

Phyllotactic arrangements of optical elements

NASA Astrophysics Data System (ADS)

Horacek, M.; Meluzin, P.; Kratky, S.; Matejka, M.; Kolarik, V.

2017-05-01

Phyllotaxy studies arrangements of biological entities, e.g. a placement of seeds in the flower head. Vogel (1979) presented a phyllotactic model based on series of seeds ordered along a primary spiral. This arrangement allows each seed to occupy the same area within a circular flower head. Recently, a similar arrangement of diffraction primitives forming a planar relief diffractive structure was presented. The planar relief structure was used for benchmarking and testing purposes of the electron beam writer patterning process. This contribution presents the analysis of local periods and azimuths of optical phyllotactic arrangements. Two kinds of network characteristic triangles are introduced. If the discussed planar structure has appropriate size and density, diffraction of the incoming light creates characteristic a phyllotactic diffraction pattern. Algorithms enabling the analysis of such behavior were developed and they were validated by fabricated samples of relief structures. Combined and higher diffraction orders are also analyzed. Different approaches enabling the creation of phyllotactic diffractive patterns are proposed. E-beam lithography is a flexible technology for various diffraction gratings origination. The e-beam patterning typically allows for the creation of optical diffraction gratings in the first diffraction order. Nevertheless, this technology enables also more complex grating to be prepared, e.g. blazed gratings and zero order gratings. Moreover, the mentioned kinds of gratings can be combined within one planar relief structure. The practical part of the presented work deals with the nano patterning of such structures by using two different types of the e-beam pattern generators.

Achieving mask order processing automation, interoperability and standardization based on P10

NASA Astrophysics Data System (ADS)

Rodriguez, B.; Filies, O.; Sadran, D.; Tissier, Michel; Albin, D.; Stavroulakis, S.; Voyiatzis, E.

2007-02-01

Last year the MUSCLE (Masks through User's Supply Chain: Leadership by Excellence) project was presented. Here is the project advancement. A key process in mask supply chain management is the exchange of technical information for ordering masks. This process is large, complex, company specific and error prone, and leads to longer cycle times and higher costs due to missing or wrong inputs. Its automation and standardization could produce significant benefits. We need to agree on the standard for mandatory and optional parameters, and also a common way to describe parameters when ordering. A system was created to improve the performance in terms of Key Performance Indicators (KPIs) such as cycle time and cost of production. This tool allows us to evaluate and measure the effect of factors, as well as the effect of implementing the improvements of the complete project. Next, a benchmark study and a gap analysis were performed. These studies show the feasibility of standardization, as there is a large overlap in requirements. We see that the SEMI P10 standard needs enhancements. A format supporting the standard is required, and XML offers the ability to describe P10 in a flexible way. Beyond using XML for P10, the semantics of the mask order should also be addressed. A system design and requirements for a reference implementation for a P10 based management system are presented, covering a mechanism for the evolution and for version management and a design for P10 editing and data validation.

How might the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 affect the financial viability of rural pharmacies? An analysis of preimplementation prescription volume and payment sources in rural and urban areas.

PubMed

Fraher, Erin P; Slifkin, Rebecca T; Smith, Laura; Randolph, Randy; Rudolf, Matthew; Holmes, George M

2005-01-01

Passage of the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (MMA) has created interest in how the legislation will affect access to prescription drugs among rural beneficiaries. Policy attention has focused to a much lesser degree on the implications of the MMA for the financial viability of rural pharmacies. This article presents descriptive information on mail-order prescriptions, volume, and payer type of retail prescriptions in rural vs urban areas. Together, these data provide a baseline for evaluating how implementation of the MMA may affect the financial viability of rural independent pharmacies. Projections of prescriptions dispensed from retail and mail-order pharmacies in 2002 for the total US and a sample of 17 states were obtained from IMS Health. The volume of mail-order prescriptions is small. Rural providers prescribed fewer retail and mail-order prescriptions per person, but more units per person. Rural areas have a higher percentage of prescriptions paid for by cash (18% vs 13%) and Medicaid (16% vs 10%) and a lower percentage of third-party payers than urban areas. Significant variation in volume and payer type exists between states. Rural, independent pharmacies may be negatively affected by MMA implementation as business shifts from cash to third-party reimbursement. The high degree of variation between states also has potentially important implications for the implementation of Prescription Drug Plan regions under MMA.

Using an Iterative Fourier Series Approach in Determining Orbital Elements of Detached Visual Binary Stars

NASA Astrophysics Data System (ADS)

Tupa, Peter R.; Quirin, S.; DeLeo, G. G.; McCluskey, G. E., Jr.

2007-12-01

We present a modified Fourier transform approach to determine the orbital parameters of detached visual binary stars. Originally inspired by Monet (ApJ 234, 275, 1979), this new method utilizes an iterative routine of refining higher order Fourier terms in a manner consistent with Keplerian motion. In most cases, this approach is not sensitive to the starting orbital parameters in the iterative loop. In many cases we have determined orbital elements even with small fragments of orbits and noisy data, although some systems show computational instabilities. The algorithm was constructed using the MAPLE mathematical software code and tested on artificially created orbits and many real binary systems, including Gliese 22 AC, Tau 51, and BU 738. This work was supported at Lehigh University by NSF-REU grant PHY-9820301.

A 3-component laser-Doppler velocimeter data acquisition and reduction system

NASA Technical Reports Server (NTRS)

Rodman, L. C.; Bell, J. H.; Mehta, R. D.

1985-01-01

A laser doppler velocimeter capable of measuring all three components of velocity simultaneously in low-speed flows is described. All the mean velocities, Reynolds stresses, and higher-order products can be evaluated. The approach followed is to split one of the two colors used in a 2-D system, thus creating a third set of beams which is then focused in the flow from an off-axis direction. The third velocity component is computed from the known geometry of the system. The laser optical hardware and the data acquisition electronics are described in detail. In addition, full operating procedures and listings of the software (written in BASIC and ASSEMBLY languages) are also included. Some typical measurements obtained with this system in a vortex/mixing layer interaction are presented and compared directly to those obtained with a cross-wire system.

Multiple bunch HOM evaluation for ERL cavities

DOE PAGES

Xu, Chen; Ben-Zvi, I.; Blaskiewicz, Michael M.; ...

2017-06-15

In this paper we investigate the effect of the bunch pattern in a linac on the Higher Order Mode (HOM) power generation. The future ERL-based electron–ion collider eRHIC at BNL is used as an illustrative example. This ERL has multiple high current Superconducting Radiofrequency (SRF) 5-cell cavities. The HOM power generated when a single bunch traverses the cavity is estimated by the corresponding loss factor. Multiple re-circulations through the Energy Recovery Linac (ERL) create a specific bunch pattern. In this case the loss factor can be different than the single bunch loss factor. HOM power can vary dramatically when themore » ERL bunch pattern changes. The HOM power generation can be surveyed in the time and frequency domains. We estimate the average HOM power in a 5-cell cavity with different ERL bunch patterns.« less

Spectral modeling of laser-produced underdense titanium plasmas

NASA Astrophysics Data System (ADS)

Chung, Hyun-Kyung; Back, Christina A.; Scott, Howard A.; Constantin, Carmen; Lee, Richard W.

2004-11-01

Experiments were performed at the NIKE laser to create underdense low-Z plasmas with a small amount of high-Z dopant in order to study non-LTE population kinetics. An absolutely calibrated spectra in 470-3000 eV was measured in time-resolved and time-averaged fashion from SiO2 aerogel target with 3% Ti dopant. K-shell Ti emission was observed as well as L-shell Ti emission. Time-resolved emission show that lower energy photons peak later than higher energy photons due to plasma cooling. In this work, we compare the measured spectra with non-LTE spectral calculations of titanium emission at relatively low temperatures < 1 keV and electron densities from 1e19 to 1e21 cm-3. A temperature diagnostics using the charge state distributions dominated by L-shell ions will be discussed.

[The RUTA project (Registro UTIC Triveneto ANMCO). An e-network for the coronary care units for acute myocardial infarction].

PubMed

Di Chiara, Antonio; Zonzin, Pietro; Pavoni, Daisy; Fioretti, Paolo Maria

2003-06-01

In the era of evidence-based medicine, the monitoring of the adherence to the guidelines is fundamental, in order to verify the diagnostic and therapeutic processes. Informatic paperless databases allow a higher data quality, lower costs and timely analysis with overall advantages over the traditional surveys. The RUTA project (acronym of Triveneto Registry of ANMCO CCUs) was designed in 1999, aiming at creating an informatic network among the coronary care units of a large Italian region, for a permanent survey of patients admitted for acute myocardial infarction. Information ranges from the pre-hospital phase to discharge, including all relevant clinical and management variables. The database uses DBMS Personal Oracle and Power-Builder as user interface, on Windows platform. Anonymous data are sent to a central server.

Inter-Institutional Partnerships Propel A Successful Collaborative Undergraduate Degree Program In Chemistry

PubMed Central

Wang, Qiquan

2013-01-01

Small private liberal arts colleges are increasingly tuition-dependent and mainly attract students by creating student-centered learning communities. On the other hand, larger universities tend to be trendsetters where its faculty tend to seek intellectual independence and are involved in career focused cutting-edge research. The Institutional Development Awards (IDeA) and Experimental Program to Stimulate Competitive Research (EPSCoR) are federal-state-university partnerships that builds basic research infrastructure and coax the state-wide higher education institutions to collaborate with each other in order to enhance their competitiveness. As a result in Delaware, Wesley College instituted curricular and operational changes to launch an undergraduate program in biological chemistry where its students take three upper division chemistry courses and can choose to participate in annual summer undergraduate internships at nearby Delaware State University. PMID:24273464

Multiple bunch HOM evaluation for ERL cavities

NASA Astrophysics Data System (ADS)

Xu, Chen; Ben-Zvi, I.; Blaskiewicz, Michael M.; Hao, Yue; Ptitsyn, Vadim

2017-09-01

In this work we investigate the effect of the bunch pattern in a linac on the Higher Order Mode (HOM) power generation. The future ERL-based electron-ion collider eRHIC at BNL is used as an illustrative example. This ERL has multiple high current Superconducting Radiofrequency (SRF) 5-cell cavities. The HOM power generated when a single bunch traverses the cavity is estimated by the corresponding loss factor. Multiple re-circulations through the Energy Recovery Linac (ERL) create a specific bunch pattern. In this case the loss factor can be different than the single bunch loss factor. HOM power can vary dramatically when the ERL bunch pattern changes. The HOM power generation can be surveyed in the time and frequency domains. We estimate the average HOM power in a 5-cell cavity with different ERL bunch patterns.

The therapeutic factor inventory-8: Using item response theory to create a brief scale for continuous process monitoring for group psychotherapy.

PubMed

Tasca, Giorgio A; Cabrera, Christine; Kristjansson, Elizabeth; MacNair-Semands, Rebecca; Joyce, Anthony S; Ogrodniczuk, John S

2016-01-01

We tested a very brief version of the 23-item Therapeutic Factors Inventory-Short Form (TFI-S), and describe the use of Item Response Theory (IRT) for the purpose of developing short and reliable scales for group psychotherapy. Group therapy patients (N = 578) completed the TFI-S on one occasion, and their data were used for the IRT analysis. Of those, 304 completed the TFI-S and other measures on more than one occasion to assess sensitivity to change, concurrent, and predictive validity of the brief version. Results suggest that the new TFI-8 is a brief, reliable, and valid measure of a higher-order group therapeutic factor. The TFI-8 may be used for continuous process measurement and feedback to improve the functioning of therapy groups.

Operating systems. [of computers

NASA Technical Reports Server (NTRS)

Denning, P. J.; Brown, R. L.

1984-01-01

A counter operating system creates a hierarchy of levels of abstraction, so that at a given level all details concerning lower levels can be ignored. This hierarchical structure separates functions according to their complexity, characteristic time scale, and level of abstraction. The lowest levels include the system's hardware; concepts associated explicitly with the coordination of multiple tasks appear at intermediate levels, which conduct 'primitive processes'. Software semaphore is the mechanism controlling primitive processes that must be synchronized. At higher levels lie, in rising order, the access to the secondary storage devices of a particular machine, a 'virtual memory' scheme for managing the main and secondary memories, communication between processes by way of a mechanism called a 'pipe', access to external input and output devices, and a hierarchy of directories cataloguing the hardware and software objects to which access must be controlled.

Multiple bunch HOM evaluation for ERL cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Chen; Ben-Zvi, I.; Blaskiewicz, Michael M.

In this paper we investigate the effect of the bunch pattern in a linac on the Higher Order Mode (HOM) power generation. The future ERL-based electron–ion collider eRHIC at BNL is used as an illustrative example. This ERL has multiple high current Superconducting Radiofrequency (SRF) 5-cell cavities. The HOM power generated when a single bunch traverses the cavity is estimated by the corresponding loss factor. Multiple re-circulations through the Energy Recovery Linac (ERL) create a specific bunch pattern. In this case the loss factor can be different than the single bunch loss factor. HOM power can vary dramatically when themore » ERL bunch pattern changes. The HOM power generation can be surveyed in the time and frequency domains. We estimate the average HOM power in a 5-cell cavity with different ERL bunch patterns.« less

Direct observation of hierarchical nucleation of martensite and size-dependent superelasticity in shape memory alloys.

PubMed

Liu, Lifeng; Ding, Xiangdong; Li, Ju; Lookman, Turab; Sun, Jun

2014-02-21

Martensitic transformation usually creates hierarchical internal structures beyond mere change of the atomic crystal structure. Multi-stage nucleation is thus required, where nucleation (level-1) of the underlying atomic crystal lattice does not have to be immediately followed by the nucleation of higher-order superstructures (level-2 and above), such as polysynthetic laths. Using in situ transmission electron microscopy (TEM), we directly observe the nucleation of the level-2 superstructure in a Cu-Al-Ni single crystal under compression, with critical super-nuclei size L2c around 500 nm. When the sample size D decreases below L2c, the superelasticity behavior changes from a flat stress plateau to a continuously rising stress-strain curve. Such size dependence definitely would impact the application of shape memory alloys in miniaturized MEMS/NEMS devices.

High-density two-dimensional electron system induced by oxygen vacancies in ZnO

NASA Astrophysics Data System (ADS)

Rödel, T. C.; Dai, J.; Fortuna, F.; Frantzeskakis, E.; Le Fèvre, P.; Bertran, F.; Kobayashi, M.; Yukawa, R.; Mitsuhashi, T.; Kitamura, M.; Horiba, K.; Kumigashira, H.; Santander-Syro, A. F.

2018-05-01

We realize a two-dimensional electron system (2DES) in ZnO by simply depositing pure aluminum on its surface in ultrahigh vacuum and characterize its electronic structure by using angle-resolved photoemission spectroscopy. The aluminum oxidizes into alumina by creating oxygen vacancies that dope the bulk conduction band of ZnO and confine the electrons near its surface. The electron density of the 2DES is up to two orders of magnitude higher than those obtained in ZnO heterostructures. The 2DES shows two s -type subbands, that we compare with the d -like 2DESs in titanates, with clear signatures of many-body interactions that we analyze through a self-consistent extraction of the system self-energy and a modeling as a coupling of a two-dimensional Fermi liquid with a Debye distribution of phonons.

Double-Paddle Oscillators as Probes of Quantum Turbulence in the Zero Temperature Limit

NASA Astrophysics Data System (ADS)

Schmoranzer, David; Jackson, Martin; Zemma, Elisa; Luzuriaga, Javier

2017-06-01

We present a technical report on our tests of a double-paddle oscillator as a detector of quantum turbulence in superfluid 4He at low temperatures ranging from 20 to 1100 mK. The device, known to operate well in the two-fluid regime (Zemma and Luzuriaga in J Low Temp Phys 166:171-181, 2012), is also capable of detecting quantum turbulence in the zero temperature limit. The oscillator demonstrated Lorentzian responses with quality factors of order 10^5 in vacuum, and displayed negative-Duffing resonances in liquid, even at moderate drives. In superfluid He-II at low temperatures, its sensitivity was adversely affected by acoustic damping at higher harmonics. While it successfully created and detected the quantum turbulence, its overall performance does not compare favourably with other oscillators such as tuning forks.

High sensitivity long-period grating-based temperature monitoring using a wide wavelength range to 2.2 μm

NASA Astrophysics Data System (ADS)

Venugopalan, Thillainathan; Yeo, Teck L.; Sun, Tong; Grattan, Kenneth T. V.

2006-12-01

Temperature effects on the various cladding modes of a long-period grating (LPG) fabricated in B-Ge co-doped fibre have been investigated to create a high sensitivity measurement device. The temperature sensitivities of the attenuation bands of the LPG over the wavelength region 1.2-2.2 μm, for a grating with a 330 μm period, were obtained by monitoring the wavelength shift of each attenuation band, with a temperature increment of 20 °C, over the range from 23 °C to 140 °C. The attenuation band appearing over the 1.8-2.0 μm wavelength range has shown a nearly five times higher temperature sensitivity than that of lower order modes, and thus it shows significant promise for fibre optic temperature sensor applications.

Double-deprotected chemically amplified photoresists (DD-CAMP): higher-order lithography

NASA Astrophysics Data System (ADS)

Earley, William; Soucie, Deanna; Hosoi, Kenji; Takahashi, Arata; Aoki, Takashi; Cardineau, Brian; Miyauchi, Koichi; Chun, Jay; O'Sullivan, Michael; Brainard, Robert

2017-03-01

The synthesis and lithographic evaluation of 193-nm and EUV photoresists that utilize a higher-order reaction mechanism of deprotection is presented. Unique polymers utilize novel blocking groups that require two acid-catalyzed steps to be removed. When these steps occur with comparable reaction rates, the overall reaction can be higher order (<= 1.85). The LWR of these resists is plotted against PEB time for a variety of compounds to acquire insight into the effectiveness of the proposed higher-order mechanisms. Evidence acquired during testing of these novel photoresist materials supports the conclusion that higher-order reaction kinetics leads to improved LWR vs. control resists.

Optimizing radiologist e-prescribing of CT oral contrast agent using a protocoling portal.

PubMed

Wasser, Elliot J; Galante, Nicholas J; Andriole, Katherine P; Farkas, Cameron; Khorasani, Ramin

2013-12-01

The purpose of this study is to quantify the time expenditure associated with radiologist ordering of CT oral contrast media when using an integrated protocoling portal and to determine radiologists' perceptions of the ordering process. This prospective study was performed at a large academic tertiary care facility. Detailed timing information for CT inpatient oral contrast orders placed via the computerized physician order entry (CPOE) system was gathered over a 14-day period. Analyses evaluated the amount of physician time required for each component of the ordering process. Radiologists' perceptions of the ordering process were assessed by survey. Descriptive statistics and chi-square analysis were performed. A total of 96 oral contrast agent orders were placed by 13 radiologists during the study period. The average time necessary to create a protocol for each case was 40.4 seconds (average range by subject, 20.0-130.0 seconds; SD, 37.1 seconds), and the average total time to create and sign each contrast agent order was 27.2 seconds (range, 10.0-50.0 seconds; SD, 22.4 seconds). Overall, 52.5% (21/40) of survey respondents indicated that radiologist entry of oral contrast agent orders improved patient safety. A minority of respondents (15% [6/40]) indicated that contrast agent order entry was either very or extremely disruptive to workflow. Radiologist e-prescribing of CT oral contrast agents using CPOE can be embedded in a protocol workflow. Integration of health IT tools can help to optimize user acceptance and adoption.

Questions for Assessing Higher-Order Cognitive Skills: It's Not Just Bloom’s

PubMed Central

Lemons, Paula P.; Lemons, J. Derrick

2013-01-01

We present an exploratory study of biologists’ ideas about higher-order cognition questions. We documented the conversations of biologists who were writing and reviewing a set of higher-order cognition questions. Using a qualitative approach, we identified the themes of these conversations. Biologists in our study used Bloom's Taxonomy to logically analyze questions. However, biologists were also concerned with question difficulty, the length of time required for students to address questions, and students’ experience with questions. Finally, some biologists demonstrated an assumption that questions should have one correct answer, not multiple reasonable solutions; this assumption undermined their comfort with some higher-order cognition questions. We generated a framework for further research that provides an interpretation of participants’ ideas about higher-order questions and a model of the relationships among these ideas. Two hypotheses emerge from this framework. First, we propose that biologists look for ways to measure difficulty when writing higher-order questions. Second, we propose that biologists’ assumptions about the role of questions in student learning strongly influence the types of higher-order questions they write. PMID:23463228

Managing Mass Higher Education in a Period of Austerity

ERIC Educational Resources Information Center

Shattock, Michael

2010-01-01

The higher education systems in Ireland and the UK have seen several decades of remarkable change, particularly with the development of mass higher education. Yet the economic recession is creating a turbulent environment for higher education systems which will pose new challenges for universities. In this article, Michael Shattock argues that…

The Ivory Tower Under Siege.

ERIC Educational Resources Information Center

Smith-Mello, Michal

Increasing public dissatisfaction with the cost and quality of higher education is creating pressure for fundamental change. Higher education is not as certain to produce a higher standard of living as it used to be, and costs are rising faster than the rate of inflation. Declining state contributions to higher education have shifted the financial…

A conceptual snow model with an analytic resolution of the heat and phase change equations

NASA Astrophysics Data System (ADS)

Riboust, Philippe; Le Moine, Nicolas; Thirel, Guillaume; Ribstein, Pierre

2017-04-01

Compared to degree-day snow models, physically-based snow models resolve more processes in an attempt to achieve a better representation of reality. Often these physically-based models resolve the heat transport equations in snow using a vertical discretization of the snowpack. The snowpack is decomposed into several layers in which the mechanical and thermal states of the snow are calculated. A higher number of layers in the snowpack allow for better accuracy but it also tends to increase the computational costs. In order to develop a snow model that estimates the temperature profile of snow with a lower computational cost, we used an analytical decomposition of the vertical profile using eigenfunctions (i.e. trigonometric functions adapted to the specific boundary conditions). The mass transfer of snow melt has also been estimated using an analytical conceptualization of runoff fingering and matrix flow. As external meteorological forcing, the model uses solar and atmospheric radiation, air temperature, atmospheric humidity and precipitations. It has been tested and calibrated at point scale at two different stations in the Alps: Col de Porte (France, 1325 m) and Weissfluhjoch (Switzerland, 2540 m). A sensitivity analysis of model parameters and model inputs will be presented together with a comparison with measured snow surface temperature, SWE, snow depth, temperature profile and snow melt data. The snow model is created in order to be ultimately coupled with hydrological models for rainfall-runoff modeling in mountainous areas. We hope to create a model faster than physically-based models but capable to estimate more physical processes than degree-day snow models. This should help to build a more reliable snow model capable of being easily calibrated by remote sensing and in situ observation or to assimilate these data for forecasting purposes.

Characterising dust in JET with the new ITER-like wall

NASA Astrophysics Data System (ADS)

Flanagan, J. C.; Sertoli, M.; Bacharis, M.; Matthews, G. F.; de Vries, P. C.; Widdowson, A.; Coffey, I. H.; Arnoux, G.; Sieglin, B.; Brezinsek, S.; Coenen, J. W.; Marsen, S.; Craciunescu, T.; Murari, A.; Harting, D.; Cackett, A.; Hodille, E.

2015-01-01

Recent studies dedicated to the characterisation of in-vessel dust in JET with the new ITER-like wall (ILW) show that dust levels are orders of magnitude lower compared with the latter stages of the carbon-wall (CW) period and are decreasing with operational time. Less than 1 g of dust was recovered in a recent inspection, compared with more than 200 g of material recovered at the end of the JET-CW life. Recent inspection of the ILW shows low rates of re-deposition with only small areas of damage of a type likely to create particulate matter. Quantifiers from laser scattering techniques also indicate an order of magnitude reduction in dust relative to the JET-CW and show that the amount of dust mobilized after a disruption is proportional to the dynamic vessel forces. It is not possible to infer what fraction of dust (if any) might be created by disruptions. However, disruption mitigation is found to reduce the amount of dust seen after moderate disruptions by a factor of 4. Analysis of the transient impurity events (TIEs) associated with dust show that tungsten dominates. A significant contribution to TIEs is also seen from iron, nickel and chromium (probably from steel and Inconel components). The incidence of severe negative effects on operations from TIEs is found to be relatively rare, with <1% of ILW disruptions linked to TIEs. The evolution of the TIE rate closely follows changes in the laser scattering dust quantifiers; both trend downwards in time but peak during periods of higher disruption rate (thought to be primarily driven by the mobilization of existing dust).

An evaluation of students' perceptions of a college-based programme that involves patients, carers and service users in physiotherapy education.

PubMed

Thomson, Di; Hilton, Ros

2012-03-01

There is little evidence of the integration of UK physiotherapy university education into clinical practice, and some students say that they are not adequately prepared for professional life. This was addressed by a college-based programme involving patients, carers and service users as facilitators of learning to enhance the partnership between health professionals and patients. This programme has been running for 2 years, and this paper is an evaluation of the students' perceptions of it, appraising the outcomes of their learning in order to discover the ways in which it can be enhanced, improved or changed. A grounded theory approach utilizing focus groups and semi-structured interviews was conducted. Three focus groups representing the higher educational levels 4-6 in pre-registration physiotherapy were carried out. Following the analysis of the focus groups, seven interviews reflecting the three educational levels were conducted in order to explore in greater depth the findings from the focus groups. The analysis of the focus groups and the subsequent interviews were carried out in accordance with a grounded theory framework. The students perceived the programme as a context in which to think how their learning needs could be met within a 'real' framework but on their own territory. Equally, it created feelings of anxiety at being given such an open forum that created a challenge to their communication skills. Many expressed a wish for a more explicit mentoring-learning environment. They also perceived a tension between the technical-rational demands of academia and social practice and a need to view this as a basis for critical appraisal and self-awareness. This programme appeared to be integral to the students' development as future physiotherapists. Copyright © 2011 John Wiley & Sons, Ltd.

Statistical analysis and ANN modeling for predicting hydrological extremes under climate change scenarios: the example of a small Mediterranean agro-watershed.

PubMed

Kourgialas, Nektarios N; Dokou, Zoi; Karatzas, George P

2015-05-01

The purpose of this study was to create a modeling management tool for the simulation of extreme flow events under current and future climatic conditions. This tool is a combination of different components and can be applied in complex hydrogeological river basins, where frequent flood and drought phenomena occur. The first component is the statistical analysis of the available hydro-meteorological data. Specifically, principal components analysis was performed in order to quantify the importance of the hydro-meteorological parameters that affect the generation of extreme events. The second component is a prediction-forecasting artificial neural network (ANN) model that simulates, accurately and efficiently, river flow on an hourly basis. This model is based on a methodology that attempts to resolve a very difficult problem related to the accurate estimation of extreme flows. For this purpose, the available measurements (5 years of hourly data) were divided in two subsets: one for the dry and one for the wet periods of the hydrological year. This way, two ANNs were created, trained, tested and validated for a complex Mediterranean river basin in Crete, Greece. As part of the second management component a statistical downscaling tool was used for the creation of meteorological data according to the higher and lower emission climate change scenarios A2 and B1. These data are used as input in the ANN for the forecasting of river flow for the next two decades. The final component is the application of a meteorological index on the measured and forecasted precipitation and flow data, in order to assess the severity and duration of extreme events. Copyright © 2015 Elsevier Ltd. All rights reserved.

Envisioning the Educational Possibilities of User-Created Virtual Worlds

ERIC Educational Resources Information Center

Antonacci, David M.; Modaress, Nellie

2008-01-01

Educational games and simulations can engage students in higher-level cognitive thinking, such as interpreting, analyzing, discovering, evaluating, acting, and problem solving. Recent technical advances in multiplayer, user-created virtual worlds have significantly expanded the capabilities of user interaction and development within these…

Promoting Undergraduate Research through Integrative Learning

ERIC Educational Resources Information Center

Lewis, Elise C.

2017-01-01

Educators in higher education often seek innovative pedagogies to include in their classrooms. This article describes an integrative learning experience and details the planning, implementation, considerations, and benefits of creating a major-specific undergraduate research day. The event created an opportunity for students to gain confidence and…

Resonant radiation from oscillating higher order solitons

DOE PAGES

Driben, R.; Yulin, A. V.; Efimov, A.

2015-07-15

We present radiation mechanism exhibited by a higher order soliton. In a course of its evolution the higher-order soliton emits polychromatic radiation resulting in formation of multipeak frequency comb-like spectral band. Moreover, the shape and spectral position of this band can be effectively controlled by the relative strength of the third order dispersion. An analytical description is corroborated by numerical simulations. It is also shown that for longer pulses the described effect persists also under the action of higher order perturbations such as Raman and self-steepening.

Construction of special eye models for investigation of chromatic and higher-order aberrations of eyes.

PubMed

Zhai, Yi; Wang, Yan; Wang, Zhaoqi; Liu, Yongji; Zhang, Lin; He, Yuanqing; Chang, Shengjiang

2014-01-01

An achromatic element eliminating only longitudinal chromatic aberration (LCA) while maintaining transverse chromatic aberration (TCA) is established for the eye model, which involves the angle formed by the visual and optical axis. To investigate the impacts of higher-order aberrations on vision, the actual data of higher-order aberrations of human eyes with three typical levels are introduced into the eye model along visual axis. Moreover, three kinds of individual eye models are established to investigate the impacts of higher-order aberrations, chromatic aberration (LCA+TCA), LCA and TCA on vision under the photopic condition, respectively. Results show that for most human eyes, the impact of chromatic aberration on vision is much stronger than that of higher-order aberrations, and the impact of LCA in chromatic aberration dominates. The impact of TCA is approximately equal to that of normal level higher-order aberrations and it can be ignored when LCA exists.

Neural Classifiers for Learning Higher-Order Correlations

NASA Astrophysics Data System (ADS)

Güler, Marifi

1999-01-01

Studies by various authors suggest that higher-order networks can be more powerful and are biologically more plausible with respect to the more traditional multilayer networks. These architectures make explicit use of nonlinear interactions between input variables in the form of higher-order units or product units. If it is known a priori that the problem to be implemented possesses a given set of invariances like in the translation, rotation, and scale invariant pattern recognition problems, those invariances can be encoded, thus eliminating all higher-order terms which are incompatible with the invariances. In general, however, it is a serious set-back that the complexity of learning increases exponentially with the size of inputs. This paper reviews higher-order networks and introduces an implicit representation in which learning complexity is mainly decided by the number of higher-order terms to be learned and increases only linearly with the input size.

Higher-Order Factors of Personality: Do They Exist?

PubMed Central

Ashton, Michael C.; Lee, Kibeom; Goldberg, Lewis R.; de Vries, Reinout E.

2010-01-01

Scales that measure the Big Five personality factors are often substantially intercorrelated. These correlations are sometimes interpreted as implying the existence of two higher-order factors of personality. We show that correlations between measures of broad personality factors do not necessarily imply the existence of higher-order factors, and might instead be due to variables that represent same-signed blends of orthogonal factors. Therefore, the hypotheses of higher-order factors and blended variables can only be tested with data on lower-level personality variables that define the personality factors. We compared the higher-order factor model and the blended variable model in three participant samples using the Big Five Aspect Scales, and found better fit for the latter model. In other analyses using the HEXACO Personality Inventory, we identified mutually uncorrelated markers of six personality factors. We conclude that correlations between personality factor scales can be explained without postulating any higher-order dimensions of personality. PMID:19458345

Higher-order mode photonic crystal based nanofluidic sensor

NASA Astrophysics Data System (ADS)

Peng, Wang; Chen, Youping; Ai, Wu

2017-01-01

A higher-order photonic crystal (PC) based nanofluidic sensor, which worked at 532 nm, was designed and demonstrated. A systematical and detailed method for sculpturing a PC sensor for a given peak wavelength value (PWV) and specified materials was illuminated. It was the first time that the higher order mode was used to design PC based nanofluidic sensor, and the refractive index (RI) sensitivity of this sensor had been verified with FDTD simulation software from Lumerical. The enhanced electrical field of higher order mode structure was mostly confined in the channel area, where the enhance field is wholly interacting with the analytes in the channels. The comparison of RI sensitivity between fundamental mode and higher order mode shows the RI variation of higher order mode is 124.5 nm/RIU which is much larger than the fundamental mode. The proposed PC based nanofluidic structure pioneering a novel style for future optofluidic design.

Evolution-Inspired Computational Design of Symmetric Proteins.

PubMed

Voet, Arnout R D; Simoncini, David; Tame, Jeremy R H; Zhang, Kam Y J

2017-01-01

Monomeric proteins with a number of identical repeats creating symmetrical structures are potentially very valuable building blocks with a variety of bionanotechnological applications. As such proteins do not occur naturally, the emerging field of computational protein design serves as an excellent tool to create them from nonsymmetrical templates. Existing pseudo-symmetrical proteins are believed to have evolved from oligomeric precursors by duplication and fusion of identical repeats. Here we describe a computational workflow to reverse-engineer this evolutionary process in order to create stable proteins consisting of identical sequence repeats.

Lagrangian-Hamiltonian unified formalism for autonomous higher order dynamical systems

NASA Astrophysics Data System (ADS)

Prieto-Martínez, Pedro Daniel; Román-Roy, Narciso

2011-09-01

The Lagrangian-Hamiltonian unified formalism of Skinner and Rusk was originally stated for autonomous dynamical systems in classical mechanics. It has been generalized for non-autonomous first-order mechanical systems, as well as for first-order and higher order field theories. However, a complete generalization to higher order mechanical systems is yet to be described. In this work, after reviewing the natural geometrical setting and the Lagrangian and Hamiltonian formalisms for higher order autonomous mechanical systems, we develop a complete generalization of the Lagrangian-Hamiltonian unified formalism for these kinds of systems, and we use it to analyze some physical models from this new point of view.

Autism, Context/Noncontext Information Processing, and Atypical Development

PubMed Central

Skoyles, John R.

2011-01-01

Autism has been attributed to a deficit in contextual information processing. Attempts to understand autism in terms of such a defect, however, do not include more recent computational work upon context. This work has identified that context information processing depends upon the extraction and use of the information hidden in higher-order (or indirect) associations. Higher-order associations underlie the cognition of context rather than that of situations. This paper starts by examining the differences between higher-order and first-order (or direct) associations. Higher-order associations link entities not directly (as with first-order ones) but indirectly through all the connections they have via other entities. Extracting this information requires the processing of past episodes as a totality. As a result, this extraction depends upon specialised extraction processes separate from cognition. This information is then consolidated. Due to this difference, the extraction/consolidation of higher-order information can be impaired whilst cognition remains intact. Although not directly impaired, cognition will be indirectly impaired by knock on effects such as cognition compensating for absent higher-order information with information extracted from first-order associations. This paper discusses the implications of this for the inflexible, literal/immediate, and inappropriate information processing of autistic individuals. PMID:22937255

Synergy: Creating a Library Website with Social Interaction and a Collection Focus

ERIC Educational Resources Information Center

Kiyotake, Cynthia

2010-01-01

Since launching its first website in 1997, the Arapahoe Library District (ALD) has constantly looked at ways to review and renew this vital tool for patrons. This article focuses on the process of redesigning the ALD website--the steps taken and decisions made in order to create a site that incorporates interactive elements and patron input and…

Media, Information Technology, and Language Planning: What Can Endangered Language Communities Learn from Created Language Communities?

ERIC Educational Resources Information Center

Schreyer, Christine

2011-01-01

The languages of Klingon and Na'vi, both created for media, are also languages that have garnered much media attention throughout the course of their existence. Speakers of these languages also utilize social media and information technologies, specifically websites, in order to learn the languages and then put them into practice. While teaching a…

Inserting new technology into small missions

NASA Technical Reports Server (NTRS)

Deutsch, L. J.

2001-01-01

Part of what makes small missions small is that they have less money. Executing missions at low cost implies extensive use of cost sharing with other missions or use of existing solutions. However, in order to create many small missions, new technology must be developed, applied, and assimilated. Luckily, there are methods for creating new technology and inserting it into faster-better-cheaper (FBC) missions.

Word, Words, Words: Ellul and the Mediocritization of Language

ERIC Educational Resources Information Center

Foltz, Franz; Foltz, Frederick

2012-01-01

The authors explore how technique via propaganda has replaced the word with images creating a mass society and limiting the ability of people to act as individuals. They begin by looking at how words affect human society and how they have changed over time. They explore how technology has altered the meaning of words in order to create a more…

Grand Challenges in Clinical Decision Support v10

PubMed Central

Sittig, Dean F.; Wright, Adam; Osheroff, Jerome A.; Middleton, Blackford; Teich, Jonathan M.; Ash, Joan S.; Campbell, Emily; Bates, David W.

2008-01-01

There is a pressing need for high-quality, effective means of designing, developing, presenting, implementing, evaluating, and maintaining all types of clinical decision support capabilities for clinicians, patients and consumers. Using an iterative, consensus-building process we identified a rank-ordered list of the top 10 grand challenges in clinical decision support. This list was created to educate and inspire researchers, developers, funders, and policy-makers. The list of challenges in order of importance that they be solved if patients and organizations are to begin realizing the fullest benefits possible of these systems consists of: Improve the human-computer interface; Disseminate best practices in CDS design, development, and implementation; Summarize patient-level information; Prioritize and filter recommendations to the user; Create an architecture for sharing executable CDS modules and services; Combine recommendations for patients with co-morbidities; Prioritize CDS content development and implementation; Create internet-accessible clinical decision support repositories; Use freetext information to drive clinical decision support; Mine large clinical databases to create new CDS. Identification of solutions to these challenges is critical if clinical decision support is to achieve its potential and improve the quality, safety and efficiency of healthcare. PMID:18029232

Environmental Control and Life Support Integration Strategy for 6-Crew Operations

NASA Technical Reports Server (NTRS)

2009-01-01

The International Space Station (ISS) crew compliment will be increasing in size from 3 to 6 crew members in the summer of 2009. In order to support this increase in crew on ISS, the United States on-orbit Segment (USOS) has been outfitted with a suite of regenerative Environmental Control and Life Support (ECLS) hardware including an Oxygen Generation System(OGS), Waste and Hygiene Compartment (WHC), and a Water Recovery System (WRS). The WRS includes the Urine Processor Assembly (UPA) and the Water Processor Assembly (WPA). A critical step in advancing to a 6Crew support capability on ISS is a full checkedout and verification of the Regenerative ECLS hardware. With a successful checkout, the ISS will achieve full redundancy in its onorbit life support system between the USOS and Russian Segment (RS). The additional redundancy created by the Regenerative ECLS hardware creates the opportunity for independent support capabilities between segments, and for the first time since the start of ISS, the necessity to revise Life Support strategy agreements. Independent operating strategies coupled with the loss of the Space Shuttle supply and return capabilities in 2010 offers additional challenges. These challenges create the need for a higher level of onorbit consumables reserve to ensure crewmember life support during a system failure. This paper will discuss the evolution of the ISS Life Support hardware strategy in support of 6Crew on ISS, as well as the continued work which will be necessary to ensure the support of crew and ISS Program objectives through the life of station.

Digitally Controlled Four Harmonic Buncher for FSU LINAC

NASA Astrophysics Data System (ADS)

Moerland, Daniel S.; Wiedenhoever, Ingo; Baby, Lagy T.; Caussyn, David; Spingler, David

2012-03-01

Florida State University's John D. Fox Superconducting Accelerator Laboratory is operating a Tandem-Linac system for heavy ion beams at energies of 5-10 MeV/u. Recently, the accelerator has been used as the driver for the radioactive beam facility RESOLUT, which poses new demands on its high-intensity performance and time-resolution. These demands motivated us to optimize the RF bunching system and to switch the bunch frequency from 48.5 to 12.125 MHz. We installed a four-harmonic resonant transformer to create 3-4 kV potential oscillations across a pair of wire-mesh grids. This setup is modulating the energy of the beam injected into the tandem accelerator, with the aim to create short bunches of beam particles. Asawtooth-like wave-form is created using the Fourier series method, by combining the basis sinusoidal wave of 12.125MHz and its 3 higher order harmonics, in a manner similar to the systems used at ATLAS [1] and other RF-accelerators. A new aspect of our setup is the use of a digital 1GHz function generator, which allows us to optimize and stabilize the synthesized waveform. The control system was realized using labview and integrated into the recently updated controls of the accelerator. We characterize the bunching quality achievedand discuss the optimization of the bunching wave-form. The bunching system has been successfully used in a number of Linac-experiments performed during 2011.[4pt][1] S. Sharamentov, J. Bogaty, B.E. Clifft, R. Pardo, UPGRADE OF THE ATLAS POSITIVE ION INJECTOR BUNCHING SYSTEM, Proceedings of 2005 Particle Accelerator Conference, Knoxville, Tennessee

Conductive paint-filled cement paste sensor for accelerated percolation

NASA Astrophysics Data System (ADS)

Laflamme, Simon; Pinto, Irvin; Saleem, Hussam S.; Elkashef, Mohamed; Wang, Kejin; Cochran, Eric

2015-04-01

Cementitious-based strain sensors can be used as robust monitoring systems for civil engineering applications, such as road pavements and historic structures. To enable large-scale deployments, the fillers used in creating a conductive material must be inexpensive and easy to mix homogeneously. Carbon black (CB) particles constitute a promising filler due to their low cost and ease of dispersion. However, a relatively high quantity of these particles needs to be mixed with cement in order to reach the percolation threshold. Such level may influence the physical properties of the cementitious material itself, such as compressive and tensile strengths. In this paper, we investigate the possibility of utilizing a polymer to create conductive chains of CB more quickly than in a cementitious-only medium. This way, while the resulting material would have a higher conductivity, the percolation threshold would be reached with fewer CB particles. Building on the principle that the percolation threshold provides great sensing sensitivity, it would be possible to fabricate sensors using less conducting particles. We present results from a preliminary investigation comparing the utilization of a conductive paint fabricated from a poly-Styrene-co-Ethylene-co-Butylene-co-Styrene (SEBS) polymer matrix and CB, and CB-only as fillers to create cementitious sensors. Preliminary results show that the percolation threshold can be attained with significantly less CB using the SEBS+CB mix. Also, the study of the strain sensing properties indicates that the SEBS+CB sensor has a strain sensitivity comparable to the one of a CB-only cementitious sensor when comparing specimens fabricated at their respective percolation thresholds.

77 FR 69673 - Self-Regulatory Organizations; Chicago Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... Organizations; Chicago Stock Exchange, Inc.; Notice of Filing and Immediate Effectiveness of Proposed Rule... costs and burdens associated with handling and recording orders that were rarely executed. \\5\\ The... actually exacerbated the operational costs which the Exchange sought to avoid by creating the order...

Device and method for creating Gaussian aberration-corrected electron beams

DOEpatents

McMorran, Benjamin; Linck, Martin

2016-01-19

Electron beam phase gratings have phase profiles that produce a diffracted beam having a Gaussian or other selected intensity profile. Phase profiles can also be selected to correct or compensate electron lens aberrations. Typically, a low diffraction order produces a suitable phase profile, and other orders are discarded.

76 FR 70913 - Retrospective Review Under Executive Order 13579

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... tribes, non-governmental organizations, and the general public to evaluate the effectiveness of the... freedom of choice, and ensure scientific integrity during the rulemaking process in order to create a... should be made available to the public by November 8, 2011. The Chairman of the Federal Energy Regulatory...

Adaptations to a Learning Resource

ERIC Educational Resources Information Center

Libbrecht, Paul

2015-01-01

Learning resources have been created to represent digital units of exchangeable materials that teachers and learners can pull from in order to support the learning processes. They resource themselves. Leveraging the web, one can often find these resources. But what characteristics do they need in order to be easily exchangeable? Although several…

Office of Research and Development Program Guide, Fiscal Year 1976.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Research and Development.

The United States Environmental Protection Agency was created by Presidential order in December of 1970. This order brought together 15 programs scattered among several Federal Government agencies to mount a coordinated attack on environmental problems. These problems include air and water pollution, solid waste management, pesticides, radiation,…

76 FR 24513 - Public Land Order No. 7765; Partial Revocation Jupiter Inlet Lighthouse Withdrawal; Florida

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

...] Public Land Order No. 7765; Partial Revocation Jupiter Inlet Lighthouse Withdrawal; Florida AGENCY... as part of the Jupiter Inlet Lighthouse Outstanding Natural Area. DATES: Effective Date: May 2, 2011... U.S.C. 1787), which created the Jupiter Inlet Lighthouse Outstanding Natural Area, and which...

A Second Home: Indigenous Considerations for Campus Housing

ERIC Educational Resources Information Center

Singson, Jamie M.; Tachine, Amanda R.; Davidson, Charlotte E.; Waterman, Stephanie J.

2016-01-01

The experiences of Native Students in campus housing has had limited attention in scholarship, which restricts cultural understanding and opportunities to create inclusive living environments. College and university housing is well positioned to create a positive living environment for students. We raise concerns on how higher education…

Coherent manipulation of non-thermal spin order in optical nuclear polarization experiments

NASA Astrophysics Data System (ADS)

Buntkowsky, Gerd; Ivanov, Konstantin L.; Zimmermann, Herbert; Vieth, Hans-Martin

2017-03-01

Time resolved measurements of Optical Nuclear Polarization (ONP) have been performed on hyperpolarized triplet states in molecular crystals created by light excitation. Transfer of the initial electron polarization to nuclear spins has been studied in the presence of radiofrequency excitation; the experiments have been performed with different pulse sequences using different doped molecular systems. The experimental results clearly demonstrate the dominant role of coherent mechanisms of spin order transfer, which manifest themselves in well pronounced oscillations. These oscillations are of two types, precessions and nutations, having characteristic frequencies, which are the same for the different molecular systems and the pulse sequences applied. Hence, precessions and nutations constitute a general feature of polarization transfer in ONP experiments. In general, coherent manipulation of spin order transfer creates a powerful resource for improving the performance of the ONP method, which paves the way to strong signal enhancement in nuclear magnetic resonance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; MacDonald, Jason; Goldman, Charles

This study provides an examination of various market and policy barriers to demand response providing ancillary services in both ISO/RTO and non-ISO/RTO regions, especially at the program provider level. It is useful to classify barriers in order to create a holistic understanding and identify parties that could be responsible for their removal. This study develops a typology of barriers focusing on smaller customers that must rely on a program provider (i.e., electric investor owned utility or IOU, ARC) to create an aggregated DR resource in order to bring ancillary services to the balancing authority. The barriers were identified through examinationsmore » of regulatory structures, market environments, and product offerings; and discussions with industry stakeholders and regulators. In order to help illustrate the differences in barriers among various wholesale market designs and their constituent retail environments, four regions were chosen to use as case studies: Colorado, Texas, Wisconsin, and New Jersey.« less

Comparison of allele-specific PCR, created restriction-site PCR, and PCR with primer-introduced restriction analysis methods used for screening complex vertebral malformation carriers in Holstein cattle

PubMed Central

Altınel, Ahmet

2017-01-01

Complex vertebral malformation (CVM) is an inherited, autosomal recessive disorder of Holstein cattle. The aim of this study was to compare sensitivity, specificity, positive and negative predictive values, accuracy, and rapidity of allele-specific polymerase chain reaction (AS-PCR), created restriction-site PCR (CRS-PCR), and PCR with primer-introduced restriction analysis (PCR-PIRA), three methods used in identification of CVM carriers in a Holstein cattle population. In order to screen for the G>T mutation in the solute carrier family 35 member A3 (SLC35A3) gene, DNA sequencing as the gold standard method was used. The prevalence of carriers and the mutant allele frequency were 3.2% and 0.016, respectively, among Holstein cattle in the Thrace region of Turkey. Among the three methods, the fastest but least accurate was AS-PCR. Although the rapidity of CRS-PCR and PCR-PIRA were nearly equal, the accuracy of PCR-PIRA was higher than that of CRS-PCR. Therefore, among the three methods, PCR-PIRA appears to be the most efficacious for screening of mutant alleles when identifying CVM carriers in a Holstein cattle population. PMID:28927256

Translation initiation events on structured eukaryotic mRNAs generate gene expression noise

PubMed Central

Dacheux, Estelle; Malys, Naglis; Meng, Xiang; Ramachandran, Vinoy; Mendes, Pedro

2017-01-01

Abstract Gene expression stochasticity plays a major role in biology, creating non-genetic cellular individuality and influencing multiple processes, including differentiation and stress responses. We have addressed the lack of knowledge about posttranscriptional contributions to noise by determining cell-to-cell variations in the abundance of mRNA and reporter protein in yeast. Two types of structural element, a stem–loop and a poly(G) motif, not only inhibit translation initiation when inserted into an mRNA 5΄ untranslated region, but also generate noise. The noise-enhancing effect of the stem–loop structure also remains operational when combined with an upstream open reading frame. This has broad significance, since these elements are known to modulate the expression of a diversity of eukaryotic genes. Our findings suggest a mechanism for posttranscriptional noise generation that will contribute to understanding of the generally poor correlation between protein-level stochasticity and transcriptional bursting. We propose that posttranscriptional stochasticity can be linked to cycles of folding/unfolding of a stem–loop structure, or to interconversion between higher-order structural conformations of a G-rich motif, and have created a correspondingly configured computational model that generates fits to the experimental data. Stochastic events occurring during the ribosomal scanning process can therefore feature alongside transcriptional bursting as a source of noise. PMID:28521011

Practical implications of pre-employment nurse assessments.

PubMed

Kuthy, James E; Ramon, Cheree; Gonzalez, Ronald; Biddle, Dan A

2013-01-01

Hiring nurses is a difficult task that can have serious repercussions for medical facilities. If nurses without proper skills are hired, patients can suffer from insufficient quality of care and potentially life-threatening conditions. Nurse applicants' technical knowledge is extremely important to avoid negative outcomes; however, there are soft skills that factor into their success, such as bedside manner, personality, communication, and decision making. In order for medical facilities to select and maintain high-performing nurse staff, hiring managers must incorporate evaluations for these types of skills in their hiring process. The current study focused on using content/criterion-related validation design to create assessments by which nurse applicants can be evaluated for both technical knowledge/skills and soft skills. The study included participation of more than 876 nursing staff members. To rank applicants on divergent skills, 3 assessment types were investigated, resulting in the creation of an assessment with 3 components. The clinical, situational, and behavioral components that were created measure applicants' job knowledge, interpersonal competency in medical facility-related situations, and aspects of personality and behavior, respectively. Results indicate that using the assessment can predict 45% of a nurse applicant's future job performance. Practical implications include hiring and maintaining a higher quality of nurses and decreased hiring costs.

Competency-based reforms of the undergraduate biology curriculum: integrating the physical and biological sciences.

PubMed

Thompson, Katerina V; Chmielewski, Jean; Gaines, Michael S; Hrycyna, Christine A; LaCourse, William R

2013-06-01

The National Experiment in Undergraduate Science Education project funded by the Howard Hughes Medical Institute is a direct response to the Scientific Foundations for Future Physicians report, which urged a shift in premedical student preparation from a narrow list of specific course work to a more flexible curriculum that helps students develop broad scientific competencies. A consortium of four universities is working to create, pilot, and assess modular, competency-based curricular units that require students to use higher-order cognitive skills and reason across traditional disciplinary boundaries. Purdue University; the University of Maryland, Baltimore County; and the University of Miami are each developing modules and case studies that integrate the biological, chemical, physical, and mathematical sciences. The University of Maryland, College Park, is leading the effort to create an introductory physics for life sciences course that is reformed in both content and pedagogy. This course has prerequisites of biology, chemistry, and calculus, allowing students to apply strategies from the physical sciences to solving authentic biological problems. A comprehensive assessment plan is examining students' conceptual knowledge of physics, their attitudes toward interdisciplinary approaches, and the development of specific scientific competencies. Teaching modules developed during this initial phase will be tested on multiple partner campuses in preparation for eventual broad dissemination.

Higher and Lower Order Factor Analyses of the Temperament in Middle Childhood Questionnaire.

PubMed

Kotelnikova, Yuliya; Olino, Thomas M; Klein, Daniel N; Mackrell, Sarah V M; Hayden, Elizabeth P

2017-12-01

The Temperament in Middle Childhood Questionnaire (TMCQ) is a widely used parent-report measure of temperament. However, neither its lower nor higher order structures has been tested via a bottom-up, empirically based approach. We conducted higher and lower order exploratory factor analyses (EFAs) of the TMCQ in a large ( N = 654) sample of 9-year-olds. Item-level EFAs identified 92 items as suitable (i.e., with loadings ≥.40) for constructing lower order factors, only half of which resembled a TMCQ scale posited by the measure's authors. Higher order EFAs of the lower order factors showed that a three-factor structure (Impulsivity/Negative Affectivity, Negative Affectivity, and Openness/Assertiveness) was the only admissible solution. Overall, many TMCQ items did not load well onto a lower order factor. In addition, only three factors, which did not show a clear resemblance to Rothbart's four-factor model of temperament in middle childhood, were needed to account for the higher order structure of the TMCQ.

Higher- and Lower-Order Factor Analyses of the Temperament in Middle Childhood Questionnaire

PubMed Central

Kotelnikova, Yuliya; Olino, Thomas M.; Klein, Daniel N.; Mackrell, Sarah V.M.; Hayden, Elizabeth P.

2017-01-01

The Temperament in Middle Childhood Questionnaire (TMCQ; Simonds & Rothbart, 2004) is a widely used parent-report measure of temperament. However, neither its lower- nor higher-order structures have been tested via a bottom-up, empirically based approach. We conducted higher- and lower-order exploratory factor analyses (EFAs) of the TMCQ in a large (N = 654) sample of 9-year-olds. Item-level EFAs identified 92 items as suitable (i.e., with loadings ≥.40) for constructing lower-order factors, only half of which resembled a TMCQ scale posited by the measure’s authors. Higher-order EFAs of the lower-order factors showed that a three-factor structure (Impulsivity/Negative Affectivity, Negative Affectivity, and Openness/Assertiveness) was the only admissible solution. Overall, many TMCQ items did not load well onto a lower-order factor. In addition, only three factors, which did not show a clear resemblance to Rothbart’s four-factor model of temperament in middle childhood, were needed to account for the higher-order structure of the TMCQ. PMID:27002124

Nekton assemblage structure in natural and created marsh-edge habitats of the Guadalupe Estuary, Texas, USA

NASA Astrophysics Data System (ADS)

Zeug, Steven C.; Shervette, Virginia R.; Hoeinghaus, David J.; Davis, Stephen E., III

2007-02-01

Natural and created Spartina brackish marsh habitats in the Guadalupe Estuary, adjacent to the Aransas National Wildlife Refuge, Texas, USA were surveyed during spring, summer, and fall 2004 to evaluate the equivalence of nekton assemblages in an old (>30 years) created marsh. During each season, six replicate samples were collected in each marsh type using a 1-m 2 drop sampler. Multivariate analysis revealed significant differences in nekton assemblage structure among marsh type, both within and across seasons. Species richness was significantly higher in the natural marsh in spring and summer but not in fall. Several species that were dominant in the natural marsh but rare or absent in the created marsh had strong correlations with the presence of oyster substrate that was only encountered in natural marsh samples. Although cumulative richness was greater in the natural marsh, eight species were collected only from the created marsh. Shrimp and fish biomass was significantly higher in natural marsh. Analysis of the density, biomass and size structure of three commercially important crustaceans indicated that the created marsh supported similar biomass of some species (white shrimp, blue crab); however, the size structure of some populations was variable among marshes (blue crab, brown shrimp). We conclude that lower substrate complexity (specifically oyster) and soil organic content in the created marsh reduced measures of nekton similarity and recommend that these features be addressed in future restoration efforts.

Why Your College Can't Avoid Internationalization

ERIC Educational Resources Information Center

Lauer, Larry D.

2012-01-01

Financial trends and technology are changing government policies toward higher education in countries all around the globe. Governments are rethinking economic-development priorities and the role higher education should play in helping meet those priorities. China, for example, is creating new higher education institutions with the goal of…

Widening Participation in Higher Education: A Play in Five Acts

ERIC Educational Resources Information Center

Pitman, Tim

2017-01-01

Policies and programs to address higher education disadvantage reveal four distinct approaches, each revealing certain assumptions about the nature of educational disadvantage. These are: creating mass higher education systems; redistributing or allocating certain places to disadvantaged students; changing the cultural practices of institutions;…

Disability in Higher Education: A Social Justice Approach

ERIC Educational Resources Information Center

Evans, Nancy J.; Broido, Ellen M.; Brown, Kirsten R.; Wilke, Autumn K.

2017-01-01

"Disability in Higher Education: A Social Justice Approach" examines how disability is conceptualized in higher education and ways in which students, faculty, and staff with disabilities are viewed and served on college campuses. Drawing on multiple theoretical frameworks, research, and experience creating inclusive campuses, this text…

A Classification of Institutions of Higher Education. 1987 Edition.

ERIC Educational Resources Information Center

Carnegie Foundation for the Advancement of Teaching, Princeton, NJ.

Statistics classifying American colleges and universities according to their educational functions and missions are included. Rather than creating a hierarchy, this information groups institutions by shared characteristics. Changes in higher education are portrayed, and a continued growth in institutions of higher education is noted. There are…

Proceedings of RIKEN BNL Resarch Center Workshop: Fluctuations, Correlations and RHIC Low Energy Runs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karsch, F.; Kojo, T.; Mukherjee, S.

Most of our visible universe is made up of hadronic matter. Quantum Chromodynamics (QCD) is the theory of strong interaction that describes the hadronic matter. However, QCD predicts that at high enough temperatures and/or densities ordinary hadronic matter ceases to exist and a new form of matter is created, the so-called Quark Gluon Plasma (QGP). Non-perturbative lattice QCD simulations shows that for high temperature and small densities the transition from the hadronic to the QCD matter is not an actual phase transition, rather it takes place via a rapid crossover. On the other hand, it is generally believed that atmore » zero temperature and high densities such a transition is an actual first order phase transition. Thus, in the temperature-density phase diagram of QCD, the first order phase transition line emanating from the zero temperature high density region ends at some higher temperature where the transition becomes a crossover. The point at which the first order transition line turns into a crossover is a second order phase transition point belonging to three dimensional Ising universality class. This point is known as the QCD Critical End Point (CEP). For the last couple of years the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory has been performing experiments at lower energies in search of the elusive QCD CEP. In general critical behaviors are manifested through appearance of long range correlations and increasing fluctuations associated with the presence of mass-less modes in the vicinity of a second order phase transition. Experimental signatures of the CEP are likely to be found in observables related to fluctuations and correlations. Thus, one of the major focuses of the RHIC low energy scan program is to measure various experimental observables connected to fluctuations and correlations. On the other hand, with the start of the RHIC low energy scan program, a flurry of activities are taking place to provide solid theoretical background for the search of the CEP using observables related to fluctuations and correlations. While new data are pouring in from the RHIC low energy scan program, many recent advances have also been made in the phenomenological and lattice gauge theory sides in order to have a better theoretical understanding of the wealth of new data. This workshop tried to create a synergy between the experimental, phenomenological and lattice QCD aspects of the fluctuation and correlation related studies of the RHIC low energy scan program. The workshop brought together all the leading experts from related fields under the same forum to share new ideas among themselves in order to streamline the continuing search of CEP in the RHIC low energy scan program.« less

Internationalisation of Canadian Higher Education: Troubling the Notion of Autonomy through an Examination of Policy Actors, Knowledge and Spaces

ERIC Educational Resources Information Center

Viczko, Melody

2013-01-01

Internationalisation of higher education has been overwhelmingly embraced by Canadian universities (Beck 2009). Yet, the decentralised nature of higher education institutions, coupled with the absence of a national governing body with responsibility for higher education, creates an interesting terrain for internationalisation. In this paper, I…

Faculty Attitudes and Training Needs to Respond to the New European Higher Education Challenges

ERIC Educational Resources Information Center

Diaz, Maria Jose Fernandez; Santaolalla, Rafael Carballo; Gonzalez, Arturo Galan

2010-01-01

The main objective of the Bologna Process is to create a "European space" for higher education that allows for comparability, compatibility, and coherence between the existing systems of higher education across Europe. This objective is commonly known as the European higher education area (EHEA). The creation of the EHEA is a new and…

The Identity of American Catholic Higher Education: A Historical Overview

ERIC Educational Resources Information Center

Garrett, Matthew

2006-01-01

American Catholic higher education has faced and overcome challenges, both from American higher education and Vatican Church officials, in its long and rich history. Georgetown College's founding in 1789 was the first of several Catholic higher education institutions created in the late 18th and early 19th centuries. The 20th century brought the…

T-Check in Technologies for Interoperability: Business Process Management in a Web Services Context

DTIC Science & Technology

2008-09-01

UML Sequence Diagram) 6  Figure 3:   BPMN Diagram of the Order Processing Business Process 9  Figure 4:   T-Check Process for Technology Evaluation 10...Figure 5:  Notional System Architecture 12  Figure 6:  Flow Chart of the Order Processing Business Process 14  Figure 7:  Order Processing Activities...features. Figure 3 (created with Intalio BPMS Designer [Intalio 2008]) shows a BPMN view of the Order Processing business process that is used in the

Higher-order nonclassicalities of finite dimensional coherent states: A comparative study

NASA Astrophysics Data System (ADS)

Alam, Nasir; Verma, Amit; Pathak, Anirban

2018-07-01

Conventional coherent states (CSs) are defined in various ways. For example, CS is defined as an infinite Poissonian expansion in Fock states, as displaced vacuum state, or as an eigenket of annihilation operator. In the infinite dimensional Hilbert space, these definitions are equivalent. However, these definitions are not equivalent for the finite dimensional systems. In this work, we present a comparative description of the lower- and higher-order nonclassical properties of the finite dimensional CSs which are also referred to as qudit CSs (QCSs). For the comparison, nonclassical properties of two types of QCSs are used: (i) nonlinear QCS produced by applying a truncated displacement operator on the vacuum and (ii) linear QCS produced by the Poissonian expansion in Fock states of the CS truncated at (d - 1)-photon Fock state. The comparison is performed using a set of nonclassicality witnesses (e.g., higher order antibunching, higher order sub-Poissonian statistics, higher order squeezing, Agarwal-Tara parameter, Klyshko's criterion) and a set of quantitative measures of nonclassicality (e.g., negativity potential, concurrence potential and anticlassicality). The higher order nonclassicality witnesses have found to reveal the existence of higher order nonclassical properties of QCS for the first time.

Data Stewardship and Long-Term Archive of ICESat Data at the National Snow and Ice Data Center (NSIDC)

NASA Astrophysics Data System (ADS)

Fowler, D. K.; Moses, J. F.; Duerr, R. E.; Webster, D.; Korn, D.

2010-12-01

Data Stewardship is becoming a principal part of a data manager’s work at NSIDC. It is vitally important that our organization makes a commitment to both current and long-term goals of data management and the preservation of our scientific data. Data must be available to researchers not only during active missions, but long after missions end. This includes maintaining accurate documentation, data tools, and a knowledgeable user support staff. NSIDC is preparing for long-term support of the ICESat mission data. Though ICESat has seen its last operational day, the data is still being improved and NSIDC is scheduled to archive the final release, Release 33, starting late in 2010. This release will include the final adjustments to the processing algorithms and will produce the best possible products to date. Along with the higher-level data sets, all supporting documentation will be archived at NSIDC. For the long-term archive, it is imperative that there is sufficient information about how products were prepared in order to convince future researchers that the scientific results are reproducible. The processing algorithms along with the Level 0 and ancillary products used to create the higher-level products will be archived and made available to users. This can enable users to examine production history, to derive revised products and to create their own products. Also contained in the long-term archive will be pre-launch, calibration/validation, and test data. These data are an important part of the provenance which must be preserved. For longevity, we’ll need to archive the data and documentation in formats that will be supported in the years to come.

Discrimination of different sub-basins on Tajo River based on water influence factor

NASA Astrophysics Data System (ADS)

Bermudez, R.; Gascó, J. M.; Tarquis, A. M.; Saa-Requejo, A.

2009-04-01

Numeric taxonomy has been applied to classify Tajo basin water (Spain) till Portugal border. Several stations, a total of 52, that estimate 15 water variables have been used in this study. The different groups have been obtained applying a Euclidean distance among stations (distance classification) and a Euclidean distance between each station and the centroid estimated among them (centroid classification), varying the number of parameters and with or without variable typification. In order to compare the classification a log-log relation has been established, between number of groups created and distances, to select the best one. It has been observed that centroid classification is more appropriate following in a more logic way the natural constrictions than the minimum distance among stations. Variable typification doesn't improve the classification except when the centroid method is applied. Taking in consideration the ions and the sum of them as variables, the classification improved. Stations are grouped based on electric conductivity (CE), total anions (TA), total cations (TC) and ions ratio (Na/Ca and Mg/Ca). For a given classification and comparing the different groups created a certain variation in ions concentration and ions ratio are observed. However, the variation in each ion among groups is different depending on the case. For the last group, regardless the classification, the increase in all ions is general. Comparing the dendrograms, and groups that originated, Tajo river basin can be sub dived in five sub-basins differentiated by the main influence on water: 1. With a higher ombrogenic influence (rain fed). 2. With ombrogenic and pedogenic influence (rain and groundwater fed). 3. With pedogenic influence. 4. With lithogenic influence (geological bedrock). 5. With a higher ombrogenic and lithogenic influence added.

Landfill taxes and Enhanced Waste Management: Combining valuable practices with respect to future waste streams.

PubMed

Hoogmartens, Rob; Eyckmans, Johan; Van Passel, Steven

2016-09-01

Both landfill taxes and Enhanced Waste Management (EWM) practices can mitigate the scarcity issue of landfill capacity by respectively reducing landfilled waste volumes and valorising future waste streams. However, high landfill taxes might erode incentives for EWM, even though EWM creates value by valorising waste. Concentrating on Flanders (Belgium), the paper applies dynamic optimisation modelling techniques to analyse how landfill taxation and EWM can reinforce each other and how taxation schemes can be adjusted in order to foster sustainable and welfare maximising ways of processing future waste streams. Based on the Flemish simulation results, insights are offered that are generally applicable in international waste and resource management policy. As shown, the optimal Flemish landfill tax that optimises welfare in the no EWM scenario is higher than the one in the EWM scenario (93 against €50/ton). This difference should create incentives for applying EWM and is driven by the positive external effects that are generated by EWM practices. In Flanders, as the current landfill tax is slightly lower than these optimal levels, the choice that can be made is to further increase taxation levels or show complete commitment to EWM. A first generally applicable insight that was found points to the fact that it is not necessarily the case that the higher the landfill tax, the more effective waste management improvements can be realised. Other insights are about providing sufficient incentives for applying EMW practices and formulating appropriate pleas in support of technological development. By these insights, this paper should provide relevant information that can assist in triggering the transition towards a resource-efficient, circular economy in Europe. Copyright © 2016 Elsevier Ltd. All rights reserved.

Forging the Ties That Bind: The Dilemma of the Modern University.

ERIC Educational Resources Information Center

Astin, Alexander W.

1993-01-01

Although diversity of college students may be desirable, the mix of widely differing characteristics, needs, and attendance patterns makes it very difficult to create community and strong peer group relations. When colleges create conditions for strong student bonds and involvement, they may contribute to higher retention. (MSE)

Promoters of Plan to Create a National "Data Highway" Turn to "Thorny" Policy Issues and Legal Questions.

ERIC Educational Resources Information Center

DeLoughry, Thomas J.

1993-01-01

Officials from higher education, government, and industry are examining ways to create and maintain a nationwide computerized information network. Issues include the choice of technology, locus of responsibility, financial support, copyrights, and making the system useful for the majority of individuals. (MSE)

Shortcomings with Tree-Structured Edge Encodings for Neural Networks

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.

2004-01-01

In evolutionary algorithms a common method for encoding neural networks is to use a tree structured assembly procedure for constructing them. Since node operators have difficulties in specifying edge weights and these operators are execution-order dependent, an alternative is to use edge operators. Here we identify three problems with edge operators: in the initialization phase most randomly created genotypes produce an incorrect number of inputs and outputs; variation operators can easily change the number of input/output (I/O) units; and units have a connectivity bias based on their order of creation. Instead of creating I/O nodes as part of the construction process we propose using parameterized operators to connect to preexisting I/O units. Results from experiments show that these parameterized operators greatly improve the probability of creating and maintaining networks with the correct number of I/O units, remove the connectivity bias with I/O units and produce better controllers for a goal-scoring task.

Acoustic wayfinding: A method to measure the acoustic contrast of different paving materials for blind people.

PubMed

Secchi, Simone; Lauria, Antonio; Cellai, Gianfranco

2017-01-01

Acoustic wayfinding involves using a variety of auditory cues to create a mental map of the surrounding environment. For blind people, these auditory cues become the primary substitute for visual information in order to understand the features of the spatial context and orient themselves. This can include creating sound waves, such as tapping a cane. This paper reports the results of a research about the "acoustic contrast" parameter between paving materials functioning as a cue and the surrounding or adjacent surface functioning as a background. A number of different materials was selected in order to create a test path and a procedure was defined for the verification of the ability of blind people to distinguish different acoustic contrasts. A method is proposed for measuring acoustic contrast generated by the impact of a cane tip on the ground to provide blind people with environmental information on spatial orientation and wayfinding in urban places. Copyright © 2016 Elsevier Ltd. All rights reserved.

Creating a Regional Healthcare Network: People First.

PubMed

Michel-Verkerke, Margreet B

2016-01-01

Care organizations in the Dutch region Apeldoorn want to collaborate more in order to improve the care provision to elderly and psychiatric patients living independently. In order to support the collaboration they intend to create a regional digital healthcare network. The research was focused on the relevance of a regional healthcare network for care providers. Eleven semi-structured interviews based on the USE IT-model, were conducted with care providers and staff members. Results show that care providers need to tune their activities for this target group and create an agreement on integrated care. The relevance of a digital communication and collaboration platform is high. The regional healthcare network should support the collaboration between care providers by: 1. Offering a communication platform to replace the time consuming communication by telephone; 2. Making patient information available for patient and care provider at patients' homes; 3. Giving insight in who is giving what care to whom; and 4. Giving access to knowledge about the target group: elderly and psychiatric patients living independently.

A dual-slot microwave antenna for more spherical ablation zones: ex vivo and in vivo validation.

PubMed

Chiang, Jason; Hynes, Kieran A; Bedoya, Mariajose; Brace, Christopher L

2013-08-01

To compare the performance of a microwave antenna design with two annular slots to that of a monopole antenna design in creating a more spherical ablation zone. Animal care and use committee approval was obtained before in vivo experiments were performed. Microwave ablation zones were created by using dual-slot and monopole control antennas for 2, 5, and 10 minutes at 50 and 100 W in ex vivo bovine livers. Dual-slot and monopole antennas were then used to create ablation zones at 100 W for 5 minutes in in vivo porcine livers, which also underwent intraprocedural imaging. Ablation diameter, length, and aspect ratio (diameter ÷ length) were measured at gross pathologic examination and compared at each combination of power and time by using the paired Student t test. A P value less than .05 was considered to indicate a significant difference. Aspect ratios closer to 1 reflected a more spherical ablation zone. The dual-slot antenna created ablation zones with a higher aspect ratio at 50 W for 2 minutes (0.75 vs 0.53, P = .003) and 5 minutes (0.82 vs 0.63, P = .053) than did the monopole antenna in ex vivo liver tissue, although the difference was only significant at 2 minutes. At 100 W, the dual-slot antenna had a significantly higher aspect ratio at 2 minutes (0.52 vs 0.42, P = .002). In vivo studies showed significantly higher aspect ratios at 100 W for 5 minutes (0.63 vs 0.53, respectively, P = .029). Intraprocedural imaging confirmed this characterization, showing higher rates of ablation zone growth and heating primarily at the early stages of the ablation procedure when the dual-slot antenna was used. The dual-slot microwave antenna created a more spherical ablation zone than did the monopole antenna both in vivo and ex vivo liver tissue. Greater control over power delivery can potentially extend the advantages of the dual-slot antenna design to higher power and longer treatment times.

Update of the DTM thermosphere model in the framework of the H2020 project `SWAMI'

NASA Astrophysics Data System (ADS)

Bruinsma, S.; Jackson, D.; Stolle, C.; Negrin, S.

2017-12-01

In the framework of the H2020 project SWAMI (Space Weather Atmosphere Model and Indices), which is expected to start in January 2018, the CIRA thermosphere specification model DTM2013 will be improved through the combination of assimilating more density data to drive down remaining biases and a new high cadence kp geomagnetic index in order to improve storm-time performance. Five more years of GRACE high-resolution densities from 2012-2016, densities from the last year of the GOCE mission, Swarm mean densities, and mean densities from 2010-2017 inferred from the geodetic satellites at about 800 km are available now. The DTM2013 model will be compared with the new density data in order to detect possible systematic errors or other kinds of deficiencies and a first analysis will be presented. Also, a more detailed analysis of model performance under storm conditions will be provided, which will then be the benchmark to quantify model improvement expected with the higher cadence kp indices. In the SWAMI project, the DTM model will be coupled in the 120-160 km altitude region to the Met Office Unified Model in order to create a whole atmosphere model. It can be used for launch operations, re-entry computations, orbit prediction, and aeronomy and space weather studies. The project objectives and time line will be given.

Music viewed by its entropy content: A novel window for comparative analysis

PubMed Central

Febres, Gerardo; Jaffe, Klaus

2017-01-01

Polyphonic music files were analyzed using the set of symbols that produced the Minimal Entropy Description, which we call the Fundamental Scale. This allowed us to create a novel space to represent music pieces by developing: (a) a method to adjust a textual description from its original scale of observation to an arbitrarily selected scale, (b) a method to model the structure of any textual description based on the shape of the symbol frequency profiles, and (c) the concept of higher order entropy as the entropy associated with the deviations of a frequency-ranked symbol profile from a perfect Zipfian profile. We call this diversity index the ‘2nd Order Entropy’. Applying these methods to a variety of musical pieces showed how the space of ‘symbolic specific diversity-entropy’ and that of ‘2nd order entropy’ captures characteristics that are unique to each music type, style, composer and genre. Some clustering of these properties around each musical category is shown. These methods allow us to visualize a historic trajectory of academic music across this space, from medieval to contemporary academic music. We show that the description of musical structures using entropy, symbol frequency profiles and specific symbolic diversity allows us to characterize traditional and popular expressions of music. These classification techniques promise to be useful in other disciplines for pattern recognition and machine learning. PMID:29040288

Salamander occupancy in headwater stream networks

USGS Publications Warehouse

Grant, E.H.C.; Green, L.E.; Lowe, W.H.

2009-01-01

1. Stream ecosystems exhibit a highly consistent dendritic geometry in which linear habitat units intersect to create a hierarchical network of connected branches. 2. Ecological and life history traits of species living in streams, such as the potential for overland movement, may interact with this architecture to shape patterns of occupancy and response to disturbance. Specifically, large-scale habitat alteration that fragments stream networks and reduces connectivity may reduce the probability a stream is occupied by sensitive species, such as stream salamanders. 3. We collected habitat occupancy data on four species of stream salamanders in first-order (i.e. headwater) streams in undeveloped and urbanised regions of the eastern U.S.A. We then used an information-theoretic approach to test alternative models of salamander occupancy based on a priori predictions of the effects of network configuration, region and salamander life history. 4. Across all four species, we found that streams connected to other first-order streams had higher occupancy than those flowing directly into larger streams and rivers. For three of the four species, occupancy was lower in the urbanised region than in the undeveloped region. 5. These results demonstrate that the spatial configuration of stream networks within protected areas affects the occurrences of stream salamander species. We strongly encourage preservation of network connections between first-order streams in conservation planning and management decisions that may affect stream species.

[Hypophysis-adrenal and thyroid secretion at law order staff depending on professional loading].

PubMed

Koubassov, R V; Barachevsky, Yu E; Ivanov, A M

2015-01-01

A current etiological and pathogenic opinion about human health disturbance thereupon extreme factor effects is shown that this cause is principal mechanism of regulatory system (neuroimmunoendocrine complex) distress. In endocrine link occurs hormonal disbalance in hypothalamus-hypophysis axis, physiological interrelation disturbances in central-peripheral gland system (hypophysis-adrenal, hypophysis-thyroid) and metabolism abnormalities subsequently. Our aim was to determine the particular content of adrenocorticotropic and thyrothrophin hormone, cortisol, thyroxin and triiodthyronine features at law order staff in dependence from professional loading. It's provided two investigation series among law order staff groups--combatants, ordinary policemen and military school students. The investigation period for all people corresponds to combat mission beginning and its finish. In blood serum an adrenocorticotropic (ACTH) and thyrothrophin (TSH) hormone, cortisol, thyroxin (T) and triiodthyronine (T) levels were determined. A higher ACTH and TSH levels detected at combatants in both investigation series. A cortisol, T4 and T3 at combatants before military mission were least in comparative with other groups, but after mission it indexes were largest. Prolonged changes of endocrine secretory function that lead to hormonal disbalance can result to adaptation derangement. In connection with it in medical providing system for person that undergo extreme negative professional factors it's necessary create a special endocrine link with the view of organism resistance and life viability to extreme emergency factors and for prevention of pathological conditions.

Music viewed by its entropy content: A novel window for comparative analysis.

PubMed

Febres, Gerardo; Jaffe, Klaus

2017-01-01

Polyphonic music files were analyzed using the set of symbols that produced the Minimal Entropy Description, which we call the Fundamental Scale. This allowed us to create a novel space to represent music pieces by developing: (a) a method to adjust a textual description from its original scale of observation to an arbitrarily selected scale, (b) a method to model the structure of any textual description based on the shape of the symbol frequency profiles, and (c) the concept of higher order entropy as the entropy associated with the deviations of a frequency-ranked symbol profile from a perfect Zipfian profile. We call this diversity index the '2nd Order Entropy'. Applying these methods to a variety of musical pieces showed how the space of 'symbolic specific diversity-entropy' and that of '2nd order entropy' captures characteristics that are unique to each music type, style, composer and genre. Some clustering of these properties around each musical category is shown. These methods allow us to visualize a historic trajectory of academic music across this space, from medieval to contemporary academic music. We show that the description of musical structures using entropy, symbol frequency profiles and specific symbolic diversity allows us to characterize traditional and popular expressions of music. These classification techniques promise to be useful in other disciplines for pattern recognition and machine learning.

Super-nonlinear fluorescence microscopy for high-contrast deep tissue imaging

NASA Astrophysics Data System (ADS)

Wei, Lu; Zhu, Xinxin; Chen, Zhixing; Min, Wei

2014-02-01

Two-photon excited fluorescence microscopy (TPFM) offers the highest penetration depth with subcellular resolution in light microscopy, due to its unique advantage of nonlinear excitation. However, a fundamental imaging-depth limit, accompanied by a vanishing signal-to-background contrast, still exists for TPFM when imaging deep into scattering samples. Formally, the focusing depth, at which the in-focus signal and the out-of-focus background are equal to each other, is defined as the fundamental imaging-depth limit. To go beyond this imaging-depth limit of TPFM, we report a new class of super-nonlinear fluorescence microscopy for high-contrast deep tissue imaging, including multiphoton activation and imaging (MPAI) harnessing novel photo-activatable fluorophores, stimulated emission reduced fluorescence (SERF) microscopy by adding a weak laser beam for stimulated emission, and two-photon induced focal saturation imaging with preferential depletion of ground-state fluorophores at focus. The resulting image contrasts all exhibit a higher-order (third- or fourth- order) nonlinear signal dependence on laser intensity than that in the standard TPFM. Both the physical principles and the imaging demonstrations will be provided for each super-nonlinear microscopy. In all these techniques, the created super-nonlinearity significantly enhances the imaging contrast and concurrently extends the imaging depth-limit of TPFM. Conceptually different from conventional multiphoton processes mediated by virtual states, our strategy constitutes a new class of fluorescence microscopy where high-order nonlinearity is mediated by real population transfer.

Higher-order awareness, misrepresentation and function

PubMed Central

Rosenthal, David

2012-01-01

Conscious mental states are states we are in some way aware of. I compare higher-order theories of consciousness, which explain consciousness by appeal to such higher-order awareness (HOA), and first-order theories, which do not, and I argue that higher-order theories have substantial explanatory advantages. The higher-order nature of our awareness of our conscious states suggests an analogy with the metacognition that figures in the regulation of psychological processes and behaviour. I argue that, although both consciousness and metacognition involve higher-order psychological states, they have little more in common. One thing they do share is the possibility of misrepresentation; just as metacognitive processing can misrepresent one's cognitive states and abilities, so the HOA in virtue of which one's mental states are conscious can, and sometimes does, misdescribe those states. A striking difference between the two, however, has to do with utility for psychological processing. Metacognition has considerable benefit for psychological processing; in contrast, it is unlikely that there is much, if any, utility to mental states' being conscious over and above the utility those states have when they are not conscious. PMID:22492758

Tensor Spectral Clustering for Partitioning Higher-order Network Structures.

PubMed

Benson, Austin R; Gleich, David F; Leskovec, Jure

2015-01-01

Spectral graph theory-based methods represent an important class of tools for studying the structure of networks. Spectral methods are based on a first-order Markov chain derived from a random walk on the graph and thus they cannot take advantage of important higher-order network substructures such as triangles, cycles, and feed-forward loops. Here we propose a Tensor Spectral Clustering (TSC) algorithm that allows for modeling higher-order network structures in a graph partitioning framework. Our TSC algorithm allows the user to specify which higher-order network structures (cycles, feed-forward loops, etc.) should be preserved by the network clustering. Higher-order network structures of interest are represented using a tensor, which we then partition by developing a multilinear spectral method. Our framework can be applied to discovering layered flows in networks as well as graph anomaly detection, which we illustrate on synthetic networks. In directed networks, a higher-order structure of particular interest is the directed 3-cycle, which captures feedback loops in networks. We demonstrate that our TSC algorithm produces large partitions that cut fewer directed 3-cycles than standard spectral clustering algorithms.

Tensor Spectral Clustering for Partitioning Higher-order Network Structures

PubMed Central

Benson, Austin R.; Gleich, David F.; Leskovec, Jure

2016-01-01

Spectral graph theory-based methods represent an important class of tools for studying the structure of networks. Spectral methods are based on a first-order Markov chain derived from a random walk on the graph and thus they cannot take advantage of important higher-order network substructures such as triangles, cycles, and feed-forward loops. Here we propose a Tensor Spectral Clustering (TSC) algorithm that allows for modeling higher-order network structures in a graph partitioning framework. Our TSC algorithm allows the user to specify which higher-order network structures (cycles, feed-forward loops, etc.) should be preserved by the network clustering. Higher-order network structures of interest are represented using a tensor, which we then partition by developing a multilinear spectral method. Our framework can be applied to discovering layered flows in networks as well as graph anomaly detection, which we illustrate on synthetic networks. In directed networks, a higher-order structure of particular interest is the directed 3-cycle, which captures feedback loops in networks. We demonstrate that our TSC algorithm produces large partitions that cut fewer directed 3-cycles than standard spectral clustering algorithms. PMID:27812399