SASS-1--SUBASSEMBLY STRESS SURVEY CODE
DOE Office of Scientific and Technical Information (OSTI.GOV)
Friedrich, C.M.
1960-01-01
SASS-1, an IBM-704 FORTRAN code, calculates pressure, thermal, and combined stresses in a nuclear reactor core subassembly. In addition to cross- section stresses, the code calculates axial shear stresses needed to keep plane cross sections plane under axial variations of temperature. The input and output nomenclature, arrangement, and formats are described. (B.O.G.)
NASA Astrophysics Data System (ADS)
Weng, Jingmeng; Wen, Weidong; Cui, Haitao; Chen, Bo
2018-06-01
A new method to generate the random distribution of fibers in the transverse cross-section of fiber reinforced composites with high fiber volume fraction is presented in this paper. Based on the microscopy observation of the transverse cross-sections of unidirectional composite laminates, hexagon arrangement is set as the initial arrangement status, and the initial velocity of each fiber is arbitrary at an arbitrary direction, the micro-scale representative volume element (RVE) is established by simulating perfectly elastic collision. Combined with the proposed periodic boundary conditions which are suitable for multi-axial loading, the effective elastic properties of composite materials can be predicted. The predicted properties show reasonable agreement with experimental results. By comparing the stress field of RVE with fibers distributed randomly and RVE with fibers distributed periodically, the predicted elastic modulus of RVE with fibers distributed randomly is greater than RVE with fibers distributed periodically.
Radar cross-section reduction based on an iterative fast Fourier transform optimized metasurface
NASA Astrophysics Data System (ADS)
Song, Yi-Chuan; Ding, Jun; Guo, Chen-Jiang; Ren, Yu-Hui; Zhang, Jia-Kai
2016-07-01
A novel polarization insensitive metasurface with over 25 dB monostatic radar cross-section (RCS) reduction is introduced. The proposed metasurface is comprised of carefully arranged unit cells with spatially varied dimension, which enables approximate uniform diffusion of incoming electromagnetic (EM) energy and reduces the threat from bistatic radar system. An iterative fast Fourier transform (FFT) method for conventional antenna array pattern synthesis is innovatively applied to find the best unit cell geometry parameter arrangement. Finally, a metasurface sample is fabricated and tested to validate RCS reduction behavior predicted by full wave simulation software Ansys HFSSTM and marvelous agreement is observed.
O'Neil, Richard W.; Sweatt, William C.
1992-01-01
An optical assembly is disclosed herein along with a method of operation for use in a dye lasing arrangement, for example a dye laser oscillator or a dye amplifier, in which a continuous stream of dye is caused to flow through a given zone in a cooperating dye chamber while the zone is being illuminated by light from a pumping beam which is directed into the given zone. This in turn causes the dye therein to lase and thereby produce a new dye beam in the case of a dye laser oscillator or amplify a dye beam in the case of a dye amplifier. The optical assembly so disclosed is designed to alter the pump beam such that the beam enters the dye chamber with a different cross-sectional configuration, preferably one having a more uniform intensity profile, than its initially produced cross-sectional configuration. To this end, the assembly includes a network of optical components which first act on the beam while the latter retains its initially produced cross-sectional configuration for separating it into a plurality of predetermined segments and then recombines the separated components in a predetermined way which causes the recombined beam to have the different cross-sectional configuration.
NASA Astrophysics Data System (ADS)
Ou, Zhijing; Lin, Jianmao; Chen, Shengfu; Lin, Wen
2017-10-01
A total of 7 experimental tests were conducted to investigate seismic performance of four element variable cross-sectional Concrete Filled Steel Tubular (CFST) laced columns. The experimental parameters are longitudinal slope and arrangement type of lacing tubes. The rules on hysteresis loop, ductility, energy expenditure, and stiffness degradation of specimens are researched. Test results indicate that all specimens have good seismic performance; their hysteresis loops are full without obvious shrinkage. With the increase of longitudinal slope, the horizontal carrying capacity increases, energy dissipation capacity improve, and there is slightly increase in stiffness degradation. The influence of arrangement type of lacing tubes on displacement ductility of specimens is big.
Temperature dependence of the HNO3 UV absorption cross sections
NASA Technical Reports Server (NTRS)
Burkholder, James B.; Talukdar, Ranajit K.; Ravishankara, A. R.; Solomon, Susan
1993-01-01
The temperature dependence of the HNO3 absorption cross sections between 240 and 360 K over the wavelength range 195 to 350 nm has been measured using a diode array spectrometer. Absorption cross sections were determined using both (1) absolute pressure measurements at 298 K and (2) a dual absorption cell arrangement in which the absorption spectrum at various temperatures is measured relative to the room temperature absorption spectrum. The HNO3 absorption spectrum showed a temperature dependence which is weak at short wavelengths but stronger at longer wavelengths which are important for photolysis in the lower stratosphere. The 298 K absorption cross sections were found to be larger than the values currently recommended for atmospheric modeling (DeMore et al., 1992). Our absorption cross section data are critically compared with the previous measurements of both room temperature and temperature-dependent absorption cross sections. Temperature-dependent absorption cross sections of HNO3 are recommended for use in atmospheric modeling. These temperature dependent HNO3 absorption cross sections were used in a two-dimensional dynamical-photochemical model to demonstrate the effects of the revised absorption cross sections on loss rate of HNO3 and the abundance of NO2 in the stratosphere.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Radhakrishnan, Archana, E-mail: anju.archana@gmail.com; Murugesan, Dr V., E-mail: murugesh@serc.iisc.in
The electromagnetic theory of light explains the behavior of light in most of the domains quite accurately. The problem arises when the exact solution of the Maxwell's equation is not present, in case of objects with arbitrary geometry. To find the extinction cross-section and lifetime of the gold nanoparticle, the software FDTD solutions 8.6 by Lumerical is employed. The extinction cross-sections and lifetimes of Gold nanospheres of different sizes and arrangements are studied using pulse lengths of the order of femtoseconds. The decay constant and other properties are compared. Further, the lifetimes are calculated using frequency and time domain calculations.
Social Sciences of Sport: Bibliographies on Educational Topics No. 3.
ERIC Educational Resources Information Center
ERIC Clearinghouse on Teacher Education, Washington, DC.
This publication is one of a series of annotated bibliographies in physical education. There are four sections--sport history, sport psychology, sport sociology, and sport philosophy. Each section consists of a brief introduction, the annotated bibliographic entries arranged alphabetically by author, and a list of cross references for documents…
ERIC Educational Resources Information Center
Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.
This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1976. It is arranged in three parts. (1) Index: In this section, cross references are given for all the listings in parts two and three. References are arranged under the subject headings, which are in alphabetical order. (2)…
Theoretical Calculations of Supersonic Wave Drag at Zero Lift for a Particular Store Arrangement
NASA Technical Reports Server (NTRS)
Margolis, Kenneth; Malvestuto, Frank S , Jr; Maxie, Peter J , Jr
1958-01-01
An analysis, based on the linearized thin-airfoil theory for supersonic speeds, of the wave drag at zero lift has been carried out for a simple two-body arrangement consisting of two wedgelike surfaces, each with a rhombic lateral cross section and emanating from a common apex. Such an arrangement could be used as two stores, either embedded within or mounted below a wing, or as auxiliary bodies wherein the upper halves could be used as stores and the lower halves for bomb or missile purposes. The complete range of supersonic Mach numbers has been considered and it was found that by orienting the axes of the bodies relative to each other a given volume may be redistributed in a manner which enables the wave drag to be reduced within the lower supersonic speed range (where the leading edge is substantially subsonic). At the higher Mach numbers, the wave drag is always increased. If, in addition to a constant volume, a given maximum thickness-chord ratio is imposed, then canting the two surfaces results in higher wave drag at all Mach numbers. For purposes of comparison, analogous drag calculations for the case of two parallel winglike bodies with the same cross-sectional shapes as the canted configuration have been included. Consideration is also given to the favorable (dragwise) interference pressures acting on the blunt bases of both arrangements.
49 CFR 236.765 - Locking, mechanical.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Locking, mechanical. 236.765 Section 236.765 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Locking, mechanical. An arrangement of locking bars, dogs, tappets, cross locking and other apparatus by...
DOE Office of Scientific and Technical Information (OSTI.GOV)
MacGregor, M.H.; Cullen, D.E.; Howerton, R.J.
1976-07-04
The bibliographic citations in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976 are tabulated. The tabulation has three arrangements: alphabetically by author, alphabetically by publication, and numerically by reference number.
Bavinton, Benjamin R; Duncan, Duane; Grierson, Jeffrey; Zablotska, Iryna B; Down, Ian A; Grulich, Andrew E; Prestage, Garrett P
2016-08-01
Estimates of the proportion of HIV infections coming from within regular sexual relationships among gay and bisexual men (GBM) vary widely. Research surveys use various partner type categories, but there is little understanding of how men classify their partners. We conducted an online cross-sectional survey of Australian GBM exploring sexual relationships, including 2057 men reporting on 2566 regular partnerships. Just over half of the partnerships were considered 'relationships', while the remainder were non-romantic 'fuckbuddy'-style arrangements. In multivariable analysis, factors associated with considering the partnership a 'relationship' were: using a 'romantic' descriptor, partnership length, monogamous agreements, any condomless anal sex with each other, love, and commitment. The category of 'regular partner' can mask diverse partnership types, which have different meanings to GBM, associated behaviours, and HIV risks. Certain HIV prevention techniques may be more suited to particular types of partnerships. 'Fuckbuddy' arrangements need to be more explicitly acknowledged in HIV prevention.
NASA Astrophysics Data System (ADS)
Ranković, Miloš Lj.; Maljković, Jelena B.; Tökési, Károly; Marinković, Bratislav P.
2018-02-01
Measurements and calculations for electron elastic differential cross sections (DCS) of argon atom in the energy range from 40 to 300 eV are presented. DCS have been measured in the crossed beam arrangement of the electron spectrometer with an energy resolution of 0.5 eV and angular resolution of 1.5∘ in the range of scattering angles from 20∘ to 126∘. Both angular behaviour and energy dependence of DCS are obtained in a separate sets of experiments, while the absolute scale is achieved via relative flow method, using helium as a reference gas. All data is corrected for the energy transmission function, changes of primary electron beam current and target pressure, and effective path length (volume correction). DCSs are calculated in relativistic framework by expressing the Mott's cross sections in partial wave expansion. Our results are compared with other available data.
Effective gain measurements in chromium-doped forsterite
NASA Technical Reports Server (NTRS)
Petricevic, V.; Seas, A.; Alfano, R. R.
1991-01-01
Effective gain cross section in tetravalent chromium-doped forsterite laser crystal was measured over the 1180-1330 nm spectral range. The experiment was performed using two collinear laser beams in a pump-and-probe arrangement. The peak-gain cross section from this measurement is estimated to be 1.9 x 10 to the -19th sq cm at 1215 nm, which is comparable to the value of about 2 x 10 to the -19th sq cm predicted by fluorescence linewidth and lifetime measurements. These results indicate that excited-state absorption is not a major loss mechanism in tetravalent chromium-doped forsterite.
ERIC Educational Resources Information Center
Goodsell, David S.
2011-01-01
Diverse biological data may be used to create illustrations of molecules in their cellular context. This report describes the scientific results that support an illustration of a eukaryotic cell, enlarged by one million times to show the distribution and arrangement of macromolecules. The panoramic cross section includes eight panels that extend…
NASA Astrophysics Data System (ADS)
Sakarya, Doǧan Uǧur
2017-05-01
Drag force effect is an important aspect of range performance in missile applications especially for long flight time. However, old fashioned gimbal approaches force to increase missile diameter. This increase has negative aspect of rising in both drag force and radar cross sectional area. A new gimbal approach was proposed recently. It uses a beam steering optical arrangement. Therefore, it needs less volume envelope for same field of regard and same optomechanical assembly than the old fashioned gimbal approaches. In addition to longer range performance achieved with same fuel in the new gimbal approach, this method provides smaller cross sectional area which can be more invisible in enemies' radar. In this paper, the two gimbal approaches - the old fashioned one and the new one- are compared in order to decrease drag force and radar cross sectional area in missile application. In this study; missile parameters are assumed to generate gimbal and optical design parameters. Optical design is performed according to these missile criteria. Two gimbal configurations are designed with respect to modeled missile parameters. Also analyzes are performed to show decreased drag force and radar cross sectional area in the new approach for comparison.
Moving Bed Granular Bed Filter Development Program. Topical report, September 1994
DOE Office of Scientific and Technical Information (OSTI.GOV)
Haas, J.C.; Prudhomme, J.W.; Wilson, K.W.
1994-09-01
Five test arrangements have been designed to support the Granular Bed Filter Development Program as defined in the Test Plan. The first arrangement is a 3.6 ft. diameter half filter, with a glass covering along the cross section to allow visual examination of the granular alumina material passing through the filter. The second test arrangement is a 3.6 ft diameter full size filter having refractory lining to simulate actual surface roughness conditions. The third test arrangement will examine filter geometry scale up by testing a 6.0 ft. diameter full size filter. The fourth Test Arrangement consists of a small 12more » inch diameter fluidizer to measure the minimum fluidization velocity of the 7 m (approx. size) alumina material to be used in the filter assemblies. The last Test Unit is used to evaluation relative abrasion characteristics of potential refractory and ceramic materials to be installed in high abrasion areas in the pneumatic transport piping.« less
Flores, Romeo M.; Erpenbeck, Michael F.
1982-01-01
This report illustrates and describes the detailed stratigraphic framework and coal correlation of the Upper Cretaceous Fruitland Formation exposed in isolated badlands and along washes within a 20-mile outcrop belt in the Bisti-Ah-Shi-Sle-Pah area, southwestern San Juan Basin, Nex Mexico (see index). The stratigraphic framework showing the vertical and lateral distributions of rock types and the lateral continuity of coal beds is illustrated in cross sections. The cross sections were constructed from 112 stratigraphic sections measured at an average distance of 0.4 mi apart. Each section contained key marker beds (sandstone, coal, and tonstein) that were physically traced to adjacent sections. Each measured section was "hung" on multiple marker beds arranged in a geometric best-fit method that accounts for the differential compaction and facies associations of the deposits.
What Determines Employment of Part-Time Faculty in Higher Education Institutions?
ERIC Educational Resources Information Center
Liu, Xiangmin; Zhang, Liang
2007-01-01
This study uses a cross-section national sample of four-year colleges and universities in the United States to examine the variation of part-time faculty employment. Results of this study suggest that higher educational institutions actively design and adopt contingent work arrangements to save on labor costs and to manage their resource…
Legido-Quigley, Helena; Glinos, Irene A; Baeten, Rita; McKee, Martin; Busse, Reinhard
2012-11-01
This paper proposes a framework for analyzing arrangements set up to facilitate cross-border mobility of patients in the European Union. Exploiting both conceptual analysis and data from a range of case studies carried out in a number of European projects, and building on Walt and Gilson's model of policy analysis, the framework consists of five major components, each with a subset of categories or issues: (1) The actors directly and indirectly involved in setting up and promoting arrangements, (2) the content of the arrangements, classified into four categories (e.g. purchaser-provider and provider-provider or joint cross-border providers), (3) the institutional framework of the arrangements (including the underlying European and national legal frameworks, health systems' characteristics and payment mechanisms), (4) the processes that have led to the initiation and continuation, or cessation, of arrangements, (5) contextual factors (e.g. political or cultural) that impact on cross-border patient mobility and thus arrangements to facilitate them. The framework responds to what is a clearly identifiable demand for a means to analyse these interrelated concepts and dimensions. We believe that it will be useful to researchers studying cross-border collaborations and policy makers engaging in them. Crown Copyright © 2012. Published by Elsevier Ireland Ltd. All rights reserved.
Kooshiar, Hadi; Yahaya, Nurizan; Hamid, Tengku Aizan; Abu Samah, Asnarulkhadi; Sedaghat Jou, Vajiheh
2012-01-01
Background This cross-sectional and correlational survey examines the association between different types of living arrangements and life satisfaction in older Malaysians, while taking into account the mediating effects of social support function. Methodology and Findings A total of 1880 of older adults were selected by multistage stratified sampling. Life satisfaction and social support were measured with the Philadelphia Geriatric Center Morale Scale and Medical Outcomes Study Social Support Survey. The result shows living with children as the commonest type of living arrangement for older adults in peninsular Malaysia. Compared to living alone, living only with a spouse especially and then co-residency with children were both associated with better life satisfaction (p<.01) and social support function (p<.01). The mediating effect of social support function enhanced the relation between living arrangements and life satisfaction. Conclusion This study revealed that types of living arrangement directly, and indirectly through social support function, play an important role in predicting life satisfaction for older adults in Malaysia. This study makes remarkable contributions to the Convoy model in older Malaysians. PMID:22912806
Living arrangements and suicidal ideation among the Korean older adults.
Kim, Jibum; Lee, Yun-Suk; Lee, Jinkook
2016-12-01
This study examines how living arrangements are associated with suicidal ideation for older adults in South Korea, which has the highest suicide rate among OECD countries, and a particularly high suicide rate for older persons. Analyzing a sample of 5795 women and 3758 men aged 65 and older from a nationwide representative cross-sectional data-set, we examined how many older adults think about suicide over a one-year period, why they think about suicide, and whether living arrangements are associated with suicidal ideation. About 1 out of 12 respondents in our sample reported suicidal ideation. While women and men did not differ in the prevalence of suicidal ideation, women attributed their suicidal feelings to health problems, while men attributed theirs to economic difficulties. Logistic regression results indicated that living arrangements are associated with suicidal ideation for men but not women. Older men living with a spouse were less likely to have suicidal ideation than older men with other living arrangements (i.e., living alone, living with children without spouse, living with spouse, and others). Our results highlight the importance of living arrangements to older men's suicidal ideation. We discuss gender differences in the implications of living arrangements to suicidal ideation within the context of Confucian culture.
Living Arrangements and Suicidal Ideation among the Korean Elderly
Kim, Jibum; Lee, Yun-Suk; Lee, Jinkook
2016-01-01
Objectives This study examines how living arrangements are associated with suicidal ideation for older adults in South Korea, which has the highest suicide rate among OECD countries, and a particularly high suicide rate for older persons. Methods Analyzing a sample of 5,795 women and 3,758 men aged 65 and older from a nationwide representative cross-sectional data set, we examined how many older adults think about suicide over a one-year period, why they think about suicide, and whether living arrangements are associated with suicidal ideation. Results About one out of twelve respondents in our sample reported suicidal ideation. While women and men did not differ in the prevalence of suicidal ideation, women attributed their suicidal feelings to health problems, while men attributed theirs to economic difficulties. Logistic regression results indicated that living arrangements are associated with suicidal ideation for men but not women. Older men living with a spouse were less likely to have suicidal ideation than older men with other living arrangements (i.e., living alone, living with children without spouse, living with spouse and others). Conclusions Our results highlight the importance of living arrangements to older men’s suicidal ideation. We discuss gender differences in the implications of living arrangements to suicidal ideation within the context of Confucian culture. PMID:26317145
DOE Office of Scientific and Technical Information (OSTI.GOV)
Teichmann, Katharina; Marioara, Calin D.; Andersen, Sigmund J.
The interaction mechanisms between dislocations and semi-coherent, needle-shaped {beta} Prime precipitates in Al-Mg-Si alloys have been studied by High Resolution Transmission Electron Microscopy (HRTEM). Dislocation loops appearing as broad contrast rings around the precipitate cross-sections were identified in the Al matrix. A size dependency of the interaction mechanism was observed; the precipitates were sheared when the longest dimension of their cross-section was shorter than approximately 15 nm, and looped otherwise. A more narrow ring located between the Al matrix and bulk {beta} Prime indicates the presence of a transition interface layer. Together with the bulk {beta} Prime structure, this wasmore » further investigated by High Angle Annular Dark Field Scanning TEM (HAADF-STEM). In the bulk {beta} Prime a higher intensity could be correlated with a third of the Si-columns, as predicted from the published structure. The transition layer incorporates Si columns in the same arrangement as in bulk {beta} Prime , although it is structurally distinct from it. The Z-contrast information and arrangement of these Si-columns demonstrate that they are an extension of the Si-network known to structurally connect all the precipitate phases in the Al-Mg-Si(-Cu) system. The width of the interface layer was estimated to about 1 nm. - Highlights: Black-Right-Pointing-Pointer {beta} Prime is found to be looped at sizes larger than 15 nm (cross section diameter). Black-Right-Pointing-Pointer {beta} Prime is found to be sheared at sizes smaller than 15 nm (cross section diameter). Black-Right-Pointing-Pointer The recently determined crystal structure of {beta} Prime is confirmed by HAADF-STEM. Black-Right-Pointing-Pointer Between {beta} Prime and the Al-matrix a transition layer of about 1 nm is existent. Black-Right-Pointing-Pointer The {beta} Prime /matrix layer is structurally distinct from bulk {beta} Prime and the aluminium matrix.« less
Rayleigh, Compton and K-shell radiative resonant Raman scattering in 83Bi for 88.034 keV γ-rays
NASA Astrophysics Data System (ADS)
Kumar, Sanjeev; Sharma, Veena; Mehta, D.; Singh, Nirmal
2007-11-01
The Rayleigh, Compton and K-shell radiative resonant Raman scattering cross-sections for the 88.034 keV γ-rays have been measured in the 83Bi (K-shell binding energy = 90.526 keV) element. The measurements have been performed at 130° scattering angle using reflection-mode geometrical arrangement involving the 109Cd radioisotope as photon source and an LEGe detector. Computer simulations were exercised to determine distributions of the incident and emission angles, which were further used in evaluation of the absorption corrections for the incident and emitted photons in the target. The measured cross-sections for the Rayleigh scattering are compared with the modified form-factors (MFs) corrected for the anomalous-scattering factors (ASFs) and the S-matrix calculations; and those for the Compton scattering are compared with the Klein-Nishina cross-sections corrected for the non-relativistic Hartree-Fock incoherent scattering function S(x, Z). The ratios of the measured KL2, KL3, KM and KN2,3 radiative resonant Raman scattering cross-sections are found to be in general agreement with those of the corresponding measured fluorescence transition probabilities.
Fuel cell system configurations
Kothmann, Richard E.; Cyphers, Joseph A.
1981-01-01
Fuel cell stack configurations having elongated polygonal cross-sectional shapes and gaskets at the peripheral faces to which flow manifolds are sealingly affixed. Process channels convey a fuel and an oxidant through longer channels, and a cooling fluid is conveyed through relatively shorter cooling passages. The polygonal structure preferably includes at least two right angles, and the faces of the stack are arranged in opposite parallel pairs.
Determination of transverse elastic constants of wood using a cylindrically orthotropic model
John C. Hermanson
2003-01-01
The arrangement of anatomical elements in the cross section of a tree can be characterized, at least to a first approximation, with a cylindrical coordinate system. It seems reasonable that the physical properties of wood in the transverse plane, therefore, would exhibit behaviour that is associated with this anatomical alignment. Most of the transverse properties of...
NASA Astrophysics Data System (ADS)
Chakraborty, Dipayan; Nag, Pamir; Nandi, Dhananjay
2018-02-01
A new time of flight mass spectrometer (TOFMS) has been developed to study the absolute dissociative electron attachment (DEA) cross section using a relative flow technique of a wide variety of molecules in gas phase, ranging from simple diatomic to complex biomolecules. Unlike the Wiley-McLaren type TOFMS, here the total ion collection condition has been achieved without compromising the mass resolution by introducing a field free drift region after the lensing arrangement. The field free interaction region is provided for low energy electron molecule collision studies. The spectrometer can be used to study a wide range of masses (H- ion to few hundreds atomic mass unit). The mass resolution capability of the spectrometer has been checked experimentally by measuring the mass spectra of fragment anions arising from DEA to methanol. Overall performance of the spectrometer has been tested by measuring the absolute DEA cross section of the ground state SO2 molecule, and the results are satisfactory.
Current and planned shared service arrangements in Wisconsin local and tribal health departments.
Madamala, Kusuma; Young, Nancy; Young, Dustin; Giese, Lieske; Brandenberg, Terry; Zahner, Susan
2014-01-01
The objective of this study was to explore current and future use of shared service arrangements as a management strategy to increase capacity to provide public health essential services in Wisconsin. An online cross-sectional survey of 99 local and tribal health departments in Wisconsin was conducted. Select variables from the 2010 Wisconsin Local Health Department Survey were merged. Other data sources included results from a Board of Health governance analysis and the Wisconsin Department of Health Services region data. Descriptive analysis was performed of current and future shared service arrangements and the characteristics of the types of arrangements and agreements in place. Ninety-one of 99 Wisconsin local and tribal health departments responded, yielding a 92% response rate. Seventy-one percent of respondents currently share services with 1 or more other health departments. More frequent arrangements were present in programmatic areas than in departmental operations. Most frequently reported motivators include making better use of resources, providing better services, and responding to program requirements. Extensive qualitative comments indicate arrangements accomplished what the local health department hoped it would with perceived gains in efficiency and effectiveness. There is widespread use of shared services among health departments in Wisconsin. Extensive qualitative comments suggest participant satisfaction with what the arrangements have accomplished. Motivating factors in developing the arrangements and limited mention of expiration dates suggest continued study of how these arrangements may evolve. Further examination of shared services as a potential mechanism to advance service effectiveness and efficiency is needed.
NASA Astrophysics Data System (ADS)
Bobkov, V. P.
2015-02-01
Some general matters concerned with description of burnout in channels are outlined. Data obtained from experimental investigations on critical heat fluxes (CHF) in different channels, CHF data banks, the main determining parameters, CHF basic dependences, and a system of correction functions are discussed. Two methods for estimating the CHF description errors are analyzed. The influence of operating parameters, transverse sizes of channels, and conditions at their inlet are analyzed. The effects of heat-transfer surface shape and heat supply arrangement are considered for concentric annular channels. The notions of a thermal boundary layer and an elementary thermal cell during burnout in channels with an intricate cross section are defined. New notions for describing CHF in rod assemblies are introduced: bundle effect, thermal misalignment, assembly-section-averaged and local parameters (for an elementary cell), cell-wise CHF analysis in bundles, and standard and nonstandard cells. Possible influence of wall thermophysical properties on CHF in dense assemblies and other effects are considered. Thermal interaction of nonequivalent cells and the effect of heat supply arrangement over the cell perimeter are analyzed. Special attention is paid to description of the effect the heat release nonuniformity along the channels has on CHF. Objectives to be pursued by studies of CHF in channels of different cross-section shapes are formulated.
Coaxial microreactor for particle synthesis
Bartsch, Michael; Kanouff, Michael P; Ferko, Scott M; Crocker, Robert W; Wally, Karl
2013-10-22
A coaxial fluid flow microreactor system disposed on a microfluidic chip utilizing laminar flow for synthesizing particles from solution. Flow geometries produced by the mixing system make use of hydrodynamic focusing to confine a core flow to a small axially-symmetric, centrally positioned and spatially well-defined portion of a flow channel cross-section to provide highly uniform diffusional mixing between a reactant core and sheath flow streams. The microreactor is fabricated in such a way that a substantially planar two-dimensional arrangement of microfluidic channels will produce a three-dimensional core/sheath flow geometry. The microreactor system can comprise one or more coaxial mixing stages that can be arranged singly, in series, in parallel or nested concentrically in parallel.
Fabrication of an X-Ray Imaging Detector
NASA Technical Reports Server (NTRS)
Alcorn, G. E.; Burgess, A. S.
1986-01-01
X-ray detector array yields mosaic image of object emitting 1- to 30-keV range fabricated from n-doped silicon wafer. In proposed fabrication technique, thin walls of diffused n+ dopant divide wafer into pixels of rectangular cross section, each containing central electrode of thermally migrated p-type metal. This pnn+ arrangement reduces leakage current by preventing transistor action caused by pnp structure of earlier version.
Multistatic GNSS Receiver Array for Passive Air Surveillance
NASA Astrophysics Data System (ADS)
Wachtl, Stefan; Koch, Volker; Westphal, Robert; Schmidt, Lorenz-Peter
2016-03-01
The performance of a passive air surveillance sensor based on Global Navigation Satellite Systems (GNSS) is mainly limited by the receiver noise efficiency, the achievable signal processing gain and the radar cross section (RCS) of an airplane. For surveillance applications large detection ranges as well as a high probability of detection are crucial parameters. Due to the very low GNSS signal powers received on the earth's surface, high radar cross sections are mandatory to achieve detection ranges for airplanes at some kilometers distance. This paper will discuss a multistatic transmitter and receiver arrangement, which is indispensable to get a reasonable detection rate with respect to a hemispheric field of view. The strong performance dependency of such a sensor on the number of transmitters and receivers will be shown by means of some exemplary simulation results.
First results from gamma ray diagnostics in EAST Tokamak
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhou, R. J.; Hu, L. Q.; Zhong, G. Q., E-mail: gqzhong@ipp.ac.cn
2016-11-15
Gamma ray diagnostics has been developed in the EAST tokamak recently. Six BGO scintillator detectors are arranged on the down-half cross-section and pointed at the up-half cross-section of plasma, with space resolution about 15 cm and energy range from 0.3 MeV to 6 MeV. Three main gamma ray peaks in the energy spectra have been observed and are identified as the results of nuclear reactions {sup 207}Pb(n, n′){sup 207m}Pb, H(n, γ) D, and D(p, γ){sup 3}He, respectively. Upgrading of the system is in progress by using LaBr3(Ce) scintillator, fast photo-multiplier tubes, and a fully digital data acquisition system based onmore » high sample frequency digitizers with digital pulse processing algorithms.« less
NASA Astrophysics Data System (ADS)
Pirunčík, Jiří; Kwiecien, Pavel; Fiala, Jan; Richter, Ivan
2017-05-01
This contribution is focused on the numerical studies of resonant processes in individual plasmonic nanostructures, with the attention particularly given to rectangular nanoparticles and concominant localized surface plasmon resonance processes. Relevant models for the description and anylysis of localized surface plasmon resonance are introduced, in particular: quasistatic approximation, Mie theory and in particular, a generalized (quasi)analytical approach for treating rectangularly shaped nanostructures. The parameters influencing resonant behavior of nanoparticles are analyzed with special interest in morphology and sensor applications. Results acquired with Lumerical FDTD Solutions software, using finite-difference time-domain simulation method, are shown and discussed. Simulations were mostly performed for selected nanostructures composed of finite rectangular nanowires with square cross-sections. Systematic analysis is made for single nanowires with varying length, parallel couple of nanowires with varying gap (cut -wires) and selected dolmen structures with varying gap between one nanowire transversely located with respect to parallel couple of nanowires (in both in-plane and -out-of-plane arrangements). The dependence of resonant peaks of cross-section spectral behavior (absorption, scattering, extinction) and their tunability via suitable structuring and morphology changes are primarily researched. These studies are then followed with an analysis of the effect of periodic arrangements. The results can be usable with respect to possible sensor applications.
Complete band gaps of phononic crystal plates with square rods.
El-Naggar, Sahar A; Mostafa, Samia I; Rafat, Nadia H
2012-04-01
Much of previous work has been devoted in studying complete band gaps for bulk phononic crystal (PC). In this paper, we theoretically investigate the existence and widths of these gaps for PC plates. We focus our attention on steel rods of square cross sectional area embedded in epoxy matrix. The equations for calculating the dispersion relation for square rods in a square or a triangular lattice have been derived. Our analysis is based on super cell plane wave expansion (SC-PWE) method. The influence of inclusions filling factor and plate thickness on the existence and width of the phononic band gaps has been discussed. Our calculations show that there is a certain filling factor (f=0.55) below which arrangement of square rods in a triangular lattice is superior to the arrangement in a square lattice. A comparison between square and circular cross sectional rods reveals that the former has superior normalized gap width than the latter in case of a square lattice. This situation is switched in case of a triangular lattice. Moreover, a maximum normalized gap width of 0.7 can be achieved for PC plate of square rods embedded in a square lattice and having height 90% of the lattice constant. Copyright © 2011 Elsevier B.V. All rights reserved.
Measurements of Rayleigh, Compton and resonant Raman scattering cross-sections for 59.536 keV γ-rays
NASA Astrophysics Data System (ADS)
Singh, Prem; Mehta, D.; Singh, N.; Puri, S.; Shahi, J. S.
2004-09-01
The K-L and K-M resonant Raman scattering (RRS) cross-sections have been measured for the first time at the 59.536 keV photon energy in the 70Yb ( BK=61.332 keV), 71Lu ( BK=63.316 keV) and 72Hf ( BK=65.345 keV) elements; BK being the K-shell binding energy. The K-L and K-M RRS measurements have been performed at the 59° and 133° angles, respectively, to avoid interference of the Compton-scatter peak. The Rayleigh and Compton scattering cross-sections for the 59.536 keV γ-rays have also been measured at both the angles in the atomic region 1⩽ Z⩽92. Measurements were performed using the reflection-mode geometrical arrangements involving the 241Am radioisotope as photon source and planar Si(Li) and HPGe detectors. Ratios of the K-M and K-L RRS cross-sections in Yb, Lu and Hf are in general lower than that of the fluorescent Kβ 1,3,5 (K-M) and Kα (K-L) X-ray transition probabilities. Theoretical Rayleigh scattering cross-sections based on the modified form-factors (MFs) corrected for the anomalous scattering factors (ASFs) and the S-matrix calculations are on an average ˜15% and ˜6% higher, respectively, at the 133° angle and exhibit good agreement with the measured data at the 59° angle. Larger deviations ˜30% and ˜20%, respectively, are observed at the 133° angle for the 64Gd, 66Dy, 67Ho and 70Yb elements having the K-shell binding energy in vicinity of the incident photon energy. The measured Compton scattering cross-sections are in general agreement with those calculated using the Klein-Nishina cross-sections and the incoherent scattering function.
NASA Technical Reports Server (NTRS)
Stone, J. E.
1975-01-01
The effects of fuselage cross section and structural arrangement on the performance of actively cooled hypersonic cruise vehicles are investigated. An active cooling system which maintains the aircraft's entire surface area at temperatures below 394 K at Mach 6 is developed along with a hydrogen fuel tankage thermal protection system. Thermodynamic characteristics of the actively cooled thermal protection systems established are summarized. Design heat loads and coolant flowrate requirements are defined for each major structural section and for the total system. Cooling system weights are summarized at the major component level. Conclusions and recommendations are included.
Modular low-aspect-ratio high-beta torsatron
Sheffield, G.V.
1982-04-01
A fusion-reactor device is described which the toroidal magnetic field and at least a portion of the poloidal magnetic field are provided by a single set of modular coils. The coils are arranged on the surface of a low-aspect-ratio toroid in planed having the cylindrical coordinate relationship phi = phi/sub i/ + kz, where k is a constant equal to each coil's pitch and phi/sub i/ is the toroidal angle at which the i'th coil intersects the z = o plane. The toroid defined by the modular coils preferably has a race track minor cross section. When vertical field coils and, preferably, a toroidal plasma current are provided for magnetic-field-surface closure within the toroid, a vacuum magnetic field of racetrack-shaped minor cross section with improved stability and beta valves is obtained.
Temperature dependence of the ClONO2 UV absorption spectrum
NASA Technical Reports Server (NTRS)
Burkholder, James B.; Talukdar, Ranajit K.; Ravishankara, A. R.
1994-01-01
The temperature dependence of the ClONO2 absorption spectrum has been measured between 220 and 298 K and between 195 and 430 nm using a diode array spectrometer. The absorption cross sections were determined using both: (1) absolute pressure measurements at 296 K and (2) measurements at various temperatures relative to 296 K using a dual absorption cell arrangement. The temperature dependence of the ClONO2 absorption spectrum shows very broad structure. The amplitude of the temperature dependence relative to that at 296 K is weak at short wavelengths, less than 2% at 215 nm and 220 K, but significant at the wavelengths important in the stratosphere, about 30% at 325 nm and 220 K. Our ClONO2 absorption cross section data are in good general agreement with the previous measurements of Molina and Molina (1979).
Cross-section analysis of the Magnum-PSI plasma beam using a 2D multi-probe system
NASA Astrophysics Data System (ADS)
Costin, C.; Anita, V.; Ghiorghiu, F.; Popa, G.; De Temmerman, G.; van den Berg, M. A.; Scholten, J.; Brons, S.
2015-02-01
The linear plasma generator Magnum-PSI was designed for the study of plasma-surface interactions under relevant conditions of fusion devices. A key factor for such studies is the knowledge of a set of parameters that characterize the plasma interacting with the solid surface. This paper reports on the electrical diagnosis of the plasma beam in Magnum-PSI using a multi-probe system consisting of 64 probes arranged in a 2D square matrix. Cross-section distributions of floating potential and ion current intensity were registered for a hydrogen plasma beam under various discharge currents (80-175 A) and magnetic field strengths (0.47-1.41 T in the middle of the coils). Probe measurements revealed a high level of flexibility of plasma beam parameters with respect to the operating conditions.
Cooling using complimentary tapered plenums
Hall, Shawn Anthony [Pleasantville, NY
2006-08-01
Where a fluid cooling medium cools a plurality of heat-producing devices arranged in a row along a generalized coordinate direction, with a space between each adjacent pair of devices, each space may have a partition that defines a boundary between a first plenum and a second plenum. The first plenum carries cooling medium across an entrance and thence into a first heat-producing device located on a first side of the partition facing the first plenum. The second plenum carries cooling medium away from a second heat-producing device located on a second side of the partition facing the second plenum and thence across an exit. The partition is disposed so that the first plenum becomes smaller in cross-sectional area as distance increases from the entrance, and the second plenum becomes larger in cross sectional area as distance decreases toward the exit.
Living arrangements and mental health in Finland
Joutsenniemi, Kaisla; Martelin, Tuija; Martikainen, Pekka; Pirkola, Sami; Koskinen, Seppo
2006-01-01
Background Non‐married persons are known to have poor mental health compared with married persons. Health differences between marital status groups may largely arise from corresponding differences in interpersonal social bonds. However, official marital status mirrors the social reality of persons to a decreasing extent, and living arrangements may be a better measure of social bonds. Little is known about mental health in different living arrangement groups. This study aims to establish the extent and determinants of mental health differences by living arrangement in terms of psychological distress (GHQ) and DSM‐IV psychiatric disorders (CIDI). Methods Data were used from the nationally representative cross sectional health 2000 survey, conducted in 2000–1 in Finland. Altogether 4685 participants (80%) aged 30–64 years were included in these analyses; comprehensive information was available on measures of mental health and living arrangements. Living arrangements were measured as follows: married, cohabiting, living with other(s) than a partner, and living alone. Results Compared with the married, persons living alone and those living with other(s) than a partner were approximately twice as likely to have anxiety or depressive disorders. Cohabiters did not differ from the married. In men, psychological distress was similarly associated with living arrangements. Unemployment, lack of social support, and alcohol consumption attenuated the excess psychological distress and psychiatric morbidity of persons living alone and of those living with other(s) than a partner by about 10%–50% each. Conclusions Living arrangements are strongly associated with mental health, particularly among men. Information on living arrangements, social support, unemployment, and alcohol use may facilitate early stage recognition of poor mental health in primary health care. PMID:16698975
NASA Astrophysics Data System (ADS)
Ameri, Edris; Esmaeli, Seyed Hassan; Sedighy, Seyed Hassan
2018-05-01
A planar low cost and thin metasurface is proposed to achieve ultra-wideband radar cross section (RCS) reduction with stable performance with respect to polarization and incident angles. This metasurface is composed of two different artificial magnetic conductor unit cells arranged in a chessboard like configuration. These unit cells have a Jerusalem cross pattern with different thicknesses, which results in wideband out-phase reflection and RCS reduction, consequently. The designed metasurface reduces RCS more than 10-dB from 13.6 GHz to 45.5 GHz (108% bandwidth) and more than 20-dB RCS from 15.2 GHz to 43.6 GHz (96.6%). Moreover, the 10-dB RCS reduction bandwidth is very stable (more than 107%) for both TE and TM polarizations. The good agreement between simulations and measurement results proves the design, properly. The ultra-wide bandwidth, low cost, low profile, and stable performance of this metasurface prove its high capability compared with the state-of-the-art references.
Probe systems for static pressure and cross-stream turbulence intensity
NASA Technical Reports Server (NTRS)
Rossow, Vernon, J.
1991-01-01
A recent study of total-pressure probes for use in highly turbulent streams is extended herein by developing probe systems that measure time-averaged static or ambient pressure and turbulence intensity. Arrangements of tubular probes of circular and elliptical cross section are described that measure the pressure at orifices on the sides of the probes to obtain different responses to the cross-stream velocity fluctuations. When the measured data are combined to remove the effect of the presence of the probes on the local pressure, the time-averaged static pressure and the cross-stream components of turbulence intensity can be determined. If a system of total pressure tubes, as described in an accompanying paper, is added to the static pressure group to form a single cluster, redundant measurements are obtained that permit accuracy and consistency checks.
Correlations between axial stiffness and microstructure of a species of bamboo
Mannan, Sayyad; Paul Knox, J.
2017-01-01
Bamboo is a ubiquitous monocotyledonous flowering plant and is a member of the true grass family Poaceae. In many parts of the world, it is widely used as a structural material especially in scaffolding and buildings. In spite of its wide use, there is no accepted methodology for standardizing a species of bamboo for a particular structural purpose. The task of developing structure–property correlations is complicated by the fact that bamboo is a hierarchical material whose structure at the nanoscopic level is not very well explored. However, we show that as far as stiffness is concerned, it is possible to obtain reliable estimates of important structural properties like the axial modulus from the knowledge of certain key elements of the microstructure. Stiffness of bamboo depends most sensitively on the size and arrangement of the fibre sheaths surrounding the vascular bundles and the arrangement of crystalline cellulose microfibrils in their secondary cell walls. For the species of bamboo studied in this work, we have quantitatively determined the radial gradation that the arrangement of fibres renders to the structure. The arrangement of the fibres gives bamboo a radially graded property variation across its cross section. PMID:28280545
Effect of screens in wide-angle diffusers
NASA Technical Reports Server (NTRS)
Schubauer, G B; Spangenberg, W G
1949-01-01
An experimental investigation at low airspeeds was made of the filling effect observed when a screen or similar resistance is placed across a diffuser. The filling effect is found to be real in that screens can prevent separation or restore separated flow in diffusers even of extreme divergence and to depend principally on screen location and pressure-drop coefficient of the screen. Results are given for three different diffusers of circular cross section with a variety of screen arrangements. Effects of single screens and multiple screens are shown. The mechanics of the filling effect is explained, and possible efficiencies are discussed. Results of arrangements of multiple screens in wide-angle diffusers are given to show a possible application to damping screens as used in wind tunnels to reduce turbulence. (author)
Laboratory directed research and development program FY 1997
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1998-03-01
This report compiles the annual reports of Laboratory Directed Research and Development projects supported by the Berkeley Lab. Projects are arranged under the following topical sections: (1) Accelerator and fusion research division; (2) Chemical sciences division; (3) Computing Sciences; (4) Earth sciences division; (5) Environmental energy technologies division; (6) life sciences division; (7) Materials sciences division; (8) Nuclear science division; (9) Physics division; (10) Structural biology division; and (11) Cross-divisional. A total of 66 projects are summarized.
The organization of honeybee ocelli: Regional specializations and rhabdom arrangements.
Ribi, Willi; Warrant, Eric; Zeil, Jochen
2011-11-01
We have re-investigated the organization of ocelli in honeybee workers and drones. Ocellar lenses are divided into a dorsal and a ventral part by a cusp-shaped indentation. The retina is also divided, with a ventral retina looking skywards and a dorsal retina looking at the horizon. The focal plane of lenses lies behind the retina in lateral ocelli, but within the dorsal retina in the median ocellus of both workers and drones. Ventral retinula cells are ca. 25μm long with dense screening pigments. Dorsal retinula cells are ca. 60μm long with sparse pigmentation mainly restricted to their proximal parts. Pairs of retinula cells form flat, non-twisting rhabdom sheets with elongated, straight, rectangular cross-sections, on average 8.7μm long and 1μm wide. Honeybee ocellar rhabdoms have shorter and straighter cross-sections than those recently described in the night-active bee Megalopta genalis. Across the retina, rhabdoms form a fan-shaped pattern of orientations. In each ocellus, ventral and dorsal retinula cell axons project into two separate neuropils, converging on few large neurons in the dorsal, and on many small neurons in the ventral neuropil. The divided nature of the ocelli, together with the particular construction and arrangement of rhabdoms, suggest that ocelli are not only involved in attitude control, but might also provide skylight polarization compass information. Copyright © 2011 Elsevier Ltd. All rights reserved.
Han, Sang Kuy; Chen, Chao-Wei; Wierwille, Jerry; Chen, Yu; Hsieh, Adam H.
2014-01-01
The defining characteristic of the annulus fibrosus (AF) of the intervertebral disc (IVD) has long been the lamellar structures that consist of highly ordered collagen fibers arranged in alternating oblique angles from one layer to the next. However, a series of recent histologic studies have demonstrated that AF lamellae contain elastin- and type VI collagen-rich secondary “cross-bridge” structures across lamellae. In this study, we use optical coherence tomography (OCT) to elucidate the three-dimensional (3D) morphologies of these translamellar cross-bridge in AF tissues. Mesoscale volumetric images by OCT reveal a highly heterogeneous spatial network and distribution of 3-D translamellar cross-bridges. The results of this study confirm the translamellar cross-bridge is identified as a distinguishable structure, which is laid in the interbundle space of adjacent lamellae and crisscrosses multiple lamellae in the radial direction. In contrast to previously proposed models extrapolated from 2-D sections, results from this current study show that translamellar cross-bridges exist as a complex, interconnected network. We also found much greater variation in lengths of cross-bridges within the interbundle space of lamellae (0.8-1.4 mm from the current study versus 0.3-0.6 mm from 2-D sections). OCT-based 3-D morphology of translamellar cross-bridge provides novel insight into the AF structure. PMID:25564974
Wimsatt, Maureen A.
2017-01-01
Each American Indian tribe is unique in several ways, including in its relationships with local governments and risk for emergencies. Cross-jurisdictional sharing (CJS) arrangements are encouraged between tribes and counties for emergency management-related population health, but researchers have not yet explored CJS experiences of tribes and counties for emergency management. This investigation used collaboration theory and a CJS spectrum framework to assess the scope and prevalence of tribe–county CJS arrangements for emergency management in California as well as preconditions to CJS. Mixed-methods survey results indicate that tribes and counties have varied CJS arrangements, but many are informal or customary. Preconditions to CJS include tribe–county agreement about having CJS, views of the CJS relationship, barriers to CJS, and jurisdictional strengths and weaknesses in developing CJS arrangements. Areas for public health intervention include funding programs that build tribal capacity in emergency management, reduce cross-jurisdictional disagreement, and promote ongoing tribe–county relationships as a precursor to formal CJS arrangements. Study strengths, limitations, and future directions are also discussed. PMID:28983479
Temperature dependence of the ClONO{sub 2} UV absorption spectrum
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burkholder, J.B.; Talukdar, R.K.; Ravishankara, A.R.
1994-04-01
The temperature dependence of the ClONO{sub 2} absorption spectrum has been measured between 220 and 298 K and between 195 and 430 nm using a diode array spectrometer. The absorption cross sections were determined using both: (1) absolute pressure measurements at 296 K and (2) measurements at various temperatures relative to 296 K using a dual absorption cell arrangement. The temperature dependence of the ClONO{sub 2} absorption spectrum shows very broad structure. The amplitude of the temperature dependence relative to that at 296 K is weak at short wavelengths, < 2% at 215 nm and 220 K, but significant atmore » the wavelengths important in the stratosphere, {approximately} 30% at 325 nm and 220 K. The authors ClONO{sub 2} absorption cross section data are in good general agreement with the previous measurements of Molina and Molina.« less
Splash control of drop impacts with geometric targets.
Juarez, Gabriel; Gastopoulos, Thomai; Zhang, Yibin; Siegel, Michael L; Arratia, Paulo E
2012-02-01
Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim breaks up into an irregular arrangement of filaments and secondary droplets. We show experimentally that the lamella expansion and subsequent breakup of the outer rim can be controlled by length scales that are of comparable dimension to the impacting drop diameter. Under identical impact parameters (i.e., fluid properties and impact velocity) we observe unique splashing dynamics by varying the target cross-sectional geometry. These behaviors include (i) geometrically shaped lamellae and (ii) a transition in splashing stability, from regular to irregular splashing. We propose that regular splashes are controlled by the azimuthal perturbations imposed by the target cross-sectional geometry and that irregular splashes are governed by the fastest-growing unstable Plateau-Rayleigh mode.
Modular low aspect ratio-high beta torsatron
Sheffield, George V.; Furth, Harold P.
1984-02-07
A fusion reactor device in which the toroidal magnetic field and at least a portion of the poloidal magnetic field are provided by a single set of modular coils. The coils are arranged on the surface of a low aspect ratio toroid in planes having the cylindrical coordinate relationship .phi.=.phi..sub.i +kz where k is a constant equal to each coil's pitch and .phi..sub.i is the toroidal angle at which the i'th coil intersects the z=o plane. The device may be described as a modular, high beta torsation whose screw symmetry is pointed along the systems major (z) axis. The toroid defined by the modular coils preferably has a racetrack minor cross section. When vertical field coils and preferably a toroidal plasma current are provided for magnetic field surface closure within the toroid, a vacuum magnetic field of racetrack shaped minor cross section with improved stability and beta valves is obtained.
Absorptive coding metasurface for further radar cross section reduction
NASA Astrophysics Data System (ADS)
Sui, Sai; Ma, Hua; Wang, Jiafu; Pang, Yongqiang; Feng, Mingde; Xu, Zhuo; Qu, Shaobo
2018-02-01
Lossless coding metasurfaces and metamaterial absorbers have been widely used for radar cross section (RCS) reduction and stealth applications, which merely depend on redirecting electromagnetic wave energy into various oblique angles or absorbing electromagnetic energy, respectively. Here, an absorptive coding metasurface capable of both the flexible manipulation of backward scattering and further wideband bistatic RCS reduction is proposed. The original idea is carried out by utilizing absorptive elements, such as metamaterial absorbers, to establish a coding metasurface. We establish an analytical connection between an arbitrary absorptive coding metasurface arrangement of both the amplitude and phase and its far-field pattern. Then, as an example, an absorptive coding metasurface is demonstrated as a nonperiodic metamaterial absorber, which indicates an expected better performance of RCS reduction than the traditional lossless coding metasurface and periodic metamaterial-absorber. Both theoretical analysis and full-wave simulation results show good accordance with the experiment.
Turbine airfoil with controlled area cooling arrangement
Liang, George
2010-04-27
A gas turbine airfoil (10) includes a serpentine cooling path (32) with a plurality of channels (34,42,44) fluidly interconnected by a plurality of turns (38,40) for cooling the airfoil wall material. A splitter component (50) is positioned within at least one of the channels to bifurcate the channel into a pressure-side channel (46) passing in between the outer wall (28) and the inner wall (30) of the pressure side (24) and a suction-side channel (48) passing in between the outer wall (28) and the inner wall (30) of the suction side (26) longitudinally downstream of an intermediate height (52). The cross-sectional area of the pressure-side channel (46) and suction-side channel (48) are thereby controlled in spite of an increasing cross-sectional area of the airfoil along its longitudinal length, ensuring a sufficiently high mach number to provide a desired degree of cooling throughout the entire length of the airfoil.
STEAM PLANT, TRA609. SECTION A SHOWS FEATURES OF NORTH/SOUTH AXIS: ...
STEAM PLANT, TRA-609. SECTION A SHOWS FEATURES OF NORTH/SOUTH AXIS: STEAM GENERATOR AND CATWALK, STACK, DEGREASER FEED WATER HEATER IN PENTHOUSE, MEZZANINE, SURGE TANK PIT (BELOW GROUND LEVEL). UTILITY ROOM SHOWS DIESEL ENGINE GENERATORS, AIR TANKS, STARTING AIR COMPRESSORS. OUTSIDE SOUTH END ARE EXHAUST MUFFLER, AIR INTAKE OIL FILTER, RADIATOR COOLING UNIT, AIR SURGE TANK. SECTION B CROSSES WEST TO EAST NEAR SOUTH END OF BUILDING TO SHOW ARRANGEMENT OF DIESEL ENGINE GENERATOR, AIR DRIER, AFTER COOLER, AIR COMPRESSOR, AND BLOWDOWN TANK. BLAW-KNOX 3150-9-2, 6/1950. INL INDEX NO. 431-0609-00-098-100018, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
Makarov, Nikolay S; Mukhopadhyay, Sukrit; Yesudas, Kada; Brédas, Jean-Luc; Perry, Joseph W; Pron, Agnieszka; Kivala, Milan; Müllen, Klaus
2012-04-19
We have performed a study of the one- and two-photon absorption properties of a systematically varied series of triarylamino-compounds with one, two, or three attached diarylborane arms arranged in linear dipolar, bent dipolar, and octupolar geometries. Two-photon fluorescence excitation spectra were measured over a wide spectral range with femtosecond laser pulses. We found that on going from the single-arm to the two- and three-arm systems, the peak in two-photon absorption (2PA) cross-section is suppressed by factors of 3-11 for the lowest excitonic level associated with the electronic coupling of the arms, whereas it is enhanced by factors of 4-8 for the higher excitonic level. These results show that the coupling of arms redistributes the 2PA cross-section between the excitonic levels in a manner that strongly favors the higher-energy excitonic level. The experimental data on one- and two-photon cross-sections, ground- and excited-state transition dipole moments, and permanent dipole moment differences between the ground and the lowest excited states were compared to the results obtained from a simple Frenkel exciton model and from highly correlated quantum-chemical calculations. It has been found that planarization of the structure around the triarylamine moiety leads to a sizable increase in peak 2PA cross-section for the lowest excitonic level of the two-arm system, whereas for the three-arm system, the corresponding peak was weakened and shifted to lower energy. Our studies show the importance of the interarm coupling, number of arms, and structural planarity on both the enhancement and the suppression of two-photon cross-sections in multiarm molecules. © 2012 American Chemical Society
Cortical Structure of Hallucal Metatarsals and Locomotor Adaptations in Hominoids
Jashashvili, Tea; Dowdeswell, Mark R.; Lebrun, Renaud; Carlson, Kristian J.
2015-01-01
Diaphyseal morphology of long bones, in part, reflects in vivo loads experienced during the lifetime of an individual. The first metatarsal, as a cornerstone structure of the foot, presumably expresses diaphyseal morphology that reflects loading history of the foot during stance phase of gait. Human feet differ substantially from those of other apes in terms of loading histories when comparing the path of the center of pressure during stance phase, which reflects different weight transfer mechanisms. Here we use a novel approach for quantifying continuous thickness and cross-sectional geometric properties of long bones in order to test explicit hypotheses about loading histories and diaphyseal structure of adult chimpanzee, gorilla, and human first metatarsals. For each hallucal metatarsal, 17 cross sections were extracted at regularly-spaced intervals (2.5% length) between 25% and 65% length. Cortical thickness in cross sections was measured in one degree radially-arranged increments, while second moments of area were measured about neutral axes also in one degree radially-arranged increments. Standardized thicknesses and second moments of area were visualized using false color maps, while penalized discriminant analyses were used to evaluate quantitative species differences. Humans systematically exhibit the thinnest diaphyseal cortices, yet the greatest diaphyseal rigidities, particularly in dorsoplantar regions. Shifts in orientation of maximum second moments of area along the diaphysis also distinguish human hallucal metatarsals from those of chimpanzees and gorillas. Diaphyseal structure reflects different loading regimes, often in predictable ways, with human versus non-human differences probably resulting both from the use of arboreal substrates by non-human apes and by differing spatial relationships between hallux position and orientation of the substrate reaction resultant during stance. The novel morphological approach employed in this study offers the potential for transformative insights into form-function relationships in additional long bones, including those of extinct organisms (e.g., fossils). PMID:25635768
Exclusion Area Radiation Release during the MIT Reactor Design Basis Accident.
1983-05-06
Concrete Wall 116 6.2 Concrete Albedo Dose 121 6.3 Steel Door Scattering Dose 124 7.1 Total Dose Results 133 A.1 Values of N /NO for Neutron -Capture...plate fuel elements arranged in x a compact hexagonal core. This core design maximizes the neutron flux in the DO2 reflector region where numerous...sec) V = Volume of the fuel (cm 3 f Ef = Macroscopic fission cross section (cm ) = Thermal neutron flux ( neutrons /cm2 - sec) = Core-averaged value Yi
47 CFR 36.101 - Section arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES JURISDICTIONAL SEPARATIONS... arrangement. (a) This subpart is arranged in sections as follows: General Telecommunications Plant in Service... Assets—Accounts 2680 and 2690—36.161 and 36.162. Telecommunications Plant—Other Accounts 2002 thru 2005...
47 CFR 36.101 - Section arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES JURISDICTIONAL SEPARATIONS... arrangement. (a) This subpart is arranged in sections as follows: General Telecommunications Plant in Service... Assets—Accounts 2680 and 2690—36.161 and 36.162. Telecommunications Plant—Other Accounts 2002 thru 2005...
Impact of employee benefits on families with children with autism spectrum disorders.
Gnanasekaran, Sangeeth; Choueiri, Roula; Neumeyer, Ann; Ajari, Ogheneochuko; Shui, Amy; Kuhlthau, Karen
2016-07-01
The objectives of this study are to evaluate the employee benefits parents of children with autism spectrum disorders have, how benefits are used, work change, and job satisfaction. We conducted a cross-sectional mailed survey study of 435 families with children with autism spectrum disorders residing in the United States. We received 161 surveys for a response rate of 37%. Families reported using the following benefits: 39% paid family leave, 19% unpaid family leave, 91% flexible work arrangements, and 86% telecommuting. Of respondents, 43% reported stopping work, cutting down on hours worked, or changing jobs because of their child's condition. Having paid family leave was a positive predictor for job satisfaction. Parents of children with autism spectrum disorders have an interest and need for alternative work arrangements. © The Author(s) 2015.
Marital status, health and mortality.
Robards, James; Evandrou, Maria; Falkingham, Jane; Vlachantoni, Athina
2012-12-01
Marital status and living arrangements, along with changes in these in mid-life and older ages, have implications for an individual's health and mortality. Literature on health and mortality by marital status has consistently identified that unmarried individuals generally report poorer health and have a higher mortality risk than their married counterparts, with men being particularly affected in this respect. With evidence of increasing changes in partnership and living arrangements in older ages, with rising divorce amongst younger cohorts offsetting the lower risk of widowhood, it is important to consider the implications of such changes for health in later life. Within research which has examined changes in marital status and living arrangements in later life a key distinction has been between work using cross-sectional data and that which has used longitudinal data. In this context, two key debates have been the focus of research; firstly, research pointing to a possible selection of less healthy individuals into singlehood, separation or divorce, while the second debate relates to the extent to which an individual's transitions earlier in the life course in terms of marital status and living arrangements have a differential impact on their health and mortality compared with transitions over shorter time periods. After reviewing the relevant literature, this paper argues that in order to fully account for changes in living arrangements as a determinant of health and mortality transitions, future research will increasingly need to consider a longer perspective and take into account transitions in living arrangements throughout an individual's life course rather than simply focussing at one stage of the life course. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
14 CFR 23.477 - Landing gear arrangement.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Landing gear arrangement. 23.477 Section 23.477 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT....477 Landing gear arrangement. Sections 23.479 through 23.483, or the conditions in appendix C, apply...
14 CFR 23.477 - Landing gear arrangement.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Landing gear arrangement. 23.477 Section 23.477 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT....477 Landing gear arrangement. Sections 23.479 through 23.483, or the conditions in appendix C, apply...
De Moortel, Deborah; Vandenheede, Hadewijch; Vanroelen, Christophe
2014-10-28
There is the tendency in occupational health research of approximating the 'changed world of work' with a sole focus on the intrinsic characteristics of the work task, encompassing the job content and working conditions. This is insufficient to explain the mental health risks associated with contemporary paid work as not only the nature of work tasks have changed but also the terms and conditions of employment. The main aim of the present study is to investigate whether a set of indicators referring to quality of the employment arrangement is associated with the well-being of people in salaried employment. Associations between the quality of contemporary employment arrangements and mental well-being in salaried workers are investigated through a multidimensional set of indicators for employment quality (contract type; income; irregular and/or unsocial working hours; employment status; training; participation; and representation). The second and third aim are to investigate whether the relation between employment quality and mental well-being is different for employed men and women and across different welfare regimes. Cross-sectional data of salaried workers aged 15-65 from 21 EU-member states (n =11,940) were obtained from the 2010 European Social Survey. Linear regression analyses were performed. For both men and women, and irrespective of welfare regime, several sub-dimensions of low employment quality are significantly related with poor mental well-being. Most of the significant relations persist after controlling for intrinsic job characteristics. An insufficient household income and irregular and/or unsocial working hours are the strongest predictors of poor mental well-being. A differential vulnerability of employed men and women to the sub-dimensions of employment quality is found in Traditional family and Southern European welfare regimes. There are significant relations between indicators of low employment quality and poor mental well-being, also when intrinsic characteristics of the work task are controlled. Gender differences are least pronounced in Earner-carer countries.
38. SECTIONS OF ACCESS CORRIDOR, INCLUDES SECTION SHOWING ARRANGEMENT OF ...
38. SECTIONS OF ACCESS CORRIDOR, INCLUDES SECTION SHOWING ARRANGEMENT OF NAVY GUN BARRELS. INEEL DRAWING NUMBER 200-0633-00-287-106454. FLUOR NUMBER 5775-CPP-633-P-59. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID
Cho, Hye Min; Kim, Joo-Yeon; Hwang, Seo Eun; Kim, Jae Chul; Kim, Moo-Young; Lee, Soo Hyoung
2015-07-01
This study aimed to investigate the association between living arrangements and influenza vaccination among elderly South Korean subjects. We used data from the fifth Korean National Health and Nutrition Examination Survey. Participants older than 65 years were included and categorized into 4 groups according to the type of living arrangement as follows: (1) living alone group; (2) living with a spouse group; (3) living with offspring (without spouse) group; and (4) living with other family members group. A total of 1,435 participants were included in this cross-sectional analysis. A lower vaccination rate was observed in the living with offspring (without spouse) group, whereas the living with a spouse group had higher rates of both seasonal and H1N1 influenza vaccination. After adjusting for age, sex, region, education level, income level, and number of comorbidities, the living with offspring (without spouse) group had a higher H1N1 vaccination non-receipt rate than the living alone group (odds ratio, 2.03; 95% confidence interval, 1.08-3.82). Influenza vaccination rates differed according to the type of living arrangement. Particularly, those living with offspring (without spouse) had the lowest H1N1 influenza vaccination rate compared to those with other living arrangements, and this difference was significant. Interventions to improve influenza vaccination coverage should target not only elderly persons who live alone, but also those living with offspring.
Wu, Haiyan; Wu, Shan; Wu, Haibo; Xia, Qiming; Li, Ningxiu
2017-10-19
Changes in living arrangements (from living with, or not living with family) may affect the health-related quality of life (HRQoL). This study aimed to investigate the impact of living arrangement on HRQoL among adolescents migrating from rural to urban schools, and whether social support, in addition to living with a family, had an impact. A cross-sectional survey of 459 school adolescents was carried out in two public schools in Guyuan County, Ningxia Hui Autonomous Region, China in 2015. The survey contained the following questionnaires: a self-designed questionnaire, the 12-item Short Form Health Survey (SF-12), and the Social Support Rating Scale (SSRS). Of the 459 adolescents sampled (aged 15.41 ± 1.07 years with range of 13 to 18), 61.7% were living with family, and 38.3% were not living with family. Those students not living with families had lower Mental Component Scale (MCS) scores as well as less social support overall. Those students, who were not living with families, also reported more chronic health problems and more alcohol consumption compared to those students living with families. Social support was a statistically significant mediating factor on the effect of living arrangements on MCS. Our findings demonstrated that those students, who were not living with families, tended to have more health-related quality of life issues, but social support partially mediated the relationship between living arrangements and health.
Lamontagne, Anthony D; Smith, Peter M; Louie, Amber M; Quinlan, Michael; Shoveller, Jean; Ostry, Aleck S
2009-04-01
We tested the hypothesis that the risk of experiencing unwanted sexual advances at work (UWSA) is greater for precariously-employed workers in comparison to those in permanent or continuing employment. A cross-sectional population-based telephone survey was conducted in Victoria (66% response rate, N=1,101). Employment arrangements were analysed using eight differentiated categories, as well as a four-category collapsed measure to address small cell sizes. Self-report of unwanted sexual advances at work was modelled using multiple logistic regression in relation to employment arrangement, controlling for gender, age, and occupational skill level. Forty-seven respondents reported UWSA in our sample (4.3%), mainly among women (37 of 47). Risk of UWSA was higher for younger respondents, but did not vary significantly by occupational skill level or education. In comparison to Permanent Full-Time, three employment arrangements were strongly associated with UWSA after adjustment for age, gender, and occupational skill level: Casual Full-Time OR = 7.2 (95% Confidence Interval 1.7-30.2); Fixed-Term Contract OR = 11.4 (95% CI 3.4-38.8); and Own-Account Self-Employed OR = 3.8 (95% CI 1.2-11.7). In analyses of females only, the magnitude of these associations was further increased. Respondents employed in precarious arrangements were more likely to report being exposed to UWSA, even after adjustment for age and gender. Greater protections from UWSA are likely needed for precariously employed workers.
Wu, Shan; Wu, Haibo; Xia, Qiming; Li, Ningxiu
2017-01-01
Changes in living arrangements (from living with, or not living with family) may affect the health-related quality of life (HRQoL). This study aimed to investigate the impact of living arrangement on HRQoL among adolescents migrating from rural to urban schools, and whether social support, in addition to living with a family, had an impact. A cross-sectional survey of 459 school adolescents was carried out in two public schools in Guyuan County, Ningxia Hui Autonomous Region, China in 2015. The survey contained the following questionnaires: a self-designed questionnaire, the 12-item Short Form Health Survey (SF-12), and the Social Support Rating Scale (SSRS). Of the 459 adolescents sampled (aged 15.41 ± 1.07 years with range of 13 to 18), 61.7% were living with family, and 38.3% were not living with family. Those students not living with families had lower Mental Component Scale (MCS) scores as well as less social support overall. Those students, who were not living with families, also reported more chronic health problems and more alcohol consumption compared to those students living with families. Social support was a statistically significant mediating factor on the effect of living arrangements on MCS. Our findings demonstrated that those students, who were not living with families, tended to have more health-related quality of life issues, but social support partially mediated the relationship between living arrangements and health. PMID:29048382
Growth, characterization and device development in monocrystalline diamond films
NASA Astrophysics Data System (ADS)
Davis, R. F.; Glass, J. T.; Nemanich, R. J.; Bozeman, S. P.; Sowers, A. T.
1995-06-01
Experimental and theoretical studies concerned with interface interactions of diamond with Si, Ni, and Ni3Si substrates have been conducted. Oriented diamond films deposited on (100) Si were characterized by polar Raman, polar x-ray diffraction (XRD), and cross-sectional high resolution transmission electron microscopy (HRTEM). These sutides showed that the diamond(100)/Si(100) interface adopted the 3:2-match arrangement rather than a 45 deg rotation. Extended Hueckel tight-binding (EHTB) electronic structure calculations for a model system revealed that the interface interaction favors the 3:2-match arrangement. Growth on polycrystalline Ni3Si resulted in oriented diamond particles; under the same growth conditions, graphite was formed on the nickel substrate. Our EHTB electronic structure calculations showed that the (111) and (100) surfaces of Ni3Si have a strong preference for diamond nucleation over graphite nucleation, but this was not the case for the (111) and (100) surfaces of Ni.
Functional Capacity and Self-Esteem of People With Cerebral Palsy.
Espín-Tello, Sandra Martina; Dickinson, Heather Olivia; Bueno-Lozano, Manuel; Jiménez-Bernadó, María Teresa; Caballero-Navarro, Ana Luisa
We assessed whether functional capacity predicts self-esteem in people with cerebral palsy (CP). We conducted a cross-sectional observational study of 108 people with CP, ages 16-65 yr, who were residents of Spain. Self-esteem was captured using the Rosenberg Self-Esteem Scale (RSES), and functional capacity using the Barthel Index (BI). Sociodemographic characteristics were recorded. The relationship between the RSES score and the BI score was analyzed using linear regression. RSES scores increased significantly as BI scores increased (regression coefficient = 0.047, 95% confidence interval [0.017, 0.078], p = .003). People with a higher level of education, active employment, and independent living arrangements tended to have better functional capacity and higher self-esteem. Greater functional capacity predicted higher self-esteem; this effect is probably partly mediated by education, employment, and living arrangements. Copyright © 2018 by the American Occupational Therapy Association, Inc.
Lewis, Richard A.
1980-01-01
A target for a proton beam which is capable of generating neutrons for absorption in a breeding blanket includes a plurality of solid pins formed of a neutron emissive target material disposed parallel to the path of the beam and which are arranged axially in a plurality of layers so that pins in each layer are offset with respect to pins in all other layers, enough layers being used so that each proton in the beam will strike at least one pin with means being provided to cool the pins. For a 300 mA, 1 GeV beam (300 MW), stainless steel pins, 12 inches long and 0.23 inches in diameter are arranged in triangular array in six layers with one sixth of the pins in each layer, the number of pins being such that the entire cross sectional area of the beam is covered by the pins with minimum overlap of pins.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kure, G.; Jenssen, D.N.; Naesje, K.
1984-09-11
An offshore platform structure, particularly intended to be installed in waters where drifting iceberg frequently appear, the platform structure being intended to be founded in a sea bed and comprises a substructure, a superstructure rigidly affixed to the substructure and extending vertically up above the sea level supporting a deck superstructure at its upper end. The horizontal cross-sectional area of the substructure is substantially greater than tath of the superstructure. The substructure rigidly supports a fender structure, the fender structure comprising an outer peripherally arranged wall and an inner cylindrical wall the inner and outer wall being rigidly interconnected bymore » means of a plurality of vertical and/or horizontal partition walls, dividing the fender structure into a plurality of cells or compartlents. The fender structure is arranged in spaced relation with respect to the superstructure.« less
NASA Astrophysics Data System (ADS)
Rahimi, M. H.; Saramad, S.; Tabaian, S. H.; Marashi, S. P.; Zolfaghari, A.; Mohammadalinezhad, M.
2009-10-01
Two-step anodic oxidation of aluminum is generally employed to produce the ordered porous anodized alumina (PAA). Dissolving away (striping) the oxide film after the first anodizing step plays a key role in the final arrangement of nano-pores. In this work, different striping durations between 1 and 6 h were applied to the sample that was initially anodized at a constant voltage of 40 V at 17 °C for 15 h. The striping duration of 3 h was realized as the optimum time for achieving the best ordering degree for the pores. Scanning electron microscopy (SEM) was used during and at the end of the process to examine the cross section and finishing surface of the specimens. Linear-angular fast Fourier transform (LA-FFT), an in-house technique based on MATLAB software, was employed to assess the ordering degree of the anodized samples.
26 CFR 1.414(w)-1 - Permissible withdrawals from eligible automatic contribution arrangements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... contribution arrangements. 1.414(w)-1 Section 1.414(w)-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT... Plans, Etc. § 1.414(w)-1 Permissible withdrawals from eligible automatic contribution arrangements. (a) Overview. Section 414(w) provides rules under which certain employees are permitted to elect to make a...
14 CFR 29.477 - Landing gear arrangement.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Landing gear arrangement. 29.477 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 29.477 Landing gear arrangement. Sections 29.235, 29.479 through 29.485, and 29.493 apply to landing gear with two wheels aft, and...
14 CFR 27.477 - Landing gear arrangement.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Landing gear arrangement. 27.477 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 27.477 Landing gear arrangement. Sections 27.235, 27.479 through 27.485, and 27.493 apply to landing gear with two wheels aft, and...
14 CFR 27.477 - Landing gear arrangement.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Landing gear arrangement. 27.477 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 27.477 Landing gear arrangement. Sections 27.235, 27.479 through 27.485, and 27.493 apply to landing gear with two wheels aft, and...
14 CFR 29.477 - Landing gear arrangement.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Landing gear arrangement. 29.477 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements Ground Loads § 29.477 Landing gear arrangement. Sections 29.235, 29.479 through 29.485, and 29.493 apply to landing gear with two wheels aft, and...
26 CFR 1.7701(l)-3 - Recharacterizing financing arrangements involving fast-pay stock.
Code of Federal Regulations, 2010 CFR
2010-04-01
... involving fast-pay stock. 1.7701(l)-3 Section 1.7701(l)-3 Internal Revenue INTERNAL REVENUE SERVICE....7701(l)-3 Recharacterizing financing arrangements involving fast-pay stock. (a) Purpose and scope. This section is intended to prevent the avoidance of tax by persons participating in fast-pay arrangements (as...
29 CFR 779.228 - Types of arrangements contemplated by exception.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...
29 CFR 779.228 - Types of arrangements contemplated by exception.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...
29 CFR 779.228 - Types of arrangements contemplated by exception.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...
29 CFR 779.228 - Types of arrangements contemplated by exception.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...
29 CFR 779.228 - Types of arrangements contemplated by exception.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.228 Types of arrangements... section 3(s) would not otherwise apply: (a) Any arrangement, whether by agreement, franchise or otherwise...
Nonlinear Deformation of a Piecewise Homogeneous Cylinder Under the Action of Rotation
NASA Astrophysics Data System (ADS)
Akhundov, V. M.; Kostrova, M. M.
2018-05-01
Deformation of a piecewise cylinder under the action of rotation is investigated. The cylinder consists of an elastic matrix with circular fibers of square cross section made of a more rigid elastic material and arranged doubly periodically in the cylinder. Behavior of the cylinder under large displacements and deformations is examined using the equations of a nonlinear elasticity theory for cylinder constituents. The problem posed is solved by the finite-difference method using the method of continuation with respect to the rotational speed of the cylinder.
Xenon (e,2e) triple differential cross sections
NASA Astrophysics Data System (ADS)
Mydlowski, Robert D.; Walters, H. R. J.; Whelan, Colm T.
2015-05-01
Recently there have been published some interesting experiments on the outer shell of xenon performed in doubly symmetric energy sharing arrangements. These experiments present a substantial challenge to theory, not only have we an extremely complex target but the kinematics are such that the key few body effects of exchange, distortion and post collisional electron-electron interaction (pci) and target polarization are likely to be at their strongest and the TDCS will be sensitive to them and their interference. Theoretical results will be presented and compared with experiment
46 CFR 180.150 - Survival craft embarkation arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 180.150 Section... (UNDER 100 GROSS TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.150 Survival craft embarkation arrangements. (a) A launching appliance approved under approval...
Hara, Toru
2014-11-01
IntroductionWe installed the first "orthogonally-arranged" FIB-SEM in 2011. The most characteristic point of this instrument is that the FIB and SEM columns are perpendicularly mounted; this is specially designed to obtain a serial-sectioning dataset more accurately and precisely with higher contrast and higher spatial resolution compare to other current FIB-SEMs [1]. Since the installation in 2011, we have developed the hardware and methodology of the serial-sectioning based on this orthogonal FIB-SEM. In order to develop this technique, we have widely opened this instrument to every researcher of all fields. In the presentation, I would like to introduce some of application results that are obtained by users of this instrument. The characteristic points of the orthogonal systemFigure 1 shows a difference between the standard and the orthogonal FIB-SEM systems: In the standard system, shown in Fig.1(a), optical axes of a FIB and a SEM crosses around 60deg., while in the orthogonal system (Fig.1(b)), they are perpendicular to each other. The standard arrangement (a) is certainly suitable for TEM lamellae preparation etc. because the FIB and the SEM can see the same position simultaneously. However, for a serial-sectioning, it is not to say the best arrangement. One of the reasons is that the sliced plane by the FIB is not perpendicular to the electron beam so that the background contrast is not uniform and observed plane is distorted. On the other hand, in case of the orthogonally-arranged system,(b), these problems are resolved. In addition, spatial resolution can keep high enough even in a low accelerating voltage (e.g. 500V) because a working distance is set very small, 2mm. From these special design, we can obtain the serial-sectioning dataset from rather wide area (∼100um) with high spatial resolution (Max. 2×2×2nm). As this system has many kinds of detectors: SE, ET, Backscatter Electron(Energy-selective), EDS, EBSD, STEM(BF&ADF), with Ar+ ion-gun and a plasma cleaner, many kinds of signals can be obtained simultaneously.jmicro;63/suppl_1/i5-a/DFU077F1F1DFU077F1Fig. 1.Schematic illustration described (a) a standard type arrangement, (b) an orthogonal type arrangement. Recent topics and Future prospectsWe have applied this instrument for wide area of microstructure analysis; Metals and Alloys, Semiconductor devices, Battery electrodes, Minerals, Biomaterials, and so on. In my presentation, I would like to introduce some of our application results and will discuss about future development of the methodology of a FIB-SEM serial sectioning. As the applied research field becomes wider, various requests for the method were arisen. However, most requests can be summarized as follows: observation of larger area, expansion of applicable sample, obtain many kind of information, linkage with other instruments. AcknowledgmentsThe instrument introduced in this work was installed at NIMS by a part of "Low-carbon research network Japan" funded by the MEXT,Japan. © The Author 2014. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Mechanisms of leading edge protrusion in interstitial migration
Wilson, Kerry; Lewalle, Alexandre; Fritzsche, Marco; Thorogate, Richard; Duke, Tom; Charras, Guillaume
2013-01-01
While the molecular and biophysical mechanisms underlying cell protrusion on two-dimensional substrates are well understood, our knowledge of the actin structures driving protrusion in three-dimensional environments is poor, despite relevance to inflammation, development and cancer. Here we report that, during chemotactic migration through microchannels with 5 μm × 5 μm cross-sections, HL60 neutrophil-like cells assemble an actin-rich slab filling the whole channel cross-section at their front. This leading edge comprises two distinct F-actin networks: an adherent network that polymerizes perpendicular to cell-wall interfaces and a ‘free’ network that grows from the free membrane at the cell front. Each network is polymerized by a distinct nucleator and, due to their geometrical arrangement, the networks interact mechanically. On the basis of our experimental data, we propose that, during interstitial migration, medial growth of the adherent network compresses the free network preventing its retrograde movement and enabling new polymerization to be converted into forward protrusion. PMID:24305616
Zhang, Yuan; Punnett, Laura; McEnany, Geoffry Phillips; Gore, Rebecca
2018-01-01
The effect of shift work on nurses’ sleep is well-studied, but there are other challenging aspects of health care work that might also affect the sleep of direct caregivers. This study examined the influence of the long-term care work environment on sleep quantity and quality of nursing assistants. A cross-sectional survey collected data from 650 nursing assistants in 15 long-term care facilities; 46% reported short sleep duration and 23% reported poor sleep quality. A simple additive index of the number of beneficial work features (up to 7) was constructed for analysis with Poisson regression. With each unit increase of beneficial work features, nursing assistants were 7% less likely to report short sleep duration and 17% less likely to report poor sleep quality. These results suggest that effective workplace interventions should address a variety of work stressors, not only work schedule arrangements, in order to improve nursing assistants’ sleep health. PMID:26384714
Light Like a Feather: A Fibrous Natural Composite with a Shape Changing from Round to Square.
Wang, Bin; Meyers, Marc André
2017-03-01
Only seldom are square/rectangular shapes found in nature. One notable exception is the bird feather rachis, which raises the question: why is the proximal base round but the distal end square? Herein, it is uncovered that, given the same area, square cross sections show higher bending rigidity and are superior in maintaining the original shape, whereas circular sections ovalize upon flexing. This circular-to-square shape change increases the ability of the flight feathers to resist flexure while minimizes the weight along the shaft length. The walls are themselves a heterogeneous composite with the fiber arrangements adjusted to the local stress requirements: the dorsal and ventral regions are composed of longitudinal and circumferential fibers, while lateral walls consist of crossed fibers. This natural avian design is ready to be reproduced, and it is anticipated that the knowledge gained from this work will inspire new materials and structures for, e.g., manned/unmanned aerial vehicles.
Light Like a Feather: A Fibrous Natural Composite with a Shape Changing from Round to Square
Wang, Bin
2016-01-01
Only seldom are square/rectangular shapes found in nature. One notable exception is the bird feather rachis, which raises the question: why is the proximal base round but the distal end square? Herein, it is uncovered that, given the same area, square cross sections show higher bending rigidity and are superior in maintaining the original shape, whereas circular sections ovalize upon flexing. This circular‐to‐square shape change increases the ability of the flight feathers to resist flexure while minimizes the weight along the shaft length. The walls are themselves a heterogeneous composite with the fiber arrangements adjusted to the local stress requirements: the dorsal and ventral regions are composed of longitudinal and circumferential fibers, while lateral walls consist of crossed fibers. This natural avian design is ready to be reproduced, and it is anticipated that the knowledge gained from this work will inspire new materials and structures for, e.g., manned/unmanned aerial vehicles. PMID:28331789
25. Top 32/1. Plan of general arrangement of equipment. ...
25. Top 32/1. Plan of general arrangement of equipment. - Wyoming Valley Flood Control System, Woodward Pumping Station, East of Toby Creek crossing by Erie-Lackawanna Railroad, Edwardsville, Luzerne County, PA
46 CFR 188.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section... VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements shall be in accordance with the requirements for...
46 CFR 90.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 90.27-1 Section... VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 90.27-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements must be in accordance with subchapter W (Lifesaving...
46 CFR 195.06-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 195.06-1 Section... VESSELS VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Lifesaving Appliances and Arrangements § 195.06-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements shall be...
46 CFR 70.28-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 3 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 70.28-1 Section... PROVISIONS Lifesaving Appliances and Arrangements § 70.28-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements on passenger vessels must be in accordance with subchapter W...
Determination of Optimum Cross-section for Oran Highway Revetment
NASA Astrophysics Data System (ADS)
Sogut, E.; Velioglu, D.; Guler, I.
2016-12-01
Revetments are shore parallel, sloping coastal structures which are built to provide protection from the negative effects of the sea. The revetment mentioned in this study is located in the City of Oran, Algeria and is currently under construction. This study investigates the determination of the optimum revetment cross section for Oran highway, considering both the hydraulic stability of the revetment and economy. The existence of cliffs in the region and the settlement of the City of Oran created a necessity to re-align Oran highway; therefore, it was shifted towards the Gulf of Oran. Approximately 1 km of the highway is to be constructed on the Mediterranean Sea due to the new alignment. In order to protect the sea side of the road from the adverse effects of the sea, a revetment was designed. The proposed cross section had an armour layer composed of 23 tons of antifer units and regular placement of armour units was recommended. In order to check the hydraulic stability of the proposed section, physical model tests were performed in the laboratory of LEM (Laboratoire d'Etudes Maritimes) in Algeria, using the pre-determined design wave conditions. The physical model tests revealed that the trunk of the revetment was totaly damaged. Accordingly, the proposed section was found insufficient and certain modifications were required. The first modification was made in the arrangement of armour units, changing them from regular to irregular. After testing the new cross section, it was observed that the revetment was vulnerable to breaking wave attack due to the toe geometry and thus the toe of the revetment had to be re-shaped. Therefore, the second option was to reduce the toe elevation. It was observed that even though the revetment trunk was safe, the damage in the toe was not in acceptable limits. The new cross section was found insufficient and as the final option, the weight of the antifer units used in the armour layer was increased, the toe length of the structure was increased and the size of the armour units in the toe was decreased. After the modifications, the new section was tested physically and it was selected as the most optimum option.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-08
... Qualified Retirement Plans Under Sections 401(k) and 401(m) and Guidance on Cash or Deferred Arrangements... cash or deferred arrangements. DATES: Written comments should be received on or before September 6... Cash or Deferred Arrangements. OMB Number: 1545-1669. Regulation/Notice Number: REG-108639-99/Notice...
Miller, Jane E; Nugent, Colleen N; Russell, Louise B
2015-01-01
Objectives To examine which components of medical homes affect time families spend arranging/coordinating health care for their children with special health care needs (CSHCNs) and providing health care at home. Data Sources 2009–2010 National Survey of Children with Special Health Care Needs (NS-CSHCN), a population-based survey of 40,242 CSHCNs. Study Design NS-CSHCN is a cross-sectional, observational study. We used generalized ordered logistic regression, testing for nonproportional odds in the associations between each of five medical home components and time burden, controlling for insurance, child health, and sociodemographics. Data Collection/Extraction Methods Medical home components were collected using Child and Adolescent Health Measurement Initiative definitions. Principal Findings Family-centered care, care coordination, and obtaining needed referrals were associated with 15–32 percent lower odds of time burdens arranging/coordinating and 16–19 percent lower odds providing health care. All five components together were associated with lower odds of time burdens, with greater reductions for higher burdens providing care. Conclusions Three of the five medical home components were associated with lower family time burdens arranging/coordinating and providing health care for children with chronic conditions. If the 55 percent of CSHCNs lacking medical homes had one, the share of families with time burdens arranging care could be reduced by 13 percent. PMID:25100200
NASA Astrophysics Data System (ADS)
Bai, Linge; Widmann, Thomas; Jülicher, Frank; Dahmann, Christian; Breen, David
2013-01-01
Quantifying and visualizing the shape of developing biological tissues provide information about the morphogenetic processes in multicellular organisms. The size and shape of biological tissues depend on the number, size, shape, and arrangement of the constituting cells. To better understand the mechanisms that guide tissues into their final shape, it is important to investigate the cellular arrangement within tissues. Here we present a data processing pipeline to generate 3D volumetric surface models of epithelial tissues, as well as geometric descriptions of the tissues' apical cell cross-sections. The data processing pipeline includes image acquisition, editing, processing and analysis, 2D cell mesh generation, 3D contourbased surface reconstruction, cell mesh projection, followed by geometric calculations and color-based visualization of morphological parameters. In their first utilization we have applied these procedures to construct a 3D volumetric surface model at cellular resolution of the wing imaginal disc of Drosophila melanogaster. The ultimate goal of the reported effort is to produce tools for the creation of detailed 3D geometric models of the individual cells in epithelial tissues. To date, 3D volumetric surface models of the whole wing imaginal disc have been created, and the apicolateral cell boundaries have been identified, allowing for the calculation and visualization of cell parameters, e.g. apical cross-sectional area of cells. The calculation and visualization of morphological parameters show position-dependent patterns of cell shape in the wing imaginal disc. Our procedures should offer a general data processing pipeline for the construction of 3D volumetric surface models of a wide variety of epithelial tissues.
22 CFR 120.35 - Australia Implementing Arrangement.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Australia Implementing Arrangement. 120.35 Section 120.35 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.35 Australia Implementing Arrangement. Australia Implementing Arrangement means the...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-06
... for comment on its impact on small business. Drafting Information The principal authors of these... arrangements under section 401(k) (including a section 401(k) plan that allows designated Roth contributions... section 403(b) arrangement that allows Roth contributions); (4) Qualified tuition programs described in...
ARCHITECTURAL, 777M, PHYSICS ASSEMBLY LABORATORY BUILDING, EQUIPMENT ARRANGEMENT SECTIONS ...
ARCHITECTURAL, 777-M, PHYSICS ASSEMBLY LABORATORY BUILDING, EQUIPMENT ARRANGEMENT SECTIONS B AND C (W157132) - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC
Cross sections of proton-induced nuclear reactions on bismuth and lead up to 100 MeV
NASA Astrophysics Data System (ADS)
Mokhtari Oranj, L.; Jung, N. S.; Bakhtiari, M.; Lee, A.; Lee, H. S.
2017-04-01
Production cross sections of 209Bi(p , x n )207,206,205,204,203Po, 209Bi(p , pxn) 207,206,205,204,203,202Bi, and natPb(p , x n ) 206,205,204,203,202,201Bi reactions were measured to fill the gap in the excitation functions up to 100 MeV as well as to figure out the effects of different nuclear properties on proton-induced reactions including heavy nuclei. The targets were arranged in two different stacks consisting of Bi, Pb, Al, Au foils and Pb plates. The proton beam intensity was determined by the activation analysis method using 27Al(p ,3 p n )24Na, 197Au(p ,p n )196Au, and 197Au(p , p 3 n )194Au monitor reactions in parallel as well as the Gafchromic film dosimetry method. The activities of produced radionuclei in the foils were measured by the HPGe spectroscopy system. Over 40 new cross sections were measured in the investigated energy range. A satisfactory agreement was observed between the present experimental data and the previously published data. Excitation functions of mentioned reactions were calculated by using the theoretical model based on the latest version of the TALYS code and compared to the new data as well as with other data in the literature. Additionally, the effects of various combinations of the nuclear input parameters of different level density models, optical model potentials, and γ-ray strength functions were considered. It was concluded that if certain level density models are used, the calculated cross sections could be comparable to the measured data. Furthermore, the effects of optical model potential and γ-ray strength functions were considerably lower than that of nuclear level densities.
22 CFR 120.36 - United Kingdom Implementing Arrangement.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 22 Foreign Relations 1 2014-04-01 2014-04-01 false United Kingdom Implementing Arrangement. 120.36 Section 120.36 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.36 United Kingdom Implementing Arrangement. United Kingdom Implementing Arrangement means...
22 CFR 120.36 - United Kingdom Implementing Arrangement.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 22 Foreign Relations 1 2012-04-01 2012-04-01 false United Kingdom Implementing Arrangement. 120.36 Section 120.36 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.36 United Kingdom Implementing Arrangement. United Kingdom Implementing Arrangement means...
22 CFR 120.36 - United Kingdom Implementing Arrangement.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 22 Foreign Relations 1 2013-04-01 2013-04-01 false United Kingdom Implementing Arrangement. 120.36 Section 120.36 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.36 United Kingdom Implementing Arrangement. United Kingdom Implementing Arrangement means...
42 CFR 413.241 - Pharmacy arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 2 2012-10-01 2012-10-01 false Pharmacy arrangements. 413.241 Section 413.241... Disease (ESRD) Services and Organ Procurement Costs § 413.241 Pharmacy arrangements. Effective January 1, 2011, an ESRD facility that enters into an arrangement with a pharmacy to furnish renal dialysis...
42 CFR 413.241 - Pharmacy arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 2 2014-10-01 2014-10-01 false Pharmacy arrangements. 413.241 Section 413.241... Disease (ESRD) Services and Organ Procurement Costs § 413.241 Pharmacy arrangements. Effective January 1, 2011, an ESRD facility that enters into an arrangement with a pharmacy to furnish renal dialysis...
42 CFR 413.241 - Pharmacy arrangements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 2 2013-10-01 2013-10-01 false Pharmacy arrangements. 413.241 Section 413.241... Disease (ESRD) Services and Organ Procurement Costs § 413.241 Pharmacy arrangements. Effective January 1, 2011, an ESRD facility that enters into an arrangement with a pharmacy to furnish renal dialysis...
46 CFR 108.199 - Arrangement of sleeping spaces.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Arrangement of sleeping spaces. 108.199 Section 108.199... AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.199 Arrangement of sleeping spaces. To the extent practicable, each occupation group must be berthed together in sleeping spaces...
46 CFR 108.199 - Arrangement of sleeping spaces.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Arrangement of sleeping spaces. 108.199 Section 108.199... AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.199 Arrangement of sleeping spaces. To the extent practicable, each occupation group must be berthed together in sleeping spaces...
46 CFR 108.199 - Arrangement of sleeping spaces.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Arrangement of sleeping spaces. 108.199 Section 108.199... AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.199 Arrangement of sleeping spaces. To the extent practicable, each occupation group must be berthed together in sleeping spaces...
46 CFR 108.199 - Arrangement of sleeping spaces.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Arrangement of sleeping spaces. 108.199 Section 108.199... AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.199 Arrangement of sleeping spaces. To the extent practicable, each occupation group must be berthed together in sleeping spaces...
46 CFR 108.199 - Arrangement of sleeping spaces.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Arrangement of sleeping spaces. 108.199 Section 108.199... AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.199 Arrangement of sleeping spaces. To the extent practicable, each occupation group must be berthed together in sleeping spaces...
Achievement of controlled resistive response of nanogapped palladium film to hydrogen
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhao, M.; Wong, M. H.; Ong, C. W., E-mail: c.w.ong@polyu.edu.hk
2015-07-20
Palladium (Pd) film containing nanogaps of well controlled dimension was fabricated on a Si wafer having a high-aspect-ratio micropillar. The Pd film was arranged to experience hydrogen (H{sub 2})-induced volume expansion. (i) If the nanogap is kept open, its width is narrowed down. A discharge current was generated to give a strong, fast, and repeatable on-off type resistive switching response. (ii) If the nanogap is closed, the cross section of the conduction path varies to give continuous H{sub 2}-concentration dependent resistive response. The influence of stresses and related physical mechanisms are discussed.
Neutron radiative capture cross section of Cu,6563 between 0.4 and 7.5 MeV
NASA Astrophysics Data System (ADS)
Newsome, I.; Bhike, M.; Krishichayan, Tornow, W.
2018-04-01
Natural copper is commonly used as cooling and shielding medium in detector arrangements designed to search for neutrinoless double-β decay. Neutron-induced background reactions on copper could potentially produce signals that are indistinguishable from the signals of interest. The present work focuses on radiative neutron capture experiments on Cu,6563 in the 0.4 to 7.5 MeV neutron energy range. The new data provide evaluations and model calculations with benchmark data needed to extend their applicability in predicting background rates in neutrinoless double-β decay experiments.
Special Issue: Flexible Work Arrangements.
ERIC Educational Resources Information Center
Olmstead, Barney, Ed.
1996-01-01
Section 1 contains five chapters on flexible work arrangements, self-employment, working from home, part-time professionals, job sharing, and temporary employment. Section 2 includes reviews of four books on working flexibly, concluding with a list of 23 additional readings. (SK)
46 CFR 108.525 - Survival craft number and arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft number and arrangement. 108.525 Section... UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a... arrangement of survival craft: (1) Lifeboats with an aggregate capacity to accommodate the total number of...
46 CFR 117.150 - Survival craft embarkation arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Survival craft embarkation arrangements. 117.150 Section... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.150 Survival craft embarkation... apparatus when either— (1) The embarkation station for the survival craft is on a deck more than 4.5 meters...
22 CFR 92.63 - Arrangement of papers.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Arrangement of papers. 92.63 Section 92.63... and Letters Rogatory § 92.63 Arrangement of papers. Unless special instructions to the contrary are received, the various papers comprising the completed record of the depositions should usually be arranged...
22 CFR 92.63 - Arrangement of papers.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Arrangement of papers. 92.63 Section 92.63... and Letters Rogatory § 92.63 Arrangement of papers. Unless special instructions to the contrary are received, the various papers comprising the completed record of the depositions should usually be arranged...
2012-01-01
Background The transition of young people from school to university has many health implications. Food choice at the university can differ because of childhood food consumption patterns, sex and the living arrangements. Food consumption may change especially if students are living away from home. We aimed to assess food consumption patterns among university students from four European countries and how they differ by their living arrangements. Methods We analysed data from a cross-country survey assessing health and health behaviours of students. The sample comprised a total of 2402 first year undergraduate students from one university in each of the countries of Germany, Denmark, Poland and Bulgaria. Food consumption was assessed by means of a food frequency questionnaire with 9 food groups (indicators). Results Students’ food consumption patterns differed across the countries. Frequent consumption of unhealthy items was common. Bulgarian students reported most often frequent consumption of sweets and cakes and snacks (e.g. chips and fast food). Polish students reported the least frequent consumption of vegetables and a low consumption of fruits. Across all countries except Bulgaria, men reported substantially more often frequent consumption of snacks than women. Students living at parental home consumed more fruit, vegetables, and meat than those who resided outside of their family home in all studied countries. There was more variation with regard to cakes and salads with more frequent consumption of cakes among Bulgarian female students and Danish male students and more frequent consumption of salads among Danish female students not living at parental home, compared to students from other countries. Conclusions Nutrition habits of university students differed across countries and by sex. Students living at parental home displayed more healthy nutrition habits, with some exceptions. PMID:22531503
NASA Technical Reports Server (NTRS)
Pirrello, C. J.; Baker, A. H.; Stone, J. E.
1976-01-01
A detailed analytical study was made to investigate the effects of fuselage cross section (circular and elliptical) and the structural arrangement (integral and nonintegral tanks) on aircraft performance. The vehicle was a 200 passenger, liquid hydrogen fueled Mach 6 transport designed to meet a range goal of 9.26 Mn (5000 NM). A variety of trade studies were conducted in the area of configuration arrangement, structural design, and active cooling design in order to maximize the performance of each of three point design aircraft: (1) circular wing-body with nonintegral tanks, (2) circular wing-body with integral tanks and (3) elliptical blended wing-body with integral tanks. Aircraft range and weight were used as the basis for comparison. The resulting design and performance characteristics show that the blended body integral tank aircraft weights the least and has the greatest range capability, however, producibility and maintainability factors favor nonintegral tank concepts.
NASA Astrophysics Data System (ADS)
Tucker, D. A.; Seo, D.-K.; Whangbo, M.-H.; Sivazlian, F. R.; Stoner, B. R.; Bozeman, S. P.; Sowers, A. T.; Nemanich, R. J.; Glass, J. T.
1995-07-01
We carried out experimental and theoretical studies aimed at probing interface interactions of diamond with Si, Ni, and Ni 3Si substrates. Oriented diamond films deposited on (100) silicon were characterized by polar Raman, polar XRD, and cross-sectional HRTEM. These studies show that the diamond-(100)/Si(100) interface does not adopt the 45°-rotation but the 3 : 2-match arrangement. Our extended Hückel tight-binding (EHTB) electronic structure calculations for a model system show that the interface interaction favors the 3 : 2-match arrangement. Growth on polycrystalline Ni 3Si resulted in oriented diamond particles while, under the same growth conditions, largely graphite was formed on the nickel substrate. Our EHTB electronic structure calculations for model systems show that the (111) and (100) surfaces of Ni 3Si have a strong preference for diamond-nucleation over graphite-nucleation, but this is not the case for the (111) and (100) surfaces of Ni.
39. Y&D Drawing 216456 (1943), 'General Arrangement Section JJ', longitudinal ...
39. Y&D Drawing 216456 (1943), 'General Arrangement Section J-J', longitudinal view through pump room and discharge culvert. - Hunters Point Naval Shipyard, Drydock No. 4, East terminus of Palou Avenue, San Francisco, San Francisco County, CA
Workplace bullying a risk for permanent employees.
Keuskamp, Dominic; Ziersch, Anna M; Baum, Fran E; Lamontagne, Anthony D
2012-04-01
We tested the hypothesis that the risk of experiencing workplace bullying was greater for those employed on casual contracts compared to permanent or ongoing employees. A cross-sectional population-based telephone survey was conducted in South Australia in 2009. Employment arrangements were classified by self-report into four categories: permanent, casual, fixed-term and self-employed. Self-report of workplace bullying was modelled using multiple logistic regression in relation to employment arrangement, controlling for sex, age, working hours, years in job, occupational skill level, marital status and a proxy for socioeconomic status. Workplace bullying was reported by 174 respondents (15.2%). Risk of workplace bullying was higher for being in a professional occupation, having a university education and being separated, divorced or widowed, but did not vary significantly by sex, age or job tenure. In adjusted multivariate logistic regression models, casual workers were significantly less likely than workers on permanent or fixed-term contracts to report bullying. Those separated, divorced or widowed had higher odds of reporting bullying than married, de facto or never-married workers. Contrary to expectation, workplace bullying was more often reported by permanent than casual employees. It may represent an exposure pathway not previously linked with the more idealised permanent employment arrangement. A finer understanding of psycho-social hazards across all employment arrangements is needed, with equal attention to the hazards associated with permanent as well as casual employment. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-25
... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [TD 9568] RIN 1545-BI47 Section 482; Methods To Determine Taxable Income in Connection With a Cost Sharing Arrangement; Correction... 22, 2011 (76 FR 80082), Relating to section 482 and methods to determine taxable income in connection...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-25
... 482; Methods To Determine Taxable Income in Connection With a Cost Sharing Arrangement; Correction... 22, 2011 (76 FR 80082), Relating to section 482 and methods to determine taxable income in connection.... * * * * * (b) * * * (2) * * * (i) Methods. Sections 1.482-2 through 1.482-7 and 1.482-9 provide specific...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-14
... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [TD 9568] RIN 1545-BI47 Section 482; Methods To Determine Taxable Income in Connection With a Cost Sharing Arrangement; Correction... Federal Register on Wednesday, January 25, 2012 (77 FR 3606) relating to section 482 and methods to...
Tunable acoustic absorbers with periodical micro-perforations having varying pore shapes
NASA Astrophysics Data System (ADS)
Ren, Shuwei; Liu, Xuewei; Gong, Junqing; Tang, Yufan; Xin, Fengxian; Huang, Lixi; Lu, Tian Jian
2017-11-01
Circular pores with sub-millimeter diameters have been widely used to construct micro-perforated panels (MPPs), the acoustical performance of which can be predicted well using the Maa theory (MAA D.-Y., J. Acoust. Soc. Am., 104 (1998) 2861). We present a tunable MPP absorber with periodically arranged cylindrical pores, with their cross-sectional shapes systematically altered around the circle while maintaining their cross-sectional areas unchanged. Numerical analyses based on the viscous-thermal coupled acoustical equations are utilized to investigate the tunable acoustic performance of the proposed absorbers and to reveal the underlying physical mechanisms. We demonstrate that pore morphology significantly affects the sound absorbption of MPPs by modifying the velocity field (and hence viscous dissipation) in the pores. Pore shapes featured as meso-scale circular pores accompanied with micro-scale bulges along the boundaries can lead to perfect sound absorption at relatively low frequencies. This work not only enriches the classical Maa theory on MPPs having circular perforations, but it also opens a new avenue for designing subwavelength acoustic metamaterials of superior sound absorption in target frequency ranges.
The development and testing of a novel cross axis wind turbine
NASA Astrophysics Data System (ADS)
Chong, W. T.; Muzammil, W. K.; Gwani, M.; Wong, K. H.; Fazlizan, A.; Wang, C. T.; Poh, S. C.
2016-06-01
A novel cross axis wind turbine (CAWT) which comprises of a cross axis blades arrangement was presented and investigated experimentally. The CAWT is a new type of wind turbine that extracts wind energy from airflow coming from the horizontal and vertical directions. The wind turbine consists of three vertical blades and six horizontal blades arranged in a cross axis orientation. Hubs in the middle of the CAWT link the horizontal and vertical blades through connectors to form the CAWT. The study used a 45° deflector to guide the oncoming airflow upward (vertical wind direction). The results from the study showed that the CAWT produced significant improvements in power output and rotational speed performance compared to a conventional straight-bladed vertical axis wind turbine (VAWT).
41 CFR 301-50.2 - How must I arrange my travel?
Code of Federal Regulations, 2010 CFR
2010-07-01
... travel? 301-50.2 Section 301-50.2 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ARRANGING FOR TRAVEL SERVICES, PAYING TRAVEL EXPENSES, AND CLAIMING REIMBURSEMENT 50-ARRANGING FOR TRAVEL SERVICES § 301-50.2 How must I arrange my travel? You must...
33 CFR 149.315 - What embarkation, launching, and recovery arrangements must rescue boats meet?
Code of Federal Regulations, 2013 CFR
2013-07-01
... recovery arrangements must rescue boats meet? 149.315 Section 149.315 Navigation and Navigable Waters COAST..., launching, and recovery arrangements must rescue boats meet? (a) Each rescue boat must be capable of being... boat embarkation and launching arrangement must permit the rescue boat to be boarded and launched in...
Determination of Optimum Cross-section for Oran Highway Revetment
NASA Astrophysics Data System (ADS)
Velioglu, Deniz; Sogut, Erdinc; Guler, Isikhan
2017-04-01
Revetments are shore parallel, sloping coastal structures which are built to provide protection from the negative effects of the sea. The revetment mentioned in this study is located in the City of Oran, Algeria and is currently under construction. This study investigates the determination of the optimum revetment cross section for Oran highway, considering both the hydraulic stability of the revetment and economy. The existence of cliffs in the region and the settlement of the City of Oran created a necessity to re-align Oran highway; therefore, it was shifted towards the Gulf of Oran. Approximately 1 km of the highway is to be constructed on the Mediterranean Sea due to the new alignment. In order to protect the sea side of the road from the adverse effects of the sea, a revetment was designed. The proposed cross section had an armour layer composed of 23 tons of antifer units and regular placement of armour units was recommended. In order to check the hydraulic stability of the proposed section, physical model tests were performed in the laboratory of LEM (Laboratoire d'Etudes Maritimes) in Algeria, using the pre-determined design wave conditions. The physical model tests revealed that the trunk of the revetment was totaly damaged. Accordingly, the proposed section was found insufficient and certain modifications were required. The first modification was made in the arrangement of armour units, changing them from regular to irregular. After testing the new cross section, it was observed that the revetment was vulnerable to breaking wave attack due to the toe geometry and thus the toe of the revetment had to be re-shaped. Therefore, the second option was to reduce the toe elevation. It was observed that even though the revetment trunk was safe, the damage in the toe was not in acceptable limits. The new cross section was found insufficient and as the final option, the weight of the antifer units used in the armour layer was increased, the toe length of the structure was increased and the size of the armour units in the toe was decreased. After the modifications, the new section was tested physically and it was selected as the most optimum option. Acknowledgements: Yuksel Proje Uluslararasi A.S. is acknowledged for its contributon to this study.
48 CFR 48.104 - Sharing arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Sharing arrangements. 48.104 Section 48.104 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT VALUE ENGINEERING Policies and Procedures 48.104 Sharing arrangements. ...
Catalog of Resources on International Understanding.
ERIC Educational Resources Information Center
Myers, Donald W., Ed.
Arranged in eight sections, this catalog provides elementary and secondary educators with resources on global education. General resources in section 1 are arranged under organizations and projects, language and area studies centers, youth exchange organizations, miscellaneous, and bibliographies of books, journals, and classroom activities.…
78 FR 58609 - Proposed Collection; Comment Request for Regulation Project
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-24
... Designated Roth Contributions to Cash or Deferred Arrangements Under Section 401(k). DATES: Written comments... . SUPPLEMENTARY INFORMATION: Title: Designated Roth Contributions to Cash or Deferred Arrangements Under Section... regulations provide guidance concerning the requirements for designated Roth contributions to qualified cash...
Yadav, Uday Narayan; Tamang, Man Kumar; Paudel, Grish; Kafle, Bharat; Mehta, Suresh; Chandra Sekaran, Varalakshmi; Gruiskens, Jeroen R J H
2018-01-01
Elder mistreatment is a well-recognized public health issue with complex underlying factors. The current study hypothesized that there is no effect of any of the following factors on any type of elder mistreatment: ethnicity, age group, education status, gender, living arrangement, concentration problems, medication for any disease, income level of caregiver, use of alcohol and tobacco products, and dependence on family or caregivers for daily activities. We conducted a cross-sectional study of 339 elders adults aged 60 or above residing in a rural part of eastern Nepal between August and November 2016. Multi-stage cluster sampling was adopted to select the study subjects. Information was collected using semi-structured questionnaires administered to elderly people by a designated interviewer. Factors associated with elder mistreatment were analyzed using logistic regression. Our findings revealed that 61.7% of 60+-year-olds experienced some form of mistreatment (physical 2.4%, psychological 22.4%, caregiver neglect 57.5%, financial 12.1% and stranger-inflicted 8.3%). Elder mistreatment was associated with the following characteristics of elders: dependent on family for daily living activities, illiterate, experiencing concentration problems, residing in a living arrangement with their son(s)/daughter(s)-in-law, taking regular medications, belonging to the Dalit community according to the Hindu traditional caste system, and residing with a caregiver having a monthly family income of less than NRs. 20,000 (193USD). Our data show that elder mistreatment is prevalent in a rural community of Nepal. Addressing the lower socio-economic or socio-cultural classes of caregivers and elders via community-focused development programs might have significant implications for improving the well-being of elders.
The role of the extrinsic thoracic limb muscles in equine locomotion.
Payne, R C; Veenman, P; Wilson, A M
2005-02-01
Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.
The role of the extrinsic thoracic limb muscles in equine locomotion.
Payne, R C; Veenman, P; Wilson, A M
2004-12-01
Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 +/- 17 mm) fascicles, arranged at about 45 degrees to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb.
The role of the extrinsic thoracic limb muscles in equine locomotion
Payne, RC; Veenman, P; Wilson, AM
2005-01-01
Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 ± 17 mm) fascicles, arranged at about 45° to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb. PMID:15730484
The role of the extrinsic thoracic limb muscles in equine locomotion
Payne, R C; Veenman, P; Wilson, A M
2004-01-01
Muscles have two major roles in locomotion: to generate force and to absorb/generate power (do work). Economical force generation is achieved by short-fibred pennate muscle while the maximum power output of a muscle is architecture independent. In this study we tested the hypothesis that there is an anatomical and structural separation between the force-generating anti-gravity muscles and the propulsive (limb/trunk moving) muscles of the equine forelimb. Muscle mass and fascicle length measurements were made on the thoracic limb extrinsic muscles of six fresh horse cadavers. Physiological cross-sectional area and maximum isometric force were then estimated. Maximum power was estimated from muscle volume and published contraction velocity data. The majority of extrinsic forelimb muscles were large with long fascicles arranged in parallel to the long axis of the muscle. Muscles arranged in this way are optimised for doing work. The architecture of serratus ventralis thoracis (SVT) was unique. It had short (48 ± 17 mm) fascicles, arranged at about 45° to the long axis of the muscle, which would suggest a force-generating, anti-gravity role. The muscle belly of SVT was sandwiched between two broad, thick sheets of aponeurosis. Hence, SVT could make a significant contribution to the overall elastic properties of the thoracic limb. PMID:15610395
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-22
... Service 26 CFR Parts 1, 301, and 602 Section 482: Methods To Determine Taxable Income in Connection With a... 26 CFR Parts 1, 301, and 602 [TD 9568] RIN 1545-BI47 Section 482: Methods To Determine Taxable Income... regulations regarding methods to determine taxable income in connection with a cost sharing arrangement under...
Code of Federal Regulations, 2010 CFR
2010-07-01
... EDUCATION CHILDREN WITH DISABILITIES WITHIN THE SECTION 6 SCHOOL ARRANGEMENTS § 80.4 Policy. It is DoD... educational instruction from the Section 6 School Arrangements shall be provided a free, appropriate education... (inclusive) and their families are entitled to receive early intervention services under this part, provided...
Code of Federal Regulations, 2011 CFR
2011-07-01
... EDUCATION CHILDREN WITH DISABILITIES WITHIN THE SECTION 6 SCHOOL ARRANGEMENTS § 80.4 Policy. It is DoD... educational instruction from the Section 6 School Arrangements shall be provided a free, appropriate education... (inclusive) and their families are entitled to receive early intervention services under this part, provided...
Spaceport news index: January 1990 - December 1994
NASA Technical Reports Server (NTRS)
1995-01-01
This index is intended to serve as a ready reference tool for the names, places, and events that comprise the history of John F. Kennedy Space Center. The arrangement is alphabetical by subject with entries arranged alphabetically by title. To facilitate use, cross references have been provided.
48 CFR 28.304 - Risk-pooling arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Risk-pooling arrangements. 28.304 Section 28.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS BONDS AND INSURANCE Insurance 28.304 Risk-pooling arrangements. Agencies may...
ERIC Educational Resources Information Center
Kari, James, Ed.
This dictionary of Ahtna, a dialect of the Athabaskan language family, is the first to integrate all morphemes into a single alphabetically arranged section of main entries, with verbs arranged according to a theory of Ahtna (and Athabascan) verb theme categories. An introductory section details dictionary format conventions used, presents a brief…
NASA Astrophysics Data System (ADS)
Kumar, Deepak; Maiti, Moumita
2017-06-01
Background: The heavy-ion induced reactions on intermediate mass targets are complex in nature, even at the low energies. To understand those nuclear reaction phenomena in detail, more experimental studies are required in a wide range of energies. Purpose: Investigation of heavy-ion reactions by measuring production cross sections of the residues produced in the 11B-induced reactions on 89Y and 93Nb at low energies, near and above the barrier, and to check the effectiveness of the different nuclear models to explain them. Further, aim is also to optimize the production parameters of neutron deficient medically relevant 97Ru and Rhm101 radioisotopes produced in those reactions, respectively. Method: The 11B beam was allowed to impinge on 89Y and 93Nb foils supported by an aluminum (Al) catcher foil, arranged in a stack, in 27.5-58.7 and 30.6-62.3 MeV energy range, respectively. The off-line γ -ray spectrometry was carried out after the end of bombardment to measure the activity of the radionuclides produced in each foil and cross sections were calculated. Measured cross-sectional data were analyzed in terms of compound and precompound model calculations. Results: The measured cross sections of Ru,9597, 96,95,94Tc, Mom93, Ym90 radionuclides produced in the 11B+89Y reaction, and 101,100,99Pd, 101m,100,99mRh, 97Ru produced in the 11B+93Nb reaction showed good agreement with the model calculations based on the Hauser-Feshbach formulation and exciton model. Unlike theoretical estimation, consistent production of Ym90 was observed in the 11B+89Y reaction. Substantial pre-equilibrium contribution was noticed in the 3 n reaction channel in both reactions. Conclusions: Theoretical estimations confirmed that major production yields are mostly contributed by the compound reaction process. Pre-equilibrium emissions contributed at the high energy tail of the 3 n channel for both reactions. Moreover, an indirect signature of a direct reaction influence was also observed in the Ym90 production.
Compact valve actuation mechanism
NASA Technical Reports Server (NTRS)
Brogdon, James William (Inventor); Gill, David Keith (Inventor)
2000-01-01
A valve actuation device. The device may include a free floating valve bridge movably supported within a cavity in the engine housing. The bridge may be provided with a cavity and an orifice arrangement for pumping gases entrained with lubricating fluid toward the piston stems as the bridge reciprocates back and forth. The device may also include a rocker arm that has a U-shaped cross-sectional shape for receiving at least a portion of the valve bridge, valve stem valve spring and spring retainer therein. The rocker arm may be provided with lubrication passages for directing lubrication to the point wherein it is pivotally affixed to the engine housing.
NASA Technical Reports Server (NTRS)
Cambridge, Vivien J.; Magee, Ronald G.
1993-01-01
The method of silhouettes proceeds from the premise that the 3D location and shape of an arbitrary object can be approximated via the cross section of a series of conical volumes whose focal points are arranged at sites surrounding the object; the projection of each conical volume onto a picture plane at each focal point is identical to a projection of the outline of the object onto that picture plane. Attention is presently given to the use of the silhouettes method for gas plume dispersion monitoring through the 3D reconstruction of plumes from imagery acquired at strategically located stations in the plumes' path.
NASA Astrophysics Data System (ADS)
Rao, D. V.; Cesareo, R.; Brunetti, A.; Gigante, G. E.; Takeda, T.; Itai, Y.; Akatsuka, T.
2002-10-01
A new approach is developed to estimate the geometrical factors, solid angle approximation and geometrical efficiency for a system with experimental arrangements using X-ray tube and secondary target as an excitation source in order to produce the nearly monoenergetic Kα radiation to excite the sample. The variation of the solid angle is studied by changing the radius and length of the collimators towards and away from the source and sample. From these values the variation of the total solid angle and geometrical efficiency is deduced and the optimum value is used for the experimental work.
14 CFR 25.477 - Landing gear arrangement.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Landing gear arrangement. 25.477 Section 25.477 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Ground Loads § 25.477 Landing gear arrangement...
14 CFR 25.477 - Landing gear arrangement.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Landing gear arrangement. 25.477 Section 25.477 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure Ground Loads § 25.477 Landing gear arrangement...
48 CFR 2301.105-2 - Arrangement of regulations.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Arrangement of regulations. 2301.105-2 Section 2301.105-2 Federal Acquisition Regulations System SOCIAL SECURITY ADMINISTRATION GENERAL SOCIAL SECURITY ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 2301.105-2 Arrangement...
48 CFR 2501.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Arrangement of regulations. 2501.104-2 Section 2501.104-2 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 2501.104-2 Arrangement of...
29 CFR 2520.104-21 - Limited exemption for certain group insurance arrangements.
Code of Federal Regulations, 2010 CFR
2010-07-01
.... 2520.104-21 Section 2520.104-21 Labor Regulations Relating to Labor (Continued) EMPLOYEE BENEFITS SECURITY ADMINISTRATION, DEPARTMENT OF LABOR REPORTING AND DISCLOSURE UNDER THE EMPLOYEE RETIREMENT INCOME... arrangements. (a) Scope. Under the authority of section 104(a)(3) of the Act, the administrator of any employee...
38. Y&D Drawing 216455 (1942), 'Dry Dock 4 General Arrangement ...
38. Y&D Drawing 216455 (1942), 'Dry Dock 4 General Arrangement Sections F-F, G-G, H-H, I-I'; sectional views through pump room, flooding and dewatering chambers. - Hunters Point Naval Shipyard, Drydock No. 4, East terminus of Palou Avenue, San Francisco, San Francisco County, CA
Employment arrangement, job stress, and health-related quality of life ☆
Ray, Tapas K.; Kenigsberg, Tat’Yana A.; Pana-Cryan, Regina
2017-01-01
Objective We aimed to understand the characteristics of U.S. workers in non-standard employment arrangements, and to assess associations between job stress and Health-related Quality of Life (HRQL) by employment arrangement. Background As employers struggle to stay in business under increasing economic pressures, they may rely more on non-standard employment arrangements, thereby increasing the pool of contingent workers. Worker exposure to job stress may vary by employment arrangement. Excessive exposure to stressors at work is considered to be a potential health hazard, and may adversely affect health and HRQL. Methods We used the Quality of Worklife (QWL) module which supplemented the General Social Survey (GSS) in 2002, 2006, 2010, and 2014. GSS is a biannual, nationally representative cross-sectional survey of U.S. households that yields a representative sample of the civilian, non-institutionalized, English-speaking, U.S. adult population. The QWL module assesses an array of psychosocial working conditions and quality of work life topics among GSS respondents. We used pooled QWL responses from 2002 to 2014 by only those who reported being employed at the time of the survey. After adjusting for sampling probabilities, including subsampling for non-respondents and correcting for the number of adults in the household, 6005 respondents were included in our analyses. We grouped respondents according to their employment arrangement, including: (i) independent contractors (contractor), (ii) on call workers (on call), (iii) workers paid by a temporary agency (temporary), (iv) workers who work for a contractor (under contract), or (v) workers in standard employment arrangements (standard). Respondents were further grouped into those who were stressed and those who were not stressed at work. Descriptive population prevalence rates were calculated by employment arrangement for select demographic and organizational characteristics, psychosocial working conditions, work-family balance, and health and well-being outcomes. We also assessed the effect of employment arrangement on job stress, and whether job stress was associated with the number of reported unhealthy days and days with activity limitations. These two health and well-being outcomes capture aspects of worker HRQL. Results Our results underscored the importance of employment arrangement in understanding job stress and associated worker health and well-being outcomes. Between 2002 and 2014, the prevalence of workers in non-standard employment arrangements increased from 19% to 21%; however, the observed trend did not monotonically increase during that period. Compared with workers in standard arrangements, independent contractors and on call workers were significantly less likely to report experiencing job stress. For workers in standard arrangements and for contractors, we observed significant association between perceived job stress and reported unhealthy days. We observed a similar association for reported days with activity limitations, for workers in standard and temporary arrangements. Conclusion The major contribution of our study was to highlight the differences in job stress and HRQL by employment arrangement. Our results demonstrated the importance of studying each of these employment arrangements separately and in depth. Furthermore, employment arrangement was an important predictor of job stress, and compared with non-stressed workers, stressed workers across all employment arrangements reported more unhealthy days and more days with activity limitations. PMID:29097848
Employment arrangement, job stress, and health-related quality of life.
Ray, Tapas K; Kenigsberg, Tat'Yana A; Pana-Cryan, Regina
2017-12-01
We aimed to understand the characteristics of U.S. workers in non-standard employment arrangements, and to assess associations between job stress and Health-related Quality of Life (HRQL) by employment arrangement. As employers struggle to stay in business under increasing economic pressures, they may rely more on non-standard employment arrangements, thereby increasing the pool of contingent workers. Worker exposure to job stress may vary by employment arrangement. Excessive exposure to stressors at work is considered to be a potential health hazard, and may adversely affect health and HRQL. We used the Quality of Worklife (QWL) module which supplemented the General Social Survey (GSS) in 2002, 2006, 2010, and 2014. GSS is a biannual, nationally representative cross-sectional survey of U.S. households that yields a representative sample of the civilian, non-institutionalized, English-speaking, U.S. adult population. The QWL module assesses an array of psychosocial working conditions and quality of work life topics among GSS respondents. We used pooled QWL responses from 2002 to 2014 by only those who reported being employed at the time of the survey. After adjusting for sampling probabilities, including subsampling for non-respondents and correcting for the number of adults in the household, 6005 respondents were included in our analyses. We grouped respondents according to their employment arrangement, including: (i) independent contractors (contractor), (ii) on call workers (on call), (iii) workers paid by a temporary agency (temporary), (iv) workers who work for a contractor (under contract), or (v) workers in standard employment arrangements (standard). Respondents were further grouped into those who were stressed and those who were not stressed at work. Descriptive population prevalence rates were calculated by employment arrangement for select demographic and organizational characteristics, psychosocial working conditions, work-family balance, and health and well-being outcomes. We also assessed the effect of employment arrangement on job stress, and whether job stress was associated with the number of reported unhealthy days and days with activity limitations. These two health and well-being outcomes capture aspects of worker HRQL. Our results underscored the importance of employment arrangement in understanding job stress and associated worker health and well-being outcomes. Between 2002 and 2014, the prevalence of workers in non-standard employment arrangements increased from 19% to 21%; however, the observed trend did not monotonically increase during that period. Compared with workers in standard arrangements, independent contractors and on call workers were significantly less likely to report experiencing job stress. For workers in standard arrangements and for contractors, we observed significant association between perceived job stress and reported unhealthy days. We observed a similar association for reported days with activity limitations, for workers in standard and temporary arrangements. The major contribution of our study was to highlight the differences in job stress and HRQL by employment arrangement. Our results demonstrated the importance of studying each of these employment arrangements separately and in depth. Furthermore, employment arrangement was an important predictor of job stress, and compared with non-stressed workers, stressed workers across all employment arrangements reported more unhealthy days and more days with activity limitations.
Morphology and three-dimensional reconstruction of the digestive system of Periplaneta americana.
Ma, Hui; Liu, Zhi-Gang; Bao, Ying; Ran, Pi-Xin; Zhong, Nan-Shan
2009-01-01
A three-dimensional (3-D) model of the digestive system of Periplaneta americana was built for the first time based on hematoxylin and eosin (H&E) staining, the study of multiple cross-sections of the larval cockroach, and 3-D reconstruction technology. The digestive system of P. americana includes the foregut, midgut, and hindgut and takes up most of the celom. The foregut comprises almost one half of the digestive system (43.57%). The midgut, the critical region for digestion and absorption, has the second highest volume ratio (35.21%). The hindgut, with the lowest volume ratio (21.22%), includes the ileum, colon, and rectum. After the ileal valve is the colon. The 3-D model presented in this paper provides a stereoscopic view for studying the adjacent relationship and arrangement of different gut sections of P. americana.
Active ultrasonic cross-correlation flowmeters for mixed-phase pipe flows
NASA Astrophysics Data System (ADS)
Sheen, S. H.; Raptis, A. C.
Two ultrasonic flowmeters which employ the active cross-correlation technique and use a simple clamp-on transducer arrangement are discussed. The flowmeter for solid/liquid flows was tested over a wide range of coal concentration in water and oil. The measured velocity based on the peak position of the cross-correlation function is consistently higher by about 15% than the average velocity measured by flow diversion. The origin of the difference results mainly from the flow velocity profiles and the transit-time probability distribution. The flowmeter that can measure particle velocity in a solid/gas flow requires acoustic decoupling arrangement between two sensing stations. The measured velocity is mainly associated with the particles near the wall. Performance of both flowmeters is presented.
48 CFR 1501.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 1501.105-1 Section 1501.105-1 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY GENERAL GENERAL Purpose, Authority, Issuance 1501.105-1 Publication and code arrangement. The...
Technological Innovation in Grade Crossing Protective Systems
DOT National Transportation Integrated Search
1971-06-01
The constraints on innovative grade crossing protective systems are delineated and guidelines for development indicated. Inventory data has been arranged to permit an estimate of the classes of systems needed, the allowable costs, and contribution of...
Automated detection of follow-up appointments using text mining of discharge records.
Ruud, Kari L; Johnson, Matthew G; Liesinger, Juliette T; Grafft, Carrie A; Naessens, James M
2010-06-01
To determine whether text mining can accurately detect specific follow-up appointment criteria in free-text hospital discharge records. Cross-sectional study. Mayo Clinic Rochester hospitals. Inpatients discharged from general medicine services in 2006 (n = 6481). Textual hospital dismissal summaries were manually reviewed to determine whether the records contained specific follow-up appointment arrangement elements: date, time and either physician or location for an appointment. The data set was evaluated for the same criteria using SAS Text Miner software. The two assessments were compared to determine the accuracy of text mining for detecting records containing follow-up appointment arrangements. Agreement of text-mined appointment findings with gold standard (manual abstraction) including sensitivity, specificity, positive predictive and negative predictive values (PPV and NPV). About 55.2% (3576) of discharge records contained all criteria for follow-up appointment arrangements according to the manual review, 3.2% (113) of which were missed through text mining. Text mining incorrectly identified 3.7% (107) follow-up appointments that were not considered valid through manual review. Therefore, the text mining analysis concurred with the manual review in 96.6% of the appointment findings. Overall sensitivity and specificity were 96.8 and 96.3%, respectively; and PPV and NPV were 97.0 and 96.1%, respectively. of individual appointment criteria resulted in accuracy rates of 93.5% for date, 97.4% for time, 97.5% for physician and 82.9% for location. Text mining of unstructured hospital dismissal summaries can accurately detect documentation of follow-up appointment arrangement elements, thus saving considerable resources for performance assessment and quality-related research.
Completed Research in Health, Physical Education and Recreation. Volume 20.
ERIC Educational Resources Information Center
Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.
This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1977. It is arranged in three parts. The index provides cross references for all listings in the second two parts, arranged under subject headings in alphabetical order. A bibliography gives a listing of published research,…
46 CFR 188.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section 188.27-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and...
46 CFR 188.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section 188.27-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and...
46 CFR 188.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section 188.27-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and...
46 CFR 188.27-1 - Lifesaving appliances and arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section 188.27-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and...
14 CFR 1215.112 - User/NASA contractual arrangement.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false User/NASA contractual arrangement. 1215.112 Section 1215.112 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA... User/NASA contractual arrangement. No service shall be provided without an approved agreement. [77 FR...
48 CFR 2001.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 2001.104-1 Section 2001.104-1 Federal Acquisition Regulations System NUCLEAR REGULATORY... 2001.104-1 Publication and code arrangement. (a) The NRCAR and its subsequent changes are: (1...
78 FR 70100 - Proposed Collection; Comment Request for Regulation Project
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-22
..., Recharacterizing Financing Arrangements Involving Fast-Pay Stock. DATES: Written comments should be received on or... INFORMATION: Title: Recharacterizing Financing Arrangements Involving Fast-Pay Stock. OMB Number: 1545-1642. Regulation Project Number: T.D. 8853. Abstract: Section 1.7701(l)-3 recharacterizes fast-pay arrangements...
15 CFR 743.1 - Wassenaar Arrangement.
Code of Federal Regulations, 2014 CFR
2014-01-01
... must be kept in accordance with part 762 of the EAR. This section does not require reports for... the Wassenaar Arrangement Munitions List that are subject to the EAR (i.e., “600 series” ECCNs), see... paragraph (a) of this section: For purposes of part 743, the term “you” has the same meaning as the term...
75 FR 10018 - Proposed Collection; Comment Request for Notice 98-1 and REG-108639-99
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-04
... (TD 1969), Retirement Plans; Cash or Deferred Arrangements Under Section 401(k) and Matching... Plans; Cash or Deferred Arrangements Under Section 401(k) and Matching Contributions or Employee...) estimates of capital or start-up costs and costs of operation, maintenance, and purchase of services to...
Load transfer in the stiffener-to-skin joints of a pressurized fuselage
NASA Technical Reports Server (NTRS)
Johnson, Eric R.; Rastogi, Naveen
1995-01-01
Structural analyses are developed to determine the linear elastic and the geometrically nonlinear elastic response of an internally pressurized, orthogonally stiffened, composite material cylindrical shell. The configuration is a long circular cylindrical shell stiffened on the inside by a regular arrangement of identical stringers and identical rings. Periodicity permits the analysis of a unit cell model consisting of a portion of the shell wall centered over one stringer-ring joint. The stringer-ring-shell joint is modeled in an idealized manner; the stiffeners are mathematically permitted to pass through one another without contact, but do interact indirectly through their mutual contact with the shell at the joint. Discrete beams models of the stiffeners include a stringer with a symmetrical cross section and a ring with either a symmetrical or an asymmetrical open section. Mathematical formulations presented for the linear response include the effect of transverse shear deformations and the effect of warping of the ring's cross section due to torsion. These effects are important when the ring has an asymmetrical cross section because the loss of symmetry in the problem results in torsion and out-of-plane bending of the ring, and a concomitant rotation of the joint at the stiffener intersection about the circumferential axis. Data from a composite material crown panel typical of a large transport fuselage structure are used for two numerical examples. Although the inclusion of geometric nonlinearity reduces the 'pillowing' of the shell, it is found that bending is localized to a narrow region near the stiffener. Including warping deformation of the ring into the analysis changes the sense of the joint rotation. Transverse shear deformation models result in increased joint flexibility.
7 CFR 28.906 - Sampling arrangements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 2 2011-01-01 2011-01-01 false Sampling arrangements. 28.906 Section 28.906... Producers Sampling § 28.906 Sampling arrangements. (a) Cotton must be sampled by a gin or warehouse that... an authorized representative may direct that sampling be performed by employees of the Department of...
7 CFR 28.906 - Sampling arrangements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 2 2010-01-01 2010-01-01 false Sampling arrangements. 28.906 Section 28.906... Producers Sampling § 28.906 Sampling arrangements. (a) Cotton must be sampled by a gin or warehouse that... an authorized representative may direct that sampling be performed by employees of the Department of...
46 CFR 108.525 - Survival craft number and arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Survival craft number and arrangement. 108.525 Section 108.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a...
46 CFR 108.525 - Survival craft number and arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Survival craft number and arrangement. 108.525 Section 108.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a...
46 CFR 108.525 - Survival craft number and arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Survival craft number and arrangement. 108.525 Section 108.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.525 Survival craft number and arrangement. (a...
15 CFR 40.5 - Other cooperative arrangements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Other cooperative arrangements. 40.5 Section 40.5 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE... STATISTICS § 40.5 Other cooperative arrangements. The Bureau of the Census also undertakes the training of...
48 CFR 2501.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Publication and code arrangement. 2501.104-1 Section 2501.104-1 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... code arrangement. (a) The NSFAR is published in the daily issues of the Federal Register and, in...
48 CFR 2501.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Publication and code arrangement. 2501.104-1 Section 2501.104-1 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... code arrangement. (a) The NSFAR is published in the daily issues of the Federal Register and, in...
48 CFR 2501.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Publication and code arrangement. 2501.104-1 Section 2501.104-1 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... code arrangement. (a) The NSFAR is published in the daily issues of the Federal Register and, in...
48 CFR 3001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Publication and code arrangement. 3001.105-1 Section 3001.105-1 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND... Purpose, Authority, Issuance 3001.105-1 Publication and code arrangement. (a) The HSAR is published in: (1...
48 CFR 1801.105-2 - Arrangement of regulations. (NASA supplements paragraph (b))
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Arrangement of regulations. (NASA supplements paragraph (b)) 1801.105-2 Section 1801.105-2 Federal Acquisition Regulations System..., Authority, Issuance 1801.105-2 Arrangement of regulations. (NASA supplements paragraph (b)) (b)(1)(A...
48 CFR 1801.105-2 - Arrangement of regulations. (NASA supplements paragraph (b))
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Arrangement of regulations. (NASA supplements paragraph (b)) 1801.105-2 Section 1801.105-2 Federal Acquisition Regulations System..., Authority, Issuance 1801.105-2 Arrangement of regulations. (NASA supplements paragraph (b)) (b)(1)(A...
48 CFR 1801.105-2 - Arrangement of regulations. (NASA supplements paragraph (b))
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Arrangement of regulations. (NASA supplements paragraph (b)) 1801.105-2 Section 1801.105-2 Federal Acquisition Regulations System..., Authority, Issuance 1801.105-2 Arrangement of regulations. (NASA supplements paragraph (b)) (b)(1)(A...
48 CFR 1801.105-2 - Arrangement of regulations. (NASA supplements paragraph (b))
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Arrangement of regulations. (NASA supplements paragraph (b)) 1801.105-2 Section 1801.105-2 Federal Acquisition Regulations System..., Authority, Issuance 1801.105-2 Arrangement of regulations. (NASA supplements paragraph (b)) (b)(1)(A...
48 CFR 1801.105-2 - Arrangement of regulations. (NASA supplements paragraph (b))
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Arrangement of regulations. (NASA supplements paragraph (b)) 1801.105-2 Section 1801.105-2 Federal Acquisition Regulations System..., Authority, Issuance 1801.105-2 Arrangement of regulations. (NASA supplements paragraph (b)) (b)(1)(A...
29 CFR 779.230 - Franchise and other arrangements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 29 Labor 3 2011-07-01 2011-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...
29 CFR 779.230 - Franchise and other arrangements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 29 Labor 3 2014-07-01 2014-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...
29 CFR 779.230 - Franchise and other arrangements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 29 Labor 3 2013-07-01 2013-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...
29 CFR 779.230 - Franchise and other arrangements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 29 Labor 3 2012-07-01 2012-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...
29 CFR 779.230 - Franchise and other arrangements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false Franchise and other arrangements. 779.230 Section 779.230... Coverage Leased Departments, Franchise and Other Business Arrangements § 779.230 Franchise and other.... The quotation in § 779.229 from the Senate Report shows that Congress recognized that some franchise...
29 CFR 780.126 - Contract arrangements for raising poultry.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false Contract arrangements for raising poultry. 780.126 Section... General Scope of Agriculture Raising of Livestock, Bees, Fur-Bearing Animals, Or Poultry § 780.126 Contract arrangements for raising poultry. Feed dealers and processors sometimes enter into contractual...
75 FR 54226 - Proposed Collection; Comment Request for Notice 98-52 and REG-108639-99
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-03
... comments concerning Notice 98-52, Cash or Deferred Arrangements; Nondiscrimination, and existing notice of proposed rulemaking, REG-108639-99, Retirement Plans; Cash or Deferred Arrangements Under Section 401(k...: Title: Cash or Deferred Arrangements; Nondiscrimination (Notice 98- 52), Retirement Plans; Cash or...
48 CFR 1001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Publication and code arrangement. 1001.105-1 Section 1001.105-1 Federal Acquisition Regulations System DEPARTMENT OF THE TREASURY....105-1 Publication and code arrangement. The DTAR and its subsequent changes will be published in the...
48 CFR 1601.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 1601.104-1 Section 1601.104-1 Federal Acquisition Regulations System OFFICE OF PERSONNEL... SYSTEM Purpose, Authority, Issuance 1601.104-1 Publication and code arrangement. (a) The FEHBAR and its...
48 CFR 1301.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Publication and code arrangement. 1301.105-1 Section 1301.105-1 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Publication and code arrangement. (a) The CAR is published in the Federal Register, in cumulative form in the...
48 CFR 2101.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 2101.104-1 Section 2101.104-1 Federal Acquisition Regulations System OFFICE OF PERSONNEL... REGULATIONS SYSTEM Purpose, Authority, Issuance 2101.104-1 Publication and code arrangement. (a) The LIFAR and...
48 CFR 1001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Publication and code arrangement. 1001.105-1 Section 1001.105-1 Federal Acquisition Regulations System DEPARTMENT OF THE TREASURY....105-1 Publication and code arrangement. The DTAR and its subsequent changes will be published in the...
48 CFR 3001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Publication and code arrangement. 3001.105-1 Section 3001.105-1 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND... Purpose, Authority, Issuance 3001.105-1 Publication and code arrangement. (a) The HSAR is published in: (1...
48 CFR 3001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Publication and code arrangement. 3001.105-1 Section 3001.105-1 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND... Purpose, Authority, Issuance 3001.105-1 Publication and code arrangement. (a) The HSAR is published in: (1...
48 CFR 1901.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 1901.104-1 Section 1901.104-1 Federal Acquisition Regulations System BROADCASTING BOARD OF..., Issuance 1901.104-1 Publication and code arrangement. (a) The IAAR is published in the Federal Register and...
48 CFR 3001.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Publication and code arrangement. 3001.105-1 Section 3001.105-1 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND... Purpose, Authority, Issuance 3001.105-1 Publication and code arrangement. (a) The HSAR is published in: (1...
48 CFR 501.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Publication and code arrangement. 501.105-1 Section 501.105-1 Federal Acquisition Regulations System GENERAL SERVICES... 501.105-1 Publication and code arrangement. The GSAR is published in the following sources: (a) Daily...
48 CFR 1301.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Publication and code arrangement. 1301.105-1 Section 1301.105-1 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Publication and code arrangement. (a) The CAR is published in the Federal Register, in cumulative form in the...
48 CFR 501.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Publication and code arrangement. 501.105-1 Section 501.105-1 Federal Acquisition Regulations System GENERAL SERVICES... 501.105-1 Publication and code arrangement. The GSAR is published in the following sources: (a) Daily...
48 CFR 501.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Publication and code arrangement. 501.105-1 Section 501.105-1 Federal Acquisition Regulations System GENERAL SERVICES... 501.105-1 Publication and code arrangement. The GSAR is published in the following sources: (a) Daily...
Living arrangements among older people: an overview of trends in Europe and the USA.
Tomassini, Cecilia; Glaser, Karen; Wolf, Douglas A; Broese van Groenou, Marjolein I; Grundy, Emily
2004-01-01
This article compares the trends in living arrangements of older people in several European countries and in the United States. Trends and cross-country variability in several factors that could account for these cross-national differences, including marital status, fertility, labour force participation and attitudes, are also examined. In most countries the proportion of older people living alone increased substantially between 1970 and 1990. However the increase in living alone stabilised or even declined between 1990 and 2000 in most of the countries analysed indicating a possible reversal in the trend. Increases in proportions of older women who are married and reductions in the proportions childless may partially explain this. Considerable variability in both trends and levels of older people's living arrangements was seen especially between north-western and southern European countries. These variations mirrored contrasts in attitudes towards residential care and parent-child coresidence between the countries.
[Determinants of social participation and social inclusion of people with severe mental illness].
Schützwohl, Matthias
2017-03-01
Individuals with mental disorders are known to be socially excluded so that improving social inclusion has become a major goal of healthcare provision. However, empirical research on specific determinants of social inclusion is rather scarce. A cross-sectional survey of adults with a severe mental illness (n =70) was conducted using a measure of participation and social inclusion for individuals with a chronic mental disorder (F-INK). Univariate and multivariate regression analyses were conducted to identify determinants of social participation and social inclusion. Social participation increased with the number of friends and was, independently thereof, higher in adults living independently than in adults living in supported housing arrangements. The level of social inclusion was higher in those cohabitating and increased with duration of illness. Findings on social participation indicate the need for a re-organization of community-based supported housing arrangements, and, with respect to existing settings, an amendment of present conditions. To promote social inclusion, measures to prime a feeling of ongoing social affiliation should be taken during the first years of psychiatric illness.
NASA Astrophysics Data System (ADS)
Wierzchowski, W.; Moore, M.; Makepeace, A. P. W.; Yacoot, A.
1991-10-01
A 4 x 4 x 1.5 cu mm cuboctahedral diamond and two 0.7 mm thick slabs cut from a truncated octahedral diamond grown by the reconstitution technique were studied in different double-crystal arrangements with both conventional and synchrotron X-ray sources. The back-reflection double crystal topographs of large polished 001-plane-oriented faces intersecting different growth sectors, together with cathodoluminescence patterns, allowed identification of these sectors. A double-crystal arrangement, employing the -3 2 5 quartz reflection matching the symmetrical 004 diamond reflection in CuK(alpha 1) radiation, was used for measurement of lattice parameter differences with an accuracy of one and a half parts per million. The simultaneous investigation by means of Lang projection and section topography provided complementary information about the crystallographic defects and internal structures of growth sectors. Observation of the cuboctahedral diamond with a filter of peak transmittance at 430 nm revealed a 'Maltese cross' growth feature in the central (001) growth sector, which also affected the birefringence pattern. However, this feature only very slightly affected the double-crystal topographs.
NASA Astrophysics Data System (ADS)
Fraldi, M.; Perrella, G.; Ciervo, M.; Bosia, F.; Pugno, N. M.
2017-09-01
Very recently, a Weibull-based probabilistic strategy has been successfully applied to bundles of wires to determine their overall stress-strain behaviour, also capturing previously unpredicted nonlinear and post-elastic features of hierarchical strands. This approach is based on the so-called "Equal Load Sharing (ELS)" hypothesis by virtue of which, when a wire breaks, the load acting on the strand is homogeneously redistributed among the surviving wires. Despite the overall effectiveness of the method, some discrepancies between theoretical predictions and in silico Finite Element-based simulations or experimental findings might arise when more complex structures are analysed, e.g. helically arranged bundles. To overcome these limitations, an enhanced hybrid approach is proposed in which the probability of rupture is combined with a deterministic mechanical model of a strand constituted by helically-arranged and hierarchically-organized wires. The analytical model is validated comparing its predictions with both Finite Element simulations and experimental tests. The results show that generalized stress-strain responses - incorporating tension/torsion coupling - are naturally found and, once one or more elements break, the competition between geometry and mechanics of the strand microstructure, i.e. the different cross sections and helical angles of the wires in the different hierarchical levels of the strand, determines the no longer homogeneous stress redistribution among the surviving wires whose fate is hence governed by a "Hierarchical Load Sharing" criterion.
Wind Tunnel Investigation of Fuselage Stability in Yaw with Various Arrangements of Fins
NASA Technical Reports Server (NTRS)
Hoggard, H Page, Jr
1940-01-01
An investigation was made in the 7-by-10 foot wind tunnel to determine the effects of dorsal-type fins and various arrangements of fins on the aerodynamic characteristics of a streamline circular fuselage. Comparative plots of the aerodynamic characteristics of the fuselage alone and the fuselage with various fin arrangements are given to show their effects on coefficients of yawing moment, drag, and lateral force. Results are also given for one case in which a rear fin on a circular fuselage was faired with modeling clay to obtain a fuselage shape with the same side elevation as the fuselage with the unfaired fin but with an elliptical cross section over the rearward portion of the fuselage. The results indicated that fin area to the rear of the center of gravity of the fuselage was beneficial in reducing the magnitude of the unstable yawing moments at large angles of yaw; whereas, fin area forward of the center of gravity was harmful. The dorsal-type fin was more effective for increasing the yawing stability of the fuselage than was a smoothly faired rearward portion with the same side elevation as the fuselage with the unfaired dorsal type fin. The minimum drag coefficient and the slope of the curve of yawing-moment coefficient of the fuselage at zero yaw were unaffected by the addition of the fins, within the experimental accuracy of the tests.
Factors associated with bed and room sharing in Chinese school-aged children.
Li, S; Jin, X; Yan, C; Wu, S; Jiang, F; Shen, X
2009-03-01
Co-sleeping (bed or room sharing) has potential implications for children's development. Previous studies showed that co-sleeping was more prevalent in non-Western countries than in Western countries, which demonstrated that co-sleeping was marked with ethnic and socio-cultural background characteristics. The purpose of this study was to survey the prevalence of bed and room sharing and to examine related factors among school-aged children in an Asian country - China. A cross-sectional questionnaire survey was conducted in 10 districts of Shanghai, China from November to December 2005. A total of 4108 elementary school children, 49.2% boys and 50.8% girls with a mean age of 8.79 years, participated. Parent-administered questionnaires were used to collect information about children's sleeping arrangements and socio-demographic characteristics. The prevalence of routine bed sharing, room sharing and sleeping alone in Chinese school-aged children was 21.0%, 19.1% and 47.7%, respectively. Bed and room sharing didn't show significant gender difference but gradually decreased with increasing age. Multivariate logistic regression identified those factors associated with bed and room sharing: younger age, large family, children without their own bedroom and parents' approval of a co-sleeping arrangement. Co-sleeping arrangement was a common practice in Chinese school-aged children. Associated factors were characterized by intrinsic socio-cultural values and socio-economic status in China.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-14
... 482; Methods To Determine Taxable Income in Connection With a Cost Sharing Arrangement; Correction... on Thursday, December 22, 2011 (76 FR 80082), relating to section 482 and methods to determine... revisions read as follows: Sec. 1.482-7 Methods to determine taxable income in connection with a cost...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-26
... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 Section 482: Methods To Determine Taxable Income in Connection With a Cost Sharing Arrangement CFR Correction 0 In Title 26 of the...) * * * (1) * * * See Sec. 1.482-8 for examples of the application of the best method rule...
26 CFR 1.7701(l)-3 - Recharacterizing financing arrangements involving fast-pay stock.
Code of Federal Regulations, 2012 CFR
2012-04-01
... involving fast-pay stock. 1.7701(l)-3 Section 1.7701(l)-3 Internal Revenue INTERNAL REVENUE SERVICE... Valuations § 1.7701(l)-3 Recharacterizing financing arrangements involving fast-pay stock. (a) Purpose and scope. This section is intended to prevent the avoidance of tax by persons participating in fast-pay...
26 CFR 1.7701(l)-3 - Recharacterizing financing arrangements involving fast-pay stock.
Code of Federal Regulations, 2013 CFR
2013-04-01
... involving fast-pay stock. 1.7701(l)-3 Section 1.7701(l)-3 Internal Revenue INTERNAL REVENUE SERVICE... Valuations § 1.7701(l)-3 Recharacterizing financing arrangements involving fast-pay stock. (a) Purpose and scope. This section is intended to prevent the avoidance of tax by persons participating in fast-pay...
26 CFR 1.7701(l)-3 - Recharacterizing financing arrangements involving fast-pay stock.
Code of Federal Regulations, 2011 CFR
2011-04-01
... involving fast-pay stock. 1.7701(l)-3 Section 1.7701(l)-3 Internal Revenue INTERNAL REVENUE SERVICE... Valuations § 1.7701(l)-3 Recharacterizing financing arrangements involving fast-pay stock. (a) Purpose and scope. This section is intended to prevent the avoidance of tax by persons participating in fast-pay...
26 CFR 1.7701(l)-3 - Recharacterizing financing arrangements involving fast-pay stock.
Code of Federal Regulations, 2014 CFR
2014-04-01
... involving fast-pay stock. 1.7701(l)-3 Section 1.7701(l)-3 Internal Revenue INTERNAL REVENUE SERVICE... Valuations § 1.7701(l)-3 Recharacterizing financing arrangements involving fast-pay stock. (a) Purpose and scope. This section is intended to prevent the avoidance of tax by persons participating in fast-pay...
Structure of collagen-glycosaminoglycan matrix and the influence to its integrity and stability.
Bi, Yuying; Patra, Prabir; Faezipour, Miad
2014-01-01
Glycosaminoglycan (GAG) is a chain-like disaccharide that is linked to polypeptide core to connect two collagen fibrils/fibers and provide the intermolecular force in Collagen-GAG matrix (C-G matrix). Thus, the distribution of GAG in C-G matrix contributes to the integrity and mechanical properties of the matrix and related tissue. This paper analyzes the transverse isotropic distribution of GAG in C-G matrix. The angle of GAGs related to collagen fibrils is used as parameters to qualify the GAGs isotropic characteristic in both 3D and 2D rendering. Statistical results included that over one third of GAGs were perpendicular directed to collagen fibril with symmetrical distribution for both 3D matrix and 2D plane cross through collagen fibrils. The three factors tested in this paper: collagen radius, collagen distribution, and GAGs density, were not statistically significant for the strength of Collagen-GAG matrix in 3D rendering. However in 2D rendering, a significant factor found was the radius of collagen in matrix for the GAGs directed to orthogonal plane of Collagen-GAG matrix. Between two cross-section selected from Collagen-GAG matrix model, the plane cross through collagen fibrils was symmetrically distributed but the total percentage of perpendicular directed GAG was deducted by decreasing collagen radius. There were some symmetry features of GAGs angle distribution in selected 2D plane that passed through space between collagen fibrils, but most models showed multiple peaks in GAGs angle distribution. With less GAGs directed to perpendicular of collagen fibril, strength in collagen cross-section weakened. Collagen distribution was also a factor that influences GAGs angle distribution in 2D rendering. True hexagonal collagen packaging is reported in this paper to have less strength at collagen cross-section compared to quasi-hexagonal collagen arrangement. In this work focus is on GAGs matrix within the collagen and its relevance to anisotropy.
1980-01-01
purpose of exporting cash crops but which generally did not cross colonial frontiers, and preferential trading systems and banking arrange- ments which...divide through cooperation in specific functional organisations--the Cocoa Producers Alliance (founded 1962), the African Groundnut Council (1964), the...arrangements essentially allowed EEC exports privileged access to Associates’ markets vis-a-vis the exports of all other countries, including the neighboring
NASA Astrophysics Data System (ADS)
Jansson, K.; Gustavsson, C.; Pomp, S.; Prokofiev, A. V.; Scian, G.; Tarrío, D.
2014-05-01
The Medley detector setup is planned to be moved to and used at the new neutron facility NFS where measurements of light-ion production and fission cross-sections are planned at 1-40 MeV. Medley has eight detector telescopes providing ΔE-ΔE-E data, each consisting of two silicon detectors and a CsI(Tl) detector at the back. The telescope setup can be rotated and arranged to cover any angle. Medley has previously been used in many measurements at The Svedberg Laboratory (TSL) in Uppsala mainly with a quasi-mono-energetic neutron beam at 96 and 175 MeV. To be able to do measurements at NFS, which will have a white neutron beam, Medley needs to detect the reaction products with a high timing resolution providing the ToF of the primary neutron. In this paper we discuss the design of the Medley upgrade along with simulations of the setup. We explore the use of Parallel Plate Avalanche Counters (PPACs) which work very well for detecting fission fragments but require more consideration for detecting deeply penetrating particles.
NASA Astrophysics Data System (ADS)
Singh, R.; Olson, M. S.
2011-12-01
Low permeability regions sandwiched between high permeability regions such as clay lenses are difficult to treat using conventional treatment methods. Trace concentrations of contaminants such as non-aqueous phase liquids (NAPLs) remain trapped in these regions and over the time diffuse out into surrounding water thereby acting as a long term source of groundwater contamination. Bacterial chemotaxis (directed migration toward a contaminant source), may be helpful in enhancing bioremediation of such contaminated sites. This study is focused on simulating a two-dimensional dual-permeability groundwater contamination scenario using microfluidic devices and evaluating transverse chemotactic migration of bacteria from high to low permeability regions. A novel bi-layer polydimethylsiloxane (PDMS) microfluidic device was fabricated using photolithography and soft lithography techniques to simulate contamination of a dual- permeability region due to leakage from an underground storage tank into a low permeability region. This device consists of a porous channel through which a bacterial suspension (Escherchia Coli HCB33) is flown and another channel for injecting contaminant/chemo-attractant (DL-aspertic acid) into the porous channel. The pore arrangement in the porous channel contains a 2-D low permeability region surrounded by high permeability regions on both sides. Experiments were performed under chemotactic and non-chemotactic (replacing attractant with buffer solution in the non porous channel) conditions. Images were captured in transverse pore throats at cross-sections 4.9, 9.8, and 19.6 mm downstream from the attractant injection point and bacteria were enumerated in the middle of each pore throat. Bacterial chemotaxis was quantified in terms of the change in relative bacterial counts in each pore throat at cross-sections 9.8 and 19.6 mm with respect to counts at the cross-section at 4.9 mm. Under non-chemotactic conditions, relative bacterial count was observed to decrease at 9.8 mm and 19.6 mm cross-sections in low permeability regions due to dilution with the injectate from the non-porous channel (Figure 1). However, relative bacterial counts increased in the low permeability region at both downstream cross-sections under chemotactic conditions. A large increase in relative bacterial count in the pore throats just outside the low permeability region was also observed at both cross-sections (Figure 1). The bacterial chemotactic response was observed to decrease linearly with increasing Darcy velocity and at flow rate 0.220 mm/s the chemotactic effect was offset by the advective flow in the porous channel.
46 CFR 34.25-5 - Capacity and arrangement-T/ALL.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 1 2011-10-01 2011-10-01 false Capacity and arrangement-T/ALL. 34.25-5 Section 34.25-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS FIREFIGHTING EQUIPMENT Water Spray Extinguishing Systems, Details § 34.25-5 Capacity and arrangement—T/ALL. (a) The capacity and arrangement shall...
46 CFR 34.25-5 - Capacity and arrangement-T/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 1 2010-10-01 2010-10-01 false Capacity and arrangement-T/ALL. 34.25-5 Section 34.25-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS FIREFIGHTING EQUIPMENT Water Spray Extinguishing Systems, Details § 34.25-5 Capacity and arrangement—T/ALL. (a) The capacity and arrangement shall...
26 CFR 1.401(k)-1 - Certain cash or deferred arrangements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... cash or deferred arrangements. A plan, other than a profit-sharing, stock bonus, pre-ERISA money... plan includes a cash or deferred arrangement. A profit-sharing, stock bonus, pre-ERISA money purchase... by the employee for purposes of section 451. (v) Certain one-time elections not treated as cash or...
26 CFR 1.401(k)-1 - Certain cash or deferred arrangements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... include cash or deferred arrangements. A plan, other than a profit-sharing, stock bonus, pre-ERISA money... plan includes a cash or deferred arrangement. A profit-sharing, stock bonus, pre-ERISA money purchase... by the employee for purposes of section 451. (v) Certain one-time elections not treated as cash or...
26 CFR 1.401(k)-1 - Certain cash or deferred arrangements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... include cash or deferred arrangements. A plan, other than a profit-sharing, stock bonus, pre-ERISA money... plan includes a cash or deferred arrangement. A profit-sharing, stock bonus, pre-ERISA money purchase... by the employee for purposes of section 451. (v) Certain one-time elections not treated as cash or...
26 CFR 1.401(k)-1 - Certain cash or deferred arrangements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... include cash or deferred arrangements. A plan, other than a profit-sharing, stock bonus, pre-ERISA money... plan includes a cash or deferred arrangement. A profit-sharing, stock bonus, pre-ERISA money purchase... by the employee for purposes of section 451. (v) Certain one-time elections not treated as cash or...
26 CFR 1.61-22 - Taxation of split-dollar life insurance arrangements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Taxation of split-dollar life insurance..., and Taxable Income § 1.61-22 Taxation of split-dollar life insurance arrangements. (a) Scope—(1) In general. This section provides rules for the taxation of a split-dollar life insurance arrangement for...
14 CFR § 1215.112 - User/NASA contractual arrangement.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false User/NASA contractual arrangement. § 1215.112 Section § 1215.112 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING... § 1215.112 User/NASA contractual arrangement. No service shall be provided without an approved agreement...
Code of Federal Regulations, 2010 CFR
2010-07-01
... establishment under certain franchise and other arrangements. 779.226 Section 779.226 Labor Regulations Relating... OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Leased Departments, Franchise... establishment under certain franchise and other arrangements. While certain franchise and other arrangements may...
Code of Federal Regulations, 2013 CFR
2013-07-01
... establishment under certain franchise and other arrangements. 779.226 Section 779.226 Labor Regulations Relating... OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Leased Departments, Franchise... establishment under certain franchise and other arrangements. While certain franchise and other arrangements may...
Code of Federal Regulations, 2012 CFR
2012-07-01
... establishment under certain franchise and other arrangements. 779.226 Section 779.226 Labor Regulations Relating... OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Leased Departments, Franchise... establishment under certain franchise and other arrangements. While certain franchise and other arrangements may...
Code of Federal Regulations, 2011 CFR
2011-07-01
... establishment under certain franchise and other arrangements. 779.226 Section 779.226 Labor Regulations Relating... OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Leased Departments, Franchise... establishment under certain franchise and other arrangements. While certain franchise and other arrangements may...
Code of Federal Regulations, 2014 CFR
2014-07-01
... establishment under certain franchise and other arrangements. 779.226 Section 779.226 Labor Regulations Relating... OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Leased Departments, Franchise... establishment under certain franchise and other arrangements. While certain franchise and other arrangements may...
26 CFR 1.61-22 - Taxation of split-dollar life insurance arrangements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 26 Internal Revenue 2 2013-04-01 2013-04-01 false Taxation of split-dollar life insurance..., and Taxable Income § 1.61-22 Taxation of split-dollar life insurance arrangements. (a) Scope—(1) In general. This section provides rules for the taxation of a split-dollar life insurance arrangement for...
26 CFR 1.61-22 - Taxation of split-dollar life insurance arrangements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 26 Internal Revenue 2 2012-04-01 2012-04-01 false Taxation of split-dollar life insurance..., and Taxable Income § 1.61-22 Taxation of split-dollar life insurance arrangements. (a) Scope—(1) In general. This section provides rules for the taxation of a split-dollar life insurance arrangement for...
Kurien, T; Boyce, R W G; Paish, E C; Ronan, J; Maddison, J; Rakha, E A; Green, A R; Ellis, I O
2005-01-01
Aims: To establish a three dimensional reconstruction of an invasive breast carcinoma using basic laboratory equipment to evaluate and characterise the spatial arrangement of the parenchymal cells of the breast. Methods: One hundred and twenty eight sequential 4 μm sections (20 μm apart) of the tumour were stained immunohistochemically with an epithelial specific marker (AE1/AE3) or tumour specific marker (c-erbB-2) to reconstruct two different three dimensional images of the normal and malignant parenchymal cells. Sections were digitally imaged using a microscope, scanner, and digital camera linked to a conventional personal computer. Accurate alignment of the digitalised images was carried out using a semiautomatic graphical method of manual interaction, using the cross correlation coefficient as a goodness of fit measure, and an automatic search algorithm using the Fibonacci search algorithm for automatic alignment. The volume was reconstructed using maximum, minimum point projection and “back to front” opacity blending. Results: The quality of the reconstructed images was distinct and perfect, providing a comprehensive and explicit view of the normal and malignant parenchymal tissues of the breast that is not possible by viewing two dimensional histological sections. Specifically, this approach showed the spatial arrangement of the tumour cells and their relation to the surrounding tissues at a high resolution. Conclusion: This simple and reproducible approach enables the spread and infiltration of invasive carcinoma to be understood and could also be used to analyse the spatial relation between atypical hyperplastic and malignant in situ lesions of the breast. PMID:16126880
Shaikh, B T; Mobeen, N; Azam, S I; Rabbani, F
2008-01-01
A cross-sectional study of patient satisfaction with care was conducted over a period of 1 year from March 2004 to March 2005 in a secondary-level hospital in a peri-urban area of Karachi, Pakistan. Using the SERVQUAL tool and exit interviews, data were collected quarterly from a total of 1533 patients. Results sharing and capacity-building workshops were arranged during the 4 phases of the survey to sensitize the staff of the hospital to work towards improving patient satisfaction. The level of satisfaction of the patients with the outpatient health services provided showed a gradual increase from 34.4% to 82.0% over the 1-year period.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bell, F.R.
1963-02-01
A nuclear reactor core composed of a number of identical elements of solid moderator material fitted together was designed. Each moderator element is apertured to provide channels for fuel and coolant. The elements have an external shape which permits them to be stacked in layers with similar elements, with the surfaces of adjacent elements fitting and in contact with each other. The cross section of the element is of a general hexagonal shape with identations and protrusions, so that the elements can be fitted together. The described core should not be liable to fracture under transverse loading. Specific arrangements ofmore » moderator elements and fuel and coolant apertures are described. (M.P.G.)« less
Otoconial formation in the fetal rat
NASA Technical Reports Server (NTRS)
Salamat, M. S.; Ross, M. D.; Peacor, D. R.
1980-01-01
Otoconial formation in the fetal rat is examined by scanning and transmission electron microscopy, and by X-ray elemental analysis. The primitive otoconia appear highly organic, but are trigonal in cross section, indicating that they already possess a three-fold axis of symmetry and a complement of calcite. These otoconia develop into spindle-shaped and, subsequently, dumbbell-shaped units. Transmission electron microscopy of dumbbell-shaped otoconia not exposed to fluids during embedment showed that calcite deposits mimicked the arrangement of the organic material. X-ray elemental analysis demonstrated that calcium was present in lower quantities in the central core than peripherally. It is concluded that organic material is essential to otoconial seeding and directs otoconial growth.
Balanced double-loop mesoscopic interferometer based on Josephson proximity nanojunctions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ronzani, Alberto, E-mail: alberto.ronzani@nano.cnr.it; Altimiras, Carles; Giazotto, Francesco
We report on the fabrication and characterization of a two-terminal mesoscopic interferometer based on three V/Cu/V Josephson junctions having nanoscale cross-section. The junctions have been arranged in a double-ring geometry realized by metallic thin film deposition through a suspended mask defined by electron beam lithography. Although a significant amount of asymmetry between the critical current of each junction is observed, we show that the interferometer is able to suppress the supercurrent to a level lower than 6 parts per thousand, being here limited by measurement resolution. The present nano-device is suitable for low-temperature magnetometric and gradiometric measurements over the micrometricmore » scale.« less
Funnel for localizing biological cell placement and arrangement
DOE Office of Scientific and Technical Information (OSTI.GOV)
Soscia, David; Benett, William J.; Mukerjee, Erik V.
2018-03-06
The present disclosure relates to a funnel apparatus for channeling cells onto a plurality of distinct, closely spaced regions of a seeding surface. The funnel apparatus has a body portion having an upper surface and a lower surface. The body portion forms a plurality of flow paths, at least one of which is shaped to have a decreasing cross-sectional area from the upper surface to the lower surface. The flow paths are formed at the lower surface to enable cells deposited into the flow paths at the upper surface of the funnel apparatus to be channeled into a plurality ofmore » distinct, closely spaced regions on the seeding surface positioned adjacent the lower surface.« less
NASA Astrophysics Data System (ADS)
Chen, Chen; He, Ruiyun; Tan, Yang; Wang, Biao; Akhmadaliev, Shavkat; Zhou, Shengqiang; de Aldana, Javier R. Vázquez; Hu, Lili; Chen, Feng
2016-01-01
This work reports on the fabrication of ridge waveguides in Er3+/Yb3+ co-doped phosphate glass by the combination of femtosecond laser ablation and following swift carbon ion irradiation. The guiding properties of waveguides have been investigated at 633 and 1064 nm through end face coupling arrangement. The refractive index profile on the cross section of the waveguide has been constructed. The propagation losses can be reduced considerably after annealing treatment. Under the optical pump laser at 980 nm, the upconversion emission of both green and red fluorescence has been realized through the ridge waveguide structures.
DOE Office of Scientific and Technical Information (OSTI.GOV)
WANDERER,P.; ET AL.
2003-06-15
Superconducting combined function magnets will be utilized for the 50GeV-750kW proton beam line for the J-PARC neutrino experiment and an R and D program has been launched at KEK. The magnet is designed to provide a combined function with a dipole field of 2.59 T and a quadrupole field of 18.7 T/m in a coil aperture of 173.4 mm. A single layer coil is proposed to reduce the fabrication cost and the coil arrangement in the 2-D cross-section results in left-right asymmetry. This paper reports the design study of the magnet.
FY07 LDRD Final Report Neutron Capture Cross-Section Measurements at DANCE
DOE Office of Scientific and Technical Information (OSTI.GOV)
Parker, W; Agvaanluvsan, U; Wilk, P
2008-02-08
We have measured neutron capture cross sections intended to address defense science problems including mix and the Quantification of Margins and Uncertainties (QMU), and provide details about statistical decay of excited nuclei. A major part of this project included developing the ability to produce radioactive targets. The cross-section measurements were made using the white neutron source at the Los Alamos Neutron Science Center, the detector array called DANCE (The Detector for Advanced Neutron Capture Experiments) and targets important for astrophysics and stockpile stewardship. DANCE is at the leading edge of neutron capture physics and represents a major leap forward inmore » capability. The detector array was recently built with LDRD money. Our measurements are a significant part of the early results from the new experimental DANCE facility. Neutron capture reactions are important for basic nuclear science, including astrophysics and the statistics of the {gamma}-ray cascades, and for applied science, including stockpile science and technology. We were most interested in neutron capture with neutron energies in the range between 1 eV and a few hundred keV, with targets important to basic science, and the s-process in particular. Of particular interest were neutron capture cross-section measurements of rare isotopes, especially radioactive isotopes. A strong collaboration between universities and Los Alamos due to the Academic Alliance was in place at the start of our project. Our project gave Livermore leverage in focusing on Livermore interests. The Lawrence Livermore Laboratory did not have a resident expert in cross-section measurements; this project allowed us to develop this expertise. For many radionuclides, the cross sections for destruction, especially (n,{gamma}), are not well known, and there is no adequate model that describes neutron capture. The modeling problem is significant because, at low energies where capture reactions are important, the neutron reaction cross sections show resonance behavior or follow 1/v of the incident neutrons. In the case of odd-odd nuclei, the modeling problem is particularly difficult because degenerate states (rotational bands) present in even-even nuclei have separated in energy. Our work included interpretation of the {gamma}-ray spectra to compare with the Statistical Model and provides information on level density and statistical decay. Neutron capture cross sections are of programmatic interest to defense sciences because many elements were added to nuclear devices in order to determine various details of the nuclear detonation, including fission yields, fusion yields, and mix. Both product nuclei created by (n,2n) reactions and reactant nuclei are transmuted by neutron capture during the explosion. Very few of the (n,{gamma}) cross sections for reactions that create products measured by radiochemists have ever been experimentally determined; most are calculated by radiochemical equivalences. Our new experimentally measured capture cross sections directly impact our knowledge about the uncertainties in device performances, which enhances our capability of carrying out our stockpile stewardship program. Europium and gadolinium cross sections are important for both astrophysics and defense programs. Measurements made prior to this project on stable europium targets differ by 30-40%, which was considered to be significantly disparate. Of the gadolinium isotopes, {sup 151}Gd is important for stockpile stewardship, and {sup 153}Gd is of high interest to astrophysics, and nether of these (radioactive) gadolinium (n,{gamma}) cross sections have been measured. Additional stable gadolinium isotopes, including {sup 157,160}Gd are of interest to astrophysics. Historical measurements of gadolinium isotopes, including {sup 152,154}Gd, had disagreements similar to the 30-40% disagreements found in the historical europium data. Actinide capture cross section measurements are important for both Stockpile Stewardship and for nuclear forensics. We focused on the {sup 242m}Am(n,{gamma}) measurement, as there was no existing capture measurement for this isotope. The cross-section measurements (cross section vs. E{sub n}) were made at the Detector for Advanced Neutron Capture Experiments. DANCE is comprised of a highly segmented array of barium fluoride (BaF{sub 2}) crystals specifically designed for neutron capture-gamma measurements, using small radioactive targets (less than one milligram). A picture of half the array, along with a photo of one crystal, is shown in Fig. 1. DANCE provides the world's leading capability for measurements of neutron capture cross sections with radioactive targets. The DANCE is a 4{pi} calorimeter and uses the intense spallation neutron source the Lujan Center at the Los Alamos National Laboratory. The detector array consists of 159 barium fluoride crystals arranged in a sphere around the target.« less
Code of Federal Regulations, 2012 CFR
2012-07-01
... or equivalent arrangements are valid for the purposes of this section only if persons assuming... recycling, disposal or other means of sound management of the wastes in cases where arrangements for the...
Code of Federal Regulations, 2013 CFR
2013-07-01
... or equivalent arrangements are valid for the purposes of this section only if persons assuming... recycling, disposal or other means of sound management of the wastes in cases where arrangements for the...
Code of Federal Regulations, 2014 CFR
2014-07-01
... or equivalent arrangements are valid for the purposes of this section only if persons assuming... recycling, disposal or other means of sound management of the wastes in cases where arrangements for the...
Code of Federal Regulations, 2011 CFR
2011-07-01
... or equivalent arrangements are valid for the purposes of this section only if persons assuming... recycling, disposal or other means of sound management of the wastes in cases where arrangements for the...
Spaceport news index, December 1962 - February 1972
NASA Technical Reports Server (NTRS)
1972-01-01
This index is intended to serve as a ready reference tool for the names, places and events that comprise the history of John F. Kennedy Space Center. The period covered is December 1962 through February 1972. The arrangement is alphabetical by subject; under each subject, entries are arranged alphabetically by title. To facilitate use, cross references and scope notes have been provided.
Code of Federal Regulations, 2010 CFR
2010-01-01
... provisions, or interest rate provisions, applicable in leasing arrangements? You are not subject to the early... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Are the early payment provisions, or interest rate provisions, applicable in leasing arrangements? 714.8 Section 714.8 Banks and Banking NATIONAL...
46 CFR 199.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2013 CFR
2013-10-01
... falls and a winch. 199.153 Section 199.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Requirements for All Vessels § 199.153 Survival craft launching and recovery arrangements using falls and a... appliances for free-fall launching arrangements, from a position within the survival craft. (b) Each fall...
46 CFR 199.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2014 CFR
2014-10-01
... falls and a winch. 199.153 Section 199.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Requirements for All Vessels § 199.153 Survival craft launching and recovery arrangements using falls and a... appliances for free-fall launching arrangements, from a position within the survival craft. (b) Each fall...
46 CFR 199.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2012 CFR
2012-10-01
... falls and a winch. 199.153 Section 199.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Requirements for All Vessels § 199.153 Survival craft launching and recovery arrangements using falls and a... appliances for free-fall launching arrangements, from a position within the survival craft. (b) Each fall...
Code of Federal Regulations, 2010 CFR
2010-07-01
... newspaper operating arrangement entered into after July 24, 1970. 48.4 Section 48.4 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) NEWSPAPER PRESERVATION ACT § 48.4 Application for approval of joint newspaper operating arrangement entered into after July 24, 1970. (a) Persons desiring to obtain the...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are my reporting requirements under a non-arm's-length transportation arrangement? 206.115 Section 206.115 Mineral Resources MINERALS MANAGEMENT... What are my reporting requirements under a non-arm's-length transportation arrangement? (a) You or your...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 3 2013-07-01 2013-07-01 false What are my reporting requirements under a non-arm's-length transportation arrangement? 1206.115 Section 1206.115 Mineral Resources OFFICE OF NATURAL....115 What are my reporting requirements under a non-arm's-length transportation arrangement? (a) You or...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 3 2012-07-01 2012-07-01 false What are my reporting requirements under a non-arm's-length transportation arrangement? 1206.115 Section 1206.115 Mineral Resources OFFICE OF NATURAL....115 What are my reporting requirements under a non-arm's-length transportation arrangement? (a) You or...
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 3 2014-07-01 2014-07-01 false What are my reporting requirements under a non-arm's-length transportation arrangement? 1206.115 Section 1206.115 Mineral Resources OFFICE OF NATURAL....115 What are my reporting requirements under a non-arm's-length transportation arrangement? (a) You or...
36 CFR 1206.50 - What types of funding and cost sharing arrangements does the Commission make?
Code of Federal Regulations, 2010 CFR
2010-07-01
... opportunity announcements. (2) Cost sharing may include cash or in-kind contributions provided by the... cost sharing arrangements does the Commission make? 1206.50 Section 1206.50 Parks, Forests, and Public... RECORDS COMMISSION Applying for NHPRC Grants § 1206.50 What types of funding and cost sharing arrangements...
Code of Federal Regulations, 2011 CFR
2011-10-01
... cooperative arrangements with courts and law enforcement officials. 304.21 Section 304.21 Public Welfare... § 304.21 Federal financial participation in the costs of cooperative arrangements with courts and law... such activities, specified in § 304.20(b)(2) through (8) of this chapter; (2) Reasonable and essential...
47 CFR 51.713 - Bill-and-keep arrangements for reciprocal compensation.
Code of Federal Regulations, 2011 CFR
2011-10-01
... Telecommunications Traffic § 51.713 Bill-and-keep arrangements for reciprocal compensation. (a) For purposes of this... so, and no showing has been made pursuant to § 51.711(b). (c) Nothing in this section precludes a... 47 Telecommunication 3 2011-10-01 2011-10-01 false Bill-and-keep arrangements for reciprocal...
47 CFR 51.713 - Bill-and-keep arrangements for reciprocal compensation.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Telecommunications Traffic § 51.713 Bill-and-keep arrangements for reciprocal compensation. (a) For purposes of this... so, and no showing has been made pursuant to § 51.711(b). (c) Nothing in this section precludes a... 47 Telecommunication 3 2010-10-01 2010-10-01 false Bill-and-keep arrangements for reciprocal...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-21
... Commission's Program Access Rules and Examination of Programming Tying Arrangements AGENCY: Federal... Program Access Rules and Examination of Programming Tying Arrangements, MB Docket No. 07-198, FCC 10-17... information collection is contained in Sections 4(i), 303(r), and 628 of the Communications Act of 1934, as...
NASA Technical Reports Server (NTRS)
Harris, Thomas A
1939-01-01
An investigation has been made in the N.A.C.A. 7- by 10-foot wind tunnel of a large-chord N.A.C.A. 23012 airfoil with several arrangements of a 40-percent-chord slotted flap to determine the section aerodynamic characteristics of the airfoil as affected by slot shape, flap location, and flap deflection. The flap positions for maximum lift, the polar for arrangements considered favorable for take-off and climb, and the complete section aerodynamic characteristics for selected optimum arrangements were determined. A discussion is given of the relative merits of the various arrangements. A comparison is made of slotted flaps of different chords on the N.A.C.A. 23012 airfoil. The best 40-percent-chord slotted flap is only slightly superior to the 25-percent-chord slotted flap from considerations of maximum lift coefficient and low drag for take-off and initial climb.
Alrashed, Abeer M
2017-06-01
Although informal caregiving is a vital element in the process of supporting individuals with dependency, it is unrecognised most of the time, particularly by caregivers themselves. In Saudi Arabia, little attention has been devoted to informal caregivers; therefore, scarce coverage of this topic is obvious within the literature. This descriptive cross-sectional study was carried to explore informal caregiving within Saudi society by (i) describing informal caregivers and their care recipients and (ii) measuring the scope of care and enabling arrangements in the lives of informal caregivers. Numerical measures of frequency distribution were used to describe the participants and the correlate of demography among 341 female primary caregivers of the elderly (40%), individuals with disabilities (10%) or/and children aged five or younger (51%). Inferential statistics were used to test for significant associations among study variables. The majority of the participants were married with children and were middle-aged. However, the majority of care recipients were living with their caregivers; in addition, they were primarily females cared for by a mother or, less often, by a daughter (in-law). Enabling arrangements were on a moderate level, mainly in healthcare access, financial resources and family support, with lower signs detected in the quality of sleep indicator. These arrangements were significantly associated with caregiver age, education, career status and source of assistance. In conclusion, the statistics revealed by this survey indicated certain challenges that have been encountered by informal caregivers, primarily involving financial and social support. More coverage within the formal system of childcare must be provided to facilitate healthier childhoods. The long-term needs of individuals with dependency must be considered in the planning process of healthcare services, as well, remembering the needs and expectations of informal caregivers. © 2016 Nordic College of Caring Science.
Rossi, Rodolfo
2015-01-01
Introduction Although vaccination is an effective intervention to reduce childhood mortality and morbidity, reasons for incomplete vaccination, including maternal living arrangements, have been marginally explored. This study aims at assessing whether maternal living arrangements are associated with vaccination status of children aged 12–23 months in Zimbabwe. It also explores other variables that may be associated with having children not fully vaccinated. Materials and Methods A cross-sectional analysis was performed on the DHS-VI done in Zimbabwe in 2010–2011 (response rate 93%). Incomplete vaccination of children (outcome), was defined as not having received one dose of BCG and measles, 3 doses of polio and DPT/Pentavalent. Maternal living arrangements (main exposure), and other exposure variables were analysed. Survey logistic regression was used to calculate crude and adjusted OR for exposures against the outcome. Results The dataset included 1,031 children aged 12–23 months. 65.8% of children were fully vaccinated. 65.7% of the mothers were married and cohabitating with a partner, 20.3% were married/partnered but living separately and 14% were not married. Maternal living arrangements were not associated with the vaccination status of children both in crude and adjusted analysis. Factors associated with poorer vaccination status of the children included: no tetanus vaccination for mothers during pregnancy (adjusted OR = 2.1, 95%CI 1.5;3.0), child living away from mother (adjusted OR = 1.5, 95%CI 1.2;1.8), mother’s education (adjusted OR = 0.6, 95%CI 0.4;0.9), high number of children living in the household (adjusted OR = 1.5, 95%CI 1.1;2.2), child age (adjusted OR = 0.7, 95%CI 0.5;0.9). Discussion Maternal living arrangements were not associated with vaccination status of Zimbabwean children. Other factors, such as the mother’s health-seeking behaviour and education were major factors associated with the children’s vaccination status. Given the results of this study, it is strongly recommended that the vaccination coverage is increased by improving access to antenatal care and education for the parents. PMID:26167939
Sora, Mircea-Constantin; Jilavu, Radu; Matusz, Petru
2012-10-01
The aim of this study was to describe a method of developing a computerized model of the human female pelvis using plastinated slices. Computerized reconstruction of anatomical structures is becoming very useful for developing anatomical teaching, research modules and animations. Although databases consisting of serial sections derived from frozen cadaver material exist, plastination represents an alternative method for developing anatomical data useful for computerized reconstruction. A slice anatomy study, using plastinated transparent pelvis cross sections, was performed to obtain a 3D reconstruction. One female human pelvis used for this study, first plastinated as a block, then sliced into thin slices and in the end subjected to 3D computerized reconstruction using WinSURF modeling system (SURFdriver Software). To facilitate the understanding of the complex pelvic floor anatomy on sectional images obtained through MR imaging, and to make the representation more vivid, a female pelvis computer-aided 3D model was created. Qualitative observations revealed that the morphological features of the model were consistent with those displayed by typical cadaveric specimens. The quality of the reconstructed images appeared distinct, especially the spatial positions and complicated relationships of contiguous structures of the female pelvis. All reconstructed structures can be displayed in groups or as a whole and interactively rotated in 3D space. The utilization of plastinates for generating tissue sections is useful for 3D computerized modeling. The 3D model of the female pelvis presented in this paper provides a stereoscopic view to study the adjacent relationship and arrangement of respective pelvis sections. A better understanding of the pelvic floor anatomy is relevant to gynaecologists, radiologists, surgeons, urologists, physical therapists and all professionals who take care of women with pelvic floor dysfunction.
Frisch, E.; Johnson, C.G.
1962-05-15
A detachable coupling arrangement is described which provides for varying the length of the handle of a tool used in relatively narrow channels. The arrangement consists of mating the key and keyhole formations in the cooperating handle sections. (AEC)
Code of Federal Regulations, 2010 CFR
2010-04-01
... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Exemption of certain direct participation program securities from the arranging provisions of sections 7(c) and 11(d)(1). 240.3a12-9 Section 240.3a12-9 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) GENERAL...
One-third selection scheme for addressing a ferroelectric matrix arrangement
NASA Technical Reports Server (NTRS)
Tannas, Jr., Lawrence E. (Inventor)
1979-01-01
An improved scheme for selectively addressing a matrix arrangement comprised of ferroelectrics having x and y orthogonally disposed intersecting lines. A one-third selection scheme is utilized that includes normalized selection signals having amplitudes: V.sub.x =0; V.sub.x =2/3; V.sub.y =1/3; and V.sub.y =1, which signals can be applied to the intersection of an x and y-line. The instant selection scheme minimizes both hysteresis creep and the cross-coupling voltage between x and y-lines to prevent undesirable hysteresis switching of the ferroelectric matrix arrangement.
ERIC Educational Resources Information Center
Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.
This compilation lists research completed in health, physical education, and allied areas during 1974. It is arranged in three parts. Part one is an index which cross references the listings in parts two and three. References are arranged under subject headings, which are in alphabetical order. Instructions for using the index are also given in…
ERIC Educational Resources Information Center
Rothstein, Anne L., Ed.; Nelson, Jack, Ed.
This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1979. It is arranged in three parts. Part one, the index, gives cross references for all the listings in parts two and three. References are arranged alphabetically under the subject headings. Part two contains a bibliography…
Regionalization of Health Care Services within the Department of Defense
1981-02-01
systems that were linked by formal and informal sharing, coordination, and cooperation. Shared services , cross utilization of personnel, and other limited...wasappearing in the private sector. This effort was in the form of multihospital systems and shared services organizations. These arrangements were...these are considered to be of greatest Importance when looking at the 8 reasons for success of multihospital systems and shared services arrangements
DOE Office of Scientific and Technical Information (OSTI.GOV)
Strassburger, E.; Patel, P.; McCauley, J. W.
An Edge-on Impact (EOI) technique, developed at the Ernst-Mach-Institute (EMI), coupled with a Cranz-Schardin high-speed camera, has been successfully utilized to visualize dynamic fracture in many brittle materials. In a typical test, the projectile strikes one edge of a specimen and damage formation and fracture propagation is recorded during the first 20 {mu}s after impact. In the present study, stress waves and damage propagation in fused silica and AlON were examined by means of two modified Edge-on Impact arrangements. In one arrangement, fracture propagation was observed simultaneously in side and top views of the specimens by means of two Cranz-Schardinmore » cameras. In another arrangement, the photographic technique was modified by placing the specimen between crossed polarizers and using the photo-elastic effect to visualize the stress waves. Pairs of impact tests at approximately equivalent velocities were carried out in transmitted plane (shadowgraphs) and crossed polarized light.« less
Plasma Centrifuge Heat Engine - a Route to Non-thermal p- 11 B Fusion
NASA Astrophysics Data System (ADS)
Barnes, D. C.
2007-06-01
An invention [US Patent and Trademark Office App. Nos. 60/596567 (2005) and 60/766791 (2006)] combines centrifugal and dipole confinement, with recent oscillating plasma theory. The plasma undergoes compression/expansion (C/E), parallel to B by centrifugal force and perpendicular to B by B variation, providing a thermal cycle which recovers most (>95%) of heating as mechanical energy. This gives a "Q-amplifier" for beam-target systems. Centrifugally confined Boron plasma undergoes C/E by slow, cross-B interchange activity. Parallel and perpendicular C/E are matched by the rotation profile which arises naturally. Hot plasma is heated and cold plasma is cooled. Beam-target fusion reactions occur in the hot plasma region and expansion returns most of the heat energy as rotation energy. Rotation energy, in turn, produces waves which drive protons to an energy near the fusion peak cross section. A possible machine, including the arrangement of magnets and HV, is described.
Boerner, Kathrin; Cimarolli, Verena R
2005-10-01
To examine the importance of different life goals among working-age adults with vision impairment, the extent to which vision impairment interfered with goals, and how rehabilitation addressed these life goals. Cross-sectional descriptive study. Vision rehabilitation agency. Working-age adults with visual impairment. Telephone interviews using structured and open-ended assessments of life goal importance, goal interference due to vision loss, the role of goals in rehabilitation, and indicators of well-being. Eighty-six people participated. The life domains most frequently rated as extremely important were finances (60), residential and domestic arrangements (55), family (51), partner (48), and personal care (48). The extent to which vision loss interferes with these life goals was extreme for finances (46), residential and domestic arrangements (36), partner (27), family (25), and personal care (14). A life goal was addressed in rehabilitation: residential/domestic arrangements (41), work (39), finances (31), leisure/hobbies (28), personal care (24), family (17), partner (16), friends (10), and religion/life philosophy (8). Reports of a life goal being addressed in ineffective ways emerged for functional life goals, but not for relationship and religion/life philosophy goals. Goal interference was significantly correlated with well-being indicators across life domains. In contrast only partner and family relationship importance were significantly linked with well-being indicators. Relationship-related goals were a top priority for this study population, but functional compared to relationship goals were more commonly addressed in vision rehabilitation services.
Relationship of crowded teeth and Oral Hygiene among urban population in Medan
NASA Astrophysics Data System (ADS)
Bahirrah, Siti
2018-03-01
Crowded teeth could present a challenge in maintaining oral hygiene through brushing, as it is difficult to remove food debris in the interdental area, causing plaque accumulation and calculus formation, which leads to caries and gingivitis, or even destruction of the supporting tissue, which leads to tooth mobility. This study aims to determine the relationship of crowded teeth and oral hygiene among the urban population in Medan. This research is an analytic study with a cross-sectional design. The samples of this research consists of 100 adolescents in Medan. Based on the examination result of 100 subjects, 50 subjects with normal tooth arrangement, and 50 subjects with crowded teeth. This information was determined by examination of the dental condition and Oral Hygiene Index Simplified (OHI-S) measurement. The examination was performed by placing the explorer on 1/3 incisal or occlusal area and gently moving it to the 1/3 gingival or cervical area on a specific tooth. The results of the study were tested with the Chi-square test. The result shows that subjects with normal tooth arrangement present average OHI-S score of 0.66 which is categorized as good oral hygiene. Subjects with a crowded dentition exhibit an average OHI-S score of 1.33 which was categorized as moderate oral hygiene. The findings of this research reveal that there is a significant correlation between of crowded teeth and oral hygiene among adolescents in Medan. Abnormal tooth arrangement influences the condition of oral hygiene among adolescents.
NASA Technical Reports Server (NTRS)
Jorgensen, L. H.; Nelson, E. R.
1976-01-01
An experimental investigation was conducted by wind tunnel to measure the static aerodynamic characteristics for bodies of circular and elliptic cross section with various thin flat plate wings and a thin tail consisting of horizontal and vertical parts. The wings had aspect ratios of 4 and taper ratios of about 0, 0.25, and 0.5. Two additional wings, which had taper ratios near 0.25 and aspect ratios of about 3 and 5, were also tested in combination with the bodies and tail. All wings had about the same planform area. The exposed area of the horizontal portion of the tail was about 33 to 36 percent of the exposed area of the wings. The exposed area of the vertical tail fin was about 22 to 24 percent of the exposed area of the wings. The elliptic body, with an a/b = 2 cross section, had the same length and axial distribution of cross sectional area as the circular body. The circular body had a cylindrical aftersection of fineness ratio 7, and it was tested with the wings and tail in combination with tangent ogive noses that had fineness ratios of 2.5, 3.0, 3.5, and 5.0. In addition, an ogive nose with a rounded tip and an ogive nose with two different nose strake arrangements were used. Nineteen configuration combinations were tested at Mach numbers of 0.6, 0.9, 1.5, and 2.0 at angles of attack from 0 to 58 deg. The Reynolds numbers, based on body base diameter, were about 4.3 X 100,000.
Hearing loss in workers exposed to epoxy adhesives and noise: a cross-sectional study
Yang, Hsiao-Yu; Shie, Ruei-Hao; Chen, Pau-Chung
2016-01-01
Objectives Epoxy adhesives contain organic solvents and are widely used in industry. The hazardous effects of epoxy adhesives remain unclear. The objective of this study was to investigate the risk of hearing loss among workers exposed to epoxy adhesives and noise. Design Cross-sectional study. Methods For this cross-sectional study, we recruited 182 stone workers who were exposed to both epoxy adhesives and noise, 89 stone workers who were exposed to noise only, and 43 workers from the administrative staff who had not been exposed to adhesives or noise. We obtained demographic data, occupational history and medical history through face-to-face interviews and arranged physical examinations and pure-tone audiometric tests. We also conducted walk-through surveys in the stone industry. A total of 40 representative noise assessments were conducted in 15 workplaces. Air sampling was conducted at 40 workplaces, and volatile organic compounds were analysed using the Environmental Protection Agency (EPA) TO-15 method. Results The mean sound pressure level was 87.7 dBA (SD 9.9). The prevalence of noise-induced hearing loss was considerably increased in the stone workers exposed to epoxy adhesives (42%) compared with the stone workers who were not exposed to epoxy adhesives (21%) and the administrative staff group (9.3%). A multivariate logistic regression analysis revealed that exposure to epoxy adhesives significantly increased the risk of hearing loss between 2 and 6 kHz after adjusting for age. Significant interactions between epoxy adhesives and noise and hearing impairment were observed at 3, 4 and 6 kHz. Conclusions Epoxy adhesives exacerbate hearing impairment in noisy environments, with the main impacts occurring in the middle and high frequencies. PMID:26892792
Code of Federal Regulations, 2013 CFR
2013-04-01
... 26 Internal Revenue 6 2013-04-01 2013-04-01 false Methods to determine taxable income in connection with a cost sharing arrangement (temporary). 1.482-7T Section 1.482-7T Internal Revenue INTERNAL...) Adjustments § 1.482-7T Methods to determine taxable income in connection with a cost sharing arrangement...
Code of Federal Regulations, 2012 CFR
2012-04-01
... 26 Internal Revenue 6 2012-04-01 2012-04-01 false Methods to determine taxable income in connection with a cost sharing arrangement (temporary). 1.482-7T Section 1.482-7T Internal Revenue INTERNAL...) Adjustments § 1.482-7T Methods to determine taxable income in connection with a cost sharing arrangement...
National CrossTalk. Volume 13, Number 3, Summer 2005
ERIC Educational Resources Information Center
Trombley, William, Ed.
2005-01-01
The primary purpose of "National CrossTalk" is to stimulate informed discussion and debate of higher education issues. This issue contains the following articles: (1) Virginia Tries Restructuring: Financial Stress Leads to New Arrangements between State and Campuses (Robert A. Jones); (2) Georgia's Odd Couple: Can Two Foundations Share a…
Lunkenheimer, Paul Peter; Niederer, Peter
2012-01-01
In order to visualise the mammalian myocardial structure in its entirety, we distended excised porcine left ventricles by inflating the coronary arteries with compressed air, using rising pressures between 100 and 300 kPa. The ventricular walls became elongated, and left ventricular cavity widened with rising pressure albeit with insignificant changes in their mural thickness. High resolution computed tomographic analysis subsequent to pneumographic distension revealed a hierarchical structure. First, a feathered arrangement of the cardiomyocytes aggregated together mainly within the equatorial area of the ventricle, giving an overall appearance of systematically arranged spatially netted lamellar structures with pronounced local inhomogeneity. Second, histological examination in orthogonal planes, analysing samples dividing the ventricular walls into 18 segments, showed the lamellae themselves to be made up of aggregated chains of myocytes, the alignment of these chains producing the well-recognised change in so-called helical angle when traced through the thickness of the walls. Transmural length sections removed from the same positions in the ventricular walls showed inter-lamellar connections aligned in the direction from the ventricular base to the apex which were definitely longer than those we observed in transmural cross-sections. Electron-microscopy exposed the two compartments of interstitial connective tissue, suggesting the endomysium to bind long chains of myocytes to lamellar aggregates, while the loose perimysium strengthens the structure of the lubricating medium which eases the gliding of the lamellar aggregates relative to one another.
A review of some Reynolds number effects related to bodies at high angles of attack
NASA Technical Reports Server (NTRS)
Polhamus, E. C.
1984-01-01
A review of some effects of Reynolds number on selected aerodynamic characteristics of two- and three-dimensional bodies of various cross sections in relation to fuselages at high angles of attack at subsonic and transonic speeds is presented. Emphasis is placed on the Reynolds number ranges above the subcritical and angles of attack where lee side vortex flow or unsteady wake type flows predominate. Lists of references, arranged in subject categories, are presented with emphasis on those which include data over a reasonable Reynolds number range. Selected Reynolds number data representative of various aerodynamic flows around bodies are presented and analyzed and some effects of these flows on fuselage aerodynamic parameters are discussed.
Nuclear reactor composite fuel assembly
Burgess, Donn M.; Marr, Duane R.; Cappiello, Michael W.; Omberg, Ronald P.
1980-01-01
A core and composite fuel assembly for a liquid-cooled breeder nuclear reactor including a plurality of elongated coextending driver and breeder fuel elements arranged to form a generally polygonal bundle within a thin-walled duct. The breeder elements are larger in cross section than the driver elements, and each breeder element is laterally bounded by a number of the driver elements. Each driver element further includes structure for spacing the driver elements from adjacent fuel elements and, where adjacent, the thin-walled duct. A core made up of the fuel elements can advantageously include fissile fuel of only one enrichment, while varying the effective enrichment of any given assembly or core region, merely by varying the relative number and size of the driver and breeder elements.
Method and apparatus for casting conductive and semi-conductive materials
Ciszek, T.F.
1984-08-13
A method and apparatus is disclosed for casting conductive and semi-conductive materials. The apparatus includes a plurality of conductive members arranged to define a container-like area having a desired cross-sectional shape. A portion or all of the conductive or semi-conductive material which is to be cast is introduced into the container-like area. A means is provided for inducing the flow of an electrical current in each of the conductive members, which currents act collectively to induce a current flow in the material. The induced current flow through the conductive members is in a direction substantially opposite to the induced current flow in the material so that the material is repelled from the conductive members during the casting process.
Method and apparatus for casting conductive and semiconductive materials
Ciszek, Theodore F.
1986-01-01
A method and apparatus is disclosed for casting conductive and semiconduce materials. The apparatus includes a plurality of conductive members arranged to define a container-like area having a desired cross-sectional shape. A portion or all of the conductive or semiconductive material which is to be cast is introduced into the container-like area. A means is provided for inducing the flow of an electrical current in each of the conductive members, which currents act collectively to induce a current flow in the material. The induced current flow through the conductive members is in a direction substantially opposite to the induced current flow in the material so that the material is repelled from the conductive members during the casting process.
SiN-assisted polarization-insensitive multicore fiber to silicon photonics interface
NASA Astrophysics Data System (ADS)
Poulopoulos, Giannis N.; Kalavrouziotis, Dimitrios; Mitchell, Paul; Macdonald, John R.; Bakopoulos, Paraskevas; Avramopoulos, Hercules
2015-06-01
We demonstrate a polarization-insensitive coupler interfacing multicore-fiber (MCF) to silicon waveguides. It comprises a 3D glass fanout transforming the circular MCF core-arrangement to linear and performing initial tapering, followed by a Spot-Size-Converter on the silicon chip. Glass waveguides are formed of multiple overlapped modification elements and appropriate offsetting thereof yields tapers with symmetric cross-section. The Spot-Size-Converter is an inverselytapered silicon waveguide with a tapered polymer overcladding where light is initially coupled, whereas phase-matching gradually shifts it towards the silicon core. Co-design of the glass fanout and Spot-Size-Converter obtains theoretical loss below 1dB for the overall Si-to-MCF transition in both polarizations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shin, D.S.; Han, M.K.; Lee, J.H.
1996-12-31
In this paper, the authors have investigated effects of the arrangement of the voids in LDPE samples on PD characteristics, such as phase-related magnitude of PD, number of discharges. The differences of the PD patterns may be attributed to the arrangements of the voids. They have also employed available statistical operators, such as discharge factor and cross correlation factor in order to analyze the PD characteristics. The authors could conclude that partial discharge characteristics show quite different patterns due to the arrangements of voids in spite of the same size. The experimental results suggest that it is important to knowmore » the arrangements of the multiple voids as well as to obtain the information about the number of defects in the insulators.« less
Nugent, Timothy; Jones, David T.
2010-01-01
Alpha-helical transmembrane proteins constitute roughly 30% of a typical genome and are involved in a wide variety of important biological processes including cell signalling, transport of membrane-impermeable molecules and cell recognition. Despite significant efforts to predict transmembrane protein topology, comparatively little attention has been directed toward developing a method to pack the helices together. Here, we present a novel approach to predict lipid exposure, residue contacts, helix-helix interactions and finally the optimal helical packing arrangement of transmembrane proteins. Using molecular dynamics data, we have trained and cross-validated a support vector machine (SVM) classifier to predict per residue lipid exposure with 69% accuracy. This information is combined with additional features to train a second SVM to predict residue contacts which are then used to determine helix-helix interaction with up to 65% accuracy under stringent cross-validation on a non-redundant test set. Our method is also able to discriminate native from decoy helical packing arrangements with up to 70% accuracy. Finally, we employ a force-directed algorithm to construct the optimal helical packing arrangement which demonstrates success for proteins containing up to 13 transmembrane helices. This software is freely available as source code from http://bioinf.cs.ucl.ac.uk/memsat/mempack/. PMID:20333233
A chaotic micromixer using obstruction-pairs
NASA Astrophysics Data System (ADS)
Park, Jang Min; Duck Seo, Kyoung; Kwon, Tai Hun
2010-01-01
A micromixer is one of the most important components for a chemical and/or diagnostic analysis in microfluidic devices such as a micro-total-analysis-system and a lab-on-a-chip. In this paper, a novel chaotic micromixer is developed in a simple design by introducing obstruction-pairs on the bottom of a microchannel. An obstruction-pair, which is composed of two hexahedron blocks arranged in an asymmetric manner, can induce a rotational flow along the down-channel direction due to the anisotropy of flow resistance. By utilizing this characteristic of the obstruction-pair, four mixing units are designed in such a way that three obstruction-pairs induce three rotational flows which result in a down-welling and a hyperbolic point in the channel cross-section. There can be a variety of micromixer geometries by arranging the mixing units in various sequences along the microchannel, and their mixing performances will differ from each other due to different flow characteristics. In this regard, numerical investigations are carried out to predict and characterize the mixing performances of various micromixers. Also experimental verifications are carried out by a flow visualization technique using phenolphthalein and sodium hydroxide solutions in a polydimethylsiloxane-based micromixer.
Fish schooling as a basis for vertical axis wind turbine farm design.
Whittlesey, Robert W; Liska, Sebastian; Dabiri, John O
2010-09-01
Most wind farms consist of horizontal axis wind turbines (HAWTs) due to the high power coefficient (mechanical power output divided by the power of the free-stream air through the turbine cross-sectional area) of an isolated turbine. However when in close proximity to neighboring turbines, HAWTs suffer from a reduced power coefficient. In contrast, previous research on vertical axis wind turbines (VAWTs) suggests that closely spaced VAWTs may experience only small decreases (or even increases) in an individual turbine's power coefficient when placed in close proximity to neighbors, thus yielding much higher power outputs for a given area of land. A potential flow model of inter-VAWT interactions is developed to investigate the effect of changes in VAWT spatial arrangement on the array performance coefficient, which compares the expected average power coefficient of turbines in an array to a spatially isolated turbine. A geometric arrangement based on the configuration of shed vortices in the wake of schooling fish is shown to significantly increase the array performance coefficient based upon an array of 16 x 16 wind turbines. The results suggest increases in power output of over one order of magnitude for a given area of land as compared to HAWTs.
The diversity issue revisited: international students in clinical environment.
Pitkäjärvi, Marianne; Eriksson, Elina; Pitkälä, Kaisu
2012-01-01
Background. Globalization within higher education leads to an increase in cultural and linguistic diversity in student populations. The purpose of this study was to explore culturally diverse health care students' experiences in clinical environment in Finland, and to compare them with those of native Finnish students' participating in the same program. Method. A cross-sectional survey was performed at 10 polytechnic faculties of health care in Finland. 283 respondents (148 international and 95 Finnish students) responded to items concerning clinical rotation. The survey included items grouped as dimensions: (1) welcoming clinical environment, (2) unsupportive clinical environment, (3) approach to cultural diversity, (4) communication, and (5) structural arrangements. Results. International students felt as welcome on their placements as Finnish students. Concerning structural arrangements set up to facilitate preceptorship and approach to cultural diversity in the learning environment, the two groups' opinions were similar. However, international students were more likely than Finnish students to experience their clinical learning environment as unsupportive (P < 0.001). In addition, their experiences of communication with the staff was poorer than that of their Finnish peers' (P = 0.04). Conclusions. Awareness of strategies that enhance understanding, acceptance, and appreciation of cultural and linguistic diversity in any health care setting are needed.
Scottish survey of public place defibrillators.
Ashimi, A O; Cobbe, S M; Pell, J P
2010-08-01
Public place defibrillators can reduce delays to defibrillation but their cost-effectiveness has not been evaluated in randomised trials. In Scotland, unlike England, no health sector funding has been provided. Nonetheless, anecdotal evidence suggests they are increasing in number. A cross-sectional survey was conducted of all airports, shopping malls, leisure centres, and major train and bus stations to determine whether defibrillators had been purchased and by whom, the training and maintenance arrangements, and whether they had been discharged. Of the 183 eligible sites, 153 (84%) participated. 33 (22%) had at least one defibrillator. Those in airports and shopping malls were purchased privately. Those in leisure centres were bought by charities or local authorities. The majority (97%) provided training to existing staff, but 6 (18%) provided no training to new staff. Only 6 (18%) had a maintenance agreement and 8 (24%) a replacement policy. Only one site permitted public access. Defibrillators had been discharged in 10 (30%) sites. Of the 32 people shocked, 23 (72%) survived until the ambulance arrived. Despite absence of health sector funding, defibrillators are located in 22% of high footfall public places. Those purchasing defibrillators need to ensure adequate maintenance, replacement and training arrangements.
Morphological analysis of the hindlimb in apes and humans. I. Muscle architecture.
Payne, R C; Crompton, R H; Isler, K; Savage, R; Vereecke, E E; Günther, M M; Thorpe, S K S; D'Août, K
2006-06-01
We present quantitative data on the hindlimb musculature of Pan paniscus, Gorilla gorilla gorilla, Gorilla gorilla graueri, Pongo pygmaeus abelii and Hylobates lar and discuss the findings in relation to the locomotor habits of each. Muscle mass and fascicle length data were obtained for all major hindlimb muscles. Physiological cross-sectional area (PCSA) was estimated. Data were normalized assuming geometric similarity to allow for comparison of animals of different size/species. Muscle mass scaled closely to (body mass)(1.0) and fascicle length scaled closely to (body mass)(0.3) in most species. However, human hindlimb muscles were heavy and had short fascicles per unit body mass when compared with non-human apes. Gibbon hindlimb anatomy shared some features with human hindlimbs that were not observed in the non-human great apes: limb circumferences tapered from proximal-to-distal, fascicle lengths were short per unit body mass and tendons were relatively long. Non-human great ape hindlimb muscles were, by contrast, characterized by long fascicles arranged in parallel, with little/no tendon of insertion. Such an arrangement of muscle architecture would be useful for locomotion in a three dimensionally complex arboreal environment.
Morphological analysis of the hindlimb in apes and humans. I. Muscle architecture
Payne, R C; Crompton, R H; Isler, K; Savage, R; Vereecke, E E; Günther, M M; Thorpe, S K S; D'Août, K
2006-01-01
We present quantitative data on the hindlimb musculature of Pan paniscus, Gorilla gorilla gorilla, Gorilla gorilla graueri, Pongo pygmaeus abelii and Hylobates lar and discuss the findings in relation to the locomotor habits of each. Muscle mass and fascicle length data were obtained for all major hindlimb muscles. Physiological cross-sectional area (PCSA) was estimated. Data were normalized assuming geometric similarity to allow for comparison of animals of different size/species. Muscle mass scaled closely to (body mass)1.0 and fascicle length scaled closely to (body mass)0.3 in most species. However, human hindlimb muscles were heavy and had short fascicles per unit body mass when compared with non-human apes. Gibbon hindlimb anatomy shared some features with human hindlimbs that were not observed in the non-human great apes: limb circumferences tapered from proximal-to-distal, fascicle lengths were short per unit body mass and tendons were relatively long. Non-human great ape hindlimb muscles were, by contrast, characterized by long fascicles arranged in parallel, with little/no tendon of insertion. Such an arrangement of muscle architecture would be useful for locomotion in a three dimensionally complex arboreal environment. PMID:16761973
APPARATUS FOR MEASURING TOTAL NEUTRON CROSS SECTIONS
Cranberg, L.
1959-10-13
An apparatus is described for measuring high-resolution total neutron cross sections at high counting rate in the range above 50-kev neutron energy. The pulsed-beam time-of-flight technique is used to identify the neutrons of interest which are produced in the target of an electrostatic accelerator. Energy modulation of the accelerator . makes it possible to make observations at 100 energy points simultaneously. 761O An apparatus is described for monitoring the proton resonance of a liquid which is particulariy useful in the continuous purity analysis of heavy water. A hollow shell with parallel sides defines a meander chamber positioned within a uniform magnetic fieid. The liquid passes through an inlet at the outer edge of the chamber and through a spiral channel to the central region of the chamber where an outlet tube extends into the chamber perpendicular to the magnetic field. The radiofrequency energy for the monitor is coupled to a coil positioned coaxially with the outlet tube at its entrance point within the chamber. The improvement lies in the compact mechanical arrangement of the monitor unit whereby the liquid under analysis is subjected to the same magnetic field in the storage and sensing areas, and the entire unit is shielded from external electrostatic influences.
Noor, Tooba; Raza, Natasha; Haq, Gulfishan
2014-07-01
To evaluate the neonatal resuscitation competence of obstetrical trainees to assess the gap in knowledge and to determine training needs. The cross-sectional study was conducted at the Department of Gynaecology and Obstetrics, Civil Hospital, Karachi, from January to March 2013 and comprised House Officers and Postgraduate trainees. A questionnaire was used to test the evaluation skills of different conditions and choice of appropriate action required during neonatal resuscitation. Data was collected and analysed through SPSS 17.0. Of the 102 obstetrical trainees, 44 (43.1%) were House Officers and 58 (56.9%) were Postgraduate trainees with an overall mean age 25.69 +/- 2.3 years. Only 19 (18.6%) subjects cleared the test; 8 (42.1%) of them were House Officers and 11 (57.9%) were Postgraduate trainees. The result did not show any significant difference between those who had previous training or those who had performed neonatal resuscitation and those who had no such exposure. Majority, 92 (90.2%) considered their knowledge inadequate and 99 (97%) favoured that updated neonatal resuscitation programmes should be periodically arranged. The study showed inadequate level of knowledge on neonatal resuscitation amongst obstetrical trainees. There is urgent need of formal training programmes which can make doctors skilful enough to face any adverse neonatal outcome professionally.
Heat Transfer Coefficient Distribution in the Furnace of a 300MWe CFB Boiler
NASA Astrophysics Data System (ADS)
Zhang, P.; Lu, J. F.; Yang, H. R.; Zhang, J. S.; Zhang, H.; Yue, G. X.
Properly understanding and calculating the distributions of heat flux and heat transfer coefficient (α) in the furnace is important in designing a circulating fluidized bed (CFB) boiler, especially with supercritical parameters. Experimental study on the heat transfer in a commercial 300MWe CFB boiler was conducted. The α from the bed to the water wall was measured by the finite element method (FEM), at five different heights. The influence of suspension density and bed temperature on α was analyzed. It was found that the pressure difference between the inlet and exit of the three cyclones, and the chamber pressure of the corresponding loop seal were not equal. The results indicated the suspension solid density was non-uniform in the cross section at a certain height. Consequently, the distributions of heat flux and α in the horizontal plane in the furnace was non-uniform. The furnace can divided into three sections according to the arrangement of the platen superheaters hanging in the upper CFB furnace. In each section, the heat flux near the center showed increasing trend.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Definition. 9.601 Section 9.601 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Team Arrangements 9.601 Definition. Contractor team arrangement, as used...
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Definition. 9.601 Section 9.601 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Team Arrangements 9.601 Definition. Contractor team arrangement, as used...
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 9.601 Section 9.601 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Team Arrangements 9.601 Definition. Contractor team arrangement, as used...
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Definition. 9.601 Section 9.601 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Team Arrangements 9.601 Definition. Contractor team arrangement, as used...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Definition. 9.601 Section 9.601 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Team Arrangements 9.601 Definition. Contractor team arrangement, as used...
Conceptual design of the scientific instrument arrangement for the large space telescope
NASA Technical Reports Server (NTRS)
Zurasky, J. L.
1974-01-01
A description of the scientific instrument arrangement for the large space telescope (LST) is given, with some of the rationale for selecting this concept. The first section of this report describes the basic configuration and was designed for an f/20 telescope focal plane. The subsequent LSTWG meeting held in November gave some redirection to the scientific requirements, and these changes are described in the section, Configuration Update.
Code of Federal Regulations, 2011 CFR
2011-07-01
... royalty relief arrangement for an oil and gas lease be ended? 203.55 Section 203.55 Mineral Resources... REVENUE MANAGEMENT RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief... for an oil and gas lease be ended? (a) If you have an end-of-life royalty relief arrangement, you may...
Firm-Provided Training in Europe and the Limits of National Skills Strategies
ERIC Educational Resources Information Center
Markowitsch, Jorg; Kapplinger, Bernd; Hefler, Gunter
2013-01-01
This article addresses cross-country and cross-period differences in average levels of training activity from an institutional perspective. Firm-provided training in Europe between 1999 and 2010 is scrutinized in order to explore whether diverse institutional arrangements that can be linked to welfare state regimes can yield discernible…
48 CFR 1601.104-2 - Arrangement of regulation.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Arrangement of regulation. 1601.104-2 Section 1601.104-2 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM...
48 CFR 1601.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Publication and code arrangement. 1601.104-1 Section 1601.104-1 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS...
48 CFR 1601.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Publication and code arrangement. 1601.104-1 Section 1601.104-1 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS...
48 CFR 1601.104-2 - Arrangement of regulation.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Arrangement of regulation. 1601.104-2 Section 1601.104-2 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM...
48 CFR 1601.104-2 - Arrangement of regulation.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Arrangement of regulation. 1601.104-2 Section 1601.104-2 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM...
48 CFR 1601.104-2 - Arrangement of regulation.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Arrangement of regulation. 1601.104-2 Section 1601.104-2 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM...
48 CFR 1601.104-2 - Arrangement of regulation.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Arrangement of regulation. 1601.104-2 Section 1601.104-2 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM...
48 CFR 1601.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Publication and code arrangement. 1601.104-1 Section 1601.104-1 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS...
Code of Federal Regulations, 2012 CFR
2012-04-01
... 19 Customs Duties 3 2012-04-01 2012-04-01 false Definitions. 357.101 Section 357.101 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE SHORT SUPPLY PROCEDURES § 357.101 Definitions. (a) Arrangement means an arrangement between the United States Government and a foreign...
48 CFR 42.503-1 - Postaward conference arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Postaward conference arrangements. 42.503-1 Section 42.503-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Postaward Orientation 42.503-1 Postaward...
48 CFR 501.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Publication and code arrangement. 501.105-1 Section 501.105-1 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION GENERAL GENERAL SERVICES ADMINISTRATION ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance...
47 CFR 51.713 - Bill-and-keep arrangements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 3 2013-10-01 2013-10-01 false Bill-and-keep arrangements. 51.713 Section 51.713 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERCONNECTION Reciprocal Compensation for Transport and Termination of Telecommunications Traffic § 51.713 Bill...
48 CFR 3401.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Arrangement of regulations. 3401.104-2 Section 3401.104-2 Federal Acquisition Regulations System DEPARTMENT OF EDUCATION ACQUISITION REGULATION GENERAL ED ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 3401.104-2...
42 CFR 417.548 - Provider services through arrangements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 3 2010-10-01 2010-10-01 false Provider services through arrangements. 417.548 Section 417.548 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND...
Wigner, E.P.; Ohlinger, L.E.; Young, G.J.; Weinberg, A.M.
1959-02-17
Radiation shield construction is described for a nuclear reactor. The shield is comprised of a plurality of steel plates arranged in parallel spaced relationship within a peripheral shell. Reactor coolant inlet tubes extend at right angles through the plates and baffles are arranged between the plates at right angles thereto and extend between the tubes to create a series of zigzag channels between the plates for the circulation of coolant fluid through the shield. The shield may be divided into two main sections; an inner section adjacent the reactor container and an outer section spaced therefrom. Coolant through the first section may be circulated at a faster rate than coolant circulated through the outer section since the area closest to the reactor container is at a higher temperature and is more radioactive. The two sections may have separate cooling systems to prevent the coolant in the outer section from mixing with the more contaminated coolant in the inner section.
Code of Federal Regulations, 2010 CFR
2010-07-01
... royalty relief arrangement for an oil and gas lease be ended? 203.55 Section 203.55 Mineral Resources... ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for End-Of-Life Leases § 203.55 Under what conditions can my end-of-life royalty relief arrangement for an oil and gas lease be ended? (a) If you have...
45 CFR 400.72 - Arrangements for employability services.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Section 400.72 Public Welfare Regulations Relating to Public Welfare OFFICE OF REFUGEE RESETTLEMENT, ADMINISTRATION FOR CHILDREN AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM...-administered RCA programs. (a) The State agency must make such arrangements as are necessary to enable refugees...
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Purpose. 199.01 Section 199.01 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LIFESAVING APPLIANCES AND ARRANGEMENTS LIFESAVING SYSTEMS FOR... appliances and arrangements for all inspected U.S. vessels except for— (1) Offshore supply vessels, which are...
21 CFR 26.64 - Transitional arrangements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Transitional arrangements. 26.64 Section 26.64 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS...
48 CFR 1301.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Publication and code arrangement. 1301.105-1 Section 1301.105-1 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE GENERAL DEPARTMENT OF COMMERCE ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1301.105-1...
48 CFR 401.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Publication and code arrangement. 401.105-1 Section 401.105-1 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL AGRICULTURE ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 401.105-1 Publication and...
75 FR 47898 - Proposed Collection; Comment Request for Regulation Project
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-09
... comments concerning an existing final regulation, REG-152354-04, Designated Roth Contributions to Cash or... INFORMATION: Title: Designated Roth Contributions to Cash or Deferred Arrangements Under Section 401(k). OMB... concerning the requirements for designated Roth contributions to qualified cash or deferred arrangements...
48 CFR 2501.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Publication and code arrangement. 2501.104-1 Section 2501.104-1 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 2501.104-1 Publication and...
48 CFR 1201.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Publication and code arrangement. 1201.105-1 Section 1201.105-1 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1201.105-1 Publication and...
48 CFR 401.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Publication and code arrangement. 401.105-1 Section 401.105-1 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL AGRICULTURE ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 401.105-1 Publication and...
48 CFR 1201.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Publication and code arrangement. 1201.105-1 Section 1201.105-1 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1201.105-1 Publication and...
48 CFR 401.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Publication and code arrangement. 401.105-1 Section 401.105-1 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL AGRICULTURE ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 401.105-1 Publication and...
48 CFR 401.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Publication and code arrangement. 401.105-1 Section 401.105-1 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE GENERAL AGRICULTURE ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 401.105-1 Publication and...
48 CFR 2501.104-1 - Publication and code arrangement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Publication and code arrangement. 2501.104-1 Section 2501.104-1 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 2501.104-1 Publication and...
Ultrasonic detection of knots, cross grain and bark pockets in wooden pallet parts
Mohammed F. Kabir; Daniel L. Schmoldt; Mark E. Schafer
2000-01-01
This study investigates defect detection in wooden pallet parts using ultrasonic scanning. Yellow-poplar (Liriodendron tulipifera, L.) deckboards were scanned using two rolling transducers in a pitch-catch arrangement to detect unsound and sound knots, bark pockets and cross grain. Data were collected, stored, and processed using LabView? software. Six ultrasonic...
ERIC Educational Resources Information Center
Wheelahan, Leesa
Issues in developing the institutional structures to deliver cross-sectoral education and training were examined in a study of five Australian single-sector higher education institutions with various institutional arrangements with the vocational education and training (VET) sector and five dual-sector universities. Data were collected from the…
A MS-lesion pattern discrimination plot based on geostatistics.
Marschallinger, Robert; Schmidt, Paul; Hofmann, Peter; Zimmer, Claus; Atkinson, Peter M; Sellner, Johann; Trinka, Eugen; Mühlau, Mark
2016-03-01
A geostatistical approach to characterize MS-lesion patterns based on their geometrical properties is presented. A dataset of 259 binary MS-lesion masks in MNI space was subjected to directional variography. A model function was fit to express the observed spatial variability in x, y, z directions by the geostatistical parameters Range and Sill. Parameters Range and Sill correlate with MS-lesion pattern surface complexity and total lesion volume. A scatter plot of ln(Range) versus ln(Sill), classified by pattern anisotropy, enables a consistent and clearly arranged presentation of MS-lesion patterns based on geometry: the so-called MS-Lesion Pattern Discrimination Plot. The geostatistical approach and the graphical representation of results are considered efficient exploratory data analysis tools for cross-sectional, follow-up, and medication impact analysis.
41 CFR 105-1.109-51 - Arrangement.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Arrangement. 105-1.109-51 Section 105-1.109-51 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION 1-INTRODUCTION 1.1-Regulations System § 105-1...
46 CFR 108.545 - Marine evacuation system launching arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Marine evacuation system launching arrangements. 108.545 Section 108.545 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.545 Marine evacuation system launching...
46 CFR 108.555 - Lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Lifeboat launching and recovery arrangements. 108.555 Section 108.555 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.555 Lifeboat launching and recovery...
46 CFR 108.545 - Marine evacuation system launching arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Marine evacuation system launching arrangements. 108.545 Section 108.545 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.545 Marine evacuation system launching...
46 CFR 108.545 - Marine evacuation system launching arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Marine evacuation system launching arrangements. 108.545 Section 108.545 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.545 Marine evacuation system launching...
46 CFR 108.555 - Lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Lifeboat launching and recovery arrangements. 108.555 Section 108.555 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.555 Lifeboat launching and recovery...
46 CFR 108.555 - Lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Lifeboat launching and recovery arrangements. 108.555 Section 108.555 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.555 Lifeboat launching and recovery...
48 CFR 2301.105-1 - Publication and code ar-rangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Publication and code ar-rangement. 2301.105-1 Section 2301.105-1 Federal Acquisition Regulations System SOCIAL SECURITY ADMINISTRATION GENERAL SOCIAL SECURITY ACQUISITION REGULATION SYSTEM Purpose, Authority, Issuance 2301.105-1...
48 CFR 1.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Publication and code arrangement. 1.105-1 Section 1.105-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1.105-1 Publication and code...
46 CFR 127.260 - Ventilation for accommodations.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation for accommodations. 127.260 Section 127.260... ARRANGEMENTS Particular Construction and Arrangements § 127.260 Ventilation for accommodations. (a) Each... vessel of 100 or more gross tons must be provided with a mechanical ventilation system unless the...
49 CFR 230.111 - Spring rigging.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 49 Transportation 4 2014-10-01 2014-10-01 false Spring rigging. 230.111 Section 230.111... Tenders Trucks, Frames and Equalizing System § 230.111 Spring rigging. (a) Arrangement of springs and equalizers. Springs and equalizers shall be arranged to ensure the proper distribution of weight to the...
49 CFR 230.111 - Spring rigging.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 4 2011-10-01 2011-10-01 false Spring rigging. 230.111 Section 230.111... Tenders Trucks, Frames and Equalizing System § 230.111 Spring rigging. (a) Arrangement of springs and equalizers. Springs and equalizers shall be arranged to ensure the proper distribution of weight to the...
49 CFR 230.111 - Spring rigging.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 49 Transportation 4 2013-10-01 2013-10-01 false Spring rigging. 230.111 Section 230.111... Tenders Trucks, Frames and Equalizing System § 230.111 Spring rigging. (a) Arrangement of springs and equalizers. Springs and equalizers shall be arranged to ensure the proper distribution of weight to the...
49 CFR 230.111 - Spring rigging.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 49 Transportation 4 2012-10-01 2012-10-01 false Spring rigging. 230.111 Section 230.111... Tenders Trucks, Frames and Equalizing System § 230.111 Spring rigging. (a) Arrangement of springs and equalizers. Springs and equalizers shall be arranged to ensure the proper distribution of weight to the...
48 CFR 901.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Publication and code arrangement. 901.105-1 Section 901.105-1 Federal Acquisition Regulations System DEPARTMENT OF ENERGY GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 901.105-1 Publication and code...
48 CFR 1.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Publication and code arrangement. 1.105-1 Section 1.105-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1.105-1 Publication and code...
48 CFR 901.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Publication and code arrangement. 901.105-1 Section 901.105-1 Federal Acquisition Regulations System DEPARTMENT OF ENERGY GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 901.105-1 Publication and code...
48 CFR 1.105-1 - Publication and code arrangement.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Publication and code arrangement. 1.105-1 Section 1.105-1 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL FEDERAL ACQUISITION REGULATIONS SYSTEM Purpose, Authority, Issuance 1.105-1 Publication and code...
Social Actualization: A Theory of Community Living Arrangements and a Practical Utopia.
ERIC Educational Resources Information Center
Slawski, Carl
Characteristics of successful living arrangements in intentional communities are presented by examining kibbutz life. The first section discusses four bases for establishing and maintaining an intentional community: interest, justice, cultural flowering, and love (deep interpersonal and intergroup relationships and religious values). The second…
The dilemma of arranged marriages in people with epilepsy. An expert group appraisal.
Singh, Gagandeep; Pauranik, Apoorva; Menon, Bindu; Paul, Birinder S; Selai, Caroline; Chowdhury, Debashish; Goel, Deepak; Srinivas, H V; Vohra, Hitant; Duncan, John; Khona, Kalyani; Modi, Manish; Mehndiratta, Man Mohan; Kharbanda, Parampreet; Goel, Parveen; Shah, Pravina; Bansal, Rajinder; Addlakha, Renu; Thomas, Sanjeev; Jain, Satish; Shah, Urvashi; Saxena, V S; Sharma, Veena; Nadkarni, V V; Wakankar, Yashoda
2016-08-01
Matrimony remains a challenging psychosocial problem confronting people with epilepsy (PWE). People with epilepsy are less likely to marry; however, their marital prospects are most seriously compromised in arranged marriages. The aim of this study was to document marital prospects and outcomes in PWE going through arranged marriage and to propose optimal practices for counseling PWE contemplating arranged marriage. A MEDLINE search and literature review were conducted, followed by a cross-disciplinary meeting of experts to generate consensus. People with epilepsy experience high levels of felt and enacted stigma in arranged marriages, but the repercussions are heavily biased against women. Hiding epilepsy is common during marital negotiations but may be associated with poor medication adherence, reduced physician visits, and poor marital outcome. Although divorce rates are generally insubstantial in PWE, divorce rates appear to be higher in PWE undergoing arranged marriages. In these marriages, hiding epilepsy during marital negotiations is a risk factor for divorce. In communities in which arranged marriages are common, physicians caring for PWE are best-equipped to counsel them about their marital prospects. Marital plans and aspirations should be discussed with the family of the person with epilepsy in a timely and proactive manner. The benefits of disclosing epilepsy during marital negotiations should be underscored. Copyright © 2016 Elsevier Inc. All rights reserved.
46 CFR 108.550 - Survival craft launching and recovery arrangements: General.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Survival craft launching and recovery arrangements: General. 108.550 Section 108.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.550 Survival craft...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Substitutes for required fittings, material, apparatus, equipment, arrangements, calculations, and tests. 108.105 Section 108.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT General § 108...
46 CFR 108.550 - Survival craft launching and recovery arrangements: General.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Survival craft launching and recovery arrangements: General. 108.550 Section 108.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.550 Survival craft...
46 CFR 108.557 - Free-fall lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Free-fall lifeboat launching and recovery arrangements. 108.557 Section 108.557 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.557 Free-fall lifeboat launching...
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Substitutes for required fittings, material, apparatus, equipment, arrangements, calculations, and tests. 108.105 Section 108.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT General § 108...
46 CFR 108.557 - Free-fall lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Free-fall lifeboat launching and recovery arrangements. 108.557 Section 108.557 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.557 Free-fall lifeboat launching...
46 CFR 108.557 - Free-fall lifeboat launching and recovery arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Free-fall lifeboat launching and recovery arrangements. 108.557 Section 108.557 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.557 Free-fall lifeboat launching...
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Substitutes for required fittings, material, apparatus, equipment, arrangements, calculations, and tests. 108.105 Section 108.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT General § 108...
22 CFR 211.7 - Arrangements for entry and handling in foreign country.
Code of Federal Regulations, 2010 CFR
2010-04-01
... country. 211.7 Section 211.7 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT TRANSFER OF FOOD COMMODITIES FOR FOOD USE IN DISASTER RELIEF, ECONOMIC DEVELOPMENT AND OTHER ASSISTANCE § 211.7 Arrangements for entry and handling in foreign country. (a) Costs at discharge ports. Except as otherwise agreed...
34 CFR 303.526 - Policy for contracting or otherwise arranging for services.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Related to Financial Matters § 303.526 Policy for contracting or otherwise arranging for services. Each... services. 303.526 Section 303.526 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY...
46 CFR 72.20-15 - Construction.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 3 2014-10-01 2014-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...
46 CFR 72.20-15 - Construction.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 3 2012-10-01 2012-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...
46 CFR 72.20-15 - Construction.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 3 2010-10-01 2010-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...
46 CFR 72.20-15 - Construction.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 3 2011-10-01 2011-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...
46 CFR 72.20-15 - Construction.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 3 2013-10-01 2013-10-01 false Construction. 72.20-15 Section 72.20-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 72.20-15 Construction. All crew spaces are to be constructed and arranged...
34 CFR 607.12 - What must be included in cooperative arrangement grant applications?
Code of Federal Regulations, 2013 CFR
2013-07-01
... 34 Education 3 2013-07-01 2013-07-01 false What must be included in cooperative arrangement grant applications? 607.12 Section 607.12 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM How...
34 CFR 607.12 - What must be included in cooperative arrangement grant applications?
Code of Federal Regulations, 2011 CFR
2011-07-01
... 34 Education 3 2011-07-01 2011-07-01 false What must be included in cooperative arrangement grant applications? 607.12 Section 607.12 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM How...
34 CFR 607.12 - What must be included in cooperative arrangement grant applications?
Code of Federal Regulations, 2012 CFR
2012-07-01
... 34 Education 3 2012-07-01 2012-07-01 false What must be included in cooperative arrangement grant applications? 607.12 Section 607.12 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM How...
34 CFR 607.12 - What must be included in cooperative arrangement grant applications?
Code of Federal Regulations, 2014 CFR
2014-07-01
... 34 Education 3 2014-07-01 2014-07-01 false What must be included in cooperative arrangement grant applications? 607.12 Section 607.12 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM How...
34 CFR 607.12 - What must be included in cooperative arrangement grant applications?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 34 Education 3 2010-07-01 2010-07-01 false What must be included in cooperative arrangement grant applications? 607.12 Section 607.12 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING INSTITUTIONS PROGRAM How...
46 CFR 133.45 - Tests and inspections of lifesaving equipment and arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Tests and inspections of lifesaving equipment and arrangements. 133.45 Section 133.45 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS General § 133.45 Tests and inspections of lifesaving equipment and...
46 CFR 133.110 - Survival craft muster and embarkation arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Survival craft muster and embarkation arrangements. 133.110 Section 133.110 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.110 Survival craft muster and embarkation...
46 CFR 133.40 - Evaluation, testing and approval of lifesaving appliances and arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Evaluation, testing and approval of lifesaving appliances and arrangements. 133.40 Section 133.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS General § 133.40 Evaluation, testing and approval of...
46 CFR 133.40 - Evaluation, testing and approval of lifesaving appliances and arrangements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Evaluation, testing and approval of lifesaving appliances and arrangements. 133.40 Section 133.40 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS General § 133.40 Evaluation, testing and approval of...
46 CFR 133.45 - Tests and inspections of lifesaving equipment and arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Tests and inspections of lifesaving equipment and arrangements. 133.45 Section 133.45 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS General § 133.45 Tests and inspections of lifesaving equipment and...
46 CFR 133.110 - Survival craft muster and embarkation arrangements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Survival craft muster and embarkation arrangements. 133.110 Section 133.110 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS LIFESAVING SYSTEMS Requirements for All OSVs § 133.110 Survival craft muster and embarkation...
46 CFR 127.250 - Ventilation for enclosed spaces.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Ventilation for enclosed spaces. 127.250 Section 127.250... ARRANGEMENTS Particular Construction and Arrangements § 127.250 Ventilation for enclosed spaces. (a) Each enclosed space within the vessel must be properly vented or ventilated. Means must be provided for closing...
46 CFR 127.250 - Ventilation for enclosed spaces.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Ventilation for enclosed spaces. 127.250 Section 127.250... ARRANGEMENTS Particular Construction and Arrangements § 127.250 Ventilation for enclosed spaces. (a) Each enclosed space within the vessel must be properly vented or ventilated. Means must be provided for closing...
46 CFR 127.250 - Ventilation for enclosed spaces.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Ventilation for enclosed spaces. 127.250 Section 127.250... ARRANGEMENTS Particular Construction and Arrangements § 127.250 Ventilation for enclosed spaces. (a) Each enclosed space within the vessel must be properly vented or ventilated. Means must be provided for closing...
46 CFR 127.250 - Ventilation for enclosed spaces.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Ventilation for enclosed spaces. 127.250 Section 127.250... ARRANGEMENTS Particular Construction and Arrangements § 127.250 Ventilation for enclosed spaces. (a) Each enclosed space within the vessel must be properly vented or ventilated. Means must be provided for closing...
46 CFR 127.250 - Ventilation for enclosed spaces.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation for enclosed spaces. 127.250 Section 127.250... ARRANGEMENTS Particular Construction and Arrangements § 127.250 Ventilation for enclosed spaces. (a) Each enclosed space within the vessel must be properly vented or ventilated. Means must be provided for closing...
34 CFR 675.47 - Multi-institutional work-colleges arrangements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 34 Education 3 2010-07-01 2010-07-01 false Multi-institutional work-colleges arrangements. 675.47 Section 675.47 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Work-Colleges Program § 675.47...
77 FR 5631 - Reasonable Contract or Arrangement Under Section 408(b)(2)-Fee Disclosure
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-03
... detail below, these disclosures generally must be furnished reasonably in advance of entering into, or... identify the payer of such compensation in advance of service arrangements involving securities purchased... a responsible plan fiduciary to evaluate the reasonableness of such compensation in advance of the...
46 CFR 169.305 - Plans required.
Code of Federal Regulations, 2014 CFR
2014-10-01
... arrangement. (6) Machinery installation. (7) Electrical installation. (8) Fire control plan. (9) Fuel tanks... 46 Shipping 7 2014-10-01 2014-10-01 false Plans required. 169.305 Section 169.305 Shipping COAST... and Arrangement Plans § 169.305 Plans required. (a) Except as provided in paragraphs (b) and (c) of...
46 CFR 169.305 - Plans required.
Code of Federal Regulations, 2012 CFR
2012-10-01
... arrangement. (6) Machinery installation. (7) Electrical installation. (8) Fire control plan. (9) Fuel tanks... 46 Shipping 7 2012-10-01 2012-10-01 false Plans required. 169.305 Section 169.305 Shipping COAST... and Arrangement Plans § 169.305 Plans required. (a) Except as provided in paragraphs (b) and (c) of...
47 CFR 51.701 - Scope of transport and termination pricing rules.
Code of Federal Regulations, 2014 CFR
2014-10-01
... carriers is either a bill-and-keep arrangement, per § 51.713, or an arrangement in which each carrier... rules. 51.701 Section 51.701 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... Telecommunications Traffic § 51.701 Scope of transport and termination pricing rules. (a) Effective December 29, 2011...
26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.
Code of Federal Regulations, 2012 CFR
2012-04-01
..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...
26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.
Code of Federal Regulations, 2014 CFR
2014-04-01
..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...
26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.
Code of Federal Regulations, 2011 CFR
2011-04-01
..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...
26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.
Code of Federal Regulations, 2013 CFR
2013-04-01
..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...
48 CFR 970.1504-1-4 - Types of contracts and fee arrangements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... arrangements. 970.1504-1-4 Section 970.1504-1-4 Federal Acquisition Regulations System DEPARTMENT OF ENERGY... manageable and, therefore, assumable by the contractor. (b) Consistent with the concept of a performance... amount sufficient to motivate performance excellence. (3) However, consistent with concepts of...
Influence of fiber architecture on the elastic an d inelastic response of metal matrix composites
NASA Technical Reports Server (NTRS)
Arnold, Steven M.; Pindera, Marek-Jerzy; Wilt, Thomas E.
1995-01-01
This three part paper focuses on the effect of fiber architecture (i.e., shape and distribution) on the elastic and inelastic response of metal matrix composites. The first part provides an annotative survey of the literature, presented as a historical perspective, dealing with the effects of fiber shape and distribution on the response of advanced polymeric matrix and metal matrix composites. Previous investigations dealing with both continuously and discontinuously reinforced composites are included. A summary of the state-of-the-art will assist in defining new directions in this quickly reviving area of research. The second part outlines a recently developed analytical micromechanics model that is particularly well suited for studying the influence of these effects on the response of metal matrix composites. This micromechanics model, referred to as the generalized method of cells (GMC), is capable of predicting the overall, inelastic behavior of unidirectional, multi-phased composites given the properties of the constituents. In particular, the model is sufficiently general to predict the response of unidirectional composites reinforced by either continuous or discontinuous fibers with different inclusion shapes and spatial arrangements in the presence of either perfect or imperfect interfaces and/or interfacial layers. Recent developments regarding this promising model, as well as directions for future enhancements of the model's predictive capability, are included. Finally, the third pan provides qualitative results generated using GMC for a representative titanium matix composite system, SCS-6/TlMETAL 21S. Results are presented that correctly demonstrate the relative effects of fiber arrangement and shape on the longitudinal and transverse stress-strain and creep response, with both strong and weak fiber/matrix interfacial bonds. The fiber arrangements include square, square diagonal, hexagonal and rectangular periodic arrays, as well as a random array. The fiber shapes include circular, square and cross-shaped cross sections. The effect of fiber volume fraction on the observed stress-strain response is also discussed, as the thus-far poorly documented strain rate sensitivity effect. In addition to the well documented features of architecture dependent response of continuously reinforced two-phase MMC's, new results involving continuous multi-phase internal architectures are presented. Specifically, stress strain and creep response of composites with different size fibers having different internal arrangements and bond strengths are investigated with the aim of determining the feasibility of using this approach to enhance the transverse toughness and creep resistance of TMC's.
Riediger, Natalie Diane; Shooshtari, Shahin; Moghadasian, Mohammed Hassan
2007-09-01
Poor dietary habits may increase risk for obesity and chronic diseases among Canadian adolescents. The aims of the present study were to: (a) establish the patterns of fruit and vegetable intake by Canadian adolescents, and (b) identify the impact of sociodemographic factors-including age, household income, household education, ethnicity, living arrangement, and location-on the pattern of fruit and vegetable intake in this population. This is a cross-sectional study using the data from the Canadian Community Health Survey, Cycle 2.1, Public Use File. The survey used questions similar to a food frequency questionnaire. Total fruit and vegetable intake of 18,524 Canadian adolescents (12 to 19 years old) was cross-tabulated between two age groups (12 to 14 years old [n=7,410] and 15 to 19 years old [n=11,114]) by sex, level of household education, total household income, ethnicity, living arrangement, and geographical location. The data revealed that a 38.3% of Canadian adolescents in this study consumed fruits and vegetables five to 10 times per day; fewer older adolescents (15- to 19-year-olds) reported eating fruits and vegetables at that frequency as compared with the younger subgroup (12- to 14-year-olds) (P<0.001). Household education and income independently had a significant (P<0.001) positive impact on fruit and vegetable consumption. Females reported a significantly (P<0.05) higher frequency of intake than did males. Adolescents living in homes with only one parent reported a significantly (P<0.005) lower frequency of intake, as compared with adolescents living with two parents. These results may help to identify adolescent groups at risk for poor eating habits and support the implementation of programs to encourage higher fruit and vegetable intakes.
NASA Astrophysics Data System (ADS)
Braun, Jean
1994-08-01
We have developed a three-dimensional finite element model to study wrench deformation of the crust regarded as an elasto-plastic material obeying Murrell's extension of Griffith's failure criterion. Numerical experiments using this model predict that the imposed basal wrenching is accommodated by an array of oblique Riedel-like shears and Y-shears (parallel to the direction of wrenching). The partitioning of deformation between the two types of structure depends on the width of the zone of imposed basal wrenching and the existence of a component of deformation in the x-direction (normal to the direction of wrenching). The Riedel shears are arranged in spiral-like structures that root into the basal wrench zone. In cross-section, the Riedel shears resemble wedge-shaped flower structures similar to those often observed in seismic cross-sections. The 'polarity' of the flower structures is positive (or palm-tree-like) in transpression experiments and negative (or tulip-like) in transtension experiments. The orientation of the Riedel shears throughout the crust obeys Mohr's hypothesis for incipient faulting combined with Murrell's failure criterion. The model also predicts plastic dilatancy inversely proportional to the square root of the confining pressure; this result agrees qualitatively with field observations and the results of sand-box experiments and quantitatively with direct measurement of dilatancy during high-pressure rock-deformation experiments.
Retirement planning and work-related variables in Chinese older nurses: A cross-sectional study.
Liu, Peng-Cheng; Zhang, Huan-Huan; Zhang, Mei-Ling; Ying, Jie; Shi, Ying; Wang, Shou-Qi; Sun, Jiao
2018-03-01
To explore the situation of older nurses approaching retirement with regard to their retirement planning, and the relationship of their retirement planning behaviour with the job environment and job satisfaction under their current employment arrangements and other work-related variables. Nurse shortage has become a global phenomenon that can be alleviated by retaining older nurses in service. The Chinese government proposed the "Incremental Delay Retirement Age Policy." However, older nurses face delayed retirement but lack retirement plans. A cross-sectional questionnaire survey was conducted among a convenience sample of older retiring nurses (n = 152; 84.92% response rate) recruited from every department of four large general hospitals in Changchun, Jilin Province from June to August 2016. The majority of the respondents presented poor retirement planning (n = 122, 80.3%). The independent variables of information exchange with patients, teamwork and personal growth and development explained approximately 16.6% of the variance in retirement planning. Nurse-patient communication and personal growth and development can promote retirement planning, but teamwork is negatively related to retirement planning. Retirement planning by Chinese older nurses is related to certain work-related variables. However, many other work-related variables were not associated with retirement planning and require further research. Overall, Chinese older retiring nurses must improve their retirement planning practices. © 2017 John Wiley & Sons Ltd.
Wang, Hui; Deng, Jianxiong; Zhou, Xiaolan; Lu, Ciyong; Huang, Jinghui; Huang, Guoliang; Gao, Xue; He, Yuan
2014-08-01
The objective of this study was to examine the prevalence of the nonmedical use of prescription medicines (NMUPM) and the association between NMUPM and demographic, family and school factors. A cross-sectional study was conducted from 2007 to 2009. A total of 21,672 middle and high school students were surveyed in seven cities of Guangdong Province. Self-reported NMUPM and information regarding family and school factors were collected. Multilevel logistic regression analyses were used to explore potentially influential factors. Of the total sample, the mean age was 16 (±1.9) years. Approximately 6.0% of respondents reported lifetime NMUPM. The most common nonmedically used prescription drug among NMUPM users was scattered analgesics, at approximately 3.9%, followed by cough medicine with codeine (2.1%). Multilevel logistic regression analysis indicated that living arrangements, available money, social friends, and smoking were significantly correlated with NMUPM among boys and girls. Academic achievement and family relationships were only significantly correlated with NMUPM among girls, and communication with parents was only associated with NMUPM among boys. These results indicate that NMUPM represented a considerable problem for particular subgroups of adolescents. A well-established surveillance system and target intervention programs are needed given the potential long-term negative outcomes of NMUPM. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Rao, D. V.; Takeda, T.; Itai, Y.; Akatsuka, T.; Seltzer, S. M.; Hubbell, J. H.; Cesareo, R.; Brunetti, A.; Gigante, G. E.
Atomic Rayleigh scattering cross-sections for low, medium and high Z atoms are measured in vacuum using X-ray tube with a secondary target as an excitation source instead of radioisotopes. Monoenergetic Kα radiation emitted from the secondary target and monoenergetic radiation produced using two secondary targets with filters coupled to an X-ray tube are compared. The Kα radiation from the second target of the system is used to excite the sample. The background has been reduced considerably and the monochromacy is improved. Elastic scattering of Kα X-ray line energies of the secondary target by the sample is recorded with Hp Ge and Si (Li) detectors. A new approach is developed to estimate the solid angle approximation and geometrical efficiency for a system with experimental arrangement using X-ray tube and secondary target. The variation of the solid angle is studied by changing the radius and length of the collimators towards and away from the source and sample. From these values the variation of the total solid angle and geometrical efficiency is deduced and the optimum value is used for the experimental work. The efficiency is larger because the X-ray fluorescent source acts as a converter. Experimental results based on this system are compared with theoretical estimates and good agreement is observed in between them.
NASA Technical Reports Server (NTRS)
Monta, W. J.
1980-01-01
The effects of conventional and square stores on the longitudinal aerodynamic characteristics of a fighter aircraft configuration at Mach numbers of 1.6, 1.8, and 2.0 was investigated. Five conventional store configurations and six arrangements of a square store configuration were studied. All configurations of the stores produced small, positive increments in the pitching moment throughout the angle-of-attack range, but the configuration with area ruled wing tanks also had a slight decrease on stability at the higher angles of attack. There were some small changes in lift coefficient because of the addition of the stores, causing the drag increment to vary with the lift coefficient. As a result, there were corresponding changes in the increments of the maximum lift drag ratios. The store drag coefficient based on the cross sectional area of the stores ranged from a maximum of 1.1 for the configuration with three Maverick missiles to a minimum of about .040 for the two MK-84 bombs and the arrangements with four square stores touching or two square stores in tandem. Square stores located side by side yielded about 0.50 in the aft position compared to 0.74 in the forward position.
LIGHT WATER MODERATED NEUTRONIC REACTOR
Christy, R.F.; Weinberg, A.M.
1957-09-17
A uranium fuel reactor designed to utilize light water as a moderator is described. The reactor core is in a tank at the bottom of a substantially cylindrical cross-section pit, the core being supported by an apertured grid member and comprised of hexagonal tubes each containing a pluralily of fuel rods held in a geometrical arrangement between end caps of the tubes. The end caps are apertured to permit passage of the coolant water through the tubes and the fuel elements are aluminum clad to prevent corrosion. The tubes are hexagonally arranged in the center of the tank providing an amulus between the core and tank wall which is filled with water to serve as a reflector. In use, the entire pit and tank are filled with water in which is circulated during operation by coming in at the bottom of the tank, passing upwardly through the grid member and fuel tubes and carried off near the top of the pit, thereby picking up the heat generated by the fuel elements during the fission thereof. With this particular design the light water coolant can also be used as the moderator when the uranium is enriched by fissionable isotope to an abundance of U/sup 235/ between 0.78% and 2%.
Suh, Hyo Seon; Chen, Xuanxuan; Rincon-Delgadillo, Paulina A.; ...
2016-04-22
Grazing-incidence small-angle X-ray scattering (GISAXS) is increasingly used for the metrology of substrate-supported nanoscale features and nanostructured films. In the case of line gratings, where long objects are arranged with a nanoscale periodicity perpendicular to the beam, a series of characteristic spots of high-intensity (grating truncation rods, GTRs) are recorded on a two-dimensional detector. The intensity of the GTRs is modulated by the three-dimensional shape and arrangement of the lines. Previous studies aimed to extract an average cross-sectional profile of the gratings, attributing intensity loss at GTRs to sample imperfections. Such imperfections are just as important as the average shapemore » when employing soft polymer gratings which display significant line-edge roughness. Herein are reported a series of GISAXS measurements of polymer line gratings over a range of incident angles. Both an average shape and fluctuations contributing to the intensity in between the GTRs are extracted. Lastly, the results are critically compared with atomic force microscopy (AFM) measurements, and it is found that the two methods are in good agreement if appropriate corrections for scattering from the substrate (GISAXS) and contributions from the probe shape (AFM) are accounted for.« less
Life goals of people with disabilities due to neurological disorders.
Sivaraman Nair, K P; Wade, Derick T
2003-08-01
To identify the life goals of people with long-term neurological disabilities and to correlate them with measures of disability. Cross-sectional descriptive study. Centre for continuing disability management Patients with static or progressive neurological disorders. Survey using questionnaires and disability scales. Life goals were identified with a life goals questionnaire. Subjects were also assessed using the Barthel Index, Rivermead Extended Activities of Daily Living Index, Rivermead Mobility Index, Short Orientation Memory Concentration test and Hospital Anxiety and Depression Scale. Ninety-three subjects participated in the study. The frequency with which goals were chosen as extremely important was: family 64; personal care 59; residential arrangements 58; partner 53; social contacts 30; financial status 29; leisure 26; religion 22; and work 19. Positive correlation was noted between stated importance of: personal care and independence in ADL; work and independence; partner and cognitive ability; religion and age; and financial status and anxiety. There was negative correlation between grades of personal care and depression, work and age, residential arrangements and RMI, and social contact and anxiety and depression. Depressed patients rated fewer goals as being of extreme importance. People with disabilities attach great significance to relationships and personal care. Grades of life goals correlated with measures of disability, cognition and emotion.
Black and brown pigment gallstones differ in microstructure and microcomposition.
Malet, P F; Takabayashi, A; Trotman, B W; Soloway, R D; Weston, N E
1984-01-01
The two subtypes of pigment gallstones, black and brown stones, differ in chemical composition and pathogenesis. We examined a black bilirubinate stone and a black phosphate stone (which represented opposite ends of the compositional spectrum of black noncarbonate stones), a black carbonate stone, and a brown pigment stone using scanning electron microscopy and microchemical techniques to determine if stone microstructure and microcomposition reflected different patterns of formation. The cross-sectional surfaces of the black bilirubinate and black phosphate stones were smooth and homogenous. Electron probe microanalysis demonstrated high concentrations of sulfur and copper in the center of the black bilirubinate stone; sulfur was in a low valence state consistent with disulfide linkages in proteins. The brown stone was rough-surfaced with lamellated bands on cross-section. The lighter-colored bands in this stone contained virtually all of the detected calcium palmitate, while the darker sections contained much more calcium bilirubinate. Plasma oxygen etching demonstrated a network of protein interdigitating with calcium bilirubinate salts in the black bilirubinate and black phosphate stones but not in the black carbonate or brown stones. Argon ion etching demonstrated that calcium bilirubinate was in a closely packed rod-shaped arrangement in all three black stones but not in the brown stone. We conclude that the marked differences in structure and composition between the black noncarbonate and brown pigment gallstones support the hypothesis that the two major pigment gallstone types form by different mechanisms. In addition, the layered structures of the black carbonate and brown stones suggest that stone growth is affected by cyclic changes in biliary composition.
Compression strength of composite primary structural components
NASA Technical Reports Server (NTRS)
Johnson, Eric R.
1994-01-01
The linear elastic response is determined for an internally pressurized, long circular cylindrical shell stiffened on the inside by a regular arrangement of identical stringers and identical rings. Periodicity of this configuration permits the analysis of a portion of the shell wall centered over a generic stringer-ring joint; i.e., a unit cell model. The stiffeners are modeled as discrete beams, and the stringer is assumed to have a symmetrical cross section and the ring an asymmetrical section. Asymmetery causes out-of-plane bending and torsion of the ring. Displacements are assumed as truncated double Fourier series plus simple terms in the axial coordinate to account for the closed and pressure vessel effect (a non-periodic effect). The interacting line loads between the stiffeners and the inside shell wall are Lagrange multipliers in the formulation, and they are also assumed as truncated Fourier series. Displacement continuity constraints between the stiffeners and shell along the contact lines are satisfied point-wise. Equilibrium is imposed by the principle of virtual work. A composite material crown panel from the fuselage of a large transport aircraft is the numerical example. The distributions of the interacting line loads, and the out-of-plane bending moment and torque in the ring, are strongly dependent on modeling the deformations due to transverse shear and cross-sectional warping of the ring in torsion. This paper contains the results from the semiannual report on research on 'Pressure Pillowing of an Orthogonally Stiffened Cylindrical Shell'. The results of the new work are illustrated in the included appendix.
Reproductive biology characteristic of Jatropha curcas (Euphorbiaceae).
Wang, Xiu-Rong; Ding, Gui-Jie
2012-12-01
Jatropha curcas belongs to family of Euphorbiaceae, and is an important biological tree species for diesel production. The current descriptions of the phenotypic traits for male and female flowers are not comprehensive and there have been no reports about the process of J. curcas from pollen germination on stigma to pollen tubes conducting fertilization after entering the ovary and ovule. To assess this, experiments were undertaken to study the reproductive biology characteristic of J. curcas in Guiyang Guizhou Province, China. Floral structure and pollen germination process were described in detail and the breeding system was determined. The results showed that flower of J. curcas was both unisexual and monoecious, with a flowering phase between April-November. Both female and male flowers have five petals in contorted arrangement and five calyxes in imbricated arrangement. Female flower originated from bisexual flower finally formed unisexual flowers as the stamen ceased growth in different period. The pistil had 3-5 styles, connected at base and separated into 3-5 stigmas on the top. Each stigma had 2-4 lobes. The styles were hollow. The pollen germinated on the surface of the stigma, is then transported via the vascular tissues, which was arranged in bundles, and finally channeled through the micropyle to enter the blastula. The pollen tube was shaped in a long uneven cylinder. The top end of it became swollen and formed a small round hole for the purpose of releasing sperm nuclei while the pollen tube itself was growing and extending. Estimation of out-crossing index and artificial pollination experiments indicated that J. curcas was capable of both self-pollination and cross-pollination. The germination speed of the pollen on the stigma did not differ so much between the one by self-pollination and the one by cross-pollination, and the pollen from the two different sources could both reach the ovary within one day. Both artificial pollination test and out-crossing index have indicated that: J. curcas has both self-pollination and cross-pollination systems.
46 CFR 108.553 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Survival craft launching and recovery arrangements using falls and a winch. 108.553 Section 108.553 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.553 Survival...
46 CFR 108.553 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Survival craft launching and recovery arrangements using falls and a winch. 108.553 Section 108.553 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Lifesaving Equipment § 108.553 Survival...
46 CFR 117.130 - Stowage of survival craft.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of survival craft. 117.130 Section 117.130... AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a float-free link permanently...
46 CFR 180.130 - Stowage of survival craft.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Stowage of survival craft. 180.130 Section 180.130... TONS) LIFESAVING EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 180.130 Stowage of survival craft. (a) Each survival craft must be: (1) Secured to the vessel by a painter with a...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests. 197.206 Section 197.206 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations General § 197.206...
46 CFR 32.63-8 - Alternative arrangements-B/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 1 2010-10-01 2010-10-01 false Alternative arrangements-B/ALL. 32.63-8 Section 32.63-8 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL..., and Carrying Certain Dangerous Bulk Cargoes § 32.63-8 Alternative arrangements—B/ALL. (a) Alternative...
22 CFR 102.11 - Arranging for the payment of expenses attendant upon an accident.
Code of Federal Regulations, 2011 CFR
2011-04-01
... upon an accident. 102.11 Section 102.11 Foreign Relations DEPARTMENT OF STATE ECONOMIC AND OTHER FUNCTIONS CIVIL AVIATION United States Aircraft Accidents Abroad § 102.11 Arranging for the payment of expenses attendant upon an accident. (a) The Department of State has no funds from which expenses attendant...
34 CFR 607.25 - What priority does the Secretary use in awarding cooperative arrangement grants?
Code of Federal Regulations, 2014 CFR
2014-07-01
... 34 Education 3 2014-07-01 2014-07-01 false What priority does the Secretary use in awarding cooperative arrangement grants? 607.25 Section 607.25 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...
34 CFR 607.25 - What priority does the Secretary use in awarding cooperative arrangement grants?
Code of Federal Regulations, 2011 CFR
2011-07-01
... 34 Education 3 2011-07-01 2011-07-01 false What priority does the Secretary use in awarding cooperative arrangement grants? 607.25 Section 607.25 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...
34 CFR 607.25 - What priority does the Secretary use in awarding cooperative arrangement grants?
Code of Federal Regulations, 2013 CFR
2013-07-01
... 34 Education 3 2013-07-01 2013-07-01 false What priority does the Secretary use in awarding cooperative arrangement grants? 607.25 Section 607.25 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...
34 CFR 607.25 - What priority does the Secretary use in awarding cooperative arrangement grants?
Code of Federal Regulations, 2012 CFR
2012-07-01
... 34 Education 3 2012-07-01 2012-07-01 false What priority does the Secretary use in awarding cooperative arrangement grants? 607.25 Section 607.25 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...
34 CFR 607.25 - What priority does the Secretary use in awarding cooperative arrangement grants?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 34 Education 3 2010-07-01 2010-07-01 false What priority does the Secretary use in awarding cooperative arrangement grants? 607.25 Section 607.25 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STRENGTHENING...
46 CFR 133.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2012 CFR
2012-10-01
... falls and a winch. 133.153 Section 133.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... launching and recovery arrangements using falls and a winch. Survival craft launching and recovery...) Each fall wire must be of rotation-resistant and corrosion-resistant steel wire rope. (b) The breaking...
46 CFR 108.553 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2013 CFR
2013-10-01
... falls and a winch. 108.553 Section 108.553 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... craft launching and recovery arrangements using falls and a winch. Survival craft launching and recovery...) Each fall wire must be of rotation-resistant and corrosion-resistant steel wire rope. (b) The breaking...
46 CFR 133.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2014 CFR
2014-10-01
... falls and a winch. 133.153 Section 133.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... launching and recovery arrangements using falls and a winch. Survival craft launching and recovery...) Each fall wire must be of rotation-resistant and corrosion-resistant steel wire rope. (b) The breaking...
46 CFR 133.153 - Survival craft launching and recovery arrangements using falls and a winch.
Code of Federal Regulations, 2013 CFR
2013-10-01
... falls and a winch. 133.153 Section 133.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... launching and recovery arrangements using falls and a winch. Survival craft launching and recovery...) Each fall wire must be of rotation-resistant and corrosion-resistant steel wire rope. (b) The breaking...
48 CFR 2501.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Arrangement of regulations. 2501.104-2 Section 2501.104-2 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... material in the FAR, Parts 70 and up are used by the NSFAR. Where the subject matter in the FAR requires no...
48 CFR 2501.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Arrangement of regulations. 2501.104-2 Section 2501.104-2 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... material in the FAR, Parts 70 and up are used by the NSFAR. Where the subject matter in the FAR requires no...
48 CFR 2501.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Arrangement of regulations. 2501.104-2 Section 2501.104-2 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... material in the FAR, Parts 70 and up are used by the NSFAR. Where the subject matter in the FAR requires no...
48 CFR 2501.104-2 - Arrangement of regulations.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Arrangement of regulations. 2501.104-2 Section 2501.104-2 Federal Acquisition Regulations System NATIONAL SCIENCE FOUNDATION... material in the FAR, Parts 70 and up are used by the NSFAR. Where the subject matter in the FAR requires no...
22 CFR 211.7 - Arrangements for entry and handling in foreign country.
Code of Federal Regulations, 2011 CFR
2011-04-01
... country to a designated inland point of entry in the recipient country shall be arranged by the... country. 211.7 Section 211.7 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT TRANSFER OF FOOD... for entry and handling in foreign country. (a) Costs at discharge ports. Except as otherwise agreed...
Circuit topology of self-interacting chains: implications for folding and unfolding dynamics.
Mugler, Andrew; Tans, Sander J; Mashaghi, Alireza
2014-11-07
Understanding the relationship between molecular structure and folding is a central problem in disciplines ranging from biology to polymer physics and DNA origami. Topology can be a powerful tool to address this question. For a folded linear chain, the arrangement of intra-chain contacts is a topological property because rearranging the contacts requires discontinuous deformations. Conversely, the topology is preserved when continuously stretching the chain while maintaining the contact arrangement. Here we investigate how the folding and unfolding of linear chains with binary contacts is guided by the topology of contact arrangements. We formalize the topology by describing the relations between any two contacts in the structure, which for a linear chain can either be in parallel, in series, or crossing each other. We show that even when other determinants of folding rate such as contact order and size are kept constant, this 'circuit' topology determines folding kinetics. In particular, we find that the folding rate increases with the fractions of parallel and crossed relations. Moreover, we show how circuit topology constrains the conformational phase space explored during folding and unfolding: the number of forbidden unfolding transitions is found to increase with the fraction of parallel relations and to decrease with the fraction of series relations. Finally, we find that circuit topology influences whether distinct intermediate states are present, with crossed contacts being the key factor. The approach presented here can be more generally applied to questions on molecular dynamics, evolutionary biology, molecular engineering, and single-molecule biophysics.
46 CFR Section 1 - What this order does.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 8 2014-10-01 2014-10-01 false What this order does. Section 1 Section 1 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION A-NATIONAL SHIPPING AUTHORITY AUTHORITY AND... AGREEMENT Section 1 What this order does. This order outlines General Agents' limited authority to arrange...
46 CFR Section 1 - What this order does.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 8 2013-10-01 2013-10-01 false What this order does. Section 1 Section 1 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION A-NATIONAL SHIPPING AUTHORITY AUTHORITY AND... AGREEMENT Section 1 What this order does. This order outlines General Agents' limited authority to arrange...
46 CFR Section 1 - What this order does.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 8 2010-10-01 2010-10-01 false What this order does. Section 1 Section 1 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION A-NATIONAL SHIPPING AUTHORITY AUTHORITY AND... AGREEMENT Section 1 What this order does. This order outlines General Agents' limited authority to arrange...
Federal Programs Impact-Nondiscrimination-Section 504
ERIC Educational Resources Information Center
Stadtmueller, John H.
1978-01-01
An administrator summarizes basic implications for special education of Section 504 of the Rehabilitation Act of 1973 regarding employment of handicapped persons, building facility arrangements, and programming for exceptional students. (CL)
An inventory of four-dimensional data sets for the earth sciences
NASA Technical Reports Server (NTRS)
Gregory, Terri
1989-01-01
The wide variety of data available to the diligent researcher and the myriad paths to obtaining it are emphasized. This inventory is an attempt to make accessible much of the four-dimensional data available in the world. In this quick-look catalog are listed separate data sets (Data Sets sections), sources of data including centers and large data bases (Sources section), and some data expected to be available in the future (Future Data section). In the Data Sets section, individual data sets are arranged alphabetically by institution, with those archived in the U.S.A. listed first, followed by those found elsewhere. The Sources section includes large data bases, centers, and directories. Sources are arranged alphabetically by country. This section is followed by a Future Data section which is a collection of data sets, experiments, and other future developments of which we are cognizant. A collection of further information and order blanks provided by some of the archiving institutions are presented in the appendix.
Cyclo[n]pyrroles: Size and Site Specific Binding to G-Quadruplexes
Baker, Erin Shammel; Lee, Jeong T.
2014-01-01
Inhibiting the enzyme telomerase by stabilizing the G-quadruplex has potential in anticancer drug design. Diprotonated cyclo[n]pyrroles represent a set of expanded porphyrin analogues with structures similar to telomestatin, a natural product known to bind to and stabilize G-quadruplexes. As a first step towards testing whether cyclo[n]pyrroles display a similar function, a series of diprotonated cyclo[n]pyrroles (where n = 6, 7 and 8) was each added to the human telomere repeat sequence d(T2AG3)4 and examined with mass spectrometry, ion mobility and molecular dynamics calculations. Nano-ESI-MS indicated that the smaller the cyclo[n]pyrrole, the stronger it binds to the telomeric sequence. It was also found that cyclo[6]pyrrole bound to d(T2AG3)4 better than octaethylporphyrin, a finding rationalized by cyclo[6]pyrrole having a +2 charge, while octaethylporphyrin bears no charge. Ion mobility measurements were used to measure the collision cross section of each d(T2AG3)4/cyclo[n]pyrrole complex. Only one peak was observed in the arrival time distributions for all complexes and the experimental cross sections indicated that only structures with d(T2AG3)4 in an antiparallel G-quadruplex arrangement and each cyclo[n]pyrrole externally stacked below the G-quartets occur under these experimental conditions. When the cyclo[n]pyrroles were intercalated or nonspecifically bound to the quadruplex or if different conformations than antiparallel were considered for d(T2AG3)4, the theoretical cross sections did not match experiment. On this basis, it is inferred that 1) external stacking represents the dominant binding mode for the interaction of cyclo[n]pyrroles with d(T2AG3)4 and 2) the overall size and charge of the cyclo[n]pyrroles play important roles in defining the binding strength. PMID:16492050
Hearing loss in workers exposed to epoxy adhesives and noise: a cross-sectional study.
Yang, Hsiao-Yu; Shie, Ruei-Hao; Chen, Pau-Chung
2016-02-18
Epoxy adhesives contain organic solvents and are widely used in industry. The hazardous effects of epoxy adhesives remain unclear. The objective of this study was to investigate the risk of hearing loss among workers exposed to epoxy adhesives and noise. Cross-sectional study. For this cross-sectional study, we recruited 182 stone workers who were exposed to both epoxy adhesives and noise, 89 stone workers who were exposed to noise only, and 43 workers from the administrative staff who had not been exposed to adhesives or noise. We obtained demographic data, occupational history and medical history through face-to-face interviews and arranged physical examinations and pure-tone audiometric tests. We also conducted walk-through surveys in the stone industry. A total of 40 representative noise assessments were conducted in 15 workplaces. Air sampling was conducted at 40 workplaces, and volatile organic compounds were analysed using the Environmental Protection Agency (EPA) TO-15 method. The mean sound pressure level was 87.7 dBA (SD 9.9). The prevalence of noise-induced hearing loss was considerably increased in the stone workers exposed to epoxy adhesives (42%) compared with the stone workers who were not exposed to epoxy adhesives (21%) and the administrative staff group (9.3%). A multivariate logistic regression analysis revealed that exposure to epoxy adhesives significantly increased the risk of hearing loss between 2 and 6 kHz after adjusting for age. Significant interactions between epoxy adhesives and noise and hearing impairment were observed at 3, 4 and 6 kHz. Epoxy adhesives exacerbate hearing impairment in noisy environments, with the main impacts occurring in the middle and high frequencies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Temperature and deflection data from the asymmetric heating of cross-ply composite tubes
NASA Technical Reports Server (NTRS)
Hyer, Michael W.; Cooper, David E.; Tompkins, S. S.; Cohen, David
1987-01-01
Data generated while heating several cross-ply graphite-epoxy tubes on one side, along their lengths, and cooling them on the other side are presented. This heating arrangement produces a circumferential temperature gradient, and the data show that the gradient can be represented by a cosinusoidal temperature distribution. The thermally induced bending deflections caused by the temperature gradient are also presented.
Roof Overhangs for Solar Houses
NASA Technical Reports Server (NTRS)
Gracey, W.
1985-01-01
Convenient graphical method determines both width and vertical position of overhangs for standard wall section having "typical" window arrangement. Overhangs for this wall section determined for two extremes of latitude in United States.
Wind-Tunnel Investigation of an NACA 23021 Airfoil with a 0.32-Airfoil-Chord Double Slotted Flap
NASA Technical Reports Server (NTRS)
Fischel, Jack; Riebe, John M
1944-01-01
An investigation was made in the LMAL 7- by 10-foot wind tunnel of a NACA 23021 airfoil with a double slotted flap having a chord 32 percent of the airfoil chord (0.32c) to determine the aerodynamic section characteristics with the flaps deflected at various positions. The effects of moving the fore flap and rear flap as a unit and of deflecting or removing the lower lip of the slot were also determined. Three positions were selected for the fore flap and at each position the maximum lift of the airfoil was obtained with the rear flap at the maximum deflection used at that fore-flap position. The section lift of the airfoil increased as the fore flap was extended and maximum lift was obtained with the fore flap deflected 30 deg in the most extended position. This arrangement provided a maximum section lift coefficient of 3.31, which was higher than the value obtained with either a 0.2566c or a 0.40c single-slotted-flap arrangement and 0.25 less than the value obtained with a 0.4c double-slotted-flap arrangement on the same airfoil. The values of the profile-drag coefficient obtained with the 0.32c double slotted flap were larger than those for the 0.2566c or 0.40c single slotted flaps for section lift coefficients between 1.0 and approximately 2.7. At all values of the section lift coefficient above 1.0, the 0.40c double slotted flap had a lower profile drag than the 0.32c double slotted flap. At various values of the maximum section lift coefficient produced by various flap defections, the 0.32c double slotted flap gave negative section pitching-moment coefficients that were higher than those of other slotted flaps on the same airfoil. The 0.32c double slotted flap gave approximately the same maximum section lift coefficient as, but higher profile-drag coefficients over the entire lift range than, a similar arrangement of a 0.30c double slotted flap on an NACA 23012 airfoil.
Experimental Investigation of Compressed Thin-Walled Steel Members
NASA Astrophysics Data System (ADS)
Juhás, Pavol; Juhásová Šenitková, Ingrid
2017-10-01
The paper presents fundamental information about realized experimental-theoretical research to determinate the load-carrying capacities for thin-walled compressed steel members with quasi-homogenous and hybrid cross-sections. The webs of such members are stressed in the elastic-plastic region. This continuous research joins on previous research of the first author of the paper. The aim of this research is to investigate and analyse the elastic-plastic post-critical behaviour of thin web and its interaction with flanges. The experimental program, test members and their geometrical parameters and material properties are evident from table 1 and table 2 as well as from figure 1 and figure 2. The test arrangement and failures of the test members are illustrated on Figures 3, 4 and 5. Some partial results are presented in Table 3 of the paper, too.
Application of time–frequency wavelet analysis in the reflectometry of thin films
DOE Office of Scientific and Technical Information (OSTI.GOV)
Astaf’ev, S. B., E-mail: bard@crys.ras.ru; Shchedrin, B. M.; Yanusova, L. G.
2017-03-15
The application of time–frequency wavelet analysis for solving the reflectometry inverse problem is considered. It is shown that a simultaneous transform of specular intensity curve, depending on the grazing angle and spatial frequency, allows one to determine not only the thickness but also the alteration order of individual regions (layers) with characteristic behavior of electron density. This information makes it possible to reconstruct the electron density profile in the film cross section as a whole (i.e., to solve the inverse reflectometry problem). The application of the time–frequency transform is illustrated by examples of reconstructing (based on X-ray reflectivity data) themore » layer alternation order in models of two-layer films with inverted arrangement of layers and a four-layer film on a solid substrate.« less
Cooling circuit for and method of cooling a gas turbine bucket
Jacala, Ariel C. P.
2002-01-01
A closed internal cooling circuit for a gas turbine bucket includes axial supply and return passages in the dovetail of the bucket. A first radial outward supply passage provides cooling medium to and along a passageway adjacent the leading edge and then through serpentine arranged passageways within the airfoil to a chamber adjacent the airfoil tip. A second radial passage crosses over the radial return passage for supplying cooling medium to and along a pair of passageways along the trailing edge of the airfoil section. The last passageway of the serpentine passageways and the pair of passageways communicate one with the other in the chamber for returning spent cooling medium radially inwardly along divided return passageways to the return passage. In this manner, both the leading and trailing edges are cooled using the highest pressure, lowest temperature cooling medium.
Satir, Peter
1963-01-01
Upon excision into spring water, the lateral cilia of the gill of the freshwater mussel Elliptio complanatus (Solander) stop beating, but 0.04 M potassium ion can activate the gill so that these cilia again beat with metachronal rhythm. One per cent osmium tetroxide quickly pipetted onto a fully activated gill fixes the lateral cilia in a pattern that preserves the form and arrangement of the metachronal wave, and permits the cilia to be studied with the electron microscope in all stages of their beat cycle. Changes are seen in the fixed active preparation that are not present in the inactive control, i.e., in the packing of the cilia, the position of the axis of the ciliary cross-section, and the diameter of the ring of peripheral filaments. Analysis of these parameters may lead to new correlations between ciliary fine structure and function. PMID:14079494
Studies on scintillating fiber response
NASA Astrophysics Data System (ADS)
Albers, D.; Bisplinghoff, J.; Bollmann, R.; Büßer, K.; Cloth, P.; Diehl, O.; Dohrmann, F.; Drüke, V.; Engelhardt, H. P.; Ernst, J.; Eversheim, P. D.; Filges, D.; Gasthuber, M.; Gebel, R.; Greiff, J.; Groß, A.; Groß-Hardt, R.; Heine, A.; Heider, S.; Hinterberger, F.; Igelbrink, M.; Jahn, R.; Jeske, M.; Langkau, R.; Lindlein, J.; Maier, R.; Maschuw, R.; Mayer-Kuckuk, T.; Mertler, G.; Metsch, B.; Mosel, F.; Müller, M.; Münstermann, M.; Paetz gen. Schieck, H.; Petry, H. R.; Prasuhn, D.; Rohdjeß, H.; Rosendaal, D.; Roß, U.; von Rossen, P.; Scheid, H.; Schirm, N.; Schulz-Rojahn, M.; Schwandt, F.; Scobel, W.; Steeg, B.; Sterzenbach, G.; Trelle, H. J.; Wellinghausen, A.; Wiedmann, W.; Woller, K.; Ziegler, R.
1996-02-01
Scintillating fibers of type Bicron BCF-12 with 2 × 2 mm 2 cross section, up to 600 mm length, and PMMA cladding have been tested, in conjunction with the multi-channel photomultiplier Hamamatsu R 4760, with minimum ionizing electrons. The impact of cladding, extramural absorbers and/or wrapping on the light attenuation and photoelectron yield is studied in detail. Fibers have been circularly bent with radii of 171 mm and arranged in two layers to bundles forming granulated scintillator rings. Their performance in the EDDA experiment at COSY for detection of high energy protons revealed typically more than 9 (6) photoelectrons per fiber from bundles with (without) mirror on the rear side, guaranteeing detection efficiencies >99% and full compatibility with corresponding solid scintillator rings. The time resolution of 3.4 ns FWHM per fiber read out is essentially due to the R 4760.
Overweight, obesity and work functioning: the role of working-time arrangements.
Nigatu, Yeshambel T; van de Ven, Hardy A; van der Klink, Jac J L; Brouwer, Sandra; Reijneveld, Sijmen A; Bültmann, Ute
2016-01-01
Obesity is associated with productivity loss, but little is known about how obese workers function at work and also the role of working-time arrangements on this association is lacking. Therefore, the aim of this study was to examine the association of overweight and obesity with work functioning (WF), and to determine whether the associations differ between workers with different working-time arrangements. A cross-sectional study was conducted within the sampling frame of the 'Shift Your Work' study that examined the effect of irregular working-times in relation to health and functioning at work. We included N = 622 Dutch employees, of which N = 384 (62%) were shift-workers, N = 171 (27%) on-call workers and N = 67 (11%) day-workers. Overweight and obesity were defined as BMI 25-30 and ≥30, respectively. WF was assessed using the Work-Role Functioning Questionnaire. The prevalences of overweight and obesity were 48% and 10% in all workers, 49% and 11% in shift-workers, 45% and 10% in on-call workers, and 49% and 6% in day workers, respectively. In all workers, obesity was associated with lower WF scores for physical demands (adjusted estimate, aB = -5.5). In shift-workers, obesity was associated with lower WF scores for output and physical demands (aB = -8.8 and -6.8, respectively). In day and on-call workers, overweight and obesity were not associated with WF. Overweight and obesity are highly prevalent in the working population. Obesity might reduce the executive function performance beyond physical limitations, and limit the ability to accomplish tasks successfully, especially in shift workers. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.
LaMontagne, A D; Krnjacki, L; Kavanagh, A M; Bentley, R
2013-09-01
A number of widely prevalent job stressors have been identified as modifiable risk factors for common mental and physical illnesses such as depression and cardiovascular disease, yet there has been relatively little study of population trends in exposure to job stressors over time. The aims of this paper were to assess: (1) overall time trends in job control and security and (2) whether disparities by sex, age, skill level and employment arrangement were changing over time in the Australian working population. Job control and security were measured in eight annual waves (2000-2008) from the Australian nationally-representative Household Income and Labour Dynamics of Australia panel survey (n=13 188 unique individuals for control and n=13 182 for security). Observed and model-predicted time trends were generated. Models were generated using population-averaged longitudinal linear regression, with year fitted categorically. Changes in disparities over time by sex, age group, skill level and employment arrangement were tested as interactions between each of these stratifying variables and time. While significant disparities persisted for disadvantaged compared with advantaged groups, results suggested that inequalities in job control narrowed among young workers compared with older groups and for casual, fixed-term and self-employed compared with permanent workers. A slight narrowing of disparities over time in job security was noted for gender, age, employment arrangement and occupational skill level. Despite the favourable findings of small reductions in disparities in job control and security, significant cross-sectional disparities persist. Policy and practice intervention to improve psychosocial working conditions for disadvantaged groups could reduce these persisting disparities and associated illness burdens.
Smoking cessation treatment practices: recommendations for improved adoption on cardiology wards.
Berndt, Nadine C; Bolman, Catherine; de Vries, Hein; Segaar, Dewi; van Boven, Irene; Lechner, Lilian
2013-01-01
Smoking cessation treatment practices described by the 5 A's (ask, advise, assess, assist, arrange) are not well applied at cardiology wards because of various reasons, such as a lack of time and appropriate skills of the nursing staff. Therefore, a simplified guideline proposing an ask-advise-refer (AAR) strategy was introduced in Dutch cardiac wards. This study aimed to identify factors that determine the intentions of cardiac ward heads in adopting the simplified AAR guideline, as ward heads are key decision makers in the adoption of new guidelines. Ward heads' perceptions of current smoking cessation practices at the cardiac ward were also investigated. A cross-sectional survey with written questionnaires was conducted among heads of cardiology wards throughout the Netherlands, of whom 117 (64%) responded. According to the heads of cardiac wards, smoking cessation practices by cardiologists and nurses were mostly limited to brief practices that are easy to conduct. Only a minority offered intensive counseling or arranged follow-up contact. Heads with strong intentions of adopting the AAR guideline differed significantly on motivational and organizational attributes and perceived more smoking cessation assistance by other health professionals than did heads with weak intentions of adopting. Positive attitudes, social support toward adoption, and perception of much assistance at the ward were significantly associated with increased intentions to adopt the AAR guideline. Brief smoking cessation practices are adequately performed at cardiac wards, but the most effective practices, offering assistance and arranging for follow-up, are less than optimal. The AAR guideline offers a more feasible approach for busy cardiology wards. To ensure successful adoption of this guideline, the heads of cardiac wards should be convinced of its advantages and be encouraged by a supportive work environment. Policies may also facilitate the adoption of the AAR guideline.
Artazcoz, Lucía; Benach, Joan; Borrell, Carme; Cortès, Imma
2005-09-01
(1) To analyse the impact of flexible employment on mental health and job dissatisfaction; and (2) to examine the constraints imposed by flexible employment on men's and women's partnership formation and people's decision to become parents. For the two objectives the potentially different patterns by sex and social class are explored. Cross sectional health survey. Multiple logistic regression models separated for sex and social class (manual and non-manual workers) and controlling for age were fitted. Four types of contractual arrangements have been considered: permanent, fixed term temporary contract, non-fixed term temporary contract, and no contract. Catalonia (a region in the north east of Spain). Salaried workers interviewed in the 2002 Catalonian health survey with no longstanding limiting illness, aged 16-64 (1474 men and 998 women). Fixed term temporary contracts were not associated with poor mental health status. The impact of other forms of flexible employment on mental health depended on the type of contractual arrangement, sex, and social class and it was restricted to less privileged workers, women, and manual male workers. The impact of flexible employment on living arrangements was higher in men. Among both manual and non-manual male workers, those with fixed term temporary contracts were less likely to have children when married or cohabiting and, additionally, among non-manual male workers they also were more likely to remain single (aOR = 2.35; 95%CI = 1.13 to 4.90). Some forms of temporary contracts are related to adverse health and psychosocial outcomes with different patterns depending on the outcome analysed and on sex and social class. Future research should incorporate variables to capture situations of precariousness associated with flexible employment.
Practice, clinical management, and financial arrangements of practicing generalists.
Keating, Nancy L; Landon, Bruce E; Ayanian, John Z; Borbas, Catherine; Guadagnoli, Edward
2004-05-01
To describe the practice settings, financial arrangements, and management strategies experienced by generalist physicians and identify factors associated with reporting pressure to limit referrals, pressure to see more patients, and career dissatisfaction. Cross-sectional mail survey. Six hundred nineteen generalist physicians (62% response rate) caring for managed care patients in 3 Minnesota health plans during 1999. Twenty-six percent of physicians reported pressure to limit referrals. In adjusted analyses, female physicians and those who were board certified acted as gatekeepers for most of their patients, received incentives based on performance reports and quality profiles, and received direct income from capitation, and were more likely than others to report this pressure (all P <.05). Sixty-two percent reported pressure to see more patients. In adjusted analyses, this pressure was more frequent among physicians in practices owned by health systems, those using physician extenders, and among physicians paid by salary with performance adjustment or those receiving at least some capitation (all P <.05). One-quarter (24%) of physicians were dissatisfied with their career in medicine. In adjusted analyses, physicians reporting pressure to limit referrals (risk ratio, 1.12; 95% confidence interval, 1.01 to 1.19) and those reporting pressure to see more patients (risk ratio, 1.37; 95% confidence interval, 1.08 to 1.66) were more likely to be dissatisfied than other physicians. Pressures to limit referrals and to see more patients are common, particularly among physicians paid based on productivity or capitation, and they are associated with career dissatisfaction. Whether future changes in practice arrangements or compensation strategies can decrease such physician-reported pressures, and ultimately improve physician satisfaction, will be an important area for future study.
Sherson, Elaine A; Yakes Jimenez, Elizabeth; Katalanos, Nikki
2014-08-01
The 5 A's (Assess, Advise, Agree, Assist and Arrange) is a model that can be used by primary care physicians and practitioners to promote patient behaviour change. The 5 A's model is a viable intervention for encouraging weight management in response to the epidemic of obesity among patients. To identify and summarize quantitative research related to the 5 A's patients want to receive from their physicians during weight loss discussions and how frequently physicians use each practice. We conducted a systematic literature review of the MEDLINE/PubMed database using relevant keywords. Of 230 articles originally identified, 15 articles included quantitative research data from cross-sectional studies related to the aim of this review. Based on the available evidence, the majority of patients want to discuss weight loss with their physicians, with the Assist and Arrange aspects of the 5 A's being most desired. However, physicians most frequently Advise and Assess, and rarely Agree, Assist or Arrange. There are some significant limitations to the available evidence, including a limited number of studies addressing patient preference, inconsistent assessment of all aspects of the 5 A's, a lack of longitudinal designs and failure to take contextual factors such as patient and physician characteristics into account when interpreting study results. Future studies should address these limitations, document the outcomes that result from better physician training in lifestyle modification strategies and determine how to best routinely implement all aspects of the 5 A's for weight management in family practice settings. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Cross-regulation between Aurora B and Citron kinase controls midbody architecture in cytokinesis
McKenzie, Callum; Bassi, Zuni I.; Debski, Janusz; Gottardo, Marco; Callaini, Giuliano; Dadlez, Michal; D'Avino, Pier Paolo
2016-01-01
Cytokinesis culminates in the final separation, or abscission, of the two daughter cells at the end of cell division. Abscission relies on an organelle, the midbody, which forms at the intercellular bridge and is composed of various proteins arranged in a precise stereotypic pattern. The molecular mechanisms controlling midbody organization and function, however, are obscure. Here we show that proper midbody architecture requires cross-regulation between two cell division kinases, Citron kinase (CIT-K) and Aurora B, the kinase component of the chromosomal passenger complex (CPC). CIT-K interacts directly with three CPC components and is required for proper midbody architecture and the orderly arrangement of midbody proteins, including the CPC. In addition, we show that CIT-K promotes Aurora B activity through phosphorylation of the INCENP CPC subunit at the TSS motif. In turn, Aurora B controls CIT-K localization and association with its central spindle partners through phosphorylation of CIT-K's coiled coil domain. Our results identify, for the first time, a cross-regulatory mechanism between two kinases during cytokinesis, which is crucial for establishing the stereotyped organization of midbody proteins. PMID:27009191
Permanent-magnet flowmeter having improved output-terminal means
August, C.; Myers, H.J.
1981-10-26
Disclosed is an improved permanent magnet flowmeter capable of withstanding bending stresses in the direction of induced emf signals. The flowmeter includes a unique terminal arrangement integrally formed with the flowmeter by trepanning opposing wall sections of the flowmeter body. The terminal arrangement provides increased flowmeter sensitivity by increasing the strength of the induced emf signals.
37 CFR 1.154 - Arrangement of application elements in a design application.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Arrangement of application elements in a design application. 1.154 Section 1.154 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Design Patents § 1.154...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 3 2011-07-01 2011-07-01 false What are my reporting requirements under a non-arm's-length transportation arrangement? 1206.115 Section 1206.115 Mineral Resources OFFICE OF SURFACE... VALUATION Federal Oil § 1206.115 What are my reporting requirements under a non-arm's-length transportation...
27 CFR 6.42 - Indirect inducement through third party arrangements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Indirect inducement through third party arrangements. 6.42 Section 6.42 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Furnishing Things of Value § 6.42 Indirect inducement...
27 CFR 6.42 - Indirect inducement through third party arrangements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Indirect inducement through third party arrangements. 6.42 Section 6.42 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Unlawful Inducements Furnishing Things of Value § 6.42 Indirect inducement...
Your Home, Your Choice. A Workbook for Older People and Their Families.
ERIC Educational Resources Information Center
American Association of Retired Persons, Washington, DC.
This workbook was written for older Americans considering various living arrangements as they get older. It is designed to encourage older adults to take an active role in making decisions about their housing arrangements. An introductory checklist helps readers assess what aspects of housing are most important to them. Other sections explore ways…
Permanent magnet flowmeter having improved output terminal means
August, Charles; Myers, Harry J.
1984-01-01
Disclosed is an improved permanent magnet flowmeter capable of withstanding bending stresses in the direction of induced emf signals. The flowmeter includes a unique terminal arrangement integrally formed with the flowmeter by trepanning opposing wall sections of the flowmeter body. The terminal arrangement provides increased flowmeter sensitivity by increasing the strength of the induced emf signals.
Wilhelmi, Verena; Seiler, Anja; Lampp, Katrin; Neff, Andreas; Guthe, Michael; Lobachev, Oleg
2016-01-01
The arrangement of microvessels in human bone marrow is so far unknown. We combined monoclonal antibodies against CD34 and against CD141 to visualise all microvessel endothelia in 21 serial sections of about 1 cm2 size derived from a human iliac crest. The specimen was not decalcified and embedded in Technovit® 9100. In different regions of interest, the microvasculature was reconstructed in three dimensions using automatic methods. The three-dimensional models were subject to a rigid semiautomatic and manual quality control. In iliac crest bone marrow, the adipose tissue harbours irregularly distributed haematopoietic areas. These are fed by networks of large sinuses, which are loosely connected to networks of small capillaries prevailing in areas of pure adipose tissue. Our findings are compatible with the hypothesis that capillaries and sinuses in human iliac crest bone marrow are partially arranged in parallel. PMID:27997569
33 CFR 157.12g - Plan approval requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... must cover the arrangements and operation of the system as a whole and must specifically describe parts.... This documentation must include the vibration report for the control section of the monitoring section...
33 CFR 157.12g - Plan approval requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... must cover the arrangements and operation of the system as a whole and must specifically describe parts.... This documentation must include the vibration report for the control section of the monitoring section...
33 CFR 157.12g - Plan approval requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... must cover the arrangements and operation of the system as a whole and must specifically describe parts.... This documentation must include the vibration report for the control section of the monitoring section...
33 CFR 157.12g - Plan approval requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... must cover the arrangements and operation of the system as a whole and must specifically describe parts.... This documentation must include the vibration report for the control section of the monitoring section...
45 CFR 153.400 - Reinsurance contribution funds.
Code of Federal Regulations, 2014 CFR
2014-10-01
... section 223(d) of the Code; (vii) A health flexible spending arrangement within the meaning of section 125...) TRICARE and other military health benefits for active and retired uniformed services personnel and their...
Frequency Arrangement For 700 MHz Band
NASA Astrophysics Data System (ADS)
Ancans, G.; Bobrovs, V.; Ivanovs, G.
2015-02-01
The 694-790 MHz (700 MHz) band was allocated by the 2012 World Radiocommunication Conference (WRC-12) in ITU Region 1 (Europe included), to the mobile service on a co-primary basis with other services to which this band was allocated on the primary basis and identified for the International Mobile Telecommunications (IMT). At the same time, the countries of Region 1 will be able also to continue using these frequencies for their broadcasting services if necessary. This allocation will be effective immediately after 2015 World Radiocommunication Conference (WRC-15). In order to make the best possible use of this frequency band for mobile service, a worldwide harmonized frequency arrangement is to be prepared to allow for large economies of scale and international roaming as well as utilizing the available spectrum in the best possible way, minimizing possible interference between services, facilitating deployment and cross-border coordination. The authors analyze different possible frequency arrangements and conclude on the frequency arrangement most suitable for Europe.
Unsteady Flow Interactions Between Pitching Wings In Schooling Arrangements
NASA Astrophysics Data System (ADS)
Kurt, Melike; Moored, Keith
2017-11-01
In nature, many fish aggregate into large groups or schools for protection against predators, for social interactions and to save energy during migrations. Regardless of their prime motivation, fish experience three-dimensional flow interactions amongst themselves that can improve or hamper swimming performance and give rise to fluid-mediated forces between individuals. To date, the unsteady, three-dimensional flow interactions among schooling fish remains relatively unexplored. In order to study these interactions, the caudal fins of two interacting fish are idealized as two finite span pitching wings arranged in mixtures of canonical in-line and side-by-side arrangements. The forces and moments acting on the wings in the streamwise and cross-stream directions are quantified as the arrangement and the phase delay between the wings is altered. Particle image velocimetry is employed to characterize the flow physics during high efficiency locomotion. Finally, the forces and flowfields of two-dimensional pitching wings are compared with three-dimensional wings to distinguish how three-dimensionality alters the flow interactions in schools of fish.
Sectoral combustor for burning low-BTU fuel gas
Vogt, Robert L.
1980-01-01
A high-temperature combustor for burning low-BTU coal gas in a gas turbine is disclosed. The combustor includes several separately removable combustion chambers each having an annular sectoral cross section and a double-walled construction permitting separation of stresses due to pressure forces and stresses due to thermal effects. Arrangements are described for air-cooling each combustion chamber using countercurrent convective cooling flow between an outer shell wall and an inner liner wall and using film cooling flow through liner panel grooves and along the inner liner wall surface, and for admitting all coolant flow to the gas path within the inner liner wall. Also described are systems for supplying coal gas, combustion air, and dilution air to the combustion zone, and a liquid fuel nozzle for use during low-load operation. The disclosed combustor is fully air-cooled, requires no transition section to interface with a turbine nozzle, and is operable at firing temperatures of up to 3000.degree. F. or within approximately 300.degree. F. of the adiabatic stoichiometric limit of the coal gas used as fuel.
NASA Technical Reports Server (NTRS)
Wenzinger, Carl J; Harris, Thomas A
1940-01-01
Report presents the results of an investigation made in the NACA 7 by 10-foot wind tunnel of a large-chord NACA 23012 airfoil with several arrangements of venetian-blind flaps to determine the aerodynamic section characteristics as affected by the over-all flap chord, the chords of the slats used to form the flap, the slat spacing, the number of slats and the position of the flap with respect to the wing. Complete section data are given in the form of graphs for all the combinations tested.
Noise from Propellers with Symmetrical Sections at Zero Blade Angle
NASA Technical Reports Server (NTRS)
Deming, A F
1937-01-01
A theory has been deduced for the "rotation noise" from a propeller with blades of symmetrical section about the chord line and set at zero blade angle. Owing to the limitation of the theory, the equations give without appreciable error only the sound pressure for cases where the wave lengths are large compared with the blade lengths. With the aid of experimental data obtained from a two-blade arrangement, an empirical relation was introduced that permitted calculation of higher harmonics. The generality of the final relation given is indicated by the fundamental and second harmonic of a four-blade arrangement.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolmatov, Dima; Zhernenkov, Mikhail; Zav’yalov, Dmitry
Here in this work we report on terahertz phononic excitations in 2D gold nanoparticle arrays in a water matrix through a series of large-scale molecular dynamics simulations. For the first time, we observe acoustic Dirac-like crossings in H (H 2O) atomic (molecular) networks which emerge due to an intraband phononic scattering. These crossings are the phononic fingerprints of ice-like arrangements of H (H 2O) atomic (molecular) networks at nanometer scale. We reveal how phononic excitations in metallic nanoparticles and the water matrix reciprocally impact on one another providing the mechanism for the THz phononics manipulation via structural engineering. In addition,more » we show that by tuning the arrangement of 2D gold nanoparticle assemblies the Au phononic polarizations experience sub-terahertz hybridization (Kohn anomaly) due to surface electron-phonon relaxation processes. This opens the way for the sound control and manipulation in soft matter metamaterials at nanoscale.« less
26 CFR 1.482-7 - Methods to determine taxable income in connection with a cost sharing arrangement.
Code of Federal Regulations, 2012 CFR
2012-04-01
... regulations under section 482. For example, an arrangement for developing intangibles in which one controlled... controlled group, execute an agreement to jointly develop vaccine X and own the exclusive rights to... are members of the same controlled group, enter into a CSA. In the first year of the CSA, C and D...
26 CFR 1.482-7 - Methods to determine taxable income in connection with a cost sharing arrangement.
Code of Federal Regulations, 2014 CFR
2014-04-01
... regulations under section 482. For example, an arrangement for developing intangibles in which one controlled... controlled group, execute an agreement to jointly develop vaccine X and own the exclusive rights to... are members of the same controlled group, enter into a CSA. In the first year of the CSA, C and D...
26 CFR 1.482-7 - Methods to determine taxable income in connection with a cost sharing arrangement.
Code of Federal Regulations, 2013 CFR
2013-04-01
... regulations under section 482. For example, an arrangement for developing intangibles in which one controlled... controlled group, execute an agreement to jointly develop vaccine X and own the exclusive rights to... are members of the same controlled group, enter into a CSA. In the first year of the CSA, C and D...
Code of Federal Regulations, 2011 CFR
2011-04-01
... under section 482. For example, an arrangement for developing intangibles in which one controlled... members of the same controlled group, execute an agreement to jointly develop vaccine X and own the... Vaccine X. Example 3. Companies C and D, who are members of the same controlled group, enter into a CSA...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 9 2010-07-01 2010-07-01 false Annual reporting by multiple employer welfare arrangements and certain other entities offering or providing coverage for medical care to the employees of two or more employers. 2520.101-2 Section 2520.101-2 Labor Regulations Relating to Labor (Continued) EMPLOYEE...
Code of Federal Regulations, 2012 CFR
2012-10-01
... provide advance notice in order to obtain particular auxiliary aids and services or to arrange group... aids and services or to arrange group travel? (a) Except as provided in this section, as a PVO you must... particular auxiliary aids and services, you may request reasonable advance notice to guarantee the...
Code of Federal Regulations, 2014 CFR
2014-10-01
... provide advance notice in order to obtain particular auxiliary aids and services or to arrange group... aids and services or to arrange group travel? (a) Except as provided in this section, as a PVO you must... particular auxiliary aids and services, you may request reasonable advance notice to guarantee the...
Code of Federal Regulations, 2011 CFR
2011-10-01
... provide advance notice in order to obtain particular auxiliary aids and services or to arrange group... aids and services or to arrange group travel? (a) Except as provided in this section, as a PVO you must... particular auxiliary aids and services, you may request reasonable advance notice to guarantee the...
Code of Federal Regulations, 2013 CFR
2013-10-01
... provide advance notice in order to obtain particular auxiliary aids and services or to arrange group... aids and services or to arrange group travel? (a) Except as provided in this section, as a PVO you must... particular auxiliary aids and services, you may request reasonable advance notice to guarantee the...
Code of Federal Regulations, 2010 CFR
2010-10-01
... provide advance notice in order to obtain particular auxiliary aids and services or to arrange group... aids and services or to arrange group travel? (a) Except as provided in this section, as a PVO you must... particular auxiliary aids and services, you may request reasonable advance notice to guarantee the...